From 099f53cb50e45ef617a9f1d63ceec799e489418b Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Wed, 8 Apr 2009 14:28:37 -0700
Subject: async_tx: rename zero_sum to val

'zero_sum' does not properly describe the operation of generating parity
and checking that it validates against an existing buffer.  Change the
name of the operation to 'val' (for 'validate').  This is in
anticipation of the p+q case where it is a requirement to identify the
target parity buffers separately from the source buffers, because the
target parity buffers will not have corresponding pq coefficients.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-iop13xx/setup.c | 8 ++++----
 arch/arm/plat-iop/adma.c      | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index cfd4d2e6dac..9800228b71d 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -478,7 +478,7 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
@@ -490,7 +490,7 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
@@ -502,13 +502,13 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask);
+			dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
 			break;
 		}
 	}
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index f7242082161..c0400440e21 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -198,7 +198,7 @@ static int __init iop3xx_adma_cap_init(void)
 	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
 	#else
 	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_ZERO_SUM, iop3xx_aau_data.cap_mask);
+	dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask);
 	dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
 	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
 	#endif
-- 
cgit v1.2.3


From 849620fab413355eff48232eac5a8c53c57615c5 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 14 May 2009 17:10:52 +0200
Subject: Revert "oprofile: discover counters for op ppro too"

This reverts commit 59512900baab03c5629f2ff5efad1d5d4e682ece.

arch_perfmon_setup_counters() is actually never called for ppro, so
there is no code that changes the numbers in op_ppro_spec. The patch
as it is has no effect.

Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_ppro.c | 8 +++-----
 arch/x86/oprofile/op_x86_model.h  | 2 +-
 2 files changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 10131fbdaad..2a123990a84 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -213,9 +213,9 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 }
 
 
-struct op_x86_model_spec op_ppro_spec = {
-	.num_counters		= 2,	/* can be overriden */
-	.num_controls		= 2,	/* dito */
+struct op_x86_model_spec const op_ppro_spec = {
+	.num_counters		= 2,
+	.num_controls		= 2,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
 	.check_ctrs		= &ppro_check_ctrs,
@@ -251,8 +251,6 @@ void arch_perfmon_setup_counters(void)
 
 	op_arch_perfmon_spec.num_counters = num_counters;
 	op_arch_perfmon_spec.num_controls = num_counters;
-	op_ppro_spec.num_counters = num_counters;
-	op_ppro_spec.num_controls = num_counters;
 }
 
 struct op_x86_model_spec op_arch_perfmon_spec = {
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 825e79064d6..2317149c94f 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -45,7 +45,7 @@ struct op_x86_model_spec {
 	void (*shutdown)(struct op_msrs const * const msrs);
 };
 
-extern struct op_x86_model_spec op_ppro_spec;
+extern struct op_x86_model_spec const op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
 extern struct op_x86_model_spec const op_p4_ht2_spec;
 extern struct op_x86_model_spec const op_amd_spec;
-- 
cgit v1.2.3


From e419294ed3c98cccc145202e4fe165bfd8099d63 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Sun, 12 Oct 2008 15:12:34 -0400
Subject: x86/oprofile: moving arch_perfmon counter setup to
 op_x86_model_spec.init

The function arch_perfmon_init() in nmi_int.c is model specific. This
patch moves it to op_model_ppro.c by using the init function pointer
in struct op_x86_model_spec.

Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 21 +++++++++------------
 arch/x86/oprofile/op_model_ppro.c |  9 ++++++++-
 arch/x86/oprofile/op_x86_model.h  |  2 --
 3 files changed, 17 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3b285e656e2..dd8515301fb 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -427,7 +427,7 @@ static int __init ppro_init(char **cpu_type)
 		*cpu_type = "i386/core_2";
 		break;
 	case 26:
-		arch_perfmon_setup_counters();
+		model = &op_arch_perfmon_spec;
 		*cpu_type = "i386/core_i7";
 		break;
 	case 28:
@@ -442,16 +442,6 @@ static int __init ppro_init(char **cpu_type)
 	return 1;
 }
 
-static int __init arch_perfmon_init(char **cpu_type)
-{
-	if (!cpu_has_arch_perfmon)
-		return 0;
-	*cpu_type = "i386/arch_perfmon";
-	model = &op_arch_perfmon_spec;
-	arch_perfmon_setup_counters();
-	return 1;
-}
-
 /* in order to get sysfs right */
 static int using_nmi;
 
@@ -509,8 +499,15 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 			break;
 		}
 
-		if (!cpu_type && !arch_perfmon_init(&cpu_type))
+		if (cpu_type)
+			break;
+
+		if (!cpu_has_arch_perfmon)
 			return -ENODEV;
+
+		/* use arch perfmon as fallback */
+		cpu_type = "i386/arch_perfmon";
+		model = &op_arch_perfmon_spec;
 		break;
 
 	default:
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 2a123990a84..ae581196688 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -233,7 +233,7 @@ struct op_x86_model_spec const op_ppro_spec = {
  * the specific CPU.
  */
 
-void arch_perfmon_setup_counters(void)
+static void arch_perfmon_setup_counters(void)
 {
 	union cpuid10_eax eax;
 
@@ -253,7 +253,14 @@ void arch_perfmon_setup_counters(void)
 	op_arch_perfmon_spec.num_controls = num_counters;
 }
 
+static int arch_perfmon_init(struct oprofile_operations *ignore)
+{
+	arch_perfmon_setup_counters();
+	return 0;
+}
+
 struct op_x86_model_spec op_arch_perfmon_spec = {
+	.init			= &arch_perfmon_init,
 	/* num_counters/num_controls filled in at runtime */
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	/* user space does the cpuid check for available events */
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 2317149c94f..ed27783bb0d 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -51,6 +51,4 @@ extern struct op_x86_model_spec const op_p4_ht2_spec;
 extern struct op_x86_model_spec const op_amd_spec;
 extern struct op_x86_model_spec op_arch_perfmon_spec;
 
-extern void arch_perfmon_setup_counters(void);
-
 #endif /* OP_X86_MODEL_H */
-- 
cgit v1.2.3


From 06552ccc36abeb12e37efc16c384dc7f30794f85 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 28 May 2009 02:12:36 +0200
Subject: x86/oprofile: minor style changes in struct op_x86_model_spec

Some vertical alignments. Variables are now located in the beginning
of the struct.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_x86_model.h | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index ed27783bb0d..bd8157d12ff 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -32,17 +32,17 @@ struct pt_regs;
  * various x86 CPU models' perfctr support.
  */
 struct op_x86_model_spec {
-	int (*init)(struct oprofile_operations *ops);
-	void (*exit)(void);
-	unsigned int num_counters;
-	unsigned int num_controls;
-	void (*fill_in_addresses)(struct op_msrs * const msrs);
-	void (*setup_ctrs)(struct op_msrs const * const msrs);
-	int (*check_ctrs)(struct pt_regs * const regs,
-		struct op_msrs const * const msrs);
-	void (*start)(struct op_msrs const * const msrs);
-	void (*stop)(struct op_msrs const * const msrs);
-	void (*shutdown)(struct op_msrs const * const msrs);
+	unsigned int	num_counters;
+	unsigned int	num_controls;
+	int		(*init)(struct oprofile_operations *ops);
+	void		(*exit)(void);
+	void		(*fill_in_addresses)(struct op_msrs * const msrs);
+	void		(*setup_ctrs)(struct op_msrs const * const msrs);
+	int		(*check_ctrs)(struct pt_regs * const regs,
+				      struct op_msrs const * const msrs);
+	void		(*start)(struct op_msrs const * const msrs);
+	void		(*stop)(struct op_msrs const * const msrs);
+	void		(*shutdown)(struct op_msrs const * const msrs);
 };
 
 extern struct op_x86_model_spec const op_ppro_spec;
-- 
cgit v1.2.3


From 9063759540daac40cc1f402f83a3be6b489f8583 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 10 Mar 2009 19:15:57 +0100
Subject: x86/oprofile: remove #ifdefs in ibs functions

IBS code is moved to separate functions. This allows the removal
of #ifdefs in functions.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 80 +++++++++++++++++++++++-----------------
 1 file changed, 46 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 8fdf06e4edf..b54c0880b7d 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -220,6 +220,50 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	return 1;
 }
 
+static inline void op_amd_start_ibs(void)
+{
+	unsigned int low, high;
+	if (has_ibs && ibs_config.fetch_enabled) {
+		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
+			+ IBS_FETCH_HIGH_ENABLE;
+		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+	}
+
+	if (has_ibs && ibs_config.op_enabled) {
+		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
+			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
+			+ IBS_OP_LOW_ENABLE;
+		high = 0;
+		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+	}
+}
+
+static void op_amd_stop_ibs(void)
+{
+	unsigned int low, high;
+	if (has_ibs && ibs_config.fetch_enabled) {
+		/* clear max count and enable */
+		low = 0;
+		high = 0;
+		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+	}
+
+	if (has_ibs && ibs_config.op_enabled) {
+		/* clear max count and enable */
+		low = 0;
+		high = 0;
+		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+	}
+}
+
+#else
+
+static inline int op_amd_handle_ibs(struct pt_regs * const regs,
+				    struct op_msrs const * const msrs) { }
+static inline void op_amd_start_ibs(void) { }
+static inline void op_amd_stop_ibs(void) { }
+
 #endif
 
 static int op_amd_check_ctrs(struct pt_regs * const regs,
@@ -238,9 +282,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 		}
 	}
 
-#ifdef CONFIG_OPROFILE_IBS
 	op_amd_handle_ibs(regs, msrs);
-#endif
 
 	/* See op_model_ppro.c */
 	return 1;
@@ -258,25 +300,9 @@ static void op_amd_start(struct op_msrs const * const msrs)
 		}
 	}
 
-#ifdef CONFIG_OPROFILE_IBS
-	if (has_ibs && ibs_config.fetch_enabled) {
-		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
-		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
-			+ IBS_FETCH_HIGH_ENABLE;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-	}
-
-	if (has_ibs && ibs_config.op_enabled) {
-		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
-			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
-			+ IBS_OP_LOW_ENABLE;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
-	}
-#endif
+	op_amd_start_ibs();
 }
 
-
 static void op_amd_stop(struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
@@ -294,21 +320,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 		CTRL_WRITE(low, high, msrs, i);
 	}
 
-#ifdef CONFIG_OPROFILE_IBS
-	if (has_ibs && ibs_config.fetch_enabled) {
-		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-	}
-
-	if (has_ibs && ibs_config.op_enabled) {
-		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
-	}
-#endif
+	op_amd_stop_ibs();
 }
 
 static void op_amd_shutdown(struct op_msrs const * const msrs)
-- 
cgit v1.2.3


From d20f24c66011f8a397bca6c5d1a6a7c7e612d2d7 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Sun, 11 Jan 2009 13:01:16 +0100
Subject: x86/oprofile: simplify AMD cpu init code

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index dd8515301fb..ae0ab03959b 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -460,27 +460,26 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 		/* Needs to be at least an Athlon (or hammer in 32bit mode) */
 
 		switch (family) {
-		default:
-			return -ENODEV;
 		case 6:
-			model = &op_amd_spec;
 			cpu_type = "i386/athlon";
 			break;
 		case 0xf:
-			model = &op_amd_spec;
-			/* Actually it could be i386/hammer too, but give
-			 user space an consistent name. */
+			/*
+			 * Actually it could be i386/hammer too, but
+			 * give user space an consistent name.
+			 */
 			cpu_type = "x86-64/hammer";
 			break;
 		case 0x10:
-			model = &op_amd_spec;
 			cpu_type = "x86-64/family10";
 			break;
 		case 0x11:
-			model = &op_amd_spec;
 			cpu_type = "x86-64/family11h";
 			break;
+		default:
+			return -ENODEV;
 		}
+		model = &op_amd_spec;
 		break;
 
 	case X86_VENDOR_INTEL:
-- 
cgit v1.2.3


From ff9faa8b676e195476b86f03fe58db0f01bda8f3 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 May 2009 15:36:29 +0200
Subject: x86/oprofile: move common macros to op_x86_model.h

There are duplicate macro implementations in model specific code. This
patch moves all common macros to op_x86_model.h.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 8 --------
 arch/x86/oprofile/op_model_p4.c   | 2 --
 arch/x86/oprofile/op_model_ppro.c | 8 --------
 arch/x86/oprofile/op_x86_model.h  | 9 +++++++++
 4 files changed, 9 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index b54c0880b7d..4b9254a67e6 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -26,22 +26,14 @@
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
 
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
 #define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
 
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
 #define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
 #define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
 #define CTRL_CLEAR_LO(x) (x &= (1<<21))
 #define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
 #define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
 #define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 819b131fd75..420c15e7123 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -366,8 +366,6 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
 #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
 
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0)
 #define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0)
 #define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index ae581196688..a922a1a815c 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -26,19 +26,11 @@
 static int num_counters = 2;
 static int counter_width = 32;
 
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
 
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
 #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
 #define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
 #define CTRL_CLEAR(x) (x &= (1<<21))
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT(val, e) (val |= e)
 
 static u64 *reset_value;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index bd8157d12ff..c80ec7d0999 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -11,6 +11,15 @@
 #ifndef OP_X86_MODEL_H
 #define OP_X86_MODEL_H
 
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
+#define CTRL_SET_ENABLE(val) (val |= 1<<20)
+#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
+#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
+#define CTRL_SET_UM(val, m) (val |= (m << 8))
+#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+
 struct op_saved_msr {
 	unsigned int high;
 	unsigned int low;
-- 
cgit v1.2.3


From d2731a4387ad6c6bca07abfe9ed41d450fb6d665 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 May 2009 19:47:38 +0200
Subject: x86/oprofile: remove MSR macros for AMD cpus

The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 4b9254a67e6..c6181c265ae 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -26,12 +26,7 @@
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
 
-#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-
-#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
 #define CTRL_CLEAR_LO(x) (x &= (1<<21))
 #define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
 #define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
@@ -101,17 +96,17 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_CLEAR_LO(low);
 		CTRL_CLEAR_HI(high);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
 			continue;
-		CTR_WRITE(1, msrs, i);
+		wrmsr(msrs->counters[i].addr, -1, -1);
 	}
 
 	/* enable active counters */
@@ -119,9 +114,9 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 
-			CTR_WRITE(counter_config[i].count, msrs, i);
+			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
 
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_CLEAR_LO(low);
 			CTRL_CLEAR_HI(high);
 			CTRL_SET_ENABLE(low);
@@ -133,7 +128,7 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 			CTRL_SET_HOST_ONLY(high, 0);
 			CTRL_SET_GUEST_ONLY(high, 0);
 
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -267,10 +262,10 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	for (i = 0 ; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
-		CTR_READ(low, high, msrs, i);
+		rdmsr(msrs->counters[i].addr, low, high);
 		if (CTR_OVERFLOWED(low)) {
 			oprofile_add_sample(regs, i);
-			CTR_WRITE(reset_value[i], msrs, i);
+			wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
 		}
 	}
 
@@ -286,9 +281,9 @@ static void op_amd_start(struct op_msrs const * const msrs)
 	int i;
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (reset_value[i]) {
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_SET_ACTIVE(low);
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		}
 	}
 
@@ -307,9 +302,9 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (!reset_value[i])
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_SET_INACTIVE(low);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 
 	op_amd_stop_ibs();
-- 
cgit v1.2.3


From 74c9a5c341bb1f6cbb5095b07c77230f19682ce8 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 May 2009 19:47:38 +0200
Subject: x86/oprofile: remove MSR macros for ppro cpus

The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_ppro.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index a922a1a815c..6c5d288c566 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -27,9 +27,6 @@ static int num_counters = 2;
 static int counter_width = 32;
 
 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-
-#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
 #define CTRL_CLEAR(x) (x &= (1<<21))
 #define CTRL_SET_EVENT(val, e) (val |= e)
 
@@ -88,9 +85,9 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 	for (i = 0 ; i < num_counters; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_CLEAR(low);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
@@ -107,14 +104,14 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 
 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_CLEAR(low);
 			CTRL_SET_ENABLE(low);
 			CTRL_SET_USR(low, counter_config[i].user);
 			CTRL_SET_KERN(low, counter_config[i].kernel);
 			CTRL_SET_UM(low, counter_config[i].unit_mask);
 			CTRL_SET_EVENT(low, counter_config[i].event);
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -162,9 +159,9 @@ static void ppro_start(struct op_msrs const * const msrs)
 		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_SET_ACTIVE(low);
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		}
 	}
 }
@@ -180,9 +177,9 @@ static void ppro_stop(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_SET_INACTIVE(low);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 }
 
-- 
cgit v1.2.3


From 1131a478245b00664ae2dbc0f68db987b51fa806 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 20:23:23 +0200
Subject: x86/oprofile: remove MSR macros for p4 cpus

The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_p4.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 420c15e7123..365d8a9c03d 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -350,8 +350,6 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
 #define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
 #define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
-#define ESCR_READ(escr, high, ev, i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
-#define ESCR_WRITE(escr, high, ev, i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
 
 #define CCCR_RESERVED_BITS 0x38030FFF
 #define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
@@ -361,13 +359,9 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
 #define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
 #define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
-#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
-#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
 #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
 #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
 
-#define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0)
-#define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0)
 #define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
 
 
@@ -513,7 +507,7 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 		if (ev->bindings[i].virt_counter & counter_bit) {
 
 			/* modify ESCR */
-			ESCR_READ(escr, high, ev, i);
+			rdmsr(ev->bindings[i].escr_address, escr, high);
 			ESCR_CLEAR(escr);
 			if (stag == 0) {
 				ESCR_SET_USR_0(escr, counter_config[ctr].user);
@@ -524,10 +518,11 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 			}
 			ESCR_SET_EVENT_SELECT(escr, ev->event_select);
 			ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
-			ESCR_WRITE(escr, high, ev, i);
+			wrmsr(ev->bindings[i].escr_address, escr, high);
 
 			/* modify CCCR */
-			CCCR_READ(cccr, high, VIRT_CTR(stag, ctr));
+			rdmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
+			      cccr, high);
 			CCCR_CLEAR(cccr);
 			CCCR_SET_REQUIRED_BITS(cccr);
 			CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
@@ -535,7 +530,8 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 				CCCR_SET_PMI_OVF_0(cccr);
 			else
 				CCCR_SET_PMI_OVF_1(cccr);
-			CCCR_WRITE(cccr, high, VIRT_CTR(stag, ctr));
+			wrmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
+			      cccr, high);
 			return;
 		}
 	}
@@ -582,7 +578,8 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs)
 		if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
-			CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i));
+			wrmsr(p4_counters[VIRT_CTR(stag, i)].counter_address,
+			      -(u32)counter_config[i].count, -1);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -622,14 +619,16 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 
 		real = VIRT_CTR(stag, i);
 
-		CCCR_READ(low, high, real);
-		CTR_READ(ctr, high, real);
+		rdmsr(p4_counters[real].cccr_address, low, high);
+		rdmsr(p4_counters[real].counter_address, ctr, high);
 		if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
 			oprofile_add_sample(regs, i);
-			CTR_WRITE(reset_value[i], real);
+			wrmsr(p4_counters[real].counter_address,
+			      -(u32)reset_value[i], -1);
 			CCCR_CLEAR_OVF(low);
-			CCCR_WRITE(low, high, real);
-			CTR_WRITE(reset_value[i], real);
+			wrmsr(p4_counters[real].cccr_address, low, high);
+			wrmsr(p4_counters[real].counter_address,
+			      -(u32)reset_value[i], -1);
 		}
 	}
 
@@ -651,9 +650,9 @@ static void p4_start(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		CCCR_READ(low, high, VIRT_CTR(stag, i));
+		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 		CCCR_SET_ENABLE(low);
-		CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+		wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 	}
 }
 
@@ -668,9 +667,9 @@ static void p4_stop(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		CCCR_READ(low, high, VIRT_CTR(stag, i));
+		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 		CCCR_SET_DISABLE(low);
-		CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+		wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 	}
 }
 
-- 
cgit v1.2.3


From ec064c093e254f4433afb17dcef7f964c76436af Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 15:05:50 +0200
Subject: x86/oprofile: fix and cleanup CTRL_SET_* macros

This patch fixes missing braces around macro parameters. Macro
definitions from intel_arch_perfmon.h are used where possible.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_ppro.c |  1 -
 arch/x86/oprofile/op_x86_model.h  | 18 ++++++++++--------
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 6c5d288c566..61ee8f64053 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -18,7 +18,6 @@
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
-#include <asm/intel_arch_perfmon.h>
 
 #include "op_x86_model.h"
 #include "op_counter.h"
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index c80ec7d0999..a207b1c46e2 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -11,14 +11,16 @@
 #ifndef OP_X86_MODEL_H
 #define OP_X86_MODEL_H
 
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+#include <asm/intel_arch_perfmon.h>
+
+#define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
+#define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
+#define CTRL_SET_ACTIVE(val)		((val) |= ARCH_PERFMON_EVENTSEL0_ENABLE)
+#define CTRL_SET_ENABLE(val)		((val) |= ARCH_PERFMON_EVENTSEL_INT)
+#define CTRL_SET_INACTIVE(val)		((val) &= ~ARCH_PERFMON_EVENTSEL0_ENABLE)
+#define CTRL_SET_KERN(val, k)		((val) |= ((k) ? ARCH_PERFMON_EVENTSEL_OS : 0))
+#define CTRL_SET_USR(val, u)		((val) |= ((u) ? ARCH_PERFMON_EVENTSEL_USR : 0))
+#define CTRL_SET_UM(val, m)		((val) |= ((m) << 8))
 
 struct op_saved_msr {
 	unsigned int high;
-- 
cgit v1.2.3


From 9c59354b48ce9cf28048b02fea73dd0236f876ea Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 18:16:43 +0200
Subject: x86/oprofile: remove unused macros for AMD virtualization profiling

The use of the macros has no effect. The oprofilefs has to be extended
first to support these features.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index c6181c265ae..aaa7ffaed6b 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -31,8 +31,6 @@
 #define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
 #define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
 #define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
-#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
-#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
 
 static unsigned long reset_value[NUM_COUNTERS];
 
@@ -125,9 +123,6 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 			CTRL_SET_UM(low, counter_config[i].unit_mask);
 			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
 			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
-			CTRL_SET_HOST_ONLY(high, 0);
-			CTRL_SET_GUEST_ONLY(high, 0);
-
 			wrmsr(msrs->controls[i].addr, low, high);
 		} else {
 			reset_value[i] = 0;
-- 
cgit v1.2.3


From ef8828ddf828174785421af67c281144d4b8e796 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 19:31:44 +0200
Subject: x86/oprofile: pass the model to setup_ctrs() functions

In follow-on patches the setup_ctrs() functions will need data that
describes the model. This patch extends the function argument list to
pass a pointer of the model to these function.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 2 +-
 arch/x86/oprofile/op_model_amd.c  | 3 ++-
 arch/x86/oprofile/op_model_p4.c   | 3 ++-
 arch/x86/oprofile/op_model_ppro.c | 3 ++-
 arch/x86/oprofile/op_x86_model.h  | 3 ++-
 5 files changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index ae0ab03959b..c31f87bbf43 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -125,7 +125,7 @@ static void nmi_cpu_setup(void *dummy)
 	int cpu = smp_processor_id();
 	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
 	spin_lock(&oprofilefs_lock);
-	model->setup_ctrs(msrs);
+	model->setup_ctrs(model, msrs);
 	spin_unlock(&oprofilefs_lock);
 	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index aaa7ffaed6b..86e0a01ba12 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -85,7 +85,8 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 }
 
 
-static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
+static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
+			      struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 365d8a9c03d..05ba0287b1f 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -542,7 +542,8 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 }
 
 
-static void p4_setup_ctrs(struct op_msrs const * const msrs)
+static void p4_setup_ctrs(struct op_x86_model_spec const *model,
+			  struct op_msrs const * const msrs)
 {
 	unsigned int i;
 	unsigned int low, high;
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 61ee8f64053..40b44ee521d 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -51,7 +51,8 @@ static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 }
 
 
-static void ppro_setup_ctrs(struct op_msrs const * const msrs)
+static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
+			    struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index a207b1c46e2..6161c7f0e7f 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -48,7 +48,8 @@ struct op_x86_model_spec {
 	int		(*init)(struct oprofile_operations *ops);
 	void		(*exit)(void);
 	void		(*fill_in_addresses)(struct op_msrs * const msrs);
-	void		(*setup_ctrs)(struct op_msrs const * const msrs);
+	void		(*setup_ctrs)(struct op_x86_model_spec const *model,
+				      struct op_msrs const * const msrs);
 	int		(*check_ctrs)(struct pt_regs * const regs,
 				      struct op_msrs const * const msrs);
 	void		(*start)(struct op_msrs const * const msrs);
-- 
cgit v1.2.3


From 3370d358569755625aba4d9a846a040ce691d9ed Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 15:10:32 +0200
Subject: x86/oprofile: replace macros to calculate control register

This patch introduces op_x86_get_ctrl() to calculate the value of the
performance control register. This is generic code usable for all
models. The event and reserved masks are model specific and stored in
struct op_x86_model_spec. 64 bit MSR functions are used now. The patch
removes many hard to read macros used for ctrl calculation.

The function op_x86_get_ctrl() is common code and the first step to
further merge performance counter implementations for x86 models.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 20 +++++++++++++++++++
 arch/x86/oprofile/op_model_amd.c  | 41 +++++++++++++++------------------------
 arch/x86/oprofile/op_model_ppro.c | 29 +++++++++++++--------------
 arch/x86/oprofile/op_x86_model.h  | 15 ++++++++++----
 4 files changed, 60 insertions(+), 45 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index c31f87bbf43..388ee15e0e4 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -31,6 +31,26 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+/* common functions */
+
+u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+		    struct op_counter_config *counter_config)
+{
+	u64 val = 0;
+	u16 event = (u16)counter_config->event;
+
+	val |= ARCH_PERFMON_EVENTSEL_INT;
+	val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
+	val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
+	val |= (counter_config->unit_mask & 0xFF) << 8;
+	event &= model->event_mask ? model->event_mask : 0xFF;
+	val |= event & 0xFF;
+	val |= (event & 0x0F00) << 24;
+
+	return val;
+}
+
+
 static int profile_exceptions_notify(struct notifier_block *self,
 				     unsigned long val, void *data)
 {
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 86e0a01ba12..2406ab86360 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -25,12 +25,11 @@
 
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
+#define OP_EVENT_MASK			0x0FFF
+
+#define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-#define CTRL_CLEAR_LO(x) (x &= (1<<21))
-#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
-#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
-#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
 
 static unsigned long reset_value[NUM_COUNTERS];
 
@@ -84,21 +83,19 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 	}
 }
 
-
 static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 			      struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	/* clear all counters */
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_CLEAR_LO(low);
-		CTRL_CLEAR_HI(high);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
@@ -112,19 +109,11 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
-
 			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
-
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_CLEAR_LO(low);
-			CTRL_CLEAR_HI(high);
-			CTRL_SET_ENABLE(low);
-			CTRL_SET_USR(low, counter_config[i].user);
-			CTRL_SET_KERN(low, counter_config[i].kernel);
-			CTRL_SET_UM(low, counter_config[i].unit_mask);
-			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
-			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val &= model->reserved;
+			val |= op_x86_get_ctrl(model, &counter_config[i]);
+			wrmsrl(msrs->controls[i].addr, val);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -486,14 +475,16 @@ static void op_amd_exit(void) {}
 #endif /* CONFIG_OPROFILE_IBS */
 
 struct op_x86_model_spec const op_amd_spec = {
-	.init			= op_amd_init,
-	.exit			= op_amd_exit,
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
+	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
+	.event_mask		= OP_EVENT_MASK,
+	.init			= op_amd_init,
+	.exit			= op_amd_exit,
 	.fill_in_addresses	= &op_amd_fill_in_addresses,
 	.setup_ctrs		= &op_amd_setup_ctrs,
 	.check_ctrs		= &op_amd_check_ctrs,
 	.start			= &op_amd_start,
 	.stop			= &op_amd_stop,
-	.shutdown		= &op_amd_shutdown
+	.shutdown		= &op_amd_shutdown,
 };
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 40b44ee521d..3092f998baf 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -10,6 +10,7 @@
  * @author Philippe Elie
  * @author Graydon Hoare
  * @author Andi Kleen
+ * @author Robert Richter <robert.richter@amd.com>
  */
 
 #include <linux/oprofile.h>
@@ -26,8 +27,8 @@ static int num_counters = 2;
 static int counter_width = 32;
 
 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-#define CTRL_CLEAR(x) (x &= (1<<21))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+
+#define MSR_PPRO_EVENTSEL_RESERVED	((0xFFFFFFFFULL<<32)|(1ULL<<21))
 
 static u64 *reset_value;
 
@@ -54,7 +55,7 @@ static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 			    struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	if (!reset_value) {
@@ -85,9 +86,9 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0 ; i < num_counters; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_CLEAR(low);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
@@ -101,17 +102,11 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0; i < num_counters; ++i) {
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
-
 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_CLEAR(low);
-			CTRL_SET_ENABLE(low);
-			CTRL_SET_USR(low, counter_config[i].user);
-			CTRL_SET_KERN(low, counter_config[i].kernel);
-			CTRL_SET_UM(low, counter_config[i].unit_mask);
-			CTRL_SET_EVENT(low, counter_config[i].event);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val &= model->reserved;
+			val |= op_x86_get_ctrl(model, &counter_config[i]);
+			wrmsrl(msrs->controls[i].addr, val);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -205,6 +200,7 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec const op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
+	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
 	.check_ctrs		= &ppro_check_ctrs,
@@ -249,6 +245,7 @@ static int arch_perfmon_init(struct oprofile_operations *ignore)
 }
 
 struct op_x86_model_spec op_arch_perfmon_spec = {
+	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.init			= &arch_perfmon_init,
 	/* num_counters/num_controls filled in at runtime */
 	.fill_in_addresses	= &ppro_fill_in_addresses,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 6161c7f0e7f..3220d4ce632 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -6,21 +6,19 @@
  * @remark Read the file COPYING
  *
  * @author Graydon Hoare
+ * @author Robert Richter <robert.richter@amd.com>
  */
 
 #ifndef OP_X86_MODEL_H
 #define OP_X86_MODEL_H
 
+#include <asm/types.h>
 #include <asm/intel_arch_perfmon.h>
 
 #define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
 #define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
 #define CTRL_SET_ACTIVE(val)		((val) |= ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_ENABLE(val)		((val) |= ARCH_PERFMON_EVENTSEL_INT)
 #define CTRL_SET_INACTIVE(val)		((val) &= ~ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_KERN(val, k)		((val) |= ((k) ? ARCH_PERFMON_EVENTSEL_OS : 0))
-#define CTRL_SET_USR(val, u)		((val) |= ((u) ? ARCH_PERFMON_EVENTSEL_USR : 0))
-#define CTRL_SET_UM(val, m)		((val) |= ((m) << 8))
 
 struct op_saved_msr {
 	unsigned int high;
@@ -39,12 +37,16 @@ struct op_msrs {
 
 struct pt_regs;
 
+struct oprofile_operations;
+
 /* The model vtable abstracts the differences between
  * various x86 CPU models' perfctr support.
  */
 struct op_x86_model_spec {
 	unsigned int	num_counters;
 	unsigned int	num_controls;
+	u64		reserved;
+	u16		event_mask;
 	int		(*init)(struct oprofile_operations *ops);
 	void		(*exit)(void);
 	void		(*fill_in_addresses)(struct op_msrs * const msrs);
@@ -57,6 +59,11 @@ struct op_x86_model_spec {
 	void		(*shutdown)(struct op_msrs const * const msrs);
 };
 
+struct op_counter_config;
+
+extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+			   struct op_counter_config *counter_config);
+
 extern struct op_x86_model_spec const op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
 extern struct op_x86_model_spec const op_p4_ht2_spec;
-- 
cgit v1.2.3


From 42399adb239d4f1413899cc618ecf640779e79df Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 17:59:06 +0200
Subject: x86/oprofile: replace CTR_OVERFLOWED macros

The patch replaces all CTR_OVERFLOWED macros. 64 bit MSR functions and
64 bit counter values are used now. Thus, it will be easier to later
extend the models to use more than 32 bit width counters.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 16 ++++++++--------
 arch/x86/oprofile/op_model_p4.c   |  6 +++---
 arch/x86/oprofile/op_model_ppro.c | 10 ++++------
 3 files changed, 15 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 2406ab86360..b5d678fbf03 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -26,11 +26,10 @@
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
 #define OP_EVENT_MASK			0x0FFF
+#define OP_CTR_OVERFLOW			(1ULL<<31)
 
 #define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
-#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-
 static unsigned long reset_value[NUM_COUNTERS];
 
 #ifdef CONFIG_OPROFILE_IBS
@@ -241,17 +240,18 @@ static inline void op_amd_stop_ibs(void) { }
 static int op_amd_check_ctrs(struct pt_regs * const regs,
 			     struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	for (i = 0 ; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
-		rdmsr(msrs->counters[i].addr, low, high);
-		if (CTR_OVERFLOWED(low)) {
-			oprofile_add_sample(regs, i);
-			wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
-		}
+		rdmsrl(msrs->counters[i].addr, val);
+		/* bit is clear if overflowed: */
+		if (val & OP_CTR_OVERFLOW)
+			continue;
+		oprofile_add_sample(regs, i);
+		wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 05ba0287b1f..ac4ca28b9ed 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -32,6 +32,8 @@
 #define NUM_CCCRS_HT2 9
 #define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2)
 
+#define OP_CTR_OVERFLOW			(1ULL<<31)
+
 static unsigned int num_counters = NUM_COUNTERS_NON_HT;
 static unsigned int num_controls = NUM_CONTROLS_NON_HT;
 
@@ -362,8 +364,6 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
 #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
 
-#define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
-
 
 /* this assigns a "stagger" to the current CPU, which is used throughout
    the code in this module as an extra array offset, to select the "even"
@@ -622,7 +622,7 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 
 		rdmsr(p4_counters[real].cccr_address, low, high);
 		rdmsr(p4_counters[real].counter_address, ctr, high);
-		if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
+		if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
 			oprofile_add_sample(regs, i);
 			wrmsr(p4_counters[real].counter_address,
 			      -(u32)reset_value[i], -1);
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 3092f998baf..82db396dc3e 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -26,8 +26,6 @@
 static int num_counters = 2;
 static int counter_width = 32;
 
-#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-
 #define MSR_PPRO_EVENTSEL_RESERVED	((0xFFFFFFFFULL<<32)|(1ULL<<21))
 
 static u64 *reset_value;
@@ -124,10 +122,10 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
-		if (CTR_OVERFLOWED(val)) {
-			oprofile_add_sample(regs, i);
-			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-		}
+		if (val & (1ULL << (counter_width - 1)))
+			continue;
+		oprofile_add_sample(regs, i);
+		wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 	}
 
 	/* Only P6 based Pentium M need to re-unmask the apic vector but it
-- 
cgit v1.2.3


From dea3766ca052a4f572b16a23a322553c064d75af Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 18:11:52 +0200
Subject: x86/oprofile: replace CTRL_SET_*ACTIVE macros

The patch replaces all CTRL_SET_*ACTIVE macros. 64 bit MSR functions
and 64 bit counter values are used now. The code uses bit masks from
<asm/intel_arch_perfmon.h>.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 16 ++++++++--------
 arch/x86/oprofile/op_model_ppro.c | 16 ++++++++--------
 arch/x86/oprofile/op_x86_model.h  |  2 --
 3 files changed, 16 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index b5d678fbf03..4ac9d283e8d 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -262,13 +262,13 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 
 static void op_amd_start(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (reset_value[i]) {
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_SET_ACTIVE(low);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
 
@@ -277,7 +277,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 
 static void op_amd_stop(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	/*
@@ -287,9 +287,9 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (!reset_value[i])
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_SET_INACTIVE(low);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	op_amd_stop_ibs();
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 82db396dc3e..566b43f0b6c 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -145,16 +145,16 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 
 static void ppro_start(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	if (!reset_value)
 		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_SET_ACTIVE(low);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
 }
@@ -162,7 +162,7 @@ static void ppro_start(struct op_msrs const * const msrs)
 
 static void ppro_stop(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	if (!reset_value)
@@ -170,9 +170,9 @@ static void ppro_stop(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_SET_INACTIVE(low);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
 
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 3220d4ce632..1c4577795a9 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -17,8 +17,6 @@
 
 #define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
 #define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
-#define CTRL_SET_ACTIVE(val)		((val) |= ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_INACTIVE(val)		((val) &= ~ARCH_PERFMON_EVENTSEL0_ENABLE)
 
 struct op_saved_msr {
 	unsigned int high;
-- 
cgit v1.2.3


From 217d3cfb959756cb493fc03106c0253baa420ce8 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 4 Jun 2009 02:36:44 +0200
Subject: x86/oprofile: replace CTR*_IS_RESERVED macros

The patch replaces all CTR*_IS_RESERVED macros.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 10 +++++-----
 arch/x86/oprofile/op_model_p4.c   | 10 +++++-----
 arch/x86/oprofile/op_model_ppro.c | 10 +++++-----
 arch/x86/oprofile/op_x86_model.h  |  3 ---
 4 files changed, 15 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 4ac9d283e8d..c5c5eec2fa7 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -90,7 +90,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear all counters */
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= model->reserved;
@@ -99,14 +99,14 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->counters[i].addr))
 			continue;
 		wrmsr(msrs->counters[i].addr, -1, -1);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
+		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
 			rdmsrl(msrs->controls[i].addr, val);
@@ -300,11 +300,11 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
-		if (CTR_IS_RESERVED(msrs, i))
+		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
 	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
-		if (CTRL_IS_RESERVED(msrs, i))
+		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
 }
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index ac4ca28b9ed..9db0ca9af76 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -559,7 +559,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear the cccrs we will use */
 	for (i = 0 ; i < num_counters ; i++) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 		CCCR_CLEAR(low);
@@ -569,14 +569,14 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear all escrs (including those outside our concern) */
 	for (i = num_counters; i < num_controls; i++) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		wrmsr(msrs->controls[i].addr, 0, 0);
 	}
 
 	/* setup all counters */
 	for (i = 0 ; i < num_counters ; ++i) {
-		if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) {
+		if (counter_config[i].enabled && msrs->controls[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
 			wrmsr(p4_counters[VIRT_CTR(stag, i)].counter_address,
@@ -679,7 +679,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < num_counters ; ++i) {
-		if (CTR_IS_RESERVED(msrs, i))
+		if (msrs->counters[i].addr)
 			release_perfctr_nmi(msrs->counters[i].addr);
 	}
 	/*
@@ -688,7 +688,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 	 * This saves a few bits.
 	 */
 	for (i = num_counters ; i < num_controls ; ++i) {
-		if (CTRL_IS_RESERVED(msrs, i))
+		if (msrs->controls[i].addr)
 			release_evntsel_nmi(msrs->controls[i].addr);
 	}
 }
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 566b43f0b6c..0a261a5c696 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -82,7 +82,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear all counters */
 	for (i = 0 ; i < num_counters; ++i) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= model->reserved;
@@ -91,14 +91,14 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < num_counters; ++i) {
-		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->counters[i].addr))
 			continue;
 		wrmsrl(msrs->counters[i].addr, -1LL);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < num_counters; ++i) {
-		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
+		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 			rdmsrl(msrs->controls[i].addr, val);
@@ -181,11 +181,11 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < num_counters ; ++i) {
-		if (CTR_IS_RESERVED(msrs, i))
+		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
 	for (i = 0 ; i < num_counters ; ++i) {
-		if (CTRL_IS_RESERVED(msrs, i))
+		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
 	if (reset_value) {
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 1c4577795a9..69f1eb46e1b 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -15,9 +15,6 @@
 #include <asm/types.h>
 #include <asm/intel_arch_perfmon.h>
 
-#define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
-#define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
-
 struct op_saved_msr {
 	unsigned int high;
 	unsigned int low;
-- 
cgit v1.2.3


From bbc5986d2db427fdd61b6116ff8b9ed988e663a8 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 17:38:19 +0200
Subject: x86/oprofile: use 64 bit wrmsr functions

This patch replaces some wrmsr() functions with wrmsrl().

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c |  7 ++++---
 arch/x86/oprofile/op_model_p4.c  | 12 ++++++------
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index c5c5eec2fa7..9bf90176241 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -101,14 +101,15 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (unlikely(!msrs->counters[i].addr))
 			continue;
-		wrmsr(msrs->counters[i].addr, -1, -1);
+		wrmsrl(msrs->counters[i].addr, -1LL);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
-			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
+			wrmsrl(msrs->counters[i].addr,
+			       -(s64)counter_config[i].count);
 			rdmsrl(msrs->controls[i].addr, val);
 			val &= model->reserved;
 			val |= op_x86_get_ctrl(model, &counter_config[i]);
@@ -251,7 +252,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 		if (val & OP_CTR_OVERFLOW)
 			continue;
 		oprofile_add_sample(regs, i);
-		wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
+		wrmsrl(msrs->counters[i].addr, -(s64)reset_value[i]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 9db0ca9af76..f01e53b118f 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -579,8 +579,8 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 		if (counter_config[i].enabled && msrs->controls[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
-			wrmsr(p4_counters[VIRT_CTR(stag, i)].counter_address,
-			      -(u32)counter_config[i].count, -1);
+			wrmsrl(p4_counters[VIRT_CTR(stag, i)].counter_address,
+			       -(s64)counter_config[i].count);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -624,12 +624,12 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 		rdmsr(p4_counters[real].counter_address, ctr, high);
 		if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
 			oprofile_add_sample(regs, i);
-			wrmsr(p4_counters[real].counter_address,
-			      -(u32)reset_value[i], -1);
+			wrmsrl(p4_counters[real].counter_address,
+			       -(s64)reset_value[i]);
 			CCCR_CLEAR_OVF(low);
 			wrmsr(p4_counters[real].cccr_address, low, high);
-			wrmsr(p4_counters[real].counter_address,
-			      -(u32)reset_value[i], -1);
+			wrmsrl(p4_counters[real].counter_address,
+			       -(s64)reset_value[i]);
 		}
 	}
 
-- 
cgit v1.2.3


From 95e74e62c1540b1115fe8cec5b592f22960f2bb2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 3 Jun 2009 19:09:27 +0200
Subject: x86/oprofile: use 64 bit values to save MSR states

This patch removes struct op_saved_msr and replaces it by an u64
variable. This makes code easier and it is possible to use 64 bit MSR
functions.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c      | 28 ++++++++--------------------
 arch/x86/oprofile/op_x86_model.h |  9 ++-------
 2 files changed, 10 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 388ee15e0e4..3b84b789de0 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -78,19 +78,13 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	unsigned int i;
 
 	for (i = 0; i < nr_ctrs; ++i) {
-		if (counters[i].addr) {
-			rdmsr(counters[i].addr,
-				counters[i].saved.low,
-				counters[i].saved.high);
-		}
+		if (counters[i].addr)
+			rdmsrl(counters[i].addr, counters[i].saved);
 	}
 
 	for (i = 0; i < nr_ctrls; ++i) {
-		if (controls[i].addr) {
-			rdmsr(controls[i].addr,
-				controls[i].saved.low,
-				controls[i].saved.high);
-		}
+		if (controls[i].addr)
+			rdmsrl(controls[i].addr, controls[i].saved);
 	}
 }
 
@@ -204,19 +198,13 @@ static void nmi_restore_registers(struct op_msrs *msrs)
 	unsigned int i;
 
 	for (i = 0; i < nr_ctrls; ++i) {
-		if (controls[i].addr) {
-			wrmsr(controls[i].addr,
-				controls[i].saved.low,
-				controls[i].saved.high);
-		}
+		if (controls[i].addr)
+			wrmsrl(controls[i].addr, controls[i].saved);
 	}
 
 	for (i = 0; i < nr_ctrs; ++i) {
-		if (counters[i].addr) {
-			wrmsr(counters[i].addr,
-				counters[i].saved.low,
-				counters[i].saved.high);
-		}
+		if (counters[i].addr)
+			wrmsrl(counters[i].addr, counters[i].saved);
 	}
 }
 
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 69f1eb46e1b..fda52b4c1b9 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -15,14 +15,9 @@
 #include <asm/types.h>
 #include <asm/intel_arch_perfmon.h>
 
-struct op_saved_msr {
-	unsigned int high;
-	unsigned int low;
-};
-
 struct op_msr {
-	unsigned long addr;
-	struct op_saved_msr saved;
+	unsigned long	addr;
+	u64		saved;
 };
 
 struct op_msrs {
-- 
cgit v1.2.3


From 1a245c45343651a87ff63afc5ddeb8e24d731835 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 5 Jun 2009 15:54:24 +0200
Subject: x86/oprofile: remove some local variables in MSR save/restore
 functions

The patch removes some local variables in these functions.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3b84b789de0..80b63d5db50 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -71,18 +71,16 @@ static int profile_exceptions_notify(struct notifier_block *self,
 
 static void nmi_cpu_save_registers(struct op_msrs *msrs)
 {
-	unsigned int const nr_ctrs = model->num_counters;
-	unsigned int const nr_ctrls = model->num_controls;
 	struct op_msr *counters = msrs->counters;
 	struct op_msr *controls = msrs->controls;
 	unsigned int i;
 
-	for (i = 0; i < nr_ctrs; ++i) {
+	for (i = 0; i < model->num_counters; ++i) {
 		if (counters[i].addr)
 			rdmsrl(counters[i].addr, counters[i].saved);
 	}
 
-	for (i = 0; i < nr_ctrls; ++i) {
+	for (i = 0; i < model->num_controls; ++i) {
 		if (controls[i].addr)
 			rdmsrl(controls[i].addr, controls[i].saved);
 	}
@@ -191,18 +189,16 @@ static int nmi_setup(void)
 
 static void nmi_restore_registers(struct op_msrs *msrs)
 {
-	unsigned int const nr_ctrs = model->num_counters;
-	unsigned int const nr_ctrls = model->num_controls;
 	struct op_msr *counters = msrs->counters;
 	struct op_msr *controls = msrs->controls;
 	unsigned int i;
 
-	for (i = 0; i < nr_ctrls; ++i) {
+	for (i = 0; i < model->num_controls; ++i) {
 		if (controls[i].addr)
 			wrmsrl(controls[i].addr, controls[i].saved);
 	}
 
-	for (i = 0; i < nr_ctrs; ++i) {
+	for (i = 0; i < model->num_counters; ++i) {
 		if (counters[i].addr)
 			wrmsrl(counters[i].addr, counters[i].saved);
 	}
-- 
cgit v1.2.3


From c572ae4efd1b0a5cc76c5e6aae05c1b182b6a69c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 3 Jun 2009 20:10:39 +0200
Subject: x86/oprofile: use 64 bit values in IBS functions

The IBS code internally uses 32 bit values (a low and a high value) to
represent a 64 bit value. This patch changes this and now 64 bit
values are used instead. 64 bit MSR functions can be used now.

No functional changes.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 131 ++++++++++++++++++---------------------
 1 file changed, 61 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 9bf90176241..6493ef7ae9a 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -35,16 +35,18 @@ static unsigned long reset_value[NUM_COUNTERS];
 #ifdef CONFIG_OPROFILE_IBS
 
 /* IbsFetchCtl bits/masks */
-#define IBS_FETCH_HIGH_VALID_BIT	(1UL << 17)	/* bit 49 */
-#define IBS_FETCH_HIGH_ENABLE		(1UL << 16)	/* bit 48 */
-#define IBS_FETCH_LOW_MAX_CNT_MASK	0x0000FFFFUL	/* MaxCnt mask */
+#define IBS_FETCH_RAND_EN		(1ULL<<57)
+#define IBS_FETCH_VAL			(1ULL<<49)
+#define IBS_FETCH_ENABLE		(1ULL<<48)
+#define IBS_FETCH_CNT_MASK		0xFFFF0000ULL
 
 /*IbsOpCtl bits */
-#define IBS_OP_LOW_VALID_BIT		(1ULL<<18)	/* bit 18 */
-#define IBS_OP_LOW_ENABLE		(1ULL<<17)	/* bit 17 */
+#define IBS_OP_CNT_CTL			(1ULL<<19)
+#define IBS_OP_VAL			(1ULL<<18)
+#define IBS_OP_ENABLE			(1ULL<<17)
 
-#define IBS_FETCH_SIZE	6
-#define IBS_OP_SIZE	12
+#define IBS_FETCH_SIZE			6
+#define IBS_OP_SIZE			12
 
 static int has_ibs;	/* AMD Family10h and later */
 
@@ -126,66 +128,63 @@ static inline int
 op_amd_handle_ibs(struct pt_regs * const regs,
 		  struct op_msrs const * const msrs)
 {
-	u32 low, high;
-	u64 msr;
+	u64 val, ctl;
 	struct op_entry entry;
 
 	if (!has_ibs)
 		return 1;
 
 	if (ibs_config.fetch_enabled) {
-		rdmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-		if (high & IBS_FETCH_HIGH_VALID_BIT) {
-			rdmsrl(MSR_AMD64_IBSFETCHLINAD, msr);
-			oprofile_write_reserve(&entry, regs, msr,
+		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
+		if (ctl & IBS_FETCH_VAL) {
+			rdmsrl(MSR_AMD64_IBSFETCHLINAD, val);
+			oprofile_write_reserve(&entry, regs, val,
 					       IBS_FETCH_CODE, IBS_FETCH_SIZE);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			oprofile_add_data(&entry, low);
-			oprofile_add_data(&entry, high);
-			rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data(&entry, (u32)ctl);
+			oprofile_add_data(&entry, (u32)(ctl >> 32));
+			rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			high &= ~IBS_FETCH_HIGH_VALID_BIT;
-			high |= IBS_FETCH_HIGH_ENABLE;
-			low &= IBS_FETCH_LOW_MAX_CNT_MASK;
-			wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT_MASK);
+			ctl |= IBS_FETCH_ENABLE;
+			wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
 		}
 	}
 
 	if (ibs_config.op_enabled) {
-		rdmsr(MSR_AMD64_IBSOPCTL, low, high);
-		if (low & IBS_OP_LOW_VALID_BIT) {
-			rdmsrl(MSR_AMD64_IBSOPRIP, msr);
-			oprofile_write_reserve(&entry, regs, msr,
+		rdmsrl(MSR_AMD64_IBSOPCTL, ctl);
+		if (ctl & IBS_OP_VAL) {
+			rdmsrl(MSR_AMD64_IBSOPRIP, val);
+			oprofile_write_reserve(&entry, regs, val,
 					       IBS_OP_CODE, IBS_OP_SIZE);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSOPDATA, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSOPDATA2, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSOPDATA3, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSDCLINAD, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSDCPHYSAD, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSOPDATA, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSOPDATA2, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSOPDATA3, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSDCLINAD, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSDCPHYSAD, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			high = 0;
-			low &= ~IBS_OP_LOW_VALID_BIT;
-			low |= IBS_OP_LOW_ENABLE;
-			wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+			ctl &= ~IBS_OP_VAL & 0xFFFFFFFF;
+			ctl |= IBS_OP_ENABLE;
+			wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
 		}
 	}
 
@@ -194,39 +193,31 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 
 static inline void op_amd_start_ibs(void)
 {
-	unsigned int low, high;
+	u64 val;
 	if (has_ibs && ibs_config.fetch_enabled) {
-		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
-		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
-			+ IBS_FETCH_HIGH_ENABLE;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+		val = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+		val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
+		val |= IBS_FETCH_ENABLE;
+		wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
 	}
 
 	if (has_ibs && ibs_config.op_enabled) {
-		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
-			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
-			+ IBS_OP_LOW_ENABLE;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+		val = (ibs_config.max_cnt_op >> 4) & 0xFFFF;
+		val |= ibs_config.dispatched_ops ? IBS_OP_CNT_CTL : 0;
+		val |= IBS_OP_ENABLE;
+		wrmsrl(MSR_AMD64_IBSOPCTL, val);
 	}
 }
 
 static void op_amd_stop_ibs(void)
 {
-	unsigned int low, high;
-	if (has_ibs && ibs_config.fetch_enabled) {
+	if (has_ibs && ibs_config.fetch_enabled)
 		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-	}
+		wrmsrl(MSR_AMD64_IBSFETCHCTL, 0);
 
-	if (has_ibs && ibs_config.op_enabled) {
+	if (has_ibs && ibs_config.op_enabled)
 		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
-	}
+		wrmsrl(MSR_AMD64_IBSOPCTL, 0);
 }
 
 #else
-- 
cgit v1.2.3


From 51563a0e5650d0d76539625388d72d62b34c726e Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 3 Jun 2009 20:54:56 +0200
Subject: x86/oprofile: introduce oprofile_add_data64()

The IBS implemention writes 64 bit register values to the cpu buffer
by writing two 32 values using oprofile_add_data(). This patch
introduces oprofile_add_data64() to write a single 64 bit value to the
buffer.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 6493ef7ae9a..cc930467575 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -140,13 +140,10 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			rdmsrl(MSR_AMD64_IBSFETCHLINAD, val);
 			oprofile_write_reserve(&entry, regs, val,
 					       IBS_FETCH_CODE, IBS_FETCH_SIZE);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
-			oprofile_add_data(&entry, (u32)ctl);
-			oprofile_add_data(&entry, (u32)(ctl >> 32));
+			oprofile_add_data64(&entry, val);
+			oprofile_add_data64(&entry, ctl);
 			rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
@@ -162,23 +159,17 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			rdmsrl(MSR_AMD64_IBSOPRIP, val);
 			oprofile_write_reserve(&entry, regs, val,
 					       IBS_OP_CODE, IBS_OP_SIZE);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSOPDATA, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSOPDATA2, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSOPDATA3, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSDCLINAD, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSDCPHYSAD, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-- 
cgit v1.2.3


From 802070f5474af1a49435a9528aede47bb18abd47 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 12 Jun 2009 18:32:07 +0200
Subject: x86/oprofile: fix initialization of arch_perfmon for core_i7

Commit:

 e419294 x86/oprofile: moving arch_perfmon counter setup to op_x86_model_spec.init

introduced a bug in the initialization of core_i7 leading to the
incorrect model setup to &op_ppro_spec. This patch fixes this.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 7826dfcc842..28ee490c1b8 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -406,6 +406,7 @@ module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0);
 static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
+	struct op_x86_model_spec const *spec = &op_ppro_spec;	/* default */
 
 	if (force_arch_perfmon && cpu_has_arch_perfmon)
 		return 0;
@@ -432,7 +433,7 @@ static int __init ppro_init(char **cpu_type)
 		*cpu_type = "i386/core_2";
 		break;
 	case 26:
-		model = &op_arch_perfmon_spec;
+		spec = &op_arch_perfmon_spec;
 		*cpu_type = "i386/core_i7";
 		break;
 	case 28:
@@ -443,7 +444,7 @@ static int __init ppro_init(char **cpu_type)
 		return 0;
 	}
 
-	model = &op_ppro_spec;
+	model = spec;
 	return 1;
 }
 
-- 
cgit v1.2.3


From c64b04fe6e0cb7c78e01751a44ef56cf20344e87 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sun, 14 Jun 2009 00:59:50 +0530
Subject: x86, cpu: cpu/proc.c display cache alignment and address sizes for 32
 bit

32 bits can also access x86_cache_alignment, x86_phys_bits and
x86_virt_bits, make them available to user space just as on 64 bits.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1244921390.11733.30.camel@ht.satnam>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/proc.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index d5e30397246..f82706a3901 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -116,11 +116,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
 #endif
 	seq_printf(m, "clflush size\t: %u\n", c->x86_clflush_size);
-#ifdef CONFIG_X86_64
 	seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
 	seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
 		   c->x86_phys_bits, c->x86_virt_bits);
-#endif
 
 	seq_printf(m, "power management:");
 	for (i = 0; i < 32; i++) {
-- 
cgit v1.2.3


From ac5672f82c39ff2f8dce81bf3e68b1dfc41f366f Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 14 Apr 2009 14:29:44 -0700
Subject: x86/paravirt: split paravirt definitions into paravirt_types.h

Split the monolithic asm/paravirt.h into separate paravirt.h (inlines and other
"active" definitions), and paravirt_types.h (types, constants and other "passive"
definitions).  This makes it easier to use the type/constant definitions without
pulling in everything else and causing circular dependency problems.

[ Impact: cleanup ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/paravirt.h       | 711 +--------------------------------
 arch/x86/include/asm/paravirt_types.h | 720 ++++++++++++++++++++++++++++++++++
 2 files changed, 721 insertions(+), 710 deletions(-)
 create mode 100644 arch/x86/include/asm/paravirt_types.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 4fb37c8a083..6a07af432c8 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -7,689 +7,11 @@
 #include <asm/pgtable_types.h>
 #include <asm/asm.h>
 
-/* Bitmask of what can be clobbered: usually at least eax. */
-#define CLBR_NONE 0
-#define CLBR_EAX  (1 << 0)
-#define CLBR_ECX  (1 << 1)
-#define CLBR_EDX  (1 << 2)
-#define CLBR_EDI  (1 << 3)
-
-#ifdef CONFIG_X86_32
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY  ((1 << 4) - 1)
-
-#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
-#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
-#define CLBR_SCRATCH	(0)
-#else
-#define CLBR_RAX  CLBR_EAX
-#define CLBR_RCX  CLBR_ECX
-#define CLBR_RDX  CLBR_EDX
-#define CLBR_RDI  CLBR_EDI
-#define CLBR_RSI  (1 << 4)
-#define CLBR_R8   (1 << 5)
-#define CLBR_R9   (1 << 6)
-#define CLBR_R10  (1 << 7)
-#define CLBR_R11  (1 << 8)
-
-#define CLBR_ANY  ((1 << 9) - 1)
-
-#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
-			 CLBR_RCX | CLBR_R8 | CLBR_R9)
-#define CLBR_RET_REG	(CLBR_RAX)
-#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
-
-#include <asm/desc_defs.h>
-#endif /* X86_64 */
-
-#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+#include <asm/paravirt_types.h>
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #include <linux/cpumask.h>
-#include <asm/kmap_types.h>
-#include <asm/desc_defs.h>
-
-struct page;
-struct thread_struct;
-struct desc_ptr;
-struct tss_struct;
-struct mm_struct;
-struct desc_struct;
-struct task_struct;
-
-/*
- * Wrapper type for pointers to code which uses the non-standard
- * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
- */
-struct paravirt_callee_save {
-	void *func;
-};
-
-/* general info */
-struct pv_info {
-	unsigned int kernel_rpl;
-	int shared_kernel_pmd;
-	int paravirt_enabled;
-	const char *name;
-};
-
-struct pv_init_ops {
-	/*
-	 * Patch may replace one of the defined code sequences with
-	 * arbitrary code, subject to the same register constraints.
-	 * This generally means the code is not free to clobber any
-	 * registers other than EAX.  The patch function should return
-	 * the number of bytes of code generated, as we nop pad the
-	 * rest in generic code.
-	 */
-	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
-			  unsigned long addr, unsigned len);
-
-	/* Basic arch-specific setup */
-	void (*arch_setup)(void);
-	char *(*memory_setup)(void);
-	void (*post_allocator_init)(void);
-
-	/* Print a banner to identify the environment */
-	void (*banner)(void);
-};
-
-
-struct pv_lazy_ops {
-	/* Set deferred update mode, used for batching operations. */
-	void (*enter)(void);
-	void (*leave)(void);
-};
-
-struct pv_time_ops {
-	void (*time_init)(void);
-
-	/* Set and set time of day */
-	unsigned long (*get_wallclock)(void);
-	int (*set_wallclock)(unsigned long);
-
-	unsigned long long (*sched_clock)(void);
-	unsigned long (*get_tsc_khz)(void);
-};
-
-struct pv_cpu_ops {
-	/* hooks for various privileged instructions */
-	unsigned long (*get_debugreg)(int regno);
-	void (*set_debugreg)(int regno, unsigned long value);
-
-	void (*clts)(void);
-
-	unsigned long (*read_cr0)(void);
-	void (*write_cr0)(unsigned long);
-
-	unsigned long (*read_cr4_safe)(void);
-	unsigned long (*read_cr4)(void);
-	void (*write_cr4)(unsigned long);
-
-#ifdef CONFIG_X86_64
-	unsigned long (*read_cr8)(void);
-	void (*write_cr8)(unsigned long);
-#endif
-
-	/* Segment descriptor handling */
-	void (*load_tr_desc)(void);
-	void (*load_gdt)(const struct desc_ptr *);
-	void (*load_idt)(const struct desc_ptr *);
-	void (*store_gdt)(struct desc_ptr *);
-	void (*store_idt)(struct desc_ptr *);
-	void (*set_ldt)(const void *desc, unsigned entries);
-	unsigned long (*store_tr)(void);
-	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
-#ifdef CONFIG_X86_64
-	void (*load_gs_index)(unsigned int idx);
-#endif
-	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
-				const void *desc);
-	void (*write_gdt_entry)(struct desc_struct *,
-				int entrynum, const void *desc, int size);
-	void (*write_idt_entry)(gate_desc *,
-				int entrynum, const gate_desc *gate);
-	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
-	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
-
-	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
-
-	void (*set_iopl_mask)(unsigned mask);
-
-	void (*wbinvd)(void);
-	void (*io_delay)(void);
-
-	/* cpuid emulation, mostly so that caps bits can be disabled */
-	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
-		      unsigned int *ecx, unsigned int *edx);
-
-	/* MSR, PMC and TSR operations.
-	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
-	u64 (*read_msr_amd)(unsigned int msr, int *err);
-	u64 (*read_msr)(unsigned int msr, int *err);
-	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
-
-	u64 (*read_tsc)(void);
-	u64 (*read_pmc)(int counter);
-	unsigned long long (*read_tscp)(unsigned int *aux);
-
-	/*
-	 * Atomically enable interrupts and return to userspace.  This
-	 * is only ever used to return to 32-bit processes; in a
-	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
-	 * never native 64-bit processes.  (Jump, not call.)
-	 */
-	void (*irq_enable_sysexit)(void);
-
-	/*
-	 * Switch to usermode gs and return to 64-bit usermode using
-	 * sysret.  Only used in 64-bit kernels to return to 64-bit
-	 * processes.  Usermode register state, including %rsp, must
-	 * already be restored.
-	 */
-	void (*usergs_sysret64)(void);
-
-	/*
-	 * Switch to usermode gs and return to 32-bit usermode using
-	 * sysret.  Used to return to 32-on-64 compat processes.
-	 * Other usermode register state, including %esp, must already
-	 * be restored.
-	 */
-	void (*usergs_sysret32)(void);
-
-	/* Normal iret.  Jump to this with the standard iret stack
-	   frame set up. */
-	void (*iret)(void);
-
-	void (*swapgs)(void);
-
-	void (*start_context_switch)(struct task_struct *prev);
-	void (*end_context_switch)(struct task_struct *next);
-};
-
-struct pv_irq_ops {
-	void (*init_IRQ)(void);
-
-	/*
-	 * Get/set interrupt state.  save_fl and restore_fl are only
-	 * expected to use X86_EFLAGS_IF; all other bits
-	 * returned from save_fl are undefined, and may be ignored by
-	 * restore_fl.
-	 *
-	 * NOTE: These functions callers expect the callee to preserve
-	 * more registers than the standard C calling convention.
-	 */
-	struct paravirt_callee_save save_fl;
-	struct paravirt_callee_save restore_fl;
-	struct paravirt_callee_save irq_disable;
-	struct paravirt_callee_save irq_enable;
-
-	void (*safe_halt)(void);
-	void (*halt)(void);
-
-#ifdef CONFIG_X86_64
-	void (*adjust_exception_frame)(void);
-#endif
-};
-
-struct pv_apic_ops {
-#ifdef CONFIG_X86_LOCAL_APIC
-	void (*setup_boot_clock)(void);
-	void (*setup_secondary_clock)(void);
-
-	void (*startup_ipi_hook)(int phys_apicid,
-				 unsigned long start_eip,
-				 unsigned long start_esp);
-#endif
-};
-
-struct pv_mmu_ops {
-	/*
-	 * Called before/after init_mm pagetable setup. setup_start
-	 * may reset %cr3, and may pre-install parts of the pagetable;
-	 * pagetable setup is expected to preserve any existing
-	 * mapping.
-	 */
-	void (*pagetable_setup_start)(pgd_t *pgd_base);
-	void (*pagetable_setup_done)(pgd_t *pgd_base);
-
-	unsigned long (*read_cr2)(void);
-	void (*write_cr2)(unsigned long);
-
-	unsigned long (*read_cr3)(void);
-	void (*write_cr3)(unsigned long);
-
-	/*
-	 * Hooks for intercepting the creation/use/destruction of an
-	 * mm_struct.
-	 */
-	void (*activate_mm)(struct mm_struct *prev,
-			    struct mm_struct *next);
-	void (*dup_mmap)(struct mm_struct *oldmm,
-			 struct mm_struct *mm);
-	void (*exit_mmap)(struct mm_struct *mm);
-
-
-	/* TLB operations */
-	void (*flush_tlb_user)(void);
-	void (*flush_tlb_kernel)(void);
-	void (*flush_tlb_single)(unsigned long addr);
-	void (*flush_tlb_others)(const struct cpumask *cpus,
-				 struct mm_struct *mm,
-				 unsigned long va);
-
-	/* Hooks for allocating and freeing a pagetable top-level */
-	int  (*pgd_alloc)(struct mm_struct *mm);
-	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
-
-	/*
-	 * Hooks for allocating/releasing pagetable pages when they're
-	 * attached to a pagetable
-	 */
-	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
-	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
-	void (*release_pte)(unsigned long pfn);
-	void (*release_pmd)(unsigned long pfn);
-	void (*release_pud)(unsigned long pfn);
-
-	/* Pagetable manipulation functions */
-	void (*set_pte)(pte_t *ptep, pte_t pteval);
-	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep, pte_t pteval);
-	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
-	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep);
-	void (*pte_update_defer)(struct mm_struct *mm,
-				 unsigned long addr, pte_t *ptep);
-
-	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep);
-	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep, pte_t pte);
-
-	struct paravirt_callee_save pte_val;
-	struct paravirt_callee_save make_pte;
-
-	struct paravirt_callee_save pgd_val;
-	struct paravirt_callee_save make_pgd;
-
-#if PAGETABLE_LEVELS >= 3
-#ifdef CONFIG_X86_PAE
-	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
-	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
-			  pte_t *ptep);
-	void (*pmd_clear)(pmd_t *pmdp);
-
-#endif	/* CONFIG_X86_PAE */
-
-	void (*set_pud)(pud_t *pudp, pud_t pudval);
-
-	struct paravirt_callee_save pmd_val;
-	struct paravirt_callee_save make_pmd;
-
-#if PAGETABLE_LEVELS == 4
-	struct paravirt_callee_save pud_val;
-	struct paravirt_callee_save make_pud;
-
-	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
-#endif	/* PAGETABLE_LEVELS == 4 */
-#endif	/* PAGETABLE_LEVELS >= 3 */
-
-#ifdef CONFIG_HIGHPTE
-	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
-#endif
-
-	struct pv_lazy_ops lazy_mode;
-
-	/* dom0 ops */
-
-	/* Sometimes the physical address is a pfn, and sometimes its
-	   an mfn.  We can tell which is which from the index. */
-	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
-			   phys_addr_t phys, pgprot_t flags);
-};
-
-struct raw_spinlock;
-struct pv_lock_ops {
-	int (*spin_is_locked)(struct raw_spinlock *lock);
-	int (*spin_is_contended)(struct raw_spinlock *lock);
-	void (*spin_lock)(struct raw_spinlock *lock);
-	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
-	int (*spin_trylock)(struct raw_spinlock *lock);
-	void (*spin_unlock)(struct raw_spinlock *lock);
-};
-
-/* This contains all the paravirt structures: we get a convenient
- * number for each function using the offset which we use to indicate
- * what to patch. */
-struct paravirt_patch_template {
-	struct pv_init_ops pv_init_ops;
-	struct pv_time_ops pv_time_ops;
-	struct pv_cpu_ops pv_cpu_ops;
-	struct pv_irq_ops pv_irq_ops;
-	struct pv_apic_ops pv_apic_ops;
-	struct pv_mmu_ops pv_mmu_ops;
-	struct pv_lock_ops pv_lock_ops;
-};
-
-extern struct pv_info pv_info;
-extern struct pv_init_ops pv_init_ops;
-extern struct pv_time_ops pv_time_ops;
-extern struct pv_cpu_ops pv_cpu_ops;
-extern struct pv_irq_ops pv_irq_ops;
-extern struct pv_apic_ops pv_apic_ops;
-extern struct pv_mmu_ops pv_mmu_ops;
-extern struct pv_lock_ops pv_lock_ops;
-
-#define PARAVIRT_PATCH(x)					\
-	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
-
-#define paravirt_type(op)				\
-	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
-	[paravirt_opptr] "i" (&(op))
-#define paravirt_clobber(clobber)		\
-	[paravirt_clobber] "i" (clobber)
-
-/*
- * Generate some code, and mark it as patchable by the
- * apply_paravirt() alternate instruction patcher.
- */
-#define _paravirt_alt(insn_string, type, clobber)	\
-	"771:\n\t" insn_string "\n" "772:\n"		\
-	".pushsection .parainstructions,\"a\"\n"	\
-	_ASM_ALIGN "\n"					\
-	_ASM_PTR " 771b\n"				\
-	"  .byte " type "\n"				\
-	"  .byte 772b-771b\n"				\
-	"  .short " clobber "\n"			\
-	".popsection\n"
-
-/* Generate patchable code, with the default asm parameters. */
-#define paravirt_alt(insn_string)					\
-	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
-
-/* Simple instruction patching code. */
-#define DEF_NATIVE(ops, name, code) 					\
-	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
-	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
-
-unsigned paravirt_patch_nop(void);
-unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ignore(unsigned len);
-unsigned paravirt_patch_call(void *insnbuf,
-			     const void *target, u16 tgt_clobbers,
-			     unsigned long addr, u16 site_clobbers,
-			     unsigned len);
-unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
-			    unsigned long addr, unsigned len);
-unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
-				unsigned long addr, unsigned len);
-
-unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
-			      const char *start, const char *end);
-
-unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
-		      unsigned long addr, unsigned len);
-
-int paravirt_disable_iospace(void);
-
-/*
- * This generates an indirect call based on the operation type number.
- * The type number, computed in PARAVIRT_PATCH, is derived from the
- * offset into the paravirt_patch_template structure, and can therefore be
- * freely converted back into a structure offset.
- */
-#define PARAVIRT_CALL	"call *%c[paravirt_opptr];"
-
-/*
- * These macros are intended to wrap calls through one of the paravirt
- * ops structs, so that they can be later identified and patched at
- * runtime.
- *
- * Normally, a call to a pv_op function is a simple indirect call:
- * (pv_op_struct.operations)(args...).
- *
- * Unfortunately, this is a relatively slow operation for modern CPUs,
- * because it cannot necessarily determine what the destination
- * address is.  In this case, the address is a runtime constant, so at
- * the very least we can patch the call to e a simple direct call, or
- * ideally, patch an inline implementation into the callsite.  (Direct
- * calls are essentially free, because the call and return addresses
- * are completely predictable.)
- *
- * For i386, these macros rely on the standard gcc "regparm(3)" calling
- * convention, in which the first three arguments are placed in %eax,
- * %edx, %ecx (in that order), and the remaining arguments are placed
- * on the stack.  All caller-save registers (eax,edx,ecx) are expected
- * to be modified (either clobbered or used for return values).
- * X86_64, on the other hand, already specifies a register-based calling
- * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
- * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
- * special handling for dealing with 4 arguments, unlike i386.
- * However, x86_64 also have to clobber all caller saved registers, which
- * unfortunately, are quite a bit (r8 - r11)
- *
- * The call instruction itself is marked by placing its start address
- * and size into the .parainstructions section, so that
- * apply_paravirt() in arch/i386/kernel/alternative.c can do the
- * appropriate patching under the control of the backend pv_init_ops
- * implementation.
- *
- * Unfortunately there's no way to get gcc to generate the args setup
- * for the call, and then allow the call itself to be generated by an
- * inline asm.  Because of this, we must do the complete arg setup and
- * return value handling from within these macros.  This is fairly
- * cumbersome.
- *
- * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
- * It could be extended to more arguments, but there would be little
- * to be gained from that.  For each number of arguments, there are
- * the two VCALL and CALL variants for void and non-void functions.
- *
- * When there is a return value, the invoker of the macro must specify
- * the return type.  The macro then uses sizeof() on that type to
- * determine whether its a 32 or 64 bit value, and places the return
- * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
- * 64-bit). For x86_64 machines, it just returns at %rax regardless of
- * the return value size.
- *
- * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
- * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
- * in low,high order
- *
- * Small structures are passed and returned in registers.  The macro
- * calling convention can't directly deal with this, so the wrapper
- * functions must do this.
- *
- * These PVOP_* macros are only defined within this header.  This
- * means that all uses must be wrapped in inline functions.  This also
- * makes sure the incoming and outgoing types are always correct.
- */
-#ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS				\
-	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
-
-#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
-					"=c" (__ecx)
-#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
-
-#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
-#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS
-#define VEXTRA_CLOBBERS
-#else  /* CONFIG_X86_64 */
-#define PVOP_VCALL_ARGS					\
-	unsigned long __edi = __edi, __esi = __esi,	\
-		__edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
-
-#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
-#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
-				"=S" (__esi), "=d" (__edx),		\
-				"=c" (__ecx)
-#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
-
-#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
-#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
-#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
-#endif	/* CONFIG_X86_32 */
-
-#ifdef CONFIG_PARAVIRT_DEBUG
-#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
-#else
-#define PVOP_TEST_NULL(op)	((void)op)
-#endif
-
-#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
-		      pre, post, ...)					\
-	({								\
-		rettype __ret;						\
-		PVOP_CALL_ARGS;						\
-		PVOP_TEST_NULL(op);					\
-		/* This is 32-bit specific, but is okay in 64-bit */	\
-		/* since this condition will never hold */		\
-		if (sizeof(rettype) > sizeof(unsigned long)) {		\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : call_clbr			\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(clbr),		\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" extra_clbr);	\
-			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
-		} else {						\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : call_clbr			\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(clbr),		\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" extra_clbr);	\
-			__ret = (rettype)__eax;				\
-		}							\
-		__ret;							\
-	})
-
-#define __PVOP_CALL(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
-		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
-
-#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
-		      PVOP_CALLEE_CLOBBERS, ,				\
-		      pre, post, ##__VA_ARGS__)
-
-
-#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
-	({								\
-		PVOP_VCALL_ARGS;					\
-		PVOP_TEST_NULL(op);					\
-		asm volatile(pre					\
-			     paravirt_alt(PARAVIRT_CALL)		\
-			     post					\
-			     : call_clbr				\
-			     : paravirt_type(op),			\
-			       paravirt_clobber(clbr),			\
-			       ##__VA_ARGS__				\
-			     : "memory", "cc" extra_clbr);		\
-	})
-
-#define __PVOP_VCALL(op, pre, post, ...)				\
-	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
-		       VEXTRA_CLOBBERS,					\
-		       pre, post, ##__VA_ARGS__)
-
-#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
-		      PVOP_VCALLEE_CLOBBERS, ,				\
-		      pre, post, ##__VA_ARGS__)
-
-
-
-#define PVOP_CALL0(rettype, op)						\
-	__PVOP_CALL(rettype, op, "", "")
-#define PVOP_VCALL0(op)							\
-	__PVOP_VCALL(op, "", "")
-
-#define PVOP_CALLEE0(rettype, op)					\
-	__PVOP_CALLEESAVE(rettype, op, "", "")
-#define PVOP_VCALLEE0(op)						\
-	__PVOP_VCALLEESAVE(op, "", "")
-
-
-#define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
-
-#define PVOP_CALLEE1(rettype, op, arg1)					\
-	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALLEE1(op, arg1)						\
-	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
-
-
-#define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
-		    PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
-		     PVOP_CALL_ARG2(arg2))
-
-#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
-	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
-			  PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALLEE2(op, arg1, arg2)					\
-	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
-			   PVOP_CALL_ARG2(arg2))
-
-
-#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
-		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
-		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-
-/* This is the only difference in x86_64. We can make it much simpler */
-#ifdef CONFIG_X86_32
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op,					\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
-		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op,						\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
-#else
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op, "", "",				\
-		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
-		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op, "", "",					\
-		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
-		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#endif
 
 static inline int paravirt_enabled(void)
 {
@@ -1393,20 +715,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 }
 #endif	/* CONFIG_X86_PAE */
 
-/* Lazy mode for batching updates / context switch */
-enum paravirt_lazy_mode {
-	PARAVIRT_LAZY_NONE,
-	PARAVIRT_LAZY_MMU,
-	PARAVIRT_LAZY_CPU,
-};
-
-enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
-void paravirt_start_context_switch(struct task_struct *prev);
-void paravirt_end_context_switch(struct task_struct *next);
-
-void paravirt_enter_lazy_mmu(void);
-void paravirt_leave_lazy_mmu(void);
-
 #define  __HAVE_ARCH_START_CONTEXT_SWITCH
 static inline void arch_start_context_switch(struct task_struct *prev)
 {
@@ -1437,12 +745,6 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 	pv_mmu_ops.set_fixmap(idx, phys, flags);
 }
 
-void _paravirt_nop(void);
-u32 _paravirt_ident_32(u32);
-u64 _paravirt_ident_64(u64);
-
-#define paravirt_nop	((void *)_paravirt_nop)
-
 #if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
 static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
@@ -1479,17 +781,6 @@ static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
 
 #endif
 
-/* These all sit in the .parainstructions section to tell us what to patch. */
-struct paravirt_patch_site {
-	u8 *instr; 		/* original instructions */
-	u8 instrtype;		/* type of this instruction */
-	u8 len;			/* length of original instruction */
-	u16 clobbers;		/* what registers you may clobber */
-};
-
-extern struct paravirt_patch_site __parainstructions[],
-	__parainstructions_end[];
-
 #ifdef CONFIG_X86_32
 #define PV_SAVE_REGS "pushl %ecx; pushl %edx;"
 #define PV_RESTORE_REGS "popl %edx; popl %ecx;"
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
new file mode 100644
index 00000000000..2b3371bae29
--- /dev/null
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -0,0 +1,720 @@
+#ifndef _ASM_X86_PARAVIRT_TYPES_H
+#define _ASM_X86_PARAVIRT_TYPES_H
+
+/* Bitmask of what can be clobbered: usually at least eax. */
+#define CLBR_NONE 0
+#define CLBR_EAX  (1 << 0)
+#define CLBR_ECX  (1 << 1)
+#define CLBR_EDX  (1 << 2)
+#define CLBR_EDI  (1 << 3)
+
+#ifdef CONFIG_X86_32
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 4) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
+#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
+#define CLBR_SCRATCH	(0)
+#else
+#define CLBR_RAX  CLBR_EAX
+#define CLBR_RCX  CLBR_ECX
+#define CLBR_RDX  CLBR_EDX
+#define CLBR_RDI  CLBR_EDI
+#define CLBR_RSI  (1 << 4)
+#define CLBR_R8   (1 << 5)
+#define CLBR_R9   (1 << 6)
+#define CLBR_R10  (1 << 7)
+#define CLBR_R11  (1 << 8)
+
+#define CLBR_ANY  ((1 << 9) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
+			 CLBR_RCX | CLBR_R8 | CLBR_R9)
+#define CLBR_RET_REG	(CLBR_RAX)
+#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
+
+#endif /* X86_64 */
+
+#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/desc_defs.h>
+#include <asm/kmap_types.h>
+
+struct page;
+struct thread_struct;
+struct desc_ptr;
+struct tss_struct;
+struct mm_struct;
+struct desc_struct;
+struct task_struct;
+struct cpumask;
+
+/*
+ * Wrapper type for pointers to code which uses the non-standard
+ * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
+ */
+struct paravirt_callee_save {
+	void *func;
+};
+
+/* general info */
+struct pv_info {
+	unsigned int kernel_rpl;
+	int shared_kernel_pmd;
+	int paravirt_enabled;
+	const char *name;
+};
+
+struct pv_init_ops {
+	/*
+	 * Patch may replace one of the defined code sequences with
+	 * arbitrary code, subject to the same register constraints.
+	 * This generally means the code is not free to clobber any
+	 * registers other than EAX.  The patch function should return
+	 * the number of bytes of code generated, as we nop pad the
+	 * rest in generic code.
+	 */
+	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
+			  unsigned long addr, unsigned len);
+
+	/* Basic arch-specific setup */
+	void (*arch_setup)(void);
+	char *(*memory_setup)(void);
+	void (*post_allocator_init)(void);
+
+	/* Print a banner to identify the environment */
+	void (*banner)(void);
+};
+
+
+struct pv_lazy_ops {
+	/* Set deferred update mode, used for batching operations. */
+	void (*enter)(void);
+	void (*leave)(void);
+};
+
+struct pv_time_ops {
+	void (*time_init)(void);
+
+	/* Set and set time of day */
+	unsigned long (*get_wallclock)(void);
+	int (*set_wallclock)(unsigned long);
+
+	unsigned long long (*sched_clock)(void);
+	unsigned long (*get_tsc_khz)(void);
+};
+
+struct pv_cpu_ops {
+	/* hooks for various privileged instructions */
+	unsigned long (*get_debugreg)(int regno);
+	void (*set_debugreg)(int regno, unsigned long value);
+
+	void (*clts)(void);
+
+	unsigned long (*read_cr0)(void);
+	void (*write_cr0)(unsigned long);
+
+	unsigned long (*read_cr4_safe)(void);
+	unsigned long (*read_cr4)(void);
+	void (*write_cr4)(unsigned long);
+
+#ifdef CONFIG_X86_64
+	unsigned long (*read_cr8)(void);
+	void (*write_cr8)(unsigned long);
+#endif
+
+	/* Segment descriptor handling */
+	void (*load_tr_desc)(void);
+	void (*load_gdt)(const struct desc_ptr *);
+	void (*load_idt)(const struct desc_ptr *);
+	void (*store_gdt)(struct desc_ptr *);
+	void (*store_idt)(struct desc_ptr *);
+	void (*set_ldt)(const void *desc, unsigned entries);
+	unsigned long (*store_tr)(void);
+	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
+#ifdef CONFIG_X86_64
+	void (*load_gs_index)(unsigned int idx);
+#endif
+	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
+				const void *desc);
+	void (*write_gdt_entry)(struct desc_struct *,
+				int entrynum, const void *desc, int size);
+	void (*write_idt_entry)(gate_desc *,
+				int entrynum, const gate_desc *gate);
+	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
+	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
+
+	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
+
+	void (*set_iopl_mask)(unsigned mask);
+
+	void (*wbinvd)(void);
+	void (*io_delay)(void);
+
+	/* cpuid emulation, mostly so that caps bits can be disabled */
+	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
+		      unsigned int *ecx, unsigned int *edx);
+
+	/* MSR, PMC and TSR operations.
+	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
+	u64 (*read_msr_amd)(unsigned int msr, int *err);
+	u64 (*read_msr)(unsigned int msr, int *err);
+	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
+
+	u64 (*read_tsc)(void);
+	u64 (*read_pmc)(int counter);
+	unsigned long long (*read_tscp)(unsigned int *aux);
+
+	/*
+	 * Atomically enable interrupts and return to userspace.  This
+	 * is only ever used to return to 32-bit processes; in a
+	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
+	 * never native 64-bit processes.  (Jump, not call.)
+	 */
+	void (*irq_enable_sysexit)(void);
+
+	/*
+	 * Switch to usermode gs and return to 64-bit usermode using
+	 * sysret.  Only used in 64-bit kernels to return to 64-bit
+	 * processes.  Usermode register state, including %rsp, must
+	 * already be restored.
+	 */
+	void (*usergs_sysret64)(void);
+
+	/*
+	 * Switch to usermode gs and return to 32-bit usermode using
+	 * sysret.  Used to return to 32-on-64 compat processes.
+	 * Other usermode register state, including %esp, must already
+	 * be restored.
+	 */
+	void (*usergs_sysret32)(void);
+
+	/* Normal iret.  Jump to this with the standard iret stack
+	   frame set up. */
+	void (*iret)(void);
+
+	void (*swapgs)(void);
+
+	void (*start_context_switch)(struct task_struct *prev);
+	void (*end_context_switch)(struct task_struct *next);
+};
+
+struct pv_irq_ops {
+	void (*init_IRQ)(void);
+
+	/*
+	 * Get/set interrupt state.  save_fl and restore_fl are only
+	 * expected to use X86_EFLAGS_IF; all other bits
+	 * returned from save_fl are undefined, and may be ignored by
+	 * restore_fl.
+	 *
+	 * NOTE: These functions callers expect the callee to preserve
+	 * more registers than the standard C calling convention.
+	 */
+	struct paravirt_callee_save save_fl;
+	struct paravirt_callee_save restore_fl;
+	struct paravirt_callee_save irq_disable;
+	struct paravirt_callee_save irq_enable;
+
+	void (*safe_halt)(void);
+	void (*halt)(void);
+
+#ifdef CONFIG_X86_64
+	void (*adjust_exception_frame)(void);
+#endif
+};
+
+struct pv_apic_ops {
+#ifdef CONFIG_X86_LOCAL_APIC
+	void (*setup_boot_clock)(void);
+	void (*setup_secondary_clock)(void);
+
+	void (*startup_ipi_hook)(int phys_apicid,
+				 unsigned long start_eip,
+				 unsigned long start_esp);
+#endif
+};
+
+struct pv_mmu_ops {
+	/*
+	 * Called before/after init_mm pagetable setup. setup_start
+	 * may reset %cr3, and may pre-install parts of the pagetable;
+	 * pagetable setup is expected to preserve any existing
+	 * mapping.
+	 */
+	void (*pagetable_setup_start)(pgd_t *pgd_base);
+	void (*pagetable_setup_done)(pgd_t *pgd_base);
+
+	unsigned long (*read_cr2)(void);
+	void (*write_cr2)(unsigned long);
+
+	unsigned long (*read_cr3)(void);
+	void (*write_cr3)(unsigned long);
+
+	/*
+	 * Hooks for intercepting the creation/use/destruction of an
+	 * mm_struct.
+	 */
+	void (*activate_mm)(struct mm_struct *prev,
+			    struct mm_struct *next);
+	void (*dup_mmap)(struct mm_struct *oldmm,
+			 struct mm_struct *mm);
+	void (*exit_mmap)(struct mm_struct *mm);
+
+
+	/* TLB operations */
+	void (*flush_tlb_user)(void);
+	void (*flush_tlb_kernel)(void);
+	void (*flush_tlb_single)(unsigned long addr);
+	void (*flush_tlb_others)(const struct cpumask *cpus,
+				 struct mm_struct *mm,
+				 unsigned long va);
+
+	/* Hooks for allocating and freeing a pagetable top-level */
+	int  (*pgd_alloc)(struct mm_struct *mm);
+	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
+
+	/*
+	 * Hooks for allocating/releasing pagetable pages when they're
+	 * attached to a pagetable
+	 */
+	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
+	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
+	void (*release_pte)(unsigned long pfn);
+	void (*release_pmd)(unsigned long pfn);
+	void (*release_pud)(unsigned long pfn);
+
+	/* Pagetable manipulation functions */
+	void (*set_pte)(pte_t *ptep, pte_t pteval);
+	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep, pte_t pteval);
+	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
+	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep);
+	void (*pte_update_defer)(struct mm_struct *mm,
+				 unsigned long addr, pte_t *ptep);
+
+	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep);
+	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep, pte_t pte);
+
+	struct paravirt_callee_save pte_val;
+	struct paravirt_callee_save make_pte;
+
+	struct paravirt_callee_save pgd_val;
+	struct paravirt_callee_save make_pgd;
+
+#if PAGETABLE_LEVELS >= 3
+#ifdef CONFIG_X86_PAE
+	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
+	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
+			  pte_t *ptep);
+	void (*pmd_clear)(pmd_t *pmdp);
+
+#endif	/* CONFIG_X86_PAE */
+
+	void (*set_pud)(pud_t *pudp, pud_t pudval);
+
+	struct paravirt_callee_save pmd_val;
+	struct paravirt_callee_save make_pmd;
+
+#if PAGETABLE_LEVELS == 4
+	struct paravirt_callee_save pud_val;
+	struct paravirt_callee_save make_pud;
+
+	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
+#endif	/* PAGETABLE_LEVELS == 4 */
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+#ifdef CONFIG_HIGHPTE
+	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
+#endif
+
+	struct pv_lazy_ops lazy_mode;
+
+	/* dom0 ops */
+
+	/* Sometimes the physical address is a pfn, and sometimes its
+	   an mfn.  We can tell which is which from the index. */
+	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
+			   phys_addr_t phys, pgprot_t flags);
+};
+
+struct raw_spinlock;
+struct pv_lock_ops {
+	int (*spin_is_locked)(struct raw_spinlock *lock);
+	int (*spin_is_contended)(struct raw_spinlock *lock);
+	void (*spin_lock)(struct raw_spinlock *lock);
+	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
+	int (*spin_trylock)(struct raw_spinlock *lock);
+	void (*spin_unlock)(struct raw_spinlock *lock);
+};
+
+/* This contains all the paravirt structures: we get a convenient
+ * number for each function using the offset which we use to indicate
+ * what to patch. */
+struct paravirt_patch_template {
+	struct pv_init_ops pv_init_ops;
+	struct pv_time_ops pv_time_ops;
+	struct pv_cpu_ops pv_cpu_ops;
+	struct pv_irq_ops pv_irq_ops;
+	struct pv_apic_ops pv_apic_ops;
+	struct pv_mmu_ops pv_mmu_ops;
+	struct pv_lock_ops pv_lock_ops;
+};
+
+extern struct pv_info pv_info;
+extern struct pv_init_ops pv_init_ops;
+extern struct pv_time_ops pv_time_ops;
+extern struct pv_cpu_ops pv_cpu_ops;
+extern struct pv_irq_ops pv_irq_ops;
+extern struct pv_apic_ops pv_apic_ops;
+extern struct pv_mmu_ops pv_mmu_ops;
+extern struct pv_lock_ops pv_lock_ops;
+
+#define PARAVIRT_PATCH(x)					\
+	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
+
+#define paravirt_type(op)				\
+	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
+	[paravirt_opptr] "i" (&(op))
+#define paravirt_clobber(clobber)		\
+	[paravirt_clobber] "i" (clobber)
+
+/*
+ * Generate some code, and mark it as patchable by the
+ * apply_paravirt() alternate instruction patcher.
+ */
+#define _paravirt_alt(insn_string, type, clobber)	\
+	"771:\n\t" insn_string "\n" "772:\n"		\
+	".pushsection .parainstructions,\"a\"\n"	\
+	_ASM_ALIGN "\n"					\
+	_ASM_PTR " 771b\n"				\
+	"  .byte " type "\n"				\
+	"  .byte 772b-771b\n"				\
+	"  .short " clobber "\n"			\
+	".popsection\n"
+
+/* Generate patchable code, with the default asm parameters. */
+#define paravirt_alt(insn_string)					\
+	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
+
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code) 					\
+	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
+unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ignore(unsigned len);
+unsigned paravirt_patch_call(void *insnbuf,
+			     const void *target, u16 tgt_clobbers,
+			     unsigned long addr, u16 site_clobbers,
+			     unsigned len);
+unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
+			    unsigned long addr, unsigned len);
+unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
+				unsigned long addr, unsigned len);
+
+unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
+			      const char *start, const char *end);
+
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len);
+
+int paravirt_disable_iospace(void);
+
+/*
+ * This generates an indirect call based on the operation type number.
+ * The type number, computed in PARAVIRT_PATCH, is derived from the
+ * offset into the paravirt_patch_template structure, and can therefore be
+ * freely converted back into a structure offset.
+ */
+#define PARAVIRT_CALL	"call *%c[paravirt_opptr];"
+
+/*
+ * These macros are intended to wrap calls through one of the paravirt
+ * ops structs, so that they can be later identified and patched at
+ * runtime.
+ *
+ * Normally, a call to a pv_op function is a simple indirect call:
+ * (pv_op_struct.operations)(args...).
+ *
+ * Unfortunately, this is a relatively slow operation for modern CPUs,
+ * because it cannot necessarily determine what the destination
+ * address is.  In this case, the address is a runtime constant, so at
+ * the very least we can patch the call to e a simple direct call, or
+ * ideally, patch an inline implementation into the callsite.  (Direct
+ * calls are essentially free, because the call and return addresses
+ * are completely predictable.)
+ *
+ * For i386, these macros rely on the standard gcc "regparm(3)" calling
+ * convention, in which the first three arguments are placed in %eax,
+ * %edx, %ecx (in that order), and the remaining arguments are placed
+ * on the stack.  All caller-save registers (eax,edx,ecx) are expected
+ * to be modified (either clobbered or used for return values).
+ * X86_64, on the other hand, already specifies a register-based calling
+ * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
+ * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
+ * special handling for dealing with 4 arguments, unlike i386.
+ * However, x86_64 also have to clobber all caller saved registers, which
+ * unfortunately, are quite a bit (r8 - r11)
+ *
+ * The call instruction itself is marked by placing its start address
+ * and size into the .parainstructions section, so that
+ * apply_paravirt() in arch/i386/kernel/alternative.c can do the
+ * appropriate patching under the control of the backend pv_init_ops
+ * implementation.
+ *
+ * Unfortunately there's no way to get gcc to generate the args setup
+ * for the call, and then allow the call itself to be generated by an
+ * inline asm.  Because of this, we must do the complete arg setup and
+ * return value handling from within these macros.  This is fairly
+ * cumbersome.
+ *
+ * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
+ * It could be extended to more arguments, but there would be little
+ * to be gained from that.  For each number of arguments, there are
+ * the two VCALL and CALL variants for void and non-void functions.
+ *
+ * When there is a return value, the invoker of the macro must specify
+ * the return type.  The macro then uses sizeof() on that type to
+ * determine whether its a 32 or 64 bit value, and places the return
+ * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
+ * 64-bit). For x86_64 machines, it just returns at %rax regardless of
+ * the return value size.
+ *
+ * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
+ * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
+ * in low,high order
+ *
+ * Small structures are passed and returned in registers.  The macro
+ * calling convention can't directly deal with this, so the wrapper
+ * functions must do this.
+ *
+ * These PVOP_* macros are only defined within this header.  This
+ * means that all uses must be wrapped in inline functions.  This also
+ * makes sure the incoming and outgoing types are always correct.
+ */
+#ifdef CONFIG_X86_32
+#define PVOP_VCALL_ARGS				\
+	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
+#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+
+#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
+
+#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
+					"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+
+#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
+#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
+
+#define EXTRA_CLOBBERS
+#define VEXTRA_CLOBBERS
+#else  /* CONFIG_X86_64 */
+#define PVOP_VCALL_ARGS					\
+	unsigned long __edi = __edi, __esi = __esi,	\
+		__edx = __edx, __ecx = __ecx
+#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+
+#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
+
+#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
+				"=S" (__esi), "=d" (__edx),		\
+				"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
+
+#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
+
+#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
+#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
+#endif	/* CONFIG_X86_32 */
+
+#ifdef CONFIG_PARAVIRT_DEBUG
+#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
+#else
+#define PVOP_TEST_NULL(op)	((void)op)
+#endif
+
+#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
+		      pre, post, ...)					\
+	({								\
+		rettype __ret;						\
+		PVOP_CALL_ARGS;						\
+		PVOP_TEST_NULL(op);					\
+		/* This is 32-bit specific, but is okay in 64-bit */	\
+		/* since this condition will never hold */		\
+		if (sizeof(rettype) > sizeof(unsigned long)) {		\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : call_clbr			\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(clbr),		\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" extra_clbr);	\
+			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
+		} else {						\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : call_clbr			\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(clbr),		\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" extra_clbr);	\
+			__ret = (rettype)__eax;				\
+		}							\
+		__ret;							\
+	})
+
+#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
+		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
+
+#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_CALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
+	({								\
+		PVOP_VCALL_ARGS;					\
+		PVOP_TEST_NULL(op);					\
+		asm volatile(pre					\
+			     paravirt_alt(PARAVIRT_CALL)		\
+			     post					\
+			     : call_clbr				\
+			     : paravirt_type(op),			\
+			       paravirt_clobber(clbr),			\
+			       ##__VA_ARGS__				\
+			     : "memory", "cc" extra_clbr);		\
+	})
+
+#define __PVOP_VCALL(op, pre, post, ...)				\
+	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
+		       VEXTRA_CLOBBERS,					\
+		       pre, post, ##__VA_ARGS__)
+
+#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_VCALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+
+#define PVOP_CALL0(rettype, op)						\
+	__PVOP_CALL(rettype, op, "", "")
+#define PVOP_VCALL0(op)							\
+	__PVOP_VCALL(op, "", "")
+
+#define PVOP_CALLEE0(rettype, op)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "")
+#define PVOP_VCALLEE0(op)						\
+	__PVOP_VCALLEESAVE(op, "", "")
+
+
+#define PVOP_CALL1(rettype, op, arg1)					\
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALL1(op, arg1)						\
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
+
+#define PVOP_CALLEE1(rettype, op, arg1)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALLEE1(op, arg1)						\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
+
+
+#define PVOP_CALL2(rettype, op, arg1, arg2)				\
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALL2(op, arg1, arg2)					\
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2))
+
+#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
+			  PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALLEE2(op, arg1, arg2)					\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
+			   PVOP_CALL_ARG2(arg2))
+
+
+#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
+#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
+
+/* This is the only difference in x86_64. We can make it much simpler */
+#ifdef CONFIG_X86_32
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op,					\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op,						\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
+		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#else
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op, "", "",				\
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op, "", "",					\
+		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
+		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
+#endif
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+	PARAVIRT_LAZY_NONE,
+	PARAVIRT_LAZY_MMU,
+	PARAVIRT_LAZY_CPU,
+};
+
+enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
+void paravirt_start_context_switch(struct task_struct *prev);
+void paravirt_end_context_switch(struct task_struct *next);
+
+void paravirt_enter_lazy_mmu(void);
+void paravirt_leave_lazy_mmu(void);
+
+void _paravirt_nop(void);
+u32 _paravirt_ident_32(u32);
+u64 _paravirt_ident_64(u64);
+
+#define paravirt_nop	((void *)_paravirt_nop)
+
+/* These all sit in the .parainstructions section to tell us what to patch. */
+struct paravirt_patch_site {
+	u8 *instr; 		/* original instructions */
+	u8 instrtype;		/* type of this instruction */
+	u8 len;			/* length of original instruction */
+	u16 clobbers;		/* what registers you may clobber */
+};
+
+extern struct paravirt_patch_site __parainstructions[],
+	__parainstructions_end[];
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_X86_PARAVIRT_TYPES_H */
-- 
cgit v1.2.3


From e6e9cac8c3417b43498b243c1f8f11780e157168 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 00:40:59 -0700
Subject: x86: split out core __math_state_restore

Split the core fpu state restoration out into __math_state_restore, which
assumes that cr0.TS is clear and that the fpu context has been initialized.

This will be used during context switch.  There are two reasons this is
desireable:

- There's a small clarification.  When __switch_to() calls math_state_restore,
  it relies on the fact that tsk_used_math() returns true, and so will
  never do a blocking init_fpu().  __math_state_restore() does not have
  (or need) that logic, so the question never arises.

- It allows the clts() to be moved earler in __switch_to() so it can be performed
  while cpu context updates are batched (will be done in a later patch).

[ Impact: refactor code to make reuse cleaner; no functional change ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/include/asm/i387.h |  1 +
 arch/x86/kernel/traps.c     | 33 +++++++++++++++++++++++----------
 2 files changed, 24 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 175adf58dd4..2e7529295f5 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -26,6 +26,7 @@ extern void fpu_init(void);
 extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
 extern asmlinkage void math_state_restore(void);
+extern void __math_state_restore(void);
 extern void init_thread_xstate(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5f935f0d586..71b91669ad1 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -813,6 +813,28 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
 {
 }
 
+/*
+ * __math_state_restore assumes that cr0.TS is already clear and the
+ * fpu state is all ready for use.  Used during context switch.
+ */
+void __math_state_restore(void)
+{
+	struct thread_info *thread = current_thread_info();
+	struct task_struct *tsk = thread->task;
+
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(tsk))) {
+		stts();
+		force_sig(SIGSEGV, tsk);
+		return;
+	}
+
+	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
+	tsk->fpu_counter++;
+}
+
 /*
  * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
@@ -844,17 +866,8 @@ asmlinkage void math_state_restore(void)
 	}
 
 	clts();				/* Allow maths ops (or we recurse) */
-	/*
-	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
-	 */
-	if (unlikely(restore_fpu_checking(tsk))) {
-		stts();
-		force_sig(SIGSEGV, tsk);
-		return;
-	}
 
-	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
-	tsk->fpu_counter++;
+	__math_state_restore();
 }
 EXPORT_SYMBOL_GPL(math_state_restore);
 
-- 
cgit v1.2.3


From 2fcddce10f6771cfa0c56fd1e826d50d67d100b7 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 00:45:26 -0700
Subject: x86-32: make sure clts is batched during context switch

If we're preloading the fpu state during context switch, make sure the clts
happens while we're batching the cpu context update, then do the actual
__math_state_restore once the updates are flushed.

This allows more efficient context switches when running paravirtualized,
as all the hypercalls can be folded together into one.

[ Impact: optimise paravirtual FPU context switch ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/kernel/process_32.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 59f4524984a..a80eddd4165 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -350,14 +350,21 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 				 *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
+	bool preload_fpu;
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	__unlazy_fpu(prev_p);
+	/*
+	 * If the task has used fpu the last 5 timeslices, just do a full
+	 * restore of the math state immediately to avoid the trap; the
+	 * chances of needing FPU soon are obviously high now
+	 */
+	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
 
+	__unlazy_fpu(prev_p);
 
 	/* we're going to use this soon, after a few expensive things */
-	if (next_p->fpu_counter > 5)
+	if (preload_fpu)
 		prefetch(next->xstate);
 
 	/*
@@ -398,6 +405,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
 		__switch_to_xtra(prev_p, next_p, tss);
 
+	/* If we're going to preload the fpu context, make sure clts
+	   is run while we're batching the cpu state updates. */
+	if (preload_fpu)
+		clts();
+
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -407,15 +419,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	arch_end_context_switch(next_p);
 
-	/* If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 *
-	 * tsk_used_math() checks prevent calling math_state_restore(),
-	 * which can sleep in the case of !tsk_used_math()
-	 */
-	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
-		math_state_restore();
+	if (preload_fpu)
+		__math_state_restore();
 
 	/*
 	 * Restore %gs if needed (which is common)
-- 
cgit v1.2.3


From 16d9dbf0c2bd167fdd942b83592d59696c7b73bd Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 00:50:27 -0700
Subject: x86-64: move unlazy_fpu() into lazy cpu state part of context switch

Make sure that unlazy_fpu()'s stts gets batched along with the other
cpu state changes during context switch.  (32-bit already does this.)

This makes sure it gets batched when running paravirtualized.

[ Impact: optimise paravirtual FPU context switch ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/kernel/process_64.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ebefb5407b9..c9b8904736d 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -419,6 +419,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	load_TLS(next, cpu);
 
+	/* Must be after DS reload */
+	unlazy_fpu(prev_p);
+
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -459,9 +462,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
 	prev->gsindex = gsindex;
 
-	/* Must be after DS reload */
-	unlazy_fpu(prev_p);
-
 	/*
 	 * Switch the PDA and FPU contexts.
 	 */
-- 
cgit v1.2.3


From 17950c5b243f99cbabef173415ee988c52104d7e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 01:01:01 -0700
Subject: x86-64: move clts into batch cpu state updates when preloading fpu

When a task is likely to be using the fpu, we preload its state during
the context switch, rather than waiting for it to run an fpu instruction.
Make sure the clts() happens while we're doing batched fpu state updates
to optimise paravirtualized context switches.

[ Impact: optimise paravirtual FPU context switch ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/kernel/process_64.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index c9b8904736d..a28279dbb07 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -386,9 +386,17 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
+	bool preload_fpu;
+
+	/*
+	 * If the task has used fpu the last 5 timeslices, just do a full
+	 * restore of the math state immediately to avoid the trap; the
+	 * chances of needing FPU soon are obviously high now
+	 */
+	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
 
 	/* we're going to use this soon, after a few expensive things */
-	if (next_p->fpu_counter > 5)
+	if (preload_fpu)
 		prefetch(next->xstate);
 
 	/*
@@ -422,6 +430,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/* Must be after DS reload */
 	unlazy_fpu(prev_p);
 
+	/* Make sure cpu is ready for new context */
+	if (preload_fpu)
+		clts();
+
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -480,15 +492,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/* If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 *
-	 * tsk_used_math() checks prevent calling math_state_restore(),
-	 * which can sleep in the case of !tsk_used_math()
+	/*
+	 * Preload the FPU context, now that we've determined that the
+	 * task is likely to be using it. 
 	 */
-	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
-		math_state_restore();
+	if (preload_fpu)
+		__math_state_restore();
 	return prev_p;
 }
 
-- 
cgit v1.2.3


From 03b56ce54143a3a69d4fea6ff8130b1c903a47ce Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 18 Jun 2009 19:52:59 +0800
Subject: crypto: des_s390 - Permit weak keys unless REQ_WEAK_KEY set

Just started running fips cavs test vectors through an s390x system
for giggles, and discovered that I missed patching s390's arch-specific
des3 implementation w/an earlier des3 patch to permit weak keys.

This change adds the same flag tweaks as
ad79cdd77fc1466e45cf923890f66bcfe7c43f12 (crypto: des3_ede - permit
weak keys unless REQ_WEAK_KEY set) for s390's des3 implementation,
yields expected test results now.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/des_s390.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 4aba83b3159..2bc479ab3a6 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -250,8 +250,9 @@ static int des3_128_setkey(struct crypto_tfm *tfm, const u8 *key,
 	const u8 *temp_key = key;
 	u32 *flags = &tfm->crt_flags;
 
-	if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE))) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+	if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE)) &&
+	    (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
 		return -EINVAL;
 	}
 	for (i = 0; i < 2; i++, temp_key += DES_KEY_SIZE) {
@@ -411,9 +412,9 @@ static int des3_192_setkey(struct crypto_tfm *tfm, const u8 *key,
 
 	if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
 	    memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
-		   DES_KEY_SIZE))) {
-
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+		   DES_KEY_SIZE)) &&
+	    (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
 		return -EINVAL;
 	}
 	for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) {
-- 
cgit v1.2.3


From 21e70878215f620fe99ea7d7c74bc641aeec932f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Thu, 18 Jun 2009 17:09:27 +0530
Subject: x86: oprofile/op_model_amd.c set return values for
 op_amd_handle_ibs()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

op_amd_handle_ibs() should return 0 when IBS is not present or not defined.

Fix compilation warning:
 CC [M]  arch/x86/oprofile/op_model_amd.o
 arch/x86/oprofile/op_model_amd.c: In function ‘op_amd_handle_ibs’:
 arch/x86/oprofile/op_model_amd.c:217: warning: no return statement in function returning non-void

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index cc930467575..e95268eb922 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -132,7 +132,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	struct op_entry entry;
 
 	if (!has_ibs)
-		return 1;
+		return 0;
 
 	if (ibs_config.fetch_enabled) {
 		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
@@ -214,7 +214,10 @@ static void op_amd_stop_ibs(void)
 #else
 
 static inline int op_amd_handle_ibs(struct pt_regs * const regs,
-				    struct op_msrs const * const msrs) { }
+				    struct op_msrs const * const msrs)
+{
+	return 0;
+}
 static inline void op_amd_start_ibs(void) { }
 static inline void op_amd_stop_ibs(void) { }
 
-- 
cgit v1.2.3


From 4adc667593f83a18a8e54ce94f250fd166a272ac Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:16 +0200
Subject: x86: add copies of some headers to convert to asm-generic

Just an intermediate step to make reviewing easier.
These files are identical copies of the existing headers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/generic-mman.h        | 20 ++++++++
 arch/x86/include/asm/generic-module.h      | 80 ++++++++++++++++++++++++++++++
 arch/x86/include/asm/generic-scatterlist.h | 33 ++++++++++++
 arch/x86/include/asm/generic-types.h       | 30 +++++++++++
 arch/x86/include/asm/generic-ucontext.h    | 18 +++++++
 5 files changed, 181 insertions(+)
 create mode 100644 arch/x86/include/asm/generic-mman.h
 create mode 100644 arch/x86/include/asm/generic-module.h
 create mode 100644 arch/x86/include/asm/generic-scatterlist.h
 create mode 100644 arch/x86/include/asm/generic-types.h
 create mode 100644 arch/x86/include/asm/generic-ucontext.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/generic-mman.h b/arch/x86/include/asm/generic-mman.h
new file mode 100644
index 00000000000..751af2550ed
--- /dev/null
+++ b/arch/x86/include/asm/generic-mman.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_MMAN_H
+#define _ASM_X86_MMAN_H
+
+#include <asm-generic/mman-common.h>
+
+#define MAP_32BIT	0x40		/* only give out 32bit addresses */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/generic-module.h b/arch/x86/include/asm/generic-module.h
new file mode 100644
index 00000000000..47d62743c4d
--- /dev/null
+++ b/arch/x86/include/asm/generic-module.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_X86_MODULE_H
+#define _ASM_X86_MODULE_H
+
+/* x86_32/64 are simple */
+struct mod_arch_specific {};
+
+#ifdef CONFIG_X86_32
+# define Elf_Shdr Elf32_Shdr
+# define Elf_Sym Elf32_Sym
+# define Elf_Ehdr Elf32_Ehdr
+#else
+# define Elf_Shdr Elf64_Shdr
+# define Elf_Sym Elf64_Sym
+# define Elf_Ehdr Elf64_Ehdr
+#endif
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M386
+#define MODULE_PROC_FAMILY "386 "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_X86_ELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_4KSTACKS
+#  define MODULE_STACKSIZE "4KSTACKS "
+# else
+#  define MODULE_STACKSIZE ""
+# endif
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
+#endif
+
+#endif /* _ASM_X86_MODULE_H */
diff --git a/arch/x86/include/asm/generic-scatterlist.h b/arch/x86/include/asm/generic-scatterlist.h
new file mode 100644
index 00000000000..263d397d2ee
--- /dev/null
+++ b/arch/x86/include/asm/generic-scatterlist.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_SCATTERLIST_H
+#define _ASM_X86_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+	unsigned int	dma_length;
+};
+
+#define ARCH_HAS_SG_CHAIN
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifdef CONFIG_X86_32
+# define sg_dma_len(sg)		((sg)->length)
+#else
+# define sg_dma_len(sg)		((sg)->dma_length)
+#endif
+
+#endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/generic-types.h b/arch/x86/include/asm/generic-types.h
new file mode 100644
index 00000000000..09b97745772
--- /dev/null
+++ b/arch/x86/include/asm/generic-types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_X86_TYPES_H
+#define _ASM_X86_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef u64 dma64_addr_t;
+#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_TYPES_H */
diff --git a/arch/x86/include/asm/generic-ucontext.h b/arch/x86/include/asm/generic-ucontext.h
new file mode 100644
index 00000000000..87324cf439d
--- /dev/null
+++ b/arch/x86/include/asm/generic-ucontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_UCONTEXT_H
+#define _ASM_X86_UCONTEXT_H
+
+#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
+				 * information in the memory layout pointed
+				 * by the fpstate pointer in the ucontext's
+				 * sigcontext struct (uc_mcontext).
+				 */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_X86_UCONTEXT_H */
-- 
cgit v1.2.3


From 7bfd124d6dae7d394e73753300594a81a022fe7d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:17 +0200
Subject: x86: convert trivial headers to asm-generic version

For these nine header files, the asm-generic version should
be semantically identical to what is in x86. Change the
contents to be binary identical, for better review.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/ioctls.h   | 40 ++++++++++++++++++++++++++++------------
 arch/x86/include/asm/ipcbuf.h   | 15 ++++++++++-----
 arch/x86/include/asm/msgbuf.h   | 30 +++++++++++++++++++-----------
 arch/x86/include/asm/param.h    |  8 +++++---
 arch/x86/include/asm/shmbuf.h   | 28 ++++++++++++++++++----------
 arch/x86/include/asm/socket.h   | 10 +++++-----
 arch/x86/include/asm/sockios.h  |  6 +++---
 arch/x86/include/asm/termbits.h |  8 ++++----
 8 files changed, 92 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/ioctls.h b/arch/x86/include/asm/ioctls.h
index 0d5b23b7b06..a799e20a769 100644
--- a/arch/x86/include/asm/ioctls.h
+++ b/arch/x86/include/asm/ioctls.h
@@ -1,12 +1,23 @@
-#ifndef _ASM_X86_IOCTLS_H
-#define _ASM_X86_IOCTLS_H
+#ifndef __ASM_GENERIC_IOCTLS_H
+#define __ASM_GENERIC_IOCTLS_H
 
-#include <asm/ioctl.h>
+#include <linux/ioctl.h>
+
+/*
+ * These are the most common definitions for tty ioctl numbers.
+ * Most of them do not use the recommended _IOC(), but there is
+ * probably some source code out there hardcoding the number,
+ * so we might as well use them for all new platforms.
+ *
+ * The architectures that use different values here typically
+ * try to be compatible with some Unix variants for the same
+ * architecture.
+ */
 
 /* 0x54 is just a magic number to make these relatively unique ('T') */
 
 #define TCGETS		0x5401
-#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETS		0x5402
 #define TCSETSW		0x5403
 #define TCSETSF		0x5404
 #define TCGETA		0x5405
@@ -43,7 +54,6 @@
 #define TIOCSETD	0x5423
 #define TIOCGETD	0x5424
 #define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
 #define TIOCSBRK	0x5427  /* BSD compatibility */
 #define TIOCCBRK	0x5428  /* BSD compatibility */
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
@@ -53,8 +63,7 @@
 #define TCSETSF2	_IOW('T', 0x2D, struct termios2)
 #define TIOCGRS485	0x542E
 #define TIOCSRS485	0x542F
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-				/* Get Pty Number (of pty-mux device) */
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
 #define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
 #define TCSETX		0x5433
@@ -76,9 +85,16 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
-#define FIOQSIZE	0x5460
+
+/*
+ * some architectures define FIOQSIZE as 0x545E, which is used for
+ * TIOCGHAYESESP on others
+ */
+#ifndef FIOQSIZE
+# define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
+# define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
+# define FIOQSIZE	0x5460
+#endif
 
 /* Used for packet mode */
 #define TIOCPKT_DATA		 0
@@ -89,6 +105,6 @@
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
 
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 
-#endif /* _ASM_X86_IOCTLS_H */
+#endif /* __ASM_GENERIC_IOCTLS_H */
diff --git a/arch/x86/include/asm/ipcbuf.h b/arch/x86/include/asm/ipcbuf.h
index ee678fd5159..888ca1c8f95 100644
--- a/arch/x86/include/asm/ipcbuf.h
+++ b/arch/x86/include/asm/ipcbuf.h
@@ -1,13 +1,18 @@
-#ifndef _ASM_X86_IPCBUF_H
-#define _ASM_X86_IPCBUF_H
+#ifndef __ASM_GENERIC_IPCBUF_H
+#define __ASM_GENERIC_IPCBUF_H
 
 /*
- * The ipc64_perm structure for x86 architecture.
+ * The generic ipc64_perm structure:
  * Note extra padding because this structure is passed back and forth
  * between kernel and user space.
  *
+ * ipc64_perm was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
  * Pad space is left for:
- * - 32-bit mode_t and seq
+ * - 32-bit mode_t on architectures that only had 16 bit
+ * - 32-bit seq
  * - 2 miscellaneous 32-bit values
  */
 
@@ -25,4 +30,4 @@ struct ipc64_perm {
 	unsigned long		__unused2;
 };
 
-#endif /* _ASM_X86_IPCBUF_H */
+#endif /* __ASM_GENERIC_IPCBUF_H */
diff --git a/arch/x86/include/asm/msgbuf.h b/arch/x86/include/asm/msgbuf.h
index 7e4e9481f51..aec850d9159 100644
--- a/arch/x86/include/asm/msgbuf.h
+++ b/arch/x86/include/asm/msgbuf.h
@@ -1,30 +1,38 @@
-#ifndef _ASM_X86_MSGBUF_H
-#define _ASM_X86_MSGBUF_H
+#ifndef __ASM_GENERIC_MSGBUF_H
+#define __ASM_GENERIC_MSGBUF_H
 
+#include <asm/bitsperlong.h>
 /*
- * The msqid64_ds structure for i386 architecture.
+ * generic msqid64_ds structure.
+ *
  * Note extra padding because this structure is passed back and forth
  * between kernel and user space.
  *
- * Pad space on i386 is left for:
+ * msqid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first three padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
  * - 64-bit time_t to solve y2038 problem
  * - 2 miscellaneous 32-bit values
- *
- * Pad space on x8664 is left for:
- * - 2 miscellaneous 64-bit values
  */
+
 struct msqid64_ds {
 	struct ipc64_perm msg_perm;
 	__kernel_time_t msg_stime;	/* last msgsnd time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long	__unused1;
 #endif
 	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long	__unused2;
 #endif
 	__kernel_time_t msg_ctime;	/* last change time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long	__unused3;
 #endif
 	unsigned long  msg_cbytes;	/* current number of bytes on queue */
@@ -36,4 +44,4 @@ struct msqid64_ds {
 	unsigned long  __unused5;
 };
 
-#endif /* _ASM_X86_MSGBUF_H */
+#endif /* __ASM_GENERIC_MSGBUF_H */
diff --git a/arch/x86/include/asm/param.h b/arch/x86/include/asm/param.h
index 6f0d0422f4c..cdf8251bfb6 100644
--- a/arch/x86/include/asm/param.h
+++ b/arch/x86/include/asm/param.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PARAM_H
-#define _ASM_X86_PARAM_H
+#ifndef __ASM_GENERIC_PARAM_H
+#define __ASM_GENERIC_PARAM_H
 
 #ifdef __KERNEL__
 # define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
@@ -11,7 +11,9 @@
 #define HZ 100
 #endif
 
+#ifndef EXEC_PAGESIZE
 #define EXEC_PAGESIZE	4096
+#endif
 
 #ifndef NOGROUP
 #define NOGROUP		(-1)
@@ -19,4 +21,4 @@
 
 #define MAXHOSTNAMELEN	64	/* max length of hostname */
 
-#endif /* _ASM_X86_PARAM_H */
+#endif /* __ASM_GENERIC_PARAM_H */
diff --git a/arch/x86/include/asm/shmbuf.h b/arch/x86/include/asm/shmbuf.h
index b51413b7497..5768fa60ac8 100644
--- a/arch/x86/include/asm/shmbuf.h
+++ b/arch/x86/include/asm/shmbuf.h
@@ -1,32 +1,40 @@
-#ifndef _ASM_X86_SHMBUF_H
-#define _ASM_X86_SHMBUF_H
+#ifndef __ASM_GENERIC_SHMBUF_H
+#define __ASM_GENERIC_SHMBUF_H
+
+#include <asm/bitsperlong.h>
 
 /*
  * The shmid64_ds structure for x86 architecture.
  * Note extra padding because this structure is passed back and forth
  * between kernel and user space.
  *
- * Pad space on 32 bit is left for:
+ * shmid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ *
+ * Pad space is left for:
  * - 64-bit time_t to solve y2038 problem
  * - 2 miscellaneous 32-bit values
- *
- * Pad space on 64 bit is left for:
- * - 2 miscellaneous 64-bit values
  */
 
 struct shmid64_ds {
 	struct ipc64_perm	shm_perm;	/* operation perms */
 	size_t			shm_segsz;	/* size of segment (bytes) */
 	__kernel_time_t		shm_atime;	/* last attach time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long		__unused1;
 #endif
 	__kernel_time_t		shm_dtime;	/* last detach time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long		__unused2;
 #endif
 	__kernel_time_t		shm_ctime;	/* last change time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long		__unused3;
 #endif
 	__kernel_pid_t		shm_cpid;	/* pid of creator */
@@ -48,4 +56,4 @@ struct shminfo64 {
 	unsigned long	__unused4;
 };
 
-#endif /* _ASM_X86_SHMBUF_H */
+#endif /* __ASM_GENERIC_SHMBUF_H */
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index ca8bf2cd0ba..d4ae42a06a2 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SOCKET_H
-#define _ASM_X86_SOCKET_H
+#ifndef __ASM_GENERIC_SOCKET_H
+#define __ASM_GENERIC_SOCKET_H
 
 #include <asm/sockios.h>
 
@@ -38,8 +38,8 @@
 #define SO_BINDTODEVICE	25
 
 /* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
 
 #define SO_PEERNAME		28
 #define SO_TIMESTAMP		29
@@ -57,4 +57,4 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
-#endif /* _ASM_X86_SOCKET_H */
+#endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/arch/x86/include/asm/sockios.h b/arch/x86/include/asm/sockios.h
index 49cc72b5d3c..9a61a369b90 100644
--- a/arch/x86/include/asm/sockios.h
+++ b/arch/x86/include/asm/sockios.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SOCKIOS_H
-#define _ASM_X86_SOCKIOS_H
+#ifndef __ASM_GENERIC_SOCKIOS_H
+#define __ASM_GENERIC_SOCKIOS_H
 
 /* Socket-level I/O control calls. */
 #define FIOSETOWN	0x8901
@@ -10,4 +10,4 @@
 #define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
 #define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
 
-#endif /* _ASM_X86_SOCKIOS_H */
+#endif /* __ASM_GENERIC_SOCKIOS_H */
diff --git a/arch/x86/include/asm/termbits.h b/arch/x86/include/asm/termbits.h
index af1b70ea440..1c9773d48cb 100644
--- a/arch/x86/include/asm/termbits.h
+++ b/arch/x86/include/asm/termbits.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TERMBITS_H
-#define _ASM_X86_TERMBITS_H
+#ifndef __ASM_GENERIC_TERMBITS_H
+#define __ASM_GENERIC_TERMBITS_H
 
 #include <linux/posix_types.h>
 
@@ -140,7 +140,7 @@ struct ktermios {
 #define HUPCL	0002000
 #define CLOCAL	0004000
 #define CBAUDEX 0010000
-#define	   BOTHER 0010000		/* non standard rate */
+#define    BOTHER 0010000
 #define    B57600 0010001
 #define   B115200 0010002
 #define   B230400 0010003
@@ -195,4 +195,4 @@ struct ktermios {
 #define	TCSADRAIN	1
 #define	TCSAFLUSH	2
 
-#endif /* _ASM_X86_TERMBITS_H */
+#endif /* __ASM_GENERIC_TERMBITS_H */
-- 
cgit v1.2.3


From 06f5013aa8eb5895ced2c71d13f5114103605555 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:18 +0200
Subject: x86: convert almost generic headers to asm-generic version

In x86, mman.h, module.h, scatterlist.h, types.h and ucontext.h
can use the asm-generic version by just defining the x86
specific parts locally and falling back on the generic code
for the common bits.

This patch illustrates the differences between the x86 and
asm-generic versions by changing a file that is initially
identical to the x86 version to one that is identical
to the asm-generic version.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/generic-mman.h        |  8 +--
 arch/x86/include/asm/generic-module.h      | 92 ++++++------------------------
 arch/x86/include/asm/generic-scatterlist.h | 34 +++++++----
 arch/x86/include/asm/generic-types.h       | 32 +++++++----
 arch/x86/include/asm/generic-ucontext.h    | 12 +---
 arch/x86/include/asm/mman.h                | 14 +----
 arch/x86/include/asm/module.h              | 13 +----
 arch/x86/include/asm/scatterlist.h         | 27 +--------
 arch/x86/include/asm/types.h               | 12 +---
 arch/x86/include/asm/ucontext.h            |  8 +--
 10 files changed, 73 insertions(+), 179 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/generic-mman.h b/arch/x86/include/asm/generic-mman.h
index 751af2550ed..7cab4de2bca 100644
--- a/arch/x86/include/asm/generic-mman.h
+++ b/arch/x86/include/asm/generic-mman.h
@@ -1,10 +1,8 @@
-#ifndef _ASM_X86_MMAN_H
-#define _ASM_X86_MMAN_H
+#ifndef __ASM_GENERIC_MMAN_H
+#define __ASM_GENERIC_MMAN_H
 
 #include <asm-generic/mman-common.h>
 
-#define MAP_32BIT	0x40		/* only give out 32bit addresses */
-
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
 #define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
@@ -17,4 +15,4 @@
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
 
-#endif /* _ASM_X86_MMAN_H */
+#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/arch/x86/include/asm/generic-module.h b/arch/x86/include/asm/generic-module.h
index 47d62743c4d..ed5b44de4c9 100644
--- a/arch/x86/include/asm/generic-module.h
+++ b/arch/x86/include/asm/generic-module.h
@@ -1,80 +1,22 @@
-#ifndef _ASM_X86_MODULE_H
-#define _ASM_X86_MODULE_H
+#ifndef __ASM_GENERIC_MODULE_H
+#define __ASM_GENERIC_MODULE_H
 
-/* x86_32/64 are simple */
-struct mod_arch_specific {};
+/*
+ * Many architectures just need a simple module
+ * loader without arch specific data.
+ */
+struct mod_arch_specific
+{
+};
 
-#ifdef CONFIG_X86_32
-# define Elf_Shdr Elf32_Shdr
-# define Elf_Sym Elf32_Sym
-# define Elf_Ehdr Elf32_Ehdr
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
 #else
-# define Elf_Shdr Elf64_Shdr
-# define Elf_Sym Elf64_Sym
-# define Elf_Ehdr Elf64_Ehdr
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
 #endif
 
-#ifdef CONFIG_X86_64
-/* X86_64 does not define MODULE_PROC_FAMILY */
-#elif defined CONFIG_M386
-#define MODULE_PROC_FAMILY "386 "
-#elif defined CONFIG_M486
-#define MODULE_PROC_FAMILY "486 "
-#elif defined CONFIG_M586
-#define MODULE_PROC_FAMILY "586 "
-#elif defined CONFIG_M586TSC
-#define MODULE_PROC_FAMILY "586TSC "
-#elif defined CONFIG_M586MMX
-#define MODULE_PROC_FAMILY "586MMX "
-#elif defined CONFIG_MCORE2
-#define MODULE_PROC_FAMILY "CORE2 "
-#elif defined CONFIG_M686
-#define MODULE_PROC_FAMILY "686 "
-#elif defined CONFIG_MPENTIUMII
-#define MODULE_PROC_FAMILY "PENTIUMII "
-#elif defined CONFIG_MPENTIUMIII
-#define MODULE_PROC_FAMILY "PENTIUMIII "
-#elif defined CONFIG_MPENTIUMM
-#define MODULE_PROC_FAMILY "PENTIUMM "
-#elif defined CONFIG_MPENTIUM4
-#define MODULE_PROC_FAMILY "PENTIUM4 "
-#elif defined CONFIG_MK6
-#define MODULE_PROC_FAMILY "K6 "
-#elif defined CONFIG_MK7
-#define MODULE_PROC_FAMILY "K7 "
-#elif defined CONFIG_MK8
-#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_X86_ELAN
-#define MODULE_PROC_FAMILY "ELAN "
-#elif defined CONFIG_MCRUSOE
-#define MODULE_PROC_FAMILY "CRUSOE "
-#elif defined CONFIG_MEFFICEON
-#define MODULE_PROC_FAMILY "EFFICEON "
-#elif defined CONFIG_MWINCHIPC6
-#define MODULE_PROC_FAMILY "WINCHIPC6 "
-#elif defined CONFIG_MWINCHIP3D
-#define MODULE_PROC_FAMILY "WINCHIP3D "
-#elif defined CONFIG_MCYRIXIII
-#define MODULE_PROC_FAMILY "CYRIXIII "
-#elif defined CONFIG_MVIAC3_2
-#define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif defined CONFIG_MVIAC7
-#define MODULE_PROC_FAMILY "VIAC7 "
-#elif defined CONFIG_MGEODEGX1
-#define MODULE_PROC_FAMILY "GEODEGX1 "
-#elif defined CONFIG_MGEODE_LX
-#define MODULE_PROC_FAMILY "GEODE "
-#else
-#error unknown processor family
-#endif
-
-#ifdef CONFIG_X86_32
-# ifdef CONFIG_4KSTACKS
-#  define MODULE_STACKSIZE "4KSTACKS "
-# else
-#  define MODULE_STACKSIZE ""
-# endif
-# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
-#endif
-
-#endif /* _ASM_X86_MODULE_H */
+#endif /* __ASM_GENERIC_MODULE_H */
diff --git a/arch/x86/include/asm/generic-scatterlist.h b/arch/x86/include/asm/generic-scatterlist.h
index 263d397d2ee..8b9454496a7 100644
--- a/arch/x86/include/asm/generic-scatterlist.h
+++ b/arch/x86/include/asm/generic-scatterlist.h
@@ -1,7 +1,7 @@
-#ifndef _ASM_X86_SCATTERLIST_H
-#define _ASM_X86_SCATTERLIST_H
+#ifndef __ASM_GENERIC_SCATTERLIST_H
+#define __ASM_GENERIC_SCATTERLIST_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 struct scatterlist {
 #ifdef CONFIG_DEBUG_SG
@@ -14,20 +14,30 @@ struct scatterlist {
 	unsigned int	dma_length;
 };
 
-#define ARCH_HAS_SG_CHAIN
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
 /*
- * These macros should be used after a pci_map_sg call has been done
+ * These macros should be used after a dma_map_sg call has been done
  * to get bus addresses of each of the SG entries and their lengths.
  * You should only work with the number of sg entries pci_map_sg
- * returns.
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
  */
 #define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef CONFIG_X86_32
-# define sg_dma_len(sg)		((sg)->length)
+#ifndef sg_dma_len
+/*
+ * Normally, you have an iommu on 64 bit machines, but not on 32 bit
+ * machines. Architectures that are differnt should override this.
+ */
+#if __BITS_PER_LONG == 64
+#define sg_dma_len(sg)		((sg)->dma_length)
 #else
-# define sg_dma_len(sg)		((sg)->dma_length)
+#define sg_dma_len(sg)		((sg)->length)
+#endif /* 64 bit */
+#endif /* sg_dma_len */
+
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(~0UL)
 #endif
 
-#endif /* _ASM_X86_SCATTERLIST_H */
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/generic-types.h b/arch/x86/include/asm/generic-types.h
index 09b97745772..fba7d33ca3f 100644
--- a/arch/x86/include/asm/generic-types.h
+++ b/arch/x86/include/asm/generic-types.h
@@ -1,6 +1,9 @@
-#ifndef _ASM_X86_TYPES_H
-#define _ASM_X86_TYPES_H
-
+#ifndef _ASM_GENERIC_TYPES_H
+#define _ASM_GENERIC_TYPES_H
+/*
+ * int-ll64 is used practically everywhere now,
+ * so use it as a reasonable default.
+ */
 #include <asm-generic/int-ll64.h>
 
 #ifndef __ASSEMBLY__
@@ -13,18 +16,27 @@ typedef unsigned short umode_t;
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
-
-typedef u64 dma64_addr_t;
-#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
-/* DMA addresses come in 32-bit and 64-bit flavours. */
+/*
+ * DMA addresses may be very different from physical addresses
+ * and pointers. i386 and powerpc may have 64 bit DMA on 32 bit
+ * systems, while sparc64 uses 32 bit DMA addresses for 64 bit
+ * physical addresses.
+ * This default defines dma_addr_t to have the same size as
+ * phys_addr_t, which is the most common way.
+ * Do not define the dma64_addr_t type, which never really
+ * worked.
+ */
+#ifndef dma_addr_t
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
 typedef u64 dma_addr_t;
 #else
 typedef u32 dma_addr_t;
-#endif
+#endif /* CONFIG_PHYS_ADDR_T_64BIT */
+#endif /* dma_addr_t */
 
 #endif /* __ASSEMBLY__ */
+
 #endif /* __KERNEL__ */
 
-#endif /* _ASM_X86_TYPES_H */
+#endif /* _ASM_GENERIC_TYPES_H */
diff --git a/arch/x86/include/asm/generic-ucontext.h b/arch/x86/include/asm/generic-ucontext.h
index 87324cf439d..ad77343e8a9 100644
--- a/arch/x86/include/asm/generic-ucontext.h
+++ b/arch/x86/include/asm/generic-ucontext.h
@@ -1,11 +1,5 @@
-#ifndef _ASM_X86_UCONTEXT_H
-#define _ASM_X86_UCONTEXT_H
-
-#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
-				 * information in the memory layout pointed
-				 * by the fpstate pointer in the ucontext's
-				 * sigcontext struct (uc_mcontext).
-				 */
+#ifndef __ASM_GENERIC_UCONTEXT_H
+#define __ASM_GENERIC_UCONTEXT_H
 
 struct ucontext {
 	unsigned long	  uc_flags;
@@ -15,4 +9,4 @@ struct ucontext {
 	sigset_t	  uc_sigmask;	/* mask last for extensibility */
 };
 
-#endif /* _ASM_X86_UCONTEXT_H */
+#endif /* __ASM_GENERIC_UCONTEXT_H */
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
index 751af2550ed..063d8c9e4d6 100644
--- a/arch/x86/include/asm/mman.h
+++ b/arch/x86/include/asm/mman.h
@@ -1,20 +1,8 @@
 #ifndef _ASM_X86_MMAN_H
 #define _ASM_X86_MMAN_H
 
-#include <asm-generic/mman-common.h>
-
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
+#include <asm/generic-mman.h>
 
 #endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 47d62743c4d..4a7a192910d 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -1,18 +1,7 @@
 #ifndef _ASM_X86_MODULE_H
 #define _ASM_X86_MODULE_H
 
-/* x86_32/64 are simple */
-struct mod_arch_specific {};
-
-#ifdef CONFIG_X86_32
-# define Elf_Shdr Elf32_Shdr
-# define Elf_Sym Elf32_Sym
-# define Elf_Ehdr Elf32_Ehdr
-#else
-# define Elf_Shdr Elf64_Shdr
-# define Elf_Sym Elf64_Sym
-# define Elf_Ehdr Elf64_Ehdr
-#endif
+#include <asm/generic-module.h>
 
 #ifdef CONFIG_X86_64
 /* X86_64 does not define MODULE_PROC_FAMILY */
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index 263d397d2ee..2097d686471 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -1,33 +1,8 @@
 #ifndef _ASM_X86_SCATTERLIST_H
 #define _ASM_X86_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	unsigned int	length;
-	dma_addr_t	dma_address;
-	unsigned int	dma_length;
-};
-
-#define ARCH_HAS_SG_CHAIN
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef CONFIG_X86_32
-# define sg_dma_len(sg)		((sg)->length)
-#else
-# define sg_dma_len(sg)		((sg)->dma_length)
-#endif
+#include <asm/generic-scatterlist.h>
 
 #endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index 09b97745772..f2fe528e968 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -1,19 +1,11 @@
 #ifndef _ASM_X86_TYPES_H
 #define _ASM_X86_TYPES_H
 
-#include <asm-generic/int-ll64.h>
+#define dma_addr_t	dma_addr_t
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
+#include <asm/generic-types.h>
 
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
 #ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma64_addr_t;
diff --git a/arch/x86/include/asm/ucontext.h b/arch/x86/include/asm/ucontext.h
index 87324cf439d..7cfc436f86d 100644
--- a/arch/x86/include/asm/ucontext.h
+++ b/arch/x86/include/asm/ucontext.h
@@ -7,12 +7,6 @@
 				 * sigcontext struct (uc_mcontext).
 				 */
 
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
+#include <asm/generic-ucontext.h>
 
 #endif /* _ASM_X86_UCONTEXT_H */
-- 
cgit v1.2.3


From 69d5ffdaad7b77b97229b55c36afb20e5bebd29e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:19 +0200
Subject: x86: convert termios.h to the asm-generic version

This patch turned out more controversial than expected
and may get dropped in the future. I'm including it
for reference anyway.

The user_termio_to_kernel_termios and kernel_termios_to_user_termio
functions on x86 are lacking error checking from get_user and
are not portable to big-endian systems, so the asm-generic
header has to differ in this regard.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/termios.h | 86 +++++++++++++++++++++++++++++++-----------
 1 file changed, 63 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
index c4ee8056bac..d0922adc56d 100644
--- a/arch/x86/include/asm/termios.h
+++ b/arch/x86/include/asm/termios.h
@@ -1,5 +1,12 @@
-#ifndef _ASM_X86_TERMIOS_H
-#define _ASM_X86_TERMIOS_H
+#ifndef _ASM_GENERIC_TERMIOS_H
+#define _ASM_GENERIC_TERMIOS_H
+/*
+ * Most architectures have straight copies of the x86 code, with
+ * varying levels of bug fixes on top. Usually it's a good idea
+ * to use this generic version instead, but be careful to avoid
+ * ABI changes.
+ * New architectures should not provide their own version.
+ */
 
 #include <asm/termbits.h>
 #include <asm/ioctls.h>
@@ -54,37 +61,57 @@ struct termio {
 /*
  * Translate a "termio" structure into a "termios". Ugh.
  */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
 static inline int user_termio_to_kernel_termios(struct ktermios *termios,
-						struct termio __user *termio)
+						const struct termio __user *termio)
 {
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
-	get_user(termios->c_line, &termio->c_line);
-	return copy_from_user(termios->c_cc, termio->c_cc, NCC);
+	unsigned short tmp;
+
+	if (get_user(tmp, &termio->c_iflag) < 0)
+		goto fault;
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
+
+	if (get_user(tmp, &termio->c_oflag) < 0)
+		goto fault;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
+
+	if (get_user(tmp, &termio->c_cflag) < 0)
+		goto fault;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
+
+	if (get_user(tmp, &termio->c_lflag) < 0)
+		goto fault;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
+
+	if (get_user(termios->c_line, &termio->c_line) < 0)
+		goto fault;
+
+	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
+		goto fault;
+
+	return 0;
+
+ fault:
+	return -EFAULT;
 }
 
 /*
  * Translate a "termios" structure into a "termio". Ugh.
  */
 static inline int kernel_termios_to_user_termio(struct termio __user *termio,
-					    struct ktermios *termios)
+						struct ktermios *termios)
 {
-	put_user((termios)->c_iflag, &(termio)->c_iflag);
-	put_user((termios)->c_oflag, &(termio)->c_oflag);
-	put_user((termios)->c_cflag, &(termio)->c_cflag);
-	put_user((termios)->c_lflag, &(termio)->c_lflag);
-	put_user((termios)->c_line,  &(termio)->c_line);
-	return copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);
+	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
+	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
+	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
+	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
+	    put_user(termios->c_line,  &termio->c_line) < 0 ||
+	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
+		return -EFAULT;
+
+	return 0;
 }
 
+#ifdef TCGETS2
 static inline int user_termios_to_kernel_termios(struct ktermios *k,
 						 struct termios2 __user *u)
 {
@@ -108,7 +135,20 @@ static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
 {
 	return copy_to_user(u, k, sizeof(struct termios));
 }
+#else /* TCGETS2 */
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#endif /* TCGETS2 */
 
 #endif	/* __KERNEL__ */
 
-#endif /* _ASM_X86_TERMIOS_H */
+#endif /* _ASM_GENERIC_TERMIOS_H */
-- 
cgit v1.2.3


From 73a2d096fdf23aa841f7595d114a11ec85a85e4d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:20 +0200
Subject: x86: remove all now-duplicate header files

All files that have been made identical to the asm-generic
version in the previous patches can now be removed,
guaranteeing that this does not introduce semantic changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/generic-mman.h        |  18 ---
 arch/x86/include/asm/generic-module.h      |  22 ----
 arch/x86/include/asm/generic-scatterlist.h |  43 -------
 arch/x86/include/asm/generic-types.h       |  42 ------
 arch/x86/include/asm/generic-ucontext.h    |  12 --
 arch/x86/include/asm/ioctls.h              | 111 +---------------
 arch/x86/include/asm/ipcbuf.h              |  34 +----
 arch/x86/include/asm/mman.h                |   2 +-
 arch/x86/include/asm/module.h              |   2 +-
 arch/x86/include/asm/msgbuf.h              |  48 +------
 arch/x86/include/asm/param.h               |  25 +---
 arch/x86/include/asm/scatterlist.h         |   2 +-
 arch/x86/include/asm/shmbuf.h              |  60 +--------
 arch/x86/include/asm/socket.h              |  61 +--------
 arch/x86/include/asm/sockios.h             |  14 +-
 arch/x86/include/asm/termbits.h            | 199 +----------------------------
 arch/x86/include/asm/termios.h             | 155 +---------------------
 arch/x86/include/asm/types.h               |   2 +-
 arch/x86/include/asm/ucontext.h            |   2 +-
 19 files changed, 14 insertions(+), 840 deletions(-)
 delete mode 100644 arch/x86/include/asm/generic-mman.h
 delete mode 100644 arch/x86/include/asm/generic-module.h
 delete mode 100644 arch/x86/include/asm/generic-scatterlist.h
 delete mode 100644 arch/x86/include/asm/generic-types.h
 delete mode 100644 arch/x86/include/asm/generic-ucontext.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/generic-mman.h b/arch/x86/include/asm/generic-mman.h
deleted file mode 100644
index 7cab4de2bca..00000000000
--- a/arch/x86/include/asm/generic-mman.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_GENERIC_MMAN_H
-#define __ASM_GENERIC_MMAN_H
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/arch/x86/include/asm/generic-module.h b/arch/x86/include/asm/generic-module.h
deleted file mode 100644
index ed5b44de4c9..00000000000
--- a/arch/x86/include/asm/generic-module.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_GENERIC_MODULE_H
-#define __ASM_GENERIC_MODULE_H
-
-/*
- * Many architectures just need a simple module
- * loader without arch specific data.
- */
-struct mod_arch_specific
-{
-};
-
-#ifdef CONFIG_64BIT
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Sym Elf64_Sym
-#define Elf_Ehdr Elf64_Ehdr
-#else
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-#endif
-
-#endif /* __ASM_GENERIC_MODULE_H */
diff --git a/arch/x86/include/asm/generic-scatterlist.h b/arch/x86/include/asm/generic-scatterlist.h
deleted file mode 100644
index 8b9454496a7..00000000000
--- a/arch/x86/include/asm/generic-scatterlist.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef __ASM_GENERIC_SCATTERLIST_H
-#define __ASM_GENERIC_SCATTERLIST_H
-
-#include <linux/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	unsigned int	length;
-	dma_addr_t	dma_address;
-	unsigned int	dma_length;
-};
-
-/*
- * These macros should be used after a dma_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#ifndef sg_dma_len
-/*
- * Normally, you have an iommu on 64 bit machines, but not on 32 bit
- * machines. Architectures that are differnt should override this.
- */
-#if __BITS_PER_LONG == 64
-#define sg_dma_len(sg)		((sg)->dma_length)
-#else
-#define sg_dma_len(sg)		((sg)->length)
-#endif /* 64 bit */
-#endif /* sg_dma_len */
-
-#ifndef ISA_DMA_THRESHOLD
-#define ISA_DMA_THRESHOLD	(~0UL)
-#endif
-
-#define ARCH_HAS_SG_CHAIN
-
-#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/generic-types.h b/arch/x86/include/asm/generic-types.h
deleted file mode 100644
index fba7d33ca3f..00000000000
--- a/arch/x86/include/asm/generic-types.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASM_GENERIC_TYPES_H
-#define _ASM_GENERIC_TYPES_H
-/*
- * int-ll64 is used practically everywhere now,
- * so use it as a reasonable default.
- */
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-/*
- * DMA addresses may be very different from physical addresses
- * and pointers. i386 and powerpc may have 64 bit DMA on 32 bit
- * systems, while sparc64 uses 32 bit DMA addresses for 64 bit
- * physical addresses.
- * This default defines dma_addr_t to have the same size as
- * phys_addr_t, which is the most common way.
- * Do not define the dma64_addr_t type, which never really
- * worked.
- */
-#ifndef dma_addr_t
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif /* CONFIG_PHYS_ADDR_T_64BIT */
-#endif /* dma_addr_t */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_GENERIC_TYPES_H */
diff --git a/arch/x86/include/asm/generic-ucontext.h b/arch/x86/include/asm/generic-ucontext.h
deleted file mode 100644
index ad77343e8a9..00000000000
--- a/arch/x86/include/asm/generic-ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ASM_GENERIC_UCONTEXT_H
-#define __ASM_GENERIC_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* __ASM_GENERIC_UCONTEXT_H */
diff --git a/arch/x86/include/asm/ioctls.h b/arch/x86/include/asm/ioctls.h
index a799e20a769..ec34c760665 100644
--- a/arch/x86/include/asm/ioctls.h
+++ b/arch/x86/include/asm/ioctls.h
@@ -1,110 +1 @@
-#ifndef __ASM_GENERIC_IOCTLS_H
-#define __ASM_GENERIC_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/*
- * These are the most common definitions for tty ioctl numbers.
- * Most of them do not use the recommended _IOC(), but there is
- * probably some source code out there hardcoding the number,
- * so we might as well use them for all new platforms.
- *
- * The architectures that use different values here typically
- * try to be compatible with some Unix variants for the same
- * architecture.
- */
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T', 0x2A, struct termios2)
-#define TCSETS2		_IOW('T', 0x2B, struct termios2)
-#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
-#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
-#define TIOCGRS485	0x542E
-#define TIOCSRS485	0x542F
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
-#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
-#define TCSETX		0x5433
-#define TCSETXF		0x5434
-#define TCSETXW		0x5435
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-
-/*
- * some architectures define FIOQSIZE as 0x545E, which is used for
- * TIOCGHAYESESP on others
- */
-#ifndef FIOQSIZE
-# define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
-# define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
-# define FIOQSIZE	0x5460
-#endif
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
-
-#endif /* __ASM_GENERIC_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/x86/include/asm/ipcbuf.h b/arch/x86/include/asm/ipcbuf.h
index 888ca1c8f95..84c7e51cb6d 100644
--- a/arch/x86/include/asm/ipcbuf.h
+++ b/arch/x86/include/asm/ipcbuf.h
@@ -1,33 +1 @@
-#ifndef __ASM_GENERIC_IPCBUF_H
-#define __ASM_GENERIC_IPCBUF_H
-
-/*
- * The generic ipc64_perm structure:
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * ipc64_perm was originally meant to be architecture specific, but
- * everyone just ended up making identical copies without specific
- * optimizations, so we may just as well all use the same one.
- *
- * Pad space is left for:
- * - 32-bit mode_t on architectures that only had 16 bit
- * - 32-bit seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __ASM_GENERIC_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
index 063d8c9e4d6..593e51d4643 100644
--- a/arch/x86/include/asm/mman.h
+++ b/arch/x86/include/asm/mman.h
@@ -3,6 +3,6 @@
 
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
-#include <asm/generic-mman.h>
+#include <asm-generic/mman.h>
 
 #endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 4a7a192910d..555bc12bdcd 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_X86_MODULE_H
 #define _ASM_X86_MODULE_H
 
-#include <asm/generic-module.h>
+#include <asm-generic/module.h>
 
 #ifdef CONFIG_X86_64
 /* X86_64 does not define MODULE_PROC_FAMILY */
diff --git a/arch/x86/include/asm/msgbuf.h b/arch/x86/include/asm/msgbuf.h
index aec850d9159..809134c644a 100644
--- a/arch/x86/include/asm/msgbuf.h
+++ b/arch/x86/include/asm/msgbuf.h
@@ -1,47 +1 @@
-#ifndef __ASM_GENERIC_MSGBUF_H
-#define __ASM_GENERIC_MSGBUF_H
-
-#include <asm/bitsperlong.h>
-/*
- * generic msqid64_ds structure.
- *
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * msqid64_ds was originally meant to be architecture specific, but
- * everyone just ended up making identical copies without specific
- * optimizations, so we may just as well all use the same one.
- *
- * 64 bit architectures typically define a 64 bit __kernel_time_t,
- * so they do not need the first three padding words.
- * On big-endian systems, the padding is in the wrong place.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-#if __BITS_PER_LONG != 64
-	unsigned long	__unused1;
-#endif
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#if __BITS_PER_LONG != 64
-	unsigned long	__unused2;
-#endif
-	__kernel_time_t msg_ctime;	/* last change time */
-#if __BITS_PER_LONG != 64
-	unsigned long	__unused3;
-#endif
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* __ASM_GENERIC_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/x86/include/asm/param.h b/arch/x86/include/asm/param.h
index cdf8251bfb6..965d4542797 100644
--- a/arch/x86/include/asm/param.h
+++ b/arch/x86/include/asm/param.h
@@ -1,24 +1 @@
-#ifndef __ASM_GENERIC_PARAM_H
-#define __ASM_GENERIC_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* some user interfaces are */
-# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#ifndef EXEC_PAGESIZE
-#define EXEC_PAGESIZE	4096
-#endif
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* __ASM_GENERIC_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index 2097d686471..75af592677e 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -3,6 +3,6 @@
 
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-#include <asm/generic-scatterlist.h>
+#include <asm-generic/scatterlist.h>
 
 #endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/shmbuf.h b/arch/x86/include/asm/shmbuf.h
index 5768fa60ac8..83c05fc2de3 100644
--- a/arch/x86/include/asm/shmbuf.h
+++ b/arch/x86/include/asm/shmbuf.h
@@ -1,59 +1 @@
-#ifndef __ASM_GENERIC_SHMBUF_H
-#define __ASM_GENERIC_SHMBUF_H
-
-#include <asm/bitsperlong.h>
-
-/*
- * The shmid64_ds structure for x86 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * shmid64_ds was originally meant to be architecture specific, but
- * everyone just ended up making identical copies without specific
- * optimizations, so we may just as well all use the same one.
- *
- * 64 bit architectures typically define a 64 bit __kernel_time_t,
- * so they do not need the first two padding words.
- * On big-endian systems, the padding is in the wrong place.
- *
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-#if __BITS_PER_LONG != 64
-	unsigned long		__unused1;
-#endif
-	__kernel_time_t		shm_dtime;	/* last detach time */
-#if __BITS_PER_LONG != 64
-	unsigned long		__unused2;
-#endif
-	__kernel_time_t		shm_ctime;	/* last change time */
-#if __BITS_PER_LONG != 64
-	unsigned long		__unused3;
-#endif
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __ASM_GENERIC_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index d4ae42a06a2..6b71384b9d8 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -1,60 +1 @@
-#ifndef __ASM_GENERIC_SOCKET_H
-#define __ASM_GENERIC_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif /* __ASM_GENERIC_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/x86/include/asm/sockios.h b/arch/x86/include/asm/sockios.h
index 9a61a369b90..def6d4746ee 100644
--- a/arch/x86/include/asm/sockios.h
+++ b/arch/x86/include/asm/sockios.h
@@ -1,13 +1 @@
-#ifndef __ASM_GENERIC_SOCKIOS_H
-#define __ASM_GENERIC_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* __ASM_GENERIC_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/x86/include/asm/termbits.h b/arch/x86/include/asm/termbits.h
index 1c9773d48cb..3935b106de7 100644
--- a/arch/x86/include/asm/termbits.h
+++ b/arch/x86/include/asm/termbits.h
@@ -1,198 +1 @@
-#ifndef __ASM_GENERIC_TERMBITS_H
-#define __ASM_GENERIC_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000	/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000	/* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __ASM_GENERIC_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
index d0922adc56d..280d78a9d96 100644
--- a/arch/x86/include/asm/termios.h
+++ b/arch/x86/include/asm/termios.h
@@ -1,154 +1 @@
-#ifndef _ASM_GENERIC_TERMIOS_H
-#define _ASM_GENERIC_TERMIOS_H
-/*
- * Most architectures have straight copies of the x86 code, with
- * varying levels of bug fixes on top. Usually it's a good idea
- * to use this generic version instead, but be careful to avoid
- * ABI changes.
- * New architectures should not provide their own version.
- */
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-#include <asm/uaccess.h>
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-static inline int user_termio_to_kernel_termios(struct ktermios *termios,
-						const struct termio __user *termio)
-{
-	unsigned short tmp;
-
-	if (get_user(tmp, &termio->c_iflag) < 0)
-		goto fault;
-	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
-
-	if (get_user(tmp, &termio->c_oflag) < 0)
-		goto fault;
-	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
-
-	if (get_user(tmp, &termio->c_cflag) < 0)
-		goto fault;
-	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
-
-	if (get_user(tmp, &termio->c_lflag) < 0)
-		goto fault;
-	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
-
-	if (get_user(termios->c_line, &termio->c_line) < 0)
-		goto fault;
-
-	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
-		goto fault;
-
-	return 0;
-
- fault:
-	return -EFAULT;
-}
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-static inline int kernel_termios_to_user_termio(struct termio __user *termio,
-						struct ktermios *termios)
-{
-	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
-	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
-	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
-	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
-	    put_user(termios->c_line,  &termio->c_line) < 0 ||
-	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
-		return -EFAULT;
-
-	return 0;
-}
-
-#ifdef TCGETS2
-static inline int user_termios_to_kernel_termios(struct ktermios *k,
-						 struct termios2 __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios2));
-}
-
-static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
-						 struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios2));
-}
-
-static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
-						   struct termios __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios));
-}
-
-static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
-						   struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios));
-}
-#else /* TCGETS2 */
-static inline int user_termios_to_kernel_termios(struct ktermios *k,
-						 struct termios __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios));
-}
-
-static inline int kernel_termios_to_user_termios(struct termios __user *u,
-						 struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios));
-}
-#endif /* TCGETS2 */
-
-#endif	/* __KERNEL__ */
-
-#endif /* _ASM_GENERIC_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index f2fe528e968..df1da20f453 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -3,7 +3,7 @@
 
 #define dma_addr_t	dma_addr_t
 
-#include <asm/generic-types.h>
+#include <asm-generic/types.h>
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/ucontext.h b/arch/x86/include/asm/ucontext.h
index 7cfc436f86d..b7c29c8017f 100644
--- a/arch/x86/include/asm/ucontext.h
+++ b/arch/x86/include/asm/ucontext.h
@@ -7,6 +7,6 @@
 				 * sigcontext struct (uc_mcontext).
 				 */
 
-#include <asm/generic-ucontext.h>
+#include <asm-generic/ucontext.h>
 
 #endif /* _ASM_X86_UCONTEXT_H */
-- 
cgit v1.2.3


From 6bc9a3966f0395419b09b2ec90f89f7f00341b37 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Fri, 12 Jun 2009 22:01:00 +0800
Subject: score: Add support for Sunplus S+core architecture

This is the complete set of new arch Score's files for linux.
Score instruction set support 16bits, 32bits and 64bits instruction,
Score SOC had been used in game machine and LCD TV.

Signed-off-by: Chen Liqin <liqin.chen@sunplusct.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/Kconfig                         | 141 ++++++
 arch/score/Kconfig.debug                   |  37 ++
 arch/score/Makefile                        |  43 ++
 arch/score/boot/Makefile                   |  15 +
 arch/score/configs/spct6600_defconfig      | 717 +++++++++++++++++++++++++++++
 arch/score/include/asm/Kbuild              |   3 +
 arch/score/include/asm/asmmacro.h          | 161 +++++++
 arch/score/include/asm/atomic.h            |   6 +
 arch/score/include/asm/auxvec.h            |   4 +
 arch/score/include/asm/bitops.h            |  16 +
 arch/score/include/asm/bitsperlong.h       |   6 +
 arch/score/include/asm/bug.h               |   6 +
 arch/score/include/asm/bugs.h              |   6 +
 arch/score/include/asm/byteorder.h         |   6 +
 arch/score/include/asm/cache.h             |   7 +
 arch/score/include/asm/cacheflush.h        |  47 ++
 arch/score/include/asm/checksum.h          | 235 ++++++++++
 arch/score/include/asm/cputime.h           |   6 +
 arch/score/include/asm/current.h           |   6 +
 arch/score/include/asm/delay.h             |  21 +
 arch/score/include/asm/device.h            |   6 +
 arch/score/include/asm/div64.h             |   6 +
 arch/score/include/asm/dma-mapping.h       |   6 +
 arch/score/include/asm/dma.h               |   8 +
 arch/score/include/asm/elf.h               |  99 ++++
 arch/score/include/asm/emergency-restart.h |   6 +
 arch/score/include/asm/errno.h             |   7 +
 arch/score/include/asm/fcntl.h             |   6 +
 arch/score/include/asm/fixmap.h            |  82 ++++
 arch/score/include/asm/ftrace.h            |   4 +
 arch/score/include/asm/futex.h             |   6 +
 arch/score/include/asm/hardirq.h           |   6 +
 arch/score/include/asm/hw_irq.h            |   4 +
 arch/score/include/asm/io.h                |   9 +
 arch/score/include/asm/ioctl.h             |   6 +
 arch/score/include/asm/ioctls.h            |   6 +
 arch/score/include/asm/ipcbuf.h            |   6 +
 arch/score/include/asm/irq.h               |  33 ++
 arch/score/include/asm/irq_regs.h          |   6 +
 arch/score/include/asm/irqflags.h          | 111 +++++
 arch/score/include/asm/kdebug.h            |   6 +
 arch/score/include/asm/kmap_types.h        |   6 +
 arch/score/include/asm/linkage.h           |   4 +
 arch/score/include/asm/local.h             |   6 +
 arch/score/include/asm/mman.h              |   6 +
 arch/score/include/asm/mmu.h               |   6 +
 arch/score/include/asm/mmu_context.h       | 113 +++++
 arch/score/include/asm/module.h            |  39 ++
 arch/score/include/asm/msgbuf.h            |   6 +
 arch/score/include/asm/mutex.h             |   6 +
 arch/score/include/asm/page.h              |  92 ++++
 arch/score/include/asm/param.h             |   6 +
 arch/score/include/asm/pci.h               |   4 +
 arch/score/include/asm/percpu.h            |   6 +
 arch/score/include/asm/pgalloc.h           |  83 ++++
 arch/score/include/asm/pgtable-bits.h      |  23 +
 arch/score/include/asm/pgtable.h           | 267 +++++++++++
 arch/score/include/asm/poll.h              |   6 +
 arch/score/include/asm/posix_types.h       |   6 +
 arch/score/include/asm/processor.h         | 106 +++++
 arch/score/include/asm/ptrace.h            |  87 ++++
 arch/score/include/asm/resource.h          |   6 +
 arch/score/include/asm/scatterlist.h       |   6 +
 arch/score/include/asm/scoreregs.h         |  51 ++
 arch/score/include/asm/sections.h          |   6 +
 arch/score/include/asm/segment.h           |  21 +
 arch/score/include/asm/sembuf.h            |   6 +
 arch/score/include/asm/setup.h             |  40 ++
 arch/score/include/asm/shmbuf.h            |   6 +
 arch/score/include/asm/shmparam.h          |   6 +
 arch/score/include/asm/sigcontext.h        |  22 +
 arch/score/include/asm/siginfo.h           |   6 +
 arch/score/include/asm/signal.h            |   6 +
 arch/score/include/asm/socket.h            |   6 +
 arch/score/include/asm/sockios.h           |   6 +
 arch/score/include/asm/stat.h              |   6 +
 arch/score/include/asm/statfs.h            |   6 +
 arch/score/include/asm/string.h            |   8 +
 arch/score/include/asm/swab.h              |   6 +
 arch/score/include/asm/syscalls.h          |   9 +
 arch/score/include/asm/system.h            |  90 ++++
 arch/score/include/asm/termbits.h          |   6 +
 arch/score/include/asm/termios.h           |   6 +
 arch/score/include/asm/thread_info.h       | 103 +++++
 arch/score/include/asm/timex.h             |   8 +
 arch/score/include/asm/tlb.h               |  17 +
 arch/score/include/asm/tlbflush.h          | 142 ++++++
 arch/score/include/asm/topology.h          |   6 +
 arch/score/include/asm/types.h             |   6 +
 arch/score/include/asm/uaccess.h           |  27 ++
 arch/score/include/asm/unaligned.h         |   6 +
 arch/score/include/asm/unistd.h            |   8 +
 arch/score/include/asm/user.h              |   4 +
 arch/score/kernel/Makefile                 |  10 +
 arch/score/kernel/asm-offsets.c            | 216 +++++++++
 arch/score/kernel/entry.S                  | 542 ++++++++++++++++++++++
 arch/score/kernel/head.S                   |  70 +++
 arch/score/kernel/init_task.c              |  49 ++
 arch/score/kernel/irq.c                    | 135 ++++++
 arch/score/kernel/module.c                 | 164 +++++++
 arch/score/kernel/process.c                | 165 +++++++
 arch/score/kernel/ptrace.c                 | 465 +++++++++++++++++++
 arch/score/kernel/setup.c                  | 157 +++++++
 arch/score/kernel/signal.c                 | 355 ++++++++++++++
 arch/score/kernel/sys_score.c              | 147 ++++++
 arch/score/kernel/time.c                   |  99 ++++
 arch/score/kernel/traps.c                  | 349 ++++++++++++++
 arch/score/kernel/vmlinux.lds.S            | 148 ++++++
 arch/score/lib/Makefile                    |   8 +
 arch/score/lib/ashldi3.c                   |  46 ++
 arch/score/lib/ashrdi3.c                   |  48 ++
 arch/score/lib/checksum.S                  | 255 ++++++++++
 arch/score/lib/checksum_copy.c             |  52 +++
 arch/score/lib/cmpdi2.c                    |  44 ++
 arch/score/lib/libgcc.h                    |  37 ++
 arch/score/lib/lshrdi3.c                   |  47 ++
 arch/score/lib/string.S                    | 196 ++++++++
 arch/score/lib/ucmpdi2.c                   |  38 ++
 arch/score/mm/Makefile                     |   6 +
 arch/score/mm/cache.c                      | 308 +++++++++++++
 arch/score/mm/extable.c                    |  38 ++
 arch/score/mm/fault.c                      | 235 ++++++++++
 arch/score/mm/init.c                       | 173 +++++++
 arch/score/mm/pgtable.c                    |  60 +++
 arch/score/mm/tlb-miss.S                   | 199 ++++++++
 arch/score/mm/tlb-score.c                  | 251 ++++++++++
 126 files changed, 8566 insertions(+)
 create mode 100644 arch/score/Kconfig
 create mode 100644 arch/score/Kconfig.debug
 create mode 100644 arch/score/Makefile
 create mode 100644 arch/score/boot/Makefile
 create mode 100644 arch/score/configs/spct6600_defconfig
 create mode 100644 arch/score/include/asm/Kbuild
 create mode 100644 arch/score/include/asm/asmmacro.h
 create mode 100644 arch/score/include/asm/atomic.h
 create mode 100644 arch/score/include/asm/auxvec.h
 create mode 100644 arch/score/include/asm/bitops.h
 create mode 100644 arch/score/include/asm/bitsperlong.h
 create mode 100644 arch/score/include/asm/bug.h
 create mode 100644 arch/score/include/asm/bugs.h
 create mode 100644 arch/score/include/asm/byteorder.h
 create mode 100644 arch/score/include/asm/cache.h
 create mode 100644 arch/score/include/asm/cacheflush.h
 create mode 100644 arch/score/include/asm/checksum.h
 create mode 100644 arch/score/include/asm/cputime.h
 create mode 100644 arch/score/include/asm/current.h
 create mode 100644 arch/score/include/asm/delay.h
 create mode 100644 arch/score/include/asm/device.h
 create mode 100644 arch/score/include/asm/div64.h
 create mode 100644 arch/score/include/asm/dma-mapping.h
 create mode 100644 arch/score/include/asm/dma.h
 create mode 100644 arch/score/include/asm/elf.h
 create mode 100644 arch/score/include/asm/emergency-restart.h
 create mode 100644 arch/score/include/asm/errno.h
 create mode 100644 arch/score/include/asm/fcntl.h
 create mode 100644 arch/score/include/asm/fixmap.h
 create mode 100644 arch/score/include/asm/ftrace.h
 create mode 100644 arch/score/include/asm/futex.h
 create mode 100644 arch/score/include/asm/hardirq.h
 create mode 100644 arch/score/include/asm/hw_irq.h
 create mode 100644 arch/score/include/asm/io.h
 create mode 100644 arch/score/include/asm/ioctl.h
 create mode 100644 arch/score/include/asm/ioctls.h
 create mode 100644 arch/score/include/asm/ipcbuf.h
 create mode 100644 arch/score/include/asm/irq.h
 create mode 100644 arch/score/include/asm/irq_regs.h
 create mode 100644 arch/score/include/asm/irqflags.h
 create mode 100644 arch/score/include/asm/kdebug.h
 create mode 100644 arch/score/include/asm/kmap_types.h
 create mode 100644 arch/score/include/asm/linkage.h
 create mode 100644 arch/score/include/asm/local.h
 create mode 100644 arch/score/include/asm/mman.h
 create mode 100644 arch/score/include/asm/mmu.h
 create mode 100644 arch/score/include/asm/mmu_context.h
 create mode 100644 arch/score/include/asm/module.h
 create mode 100644 arch/score/include/asm/msgbuf.h
 create mode 100644 arch/score/include/asm/mutex.h
 create mode 100644 arch/score/include/asm/page.h
 create mode 100644 arch/score/include/asm/param.h
 create mode 100644 arch/score/include/asm/pci.h
 create mode 100644 arch/score/include/asm/percpu.h
 create mode 100644 arch/score/include/asm/pgalloc.h
 create mode 100644 arch/score/include/asm/pgtable-bits.h
 create mode 100644 arch/score/include/asm/pgtable.h
 create mode 100644 arch/score/include/asm/poll.h
 create mode 100644 arch/score/include/asm/posix_types.h
 create mode 100644 arch/score/include/asm/processor.h
 create mode 100644 arch/score/include/asm/ptrace.h
 create mode 100644 arch/score/include/asm/resource.h
 create mode 100644 arch/score/include/asm/scatterlist.h
 create mode 100644 arch/score/include/asm/scoreregs.h
 create mode 100644 arch/score/include/asm/sections.h
 create mode 100644 arch/score/include/asm/segment.h
 create mode 100644 arch/score/include/asm/sembuf.h
 create mode 100644 arch/score/include/asm/setup.h
 create mode 100644 arch/score/include/asm/shmbuf.h
 create mode 100644 arch/score/include/asm/shmparam.h
 create mode 100644 arch/score/include/asm/sigcontext.h
 create mode 100644 arch/score/include/asm/siginfo.h
 create mode 100644 arch/score/include/asm/signal.h
 create mode 100644 arch/score/include/asm/socket.h
 create mode 100644 arch/score/include/asm/sockios.h
 create mode 100644 arch/score/include/asm/stat.h
 create mode 100644 arch/score/include/asm/statfs.h
 create mode 100644 arch/score/include/asm/string.h
 create mode 100644 arch/score/include/asm/swab.h
 create mode 100644 arch/score/include/asm/syscalls.h
 create mode 100644 arch/score/include/asm/system.h
 create mode 100644 arch/score/include/asm/termbits.h
 create mode 100644 arch/score/include/asm/termios.h
 create mode 100644 arch/score/include/asm/thread_info.h
 create mode 100644 arch/score/include/asm/timex.h
 create mode 100644 arch/score/include/asm/tlb.h
 create mode 100644 arch/score/include/asm/tlbflush.h
 create mode 100644 arch/score/include/asm/topology.h
 create mode 100644 arch/score/include/asm/types.h
 create mode 100644 arch/score/include/asm/uaccess.h
 create mode 100644 arch/score/include/asm/unaligned.h
 create mode 100644 arch/score/include/asm/unistd.h
 create mode 100644 arch/score/include/asm/user.h
 create mode 100644 arch/score/kernel/Makefile
 create mode 100644 arch/score/kernel/asm-offsets.c
 create mode 100644 arch/score/kernel/entry.S
 create mode 100644 arch/score/kernel/head.S
 create mode 100644 arch/score/kernel/init_task.c
 create mode 100644 arch/score/kernel/irq.c
 create mode 100644 arch/score/kernel/module.c
 create mode 100644 arch/score/kernel/process.c
 create mode 100644 arch/score/kernel/ptrace.c
 create mode 100644 arch/score/kernel/setup.c
 create mode 100644 arch/score/kernel/signal.c
 create mode 100644 arch/score/kernel/sys_score.c
 create mode 100644 arch/score/kernel/time.c
 create mode 100644 arch/score/kernel/traps.c
 create mode 100644 arch/score/kernel/vmlinux.lds.S
 create mode 100644 arch/score/lib/Makefile
 create mode 100644 arch/score/lib/ashldi3.c
 create mode 100644 arch/score/lib/ashrdi3.c
 create mode 100644 arch/score/lib/checksum.S
 create mode 100644 arch/score/lib/checksum_copy.c
 create mode 100644 arch/score/lib/cmpdi2.c
 create mode 100644 arch/score/lib/libgcc.h
 create mode 100644 arch/score/lib/lshrdi3.c
 create mode 100644 arch/score/lib/string.S
 create mode 100644 arch/score/lib/ucmpdi2.c
 create mode 100644 arch/score/mm/Makefile
 create mode 100644 arch/score/mm/cache.c
 create mode 100644 arch/score/mm/extable.c
 create mode 100644 arch/score/mm/fault.c
 create mode 100644 arch/score/mm/init.c
 create mode 100644 arch/score/mm/pgtable.c
 create mode 100644 arch/score/mm/tlb-miss.S
 create mode 100644 arch/score/mm/tlb-score.c

(limited to 'arch')

diff --git a/arch/score/Kconfig b/arch/score/Kconfig
new file mode 100644
index 00000000000..55d413e6dcf
--- /dev/null
+++ b/arch/score/Kconfig
@@ -0,0 +1,141 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+mainmenu "Linux/SCORE Kernel Configuration"
+
+menu "Machine selection"
+
+choice
+	prompt "System type"
+	default MACH_SPCT6600
+
+config ARCH_SCORE7
+	bool "SCORE7 processor"
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select CPU_SCORE7
+	select GENERIC_HAS_IOMAP
+
+config MACH_SPCT6600
+	bool "SPCT6600 series based machines"
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select CPU_SCORE7
+	select GENERIC_HAS_IOMAP
+
+config SCORE_SIM
+	bool "Score simulator"
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select CPU_SCORE7
+	select GENERIC_HAS_IOMAP
+endchoice
+
+endmenu
+
+config CPU_SCORE7
+	bool
+
+config GENERIC_IOMAP
+	def_bool y
+
+config NO_DMA
+	bool
+	default y
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
+config GENERIC_TIME
+	def_bool y
+
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+	def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
+config GENERIC_SYSCALL_TABLE
+	def_bool y
+
+config SCORE_L1_CACHE_SHIFT
+	int
+	default "4"
+
+menu "Kernel type"
+
+config 32BIT
+	def_bool y
+
+config GENERIC_HARDIRQS
+	def_bool y
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config ARCH_POPULATES_NODE_MAP
+	def_bool y
+
+source "mm/Kconfig"
+
+config MEMORY_START
+	hex
+	default	0xa0000000
+
+source "kernel/time/Kconfig"
+source "kernel/Kconfig.hz"
+source "kernel/Kconfig.preempt"
+
+endmenu
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+source "init/Kconfig"
+
+config PROBE_INITRD_HEADER
+	bool "Probe initrd header created by addinitrd"
+	depends on BLK_DEV_INITRD
+	help
+	  Probe initrd header at the last page of kernel image.
+	  Say Y here if you are using arch/score/boot/addinitrd.c to
+	  add initrd or initramfs image to the kernel image.
+	  Otherwise, say N.
+
+config MMU
+	def_bool y
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/score/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/score/Kconfig.debug b/arch/score/Kconfig.debug
new file mode 100644
index 00000000000..451ed54ce64
--- /dev/null
+++ b/arch/score/Kconfig.debug
@@ -0,0 +1,37 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
+source "lib/Kconfig.debug"
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  On some platforms, there is currently no way for the boot loader to
+	  pass arguments to the kernel. For these platforms, you can supply
+	  some command-line options at build time by entering them here.  In
+	  other cases you can specify kernel args so that you don't have
+	  to set them up in board prom initialization routines.
+
+config DEBUG_STACK_USAGE
+	bool "Enable stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config RUNTIME_DEBUG
+	bool "Enable run-time debugging"
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here, some debugging macros will do run-time checking.
+	  If you say N here, those macros will mostly turn to no-ops.  See
+	  include/asm-score/debug.h for debuging macros.
+	  If unsure, say N.
+
+endmenu
diff --git a/arch/score/Makefile b/arch/score/Makefile
new file mode 100644
index 00000000000..68e0cd06d5c
--- /dev/null
+++ b/arch/score/Makefile
@@ -0,0 +1,43 @@
+#
+# arch/score/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+KBUILD_DEFCONFIG := spct6600_defconfig
+CROSS_COMPILE := score-linux-
+
+#
+# CPU-dependent compiler/assembler options for optimization.
+#
+cflags-y += -G0 -pipe -mel -mnhwloop -D__SCOREEL__ \
+	-D__linux__ -ffunction-sections -ffreestanding
+
+#
+# Board-dependent options and extra files
+#
+KBUILD_AFLAGS += $(cflags-y)
+KBUILD_CFLAGS += $(cflags-y)
+MODFLAGS += -mlong-calls
+LDFLAGS += --oformat elf32-littlescore
+LDFLAGS_vmlinux	+= -G0 -static -nostdlib
+
+head-y := arch/score/kernel/head.o
+libs-y += arch/score/lib/
+core-y += arch/score/kernel/ arch/score/mm/
+
+boot := arch/score/boot
+
+vmlinux.bin: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+archclean:
+	@$(MAKE) $(clean)=$(boot)
+
+define archhelp
+	echo '  vmlinux.bin          - Raw binary boot image'
+	echo
+	echo '  These will be default as apropriate for a configured platform.'
+endef
diff --git a/arch/score/boot/Makefile b/arch/score/boot/Makefile
new file mode 100644
index 00000000000..0c5fbd0fb69
--- /dev/null
+++ b/arch/score/boot/Makefile
@@ -0,0 +1,15 @@
+#
+# arch/score/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+targets	:= vmlinux.bin
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+clean-files += vmlinux.bin
diff --git a/arch/score/configs/spct6600_defconfig b/arch/score/configs/spct6600_defconfig
new file mode 100644
index 00000000000..e064943b13d
--- /dev/null
+++ b/arch/score/configs/spct6600_defconfig
@@ -0,0 +1,717 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Fri Jun 12 18:57:07 2009
+#
+
+#
+# Machine selection
+#
+# CONFIG_ARCH_SCORE7 is not set
+CONFIG_MACH_SPCT6600=y
+# CONFIG_SCORE_SIM is not set
+CONFIG_CPU_SCORE7=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_SYSCALL_TABLE=y
+CONFIG_SCORE_L1_CACHE_SHIFT=4
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_MEMORY_START=0xa0000000
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=12
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PROBE_INITRD_HEADER is not set
+CONFIG_MMU=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+CONFIG_STALDRV=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_NLATTR=y
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
new file mode 100644
index 00000000000..b367abd4620
--- /dev/null
+++ b/arch/score/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y +=
diff --git a/arch/score/include/asm/asmmacro.h b/arch/score/include/asm/asmmacro.h
new file mode 100644
index 00000000000..a04a54cea25
--- /dev/null
+++ b/arch/score/include/asm/asmmacro.h
@@ -0,0 +1,161 @@
+#ifndef _ASM_SCORE_ASMMACRO_H
+#define _ASM_SCORE_ASMMACRO_H
+
+#include <asm/asm-offsets.h>
+
+#ifdef __ASSEMBLY__
+
+.macro	SAVE_ALL
+	mfcr	r30, cr0
+	mv	r31, r0
+	nop
+	/* if UMs == 1, change stack. */
+	slli.c	r30, r30, 28
+	bpl	1f
+	la	r31, kernelsp
+	lw	r31, [r31]
+1:
+	mv	r30, r0
+	addri	r0, r31, -PT_SIZE
+
+	sw	r30, [r0, PT_R0]
+	.set	r1
+	sw	r1, [r0, PT_R1]
+	.set	nor1
+	sw	r2, [r0, PT_R2]
+	sw	r3, [r0, PT_R3]
+	sw	r4, [r0, PT_R4]
+	sw	r5, [r0, PT_R5]
+	sw	r6, [r0, PT_R6]
+	sw	r7, [r0, PT_R7]
+
+	sw	r8, [r0, PT_R8]
+	sw	r9, [r0, PT_R9]
+	sw	r10, [r0, PT_R10]
+	sw	r11, [r0, PT_R11]
+	sw	r12, [r0, PT_R12]
+	sw	r13, [r0, PT_R13]
+	sw	r14, [r0, PT_R14]
+	sw	r15, [r0, PT_R15]
+
+	sw	r16, [r0, PT_R16]
+	sw	r17, [r0, PT_R17]
+	sw	r18, [r0, PT_R18]
+	sw	r19, [r0, PT_R19]
+	sw	r20, [r0, PT_R20]
+	sw	r21, [r0, PT_R21]
+	sw	r22, [r0, PT_R22]
+	sw	r23, [r0, PT_R23]
+
+	sw	r24, [r0, PT_R24]
+	sw	r25, [r0, PT_R25]
+	sw	r25, [r0, PT_R25]
+	sw	r26, [r0, PT_R26]
+	sw	r27, [r0, PT_R27]
+
+	sw	r28, [r0, PT_R28]
+	sw	r29, [r0, PT_R29]
+	orri	r28, r0, 0x1fff
+	li	r31, 0x00001fff
+	xor	r28, r28, r31
+
+	mfcehl	r30, r31
+	sw	r30, [r0, PT_CEH]
+	sw	r31, [r0, PT_CEL]
+
+	mfcr	r31, cr0
+	sw	r31, [r0, PT_PSR]
+
+	mfcr	r31, cr1
+	sw	r31, [r0, PT_CONDITION]
+
+	mfcr	r31, cr2
+	sw	r31, [r0, PT_ECR]
+	
+	mfcr	r31, cr5
+	srli	r31, r31, 1
+	slli	r31, r31, 1
+	sw	r31, [r0, PT_EPC]
+.endm
+
+.macro	RESTORE_ALL_AND_RET
+	mfcr	r30, cr0
+	srli	r30, r30, 1
+	slli	r30, r30, 1
+	mtcr	r30, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	.set	r1
+	ldis	r1, 0x00ff
+	and	r30, r30, r1
+	not	r1, r1
+	lw	r31, [r0, PT_PSR]
+	and	r31, r31, r1
+	.set	nor1
+	or	r31, r31, r30
+	mtcr	r31, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	lw	r30, [r0, PT_CONDITION]
+	mtcr	r30, cr1
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	lw	r30, [r0, PT_CEH]
+	lw	r31, [r0, PT_CEL]
+	mtcehl	r30, r31
+
+	.set	r1
+	lw	r1, [r0, PT_R1]
+	.set	nor1
+	lw	r2, [r0, PT_R2]
+	lw	r3, [r0, PT_R3]
+	lw	r4, [r0, PT_R4]
+	lw	r5, [r0, PT_R5]
+	lw	r6, [r0, PT_R6]
+	lw	r7, [r0, PT_R7]
+
+	lw	r8, [r0, PT_R8]
+	lw	r9, [r0, PT_R9]
+	lw	r10, [r0, PT_R10]
+	lw	r11, [r0, PT_R11]
+	lw	r12, [r0, PT_R12]
+	lw	r13, [r0, PT_R13]
+	lw	r14, [r0, PT_R14]
+	lw	r15, [r0, PT_R15]
+
+	lw	r16, [r0, PT_R16]
+	lw	r17, [r0, PT_R17]
+	lw	r18, [r0, PT_R18]
+	lw	r19, [r0, PT_R19]
+	lw	r20, [r0, PT_R20]
+	lw	r21, [r0, PT_R21]
+	lw	r22, [r0, PT_R22]
+	lw	r23, [r0, PT_R23]
+
+	lw	r24, [r0, PT_R24]
+	lw	r25, [r0, PT_R25]
+	lw	r26, [r0, PT_R26]
+	lw	r27, [r0, PT_R27]
+	lw	r28, [r0, PT_R28]
+	lw	r29, [r0, PT_R29]
+
+	lw	r30, [r0, PT_EPC]
+	lw	r0, [r0, PT_R0]
+	mtcr	r30, cr5
+	rte
+.endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_SCORE_ASMMACRO_H */
diff --git a/arch/score/include/asm/atomic.h b/arch/score/include/asm/atomic.h
new file mode 100644
index 00000000000..84eb8ddf9f3
--- /dev/null
+++ b/arch/score/include/asm/atomic.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_ATOMIC_H
+#define _ASM_SCORE_ATOMIC_H
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_SCORE_ATOMIC_H */
diff --git a/arch/score/include/asm/auxvec.h b/arch/score/include/asm/auxvec.h
new file mode 100644
index 00000000000..f69151565ae
--- /dev/null
+++ b/arch/score/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_AUXVEC_H
+#define _ASM_SCORE_AUXVEC_H
+
+#endif /* _ASM_SCORE_AUXVEC_H */
diff --git a/arch/score/include/asm/bitops.h b/arch/score/include/asm/bitops.h
new file mode 100644
index 00000000000..2763b050fca
--- /dev/null
+++ b/arch/score/include/asm/bitops.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_SCORE_BITOPS_H
+#define _ASM_SCORE_BITOPS_H
+
+#include <asm/byteorder.h> /* swab32 */
+#include <asm/system.h> /* save_flags */
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+#include <asm-generic/bitops.h>
+#include <asm-generic/bitops/__fls.h>
+
+#endif /* _ASM_SCORE_BITOPS_H */
diff --git a/arch/score/include/asm/bitsperlong.h b/arch/score/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..86ff337aa45
--- /dev/null
+++ b/arch/score/include/asm/bitsperlong.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BITSPERLONG_H
+#define _ASM_SCORE_BITSPERLONG_H
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* _ASM_SCORE_BITSPERLONG_H */
diff --git a/arch/score/include/asm/bug.h b/arch/score/include/asm/bug.h
new file mode 100644
index 00000000000..bb76a330bcf
--- /dev/null
+++ b/arch/score/include/asm/bug.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BUG_H
+#define _ASM_SCORE_BUG_H
+
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_SCORE_BUG_H */
diff --git a/arch/score/include/asm/bugs.h b/arch/score/include/asm/bugs.h
new file mode 100644
index 00000000000..a062e1056bb
--- /dev/null
+++ b/arch/score/include/asm/bugs.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BUGS_H
+#define _ASM_SCORE_BUGS_H
+
+#include <asm-generic/bugs.h>
+
+#endif /* _ASM_SCORE_BUGS_H */
diff --git a/arch/score/include/asm/byteorder.h b/arch/score/include/asm/byteorder.h
new file mode 100644
index 00000000000..88cbebc7921
--- /dev/null
+++ b/arch/score/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_BYTEORDER_H
+#define _ASM_SCORE_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_SCORE_BYTEORDER_H */
diff --git a/arch/score/include/asm/cache.h b/arch/score/include/asm/cache.h
new file mode 100644
index 00000000000..ae3d59f2d2c
--- /dev/null
+++ b/arch/score/include/asm/cache.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SCORE_CACHE_H
+#define _ASM_SCORE_CACHE_H
+
+#define L1_CACHE_SHIFT		4
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif /* _ASM_SCORE_CACHE_H */
diff --git a/arch/score/include/asm/cacheflush.h b/arch/score/include/asm/cacheflush.h
new file mode 100644
index 00000000000..1c74628caf7
--- /dev/null
+++ b/arch/score/include/asm/cacheflush.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_SCORE_CACHEFLUSH_H
+#define _ASM_SCORE_CACHEFLUSH_H
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+
+extern void (*flush_cache_all)(void);
+extern void (*flush_cache_mm)(struct mm_struct *mm);
+extern void (*flush_cache_range)(struct vm_area_struct *vma,
+				unsigned long start, unsigned long end);
+extern void (*flush_cache_page)(struct vm_area_struct *vma,
+				unsigned long page, unsigned long pfn);
+extern void (*flush_cache_sigtramp)(unsigned long addr);
+extern void (*flush_icache_all)(void);
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*flush_data_cache_page)(unsigned long addr);
+
+extern void s7_flush_cache_all(void);
+
+#define flush_cache_dup_mm(mm)			do {} while (0)
+#define flush_dcache_page(page)			do {} while (0)
+#define flush_dcache_mmap_lock(mapping)		do {} while (0)
+#define flush_dcache_mmap_unlock(mapping)	do {} while (0)
+#define flush_cache_vmap(start, end)		do {} while (0)
+#define flush_cache_vunmap(start, end)		do {} while (0)
+
+static inline void flush_icache_page(struct vm_area_struct *vma,
+	struct page *page)
+{
+	if (vma->vm_flags & VM_EXEC) {
+		void *v = page_address(page);
+		flush_icache_range((unsigned long) v,
+				(unsigned long) v + PAGE_SIZE);
+	}
+}
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		memcpy(dst, src, len);				\
+		if ((vma->vm_flags & VM_EXEC))			\
+			flush_cache_page(vma, vaddr, page_to_pfn(page));\
+	} while (0)
+
+#endif /* _ASM_SCORE_CACHEFLUSH_H */
diff --git a/arch/score/include/asm/checksum.h b/arch/score/include/asm/checksum.h
new file mode 100644
index 00000000000..f909ac3144a
--- /dev/null
+++ b/arch/score/include/asm/checksum.h
@@ -0,0 +1,235 @@
+#ifndef _ASM_SCORE_CHECKSUM_H
+#define _ASM_SCORE_CHECKSUM_H
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const void *buff, int len, __wsum sum);
+unsigned int csum_partial_copy_from_user(const char *src, char *dst, int len,
+					unsigned int sum, int *csum_err);
+unsigned int csum_partial_copy(const char *src, char *dst,
+					int len, unsigned int sum);
+
+/*
+ * this is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros the rest of the buffer.
+ */
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline
+__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
+			__wsum sum, int *err_ptr)
+{
+	sum = csum_partial(src, len, sum);
+	if (copy_to_user(dst, src, len)) {
+		*err_ptr = -EFAULT;
+		return (__force __wsum) -1; /* invalid checksum */
+	}
+	return sum;
+}
+
+
+#define csum_partial_copy_nocheck csum_partial_copy
+/*
+ *	Fold a partial checksum without adding pseudo headers
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	/* the while loop is unnecessary really, it's always enough with two
+	   iterations */
+	__asm__ __volatile__(
+		".set volatile\n\t"
+		".set\tr1\n\t"
+		"slli\tr1,%0, 16\n\t"
+		"add\t%0,%0, r1\n\t"
+		"cmp.c\tr1, %0\n\t"
+		"srli\t%0, %0, 16\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:ldi\tr30, 0xffff\n\t"
+		"xor\t%0, %0, r30\n\t"
+		"slli\t%0, %0, 16\n\t"
+		"srli\t%0, %0, 16\n\t"
+		".set\tnor1\n\t"
+		".set optimize\n\t"
+		: "=r" (sum)
+		: "0" (sum));
+	return sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *	By Jorge Cwik <jorge@laser.satlink.net>, adapted for linux by
+ *	Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum;
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+		".set volatile\n\t"
+		".set\tnor1\n\t"
+		"lw\t%0, [%1]\n\t"
+		"subri\t%2, %2, 4\n\t"
+		"slli\t%2, %2, 2\n\t"
+		"lw\t%3, [%1, 4]\n\t"
+		"add\t%2, %2, %1\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"lw\t%3, [%1, 8]\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"lw\t%3, [%1, 12]\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n"
+
+		"1:\tlw\t%3, [%1, 16]\n\t"
+		"addi\t%1, 4\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"bleu\t2f\n\t"
+		"addi\t%0, 0x1\n"
+		"2:cmp.c\t%2, %1\n\t"
+		"bne\t1b\n\t"
+
+		".set\tr1\n\t"
+		".set optimize\n\t"
+		: "=&r" (sum), "=&r" (iph), "=&r" (ihl), "=&r" (dummy)
+		: "1" (iph), "2" (ihl));
+
+	return csum_fold(sum);
+}
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		unsigned short proto, __wsum sum)
+{
+	unsigned long tmp = (ntohs(len) << 16) + proto * 256;
+	__asm__ __volatile__(
+		".set volatile\n\t"
+		"add\t%0, %0, %2\n\t"
+		"cmp.c\t%2, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		"add\t%0, %0, %3\n\t"
+		"cmp.c\t%3, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		"add\t%0, %0, %4\n\t"
+		"cmp.c\t%4, %0\n\t"
+		"bleu\t1f\n\t"
+		"addi\t%0, 0x1\n\t"
+		"1:\n\t"
+		".set optimize\n\t"
+		: "=r" (sum)
+		: "0" (daddr), "r"(saddr),
+		"r" (tmp),
+		"r" (sum));
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline unsigned short ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				const struct in6_addr *daddr,
+				__u32 len, unsigned short proto,
+				__wsum sum)
+{
+	__asm__ __volatile__(
+		".set\tnoreorder\t\t\t# csum_ipv6_magic\n\t"
+		".set\tnoat\n\t"
+		"addu\t%0, %5\t\t\t# proto (long in network byte order)\n\t"
+		"sltu\t$1, %0, %5\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %6\t\t\t# csum\n\t"
+		"sltu\t$1, %0, %6\n\t"
+		"lw\t%1, 0(%2)\t\t\t# four words source address\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 4(%2)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 8(%2)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 12(%2)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 0(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 4(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 8(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"lw\t%1, 12(%3)\n\t"
+		"addu\t%0, $1\n\t"
+		"addu\t%0, %1\n\t"
+		"sltu\t$1, %0, %1\n\t"
+		"addu\t%0, $1\t\t\t# Add final carry\n\t"
+		".set\tnoat\n\t"
+		".set\tnoreorder"
+		: "=r" (sum), "=r" (proto)
+		: "r" (saddr), "r" (daddr),
+		  "0" (htonl(len)), "1" (htonl(proto)), "r" (sum));
+
+	return csum_fold(sum);
+}
+#endif /* _ASM_SCORE_CHECKSUM_H */
diff --git a/arch/score/include/asm/cputime.h b/arch/score/include/asm/cputime.h
new file mode 100644
index 00000000000..1fced99f0d6
--- /dev/null
+++ b/arch/score/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_CPUTIME_H
+#define _ASM_SCORE_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_SCORE_CPUTIME_H */
diff --git a/arch/score/include/asm/current.h b/arch/score/include/asm/current.h
new file mode 100644
index 00000000000..16eae9cbaf1
--- /dev/null
+++ b/arch/score/include/asm/current.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_CURRENT_H
+#define _ASM_SCORE_CURRENT_H
+
+#include <asm-generic/current.h>
+
+#endif /* _ASM_SCORE_CURRENT_H */
diff --git a/arch/score/include/asm/delay.h b/arch/score/include/asm/delay.h
new file mode 100644
index 00000000000..ad716f6d922
--- /dev/null
+++ b/arch/score/include/asm/delay.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SCORE_DELAY_H
+#define _ASM_SCORE_DELAY_H
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__ (
+		"1:\tsubi\t%0,1\n\t"
+		"cmpz.c\t%0\n\t"
+		"bne\t1b\n\t"
+		: "=r" (loops)
+		: "0" (loops));
+}
+
+static inline void __udelay(unsigned long usecs)
+{
+	__delay(usecs);
+}
+
+#define udelay(usecs) __udelay(usecs)
+
+#endif /* _ASM_SCORE_DELAY_H */
diff --git a/arch/score/include/asm/device.h b/arch/score/include/asm/device.h
new file mode 100644
index 00000000000..2dc7cc5d5ef
--- /dev/null
+++ b/arch/score/include/asm/device.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_DEVICE_H
+#define _ASM_SCORE_DEVICE_H
+
+#include <asm-generic/device.h>
+
+#endif /* _ASM_SCORE_DEVICE_H */
diff --git a/arch/score/include/asm/div64.h b/arch/score/include/asm/div64.h
new file mode 100644
index 00000000000..75fae19824e
--- /dev/null
+++ b/arch/score/include/asm/div64.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_DIV64_H
+#define _ASM_SCORE_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* _ASM_SCORE_DIV64_H */
diff --git a/arch/score/include/asm/dma-mapping.h b/arch/score/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..f9c0193c7a5
--- /dev/null
+++ b/arch/score/include/asm/dma-mapping.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_DMA_MAPPING_H
+#define _ASM_SCORE_DMA_MAPPING_H
+
+#include <asm-generic/dma-mapping-broken.h>
+
+#endif /* _ASM_SCORE_DMA_MAPPING_H */
diff --git a/arch/score/include/asm/dma.h b/arch/score/include/asm/dma.h
new file mode 100644
index 00000000000..9f44185298b
--- /dev/null
+++ b/arch/score/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SCORE_DMA_H
+#define _ASM_SCORE_DMA_H
+
+#include <asm/io.h>
+
+#define MAX_DMA_ADDRESS		(0)
+
+#endif /* _ASM_SCORE_DMA_H */
diff --git a/arch/score/include/asm/elf.h b/arch/score/include/asm/elf.h
new file mode 100644
index 00000000000..832436375ac
--- /dev/null
+++ b/arch/score/include/asm/elf.h
@@ -0,0 +1,99 @@
+#ifndef _ASM_SCORE_ELF_H
+#define _ASM_SCORE_ELF_H
+
+/* ELF register definitions */
+#define ELF_NGREG	45
+#define ELF_NFPREG	33
+#define EM_SCORE7	135
+
+/* Relocation types. */
+#define R_SCORE_NONE		0
+#define R_SCORE_HI16		1
+#define R_SCORE_LO16		2
+#define R_SCORE_BCMP		3
+#define R_SCORE_24		4
+#define R_SCORE_PC19		5
+#define R_SCORE16_11		6
+#define R_SCORE16_PC8		7
+#define R_SCORE_ABS32		8
+#define R_SCORE_ABS16		9
+#define R_SCORE_DUMMY2		10
+#define R_SCORE_GP15		11
+#define R_SCORE_GNU_VTINHERIT	12
+#define R_SCORE_GNU_VTENTRY	13
+#define R_SCORE_GOT15		14
+#define R_SCORE_GOT_LO16	15
+#define R_SCORE_CALL15		16
+#define R_SCORE_GPREL32		17
+#define R_SCORE_REL32		18
+#define R_SCORE_DUMMY_HI16	19
+#define R_SCORE_IMM30		20
+#define R_SCORE_IMM32		21
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#define elf_check_arch(x)	((x)->e_machine == EM_SCORE7)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_SCORE7
+
+#define SET_PERSONALITY(ex)					\
+do {								\
+	set_personality(PER_LINUX);				\
+} while (0)
+
+struct task_struct;
+struct pt_regs;
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(NULL)
+
+#define ELF_PLAT_INIT(_r, load_addr)					\
+do {									\
+	_r->regs[1] = _r->regs[2] = _r->regs[3] = _r->regs[4] = 0;	\
+	_r->regs[5] = _r->regs[6] = _r->regs[7] = _r->regs[8] = 0;	\
+	_r->regs[9] = _r->regs[10] = _r->regs[11] = _r->regs[12] = 0;	\
+	_r->regs[13] = _r->regs[14] = _r->regs[15] = _r->regs[16] = 0;	\
+	_r->regs[17] = _r->regs[18] = _r->regs[19] = _r->regs[20] = 0;	\
+	_r->regs[21] = _r->regs[22] = _r->regs[23] = _r->regs[24] = 0;	\
+	_r->regs[25] = _r->regs[26] = _r->regs[27] = _r->regs[28] = 0;	\
+	_r->regs[30] = _r->regs[31] = 0;				\
+} while (0)
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef ELF_ET_DYN_BASE
+#define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
+#endif
+
+#endif /* _ASM_SCORE_ELF_H */
diff --git a/arch/score/include/asm/emergency-restart.h b/arch/score/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..ca31e9803a8
--- /dev/null
+++ b/arch/score/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_EMERGENCY_RESTART_H
+#define _ASM_SCORE_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_SCORE_EMERGENCY_RESTART_H */
diff --git a/arch/score/include/asm/errno.h b/arch/score/include/asm/errno.h
new file mode 100644
index 00000000000..7cd3e1f07c0
--- /dev/null
+++ b/arch/score/include/asm/errno.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SCORE_ERRNO_H
+#define _ASM_SCORE_ERRNO_H
+
+#include <asm-generic/errno.h>
+#define EMAXERRNO 1024
+
+#endif /* _ASM_SCORE_ERRNO_H */
diff --git a/arch/score/include/asm/fcntl.h b/arch/score/include/asm/fcntl.h
new file mode 100644
index 00000000000..03968a3103a
--- /dev/null
+++ b/arch/score/include/asm/fcntl.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_FCNTL_H
+#define _ASM_SCORE_FCNTL_H
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_SCORE_FCNTL_H */
diff --git a/arch/score/include/asm/fixmap.h b/arch/score/include/asm/fixmap.h
new file mode 100644
index 00000000000..ee167669402
--- /dev/null
+++ b/arch/score/include/asm/fixmap.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_SCORE_FIXMAP_H
+#define _ASM_SCORE_FIXMAP_H
+
+#include <asm/page.h>
+
+#define PHY_RAM_BASE		0x00000000
+#define PHY_IO_BASE		0x10000000
+
+#define VIRTUAL_RAM_BASE	0xa0000000
+#define VIRTUAL_IO_BASE		0xb0000000
+
+#define RAM_SPACE_SIZE		0x10000000
+#define IO_SPACE_SIZE		0x10000000
+
+/* Kernel unmapped, cached 512MB */
+#define KSEG1			0xa0000000
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#define FIX_N_COLOURS 8
+	FIX_CMAP_BEGIN,
+	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+	__end_of_fixed_addresses
+};
+
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#define FIXADDR_TOP	((unsigned long)(long)(int)0xfefe0000)
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	\
+	((FIXADDR_TOP - ((x) & PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	return __virt_to_fix(vaddr);
+}
+
+#endif /* _ASM_SCORE_FIXMAP_H */
diff --git a/arch/score/include/asm/ftrace.h b/arch/score/include/asm/ftrace.h
new file mode 100644
index 00000000000..79d6f10e1f5
--- /dev/null
+++ b/arch/score/include/asm/ftrace.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_FTRACE_H
+#define _ASM_SCORE_FTRACE_H
+
+#endif /* _ASM_SCORE_FTRACE_H */
diff --git a/arch/score/include/asm/futex.h b/arch/score/include/asm/futex.h
new file mode 100644
index 00000000000..1dca2420f8d
--- /dev/null
+++ b/arch/score/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_FUTEX_H
+#define _ASM_SCORE_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif /* _ASM_SCORE_FUTEX_H */
diff --git a/arch/score/include/asm/hardirq.h b/arch/score/include/asm/hardirq.h
new file mode 100644
index 00000000000..dc932c50d3e
--- /dev/null
+++ b/arch/score/include/asm/hardirq.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_HARDIRQ_H
+#define _ASM_SCORE_HARDIRQ_H
+
+#include <asm-generic/hardirq.h>
+
+#endif /* _ASM_SCORE_HARDIRQ_H */
diff --git a/arch/score/include/asm/hw_irq.h b/arch/score/include/asm/hw_irq.h
new file mode 100644
index 00000000000..4caafb2b509
--- /dev/null
+++ b/arch/score/include/asm/hw_irq.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_HW_IRQ_H
+#define _ASM_SCORE_HW_IRQ_H
+
+#endif /* _ASM_SCORE_HW_IRQ_H */
diff --git a/arch/score/include/asm/io.h b/arch/score/include/asm/io.h
new file mode 100644
index 00000000000..fbbfd7132e3
--- /dev/null
+++ b/arch/score/include/asm/io.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_SCORE_IO_H
+#define _ASM_SCORE_IO_H
+
+#include <asm-generic/io.h>
+
+#define virt_to_bus	virt_to_phys
+#define bus_to_virt	phys_to_virt
+
+#endif /* _ASM_SCORE_IO_H */
diff --git a/arch/score/include/asm/ioctl.h b/arch/score/include/asm/ioctl.h
new file mode 100644
index 00000000000..a351d2194bf
--- /dev/null
+++ b/arch/score/include/asm/ioctl.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_IOCTL_H
+#define _ASM_SCORE_IOCTL_H
+
+#include <asm-generic/ioctl.h>
+
+#endif /* _ASM_SCORE_IOCTL_H */
diff --git a/arch/score/include/asm/ioctls.h b/arch/score/include/asm/ioctls.h
new file mode 100644
index 00000000000..ed01d2b9aea
--- /dev/null
+++ b/arch/score/include/asm/ioctls.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_IOCTLS_H
+#define _ASM_SCORE_IOCTLS_H
+
+#include <asm-generic/ioctls.h>
+
+#endif /* _ASM_SCORE_IOCTLS_H */
diff --git a/arch/score/include/asm/ipcbuf.h b/arch/score/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..e082ceff181
--- /dev/null
+++ b/arch/score/include/asm/ipcbuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_IPCBUF_H
+#define _ASM_SCORE_IPCBUF_H
+
+#include <asm-generic/ipcbuf.h>
+
+#endif /* _ASM_SCORE_IPCBUF_H */
diff --git a/arch/score/include/asm/irq.h b/arch/score/include/asm/irq.h
new file mode 100644
index 00000000000..401f6704848
--- /dev/null
+++ b/arch/score/include/asm/irq.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_SCORE_IRQ_H
+#define _ASM_SCORE_IRQ_H
+
+#define EXCEPTION_VECTOR_BASE_ADDR	0xa0000000
+#define VECTOR_ADDRESS_OFFSET_MODE4	0
+#define VECTOR_ADDRESS_OFFSET_MODE16	1
+
+#define DEBUG_VECTOR_SIZE		(0x4)
+#define DEBUG_VECTOR_BASE_ADDR		((EXCEPTION_VECTOR_BASE_ADDR) + 0x1fc)
+
+#define GENERAL_VECTOR_SIZE		(0x10)
+#define GENERAL_VECTOR_BASE_ADDR	((EXCEPTION_VECTOR_BASE_ADDR) + 0x200)
+
+#define NR_IRQS				64
+#define IRQ_VECTOR_SIZE			(0x10)
+#define IRQ_VECTOR_BASE_ADDR		((EXCEPTION_VECTOR_BASE_ADDR) + 0x210)
+#define IRQ_VECTOR_END_ADDR		((EXCEPTION_VECTOR_BASE_ADDR) + 0x5f0)
+
+#define irq_canonicalize(irq)	(irq)
+
+#define P_INT_PNDL		0x95F50000
+#define P_INT_PNDH		0x95F50004
+#define P_INT_PRIORITY_M	0x95F50008
+#define P_INT_PRIORITY_SG0	0x95F50010
+#define P_INT_PRIORITY_SG1	0x95F50014
+#define P_INT_PRIORITY_SG2	0x95F50018
+#define P_INT_PRIORITY_SG3	0x95F5001C
+#define P_INT_MASKL		0x95F50020
+#define P_INT_MASKH		0x95F50024
+
+#define IRQ_TIMER (7)		/* Timer IRQ number of SPCT6600 */
+
+#endif /* _ASM_SCORE_IRQ_H */
diff --git a/arch/score/include/asm/irq_regs.h b/arch/score/include/asm/irq_regs.h
new file mode 100644
index 00000000000..905b7b078ba
--- /dev/null
+++ b/arch/score/include/asm/irq_regs.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_IRQ_REGS_H
+#define _ASM_SCORE_IRQ_REGS_H
+
+#include <asm-generic/irq_regs.h>
+
+#endif /* _ASM_SCORE_IRQ_REGS_H */
diff --git a/arch/score/include/asm/irqflags.h b/arch/score/include/asm/irqflags.h
new file mode 100644
index 00000000000..92eeb33dd72
--- /dev/null
+++ b/arch/score/include/asm/irqflags.h
@@ -0,0 +1,111 @@
+#ifndef _ASM_SCORE_IRQFLAGS_H
+#define _ASM_SCORE_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+#define raw_local_irq_save(x)			\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr	r8, cr0;"		\
+		"li	r9, 0xfffffffe;"	\
+		"nop;"				\
+		"mv	%0, r8;"		\
+		"and	r8, r8, r9;"		\
+		"mtcr	r8, cr0;"		\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"ldi	r9, 0x1;"		\
+		"and	%0, %0, r9;"		\
+		: "=r" (x)			\
+		:				\
+		: "r8", "r9"			\
+		);				\
+}
+
+#define raw_local_irq_restore(x)		\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr	r8, cr0;"		\
+		"ldi	r9, 0x1;"		\
+		"and	%0, %0, r9;"		\
+		"or	r8, r8, %0;"		\
+		"mtcr	r8, cr0;"		\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		:				\
+		: "r"(x)			\
+		: "r8", "r9"			\
+		);				\
+}
+
+#define raw_local_irq_enable(void)		\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"ori\tr8,0x1;"			\
+		"mtcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		:				\
+		:				\
+		: "r8");			\
+}
+
+#define raw_local_irq_disable(void)		\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"srli\tr8,r8,1;"		\
+		"slli\tr8,r8,1;"		\
+		"mtcr\tr8,cr0;"			\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		:				\
+		:				\
+		: "r8");			\
+}
+
+#define raw_local_save_flags(x)			\
+{						\
+	__asm__ __volatile__(			\
+		"mfcr	r8, cr0;"		\
+		"nop;"				\
+		"nop;"				\
+		"mv	%0, r8;"		\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"nop;"				\
+		"ldi	r9, 0x1;"		\
+		"and	%0, %0, r9;"		\
+		: "=r" (x)			\
+		:				\
+		: "r8", "r9"			\
+		);				\
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & 1);
+}
+
+#endif
+
+#endif /* _ASM_SCORE_IRQFLAGS_H */
diff --git a/arch/score/include/asm/kdebug.h b/arch/score/include/asm/kdebug.h
new file mode 100644
index 00000000000..a666e513f74
--- /dev/null
+++ b/arch/score/include/asm/kdebug.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_KDEBUG_H
+#define _ASM_SCORE_KDEBUG_H
+
+#include <asm-generic/kdebug.h>
+
+#endif /* _ASM_SCORE_KDEBUG_H */
diff --git a/arch/score/include/asm/kmap_types.h b/arch/score/include/asm/kmap_types.h
new file mode 100644
index 00000000000..6c46eb5077d
--- /dev/null
+++ b/arch/score/include/asm/kmap_types.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_KMAP_TYPES_H
+#define _ASM_SCORE_KMAP_TYPES_H
+
+#include <asm-generic/kmap_types.h>
+
+#endif /* _ASM_SCORE_KMAP_TYPES_H */
diff --git a/arch/score/include/asm/linkage.h b/arch/score/include/asm/linkage.h
new file mode 100644
index 00000000000..2580fbbfe94
--- /dev/null
+++ b/arch/score/include/asm/linkage.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_LINKAGE_H
+#define _ASM_SCORE_LINKAGE_H
+
+#endif /* _ASM_SCORE_LINKAGE_H */
diff --git a/arch/score/include/asm/local.h b/arch/score/include/asm/local.h
new file mode 100644
index 00000000000..7e02f13dbba
--- /dev/null
+++ b/arch/score/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_LOCAL_H
+#define _ASM_SCORE_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_SCORE_LOCAL_H */
diff --git a/arch/score/include/asm/mman.h b/arch/score/include/asm/mman.h
new file mode 100644
index 00000000000..84d85ddfed8
--- /dev/null
+++ b/arch/score/include/asm/mman.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MMAN_H
+#define _ASM_SCORE_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#endif /* _ASM_SCORE_MMAN_H */
diff --git a/arch/score/include/asm/mmu.h b/arch/score/include/asm/mmu.h
new file mode 100644
index 00000000000..676828e4c10
--- /dev/null
+++ b/arch/score/include/asm/mmu.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MMU_H
+#define _ASM_SCORE_MMU_H
+
+typedef unsigned long mm_context_t;
+
+#endif /* _ASM_SCORE_MMU_H */
diff --git a/arch/score/include/asm/mmu_context.h b/arch/score/include/asm/mmu_context.h
new file mode 100644
index 00000000000..2644577c96e
--- /dev/null
+++ b/arch/score/include/asm/mmu_context.h
@@ -0,0 +1,113 @@
+#ifndef _ASM_SCORE_MMU_CONTEXT_H
+#define _ASM_SCORE_MMU_CONTEXT_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm-generic/mm_hooks.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/scoreregs.h>
+
+/*
+ * For the fast tlb miss handlers, we keep a per cpu array of pointers
+ * to the current pgd for each processor. Also, the proc. id is stuffed
+ * into the context register.
+ */
+extern unsigned long asid_cache;
+extern unsigned long pgd_current;
+
+#define TLBMISS_HANDLER_SETUP_PGD(pgd) (pgd_current = (unsigned long)(pgd))
+
+#define TLBMISS_HANDLER_SETUP()				\
+do {							\
+	write_c0_context(0);				\
+	TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)	\
+} while (0)
+
+/*
+ * All unused by hardware upper bits will be considered
+ * as a software asid extension.
+ */
+#define ASID_VERSION_MASK	0xfffff000
+#define ASID_FIRST_VERSION	0x1000
+
+/* PEVN    --------- VPN ---------- --ASID--- -NA- */
+/* binary: 0000 0000 0000 0000 0000 0000 0001 0000 */
+/* binary: 0000 0000 0000 0000 0000 1111 1111 0000 */
+#define ASID_INC	0x10
+#define ASID_MASK	0xff0
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+				struct task_struct *tsk)
+{}
+
+static inline void
+get_new_mmu_context(struct mm_struct *mm)
+{
+	unsigned long asid = asid_cache + ASID_INC;
+
+	if (!(asid & ASID_MASK)) {
+		local_flush_tlb_all();		/* start new asid cycle */
+		if (!asid)			/* fix version if needed */
+			asid = ASID_FIRST_VERSION;
+	}
+
+	mm->context = asid;
+	asid_cache = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	mm->context = 0;
+	return 0;
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			struct task_struct *tsk)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if ((next->context ^ asid_cache) & ASID_VERSION_MASK)
+		get_new_mmu_context(next);
+
+	pevn_set(next->context);
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+	local_irq_restore(flags);
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{}
+
+static inline void
+deactivate_mm(struct task_struct *task, struct mm_struct *mm)
+{}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void
+activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	get_new_mmu_context(next);
+	pevn_set(next->context);
+	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
+	local_irq_restore(flags);
+}
+
+#endif /* _ASM_SCORE_MMU_CONTEXT_H */
diff --git a/arch/score/include/asm/module.h b/arch/score/include/asm/module.h
new file mode 100644
index 00000000000..f0b5dc0bd02
--- /dev/null
+++ b/arch/score/include/asm/module.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_SCORE_MODULE_H
+#define _ASM_SCORE_MODULE_H
+
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+struct mod_arch_specific {
+	/* Data Bus Error exception tables */
+	struct list_head dbe_list;
+	const struct exception_table_entry *dbe_start;
+	const struct exception_table_entry *dbe_end;
+};
+
+typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity. */
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+#define Elf_Addr	Elf32_Addr
+
+/* Given an address, look for it in the exception tables. */
+#ifdef CONFIG_MODULES
+const struct exception_table_entry *search_module_dbetables(unsigned long addr);
+#else
+static inline const struct exception_table_entry
+*search_module_dbetables(unsigned long addr)
+{
+	return NULL;
+}
+#endif
+
+#define MODULE_PROC_FAMILY "SCORE7"
+#define MODULE_KERNEL_TYPE "32BIT "
+#define MODULE_KERNEL_SMTC ""
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE MODULE_KERNEL_SMTC
+
+#endif /* _ASM_SCORE_MODULE_H */
diff --git a/arch/score/include/asm/msgbuf.h b/arch/score/include/asm/msgbuf.h
new file mode 100644
index 00000000000..7506721e29f
--- /dev/null
+++ b/arch/score/include/asm/msgbuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MSGBUF_H
+#define _ASM_SCORE_MSGBUF_H
+
+#include <asm-generic/msgbuf.h>
+
+#endif /* _ASM_SCORE_MSGBUF_H */
diff --git a/arch/score/include/asm/mutex.h b/arch/score/include/asm/mutex.h
new file mode 100644
index 00000000000..10d48fe4db9
--- /dev/null
+++ b/arch/score/include/asm/mutex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_MUTEX_H
+#define _ASM_SCORE_MUTEX_H
+
+#include <asm-generic/mutex-dec.h>
+
+#endif /* _ASM_SCORE_MUTEX_H */
diff --git a/arch/score/include/asm/page.h b/arch/score/include/asm/page.h
new file mode 100644
index 00000000000..67e98206be6
--- /dev/null
+++ b/arch/score/include/asm/page.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_SCORE_PAGE_H
+#define _ASM_SCORE_PAGE_H
+
+#include <linux/pfn.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	(12)
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
+#define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr, size)	(((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr, size)	((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr, size)	_ALIGN_UP(addr, size)
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. When not
+ * using MMU this corresponds to the first free page in physical memory (aligned
+ * on a page boundary).
+ */
+#define PAGE_OFFSET		(0xA0000000UL)
+
+#define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+#define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg) \
+			memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pte; } pte_t;		/* page table entry */
+typedef struct { unsigned long pgd; } pgd_t;		/* PGD table entry */
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)	((x).pte)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) })
+#define __pgd(x)	((pgd_t) { (x) })
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#define __pa(vaddr)		((unsigned long) (vaddr))
+#define __va(paddr)		((void *) (paddr))
+
+#define phys_to_pfn(phys)	(PFN_DOWN(phys))
+#define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
+
+#define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
+#define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
+
+#define virt_to_page(vaddr)	(pfn_to_page(virt_to_pfn(vaddr)))
+#define page_to_virt(page)	(pfn_to_virt(page_to_pfn(page)))
+
+#define page_to_phys(page)	(pfn_to_phys(page_to_pfn(page)))
+#define page_to_bus(page)	(page_to_phys(page))
+#define phys_to_page(paddr)	(pfn_to_page(phys_to_pfn(paddr)))
+
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+
+#define ARCH_PFN_OFFSET		(PAGE_OFFSET >> PAGE_SHIFT)
+
+#endif /* __ASSEMBLY__ */
+
+#define virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
+
+#endif /* __KERNEL__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* _ASM_SCORE_PAGE_H */
diff --git a/arch/score/include/asm/param.h b/arch/score/include/asm/param.h
new file mode 100644
index 00000000000..916b8690b6a
--- /dev/null
+++ b/arch/score/include/asm/param.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_PARAM_H
+#define _ASM_SCORE_PARAM_H
+
+#include <asm-generic/param.h>
+
+#endif /* _ASM_SCORE_PARAM_H */
diff --git a/arch/score/include/asm/pci.h b/arch/score/include/asm/pci.h
new file mode 100644
index 00000000000..3f3cfd82549
--- /dev/null
+++ b/arch/score/include/asm/pci.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_PCI_H
+#define _ASM_SCORE_PCI_H
+
+#endif /* _ASM_SCORE_PCI_H */
diff --git a/arch/score/include/asm/percpu.h b/arch/score/include/asm/percpu.h
new file mode 100644
index 00000000000..e7bd4e05b47
--- /dev/null
+++ b/arch/score/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_PERCPU_H
+#define _ASM_SCORE_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_SCORE_PERCPU_H */
diff --git a/arch/score/include/asm/pgalloc.h b/arch/score/include/asm/pgalloc.h
new file mode 100644
index 00000000000..28dacc1cbba
--- /dev/null
+++ b/arch/score/include/asm/pgalloc.h
@@ -0,0 +1,83 @@
+#ifndef _ASM_SCORE_PGALLOC_H
+#define _ASM_SCORE_PGALLOC_H
+
+#include <linux/mm.h>
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+	pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+	pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+
+#define pmd_pgtable(pmd)	pmd_page(pmd)
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret, *init;
+
+	ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER);
+	if (ret) {
+		init = pgd_offset(&init_mm, 0UL);
+		pgd_init((unsigned long)ret);
+		memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
+		(PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+	}
+
+	return ret;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+	unsigned long address)
+{
+	pte_t *pte;
+
+	pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO,
+					PTE_ORDER);
+
+	return pte;
+}
+
+static inline struct page *pte_alloc_one(struct mm_struct *mm,
+	unsigned long address)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
+	if (pte) {
+		clear_highpage(pte);
+		pgtable_page_ctor(pte);
+	}
+	return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_pages((unsigned long)pte, PTE_ORDER);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_pages(pte, PTE_ORDER);
+}
+
+#define __pte_free_tlb(tlb, pte)			\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), pte);			\
+} while (0)
+
+#define check_pgt_cache()		do {} while (0)
+
+#endif /* _ASM_SCORE_PGALLOC_H */
diff --git a/arch/score/include/asm/pgtable-bits.h b/arch/score/include/asm/pgtable-bits.h
new file mode 100644
index 00000000000..ca16d357a64
--- /dev/null
+++ b/arch/score/include/asm/pgtable-bits.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_SCORE_PGTABLE_BITS_H
+#define _ASM_SCORE_PGTABLE_BITS_H
+
+#define _PAGE_ACCESSED			(1<<5)	/* implemented in software */
+#define _PAGE_READ			(1<<6)	/* implemented in software */
+#define _PAGE_WRITE			(1<<7)	/* implemented in software */
+#define _PAGE_PRESENT			(1<<9)	/* implemented in software */
+#define _PAGE_MODIFIED			(1<<10)	/* implemented in software */
+#define _PAGE_FILE			(1<<10)
+
+#define _PAGE_GLOBAL			(1<<0)
+#define _PAGE_VALID			(1<<1)
+#define _PAGE_SILENT_READ		(1<<1)	/* synonym */
+#define _PAGE_DIRTY			(1<<2)	/* Write bit */
+#define _PAGE_SILENT_WRITE		(1<<2)
+#define _PAGE_CACHE			(1<<3)	/* cache */
+#define _CACHE_MASK			(1<<3)
+#define _PAGE_BUFFERABLE		(1<<4)	/*Fallow Spec. */
+
+#define _PAGE_CHG_MASK			\
+	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_CACHE)
+
+#endif /* _ASM_SCORE_PGTABLE_BITS_H */
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
new file mode 100644
index 00000000000..0f7177a4220
--- /dev/null
+++ b/arch/score/include/asm/pgtable.h
@@ -0,0 +1,267 @@
+#ifndef _ASM_SCORE_PGTABLE_H
+#define _ASM_SCORE_PGTABLE_H
+
+#include <linux/const.h>
+#include <asm-generic/pgtable-nopmd.h>
+
+#include <asm/fixmap.h>
+#include <asm/setup.h>
+#include <asm/pgtable-bits.h>
+
+extern void load_pgd(unsigned long pg_dir);
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	22
+#define PGDIR_SIZE	(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+/*
+ * Entries per page directory level: we use two-level, so
+ * we don't really have any PUD/PMD directory physically.
+ */
+#define PGD_ORDER	0
+#define PTE_ORDER	0
+
+#define PTRS_PER_PGD	1024
+#define PTRS_PER_PTE	1024
+
+#define USER_PTRS_PER_PGD	(0x80000000UL/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define VMALLOC_START		(0xc0000000UL)
+
+#define PKMAP_BASE		(0xfd000000UL)
+
+#define VMALLOC_END		(FIXADDR_START - 2*PAGE_SIZE)
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+		__FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+		__FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Empty pgd/pmd entries point to the invalid_pte_table.
+ */
+static inline int pmd_none(pmd_t pmd)
+{
+	return pmd_val(pmd) == (unsigned long) invalid_pte_table;
+}
+
+#define pmd_bad(pmd)		(pmd_val(pmd) & ~PAGE_MASK)
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) != (unsigned long) invalid_pte_table;
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
+}
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_pfn(x)		((unsigned long)((x).pte >> PAGE_SHIFT))
+#define pfn_pte(pfn, prot)	\
+	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define __pgd_offset(address)	pgd_index(address)
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_offset(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+#define pte_offset_kernel(dir, address)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + __pte_offset(address))
+
+#define pte_offset_map(dir, address)	\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_offset_map_nested(dir, address)	\
+	((pte_t *)page_address(pmd_page(*(dir))) + __pte_offset(address))
+#define pte_unmap(pte) ((void)(pte))
+#define pte_unmap_nested(pte) ((void)(pte))
+
+/*
+ * Bits 9(_PAGE_PRESENT) and 10(_PAGE_FILE)are taken,
+ * split up 30 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	30
+#define pte_to_pgoff(_pte)		\
+	(((_pte).pte & 0x1ff) | (((_pte).pte >> 11) << 9))
+#define pgoff_to_pte(off)		\
+	((pte_t) {((off) & 0x1ff) | (((off) >> 9) << 11) | _PAGE_FILE})
+#define __pte_to_swp_entry(pte)		\
+	((swp_entry_t) { pte_val(pte)})
+#define __swp_entry_to_pte(x)	((pte_t) {(x).val})
+
+#define __P000 __pgprot(0)
+#define __P001 __pgprot(0)
+#define __P010 __pgprot(0)
+#define __P011 __pgprot(0)
+#define __P100 __pgprot(0)
+#define __P101 __pgprot(0)
+#define __P110 __pgprot(0)
+#define __P111 __pgprot(0)
+
+#define __S000 __pgprot(0)
+#define __S001 __pgprot(0)
+#define __S010 __pgprot(0)
+#define __S011 __pgprot(0)
+#define __S100 __pgprot(0)
+#define __S101 __pgprot(0)
+#define __S110 __pgprot(0)
+#define __S111 __pgprot(0)
+
+#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+#define pte_clear(mm, addr, xp)		\
+	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define pgd_present(pgd)	(1) /* pages are always present on non MMU */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *) 0)
+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
+
+#define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+#define pud_offset(pgd, address) ((pud_t *) pgd)
+
+#define PAGE_NONE		__pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_SHARED		__pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_COPY		__pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_READONLY		__pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_KERNEL		__pgprot(0) /* these mean nothing to non MMU */
+
+#define pgprot_noncached(x)	(x)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ, off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+
+#define ZERO_PAGE(vaddr)	({ BUG(); NULL; })
+
+#define swapper_pg_dir ((pgd_t *) NULL)
+
+#define pgtable_cache_init()	do {} while (0)
+
+#define arch_enter_lazy_cpu_mode()	do {} while (0)
+
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_WRITE;
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_MODIFIED;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_ACCESSED;
+}
+
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_FILE;
+}
+
+#define pte_special(pte)	(0)
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	pte_val(pte) &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_WRITE;
+	if (pte_val(pte) & _PAGE_MODIFIED)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_MODIFIED;
+	if (pte_val(pte) & _PAGE_WRITE)
+		pte_val(pte) |= _PAGE_SILENT_WRITE;
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_ACCESSED;
+	if (pte_val(pte) & _PAGE_READ)
+		pte_val(pte) |= _PAGE_SILENT_READ;
+	return pte;
+}
+
+#define set_pmd(pmdptr, pmdval)		\
+	 do { *(pmdptr) = (pmdval); } while (0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+extern unsigned long pgd_current;
+extern void paging_init(void);
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+extern void __update_tlb(struct vm_area_struct *vma,
+	unsigned long address,	pte_t pte);
+extern void __update_cache(struct vm_area_struct *vma,
+	unsigned long address,	pte_t pte);
+
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+	unsigned long address, pte_t pte)
+{
+	__update_tlb(vma, address, pte);
+	__update_cache(vma, address, pte);
+}
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/pgtable.h>
+
+void setup_memory(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_SCORE_PGTABLE_H */
diff --git a/arch/score/include/asm/poll.h b/arch/score/include/asm/poll.h
new file mode 100644
index 00000000000..18532db0286
--- /dev/null
+++ b/arch/score/include/asm/poll.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_POLL_H
+#define _ASM_SCORE_POLL_H
+
+#include <asm-generic/poll.h>
+
+#endif /* _ASM_SCORE_POLL_H */
diff --git a/arch/score/include/asm/posix_types.h b/arch/score/include/asm/posix_types.h
new file mode 100644
index 00000000000..b88acf80048
--- /dev/null
+++ b/arch/score/include/asm/posix_types.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_POSIX_TYPES_H
+#define _ASM_SCORE_POSIX_TYPES_H
+
+#include <asm-generic/posix_types.h>
+
+#endif /* _ASM_SCORE_POSIX_TYPES_H */
diff --git a/arch/score/include/asm/processor.h b/arch/score/include/asm/processor.h
new file mode 100644
index 00000000000..7e22f216d77
--- /dev/null
+++ b/arch/score/include/asm/processor.h
@@ -0,0 +1,106 @@
+#ifndef _ASM_SCORE_PROCESSOR_H
+#define _ASM_SCORE_PROCESSOR_H
+
+#include <linux/cpumask.h>
+#include <linux/threads.h>
+
+#include <asm/segment.h>
+
+struct task_struct;
+
+/*
+ * System setup and hardware flags..
+ */
+extern void (*cpu_wait)(void);
+
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+extern void start_thread(struct pt_regs *regs,
+			unsigned long pc, unsigned long sp);
+extern unsigned long get_wchan(struct task_struct *p);
+
+/*
+ * Return current * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+#define cpu_relax()		barrier()
+#define release_thread(thread)	do {} while (0)
+#define prepare_to_copy(tsk)	do {} while (0)
+
+/*
+ * User space process size: 2GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE	0x7fff8000UL
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	((TASK_SIZE / 3) & ~(PAGE_SIZE))
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+/*
+ * If you change thread_struct remember to change the #defines below too!
+ */
+struct thread_struct {
+	unsigned long reg0, reg2, reg3;
+	unsigned long reg12, reg13, reg14, reg15, reg16;
+	unsigned long reg17, reg18, reg19, reg20, reg21;
+
+	unsigned long cp0_psr;
+	unsigned long cp0_ema;		/* Last user fault */
+	unsigned long cp0_badvaddr;	/* Last user fault */
+	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
+	unsigned long error_code;
+	unsigned long trap_no;
+
+	unsigned long mflags;
+	unsigned long reg29;
+
+	unsigned long single_step;
+	unsigned long ss_nextcnt;
+
+	unsigned long insn1_type;
+	unsigned long addr1;
+	unsigned long insn1;
+
+	unsigned long insn2_type;
+	unsigned long addr2;
+	unsigned long insn2;
+
+	mm_segment_t current_ds;
+};
+
+#define INIT_THREAD {						\
+	.reg0			= 0,				\
+	.reg2			= 0,				\
+	.reg3			= 0,				\
+	.reg12			= 0,				\
+	.reg13			= 0,				\
+	.reg14			= 0,				\
+	.reg15			= 0,				\
+	.reg16			= 0,				\
+	.reg17			= 0,				\
+	.reg18			= 0,				\
+	.reg19			= 0,				\
+	.reg20			= 0,				\
+	.reg21			= 0,				\
+	.cp0_psr		= 0,				\
+	.error_code		= 0,				\
+	.trap_no		= 0,				\
+}
+
+#define kstk_tos(tsk)		\
+	((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
+#define task_pt_regs(tsk)	((struct pt_regs *)kstk_tos(tsk) - 1)
+
+#define KSTK_EIP(tsk)		(task_pt_regs(tsk)->cp0_epc)
+#define KSTK_ESP(tsk)		(task_pt_regs(tsk)->regs[29])
+
+#endif /* _ASM_SCORE_PROCESSOR_H */
diff --git a/arch/score/include/asm/ptrace.h b/arch/score/include/asm/ptrace.h
new file mode 100644
index 00000000000..1a4900ac49f
--- /dev/null
+++ b/arch/score/include/asm/ptrace.h
@@ -0,0 +1,87 @@
+#ifndef _ASM_SCORE_PTRACE_H
+#define _ASM_SCORE_PTRACE_H
+
+#define PC		32
+#define CONDITION	33
+#define ECR		34
+#define EMA		35
+#define CEH		36
+#define CEL		37
+#define COUNTER		38
+#define LDCR		39
+#define STCR		40
+#define PSR		41
+
+#define SINGLESTEP16_INSN	0x7006
+#define SINGLESTEP32_INSN	0x840C8000
+#define BREAKPOINT16_INSN	0x7002		/* work on SPG300 */
+#define BREAKPOINT32_INSN	0x84048000	/* work on SPG300 */
+
+/* Define instruction mask */
+#define INSN32_MASK	0x80008000
+
+#define J32	0x88008000	/* 1_00010_0000000000_1_000000000000000 */
+#define J32M	0xFC008000	/* 1_11111_0000000000_1_000000000000000 */
+
+#define B32	0x90008000	/* 1_00100_0000000000_1_000000000000000 */
+#define B32M	0xFC008000
+#define BL32	0x90008001	/* 1_00100_0000000000_1_000000000000001 */
+#define BL32M	B32
+#define BR32	0x80008008	/* 1_00000_0000000000_1_00000000_000100_0 */
+#define BR32M	0xFFE0807E
+#define BRL32	0x80008009	/* 1_00000_0000000000_1_00000000_000100_1 */
+#define BRL32M	BR32M
+
+#define B32_SET	(J32 | B32 | BL32 | BR32 | BRL32)
+
+#define J16	0x3000		/* 0_011_....... */
+#define J16M	0xF000
+#define B16	0x4000		/* 0_100_....... */
+#define B16M	0xF000
+#define BR16	0x0004		/* 0_000.......0100 */
+#define BR16M	0xF00F
+#define B16_SET (J16 | B16 | BR16)
+
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception. As usual the registers k0/k1 aren't being saved.
+ */
+struct pt_regs {
+	unsigned long pad0[6];
+	unsigned long orig_r4;
+	unsigned long orig_r7;
+	unsigned long regs[32];
+
+	unsigned long cel;
+	unsigned long ceh;
+
+	unsigned long sr0;	/* cnt */
+	unsigned long sr1;	/* lcr */
+	unsigned long sr2;	/* scr */
+
+	unsigned long cp0_epc;
+	unsigned long cp0_ema;
+	unsigned long cp0_psr;
+	unsigned long cp0_ecr;
+	unsigned long cp0_condition;
+
+	long is_syscall;
+};
+
+#ifdef __KERNEL__
+
+/*
+ * Does the process account for user or for system time?
+ */
+#define user_mode(regs) 	((regs->cp0_psr & 8) == 8)
+
+#define instruction_pointer(regs) (0)
+#define profile_pc(regs) instruction_pointer(regs)
+
+extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+extern int read_tsk_long(struct task_struct *, unsigned long, unsigned long *);
+extern void clear_single_step(struct task_struct *);
+#endif
+
+#endif /* _ASM_SCORE_PTRACE_H */
diff --git a/arch/score/include/asm/resource.h b/arch/score/include/asm/resource.h
new file mode 100644
index 00000000000..9ce22bc7b47
--- /dev/null
+++ b/arch/score/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_RESOURCE_H
+#define _ASM_SCORE_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_SCORE_RESOURCE_H */
diff --git a/arch/score/include/asm/scatterlist.h b/arch/score/include/asm/scatterlist.h
new file mode 100644
index 00000000000..9f533b8362c
--- /dev/null
+++ b/arch/score/include/asm/scatterlist.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SCATTERLIST_H
+#define _ASM_SCORE_SCATTERLIST_H
+
+#include <asm-generic/scatterlist.h>
+
+#endif /* _ASM_SCORE_SCATTERLIST_H */
diff --git a/arch/score/include/asm/scoreregs.h b/arch/score/include/asm/scoreregs.h
new file mode 100644
index 00000000000..d0ad2920451
--- /dev/null
+++ b/arch/score/include/asm/scoreregs.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_SCORE_SCOREREGS_H
+#define _ASM_SCORE_SCOREREGS_H
+
+#include <linux/linkage.h>
+
+/* TIMER register */
+#define TIME0BASE		0x96080000
+#define P_TIMER0_CTRL		(TIME0BASE + 0x00)
+#define P_TIMER0_CPP_CTRL	(TIME0BASE + 0x04)
+#define P_TIMER0_PRELOAD	(TIME0BASE + 0x08)
+#define P_TIMER0_CPP_REG	(TIME0BASE + 0x0C)
+#define P_TIMER0_UPCNT		(TIME0BASE + 0x10)
+
+/* Timer Controller Register */
+/* bit 0 Timer enable */
+#define TMR_DISABLE	0x0000
+#define TMR_ENABLE	0x0001
+
+/* bit 1 Interrupt enable */
+#define TMR_IE_DISABLE	0x0000
+#define TMR_IE_ENABLE	0x0002
+
+/* bit 2 Output enable */
+#define TMR_OE_DISABLE	0x0004
+#define TMR_OE_ENABLE	0x0000
+
+/* bit4 Up/Down counting selection */
+#define TMR_UD_DOWN	0x0000
+#define TMR_UD_UP	0x0010
+
+/* bit5 Up/Down counting control selection */
+#define TMR_UDS_UD	0x0000
+#define TMR_UDS_EXTUD	0x0020
+
+/* bit6 Time output mode */
+#define TMR_OM_TOGGLE	0x0000
+#define TMR_OM_PILSE	0x0040
+
+/* bit 8..9 External input active edge selection */
+#define TMR_ES_PE	0x0000
+#define TMR_ES_NE	0x0100
+#define TMR_ES_BOTH	0x0200
+
+/* bit 10..11 Operating mode */
+#define TMR_M_FREE	0x0000 /* free running timer mode */
+#define TMR_M_PERIODIC	0x0400 /* periodic timer mode */
+#define TMR_M_FC	0x0800 /* free running counter mode */
+#define TMR_M_PC	0x0c00 /* periodic counter mode */
+
+#define SYSTEM_CLOCK		(27*1000000/4)		/* 27 MHz */
+#endif /* _ASM_SCORE_SCOREREGS_H */
diff --git a/arch/score/include/asm/sections.h b/arch/score/include/asm/sections.h
new file mode 100644
index 00000000000..9441d23af00
--- /dev/null
+++ b/arch/score/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SECTIONS_H
+#define _ASM_SCORE_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_SCORE_SECTIONS_H */
diff --git a/arch/score/include/asm/segment.h b/arch/score/include/asm/segment.h
new file mode 100644
index 00000000000..e16cf6afb49
--- /dev/null
+++ b/arch/score/include/asm/segment.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SCORE_SEGMENT_H
+#define _ASM_SCORE_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define KERNEL_DS	((mm_segment_t){0})
+#define USER_DS	KERNEL_DS
+
+# define get_ds()	(KERNEL_DS)
+# define get_fs()	(current_thread_info()->addr_limit)
+# define set_fs(x)	\
+	do { current_thread_info()->addr_limit = (x); } while (0)
+
+# define segment_eq(a, b)	((a).seg == (b).seg)
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_SCORE_SEGMENT_H */
diff --git a/arch/score/include/asm/sembuf.h b/arch/score/include/asm/sembuf.h
new file mode 100644
index 00000000000..dae5e835ce9
--- /dev/null
+++ b/arch/score/include/asm/sembuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SEMBUF_H
+#define _ASM_SCORE_SEMBUF_H
+
+#include <asm-generic/sembuf.h>
+
+#endif /* _ASM_SCORE_SEMBUF_H */
diff --git a/arch/score/include/asm/setup.h b/arch/score/include/asm/setup.h
new file mode 100644
index 00000000000..de89eff98da
--- /dev/null
+++ b/arch/score/include/asm/setup.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_SCORE_SETUP_H
+#define _ASM_SCORE_SETUP_H
+
+#define COMMAND_LINE_SIZE	256
+#define MEM_SIZE		0x2000000
+
+#ifdef __KERNEL__
+
+extern void pagetable_init(void);
+extern void pgd_init(unsigned long page);
+
+extern void setup_early_printk(void);
+extern void cpu_cache_init(void);
+extern void tlb_init(void);
+
+extern void handle_nmi(void);
+extern void handle_adelinsn(void);
+extern void handle_adedata(void);
+extern void handle_ibe(void);
+extern void handle_pel(void);
+extern void handle_sys(void);
+extern void handle_ccu(void);
+extern void handle_ri(void);
+extern void handle_tr(void);
+extern void handle_ades(void);
+extern void handle_cee(void);
+extern void handle_cpe(void);
+extern void handle_dve(void);
+extern void handle_dbe(void);
+extern void handle_reserved(void);
+extern void handle_tlb_refill(void);
+extern void handle_tlb_invaild(void);
+extern void handle_mod(void);
+extern void debug_exception_vector(void);
+extern void general_exception_vector(void);
+extern void interrupt_exception_vector(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SCORE_SETUP_H */
diff --git a/arch/score/include/asm/shmbuf.h b/arch/score/include/asm/shmbuf.h
new file mode 100644
index 00000000000..c85b2429ba2
--- /dev/null
+++ b/arch/score/include/asm/shmbuf.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SHMBUF_H
+#define _ASM_SCORE_SHMBUF_H
+
+#include <asm-generic/shmbuf.h>
+
+#endif /* _ASM_SCORE_SHMBUF_H */
diff --git a/arch/score/include/asm/shmparam.h b/arch/score/include/asm/shmparam.h
new file mode 100644
index 00000000000..1d60813141b
--- /dev/null
+++ b/arch/score/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SHMPARAM_H
+#define _ASM_SCORE_SHMPARAM_H
+
+#include <asm-generic/shmparam.h>
+
+#endif /* _ASM_SCORE_SHMPARAM_H */
diff --git a/arch/score/include/asm/sigcontext.h b/arch/score/include/asm/sigcontext.h
new file mode 100644
index 00000000000..5ffda39ddb9
--- /dev/null
+++ b/arch/score/include/asm/sigcontext.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_SCORE_SIGCONTEXT_H
+#define _ASM_SCORE_SIGCONTEXT_H
+
+/*
+ * Keep this struct definition in sync with the sigcontext fragment
+ * in arch/score/tools/offset.c
+ */
+struct sigcontext {
+	unsigned int		sc_regmask;
+	unsigned int		sc_psr;
+	unsigned int		sc_condition;
+	unsigned long		sc_pc;
+	unsigned long		sc_regs[32];
+	unsigned int		sc_ssflags;
+	unsigned int		sc_mdceh;
+	unsigned int		sc_mdcel;
+	unsigned int		sc_ecr;
+	unsigned long		sc_ema;
+	unsigned long		sc_sigset[4];
+};
+
+#endif /* _ASM_SCORE_SIGCONTEXT_H */
diff --git a/arch/score/include/asm/siginfo.h b/arch/score/include/asm/siginfo.h
new file mode 100644
index 00000000000..87ca35607a2
--- /dev/null
+++ b/arch/score/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SIGINFO_H
+#define _ASM_SCORE_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_SCORE_SIGINFO_H */
diff --git a/arch/score/include/asm/signal.h b/arch/score/include/asm/signal.h
new file mode 100644
index 00000000000..2605bc06b64
--- /dev/null
+++ b/arch/score/include/asm/signal.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SIGNAL_H
+#define _ASM_SCORE_SIGNAL_H
+
+#include <asm-generic/signal.h>
+
+#endif /* _ASM_SCORE_SIGNAL_H */
diff --git a/arch/score/include/asm/socket.h b/arch/score/include/asm/socket.h
new file mode 100644
index 00000000000..612a70e385b
--- /dev/null
+++ b/arch/score/include/asm/socket.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SOCKET_H
+#define _ASM_SCORE_SOCKET_H
+
+#include <asm-generic/socket.h>
+
+#endif /* _ASM_SCORE_SOCKET_H */
diff --git a/arch/score/include/asm/sockios.h b/arch/score/include/asm/sockios.h
new file mode 100644
index 00000000000..ba825648018
--- /dev/null
+++ b/arch/score/include/asm/sockios.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SOCKIOS_H
+#define _ASM_SCORE_SOCKIOS_H
+
+#include <asm-generic/sockios.h>
+
+#endif /* _ASM_SCORE_SOCKIOS_H */
diff --git a/arch/score/include/asm/stat.h b/arch/score/include/asm/stat.h
new file mode 100644
index 00000000000..5037055500a
--- /dev/null
+++ b/arch/score/include/asm/stat.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_STAT_H
+#define _ASM_SCORE_STAT_H
+
+#include <asm-generic/stat.h>
+
+#endif /* _ASM_SCORE_STAT_H */
diff --git a/arch/score/include/asm/statfs.h b/arch/score/include/asm/statfs.h
new file mode 100644
index 00000000000..36e41004e99
--- /dev/null
+++ b/arch/score/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_STATFS_H
+#define _ASM_SCORE_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_SCORE_STATFS_H */
diff --git a/arch/score/include/asm/string.h b/arch/score/include/asm/string.h
new file mode 100644
index 00000000000..8a6bf5063aa
--- /dev/null
+++ b/arch/score/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SCORE_STRING_H
+#define _ASM_SCORE_STRING_H
+
+extern void *memset(void *__s, int __c, size_t __count);
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#endif /* _ASM_SCORE_STRING_H */
diff --git a/arch/score/include/asm/swab.h b/arch/score/include/asm/swab.h
new file mode 100644
index 00000000000..fadc3cc6d8a
--- /dev/null
+++ b/arch/score/include/asm/swab.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_SWAB_H
+#define _ASM_SCORE_SWAB_H
+
+#include <asm-generic/swab.h>
+
+#endif /* _ASM_SCORE_SWAB_H */
diff --git a/arch/score/include/asm/syscalls.h b/arch/score/include/asm/syscalls.h
new file mode 100644
index 00000000000..00c28e04fdf
--- /dev/null
+++ b/arch/score/include/asm/syscalls.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_SCORE_SYSCALLS_H
+#define _ASM_SCORE_SYSCALLS_H
+
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
+
+#include <asm-generic/syscalls.h>
+
+#endif /* _ASM_SCORE_SYSCALLS_H */
diff --git a/arch/score/include/asm/system.h b/arch/score/include/asm/system.h
new file mode 100644
index 00000000000..589d5c7e171
--- /dev/null
+++ b/arch/score/include/asm/system.h
@@ -0,0 +1,90 @@
+#ifndef _ASM_SCORE_SYSTEM_H
+#define _ASM_SCORE_SYSTEM_H
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+struct pt_regs;
+struct task_struct;
+
+extern void *resume(void *last, void *next, void *next_ti);
+
+#define switch_to(prev, next, last)				\
+do {								\
+	(last) = resume(prev, next, task_thread_info(next));	\
+} while (0)
+
+#define finish_arch_switch(prev)	do {} while (0)
+
+typedef void (*vi_handler_t)(void);
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#define mb()		barrier()
+#define rmb()		barrier()
+#define wmb()		barrier()
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+
+#define read_barrier_depends()		do {} while (0)
+#define smp_read_barrier_depends()	do {} while (0)
+
+#define set_mb(var, value) 		do {var = value; wmb(); } while (0)
+
+#define __HAVE_ARCH_CMPXCHG	1
+
+#include <asm-generic/cmpxchg-local.h>
+
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define xchg(ptr, v)						\
+	((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr),	\
+					(unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+				unsigned long old, unsigned long new)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define cmpxchg(ptr, o, n)					\
+	((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr),	\
+					(unsigned long)(o),	\
+					(unsigned long)(n)))
+
+extern void __die(const char *, struct pt_regs *, const char *,
+	const char *, unsigned long) __attribute__((noreturn));
+extern void __die_if_kernel(const char *, struct pt_regs *, const char *,
+	const char *, unsigned long);
+
+#define die(msg, regs)							\
+	__die(msg, regs, __FILE__ ":", __func__, __LINE__)
+#define die_if_kernel(msg, regs)					\
+	__die_if_kernel(msg, regs, __FILE__ ":", __func__, __LINE__)
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_SCORE_SYSTEM_H */
diff --git a/arch/score/include/asm/termbits.h b/arch/score/include/asm/termbits.h
new file mode 100644
index 00000000000..9a95c141243
--- /dev/null
+++ b/arch/score/include/asm/termbits.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TERMBITS_H
+#define _ASM_SCORE_TERMBITS_H
+
+#include <asm-generic/termbits.h>
+
+#endif /* _ASM_SCORE_TERMBITS_H */
diff --git a/arch/score/include/asm/termios.h b/arch/score/include/asm/termios.h
new file mode 100644
index 00000000000..40984e811ad
--- /dev/null
+++ b/arch/score/include/asm/termios.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TERMIOS_H
+#define _ASM_SCORE_TERMIOS_H
+
+#include <asm-generic/termios.h>
+
+#endif /* _ASM_SCORE_TERMIOS_H */
diff --git a/arch/score/include/asm/thread_info.h b/arch/score/include/asm/thread_info.h
new file mode 100644
index 00000000000..0af8ca074c8
--- /dev/null
+++ b/arch/score/include/asm/thread_info.h
@@ -0,0 +1,103 @@
+#ifndef _ASM_SCORE_THREAD_INFO_H
+#define _ASM_SCORE_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define KU_MASK	0x08
+#define KU_USER	0x08
+#define KU_KERN	0x00
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		tp_value;	/* thread pointer */
+	__u32			cpu;		/* current CPU */
+
+	/* 0 => preemptable, < 0 => BUG */
+	int			preempt_count;
+
+	/*
+	 * thread address space:
+	 * 0-0xBFFFFFFF for user-thead
+	 * 0-0xFFFFFFFF for kernel-thread
+	 */
+	mm_segment_t		addr_limit;
+	struct restart_block	restart_block;
+	struct pt_regs		*regs;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* How to get the thread information struct from C. */
+register struct thread_info *__current_thread_info __asm__("r28");
+#define current_thread_info()	__current_thread_info
+
+/* thread information allocation */
+#define THREAD_SIZE_ORDER 	(1)
+#define THREAD_SIZE 		(PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_MASK 		(THREAD_SIZE - 1UL)
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#define free_thread_info(info) kfree(info)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling
+						 TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_WORK_MASK		(0x0000ffff)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SCORE_THREAD_INFO_H */
diff --git a/arch/score/include/asm/timex.h b/arch/score/include/asm/timex.h
new file mode 100644
index 00000000000..a524ae0c5e7
--- /dev/null
+++ b/arch/score/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SCORE_TIMEX_H
+#define _ASM_SCORE_TIMEX_H
+
+#define CLOCK_TICK_RATE 27000000 /* Timer input freq. */
+
+#include <asm-generic/timex.h>
+
+#endif /* _ASM_SCORE_TIMEX_H */
diff --git a/arch/score/include/asm/tlb.h b/arch/score/include/asm/tlb.h
new file mode 100644
index 00000000000..46882ed524e
--- /dev/null
+++ b/arch/score/include/asm/tlb.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_SCORE_TLB_H
+#define _ASM_SCORE_TLB_H
+
+/*
+ * SCORE doesn't need any special per-pte or per-vma handling, except
+ * we need to flush cache for area to be unmapped.
+ */
+#define tlb_start_vma(tlb, vma)		do {} while (0)
+#define tlb_end_vma(tlb, vma)		do {} while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do {} while (0)
+#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
+
+extern void score7_FTLB_refill_Handler(void);
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_SCORE_TLB_H */
diff --git a/arch/score/include/asm/tlbflush.h b/arch/score/include/asm/tlbflush.h
new file mode 100644
index 00000000000..9cce978367d
--- /dev/null
+++ b/arch/score/include/asm/tlbflush.h
@@ -0,0 +1,142 @@
+#ifndef _ASM_SCORE_TLBFLUSH_H
+#define _ASM_SCORE_TLBFLUSH_H
+
+#include <linux/mm.h>
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb_all() flushes all processes TLB entries
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+	unsigned long start, unsigned long end);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+	unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+	unsigned long page);
+extern void local_flush_tlb_one(unsigned long vaddr);
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_range(vma, vmaddr, end) \
+	local_flush_tlb_range(vma, vmaddr, end)
+#define flush_tlb_kernel_range(vmaddr, end) \
+	local_flush_tlb_kernel_range(vmaddr, end)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(vaddr)		local_flush_tlb_one(vaddr)
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long pevn_get(void)
+{
+	unsigned long val;
+
+	__asm__ __volatile__(
+		"mfcr %0, cr11\n"
+		"nop\nnop\n"
+		: "=r" (val));
+
+	return val;
+}
+
+static inline void pevn_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr11\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (val));
+}
+
+static inline void pectx_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr12\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (val));
+}
+
+static inline unsigned long pectx_get(void)
+{
+	unsigned long val;
+	__asm__ __volatile__(
+		"mfcr %0, cr12\n"
+		"nop\nnop\n"
+	: "=r" (val));
+	return val;
+}
+static inline unsigned long tlblock_get(void)
+{
+	unsigned long val;
+
+	__asm__ __volatile__(
+		"mfcr %0, cr7\n"
+		"nop\nnop\n"
+	: "=r" (val));
+	return val;
+}
+static inline void tlblock_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr7\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (val));
+}
+
+static inline void tlbpt_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr8\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (val));
+}
+
+static inline long tlbpt_get(void)
+{
+	long val;
+
+	__asm__ __volatile__(
+		"mfcr %0, cr8\n"
+		"nop\nnop\n"
+		: "=r" (val));
+
+	return val;
+}
+
+static inline void peaddr_set(unsigned long val)
+{
+	__asm__ __volatile__(
+		"mtcr %0, cr9\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (val));
+}
+
+/* TLB operations. */
+static inline void tlb_probe(void)
+{
+	__asm__ __volatile__("stlb;nop;nop;nop;nop;nop");
+}
+
+static inline void tlb_read(void)
+{
+	__asm__ __volatile__("mftlb;nop;nop;nop;nop;nop");
+}
+
+static inline void tlb_write_indexed(void)
+{
+	__asm__ __volatile__("mtptlb;nop;nop;nop;nop;nop");
+}
+
+static inline void tlb_write_random(void)
+{
+	__asm__ __volatile__("mtrtlb;nop;nop;nop;nop;nop");
+}
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif /* _ASM_SCORE_TLBFLUSH_H */
diff --git a/arch/score/include/asm/topology.h b/arch/score/include/asm/topology.h
new file mode 100644
index 00000000000..425fba381f8
--- /dev/null
+++ b/arch/score/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TOPOLOGY_H
+#define _ASM_SCORE_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SCORE_TOPOLOGY_H */
diff --git a/arch/score/include/asm/types.h b/arch/score/include/asm/types.h
new file mode 100644
index 00000000000..2140032778e
--- /dev/null
+++ b/arch/score/include/asm/types.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_TYPES_H
+#define _ASM_SCORE_TYPES_H
+
+#include <asm-generic/types.h>
+
+#endif /* _ASM_SCORE_TYPES_H */
diff --git a/arch/score/include/asm/uaccess.h b/arch/score/include/asm/uaccess.h
new file mode 100644
index 00000000000..43ce28a1d0f
--- /dev/null
+++ b/arch/score/include/asm/uaccess.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_SCORE_UACCESS_H
+#define _ASM_SCORE_UACCESS_H
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+struct pt_regs;
+extern int fixup_exception(struct pt_regs *regs);
+
+#ifndef __ASSEMBLY__
+
+#define __range_ok(addr, size)					\
+	((((unsigned long)(addr) >= 0x80000000)			\
+	|| ((unsigned long)(size) > 0x80000000)			\
+	|| (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000)))
+
+#define __access_ok(addr, size) \
+	(__range_ok((addr), (size)) == 0)
+
+#include <asm-generic/uaccess.h>
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_SCORE_UACCESS_H */
diff --git a/arch/score/include/asm/unaligned.h b/arch/score/include/asm/unaligned.h
new file mode 100644
index 00000000000..2fc06de51c6
--- /dev/null
+++ b/arch/score/include/asm/unaligned.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SCORE_UNALIGNED_H
+#define _ASM_SCORE_UNALIGNED_H
+
+#include <asm-generic/unaligned.h>
+
+#endif /* _ASM_SCORE_UNALIGNED_H */
diff --git a/arch/score/include/asm/unistd.h b/arch/score/include/asm/unistd.h
new file mode 100644
index 00000000000..9aa3a159bbf
--- /dev/null
+++ b/arch/score/include/asm/unistd.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_SCORE_UNISTD_H
+#define _ASM_SCORE_UNISTD_H
+
+#define __ARCH_HAVE_MMU
+
+#include <asm-generic/unistd.h>
+
+#endif /* _ASM_SCORE_UNISTD_H */
diff --git a/arch/score/include/asm/user.h b/arch/score/include/asm/user.h
new file mode 100644
index 00000000000..3cf75720fe0
--- /dev/null
+++ b/arch/score/include/asm/user.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SCORE_USER_H
+#define _ASM_SCORE_USER_H
+
+#endif /* _ASM_SCORE_USER_H */
diff --git a/arch/score/kernel/Makefile b/arch/score/kernel/Makefile
new file mode 100644
index 00000000000..1e5de89d5c7
--- /dev/null
+++ b/arch/score/kernel/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the Linux/SCORE kernel.
+#
+
+extra-y	:= head.o vmlinux.lds
+
+obj-y += entry.o init_task.o irq.o process.o ptrace.o \
+	setup.o signal.o sys_score.o time.o traps.o
+
+obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/score/kernel/asm-offsets.c b/arch/score/kernel/asm-offsets.c
new file mode 100644
index 00000000000..57788f44c6f
--- /dev/null
+++ b/arch/score/kernel/asm-offsets.c
@@ -0,0 +1,216 @@
+/*
+ * arch/score/kernel/asm-offsets.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kbuild.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <asm-generic/cmpxchg-local.h>
+
+void output_ptreg_defines(void)
+{
+	COMMENT("SCORE pt_regs offsets.");
+	OFFSET(PT_R0, pt_regs, regs[0]);
+	OFFSET(PT_R1, pt_regs, regs[1]);
+	OFFSET(PT_R2, pt_regs, regs[2]);
+	OFFSET(PT_R3, pt_regs, regs[3]);
+	OFFSET(PT_R4, pt_regs, regs[4]);
+	OFFSET(PT_R5, pt_regs, regs[5]);
+	OFFSET(PT_R6, pt_regs, regs[6]);
+	OFFSET(PT_R7, pt_regs, regs[7]);
+	OFFSET(PT_R8, pt_regs, regs[8]);
+	OFFSET(PT_R9, pt_regs, regs[9]);
+	OFFSET(PT_R10, pt_regs, regs[10]);
+	OFFSET(PT_R11, pt_regs, regs[11]);
+	OFFSET(PT_R12, pt_regs, regs[12]);
+	OFFSET(PT_R13, pt_regs, regs[13]);
+	OFFSET(PT_R14, pt_regs, regs[14]);
+	OFFSET(PT_R15, pt_regs, regs[15]);
+	OFFSET(PT_R16, pt_regs, regs[16]);
+	OFFSET(PT_R17, pt_regs, regs[17]);
+	OFFSET(PT_R18, pt_regs, regs[18]);
+	OFFSET(PT_R19, pt_regs, regs[19]);
+	OFFSET(PT_R20, pt_regs, regs[20]);
+	OFFSET(PT_R21, pt_regs, regs[21]);
+	OFFSET(PT_R22, pt_regs, regs[22]);
+	OFFSET(PT_R23, pt_regs, regs[23]);
+	OFFSET(PT_R24, pt_regs, regs[24]);
+	OFFSET(PT_R25, pt_regs, regs[25]);
+	OFFSET(PT_R26, pt_regs, regs[26]);
+	OFFSET(PT_R27, pt_regs, regs[27]);
+	OFFSET(PT_R28, pt_regs, regs[28]);
+	OFFSET(PT_R29, pt_regs, regs[29]);
+	OFFSET(PT_R30, pt_regs, regs[30]);
+	OFFSET(PT_R31, pt_regs, regs[31]);
+
+	OFFSET(PT_ORIG_R4, pt_regs, orig_r4);
+	OFFSET(PT_ORIG_R7, pt_regs, orig_r7);
+	OFFSET(PT_CEL, pt_regs, cel);
+	OFFSET(PT_CEH, pt_regs, ceh);
+	OFFSET(PT_SR0, pt_regs, sr0);
+	OFFSET(PT_SR1, pt_regs, sr1);
+	OFFSET(PT_SR2, pt_regs, sr2);
+	OFFSET(PT_EPC, pt_regs, cp0_epc);
+	OFFSET(PT_EMA, pt_regs, cp0_ema);
+	OFFSET(PT_PSR, pt_regs, cp0_psr);
+	OFFSET(PT_ECR, pt_regs, cp0_ecr);
+	OFFSET(PT_CONDITION, pt_regs, cp0_condition);
+	OFFSET(PT_IS_SYSCALL, pt_regs, is_syscall);
+
+	DEFINE(PT_SIZE, sizeof(struct pt_regs));
+	BLANK();
+}
+
+void output_task_defines(void)
+{
+	COMMENT("SCORE task_struct offsets.");
+	OFFSET(TASK_STATE, task_struct, state);
+	OFFSET(TASK_THREAD_INFO, task_struct, stack);
+	OFFSET(TASK_FLAGS, task_struct, flags);
+	OFFSET(TASK_MM, task_struct, mm);
+	OFFSET(TASK_PID, task_struct, pid);
+	DEFINE(TASK_STRUCT_SIZE, sizeof(struct task_struct));
+	BLANK();
+}
+
+void output_thread_info_defines(void)
+{
+	COMMENT("SCORE thread_info offsets.");
+	OFFSET(TI_TASK, thread_info, task);
+	OFFSET(TI_EXEC_DOMAIN, thread_info, exec_domain);
+	OFFSET(TI_FLAGS, thread_info, flags);
+	OFFSET(TI_TP_VALUE, thread_info, tp_value);
+	OFFSET(TI_CPU, thread_info, cpu);
+	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
+	OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit);
+	OFFSET(TI_RESTART_BLOCK, thread_info, restart_block);
+	OFFSET(TI_REGS, thread_info, regs);
+	DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
+	DEFINE(KERNEL_STACK_MASK, THREAD_MASK);
+	BLANK();
+}
+
+void output_thread_defines(void)
+{
+	COMMENT("SCORE specific thread_struct offsets.");
+	OFFSET(THREAD_REG0, task_struct, thread.reg0);
+	OFFSET(THREAD_REG2, task_struct, thread.reg2);
+	OFFSET(THREAD_REG3, task_struct, thread.reg3);
+	OFFSET(THREAD_REG12, task_struct, thread.reg12);
+	OFFSET(THREAD_REG13, task_struct, thread.reg13);
+	OFFSET(THREAD_REG14, task_struct, thread.reg14);
+	OFFSET(THREAD_REG15, task_struct, thread.reg15);
+	OFFSET(THREAD_REG16, task_struct, thread.reg16);
+	OFFSET(THREAD_REG17, task_struct, thread.reg17);
+	OFFSET(THREAD_REG18, task_struct, thread.reg18);
+	OFFSET(THREAD_REG19, task_struct, thread.reg19);
+	OFFSET(THREAD_REG20, task_struct, thread.reg20);
+	OFFSET(THREAD_REG21, task_struct, thread.reg21);
+	OFFSET(THREAD_REG29, task_struct, thread.reg29);
+
+	OFFSET(THREAD_PSR, task_struct, thread.cp0_psr);
+	OFFSET(THREAD_EMA, task_struct, thread.cp0_ema);
+	OFFSET(THREAD_BADUADDR, task_struct, thread.cp0_baduaddr);
+	OFFSET(THREAD_ECODE, task_struct, thread.error_code);
+	OFFSET(THREAD_TRAPNO, task_struct, thread.trap_no);
+	BLANK();
+}
+
+void output_mm_defines(void)
+{
+	COMMENT("Size of struct page");
+	DEFINE(STRUCT_PAGE_SIZE, sizeof(struct page));
+	BLANK();
+	COMMENT("Linux mm_struct offsets.");
+	OFFSET(MM_USERS, mm_struct, mm_users);
+	OFFSET(MM_PGD, mm_struct, pgd);
+	OFFSET(MM_CONTEXT, mm_struct, context);
+	BLANK();
+	DEFINE(_PAGE_SIZE, PAGE_SIZE);
+	DEFINE(_PAGE_SHIFT, PAGE_SHIFT);
+	BLANK();
+	DEFINE(_PGD_T_SIZE, sizeof(pgd_t));
+	DEFINE(_PTE_T_SIZE, sizeof(pte_t));
+	BLANK();
+	DEFINE(_PGD_ORDER, PGD_ORDER);
+	DEFINE(_PTE_ORDER, PTE_ORDER);
+	BLANK();
+	DEFINE(_PGDIR_SHIFT, PGDIR_SHIFT);
+	BLANK();
+	DEFINE(_PTRS_PER_PGD, PTRS_PER_PGD);
+	DEFINE(_PTRS_PER_PTE, PTRS_PER_PTE);
+	BLANK();
+}
+
+void output_sc_defines(void)
+{
+	COMMENT("Linux sigcontext offsets.");
+	OFFSET(SC_REGS, sigcontext, sc_regs);
+	OFFSET(SC_MDCEH, sigcontext, sc_mdceh);
+	OFFSET(SC_MDCEL, sigcontext, sc_mdcel);
+	OFFSET(SC_PC, sigcontext, sc_pc);
+	OFFSET(SC_PSR, sigcontext, sc_psr);
+	OFFSET(SC_ECR, sigcontext, sc_ecr);
+	OFFSET(SC_EMA, sigcontext, sc_ema);
+	BLANK();
+}
+
+void output_signal_defined(void)
+{
+	COMMENT("Linux signal numbers.");
+	DEFINE(_SIGHUP, SIGHUP);
+	DEFINE(_SIGINT, SIGINT);
+	DEFINE(_SIGQUIT, SIGQUIT);
+	DEFINE(_SIGILL, SIGILL);
+	DEFINE(_SIGTRAP, SIGTRAP);
+	DEFINE(_SIGIOT, SIGIOT);
+	DEFINE(_SIGABRT, SIGABRT);
+	DEFINE(_SIGFPE, SIGFPE);
+	DEFINE(_SIGKILL, SIGKILL);
+	DEFINE(_SIGBUS, SIGBUS);
+	DEFINE(_SIGSEGV, SIGSEGV);
+	DEFINE(_SIGSYS, SIGSYS);
+	DEFINE(_SIGPIPE, SIGPIPE);
+	DEFINE(_SIGALRM, SIGALRM);
+	DEFINE(_SIGTERM, SIGTERM);
+	DEFINE(_SIGUSR1, SIGUSR1);
+	DEFINE(_SIGUSR2, SIGUSR2);
+	DEFINE(_SIGCHLD, SIGCHLD);
+	DEFINE(_SIGPWR, SIGPWR);
+	DEFINE(_SIGWINCH, SIGWINCH);
+	DEFINE(_SIGURG, SIGURG);
+	DEFINE(_SIGIO, SIGIO);
+	DEFINE(_SIGSTOP, SIGSTOP);
+	DEFINE(_SIGTSTP, SIGTSTP);
+	DEFINE(_SIGCONT, SIGCONT);
+	DEFINE(_SIGTTIN, SIGTTIN);
+	DEFINE(_SIGTTOU, SIGTTOU);
+	DEFINE(_SIGVTALRM, SIGVTALRM);
+	DEFINE(_SIGPROF, SIGPROF);
+	DEFINE(_SIGXCPU, SIGXCPU);
+	DEFINE(_SIGXFSZ, SIGXFSZ);
+	BLANK();
+}
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
new file mode 100644
index 00000000000..6c6b7ea58af
--- /dev/null
+++ b/arch/score/kernel/entry.S
@@ -0,0 +1,542 @@
+/*
+ * arch/score/kernel/entry.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/asmmacro.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+
+/*
+ * disable interrupts.
+ */
+.macro	disable_irq
+	mfcr	r8, cr0
+	srli	r8, r8, 1
+	slli	r8, r8, 1
+	mtcr	r8, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/*
+ * enable interrupts.
+ */
+.macro	enable_irq
+	mfcr	r8, cr0
+	ori	r8, 1
+	mtcr	r8, cr0
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+__INIT
+ENTRY(debug_exception_vector)
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+
+ENTRY(general_exception_vector)			# should move to addr 0x200
+	j	general_exception
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+
+ENTRY(interrupt_exception_vector)		# should move to addr 0x210
+	j	interrupt_exception
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+	nop!
+
+	.section ".text", "ax"
+	.align	2;
+general_exception:
+	mfcr	r31, cr2
+	nop
+	la	r30, exception_handlers
+	andi	r31, 0x1f			# get ecr.exc_code
+	slli	r31, r31, 2
+	add	r30, r30, r31
+	lw	r30, [r30]
+	br	r30
+
+interrupt_exception:
+	SAVE_ALL
+	mfcr	r4, cr2
+	nop
+	lw	r16, [r28, TI_REGS]
+	sw	r0, [r28, TI_REGS]
+	la	r3, ret_from_irq
+	srli	r4, r4, 18			# get ecr.ip[7:2], interrupt No.
+	mv	r5, r0
+	j	do_IRQ
+
+ENTRY(handle_nmi)				# NMI #1
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, nmi_exception_handler
+	brl	r8
+	j	restore_all
+
+ENTRY(handle_adelinsn)				# AdEL-instruction #2
+	SAVE_ALL
+	mfcr	r8, cr6
+	nop
+	nop
+	sw	r8, [r0, PT_EMA]
+	mv	r4, r0
+	la	r8, do_adelinsn
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_ibe)				# BusEL-instruction #5
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_be
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_pel)				# P-EL #6
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_pel
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_ccu)				# CCU #8
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_ccu
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_ri)				# RI #9
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_ri
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_tr)				# Trap #10
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_tr
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_adedata)				# AdES-instruction #12
+	SAVE_ALL
+	mfcr	r8, cr6
+	nop
+	nop
+	sw	r8, [r0, PT_EMA]
+	mv	r4, r0
+	la	r8, do_adedata
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_cee)				# CeE #16
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_cee
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_cpe)				# CpE #17
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_cpe
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_dbe)				# BusEL-data #18
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_be
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+ENTRY(handle_reserved)				# others
+	SAVE_ALL
+	mv	r4, r0
+	la	r8, do_reserved
+	brl	r8
+	mv	r4, r0
+	j	ret_from_exception
+	nop
+
+#ifndef CONFIG_PREEMPT
+#define resume_kernel	restore_all
+#else
+#define __ret_from_irq	ret_from_exception
+#endif
+
+	.align	2
+#ifndef CONFIG_PREEMPT
+ENTRY(ret_from_exception)
+	disable_irq			# preempt stop
+	nop
+	j	__ret_from_irq
+	nop
+#endif
+
+ENTRY(ret_from_irq)
+	sw	r16, [r28, TI_REGS]
+
+ENTRY(__ret_from_irq)
+	lw	r8, [r0, PT_PSR]	# returning to kernel mode?
+	andri.c	r8, r8, KU_USER
+	beq	resume_kernel
+
+resume_userspace:
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]	# current->work
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r8, r6		# ignoring syscall_trace
+	bne	work_pending
+	nop
+	j	restore_all
+	nop
+
+#ifdef CONFIG_PREEMPT
+resume_kernel:
+	disable_irq
+	lw	r8, [r28, TI_PRE_COUNT]
+	cmpz.c	r8
+	bne	r8, restore_all
+need_resched:
+	lw	r8, [r28, TI_FLAGS]
+	andri.c	r9, r8, _TIF_NEED_RESCHED
+	beq	restore_all
+	lw	r8, [r28, PT_PSR]		# Interrupts off?
+	andri.c	r8, r8, 1
+	beq	restore_all
+	bl	preempt_schedule_irq
+	nop
+	j	need_resched
+	nop
+#endif
+
+ENTRY(ret_from_fork)
+	bl	schedule_tail			# r4=struct task_struct *prev
+
+ENTRY(syscall_exit)
+	nop
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]		# current->work
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r6, r8
+	bne	syscall_exit_work
+
+ENTRY(restore_all)					# restore full frame
+	RESTORE_ALL_AND_RET
+
+work_pending:
+	andri.c	r8, r6, _TIF_NEED_RESCHED # r6 is preloaded with TI_FLAGS
+	beq	work_notifysig
+work_resched:
+	bl	schedule
+	nop
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r6, r8	# is there any work to be done
+				# other than syscall tracing?
+	beq	restore_all
+	andri.c	r8, r6, _TIF_NEED_RESCHED
+	bne	work_resched
+
+work_notifysig:
+	mv	r4, r0
+	li	r5, 0
+	bl	do_notify_resume	# r6 already loaded
+	nop
+	j	resume_userspace
+	nop
+
+ENTRY(syscall_exit_work)
+	li	r8, _TIF_SYSCALL_TRACE
+	and.c	r8, r8, r6		# r6 is preloaded with TI_FLAGS
+	beq	work_pending		# trace bit set?
+	nop
+	enable_irq
+	mv	r4, r0
+	li	r5, 1
+	bl	do_syscall_trace
+	nop
+	b	resume_userspace
+	nop
+
+.macro	save_context	reg
+	sw	r12, [\reg, THREAD_REG12];
+	sw	r13, [\reg, THREAD_REG13];
+	sw	r14, [\reg, THREAD_REG14];
+	sw	r15, [\reg, THREAD_REG15];
+	sw	r16, [\reg, THREAD_REG16];
+	sw	r17, [\reg, THREAD_REG17];
+	sw	r18, [\reg, THREAD_REG18];
+	sw	r19, [\reg, THREAD_REG19];
+	sw	r20, [\reg, THREAD_REG20];
+	sw	r21, [\reg, THREAD_REG21];
+	sw	r29, [\reg, THREAD_REG29];
+	sw	r2, [\reg, THREAD_REG2];
+	sw	r0, [\reg, THREAD_REG0]
+.endm
+
+.macro	restore_context	reg
+	lw	r12, [\reg, THREAD_REG12];
+	lw	r13, [\reg, THREAD_REG13];
+	lw	r14, [\reg, THREAD_REG14];
+	lw	r15, [\reg, THREAD_REG15];
+	lw	r16, [\reg, THREAD_REG16];
+	lw	r17, [\reg, THREAD_REG17];
+	lw	r18, [\reg, THREAD_REG18];
+	lw	r19, [\reg, THREAD_REG19];
+	lw	r20, [\reg, THREAD_REG20];
+	lw	r21, [\reg, THREAD_REG21];
+	lw	r29, [\reg, THREAD_REG29];
+	lw	r0, [\reg, THREAD_REG0];
+	lw	r2, [\reg, THREAD_REG2];
+	lw	r3, [\reg, THREAD_REG3]
+.endm
+
+/*
+ * task_struct *resume(task_struct *prev, task_struct *next,
+ *			struct thread_info *next_ti)
+ */
+ENTRY(resume)
+	mfcr	r9, cr0
+	nop
+	nop
+	sw	r9, [r4, THREAD_PSR]
+	save_context	r4
+	sw	r3, [r4, THREAD_REG3]
+
+	mv	r28, r6
+	restore_context	r5
+	mv	r8, r6
+	addi	r8, KERNEL_STACK_SIZE
+	subi	r8, 32
+	la 	r9, kernelsp;
+	sw 	r8, [r9];
+
+	mfcr	r9, cr0
+	ldis	r7, 0x00ff
+	nop
+	and	r9, r9, r7
+	lw	r6, [r5, THREAD_PSR]
+	not	r7, r7
+	and	r6, r6, r7
+	or	r6, r6, r9
+	mtcr	r6, cr0
+	nop; nop; nop; nop; nop
+	br	r3
+
+ENTRY(handle_sys)
+	SAVE_ALL
+	enable_irq
+
+	sw	r4, [r0, PT_ORIG_R4]	#for restart syscall
+	sw	r7, [r0, PT_ORIG_R7]	#for restart syscall
+	sw	r27, [r0, PT_IS_SYSCALL] # it from syscall
+
+	lw	r9, [r0, PT_EPC]	# skip syscall on return
+	addi	r9, 4
+	sw	r9, [r0, PT_EPC]
+
+	cmpi.c	r27, __NR_syscalls 	# check syscall number
+	bgtu	illegal_syscall
+
+	slli	r8, r27, 3		# get syscall routine
+	la	r11, sys_call_table
+	add	r11, r11, r8
+	lw	r10, [r11]		# get syscall entry
+	lw	r11, [r11, 4]		# get number of args
+
+	cmpz.c	r10
+	beq	illegal_syscall
+
+	cmpi.c	r11, 4			# more than 4 arguments?
+	bgtu	stackargs
+
+stack_done:
+	lw	r8, [r28, TI_FLAGS]
+	li	r9, _TIF_SYSCALL_TRACE
+	and.c	r8, r8, r9
+	bne	syscall_trace_entry
+
+	brl	r10			# Do The Real system call
+
+	cmpi.c	r4, 0
+	blt	1f
+	ldi	r8, 0
+	sw	r8, [r0, PT_R7]
+	b 2f
+1:
+	cmpi.c	r4, -EMAXERRNO-1	# -EMAXERRNO - 1=-1134
+	ble	2f
+	ldi	r8, 0x1;
+	sw	r8, [r0, PT_R7]
+	neg	r4, r4
+2:
+	sw	r4, [r0, PT_R4]		# save result
+
+syscall_return:
+	disable_irq
+	lw	r6, [r28, TI_FLAGS]	# current->work
+	li	r8, _TIF_WORK_MASK
+	and.c	r8, r6, r8
+	bne	syscall_return_work
+	j	restore_all
+
+syscall_return_work:
+	j	syscall_exit_work
+
+syscall_trace_entry:
+	mv	r16, r10
+	mv	r4, r0
+	li	r5, 0
+	bl	do_syscall_trace
+
+	mv	r8, r16
+	lw	r4, [r0, PT_R4]		# Restore argument registers
+	lw	r5, [r0, PT_R5]
+	lw	r6, [r0, PT_R6]
+	lw	r7, [r0, PT_R7]
+	brl	r8
+
+	li	r8, -EMAXERRNO - 1	# error?
+	sw	r8, [r0, PT_R7]		# set error flag
+
+	neg	r4, r4			# error
+	sw	r4, [r0, PT_R0]		# set flag for syscall
+					# restarting
+1:	sw	r4, [r0, PT_R2]		# result
+	j	syscall_exit
+
+stackargs:
+	lw	r8, [r0, PT_R0]
+	andri.c	r9, r8, 3		# test whether user sp is align a word
+	bne	bad_stack
+	subi	r11, 5
+	slli	r9, r11, 2
+	add.c	r9, r9, r8
+
+	bmi	bad_stack
+	la	r9, 3f			# calculate branch address
+	slli	r11, r11, 3
+	sub	r9, r9, r11
+	br	r9
+
+2:	lw	r9, [r8, 20]		# argument 6 from usp
+	sw	r9, [r0, 20]
+
+3:	lw	r9, [r8, 16]		# argument 5 from usp
+	sw	r9, [r0, 16]
+	j	stack_done
+
+	.section __ex_table,"a"
+	.word	2b, bad_stack
+	.word	3b, bad_stack
+	.previous
+
+	/*
+	 * The stackpointer for a call with more than 4 arguments is bad.
+	 * We probably should handle this case a bit more drastic.
+	 */
+bad_stack:
+	neg	r27, r27		# error
+	sw	r27, [r0, PT_ORIG_R4]
+	sw	r27, [r0, PT_R4]
+	ldi	r8, 1			# set error flag
+	sw	r8, [r0, PT_R7]
+	j	syscall_return
+
+illegal_syscall:
+	ldi	r4, -ENOSYS		# error
+	sw	r4, [r0, PT_ORIG_R4]
+	sw	r4, [r0, PT_R4]
+	ldi	r9, 1			# set error flag
+	sw	r9, [r0, PT_R7]
+	j	syscall_return
+
+ENTRY(sys_execve)
+	mv	r4, r0
+	la	r8, score_execve
+	br	r8
+
+ENTRY(sys_clone)
+	mv	r4, r0
+	la	r8, score_clone
+	br	r8
+
+ENTRY(sys_rt_sigreturn)
+	mv	r4, r0
+	la	r8, score_rt_sigreturn
+	br	r8
+
+ENTRY(sys_sigaltstack)
+	mv	r4, r0
+	la	r8, score_sigaltstack
+	br	r8
diff --git a/arch/score/kernel/head.S b/arch/score/kernel/head.S
new file mode 100644
index 00000000000..22a7e3c7292
--- /dev/null
+++ b/arch/score/kernel/head.S
@@ -0,0 +1,70 @@
+/*
+ * arch/score/kernel/head.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+
+	.extern start_kernel
+	.global init_thread_union
+	.global	kernelsp
+
+__INIT
+ENTRY(_stext)
+	la	r30, __bss_start	/* initialize BSS segment. */
+	la	r31, _end
+	xor	r8, r8, r8
+
+1:	cmp.c	r31, r30
+	beq	2f
+
+	sw	r8, [r30]		/* clean memory. */
+	addi	r30, 4
+	b	1b
+
+2:	la	r28, init_thread_union	/* set kernel stack. */
+	mv	r0, r28
+	addi	r0, KERNEL_STACK_SIZE - 32
+	la	r30, kernelsp
+	sw	r0, [r30]
+	subi	r0, 4*4
+	xor	r30, r30, r30
+	ori	r30, 0x02		/* enable MMU. */
+	mtcr	r30, cr4
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* there is no parameter */
+	xor	r4, r4, r4
+	xor	r5, r5, r5
+	xor	r6, r6, r6
+	xor	r7, r7, r7
+	la	r30, start_kernel	/* jump to init_arch */
+	br	r30
diff --git a/arch/score/kernel/init_task.c b/arch/score/kernel/init_task.c
new file mode 100644
index 00000000000..9eecde00932
--- /dev/null
+++ b/arch/score/kernel/init_task.c
@@ -0,0 +1,49 @@
+/*
+ * arch/score/kernel/init_task.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+	__attribute__((__section__(".data.init_task"))) =
+		{ INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
diff --git a/arch/score/kernel/irq.c b/arch/score/kernel/irq.c
new file mode 100644
index 00000000000..55474e8e972
--- /dev/null
+++ b/arch/score/kernel/irq.c
@@ -0,0 +1,135 @@
+/*
+ * arch/score/kernel/irq.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+
+#include <asm/io.h>
+
+/*
+ * handles all normal device IRQs
+ */
+asmlinkage void do_IRQ(int irq)
+{
+	irq_enter();
+	generic_handle_irq(irq);
+	irq_exit();
+}
+
+static void score_mask(unsigned int irq_nr)
+{
+	unsigned int irq_source = 63 - irq_nr;
+
+	if (irq_source < 32)
+		__raw_writel((__raw_readl((void *)P_INT_MASKL) | \
+			(1 << irq_source)), (void *)P_INT_MASKL);
+	else
+		__raw_writel((__raw_readl((void *)P_INT_MASKH) | \
+			(1 << (irq_source - 32))), (void *)P_INT_MASKH);
+}
+
+static void score_unmask(unsigned int irq_nr)
+{
+	unsigned int irq_source = 63 - irq_nr;
+
+	if (irq_source < 32)
+		__raw_writel((__raw_readl((void *)P_INT_MASKL) & \
+			~(1 << irq_source)), (void *)P_INT_MASKL);
+	else
+		__raw_writel((__raw_readl((void *)P_INT_MASKH) & \
+			~(1 << (irq_source - 32))), (void *)P_INT_MASKH);
+}
+
+struct irq_chip score_irq_chip = {
+	.name		= "Score7-level",
+	.mask		= score_mask,
+	.mask_ack	= score_mask,
+	.unmask		= score_unmask,
+};
+
+/*
+ * initialise the interrupt system
+ */
+void __init init_IRQ(void)
+{
+	int index;
+	unsigned long target_addr;
+
+	for (index = 0; index < NR_IRQS; ++index)
+		set_irq_chip_and_handler(index, &score_irq_chip,
+					 handle_level_irq);
+
+	for (target_addr = IRQ_VECTOR_BASE_ADDR;
+		target_addr <= IRQ_VECTOR_END_ADDR;
+		target_addr += IRQ_VECTOR_SIZE)
+		memcpy((void *)target_addr, \
+			interrupt_exception_vector, IRQ_VECTOR_SIZE);
+
+	__raw_writel(0xffffffff, (void *)P_INT_MASKL);
+	__raw_writel(0xffffffff, (void *)P_INT_MASKH);
+
+	__asm__ __volatile__(
+		"mtcr	%0, cr3\n\t"
+		: : "r" (EXCEPTION_VECTOR_BASE_ADDR | \
+			VECTOR_ADDRESS_OFFSET_MODE16));
+}
+
+/*
+ * Generic, controller-independent functions:
+ */
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *)v, cpu;
+	struct irqaction *action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_puts(p, "           ");
+		for_each_online_cpu(cpu)
+			seq_printf(p, "CPU%d       ", cpu);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if (!action)
+			goto unlock;
+
+		seq_printf(p, "%3d: ", i);
+		seq_printf(p, "%10u ", kstat_irqs(i));
+		seq_printf(p, " %8s", irq_desc[i].chip->name ? : "-");
+		seq_printf(p, "  %s", action->name);
+		for (action = action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+
+		seq_putc(p, '\n');
+unlock:
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	}
+
+	return 0;
+}
diff --git a/arch/score/kernel/module.c b/arch/score/kernel/module.c
new file mode 100644
index 00000000000..4ffce7fe156
--- /dev/null
+++ b/arch/score/kernel/module.c
@@ -0,0 +1,164 @@
+/*
+ * arch/score/kernel/module.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+
+void *module_alloc(unsigned long size)
+{
+	return size ? vmalloc(size) : NULL;
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
+			char *secstrings, struct module *mod)
+{
+	return 0;
+}
+
+int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
+		unsigned int symindex, unsigned int relindex,
+		struct module *me)
+{
+	Elf32_Shdr *symsec = sechdrs + symindex;
+	Elf32_Shdr *relsec = sechdrs + relindex;
+	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
+	Elf32_Rel *rel = (void *)relsec->sh_addr;
+	unsigned int i;
+
+	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
+		unsigned long loc;
+		Elf32_Sym *sym;
+		s32 offset;
+
+		offset = ELF32_R_SYM(rel->r_info);
+		if ((offset < 0) ||
+		    (offset > (symsec->sh_size / sizeof(Elf32_Sym)))) {
+			printk(KERN_ERR "%s: bad relocation, section %d reloc %d\n",
+				me->name, relindex, i);
+				return -ENOEXEC;
+		}
+
+		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
+
+		if ((rel->r_offset < 0) ||
+		    (rel->r_offset > dstsec->sh_size - sizeof(u32))) {
+			printk(KERN_ERR "%s: out of bounds relocation, "
+				"section %d reloc %d offset %d size %d\n",
+				me->name, relindex, i, rel->r_offset,
+				dstsec->sh_size);
+			return -ENOEXEC;
+		}
+
+		loc = dstsec->sh_addr + rel->r_offset;
+		switch (ELF32_R_TYPE(rel->r_info)) {
+		case R_SCORE_NONE:
+			break;
+		case R_SCORE_ABS32:
+			*(unsigned long *)loc += sym->st_value;
+			break;
+		case R_SCORE_HI16:
+			break;
+		case R_SCORE_LO16: {
+			unsigned long hi16_offset, offset;
+			unsigned long uvalue;
+			unsigned long temp, temp_hi;
+			temp_hi = *((unsigned long *)loc - 1);
+			temp = *(unsigned long *)loc;
+
+			hi16_offset = (((((temp_hi) >> 16) & 0x3) << 15) |
+					((temp_hi) & 0x7fff)) >> 1;
+			offset = ((temp >> 16 & 0x03) << 15) |
+					((temp & 0x7fff) >> 1);
+			offset = (hi16_offset << 16) | (offset & 0xffff);
+			uvalue = sym->st_value + offset;
+			hi16_offset = (uvalue >> 16) << 1;
+
+			temp_hi = ((temp_hi) & (~(0x37fff))) |
+					(hi16_offset & 0x7fff) |
+					((hi16_offset << 1) & 0x30000);
+			*((unsigned long *)loc - 1) = temp_hi;
+
+			offset = (uvalue & 0xffff) << 1;
+			temp = (temp & (~(0x37fff))) | (offset & 0x7fff) |
+				((offset << 1) & 0x30000);
+			*(unsigned long *)loc = temp;
+			break;
+		}
+		case R_SCORE_24: {
+			unsigned long hi16_offset, offset;
+			unsigned long uvalue;
+			unsigned long temp;
+
+			temp = *(unsigned long *)loc;
+			offset = (temp & 0x03FF7FFE);
+			hi16_offset = (offset & 0xFFFF0000);
+			offset = (hi16_offset | ((offset & 0xFFFF) << 1)) >> 2;
+
+			uvalue = (sym->st_value + offset) >> 1;
+			uvalue = uvalue & 0x00ffffff;
+
+			temp = (temp & 0xfc008001) |
+				((uvalue << 2) & 0x3ff0000) |
+				((uvalue & 0x3fff) << 1);
+			*(unsigned long *)loc = temp;
+			break;
+		}
+		default:
+			printk(KERN_ERR "%s: unknown relocation: %u\n",
+				me->name, ELF32_R_TYPE(rel->r_info));
+			return -ENOEXEC;
+		}
+	}
+
+	return 0;
+}
+
+int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
+		unsigned int symindex, unsigned int relsec,
+		struct module *me)
+{
+	return 0;
+}
+
+/* Given an address, look for it in the module exception tables. */
+const struct exception_table_entry *search_module_dbetables(unsigned long addr)
+{
+	return 0;
+}
+
+/* Put in dbe list if necessary. */
+int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+		struct module *me)
+{
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod) {}
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
new file mode 100644
index 00000000000..aaa3085251f
--- /dev/null
+++ b/arch/score/kernel/process.c
@@ -0,0 +1,165 @@
+/*
+ * arch/score/kernel/process.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/* If or when software machine-restart is implemented, add code here. */
+void machine_restart(char *command) {}
+
+/* If or when software machine-halt is implemented, add code here. */
+void machine_halt(void) {}
+
+/* If or when software machine-power-off is implemented, add code here. */
+void machine_power_off(void) {}
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void __noreturn cpu_idle(void)
+{
+	/* endless idle loop with no priority at all */
+	while (1) {
+		while (!need_resched())
+			barrier();
+
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
+}
+
+asmlinkage void ret_from_fork(void);
+
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
+{
+	unsigned long status;
+
+	/* New thread loses kernel privileges. */
+	status = regs->cp0_psr & ~(KU_MASK);
+	status |= KU_USER;
+	regs->cp0_psr = status;
+	regs->cp0_epc = pc;
+	regs->regs[0] = sp;
+}
+
+void exit_thread(void) {}
+
+/*
+ * When a process does an "exec", machine state like FPU and debug
+ * registers need to be reset.  This is a hook function for that.
+ * Currently we don't have any such state to reset, so this is empty.
+ */
+void flush_thread(void) {}
+
+/*
+ * set up the kernel stack and exception frames for a new process
+ */
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long unused,
+		struct task_struct *p, struct pt_regs *regs)
+{
+	struct thread_info *ti = task_thread_info(p);
+	struct pt_regs *childregs = task_pt_regs(p);
+
+	p->set_child_tid = NULL;
+	p->clear_child_tid = NULL;
+
+	*childregs = *regs;
+	childregs->regs[7] = 0;		/* Clear error flag */
+	childregs->regs[4] = 0;		/* Child gets zero as return value */
+	regs->regs[4] = p->pid;
+
+	if (childregs->cp0_psr & 0x8) {	/* test kernel fork or user fork */
+		childregs->regs[0] = usp;		/* user fork */
+	} else {
+		childregs->regs[28] = (unsigned long) ti; /* kernel fork */
+		childregs->regs[0] = (unsigned long) childregs;
+	}
+
+	p->thread.reg0 = (unsigned long) childregs;
+	p->thread.reg3 = (unsigned long) ret_from_fork;
+	p->thread.cp0_psr = 0;
+
+	return 0;
+}
+
+/* Fill in the fpu structure for a core dump. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r)
+{
+	return 1;
+}
+
+static void __noreturn
+kernel_thread_helper(void *unused0, int (*fn)(void *),
+		 void *arg, void *unused1)
+{
+	do_exit(fn(arg));
+}
+
+/*
+ * Create a kernel thread.
+ */
+long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+
+	regs.regs[6] = (unsigned long) arg;
+	regs.regs[5] = (unsigned long) fn;
+	regs.cp0_epc = (unsigned long) kernel_thread_helper;
+	regs.cp0_psr = (regs.cp0_psr & ~(0x1|0x4|0x8)) | \
+			((regs.cp0_psr & 0x3) << 2);
+
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, \
+			0, &regs, 0, NULL, NULL);
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	return task_pt_regs(tsk)->cp0_epc;
+}
+
+unsigned long get_wchan(struct task_struct *task)
+{
+	if (!task || task == current || task->state == TASK_RUNNING)
+		return 0;
+
+	if (!task_stack_page(task))
+		return 0;
+
+	return task_pt_regs(task)->cp0_epc;
+}
+
+unsigned long arch_align_stack(unsigned long sp)
+{
+	return sp;
+}
diff --git a/arch/score/kernel/ptrace.c b/arch/score/kernel/ptrace.c
new file mode 100644
index 00000000000..8fe7209355a
--- /dev/null
+++ b/arch/score/kernel/ptrace.c
@@ -0,0 +1,465 @@
+/*
+ * arch/score/kernel/ptrace.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+#include <asm/uaccess.h>
+
+static int is_16bitinsn(unsigned long insn)
+{
+	if ((insn & INSN32_MASK) == INSN32_MASK)
+		return 0;
+	else
+		return 1;
+}
+
+int
+read_tsk_long(struct task_struct *child,
+		unsigned long addr, unsigned long *res)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, res, sizeof(*res), 0);
+
+	return copied != sizeof(*res) ? -EIO : 0;
+}
+
+int
+read_tsk_short(struct task_struct *child,
+		unsigned long addr, unsigned short *res)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, res, sizeof(*res), 0);
+
+	return copied != sizeof(*res) ? -EIO : 0;
+}
+
+static int
+write_tsk_short(struct task_struct *child,
+		unsigned long addr, unsigned short val)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, &val, sizeof(val), 1);
+
+	return copied != sizeof(val) ? -EIO : 0;
+}
+
+static int
+write_tsk_long(struct task_struct *child,
+		unsigned long addr, unsigned long val)
+{
+	int copied;
+
+	copied = access_process_vm(child, addr, &val, sizeof(val), 1);
+
+	return copied != sizeof(val) ? -EIO : 0;
+}
+
+void set_single_step(struct task_struct *child)
+{
+	/* far_epc is the target of branch */
+	unsigned int epc, far_epc = 0;
+	unsigned long epc_insn, far_epc_insn;
+	int ninsn_type;			/* next insn type 0=16b, 1=32b */
+	unsigned int tmp, tmp2;
+	struct pt_regs *regs = task_pt_regs(child);
+	child->thread.single_step = 1;
+	child->thread.ss_nextcnt = 1;
+	epc = regs->cp0_epc;
+
+	read_tsk_long(child, epc, &epc_insn);
+
+	if (is_16bitinsn(epc_insn)) {
+		if ((epc_insn & J16M) == J16) {
+			tmp = epc_insn & 0xFFE;
+			epc = (epc & 0xFFFFF000) | tmp;
+		} else if ((epc_insn & B16M) == B16) {
+			child->thread.ss_nextcnt = 2;
+			tmp = (epc_insn & 0xFF) << 1;
+			tmp = tmp << 23;
+			tmp = (unsigned int)((int) tmp >> 23);
+			far_epc = epc + tmp;
+			epc += 2;
+		} else if ((epc_insn & BR16M) == BR16) {
+			child->thread.ss_nextcnt = 2;
+			tmp = (epc_insn >> 4) & 0xF;
+			far_epc = regs->regs[tmp];
+			epc += 2;
+		} else
+			epc += 2;
+	} else {
+		if ((epc_insn & J32M) == J32) {
+			tmp = epc_insn & 0x03FFFFFE;
+			tmp2 = tmp & 0x7FFF;
+			tmp = (((tmp >> 16) & 0x3FF) << 15) | tmp2;
+			epc = (epc & 0xFFC00000) | tmp;
+		} else if ((epc_insn & B32M) == B32) {
+			child->thread.ss_nextcnt = 2;
+			tmp = epc_insn & 0x03FFFFFE;	/* discard LK bit */
+			tmp2 = tmp & 0x3FF;
+			tmp = (((tmp >> 16) & 0x3FF) << 10) | tmp2; /* 20bit */
+			tmp = tmp << 12;
+			tmp = (unsigned int)((int) tmp >> 12);
+			far_epc = epc + tmp;
+			epc += 4;
+		} else if ((epc_insn & BR32M) == BR32) {
+			child->thread.ss_nextcnt = 2;
+			tmp = (epc_insn >> 16) & 0x1F;
+			far_epc = regs->regs[tmp];
+			epc += 4;
+		} else
+			epc += 4;
+	}
+
+	if (child->thread.ss_nextcnt == 1) {
+		read_tsk_long(child, epc, &epc_insn);
+
+		if (is_16bitinsn(epc_insn)) {
+			write_tsk_short(child, epc, SINGLESTEP16_INSN);
+			ninsn_type = 0;
+		} else {
+			write_tsk_long(child, epc, SINGLESTEP32_INSN);
+			ninsn_type = 1;
+		}
+
+		if (ninsn_type == 0) {  /* 16bits */
+			child->thread.insn1_type = 0;
+			child->thread.addr1 = epc;
+			 /* the insn may have 32bit data */
+			child->thread.insn1 = (short)epc_insn;
+		} else {
+			child->thread.insn1_type = 1;
+			child->thread.addr1 = epc;
+			child->thread.insn1 = epc_insn;
+		}
+	} else {
+		/* branch! have two target child->thread.ss_nextcnt=2 */
+		read_tsk_long(child, epc, &epc_insn);
+		read_tsk_long(child, far_epc, &far_epc_insn);
+		if (is_16bitinsn(epc_insn)) {
+			write_tsk_short(child, epc, SINGLESTEP16_INSN);
+			ninsn_type = 0;
+		} else {
+			write_tsk_long(child, epc, SINGLESTEP32_INSN);
+			ninsn_type = 1;
+		}
+
+		if (ninsn_type == 0) {  /* 16bits */
+			child->thread.insn1_type = 0;
+			child->thread.addr1 = epc;
+			 /* the insn may have 32bit data */
+			child->thread.insn1 = (short)epc_insn;
+		} else {
+			child->thread.insn1_type = 1;
+			child->thread.addr1 = epc;
+			child->thread.insn1 = epc_insn;
+		}
+
+		if (is_16bitinsn(far_epc_insn)) {
+			write_tsk_short(child, far_epc, SINGLESTEP16_INSN);
+			ninsn_type = 0;
+		} else {
+			write_tsk_long(child, far_epc, SINGLESTEP32_INSN);
+			ninsn_type = 1;
+		}
+
+		if (ninsn_type == 0) {  /* 16bits */
+			child->thread.insn2_type = 0;
+			child->thread.addr2 = far_epc;
+			 /* the insn may have 32bit data */
+			child->thread.insn2 = (short)far_epc_insn;
+		} else {
+			child->thread.insn2_type = 1;
+			child->thread.addr2 = far_epc;
+			child->thread.insn2 = far_epc_insn;
+		}
+	}
+}
+
+void clear_single_step(struct task_struct *child)
+{
+	if (child->thread.insn1_type == 0)
+		write_tsk_short(child, child->thread.addr1,
+				child->thread.insn1);
+
+	if (child->thread.insn1_type == 1)
+		write_tsk_long(child, child->thread.addr1,
+				child->thread.insn1);
+
+	if (child->thread.ss_nextcnt == 2) {	/* branch */
+		if (child->thread.insn1_type == 0)
+			write_tsk_short(child, child->thread.addr1,
+					child->thread.insn1);
+		if (child->thread.insn1_type == 1)
+			write_tsk_long(child, child->thread.addr1,
+					child->thread.insn1);
+		if (child->thread.insn2_type == 0)
+			write_tsk_short(child, child->thread.addr2,
+					child->thread.insn2);
+		if (child->thread.insn2_type == 1)
+			write_tsk_long(child, child->thread.addr2,
+					child->thread.insn2);
+	}
+
+	child->thread.single_step = 0;
+	child->thread.ss_nextcnt = 0;
+}
+
+
+void ptrace_disable(struct task_struct *child) {}
+
+long
+arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+	int ret;
+
+	if (request == PTRACE_TRACEME) {
+		/* are we already being traced? */
+		if (current->ptrace & PT_PTRACED)
+			return -EPERM;
+
+		/* set the ptrace bit in the process flags. */
+		current->ptrace |= PT_PTRACED;
+		return 0;
+	}
+
+	ret = -ESRCH;
+	if (!child)
+		return ret;
+
+	ret = -EPERM;
+
+	if (request == PTRACE_ATTACH) {
+		ret = ptrace_attach(child);
+		return ret;
+	}
+
+	ret = ptrace_check_attach(child, request == PTRACE_KILL);
+	if (ret < 0)
+		return ret;
+
+	switch (request) {
+	case PTRACE_PEEKTEXT: /* read word at location addr. */
+	case PTRACE_PEEKDATA: {
+		unsigned long tmp;
+		int copied;
+
+		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+		ret = -EIO;
+		if (copied != sizeof(tmp))
+			break;
+
+		ret = put_user(tmp, (unsigned long *) data);
+		return ret;
+	}
+
+	/* Read the word at location addr in the USER area.  */
+	case PTRACE_PEEKUSR: {
+		struct pt_regs *regs;
+		unsigned long tmp;
+
+		regs = task_pt_regs(child);
+
+		tmp = 0;  /* Default return value. */
+		switch (addr) {
+		case 0 ... 31:
+			tmp = regs->regs[addr];
+			break;
+		case PC:
+			tmp = regs->cp0_epc;
+			break;
+		case ECR:
+			tmp = regs->cp0_ecr;
+			break;
+		case EMA:
+			tmp = regs->cp0_ema;
+			break;
+		case CEH:
+			tmp = regs->ceh;
+			break;
+		case CEL:
+			tmp = regs->cel;
+			break;
+		case CONDITION:
+			tmp = regs->cp0_condition;
+			break;
+		case PSR:
+			tmp = regs->cp0_psr;
+			break;
+		case COUNTER:
+			tmp = regs->sr0;
+			break;
+		case LDCR:
+			tmp = regs->sr1;
+			break;
+		case STCR:
+			tmp = regs->sr2;
+			break;
+		default:
+			tmp = 0;
+			return -EIO;
+		}
+
+		ret = put_user(tmp, (unsigned long *) data);
+		return ret;
+	}
+
+	case PTRACE_POKETEXT: /* write the word at location addr. */
+	case PTRACE_POKEDATA:
+		ret = 0;
+		if (access_process_vm(child, addr, &data, sizeof(data), 1)
+			== sizeof(data))
+			break;
+		ret = -EIO;
+		return ret;
+
+	case PTRACE_POKEUSR: {
+		struct pt_regs *regs;
+		ret = 0;
+		regs = task_pt_regs(child);
+
+		switch (addr) {
+		case 0 ... 31:
+			regs->regs[addr] = data;
+			break;
+		case PC:
+			regs->cp0_epc = data;
+			break;
+		case CEH:
+			regs->ceh = data;
+			break;
+		case CEL:
+			regs->cel = data;
+			break;
+		case CONDITION:
+			regs->cp0_condition = data;
+			break;
+		case PSR:
+		case COUNTER:
+		case STCR:
+		case LDCR:
+			break; /* user can't write the reg */
+		default:
+			/* The rest are not allowed. */
+			ret = -EIO;
+			break;
+		}
+		break;
+	}
+
+	case PTRACE_SYSCALL: /* continue and stop at next
+				(return from) syscall. */
+	case PTRACE_CONT: { /* restart after signal. */
+		ret = -EIO;
+		if (!valid_signal(data))
+			break;
+		if (request == PTRACE_SYSCALL)
+			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		else
+			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+		child->exit_code = data;
+		wake_up_process(child);
+		ret = 0;
+		break;
+	}
+
+	/*
+	 * make the child exit.  Best I can do is send it a sigkill.
+	 * perhaps it should be put in the status that it wants to
+	 * exit.
+	 */
+	case PTRACE_KILL:
+		ret = 0;
+		if (child->state == EXIT_ZOMBIE)	/* already dead. */
+			break;
+		child->exit_code = SIGKILL;
+		clear_single_step(child);
+		wake_up_process(child);
+		break;
+
+	case PTRACE_SINGLESTEP: {		/* set the trap flag. */
+		ret = -EIO;
+		if ((unsigned long) data > _NSIG)
+			break;
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+		set_single_step(child);
+		child->exit_code = data;
+		/* give it a chance to run. */
+		wake_up_process(child);
+		ret = 0;
+		break;
+	}
+
+	case PTRACE_DETACH: /* detach a process that was attached. */
+		ret = ptrace_detach(child, data);
+		break;
+
+	case PTRACE_SETOPTIONS:
+		if (data & PTRACE_O_TRACESYSGOOD)
+			child->ptrace |= PT_TRACESYSGOOD;
+		else
+			child->ptrace &= ~PT_TRACESYSGOOD;
+		ret = 0;
+		break;
+
+	default:
+		ret = -EIO;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	/* The 0x80 provides a way for the tracing parent to distinguish
+	   between a syscall stop and SIGTRAP delivery. */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
+			0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c
new file mode 100644
index 00000000000..a172ce170f6
--- /dev/null
+++ b/arch/score/kernel/setup.c
@@ -0,0 +1,157 @@
+/*
+ * arch/score/kernel/setup.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/bootmem.h>
+#include <linux/initrd.h>
+#include <linux/ioport.h>
+#include <linux/seq_file.h>
+#include <linux/screen_info.h>
+
+#include <asm-generic/sections.h>
+
+struct screen_info screen_info;
+unsigned long kernelsp;
+
+static char command_line[COMMAND_LINE_SIZE];
+static struct resource code_resource = { .name = "Kernel code",};
+static struct resource data_resource = { .name = "Kernel data",};
+
+static void __init bootmem_init(void)
+{
+	unsigned long reserved_end, bootmap_size;
+	unsigned long size = initrd_end - initrd_start;
+
+	reserved_end = (unsigned long)_end;
+
+	min_low_pfn = 0;
+	max_low_pfn = MEM_SIZE / PAGE_SIZE;
+
+	/* Initialize the boot-time allocator with low memory only. */
+	bootmap_size = init_bootmem_node(NODE_DATA(0), reserved_end,
+					 min_low_pfn, max_low_pfn);
+	add_active_range(0, min_low_pfn, max_low_pfn);
+
+	free_bootmem(PFN_PHYS(reserved_end),
+		     (max_low_pfn - reserved_end) << PAGE_SHIFT);
+	memory_present(0, reserved_end, max_low_pfn);
+
+	/* Reserve space for the bootmem bitmap. */
+	reserve_bootmem(PFN_PHYS(reserved_end), bootmap_size, BOOTMEM_DEFAULT);
+
+	if (size == 0) {
+		printk(KERN_INFO "Initrd not found or empty");
+		goto disable;
+	}
+
+	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
+		printk(KERN_ERR "Initrd extends beyond end of memory");
+		goto disable;
+	}
+
+	/* Reserve space for the initrd bitmap. */
+	reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
+	initrd_below_start_ok = 1;
+
+	pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		 initrd_start, size);
+	return;
+disable:
+	printk(KERN_CONT " - disabling initrd\n");
+	initrd_start = 0;
+	initrd_end = 0;
+}
+
+static void __init resource_init(void)
+{
+	struct resource *res;
+
+	code_resource.start = (unsigned long)_text;
+	code_resource.end = (unsigned long)_etext - 1;
+	data_resource.start = (unsigned long)_etext;
+	data_resource.end = (unsigned long)_edata - 1;
+
+	res = alloc_bootmem(sizeof(struct resource));
+	res->name = "System RAM";
+	res->start = 0;
+	res->end = MEM_SIZE - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	request_resource(&iomem_resource, res);
+
+	request_resource(res, &code_resource);
+	request_resource(res, &data_resource);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+	randomize_va_space = 0;
+	*cmdline_p = command_line;
+
+	cpu_cache_init();
+	tlb_init();
+	bootmem_init();
+	paging_init();
+	resource_init();
+}
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long n = (unsigned long) v - 1;
+
+	seq_printf(m, "processor\t\t: %ld\n", n);
+	seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	unsigned long i = *pos;
+
+	return i < 1 ? (void *) (i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+
+static int __init topology_init(void)
+{
+	return 0;
+}
+
+subsys_initcall(topology_init);
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
new file mode 100644
index 00000000000..b4ed1b3f807
--- /dev/null
+++ b/arch/score/kernel/signal.c
@@ -0,0 +1,355 @@
+/*
+ * arch/score/kernel/signal.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+#include <linux/uaccess.h>
+#include <asm-generic/ucontext.h>
+
+#include <asm/cacheflush.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+struct rt_sigframe {
+	u32 rs_ass[4];		/* argument save space */
+	u32 rs_code[2];		/* signal trampoline */
+	struct siginfo rs_info;
+	struct ucontext rs_uc;
+};
+
+int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	unsigned long reg;
+
+	reg = regs->cp0_epc; err |= __put_user(reg, &sc->sc_pc);
+	err |= __put_user(regs->cp0_psr, &sc->sc_psr);
+	err |= __put_user(regs->cp0_condition, &sc->sc_condition);
+
+
+#define save_gp_reg(i) {				\
+	reg = regs->regs[i];				\
+	err |= __put_user(reg, &sc->sc_regs[i]);	\
+} while (0)
+	save_gp_reg(0); save_gp_reg(1); save_gp_reg(2);
+	save_gp_reg(3); save_gp_reg(4); save_gp_reg(5);
+	save_gp_reg(6);	save_gp_reg(7); save_gp_reg(8);
+	save_gp_reg(9); save_gp_reg(10); save_gp_reg(11);
+	save_gp_reg(12); save_gp_reg(13); save_gp_reg(14);
+	save_gp_reg(15); save_gp_reg(16); save_gp_reg(17);
+	save_gp_reg(18); save_gp_reg(19); save_gp_reg(20);
+	save_gp_reg(21); save_gp_reg(22); save_gp_reg(23);
+	save_gp_reg(24); save_gp_reg(25); save_gp_reg(26);
+	save_gp_reg(27); save_gp_reg(28); save_gp_reg(29);
+#undef save_gp_reg
+
+	reg = regs->ceh; err |= __put_user(reg, &sc->sc_mdceh);
+	reg = regs->cel; err |= __put_user(reg, &sc->sc_mdcel);
+	err |= __put_user(regs->cp0_ecr, &sc->sc_ecr);
+	err |= __put_user(regs->cp0_ema, &sc->sc_ema);
+
+	return err;
+}
+
+int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	u32 reg;
+
+	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+	err |= __get_user(regs->cp0_condition, &sc->sc_condition);
+
+	err |= __get_user(reg, &sc->sc_mdceh);
+	regs->ceh = (int) reg;
+	err |= __get_user(reg, &sc->sc_mdcel);
+	regs->cel = (int) reg;
+
+	err |= __get_user(reg, &sc->sc_psr);
+	regs->cp0_psr = (int) reg;
+	err |= __get_user(reg, &sc->sc_ecr);
+	regs->cp0_ecr = (int) reg;
+	err |= __get_user(reg, &sc->sc_ema);
+	regs->cp0_ema = (int) reg;
+
+#define restore_gp_reg(i) do {				\
+	err |= __get_user(reg, &sc->sc_regs[i]);	\
+	regs->regs[i] = reg;				\
+} while (0)
+	restore_gp_reg(0); restore_gp_reg(1); restore_gp_reg(2);
+	restore_gp_reg(3); restore_gp_reg(4); restore_gp_reg(5);
+	restore_gp_reg(6); restore_gp_reg(7); restore_gp_reg(8);
+	restore_gp_reg(9); restore_gp_reg(10); restore_gp_reg(11);
+	restore_gp_reg(12); restore_gp_reg(13); restore_gp_reg(14);
+	restore_gp_reg(15); restore_gp_reg(16); restore_gp_reg(17);
+	restore_gp_reg(18); restore_gp_reg(19);	restore_gp_reg(20);
+	restore_gp_reg(21); restore_gp_reg(22); restore_gp_reg(23);
+	restore_gp_reg(24); restore_gp_reg(25); restore_gp_reg(26);
+	restore_gp_reg(27); restore_gp_reg(28); restore_gp_reg(29);
+#undef restore_gp_reg
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
+			size_t frame_size)
+{
+	unsigned long sp;
+
+	/* Default to using normal stack */
+	sp = regs->regs[0];
+	sp -= 32;
+
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if ((ka->sa.sa_flags & SA_ONSTACK) && (!on_sig_stack(sp)))
+		sp = current->sas_ss_sp + current->sas_ss_size;
+
+	return (void *)((sp - frame_size) & ~7);
+}
+
+asmlinkage int score_sigaltstack(struct pt_regs *regs)
+{
+	const stack_t *uss = (const stack_t *) regs->regs[4];
+	stack_t *uoss = (stack_t *) regs->regs[5];
+	unsigned long usp = regs->regs[0];
+
+	return do_sigaltstack(uss, uoss, usp);
+}
+
+asmlinkage void score_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame;
+	sigset_t set;
+	stack_t st;
+	int sig;
+
+	frame = (struct rt_sigframe __user *) regs->regs[0];
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	sig = restore_sigcontext(regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
+
+	if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
+		goto badframe;
+
+	/* It is more difficult to avoid calling this function than to
+	   call it and ignore errors.  */
+	do_sigaltstack((stack_t __user *)&st, NULL, regs->regs[0]);
+
+	__asm__ __volatile__(
+		"mv\tr0, %0\n\t"
+		"la\tr8, syscall_exit\n\t"
+		"br\tr8\n\t"
+		: : "r" (regs) : "r8");
+
+badframe:
+	force_sig(SIGSEGV, current);
+}
+
+int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
+		int signr, sigset_t *set, siginfo_t *info)
+{
+	struct rt_sigframe *frame;
+	int err = 0;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	/*
+	 * Set up the return code ...
+	 *
+	 *         li      v0, __NR_rt_sigreturn
+	 *         syscall
+	 */
+	err |= __put_user(0x87788000 + __NR_rt_sigreturn*2,
+			frame->rs_code + 0);
+	err |= __put_user(0x80008002, frame->rs_code + 1);
+	flush_cache_sigtramp((unsigned long) frame->rs_code);
+
+	err |= copy_siginfo_to_user(&frame->rs_info, info);
+	err |= __put_user(0, &frame->rs_uc.uc_flags);
+	err |= __put_user(0, &frame->rs_uc.uc_link);
+	err |= __put_user((void *)current->sas_ss_sp,
+				&frame->rs_uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->regs[0]),
+				&frame->rs_uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size,
+				&frame->rs_uc.uc_stack.ss_size);
+	err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext);
+	err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set));
+
+	if (err)
+		goto give_sigsegv;
+
+	regs->regs[0] = (unsigned long) frame;
+	regs->regs[3] = (unsigned long) frame->rs_code;
+	regs->regs[4] = signr;
+	regs->regs[5] = (unsigned long) &frame->rs_info;
+	regs->regs[6] = (unsigned long) &frame->rs_uc;
+	regs->regs[29] = (unsigned long) ka->sa.sa_handler;
+	regs->cp0_epc = (unsigned long) ka->sa.sa_handler;
+
+	return 0;
+
+give_sigsegv:
+	if (signr == SIGSEGV)
+		ka->sa.sa_handler = SIG_DFL;
+	force_sig(SIGSEGV, current);
+	return -EFAULT;
+}
+
+int handle_signal(unsigned long sig, siginfo_t *info,
+	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
+{
+	int ret;
+
+	if (regs->is_syscall) {
+		switch (regs->regs[4]) {
+		case ERESTART_RESTARTBLOCK:
+		case ERESTARTNOHAND:
+			regs->regs[4] = EINTR;
+			break;
+		case ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
+				regs->regs[4] = EINTR;
+				break;
+			}
+		case ERESTARTNOINTR:
+			regs->regs[4] = regs->orig_r4;
+			regs->regs[7] = regs->orig_r7;
+			regs->cp0_epc -= 8;
+		}
+
+		regs->is_syscall = 0;
+	}
+
+	/*
+	 * Set up the stack frame
+	 */
+	ret = setup_rt_frame(ka, regs, sig, oldset, info);
+
+	spin_lock_irq(&current->sighand->siglock);
+	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&current->blocked, sig);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	return ret;
+}
+
+asmlinkage void do_signal(struct pt_regs *regs)
+{
+	struct k_sigaction ka;
+	sigset_t *oldset;
+	siginfo_t info;
+	int signr;
+
+	/*
+	 * We want the common case to go fast, which is why we may in certain
+	 * cases get here from kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+	if (signr > 0) {
+		/* Actually deliver the signal.  */
+		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
+
+		return;
+	}
+
+	if (regs->is_syscall) {
+		if (regs->regs[4] == ERESTARTNOHAND ||
+		    regs->regs[4] == ERESTARTSYS ||
+		    regs->regs[4] == ERESTARTNOINTR) {
+			regs->regs[4] = regs->orig_r4;
+			regs->regs[7] = regs->orig_r7;
+			regs->cp0_epc -= 8;
+		}
+
+		if (regs->regs[4] == ERESTART_RESTARTBLOCK) {
+			regs->regs[27] = __NR_restart_syscall;
+			regs->regs[4] = regs->orig_r4;
+			regs->regs[7] = regs->orig_r7;
+			regs->cp0_epc -= 8;
+		}
+
+		regs->is_syscall = 0;	/* Don't deal with this again.  */
+	}
+
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back
+	 */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
+				__u32 thread_info_flags)
+{
+	/* deal with pending signal delivery */
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs);
+}
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
new file mode 100644
index 00000000000..6a60d1ee533
--- /dev/null
+++ b/arch/score/kernel/sys_score.c
@@ -0,0 +1,147 @@
+/*
+ * arch/score/kernel/syscall.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <linux/unistd.h>
+
+unsigned long shm_align_mask = PAGE_SIZE - 1;
+EXPORT_SYMBOL(shm_align_mask);
+
+asmlinkage unsigned long
+sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
+	  unsigned long flags, unsigned long fd, unsigned long pgoff)
+{
+	int error = -EBADF;
+	struct file *file = NULL;
+
+	if (pgoff & (~PAGE_MASK >> 12))
+		return -EINVAL;
+
+	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+	if (!(flags & MAP_ANONYMOUS)) {
+		file = fget(fd);
+		if (!file)
+			return error;
+	}
+
+	down_write(&current->mm->mmap_sem);
+	error = do_mmap_pgoff(file, addr, len, prot, flags,
+			pgoff >> (PAGE_SHIFT - 12));
+	up_write(&current->mm->mmap_sem);
+
+	if (file)
+		fput(file);
+
+	return error;
+}
+
+/*
+ * Clone a task - this clones the calling program thread.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage int
+score_clone(struct pt_regs *regs)
+{
+	unsigned long clone_flags;
+	unsigned long newsp;
+	int __user *parent_tidptr, *child_tidptr;
+
+	clone_flags = regs->regs[4];
+	newsp = regs->regs[5];
+	if (!newsp)
+		newsp = regs->regs[0];
+	parent_tidptr = (int __user *)regs->regs[6];
+
+	child_tidptr = NULL;
+	if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) {
+		int __user *__user *usp = (int __user *__user *)regs->regs[0];
+
+		if (get_user(child_tidptr, &usp[4]))
+			return -EFAULT;
+	}
+
+	return do_fork(clone_flags, newsp, regs, 0,
+			parent_tidptr, child_tidptr);
+}
+
+/*
+ * sys_execve() executes a new program.
+ * This is called indirectly via a small wrapper
+ */
+asmlinkage int score_execve(struct pt_regs *regs)
+{
+	int error;
+	char *filename;
+
+	filename = getname((char *) (long) regs->regs[4]);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		return error;
+
+	error = do_execve(filename, (char **) (long) regs->regs[5],
+			  (char **) (long) regs->regs[6], regs);
+
+	putname(filename);
+	return error;
+}
+
+/*
+ * If we ever come here the user sp is bad.  Zap the process right away.
+ * Due to the bad stack signaling wouldn't work.
+ */
+asmlinkage void bad_stack(void)
+{
+	do_exit(SIGSEGV);
+}
+
+/*
+ * Do a system call from kernel instead of calling sys_execve so we
+ * end up with proper pt_regs.
+ */
+int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+{
+	register unsigned long __r4 asm("r4") = (unsigned long) filename;
+	register unsigned long __r5 asm("r5") = (unsigned long) argv;
+	register unsigned long __r6 asm("r6") = (unsigned long) envp;
+	register unsigned long __r7 asm("r7");
+
+	__asm__ __volatile__ ("	\n"
+		"ldi	r27, %5		\n"
+		"syscall		\n"
+		"mv	%0, r4		\n"
+		"mv	%1, r7		\n"
+		: "=&r" (__r4), "=r" (__r7)
+		: "r" (__r4), "r" (__r5), "r" (__r6), "i" (__NR_execve)
+		: "r8", "r9", "r10", "r11", "r22", "r23", "r24", "r25",
+		  "r26", "r27", "memory");
+
+	if (__r7 == 0)
+		return __r4;
+
+	return -__r4;
+}
diff --git a/arch/score/kernel/time.c b/arch/score/kernel/time.c
new file mode 100644
index 00000000000..cd66ba327ca
--- /dev/null
+++ b/arch/score/kernel/time.c
@@ -0,0 +1,99 @@
+/*
+ * arch/score/kernel/time.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+
+#include <asm/scoreregs.h>
+
+irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evdev = dev_id;
+
+	/* clear timer interrupt flag */
+	outl(1, P_TIMER0_CPP_REG);
+	evdev->event_handler(evdev);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction timer_irq = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.name = "timer",
+};
+
+static int score_timer_set_next_event(unsigned long delta,
+		struct clock_event_device *evdev)
+{
+	outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
+	outl(delta, P_TIMER0_PRELOAD);
+	outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
+
+	return 0;
+}
+
+static void score_timer_set_mode(enum clock_event_mode mode,
+		struct clock_event_device *evdev)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		outl((TMR_M_PERIODIC | TMR_IE_ENABLE), P_TIMER0_CTRL);
+		outl(SYSTEM_CLOCK/HZ, P_TIMER0_PRELOAD);
+		outl(inl(P_TIMER0_CTRL) | TMR_ENABLE, P_TIMER0_CTRL);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_UNUSED:
+		break;
+	default:
+		BUG();
+	}
+}
+
+static struct clock_event_device score_clockevent = {
+	.name		= "score_clockevent",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 16,
+	.set_next_event	= score_timer_set_next_event,
+	.set_mode	= score_timer_set_mode,
+};
+
+void __init time_init(void)
+{
+	timer_irq.dev_id = &score_clockevent;
+	setup_irq(IRQ_TIMER , &timer_irq);
+
+	/* setup COMPARE clockevent */
+	score_clockevent.mult = div_sc(SYSTEM_CLOCK, NSEC_PER_SEC,
+					score_clockevent.shift);
+	score_clockevent.max_delta_ns = clockevent_delta2ns((u32)~0,
+					&score_clockevent);
+	score_clockevent.min_delta_ns = clockevent_delta2ns(50,
+						&score_clockevent) + 1;
+	score_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&score_clockevent);
+}
diff --git a/arch/score/kernel/traps.c b/arch/score/kernel/traps.c
new file mode 100644
index 00000000000..957ae9eb356
--- /dev/null
+++ b/arch/score/kernel/traps.c
@@ -0,0 +1,349 @@
+/*
+ * arch/score/kernel/traps.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#include <asm/cacheflush.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+
+unsigned long exception_handlers[32];
+
+/*
+ * The architecture-independent show_stack generator
+ */
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+	int i;
+	long stackdata;
+
+	sp = sp ? sp : (unsigned long *)&sp;
+
+	printk(KERN_NOTICE "Stack: ");
+	i = 1;
+	while ((long) sp & (PAGE_SIZE - 1)) {
+		if (i && ((i % 8) == 0))
+			printk(KERN_NOTICE "\n");
+		if (i > 40) {
+			printk(KERN_NOTICE " ...");
+			break;
+		}
+
+		if (__get_user(stackdata, sp++)) {
+			printk(KERN_NOTICE " (Bad stack address)");
+			break;
+		}
+
+		printk(KERN_NOTICE " %08lx", stackdata);
+		i++;
+	}
+	printk(KERN_NOTICE "\n");
+}
+
+static void show_trace(long *sp)
+{
+	int i;
+	long addr;
+
+	sp = sp ? sp : (long *) &sp;
+
+	printk(KERN_NOTICE "Call Trace:  ");
+	i = 1;
+	while ((long) sp & (PAGE_SIZE - 1)) {
+		if (__get_user(addr, sp++)) {
+			if (i && ((i % 6) == 0))
+				printk(KERN_NOTICE "\n");
+			printk(KERN_NOTICE " (Bad stack address)\n");
+			break;
+		}
+
+		if (kernel_text_address(addr)) {
+			if (i && ((i % 6) == 0))
+				printk(KERN_NOTICE "\n");
+			if (i > 40) {
+				printk(KERN_NOTICE " ...");
+				break;
+			}
+
+			printk(KERN_NOTICE " [<%08lx>]", addr);
+			i++;
+		}
+	}
+	printk(KERN_NOTICE "\n");
+}
+
+static void show_code(unsigned int *pc)
+{
+	long i;
+
+	printk(KERN_NOTICE "\nCode:");
+
+	for (i = -3; i < 6; i++) {
+		unsigned long insn;
+		if (__get_user(insn, pc + i)) {
+			printk(KERN_NOTICE " (Bad address in epc)\n");
+			break;
+		}
+		printk(KERN_NOTICE "%c%08lx%c", (i ? ' ' : '<'),
+			insn, (i ? ' ' : '>'));
+	}
+}
+
+/*
+ * FIXME: really the generic show_regs should take a const pointer argument.
+ */
+void show_regs(struct pt_regs *regs)
+{
+	printk("r0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[0], regs->regs[1], regs->regs[2], regs->regs[3],
+		regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
+	printk("r8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[8], regs->regs[9], regs->regs[10], regs->regs[11],
+		regs->regs[12], regs->regs[13], regs->regs[14], regs->regs[15]);
+	printk("r16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[16], regs->regs[17], regs->regs[18], regs->regs[19],
+		regs->regs[20], regs->regs[21], regs->regs[22], regs->regs[23]);
+	printk("r24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
+		regs->regs[24], regs->regs[25], regs->regs[26], regs->regs[27],
+		regs->regs[28], regs->regs[29], regs->regs[30], regs->regs[31]);
+
+	printk("CEH : %08lx\n", regs->ceh);
+	printk("CEL : %08lx\n", regs->cel);
+
+	printk("EMA:%08lx, epc:%08lx %s\nPSR: %08lx\nECR:%08lx\nCondition : %08lx\n",
+		regs->cp0_ema, regs->cp0_epc, print_tainted(), regs->cp0_psr,
+		regs->cp0_ecr, regs->cp0_condition);
+}
+
+static void show_registers(struct pt_regs *regs)
+{
+	show_regs(regs);
+	printk(KERN_NOTICE "Process %s (pid: %d, stackpage=%08lx)\n",
+		current->comm, current->pid, (unsigned long) current);
+	show_stack(current_thread_info()->task, (long *) regs->regs[0]);
+	show_trace((long *) regs->regs[0]);
+	show_code((unsigned int *) regs->cp0_epc);
+	printk(KERN_NOTICE "\n");
+}
+
+/*
+ * The architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+	show_stack(current_thread_info()->task,
+		   (long *) get_irq_regs()->regs[0]);
+}
+EXPORT_SYMBOL(dump_stack);
+
+void __die(const char *str, struct pt_regs *regs, const char *file,
+	const char *func, unsigned long line)
+{
+	console_verbose();
+	printk("%s", str);
+	if (file && func)
+		printk(" in %s:%s, line %ld", file, func, line);
+	printk(":\n");
+	show_registers(regs);
+	do_exit(SIGSEGV);
+}
+
+void __die_if_kernel(const char *str, struct pt_regs *regs,
+		const char *file, const char *func, unsigned long line)
+{
+	if (!user_mode(regs))
+		__die(str, regs, file, func, line);
+}
+
+asmlinkage void do_adelinsn(struct pt_regs *regs)
+{
+	printk("do_ADE-linsn:ema:0x%08lx:epc:0x%08lx\n",
+		 regs->cp0_ema, regs->cp0_epc);
+	die_if_kernel("do_ade execution Exception\n", regs);
+	force_sig(SIGBUS, current);
+}
+
+asmlinkage void do_adedata(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+	fixup = search_exception_tables(regs->cp0_epc);
+	if (fixup) {
+		regs->cp0_epc = fixup->fixup;
+		return;
+	}
+	printk("do_ADE-data:ema:0x%08lx:epc:0x%08lx\n",
+		 regs->cp0_ema, regs->cp0_epc);
+	die_if_kernel("do_ade execution Exception\n", regs);
+	force_sig(SIGBUS, current);
+}
+
+asmlinkage void do_pel(struct pt_regs *regs)
+{
+	die_if_kernel("do_pel execution Exception", regs);
+	force_sig(SIGFPE, current);
+}
+
+asmlinkage void do_cee(struct pt_regs *regs)
+{
+	die_if_kernel("do_cee execution Exception", regs);
+	force_sig(SIGFPE, current);
+}
+
+asmlinkage void do_cpe(struct pt_regs *regs)
+{
+	die_if_kernel("do_cpe execution Exception", regs);
+	force_sig(SIGFPE, current);
+}
+
+asmlinkage void do_be(struct pt_regs *regs)
+{
+	die_if_kernel("do_be execution Exception", regs);
+	force_sig(SIGBUS, current);
+}
+
+asmlinkage void do_ov(struct pt_regs *regs)
+{
+	siginfo_t info;
+
+	die_if_kernel("do_ov execution Exception", regs);
+
+	info.si_code = FPE_INTOVF;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_addr = (void *)regs->cp0_epc;
+	force_sig_info(SIGFPE, &info, current);
+}
+
+asmlinkage void do_tr(struct pt_regs *regs)
+{
+	die_if_kernel("do_tr execution Exception", regs);
+	force_sig(SIGTRAP, current);
+}
+
+asmlinkage void do_ri(struct pt_regs *regs)
+{
+	unsigned long epc_insn;
+	unsigned long epc = regs->cp0_epc;
+
+	read_tsk_long(current, epc, &epc_insn);
+	if (current->thread.single_step == 1) {
+		if ((epc == current->thread.addr1) ||
+		    (epc == current->thread.addr2)) {
+			clear_single_step(current);
+			force_sig(SIGTRAP, current);
+			return;
+		} else
+			BUG();
+	} else if ((epc_insn == BREAKPOINT32_INSN) ||
+		   ((epc_insn & 0x0000FFFF) == 0x7002) ||
+		   ((epc_insn & 0xFFFF0000) == 0x70020000)) {
+			force_sig(SIGTRAP, current);
+			return;
+	} else {
+		die_if_kernel("do_ri execution Exception", regs);
+		force_sig(SIGILL, current);
+	}
+}
+
+asmlinkage void do_ccu(struct pt_regs *regs)
+{
+	die_if_kernel("do_ccu execution Exception", regs);
+	force_sig(SIGILL, current);
+}
+
+asmlinkage void do_reserved(struct pt_regs *regs)
+{
+	/*
+	 * Game over - no way to handle this if it ever occurs.  Most probably
+	 * caused by a new unknown cpu type or after another deadly
+	 * hard/software error.
+	 */
+	die_if_kernel("do_reserved execution Exception", regs);
+	show_regs(regs);
+	panic("Caught reserved exception - should not happen.");
+}
+
+/*
+ * NMI exception handler.
+ */
+void nmi_exception_handler(struct pt_regs *regs)
+{
+	die_if_kernel("nmi_exception_handler execution Exception", regs);
+	die("NMI", regs);
+}
+
+/* Install CPU exception handler */
+void *set_except_vector(int n, void *addr)
+{
+	unsigned long handler = (unsigned long) addr;
+	unsigned long old_handler = exception_handlers[n];
+
+	exception_handlers[n] = handler;
+	return (void *)old_handler;
+}
+
+void __init trap_init(void)
+{
+	int i;
+
+	pgd_current = (unsigned long)init_mm.pgd;
+	/* DEBUG EXCEPTION */
+	memcpy((void *)DEBUG_VECTOR_BASE_ADDR,
+			&debug_exception_vector, DEBUG_VECTOR_SIZE);
+	/* NMI EXCEPTION */
+	memcpy((void *)GENERAL_VECTOR_BASE_ADDR,
+			&general_exception_vector, GENERAL_VECTOR_SIZE);
+
+	/*
+	 * Initialise exception handlers
+	 */
+	for (i = 0; i <= 31; i++)
+		set_except_vector(i, handle_reserved);
+
+	set_except_vector(1, handle_nmi);
+	set_except_vector(2, handle_adelinsn);
+	set_except_vector(3, handle_tlb_refill);
+	set_except_vector(4, handle_tlb_invaild);
+	set_except_vector(5, handle_ibe);
+	set_except_vector(6, handle_pel);
+	set_except_vector(7, handle_sys);
+	set_except_vector(8, handle_ccu);
+	set_except_vector(9, handle_ri);
+	set_except_vector(10, handle_tr);
+	set_except_vector(11, handle_adedata);
+	set_except_vector(12, handle_adedata);
+	set_except_vector(13, handle_tlb_refill);
+	set_except_vector(14, handle_tlb_invaild);
+	set_except_vector(15, handle_mod);
+	set_except_vector(16, handle_cee);
+	set_except_vector(17, handle_cpe);
+	set_except_vector(18, handle_dbe);
+	flush_icache_range(DEBUG_VECTOR_BASE_ADDR, IRQ_VECTOR_BASE_ADDR);
+
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	cpu_cache_init();
+}
diff --git a/arch/score/kernel/vmlinux.lds.S b/arch/score/kernel/vmlinux.lds.S
new file mode 100644
index 00000000000..f85569831d5
--- /dev/null
+++ b/arch/score/kernel/vmlinux.lds.S
@@ -0,0 +1,148 @@
+/*
+ * arch/score/kernel/vmlinux.lds.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_ARCH(score)
+ENTRY(_stext)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+	. = CONFIG_MEMORY_START + 0x2000;
+	/* read-only */
+	.text : {
+		_text = .;	/* Text and read-only data */
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		*(.text.*)
+		*(.fixup)
+		. = ALIGN (4) ;
+		_etext = .;	/* End of text section */
+	}
+
+	. = ALIGN(16);
+	RODATA
+
+	/* Exception table */
+	. = ALIGN(16);
+	__ex_table : {
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+	}
+
+	/* writeable */
+	.data ALIGN (4096): {
+		*(.data.init_task)
+
+		DATA_DATA
+		CONSTRUCTORS
+	}
+
+	/* We want the small data sections together, so single-instruction offsets
+	   can access them all, and initialized data all before uninitialized, so
+	   we can shorten the on-disk segment size.  */
+	. = ALIGN(8);
+	.sdata : {
+		*(.sdata)
+	}
+
+	. = ALIGN(32);
+	.data.cacheline_aligned : {
+		*(.data.cacheline_aligned)
+	}
+	_edata =  .;			/* End of data section */
+
+	/* will be freed after init */
+	. = ALIGN(4096);		/* Init code and data */
+	__init_begin = .;
+
+	. = ALIGN(4096);
+	.init.text : {
+		_sinittext = .;
+		INIT_TEXT
+		_einittext = .;
+	}
+	.init.data : {
+		INIT_DATA
+	}
+	. = ALIGN(16);
+	.init.setup : {
+		__setup_start = .;
+		*(.init.setup)
+		__setup_end = .;
+	}
+
+	.initcall.init : {
+		__initcall_start = .;
+		INITCALLS
+		__initcall_end = .;
+	}
+
+	.con_initcall.init : {
+		__con_initcall_start = .;
+		*(.con_initcall.init)
+		__con_initcall_end = .;
+	}
+	SECURITY_INIT
+
+	/* .exit.text is discarded at runtime, not link time, to deal with
+	 * references from .rodata
+	 */
+	.exit.text : {
+		EXIT_TEXT
+	}
+	.exit.data : {
+		EXIT_DATA
+	}
+#if defined(CONFIG_BLK_DEV_INITRD)
+	.init.ramfs ALIGN(4096): {
+		__initramfs_start = .;
+		*(.init.ramfs)
+		__initramfs_end = .;
+		. = ALIGN(4);
+		LONG(0);
+	}
+#endif
+	. = ALIGN(4096);
+	__init_end = .;
+	/* freed after init ends here */
+
+	__bss_start = .;	/* BSS */
+	.sbss  : {
+		*(.sbss)
+		*(.scommon)
+	}
+	.bss : {
+		*(.bss)
+		*(COMMON)
+	}
+	__bss_stop = .;
+	_end = .;
+}
diff --git a/arch/score/lib/Makefile b/arch/score/lib/Makefile
new file mode 100644
index 00000000000..553e30e81fa
--- /dev/null
+++ b/arch/score/lib/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for SCORE-specific library files..
+#
+
+lib-y += string.o checksum.o checksum_copy.o
+
+# libgcc-style stuff needed in the kernel
+obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/score/lib/ashldi3.c b/arch/score/lib/ashldi3.c
new file mode 100644
index 00000000000..15691a91043
--- /dev/null
+++ b/arch/score/lib/ashldi3.c
@@ -0,0 +1,46 @@
+/*
+ * arch/score/lib/ashldi3.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+long long __ashldi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.low = 0;
+		w.s.high = (unsigned int) uu.s.low << -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.low >> bm;
+
+		w.s.low = (unsigned int) uu.s.low << b;
+		w.s.high = ((unsigned int) uu.s.high << b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashldi3);
diff --git a/arch/score/lib/ashrdi3.c b/arch/score/lib/ashrdi3.c
new file mode 100644
index 00000000000..d9814a5d8d3
--- /dev/null
+++ b/arch/score/lib/ashrdi3.c
@@ -0,0 +1,48 @@
+/*
+ * arch/score/lib/ashrdi3.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+long long __ashrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		/* w.s.high = 1..1 or 0..0 */
+		w.s.high =
+		    uu.s.high >> 31;
+		w.s.low = uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__ashrdi3);
diff --git a/arch/score/lib/checksum.S b/arch/score/lib/checksum.S
new file mode 100644
index 00000000000..706157edc7d
--- /dev/null
+++ b/arch/score/lib/checksum.S
@@ -0,0 +1,255 @@
+/*
+ * arch/score/lib/csum_partial.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/linkage.h>
+
+#define ADDC(sum,reg)			\
+	add	sum, sum, reg;		\
+	cmp.c	reg, sum;		\
+	bleu	9f;			\
+	addi	sum, 0x1;		\
+9:
+
+#define CSUM_BIGCHUNK(src, offset, sum)		\
+	lw	r8, [src, offset + 0x00];	\
+	lw	r9, [src, offset + 0x04];	\
+	lw	r10, [src, offset + 0x08];	\
+	lw	r11, [src, offset + 0x0c];	\
+	ADDC(sum, r8);				\
+	ADDC(sum, r9);				\
+	ADDC(sum, r10);				\
+	ADDC(sum, r11);				\
+	lw	r8, [src, offset + 0x10];	\
+	lw	r9, [src, offset + 0x14];	\
+	lw	r10, [src, offset + 0x18]; 	\
+	lw	r11, [src, offset + 0x1c]; 	\
+	ADDC(sum, r8);				\
+	ADDC(sum, r9);				\
+	ADDC(sum, r10);				\
+	ADDC(sum, r11);				\
+
+#define src r4
+#define dest r5
+#define sum r27
+
+	.text
+/* unknown src alignment and < 8 bytes to go */
+small_csumcpy:
+	mv	r5, r10
+	ldi	r9, 0x0
+	cmpi.c	r25, 0x1
+	beq pass_small_set_t7	/*already set, jump to pass_small_set_t7*/
+	andri.c	r25,r4 , 0x1	/*Is src 2 bytes aligned?*/
+
+pass_small_set_t7:
+	beq	aligned
+	cmpi.c	r5, 0x0
+	beq	fold
+	lbu	r9, [src]
+	slli	r9,r9, 0x8	/*Little endian*/
+	ADDC(sum, r9)
+	addi	src, 0x1
+	subi.c	r5, 0x1
+
+	/*len still a full word */
+aligned:
+	andri.c r8, r5, 0x4	/*Len >= 4?*/
+	beq	len_less_4bytes
+
+	/* Still a full word (4byte) to go,and the src is word aligned.*/
+	andri.c	r8, src, 0x3	/*src is 4bytes aligned, so use LW!!*/
+	beq	four_byte_aligned
+	lhu 	r9, [src]
+	addi	src, 2
+	ADDC(sum, r9)
+	lhu 	r9, [src]
+	addi	src, 2
+	ADDC(sum, r9)
+	b len_less_4bytes
+
+four_byte_aligned:		/* Len >=4 and four byte aligned */
+	lw	r9, [src]
+	addi	src, 4
+	ADDC(sum, r9)
+
+len_less_4bytes:		/* 2 byte aligned aligned and length<4B */
+	andri.c r8, r5, 0x2
+	beq	len_less_2bytes
+	lhu	r9, [src]
+	addi	src, 0x2	/* src+=2 */
+	ADDC(sum, r9)
+
+len_less_2bytes:		/* len = 1 */
+	andri.c r8, r5, 0x1
+	beq 	fold		/* less than 2 and not equal 1--> len=0 -> fold */
+	lbu	r9, [src]
+
+fold_ADDC:
+	ADDC(sum, r9)
+fold:
+	/* fold checksum */
+	slli	r26, sum, 16
+	add	sum, sum, r26
+	cmp.c	r26, sum
+	srli	sum, sum, 16
+	bleu 	1f 		/* if r26<=sum */
+	addi	sum, 0x1 	/* r26>sum */
+1:
+	/* odd buffer alignment? r25 was set in csum_partial */
+	cmpi.c	r25, 0x0
+	beq	1f
+	slli	r26, sum, 8
+	srli	sum, sum, 8
+	or	sum, sum, r26
+	andi	sum, 0xffff
+1:
+	.set	optimize
+	/* Add the passed partial csum. */
+	ADDC(sum, r6)
+	mv	r4, sum
+	br	r3
+	.set	volatile
+
+	.align	5
+ENTRY(csum_partial)
+	ldi sum, 0
+	ldi r25, 0
+	mv r10, r5
+	cmpi.c	r5, 0x8
+	blt	small_csumcpy		/* < 8(singed) bytes to copy */
+	cmpi.c	r5, 0x0
+	beq	out
+	andri.c	r25, src, 0x1		/* odd buffer? */
+
+	beq	word_align
+hword_align:				/* 1 byte */
+	lbu	r8, [src]
+	subi	r5, 0x1
+	slli	r8, r8, 8
+	ADDC(sum, r8)
+	addi	src, 0x1
+
+word_align:				/* 2 bytes */
+	andri.c r8, src, 0x2		/* 4bytes(dword)_aligned? */
+	beq	dword_align		/* not, maybe dword_align */
+	lhu	r8, [src]
+	subi	r5, 0x2
+	ADDC(sum, r8)
+	addi	src, 0x2
+
+dword_align:				/* 4bytes */
+	mv 	r26, r5			/* maybe useless when len >=56 */
+	ldi 	r8, 56
+	cmp.c	r8, r5
+	bgtu	do_end_words		/* if a1(len)<t0(56) ,unsigned */
+	andri.c	r26, src, 0x4
+	beq	qword_align
+	lw	r8, [src]
+	subi	r5, 0x4
+	ADDC(sum, r8)
+	addi	src, 0x4
+
+qword_align:				/* 8 bytes */
+	andri.c r26, src, 0x8
+	beq	oword_align
+	lw	r8, [src, 0x0]
+	lw	r9, [src, 0x4]
+	subi	r5, 0x8			/* len-=0x8 */
+	ADDC(sum, r8)
+	ADDC(sum, r9)
+	addi	src, 0x8
+
+oword_align:				/* 16bytes */
+	andri.c	r26, src, 0x10
+	beq	begin_movement
+	lw	r10, [src, 0x08]
+	lw	r11, [src, 0x0c]
+	lw	r8, [src, 0x00]
+	lw	r9, [src, 0x04]
+	ADDC(sum, r10)
+	ADDC(sum, r11)
+	ADDC(sum, r8)
+	ADDC(sum, r9)
+	subi	r5, 0x10
+	addi	src, 0x10
+
+begin_movement:
+	srli.c	r26, r5, 0x7		/* len>=128? */
+	beq	1f			/* len<128 */
+
+/* r26 is the result that computed in oword_align */
+move_128bytes:
+	CSUM_BIGCHUNK(src, 0x00, sum)
+	CSUM_BIGCHUNK(src, 0x20, sum)
+	CSUM_BIGCHUNK(src, 0x40, sum)
+	CSUM_BIGCHUNK(src, 0x60, sum)
+	subi.c	r26, 0x01		/* r26 equals len/128 */
+	addi	src, 0x80
+	bne	move_128bytes
+
+1:	/* len<128,we process 64byte here */
+	andri.c	r10, r5, 0x40
+	beq	1f
+
+move_64bytes:
+	CSUM_BIGCHUNK(src, 0x00, sum)
+	CSUM_BIGCHUNK(src, 0x20, sum)
+	addi	src, 0x40
+
+1:					/* len<64 */
+	andri	r26, r5, 0x1c		/* 0x1c=28 */
+	andri.c	r10, r5, 0x20
+	beq	do_end_words		/* decided by andri */
+
+move_32bytes:
+	CSUM_BIGCHUNK(src, 0x00, sum)
+	andri	r26, r5, 0x1c
+	addri	src, src, 0x20
+
+do_end_words:				/* len<32 */
+	/* r26 was set already in dword_align */
+	cmpi.c	r26, 0x0
+	beq	maybe_end_cruft		/* len<28 or len<56 */
+	srli	r26, r26, 0x2
+
+end_words:
+	lw	r8, [src]
+	subi.c	r26, 0x1		/* unit is 4 byte */
+	ADDC(sum, r8)
+	addi	src, 0x4
+	cmpi.c	r26, 0x0
+	bne	end_words		/* r26!=0 */
+
+maybe_end_cruft:			/* len<4 */
+	andri	r10, r5, 0x3
+
+small_memcpy:
+	mv	r5, r10
+	j	small_csumcpy
+
+out:
+	mv	r4, sum
+	br	r3
+
+END(csum_partial)
diff --git a/arch/score/lib/checksum_copy.c b/arch/score/lib/checksum_copy.c
new file mode 100644
index 00000000000..04565dd3ded
--- /dev/null
+++ b/arch/score/lib/checksum_copy.c
@@ -0,0 +1,52 @@
+/*
+ * arch/score/lib/csum_partial_copy.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <net/checksum.h>
+
+#include <asm/uaccess.h>
+
+unsigned int csum_partial_copy(const char *src, char *dst,
+				int len, unsigned int sum)
+{
+	sum = csum_partial(src, len, sum);
+	memcpy(dst, src, len);
+
+	return sum;
+}
+
+unsigned int csum_partial_copy_from_user(const char *src, char *dst,
+					int len, unsigned int sum,
+					int *err_ptr)
+{
+	int missing;
+
+	missing = copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*err_ptr = -EFAULT;
+	}
+
+	return csum_partial(dst, len, sum);
+}
diff --git a/arch/score/lib/cmpdi2.c b/arch/score/lib/cmpdi2.c
new file mode 100644
index 00000000000..1ed5290c66e
--- /dev/null
+++ b/arch/score/lib/cmpdi2.c
@@ -0,0 +1,44 @@
+/*
+ * arch/score/lib/cmpdi2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+word_type __cmpdi2(long long a, long long b)
+{
+	const DWunion au = {
+		.ll = a
+	};
+	const DWunion bu = {
+		.ll = b
+	};
+
+	if (au.s.high < bu.s.high)
+		return 0;
+	else if (au.s.high > bu.s.high)
+		return 2;
+
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+
+	return 1;
+}
+EXPORT_SYMBOL(__cmpdi2);
diff --git a/arch/score/lib/libgcc.h b/arch/score/lib/libgcc.h
new file mode 100644
index 00000000000..0f12543d9f3
--- /dev/null
+++ b/arch/score/lib/libgcc.h
@@ -0,0 +1,37 @@
+/*
+ * arch/score/lib/libgcc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DWstruct {
+	int low, high;
+};
+
+typedef union {
+	struct DWstruct s;
+	long long ll;
+} DWunion;
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/score/lib/lshrdi3.c b/arch/score/lib/lshrdi3.c
new file mode 100644
index 00000000000..ce21175fd79
--- /dev/null
+++ b/arch/score/lib/lshrdi3.c
@@ -0,0 +1,47 @@
+/*
+ * arch/score/lib/lshrdi3.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+long long __lshrdi3(long long u, word_type b)
+{
+	DWunion uu, w;
+	word_type bm;
+
+	if (b == 0)
+		return u;
+
+	uu.ll = u;
+	bm = 32 - b;
+
+	if (bm <= 0) {
+		w.s.high = 0;
+		w.s.low = (unsigned int) uu.s.high >> -bm;
+	} else {
+		const unsigned int carries = (unsigned int) uu.s.high << bm;
+
+		w.s.high = (unsigned int) uu.s.high >> b;
+		w.s.low = ((unsigned int) uu.s.low >> b) | carries;
+	}
+
+	return w.ll;
+}
+EXPORT_SYMBOL(__lshrdi3);
diff --git a/arch/score/lib/string.S b/arch/score/lib/string.S
new file mode 100644
index 00000000000..943d0911ea8
--- /dev/null
+++ b/arch/score/lib/string.S
@@ -0,0 +1,196 @@
+/*
+ * arch/score/lib/string.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/linkage.h>
+#include <asm-generic/errno.h>
+
+	.text
+	.align 2
+ENTRY(__strncpy_from_user)
+	cmpi.c	r6, 0
+	mv	r9, r6
+	ble	.L2
+0:	lbu	r7, [r5]
+	ldi	r8, 0
+1:	sb	r7, [r4]
+2:	lb	r6, [r5]
+	cmp.c	r6, r8
+	beq	.L2
+
+.L5:
+	addi	r8, 1
+	cmp.c	r8, r9
+	beq	.L7
+3:	lbu	r6, [r5, 1]+
+4:	sb	r6, [r4, 1]+
+5:	lb	r7, [r5]
+	cmpi.c	r7, 0
+	bne	.L5
+.L7:
+	mv	r4, r8
+	br	r3
+.L2:
+	ldi	r8, 0
+	mv	r4, r8
+	br	r3
+	.section .fixup, "ax"
+99:
+	ldi	r4, -EFAULT
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+	.word	0b ,99b
+	.word	1b ,99b
+	.word	2b ,99b
+	.word	3b ,99b
+	.word	4b ,99b
+	.word	5b ,99b
+	.previous
+
+	.align 2
+ENTRY(__strnlen_user)
+	cmpi.c	r5, 0
+	ble	.L11
+0:	lb	r6, [r4]
+	ldi	r7, 0
+	cmp.c	r6, r7
+	beq	.L11
+.L15:
+	addi	r7, 1
+	cmp.c	r7, r5
+	beq	.L23
+1:	lb	r6, [r4,1]+
+	cmpi.c	r6, 0
+	bne	.L15
+.L23:
+	addri	r4, r7, 1
+	br	r3
+
+.L11:
+	ldi	r4, 1
+	br	r3
+	.section .fixup, "ax"
+99:
+	ldi	r4, 0
+	br	r3
+
+	.section __ex_table,"a"
+	.align 2
+	.word	0b, 99b
+	.word	1b, 99b
+	.previous
+
+	.align 2
+ENTRY(__strlen_user)
+0:	lb	r6, [r4]
+	mv	r7, r4
+	extsb	r6, r6
+	cmpi.c	r6, 0
+	mv	r4, r6
+	beq	.L27
+.L28:
+1:	lb	r6, [r7, 1]+
+	addi	r6, 1
+	cmpi.c	r6, 0
+	bne	.L28
+.L27:
+	br	r3
+	.section .fixup, "ax"
+	ldi	r4, 0x0
+	br	r3
+99:
+	ldi	r4, 0
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+	.word	0b ,99b
+	.word	1b ,99b
+	.previous
+
+	.align 2
+ENTRY(__copy_tofrom_user)
+	cmpi.c	r6, 0
+	mv	r10,r6
+	beq	.L32
+	ldi	r9, 0
+.L34:
+	add	r6, r5, r9
+0:	lbu	r8, [r6]
+	add	r7, r4, r9
+1:	sb	r8, [r7]
+	addi	r9, 1
+	cmp.c	r9, r10
+	bne	.L34
+.L32:
+	ldi	r4, 0
+	br	r3
+	.section .fixup, "ax"
+99:
+	sub	r4, r10, r9
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+	.word	0b, 99b
+	.word	1b, 99b
+	.previous
+
+	.align 2
+ENTRY(__clear_user)
+	cmpi.c	r5, 0
+	beq	.L38
+	ldi	r6, 0
+	mv	r7, r6
+.L40:
+	addi	r6, 1
+0:	sb	r7, [r4]+, 1
+	cmp.c	r6, r5
+	bne	.L40
+.L38:
+	ldi	r4, 0
+	br	r3
+
+	.section .fixup, "ax"
+	br	r3
+	.previous
+	.section __ex_table, "a"
+	.align	2
+99:
+	.word	0b, 99b
+	.previous
+
+	.align	2
+ENTRY(__put_user_unknown)
+	.set volatile
+	ldi	r4, -EFAULT
+	br	r3
+
+	.align	2
+ENTRY(__get_user_unknown)
+	ldi	r5, 0
+	ldi	r4, -EFAULT
+	br	r3
diff --git a/arch/score/lib/ucmpdi2.c b/arch/score/lib/ucmpdi2.c
new file mode 100644
index 00000000000..b15241e0b07
--- /dev/null
+++ b/arch/score/lib/ucmpdi2.c
@@ -0,0 +1,38 @@
+/*
+ * arch/score/lib/ucmpdi2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include "libgcc.h"
+
+word_type __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+	const DWunion au = {.ll = a};
+	const DWunion bu = {.ll = b};
+
+	if ((unsigned int) au.s.high < (unsigned int) bu.s.high)
+		return 0;
+	else if ((unsigned int) au.s.high > (unsigned int) bu.s.high)
+		return 2;
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+	return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/score/mm/Makefile b/arch/score/mm/Makefile
new file mode 100644
index 00000000000..7b1e29b1f8c
--- /dev/null
+++ b/arch/score/mm/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux/SCORE-specific parts of the memory manager.
+#
+
+obj-y += cache.o extable.o fault.o init.o \
+	tlb-miss.o tlb-score.o pgtable.o
diff --git a/arch/score/mm/cache.c b/arch/score/mm/cache.c
new file mode 100644
index 00000000000..1ebc67f18c6
--- /dev/null
+++ b/arch/score/mm/cache.c
@@ -0,0 +1,308 @@
+/*
+ * arch/score/mm/cache.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#include <asm/mmu_context.h>
+
+/* Cache operations. */
+void (*flush_cache_all)(void);
+void (*__flush_cache_all)(void);
+void (*flush_cache_mm)(struct mm_struct *mm);
+void (*flush_cache_range)(struct vm_area_struct *vma,
+			unsigned long start, unsigned long end);
+void (*flush_cache_page)(struct vm_area_struct *vma,
+			unsigned long page, unsigned long pfn);
+void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*__flush_cache_vmap)(void);
+void (*__flush_cache_vunmap)(void);
+void (*flush_cache_sigtramp)(unsigned long addr);
+void (*flush_data_cache_page)(unsigned long addr);
+EXPORT_SYMBOL(flush_data_cache_page);
+void (*flush_icache_all)(void);
+
+/*Score 7 cache operations*/
+static inline void s7___flush_cache_all(void);
+static void s7_flush_cache_mm(struct mm_struct *mm);
+static void s7_flush_cache_range(struct vm_area_struct *vma,
+				unsigned long start, unsigned long end);
+static void s7_flush_cache_page(struct vm_area_struct *vma,
+				unsigned long page, unsigned long pfn);
+static void s7_flush_icache_range(unsigned long start, unsigned long end);
+static void s7_flush_cache_sigtramp(unsigned long addr);
+static void s7_flush_data_cache_page(unsigned long addr);
+static void s7_flush_dcache_range(unsigned long start, unsigned long end);
+
+void __update_cache(struct vm_area_struct *vma, unsigned long address,
+		pte_t pte)
+{
+	struct page *page;
+	unsigned long pfn, addr;
+	int exec = (vma->vm_flags & VM_EXEC);
+
+	pfn = pte_pfn(pte);
+	if (unlikely(!pfn_valid(pfn)))
+		return;
+	page = pfn_to_page(pfn);
+	if (page_mapping(page) && test_bit(PG_arch_1, &page->flags)) {
+		addr = (unsigned long) page_address(page);
+		if (exec)
+			s7_flush_data_cache_page(addr);
+		clear_bit(PG_arch_1, &page->flags);
+	}
+}
+
+static inline void setup_protection_map(void)
+{
+	protection_map[0] = PAGE_NONE;
+	protection_map[1] = PAGE_READONLY;
+	protection_map[2] = PAGE_COPY;
+	protection_map[3] = PAGE_COPY;
+	protection_map[4] = PAGE_READONLY;
+	protection_map[5] = PAGE_READONLY;
+	protection_map[6] = PAGE_COPY;
+	protection_map[7] = PAGE_COPY;
+	protection_map[8] = PAGE_NONE;
+	protection_map[9] = PAGE_READONLY;
+	protection_map[10] = PAGE_SHARED;
+	protection_map[11] = PAGE_SHARED;
+	protection_map[12] = PAGE_READONLY;
+	protection_map[13] = PAGE_READONLY;
+	protection_map[14] = PAGE_SHARED;
+	protection_map[15] = PAGE_SHARED;
+}
+
+void __devinit cpu_cache_init(void)
+{
+	flush_cache_all = s7_flush_cache_all;
+	__flush_cache_all = s7___flush_cache_all;
+	flush_cache_mm = s7_flush_cache_mm;
+	flush_cache_range = s7_flush_cache_range;
+	flush_cache_page = s7_flush_cache_page;
+	flush_icache_range = s7_flush_icache_range;
+	flush_cache_sigtramp = s7_flush_cache_sigtramp;
+	flush_data_cache_page = s7_flush_data_cache_page;
+
+	setup_protection_map();
+}
+
+void s7_flush_icache_all(void)
+{
+	__asm__ __volatile__(
+	"la r8, s7_flush_icache_all\n"
+	"cache 0x10, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	: : : "r8");
+}
+
+void s7_flush_dcache_all(void)
+{
+	__asm__ __volatile__(
+	"la r8, s7_flush_dcache_all\n"
+	"cache 0x1f, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1a, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	: : : "r8");
+}
+
+void s7_flush_cache_all(void)
+{
+	__asm__ __volatile__(
+	"la r8, s7_flush_cache_all\n"
+	"cache 0x10, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1f, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1a, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	: : : "r8");
+}
+
+void s7___flush_cache_all(void)
+{
+	__asm__ __volatile__(
+	"la r8, s7_flush_cache_all\n"
+	"cache 0x10, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1f, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"cache 0x1a, [r8, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	: : : "r8");
+}
+
+static void s7_flush_cache_mm(struct mm_struct *mm)
+{
+	if (!(mm->context))
+		return;
+	s7_flush_cache_all();
+}
+
+/*if we flush a range precisely , the processing may be very long.
+We must check each page in the range whether present. If the page is present,
+we can flush the range in the page. Be careful, the range may be cross two
+page, a page is present and another is not present.
+*/
+/*
+The interface is provided in hopes that the port can find
+a suitably efficient method for removing multiple page
+sized regions from the cache.
+*/
+static void
+s7_flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	int exec = vma->vm_flags & VM_EXEC;
+	pgd_t *pgdp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+	pte_t *ptep;
+
+	if (!(mm->context))
+		return;
+
+	pgdp = pgd_offset(mm, start);
+	pudp = pud_offset(pgdp, start);
+	pmdp = pmd_offset(pudp, start);
+	ptep = pte_offset(pmdp, start);
+
+	while (start <= end) {
+		unsigned long tmpend;
+		pgdp = pgd_offset(mm, start);
+		pudp = pud_offset(pgdp, start);
+		pmdp = pmd_offset(pudp, start);
+		ptep = pte_offset(pmdp, start);
+
+		if (!(pte_val(*ptep) & _PAGE_PRESENT)) {
+			start = (start + PAGE_SIZE) & ~(PAGE_SIZE - 1);
+			continue;
+		}
+		tmpend = (start | (PAGE_SIZE-1)) > end ?
+				 end : (start | (PAGE_SIZE-1));
+
+		s7_flush_dcache_range(start, tmpend);
+		if (exec)
+			s7_flush_icache_range(start, tmpend);
+		start = (start + PAGE_SIZE) & ~(PAGE_SIZE - 1);
+	}
+}
+
+static void
+s7_flush_cache_page(struct vm_area_struct *vma,
+		unsigned long addr, unsigned long pfn)
+{
+	int exec = vma->vm_flags & VM_EXEC;
+	unsigned long kaddr = 0xa0000000 | (pfn << PAGE_SHIFT);
+
+	s7_flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
+
+	if (exec)
+		s7_flush_icache_range(kaddr, kaddr + PAGE_SIZE);
+}
+
+static void s7_flush_cache_sigtramp(unsigned long addr)
+{
+	__asm__ __volatile__(
+	"cache 0x02, [%0, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+	"cache 0x02, [%0, 0x4]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+
+	"cache 0x0d, [%0, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+	"cache 0x0d, [%0, 0x4]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+
+	"cache 0x1a, [%0, 0]\n"
+	"nop\nnop\nnop\nnop\nnop\n"
+	: : "r" (addr));
+}
+
+/*
+Just flush entire Dcache!!
+You must ensure the page doesn't include instructions, because
+the function will not flush the Icache.
+The addr must be cache aligned.
+*/
+static void s7_flush_data_cache_page(unsigned long addr)
+{
+	unsigned int i;
+	for (i = 0; i < (PAGE_SIZE / L1_CACHE_BYTES); i += L1_CACHE_BYTES) {
+		__asm__ __volatile__(
+		"cache 0x0e, [%0, 0]\n"
+		"cache 0x1a, [%0, 0]\n"
+		"nop\n"
+		: : "r" (addr));
+		addr += L1_CACHE_BYTES;
+	}
+}
+
+/*
+1. WB and invalid a cache line of Dcache
+2. Drain Write Buffer
+the range must be smaller than PAGE_SIZE
+*/
+static void s7_flush_dcache_range(unsigned long start, unsigned long end)
+{
+	int size, i;
+
+	start = start & ~(L1_CACHE_BYTES - 1);
+	end = end & ~(L1_CACHE_BYTES - 1);
+	size = end - start;
+	/* flush dcache to ram, and invalidate dcache lines. */
+	for (i = 0; i < size; i += L1_CACHE_BYTES) {
+		__asm__ __volatile__(
+		"cache 0x0e, [%0, 0]\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		"cache 0x1a, [%0, 0]\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (start));
+		start += L1_CACHE_BYTES;
+	}
+}
+
+static void s7_flush_icache_range(unsigned long start, unsigned long end)
+{
+	int size, i;
+	start = start & ~(L1_CACHE_BYTES - 1);
+	end = end & ~(L1_CACHE_BYTES - 1);
+
+	size = end - start;
+	/* invalidate icache lines. */
+	for (i = 0; i < size; i += L1_CACHE_BYTES) {
+		__asm__ __volatile__(
+		"cache 0x02, [%0, 0]\n"
+		"nop\nnop\nnop\nnop\nnop\n"
+		: : "r" (start));
+		start += L1_CACHE_BYTES;
+	}
+}
diff --git a/arch/score/mm/extable.c b/arch/score/mm/extable.c
new file mode 100644
index 00000000000..01ff6445171
--- /dev/null
+++ b/arch/score/mm/extable.c
@@ -0,0 +1,38 @@
+/*
+ * arch/score/mm/extable.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(regs->cp0_epc);
+	if (fixup) {
+		regs->cp0_epc = fixup->fixup;
+		return 1;
+	}
+	return 0;
+}
diff --git a/arch/score/mm/fault.c b/arch/score/mm/fault.c
new file mode 100644
index 00000000000..47b600e4b2c
--- /dev/null
+++ b/arch/score/mm/fault.c
@@ -0,0 +1,235 @@
+/*
+ * arch/score/mm/fault.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
+				unsigned long address)
+{
+	struct vm_area_struct *vma = NULL;
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->mm;
+	const int field = sizeof(unsigned long) * 2;
+	siginfo_t info;
+	int fault;
+
+	info.si_code = SEGV_MAPERR;
+
+	/*
+	* We fault-in kernel-space virtual memory on-demand. The
+	* 'reference' page table is init_mm.pgd.
+	*
+	* NOTE! We MUST NOT take any locks for this case. We may
+	* be in an interrupt or a critical region, and should
+	* only copy the information from the master page table,
+	* nothing more.
+	*/
+	if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
+		goto vmalloc_fault;
+#ifdef MODULE_START
+	if (unlikely(address >= MODULE_START && address < MODULE_END))
+		goto vmalloc_fault;
+#endif
+
+	/*
+	* If we're in an interrupt or have no user
+	* context, we must not take the fault..
+	*/
+	if (in_atomic() || !mm)
+		goto bad_area_nosemaphore;
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
+	if (vma->vm_start <= address)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+	if (expand_stack(vma, address))
+		goto bad_area;
+	/*
+	* Ok, we have a good vm_area for this memory access, so
+	* we can handle it..
+	 */
+good_area:
+	info.si_code = SEGV_ACCERR;
+
+	if (write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	} else {
+		if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)))
+			goto bad_area;
+	}
+
+survive:
+	/*
+	* If for any reason at all we couldn't handle the fault,
+	* make sure we exit gracefully rather than endlessly redo
+	* the fault.
+	*/
+	fault = handle_mm_fault(mm, vma, address, write);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		tsk->maj_flt++;
+	else
+		tsk->min_flt++;
+
+	up_read(&mm->mmap_sem);
+	return;
+
+	/*
+	* Something tried to access memory that isn't in our memory map..
+	* Fix it, but check if it's kernel or user first..
+	 */
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+	/* User mode accesses just cause a SIGSEGV */
+	if (user_mode(regs)) {
+		tsk->thread.cp0_badvaddr = address;
+		tsk->thread.error_code = write;
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		/* info.si_code has been set above */
+		info.si_addr = (void __user *) address;
+		force_sig_info(SIGSEGV, &info, tsk);
+		return;
+	}
+
+no_context:
+	/* Are we prepared to handle this kernel fault? */
+	if (fixup_exception(regs)) {
+		current->thread.cp0_baduaddr = address;
+		return;
+	}
+
+	/*
+	* Oops. The kernel tried to access some bad page. We'll have to
+	* terminate things with extreme prejudice.
+	*/
+	bust_spinlocks(1);
+
+	printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
+			"virtual address %0*lx, epc == %0*lx, ra == %0*lx\n",
+			0, field, address, field, regs->cp0_epc,
+			field, regs->regs[3]);
+	die("Oops", regs);
+
+	/*
+	* We ran out of memory, or some other thing happened to us that made
+	* us unable to handle the page fault gracefully.
+	*/
+out_of_memory:
+	up_read(&mm->mmap_sem);
+	if (is_global_init(tsk)) {
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	printk("VM: killing process %s\n", tsk->comm);
+	if (user_mode(regs))
+		do_group_exit(SIGKILL);
+	goto no_context;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+	/* Kernel mode? Handle exceptions or die */
+	if (!user_mode(regs))
+		goto no_context;
+	else
+	/*
+	* Send a sigbus, regardless of whether we were in kernel
+	* or user mode.
+	*/
+	tsk->thread.cp0_badvaddr = address;
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void __user *) address;
+	force_sig_info(SIGBUS, &info, tsk);
+	return;
+vmalloc_fault:
+	{
+		/*
+		* Synchronize this task's top level page-table
+		* with the 'reference' page table.
+		*
+		* Do _not_ use "tsk" here. We might be inside
+		* an interrupt in the middle of a task switch..
+		*/
+		int offset = __pgd_offset(address);
+		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+		pgd = (pgd_t *) pgd_current + offset;
+		pgd_k = init_mm.pgd + offset;
+
+		if (!pgd_present(*pgd_k))
+			goto no_context;
+		set_pgd(pgd, *pgd_k);
+
+		pud = pud_offset(pgd, address);
+		pud_k = pud_offset(pgd_k, address);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
+		if (!pmd_present(*pmd_k))
+			goto no_context;
+		set_pmd(pmd, *pmd_k);
+
+		pte_k = pte_offset_kernel(pmd_k, address);
+		if (!pte_present(*pte_k))
+			goto no_context;
+		return;
+	}
+}
diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
new file mode 100644
index 00000000000..7780eecc5a4
--- /dev/null
+++ b/arch/score/mm/init.c
@@ -0,0 +1,173 @@
+/*
+ * arch/score/mm/init.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/pagemap.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <asm-generic/sections.h>
+
+#include <asm/tlb.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * We have up to 8 empty zeroed pages so we can map one of the right colour
+ * when needed.
+ */
+unsigned long zero_page_mask;
+unsigned long empty_zero_page;
+EXPORT_SYMBOL_GPL(empty_zero_page);
+
+static struct kcore_list kcore_mem, kcore_vmalloc;
+
+unsigned long setup_zero_pages(void)
+{
+	unsigned int order = 0;
+	unsigned long size;
+	struct page *page;
+
+	empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
+	if (!empty_zero_page)
+		panic("Oh boy, that early out of memory?");
+
+	page = virt_to_page((void *) empty_zero_page);
+	split_page(page, order);
+	while (page < virt_to_page((void *) (empty_zero_page +
+					     (PAGE_SIZE << order)))) {
+		SetPageReserved(page);
+		page++;
+	}
+
+	size = PAGE_SIZE << order;
+	zero_page_mask = (size - 1) & PAGE_MASK;
+
+	return 1UL << order;
+}
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+static int __init page_is_ram(unsigned long pagenr)
+{
+	if (pagenr >= min_low_pfn && pagenr < max_low_pfn)
+		return 1;
+	else
+		return 0;
+}
+
+void __init paging_init(void)
+{
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
+	unsigned long lastpfn;
+
+	pagetable_init();
+	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+	lastpfn = max_low_pfn;
+	free_area_init_nodes(max_zone_pfns);
+}
+
+void __init mem_init(void)
+{
+	unsigned long codesize, reservedpages, datasize, initsize;
+	unsigned long tmp, ram = 0;
+
+	max_mapnr = max_low_pfn;
+	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
+	totalram_pages += free_all_bootmem();
+	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages. */
+	reservedpages = 0;
+
+	for (tmp = 0; tmp < max_low_pfn; tmp++)
+		if (page_is_ram(tmp)) {
+			ram++;
+			if (PageReserved(pfn_to_page(tmp)))
+				reservedpages++;
+		}
+
+	num_physpages = ram;
+	codesize = (unsigned long) &_etext - (unsigned long) &_text;
+	datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+	initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+	kclist_add(&kcore_vmalloc, (void *) VMALLOC_START,
+			VMALLOC_END - VMALLOC_START);
+
+	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
+			"%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
+			(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+			ram << (PAGE_SHIFT-10), codesize >> 10,
+			reservedpages << (PAGE_SHIFT-10), datasize >> 10,
+			initsize >> 10,
+			(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+}
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+
+void free_init_pages(const char *what, unsigned long begin, unsigned long end)
+{
+	unsigned long pfn;
+
+	for (pfn = PFN_UP(begin); pfn < PFN_DOWN(end); pfn++) {
+		struct page *page = pfn_to_page(pfn);
+		void *addr = phys_to_virt(PFN_PHYS(pfn));
+
+		ClearPageReserved(page);
+		init_page_count(page);
+		memset(addr, POISON_FREE_INITMEM, PAGE_SIZE);
+		__free_page(page);
+		totalram_pages++;
+	}
+	printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+	free_init_pages("initrd memory",
+	virt_to_phys((void *) start),
+	virt_to_phys((void *) end));
+}
+#endif
+
+void __init_refok free_initmem(void)
+{
+	free_init_pages("unused kernel memory",
+	    (unsigned long)__init_begin, (unsigned long)__init_end);
+}
+
+unsigned long pgd_current;
+
+#define __page_aligned(order) __attribute__((__aligned__(PAGE_SIZE<<order)))
+
+/*
+ * gcc 3.3 and older have trouble determining that PTRS_PER_PGD and PGD_ORDER
+ * are constants.  So we use the variants from asm-offset.h until that gcc
+ * will officially be retired.
+ */
+pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
diff --git a/arch/score/mm/pgtable.c b/arch/score/mm/pgtable.c
new file mode 100644
index 00000000000..10b0962f83d
--- /dev/null
+++ b/arch/score/mm/pgtable.c
@@ -0,0 +1,60 @@
+/*
+ * arch/score/mm/pgtable-32.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+
+void pgd_init(unsigned long page)
+{
+	unsigned long *p = (unsigned long *) page;
+	int i;
+
+	for (i = 0; i < USER_PTRS_PER_PGD; i += 8) {
+		p[i + 0] = (unsigned long) invalid_pte_table;
+		p[i + 1] = (unsigned long) invalid_pte_table;
+		p[i + 2] = (unsigned long) invalid_pte_table;
+		p[i + 3] = (unsigned long) invalid_pte_table;
+		p[i + 4] = (unsigned long) invalid_pte_table;
+		p[i + 5] = (unsigned long) invalid_pte_table;
+		p[i + 6] = (unsigned long) invalid_pte_table;
+		p[i + 7] = (unsigned long) invalid_pte_table;
+	}
+}
+
+void __init pagetable_init(void)
+{
+	unsigned long vaddr;
+	pgd_t *pgd_base;
+
+	/* Initialize the entire pgd. */
+	pgd_init((unsigned long) swapper_pg_dir);
+	pgd_init((unsigned long) swapper_pg_dir
+		+ sizeof(pgd_t) * USER_PTRS_PER_PGD);
+
+	pgd_base = swapper_pg_dir;
+	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
+}
diff --git a/arch/score/mm/tlb-miss.S b/arch/score/mm/tlb-miss.S
new file mode 100644
index 00000000000..f27651914e8
--- /dev/null
+++ b/arch/score/mm/tlb-miss.S
@@ -0,0 +1,199 @@
+/*
+ * arch/score/mm/tlbex.S
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/pgtable-bits.h>
+#include <asm/scoreregs.h>
+
+/*
+* After this macro runs, the pte faulted on is
+* in register PTE, a ptr into the table in which
+* the pte belongs is in PTR.
+*/
+	.macro	load_pte, pte, ptr
+	la	\ptr, pgd_current
+	lw	\ptr, [\ptr, 0]
+	mfcr	\pte, cr6
+	srli	\pte, \pte, 22
+	slli	\pte, \pte, 2
+	add	\ptr, \ptr, \pte
+	lw	\ptr, [\ptr, 0]
+	mfcr	\pte, cr6
+	srli	\pte, \pte, 10
+	andi	\pte, 0xffc
+	add	\ptr, \ptr, \pte
+	lw	\pte, [\ptr, 0]
+	.endm
+
+	.macro	pte_reload, ptr
+	lw	\ptr, [\ptr, 0]
+	mtcr	\ptr, cr12
+	nop
+	nop
+	nop
+	nop
+	nop
+	.endm
+
+	.macro do_fault, write
+	SAVE_ALL
+	mfcr	r6, cr6
+	mv	r4, r0
+	ldi	r5, \write
+	la	r8, do_page_fault
+	brl	r8
+	j	ret_from_exception
+	.endm
+
+	.macro	pte_writable, pte, ptr, label
+	andi	\pte, 0x280
+	cmpi.c	\pte, 0x280
+	bne	\label
+	lw	\pte, [\ptr, 0]		/*reload PTE*/
+	.endm
+
+/*
+ * Make PTE writable, update software status bits as well,
+ * then store at PTR.
+ */
+	.macro	pte_makewrite, pte, ptr
+	ori	\pte, 0x426
+	sw	\pte, [\ptr, 0]
+	.endm
+
+	.text
+ENTRY(score7_FTLB_refill_Handler)
+	la	r31, pgd_current	/* get pgd pointer */
+	lw	r31, [r31, 0]		/* get the address of PGD */
+	mfcr	r30, cr6
+	srli	r30, r30, 22		/* PGDIR_SHIFT = 22*/
+	slli	r30, r30, 2
+	add	r31, r31, r30
+	lw	r31, [r31, 0]		/* get the address of the start address of PTE table */
+
+	mfcr	r30, cr9
+	andi	r30, 0xfff 		/* equivalent to get PET index and right shift 2 bits */
+	add	r31, r31, r30
+	lw	r30, [r31, 0]		/* load pte entry */
+	mtcr	r30, cr12
+	nop
+	nop
+	nop
+	nop
+	nop
+	mtrtlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte				/* 6 cycles to make sure tlb entry works */
+
+ENTRY(score7_KSEG_refill_Handler)
+	la	r31, pgd_current	/* get pgd pointer */
+	lw	r31, [r31, 0]		/* get the address of PGD */
+	mfcr	r30, cr6
+	srli	r30, r30, 22		/* PGDIR_SHIFT = 22 */
+	slli	r30, r30, 2
+	add	r31, r31, r30
+	lw	r31, [r31, 0]		/* get the address of the start address of PTE table */
+
+	mfcr	r30, cr6		/* get Bad VPN */
+	srli	r30, r30, 10
+	andi	r30, 0xffc		/* PTE VPN mask (bit 11~2) */
+
+	add	r31, r31, r30
+	lw	r30, [r31, 0]		/* load pte entry */
+	mtcr	r30, cr12
+	nop
+	nop
+	nop
+	nop
+	nop
+	mtrtlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte				/* 6 cycles to make sure tlb entry works */
+
+nopage_tlbl:
+	do_fault	0		/* Read */
+
+ENTRY(handle_tlb_refill)
+	load_pte	r30, r31
+	pte_writable	r30, r31, handle_tlb_refill_nopage
+	pte_makewrite	r30, r31	/* Access|Modify|Dirty|Valid */
+	pte_reload	r31
+	mtrtlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte
+handle_tlb_refill_nopage:
+	do_fault	0		/* Read */
+
+ENTRY(handle_tlb_invaild)
+	load_pte	r30, r31
+	stlb				/* find faulting entry */
+	pte_writable	r30, r31, handle_tlb_invaild_nopage
+	pte_makewrite	r30, r31	/* Access|Modify|Dirty|Valid */
+	pte_reload	r31
+	mtptlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte
+handle_tlb_invaild_nopage:
+	do_fault	0		/* Read */
+
+ENTRY(handle_mod)
+	load_pte	r30, r31
+	stlb				/* find faulting entry */
+	andi	r30, _PAGE_WRITE	/* Writable? */
+	cmpz.c	r30
+	beq	nowrite_mod
+	lw	r30, [r31, 0]		/* reload into r30 */
+
+	/* Present and writable bits set, set accessed and dirty bits. */
+	pte_makewrite	r30, r31
+
+	/* Now reload the entry into the tlb. */
+	pte_reload	r31
+	mtptlb
+	nop
+	nop
+	nop
+	nop
+	nop
+	rte
+
+nowrite_mod:
+	do_fault	1	/* Write */
diff --git a/arch/score/mm/tlb-score.c b/arch/score/mm/tlb-score.c
new file mode 100644
index 00000000000..4fa5aa5afec
--- /dev/null
+++ b/arch/score/mm/tlb-score.c
@@ -0,0 +1,251 @@
+/*
+ * arch/score/mm/tlb-score.c
+ *
+ * Score Processor version.
+ *
+ * Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
+ *  Lennox Wu <lennox.wu@sunplusct.com>
+ *  Chen Liqin <liqin.chen@sunplusct.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/tlb.h>
+
+#define TLBSIZE 32
+
+unsigned long asid_cache = ASID_FIRST_VERSION;
+EXPORT_SYMBOL(asid_cache);
+
+void local_flush_tlb_all(void)
+{
+	unsigned long flags;
+	unsigned long old_ASID;
+	int entry;
+
+	local_irq_save(flags);
+	old_ASID = pevn_get() & ASID_MASK;
+	pectx_set(0);			/* invalid */
+	entry = tlblock_get();		/* skip locked entries*/
+
+	for (; entry < TLBSIZE; entry++) {
+		tlbpt_set(entry);
+		pevn_set(KSEG1);
+		barrier();
+		tlb_write_indexed();
+	}
+	pevn_set(old_ASID);
+	local_irq_restore(flags);
+}
+
+/*
+ * If mm is currently active_mm, we can't really drop it. Instead,
+ * we will get a new one for it.
+ */
+static inline void
+drop_mmu_context(struct mm_struct *mm)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	get_new_mmu_context(mm);
+	pevn_set(mm->context & ASID_MASK);
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	if (mm->context != 0)
+		drop_mmu_context(mm);
+}
+
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+	unsigned long end)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	unsigned long vma_mm_context = mm->context;
+	if (mm->context != 0) {
+		unsigned long flags;
+		int size;
+
+		local_irq_save(flags);
+		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+		if (size <= TLBSIZE) {
+			int oldpid = pevn_get() & ASID_MASK;
+			int newpid = vma_mm_context & ASID_MASK;
+
+			start &= PAGE_MASK;
+			end += (PAGE_SIZE - 1);
+			end &= PAGE_MASK;
+			while (start < end) {
+				int idx;
+
+				pevn_set(start | newpid);
+				start += PAGE_SIZE;
+				barrier();
+				tlb_probe();
+				idx = tlbpt_get();
+				pectx_set(0);
+				pevn_set(KSEG1);
+				if (idx < 0)
+					continue;
+				tlb_write_indexed();
+			}
+			pevn_set(oldpid);
+		} else {
+			/* Bigger than TLBSIZE, get new ASID directly */
+			get_new_mmu_context(mm);
+			if (mm == current->active_mm)
+				pevn_set(vma_mm_context & ASID_MASK);
+		}
+		local_irq_restore(flags);
+	}
+}
+
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	unsigned long flags;
+	int size;
+
+	local_irq_save(flags);
+	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	if (size <= TLBSIZE) {
+		int pid = pevn_get();
+
+		start &= PAGE_MASK;
+		end += PAGE_SIZE - 1;
+		end &= PAGE_MASK;
+
+		while (start < end) {
+			long idx;
+
+			pevn_set(start);
+			start += PAGE_SIZE;
+			tlb_probe();
+			idx = tlbpt_get();
+			if (idx < 0)
+				continue;
+			pectx_set(0);
+			pevn_set(KSEG1);
+			barrier();
+			tlb_write_indexed();
+		}
+		pevn_set(pid);
+	} else {
+		local_flush_tlb_all();
+	}
+
+	local_irq_restore(flags);
+}
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	if (!vma || vma->vm_mm->context != 0) {
+		unsigned long flags;
+		int oldpid, newpid, idx;
+		unsigned long vma_ASID = vma->vm_mm->context;
+
+		newpid = vma_ASID & ASID_MASK;
+		page &= PAGE_MASK;
+		local_irq_save(flags);
+		oldpid = pevn_get() & ASID_MASK;
+		pevn_set(page | newpid);
+		barrier();
+		tlb_probe();
+		idx = tlbpt_get();
+		pectx_set(0);
+		pevn_set(KSEG1);
+		if (idx < 0)		/* p_bit(31) - 1: miss, 0: hit*/
+			goto finish;
+		barrier();
+		tlb_write_indexed();
+finish:
+		pevn_set(oldpid);
+		local_irq_restore(flags);
+	}
+}
+
+/*
+ * This one is only used for pages with the global bit set so we don't care
+ * much about the ASID.
+ */
+void local_flush_tlb_one(unsigned long page)
+{
+	unsigned long flags;
+	int oldpid, idx;
+
+	local_irq_save(flags);
+	oldpid = pevn_get();
+	page &= (PAGE_MASK << 1);
+	pevn_set(page);
+	barrier();
+	tlb_probe();
+	idx = tlbpt_get();
+	pectx_set(0);
+	if (idx >= 0) {
+		/* Make sure all entries differ. */
+		pevn_set(KSEG1);
+		barrier();
+		tlb_write_indexed();
+	}
+	pevn_set(oldpid);
+	local_irq_restore(flags);
+}
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	unsigned long flags;
+	int idx, pid;
+
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (current->active_mm != vma->vm_mm)
+		return;
+
+	pid = pevn_get() & ASID_MASK;
+
+	local_irq_save(flags);
+	address &= PAGE_MASK;
+	pevn_set(address | pid);
+	barrier();
+	tlb_probe();
+	idx = tlbpt_get();
+	pectx_set(pte_val(pte));
+	pevn_set(address | pid);
+	if (idx < 0)
+		tlb_write_random();
+	else
+		tlb_write_indexed();
+
+	pevn_set(pid);
+	local_irq_restore(flags);
+}
+
+void __cpuinit tlb_init(void)
+{
+	tlblock_set(0);
+	local_flush_tlb_all();
+	memcpy((void *)(EXCEPTION_VECTOR_BASE_ADDR + 0x100),
+			&score7_FTLB_refill_Handler, 0xFC);
+	flush_icache_range(EXCEPTION_VECTOR_BASE_ADDR + 0x100,
+			EXCEPTION_VECTOR_BASE_ADDR + 0x1FC);
+}
-- 
cgit v1.2.3


From 0402c91af944c61bf788370f03326959a35cb8be Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Fri, 19 Jun 2009 13:53:49 +0800
Subject: score: update files according to review comments

modified:   arch/score/include/asm/cacheflush.h
	modified:   arch/score/include/asm/delay.h
	modified:   arch/score/include/asm/errno.h
	modified:   arch/score/include/asm/pgtable-bits.h
	modified:   arch/score/include/asm/pgtable.h
	modified:   arch/score/include/asm/ptrace.h
	modified:   arch/score/include/asm/unistd.h
	modified:   arch/score/kernel/entry.S
	modified:   arch/score/kernel/process.c
	modified:   arch/score/kernel/ptrace.c
	modified:   arch/score/kernel/signal.c
	modified:   arch/score/kernel/sys_score.c
	modified:   arch/score/kernel/traps.c
	modified:   arch/score/mm/cache.c

Signed-off-by: Chen Liqin <liqin.chen@sunplusct.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/include/asm/cacheflush.h   |  18 ++---
 arch/score/include/asm/delay.h        |  11 ++-
 arch/score/include/asm/errno.h        |   1 -
 arch/score/include/asm/pgtable-bits.h |   2 +
 arch/score/include/asm/pgtable.h      |  59 ++++++++------
 arch/score/include/asm/ptrace.h       |  18 +++--
 arch/score/include/asm/unistd.h       |   3 +-
 arch/score/kernel/entry.S             |   6 +-
 arch/score/kernel/process.c           |   2 +-
 arch/score/kernel/ptrace.c            | 144 +++++++++-------------------------
 arch/score/kernel/signal.c            |   6 +-
 arch/score/kernel/sys_score.c         |   7 +-
 arch/score/kernel/traps.c             |   2 +-
 arch/score/mm/cache.c                 | 125 +++++++++--------------------
 14 files changed, 154 insertions(+), 250 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/cacheflush.h b/arch/score/include/asm/cacheflush.h
index 1c74628caf7..07cc8fc457c 100644
--- a/arch/score/include/asm/cacheflush.h
+++ b/arch/score/include/asm/cacheflush.h
@@ -4,18 +4,16 @@
 /* Keep includes the same across arches. */
 #include <linux/mm.h>
 
-extern void (*flush_cache_all)(void);
-extern void (*flush_cache_mm)(struct mm_struct *mm);
-extern void (*flush_cache_range)(struct vm_area_struct *vma,
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma,
 				unsigned long start, unsigned long end);
-extern void (*flush_cache_page)(struct vm_area_struct *vma,
+extern void flush_cache_page(struct vm_area_struct *vma,
 				unsigned long page, unsigned long pfn);
-extern void (*flush_cache_sigtramp)(unsigned long addr);
-extern void (*flush_icache_all)(void);
-extern void (*flush_icache_range)(unsigned long start, unsigned long end);
-extern void (*flush_data_cache_page)(unsigned long addr);
-
-extern void s7_flush_cache_all(void);
+extern void flush_cache_sigtramp(unsigned long addr);
+extern void flush_icache_all(void);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_dcache_range(unsigned long start, unsigned long end);
 
 #define flush_cache_dup_mm(mm)			do {} while (0)
 #define flush_dcache_page(page)			do {} while (0)
diff --git a/arch/score/include/asm/delay.h b/arch/score/include/asm/delay.h
index ad716f6d922..6726ec199dc 100644
--- a/arch/score/include/asm/delay.h
+++ b/arch/score/include/asm/delay.h
@@ -3,17 +3,22 @@
 
 static inline void __delay(unsigned long loops)
 {
+	/* 3 cycles per loop. */
 	__asm__ __volatile__ (
-		"1:\tsubi\t%0,1\n\t"
+		"1:\tsubi\t%0, 3\n\t"
 		"cmpz.c\t%0\n\t"
-		"bne\t1b\n\t"
+		"ble\t1b\n\t"
 		: "=r" (loops)
 		: "0" (loops));
 }
 
 static inline void __udelay(unsigned long usecs)
 {
-	__delay(usecs);
+	unsigned long loops_per_usec;
+
+	loops_per_usec = (loops_per_jiffy * HZ) / 1000000;
+
+	__delay(usecs * loops_per_usec);
 }
 
 #define udelay(usecs) __udelay(usecs)
diff --git a/arch/score/include/asm/errno.h b/arch/score/include/asm/errno.h
index 7cd3e1f07c0..29ff39d5ab4 100644
--- a/arch/score/include/asm/errno.h
+++ b/arch/score/include/asm/errno.h
@@ -2,6 +2,5 @@
 #define _ASM_SCORE_ERRNO_H
 
 #include <asm-generic/errno.h>
-#define EMAXERRNO 1024
 
 #endif /* _ASM_SCORE_ERRNO_H */
diff --git a/arch/score/include/asm/pgtable-bits.h b/arch/score/include/asm/pgtable-bits.h
index ca16d357a64..7d65a96a82e 100644
--- a/arch/score/include/asm/pgtable-bits.h
+++ b/arch/score/include/asm/pgtable-bits.h
@@ -17,6 +17,8 @@
 #define _CACHE_MASK			(1<<3)
 #define _PAGE_BUFFERABLE		(1<<4)	/*Fallow Spec. */
 
+#define __READABLE	(_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED)
+#define __WRITEABLE	(_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED)
 #define _PAGE_CHG_MASK			\
 	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_CACHE)
 
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
index 0f7177a4220..5e913e57c67 100644
--- a/arch/score/include/asm/pgtable.h
+++ b/arch/score/include/asm/pgtable.h
@@ -106,24 +106,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 	((swp_entry_t) { pte_val(pte)})
 #define __swp_entry_to_pte(x)	((pte_t) {(x).val})
 
-#define __P000 __pgprot(0)
-#define __P001 __pgprot(0)
-#define __P010 __pgprot(0)
-#define __P011 __pgprot(0)
-#define __P100 __pgprot(0)
-#define __P101 __pgprot(0)
-#define __P110 __pgprot(0)
-#define __P111 __pgprot(0)
-
-#define __S000 __pgprot(0)
-#define __S001 __pgprot(0)
-#define __S010 __pgprot(0)
-#define __S011 __pgprot(0)
-#define __S100 __pgprot(0)
-#define __S101 __pgprot(0)
-#define __S110 __pgprot(0)
-#define __S111 __pgprot(0)
-
 #define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
@@ -136,10 +118,15 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
-#define pgd_present(pgd)	(1) /* pages are always present on non MMU */
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_present(pgd)	(1)
 #define pgd_none(pgd)		(0)
 #define pgd_bad(pgd)		(0)
-#define pgd_clear(pgdp)
+#define pgd_clear(pgdp)		do { } while (0)
 
 #define kern_addr_valid(addr)	(1)
 #define	pmd_offset(a, b)	((void *) 0)
@@ -150,11 +137,33 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
 #define pud_offset(pgd, address) ((pud_t *) pgd)
 
-#define PAGE_NONE		__pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_SHARED		__pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_COPY		__pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_READONLY		__pgprot(0) /* these mean nothing to non MMU */
-#define PAGE_KERNEL		__pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_CACHE)
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				_PAGE_CACHE)
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHE)
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_CACHE)
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \
+				_PAGE_GLOBAL | _PAGE_CACHE)
+#define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \
+				__WRITEABLE | _PAGE_GLOBAL & ~_PAGE_CACHE)
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED
 
 #define pgprot_noncached(x)	(x)
 
diff --git a/arch/score/include/asm/ptrace.h b/arch/score/include/asm/ptrace.h
index 1a4900ac49f..66b14c8891c 100644
--- a/arch/score/include/asm/ptrace.h
+++ b/arch/score/include/asm/ptrace.h
@@ -1,6 +1,9 @@
 #ifndef _ASM_SCORE_PTRACE_H
 #define _ASM_SCORE_PTRACE_H
 
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+
 #define PC		32
 #define CONDITION	33
 #define ECR		34
@@ -76,12 +79,17 @@ struct pt_regs {
  */
 #define user_mode(regs) 	((regs->cp0_psr & 8) == 8)
 
-#define instruction_pointer(regs) (0)
-#define profile_pc(regs) instruction_pointer(regs)
+#define instruction_pointer(regs)	((unsigned long)(regs)->cp0_epc)
+#define profile_pc(regs)		instruction_pointer(regs)
 
-extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
+extern void do_syscall_trace(struct pt_regs *regs, int entryexit);
 extern int read_tsk_long(struct task_struct *, unsigned long, unsigned long *);
-extern void clear_single_step(struct task_struct *);
-#endif
+extern int read_tsk_short(struct task_struct *, unsigned long,
+			 unsigned short *);
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+#endif /* __KERNEL__ */
 
 #endif /* _ASM_SCORE_PTRACE_H */
diff --git a/arch/score/include/asm/unistd.h b/arch/score/include/asm/unistd.h
index 9aa3a159bbf..f0f84deeb56 100644
--- a/arch/score/include/asm/unistd.h
+++ b/arch/score/include/asm/unistd.h
@@ -1,7 +1,8 @@
-#ifndef _ASM_SCORE_UNISTD_H
+#if !defined(_ASM_SCORE_UNISTD_H) || defined(__SYSCALL)
 #define _ASM_SCORE_UNISTD_H
 
 #define __ARCH_HAVE_MMU
+#define __ARCH_WANT_IPC_PARSE_VERSION
 
 #include <asm-generic/unistd.h>
 
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
index 6c6b7ea58af..0af89b2f16b 100644
--- a/arch/score/kernel/entry.S
+++ b/arch/score/kernel/entry.S
@@ -23,7 +23,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
 
@@ -434,7 +434,7 @@ stack_done:
 	sw	r8, [r0, PT_R7]
 	b 2f
 1:
-	cmpi.c	r4, -EMAXERRNO-1	# -EMAXERRNO - 1=-1134
+	cmpi.c	r4, -MAX_ERRNO - 1
 	ble	2f
 	ldi	r8, 0x1;
 	sw	r8, [r0, PT_R7]
@@ -466,7 +466,7 @@ syscall_trace_entry:
 	lw	r7, [r0, PT_R7]
 	brl	r8
 
-	li	r8, -EMAXERRNO - 1	# error?
+	li	r8, -MAX_ERRNO - 1
 	sw	r8, [r0, PT_R7]		# set error flag
 
 	neg	r4, r4			# error
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
index aaa3085251f..d93966f7ac8 100644
--- a/arch/score/kernel/process.c
+++ b/arch/score/kernel/process.c
@@ -56,7 +56,7 @@ void __noreturn cpu_idle(void)
 	}
 }
 
-asmlinkage void ret_from_fork(void);
+void ret_from_fork(void);
 
 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
 {
diff --git a/arch/score/kernel/ptrace.c b/arch/score/kernel/ptrace.c
index 8fe7209355a..19911e3187b 100644
--- a/arch/score/kernel/ptrace.c
+++ b/arch/score/kernel/ptrace.c
@@ -80,7 +80,35 @@ write_tsk_long(struct task_struct *child,
 	return copied != sizeof(val) ? -EIO : 0;
 }
 
-void set_single_step(struct task_struct *child)
+/*
+ * Get all user integer registers.
+ */
+static int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
+{
+	struct pt_regs *regs = task_pt_regs(tsk);
+
+	return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
+}
+
+/*
+ * Set all user integer registers.
+ */
+static int ptrace_setregs(struct task_struct *tsk, void __user *uregs)
+{
+	struct pt_regs newregs;
+	int ret;
+
+	ret = -EFAULT;
+	if (copy_from_user(&newregs, uregs, sizeof(struct pt_regs)) == 0) {
+		struct pt_regs *regs = task_pt_regs(tsk);
+		*regs = newregs;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+void user_enable_single_step(struct task_struct *child)
 {
 	/* far_epc is the target of branch */
 	unsigned int epc, far_epc = 0;
@@ -201,7 +229,7 @@ void set_single_step(struct task_struct *child)
 	}
 }
 
-void clear_single_step(struct task_struct *child)
+void user_disable_single_step(struct task_struct *child)
 {
 	if (child->thread.insn1_type == 0)
 		write_tsk_short(child, child->thread.addr1,
@@ -230,54 +258,17 @@ void clear_single_step(struct task_struct *child)
 	child->thread.ss_nextcnt = 0;
 }
 
-
-void ptrace_disable(struct task_struct *child) {}
+void ptrace_disable(struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
 
 long
 arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
 
-	if (request == PTRACE_TRACEME) {
-		/* are we already being traced? */
-		if (current->ptrace & PT_PTRACED)
-			return -EPERM;
-
-		/* set the ptrace bit in the process flags. */
-		current->ptrace |= PT_PTRACED;
-		return 0;
-	}
-
-	ret = -ESRCH;
-	if (!child)
-		return ret;
-
-	ret = -EPERM;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		return ret;
-	}
-
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		return ret;
-
 	switch (request) {
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA: {
-		unsigned long tmp;
-		int copied;
-
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-
-		ret = put_user(tmp, (unsigned long *) data);
-		return ret;
-	}
-
 	/* Read the word at location addr in the USER area.  */
 	case PTRACE_PEEKUSR: {
 		struct pt_regs *regs;
@@ -329,15 +320,6 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		return ret;
 	}
 
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = 0;
-		if (access_process_vm(child, addr, &data, sizeof(data), 1)
-			== sizeof(data))
-			break;
-		ret = -EIO;
-		return ret;
-
 	case PTRACE_POKEUSR: {
 		struct pt_regs *regs;
 		ret = 0;
@@ -372,64 +354,16 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	case PTRACE_SYSCALL: /* continue and stop at next
-				(return from) syscall. */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->state == EXIT_ZOMBIE)	/* already dead. */
-			break;
-		child->exit_code = SIGKILL;
-		clear_single_step(child);
-		wake_up_process(child);
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs(child, (void __user *)data);
 		break;
 
-	case PTRACE_SINGLESTEP: {		/* set the trap flag. */
-		ret = -EIO;
-		if ((unsigned long) data > _NSIG)
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_single_step(child);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		break;
-
-	case PTRACE_SETOPTIONS:
-		if (data & PTRACE_O_TRACESYSGOOD)
-			child->ptrace |= PT_TRACESYSGOOD;
-		else
-			child->ptrace &= ~PT_TRACESYSGOOD;
-		ret = 0;
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs(child, (void __user *)data);
 		break;
 
 	default:
-		ret = -EIO;
+		ret = ptrace_request(child, request, addr, data);
 		break;
 	}
 
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index b4ed1b3f807..5c004084d17 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -132,7 +132,7 @@ void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 	return (void *)((sp - frame_size) & ~7);
 }
 
-asmlinkage int score_sigaltstack(struct pt_regs *regs)
+int score_sigaltstack(struct pt_regs *regs)
 {
 	const stack_t *uss = (const stack_t *) regs->regs[4];
 	stack_t *uoss = (stack_t *) regs->regs[5];
@@ -141,7 +141,7 @@ asmlinkage int score_sigaltstack(struct pt_regs *regs)
 	return do_sigaltstack(uss, uoss, usp);
 }
 
-asmlinkage void score_rt_sigreturn(struct pt_regs *regs)
+void score_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
 	sigset_t set;
@@ -276,7 +276,7 @@ int handle_signal(unsigned long sig, siginfo_t *info,
 	return ret;
 }
 
-asmlinkage void do_signal(struct pt_regs *regs)
+void do_signal(struct pt_regs *regs)
 {
 	struct k_sigaction ka;
 	sigset_t *oldset;
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 6a60d1ee533..68655f4cbce 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -64,8 +64,7 @@ sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
  * Clone a task - this clones the calling program thread.
  * This is called indirectly via a small wrapper
  */
-asmlinkage int
-score_clone(struct pt_regs *regs)
+int score_clone(struct pt_regs *regs)
 {
 	unsigned long clone_flags;
 	unsigned long newsp;
@@ -93,7 +92,7 @@ score_clone(struct pt_regs *regs)
  * sys_execve() executes a new program.
  * This is called indirectly via a small wrapper
  */
-asmlinkage int score_execve(struct pt_regs *regs)
+int score_execve(struct pt_regs *regs)
 {
 	int error;
 	char *filename;
@@ -114,7 +113,7 @@ asmlinkage int score_execve(struct pt_regs *regs)
  * If we ever come here the user sp is bad.  Zap the process right away.
  * Due to the bad stack signaling wouldn't work.
  */
-asmlinkage void bad_stack(void)
+void bad_stack(void)
 {
 	do_exit(SIGSEGV);
 }
diff --git a/arch/score/kernel/traps.c b/arch/score/kernel/traps.c
index 957ae9eb356..0e46fb19a84 100644
--- a/arch/score/kernel/traps.c
+++ b/arch/score/kernel/traps.c
@@ -252,7 +252,7 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	if (current->thread.single_step == 1) {
 		if ((epc == current->thread.addr1) ||
 		    (epc == current->thread.addr2)) {
-			clear_single_step(current);
+			user_disable_single_step(current);
 			force_sig(SIGTRAP, current);
 			return;
 		} else
diff --git a/arch/score/mm/cache.c b/arch/score/mm/cache.c
index 1ebc67f18c6..dbac9d9dfdd 100644
--- a/arch/score/mm/cache.c
+++ b/arch/score/mm/cache.c
@@ -32,34 +32,26 @@
 
 #include <asm/mmu_context.h>
 
-/* Cache operations. */
-void (*flush_cache_all)(void);
-void (*__flush_cache_all)(void);
-void (*flush_cache_mm)(struct mm_struct *mm);
-void (*flush_cache_range)(struct vm_area_struct *vma,
-			unsigned long start, unsigned long end);
-void (*flush_cache_page)(struct vm_area_struct *vma,
-			unsigned long page, unsigned long pfn);
-void (*flush_icache_range)(unsigned long start, unsigned long end);
-void (*__flush_cache_vmap)(void);
-void (*__flush_cache_vunmap)(void);
-void (*flush_cache_sigtramp)(unsigned long addr);
-void (*flush_data_cache_page)(unsigned long addr);
-EXPORT_SYMBOL(flush_data_cache_page);
-void (*flush_icache_all)(void);
-
-/*Score 7 cache operations*/
-static inline void s7___flush_cache_all(void);
-static void s7_flush_cache_mm(struct mm_struct *mm);
-static void s7_flush_cache_range(struct vm_area_struct *vma,
-				unsigned long start, unsigned long end);
-static void s7_flush_cache_page(struct vm_area_struct *vma,
-				unsigned long page, unsigned long pfn);
-static void s7_flush_icache_range(unsigned long start, unsigned long end);
-static void s7_flush_cache_sigtramp(unsigned long addr);
-static void s7_flush_data_cache_page(unsigned long addr);
-static void s7_flush_dcache_range(unsigned long start, unsigned long end);
+/*
+Just flush entire Dcache!!
+You must ensure the page doesn't include instructions, because
+the function will not flush the Icache.
+The addr must be cache aligned.
+*/
+static void flush_data_cache_page(unsigned long addr)
+{
+	unsigned int i;
+	for (i = 0; i < (PAGE_SIZE / L1_CACHE_BYTES); i += L1_CACHE_BYTES) {
+		__asm__ __volatile__(
+		"cache 0x0e, [%0, 0]\n"
+		"cache 0x1a, [%0, 0]\n"
+		"nop\n"
+		: : "r" (addr));
+		addr += L1_CACHE_BYTES;
+	}
+}
 
+/* called by update_mmu_cache. */
 void __update_cache(struct vm_area_struct *vma, unsigned long address,
 		pte_t pte)
 {
@@ -74,7 +66,7 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address,
 	if (page_mapping(page) && test_bit(PG_arch_1, &page->flags)) {
 		addr = (unsigned long) page_address(page);
 		if (exec)
-			s7_flush_data_cache_page(addr);
+			flush_data_cache_page(addr);
 		clear_bit(PG_arch_1, &page->flags);
 	}
 }
@@ -101,44 +93,22 @@ static inline void setup_protection_map(void)
 
 void __devinit cpu_cache_init(void)
 {
-	flush_cache_all = s7_flush_cache_all;
-	__flush_cache_all = s7___flush_cache_all;
-	flush_cache_mm = s7_flush_cache_mm;
-	flush_cache_range = s7_flush_cache_range;
-	flush_cache_page = s7_flush_cache_page;
-	flush_icache_range = s7_flush_icache_range;
-	flush_cache_sigtramp = s7_flush_cache_sigtramp;
-	flush_data_cache_page = s7_flush_data_cache_page;
-
 	setup_protection_map();
 }
 
-void s7_flush_icache_all(void)
+void flush_icache_all(void)
 {
 	__asm__ __volatile__(
-	"la r8, s7_flush_icache_all\n"
+	"la r8, flush_icache_all\n"
 	"cache 0x10, [r8, 0]\n"
 	"nop\nnop\nnop\nnop\nnop\nnop\n"
 	: : : "r8");
 }
 
-void s7_flush_dcache_all(void)
-{
-	__asm__ __volatile__(
-	"la r8, s7_flush_dcache_all\n"
-	"cache 0x1f, [r8, 0]\n"
-	"nop\nnop\nnop\nnop\nnop\nnop\n"
-	"cache 0x1a, [r8, 0]\n"
-	"nop\nnop\nnop\nnop\nnop\nnop\n"
-	: : : "r8");
-}
-
-void s7_flush_cache_all(void)
+void flush_dcache_all(void)
 {
 	__asm__ __volatile__(
-	"la r8, s7_flush_cache_all\n"
-	"cache 0x10, [r8, 0]\n"
-	"nop\nnop\nnop\nnop\nnop\nnop\n"
+	"la r8, flush_dcache_all\n"
 	"cache 0x1f, [r8, 0]\n"
 	"nop\nnop\nnop\nnop\nnop\nnop\n"
 	"cache 0x1a, [r8, 0]\n"
@@ -146,10 +116,10 @@ void s7_flush_cache_all(void)
 	: : : "r8");
 }
 
-void s7___flush_cache_all(void)
+void flush_cache_all(void)
 {
 	__asm__ __volatile__(
-	"la r8, s7_flush_cache_all\n"
+	"la r8, flush_cache_all\n"
 	"cache 0x10, [r8, 0]\n"
 	"nop\nnop\nnop\nnop\nnop\nnop\n"
 	"cache 0x1f, [r8, 0]\n"
@@ -159,11 +129,11 @@ void s7___flush_cache_all(void)
 	: : : "r8");
 }
 
-static void s7_flush_cache_mm(struct mm_struct *mm)
+void flush_cache_mm(struct mm_struct *mm)
 {
 	if (!(mm->context))
 		return;
-	s7_flush_cache_all();
+	flush_cache_all();
 }
 
 /*if we flush a range precisely , the processing may be very long.
@@ -176,8 +146,7 @@ The interface is provided in hopes that the port can find
 a suitably efficient method for removing multiple page
 sized regions from the cache.
 */
-static void
-s7_flush_cache_range(struct vm_area_struct *vma,
+void flush_cache_range(struct vm_area_struct *vma,
 		unsigned long start, unsigned long end)
 {
 	struct mm_struct *mm = vma->vm_mm;
@@ -209,27 +178,26 @@ s7_flush_cache_range(struct vm_area_struct *vma,
 		tmpend = (start | (PAGE_SIZE-1)) > end ?
 				 end : (start | (PAGE_SIZE-1));
 
-		s7_flush_dcache_range(start, tmpend);
+		flush_dcache_range(start, tmpend);
 		if (exec)
-			s7_flush_icache_range(start, tmpend);
+			flush_icache_range(start, tmpend);
 		start = (start + PAGE_SIZE) & ~(PAGE_SIZE - 1);
 	}
 }
 
-static void
-s7_flush_cache_page(struct vm_area_struct *vma,
+void flush_cache_page(struct vm_area_struct *vma,
 		unsigned long addr, unsigned long pfn)
 {
 	int exec = vma->vm_flags & VM_EXEC;
 	unsigned long kaddr = 0xa0000000 | (pfn << PAGE_SHIFT);
 
-	s7_flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
+	flush_dcache_range(kaddr, kaddr + PAGE_SIZE);
 
 	if (exec)
-		s7_flush_icache_range(kaddr, kaddr + PAGE_SIZE);
+		flush_icache_range(kaddr, kaddr + PAGE_SIZE);
 }
 
-static void s7_flush_cache_sigtramp(unsigned long addr)
+void flush_cache_sigtramp(unsigned long addr)
 {
 	__asm__ __volatile__(
 	"cache 0x02, [%0, 0]\n"
@@ -247,31 +215,12 @@ static void s7_flush_cache_sigtramp(unsigned long addr)
 	: : "r" (addr));
 }
 
-/*
-Just flush entire Dcache!!
-You must ensure the page doesn't include instructions, because
-the function will not flush the Icache.
-The addr must be cache aligned.
-*/
-static void s7_flush_data_cache_page(unsigned long addr)
-{
-	unsigned int i;
-	for (i = 0; i < (PAGE_SIZE / L1_CACHE_BYTES); i += L1_CACHE_BYTES) {
-		__asm__ __volatile__(
-		"cache 0x0e, [%0, 0]\n"
-		"cache 0x1a, [%0, 0]\n"
-		"nop\n"
-		: : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
-
 /*
 1. WB and invalid a cache line of Dcache
 2. Drain Write Buffer
 the range must be smaller than PAGE_SIZE
 */
-static void s7_flush_dcache_range(unsigned long start, unsigned long end)
+void flush_dcache_range(unsigned long start, unsigned long end)
 {
 	int size, i;
 
@@ -290,7 +239,7 @@ static void s7_flush_dcache_range(unsigned long start, unsigned long end)
 	}
 }
 
-static void s7_flush_icache_range(unsigned long start, unsigned long end)
+void flush_icache_range(unsigned long start, unsigned long end)
 {
 	int size, i;
 	start = start & ~(L1_CACHE_BYTES - 1);
-- 
cgit v1.2.3


From 72ea3723411c18cace4c8c9e0ccf4116d5e6eaaa Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 19 Jun 2009 11:11:55 +0200
Subject: score: unset __ARCH_WANT_IPC_PARSE_VERSION

This really should not be needed. The change for not changing
the IPC code for every new architecture just went into 2.6.31,
so we can skip it now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/include/asm/unistd.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/unistd.h b/arch/score/include/asm/unistd.h
index f0f84deeb56..0d98b72f462 100644
--- a/arch/score/include/asm/unistd.h
+++ b/arch/score/include/asm/unistd.h
@@ -2,7 +2,6 @@
 #define _ASM_SCORE_UNISTD_H
 
 #define __ARCH_HAVE_MMU
-#define __ARCH_WANT_IPC_PARSE_VERSION
 
 #include <asm-generic/unistd.h>
 
-- 
cgit v1.2.3


From 78229db4c4f78f27ecf772fe7489a70530ba9862 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 19 Jun 2009 11:22:30 +0200
Subject: score: remove __{put,get}_user_unknown

The point of these extern declarations is to provoke a link
error, so an architecture must not provide a symbol for them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/lib/string.S | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/score/lib/string.S b/arch/score/lib/string.S
index 943d0911ea8..00b7d3a2fc6 100644
--- a/arch/score/lib/string.S
+++ b/arch/score/lib/string.S
@@ -182,15 +182,3 @@ ENTRY(__clear_user)
 99:
 	.word	0b, 99b
 	.previous
-
-	.align	2
-ENTRY(__put_user_unknown)
-	.set volatile
-	ldi	r4, -EFAULT
-	br	r3
-
-	.align	2
-ENTRY(__get_user_unknown)
-	ldi	r5, 0
-	ldi	r4, -EFAULT
-	br	r3
-- 
cgit v1.2.3


From f673c032ed13ed8f3fda5922c2190da2892398bc Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 19 Jun 2009 11:31:54 +0200
Subject: score: add generic sys_call_table

This adds back a sys_call_table to the score architecture, which
got lost in the conversion to the generic unistd.h file.
It's rather worrying that the code got submitted without a
system call table, which evidently means that it got zero
testing.

Since the system call table has a different layout from the old
one (which was modeled after the mips-o32 one), I also try to
fix the entry.S path to use it. In the modified calling conventions,
all system call arguments are passed as registers r4 through r9,
instead of r4 through r7 plus stack for the fifth and sixth argument.

This matches what other architectures to when they normally pass
arguments on the stack.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/kernel/Makefile         |  3 ++-
 arch/score/kernel/entry.S          | 47 +++-----------------------------------
 arch/score/kernel/sys_call_table.c | 12 ++++++++++
 arch/score/kernel/sys_score.c      |  9 +-------
 4 files changed, 18 insertions(+), 53 deletions(-)
 create mode 100644 arch/score/kernel/sys_call_table.c

(limited to 'arch')

diff --git a/arch/score/kernel/Makefile b/arch/score/kernel/Makefile
index 1e5de89d5c7..f218673b5d3 100644
--- a/arch/score/kernel/Makefile
+++ b/arch/score/kernel/Makefile
@@ -5,6 +5,7 @@
 extra-y	:= head.o vmlinux.lds
 
 obj-y += entry.o init_task.o irq.o process.o ptrace.o \
-	setup.o signal.o sys_score.o time.o traps.o
+	setup.o signal.o sys_score.o time.o traps.o \
+	sys_call_table.o
 
 obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
index 0af89b2f16b..2f169175bbd 100644
--- a/arch/score/kernel/entry.S
+++ b/arch/score/kernel/entry.S
@@ -400,6 +400,8 @@ ENTRY(handle_sys)
 	sw	r4, [r0, PT_ORIG_R4]	#for restart syscall
 	sw	r7, [r0, PT_ORIG_R7]	#for restart syscall
 	sw	r27, [r0, PT_IS_SYSCALL] # it from syscall
+	sw	r8, [r0, 16]		# argument 5 from user r8
+	sw	r9, [r0, 20]		# argument 6 from user r9
 
 	lw	r9, [r0, PT_EPC]	# skip syscall on return
 	addi	r9, 4
@@ -408,19 +410,14 @@ ENTRY(handle_sys)
 	cmpi.c	r27, __NR_syscalls 	# check syscall number
 	bgtu	illegal_syscall
 
-	slli	r8, r27, 3		# get syscall routine
+	slli	r8, r27, 2		# get syscall routine
 	la	r11, sys_call_table
 	add	r11, r11, r8
 	lw	r10, [r11]		# get syscall entry
-	lw	r11, [r11, 4]		# get number of args
 
 	cmpz.c	r10
 	beq	illegal_syscall
 
-	cmpi.c	r11, 4			# more than 4 arguments?
-	bgtu	stackargs
-
-stack_done:
 	lw	r8, [r28, TI_FLAGS]
 	li	r9, _TIF_SYSCALL_TRACE
 	and.c	r8, r8, r9
@@ -475,44 +472,6 @@ syscall_trace_entry:
 1:	sw	r4, [r0, PT_R2]		# result
 	j	syscall_exit
 
-stackargs:
-	lw	r8, [r0, PT_R0]
-	andri.c	r9, r8, 3		# test whether user sp is align a word
-	bne	bad_stack
-	subi	r11, 5
-	slli	r9, r11, 2
-	add.c	r9, r9, r8
-
-	bmi	bad_stack
-	la	r9, 3f			# calculate branch address
-	slli	r11, r11, 3
-	sub	r9, r9, r11
-	br	r9
-
-2:	lw	r9, [r8, 20]		# argument 6 from usp
-	sw	r9, [r0, 20]
-
-3:	lw	r9, [r8, 16]		# argument 5 from usp
-	sw	r9, [r0, 16]
-	j	stack_done
-
-	.section __ex_table,"a"
-	.word	2b, bad_stack
-	.word	3b, bad_stack
-	.previous
-
-	/*
-	 * The stackpointer for a call with more than 4 arguments is bad.
-	 * We probably should handle this case a bit more drastic.
-	 */
-bad_stack:
-	neg	r27, r27		# error
-	sw	r27, [r0, PT_ORIG_R4]
-	sw	r27, [r0, PT_R4]
-	ldi	r8, 1			# set error flag
-	sw	r8, [r0, PT_R7]
-	j	syscall_return
-
 illegal_syscall:
 	ldi	r4, -ENOSYS		# error
 	sw	r4, [r0, PT_ORIG_R4]
diff --git a/arch/score/kernel/sys_call_table.c b/arch/score/kernel/sys_call_table.c
new file mode 100644
index 00000000000..287369b88c4
--- /dev/null
+++ b/arch/score/kernel/sys_call_table.c
@@ -0,0 +1,12 @@
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+void *sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 68655f4cbce..33188610432 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -75,14 +75,7 @@ int score_clone(struct pt_regs *regs)
 	if (!newsp)
 		newsp = regs->regs[0];
 	parent_tidptr = (int __user *)regs->regs[6];
-
-	child_tidptr = NULL;
-	if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID)) {
-		int __user *__user *usp = (int __user *__user *)regs->regs[0];
-
-		if (get_user(child_tidptr, &usp[4]))
-			return -EFAULT;
-	}
+	child_tidptr = (int __user *)regs->regs[8];
 
 	return do_fork(clone_flags, newsp, regs, 0,
 			parent_tidptr, child_tidptr);
-- 
cgit v1.2.3


From b5022df4c275607f0824526eceb3c217e85279f3 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 19 Jun 2009 11:45:18 +0200
Subject: score: remove init_mm

init_mm is now part of the common code and not provided
by the architecture any more.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/kernel/init_task.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/score/kernel/init_task.c b/arch/score/kernel/init_task.c
index 9eecde00932..54d9552afd6 100644
--- a/arch/score/kernel/init_task.c
+++ b/arch/score/kernel/init_task.c
@@ -26,8 +26,6 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM(init_mm);
-EXPORT_SYMBOL(init_mm);
 
 /*
  * Initial thread structure.
-- 
cgit v1.2.3


From 2f476ef61f0e00fe3fcb96693b6a624a6c52fad9 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 19 Jun 2009 13:40:41 +0200
Subject: score: add prototypes for wrapped syscalls

Every system call should be declared, so this adds missing
declarations for the ones we were missing so far.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/include/asm/syscalls.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/syscalls.h b/arch/score/include/asm/syscalls.h
index 00c28e04fdf..1dd5e0d6b0c 100644
--- a/arch/score/include/asm/syscalls.h
+++ b/arch/score/include/asm/syscalls.h
@@ -1,8 +1,10 @@
 #ifndef _ASM_SCORE_SYSCALLS_H
 #define _ASM_SCORE_SYSCALLS_H
 
-asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-#define sys_clone sys_clone
+asmlinkage long score_clone(struct pt_regs *regs);
+asmlinkage long score_execve(struct pt_regs *regs);
+asmlinkage long score_sigaltstack(struct pt_regs *regs);
+asmlinkage long score_rt_sigreturn(struct pt_regs *regs);
 
 #include <asm-generic/syscalls.h>
 
-- 
cgit v1.2.3


From feaa0457ec8351cae855edc9a3052ac49322538e Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 20 Jun 2009 16:15:40 +0530
Subject: x86: ds.c fix invalid assignment

Fixes the type mixups that cause the following sparse warnings:

  CHECK   arch/x86/kernel/ds.c
arch/x86/kernel/ds.c:549:19: warning: incorrect type in argument 2 (invalid types)
arch/x86/kernel/ds.c:549:19:    expected bad type enum bts_field field
arch/x86/kernel/ds.c:549:19:    got int
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:520:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:520:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:520:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:520:7: error: invalid assignment
arch/x86/kernel/ds.c:520:35: error: incompatible types for operation (*)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
LKML-Reference: <1245494740.8613.12.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/ds.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 48bfe138603..ef42a038f1a 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -509,15 +509,15 @@ enum bts_field {
 	bts_escape		= ((unsigned long)-1 & ~bts_qual_mask)
 };
 
-static inline unsigned long bts_get(const char *base, enum bts_field field)
+static inline unsigned long bts_get(const char *base, unsigned long field)
 {
 	base += (ds_cfg.sizeof_ptr_field * field);
 	return *(unsigned long *)base;
 }
 
-static inline void bts_set(char *base, enum bts_field field, unsigned long val)
+static inline void bts_set(char *base, unsigned long field, unsigned long val)
 {
-	base += (ds_cfg.sizeof_ptr_field * field);;
+	base += (ds_cfg.sizeof_ptr_field * field);
 	(*(unsigned long *)base) = val;
 }
 
-- 
cgit v1.2.3


From e487683990972bf9aa4e688434c46ead76748bca Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Sat, 20 Jun 2009 23:27:16 -0700
Subject: x86, mce: fix typo in comment in asm/mce.h

Fix comment to match the actual declaration.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/mce.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 5cdd8d100ec..b50b9e9042c 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -9,7 +9,7 @@
  */
 
 #define MCG_BANKCNT_MASK	0xff         /* Number of Banks */
-#define MCG_CTL_P		(1ULL<<8)    /* MCG_CAP register available */
+#define MCG_CTL_P		(1ULL<<8)    /* MCG_CTL register available */
 #define MCG_EXT_P		(1ULL<<9)    /* Extended registers available */
 #define MCG_CMCI_P		(1ULL<<10)   /* CMCI supported */
 #define MCG_EXT_CNT_MASK	0xff0000     /* Number of Extended registers */
-- 
cgit v1.2.3


From a95436e44a76a32dcbe7c8df59701ddde53017c1 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Sat, 20 Jun 2009 23:28:22 -0700
Subject: x86, mce: use atomic_inc_return() instead of add by 1

Use atomic_inc_return() instead of atomic_add_return() by 1.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968b..7da8fec9ca8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -242,7 +242,7 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 	/*
 	 * Make sure only one CPU runs in machine check panic
 	 */
-	if (atomic_add_return(1, &mce_paniced) > 1)
+	if (atomic_inc_return(&mce_paniced) > 1)
 		wait_for_panic();
 	barrier();
 
@@ -705,7 +705,7 @@ static int mce_start(int *no_way_out)
 	 * global_nwo should be updated before mce_callin
 	 */
 	smp_wmb();
-	order = atomic_add_return(1, &mce_callin);
+	order = atomic_inc_return(&mce_callin);
 
 	/*
 	 * Wait for everyone.
-- 
cgit v1.2.3


From 99bd0c0fc4b04da54cb311953ef9489931c19c63 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Fri, 19 Jun 2009 10:59:09 +0200
Subject: x86: Set cpu_llc_id on AMD CPUs

This counts when building sched domains in case NUMA information
is not available.

( See cpu_coregroup_mask() which uses llc_shared_map which in turn is
  created based on cpu_llc_id. )

Currently Linux builds domains as follows:
(example from a dual socket quad-core system)

 CPU0 attaching sched-domain:
  domain 0: span 0-7 level CPU
   groups: 0 1 2 3 4 5 6 7

  ...

 CPU7 attaching sched-domain:
  domain 0: span 0-7 level CPU
   groups: 7 0 1 2 3 4 5 6

Ever since that is borked for multi-core AMD CPU systems.
This patch fixes that and now we get a proper:

 CPU0 attaching sched-domain:
  domain 0: span 0-3 level MC
   groups: 0 1 2 3
   domain 1: span 0-7 level CPU
    groups: 0-3 4-7

  ...

 CPU7 attaching sched-domain:
  domain 0: span 4-7 level MC
   groups: 7 4 5 6
   domain 1: span 0-7 level CPU
    groups: 4-7 0-3

This allows scheduler to assign tasks to cores on different sockets
(i.e. that don't share last level cache) for performance reasons.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20090619085909.GJ5218@alberich.amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/amd.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e5b27d8f1b4..28e5f595604 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -258,13 +258,15 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_X86_HT
 	unsigned bits;
+	int cpu = smp_processor_id();
 
 	bits = c->x86_coreid_bits;
-
 	/* Low order bits define the core id (index of core in socket) */
 	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
 	/* Convert the initial APIC ID into the socket ID */
 	c->phys_proc_id = c->initial_apicid >> bits;
+	/* use socket ID also for last level cache */
+	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
 #endif
 }
 
-- 
cgit v1.2.3


From d9f2a5ecb2846d0fd368fb4c45182e43f38e4471 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 20 Jun 2009 13:19:25 +0530
Subject: perf_counter, x8: Fix L1-data-Cache-Store-Referencees for AMD

Fix AMD's Data Cache Refills from System event.

After this patch :

 ./tools/perf/perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses ls /dev/ > /dev/null

 Performance counter stats for 'ls /dev/':

        2499484  L1-data-Cache-Load-Referencees             (scaled from 3.97%)
          70347  L1-data-Cache-Load-Misses                  (scaled from 7.30%)
           9360  L1-data-Cache-Store-Referencees            (scaled from 8.64%)
          32804  L1-data-Cache-Prefetch-Referencees         (scaled from 17.72%)
           7693  L1-data-Cache-Prefetch-Misses              (scaled from 22.97%)
        2180945  L1-instruction-Cache-Load-Referencees      (scaled from 28.48%)
          14518  L1-instruction-Cache-Load-Misses           (scaled from 35.00%)
           2405  L1-instruction-Cache-Prefetch-Referencees  (scaled from 34.89%)
          71387  L2-Cache-Load-Referencees                  (scaled from 34.94%)
          18732  L2-Cache-Load-Misses                       (scaled from 34.92%)
          79918  L2-Cache-Store-Referencees                 (scaled from 36.02%)
        1295294  Data-TLB-Cache-Load-Referencees            (scaled from 35.99%)
          30896  Data-TLB-Cache-Load-Misses                 (scaled from 33.36%)
        1222030  Instruction-TLB-Cache-Load-Referencees     (scaled from 29.46%)
            357  Instruction-TLB-Cache-Load-Misses          (scaled from 20.46%)
         530888  Branch-Cache-Load-Referencees              (scaled from 11.48%)
           8638  Branch-Cache-Load-Misses                   (scaled from 5.09%)

    0.011295149  seconds time elapsed.

Earlier it always shows value 0.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1245484165.3102.6.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef23f78..22eb3a1d4f9 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -401,7 +401,7 @@ static const u64 amd_hw_cache_event_ids
 		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0042, /* Data Cache Refills from L2 */
+		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
 		[ C(RESULT_MISS)   ] = 0,
 	},
 	[ C(OP_PREFETCH) ] = {
-- 
cgit v1.2.3


From c5806df9232d2a7f554b4839b57cac2e664fc256 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 22 Jun 2009 11:56:24 +0900
Subject: x86: fix duplicate free in setup_pcpu_remap() failure path

In the failure path, setup_pcpu_remap() tries to free the area which
has already been freed to make holes in the large page.  Fix it.

[ Impact: fix duplicate free in failure path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9c3f0823e6a..dfbc7e6c64d 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -228,7 +228,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 enomem:
 	for_each_possible_cpu(cpu)
 		if (pcpur_ptrs[cpu])
-			free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
+			free_bootmem(__pa(pcpur_ptrs[cpu]), pcpur_size);
 	ret = -ENOMEM;
 out_free_ar:
 	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
-- 
cgit v1.2.3


From 97c9bf0618cd40b05b4859c1f8a90d8ad97fefb2 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 22 Jun 2009 11:56:24 +0900
Subject: x86: rename remap percpu first chunk allocator to lpage

The "remap" allocator remaps large pages to build the first chunk;
however, the name isn't very good because 4k allocator remaps too and
the whole point of the remap allocator is using large page mapping.
The allocator will be generalized and exported outside of x86, rename
it to lpage before that happens.

percpu_alloc kernel parameter is updated to accept both "remap" and
"lpage" for lpage allocator.

[ Impact: code cleanup, kernel parameter argument updated ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 50 +++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index dfbc7e6c64d..8794c0c94d2 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -124,7 +124,7 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 }
 
 /*
- * Remap allocator
+ * Large page remap allocator
  *
  * This allocator uses PMD page as unit.  A PMD page is allocated for
  * each cpu and each is remapped into vmalloc area using PMD mapping.
@@ -137,20 +137,20 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
  * better than only using 4k mappings while still being NUMA friendly.
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+static size_t pcpul_size __initdata;
+static void **pcpul_ptrs __initdata;
 
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
+static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
 {
 	size_t off = (size_t)pageno << PAGE_SHIFT;
 
-	if (off >= pcpur_size)
+	if (off >= pcpul_size)
 		return NULL;
 
-	return virt_to_page(pcpur_ptrs[cpu] + off);
+	return virt_to_page(pcpul_ptrs[cpu] + off);
 }
 
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size)
 {
 	static struct vm_struct vm;
 	size_t ptrs_size, dyn_size;
@@ -170,36 +170,36 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 	 * Currently supports only single page.  Supporting multiple
 	 * pages won't be too difficult if it ever becomes necessary.
 	 */
-	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+	pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
 			       PERCPU_DYNAMIC_RESERVE);
-	if (pcpur_size > PMD_SIZE) {
+	if (pcpul_size > PMD_SIZE) {
 		pr_warning("PERCPU: static data is larger than large page, "
 			   "can't use large page\n");
 		return -EINVAL;
 	}
-	dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
+	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	/* allocate pointer array and alloc large pages */
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
-	pcpur_ptrs = alloc_bootmem(ptrs_size);
+	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_ptrs[0]));
+	pcpul_ptrs = alloc_bootmem(ptrs_size);
 
 	for_each_possible_cpu(cpu) {
-		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
-		if (!pcpur_ptrs[cpu])
+		pcpul_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
+		if (!pcpul_ptrs[cpu])
 			goto enomem;
 
 		/*
-		 * Only use pcpur_size bytes and give back the rest.
+		 * Only use pcpul_size bytes and give back the rest.
 		 *
 		 * Ingo: The 2MB up-rounding bootmem is needed to make
 		 * sure the partial 2MB page is still fully RAM - it's
 		 * not well-specified to have a PAT-incompatible area
 		 * (unmapped RAM, device memory, etc.) in that hole.
 		 */
-		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
-			     PMD_SIZE - pcpur_size);
+		free_bootmem(__pa(pcpul_ptrs[cpu] + pcpul_size),
+			     PMD_SIZE - pcpul_size);
 
-		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(pcpul_ptrs[cpu], __per_cpu_load, static_size);
 	}
 
 	/* allocate address and map */
@@ -212,7 +212,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 
 		pmd = populate_extra_pmd((unsigned long)vm.addr
 					 + cpu * PMD_SIZE);
-		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
+		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpul_ptrs[cpu])),
 				     PAGE_KERNEL_LARGE));
 	}
 
@@ -220,22 +220,22 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 	pr_info("PERCPU: Remapped at %p with large pages, static data "
 		"%zu bytes\n", vm.addr, static_size);
 
-	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
 				     PMD_SIZE, vm.addr, NULL);
 	goto out_free_ar;
 
 enomem:
 	for_each_possible_cpu(cpu)
-		if (pcpur_ptrs[cpu])
-			free_bootmem(__pa(pcpur_ptrs[cpu]), pcpur_size);
+		if (pcpul_ptrs[cpu])
+			free_bootmem(__pa(pcpul_ptrs[cpu]), pcpul_size);
 	ret = -ENOMEM;
 out_free_ar:
-	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+	free_bootmem(__pa(pcpul_ptrs), ptrs_size);
 	return ret;
 }
 #else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size)
 {
 	return -EINVAL;
 }
@@ -367,7 +367,7 @@ void __init setup_per_cpu_areas(void)
 	 * of large page mappings.  Please read comments on top of
 	 * each allocator for details.
 	 */
-	ret = setup_pcpu_remap(static_size);
+	ret = setup_pcpu_lpage(static_size);
 	if (ret < 0)
 		ret = setup_pcpu_embed(static_size);
 	if (ret < 0)
-- 
cgit v1.2.3


From 0ff2587fd54bd6f66bc6914ada4eb77a7e819a5b Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 22 Jun 2009 11:56:24 +0900
Subject: x86: prepare setup_pcpu_lpage() for pageattr fix

Make the following changes in preparation of coming pageattr updates.

* Define and use array of struct pcpul_ent instead of array of
  pointers.  The only difference is ->cpu field which is set but
  unused yet.

* Rename variables according to the above change.

* Rename local variable vm to pcpul_vm and move it out of the
  function.

[ Impact: no functional difference ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 58 ++++++++++++++++++++++++------------------
 1 file changed, 33 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 8794c0c94d2..7d38941e2b8 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -137,8 +137,14 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
  * better than only using 4k mappings while still being NUMA friendly.
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
+struct pcpul_ent {
+	unsigned int	cpu;
+	void		*ptr;
+};
+
 static size_t pcpul_size __initdata;
-static void **pcpul_ptrs __initdata;
+static struct pcpul_ent *pcpul_map __initdata;
+static struct vm_struct pcpul_vm;
 
 static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
 {
@@ -147,13 +153,12 @@ static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
 	if (off >= pcpul_size)
 		return NULL;
 
-	return virt_to_page(pcpul_ptrs[cpu] + off);
+	return virt_to_page(pcpul_map[cpu].ptr + off);
 }
 
 static ssize_t __init setup_pcpu_lpage(size_t static_size)
 {
-	static struct vm_struct vm;
-	size_t ptrs_size, dyn_size;
+	size_t map_size, dyn_size;
 	unsigned int cpu;
 	ssize_t ret;
 
@@ -180,12 +185,14 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size)
 	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	/* allocate pointer array and alloc large pages */
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_ptrs[0]));
-	pcpul_ptrs = alloc_bootmem(ptrs_size);
+	map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+	pcpul_map = alloc_bootmem(map_size);
 
 	for_each_possible_cpu(cpu) {
-		pcpul_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
-		if (!pcpul_ptrs[cpu])
+		pcpul_map[cpu].cpu = cpu;
+		pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+							PMD_SIZE);
+		if (!pcpul_map[cpu].ptr)
 			goto enomem;
 
 		/*
@@ -196,42 +203,43 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size)
 		 * not well-specified to have a PAT-incompatible area
 		 * (unmapped RAM, device memory, etc.) in that hole.
 		 */
-		free_bootmem(__pa(pcpul_ptrs[cpu] + pcpul_size),
+		free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
 			     PMD_SIZE - pcpul_size);
 
-		memcpy(pcpul_ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
 	}
 
 	/* allocate address and map */
-	vm.flags = VM_ALLOC;
-	vm.size = num_possible_cpus() * PMD_SIZE;
-	vm_area_register_early(&vm, PMD_SIZE);
+	pcpul_vm.flags = VM_ALLOC;
+	pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+	vm_area_register_early(&pcpul_vm, PMD_SIZE);
 
 	for_each_possible_cpu(cpu) {
-		pmd_t *pmd;
+		pmd_t *pmd, pmd_v;
 
-		pmd = populate_extra_pmd((unsigned long)vm.addr
-					 + cpu * PMD_SIZE);
-		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpul_ptrs[cpu])),
-				     PAGE_KERNEL_LARGE));
+		pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
+					 cpu * PMD_SIZE);
+		pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
+				PAGE_KERNEL_LARGE);
+		set_pmd(pmd, pmd_v);
 	}
 
 	/* we're ready, commit */
 	pr_info("PERCPU: Remapped at %p with large pages, static data "
-		"%zu bytes\n", vm.addr, static_size);
+		"%zu bytes\n", pcpul_vm.addr, static_size);
 
 	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     PMD_SIZE, vm.addr, NULL);
-	goto out_free_ar;
+				     PMD_SIZE, pcpul_vm.addr, NULL);
+	goto out_free_map;
 
 enomem:
 	for_each_possible_cpu(cpu)
-		if (pcpul_ptrs[cpu])
-			free_bootmem(__pa(pcpul_ptrs[cpu]), pcpul_size);
+		if (pcpul_map[cpu].ptr)
+			free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
 	ret = -ENOMEM;
-out_free_ar:
-	free_bootmem(__pa(pcpul_ptrs), ptrs_size);
+out_free_map:
+	free_bootmem(__pa(pcpul_map), map_size);
 	return ret;
 }
 #else
-- 
cgit v1.2.3


From 992f4c1c2c1583cef3296ec4bf5205843a9a5f3d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 22 Jun 2009 11:56:24 +0900
Subject: x86: reorganize cpa_process_alias()

Reorganize cpa_process_alias() so that new alias condition can be
added easily.

Jan Beulich spotted problem in the original cleanup thread which
incorrectly assumed the two existing conditions were mutially
exclusive.

[ Impact: code reorganization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 50 +++++++++++++++++++++++---------------------------
 1 file changed, 23 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 3cfe9ced8a4..2ab058b0947 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -681,8 +681,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias);
 static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
-	int ret = 0;
-	unsigned long temp_cpa_vaddr, vaddr;
+	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+	unsigned long vaddr;
+	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
 		return 0;
@@ -706,42 +707,37 @@ static int cpa_process_alias(struct cpa_data *cpa)
 		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
 
 		alias_cpa = *cpa;
-		temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
-		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.vaddr = &laddr;
 		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-
 		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
 	}
 
 #ifdef CONFIG_X86_64
-	if (ret)
-		return ret;
 	/*
-	 * No need to redo, when the primary call touched the high
-	 * mapping already:
-	 */
-	if (within(vaddr, (unsigned long) _text, _brk_end))
-		return 0;
-
-	/*
-	 * If the physical address is inside the kernel map, we need
+	 * If the primary call didn't touch the high mapping already
+	 * and the physical address is inside the kernel map, we need
 	 * to touch the high mapped kernel as well:
 	 */
-	if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
-		return 0;
-
-	alias_cpa = *cpa;
-	temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
-	alias_cpa.vaddr = &temp_cpa_vaddr;
-	alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+	if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+	    within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+		unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+					       __START_KERNEL_map - phys_base;
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-	/*
-	 * The high mapping range is imprecise, so ignore the return value.
-	 */
-	__change_page_attr_set_clr(&alias_cpa, 0);
+		/*
+		 * The high mapping range is imprecise, so ignore the
+		 * return value.
+		 */
+		__change_page_attr_set_clr(&alias_cpa, 0);
+	}
 #endif
-	return ret;
+
+	return 0;
 }
 
 static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
-- 
cgit v1.2.3


From e59a1bb2fdfb745c685f5b40ffbed126331d3223 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 22 Jun 2009 11:56:24 +0900
Subject: x86: fix pageattr handling for lpage percpu allocator and re-enable
 it

lpage allocator aliases a PMD page for each cpu and returns whatever
is unused to the page allocator.  When the pageattr of the recycled
pages are changed, this makes the two aliases point to the overlapping
regions with different attributes which isn't allowed and known to
cause subtle data corruption in certain cases.

This can be handled in simliar manner to the x86_64 highmap alias.
pageattr code should detect if the target pages have PMD alias and
split the PMD alias and synchronize the attributes.

pcpur allocator is updated to keep the allocated PMD pages map sorted
in ascending address order and provide pcpu_lpage_remapped() function
which binary searches the array to determine whether the given address
is aliased and if so to which address.  pageattr is updated to use
pcpu_lpage_remapped() to detect the PMD alias and split it up as
necessary from cpa_process_alias().

Jan Beulich spotted the original problem and incorrect usage of vaddr
instead of laddr for lookup.

With this, lpage percpu allocator should work correctly.  Re-enable
it.

[ Impact: fix subtle lpage pageattr bug and re-enable lpage ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h  | 10 ++++++
 arch/x86/kernel/setup_percpu.c | 72 ++++++++++++++++++++++++++++++++++++------
 arch/x86/mm/pageattr.c         | 21 +++++++++++-
 3 files changed, 93 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 02ecb30982a..103f1ddb0d8 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -42,6 +42,7 @@
 
 #else /* ...!ASSEMBLY */
 
+#include <linux/kernel.h>
 #include <linux/stringify.h>
 
 #ifdef CONFIG_SMP
@@ -155,6 +156,15 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_lpage_remapped(void *kaddr);
+#else
+static inline void *pcpu_lpage_remapped(void *kaddr)
+{
+	return NULL;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 7d38941e2b8..bad2fd22311 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -142,8 +142,8 @@ struct pcpul_ent {
 	void		*ptr;
 };
 
-static size_t pcpul_size __initdata;
-static struct pcpul_ent *pcpul_map __initdata;
+static size_t pcpul_size;
+static struct pcpul_ent *pcpul_map;
 static struct vm_struct pcpul_vm;
 
 static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
@@ -160,15 +160,14 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size)
 {
 	size_t map_size, dyn_size;
 	unsigned int cpu;
+	int i, j;
 	ssize_t ret;
 
 	/*
 	 * If large page isn't supported, there's no benefit in doing
 	 * this.  Also, on non-NUMA, embedding is better.
-	 *
-	 * NOTE: disabled for now.
 	 */
-	if (true || !cpu_has_pse || !pcpu_need_numa())
+	if (!cpu_has_pse || !pcpu_need_numa())
 		return -EINVAL;
 
 	/*
@@ -231,16 +230,71 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size)
 	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
 				     PMD_SIZE, pcpul_vm.addr, NULL);
-	goto out_free_map;
+
+	/* sort pcpul_map array for pcpu_lpage_remapped() */
+	for (i = 0; i < num_possible_cpus() - 1; i++)
+		for (j = i + 1; j < num_possible_cpus(); j++)
+			if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
+				struct pcpul_ent tmp = pcpul_map[i];
+				pcpul_map[i] = pcpul_map[j];
+				pcpul_map[j] = tmp;
+			}
+
+	return ret;
 
 enomem:
 	for_each_possible_cpu(cpu)
 		if (pcpul_map[cpu].ptr)
 			free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
-	ret = -ENOMEM;
-out_free_map:
 	free_bootmem(__pa(pcpul_map), map_size);
-	return ret;
+	return -ENOMEM;
+}
+
+/**
+ * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpul recycled area.  This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_lpage_remapped(void *kaddr)
+{
+	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+	int left = 0, right = num_possible_cpus() - 1;
+	int pos;
+
+	/* pcpul in use at all? */
+	if (!pcpul_map)
+		return NULL;
+
+	/* okay, perform binary search */
+	while (left <= right) {
+		pos = (left + right) / 2;
+
+		if (pcpul_map[pos].ptr < pmd_addr)
+			left = pos + 1;
+		else if (pcpul_map[pos].ptr > pmd_addr)
+			right = pos - 1;
+		else {
+			/* it shouldn't be in the area for the first chunk */
+			WARN_ON(offset < pcpul_size);
+
+			return pcpul_vm.addr +
+				pcpul_map[pos].cpu * PMD_SIZE + offset;
+		}
+	}
+
+	return NULL;
 }
 #else
 static ssize_t __init setup_pcpu_lpage(size_t static_size)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 2ab058b0947..1b734d7a896 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
+#include <linux/pfn.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -682,7 +683,7 @@ static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
 	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
-	unsigned long vaddr;
+	unsigned long vaddr, remapped;
 	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
@@ -737,6 +738,24 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	}
 #endif
 
+	/*
+	 * If the PMD page was partially used for per-cpu remapping,
+	 * the recycled area needs to be split and modified.  Because
+	 * the area is always proper subset of a PMD page
+	 * cpa->numpages is guaranteed to be 1 for these areas, so
+	 * there's no need to loop over and check for further remaps.
+	 */
+	remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
+	if (remapped) {
+		WARN_ON(cpa->numpages > 1);
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &remapped;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From fa8a7094ba1679b4b9b443e0ac9f5e046c79ee8d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 22 Jun 2009 11:56:24 +0900
Subject: x86: implement percpu_alloc kernel parameter

According to Andi, it isn't clear whether lpage allocator is worth the
trouble as there are many processors where PMD TLB is far scarcer than
PTE TLB.  The advantage or disadvantage probably depends on the actual
size of percpu area and specific processor.  As performance
degradation due to TLB pressure tends to be highly workload specific
and subtle, it is difficult to decide which way to go without more
data.

This patch implements percpu_alloc kernel parameter to allow selecting
which first chunk allocator to use to ease debugging and testing.

While at it, make sure all the failure paths report why something
failed to help determining why certain allocator isn't working.  Also,
kill the "Great future plan" comment which had already been realized
quite some time ago.

[ Impact: allow explicit percpu first chunk allocator selection ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 69 ++++++++++++++++++++++++++++++------------
 1 file changed, 50 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index bad2fd22311..165ebd5ba83 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -156,20 +156,23 @@ static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
 	return virt_to_page(pcpul_map[cpu].ptr + off);
 }
 
-static ssize_t __init setup_pcpu_lpage(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
 	size_t map_size, dyn_size;
 	unsigned int cpu;
 	int i, j;
 	ssize_t ret;
 
-	/*
-	 * If large page isn't supported, there's no benefit in doing
-	 * this.  Also, on non-NUMA, embedding is better.
-	 */
-	if (!cpu_has_pse || !pcpu_need_numa())
+	/* on non-NUMA, embedding is better */
+	if (!chosen && !pcpu_need_numa())
 		return -EINVAL;
 
+	/* need PSE */
+	if (!cpu_has_pse) {
+		pr_warning("PERCPU: lpage allocator requires PSE\n");
+		return -EINVAL;
+	}
+
 	/*
 	 * Currently supports only single page.  Supporting multiple
 	 * pages won't be too difficult if it ever becomes necessary.
@@ -191,8 +194,11 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size)
 		pcpul_map[cpu].cpu = cpu;
 		pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
 							PMD_SIZE);
-		if (!pcpul_map[cpu].ptr)
+		if (!pcpul_map[cpu].ptr) {
+			pr_warning("PERCPU: failed to allocate large page "
+				   "for cpu%u\n", cpu);
 			goto enomem;
+		}
 
 		/*
 		 * Only use pcpul_size bytes and give back the rest.
@@ -297,7 +303,7 @@ void *pcpu_lpage_remapped(void *kaddr)
 	return NULL;
 }
 #else
-static ssize_t __init setup_pcpu_lpage(size_t static_size)
+static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
 	return -EINVAL;
 }
@@ -311,7 +317,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size)
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -320,7 +326,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 	 * this.  Also, embedding allocation doesn't play well with
 	 * NUMA.
 	 */
-	if (!cpu_has_pse || pcpu_need_numa())
+	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -370,8 +376,11 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 			void *ptr;
 
 			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
-			if (!ptr)
+			if (!ptr) {
+				pr_warning("PERCPU: failed to allocate "
+					   "4k page for cpu%u\n", cpu);
 				goto enomem;
+			}
 
 			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
 			pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -395,6 +404,16 @@ out_free_ar:
 	return ret;
 }
 
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+	return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -408,11 +427,6 @@ static inline void setup_percpu_segment(int cpu)
 #endif
 }
 
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
 void __init setup_per_cpu_areas(void)
 {
 	size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -429,9 +443,26 @@ void __init setup_per_cpu_areas(void)
 	 * of large page mappings.  Please read comments on top of
 	 * each allocator for details.
 	 */
-	ret = setup_pcpu_lpage(static_size);
-	if (ret < 0)
-		ret = setup_pcpu_embed(static_size);
+	ret = -EINVAL;
+	if (strlen(pcpu_chosen_alloc)) {
+		if (strcmp(pcpu_chosen_alloc, "4k")) {
+			if (!strcmp(pcpu_chosen_alloc, "lpage"))
+				ret = setup_pcpu_lpage(static_size, true);
+			else if (!strcmp(pcpu_chosen_alloc, "embed"))
+				ret = setup_pcpu_embed(static_size, true);
+			else
+				pr_warning("PERCPU: unknown allocator %s "
+					   "specified\n", pcpu_chosen_alloc);
+			if (ret < 0)
+				pr_warning("PERCPU: %s allocator failed (%zd), "
+					   "falling back to 4k\n",
+					   pcpu_chosen_alloc, ret);
+		}
+	} else {
+		ret = setup_pcpu_lpage(static_size, false);
+		if (ret < 0)
+			ret = setup_pcpu_embed(static_size, false);
+	}
 	if (ret < 0)
 		ret = setup_pcpu_4k(static_size);
 	if (ret < 0)
-- 
cgit v1.2.3


From 0017c869ddcb73069905d09f9e98e68627466237 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 22 Jun 2009 11:56:24 +0900
Subject: x86: ensure percpu lpage doesn't consume too much vmalloc space

On extreme configuration (e.g. 32bit 32-way NUMA machine), lpage
percpu first chunk allocator can consume too much of vmalloc space.
Make it fall back to 4k allocator if the consumption goes over 20%.

[ Impact: add sanity check for lpage percpu first chunk allocator ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 165ebd5ba83..29a3eef7cf4 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -163,9 +163,21 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 	int i, j;
 	ssize_t ret;
 
-	/* on non-NUMA, embedding is better */
-	if (!chosen && !pcpu_need_numa())
-		return -EINVAL;
+	if (!chosen) {
+		size_t vm_size = VMALLOC_END - VMALLOC_START;
+		size_t tot_size = num_possible_cpus() * PMD_SIZE;
+
+		/* on non-NUMA, embedding is better */
+		if (!pcpu_need_numa())
+			return -EINVAL;
+
+		/* don't consume more than 20% of vmalloc area */
+		if (tot_size > vm_size / 5) {
+			pr_info("PERCPU: too large chunk size %zuMB for "
+				"large page remap\n", tot_size >> 20);
+			return -EINVAL;
+		}
+	}
 
 	/* need PSE */
 	if (!cpu_has_pse) {
-- 
cgit v1.2.3


From e831a9c6186ca1f63fdf2f41628193dd690ab440 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Mon, 22 Jun 2009 17:10:57 +0800
Subject: score: move save arg5 and arg6 instruction in front of enable_irq

Because enable_irq clobber r8 before arg5 was saved.

	modified:   arch/score/kernel/entry.S

Signed-off-by: Chen Liqin <liqin.chen@sunplusct.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/kernel/entry.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
index 2f169175bbd..10e859ddefd 100644
--- a/arch/score/kernel/entry.S
+++ b/arch/score/kernel/entry.S
@@ -395,13 +395,13 @@ ENTRY(resume)
 
 ENTRY(handle_sys)
 	SAVE_ALL
+	sw	r8, [r0, 16]		# argument 5 from user r8
+	sw	r9, [r0, 20]		# argument 6 from user r9
 	enable_irq
 
 	sw	r4, [r0, PT_ORIG_R4]	#for restart syscall
 	sw	r7, [r0, PT_ORIG_R7]	#for restart syscall
 	sw	r27, [r0, PT_IS_SYSCALL] # it from syscall
-	sw	r8, [r0, 16]		# argument 5 from user r8
-	sw	r9, [r0, 20]		# argument 6 from user r9
 
 	lw	r9, [r0, PT_EPC]	# skip syscall on return
 	addi	r9, 4
-- 
cgit v1.2.3


From 854c879f5abf309ebd378bea1ee41acf4ddf7194 Mon Sep 17 00:00:00 2001
From: Pekka J Enberg <penberg@cs.helsinki.fi>
Date: Mon, 22 Jun 2009 17:39:41 +0300
Subject: x86: Move init_gbpages() to setup_arch()

The init_gbpages() function is conditionally called from
init_memory_mapping() function. There are two call-sites where
this 'after_bootmem' condition can be true: setup_arch() and
mem_init() via pci_iommu_alloc().

Therefore, it's safe to move the call to init_gbpages() to
setup_arch() as it's always called before mem_init().

This removes an after_bootmem use - paving the way to remove
all uses of that state variable.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <Pine.LNX.4.64.0906221731210.19474@melkki.cs.Helsinki.FI>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 16 ++++++++++++++++
 arch/x86/mm/init.c      | 17 -----------------
 2 files changed, 16 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index be5ae80f897..de2cab13284 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -289,6 +289,20 @@ void * __init extend_brk(size_t size, size_t align)
 	return ret;
 }
 
+#ifdef CONFIG_X86_64
+static void __init init_gbpages(void)
+{
+	if (direct_gbpages && cpu_has_gbpages)
+		printk(KERN_INFO "Using GB pages for direct mapping\n");
+	else
+		direct_gbpages = 0;
+}
+#else
+static inline void init_gbpages(void)
+{
+}
+#endif
+
 static void __init reserve_brk(void)
 {
 	if (_brk_end > _brk_start)
@@ -871,6 +885,8 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_brk();
 
+	init_gbpages();
+
 	/* max_pfn_mapped is updated here */
 	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index f53b57e4086..47ce9a2ce5e 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -177,20 +177,6 @@ static int __meminit save_mr(struct map_range *mr, int nr_range,
 	return nr_range;
 }
 
-#ifdef CONFIG_X86_64
-static void __init init_gbpages(void)
-{
-	if (direct_gbpages && cpu_has_gbpages)
-		printk(KERN_INFO "Using GB pages for direct mapping\n");
-	else
-		direct_gbpages = 0;
-}
-#else
-static inline void init_gbpages(void)
-{
-}
-#endif
-
 /*
  * Setup the direct mapping of the physical memory at PAGE_OFFSET.
  * This runs before bootmem is initialized and gets pages directly from
@@ -210,9 +196,6 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 
 	printk(KERN_INFO "init_memory_mapping: %016lx-%016lx\n", start, end);
 
-	if (!after_bootmem)
-		init_gbpages();
-
 #if defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KMEMCHECK)
 	/*
 	 * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
-- 
cgit v1.2.3


From 0c405b3346ea08098a82a1ee82912b018dfa9f96 Mon Sep 17 00:00:00 2001
From: Jonathan McDowell <noodles@earth.li>
Date: Tue, 23 Jun 2009 13:30:21 +0300
Subject: OMAP1: Fix compilation of arch/arm/mach-omap1/mailbox.c

This fixes the positioning of " in MODULE_AUTHOR, which is currently
causing a build failure on latest git with CONFIG_OMAP_MBOX_FWK=m; the
original breakage appears to date from the end of last year in
a5abbbe52b7e89a7633319c5417bd4331f7ac8ed

Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/mailbox.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 0af4d6c85b4..6810b4aeb02 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
 MODULE_ALIAS("platform:omap1-mailbox");
-- 
cgit v1.2.3


From e4d24ec39c98cdc9cd97c26fdd426bbab0034fbe Mon Sep 17 00:00:00 2001
From: Andrew de Quincey <adq_dvb@lidskialf.net>
Date: Tue, 23 Jun 2009 13:30:21 +0300
Subject: OMAP1: Fix N770 MMC support

Some of the N770's MMC configuration options seem to have been
dropped. This patch adds them back in again.

Note that only the .ocr_mask change was /critical/, but I've added the
.max_freq setting back as well, as the original sources had it. Can
anyone confirm if this is unnecessary?

Secondly, there is support in the original code for a 4wire/higher
speed mode. As I don't have the requisite N770 hardware (I think it
was a rev2 N770?) to test this, I can't really add it back.

Signed-off-by: Andrew de Quincey <adq@lidskialf.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-nokia770.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index e70fc7c66bb..d9ebba01ffc 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -205,9 +205,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.dma_mask			= 0xffffffff,
+	.max_freq                       = 12000000,
 	.slots[0]       = {
 		.set_power		= nokia770_mmc_set_power,
 		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
-- 
cgit v1.2.3


From d376f89701b0aa5b45d25fbfbeb1a0040399ad30 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Tue, 23 Jun 2009 13:30:22 +0300
Subject: OMAP1: remove duplicated #include

Remove duplicated #include in arch/arm/mach-omap1/board-nokia770.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-nokia770.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d9ebba01ffc..ed2a48a9ce7 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -36,7 +36,6 @@
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
-- 
cgit v1.2.3


From 762ad3a476baa1831f732488e80960f4aa024393 Mon Sep 17 00:00:00 2001
From: Grazvydas Ignotas <notasas@gmail.com>
Date: Tue, 23 Jun 2009 13:30:22 +0300
Subject: OMAP2/3: mmc-twl4030: use correct controller in twl_mmc23_set_power

twl_mmc23_set_power() has MMC2 twl_mmc_controller hardcoded in it, which
breaks MMC3. Find the right controller to use instead.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mmc-twl4030.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 9756a878fd9..1541fd4c8d0 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -263,8 +263,19 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
 {
 	int ret = 0;
-	struct twl_mmc_controller *c = &hsmmc[1];
+	struct twl_mmc_controller *c = NULL;
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+		if (mmc == hsmmc[i].mmc) {
+			c = &hsmmc[i];
+			break;
+		}
+	}
+
+	if (c == NULL)
+		return -ENODEV;
 
 	/* If we don't see a Vcc regulator, assume it's a fixed
 	 * voltage always-on regulator.
-- 
cgit v1.2.3


From 091a58af0ba1765d80b1e74382c7572baceb1bdc Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 23 Jun 2009 13:30:22 +0300
Subject: OMAP2/3: omap mailbox: platform_get_irq() error ignored

platform_get_irq may return -ENXIO. but struct omap_mbox mbox_dsp_info.irq
is unsigned, so the error was not noticed.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mailbox.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index fd5b8a5925c..6f71f3730c9 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
-	if (mbox_dsp_info.irq < 0) {
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
 		goto err_dsp;
 	}
+	mbox_dsp_info.irq = ret;
 
 	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)
-- 
cgit v1.2.3


From 8e25ad964aac0bf6b30dd013303750089f819679 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 23 Jun 2009 13:30:23 +0300
Subject: OMAP2/3: Add omap_type() for determining GP/EMU/HS

The omap_type() function is added and returns the DEVICETYPE field of
the CONTROL_STATUS register.  The result can be used for conditional
code based on whether device is GP (general purpose), EMU or
HS (high security). Also move the type defines so omap1 code
compile does not require ifdefs for sections using these defines.

This code is needed for the following fix to set the SRAM
size correctly for HS omaps.  Also at least PM and watchdog
code will need this function.

Signed-off-by: Kevin Hilman <khilman@ti.deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/id.c              | 22 ++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/cpu.h | 22 +++++++++++-----------
 2 files changed, 33 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 458990e20c6..a98201cc265 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
 }
 EXPORT_SYMBOL(omap_chip_is);
 
+int omap_type(void)
+{
+	u32 val = 0;
+
+	if (cpu_is_omap24xx())
+		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	else if (cpu_is_omap34xx())
+		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	else {
+		pr_err("Cannot detect omap type!\n");
+		goto out;
+	}
+
+	val &= OMAP2_DEVICETYPE_MASK;
+	val >>= 8;
+
+out:
+	return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP_TAP_IDCODE		0x0204
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index fc60c4ebcc2..285eaa3a827 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -30,6 +30,17 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
+
+int omap_type(void);
+
 struct omap_chip_id {
 	u8 oc;
 	u8 type;
@@ -424,17 +435,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 
 int omap_chip_is(struct omap_chip_id oci);
-int omap_type(void);
-
-/*
- * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
 void omap2_check_revision(void);
 
 #endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-- 
cgit v1.2.3


From 5b0acc59d1bc5c310dfd6976555664f9dcf4dacd Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Tue, 23 Jun 2009 13:30:23 +0300
Subject: OMAP3: SRAM size fix for HS/EMU devices

SRAM size fix for HS/EMU devices

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/sram.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 65006df3f1b..4ea73804d21 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -133,7 +133,12 @@ void __init omap_detect_sram(void)
 			if (cpu_is_omap34xx()) {
 				omap_sram_base = OMAP3_SRAM_PUB_VA;
 				omap_sram_start = OMAP3_SRAM_PUB_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+					omap_sram_size = 0x7000; /* 28K */
+				} else {
+					omap_sram_size = 0x8000; /* 32K */
+				}
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
-- 
cgit v1.2.3


From aecedb94b366d6fb5e2a17ca18a5dc78e593198e Mon Sep 17 00:00:00 2001
From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Date: Tue, 23 Jun 2009 13:30:24 +0300
Subject: OMAP3: DMA: Enable idlemodes for DMA OCP

This patch enables MStandby smart-idle mode, autoidle smartidle mode,
and the autoidle bit for DMA4_OCP_SYSCONFIG.

Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@ti.deeprootsystems.com>
---
 arch/arm/plat-omap/dma.c              | 13 +++++++++++++
 arch/arm/plat-omap/include/mach/dma.h | 15 +++++++++++++++
 2 files changed, 28 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b..7677a4a1cef 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2457,6 +2457,19 @@ static int __init omap_init_dma(void)
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
+	/* Enable smartidle idlemodes and autoidle */
+	if (cpu_is_omap34xx()) {
+		u32 v = dma_read(OCP_SYSCONFIG);
+		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+				DMA_SYSCONFIG_SIDLEMODE_MASK |
+				DMA_SYSCONFIG_AUTOIDLE);
+		v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+			DMA_SYSCONFIG_AUTOIDLE);
+		dma_write(v , OCP_SYSCONFIG);
+	}
+
+
 	/* FIXME: Update LCD DMA to work on 24xx */
 	if (cpu_class_is_omap1()) {
 		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 8c1eae88737..7b939cc0196 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -389,6 +389,21 @@
 #define DMA_THREAD_FIFO_25		(0x02 << 14)
 #define DMA_THREAD_FIFO_50		(0x03 << 14)
 
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
+#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE			0x2
+#define DMA_IDLEMODE_NO_IDLE			0x1
+#define DMA_IDLEMODE_FORCE_IDLE			0x0
+
 /* Chaining modes*/
 #ifndef CONFIG_ARCH_OMAP1
 #define OMAP_DMA_STATIC_CHAIN		0x1
-- 
cgit v1.2.3


From 6d453e84b587f38e4197bb2c6a37296c4a80cbac Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 23 Jun 2009 13:30:24 +0300
Subject: OMAP2/3: gpmc-onenand: correct use of async timings

Use async timings when sync timings are not requested.

Also ensure that OneNAND is in async mode when async
timings are used.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc-onenand.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 2fd22f9c5f0..54fec53a48e 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 {
 	struct gpmc_timings t;
+	u32 reg;
+	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	return gpmc_cs_set_timings(cs, &t);
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+	return 0;
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
 		sync_read = 1;
 		sync_write = 1;
-	}
+	} else
+		return omap2_onenand_set_async_mode(cs, onenand_base);
 
 	if (!freq) {
 		/* Very first call freq is not known */
-- 
cgit v1.2.3


From c8e6488f7b56d82453fc7d526118e9f1c2df133a Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 23 Jun 2009 13:30:25 +0300
Subject: OMAP3: RX51: Use OneNAND sync read / write

Use OneNAND sync read / write

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index da93b86234e..9a0bf6744a0 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)
-- 
cgit v1.2.3


From f48ef99ca14577f3ea0a48c0e05ed7f5f6d211e9 Mon Sep 17 00:00:00 2001
From: Fernando Guzman Lugo <x0095840@ti.com>
Date: Tue, 23 Jun 2009 13:30:25 +0300
Subject: OMAP: IOMMU: function flush_iotlb_page is not flushing correct entry

The function flush_iotlb_page is not loading the CAM register with
the correct entry to be flushed, so it is flushing other entry

Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4cf449fa2cb..4a030139901 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -298,7 +298,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
-- 
cgit v1.2.3


From cb5793db5ecf108594d8006ae838e47996a76a19 Mon Sep 17 00:00:00 2001
From: janboe <janboe.ye@gmail.com>
Date: Tue, 23 Jun 2009 13:30:25 +0300
Subject: OMAP2/3: Initialize gpio debounce register

Some bootloader may initialize debounce register and this will make
dbclk not consist with the debounce register after linux kernel boot
up.

Signed-off-by: janboe <janboe.ye@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7fd89ba8d3b..26b387c1242 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1585,6 +1585,7 @@ static int __init _omap_gpio_init(void)
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_DEBOUNCE_EN);
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
-- 
cgit v1.2.3


From 291e99a112f9bf34c027031de7ef8b94a2692937 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 4 May 2009 09:30:51 +0100
Subject: [ARM] S3C24XX: Fix use of CONFIG_S3C24XX_PWM

CONFIG_S3C24XX_PWM was defined in arch/arm/plat-s3c24xx/Kconfig but
not used anywhere else as the corresponding makefile used
CONFIG_HAVE_PWM (selected by CONFIG_S3C24XX_PWM) to compile the PWM
driver.

Change the makefile to use CONFIG_S3C24XX_PWM to compile this driver
to ensure it is only build when needed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 636cb12711d..579a165c282 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
-- 
cgit v1.2.3


From a18327f35a879a6467c3e901da7f68944b191732 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Mon, 4 May 2009 09:53:12 +0100
Subject: [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT

Remove the unused CONFIG_DEBUG_S3C_PORT as we currently only have
support for using the S3C UARTs via the low-level debug code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig.debug                | 8 --------
 arch/arm/configs/s3c2410_defconfig    | 1 -
 arch/arm/configs/s3c6400_defconfig    | 1 -
 arch/arm/configs/tct_hammer_defconfig | 1 -
 4 files changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a71fd941ade..a89e4734b8f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 2d58b8fe59b..f4f1899f3c8 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -2298,7 +2298,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 2e8fa50e9a0..32860609e05 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 07dfb98df4f..9d32faef05f 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #
-- 
cgit v1.2.3


From bc33dc5ae7ed7a422ab1141d3bf81c6cee2a5050 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Tue, 16 Jun 2009 16:56:09 +0800
Subject: mx31: remove duplicated #include

Remove duplicated #include in arch/arm/mach-mx3/devices.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad4..9e87e08fb12 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
-- 
cgit v1.2.3


From c3a9c7f53a0eb1ec687ecf131f9cfb41bbdc26b5 Mon Sep 17 00:00:00 2001
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Date: Wed, 17 Jun 2009 15:05:21 +0200
Subject: ARM MXC: Armadillo 500 add NOR flash device support (resend).

This patch add support for NOR flash mapping through the physmap driver.
The purpose is to maintain the original Atmark partition model.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/armadillo5x0.c | 47 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 541181090b3..38d99e6c9d0 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -31,6 +31,7 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -96,6 +97,48 @@ static int armadillo5x0_pins[] = {
 
 };
 
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= CS0_BASE_ADDR,
+	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
+};
+
 /*
  * FB support
  */
@@ -272,6 +315,10 @@ static void __init armadillo5x0_init(void)
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
 }
 
 static void __init armadillo5x0_timer_init(void)
-- 
cgit v1.2.3


From 0c8bad6a26aefbcb7b3d8d1e5d97c53076ac99af Mon Sep 17 00:00:00 2001
From: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Date: Wed, 17 Jun 2009 15:06:30 +0200
Subject: Armadillo 500 add NAND flash device support (resend).

Since recent mxc_nand driver fixes from linux-mtd this patch
add support for ST NAND02GW3B2CN6 (2k pages flash) placed on the armadillo 500
motherboard.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/armadillo5x0.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 38d99e6c9d0..ee331fd6b1b 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -47,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -94,7 +97,14 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
 };
 
 /*
@@ -319,6 +329,12 @@ static void __init armadillo5x0_init(void)
 	/* Register NOR Flash */
 	mxc_register_device(&armadillo5x0_nor_flash,
 			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)
-- 
cgit v1.2.3


From 32c1ad9ab2ae4171d8f3dd0c70a611f799ad6775 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <lg@denx.de>
Date: Thu, 18 Jun 2009 12:40:48 +0200
Subject: pcm037: add MT9T031 camera support

Add support for the MT9T031 CMOS camera sensor from Aptina to the PCM037
board. Also add two I2C iomux pin definitions, needed for pcm037. Also
remove now unneeded #ifdef CONFIG_I2C_IMX.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c                 | 118 ++++++++++++++++++++++++++---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h |   2 +
 2 files changed, 108 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c6f61a1f06c..d7b29b724a6 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,22 +33,23 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
 
@@ -56,6 +57,8 @@ static unsigned int pcm037_pins[] = {
 	/* I2C */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -120,6 +123,22 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +269,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_2_devices[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
@@ -270,7 +313,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		.type = "pcf8563",
 	}
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +384,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -415,18 +497,30 @@ static void __init mxc_board_init(void)
 	}
 
 
-#ifdef CONFIG_I2C_IMX
+	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 	if (!gpio_usbotg_hs_activate())
 		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 27f8d1b2bc6..2eb182f7387 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -602,6 +602,8 @@ enum iomux_pins {
 #define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-- 
cgit v1.2.3


From 574ec547c7771881e18e4e76ca970e323bcdc774 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <lg@denx.de>
Date: Tue, 23 Jun 2009 13:26:23 +0200
Subject: ARM: add support for the EET board, based on the i.MX31 pcm037 module

The "EET" variant of the pcm037 board has an OLED display, using a S6E63D6
display controller on the first SPI interface, using GPIO57 as a chip-select
for it. S6E63D6 is initialised in the boot-loader, so we only have to take care
of the LCD. EET also adds several buttons and LEDs on GPIOs. This patch adds a
"pcm037_variant=" kernel command line parameter to specify at boot-time which
board the kernel is running on, default is "pcm970", specify "eet" for the EET
board.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/Kconfig      |   8 ++
 arch/arm/mach-mx3/Makefile     |   1 +
 arch/arm/mach-mx3/pcm037.c     |  65 +++++++++++--
 arch/arm/mach-mx3/pcm037.h     |  11 +++
 arch/arm/mach-mx3/pcm037_eet.c | 204 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 283 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/mach-mx3/pcm037.h
 create mode 100644 arch/arm/mach-mx3/pcm037_eet.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 17a21a291e2..851f2458bf6 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -36,6 +36,14 @@ config MACH_PCM037
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 0322696bd11..6b9775471be 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index d7b29b724a6..840cfda341d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -52,6 +52,41 @@
 #include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
 	/* I2C */
@@ -76,11 +111,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
@@ -459,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
 		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
 	},
 };
 
@@ -479,6 +525,14 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -542,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h
new file mode 100644
index 00000000000..d6929721a5f
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.h
@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c
new file mode 100644
index 00000000000..fe52fb1bb8b
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037_eet.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* SPI #1 */
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pcm037_gpio_keys_platform_data,
+	},
+};
+
+static int eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+	platform_device_register(&pcm037_gpio_keys_device);
+
+	return 0;
+}
+
+late_initcall(eet_init_devices);
-- 
cgit v1.2.3


From f49156ea1bf3bccf45a01351cf3db2b5f6a8597e Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 26 May 2009 10:21:42 -0500
Subject: powerpc/qe: add polling timeout to qe_issue_cmd()

The qe_issue_cmd() function (Freescale PowerPC QUICC Engine library) polls
on a register until a status bit changes, but does not include a timeout
to handle the situation if the bit never changes.  Change the code to use
the new spin_event_timeout() macro, which simplifies polling on a register
without a timeout.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/qe_lib/qe.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index b28b0e512d6..237e3654f48 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -112,6 +112,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 {
 	unsigned long flags;
 	u8 mcn_shift = 0, dev_shift = 0;
+	u32 ret;
 
 	spin_lock_irqsave(&qe_lock, flags);
 	if (cmd == QE_RESET) {
@@ -139,11 +140,13 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
 	}
 
 	/* wait for the QE_CR_FLG to clear */
-	while(in_be32(&qe_immr->cp.cecr) & QE_CR_FLG)
-		cpu_relax();
+	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
+			   100, 0);
+	/* On timeout (e.g. failure), the expression will be false (ret == 0),
+	   otherwise it will be true (ret == 1). */
 	spin_unlock_irqrestore(&qe_lock, flags);
 
-	return 0;
+	return ret == 1;
 }
 EXPORT_SYMBOL(qe_issue_cmd);
 
-- 
cgit v1.2.3


From 5e10cf587a7b1aa34099cbfc244e6f04e96dc835 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 19 May 2009 00:52:20 -0500
Subject: powerpc/cpm1: Remove IMAP_ADDR

We no longer user IMAP_ADDR for anything so kill it off.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/cpm1.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 2ff798744c1..7685ffde882 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -598,8 +598,6 @@ typedef struct risc_timer_pram {
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
 
-#define IMAP_ADDR		(get_immrbase())
-
 #define CPM_PIN_INPUT     0
 #define CPM_PIN_OUTPUT    1
 #define CPM_PIN_PRIMARY   0
-- 
cgit v1.2.3


From a44a23ed4d144e4fb83d256b32021b732bda4787 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 18 Jun 2009 23:28:34 -0500
Subject: powerpc/85xx: Stop using ppc_md.init on socrates

Match what other 85xx platforms do for of_platform_bus_probe and use
machine_device_initcall.  This is one small step in killing of
ppc_md.init.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/socrates.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c
index d0e8443b12c..747d8fb3ab8 100644
--- a/arch/powerpc/platforms/85xx/socrates.c
+++ b/arch/powerpc/platforms/85xx/socrates.c
@@ -102,10 +102,11 @@ static struct of_device_id __initdata socrates_of_bus_ids[] = {
 	{},
 };
 
-static void __init socrates_init(void)
+static int __init socrates_publish_devices(void)
 {
-	of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
+	return of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
 }
+machine_device_initcall(socrates, socrates_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -124,7 +125,6 @@ define_machine(socrates) {
 	.name			= "Socrates",
 	.probe			= socrates_probe,
 	.setup_arch		= socrates_setup_arch,
-	.init			= socrates_init,
 	.init_IRQ		= socrates_pic_init,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
-- 
cgit v1.2.3


From fa874618c3155e4f255387987d630a203578b5ae Mon Sep 17 00:00:00 2001
From: Randy Vinson <rvinson@mvista.com>
Date: Fri, 19 Jun 2009 03:22:08 +0400
Subject: powerpc/85xx: Fix FSL RapidIO probing on MDS boards

FSL RapidIO won't probe without a proper compatible entry. This
patch fixes the issue by adding fsl,rapidio-delta compatible to
mpc85xx_ids.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/mpc85xx_mds.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 77f90b35635..60ed9c067b1 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -285,6 +285,7 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,rapidio-delta", },
 	{},
 };
 
-- 
cgit v1.2.3


From cb1ffb6204712b04396ae0a9f3d1bf93cd8df8fb Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 19 Jun 2009 03:30:42 -0500
Subject: powerpc/85xx: Fix issue found by lockdep trace in smp_85xx_kick_cpu

lockdep trace found the following:

------------[ cut here ]------------
Badness at c007baf0 [verbose debug info unavailable]
NIP: c007baf0 LR: c007bad8 CTR: 00000000
REGS: ef855e00 TRAP: 0700   Tainted: G        W
(2.6.30-06736-g12a31df-dirty)
MSR: 00021000 <ME,CE>  CR: 24044022  XER: 20000000
TASK = ef858000[1] 'swapper' THREAD: ef854000 CPU: 0
GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff
GPR08: 000000d0 c0760000 c0710000 00000007 2fffffff 1004a388 7ffd9400 00000000
GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c059cd78 c075c498 c057da7c ffffffff
GPR24: ffbc8000 f1000000 00000001 c00bf8b0 c07595d4 000000d0 00021000 000000d0
NIP [c007baf0] lockdep_trace_alloc+0xc0/0xf0
LR [c007bad8] lockdep_trace_alloc+0xa8/0xf0
Call Trace:
[ef855eb0] [c007ba60] lockdep_trace_alloc+0x30/0xf0 (unreliable)
[ef855ec0] [c00cb3ac] kmem_cache_alloc+0x2c/0xf0
[ef855ee0] [c00bf8b0] __get_vm_area_node+0x80/0x1c0
[ef855f10] [c0017580] __ioremap_caller+0x1d0/0x1e0
[ef855f40] [c057da7c] smp_85xx_kick_cpu+0x64/0x124
[ef855f60] [c0599180] __cpu_up+0xd0/0x1a4
[ef855f80] [c05997c4] cpu_up+0x14c/0x1e0
[ef855fc0] [c05732a0] kernel_init+0x100/0x1c4
[ef855ff0] [c0011524] kernel_thread+0x4c/0x68
Instruction dump:
8009c174 2f800000 409e0048 73c08000 40820040 4818980d 2f830000 419effa0
3d20c076 8009c388 2f800000 409eff90 <0fe00000> 4bffff88 60000000 60000000

We were calling ioremap after we local_irq_restore(flags).  A simple
reorder fixes the problem.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/smp.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index cc0b0db8a6f..62c592ede64 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -52,20 +52,19 @@ smp_85xx_kick_cpu(int nr)
 
 	pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
 
-	local_irq_save(flags);
-
 	np = of_get_cpu_node(nr, NULL);
 	cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
 
 	if (cpu_rel_addr == NULL) {
 		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
-		local_irq_restore(flags);
 		return;
 	}
 
 	/* Map the spin table */
 	bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
 
+	local_irq_save(flags);
+
 	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, nr);
 	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
 
@@ -73,10 +72,10 @@ smp_85xx_kick_cpu(int nr)
 	while ((__secondary_hold_acknowledge != nr) && (++n < 1000))
 		mdelay(1);
 
-	iounmap(bptr_vaddr);
-
 	local_irq_restore(flags);
 
+	iounmap(bptr_vaddr);
+
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
 
-- 
cgit v1.2.3


From 6cc7959f385abc77abdeda5462f96407a556265a Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 20 Jun 2009 19:16:59 +0800
Subject: powerpc/85xx: remove duplicated #include

Remove duplicated #include in arch/powerpc/platforms/85xx/xes_mpc85xx.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/xes_mpc85xx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
index ee01532786e..1b426050a2f 100644
--- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -32,7 +32,6 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
-#include <linux/of_platform.h>
 
 /* A few bit definitions needed for fixups on some boards */
 #define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
-- 
cgit v1.2.3


From 66c6b856d8738278a4a6e558d25c90e9950aa112 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Fri, 19 Jun 2009 03:37:52 +0400
Subject: powerpc/85xx: Make eSDHC 1-bit only transfer mode default for
 MPC8569E-MDS

For yet unknown reason 4-bit mode doesn't work on MPC8569E-MDS boards,
so make 1-bit mode default. When we resolve the issue, u-boot will
remove sdhci,1-bit-only property from the device tree, while SDHCI
will still work with older u-boots.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8569mds.dts | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a8dcb018c4a..a680165292f 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -253,6 +253,7 @@
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
 			status = "disabled";
+			sdhci,1-bit-only;
 		};
 
 		crypto@30000 {
-- 
cgit v1.2.3


From 503dcbeba50fd3545283594bc391b4a400fa6c48 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Tue, 23 Jun 2009 16:55:30 +0300
Subject: OMAP: Fix IOMEM macro for assembly

Otherwise IOMEM calculations can fail.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/io.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 3b281472056..73f483d56ca 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -201,7 +201,7 @@
 #define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
 
 #ifdef __ASSEMBLER__
-#define IOMEM(x)		x
+#define IOMEM(x)		(x)
 #else
 #define IOMEM(x)		((void __force __iomem *)(x))
 
-- 
cgit v1.2.3


From 927dbcd668ede8d2210cc59bea548ca9ff45b240 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Tue, 23 Jun 2009 16:15:38 +0100
Subject: [ARM] S3C24XX: Fix spi-bus configuration build errors

The commit ec976d6eb021dc8f2994248c310a41540f4756bd
removed a number of gpio definitions from <mach/hardware.h>
but misssed updating these two files:

Fix the following build errors by including <linux/gpio.h>:
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c: In function 's3c24xx_spi_gpiocfg_bus1_gpg5_6_7':
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c:25: error: implicit declaration of function 's3c2410_gpio_cfgpin'
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c:28: error: implicit declaration of function 's3c2410_gpio_pullup'
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c: In function 's3c24xx_spi_gpiocfg_bus0_gpe11_12_13':
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c:25: error: implicit declaration of function 's3c2410_gpio_cfgpin'
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c:28: error: implicit declaration of function 's3c2410_gpio_pullup'

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 3 +--
 arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c    | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9edf7894eed..da7a61728c1 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index f34d0fc69ad..86b9edc6741 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -12,8 +12,7 @@
 */
 
 #include <linux/kernel.h>
-
-#include <mach/hardware.h>
+#include <linux/gpio.h>
 
 #include <mach/spi.h>
 #include <mach/regs-gpio.h>
-- 
cgit v1.2.3


From ffd14417bdf2a1650bcb16d37c7e658535d1681a Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Tue, 23 Jun 2009 20:58:57 +0800
Subject: [ARM] MINI2440: remove duplicated #include

Remove duplicated #include('s) in
  arch/arm/mach-s3c2440/mach-mini2440.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/mach-mini2440.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 6a5bc3021bd..e714bfabbc0 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -48,8 +48,6 @@
 #include <plat/mci.h>
 #include <plat/udc.h>
 
-#include <plat/regs-serial.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
-- 
cgit v1.2.3


From a3c79901170aba0d3717c2602326bab639eb1344 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 23 Jun 2009 16:30:02 +0100
Subject: [ARM] S3C24XX: Fix missing s3c_iis_device.

Commit 52da219e9664e537a745877b0efa7cf2b1ff2996 removed
the s3c_device_iis, but didn't replace it with anything
so a number of s3c24xx machines are currently failing
to build.

As a temporary fix, re-instate s3c_device_iis until a
proper replacement can be done for it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/devs.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index b5b9c4d46e9..2e170827e0b 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -37,6 +37,7 @@ extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_iis;
 extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
-- 
cgit v1.2.3


From b647712f669f4fadf428a14ab45ab4c03558cdf5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 23 Jun 2009 16:34:35 +0100
Subject: [ARM] S3C: Fix S3C24XX build to not include s3c64xx IIS devices

Commit 52da219e9664e537a745877b0efa7cf2b1ff2996 added IIS
platform devices, but these do not build on s3c24xx systems
and the file depends on SND_S3C24XX_SOC, which is selected
for all S3C64XX/S3C24XX systems.

As a quick fix, make the dev-audio.o file depends on
SND_S3C64XX_SOC_I2S instead.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 74bb7cb5da4..0761766b183 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
+obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-- 
cgit v1.2.3


From 622a8f5f7bf160507861cf05309020049f42976d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 23 Jun 2009 18:20:10 +0100
Subject: [ARM] s3c2410_defconfig: add MINI2440 machine to build

Add the MINI2440 to the list of machines built by the
central defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s3c2410_defconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f4f1899f3c8..b49810461e4 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
 
 #
 # S3C2442 Machines
-- 
cgit v1.2.3


From 51af243c631d9d03376d1454a24cf0a96e6f17cb Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 23 Jun 2009 18:23:27 +0100
Subject: [ARM] MINI2440: Add missing flash_bbt flat to NAND

The commit 9db41f9edcb87ae050fcb171c44be7f212728d54 added
the .flash_bbt flag to the nand set, so add this back into
the mach-mini2440.c file (taken out on initial commit to
allow build).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/mach-mini2440.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index e714bfabbc0..ec71a696578 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -273,6 +273,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
 		.nr_chips	= 1,
 		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
 		.partitions	= mini2440_default_nand_part,
+		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
 	},
 };
 
-- 
cgit v1.2.3


From 7262b6e4a4cc18d0f67df145d032c843e4bc382b Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Date: Tue, 23 Jun 2009 12:40:54 +0900
Subject: x86, mce: Fix mce resume on 32bit

Calling mcheck_init() on resume is required only with
CONFIG_X86_OLD_MCE=y.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/power/cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index d277ef1eea5..b3d20b9cac6 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -244,7 +244,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	do_fpu_end();
 	mtrr_ap_init();
 
-#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_OLD_MCE
 	mcheck_init(&boot_cpu_data);
 #endif
 }
-- 
cgit v1.2.3


From 76609a6928bff29ca05a94420ae3e088fbb9c2f9 Mon Sep 17 00:00:00 2001
From: Nelson Castillo <arhuaco@freaks-unidos.net>
Date: Tue, 23 Jun 2009 13:54:32 -0500
Subject: [ARM] GTA02: build fixes (s3c2410_nand_set usage)

This patch fixes two errors we get when building GTA02 kernel.

~ use_bbt is incorrect, we need flash_bbt.

~ We do not need .force_soft_ecc because we can unset
  CONFIG_MTD_NAND_S3C2410_HWECC.

Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net>
[ben-linux@fluff.org: updated patch description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2442/mach-gta02.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index e23b581aa0e..0fb385bd9cd 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -433,8 +433,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
 		 */
 		.name		= "neo1973-nand",
 		.nr_chips	= 1,
-		.use_bbt	= 1,
-		.force_soft_ecc	= 1,
+		.flash_bbt	= 1,
 	},
 };
 
-- 
cgit v1.2.3


From c9944881acf02b6f25fa62a0441a98b7dc0d7ae6 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Wed, 24 Jun 2009 13:42:40 +0800
Subject: crypto: aes-ni - Don't print message with KERN_ERR on old system

When the aes-intel module is loaded on a system that does not have the
AES instructions, it prints

    Intel AES-NI instructions are not detected.

at level KERN_ERR.  Since aes-intel is aliased to "aes" it will be tried
whenever anything uses AES and spam the console.  This doesn't match
existing practice for how to handle "no hardware" when initializing a
module, so downgrade the message to KERN_INFO.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/x86/crypto/aesni-intel_glue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index c580c5ec1ca..d3ec8d588d4 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -636,7 +636,7 @@ static int __init aesni_init(void)
 	int err;
 
 	if (!cpu_has_aes) {
-		printk(KERN_ERR "Intel AES-NI instructions are not detected.\n");
+		printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
 		return -ENODEV;
 	}
 	if ((err = crypto_register_alg(&aesni_alg)))
-- 
cgit v1.2.3


From e74e396204bfcb67570ba4517b08f5918e69afea Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 30 Mar 2009 19:07:44 +0900
Subject: percpu: use dynamic percpu allocator as the default percpu allocator

This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use
dynamic percpu allocator.  The first chunk is allocated using
embedding helper and 8k is reserved for modules.  This ensures that
the new allocator behaves almost identically to the original allocator
as long as static percpu variables are concerned, so it shouldn't
introduce much breakage.

s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing
range limit the addressing model imposes.  Unfortunately, this breaks
if the address is specified using a variable, so for now, the two
archs aren't converted.

The following architectures are affected by this change.

* sh
* arm
* cris
* mips
* sparc(32)
* blackfin
* avr32
* parisc (broken, under investigation)
* m32r
* powerpc(32)

As this change makes the dynamic allocator the default one,
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert -
CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted
archs.  These archs implement their own setup_per_cpu_areas() and the
conversion is not trivial.

* powerpc(64)
* sparc(64)
* ia64
* alpha
* s390

Boot and batch alloc/free tests on x86_32 with debug code (x86_32
doesn't use default first chunk initialization).  Compile tested on
sparc(32), powerpc(32), arm and alpha.

Kyle McMartin reported that this change breaks parisc.  The problem is
still under investigation and he is okay with pushing this patch
forward and fixing parisc later.

[ Impact: use dynamic allocator for most archs w/o custom percpu setup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/alpha/Kconfig   | 3 +++
 arch/ia64/Kconfig    | 3 +++
 arch/powerpc/Kconfig | 3 +++
 arch/s390/Kconfig    | 3 +++
 arch/sparc/Kconfig   | 3 +++
 arch/x86/Kconfig     | 3 ---
 6 files changed, 15 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 9fb8aae5c39..05d86407188 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -70,6 +70,9 @@ config AUTO_IRQ_AFFINITY
 	depends on SMP
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 170042b420d..328d2f8b8c3 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -89,6 +89,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedfa05d..a774c2acbe6 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -46,6 +46,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool PPC64
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a14dba0e4d6..f4a3cc62d28 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -75,6 +75,9 @@ config VIRT_CPU_ACCOUNTING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+
 mainmenu "Linux Kernel Configuration"
 
 config S390
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3f8b6a92eab..7a8698b913f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -92,6 +92,9 @@ config AUDIT_ARCH
 	bool
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y if SPARC64
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef6b4f..a48a90076d8 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -149,9 +149,6 @@ config ARCH_HAS_CACHE_LINE_SIZE
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
-config HAVE_DYNAMIC_PER_CPU_AREA
-	def_bool y
-
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
-- 
cgit v1.2.3


From 405d967dc70002991f8fc35c20e0d3cbc7614f63 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:38 +0900
Subject: linker script: throw away .discard section

x86 throws away .discard section but no other archs do.  Also,
.discard is not thrown away while linking modules.  Make every arch
and module linking throw it away.  This will be used to define dummy
variables for percpu declarations and definitions.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: always throw away everything in .discard ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/alpha/kernel/vmlinux.lds.S      | 1 +
 arch/arm/kernel/vmlinux.lds.S        | 1 +
 arch/avr32/kernel/vmlinux.lds.S      | 1 +
 arch/blackfin/kernel/vmlinux.lds.S   | 1 +
 arch/cris/kernel/vmlinux.lds.S       | 1 +
 arch/frv/kernel/vmlinux.lds.S        | 2 ++
 arch/h8300/kernel/vmlinux.lds.S      | 1 +
 arch/ia64/kernel/vmlinux.lds.S       | 1 +
 arch/m32r/kernel/vmlinux.lds.S       | 1 +
 arch/m68k/kernel/vmlinux-std.lds     | 1 +
 arch/m68k/kernel/vmlinux-sun3.lds    | 1 +
 arch/m68knommu/kernel/vmlinux.lds.S  | 1 +
 arch/microblaze/kernel/vmlinux.lds.S | 2 ++
 arch/mips/kernel/vmlinux.lds.S       | 1 +
 arch/mn10300/kernel/vmlinux.lds.S    | 1 +
 arch/parisc/kernel/vmlinux.lds.S     | 1 +
 arch/powerpc/kernel/vmlinux.lds.S    | 1 +
 arch/s390/kernel/vmlinux.lds.S       | 1 +
 arch/sh/kernel/vmlinux.lds.S         | 1 +
 arch/sparc/kernel/vmlinux.lds.S      | 1 +
 arch/um/kernel/dyn.lds.S             | 2 ++
 arch/um/kernel/uml.lds.S             | 2 ++
 arch/xtensa/kernel/vmlinux.lds.S     | 1 +
 23 files changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index b9d6568e5f7..75fe1d6877e 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -139,6 +139,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	.mdebug 0 : {
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 6c077979254..e256c57b898 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -82,6 +82,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 		*(.ARM.exidx.exit.text)
 		*(.ARM.extab.exit.text)
 #ifndef CONFIG_MMU
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index 7910d41eb88..b8324608ec0 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -131,6 +131,7 @@ SECTIONS
 	/DISCARD/       	: {
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	DWARF_DEBUG
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 6ac307ca0d8..6e8eabd8f0a 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -280,5 +280,6 @@ SECTIONS
 	/DISCARD/ :
 	{
 		*(.exitcall.exit)
+		*(.discard)
 	}
 }
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 0d2adfc794d..a3175ebb38c 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -145,6 +145,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
         }
 
 	dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024;
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index 22d9787406e..64b5a5e4d35 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -177,6 +177,8 @@ SECTIONS
   .debug_ranges		0 : { *(.debug_ranges) }
 
   .comment 0 : { *(.comment) }
+
+  /DISCARD/ : { *(.discard) }
 }
 
 __kernel_image_size_no_bss = __bss_start - __kernel_image_start;
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 43a87b9085b..03d6c0df33d 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -154,6 +154,7 @@ SECTIONS
 	}
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 	}
         .romfs :	
 	{
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 4a95e86b9ac..13d95897587 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -29,6 +29,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	*(.IA_64.unwind.exit.text)
 	*(.IA_64.unwind_info.exit.text)
 	}
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 4179adf6c62..480a49944cf 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -125,6 +125,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   /* Stabs debugging sections.  */
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 01d212bb05a..905a797ada9 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -87,6 +87,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   /* Stabs debugging sections.  */
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index c192f773db9..47d04be322a 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -82,6 +82,7 @@ __init_begin = .;
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   .crap : {
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index b7fe505e358..68111a61a77 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -188,6 +188,7 @@ SECTIONS {
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	.bss : {
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index d34d38dcd12..a207543c592 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -162,4 +162,6 @@ SECTIONS {
 	}
 	. = ALIGN(4096);
 	_end = .;
+
+	/DISCARD/ : { *(.discard) }
 }
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 58738c8d754..45901609b74 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -179,6 +179,7 @@ SECTIONS
 	/* Sections to be discarded */
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 
 		/* ABI crap starts here */
 		*(.MIPS.options)
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 24de6b90f40..5d9f2f96ad9 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -146,6 +146,7 @@ SECTIONS
   /* Sections to be discarded */
   /DISCARD/ : {
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   STABS_DEBUG
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index fd2cc4fd2b6..ccf58341845 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -240,6 +240,7 @@ SECTIONS
 	/* Sections to be discarded */
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 #ifdef CONFIG_64BIT
 		/* temporary hack until binutils is fixed to not emit these
 	 	 * for static binaries
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 8ef8a14abc9..7fca9355fd3 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -40,6 +40,7 @@ SECTIONS
 	/* Sections to be discarded. */
 	/DISCARD/ : {
 	*(.exitcall.exit)
+	*(.discard)
 	EXIT_DATA
 	}
 
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index a53db23ee09..98867dfea46 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -161,6 +161,7 @@ SECTIONS
 	/DISCARD/ : {
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	/* Debugging sections.	*/
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index f53c76acaed..766976d27b2 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -171,6 +171,7 @@ SECTIONS
 	 */
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	STABS_DEBUG
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index fcbbd000ec0..d63cf914667 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -175,6 +175,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	STABS_DEBUG
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 9975e1ab44f..2916d6eadff 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -156,4 +156,6 @@ SECTIONS
   STABS_DEBUG
 
   DWARF_DEBUG
+
+  /DISCARD/	: { *(.discard) }
 }
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 11b835248b8..1f8a622cabe 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -100,4 +100,6 @@ SECTIONS
   STABS_DEBUG
 
   DWARF_DEBUG
+
+  /DISCARD/	: { *(.discard) }
 }
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 41c159cd872..b1e24638acd 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -287,6 +287,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
         *(.exitcall.exit)
+	*(.discard)
   }
 
   .xt.lit : { *(.xt.lit) }
-- 
cgit v1.2.3


From fe87f94f341a4b4097285b46f003059b26eb59bf Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Wed, 24 Jun 2009 15:13:41 +0900
Subject: CRIS: Change DEFINE_PER_CPU of current_pgd to be non volatile.

The DEFINE_PER_CPU of current_pgd was on CRIS defined using volatile,
which is not needed. Remove volatile.

Tested on an ARTPEC-3 (CRISv32) board.

tj: extern DEFINE_PER_CPU() replaced with DECLARE_PER_CPU()

[ Impact: code cleanup ]

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/cris/include/asm/mmu_context.h | 3 ++-
 arch/cris/mm/fault.c                | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/cris/include/asm/mmu_context.h b/arch/cris/include/asm/mmu_context.h
index 72ba08dcfd1..1d45fd6365b 100644
--- a/arch/cris/include/asm/mmu_context.h
+++ b/arch/cris/include/asm/mmu_context.h
@@ -17,7 +17,8 @@ extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
  * registers like cr3 on the i386
  */
 
-extern volatile DEFINE_PER_CPU(pgd_t *,current_pgd); /* defined in arch/cris/mm/fault.c */
+/* defined in arch/cris/mm/fault.c */
+DECLARE_PER_CPU(pgd_t *, current_pgd);
 
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index f925115e325..4a7cdd9ea1e 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -29,7 +29,7 @@ extern void die_if_kernel(const char *, struct pt_regs *, long);
 
 /* current active page directory */
 
-volatile DEFINE_PER_CPU(pgd_t *,current_pgd);
+DEFINE_PER_CPU(pgd_t *, current_pgd);
 unsigned long cris_signal_return_page;
 
 /*
-- 
cgit v1.2.3


From 204fba4aa303ea4a7bb726a539bf4a5b9e3203d0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:45 +0900
Subject: percpu: cleanup percpu array definitions

Currently, the following three different ways to define percpu arrays
are in use.

1. DEFINE_PER_CPU(elem_type[array_len], array_name);
2. DEFINE_PER_CPU(elem_type, array_name[array_len]);
3. DEFINE_PER_CPU(elem_type, array_name)[array_len];

Unify to #1 which correctly separates the roles of the two parameters
and thus allows more flexibility in the way percpu variables are
defined.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm@kvack.org
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
---
 arch/ia64/kernel/smp.c               | 2 +-
 arch/ia64/sn/kernel/setup.c          | 2 +-
 arch/powerpc/mm/stab.c               | 2 +-
 arch/powerpc/platforms/ps3/smp.c     | 2 +-
 arch/x86/kernel/cpu/cpu_debug.c      | 4 ++--
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +-
 arch/x86/kernel/cpu/perf_counter.c   | 2 +-
 7 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index f0c521b0ba4..94cf78ba28f 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,7 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short [NR_CPUS], shadow_flush_counts) ____cacheline_aligned;
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index e456f062f24..ece1bf99449 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
 EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
 
-DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
+DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
 EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 98cd1dc2ae7..6e9b69c9985 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -31,7 +31,7 @@ struct stab_entry {
 
 #define NR_STAB_CACHE_ENTRIES 8
 static DEFINE_PER_CPU(long, stab_cache_ptr);
-static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
+static DEFINE_PER_CPU(long [NR_STAB_CACHE_ENTRIES], stab_cache);
 
 /*
  * Create a segment table entry for the given esid/vsid pair.
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index f6e04bcc70e..51ffde40af2 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -37,7 +37,7 @@
   */
 
 #define MSG_COUNT 4
-static DEFINE_PER_CPU(unsigned int, ps3_ipi_virqs[MSG_COUNT]);
+static DEFINE_PER_CPU(unsigned int [MSG_COUNT], ps3_ipi_virqs);
 
 static void do_message_pass(int target, int msg)
 {
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
index 6b2a52dd040..dca325c0399 100644
--- a/arch/x86/kernel/cpu/cpu_debug.c
+++ b/arch/x86/kernel/cpu/cpu_debug.c
@@ -30,8 +30,8 @@
 #include <asm/apic.h>
 #include <asm/desc.h>
 
-static DEFINE_PER_CPU(struct cpu_cpuX_base, cpu_arr[CPU_REG_ALL_BIT]);
-static DEFINE_PER_CPU(struct cpu_private *, priv_arr[MAX_CPU_FILES]);
+static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpu_arr);
+static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], priv_arr);
 static DEFINE_PER_CPU(int, cpu_priv_count);
 
 static DEFINE_MUTEX(cpu_debug_lock);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index ddae21620bd..bd2a2fa8462 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -69,7 +69,7 @@ struct threshold_bank {
 	struct threshold_block	*blocks;
 	cpumask_var_t		cpus;
 };
-static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
+static DEFINE_PER_CPU(struct threshold_bank * [NR_BANKS], threshold_banks);
 
 #ifdef CONFIG_SMP
 static unsigned char shared_bank[NR_BANKS] = {
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef23f78..4946288d683 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -862,7 +862,7 @@ amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 	x86_pmu_disable_counter(hwc, idx);
 }
 
-static DEFINE_PER_CPU(u64, prev_left[X86_PMC_IDX_MAX]);
+static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], prev_left);
 
 /*
  * Set the next IRQ period, based on the hwc->period_left value.
-- 
cgit v1.2.3


From b9bf3121af348d9255f1c917830fe8c2df52efcb Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:47 +0900
Subject: percpu: use DEFINE_PER_CPU_SHARED_ALIGNED()

There are a few places where ___cacheline_aligned* is used with
DEFINE_PER_CPU().  Use DEFINE_PER_CPU_SHARED_ALIGNED() instead.

DEFINE_PER_CPU_SHARED_ALIGNED() applies alignment only on SMPs.  While
all other converted places used _in_smp variant or only get compiled
for SMP, net/rds used unconditional ____cacheline_aligned.  I don't
see any reason these data structures should be aligned on UP and thus
converted together.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andy Grover <andy.grover@oracle.com>
---
 arch/blackfin/mm/sram-alloc.c | 6 +++---
 arch/ia64/kernel/smp.c        | 3 ++-
 2 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index 0bc3c4ef0aa..99e4dbb1dfd 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -42,9 +42,9 @@
 #include <asm/mem_map.h>
 #include "blackfin_sram.h"
 
-static DEFINE_PER_CPU(spinlock_t, l1sram_lock) ____cacheline_aligned_in_smp;
-static DEFINE_PER_CPU(spinlock_t, l1_data_sram_lock) ____cacheline_aligned_in_smp;
-static DEFINE_PER_CPU(spinlock_t, l1_inst_sram_lock) ____cacheline_aligned_in_smp;
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock);
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock);
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock);
 static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 94cf78ba28f..93ebfea43c6 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,8 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned short [NR_CPUS], shadow_flush_counts) ____cacheline_aligned;
+static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned short [NR_CPUS],
+				     shadow_flush_counts);
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
-- 
cgit v1.2.3


From 245b2e70eabd797932adb263a65da0bab3711753 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:48 +0900
Subject: percpu: clean up percpu variable definitions

Percpu variable definition is about to be updated such that all percpu
symbols including the static ones must be unique.  Update percpu
variable definitions accordingly.

* as,cfq: rename ioc_count uniquely

* cpufreq: rename cpu_dbs_info uniquely

* xen: move nesting_count out of xen_evtchn_do_upcall() and rename it

* mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and
  rename it

* ipv4,6: rename cookie_scratch uniquely

* x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to
  pmc_irq_entry and nmi_entry to pmc_nmi_entry

* perf_counter: rename disable_count to perf_disable_count

* ftrace: rename test_event_disable to ftrace_test_event_disable

* kmemleak: rename test_pointer to kmemleak_test_pointer

* mce: rename next_interval to mce_next_interval

[ Impact: percpu usage cleanups, no duplicate static percpu var names ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
---
 arch/x86/kernel/cpu/mcheck/mce.c   |  8 ++++----
 arch/x86/kernel/cpu/perf_counter.c | 14 +++++++-------
 2 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968b..cba8cd3e957 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1091,7 +1091,7 @@ void mce_log_therm_throt_event(__u64 status)
  */
 static int check_interval = 5 * 60; /* 5 minutes */
 
-static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
+static DEFINE_PER_CPU(int, mce_next_interval); /* in jiffies */
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
 static void mcheck_timer(unsigned long data)
@@ -1110,7 +1110,7 @@ static void mcheck_timer(unsigned long data)
 	 * Alert userspace if needed.  If we logged an MCE, reduce the
 	 * polling interval, otherwise increase the polling interval.
 	 */
-	n = &__get_cpu_var(next_interval);
+	n = &__get_cpu_var(mce_next_interval);
 	if (mce_notify_irq())
 		*n = max(*n/2, HZ/100);
 	else
@@ -1311,7 +1311,7 @@ static void mce_cpu_features(struct cpuinfo_x86 *c)
 static void mce_init_timer(void)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
-	int *n = &__get_cpu_var(next_interval);
+	int *n = &__get_cpu_var(mce_next_interval);
 
 	if (mce_ignore_ce)
 		return;
@@ -1914,7 +1914,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
 		t->expires = round_jiffies(jiffies +
-						__get_cpu_var(next_interval));
+					   __get_cpu_var(mce_next_interval));
 		add_timer_on(t, cpu);
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
 		break;
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 4946288d683..5fdf63aaaba 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -862,7 +862,7 @@ amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 	x86_pmu_disable_counter(hwc, idx);
 }
 
-static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], prev_left);
+static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
 
 /*
  * Set the next IRQ period, based on the hwc->period_left value.
@@ -901,7 +901,7 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 	if (left > x86_pmu.max_period)
 		left = x86_pmu.max_period;
 
-	per_cpu(prev_left[idx], smp_processor_id()) = left;
+	per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
 
 	/*
 	 * The hw counter starts counting from this counter offset,
@@ -1089,7 +1089,7 @@ void perf_counter_print_debug(void)
 		rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl);
 		rdmsrl(x86_pmu.perfctr  + idx, pmc_count);
 
-		prev_left = per_cpu(prev_left[idx], cpu);
+		prev_left = per_cpu(pmc_prev_left[idx], cpu);
 
 		pr_info("CPU#%d:   gen-PMC%d ctrl:  %016llx\n",
 			cpu, idx, pmc_ctrl);
@@ -1561,8 +1561,8 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 		entry->ip[entry->nr++] = ip;
 }
 
-static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
-static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry);
 
 
 static void
@@ -1709,9 +1709,9 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	struct perf_callchain_entry *entry;
 
 	if (in_nmi())
-		entry = &__get_cpu_var(nmi_entry);
+		entry = &__get_cpu_var(pmc_nmi_entry);
 	else
-		entry = &__get_cpu_var(irq_entry);
+		entry = &__get_cpu_var(pmc_irq_entry);
 
 	entry->nr = 0;
 
-- 
cgit v1.2.3


From 6088464cf1ae9fb3d2ccc0ec5feb3f5b971098d8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:52 +0900
Subject: alpha: kill unnecessary __used attribute in PER_CPU_ATTRIBUTES

With the previous percpu variable definition change, all percpu
variables are global and there's no need to specify __used, which only
triggers on recent compilers anyway.  Kill it.

[ Impact: remove unnecessary percpu attribute ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
---
 arch/alpha/include/asm/percpu.h | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a4afd..7f0a9c4f2fd 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,8 +48,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
-
 #endif /* MODULE */
 
 /*
@@ -71,8 +68,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
-
 #endif /* SMP */
 
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From 9b7dbc7dc0365a943af2d73b1376a6f0aac5dc0d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:52 +0900
Subject: alpha: switch to dynamic percpu allocator

Alpha implements custom SHIFT_PERCPU_PTR for modules because percpu
area can be located far away from the 4G area where the module text is
located.  The custom SHIFT_PERCPU_PTR forces GOT usage using ldq
instruction with literal relocation; however, the relocation can't be
used with dynamically allocated percpu variables.  Fortunately,
similar result can be achieved by using weak percpu variable
definitions.

This patch makes alpha use weak definitions and switch to dynamic
percpu allocator.

asm/tlbflush.h was getting linux/sched.h via asm/percpu.h which no
longer needs it.  Include linux/sched.h directly in asm/tlbflush.h.

Compile tested.  Generation of litereal relocation verified.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: use dynamic percpu allocator ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
---
 arch/alpha/Kconfig                |  3 --
 arch/alpha/include/asm/percpu.h   | 95 ++++-----------------------------------
 arch/alpha/include/asm/tlbflush.h |  1 +
 3 files changed, 9 insertions(+), 90 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 05d86407188..9fb8aae5c39 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -70,9 +70,6 @@ config AUTO_IRQ_AFFINITY
 	depends on SMP
 	default y
 
-config HAVE_LEGACY_PER_CPU_AREA
-	def_bool y
-
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 7f0a9c4f2fd..2c12378e3aa 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -1,97 +1,18 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
 
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <linux/percpu-defs.h>
-
 /*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
-
-#ifdef CONFIG_SMP
-
-/*
- * per_cpu_offset() is the offset that has to be added to a
- * percpu variable to get to the instance for a certain processor.
- */
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
-#ifdef CONFIG_DEBUG_PREEMPT
-#define my_cpu_offset per_cpu_offset(smp_processor_id())
-#else
-#define my_cpu_offset __my_cpu_offset
-#endif
-
-#ifndef MODULE
-#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#else
-/*
- * To calculate addresses of locally defined variables, GCC uses 32-bit
- * displacement from the GP. Which doesn't work for per cpu variables in
- * modules, as an offset to the kernel per cpu area is way above 4G.
+ * To calculate addresses of locally defined variables, GCC uses
+ * 32-bit displacement from the GP. Which doesn't work for per cpu
+ * variables in modules, as an offset to the kernel per cpu area is
+ * way above 4G.
  *
- * This forces allocation of a GOT entry for per cpu variable using
- * ldq instruction with a 'literal' relocation.
- */
-#define SHIFT_PERCPU_PTR(var, offset) ({		\
-	extern int simple_identifier_##var(void);	\
-	unsigned long __ptr, tmp_gp;			\
-	asm (  "br	%1, 1f		  	      \n\
-	1:	ldgp	%1, 0(%1)	    	      \n\
-		ldq %0, per_cpu__" #var"(%1)\t!literal"		\
-		: "=&r"(__ptr), "=&r"(tmp_gp));		\
-	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
-
-#endif /* MODULE */
-
-/*
- * A percpu variable may point to a discarded regions. The following are
- * established ways to produce a usable pointer from the percpu variable
- * offset.
+ * Always use weak definitions for percpu variables in modules.
  */
-#define per_cpu(var, cpu) \
-	(*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
-#define __get_cpu_var(var) \
-	(*SHIFT_PERCPU_PTR(var, my_cpu_offset))
-#define __raw_get_cpu_var(var) \
-	(*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
-
-#else /* ! SMP */
-
-#define per_cpu(var, cpu)		(*((void)(cpu), &per_cpu_var(var)))
-#define __get_cpu_var(var)		per_cpu_var(var)
-#define __raw_get_cpu_var(var)		per_cpu_var(var)
-
-#endif /* SMP */
-
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
+#if defined(MODULE) && defined(CONFIG_SMP)
+#define ARCH_NEEDS_WEAK_PER_CPU
 #endif
 
-#define PER_CPU_ATTRIBUTES
+#include <asm-generic/percpu.h>
 
 #endif /* __ALPHA_PERCPU_H */
diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index 9d87aaa08c0..e89e0c2e15b 100644
--- a/arch/alpha/include/asm/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
@@ -2,6 +2,7 @@
 #define _ALPHA_TLBFLUSH_H
 
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <asm/compiler.h>
 #include <asm/pgalloc.h>
 
-- 
cgit v1.2.3


From 9a0ef2923abd2cc2c6f78d3663ac7af34c0220e8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:53 +0900
Subject: s390: switch to dynamic percpu allocator

64bit s390 shares the same problem with alpha regarding percpu symbol
addressing from modules.  It needs assembly magic to force GOTENT
reference when building module as the percpu address will be outside
the usual 4G range from the module text.  This can be solved by using
weak percpu variable definitions.

This patch makes s390 use weak definitions and switch to dynamic
percpu allocator.  Please note that weak attribute is not added if
!SMP as percpu variables behave exactly the same as normal variables
on UP.

Compile tested.  Generation of GOTENT reference verified.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: use dynamic percpu allocator ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/s390/Kconfig              |  3 ---
 arch/s390/include/asm/percpu.h | 32 ++++++++------------------------
 2 files changed, 8 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index f4a3cc62d28..a14dba0e4d6 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -75,9 +75,6 @@ config VIRT_CPU_ACCOUNTING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
-config HAVE_LEGACY_PER_CPU_AREA
-	def_bool y
-
 mainmenu "Linux Kernel Configuration"
 
 config S390
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
index 408d60b4f75..f7ad8719d02 100644
--- a/arch/s390/include/asm/percpu.h
+++ b/arch/s390/include/asm/percpu.h
@@ -1,37 +1,21 @@
 #ifndef __ARCH_S390_PERCPU__
 #define __ARCH_S390_PERCPU__
 
-#include <linux/compiler.h>
-#include <asm/lowcore.h>
-
 /*
  * s390 uses its own implementation for per cpu data, the offset of
  * the cpu local data area is cached in the cpu's lowcore memory.
- * For 64 bit module code s390 forces the use of a GOT slot for the
- * address of the per cpu variable. This is needed because the module
- * may be more than 4G above the per cpu area.
  */
-#if defined(__s390x__) && defined(MODULE)
-
-#define SHIFT_PERCPU_PTR(ptr,offset) (({			\
-	extern int simple_identifier_##var(void);	\
-	unsigned long *__ptr;				\
-	asm ( "larl %0, %1@GOTENT"		\
-	    : "=a" (__ptr) : "X" (ptr) );		\
-	(typeof(ptr))((*__ptr) + (offset));	}))
-
-#else
-
-#define SHIFT_PERCPU_PTR(ptr, offset) (({				\
-	extern int simple_identifier_##var(void);		\
-	unsigned long __ptr;					\
-	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
-	(typeof(ptr)) (__ptr + (offset)); }))
+#define __my_cpu_offset S390_lowcore.percpu_offset
 
+/*
+ * For 64 bit module code, the module may be more than 4G above the
+ * per cpu area, use weak definitions to force the compiler to
+ * generate external references.
+ */
+#if defined(CONFIG_SMP) && defined(__s390x__) && defined(MODULE)
+#define ARCH_NEEDS_WEAK_PER_CPU
 #endif
 
-#define __my_cpu_offset S390_lowcore.percpu_offset
-
 #include <asm-generic/percpu.h>
 
 #endif /* __ARCH_S390_PERCPU__ */
-- 
cgit v1.2.3


From c14dab5c0782ef632742963a66276a195418a63c Mon Sep 17 00:00:00 2001
From: Yong Wang <yong.y.wang@linux.intel.com>
Date: Wed, 24 Jun 2009 10:13:24 +0800
Subject: perf_counter, x86: Set global control MSR correctly

Previous code made an assumption that the power on value of global
control MSR has enabled all fixed and general purpose counters properly.

However, this is not the case for certain Intel processors, such as
Atom - and it might also be firmware dependent.

Each enable bit in IA32_PERF_GLOBAL_CTRL is AND'ed with the
enable bits for all privilege levels in the respective IA32_PERFEVTSELx
or IA32_PERF_FIXED_CTR_CTRL MSRs to start/stop the counting of
respective counters. Counting is enabled if the AND'ed results is true;
counting is disabled when the result is false.

The end result is that all fixed counters are always disabled on Atom
processors because the assumption is just invalid.

Fix this by not initializing the ctrl-mask out of the global MSR,
but setting it to perf_counter_mask.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090624021324.GA2788@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 22eb3a1d4f9..a310d19faca 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -969,13 +969,6 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
-	/*
-	 * Quirk, IA32_FIXED_CTRs do not work on current Atom processors:
-	 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
-					boot_cpu_data.x86_model == 28)
-		return -1;
-
 	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
 
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
@@ -1428,8 +1421,6 @@ static int intel_pmu_init(void)
 	 */
 	x86_pmu.num_counters_fixed	= max((int)edx.split.num_counters_fixed, 3);
 
-	rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
 	/*
 	 * Install the hw-cache-events table:
 	 */
@@ -1514,6 +1505,7 @@ void __init init_hw_perf_counters(void)
 
 	perf_counter_mask |=
 		((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
+	x86_pmu.intel_ctrl = perf_counter_mask;
 
 	perf_counters_lapic_init();
 	register_die_notifier(&perf_counter_nmi_notifier);
-- 
cgit v1.2.3


From bf4bb2b1f285ec56e7f3cbf0190761b42131871c Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 16:57:03 +0900
Subject: sparc64: fix build breakage introduced by percpu-convert-most
 patchset

Commit e74e396204bfcb67570ba4517b08f5918e69afea incorrectly added
HAVE_LEGACY_PER_CPU_AREA to sparc64 although it already has been
converted to dynamic percpu allocator.  Drop both
HAVE_{LEGACY|DYNAMIC}_PER_CPU_AREA.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 7a8698b913f..4f6ed0f113f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -92,15 +92,9 @@ config AUDIT_ARCH
 	bool
 	default y
 
-config HAVE_LEGACY_PER_CPU_AREA
-	def_bool y if SPARC64
-
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
-config HAVE_DYNAMIC_PER_CPU_AREA
-	def_bool y if SPARC64
-
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
-- 
cgit v1.2.3


From d94d4adb7dd05b4e25f3c317a1b932ec74272a12 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 24 Jun 2009 22:35:30 +0900
Subject: sh: make set_perf_counter_pending() static inline.

Fixes up a recently introduced build error.

Reported-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/perf_counter.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2aa6f..61c2b40c802 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,6 @@
 #define __ASM_SH_PERF_COUNTER_H
 
 /* SH only supports software counters through this interface. */
-#define set_perf_counter_pending()	do { } while (0)
+static inline void set_perf_counter_pending(void) {}
 
 #endif /* __ASM_SH_PERF_COUNTER_H */
-- 
cgit v1.2.3


From 9c26f52b900f7207135bafc8789e1a4f5d43e096 Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Wed, 24 Jun 2009 09:41:59 -0500
Subject: x86: Fix uv bau sending buffer initialization

The initialization of the UV Broadcast Assist Unit's sending
buffers was making an invalid assumption about the
initialization of an MMR that defines its address.

The BIOS will not be providing that MMR.  So
uv_activation_descriptor_init() should unconditionally set it.

Tested on UV simulator.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org> # for v2.6.30.x
LKML-Reference: <E1MJTfj-0005i1-W8@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 124d40c575d..8ccabb8a2f6 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -711,7 +711,6 @@ uv_activation_descriptor_init(int node, int pnode)
 	unsigned long pa;
 	unsigned long m;
 	unsigned long n;
-	unsigned long mmr_image;
 	struct bau_desc *adp;
 	struct bau_desc *ad2;
 
@@ -727,12 +726,8 @@ uv_activation_descriptor_init(int node, int pnode)
 	n = pa >> uv_nshift;
 	m = pa & uv_mmask;
 
-	mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE);
-	if (mmr_image) {
-		uv_write_global_mmr64(pnode, (unsigned long)
-				      UVH_LB_BAU_SB_DESCRIPTOR_BASE,
-				      (n << UV_DESC_BASE_PNODE_SHIFT | m));
-	}
+	uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
+			      (n << UV_DESC_BASE_PNODE_SHIFT | m));
 
 	/*
 	 * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
-- 
cgit v1.2.3


From 7433ab770327b471399f7b5baacad78e160b5393 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 25 Jun 2009 02:30:10 +0900
Subject: sh: Hook up page fault events for software perf counters.

This adds page fault instrumentation for the software performance
counters. Follows the x86 and powerpc changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/fault_32.c | 61 +++++++++++++++++++++++++++------------------------
 1 file changed, 32 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbdf3d7..71925946f1e 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+#ifdef CONFIG_KPROBES
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+#endif
+
+	return ret;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	mm = tsk->mm;
+
+	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+		return;
+
 	/* Only enable interrupts if they were on before the fault */
-	if ((regs->sr & SR_IMASK) != SR_IMASK) {
-		trace_hardirqs_on();
+	if ((regs->sr & SR_IMASK) != SR_IMASK)
 		local_irq_enable();
-	}
 
-	mm = tsk->mm;
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -141,10 +160,15 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	up_read(&mm->mmap_sem);
 	return;
@@ -245,22 +269,6 @@ do_sigbus:
 		goto no_context;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
-	int ret = 0;
-
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
-		preempt_disable();
-		if (kprobe_running() && kprobe_fault_handler(regs, trap))
-			ret = 1;
-		preempt_enable();
-	}
-#endif
-
-	return ret;
-}
-
 /*
  * Called with interrupts disabled.
  */
@@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 0;
-
-	if (notify_page_fault(regs, lookup_exception_vector()))
-		goto out;
-
-	ret = 1;
+	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
-- 
cgit v1.2.3


From 163b2f0ba93e9298b3d5fff2337d860c3872ec60 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 25 Jun 2009 02:49:03 +0900
Subject: sh64: Hook up page fault events for software perf counters.

sh64 can use these as well, so tie them up there as well.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/tlbflush_64.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e135ce..3ce40ea3482 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
  * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/perf_counter.h>
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	/* Not an IO address, so reenable interrupts */
 	local_irq_enable();
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -195,10 +198,16 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	/* If we get here, the page fault has been handled.  Do the TLB refill
 	   now from the newly-setup PTE, to avoid having to fault again right
-- 
cgit v1.2.3


From 1fbcf37128cc19bd67d9a736fb634dc444e907d7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 25 Jun 2009 21:17:19 +0900
Subject: sh: Kill off unused DEBUG_BOOTMEM symbol.

This was killed off in generic code some time ago, kill off the left over
symbol.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5bd02..39224b57c6e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_BOOTMEM
-	depends on DEBUG_KERNEL
-	bool "Debug BOOTMEM initialization"
-
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
-- 
cgit v1.2.3


From 7aa5514e7170c6179272bc638a980adc1738fd29 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@nokia.com>
Date: Mon, 22 Jun 2009 09:23:36 +0100
Subject: [ARM] 5560/1: Avoid buffer overrun in case of an invalid IRQ

handle_bad_irq() expects the IRQ number to be valid (used for statistics),
so it cannot be called with an illegal vector. The problem was reported
by a static analysis tool.

The change makes bad_irq_desc redundant, so delete it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/irq.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 096f600dc8d..b7c3490eaa2 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -98,17 +98,6 @@ unlock:
 	return 0;
 }
 
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(irq, &bad_irq_desc);
-	else
+	if (unlikely(irq >= NR_IRQS)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
 		generic_handle_irq(irq);
+	}
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
 	for (irq = 0; irq < NR_IRQS; irq++)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
-#ifdef CONFIG_SMP
-	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.node = smp_processor_id();
-#endif
 	init_arch_irq();
 }
 
-- 
cgit v1.2.3


From f6430a938dc6d77e33722aaf6a58382b3423935d Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Wed, 24 Jun 2009 23:38:56 +0100
Subject: [ARM] 5565/2: Use PAGE_SIZE and RO_DATA() in link script

Update the link script for ARM to use PAGE_SIZE instead of hard-
coded 4096. Also the old RODATA macro is deprecated
for the RO_DATA(PAGE_SIZE) macro. As a consequence the PAGE_SIZE
was changed from (1UL << PAGE_SHIFT) to (_AC(1,UL) << PAGE_SHIFT)
because the linker does not understand the "UL" suffix to numeric
constants.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/page.h   |  2 +-
 arch/arm/kernel/vmlinux.lds.S | 15 ++++++++-------
 2 files changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index be962c1349c..9c746af1bf6 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -12,7 +12,7 @@
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 4340bf3d2c8..69371028a20 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/page.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
 			usr/built-in.o(.init.ramfs)
 		__initramfs_end = .;
 #endif
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 	}
@@ -118,7 +119,7 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	_etext = .;			/* End of text and rodata section */
 
@@ -158,17 +159,17 @@ SECTIONS
 		*(.data.init_task)
 
 #ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_begin = .;
 		*(.data.nosave)
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
 		/*
-- 
cgit v1.2.3


From ab420e6d9c2511b862d753b70efb4e979faa0714 Mon Sep 17 00:00:00 2001
From: Paul Menage <menage@google.com>
Date: Thu, 25 Jun 2009 00:17:15 -0700
Subject: UML: Fix some apparent bitrot

UML: Fix some apparent bitrot

- migration of net_device methods into net_device_ops
- dma_sync_single() changes

Signed-off-by: Paul Menage <menage@google.com>
Acked-by: Amerigo Wang <xiyou.wangcong@gmail.com>
--

This version is split from my earlier patch, including just the
portions that ar required for Linus' tree.

Fixes the following compile errors:

include/linux/dma-mapping.h:113: error: redefinition of 'dma_sync_single'
arch/um/include/asm/dma-mapping.h:84: error: previous definition of 'dma_sync_single' was here
include/linux/dma-mapping.h: In function 'dma_sync_single':
include/linux/dma-mapping.h:117: error: implicit declaration of function 'dma_sync_single_for_cpu'
include/linux/dma-mapping.h: At top level:
include/linux/dma-mapping.h:120: error: redefinition of 'dma_sync_sg'
arch/um/include/asm/dma-mapping.h:91: error: previous definition of 'dma_sync_sg' was here
include/linux/dma-mapping.h: In function 'dma_sync_sg':
include/linux/dma-mapping.h:124: error: implicit declaration of function 'dma_sync_sg_for_cpu'

arch/um/drivers/slirp_kern.c: In function 'slirp_init':
arch/um/drivers/slirp_kern.c:35: error: 'struct net_device' has no member named 'init'
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/drivers/slip_kern.c       | 1 -
 arch/um/drivers/slirp_kern.c      | 1 -
 arch/um/include/asm/dma-mapping.h | 4 ++--
 3 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 5ec17563142..dd2aadc14af 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -30,7 +30,6 @@ static void slip_init(struct net_device *dev, void *data)
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index f15a6e7654f..e376284f0fb 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -32,7 +32,6 @@ void slirp_init(struct net_device *dev, void *data)
 
 	slip_proto_init(&spri->slip);
 
-	dev->init = NULL;
 	dev->hard_header_len = 0;
 	dev->header_ops = NULL;
 	dev->addr_len = 0;
diff --git a/arch/um/include/asm/dma-mapping.h b/arch/um/include/asm/dma-mapping.h
index 90fc708b320..378de4bbf49 100644
--- a/arch/um/include/asm/dma-mapping.h
+++ b/arch/um/include/asm/dma-mapping.h
@@ -79,14 +79,14 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 }
 
 static inline void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
 	BUG();
 }
 
 static inline void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 	    enum dma_data_direction direction)
 {
 	BUG();
-- 
cgit v1.2.3


From 194002b274e9169a04beb1b23dcc132159bb566c Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 22 Jun 2009 16:35:24 +0200
Subject: perf_counter, x86: Add mmap counter read support

Update the mmap control page with the needed information to
use the userspace RDPMC instruction for self monitoring.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/include/asm/perf_counter.h | 2 ++
 arch/x86/include/asm/perf_counter.h     | 3 +++
 arch/x86/kernel/cpu/perf_counter.c      | 6 ++++++
 3 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
index 8ccd4e15576..0ea0639fcf7 100644
--- a/arch/powerpc/include/asm/perf_counter.h
+++ b/arch/powerpc/include/asm/perf_counter.h
@@ -61,6 +61,8 @@ struct pt_regs;
 extern unsigned long perf_misc_flags(struct pt_regs *regs);
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
 
+#define PERF_COUNTER_INDEX_OFFSET	1
+
 /*
  * Only override the default definitions in include/linux/perf_counter.h
  * if we have hardware PMU support.
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index 5fb33e160ea..fa64e401589 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -87,6 +87,9 @@ union cpuid10_edx {
 #ifdef CONFIG_PERF_COUNTERS
 extern void init_hw_perf_counters(void);
 extern void perf_counters_lapic_init(void);
+
+#define PERF_COUNTER_INDEX_OFFSET			0
+
 #else
 static inline void init_hw_perf_counters(void)		{ }
 static inline void perf_counters_lapic_init(void)	{ }
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index a310d19faca..b83474b6021 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -912,6 +912,8 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 	err = checking_wrmsrl(hwc->counter_base + idx,
 			     (u64)(-left) & x86_pmu.counter_mask);
 
+	perf_counter_update_userpage(counter);
+
 	return ret;
 }
 
@@ -1034,6 +1036,8 @@ try_generic:
 	x86_perf_counter_set_period(counter, hwc, idx);
 	x86_pmu.enable(hwc, idx);
 
+	perf_counter_update_userpage(counter);
+
 	return 0;
 }
 
@@ -1126,6 +1130,8 @@ static void x86_pmu_disable(struct perf_counter *counter)
 	x86_perf_counter_update(counter, hwc, idx);
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
+
+	perf_counter_update_userpage(counter);
 }
 
 /*
-- 
cgit v1.2.3


From 5211a242d0cbdded372aee59da18f80552b0a80a Mon Sep 17 00:00:00 2001
From: Kurt Garloff <garloff@suse.de>
Date: Wed, 24 Jun 2009 14:32:11 -0700
Subject: x86: Add sysctl to allow panic on IOCK NMI error

This patch introduces a new sysctl:

    /proc/sys/kernel/panic_on_io_nmi

which defaults to 0 (off).

When enabled, the kernel panics when the kernel receives an NMI
caused by an IO error.

The IO error triggered NMI indicates a serious system
condition, which could result in IO data corruption. Rather
than contiuing, panicing and dumping might be a better choice,
so one can figure out what's causing the IO error.

This could be especially important to companies running IO
intensive applications where corruption must be avoided, e.g. a
bank's databases.

[ SuSE has been shipping it for a while, it was done at the
  request of a large database vendor, for their users. ]

Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Roberto Angelino <robertangelino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <20090624213211.GA11291@kroah.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/dumpstack.c | 1 +
 arch/x86/kernel/traps.c     | 3 +++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 95ea5fa7d44..c8405718a4c 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -22,6 +22,7 @@
 #include "dumpstack.h"
 
 int panic_on_unrecovered_nmi;
+int panic_on_io_nmi;
 unsigned int code_bytes = 64;
 int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
 static int die_counter;
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a0f48f5671c..5204332f475 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -346,6 +346,9 @@ io_check_error(unsigned char reason, struct pt_regs *regs)
 	printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
 	show_registers(regs);
 
+	if (panic_on_io_nmi)
+		panic("NMI IOCK error: Not continuing");
+
 	/* Re-enable the IOCK line, wait for a few seconds */
 	reason = (reason & 0xf) | 8;
 	outb(reason, 0x61);
-- 
cgit v1.2.3


From 5be6066a7f8d917db347d94f1b359b9b70dcb572 Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Date: Wed, 24 Jun 2009 09:21:10 +0900
Subject: x86, mce: percpu mcheck_timer should be pinned

If CONFIG_NO_HZ + CONFIG_SMP, timer added via add_timer() might
be migrated on other cpu.  Use add_timer_on() instead.

Avoids the following failure:

Maciej Rutecki wrote:
> > After normal boot I try:
> >
> > echo 1 > /sys/devices/system/machinecheck/machinecheck0/check_interval
> >
> > I found this in dmesg:
> >
> > [  141.704025] ------------[ cut here ]------------
> > [  141.704039] WARNING: at arch/x86/kernel/cpu/mcheck/mce.c:1102
> > mcheck_timer+0xf5/0x100()

Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968b..af425b83202 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1117,7 +1117,7 @@ static void mcheck_timer(unsigned long data)
 		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
 
 	t->expires = jiffies + *n;
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 static void mce_do_trigger(struct work_struct *work)
@@ -1321,7 +1321,7 @@ static void mce_init_timer(void)
 		return;
 	setup_timer(t, mcheck_timer, smp_processor_id());
 	t->expires = round_jiffies(jiffies + *n);
-	add_timer(t);
+	add_timer_on(t, smp_processor_id());
 }
 
 /*
-- 
cgit v1.2.3


From 22f4319d6bc0155e6c0ae560729baa6c09dc09e7 Mon Sep 17 00:00:00 2001
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
Date: Thu, 25 Jun 2009 16:20:48 -0400
Subject: x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h>

CONFIG_X86_64 was misspelled (wrong case), which caused the x86-64
kernel to advertise itself as more relocatable than it really is.
This could in theory cause boot failures once bootloaders start
support the new relocation fields.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/boot.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 418e632d4a8..6f02b9a5384 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -16,7 +16,7 @@
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
 /* Minimum kernel alignment, as a power of two */
-#ifdef CONFIG_x86_64
+#ifdef CONFIG_X86_64
 #define MIN_KERNEL_ALIGN_LG2	PMD_SHIFT
 #else
 #define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT+1)
-- 
cgit v1.2.3


From 658dbfeb5e7ab35d440c665d643a6285e43fddcd Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Thu, 25 Jun 2009 15:16:06 -0700
Subject: x86, setup: correct include file in <asm/boot.h>

<asm/boot.h> needs <asm/pgtable_types.h>, not <asm/page_types.h> in
order to resolve PMD_SHIFT.  Also, correct a +1 which really should be
+ THREAD_ORDER.

This is a build error which was masked by a typoed #ifdef.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/boot.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 6f02b9a5384..7a1065958ba 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -8,7 +8,7 @@
 
 #ifdef __KERNEL__
 
-#include <asm/page_types.h>
+#include <asm/pgtable_types.h>
 
 /* Physical address where kernel should be loaded. */
 #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
@@ -19,7 +19,7 @@
 #ifdef CONFIG_X86_64
 #define MIN_KERNEL_ALIGN_LG2	PMD_SHIFT
 #else
-#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT+1)
+#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT + THREAD_ORDER)
 #endif
 #define MIN_KERNEL_ALIGN	(_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
 
-- 
cgit v1.2.3


From e888d7facd1f1460a638151036d15b6cfb3ccc74 Mon Sep 17 00:00:00 2001
From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Date: Thu, 25 Jun 2009 16:44:31 -0700
Subject: x86, delay: tsc based udelay should have rdtsc_barrier

delay_tsc needs rdtsc_barrier to provide proper delay.

Output from a test driver using hpet to cross check delay
provided by udelay().

Before:
[   86.794363] Expected delay 5us actual 4679ns
[   87.154362] Expected delay 5us actual 698ns
[   87.514162] Expected delay 5us actual 4539ns
[   88.653716] Expected delay 5us actual 4539ns
[   94.664106] Expected delay 10us actual 9638ns
[   95.049351] Expected delay 10us actual 10126ns
[   95.416110] Expected delay 10us actual 9568ns
[   95.799216] Expected delay 10us actual 9638ns
[  103.624104] Expected delay 10us actual 9707ns
[  104.020619] Expected delay 10us actual 768ns
[  104.419951] Expected delay 10us actual 9707ns

After:
[   50.983320] Expected delay 5us actual 5587ns
[   51.261807] Expected delay 5us actual 5587ns
[   51.565715] Expected delay 5us actual 5657ns
[   51.861171] Expected delay 5us actual 5587ns
[   52.164704] Expected delay 5us actual 5726ns
[   52.487457] Expected delay 5us actual 5657ns
[   52.789338] Expected delay 5us actual 5726ns
[   57.119680] Expected delay 10us actual 10755ns
[   57.893997] Expected delay 10us actual 10615ns
[   58.261287] Expected delay 10us actual 10755ns
[   58.620505] Expected delay 10us actual 10825ns
[   58.941035] Expected delay 10us actual 10755ns
[   59.320903] Expected delay 10us actual 10615ns
[   61.306311] Expected delay 10us actual 10755ns
[   61.520542] Expected delay 10us actual 10615ns

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/lib/delay.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index f4568605d7d..ff485d36118 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -55,8 +55,10 @@ static void delay_tsc(unsigned long loops)
 
 	preempt_disable();
 	cpu = smp_processor_id();
+	rdtsc_barrier();
 	rdtscl(bclock);
 	for (;;) {
+		rdtsc_barrier();
 		rdtscl(now);
 		if ((now - bclock) >= loops)
 			break;
@@ -78,6 +80,7 @@ static void delay_tsc(unsigned long loops)
 		if (unlikely(cpu != smp_processor_id())) {
 			loops -= (now - bclock);
 			cpu = smp_processor_id();
+			rdtsc_barrier();
 			rdtscl(bclock);
 		}
 	}
-- 
cgit v1.2.3


From 14a2ff6ed28931f796d2c2c8a440227a5d90f441 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 25 Jun 2009 19:00:47 -0700
Subject: sparc64: Don't use alloc_bootmem() in init_IRQ() code paths.

The page allocator and SLAB are available at this point now,
and if we still try to use bootmem allocations here the kernel
spits out warnings.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/irq_64.c | 45 +++++++++++++++++++--------------------------
 1 file changed, 19 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index bd075054942..f0ee7905540 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/bootmem.h>
 #include <linux/irq.h>
 
 #include <asm/ptrace.h>
@@ -914,25 +913,19 @@ void __cpuinit notrace sun4v_register_mondo_queues(int this_cpu)
 			   tb->nonresum_qmask);
 }
 
-static void __init alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask)
-{
-	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
-	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate mondo queue.\n");
-		prom_halt();
-	}
-
-	*pa_ptr = __pa(p);
-}
-
-static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
+/* Each queue region must be a power of 2 multiple of 64 bytes in
+ * size.  The base real address must be aligned to the size of the
+ * region.  Thus, an 8KB queue must be 8KB aligned, for example.
+ */
+static void __init alloc_one_queue(unsigned long *pa_ptr, unsigned long qmask)
 {
 	unsigned long size = PAGE_ALIGN(qmask + 1);
-	void *p = __alloc_bootmem(size, size, 0);
+	unsigned long order = get_order(size);
+	unsigned long p;
 
+	p = __get_free_pages(GFP_KERNEL, order);
 	if (!p) {
-		prom_printf("SUN4V: Error, cannot allocate kbuf page.\n");
+		prom_printf("SUN4V: Error, cannot allocate queue.\n");
 		prom_halt();
 	}
 
@@ -942,11 +935,11 @@ static void __init alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask)
 static void __init init_cpu_send_mondo_info(struct trap_per_cpu *tb)
 {
 #ifdef CONFIG_SMP
-	void *page;
+	unsigned long page;
 
 	BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
 
-	page = alloc_bootmem_pages(PAGE_SIZE);
+	page = get_zeroed_page(GFP_KERNEL);
 	if (!page) {
 		prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
 		prom_halt();
@@ -965,13 +958,13 @@ static void __init sun4v_init_mondo_queues(void)
 	for_each_possible_cpu(cpu) {
 		struct trap_per_cpu *tb = &trap_block[cpu];
 
-		alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
-		alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
-		alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask);
-		alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask);
-		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
-		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
-			       tb->nonresum_qmask);
+		alloc_one_queue(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask);
+		alloc_one_queue(&tb->dev_mondo_pa, tb->dev_mondo_qmask);
+		alloc_one_queue(&tb->resum_mondo_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->resum_kernel_buf_pa, tb->resum_qmask);
+		alloc_one_queue(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
+		alloc_one_queue(&tb->nonresum_kernel_buf_pa,
+				tb->nonresum_qmask);
 	}
 }
 
@@ -999,7 +992,7 @@ void __init init_IRQ(void)
 	kill_prom_timer();
 
 	size = sizeof(struct ino_bucket) * NUM_IVECS;
-	ivector_table = alloc_bootmem(size);
+	ivector_table = kzalloc(size, GFP_KERNEL);
 	if (!ivector_table) {
 		prom_printf("Fatal error, cannot allocate ivector_table\n");
 		prom_halt();
-- 
cgit v1.2.3


From 413ee282a510afb2f18975a189501f39d279a906 Mon Sep 17 00:00:00 2001
From: Julian Calaby <julian.calaby@gmail.com>
Date: Sun, 21 Jun 2009 16:44:13 +0000
Subject: sparc64: Fix build warnings in piggyback_64.c

This patch fixes the following build warnings:
arch/sparc/boot/piggyback_64.c: In function 'main':
arch/sparc/boot/piggyback_64.c:44: warning: 'end' may be used uninitialized in this function
arch/sparc/boot/piggyback_64.c:44: warning: 'start' may be used uninitialized in this function

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/boot/piggyback_64.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
index de364bfed0b..c63fd1b6bdd 100644
--- a/arch/sparc/boot/piggyback_64.c
+++ b/arch/sparc/boot/piggyback_64.c
@@ -46,6 +46,7 @@ int main(int argc,char **argv)
 	struct stat s;
 	int image, tail;
 	
+	start = end = 0;
 	if (stat (argv[3], &s) < 0) die (argv[3]);
 	map = fopen (argv[2], "r");
 	if (!map) die(argv[2]);
-- 
cgit v1.2.3


From 22b096a8907e5184f25fafd1b73f0b3633d52495 Mon Sep 17 00:00:00 2001
From: Robert Reif <reif@earthlink.net>
Date: Sun, 21 Jun 2009 16:45:44 +0000
Subject: sparc32: Fix obvious build issues for tftpboot.img build.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/boot/Makefile       | 2 +-
 arch/sparc/boot/piggyback_32.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 96041a8d39e..5e2caeb3110 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
 
-$(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/piggyback_32 $(obj)/System.map $(obj)/image FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index c9f500c1a8b..3f0f9335454 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -70,7 +70,7 @@ void die(char *str)
 int main(int argc,char **argv)
 {
 	static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
-	unsigned char buffer[1024], *q, *r;
+	char buffer[1024], *q, *r;
 	unsigned int i, j, k, start, end, offset;
 	FILE *map;
 	struct stat s;
-- 
cgit v1.2.3


From 52da82cfb569b44e26e15395a6727277758580fe Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 21 Jun 2009 16:46:10 +0000
Subject: sparc: fix tftpboot.img build

Kjetil Oftedal mentioned that piggyback_32 was failing
when building a sparc image.

I tracked this down to the fact that the kernel no longer
provided an absolute symbol named "end".

Commit 86ed40bd6fe511d26bb8f3fa65a84cb65c235366 ("sparc: unify sections.h")
renamed end to _end but failed to update piggyback_32.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Kjetil Oftedal <oftedal@gmail.com>
Cc: Robert Reif <reif@earthlink.net>
Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/boot/piggyback_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
index 3f0f9335454..e8dc9adfcd6 100644
--- a/arch/sparc/boot/piggyback_32.c
+++ b/arch/sparc/boot/piggyback_32.c
@@ -84,7 +84,7 @@ int main(int argc,char **argv)
 	while (fgets (buffer, 1024, map)) {
 		if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
 			start = strtoul (buffer, NULL, 16);
-		else if (!strcmp (buffer + 8, " A end\n") || !strcmp (buffer + 16, " A end\n"))
+		else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
 			end = strtoul (buffer, NULL, 16);
 	}
 	fclose (map);
-- 
cgit v1.2.3


From 3e05c5e2ce40066582dc34aa8335baa328815a09 Mon Sep 17 00:00:00 2001
From: Julian Calaby <julian.calaby@gmail.com>
Date: Sun, 21 Jun 2009 16:45:01 +0000
Subject: sparc32: Fix tftpboot.img Makefile

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/boot/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 5e2caeb3110..500a2f87f28 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -15,7 +15,7 @@ quiet_cmd_elftoaout	= ELFTOAOUT $@
 
 ifeq ($(CONFIG_SPARC32),y)
 quiet_cmd_piggy		= PIGGY   $@
-      cmd_piggy		= $(obj)/piggyback_32 $@ $(obj)/System.map $(ROOT_IMG)
+      cmd_piggy		= $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
 quiet_cmd_btfix		= BTFIX   $@
       cmd_btfix		= $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
 quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
@@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
 
-$(obj)/tftpboot.img: $(obj)/piggyback_32 $(obj)/System.map $(obj)/image FORCE
+$(obj)/tftpboot.img: $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 
-- 
cgit v1.2.3


From 8944146daa2c38dd85bc489d1b84fb9abc108837 Mon Sep 17 00:00:00 2001
From: Julian Calaby <julian.calaby@gmail.com>
Date: Tue, 23 Jun 2009 01:45:46 +0000
Subject: sparc32: Fix makefile not generating required files

The tftpboot build was failing with missing file errors.

It turns out that $(obj)/image wasn't being generated which was causing the a.out conversion to be skipped and hence piggyback to be called with nonexistent files.

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/boot/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 500a2f87f28..1ff0fd92475 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -58,7 +58,7 @@ $(obj)/image: $(obj)/btfix.o FORCE
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
 
-$(obj)/tftpboot.img: $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 
@@ -79,7 +79,7 @@ $(obj)/image: vmlinux FORCE
 	$(call if_changed,strip)
 	@echo '  kernel: $@ is ready'
 
-$(obj)/tftpboot.img: vmlinux $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
 	@echo '  kernel: $@ is ready'
-- 
cgit v1.2.3


From 6f0b1c6094b3e8eeeb13f8f16c1b2ef452a6f519 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Mon, 22 Jun 2009 23:13:48 +0000
Subject: powerpc: Swiotlb breaks pseries

Turning on SWIOTLB selects or enables PPC_NEED_DMA_SYNC_OPS, which means
we get the non empty versions of dma_sync_* in asm/dma-mapping.h

On my pseries machine the dma_ops have no such routines and we die with
a null pointer - this patch gets it booting, is there a more elegant way
to do it?

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 3d9e887c3c0..b44aaabdd1a 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -309,7 +309,9 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
 					   size, direction);
 }
 
@@ -320,7 +322,9 @@ static inline void dma_sync_single_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle,
 					      0, size, direction);
 }
 
@@ -331,7 +335,9 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_cpu)
+		dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_sg_for_device(struct device *dev,
@@ -341,7 +347,9 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+
+	if (dma_ops->sync_sg_for_device)
+		dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
 }
 
 static inline void dma_sync_single_range_for_cpu(struct device *dev,
@@ -351,7 +359,9 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+
+	if (dma_ops->sync_single_range_for_cpu)
+		dma_ops->sync_single_range_for_cpu(dev, dma_handle,
 					   offset, size, direction);
 }
 
@@ -362,7 +372,9 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
-	dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+
+	if (dma_ops->sync_single_range_for_device)
+		dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
 					      size, direction);
 }
 #else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
-- 
cgit v1.2.3


From 5a2642f620eb6e40792822fa0eafe23046fbb55e Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 22 Jun 2009 16:47:59 +0000
Subject: powerpc/mpic: Fix mapping of "DCR" based MPIC variants

Commit 31207dab7d2e63795eb15823947bd2f7025b08e2
"Fix incorrect allocation of interrupt rev-map"
introduced a regression crashing on boot on machines using
a "DCR" based MPIC, such as the Cell blades.

The reason is that the irq host data structure is initialized
much later as a result of that patch, causing our calls to
mpic_map() do be done before we have a host setup.

Unfortunately, this breaks _mpic_map_dcr() which uses the
mpic->irqhost to get to the device node.

This fixes it by, instead, passing the device node explicitely
to mpic_map().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp>
---
 arch/powerpc/sysdev/mpic.c | 29 ++++++++++++++++-------------
 1 file changed, 16 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9c3af504549..32a2e950f56 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -279,28 +279,29 @@ static void _mpic_map_mmio(struct mpic *mpic, phys_addr_t phys_addr,
 }
 
 #ifdef CONFIG_PPC_DCR
-static void _mpic_map_dcr(struct mpic *mpic, struct mpic_reg_bank *rb,
+static void _mpic_map_dcr(struct mpic *mpic, struct device_node *node,
+			  struct mpic_reg_bank *rb,
 			  unsigned int offset, unsigned int size)
 {
 	const u32 *dbasep;
 
-	dbasep = of_get_property(mpic->irqhost->of_node, "dcr-reg", NULL);
+	dbasep = of_get_property(node, "dcr-reg", NULL);
 
-	rb->dhost = dcr_map(mpic->irqhost->of_node, *dbasep + offset, size);
+	rb->dhost = dcr_map(node, *dbasep + offset, size);
 	BUG_ON(!DCR_MAP_OK(rb->dhost));
 }
 
-static inline void mpic_map(struct mpic *mpic, phys_addr_t phys_addr,
-			    struct mpic_reg_bank *rb, unsigned int offset,
-			    unsigned int size)
+static inline void mpic_map(struct mpic *mpic, struct device_node *node,
+			    phys_addr_t phys_addr, struct mpic_reg_bank *rb,
+			    unsigned int offset, unsigned int size)
 {
 	if (mpic->flags & MPIC_USES_DCR)
-		_mpic_map_dcr(mpic, rb, offset, size);
+		_mpic_map_dcr(mpic, node, rb, offset, size);
 	else
 		_mpic_map_mmio(mpic, phys_addr, rb, offset, size);
 }
 #else /* CONFIG_PPC_DCR */
-#define mpic_map(m,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
+#define mpic_map(m,n,p,b,o,s)	_mpic_map_mmio(m,p,b,o,s)
 #endif /* !CONFIG_PPC_DCR */
 
 
@@ -1152,8 +1153,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	}
 
 	/* Map the global registers */
-	mpic_map(mpic, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
-	mpic_map(mpic, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->gregs, MPIC_INFO(GREG_BASE), 0x1000);
+	mpic_map(mpic, node, paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000);
 
 	/* Reset */
 	if (flags & MPIC_WANTS_RESET) {
@@ -1194,7 +1195,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
-		mpic_map(mpic, paddr, &mpic->cpuregs[i],
+		mpic_map(mpic, node, paddr, &mpic->cpuregs[i],
 			 MPIC_INFO(CPU_BASE) + i * MPIC_INFO(CPU_STRIDE),
 			 0x1000);
 	}
@@ -1202,7 +1203,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	/* Initialize main ISU if none provided */
 	if (mpic->isu_size == 0) {
 		mpic->isu_size = mpic->num_sources;
-		mpic_map(mpic, paddr, &mpic->isus[0],
+		mpic_map(mpic, node, paddr, &mpic->isus[0],
 			 MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
 	}
 	mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
@@ -1256,8 +1257,10 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 
 	BUG_ON(isu_num >= MPIC_MAX_ISU);
 
-	mpic_map(mpic, paddr, &mpic->isus[isu_num], 0,
+	mpic_map(mpic, mpic->irqhost->of_node,
+		 paddr, &mpic->isus[isu_num], 0,
 		 MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+
 	if ((isu_first + mpic->isu_size) > mpic->num_sources)
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
-- 
cgit v1.2.3


From b810c6ec5c659c80b3641580b112db877a0f1f45 Mon Sep 17 00:00:00 2001
From: Jon Smirl <jonsmirl@gmail.com>
Date: Sun, 21 Jun 2009 15:28:00 +0000
Subject: powerpc: Have git ignore generated files from dtc compile

Have git ignore generated files from dtc compile

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/.gitignore | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2f50acd11a6..3d80c3e9cf6 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -36,3 +36,13 @@ zImage.pseries
 zconf.h
 zlib.h
 zutil.h
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_strerror.c
+fdt_sw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
+
-- 
cgit v1.2.3


From 3984114f056203d833251af85501721f7b00fd18 Mon Sep 17 00:00:00 2001
From: Sean MacLennan <smaclennan@pikatech.com>
Date: Fri, 19 Jun 2009 19:43:59 +0000
Subject: powerpc/warp: Platform fix for i2c change

A change to the i2c subsystem breaks the warp platform code. The patch
is cleaner anyway, the old way was a bit crufty.

For those with keen eyes, the gratuitous change in the string from
PIKA to Warp is just so the logs look a bit nicer. The following two
lines tend to be printed one after another.

  Warp POST OK
  Warp DTM thread running.

Yeah, this will be the third patch to warp.c submitted in this
release....

Cheers,
   Sean

The i2c_client struct changed, breaking the code that looked for the ad7414
chip. Use the new of_find_i2c_device_by_node function added in 2.6.29.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/44x/warp.c | 44 +++++++++++++--------------------------
 1 file changed, 14 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 42e09a9f77e..0362c88f47d 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/of_gpio.h>
+#include <linux/of_i2c.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -65,7 +66,6 @@ define_machine(warp) {
 
 static u32 post_info;
 
-/* I am not sure this is the best place for this... */
 static int __init warp_post_info(void)
 {
 	struct device_node *np;
@@ -194,9 +194,9 @@ static int pika_setup_leds(void)
 	return 0;
 }
 
-static void pika_setup_critical_temp(struct i2c_client *client)
+static void pika_setup_critical_temp(struct device_node *np,
+				     struct i2c_client *client)
 {
-	struct device_node *np;
 	int irq, rc;
 
 	/* Do this before enabling critical temp interrupt since we
@@ -208,14 +208,7 @@ static void pika_setup_critical_temp(struct i2c_client *client)
 	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
 	i2c_smbus_write_byte_data(client, 3,  0); /* Tlow */
 
-	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
-	if (np == NULL) {
-		printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
-		return;
-	}
-
 	irq = irq_of_parse_and_map(np, 0);
-	of_node_put(np);
 	if (irq  == NO_IRQ) {
 		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
 		return;
@@ -244,32 +237,24 @@ static inline void pika_dtm_check_fan(void __iomem *fpga)
 
 static int pika_dtm_thread(void __iomem *fpga)
 {
-	struct i2c_adapter *adap;
+	struct device_node *np;
 	struct i2c_client *client;
 
-	/* We loop in case either driver was compiled as a module and
-	 * has not been insmoded yet.
-	 */
-	while (!(adap = i2c_get_adapter(0))) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
-	}
-
-	while (1) {
-		list_for_each_entry(client, &adap->clients, list)
-			if (client->addr == 0x4a)
-				goto found_it;
+	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+	if (np == NULL)
+		return -ENOENT;
 
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ);
+	client = of_find_i2c_device_by_node(np);
+	if (client == NULL) {
+		of_node_put(np);
+		return -ENOENT;
 	}
 
-found_it:
-	pika_setup_critical_temp(client);
+	pika_setup_critical_temp(np, client);
 
-	i2c_put_adapter(adap);
+	of_node_put(np);
 
-	printk(KERN_INFO "PIKA DTM thread running.\n");
+	printk(KERN_INFO "Warp DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
 		int val;
@@ -291,7 +276,6 @@ found_it:
 	return 0;
 }
 
-
 static int __init pika_dtm_start(void)
 {
 	struct task_struct *dtm_thread;
-- 
cgit v1.2.3


From 6bb2ae535f2eee0334802724a542701bd969d055 Mon Sep 17 00:00:00 2001
From: Gerhard Pircher <gerhard_pircher@gmx.net>
Date: Fri, 19 Jun 2009 11:42:36 +0000
Subject: powerpc/amigaone: Limit ISA I/O range to 4k in the device tree

The kernel reserves the I/O address space from 0x0 to 0xfff for legacy
ISA devices. Change the ranges property for the PCI2ISA bridge to match
the kernels behavior, even if the ranges property isn't used for now.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/amigaone.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts
index 26549fca2ed..49ac36b16dd 100644
--- a/arch/powerpc/boot/dts/amigaone.dts
+++ b/arch/powerpc/boot/dts/amigaone.dts
@@ -70,8 +70,8 @@
 			devsel-speed = <0x00000001>;
 			min-grant = <0>;
 			max-latency = <0>;
-			/* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
-			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>;
+			/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
 			interrupt-parent = <&i8259>;
 			#interrupt-cells = <2>;
 			#address-cells = <2>;
-- 
cgit v1.2.3


From 7ccbe504b5ee766d33211a507189a06f3079b29b Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 18 Jun 2009 23:30:07 +0000
Subject: powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP

The old PowerSurge SMP (ie, dual or quad 604 machines) code has
numerous issues in modern world.

One is cpu_possible_map is set too late (the device-tree is bogus)
so we fail to allocate the interrupt stacks and crash. Another
problem is the fact the timebase is frozen by the bringup of the
second CPU so the delays in the generic code will hang, we need
to move some of the calling procedure to inside the powermac code.

This makes it boot again for me

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/smp.c               |   3 +-
 arch/powerpc/platforms/powermac/setup.c |  41 ++------
 arch/powerpc/platforms/powermac/smp.c   | 166 ++++++++++++++++++++------------
 3 files changed, 112 insertions(+), 98 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 65484b2200b..0b47de07302 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -68,7 +68,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
 
-static volatile unsigned int cpu_callin_map[NR_CPUS];
+/* Can't be static due to PowerMac hackery */
+volatile unsigned int cpu_callin_map[NR_CPUS];
 
 int smt_enabled_at_boot = 1;
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 86f69a4eb49..c2052265636 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -103,11 +103,6 @@ unsigned long smu_cmdbuf_abs;
 EXPORT_SYMBOL(smu_cmdbuf_abs);
 #endif
 
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
 static void pmac_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *np;
@@ -341,34 +336,6 @@ static void __init pmac_setup_arch(void)
 		ROOT_DEV = DEFAULT_ROOT_DEVICE;
 #endif
 
-#ifdef CONFIG_SMP
-	/* Check for Core99 */
-	ic = of_find_node_by_name(NULL, "uni-n");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u3");
-	if (!ic)
-		ic = of_find_node_by_name(NULL, "u4");
-	if (ic) {
-		of_node_put(ic);
-		smp_ops = &core99_smp_ops;
-	}
-#ifdef CONFIG_PPC32
-	else {
-		/*
-		 * We have to set bits in cpu_possible_map here since the
-		 * secondary CPU(s) aren't in the device tree, and
-		 * setup_per_cpu_areas only allocates per-cpu data for
-		 * CPUs in the cpu_possible_map.
-		 */
-		int cpu;
-
-		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
-			cpu_set(cpu, cpu_possible_map);
-		smp_ops = &psurge_smp_ops;
-	}
-#endif
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_ADB
 	if (strstr(cmd_line, "adb_sync")) {
 		extern int __adb_probe_sync;
@@ -512,6 +479,14 @@ static void __init pmac_init_early(void)
 #ifdef CONFIG_PPC64
 	iommu_init_early_dart();
 #endif
+
+	/* SMP Init has to be done early as we need to patch up
+	 * cpu_possible_map before interrupt stacks are allocated
+	 * or kaboom...
+	 */
+#ifdef CONFIG_SMP
+	pmac_setup_smp();
+#endif
 }
 
 static int __init pmac_declare_of_platform_devices(void)
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cf1dbe75889..6d4da7b46b4 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -64,10 +64,11 @@
 extern void __secondary_start_pmac_0(void);
 extern int pmac_pfunc_base_install(void);
 
-#ifdef CONFIG_PPC32
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
 
-/* Sync flag for HW tb sync */
-static volatile int sec_tb_reset = 0;
+#ifdef CONFIG_PPC32
 
 /*
  * Powersurge (old powermac SMP) support.
@@ -294,6 +295,9 @@ static int __init smp_psurge_probe(void)
 		psurge_quad_init();
 		/* All released cards using this HW design have 4 CPUs */
 		ncpus = 4;
+		/* No sure how timebase sync works on those, let's use SW */
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
 	} else {
 		iounmap(quad_base);
 		if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
@@ -308,18 +312,15 @@ static int __init smp_psurge_probe(void)
 	psurge_start = ioremap(PSURGE_START, 4);
 	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
 
-	/*
-	 * This is necessary because OF doesn't know about the
+	/* This is necessary because OF doesn't know about the
 	 * secondary cpu(s), and thus there aren't nodes in the
 	 * device tree for them, and smp_setup_cpu_maps hasn't
-	 * set their bits in cpu_possible_map and cpu_present_map.
+	 * set their bits in cpu_present_map.
 	 */
 	if (ncpus > NR_CPUS)
 		ncpus = NR_CPUS;
-	for (i = 1; i < ncpus ; ++i) {
+	for (i = 1; i < ncpus ; ++i)
 		cpu_set(i, cpu_present_map);
-		set_hard_smp_processor_id(i, i);
-	}
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 
@@ -329,8 +330,14 @@ static int __init smp_psurge_probe(void)
 static void __init smp_psurge_kick_cpu(int nr)
 {
 	unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
-	unsigned long a;
-	int i;
+	unsigned long a, flags;
+	int i, j;
+
+	/* Defining this here is evil ... but I prefer hiding that
+	 * crap to avoid giving people ideas that they can do the
+	 * same.
+	 */
+	extern volatile unsigned int cpu_callin_map[NR_CPUS];
 
 	/* may need to flush here if secondary bats aren't setup */
 	for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
@@ -339,47 +346,52 @@ static void __init smp_psurge_kick_cpu(int nr)
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
 
+	/* This is going to freeze the timeebase, we disable interrupts */
+	local_irq_save(flags);
+
 	out_be32(psurge_start, start);
 	mb();
 
 	psurge_set_ipi(nr);
+
 	/*
 	 * We can't use udelay here because the timebase is now frozen.
 	 */
 	for (i = 0; i < 2000; ++i)
-		barrier();
+		asm volatile("nop" : : : "memory");
 	psurge_clr_ipi(nr);
 
-	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
-}
-
-/*
- * With the dual-cpu powersurge board, the decrementers and timebases
- * of both cpus are frozen after the secondary cpu is started up,
- * until we give the secondary cpu another interrupt.  This routine
- * uses this to get the timebases synchronized.
- *  -- paulus.
- */
-static void __init psurge_dual_sync_tb(int cpu_nr)
-{
-	int t;
-
-	set_dec(tb_ticks_per_jiffy);
-	/* XXX fixme */
-	set_tb(0, 0);
-
-	if (cpu_nr > 0) {
+	/*
+	 * Also, because the timebase is frozen, we must not return to the
+	 * caller which will try to do udelay's etc... Instead, we wait -here-
+	 * for the CPU to callin.
+	 */
+	for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+		for (j = 1; j < 10000; j++)
+			asm volatile("nop" : : : "memory");
+		asm volatile("sync" : : : "memory");
+	}
+	if (!cpu_callin_map[nr])
+		goto stuck;
+
+	/* And we do the TB sync here too for standard dual CPU cards */
+	if (psurge_type == PSURGE_DUAL) {
+		while(!tb_req)
+			barrier();
+		tb_req = 0;
+		mb();
+		timebase = get_tb();
+		mb();
+		while (timebase)
+			barrier();
 		mb();
-		sec_tb_reset = 1;
-		return;
 	}
+ stuck:
+	/* now interrupt the secondary, restarting both TBs */
+	if (psurge_type == PSURGE_DUAL)
+		psurge_set_ipi(1);
 
-	/* wait for the secondary to have reset its TB before proceeding */
-	for (t = 10000000; t > 0 && !sec_tb_reset; --t)
-		;
-
-	/* now interrupt the secondary, starting both TBs */
-	psurge_set_ipi(1);
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
 }
 
 static struct irqaction psurge_irqaction = {
@@ -390,36 +402,35 @@ static struct irqaction psurge_irqaction = {
 
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
+	if (cpu_nr != 0)
+		return;
 
-	if (cpu_nr == 0) {
-		/* If we failed to start the second CPU, we should still
-		 * send it an IPI to start the timebase & DEC or we might
-		 * have them stuck.
-		 */
-		if (num_online_cpus() < 2) {
-			if (psurge_type == PSURGE_DUAL)
-				psurge_set_ipi(1);
-			return;
-		}
-		/* reset the entry point so if we get another intr we won't
-		 * try to startup again */
-		out_be32(psurge_start, 0x100);
-		if (setup_irq(30, &psurge_irqaction))
-			printk(KERN_ERR "Couldn't get primary IPI interrupt");
-	}
-
-	if (psurge_type == PSURGE_DUAL)
-		psurge_dual_sync_tb(cpu_nr);
+	/* reset the entry point so if we get another intr we won't
+	 * try to startup again */
+	out_be32(psurge_start, 0x100);
+	if (setup_irq(30, &psurge_irqaction))
+		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
 void __init smp_psurge_take_timebase(void)
 {
-	/* Dummy implementation */
+	if (psurge_type != PSURGE_DUAL)
+		return;
+
+	tb_req = 1;
+	mb();
+	while (!timebase)
+		barrier();
+	mb();
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	mb();
+	set_dec(tb_ticks_per_jiffy/2);
 }
 
 void __init smp_psurge_give_timebase(void)
 {
-	/* Dummy implementation */
+	/* Nothing to do here */
 }
 
 /* PowerSurge-style Macs */
@@ -437,9 +448,6 @@ struct smp_ops_t psurge_smp_ops = {
  * Core 99 and later support
  */
 
-static void (*pmac_tb_freeze)(int freeze);
-static u64 timebase;
-static int tb_req;
 
 static void smp_core99_give_timebase(void)
 {
@@ -478,7 +486,6 @@ static void __devinit smp_core99_take_timebase(void)
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
 	mb();
-	set_dec(tb_ticks_per_jiffy/2);
 
 	local_irq_restore(flags);
 }
@@ -920,3 +927,34 @@ struct smp_ops_t core99_smp_ops = {
 # endif
 #endif
 };
+
+void __init pmac_setup_smp(void)
+{
+	struct device_node *np;
+
+	/* Check for Core99 */
+	np = of_find_node_by_name(NULL, "uni-n");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u3");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u4");
+	if (np) {
+		of_node_put(np);
+		smp_ops = &core99_smp_ops;
+	}
+#ifdef CONFIG_PPC32
+	else {
+		/* We have to set bits in cpu_possible_map here since the
+		 * secondary CPU(s) aren't in the device tree. Various
+		 * things won't be initialized for CPUs not in the possible
+		 * map, so we really need to fix it up here.
+		 */
+		int cpu;
+
+		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+			cpu_set(cpu, cpu_possible_map);
+		smp_ops = &psurge_smp_ops;
+	}
+#endif /* CONFIG_PPC32 */
+}
+
-- 
cgit v1.2.3


From a2367194183d6ab6b05e5d7d9b40db6ba48afc06 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 18 Jun 2009 22:29:55 +0000
Subject: powerpc: Fix output from show_regs

For some reason we've had an explicit KERN_INFO for GPR dumps.  With
recent changes we get output like:

<6>GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff

The KERN_INFO is causing the <6>.  Don't see any reason to keep it
around.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3e7135bbe40..892a9f2e6d7 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -528,7 +528,7 @@ void show_regs(struct pt_regs * regs)
 
 	for (i = 0;  i < 32;  i++) {
 		if ((i % REGS_PER_LINE) == 0)
-			printk("\n" KERN_INFO "GPR%02d: ", i);
+			printk("\nGPR%02d: ", i);
 		printk(REG " ", regs->gpr[i]);
 		if (i == LAST_VOLATILE && !FULL_REGS(regs))
 			break;
-- 
cgit v1.2.3


From 85355bb272db31a3f2dd99d547eef794805e1319 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 18 Jun 2009 22:01:20 +0000
Subject: powerpc: Fix mpic alloc warning

Since we can use kmalloc earlier we are getting the following since the
mpic_alloc() code calls alloc_bootmem().  Move to using kzalloc() to
remove the warning.

------------[ cut here ]------------
Badness at c0583248 [verbose debug info unavailable]
NIP: c0583248 LR: c0583210 CTR: 00000004
REGS: c0741de0 TRAP: 0700   Not tainted  (2.6.30-06736-g12a31df)
MSR: 00021000 <ME,CE>  CR: 22024024  XER: 00000000
TASK = c070d3b8[0] 'swapper' THREAD: c0740000 CPU: 0
<6>GPR00: 00000001 c0741e90 c070d3b8 00000001 00000210 00000020 3fffffff 00000000
<6>GPR08: 00000000 c0c85700 c04f8c40 0000002d 22044022 1004a388 7ffd9400 00000000
<6>GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c04f8c40 00000000 c059f62c c075a0c0
<6>GPR24: c059f648 00000000 0000000f 00000210 00000020 00000000 3fffffff 00000210
NIP [c0583248] alloc_arch_preferred_bootmem+0x50/0x80
LR [c0583210] alloc_arch_preferred_bootmem+0x18/0x80
Call Trace:
[c0741e90] [c07343b0] devtree_lock+0x0/0x24 (unreliable)
[c0741ea0] [c0583b14] ___alloc_bootmem_nopanic+0x54/0x108
[c0741ee0] [c0583e18] ___alloc_bootmem+0x18/0x50
[c0741ef0] [c057b9cc] mpic_alloc+0x48/0x710
[c0741f40] [c057ecf4] mpc85xx_ds_pic_init+0x190/0x1b8
[c0741f90] [c057633c] init_IRQ+0x24/0x34
[c0741fa0] [c05738b8] start_kernel+0x260/0x3dc
[c0741ff0] [c00003c8] skpinv+0x2e0/0x31c
Instruction dump:
409e001c 7c030378 80010014 83e1000c 38210010 7c0803a6 4e800020 3d20c0c8
39295700 80090004 7c000034 5400d97e <0f000000> 2f800000 409e001c 38800000

BenH: Changed to use GFP_KERNEL, the allocator will do the right thing

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mpic.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 32a2e950f56..d46de1f0f3e 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1053,11 +1053,10 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	int		intvec_top;
 	u64		paddr = phys_addr;
 
-	mpic = alloc_bootmem(sizeof(struct mpic));
+	mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
 	if (mpic == NULL)
 		return NULL;
-	
-	memset(mpic, 0, sizeof(struct mpic));
+
 	mpic->name = name;
 
 	mpic->hc_irq = mpic_irq_chip;
-- 
cgit v1.2.3


From 850f6ac316cf84bba63fdb775c897834eccbfaa3 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 18 Jun 2009 19:25:00 +0000
Subject: powerpc/mm: Make k(un)map_atomic out of line

Those functions are way too big to be inline, besides, kmap_atomic()
wants to call debug_kmap_atomic() which isn't exported for modules
and causes module link failures.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/highmem.h | 57 ++--------------------------
 arch/powerpc/mm/Makefile           |  1 +
 arch/powerpc/mm/highmem.c          | 77 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+), 53 deletions(-)
 create mode 100644 arch/powerpc/mm/highmem.c

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 684a73f4324..a74c4ee6c02 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -22,9 +22,7 @@
 
 #ifdef __KERNEL__
 
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/highmem.h>
 #include <asm/kmap_types.h>
 #include <asm/tlbflush.h>
 #include <asm/page.h>
@@ -62,6 +60,9 @@ extern pte_t *pkmap_page_table;
 
 extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
+extern void *kmap_atomic_prot(struct page *page, enum km_type type,
+			      pgprot_t prot);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
 
 static inline void *kmap(struct page *page)
 {
@@ -79,62 +80,11 @@ static inline void kunmap(struct page *page)
 	kunmap_high(page);
 }
 
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-{
-	unsigned int idx;
-	unsigned long vaddr;
-
-	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	debug_kmap_atomic(type);
-	idx = type + KM_TYPE_NR*smp_processor_id();
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#ifdef CONFIG_DEBUG_HIGHMEM
-	BUG_ON(!pte_none(*(kmap_pte-idx)));
-#endif
-	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
-	local_flush_tlb_page(NULL, vaddr);
-
-	return (void*) vaddr;
-}
-
 static inline void *kmap_atomic(struct page *page, enum km_type type)
 {
 	return kmap_atomic_prot(page, type, kmap_prot);
 }
 
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
-#ifdef CONFIG_DEBUG_HIGHMEM
-	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
-
-	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
-		pagefault_enable();
-		return;
-	}
-
-	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
-	/*
-	 * force other mappings to Oops if they'll try to access
-	 * this pte without first remap it
-	 */
-	pte_clear(&init_mm, vaddr, kmap_pte-idx);
-	local_flush_tlb_page(NULL, vaddr);
-#endif
-	pagefault_enable();
-}
-
 static inline struct page *kmap_atomic_to_page(void *ptr)
 {
 	unsigned long idx, vaddr = (unsigned long) ptr;
@@ -148,6 +98,7 @@ static inline struct page *kmap_atomic_to_page(void *ptr)
 	return pte_page(*pte);
 }
 
+
 #define flush_cache_kmaps()	flush_cache_all()
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 2d2192e48de..3e68363405b 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_PPC_MM_SLICES)	+= slice.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_PPC_SUBPAGE_PROT)	+= subpage-prot.o
 obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
+obj-$(CONFIG_HIGHMEM)		+= highmem.o
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
new file mode 100644
index 00000000000..c2186c74c85
--- /dev/null
+++ b/arch/powerpc/mm/highmem.c
@@ -0,0 +1,77 @@
+/*
+ * highmem.c: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ *
+ * Reworked for PowerPC by various contributors. Moved from
+ * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	debug_kmap_atomic(type);
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+	__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
+	local_flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+		pagefault_enable();
+		return;
+	}
+
+	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte-idx);
+	local_flush_tlb_page(NULL, vaddr);
+#endif
+	pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
-- 
cgit v1.2.3


From 4a5cbf17c49a6024a6d7baf03efdffb8ed252bb1 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 18 Jun 2009 19:17:39 +0000
Subject: powerpc: Map more memory early on 601 processors

The 32-bit kernel relies on some memory being mapped covering
the kernel text,data and bss at least, early during boot before
the full MMU setup is done. On 32-bit "classic" processors, this
is done using BAT registers.

On 601, the size of BATs is limited to 8M and we use 2 of them
for that initial mapping. This can become quite tight when enabling
features like lockdep, so let's use a 3rd one to bump that mapping
from 16M to 24M. We keep the 4th BAT free as it can be useful for
debugging early boot code to map things like serial ports.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/head_32.S | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 48469463f89..fc213294275 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -1124,9 +1124,8 @@ mmu_off:
 	RFI
 
 /*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to PAGE_OFFSET.  From this point on we can't safely
- * call OF any more.
+ * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
+ * (we keep one for debugging) and on others, we use one 256M BAT.
  */
 initial_bats:
 	lis	r11,PAGE_OFFSET@h
@@ -1136,12 +1135,16 @@ initial_bats:
 	bne	4f
 	ori	r11,r11,4		/* set up BAT registers for 601 */
 	li	r8,0x7f			/* valid, block length = 8MB */
-	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
-	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
 	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
 	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
-	mtspr	SPRN_IBAT1U,r9
-	mtspr	SPRN_IBAT1L,r10
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT1U,r11
+	mtspr	SPRN_IBAT1L,r8
+	addis	r11,r11,0x800000@h
+	addis	r8,r8,0x800000@h
+	mtspr	SPRN_IBAT2U,r11
+	mtspr	SPRN_IBAT2L,r8
 	isync
 	blr
 
-- 
cgit v1.2.3


From 5d38902c483881645ba16058cffaa478b81e5cfa Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 17 Jun 2009 17:43:59 +0000
Subject: powerpc: Add irqtrace support for 32-bit powerpc

Based on initial work from: Dale Farnsworth <dale@farnsworth.org>

Add the low level irq tracing hooks for 32-bit powerpc needed
to enable full lockdep functionality.

The approach taken to deal with the code in entry_32.S is that
we don't trace all the transitions of MSR:EE when we just turn
it off to peek at TI_FLAGS without races. Only when we are
calling into C code or returning from exceptions with a state
that have changed from what lockdep thinks.

There's a little bugger though: If we take an exception that
keeps interrupts enabled (such as an alignment exception) while
interrupts are enabled, we will call trace_hardirqs_on() on the
way back spurriously. Not a big deal, but to get rid of it would
require remembering in pt_regs that the exception was one of the
type that kept interrupts enabled which we don't know at this
stage. (Well, we could test all cases for regs->trap but that
sucks too much).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/Kconfig              |   1 -
 arch/powerpc/include/asm/hw_irq.h |  20 +++---
 arch/powerpc/kernel/entry_32.S    | 127 ++++++++++++++++++++++++++++++++++++--
 arch/powerpc/kernel/setup_32.c    |   2 +
 4 files changed, 135 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedfa05d..d00131ca083 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -62,7 +62,6 @@ config HAVE_LATENCYTOP_SUPPORT
 
 config TRACE_IRQFLAGS_SUPPORT
 	bool
-	depends on PPC64
 	default y
 
 config LOCKDEP_SUPPORT
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 867ab8ed69b..8b505eaaa38 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -68,13 +68,13 @@ static inline int irqs_disabled_flags(unsigned long flags)
 
 #if defined(CONFIG_BOOKE)
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#define raw_local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
 #else
 #define SET_MSR_EE(x)	mtmsr(x)
-#define local_irq_restore(flags)	mtmsr(flags)
+#define raw_local_irq_restore(flags)	mtmsr(flags)
 #endif
 
-static inline void local_irq_disable(void)
+static inline void raw_local_irq_disable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 0": : :"memory");
@@ -86,7 +86,7 @@ static inline void local_irq_disable(void)
 #endif
 }
 
-static inline void local_irq_enable(void)
+static inline void raw_local_irq_enable(void)
 {
 #ifdef CONFIG_BOOKE
 	__asm__ __volatile__("wrteei 1": : :"memory");
@@ -98,7 +98,7 @@ static inline void local_irq_enable(void)
 #endif
 }
 
-static inline void local_irq_save_ptr(unsigned long *flags)
+static inline void raw_local_irq_save_ptr(unsigned long *flags)
 {
 	unsigned long msr;
 	msr = mfmsr();
@@ -110,12 +110,12 @@ static inline void local_irq_save_ptr(unsigned long *flags)
 #endif
 }
 
-#define local_save_flags(flags)	((flags) = mfmsr())
-#define local_irq_save(flags)	local_irq_save_ptr(&flags)
-#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_local_save_flags(flags)	((flags) = mfmsr())
+#define raw_local_irq_save(flags)	raw_local_irq_save_ptr(&flags)
+#define raw_irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+#define raw_irqs_disabled_flags(flags)	(((flags) & MSR_EE) == 0)
 
-#define hard_irq_enable()	local_irq_enable()
-#define hard_irq_disable()	local_irq_disable()
+#define hard_irq_disable()		raw_local_irq_disable()
 
 static inline int irqs_disabled_flags(unsigned long flags)
 {
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f12915..3cadba60a4b 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@ transfer_to_handler_cont:
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	lis	r12,reenable_mmu@h
+	ori	r12,r12,reenable_mmu@l
+	mtspr	SPRN_SRR0,r12
+	mtspr	SPRN_SRR1,r10
+	SYNC
+	RFI
+reenable_mmu:				/* re-enable mmu so we can */
+	mfmsr	r10
+	lwz	r12,_MSR(r1)
+	xor	r10,r10,r12
+	andi.	r10,r10,MSR_EE		/* Did EE change? */
+	beq	1f
+
+	/* Save handler and return address into the 2 unused words
+	 * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+	 * else can be recovered from the pt_regs except r3 which for
+	 * normal interrupts has been set to pt_regs and for syscalls
+	 * is an argument, so we temporarily use ORIG_GPR3 to save it
+	 */
+	stw	r9,8(r1)
+	stw	r11,12(r1)
+	stw	r3,ORIG_GPR3(r1)
+	bl	trace_hardirqs_off
+	lwz	r0,GPR0(r1)
+	lwz	r3,ORIG_GPR3(r1)
+	lwz	r4,GPR4(r1)
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	lwz	r9,8(r1)
+	lwz	r11,12(r1)
+1:	mtctr	r11
+	mtlr	r9
+	bctr				/* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
 	mtlr	r9
 	SYNC
 	RFI				/* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
 
 #if defined (CONFIG_6xx) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
 #ifdef SHOW_SYSCALLS
 	bl	do_show_syscall
 #endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Return from syscalls can (and generally will) hard enable
+	 * interrupts. You aren't supposed to call a syscall with
+	 * interrupts disabled in the first place. However, to ensure
+	 * that we get it right vs. lockdep if it happens, we force
+	 * that hard enable here with appropriate tracing if we see
+	 * that we have been called with interrupts off
+	 */
+	mfmsr	r11
+	andi.	r12,r11,MSR_EE
+	bne+	1f
+	/* We came in with interrupts disabled, we enable them now */
+	bl	trace_hardirqs_on
+	mfmsr	r11
+	lwz	r0,GPR0(r1)
+	lwz	r3,GPR3(r1)
+	lwz	r4,GPR4(r1)
+	ori	r11,r11,MSR_EE
+	lwz	r5,GPR5(r1)
+	lwz	r6,GPR6(r1)
+	lwz	r7,GPR7(r1)
+	lwz	r8,GPR8(r1)
+	mtmsr	r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	lwz	r11,TI_FLAGS(r10)
 	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@ ret_from_syscall:
 	rlwinm	r12,r1,0,0,(31-THREAD_SHIFT)	/* current_thread_info() */
 	/* disable interrupts so current_thread_info()->flags can't change */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
+	/* Note: We don't bother telling lockdep about it */
 	SYNC
 	MTMSRD(r10)
 	lwz	r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@ ret_from_syscall:
 	oris	r11,r11,0x1000	/* Set SO bit in CR */
 	stw	r11,_CCR(r1)
 syscall_exit_cont:
+	lwz	r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* If we are going to return from the syscall with interrupts
+	 * off, we trace that here. It shouldn't happen though but we
+	 * want to catch the bugger if it does right ?
+	 */
+	andi.	r10,r8,MSR_EE
+	bne+	1f
+	stw	r3,GPR3(r1)
+	bl      trace_hardirqs_off
+	lwz	r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 	/* If the process has its own DBCR0 value, load it up.  The internal
 	   debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	mtlr	r4
 	mtcr	r5
 	lwz	r7,_NIP(r1)
-	lwz	r8,_MSR(r1)
 	FIX_SRR1(r8, r0)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
@@ -394,7 +470,9 @@ syscall_exit_work:
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
 	beq	ret_from_except
 
-	/* Re-enable interrupts */
+	/* Re-enable interrupts. There is no need to trace that with
+	 * lockdep as we are supposed to have IRQs on at this point
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)
@@ -705,6 +783,7 @@ ret_from_except:
 	/* Hard-disable interrupts so that current_thread_info()->flags
 	 * can't change between when we test it and when we return
 	 * from the interrupt. */
+	/* Note: We don't bother telling lockdep about it */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC			/* Some chip revs have problems here... */
 	MTMSRD(r10)		/* disable interrupts */
@@ -744,11 +823,24 @@ resume_kernel:
 	beq+	restore
 	andi.	r0,r3,MSR_EE	/* interrupts off? */
 	beq	restore		/* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep thinks irqs are enabled, we need to call
+	 * preempt_schedule_irq with IRQs off, so we inform lockdep
+	 * now that we -did- turn them off already
+	 */
+	bl	trace_hardirqs_off
+#endif
 1:	bl	preempt_schedule_irq
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r3,TI_FLAGS(r9)
 	andi.	r0,r3,_TIF_NEED_RESCHED
 	bne-	1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* And now, to properly rebalance the above, we tell lockdep they
+	 * are being turned back on, which will happen when we return
+	 */
+	bl	trace_hardirqs_on
+#endif
 #else
 resume_kernel:
 #endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@ restore:
 	stw	r6,icache_44x_need_flush@l(r4)
 1:
 #endif  /* CONFIG_44x */
+
+	lwz	r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/* Lockdep doesn't know about the fact that IRQs are temporarily turned
+	 * off in this assembly code while peeking at TI_FLAGS() and such. However
+	 * we need to inform it if the exception turned interrupts off, and we
+	 * are about to trun them back on.
+	 *
+	 * The problem here sadly is that we don't know whether the exceptions was
+	 * one that turned interrupts off or not. So we always tell lockdep about
+	 * turning them on here when we go back to wherever we came from with EE
+	 * on, even if that may meen some redudant calls being tracked. Maybe later
+	 * we could encode what the exception did somewhere or test the exception
+	 * type in the pt_regs but that sounds overkill
+	 */
+	andi.	r10,r9,MSR_EE
+	beq	1f
+	bl	trace_hardirqs_on
+	lwz	r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
 
 #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	lwz	r9,_MSR(r1)
 	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
 	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
 
@@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	MTMSRD(r10)		/* clear the RI bit */
 	.globl exc_exit_restart
 exc_exit_restart:
-	lwz	r9,_MSR(r1)
 	lwz	r12,_NIP(r1)
 	FIX_SRR1(r9,r10)
 	mtspr	SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@ do_work:			/* r10 contains MSR_KERNEL here */
 	beq	do_user_signal
 
 do_resched:			/* r10 contains MSR_KERNEL here */
+	/* Note: We don't need to inform lockdep that we are enabling
+	 * interrupts here. As far as it knows, they are already enabled
+	 */
 	ori	r10,r10,MSR_EE
 	SYNC
 	MTMSRD(r10)		/* hard-enable interrupts */
 	bl	schedule
 recheck:
+	/* Note: And we don't tell it we are disabling them again
+	 * neither. Those disable/enable cycles used to peek at
+	 * TI_FLAGS aren't advertised.
+	 */
 	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
 	SYNC
 	MTMSRD(r10)		/* disable interrupts */
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 1d154248cf4..e1e3059cf34 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -119,6 +119,8 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
  */
 notrace void __init machine_init(unsigned long dt_ptr)
 {
+	lockdep_init();
+
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
-- 
cgit v1.2.3


From f97bb36f705da0a86b3ea77bfeee3415fee0b025 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 16 Jun 2009 16:42:49 +0000
Subject: powerpc/rtas: Turn rtas lock into a raw spinlock

RTAS currently uses a normal spinlock. However it can be called from
contexts where this is not necessarily a good idea. For example, it
can be called while syncing timebases, with the core timebase being
frozen. Unfortunately, that will deadlock in case of lock contention
when spinlock debugging is enabled as the spin lock debugging code
will try to use __delay() which ... relies on the timebase being
enabled.

Also RTAS can be used in some low level IRQ handling code path so it
may as well be a raw spinlock for -rt sake.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/rtas.h |  2 +-
 arch/powerpc/kernel/rtas.c      | 38 +++++++++++++++++++++++++++++---------
 2 files changed, 30 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 01c12339b30..0af42d20b69 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -58,7 +58,7 @@ struct rtas_t {
 	unsigned long entry;		/* physical address pointer */
 	unsigned long base;		/* physical address pointer */
 	unsigned long size;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	struct rtas_args args;
 	struct device_node *dev;	/* virtual address pointer */
 };
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index ee4c7609b64..d9a9974c693 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -40,7 +40,7 @@
 #include <asm/atomic.h>
 
 struct rtas_t rtas = {
-	.lock = SPIN_LOCK_UNLOCKED
+	.lock = __RAW_SPIN_LOCK_UNLOCKED
 };
 EXPORT_SYMBOL(rtas);
 
@@ -67,6 +67,28 @@ unsigned long rtas_rmo_buf;
 void (*rtas_flash_term_hook)(int);
 EXPORT_SYMBOL(rtas_flash_term_hook);
 
+/* RTAS use home made raw locking instead of spin_lock_irqsave
+ * because those can be called from within really nasty contexts
+ * such as having the timebase stopped which would lockup with
+ * normal locks and spinlock debugging enabled
+ */
+static unsigned long lock_rtas(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	preempt_disable();
+	__raw_spin_lock_flags(&rtas.lock, flags);
+	return flags;
+}
+
+static void unlock_rtas(unsigned long flags)
+{
+	__raw_spin_unlock(&rtas.lock);
+	local_irq_restore(flags);
+	preempt_enable();
+}
+
 /*
  * call_rtas_display_status and call_rtas_display_status_delay
  * are designed only for very early low-level debugging, which
@@ -79,7 +101,7 @@ static void call_rtas_display_status(char c)
 
 	if (!rtas.base)
 		return;
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 
 	args->token = 10;
 	args->nargs = 1;
@@ -89,7 +111,7 @@ static void call_rtas_display_status(char c)
 
 	enter_rtas(__pa(args));
 
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 }
 
 static void call_rtas_display_status_delay(char c)
@@ -411,8 +433,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 	if (!rtas.entry || token == RTAS_UNKNOWN_SERVICE)
 		return -1;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_lock_irqsave(&rtas.lock, s);
+	s = lock_rtas();
 	rtas_args = &rtas.args;
 
 	rtas_args->token = token;
@@ -439,8 +460,7 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 			outputs[i] = rtas_args->rets[i+1];
 	ret = (nret > 0)? rtas_args->rets[0]: 0;
 
-	/* Gotta do something different here, use global lock for now... */
-	spin_unlock_irqrestore(&rtas.lock, s);
+	unlock_rtas(s);
 
 	if (buff_copy) {
 		log_error(buff_copy, ERR_TYPE_RTAS_LOG, 0);
@@ -837,7 +857,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 
 	buff_copy = get_errorlog_buffer();
 
-	spin_lock_irqsave(&rtas.lock, flags);
+	flags = lock_rtas();
 
 	rtas.args = args;
 	enter_rtas(__pa(&rtas.args));
@@ -848,7 +868,7 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	if (args.rets[0] == -1)
 		errbuf = __fetch_rtas_last_error(buff_copy);
 
-	spin_unlock_irqrestore(&rtas.lock, flags);
+	unlock_rtas(flags);
 
 	if (buff_copy) {
 		if (errbuf)
-- 
cgit v1.2.3


From c4007a2fbf5f82b7e694c22b5929c87e38415a56 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 16 Jun 2009 16:42:50 +0000
Subject: powerpc: Use one common impl. of RTAS timebase sync and use raw
 spinlock

Several platforms use their own copy of what is essentially the same code,
using RTAS to synchronize the timebases when bringing up new CPUs. This
moves it all into a single common implementation and additionally
turns the spinlock into a raw spinlock since the former can rely on
the timebase not being frozen when spinlock debugging is enabled, and finally
masks interrupts while the timebase is disabled.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/rtas.h      |  3 +++
 arch/powerpc/kernel/rtas.c           | 31 +++++++++++++++++++++++++++++++
 arch/powerpc/platforms/cell/smp.c    | 30 ++----------------------------
 arch/powerpc/platforms/chrp/smp.c    | 33 ++-------------------------------
 arch/powerpc/platforms/pseries/smp.c | 30 ++----------------------------
 5 files changed, 40 insertions(+), 87 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 0af42d20b69..168fce72620 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -245,5 +245,8 @@ static inline u32 rtas_config_addr(int busno, int devfn, int reg)
 			(devfn << 8) | (reg & 0xff);
 }
 
+extern void __cpuinit rtas_give_timebase(void);
+extern void __cpuinit rtas_take_timebase(void);
+
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index d9a9974c693..c434823b8c8 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -38,6 +38,7 @@
 #include <asm/syscalls.h>
 #include <asm/smp.h>
 #include <asm/atomic.h>
+#include <asm/time.h>
 
 struct rtas_t rtas = {
 	.lock = __RAW_SPIN_LOCK_UNLOCKED
@@ -971,3 +972,33 @@ int __init early_init_dt_scan_rtas(unsigned long node,
 	/* break now */
 	return 1;
 }
+
+static raw_spinlock_t timebase_lock;
+static u64 timebase = 0;
+
+void __cpuinit rtas_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
+	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
+	timebase = get_tb();
+	__raw_spin_unlock(&timebase_lock);
+
+	while (timebase)
+		barrier();
+	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
+	local_irq_restore(flags);
+}
+
+void __cpuinit rtas_take_timebase(void)
+{
+	while (!timebase)
+		barrier();
+	__raw_spin_lock(&timebase_lock);
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	__raw_spin_unlock(&timebase_lock);
+}
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 9046803c827..bc97fada48c 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -36,7 +36,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -140,31 +139,6 @@ static void __devinit smp_cell_setup_cpu(int cpu)
 	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit cell_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit cell_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_cell_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -224,8 +198,8 @@ void __init smp_init_cell(void)
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = cell_give_timebase;
-		smp_ops->take_timebase = cell_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	DBG(" <- smp_init_cell()\n");
diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c
index 10a4a4d063b..02cafecc90e 100644
--- a/arch/powerpc/platforms/chrp/smp.c
+++ b/arch/powerpc/platforms/chrp/smp.c
@@ -26,7 +26,6 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/smp.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>
@@ -42,40 +41,12 @@ static void __devinit smp_chrp_setup_cpu(int cpu_nr)
 	mpic_setup_this_cpu();
 }
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit smp_chrp_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-void __devinit smp_chrp_take_timebase(void)
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-	printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
 /* CHRP with openpic */
 struct smp_ops_t chrp_smp_ops = {
 	.message_pass = smp_mpic_message_pass,
 	.probe = smp_mpic_probe,
 	.kick_cpu = smp_chrp_kick_cpu,
 	.setup_cpu = smp_chrp_setup_cpu,
-	.give_timebase = smp_chrp_give_timebase,
-	.take_timebase = smp_chrp_take_timebase,
+	.give_timebase = rtas_give_timebase,
+	.take_timebase = rtas_take_timebase,
 };
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1a231c389ba..1f8f6cfb94f 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -35,7 +35,6 @@
 #include <asm/prom.h>
 #include <asm/smp.h>
 #include <asm/paca.h>
-#include <asm/time.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/firmware.h>
@@ -118,31 +117,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 }
 #endif /* CONFIG_XICS */
 
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase = 0;
-
-static void __devinit pSeries_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	rtas_call(rtas_token("freeze-time-base"), 0, 1, NULL);
-	timebase = get_tb();
-	spin_unlock(&timebase_lock);
-
-	while (timebase)
-		barrier();
-	rtas_call(rtas_token("thaw-time-base"), 0, 1, NULL);
-}
-
-static void __devinit pSeries_take_timebase(void)
-{
-	while (!timebase)
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase >> 32, timebase & 0xffffffff);
-	timebase = 0;
-	spin_unlock(&timebase_lock);
-}
-
 static void __devinit smp_pSeries_kick_cpu(int nr)
 {
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
@@ -209,8 +183,8 @@ static void __init smp_init_pseries(void)
 
 	/* Non-lpar has additional take/give timebase */
 	if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
-		smp_ops->give_timebase = pSeries_give_timebase;
-		smp_ops->take_timebase = pSeries_take_timebase;
+		smp_ops->give_timebase = rtas_give_timebase;
+		smp_ops->take_timebase = rtas_take_timebase;
 	}
 
 	pr_debug(" <- smp_init_pSeries()\n");
-- 
cgit v1.2.3


From 6893ce6c1cdcf489b7ca8e6b6596208aa971a083 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 16 Jun 2009 16:42:51 +0000
Subject: powerpc/pasemi: Use raw spinlock in SMP TB sync

spin_lock() can hang if called while the timebase is frozen,
so use a raw lock instead, also disable interrupts while
at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pasemi/setup.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 153051eb6d9..a4619347aa7 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -71,20 +71,25 @@ static void pas_restart(char *cmd)
 }
 
 #ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
+static raw_spinlock_t timebase_lock;
 static unsigned long timebase;
 
 static void __devinit pas_give_timebase(void)
 {
-	spin_lock(&timebase_lock);
+	unsigned long flags;
+
+	local_irq_save(flags);
+	hard_irq_disable();
+	__raw_spin_lock(&timebase_lock);
 	mtspr(SPRN_TBCTL, TBCTL_FREEZE);
 	isync();
 	timebase = get_tb();
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 
 	while (timebase)
 		barrier();
 	mtspr(SPRN_TBCTL, TBCTL_RESTART);
+	local_irq_restore(flags);
 }
 
 static void __devinit pas_take_timebase(void)
@@ -92,10 +97,10 @@ static void __devinit pas_take_timebase(void)
 	while (!timebase)
 		smp_rmb();
 
-	spin_lock(&timebase_lock);
+	__raw_spin_lock(&timebase_lock);
 	set_tb(timebase >> 32, timebase & 0xffffffff);
 	timebase = 0;
-	spin_unlock(&timebase_lock);
+	__raw_spin_unlock(&timebase_lock);
 }
 
 struct smp_ops_t pas_smp_ops = {
-- 
cgit v1.2.3


From 03c01aa740d4137ea2884328f2c29956c6084834 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 16 Jun 2009 15:55:18 +0000
Subject: powerpc/of: Fix usage of dev_set_name() in of_device_alloc()

dev_set_name() takes a format string, so use it properly and avoid
a warning with recent gcc's

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/of_device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index fa983a59c4c..a359cb08e90 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -76,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np,
 	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
-		dev_set_name(&dev->dev, bus_id);
+		dev_set_name(&dev->dev, "%s", bus_id);
 	else
 		of_device_make_bus_id(dev);
 
-- 
cgit v1.2.3


From f694cda89250f38782a5fd0b2d32fe33a39dcf37 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 16 Jun 2009 15:55:19 +0000
Subject: powerpc/440: Fix warning early debug code

The function udbg_44x_as1_flush() has the wrong prototype causing
a warning when enabling 440 early debug.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/udbg_16550.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index 0362a891e54..acb74a17bbb 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -219,7 +219,7 @@ void udbg_init_pas_realmode(void)
 #ifdef CONFIG_PPC_EARLY_DEBUG_44x
 #include <platforms/44x/44x.h>
 
-static int udbg_44x_as1_flush(void)
+static void udbg_44x_as1_flush(void)
 {
 	if (udbg_comport) {
 		while ((as1_readb(&udbg_comport->lsr) & LSR_THRE) == 0)
-- 
cgit v1.2.3


From 6c16a74d423f584ed80815ee7b944f5b578dd37a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 15 Jun 2009 16:53:43 +0000
Subject: powerpc/mm: Fix potential access to freed pages when using hugetlbfs

When using 64k page sizes, our PTE pages are split in two halves,
the second half containing the "extension" used to keep track of
individual 4k pages when not using HW 64k pages.

However, our page tables used for hugetlb have a slightly different
format and don't carry that "second half".

Our code that batched PTEs to be invalidated unconditionally reads
the "second half" (to put it into the batch), which means that when
called to invalidate hugetlb PTEs, it will access unrelated memory.

It breaks when CONFIG_DEBUG_PAGEALLOC is enabled.

This fixes it by only accessing the second half when the _PAGE_COMBO
bit is set in the first half, which indicates that we are dealing with
a "combo" page which represents 16x4k subpages. Anything else shouldn't
have this bit set and thus not require loading from the second half.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pte-hash64-64k.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
index e05d26fa372..82b72207c51 100644
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ b/arch/powerpc/include/asm/pte-hash64-64k.h
@@ -47,7 +47,8 @@
  * generic accessors and iterators here
  */
 #define __real_pte(e,p) 	((real_pte_t) { \
-	(e), pte_val(*((p) + PTRS_PER_PTE)) })
+			(e), ((e) & _PAGE_COMBO) ? \
+				(pte_val(*((p) + PTRS_PER_PTE))) : 0 })
 #define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
         (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
 #define __rpte_to_pte(r)	((r).pte)
-- 
cgit v1.2.3


From a80cad950f2a562e60db1869dd29bc007c5a4b66 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 26 Jun 2009 07:05:39 +0000
Subject: sh: ms7724se: Add sh_eth support

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c   | 106 +++++++++++++++++++++++++++++++++-
 arch/sh/include/mach-se/mach/se7724.h |   5 ++
 2 files changed, 109 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd558b..21d18005fb4 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,6 +23,8 @@
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
@@ -272,6 +274,34 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
+	&sh_eth_device,
 };
 
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!ctrl_inw(EEPROM_STAT))
+			return 1;
+		cpu_relax();
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac[3];
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		ctrl_outw(0x0, EEPROM_OP); /* read */
+		ctrl_outw(i*2, EEPROM_ADR);
+		ctrl_outw(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac[i] = ctrl_inw(EEPROM_DATA);
+		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+	}
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+	ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
@@ -302,7 +381,8 @@ static int __init devices_setup(void)
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
-		    (1 << 12)), /* USB0 */
+		    (1 << 12) | /* USB0 */
+		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
 	/* enable IRQ 0,1,2 */
@@ -404,6 +484,28 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
 	if (sw & SW41_B) {
 		/* SVGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 800;
@@ -437,7 +539,7 @@ static int __init devices_setup(void)
 	}
 
 	return platform_add_devices(ms7724se_devices,
-				ARRAY_SIZE(ms7724se_devices));
+				    ARRAY_SIZE(ms7724se_devices));
 }
 device_initcall(devices_setup);
 
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b60d0d..29514a39d0f 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
  */
 #include <asm/addrspace.h>
 
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+
 #define PA_LED		(0xba203000)	/* 8bit LED */
 #define IRQ_MODE	(0xba200010)
 #define IRQ0_SR		(0xba200014)
-- 
cgit v1.2.3


From 2495fbf7effa6868f5d74124ae9b22a57980755b Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 26 Jun 2009 10:53:57 -0700
Subject: x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables

There were a set of pre-Kconfig configuration variables defined in the
video code.  There is absolutely no evidence that they have been
tweaked by anybody in modern history, so just get rid of them and hope
nobody notices.  If someone does complain, these should be made real
Kconfig variables.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/video-vesa.c |  7 +------
 arch/x86/boot/video-vga.c  | 10 ----------
 arch/x86/boot/video.c      |  5 -----
 arch/x86/boot/video.h      | 20 ++------------------
 4 files changed, 3 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147d6ff..d7ef26ba454 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -31,7 +31,6 @@ static inline void vesa_store_mode_params_graphics(void) {}
 
 static int vesa_probe(void)
 {
-#if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
 	struct biosregs ireg, oreg;
 	u16 mode;
 	addr_t mode_ptr;
@@ -49,8 +48,7 @@ static int vesa_probe(void)
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
-#endif /* CONFIG_VIDEO_VESA || CONFIG_FIRMWARE_EDID */
-#ifdef CONFIG_VIDEO_VESA
+
 	set_fs(vginfo.video_mode_ptr.seg);
 	mode_ptr = vginfo.video_mode_ptr.off;
 
@@ -102,9 +100,6 @@ static int vesa_probe(void)
 	}
 
 	return nmodes;
-#else
-	return 0;
-#endif /* CONFIG_VIDEO_VESA */
 }
 
 static int vesa_set_mode(struct mode_info *mode)
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 8f8d827e254..819caa1f200 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -47,14 +47,6 @@ static u8 vga_set_basic_mode(void)
 
 	initregs(&ireg);
 
-#ifdef CONFIG_VIDEO_400_HACK
-	if (adapter >= ADAPTER_VGA) {
-		ireg.ax = 0x1202;
-		ireg.bx = 0x0030;
-		intcall(0x10, &ireg, NULL);
-	}
-#endif
-
 	ax = 0x0f00;
 	intcall(0x10, &ireg, &oreg);
 	mode = oreg.al;
@@ -62,11 +54,9 @@ static u8 vga_set_basic_mode(void)
 	set_fs(0);
 	rows = rdfs8(0x484);	/* rows minus one */
 
-#ifndef CONFIG_VIDEO_400_HACK
 	if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
 	    (rows == 0 || rows == 24))
 		return mode;
-#endif
 
 	if (mode != 3 && mode != 7)
 		mode = 3;
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index bad728b76fc..d42da380249 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -221,7 +221,6 @@ static unsigned int mode_menu(void)
 	}
 }
 
-#ifdef CONFIG_VIDEO_RETAIN
 /* Save screen content to the heap */
 static struct saved_screen {
 	int x, y;
@@ -299,10 +298,6 @@ static void restore_screen(void)
 	ireg.dl = saved.curx;
 	intcall(0x10, &ireg, NULL);
 }
-#else
-#define save_screen()		((void)0)
-#define restore_screen()	((void)0)
-#endif
 
 void set_video(void)
 {
diff --git a/arch/x86/boot/video.h b/arch/x86/boot/video.h
index 5bb174a997f..ff339c5db31 100644
--- a/arch/x86/boot/video.h
+++ b/arch/x86/boot/video.h
@@ -17,19 +17,8 @@
 
 #include <linux/types.h>
 
-/* Enable autodetection of SVGA adapters and modes. */
-#undef CONFIG_VIDEO_SVGA
-
-/* Enable autodetection of VESA modes */
-#define CONFIG_VIDEO_VESA
-
-/* Retain screen contents when switching modes */
-#define CONFIG_VIDEO_RETAIN
-
-/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
-#undef CONFIG_VIDEO_400_HACK
-
-/* This code uses an extended set of video mode numbers. These include:
+/*
+ * This code uses an extended set of video mode numbers. These include:
  * Aliases for standard modes
  *      NORMAL_VGA (-1)
  *      EXTENDED_VGA (-2)
@@ -67,13 +56,8 @@
 /* The "recalculate timings" flag */
 #define VIDEO_RECALC 0x8000
 
-/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
-#ifdef CONFIG_VIDEO_RETAIN
 void store_screen(void);
 #define DO_STORE() store_screen()
-#else
-#define DO_STORE() ((void)0)
-#endif /* CONFIG_VIDEO_RETAIN */
 
 /*
  * Mode table structures
-- 
cgit v1.2.3


From 39a449d96ac3db9b6d498b6ffbf4c763746d5e8b Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Tue, 23 Jun 2009 18:53:15 -0400
Subject: asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in
 vmlinux.lds.h

We recently added a INIT_TASK(align) in include/asm-generic/vmlinux.lds.h,
but there is already a macro INIT_TASK in include/linux/init_task.h, which
is quite confusing.  We should switch the macro in the linker script to
INIT_TASK_DATA. (Sorry that I missed this in reviewing the patch).  Since
the macros are new, there is only one user of the INIT_TASK in
vmlinux.lds.h, arch/mn10300/kernel/vmlinux.lds.S.

However, we are currently using INIT_TASK_DATA for laying down an entire
.data.init_task section.  So rename that to INIT_TASK_DATA_SECTION.

I would be worried about changing the meaning of INIT_TASK_DATA, but the
old INIT_TASK_DATA implementation had no users, and in fact if anyone had
tried to use it, it would have failed to compile because it didn't pass
the alignment to the old INIT_TASK.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jesper Nilsson <Jesper.Nilsson@axis.com
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/mn10300/kernel/vmlinux.lds.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index bcebcefb4ad..c96ba3da95a 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -61,7 +61,7 @@ SECTIONS
 	_edata = .;		/* End of data section */
   }
 
-  .data.init_task : { INIT_TASK(THREAD_SIZE); }
+  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
-- 
cgit v1.2.3


From 702b59e623c3ca80beaeab79ca5ede4ea23170e2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:36:36 +0100
Subject: [ARM] 5573/1: ep93xx: ensure typesafe io

ARM: ep93xx: ensure typesafe io

For the ep93xx platform, all EP93XX_*_BASE defines are based
on virtual addresses.  Ensure that all these defines are
properly typesafe for the __raw_{read/write}* macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 61 +++++++++++++------------
 arch/arm/mach-ep93xx/include/mach/io.h          | 17 ++++++-
 2 files changed, 47 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079180d..49b256b3ddf 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
 
 /* AHB peripherals */
-#define EP93XX_DMA_BASE			((void __iomem *)		\
-					 (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
 #define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
-#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
 
-#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
 
-#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
 
-#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
 
-#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
 
-#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
 
-#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
 
 
 /* APB peripherals */
-#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 #define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
 #define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
 #define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
 #define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
 #define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
 
-#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
-#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
 
-#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
 #define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
 #define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,32 @@
 #define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 
-#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
-#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
-#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
 #define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
 #define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
 #define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
-#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
-#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
-#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
 #define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
@@ -179,7 +182,7 @@
 #define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
-#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
 
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081cc8b..cebcc1c53d6 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(p)		__typesafe_io(p)
-#define __mem_pci(p)	(p)
+#define __io(p)			__typesafe_io(p)
+#define __mem_pci(p)		(p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p)		p
+#else
+#define IOMEM(p)		((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
-- 
cgit v1.2.3


From ddf4f3d994651ee2924432a618d9caefed411dc1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:39:27 +0100
Subject: [ARM] 5574/1: ep93xx: gpio.c: fix header includes and __iomem
 pointers

Fix ep93xx gpio.c header includes and __iomem pointers.

  1. <linux/gpio.h> should be included instead of <asm/gpio.h>
  2. <mach/hardware.h> should be included instead of <mach/ep93xx-regs.h>
  3. data_reg and data_dir_reg in struct ep93xx_gpio_chip should be
     void __iomem pointers not unsigned int

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d2fbc..7b7a564916f 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,15 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
 
 struct ep93xx_gpio_chip {
 	struct gpio_chip	chip;
 
-	unsigned int		data_reg;
-	unsigned int		data_dir_reg;
+	void __iomem		*data_reg;
+	void __iomem		*data_dir_reg;
 };
 
 #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-- 
cgit v1.2.3


From f04989bbf4a40077dc7ddcc3dccde11a5f3e91f2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:40:34 +0100
Subject: [ARM] 5575/1: ep93xx: Show gpio interrupt type in debugfs output.

ep93xx: Show gpio interrupt type in debugfs output.

EP93xx uses a private implementation for the debugfs output.
Modify this output so it includes the interrupt type when the
gpio is configured as an interrupt

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 56 +++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 7b7a564916f..2d83d69e2ee 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -111,15 +111,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
 	u8 data_reg, data_dir_reg;
-	int i;
+	int gpio, i;
 
 	data_reg = __raw_readb(ep93xx_chip->data_reg);
 	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
 
-	for (i = 0; i < chip->ngpio; i++)
-		seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
-			   (data_reg & (1 << i)) ? "set" : "clear",
-			   (data_dir_reg & (1 << i)) ? "out" : "in");
+	gpio = ep93xx_chip->chip.base;
+	for (i = 0; i < chip->ngpio; i++, gpio++) {
+		int is_out = data_dir_reg & (1 << i);
+
+		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+				chip->label, i, gpio,
+				gpiochip_is_requested(chip, i) ? : "",
+				is_out ? "out" : "in ",
+				(data_reg & (1 << i)) ? "hi" : "lo");
+
+		if (!is_out) {
+			int irq = gpio_to_irq(gpio);
+			struct irq_desc *desc = irq_desc + irq;
+
+			if (irq >= 0 && desc->action) {
+				char *trigger;
+
+				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+				case IRQ_TYPE_NONE:
+					trigger = "(default)";
+					break;
+				case IRQ_TYPE_EDGE_FALLING:
+					trigger = "edge-falling";
+					break;
+				case IRQ_TYPE_EDGE_RISING:
+					trigger = "edge-rising";
+					break;
+				case IRQ_TYPE_EDGE_BOTH:
+					trigger = "edge-both";
+					break;
+				case IRQ_TYPE_LEVEL_HIGH:
+					trigger = "level-high";
+					break;
+				case IRQ_TYPE_LEVEL_LOW:
+					trigger = "level-low";
+					break;
+				default:
+					trigger = "?trigger?";
+					break;
+				}
+
+				seq_printf(s, " irq-%d %s%s",
+						irq, trigger,
+						(desc->status & IRQ_WAKEUP)
+							? " wakeup" : "");
+			}
+		}
+
+		seq_printf(s, "\n");
+	}
 }
 
 #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
-- 
cgit v1.2.3


From 9a24ee03aebc55cec00cc388b6727bff24ed433f Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 24 Jun 2009 17:13:48 +0100
Subject: [ARM] 5563/1: at91: at91sam9rlek lcd interface correction

Here is a little update to the at91sam9rlek lcd interface.
This will correct the power pin of the LCD.
It will also add precision to the struct atmel_lcdfb_info
scructure: backlight enabling  and wiring mode correction:
RGB wiring on the -EK board.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9rlek.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..f6b5672cabd 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
 static void at91_lcdc_power_control(int on)
 {
 	if (on)
-		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
 	else
-		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
 	.default_monspecs		= &at91fb_default_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
 	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
 };
 
 #else
-- 
cgit v1.2.3


From 226ddb9833a3c2f1087bfac70659d8e318d3c31f Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 24 Jun 2009 17:13:47 +0100
Subject: [ARM] 5564/1: at91: add gpio button and leds support for at91sam9rlek

This adds input keyboard gpio support on at91sam9rlek board. It adds button 1
and 2 (left and right click).
It also adds gpio leds ds1, ds2 and ds3.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9rlek.c | 79 +++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..9120d5d3a6f 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -15,6 +15,8 @@
 #include <linux/spi/spi.h>
 #include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -206,6 +208,79 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 #endif
 
 
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PD15,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "bottom" led, green, userled2 to be defined */
+		.name			= "ds2",
+		.gpio			= AT91_PIN_PD16,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds3",
+		.gpio			= AT91_PIN_PD14,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PB0,
+		.code		= BTN_2,
+		.desc		= "Right Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB1,
+		.code		= BTN_1,
+		.desc		= "Left Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* btn1 */
+	at91_set_deglitch(AT91_PIN_PB1, 1);
+	at91_set_gpio_input(AT91_PIN_PB0, 1);	/* btn2 */
+	at91_set_deglitch(AT91_PIN_PB0, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -224,6 +299,10 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 }
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-- 
cgit v1.2.3


From 7c6425a0404399ba78852ef4108007ecf51ef3dc Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 24 Jun 2009 23:15:23 +0100
Subject: [ARM] 5566/1: Remove at91_gpiolib_request

Remove at91_gpiolib_request. It returns -EPERM if a request pin is not
in GPIO mode, however we want to be able to gpio_request alternative
function pins to reserve them, and in some cases we need to be able to
use the gpiolib functions on alternative function pins.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/gpio.c | 15 ---------------
 1 file changed, 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f2236f0e101..ae4772e744a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,13 +44,11 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
 					 unsigned offset, int val);
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset);
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
 
 #define AT91_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.request	  = at91_gpiolib_request,	\
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
@@ -588,19 +586,6 @@ static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
 	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
 }
 
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned pin = chip->base + offset;
-	void __iomem *pio = pin_to_controller(pin);
-	unsigned mask = pin_to_mask(pin);
-
-	/* Cannot request GPIOs that are in alternate function mode */
-	if (!(__raw_readl(pio + PIO_PSR) & mask))
-		return -EPERM;
-
-	return 0;
-}
-
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	int i;
-- 
cgit v1.2.3


From 2ef9df7ada6b6dd53446a994ef6e3a6ad5a300ef Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:57 +0100
Subject: [ARM] 5569/1: at91: Support for at91sam9g45: clocks management

Add the at91sam9g45 series support to the AT91 generic clock file.
This takes care of the particularities of the PMC for this series.
It also takes advantage of the management by functionalities of
those PLLs and clocks.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 62 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 52 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index bac578fe0d3..6396680271e 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,20 +47,25 @@
  * Chips have some kind of clocks : group them by functionality
  */
 #define cpu_has_utmi()		(  cpu_is_at91cap9() \
-				|| cpu_is_at91sam9rl())
+				|| cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+#define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+#define cpu_has_300M_plla()	(0)
 
-#define cpu_has_upll()		(0)
+#define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
+
+#define cpu_has_upll()		(cpu_is_at91sam9g45())
 
 /* USB host HS & FS */
 #define cpu_has_uhp()		(!cpu_is_at91sam9rl())
 
 /* USB device FS only */
-#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
-
+#define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
@@ -133,6 +138,13 @@ static void pmc_uckr_mode(struct clk *clk, int is_on)
 {
 	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
 
+	if (cpu_is_at91sam9g45()) {
+		if (is_on)
+			uckr |= AT91_PMC_BIASEN;
+		else
+			uckr &= ~AT91_PMC_BIASEN;
+	}
+
 	if (is_on) {
 		is_on = AT91_PMC_LOCKU;
 		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -310,6 +322,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	unsigned long	flags;
 	unsigned	prescale;
 	unsigned long	actual;
+	unsigned long	prev = ULONG_MAX;
 
 	if (!clk_is_programmable(clk))
 		return -EINVAL;
@@ -317,8 +330,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 
 	actual = clk->parent->rate_hz;
 	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual && actual <= rate)
+		if (actual > rate)
+			prev = actual;
+
+		if (actual && actual <= rate) {
+			if ((prev - rate) < (rate - actual)) {
+				actual = prev;
+				prescale--;
+			}
 			break;
+		}
 		actual >>= 1;
 	}
 
@@ -373,6 +394,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return -EBUSY;
 	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
 		return -EINVAL;
+
+	if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
+		return -EINVAL;
+
 	spin_lock_irqsave(&clk_lock, flags);
 
 	clk->rate_hz = parent->rate_hz;
@@ -637,6 +662,7 @@ int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
 	int i;
+	int pll_overclock = false;
 
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
@@ -654,12 +680,25 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
-	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
+	if (cpu_has_300M_plla()) {
+		if (plla.rate_hz > 300000000)
+			pll_overclock = true;
+	} else if (cpu_has_800M_plla()) {
+		if (plla.rate_hz > 800000000)
+			pll_overclock = true;
+	} else {
+		if (plla.rate_hz > 209000000)
+			pll_overclock = true;
+	}
+	if (pll_overclock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
+	if (cpu_is_at91sam9g45()) {
+		mckr = at91_sys_read(AT91_PMC_MCKR);
+		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
+	}
 
-	if (cpu_has_upll() && !cpu_has_pllb()) {
+	if (!cpu_has_pllb() && cpu_has_upll()) {
 		/* setup UTMI clock as the fourth primary clock
 		 * (instead of pllb) */
 		utmi_clk.type |= CLK_TYPE_PRIMARY;
@@ -701,6 +740,9 @@ int __init at91_clock_init(unsigned long main_clock)
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
+	} else if (cpu_is_at91sam9g45()) {
+		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
 	}
-- 
cgit v1.2.3


From fddcc0ae58edefeb7ac1e460411d7dfbe8ebdacc Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:56 +0100
Subject: [ARM] 5571/1: at91: Basic support for at91sam9g45 series: header
 files.

AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embedds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

Here is the basic header file support for this product series.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h      | 138 +++++++++++++++++++
 .../mach-at91/include/mach/at91sam9g45_matrix.h    | 153 +++++++++++++++++++++
 arch/arm/mach-at91/include/mach/cpu.h              |  16 +++
 arch/arm/mach-at91/include/mach/hardware.h         |   2 +
 arch/arm/mach-at91/include/mach/timex.h            |   5 +
 5 files changed, 314 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 00000000000..2c42cf5f0c5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,138 @@
+/*
+ * Chip-specific header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
+#define AT91SAM9G45_ID_US0	7	/* USART 0 */
+#define AT91SAM9G45_ID_US1	8	/* USART 1 */
+#define AT91SAM9G45_ID_US2	9	/* USART 2 */
+#define AT91SAM9G45_ID_US3	10	/* USART 3 */
+#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS		0xfff78000
+#define AT91SAM9G45_BASE_TCB0		0xfff7c000
+#define AT91SAM9G45_BASE_TC0		0xfff7c000
+#define AT91SAM9G45_BASE_TC1		0xfff7c040
+#define AT91SAM9G45_BASE_TC2		0xfff7c080
+#define AT91SAM9G45_BASE_MCI0		0xfff80000
+#define AT91SAM9G45_BASE_TWI0		0xfff84000
+#define AT91SAM9G45_BASE_TWI1		0xfff88000
+#define AT91SAM9G45_BASE_US0		0xfff8c000
+#define AT91SAM9G45_BASE_US1		0xfff90000
+#define AT91SAM9G45_BASE_US2		0xfff94000
+#define AT91SAM9G45_BASE_US3		0xfff98000
+#define AT91SAM9G45_BASE_SSC0		0xfff9c000
+#define AT91SAM9G45_BASE_SSC1		0xfffa0000
+#define AT91SAM9G45_BASE_SPI0		0xfffa4000
+#define AT91SAM9G45_BASE_SPI1		0xfffa8000
+#define AT91SAM9G45_BASE_AC97C		0xfffac000
+#define AT91SAM9G45_BASE_TSC		0xfffb0000
+#define AT91SAM9G45_BASE_ISI		0xfffb4000
+#define AT91SAM9G45_BASE_PWMC		0xfffb8000
+#define AT91SAM9G45_BASE_EMAC		0xfffbc000
+#define AT91SAM9G45_BASE_AES		0xfffc0000
+#define AT91SAM9G45_BASE_TDES		0xfffc4000
+#define AT91SAM9G45_BASE_SHA		0xfffc8000
+#define AT91SAM9G45_BASE_TRNG		0xfffcc000
+#define AT91SAM9G45_BASE_MCI1		0xfffd0000
+#define AT91SAM9G45_BASE_TCB1		0xfffd4000
+#define AT91SAM9G45_BASE_TC3		0xfffd4000
+#define AT91SAM9G45_BASE_TC4		0xfffd4040
+#define AT91SAM9G45_BASE_TC5		0xfffd4080
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9G45_BASE_US0
+#define AT91_USART1	AT91SAM9G45_BASE_US1
+#define AT91_USART2	AT91SAM9G45_BASE_US2
+#define AT91_USART3	AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define AT91SAM9G45_OHCI_BASE	0x00700000	/* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#define CONSISTENT_DMA_SIZE	SZ_4M
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 00000000000..c972d60e0ae
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define			AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
+#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
+#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
+
+#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
+#define			AT91C_VDEC_SEL_OFF		(0 << 0)
+#define			AT91C_VDEC_SEL_ON		(1 << 0)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c554c3e4d55..b73e7bf097d 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -23,6 +23,7 @@
 #define ARCH_ID_AT91SAM9263	0x019607a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -39,6 +40,15 @@ static inline unsigned long at91_cpu_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
 
+#define ARCH_EXID_AT91SAM9M11	0x00000001
+#define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G45	0x00000004
+
+static inline unsigned long at91_exid_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_EXID);
+}
+
 
 #define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
@@ -99,6 +109,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9rl()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G45
+#define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#else
+#define cpu_is_at91sam9g45()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index da0b681c652..f0869170fa0 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #include <mach/at91sam9263.h>
 #elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9g45.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index d84c9948bec..38f6c4250c7 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -62,6 +62,11 @@
 #define AT91SAM9_MASTER_CLOCK	132096000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+
+#define AT91SAM9_MASTER_CLOCK	133333333
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91CAP9)
 
 #define AT91CAP9_MASTER_CLOCK	100000000
-- 
cgit v1.2.3


From 789b23bc40a67d9a19bedc2655c6bcab79bcabd8 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:58 +0100
Subject: [ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board
 support

Here are the at91 specific files dedicated to the at91sam9g45 series. They
mimic the traditional at91 way of managing chips & boards.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In
the future, the main board for this 9g45 series will be the
AT91SAM9M10G45-EK (I choose this last name for the board file).

Simple drivers are enabled in _devices and board- files. Newer peripheral
support will be added in future patches.

Incuded peripherals support (for now):
- USART
- SPI
- Ethernet
- NAND flash
- LCD
- gpio/joystick/buttons
- leds and pwm

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig               |   26 +-
 arch/arm/mach-at91/Makefile              |    4 +
 arch/arm/mach-at91/Makefile.boot         |    4 +
 arch/arm/mach-at91/at91sam9g45.c         |  360 +++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c | 1230 ++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9m10g45ek.c  |  389 ++++++++++
 arch/arm/mach-at91/generic.h             |    2 +
 arch/arm/mach-at91/include/mach/board.h  |    8 +-
 8 files changed, 2020 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-at91/at91sam9g45.c
 create mode 100644 arch/arm/mach-at91/at91sam9g45_devices.c
 create mode 100644 arch/arm/mach-at91/board-sam9m10g45ek.c

(limited to 'arch')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 323b47f2b52..22309ba97fa 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -41,6 +41,12 @@ config ARCH_AT91SAM9G20
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
@@ -280,6 +286,22 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9G45EKES
+	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+	depends on ARCH_AT91SAM9G45
+	help
+	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+	  "ES" at the end of the name means that this board is an
+	  Engineering Sample.
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91CAP9
 
 comment "AT91CAP9 Board Type"
@@ -321,7 +343,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -383,7 +405,7 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
 
 config AT91_EARLY_USART4
 	bool "USART4"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c69ff237fd1..2975f9ab861 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_d
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
+ obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
@@ -55,6 +56,9 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 
+# AT91SAM9G45 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 071a2506a69..3462b815054 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -7,6 +7,10 @@ ifeq ($(CONFIG_ARCH_AT91CAP9),y)
    zreladdr-y	:= 0x70008000
 params_phys-y	:= 0x70000100
 initrd_phys-y	:= 0x70410000
+else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+   zreladdr-y	:= 0x70008000
+params_phys-y	:= 0x70000100
+initrd_phys-y	:= 0x70410000
 else
    zreladdr-y	:= 0x20008000
 params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
new file mode 100644
index 00000000000..85166b7e69a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -0,0 +1,360 @@
+/*
+ *  Chip-specific setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9g45_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
+		.length		= AT91SAM9G45_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioDE_clk = {
+	.name		= "pioDE_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIODE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PWMC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+	.name		= "tsc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_DMA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+	.name		= "uhphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UHPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+	.name		= "ac97_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_AC97C,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+/* One additional fake clock for ohci */
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &uhphs_clk,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc0_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&tcb_clk,
+	&pwm_clk,
+	&tsc_clk,
+	&dma_clk,
+	&uhphs_clk,
+	&lcdc_clk,
+	&ac97_clk,
+	&macb_clk,
+	&isi_clk,
+	&udphs_clk,
+	&mmc1_clk,
+	// irq0
+	&ohci_clk,
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9g45_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9g45_gpio[] = {
+	{
+		.id		= AT91SAM9G45_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioDE_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioDE_clk,
+	}
+};
+
+static void at91sam9g45_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+static void at91sam9g45_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9G45 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+
+	at91_arch_reset = at91sam9g45_reset;
+	pm_power_off = at91sam9g45_poweroff;
+	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9g45_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9g45_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A */
+	1,	/* Parallel IO Controller B */
+	1,	/* Parallel IO Controller C */
+	1,	/* Parallel IO Controller D and E */
+	0,
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	5,	/* USART 3 */
+	0,	/* Multimedia Card Interface 0 */
+	6,	/* Two-Wire Interface 0 */
+	6,	/* Two-Wire Interface 1 */
+	5,	/* Serial Peripheral Interface 0 */
+	5,	/* Serial Peripheral Interface 1 */
+	4,	/* Serial Synchronous Controller 0 */
+	4,	/* Serial Synchronous Controller 1 */
+	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+	0,	/* Pulse Width Modulation Controller */
+	0,	/* Touch Screen Controller */
+	0,	/* DMA Controller */
+	2,	/* USB Host High Speed port */
+	3,	/* LDC Controller */
+	5,	/* AC97 Controller */
+	3,	/* Ethernet */
+	0,	/* Image Sensor Interface */
+	2,	/* USB Device High speed port */
+	0,
+	0,	/* Multimedia Card Interface 1 */
+	0,
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+};
+
+void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9g45_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
new file mode 100644
index 00000000000..d746e8621bc
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -0,0 +1,1230 @@
+/*
+ *  On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/fb.h>
+#include <video/atmel_lcdc.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ *  USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ohci_data;
+
+static struct resource usbh_ohci_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_OHCI_BASE,
+		.end	= AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_UHPHS,
+		.end	= AT91SAM9G45_ID_UHPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_ohci_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_ohci_data,
+	},
+	.resource	= usbh_ohci_resources,
+	.num_resources	= ARRAY_SIZE(usbh_ohci_resources),
+};
+
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_ohci_data = *data;
+	platform_device_register(&at91_usbh_ohci_device);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_UDPHS_FIFO,
+		.end	= AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_BASE_UDPHS,
+		.end	= AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_UDPHS,
+		.end	= AT91SAM9G45_ID_UDPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+	EP("ep0", 0, 64, 1, 0, 0),
+	EP("ep1", 1, 1024, 2, 1, 1),
+	EP("ep2", 2, 1024, 2, 1, 1),
+	EP("ep3", 3, 1024, 3, 1, 0),
+	EP("ep4", 4, 1024, 3, 1, 0),
+	EP("ep5", 5, 1024, 3, 1, 1),
+	EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+	struct usba_platform_data pdata;
+	struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+	.name		= "atmel_usba_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &usba_udc_data.pdata,
+	},
+	.resource	= usba_udc_resources,
+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+	usba_udc_data.pdata.vbus_pin = -EINVAL;
+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+	if (data && data->vbus_pin > 0) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	/* Clocks */
+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+	platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_EMAC,
+		.end	= AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_EMAC,
+		.end	= AT91SAM9G45_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9g45_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	[0] = {
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC,
+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_nand_device = {
+	.name		= "atmel_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9g45_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+	.sda_pin		= AT91_PIN_PA20,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA21,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev.platform_data	= &pdata_i2c0,
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+	.sda_pin		= AT91_PIN_PB10,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB11,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &pdata_i2c1,
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	if (i2c_id == 0) {
+		at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+static struct resource twi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI0,
+		.end	= AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI0,
+		.end	= AT91SAM9G45_ID_TWI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name		= "at91_i2c",
+	.id		= 0,
+	.resource	= twi0_resources,
+	.num_resources	= ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI1,
+		.end	= AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI1,
+		.end	= AT91SAM9G45_ID_TWI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name		= "at91_i2c",
+	.id		= 1,
+	.resource	= twi1_resources,
+	.num_resources	= ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	/* pins used for TWI interface */
+	if (i2c_id == 0) {
+		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+#else
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI0,
+		.end	= AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI0,
+		.end	= AT91SAM9G45_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI1,
+		.end	= AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI1,
+		.end	= AT91SAM9G45_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_LCDC_BASE,
+		.end	= AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_LCDC,
+		.end	= AT91SAM9G45_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "atmel_lcdfb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
+
+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
+	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
+	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+static struct resource tcb0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB0,
+		.end	= AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb0_resources,
+	.num_resources	= ARRAY_SIZE(tcb0_resources),
+};
+
+/* TCB1 begins with TC3 */
+static struct resource tcb1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB1,
+		.end	= AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= tcb1_resources,
+	.num_resources	= ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has one clock and irq for all six TC channels */
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb0_device);
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9g45_rtc_device = {
+	.name		= "at91_rtc",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+	platform_device_register(&at91sam9g45_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+	{
+		.start	= AT91_BASE_SYS + AT91_RTT,
+		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_rtt_device = {
+	.name		= "at91_rtt",
+	.id		= 0,
+	.resource	= rtt_resources,
+	.num_resources	= ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+	platform_device_register(&at91sam9g45_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9g45_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at91sam9g45_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_PWMC,
+		.end	= AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_PWMC,
+		.end	= AT91SAM9G45_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PD24, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PD31, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PD26, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PD0, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9g45_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC0,
+		.end	= AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC0,
+		.end	= AT91SAM9G45_ID_SSC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc0_device = {
+	.name	= "ssc",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ssc0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc0_resources,
+	.num_resources	= ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD1, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD0, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD2, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD3, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD4, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC1,
+		.end	= AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC1,
+		.end	= AT91SAM9G45_ID_SSC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc1_device = {
+	.name	= "ssc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ssc1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc1_resources,
+	.num_resources	= ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD14, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD12, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD10, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD11, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD13, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD15, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver.  For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	/*
+	 * NOTE: caller is responsible for passing information matching
+	 * "pins" to whatever will be using each particular controller.
+	 */
+	switch (id) {
+	case AT91SAM9G45_ID_SSC0:
+		pdev = &at91sam9g45_ssc0_device;
+		configure_ssc0_pins(pins);
+		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+		break;
+	case AT91SAM9G45_ID_SSC1:
+		pdev = &at91sam9g45_ssc1_device;
+		configure_ssc1_pins(pins);
+		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+		break;
+	default:
+		return;
+	}
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &dbgu_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &dbgu_data,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB13, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US0,
+		.end	= AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US0,
+		.end	= AT91SAM9G45_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &uart0_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart0_data,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB19, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RXD0 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PB17, 0);	/* RTS0 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PB15, 0);	/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US1,
+		.end	= AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US1,
+		.end	= AT91SAM9G45_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.dma_mask		= &uart1_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart1_data,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PD16, 0);	/* RTS1 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PD17, 0);	/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US2,
+		.end	= AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US2,
+		.end	= AT91SAM9G45_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.dma_mask		= &uart2_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart2_data,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD2 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PC9, 0);	/* RTS2 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PC11, 0);	/* CTS2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US3,
+		.end	= AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US3,
+		.end	= AT91SAM9G45_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart3_device = {
+	.name		= "atmel_usart",
+	.id		= 4,
+	.dev		= {
+				.dma_mask		= &uart3_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart3_data,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD3 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PA23, 0);	/* RTS3 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PA24, 0);	/* CTS3 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+		case 0:		/* DBGU */
+			pdev = &at91sam9g45_dbgu_device;
+			configure_dbgu_pins();
+			at91_clock_associate("mck", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US0:
+			pdev = &at91sam9g45_uart0_device;
+			configure_usart0_pins(pins);
+			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US1:
+			pdev = &at91sam9g45_uart1_device;
+			configure_usart1_pins(pins);
+			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US2:
+			pdev = &at91sam9g45_uart2_device;
+			configure_usart2_pins(pins);
+			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US3:
+			pdev = &at91sam9g45_uart3_device;
+			configure_usart3_pins(pins);
+			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+			break;
+		default:
+			return;
+	}
+	pdev->id = portnr;		/* update to mapped ID */
+
+	if (portnr < ATMEL_MAX_UART)
+		at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+	if (portnr < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtc();
+	at91_add_device_rtt();
+	at91_add_device_watchdog();
+	at91_add_device_tc();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
new file mode 100644
index 00000000000..b8558eae522
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -0,0 +1,389 @@
+/*
+ *  Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ *  Covers: * AT91SAM9G45-EKES  board
+ *          * AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.000 MHz crystal */
+	at91sam9g45_initialize(12000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 not connected on the -EK board */
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9g45_init_interrupts(NULL);
+}
+
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+	.ports		= 2,
+	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+	.vbus_pin	= AT91_PIN_PB19,
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PD5,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= SZ_64M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC8,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+		.name           = "LG",
+		.refresh	= 60,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 1,		.right_margin	= 1,
+		.upper_margin	= 40,		.lower_margin	= 1,
+		.hsync_len	= 45,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "LG",
+	.monitor        = "LB043WQ1",
+
+	.modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 17640,
+	.vfmin		= 57,
+	.vfmax		= 67,
+};
+
+#define AT91SAM9G45_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight		= true,
+	.default_bpp			= 32,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= AT91SAM9G45_DEFAULT_LCDCON2,
+	.default_monspecs		= &at91fb_default_monspecs,
+	.guard_time			= 9,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* BP1, "leftclic" */
+		.code		= BTN_LEFT,
+		.gpio		= AT91_PIN_PB6,
+		.active_low	= 1,
+		.desc		= "left_click",
+		.wakeup		= 1,
+	},
+	{	/* BP2, "rightclic" */
+		.code		= BTN_RIGHT,
+		.gpio		= AT91_PIN_PB7,
+		.active_low	= 1,
+		.desc		= "right_click",
+		.wakeup		= 1,
+	},
+		/* BP3, "joystick" */
+	{
+		.code		= KEY_LEFT,
+		.gpio		= AT91_PIN_PB14,
+		.active_low	= 1,
+		.desc		= "Joystick Left",
+	},
+	{
+		.code		= KEY_RIGHT,
+		.gpio		= AT91_PIN_PB15,
+		.active_low	= 1,
+		.desc		= "Joystick Right",
+	},
+	{
+		.code		= KEY_UP,
+		.gpio		= AT91_PIN_PB16,
+		.active_low	= 1,
+		.desc		= "Joystick Up",
+	},
+	{
+		.code		= KEY_DOWN,
+		.gpio		= AT91_PIN_PB17,
+		.active_low	= 1,
+		.desc		= "Joystick Down",
+	},
+	{
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB18,
+		.active_low	= 1,
+		.desc		= "Joystick Press",
+	},
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
+		at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
+		at91_set_deglitch(ek_buttons[i].gpio, 1);
+	}
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "top" led, red, powerled */
+		.name			= "d8",
+		.gpio			= AT91_PIN_PD30,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* "left" led, green, userled2, pwm3 */
+		.name			= "d6",
+		.gpio			= AT91_PIN_PD0,
+		.active_low		= 1,
+		.default_trigger	= "nand-disk",
+	},
+#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= AT91_PIN_PD31,
+		.active_low		= 1,
+		.default_trigger	= "mmc0",
+	},
+#endif
+};
+
+
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+#endif
+};
+
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB HS Host */
+	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+	/* USB HS Device */
+	at91_add_device_usba(&ek_usba_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* NAND */
+	ek_add_device_nand();
+	/* I2C */
+	at91_add_device_i2c(0, NULL, 0);
+	/* LCD Controller */
+	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+}
+
+MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f5e01..88e413b3848 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,6 +14,7 @@ extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
 extern void __init at91sam9rl_initialize(unsigned long main_clock);
+extern void __init at91sam9g45_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91cap9_initialize(unsigned long main_clock);
 
@@ -23,6 +24,7 @@ extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91cap9_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b8..74801d275cd 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -80,7 +80,8 @@ struct at91_eth_data {
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #define eth_platform_data	at91_eth_data
 #endif
 
@@ -90,6 +91,7 @@ struct at91_usbh_data {
 	u8		vbus_pin[2];	/* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
@@ -105,7 +107,11 @@ struct atmel_nand_data {
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
 extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
 
  /* SPI */
 extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-- 
cgit v1.2.3


From 9fb24cc50045ec8d13d0a6c3d4d454750b466d61 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 27 Jun 2009 14:50:51 +0200
Subject: score: add missing #includes

Files that define a global function should #include the
header with its declaration to make sure that the prototypes
do not diverge.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/include/asm/ucontext.h | 1 +
 arch/score/kernel/module.c        | 1 +
 arch/score/kernel/process.c       | 3 +++
 arch/score/kernel/signal.c        | 4 +++-
 arch/score/kernel/sys_score.c     | 2 ++
 5 files changed, 10 insertions(+), 1 deletion(-)
 create mode 100644 arch/score/include/asm/ucontext.h

(limited to 'arch')

diff --git a/arch/score/include/asm/ucontext.h b/arch/score/include/asm/ucontext.h
new file mode 100644
index 00000000000..9bc07b9f30f
--- /dev/null
+++ b/arch/score/include/asm/ucontext.h
@@ -0,0 +1 @@
+#include <asm-generic/ucontext.h>
diff --git a/arch/score/kernel/module.c b/arch/score/kernel/module.c
index 4ffce7fe156..1a625572ecc 100644
--- a/arch/score/kernel/module.c
+++ b/arch/score/kernel/module.c
@@ -23,6 +23,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/moduleloader.h>
 #include <linux/module.h>
 #include <linux/vmalloc.h>
 
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
index d93966f7ac8..25d08030a88 100644
--- a/arch/score/kernel/process.c
+++ b/arch/score/kernel/process.c
@@ -24,6 +24,9 @@
  */
 
 #include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/elfcore.h>
+#include <linux/pm.h>
 
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index 5c004084d17..252f6d95ad9 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -27,7 +27,9 @@
 #include <linux/signal.h>
 #include <linux/unistd.h>
 #include <linux/uaccess.h>
-#include <asm-generic/ucontext.h>
+
+#include <asm/syscalls.h>
+#include <asm/ucontext.h>
 
 #include <asm/cacheflush.h>
 
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 33188610432..eb4d2d3b97a 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -28,6 +28,8 @@
 #include <linux/mman.h>
 #include <linux/module.h>
 #include <linux/unistd.h>
+#include <linux/syscalls.h>
+#include <asm/syscalls.h>
 
 unsigned long shm_align_mask = PAGE_SIZE - 1;
 EXPORT_SYMBOL(shm_align_mask);
-- 
cgit v1.2.3


From a1f8213b9518d0e9124a48a34bdd58b4bc2650e5 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 27 Jun 2009 15:05:30 +0200
Subject: score: add address space annotations

Annotate the address space for pointers that are used
correctly with __user and __iomem, so that sparse
can better warn about incorrect casts.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/include/asm/uaccess.h |  4 ++--
 arch/score/kernel/ptrace.c       |  7 ++++---
 arch/score/kernel/signal.c       | 10 +++++-----
 arch/score/kernel/sys_score.c    |  9 +++++----
 4 files changed, 16 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/uaccess.h b/arch/score/include/asm/uaccess.h
index 43ce28a1d0f..6f09e2b7ddb 100644
--- a/arch/score/include/asm/uaccess.h
+++ b/arch/score/include/asm/uaccess.h
@@ -13,9 +13,9 @@ extern int fixup_exception(struct pt_regs *regs);
 #ifndef __ASSEMBLY__
 
 #define __range_ok(addr, size)					\
-	((((unsigned long)(addr) >= 0x80000000)			\
+	((((unsigned long __force)(addr) >= 0x80000000)			\
 	|| ((unsigned long)(size) > 0x80000000)			\
-	|| (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000)))
+	|| (((unsigned long __force)(addr) + (unsigned long)(size)) > 0x80000000)))
 
 #define __access_ok(addr, size) \
 	(__range_ok((addr), (size)) == 0)
diff --git a/arch/score/kernel/ptrace.c b/arch/score/kernel/ptrace.c
index 19911e3187b..1db876b1147 100644
--- a/arch/score/kernel/ptrace.c
+++ b/arch/score/kernel/ptrace.c
@@ -267,6 +267,7 @@ long
 arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
+	unsigned long __user *datap = (void __user *)data;
 
 	switch (request) {
 	/* Read the word at location addr in the USER area.  */
@@ -316,7 +317,7 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			return -EIO;
 		}
 
-		ret = put_user(tmp, (unsigned long *) data);
+		ret = put_user(tmp, (unsigned int __user *) datap);
 		return ret;
 	}
 
@@ -355,11 +356,11 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	}
 
 	case PTRACE_GETREGS:
-		ret = ptrace_getregs(child, (void __user *)data);
+		ret = ptrace_getregs(child, (void __user *)datap);
 		break;
 
 	case PTRACE_SETREGS:
-		ret = ptrace_setregs(child, (void __user *)data);
+		ret = ptrace_setregs(child, (void __user *)datap);
 		break;
 
 	default:
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index 252f6d95ad9..1634aaa7c2b 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -131,13 +131,13 @@ void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 	if ((ka->sa.sa_flags & SA_ONSTACK) && (!on_sig_stack(sp)))
 		sp = current->sas_ss_sp + current->sas_ss_size;
 
-	return (void *)((sp - frame_size) & ~7);
+	return (void __user*)((sp - frame_size) & ~7);
 }
 
 int score_sigaltstack(struct pt_regs *regs)
 {
-	const stack_t *uss = (const stack_t *) regs->regs[4];
-	stack_t *uoss = (stack_t *) regs->regs[5];
+	const stack_t __user *uss = (const stack_t __user *) regs->regs[4];
+	stack_t __user *uoss = (stack_t __user *) regs->regs[5];
 	unsigned long usp = regs->regs[0];
 
 	return do_sigaltstack(uss, uoss, usp);
@@ -188,7 +188,7 @@ badframe:
 int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 		int signr, sigset_t *set, siginfo_t *info)
 {
-	struct rt_sigframe *frame;
+	struct rt_sigframe __user *frame;
 	int err = 0;
 
 	frame = get_sigframe(ka, regs, sizeof(*frame));
@@ -209,7 +209,7 @@ int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
 	err |= __put_user(0, &frame->rs_uc.uc_flags);
 	err |= __put_user(0, &frame->rs_uc.uc_link);
-	err |= __put_user((void *)current->sas_ss_sp,
+	err |= __put_user((void __user *)current->sas_ss_sp,
 				&frame->rs_uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->regs[0]),
 				&frame->rs_uc.uc_stack.ss_flags);
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index eb4d2d3b97a..16ace29935b 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -87,18 +87,19 @@ int score_clone(struct pt_regs *regs)
  * sys_execve() executes a new program.
  * This is called indirectly via a small wrapper
  */
-int score_execve(struct pt_regs *regs)
+asmlinkage long
+score_execve(struct pt_regs *regs)
 {
 	int error;
 	char *filename;
 
-	filename = getname((char *) (long) regs->regs[4]);
+	filename = getname((char __user*)regs->regs[4]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
 
-	error = do_execve(filename, (char **) (long) regs->regs[5],
-			  (char **) (long) regs->regs[6], regs);
+	error = do_execve(filename, (char __user *__user*)regs->regs[5],
+			  (char __user *__user *) regs->regs[6], regs);
 
 	putname(filename);
 	return error;
-- 
cgit v1.2.3


From bddc605955bca2d914ca621a7ef4ca6c271f55d8 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 27 Jun 2009 15:12:16 +0200
Subject: score: fix function prototypes

Syscalls should return 'long' and be marked as 'asmlinkage'.
Functions that are only used in a single file should be 'static'.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/kernel/signal.c    | 22 +++++++++++++---------
 arch/score/kernel/sys_score.c |  5 +++--
 arch/score/kernel/time.c      |  2 +-
 3 files changed, 17 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index 1634aaa7c2b..afbfe33dcf1 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -42,7 +42,7 @@ struct rt_sigframe {
 	struct ucontext rs_uc;
 };
 
-int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 {
 	int err = 0;
 	unsigned long reg;
@@ -76,7 +76,7 @@ int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	return err;
 }
 
-int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+static int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 {
 	int err = 0;
 	u32 reg;
@@ -118,8 +118,8 @@ int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 /*
  * Determine which stack to use..
  */
-void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
-			size_t frame_size)
+static void __user *get_sigframe(struct k_sigaction *ka,
+			struct pt_regs *regs, size_t frame_size)
 {
 	unsigned long sp;
 
@@ -134,7 +134,8 @@ void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
 	return (void __user*)((sp - frame_size) & ~7);
 }
 
-int score_sigaltstack(struct pt_regs *regs)
+asmlinkage long
+score_sigaltstack(struct pt_regs *regs)
 {
 	const stack_t __user *uss = (const stack_t __user *) regs->regs[4];
 	stack_t __user *uoss = (stack_t __user *) regs->regs[5];
@@ -143,7 +144,8 @@ int score_sigaltstack(struct pt_regs *regs)
 	return do_sigaltstack(uss, uoss, usp);
 }
 
-void score_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long
+score_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
 	sigset_t set;
@@ -183,9 +185,11 @@ void score_rt_sigreturn(struct pt_regs *regs)
 
 badframe:
 	force_sig(SIGSEGV, current);
+
+	return 0;
 }
 
-int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
+static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 		int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe __user *frame;
@@ -238,7 +242,7 @@ give_sigsegv:
 	return -EFAULT;
 }
 
-int handle_signal(unsigned long sig, siginfo_t *info,
+static int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
 {
 	int ret;
@@ -278,7 +282,7 @@ int handle_signal(unsigned long sig, siginfo_t *info,
 	return ret;
 }
 
-void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
 {
 	struct k_sigaction ka;
 	sigset_t *oldset;
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 16ace29935b..5b3cc4e685a 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -34,7 +34,7 @@
 unsigned long shm_align_mask = PAGE_SIZE - 1;
 EXPORT_SYMBOL(shm_align_mask);
 
-asmlinkage unsigned long
+asmlinkage unsigned
 sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
 	  unsigned long flags, unsigned long fd, unsigned long pgoff)
 {
@@ -66,7 +66,8 @@ sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
  * Clone a task - this clones the calling program thread.
  * This is called indirectly via a small wrapper
  */
-int score_clone(struct pt_regs *regs)
+asmlinkage long
+score_clone(struct pt_regs *regs)
 {
 	unsigned long clone_flags;
 	unsigned long newsp;
diff --git a/arch/score/kernel/time.c b/arch/score/kernel/time.c
index cd66ba327ca..f0a43affb20 100644
--- a/arch/score/kernel/time.c
+++ b/arch/score/kernel/time.c
@@ -28,7 +28,7 @@
 
 #include <asm/scoreregs.h>
 
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evdev = dev_id;
 
-- 
cgit v1.2.3


From c6067472252c1d6155c7c01c93e0d580342cdb29 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 27 Jun 2009 14:46:35 +0200
Subject: score: cleanups: dead code, 0 as pointer, shadowed variables

A few smaller issues found by sparse, some code that was
never used, two instances of '0' instead of 'NULL' and
local variables shadowing another one.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/kernel/module.c    | 12 ++++++------
 arch/score/kernel/signal.c    |  2 +-
 arch/score/kernel/sys_score.c | 14 +-------------
 3 files changed, 8 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/score/kernel/module.c b/arch/score/kernel/module.c
index 1a625572ecc..4de8d47becd 100644
--- a/arch/score/kernel/module.c
+++ b/arch/score/kernel/module.c
@@ -57,17 +57,17 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
 		unsigned long loc;
 		Elf32_Sym *sym;
-		s32 offset;
+		s32 r_offset;
 
-		offset = ELF32_R_SYM(rel->r_info);
-		if ((offset < 0) ||
-		    (offset > (symsec->sh_size / sizeof(Elf32_Sym)))) {
+		r_offset = ELF32_R_SYM(rel->r_info);
+		if ((r_offset < 0) ||
+		    (r_offset > (symsec->sh_size / sizeof(Elf32_Sym)))) {
 			printk(KERN_ERR "%s: bad relocation, section %d reloc %d\n",
 				me->name, relindex, i);
 				return -ENOEXEC;
 		}
 
-		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
+		sym = ((Elf32_Sym *)symsec->sh_addr) + r_offset;
 
 		if ((rel->r_offset < 0) ||
 		    (rel->r_offset > dstsec->sh_size - sizeof(u32))) {
@@ -152,7 +152,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 /* Given an address, look for it in the module exception tables. */
 const struct exception_table_entry *search_module_dbetables(unsigned long addr)
 {
-	return 0;
+	return NULL;
 }
 
 /* Put in dbe list if necessary. */
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index afbfe33dcf1..950f87c4a16 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -212,7 +212,7 @@ static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 
 	err |= copy_siginfo_to_user(&frame->rs_info, info);
 	err |= __put_user(0, &frame->rs_uc.uc_flags);
-	err |= __put_user(0, &frame->rs_uc.uc_link);
+	err |= __put_user(NULL, &frame->rs_uc.uc_link);
 	err |= __put_user((void __user *)current->sas_ss_sp,
 				&frame->rs_uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->regs[0]),
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 5b3cc4e685a..61aff8a9344 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -31,10 +31,7 @@
 #include <linux/syscalls.h>
 #include <asm/syscalls.h>
 
-unsigned long shm_align_mask = PAGE_SIZE - 1;
-EXPORT_SYMBOL(shm_align_mask);
-
-asmlinkage unsigned
+asmlinkage long 
 sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
 	  unsigned long flags, unsigned long fd, unsigned long pgoff)
 {
@@ -106,15 +103,6 @@ score_execve(struct pt_regs *regs)
 	return error;
 }
 
-/*
- * If we ever come here the user sp is bad.  Zap the process right away.
- * Due to the bad stack signaling wouldn't work.
- */
-void bad_stack(void)
-{
-	do_exit(SIGSEGV);
-}
-
 /*
  * Do a system call from kernel instead of calling sys_execve so we
  * end up with proper pt_regs.
-- 
cgit v1.2.3


From 9b05706a744da939655525eeeae23f1989b434ce Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 27 Jun 2009 15:22:00 +0200
Subject: score: make irq.h definitions local

Some internal definitions of the interrupt controller are
only needed in irq.c, so move them out of the global irq.h
header. Also add proper __iomem annotations for sparse.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/include/asm/irq.h | 10 ----------
 arch/score/kernel/irq.c      | 33 +++++++++++++++++++++++----------
 2 files changed, 23 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/irq.h b/arch/score/include/asm/irq.h
index 401f6704848..6edd2a2adef 100644
--- a/arch/score/include/asm/irq.h
+++ b/arch/score/include/asm/irq.h
@@ -18,16 +18,6 @@
 
 #define irq_canonicalize(irq)	(irq)
 
-#define P_INT_PNDL		0x95F50000
-#define P_INT_PNDH		0x95F50004
-#define P_INT_PRIORITY_M	0x95F50008
-#define P_INT_PRIORITY_SG0	0x95F50010
-#define P_INT_PRIORITY_SG1	0x95F50014
-#define P_INT_PRIORITY_SG2	0x95F50018
-#define P_INT_PRIORITY_SG3	0x95F5001C
-#define P_INT_MASKL		0x95F50020
-#define P_INT_MASKH		0x95F50024
-
 #define IRQ_TIMER (7)		/* Timer IRQ number of SPCT6600 */
 
 #endif /* _ASM_SCORE_IRQ_H */
diff --git a/arch/score/kernel/irq.c b/arch/score/kernel/irq.c
index 55474e8e972..47647dde09c 100644
--- a/arch/score/kernel/irq.c
+++ b/arch/score/kernel/irq.c
@@ -29,6 +29,19 @@
 
 #include <asm/io.h>
 
+/* the interrupt controller is hardcoded at this address */
+#define SCORE_PIC		((u32 __iomem __force *)0x95F50000)
+
+#define INT_PNDL		0
+#define INT_PNDH		1
+#define INT_PRIORITY_M		2
+#define INT_PRIORITY_SG0	4
+#define INT_PRIORITY_SG1	5
+#define INT_PRIORITY_SG2	6
+#define INT_PRIORITY_SG3	7
+#define INT_MASKL		8
+#define INT_MASKH		9
+
 /*
  * handles all normal device IRQs
  */
@@ -44,11 +57,11 @@ static void score_mask(unsigned int irq_nr)
 	unsigned int irq_source = 63 - irq_nr;
 
 	if (irq_source < 32)
-		__raw_writel((__raw_readl((void *)P_INT_MASKL) | \
-			(1 << irq_source)), (void *)P_INT_MASKL);
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKL) | \
+			(1 << irq_source)), SCORE_PIC + INT_MASKL);
 	else
-		__raw_writel((__raw_readl((void *)P_INT_MASKH) | \
-			(1 << (irq_source - 32))), (void *)P_INT_MASKH);
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKH) | \
+			(1 << (irq_source - 32))), SCORE_PIC + INT_MASKH);
 }
 
 static void score_unmask(unsigned int irq_nr)
@@ -56,11 +69,11 @@ static void score_unmask(unsigned int irq_nr)
 	unsigned int irq_source = 63 - irq_nr;
 
 	if (irq_source < 32)
-		__raw_writel((__raw_readl((void *)P_INT_MASKL) & \
-			~(1 << irq_source)), (void *)P_INT_MASKL);
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKL) & \
+			~(1 << irq_source)), SCORE_PIC + INT_MASKL);
 	else
-		__raw_writel((__raw_readl((void *)P_INT_MASKH) & \
-			~(1 << (irq_source - 32))), (void *)P_INT_MASKH);
+		__raw_writel((__raw_readl(SCORE_PIC + INT_MASKH) & \
+			~(1 << (irq_source - 32))), SCORE_PIC + INT_MASKH);
 }
 
 struct irq_chip score_irq_chip = {
@@ -88,8 +101,8 @@ void __init init_IRQ(void)
 		memcpy((void *)target_addr, \
 			interrupt_exception_vector, IRQ_VECTOR_SIZE);
 
-	__raw_writel(0xffffffff, (void *)P_INT_MASKL);
-	__raw_writel(0xffffffff, (void *)P_INT_MASKH);
+	__raw_writel(0xffffffff, SCORE_PIC + INT_MASKL);
+	__raw_writel(0xffffffff, SCORE_PIC + INT_MASKH);
 
 	__asm__ __volatile__(
 		"mtcr	%0, cr3\n\t"
-- 
cgit v1.2.3


From fbd85b0e26bab0a13dcf860f2c20e86cb0507b61 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 27 Jun 2009 15:58:13 +0200
Subject: score: clean up mm/init.c

score does not need multiple zero pages, because it does not
suffer from cache aliasing problems, so simplify that code.
Also make some functions static and include the appropriate
header files.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/score/mm/init.c | 34 ++++++++++------------------------
 1 file changed, 10 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
index 7780eecc5a4..d496e9f1a60 100644
--- a/arch/score/mm/init.c
+++ b/arch/score/mm/init.c
@@ -32,44 +32,30 @@
 #include <linux/pagemap.h>
 #include <linux/proc_fs.h>
 #include <linux/sched.h>
-#include <asm-generic/sections.h>
+#include <linux/initrd.h>
 
+#include <asm/sections.h>
 #include <asm/tlb.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-/*
- * We have up to 8 empty zeroed pages so we can map one of the right colour
- * when needed.
- */
-unsigned long zero_page_mask;
 unsigned long empty_zero_page;
 EXPORT_SYMBOL_GPL(empty_zero_page);
 
 static struct kcore_list kcore_mem, kcore_vmalloc;
 
-unsigned long setup_zero_pages(void)
+static unsigned long setup_zero_page(void)
 {
-	unsigned int order = 0;
-	unsigned long size;
 	struct page *page;
 
-	empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order);
+	empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, 0);
 	if (!empty_zero_page)
 		panic("Oh boy, that early out of memory?");
 
 	page = virt_to_page((void *) empty_zero_page);
-	split_page(page, order);
-	while (page < virt_to_page((void *) (empty_zero_page +
-					     (PAGE_SIZE << order)))) {
-		SetPageReserved(page);
-		page++;
-	}
-
-	size = PAGE_SIZE << order;
-	zero_page_mask = (size - 1) & PAGE_MASK;
+	SetPageReserved(page);
 
-	return 1UL << order;
+	return 1UL;
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
@@ -100,7 +86,7 @@ void __init mem_init(void)
 	max_mapnr = max_low_pfn;
 	high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT);
 	totalram_pages += free_all_bootmem();
-	totalram_pages -= setup_zero_pages();	/* Setup zeroed pages. */
+	totalram_pages -= setup_zero_page();	/* Setup zeroed pages. */
 	reservedpages = 0;
 
 	for (tmp = 0; tmp < max_low_pfn; tmp++)
@@ -129,7 +115,7 @@ void __init mem_init(void)
 }
 #endif /* !CONFIG_NEED_MULTIPLE_NODES */
 
-void free_init_pages(const char *what, unsigned long begin, unsigned long end)
+static void free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
 	unsigned long pfn;
 
@@ -150,8 +136,8 @@ void free_init_pages(const char *what, unsigned long begin, unsigned long end)
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
 	free_init_pages("initrd memory",
-	virt_to_phys((void *) start),
-	virt_to_phys((void *) end));
+		virt_to_phys((void *) start),
+		virt_to_phys((void *) end));
 }
 #endif
 
-- 
cgit v1.2.3


From ff8a4bae459a9b6455504127fcb78fdbc8e50e4c Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Sat, 27 Jun 2009 12:22:27 -0700
Subject: Revert "x86: cap iomem_resource to addressable physical memory"

This reverts commit 95ee14e4379c5e19c0897c872350570402014742.
Mikael Petterson <mikepe@it.uu.se> reported that at least one of his
systems will not boot as a result.  We have ruled out the detection
algorithm malfunctioning, so it is not a matter of producing the
incorrect bitmasks; rather, something in the application of them
fails.

Revert the commit until we can root cause and correct this problem.

-stable team: this means the underlying commit should be rejected.

Reported-and-isolated-by: Mikael Petterson <mikpe@it.uu.se>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <200906261559.n5QFxJH8027336@pilspetsen.it.uu.se>
Cc: stable@kernel.org
Cc: Grant Grundler <grundler@parisc-linux.org>
---
 arch/x86/kernel/cpu/common.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 6b26d4deada..f1961c07af9 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -848,9 +848,6 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	numa_add_cpu(smp_processor_id());
 #endif
-
-	/* Cap the iomem address space to what is addressable on all CPUs */
-	iomem_resource.end &= (1ULL << c->x86_phys_bits) - 1;
 }
 
 #ifdef CONFIG_X86_64
-- 
cgit v1.2.3


From 29a4b9333bf9ffef12b3dd7cbf2e3dbe01152968 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 19 May 2009 13:29:27 +0300
Subject: KVM: MMU: Allow 4K ptes with bit 7 (PAT) set

Bit 7 is perfectly legal in the 4K page leve; it is used for the PAT.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5c3d6e81a7d..7030b5f911b 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2157,7 +2157,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		else
 			/* 32 bits PSE 4MB page */
 			context->rsvd_bits_mask[1][1] = rsvd_bits(13, 21);
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	case PT32E_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][2] =
@@ -2170,7 +2170,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 62) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	case PT64_ROOT_LEVEL:
 		context->rsvd_bits_mask[0][3] = exb_bit_rsvd |
@@ -2186,7 +2186,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51) |
 			rsvd_bits(13, 20);		/* large page */
-		context->rsvd_bits_mask[1][0] = ~0ull;
+		context->rsvd_bits_mask[1][0] = context->rsvd_bits_mask[1][0];
 		break;
 	}
 }
-- 
cgit v1.2.3


From ffdfa071bd6fa8f5e5964569bef41e067540d424 Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Wed, 17 Jun 2009 11:08:08 +0200
Subject: KVM: ia64: fix ia64 build due to missing kallsyms_lookup() and double
 export

Fix problem with double export of certain symbols from vsprintf.c
which we do not wish to export from the kvm-intel.ko module.

In addition, we do not have access to kallsyms_lookup() from the
module, so make sure to #undef CONFIG_KALLSYMS

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm_lib.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm_lib.c b/arch/ia64/kvm/kvm_lib.c
index a85cb611ecd..f1268b8e6f9 100644
--- a/arch/ia64/kvm/kvm_lib.c
+++ b/arch/ia64/kvm/kvm_lib.c
@@ -11,5 +11,11 @@
  *
  */
 #undef CONFIG_MODULES
+#include <linux/module.h>
+#undef CONFIG_KALLSYMS
+#undef EXPORT_SYMBOL
+#undef EXPORT_SYMBOL_GPL
+#define EXPORT_SYMBOL(sym)
+#define EXPORT_SYMBOL_GPL(sym)
 #include "../../../lib/vsprintf.c"
 #include "../../../lib/ctype.c"
-- 
cgit v1.2.3


From a3f9d3981cd82d65232b733eb792382237d686bd Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Thu, 18 Jun 2009 16:53:25 +0530
Subject: KVM: kvm/x86_emulate.c toggle_interruptibility() should be static

toggle_interruptibility() is used only by same file, it should be static.

Fixed following sparse warning :

  arch/x86/kvm/x86_emulate.c:1364:6: warning: symbol 'toggle_interruptibility' was not declared. Should it be static?

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index c1b6c232e02..616de4628d6 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1361,7 +1361,7 @@ static inline int writeback(struct x86_emulate_ctxt *ctxt,
 	return 0;
 }
 
-void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
 {
 	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
 	/*
-- 
cgit v1.2.3


From ef50f7ac7e234f9696555e41eab3de69c3d86166 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Tue, 23 Jun 2009 17:24:07 +0200
Subject: KVM: s390: Allow stfle instruction in the guest

2.6.31-rc introduced an architecture level set checker based on facility
bits. e.g. if the kernel is compiled to run only on z9, several facility
bits are checked very early and the kernel refuses to boot if a z9 specific
facility is missing.
Until now kvm on s390 did not implement the store facility extended (STFLE)
instruction. A 2.6.31-rc kernel that was compiled for z9 or higher did not
boot in kvm. This patch implements stfle.

This patch should go in before 2.6.31.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/include/asm/kvm_host.h |  4 +++-
 arch/s390/kvm/kvm-s390.c         | 23 ++++++++++++++++++++++-
 arch/s390/kvm/priv.c             |  2 +-
 3 files changed, 26 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index a27d0d5a6f8..1cd02f6073a 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -99,7 +99,9 @@ struct kvm_s390_sie_block {
 	__u8	reservedd0[48];		/* 0x00d0 */
 	__u64	gcr[16];		/* 0x0100 */
 	__u64	gbea;			/* 0x0180 */
-	__u8	reserved188[120];	/* 0x0188 */
+	__u8	reserved188[24];	/* 0x0188 */
+	__u32	fac;			/* 0x01a0 */
+	__u8	reserved1a4[92];	/* 0x01a4 */
 } __attribute__((packed));
 
 struct kvm_vcpu_stat {
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index c18b21d6991..90d9d1ba258 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -25,6 +25,7 @@
 #include <asm/lowcore.h>
 #include <asm/pgtable.h>
 #include <asm/nmi.h>
+#include <asm/system.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -69,6 +70,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };
 
+static unsigned long long *facilities;
 
 /* Section: not file related */
 void kvm_arch_hardware_enable(void *garbage)
@@ -288,6 +290,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
+	vcpu->arch.sie_block->fac   = (int) (long) facilities;
 	hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet,
 		     (unsigned long) vcpu);
@@ -739,11 +742,29 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 
 static int __init kvm_s390_init(void)
 {
-	return kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	int ret;
+	ret = kvm_init(NULL, sizeof(struct kvm_vcpu), THIS_MODULE);
+	if (ret)
+		return ret;
+
+	/*
+	 * guests can ask for up to 255+1 double words, we need a full page
+	 * to hold the maximum amount of facilites. On the other hand, we
+	 * only set facilities that are known to work in KVM.
+	 */
+	facilities = (unsigned long long *) get_zeroed_page(GFP_DMA);
+	if (!facilities) {
+		kvm_exit();
+		return -ENOMEM;
+	}
+	stfle(facilities, 1);
+	facilities[0] &= 0xff00fff3f0700000ULL;
+	return 0;
 }
 
 static void __exit kvm_s390_exit(void)
 {
+	free_page((unsigned long) facilities);
 	kvm_exit();
 }
 
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 93ecd06e1a7..d426aac8095 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,7 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_stfl++;
 	/* only pass the facility bits, which we can handle */
-	facility_list &= 0xfe00fff3;
+	facility_list &= 0xff00fff3;
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
-- 
cgit v1.2.3


From e3c7cb6ad7191e92ba89d00a7ae5f5dd1ca0c214 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 16 Jun 2009 14:19:52 +0300
Subject: KVM: VMX: Handle vmx instruction vmexits

IF a guest tries to use vmx instructions, inject a #UD to let it know the
instruction is not implemented, rather than crashing.

This prevents guest userspace from crashing the guest kernel.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index e770bf349ec..356a0ce85c6 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3012,6 +3012,12 @@ static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	kvm_queue_exception(vcpu, UD_VECTOR);
+	return 1;
+}
+
 static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -3198,6 +3204,15 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_HLT]                     = handle_halt,
 	[EXIT_REASON_INVLPG]		      = handle_invlpg,
 	[EXIT_REASON_VMCALL]                  = handle_vmcall,
+	[EXIT_REASON_VMCLEAR]	              = handle_vmx_insn,
+	[EXIT_REASON_VMLAUNCH]                = handle_vmx_insn,
+	[EXIT_REASON_VMPTRLD]                 = handle_vmx_insn,
+	[EXIT_REASON_VMPTRST]                 = handle_vmx_insn,
+	[EXIT_REASON_VMREAD]                  = handle_vmx_insn,
+	[EXIT_REASON_VMRESUME]                = handle_vmx_insn,
+	[EXIT_REASON_VMWRITE]                 = handle_vmx_insn,
+	[EXIT_REASON_VMOFF]                   = handle_vmx_insn,
+	[EXIT_REASON_VMON]                    = handle_vmx_insn,
 	[EXIT_REASON_TPR_BELOW_THRESHOLD]     = handle_tpr_below_threshold,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
-- 
cgit v1.2.3


From 9e6996240afcbe61682eab8eeaeb65c34333164d Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@redhat.com>
Date: Mon, 15 Jun 2009 13:25:34 +0530
Subject: KVM: Ignore reads to K7 EVNTSEL MSRs

In commit 7fe29e0faacb650d31b9e9f538203a157bec821d we ignored the
reads to the P6 EVNTSEL MSRs. That fixed crashes on Intel machines.

Ignore the reads to K7 EVNTSEL MSRs as well to fix this on AMD
hosts.

This fixes Kaspersky antivirus crashing Windows guests on AMD hosts.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 249540f9851..fe5474aec41 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -898,6 +898,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_VM_HSAVE_PA:
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
+	case MSR_K7_EVNTSEL0:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From bde892232532ed522bb56b04576d07f91e59b3c7 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 20 May 2009 09:59:35 +0530
Subject: KVM: shut up uninit compiler warning in paging_tmpl.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Dixes compilation warning:
  CC      arch/x86/kernel/io_delay.o
 arch/x86/kvm/paging_tmpl.h: In function ‘paging64_fetch’:
 arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function
 arch/x86/kvm/paging_tmpl.h: In function ‘paging32_fetch’:
 arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function

warning is bogus (always have a least one level), but need to shut the compiler
up.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/paging_tmpl.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 258e4591e1c..67785f63539 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -281,7 +281,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 {
 	unsigned access = gw->pt_access;
 	struct kvm_mmu_page *shadow_page;
-	u64 spte, *sptep;
+	u64 spte, *sptep = NULL;
 	int direct;
 	gfn_t table_gfn;
 	int r;
-- 
cgit v1.2.3


From 087975b06b00af9bf888fab6f94ae113c5cd80bd Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 27 Jun 2009 15:35:15 +0900
Subject: x86: Clean up dump_pagetable()

Use pgtable access helpers for 32-bit version dump_pagetable()
and get rid of __typeof__() operators. This needs to make
pmd_pfn() available for 2-level pgtable.

Also, remove some casts for 64-bit version dump_pagetable().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090627063514.GA2834@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 10 ++++-----
 arch/x86/mm/fault.c            | 51 +++++++++++++++++-------------------------
 2 files changed, 26 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 3cc06e3fceb..af5481e9486 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -134,6 +134,11 @@ static inline unsigned long pte_pfn(pte_t pte)
 	return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
 
 static inline int pmd_large(pmd_t pte)
@@ -422,11 +427,6 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
 	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
 }
 
-static inline unsigned long pmd_pfn(pmd_t pmd)
-{
-	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
-}
-
 static inline int pud_large(pud_t pud)
 {
 	return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff857b..9bf7e52c286 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -285,26 +285,25 @@ check_v8086_mode(struct pt_regs *regs, unsigned long address,
 		tsk->thread.screen_bitmap |= 1 << bit;
 }
 
-static void dump_pagetable(unsigned long address)
+static bool low_pfn(unsigned long pfn)
 {
-	__typeof__(pte_val(__pte(0))) page;
+	return pfn < max_low_pfn;
+}
 
-	page = read_cr3();
-	page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
+static void dump_pagetable(unsigned long address)
+{
+	pgd_t *base = __va(read_cr3());
+	pgd_t *pgd = &base[pgd_index(address)];
+	pmd_t *pmd;
+	pte_t *pte;
 
 #ifdef CONFIG_X86_PAE
-	printk("*pdpt = %016Lx ", page);
-	if ((page >> PAGE_SHIFT) < max_low_pfn
-	    && page & _PAGE_PRESENT) {
-		page &= PAGE_MASK;
-		page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
-							& (PTRS_PER_PMD - 1)];
-		printk(KERN_CONT "*pde = %016Lx ", page);
-		page &= ~_PAGE_NX;
-	}
-#else
-	printk("*pde = %08lx ", page);
+	printk("*pdpt = %016Lx ", pgd_val(*pgd));
+	if (!low_pfn(pgd_val(*pgd) >> PAGE_SHIFT) || !pgd_present(*pgd))
+		goto out;
 #endif
+	pmd = pmd_offset(pud_offset(pgd, address), address);
+	printk(KERN_CONT "*pde = %0*Lx ", sizeof(*pmd) * 2, (u64)pmd_val(*pmd));
 
 	/*
 	 * We must not directly access the pte in the highpte
@@ -312,16 +311,12 @@ static void dump_pagetable(unsigned long address)
 	 * And let's rather not kmap-atomic the pte, just in case
 	 * it's allocated already:
 	 */
-	if ((page >> PAGE_SHIFT) < max_low_pfn
-	    && (page & _PAGE_PRESENT)
-	    && !(page & _PAGE_PSE)) {
-
-		page &= PAGE_MASK;
-		page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
-							& (PTRS_PER_PTE - 1)];
-		printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
-	}
+	if (!low_pfn(pmd_pfn(*pmd)) || !pmd_present(*pmd) || pmd_large(*pmd))
+		goto out;
 
+	pte = pte_offset_kernel(pmd, address);
+	printk("*pte = %0*Lx ", sizeof(*pte) * 2, (u64)pte_val(*pte));
+out:
 	printk("\n");
 }
 
@@ -449,16 +444,12 @@ static int bad_address(void *p)
 
 static void dump_pagetable(unsigned long address)
 {
-	pgd_t *pgd;
+	pgd_t *base = __va(read_cr3() & PHYSICAL_PAGE_MASK);
+	pgd_t *pgd = base + pgd_index(address);
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 
-	pgd = (pgd_t *)read_cr3();
-
-	pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
-
-	pgd += pgd_index(address);
 	if (bad_address(pgd))
 		goto bad;
 
-- 
cgit v1.2.3


From ce0c0f9eec2f377055e8b23c6fa192202381e022 Mon Sep 17 00:00:00 2001
From: "Figo.zhang" <figo1802@gmail.com>
Date: Sun, 28 Jun 2009 18:07:39 +0800
Subject: x86, pgtable.h: Clean up types

Use "unsigned long" consistently, not "unsigned".

Signed-off-by: Figo.zhang <figo1802@gmail.com>
LKML-Reference: <1246183659.2530.4.camel@myhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index af5481e9486..9de8729c1c8 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -356,7 +356,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
  * this macro returns the index of the entry in the pmd page which would
  * control the given virtual address
  */
-static inline unsigned pmd_index(unsigned long address)
+static inline unsigned long pmd_index(unsigned long address)
 {
 	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
 }
@@ -376,7 +376,7 @@ static inline unsigned pmd_index(unsigned long address)
  * this function returns the index of the entry in the pte page which would
  * control the given virtual address
  */
-static inline unsigned pte_index(unsigned long address)
+static inline unsigned long pte_index(unsigned long address)
 {
 	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
 }
@@ -462,7 +462,7 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)
 #define pgd_page(pgd)		pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT)
 
 /* to find an entry in a page-table-directory. */
-static inline unsigned pud_index(unsigned long address)
+static inline unsigned long pud_index(unsigned long address)
 {
 	return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
 }
-- 
cgit v1.2.3


From 565b0c1f100408ccbcb04ba458a14da454cb271d Mon Sep 17 00:00:00 2001
From: "Figo.zhang" <figo1802@gmail.com>
Date: Mon, 29 Jun 2009 12:02:55 +0800
Subject: x86, highmem_32.c: Clean up comment

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>
LKML-Reference: <1246248175.5759.12.camel@myhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/highmem_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e8191..0c6f43cee25 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -24,7 +24,7 @@ void kunmap(struct page *page)
  * no global lock is needed and because the kmap code must perform a global TLB
  * invalidation when the kmap pool wraps.
  *
- * However when holding an atomic kmap is is not legal to sleep, so atomic
+ * However when holding an atomic kmap it is not legal to sleep, so atomic
  * kmaps are appropriate for short, tight code paths only.
  */
 void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-- 
cgit v1.2.3


From 9a660a6e1a0ebef72cf792583777234483a40022 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 28 Jun 2009 16:26:13 +0000
Subject: arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7206/io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a33210d6..180455642a4 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port)
 
 unsigned short se7206_inw(unsigned long port)
 {
-	return *port2adr(port);;
+	return *port2adr(port);
 }
 
 void se7206_outb(unsigned char value, unsigned long port)
-- 
cgit v1.2.3


From ec87805c63a96e8863385d79c864801a572a4ab8 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 29 Jun 2009 07:40:00 +0000
Subject: sh: ms7724se: Enable sh_eth in defconfig.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/se7724_defconfig | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270283e..3ee783a0a07 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -88,10 +91,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
-- 
cgit v1.2.3


From 4078c444cf667f018c3fc7ebf141131a2b7c9480 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 29 Jun 2009 00:41:11 -0700
Subject: perf_counter, x86: Update x86_pmu after WARN()

The print out should read the value before changing the value.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A487017.4090007@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index b83474b6021..d4cf4ce19aa 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -1496,17 +1496,17 @@ void __init init_hw_perf_counters(void)
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
-		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 		WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
 		     x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
+		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
 	}
 	perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
 	perf_max_counters = x86_pmu.num_counters;
 
 	if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
-		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 		WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
 		     x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
+		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
 	}
 
 	perf_counter_mask |=
-- 
cgit v1.2.3


From 59c5fe6d848cae8fd51498d17532f5aad3866f98 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Mon, 29 Jun 2009 12:11:50 +0100
Subject: [ARM] 5562/2: at91: add gpio button support for at91sam9g20ek

This adds input keyboard gpio support on at91sam9g20ek board.
It adds button 3 and 4.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9g20ek.c | 54 ++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..a55398ed121 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
@@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */
-- 
cgit v1.2.3


From c7ab48d2acaf959e4d59c3f55d12fdb7ca9afd7c Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Fri, 26 Jun 2009 19:10:36 +0100
Subject: intel-iommu: Clean up identity mapping code, remove
 CONFIG_DMAR_GFX_WA

There's no need for the GFX workaround now we have 'iommu=pt' for the
cases where people really care about performance. There's no need to
have a special case for just one type of device.

This also speeds up the iommu=pt path and reduces memory usage by
setting up the si_domain _once_ and then using it for all devices,
rather than giving each device its own private page tables.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/x86/Kconfig | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef6b4f..c07f7220590 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1913,25 +1913,14 @@ config DMAR_DEFAULT_ON
 	  recommended you say N here while the DMAR code remains
 	  experimental.
 
-config DMAR_GFX_WA
-	def_bool y
-	prompt "Support for Graphics workaround"
-	depends on DMAR
-	---help---
-	  Current Graphics drivers tend to use physical address
-	  for DMA and avoid using DMA APIs. Setting this config
-	  option permits the IOMMU driver to set a unity map for
-	  all the OS-visible memory. Hence the driver can continue
-	  to use physical addresses for DMA.
-
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
 	---help---
-	  Floppy disk drivers are know to bypass DMA API calls
+	  Floppy disk drivers are known to bypass DMA API calls
 	  thereby failing to work when IOMMU is enabled. This
 	  workaround will setup a 1:1 mapping for the first
-	  16M to make floppy (an ISA device) work.
+	  16MiB to make floppy (an ISA device) work.
 
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
-- 
cgit v1.2.3


From 977badb2f385db14d8ba3fcf02fbd7ead8e63d0f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Fernando=20Luis=20V=C3=A1zquez=20Cao?=
 <fernando@oss.ntt.co.jp>
Date: Fri, 26 Jun 2009 11:27:41 +0900
Subject: PCI: remove pci_dac_dma_... APIs on mn10300

It seems that mn10300 made it upstream after Jan Beulich's pci_dac_dma_*
cleanup work and still defines pci_dac_dma_supported(). This API is not
required by the PCI subsystem anymore, so remove it.

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/mn10300/include/asm/pci.h | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index e58b9a46e1b..35d2ed6396f 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -70,10 +70,6 @@ struct pci_dev;
  */
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask)	(0)
-
 /* Return the index of the PCI controller for device. */
 static inline int pci_controller_num(struct pci_dev *dev)
 {
-- 
cgit v1.2.3


From 2cdb3f1d834aab27a927be7555fbf4f9e43e9261 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 24 Jun 2009 19:01:19 -0700
Subject: x86/PCI: fix boundary checking when using root CRS

Don't touch info->res_num if we are out of space.

Acked-by: Gary Hade <garyhade@us.ibm.com>
Tested-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/acpi.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index b26626dc517..8bf152910eb 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -68,6 +68,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	unsigned long flags;
 	struct resource *root;
 	int max_root_bus_resources = PCI_BUS_NUM_RESOURCES;
+	u64 start, end;
+
+	if (bus_has_transparent_bridge(info->bus))
+		max_root_bus_resources -= 3;
 
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
@@ -84,25 +88,24 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	} else
 		return AE_OK;
 
-	res = &info->res[info->res_num];
-	res->name = info->name;
-	res->flags = flags;
-	res->start = addr.minimum + addr.translation_offset;
-	res->end = res->start + addr.address_length - 1;
-	res->child = NULL;
-
-	if (bus_has_transparent_bridge(info->bus))
-		max_root_bus_resources -= 3;
+	start = addr.minimum + addr.translation_offset;
+	end = start + addr.address_length - 1;
 	if (info->res_num >= max_root_bus_resources) {
 		printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx "
 			"from %s for %s due to _CRS returning more than "
-			"%d resource descriptors\n", (unsigned long) res->start,
-			(unsigned long) res->end, root->name, info->name,
+			"%d resource descriptors\n", (unsigned long) start,
+			(unsigned long) end, root->name, info->name,
 			max_root_bus_resources);
-		info->res_num++;
 		return AE_OK;
 	}
 
+	res = &info->res[info->res_num];
+	res->name = info->name;
+	res->flags = flags;
+	res->start = start;
+	res->end = end;
+	res->child = NULL;
+
 	if (insert_resource(root, res)) {
 		printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx "
 			"from %s for %s\n", (unsigned long) res->start,
-- 
cgit v1.2.3


From 626fdfec1588ac1341a37805809d03a719d977e0 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 24 Jun 2009 20:00:12 -0700
Subject: x86/PCI: get root CRS before scanning children

This allows us to remove adjust_transparent_bridge_resources and give
x86_pci_root_bus_res_quirks a chance when _CRS is not used or not there.

Acked-by: Gary Hade <garyhade@us.ibm.com>
Tested-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/acpi.c    | 32 +++++++++-----------------------
 arch/x86/pci/amd_bus.c |  8 ++++++--
 2 files changed, 15 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 8bf152910eb..1014eb4bfc3 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -117,23 +117,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	return AE_OK;
 }
 
-static void
-adjust_transparent_bridge_resources(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		int i;
-		u16 class = dev->class >> 8;
-
-		if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) {
-			for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++)
-				dev->subordinate->resource[i] =
-						dev->bus->resource[i - 3];
-		}
-	}
-}
-
 static void
 get_current_resources(struct acpi_device *device, int busnum,
 			int domain, struct pci_bus *bus)
@@ -161,8 +144,6 @@ get_current_resources(struct acpi_device *device, int busnum,
 	info.res_num = 0;
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
-	if (info.res_num)
-		adjust_transparent_bridge_resources(bus);
 
 	return;
 
@@ -225,8 +206,15 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 		 */
 		memcpy(bus->sysdata, sd, sizeof(*sd));
 		kfree(sd);
-	} else
-		bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+	} else {
+		bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+		if (bus) {
+			if (pci_probe & PCI_USE__CRS)
+				get_current_resources(device, busnum, domain,
+							bus);
+			bus->subordinate = pci_scan_child_bus(bus);
+		}
+	}
 
 	if (!bus)
 		kfree(sd);
@@ -241,8 +229,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 #endif
 	}
 
-	if (bus && (pci_probe & PCI_USE__CRS))
-		get_current_resources(device, busnum, domain, bus);
 	return bus;
 }
 
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index f893d6a6e80..3ffa10df20b 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -100,8 +100,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	int j;
 	struct pci_root_info *info;
 
-	/* don't go for it if _CRS is used */
-	if (pci_probe & PCI_USE__CRS)
+	/* don't go for it if _CRS is used already */
+	if (b->resource[0] != &ioport_resource ||
+	    b->resource[1] != &iomem_resource)
 		return;
 
 	/* if only one root bus, don't need to anything */
@@ -116,6 +117,9 @@ void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 	if (i == pci_root_num)
 		return;
 
+	printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
+			b->number);
+
 	info = &pci_root_info[i];
 	for (j = 0; j < info->res_num; j++) {
 		struct resource *res;
-- 
cgit v1.2.3


From 2be8412c6cef97b01dfaae71c04bf585d3d93a3b Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Tue, 30 Jun 2009 14:02:00 -0700
Subject: [IA64] sprintf should not be used with same source & destination
 address

This happens to work at the moment but isn't a good idea so fix it the
simple way.

Resolves-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13576

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/sn/kernel/io_common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index 76645cf6ac5..25831c47c57 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -435,7 +435,8 @@ void sn_generate_path(struct pci_bus *pci_bus, char *address)
 	bricktype = MODULE_GET_BTYPE(moduleid);
 	if ((bricktype == L1_BRICKTYPE_191010) ||
 	    (bricktype == L1_BRICKTYPE_1932))
-			sprintf(address, "%s^%d", address, geo_slot(geoid));
+			sprintf(address + strlen(address), "^%d",
+						geo_slot(geoid));
 }
 
 void __devinit
-- 
cgit v1.2.3


From 58782b34e9ffcc04619634efe9658263344ed188 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 28 Jun 2009 09:26:07 -0700
Subject: [IA64] Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/esi.c  | 2 +-
 arch/ia64/kvm/process.c | 6 +++---
 arch/ia64/kvm/vcpu.c    | 2 +-
 arch/ia64/kvm/vtlb.c    | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index ebf4e988e78..d5764a3d74a 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -65,7 +65,7 @@ static int __init esi_init (void)
 	}
 
 	if (!esi)
-		return -ENODEV;;
+		return -ENODEV;
 
 	systab = __va(esi);
 
diff --git a/arch/ia64/kvm/process.c b/arch/ia64/kvm/process.c
index a8f84da04b4..bb862fb224f 100644
--- a/arch/ia64/kvm/process.c
+++ b/arch/ia64/kvm/process.c
@@ -130,7 +130,7 @@ static void collect_interruption(struct kvm_vcpu *vcpu)
 	if (vdcr & IA64_DCR_PP) {
 		vpsr |= IA64_PSR_PP;
 	} else {
-		vpsr &= ~IA64_PSR_PP;;
+		vpsr &= ~IA64_PSR_PP;
 	}
 
 	vcpu_set_psr(vcpu, vpsr);
@@ -594,11 +594,11 @@ static void set_pal_call_data(struct kvm_vcpu *vcpu)
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 		break;
 	case PAL_BRAND_INFO:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = kvm_trans_pal_call_args(vcpu, gr30);
 		break;
 	default:
-		p->u.pal_data.gr29 = gr29;;
+		p->u.pal_data.gr29 = gr29;
 		p->u.pal_data.gr30 = vcpu_get_gr(vcpu, 30);
 	}
 	p->u.pal_data.gr28 = gr28;
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index a2c6c15e476..46b02cbcc87 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -406,7 +406,7 @@ void getreg(unsigned long regnum, unsigned long *val,
 	 * Now look at registers in [0-31] range and init correct UNAT
 	 */
 	addr = (unsigned long)regs;
-	unat = &regs->eml_unat;;
+	unat = &regs->eml_unat;
 
 	addr += gr_info[regnum];
 
diff --git a/arch/ia64/kvm/vtlb.c b/arch/ia64/kvm/vtlb.c
index 4290a429bf7..20b3852f7a6 100644
--- a/arch/ia64/kvm/vtlb.c
+++ b/arch/ia64/kvm/vtlb.c
@@ -135,7 +135,7 @@ struct thash_data *__vtr_lookup(struct kvm_vcpu *vcpu, u64 va, int type)
 	u64 rid;
 
 	rid = vcpu_get_rr(vcpu, va);
-	rid = rid & RR_RID_MASK;;
+	rid = rid & RR_RID_MASK;
 	if (type == D_TLB) {
 		if (vcpu_quick_region_check(vcpu->arch.dtr_regions, va)) {
 			for (trp = (struct thash_data *)&vcpu->arch.dtrs, i = 0;
@@ -518,7 +518,7 @@ struct thash_data *vtlb_lookup(struct kvm_vcpu *v, u64 va, int is_data)
 
 	struct thash_cb *hcb = &v->arch.vtlb;
 
-	cch = __vtr_lookup(v, va, is_data);;
+	cch = __vtr_lookup(v, va, is_data);
 	if (cch)
 		return cch;
 
-- 
cgit v1.2.3


From fa276f36f3d8743295e067fb483b42dca8bd1ece Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Tue, 30 Jun 2009 12:01:57 +0100
Subject: [IA64] address compiler warnings perfmon.c/salinfo.c

perfmon.c has a dubious cast directly from "int" to "void *". Add
an intermediate cast to "long" to keep gcc happy.

salinfo.c uses "down_trylock()" in a highly creative way (explained
in the comments in the file) ... but it does kick out this warning:

 arch/ia64/kernel/salinfo.c:195: warning: ignoring return value of 'down_trylock'

which people occasionally try to "fix" in ways that do not work. Use some
casts to keep gcc quiet.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/perfmon.c | 2 +-
 arch/ia64/kernel/salinfo.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index abce2468a40..f1782705b1f 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5603,7 +5603,7 @@ pfm_interrupt_handler(int irq, void *arg)
  * /proc/perfmon interface, for debug only
  */
 
-#define PFM_PROC_SHOW_HEADER	((void *)nr_cpu_ids+1)
+#define PFM_PROC_SHOW_HEADER	((void *)(long)nr_cpu_ids+1)
 
 static void *
 pfm_proc_start(struct seq_file *m, loff_t *pos)
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 7053c55b764..e6676fca482 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -192,7 +192,7 @@ struct salinfo_platform_oemdata_parms {
 static void
 salinfo_work_to_do(struct salinfo_data *data)
 {
-	down_trylock(&data->mutex);
+	(void)(down_trylock(&data->mutex) ?: 0);
 	up(&data->mutex);
 }
 
-- 
cgit v1.2.3


From 9e314996e3dc5189b9b36dce67088e882e989897 Mon Sep 17 00:00:00 2001
From: Mike Galbraith <efault@gmx.de>
Date: Tue, 30 Jun 2009 15:00:20 +0200
Subject: x86: Fix symbol annotation for
 arch/x86/lib/clear_page_64.S::clear_page_c

Noticed the zero-sized function symbol while looking at 'perf' profiles,
it causes the profiler to display those addresses in hexa.

Turns out that this was wrong/bogus for an eternity.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1246366820.6538.1.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/clear_page_64.S | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index 9a10a78bb4a..ebeafcce04a 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -5,15 +5,14 @@
  * Zero a page. 	
  * rdi	page
  */			
-	ALIGN
-clear_page_c:
+ENTRY(clear_page_c)
 	CFI_STARTPROC
 	movl $4096/8,%ecx
 	xorl %eax,%eax
 	rep stosq
 	ret
 	CFI_ENDPROC
-ENDPROC(clear_page)
+ENDPROC(clear_page_c)
 
 ENTRY(clear_page)
 	CFI_STARTPROC
-- 
cgit v1.2.3


From 789d03f584484af85dbdc64935270c8e45f36ef7 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Tue, 30 Jun 2009 11:52:23 +0100
Subject: x86: Fix fixmap ordering

The merge of the 32- and 64-bit fixmap headers made a latent
bug on x86-64 a real one: with the right config settings
it is possible for FIX_OHCI1394_BASE to overlap the FIX_BTMAP_*
range.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: <stable@kernel.org> # for 2.6.30.x
LKML-Reference: <4A4A0A8702000078000082E8@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/fixmap.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 2d81af3974a..3eb0f79a532 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -114,9 +114,6 @@ enum fixed_addresses {
 	FIX_TEXT_POKE0,	/* reserve 2 pages for text_poke() */
 	FIX_TEXT_POKE1,
 	__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
-	FIX_OHCI1394_BASE,
-#endif
 	/*
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
@@ -129,6 +126,9 @@ enum fixed_addresses {
 	FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 256 -
 			(__end_of_permanent_fixed_addresses & 255),
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+	FIX_OHCI1394_BASE,
+#endif
 #ifdef CONFIG_X86_32
 	FIX_WP_TEST,
 #endif
-- 
cgit v1.2.3


From 944c54e7fc5ccf961bef2b5449958436b85de459 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 1 Jul 2009 00:10:16 +0200
Subject: ia64/PCI: adjust section annotation for pcibios_setup()

Should be __init.

Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/ia64/pci/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 729298f4b23..7de76dd352f 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -537,7 +537,7 @@ pcibios_align_resource (void *data, struct resource *res,
 /*
  * PCI BIOS setup, always defaults to SAL interface
  */
-char * __devinit
+char * __init
 pcibios_setup (char *str)
 {
 	return str;
-- 
cgit v1.2.3


From b01e8dc34379f4ba2f454390e340a025edbaaa7e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 30 Jun 2009 11:41:18 -0700
Subject: alpha: fix percpu build breakage

alpha percpu access requires custom SHIFT_PERCPU_PTR() definition for
modules to work around addressing range limitation.  This is done via
generating inline assembly using C preprocessing which forces the
assembler to generate external reference.  This happens behind the
compiler's back and makes the compiler think that static percpu variables
in modules are unused.

This used to be worked around by using __unused attribute for percpu
variables which prevent the compiler from omitting the variable; however,
recent declare/definition attribute unification change broke this as
__used can't be used for declaration.  Also, in the process,
PER_CPU_ATTRIBUTES definition in alpha percpu.h got broken.

This patch adds PER_CPU_DEF_ATTRIBUTES which is only used for definitions
and make alpha use it to add __used for percpu variables in modules.  This
also fixes the PER_CPU_ATTRIBUTES double definition bug.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: maximilian attems <max@stro.at>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/percpu.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a4afd..b663f1f10b6 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
+#define PER_CPU_DEF_ATTRIBUTES	__used
 
 #endif /* MODULE */
 
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 
 #endif /* SMP */
 
-- 
cgit v1.2.3


From 66918dcdf91ad101194c749c18099e836ba3de2b Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Tue, 30 Jun 2009 11:41:37 -0700
Subject: x86: only clear node_states for 64bit

Nathan reported that

| commit 73d60b7f747176dbdff826c4127d22e1fd3f9f74
| Author: Yinghai Lu <yinghai@kernel.org>
| Date:   Tue Jun 16 15:33:00 2009 -0700
|
|    page-allocator: clear N_HIGH_MEMORY map before we set it again
|
|    SRAT tables may contains nodes of very small size.  The arch code may
|    decide to not activate such a node.  However, currently the early boot
|    code sets N_HIGH_MEMORY for such nodes.  These nodes therefore seem to be
|    active although these nodes have no present pages.
|
|    For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too

unintentionally and incorrectly clears the cpuset.mems cgroup attribute on
an i386 kvm guest, meaning that cpuset.mems can not be used.

Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only.
and need to do save/restore for that in find_zone_movable_pfn

Reported-by: Nathan Lynch <ntl@pobox.com>
Tested-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/init_64.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c4378f4fd4a..b177652251a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,6 +598,8 @@ void __init paging_init(void)
 
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
+	/* clear the default setting with node 0 */
+	nodes_clear(node_states[N_NORMAL_MEMORY]);
 	free_area_init_nodes(max_zone_pfns);
 }
 
-- 
cgit v1.2.3


From aee3ff1b413cff44e7d91dd1901cacd8988ce9cf Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 30 Jun 2009 22:24:54 +0100
Subject: FRV: Wire up new syscalls

Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/include/asm/unistd.h | 4 +++-
 arch/frv/kernel/entry.S       | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 96d78d5d2c4..4a8fb427ce0 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -341,10 +341,12 @@
 #define __NR_inotify_init1	332
 #define __NR_preadv		333
 #define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_counter_open	336
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 335
+#define NR_syscalls 337
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 /* #define __ARCH_WANT_OLD_READDIR */
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index 356e0e327a8..fde1e446b44 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1524,5 +1524,7 @@ sys_call_table:
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev
+	.long sys_rt_tgsigqueueinfo	/* 335 */
+	.long sys_perf_counter_open
 
 syscall_table_size = (. - sys_call_table)
-- 
cgit v1.2.3


From 6086071005674eb982d898c75269c931240154cf Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 30 Jun 2009 22:33:15 +0100
Subject: MN10300: Wire up new syscalls

Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/include/asm/unistd.h | 4 +++-
 arch/mn10300/kernel/entry.S       | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fef5b434dad..fad68616af3 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -346,10 +346,12 @@
 #define __NR_inotify_init1	333
 #define __NR_preadv		334
 #define __NR_pwritev		335
+#define __NR_rt_tgsigqueueinfo	336
+#define __NR_perf_counter_open	337
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 326
+#define NR_syscalls 338
 
 /*
  * specify the deprecated syscalls we want to support on this arch
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 7408a27199f..e0d2563af4f 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -722,6 +722,8 @@ ENTRY(sys_call_table)
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 335 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
 
 nr_syscalls=(.-sys_call_table)/4
-- 
cgit v1.2.3


From 84f7597c116f811cfcb762e645fa258b7e585155 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 1 Jul 2009 04:55:35 +0000
Subject: sh: fix se7724 ceu names

Use "ceu0" and "ceu1" as CEU names instead of "ceu".
This fixes "memchunk" kernel command line selection
on the solution engine 7724 board.

With this patch applied use "memchunk.ceu0=1m" or
"memchunk.ceu1=1m" on kernel command line to override
physically memory size to one meg for CEU0 or CEU1.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 21d18005fb4..c050a8d76df 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -454,7 +454,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO0_CLK, NULL);
 	gpio_request(GPIO_FN_VIO0_FLD, NULL);
 	gpio_request(GPIO_FN_VIO0_HD,  NULL);
-	platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
 
 	/* enable CEU1 */
 	gpio_request(GPIO_FN_VIO1_D7,  NULL);
@@ -469,7 +469,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO1_HD,  NULL);
 	gpio_request(GPIO_FN_VIO1_VD,  NULL);
 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
-	platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
-- 
cgit v1.2.3


From 0802d9e55cc6be6bd1b13f9dc9ef5aa6d24bca77 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 1 Jul 2009 05:16:31 +0000
Subject: sh: re-add LCDC fbdev support to the Migo-R defconfig

Re-add LCDC fbdev support to the Migo-R defconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/migor_defconfig | 53 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 51 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index da627d22c00..b18cfd39cac 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -309,7 +309,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
 # Bus options
@@ -858,7 +858,35 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -870,6 +898,27 @@ CONFIG_VIDEO_SH_MOBILE_CEU=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-- 
cgit v1.2.3


From 0a456fc58fb8ef3c53d18297ab5cd5d2a70d146b Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Wed, 1 Jul 2009 13:07:01 +1000
Subject: powerpc/perf_counter: Enable alternate PR/HV bits for POWER7

POWER7 has the same PR/HV bit layout as POWER6, so set the flag.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: a.p.zijlstra@chello.nl
Cc: benh@kernel.crashing.org
LKML-Reference: <20090701030701.GI3563@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/kernel/power7-pmu.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 5d755ef7ac8..5a9f5cbd40a 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -358,6 +358,7 @@ static struct power_pmu power7_pmu = {
 	.get_constraint		= power7_get_constraint,
 	.get_alternatives	= power7_get_alternatives,
 	.disable_pmc		= power7_disable_pmc,
+	.flags			= PPMU_ALT_SIPR,
 	.n_generic		= ARRAY_SIZE(power7_generic_events),
 	.generic_events		= power7_generic_events,
 	.cache_events		= &power7_cache_events,
-- 
cgit v1.2.3


From 44973998a111dfda09b952aa0f27cad326a97793 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 1 Jul 2009 17:49:38 +0530
Subject: x86: Remove double declaration of MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1

MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1 is already declared in msr-index.h.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1246450778.6940.8.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/msr-index.h | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5050e..6be7fc254b5 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -246,10 +246,6 @@
 #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE	(1ULL << 38)
 #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE	(1ULL << 39)
 
-/* Intel Model 6 */
-#define MSR_P6_EVNTSEL0			0x00000186
-#define MSR_P6_EVNTSEL1			0x00000187
-
 /* P4/Xeon+ specific */
 #define MSR_IA32_MCG_EAX		0x00000180
 #define MSR_IA32_MCG_EBX		0x00000181
-- 
cgit v1.2.3


From b25ae679f613ed04aaf6ccbfdb9122fce668e4bb Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 1 Jul 2009 19:53:14 +0530
Subject: x86: Mark device_nb as static and fix NULL noise

This sparse warning:

  arch/x86/kernel/amd_iommu.c:1195:23: warning: symbol 'device_nb' was not declared. Should it be static?

triggers because device_nb is global but is only used in a
single .c file. change device_nb to static to fix that - this
also addresses the sparse warning.

This sparse warning:

  arch/x86/kernel/amd_iommu.c:1766:10: warning: Using plain integer as NULL pointer

triggers because plain integer 0 is used in place of a NULL
pointer. change 0 to NULL to fix that - this also address the
sparse warning.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <1246458194.6940.20.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/amd_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9372f0406ad..6c99f503780 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1192,7 +1192,7 @@ out:
 	return 0;
 }
 
-struct notifier_block device_nb = {
+static struct notifier_block device_nb = {
 	.notifier_call = device_change_notifier,
 };
 
@@ -1763,7 +1763,7 @@ static void *alloc_coherent(struct device *dev, size_t size,
 	flag |= __GFP_ZERO;
 	virt_addr = (void *)__get_free_pages(flag, get_order(size));
 	if (!virt_addr)
-		return 0;
+		return NULL;
 
 	paddr = virt_to_phys(virt_addr);
 
-- 
cgit v1.2.3


From 76c06927f2a78143763dcff9b4c362d15eb29cc2 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 1 Jul 2009 19:54:23 +0530
Subject: x86: Declare check_efer() before it gets used

This sparse warning:

  arch/x86/mm/init.c:83:16: warning: symbol 'check_efer' was not declared. Should it be static?

triggers because check_efer() is not decalared before using it.
asm/proto.h includes the declaration of check_efer(), so
including asm/proto.h to fix that - this also addresses the
sparse warning.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <1246458263.6940.22.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 47ce9a2ce5e..0607119cef9 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -12,6 +12,7 @@
 #include <asm/system.h>
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
+#include <asm/proto.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-- 
cgit v1.2.3


From 3238c0c4d68d9a9022b411a11a4b933fbdb53a14 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Wed, 1 Jul 2009 18:56:16 +0100
Subject: intel-iommu: Make iommu=pt work on i386 too

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/x86/kernel/pci-dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 47630479b06..1a041bcf506 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -211,11 +211,11 @@ static __init int iommu_setup(char *p)
 #ifdef CONFIG_SWIOTLB
 		if (!strncmp(p, "soft", 4))
 			swiotlb = 1;
+#endif
 		if (!strncmp(p, "pt", 2)) {
 			iommu_pass_through = 1;
 			return 1;
 		}
-#endif
 
 		gart_parse_options(p);
 
-- 
cgit v1.2.3


From 788d84bba47ea3eb377f7a3ae4fd1ee84b84877b Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Wed, 1 Jul 2009 18:34:52 +0100
Subject: Fix pci_unmap_addr() et al on i386.

We can run a 32-bit kernel on boxes with an IOMMU, so we need
pci_unmap_addr() etc. to work -- without it, drivers will leak mappings.

To be honest, this whole thing looks like it's more pain than it's
worth; I'm half inclined to remove the no-op #else case altogether.

But this is the minimal fix, which just does the right thing if
CONFIG_DMAR is set.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org  [ for 2.6.30 ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/pci.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 927958d13c1..1ff685ca221 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void);
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
 
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
 	        dma_addr_t ADDR_NAME;
-- 
cgit v1.2.3


From 34e19ada994fb9cb3d11873f2b734602e2135f3a Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Wed, 1 Jul 2009 18:14:18 +0000
Subject: sh: Fix compiler error and include the definition of IS_ERR_VALUE

When arch/sh/include/asm/syscall_32.h is included from a file that
doesn't also include linux/err.h the following error is produced,

In file included from /home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall.h:5,
                 from kernel/trace/trace_syscalls.c:3:
/home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall_32.h: In function 'syscall_get_error':
/home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall_32.h:28: error: implicit declaration of function 'IS_ERR_VALUE'
make[2]: *** [kernel/trace/trace_syscalls.o] Error 1
make[1]: *** [kernel/trace] Error 2
make: *** [kernel] Error 2

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/syscall_32.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 5bc34681d99..6f83f2cc45c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -3,6 +3,7 @@
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/err.h>
 #include <asm/ptrace.h>
 
 /* The system call number is given by the user in R3 */
-- 
cgit v1.2.3


From a4a874a906ae69c35df4b712fadbc35b15665355 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Thu, 18 Jun 2009 07:05:46 +0800
Subject: kmemcheck: remove duplicated #include

Remove duplicated #include in arch/x86/mm/kmemcheck/shadow.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
---
 arch/x86/mm/kmemcheck/shadow.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/kmemcheck/shadow.c b/arch/x86/mm/kmemcheck/shadow.c
index e773b6bd007..3f66b82076a 100644
--- a/arch/x86/mm/kmemcheck/shadow.c
+++ b/arch/x86/mm/kmemcheck/shadow.c
@@ -1,7 +1,6 @@
 #include <linux/kmemcheck.h>
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 414f3251aa1b4cbd1e070866971eabc004a7dc20 Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Mon, 22 Jun 2009 14:31:53 +0200
Subject: kmemcheck: remove useless check

This check is a left-over from ancient times. We now have the equivalent
check much earlier in both the page fault handler and the debug trap
handler (the calls to kmemcheck_active()).

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
---
 arch/x86/mm/kmemcheck/kmemcheck.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
index 2c55ed09865..5b99004fb4b 100644
--- a/arch/x86/mm/kmemcheck/kmemcheck.c
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -225,9 +225,6 @@ void kmemcheck_hide(struct pt_regs *regs)
 
 	BUG_ON(!irqs_disabled());
 
-	if (data->balance == 0)
-		return;
-
 	if (unlikely(data->balance != 1)) {
 		kmemcheck_show_all();
 		kmemcheck_error_save_bug(regs);
-- 
cgit v1.2.3


From 0406ca6d8e849d9dd027c8cb6791448e81411aef Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Wed, 1 Jul 2009 21:02:09 +0200
Subject: perf_counter: Ignore the nmi call frames in the x86-64 backtraces

About every callchains recorded with perf record are filled up
including the internal perfcounter nmi frame:

 perf_callchain
 perf_counter_overflow
 intel_pmu_handle_irq
 perf_counter_nmi_handler
 notifier_call_chain
 atomic_notifier_call_chain
 notify_die
 do_nmi
 nmi

We want ignore this frame as it's not interesting for
instrumentation. To solve this, we simply ignore every frames
from nmi context.

New example of "perf report -s sym -c" after this patch:

9.59%  [k] search_by_key
             4.88%
                search_by_key
                reiserfs_read_locked_inode
                reiserfs_iget
                reiserfs_lookup
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                vfs_fstatat
                vfs_lstat
                sys_newlstat
                system_call_fastpath
                __lxstat
                0x406fb1

             3.19%
                search_by_key
                search_by_entry_key
                reiserfs_find_entry
                reiserfs_lookup
                do_lookup
                __link_path_walk
                path_walk
                do_path_lookup
                user_path_at
                vfs_fstatat
                vfs_lstat
                sys_newlstat
                system_call_fastpath
                __lxstat
                0x406fb1
[...]

For now this patch only solves the problem in x86-64.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1246474930-6088-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/stacktrace.h  |  2 ++
 arch/x86/kernel/cpu/perf_counter.c |  8 +++++++-
 arch/x86/kernel/dumpstack_32.c     |  6 ++++++
 arch/x86/kernel/dumpstack_64.c     | 22 +++++++++++++++-------
 4 files changed, 30 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index f517944b2b1..cf86a5e7381 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -3,6 +3,8 @@
 
 extern int kstack_depth_to_print;
 
+int x86_is_stack_id(int id, char *name);
+
 /* Generic stack tracer with callbacks */
 
 struct stacktrace_ops {
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index d4cf4ce19aa..36c3dc7b899 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -1561,6 +1561,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 
 static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
 static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
 
 
 static void
@@ -1576,7 +1577,9 @@ static void backtrace_warning(void *data, char *msg)
 
 static int backtrace_stack(void *data, char *name)
 {
-	/* Process all stacks: */
+	per_cpu(in_nmi_frame, smp_processor_id()) =
+			x86_is_stack_id(NMI_STACK, name);
+
 	return 0;
 }
 
@@ -1584,6 +1587,9 @@ static void backtrace_address(void *data, unsigned long addr, int reliable)
 {
 	struct perf_callchain_entry *entry = data;
 
+	if (per_cpu(in_nmi_frame, smp_processor_id()))
+		return;
+
 	if (reliable)
 		callchain_store(entry, addr);
 }
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index d593cd1f58d..bca5fba91c9 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -19,6 +19,12 @@
 
 #include "dumpstack.h"
 
+/* Just a stub for now */
+int x86_is_stack_id(int id, char *name)
+{
+	return 0;
+}
+
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index d35db5993fd..54b0a327676 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -19,10 +19,8 @@
 
 #include "dumpstack.h"
 
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					unsigned *usedp, char **idp)
-{
-	static char ids[][8] = {
+
+static char x86_stack_ids[][8] = {
 		[DEBUG_STACK - 1] = "#DB",
 		[NMI_STACK - 1] = "NMI",
 		[DOUBLEFAULT_STACK - 1] = "#DF",
@@ -33,6 +31,15 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 			N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
 #endif
 	};
+
+int x86_is_stack_id(int id, char *name)
+{
+	return x86_stack_ids[id - 1] == name;
+}
+
+static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
+					unsigned *usedp, char **idp)
+{
 	unsigned k;
 
 	/*
@@ -61,7 +68,7 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 			if (*usedp & (1U << k))
 				break;
 			*usedp |= 1U << k;
-			*idp = ids[k];
+			*idp = x86_stack_ids[k];
 			return (unsigned long *)end;
 		}
 		/*
@@ -81,12 +88,13 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
 			do {
 				++j;
 				end -= EXCEPTION_STKSZ;
-				ids[j][4] = '1' + (j - N_EXCEPTION_STACKS);
+				x86_stack_ids[j][4] = '1' +
+						(j - N_EXCEPTION_STACKS);
 			} while (stack < end - EXCEPTION_STKSZ);
 			if (*usedp & (1U << j))
 				break;
 			*usedp |= 1U << j;
-			*idp = ids[j];
+			*idp = x86_stack_ids[j];
 			return (unsigned long *)end;
 		}
 #endif
-- 
cgit v1.2.3


From 00460f41fffc0435dbb6ab4b058a190163d57ce6 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 2 Jul 2009 00:46:16 +0100
Subject: FRV: Implement atomic64_t

Implement atomic64_t and its ops for FRV.  Tested with the following patch:

	diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
	index 55e4fab..086d50d 100644
	--- a/arch/frv/kernel/setup.c
	+++ b/arch/frv/kernel/setup.c
	@@ -746,6 +746,52 @@ static void __init parse_cmdline_early(char *cmdline)

	 } /* end parse_cmdline_early() */

	+static atomic64_t xxx;
	+
	+static void test_atomic64(void)
	+{
	+	atomic64_set(&xxx, 0x12300000023LL);
	+
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x12300000023LL);
	+	mb();
	+	if (atomic64_inc_return(&xxx) != 0x12300000024LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x12300000024LL);
	+	mb();
	+	if (atomic64_sub_return(0x36900000050LL, &xxx) != -0x2460000002cLL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != -0x2460000002cLL);
	+	mb();
	+	if (atomic64_dec_return(&xxx) != -0x2460000002dLL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != -0x2460000002dLL);
	+	mb();
	+	if (atomic64_add_return(0x36800000001LL, &xxx) != 0x121ffffffd4LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x121ffffffd4LL);
	+	mb();
	+	if (atomic64_cmpxchg(&xxx, 0x123456789abcdefLL, 0x121ffffffd4LL) != 0x121ffffffd4LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x121ffffffd4LL);
	+	mb();
	+	if (atomic64_cmpxchg(&xxx, 0x121ffffffd4LL, 0x123456789abcdefLL) != 0x121ffffffd4LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x123456789abcdefLL);
	+	mb();
	+	if (atomic64_xchg(&xxx, 0xabcdef123456789LL) != 0x123456789abcdefLL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0xabcdef123456789LL);
	+	mb();
	+}
	+
	 /*****************************************************************************/
	 /*
	  *
	@@ -845,6 +891,8 @@ void __init setup_arch(char **cmdline_p)
	 //	asm volatile("movgs %0,timerd" :: "r"(10000000));
	 //	__set_HSR(0, __get_HSR(0) | HSR0_ETMD);

	+	test_atomic64();
	+
	 } /* end setup_arch() */

	 #if 0

Note that this doesn't cover all the trivial wrappers, but does cover all the
substantial implementations.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/include/asm/atomic.h |  68 +++++++++++++++++-
 arch/frv/include/asm/system.h |   2 +
 arch/frv/kernel/frv_ksyms.c   |   4 ++
 arch/frv/lib/Makefile         |   2 +-
 arch/frv/lib/atomic-ops.S     |   3 +-
 arch/frv/lib/atomic64-ops.S   | 162 ++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 236 insertions(+), 5 deletions(-)
 create mode 100644 arch/frv/lib/atomic64-ops.S

(limited to 'arch')

diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h
index 0409d981fd3..00a57af79af 100644
--- a/arch/frv/include/asm/atomic.h
+++ b/arch/frv/include/asm/atomic.h
@@ -121,10 +121,72 @@ static inline void atomic_dec(atomic_t *v)
 #define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
 #define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
 
+/*
+ * 64-bit atomic ops
+ */
+typedef struct {
+	volatile long long counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static inline long long atomic64_read(atomic64_t *v)
+{
+	long long counter;
+
+	asm("ldd%I1 %M1,%0"
+	    : "=e"(counter)
+	    : "m"(v->counter));
+	return counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	asm volatile("std%I0 %1,%M0"
+		     : "=m"(v->counter)
+		     : "e"(i));
+}
+
+extern long long atomic64_inc_return(atomic64_t *v);
+extern long long atomic64_dec_return(atomic64_t *v);
+extern long long atomic64_add_return(long long i, atomic64_t *v);
+extern long long atomic64_sub_return(long long i, atomic64_t *v);
+
+static inline long long atomic64_add_negative(long long i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+static inline void atomic64_add(long long i, atomic64_t *v)
+{
+	atomic64_add_return(i, v);
+}
+
+static inline void atomic64_sub(long long i, atomic64_t *v)
+{
+	atomic64_sub_return(i, v);
+}
+
+static inline void atomic64_inc(atomic64_t *v)
+{
+	atomic64_inc_return(v);
+}
+
+static inline void atomic64_dec(atomic64_t *v)
+{
+	atomic64_dec_return(v);
+}
+
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_inc_return((v)) == 0)
+
 /*****************************************************************************/
 /*
  * exchange value with memory
  */
+extern uint64_t __xchg_64(uint64_t i, volatile void *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define xchg(ptr, x)								\
@@ -174,8 +236,10 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v);
 
 #define tas(ptr) (xchg((ptr), 1))
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&(v)->counter, old, new))
+#define atomic_xchg(v, new)		(xchg(&(v)->counter, new))
+#define atomic64_cmpxchg(v, old, new)	(__cmpxchg_64(old, new, &(v)->counter))
+#define atomic64_xchg(v, new)		(__xchg_64(new, &(v)->counter))
 
 static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 {
diff --git a/arch/frv/include/asm/system.h b/arch/frv/include/asm/system.h
index 7742ec000cc..efd22d9077a 100644
--- a/arch/frv/include/asm/system.h
+++ b/arch/frv/include/asm/system.h
@@ -208,6 +208,8 @@ extern void free_initmem(void);
  * - if (*ptr == test) then orig = *ptr; *ptr = test;
  * - if (*ptr != test) then orig = *ptr;
  */
+extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v);
+
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
 
 #define cmpxchg(ptr, test, new)							\
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index 0316b3c50ef..a89803b58b9 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -67,6 +67,10 @@ EXPORT_SYMBOL(atomic_sub_return);
 EXPORT_SYMBOL(__xchg_32);
 EXPORT_SYMBOL(__cmpxchg_32);
 #endif
+EXPORT_SYMBOL(atomic64_add_return);
+EXPORT_SYMBOL(atomic64_sub_return);
+EXPORT_SYMBOL(__xchg_64);
+EXPORT_SYMBOL(__cmpxchg_64);
 
 EXPORT_SYMBOL(__debug_bug_printk);
 EXPORT_SYMBOL(__delay_loops_MHz);
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 08be305c9f4..4ff2fb1e6b1 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -4,5 +4,5 @@
 
 lib-y := \
 	__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
-	checksum.o memcpy.o memset.o atomic-ops.o \
+	checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
 	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S
index ee0ac905fb0..5e9e6ab5dd0 100644
--- a/arch/frv/lib/atomic-ops.S
+++ b/arch/frv/lib/atomic-ops.S
@@ -163,11 +163,10 @@ __cmpxchg_32:
 	ld.p		@(gr11,gr0),gr8
 	orcr		cc7,cc7,cc3
 	subcc		gr8,gr9,gr7,icc0
-	bne		icc0,#0,1f
+	bnelr		icc0,#0
 	cst.p		gr10,@(gr11,gr0)	,cc3,#1
 	corcc		gr29,gr29,gr0		,cc3,#1
 	beq		icc3,#0,0b
-1:
 	bralr
 
 	.size		__cmpxchg_32, .-__cmpxchg_32
diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S
new file mode 100644
index 00000000000..b6194eeac12
--- /dev/null
+++ b/arch/frv/lib/atomic64-ops.S
@@ -0,0 +1,162 @@
+/* kernel atomic64 operations
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ *   Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/spr-regs.h>
+
+	.text
+	.balign 4
+
+
+###############################################################################
+#
+# long long atomic64_inc_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_inc_return
+        .type		atomic64_inc_return,@function
+atomic64_inc_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addicc		gr9,#1,gr9,icc0
+	addxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_inc_return, .-atomic64_inc_return
+
+###############################################################################
+#
+# long long atomic64_dec_return(atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_dec_return
+        .type		atomic64_dec_return,@function
+atomic64_dec_return:
+	or.p		gr8,gr8,gr10
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subicc		gr9,#1,gr9,icc0
+	subxi		gr8,#0,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_dec_return, .-atomic64_dec_return
+
+###############################################################################
+#
+# long long atomic64_add_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_add_return
+        .type		atomic64_add_return,@function
+atomic64_add_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	addcc		gr9,gr5,gr9,icc0
+	addx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_add_return, .-atomic64_add_return
+
+###############################################################################
+#
+# long long atomic64_sub_return(long long i, atomic64_t *v)
+#
+###############################################################################
+	.globl		atomic64_sub_return
+        .type		atomic64_sub_return,@function
+atomic64_sub_return:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	subcc		gr9,gr5,gr9,icc0
+	subx		gr8,gr4,gr8,icc0
+	cstd.p		gr8,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		atomic64_sub_return, .-atomic64_sub_return
+
+###############################################################################
+#
+# uint64_t __xchg_64(uint64_t i, uint64_t *v)
+#
+###############################################################################
+	.globl		__xchg_64
+        .type		__xchg_64,@function
+__xchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr10,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3			/* set CC3 to true */
+	cstd.p		gr4,@(gr10,gr0)		,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__xchg_64, .-__xchg_64
+
+###############################################################################
+#
+# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v)
+#
+###############################################################################
+	.globl		__cmpxchg_64
+        .type		__cmpxchg_64,@function
+__cmpxchg_64:
+	or.p		gr8,gr8,gr4
+	or		gr9,gr9,gr5
+0:
+	orcc		gr0,gr0,gr0,icc3		/* set ICC3.Z */
+	ckeq		icc3,cc7
+	ldd.p		@(gr12,gr0),gr8			/* LDD.P/ORCR must be atomic */
+	orcr		cc7,cc7,cc3
+	subcc		gr8,gr4,gr0,icc0
+	subcc.p		gr9,gr5,gr0,icc1
+	bnelr		icc0,#0
+	bnelr		icc1,#0
+	cstd.p		gr10,@(gr12,gr0)	,cc3,#1
+	corcc		gr29,gr29,gr0		,cc3,#1	/* clear ICC3.Z if store happens */
+	beq		icc3,#0,0b
+	bralr
+
+	.size		__cmpxchg_64, .-__cmpxchg_64
+
-- 
cgit v1.2.3


From 42ca4fb69126dd9d0e25112edca1cacf846aa5c3 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 2 Jul 2009 00:46:21 +0100
Subject: FRV: Add basic performance counter support

Add basic performance counter support to the FRV arch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/Kconfig                    |  1 +
 arch/frv/include/asm/perf_counter.h | 17 +++++++++++++++++
 arch/frv/lib/Makefile               |  2 +-
 arch/frv/lib/perf_counter.c         | 19 +++++++++++++++++++
 4 files changed, 38 insertions(+), 1 deletion(-)
 create mode 100644 arch/frv/include/asm/perf_counter.h
 create mode 100644 arch/frv/lib/perf_counter.c

(limited to 'arch')

diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 8a5bd7a9c6f..b86e19c9b5b 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,6 +7,7 @@ config FRV
 	default y
 	select HAVE_IDE
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_PERF_COUNTERS
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
new file mode 100644
index 00000000000..ccf726e61b2
--- /dev/null
+++ b/arch/frv/include/asm/perf_counter.h
@@ -0,0 +1,17 @@
+/* FRV performance counter support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_COUNTER_H
+#define _ASM_PERF_COUNTER_H
+
+#define PERF_COUNTER_INDEX_OFFSET	0
+
+#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 4ff2fb1e6b1..0a377210c89 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -5,4 +5,4 @@
 lib-y := \
 	__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
 	checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
-	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o
+	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
new file mode 100644
index 00000000000..2000feecd57
--- /dev/null
+++ b/arch/frv/lib/perf_counter.c
@@ -0,0 +1,19 @@
+/* Performance counter handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_counter.h>
+
+/*
+ * mark the performance counter as pending
+ */
+void set_perf_counter_pending(void)
+{
+}
-- 
cgit v1.2.3


From 251e1e44b97852aa5e53e71c4b47e55b2dfd054e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 2 Jul 2009 08:54:01 +0200
Subject: x86: Fix printk call in print_local_apic()

Instead of this:

[   75.690022] <7>printing local APIC contents on CPU#0/0:
[   75.704406] ... APIC ID:      00000000 (0)
[   75.707905] ... APIC VERSION: 00060015
[   75.722551] ... APIC TASKPRI: 00000000 (00)
[   75.725473] ... APIC PROCPRI: 00000000
[   75.728592] ... APIC LDR: 00000001
[   75.742137] ... APIC SPIV: 000001ff
[   75.744101] ... APIC ISR field:
[   75.746648] 0123456789abcdef0123456789abcdef
[   75.746649] <7>00000000000000000000000000000000

Improve the code to be saner and simpler and just print out
the bitfield in a single line using hexa values - not as a
(rather pointless) binary bitfield.

Partially reused Linus's initial fix for this.

Reported-and-Tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A4C43BC.90506@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 31 +++++++++++++------------------
 1 file changed, 13 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 4d0216fcb36..8fd1efb5a0b 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1716,25 +1716,19 @@ __apicdebuginit(void) print_IO_APIC(void)
 	return;
 }
 
-__apicdebuginit(void) print_APIC_bitfield(int base)
+__apicdebuginit(void) print_APIC_field(int base)
 {
-	unsigned int v;
-	int i, j;
+	int i;
 
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
-	for (i = 0; i < 8; i++) {
-		v = apic_read(base + i*0x10);
-		for (j = 0; j < 32; j++) {
-			if (v & (1<<j))
-				printk("1");
-			else
-				printk("0");
-		}
-		printk("\n");
-	}
+	printk(KERN_DEBUG);
+
+	for (i = 0; i < 8; i++)
+		printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+
+	printk(KERN_CONT "\n");
 }
 
 __apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1745,7 +1739,8 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
+	printk(KERN_DEBUG "\n");
+	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
 	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, read_apic_id());
@@ -1786,11 +1781,11 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
 
 	printk(KERN_DEBUG "... APIC ISR field:\n");
-	print_APIC_bitfield(APIC_ISR);
+	print_APIC_field(APIC_ISR);
 	printk(KERN_DEBUG "... APIC TMR field:\n");
-	print_APIC_bitfield(APIC_TMR);
+	print_APIC_field(APIC_TMR);
 	printk(KERN_DEBUG "... APIC IRR field:\n");
-	print_APIC_bitfield(APIC_IRR);
+	print_APIC_field(APIC_IRR);
 
 	if (APIC_INTEGRATED(ver)) {             /* !82489DX */
 		if (maxlvt > 3)         /* Due to the Pentium erratum 3AP. */
-- 
cgit v1.2.3


From 7a6a3a086fe60bb3b739f66e47dc5bbc8f530d32 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 2 Jul 2009 12:23:23 +0200
Subject: amd-iommu: handle alias entries correctly in init code

An alias entry in the ACPI table means that the device can send requests to the
IOMMU with both device ids, its own and the alias. This is not handled properly
in the ACPI init code. This patch fixes the issue.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu_init.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 10b2accd12e..ec72c7779d6 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -691,6 +691,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 
 			devid = e->devid;
 			devid_to = e->ext >> 8;
+			set_dev_entry_from_acpi(iommu, devid   , e->flags, 0);
 			set_dev_entry_from_acpi(iommu, devid_to, e->flags, 0);
 			amd_iommu_alias_table[devid] = devid_to;
 			break;
@@ -749,11 +750,13 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 
 			devid = e->devid;
 			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
-				if (alias)
+				if (alias) {
 					amd_iommu_alias_table[dev_i] = devid_to;
-				set_dev_entry_from_acpi(iommu,
-						amd_iommu_alias_table[dev_i],
-						flags, ext_flags);
+					set_dev_entry_from_acpi(iommu,
+						devid_to, flags, ext_flags);
+				}
+				set_dev_entry_from_acpi(iommu, dev_i,
+							flags, ext_flags);
 			}
 			break;
 		default:
-- 
cgit v1.2.3


From eab4170865cce9b8898a813b7e8024de857a01da Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:00 +0100
Subject: [ARM] 5567/1: at91: Support for at91sam9g10: clocks management

From: Hong Xu <hong.xu@atmel.com>

Add the at91sam9g10 support to the AT91 generic clock file. It takes
advantage of the management by functionalities of those PLLs and clocks.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6396680271e..c042dcf4725 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -53,7 +53,7 @@
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
 				|| cpu_is_at91sam9g45())
 
-#define cpu_has_300M_plla()	(0)
+#define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45()))
@@ -626,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
-- 
cgit v1.2.3


From b784b7c03723891876c9053c589150a4062f9455 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:59 +0100
Subject: [ARM] 5568/1: at91: Basic support for at91sam9g10: header files

From: Hong Xu <hong.xu@atmel.com>

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Here is the basic header file support for this product.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9261.h | 3 +++
 arch/arm/mach-at91/include/mach/cpu.h         | 7 +++++++
 arch/arm/mach-at91/include/mach/hardware.h    | 2 +-
 arch/arm/mach-at91/include/mach/timex.h       | 5 +++++
 4 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca2077..87de8be1748 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
 #define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
 #define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
 
+#define AT91SAM9G10_SRAM_BASE	AT91SAM9261_SRAM_BASE	/* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE	0x00004000	/* Internal SRAM size (16Kb) */
+
 #define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
 #define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index b73e7bf097d..34a9502c48b 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,6 +21,7 @@
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G10	0x819903a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
@@ -97,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91SAM9263
 #define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
 #else
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f0869170fa0..a0df8b022df 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,7 +20,7 @@
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 38f6c4250c7..31ac2d97f14 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK	133000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 
 #if defined(CONFIG_MACH_USB_A9263)
-- 
cgit v1.2.3


From b319ff80852e823c3a18778c839151784990f80b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:01 +0100
Subject: [ARM] 5570/1: at91: Support for at91sam9g10: core chip & board
 support

From: Hong Xu <hong.xu@atmel.com>

Here are the modification to at91sam9261 files dedicated to the support of
at91sam9g10. This direction has been adopted to minimize code duplication.

All at91sam9261 drivers are enabled in _devices and board- files. Modificaton
to peripherals that support at91sam9g10 will be added in future patches.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig           | 25 +++++++++++++++++++++++--
 arch/arm/mach-at91/Makefile          |  2 ++
 arch/arm/mach-at91/at91sam9261.c     | 22 +++++++++++++++++++++-
 arch/arm/mach-at91/board-sam9261ek.c | 14 ++++++++++++++
 arch/arm/mach-at91/pm.c              |  3 ++-
 5 files changed, 62 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 22309ba97fa..8f3e15abdb6 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
@@ -230,6 +236,21 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9G10
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91SAM9263
 
 comment "AT91SAM9263 Board Type"
@@ -337,13 +358,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 2975f9ab861..4eaf80abe10 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7e6a4..4ecf37996c7 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <mach/cpu.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	},
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
 		.length		= AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 	},
 };
 
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+	{
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+		.length		= AT91SAM9G10_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
 
+	if (cpu_is_at91sam9g10())
+		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+	else
+		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
 	at91_arch_reset = at91sam9261_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da5531..f9b19993a7a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 	.shortname	= "AT91SAM9261-EK external DAC",
+#else
+	.shortname	= "AT91SAM9G10-EK external DAC",
+#endif
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 
 #else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 #endif
 
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe61fa..4028724d490 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
-- 
cgit v1.2.3


From 9be4b17c4c900f634ab9be3d13e116aa31edb7cb Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Wed, 1 Jul 2009 23:41:12 +0100
Subject: [ARM] 5579/1: Updated U300 defconfig

This defconfig update selects all the new U300 drivers merged for
2.6.31-rc1 in the merge window and add defaults for the new
config options. It compiles and boots nicely from initramfs on
the U300.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/u300_defconfig | 92 ++++++++++++++++++++++++-----------------
 1 file changed, 53 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 2d827e12114..4762d900129 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun  1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc1
+# Thu Jul  2 00:16:59 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,7 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +18,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +79,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -94,6 +97,10 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -106,7 +113,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,9 +145,9 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -216,8 +223,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -243,7 +250,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -258,17 +264,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +505,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -538,6 +547,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
 
 #
 # External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
 
 #
 # SPI Protocol Masters
@@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -760,6 +761,11 @@ CONFIG_SND_JACK=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -887,7 +894,10 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -900,16 +910,20 @@ CONFIG_REGULATOR=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1033,6 +1047,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1078,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1109,6 +1122,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 4ebfc3dba59fb84b315ebb0059347dc9342a32f1 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 2 Jul 2009 00:27:57 +0100
Subject: [ARM] 5581/1: U300 clock updates

This adds a few default locks to the clocks (the clocks were used
before the locks were initialized by code), then renames the clocks
a bit to fit with the latest driver names (some changed during
review). Lastly it moves the initialization of the clock debugfs
entry to module_init() initcall level since the debugfs isn't up
in core_initcall().

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/clock.c | 121 ++++++++++++++++++++++++++++++---------------
 1 file changed, 80 insertions(+), 41 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5cd04d6751b..111f7ea32b3 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/seq_file.h>
 
 #include <asm/clkdev.h>
 #include <mach/hardware.h>
@@ -702,6 +703,7 @@ static struct clk amba_clk = {
 	.rate	    = 52000000, /* this varies! */
 	.hw_ctrld   = true,
 	.reset	    = false,
+	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
 };
 
 /*
@@ -720,6 +722,7 @@ static struct clk cpu_clk = {
 	.set_rate   = clk_set_rate_cpuclk,
 	.get_rate   = clk_get_rate_cpuclk,
 	.round_rate = clk_round_rate_cpuclk,
+	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
 };
 
 static struct clk nandif_clk = {
@@ -732,6 +735,7 @@ static struct clk nandif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
 };
 
 static struct clk semi_clk = {
@@ -744,6 +748,7 @@ static struct clk semi_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -758,6 +763,7 @@ static struct clk isp_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
 };
 
 static struct clk cds_clk = {
@@ -771,6 +777,7 @@ static struct clk cds_clk = {
 	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
 };
 #endif
 
@@ -785,6 +792,7 @@ static struct clk dma_clk = {
 	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
 };
 
 static struct clk aaif_clk = {
@@ -798,6 +806,7 @@ static struct clk aaif_clk = {
 	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
 };
 
 static struct clk apex_clk = {
@@ -811,6 +820,7 @@ static struct clk apex_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
 };
 
 static struct clk video_enc_clk = {
@@ -825,6 +835,7 @@ static struct clk video_enc_clk = {
 	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
 };
 
 static struct clk xgam_clk = {
@@ -839,6 +850,7 @@ static struct clk xgam_clk = {
 	.get_rate   = clk_get_rate_xgamclk,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
 };
 
 /* This clock is used to activate the video encoder */
@@ -854,6 +866,7 @@ static struct clk ahb_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
 };
 
 
@@ -871,6 +884,7 @@ static struct clk ahb_subsys_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_ahb_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
 };
 
 static struct clk intcon_clk = {
@@ -882,6 +896,8 @@ static struct clk intcon_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
 	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
 	/* INTCON can be reset but not clock-gated */
+	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
+
 };
 
 static struct clk mspro_clk = {
@@ -895,6 +911,7 @@ static struct clk mspro_clk = {
 	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
 };
 
 static struct clk emif_clk = {
@@ -909,6 +926,7 @@ static struct clk emif_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_emif_clk,
+	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
 };
 
 
@@ -926,6 +944,7 @@ static struct clk fast_clk = {
 	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 };
 
 static struct clk mmcsd_clk = {
@@ -942,6 +961,7 @@ static struct clk mmcsd_clk = {
 	.round_rate = clk_round_rate_mclk,
 	.disable    = syscon_clk_disable,
 	.enable     = syscon_clk_enable,
+	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
 };
 
 static struct clk i2s0_clk = {
@@ -956,6 +976,7 @@ static struct clk i2s0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
 };
 
 static struct clk i2s1_clk = {
@@ -970,6 +991,7 @@ static struct clk i2s1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
 };
 
 static struct clk i2c0_clk = {
@@ -984,6 +1006,7 @@ static struct clk i2c0_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
 };
 
 static struct clk i2c1_clk = {
@@ -998,6 +1021,7 @@ static struct clk i2c1_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
 };
 
 static struct clk spi_clk = {
@@ -1012,6 +1036,7 @@ static struct clk spi_clk = {
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
 	.get_rate   = clk_get_rate_i2s_i2c_spi,
+	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1026,6 +1051,7 @@ static struct clk uart1_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
 };
 #endif
 
@@ -1044,6 +1070,7 @@ static struct clk slow_clk = {
 	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
 };
 
 /* TODO: implement SYSCON clock? */
@@ -1055,6 +1082,7 @@ static struct clk wdog_clk = {
 	.rate	    = 32768,
 	.reset	    = false,
 	/* This is always on, cannot be enabled/disabled or reset */
+	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
 };
 
 /* This one is hardwired to PLL13 */
@@ -1069,6 +1097,7 @@ static struct clk uart_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
 };
 
 static struct clk keypad_clk = {
@@ -1082,6 +1111,7 @@ static struct clk keypad_clk = {
 	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
 };
 
 static struct clk gpio_clk = {
@@ -1095,6 +1125,7 @@ static struct clk gpio_clk = {
 	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
 };
 
 static struct clk rtc_clk = {
@@ -1106,6 +1137,7 @@ static struct clk rtc_clk = {
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
 	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
 	/* This clock is always on, cannot be enabled/disabled */
+	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
 };
 
 static struct clk bustr_clk = {
@@ -1119,6 +1151,7 @@ static struct clk bustr_clk = {
 	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
 };
 
 static struct clk evhist_clk = {
@@ -1132,6 +1165,7 @@ static struct clk evhist_clk = {
 	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
 };
 
 static struct clk timer_clk = {
@@ -1145,6 +1179,7 @@ static struct clk timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
 };
 
 static struct clk app_timer_clk = {
@@ -1158,6 +1193,7 @@ static struct clk app_timer_clk = {
 	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
 };
 
 #ifdef CONFIG_MACH_U300_BS335
@@ -1172,6 +1208,7 @@ static struct clk ppm_clk = {
 	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
 };
 #endif
 
@@ -1187,53 +1224,53 @@ static struct clk ppm_clk = {
  */
 static struct clk_lookup lookups[] = {
 	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba", &amba_clk),
-	DEF_LOOKUP("cpu", &cpu_clk),
-	DEF_LOOKUP("nandif", &nandif_clk),
-	DEF_LOOKUP("semi", &semi_clk),
+	DEF_LOOKUP("amba",      &amba_clk),
+	DEF_LOOKUP("cpu",       &cpu_clk),
+	DEF_LOOKUP("fsmc",      &nandif_clk),
+	DEF_LOOKUP("semi",      &semi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp", &isp_clk),
-	DEF_LOOKUP("cds", &cds_clk),
+	DEF_LOOKUP("isp",       &isp_clk),
+	DEF_LOOKUP("cds",       &cds_clk),
 #endif
-	DEF_LOOKUP("dma", &dma_clk),
-	DEF_LOOKUP("aaif", &aaif_clk),
-	DEF_LOOKUP("apex", &apex_clk),
+	DEF_LOOKUP("dma",       &dma_clk),
+	DEF_LOOKUP("msl",       &aaif_clk),
+	DEF_LOOKUP("apex",      &apex_clk),
 	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam", &xgam_clk),
-	DEF_LOOKUP("ahb", &ahb_clk),
+	DEF_LOOKUP("xgam",      &xgam_clk),
+	DEF_LOOKUP("ahb",       &ahb_clk),
 	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon", &intcon_clk),
-	DEF_LOOKUP("mspro", &mspro_clk),
-	DEF_LOOKUP("pl172", &emif_clk),
+	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
+	DEF_LOOKUP("intcon",    &intcon_clk),
+	DEF_LOOKUP("mspro",     &mspro_clk),
+	DEF_LOOKUP("pl172",     &emif_clk),
 	/* FAST bridge clocks */
-	DEF_LOOKUP("fast", &fast_clk),
-	DEF_LOOKUP("mmci", &mmcsd_clk),
+	DEF_LOOKUP("fast",      &fast_clk),
+	DEF_LOOKUP("mmci",      &mmcsd_clk),
 	/*
 	 * The .0 and .1 identifiers on these comes from the platform device
 	 * .id field and are assigned when the platform devices are registered.
 	 */
-	DEF_LOOKUP("i2s.0", &i2s0_clk),
-	DEF_LOOKUP("i2s.1", &i2s1_clk),
-	DEF_LOOKUP("stddci2c.0", &i2c0_clk),
-	DEF_LOOKUP("stddci2c.1", &i2c1_clk),
-	DEF_LOOKUP("pl022", &spi_clk),
+	DEF_LOOKUP("i2s.0",     &i2s0_clk),
+	DEF_LOOKUP("i2s.1",     &i2s1_clk),
+	DEF_LOOKUP("stu300.0",  &i2c0_clk),
+	DEF_LOOKUP("stu300.1",  &i2c1_clk),
+	DEF_LOOKUP("pl022",     &spi_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1", &uart1_clk),
+	DEF_LOOKUP("uart1",     &uart1_clk),
 #endif
 	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow", &slow_clk),
-	DEF_LOOKUP("wdog", &wdog_clk),
-	DEF_LOOKUP("uart0", &uart_clk),
-	DEF_LOOKUP("apptimer", &app_timer_clk),
-	DEF_LOOKUP("keypad", &keypad_clk),
+	DEF_LOOKUP("slow",      &slow_clk),
+	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
+	DEF_LOOKUP("uart0",     &uart_clk),
+	DEF_LOOKUP("apptimer",  &app_timer_clk),
+	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
 	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc0", &rtc_clk),
-	DEF_LOOKUP("bustr", &bustr_clk),
-	DEF_LOOKUP("evhist", &evhist_clk),
-	DEF_LOOKUP("timer", &timer_clk),
+	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
+	DEF_LOOKUP("bustr",     &bustr_clk),
+	DEF_LOOKUP("evhist",    &evhist_clk),
+	DEF_LOOKUP("timer",     &timer_clk),
 #ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm", &ppm_clk),
+	DEF_LOOKUP("ppm",       &ppm_clk),
 #endif
 };
 
@@ -1427,16 +1464,20 @@ static const struct file_operations u300_clocks_operations = {
 	.release	= single_release,
 };
 
-static void init_clk_read_procfs(void)
+static int __init init_clk_read_debugfs(void)
 {
 	/* Expose a simple debugfs interface to view all clocks */
 	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL, &u300_clocks_operations);
-}
-#else
-static inline void init_clk_read_procfs(void)
-{
+				   NULL, NULL,
+				   &u300_clocks_operations);
+	return 0;
 }
+/*
+ * This needs to come in after the core_initcall() for the
+ * overall clocks, because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_clk_read_debugfs);
 #endif
 
 static int __init u300_clock_init(void)
@@ -1462,8 +1503,6 @@ static int __init u300_clock_init(void)
 
 	clk_register();
 
-	init_clk_read_procfs();
-
 	/*
 	 * Some of these may be on when we boot the system so make sure they
 	 * are turned OFF.
-- 
cgit v1.2.3


From 1bc6f83813441d15a74dfa97966fb68fa1bdec76 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 2 Jul 2009 18:32:05 +0200
Subject: amd-iommu: set evt_buf_size correctly

The setting of this variable got lost during the suspend/resume
implementation.  But keeping this variable zero causes a divide-by-zero
error in the interrupt handler. This patch fixes this.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu_init.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index ec72c7779d6..c1b17e97252 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -472,6 +472,8 @@ static u8 * __init alloc_event_buffer(struct amd_iommu *iommu)
 	if (iommu->evt_buf == NULL)
 		return NULL;
 
+	iommu->evt_buf_size = EVT_BUFFER_SIZE;
+
 	return iommu->evt_buf;
 }
 
-- 
cgit v1.2.3


From 43644679a1e80f53e6e0155ab75b1093ba3c0365 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 2 Jul 2009 12:05:10 -0700
Subject: x86: fix power-of-2 round_up/round_down macros

These macros had two bugs:
 - the type of the mask was not correctly expanded to the full size of
   the argument being expanded, resulting in possible loss of high bits
   when mixing types.
 - the alignment argument was evaluated twice, despite the macro looking
   like a fancy function (but it really does need to be a macro, since
   it works on arbitrary integer types)

Noticed by Peter Anvin, and with a fix that is a modification of his
suggestion (bug noticed by Yinghai Lu).

Cc: Peter Anvin <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/proto.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 49fb3ecf3bb..621f56d7312 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -22,7 +22,14 @@ extern int reboot_force;
 
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
 
-#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
-#define round_down(x, y) ((x) & ~((y) - 1))
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x,y) ((__typeof__(x))((y)-1))
+#define round_up(x,y) ((((x)-1) | __round_mask(x,y))+1)
+#define round_down(x,y) ((x) & ~__round_mask(x,y))
 
 #endif /* _ASM_X86_PROTO_H */
-- 
cgit v1.2.3


From 7c5371c403abb29f01bc6cff6c5096abdf2dc524 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 1 Jul 2009 12:32:18 -0700
Subject: x86: add boundary check for 32bit res before expand e820 resource to
 alignment

fix hang with HIGHMEM_64G and 32bit resource.  According to hpa and
Linus, use (resource_size_t)-1 to fend off big ranges.

Analyzed by hpa

Reported-and-tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/e820.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa33d79..c4ca89d9aaf 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1383,6 +1383,8 @@ static unsigned long ram_alignment(resource_size_t pos)
 	return 32*1024*1024;
 }
 
+#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
+
 void __init e820_reserve_resources_late(void)
 {
 	int i;
@@ -1400,17 +1402,19 @@ void __init e820_reserve_resources_late(void)
 	 * avoid stolen RAM:
 	 */
 	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *entry = &e820_saved.map[i];
-		resource_size_t start, end;
+		struct e820entry *entry = &e820.map[i];
+		u64 start, end;
 
 		if (entry->type != E820_RAM)
 			continue;
 		start = entry->addr + entry->size;
-		end = round_up(start, ram_alignment(start));
-		if (start == end)
+		end = round_up(start, ram_alignment(start)) - 1;
+		if (end > MAX_RESOURCE_SIZE)
+			end = MAX_RESOURCE_SIZE;
+		if (start >= end)
 			continue;
-		reserve_region_with_split(&iomem_resource, start,
-						  end - 1, "RAM buffer");
+		reserve_region_with_split(&iomem_resource, start, end,
+					  "RAM buffer");
 	}
 }
 
-- 
cgit v1.2.3


From 87e8824b4588076409692b82ef4b1d98f25cd400 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:41 +0100
Subject: [ARM] 5582/1: VIC: support ST-modified version with a split init

The Nomadik SoC (not yet merged) has a modified PL090 VIC cell. This adds
support for it by reading the PrimeCell ID at the end of the page and
calling a separate init function.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed89836e90..27714ab30f2 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,6 +259,15 @@ static struct irq_chip vic_chip = {
 	.set_wake = vic_set_wake,
 };
 
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+			 u32 vic_sources);
+
+enum vic_vendor {
+	VENDOR_ARM = 0x41,
+	VENDOR_ST = 0x80,
+};
+
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -270,6 +279,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
+	u32 cellid = 0;
+	enum vic_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case VENDOR_ST:
+		vik_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case VENDOR_ARM:
+		break;
+	}
 
 	/* Disable all interrupts initially. */
 
@@ -306,3 +337,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_pm_register(base, irq_start, resume_sources);
 }
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+				u32 vic_sources)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		writel(0, base + VIC_PL190_VECT_ADDR);
+		for (i = 0; i < 19; i++) {
+			unsigned int value;
+
+			value = readl(base + VIC_PL190_VECT_ADDR);
+			writel(value, base + VIC_PL190_VECT_ADDR);
+		}
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
-- 
cgit v1.2.3


From 8c81b52422147b4b09f5adb8d0c6963342a336c6 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:52 +0100
Subject: [ARM] 5583/1: VIC: acknowledge software interrupts

The PrimeCell Vectored Interrupt Controller offers a way to trigger
any interrupt through software. This is a useful tool for developing,
but such software interrupt can only be acked by writing a bit in the
"software clear" register, or the handler will loop forever.  This
splits ack from mask, and acks the soft irq in case it was the source.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 27714ab30f2..bc1f9ad61ff 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -26,6 +26,15 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
 static void vic_mask_irq(unsigned int irq)
 {
 	void __iomem *base = get_irq_chip_data(irq);
@@ -253,7 +262,7 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
 
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
-	.ack	= vic_mask_irq,
+	.ack	= vic_ack_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
 	.set_wake = vic_set_wake,
-- 
cgit v1.2.3


From 28ad94ec61dc60207dbffdb95ff870c617fbb832 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 19:06:47 +0100
Subject: [ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and
 evaluation board

This patch adds the basic infrastructure for the Nomadik 8815
CPU and the "Nomadik Hardware Kit" NHK8815. This patch only
includes the serial console and core stuff, no drivers.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                                 |  15 +++
 arch/arm/Makefile                                |   1 +
 arch/arm/mach-nomadik/Kconfig                    |  14 ++
 arch/arm/mach-nomadik/Makefile                   |  16 +++
 arch/arm/mach-nomadik/Makefile.boot              |   4 +
 arch/arm/mach-nomadik/board-nhk8815.c            |  75 +++++++++++
 arch/arm/mach-nomadik/clock.c                    |  45 +++++++
 arch/arm/mach-nomadik/clock.h                    |  14 ++
 arch/arm/mach-nomadik/cpu-8815.c                 |  58 ++++++++
 arch/arm/mach-nomadik/include/mach/clkdev.h      |   7 +
 arch/arm/mach-nomadik/include/mach/debug-macro.S |  22 +++
 arch/arm/mach-nomadik/include/mach/entry-macro.S |  43 ++++++
 arch/arm/mach-nomadik/include/mach/hardware.h    |  90 +++++++++++++
 arch/arm/mach-nomadik/include/mach/io.h          |  22 +++
 arch/arm/mach-nomadik/include/mach/irqs.h        |  82 ++++++++++++
 arch/arm/mach-nomadik/include/mach/memory.h      |  28 ++++
 arch/arm/mach-nomadik/include/mach/mtu.h         |  45 +++++++
 arch/arm/mach-nomadik/include/mach/setup.h       |  22 +++
 arch/arm/mach-nomadik/include/mach/system.h      |  45 +++++++
 arch/arm/mach-nomadik/include/mach/timex.h       |   6 +
 arch/arm/mach-nomadik/include/mach/uncompress.h  |  63 +++++++++
 arch/arm/mach-nomadik/include/mach/vmalloc.h     |   2 +
 arch/arm/mach-nomadik/timer.c                    | 164 +++++++++++++++++++++++
 23 files changed, 883 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/Kconfig
 create mode 100644 arch/arm/mach-nomadik/Makefile
 create mode 100644 arch/arm/mach-nomadik/Makefile.boot
 create mode 100644 arch/arm/mach-nomadik/board-nhk8815.c
 create mode 100644 arch/arm/mach-nomadik/clock.c
 create mode 100644 arch/arm/mach-nomadik/clock.h
 create mode 100644 arch/arm/mach-nomadik/cpu-8815.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/hardware.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/io.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/irqs.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/memory.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/mtu.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/setup.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/system.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/timex.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-nomadik/timer.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..d8cfd706501 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -327,6 +327,19 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -716,6 +729,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-nomadik/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..97cca075d0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -137,6 +137,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
new file mode 100644
index 00000000000..abce2346106
--- /dev/null
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_NOMADIK
+
+menu "Nomadik boards"
+
+config MACH_NOMADIK_8815NHK
+	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
+	select NOMADIK_8815
+
+endmenu
+
+config NOMADIK_8815
+	bool
+
+endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
new file mode 100644
index 00000000000..fa97769fe70
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the linux kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+
+# Object file lists.
+
+obj-y			+= clock.o timer.o
+
+# Cpu revision
+obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
+
+# Specific board support
+obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot
new file mode 100644
index 00000000000..c7e75acfe6c
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
new file mode 100644
index 00000000000..eebca614d36
--- /dev/null
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/mach-nomadik/board-8815nhk.c
+ *
+ *  Copyright (C) STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ *  NHK15 board specifc driver definition
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/setup.h>
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+};
+
+/* We have a fixed clock alone, by now */
+static struct clk nhk8815_clk_48 = {
+	.rate = 48*1000*1000,
+};
+
+static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	/* currently empty, will add keypad, touchscreen etc */
+};
+
+static void __init nhk8815_platform_init(void)
+{
+	int i;
+
+	cpu8815_platform_init();
+	platform_add_devices(nhk8815_platform_devices,
+			     ARRAY_SIZE(nhk8815_platform_devices));
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+		amba_device_register(amba_devs[i], &iomem_resource);
+	}
+}
+
+MACHINE_START(NOMADIK, "NHK8815")
+	/* Maintainer: ST MicroElectronics */
+	.phys_io	= NOMADIK_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= cpu8815_map_io,
+	.init_irq	= cpu8815_init_irq,
+	.timer		= &nomadik_timer,
+	.init_machine	= nhk8815_platform_init,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
new file mode 100644
index 00000000000..9f92502a008
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.c
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/mach-nomadik/clock.c
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
+#include "clock.h"
+
+/*
+ * The nomadik board uses generic clocks, but the serial pl011 file
+ * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* enable and disable do nothing */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Create a clock structure with the given name */
+int nmdk_clk_create(struct clk *clk, const char *dev_id)
+{
+	struct clk_lookup *clkdev;
+
+	clkdev = clkdev_alloc(clk, NULL, dev_id);
+	if (!clkdev)
+		return -ENOMEM;
+	clkdev_add(clkdev);
+	return 0;
+}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
new file mode 100644
index 00000000000..235faec7f62
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.h
@@ -0,0 +1,14 @@
+
+/*
+ *  linux/arch/arm/mach-nomadik/clock.h
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct clk {
+	unsigned long		rate;
+};
+extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
new file mode 100644
index 00000000000..dec42da6956
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright STMicroelectronics, 2007.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* All SoC devices live in the same area (see hardware.h) */
+static struct map_desc nomadik_io_desc[] __initdata = {
+	{
+		.virtual =	NOMADIK_IO_VIRTUAL,
+		.pfn =		__phys_to_pfn(NOMADIK_IO_PHYSICAL),
+		.length =	NOMADIK_IO_SIZE,
+		.type = 	MT_DEVICE,
+	}
+	/* static ram and secured ram may be added later */
+};
+
+void __init cpu8815_map_io(void)
+{
+	iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+}
+
+void __init cpu8815_init_irq(void)
+{
+	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+}
+
+/*
+ * This function is called from the board init ("init_machine").
+ * Currently nothing is done as we can't register amba devs so early.
+ */
+ void __init cpu8815_platform_init(void)
+{
+	 return;
+}
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e876990e156
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x10000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		add	\rx, \rx, #0x00100000
+		add	\rx, \rx, #0x000fb000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
new file mode 100644
index 00000000000..49f1aa3bb42
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Low-level IRQ helper macros for Nomadik platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =IO_ADDRESS(NOMADIK_IC_BASE)
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	/* This stanza gets the irq mask from one of two status registers */
+	mov	\irqnr, #0
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR0]	@ get masked status
+	cmp	\irqstat, #0
+	bne	1001f
+	add	\irqnr, \irqnr, #32
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR1]	@ get masked status
+
+1001:	tst	\irqstat, #15
+	bne	1002f
+	add	\irqnr, \irqnr, #4
+	movs	\irqstat, \irqstat, lsr #4
+	bne	1001b
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:	/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
new file mode 100644
index 00000000000..6316dba3bfc
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -0,0 +1,90 @@
+/*
+ * This file contains the hardware definitions of the Nomadik.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * YOU should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
+#define NOMADIK_IO_VIRTUAL	0xF0000000	/* VA of IO  */
+#define NOMADIK_IO_PHYSICAL	0x10000000	/* PA of IO */
+#define NOMADIK_IO_SIZE		0x00300000	/* 3MB for all regs */
+
+/* used in C code, so cast to proper type */
+#define io_p2v(x) ((void __iomem *)(x) \
+			- NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define io_v2p(x) ((unsigned long)(x) \
+			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
+
+/* used in asm code, so no casts */
+#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+
+/*
+ *   Base address defination for Nomadik Onchip Logic Block
+ */
+#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
+#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
+#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
+#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
+#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
+#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
+#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
+#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
+#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
+#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
+#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
+#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
+#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
+#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
+#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
+#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
+#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
+#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
+#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
+#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
+#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
+#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
+#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
+#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
+#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface  */
+#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface  */
+#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
+#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface  */
+#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
+#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
+#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
+
+/* Other ranges, not for p2v/v2p */
+#define NOMADIK_BACKUP_RAM	0x80010000
+#define NOMADIK_EBROM		0x80000000	/* Embedded boot ROM */
+#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000	/* HAMACV Data Memory Start */
+#define NOMADIK_HAMACV_DMEM_END	0xA01FFFFF	/* HAMACV Data Memory End */
+#define NOMADIK_HAMACA_DMEM	0xA0200000	/* HAMACA Data Memory Space */
+
+#define NOMADIK_FSMC_VA		IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA		IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA		IO_ADDRESS(NOMADIK_MTU1_BASE)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h
new file mode 100644
index 00000000000..2e1eca1b824
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nomadik/include/mach/io.h   (copied from mach-sa1100)
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
new file mode 100644
index 00000000000..8faabc56039
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  mach-nomadik/include/mach/irqs.h
+ *
+ *  Copyright (C) ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_VIC_START		0	/* first VIC interrupt is 0 */
+
+/*
+ * Interrupt numbers generic for all Nomadik Chip cuts
+ */
+#define IRQ_WATCHDOG			0
+#define IRQ_SOFTINT			1
+#define IRQ_CRYPTO			2
+#define IRQ_OWM				3
+#define IRQ_MTU0			4
+#define IRQ_MTU1			5
+#define IRQ_GPIO0			6
+#define IRQ_GPIO1			7
+#define IRQ_GPIO2			8
+#define IRQ_GPIO3			9
+#define IRQ_RTC_RTT			10
+#define IRQ_SSP				11
+#define IRQ_UART0			12
+#define IRQ_DMA1			13
+#define IRQ_CLCD_MDIF			14
+#define IRQ_DMA0			15
+#define IRQ_PWRFAIL			16
+#define IRQ_UART1			17
+#define IRQ_FIRDA			18
+#define IRQ_MSP0			19
+#define IRQ_I2C0			20
+#define IRQ_I2C1			21
+#define IRQ_SDMMC			22
+#define IRQ_USBOTG			23
+#define IRQ_SVA_IT0			24
+#define IRQ_SVA_IT1			25
+#define IRQ_SAA_IT0			26
+#define IRQ_SAA_IT1			27
+#define IRQ_UART2			28
+#define IRQ_MSP2			31
+#define IRQ_L2CC			48
+#define IRQ_HPI				49
+#define IRQ_SKE				50
+#define IRQ_KP				51
+#define IRQ_MEMST			54
+#define IRQ_SGA_IT			58
+#define IRQ_USBM			60
+#define IRQ_MSP1			62
+
+#define NOMADIK_SOC_NR_IRQS		64
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_SOC_NR_IRQS)
+#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+/* Following two are used by entry_macro.S, to access our dual-vic */
+#define VIC_REG_IRQSR0		0
+#define VIC_REG_IRQSR1		0x20
+
+#endif /* __ASM_ARCH_IRQS_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
new file mode 100644
index 00000000000..1e5689d98ec
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ *  mach-nomadik/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
new file mode 100644
index 00000000000..76da7f08533
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
+#define MTU_RIS		0x04	/* Raw interrupt status */
+#define MTU_MIS		0x08	/* Masked interrupt status */
+#define MTU_ICR		0x0C	/* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
+#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
+#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
+#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA		0x80
+#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK	0x0c
+#define MTU_CRn_PRESCALE_1		0x00
+#define MTU_CRn_PRESCALE_16		0x04
+#define MTU_CRn_PRESCALE_256		0x08
+#define MTU_CRn_32BITS		0x02
+#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR	0xff0
+#define MTU_ITOP	0xff4
+
+#define MTU_PERIPH_ID0	0xfe0
+#define MTU_PERIPH_ID1	0xfe4
+#define MTU_PERIPH_ID2	0xfe8
+#define MTU_PERIPH_ID3	0xfeC
+
+#define MTU_PCELL0	0xff0
+#define MTU_PCELL1	0xff4
+#define MTU_PCELL2	0xff8
+#define MTU_PCELL3	0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
new file mode 100644
index 00000000000..a4e468cf63d
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -0,0 +1,22 @@
+
+/*
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_NOMADIK_8815
+
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern struct sys_timer nomadik_timer;
+
+#endif /* NOMADIK_8815 */
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
new file mode 100644
index 00000000000..7119f688116
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -0,0 +1,45 @@
+/*
+ *  mach-nomadik/include/mach/system.h
+ *
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+	/* FIXME: use egpio when implemented */
+
+	/* Write anything to Reset status register */
+	writel(1, src_rstsr);
+}
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h
new file mode 100644
index 00000000000..318b8896ce9
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE         2400000
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
new file mode 100644
index 00000000000..071003bc845
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+/* we need the constants in amba/serial.h, but it refers to amba_device */
+struct amba_device;
+#include <linux/amba/serial.h>
+
+#define NOMADIK_UART_DR		0x101FB000
+#define NOMADIK_UART_LCRH	0x101FB02c
+#define NOMADIK_UART_CR		0x101FB030
+#define NOMADIK_UART_FR		0x101FB018
+
+static void putc(const char c)
+{
+	/* Do nothing if the UART is not enabled. */
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+
+	if (c == '\n')
+		putc('\r');
+
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
+		barrier();
+	writeb(c, NOMADIK_UART_DR);
+}
+
+static void flush(void)
+{
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
+		barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
new file mode 100644
index 00000000000..be12e31ea52
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -0,0 +1,2 @@
+
+#define VMALLOC_END       0xe8000000
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
new file mode 100644
index 00000000000..d1738e7061d
--- /dev/null
+++ b/arch/arm/mach-nomadik/timer.c
@@ -0,0 +1,164 @@
+/*
+ *  linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+#include <mach/mtu.h>
+
+#define TIMER_CTRL	0x80	/* No divisor */
+#define TIMER_PERIODIC	0x40
+#define TIMER_SZ32BIT	0x02
+
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
+static u32	nmdk_count;		/* accumulated count */
+static u32	nmdk_cycle;		/* write-once */
+static __iomem void *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+	u32 count = readl(mtu_base + MTU_VAL(0));
+	return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+	.name		= "mtu_0",
+	.rating		= 120,
+	.read		= nmdk_read_timer,
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+			     struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* enable interrupts -- and count current value? */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		BUG(); /* Not supported, yet */
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* disable irq */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device nmdk_clkevt = {
+	.name		= "mtu_0",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 100,
+	.set_mode	= nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+	/* ack: "interrupt clear register" */
+	writel( 1 << 0, mtu_base + MTU_ICR);
+
+	/* we can't count lost ticks, unfortunately */
+	nmdk_count += nmdk_cycle;
+	nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+	.name		= "Nomadik Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+	u32 cr;
+
+	writel(0, mtu_base + MTU_CR(0)); /* off */
+
+	/* configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+	writel(cr, mtu_base + MTU_CR(0));
+	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+static void __init nmdk_timer_init(void)
+{
+	u32 src_cr;
+	unsigned long rate;
+	int bits;
+
+	rate = CLOCK_TICK_RATE; /* 2.4MHz */
+	nmdk_cycle = (rate + HZ/2) / HZ;
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+	/* Save global pointer to mtu, used by functions above */
+	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+	/* Init the timer and register clocksource */
+	nmdk_timer_reset();
+
+	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+	bits =  8*sizeof(nmdk_count);
+	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+	clocksource_register(&nmdk_clksrc);
+
+	/* Register irq and clockevents */
+	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+	nmdk_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&nmdk_clkevt);
+}
+
+struct sys_timer nomadik_timer = {
+	.init		= nmdk_timer_init,
+};
-- 
cgit v1.2.3


From 2ec1d3594563e0283873e24bb5d100dffee5d568 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:12 +0100
Subject: [ARM] 5584/1: nomadik: add gpio driver and devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                          |   3 +-
 arch/arm/mach-nomadik/Makefile            |   2 +-
 arch/arm/mach-nomadik/cpu-8815.c          |  75 ++++++
 arch/arm/mach-nomadik/gpio.c              | 396 ++++++++++++++++++++++++++++++
 arch/arm/mach-nomadik/include/mach/gpio.h |  71 ++++++
 5 files changed, 545 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-nomadik/gpio.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d8cfd706501..b1093d8786b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -336,7 +336,8 @@ config ARCH_NOMADIK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index fa97769fe70..3fc43543e6e 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o timer.o
+obj-y			+= clock.o timer.o gpio.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index dec42da6956..9917a9abdb5 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -19,12 +19,87 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static struct nmk_gpio_platform_data cpu8815_gpio[] = {
+	{
+		.name = "GPIO-0-31",
+		.first_gpio = 0,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
+		.parent_irq = IRQ_GPIO0,
+	}, {
+		.name = "GPIO-32-63",
+		.first_gpio = 32,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
+		.parent_irq = IRQ_GPIO1,
+	}, {
+		.name = "GPIO-64-95",
+		.first_gpio = 64,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
+		.parent_irq = IRQ_GPIO2,
+	}, {
+		.name = "GPIO-96-127", /* 124..127 not routed to pin */
+		.first_gpio = 96,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
+		.parent_irq = IRQ_GPIO3,
+	}
+};
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device cpu8815_amba_gpio[] = {
+	{
+		.dev = {
+			.init_name = "gpio0",
+			.platform_data = cpu8815_gpio + 0,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio1",
+			.platform_data = cpu8815_gpio + 1,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio2",
+			.platform_data = cpu8815_gpio + 2,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio3",
+			.platform_data = cpu8815_gpio + 3,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+	},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	cpu8815_amba_gpio + 0,
+	cpu8815_amba_gpio + 1,
+	cpu8815_amba_gpio + 2,
+	cpu8815_amba_gpio + 3,
+};
+
+static int __init cpu8815_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+	return 0;
+}
+arch_initcall(cpu8815_init);
+
 /* All SoC devices live in the same area (see hardware.h) */
 static struct map_desc nomadik_io_desc[] __initdata = {
 	{
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
new file mode 100644
index 00000000000..9a09b2791e0
--- /dev/null
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -0,0 +1,396 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *addr;
+	unsigned int parent_irq;
+	spinlock_t *lock;
+	/* Keep track of configured edges */
+	u32 edge_rising;
+	u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return;
+	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually clear the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually set the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+
+	nmk_chip->edge_rising &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		nmk_chip->edge_rising |= bitmask;
+	writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
+
+	nmk_chip->edge_falling &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		nmk_chip->edge_falling |= bitmask;
+	writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
+
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	nmk_gpio_irq_unmask(irq);
+
+	return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+	.name		= "Nomadik-GPIO",
+	.ack		= nmk_gpio_irq_ack,
+	.mask		= nmk_gpio_irq_mask,
+	.unmask		= nmk_gpio_irq_unmask,
+	.set_type	= nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct irq_chip *host_chip;
+	unsigned int gpio_irq;
+	u32 pending;
+	unsigned int first_irq;
+
+	nmk_chip = get_irq_data(irq);
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+		gpio_irq = first_irq + __ffs(pending);
+		generic_handle_irq(gpio_irq);
+	}
+	if (0) {/* don't ack parent irq, as ack == disable */
+		host_chip = get_irq_chip(irq);
+		host_chip->ack(irq);
+	}
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+	unsigned int first_irq;
+	int i;
+
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+		set_irq_chip(i, &nmk_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+		set_irq_chip_data(i, nmk_chip);
+	}
+	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+	set_irq_data(nmk_chip->parent_irq, nmk_chip);
+	return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+	return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	if (val)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+	.direction_input	= nmk_gpio_make_input,
+	.get			= nmk_gpio_get_input,
+	.direction_output	= nmk_gpio_make_output,
+	.set			= nmk_gpio_set_output,
+	.ngpio			= NMK_GPIO_PER_CHIP,
+	.can_sleep		= 0,
+};
+
+static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct nmk_gpio_platform_data *pdata;
+	struct nmk_gpio_chip *nmk_chip;
+	struct gpio_chip *chip;
+	int ret;
+
+	pdata = dev->dev.platform_data;
+	ret = amba_request_regions(dev, pdata->name);
+	if (ret)
+		return ret;
+
+	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	if (!nmk_chip) {
+		ret = -ENOMEM;
+		goto out_amba;
+	}
+	/*
+	 * The virt address in nmk_chip->addr is in the nomadik register space,
+	 * so we can simply convert the resource address, without remapping
+	 */
+	nmk_chip->addr = io_p2v(dev->res.start);
+	nmk_chip->chip = nmk_gpio_template;
+	nmk_chip->parent_irq = pdata->parent_irq;
+
+	chip = &nmk_chip->chip;
+	chip->base = pdata->first_gpio;
+	chip->label = pdata->name;
+	chip->dev = &dev->dev;
+	chip->owner = THIS_MODULE;
+
+	ret = gpiochip_add(&nmk_chip->chip);
+	if (ret)
+		goto out_free;
+
+	amba_set_drvdata(dev, nmk_chip);
+
+	nmk_gpio_init_irq(nmk_chip);
+
+	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	return 0;
+
+ out_free:
+	kfree(nmk_chip);
+ out_amba:
+	amba_release_regions(dev);
+	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+		  pdata->first_gpio, pdata->first_gpio+31);
+	return ret;
+}
+
+static int nmk_gpio_remove(struct amba_device *dev)
+{
+	struct nmk_gpio_chip *nmk_chip;
+
+	nmk_chip = amba_get_drvdata(dev);
+	gpiochip_remove(&nmk_chip->chip);
+	kfree(nmk_chip);
+	amba_release_regions(dev);
+	return 0;
+}
+
+
+/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct amba_id nmk_gpio_ids[] = {
+	{
+		.id	= 0x1f080060,
+		.mask	= 0xffefffff,
+	},
+	{0, 0},
+};
+
+static struct amba_driver nmk_gpio_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = "gpio",
+		},
+	.probe = nmk_gpio_probe,
+	.remove = nmk_gpio_remove,
+	.suspend = NULL, /* to be done */
+	.resume = NULL,
+	.id_table = nmk_gpio_ids,
+};
+
+static int __init nmk_gpio_init(void)
+{
+	return amba_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
new file mode 100644
index 00000000000..61577c9f9a7
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -0,0 +1,71 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int parent_irq;
+};
+
+#endif /* __ASM_ARCH_GPIO_H */
-- 
cgit v1.2.3


From 63796b740b888b396eb0cc78917d755693cc224c Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:22 +0100
Subject: [ARM] 5585/1: nomadik: add gpio-i2c devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/Kconfig       |  7 ++++
 arch/arm/mach-nomadik/Makefile      |  3 ++
 arch/arm/mach-nomadik/i2c-8815nhk.c | 65 +++++++++++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/i2c-8815nhk.c

(limited to 'arch')

diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index abce2346106..2a02b49c40f 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -11,4 +11,11 @@ endmenu
 config NOMADIK_8815
 	bool
 
+
+config I2C_BITBANG_8815NHK
+	tristate "Driver for bit-bang busses found on the 8815 NHK"
+	depends on I2C && MACH_NOMADIK_8815NHK
+	select I2C_ALGOBIT
+	default y
+
 endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 3fc43543e6e..412040982a4 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -14,3 +14,6 @@ obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
 
 # Specific board support
 obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
+
+# Nomadik extra devices
+obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
new file mode 100644
index 00000000000..abfe25a08d6
--- /dev/null
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -0,0 +1,65 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are two busses in the 8815NHK.
+ * They could, in theory, be driven by the hardware component, but we
+ * use bit-bang through GPIO by now, to keep things simple
+ */
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 62,
+	.sda_pin = 63,
+};
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 53,
+	.sda_pin = 54,
+};
+
+/* first bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev0 = {
+	.name	= "i2c-gpio",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data0,
+	},
+};
+/* second bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev1 = {
+	.name	= "i2c-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data1,
+	},
+};
+
+static int __init nhk8815_i2c_init(void)
+{
+	nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev0);
+
+	nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev1);
+
+	return 0;
+}
+
+static void __exit nhk8815_i2c_exit(void)
+{
+	platform_device_unregister(&nhk8815_i2c_dev0);
+	platform_device_unregister(&nhk8815_i2c_dev1);
+	return;
+}
+
+module_init(nhk8815_i2c_init);
+module_exit(nhk8815_i2c_exit);
-- 
cgit v1.2.3


From 725b1f9d86822246e5a1237bf97d2783857d8a3a Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:32 +0100
Subject: [ARM] 5586/1: nomadik board: added ethernet

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/board-nhk8815.c | 38 ++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index eebca614d36..79bdea943eb 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -14,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -45,8 +47,42 @@ static struct clk nhk8815_clk_48 = {
 	.rate = 48*1000*1000,
 };
 
+static struct resource nhk8815_eth_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x34000000 + 0x300,
+		.end = 0x34000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = NOMADIK_GPIO_TO_IRQ(115),
+		.end = NOMADIK_GPIO_TO_IRQ(115),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	}
+};
+
+static struct platform_device nhk8815_eth_device = {
+	.name = "smc91x",
+	.resource = nhk8815_eth_resources,
+	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
+};
+
+static int __init nhk8815_eth_init(void)
+{
+	int gpio_nr = 115; /* hardwired in the board */
+	int err;
+
+	err = gpio_request(gpio_nr, "eth_irq");
+	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
+	if (!err) err = gpio_direction_input(gpio_nr);
+	if (err)
+		pr_err("Error %i in %s\n", err, __func__);
+	return err;
+}
+device_initcall(nhk8815_eth_init);
+
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
-	/* currently empty, will add keypad, touchscreen etc */
+	&nhk8815_eth_device,
+	/* will add more devices */
 };
 
 static void __init nhk8815_platform_init(void)
-- 
cgit v1.2.3


From 0b260fd4b0eb7c90f9258bfa6317ae553319b5da Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:43 +0100
Subject: [ARM] 5587/1: nomadik: add l2cc

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/cpu-8815.c | 8 +++++++-
 arch/arm/mm/Kconfig              | 2 +-
 2 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9917a9abdb5..f93c5963419 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -27,6 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
 	{
@@ -125,9 +128,12 @@ void __init cpu8815_init_irq(void)
 
 /*
  * This function is called from the board init ("init_machine").
- * Currently nothing is done as we can't register amba devs so early.
  */
  void __init cpu8815_platform_init(void)
 {
+#ifdef CONFIG_CACHE_L2X0
+	/* At full speed latency must be >=2, so 0x249 in low bits */
+	l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+#endif
 	 return;
 }
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 83c025e72ce..5fe595aeba6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -758,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
 	default y
 	select OUTER_CACHE
 	help
-- 
cgit v1.2.3


From c2b455474e4c6bc8bab6506e2a08dbd5ad50d74d Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:53 +0100
Subject: [ARM] 5588/1: nomadik: add defconfig for nhk8815

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/nhk8815_defconfig | 1316 ++++++++++++++++++++++++++++++++++++
 1 file changed, 1316 insertions(+)
 create mode 100644 arch/arm/configs/nhk8815_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
new file mode 100644
index 00000000000..9bb45b932f0
--- /dev/null
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 66d9e2102af038bcd3286a6efce83e1877e5997b Mon Sep 17 00:00:00 2001
From: Matthias Kaehlcke <matthias@kaehlcke.net>
Date: Sun, 28 Jun 2009 11:19:39 +0100
Subject: [ARM] 5576/1: Update kb9202_defconfig

The default configuration file for the KwikByte kb9202 board was based on a 2.6.13-rc2 kernel and doesn't produce a bootable kernel. Update the
configuration in order to produce a bootable image.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/kb9202_defconfig | 1158 +++++++++++++++++++++++++++----------
 1 file changed, 842 insertions(+), 316 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 8e74c66f239..605a8462f17 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -1,109 +1,246 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Sun Aug 14 19:26:59 2005
+# Linux kernel version: 2.6.30-rc8
+# Wed Jun  3 13:52:33 2009
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
-# Loadable module support
+# IO Schedulers
 #
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
 CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
-# AT91RM9200 Implementations
+# AT91RM9200 Board Type
 #
+# CONFIG_MACH_ONEARM is not set
 # CONFIG_ARCH_AT91RM9200DK is not set
 # CONFIG_MACH_AT91RM9200EK is not set
 # CONFIG_MACH_CSB337 is not set
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -112,23 +249,48 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -137,8 +299,16 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -149,74 +319,251 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram rw initrd=0x20210000,654933"
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
 
 #
-# Device Drivers
+# Networking options
 #
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
-# Generic Driver Options
+# Network testing
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-CONFIG_DEBUG_DRIVER=y
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Memory Technology Devices (MTD)
+# Device Drivers
 #
-# CONFIG_MTD is not set
 
 #
-# Parallel port support
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 
 #
-# IO Schedulers
+# EEPROM support
 #
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -232,145 +579,87 @@ CONFIG_CHR_DEV_SG=y
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_NET_RADIO is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -380,7 +669,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -390,23 +678,25 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -419,215 +709,362 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# IPMI
+# Memory mapped GPIO expanders:
 #
-# CONFIG_IPMI_HANDLER is not set
 
 #
-# Watchdog Cards
+# I2C GPIO expanders:
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
+# PCI GPIO expanders:
 #
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# SPI GPIO expanders:
 #
-# CONFIG_AT91_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# I2C support
+# Watchdog Device Drivers
 #
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
 
 #
-# USB HID Boot Protocol drivers
+# also be needed; see USB_STORAGE Help for more info
 #
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
 #
+# CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
+# USB port drivers
 #
-# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_SERIAL is not set
 
 #
-# Video4Linux support is needed for USB Multimedia device support
+# USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
 
 #
-# USB Network Adapters
+# OTG and related infrastructure
 #
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# USB port drivers
+# MMC/SD/SDIO Card Drivers
 #
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# USB Serial Converter support
+# MMC/SD/SDIO Host Controller Drivers
 #
-# CONFIG_USB_SERIAL is not set
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# USB Miscellaneous drivers
+# RTC interfaces
 #
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# USB DSL modem support
+# SPI RTC drivers
 #
 
 #
-# USB Gadget Support
+# Platform RTC drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# MMC/SD Card support
+# on-CPU RTC drivers
 #
-# CONFIG_MMC is not set
+CONFIG_RTC_DRV_AT91RM9200=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
-# XFS support
+# Caches
 #
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -639,7 +1076,7 @@ CONFIG_AUTOFS4_FS=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -649,53 +1086,70 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
+# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
@@ -719,7 +1173,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -733,47 +1187,119 @@ CONFIG_NLS_ASCII=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 90eab5e09de20e8d991bbb11f6edfb573f906352 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Mon, 27 Apr 2009 08:29:12 -0400
Subject: parisc: wire up preadv/pwritev syscalls

Generic compat handlers look appropriate, so use those.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/unistd.h   | 4 +++-
 arch/parisc/kernel/syscall_table.S | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index ef26b009dc5..a3c341976dc 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -807,8 +807,10 @@
 #define __NR_dup3		(__NR_Linux + 312)
 #define __NR_pipe2		(__NR_Linux + 313)
 #define __NR_inotify_init1	(__NR_Linux + 314)
+#define __NR_preadv		(__NR_Linux + 315)
+#define __NR_pwritev		(__NR_Linux + 316)
 
-#define __NR_Linux_syscalls	(__NR_inotify_init1 + 1)
+#define __NR_Linux_syscalls	(__NR_pwritev + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 03b9a01bc16..6a6296148e5 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,6 +413,8 @@
 	ENTRY_SAME(dup3)
 	ENTRY_SAME(pipe2)
 	ENTRY_SAME(inotify_init1)
+	ENTRY_COMP(preadv)
+	ENTRY_COMP(pwritev)
 
 	/* Nothing yet */
 
-- 
cgit v1.2.3


From 071327ec9005e9a826d088d37021ed2c88e683f7 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Fri, 3 Apr 2009 01:49:22 +0000
Subject: parisc: remove CVS keywords

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/dma.h  | 3 +--
 arch/parisc/kernel/cache.c     | 3 +--
 arch/parisc/kernel/pci.c       | 3 +--
 arch/parisc/kernel/processor.c | 3 +--
 arch/parisc/kernel/setup.c     | 3 +--
 arch/parisc/lib/checksum.c     | 2 --
 arch/parisc/mm/fault.c         | 3 +--
 7 files changed, 6 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/dma.h b/arch/parisc/include/asm/dma.h
index 31ad0f05af3..f7a18f96870 100644
--- a/arch/parisc/include/asm/dma.h
+++ b/arch/parisc/include/asm/dma.h
@@ -1,5 +1,4 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+/* asm/dma.h: Defines for using and allocating dma channels.
  * Written by Hennus Bergman, 1992.
  * High DMA channel support & info by Hannu Savolainen
  * and John Boyd, Nov. 1992.
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 837530ea32e..f34082da009 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -1,5 +1,4 @@
-/* $Id: cache.c,v 1.4 2000/01/25 00:11:38 prumpf Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 6936386c986..f7064abc3bb 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -1,5 +1,4 @@
-/* $Id: pci.c,v 1.6 2000/01/29 00:12:05 grundler Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index e09d0f7fb6b..1ca69a808e3 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -1,5 +1,4 @@
-/*    $Id: processor.c,v 1.1 2002/07/20 16:27:06 rhirst Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 82131ca8e05..cb71f3dac99 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -1,5 +1,4 @@
-/*    $Id: setup.c,v 1.8 2000/02/02 04:42:38 prumpf Exp $
- *
+/*
  *    Initial setup-routines for HP 9000 based hardware.
  *
  *    Copyright (C) 1991, 1992, 1995  Linus Torvalds
diff --git a/arch/parisc/lib/checksum.c b/arch/parisc/lib/checksum.c
index 462696d30d3..ae66d31f9ec 100644
--- a/arch/parisc/lib/checksum.c
+++ b/arch/parisc/lib/checksum.c
@@ -13,8 +13,6 @@
  *		modify it under the terms of the GNU General Public License
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.3 1997/12/01 17:57:34 ralf Exp $
  */
 #include <linux/module.h>
 #include <linux/types.h>
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index bfb6dd6ab38..c6afbfc9577 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -1,5 +1,4 @@
-/* $Id: fault.c,v 1.5 2000/01/26 16:20:29 jsm Exp $
- *
+/*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
-- 
cgit v1.2.3


From 692c14a5931341a37e4fbfca5fa96751187a108f Mon Sep 17 00:00:00 2001
From: Bastian Blank <waldi@debian.org>
Date: Sat, 4 Apr 2009 20:54:26 +0000
Subject: parisc: Remove casts from atomic macros

The atomic operations on parisc are defined as macros. The macros
includes casts which disallows the use of some syntax elements and
produces error like this:

net/phonet/pep.c: In function 'pipe_rcv_status':
net/phonet/pep.c:262: error: lvalue required as left operand of assignment

The patch removes this superfluous casts.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/atomic.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 7eeaff94436..82e9688f658 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -222,13 +222,13 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#define atomic_add(i,v)	((void)(__atomic_add_return( ((int)(i)),(v))))
-#define atomic_sub(i,v)	((void)(__atomic_add_return(-((int)(i)),(v))))
+#define atomic_add(i,v)	((void)(__atomic_add_return( (i),(v))))
+#define atomic_sub(i,v)	((void)(__atomic_add_return(-(i),(v))))
 #define atomic_inc(v)	((void)(__atomic_add_return(   1,(v))))
 #define atomic_dec(v)	((void)(__atomic_add_return(  -1,(v))))
 
-#define atomic_add_return(i,v)	(__atomic_add_return( ((int)(i)),(v)))
-#define atomic_sub_return(i,v)	(__atomic_add_return(-((int)(i)),(v)))
+#define atomic_add_return(i,v)	(__atomic_add_return( (i),(v)))
+#define atomic_sub_return(i,v)	(__atomic_add_return(-(i),(v)))
 #define atomic_inc_return(v)	(__atomic_add_return(   1,(v)))
 #define atomic_dec_return(v)	(__atomic_add_return(  -1,(v)))
 
-- 
cgit v1.2.3


From 4fb11781a044552dded5342e1a78cf92a74683db Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Sun, 5 Apr 2009 02:53:47 +0000
Subject: parisc: kill WARN in free_initmem when DEBUG_KERNEL

Doing an IPI with local interrupts off triggers a warning. We
don't need to be quite so ridiculously paranoid. Also, clean up
a bit of the code a little.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/mm/init.c | 29 +++++++++--------------------
 1 file changed, 9 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 4356ceb1e36..6c5ea964647 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -370,34 +370,22 @@ static void __init setup_bootmem(void)
 
 void free_initmem(void)
 {
-	unsigned long addr, init_begin, init_end;
-
-	printk(KERN_INFO "Freeing unused kernel memory: ");
+	unsigned long addr;
+	unsigned long init_begin = (unsigned long)__init_begin;
+	unsigned long init_end = (unsigned long)__init_end;
 
 #ifdef CONFIG_DEBUG_KERNEL
 	/* Attempt to catch anyone trying to execute code here
 	 * by filling the page with BRK insns.
-	 * 
-	 * If we disable interrupts for all CPUs, then IPI stops working.
-	 * Kinda breaks the global cache flushing.
 	 */
-	local_irq_disable();
-
-	memset(__init_begin, 0x00,
-		(unsigned long)__init_end - (unsigned long)__init_begin);
-
-	flush_data_cache();
-	asm volatile("sync" : : );
-	flush_icache_range((unsigned long)__init_begin, (unsigned long)__init_end);
-	asm volatile("sync" : : );
-
-	local_irq_enable();
+	memset(init_begin, 0x00, init_end - init_begin);
+	flush_icache_range(init_begin, init_end);
 #endif
 	
 	/* align __init_begin and __init_end to page size,
 	   ignoring linker script where we might have tried to save RAM */
-	init_begin = PAGE_ALIGN((unsigned long)(__init_begin));
-	init_end   = PAGE_ALIGN((unsigned long)(__init_end));
+	init_begin = PAGE_ALIGN(init_begin);
+	init_end = PAGE_ALIGN(init_end);
 	for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
@@ -409,7 +397,8 @@ void free_initmem(void)
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
 	
-	printk("%luk freed\n", (init_end - init_begin) >> 10);
+	printk(KERN_INFO "Freeing unused kernel memory: %luk freed\n",
+		(init_end - init_begin) >> 10);
 }
 
 
-- 
cgit v1.2.3


From 7d17e2763129ea307702fcdc91f6e9d114b65c2d Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Thu, 30 Apr 2009 21:39:45 +0000
Subject: parisc: fix ldcw inline assembler

There are two reasons to expose the memory *a in the asm:

1) To prevent the compiler from discarding a preceeding write to *a, and
2) to prevent it from caching *a in a register over the asm.

The change has had a few days testing with a SMP build of 2.6.22.19
running on a rp3440.

This patch is about the correctness of the __ldcw() macro itself.
The use of the macro should be confined to small inline functions
to try to limit the effect of clobbering memory on GCC's optimization
of loads and stores.

Signed-off-by: Dave Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/system.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/system.h b/arch/parisc/include/asm/system.h
index ee80c920b46..d91357bca5b 100644
--- a/arch/parisc/include/asm/system.h
+++ b/arch/parisc/include/asm/system.h
@@ -168,8 +168,8 @@ static inline void set_eiem(unsigned long val)
 /* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
 #define __ldcw(a) ({						\
 	unsigned __ret;						\
-	__asm__ __volatile__(__LDCW " 0(%1),%0"			\
-		: "=r" (__ret) : "r" (a));			\
+	__asm__ __volatile__(__LDCW " 0(%2),%0"			\
+		: "=r" (__ret), "+m" (*(a)) : "r" (a));		\
 	__ret;							\
 })
 
-- 
cgit v1.2.3


From 47b4150baa003fb83b93365f3eadd4c373e4fa6c Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Sat, 6 Jun 2009 21:54:28 +0000
Subject: parisc: fix irq compile bugs in arch/parisc/kernel/irq.c

Fix miscompilation in arch/parisc/kernel/irq.c:
123: warning: passing arg 1 of `cpumask_setall' from incompatible pointer type
141: warning: passing arg 1 of `cpumask_copy' from incompatible pointer type
300: warning: passing arg 1 of `cpumask_copy' from incompatible pointer type
357: warning: passing arg 2 of `cpumask_copy' from incompatible pointer type

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/kernel/irq.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 8007f1e6572..639451c50e4 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
 	if (CHECK_IRQ_PER_CPU(irq)) {
 		/* Bad linux design decision.  The mask has already
 		 * been set; we must reset it */
-		cpumask_setall(&irq_desc[irq].affinity);
+		cpumask_setall(irq_desc[irq].affinity);
 		return -EINVAL;
 	}
 
@@ -138,7 +138,7 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 	if (cpu_dest < 0)
 		return -1;
 
-	cpumask_copy(&irq_desc[irq].affinity, dest);
+	cpumask_copy(irq_desc[irq].affinity, dest);
 
 	return 0;
 }
@@ -299,7 +299,7 @@ int txn_alloc_irq(unsigned int bits_wide)
 unsigned long txn_affinity_addr(unsigned int irq, int cpu)
 {
 #ifdef CONFIG_SMP
-	cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
+	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
 #endif
 
 	return per_cpu(cpu_data, cpu).txn_addr;
@@ -356,7 +356,7 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq = eirr_to_irq(eirr_val);
 
 #ifdef CONFIG_SMP
-	cpumask_copy(&dest, &irq_desc[irq].affinity);
+	cpumask_copy(&dest, irq_desc[irq].affinity);
 	if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
 	    !cpu_isset(smp_processor_id(), dest)) {
 		int cpu = first_cpu(dest);
-- 
cgit v1.2.3


From dfe07565021959f0f646e9e775810c1bfbe0f6d6 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 10 Jun 2009 19:56:04 +0000
Subject: parisc: remove obsolete hw_interrupt_type

The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have
been kept around for migration reasons.  After more than two years it's
time to remove them finally.

This patch cleans up one of the remaining users.  When all such patches
hit mainline we can remove the defines and typedefs finally.

Impact: cleanup

Convert the last remaining users to struct irq_chip and remove the
define.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 639451c50e4..330f536a932 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -144,7 +144,7 @@ static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 }
 #endif
 
-static struct hw_interrupt_type cpu_interrupt_type = {
+static struct irq_chip cpu_interrupt_type = {
 	.typename	= "CPU",
 	.startup	= cpu_startup_irq,
 	.shutdown	= cpu_disable_irq,
-- 
cgit v1.2.3


From e9b2601073aa57ffde7259afbe86f405060058e3 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Mon, 6 Apr 2009 09:29:58 +0000
Subject: parisc: decode_exc.c should include kernel.h

Fix this build error:
arch/parisc/math-emu/decode_exc.c:351: undefined reference to `printk'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/math-emu/decode_exc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c
index 66c8a9f6a27..3ca1c614921 100644
--- a/arch/parisc/math-emu/decode_exc.c
+++ b/arch/parisc/math-emu/decode_exc.c
@@ -40,7 +40,7 @@
  * END_DESC
 */
 
-
+#include <linux/kernel.h>
 #include "float.h"
 #include "sgl_float.h"
 #include "dbl_float.h"
-- 
cgit v1.2.3


From ebc30a0f67a4d6a9470556f4311478b3b04c2b1f Mon Sep 17 00:00:00 2001
From: Coly Li <coly.li@suse.de>
Date: Thu, 30 Apr 2009 22:43:46 +0000
Subject: parisc: add parameter to read_cr16()

This patch modifies parameter of au1x_counter1_read() from 'void' to 'struct
clocksource *cs', which fixes compile warning for incompatible parameter type.

Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d4dd05674c6..d97d07f47a5 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -173,7 +173,7 @@ EXPORT_SYMBOL(profile_pc);
 
 /* clock source code */
 
-static cycle_t read_cr16(void)
+static cycle_t read_cr16(struct clocksource *cs)
 {
 	return get_cycles();
 }
-- 
cgit v1.2.3


From 87451d850c895470a122308086069b7c326c914b Mon Sep 17 00:00:00 2001
From: Randolph Chung <randolph@tausq.org>
Date: Tue, 23 Jun 2009 14:53:26 +0000
Subject: parisc: fix mismatched parenthesis in memcpy.c

>>>> I think this is what was intended? Note that this patch may affect
>>>> profiling.
>>> it really should be
>>>
>>> -    if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
>>> +    if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
>>>
>>> randolph

Reported-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Randolph Chung <tausq@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/lib/memcpy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index bbda909c866..abf41f4632a 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -405,7 +405,7 @@ byte_copy:
 
 unaligned_copy:
 	/* possibly we are aligned on a word, but not on a double... */
-	if (likely(t1 & (sizeof(unsigned int)-1)) == 0) {
+	if (likely((t1 & (sizeof(unsigned int)-1)) == 0)) {
 		t2 = src & (sizeof(unsigned int) - 1);
 
 		if (unlikely(t2 != 0)) {
-- 
cgit v1.2.3


From 84be31be3727d11b2a91781306b642e801c5a379 Mon Sep 17 00:00:00 2001
From: Grant Grundler <grundler@parisc-linux.org>
Date: Mon, 1 Jun 2009 00:20:23 +0000
Subject: parisc: fix "delay!" timer handling

Rewrote timer_interrupt() to properly handle the "delayed!" case.

If we used floating point math to compute the number of ticks that had
elapsed since the last timer interrupt, it could take up to 12K cycles
(emperical!) to handle the interrupt. Existing code assumed it would
never take more than 8k cycles. We end up programming Interval Timer
to a value less than "current" cycle counter.  Thus have to wait until
Interval Timer "wrapped" and would then get the "delayed!" printk that
I moved below.

Since we don't really know what the upper limit is, I prefer to read
CR16 again after we've programmed it to make sure we won't have to
wait for CR16 to wrap.

Further, the printk was between reading CR16 (cycle couner) and writing CR16
(the interval timer). This would cause us to continue to set the interval
timer to a value that was "behind" the cycle counter. Rinse and repeat.
So no printk's between reading CR16 and setting next interval timer.

Tested on A500 (550 Mhz PA8600).

Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

----
Kyle, Helge, and other parisc's,
Please test on 32-bit before committing.
I think I have it right but recognize I might not.

TODO: I wanted to use "do_div()" in order to get both remainder
and value back with one division op. That should help with the
latency alot but can be applied seperately from this patch.

thanks,
grant
---
 arch/parisc/kernel/time.c | 88 ++++++++++++++++++++++++++++-------------------
 1 file changed, 53 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index d97d07f47a5..a79c6f9e7e2 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -56,9 +56,9 @@ static unsigned long clocktick __read_mostly;	/* timer cycles per tick */
  */
 irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 {
-	unsigned long now;
+	unsigned long now, now2;
 	unsigned long next_tick;
-	unsigned long cycles_elapsed, ticks_elapsed;
+	unsigned long cycles_elapsed, ticks_elapsed = 1;
 	unsigned long cycles_remainder;
 	unsigned int cpu = smp_processor_id();
 	struct cpuinfo_parisc *cpuinfo = &per_cpu(cpu_data, cpu);
@@ -71,44 +71,24 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 	/* Initialize next_tick to the expected tick time. */
 	next_tick = cpuinfo->it_value;
 
-	/* Get current interval timer.
-	 * CR16 reads as 64 bits in CPU wide mode.
-	 * CR16 reads as 32 bits in CPU narrow mode.
-	 */
+	/* Get current cycle counter (Control Register 16). */
 	now = mfctl(16);
 
 	cycles_elapsed = now - next_tick;
 
-	if ((cycles_elapsed >> 5) < cpt) {
+	if ((cycles_elapsed >> 6) < cpt) {
 		/* use "cheap" math (add/subtract) instead
 		 * of the more expensive div/mul method
 		 */
 		cycles_remainder = cycles_elapsed;
-		ticks_elapsed = 1;
 		while (cycles_remainder > cpt) {
 			cycles_remainder -= cpt;
 			ticks_elapsed++;
 		}
 	} else {
+		/* TODO: Reduce this to one fdiv op */
 		cycles_remainder = cycles_elapsed % cpt;
-		ticks_elapsed = 1 + cycles_elapsed / cpt;
-	}
-
-	/* Can we differentiate between "early CR16" (aka Scenario 1) and
-	 * "long delay" (aka Scenario 3)? I don't think so.
-	 *
-	 * We expected timer_interrupt to be delivered at least a few hundred
-	 * cycles after the IT fires. But it's arbitrary how much time passes
-	 * before we call it "late". I've picked one second.
-	 */
-	if (unlikely(ticks_elapsed > HZ)) {
-		/* Scenario 3: very long delay?  bad in any case */
-		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
-			" cycles %lX rem %lX "
-			" next/now %lX/%lX\n",
-			cpu,
-			cycles_elapsed, cycles_remainder,
-			next_tick, now );
+		ticks_elapsed += cycles_elapsed / cpt;
 	}
 
 	/* convert from "division remainder" to "remainder of clock tick" */
@@ -122,18 +102,56 @@ irqreturn_t __irq_entry timer_interrupt(int irq, void *dev_id)
 
 	cpuinfo->it_value = next_tick;
 
-	/* Skip one clocktick on purpose if we are likely to miss next_tick.
-	 * We want to avoid the new next_tick being less than CR16.
-	 * If that happened, itimer wouldn't fire until CR16 wrapped.
-	 * We'll catch the tick we missed on the tick after that.
+	/* Program the IT when to deliver the next interrupt.
+	 * Only bottom 32-bits of next_tick are writable in CR16!
 	 */
-	if (!(cycles_remainder >> 13))
-		next_tick += cpt;
-
-	/* Program the IT when to deliver the next interrupt. */
-	/* Only bottom 32-bits of next_tick are written to cr16.  */
 	mtctl(next_tick, 16);
 
+	/* Skip one clocktick on purpose if we missed next_tick.
+	 * The new CR16 must be "later" than current CR16 otherwise
+	 * itimer would not fire until CR16 wrapped - e.g 4 seconds
+	 * later on a 1Ghz processor. We'll account for the missed
+	 * tick on the next timer interrupt.
+	 *
+	 * "next_tick - now" will always give the difference regardless
+	 * if one or the other wrapped. If "now" is "bigger" we'll end up
+	 * with a very large unsigned number.
+	 */
+	now2 = mfctl(16);
+	if (next_tick - now2 > cpt)
+		mtctl(next_tick+cpt, 16);
+
+#if 1
+/*
+ * GGG: DEBUG code for how many cycles programming CR16 used.
+ */
+	if (unlikely(now2 - now > 0x3000)) 	/* 12K cycles */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): SLOW! 0x%lx cycles!"
+			" cyc %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu, now2 - now, cycles_elapsed, cycles_remainder,
+			next_tick, now );
+#endif
+
+	/* Can we differentiate between "early CR16" (aka Scenario 1) and
+	 * "long delay" (aka Scenario 3)? I don't think so.
+	 *
+	 * Timer_interrupt will be delivered at least a few hundred cycles
+	 * after the IT fires. But it's arbitrary how much time passes
+	 * before we call it "late". I've picked one second.
+	 *
+	 * It's important NO printk's are between reading CR16 and
+	 * setting up the next value. May introduce huge variance.
+	 */
+	if (unlikely(ticks_elapsed > HZ)) {
+		/* Scenario 3: very long delay?  bad in any case */
+		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
+			" cycles %lX rem %lX "
+			" next/now %lX/%lX\n",
+			cpu,
+			cycles_elapsed, cycles_remainder,
+			next_tick, now );
+	}
 
 	/* Done mucking with unreliable delivery of interrupts.
 	 * Go do system house keeping.
-- 
cgit v1.2.3


From e82a3b75127188f20c7780bec580e148beb29da7 Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Tue, 16 Jun 2009 20:51:48 +0000
Subject: parisc: ensure broadcast tlb purge runs single threaded

The TLB flushing functions on hppa, which causes PxTLB broadcasts on the system
bus, needs to be protected by irq-safe spinlocks to avoid irq handlers to deadlock
the kernel. The deadlocks only happened during I/O intensive loads and triggered
pretty seldom, which is why this bug went so long unnoticed.

Signed-off-by: Helge Deller <deller@gmx.de>
[edited to use spin_lock_irqsave on UP as well since we'd been locking there
 all this time anyway, --kyle]
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/tlbflush.h | 14 +++++++-------
 arch/parisc/kernel/cache.c         | 23 +++++++++++++++--------
 arch/parisc/kernel/pci-dma.c       | 12 ++++++++----
 3 files changed, 30 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index 1f6fd4fc05b..8f1a8100bf2 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -12,14 +12,12 @@
  * N class systems, only one PxTLB inter processor broadcast can be
  * active at any one time on the Merced bus.  This tlb purge
  * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class.  We also need to have
- * preemption disabled on uniprocessor machines, and spin_lock does that
- * nicely.
+ * it on all systems not just the N class.
  */
 extern spinlock_t pa_tlb_lock;
 
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+#define purge_tlb_start(flags)	spin_lock_irqsave(&pa_tlb_lock, flags)
+#define purge_tlb_end(flags)	spin_unlock_irqrestore(&pa_tlb_lock, flags)
 
 extern void flush_tlb_all(void);
 extern void flush_tlb_all_local(void *);
@@ -63,14 +61,16 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 static inline void flush_tlb_page(struct vm_area_struct *vma,
 	unsigned long addr)
 {
+	unsigned long flags;
+
 	/* For one page, it's not worth testing the split_tlb variable */
 
 	mb();
 	mtsp(vma->vm_mm->context,1);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb(addr);
 	pitlb(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 void __flush_tlb_range(unsigned long sid,
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f34082da009..b6ed34de14e 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -397,12 +397,13 @@ EXPORT_SYMBOL(flush_kernel_icache_range_asm);
 
 void clear_user_page_asm(void *page, unsigned long vaddr)
 {
+	unsigned long flags;
 	/* This function is implemented in assembly in pacache.S */
 	extern void __clear_user_page_asm(void *page, unsigned long vaddr);
 
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	__clear_user_page_asm(page, vaddr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 
 #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -443,20 +444,24 @@ extern void clear_user_page_asm(void *page, unsigned long vaddr);
 
 void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
 {
+	unsigned long flags;
+
 	purge_kernel_dcache_page((unsigned long)page);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(page);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 	clear_user_page_asm(page, vaddr);
 }
 EXPORT_SYMBOL(clear_user_page);
 
 void flush_kernel_dcache_page_addr(void *addr)
 {
+	unsigned long flags;
+
 	flush_kernel_dcache_page_asm(addr);
-	purge_tlb_start();
+	purge_tlb_start(flags);
 	pdtlb_kernel(addr);
-	purge_tlb_end();
+	purge_tlb_end(flags);
 }
 EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
 
@@ -489,8 +494,10 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
 	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
 		flush_tlb_all();
 	else {
+		unsigned long flags;
+
 		mtsp(sid, 1);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		if (split_tlb) {
 			while (npages--) {
 				pdtlb(start);
@@ -503,7 +510,7 @@ void __flush_tlb_range(unsigned long sid, unsigned long start,
 				start += PAGE_SIZE;
 			}
 		}
-		purge_tlb_end();
+		purge_tlb_end(flags);
 	}
 }
 
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 7d927eac932..c07f618ff7d 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -90,12 +90,14 @@ static inline int map_pte_uncached(pte_t * pte,
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
+
 		if (!pte_none(*pte))
 			printk(KERN_ERR "map_pte_uncached: page already exists\n");
 		set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		(*paddr_ptr) += PAGE_SIZE;
@@ -168,11 +170,13 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr,
 	if (end > PMD_SIZE)
 		end = PMD_SIZE;
 	do {
+		unsigned long flags;
 		pte_t page = *pte;
+
 		pte_clear(&init_mm, vaddr, pte);
-		purge_tlb_start();
+		purge_tlb_start(flags);
 		pdtlb_kernel(orig_vaddr);
-		purge_tlb_end();
+		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
 		pte++;
-- 
cgit v1.2.3


From 4435607e986c792a8753f8850b570fdd80b21b10 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Tue, 23 Jun 2009 11:40:37 -0400
Subject: parisc: wire up rt_tgsigqueueinfo

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/unistd.h   | 3 ++-
 arch/parisc/kernel/syscall_table.S | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index a3c341976dc..4e2aa0d1496 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -809,8 +809,9 @@
 #define __NR_inotify_init1	(__NR_Linux + 314)
 #define __NR_preadv		(__NR_Linux + 315)
 #define __NR_pwritev		(__NR_Linux + 316)
+#define __NR_rt_tgsigqueueinfo	(__NR_Linux + 317)
 
-#define __NR_Linux_syscalls	(__NR_pwritev + 1)
+#define __NR_Linux_syscalls	(__NR_rt_tgsigqueueinfo + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 6a6296148e5..83f8959ff65 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -413,8 +413,9 @@
 	ENTRY_SAME(dup3)
 	ENTRY_SAME(pipe2)
 	ENTRY_SAME(inotify_init1)
-	ENTRY_COMP(preadv)
+	ENTRY_COMP(preadv)		/* 315 */
 	ENTRY_COMP(pwritev)
+	ENTRY_COMP(rt_tgsigqueueinfo)
 
 	/* Nothing yet */
 
-- 
cgit v1.2.3


From c3301ab4fb64cf84321d35a8e94f68c94c816dc1 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 23 Jun 2009 11:47:07 -0400
Subject: parisc: remove dead code from sys_parisc32.c

Unless I'm totally missing something get_fd_set32/set_fd_set32 are
completely unused.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/kernel/sys_parisc32.c | 62 ---------------------------------------
 1 file changed, 62 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 1adb40c8166..92a0acaa0d1 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -174,68 +174,6 @@ asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
 	return ret;
 }
 
-/*** copied from mips64 ***/
-/*
- * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
- * 64-bit unsigned longs.
- */
-
-static inline int
-get_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-	if (ufdset) {
-		unsigned long odd;
-
-		if (!access_ok(VERIFY_WRITE, ufdset, n*sizeof(u32)))
-			return -EFAULT;
-
-		odd = n & 1UL;
-		n &= ~1UL;
-		while (n) {
-			unsigned long h, l;
-			__get_user(l, ufdset);
-			__get_user(h, ufdset+1);
-			ufdset += 2;
-			*fdset++ = h << 32 | l;
-			n -= 2;
-		}
-		if (odd)
-			__get_user(*fdset, ufdset);
-	} else {
-		/* Tricky, must clear full unsigned long in the
-		 * kernel fdset at the end, this makes sure that
-		 * actually happens.
-		 */
-		memset(fdset, 0, ((n + 1) & ~1)*sizeof(u32));
-	}
-	return 0;
-}
-
-static inline void
-set_fd_set32(unsigned long n, u32 *ufdset, unsigned long *fdset)
-{
-	unsigned long odd;
-	n = (n + 8*sizeof(u32) - 1) / (8*sizeof(u32));
-
-	if (!ufdset)
-		return;
-
-	odd = n & 1UL;
-	n &= ~1UL;
-	while (n) {
-		unsigned long h, l;
-		l = *fdset++;
-		h = l >> 32;
-		__put_user(l, ufdset);
-		__put_user(h, ufdset+1);
-		ufdset += 2;
-		n -= 2;
-	}
-	if (odd)
-		__put_user(*fdset, ufdset);
-}
-
 struct msgbuf32 {
     int mtype;
     char mtext[1];
-- 
cgit v1.2.3


From 20dbc9f724e02c26e30d89cf50e7ce259ab46da4 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Tue, 23 Jun 2009 11:51:43 -0400
Subject: parisc: fix compile warning in mm/init.c

arch/parisc/mm/init.c: In function 'free_initmem':
381: warning: passing argument 1 of 'memset' makes pointer from integer without a cast

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 6c5ea964647..b0831d9e35c 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -378,7 +378,7 @@ void free_initmem(void)
 	/* Attempt to catch anyone trying to execute code here
 	 * by filling the page with BRK insns.
 	 */
-	memset(init_begin, 0x00, init_end - init_begin);
+	memset((void *)init_begin, 0x00, init_end - init_begin);
 	flush_icache_range(init_begin, init_end);
 #endif
 	
-- 
cgit v1.2.3


From 64a0cdb026666cd9911fa045b863fb1f0f255dd8 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Tue, 23 Jun 2009 13:10:03 -0400
Subject: parisc: processor.c, fix bloated stack frame

The pa_pdc_cell struct can be kmalloc'd, so do that instead.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/kernel/processor.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 1ca69a808e3..c8fb61ed32f 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -120,22 +120,28 @@ static int __cpuinit processor_probe(struct parisc_device *dev)
 	if (is_pdc_pat()) {
 		ulong status;
 		unsigned long bytecnt;
-	        pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	        pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 #undef USE_PAT_CPUID
 #ifdef USE_PAT_CPUID
 		struct pdc_pat_cpu_num cpu_info;
 #endif
 
+		pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+		if (!pa_pdc_cell)
+			panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 		status = pdc_pat_cell_module(&bytecnt, dev->pcell_loc,
-			dev->mod_index, PA_VIEW, &pa_pdc_cell);
+			dev->mod_index, PA_VIEW, pa_pdc_cell);
 
 		BUG_ON(PDC_OK != status);
 
 		/* verify it's the same as what do_pat_inventory() found */
-		BUG_ON(dev->mod_info != pa_pdc_cell.mod_info);
-		BUG_ON(dev->pmod_loc != pa_pdc_cell.mod_location);
+		BUG_ON(dev->mod_info != pa_pdc_cell->mod_info);
+		BUG_ON(dev->pmod_loc != pa_pdc_cell->mod_location);
+
+		txn_addr = pa_pdc_cell->mod[0];   /* id_eid for IO sapic */
 
-		txn_addr = pa_pdc_cell.mod[0];   /* id_eid for IO sapic */
+		kfree(pa_pdc_cell);
 
 #ifdef USE_PAT_CPUID
 /* We need contiguous numbers for cpuid. Firmware's notion
-- 
cgit v1.2.3


From 0d56d1aa0e756f077b700420c54e1a52140e73b4 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Tue, 23 Jun 2009 13:11:22 -0400
Subject: parisc: inventory.c, fix bloated stack frame

The pa_pdc_cell struct can be kmalloc'd, so do that
instead.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/kernel/inventory.c | 41 ++++++++++++++++++++++++-----------------
 1 file changed, 24 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index bd1f7f1ff74..d228d823787 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -170,23 +170,27 @@ static void __init pagezero_memconfig(void)
 static int __init 
 pat_query_module(ulong pcell_loc, ulong mod_index)
 {
-	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
+	pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell;
 	unsigned long bytecnt;
 	unsigned long temp;	/* 64-bit scratch value */
 	long status;		/* PDC return value status */
 	struct parisc_device *dev;
 
+	pa_pdc_cell = kmalloc(sizeof (*pa_pdc_cell), GFP_KERNEL);
+	if (!pa_pdc_cell)
+		panic("couldn't allocate memory for PDC_PAT_CELL!");
+
 	/* return cell module (PA or Processor view) */
 	status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
-				     PA_VIEW, &pa_pdc_cell);
+				     PA_VIEW, pa_pdc_cell);
 
 	if (status != PDC_OK) {
 		/* no more cell modules or error */
 		return status;
 	}
 
-	temp = pa_pdc_cell.cba;
-	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
+	temp = pa_pdc_cell->cba;
+	dev = alloc_pa_dev(PAT_GET_CBA(temp), &(pa_pdc_cell->mod_path));
 	if (!dev) {
 		return PDC_OK;
 	}
@@ -203,8 +207,8 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 
 	/* save generic info returned from the call */
 	/* REVISIT: who is the consumer of this? not sure yet... */
-	dev->mod_info = pa_pdc_cell.mod_info;	/* pass to PAT_GET_ENTITY() */
-	dev->pmod_loc = pa_pdc_cell.mod_location;
+	dev->mod_info = pa_pdc_cell->mod_info;	/* pass to PAT_GET_ENTITY() */
+	dev->pmod_loc = pa_pdc_cell->mod_location;
 
 	register_parisc_device(dev);	/* advertise device */
 
@@ -216,14 +220,14 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 
 	case PAT_ENTITY_PROC:
 		printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
-			pa_pdc_cell.mod[0]);
+			pa_pdc_cell->mod[0]);
 		break;
 
 	case PAT_ENTITY_MEM:
 		printk(KERN_DEBUG 
 			"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
-			pa_pdc_cell.mod[0], pa_pdc_cell.mod[1], 
-			pa_pdc_cell.mod[2]);
+			pa_pdc_cell->mod[0], pa_pdc_cell->mod[1],
+			pa_pdc_cell->mod[2]);
 		break;
 	case PAT_ENTITY_CA:
 		printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
@@ -243,23 +247,26 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
  print_ranges:
 		pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
 				    IO_VIEW, &io_pdc_cell);
-		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
-		for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
+		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
+		for (i = 0; i < pa_pdc_cell->mod[1]; i++) {
 			printk(KERN_DEBUG 
 				"  PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, pa_pdc_cell.mod[2 + i * 3],	/* type */
-				pa_pdc_cell.mod[3 + i * 3],	/* start */
-				pa_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, pa_pdc_cell->mod[2 + i * 3],	/* type */
+				pa_pdc_cell->mod[3 + i * 3],	/* start */
+				pa_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 			printk(KERN_DEBUG 
 				"  IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n", 
-				i, io_pdc_cell.mod[2 + i * 3],	/* type */
-				io_pdc_cell.mod[3 + i * 3],	/* start */
-				io_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
+				i, io_pdc_cell->mod[2 + i * 3],	/* type */
+				io_pdc_cell->mod[3 + i * 3],	/* start */
+				io_pdc_cell->mod[4 + i * 3]);	/* finish (ie end) */
 		}
 		printk(KERN_DEBUG "\n");
 		break;
 	}
 #endif /* DEBUG_PAT */
+
+	kfree(pa_pdc_cell);
+
 	return PDC_OK;
 }
 
-- 
cgit v1.2.3


From 538e23615fe78b6da151ef136e3f7c6ad1fda2c1 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Tue, 23 Jun 2009 20:22:06 -0400
Subject: parisc: wire sys_perf_counter_open to sys_ni_syscall

Reserve a syscall slot for sys_perf_counter_open.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/unistd.h   | 3 ++-
 arch/parisc/kernel/syscall_table.S | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index 4e2aa0d1496..f3d3b8b012c 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -810,8 +810,9 @@
 #define __NR_preadv		(__NR_Linux + 315)
 #define __NR_pwritev		(__NR_Linux + 316)
 #define __NR_rt_tgsigqueueinfo	(__NR_Linux + 317)
+#define __NR_perf_counter_open	(__NR_Linux + 318)
 
-#define __NR_Linux_syscalls	(__NR_rt_tgsigqueueinfo + 1)
+#define __NR_Linux_syscalls	(__NR_perf_counter_open + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 83f8959ff65..0c83673a03a 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -416,6 +416,7 @@
 	ENTRY_COMP(preadv)		/* 315 */
 	ENTRY_COMP(pwritev)
 	ENTRY_COMP(rt_tgsigqueueinfo)
+	ENTRY_SAME(ni_syscall)
 
 	/* Nothing yet */
 
-- 
cgit v1.2.3


From abf1e11a0dcf5514139cb76ed8eb050107653abd Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Tue, 23 Jun 2009 21:32:18 -0400
Subject: parisc: add task_pt_regs macro

needed for perf_counters.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/include/asm/processor.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 9d64df8754b..9ce66e9d1c2 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -18,6 +18,7 @@
 #include <asm/types.h>
 #include <asm/system.h>
 #include <asm/percpu.h>
+
 #endif /* __ASSEMBLY__ */
 
 #define KERNEL_STACK_SIZE 	(4*PAGE_SIZE)
@@ -127,6 +128,8 @@ struct thread_struct {
 	unsigned long  flags;
 }; 
 
+#define task_pt_regs(tsk) ((struct pt_regs *)&((tsk)->thread.regs))
+
 /* Thread struct flags. */
 #define PARISC_UAC_NOPRINT	(1UL << 0)	/* see prctl and unaligned.c */
 #define PARISC_UAC_SIGBUS	(1UL << 1)
-- 
cgit v1.2.3


From 2d4618dce6a318ff4ec78dfe492cc3793015d540 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Tue, 23 Jun 2009 21:38:49 -0400
Subject: parisc: perf: wire up sys_perf_counter_open

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/Kconfig                    | 1 +
 arch/parisc/include/asm/perf_counter.h | 7 +++++++
 arch/parisc/kernel/syscall_table.S     | 2 +-
 3 files changed, 9 insertions(+), 1 deletion(-)
 create mode 100644 arch/parisc/include/asm/perf_counter.h

(limited to 'arch')

diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9038f39d9d7..c38bbc7af79 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,6 +16,7 @@ config PARISC
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
+	select HAVE_PERF_COUNTERS
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
new file mode 100644
index 00000000000..dc9e829f701
--- /dev/null
+++ b/arch/parisc/include/asm/perf_counter.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_COUNTER_H
+#define __ASM_PARISC_PERF_COUNTER_H
+
+/* parisc only supports software counters through this interface. */
+static inline void set_perf_counter_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 0c83673a03a..cf145eb026b 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -416,7 +416,7 @@
 	ENTRY_COMP(preadv)		/* 315 */
 	ENTRY_COMP(pwritev)
 	ENTRY_COMP(rt_tgsigqueueinfo)
-	ENTRY_SAME(ni_syscall)
+	ENTRY_SAME(perf_counter_open)
 
 	/* Nothing yet */
 
-- 
cgit v1.2.3


From 64daa4435a40aa1b7d0ece598ae783b89dda13ee Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@mcmartin.ca>
Date: Thu, 2 Jul 2009 13:10:29 -0400
Subject: parisc: use generic atomic64 on 32-bit

Somewhat redundant since our atomic_t uses hashed-locks on 32-bit
anyway... Maybe we can clean those up to be generic too someday.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
---
 arch/parisc/Kconfig              | 1 +
 arch/parisc/include/asm/atomic.h | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index c38bbc7af79..06f8d5b5b0f 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -17,6 +17,7 @@ config PARISC
 	select INIT_ALL_POSSIBLE
 	select BUG
 	select HAVE_PERF_COUNTERS
+	select GENERIC_ATOMIC64 if !64BIT
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
 	  in many of their workstations & servers (HP9000 700 and 800 series,
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 82e9688f658..8bc9e96699b 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -336,7 +336,11 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
-#endif /* CONFIG_64BIT */
+#else /* CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* !CONFIG_64BIT */
 
 #include <asm-generic/atomic-long.h>
 
-- 
cgit v1.2.3


From 47220f623c3216ca276bad517ed208ea2ffceaa2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 3 Jul 2009 13:08:28 +0900
Subject: sh: define PERF_COUNTER_INDEX_OFFSET.

Fixes up recent build breakage.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/perf_counter.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index 61c2b40c802..d8e6bb9c0cc 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -4,4 +4,6 @@
 /* SH only supports software counters through this interface. */
 static inline void set_perf_counter_pending(void) {}
 
+#define PERF_COUNTER_INDEX_OFFSET	0
+
 #endif /* __ASM_SH_PERF_COUNTER_H */
-- 
cgit v1.2.3


From 5c68b09900f04c3de55af43155435b9392f03844 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Mon, 22 Jun 2009 21:01:58 +0200
Subject: [ARM] pxa: correct I2CPWR clock for pxa3xx

In commit f23d4911319fd, the pwr-i2c device name changed due to the
newly introduced device table. This patch fixes the clock so the
driver's probe will succeed again.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/pxa3xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 6f678d93bf4..09b7b1a10ca 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
-- 
cgit v1.2.3


From 4aa78264d14bb0e87897acb90941c368248e20ce Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Fri, 19 Jun 2009 22:56:09 +0200
Subject: [ARM] pxa: use kzalloc() in pxa_init_gpio_chip()

As slab is available early now, use kzalloc() rather than
alloc_bootmem_low() in pxa_init_gpio_chip().

This removes the following boot time warning:

<4>------------[ cut here ]------------
<4>WARNING: at mm/bootmem.c:535 alloc_arch_preferred_bootmem+0x2c/0x54()
<d>Modules linked in:
[<c0029430>] (unwind_backtrace+0x0/0xdc) from [<c0036f64>] (warn_slowpath_common+0x4c/0x80)
[<c0036f64>] (warn_slowpath_common+0x4c/0x80) from [<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54)
[<c000ede0>] (alloc_arch_preferred_bootmem+0x2c/0x54) from [<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0)
[<c000f2e4>] (___alloc_bootmem_nopanic+0x34/0xd0) from [<c000f6e4>] (___alloc_bootmem+0xc/0x34)
[<c000f6e4>] (___alloc_bootmem+0xc/0x34) from [<c000cb20>] (pxa_init_gpio+0x48/0x228)
[<c000cb20>] (pxa_init_gpio+0x48/0x228) from [<c0009794>] (init_IRQ+0x34/0x44)
[<c0009794>] (init_IRQ+0x34/0x44) from [<c00089d4>] (start_kernel+0x144/0x264)
[<c00089d4>] (start_kernel+0x144/0x264) from [<a0008034>] (0xa0008034)
<4>---[ end trace 1b75b31a2719ed1c ]---

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/gpio.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index abc79d44aca..98548c6903a 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <mach/gpio.h>
 
@@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
 	struct pxa_gpio_chip *chips;
 
-	/* this is early, we have to use bootmem allocator, and we really
-	 * want this to be allocated dynamically for different 'gpio_end'
-	 */
-	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
 	if (chips == NULL) {
 		pr_err("%s: failed to allocate GPIO chips\n", __func__);
 		return -ENOMEM;
 	}
 
-	memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
 	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
 		struct gpio_chip *c = &chips[i].chip;
 
-- 
cgit v1.2.3


From c601a51af10f714292f42eab45fa8c9154dc1414 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Fri, 3 Jul 2009 16:16:54 +0900
Subject: sh: Use bootmem ontop of lmb

Rework the bootmem allocator to use the lmb framework.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig           |  1 +
 arch/sh/include/asm/lmb.h |  6 ++++
 arch/sh/kernel/setup.c    | 71 ++++++++++++++++++++++++++++++++++-------------
 3 files changed, 59 insertions(+), 19 deletions(-)
 create mode 100644 arch/sh/include/asm/lmb.h

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e2bdd7b94fd..0fb99b0eac5 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -10,6 +10,7 @@ config SUPERH
 	select EMBEDDED
 	select HAVE_CLK
 	select HAVE_IDE
+	select HAVE_LMB
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IOREMAP_PROT if MMU
diff --git a/arch/sh/include/asm/lmb.h b/arch/sh/include/asm/lmb.h
new file mode 100644
index 00000000000..9b437f657ff
--- /dev/null
+++ b/arch/sh/include/asm/lmb.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_LMB_H
+#define __ASM_SH_LMB_H
+
+#define LMB_REAL_LIMIT	0
+
+#endif /* __ASM_SH_LMB_H */
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index dd38338553e..ceb409bf774 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -30,6 +30,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/lmb.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -233,39 +234,45 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 void __init setup_bootmem_allocator(unsigned long free_pfn)
 {
 	unsigned long bootmap_size;
+	unsigned long bootmap_pages, bootmem_paddr;
+	u64 total_pages = (lmb_end_of_DRAM() - __MEMORY_START) >> PAGE_SHIFT;
+	int i;
+
+	bootmap_pages = bootmem_bootmap_pages(total_pages);
+
+	bootmem_paddr = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
 
 	/*
 	 * Find a proper area for the bootmem bitmap. After this
 	 * bootstrap step all allocations (until the page allocator
 	 * is intact) must be done via bootmem_alloc().
 	 */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn,
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+					 bootmem_paddr >> PAGE_SHIFT,
 					 min_low_pfn, max_low_pfn);
 
-	__add_active_range(0, min_low_pfn, max_low_pfn);
-	register_bootmem_low_pages();
-
-	node_set_online(0);
+	/* Add active regions with valid PFNs. */
+	for (i = 0; i < lmb.memory.cnt; i++) {
+		unsigned long start_pfn, end_pfn;
+		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		__add_active_range(0, start_pfn, end_pfn);
+	}
 
 	/*
-	 * Reserve the kernel text and
-	 * Reserve the bootmem bitmap. We do this in two steps (first step
-	 * was init_bootmem()), because this catches the (definitely buggy)
-	 * case of us accidentally initializing the bootmem allocator with
-	 * an invalid RAM area.
+	 * Add all physical memory to the bootmem map and mark each
+	 * area as present.
 	 */
-	reserve_bootmem(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
-			(PFN_PHYS(free_pfn) + bootmap_size + PAGE_SIZE - 1) -
-			(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET),
-			BOOTMEM_DEFAULT);
+	register_bootmem_low_pages();
 
-	/*
-	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
-	 */
-	if (CONFIG_ZERO_PAGE_OFFSET != 0)
-		reserve_bootmem(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET,
+	/* Reserve the sections we're already using. */
+	for (i = 0; i < lmb.reserved.cnt; i++)
+		reserve_bootmem(lmb.reserved.region[i].base,
+				lmb_size_bytes(&lmb.reserved, i),
 				BOOTMEM_DEFAULT);
 
+	node_set_online(0);
+
 	sparse_memory_present_with_active_regions(0);
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -296,12 +303,37 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
 static void __init setup_memory(void)
 {
 	unsigned long start_pfn;
+	u64 base = min_low_pfn << PAGE_SHIFT;
+	u64 size = (max_low_pfn << PAGE_SHIFT) - base;
 
 	/*
 	 * Partially used pages are not usable - thus
 	 * we are rounding upwards:
 	 */
 	start_pfn = PFN_UP(__pa(_end));
+
+	lmb_add(base, size);
+
+	/*
+	 * Reserve the kernel text and
+	 * Reserve the bootmem bitmap. We do this in two steps (first step
+	 * was init_bootmem()), because this catches the (definitely buggy)
+	 * case of us accidentally initializing the bootmem allocator with
+	 * an invalid RAM area.
+	 */
+	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+		    (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
+		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
+
+	/*
+	 * Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
+	 */
+	if (CONFIG_ZERO_PAGE_OFFSET != 0)
+		lmb_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+
+	lmb_analyze();
+	lmb_dump_all();
+
 	setup_bootmem_allocator(start_pfn);
 }
 #else
@@ -402,6 +434,7 @@ void __init setup_arch(char **cmdline_p)
 	nodes_clear(node_online_map);
 
 	/* Setup bootmem with available RAM */
+	lmb_init();
 	setup_memory();
 	sparse_init();
 
-- 
cgit v1.2.3


From bbf2a330d92c5afccfd17592ba9ccd50f41cf748 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 3 Jul 2009 00:08:26 +0200
Subject: x86: atomic64: The atomic64_t data type should be 8 bytes aligned on
 32-bit too

Locked instructions on two cache lines at once are painful. If
atomic64_t uses two cache lines, my test program is 10x slower.

The chance for that is significant: 4/32 or 12.5%.

Make sure an atomic64_t is 8 bytes aligned.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
[ changed it to __aligned(8) as per Andrew's suggestion ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/atomic_32.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 2503d4e64c2..ae0fbb5b057 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -250,7 +250,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 /* An 64bit atomic type */
 
 typedef struct {
-	unsigned long long counter;
+	unsigned long long __aligned(8) counter;
 } atomic64_t;
 
 #define ATOMIC64_INIT(val)	{ (val) }
-- 
cgit v1.2.3


From b7882b7c65abb00194bdb3d4a22d27d70fcc59ba Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 13:26:39 +0200
Subject: x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file

Linus noted that the atomic64_t primitives are all inlines
currently which is crazy because these functions have a large
register footprint anyway.

Move them to a separate file: arch/x86/lib/atomic64_32.c

Also, while at it, rename all uses of 'unsigned long long' to
the much shorter u64.

This makes the appearance of the prototypes a lot nicer - and
it also uncovered a few bugs where (yet unused) API variants
had 'long' as their return type instead of u64.

[ More intrusive changes are not yet done in this patch. ]

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/atomic_32.h | 137 ++++---------------------
 arch/x86/lib/Makefile            |   1 +
 arch/x86/lib/atomic64_32.c       | 216 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 237 insertions(+), 117 deletions(-)
 create mode 100644 arch/x86/lib/atomic64_32.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index ae0fbb5b057..311a43e47c0 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -250,7 +250,7 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 /* An 64bit atomic type */
 
 typedef struct {
-	unsigned long long __aligned(8) counter;
+	u64 __aligned(8) counter;
 } atomic64_t;
 
 #define ATOMIC64_INIT(val)	{ (val) }
@@ -264,31 +264,7 @@ typedef struct {
  */
 #define __atomic64_read(ptr)		((ptr)->counter)
 
-static inline unsigned long long
-cmpxchg8b(unsigned long long *ptr, unsigned long long old, unsigned long long new)
-{
-	asm volatile(
-
-		LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
-		     :		"=A" (old)
-
-		     : [ptr]	"D" (ptr),
-				"A" (old),
-				"b" (ll_low(new)),
-				"c" (ll_high(new))
-
-		     : "memory");
-
-	return old;
-}
-
-static inline unsigned long long
-atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
-		 unsigned long long new_val)
-{
-	return cmpxchg8b(&ptr->counter, old_val, new_val);
-}
+extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
 
 /**
  * atomic64_xchg - xchg atomic64 variable
@@ -298,18 +274,7 @@ atomic64_cmpxchg(atomic64_t *ptr, unsigned long long old_val,
  * Atomically xchgs the value of @ptr to @new_val and returns
  * the old value.
  */
-
-static inline unsigned long long
-atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
-{
-	unsigned long long old_val;
-
-	do {
-		old_val = atomic_read(ptr);
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
-	return old_val;
-}
+extern u64 atomic64_xchg(atomic64_t *ptr, u64 new_val);
 
 /**
  * atomic64_set - set atomic64 variable
@@ -318,10 +283,7 @@ atomic64_xchg(atomic64_t *ptr, unsigned long long new_val)
  *
  * Atomically sets the value of @ptr to @new_val.
  */
-static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
-{
-	atomic64_xchg(ptr, new_val);
-}
+extern void atomic64_set(atomic64_t *ptr, u64 new_val);
 
 /**
  * atomic64_read - read atomic64 variable
@@ -329,16 +291,7 @@ static inline void atomic64_set(atomic64_t *ptr, unsigned long long new_val)
  *
  * Atomically reads the value of @ptr and returns it.
  */
-static inline unsigned long long atomic64_read(atomic64_t *ptr)
-{
-	unsigned long long curr_val;
-
-	do {
-		curr_val = __atomic64_read(ptr);
-	} while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
-
-	return curr_val;
-}
+extern u64 atomic64_read(atomic64_t *ptr);
 
 /**
  * atomic64_add_return - add and return
@@ -347,34 +300,14 @@ static inline unsigned long long atomic64_read(atomic64_t *ptr)
  *
  * Atomically adds @delta to @ptr and returns @delta + *@ptr
  */
-static inline unsigned long long
-atomic64_add_return(unsigned long long delta, atomic64_t *ptr)
-{
-	unsigned long long old_val, new_val;
-
-	do {
-		old_val = atomic_read(ptr);
-		new_val = old_val + delta;
-
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
-
-	return new_val;
-}
-
-static inline long atomic64_sub_return(unsigned long long delta, atomic64_t *ptr)
-{
-	return atomic64_add_return(-delta, ptr);
-}
+extern u64 atomic64_add_return(u64 delta, atomic64_t *ptr);
 
-static inline long atomic64_inc_return(atomic64_t *ptr)
-{
-	return atomic64_add_return(1, ptr);
-}
-
-static inline long atomic64_dec_return(atomic64_t *ptr)
-{
-	return atomic64_sub_return(1, ptr);
-}
+/*
+ * Other variants with different arithmetic operators:
+ */
+extern u64 atomic64_sub_return(u64 delta, atomic64_t *ptr);
+extern u64 atomic64_inc_return(atomic64_t *ptr);
+extern u64 atomic64_dec_return(atomic64_t *ptr);
 
 /**
  * atomic64_add - add integer to atomic64 variable
@@ -383,10 +316,7 @@ static inline long atomic64_dec_return(atomic64_t *ptr)
  *
  * Atomically adds @delta to @ptr.
  */
-static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
-{
-	atomic64_add_return(delta, ptr);
-}
+extern void atomic64_add(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_sub - subtract the atomic64 variable
@@ -395,10 +325,7 @@ static inline void atomic64_add(unsigned long long delta, atomic64_t *ptr)
  *
  * Atomically subtracts @delta from @ptr.
  */
-static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
-{
-	atomic64_add(-delta, ptr);
-}
+extern void atomic64_sub(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_sub_and_test - subtract value from variable and test result
@@ -409,13 +336,7 @@ static inline void atomic64_sub(unsigned long long delta, atomic64_t *ptr)
  * true if the result is zero, or false for all
  * other cases.
  */
-static inline int
-atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
-{
-	unsigned long long old_val = atomic64_sub_return(delta, ptr);
-
-	return old_val == 0;
-}
+extern int atomic64_sub_and_test(u64 delta, atomic64_t *ptr);
 
 /**
  * atomic64_inc - increment atomic64 variable
@@ -423,10 +344,7 @@ atomic64_sub_and_test(unsigned long long delta, atomic64_t *ptr)
  *
  * Atomically increments @ptr by 1.
  */
-static inline void atomic64_inc(atomic64_t *ptr)
-{
-	atomic64_add(1, ptr);
-}
+extern void atomic64_inc(atomic64_t *ptr);
 
 /**
  * atomic64_dec - decrement atomic64 variable
@@ -434,10 +352,7 @@ static inline void atomic64_inc(atomic64_t *ptr)
  *
  * Atomically decrements @ptr by 1.
  */
-static inline void atomic64_dec(atomic64_t *ptr)
-{
-	atomic64_sub(1, ptr);
-}
+extern void atomic64_dec(atomic64_t *ptr);
 
 /**
  * atomic64_dec_and_test - decrement and test
@@ -447,10 +362,7 @@ static inline void atomic64_dec(atomic64_t *ptr)
  * returns true if the result is 0, or false for all other
  * cases.
  */
-static inline int atomic64_dec_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(1, ptr);
-}
+extern int atomic64_dec_and_test(atomic64_t *ptr);
 
 /**
  * atomic64_inc_and_test - increment and test
@@ -460,10 +372,7 @@ static inline int atomic64_dec_and_test(atomic64_t *ptr)
  * and returns true if the result is zero, or false for all
  * other cases.
  */
-static inline int atomic64_inc_and_test(atomic64_t *ptr)
-{
-	return atomic64_sub_and_test(-1, ptr);
-}
+extern int atomic64_inc_and_test(atomic64_t *ptr);
 
 /**
  * atomic64_add_negative - add and test if negative
@@ -474,13 +383,7 @@ static inline int atomic64_inc_and_test(atomic64_t *ptr)
  * if the result is negative, or false when
  * result is greater than or equal to zero.
  */
-static inline int
-atomic64_add_negative(unsigned long long delta, atomic64_t *ptr)
-{
-	long long old_val = atomic64_add_return(delta, ptr);
-
-	return old_val < 0;
-}
+extern int atomic64_add_negative(u64 delta, atomic64_t *ptr);
 
 #include <asm-generic/atomic-long.h>
 #endif /* _ASM_X86_ATOMIC_32_H */
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f9d35632666..c3c657c8bb8 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,6 +10,7 @@ lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 
 ifeq ($(CONFIG_X86_32),y)
+        lib-y += atomic64_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
         lib-y += semaphore_32.o string_32.o
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
new file mode 100644
index 00000000000..d21e725d3d8
--- /dev/null
+++ b/arch/x86/lib/atomic64_32.c
@@ -0,0 +1,216 @@
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/processor.h>
+#include <asm/cmpxchg.h>
+#include <asm/atomic.h>
+
+static inline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
+{
+	asm volatile(
+
+		LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
+
+		     :		"=A" (old)
+
+		     : [ptr]	"D" (ptr),
+				"A" (old),
+				"b" (ll_low(new)),
+				"c" (ll_high(new))
+
+		     : "memory");
+
+	return old;
+}
+
+u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
+{
+	return cmpxchg8b(&ptr->counter, old_val, new_val);
+}
+
+/**
+ * atomic64_xchg - xchg atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ * @new_val:  value to assign
+ *
+ * Atomically xchgs the value of @ptr to @new_val and returns
+ * the old value.
+ */
+
+u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
+{
+	u64 old_val;
+
+	do {
+		old_val = atomic_read(ptr);
+	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
+
+	return old_val;
+}
+
+/**
+ * atomic64_set - set atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ * @new_val:  value to assign
+ *
+ * Atomically sets the value of @ptr to @new_val.
+ */
+void atomic64_set(atomic64_t *ptr, u64 new_val)
+{
+	atomic64_xchg(ptr, new_val);
+}
+
+/**
+ * atomic64_read - read atomic64 variable
+ * @ptr:      pointer to type atomic64_t
+ *
+ * Atomically reads the value of @ptr and returns it.
+ */
+u64 atomic64_read(atomic64_t *ptr)
+{
+	u64 curr_val;
+
+	do {
+		curr_val = __atomic64_read(ptr);
+	} while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
+
+	return curr_val;
+}
+
+/**
+ * atomic64_add_return - add and return
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns @delta + *@ptr
+ */
+u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
+{
+	u64 old_val, new_val;
+
+	do {
+		old_val = atomic_read(ptr);
+		new_val = old_val + delta;
+
+	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
+
+	return new_val;
+}
+
+u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
+{
+	return atomic64_add_return(-delta, ptr);
+}
+
+u64 atomic64_inc_return(atomic64_t *ptr)
+{
+	return atomic64_add_return(1, ptr);
+}
+
+u64 atomic64_dec_return(atomic64_t *ptr)
+{
+	return atomic64_sub_return(1, ptr);
+}
+
+/**
+ * atomic64_add - add integer to atomic64 variable
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr.
+ */
+void atomic64_add(u64 delta, atomic64_t *ptr)
+{
+	atomic64_add_return(delta, ptr);
+}
+
+/**
+ * atomic64_sub - subtract the atomic64 variable
+ * @delta: integer value to subtract
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr.
+ */
+void atomic64_sub(u64 delta, atomic64_t *ptr)
+{
+	atomic64_add(-delta, ptr);
+}
+
+/**
+ * atomic64_sub_and_test - subtract value from variable and test result
+ * @delta: integer value to subtract
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically subtracts @delta from @ptr and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
+{
+	u64 old_val = atomic64_sub_return(delta, ptr);
+
+	return old_val == 0;
+}
+
+/**
+ * atomic64_inc - increment atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1.
+ */
+void atomic64_inc(atomic64_t *ptr)
+{
+	atomic64_add(1, ptr);
+}
+
+/**
+ * atomic64_dec - decrement atomic64 variable
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1.
+ */
+void atomic64_dec(atomic64_t *ptr)
+{
+	atomic64_sub(1, ptr);
+}
+
+/**
+ * atomic64_dec_and_test - decrement and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically decrements @ptr by 1 and
+ * returns true if the result is 0, or false for all other
+ * cases.
+ */
+int atomic64_dec_and_test(atomic64_t *ptr)
+{
+	return atomic64_sub_and_test(1, ptr);
+}
+
+/**
+ * atomic64_inc_and_test - increment and test
+ * @ptr: pointer to type atomic64_t
+ *
+ * Atomically increments @ptr by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+int atomic64_inc_and_test(atomic64_t *ptr)
+{
+	return atomic64_sub_and_test(-1, ptr);
+}
+
+/**
+ * atomic64_add_negative - add and test if negative
+ * @delta: integer value to add
+ * @ptr:   pointer to type atomic64_t
+ *
+ * Atomically adds @delta to @ptr and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+int atomic64_add_negative(u64 delta, atomic64_t *ptr)
+{
+	long long old_val = atomic64_add_return(delta, ptr);
+
+	return old_val < 0;
+}
-- 
cgit v1.2.3


From aacf682fd8c66b57383c407eecd9d4a28264ee91 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 3 Jul 2009 12:14:27 +0200
Subject: x86: atomic64: Improve atomic64_read()

Linus noticed that the 32-bit version of atomic64_read() was
being overly complex with re-reading the value and doing a
retry loop over that.

Instead we can just rely on cmpxchg8b returning either the new
value or returning the current value.

We can use any 'old' value, which will be faster as it can be
loaded via immediates. Using some value that is not equal to
the real value in memory the instruction gets faster.

This also has the advantage that the CPU could avoid dirtying
the cacheline.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/atomic64_32.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index d21e725d3d8..afa5d444918 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -67,13 +67,9 @@ void atomic64_set(atomic64_t *ptr, u64 new_val)
  */
 u64 atomic64_read(atomic64_t *ptr)
 {
-	u64 curr_val;
+	u64 old = 1LL << 32;
 
-	do {
-		curr_val = __atomic64_read(ptr);
-	} while (atomic64_cmpxchg(ptr, curr_val, curr_val) != curr_val);
-
-	return curr_val;
+	return cmpxchg8b(&ptr->counter, old, old);
 }
 
 /**
-- 
cgit v1.2.3


From 69237f94e65d3d7f539f1adb98ef68685c595004 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 3 Jul 2009 13:26:41 +0200
Subject: x86: atomic64: Improve cmpxchg8b()

Rewrite cmpxchg8b() to not use %edi register but a generic "+m"
constraint, to increase compiler freedom in code generation and
possibly better code.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/atomic64_32.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index afa5d444918..5fc1e2caa54 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -6,19 +6,14 @@
 
 static inline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
 {
-	asm volatile(
-
-		LOCK_PREFIX "cmpxchg8b (%[ptr])\n"
-
-		     :		"=A" (old)
-
-		     : [ptr]	"D" (ptr),
-				"A" (old),
-				"b" (ll_low(new)),
-				"c" (ll_high(new))
-
-		     : "memory");
+	u32 low = new;
+	u32 high = new >> 32;
 
+	asm volatile(
+		LOCK_PREFIX "cmpxchg8b %1\n"
+		     : "+A" (old), "+m" (*ptr)
+		     :  "b" (low),  "c" (high)
+		     );
 	return old;
 }
 
-- 
cgit v1.2.3


From 824975ef190e7dcb77718d1cc2cb53769b16d918 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 12:39:07 +0200
Subject: x86: atomic64: Improve atomic64_add_return()

Linus noted (based on Eric Dumazet's numbers) that we would
probably be better off not trying an atomic_read() in
atomic64_add_return() but intead intentionally let the first
cmpxchg8b fail - to get a cache-friendly 'give me ownership
of this cacheline' transaction. That can then be followed
by the real cmpxchg8b which sets the value local to the CPU.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/atomic64_32.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index 5fc1e2caa54..61959627e1e 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -76,13 +76,22 @@ u64 atomic64_read(atomic64_t *ptr)
  */
 u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
 {
-	u64 old_val, new_val;
+	/*
+	 * Try first with a (probably incorrect) assumption about
+	 * what we have there. We'll do two loops most likely,
+	 * but we'll get an ownership MESI transaction straight away
+	 * instead of a read transaction followed by a
+	 * flush-for-ownership transaction:
+	 */
+	u64 old_val, new_val, real_val = 1ULL << 32;
 
 	do {
-		old_val = atomic_read(ptr);
+		old_val = real_val;
 		new_val = old_val + delta;
 
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
+		real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+	} while (real_val != old_val);
 
 	return new_val;
 }
-- 
cgit v1.2.3


From 3ac805d2afd3fa4a07cb5bcf352fd7fa83f28935 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 12:51:19 +0200
Subject: x86: atomic64: Reduce size of functions

cmpxchg8b is a huge instruction in terms of register footprint,
we almost never want to inline it, not even within the same
code module.

GCC 4.3 still messes up for two functions, under-judging the
true cost of this instruction - so annotate two key functions
to reduce the bloat:

arch/x86/lib/atomic64_32.o:

   text	   data	    bss	    dec	    hex	filename
   1763	      0	      0	   1763	    6e3	atomic64_32.o.before
    435	      0	      0	    435	    1b3	atomic64_32.o.after

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/atomic64_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index 61959627e1e..a910238a776 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -4,7 +4,7 @@
 #include <asm/cmpxchg.h>
 #include <asm/atomic.h>
 
-static inline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
+static noinline u64 cmpxchg8b(u64 *ptr, u64 old, u64 new)
 {
 	u32 low = new;
 	u32 high = new >> 32;
@@ -74,7 +74,7 @@ u64 atomic64_read(atomic64_t *ptr)
  *
  * Atomically adds @delta to @ptr and returns @delta + *@ptr
  */
-u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
+noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
 {
 	/*
 	 * Try first with a (probably incorrect) assumption about
-- 
cgit v1.2.3


From 3217120873598533234b6dedda9c371ce30001d0 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 13:06:01 +0200
Subject: x86: atomic64: Make atomic_read() type-safe
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Linus noticed that atomic64_xchg() uses atomic_read(), which
happens to work because atomic_read() is a macro so the
.counter value gets u64-read on 32-bit too - but this is really
bogus and serious bugs are waiting to happen.

Change atomic_read() to be a type-safe inline, and this exposes
the atomic64 bogosity as well:

  arch/x86/lib/atomic64_32.c: In function ‘atomic64_xchg’:
  arch/x86/lib/atomic64_32.c:39: warning: passing argument 1 of ‘atomic_read’ from incompatible pointer type

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/atomic_32.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index 311a43e47c0..b551bb1ae3c 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -19,7 +19,10 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic_set - set atomic variable
-- 
cgit v1.2.3


From 199e23780a7e75c63a9e3d1108804e3af450ea3e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 13:02:39 +0200
Subject: x86: atomic64: Fix unclean type use in atomic64_xchg()

Linus noticed that atomic64_xchg() uses atomic_read(), which
happens to work because atomic_read() is a macro so the
.counter value gets u64-read on 32-bit too - but this is really
bogus and serious bugs are waiting to happen.

Fix atomic64_xchg() to use __atomic64_read() instead.

No code changed:

arch/x86/lib/atomic64_32.o:

   text	   data	    bss	    dec	    hex	filename
    435	      0	      0	    435	    1b3	atomic64_32.o.before
    435	      0	      0	    435	    1b3	atomic64_32.o.after

md5:
   bd8ab95e69c93518578bfaf0ea3be4d9  atomic64_32.o.before.asm
   bd8ab95e69c93518578bfaf0ea3be4d9  atomic64_32.o.after.asm

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/atomic64_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index a910238a776..fd28fd3fb74 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -36,7 +36,7 @@ u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
 	u64 old_val;
 
 	do {
-		old_val = atomic_read(ptr);
+		old_val = __atomic64_read(ptr);
 	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
 
 	return old_val;
-- 
cgit v1.2.3


From 12b9d7ccb841805e347fec8f733f368f43ddba40 Mon Sep 17 00:00:00 2001
From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Date: Wed, 1 Jul 2009 17:37:22 -0400
Subject: x86: Fix fixmap page order for FIX_TEXT_POKE0,1

Masami reported:

> Since the fixmap pages are assigned higher address to lower,
> text_poke() has to use it with inverted order (FIX_TEXT_POKE1
> to FIX_TEXT_POKE0).

I prefer to just invert the order of the fixmap declaration.
It's simpler and more straightforward.

Backward fixmaps seems to be used by both x86 32 and 64.

It's really rare but a nasty bug, because it only hurts when
instructions to patch are crossing a page boundary. If this
happens, the fixmap write accesses will spill on the following
fixmap, which may very well crash the system. And this does not
crash the system, it could leave illegal instructions in place.
Thanks Masami for finding this.

It seems to have crept into the 2.6.30-rc series, so this calls
for a -stable inclusion.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090701213722.GH19926@Krystal>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/fixmap.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 3eb0f79a532..7b2d71df39a 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -111,8 +111,8 @@ enum fixed_addresses {
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
-	FIX_TEXT_POKE0,	/* reserve 2 pages for text_poke() */
-	FIX_TEXT_POKE1,
+	FIX_TEXT_POKE1,	/* reserve 2 pages for text_poke() */
+	FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
 	__end_of_permanent_fixed_addresses,
 	/*
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
-- 
cgit v1.2.3


From 3fd382cedfb4fb742a8cc17ba15288ec03131db1 Mon Sep 17 00:00:00 2001
From: Mike Galbraith <efault@gmx.de>
Date: Thu, 2 Jul 2009 07:27:20 +0200
Subject: x86: Add missing annotation to
 arch/x86/lib/copy_user_64.S::copy_to_user

While examining symbol generation in perf_counter tools, I
noticed that copy_to_user() had no size in vmlinux's symtab.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <1246512440.13293.3.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/copy_user_64.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index f118c110af3..6ba0f7bb85e 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -75,6 +75,7 @@ ENTRY(copy_to_user)
 	jae bad_to_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
+ENDPROC(copy_to_user)
 
 /* Standard copy_from_user with segment limit checking */
 ENTRY(copy_from_user)
-- 
cgit v1.2.3


From d3ac88157c1e9153f37cd2b9313117ae11735063 Mon Sep 17 00:00:00 2001
From: Rakib Mullick <rakib.mullick@gmail.com>
Date: Thu, 2 Jul 2009 11:40:36 +0600
Subject: x86, kvm: Fix section mismatches in kvm.c

The function paravirt_ops_setup() has been refering the
variable no_timer_check, which is a __initdata. Thus generates
the following warning. paravirt_ops_setup() function is called
from kvm_guest_init() which is a __init function. So to fix
this we mark paravirt_ops_setup as __init.

The sections-check output that warned us about this was:

   LD      arch/x86/built-in.o
  WARNING: arch/x86/built-in.o(.text+0x166ce): Section mismatch in
  reference from the function paravirt_ops_setup() to the variable
  .init.data:no_timer_check
  The function paravirt_ops_setup() references
  the variable __initdata no_timer_check.
  This is often because paravirt_ops_setup lacks a __initdata
  annotation or the annotation of no_timer_check is wrong.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Acked-by: Avi Kivity <avi@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <b9df5fa10907012240y356427b8ta4bd07f0efc6a049@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/kvm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a78ecad0c90..c664d515f61 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -200,7 +200,7 @@ static void kvm_leave_lazy_mmu(void)
 	state->mode = paravirt_get_lazy_mode();
 }
 
-static void paravirt_ops_setup(void)
+static void __init paravirt_ops_setup(void)
 {
 	pv_info.name = "KVM";
 	pv_info.paravirt_enabled = 1;
-- 
cgit v1.2.3


From 23d0cd8e718723f1ddda37637bc6b7c34caec64a Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Thu, 2 Jul 2009 22:33:59 +0530
Subject: x86: Remove unused variable disable_x2apic

setup_nox2apic() is writing 1 to disable_x2apic but no one is reading it.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1246554239.2242.27.camel@jaswinder.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 8c7c042ecad..0a1c2830ec6 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -140,7 +140,6 @@ int x2apic_mode;
 #ifdef CONFIG_X86_X2APIC
 /* x2apic enabled before OS handover */
 static int x2apic_preenabled;
-static int disable_x2apic;
 static __init int setup_nox2apic(char *str)
 {
 	if (x2apic_enabled()) {
@@ -149,7 +148,6 @@ static __init int setup_nox2apic(char *str)
 		return 0;
 	}
 
-	disable_x2apic = 1;
 	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
 	return 0;
 }
-- 
cgit v1.2.3


From c7210e1ff8a95a0a6dba0d04a95b3ddd9d165fab Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Thu, 2 Jul 2009 22:35:35 +0530
Subject: x86: Remove unused function lapic_watchdog_ok()

lapic_watchdog_ok() is a global function but no one is using it.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1246554335.2242.29.camel@jaswinder.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/nmi.h             | 1 -
 arch/x86/kernel/cpu/perfctr-watchdog.c | 5 -----
 2 files changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c9726440993..c86e5ed4af5 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -72,7 +72,6 @@ void lapic_watchdog_stop(void);
 int lapic_watchdog_init(unsigned nmi_hz);
 int lapic_wd_event(unsigned nmi_hz);
 unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
 void disable_lapic_nmi_watchdog(void);
 void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6205b..e60ed740d2b 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -803,8 +803,3 @@ int __kprobes lapic_wd_event(unsigned nmi_hz)
 	wd_ops->rearm(wd, nmi_hz);
 	return 1;
 }
-
-int lapic_watchdog_ok(void)
-{
-	return wd_ops != NULL;
-}
-- 
cgit v1.2.3


From 8e049ef054f1cc765f05f13e1396bb9a17c19e66 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 2 Jul 2009 08:57:12 +1000
Subject: x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP

Occasionally we get bugs where atomic_read or atomic_set are
used on atomic64_t variables or vice versa.  These bugs don't
generate warnings on x86 because atomic_read and atomic_set are
coded as macros rather than C functions, so we don't get any
type-checking on their arguments; similarly for atomic64_read
and atomic64_set in 64-bit kernels.

This converts them to C functions so that the arguments are
type-checked and bugs like this will get caught more easily. It
also converts atomic_cmpxchg and atomic_xchg, and
atomic64_cmpxchg and atomic64_xchg on 64-bit, so we get
type-checking on their arguments too.

Compiling a typical 64-bit x86 config, this generates no new
warnings, and the vmlinux text is 86 bytes smaller.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/atomic_32.h | 16 ++++++++++++---
 arch/x86/include/asm/atomic_64.h | 42 ++++++++++++++++++++++++++++++++--------
 2 files changed, 47 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index b551bb1ae3c..aa045deb2e7 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -31,7 +31,10 @@ static inline int atomic_read(const atomic_t *v)
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic_set(v, i)	(((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic_add - add integer to atomic variable
@@ -203,8 +206,15 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	return atomic_add_return(-i, v);
 }
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+	return xchg(&v->counter, new);
+}
 
 /**
  * atomic_add_unless - add unless the number is already a given value
diff --git a/arch/x86/include/asm/atomic_64.h b/arch/x86/include/asm/atomic_64.h
index 0d636022000..d605dc268e7 100644
--- a/arch/x86/include/asm/atomic_64.h
+++ b/arch/x86/include/asm/atomic_64.h
@@ -18,7 +18,10 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+static inline int atomic_read(const atomic_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic_set - set atomic variable
@@ -27,7 +30,10 @@
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic_set(v, i)		(((v)->counter) = (i))
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic_add - add integer to atomic variable
@@ -192,7 +198,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
  * Atomically reads the value of @v.
  * Doesn't imply a read memory barrier.
  */
-#define atomic64_read(v)		((v)->counter)
+static inline long atomic64_read(const atomic64_t *v)
+{
+	return v->counter;
+}
 
 /**
  * atomic64_set - set atomic64 variable
@@ -201,7 +210,10 @@ static inline int atomic_sub_return(int i, atomic_t *v)
  *
  * Atomically sets the value of @v to @i.
  */
-#define atomic64_set(v, i)		(((v)->counter) = (i))
+static inline void atomic64_set(atomic64_t *v, long i)
+{
+	v->counter = i;
+}
 
 /**
  * atomic64_add - add integer to atomic64 variable
@@ -355,11 +367,25 @@ static inline long atomic64_sub_return(long i, atomic64_t *v)
 #define atomic64_inc_return(v)  (atomic64_add_return(1, (v)))
 #define atomic64_dec_return(v)  (atomic64_sub_return(1, (v)))
 
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+static inline long atomic64_cmpxchg(atomic64_t *v, long old, long new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic64_xchg(atomic64_t *v, long new)
+{
+	return xchg(&v->counter, new);
+}
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
+static inline long atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	return cmpxchg(&v->counter, old, new);
+}
+
+static inline long atomic_xchg(atomic_t *v, int new)
+{
+	return xchg(&v->counter, new);
+}
 
 /**
  * atomic_add_unless - add unless the number is a given value
-- 
cgit v1.2.3


From 67d7178f8fc64b7f68d7dd8a1b21dfa0d42c220c Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 3 Jul 2009 13:23:02 +0200
Subject: x86: atomic64: Improve atomic64_read()

Optimize atomic64_read() as a special open-coded
cmpxchg8b variant. This generates nicer code:

arch/x86/lib/atomic64_32.o:

   text	   data	    bss	    dec	    hex	filename
    435	      0	      0	    435	    1b3	atomic64_32.o.before
    431	      0	      0	    431	    1af	atomic64_32.o.after

md5:
   bd8ab95e69c93518578bfaf0ea3be4d9  atomic64_32.o.before.asm
   2bdfd4bd1f6b7b61b7fc127aef90ce3b  atomic64_32.o.after.asm

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907021653030.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/atomic64_32.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index fd28fd3fb74..cd11803f944 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -62,9 +62,17 @@ void atomic64_set(atomic64_t *ptr, u64 new_val)
  */
 u64 atomic64_read(atomic64_t *ptr)
 {
-	u64 old = 1LL << 32;
+	u64 res;
 
-	return cmpxchg8b(&ptr->counter, old, old);
+	asm volatile(
+		"mov %%ebx, %%eax\n\t"
+		"mov %%ecx, %%edx\n\t"
+		LOCK_PREFIX "cmpxchg8b %1\n"
+			: "+A" (res)
+			: "m" (*ptr)
+		);
+
+	return res;
 }
 
 /**
-- 
cgit v1.2.3


From 7ca5dc145bc7daddd8aed8bbda46b74af9cebefc Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Wed, 24 Jun 2009 11:12:57 +0200
Subject: MIPS: Add support for Texas Instruments AR7 System-on-a-Chip

This patch adds support for the Texas Instruments AR7 System-on-a-Chip.
It supports the TNETD7100, 7200 and 7300 versions of the SoC.

Signed-off-by: Matteo Croce <matteo@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Eugene Konev <ejka@openwrt.org>
Signed-off-by: Nicolas Thill <nico@openwrt.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                       |   20 +
 arch/mips/Makefile                      |    7 +
 arch/mips/ar7/Makefile                  |   10 +
 arch/mips/ar7/clock.c                   |  440 ++++++++++++
 arch/mips/ar7/gpio.c                    |   48 ++
 arch/mips/ar7/irq.c                     |  176 +++++
 arch/mips/ar7/memory.c                  |   72 ++
 arch/mips/ar7/platform.c                |  555 +++++++++++++++
 arch/mips/ar7/prom.c                    |  297 ++++++++
 arch/mips/ar7/setup.c                   |   94 +++
 arch/mips/ar7/time.c                    |   30 +
 arch/mips/configs/ar7_defconfig         | 1182 +++++++++++++++++++++++++++++++
 arch/mips/include/asm/mach-ar7/ar7.h    |  178 +++++
 arch/mips/include/asm/mach-ar7/gpio.h   |  110 +++
 arch/mips/include/asm/mach-ar7/irq.h    |   16 +
 arch/mips/include/asm/mach-ar7/prom.h   |   25 +
 arch/mips/include/asm/mach-ar7/spaces.h |   22 +
 arch/mips/include/asm/mach-ar7/war.h    |   25 +
 18 files changed, 3307 insertions(+)
 create mode 100644 arch/mips/ar7/Makefile
 create mode 100644 arch/mips/ar7/clock.c
 create mode 100644 arch/mips/ar7/gpio.c
 create mode 100644 arch/mips/ar7/irq.c
 create mode 100644 arch/mips/ar7/memory.c
 create mode 100644 arch/mips/ar7/platform.c
 create mode 100644 arch/mips/ar7/prom.c
 create mode 100644 arch/mips/ar7/setup.c
 create mode 100644 arch/mips/ar7/time.c
 create mode 100644 arch/mips/configs/ar7_defconfig
 create mode 100644 arch/mips/include/asm/mach-ar7/ar7.h
 create mode 100644 arch/mips/include/asm/mach-ar7/gpio.h
 create mode 100644 arch/mips/include/asm/mach-ar7/irq.h
 create mode 100644 arch/mips/include/asm/mach-ar7/prom.h
 create mode 100644 arch/mips/include/asm/mach-ar7/spaces.h
 create mode 100644 arch/mips/include/asm/mach-ar7/war.h

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 8c4be1f301c..b0e55113633 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -22,6 +22,26 @@ choice
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
 
+config AR7
+	bool "Texas Instruments AR7"
+	select BOOT_ELF32
+	select DMA_NONCOHERENT
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select NO_EXCEPT_FILL
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select GENERIC_GPIO
+	select GCD
+	select VLYNQ
+	help
+	  Support for the Texas Instruments AR7 System-on-a-Chip
+	  family: TNETD7100, 7200 and 7300.
+
 config BASLER_EXCITE
 	bool "Basler eXcite smart camera"
 	select CEVT_R4K
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 807572a6a4d..861da514a46 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -172,6 +172,13 @@ libs-y				+= arch/mips/fw/lib/
 # Board-dependent options and extra files
 #
 
+#
+# Texas Instruments AR7
+#
+core-$(CONFIG_AR7)		+= arch/mips/ar7/
+cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7)		+= 0xffffffff94100000
+
 #
 # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
 #
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
new file mode 100644
index 00000000000..7435e44b396
--- /dev/null
+++ b/arch/mips/ar7/Makefile
@@ -0,0 +1,10 @@
+
+obj-y := \
+	prom.o \
+	setup.o \
+	memory.o \
+	irq.o \
+	time.o \
+	platform.o \
+	gpio.o \
+	clock.o
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
new file mode 100644
index 00000000000..27dc6663f2f
--- /dev/null
+++ b/arch/mips/ar7/clock.c
@@ -0,0 +1,440 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gcd.h>
+#include <linux/io.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define BOOT_PLL_SOURCE_MASK	0x3
+#define CPU_PLL_SOURCE_SHIFT	16
+#define BUS_PLL_SOURCE_SHIFT	14
+#define USB_PLL_SOURCE_SHIFT	18
+#define DSP_PLL_SOURCE_SHIFT	22
+#define BOOT_PLL_SOURCE_AFE	0
+#define BOOT_PLL_SOURCE_BUS	0
+#define BOOT_PLL_SOURCE_REF	1
+#define BOOT_PLL_SOURCE_XTAL	2
+#define BOOT_PLL_SOURCE_CPU	3
+#define BOOT_PLL_BYPASS		0x00000020
+#define BOOT_PLL_ASYNC_MODE	0x02000000
+#define BOOT_PLL_2TO1_MODE	0x00008000
+
+#define TNETD7200_CLOCK_ID_CPU	0
+#define TNETD7200_CLOCK_ID_DSP	1
+#define TNETD7200_CLOCK_ID_USB	2
+
+#define TNETD7200_DEF_CPU_CLK	211000000
+#define TNETD7200_DEF_DSP_CLK	125000000
+#define TNETD7200_DEF_USB_CLK	48000000
+
+struct tnetd7300_clock {
+	u32 ctrl;
+#define PREDIV_MASK	0x001f0000
+#define PREDIV_SHIFT	16
+#define POSTDIV_MASK	0x0000001f
+	u32 unused1[3];
+	u32 pll;
+#define MUL_MASK	0x0000f000
+#define MUL_SHIFT	12
+#define PLL_MODE_MASK	0x00000001
+#define PLL_NDIV	0x00000800
+#define PLL_DIV		0x00000002
+#define PLL_STATUS	0x00000001
+	u32 unused2[3];
+};
+
+struct tnetd7300_clocks {
+	struct tnetd7300_clock bus;
+	struct tnetd7300_clock cpu;
+	struct tnetd7300_clock usb;
+	struct tnetd7300_clock dsp;
+};
+
+struct tnetd7200_clock {
+	u32 ctrl;
+	u32 unused1[3];
+#define DIVISOR_ENABLE_MASK 0x00008000
+	u32 mul;
+	u32 prediv;
+	u32 postdiv;
+	u32 postdiv2;
+	u32 unused2[6];
+	u32 cmd;
+	u32 status;
+	u32 cmden;
+	u32 padding[15];
+};
+
+struct tnetd7200_clocks {
+	struct tnetd7200_clock cpu;
+	struct tnetd7200_clock dsp;
+	struct tnetd7200_clock usb;
+};
+
+int ar7_cpu_clock = 150000000;
+EXPORT_SYMBOL(ar7_cpu_clock);
+int ar7_bus_clock = 125000000;
+EXPORT_SYMBOL(ar7_bus_clock);
+int ar7_dsp_clock;
+EXPORT_SYMBOL(ar7_dsp_clock);
+
+static void approximate(int base, int target, int *prediv,
+			int *postdiv, int *mul)
+{
+	int i, j, k, freq, res = target;
+	for (i = 1; i <= 16; i++)
+		for (j = 1; j <= 32; j++)
+			for (k = 1; k <= 32; k++) {
+				freq = abs(base / j * i / k - target);
+				if (freq < res) {
+					res = freq;
+					*mul = i;
+					*prediv = j;
+					*postdiv = k;
+				}
+			}
+}
+
+static void calculate(int base, int target, int *prediv, int *postdiv,
+	int *mul)
+{
+	int tmp_gcd, tmp_base, tmp_freq;
+
+	for (*prediv = 1; *prediv <= 32; (*prediv)++) {
+		tmp_base = base / *prediv;
+		tmp_gcd = gcd(target, tmp_base);
+		*mul = target / tmp_gcd;
+		*postdiv = tmp_base / tmp_gcd;
+		if ((*mul < 1) || (*mul >= 16))
+			continue;
+		if ((*postdiv > 0) & (*postdiv <= 32))
+			break;
+	}
+
+	if (base / *prediv * *mul / *postdiv != target) {
+		approximate(base, target, prediv, postdiv, mul);
+		tmp_freq = base / *prediv * *mul / *postdiv;
+		printk(KERN_WARNING
+		       "Adjusted requested frequency %d to %d\n",
+		       target, tmp_freq);
+	}
+
+	printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n",
+	       *prediv, *postdiv, *mul);
+}
+
+static int tnetd7300_dsp_clock(void)
+{
+	u32 didr1, didr2;
+	u8 rev = ar7_chip_rev();
+	didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18));
+	didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c));
+	if (didr2 & (1 << 23))
+		return 0;
+	if ((rev >= 0x23) && (rev != 0x57))
+		return 250000000;
+	if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22))
+	    > 4208000)
+		return 250000000;
+	return 0;
+}
+
+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 bus_clock)
+{
+	int product;
+	int base_clock = AR7_REF_CLOCK;
+	u32 ctrl = readl(&clock->ctrl);
+	u32 pll = readl(&clock->pll);
+	int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1;
+	int postdiv = (ctrl & POSTDIV_MASK) + 1;
+	int divisor = prediv * postdiv;
+	int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base_clock / divisor;
+
+	if ((pll & PLL_MODE_MASK) == 0)
+		return (base_clock >> (mul / 16 + 1)) / divisor;
+
+	if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) {
+		product = (mul & 1) ?
+			(base_clock * mul) >> 1 :
+			(base_clock * (mul - 1)) >> 2;
+		return product / divisor;
+	}
+
+	if (mul == 16)
+		return base_clock / divisor;
+
+	return base_clock * mul / divisor;
+}
+
+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
+	u32 *bootcr, u32 frequency)
+{
+	int prediv, postdiv, mul;
+	int base_clock = ar7_bus_clock;
+
+	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
+	case BOOT_PLL_SOURCE_BUS:
+		base_clock = ar7_bus_clock;
+		break;
+	case BOOT_PLL_SOURCE_REF:
+		base_clock = AR7_REF_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_XTAL:
+		base_clock = AR7_XTAL_CLOCK;
+		break;
+	case BOOT_PLL_SOURCE_CPU:
+		base_clock = ar7_cpu_clock;
+		break;
+	}
+
+	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
+
+	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
+	msleep(1);
+	writel(4, &clock->pll);
+	while (readl(&clock->pll) & PLL_STATUS)
+		;
+	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
+	msleep(75);
+}
+
+static void __init tnetd7300_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7300_clocks *clocks =
+					ioremap_nocache(UR8_REGS_CLOCKS,
+					sizeof(struct tnetd7300_clocks));
+
+	ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+		&clocks->bus, bootcr, AR7_AFE_CLOCK);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+			&clocks->cpu, bootcr, AR7_AFE_CLOCK);
+	else
+		ar7_cpu_clock = ar7_bus_clock;
+
+	if (ar7_dsp_clock == 250000000)
+		tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
+			bootcr, ar7_dsp_clock);
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
+	u32 *bootcr, u32 bus_clock)
+{
+	int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
+		((readl(&clock->postdiv) & 0x1f) + 1);
+
+	if (*bootcr & BOOT_PLL_BYPASS)
+		return base / divisor;
+
+	return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
+}
+
+
+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
+	int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
+{
+	printk(KERN_INFO
+		"Clocks: base = %d, frequency = %u, prediv = %d, "
+		"postdiv = %d, postdiv2 = %d, mul = %d\n",
+		base, frequency, prediv, postdiv, postdiv2, mul);
+
+	writel(0, &clock->ctrl);
+	writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv);
+	writel((mul - 1) & 0xF, &clock->mul);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2);
+
+	writel(readl(&clock->cmden) | 1, &clock->cmden);
+	writel(readl(&clock->cmd) | 1, &clock->cmd);
+
+	while (readl(&clock->status) & 0x1)
+		; /* nop */
+
+	writel(readl(&clock->ctrl) | 1, &clock->ctrl);
+}
+
+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr)
+{
+	if (*bootcr & BOOT_PLL_ASYNC_MODE)
+		/* Async */
+		switch (clock_id) {
+		case TNETD7200_CLOCK_ID_DSP:
+			return AR7_REF_CLOCK;
+		default:
+			return AR7_AFE_CLOCK;
+		}
+	else
+		/* Sync */
+		if (*bootcr & BOOT_PLL_2TO1_MODE)
+			/* 2:1 */
+			switch (clock_id) {
+			case TNETD7200_CLOCK_ID_DSP:
+				return AR7_REF_CLOCK;
+			default:
+				return AR7_AFE_CLOCK;
+			}
+		else
+			/* 1:1 */
+			return AR7_REF_CLOCK;
+}
+
+
+static void __init tnetd7200_init_clocks(void)
+{
+	u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+	struct tnetd7200_clocks *clocks =
+					ioremap_nocache(AR7_REGS_CLOCKS,
+					sizeof(struct tnetd7200_clocks));
+	int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv;
+	int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv;
+	int usb_base, usb_mul, usb_prediv, usb_postdiv;
+
+	cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr);
+	dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr);
+
+	if (*bootcr & BOOT_PLL_ASYNC_MODE) {
+		printk(KERN_INFO "Clocks: Async mode\n");
+
+		printk(KERN_INFO "Clocks: Setting DSP clock\n");
+		calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
+			&dsp_prediv, &dsp_postdiv, &dsp_mul);
+		ar7_bus_clock =
+			((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
+		tnetd7200_set_clock(dsp_base, &clocks->dsp,
+			dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
+			ar7_bus_clock);
+
+		printk(KERN_INFO "Clocks: Setting CPU clock\n");
+		calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+			&cpu_postdiv, &cpu_mul);
+		ar7_cpu_clock =
+			((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
+		tnetd7200_set_clock(cpu_base, &clocks->cpu,
+			cpu_prediv, cpu_postdiv, -1, cpu_mul,
+			ar7_cpu_clock);
+
+	} else
+		if (*bootcr & BOOT_PLL_2TO1_MODE) {
+			printk(KERN_INFO "Clocks: Sync 2:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting CPU clock\n");
+			calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
+				&cpu_postdiv, &cpu_mul);
+			ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+								/ cpu_postdiv;
+			tnetd7200_set_clock(cpu_base, &clocks->cpu,
+				cpu_prediv, cpu_postdiv, -1, cpu_mul,
+				ar7_cpu_clock);
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ar7_cpu_clock / 2;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+		} else {
+			printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
+
+			printk(KERN_INFO "Clocks: Setting DSP clock\n");
+			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
+				&dsp_postdiv, &dsp_mul);
+			ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+								/ dsp_postdiv;
+			tnetd7200_set_clock(dsp_base, &clocks->dsp,
+				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
+				dsp_mul * 2, ar7_bus_clock);
+
+			ar7_cpu_clock = ar7_bus_clock;
+		}
+
+	printk(KERN_INFO "Clocks: Setting USB clock\n");
+	usb_base = ar7_bus_clock;
+	calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
+		&usb_postdiv, &usb_mul);
+	tnetd7200_set_clock(usb_base, &clocks->usb,
+		usb_prediv, usb_postdiv, -1, usb_mul,
+		TNETD7200_DEF_USB_CLK);
+
+	ar7_dsp_clock = ar7_cpu_clock;
+
+	iounmap(clocks);
+	iounmap(bootcr);
+}
+
+int __init ar7_init_clocks(void)
+{
+	switch (ar7_chip_id()) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		tnetd7200_init_clocks();
+		break;
+	case AR7_CHIP_7300:
+		ar7_dsp_clock = tnetd7300_dsp_clock();
+		tnetd7300_init_clocks();
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
new file mode 100644
index 00000000000..74e14a3dbf4
--- /dev/null
+++ b/arch/mips/ar7/gpio.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ar7/gpio.h>
+
+static const char *ar7_gpio_list[AR7_GPIO_MAX];
+
+int gpio_request(unsigned gpio, const char *label)
+{
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	if (ar7_gpio_list[gpio])
+		return -EBUSY;
+
+	if (label)
+		ar7_gpio_list[gpio] = label;
+	else
+		ar7_gpio_list[gpio] = "busy";
+
+	return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	BUG_ON(!ar7_gpio_list[gpio]);
+	ar7_gpio_list[gpio] = NULL;
+}
+EXPORT_SYMBOL(gpio_free);
diff --git a/arch/mips/ar7/irq.c b/arch/mips/ar7/irq.c
new file mode 100644
index 00000000000..c781556c44e
--- /dev/null
+++ b/arch/mips/ar7/irq.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define EXCEPT_OFFSET	0x80
+#define PACE_OFFSET	0xA0
+#define CHNLS_OFFSET	0x200
+
+#define REG_OFFSET(irq, reg)	((irq) / 32 * 0x4 + reg * 0x10)
+#define SEC_REG_OFFSET(reg)	(EXCEPT_OFFSET + reg * 0x8)
+#define SEC_SR_OFFSET		(SEC_REG_OFFSET(0))	/* 0x80 */
+#define CR_OFFSET(irq)		(REG_OFFSET(irq, 1))	/* 0x10 */
+#define SEC_CR_OFFSET		(SEC_REG_OFFSET(1))	/* 0x88 */
+#define ESR_OFFSET(irq)		(REG_OFFSET(irq, 2))	/* 0x20 */
+#define SEC_ESR_OFFSET		(SEC_REG_OFFSET(2))	/* 0x90 */
+#define ECR_OFFSET(irq)		(REG_OFFSET(irq, 3))	/* 0x30 */
+#define SEC_ECR_OFFSET		(SEC_REG_OFFSET(3))	/* 0x98 */
+#define PIR_OFFSET		(0x40)
+#define MSR_OFFSET		(0x44)
+#define PM_OFFSET(irq)		(REG_OFFSET(irq, 5))	/* 0x50 */
+#define TM_OFFSET(irq)		(REG_OFFSET(irq, 6))	/* 0x60 */
+
+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr))
+
+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4))
+
+static int ar7_irq_base;
+
+static void ar7_unmask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ESR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_mask_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(ECR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_ack_irq(unsigned int irq)
+{
+	writel(1 << ((irq - ar7_irq_base) % 32),
+	       REG(CR_OFFSET(irq - ar7_irq_base)));
+}
+
+static void ar7_unmask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET));
+}
+
+static void ar7_mask_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET));
+}
+
+static void ar7_ack_sec_irq(unsigned int irq)
+{
+	writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET));
+}
+
+static struct irq_chip ar7_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_irq,
+	.mask = ar7_mask_irq,
+	.ack = ar7_ack_irq
+};
+
+static struct irq_chip ar7_sec_irq_type = {
+	.name = "AR7",
+	.unmask = ar7_unmask_sec_irq,
+	.mask = ar7_mask_sec_irq,
+	.ack = ar7_ack_sec_irq,
+};
+
+static struct irqaction ar7_cascade_action = {
+	.handler = no_action,
+	.name = "AR7 cascade interrupt"
+};
+
+static void __init ar7_irq_init(int base)
+{
+	int i;
+	/*
+	 * Disable interrupts and clear pending
+	 */
+	writel(0xffffffff, REG(ECR_OFFSET(0)));
+	writel(0xff, REG(ECR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_ECR_OFFSET));
+	writel(0xffffffff, REG(CR_OFFSET(0)));
+	writel(0xff, REG(CR_OFFSET(32)));
+	writel(0xffffffff, REG(SEC_CR_OFFSET));
+
+	ar7_irq_base = base;
+
+	for (i = 0; i < 40; i++) {
+		writel(i, REG(CHNL_OFFSET(i)));
+		/* Primary IRQ's */
+		set_irq_chip_and_handler(base + i, &ar7_irq_type,
+					 handle_level_irq);
+		/* Secondary IRQ's */
+		if (i < 32)
+			set_irq_chip_and_handler(base + i + 40,
+						 &ar7_sec_irq_type,
+						 handle_level_irq);
+	}
+
+	setup_irq(2, &ar7_cascade_action);
+	setup_irq(ar7_irq_base, &ar7_cascade_action);
+	set_c0_status(IE_IRQ0);
+}
+
+void __init arch_init_irq(void)
+{
+	mips_cpu_irq_init();
+	ar7_irq_init(8);
+}
+
+static void ar7_cascade(void)
+{
+	u32 status;
+	int i, irq;
+
+	/* Primary IRQ's */
+	irq = readl(REG(PIR_OFFSET)) & 0x3f;
+	if (irq) {
+		do_IRQ(ar7_irq_base + irq);
+		return;
+	}
+
+	/* Secondary IRQ's are cascaded through primary '0' */
+	writel(1, REG(CR_OFFSET(irq)));
+	status = readl(REG(SEC_SR_OFFSET));
+	for (i = 0; i < 32; i++) {
+		if (status & 1) {
+			do_IRQ(ar7_irq_base + i + 40);
+			return;
+		}
+		status >>= 1;
+	}
+
+	spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	if (pending & STATUSF_IP7)		/* cpu timer */
+		do_IRQ(7);
+	else if (pending & STATUSF_IP2)		/* int0 hardware line */
+		ar7_cascade();
+	else
+		spurious_interrupt();
+}
diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
new file mode 100644
index 00000000000..46fed44825a
--- /dev/null
+++ b/arch/mips/ar7/memory.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mips-boards/prom.h>
+
+static int __init memsize(void)
+{
+	u32 size = (64 << 20);
+	u32 *addr = (u32 *)KSEG1ADDR(AR7_SDRAM_BASE + size - 4);
+	u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end));
+	u32 *tmpaddr = addr;
+
+	while (tmpaddr > kernel_end) {
+		*tmpaddr = (u32)tmpaddr;
+		size >>= 1;
+		tmpaddr -= size >> 2;
+	}
+
+	do {
+		tmpaddr += size >> 2;
+		if (*tmpaddr != (u32)tmpaddr)
+			break;
+		size <<= 1;
+	} while (size < (64 << 20));
+
+	writel(tmpaddr, &addr);
+
+	return size;
+}
+
+void __init prom_meminit(void)
+{
+	unsigned long pages;
+
+	pages = memsize() >> PAGE_SHIFT;
+	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
+			  BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing to free */
+}
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
new file mode 100644
index 00000000000..54224496178
--- /dev/null
+++ b/arch/mips/ar7/platform.c
@@ -0,0 +1,555 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/version.h>
+#include <linux/vlynq.h>
+#include <linux/leds.h>
+#include <linux/string.h>
+#include <linux/etherdevice.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/prom.h>
+
+struct plat_vlynq_data {
+	struct plat_vlynq_ops ops;
+	int gpio_bit;
+	int reset_bit;
+};
+
+
+static int vlynq_on(struct vlynq_device *dev)
+{
+	int result;
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
+	result = gpio_request(pdata->gpio_bit, "vlynq");
+	if (result)
+		goto out;
+
+	ar7_device_reset(pdata->reset_bit);
+
+	result = ar7_gpio_disable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = ar7_gpio_enable(pdata->gpio_bit);
+	if (result)
+		goto out_enabled;
+
+	result = gpio_direction_output(pdata->gpio_bit, 0);
+	if (result)
+		goto out_gpio_enabled;
+
+	msleep(50);
+
+	gpio_set_value(pdata->gpio_bit, 1);
+	msleep(50);
+
+	return 0;
+
+out_gpio_enabled:
+	ar7_gpio_disable(pdata->gpio_bit);
+out_enabled:
+	ar7_device_disable(pdata->reset_bit);
+	gpio_free(pdata->gpio_bit);
+out:
+	return result;
+}
+
+static void vlynq_off(struct vlynq_device *dev)
+{
+	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+	ar7_gpio_disable(pdata->gpio_bit);
+	gpio_free(pdata->gpio_bit);
+	ar7_device_disable(pdata->reset_bit);
+}
+
+static struct resource physmap_flash_resource = {
+	.name = "mem",
+	.flags = IORESOURCE_MEM,
+	.start = 0x10000000,
+	.end = 0x107fffff,
+};
+
+static struct resource cpmac_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC0,
+		.end = AR7_REGS_MAC0 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 27,
+		.end = 27,
+	},
+};
+
+static struct resource cpmac_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_MAC1,
+		.end = AR7_REGS_MAC1 + 0x7ff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 41,
+		.end = 41,
+	},
+};
+
+static struct resource vlynq_low_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ0,
+		.end = AR7_REGS_VLYNQ0 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 29,
+		.end = 29,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x04000000,
+		.end = 0x04ffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 80,
+		.end = 111,
+	},
+};
+
+static struct resource vlynq_high_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_VLYNQ1,
+		.end = AR7_REGS_VLYNQ1 + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 33,
+		.end = 33,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x0c000000,
+		.end = 0x0cffffff,
+	},
+	{
+		.name = "devirq",
+		.flags = IORESOURCE_IRQ,
+		.start = 112,
+		.end = 143,
+	},
+};
+
+static struct resource usb_res[] = {
+	{
+		.name = "regs",
+		.flags = IORESOURCE_MEM,
+		.start = AR7_REGS_USB,
+		.end = AR7_REGS_USB + 0xff,
+	},
+	{
+		.name = "irq",
+		.flags = IORESOURCE_IRQ,
+		.start = 32,
+		.end = 32,
+	},
+	{
+		.name = "mem",
+		.flags = IORESOURCE_MEM,
+		.start = 0x03400000,
+		.end = 0x034001fff,
+	},
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+	.width = 2,
+};
+
+static struct plat_cpmac_data cpmac_low_data = {
+	.reset_bit = 17,
+	.power_bit = 20,
+	.phy_mask = 0x80000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data = {
+	.reset_bit = 21,
+	.power_bit = 22,
+	.phy_mask = 0x7fffffff,
+};
+
+static struct plat_vlynq_data vlynq_low_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 20,
+	.gpio_bit = 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+	.ops.on = vlynq_on,
+	.ops.off = vlynq_off,
+	.reset_bit = 16,
+	.gpio_bit = 19,
+};
+
+static struct platform_device physmap_flash = {
+	.id = 0,
+	.name = "physmap-flash",
+	.dev.platform_data = &physmap_flash_data,
+	.resource = &physmap_flash_resource,
+	.num_resources = 1,
+};
+
+static u64 cpmac_dma_mask = DMA_32BIT_MASK;
+static struct platform_device cpmac_low = {
+	.id = 0,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+		.platform_data = &cpmac_low_data,
+	},
+	.resource = cpmac_low_res,
+	.num_resources = ARRAY_SIZE(cpmac_low_res),
+};
+
+static struct platform_device cpmac_high = {
+	.id = 1,
+	.name = "cpmac",
+	.dev = {
+		.dma_mask = &cpmac_dma_mask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+		.platform_data = &cpmac_high_data,
+	},
+	.resource = cpmac_high_res,
+	.num_resources = ARRAY_SIZE(cpmac_high_res),
+};
+
+static struct platform_device vlynq_low = {
+	.id = 0,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_low_data,
+	.resource = vlynq_low_res,
+	.num_resources = ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+	.id = 1,
+	.name = "vlynq",
+	.dev.platform_data = &vlynq_high_data,
+	.resource = vlynq_high_res,
+	.num_resources = ARRAY_SIZE(vlynq_high_res),
+};
+
+
+static struct gpio_led default_leds[] = {
+	{
+		.name = "status",
+		.gpio = 8,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dsl502t_leds[] = {
+	{
+		.name = "status",
+		.gpio = 9,
+		.active_low = 1,
+	},
+	{
+		.name = "ethernet",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "usb",
+		.gpio = 12,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led dg834g_leds[] = {
+	{
+		.name = "ppp",
+		.gpio = 6,
+		.active_low = 1,
+	},
+	{
+		.name = "status",
+		.gpio = 7,
+		.active_low = 1,
+	},
+	{
+		.name = "adsl",
+		.gpio = 8,
+		.active_low = 1,
+	},
+	{
+		.name = "wifi",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "power",
+		.gpio = 14,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+};
+
+static struct gpio_led fb_sl_leds[] = {
+	{
+		.name = "1",
+		.gpio = 7,
+	},
+	{
+		.name = "2",
+		.gpio = 13,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 10,
+		.active_low = 1,
+	},
+	{
+		.name = "4",
+		.gpio = 12,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 9,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led fb_fon_leds[] = {
+	{
+		.name = "1",
+		.gpio = 8,
+	},
+	{
+		.name = "2",
+		.gpio = 3,
+		.active_low = 1,
+	},
+	{
+		.name = "3",
+		.gpio = 5,
+	},
+	{
+		.name = "4",
+		.gpio = 4,
+		.active_low = 1,
+	},
+	{
+		.name = "5",
+		.gpio = 11,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data ar7_led_data;
+
+static struct platform_device ar7_gpio_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &ar7_led_data,
+	}
+};
+
+static struct platform_device ar7_udc = {
+	.id = -1,
+	.name = "ar7_udc",
+	.resource = usb_res,
+	.num_resources = ARRAY_SIZE(usb_res),
+};
+
+static inline unsigned char char2hex(char h)
+{
+	switch (h) {
+	case '0': case '1': case '2': case '3': case '4':
+	case '5': case '6': case '7': case '8': case '9':
+		return h - '0';
+	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+		return h - 'A' + 10;
+	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+		return h - 'a' + 10;
+	default:
+		return 0;
+	}
+}
+
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+	int i;
+	char name[5], default_mac[ETH_ALEN], *mac;
+
+	mac = NULL;
+	sprintf(name, "mac%c", 'a' + instance);
+	mac = prom_getenv(name);
+	if (!mac) {
+		sprintf(name, "mac%c", 'a');
+		mac = prom_getenv(name);
+	}
+	if (!mac) {
+		random_ether_addr(default_mac);
+		mac = default_mac;
+	}
+	for (i = 0; i < 6; i++)
+		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+			char2hex(mac[i * 3 + 1]);
+}
+
+static void __init detect_leds(void)
+{
+	char *prid, *usb_prod;
+
+	/* Default LEDs	*/
+	ar7_led_data.num_leds = ARRAY_SIZE(default_leds);
+	ar7_led_data.leds = default_leds;
+
+	/* FIXME: the whole thing is unreliable */
+	prid = prom_getenv("ProductID");
+	usb_prod = prom_getenv("usb_prod");
+
+	/* If we can't get the product id from PROM, use the default LEDs */
+	if (!prid)
+		return;
+
+	if (strstr(prid, "Fritz_Box_FON")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds);
+		ar7_led_data.leds = fb_fon_leds;
+	} else if (strstr(prid, "Fritz_Box_")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds);
+		ar7_led_data.leds = fb_sl_leds;
+	} else if ((!strcmp(prid, "AR7RD") || !strcmp(prid, "AR7DB"))
+		&& usb_prod != NULL && strstr(usb_prod, "DSL-502T")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds);
+		ar7_led_data.leds = dsl502t_leds;
+	} else if (strstr(prid, "DG834")) {
+		ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
+		ar7_led_data.leds = dg834g_leds;
+	}
+}
+
+static int __init ar7_register_devices(void)
+{
+	int res;
+	static struct uart_port uart_port[2];
+
+	memset(uart_port, 0, sizeof(struct uart_port) * 2);
+
+	uart_port[0].type = PORT_16550A;
+	uart_port[0].line = 0;
+	uart_port[0].irq = AR7_IRQ_UART0;
+	uart_port[0].uartclk = ar7_bus_freq() / 2;
+	uart_port[0].iotype = UPIO_MEM32;
+	uart_port[0].mapbase = AR7_REGS_UART0;
+	uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
+	uart_port[0].regshift = 2;
+	res = early_serial_setup(&uart_port[0]);
+	if (res)
+		return res;
+
+
+	/* Only TNETD73xx have a second serial port */
+	if (ar7_has_second_uart()) {
+		uart_port[1].type = PORT_16550A;
+		uart_port[1].line = 1;
+		uart_port[1].irq = AR7_IRQ_UART1;
+		uart_port[1].uartclk = ar7_bus_freq() / 2;
+		uart_port[1].iotype = UPIO_MEM32;
+		uart_port[1].mapbase = UR8_REGS_UART1;
+		uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
+		uart_port[1].regshift = 2;
+		res = early_serial_setup(&uart_port[1]);
+		if (res)
+			return res;
+	}
+
+	res = platform_device_register(&physmap_flash);
+	if (res)
+		return res;
+
+	ar7_device_disable(vlynq_low_data.reset_bit);
+	res = platform_device_register(&vlynq_low);
+	if (res)
+		return res;
+
+	if (ar7_has_high_vlynq()) {
+		ar7_device_disable(vlynq_high_data.reset_bit);
+		res = platform_device_register(&vlynq_high);
+		if (res)
+			return res;
+	}
+
+	if (ar7_has_high_cpmac()) {
+		cpmac_get_mac(1, cpmac_high_data.dev_addr);
+		res = platform_device_register(&cpmac_high);
+		if (res)
+			return res;
+	} else {
+		cpmac_low_data.phy_mask = 0xffffffff;
+	}
+
+	cpmac_get_mac(0, cpmac_low_data.dev_addr);
+	res = platform_device_register(&cpmac_low);
+	if (res)
+		return res;
+
+	detect_leds();
+	res = platform_device_register(&ar7_gpio_leds);
+	if (res)
+		return res;
+
+	res = platform_device_register(&ar7_udc);
+
+	return res;
+}
+arch_initcall(ar7_register_devices);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
new file mode 100644
index 00000000000..a320bceb2f9
--- /dev/null
+++ b/arch/mips/ar7/prom.c
@@ -0,0 +1,297 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/serial_reg.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <asm/bootinfo.h>
+
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+#define MAX_ENTRY 80
+
+struct env_var {
+	char *name;
+	char *value;
+};
+
+static struct env_var adam2_env[MAX_ENTRY];
+
+char *prom_getenv(const char *name)
+{
+	int i;
+	for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
+		if (!strcmp(name, adam2_env[i].name))
+			return adam2_env[i].value;
+
+	return NULL;
+}
+EXPORT_SYMBOL(prom_getenv);
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+static void  __init ar7_init_cmdline(int argc, char *argv[])
+{
+	char *cp;
+	int actr;
+
+	actr = 1; /* Always ignore argv[0] */
+
+	cp = &(arcs_cmdline[0]);
+	while (actr < argc) {
+		strcpy(cp, argv[actr]);
+		cp += strlen(argv[actr]);
+		*cp++ = ' ';
+		actr++;
+	}
+	if (cp != &(arcs_cmdline[0])) {
+		/* get rid of trailing space */
+		--cp;
+		*cp = '\0';
+	}
+}
+
+struct psbl_rec {
+	u32 psbl_size;
+	u32 env_base;
+	u32 env_size;
+	u32 ffs_base;
+	u32 ffs_size;
+};
+
+static __initdata char psp_env_version[] = "TIENV0.8";
+
+struct psp_env_chunk {
+	u8 num;
+	u8 ctrl;
+	u16 csum;
+	u8 len;
+	char data[11];
+} __attribute__ ((packed));
+
+struct psp_var_map_entry {
+	u8 num;
+	char *value;
+};
+
+static struct psp_var_map_entry psp_var_map[] = {
+	{ 1, "cpufrequency" },
+	{ 2, "memsize" },
+	{ 3, "flashsize" },
+	{ 4, "modetty0" },
+	{ 5, "modetty1" },
+	{ 8, "maca" },
+	{ 9, "macb" },
+	{ 28, "sysfrequency" },
+	{ 38, "mipsfrequency" },
+};
+
+/*
+
+Well-known variable (num is looked up in table above for matching variable name)
+Example: cpufrequency=211968000
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in a single chunk
+Example: NAME=VALUE
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Name=Value pair in 2 chunks (len is the number of chunks)
+Example: bootloaderVersion=1.3.7.15
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0
++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+---
+
+Data is padded with 0xFF
+
+*/
+
+#define PSP_ENV_SIZE  4096
+
+static char psp_env_data[PSP_ENV_SIZE] = { 0, };
+
+static char * __init lookup_psp_var_map(u8 num)
+{
+	int i;
+
+	for (i = 0; i < sizeof(psp_var_map); i++)
+		if (psp_var_map[i].num == num)
+			return psp_var_map[i].value;
+
+	return NULL;
+}
+
+static void __init add_adam2_var(char *name, char *value)
+{
+	int i;
+	for (i = 0; i < MAX_ENTRY; i++) {
+		if (!adam2_env[i].name) {
+			adam2_env[i].name = name;
+			adam2_env[i].value = value;
+			return;
+		} else if (!strcmp(adam2_env[i].name, name)) {
+			adam2_env[i].value = value;
+			return;
+		}
+	}
+}
+
+static int __init parse_psp_env(void *psp_env_base)
+{
+	int i, n;
+	char *name, *value;
+	struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data;
+
+	memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE);
+
+	i = 1;
+	n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk);
+	while (i < n) {
+		if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n))
+			break;
+		value = chunks[i].data;
+		if (chunks[i].num) {
+			name = lookup_psp_var_map(chunks[i].num);
+		} else {
+			name = value;
+			value += strlen(name) + 1;
+		}
+		if (name)
+			add_adam2_var(name, value);
+		i += chunks[i].len;
+	}
+	return 0;
+}
+
+static void __init ar7_init_env(struct env_var *env)
+{
+	int i;
+	struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300));
+	void *psp_env = (void *)KSEG1ADDR(psbl->env_base);
+
+	if (strcmp(psp_env, psp_env_version) == 0) {
+		parse_psp_env(psp_env);
+	} else {
+		for (i = 0; i < MAX_ENTRY; i++, env++)
+			if (env->name)
+				add_adam2_var(env->name, env->value);
+	}
+}
+
+static void __init console_config(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char console_string[40];
+	int baud = 0;
+	char parity = '\0', bits = '\0', flow = '\0';
+	char *s, *p;
+
+	if (strstr(prom_getcmdline(), "console="))
+		return;
+
+#ifdef CONFIG_KGDB
+	if (!strstr(prom_getcmdline(), "nokgdb")) {
+		strcat(prom_getcmdline(), " console=kgdb");
+		kgdb_enabled = 1;
+		return;
+	}
+#endif
+
+	s = prom_getenv("modetty0");
+	if (s) {
+		baud = simple_strtoul(s, &p, 10);
+		s = p;
+		if (*s == ',')
+			s++;
+		if (*s)
+			parity = *s++;
+		if (*s == ',')
+			s++;
+		if (*s)
+			bits = *s++;
+		if (*s == ',')
+			s++;
+		if (*s == 'h')
+			flow = 'r';
+	}
+
+	if (baud == 0)
+		baud = 38400;
+	if (parity != 'n' && parity != 'o' && parity != 'e')
+		parity = 'n';
+	if (bits != '7' && bits != '8')
+		bits = '8';
+
+	if (flow == 'r')
+		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud,
+			parity, bits, flow);
+	else
+		sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
+			bits);
+	strcat(prom_getcmdline(), console_string);
+#endif
+}
+
+void __init prom_init(void)
+{
+	ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
+	ar7_init_env((struct env_var *)fw_arg2);
+	console_config();
+}
+
+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
+static inline unsigned int serial_in(int offset)
+{
+	return readl((void *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	writel(value, (void *)PORT(offset));
+}
+
+char prom_getchar(void)
+{
+	while (!(serial_in(UART_LSR) & UART_LSR_DR))
+		;
+	return serial_in(UART_RX);
+}
+
+int prom_putchar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)
+		;
+	serial_out(UART_TX, c);
+	return 1;
+}
+
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
new file mode 100644
index 00000000000..6ebb5f16d96
--- /dev/null
+++ b/arch/mips/ar7/setup.c
@@ -0,0 +1,94 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/time.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-ar7/ar7.h>
+#include <asm/mach-ar7/prom.h>
+
+static void ar7_machine_restart(char *command)
+{
+	u32 *softres_reg = ioremap(AR7_REGS_RESET +
+					  AR7_RESET_SOFTWARE, 1);
+	writel(1, softres_reg);
+}
+
+static void ar7_machine_halt(void)
+{
+	while (1)
+		;
+}
+
+static void ar7_machine_power_off(void)
+{
+	u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
+	u32 power_state = readl(power_reg) | (3 << 30);
+	writel(power_state, power_reg);
+	ar7_machine_halt();
+}
+
+const char *get_system_type(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7300:
+		return "TI AR7 (TNETD7300)";
+	case AR7_CHIP_7100:
+		return "TI AR7 (TNETD7100)";
+	case AR7_CHIP_7200:
+		return "TI AR7 (TNETD7200)";
+	default:
+		return "TI AR7 (Unknown)";
+	}
+}
+
+static int __init ar7_init_console(void)
+{
+	return 0;
+}
+console_initcall(ar7_init_console);
+
+/*
+ * Initializes basic routines and structures pointers, memory size (as
+ * given by the bios and saves the command line.
+ */
+
+void __init plat_mem_setup(void)
+{
+	unsigned long io_base;
+
+	_machine_restart = ar7_machine_restart;
+	_machine_halt = ar7_machine_halt;
+	pm_power_off = ar7_machine_power_off;
+	panic_timeout = 3;
+
+	io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
+	if (!io_base)
+		panic("Can't remap IO base!\n");
+	set_io_port_base(io_base);
+
+	prom_meminit();
+
+	printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
+					get_system_type(),
+		ar7_chip_id(), ar7_chip_rev());
+}
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
new file mode 100644
index 00000000000..a1fba894daa
--- /dev/null
+++ b/arch/mips/ar7/time.c
@@ -0,0 +1,30 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/mach-ar7/ar7.h>
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = ar7_cpu_freq() / 2;
+}
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
new file mode 100644
index 00000000000..dad5b6769d7
--- /dev/null
+++ b/arch/mips/configs/ar7_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jun 24 14:08:59 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+CONFIG_AR7=y
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_KEXEC=y
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_PROBE_INITRD_HEADER=y
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+CONFIG_DEFAULT_WESTWOOD=y
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="westwood"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+# CONFIG_ATM_CLIP is not set
+# CONFIG_ATM_LANE is not set
+CONFIG_ATM_BR2684=m
+CONFIG_ATM_BR2684_IPFILTER=y
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_CPMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AR7_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_DRIVER_EXTIF=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_VLYNQ=y
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
new file mode 100644
index 00000000000..de71694614d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_H__
+#define __AR7_H__
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <asm/addrspace.h>
+
+#define AR7_SDRAM_BASE	0x14000000
+
+#define AR7_REGS_BASE	0x08610000
+
+#define AR7_REGS_MAC0	(AR7_REGS_BASE + 0x0000)
+#define AR7_REGS_GPIO	(AR7_REGS_BASE + 0x0900)
+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */
+#define AR7_REGS_POWER	(AR7_REGS_BASE + 0x0a00)
+#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80)
+#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20)
+#define AR7_REGS_UART0	(AR7_REGS_BASE + 0x0e00)
+#define AR7_REGS_USB	(AR7_REGS_BASE + 0x1200)
+#define AR7_REGS_RESET	(AR7_REGS_BASE + 0x1600)
+#define AR7_REGS_VLYNQ0	(AR7_REGS_BASE + 0x1800)
+#define AR7_REGS_DCL	(AR7_REGS_BASE + 0x1a00)
+#define AR7_REGS_VLYNQ1	(AR7_REGS_BASE + 0x1c00)
+#define AR7_REGS_MDIO	(AR7_REGS_BASE + 0x1e00)
+#define AR7_REGS_IRQ	(AR7_REGS_BASE + 0x2400)
+#define AR7_REGS_MAC1	(AR7_REGS_BASE + 0x2800)
+
+#define AR7_REGS_WDT	(AR7_REGS_BASE + 0x1f00)
+#define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
+#define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
+
+#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_SOFTWARE	0x4
+#define AR7_RESET_STATUS	0x8
+
+#define AR7_RESET_BIT_CPMAC_LO	17
+#define AR7_RESET_BIT_CPMAC_HI	21
+#define AR7_RESET_BIT_MDIO	22
+#define AR7_RESET_BIT_EPHY	26
+
+/* GPIO control registers */
+#define AR7_GPIO_INPUT	0x0
+#define AR7_GPIO_OUTPUT	0x4
+#define AR7_GPIO_DIR	0x8
+#define AR7_GPIO_ENABLE	0xc
+
+#define AR7_CHIP_7100	0x18
+#define AR7_CHIP_7200	0x2b
+#define AR7_CHIP_7300	0x05
+
+/* Interrupts */
+#define AR7_IRQ_UART0	15
+#define AR7_IRQ_UART1	16
+
+/* Clocks */
+#define AR7_AFE_CLOCK	35328000
+#define AR7_REF_CLOCK	25000000
+#define AR7_XTAL_CLOCK	24000000
+
+struct plat_cpmac_data {
+	int reset_bit;
+	int power_bit;
+	u32 phy_mask;
+	char dev_addr[6];
+};
+
+struct plat_dsl_data {
+	int reset_bit_dsl;
+	int reset_bit_sar;
+};
+
+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
+
+static inline u16 ar7_chip_id(void)
+{
+	return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff;
+}
+
+static inline u8 ar7_chip_rev(void)
+{
+	return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff;
+}
+
+static inline int ar7_cpu_freq(void)
+{
+	return ar7_cpu_clock;
+}
+
+static inline int ar7_bus_freq(void)
+{
+	return ar7_bus_clock;
+}
+
+static inline int ar7_vbus_freq(void)
+{
+	return ar7_bus_clock / 2;
+}
+#define ar7_cpmac_freq ar7_vbus_freq
+
+static inline int ar7_dsp_freq(void)
+{
+	return ar7_dsp_clock;
+}
+
+static inline int ar7_has_high_cpmac(void)
+{
+	u16 chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		return 0;
+	case AR7_CHIP_7300:
+		return 1;
+	default:
+		return -ENXIO;
+	}
+}
+#define ar7_has_high_vlynq ar7_has_high_cpmac
+#define ar7_has_second_uart ar7_has_high_cpmac
+
+static inline void ar7_device_enable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) | (1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_disable(u32 bit)
+{
+	void *reset_reg =
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_reset(u32 bit)
+{
+	ar7_device_disable(bit);
+	ar7_device_enable(bit);
+}
+
+static inline void ar7_device_on(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) | (1 << bit), power_reg);
+	msleep(20);
+}
+
+static inline void ar7_device_off(u32 bit)
+{
+	void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER);
+	writel(readl(power_reg) & ~(1 << bit), power_reg);
+	msleep(20);
+}
+
+#endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h
new file mode 100644
index 00000000000..cbe9c4f126d
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __AR7_GPIO_H__
+#define __AR7_GPIO_H__
+
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+/* Common GPIO layer */
+static inline int gpio_get_value(unsigned gpio)
+{
+	void __iomem *gpio_in =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT);
+
+	return readl(gpio_in) & (1 << gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	void __iomem *gpio_out =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT);
+	unsigned tmp;
+
+	tmp = readl(gpio_out) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, gpio_out);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	void __iomem *gpio_dir =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR);
+
+	if (gpio >= AR7_GPIO_MAX)
+		return -EINVAL;
+
+	gpio_set_value(gpio, value);
+	writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* Board specific GPIO functions */
+static inline int ar7_gpio_enable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+	return 0;
+}
+
+static inline int ar7_gpio_disable(unsigned gpio)
+{
+	void __iomem *gpio_en =
+		(void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE);
+
+	writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+	return 0;
+}
+
+#include <asm-generic/gpio.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ar7/irq.h b/arch/mips/include/asm/mach-ar7/irq.h
new file mode 100644
index 00000000000..39e9757e3d9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/irq.h
@@ -0,0 +1,16 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Shamelessly copied from asm-mips/mach-emma2rh/
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_AR7_IRQ_H
+#define __ASM_AR7_IRQ_H
+
+#define NR_IRQS	256
+
+#include_next <irq.h>
+
+#endif /* __ASM_AR7_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ar7/prom.h b/arch/mips/include/asm/mach-ar7/prom.h
new file mode 100644
index 00000000000..088f61fe85e
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/prom.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __PROM_H__
+#define __PROM_H__
+
+extern char *prom_getenv(const char *name);
+extern void prom_meminit(void);
+
+#endif /* __PROM_H__ */
diff --git a/arch/mips/include/asm/mach-ar7/spaces.h b/arch/mips/include/asm/mach-ar7/spaces.h
new file mode 100644
index 00000000000..ac28f273449
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/spaces.h
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle
+ * Copyright (C) 2000, 2002  Maciej W. Rozycki
+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc.
+ */
+#ifndef _ASM_AR7_SPACES_H
+#define _ASM_AR7_SPACES_H
+
+/*
+ * This handles the memory map.
+ * We handle pages at KSEG0 for kernels with 32 bit address space.
+ */
+#define PAGE_OFFSET		0x94000000UL
+#define PHYS_OFFSET		0x14000000UL
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_AR7_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ar7/war.h b/arch/mips/include/asm/mach-ar7/war.h
new file mode 100644
index 00000000000..f4862b56308
--- /dev/null
+++ b/arch/mips/include/asm/mach-ar7/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_AR7_WAR_H
+#define __ASM_MIPS_MACH_AR7_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_AR7_WAR_H */
-- 
cgit v1.2.3


From 52a7a27cd8f6c57817da99fef019e37b9c303c4e Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 28 Jun 2009 09:26:09 -0700
Subject: MIPS: MT: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3ca5f42e819..07b9ec2c6e3 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1387,7 +1387,7 @@ static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
 	return len;
 
 out_einval:
-	return -EINVAL;;
+	return -EINVAL;
 }
 
 static struct device_attribute vpe_class_attributes[] = {
-- 
cgit v1.2.3


From d7e014db374d987c6bcff0b9abab2c6796f8e793 Mon Sep 17 00:00:00 2001
From: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Date: Fri, 26 Jun 2009 19:59:25 +0300
Subject: MIPS: Malta: Remove unnecessary function prototypes

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mti-malta/malta-reset.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index 42dee4da37b..f48d60e8429 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -28,9 +28,6 @@
 #include <asm/reboot.h>
 #include <asm/mips-boards/generic.h>
 
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
 static void mips_machine_restart(char *command)
 {
 	unsigned int __iomem *softres_reg =
-- 
cgit v1.2.3


From 69f16c9a8630edc64cb1d6f1bfca4ee7bc16279f Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Fri, 26 Jun 2009 09:53:57 -0700
Subject: MIPS: Hookup new syscalls sys_rt_tgsigqueueinfo and
 sys_perf_counter_open.

[Ralf: I fixed up the numbering in the comment in scall64-n32.S.]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/unistd.h | 18 ++++++++++++------
 arch/mips/kernel/scall32-o32.S |  2 ++
 arch/mips/kernel/scall64-64.S  |  2 ++
 arch/mips/kernel/scall64-n32.S |  2 ++
 arch/mips/kernel/scall64-o32.S |  2 ++
 5 files changed, 20 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 40005010827..b70c49fdda2 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -352,16 +352,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 329)
 #define __NR_preadv			(__NR_Linux + 330)
 #define __NR_pwritev			(__NR_Linux + 331)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
+#define __NR_perf_counter_open		(__NR_Linux + 333)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		331
+#define __NR_Linux_syscalls		333
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		331
+#define __NR_O32_Linux_syscalls		333
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -660,16 +662,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 288)
 #define __NR_preadv			(__NR_Linux + 289)
 #define __NR_pwritev			(__NR_Linux + 290)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
+#define __NR_perf_counter_open		(__NR_Linux + 292)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		290
+#define __NR_Linux_syscalls		292
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		290
+#define __NR_64_Linux_syscalls		292
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -972,16 +976,18 @@
 #define __NR_inotify_init1		(__NR_Linux + 292)
 #define __NR_preadv			(__NR_Linux + 293)
 #define __NR_pwritev			(__NR_Linux + 294)
+#define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
+#define __NR_perf_counter_open		(__NR_Linux + 296)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		294
+#define __NR_Linux_syscalls		296
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		294
+#define __NR_N32_Linux_syscalls		296
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 0b31b9bda04..20a86e08fd5 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -652,6 +652,8 @@ einval:	li	v0, -ENOSYS
 	sys	sys_inotify_init1	1
 	sys	sys_preadv		6	/* 4330 */
 	sys	sys_pwritev		6
+	sys	sys_rt_tgsigqueueinfo	4
+	sys	sys_perf_counter_open	5
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index c647fd6e722..b046130d4c5 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -489,4 +489,6 @@ sys_call_table:
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev			/* 5390 */
+	PTR	sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 93cc672f452..15874f9812c 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -415,4 +415,6 @@ EXPORT(sysn32_call_table)
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
+	PTR	sys_perf_counter_open
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index a5598b2339d..781e0f1e953 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -535,4 +535,6 @@ sys_call_table:
 	PTR	sys_inotify_init1
 	PTR	compat_sys_preadv		/* 4330 */
 	PTR	compat_sys_pwritev
+	PTR	compat_sys_rt_tgsigqueueinfo
+	PTR	sys_perf_counter_open
 	.size	sys_call_table,.-sys_call_table
-- 
cgit v1.2.3


From 27fdd325dace4a1ebfa10e93ba6f3d25f25df674 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yyuasa@linux.com>
Date: Mon, 29 Jun 2009 11:11:05 +0900
Subject: MIPS: Update VR41xx GPIO driver to use gpiolib

Signed-off-by: Yoichi Yuasa <yyuasa@linux.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                  |  1 +
 arch/mips/include/asm/vr41xx/giu.h | 22 +++-------------------
 2 files changed, 4 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b0e55113633..64891f74019 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -267,6 +267,7 @@ config MACH_VR41XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select SYS_HAS_CPU_VR41XX
+	select ARCH_REQUIRE_GPIOLIB
 
 config NXP_STB220
 	bool "NXP STB220 board"
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index 0bcdd3a5c25..b369c091b0e 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series General-purpose I/O Unit.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2009  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -41,7 +41,8 @@ typedef enum {
 	IRQ_SIGNAL_HOLD,
 } irq_signal_t;
 
-extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_t signal);
+extern void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger,
+				   irq_signal_t signal);
 
 typedef enum {
 	IRQ_LEVEL_LOW,
@@ -50,23 +51,6 @@ typedef enum {
 
 extern void vr41xx_set_irq_level(unsigned int pin, irq_level_t level);
 
-typedef enum {
-	GPIO_DATA_LOW,
-	GPIO_DATA_HIGH,
-	GPIO_DATA_INVAL,
-} gpio_data_t;
-
-extern gpio_data_t vr41xx_gpio_get_pin(unsigned int pin);
-extern int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data);
-
-typedef enum {
-	GPIO_INPUT,
-	GPIO_OUTPUT,
-	GPIO_OUTPUT_DISABLE,
-} gpio_direction_t;
-
-extern int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir);
-
 typedef enum {
 	GPIO_PULL_DOWN,
 	GPIO_PULL_UP,
-- 
cgit v1.2.3


From b53d4d1f8d522342e66f79b8b49a19835071fed4 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Mon, 29 Jun 2009 09:54:15 -0700
Subject: MIPS: Define __arch_swab64 for all mips r2 cpus

Some CPUs implement mipsr2, but because they are a super-set of mips64r2 do
not define CONFIG_CPU_MIPS64_R2.  Cavium OCTEON falls into this category.
We would still like to use the optimized implementation, so since we have
already checked for CONFIG_CPU_MIPSR2, checking for CONFIG_64BIT instead of
CONFIG_CPU_MIPS64_R2 is sufficient.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/swab.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/swab.h b/arch/mips/include/asm/swab.h
index 99993c0d6c1..97c2f81b4b4 100644
--- a/arch/mips/include/asm/swab.h
+++ b/arch/mips/include/asm/swab.h
@@ -38,7 +38,11 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 }
 #define __arch_swab32 __arch_swab32
 
-#ifdef CONFIG_CPU_MIPS64_R2
+/*
+ * Having already checked for CONFIG_CPU_MIPSR2, enable the
+ * optimized version for 64-bit kernel on r2 CPUs.
+ */
+#ifdef CONFIG_64BIT
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
@@ -50,6 +54,6 @@ static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 	return x;
 }
 #define __arch_swab64 __arch_swab64
-#endif /* CONFIG_CPU_MIPS64_R2 */
+#endif /* CONFIG_64BIT */
 #endif /* CONFIG_CPU_MIPSR2 */
 #endif /* _ASM_SWAB_H */
-- 
cgit v1.2.3


From 9306c8def6abc2dbde4ac75eb6c631606b8fc1dd Mon Sep 17 00:00:00 2001
From: Tim Anderson <tanderson@mvista.com>
Date: Wed, 17 Jun 2009 16:21:19 -0700
Subject: MIPS: CMP: Extend the GIC IPI interrupts beyond 32

This patch extends the GIC interrupt handling beyond the current 32 bit
range as well as extending the number of interrupts based on the number
of CPUs.

Signed-off-by: Tim Anderson <tanderson@mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/gic.h |  4 ++++
 arch/mips/kernel/irq-gic.c  | 15 ++++-----------
 2 files changed, 8 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 954807d9d66..e8fdd92c52c 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,11 @@
 #define GIC_TRIG_EDGE			1
 #define GIC_TRIG_LEVEL			0
 
+#if CONFIG_SMP
+#define GIC_NUM_INTRS			(24 + NR_CPUS * 2)
+#else
 #define GIC_NUM_INTRS			32
+#endif
 
 #define MSK(n) ((1 << (n)) - 1)
 #define REG32(addr)		(*(volatile unsigned int *) (addr))
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 39000f103f2..5c85e1ce049 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -107,9 +107,7 @@ static unsigned int gic_irq_startup(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 	return 0;
 }
 
@@ -120,8 +118,7 @@ static void gic_irq_ack(unsigned int irq)
 #endif
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 
 	if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
 		if (!gic_wedgeb2bok)
@@ -138,18 +135,14 @@ static void gic_mask_irq(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_RMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_CLR_INTR_MASK(irq, 1);
 }
 
 static void gic_unmask_irq(unsigned int irq)
 {
 	pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
 	irq -= _irqbase;
-	/* FIXME: this is wrong for !GICISWORDLITTLEENDIAN */
-	GICWRITE(GIC_REG_ADDR(SHARED, (GIC_SH_SMASK_31_0_OFS + (irq / 32))),
-		 1 << (irq % 32));
+	GIC_SET_INTR_MASK(irq, 1);
 }
 
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From a214cef9a5d06894785dca1f967c9c324cc84c17 Mon Sep 17 00:00:00 2001
From: Tim Anderson <tanderson@mvista.com>
Date: Wed, 17 Jun 2009 16:22:25 -0700
Subject: MIPS: CMP: Extend IPI handling to CPU number

This takes the current IPI interrupt assignment from the fix number of 4
to the number of CPUs defined in the system.

Signed-off-by: Tim Anderson <tanderson@mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/irq-gic.c      |  4 +++
 arch/mips/mti-malta/malta-int.c | 74 ++++++++++++++++++++---------------------
 2 files changed, 40 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 5c85e1ce049..d2072cd3859 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -247,6 +247,10 @@ static void __init gic_basic_init(void)
 		if (cpu == X)
 			continue;
 
+		if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
+					_intrmap[i].ipiflag == 0)
+			continue;
+
 		setup_intr(_intrmap[i].intrnum,
 				_intrmap[i].cpunum,
 				_intrmap[i].pin,
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index b4eaf137e4a..4e14972dcfc 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -331,6 +331,11 @@ static struct irqaction irq_call = {
 	.flags		= IRQF_DISABLED|IRQF_PERCPU,
 	.name		= "IPI_call"
 };
+
+static int gic_resched_int_base;
+static int gic_call_int_base;
+#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
 #endif /* CONFIG_MIPS_MT_SMP */
 
 static struct irqaction i8259irq = {
@@ -370,7 +375,7 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
  * Interrupts and CPUs/Core Interrupts. The nature of the External
  * Interrupts is also defined here - polarity/trigger.
  */
-static struct gic_intr_map gic_intr_map[] = {
+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 	{ GIC_EXT_INTR(0), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(1), 	X,	X,		X, 		X,		0 },
 	{ GIC_EXT_INTR(2), 	X,	X,		X, 		X,		0 },
@@ -387,14 +392,7 @@ static struct gic_intr_map gic_intr_map[] = {
 	{ GIC_EXT_INTR(13), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(14), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
 	{ GIC_EXT_INTR(15), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(16), 	0,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(17), 	0,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(18), 	1,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(19), 	1,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(20), 	2,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(21), 	2,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+/* This is the end of the general interrupts now we do IPI ones */
 };
 #endif
 
@@ -416,14 +414,25 @@ static int __init gcmp_probe(unsigned long addr, unsigned long size)
 }
 
 #if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
+{
+	int intr = baseintr + cpu;
+	gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
+	gic_intr_map[intr].cpunum = cpu;
+	gic_intr_map[intr].pin = cpupin;
+	gic_intr_map[intr].polarity = GIC_POL_POS;
+	gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
+	gic_intr_map[intr].ipiflag = 1;
+	ipi_map[cpu] |= (1 << (cpupin + 2));
+}
+
 static void __init fill_ipi_map(void)
 {
-	int i;
+	int cpu;
 
-	for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
-		if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
-			ipi_map[gic_intr_map[i].cpunum] |=
-				(1 << (gic_intr_map[i].pin + 2));
+	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+		fill_ipi_map1(gic_resched_int_base, cpu, GIC_CPU_INT1);
+		fill_ipi_map1(gic_call_int_base, cpu, GIC_CPU_INT2);
 	}
 }
 #endif
@@ -514,24 +523,10 @@ void __init arch_init_irq(void)
 	if (gic_present) {
 		/* FIXME */
 		int i;
-		struct {
-			unsigned int resched;
-			unsigned int call;
-		} ipiirq[] = {
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE0},
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE1
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE2
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
-			}
-		};
+
+		gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
+		gic_resched_int_base = gic_call_int_base - NR_CPUS;
+
 		fill_ipi_map();
 		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
 		if (!gcmp_present) {
@@ -553,12 +548,15 @@ void __init arch_init_irq(void)
 		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
 		write_c0_status(0x1100dc00);
 		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+		for (i = 0; i < NR_CPUS; i++) {
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), &irq_resched);
+			setup_irq(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), &irq_call);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_RESCHED_INT(i), handle_percpu_irq);
+			set_irq_handler(MIPS_GIC_IRQ_BASE +
+					GIC_CALL_INT(i), handle_percpu_irq);
 		}
 	} else {
 		/* set up ipi interrupts */
-- 
cgit v1.2.3


From 0365070f05f12f1648b4adf22cfb52ec7a8a371c Mon Sep 17 00:00:00 2001
From: Tim Anderson <tanderson@mvista.com>
Date: Wed, 17 Jun 2009 16:22:53 -0700
Subject: MIPS: CMP: activate CMP support

Most of the CMP support was added before, this mostly correct compile
problems but adds a platform specific translation for the interrupt number
based on cpu number.

Signed-off-by: Tim Anderson <tanderson@mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig               |  2 +-
 arch/mips/include/asm/amon.h    |  7 +++++
 arch/mips/include/asm/gic.h     |  2 ++
 arch/mips/kernel/smp-cmp.c      | 66 ++++-------------------------------------
 arch/mips/mti-malta/malta-int.c | 10 +++++++
 5 files changed, 25 insertions(+), 62 deletions(-)
 create mode 100644 arch/mips/include/asm/amon.h

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 64891f74019..4368a723e2d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -229,7 +229,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
+	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
diff --git a/arch/mips/include/asm/amon.h b/arch/mips/include/asm/amon.h
new file mode 100644
index 00000000000..c3dc1a68dd8
--- /dev/null
+++ b/arch/mips/include/asm/amon.h
@@ -0,0 +1,7 @@
+/*
+ * Amon support
+ */
+
+int amon_cpu_avail(int);
+void amon_cpu_start(int, unsigned long, unsigned long,
+		    unsigned long, unsigned long);
diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index e8fdd92c52c..10292e37c1f 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -487,5 +487,7 @@ extern void gic_init(unsigned long gic_base_addr,
 
 extern unsigned int gic_get_int(void);
 extern void gic_send_ipi(unsigned int intr);
+extern unsigned int plat_ipi_call_int_xlate(unsigned int);
+extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
 
 #endif /* _ASM_GICREGS_H */
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index 653be061b9e..ad0ff5dc4d5 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -37,80 +37,24 @@
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/mips_mt.h>
-
-/*
- * Crude manipulation of the CPU masks to control which
- * which CPU's are brought online during initialisation
- *
- * Beware... this needs to be called after CPU discovery
- * but before CPU bringup
- */
-static int __init allowcpus(char *str)
-{
-	cpumask_t cpu_allow_map;
-	char buf[256];
-	int len;
-
-	cpus_clear(cpu_allow_map);
-	if (cpulist_parse(str, &cpu_allow_map) == 0) {
-		cpu_set(0, cpu_allow_map);
-		cpus_and(cpu_possible_map, cpu_possible_map, cpu_allow_map);
-		len = cpulist_scnprintf(buf, sizeof(buf)-1, &cpu_possible_map);
-		buf[len] = '\0';
-		pr_debug("Allowable CPUs: %s\n", buf);
-		return 1;
-	} else
-		return 0;
-}
-__setup("allowcpus=", allowcpus);
+#include <asm/amon.h>
+#include <asm/gic.h>
 
 static void ipi_call_function(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_CALLFNC_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_call_int_xlate(cpu));
 }
 
 
 static void ipi_resched(unsigned int cpu)
 {
-	unsigned int action = 0;
-
 	pr_debug("CPU%d: %s cpu %d status %08x\n",
 		 smp_processor_id(), __func__, cpu, read_c0_status());
 
-	switch (cpu) {
-	case 0:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE0;
-		break;
-	case 1:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE1;
-		break;
-	case 2:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE2;
-		break;
-	case 3:
-		action = GIC_IPI_EXT_INTR_RESCHED_VPE3;
-		break;
-	}
-	gic_send_ipi(action);
+	gic_send_ipi(plat_ipi_resched_int_xlate(cpu));
 }
 
 /*
@@ -206,7 +150,7 @@ static void cmp_boot_secondary(int cpu, struct task_struct *idle)
 			   (unsigned long)(gp + sizeof(struct thread_info)));
 #endif
 
-	amon_cpu_start(cpu, pc, sp, gp, a0);
+	amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0);
 }
 
 /*
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 4e14972dcfc..bc0ba58acfd 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -336,6 +336,16 @@ static int gic_resched_int_base;
 static int gic_call_int_base;
 #define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
 #define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+
+unsigned int plat_ipi_call_int_xlate(unsigned int cpu)
+{
+	return GIC_CALL_INT(cpu);
+}
+
+unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
+{
+	return GIC_RESCHED_INT(cpu);
+}
 #endif /* CONFIG_MIPS_MT_SMP */
 
 static struct irqaction i8259irq = {
-- 
cgit v1.2.3


From 47b178bb69ea4d0043f2df509c714bc5b287f375 Mon Sep 17 00:00:00 2001
From: Tim Anderson <tanderson@mvista.com>
Date: Wed, 17 Jun 2009 16:25:18 -0700
Subject: MIPS: CMP: Move gcmp_probe to before the SMP ops

This is to move the gcmp_probe call to before the use of and selection of
the smp_ops functions. This allows malta with 1004K to work.

Signed-off-by: Tim Anderson <tanderson@mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/gcmpregs.h |  2 ++
 arch/mips/mti-malta/malta-init.c | 14 +++++++++++++-
 arch/mips/mti-malta/malta-int.c  |  5 +----
 3 files changed, 16 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h
index d74a8a4ca86..36fd969d64d 100644
--- a/arch/mips/include/asm/gcmpregs.h
+++ b/arch/mips/include/asm/gcmpregs.h
@@ -114,4 +114,6 @@
 #define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
 #define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
 
+extern int __init gcmp_probe(unsigned long, unsigned long);
+
 #endif /* _ASM_GCMPREGS_H */
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 475038a141a..27c807b67fe 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -30,6 +30,7 @@
 #include <asm/cacheflush.h>
 #include <asm/traps.h>
 
+#include <asm/gcmpregs.h>
 #include <asm/mips-boards/prom.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/bonito64.h>
@@ -192,6 +193,8 @@ extern struct plat_smp_ops msmtc_smp_ops;
 
 void __init prom_init(void)
 {
+	int result;
+
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -358,12 +361,21 @@ void __init prom_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
+	/* Early detection of CMP support */
+	result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+
 #ifdef CONFIG_MIPS_CMP
-	register_smp_ops(&cmp_smp_ops);
+	if (result)
+		register_smp_ops(&cmp_smp_ops);
 #endif
 #ifdef CONFIG_MIPS_MT_SMP
+#ifdef CONFIG_MIPS_CMP
+	if (!result)
+		register_smp_ops(&vsmp_smp_ops);
+#else
 	register_smp_ops(&vsmp_smp_ops);
 #endif
+#endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	register_smp_ops(&msmtc_smp_ops);
 #endif
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index bc0ba58acfd..a8756f82c31 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -409,7 +409,7 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 /*
  * GCMP needs to be detected before any SMP initialisation
  */
-static int __init gcmp_probe(unsigned long addr, unsigned long size)
+int __init gcmp_probe(unsigned long addr, unsigned long size)
 {
 	if (gcmp_present >= 0)
 		return gcmp_present;
@@ -449,14 +449,11 @@ static void __init fill_ipi_map(void)
 
 void __init arch_init_irq(void)
 {
-	int gic_present, gcmp_present;
-
 	init_i8259_irqs();
 
 	if (!cpu_has_veic)
 		mips_cpu_irq_init();
 
-	gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
 	if (gcmp_present)  {
 		GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
 		gic_present = 1;
-- 
cgit v1.2.3


From eb9b5141a9815ef898ef6b6441f733e81c272600 Mon Sep 17 00:00:00 2001
From: Tim Anderson <tanderson@mvista.com>
Date: Wed, 17 Jun 2009 16:40:34 -0700
Subject: MIPS: CMP: Update sync-r4k for current kernel

This revises the sync-4k so it will boot and operate since the removal of
expirelo from the timer code.

Signed-off-by: Tim Anderson <tanderson@mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig           |  2 +-
 arch/mips/kernel/sync-r4k.c | 31 ++++++++++++++++---------------
 2 files changed, 17 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4368a723e2d..df1a92afa56 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1656,7 +1656,7 @@ config MIPS_APSP_KSPD
 config MIPS_CMP
 	bool "MIPS CMP framework support"
 	depends on SYS_SUPPORTS_MIPS_CMP
-	select SYNC_R4K if BROKEN
+	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select WEAK_ORDERING
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 9021108eb9c..05dd170a83f 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -1,7 +1,7 @@
 /*
  * Count register synchronisation.
  *
- * All CPUs will have their count registers synchronised to the CPU0 expirelo
+ * All CPUs will have their count registers synchronised to the CPU0 next time
  * value. This can cause a small timewarp for CPU0. All other CPU's should
  * not have done anything significant (but they may have had interrupts
  * enabled briefly - prom_smp_finish() should not be responsible for enabling
@@ -13,21 +13,22 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irqflags.h>
-#include <linux/r4k-timer.h>
+#include <linux/cpumask.h>
 
+#include <asm/r4k-timer.h>
 #include <asm/atomic.h>
 #include <asm/barrier.h>
-#include <asm/cpumask.h>
 #include <asm/mipsregs.h>
 
-static atomic_t __initdata count_start_flag = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_start = ATOMIC_INIT(0);
-static atomic_t __initdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_start_flag = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_start = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_count_stop = ATOMIC_INIT(0);
+static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0);
 
 #define COUNTON	100
 #define NR_LOOPS 5
 
-void __init synchronise_count_master(void)
+void __cpuinit synchronise_count_master(void)
 {
 	int i;
 	unsigned long flags;
@@ -42,19 +43,20 @@ void __init synchronise_count_master(void)
 	return;
 #endif
 
-	pr_info("Checking COUNT synchronization across %u CPUs: ",
-		num_online_cpus());
+	printk(KERN_INFO "Synchronize counters across %u CPUs: ",
+	       num_online_cpus());
 
 	local_irq_save(flags);
 
 	/*
 	 * Notify the slaves that it's time to start
 	 */
+	atomic_set(&count_reference, read_c0_count());
 	atomic_set(&count_start_flag, 1);
 	smp_wmb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to current timer for all CPU's */
+	initcount = read_c0_count();
 
 	/*
 	 * We loop a few times to get a primed instruction cache,
@@ -106,7 +108,7 @@ void __init synchronise_count_master(void)
 	printk("done.\n");
 }
 
-void __init synchronise_count_slave(void)
+void __cpuinit synchronise_count_slave(void)
 {
 	int i;
 	unsigned long flags;
@@ -131,8 +133,8 @@ void __init synchronise_count_slave(void)
 	while (!atomic_read(&count_start_flag))
 		mb();
 
-	/* Count will be initialised to expirelo for all CPU's */
-	initcount = expirelo;
+	/* Count will be initialised to next expire for all CPU's */
+	initcount = atomic_read(&count_reference);
 
 	ncpus = num_online_cpus();
 	for (i = 0; i < NR_LOOPS; i++) {
@@ -156,4 +158,3 @@ void __init synchronise_count_slave(void)
 	local_irq_restore(flags);
 }
 #undef NR_LOOPS
-#endif
-- 
cgit v1.2.3


From cad9bc69048b073023366ebb0878c1dd64a2c4d9 Mon Sep 17 00:00:00 2001
From: Yong Zhang <yong.zhang@windriver.com>
Date: Wed, 1 Jul 2009 09:35:39 +0800
Subject: MIPS: 64-bit: Fix o32 core dump

If an o32 process generates a core dump on a 64 bit kernel, the core file
will not be correctly recognized. This is because ELF_CORE_COPY_REGS and
ELF_CORE_COPY_TASK_REGS are not correctly defined for o32 and will use
the default register set which would be CONFIG_64BIT in asm/elf.h.

So we'll switch to use the right register defines in this situation by
checking for WANT_COMPAT_REG_H and use the right defines of
ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS.

[Ralf: made ELF_CORE_COPY_TASK_REGS() bullet-proof against funny arguments.]

Signed-off-by: Yong Zhang <yong.zhang@windriver.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/elf.h      |  4 ++++
 arch/mips/include/asm/reg.h      |  2 +-
 arch/mips/kernel/binfmt_elfo32.c | 20 +++++++++++++++++---
 3 files changed, 22 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index d58f128aa74..7990694cda2 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -316,9 +316,13 @@ extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
 extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
 extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 
+#ifndef ELF_CORE_COPY_REGS
 #define ELF_CORE_COPY_REGS(elf_regs, regs)			\
 	elf_dump_regs((elf_greg_t *)&(elf_regs), regs);
+#endif
+#ifndef ELF_CORE_COPY_TASK_REGS
 #define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#endif
 #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs)			\
 	dump_task_fpu(tsk, elf_fpregs)
 
diff --git a/arch/mips/include/asm/reg.h b/arch/mips/include/asm/reg.h
index 634b55d7e7f..910e71a1246 100644
--- a/arch/mips/include/asm/reg.h
+++ b/arch/mips/include/asm/reg.h
@@ -69,7 +69,7 @@
 
 #endif
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && !defined(WANT_COMPAT_REG_H)
 
 #define EF_R0			 0
 #define EF_R1			 1
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index e1333d7319e..ff448233dab 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -53,6 +53,23 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 #define ELF_ET_DYN_BASE         (TASK32_SIZE / 3 * 2)
 
 #include <asm/processor.h>
+
+/*
+ * When this file is selected, we are definitely running a 64bit kernel.
+ * So using the right regs define in asm/reg.h
+ */
+#define WANT_COMPAT_REG_H
+
+/* These MUST be defined before elf.h gets included */
+extern void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs);
+#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
+#define ELF_CORE_COPY_TASK_REGS(_tsk, _dest)				\
+({									\
+	int __res = 1;							\
+	elf32_core_copy_regs(*(_dest), task_pt_regs(_tsk));		\
+	__res;								\
+})
+
 #include <linux/module.h>
 #include <linux/elfcore.h>
 #include <linux/compat.h>
@@ -110,9 +127,6 @@ jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
 	value->tv_usec = rem / NSEC_PER_USEC;
 }
 
-#undef ELF_CORE_COPY_REGS
-#define ELF_CORE_COPY_REGS(_dest, _regs) elf32_core_copy_regs(_dest, _regs);
-
 void elf32_core_copy_regs(elf_gregset_t grp, struct pt_regs *regs)
 {
 	int i;
-- 
cgit v1.2.3


From 3f5b3e17f791ba27f91fc4fdc514e7704d4d6273 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 2 Jul 2009 11:48:07 +0100
Subject: MIPS: Allow suspend and hibernation again on uniprocessor kernels.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 arch/mips/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index df1a92afa56..3ca0fe1a912 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2168,11 +2168,11 @@ menu "Power management options"
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on SYS_SUPPORTS_HOTPLUG_CPU
+	depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
 
 source "kernel/power/Kconfig"
 
-- 
cgit v1.2.3


From ada8e9514b5880f81cdbbd212d121380ceef7acc Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yuasa@linux-mips.org>
Date: Fri, 3 Jul 2009 00:39:38 +0900
Subject: Update Yoichi Yuasa's e-mail address

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cobalt/buttons.c                       | 2 +-
 arch/mips/cobalt/lcd.c                           | 2 +-
 arch/mips/cobalt/led.c                           | 2 +-
 arch/mips/cobalt/mtd.c                           | 2 +-
 arch/mips/cobalt/rtc.c                           | 2 +-
 arch/mips/cobalt/serial.c                        | 2 +-
 arch/mips/cobalt/time.c                          | 2 +-
 arch/mips/gt64120/wrppmc/serial.c                | 2 +-
 arch/mips/include/asm/ds1287.h                   | 2 +-
 arch/mips/include/asm/irq_gt641xx.h              | 2 +-
 arch/mips/include/asm/mach-cobalt/irq.h          | 2 +-
 arch/mips/include/asm/mach-cobalt/mach-gt64120.h | 2 +-
 arch/mips/include/asm/vr41xx/capcella.h          | 2 +-
 arch/mips/include/asm/vr41xx/giu.h               | 2 +-
 arch/mips/include/asm/vr41xx/irq.h               | 2 +-
 arch/mips/include/asm/vr41xx/mpc30x.h            | 2 +-
 arch/mips/include/asm/vr41xx/pci.h               | 2 +-
 arch/mips/include/asm/vr41xx/siu.h               | 2 +-
 arch/mips/include/asm/vr41xx/tb0219.h            | 2 +-
 arch/mips/include/asm/vr41xx/tb0226.h            | 2 +-
 arch/mips/include/asm/vr41xx/vr41xx.h            | 2 +-
 arch/mips/kernel/cevt-ds1287.c                   | 2 +-
 arch/mips/kernel/cevt-gt641xx.c                  | 2 +-
 arch/mips/kernel/csrc-ioasic.c                   | 2 +-
 arch/mips/kernel/irq-gt641xx.c                   | 2 +-
 arch/mips/pci/fixup-capcella.c                   | 2 +-
 arch/mips/pci/fixup-mpc30x.c                     | 2 +-
 arch/mips/pci/fixup-tb0219.c                     | 2 +-
 arch/mips/pci/fixup-tb0226.c                     | 2 +-
 arch/mips/pci/fixup-tb0287.c                     | 2 +-
 arch/mips/pci/ops-vr41xx.c                       | 6 +++---
 arch/mips/pci/pci-vr41xx.c                       | 6 +++---
 arch/mips/pci/pci-vr41xx.h                       | 4 ++--
 arch/mips/vr41xx/casio-e55/setup.c               | 2 +-
 arch/mips/vr41xx/common/bcu.c                    | 8 ++++----
 arch/mips/vr41xx/common/cmu.c                    | 8 ++++----
 arch/mips/vr41xx/common/giu.c                    | 2 +-
 arch/mips/vr41xx/common/icu.c                    | 8 ++++----
 arch/mips/vr41xx/common/init.c                   | 2 +-
 arch/mips/vr41xx/common/irq.c                    | 2 +-
 arch/mips/vr41xx/common/pmu.c                    | 2 +-
 arch/mips/vr41xx/common/rtc.c                    | 2 +-
 arch/mips/vr41xx/common/siu.c                    | 2 +-
 arch/mips/vr41xx/common/type.c                   | 2 +-
 arch/mips/vr41xx/ibm-workpad/setup.c             | 2 +-
 45 files changed, 59 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/cobalt/buttons.c b/arch/mips/cobalt/buttons.c
index 9e143989c7b..4eaec8b46e0 100644
--- a/arch/mips/cobalt/buttons.c
+++ b/arch/mips/cobalt/buttons.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt buttons platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
index 0720e4fae31..0f1cd90f37e 100644
--- a/arch/mips/cobalt/lcd.c
+++ b/arch/mips/cobalt/lcd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LCD platform device.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/led.c b/arch/mips/cobalt/led.c
index 1c6ebd468b0..d3ce6fa1dc7 100644
--- a/arch/mips/cobalt/led.c
+++ b/arch/mips/cobalt/led.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt LED platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
index 2b088ef3839..691d620b676 100644
--- a/arch/mips/cobalt/mtd.c
+++ b/arch/mips/cobalt/mtd.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt MTD device.
  *
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/rtc.c b/arch/mips/cobalt/rtc.c
index e70794b8bcb..3ab39898b4e 100644
--- a/arch/mips/cobalt/rtc.c
+++ b/arch/mips/cobalt/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/serial.c b/arch/mips/cobalt/serial.c
index 53b8d0d6da9..7cb51f57275 100644
--- a/arch/mips/cobalt/serial.c
+++ b/arch/mips/cobalt/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of Cobalt UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/cobalt/time.c b/arch/mips/cobalt/time.c
index 4a570e7145f..0162f9edc69 100644
--- a/arch/mips/cobalt/time.c
+++ b/arch/mips/cobalt/time.c
@@ -1,7 +1,7 @@
 /*
  *  Cobalt time initialization.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/gt64120/wrppmc/serial.c
index 5ec1c2ffd3a..6f9d0858f59 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/gt64120/wrppmc/serial.c
@@ -1,7 +1,7 @@
 /*
  *  Registration of WRPPMC UART platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/ds1287.h b/arch/mips/include/asm/ds1287.h
index ba1702e8693..3af0b8fb3b8 100644
--- a/arch/mips/include/asm/ds1287.h
+++ b/arch/mips/include/asm/ds1287.h
@@ -1,7 +1,7 @@
 /*
  *  DS1287 timer functions.
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/irq_gt641xx.h b/arch/mips/include/asm/irq_gt641xx.h
index f9a7c3ac2e6..250a2407b59 100644
--- a/arch/mips/include/asm/irq_gt641xx.h
+++ b/arch/mips/include/asm/irq_gt641xx.h
@@ -1,7 +1,7 @@
 /*
  *  Galileo/Marvell GT641xx IRQ definitions.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/mach-cobalt/irq.h b/arch/mips/include/asm/mach-cobalt/irq.h
index 57c8c9ac585..9da9acf5dcb 100644
--- a/arch/mips/include/asm/mach-cobalt/irq.h
+++ b/arch/mips/include/asm/mach-cobalt/irq.h
@@ -8,7 +8,7 @@
  * Copyright (C) 1997 Cobalt Microserver
  * Copyright (C) 1997, 2003 Ralf Baechle
  * Copyright (C) 2001-2003 Liam Davies (ldavies@agile.tv)
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org>
  */
 #ifndef _ASM_COBALT_IRQ_H
 #define _ASM_COBALT_IRQ_H
diff --git a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
index ae9c5523c7e..f8afec3f294 100644
--- a/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
+++ b/arch/mips/include/asm/mach-cobalt/mach-gt64120.h
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/capcella.h b/arch/mips/include/asm/vr41xx/capcella.h
index e0ee05a3dfc..fcc6569414f 100644
--- a/arch/mips/include/asm/vr41xx/capcella.h
+++ b/arch/mips/include/asm/vr41xx/capcella.h
@@ -1,7 +1,7 @@
 /*
  *  capcella.h, Include file for ZAO Networks Capcella.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/giu.h b/arch/mips/include/asm/vr41xx/giu.h
index b369c091b0e..6a90bc1d916 100644
--- a/arch/mips/include/asm/vr41xx/giu.h
+++ b/arch/mips/include/asm/vr41xx/giu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series General-purpose I/O Unit.
  *
- *  Copyright (C) 2005-2009  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2009  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/irq.h b/arch/mips/include/asm/vr41xx/irq.h
index d315dfbc08f..b07f7321751 100644
--- a/arch/mips/include/asm/vr41xx/irq.h
+++ b/arch/mips/include/asm/vr41xx/irq.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/include/asm/vr41xx/mpc30x.h b/arch/mips/include/asm/vr41xx/mpc30x.h
index 1d67df843dc..130d09d8c8c 100644
--- a/arch/mips/include/asm/vr41xx/mpc30x.h
+++ b/arch/mips/include/asm/vr41xx/mpc30x.h
@@ -1,7 +1,7 @@
 /*
  *  mpc30x.h, Include file for Victor MP-C303/304.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/pci.h b/arch/mips/include/asm/vr41xx/pci.h
index 6fc01ce1977..c231a3d6cfd 100644
--- a/arch/mips/include/asm/vr41xx/pci.h
+++ b/arch/mips/include/asm/vr41xx/pci.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series PCI Control Unit.
  *
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/siu.h b/arch/mips/include/asm/vr41xx/siu.h
index da9f6e37340..ca806bc4ddc 100644
--- a/arch/mips/include/asm/vr41xx/siu.h
+++ b/arch/mips/include/asm/vr41xx/siu.h
@@ -1,7 +1,7 @@
 /*
  *  Include file for NEC VR4100 series Serial Interface Unit.
  *
- *  Copyright (C) 2005-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/tb0219.h b/arch/mips/include/asm/vr41xx/tb0219.h
index dc981b4be0a..c78e8243b44 100644
--- a/arch/mips/include/asm/vr41xx/tb0219.h
+++ b/arch/mips/include/asm/vr41xx/tb0219.h
@@ -1,7 +1,7 @@
 /*
  *  tb0219.h, Include file for TANBAC TB0219.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  Modified for TANBAC TB0219:
  *  Copyright (C) 2003 Megasolution Inc.  <matsu@megasolution.jp>
diff --git a/arch/mips/include/asm/vr41xx/tb0226.h b/arch/mips/include/asm/vr41xx/tb0226.h
index de527dcfa5f..36f5f798e41 100644
--- a/arch/mips/include/asm/vr41xx/tb0226.h
+++ b/arch/mips/include/asm/vr41xx/tb0226.h
@@ -1,7 +1,7 @@
 /*
  *  tb0226.h, Include file for TANBAC TB0226.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/include/asm/vr41xx/vr41xx.h b/arch/mips/include/asm/vr41xx/vr41xx.h
index 22be64971cc..7b96a43b72b 100644
--- a/arch/mips/include/asm/vr41xx/vr41xx.h
+++ b/arch/mips/include/asm/vr41xx/vr41xx.h
@@ -7,7 +7,7 @@
  * Copyright (C) 2001, 2002 Paul Mundt
  * Copyright (C) 2002 MontaVista Software, Inc.
  * Copyright (C) 2002 TimeSys Corp.
- * Copyright (C) 2003-2008 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2008 Yoichi Yuasa <yuasa@linux-mips.org>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c
index 1ada45ea070..6996da4d74a 100644
--- a/arch/mips/kernel/cevt-ds1287.c
+++ b/arch/mips/kernel/cevt-ds1287.c
@@ -1,7 +1,7 @@
 /*
  *  DS1287 clockevent driver
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c
index e9b787feedc..92351e00ae0 100644
--- a/arch/mips/kernel/cevt-gt641xx.c
+++ b/arch/mips/kernel/cevt-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx clockevent routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c
index b551f48d3a0..23da108506b 100644
--- a/arch/mips/kernel/csrc-ioasic.c
+++ b/arch/mips/kernel/csrc-ioasic.c
@@ -1,7 +1,7 @@
 /*
  *  DEC I/O ASIC's counter clocksource
  *
- *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c
index 1b81b131f43..ebcc5f7ad9c 100644
--- a/arch/mips/kernel/irq-gt641xx.c
+++ b/arch/mips/kernel/irq-gt641xx.c
@@ -1,7 +1,7 @@
 /*
  *  GT641xx IRQ routines.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-capcella.c b/arch/mips/pci/fixup-capcella.c
index 1416bca6d1a..1c02f573736 100644
--- a/arch/mips/pci/fixup-capcella.c
+++ b/arch/mips/pci/fixup-capcella.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-cappcela.c, The ZAO Networks Capcella specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c
index 59115962572..e08f49cb687 100644
--- a/arch/mips/pci/fixup-mpc30x.c
+++ b/arch/mips/pci/fixup-mpc30x.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-mpc30x.c, The Victor MP-C303/304 specific PCI fixups.
  *
- *  Copyright (C) 2002,2004  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002,2004  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0219.c b/arch/mips/pci/fixup-tb0219.c
index ed87733f679..8084b17d440 100644
--- a/arch/mips/pci/fixup-tb0219.c
+++ b/arch/mips/pci/fixup-tb0219.c
@@ -2,7 +2,7 @@
  *  fixup-tb0219.c, The TANBAC TB0219 specific PCI fixups.
  *
  *  Copyright (C) 2003  Megasolution Inc. <matsu@megasolution.jp>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0226.c b/arch/mips/pci/fixup-tb0226.c
index e3eedf4bf9b..4196ccf3ea3 100644
--- a/arch/mips/pci/fixup-tb0226.c
+++ b/arch/mips/pci/fixup-tb0226.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
  *
- *  Copyright (C) 2002-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/fixup-tb0287.c b/arch/mips/pci/fixup-tb0287.c
index 267ab3dc3d4..2fe29db4372 100644
--- a/arch/mips/pci/fixup-tb0287.c
+++ b/arch/mips/pci/fixup-tb0287.c
@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0287.c, The TANBAC TB0287 specific PCI fixups.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/pci/ops-vr41xx.c b/arch/mips/pci/ops-vr41xx.c
index 900c6b32576..28962a7c660 100644
--- a/arch/mips/pci/ops-vr41xx.c
+++ b/arch/mips/pci/ops-vr41xx.c
@@ -2,8 +2,8 @@
  *  ops-vr41xx.c, PCI configuration routines for the PCIU of NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,7 +21,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/pci.h>
diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c
index d1e049b55f3..56525711f8b 100644
--- a/arch/mips/pci/pci-vr41xx.c
+++ b/arch/mips/pci/pci-vr41xx.c
@@ -2,8 +2,8 @@
  *  pci-vr41xx.c, PCI Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *  Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -22,7 +22,7 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  */
 #include <linux/init.h>
diff --git a/arch/mips/pci/pci-vr41xx.h b/arch/mips/pci/pci-vr41xx.h
index 8a35e32b837..6b1ae2eb1c0 100644
--- a/arch/mips/pci/pci-vr41xx.h
+++ b/arch/mips/pci/pci-vr41xx.h
@@ -2,8 +2,8 @@
  *  pci-vr41xx.h, Include file for PCI Control Unit of the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2004-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/casio-e55/setup.c b/arch/mips/vr41xx/casio-e55/setup.c
index 6d9bab89058..719f4a5b984 100644
--- a/arch/mips/vr41xx/casio-e55/setup.c
+++ b/arch/mips/vr41xx/casio-e55/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the CASIO CASSIOPEIA E-11/15/55/65.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/bcu.c b/arch/mips/vr41xx/common/bcu.c
index d77c330a0d5..6346c59c9f9 100644
--- a/arch/mips/vr41xx/common/bcu.c
+++ b/arch/mips/vr41xx/common/bcu.c
@@ -2,8 +2,8 @@
  *  bcu.c, Bus Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *  Copyright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/kernel.h>
diff --git a/arch/mips/vr41xx/common/cmu.c b/arch/mips/vr41xx/common/cmu.c
index ad0e8e3409d..8ba7d04a5ec 100644
--- a/arch/mips/vr41xx/common/cmu.c
+++ b/arch/mips/vr41xx/common/cmu.c
@@ -2,8 +2,8 @@
  *  cmu.c, Clock Mask Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copuright (C) 2003-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copuright (C) 2003-2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Added support for NEC VR4133.
  */
 #include <linux/init.h>
diff --git a/arch/mips/vr41xx/common/giu.c b/arch/mips/vr41xx/common/giu.c
index 2b272f1496f..22cc6f2100a 100644
--- a/arch/mips/vr41xx/common/giu.c
+++ b/arch/mips/vr41xx/common/giu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series GIU platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/icu.c b/arch/mips/vr41xx/common/icu.c
index 3f23d9fda66..6d39e222b17 100644
--- a/arch/mips/vr41xx/common/icu.c
+++ b/arch/mips/vr41xx/common/icu.c
@@ -2,8 +2,8 @@
  *  icu.c, Interrupt Control Unit routines for the NEC VR4100 series.
  *
  *  Copyright (C) 2001-2002  MontaVista Software Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2003-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *    Author: Yoichi Yuasa <source@mvista.com>
+ *  Copyright (C) 2003-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@
  */
 /*
  * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
+ *  MontaVista Software Inc. <source@mvista.com>
  *  - New creation, NEC VR4122 and VR4131 are supported.
  *  - Added support for NEC VR4111 and VR4121.
  *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Yoichi Yuasa <yuasa@linux-mips.org>
  *  - Coped with INTASSIGN of NEC VR4133.
  */
 #include <linux/errno.h>
diff --git a/arch/mips/vr41xx/common/init.c b/arch/mips/vr41xx/common/init.c
index c64995342ba..1386e6f081c 100644
--- a/arch/mips/vr41xx/common/init.c
+++ b/arch/mips/vr41xx/common/init.c
@@ -1,7 +1,7 @@
 /*
  *  init.c, Common initialization routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 9cc389109b1..bef06872f01 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -1,7 +1,7 @@
 /*
  *  Interrupt handing routines for NEC VR4100 series.
  *
- *  Copyright (C) 2005-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
index 028aaf75eb2..692b4e85b7f 100644
--- a/arch/mips/vr41xx/common/pmu.c
+++ b/arch/mips/vr41xx/common/pmu.c
@@ -1,7 +1,7 @@
 /*
  *  pmu.c, Power Management Unit routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2003-2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/rtc.c b/arch/mips/vr41xx/common/rtc.c
index 9f26c14edca..ebc5dcf0ed8 100644
--- a/arch/mips/vr41xx/common/rtc.c
+++ b/arch/mips/vr41xx/common/rtc.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series RTC platform device.
  *
- *  Copyright (C) 2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/siu.c b/arch/mips/vr41xx/common/siu.c
index 654dee6208b..54eae56108f 100644
--- a/arch/mips/vr41xx/common/siu.c
+++ b/arch/mips/vr41xx/common/siu.c
@@ -1,7 +1,7 @@
 /*
  *  NEC VR4100 series SIU platform device.
  *
- *  Copyright (C) 2007-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/common/type.c b/arch/mips/vr41xx/common/type.c
index e0c1ac5e988..ff841422b63 100644
--- a/arch/mips/vr41xx/common/type.c
+++ b/arch/mips/vr41xx/common/type.c
@@ -1,7 +1,7 @@
 /*
  *  type.c, System type for NEC VR4100 series.
  *
- *  Copyright (C) 2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2005  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/arch/mips/vr41xx/ibm-workpad/setup.c b/arch/mips/vr41xx/ibm-workpad/setup.c
index 9eef297eca1..3982f378a3e 100644
--- a/arch/mips/vr41xx/ibm-workpad/setup.c
+++ b/arch/mips/vr41xx/ibm-workpad/setup.c
@@ -1,7 +1,7 @@
 /*
  *  setup.c, Setup for the IBM WorkPad z50.
  *
- *  Copyright (C) 2002-2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2002-2006  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
-- 
cgit v1.2.3


From 01a6221a6a51ec47b9ae3ed42c396f98dd488c7e Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Mon, 29 Jun 2009 17:18:51 -0700
Subject: MIPS: Reorganize Cavium OCTEON PCI support.

Move the cavium PCI files to the arch/mips/pci directory.  Also cleanup
comment formatting and code layout.  Code from pci-common.c, was moved
into other files.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/Makefile          |    4 -
 arch/mips/cavium-octeon/dma-octeon.c      |    2 +-
 arch/mips/cavium-octeon/msi.c             |  288 ------
 arch/mips/cavium-octeon/pci-common.c      |  137 ---
 arch/mips/cavium-octeon/pci-common.h      |   39 -
 arch/mips/cavium-octeon/pci.c             |  568 ------------
 arch/mips/cavium-octeon/pcie.c            | 1370 -----------------------------
 arch/mips/include/asm/octeon/pci-octeon.h |   45 +
 arch/mips/pci/Makefile                    |    5 +
 arch/mips/pci/msi-octeon.c                |  288 ++++++
 arch/mips/pci/pci-octeon.c                |  675 ++++++++++++++
 arch/mips/pci/pcie-octeon.c               | 1369 ++++++++++++++++++++++++++++
 12 files changed, 2383 insertions(+), 2407 deletions(-)
 delete mode 100644 arch/mips/cavium-octeon/msi.c
 delete mode 100644 arch/mips/cavium-octeon/pci-common.c
 delete mode 100644 arch/mips/cavium-octeon/pci-common.h
 delete mode 100644 arch/mips/cavium-octeon/pci.c
 delete mode 100644 arch/mips/cavium-octeon/pcie.c
 create mode 100644 arch/mips/include/asm/octeon/pci-octeon.h
 create mode 100644 arch/mips/pci/msi-octeon.c
 create mode 100644 arch/mips/pci/pci-octeon.c
 create mode 100644 arch/mips/pci/pcie-octeon.c

(limited to 'arch')

diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 7c0528b0e34..d6903c3f3d5 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -14,9 +14,5 @@ obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 
 obj-$(CONFIG_SMP)                     += smp.o
-obj-$(CONFIG_PCI)                     += pci-common.o
-obj-$(CONFIG_PCI)                     += pci.o
-obj-$(CONFIG_PCI)                     += pcie.o
-obj-$(CONFIG_PCI_MSI)                 += msi.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 627c162a615..4b92bfc662d 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -29,7 +29,7 @@
 #include <dma-coherence.h>
 
 #ifdef CONFIG_PCI
-#include "pci-common.h"
+#include <asm/octeon/pci-octeon.h>
 #endif
 
 #define BAR2_PCI_ADDRESS 0x8000000000ul
diff --git a/arch/mips/cavium-octeon/msi.c b/arch/mips/cavium-octeon/msi.c
deleted file mode 100644
index 964b03b75a8..00000000000
--- a/arch/mips/cavium-octeon/msi.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/msi.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-
-#include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-npi-defs.h>
-#include <asm/octeon/cvmx-pci-defs.h>
-#include <asm/octeon/cvmx-npei-defs.h>
-#include <asm/octeon/cvmx-pexp-defs.h>
-
-#include "pci-common.h"
-
-/*
- * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
- * in use.
- */
-static uint64_t msi_free_irq_bitmask;
-
-/*
- * Each bit in msi_multiple_irq_bitmask tells that the device using
- * this bit in msi_free_irq_bitmask is also using the next bit. This
- * is used so we can disable all of the MSI interrupts when a device
- * uses multiple.
- */
-static uint64_t msi_multiple_irq_bitmask;
-
-/*
- * This lock controls updates to msi_free_irq_bitmask and
- * msi_multiple_irq_bitmask.
- */
-static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);
-
-
-/**
- * Called when a driver request MSI interrupts instead of the
- * legacy INT A-D. This routine will allocate multiple interrupts
- * for MSI devices that support them. A device can override this by
- * programming the MSI control bits [6:4] before calling
- * pci_enable_msi().
- *
- * @param dev    Device requesting MSI interrupts
- * @param desc   MSI descriptor
- *
- * Returns 0 on success.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_msg msg;
-	uint16_t control;
-	int configured_private_bits;
-	int request_private_bits;
-	int irq;
-	int irq_step;
-	uint64_t search_mask;
-
-	/*
-	 * Read the MSI config to figure out how many IRQs this device
-	 * wants.  Most devices only want 1, which will give
-	 * configured_private_bits and request_private_bits equal 0.
-	 */
-	pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
-			     &control);
-
-	/*
-	 * If the number of private bits has been configured then use
-	 * that value instead of the requested number. This gives the
-	 * driver the chance to override the number of interrupts
-	 * before calling pci_enable_msi().
-	 */
-	configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
-	if (configured_private_bits == 0) {
-		/* Nothing is configured, so use the hardware requested size */
-		request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
-	} else {
-		/*
-		 * Use the number of configured bits, assuming the
-		 * driver wanted to override the hardware request
-		 * value.
-		 */
-		request_private_bits = configured_private_bits;
-	}
-
-	/*
-	 * The PCI 2.3 spec mandates that there are at most 32
-	 * interrupts. If this device asks for more, only give it one.
-	 */
-	if (request_private_bits > 5)
-		request_private_bits = 0;
-
-try_only_one:
-	/*
-	 * The IRQs have to be aligned on a power of two based on the
-	 * number being requested.
-	 */
-	irq_step = 1 << request_private_bits;
-
-	/* Mask with one bit for each IRQ */
-	search_mask = (1 << irq_step) - 1;
-
-	/*
-	 * We're going to search msi_free_irq_bitmask_lock for zero
-	 * bits. This represents an MSI interrupt number that isn't in
-	 * use.
-	 */
-	spin_lock(&msi_free_irq_bitmask_lock);
-	for (irq = 0; irq < 64; irq += irq_step) {
-		if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) {
-			msi_free_irq_bitmask |= search_mask << irq;
-			msi_multiple_irq_bitmask |= (search_mask >> 1) << irq;
-			break;
-		}
-	}
-	spin_unlock(&msi_free_irq_bitmask_lock);
-
-	/* Make sure the search for available interrupts didn't fail */
-	if (irq >= 64) {
-		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free "
-			       "interrupts, trying just one",
-			       1 << request_private_bits);
-			request_private_bits = 0;
-			goto try_only_one;
-		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI "
-			      "interrupt");
-	}
-
-	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
-	irq += OCTEON_IRQ_MSI_BIT0;
-
-	switch (octeon_dma_bar_type) {
-	case OCTEON_DMA_BAR_TYPE_SMALL:
-		/* When not using big bar, Bar 0 is based at 128MB */
-		msg.address_lo =
-			((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff;
-		msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32;
-	case OCTEON_DMA_BAR_TYPE_BIG:
-		/* When using big bar, Bar 0 is based at 0 */
-		msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff;
-		msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32;
-		break;
-	case OCTEON_DMA_BAR_TYPE_PCIE:
-		/* When using PCIe, Bar 0 is based at 0 */
-		/* FIXME CVMX_NPEI_MSI_RCV* other than 0? */
-		msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff;
-		msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32;
-		break;
-	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n");
-	}
-	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
-
-	/* Update the number of IRQs the device has available to it */
-	control &= ~PCI_MSI_FLAGS_QSIZE;
-	control |= request_private_bits << 4;
-	pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
-			      control);
-
-	set_irq_msi(irq, desc);
-	write_msi_msg(irq, &msg);
-	return 0;
-}
-
-
-/**
- * Called when a device no longer needs its MSI interrupts. All
- * MSI interrupts for the device are freed.
- *
- * @irq:    The devices first irq number. There may be multple in sequence.
- */
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	int number_irqs;
-	uint64_t bitmask;
-
-	if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
-	irq -= OCTEON_IRQ_MSI_BIT0;
-
-	/*
-	 * Count the number of IRQs we need to free by looking at the
-	 * msi_multiple_irq_bitmask. Each bit set means that the next
-	 * IRQ is also owned by this device.
-	 */
-	number_irqs = 0;
-	while ((irq+number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs))))
-		number_irqs++;
-	number_irqs++;
-	/* Mask with one bit for each IRQ */
-	bitmask = (1 << number_irqs) - 1;
-	/* Shift the mask to the correct bit location */
-	bitmask <<= irq;
-	if ((msi_free_irq_bitmask & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
-
-	/* Checks are done, update the in use bitmask */
-	spin_lock(&msi_free_irq_bitmask_lock);
-	msi_free_irq_bitmask &= ~bitmask;
-	msi_multiple_irq_bitmask &= ~bitmask;
-	spin_unlock(&msi_free_irq_bitmask_lock);
-}
-
-
-/**
- * Called by the interrupt handling code when an MSI interrupt
- * occurs.
- *
- * @param cpl
- * @param dev_id
- *
- * @return
- */
-static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
-{
-	uint64_t msi_bits;
-	int irq;
-
-	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE)
-		msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0);
-	else
-		msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV);
-	irq = fls64(msi_bits);
-	if (irq) {
-		irq += OCTEON_IRQ_MSI_BIT0 - 1;
-		if (irq_desc[irq].action) {
-			do_IRQ(irq);
-			return IRQ_HANDLED;
-		} else {
-			pr_err("Spurious MSI interrupt %d\n", irq);
-			if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-				/* These chips have PCIe */
-				cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0,
-					       1ull << (irq -
-							OCTEON_IRQ_MSI_BIT0));
-			} else {
-				/* These chips have PCI */
-				cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV,
-					       1ull << (irq -
-							OCTEON_IRQ_MSI_BIT0));
-			}
-		}
-	}
-	return IRQ_NONE;
-}
-
-
-/**
- * Initializes the MSI interrupt handling code
- *
- * @return
- */
-int octeon_msi_initialize(void)
-{
-	int r;
-	if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
-				IRQF_SHARED,
-				"MSI[0:63]", octeon_msi_interrupt);
-	} else if (octeon_is_pci_host()) {
-		r = request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
-				IRQF_SHARED,
-				"MSI[0:15]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[16:31]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[32:47]", octeon_msi_interrupt);
-		r += request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
-				 IRQF_SHARED,
-				 "MSI[48:63]", octeon_msi_interrupt);
-	}
-	return 0;
-}
-
-subsys_initcall(octeon_msi_initialize);
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f88da7..00000000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (octeon_pcibios_map_irq)
-		return octeon_pcibios_map_irq(dev, slot, pin);
-	else
-		panic("octeon_pcibios_map_irq doesn't point to a "
-		      "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	uint16_t config;
-	uint32_t dconfig;
-	int pos;
-	/*
-	 * Force the Cache line setting to 64 bytes. The standard
-	 * Linux bus scan doesn't seem to set it. Octeon really has
-	 * 128 byte lines, but Intel bridges get really upset if you
-	 * try and set values above 64 bytes. Value is specified in
-	 * 32bit words.
-	 */
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
-	/* Set latency timers for all devices */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
-	/* Enable reporting System errors and parity errors on all devices */
-	/* Enable parity checking and error reporting */
-	pci_read_config_word(dev, PCI_COMMAND, &config);
-	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	pci_write_config_word(dev, PCI_COMMAND, config);
-
-	if (dev->subordinate) {
-		/* Set latency timers on sub bridges */
-		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
-		/* More bridge error detection */
-		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
-		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
-	}
-
-	/* Enable the PCIe normal error reporting */
-	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
-	if (pos) {
-		/* Update Device Control */
-		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
-		/* Correctable Error Reporting */
-		config |= PCI_EXP_DEVCTL_CERE;
-		/* Non-Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_NFERE;
-		/* Fatal Error Reporting */
-		config |= PCI_EXP_DEVCTL_FERE;
-		/* Unsupported Request */
-		config |= PCI_EXP_DEVCTL_URRE;
-		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
-	}
-
-	/* Find the Advanced Error Reporting capability */
-	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
-	if (pos) {
-		/* Clear Uncorrectable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				      &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
-				       dconfig);
-		/* Enable reporting of all uncorrectable errors */
-		/* Uncorrectable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
-		/*
-		 * Leave severity at HW default. This only controls if
-		 * errors are reported as uncorrectable or
-		 * correctable, not if the error is reported.
-		 */
-		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
-		/* Clear Correctable Error Status */
-		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
-		/* Enable reporting of all correctable errors */
-		/* Correctable Error Mask - turned on bits disable errors */
-		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
-		/* Advanced Error Capabilities */
-		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
-		/* ECRC Generation Enable */
-		if (config & PCI_ERR_CAP_ECRC_GENC)
-			config |= PCI_ERR_CAP_ECRC_GENE;
-		/* ECRC Check Enable */
-		if (config & PCI_ERR_CAP_ECRC_CHKC)
-			config |= PCI_ERR_CAP_ECRC_CHKE;
-		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
-		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
-		/* Report all errors to the root complex */
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
-				       PCI_ERR_ROOT_CMD_COR_EN |
-				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
-				       PCI_ERR_ROOT_CMD_FATAL_EN);
-		/* Clear the Root status register */
-		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
-		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
-	}
-
-	return 0;
-}
diff --git a/arch/mips/cavium-octeon/pci-common.h b/arch/mips/cavium-octeon/pci-common.h
deleted file mode 100644
index 74ae79991e4..00000000000
--- a/arch/mips/cavium-octeon/pci-common.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#ifndef __OCTEON_PCI_COMMON_H__
-#define __OCTEON_PCI_COMMON_H__
-
-#include <linux/pci.h>
-
-/* Some PCI cards require delays when accessing config space. */
-#define PCI_CONFIG_SPACE_DELAY 10000
-
-/* pcibios_map_irq() is defined inside pci-common.c. All it does is call the
-   Octeon specific version pointed to by this variable. This function needs to
-   change for PCI or PCIe based hosts */
-extern typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-
-/* The following defines are only used when octeon_dma_bar_type =
-   OCTEON_DMA_BAR_TYPE_BIG */
-#define OCTEON_PCI_BAR1_HOLE_BITS 5
-#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
-
-enum octeon_dma_bar_type {
-	OCTEON_DMA_BAR_TYPE_INVALID,
-	OCTEON_DMA_BAR_TYPE_SMALL,
-	OCTEON_DMA_BAR_TYPE_BIG,
-	OCTEON_DMA_BAR_TYPE_PCIE
-};
-
-/**
- * This is a variable to tell the DMA mapping system in dma-octeon.c
- * how to map PCI DMA addresses.
- */
-extern enum octeon_dma_bar_type octeon_dma_bar_type;
-
-#endif
diff --git a/arch/mips/cavium-octeon/pci.c b/arch/mips/cavium-octeon/pci.c
deleted file mode 100644
index 67c0ff5e92f..00000000000
--- a/arch/mips/cavium-octeon/pci.c
+++ /dev/null
@@ -1,568 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-
-#include <asm/time.h>
-
-#include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-npi-defs.h>
-#include <asm/octeon/cvmx-pci-defs.h>
-
-#include "pci-common.h"
-
-#define USE_OCTEON_INTERNAL_ARBITER
-
-/*
- * Octeon's PCI controller uses did=3, subdid=2 for PCI IO
- * addresses. Use PCI endian swapping 1 so no address swapping is
- * necessary. The Linux io routines will endian swap the data.
- */
-#define OCTEON_PCI_IOSPACE_BASE     0x80011a0400000000ull
-#define OCTEON_PCI_IOSPACE_SIZE     (1ull<<32)
-
-/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */
-#define OCTEON_PCI_MEMSPACE_OFFSET  (0x00011b0000000000ull)
-
-/**
- * This is the bit decoding used for the Octeon PCI controller addresses
- */
-union octeon_pci_address {
-	uint64_t u64;
-	struct {
-		uint64_t upper:2;
-		uint64_t reserved:13;
-		uint64_t io:1;
-		uint64_t did:5;
-		uint64_t subdid:3;
-		uint64_t reserved2:4;
-		uint64_t endian_swap:2;
-		uint64_t reserved3:10;
-		uint64_t bus:8;
-		uint64_t dev:5;
-		uint64_t func:3;
-		uint64_t reg:8;
-	} s;
-};
-
-/**
- * Return the mapping of PCI device number to IRQ line. Each
- * character in the return string represents the interrupt
- * line for the device at that position. Device 1 maps to the
- * first character, etc. The characters A-D are used for PCI
- * interrupts.
- *
- * Returns PCI interrupt mapping
- */
-const char *octeon_get_pci_interrupts(void)
-{
-	/*
-	 * Returning an empty string causes the interrupts to be
-	 * routed based on the PCI specification. From the PCI spec:
-	 *
-	 * INTA# of Device Number 0 is connected to IRQW on the system
-	 * board.  (Device Number has no significance regarding being
-	 * located on the system board or in a connector.) INTA# of
-	 * Device Number 1 is connected to IRQX on the system
-	 * board. INTA# of Device Number 2 is connected to IRQY on the
-	 * system board. INTA# of Device Number 3 is connected to IRQZ
-	 * on the system board. The table below describes how each
-	 * agent's INTx# lines are connected to the system board
-	 * interrupt lines. The following equation can be used to
-	 * determine to which INTx# signal on the system board a given
-	 * device's INTx# line(s) is connected.
-	 *
-	 * MB = (D + I) MOD 4 MB = System board Interrupt (IRQW = 0,
-	 * IRQX = 1, IRQY = 2, and IRQZ = 3) D = Device Number I =
-	 * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and
-	 * INTD# = 3)
-	 */
-	switch (octeon_bootinfo->board_type) {
-	case CVMX_BOARD_TYPE_NAO38:
-		/* This is really the NAC38 */
-		return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA";
-	case CVMX_BOARD_TYPE_THUNDER:
-		return "";
-	case CVMX_BOARD_TYPE_EBH3000:
-		return "";
-	case CVMX_BOARD_TYPE_EBH3100:
-	case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
-	case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
-		return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
-	case CVMX_BOARD_TYPE_BBGW_REF:
-		return "AABCD";
-	default:
-		return "";
-	}
-}
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @dev:    The Linux PCI device structure for the device to map
- * @slot:   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
- * @pin:    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
- * Returns Interrupt number for the device
- */
-int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev,
-				      u8 slot, u8 pin)
-{
-	int irq_num;
-	const char *interrupts;
-	int dev_num;
-
-	/* Get the board specific interrupt mapping */
-	interrupts = octeon_get_pci_interrupts();
-
-	dev_num = dev->devfn >> 3;
-	if (dev_num < strlen(interrupts))
-		irq_num = ((interrupts[dev_num] - 'A' + pin - 1) & 3) +
-			OCTEON_IRQ_PCI_INT0;
-	else
-		irq_num = ((slot + pin - 3) & 3) + OCTEON_IRQ_PCI_INT0;
-	return irq_num;
-}
-
-
-/**
- * Read a value from configuration space
- *
- */
-static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
-			      int reg, int size, u32 *val)
-{
-	union octeon_pci_address pci_addr;
-
-	pci_addr.u64 = 0;
-	pci_addr.s.upper = 2;
-	pci_addr.s.io = 1;
-	pci_addr.s.did = 3;
-	pci_addr.s.subdid = 1;
-	pci_addr.s.endian_swap = 1;
-	pci_addr.s.bus = bus->number;
-	pci_addr.s.dev = devfn >> 3;
-	pci_addr.s.func = devfn & 0x7;
-	pci_addr.s.reg = reg;
-
-#if PCI_CONFIG_SPACE_DELAY
-	udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
-	switch (size) {
-	case 4:
-		*val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64));
-		return PCIBIOS_SUCCESSFUL;
-	case 2:
-		*val = le16_to_cpu(cvmx_read64_uint16(pci_addr.u64));
-		return PCIBIOS_SUCCESSFUL;
-	case 1:
-		*val = cvmx_read64_uint8(pci_addr.u64);
-		return PCIBIOS_SUCCESSFUL;
-	}
-	return PCIBIOS_FUNC_NOT_SUPPORTED;
-}
-
-
-/**
- * Write a value to PCI configuration space
- *
- * @bus:
- * @devfn:
- * @reg:
- * @size:
- * @val:
- * Returns
- */
-static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
-			       int reg, int size, u32 val)
-{
-	union octeon_pci_address pci_addr;
-
-	pci_addr.u64 = 0;
-	pci_addr.s.upper = 2;
-	pci_addr.s.io = 1;
-	pci_addr.s.did = 3;
-	pci_addr.s.subdid = 1;
-	pci_addr.s.endian_swap = 1;
-	pci_addr.s.bus = bus->number;
-	pci_addr.s.dev = devfn >> 3;
-	pci_addr.s.func = devfn & 0x7;
-	pci_addr.s.reg = reg;
-
-#if PCI_CONFIG_SPACE_DELAY
-	udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
-	switch (size) {
-	case 4:
-		cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val));
-		return PCIBIOS_SUCCESSFUL;
-	case 2:
-		cvmx_write64_uint16(pci_addr.u64, cpu_to_le16(val));
-		return PCIBIOS_SUCCESSFUL;
-	case 1:
-		cvmx_write64_uint8(pci_addr.u64, val);
-		return PCIBIOS_SUCCESSFUL;
-	}
-	return PCIBIOS_FUNC_NOT_SUPPORTED;
-}
-
-
-static struct pci_ops octeon_pci_ops = {
-	octeon_read_config,
-	octeon_write_config,
-};
-
-static struct resource octeon_pci_mem_resource = {
-	.start = 0,
-	.end = 0,
-	.name = "Octeon PCI MEM",
-	.flags = IORESOURCE_MEM,
-};
-
-/*
- * PCI ports must be above 16KB so the ISA bus filtering in the PCI-X to PCI
- * bridge
- */
-static struct resource octeon_pci_io_resource = {
-	.start = 0x4000,
-	.end = OCTEON_PCI_IOSPACE_SIZE - 1,
-	.name = "Octeon PCI IO",
-	.flags = IORESOURCE_IO,
-};
-
-static struct pci_controller octeon_pci_controller = {
-	.pci_ops = &octeon_pci_ops,
-	.mem_resource = &octeon_pci_mem_resource,
-	.mem_offset = OCTEON_PCI_MEMSPACE_OFFSET,
-	.io_resource = &octeon_pci_io_resource,
-	.io_offset = 0,
-	.io_map_base = OCTEON_PCI_IOSPACE_BASE,
-};
-
-
-/**
- * Low level initialize the Octeon PCI controller
- *
- * Returns
- */
-static void octeon_pci_initialize(void)
-{
-	union cvmx_pci_cfg01 cfg01;
-	union cvmx_npi_ctl_status ctl_status;
-	union cvmx_pci_ctl_status_2 ctl_status_2;
-	union cvmx_pci_cfg19 cfg19;
-	union cvmx_pci_cfg16 cfg16;
-	union cvmx_pci_cfg22 cfg22;
-	union cvmx_pci_cfg56 cfg56;
-
-	/* Reset the PCI Bus */
-	cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1);
-	cvmx_read_csr(CVMX_CIU_SOFT_PRST);
-
-	udelay(2000);		/* Hold PCI reset for 2 ms */
-
-	ctl_status.u64 = 0;	/* cvmx_read_csr(CVMX_NPI_CTL_STATUS); */
-	ctl_status.s.max_word = 1;
-	ctl_status.s.timer = 1;
-	cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64);
-
-	/* Deassert PCI reset and advertize PCX Host Mode Device Capability
-	   (64b) */
-	cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
-	cvmx_read_csr(CVMX_CIU_SOFT_PRST);
-
-	udelay(2000);		/* Wait 2 ms after deasserting PCI reset */
-
-	ctl_status_2.u32 = 0;
-	ctl_status_2.s.tsr_hwm = 1;	/* Initializes to 0.  Must be set
-					   before any PCI reads. */
-	ctl_status_2.s.bar2pres = 1;	/* Enable BAR2 */
-	ctl_status_2.s.bar2_enb = 1;
-	ctl_status_2.s.bar2_cax = 1;	/* Don't use L2 */
-	ctl_status_2.s.bar2_esx = 1;
-	ctl_status_2.s.pmo_amod = 1;	/* Round robin priority */
-	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) {
-		/* BAR1 hole */
-		ctl_status_2.s.bb1_hole = OCTEON_PCI_BAR1_HOLE_BITS;
-		ctl_status_2.s.bb1_siz = 1;  /* BAR1 is 2GB */
-		ctl_status_2.s.bb_ca = 1;    /* Don't use L2 with big bars */
-		ctl_status_2.s.bb_es = 1;    /* Big bar in byte swap mode */
-		ctl_status_2.s.bb1 = 1;      /* BAR1 is big */
-		ctl_status_2.s.bb0 = 1;      /* BAR0 is big */
-	}
-
-	octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32);
-	udelay(2000);		/* Wait 2 ms before doing PCI reads */
-
-	ctl_status_2.u32 = octeon_npi_read32(CVMX_NPI_PCI_CTL_STATUS_2);
-	pr_notice("PCI Status: %s %s-bit\n",
-		  ctl_status_2.s.ap_pcix ? "PCI-X" : "PCI",
-		  ctl_status_2.s.ap_64ad ? "64" : "32");
-
-	if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
-		union cvmx_pci_cnt_reg cnt_reg_start;
-		union cvmx_pci_cnt_reg cnt_reg_end;
-		unsigned long cycles, pci_clock;
-
-		cnt_reg_start.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG);
-		cycles = read_c0_cvmcount();
-		udelay(1000);
-		cnt_reg_end.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG);
-		cycles = read_c0_cvmcount() - cycles;
-		pci_clock = (cnt_reg_end.s.pcicnt - cnt_reg_start.s.pcicnt) /
-			    (cycles / (mips_hpt_frequency / 1000000));
-		pr_notice("PCI Clock: %lu MHz\n", pci_clock);
-	}
-
-	/*
-	 * TDOMC must be set to one in PCI mode. TDOMC should be set to 4
-	 * in PCI-X mode to allow four oustanding splits. Otherwise,
-	 * should not change from its reset value. Don't write PCI_CFG19
-	 * in PCI mode (0x82000001 reset value), write it to 0x82000004
-	 * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero.
-	 * MRBCM -> must be one.
-	 */
-	if (ctl_status_2.s.ap_pcix) {
-		cfg19.u32 = 0;
-		/*
-		 * Target Delayed/Split request outstanding maximum
-		 * count. [1..31] and 0=32.  NOTE: If the user
-		 * programs these bits beyond the Designed Maximum
-		 * outstanding count, then the designed maximum table
-		 * depth will be used instead.  No additional
-		 * Deferred/Split transactions will be accepted if
-		 * this outstanding maximum count is
-		 * reached. Furthermore, no additional deferred/split
-		 * transactions will be accepted if the I/O delay/ I/O
-		 * Split Request outstanding maximum is reached.
-		 */
-		cfg19.s.tdomc = 4;
-		/*
-		 * Master Deferred Read Request Outstanding Max Count
-		 * (PCI only).  CR4C[26:24] Max SAC cycles MAX DAC
-		 * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101
-		 * 5 2 110 6 3 111 7 3 For example, if these bits are
-		 * programmed to 100, the core can support 2 DAC
-		 * cycles, 4 SAC cycles or a combination of 1 DAC and
-		 * 2 SAC cycles. NOTE: For the PCI-X maximum
-		 * outstanding split transactions, refer to
-		 * CRE0[22:20].
-		 */
-		cfg19.s.mdrrmc = 2;
-		/*
-		 * Master Request (Memory Read) Byte Count/Byte Enable
-		 * select. 0 = Byte Enables valid. In PCI mode, a
-		 * burst transaction cannot be performed using Memory
-		 * Read command=4?h6. 1 = DWORD Byte Count valid
-		 * (default). In PCI Mode, the memory read byte
-		 * enables are automatically generated by the
-		 * core. Note: N3 Master Request transaction sizes are
-		 * always determined through the
-		 * am_attr[<35:32>|<7:0>] field.
-		 */
-		cfg19.s.mrbcm = 1;
-		octeon_npi_write32(CVMX_NPI_PCI_CFG19, cfg19.u32);
-	}
-
-
-	cfg01.u32 = 0;
-	cfg01.s.msae = 1;	/* Memory Space Access Enable */
-	cfg01.s.me = 1;		/* Master Enable */
-	cfg01.s.pee = 1;	/* PERR# Enable */
-	cfg01.s.see = 1;	/* System Error Enable */
-	cfg01.s.fbbe = 1;	/* Fast Back to Back Transaction Enable */
-
-	octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
-
-#ifdef USE_OCTEON_INTERNAL_ARBITER
-	/*
-	 * When OCTEON is a PCI host, most systems will use OCTEON's
-	 * internal arbiter, so must enable it before any PCI/PCI-X
-	 * traffic can occur.
-	 */
-	{
-		union cvmx_npi_pci_int_arb_cfg pci_int_arb_cfg;
-
-		pci_int_arb_cfg.u64 = 0;
-		pci_int_arb_cfg.s.en = 1;	/* Internal arbiter enable */
-		cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
-	}
-#endif				/* USE_OCTEON_INTERNAL_ARBITER */
-
-	/*
-	 * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
-	 * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to
-	 * 1..7.
-	 */
-	cfg16.u32 = 0;
-	cfg16.s.mltd = 1;	/* Master Latency Timer Disable */
-	octeon_npi_write32(CVMX_NPI_PCI_CFG16, cfg16.u32);
-
-	/*
-	 * Should be written to 0x4ff00. MTTV -> must be zero.
-	 * FLUSH -> must be 1. MRV -> should be 0xFF.
-	 */
-	cfg22.u32 = 0;
-	/* Master Retry Value [1..255] and 0=infinite */
-	cfg22.s.mrv = 0xff;
-	/*
-	 * AM_DO_FLUSH_I control NOTE: This bit MUST BE ONE for proper
-	 * N3K operation.
-	 */
-	cfg22.s.flush = 1;
-	octeon_npi_write32(CVMX_NPI_PCI_CFG22, cfg22.u32);
-
-	/*
-	 * MOST Indicates the maximum number of outstanding splits (in -1
-	 * notation) when OCTEON is in PCI-X mode.  PCI-X performance is
-	 * affected by the MOST selection.  Should generally be written
-	 * with one of 0x3be807, 0x2be807, 0x1be807, or 0x0be807,
-	 * depending on the desired MOST of 3, 2, 1, or 0, respectively.
-	 */
-	cfg56.u32 = 0;
-	cfg56.s.pxcid = 7;	/* RO - PCI-X Capability ID */
-	cfg56.s.ncp = 0xe8;	/* RO - Next Capability Pointer */
-	cfg56.s.dpere = 1;	/* Data Parity Error Recovery Enable */
-	cfg56.s.roe = 1;	/* Relaxed Ordering Enable */
-	cfg56.s.mmbc = 1;	/* Maximum Memory Byte Count
-				   [0=512B,1=1024B,2=2048B,3=4096B] */
-	cfg56.s.most = 3;	/* Maximum outstanding Split transactions [0=1
-				   .. 7=32] */
-
-	octeon_npi_write32(CVMX_NPI_PCI_CFG56, cfg56.u32);
-
-	/*
-	 * Affects PCI performance when OCTEON services reads to its
-	 * BAR1/BAR2. Refer to Section 10.6.1.  The recommended values are
-	 * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and
-	 * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700,
-	 * these values need to be changed so they won't possibly prefetch off
-	 * of the end of memory if PCI is DMAing a buffer at the end of
-	 * memory. Note that these values differ from their reset values.
-	 */
-	octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_6, 0x21);
-	octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_C, 0x31);
-	octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_E, 0x31);
-}
-
-
-/**
- * Initialize the Octeon PCI controller
- *
- * Returns
- */
-static int __init octeon_pci_setup(void)
-{
-	union cvmx_npi_mem_access_subidx mem_access;
-	int index;
-
-	/* Only these chips have PCI */
-	if (octeon_has_feature(OCTEON_FEATURE_PCIE))
-		return 0;
-
-	/* Point pcibios_map_irq() to the PCI version of it */
-	octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq;
-
-	/* Only use the big bars on chips that support it */
-	if (OCTEON_IS_MODEL(OCTEON_CN31XX) ||
-	    OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) ||
-	    OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1))
-		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_SMALL;
-	else
-		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG;
-
-	/* PCI I/O and PCI MEM values */
-	set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
-	ioport_resource.start = 0;
-	ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1;
-	if (!octeon_is_pci_host()) {
-		pr_notice("Not in host mode, PCI Controller not initialized\n");
-		return 0;
-	}
-
-	pr_notice("%s Octeon big bar support\n",
-		  (octeon_dma_bar_type ==
-		  OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling");
-
-	octeon_pci_initialize();
-
-	mem_access.u64 = 0;
-	mem_access.s.esr = 1;	/* Endian-Swap on read. */
-	mem_access.s.esw = 1;	/* Endian-Swap on write. */
-	mem_access.s.nsr = 0;	/* No-Snoop on read. */
-	mem_access.s.nsw = 0;	/* No-Snoop on write. */
-	mem_access.s.ror = 0;	/* Relax Read on read. */
-	mem_access.s.row = 0;	/* Relax Order on write. */
-	mem_access.s.ba = 0;	/* PCI Address bits [63:36]. */
-	cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, mem_access.u64);
-
-	/*
-	 * Remap the Octeon BAR 2 above all 32 bit devices
-	 * (0x8000000000ul).  This is done here so it is remapped
-	 * before the readl()'s below. We don't want BAR2 overlapping
-	 * with BAR0/BAR1 during these reads.
-	 */
-	octeon_npi_write32(CVMX_NPI_PCI_CFG08, 0);
-	octeon_npi_write32(CVMX_NPI_PCI_CFG09, 0x80);
-
-	/* Disable the BAR1 movable mappings */
-	for (index = 0; index < 32; index++)
-		octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0);
-
-	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) {
-		/* Remap the Octeon BAR 0 to 0-2GB */
-		octeon_npi_write32(CVMX_NPI_PCI_CFG04, 0);
-		octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0);
-
-		/*
-		 * Remap the Octeon BAR 1 to map 2GB-4GB (minus the
-		 * BAR 1 hole).
-		 */
-		octeon_npi_write32(CVMX_NPI_PCI_CFG06, 2ul << 30);
-		octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0);
-
-		/* Devices go after BAR1 */
-		octeon_pci_mem_resource.start =
-			OCTEON_PCI_MEMSPACE_OFFSET + (4ul << 30) -
-			(OCTEON_PCI_BAR1_HOLE_SIZE << 20);
-		octeon_pci_mem_resource.end =
-			octeon_pci_mem_resource.start + (1ul << 30);
-	} else {
-		/* Remap the Octeon BAR 0 to map 128MB-(128MB+4KB) */
-		octeon_npi_write32(CVMX_NPI_PCI_CFG04, 128ul << 20);
-		octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0);
-
-		/* Remap the Octeon BAR 1 to map 0-128MB */
-		octeon_npi_write32(CVMX_NPI_PCI_CFG06, 0);
-		octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0);
-
-		/* Devices go after BAR0 */
-		octeon_pci_mem_resource.start =
-			OCTEON_PCI_MEMSPACE_OFFSET + (128ul << 20) +
-			(4ul << 10);
-		octeon_pci_mem_resource.end =
-			octeon_pci_mem_resource.start + (1ul << 30);
-	}
-
-	register_pci_controller(&octeon_pci_controller);
-
-	/*
-	 * Clear any errors that might be pending from before the bus
-	 * was setup properly.
-	 */
-	cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, -1);
-	return 0;
-}
-
-arch_initcall(octeon_pci_setup);
diff --git a/arch/mips/cavium-octeon/pcie.c b/arch/mips/cavium-octeon/pcie.c
deleted file mode 100644
index 49d14081b3b..00000000000
--- a/arch/mips/cavium-octeon/pcie.c
+++ /dev/null
@@ -1,1370 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007, 2008 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-
-#include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-npei-defs.h>
-#include <asm/octeon/cvmx-pciercx-defs.h>
-#include <asm/octeon/cvmx-pescx-defs.h>
-#include <asm/octeon/cvmx-pexp-defs.h>
-#include <asm/octeon/cvmx-helper-errata.h>
-
-#include "pci-common.h"
-
-union cvmx_pcie_address {
-	uint64_t u64;
-	struct {
-		uint64_t upper:2;	/* Normally 2 for XKPHYS */
-		uint64_t reserved_49_61:13;	/* Must be zero */
-		uint64_t io:1;	/* 1 for IO space access */
-		uint64_t did:5;	/* PCIe DID = 3 */
-		uint64_t subdid:3;	/* PCIe SubDID = 1 */
-		uint64_t reserved_36_39:4;	/* Must be zero */
-		uint64_t es:2;	/* Endian swap = 1 */
-		uint64_t port:2;	/* PCIe port 0,1 */
-		uint64_t reserved_29_31:3;	/* Must be zero */
-		/*
-		 * Selects the type of the configuration request (0 = type 0,
-		 * 1 = type 1).
-		 */
-		uint64_t ty:1;
-		/* Target bus number sent in the ID in the request. */
-		uint64_t bus:8;
-		/*
-		 * Target device number sent in the ID in the
-		 * request. Note that Dev must be zero for type 0
-		 * configuration requests.
-		 */
-		uint64_t dev:5;
-		/* Target function number sent in the ID in the request. */
-		uint64_t func:3;
-		/*
-		 * Selects a register in the configuration space of
-		 * the target.
-		 */
-		uint64_t reg:12;
-	} config;
-	struct {
-		uint64_t upper:2;	/* Normally 2 for XKPHYS */
-		uint64_t reserved_49_61:13;	/* Must be zero */
-		uint64_t io:1;	/* 1 for IO space access */
-		uint64_t did:5;	/* PCIe DID = 3 */
-		uint64_t subdid:3;	/* PCIe SubDID = 2 */
-		uint64_t reserved_36_39:4;	/* Must be zero */
-		uint64_t es:2;	/* Endian swap = 1 */
-		uint64_t port:2;	/* PCIe port 0,1 */
-		uint64_t address:32;	/* PCIe IO address */
-	} io;
-	struct {
-		uint64_t upper:2;	/* Normally 2 for XKPHYS */
-		uint64_t reserved_49_61:13;	/* Must be zero */
-		uint64_t io:1;	/* 1 for IO space access */
-		uint64_t did:5;	/* PCIe DID = 3 */
-		uint64_t subdid:3;	/* PCIe SubDID = 3-6 */
-		uint64_t reserved_36_39:4;	/* Must be zero */
-		uint64_t address:36;	/* PCIe Mem address */
-	} mem;
-};
-
-/**
- * Return the Core virtual base address for PCIe IO access. IOs are
- * read/written as an offset from this address.
- *
- * @pcie_port: PCIe port the IO is for
- *
- * Returns 64bit Octeon IO base address for read/write
- */
-static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port)
-{
-	union cvmx_pcie_address pcie_addr;
-	pcie_addr.u64 = 0;
-	pcie_addr.io.upper = 0;
-	pcie_addr.io.io = 1;
-	pcie_addr.io.did = 3;
-	pcie_addr.io.subdid = 2;
-	pcie_addr.io.es = 1;
-	pcie_addr.io.port = pcie_port;
-	return pcie_addr.u64;
-}
-
-/**
- * Size of the IO address region returned at address
- * cvmx_pcie_get_io_base_address()
- *
- * @pcie_port: PCIe port the IO is for
- *
- * Returns Size of the IO window
- */
-static inline uint64_t cvmx_pcie_get_io_size(int pcie_port)
-{
-	return 1ull << 32;
-}
-
-/**
- * Return the Core virtual base address for PCIe MEM access. Memory is
- * read/written as an offset from this address.
- *
- * @pcie_port: PCIe port the IO is for
- *
- * Returns 64bit Octeon IO base address for read/write
- */
-static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port)
-{
-	union cvmx_pcie_address pcie_addr;
-	pcie_addr.u64 = 0;
-	pcie_addr.mem.upper = 0;
-	pcie_addr.mem.io = 1;
-	pcie_addr.mem.did = 3;
-	pcie_addr.mem.subdid = 3 + pcie_port;
-	return pcie_addr.u64;
-}
-
-/**
- * Size of the Mem address region returned at address
- * cvmx_pcie_get_mem_base_address()
- *
- * @pcie_port: PCIe port the IO is for
- *
- * Returns Size of the Mem window
- */
-static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port)
-{
-	return 1ull << 36;
-}
-
-/**
- * Read a PCIe config space register indirectly. This is used for
- * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
- *
- * @pcie_port:  PCIe port to read from
- * @cfg_offset: Address to read
- *
- * Returns Value read
- */
-static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset)
-{
-	union cvmx_pescx_cfg_rd pescx_cfg_rd;
-	pescx_cfg_rd.u64 = 0;
-	pescx_cfg_rd.s.addr = cfg_offset;
-	cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64);
-	pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port));
-	return pescx_cfg_rd.s.data;
-}
-
-/**
- * Write a PCIe config space register indirectly. This is used for
- * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
- *
- * @pcie_port:  PCIe port to write to
- * @cfg_offset: Address to write
- * @val:        Value to write
- */
-static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset,
-				 uint32_t val)
-{
-	union cvmx_pescx_cfg_wr pescx_cfg_wr;
-	pescx_cfg_wr.u64 = 0;
-	pescx_cfg_wr.s.addr = cfg_offset;
-	pescx_cfg_wr.s.data = val;
-	cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64);
-}
-
-/**
- * Build a PCIe config space request address for a device
- *
- * @pcie_port: PCIe port to access
- * @bus:       Sub bus
- * @dev:       Device ID
- * @fn:        Device sub function
- * @reg:       Register to access
- *
- * Returns 64bit Octeon IO address
- */
-static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus,
-						     int dev, int fn, int reg)
-{
-	union cvmx_pcie_address pcie_addr;
-	union cvmx_pciercx_cfg006 pciercx_cfg006;
-
-	pciercx_cfg006.u32 =
-	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port));
-	if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0))
-		return 0;
-
-	pcie_addr.u64 = 0;
-	pcie_addr.config.upper = 2;
-	pcie_addr.config.io = 1;
-	pcie_addr.config.did = 3;
-	pcie_addr.config.subdid = 1;
-	pcie_addr.config.es = 1;
-	pcie_addr.config.port = pcie_port;
-	pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum);
-	pcie_addr.config.bus = bus;
-	pcie_addr.config.dev = dev;
-	pcie_addr.config.func = fn;
-	pcie_addr.config.reg = reg;
-	return pcie_addr.u64;
-}
-
-/**
- * Read 8bits from a Device's config space
- *
- * @pcie_port: PCIe port the device is on
- * @bus:       Sub bus
- * @dev:       Device ID
- * @fn:        Device sub function
- * @reg:       Register to access
- *
- * Returns Result of the read
- */
-static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev,
-				      int fn, int reg)
-{
-	uint64_t address =
-	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
-	if (address)
-		return cvmx_read64_uint8(address);
-	else
-		return 0xff;
-}
-
-/**
- * Read 16bits from a Device's config space
- *
- * @pcie_port: PCIe port the device is on
- * @bus:       Sub bus
- * @dev:       Device ID
- * @fn:        Device sub function
- * @reg:       Register to access
- *
- * Returns Result of the read
- */
-static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev,
-					int fn, int reg)
-{
-	uint64_t address =
-	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
-	if (address)
-		return le16_to_cpu(cvmx_read64_uint16(address));
-	else
-		return 0xffff;
-}
-
-/**
- * Read 32bits from a Device's config space
- *
- * @pcie_port: PCIe port the device is on
- * @bus:       Sub bus
- * @dev:       Device ID
- * @fn:        Device sub function
- * @reg:       Register to access
- *
- * Returns Result of the read
- */
-static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev,
-					int fn, int reg)
-{
-	uint64_t address =
-	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
-	if (address)
-		return le32_to_cpu(cvmx_read64_uint32(address));
-	else
-		return 0xffffffff;
-}
-
-/**
- * Write 8bits to a Device's config space
- *
- * @pcie_port: PCIe port the device is on
- * @bus:       Sub bus
- * @dev:       Device ID
- * @fn:        Device sub function
- * @reg:       Register to access
- * @val:       Value to write
- */
-static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn,
-				    int reg, uint8_t val)
-{
-	uint64_t address =
-	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
-	if (address)
-		cvmx_write64_uint8(address, val);
-}
-
-/**
- * Write 16bits to a Device's config space
- *
- * @pcie_port: PCIe port the device is on
- * @bus:       Sub bus
- * @dev:       Device ID
- * @fn:        Device sub function
- * @reg:       Register to access
- * @val:       Value to write
- */
-static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn,
-				     int reg, uint16_t val)
-{
-	uint64_t address =
-	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
-	if (address)
-		cvmx_write64_uint16(address, cpu_to_le16(val));
-}
-
-/**
- * Write 32bits to a Device's config space
- *
- * @pcie_port: PCIe port the device is on
- * @bus:       Sub bus
- * @dev:       Device ID
- * @fn:        Device sub function
- * @reg:       Register to access
- * @val:       Value to write
- */
-static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn,
-				     int reg, uint32_t val)
-{
-	uint64_t address =
-	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
-	if (address)
-		cvmx_write64_uint32(address, cpu_to_le32(val));
-}
-
-/**
- * Initialize the RC config space CSRs
- *
- * @pcie_port: PCIe port to initialize
- */
-static void __cvmx_pcie_rc_initialize_config_space(int pcie_port)
-{
-	union cvmx_pciercx_cfg030 pciercx_cfg030;
-	union cvmx_npei_ctl_status2 npei_ctl_status2;
-	union cvmx_pciercx_cfg070 pciercx_cfg070;
-	union cvmx_pciercx_cfg001 pciercx_cfg001;
-	union cvmx_pciercx_cfg032 pciercx_cfg032;
-	union cvmx_pciercx_cfg006 pciercx_cfg006;
-	union cvmx_pciercx_cfg008 pciercx_cfg008;
-	union cvmx_pciercx_cfg009 pciercx_cfg009;
-	union cvmx_pciercx_cfg010 pciercx_cfg010;
-	union cvmx_pciercx_cfg011 pciercx_cfg011;
-	union cvmx_pciercx_cfg035 pciercx_cfg035;
-	union cvmx_pciercx_cfg075 pciercx_cfg075;
-	union cvmx_pciercx_cfg034 pciercx_cfg034;
-
-	/* Max Payload Size (PCIE*_CFG030[MPS]) */
-	/* Max Read Request Size (PCIE*_CFG030[MRRS]) */
-	/* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */
-	/* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */
-	pciercx_cfg030.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port));
-	/*
-	 * Max payload size = 128 bytes for best Octeon DMA
-	 * performance.
-	 */
-	pciercx_cfg030.s.mps = 0;
-	/*
-	 * Max read request size = 128 bytes for best Octeon DMA
-	 * performance.
-	 */
-	pciercx_cfg030.s.mrrs = 0;
-	/* Enable relaxed ordering. */
-	pciercx_cfg030.s.ro_en = 1;
-	/* Enable no snoop. */
-	pciercx_cfg030.s.ns_en = 1;
-	/* Correctable error reporting enable. */
-	pciercx_cfg030.s.ce_en = 1;
-	/* Non-fatal error reporting enable. */
-	pciercx_cfg030.s.nfe_en = 1;
-	/* Fatal error reporting enable. */
-	pciercx_cfg030.s.fe_en = 1;
-	/* Unsupported request reporting enable. */
-	pciercx_cfg030.s.ur_en = 1;
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port),
-			     pciercx_cfg030.u32);
-
-	/*
-	 * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match
-	 * PCIE*_CFG030[MPS]
-	 *
-	 * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not
-	 * exceed PCIE*_CFG030[MRRS].
-	 */
-	npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2);
-	/* Max payload size = 128 bytes for best Octeon DMA performance */
-	npei_ctl_status2.s.mps = 0;
-	/* Max read request size = 128 bytes for best Octeon DMA performance */
-	npei_ctl_status2.s.mrrs = 0;
-	cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64);
-
-	/* ECRC Generation (PCIE*_CFG070[GE,CE]) */
-	pciercx_cfg070.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port));
-	pciercx_cfg070.s.ge = 1;	/* ECRC generation enable. */
-	pciercx_cfg070.s.ce = 1;	/* ECRC check enable. */
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port),
-			     pciercx_cfg070.u32);
-
-	/*
-	 * Access Enables (PCIE*_CFG001[MSAE,ME]) ME and MSAE should
-	 * always be set.
-	 *
-	 * Interrupt Disable (PCIE*_CFG001[I_DIS]) System Error
-	 * Message Enable (PCIE*_CFG001[SEE])
-	 */
-	pciercx_cfg001.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port));
-	pciercx_cfg001.s.msae = 1;	/* Memory space enable. */
-	pciercx_cfg001.s.me = 1;	/* Bus master enable. */
-	pciercx_cfg001.s.i_dis = 1;	/* INTx assertion disable. */
-	pciercx_cfg001.s.see = 1;	/* SERR# enable */
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port),
-			pciercx_cfg001.u32);
-
-	/* Advanced Error Recovery Message Enables */
-	/* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0);
-	/* Use CVMX_PCIERCX_CFG067 hardware default */
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0);
-
-	/* Active State Power Management (PCIE*_CFG032[ASLPC]) */
-	pciercx_cfg032.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
-	pciercx_cfg032.s.aslpc = 0;	/* Active state Link PM control. */
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port),
-			     pciercx_cfg032.u32);
-
-	/* Entrance Latencies (PCIE*_CFG451[L0EL,L1EL]) */
-
-	/*
-	 * Link Width Mode (PCIERCn_CFG452[LME]) - Set during
-	 * cvmx_pcie_rc_initialize_link()
-	 *
-	 * Primary Bus Number (PCIERCn_CFG006[PBNUM])
-	 *
-	 * We set the primary bus number to 1 so IDT bridges are
-	 * happy. They don't like zero.
-	 */
-	pciercx_cfg006.u32 = 0;
-	pciercx_cfg006.s.pbnum = 1;
-	pciercx_cfg006.s.sbnum = 1;
-	pciercx_cfg006.s.subbnum = 1;
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port),
-			     pciercx_cfg006.u32);
-
-	/*
-	 * Memory-mapped I/O BAR (PCIERCn_CFG008)
-	 * Most applications should disable the memory-mapped I/O BAR by
-	 * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR]
-	 */
-	pciercx_cfg008.u32 = 0;
-	pciercx_cfg008.s.mb_addr = 0x100;
-	pciercx_cfg008.s.ml_addr = 0;
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port),
-			     pciercx_cfg008.u32);
-
-	/*
-	 * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011)
-	 * Most applications should disable the prefetchable BAR by setting
-	 * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] <
-	 * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE]
-	 */
-	pciercx_cfg009.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port));
-	pciercx_cfg010.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port));
-	pciercx_cfg011.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port));
-	pciercx_cfg009.s.lmem_base = 0x100;
-	pciercx_cfg009.s.lmem_limit = 0;
-	pciercx_cfg010.s.umem_base = 0x100;
-	pciercx_cfg011.s.umem_limit = 0;
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port),
-			     pciercx_cfg009.u32);
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port),
-			     pciercx_cfg010.u32);
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port),
-			     pciercx_cfg011.u32);
-
-	/*
-	 * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE])
-	 * PME Interrupt Enables (PCIERCn_CFG035[PMEIE])
-	 */
-	pciercx_cfg035.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port));
-	/* System error on correctable error enable. */
-	pciercx_cfg035.s.secee = 1;
-	/* System error on fatal error enable. */
-	pciercx_cfg035.s.sefee = 1;
-	/* System error on non-fatal error enable. */
-	pciercx_cfg035.s.senfee = 1;
-	/* PME interrupt enable. */
-	pciercx_cfg035.s.pmeie = 1;
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port),
-			     pciercx_cfg035.u32);
-
-	/*
-	 * Advanced Error Recovery Interrupt Enables
-	 * (PCIERCn_CFG075[CERE,NFERE,FERE])
-	 */
-	pciercx_cfg075.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port));
-	/* Correctable error reporting enable. */
-	pciercx_cfg075.s.cere = 1;
-	/* Non-fatal error reporting enable. */
-	pciercx_cfg075.s.nfere = 1;
-	/* Fatal error reporting enable. */
-	pciercx_cfg075.s.fere = 1;
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port),
-			     pciercx_cfg075.u32);
-
-	/* HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN],
-	 * PCIERCn_CFG034[DLLS_EN,CCINT_EN])
-	 */
-	pciercx_cfg034.u32 =
-		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port));
-	/* Hot-plug interrupt enable. */
-	pciercx_cfg034.s.hpint_en = 1;
-	/* Data Link Layer state changed enable */
-	pciercx_cfg034.s.dlls_en = 1;
-	/* Command completed interrupt enable. */
-	pciercx_cfg034.s.ccint_en = 1;
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port),
-			     pciercx_cfg034.u32);
-}
-
-/**
- * Initialize a host mode PCIe link. This function takes a PCIe
- * port from reset to a link up state. Software can then begin
- * configuring the rest of the link.
- *
- * @pcie_port: PCIe port to initialize
- *
- * Returns Zero on success
- */
-static int __cvmx_pcie_rc_initialize_link(int pcie_port)
-{
-	uint64_t start_cycle;
-	union cvmx_pescx_ctl_status pescx_ctl_status;
-	union cvmx_pciercx_cfg452 pciercx_cfg452;
-	union cvmx_pciercx_cfg032 pciercx_cfg032;
-	union cvmx_pciercx_cfg448 pciercx_cfg448;
-
-	/* Set the lane width */
-	pciercx_cfg452.u32 =
-	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port));
-	pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port));
-	if (pescx_ctl_status.s.qlm_cfg == 0) {
-		/* We're in 8 lane (56XX) or 4 lane (54XX) mode */
-		pciercx_cfg452.s.lme = 0xf;
-	} else {
-		/* We're in 4 lane (56XX) or 2 lane (52XX) mode */
-		pciercx_cfg452.s.lme = 0x7;
-	}
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port),
-			     pciercx_cfg452.u32);
-
-	/*
-	 * CN52XX pass 1.x has an errata where length mismatches on UR
-	 * responses can cause bus errors on 64bit memory
-	 * reads. Turning off length error checking fixes this.
-	 */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
-		union cvmx_pciercx_cfg455 pciercx_cfg455;
-		pciercx_cfg455.u32 =
-		    cvmx_pcie_cfgx_read(pcie_port,
-					CVMX_PCIERCX_CFG455(pcie_port));
-		pciercx_cfg455.s.m_cpl_len_err = 1;
-		cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port),
-				     pciercx_cfg455.u32);
-	}
-
-	/* Lane swap needs to be manually enabled for CN52XX */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) {
-		pescx_ctl_status.s.lane_swp = 1;
-		cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port),
-			       pescx_ctl_status.u64);
-	}
-
-	/* Bring up the link */
-	pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port));
-	pescx_ctl_status.s.lnk_enb = 1;
-	cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64);
-
-	/*
-	 * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to
-	 * be disabled.
-	 */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0))
-		__cvmx_helper_errata_qlm_disable_2nd_order_cdr(0);
-
-	/* Wait for the link to come up */
-	cvmx_dprintf("PCIe: Waiting for port %d link\n", pcie_port);
-	start_cycle = cvmx_get_cycle();
-	do {
-		if (cvmx_get_cycle() - start_cycle >
-		    2 * cvmx_sysinfo_get()->cpu_clock_hz) {
-			cvmx_dprintf("PCIe: Port %d link timeout\n",
-				     pcie_port);
-			return -1;
-		}
-		cvmx_wait(10000);
-		pciercx_cfg032.u32 =
-		    cvmx_pcie_cfgx_read(pcie_port,
-					CVMX_PCIERCX_CFG032(pcie_port));
-	} while (pciercx_cfg032.s.dlla == 0);
-
-	/* Display the link status */
-	cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port,
-		     pciercx_cfg032.s.nlw);
-
-	/*
-	 * Update the Replay Time Limit. Empirically, some PCIe
-	 * devices take a little longer to respond than expected under
-	 * load. As a workaround for this we configure the Replay Time
-	 * Limit to the value expected for a 512 byte MPS instead of
-	 * our actual 256 byte MPS. The numbers below are directly
-	 * from the PCIe spec table 3-4.
-	 */
-	pciercx_cfg448.u32 =
-	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port));
-	switch (pciercx_cfg032.s.nlw) {
-	case 1:		/* 1 lane */
-		pciercx_cfg448.s.rtl = 1677;
-		break;
-	case 2:		/* 2 lanes */
-		pciercx_cfg448.s.rtl = 867;
-		break;
-	case 4:		/* 4 lanes */
-		pciercx_cfg448.s.rtl = 462;
-		break;
-	case 8:		/* 8 lanes */
-		pciercx_cfg448.s.rtl = 258;
-		break;
-	}
-	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port),
-			     pciercx_cfg448.u32);
-
-	return 0;
-}
-
-/**
- * Initialize a PCIe port for use in host(RC) mode. It doesn't
- * enumerate the bus.
- *
- * @pcie_port: PCIe port to initialize
- *
- * Returns Zero on success
- */
-static int cvmx_pcie_rc_initialize(int pcie_port)
-{
-	int i;
-	union cvmx_ciu_soft_prst ciu_soft_prst;
-	union cvmx_pescx_bist_status pescx_bist_status;
-	union cvmx_pescx_bist_status2 pescx_bist_status2;
-	union cvmx_npei_ctl_status npei_ctl_status;
-	union cvmx_npei_mem_access_ctl npei_mem_access_ctl;
-	union cvmx_npei_mem_access_subidx mem_access_subid;
-	union cvmx_npei_dbg_data npei_dbg_data;
-	union cvmx_pescx_ctl_status2 pescx_ctl_status2;
-
-	/*
-	 * Make sure we aren't trying to setup a target mode interface
-	 * in host mode.
-	 */
-	npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS);
-	if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) {
-		cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called "
-			     "on port0, but port0 is not in host mode\n");
-		return -1;
-	}
-
-	/*
-	 * Make sure a CN52XX isn't trying to bring up port 1 when it
-	 * is disabled.
-	 */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX)) {
-		npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
-		if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) {
-			cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() "
-				     "called on port1, but port1 is "
-				     "disabled\n");
-			return -1;
-		}
-	}
-
-	/*
-	 * PCIe switch arbitration mode. '0' == fixed priority NPEI,
-	 * PCIe0, then PCIe1. '1' == round robin.
-	 */
-	npei_ctl_status.s.arb = 1;
-	/* Allow up to 0x20 config retries */
-	npei_ctl_status.s.cfg_rtry = 0x20;
-	/*
-	 * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS
-	 * don't reset.
-	 */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
-		npei_ctl_status.s.p0_ntags = 0x20;
-		npei_ctl_status.s.p1_ntags = 0x20;
-	}
-	cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64);
-
-	/* Bring the PCIe out of reset */
-	if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) {
-		/*
-		 * The EBH5200 board swapped the PCIe reset lines on
-		 * the board. As a workaround for this bug, we bring
-		 * both PCIe ports out of reset at the same time
-		 * instead of on separate calls. So for port 0, we
-		 * bring both out of reset and do nothing on port 1.
-		 */
-		if (pcie_port == 0) {
-			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
-			/*
-			 * After a chip reset the PCIe will also be in
-			 * reset. If it isn't, most likely someone is
-			 * trying to init it again without a proper
-			 * PCIe reset.
-			 */
-			if (ciu_soft_prst.s.soft_prst == 0) {
-				/* Reset the ports */
-				ciu_soft_prst.s.soft_prst = 1;
-				cvmx_write_csr(CVMX_CIU_SOFT_PRST,
-					       ciu_soft_prst.u64);
-				ciu_soft_prst.u64 =
-				    cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
-				ciu_soft_prst.s.soft_prst = 1;
-				cvmx_write_csr(CVMX_CIU_SOFT_PRST1,
-					       ciu_soft_prst.u64);
-				/* Wait until pcie resets the ports. */
-				udelay(2000);
-			}
-			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
-			ciu_soft_prst.s.soft_prst = 0;
-			cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
-			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
-			ciu_soft_prst.s.soft_prst = 0;
-			cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
-		}
-	} else {
-		/*
-		 * The normal case: The PCIe ports are completely
-		 * separate and can be brought out of reset
-		 * independently.
-		 */
-		if (pcie_port)
-			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
-		else
-			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
-		/*
-		 * After a chip reset the PCIe will also be in
-		 * reset. If it isn't, most likely someone is trying
-		 * to init it again without a proper PCIe reset.
-		 */
-		if (ciu_soft_prst.s.soft_prst == 0) {
-			/* Reset the port */
-			ciu_soft_prst.s.soft_prst = 1;
-			if (pcie_port)
-				cvmx_write_csr(CVMX_CIU_SOFT_PRST1,
-					       ciu_soft_prst.u64);
-			else
-				cvmx_write_csr(CVMX_CIU_SOFT_PRST,
-					       ciu_soft_prst.u64);
-			/* Wait until pcie resets the ports. */
-			udelay(2000);
-		}
-		if (pcie_port) {
-			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
-			ciu_soft_prst.s.soft_prst = 0;
-			cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
-		} else {
-			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
-			ciu_soft_prst.s.soft_prst = 0;
-			cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
-		}
-	}
-
-	/*
-	 * Wait for PCIe reset to complete. Due to errata PCIE-700, we
-	 * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a
-	 * fixed number of cycles.
-	 */
-	cvmx_wait(400000);
-
-	/* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of CN56XX and
-	   CN52XX, so we only probe it on newer chips */
-	if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
-	    && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
-		/* Clear PCLK_RUN so we can check if the clock is running */
-		pescx_ctl_status2.u64 =
-		    cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port));
-		pescx_ctl_status2.s.pclk_run = 1;
-		cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port),
-			       pescx_ctl_status2.u64);
-		/*
-		 * Now that we cleared PCLK_RUN, wait for it to be set
-		 * again telling us the clock is running.
-		 */
-		if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port),
-					  union cvmx_pescx_ctl_status2,
-					  pclk_run, ==, 1, 10000)) {
-			cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n",
-				     pcie_port);
-			return -1;
-		}
-	}
-
-	/*
-	 * Check and make sure PCIe came out of reset. If it doesn't
-	 * the board probably hasn't wired the clocks up and the
-	 * interface should be skipped.
-	 */
-	pescx_ctl_status2.u64 =
-	    cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port));
-	if (pescx_ctl_status2.s.pcierst) {
-		cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n",
-			     pcie_port);
-		return -1;
-	}
-
-	/*
-	 * Check BIST2 status. If any bits are set skip this interface. This
-	 * is an attempt to catch PCIE-813 on pass 1 parts.
-	 */
-	pescx_bist_status2.u64 =
-	    cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port));
-	if (pescx_bist_status2.u64) {
-		cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this "
-			     "port isn't hooked up, skipping.\n",
-			     pcie_port);
-		return -1;
-	}
-
-	/* Check BIST status */
-	pescx_bist_status.u64 =
-	    cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port));
-	if (pescx_bist_status.u64)
-		cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n",
-			     pcie_port, CAST64(pescx_bist_status.u64));
-
-	/* Initialize the config space CSRs */
-	__cvmx_pcie_rc_initialize_config_space(pcie_port);
-
-	/* Bring the link up */
-	if (__cvmx_pcie_rc_initialize_link(pcie_port)) {
-		cvmx_dprintf
-		    ("PCIe: ERROR: cvmx_pcie_rc_initialize_link() failed\n");
-		return -1;
-	}
-
-	/* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */
-	npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL);
-	/* Allow 16 words to combine */
-	npei_mem_access_ctl.s.max_word = 0;
-	/* Wait up to 127 cycles for more data */
-	npei_mem_access_ctl.s.timer = 127;
-	cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64);
-
-	/* Setup Mem access SubDIDs */
-	mem_access_subid.u64 = 0;
-	/* Port the request is sent to. */
-	mem_access_subid.s.port = pcie_port;
-	/* Due to an errata on pass 1 chips, no merging is allowed. */
-	mem_access_subid.s.nmerge = 1;
-	/* Endian-swap for Reads. */
-	mem_access_subid.s.esr = 1;
-	/* Endian-swap for Writes. */
-	mem_access_subid.s.esw = 1;
-	/* No Snoop for Reads. */
-	mem_access_subid.s.nsr = 1;
-	/* No Snoop for Writes. */
-	mem_access_subid.s.nsw = 1;
-	/* Disable Relaxed Ordering for Reads. */
-	mem_access_subid.s.ror = 0;
-	/* Disable Relaxed Ordering for Writes. */
-	mem_access_subid.s.row = 0;
-	/* PCIe Adddress Bits <63:34>. */
-	mem_access_subid.s.ba = 0;
-
-	/*
-	 * Setup mem access 12-15 for port 0, 16-19 for port 1,
-	 * supplying 36 bits of address space.
-	 */
-	for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) {
-		cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i),
-			       mem_access_subid.u64);
-		/* Set each SUBID to extend the addressable range */
-		mem_access_subid.s.ba += 1;
-	}
-
-	/*
-	 * Disable the peer to peer forwarding register. This must be
-	 * setup by the OS after it enumerates the bus and assigns
-	 * addresses to the PCIe busses.
-	 */
-	for (i = 0; i < 4; i++) {
-		cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1);
-		cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1);
-	}
-
-	/* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */
-	cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0);
-
-	/*
-	 * Disable Octeon's BAR1. It isn't needed in RC mode since
-	 * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into
-	 * the 2nd 256MB of memory.
-	 */
-	cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1);
-
-	/*
-	 * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take
-	 * precedence where they overlap. It also overlaps with the
-	 * device addresses, so make sure the peer to peer forwarding
-	 * is set right.
-	 */
-	cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0);
-
-	/*
-	 * Setup BAR2 attributes
-	 *
-	 * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM])
-	 * - PTLP_RO,CTLP_RO should normally be set (except for debug).
-	 * - WAIT_COM=0 will likely work for all applications.
-	 *
-	 * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]).
-	 */
-	if (pcie_port) {
-		union cvmx_npei_ctl_port1 npei_ctl_port;
-		npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1);
-		npei_ctl_port.s.bar2_enb = 1;
-		npei_ctl_port.s.bar2_esx = 1;
-		npei_ctl_port.s.bar2_cax = 0;
-		npei_ctl_port.s.ptlp_ro = 1;
-		npei_ctl_port.s.ctlp_ro = 1;
-		npei_ctl_port.s.wait_com = 0;
-		npei_ctl_port.s.waitl_com = 0;
-		cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64);
-	} else {
-		union cvmx_npei_ctl_port0 npei_ctl_port;
-		npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0);
-		npei_ctl_port.s.bar2_enb = 1;
-		npei_ctl_port.s.bar2_esx = 1;
-		npei_ctl_port.s.bar2_cax = 0;
-		npei_ctl_port.s.ptlp_ro = 1;
-		npei_ctl_port.s.ctlp_ro = 1;
-		npei_ctl_port.s.wait_com = 0;
-		npei_ctl_port.s.waitl_com = 0;
-		cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64);
-	}
-	return 0;
-}
-
-
-/* Above was cvmx-pcie.c, below original pcie.c */
-
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev    The Linux PCI device structure for the device to map
- * @param slot   The slot number for this device on __BUS 0__. Linux
- *               enumerates through all the bridges and figures out the
- *               slot on Bus 0 where this device eventually hooks to.
- * @param pin    The PCI interrupt pin read from the device, then swizzled
- *               as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
-				       u8 slot, u8 pin)
-{
-	/*
-	 * The EBH5600 board with the PCI to PCIe bridge mistakenly
-	 * wires the first slot for both device id 2 and interrupt
-	 * A. According to the PCI spec, device id 2 should be C. The
-	 * following kludge attempts to fix this.
-	 */
-	if (strstr(octeon_board_type_string(), "EBH5600") &&
-	    dev->bus && dev->bus->parent) {
-		/*
-		 * Iterate all the way up the device chain and find
-		 * the root bus.
-		 */
-		while (dev->bus && dev->bus->parent)
-			dev = to_pci_dev(dev->bus->bridge);
-		/* If the root bus is number 0 and the PEX 8114 is the
-		 * root, assume we are behind the miswired bus. We
-		 * need to correct the swizzle level by two. Yuck.
-		 */
-		if ((dev->bus->number == 0) &&
-		    (dev->vendor == 0x10b5) && (dev->device == 0x8114)) {
-			/*
-			 * The pin field is one based, not zero. We
-			 * need to swizzle it by minus two.
-			 */
-			pin = ((pin - 3) & 3) + 1;
-		}
-	}
-	/*
-	 * The -1 is because pin starts with one, not zero. It might
-	 * be that this equation needs to include the slot number, but
-	 * I don't have hardware to check that against.
-	 */
-	return pin - 1 + OCTEON_IRQ_PCI_INT0;
-}
-
-/**
- * Read a value from configuration space
- *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
- */
-static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
-					  unsigned int devfn, int reg, int size,
-					  u32 *val)
-{
-	union octeon_cvmemctl cvmmemctl;
-	union octeon_cvmemctl cvmmemctl_save;
-	int bus_number = bus->number;
-
-	/*
-	 * We need to force the bus number to be zero on the root
-	 * bus. Linux numbers the 2nd root bus to start after all
-	 * buses on root 0.
-	 */
-	if (bus->parent == NULL)
-		bus_number = 0;
-
-	/*
-	 * PCIe only has a single device connected to Octeon. It is
-	 * always device ID 0. Don't bother doing reads for other
-	 * device IDs on the first segment.
-	 */
-	if ((bus_number == 0) && (devfn >> 3 != 0))
-		return PCIBIOS_FUNC_NOT_SUPPORTED;
-
-	/*
-	 * The following is a workaround for the CN57XX, CN56XX,
-	 * CN55XX, and CN54XX errata with PCIe config reads from non
-	 * existent devices.  These chips will hang the PCIe link if a
-	 * config read is performed that causes a UR response.
-	 */
-	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) ||
-	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) {
-		/*
-		 * For our EBH5600 board, port 0 has a bridge with two
-		 * PCI-X slots. We need a new special checks to make
-		 * sure we only probe valid stuff.  The PCIe->PCI-X
-		 * bridge only respondes to device ID 0, function
-		 * 0-1
-		 */
-		if ((bus_number == 0) && (devfn >= 2))
-			return PCIBIOS_FUNC_NOT_SUPPORTED;
-		/*
-		 * The PCI-X slots are device ID 2,3. Choose one of
-		 * the below "if" blocks based on what is plugged into
-		 * the board.
-		 */
-#if 1
-		/* Use this option if you aren't using either slot */
-		if (bus_number == 1)
-			return PCIBIOS_FUNC_NOT_SUPPORTED;
-#elif 0
-		/*
-		 * Use this option if you are using the first slot but
-		 * not the second.
-		 */
-		if ((bus_number == 1) && (devfn >> 3 != 2))
-			return PCIBIOS_FUNC_NOT_SUPPORTED;
-#elif 0
-		/*
-		 * Use this option if you are using the second slot
-		 * but not the first.
-		 */
-		if ((bus_number == 1) && (devfn >> 3 != 3))
-			return PCIBIOS_FUNC_NOT_SUPPORTED;
-#elif 0
-		/* Use this opion if you are using both slots */
-		if ((bus_number == 1) &&
-		    !((devfn == (2 << 3)) || (devfn == (3 << 3))))
-			return PCIBIOS_FUNC_NOT_SUPPORTED;
-#endif
-
-		/*
-		 * Shorten the DID timeout so bus errors for PCIe
-		 * config reads from non existent devices happen
-		 * faster. This allows us to continue booting even if
-		 * the above "if" checks are wrong.  Once one of these
-		 * errors happens, the PCIe port is dead.
-		 */
-		cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7);
-		cvmmemctl.u64 = cvmmemctl_save.u64;
-		cvmmemctl.s.didtto = 2;
-		__write_64bit_c0_register($11, 7, cvmmemctl.u64);
-	}
-
-	switch (size) {
-	case 4:
-		*val = cvmx_pcie_config_read32(pcie_port, bus_number,
-					       devfn >> 3, devfn & 0x7, reg);
-		break;
-	case 2:
-		*val = cvmx_pcie_config_read16(pcie_port, bus_number,
-					       devfn >> 3, devfn & 0x7, reg);
-		break;
-	case 1:
-		*val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3,
-					      devfn & 0x7, reg);
-		break;
-	default:
-		return PCIBIOS_FUNC_NOT_SUPPORTED;
-	}
-
-	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) ||
-	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1))
-		__write_64bit_c0_register($11, 7, cvmmemctl_save.u64);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn,
-				    int reg, int size, u32 *val)
-{
-	return octeon_pcie_read_config(0, bus, devfn, reg, size, val);
-}
-
-static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn,
-				    int reg, int size, u32 *val)
-{
-	return octeon_pcie_read_config(1, bus, devfn, reg, size, val);
-}
-
-
-
-/**
- * Write a value to PCI configuration space
- *
- * @param bus
- * @param devfn
- * @param reg
- * @param size
- * @param val
- * @return
- */
-static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
-					   unsigned int devfn, int reg,
-					   int size, u32 val)
-{
-	int bus_number = bus->number;
-	/*
-	 * We need to force the bus number to be zero on the root
-	 * bus. Linux numbers the 2nd root bus to start after all
-	 * busses on root 0.
-	 */
-	if (bus->parent == NULL)
-		bus_number = 0;
-
-	switch (size) {
-	case 4:
-		cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3,
-					 devfn & 0x7, reg, val);
-		return PCIBIOS_SUCCESSFUL;
-	case 2:
-		cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3,
-					 devfn & 0x7, reg, val);
-		return PCIBIOS_SUCCESSFUL;
-	case 1:
-		cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3,
-					devfn & 0x7, reg, val);
-		return PCIBIOS_SUCCESSFUL;
-	}
-#if PCI_CONFIG_SPACE_DELAY
-	udelay(PCI_CONFIG_SPACE_DELAY);
-#endif
-	return PCIBIOS_FUNC_NOT_SUPPORTED;
-}
-
-static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn,
-				     int reg, int size, u32 val)
-{
-	return octeon_pcie_write_config(0, bus, devfn, reg, size, val);
-}
-
-static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn,
-				     int reg, int size, u32 val)
-{
-	return octeon_pcie_write_config(1, bus, devfn, reg, size, val);
-}
-
-static struct pci_ops octeon_pcie0_ops = {
-	octeon_pcie0_read_config,
-	octeon_pcie0_write_config,
-};
-
-static struct resource octeon_pcie0_mem_resource = {
-	.name = "Octeon PCIe0 MEM",
-	.flags = IORESOURCE_MEM,
-};
-
-static struct resource octeon_pcie0_io_resource = {
-	.name = "Octeon PCIe0 IO",
-	.flags = IORESOURCE_IO,
-};
-
-static struct pci_controller octeon_pcie0_controller = {
-	.pci_ops = &octeon_pcie0_ops,
-	.mem_resource = &octeon_pcie0_mem_resource,
-	.io_resource = &octeon_pcie0_io_resource,
-};
-
-static struct pci_ops octeon_pcie1_ops = {
-	octeon_pcie1_read_config,
-	octeon_pcie1_write_config,
-};
-
-static struct resource octeon_pcie1_mem_resource = {
-	.name = "Octeon PCIe1 MEM",
-	.flags = IORESOURCE_MEM,
-};
-
-static struct resource octeon_pcie1_io_resource = {
-	.name = "Octeon PCIe1 IO",
-	.flags = IORESOURCE_IO,
-};
-
-static struct pci_controller octeon_pcie1_controller = {
-	.pci_ops = &octeon_pcie1_ops,
-	.mem_resource = &octeon_pcie1_mem_resource,
-	.io_resource = &octeon_pcie1_io_resource,
-};
-
-
-/**
- * Initialize the Octeon PCIe controllers
- *
- * @return
- */
-static int __init octeon_pcie_setup(void)
-{
-	union cvmx_npei_ctl_status npei_ctl_status;
-	int result;
-
-	/* These chips don't have PCIe */
-	if (!octeon_has_feature(OCTEON_FEATURE_PCIE))
-		return 0;
-
-	/* Point pcibios_map_irq() to the PCIe version of it */
-	octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq;
-
-	/* Use the PCIe based DMA mappings */
-	octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE;
-
-	/*
-	 * PCIe I/O range. It is based on port 0 but includes up until
-	 * port 1's end.
-	 */
-	set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0)));
-	ioport_resource.start = 0;
-	ioport_resource.end =
-		cvmx_pcie_get_io_base_address(1) -
-		cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1;
-
-	npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS);
-	if (npei_ctl_status.s.host_mode) {
-		pr_notice("PCIe: Initializing port 0\n");
-		result = cvmx_pcie_rc_initialize(0);
-		if (result == 0) {
-			/* Memory offsets are physical addresses */
-			octeon_pcie0_controller.mem_offset =
-				cvmx_pcie_get_mem_base_address(0);
-			/* IO offsets are Mips virtual addresses */
-			octeon_pcie0_controller.io_map_base =
-				CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address
-						(0));
-			octeon_pcie0_controller.io_offset = 0;
-			/*
-			 * To keep things similar to PCI, we start
-			 * device addresses at the same place as PCI
-			 * uisng big bar support. This normally
-			 * translates to 4GB-256MB, which is the same
-			 * as most x86 PCs.
-			 */
-			octeon_pcie0_controller.mem_resource->start =
-				cvmx_pcie_get_mem_base_address(0) +
-				(4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20);
-			octeon_pcie0_controller.mem_resource->end =
-				cvmx_pcie_get_mem_base_address(0) +
-				cvmx_pcie_get_mem_size(0) - 1;
-			/*
-			 * Ports must be above 16KB for the ISA bus
-			 * filtering in the PCI-X to PCI bridge.
-			 */
-			octeon_pcie0_controller.io_resource->start = 4 << 10;
-			octeon_pcie0_controller.io_resource->end =
-				cvmx_pcie_get_io_size(0) - 1;
-			register_pci_controller(&octeon_pcie0_controller);
-		}
-	} else {
-		pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n");
-	}
-
-	/* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */
-	if (OCTEON_IS_MODEL(OCTEON_CN52XX)) {
-		union cvmx_npei_dbg_data npei_dbg_data;
-		npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
-		if (npei_dbg_data.cn52xx.qlm0_link_width)
-			return 0;
-	}
-
-	pr_notice("PCIe: Initializing port 1\n");
-	result = cvmx_pcie_rc_initialize(1);
-	if (result == 0) {
-		/* Memory offsets are physical addresses */
-		octeon_pcie1_controller.mem_offset =
-			cvmx_pcie_get_mem_base_address(1);
-		/* IO offsets are Mips virtual addresses */
-		octeon_pcie1_controller.io_map_base =
-			CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(1));
-		octeon_pcie1_controller.io_offset =
-			cvmx_pcie_get_io_base_address(1) -
-			cvmx_pcie_get_io_base_address(0);
-		/*
-		 * To keep things similar to PCI, we start device
-		 * addresses at the same place as PCI uisng big bar
-		 * support. This normally translates to 4GB-256MB,
-		 * which is the same as most x86 PCs.
-		 */
-		octeon_pcie1_controller.mem_resource->start =
-			cvmx_pcie_get_mem_base_address(1) + (4ul << 30) -
-			(OCTEON_PCI_BAR1_HOLE_SIZE << 20);
-		octeon_pcie1_controller.mem_resource->end =
-			cvmx_pcie_get_mem_base_address(1) +
-			cvmx_pcie_get_mem_size(1) - 1;
-		/*
-		 * Ports must be above 16KB for the ISA bus filtering
-		 * in the PCI-X to PCI bridge.
-		 */
-		octeon_pcie1_controller.io_resource->start =
-			cvmx_pcie_get_io_base_address(1) -
-			cvmx_pcie_get_io_base_address(0);
-		octeon_pcie1_controller.io_resource->end =
-			octeon_pcie1_controller.io_resource->start +
-			cvmx_pcie_get_io_size(1) - 1;
-		register_pci_controller(&octeon_pcie1_controller);
-	}
-	return 0;
-}
-
-arch_initcall(octeon_pcie_setup);
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
new file mode 100644
index 00000000000..6ac5d3e3398
--- /dev/null
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2009 Cavium Networks
+ */
+
+#ifndef __PCI_OCTEON_H__
+#define __PCI_OCTEON_H__
+
+#include <linux/pci.h>
+
+/* Some PCI cards require delays when accessing config space. */
+#define PCI_CONFIG_SPACE_DELAY 10000
+
+/*
+ * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
+ * call the Octeon specific version pointed to by this variable. This
+ * function needs to change for PCI or PCIe based hosts.
+ */
+extern int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+				     u8 slot, u8 pin);
+
+/*
+ * The following defines are used when octeon_dma_bar_type =
+ * OCTEON_DMA_BAR_TYPE_BIG
+ */
+#define OCTEON_PCI_BAR1_HOLE_BITS 5
+#define OCTEON_PCI_BAR1_HOLE_SIZE (1ul<<(OCTEON_PCI_BAR1_HOLE_BITS+3))
+
+enum octeon_dma_bar_type {
+	OCTEON_DMA_BAR_TYPE_INVALID,
+	OCTEON_DMA_BAR_TYPE_SMALL,
+	OCTEON_DMA_BAR_TYPE_BIG,
+	OCTEON_DMA_BAR_TYPE_PCIE
+};
+
+/*
+ * This tells the DMA mapping system in dma-octeon.c how to map PCI
+ * DMA addresses.
+ */
+extern enum octeon_dma_bar_type octeon_dma_bar_type;
+
+#endif
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index e8a97f59e06..63d8a297c58 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -52,3 +52,8 @@ obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
 obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= pci-octeon.o pcie-octeon.o
+
+ifdef CONFIG_PCI_MSI
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= msi-octeon.o
+endif
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
new file mode 100644
index 00000000000..03742e64765
--- /dev/null
+++ b/arch/mips/pci/msi-octeon.c
@@ -0,0 +1,288 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2009 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/msi.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-npi-defs.h>
+#include <asm/octeon/cvmx-pci-defs.h>
+#include <asm/octeon/cvmx-npei-defs.h>
+#include <asm/octeon/cvmx-pexp-defs.h>
+#include <asm/octeon/pci-octeon.h>
+
+/*
+ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
+ * in use.
+ */
+static uint64_t msi_free_irq_bitmask;
+
+/*
+ * Each bit in msi_multiple_irq_bitmask tells that the device using
+ * this bit in msi_free_irq_bitmask is also using the next bit. This
+ * is used so we can disable all of the MSI interrupts when a device
+ * uses multiple.
+ */
+static uint64_t msi_multiple_irq_bitmask;
+
+/*
+ * This lock controls updates to msi_free_irq_bitmask and
+ * msi_multiple_irq_bitmask.
+ */
+static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);
+
+
+/**
+ * Called when a driver request MSI interrupts instead of the
+ * legacy INT A-D. This routine will allocate multiple interrupts
+ * for MSI devices that support them. A device can override this by
+ * programming the MSI control bits [6:4] before calling
+ * pci_enable_msi().
+ *
+ * @dev:    Device requesting MSI interrupts
+ * @desc:   MSI descriptor
+ *
+ * Returns 0 on success.
+ */
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+{
+	struct msi_msg msg;
+	uint16_t control;
+	int configured_private_bits;
+	int request_private_bits;
+	int irq;
+	int irq_step;
+	uint64_t search_mask;
+
+	/*
+	 * Read the MSI config to figure out how many IRQs this device
+	 * wants.  Most devices only want 1, which will give
+	 * configured_private_bits and request_private_bits equal 0.
+	 */
+	pci_read_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
+			     &control);
+
+	/*
+	 * If the number of private bits has been configured then use
+	 * that value instead of the requested number. This gives the
+	 * driver the chance to override the number of interrupts
+	 * before calling pci_enable_msi().
+	 */
+	configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4;
+	if (configured_private_bits == 0) {
+		/* Nothing is configured, so use the hardware requested size */
+		request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1;
+	} else {
+		/*
+		 * Use the number of configured bits, assuming the
+		 * driver wanted to override the hardware request
+		 * value.
+		 */
+		request_private_bits = configured_private_bits;
+	}
+
+	/*
+	 * The PCI 2.3 spec mandates that there are at most 32
+	 * interrupts. If this device asks for more, only give it one.
+	 */
+	if (request_private_bits > 5)
+		request_private_bits = 0;
+
+try_only_one:
+	/*
+	 * The IRQs have to be aligned on a power of two based on the
+	 * number being requested.
+	 */
+	irq_step = 1 << request_private_bits;
+
+	/* Mask with one bit for each IRQ */
+	search_mask = (1 << irq_step) - 1;
+
+	/*
+	 * We're going to search msi_free_irq_bitmask_lock for zero
+	 * bits. This represents an MSI interrupt number that isn't in
+	 * use.
+	 */
+	spin_lock(&msi_free_irq_bitmask_lock);
+	for (irq = 0; irq < 64; irq += irq_step) {
+		if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) {
+			msi_free_irq_bitmask |= search_mask << irq;
+			msi_multiple_irq_bitmask |= (search_mask >> 1) << irq;
+			break;
+		}
+	}
+	spin_unlock(&msi_free_irq_bitmask_lock);
+
+	/* Make sure the search for available interrupts didn't fail */
+	if (irq >= 64) {
+		if (request_private_bits) {
+			pr_err("arch_setup_msi_irq: Unable to find %d free "
+			       "interrupts, trying just one",
+			       1 << request_private_bits);
+			request_private_bits = 0;
+			goto try_only_one;
+		} else
+			panic("arch_setup_msi_irq: Unable to find a free MSI "
+			      "interrupt");
+	}
+
+	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
+	irq += OCTEON_IRQ_MSI_BIT0;
+
+	switch (octeon_dma_bar_type) {
+	case OCTEON_DMA_BAR_TYPE_SMALL:
+		/* When not using big bar, Bar 0 is based at 128MB */
+		msg.address_lo =
+			((128ul << 20) + CVMX_PCI_MSI_RCV) & 0xffffffff;
+		msg.address_hi = ((128ul << 20) + CVMX_PCI_MSI_RCV) >> 32;
+	case OCTEON_DMA_BAR_TYPE_BIG:
+		/* When using big bar, Bar 0 is based at 0 */
+		msg.address_lo = (0 + CVMX_PCI_MSI_RCV) & 0xffffffff;
+		msg.address_hi = (0 + CVMX_PCI_MSI_RCV) >> 32;
+		break;
+	case OCTEON_DMA_BAR_TYPE_PCIE:
+		/* When using PCIe, Bar 0 is based at 0 */
+		/* FIXME CVMX_NPEI_MSI_RCV* other than 0? */
+		msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff;
+		msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32;
+		break;
+	default:
+		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type\n");
+	}
+	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
+
+	/* Update the number of IRQs the device has available to it */
+	control &= ~PCI_MSI_FLAGS_QSIZE;
+	control |= request_private_bits << 4;
+	pci_write_config_word(dev, desc->msi_attrib.pos + PCI_MSI_FLAGS,
+			      control);
+
+	set_irq_msi(irq, desc);
+	write_msi_msg(irq, &msg);
+	return 0;
+}
+
+
+/**
+ * Called when a device no longer needs its MSI interrupts. All
+ * MSI interrupts for the device are freed.
+ *
+ * @irq:    The devices first irq number. There may be multple in sequence.
+ */
+void arch_teardown_msi_irq(unsigned int irq)
+{
+	int number_irqs;
+	uint64_t bitmask;
+
+	if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63))
+		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
+		      "MSI interrupt (%d)", irq);
+	irq -= OCTEON_IRQ_MSI_BIT0;
+
+	/*
+	 * Count the number of IRQs we need to free by looking at the
+	 * msi_multiple_irq_bitmask. Each bit set means that the next
+	 * IRQ is also owned by this device.
+	 */
+	number_irqs = 0;
+	while ((irq+number_irqs < 64) &&
+	       (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs))))
+		number_irqs++;
+	number_irqs++;
+	/* Mask with one bit for each IRQ */
+	bitmask = (1 << number_irqs) - 1;
+	/* Shift the mask to the correct bit location */
+	bitmask <<= irq;
+	if ((msi_free_irq_bitmask & bitmask) != bitmask)
+		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
+		      "interrupt (%d) not in use", irq);
+
+	/* Checks are done, update the in use bitmask */
+	spin_lock(&msi_free_irq_bitmask_lock);
+	msi_free_irq_bitmask &= ~bitmask;
+	msi_multiple_irq_bitmask &= ~bitmask;
+	spin_unlock(&msi_free_irq_bitmask_lock);
+}
+
+
+/*
+ * Called by the interrupt handling code when an MSI interrupt
+ * occurs.
+ */
+static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
+{
+	uint64_t msi_bits;
+	int irq;
+
+	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE)
+		msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0);
+	else
+		msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV);
+	irq = fls64(msi_bits);
+	if (irq) {
+		irq += OCTEON_IRQ_MSI_BIT0 - 1;
+		if (irq_desc[irq].action) {
+			do_IRQ(irq);
+			return IRQ_HANDLED;
+		} else {
+			pr_err("Spurious MSI interrupt %d\n", irq);
+			if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
+				/* These chips have PCIe */
+				cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0,
+					       1ull << (irq -
+							OCTEON_IRQ_MSI_BIT0));
+			} else {
+				/* These chips have PCI */
+				cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV,
+					       1ull << (irq -
+							OCTEON_IRQ_MSI_BIT0));
+			}
+		}
+	}
+	return IRQ_NONE;
+}
+
+
+/*
+ * Initializes the MSI interrupt handling code
+ */
+int octeon_msi_initialize(void)
+{
+	if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[0:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+	} else if (octeon_is_pci_host()) {
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[0:15]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[16:31]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[32:47]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
+				IRQF_SHARED,
+				"MSI[48:63]", octeon_msi_interrupt))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
+	}
+	return 0;
+}
+
+subsys_initcall(octeon_msi_initialize);
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
new file mode 100644
index 00000000000..9cb0c807f56
--- /dev/null
+++ b/arch/mips/pci/pci-octeon.c
@@ -0,0 +1,675 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2009 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <asm/time.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-npi-defs.h>
+#include <asm/octeon/cvmx-pci-defs.h>
+#include <asm/octeon/pci-octeon.h>
+
+#define USE_OCTEON_INTERNAL_ARBITER
+
+/*
+ * Octeon's PCI controller uses did=3, subdid=2 for PCI IO
+ * addresses. Use PCI endian swapping 1 so no address swapping is
+ * necessary. The Linux io routines will endian swap the data.
+ */
+#define OCTEON_PCI_IOSPACE_BASE     0x80011a0400000000ull
+#define OCTEON_PCI_IOSPACE_SIZE     (1ull<<32)
+
+/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */
+#define OCTEON_PCI_MEMSPACE_OFFSET  (0x00011b0000000000ull)
+
+/**
+ * This is the bit decoding used for the Octeon PCI controller addresses
+ */
+union octeon_pci_address {
+	uint64_t u64;
+	struct {
+		uint64_t upper:2;
+		uint64_t reserved:13;
+		uint64_t io:1;
+		uint64_t did:5;
+		uint64_t subdid:3;
+		uint64_t reserved2:4;
+		uint64_t endian_swap:2;
+		uint64_t reserved3:10;
+		uint64_t bus:8;
+		uint64_t dev:5;
+		uint64_t func:3;
+		uint64_t reg:8;
+	} s;
+};
+
+int __initdata (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
+					 u8 slot, u8 pin);
+enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
+ *               enumerates through all the bridges and figures out the
+ *               slot on Bus 0 where this device eventually hooks to.
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
+ *               as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (octeon_pcibios_map_irq)
+		return octeon_pcibios_map_irq(dev, slot, pin);
+	else
+		panic("octeon_pcibios_map_irq not set.");
+}
+
+
+/*
+ * Called to perform platform specific PCI setup
+ */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	uint16_t config;
+	uint32_t dconfig;
+	int pos;
+	/*
+	 * Force the Cache line setting to 64 bytes. The standard
+	 * Linux bus scan doesn't seem to set it. Octeon really has
+	 * 128 byte lines, but Intel bridges get really upset if you
+	 * try and set values above 64 bytes. Value is specified in
+	 * 32bit words.
+	 */
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
+	/* Set latency timers for all devices */
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
+
+	/* Enable reporting System errors and parity errors on all devices */
+	/* Enable parity checking and error reporting */
+	pci_read_config_word(dev, PCI_COMMAND, &config);
+	config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	pci_write_config_word(dev, PCI_COMMAND, config);
+
+	if (dev->subordinate) {
+		/* Set latency timers on sub bridges */
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
+		/* More bridge error detection */
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
+		config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
+	}
+
+	/* Enable the PCIe normal error reporting */
+	pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (pos) {
+		/* Update Device Control */
+		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
+		/* Correctable Error Reporting */
+		config |= PCI_EXP_DEVCTL_CERE;
+		/* Non-Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_NFERE;
+		/* Fatal Error Reporting */
+		config |= PCI_EXP_DEVCTL_FERE;
+		/* Unsupported Request */
+		config |= PCI_EXP_DEVCTL_URRE;
+		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
+	}
+
+	/* Find the Advanced Error Reporting capability */
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (pos) {
+		/* Clear Uncorrectable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				      &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
+				       dconfig);
+		/* Enable reporting of all uncorrectable errors */
+		/* Uncorrectable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
+		/*
+		 * Leave severity at HW default. This only controls if
+		 * errors are reported as uncorrectable or
+		 * correctable, not if the error is reported.
+		 */
+		/* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
+		/* Clear Correctable Error Status */
+		pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
+		/* Enable reporting of all correctable errors */
+		/* Correctable Error Mask - turned on bits disable errors */
+		pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
+		/* Advanced Error Capabilities */
+		pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
+		/* ECRC Generation Enable */
+		if (config & PCI_ERR_CAP_ECRC_GENC)
+			config |= PCI_ERR_CAP_ECRC_GENE;
+		/* ECRC Check Enable */
+		if (config & PCI_ERR_CAP_ECRC_CHKC)
+			config |= PCI_ERR_CAP_ECRC_CHKE;
+		pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
+		/* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
+		/* Report all errors to the root complex */
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
+				       PCI_ERR_ROOT_CMD_COR_EN |
+				       PCI_ERR_ROOT_CMD_NONFATAL_EN |
+				       PCI_ERR_ROOT_CMD_FATAL_EN);
+		/* Clear the Root status register */
+		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
+		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
+	}
+
+	return 0;
+}
+
+/**
+ * Return the mapping of PCI device number to IRQ line. Each
+ * character in the return string represents the interrupt
+ * line for the device at that position. Device 1 maps to the
+ * first character, etc. The characters A-D are used for PCI
+ * interrupts.
+ *
+ * Returns PCI interrupt mapping
+ */
+const char *octeon_get_pci_interrupts(void)
+{
+	/*
+	 * Returning an empty string causes the interrupts to be
+	 * routed based on the PCI specification. From the PCI spec:
+	 *
+	 * INTA# of Device Number 0 is connected to IRQW on the system
+	 * board.  (Device Number has no significance regarding being
+	 * located on the system board or in a connector.) INTA# of
+	 * Device Number 1 is connected to IRQX on the system
+	 * board. INTA# of Device Number 2 is connected to IRQY on the
+	 * system board. INTA# of Device Number 3 is connected to IRQZ
+	 * on the system board. The table below describes how each
+	 * agent's INTx# lines are connected to the system board
+	 * interrupt lines. The following equation can be used to
+	 * determine to which INTx# signal on the system board a given
+	 * device's INTx# line(s) is connected.
+	 *
+	 * MB = (D + I) MOD 4 MB = System board Interrupt (IRQW = 0,
+	 * IRQX = 1, IRQY = 2, and IRQZ = 3) D = Device Number I =
+	 * Interrupt Number (INTA# = 0, INTB# = 1, INTC# = 2, and
+	 * INTD# = 3)
+	 */
+	switch (octeon_bootinfo->board_type) {
+	case CVMX_BOARD_TYPE_NAO38:
+		/* This is really the NAC38 */
+		return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA";
+	case CVMX_BOARD_TYPE_THUNDER:
+		return "";
+	case CVMX_BOARD_TYPE_EBH3000:
+		return "";
+	case CVMX_BOARD_TYPE_EBH3100:
+	case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
+	case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
+		return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA";
+	case CVMX_BOARD_TYPE_BBGW_REF:
+		return "AABCD";
+	default:
+		return "";
+	}
+}
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
+ *               enumerates through all the bridges and figures out the
+ *               slot on Bus 0 where this device eventually hooks to.
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
+ *               as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev,
+				      u8 slot, u8 pin)
+{
+	int irq_num;
+	const char *interrupts;
+	int dev_num;
+
+	/* Get the board specific interrupt mapping */
+	interrupts = octeon_get_pci_interrupts();
+
+	dev_num = dev->devfn >> 3;
+	if (dev_num < strlen(interrupts))
+		irq_num = ((interrupts[dev_num] - 'A' + pin - 1) & 3) +
+			OCTEON_IRQ_PCI_INT0;
+	else
+		irq_num = ((slot + pin - 3) & 3) + OCTEON_IRQ_PCI_INT0;
+	return irq_num;
+}
+
+
+/*
+ * Read a value from configuration space
+ */
+static int octeon_read_config(struct pci_bus *bus, unsigned int devfn,
+			      int reg, int size, u32 *val)
+{
+	union octeon_pci_address pci_addr;
+
+	pci_addr.u64 = 0;
+	pci_addr.s.upper = 2;
+	pci_addr.s.io = 1;
+	pci_addr.s.did = 3;
+	pci_addr.s.subdid = 1;
+	pci_addr.s.endian_swap = 1;
+	pci_addr.s.bus = bus->number;
+	pci_addr.s.dev = devfn >> 3;
+	pci_addr.s.func = devfn & 0x7;
+	pci_addr.s.reg = reg;
+
+#if PCI_CONFIG_SPACE_DELAY
+	udelay(PCI_CONFIG_SPACE_DELAY);
+#endif
+	switch (size) {
+	case 4:
+		*val = le32_to_cpu(cvmx_read64_uint32(pci_addr.u64));
+		return PCIBIOS_SUCCESSFUL;
+	case 2:
+		*val = le16_to_cpu(cvmx_read64_uint16(pci_addr.u64));
+		return PCIBIOS_SUCCESSFUL;
+	case 1:
+		*val = cvmx_read64_uint8(pci_addr.u64);
+		return PCIBIOS_SUCCESSFUL;
+	}
+	return PCIBIOS_FUNC_NOT_SUPPORTED;
+}
+
+
+/*
+ * Write a value to PCI configuration space
+ */
+static int octeon_write_config(struct pci_bus *bus, unsigned int devfn,
+			       int reg, int size, u32 val)
+{
+	union octeon_pci_address pci_addr;
+
+	pci_addr.u64 = 0;
+	pci_addr.s.upper = 2;
+	pci_addr.s.io = 1;
+	pci_addr.s.did = 3;
+	pci_addr.s.subdid = 1;
+	pci_addr.s.endian_swap = 1;
+	pci_addr.s.bus = bus->number;
+	pci_addr.s.dev = devfn >> 3;
+	pci_addr.s.func = devfn & 0x7;
+	pci_addr.s.reg = reg;
+
+#if PCI_CONFIG_SPACE_DELAY
+	udelay(PCI_CONFIG_SPACE_DELAY);
+#endif
+	switch (size) {
+	case 4:
+		cvmx_write64_uint32(pci_addr.u64, cpu_to_le32(val));
+		return PCIBIOS_SUCCESSFUL;
+	case 2:
+		cvmx_write64_uint16(pci_addr.u64, cpu_to_le16(val));
+		return PCIBIOS_SUCCESSFUL;
+	case 1:
+		cvmx_write64_uint8(pci_addr.u64, val);
+		return PCIBIOS_SUCCESSFUL;
+	}
+	return PCIBIOS_FUNC_NOT_SUPPORTED;
+}
+
+
+static struct pci_ops octeon_pci_ops = {
+	octeon_read_config,
+	octeon_write_config,
+};
+
+static struct resource octeon_pci_mem_resource = {
+	.start = 0,
+	.end = 0,
+	.name = "Octeon PCI MEM",
+	.flags = IORESOURCE_MEM,
+};
+
+/*
+ * PCI ports must be above 16KB so the ISA bus filtering in the PCI-X to PCI
+ * bridge
+ */
+static struct resource octeon_pci_io_resource = {
+	.start = 0x4000,
+	.end = OCTEON_PCI_IOSPACE_SIZE - 1,
+	.name = "Octeon PCI IO",
+	.flags = IORESOURCE_IO,
+};
+
+static struct pci_controller octeon_pci_controller = {
+	.pci_ops = &octeon_pci_ops,
+	.mem_resource = &octeon_pci_mem_resource,
+	.mem_offset = OCTEON_PCI_MEMSPACE_OFFSET,
+	.io_resource = &octeon_pci_io_resource,
+	.io_offset = 0,
+	.io_map_base = OCTEON_PCI_IOSPACE_BASE,
+};
+
+
+/*
+ * Low level initialize the Octeon PCI controller
+ */
+static void octeon_pci_initialize(void)
+{
+	union cvmx_pci_cfg01 cfg01;
+	union cvmx_npi_ctl_status ctl_status;
+	union cvmx_pci_ctl_status_2 ctl_status_2;
+	union cvmx_pci_cfg19 cfg19;
+	union cvmx_pci_cfg16 cfg16;
+	union cvmx_pci_cfg22 cfg22;
+	union cvmx_pci_cfg56 cfg56;
+
+	/* Reset the PCI Bus */
+	cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1);
+	cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+
+	udelay(2000);		/* Hold PCI reset for 2 ms */
+
+	ctl_status.u64 = 0;	/* cvmx_read_csr(CVMX_NPI_CTL_STATUS); */
+	ctl_status.s.max_word = 1;
+	ctl_status.s.timer = 1;
+	cvmx_write_csr(CVMX_NPI_CTL_STATUS, ctl_status.u64);
+
+	/* Deassert PCI reset and advertize PCX Host Mode Device Capability
+	   (64b) */
+	cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
+	cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+
+	udelay(2000);		/* Wait 2 ms after deasserting PCI reset */
+
+	ctl_status_2.u32 = 0;
+	ctl_status_2.s.tsr_hwm = 1;	/* Initializes to 0.  Must be set
+					   before any PCI reads. */
+	ctl_status_2.s.bar2pres = 1;	/* Enable BAR2 */
+	ctl_status_2.s.bar2_enb = 1;
+	ctl_status_2.s.bar2_cax = 1;	/* Don't use L2 */
+	ctl_status_2.s.bar2_esx = 1;
+	ctl_status_2.s.pmo_amod = 1;	/* Round robin priority */
+	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) {
+		/* BAR1 hole */
+		ctl_status_2.s.bb1_hole = OCTEON_PCI_BAR1_HOLE_BITS;
+		ctl_status_2.s.bb1_siz = 1;  /* BAR1 is 2GB */
+		ctl_status_2.s.bb_ca = 1;    /* Don't use L2 with big bars */
+		ctl_status_2.s.bb_es = 1;    /* Big bar in byte swap mode */
+		ctl_status_2.s.bb1 = 1;      /* BAR1 is big */
+		ctl_status_2.s.bb0 = 1;      /* BAR0 is big */
+	}
+
+	octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32);
+	udelay(2000);		/* Wait 2 ms before doing PCI reads */
+
+	ctl_status_2.u32 = octeon_npi_read32(CVMX_NPI_PCI_CTL_STATUS_2);
+	pr_notice("PCI Status: %s %s-bit\n",
+		  ctl_status_2.s.ap_pcix ? "PCI-X" : "PCI",
+		  ctl_status_2.s.ap_64ad ? "64" : "32");
+
+	if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+		union cvmx_pci_cnt_reg cnt_reg_start;
+		union cvmx_pci_cnt_reg cnt_reg_end;
+		unsigned long cycles, pci_clock;
+
+		cnt_reg_start.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG);
+		cycles = read_c0_cvmcount();
+		udelay(1000);
+		cnt_reg_end.u64 = cvmx_read_csr(CVMX_NPI_PCI_CNT_REG);
+		cycles = read_c0_cvmcount() - cycles;
+		pci_clock = (cnt_reg_end.s.pcicnt - cnt_reg_start.s.pcicnt) /
+			    (cycles / (mips_hpt_frequency / 1000000));
+		pr_notice("PCI Clock: %lu MHz\n", pci_clock);
+	}
+
+	/*
+	 * TDOMC must be set to one in PCI mode. TDOMC should be set to 4
+	 * in PCI-X mode to allow four oustanding splits. Otherwise,
+	 * should not change from its reset value. Don't write PCI_CFG19
+	 * in PCI mode (0x82000001 reset value), write it to 0x82000004
+	 * after PCI-X mode is known. MRBCI,MDWE,MDRE -> must be zero.
+	 * MRBCM -> must be one.
+	 */
+	if (ctl_status_2.s.ap_pcix) {
+		cfg19.u32 = 0;
+		/*
+		 * Target Delayed/Split request outstanding maximum
+		 * count. [1..31] and 0=32.  NOTE: If the user
+		 * programs these bits beyond the Designed Maximum
+		 * outstanding count, then the designed maximum table
+		 * depth will be used instead.  No additional
+		 * Deferred/Split transactions will be accepted if
+		 * this outstanding maximum count is
+		 * reached. Furthermore, no additional deferred/split
+		 * transactions will be accepted if the I/O delay/ I/O
+		 * Split Request outstanding maximum is reached.
+		 */
+		cfg19.s.tdomc = 4;
+		/*
+		 * Master Deferred Read Request Outstanding Max Count
+		 * (PCI only).  CR4C[26:24] Max SAC cycles MAX DAC
+		 * cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101
+		 * 5 2 110 6 3 111 7 3 For example, if these bits are
+		 * programmed to 100, the core can support 2 DAC
+		 * cycles, 4 SAC cycles or a combination of 1 DAC and
+		 * 2 SAC cycles. NOTE: For the PCI-X maximum
+		 * outstanding split transactions, refer to
+		 * CRE0[22:20].
+		 */
+		cfg19.s.mdrrmc = 2;
+		/*
+		 * Master Request (Memory Read) Byte Count/Byte Enable
+		 * select. 0 = Byte Enables valid. In PCI mode, a
+		 * burst transaction cannot be performed using Memory
+		 * Read command=4?h6. 1 = DWORD Byte Count valid
+		 * (default). In PCI Mode, the memory read byte
+		 * enables are automatically generated by the
+		 * core. Note: N3 Master Request transaction sizes are
+		 * always determined through the
+		 * am_attr[<35:32>|<7:0>] field.
+		 */
+		cfg19.s.mrbcm = 1;
+		octeon_npi_write32(CVMX_NPI_PCI_CFG19, cfg19.u32);
+	}
+
+
+	cfg01.u32 = 0;
+	cfg01.s.msae = 1;	/* Memory Space Access Enable */
+	cfg01.s.me = 1;		/* Master Enable */
+	cfg01.s.pee = 1;	/* PERR# Enable */
+	cfg01.s.see = 1;	/* System Error Enable */
+	cfg01.s.fbbe = 1;	/* Fast Back to Back Transaction Enable */
+
+	octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+
+#ifdef USE_OCTEON_INTERNAL_ARBITER
+	/*
+	 * When OCTEON is a PCI host, most systems will use OCTEON's
+	 * internal arbiter, so must enable it before any PCI/PCI-X
+	 * traffic can occur.
+	 */
+	{
+		union cvmx_npi_pci_int_arb_cfg pci_int_arb_cfg;
+
+		pci_int_arb_cfg.u64 = 0;
+		pci_int_arb_cfg.s.en = 1;	/* Internal arbiter enable */
+		cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, pci_int_arb_cfg.u64);
+	}
+#endif	/* USE_OCTEON_INTERNAL_ARBITER */
+
+	/*
+	 * Preferrably written to 1 to set MLTD. [RDSATI,TRTAE,
+	 * TWTAE,TMAE,DPPMR -> must be zero. TILT -> must not be set to
+	 * 1..7.
+	 */
+	cfg16.u32 = 0;
+	cfg16.s.mltd = 1;	/* Master Latency Timer Disable */
+	octeon_npi_write32(CVMX_NPI_PCI_CFG16, cfg16.u32);
+
+	/*
+	 * Should be written to 0x4ff00. MTTV -> must be zero.
+	 * FLUSH -> must be 1. MRV -> should be 0xFF.
+	 */
+	cfg22.u32 = 0;
+	/* Master Retry Value [1..255] and 0=infinite */
+	cfg22.s.mrv = 0xff;
+	/*
+	 * AM_DO_FLUSH_I control NOTE: This bit MUST BE ONE for proper
+	 * N3K operation.
+	 */
+	cfg22.s.flush = 1;
+	octeon_npi_write32(CVMX_NPI_PCI_CFG22, cfg22.u32);
+
+	/*
+	 * MOST Indicates the maximum number of outstanding splits (in -1
+	 * notation) when OCTEON is in PCI-X mode.  PCI-X performance is
+	 * affected by the MOST selection.  Should generally be written
+	 * with one of 0x3be807, 0x2be807, 0x1be807, or 0x0be807,
+	 * depending on the desired MOST of 3, 2, 1, or 0, respectively.
+	 */
+	cfg56.u32 = 0;
+	cfg56.s.pxcid = 7;	/* RO - PCI-X Capability ID */
+	cfg56.s.ncp = 0xe8;	/* RO - Next Capability Pointer */
+	cfg56.s.dpere = 1;	/* Data Parity Error Recovery Enable */
+	cfg56.s.roe = 1;	/* Relaxed Ordering Enable */
+	cfg56.s.mmbc = 1;	/* Maximum Memory Byte Count
+				   [0=512B,1=1024B,2=2048B,3=4096B] */
+	cfg56.s.most = 3;	/* Maximum outstanding Split transactions [0=1
+				   .. 7=32] */
+
+	octeon_npi_write32(CVMX_NPI_PCI_CFG56, cfg56.u32);
+
+	/*
+	 * Affects PCI performance when OCTEON services reads to its
+	 * BAR1/BAR2. Refer to Section 10.6.1.  The recommended values are
+	 * 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and
+	 * PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700,
+	 * these values need to be changed so they won't possibly prefetch off
+	 * of the end of memory if PCI is DMAing a buffer at the end of
+	 * memory. Note that these values differ from their reset values.
+	 */
+	octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_6, 0x21);
+	octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_C, 0x31);
+	octeon_npi_write32(CVMX_NPI_PCI_READ_CMD_E, 0x31);
+}
+
+
+/*
+ * Initialize the Octeon PCI controller
+ */
+static int __init octeon_pci_setup(void)
+{
+	union cvmx_npi_mem_access_subidx mem_access;
+	int index;
+
+	/* Only these chips have PCI */
+	if (octeon_has_feature(OCTEON_FEATURE_PCIE))
+		return 0;
+
+	/* Point pcibios_map_irq() to the PCI version of it */
+	octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq;
+
+	/* Only use the big bars on chips that support it */
+	if (OCTEON_IS_MODEL(OCTEON_CN31XX) ||
+	    OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) ||
+	    OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1))
+		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_SMALL;
+	else
+		octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG;
+
+	/* PCI I/O and PCI MEM values */
+	set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
+	ioport_resource.start = 0;
+	ioport_resource.end = OCTEON_PCI_IOSPACE_SIZE - 1;
+	if (!octeon_is_pci_host()) {
+		pr_notice("Not in host mode, PCI Controller not initialized\n");
+		return 0;
+	}
+
+	pr_notice("%s Octeon big bar support\n",
+		  (octeon_dma_bar_type ==
+		  OCTEON_DMA_BAR_TYPE_BIG) ? "Enabling" : "Disabling");
+
+	octeon_pci_initialize();
+
+	mem_access.u64 = 0;
+	mem_access.s.esr = 1;	/* Endian-Swap on read. */
+	mem_access.s.esw = 1;	/* Endian-Swap on write. */
+	mem_access.s.nsr = 0;	/* No-Snoop on read. */
+	mem_access.s.nsw = 0;	/* No-Snoop on write. */
+	mem_access.s.ror = 0;	/* Relax Read on read. */
+	mem_access.s.row = 0;	/* Relax Order on write. */
+	mem_access.s.ba = 0;	/* PCI Address bits [63:36]. */
+	cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, mem_access.u64);
+
+	/*
+	 * Remap the Octeon BAR 2 above all 32 bit devices
+	 * (0x8000000000ul).  This is done here so it is remapped
+	 * before the readl()'s below. We don't want BAR2 overlapping
+	 * with BAR0/BAR1 during these reads.
+	 */
+	octeon_npi_write32(CVMX_NPI_PCI_CFG08, 0);
+	octeon_npi_write32(CVMX_NPI_PCI_CFG09, 0x80);
+
+	/* Disable the BAR1 movable mappings */
+	for (index = 0; index < 32; index++)
+		octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0);
+
+	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_BIG) {
+		/* Remap the Octeon BAR 0 to 0-2GB */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG04, 0);
+		octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0);
+
+		/*
+		 * Remap the Octeon BAR 1 to map 2GB-4GB (minus the
+		 * BAR 1 hole).
+		 */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG06, 2ul << 30);
+		octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0);
+
+		/* Devices go after BAR1 */
+		octeon_pci_mem_resource.start =
+			OCTEON_PCI_MEMSPACE_OFFSET + (4ul << 30) -
+			(OCTEON_PCI_BAR1_HOLE_SIZE << 20);
+		octeon_pci_mem_resource.end =
+			octeon_pci_mem_resource.start + (1ul << 30);
+	} else {
+		/* Remap the Octeon BAR 0 to map 128MB-(128MB+4KB) */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG04, 128ul << 20);
+		octeon_npi_write32(CVMX_NPI_PCI_CFG05, 0);
+
+		/* Remap the Octeon BAR 1 to map 0-128MB */
+		octeon_npi_write32(CVMX_NPI_PCI_CFG06, 0);
+		octeon_npi_write32(CVMX_NPI_PCI_CFG07, 0);
+
+		/* Devices go after BAR0 */
+		octeon_pci_mem_resource.start =
+			OCTEON_PCI_MEMSPACE_OFFSET + (128ul << 20) +
+			(4ul << 10);
+		octeon_pci_mem_resource.end =
+			octeon_pci_mem_resource.start + (1ul << 30);
+	}
+
+	register_pci_controller(&octeon_pci_controller);
+
+	/*
+	 * Clear any errors that might be pending from before the bus
+	 * was setup properly.
+	 */
+	cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, -1);
+	return 0;
+}
+
+arch_initcall(octeon_pci_setup);
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
new file mode 100644
index 00000000000..75262247f3e
--- /dev/null
+++ b/arch/mips/pci/pcie-octeon.c
@@ -0,0 +1,1369 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007, 2008 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-npei-defs.h>
+#include <asm/octeon/cvmx-pciercx-defs.h>
+#include <asm/octeon/cvmx-pescx-defs.h>
+#include <asm/octeon/cvmx-pexp-defs.h>
+#include <asm/octeon/cvmx-helper-errata.h>
+#include <asm/octeon/pci-octeon.h>
+
+union cvmx_pcie_address {
+	uint64_t u64;
+	struct {
+		uint64_t upper:2;	/* Normally 2 for XKPHYS */
+		uint64_t reserved_49_61:13;	/* Must be zero */
+		uint64_t io:1;	/* 1 for IO space access */
+		uint64_t did:5;	/* PCIe DID = 3 */
+		uint64_t subdid:3;	/* PCIe SubDID = 1 */
+		uint64_t reserved_36_39:4;	/* Must be zero */
+		uint64_t es:2;	/* Endian swap = 1 */
+		uint64_t port:2;	/* PCIe port 0,1 */
+		uint64_t reserved_29_31:3;	/* Must be zero */
+		/*
+		 * Selects the type of the configuration request (0 = type 0,
+		 * 1 = type 1).
+		 */
+		uint64_t ty:1;
+		/* Target bus number sent in the ID in the request. */
+		uint64_t bus:8;
+		/*
+		 * Target device number sent in the ID in the
+		 * request. Note that Dev must be zero for type 0
+		 * configuration requests.
+		 */
+		uint64_t dev:5;
+		/* Target function number sent in the ID in the request. */
+		uint64_t func:3;
+		/*
+		 * Selects a register in the configuration space of
+		 * the target.
+		 */
+		uint64_t reg:12;
+	} config;
+	struct {
+		uint64_t upper:2;	/* Normally 2 for XKPHYS */
+		uint64_t reserved_49_61:13;	/* Must be zero */
+		uint64_t io:1;	/* 1 for IO space access */
+		uint64_t did:5;	/* PCIe DID = 3 */
+		uint64_t subdid:3;	/* PCIe SubDID = 2 */
+		uint64_t reserved_36_39:4;	/* Must be zero */
+		uint64_t es:2;	/* Endian swap = 1 */
+		uint64_t port:2;	/* PCIe port 0,1 */
+		uint64_t address:32;	/* PCIe IO address */
+	} io;
+	struct {
+		uint64_t upper:2;	/* Normally 2 for XKPHYS */
+		uint64_t reserved_49_61:13;	/* Must be zero */
+		uint64_t io:1;	/* 1 for IO space access */
+		uint64_t did:5;	/* PCIe DID = 3 */
+		uint64_t subdid:3;	/* PCIe SubDID = 3-6 */
+		uint64_t reserved_36_39:4;	/* Must be zero */
+		uint64_t address:36;	/* PCIe Mem address */
+	} mem;
+};
+
+/**
+ * Return the Core virtual base address for PCIe IO access. IOs are
+ * read/written as an offset from this address.
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns 64bit Octeon IO base address for read/write
+ */
+static inline uint64_t cvmx_pcie_get_io_base_address(int pcie_port)
+{
+	union cvmx_pcie_address pcie_addr;
+	pcie_addr.u64 = 0;
+	pcie_addr.io.upper = 0;
+	pcie_addr.io.io = 1;
+	pcie_addr.io.did = 3;
+	pcie_addr.io.subdid = 2;
+	pcie_addr.io.es = 1;
+	pcie_addr.io.port = pcie_port;
+	return pcie_addr.u64;
+}
+
+/**
+ * Size of the IO address region returned at address
+ * cvmx_pcie_get_io_base_address()
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns Size of the IO window
+ */
+static inline uint64_t cvmx_pcie_get_io_size(int pcie_port)
+{
+	return 1ull << 32;
+}
+
+/**
+ * Return the Core virtual base address for PCIe MEM access. Memory is
+ * read/written as an offset from this address.
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns 64bit Octeon IO base address for read/write
+ */
+static inline uint64_t cvmx_pcie_get_mem_base_address(int pcie_port)
+{
+	union cvmx_pcie_address pcie_addr;
+	pcie_addr.u64 = 0;
+	pcie_addr.mem.upper = 0;
+	pcie_addr.mem.io = 1;
+	pcie_addr.mem.did = 3;
+	pcie_addr.mem.subdid = 3 + pcie_port;
+	return pcie_addr.u64;
+}
+
+/**
+ * Size of the Mem address region returned at address
+ * cvmx_pcie_get_mem_base_address()
+ *
+ * @pcie_port: PCIe port the IO is for
+ *
+ * Returns Size of the Mem window
+ */
+static inline uint64_t cvmx_pcie_get_mem_size(int pcie_port)
+{
+	return 1ull << 36;
+}
+
+/**
+ * Read a PCIe config space register indirectly. This is used for
+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
+ *
+ * @pcie_port:  PCIe port to read from
+ * @cfg_offset: Address to read
+ *
+ * Returns Value read
+ */
+static uint32_t cvmx_pcie_cfgx_read(int pcie_port, uint32_t cfg_offset)
+{
+	union cvmx_pescx_cfg_rd pescx_cfg_rd;
+	pescx_cfg_rd.u64 = 0;
+	pescx_cfg_rd.s.addr = cfg_offset;
+	cvmx_write_csr(CVMX_PESCX_CFG_RD(pcie_port), pescx_cfg_rd.u64);
+	pescx_cfg_rd.u64 = cvmx_read_csr(CVMX_PESCX_CFG_RD(pcie_port));
+	return pescx_cfg_rd.s.data;
+}
+
+/**
+ * Write a PCIe config space register indirectly. This is used for
+ * registers of the form PCIEEP_CFG??? and PCIERC?_CFG???.
+ *
+ * @pcie_port:  PCIe port to write to
+ * @cfg_offset: Address to write
+ * @val:        Value to write
+ */
+static void cvmx_pcie_cfgx_write(int pcie_port, uint32_t cfg_offset,
+				 uint32_t val)
+{
+	union cvmx_pescx_cfg_wr pescx_cfg_wr;
+	pescx_cfg_wr.u64 = 0;
+	pescx_cfg_wr.s.addr = cfg_offset;
+	pescx_cfg_wr.s.data = val;
+	cvmx_write_csr(CVMX_PESCX_CFG_WR(pcie_port), pescx_cfg_wr.u64);
+}
+
+/**
+ * Build a PCIe config space request address for a device
+ *
+ * @pcie_port: PCIe port to access
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:        Device sub function
+ * @reg:       Register to access
+ *
+ * Returns 64bit Octeon IO address
+ */
+static inline uint64_t __cvmx_pcie_build_config_addr(int pcie_port, int bus,
+						     int dev, int fn, int reg)
+{
+	union cvmx_pcie_address pcie_addr;
+	union cvmx_pciercx_cfg006 pciercx_cfg006;
+
+	pciercx_cfg006.u32 =
+	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG006(pcie_port));
+	if ((bus <= pciercx_cfg006.s.pbnum) && (dev != 0))
+		return 0;
+
+	pcie_addr.u64 = 0;
+	pcie_addr.config.upper = 2;
+	pcie_addr.config.io = 1;
+	pcie_addr.config.did = 3;
+	pcie_addr.config.subdid = 1;
+	pcie_addr.config.es = 1;
+	pcie_addr.config.port = pcie_port;
+	pcie_addr.config.ty = (bus > pciercx_cfg006.s.pbnum);
+	pcie_addr.config.bus = bus;
+	pcie_addr.config.dev = dev;
+	pcie_addr.config.func = fn;
+	pcie_addr.config.reg = reg;
+	return pcie_addr.u64;
+}
+
+/**
+ * Read 8bits from a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:        Device sub function
+ * @reg:       Register to access
+ *
+ * Returns Result of the read
+ */
+static uint8_t cvmx_pcie_config_read8(int pcie_port, int bus, int dev,
+				      int fn, int reg)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		return cvmx_read64_uint8(address);
+	else
+		return 0xff;
+}
+
+/**
+ * Read 16bits from a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:        Device sub function
+ * @reg:       Register to access
+ *
+ * Returns Result of the read
+ */
+static uint16_t cvmx_pcie_config_read16(int pcie_port, int bus, int dev,
+					int fn, int reg)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		return le16_to_cpu(cvmx_read64_uint16(address));
+	else
+		return 0xffff;
+}
+
+/**
+ * Read 32bits from a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:        Device sub function
+ * @reg:       Register to access
+ *
+ * Returns Result of the read
+ */
+static uint32_t cvmx_pcie_config_read32(int pcie_port, int bus, int dev,
+					int fn, int reg)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		return le32_to_cpu(cvmx_read64_uint32(address));
+	else
+		return 0xffffffff;
+}
+
+/**
+ * Write 8bits to a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:        Device sub function
+ * @reg:       Register to access
+ * @val:       Value to write
+ */
+static void cvmx_pcie_config_write8(int pcie_port, int bus, int dev, int fn,
+				    int reg, uint8_t val)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		cvmx_write64_uint8(address, val);
+}
+
+/**
+ * Write 16bits to a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:        Device sub function
+ * @reg:       Register to access
+ * @val:       Value to write
+ */
+static void cvmx_pcie_config_write16(int pcie_port, int bus, int dev, int fn,
+				     int reg, uint16_t val)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		cvmx_write64_uint16(address, cpu_to_le16(val));
+}
+
+/**
+ * Write 32bits to a Device's config space
+ *
+ * @pcie_port: PCIe port the device is on
+ * @bus:       Sub bus
+ * @dev:       Device ID
+ * @fn:        Device sub function
+ * @reg:       Register to access
+ * @val:       Value to write
+ */
+static void cvmx_pcie_config_write32(int pcie_port, int bus, int dev, int fn,
+				     int reg, uint32_t val)
+{
+	uint64_t address =
+	    __cvmx_pcie_build_config_addr(pcie_port, bus, dev, fn, reg);
+	if (address)
+		cvmx_write64_uint32(address, cpu_to_le32(val));
+}
+
+/**
+ * Initialize the RC config space CSRs
+ *
+ * @pcie_port: PCIe port to initialize
+ */
+static void __cvmx_pcie_rc_initialize_config_space(int pcie_port)
+{
+	union cvmx_pciercx_cfg030 pciercx_cfg030;
+	union cvmx_npei_ctl_status2 npei_ctl_status2;
+	union cvmx_pciercx_cfg070 pciercx_cfg070;
+	union cvmx_pciercx_cfg001 pciercx_cfg001;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
+	union cvmx_pciercx_cfg006 pciercx_cfg006;
+	union cvmx_pciercx_cfg008 pciercx_cfg008;
+	union cvmx_pciercx_cfg009 pciercx_cfg009;
+	union cvmx_pciercx_cfg010 pciercx_cfg010;
+	union cvmx_pciercx_cfg011 pciercx_cfg011;
+	union cvmx_pciercx_cfg035 pciercx_cfg035;
+	union cvmx_pciercx_cfg075 pciercx_cfg075;
+	union cvmx_pciercx_cfg034 pciercx_cfg034;
+
+	/* Max Payload Size (PCIE*_CFG030[MPS]) */
+	/* Max Read Request Size (PCIE*_CFG030[MRRS]) */
+	/* Relaxed-order, no-snoop enables (PCIE*_CFG030[RO_EN,NS_EN] */
+	/* Error Message Enables (PCIE*_CFG030[CE_EN,NFE_EN,FE_EN,UR_EN]) */
+	pciercx_cfg030.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG030(pcie_port));
+	/*
+	 * Max payload size = 128 bytes for best Octeon DMA
+	 * performance.
+	 */
+	pciercx_cfg030.s.mps = 0;
+	/*
+	 * Max read request size = 128 bytes for best Octeon DMA
+	 * performance.
+	 */
+	pciercx_cfg030.s.mrrs = 0;
+	/* Enable relaxed ordering. */
+	pciercx_cfg030.s.ro_en = 1;
+	/* Enable no snoop. */
+	pciercx_cfg030.s.ns_en = 1;
+	/* Correctable error reporting enable. */
+	pciercx_cfg030.s.ce_en = 1;
+	/* Non-fatal error reporting enable. */
+	pciercx_cfg030.s.nfe_en = 1;
+	/* Fatal error reporting enable. */
+	pciercx_cfg030.s.fe_en = 1;
+	/* Unsupported request reporting enable. */
+	pciercx_cfg030.s.ur_en = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG030(pcie_port),
+			     pciercx_cfg030.u32);
+
+	/*
+	 * Max Payload Size (NPEI_CTL_STATUS2[MPS]) must match
+	 * PCIE*_CFG030[MPS]
+	 *
+	 * Max Read Request Size (NPEI_CTL_STATUS2[MRRS]) must not
+	 * exceed PCIE*_CFG030[MRRS].
+	 */
+	npei_ctl_status2.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS2);
+	/* Max payload size = 128 bytes for best Octeon DMA performance */
+	npei_ctl_status2.s.mps = 0;
+	/* Max read request size = 128 bytes for best Octeon DMA performance */
+	npei_ctl_status2.s.mrrs = 0;
+	cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64);
+
+	/* ECRC Generation (PCIE*_CFG070[GE,CE]) */
+	pciercx_cfg070.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG070(pcie_port));
+	pciercx_cfg070.s.ge = 1;	/* ECRC generation enable. */
+	pciercx_cfg070.s.ce = 1;	/* ECRC check enable. */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG070(pcie_port),
+			     pciercx_cfg070.u32);
+
+	/*
+	 * Access Enables (PCIE*_CFG001[MSAE,ME]) ME and MSAE should
+	 * always be set.
+	 *
+	 * Interrupt Disable (PCIE*_CFG001[I_DIS]) System Error
+	 * Message Enable (PCIE*_CFG001[SEE])
+	 */
+	pciercx_cfg001.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG001(pcie_port));
+	pciercx_cfg001.s.msae = 1;	/* Memory space enable. */
+	pciercx_cfg001.s.me = 1;	/* Bus master enable. */
+	pciercx_cfg001.s.i_dis = 1;	/* INTx assertion disable. */
+	pciercx_cfg001.s.see = 1;	/* SERR# enable */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG001(pcie_port),
+			pciercx_cfg001.u32);
+
+	/* Advanced Error Recovery Message Enables */
+	/* (PCIE*_CFG066,PCIE*_CFG067,PCIE*_CFG069) */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG066(pcie_port), 0);
+	/* Use CVMX_PCIERCX_CFG067 hardware default */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG069(pcie_port), 0);
+
+	/* Active State Power Management (PCIE*_CFG032[ASLPC]) */
+	pciercx_cfg032.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
+	pciercx_cfg032.s.aslpc = 0;	/* Active state Link PM control. */
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG032(pcie_port),
+			     pciercx_cfg032.u32);
+
+	/* Entrance Latencies (PCIE*_CFG451[L0EL,L1EL]) */
+
+	/*
+	 * Link Width Mode (PCIERCn_CFG452[LME]) - Set during
+	 * cvmx_pcie_rc_initialize_link()
+	 *
+	 * Primary Bus Number (PCIERCn_CFG006[PBNUM])
+	 *
+	 * We set the primary bus number to 1 so IDT bridges are
+	 * happy. They don't like zero.
+	 */
+	pciercx_cfg006.u32 = 0;
+	pciercx_cfg006.s.pbnum = 1;
+	pciercx_cfg006.s.sbnum = 1;
+	pciercx_cfg006.s.subbnum = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG006(pcie_port),
+			     pciercx_cfg006.u32);
+
+	/*
+	 * Memory-mapped I/O BAR (PCIERCn_CFG008)
+	 * Most applications should disable the memory-mapped I/O BAR by
+	 * setting PCIERCn_CFG008[ML_ADDR] < PCIERCn_CFG008[MB_ADDR]
+	 */
+	pciercx_cfg008.u32 = 0;
+	pciercx_cfg008.s.mb_addr = 0x100;
+	pciercx_cfg008.s.ml_addr = 0;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG008(pcie_port),
+			     pciercx_cfg008.u32);
+
+	/*
+	 * Prefetchable BAR (PCIERCn_CFG009,PCIERCn_CFG010,PCIERCn_CFG011)
+	 * Most applications should disable the prefetchable BAR by setting
+	 * PCIERCn_CFG011[UMEM_LIMIT],PCIERCn_CFG009[LMEM_LIMIT] <
+	 * PCIERCn_CFG010[UMEM_BASE],PCIERCn_CFG009[LMEM_BASE]
+	 */
+	pciercx_cfg009.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG009(pcie_port));
+	pciercx_cfg010.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG010(pcie_port));
+	pciercx_cfg011.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG011(pcie_port));
+	pciercx_cfg009.s.lmem_base = 0x100;
+	pciercx_cfg009.s.lmem_limit = 0;
+	pciercx_cfg010.s.umem_base = 0x100;
+	pciercx_cfg011.s.umem_limit = 0;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG009(pcie_port),
+			     pciercx_cfg009.u32);
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG010(pcie_port),
+			     pciercx_cfg010.u32);
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG011(pcie_port),
+			     pciercx_cfg011.u32);
+
+	/*
+	 * System Error Interrupt Enables (PCIERCn_CFG035[SECEE,SEFEE,SENFEE])
+	 * PME Interrupt Enables (PCIERCn_CFG035[PMEIE])
+	 */
+	pciercx_cfg035.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG035(pcie_port));
+	/* System error on correctable error enable. */
+	pciercx_cfg035.s.secee = 1;
+	/* System error on fatal error enable. */
+	pciercx_cfg035.s.sefee = 1;
+	/* System error on non-fatal error enable. */
+	pciercx_cfg035.s.senfee = 1;
+	/* PME interrupt enable. */
+	pciercx_cfg035.s.pmeie = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG035(pcie_port),
+			     pciercx_cfg035.u32);
+
+	/*
+	 * Advanced Error Recovery Interrupt Enables
+	 * (PCIERCn_CFG075[CERE,NFERE,FERE])
+	 */
+	pciercx_cfg075.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG075(pcie_port));
+	/* Correctable error reporting enable. */
+	pciercx_cfg075.s.cere = 1;
+	/* Non-fatal error reporting enable. */
+	pciercx_cfg075.s.nfere = 1;
+	/* Fatal error reporting enable. */
+	pciercx_cfg075.s.fere = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG075(pcie_port),
+			     pciercx_cfg075.u32);
+
+	/* HP Interrupt Enables (PCIERCn_CFG034[HPINT_EN],
+	 * PCIERCn_CFG034[DLLS_EN,CCINT_EN])
+	 */
+	pciercx_cfg034.u32 =
+		cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG034(pcie_port));
+	/* Hot-plug interrupt enable. */
+	pciercx_cfg034.s.hpint_en = 1;
+	/* Data Link Layer state changed enable */
+	pciercx_cfg034.s.dlls_en = 1;
+	/* Command completed interrupt enable. */
+	pciercx_cfg034.s.ccint_en = 1;
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG034(pcie_port),
+			     pciercx_cfg034.u32);
+}
+
+/**
+ * Initialize a host mode PCIe link. This function takes a PCIe
+ * port from reset to a link up state. Software can then begin
+ * configuring the rest of the link.
+ *
+ * @pcie_port: PCIe port to initialize
+ *
+ * Returns Zero on success
+ */
+static int __cvmx_pcie_rc_initialize_link(int pcie_port)
+{
+	uint64_t start_cycle;
+	union cvmx_pescx_ctl_status pescx_ctl_status;
+	union cvmx_pciercx_cfg452 pciercx_cfg452;
+	union cvmx_pciercx_cfg032 pciercx_cfg032;
+	union cvmx_pciercx_cfg448 pciercx_cfg448;
+
+	/* Set the lane width */
+	pciercx_cfg452.u32 =
+	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG452(pcie_port));
+	pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port));
+	if (pescx_ctl_status.s.qlm_cfg == 0) {
+		/* We're in 8 lane (56XX) or 4 lane (54XX) mode */
+		pciercx_cfg452.s.lme = 0xf;
+	} else {
+		/* We're in 4 lane (56XX) or 2 lane (52XX) mode */
+		pciercx_cfg452.s.lme = 0x7;
+	}
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG452(pcie_port),
+			     pciercx_cfg452.u32);
+
+	/*
+	 * CN52XX pass 1.x has an errata where length mismatches on UR
+	 * responses can cause bus errors on 64bit memory
+	 * reads. Turning off length error checking fixes this.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		union cvmx_pciercx_cfg455 pciercx_cfg455;
+		pciercx_cfg455.u32 =
+		    cvmx_pcie_cfgx_read(pcie_port,
+					CVMX_PCIERCX_CFG455(pcie_port));
+		pciercx_cfg455.s.m_cpl_len_err = 1;
+		cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG455(pcie_port),
+				     pciercx_cfg455.u32);
+	}
+
+	/* Lane swap needs to be manually enabled for CN52XX */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX) && (pcie_port == 1)) {
+		pescx_ctl_status.s.lane_swp = 1;
+		cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port),
+			       pescx_ctl_status.u64);
+	}
+
+	/* Bring up the link */
+	pescx_ctl_status.u64 = cvmx_read_csr(CVMX_PESCX_CTL_STATUS(pcie_port));
+	pescx_ctl_status.s.lnk_enb = 1;
+	cvmx_write_csr(CVMX_PESCX_CTL_STATUS(pcie_port), pescx_ctl_status.u64);
+
+	/*
+	 * CN52XX pass 1.0: Due to a bug in 2nd order CDR, it needs to
+	 * be disabled.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0))
+		__cvmx_helper_errata_qlm_disable_2nd_order_cdr(0);
+
+	/* Wait for the link to come up */
+	cvmx_dprintf("PCIe: Waiting for port %d link\n", pcie_port);
+	start_cycle = cvmx_get_cycle();
+	do {
+		if (cvmx_get_cycle() - start_cycle >
+		    2 * cvmx_sysinfo_get()->cpu_clock_hz) {
+			cvmx_dprintf("PCIe: Port %d link timeout\n",
+				     pcie_port);
+			return -1;
+		}
+		cvmx_wait(10000);
+		pciercx_cfg032.u32 =
+		    cvmx_pcie_cfgx_read(pcie_port,
+					CVMX_PCIERCX_CFG032(pcie_port));
+	} while (pciercx_cfg032.s.dlla == 0);
+
+	/* Display the link status */
+	cvmx_dprintf("PCIe: Port %d link active, %d lanes\n", pcie_port,
+		     pciercx_cfg032.s.nlw);
+
+	/*
+	 * Update the Replay Time Limit. Empirically, some PCIe
+	 * devices take a little longer to respond than expected under
+	 * load. As a workaround for this we configure the Replay Time
+	 * Limit to the value expected for a 512 byte MPS instead of
+	 * our actual 256 byte MPS. The numbers below are directly
+	 * from the PCIe spec table 3-4.
+	 */
+	pciercx_cfg448.u32 =
+	    cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG448(pcie_port));
+	switch (pciercx_cfg032.s.nlw) {
+	case 1:		/* 1 lane */
+		pciercx_cfg448.s.rtl = 1677;
+		break;
+	case 2:		/* 2 lanes */
+		pciercx_cfg448.s.rtl = 867;
+		break;
+	case 4:		/* 4 lanes */
+		pciercx_cfg448.s.rtl = 462;
+		break;
+	case 8:		/* 8 lanes */
+		pciercx_cfg448.s.rtl = 258;
+		break;
+	}
+	cvmx_pcie_cfgx_write(pcie_port, CVMX_PCIERCX_CFG448(pcie_port),
+			     pciercx_cfg448.u32);
+
+	return 0;
+}
+
+/**
+ * Initialize a PCIe port for use in host(RC) mode. It doesn't
+ * enumerate the bus.
+ *
+ * @pcie_port: PCIe port to initialize
+ *
+ * Returns Zero on success
+ */
+static int cvmx_pcie_rc_initialize(int pcie_port)
+{
+	int i;
+	union cvmx_ciu_soft_prst ciu_soft_prst;
+	union cvmx_pescx_bist_status pescx_bist_status;
+	union cvmx_pescx_bist_status2 pescx_bist_status2;
+	union cvmx_npei_ctl_status npei_ctl_status;
+	union cvmx_npei_mem_access_ctl npei_mem_access_ctl;
+	union cvmx_npei_mem_access_subidx mem_access_subid;
+	union cvmx_npei_dbg_data npei_dbg_data;
+	union cvmx_pescx_ctl_status2 pescx_ctl_status2;
+
+	/*
+	 * Make sure we aren't trying to setup a target mode interface
+	 * in host mode.
+	 */
+	npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS);
+	if ((pcie_port == 0) && !npei_ctl_status.s.host_mode) {
+		cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() called "
+			     "on port0, but port0 is not in host mode\n");
+		return -1;
+	}
+
+	/*
+	 * Make sure a CN52XX isn't trying to bring up port 1 when it
+	 * is disabled.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX)) {
+		npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
+		if ((pcie_port == 1) && npei_dbg_data.cn52xx.qlm0_link_width) {
+			cvmx_dprintf("PCIe: ERROR: cvmx_pcie_rc_initialize() "
+				     "called on port1, but port1 is "
+				     "disabled\n");
+			return -1;
+		}
+	}
+
+	/*
+	 * PCIe switch arbitration mode. '0' == fixed priority NPEI,
+	 * PCIe0, then PCIe1. '1' == round robin.
+	 */
+	npei_ctl_status.s.arb = 1;
+	/* Allow up to 0x20 config retries */
+	npei_ctl_status.s.cfg_rtry = 0x20;
+	/*
+	 * CN52XX pass1.x has an errata where P0_NTAGS and P1_NTAGS
+	 * don't reset.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		npei_ctl_status.s.p0_ntags = 0x20;
+		npei_ctl_status.s.p1_ntags = 0x20;
+	}
+	cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS, npei_ctl_status.u64);
+
+	/* Bring the PCIe out of reset */
+	if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_EBH5200) {
+		/*
+		 * The EBH5200 board swapped the PCIe reset lines on
+		 * the board. As a workaround for this bug, we bring
+		 * both PCIe ports out of reset at the same time
+		 * instead of on separate calls. So for port 0, we
+		 * bring both out of reset and do nothing on port 1.
+		 */
+		if (pcie_port == 0) {
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+			/*
+			 * After a chip reset the PCIe will also be in
+			 * reset. If it isn't, most likely someone is
+			 * trying to init it again without a proper
+			 * PCIe reset.
+			 */
+			if (ciu_soft_prst.s.soft_prst == 0) {
+				/* Reset the ports */
+				ciu_soft_prst.s.soft_prst = 1;
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST,
+					       ciu_soft_prst.u64);
+				ciu_soft_prst.u64 =
+				    cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+				ciu_soft_prst.s.soft_prst = 1;
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST1,
+					       ciu_soft_prst.u64);
+				/* Wait until pcie resets the ports. */
+				udelay(2000);
+			}
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+		}
+	} else {
+		/*
+		 * The normal case: The PCIe ports are completely
+		 * separate and can be brought out of reset
+		 * independently.
+		 */
+		if (pcie_port)
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+		else
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+		/*
+		 * After a chip reset the PCIe will also be in
+		 * reset. If it isn't, most likely someone is trying
+		 * to init it again without a proper PCIe reset.
+		 */
+		if (ciu_soft_prst.s.soft_prst == 0) {
+			/* Reset the port */
+			ciu_soft_prst.s.soft_prst = 1;
+			if (pcie_port)
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST1,
+					       ciu_soft_prst.u64);
+			else
+				cvmx_write_csr(CVMX_CIU_SOFT_PRST,
+					       ciu_soft_prst.u64);
+			/* Wait until pcie resets the ports. */
+			udelay(2000);
+		}
+		if (pcie_port) {
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST1);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST1, ciu_soft_prst.u64);
+		} else {
+			ciu_soft_prst.u64 = cvmx_read_csr(CVMX_CIU_SOFT_PRST);
+			ciu_soft_prst.s.soft_prst = 0;
+			cvmx_write_csr(CVMX_CIU_SOFT_PRST, ciu_soft_prst.u64);
+		}
+	}
+
+	/*
+	 * Wait for PCIe reset to complete. Due to errata PCIE-700, we
+	 * don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a
+	 * fixed number of cycles.
+	 */
+	cvmx_wait(400000);
+
+	/* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of CN56XX and
+	   CN52XX, so we only probe it on newer chips */
+	if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
+	    && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
+		/* Clear PCLK_RUN so we can check if the clock is running */
+		pescx_ctl_status2.u64 =
+		    cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port));
+		pescx_ctl_status2.s.pclk_run = 1;
+		cvmx_write_csr(CVMX_PESCX_CTL_STATUS2(pcie_port),
+			       pescx_ctl_status2.u64);
+		/*
+		 * Now that we cleared PCLK_RUN, wait for it to be set
+		 * again telling us the clock is running.
+		 */
+		if (CVMX_WAIT_FOR_FIELD64(CVMX_PESCX_CTL_STATUS2(pcie_port),
+					  union cvmx_pescx_ctl_status2,
+					  pclk_run, ==, 1, 10000)) {
+			cvmx_dprintf("PCIe: Port %d isn't clocked, skipping.\n",
+				     pcie_port);
+			return -1;
+		}
+	}
+
+	/*
+	 * Check and make sure PCIe came out of reset. If it doesn't
+	 * the board probably hasn't wired the clocks up and the
+	 * interface should be skipped.
+	 */
+	pescx_ctl_status2.u64 =
+	    cvmx_read_csr(CVMX_PESCX_CTL_STATUS2(pcie_port));
+	if (pescx_ctl_status2.s.pcierst) {
+		cvmx_dprintf("PCIe: Port %d stuck in reset, skipping.\n",
+			     pcie_port);
+		return -1;
+	}
+
+	/*
+	 * Check BIST2 status. If any bits are set skip this interface. This
+	 * is an attempt to catch PCIE-813 on pass 1 parts.
+	 */
+	pescx_bist_status2.u64 =
+	    cvmx_read_csr(CVMX_PESCX_BIST_STATUS2(pcie_port));
+	if (pescx_bist_status2.u64) {
+		cvmx_dprintf("PCIe: Port %d BIST2 failed. Most likely this "
+			     "port isn't hooked up, skipping.\n",
+			     pcie_port);
+		return -1;
+	}
+
+	/* Check BIST status */
+	pescx_bist_status.u64 =
+	    cvmx_read_csr(CVMX_PESCX_BIST_STATUS(pcie_port));
+	if (pescx_bist_status.u64)
+		cvmx_dprintf("PCIe: BIST FAILED for port %d (0x%016llx)\n",
+			     pcie_port, CAST64(pescx_bist_status.u64));
+
+	/* Initialize the config space CSRs */
+	__cvmx_pcie_rc_initialize_config_space(pcie_port);
+
+	/* Bring the link up */
+	if (__cvmx_pcie_rc_initialize_link(pcie_port)) {
+		cvmx_dprintf
+		    ("PCIe: ERROR: cvmx_pcie_rc_initialize_link() failed\n");
+		return -1;
+	}
+
+	/* Store merge control (NPEI_MEM_ACCESS_CTL[TIMER,MAX_WORD]) */
+	npei_mem_access_ctl.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL);
+	/* Allow 16 words to combine */
+	npei_mem_access_ctl.s.max_word = 0;
+	/* Wait up to 127 cycles for more data */
+	npei_mem_access_ctl.s.timer = 127;
+	cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_CTL, npei_mem_access_ctl.u64);
+
+	/* Setup Mem access SubDIDs */
+	mem_access_subid.u64 = 0;
+	/* Port the request is sent to. */
+	mem_access_subid.s.port = pcie_port;
+	/* Due to an errata on pass 1 chips, no merging is allowed. */
+	mem_access_subid.s.nmerge = 1;
+	/* Endian-swap for Reads. */
+	mem_access_subid.s.esr = 1;
+	/* Endian-swap for Writes. */
+	mem_access_subid.s.esw = 1;
+	/* No Snoop for Reads. */
+	mem_access_subid.s.nsr = 1;
+	/* No Snoop for Writes. */
+	mem_access_subid.s.nsw = 1;
+	/* Disable Relaxed Ordering for Reads. */
+	mem_access_subid.s.ror = 0;
+	/* Disable Relaxed Ordering for Writes. */
+	mem_access_subid.s.row = 0;
+	/* PCIe Adddress Bits <63:34>. */
+	mem_access_subid.s.ba = 0;
+
+	/*
+	 * Setup mem access 12-15 for port 0, 16-19 for port 1,
+	 * supplying 36 bits of address space.
+	 */
+	for (i = 12 + pcie_port * 4; i < 16 + pcie_port * 4; i++) {
+		cvmx_write_csr(CVMX_PEXP_NPEI_MEM_ACCESS_SUBIDX(i),
+			       mem_access_subid.u64);
+		/* Set each SUBID to extend the addressable range */
+		mem_access_subid.s.ba += 1;
+	}
+
+	/*
+	 * Disable the peer to peer forwarding register. This must be
+	 * setup by the OS after it enumerates the bus and assigns
+	 * addresses to the PCIe busses.
+	 */
+	for (i = 0; i < 4; i++) {
+		cvmx_write_csr(CVMX_PESCX_P2P_BARX_START(i, pcie_port), -1);
+		cvmx_write_csr(CVMX_PESCX_P2P_BARX_END(i, pcie_port), -1);
+	}
+
+	/* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */
+	cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0);
+
+	/*
+	 * Disable Octeon's BAR1. It isn't needed in RC mode since
+	 * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into
+	 * the 2nd 256MB of memory.
+	 */
+	cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1);
+
+	/*
+	 * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take
+	 * precedence where they overlap. It also overlaps with the
+	 * device addresses, so make sure the peer to peer forwarding
+	 * is set right.
+	 */
+	cvmx_write_csr(CVMX_PESCX_P2N_BAR2_START(pcie_port), 0);
+
+	/*
+	 * Setup BAR2 attributes
+	 *
+	 * Relaxed Ordering (NPEI_CTL_PORTn[PTLP_RO,CTLP_RO, WAIT_COM])
+	 * - PTLP_RO,CTLP_RO should normally be set (except for debug).
+	 * - WAIT_COM=0 will likely work for all applications.
+	 *
+	 * Load completion relaxed ordering (NPEI_CTL_PORTn[WAITL_COM]).
+	 */
+	if (pcie_port) {
+		union cvmx_npei_ctl_port1 npei_ctl_port;
+		npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT1);
+		npei_ctl_port.s.bar2_enb = 1;
+		npei_ctl_port.s.bar2_esx = 1;
+		npei_ctl_port.s.bar2_cax = 0;
+		npei_ctl_port.s.ptlp_ro = 1;
+		npei_ctl_port.s.ctlp_ro = 1;
+		npei_ctl_port.s.wait_com = 0;
+		npei_ctl_port.s.waitl_com = 0;
+		cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT1, npei_ctl_port.u64);
+	} else {
+		union cvmx_npei_ctl_port0 npei_ctl_port;
+		npei_ctl_port.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_PORT0);
+		npei_ctl_port.s.bar2_enb = 1;
+		npei_ctl_port.s.bar2_esx = 1;
+		npei_ctl_port.s.bar2_cax = 0;
+		npei_ctl_port.s.ptlp_ro = 1;
+		npei_ctl_port.s.ctlp_ro = 1;
+		npei_ctl_port.s.wait_com = 0;
+		npei_ctl_port.s.waitl_com = 0;
+		cvmx_write_csr(CVMX_PEXP_NPEI_CTL_PORT0, npei_ctl_port.u64);
+	}
+	return 0;
+}
+
+
+/* Above was cvmx-pcie.c, below original pcie.c */
+
+
+/**
+ * Map a PCI device to the appropriate interrupt line
+ *
+ * @dev:    The Linux PCI device structure for the device to map
+ * @slot:   The slot number for this device on __BUS 0__. Linux
+ *               enumerates through all the bridges and figures out the
+ *               slot on Bus 0 where this device eventually hooks to.
+ * @pin:    The PCI interrupt pin read from the device, then swizzled
+ *               as it goes through each bridge.
+ * Returns Interrupt number for the device
+ */
+int __init octeon_pcie_pcibios_map_irq(const struct pci_dev *dev,
+				       u8 slot, u8 pin)
+{
+	/*
+	 * The EBH5600 board with the PCI to PCIe bridge mistakenly
+	 * wires the first slot for both device id 2 and interrupt
+	 * A. According to the PCI spec, device id 2 should be C. The
+	 * following kludge attempts to fix this.
+	 */
+	if (strstr(octeon_board_type_string(), "EBH5600") &&
+	    dev->bus && dev->bus->parent) {
+		/*
+		 * Iterate all the way up the device chain and find
+		 * the root bus.
+		 */
+		while (dev->bus && dev->bus->parent)
+			dev = to_pci_dev(dev->bus->bridge);
+		/* If the root bus is number 0 and the PEX 8114 is the
+		 * root, assume we are behind the miswired bus. We
+		 * need to correct the swizzle level by two. Yuck.
+		 */
+		if ((dev->bus->number == 0) &&
+		    (dev->vendor == 0x10b5) && (dev->device == 0x8114)) {
+			/*
+			 * The pin field is one based, not zero. We
+			 * need to swizzle it by minus two.
+			 */
+			pin = ((pin - 3) & 3) + 1;
+		}
+	}
+	/*
+	 * The -1 is because pin starts with one, not zero. It might
+	 * be that this equation needs to include the slot number, but
+	 * I don't have hardware to check that against.
+	 */
+	return pin - 1 + OCTEON_IRQ_PCI_INT0;
+}
+
+/**
+ * Read a value from configuration space
+ *
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
+ */
+static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
+					  unsigned int devfn, int reg, int size,
+					  u32 *val)
+{
+	union octeon_cvmemctl cvmmemctl;
+	union octeon_cvmemctl cvmmemctl_save;
+	int bus_number = bus->number;
+
+	/*
+	 * We need to force the bus number to be zero on the root
+	 * bus. Linux numbers the 2nd root bus to start after all
+	 * buses on root 0.
+	 */
+	if (bus->parent == NULL)
+		bus_number = 0;
+
+	/*
+	 * PCIe only has a single device connected to Octeon. It is
+	 * always device ID 0. Don't bother doing reads for other
+	 * device IDs on the first segment.
+	 */
+	if ((bus_number == 0) && (devfn >> 3 != 0))
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+
+	/*
+	 * The following is a workaround for the CN57XX, CN56XX,
+	 * CN55XX, and CN54XX errata with PCIe config reads from non
+	 * existent devices.  These chips will hang the PCIe link if a
+	 * config read is performed that causes a UR response.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) ||
+	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1)) {
+		/*
+		 * For our EBH5600 board, port 0 has a bridge with two
+		 * PCI-X slots. We need a new special checks to make
+		 * sure we only probe valid stuff.  The PCIe->PCI-X
+		 * bridge only respondes to device ID 0, function
+		 * 0-1
+		 */
+		if ((bus_number == 0) && (devfn >= 2))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+		/*
+		 * The PCI-X slots are device ID 2,3. Choose one of
+		 * the below "if" blocks based on what is plugged into
+		 * the board.
+		 */
+#if 1
+		/* Use this option if you aren't using either slot */
+		if (bus_number == 1)
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#elif 0
+		/*
+		 * Use this option if you are using the first slot but
+		 * not the second.
+		 */
+		if ((bus_number == 1) && (devfn >> 3 != 2))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#elif 0
+		/*
+		 * Use this option if you are using the second slot
+		 * but not the first.
+		 */
+		if ((bus_number == 1) && (devfn >> 3 != 3))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#elif 0
+		/* Use this opion if you are using both slots */
+		if ((bus_number == 1) &&
+		    !((devfn == (2 << 3)) || (devfn == (3 << 3))))
+			return PCIBIOS_FUNC_NOT_SUPPORTED;
+#endif
+
+		/*
+		 * Shorten the DID timeout so bus errors for PCIe
+		 * config reads from non existent devices happen
+		 * faster. This allows us to continue booting even if
+		 * the above "if" checks are wrong.  Once one of these
+		 * errors happens, the PCIe port is dead.
+		 */
+		cvmmemctl_save.u64 = __read_64bit_c0_register($11, 7);
+		cvmmemctl.u64 = cvmmemctl_save.u64;
+		cvmmemctl.s.didtto = 2;
+		__write_64bit_c0_register($11, 7, cvmmemctl.u64);
+	}
+
+	switch (size) {
+	case 4:
+		*val = cvmx_pcie_config_read32(pcie_port, bus_number,
+					       devfn >> 3, devfn & 0x7, reg);
+		break;
+	case 2:
+		*val = cvmx_pcie_config_read16(pcie_port, bus_number,
+					       devfn >> 3, devfn & 0x7, reg);
+		break;
+	case 1:
+		*val = cvmx_pcie_config_read8(pcie_port, bus_number, devfn >> 3,
+					      devfn & 0x7, reg);
+		break;
+	default:
+		return PCIBIOS_FUNC_NOT_SUPPORTED;
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1) ||
+	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_1))
+		__write_64bit_c0_register($11, 7, cvmmemctl_save.u64);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int octeon_pcie0_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int reg, int size, u32 *val)
+{
+	return octeon_pcie_read_config(0, bus, devfn, reg, size, val);
+}
+
+static int octeon_pcie1_read_config(struct pci_bus *bus, unsigned int devfn,
+				    int reg, int size, u32 *val)
+{
+	return octeon_pcie_read_config(1, bus, devfn, reg, size, val);
+}
+
+
+
+/**
+ * Write a value to PCI configuration space
+ *
+ * @bus:
+ * @devfn:
+ * @reg:
+ * @size:
+ * @val:
+ * Returns
+ */
+static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
+					   unsigned int devfn, int reg,
+					   int size, u32 val)
+{
+	int bus_number = bus->number;
+	/*
+	 * We need to force the bus number to be zero on the root
+	 * bus. Linux numbers the 2nd root bus to start after all
+	 * busses on root 0.
+	 */
+	if (bus->parent == NULL)
+		bus_number = 0;
+
+	switch (size) {
+	case 4:
+		cvmx_pcie_config_write32(pcie_port, bus_number, devfn >> 3,
+					 devfn & 0x7, reg, val);
+		return PCIBIOS_SUCCESSFUL;
+	case 2:
+		cvmx_pcie_config_write16(pcie_port, bus_number, devfn >> 3,
+					 devfn & 0x7, reg, val);
+		return PCIBIOS_SUCCESSFUL;
+	case 1:
+		cvmx_pcie_config_write8(pcie_port, bus_number, devfn >> 3,
+					devfn & 0x7, reg, val);
+		return PCIBIOS_SUCCESSFUL;
+	}
+#if PCI_CONFIG_SPACE_DELAY
+	udelay(PCI_CONFIG_SPACE_DELAY);
+#endif
+	return PCIBIOS_FUNC_NOT_SUPPORTED;
+}
+
+static int octeon_pcie0_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int reg, int size, u32 val)
+{
+	return octeon_pcie_write_config(0, bus, devfn, reg, size, val);
+}
+
+static int octeon_pcie1_write_config(struct pci_bus *bus, unsigned int devfn,
+				     int reg, int size, u32 val)
+{
+	return octeon_pcie_write_config(1, bus, devfn, reg, size, val);
+}
+
+static struct pci_ops octeon_pcie0_ops = {
+	octeon_pcie0_read_config,
+	octeon_pcie0_write_config,
+};
+
+static struct resource octeon_pcie0_mem_resource = {
+	.name = "Octeon PCIe0 MEM",
+	.flags = IORESOURCE_MEM,
+};
+
+static struct resource octeon_pcie0_io_resource = {
+	.name = "Octeon PCIe0 IO",
+	.flags = IORESOURCE_IO,
+};
+
+static struct pci_controller octeon_pcie0_controller = {
+	.pci_ops = &octeon_pcie0_ops,
+	.mem_resource = &octeon_pcie0_mem_resource,
+	.io_resource = &octeon_pcie0_io_resource,
+};
+
+static struct pci_ops octeon_pcie1_ops = {
+	octeon_pcie1_read_config,
+	octeon_pcie1_write_config,
+};
+
+static struct resource octeon_pcie1_mem_resource = {
+	.name = "Octeon PCIe1 MEM",
+	.flags = IORESOURCE_MEM,
+};
+
+static struct resource octeon_pcie1_io_resource = {
+	.name = "Octeon PCIe1 IO",
+	.flags = IORESOURCE_IO,
+};
+
+static struct pci_controller octeon_pcie1_controller = {
+	.pci_ops = &octeon_pcie1_ops,
+	.mem_resource = &octeon_pcie1_mem_resource,
+	.io_resource = &octeon_pcie1_io_resource,
+};
+
+
+/**
+ * Initialize the Octeon PCIe controllers
+ *
+ * Returns
+ */
+static int __init octeon_pcie_setup(void)
+{
+	union cvmx_npei_ctl_status npei_ctl_status;
+	int result;
+
+	/* These chips don't have PCIe */
+	if (!octeon_has_feature(OCTEON_FEATURE_PCIE))
+		return 0;
+
+	/* Point pcibios_map_irq() to the PCIe version of it */
+	octeon_pcibios_map_irq = octeon_pcie_pcibios_map_irq;
+
+	/* Use the PCIe based DMA mappings */
+	octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_PCIE;
+
+	/*
+	 * PCIe I/O range. It is based on port 0 but includes up until
+	 * port 1's end.
+	 */
+	set_io_port_base(CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(0)));
+	ioport_resource.start = 0;
+	ioport_resource.end =
+		cvmx_pcie_get_io_base_address(1) -
+		cvmx_pcie_get_io_base_address(0) + cvmx_pcie_get_io_size(1) - 1;
+
+	npei_ctl_status.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_CTL_STATUS);
+	if (npei_ctl_status.s.host_mode) {
+		pr_notice("PCIe: Initializing port 0\n");
+		result = cvmx_pcie_rc_initialize(0);
+		if (result == 0) {
+			/* Memory offsets are physical addresses */
+			octeon_pcie0_controller.mem_offset =
+				cvmx_pcie_get_mem_base_address(0);
+			/* IO offsets are Mips virtual addresses */
+			octeon_pcie0_controller.io_map_base =
+				CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address
+						(0));
+			octeon_pcie0_controller.io_offset = 0;
+			/*
+			 * To keep things similar to PCI, we start
+			 * device addresses at the same place as PCI
+			 * uisng big bar support. This normally
+			 * translates to 4GB-256MB, which is the same
+			 * as most x86 PCs.
+			 */
+			octeon_pcie0_controller.mem_resource->start =
+				cvmx_pcie_get_mem_base_address(0) +
+				(4ul << 30) - (OCTEON_PCI_BAR1_HOLE_SIZE << 20);
+			octeon_pcie0_controller.mem_resource->end =
+				cvmx_pcie_get_mem_base_address(0) +
+				cvmx_pcie_get_mem_size(0) - 1;
+			/*
+			 * Ports must be above 16KB for the ISA bus
+			 * filtering in the PCI-X to PCI bridge.
+			 */
+			octeon_pcie0_controller.io_resource->start = 4 << 10;
+			octeon_pcie0_controller.io_resource->end =
+				cvmx_pcie_get_io_size(0) - 1;
+			register_pci_controller(&octeon_pcie0_controller);
+		}
+	} else {
+		pr_notice("PCIe: Port 0 in endpoint mode, skipping.\n");
+	}
+
+	/* Skip the 2nd port on CN52XX if port 0 is in 4 lane mode */
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX)) {
+		union cvmx_npei_dbg_data npei_dbg_data;
+		npei_dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
+		if (npei_dbg_data.cn52xx.qlm0_link_width)
+			return 0;
+	}
+
+	pr_notice("PCIe: Initializing port 1\n");
+	result = cvmx_pcie_rc_initialize(1);
+	if (result == 0) {
+		/* Memory offsets are physical addresses */
+		octeon_pcie1_controller.mem_offset =
+			cvmx_pcie_get_mem_base_address(1);
+		/* IO offsets are Mips virtual addresses */
+		octeon_pcie1_controller.io_map_base =
+			CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(1));
+		octeon_pcie1_controller.io_offset =
+			cvmx_pcie_get_io_base_address(1) -
+			cvmx_pcie_get_io_base_address(0);
+		/*
+		 * To keep things similar to PCI, we start device
+		 * addresses at the same place as PCI uisng big bar
+		 * support. This normally translates to 4GB-256MB,
+		 * which is the same as most x86 PCs.
+		 */
+		octeon_pcie1_controller.mem_resource->start =
+			cvmx_pcie_get_mem_base_address(1) + (4ul << 30) -
+			(OCTEON_PCI_BAR1_HOLE_SIZE << 20);
+		octeon_pcie1_controller.mem_resource->end =
+			cvmx_pcie_get_mem_base_address(1) +
+			cvmx_pcie_get_mem_size(1) - 1;
+		/*
+		 * Ports must be above 16KB for the ISA bus filtering
+		 * in the PCI-X to PCI bridge.
+		 */
+		octeon_pcie1_controller.io_resource->start =
+			cvmx_pcie_get_io_base_address(1) -
+			cvmx_pcie_get_io_base_address(0);
+		octeon_pcie1_controller.io_resource->end =
+			octeon_pcie1_controller.io_resource->start +
+			cvmx_pcie_get_io_size(1) - 1;
+		register_pci_controller(&octeon_pcie1_controller);
+	}
+	return 0;
+}
+
+arch_initcall(octeon_pcie_setup);
-- 
cgit v1.2.3


From baf922780251d12bc1c24c83df60c4c278abb745 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 3 Jul 2009 07:11:15 +0100
Subject: MIPS: Fix CONFIG_FLATMEM version of pfn_valid()

For systems which do not define PHYS_OFFSET as 0 pfn_valid() may falsely
have returned 0 on most configurations.  Bug introduced by commit
752fbeb2e3555c0d236e992f1195fd7ce30e728d (linux-mips.org) rsp.
6f284a2ce7b8bc49cb8455b1763357897a899abb (kernel.org) titled "[MIPS]
FLATMEM: introduce PHYS_OFFSET."

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/page.h | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index dc0eaa73128..96a14a426a7 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -165,7 +165,14 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 #ifdef CONFIG_FLATMEM
 
-#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
+#define pfn_valid(pfn)							\
+({									\
+	unsigned long __pfn = (pfn);					\
+	/* avoid <linux/bootmem.h> include hell */			\
+	extern unsigned long min_low_pfn;				\
+									\
+	__pfn >= min_low_pfn && __pfn < max_mapnr;			\
+})
 
 #elif defined(CONFIG_SPARSEMEM)
 
-- 
cgit v1.2.3


From 1fde902d52ee13ab9fab155bbae757fdf7daf0c1 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 17:28:57 +0200
Subject: x86: atomic64: Export APIs to modules

atomic64_t primitives are used by a handful of drivers,
so export the APIs consistently. These were inlined
before.

Also mark atomic64_32.o a core object, so that the symbols
are available even if not linked to core kernel pieces.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/Makefile      |  2 +-
 arch/x86/lib/atomic64_32.c | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index c3c657c8bb8..07c31899c9c 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,7 +10,7 @@ lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 
 ifeq ($(CONFIG_X86_32),y)
-        lib-y += atomic64_32.o
+        obj-y += atomic64_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
         lib-y += semaphore_32.o string_32.o
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index cd11803f944..6722a092e40 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -1,5 +1,7 @@
 #include <linux/compiler.h>
+#include <linux/module.h>
 #include <linux/types.h>
+
 #include <asm/processor.h>
 #include <asm/cmpxchg.h>
 #include <asm/atomic.h>
@@ -21,6 +23,7 @@ u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val)
 {
 	return cmpxchg8b(&ptr->counter, old_val, new_val);
 }
+EXPORT_SYMBOL(atomic64_cmpxchg);
 
 /**
  * atomic64_xchg - xchg atomic64 variable
@@ -41,6 +44,7 @@ u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
 
 	return old_val;
 }
+EXPORT_SYMBOL(atomic64_xchg);
 
 /**
  * atomic64_set - set atomic64 variable
@@ -53,6 +57,7 @@ void atomic64_set(atomic64_t *ptr, u64 new_val)
 {
 	atomic64_xchg(ptr, new_val);
 }
+EXPORT_SYMBOL(atomic64_read);
 
 /**
  * atomic64_read - read atomic64 variable
@@ -74,6 +79,7 @@ u64 atomic64_read(atomic64_t *ptr)
 
 	return res;
 }
+EXPORT_SYMBOL(atomic64_read);
 
 /**
  * atomic64_add_return - add and return
@@ -103,21 +109,25 @@ noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
 
 	return new_val;
 }
+EXPORT_SYMBOL(atomic64_add_return);
 
 u64 atomic64_sub_return(u64 delta, atomic64_t *ptr)
 {
 	return atomic64_add_return(-delta, ptr);
 }
+EXPORT_SYMBOL(atomic64_sub_return);
 
 u64 atomic64_inc_return(atomic64_t *ptr)
 {
 	return atomic64_add_return(1, ptr);
 }
+EXPORT_SYMBOL(atomic64_inc_return);
 
 u64 atomic64_dec_return(atomic64_t *ptr)
 {
 	return atomic64_sub_return(1, ptr);
 }
+EXPORT_SYMBOL(atomic64_dec_return);
 
 /**
  * atomic64_add - add integer to atomic64 variable
@@ -130,6 +140,7 @@ void atomic64_add(u64 delta, atomic64_t *ptr)
 {
 	atomic64_add_return(delta, ptr);
 }
+EXPORT_SYMBOL(atomic64_add);
 
 /**
  * atomic64_sub - subtract the atomic64 variable
@@ -142,6 +153,7 @@ void atomic64_sub(u64 delta, atomic64_t *ptr)
 {
 	atomic64_add(-delta, ptr);
 }
+EXPORT_SYMBOL(atomic64_sub);
 
 /**
  * atomic64_sub_and_test - subtract value from variable and test result
@@ -158,6 +170,7 @@ int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
 
 	return old_val == 0;
 }
+EXPORT_SYMBOL(atomic64_sub_and_test);
 
 /**
  * atomic64_inc - increment atomic64 variable
@@ -169,6 +182,7 @@ void atomic64_inc(atomic64_t *ptr)
 {
 	atomic64_add(1, ptr);
 }
+EXPORT_SYMBOL(atomic64_inc);
 
 /**
  * atomic64_dec - decrement atomic64 variable
@@ -180,6 +194,7 @@ void atomic64_dec(atomic64_t *ptr)
 {
 	atomic64_sub(1, ptr);
 }
+EXPORT_SYMBOL(atomic64_dec);
 
 /**
  * atomic64_dec_and_test - decrement and test
@@ -193,6 +208,7 @@ int atomic64_dec_and_test(atomic64_t *ptr)
 {
 	return atomic64_sub_and_test(1, ptr);
 }
+EXPORT_SYMBOL(atomic64_dec_and_test);
 
 /**
  * atomic64_inc_and_test - increment and test
@@ -206,6 +222,7 @@ int atomic64_inc_and_test(atomic64_t *ptr)
 {
 	return atomic64_sub_and_test(-1, ptr);
 }
+EXPORT_SYMBOL(atomic64_inc_and_test);
 
 /**
  * atomic64_add_negative - add and test if negative
@@ -222,3 +239,4 @@ int atomic64_add_negative(u64 delta, atomic64_t *ptr)
 
 	return old_val < 0;
 }
+EXPORT_SYMBOL(atomic64_add_negative);
-- 
cgit v1.2.3


From 3a8d1788b37435baf6c296f4ea8beb4fa4955f44 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 19:56:36 +0200
Subject: x86: atomic64: Improve atomic64_xchg()

Remove the read-first logic from atomic64_xchg() and simplify
the loop.

This function was the last user of __atomic64_read() - remove it.

Also, change the 'real_val' assumption from the somewhat quirky
1ULL << 32 value to the (just as arbitrary, but simpler) value
of 0.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <tip-05118ab8859492ac9ddda0154cf90e37b0a4a0b0@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/atomic_32.h |  9 ---------
 arch/x86/lib/atomic64_32.c       | 21 +++++++++++++++------
 2 files changed, 15 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index aa045deb2e7..d7c8849b8c6 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -268,15 +268,6 @@ typedef struct {
 
 #define ATOMIC64_INIT(val)	{ (val) }
 
-/**
- * atomic64_read - read atomic64 variable
- * @ptr: pointer of type atomic64_t
- *
- * Atomically reads the value of @v.
- * Doesn't imply a read memory barrier.
- */
-#define __atomic64_read(ptr)		((ptr)->counter)
-
 extern u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old_val, u64 new_val);
 
 /**
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index 6722a092e40..a804f96e90e 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -33,14 +33,23 @@ EXPORT_SYMBOL(atomic64_cmpxchg);
  * Atomically xchgs the value of @ptr to @new_val and returns
  * the old value.
  */
-
 u64 atomic64_xchg(atomic64_t *ptr, u64 new_val)
 {
-	u64 old_val;
+	/*
+	 * Try first with a (possibly incorrect) assumption about
+	 * what we have there. We'll do two loops most likely,
+	 * but we'll get an ownership MESI transaction straight away
+	 * instead of a read transaction followed by a
+	 * flush-for-ownership transaction:
+	 */
+	u64 old_val, real_val = 0;
 
 	do {
-		old_val = __atomic64_read(ptr);
-	} while (atomic64_cmpxchg(ptr, old_val, new_val) != old_val);
+		old_val = real_val;
+
+		real_val = atomic64_cmpxchg(ptr, old_val, new_val);
+
+	} while (real_val != old_val);
 
 	return old_val;
 }
@@ -91,13 +100,13 @@ EXPORT_SYMBOL(atomic64_read);
 noinline u64 atomic64_add_return(u64 delta, atomic64_t *ptr)
 {
 	/*
-	 * Try first with a (probably incorrect) assumption about
+	 * Try first with a (possibly incorrect) assumption about
 	 * what we have there. We'll do two loops most likely,
 	 * but we'll get an ownership MESI transaction straight away
 	 * instead of a read transaction followed by a
 	 * flush-for-ownership transaction:
 	 */
-	u64 old_val, new_val, real_val = 1ULL << 32;
+	u64 old_val, new_val, real_val = 0;
 
 	do {
 		old_val = real_val;
-- 
cgit v1.2.3


From ddf9a003d32f720805ac30bcc15755e9289073de Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 3 Jul 2009 20:11:30 +0200
Subject: x86: atomic64: Clean up atomic64_sub_and_test() and
 atomic64_add_negative()

Linus noticed that the variable name 'old_val' is
confusingly named in these functions - the correct
naming is 'new_val'.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <alpine.LFD.2.01.0907030942260.3210@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/atomic64_32.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index a804f96e90e..1d98c9eb6ea 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -175,9 +175,9 @@ EXPORT_SYMBOL(atomic64_sub);
  */
 int atomic64_sub_and_test(u64 delta, atomic64_t *ptr)
 {
-	u64 old_val = atomic64_sub_return(delta, ptr);
+	u64 new_val = atomic64_sub_return(delta, ptr);
 
-	return old_val == 0;
+	return new_val == 0;
 }
 EXPORT_SYMBOL(atomic64_sub_and_test);
 
@@ -244,8 +244,8 @@ EXPORT_SYMBOL(atomic64_inc_and_test);
  */
 int atomic64_add_negative(u64 delta, atomic64_t *ptr)
 {
-	long long old_val = atomic64_add_return(delta, ptr);
+	s64 new_val = atomic64_add_return(delta, ptr);
 
-	return old_val < 0;
+	return new_val < 0;
 }
 EXPORT_SYMBOL(atomic64_add_negative);
-- 
cgit v1.2.3


From 788e5abc5441e9046dd91c995c6f1f75bbd144bf Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:58 +0900
Subject: percpu: drop @unit_size from embed first chunk allocator

The only extra feature @unit_size provides is making dead space at the
end of the first chunk which doesn't have any valid usecase.  Drop the
parameter.  This will increase consistency with generalized 4k
allocator.

James Bottomley spotted missing conversion for the default
setup_per_cpu_areas() which caused build breakage on all arcsh which
use it.

[ Impact: drop unused code path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 29a3eef7cf4..14728206fb5 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -342,7 +342,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE, -1);
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE);
 }
 
 /*
-- 
cgit v1.2.3


From d4b95f80399471e4bce5e992700ff7f06ef91f6a Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:59 +0900
Subject: x86,percpu: generalize 4k first chunk allocator

Generalize and move x86 setup_pcpu_4k() into pcpu_4k_first_chunk().
setup_pcpu_4k() now is a simple wrapper around the generalized
version.  Other than taking size parameters and using arch supplied
callbacks to allocate/free memory, pcpu_4k_first_chunk() is identical
to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, s/pcpu_populate_pte_fn_t/pcpu_fc_populate_pte_fn_t/ for
consistency.

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 78 ++++++++++--------------------------------
 1 file changed, 19 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 14728206fb5..ab896b31e80 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -123,6 +123,19 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
+/*
+ * Helpers for first chunk memory allocation
+ */
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size)
+{
+	return pcpu_alloc_bootmem(cpu, size, size);
+}
+
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+	free_bootmem(__pa(ptr), size);
+}
+
 /*
  * Large page remap allocator
  *
@@ -346,22 +359,11 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 }
 
 /*
- * 4k page allocator
+ * 4k allocator
  *
- * This is the basic allocator.  Static percpu area is allocated
- * page-by-page and most of initialization is done by the generic
- * setup function.
+ * Boring fallback 4k allocator.  This allocator puts more pressure on
+ * PTE TLBs but other than that behaves nicely on both UMA and NUMA.
  */
-static struct page **pcpu4k_pages __initdata;
-static int pcpu4k_nr_static_pages __initdata;
-
-static struct page * __init pcpu4k_get_page(unsigned int cpu, int pageno)
-{
-	if (pageno < pcpu4k_nr_static_pages)
-		return pcpu4k_pages[cpu * pcpu4k_nr_static_pages + pageno];
-	return NULL;
-}
-
 static void __init pcpu4k_populate_pte(unsigned long addr)
 {
 	populate_extra_pte(addr);
@@ -369,51 +371,9 @@ static void __init pcpu4k_populate_pte(unsigned long addr)
 
 static ssize_t __init setup_pcpu_4k(size_t static_size)
 {
-	size_t pages_size;
-	unsigned int cpu;
-	int i, j;
-	ssize_t ret;
-
-	pcpu4k_nr_static_pages = PFN_UP(static_size);
-
-	/* unaligned allocations can't be freed, round up to page size */
-	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
-			       * sizeof(pcpu4k_pages[0]));
-	pcpu4k_pages = alloc_bootmem(pages_size);
-
-	/* allocate and copy */
-	j = 0;
-	for_each_possible_cpu(cpu)
-		for (i = 0; i < pcpu4k_nr_static_pages; i++) {
-			void *ptr;
-
-			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
-			if (!ptr) {
-				pr_warning("PERCPU: failed to allocate "
-					   "4k page for cpu%u\n", cpu);
-				goto enomem;
-			}
-
-			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
-			pcpu4k_pages[j++] = virt_to_page(ptr);
-		}
-
-	/* we're ready, commit */
-	pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n",
-		pcpu4k_nr_static_pages, static_size);
-
-	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size,
-				     PERCPU_FIRST_CHUNK_RESERVE, -1,
-				     -1, NULL, pcpu4k_populate_pte);
-	goto out_free_ar;
-
-enomem:
-	while (--j >= 0)
-		free_bootmem(__pa(page_address(pcpu4k_pages[j])), PAGE_SIZE);
-	ret = -ENOMEM;
-out_free_ar:
-	free_bootmem(__pa(pcpu4k_pages), pages_size);
-	return ret;
+	return pcpu_4k_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				   pcpu_fc_alloc, pcpu_fc_free,
+				   pcpu4k_populate_pte);
 }
 
 /* for explicit first chunk allocator selection */
-- 
cgit v1.2.3


From 8c4bfc6e8801616ab2e01c38140b2159b388d2ff Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:59 +0900
Subject: x86,percpu: generalize lpage first chunk allocator

Generalize and move x86 setup_pcpu_lpage() into
pcpu_lpage_first_chunk().  setup_pcpu_lpage() now is a simple wrapper
around the generalized version.  Other than taking size parameters and
using arch supplied callbacks to allocate/free/map memory,
pcpu_lpage_first_chunk() is identical to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, factor out pcpu_calc_fc_sizes() which is common to
pcpu_embed_first_chunk() and pcpu_lpage_first_chunk().

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h  |   9 ---
 arch/x86/kernel/setup_percpu.c | 169 +++--------------------------------------
 arch/x86/mm/pageattr.c         |   1 +
 3 files changed, 12 insertions(+), 167 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 103f1ddb0d8..a18c038a307 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -156,15 +156,6 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-void *pcpu_lpage_remapped(void *kaddr);
-#else
-static inline void *pcpu_lpage_remapped(void *kaddr)
-{
-	return NULL;
-}
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index ab896b31e80..4f2e0ac9130 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -137,44 +137,21 @@ static void __init pcpu_fc_free(void *ptr, size_t size)
 }
 
 /*
- * Large page remap allocator
- *
- * This allocator uses PMD page as unit.  A PMD page is allocated for
- * each cpu and each is remapped into vmalloc area using PMD mapping.
- * As PMD page is quite large, only part of it is used for the first
- * chunk.  Unused part is returned to the bootmem allocator.
- *
- * So, the PMD pages are mapped twice - once to the physical mapping
- * and to the vmalloc area for the first percpu chunk.  The double
- * mapping does add one more PMD TLB entry pressure but still is much
- * better than only using 4k mappings while still being NUMA friendly.
+ * Large page remapping allocator
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-struct pcpul_ent {
-	unsigned int	cpu;
-	void		*ptr;
-};
-
-static size_t pcpul_size;
-static struct pcpul_ent *pcpul_map;
-static struct vm_struct pcpul_vm;
-
-static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
+static void __init pcpul_map(void *ptr, size_t size, void *addr)
 {
-	size_t off = (size_t)pageno << PAGE_SHIFT;
+	pmd_t *pmd, pmd_v;
 
-	if (off >= pcpul_size)
-		return NULL;
-
-	return virt_to_page(pcpul_map[cpu].ptr + off);
+	pmd = populate_extra_pmd((unsigned long)addr);
+	pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE);
+	set_pmd(pmd, pmd_v);
 }
 
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
-	size_t map_size, dyn_size;
-	unsigned int cpu;
-	int i, j;
-	ssize_t ret;
+	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
@@ -198,134 +175,10 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 		return -EINVAL;
 	}
 
-	/*
-	 * Currently supports only single page.  Supporting multiple
-	 * pages won't be too difficult if it ever becomes necessary.
-	 */
-	pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
-			       PERCPU_DYNAMIC_RESERVE);
-	if (pcpul_size > PMD_SIZE) {
-		pr_warning("PERCPU: static data is larger than large page, "
-			   "can't use large page\n");
-		return -EINVAL;
-	}
-	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
-
-	/* allocate pointer array and alloc large pages */
-	map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
-	pcpul_map = alloc_bootmem(map_size);
-
-	for_each_possible_cpu(cpu) {
-		pcpul_map[cpu].cpu = cpu;
-		pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
-							PMD_SIZE);
-		if (!pcpul_map[cpu].ptr) {
-			pr_warning("PERCPU: failed to allocate large page "
-				   "for cpu%u\n", cpu);
-			goto enomem;
-		}
-
-		/*
-		 * Only use pcpul_size bytes and give back the rest.
-		 *
-		 * Ingo: The 2MB up-rounding bootmem is needed to make
-		 * sure the partial 2MB page is still fully RAM - it's
-		 * not well-specified to have a PAT-incompatible area
-		 * (unmapped RAM, device memory, etc.) in that hole.
-		 */
-		free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
-			     PMD_SIZE - pcpul_size);
-
-		memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
-	}
-
-	/* allocate address and map */
-	pcpul_vm.flags = VM_ALLOC;
-	pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
-	vm_area_register_early(&pcpul_vm, PMD_SIZE);
-
-	for_each_possible_cpu(cpu) {
-		pmd_t *pmd, pmd_v;
-
-		pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
-					 cpu * PMD_SIZE);
-		pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
-				PAGE_KERNEL_LARGE);
-		set_pmd(pmd, pmd_v);
-	}
-
-	/* we're ready, commit */
-	pr_info("PERCPU: Remapped at %p with large pages, static data "
-		"%zu bytes\n", pcpul_vm.addr, static_size);
-
-	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
-				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     PMD_SIZE, pcpul_vm.addr, NULL);
-
-	/* sort pcpul_map array for pcpu_lpage_remapped() */
-	for (i = 0; i < num_possible_cpus() - 1; i++)
-		for (j = i + 1; j < num_possible_cpus(); j++)
-			if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
-				struct pcpul_ent tmp = pcpul_map[i];
-				pcpul_map[i] = pcpul_map[j];
-				pcpul_map[j] = tmp;
-			}
-
-	return ret;
-
-enomem:
-	for_each_possible_cpu(cpu)
-		if (pcpul_map[cpu].ptr)
-			free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
-	free_bootmem(__pa(pcpul_map), map_size);
-	return -ENOMEM;
-}
-
-/**
- * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
- * @kaddr: the kernel address in question
- *
- * Determine whether @kaddr falls in the pcpul recycled area.  This is
- * used by pageattr to detect VM aliases and break up the pcpu PMD
- * mapping such that the same physical page is not mapped under
- * different attributes.
- *
- * The recycled area is always at the tail of a partially used PMD
- * page.
- *
- * RETURNS:
- * Address of corresponding remapped pcpu address if match is found;
- * otherwise, NULL.
- */
-void *pcpu_lpage_remapped(void *kaddr)
-{
-	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
-	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
-	int left = 0, right = num_possible_cpus() - 1;
-	int pos;
-
-	/* pcpul in use at all? */
-	if (!pcpul_map)
-		return NULL;
-
-	/* okay, perform binary search */
-	while (left <= right) {
-		pos = (left + right) / 2;
-
-		if (pcpul_map[pos].ptr < pmd_addr)
-			left = pos + 1;
-		else if (pcpul_map[pos].ptr > pmd_addr)
-			right = pos - 1;
-		else {
-			/* it shouldn't be in the area for the first chunk */
-			WARN_ON(offset < pcpul_size);
-
-			return pcpul_vm.addr +
-				pcpul_map[pos].cpu * PMD_SIZE + offset;
-		}
-	}
-
-	return NULL;
+	return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
+				      PMD_SIZE,
+				      pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
 }
 #else
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1b734d7a896..c106f785242 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -12,6 +12,7 @@
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/pfn.h>
+#include <linux/percpu.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
-- 
cgit v1.2.3


From 38a6be525460f52ac6f2de1c3f73c5615a8853cd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:59 +0900
Subject: percpu: simplify pcpu_setup_first_chunk()

Now that all first chunk allocator helpers allocate and map the first
chunk themselves, there's no need to have optional default alloc/map
in pcpu_setup_first_chunk().  Drop @populate_pte_fn and only leave
@dyn_size optional and make all other params mandatory.

This makes it much easier to follow what pcpu_setup_first_chunk() is
doing and what actual differences tweaking each parameter results in.

[ Impact: drop unused code path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/smp_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index fa44eaf8d89..ccad7b20ae7 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1528,7 +1528,7 @@ void __init setup_per_cpu_areas(void)
 
 	pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size,
 						PERCPU_MODULE_RESERVE, dyn_size,
-						PCPU_CHUNK_SIZE, vm.addr, NULL);
+						PCPU_CHUNK_SIZE, vm.addr);
 
 	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
 
-- 
cgit v1.2.3


From ce3141a277ff6cc37e51008b8888dc2cb7456ef1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:11:00 +0900
Subject: percpu: drop pcpu_chunk->page[]

percpu core doesn't need to tack all the allocated pages.  It needs to
know whether certain pages are populated and a way to reverse map
address to page when freeing.  This patch drops pcpu_chunk->page[] and
use populated bitmap and vmalloc_to_page() lookup instead.  Using
vmalloc_to_page() exclusively is also possible but complicates first
chunk handling, inflates cache footprint and prevents non-standard
memory allocation for percpu memory.

pcpu_chunk->page[] was used to track each page's allocation and
allowed asymmetric population which happens during failure path;
however, with single bitmap for all units, this is no longer possible.
Bite the bullet and rewrite (de)populate functions so that things are
done in clearly separated steps such that asymmetric population
doesn't happen.  This makes the (de)population process much more
modular and will also ease implementing non-standard memory usage in
the future (e.g. large pages).

This makes @get_page_fn parameter to pcpu_setup_first_chunk()
unnecessary.  The parameter is dropped and all first chunk helpers are
updated accordingly.  Please note that despite the volume most changes
to first chunk helpers are symbol renames for variables which don't
need to be referenced outside of the helper anymore.

This change reduces memory usage and cache footprint of pcpu_chunk.
Now only #unit_pages bits are necessary per chunk.

[ Impact: reduced memory usage and cache footprint for bookkeeping ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c | 42 +++++++++++++++---------------------------
 1 file changed, 15 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index ccad7b20ae7..f2f22ee97a7 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1415,19 +1415,6 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
-
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
-{
-	size_t off = (size_t)pageno << PAGE_SHIFT;
-
-	if (off >= pcpur_size)
-		return NULL;
-
-	return virt_to_page(pcpur_ptrs[cpu] + off);
-}
-
 #define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL)
 
 static void __init pcpu_map_range(unsigned long start, unsigned long end,
@@ -1491,25 +1478,26 @@ void __init setup_per_cpu_areas(void)
 	size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start;
 	static struct vm_struct vm;
 	unsigned long delta, cpu;
-	size_t pcpu_unit_size;
+	size_t size_sum, pcpu_unit_size;
 	size_t ptrs_size;
+	void **ptrs;
 
-	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
-			       PERCPU_DYNAMIC_RESERVE);
-	dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
+	size_sum = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+			     PERCPU_DYNAMIC_RESERVE);
+	dyn_size = size_sum - static_size - PERCPU_MODULE_RESERVE;
 
 
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
-	pcpur_ptrs = alloc_bootmem(ptrs_size);
+	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(ptrs[0]));
+	ptrs = alloc_bootmem(ptrs_size);
 
 	for_each_possible_cpu(cpu) {
-		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
-						     PCPU_CHUNK_SIZE);
+		ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
+					       PCPU_CHUNK_SIZE);
 
-		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
-			     PCPU_CHUNK_SIZE - pcpur_size);
+		free_bootmem(__pa(ptrs[cpu] + size_sum),
+			     PCPU_CHUNK_SIZE - size_sum);
 
-		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(ptrs[cpu], __per_cpu_load, static_size);
 	}
 
 	/* allocate address and map */
@@ -1523,14 +1511,14 @@ void __init setup_per_cpu_areas(void)
 
 		start += cpu * PCPU_CHUNK_SIZE;
 		end = start + PCPU_CHUNK_SIZE;
-		pcpu_map_range(start, end, virt_to_page(pcpur_ptrs[cpu]));
+		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
 	}
 
-	pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+	pcpu_unit_size = pcpu_setup_first_chunk(static_size,
 						PERCPU_MODULE_RESERVE, dyn_size,
 						PCPU_CHUNK_SIZE, vm.addr);
 
-	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+	free_bootmem(__pa(ptrs), ptrs_size);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu) {
-- 
cgit v1.2.3


From 2f39e637ea240efb74cf807d31c93a71a0b89174 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:11:00 +0900
Subject: percpu: allow non-linear / sparse cpu -> unit mapping

Currently cpu and unit are always identity mapped.  To allow more
efficient large page support on NUMA and lazy allocation for possible
but offline cpus, cpu -> unit mapping needs to be non-linear and/or
sparse.  This can be easily implemented by adding a cpu -> unit
mapping array and using it whenever looking up the matching unit for a
cpu.

The only unusal conversion is in pcpu_chunk_addr_search().  The passed
in address is unit0 based and unit0 might not be in use so it needs to
be converted to address of an in-use unit.  This is easily done by
adding the unit offset for the current processor.

[ Impact: allows non-linear/sparse cpu -> unit mapping, no visible change yet ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index f2f22ee97a7..6970333b48b 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1516,7 +1516,7 @@ void __init setup_per_cpu_areas(void)
 
 	pcpu_unit_size = pcpu_setup_first_chunk(static_size,
 						PERCPU_MODULE_RESERVE, dyn_size,
-						PCPU_CHUNK_SIZE, vm.addr);
+						PCPU_CHUNK_SIZE, vm.addr, NULL);
 
 	free_bootmem(__pa(ptrs), ptrs_size);
 
-- 
cgit v1.2.3


From a530b7958612bafe2027e21359083dba84f0b3b4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:11:00 +0900
Subject: percpu: teach large page allocator about NUMA

Large page first chunk allocator is primarily used for NUMA machines;
however, its NUMA handling is extremely simplistic.  Regardless of
their proximity, each cpu is put into separate large page just to
return most of the allocated space back wasting large amount of
vmalloc space and increasing cache footprint.

This patch teachs NUMA details to large page allocator.  Given
processor proximity information, pcpu_lpage_build_unit_map() will find
fitting cpu -> unit mapping in which cpus in LOCAL_DISTANCE share the
same large page and not too much virtual address space is wasted.

This greatly reduces the unit and thus chunk size and wastes much less
address space for the first chunk.  For example, on 4/4 NUMA machine,
the original code occupied 16MB of virtual space for the first chunk
while the new code only uses 4MB - one 2MB page for each node.

[ Impact: much better space efficiency on NUMA machines ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>
---
 arch/x86/kernel/setup_percpu.c | 72 ++++++++++++++++++++++++++++++++----------
 1 file changed, 55 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 4f2e0ac9130..7501bb14bd5 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -149,36 +149,73 @@ static void __init pcpul_map(void *ptr, size_t size, void *addr)
 	set_pmd(pmd, pmd_v);
 }
 
+static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
+{
+	if (early_cpu_to_node(from) == early_cpu_to_node(to))
+		return LOCAL_DISTANCE;
+	else
+		return REMOTE_DISTANCE;
+}
+
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
+	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
+	size_t unit_map_size, unit_size;
+	int *unit_map;
+	int nr_units;
+	ssize_t ret;
+
+	/* on non-NUMA, embedding is better */
+	if (!chosen && !pcpu_need_numa())
+		return -EINVAL;
+
+	/* need PSE */
+	if (!cpu_has_pse) {
+		pr_warning("PERCPU: lpage allocator requires PSE\n");
+		return -EINVAL;
+	}
 
+	/* allocate and build unit_map */
+	unit_map_size = num_possible_cpus() * sizeof(int);
+	unit_map = alloc_bootmem_nopanic(unit_map_size);
+	if (!unit_map) {
+		pr_warning("PERCPU: failed to allocate unit_map\n");
+		return -ENOMEM;
+	}
+
+	ret = pcpu_lpage_build_unit_map(static_size,
+					PERCPU_FIRST_CHUNK_RESERVE,
+					&dyn_size, &unit_size, PMD_SIZE,
+					unit_map, pcpu_lpage_cpu_distance);
+	if (ret < 0) {
+		pr_warning("PERCPU: failed to build unit_map\n");
+		goto out_free;
+	}
+	nr_units = ret;
+
+	/* do the parameters look okay? */
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
-		size_t tot_size = num_possible_cpus() * PMD_SIZE;
-
-		/* on non-NUMA, embedding is better */
-		if (!pcpu_need_numa())
-			return -EINVAL;
+		size_t tot_size = nr_units * unit_size;
 
 		/* don't consume more than 20% of vmalloc area */
 		if (tot_size > vm_size / 5) {
 			pr_info("PERCPU: too large chunk size %zuMB for "
 				"large page remap\n", tot_size >> 20);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out_free;
 		}
 	}
 
-	/* need PSE */
-	if (!cpu_has_pse) {
-		pr_warning("PERCPU: lpage allocator requires PSE\n");
-		return -EINVAL;
-	}
-
-	return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
-				      PMD_SIZE,
-				      pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
+	ret = pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				     dyn_size, unit_size, PMD_SIZE,
+				     unit_map, nr_units,
+				     pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
+out_free:
+	if (ret < 0)
+		free_bootmem(__pa(unit_map), unit_map_size);
+	return ret;
 }
 #else
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
@@ -299,7 +336,8 @@ void __init setup_per_cpu_areas(void)
 	/* alrighty, percpu areas up and running */
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu) {
-		per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
+		per_cpu_offset(cpu) =
+			delta + pcpu_unit_map[cpu] * pcpu_unit_size;
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
 		setup_percpu_segment(cpu);
-- 
cgit v1.2.3


From 42204455f160dab0c47f19e1be23f5c927af2d17 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:50:00 +0530
Subject: x86: Clean up mtrr/amd.c:

Fix trivial style problems :

  ERROR: trailing whitespace
  WARNING: line over 80 characters
  ERROR: do not use C99 // comments

arch/x86/kernel/cpu/mtrr/amd.o:

   text	   data	    bss	    dec	    hex	filename
    501	     32	      0	    533	    215	amd.o.before
    501	     32	      0	    533	    215	amd.o.after

md5:
   62f795eb840ee2d17b03df89e789e76c  amd.o.before.asm
   62f795eb840ee2d17b03df89e789e76c  amd.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Also restructured comments to be standard, removed stray return,
  converted function description to DocBook style, etc. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/amd.c | 97 ++++++++++++++++++++++--------------------
 1 file changed, 51 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/amd.c b/arch/x86/kernel/cpu/mtrr/amd.c
index ee2331b0e58..33af14110df 100644
--- a/arch/x86/kernel/cpu/mtrr/amd.c
+++ b/arch/x86/kernel/cpu/mtrr/amd.c
@@ -7,15 +7,15 @@
 
 static void
 amd_get_mtrr(unsigned int reg, unsigned long *base,
-	     unsigned long *size, mtrr_type * type)
+	     unsigned long *size, mtrr_type *type)
 {
 	unsigned long low, high;
 
 	rdmsr(MSR_K6_UWCCR, low, high);
-	/*  Upper dword is region 1, lower is region 0  */
+	/* Upper dword is region 1, lower is region 0 */
 	if (reg == 1)
 		low = high;
-	/*  The base masks off on the right alignment  */
+	/* The base masks off on the right alignment */
 	*base = (low & 0xFFFE0000) >> PAGE_SHIFT;
 	*type = 0;
 	if (low & 1)
@@ -27,74 +27,81 @@ amd_get_mtrr(unsigned int reg, unsigned long *base,
 		return;
 	}
 	/*
-	 *  This needs a little explaining. The size is stored as an
-	 *  inverted mask of bits of 128K granularity 15 bits long offset
-	 *  2 bits
+	 * This needs a little explaining. The size is stored as an
+	 * inverted mask of bits of 128K granularity 15 bits long offset
+	 * 2 bits.
 	 *
-	 *  So to get a size we do invert the mask and add 1 to the lowest
-	 *  mask bit (4 as its 2 bits in). This gives us a size we then shift
-	 *  to turn into 128K blocks
+	 * So to get a size we do invert the mask and add 1 to the lowest
+	 * mask bit (4 as its 2 bits in). This gives us a size we then shift
+	 * to turn into 128K blocks.
 	 *
-	 *  eg              111 1111 1111 1100      is 512K
+	 * eg              111 1111 1111 1100      is 512K
 	 *
-	 *  invert          000 0000 0000 0011
-	 *  +1              000 0000 0000 0100
-	 *  *128K   ...
+	 * invert          000 0000 0000 0011
+	 * +1              000 0000 0000 0100
+	 * *128K   ...
 	 */
 	low = (~low) & 0x1FFFC;
 	*size = (low + 4) << (15 - PAGE_SHIFT);
-	return;
 }
 
-static void amd_set_mtrr(unsigned int reg, unsigned long base,
-			 unsigned long size, mtrr_type type)
-/*  [SUMMARY] Set variable MTRR register on the local CPU.
-    <reg> The register to set.
-    <base> The base address of the region.
-    <size> The size of the region. If this is 0 the region is disabled.
-    <type> The type of the region.
-    [RETURNS] Nothing.
-*/
+/**
+ * amd_set_mtrr - Set variable MTRR register on the local CPU.
+ *
+ * @reg The register to set.
+ * @base The base address of the region.
+ * @size The size of the region. If this is 0 the region is disabled.
+ * @type The type of the region.
+ *
+ * Returns nothing.
+ */
+static void
+amd_set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
 {
 	u32 regs[2];
 
 	/*
-	 *  Low is MTRR0 , High MTRR 1
+	 * Low is MTRR0, High MTRR 1
 	 */
 	rdmsr(MSR_K6_UWCCR, regs[0], regs[1]);
 	/*
-	 *  Blank to disable
+	 * Blank to disable
 	 */
-	if (size == 0)
+	if (size == 0) {
 		regs[reg] = 0;
-	else
-		/* Set the register to the base, the type (off by one) and an
-		   inverted bitmask of the size The size is the only odd
-		   bit. We are fed say 512K We invert this and we get 111 1111
-		   1111 1011 but if you subtract one and invert you get the   
-		   desired 111 1111 1111 1100 mask
-
-		   But ~(x - 1) == ~x + 1 == -x. Two's complement rocks!  */
+	} else {
+		/*
+		 * Set the register to the base, the type (off by one) and an
+		 * inverted bitmask of the size The size is the only odd
+		 * bit. We are fed say 512K We invert this and we get 111 1111
+		 * 1111 1011 but if you subtract one and invert you get the
+		 * desired 111 1111 1111 1100 mask
+		 *
+		 *  But ~(x - 1) == ~x + 1 == -x. Two's complement rocks!
+		 */
 		regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC)
 		    | (base << PAGE_SHIFT) | (type + 1);
+	}
 
 	/*
-	 *  The writeback rule is quite specific. See the manual. Its
-	 *  disable local interrupts, write back the cache, set the mtrr
+	 * The writeback rule is quite specific. See the manual. Its
+	 * disable local interrupts, write back the cache, set the mtrr
 	 */
 	wbinvd();
 	wrmsr(MSR_K6_UWCCR, regs[0], regs[1]);
 }
 
-static int amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+static int
+amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
 {
-	/* Apply the K6 block alignment and size rules
-	   In order
-	   o Uncached or gathering only
-	   o 128K or bigger block
-	   o Power of 2 block
-	   o base suitably aligned to the power
-	*/
+	/*
+	 * Apply the K6 block alignment and size rules
+	 * In order
+	 * o Uncached or gathering only
+	 * o 128K or bigger block
+	 * o Power of 2 block
+	 * o base suitably aligned to the power
+	 */
 	if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT))
 	    || (size & ~(size - 1)) - size || (base & (size - 1)))
 		return -EINVAL;
@@ -115,5 +122,3 @@ int __init amd_init_mtrr(void)
 	set_mtrr_ops(&amd_mtrr_ops);
 	return 0;
 }
-
-//arch_initcall(amd_mtrr_init);
-- 
cgit v1.2.3


From 6c4caa1ab737502190e416b76e6c10d2bf24276a Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:50:44 +0530
Subject: x86: Clean up mtrr/centaur.c

Remove dead code and fix trivial style problems:

  ERROR: trailing whitespace X 2
  WARNING: line over 80 characters X 3
  ROR: trailing whitespace
  ERROR: do not use C99 // comments X 2

arch/x86/kernel/cpu/mtrr/centaur.o:

   text	   data	    bss	    dec	    hex	filename
    605	     32	     68	    705	    2c1	centaur.o.before
    605	     32	     68	    705	    2c1	centaur.o.after

md5:
   a4865ea98ce3c163bb1d376a3949b3e3  centaur.o.before.asm
   a4865ea98ce3c163bb1d376a3949b3e3  centaur.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Standardized comments, DocBook, curly braces, newlines. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/centaur.c | 168 ++++++++-----------------------------
 1 file changed, 35 insertions(+), 133 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/centaur.c b/arch/x86/kernel/cpu/mtrr/centaur.c
index cb9aa3a7a7a..de89f14eff3 100644
--- a/arch/x86/kernel/cpu/mtrr/centaur.c
+++ b/arch/x86/kernel/cpu/mtrr/centaur.c
@@ -1,7 +1,9 @@
 #include <linux/init.h>
 #include <linux/mm.h>
+
 #include <asm/mtrr.h>
 #include <asm/msr.h>
+
 #include "mtrr.h"
 
 static struct {
@@ -12,25 +14,25 @@ static struct {
 static u8 centaur_mcr_reserved;
 static u8 centaur_mcr_type;	/* 0 for winchip, 1 for winchip2 */
 
-/*
- *	Report boot time MCR setups 
+/**
+ * centaur_get_free_region - Get a free MTRR.
+ *
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ *
+ * Returns: the index of the region on success, else -1 on error.
  */
-
 static int
 centaur_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/*  [SUMMARY] Get a free MTRR.
-    <base> The starting (base) address of the region.
-    <size> The size (in bytes) of the region.
-    [RETURNS] The index of the region on success, else -1 on error.
-*/
 {
-	int i, max;
-	mtrr_type ltype;
 	unsigned long lbase, lsize;
+	mtrr_type ltype;
+	int i, max;
 
 	max = num_var_ranges;
 	if (replace_reg >= 0 && replace_reg < max)
 		return replace_reg;
+
 	for (i = 0; i < max; ++i) {
 		if (centaur_mcr_reserved & (1 << i))
 			continue;
@@ -38,11 +40,14 @@ centaur_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 		if (lsize == 0)
 			return i;
 	}
+
 	return -ENOSPC;
 }
 
-void
-mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+/*
+ * Report boot time MCR setups
+ */
+void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
 {
 	centaur_mcr[mcr].low = lo;
 	centaur_mcr[mcr].high = hi;
@@ -54,33 +59,35 @@ centaur_get_mcr(unsigned int reg, unsigned long *base,
 {
 	*base = centaur_mcr[reg].high >> PAGE_SHIFT;
 	*size = -(centaur_mcr[reg].low & 0xfffff000) >> PAGE_SHIFT;
-	*type = MTRR_TYPE_WRCOMB;	/*  If it is there, it is write-combining  */
+	*type = MTRR_TYPE_WRCOMB;		/* write-combining  */
+
 	if (centaur_mcr_type == 1 && ((centaur_mcr[reg].low & 31) & 2))
 		*type = MTRR_TYPE_UNCACHABLE;
 	if (centaur_mcr_type == 1 && (centaur_mcr[reg].low & 31) == 25)
 		*type = MTRR_TYPE_WRBACK;
 	if (centaur_mcr_type == 0 && (centaur_mcr[reg].low & 31) == 31)
 		*type = MTRR_TYPE_WRBACK;
-
 }
 
-static void centaur_set_mcr(unsigned int reg, unsigned long base,
-			    unsigned long size, mtrr_type type)
+static void
+centaur_set_mcr(unsigned int reg, unsigned long base,
+		unsigned long size, mtrr_type type)
 {
 	unsigned long low, high;
 
 	if (size == 0) {
-		/*  Disable  */
+		/* Disable */
 		high = low = 0;
 	} else {
 		high = base << PAGE_SHIFT;
-		if (centaur_mcr_type == 0)
-			low = -size << PAGE_SHIFT | 0x1f;	/* only support write-combining... */
-		else {
+		if (centaur_mcr_type == 0) {
+			/* Only support write-combining... */
+			low = -size << PAGE_SHIFT | 0x1f;
+		} else {
 			if (type == MTRR_TYPE_UNCACHABLE)
-				low = -size << PAGE_SHIFT | 0x02;	/* NC */
+				low = -size << PAGE_SHIFT | 0x02; /* NC */
 			else
-				low = -size << PAGE_SHIFT | 0x09;	/* WWO,WC */
+				low = -size << PAGE_SHIFT | 0x09; /* WWO, WC */
 		}
 	}
 	centaur_mcr[reg].high = high;
@@ -88,118 +95,16 @@ static void centaur_set_mcr(unsigned int reg, unsigned long base,
 	wrmsr(MSR_IDT_MCR0 + reg, low, high);
 }
 
-#if 0
-/*
- *	Initialise the later (saner) Winchip MCR variant. In this version
- *	the BIOS can pass us the registers it has used (but not their values)
- *	and the control register is read/write
- */
-
-static void __init
-centaur_mcr1_init(void)
-{
-	unsigned i;
-	u32 lo, hi;
-
-	/* Unfortunately, MCR's are read-only, so there is no way to
-	 * find out what the bios might have done.
-	 */
-
-	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	if (((lo >> 17) & 7) == 1) {	/* Type 1 Winchip2 MCR */
-		lo &= ~0x1C0;	/* clear key */
-		lo |= 0x040;	/* set key to 1 */
-		wrmsr(MSR_IDT_MCR_CTRL, lo, hi);	/* unlock MCR */
-	}
-
-	centaur_mcr_type = 1;
-
-	/*
-	 *  Clear any unconfigured MCR's.
-	 */
-
-	for (i = 0; i < 8; ++i) {
-		if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) {
-			if (!(lo & (1 << (9 + i))))
-				wrmsr(MSR_IDT_MCR0 + i, 0, 0);
-			else
-				/*
-				 *      If the BIOS set up an MCR we cannot see it
-				 *      but we don't wish to obliterate it
-				 */
-				centaur_mcr_reserved |= (1 << i);
-		}
-	}
-	/*  
-	 *  Throw the main write-combining switch... 
-	 *  However if OOSTORE is enabled then people have already done far
-	 *  cleverer things and we should behave. 
-	 */
-
-	lo |= 15;		/* Write combine enables */
-	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-}
-
-/*
- *	Initialise the original winchip with read only MCR registers
- *	no used bitmask for the BIOS to pass on and write only control
- */
-
-static void __init
-centaur_mcr0_init(void)
-{
-	unsigned i;
-
-	/* Unfortunately, MCR's are read-only, so there is no way to
-	 * find out what the bios might have done.
-	 */
-
-	/* Clear any unconfigured MCR's.
-	 * This way we are sure that the centaur_mcr array contains the actual
-	 * values. The disadvantage is that any BIOS tweaks are thus undone.
-	 *
-	 */
-	for (i = 0; i < 8; ++i) {
-		if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0)
-			wrmsr(MSR_IDT_MCR0 + i, 0, 0);
-	}
-
-	wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);	/* Write only */
-}
-
-/*
- *	Initialise Winchip series MCR registers
- */
-
-static void __init
-centaur_mcr_init(void)
-{
-	struct set_mtrr_context ctxt;
-
-	set_mtrr_prepare_save(&ctxt);
-	set_mtrr_cache_disable(&ctxt);
-
-	if (boot_cpu_data.x86_model == 4)
-		centaur_mcr0_init();
-	else if (boot_cpu_data.x86_model == 8 || boot_cpu_data.x86_model == 9)
-		centaur_mcr1_init();
-
-	set_mtrr_done(&ctxt);
-}
-#endif
-
-static int centaur_validate_add_page(unsigned long base, 
-				     unsigned long size, unsigned int type)
+static int
+centaur_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
 {
 	/*
-	 *  FIXME: Winchip2 supports uncached
+	 * FIXME: Winchip2 supports uncached
 	 */
-	if (type != MTRR_TYPE_WRCOMB && 
+	if (type != MTRR_TYPE_WRCOMB &&
 	    (centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) {
-		printk(KERN_WARNING
-		       "mtrr: only write-combining%s supported\n",
-		       centaur_mcr_type ? " and uncacheable are"
-		       : " is");
+		pr_warning("mtrr: only write-combining%s supported\n",
+			   centaur_mcr_type ? " and uncacheable are" : " is");
 		return -EINVAL;
 	}
 	return 0;
@@ -207,7 +112,6 @@ static int centaur_validate_add_page(unsigned long base,
 
 static struct mtrr_ops centaur_mtrr_ops = {
 	.vendor            = X86_VENDOR_CENTAUR,
-//	.init              = centaur_mcr_init,
 	.set               = centaur_set_mcr,
 	.get               = centaur_get_mcr,
 	.get_free_region   = centaur_get_free_region,
@@ -220,5 +124,3 @@ int __init centaur_init_mtrr(void)
 	set_mtrr_ops(&centaur_mtrr_ops);
 	return 0;
 }
-
-//arch_initcall(centaur_init_mtrr);
-- 
cgit v1.2.3


From 63f9600fadb10ea739108ae93e3e842d9843c58b Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:51:32 +0530
Subject: x86: Clean up mtrr/cleanup.c

Fix trivial style problems:

  WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
  WARNING: Use #include <linux/kvm_para.h> instead of <asm/kvm_para.h>

Also, nr_mtrr_spare_reg should be unsigned long.

arch/x86/kernel/cpu/mtrr/cleanup.o:

   text	   data	    bss	    dec	    hex	filename
   6241	   8992	   2056	  17289	   4389	cleanup.o.before
   6241	   8992	   2056	  17289	   4389	cleanup.o.after

The md5 has changed:
   1a7a27513aef1825236daf29110fe657  cleanup.o.before.asm
   bcea358efa2532b6020e338e158447af  cleanup.o.after.asm

Because a WARN_ON()'s __LINE__ value changed by 3 lines.

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Did lots of other cleanups to make the code look more consistent. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/cleanup.c | 350 +++++++++++++++++++------------------
 1 file changed, 176 insertions(+), 174 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 1d584a18a50..b8aba811b60 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -1,51 +1,52 @@
-/*  MTRR (Memory Type Range Register) cleanup
-
-    Copyright (C) 2009 Yinghai Lu
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Library General Public
-    License as published by the Free Software Foundation; either
-    version 2 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Library General Public License for more details.
-
-    You should have received a copy of the GNU Library General Public
-    License along with this library; if not, write to the Free
-    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
+/*
+ * MTRR (Memory Type Range Register) cleanup
+ *
+ *  Copyright (C) 2009 Yinghai Lu
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
 #include <linux/cpu.h>
-#include <linux/mutex.h>
 #include <linux/sort.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/kvm_para.h>
 
+#include <asm/processor.h>
 #include <asm/e820.h>
 #include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/kvm_para.h>
+
 #include "mtrr.h"
 
-/* should be related to MTRR_VAR_RANGES nums */
+/* Should be related to MTRR_VAR_RANGES nums */
 #define RANGE_NUM 256
 
 struct res_range {
-	unsigned long start;
-	unsigned long end;
+	unsigned long	start;
+	unsigned long	end;
 };
 
 static int __init
-add_range(struct res_range *range, int nr_range, unsigned long start,
-			      unsigned long end)
+add_range(struct res_range *range, int nr_range,
+	  unsigned long start, unsigned long end)
 {
-	/* out of slots */
+	/* Out of slots: */
 	if (nr_range >= RANGE_NUM)
 		return nr_range;
 
@@ -58,12 +59,12 @@ add_range(struct res_range *range, int nr_range, unsigned long start,
 }
 
 static int __init
-add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
-			      unsigned long end)
+add_range_with_merge(struct res_range *range, int nr_range,
+		     unsigned long start, unsigned long end)
 {
 	int i;
 
-	/* try to merge it with old one */
+	/* Try to merge it with old one: */
 	for (i = 0; i < nr_range; i++) {
 		unsigned long final_start, final_end;
 		unsigned long common_start, common_end;
@@ -84,7 +85,7 @@ add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
 		return nr_range;
 	}
 
-	/* need to add that */
+	/* Need to add it: */
 	return add_range(range, nr_range, start, end);
 }
 
@@ -117,7 +118,7 @@ subtract_range(struct res_range *range, unsigned long start, unsigned long end)
 		}
 
 		if (start > range[j].start && end < range[j].end) {
-			/* find the new spare */
+			/* Find the new spare: */
 			for (i = 0; i < RANGE_NUM; i++) {
 				if (range[i].end == 0)
 					break;
@@ -147,13 +148,19 @@ static int __init cmp_range(const void *x1, const void *x2)
 }
 
 struct var_mtrr_range_state {
-	unsigned long base_pfn;
-	unsigned long size_pfn;
-	mtrr_type type;
+	unsigned long	base_pfn;
+	unsigned long	size_pfn;
+	mtrr_type	type;
 };
 
 static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+
 static int __initdata debug_print;
+#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
+
+
+#define BIOS_BUG_MSG KERN_WARNING \
+	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
 static int __init
 x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
@@ -180,7 +187,7 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 				 range[i].start, range[i].end + 1);
 	}
 
-	/* take out UC ranges */
+	/* Take out UC ranges: */
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
 		if (type != MTRR_TYPE_UNCACHABLE &&
@@ -244,10 +251,9 @@ static int __initdata nr_range;
 
 static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
 {
-	unsigned long sum;
+	unsigned long sum = 0;
 	int i;
 
-	sum = 0;
 	for (i = 0; i < nr_range; i++)
 		sum += range[i].end + 1 - range[i].start;
 
@@ -288,7 +294,7 @@ struct var_mtrr_state {
 
 static void __init
 set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
-		unsigned char type, unsigned int address_bits)
+	     unsigned char type, unsigned int address_bits)
 {
 	u32 base_lo, base_hi, mask_lo, mask_hi;
 	u64 base, mask;
@@ -301,7 +307,7 @@ set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
 	mask = (1ULL << address_bits) - 1;
 	mask &= ~((((u64)sizek) << 10) - 1);
 
-	base  = ((u64)basek) << 10;
+	base = ((u64)basek) << 10;
 
 	base |= type;
 	mask |= 0x800;
@@ -317,15 +323,14 @@ set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
 
 static void __init
 save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
-		unsigned char type)
+	      unsigned char type)
 {
 	range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10);
 	range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10);
 	range_state[reg].type = type;
 }
 
-static void __init
-set_var_mtrr_all(unsigned int address_bits)
+static void __init set_var_mtrr_all(unsigned int address_bits)
 {
 	unsigned long basek, sizek;
 	unsigned char type;
@@ -342,11 +347,11 @@ set_var_mtrr_all(unsigned int address_bits)
 
 static unsigned long to_size_factor(unsigned long sizek, char *factorp)
 {
-	char factor;
 	unsigned long base = sizek;
+	char factor;
 
 	if (base & ((1<<10) - 1)) {
-		/* not MB alignment */
+		/* Not MB-aligned: */
 		factor = 'K';
 	} else if (base & ((1<<20) - 1)) {
 		factor = 'M';
@@ -372,11 +377,12 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk,
 		unsigned long max_align, align;
 		unsigned long sizek;
 
-		/* Compute the maximum size I can make a range */
+		/* Compute the maximum size with which we can make a range: */
 		if (range_startk)
 			max_align = ffs(range_startk) - 1;
 		else
 			max_align = 32;
+
 		align = fls(range_sizek) - 1;
 		if (align > max_align)
 			align = max_align;
@@ -386,11 +392,10 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk,
 			char start_factor = 'K', size_factor = 'K';
 			unsigned long start_base, size_base;
 
-			start_base = to_size_factor(range_startk,
-							 &start_factor),
-			size_base = to_size_factor(sizek, &size_factor),
+			start_base = to_size_factor(range_startk, &start_factor);
+			size_base = to_size_factor(sizek, &size_factor);
 
-			printk(KERN_DEBUG "Setting variable MTRR %d, "
+			Dprintk("Setting variable MTRR %d, "
 				"base: %ld%cB, range: %ld%cB, type %s\n",
 				reg, start_base, start_factor,
 				size_base, size_factor,
@@ -425,10 +430,11 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 	chunk_sizek = state->chunk_sizek;
 	gran_sizek = state->gran_sizek;
 
-	/* align with gran size, prevent small block used up MTRRs */
+	/* Align with gran size, prevent small block used up MTRRs: */
 	range_basek = ALIGN(state->range_startk, gran_sizek);
 	if ((range_basek > basek) && basek)
 		return second_sizek;
+
 	state->range_sizek -= (range_basek - state->range_startk);
 	range_sizek = ALIGN(state->range_sizek, gran_sizek);
 
@@ -439,22 +445,21 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 	}
 	state->range_sizek = range_sizek;
 
-	/* try to append some small hole */
+	/* Try to append some small hole: */
 	range0_basek = state->range_startk;
 	range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
 
-	/* no increase */
+	/* No increase: */
 	if (range0_sizek == state->range_sizek) {
-		if (debug_print)
-			printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
-				range0_basek<<10,
-				(range0_basek + state->range_sizek)<<10);
+		Dprintk("rangeX: %016lx - %016lx\n",
+			range0_basek<<10,
+			(range0_basek + state->range_sizek)<<10);
 		state->reg = range_to_mtrr(state->reg, range0_basek,
 				state->range_sizek, MTRR_TYPE_WRBACK);
 		return 0;
 	}
 
-	/* only cut back, when it is not the last */
+	/* Only cut back when it is not the last: */
 	if (sizek) {
 		while (range0_basek + range0_sizek > (basek + sizek)) {
 			if (range0_sizek >= chunk_sizek)
@@ -470,16 +475,16 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 second_try:
 	range_basek = range0_basek + range0_sizek;
 
-	/* one hole in the middle */
+	/* One hole in the middle: */
 	if (range_basek > basek && range_basek <= (basek + sizek))
 		second_sizek = range_basek - basek;
 
 	if (range0_sizek > state->range_sizek) {
 
-		/* one hole in middle or at end */
+		/* One hole in middle or at the end: */
 		hole_sizek = range0_sizek - state->range_sizek - second_sizek;
 
-		/* hole size should be less than half of range0 size */
+		/* Hole size should be less than half of range0 size: */
 		if (hole_sizek >= (range0_sizek >> 1) &&
 		    range0_sizek >= chunk_sizek) {
 			range0_sizek -= chunk_sizek;
@@ -491,32 +496,30 @@ second_try:
 	}
 
 	if (range0_sizek) {
-		if (debug_print)
-			printk(KERN_DEBUG "range0: %016lx - %016lx\n",
-				range0_basek<<10,
-				(range0_basek + range0_sizek)<<10);
+		Dprintk("range0: %016lx - %016lx\n",
+			range0_basek<<10,
+			(range0_basek + range0_sizek)<<10);
 		state->reg = range_to_mtrr(state->reg, range0_basek,
 				range0_sizek, MTRR_TYPE_WRBACK);
 	}
 
 	if (range0_sizek < state->range_sizek) {
-		/* need to handle left over */
+		/* Need to handle left over range: */
 		range_sizek = state->range_sizek - range0_sizek;
 
-		if (debug_print)
-			printk(KERN_DEBUG "range: %016lx - %016lx\n",
-				 range_basek<<10,
-				 (range_basek + range_sizek)<<10);
+		Dprintk("range: %016lx - %016lx\n",
+			 range_basek<<10,
+			 (range_basek + range_sizek)<<10);
+
 		state->reg = range_to_mtrr(state->reg, range_basek,
 				 range_sizek, MTRR_TYPE_WRBACK);
 	}
 
 	if (hole_sizek) {
 		hole_basek = range_basek - hole_sizek - second_sizek;
-		if (debug_print)
-			printk(KERN_DEBUG "hole: %016lx - %016lx\n",
-				 hole_basek<<10,
-				 (hole_basek + hole_sizek)<<10);
+		Dprintk("hole: %016lx - %016lx\n",
+			 hole_basek<<10,
+			 (hole_basek + hole_sizek)<<10);
 		state->reg = range_to_mtrr(state->reg, hole_basek,
 				 hole_sizek, MTRR_TYPE_UNCACHABLE);
 	}
@@ -537,23 +540,23 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn,
 	basek = base_pfn << (PAGE_SHIFT - 10);
 	sizek = size_pfn << (PAGE_SHIFT - 10);
 
-	/* See if I can merge with the last range */
+	/* See if I can merge with the last range: */
 	if ((basek <= 1024) ||
 	    (state->range_startk + state->range_sizek == basek)) {
 		unsigned long endk = basek + sizek;
 		state->range_sizek = endk - state->range_startk;
 		return;
 	}
-	/* Write the range mtrrs */
+	/* Write the range mtrrs: */
 	if (state->range_sizek != 0)
 		second_sizek = range_to_mtrr_with_hole(state, basek, sizek);
 
-	/* Allocate an msr */
+	/* Allocate an msr: */
 	state->range_startk = basek + second_sizek;
 	state->range_sizek  = sizek - second_sizek;
 }
 
-/* mininum size of mtrr block that can take hole */
+/* Mininum size of mtrr block that can take hole: */
 static u64 mtrr_chunk_size __initdata = (256ULL<<20);
 
 static int __init parse_mtrr_chunk_size_opt(char *p)
@@ -565,7 +568,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p)
 }
 early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt);
 
-/* granity of mtrr of block */
+/* Granularity of mtrr of block: */
 static u64 mtrr_gran_size __initdata;
 
 static int __init parse_mtrr_gran_size_opt(char *p)
@@ -577,7 +580,7 @@ static int __init parse_mtrr_gran_size_opt(char *p)
 }
 early_param("mtrr_gran_size", parse_mtrr_gran_size_opt);
 
-static int nr_mtrr_spare_reg __initdata =
+static unsigned long nr_mtrr_spare_reg __initdata =
 				 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT;
 
 static int __init parse_mtrr_spare_reg(char *arg)
@@ -586,7 +589,6 @@ static int __init parse_mtrr_spare_reg(char *arg)
 		nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0);
 	return 0;
 }
-
 early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg);
 
 static int __init
@@ -594,8 +596,8 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range,
 		    u64 chunk_size, u64 gran_size)
 {
 	struct var_mtrr_state var_state;
-	int i;
 	int num_reg;
+	int i;
 
 	var_state.range_startk	= 0;
 	var_state.range_sizek	= 0;
@@ -605,17 +607,18 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range,
 
 	memset(range_state, 0, sizeof(range_state));
 
-	/* Write the range etc */
-	for (i = 0; i < nr_range; i++)
+	/* Write the range: */
+	for (i = 0; i < nr_range; i++) {
 		set_var_mtrr_range(&var_state, range[i].start,
 				   range[i].end - range[i].start + 1);
+	}
 
-	/* Write the last range */
+	/* Write the last range: */
 	if (var_state.range_sizek != 0)
 		range_to_mtrr_with_hole(&var_state, 0, 0);
 
 	num_reg = var_state.reg;
-	/* Clear out the extra MTRR's */
+	/* Clear out the extra MTRR's: */
 	while (var_state.reg < num_var_ranges) {
 		save_var_mtrr(var_state.reg, 0, 0, 0);
 		var_state.reg++;
@@ -625,11 +628,11 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range,
 }
 
 struct mtrr_cleanup_result {
-	unsigned long gran_sizek;
-	unsigned long chunk_sizek;
-	unsigned long lose_cover_sizek;
-	unsigned int num_reg;
-	int bad;
+	unsigned long	gran_sizek;
+	unsigned long	chunk_sizek;
+	unsigned long	lose_cover_sizek;
+	unsigned int	num_reg;
+	int		bad;
 };
 
 /*
@@ -645,10 +648,10 @@ static unsigned long __initdata min_loss_pfn[RANGE_NUM];
 
 static void __init print_out_mtrr_range_state(void)
 {
-	int i;
 	char start_factor = 'K', size_factor = 'K';
 	unsigned long start_base, size_base;
 	mtrr_type type;
+	int i;
 
 	for (i = 0; i < num_var_ranges; i++) {
 
@@ -676,10 +679,10 @@ static int __init mtrr_need_cleanup(void)
 	int i;
 	mtrr_type type;
 	unsigned long size;
-	/* extra one for all 0 */
+	/* Extra one for all 0: */
 	int num[MTRR_NUM_TYPES + 1];
 
-	/* check entries number */
+	/* Check entries number: */
 	memset(num, 0, sizeof(num));
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
@@ -693,88 +696,86 @@ static int __init mtrr_need_cleanup(void)
 		num[type]++;
 	}
 
-	/* check if we got UC entries */
+	/* Check if we got UC entries: */
 	if (!num[MTRR_TYPE_UNCACHABLE])
 		return 0;
 
-	/* check if we only had WB and UC */
+	/* Check if we only had WB and UC */
 	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
-		num_var_ranges - num[MTRR_NUM_TYPES])
+	    num_var_ranges - num[MTRR_NUM_TYPES])
 		return 0;
 
 	return 1;
 }
 
 static unsigned long __initdata range_sums;
-static void __init mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
-					 unsigned long extra_remove_base,
-					 unsigned long extra_remove_size,
-					 int i)
+
+static void __init
+mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
+		      unsigned long x_remove_base,
+		      unsigned long x_remove_size, int i)
 {
-	int num_reg;
 	static struct res_range range_new[RANGE_NUM];
-	static int nr_range_new;
 	unsigned long range_sums_new;
+	static int nr_range_new;
+	int num_reg;
 
-	/* convert ranges to var ranges state */
-	num_reg = x86_setup_var_mtrrs(range, nr_range,
-						chunk_size, gran_size);
+	/* Convert ranges to var ranges state: */
+	num_reg = x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
 
-	/* we got new setting in range_state, check it */
+	/* We got new setting in range_state, check it: */
 	memset(range_new, 0, sizeof(range_new));
 	nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
-				extra_remove_base, extra_remove_size);
+				x_remove_base, x_remove_size);
 	range_sums_new = sum_ranges(range_new, nr_range_new);
 
 	result[i].chunk_sizek = chunk_size >> 10;
 	result[i].gran_sizek = gran_size >> 10;
 	result[i].num_reg = num_reg;
+
 	if (range_sums < range_sums_new) {
-		result[i].lose_cover_sizek =
-			(range_sums_new - range_sums) << PSHIFT;
+		result[i].lose_cover_sizek = (range_sums_new - range_sums) << PSHIFT;
 		result[i].bad = 1;
-	} else
-		result[i].lose_cover_sizek =
-			(range_sums - range_sums_new) << PSHIFT;
+	} else {
+		result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT;
+	}
 
-	/* double check it */
+	/* Double check it: */
 	if (!result[i].bad && !result[i].lose_cover_sizek) {
-		if (nr_range_new != nr_range ||
-			memcmp(range, range_new, sizeof(range)))
-				result[i].bad = 1;
+		if (nr_range_new != nr_range || memcmp(range, range_new, sizeof(range)))
+			result[i].bad = 1;
 	}
 
-	if (!result[i].bad && (range_sums - range_sums_new <
-				min_loss_pfn[num_reg])) {
-		min_loss_pfn[num_reg] =
-			range_sums - range_sums_new;
-	}
+	if (!result[i].bad && (range_sums - range_sums_new < min_loss_pfn[num_reg]))
+		min_loss_pfn[num_reg] = range_sums - range_sums_new;
 }
 
 static void __init mtrr_print_out_one_result(int i)
 {
-	char gran_factor, chunk_factor, lose_factor;
 	unsigned long gran_base, chunk_base, lose_base;
+	char gran_factor, chunk_factor, lose_factor;
 
 	gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
 	chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
 	lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
-	printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t",
-			result[i].bad ? "*BAD*" : " ",
-			gran_base, gran_factor, chunk_base, chunk_factor);
-	printk(KERN_CONT "num_reg: %d  \tlose cover RAM: %s%ld%c\n",
-			result[i].num_reg, result[i].bad ? "-" : "",
-			lose_base, lose_factor);
+
+	pr_info("%sgran_size: %ld%c \tchunk_size: %ld%c \t",
+		result[i].bad ? "*BAD*" : " ",
+		gran_base, gran_factor, chunk_base, chunk_factor);
+	pr_cont("num_reg: %d  \tlose cover RAM: %s%ld%c\n",
+		result[i].num_reg, result[i].bad ? "-" : "",
+		lose_base, lose_factor);
 }
 
 static int __init mtrr_search_optimal_index(void)
 {
-	int i;
 	int num_reg_good;
 	int index_good;
+	int i;
 
 	if (nr_mtrr_spare_reg >= num_var_ranges)
 		nr_mtrr_spare_reg = num_var_ranges - 1;
+
 	num_reg_good = -1;
 	for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
 		if (!min_loss_pfn[i])
@@ -796,24 +797,24 @@ static int __init mtrr_search_optimal_index(void)
 	return index_good;
 }
 
-
 int __init mtrr_cleanup(unsigned address_bits)
 {
-	unsigned long extra_remove_base, extra_remove_size;
+	unsigned long x_remove_base, x_remove_size;
 	unsigned long base, size, def, dummy;
-	mtrr_type type;
 	u64 chunk_size, gran_size;
+	mtrr_type type;
 	int index_good;
 	int i;
 
 	if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
 		return 0;
+
 	rdmsr(MSR_MTRRdefType, def, dummy);
 	def &= 0xff;
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
 
-	/* get it and store it aside */
+	/* Get it and store it aside: */
 	memset(range_state, 0, sizeof(range_state));
 	for (i = 0; i < num_var_ranges; i++) {
 		mtrr_if->get(i, &base, &size, &type);
@@ -822,29 +823,28 @@ int __init mtrr_cleanup(unsigned address_bits)
 		range_state[i].type = type;
 	}
 
-	/* check if we need handle it and can handle it */
+	/* Check if we need handle it and can handle it: */
 	if (!mtrr_need_cleanup())
 		return 0;
 
-	/* print original var MTRRs at first, for debugging: */
+	/* Print original var MTRRs at first, for debugging: */
 	printk(KERN_DEBUG "original variable MTRRs\n");
 	print_out_mtrr_range_state();
 
 	memset(range, 0, sizeof(range));
-	extra_remove_size = 0;
-	extra_remove_base = 1 << (32 - PAGE_SHIFT);
+	x_remove_size = 0;
+	x_remove_base = 1 << (32 - PAGE_SHIFT);
 	if (mtrr_tom2)
-		extra_remove_size =
-			(mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
-	nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
-					  extra_remove_size);
+		x_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - x_remove_base;
+
+	nr_range = x86_get_mtrr_mem_range(range, 0, x_remove_base, x_remove_size);
 	/*
-	 * [0, 1M) should always be coverred by var mtrr with WB
-	 * and fixed mtrrs should take effective before var mtrr for it
+	 * [0, 1M) should always be covered by var mtrr with WB
+	 * and fixed mtrrs should take effect before var mtrr for it:
 	 */
 	nr_range = add_range_with_merge(range, nr_range, 0,
 					(1ULL<<(20 - PAGE_SHIFT)) - 1);
-	/* sort the ranges */
+	/* Sort the ranges: */
 	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
 
 	range_sums = sum_ranges(range, nr_range);
@@ -854,7 +854,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 	if (mtrr_chunk_size && mtrr_gran_size) {
 		i = 0;
 		mtrr_calc_range_state(mtrr_chunk_size, mtrr_gran_size,
-				      extra_remove_base, extra_remove_size, i);
+				      x_remove_base, x_remove_size, i);
 
 		mtrr_print_out_one_result(i);
 
@@ -880,7 +880,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 				continue;
 
 			mtrr_calc_range_state(chunk_size, gran_size,
-				      extra_remove_base, extra_remove_size, i);
+				      x_remove_base, x_remove_size, i);
 			if (debug_print) {
 				mtrr_print_out_one_result(i);
 				printk(KERN_INFO "\n");
@@ -890,7 +890,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 		}
 	}
 
-	/* try to find the optimal index */
+	/* Try to find the optimal index: */
 	index_good = mtrr_search_optimal_index();
 
 	if (index_good != -1) {
@@ -898,7 +898,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 		i = index_good;
 		mtrr_print_out_one_result(i);
 
-		/* convert ranges to var ranges state */
+		/* Convert ranges to var ranges state: */
 		chunk_size = result[i].chunk_sizek;
 		chunk_size <<= 10;
 		gran_size = result[i].gran_sizek;
@@ -941,8 +941,8 @@ early_param("disable_mtrr_trim", disable_mtrr_trim_setup);
  * Note this won't check if the MTRRs < 4GB where the magic bit doesn't
  * apply to are wrong, but so far we don't know of any such case in the wild.
  */
-#define Tom2Enabled (1U << 21)
-#define Tom2ForceMemTypeWB (1U << 22)
+#define Tom2Enabled		(1U << 21)
+#define Tom2ForceMemTypeWB	(1U << 22)
 
 int __init amd_special_default_mtrr(void)
 {
@@ -952,7 +952,7 @@ int __init amd_special_default_mtrr(void)
 		return 0;
 	if (boot_cpu_data.x86 < 0xf || boot_cpu_data.x86 > 0x11)
 		return 0;
-	/* In case some hypervisor doesn't pass SYSCFG through */
+	/* In case some hypervisor doesn't pass SYSCFG through: */
 	if (rdmsr_safe(MSR_K8_SYSCFG, &l, &h) < 0)
 		return 0;
 	/*
@@ -965,19 +965,21 @@ int __init amd_special_default_mtrr(void)
 	return 0;
 }
 
-static u64 __init real_trim_memory(unsigned long start_pfn,
-				   unsigned long limit_pfn)
+static u64 __init
+real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn)
 {
 	u64 trim_start, trim_size;
+
 	trim_start = start_pfn;
 	trim_start <<= PAGE_SHIFT;
+
 	trim_size = limit_pfn;
 	trim_size <<= PAGE_SHIFT;
 	trim_size -= trim_start;
 
-	return e820_update_range(trim_start, trim_size, E820_RAM,
-				E820_RESERVED);
+	return e820_update_range(trim_start, trim_size, E820_RAM, E820_RESERVED);
 }
+
 /**
  * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
  * @end_pfn: ending page frame number
@@ -985,7 +987,7 @@ static u64 __init real_trim_memory(unsigned long start_pfn,
  * Some buggy BIOSes don't setup the MTRRs properly for systems with certain
  * memory configurations.  This routine checks that the highest MTRR matches
  * the end of memory, to make sure the MTRRs having a write back type cover
- * all of the memory the kernel is intending to use. If not, it'll trim any
+ * all of the memory the kernel is intending to use.  If not, it'll trim any
  * memory off the end by adjusting end_pfn, removing it from the kernel's
  * allocation pools, warning the user with an obnoxious message.
  */
@@ -994,21 +996,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	unsigned long i, base, size, highest_pfn = 0, def, dummy;
 	mtrr_type type;
 	u64 total_trim_size;
-
 	/* extra one for all 0 */
 	int num[MTRR_NUM_TYPES + 1];
+
 	/*
 	 * Make sure we only trim uncachable memory on machines that
 	 * support the Intel MTRR architecture:
 	 */
 	if (!is_cpu(INTEL) || disable_mtrr_trim)
 		return 0;
+
 	rdmsr(MSR_MTRRdefType, def, dummy);
 	def &= 0xff;
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
 
-	/* get it and store it aside */
+	/* Get it and store it aside: */
 	memset(range_state, 0, sizeof(range_state));
 	for (i = 0; i < num_var_ranges; i++) {
 		mtrr_if->get(i, &base, &size, &type);
@@ -1017,7 +1020,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 		range_state[i].type = type;
 	}
 
-	/* Find highest cached pfn */
+	/* Find highest cached pfn: */
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
 		if (type != MTRR_TYPE_WRBACK)
@@ -1028,13 +1031,13 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 			highest_pfn = base + size;
 	}
 
-	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
+	/* kvm/qemu doesn't have mtrr set right, don't trim them all: */
 	if (!highest_pfn) {
 		printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n");
 		return 0;
 	}
 
-	/* check entries number */
+	/* Check entries number: */
 	memset(num, 0, sizeof(num));
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
@@ -1046,11 +1049,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 		num[type]++;
 	}
 
-	/* no entry for WB? */
+	/* No entry for WB? */
 	if (!num[MTRR_TYPE_WRBACK])
 		return 0;
 
-	/* check if we only had WB and UC */
+	/* Check if we only had WB and UC: */
 	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
 		num_var_ranges - num[MTRR_NUM_TYPES])
 		return 0;
@@ -1066,31 +1069,31 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	}
 	nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0);
 
+	/* Check the head: */
 	total_trim_size = 0;
-	/* check the head */
 	if (range[0].start)
 		total_trim_size += real_trim_memory(0, range[0].start);
-	/* check the holes */
+
+	/* Check the holes: */
 	for (i = 0; i < nr_range - 1; i++) {
 		if (range[i].end + 1 < range[i+1].start)
 			total_trim_size += real_trim_memory(range[i].end + 1,
 							    range[i+1].start);
 	}
-	/* check the top */
+
+	/* Check the top: */
 	i = nr_range - 1;
 	if (range[i].end + 1 < end_pfn)
 		total_trim_size += real_trim_memory(range[i].end + 1,
 							 end_pfn);
 
 	if (total_trim_size) {
-		printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover"
-			" all of memory, losing %lluMB of RAM.\n",
-			total_trim_size >> 20);
+		pr_warning("WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing %lluMB of RAM.\n", total_trim_size >> 20);
 
 		if (!changed_by_mtrr_cleanup)
 			WARN_ON(1);
 
-		printk(KERN_INFO "update e820 for mtrr\n");
+		pr_info("update e820 for mtrr\n");
 		update_e820();
 
 		return 1;
@@ -1098,4 +1101,3 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	return 0;
 }
-
-- 
cgit v1.2.3


From 2311037708c170977506fbcbe0a2ba0c6d221940 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:52:08 +0530
Subject: x86: Clean up mtrr/cyrix.c

Fix trivial style problems:

  WARNING: Use #include <linux/io.h> instead of <asm/io.h>
  WARNING: line over 80 characters
  ERROR: do not initialise statics to 0 or NULL
  ERROR: space prohibited after that open parenthesis '(' X 2
  ERROR: space prohibited before that close parenthesis ')' X 2
  ERROR: trailing whitespace X 2
  ERROR: trailing statements should be on next line
  ERROR: do not use C99 // comments X 2

arch/x86/kernel/cpu/mtrr/cyrix.o:

   text	   data	    bss	    dec	    hex	filename
   1637	     32	      8	   1677	    68d	cyrix.o.before
   1637	     32	      8	   1677	    68d	cyrix.o.after

md5:
   6f52abd06905be3f4cabb5239f9b0ff0  cyrix.o.before.asm
   6f52abd06905be3f4cabb5239f9b0ff0  cyrix.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Made the code more consistent ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/cyrix.c | 94 ++++++++++++++++++++++------------------
 1 file changed, 51 insertions(+), 43 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c
index ff14c320040..228d982ce09 100644
--- a/arch/x86/kernel/cpu/mtrr/cyrix.c
+++ b/arch/x86/kernel/cpu/mtrr/cyrix.c
@@ -1,38 +1,40 @@
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/mm.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-#include <asm/io.h>
+
 #include <asm/processor-cyrix.h>
 #include <asm/processor-flags.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
 #include "mtrr.h"
 
 static void
 cyrix_get_arr(unsigned int reg, unsigned long *base,
 	      unsigned long *size, mtrr_type * type)
 {
-	unsigned long flags;
 	unsigned char arr, ccr3, rcr, shift;
+	unsigned long flags;
 
 	arr = CX86_ARR_BASE + (reg << 1) + reg;	/* avoid multiplication by 3 */
 
-	/* Save flags and disable interrupts */
 	local_irq_save(flags);
 
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable MAPEN */
-	((unsigned char *) base)[3] = getCx86(arr);
-	((unsigned char *) base)[2] = getCx86(arr + 1);
-	((unsigned char *) base)[1] = getCx86(arr + 2);
+	((unsigned char *)base)[3] = getCx86(arr);
+	((unsigned char *)base)[2] = getCx86(arr + 1);
+	((unsigned char *)base)[1] = getCx86(arr + 2);
 	rcr = getCx86(CX86_RCR_BASE + reg);
-	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
+	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
 
-	/* Enable interrupts if it was enabled previously */
 	local_irq_restore(flags);
+
 	shift = ((unsigned char *) base)[1] & 0x0f;
 	*base >>= PAGE_SHIFT;
 
-	/* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
+	/*
+	 * Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
 	 * Note: shift==0xf means 4G, this is unsupported.
 	 */
 	if (shift)
@@ -76,17 +78,20 @@ cyrix_get_arr(unsigned int reg, unsigned long *base,
 	}
 }
 
+/*
+ * cyrix_get_free_region - get a free ARR.
+ *
+ * @base: the starting (base) address of the region.
+ * @size: the size (in bytes) of the region.
+ *
+ * Returns: the index of the region on success, else -1 on error.
+*/
 static int
 cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/*  [SUMMARY] Get a free ARR.
-    <base> The starting (base) address of the region.
-    <size> The size (in bytes) of the region.
-    [RETURNS] The index of the region on success, else -1 on error.
-*/
 {
-	int i;
-	mtrr_type ltype;
 	unsigned long lbase, lsize;
+	mtrr_type ltype;
+	int i;
 
 	switch (replace_reg) {
 	case 7:
@@ -107,14 +112,17 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 		cyrix_get_arr(7, &lbase, &lsize, &ltype);
 		if (lsize == 0)
 			return 7;
-		/*  Else try ARR0-ARR6 first  */
+		/* Else try ARR0-ARR6 first  */
 	} else {
 		for (i = 0; i < 7; i++) {
 			cyrix_get_arr(i, &lbase, &lsize, &ltype);
 			if (lsize == 0)
 				return i;
 		}
-		/* ARR0-ARR6 isn't free, try ARR7 but its size must be at least 256K */
+		/*
+		 * ARR0-ARR6 isn't free
+		 * try ARR7 but its size must be at least 256K
+		 */
 		cyrix_get_arr(i, &lbase, &lsize, &ltype);
 		if ((lsize == 0) && (size >= 0x40))
 			return i;
@@ -122,21 +130,22 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 	return -ENOSPC;
 }
 
-static u32 cr4 = 0;
-static u32 ccr3;
+static u32 cr4, ccr3;
 
 static void prepare_set(void)
 {
 	u32 cr0;
 
 	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-	if ( cpu_has_pge ) {
+	if (cpu_has_pge) {
 		cr4 = read_cr4();
 		write_cr4(cr4 & ~X86_CR4_PGE);
 	}
 
-	/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
-	    a side-effect  */
+	/*
+	 * Disable and flush caches.
+	 * Note that wbinvd flushes the TLBs as a side-effect
+	 */
 	cr0 = read_cr0() | X86_CR0_CD;
 	wbinvd();
 	write_cr0(cr0);
@@ -147,22 +156,21 @@ static void prepare_set(void)
 
 	/* Cyrix ARRs - everything else was excluded at the top */
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
-
 }
 
 static void post_set(void)
 {
-	/*  Flush caches and TLBs  */
+	/* Flush caches and TLBs */
 	wbinvd();
 
 	/* Cyrix ARRs - everything else was excluded at the top */
 	setCx86(CX86_CCR3, ccr3);
-		
-	/*  Enable caches  */
+
+	/* Enable caches */
 	write_cr0(read_cr0() & 0xbfffffff);
 
-	/*  Restore value of CR4  */
-	if ( cpu_has_pge )
+	/* Restore value of CR4 */
+	if (cpu_has_pge)
 		write_cr4(cr4);
 }
 
@@ -178,7 +186,8 @@ static void cyrix_set_arr(unsigned int reg, unsigned long base,
 		size >>= 6;
 
 	size &= 0x7fff;		/* make sure arr_size <= 14 */
-	for (arr_size = 0; size; arr_size++, size >>= 1) ;
+	for (arr_size = 0; size; arr_size++, size >>= 1)
+		;
 
 	if (reg < 7) {
 		switch (type) {
@@ -215,18 +224,18 @@ static void cyrix_set_arr(unsigned int reg, unsigned long base,
 	prepare_set();
 
 	base <<= PAGE_SHIFT;
-	setCx86(arr, ((unsigned char *) &base)[3]);
-	setCx86(arr + 1, ((unsigned char *) &base)[2]);
-	setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size);
+	setCx86(arr + 0,  ((unsigned char *)&base)[3]);
+	setCx86(arr + 1,  ((unsigned char *)&base)[2]);
+	setCx86(arr + 2, (((unsigned char *)&base)[1]) | arr_size);
 	setCx86(CX86_RCR_BASE + reg, arr_type);
 
 	post_set();
 }
 
 typedef struct {
-	unsigned long base;
-	unsigned long size;
-	mtrr_type type;
+	unsigned long	base;
+	unsigned long	size;
+	mtrr_type	type;
 } arr_state_t;
 
 static arr_state_t arr_state[8] = {
@@ -247,16 +256,17 @@ static void cyrix_set_all(void)
 		setCx86(CX86_CCR0 + i, ccr_state[i]);
 	for (; i < 7; i++)
 		setCx86(CX86_CCR4 + i, ccr_state[i]);
-	for (i = 0; i < 8; i++)
-		cyrix_set_arr(i, arr_state[i].base, 
+
+	for (i = 0; i < 8; i++) {
+		cyrix_set_arr(i, arr_state[i].base,
 			      arr_state[i].size, arr_state[i].type);
+	}
 
 	post_set();
 }
 
 static struct mtrr_ops cyrix_mtrr_ops = {
 	.vendor            = X86_VENDOR_CYRIX,
-//	.init              = cyrix_arr_init,
 	.set_all	   = cyrix_set_all,
 	.set               = cyrix_set_arr,
 	.get               = cyrix_get_arr,
@@ -270,5 +280,3 @@ int __init cyrix_init_mtrr(void)
 	set_mtrr_ops(&cyrix_mtrr_ops);
 	return 0;
 }
-
-//arch_initcall(cyrix_init_mtrr);
-- 
cgit v1.2.3


From a1a499a39911fcfecbebaba1f38588088909f918 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:53:00 +0530
Subject: x86: Clean up mtrr/generic.c

Fix following trivial style problems:

  ERROR: trailing whitespace X 4
  WARNING: Use #include <linux/io.h> instead of <asm/io.h>
  WARNING: braces {} are not necessary for single statement blocks X 3
  ERROR: "foo * bar" should be "foo *bar"
  WARNING: line over 80 characters X 6
  ERROR: "foo * bar" should be "foo *bar"
  ERROR: spaces required around that '=' (ctx:VxO)
  ERROR: space required before that '-' (ctx:OxV)
  WARNING: suspect code indent for conditional statements (8, 12)
  ERROR: spaces required around that '=' (ctx:VxV)
  ERROR: do not initialise statics to 0 or NULL
  ERROR: space prohibited after that open parenthesis '(' X 2
  ERROR: space prohibited before that close parenthesis ')' X 2
  ERROR: trailing statements should be on next line
  ERROR: return is not a function, parentheses are not required

Also use pr_debug and pr_warning where possible.

arch/x86/kernel/cpu/mtrr/generic.o:

   text	   data	    bss	    dec	    hex	filename
   5652	     77	   4224	   9953	   26e1	generic.o.before
   5652	     77	   4220	   9949	   26dd	generic.o.after

The md5 changed:
   b34d6c045f06daa4ed092b90cc760e8f  generic.o.before.asm
   a490c6251cfd8442fbffecc0e09a573d  generic.o.after.asm

Because mtrr_state moved from data to bss, changing its
offsets - and also because __LINE__ numbers changed.

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Further cleanups to make the code more consistent ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/generic.c | 304 +++++++++++++++++++++----------------
 1 file changed, 169 insertions(+), 135 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 0543f69f0b2..55da0c5f68d 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -1,28 +1,34 @@
-/* This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
-   because MTRRs can span upto 40 bits (36bits on most modern x86) */ 
+/*
+ * This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
+ * because MTRRs can span upto 40 bits (36bits on most modern x86)
+ */
+#define DEBUG
+
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 #include <linux/mm.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-#include <asm/system.h>
-#include <asm/cpufeature.h>
+
 #include <asm/processor-flags.h>
+#include <asm/cpufeature.h>
 #include <asm/tlbflush.h>
+#include <asm/system.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
 #include <asm/pat.h>
+
 #include "mtrr.h"
 
 struct fixed_range_block {
-	int base_msr; /* start address of an MTRR block */
-	int ranges;   /* number of MTRRs in this block  */
+	int base_msr;		/* start address of an MTRR block */
+	int ranges;		/* number of MTRRs in this block  */
 };
 
 static struct fixed_range_block fixed_range_blocks[] = {
-	{ MSR_MTRRfix64K_00000, 1 }, /* one  64k MTRR  */
-	{ MSR_MTRRfix16K_80000, 2 }, /* two  16k MTRRs */
-	{ MSR_MTRRfix4K_C0000,  8 }, /* eight 4k MTRRs */
+	{ MSR_MTRRfix64K_00000, 1 }, /* one   64k MTRR  */
+	{ MSR_MTRRfix16K_80000, 2 }, /* two   16k MTRRs */
+	{ MSR_MTRRfix4K_C0000,  8 }, /* eight  4k MTRRs */
 	{}
 };
 
@@ -30,10 +36,10 @@ static unsigned long smp_changes_mask;
 static int mtrr_state_set;
 u64 mtrr_tom2;
 
-struct mtrr_state_type mtrr_state = {};
+struct mtrr_state_type mtrr_state;
 EXPORT_SYMBOL_GPL(mtrr_state);
 
-/**
+/*
  * BIOS is expected to clear MtrrFixDramModEn bit, see for example
  * "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
  * Opteron Processors" (26094 Rev. 3.30 February 2006), section
@@ -104,9 +110,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 	 * Look of multiple ranges matching this address and pick type
 	 * as per MTRR precedence
 	 */
-	if (!(mtrr_state.enabled & 2)) {
+	if (!(mtrr_state.enabled & 2))
 		return mtrr_state.def_type;
-	}
 
 	prev_match = 0xFF;
 	for (i = 0; i < num_var_ranges; ++i) {
@@ -125,9 +130,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 		if (start_state != end_state)
 			return 0xFE;
 
-		if ((start & mask) != (base & mask)) {
+		if ((start & mask) != (base & mask))
 			continue;
-		}
 
 		curr_match = mtrr_state.var_ranges[i].base_lo & 0xff;
 		if (prev_match == 0xFF) {
@@ -148,9 +152,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 			curr_match = MTRR_TYPE_WRTHROUGH;
 		}
 
-		if (prev_match != curr_match) {
+		if (prev_match != curr_match)
 			return MTRR_TYPE_UNCACHABLE;
-		}
 	}
 
 	if (mtrr_tom2) {
@@ -164,7 +167,7 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 	return mtrr_state.def_type;
 }
 
-/*  Get the MSR pair relating to a var range  */
+/* Get the MSR pair relating to a var range */
 static void
 get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
 {
@@ -172,7 +175,7 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
 	rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
 }
 
-/*  fill the MSR pair relating to a var range  */
+/* Fill the MSR pair relating to a var range */
 void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi)
 {
@@ -186,10 +189,9 @@ void fill_mtrr_var_range(unsigned int index,
 	vr[index].mask_hi = mask_hi;
 }
 
-static void
-get_fixed_ranges(mtrr_type * frs)
+static void get_fixed_ranges(mtrr_type *frs)
 {
-	unsigned int *p = (unsigned int *) frs;
+	unsigned int *p = (unsigned int *)frs;
 	int i;
 
 	k8_check_syscfg_dram_mod_en();
@@ -217,22 +219,22 @@ static void __init print_fixed_last(void)
 	if (!last_fixed_end)
 		return;
 
-	printk(KERN_DEBUG "  %05X-%05X %s\n", last_fixed_start,
-		last_fixed_end - 1, mtrr_attrib_to_str(last_fixed_type));
+	pr_debug("  %05X-%05X %s\n", last_fixed_start,
+		 last_fixed_end - 1, mtrr_attrib_to_str(last_fixed_type));
 
 	last_fixed_end = 0;
 }
 
 static void __init update_fixed_last(unsigned base, unsigned end,
-				       mtrr_type type)
+				     mtrr_type type)
 {
 	last_fixed_start = base;
 	last_fixed_end = end;
 	last_fixed_type = type;
 }
 
-static void __init print_fixed(unsigned base, unsigned step,
-			       const mtrr_type *types)
+static void __init
+print_fixed(unsigned base, unsigned step, const mtrr_type *types)
 {
 	unsigned i;
 
@@ -259,54 +261,55 @@ static void __init print_mtrr_state(void)
 	unsigned int i;
 	int high_width;
 
-	printk(KERN_DEBUG "MTRR default type: %s\n",
-			 mtrr_attrib_to_str(mtrr_state.def_type));
+	pr_debug("MTRR default type: %s\n",
+		 mtrr_attrib_to_str(mtrr_state.def_type));
 	if (mtrr_state.have_fixed) {
-		printk(KERN_DEBUG "MTRR fixed ranges %sabled:\n",
-		       mtrr_state.enabled & 1 ? "en" : "dis");
+		pr_debug("MTRR fixed ranges %sabled:\n",
+			 mtrr_state.enabled & 1 ? "en" : "dis");
 		print_fixed(0x00000, 0x10000, mtrr_state.fixed_ranges + 0);
 		for (i = 0; i < 2; ++i)
-			print_fixed(0x80000 + i * 0x20000, 0x04000, mtrr_state.fixed_ranges + (i + 1) * 8);
+			print_fixed(0x80000 + i * 0x20000, 0x04000,
+				    mtrr_state.fixed_ranges + (i + 1) * 8);
 		for (i = 0; i < 8; ++i)
-			print_fixed(0xC0000 + i * 0x08000, 0x01000, mtrr_state.fixed_ranges + (i + 3) * 8);
+			print_fixed(0xC0000 + i * 0x08000, 0x01000,
+				    mtrr_state.fixed_ranges + (i + 3) * 8);
 
 		/* tail */
 		print_fixed_last();
 	}
-	printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
-	       mtrr_state.enabled & 2 ? "en" : "dis");
+	pr_debug("MTRR variable ranges %sabled:\n",
+		 mtrr_state.enabled & 2 ? "en" : "dis");
 	if (size_or_mask & 0xffffffffUL)
 		high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
 	else
 		high_width = ffs(size_or_mask>>32) + 32 - 1;
 	high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
+
 	for (i = 0; i < num_var_ranges; ++i) {
 		if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
-			printk(KERN_DEBUG "  %u base %0*X%05X000 mask %0*X%05X000 %s\n",
-			       i,
-			       high_width,
-			       mtrr_state.var_ranges[i].base_hi,
-			       mtrr_state.var_ranges[i].base_lo >> 12,
-			       high_width,
-			       mtrr_state.var_ranges[i].mask_hi,
-			       mtrr_state.var_ranges[i].mask_lo >> 12,
-			       mtrr_attrib_to_str(mtrr_state.var_ranges[i].base_lo & 0xff));
+			pr_debug("  %u base %0*X%05X000 mask %0*X%05X000 %s\n",
+				 i,
+				 high_width,
+				 mtrr_state.var_ranges[i].base_hi,
+				 mtrr_state.var_ranges[i].base_lo >> 12,
+				 high_width,
+				 mtrr_state.var_ranges[i].mask_hi,
+				 mtrr_state.var_ranges[i].mask_lo >> 12,
+				 mtrr_attrib_to_str(mtrr_state.var_ranges[i].base_lo & 0xff));
 		else
-			printk(KERN_DEBUG "  %u disabled\n", i);
-	}
-	if (mtrr_tom2) {
-		printk(KERN_DEBUG "TOM2: %016llx aka %lldM\n",
-				  mtrr_tom2, mtrr_tom2>>20);
+			pr_debug("  %u disabled\n", i);
 	}
+	if (mtrr_tom2)
+		pr_debug("TOM2: %016llx aka %lldM\n", mtrr_tom2, mtrr_tom2>>20);
 }
 
-/*  Grab all of the MTRR state for this CPU into *state  */
+/* Grab all of the MTRR state for this CPU into *state */
 void __init get_mtrr_state(void)
 {
-	unsigned int i;
 	struct mtrr_var_range *vrs;
-	unsigned lo, dummy;
 	unsigned long flags;
+	unsigned lo, dummy;
+	unsigned int i;
 
 	vrs = mtrr_state.var_ranges;
 
@@ -324,6 +327,7 @@ void __init get_mtrr_state(void)
 
 	if (amd_special_default_mtrr()) {
 		unsigned low, high;
+
 		/* TOP_MEM2 */
 		rdmsr(MSR_K8_TOP_MEM2, low, high);
 		mtrr_tom2 = high;
@@ -344,10 +348,9 @@ void __init get_mtrr_state(void)
 
 	post_set();
 	local_irq_restore(flags);
-
 }
 
-/*  Some BIOS's are fucked and don't set all MTRRs the same!  */
+/* Some BIOS's are messed up and don't set all MTRRs the same! */
 void __init mtrr_state_warn(void)
 {
 	unsigned long mask = smp_changes_mask;
@@ -355,28 +358,33 @@ void __init mtrr_state_warn(void)
 	if (!mask)
 		return;
 	if (mask & MTRR_CHANGE_MASK_FIXED)
-		printk(KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+		pr_warning("mtrr: your CPUs had inconsistent fixed MTRR settings\n");
 	if (mask & MTRR_CHANGE_MASK_VARIABLE)
-		printk(KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n");
+		pr_warning("mtrr: your CPUs had inconsistent variable MTRR settings\n");
 	if (mask & MTRR_CHANGE_MASK_DEFTYPE)
-		printk(KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+		pr_warning("mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+
 	printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n");
 	printk(KERN_INFO "mtrr: corrected configuration.\n");
 }
 
-/* Doesn't attempt to pass an error out to MTRR users
-   because it's quite complicated in some cases and probably not
-   worth it because the best error handling is to ignore it. */
+/*
+ * Doesn't attempt to pass an error out to MTRR users
+ * because it's quite complicated in some cases and probably not
+ * worth it because the best error handling is to ignore it.
+ */
 void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b)
 {
-	if (wrmsr_safe(msr, a, b) < 0)
+	if (wrmsr_safe(msr, a, b) < 0) {
 		printk(KERN_ERR
 			"MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
 			smp_processor_id(), msr, a, b);
+	}
 }
 
 /**
- * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it
+ *		     differs from the value it should have
  * @msr: MSR address of the MTTR which should be checked and updated
  * @changed: pointer which indicates whether the MTRR needed to be changed
  * @msrwords: pointer to the MSR values which the MSR should have
@@ -401,20 +409,23 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
  *
  * Returns: The index of the region on success, else negative on error.
  */
-int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
+int
+generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 {
-	int i, max;
-	mtrr_type ltype;
 	unsigned long lbase, lsize;
+	mtrr_type ltype;
+	int i, max;
 
 	max = num_var_ranges;
 	if (replace_reg >= 0 && replace_reg < max)
 		return replace_reg;
+
 	for (i = 0; i < max; ++i) {
 		mtrr_if->get(i, &lbase, &lsize, &ltype);
 		if (lsize == 0)
 			return i;
 	}
+
 	return -ENOSPC;
 }
 
@@ -434,7 +445,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
 
 	if ((mask_lo & 0x800) == 0) {
-		/*  Invalid (i.e. free) range  */
+		/*  Invalid (i.e. free) range */
 		*base = 0;
 		*size = 0;
 		*type = 0;
@@ -471,27 +482,31 @@ out_put_cpu:
 }
 
 /**
- * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they
+ *		      differ from the saved set
  * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
  */
-static int set_fixed_ranges(mtrr_type * frs)
+static int set_fixed_ranges(mtrr_type *frs)
 {
-	unsigned long long *saved = (unsigned long long *) frs;
+	unsigned long long *saved = (unsigned long long *)frs;
 	bool changed = false;
-	int block=-1, range;
+	int block = -1, range;
 
 	k8_check_syscfg_dram_mod_en();
 
-	while (fixed_range_blocks[++block].ranges)
-	    for (range=0; range < fixed_range_blocks[block].ranges; range++)
-		set_fixed_range(fixed_range_blocks[block].base_msr + range,
-		    &changed, (unsigned int *) saved++);
+	while (fixed_range_blocks[++block].ranges) {
+		for (range = 0; range < fixed_range_blocks[block].ranges; range++)
+			set_fixed_range(fixed_range_blocks[block].base_msr + range,
+					&changed, (unsigned int *)saved++);
+	}
 
 	return changed;
 }
 
-/*  Set the MSR pair relating to a var range. Returns TRUE if
-    changes are made  */
+/*
+ * Set the MSR pair relating to a var range.
+ * Returns true if changes are made.
+ */
 static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
 {
 	unsigned int lo, hi;
@@ -501,6 +516,7 @@ static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
 	if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
 	    || (vr->base_hi & (size_and_mask >> (32 - PAGE_SHIFT))) !=
 		(hi & (size_and_mask >> (32 - PAGE_SHIFT)))) {
+
 		mtrr_wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
 		changed = true;
 	}
@@ -526,21 +542,26 @@ static u32 deftype_lo, deftype_hi;
  */
 static unsigned long set_mtrr_state(void)
 {
-	unsigned int i;
 	unsigned long change_mask = 0;
+	unsigned int i;
 
-	for (i = 0; i < num_var_ranges; i++)
+	for (i = 0; i < num_var_ranges; i++) {
 		if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
 			change_mask |= MTRR_CHANGE_MASK_VARIABLE;
+	}
 
 	if (mtrr_state.have_fixed && set_fixed_ranges(mtrr_state.fixed_ranges))
 		change_mask |= MTRR_CHANGE_MASK_FIXED;
 
-	/*  Set_mtrr_restore restores the old value of MTRRdefType,
-	   so to set it we fiddle with the saved value  */
+	/*
+	 * Set_mtrr_restore restores the old value of MTRRdefType,
+	 * so to set it we fiddle with the saved value:
+	 */
 	if ((deftype_lo & 0xff) != mtrr_state.def_type
 	    || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
-		deftype_lo = (deftype_lo & ~0xcff) | mtrr_state.def_type | (mtrr_state.enabled << 10);
+
+		deftype_lo = (deftype_lo & ~0xcff) | mtrr_state.def_type |
+			     (mtrr_state.enabled << 10);
 		change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
 	}
 
@@ -548,33 +569,36 @@ static unsigned long set_mtrr_state(void)
 }
 
 
-static unsigned long cr4 = 0;
+static unsigned long cr4;
 static DEFINE_SPINLOCK(set_atomicity_lock);
 
 /*
- * Since we are disabling the cache don't allow any interrupts - they
- * would run extremely slow and would only increase the pain.  The caller must
- * ensure that local interrupts are disabled and are reenabled after post_set()
- * has been called.
+ * Since we are disabling the cache don't allow any interrupts,
+ * they would run extremely slow and would only increase the pain.
+ *
+ * The caller must ensure that local interrupts are disabled and
+ * are reenabled after post_set() has been called.
  */
-
 static void prepare_set(void) __acquires(set_atomicity_lock)
 {
 	unsigned long cr0;
 
-	/*  Note that this is not ideal, since the cache is only flushed/disabled
-	   for this CPU while the MTRRs are changed, but changing this requires
-	   more invasive changes to the way the kernel boots  */
+	/*
+	 * Note that this is not ideal
+	 * since the cache is only flushed/disabled for this CPU while the
+	 * MTRRs are changed, but changing this requires more invasive
+	 * changes to the way the kernel boots
+	 */
 
 	spin_lock(&set_atomicity_lock);
 
-	/*  Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+	/* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
 	cr0 = read_cr0() | X86_CR0_CD;
 	write_cr0(cr0);
 	wbinvd();
 
-	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-	if ( cpu_has_pge ) {
+	/* Save value of CR4 and clear Page Global Enable (bit 7) */
+	if (cpu_has_pge) {
 		cr4 = read_cr4();
 		write_cr4(cr4 & ~X86_CR4_PGE);
 	}
@@ -582,26 +606,26 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 	/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
 	__flush_tlb();
 
-	/*  Save MTRR state */
+	/* Save MTRR state */
 	rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
 
-	/*  Disable MTRRs, and set the default type to uncached  */
+	/* Disable MTRRs, and set the default type to uncached */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
 }
 
 static void post_set(void) __releases(set_atomicity_lock)
 {
-	/*  Flush TLBs (no need to flush caches - they are disabled)  */
+	/* Flush TLBs (no need to flush caches - they are disabled) */
 	__flush_tlb();
 
 	/* Intel (P6) standard MTRRs */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
-		
-	/*  Enable caches  */
+
+	/* Enable caches */
 	write_cr0(read_cr0() & 0xbfffffff);
 
-	/*  Restore value of CR4  */
-	if ( cpu_has_pge )
+	/* Restore value of CR4 */
+	if (cpu_has_pge)
 		write_cr4(cr4);
 	spin_unlock(&set_atomicity_lock);
 }
@@ -623,24 +647,27 @@ static void generic_set_all(void)
 	post_set();
 	local_irq_restore(flags);
 
-	/*  Use the atomic bitops to update the global mask  */
+	/* Use the atomic bitops to update the global mask */
 	for (count = 0; count < sizeof mask * 8; ++count) {
 		if (mask & 0x01)
 			set_bit(count, &smp_changes_mask);
 		mask >>= 1;
 	}
-	
+
 }
 
+/**
+ * generic_set_mtrr - set variable MTRR register on the local CPU.
+ *
+ * @reg: The register to set.
+ * @base: The base address of the region.
+ * @size: The size of the region. If this is 0 the region is disabled.
+ * @type: The type of the region.
+ *
+ * Returns nothing.
+ */
 static void generic_set_mtrr(unsigned int reg, unsigned long base,
 			     unsigned long size, mtrr_type type)
-/*  [SUMMARY] Set variable MTRR register on the local CPU.
-    <reg> The register to set.
-    <base> The base address of the region.
-    <size> The size of the region. If this is 0 the region is disabled.
-    <type> The type of the region.
-    [RETURNS] Nothing.
-*/
 {
 	unsigned long flags;
 	struct mtrr_var_range *vr;
@@ -651,8 +678,10 @@ static void generic_set_mtrr(unsigned int reg, unsigned long base,
 	prepare_set();
 
 	if (size == 0) {
-		/* The invalid bit is kept in the mask, so we simply clear the
-		   relevant mask register to disable a range. */
+		/*
+		 * The invalid bit is kept in the mask, so we simply
+		 * clear the relevant mask register to disable a range.
+		 */
 		mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0);
 		memset(vr, 0, sizeof(struct mtrr_var_range));
 	} else {
@@ -669,46 +698,50 @@ static void generic_set_mtrr(unsigned int reg, unsigned long base,
 	local_irq_restore(flags);
 }
 
-int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+int generic_validate_add_page(unsigned long base, unsigned long size,
+			      unsigned int type)
 {
 	unsigned long lbase, last;
 
-	/*  For Intel PPro stepping <= 7, must be 4 MiB aligned 
-	    and not touch 0x70000000->0x7003FFFF */
+	/*
+	 * For Intel PPro stepping <= 7
+	 * must be 4 MiB aligned and not touch 0x70000000 -> 0x7003FFFF
+	 */
 	if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
 	    boot_cpu_data.x86_model == 1 &&
 	    boot_cpu_data.x86_mask <= 7) {
 		if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
-			printk(KERN_WARNING "mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
+			pr_warning("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
 			return -EINVAL;
 		}
 		if (!(base + size < 0x70000 || base > 0x7003F) &&
 		    (type == MTRR_TYPE_WRCOMB
 		     || type == MTRR_TYPE_WRBACK)) {
-			printk(KERN_WARNING "mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
+			pr_warning("mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
 			return -EINVAL;
 		}
 	}
 
-	/*  Check upper bits of base and last are equal and lower bits are 0
-	    for base and 1 for last  */
+	/*
+	 * Check upper bits of base and last are equal and lower bits are 0
+	 * for base and 1 for last
+	 */
 	last = base + size - 1;
 	for (lbase = base; !(lbase & 1) && (last & 1);
-	     lbase = lbase >> 1, last = last >> 1) ;
+	     lbase = lbase >> 1, last = last >> 1)
+		;
 	if (lbase != last) {
-		printk(KERN_WARNING "mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n",
-		       base, size);
+		pr_warning("mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", base, size);
 		return -EINVAL;
 	}
 	return 0;
 }
 
-
 static int generic_have_wrcomb(void)
 {
 	unsigned long config, dummy;
 	rdmsr(MSR_MTRRcap, config, dummy);
-	return (config & (1 << 10));
+	return config & (1 << 10);
 }
 
 int positive_have_wrcomb(void)
@@ -716,14 +749,15 @@ int positive_have_wrcomb(void)
 	return 1;
 }
 
-/* generic structure...
+/*
+ * Generic structure...
  */
 struct mtrr_ops generic_mtrr_ops = {
-	.use_intel_if      = 1,
-	.set_all	   = generic_set_all,
-	.get               = generic_get_mtrr,
-	.get_free_region   = generic_get_free_region,
-	.set               = generic_set_mtrr,
-	.validate_add_page = generic_validate_add_page,
-	.have_wrcomb       = generic_have_wrcomb,
+	.use_intel_if		= 1,
+	.set_all		= generic_set_all,
+	.get			= generic_get_mtrr,
+	.get_free_region	= generic_get_free_region,
+	.set			= generic_set_mtrr,
+	.validate_add_page	= generic_validate_add_page,
+	.have_wrcomb		= generic_have_wrcomb,
 };
-- 
cgit v1.2.3


From 26dc67eda19beafb7e5ef2770cec5b3ee5995a8e Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:53:40 +0530
Subject: x86: Clean up mtrr/if.c

Fix:

  WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
  ERROR: trailing whitespace X 7
  ERROR: trailing statements should be on next line X 3
  WARNING: line over 80 characters X 5
  ERROR: space required before the open parenthesis '('

arch/x86/kernel/cpu/mtrr/if.o:

   text	   data	    bss	    dec	    hex	filename
   2239	      4	      0	   2243	    8c3	if.o.before
   2239	      4	      0	   2243	    8c3	if.o.after

md5:
   78d1f2aa4843ec6509c18e2dee54bc7f  if.o.before.asm
   78d1f2aa4843ec6509c18e2dee54bc7f  if.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More cleanups to make the code more consistent. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/if.c | 135 ++++++++++++++++++++++++------------------
 1 file changed, 76 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index fb73a52913a..08b6ea4c62b 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -1,27 +1,28 @@
-#include <linux/init.h>
-#include <linux/proc_fs.h>
 #include <linux/capability.h>
-#include <linux/ctype.h>
-#include <linux/module.h>
 #include <linux/seq_file.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
 
 #define LINE_SIZE 80
 
 #include <asm/mtrr.h>
+
 #include "mtrr.h"
 
 #define FILE_FCOUNT(f) (((struct seq_file *)((f)->private_data))->private)
 
 static const char *const mtrr_strings[MTRR_NUM_TYPES] =
 {
-    "uncachable",               /* 0 */
-    "write-combining",          /* 1 */
-    "?",                        /* 2 */
-    "?",                        /* 3 */
-    "write-through",            /* 4 */
-    "write-protect",            /* 5 */
-    "write-back",               /* 6 */
+	"uncachable",		/* 0 */
+	"write-combining",	/* 1 */
+	"?",			/* 2 */
+	"?",			/* 3 */
+	"write-through",	/* 4 */
+	"write-protect",	/* 5 */
+	"write-back",		/* 6 */
 };
 
 const char *mtrr_attrib_to_str(int x)
@@ -35,8 +36,8 @@ static int
 mtrr_file_add(unsigned long base, unsigned long size,
 	      unsigned int type, bool increment, struct file *file, int page)
 {
+	unsigned int *fcount = FILE_FCOUNT(file);
 	int reg, max;
-	unsigned int *fcount = FILE_FCOUNT(file); 
 
 	max = num_var_ranges;
 	if (fcount == NULL) {
@@ -61,8 +62,8 @@ static int
 mtrr_file_del(unsigned long base, unsigned long size,
 	      struct file *file, int page)
 {
-	int reg;
 	unsigned int *fcount = FILE_FCOUNT(file);
+	int reg;
 
 	if (!page) {
 		if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
@@ -81,13 +82,14 @@ mtrr_file_del(unsigned long base, unsigned long size,
 	return reg;
 }
 
-/* RED-PEN: seq_file can seek now. this is ignored. */
+/*
+ * seq_file can seek but we ignore it.
+ *
+ * Format of control line:
+ *    "base=%Lx size=%Lx type=%s" or "disable=%d"
+ */
 static ssize_t
 mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
-/*  Format of control line:
-    "base=%Lx size=%Lx type=%s"     OR:
-    "disable=%d"
-*/
 {
 	int i, err;
 	unsigned long reg;
@@ -100,15 +102,18 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 		return -EPERM;
 	if (!len)
 		return -EINVAL;
+
 	memset(line, 0, LINE_SIZE);
 	if (len > LINE_SIZE)
 		len = LINE_SIZE;
 	if (copy_from_user(line, buf, len - 1))
 		return -EFAULT;
+
 	linelen = strlen(line);
 	ptr = line + linelen - 1;
 	if (linelen && *ptr == '\n')
 		*ptr = '\0';
+
 	if (!strncmp(line, "disable=", 8)) {
 		reg = simple_strtoul(line + 8, &ptr, 0);
 		err = mtrr_del_page(reg, 0, 0);
@@ -116,28 +121,35 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 			return err;
 		return len;
 	}
+
 	if (strncmp(line, "base=", 5))
 		return -EINVAL;
+
 	base = simple_strtoull(line + 5, &ptr, 0);
-	for (; isspace(*ptr); ++ptr) ;
+	for (; isspace(*ptr); ++ptr)
+		;
+
 	if (strncmp(ptr, "size=", 5))
 		return -EINVAL;
+
 	size = simple_strtoull(ptr + 5, &ptr, 0);
 	if ((base & 0xfff) || (size & 0xfff))
 		return -EINVAL;
-	for (; isspace(*ptr); ++ptr) ;
+	for (; isspace(*ptr); ++ptr)
+		;
+
 	if (strncmp(ptr, "type=", 5))
 		return -EINVAL;
 	ptr += 5;
-	for (; isspace(*ptr); ++ptr) ;
+	for (; isspace(*ptr); ++ptr)
+		;
+
 	for (i = 0; i < MTRR_NUM_TYPES; ++i) {
 		if (strcmp(ptr, mtrr_strings[i]))
 			continue;
 		base >>= PAGE_SHIFT;
 		size >>= PAGE_SHIFT;
-		err =
-		    mtrr_add_page((unsigned long) base, (unsigned long) size, i,
-				  true);
+		err = mtrr_add_page((unsigned long)base, (unsigned long)size, i, true);
 		if (err < 0)
 			return err;
 		return len;
@@ -181,7 +193,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	case MTRRIOC32_SET_PAGE_ENTRY:
 	case MTRRIOC32_DEL_PAGE_ENTRY:
 	case MTRRIOC32_KILL_PAGE_ENTRY: {
-		struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg;
+		struct mtrr_sentry32 __user *s32;
+
+		s32 = (struct mtrr_sentry32 __user *)__arg;
 		err = get_user(sentry.base, &s32->base);
 		err |= get_user(sentry.size, &s32->size);
 		err |= get_user(sentry.type, &s32->type);
@@ -191,7 +205,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	}
 	case MTRRIOC32_GET_ENTRY:
 	case MTRRIOC32_GET_PAGE_ENTRY: {
-		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		struct mtrr_gentry32 __user *g32;
+
+		g32 = (struct mtrr_gentry32 __user *)__arg;
 		err = get_user(gentry.regnum, &g32->regnum);
 		err |= get_user(gentry.base, &g32->base);
 		err |= get_user(gentry.size, &g32->size);
@@ -314,7 +330,7 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	if (err)
 		return err;
 
-	switch(cmd) {
+	switch (cmd) {
 	case MTRRIOC_GET_ENTRY:
 	case MTRRIOC_GET_PAGE_ENTRY:
 		if (copy_to_user(arg, &gentry, sizeof gentry))
@@ -323,7 +339,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 #ifdef CONFIG_COMPAT
 	case MTRRIOC32_GET_ENTRY:
 	case MTRRIOC32_GET_PAGE_ENTRY: {
-		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		struct mtrr_gentry32 __user *g32;
+
+		g32 = (struct mtrr_gentry32 __user *)__arg;
 		err = put_user(gentry.base, &g32->base);
 		err |= put_user(gentry.size, &g32->size);
 		err |= put_user(gentry.regnum, &g32->regnum);
@@ -335,11 +353,10 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	return err;
 }
 
-static int
-mtrr_close(struct inode *ino, struct file *file)
+static int mtrr_close(struct inode *ino, struct file *file)
 {
-	int i, max;
 	unsigned int *fcount = FILE_FCOUNT(file);
+	int i, max;
 
 	if (fcount != NULL) {
 		max = num_var_ranges;
@@ -359,22 +376,22 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset);
 
 static int mtrr_open(struct inode *inode, struct file *file)
 {
-	if (!mtrr_if) 
+	if (!mtrr_if)
 		return -EIO;
-	if (!mtrr_if->get) 
-		return -ENXIO; 
+	if (!mtrr_if->get)
+		return -ENXIO;
 	return single_open(file, mtrr_seq_show, NULL);
 }
 
 static const struct file_operations mtrr_fops = {
-	.owner   = THIS_MODULE,
-	.open	 = mtrr_open, 
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.write   = mtrr_write,
-	.unlocked_ioctl = mtrr_ioctl,
-	.compat_ioctl = mtrr_ioctl,
-	.release = mtrr_close,
+	.owner			= THIS_MODULE,
+	.open			= mtrr_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.write			= mtrr_write,
+	.unlocked_ioctl		= mtrr_ioctl,
+	.compat_ioctl		= mtrr_ioctl,
+	.release		= mtrr_close,
 };
 
 static int mtrr_seq_show(struct seq_file *seq, void *offset)
@@ -388,23 +405,24 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset)
 	max = num_var_ranges;
 	for (i = 0; i < max; i++) {
 		mtrr_if->get(i, &base, &size, &type);
-		if (size == 0)
+		if (size == 0) {
 			mtrr_usage_table[i] = 0;
-		else {
-			if (size < (0x100000 >> PAGE_SHIFT)) {
-				/* less than 1MB */
-				factor = 'K';
-				size <<= PAGE_SHIFT - 10;
-			} else {
-				factor = 'M';
-				size >>= 20 - PAGE_SHIFT;
-			}
-			/* RED-PEN: base can be > 32bit */ 
-			len += seq_printf(seq, 
-				   "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n",
-			     i, base, base >> (20 - PAGE_SHIFT), size, factor,
-			     mtrr_usage_table[i], mtrr_attrib_to_str(type));
+			continue;
 		}
+		if (size < (0x100000 >> PAGE_SHIFT)) {
+			/* less than 1MB */
+			factor = 'K';
+			size <<= PAGE_SHIFT - 10;
+		} else {
+			factor = 'M';
+			size >>= 20 - PAGE_SHIFT;
+		}
+		/* Base can be > 32bit */
+		len += seq_printf(seq, "reg%02i: base=0x%06lx000 "
+			"(%5luMB), size=%5lu%cB, count=%d: %s\n",
+			i, base, base >> (20 - PAGE_SHIFT), size,
+			factor, mtrr_usage_table[i],
+			mtrr_attrib_to_str(type));
 	}
 	return 0;
 }
@@ -422,6 +440,5 @@ static int __init mtrr_if_init(void)
 	proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_fops);
 	return 0;
 }
-
 arch_initcall(mtrr_if_init);
 #endif			/*  CONFIG_PROC_FS  */
-- 
cgit v1.2.3


From 3ec8dbcb09bb6df83993ca03e88cb85e3aaa8edb Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:54:16 +0530
Subject: x86: Clean up mtrr/mtrr.h

Fix:

  ERROR: do not use C99 // comments
  ERROR: "foo * bar" should be "foo *bar" X 2

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More tidyups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/mtrr.h | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 7538b767f20..a501dee9a87 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -1,5 +1,5 @@
 /*
- * local mtrr defines.
+ * local MTRR defines.
  */
 
 #include <linux/types.h>
@@ -14,13 +14,12 @@ extern unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 struct mtrr_ops {
 	u32	vendor;
 	u32	use_intel_if;
-//	void	(*init)(void);
 	void	(*set)(unsigned int reg, unsigned long base,
 		       unsigned long size, mtrr_type type);
 	void	(*set_all)(void);
 
 	void	(*get)(unsigned int reg, unsigned long *base,
-		       unsigned long *size, mtrr_type * type);
+		       unsigned long *size, mtrr_type *type);
 	int	(*get_free_region)(unsigned long base, unsigned long size,
 				   int replace_reg);
 	int	(*validate_add_page)(unsigned long base, unsigned long size,
@@ -39,11 +38,11 @@ extern int positive_have_wrcomb(void);
 
 /* library functions for processor-specific routines */
 struct set_mtrr_context {
-	unsigned long flags;
-	unsigned long cr4val;
-	u32 deftype_lo;
-	u32 deftype_hi;
-	u32 ccr3;
+	unsigned long	flags;
+	unsigned long	cr4val;
+	u32		deftype_lo;
+	u32		deftype_hi;
+	u32		ccr3;
 };
 
 void set_mtrr_done(struct set_mtrr_context *ctxt);
@@ -54,10 +53,10 @@ void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
 void get_mtrr_state(void);
 
-extern void set_mtrr_ops(struct mtrr_ops * ops);
+extern void set_mtrr_ops(struct mtrr_ops *ops);
 
 extern u64 size_or_mask, size_and_mask;
-extern struct mtrr_ops * mtrr_if;
+extern struct mtrr_ops *mtrr_if;
 
 #define is_cpu(vnd)	(mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd)
 #define use_intel()	(mtrr_if && mtrr_if->use_intel_if == 1)
-- 
cgit v1.2.3


From 09b22c85d59dd935fdfa71655a443785e3f99c18 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:54:53 +0530
Subject: x86: Clean up mtrr/state.c

Fix:

  WARNING: Use #include <linux/io.h> instead of <asm/io.h>
  WARNING: line over 80 characters X 4

arch/x86/kernel/cpu/mtrr/state.o:

   text	   data	    bss	    dec	    hex	filename
    864	      0	      0	    864	    360	state.o.before
    864	      0	      0	    864	    360	state.o.after

md5:
   c5c4364b9aeac74d70111e1e49667a2c  state.o.before.asm
   c5c4364b9aeac74d70111e1e49667a2c  state.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/state.c | 68 +++++++++++++++++++++++-----------------
 1 file changed, 40 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
index 1f5fb1588d1..dfc80b4e6b0 100644
--- a/arch/x86/kernel/cpu/mtrr/state.c
+++ b/arch/x86/kernel/cpu/mtrr/state.c
@@ -1,24 +1,25 @@
-#include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
 #include <asm/processor-cyrix.h>
 #include <asm/processor-flags.h>
-#include "mtrr.h"
+#include <asm/mtrr.h>
+#include <asm/msr.h>
 
+#include "mtrr.h"
 
-/*  Put the processor into a state where MTRRs can be safely set  */
+/* Put the processor into a state where MTRRs can be safely set */
 void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
 {
 	unsigned int cr0;
 
-	/*  Disable interrupts locally  */
+	/* Disable interrupts locally */
 	local_irq_save(ctxt->flags);
 
 	if (use_intel() || is_cpu(CYRIX)) {
 
-		/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+		/* Save value of CR4 and clear Page Global Enable (bit 7) */
 		if (cpu_has_pge) {
 			ctxt->cr4val = read_cr4();
 			write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
@@ -33,50 +34,61 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
 		write_cr0(cr0);
 		wbinvd();
 
-		if (use_intel())
-			/*  Save MTRR state */
+		if (use_intel()) {
+			/* Save MTRR state */
 			rdmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
-		else
-			/* Cyrix ARRs - everything else were excluded at the top */
+		} else {
+			/*
+			 * Cyrix ARRs -
+			 * everything else were excluded at the top
+			 */
 			ctxt->ccr3 = getCx86(CX86_CCR3);
+		}
 	}
 }
 
 void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
 {
-	if (use_intel())
-		/*  Disable MTRRs, and set the default type to uncached  */
+	if (use_intel()) {
+		/* Disable MTRRs, and set the default type to uncached */
 		mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo & 0xf300UL,
 		      ctxt->deftype_hi);
-	else if (is_cpu(CYRIX))
-		/* Cyrix ARRs - everything else were excluded at the top */
-		setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+	} else {
+		if (is_cpu(CYRIX)) {
+			/* Cyrix ARRs - everything else were excluded at the top */
+			setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+		}
+	}
 }
 
-/*  Restore the processor after a set_mtrr_prepare  */
+/* Restore the processor after a set_mtrr_prepare */
 void set_mtrr_done(struct set_mtrr_context *ctxt)
 {
 	if (use_intel() || is_cpu(CYRIX)) {
 
-		/*  Flush caches and TLBs  */
+		/* Flush caches and TLBs */
 		wbinvd();
 
-		/*  Restore MTRRdefType  */
-		if (use_intel())
+		/* Restore MTRRdefType */
+		if (use_intel()) {
 			/* Intel (P6) standard MTRRs */
-			mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
-		else
-			/* Cyrix ARRs - everything else was excluded at the top */
+			mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo,
+				   ctxt->deftype_hi);
+		} else {
+			/*
+			 * Cyrix ARRs -
+			 * everything else was excluded at the top
+			 */
 			setCx86(CX86_CCR3, ctxt->ccr3);
+		}
 
-		/*  Enable caches  */
+		/* Enable caches */
 		write_cr0(read_cr0() & 0xbfffffff);
 
-		/*  Restore value of CR4  */
+		/* Restore value of CR4 */
 		if (cpu_has_pge)
 			write_cr4(ctxt->cr4val);
 	}
-	/*  Re-enable interrupts locally (if enabled previously)  */
+	/* Re-enable interrupts locally (if enabled previously) */
 	local_irq_restore(ctxt->flags);
 }
-
-- 
cgit v1.2.3


From dbd51be026eaf84088fdee7fab9f38fa92eef26d Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:56:28 +0530
Subject: x86: Clean up mtrr/main.c

Fix following trivial style problems:

  ERROR: trailing whitespace X 25
  WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
  WARNING: Use #include <linux/kvm_para.h> instead of <asm/kvm_para.h>
  ERROR: do not initialise externals to 0 or NULL X 2
  ERROR: "foo * bar" should be "foo *bar" X 5
  ERROR: do not use assignment in if condition X 2
  WARNING: line over 80 characters X 8
  ERROR: return is not a function, parentheses are not required
  WARNING: braces {} are not necessary for any arm of this statement
  ERROR: space required before the open parenthesis '(' X 2
  ERROR: open brace '{' following function declarations go on the next line
  ERROR: space required after that ',' (ctx:VxV) X 8
  ERROR: space required before the open parenthesis '(' X 3
  ERROR: else should follow close brace '}'
  WARNING: space prohibited between function name and open parenthesis '('
  WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable X 2

Also use pr_debug and pr_warning where possible.

total: 50 errors, 14 warnings

arch/x86/kernel/cpu/mtrr/main.o:

   text	   data	    bss	    dec	    hex	filename
   3668	    116	   4156	   7940	   1f04	main.o.before
   3668	    116	   4156	   7940	   1f04	main.o.after

md5:
   e01af2fd28deef77c8d01e71acfbd365  main.o.before.asm
   e01af2fd28deef77c8d01e71acfbd365  main.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
Cc: Avi Kivity <avi@redhat.com> # Avi, please have a look at the kvm_para.h bit
[ More cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/main.c | 455 +++++++++++++++++++++-------------------
 1 file changed, 242 insertions(+), 213 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 8fc248b5aea..7af0f88a416 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -25,43 +25,48 @@
     Operating System Writer's Guide" (Intel document number 242692),
     section 11.11.7
 
-    This was cleaned and made readable by Patrick Mochel <mochel@osdl.org> 
-    on 6-7 March 2002. 
-    Source: Intel Architecture Software Developers Manual, Volume 3: 
+    This was cleaned and made readable by Patrick Mochel <mochel@osdl.org>
+    on 6-7 March 2002.
+    Source: Intel Architecture Software Developers Manual, Volume 3:
     System Programming Guide; Section 9.11. (1997 edition - PPro).
 */
 
+#define DEBUG
+
+#include <linux/types.h> /* FIXME: kvm_para.h needs this */
+
+#include <linux/kvm_para.h>
+#include <linux/uaccess.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/init.h>
+#include <linux/sort.h>
+#include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/sort.h>
 
+#include <asm/processor.h>
 #include <asm/e820.h>
 #include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/kvm_para.h>
+
 #include "mtrr.h"
 
-u32 num_var_ranges = 0;
+u32 num_var_ranges;
 
 unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 static DEFINE_MUTEX(mtrr_mutex);
 
 u64 size_or_mask, size_and_mask;
 
-static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {};
+static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
 
-struct mtrr_ops * mtrr_if = NULL;
+struct mtrr_ops *mtrr_if;
 
 static void set_mtrr(unsigned int reg, unsigned long base,
 		     unsigned long size, mtrr_type type);
 
-void set_mtrr_ops(struct mtrr_ops * ops)
+void set_mtrr_ops(struct mtrr_ops *ops)
 {
 	if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
 		mtrr_ops[ops->vendor] = ops;
@@ -72,30 +77,36 @@ static int have_wrcomb(void)
 {
 	struct pci_dev *dev;
 	u8 rev;
-	
-	if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) {
-		/* ServerWorks LE chipsets < rev 6 have problems with write-combining
-		   Don't allow it and leave room for other chipsets to be tagged */
+
+	dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL);
+	if (dev != NULL) {
+		/*
+		 * ServerWorks LE chipsets < rev 6 have problems with
+		 * write-combining. Don't allow it and leave room for other
+		 * chipsets to be tagged
+		 */
 		if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
 		    dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) {
 			pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
 			if (rev <= 5) {
-				printk(KERN_INFO "mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
+				pr_info("mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
 				pci_dev_put(dev);
 				return 0;
 			}
 		}
-		/* Intel 450NX errata # 23. Non ascending cacheline evictions to
-		   write combining memory may resulting in data corruption */
+		/*
+		 * Intel 450NX errata # 23. Non ascending cacheline evictions to
+		 * write combining memory may resulting in data corruption
+		 */
 		if (dev->vendor == PCI_VENDOR_ID_INTEL &&
 		    dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
-			printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+			pr_info("mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
 			pci_dev_put(dev);
 			return 0;
 		}
 		pci_dev_put(dev);
-	}		
-	return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0);
+	}
+	return mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0;
 }
 
 /*  This function returns the number of variable MTRRs  */
@@ -103,12 +114,13 @@ static void __init set_num_var_ranges(void)
 {
 	unsigned long config = 0, dummy;
 
-	if (use_intel()) {
+	if (use_intel())
 		rdmsr(MSR_MTRRcap, config, dummy);
-	} else if (is_cpu(AMD))
+	else if (is_cpu(AMD))
 		config = 2;
 	else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
 		config = 8;
+
 	num_var_ranges = config & 0xff;
 }
 
@@ -130,10 +142,12 @@ struct set_mtrr_data {
 	mtrr_type	smp_type;
 };
 
+/**
+ * ipi_handler - Synchronisation handler. Executed by "other" CPUs.
+ *
+ * Returns nothing.
+ */
 static void ipi_handler(void *info)
-/*  [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
-    [RETURNS] Nothing.
-*/
 {
 #ifdef CONFIG_SMP
 	struct set_mtrr_data *data = info;
@@ -142,18 +156,19 @@ static void ipi_handler(void *info)
 	local_irq_save(flags);
 
 	atomic_dec(&data->count);
-	while(!atomic_read(&data->gate))
+	while (!atomic_read(&data->gate))
 		cpu_relax();
 
 	/*  The master has cleared me to execute  */
-	if (data->smp_reg != ~0U) 
-		mtrr_if->set(data->smp_reg, data->smp_base, 
+	if (data->smp_reg != ~0U) {
+		mtrr_if->set(data->smp_reg, data->smp_base,
 			     data->smp_size, data->smp_type);
-	else
+	} else {
 		mtrr_if->set_all();
+	}
 
 	atomic_dec(&data->count);
-	while(atomic_read(&data->gate))
+	while (atomic_read(&data->gate))
 		cpu_relax();
 
 	atomic_dec(&data->count);
@@ -161,7 +176,8 @@ static void ipi_handler(void *info)
 #endif
 }
 
-static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
+static inline int types_compatible(mtrr_type type1, mtrr_type type2)
+{
 	return type1 == MTRR_TYPE_UNCACHABLE ||
 	       type2 == MTRR_TYPE_UNCACHABLE ||
 	       (type1 == MTRR_TYPE_WRTHROUGH && type2 == MTRR_TYPE_WRBACK) ||
@@ -176,10 +192,10 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
  * @type:	mtrr type
  *
  * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
- * 
+ *
  * 1. Send IPI to do the following:
  * 2. Disable Interrupts
- * 3. Wait for all procs to do so 
+ * 3. Wait for all procs to do so
  * 4. Enter no-fill cache mode
  * 5. Flush caches
  * 6. Clear PGE bit
@@ -189,26 +205,27 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
  * 10. Enable all range registers
  * 11. Flush all TLBs and caches again
  * 12. Enter normal cache mode and reenable caching
- * 13. Set PGE 
+ * 13. Set PGE
  * 14. Wait for buddies to catch up
  * 15. Enable interrupts.
- * 
+ *
  * What does that mean for us? Well, first we set data.count to the number
  * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
  * until it hits 0 and proceed. We set the data.gate flag and reset data.count.
- * Meanwhile, they are waiting for that flag to be set. Once it's set, each 
- * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it 
- * differently, so we call mtrr_if->set() callback and let them take care of it.
- * When they're done, they again decrement data->count and wait for data.gate to 
- * be reset. 
- * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag.
+ * Meanwhile, they are waiting for that flag to be set. Once it's set, each
+ * CPU goes through the transition of updating MTRRs.
+ * The CPU vendors may each do it differently,
+ * so we call mtrr_if->set() callback and let them take care of it.
+ * When they're done, they again decrement data->count and wait for data.gate
+ * to be reset.
+ * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag
  * Everyone then enables interrupts and we all continue on.
  *
  * Note that the mechanism is the same for UP systems, too; all the SMP stuff
  * becomes nops.
  */
-static void set_mtrr(unsigned int reg, unsigned long base,
-		     unsigned long size, mtrr_type type)
+static void
+set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
 {
 	struct set_mtrr_data data;
 	unsigned long flags;
@@ -218,121 +235,122 @@ static void set_mtrr(unsigned int reg, unsigned long base,
 	data.smp_size = size;
 	data.smp_type = type;
 	atomic_set(&data.count, num_booting_cpus() - 1);
-	/* make sure data.count is visible before unleashing other CPUs */
+
+	/* Make sure data.count is visible before unleashing other CPUs */
 	smp_wmb();
-	atomic_set(&data.gate,0);
+	atomic_set(&data.gate, 0);
 
-	/*  Start the ball rolling on other CPUs  */
+	/* Start the ball rolling on other CPUs */
 	if (smp_call_function(ipi_handler, &data, 0) != 0)
 		panic("mtrr: timed out waiting for other CPUs\n");
 
 	local_irq_save(flags);
 
-	while(atomic_read(&data.count))
+	while (atomic_read(&data.count))
 		cpu_relax();
 
-	/* ok, reset count and toggle gate */
+	/* Ok, reset count and toggle gate */
 	atomic_set(&data.count, num_booting_cpus() - 1);
 	smp_wmb();
-	atomic_set(&data.gate,1);
+	atomic_set(&data.gate, 1);
 
-	/* do our MTRR business */
+	/* Do our MTRR business */
 
-	/* HACK!
+	/*
+	 * HACK!
 	 * We use this same function to initialize the mtrrs on boot.
 	 * The state of the boot cpu's mtrrs has been saved, and we want
-	 * to replicate across all the APs. 
+	 * to replicate across all the APs.
 	 * If we're doing that @reg is set to something special...
 	 */
-	if (reg != ~0U) 
-		mtrr_if->set(reg,base,size,type);
+	if (reg != ~0U)
+		mtrr_if->set(reg, base, size, type);
 
-	/* wait for the others */
-	while(atomic_read(&data.count))
+	/* Wait for the others */
+	while (atomic_read(&data.count))
 		cpu_relax();
 
 	atomic_set(&data.count, num_booting_cpus() - 1);
 	smp_wmb();
-	atomic_set(&data.gate,0);
+	atomic_set(&data.gate, 0);
 
 	/*
 	 * Wait here for everyone to have seen the gate change
 	 * So we're the last ones to touch 'data'
 	 */
-	while(atomic_read(&data.count))
+	while (atomic_read(&data.count))
 		cpu_relax();
 
 	local_irq_restore(flags);
 }
 
 /**
- *	mtrr_add_page - Add a memory type region
- *	@base: Physical base address of region in pages (in units of 4 kB!)
- *	@size: Physical size of region in pages (4 kB)
- *	@type: Type of MTRR desired
- *	@increment: If this is true do usage counting on the region
+ * mtrr_add_page - Add a memory type region
+ * @base: Physical base address of region in pages (in units of 4 kB!)
+ * @size: Physical size of region in pages (4 kB)
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
  *
- *	Memory type region registers control the caching on newer Intel and
- *	non Intel processors. This function allows drivers to request an
- *	MTRR is added. The details and hardware specifics of each processor's
- *	implementation are hidden from the caller, but nevertheless the 
- *	caller should expect to need to provide a power of two size on an
- *	equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
  *
- *	If the region cannot be added either because all regions are in use
- *	or the CPU cannot support it a negative value is returned. On success
- *	the register number for this entry is returned, but should be treated
- *	as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
  *
- *	On a multiprocessor machine the changes are made to all processors.
- *	This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
  *
- *	The available types are
+ * The available types are
  *
- *	%MTRR_TYPE_UNCACHABLE	-	No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
  *
- *	%MTRR_TYPE_WRBACK	-	Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
  *
- *	%MTRR_TYPE_WRCOMB	-	Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
  *
- *	%MTRR_TYPE_WRTHROUGH	-	Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
  *
- *	BUGS: Needs a quiet flag for the cases where drivers do not mind
- *	failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
  */
-
-int mtrr_add_page(unsigned long base, unsigned long size, 
+int mtrr_add_page(unsigned long base, unsigned long size,
 		  unsigned int type, bool increment)
 {
+	unsigned long lbase, lsize;
 	int i, replace, error;
 	mtrr_type ltype;
-	unsigned long lbase, lsize;
 
 	if (!mtrr_if)
 		return -ENXIO;
-		
-	if ((error = mtrr_if->validate_add_page(base,size,type)))
+
+	error = mtrr_if->validate_add_page(base, size, type);
+	if (error)
 		return error;
 
 	if (type >= MTRR_NUM_TYPES) {
-		printk(KERN_WARNING "mtrr: type: %u invalid\n", type);
+		pr_warning("mtrr: type: %u invalid\n", type);
 		return -EINVAL;
 	}
 
-	/*  If the type is WC, check that this processor supports it  */
+	/* If the type is WC, check that this processor supports it */
 	if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
-		printk(KERN_WARNING
-		       "mtrr: your processor doesn't support write-combining\n");
+		pr_warning("mtrr: your processor doesn't support write-combining\n");
 		return -ENOSYS;
 	}
 
 	if (!size) {
-		printk(KERN_WARNING "mtrr: zero sized request\n");
+		pr_warning("mtrr: zero sized request\n");
 		return -EINVAL;
 	}
 
 	if (base & size_or_mask || size & size_or_mask) {
-		printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n");
+		pr_warning("mtrr: base or size exceeds the MTRR width\n");
 		return -EINVAL;
 	}
 
@@ -341,36 +359,40 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 
 	/* No CPU hotplug when we change MTRR entries */
 	get_online_cpus();
-	/*  Search for existing MTRR  */
+
+	/* Search for existing MTRR  */
 	mutex_lock(&mtrr_mutex);
 	for (i = 0; i < num_var_ranges; ++i) {
 		mtrr_if->get(i, &lbase, &lsize, &ltype);
-		if (!lsize || base > lbase + lsize - 1 || base + size - 1 < lbase)
+		if (!lsize || base > lbase + lsize - 1 ||
+		    base + size - 1 < lbase)
 			continue;
-		/*  At this point we know there is some kind of overlap/enclosure  */
+		/*
+		 * At this point we know there is some kind of
+		 * overlap/enclosure
+		 */
 		if (base < lbase || base + size - 1 > lbase + lsize - 1) {
-			if (base <= lbase && base + size - 1 >= lbase + lsize - 1) {
+			if (base <= lbase &&
+			    base + size - 1 >= lbase + lsize - 1) {
 				/*  New region encloses an existing region  */
 				if (type == ltype) {
 					replace = replace == -1 ? i : -2;
 					continue;
-				}
-				else if (types_compatible(type, ltype))
+				} else if (types_compatible(type, ltype))
 					continue;
 			}
-			printk(KERN_WARNING
-			       "mtrr: 0x%lx000,0x%lx000 overlaps existing"
-			       " 0x%lx000,0x%lx000\n", base, size, lbase,
-			       lsize);
+			pr_warning("mtrr: 0x%lx000,0x%lx000 overlaps existing"
+				" 0x%lx000,0x%lx000\n", base, size, lbase,
+				lsize);
 			goto out;
 		}
-		/*  New region is enclosed by an existing region  */
+		/* New region is enclosed by an existing region */
 		if (ltype != type) {
 			if (types_compatible(type, ltype))
 				continue;
-			printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
-			     base, size, mtrr_attrib_to_str(ltype),
-			     mtrr_attrib_to_str(type));
+			pr_warning("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+				base, size, mtrr_attrib_to_str(ltype),
+				mtrr_attrib_to_str(type));
 			goto out;
 		}
 		if (increment)
@@ -378,7 +400,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 		error = i;
 		goto out;
 	}
-	/*  Search for an empty MTRR  */
+	/* Search for an empty MTRR */
 	i = mtrr_if->get_free_region(base, size, replace);
 	if (i >= 0) {
 		set_mtrr(i, base, size, type);
@@ -393,8 +415,9 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 				mtrr_usage_table[replace] = 0;
 			}
 		}
-	} else
-		printk(KERN_INFO "mtrr: no more MTRRs available\n");
+	} else {
+		pr_info("mtrr: no more MTRRs available\n");
+	}
 	error = i;
  out:
 	mutex_unlock(&mtrr_mutex);
@@ -405,10 +428,8 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 static int mtrr_check(unsigned long base, unsigned long size)
 {
 	if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
-		printk(KERN_WARNING
-			"mtrr: size and base must be multiples of 4 kiB\n");
-		printk(KERN_DEBUG
-			"mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
+		pr_warning("mtrr: size and base must be multiples of 4 kiB\n");
+		pr_debug("mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
 		dump_stack();
 		return -1;
 	}
@@ -416,66 +437,64 @@ static int mtrr_check(unsigned long base, unsigned long size)
 }
 
 /**
- *	mtrr_add - Add a memory type region
- *	@base: Physical base address of region
- *	@size: Physical size of region
- *	@type: Type of MTRR desired
- *	@increment: If this is true do usage counting on the region
+ * mtrr_add - Add a memory type region
+ * @base: Physical base address of region
+ * @size: Physical size of region
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
  *
- *	Memory type region registers control the caching on newer Intel and
- *	non Intel processors. This function allows drivers to request an
- *	MTRR is added. The details and hardware specifics of each processor's
- *	implementation are hidden from the caller, but nevertheless the 
- *	caller should expect to need to provide a power of two size on an
- *	equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
  *
- *	If the region cannot be added either because all regions are in use
- *	or the CPU cannot support it a negative value is returned. On success
- *	the register number for this entry is returned, but should be treated
- *	as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
  *
- *	On a multiprocessor machine the changes are made to all processors.
- *	This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
  *
- *	The available types are
+ * The available types are
  *
- *	%MTRR_TYPE_UNCACHABLE	-	No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
  *
- *	%MTRR_TYPE_WRBACK	-	Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
  *
- *	%MTRR_TYPE_WRCOMB	-	Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
  *
- *	%MTRR_TYPE_WRTHROUGH	-	Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
  *
- *	BUGS: Needs a quiet flag for the cases where drivers do not mind
- *	failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
  */
-
-int
-mtrr_add(unsigned long base, unsigned long size, unsigned int type,
-	 bool increment)
+int mtrr_add(unsigned long base, unsigned long size, unsigned int type,
+	     bool increment)
 {
 	if (mtrr_check(base, size))
 		return -EINVAL;
 	return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
 			     increment);
 }
+EXPORT_SYMBOL(mtrr_add);
 
 /**
- *	mtrr_del_page - delete a memory type region
- *	@reg: Register returned by mtrr_add
- *	@base: Physical base address
- *	@size: Size of region
+ * mtrr_del_page - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
  *
- *	If register is supplied then base and size are ignored. This is
- *	how drivers should call it.
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
  *
- *	Releases an MTRR region. If the usage count drops to zero the 
- *	register is freed and the region returns to default state.
- *	On success the register is returned, on failure a negative error
- *	code.
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
  */
-
 int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 {
 	int i, max;
@@ -500,22 +519,22 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 			}
 		}
 		if (reg < 0) {
-			printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base,
-			       size);
+			pr_debug("mtrr: no MTRR for %lx000,%lx000 found\n",
+				 base, size);
 			goto out;
 		}
 	}
 	if (reg >= max) {
-		printk(KERN_WARNING "mtrr: register: %d too big\n", reg);
+		pr_warning("mtrr: register: %d too big\n", reg);
 		goto out;
 	}
 	mtrr_if->get(reg, &lbase, &lsize, &ltype);
 	if (lsize < 1) {
-		printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg);
+		pr_warning("mtrr: MTRR %d not used\n", reg);
 		goto out;
 	}
 	if (mtrr_usage_table[reg] < 1) {
-		printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg);
+		pr_warning("mtrr: reg: %d has count=0\n", reg);
 		goto out;
 	}
 	if (--mtrr_usage_table[reg] < 1)
@@ -526,33 +545,31 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 	put_online_cpus();
 	return error;
 }
+
 /**
- *	mtrr_del - delete a memory type region
- *	@reg: Register returned by mtrr_add
- *	@base: Physical base address
- *	@size: Size of region
+ * mtrr_del - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
  *
- *	If register is supplied then base and size are ignored. This is
- *	how drivers should call it.
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
  *
- *	Releases an MTRR region. If the usage count drops to zero the 
- *	register is freed and the region returns to default state.
- *	On success the register is returned, on failure a negative error
- *	code.
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
  */
-
-int
-mtrr_del(int reg, unsigned long base, unsigned long size)
+int mtrr_del(int reg, unsigned long base, unsigned long size)
 {
 	if (mtrr_check(base, size))
 		return -EINVAL;
 	return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
 }
-
-EXPORT_SYMBOL(mtrr_add);
 EXPORT_SYMBOL(mtrr_del);
 
-/* HACK ALERT!
+/*
+ * HACK ALERT!
  * These should be called implicitly, but we can't yet until all the initcall
  * stuff is done...
  */
@@ -576,29 +593,28 @@ struct mtrr_value {
 
 static struct mtrr_value mtrr_value[MTRR_MAX_VAR_RANGES];
 
-static int mtrr_save(struct sys_device * sysdev, pm_message_t state)
+static int mtrr_save(struct sys_device *sysdev, pm_message_t state)
 {
 	int i;
 
 	for (i = 0; i < num_var_ranges; i++) {
-		mtrr_if->get(i,
-			     &mtrr_value[i].lbase,
-			     &mtrr_value[i].lsize,
-			     &mtrr_value[i].ltype);
+		mtrr_if->get(i, &mtrr_value[i].lbase,
+				&mtrr_value[i].lsize,
+				&mtrr_value[i].ltype);
 	}
 	return 0;
 }
 
-static int mtrr_restore(struct sys_device * sysdev)
+static int mtrr_restore(struct sys_device *sysdev)
 {
 	int i;
 
 	for (i = 0; i < num_var_ranges; i++) {
-		if (mtrr_value[i].lsize)
-			set_mtrr(i,
-				 mtrr_value[i].lbase,
-				 mtrr_value[i].lsize,
-				 mtrr_value[i].ltype);
+		if (mtrr_value[i].lsize) {
+			set_mtrr(i, mtrr_value[i].lbase,
+				    mtrr_value[i].lsize,
+				    mtrr_value[i].ltype);
+		}
 	}
 	return 0;
 }
@@ -615,26 +631,29 @@ int __initdata changed_by_mtrr_cleanup;
 /**
  * mtrr_bp_init - initialize mtrrs on the boot CPU
  *
- * This needs to be called early; before any of the other CPUs are 
+ * This needs to be called early; before any of the other CPUs are
  * initialized (i.e. before smp_init()).
- * 
+ *
  */
 void __init mtrr_bp_init(void)
 {
 	u32 phys_addr;
+
 	init_ifs();
 
 	phys_addr = 32;
 
 	if (cpu_has_mtrr) {
 		mtrr_if = &generic_mtrr_ops;
-		size_or_mask = 0xff000000;	/* 36 bits */
+		size_or_mask = 0xff000000;			/* 36 bits */
 		size_and_mask = 0x00f00000;
 		phys_addr = 36;
 
-		/* This is an AMD specific MSR, but we assume(hope?) that
-		   Intel will implement it to when they extend the address
-		   bus of the Xeon. */
+		/*
+		 * This is an AMD specific MSR, but we assume(hope?) that
+		 * Intel will implement it to when they extend the address
+		 * bus of the Xeon.
+		 */
 		if (cpuid_eax(0x80000000) >= 0x80000008) {
 			phys_addr = cpuid_eax(0x80000008) & 0xff;
 			/* CPUID workaround for Intel 0F33/0F34 CPU */
@@ -649,9 +668,11 @@ void __init mtrr_bp_init(void)
 			size_and_mask = ~size_or_mask & 0xfffff00000ULL;
 		} else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR &&
 			   boot_cpu_data.x86 == 6) {
-			/* VIA C* family have Intel style MTRRs, but
-			   don't support PAE */
-			size_or_mask = 0xfff00000;	/* 32 bits */
+			/*
+			 * VIA C* family have Intel style MTRRs,
+			 * but don't support PAE
+			 */
+			size_or_mask = 0xfff00000;		/* 32 bits */
 			size_and_mask = 0;
 			phys_addr = 32;
 		}
@@ -694,7 +715,6 @@ void __init mtrr_bp_init(void)
 				changed_by_mtrr_cleanup = 1;
 				mtrr_if->set_all();
 			}
-
 		}
 	}
 }
@@ -706,12 +726,17 @@ void mtrr_ap_init(void)
 	if (!mtrr_if || !use_intel())
 		return;
 	/*
-	 * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed,
-	 * but this routine will be called in cpu boot time, holding the lock
-	 * breaks it. This routine is called in two cases: 1.very earily time
-	 * of software resume, when there absolutely isn't mtrr entry changes;
-	 * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to
-	 * prevent mtrr entry changes
+	 * Ideally we should hold mtrr_mutex here to avoid mtrr entries
+	 * changed, but this routine will be called in cpu boot time,
+	 * holding the lock breaks it.
+	 *
+	 * This routine is called in two cases:
+	 *
+	 *   1. very earily time of software resume, when there absolutely
+	 *      isn't mtrr entry changes;
+	 *
+	 *   2. cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug
+	 *      lock to prevent mtrr entry changes
 	 */
 	local_irq_save(flags);
 
@@ -732,19 +757,23 @@ static int __init mtrr_init_finialize(void)
 {
 	if (!mtrr_if)
 		return 0;
+
 	if (use_intel()) {
 		if (!changed_by_mtrr_cleanup)
 			mtrr_state_warn();
-	} else {
-		/* The CPUs haven't MTRR and seem to not support SMP. They have
-		 * specific drivers, we use a tricky method to support
-		 * suspend/resume for them.
-		 * TBD: is there any system with such CPU which supports
-		 * suspend/resume?  if no, we should remove the code.
-		 */
-		sysdev_driver_register(&cpu_sysdev_class,
-			&mtrr_sysdev_driver);
+		return 0;
 	}
+
+	/*
+	 * The CPU has no MTRR and seems to not support SMP. They have
+	 * specific drivers, we use a tricky method to support
+	 * suspend/resume for them.
+	 *
+	 * TBD: is there any system with such CPU which supports
+	 * suspend/resume? If no, we should remove the code.
+	 */
+	sysdev_driver_register(&cpu_sysdev_class, &mtrr_sysdev_driver);
+
 	return 0;
 }
 subsys_initcall(mtrr_init_finialize);
-- 
cgit v1.2.3


From a79f0da80a508448434476b77f9d3d1a469eab67 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 3 Jul 2009 16:50:10 +0200
Subject: x86: atomic64: Inline atomic64_read() again

Now atomic64_read() is light weight (no register pressure and
small icache), we can inline it again.

Also use "=&A" constraint instead of "+A" to avoid warning
about unitialized 'res' variable. (gcc had to force 0 in eax/edx)

  $ size vmlinux.prev vmlinux.after
     text    data     bss     dec     hex filename
  4908667  451676 1684868 7045211  6b805b vmlinux.prev
  4908651  451676 1684868 7045195  6b804b vmlinux.after

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <4A4E1AA2.30002@gmail.com>
[ Also fix typo in atomic64_set() export ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/atomic_32.h | 22 ++++++++++++++++++++++
 arch/x86/lib/atomic64_32.c       | 23 +----------------------
 2 files changed, 23 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/atomic_32.h b/arch/x86/include/asm/atomic_32.h
index d7c8849b8c6..dc5a667ff79 100644
--- a/arch/x86/include/asm/atomic_32.h
+++ b/arch/x86/include/asm/atomic_32.h
@@ -295,6 +295,28 @@ extern void atomic64_set(atomic64_t *ptr, u64 new_val);
  *
  * Atomically reads the value of @ptr and returns it.
  */
+static inline u64 atomic64_read(atomic64_t *ptr)
+{
+	u64 res;
+
+	/*
+	 * Note, we inline this atomic64_t primitive because
+	 * it only clobbers EAX/EDX and leaves the others
+	 * untouched. We also (somewhat subtly) rely on the
+	 * fact that cmpxchg8b returns the current 64-bit value
+	 * of the memory location we are touching:
+	 */
+	asm volatile(
+		"mov %%ebx, %%eax\n\t"
+		"mov %%ecx, %%edx\n\t"
+		LOCK_PREFIX "cmpxchg8b %1\n"
+			: "=&A" (res)
+			: "m" (*ptr)
+		);
+
+	return res;
+}
+
 extern u64 atomic64_read(atomic64_t *ptr);
 
 /**
diff --git a/arch/x86/lib/atomic64_32.c b/arch/x86/lib/atomic64_32.c
index 1d98c9eb6ea..824fa0be55a 100644
--- a/arch/x86/lib/atomic64_32.c
+++ b/arch/x86/lib/atomic64_32.c
@@ -66,31 +66,10 @@ void atomic64_set(atomic64_t *ptr, u64 new_val)
 {
 	atomic64_xchg(ptr, new_val);
 }
-EXPORT_SYMBOL(atomic64_read);
+EXPORT_SYMBOL(atomic64_set);
 
 /**
- * atomic64_read - read atomic64 variable
- * @ptr:      pointer to type atomic64_t
- *
- * Atomically reads the value of @ptr and returns it.
- */
-u64 atomic64_read(atomic64_t *ptr)
-{
-	u64 res;
-
-	asm volatile(
-		"mov %%ebx, %%eax\n\t"
-		"mov %%ecx, %%edx\n\t"
-		LOCK_PREFIX "cmpxchg8b %1\n"
-			: "+A" (res)
-			: "m" (*ptr)
-		);
-
-	return res;
-}
 EXPORT_SYMBOL(atomic64_read);
-
-/**
  * atomic64_add_return - add and return
  * @delta: integer value to add
  * @ptr:   pointer to type atomic64_t
-- 
cgit v1.2.3


From 62edf5dc4a524e4cb525e6020b955a1ad593d9ba Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Sat, 4 Jul 2009 10:59:46 +0100
Subject: intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics
 drivers

We need to give people a little more time to fix the broken drivers.
Re-introduce this, but tied in properly with the 'iommu=pt' support this
time. Change the config option name and make it default to 'no' too.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/x86/Kconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c07f7220590..738bdc6b0f8 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1913,6 +1913,18 @@ config DMAR_DEFAULT_ON
 	  recommended you say N here while the DMAR code remains
 	  experimental.
 
+config DMAR_BROKEN_GFX_WA
+	def_bool n
+	prompt "Workaround broken graphics drivers (going away soon)"
+	depends on DMAR
+	---help---
+	  Current Graphics drivers tend to use physical address
+	  for DMA and avoid using DMA APIs. Setting this config
+	  option permits the IOMMU driver to set a unity map for
+	  all the OS-visible memory. Hence the driver can continue
+	  to use physical addresses for DMA, at least until this
+	  option is removed in the 2.6.32 kernel.
+
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
-- 
cgit v1.2.3


From 9731f4a202f29ff402ea2ddad7ff6f3a559c0c82 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 3 Jul 2009 09:40:03 +0000
Subject: sh: add r8a66597 usb0 host to the se7724 board

Add USB host support for port CN27 on the Solution Engine 7724
board. The r8a66597-hcd driver is hooked up as a platform device
and some registers are configured to enable the USB host function.
The hardware driving the USB port is the on-chip USB0 block in
the sh7724 processor configured as USB host controller.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 38 +++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index c050a8d76df..8fed45a2fb8 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,6 +19,7 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
@@ -302,6 +303,34 @@ static struct platform_device sh_eth_device = {
 	.resource = sh_eth_resources,
 };
 
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d800ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -311,6 +340,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&ceu1_device,
 	&keysc_device,
 	&sh_eth_device,
+	&sh7724_usb0_host_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -364,6 +394,7 @@ static void __init sh_eth_init(void)
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
 
 #define SW41_A    0x0100
 #define SW41_B    0x0200
@@ -373,6 +404,7 @@ static void __init sh_eth_init(void)
 #define SW41_F    0x2000
 #define SW41_G    0x4000
 #define SW41_H    0x8000
+
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
@@ -385,6 +417,12 @@ static int __init devices_setup(void)
 		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
+	/* turn on USB clocks, use external clock */
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* enable USB0 port */
+	ctrl_outw(0x0600, 0xa40501d4);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
-- 
cgit v1.2.3


From 79714acbab080ad351acf4bba9a2bbc21d65c93c Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 3 Jul 2009 10:08:05 +0000
Subject: sh: hwblk base implementation

This patch is the hwblk base implementation, containing
structures and shared functions dealing with hardware blocks.

A each processor model should provide a list of hwblks and
describe which module stop bit that is associated with each
hwblck and how the hwblks are grouped together into areas.

The shared code keeps track of the usage count for each
hwblk and the areas. Fallback implementations for processor
specific code are also kept as weak symbols.

The clock framework, the runtime pm code and cpuidle will
all tie into this hwblk implementation.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/hwblk.h |  61 +++++++++++++++++++++
 arch/sh/kernel/cpu/Makefile |   2 +-
 arch/sh/kernel/cpu/hwblk.c  | 130 ++++++++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/time.c       |   2 +
 4 files changed, 194 insertions(+), 1 deletion(-)
 create mode 100644 arch/sh/include/asm/hwblk.h
 create mode 100644 arch/sh/kernel/cpu/hwblk.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/hwblk.h b/arch/sh/include/asm/hwblk.h
new file mode 100644
index 00000000000..51a46f49663
--- /dev/null
+++ b/arch/sh/include/asm/hwblk.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_SH_HWBLK_H
+#define __ASM_SH_HWBLK_H
+
+#include <asm/clock.h>
+#include <asm/io.h>
+
+#define HWBLK_AREA_FLAG_PARENT (1 << 0) /* valid parent */
+
+#define HWBLK_AREA(_flags, _parent)		\
+{						\
+	.flags = _flags,			\
+	.parent = _parent,			\
+}
+
+struct hwblk_area {
+	unsigned long cnt;
+	unsigned char parent;
+	unsigned char flags;
+};
+
+#define HWBLK(_mstp, _bit, _area)		\
+{						\
+	.mstp = (void __iomem *)_mstp,		\
+	.bit = _bit,				\
+	.area = _area,				\
+}
+
+struct hwblk {
+	void __iomem *mstp;
+	unsigned char bit;
+	unsigned char area;
+	unsigned long cnt;
+};
+
+struct hwblk_info {
+	struct hwblk_area *areas;
+	int nr_areas;
+	struct hwblk *hwblks;
+	int nr_hwblks;
+};
+
+/* Should be defined by processor-specific code */
+int arch_hwblk_init(void);
+int arch_hwblk_sleep_mode(void);
+
+int hwblk_register(struct hwblk_info *info);
+int hwblk_init(void);
+
+/* allow clocks to enable and disable hardware blocks */
+#define SH_HWBLK_CLK(_name, _id, _parent, _hwblk, _flags)	\
+{							\
+	.name		= _name,			\
+	.id		= _id,				\
+	.parent		= _parent,			\
+	.arch_flags	= _hwblk,			\
+	.flags		= _flags,			\
+}
+
+int sh_hwblk_clk_register(struct clk *clks, int nr);
+
+#endif /* __ASM_SH_HWBLK_H */
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index eecad7cbd61..3d6b9312dc4 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -19,4 +19,4 @@ obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o
 obj-$(CONFIG_SH_CLK_CPG)	+= clock-cpg.o
 
-obj-y	+= irq/ init.o clock.o
+obj-y	+= irq/ init.o clock.o hwblk.o
diff --git a/arch/sh/kernel/cpu/hwblk.c b/arch/sh/kernel/cpu/hwblk.c
new file mode 100644
index 00000000000..7c3a73deff2
--- /dev/null
+++ b/arch/sh/kernel/cpu/hwblk.c
@@ -0,0 +1,130 @@
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <asm/clock.h>
+
+static DEFINE_SPINLOCK(hwblk_lock);
+
+static void hwblk_area_inc(struct hwblk_info *info, int area)
+{
+	struct hwblk_area *hap = info->areas + area;
+
+	hap->cnt++;
+	if (hap->cnt == 1)
+		if (hap->flags & HWBLK_AREA_FLAG_PARENT)
+			hwblk_area_inc(info, hap->parent);
+}
+
+static void hwblk_area_dec(struct hwblk_info *info, int area)
+{
+	struct hwblk_area *hap = info->areas + area;
+
+	if (hap->cnt == 1)
+		if (hap->flags & HWBLK_AREA_FLAG_PARENT)
+			hwblk_area_dec(info, hap->parent);
+	hap->cnt--;
+}
+
+static void hwblk_enable(struct hwblk_info *info, int hwblk)
+{
+	struct hwblk *hp = info->hwblks + hwblk;
+	unsigned long tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hwblk_lock, flags);
+
+	hp->cnt++;
+	if (hp->cnt == 1) {
+		hwblk_area_inc(info, hp->area);
+
+		tmp = __raw_readl(hp->mstp);
+		tmp &= ~(1 << hp->bit);
+		__raw_writel(tmp, hp->mstp);
+	}
+
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+static void hwblk_disable(struct hwblk_info *info, int hwblk)
+{
+	struct hwblk *hp = info->hwblks + hwblk;
+	unsigned long tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&hwblk_lock, flags);
+
+	if (hp->cnt == 1) {
+		hwblk_area_dec(info, hp->area);
+
+		tmp = __raw_readl(hp->mstp);
+		tmp |= 1 << hp->bit;
+		__raw_writel(tmp, hp->mstp);
+	}
+	hp->cnt--;
+
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+static struct hwblk_info *hwblk_info;
+
+int __init hwblk_register(struct hwblk_info *info)
+{
+	hwblk_info = info;
+	return 0;
+}
+
+int __init __weak arch_hwblk_init(void)
+{
+	return 0;
+}
+
+int __weak arch_hwblk_sleep_mode(void)
+{
+	return SUSP_SH_SLEEP;
+}
+
+int __init hwblk_init(void)
+{
+	return arch_hwblk_init();
+}
+
+/* allow clocks to enable and disable hardware blocks */
+static int sh_hwblk_clk_enable(struct clk *clk)
+{
+	if (!hwblk_info)
+		return -ENOENT;
+
+	hwblk_enable(hwblk_info, clk->arch_flags);
+	return 0;
+}
+
+static void sh_hwblk_clk_disable(struct clk *clk)
+{
+	if (hwblk_info)
+		hwblk_disable(hwblk_info, clk->arch_flags);
+}
+
+static struct clk_ops sh_hwblk_clk_ops = {
+	.enable		= sh_hwblk_clk_enable,
+	.disable	= sh_hwblk_clk_disable,
+	.recalc		= followparent_recalc,
+};
+
+int __init sh_hwblk_clk_register(struct clk *clks, int nr)
+{
+	struct clk *clkp;
+	int ret = 0;
+	int k;
+
+	for (k = 0; !ret && (k < nr); k++) {
+		clkp = clks + k;
+		clkp->ops = &sh_hwblk_clk_ops;
+		ret |= clk_register(clkp);
+	}
+
+	return ret;
+}
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 9b352a1e3fb..d2424b068b7 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/rtc.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
 #include <asm/rtc.h>
 
 /* Dummy RTC ops */
@@ -96,6 +97,7 @@ void __init time_init(void)
 	if (board_time_init)
 		board_time_init();
 
+	hwblk_init();
 	clk_init();
 
 	rtc_sh_get_time(&xtime);
-- 
cgit v1.2.3


From a61c1a636628a28ab5b42a9d36582a8f6a08893a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 3 Jul 2009 10:15:25 +0000
Subject: sh: hwblk for sh7722

This patch contains the sh7722 specific hwblk implementation.

Hwblk ids are added to the processor specific header file,
module stop bits and areas are kept track of as hwblks,
clocks are converted to make use of the shared hwblk code.
Code to determine allowed sleep modes is also added.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/cpu-sh4/cpu/sh7722.h   |  14 +++++
 arch/sh/kernel/cpu/sh4a/Makefile       |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7722.c |  60 ++++++++++---------
 arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c | 106 +++++++++++++++++++++++++++++++++
 4 files changed, 153 insertions(+), 29 deletions(-)
 create mode 100644 arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c

(limited to 'arch')

diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h
index 738ea43c503..48560407cbe 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7722.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h
@@ -221,4 +221,18 @@ enum {
 	GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYOUT5_IN5,
 };
 
+enum {
+	HWBLK_UNKNOWN = 0,
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_URAM, HWBLK_XYMEM,
+	HWBLK_INTC, HWBLK_DMAC, HWBLK_SHYWAY, HWBLK_HUDI,
+	HWBLK_UBC, HWBLK_TMU, HWBLK_CMT, HWBLK_RWDT, HWBLK_FLCTL,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SIO,
+	HWBLK_SIOF0, HWBLK_SIOF1, HWBLK_IIC, HWBLK_RTC,
+	HWBLK_TPU, HWBLK_IRDA, HWBLK_SDHI, HWBLK_SIM, HWBLK_KEYSC,
+	HWBLK_TSIF, HWBLK_USBF, HWBLK_2DG, HWBLK_SIU, HWBLK_VOU,
+	HWBLK_JPU, HWBLK_BEU, HWBLK_CEU, HWBLK_VEU, HWBLK_VPU,
+	HWBLK_LCDC,
+	HWBLK_NR,
+};
+
 #endif /* __ASM_SH7722_H__ */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index ebdd391d5f4..3cafda69637 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -25,7 +25,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o hwblk-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7366.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 40f859354f7..1fa9e1dd1cc 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7722.h>
 
 /* SH7722 registers */
 #define FRQCR		0xa4150000
@@ -140,35 +142,37 @@ struct clk div6_clks[] = {
 	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _flags) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags)
+#define R_CLK &r_clk
+#define P_CLK &div4_clks[DIV4_P]
+#define B_CLK &div4_clks[DIV4_B]
+#define U_CLK &div4_clks[DIV4_U]
 
 static struct clk mstp_clks[] = {
-	MSTP("uram0", &div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT),
-	MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0),
-	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0),
-
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0),
-	MSTP("rtc0", &r_clk, MSTPCR1, 8, 0),
-
-	MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0),
-	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0),
-	MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0),
-	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 9, 0),
-	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0),
-	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0),
+	SH_HWBLK_CLK("uram0", -1, U_CLK, HWBLK_URAM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("xymem0", -1, B_CLK, HWBLK_XYMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU, 0),
+	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
+	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
+	SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0),
+	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
+	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
+	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
+
+	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0),
+	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
+
+	SH_HWBLK_CLK("sdhi0", -1, P_CLK, HWBLK_SDHI, 0),
+	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
+	SH_HWBLK_CLK("usbf0", -1, P_CLK, HWBLK_USBF, 0),
+	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
+	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
+	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
+	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
+	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("lcdc0", -1, P_CLK, HWBLK_LCDC, 0),
 };
 
 int __init arch_clk_init(void)
@@ -191,7 +195,7 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
new file mode 100644
index 00000000000..00a1c02d82b
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
@@ -0,0 +1,106 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
+ *
+ * SH7722 hardware block support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7722.h>
+
+/* SH7722 registers */
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+
+/* SH7722 Power Domains */
+enum { CORE_AREA, SUB_AREA, CORE_AREA_BM };
+static struct hwblk_area sh7722_hwblk_area[] = {
+	[CORE_AREA] = HWBLK_AREA(0, 0),
+	[CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA),
+	[SUB_AREA] = HWBLK_AREA(0, 0),
+};
+
+/* Table mapping HWBLK to Module Stop Bit and Power Domain */
+static struct hwblk sh7722_hwblk[HWBLK_NR] = {
+	[HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA),
+	[HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA),
+	[HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA),
+	[HWBLK_URAM] = HWBLK(MSTPCR0, 28, CORE_AREA),
+	[HWBLK_XYMEM] = HWBLK(MSTPCR0, 26, CORE_AREA),
+	[HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA),
+	[HWBLK_DMAC] = HWBLK(MSTPCR0, 21, CORE_AREA_BM),
+	[HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA),
+	[HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA),
+	[HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA),
+	[HWBLK_TMU] = HWBLK(MSTPCR0, 15, CORE_AREA),
+	[HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA),
+	[HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA),
+	[HWBLK_FLCTL] = HWBLK(MSTPCR0, 10, CORE_AREA),
+	[HWBLK_SCIF0] = HWBLK(MSTPCR0, 7, CORE_AREA),
+	[HWBLK_SCIF1] = HWBLK(MSTPCR0, 6, CORE_AREA),
+	[HWBLK_SCIF2] = HWBLK(MSTPCR0, 5, CORE_AREA),
+	[HWBLK_SIO] = HWBLK(MSTPCR0, 3, CORE_AREA),
+	[HWBLK_SIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA),
+	[HWBLK_SIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA),
+
+	[HWBLK_IIC] = HWBLK(MSTPCR1, 9, CORE_AREA),
+	[HWBLK_RTC] = HWBLK(MSTPCR1, 8, SUB_AREA),
+
+	[HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA),
+	[HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA),
+	[HWBLK_SDHI] = HWBLK(MSTPCR2, 18, CORE_AREA),
+	[HWBLK_SIM] = HWBLK(MSTPCR2, 16, CORE_AREA),
+	[HWBLK_KEYSC] = HWBLK(MSTPCR2, 14, SUB_AREA),
+	[HWBLK_TSIF] = HWBLK(MSTPCR2, 13, SUB_AREA),
+	[HWBLK_USBF] = HWBLK(MSTPCR2, 11, CORE_AREA),
+	[HWBLK_2DG] = HWBLK(MSTPCR2, 9, CORE_AREA_BM),
+	[HWBLK_SIU] = HWBLK(MSTPCR2, 8, CORE_AREA),
+	[HWBLK_JPU] = HWBLK(MSTPCR2, 6, CORE_AREA_BM),
+	[HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM),
+	[HWBLK_BEU] = HWBLK(MSTPCR2, 4, CORE_AREA_BM),
+	[HWBLK_CEU] = HWBLK(MSTPCR2, 3, CORE_AREA_BM),
+	[HWBLK_VEU] = HWBLK(MSTPCR2, 2, CORE_AREA_BM),
+	[HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM),
+	[HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM),
+};
+
+static struct hwblk_info sh7722_hwblk_info = {
+	.areas = sh7722_hwblk_area,
+	.nr_areas = ARRAY_SIZE(sh7722_hwblk_area),
+	.hwblks = sh7722_hwblk,
+	.nr_hwblks = ARRAY_SIZE(sh7722_hwblk),
+};
+
+int arch_hwblk_sleep_mode(void)
+{
+	if (!sh7722_hwblk_area[CORE_AREA].cnt)
+		return SUSP_SH_STANDBY | SUSP_SH_SF;
+
+	if (!sh7722_hwblk_area[CORE_AREA_BM].cnt)
+		return SUSP_SH_SLEEP | SUSP_SH_SF;
+
+	return SUSP_SH_SLEEP;
+}
+
+int __init arch_hwblk_init(void)
+{
+	return hwblk_register(&sh7722_hwblk_info);
+}
-- 
cgit v1.2.3


From 7426394f20c2e74b7c560bcd266cec1b327a269b Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 3 Jul 2009 10:28:00 +0000
Subject: sh: cpuidle for SuperH Mobile using hwblk

This patch adds cpuidle support for SuperH Mobile.

The sleep mode selected by cpuidle is compared with
the mode selected by the hwblk sleep code and the
best allowed mode is entered.

At this point "Sleep mode" and "Sleep mode + SF" are
supported. This code can easily be extended to support
"Software suspend mode", but the assembly code must
first be updated to avoid loosing interrupts.

Also, update the code to only copy the assembly snippet
into internal memory once at bootup.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/suspend.h         |   9 +++
 arch/sh/kernel/cpu/shmobile/Makefile  |   1 +
 arch/sh/kernel/cpu/shmobile/cpuidle.c | 102 ++++++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/shmobile/pm.c      |  26 ++++-----
 4 files changed, 125 insertions(+), 13 deletions(-)
 create mode 100644 arch/sh/kernel/cpu/shmobile/cpuidle.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index b1b995370e7..5c8ea28ff7a 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -10,6 +10,15 @@ struct swsusp_arch_regs {
 	struct pt_regs user_regs;
 	unsigned long bank1_regs[8];
 };
+
+void sh_mobile_call_standby(unsigned long mode);
+
+#ifdef CONFIG_CPU_IDLE
+void sh_mobile_setup_cpuidle(void);
+#else
+static inline void sh_mobile_setup_cpuidle(void) {}
+#endif
+
 #endif
 
 /* flags passed to assembly suspend code */
diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
index 08bfa7c7db2..e8a5111e848 100644
--- a/arch/sh/kernel/cpu/shmobile/Makefile
+++ b/arch/sh/kernel/cpu/shmobile/Makefile
@@ -4,3 +4,4 @@
 
 # Power Management & Sleep mode
 obj-$(CONFIG_PM)	+= pm.o sleep.o
+obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
new file mode 100644
index 00000000000..4afdd975cc6
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -0,0 +1,102 @@
+/*
+ * arch/sh/kernel/cpu/shmobile/cpuidle.c
+ *
+ * Cpuidle support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <linux/cpuidle.h>
+#include <asm/suspend.h>
+#include <asm/uaccess.h>
+#include <asm/hwblk.h>
+
+static unsigned long cpuidle_mode[] = {
+	SUSP_SH_SLEEP, /* regular sleep mode */
+	SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
+};
+
+static int cpuidle_sleep_enter(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	unsigned long allowed_mode = arch_hwblk_sleep_mode();
+	ktime_t before, after;
+	int requested_state = state - &dev->states[0];
+	int allowed_state;
+	int k;
+
+	/* convert allowed mode to allowed state */
+	for (k = ARRAY_SIZE(cpuidle_mode) - 1; k > 0; k--)
+		if (cpuidle_mode[k] == allowed_mode)
+			break;
+
+	allowed_state = k;
+
+	/* take the following into account for sleep mode selection:
+	 * - allowed_state: best mode allowed by hardware (clock deps)
+	 * - requested_state: best mode allowed by software (latencies)
+	 */
+	k = min_t(int, allowed_state, requested_state);
+
+	dev->last_state = &dev->states[k];
+	before = ktime_get();
+	sh_mobile_call_standby(cpuidle_mode[k]);
+	after = ktime_get();
+	return ktime_to_ns(ktime_sub(after, before)) >> 10;
+}
+
+static struct cpuidle_device cpuidle_dev;
+static struct cpuidle_driver cpuidle_driver = {
+	.name =		"sh_idle",
+	.owner =	THIS_MODULE,
+};
+
+void sh_mobile_setup_cpuidle(void)
+{
+	struct cpuidle_device *dev = &cpuidle_dev;
+	struct cpuidle_state *state;
+	int i;
+
+	cpuidle_register_driver(&cpuidle_driver);
+
+	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
+		dev->states[i].name[0] = '\0';
+		dev->states[i].desc[0] = '\0';
+	}
+
+	i = CPUIDLE_DRIVER_STATE_START;
+
+	state = &dev->states[i++];
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
+	strncpy(state->desc, "SuperH Sleep Mode", CPUIDLE_DESC_LEN);
+	state->exit_latency = 1;
+	state->target_residency = 1 * 2;
+	state->power_usage = 3;
+	state->flags = 0;
+	state->flags |= CPUIDLE_FLAG_SHALLOW;
+	state->flags |= CPUIDLE_FLAG_TIME_VALID;
+	state->enter = cpuidle_sleep_enter;
+
+	dev->safe_state = state;
+
+	state = &dev->states[i++];
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
+	strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN);
+	state->exit_latency = 100;
+	state->target_residency = 1 * 2;
+	state->power_usage = 1;
+	state->flags = 0;
+	state->flags |= CPUIDLE_FLAG_TIME_VALID;
+	state->enter = cpuidle_sleep_enter;
+
+	dev->state_count = i;
+
+	cpuidle_register_device(dev);
+}
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index 8c067adf683..de078d24ce5 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
+ * arch/sh/kernel/cpu/shmobile/pm.c
  *
  * Power management support code for SuperH Mobile
  *
@@ -32,20 +32,17 @@
  *
  * R-standby mode is unsupported, but will be added in the future
  * U-standby mode is low priority since it needs bootloader hacks
- *
- * All modes should be tied in with cpuidle. But before that can
- * happen we need to keep track of enabled hardware blocks so we
- * can avoid entering sleep modes that stop clocks to hardware
- * blocks that are in use even though the cpu core is idle.
  */
 
+#define ILRAM_BASE 0xe5200000
+
 extern const unsigned char sh_mobile_standby[];
 extern const unsigned int sh_mobile_standby_size;
 
-static void sh_mobile_call_standby(unsigned long mode)
+void sh_mobile_call_standby(unsigned long mode)
 {
 	extern void *vbr_base;
-	void *onchip_mem = (void *)0xe5200000; /* ILRAM */
+	void *onchip_mem = (void *)ILRAM_BASE;
 	void (*standby_onchip_mem)(unsigned long) = onchip_mem;
 
 	/* Note: Wake up from sleep may generate exceptions!
@@ -55,11 +52,6 @@ static void sh_mobile_call_standby(unsigned long mode)
 	if (mode & SUSP_SH_SF)
 		asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
 
-	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
-	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
-	wmb();
-	ctrl_barrier();
-
 	/* Let assembly snippet in on-chip memory handle the rest */
 	standby_onchip_mem(mode);
 
@@ -85,7 +77,15 @@ static struct platform_suspend_ops sh_pm_ops = {
 
 static int __init sh_pm_init(void)
 {
+	void *onchip_mem = (void *)ILRAM_BASE;
+
+	/* Copy the assembly snippet to the otherwise ununsed ILRAM */
+	memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
+	wmb();
+	ctrl_barrier();
+
 	suspend_set_ops(&sh_pm_ops);
+	sh_mobile_setup_cpuidle();
 	return 0;
 }
 
-- 
cgit v1.2.3


From 5084f61a4d6c9c7bfd3be07fbb5253c1a08cd568 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Fri, 3 Jul 2009 23:34:51 +0100
Subject: sh: Use bootmem ontop of lmb for NUMA

Like the UP case, use lmb as the foundation of memory resource
management on NUMA.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/numa.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 095d93bec7c..9b784fdb947 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -9,6 +9,7 @@
  */
 #include <linux/module.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
 #include <linux/mm.h>
 #include <linux/numa.h>
 #include <linux/pfn.h>
@@ -26,6 +27,15 @@ EXPORT_SYMBOL_GPL(node_data);
 void __init setup_memory(void)
 {
 	unsigned long free_pfn = PFN_UP(__pa(_end));
+	u64 base = min_low_pfn << PAGE_SHIFT;
+	u64 size = (max_low_pfn << PAGE_SHIFT) - min_low_pfn;
+
+	lmb_add(base, size);
+
+	/* Reserve the LMB regions used by the kernel, initrd, etc.. */
+	lmb_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
+		    (PFN_PHYS(free_pfn) + PAGE_SIZE - 1) -
+		    (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
 
 	/*
 	 * Node 0 sets up its pgdat at the first available pfn,
@@ -45,24 +55,23 @@ void __init setup_memory(void)
 
 void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 {
-	unsigned long bootmap_pages, bootmap_start, bootmap_size;
-	unsigned long start_pfn, free_pfn, end_pfn;
+	unsigned long bootmap_pages;
+	unsigned long start_pfn, end_pfn;
+	unsigned long bootmem_paddr;
 
 	/* Don't allow bogus node assignment */
 	BUG_ON(nid > MAX_NUMNODES || nid == 0);
 
-	/*
-	 * The free pfn starts at the beginning of the range, and is
-	 * advanced as necessary for pgdat and node map allocations.
-	 */
-	free_pfn = start_pfn = start >> PAGE_SHIFT;
+	start_pfn = start >> PAGE_SHIFT;
 	end_pfn = end >> PAGE_SHIFT;
 
+	lmb_add(start, end - start);
+
 	__add_active_range(nid, start_pfn, end_pfn);
 
 	/* Node-local pgdat */
-	NODE_DATA(nid) = pfn_to_kaddr(free_pfn);
-	free_pfn += PFN_UP(sizeof(struct pglist_data));
+	NODE_DATA(nid) = __va(lmb_alloc_base(sizeof(struct pglist_data),
+					     SMP_CACHE_BYTES, end_pfn));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
 	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
@@ -71,16 +80,17 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 
 	/* Node-local bootmap */
 	bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	bootmap_start = (unsigned long)pfn_to_kaddr(free_pfn);
-	bootmap_size = init_bootmem_node(NODE_DATA(nid), free_pfn, start_pfn,
-				    end_pfn);
+	bootmem_paddr = lmb_alloc_base(bootmap_pages << PAGE_SHIFT,
+				       PAGE_SIZE, end_pfn);
+	init_bootmem_node(NODE_DATA(nid), bootmem_paddr >> PAGE_SHIFT,
+			  start_pfn, end_pfn);
 
 	free_bootmem_with_active_regions(nid, end_pfn);
 
 	/* Reserve the pgdat and bootmap space with the bootmem allocator */
 	reserve_bootmem_node(NODE_DATA(nid), start_pfn << PAGE_SHIFT,
 			     sizeof(struct pglist_data), BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(nid), free_pfn << PAGE_SHIFT,
+	reserve_bootmem_node(NODE_DATA(nid), bootmem_paddr,
 			     bootmap_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
 
 	/* It's up */
-- 
cgit v1.2.3


From c63c3105e4991b2991ba73a742b8b59bfdbe4acd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 5 Jul 2009 02:50:10 +0900
Subject: sh: use kprobes_built_in() for notify_page_fault().

Kill off the KPROBES ifdef, as per x86.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/fault_32.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 71925946f1e..ce75b8882ef 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -25,14 +25,12 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap)
 {
 	int ret = 0;
 
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
+	if (kprobes_built_in() && !user_mode(regs)) {
 		preempt_disable();
 		if (kprobe_running() && kprobe_fault_handler(regs, trap))
 			ret = 1;
 		preempt_enable();
 	}
-#endif
 
 	return ret;
 }
-- 
cgit v1.2.3


From 0f60bb25b4036d30fd795709be09626c58c52464 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 5 Jul 2009 03:18:47 +0900
Subject: sh: Tidy up vmalloc fault handling.

This rewrites the vmalloc fault handling as per x86, which subsequently
allows for easy future tie-in for vmalloc_sync_all().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/fault_32.c | 153 ++++++++++++++++++++++++++++++++------------------
 1 file changed, 97 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index ce75b8882ef..08d0117d90f 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -2,7 +2,7 @@
  * Page fault handler for SH with an MMU.
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2003 - 2008  Paul Mundt
+ *  Copyright (C) 2003 - 2009  Paul Mundt
  *
  *  Based on linux/arch/i386/mm/fault.c:
  *   Copyright (C) 1995  Linus Torvalds
@@ -35,6 +35,74 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap)
 	return ret;
 }
 
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
+{
+	unsigned index = pgd_index(address);
+	pgd_t *pgd_k;
+	pud_t *pud, *pud_k;
+	pmd_t *pmd, *pmd_k;
+
+	pgd += index;
+	pgd_k = init_mm.pgd + index;
+
+	if (!pgd_present(*pgd_k))
+		return NULL;
+
+	pud = pud_offset(pgd, address);
+	pud_k = pud_offset(pgd_k, address);
+	if (!pud_present(*pud_k))
+		return NULL;
+
+	pmd = pmd_offset(pud, address);
+	pmd_k = pmd_offset(pud_k, address);
+	if (!pmd_present(*pmd_k))
+		return NULL;
+
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, *pmd_k);
+	else
+		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+
+	return pmd_k;
+}
+
+/*
+ * Handle a fault on the vmalloc or module mapping area
+ */
+static noinline int vmalloc_fault(unsigned long address)
+{
+	pgd_t *pgd_k;
+	pmd_t *pmd_k;
+	pte_t *pte_k;
+
+	/* Make sure we are in vmalloc area: */
+	if (!(address >= VMALLOC_START && address < VMALLOC_END))
+		return -1;
+
+	/*
+	 * Synchronize this task's top level page-table
+	 * with the 'reference' page table.
+	 *
+	 * Do _not_ use "current" here. We might be inside
+	 * an interrupt in the middle of a task switch..
+	 */
+	pgd_k = get_TTB();
+	pmd_k = vmalloc_sync_one(__va((unsigned long)pgd_k), address);
+	if (!pmd_k)
+		return -1;
+
+	pte_k = pte_offset_kernel(pmd_k, address);
+	if (!pte_present(*pte_k))
+		return -1;
+
+	return 0;
+}
+
+static int fault_in_kernel_space(unsigned long address)
+{
+	return address >= TASK_SIZE;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -44,6 +112,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 					unsigned long writeaccess,
 					unsigned long address)
 {
+	unsigned long vec;
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	struct vm_area_struct * vma;
@@ -51,59 +120,30 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	int fault;
 	siginfo_t info;
 
-	/*
-	 * We don't bother with any notifier callbacks here, as they are
-	 * all handled through the __do_page_fault() fast-path.
-	 */
-
 	tsk = current;
+	mm = tsk->mm;
 	si_code = SEGV_MAPERR;
+	vec = lookup_exception_vector();
 
-	if (unlikely(address >= TASK_SIZE)) {
-		/*
-		 * Synchronize this task's top level page-table
-		 * with the 'reference' page table.
-		 *
-		 * Do _not_ use "tsk" here. We might be inside
-		 * an interrupt in the middle of a task switch..
-		 */
-		int offset = pgd_index(address);
-		pgd_t *pgd, *pgd_k;
-		pud_t *pud, *pud_k;
-		pmd_t *pmd, *pmd_k;
-
-		pgd = get_TTB() + offset;
-		pgd_k = swapper_pg_dir + offset;
-
-		if (!pgd_present(*pgd)) {
-			if (!pgd_present(*pgd_k))
-				goto bad_area_nosemaphore;
-			set_pgd(pgd, *pgd_k);
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 */
+	if (unlikely(fault_in_kernel_space(address))) {
+		if (vmalloc_fault(address) >= 0)
 			return;
-		}
-
-		pud = pud_offset(pgd, address);
-		pud_k = pud_offset(pgd_k, address);
-
-		if (!pud_present(*pud)) {
-			if (!pud_present(*pud_k))
-				goto bad_area_nosemaphore;
-			set_pud(pud, *pud_k);
+		if (notify_page_fault(regs, vec))
 			return;
-		}
-
-		pmd = pmd_offset(pud, address);
-		pmd_k = pmd_offset(pud_k, address);
-		if (pmd_present(*pmd) || !pmd_present(*pmd_k))
-			goto bad_area_nosemaphore;
-		set_pmd(pmd, *pmd_k);
 
-		return;
+		goto bad_area_nosemaphore;
 	}
 
-	mm = tsk->mm;
-
-	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+	if (unlikely(notify_page_fault(regs, vec)))
 		return;
 
 	/* Only enable interrupts if they were on before the fault */
@@ -113,8 +153,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
-	 * If we're in an interrupt or have no user
-	 * context, we must not take the fault..
+	 * If we're in an interrupt, have no user context or are running
+	 * in an atomic region then we must not take the fault:
 	 */
 	if (in_atomic() || !mm)
 		goto no_context;
@@ -130,10 +170,11 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		goto bad_area;
 	if (expand_stack(vma, address))
 		goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
 good_area:
 	si_code = SEGV_ACCERR;
 	if (writeaccess) {
@@ -171,10 +212,10 @@ survive:
 	up_read(&mm->mmap_sem);
 	return;
 
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
 bad_area:
 	up_read(&mm->mmap_sem);
 
-- 
cgit v1.2.3


From febe04de3be4bf66f9339d8847db2806d99fd164 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 1 Jul 2009 11:13:07 +0900
Subject: x86: fix usage of bios intcall()

Some intcall() misuses the input biosregs as output in
cf06de7b9cdd3efee7a59dced1977b3c21d43732

This fixes the problem vga=ask boot option doesn't show enough modes.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090701021307.GA3127@localhost.localdomain>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/video-bios.c | 3 +--
 arch/x86/boot/video-vesa.c | 4 ++--
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index d660be49236..49e0c18833e 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -37,14 +37,13 @@ static int set_bios_mode(u8 mode)
 	ireg.al = mode;		/* AH=0x00 Set Video Mode */
 	intcall(0x10, &ireg, NULL);
 
-
 	ireg.ah = 0x0f;		/* Get Current Video Mode */
 	intcall(0x10, &ireg, &oreg);
 
 	do_restore = 1;		/* Assume video contents were lost */
 
 	/* Not all BIOSes are clean with the top bit */
-	new_mode = ireg.al & 0x7f;
+	new_mode = oreg.al & 0x7f;
 
 	if (new_mode == mode)
 		return 0;	/* Mode change OK */
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147d6ff..275dd177f19 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -45,7 +45,7 @@ static int vesa_probe(void)
 	ireg.di = (size_t)&vginfo;
 	intcall(0x10, &ireg, &oreg);
 
-	if (ireg.ax != 0x004f ||
+	if (oreg.ax != 0x004f ||
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
@@ -70,7 +70,7 @@ static int vesa_probe(void)
 		ireg.di = (size_t)&vminfo;
 		intcall(0x10, &ireg, &oreg);
 
-		if (ireg.ax != 0x004f)
+		if (oreg.ax != 0x004f)
 			continue;
 
 		if ((vminfo.mode_attr & 0x15) == 0x05) {
-- 
cgit v1.2.3


From e3d0e69268dffb9676bf0800a60fb3573a723480 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 5 Jul 2009 09:44:11 +0200
Subject: x86: Further clean up of mtrr/generic.c

Yinghai noticed that i defined BIOS_BUG_MSG but added no
usage for it. The usage is to clean up this turd in generic.c:

			printk(KERN_WARNING "WARNING: BIOS bug: VAR MTRR %d "
				"contains strange UC entry under 1M, check "
				"with your system vendor!\n", i);

Breaking printk lines in the middle looks ugly, is hard to read
and breaks 'git grep'. Use the BIOS_BUG_MSG instead.

Also complete the moving of structure definitions and variables
to the top of the file.

Reported-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/cleanup.c | 56 ++++++++++++++++++--------------------
 1 file changed, 27 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index b8aba811b60..315738c74aa 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -34,14 +34,37 @@
 
 #include "mtrr.h"
 
-/* Should be related to MTRR_VAR_RANGES nums */
-#define RANGE_NUM 256
-
 struct res_range {
 	unsigned long	start;
 	unsigned long	end;
 };
 
+struct var_mtrr_range_state {
+	unsigned long	base_pfn;
+	unsigned long	size_pfn;
+	mtrr_type	type;
+};
+
+struct var_mtrr_state {
+	unsigned long	range_startk;
+	unsigned long	range_sizek;
+	unsigned long	chunk_sizek;
+	unsigned long	gran_sizek;
+	unsigned int	reg;
+};
+
+/* Should be related to MTRR_VAR_RANGES nums */
+#define RANGE_NUM				256
+
+static struct res_range __initdata		range[RANGE_NUM];
+static int __initdata				nr_range;
+
+static struct var_mtrr_range_state __initdata	range_state[RANGE_NUM];
+
+static int __initdata debug_print;
+#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
+
+
 static int __init
 add_range(struct res_range *range, int nr_range,
 	  unsigned long start, unsigned long end)
@@ -147,18 +170,6 @@ static int __init cmp_range(const void *x1, const void *x2)
 	return start1 - start2;
 }
 
-struct var_mtrr_range_state {
-	unsigned long	base_pfn;
-	unsigned long	size_pfn;
-	mtrr_type	type;
-};
-
-static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
-
-static int __initdata debug_print;
-#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
-
-
 #define BIOS_BUG_MSG KERN_WARNING \
 	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
@@ -200,9 +211,7 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 		if (base < (1<<(20-PAGE_SHIFT)) && mtrr_state.have_fixed &&
 		    (mtrr_state.enabled & 1)) {
 			/* Var MTRR contains UC entry below 1M? Skip it: */
-			printk(KERN_WARNING "WARNING: BIOS bug: VAR MTRR %d "
-				"contains strange UC entry under 1M, check "
-				"with your system vendor!\n", i);
+			printk(BIOS_BUG_MSG, i);
 			if (base + size <= (1<<(20-PAGE_SHIFT)))
 				continue;
 			size -= (1<<(20-PAGE_SHIFT)) - base;
@@ -244,9 +253,6 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 	return nr_range;
 }
 
-static struct res_range __initdata range[RANGE_NUM];
-static int __initdata nr_range;
-
 #ifdef CONFIG_MTRR_SANITIZER
 
 static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
@@ -284,14 +290,6 @@ static int __init mtrr_cleanup_debug_setup(char *str)
 }
 early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup);
 
-struct var_mtrr_state {
-	unsigned long	range_startk;
-	unsigned long	range_sizek;
-	unsigned long	chunk_sizek;
-	unsigned long	gran_sizek;
-	unsigned int	reg;
-};
-
 static void __init
 set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
 	     unsigned char type, unsigned int address_bits)
-- 
cgit v1.2.3


From 7c3a742a86055df1d18aac25bb8652735b3491ef Mon Sep 17 00:00:00 2001
From: Sean MacLennan <smaclennan@pikatech.com>
Date: Tue, 16 Jun 2009 05:24:35 +0000
Subject: powerpc/44x: Update Warp defconfig

* Enable GPIO LEDS and LED triggers
* Move to SLUB
* Enable HOTPLUG
* Enable timestamps on printks
* Enable UBIFS
* Enable in-kernel config

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/configs/44x/warp_defconfig | 200 +++++++++++++++++++++++++-------
 1 file changed, 157 insertions(+), 43 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 3b77f092abe..787635f23d8 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Fri Jan 23 07:57:16 2009
+# Linux kernel version: 2.6.30
+# Tue Jun  9 23:35:36 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -41,6 +41,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -53,10 +54,12 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -74,7 +77,17 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
@@ -82,27 +95,29 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -110,10 +125,13 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -121,6 +139,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -133,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -149,11 +167,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -173,10 +186,11 @@ CONFIG_WARP=y
 # CONFIG_ARCHES is not set
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 # CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
+CONFIG_PPC4xx_GPIO=y
 CONFIG_440EP=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
@@ -235,9 +249,13 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -256,6 +274,7 @@ CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -271,14 +290,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +370,7 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +383,6 @@ CONFIG_VLAN_8021Q=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -378,8 +395,12 @@ CONFIG_VLAN_8021Q=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -471,13 +492,21 @@ CONFIG_MTD_NAND_NDFC=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -495,10 +524,17 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_XILINX_SYSACE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -529,7 +565,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCSI_WAIT_SCAN is not set
 
 #
 # SCSI Transports
@@ -541,10 +577,12 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -554,6 +592,8 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=128
 CONFIG_IBM_NEW_EMAC_TXB=64
@@ -577,7 +617,6 @@ CONFIG_IBM_NEW_EMAC_ZMII=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -646,6 +685,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -663,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IBM_IIC=y
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -685,12 +726,9 @@ CONFIG_I2C_IBM_IIC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -699,7 +737,30 @@ CONFIG_EEPROM_LEGACY=y
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -721,6 +782,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -735,11 +797,15 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -785,6 +851,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
@@ -870,11 +937,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -915,7 +982,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -929,6 +995,8 @@ CONFIG_USB_STORAGE=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -946,6 +1014,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_WBSD is not set
+CONFIG_MMC_PIKASD=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -953,16 +1022,31 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_GPIO_PLATFORM is not set
+CONFIG_LEDS_GPIO_OF=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -973,6 +1057,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -992,6 +1077,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1039,6 +1129,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1049,6 +1145,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1060,7 +1157,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1115,6 +1211,7 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -1122,7 +1219,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1130,16 +1227,19 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
 
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
@@ -1152,11 +1252,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1180,9 +1284,12 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1190,24 +1297,27 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
-CONFIG_BDI_SWITCH=y
+# CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1223,6 +1333,8 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1294,13 +1406,15 @@ CONFIG_CRYPTO=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
-- 
cgit v1.2.3


From ba703e1a7a0b32f740bcfba8e60ad193afa4e723 Mon Sep 17 00:00:00 2001
From: Sean MacLennan <smaclennan@pikatech.com>
Date: Sun, 28 Jun 2009 11:22:51 +0000
Subject: powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state =
 keep

The GPIO LEDS driver now has a default state of "keep".  Update the Warp DTS
and platform file to take advantage of this new state.  This removes the
hardcoding of the two LEDs on the Warp.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/dts/warp.dts    |  3 ++-
 arch/powerpc/platforms/44x/warp.c | 16 ++++------------
 2 files changed, 6 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index 01bfb56bbe8..31605ee4afb 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -261,10 +261,11 @@
 				compatible = "gpio-leds";
 				green {
 					gpios = <&GPIO1 0 0>;
-					default-state = "on";
+					default-state = "keep";
 				};
 				red {
 					gpios = <&GPIO1 1 0>;
+					default-state = "keep";
 				};
 			};
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 0362c88f47d..9916b391971 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -64,8 +64,6 @@ define_machine(warp) {
 };
 
 
-static u32 post_info;
-
 static int __init warp_post_info(void)
 {
 	struct device_node *np;
@@ -87,10 +85,9 @@ static int __init warp_post_info(void)
 
 	iounmap(fpga);
 
-	if (post1 || post2) {
+	if (post1 || post2)
 		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
-		post_info = 1;
-	} else
+	else
 		printk(KERN_INFO "Warp POST OK\n");
 
 	return 0;
@@ -179,15 +176,10 @@ static int pika_setup_leds(void)
 	}
 
 	for_each_child_of_node(np, child)
-		if (strcmp(child->name, "green") == 0) {
+		if (strcmp(child->name, "green") == 0)
 			green_led = of_get_gpio(child, 0);
-			/* Turn back on the green LED */
-			gpio_set_value(green_led, 1);
-		} else if (strcmp(child->name, "red") == 0) {
+		else if (strcmp(child->name, "red") == 0)
 			red_led = of_get_gpio(child, 0);
-			/* Set based on post */
-			gpio_set_value(red_led, post_info);
-		}
 
 	of_node_put(np);
 
-- 
cgit v1.2.3


From a22ebd069d5b533392e9bef77b73147a2f82b30b Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date: Sun, 5 Jul 2009 10:02:15 -0400
Subject: powerpc/44x: Fix build error with -Werror for Warp platform

With -Werror enabled during the build, the warp.c file fails to build
due to the temp_isr function not containing a return statement.  This
fixes the build error and documents that the function never returns.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/44x/warp.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 9916b391971..e5c1b096c3e 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -163,6 +163,9 @@ static irqreturn_t temp_isr(int irq, void *context)
 		value ^= 1;
 		mdelay(500);
 	}
+
+	/* Not reached */
+	return IRQ_HANDLED;
 }
 
 static int pika_setup_leds(void)
-- 
cgit v1.2.3


From ba9b42e4ff5eb68f9c946378229d7e45299d7151 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 10:50:37 +0100
Subject: [ARM] export __cpu_flush_dcache_page

Now required for libsas:

  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 1096 modules
ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined!

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/proc-syms.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 195e48edd8c..ac5c80062b7 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(__cpuc_flush_dcache_page);
 EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
 #else
 EXPORT_SYMBOL(cpu_cache);
-- 
cgit v1.2.3


From fb93a1c75eb646fde35985e9af23da936775ae52 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 11:30:15 +0100
Subject: [ARM] pgtable: swp pte layout documentation, definitions, and check

Document the layout of our swp PTE entries, adding definitions for
the bit masks/shifts/sizes, and implement MAX_SWAPFILES_CHECK()
such that we fail to build if we are unable to properly encode the
swp type field.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 30 +++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1cd2d6416bd..c1d97938f3e 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -384,16 +384,36 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------------> <--- type --> 0 0
  *
- * We support up to 32GB of swap on 4k machines
+ * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
  */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT	2
+#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)
-- 
cgit v1.2.3


From 65b1bfc13e8f50034187e339aa12b81cd6785bd5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 11:52:21 +0100
Subject: [ARM] pgtable: file pte layout documentation

Document the layout of our file PTE entries.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c1d97938f3e..c433c6c7311 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -285,15 +285,6 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_special(pte)	(0)
 
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -414,6 +405,20 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  */
 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
 
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)
-- 
cgit v1.2.3


From 6ed106549d17474ca17a16057f4c0ed4eba5a7ca Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Tue, 23 Jun 2009 06:03:08 +0000
Subject: net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions

This patch is the result of an automatic spatch transformation to convert
all ndo_start_xmit() return values of 0 to NETDEV_TX_OK.

Some occurences are missed by the automatic conversion, those will be
handled in a seperate patch.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/ia64/hp/sim/simeth.c  | 2 +-
 arch/um/drivers/net_kern.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index e4d8fde6810..7e81966ce48 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -412,7 +412,7 @@ simeth_tx(struct sk_buff *skb, struct net_device *dev)
 	 */
 
 	dev_kfree_skb(skb);
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static inline struct sk_buff *
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 3b44b47c7e1..4c75409bc09 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -245,7 +245,7 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev_kfree_skb(skb);
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static void uml_net_set_multicast_list(struct net_device *dev)
-- 
cgit v1.2.3


From ec634fe328182a1a098585bfc7b69e5042bdb08d Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Sun, 5 Jul 2009 19:23:38 -0700
Subject: net: convert remaining non-symbolic return values in ndo_start_xmit()
 functions

This patch converts the remaining occurences of raw return values to their
symbolic counterparts in ndo_start_xmit() functions that were missed by the
previous automatic conversion.

Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero
is changed to explicitly use NETDEV_TX_OK.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/xtensa/platforms/iss/network.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index edad4156d89..2f0b86b37cf 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -545,7 +545,7 @@ static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	dev_kfree_skb(skb);
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 
-- 
cgit v1.2.3


From 81d8279ea31a3fc6d4ffacd87119a04c561ca62e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 19:55:27 +0200
Subject: microblaze: fall back on generic header files for the ABI

Almost all of the ABI relevant header files now have generic
versions, so use those now in order to reduce the amount
of architecture specific code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/ioctls.h      |  92 +-------------
 arch/microblaze/include/asm/ipcbuf.h      |  37 +-----
 arch/microblaze/include/asm/mman.h        |  24 ----
 arch/microblaze/include/asm/msgbuf.h      |  32 +----
 arch/microblaze/include/asm/param.h       |  31 +----
 arch/microblaze/include/asm/posix_types.h |  68 +---------
 arch/microblaze/include/asm/sembuf.h      |  35 +----
 arch/microblaze/include/asm/shmbuf.h      |  43 +------
 arch/microblaze/include/asm/siginfo.h     |  14 --
 arch/microblaze/include/asm/socket.h      |  70 +---------
 arch/microblaze/include/asm/sockios.h     |  24 +---
 arch/microblaze/include/asm/stat.h        |  69 +---------
 arch/microblaze/include/asm/swab.h        |   9 +-
 arch/microblaze/include/asm/termbits.h    | 204 +-----------------------------
 arch/microblaze/include/asm/termios.h     |  89 +------------
 arch/microblaze/include/asm/types.h       |  39 +-----
 arch/microblaze/include/asm/ucontext.h    |  23 +---
 17 files changed, 16 insertions(+), 887 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/ioctls.h b/arch/microblaze/include/asm/ioctls.h
index 03582b24920..ec34c760665 100644
--- a/arch/microblaze/include/asm/ioctls.h
+++ b/arch/microblaze/include/asm/ioctls.h
@@ -1,91 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IOCTLS_H
-#define _ASM_MICROBLAZE_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT	0x5426 /* For debugging only */
-#define TIOCSBRK	0x5427 /* BSD compatibility */
-#define TIOCCBRK	0x5428 /* BSD compatibility */
-#define TIOCGSID	0x5429 /* Return the session ID of FD */
-/* Get Pty Number (of pty-mux device) */
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-#define TIOCSPTLCK	_IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX	0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR	0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D /* read serial port inline interrupt counts */
-
-#define	FIOQSIZE	0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		0
-#define TIOCPKT_FLUSHREAD	1
-#define TIOCPKT_FLUSHWRITE	2
-#define TIOCPKT_STOP		4
-#define TIOCPKT_START		8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_MICROBLAZE_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/microblaze/include/asm/ipcbuf.h b/arch/microblaze/include/asm/ipcbuf.h
index b056fa42065..84c7e51cb6d 100644
--- a/arch/microblaze/include/asm/ipcbuf.h
+++ b/arch/microblaze/include/asm/ipcbuf.h
@@ -1,36 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_IPCBUF_H
-#define _ASM_MICROBLAZE_IPCBUF_H
-
-/*
- * The user_ipc_perm structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* _ASM_MICROBLAZE_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/microblaze/include/asm/mman.h b/arch/microblaze/include/asm/mman.h
index 4914b132944..8eebf89f5ab 100644
--- a/arch/microblaze/include/asm/mman.h
+++ b/arch/microblaze/include/asm/mman.h
@@ -1,25 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMAN_H
-#define _ASM_MICROBLAZE_MMAN_H
-
 #include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN	0x0100 /* stack-like segment */
-#define MAP_DENYWRITE	0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000 /* mark it as an executable */
-#define MAP_LOCKED	0x2000 /* pages are locked */
-#define MAP_NORESERVE	0x4000 /* don't check for reservations */
-#define MAP_POPULATE	0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000 /* do not block on IO */
-
-#define MCL_CURRENT	1 /* lock all current mappings */
-#define MCL_FUTURE	2 /* lock all future mappings */
-
-#endif /* _ASM_MICROBLAZE_MMAN_H */
diff --git a/arch/microblaze/include/asm/msgbuf.h b/arch/microblaze/include/asm/msgbuf.h
index 09dd9709721..809134c644a 100644
--- a/arch/microblaze/include/asm/msgbuf.h
+++ b/arch/microblaze/include/asm/msgbuf.h
@@ -1,31 +1 @@
-#ifndef _ASM_MICROBLAZE_MSGBUF_H
-#define _ASM_MICROBLAZE_MSGBUF_H
-
-/*
- * The msqid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime; /* last msgsnd time */
-	unsigned long __unused1;
-	__kernel_time_t msg_rtime; /* last msgrcv time */
-	unsigned long __unused2;
-	__kernel_time_t msg_ctime; /* last change time */
-	unsigned long __unused3;
-	unsigned long msg_cbytes; /* current number of bytes on queue */
-	unsigned long msg_qnum; /* number of messages in queue */
-	unsigned long msg_qbytes; /* max number of bytes on queue */
-	__kernel_pid_t msg_lspid; /* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid; /* last receive pid */
-	unsigned long __unused4;
-	unsigned long __unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/microblaze/include/asm/param.h b/arch/microblaze/include/asm/param.h
index 8c538a49616..965d4542797 100644
--- a/arch/microblaze/include/asm/param.h
+++ b/arch/microblaze/include/asm/param.h
@@ -1,30 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_PARAM_H
-#define _ASM_MICROBLAZE_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
-#define USER_HZ		100		/* for user interfaces in "ticks" */
-#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif /* __KERNEL__ */
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* _ASM_MICROBLAZE_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 8c758b231f3..0e15039673e 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -1,73 +1,9 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
 #define _ASM_MICROBLAZE_POSIX_TYPES_H
 
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long	__kernel_ino_t;
 typedef unsigned short	__kernel_mode_t;
-typedef unsigned int	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned int	__kernel_ipc_pid_t;
-typedef unsigned int	__kernel_uid_t;
-typedef unsigned int	__kernel_gid_t;
-typedef unsigned long	__kernel_size_t;
-typedef long		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_timer_t;
-typedef int		__kernel_clockid_t;
-typedef int		__kernel_daddr_t;
-typedef char 		*__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned int	__kernel_old_uid_t;
-typedef unsigned int	__kernel_old_gid_t;
-typedef unsigned int	__kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef	__FD_CLR
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef	__FD_ISSET
-#define	__FD_ISSET(d, set)	(!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+#define __kernel_mode_t __kernel_mode_t
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#include <asm-generic/posix_types.h>
 
 #endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
diff --git a/arch/microblaze/include/asm/sembuf.h b/arch/microblaze/include/asm/sembuf.h
index b804ed71a57..7673b83cfef 100644
--- a/arch/microblaze/include/asm/sembuf.h
+++ b/arch/microblaze/include/asm/sembuf.h
@@ -1,34 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEMBUF_H
-#define _ASM_MICROBLAZE_SEMBUF_H
-
-/*
- * The semid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime; /* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime; /* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems; /* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-
-#endif /* _ASM_MICROBLAZE_SEMBUF_H */
+#include <asm-generic/sembuf.h>
diff --git a/arch/microblaze/include/asm/shmbuf.h b/arch/microblaze/include/asm/shmbuf.h
index f829c584361..83c05fc2de3 100644
--- a/arch/microblaze/include/asm/shmbuf.h
+++ b/arch/microblaze/include/asm/shmbuf.h
@@ -1,42 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMBUF_H
-#define _ASM_MICROBLAZE_SHMBUF_H
-
-/*
- * The shmid64_ds structure for microblaze architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm; /* operation perms */
-	size_t			shm_segsz; /* size of segment (bytes) */
-	__kernel_time_t		shm_atime; /* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime; /* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime; /* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid; /* pid of creator */
-	__kernel_pid_t		shm_lpid; /* pid of last operator */
-	unsigned long		shm_nattch; /* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _ASM_MICROBLAZE_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/microblaze/include/asm/siginfo.h b/arch/microblaze/include/asm/siginfo.h
index f162911a8f5..0815d29d82e 100644
--- a/arch/microblaze/include/asm/siginfo.h
+++ b/arch/microblaze/include/asm/siginfo.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGINFO_H
-#define _ASM_MICROBLAZE_SIGINFO_H
-
-#include <linux/types.h>
 #include <asm-generic/siginfo.h>
-
-#endif /* _ASM_MICROBLAZE_SIGINFO_H */
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 82593686031..6b71384b9d8 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -1,69 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKET_H
-#define _ASM_MICROBLAZE_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif /* _ASM_MICROBLAZE_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/microblaze/include/asm/sockios.h b/arch/microblaze/include/asm/sockios.h
index 9fff57a701e..def6d4746ee 100644
--- a/arch/microblaze/include/asm/sockios.h
+++ b/arch/microblaze/include/asm/sockios.h
@@ -1,23 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SOCKIOS_H
-#define _ASM_MICROBLAZE_SOCKIOS_H
-
-#include <linux/ioctl.h>
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/microblaze/include/asm/stat.h b/arch/microblaze/include/asm/stat.h
index a15f77520bf..3dc90fa92c7 100644
--- a/arch/microblaze/include/asm/stat.h
+++ b/arch/microblaze/include/asm/stat.h
@@ -1,68 +1 @@
-/*
- * Microblaze stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef _ASM_MICROBLAZE_STAT_H
-#define _ASM_MICROBLAZE_STAT_H
-
-#include <linux/posix_types.h>
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
-	unsigned long	st_dev;
-	unsigned long	st_ino;
-	unsigned int	st_mode;
-	unsigned int	st_nlink;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned long	st_rdev;
-	unsigned long	__pad1;
-	long		st_size;
-	int		st_blksize;
-	int		__pad2;
-	long		st_blocks;
-	int		st_atime;
-	unsigned int	st_atime_nsec;
-	int		st_mtime;
-	unsigned int	st_mtime_nsec;
-	int		st_ctime;
-	unsigned int	st_ctime_nsec;
-	unsigned long	__unused4;
-	unsigned long	__unused5;
-};
-
-struct stat64 {
-	unsigned long long	st_dev;		/* Device.  */
-	unsigned long long	st_ino;		/* File serial number.  */
-	unsigned int		st_mode;	/* File mode.  */
-	unsigned int		st_nlink;	/* Link count.  */
-	unsigned int		st_uid;		/* User ID of the file's owner.  */
-	unsigned int		st_gid;		/* Group ID of the file's group. */
-	unsigned long long	st_rdev;	/* Device number, if device.  */
-	unsigned long long	__pad1;
-	long long		st_size;	/* Size of file, in bytes.  */
-	int			st_blksize;	/* Optimal block size for I/O.  */
-	int			__pad2;
-	long long		st_blocks;	/* Number 512-byte blocks allocated. */
-	int			st_atime;	/* Time of last access.  */
-	unsigned int		st_atime_nsec;
-	int			st_mtime;	/* Time of last modification.  */
-	unsigned int		st_mtime_nsec;
-	int			st_ctime;	/* Time of last status change.  */
-	unsigned int		st_ctime_nsec;
-	unsigned int		__unused4;
-	unsigned int		__unused5;
-};
-
-#endif /* _ASM_MICROBLAZE_STAT_H */
-
+#include <asm-generic/stat.h>
diff --git a/arch/microblaze/include/asm/swab.h b/arch/microblaze/include/asm/swab.h
index b375d7b65ad..7847e563ab6 100644
--- a/arch/microblaze/include/asm/swab.h
+++ b/arch/microblaze/include/asm/swab.h
@@ -1,8 +1 @@
-#ifndef _ASM_MICROBLAZE_SWAB_H
-#define _ASM_MICROBLAZE_SWAB_H
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_MICROBLAZE_SWAB_H */
+#include <asm-generic/swab.h>
diff --git a/arch/microblaze/include/asm/termbits.h b/arch/microblaze/include/asm/termbits.h
index a1b64bc4724..3935b106de7 100644
--- a/arch/microblaze/include/asm/termbits.h
+++ b/arch/microblaze/include/asm/termbits.h
@@ -1,203 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMBITS_H
-#define _ASM_MICROBLAZE_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct ktermios {
-	tcflag_t c_iflag; /* input mode flags */
-	tcflag_t c_oflag; /* output mode flags */
-	tcflag_t c_cflag; /* control mode flags */
-	tcflag_t c_lflag; /* local mode flags */
-	cc_t c_line; /* line discipline */
-	cc_t c_cc[NCCS]; /* control characters */
-	speed_t c_ispeed; /* input speed */
-	speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define NL0	0000000
-#define NL1	0000400
-#define CRDLY	0003000
-#define CR0	0000000
-#define CR1	0001000
-#define CR2	0002000
-#define CR3	0003000
-#define TABDLY	0014000
-#define TAB0	0000000
-#define TAB1	0004000
-#define TAB2	0010000
-#define TAB3	0014000
-#define XTABS	0014000
-#define BSDLY	0020000
-#define BS0	0000000
-#define BS1	0020000
-#define VTDLY	0040000
-#define VT0	0000000
-#define VT1	0040000
-#define FFDLY	0100000
-#define FF0	0000000
-#define FF1	0100000
-
-/* c_cflag bit meaning */
-
-#define CBAUD	0010017
-#define B0	0000000 /* hang up */
-#define B50	0000001
-#define B75	0000002
-#define B110	0000003
-#define B134	0000004
-#define B150	0000005
-#define B200	0000006
-#define B300	0000007
-#define B600	0000010
-#define B1200	0000011
-#define B1800	0000012
-#define B2400	0000013
-#define B4800	0000014
-#define B9600	0000015
-#define B19200	0000016
-#define B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define CS5	0000000
-#define CS6	0000020
-#define CS7	0000040
-#define CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX	0010000
-#define B57600	0010001
-#define B115200	0010002
-#define B230400	0010003
-#define B460800	0010004
-#define B500000	0010005
-#define B576000	0010006
-#define B921600	0010007
-#define BOTHER		0010000
-#define B1000000	0010010
-#define B1152000	0010011
-#define B1500000	0010012
-#define B2000000	0010013
-#define B2500000	0010014
-#define B3000000	0010015
-#define B3500000	0010016
-#define B4000000	0010017
-#define CIBAUD		002003600000 /* input baud rate (not used) */
-#define CMSPAR		010000000000 /* mark or space (stick) parity */
-#define CRTSCTS		020000000000 /* flow control */
-
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* _ASM_MICROBLAZE_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/microblaze/include/asm/termios.h b/arch/microblaze/include/asm/termios.h
index 47a46d1fbe2..280d78a9d96 100644
--- a/arch/microblaze/include/asm/termios.h
+++ b/arch/microblaze/include/asm/termios.h
@@ -1,88 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TERMIOS_H
-#define _ASM_MICROBLAZE_TERMIOS_H
-
-#include <linux/string.h>
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag; /* input mode flags */
-	unsigned short c_oflag; /* output mode flags */
-	unsigned short c_cflag; /* control mode flags */
-	unsigned short c_lflag; /* local mode flags */
-	unsigned char c_line; /* line discipline */
-	unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/*	intr=^C		quit=^|		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* Modem lines */
-
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-/* Line disciplines */
-
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6 /* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8 /* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10 /* Reserved for Profibus <Dave@mvhi.com> */
-#define N_IRDA		11 /* Linux IR - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12 /* SMS block mode - for talking to GSM data cards
-				about SMS messages */
-#define N_HDLC		13 /* synchronous HDLC */
-#define N_SYNC_PPP	14
-#define N_HCI		15 /* Bluetooth HCI UART */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/termios-base.h>
-
-#endif	/* __KERNEL__ */
-
-#endif /* _ASM_MICROBLAZE_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/microblaze/include/asm/types.h b/arch/microblaze/include/asm/types.h
index bebc018318f..b9e79bc580d 100644
--- a/arch/microblaze/include/asm/types.h
+++ b/arch/microblaze/include/asm/types.h
@@ -1,38 +1 @@
-/*
- * Copyright (C) Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_TYPES_H
-#define _ASM_MICROBLAZE_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue.  However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-#include <asm-generic/int-ll64.h>
-
-# ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#  ifdef __KERNEL__
-#  define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#  endif/* __KERNEL__ */
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_TYPES_H */
+#include <asm-generic/types.h>
diff --git a/arch/microblaze/include/asm/ucontext.h b/arch/microblaze/include/asm/ucontext.h
index 11f6bb3ae3a..9bc07b9f30f 100644
--- a/arch/microblaze/include/asm/ucontext.h
+++ b/arch/microblaze/include/asm/ucontext.h
@@ -1,22 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_UCONTEXT_H
-#define _ASM_MICROBLAZE_UCONTEXT_H
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
-	unsigned long		uc_flags;
-	struct ucontext		*uc_link;
-	stack_t			uc_stack;
-	struct sigcontext	uc_mcontext;
-	sigset_t		uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
+#include <asm-generic/ucontext.h>
-- 
cgit v1.2.3


From 14f8738976991d2f8fb6ab6e10e9003562c3d6bb Mon Sep 17 00:00:00 2001
From: Remis Lima Baima <remis.developer@googlemail.com>
Date: Thu, 18 Jun 2009 19:55:32 +0200
Subject: microblaze: use the generic lib/checksum.c

The microblaze checksum code is mostly identical to
the asm-generic+lib version, so use that instead.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig                |   3 +
 arch/microblaze/include/asm/checksum.h |  70 +-------------
 arch/microblaze/lib/Makefile           |   2 +-
 arch/microblaze/lib/checksum.c         | 172 ---------------------------------
 4 files changed, 6 insertions(+), 241 deletions(-)
 delete mode 100644 arch/microblaze/lib/checksum.c

(limited to 'arch')

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index b50b845fdd5..2db722d80d4 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -53,6 +53,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_GPIO
 	def_bool y
 
+config GENERIC_CSUM
+	def_bool y
+
 config PCI
 	def_bool n
 
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 97ea46b5cf8..128bf03b54b 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -10,12 +10,11 @@
 #ifndef _ASM_MICROBLAZE_CHECKSUM_H
 #define _ASM_MICROBLAZE_CHECKSUM_H
 
-#include <linux/in6.h>
-
 /*
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
+#define csum_tcpudp_nofold	csum_tcpudp_nofold
 static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		   unsigned short proto, __wsum sum)
@@ -30,71 +29,6 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 	return sum;
 }
 
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
-								__wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
-					int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum)	\
-	csum_partial_copy((src), (dst), (len), (sum))
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- */
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum csum)
-{
-	u32 sum = (__force u32)csum;
-	sum = (sum & 0xffff) + (sum >> 16);
-	sum = (sum & 0xffff) + (sum >> 16);
-	return (__force __sum16)~sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
+#include <asm-generic/checksum.h>
 
 #endif /* _ASM_MICROBLAZE_CHECKSUM_H */
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 71c8cb6c9e4..b579db068c0 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile
 #
 
-lib-y :=  memset.o checksum.o
+lib-y :=  memset.o
 
 ifeq ($(CONFIG_OPT_LIB_ASM),y)
 lib-y += fastcopy.o
diff --git a/arch/microblaze/lib/checksum.c b/arch/microblaze/lib/checksum.c
deleted file mode 100644
index f08e7459141..00000000000
--- a/arch/microblaze/lib/checksum.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- *
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		IP/TCP/UDP checksumming routines
- *
- * Authors:	Jorge Cwik, <jorge@laser.satlink.net>
- *		Arnt Gulbrandsen, <agulbra@nvg.unit.no>
- *		Tom May, <ftom@netcom.com>
- *		Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- * 03/02/96	Jes Sorensen, Andreas Schwab, Roman Hodek:
- *		Fixed some nasty bugs, causing some horrible crashes.
- *		A: At some points, the sum (%0) was used as
- *		length-counter instead of the length counter
- *		(%1). Thanks to Roman Hodek for pointing this out.
- *		B: GCC seems to mess up if one uses too many
- *		data-registers to hold input values and one tries to
- *		specify d0 and d1 as scratch registers. Letting gcc
- *		choose these registers itself solves the problem.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
- kills, so most of the assembly has to go. */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-
-#include <asm/byteorder.h>
-
-static inline unsigned short from32to16(unsigned long x)
-{
-	/* add up 16-bit and 16-bit for 16+c bit */
-	x = (x & 0xffff) + (x >> 16);
-	/* add up carry.. */
-	x = (x & 0xffff) + (x >> 16);
-	return x;
-}
-
-static unsigned int do_csum(const unsigned char *buff, int len)
-{
-	int odd, count;
-	unsigned long result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = *buff;
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned long carry = 0;
-			do {
-				unsigned long w = *(unsigned long *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += (*buff << 8);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph, ihl*4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum wsum)
-{
-	unsigned int sum = (__force unsigned int)wsum;
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += sum;
-	if (sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-						__wsum sum, int *csum_err)
-{
-	int missing;
-
-	missing = __copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*csum_err = -EFAULT;
-	} else
-		*csum_err = 0;
-
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-__wsum
-csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
-	memcpy(dst, src, len);
-	return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
-- 
cgit v1.2.3


From 0a58458341fd571e521be542ff746a4a8995980c Mon Sep 17 00:00:00 2001
From: Remis Lima Baima <remis.developer@googlemail.com>
Date: Thu, 18 Jun 2009 19:55:33 +0200
Subject: microblaze: convert all simple headers to use asm-generic

All the simple microblaze header files were adapted to use their
asm-generic implementations. These files are more simple and were quite
straightforward to change.

fb.h, vga.h and parport.h previously did not exist, using
the generic version makes it possible to build more drivers
successfully in allyesonfig.

Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/atomic.h         | 101 +--------------------------
 arch/microblaze/include/asm/bitops.h         |  26 -------
 arch/microblaze/include/asm/bug.h            |  14 ----
 arch/microblaze/include/asm/bugs.h           |  18 +----
 arch/microblaze/include/asm/fb.h             |   1 +
 arch/microblaze/include/asm/hardirq.h        |  14 +---
 arch/microblaze/include/asm/irq.h            |   6 +-
 arch/microblaze/include/asm/mmu.h            |   7 +-
 arch/microblaze/include/asm/mmu_context.h    |   2 +-
 arch/microblaze/include/asm/mmu_context_no.h |  23 ------
 arch/microblaze/include/asm/module.h         |  10 +--
 arch/microblaze/include/asm/parport.h        |   1 +
 arch/microblaze/include/asm/pci.h            |   2 +-
 arch/microblaze/include/asm/scatterlist.h    |  29 +-------
 arch/microblaze/include/asm/serial.h         |  15 +---
 arch/microblaze/include/asm/shmparam.h       |   7 +-
 arch/microblaze/include/asm/system.h         |   3 +
 arch/microblaze/include/asm/timex.h          |   6 +-
 arch/microblaze/include/asm/vga.h            |   2 +-
 19 files changed, 21 insertions(+), 266 deletions(-)
 create mode 100644 arch/microblaze/include/asm/fb.h
 delete mode 100644 arch/microblaze/include/asm/mmu_context_no.h
 create mode 100644 arch/microblaze/include/asm/parport.h

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h
index 0de612ad7cb..6d2e1d418be 100644
--- a/arch/microblaze/include/asm/atomic.h
+++ b/arch/microblaze/include/asm/atomic.h
@@ -1,95 +1,7 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
 #ifndef _ASM_MICROBLAZE_ATOMIC_H
 #define _ASM_MICROBLAZE_ATOMIC_H
 
-#include <linux/types.h>
-#include <linux/compiler.h> /* likely */
-#include <asm/system.h> /* local_irq_XXX and friends */
-
-#define ATOMIC_INIT(i)		{ (i) }
-#define atomic_read(v)		((v)->counter)
-#define atomic_set(v, i)	(((v)->counter) = (i))
-
-#define atomic_inc(v)		(atomic_add_return(1, (v)))
-#define atomic_dec(v)		(atomic_sub_return(1, (v)))
-
-#define atomic_add(i, v)	(atomic_add_return(i, (v)))
-#define atomic_sub(i, v)	(atomic_sub_return(i, (v)))
-
-#define atomic_inc_return(v)	(atomic_add_return(1, (v)))
-#define atomic_dec_return(v)	(atomic_sub_return(1, (v)))
-
-#define atomic_inc_and_test(v)	(atomic_add_return(1, (v)) == 0)
-#define atomic_dec_and_test(v)	(atomic_sub_return(1, (v)) == 0)
-
-#define atomic_inc_not_zero(v)	(atomic_add_unless((v), 1, 0))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
-	int ret;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	ret = v->counter;
-	if (likely(ret == old))
-		v->counter = new;
-	local_irq_restore(flags);
-
-	return ret;
-}
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
-	int c, old;
-
-	c = atomic_read(v);
-	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
-		c = old;
-	return c != u;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	*addr &= ~mask;
-	local_irq_restore(flags);
-}
-
-/**
- * atomic_add_return - add and return
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int val;
-
-	local_irq_save(flags);
-	val = v->counter;
-	v->counter = val += i;
-	local_irq_restore(flags);
-
-	return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	return atomic_add_return(-i, v);
-}
+#include <asm-generic/atomic.h>
 
 /*
  * Atomically test *v and decrement if it is greater than 0.
@@ -109,15 +21,4 @@ static inline int atomic_dec_if_positive(atomic_t *v)
 	return res;
 }
 
-#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic-long.h>
-
 #endif /* _ASM_MICROBLAZE_ATOMIC_H */
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index d6df1fd4e1e..a72468f15c8 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -1,27 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BITOPS_H
-#define _ASM_MICROBLAZE_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* save_flags */
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
 #include <asm-generic/bitops.h>
-#include <asm-generic/bitops/__fls.h>
-
-#endif /* _ASM_MICROBLAZE_BITOPS_H */
diff --git a/arch/microblaze/include/asm/bug.h b/arch/microblaze/include/asm/bug.h
index 8eb2cdde11d..b12fd89e42e 100644
--- a/arch/microblaze/include/asm/bug.h
+++ b/arch/microblaze/include/asm/bug.h
@@ -1,15 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUG_H
-#define _ASM_MICROBLAZE_BUG_H
-
-#include <linux/kernel.h>
 #include <asm-generic/bug.h>
-
-#endif /* _ASM_MICROBLAZE_BUG_H */
diff --git a/arch/microblaze/include/asm/bugs.h b/arch/microblaze/include/asm/bugs.h
index f2c6593653f..61791e1ad9f 100644
--- a/arch/microblaze/include/asm/bugs.h
+++ b/arch/microblaze/include/asm/bugs.h
@@ -1,17 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_BUGS_H
-#define _ASM_MICROBLAZE_BUGS_H
-
-static inline void check_bugs(void)
-{
-	/* nothing to do */
-}
-
-#endif /* _ASM_MICROBLAZE_BUGS_H */
+#include <asm-generic/bugs.h>
diff --git a/arch/microblaze/include/asm/fb.h b/arch/microblaze/include/asm/fb.h
new file mode 100644
index 00000000000..3a4988e8df4
--- /dev/null
+++ b/arch/microblaze/include/asm/fb.h
@@ -0,0 +1 @@
+#include <asm-generic/fb.h>
diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 0f2d6b013e1..41e1e1aa36a 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -9,21 +9,11 @@
 #ifndef _ASM_MICROBLAZE_HARDIRQ_H
 #define _ASM_MICROBLAZE_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/current.h>
-#include <linux/ptrace.h>
-
 /* should be defined in each interrupt controller driver */
 extern unsigned int get_irq(struct pt_regs *regs);
 
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
+#define ack_bad_irq ack_bad_irq
 void ack_bad_irq(unsigned int irq);
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+#include <asm-generic/hardirq.h>
 
 #endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index db515deaa72..90f050535eb 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -10,6 +10,7 @@
 #define _ASM_MICROBLAZE_IRQ_H
 
 #define NR_IRQS 32
+#include <asm-generic/irq.h>
 
 #include <linux/interrupt.h>
 
@@ -17,11 +18,6 @@ extern unsigned int nr_irq;
 
 #define NO_IRQ (-1)
 
-static inline int irq_canonicalize(int irq)
-{
-	return irq;
-}
-
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index 66cad6a99d7..8d6a654ceff 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -12,12 +12,7 @@
 #define _ASM_MICROBLAZE_MMU_H
 
 # ifndef CONFIG_MMU
-#  ifndef __ASSEMBLY__
-typedef struct {
-	struct vm_list_struct	*vmlist;
-	unsigned long		end_brk;
-} mm_context_t;
-#  endif /* __ASSEMBLY__ */
+#  include <asm-generic/mmu.h>
 # else /* CONFIG_MMU */
 #  ifdef __KERNEL__
 #   ifndef __ASSEMBLY__
diff --git a/arch/microblaze/include/asm/mmu_context.h b/arch/microblaze/include/asm/mmu_context.h
index 385fed16bbf..24eab1674d3 100644
--- a/arch/microblaze/include/asm/mmu_context.h
+++ b/arch/microblaze/include/asm/mmu_context.h
@@ -1,5 +1,5 @@
 #ifdef CONFIG_MMU
 # include "mmu_context_mm.h"
 #else
-# include "mmu_context_no.h"
+# include <asm-generic/mmu_context.h>
 #endif
diff --git a/arch/microblaze/include/asm/mmu_context_no.h b/arch/microblaze/include/asm/mmu_context_no.h
deleted file mode 100644
index ba556719015..00000000000
--- a/arch/microblaze/include/asm/mmu_context_no.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
-#define _ASM_MICROBLAZE_MMU_CONTEXT_H
-
-# define init_new_context(tsk, mm)		({ 0; })
-
-# define enter_lazy_tlb(mm, tsk)		do {} while (0)
-# define change_mm_context(old, ctx, _pml4)	do {} while (0)
-# define destroy_context(mm)			do {} while (0)
-# define deactivate_mm(tsk, mm)			do {} while (0)
-# define switch_mm(prev, next, tsk)		do {} while (0)
-# define activate_mm(prev, next)		do {} while (0)
-
-#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
diff --git a/arch/microblaze/include/asm/module.h b/arch/microblaze/include/asm/module.h
index 914565a9031..7be1347fce4 100644
--- a/arch/microblaze/include/asm/module.h
+++ b/arch/microblaze/include/asm/module.h
@@ -9,6 +9,8 @@
 #ifndef _ASM_MICROBLAZE_MODULE_H
 #define _ASM_MICROBLAZE_MODULE_H
 
+#include <asm-generic/module.h>
+
 /* Microblaze Relocations */
 #define R_MICROBLAZE_NONE 0
 #define R_MICROBLAZE_32 1
@@ -24,14 +26,6 @@
 /* Keep this the last entry. */
 #define R_MICROBLAZE_NUM 11
 
-struct mod_arch_specific {
-	int foo;
-};
-
-#define Elf_Shdr	Elf32_Shdr
-#define Elf_Sym		Elf32_Sym
-#define Elf_Ehdr	Elf32_Ehdr
-
 typedef struct { volatile int counter; } module_t;
 
 #endif /* _ASM_MICROBLAZE_MODULE_H */
diff --git a/arch/microblaze/include/asm/parport.h b/arch/microblaze/include/asm/parport.h
new file mode 100644
index 00000000000..cf252af6459
--- /dev/null
+++ b/arch/microblaze/include/asm/parport.h
@@ -0,0 +1 @@
+#include <asm-generic/parport.h>
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index ca03794cf3f..9f0df5faf2c 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -1 +1 @@
-#include <linux/io.h>
+#include <asm-generic/pci.h>
diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h
index 08ff1d049b4..35d786fe93a 100644
--- a/arch/microblaze/include/asm/scatterlist.h
+++ b/arch/microblaze/include/asm/scatterlist.h
@@ -1,28 +1 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
-#define _ASM_MICROBLAZE_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	dma_addr_t	dma_address;
-	unsigned int	offset;
-	unsigned int	length;
-};
-
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
diff --git a/arch/microblaze/include/asm/serial.h b/arch/microblaze/include/asm/serial.h
index 39bfc8ce6af..a0cb0caff15 100644
--- a/arch/microblaze/include/asm/serial.h
+++ b/arch/microblaze/include/asm/serial.h
@@ -1,14 +1 @@
-/*
- * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SERIAL_H
-#define _ASM_MICROBLAZE_SERIAL_H
-
-# define BASE_BAUD (1843200 / 16)
-
-#endif /* _ASM_MICROBLAZE_SERIAL_H */
+#include <asm-generic/serial.h>
diff --git a/arch/microblaze/include/asm/shmparam.h b/arch/microblaze/include/asm/shmparam.h
index 9f5fc2b3b6a..93f30deb95d 100644
--- a/arch/microblaze/include/asm/shmparam.h
+++ b/arch/microblaze/include/asm/shmparam.h
@@ -1,6 +1 @@
-#ifndef _ASM_MICROBLAZE_SHMPARAM_H
-#define _ASM_MICROBLAZE_SHMPARAM_H
-
-#define SHMLBA	PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
+#include <asm-generic/shmparam.h>
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index c4e308850b5..b1ed6159066 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -13,6 +13,9 @@
 #include <asm/setup.h>
 #include <asm/irqflags.h>
 
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
 struct task_struct;
 struct thread_info;
 
diff --git a/arch/microblaze/include/asm/timex.h b/arch/microblaze/include/asm/timex.h
index 678525dc6d0..befcf3de553 100644
--- a/arch/microblaze/include/asm/timex.h
+++ b/arch/microblaze/include/asm/timex.h
@@ -9,10 +9,8 @@
 #ifndef _ASM_MICROBLAZE_TIMEX_H
 #define _ASM_MICROBLAZE_TIMEX_H
 
-#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
-
-typedef unsigned long cycles_t;
+#include <asm-generic/timex.h>
 
-#define get_cycles()	(0)
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
 
 #endif /* _ASM_TIMEX_H */
diff --git a/arch/microblaze/include/asm/vga.h b/arch/microblaze/include/asm/vga.h
index 8b137891791..89d82fd8fcf 100644
--- a/arch/microblaze/include/asm/vga.h
+++ b/arch/microblaze/include/asm/vga.h
@@ -1 +1 @@
-
+#include <asm-generic/vga.h>
-- 
cgit v1.2.3


From 3183e06863f49a500fc76427db4d60825a26f81b Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 19:55:29 +0200
Subject: microblaze: clean up signal handling

When legacy signal handling is disabled, the
arch/microblaze/kernel/signal.c implementation can
be much simpler, as most of it is handled generically
from kernel/signal.c.

This is also a prerequisite for using the generic
asm/unistd.h, which does not provide __NR_sigreturn,
because this macro is referenced by the current signal.c
implementation.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/signal.h   | 166 +------------------------------
 arch/microblaze/include/asm/syscalls.h |  11 +--
 arch/microblaze/include/asm/unistd.h   |   2 +-
 arch/microblaze/kernel/entry-nommu.S   |   8 --
 arch/microblaze/kernel/entry.S         |  23 -----
 arch/microblaze/kernel/signal.c        | 172 +++++++--------------------------
 arch/microblaze/kernel/syscall_table.S |   6 +-
 7 files changed, 43 insertions(+), 345 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/signal.h b/arch/microblaze/include/asm/signal.h
index 46bc2267d94..7b1573ce19d 100644
--- a/arch/microblaze/include/asm/signal.h
+++ b/arch/microblaze/include/asm/signal.h
@@ -1,165 +1 @@
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *	Yasushi SHOJI <yashi@atmark-techno.com>
- *	Tetsuya OHKAWA <tetsuya@atmark-techno.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SIGNAL_H
-#define _ASM_MICROBLAZE_SIGNAL_H
-
-#define SIGHUP		1
-#define SIGINT		2
-#define SIGQUIT		3
-#define SIGILL		4
-#define SIGTRAP		5
-#define SIGABRT		6
-#define SIGIOT		6
-#define SIGBUS		7
-#define SIGFPE		8
-#define SIGKILL		9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-# ifndef __ASSEMBLY__
-# include <linux/types.h>
-# include <asm-generic/signal-defs.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#  ifdef __KERNEL__
-/*
- * Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-#  define _NSIG		64
-#  define _NSIG_BPW	32
-#  define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-	sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-#  include <asm/sigcontext.h>
-#  undef __HAVE_ARCH_SIG_BITOPS
-
-#  define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#  else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#  define NSIG		32
-typedef unsigned long sigset_t;
-
-struct sigaction {
-	union {
-	__sighandler_t _sa_handler;
-	void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#  define sa_handler	_u._sa_handler
-#  define sa_sigaction	_u._sa_sigaction
-
-#  endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SIGNAL_H */
+#include <asm-generic/signal.h>
diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ddea9eb31f8..ea23843e2c2 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -26,23 +26,16 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
 			unsigned long fd, off_t offset);
 
 /* from signal.c */
-asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
 		struct pt_regs *regs);
 
-asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact);
-
 asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
 		struct sigaction __user *oact, size_t sigsetsize);
 
 asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs);
 
-asmlinkage int sys_sigreturn(struct pt_regs *regs);
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs);
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index b5e2f5fa5c5..6c660c14465 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -408,7 +408,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
-/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /*
  * "Conditional" syscalls
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 1fce6b803f5..2eaf3946cb4 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -563,18 +563,10 @@ sys_execve_wrapper:
 	brid	sys_execve
 	addk	r8, r1, r0
 
-sys_sigreturn_wrapper:
-	brid	sys_sigreturn
-	addk	r5, r1, r0
-
 sys_rt_sigreturn_wrapper:
 	brid	sys_rt_sigreturn
 	addk	r5, r1, r0
 
-sys_sigsuspend_wrapper:
-	brid	sys_rt_sigsuspend
-	addk	r6, r1, r0
-
 sys_rt_sigsuspend_wrapper:
 	brid	sys_rt_sigsuspend
 	addk	r7, r1, r0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index 91a0e7b185d..ea7107652d8 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -449,17 +449,6 @@ C_ENTRY(sys_execve_wrapper):
 	brid	sys_execve;	/* Do real work (tail-call).*/
 	nop;
 
-C_ENTRY(sys_sigsuspend_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r6, r1, PTO;		/* add user context as 2nd arg */
-	bralid	r15, sys_sigsuspend; /* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
-	nop;
-
 C_ENTRY(sys_rt_sigsuspend_wrapper):
 	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	swi	r4, r1, PTO+PT_R4;
@@ -471,18 +460,6 @@ C_ENTRY(sys_rt_sigsuspend_wrapper):
 	bri ret_from_trap /* fall through will not work here due to align */
 	nop;
 
-
-C_ENTRY(sys_sigreturn_wrapper):
-	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	swi	r4, r1, PTO+PT_R4;
-	la	r5, r1, PTO;		/* add user context as 1st arg */
-	brlid	r15, sys_sigreturn;	/* Do real work.*/
-	nop;
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
-	bri ret_from_trap /* fall through will not work here due to align */
-	nop;
-
 C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	swi	r4, r1, PTO+PT_R4;
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 4c0e6521b11..2e5862c3002 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -45,89 +45,6 @@
 
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
 
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->r3 = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset, 1))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction *act,
-		struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-			__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-			__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-			__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-			__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
 
 asmlinkage int
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
@@ -139,7 +56,6 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 /*
  * Do a signal return; undo the signal stack.
  */
-
 struct sigframe {
 	struct sigcontext sc;
 	unsigned long extramask[_NSIG_WORDS-1];
@@ -176,40 +92,7 @@ static int restore_sigcontext(struct pt_regs *regs,
 	return err;
 }
 
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame =
-			(struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
-
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-		|| (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-					sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame =
 		(struct rt_sigframe __user *)(regs->r1 + STATE_SAVE_ARG_SPACE);
@@ -324,21 +207,17 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* Set up to return from userspace. If provided, use a stub
 	 already in userspace. */
 	/* minus 8 is offset to cater for "rtsd r15,8" */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
-	} else {
-		/* addi r12, r0, __NR_sigreturn */
-		err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
-				frame->tramp + 0);
-		/* brki r14, 0x8 */
-		err |= __put_user(0xb9cc0008, frame->tramp + 1);
-
-		/* Return from sighandler will jump to the tramp.
-		 Negative 8 offset because return is rtsd r15, 8 */
-		regs->r15 = ((unsigned long)frame->tramp)-8;
-
-		__invalidate_cache_sigtramp((unsigned long)frame->tramp);
-	}
+	/* addi r12, r0, __NR_sigreturn */
+	err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+			frame->tramp + 0);
+	/* brki r14, 0x8 */
+	err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+	/* Return from sighandler will jump to the tramp.
+	 Negative 8 offset because return is rtsd r15, 8 */
+	regs->r15 = ((unsigned long)frame->tramp)-8;
+
+	__invalidate_cache_sigtramp((unsigned long)frame->tramp);
 
 	if (err)
 		goto give_sigsegv;
@@ -405,7 +284,7 @@ do_restart:
  * OK, we're invoking a handler
  */
 
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 		siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
@@ -426,6 +305,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 		recalc_sigpending();
 		spin_unlock_irq(&current->sighand->siglock);
 	}
+	return 1;
 }
 
 /*
@@ -456,7 +336,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
 	if (kernel_mode(regs))
 		return 1;
 
-	if (!oldset)
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -464,13 +346,31 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
 		/* Whee! Actually deliver the signal. */
 		if (in_syscall)
 			handle_restart(regs, &ka, 1);
-		handle_signal(signr, &ka, &info, oldset, regs);
+		if (handle_signal(signr, &ka, &info, oldset, regs)) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &=
+			    ~TS_RESTORE_SIGMASK;
+		}
 		return 1;
 	}
 
 	if (in_syscall)
 		handle_restart(regs, NULL, 0);
 
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
 	/* Did we come from a system call? */
 	return 0;
 }
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 376d1789f7c..ef0e8932af3 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -71,12 +71,12 @@ ENTRY(sys_call_table)
 	.long sys_getppid
 	.long sys_getpgrp		/* 65 */
 	.long sys_setsid
-	.long sys_sigaction
+	.long sys_ni_syscall		/* sys_sigaction */
 	.long sys_sgetmask
 	.long sys_ssetmask
 	.long sys_setreuid		/* 70 */
 	.long sys_setregid
-	.long sys_sigsuspend_wrapper
+	.long sys_ni_syscall		/* sys_sigsuspend_wrapper */
 	.long sys_sigpending
 	.long sys_sethostname
 	.long sys_setrlimit		/* 75 */
@@ -123,7 +123,7 @@ ENTRY(sys_call_table)
 	.long sys_sysinfo
 	.long sys_ipc
 	.long sys_fsync
-	.long sys_sigreturn_wrapper
+	.long sys_ni_syscall		/* sys_sigreturn_wrapper */
 	.long sys_clone_wrapper		/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
-- 
cgit v1.2.3


From e513588f75912f022677866244de6b19b98b8d9a Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 19:55:30 +0200
Subject: microblaze: use generic syscalls.h

The prototypes in syscalls.h all make sense for
microblaze, but for some of them, the actual implementation
in sys_microblaze.c needs to be adapted.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/syscalls.h  | 39 +++------------------------------
 arch/microblaze/kernel/entry-nommu.S    | 12 +++++-----
 arch/microblaze/kernel/entry.S          | 11 +++++-----
 arch/microblaze/kernel/signal.c         |  2 +-
 arch/microblaze/kernel/sys_microblaze.c | 20 ++++++++---------
 arch/microblaze/kernel/syscall_table.S  |  6 ++---
 6 files changed, 28 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/syscalls.h b/arch/microblaze/include/asm/syscalls.h
index ea23843e2c2..720761cc741 100644
--- a/arch/microblaze/include/asm/syscalls.h
+++ b/arch/microblaze/include/asm/syscalls.h
@@ -1,41 +1,8 @@
 #ifndef __ASM_MICROBLAZE_SYSCALLS_H
-#define __ASM_MICROBLAZE_SYSCALLS_H
-#ifdef __KERNEL__
 
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <linux/types.h>
-#include <linux/signal.h>
+asmlinkage long sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+#define sys_clone sys_clone
 
-/* FIXME will be removed */
-asmlinkage int sys_ipc(uint call, int first, int second,
-				int third, void *ptr, long fifth);
+#include <asm-generic/syscalls.h>
 
-struct pt_regs;
-asmlinkage int sys_vfork(struct pt_regs *regs);
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
-			char __user *__user *envp, struct pt_regs *regs);
-
-asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff);
-
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset);
-
-/* from signal.c */
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		struct pt_regs *regs);
-
-asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
-		struct sigaction __user *oact, size_t sigsetsize);
-
-asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
-		struct pt_regs *regs);
-
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs);
-
-#endif /* __KERNEL__ */
 #endif /* __ASM_MICROBLAZE_SYSCALLS_H */
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 2eaf3946cb4..9083d85376a 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -551,16 +551,16 @@ no_work_pending:
 	rtid	r14, 0
 	nop
 
-sys_vfork_wrapper:
-	brid	sys_vfork
+sys_vfork:
+	brid	microblaze_vfork
 	addk	r5, r1, r0
 
-sys_clone_wrapper:
-	brid	sys_clone
+sys_clone:
+	brid	microblaze_clone
 	addk	r7, r1, r0
 
-sys_execve_wrapper:
-	brid	sys_execve
+sys_execve:
+	brid	microblaze_execve
 	addk	r8, r1, r0
 
 sys_rt_sigreturn_wrapper:
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index ea7107652d8..c7353e79f4a 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -429,12 +429,11 @@ C_ENTRY(ret_from_fork):
 	brid	ret_from_trap;	/* Do normal trap return */
 	nop;
 
-C_ENTRY(sys_vfork_wrapper):
+C_ENTRY(sys_vfork):
+	brid	microblaze_vfork	/* Do real work (tail-call) */
 	la	r5, r1, PTO
-	brid	sys_vfork	/* Do real work (tail-call) */
-	nop
 
-C_ENTRY(sys_clone_wrapper):
+C_ENTRY(sys_clone):
 	bnei	r6, 1f;			/* See if child SP arg (arg 1) is 0. */
 	lwi	r6, r1, PTO+PT_R1;	/* If so, use paret's stack ptr */
 1:	la	r7, r1, PTO;			/* Arg 2: parent context */
@@ -444,9 +443,9 @@ C_ENTRY(sys_clone_wrapper):
 	brid	do_fork		/* Do real work (tail-call) */
 	nop;
 
-C_ENTRY(sys_execve_wrapper):
+C_ENTRY(sys_execve):
 	la	r8, r1, PTO;		/* add user context as 4th arg */
-	brid	sys_execve;	/* Do real work (tail-call).*/
+	brid	microblaze_execve;	/* Do real work (tail-call).*/
 	nop;
 
 C_ENTRY(sys_rt_sigsuspend_wrapper):
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 2e5862c3002..493819c25fb 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -46,7 +46,7 @@
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
 
 
-asmlinkage int
+asmlinkage long
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		struct pt_regs *regs)
 {
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 31905ff590b..8c9ebac5da1 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -39,7 +39,7 @@
  *
  * This is really horribly ugly. This will be remove with new toolchain.
  */
-asmlinkage int
+asmlinkage long
 sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 {
 	int version, ret;
@@ -134,20 +134,20 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 	return ret;
 }
 
-asmlinkage int sys_vfork(struct pt_regs *regs)
+asmlinkage long microblaze_vfork(struct pt_regs *regs)
 {
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
 						regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+asmlinkage long microblaze_clone(int flags, unsigned long stack, struct pt_regs *regs)
 {
 	if (!stack)
 		stack = regs->r1;
 	return do_fork(flags, stack, regs, 0, NULL, NULL);
 }
 
-asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+asmlinkage long microblaze_execve(char __user *filenamei, char __user *__user *argv,
 			char __user *__user *envp, struct pt_regs *regs)
 {
 	int error;
@@ -163,8 +163,8 @@ out:
 	return error;
 }
 
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, size_t len,
+asmlinkage long
+sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)
 {
@@ -189,18 +189,18 @@ out:
 	return ret;
 }
 
-asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
 			unsigned long prot, unsigned long flags,
-			unsigned long fd, off_t offset)
+			unsigned long fd, off_t pgoff)
 {
 	int err = -EINVAL;
 
-	if (offset & ~PAGE_MASK) {
+	if (pgoff & ~PAGE_MASK) {
 		printk(KERN_INFO "no pagemask in mmap\r\n");
 		goto out;
 	}
 
-	err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+	err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
 out:
 	return err;
 }
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index ef0e8932af3..8a609354dde 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -15,7 +15,7 @@ ENTRY(sys_call_table)
 	.long sys_creat
 	.long sys_link
 	.long sys_unlink		/* 10 */
-	.long sys_execve_wrapper
+	.long sys_execve
 	.long sys_chdir
 	.long sys_time
 	.long sys_mknod
@@ -124,7 +124,7 @@ ENTRY(sys_call_table)
 	.long sys_ipc
 	.long sys_fsync
 	.long sys_ni_syscall		/* sys_sigreturn_wrapper */
-	.long sys_clone_wrapper		/* 120 */
+	.long sys_clone		/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
 	.long sys_ni_syscall		/* modify_ldt */
@@ -194,7 +194,7 @@ ENTRY(sys_call_table)
 	.long sys_sendfile
 	.long sys_ni_syscall		/* reserved for streams1 */
 	.long sys_ni_syscall		/* reserved for streams2 */
-	.long sys_vfork_wrapper		/* 190 */
+	.long sys_vfork		/* 190 */
 	.long sys_getrlimit
 	.long sys_mmap2			/* mmap2 */
 	.long sys_truncate64
-- 
cgit v1.2.3


From 4ae78338157a1fe2d7a398d86bb9f9043d600d2b Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 1 Jul 2009 15:32:14 +0200
Subject: microblaze: Wire up new syscalls

Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/unistd.h   | 4 +++-
 arch/microblaze/kernel/syscall_table.S | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index 6c660c14465..0b852327c0e 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -380,8 +380,10 @@
 #define __NR_accept04		362 /* new */
 #define __NR_preadv		363 /* new */
 #define __NR_pwritev		364 /* new */
+#define __NR_rt_tgsigqueueinfo	365 /* new */
+#define __NR_perf_counter_open	366 /* new */
 
-#define __NR_syscalls		365
+#define __NR_syscalls		367
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 8a609354dde..31b32a6c5f4 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -369,3 +369,5 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall
 	.long sys_ni_syscall
 	.long sys_ni_syscall
+	.long sys_rt_tgsigqueueinfo	/* 365 */
+	.long sys_perf_counter_open
-- 
cgit v1.2.3


From db6e3f91efd2cf61b9965f722902199cf54adc4f Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 6 Jul 2009 08:21:09 +0200
Subject: microblaze: Fix cast warning for init.c

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/mm/init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index b5a701cd71e..8d92c4efe9a 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -80,15 +80,15 @@ void __init setup_memory(void)
 			memory_size = memory_end - memory_start;
 			PAGE_OFFSET = memory_start;
 			printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
-				"size 0x%08x\n", __func__, memory_start,
-						memory_end, memory_size);
+				"size 0x%08x\n", __func__, (u32) memory_start,
+					(u32) memory_end, (u32) memory_size);
 			break;
 		}
 	}
 
 	if (!memory_start || !memory_end) {
 		panic("%s: Missing memory setting 0x%08x-0x%08x\n",
-			__func__, memory_start, memory_end);
+			__func__, (u32) memory_start, (u32) memory_end);
 	}
 
 	/* reservation of region where is the kernel */
-- 
cgit v1.2.3


From 22fe84394f405c673b362d23dcc2d5d095ab5f6c Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 6 Jul 2009 08:56:51 +0300
Subject: [ARM] pxa: fix ULPI_{DIR,NXT,STP} MFP defines

Attepmpt to configure ULPI pins gives the following compile error:
  CC      arch/arm/mach-pxa/cm-x300.o
  arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_AF0' undeclared here (not in a function)
  arch/arm/mach-pxa/cm-x300.c:155: error: 'MFP_MFP_DS01X' undeclared here (not in a function)
  make[2]: *** [arch/arm/mach-pxa/cm-x300.o] Error 1
  make[1]: *** [arch/arm/mach-pxa] Error 2
  make: *** [sub-make] Error 2

Fix it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/mfp-pxa300.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index ae8441192ef..7139e0dc26d 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -567,9 +567,9 @@
 #define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
 #define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
 
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
 #endif /* CONFIG_CPU_PXA310 */
 
 #endif /* __ASM_ARCH_MFP_PXA300_H */
-- 
cgit v1.2.3


From ca0d17277fd101ce4878f92b398b6ab71fb2c287 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 28 Jun 2009 12:53:07 +0100
Subject: sh: Fix the value of MCOUNT_INSN_OFFSET

It seems that MCOUNT_INSN_OFFSET was calculating the distance between
the wrong functions. The value that should have actually been computed
is the distance between ftrace_call and ftrace_stub. I discovered this
when I added some code to ftrace_caller.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/ftrace.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
index 8fea7d8c825..b09311ad1db 100644
--- a/arch/sh/include/asm/ftrace.h
+++ b/arch/sh/include/asm/ftrace.h
@@ -11,10 +11,10 @@ extern void mcount(void);
 #define MCOUNT_ADDR		((long)(mcount))
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-#define CALLER_ADDR		((long)(ftrace_caller))
+#define CALL_ADDR		((long)(ftrace_call))
 #define STUB_ADDR		((long)(ftrace_stub))
 
-#define MCOUNT_INSN_OFFSET	((STUB_ADDR - CALLER_ADDR) >> 1)
+#define MCOUNT_INSN_OFFSET	((STUB_ADDR - CALL_ADDR) - 4)
 
 struct dyn_arch_ftrace {
 	/* No extra data needed on sh */
-- 
cgit v1.2.3


From c1340c053be7a43d837a3acb352d5008be865a55 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 28 Jun 2009 14:05:44 +0100
Subject: sh: Define HAVE_FUNCTION_TRACE_MCOUNT_TEST

Enable HAVE_FUNCTION_TRACE_MCOUNT_TEST and test the value of
function_trace_stop from our assembly code as opposed to using the
generic C function. This should optimise our mcount/ftrace code path.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig      |  1 +
 arch/sh/lib/mcount.S | 17 ++++++++++++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e2bdd7b94fd..801a4a79ffe 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -31,6 +31,7 @@ config SUPERH32
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index 110fbfe1831..cb87ef580b3 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -2,7 +2,7 @@
  * arch/sh/lib/mcount.S
  *
  *  Copyright (C) 2008  Paul Mundt
- *  Copyright (C) 2008  Matt Fleming
+ *  Copyright (C) 2008, 2009  Matt Fleming
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -35,6 +35,12 @@
 	.type	mcount,@function
 _mcount:
 mcount:
+#ifndef CONFIG_DYNAMIC_FTRACE
+	mov.l	.Lfunction_trace_stop, r0
+	mov.l	@r0, r0
+	tst	r0, r0
+	bf	ftrace_stub
+#endif
 	MCOUNT_ENTER()
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -62,6 +68,11 @@ skip_trace:
 #ifdef CONFIG_DYNAMIC_FTRACE
 	.globl ftrace_caller
 ftrace_caller:
+	mov.l	.Lfunction_trace_stop, r0
+	mov.l	@r0, r0
+	tst	r0, r0
+	bf	ftrace_stub
+	
 	MCOUNT_ENTER()
 
 	.globl ftrace_call
@@ -88,3 +99,7 @@ ftrace_call:
 ftrace_stub:
 	rts
 	 nop
+
+	.align 2
+.Lfunction_trace_stop:
+	.long	function_trace_stop
-- 
cgit v1.2.3


From bbeddc43e673fb6882cc55efdc3c3002c14f5d08 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:43:01 +0100
Subject: [ARM] versatile: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                            |  1 +
 arch/arm/mach-versatile/core.c              | 15 +++++++++++++--
 arch/arm/mach-versatile/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-versatile/include/mach/irqs.h | 11 ++++++++++-
 arch/arm/mach-versatile/versatile_pb.c      | 15 +++++++++++++--
 5 files changed, 43 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-versatile/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..e4971e4fa56 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -229,6 +229,7 @@ config ARCH_VERSATILE
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd Versatile board.
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc8bd1..92273c95edf 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/pl061.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -706,6 +707,16 @@ static struct clcd_board clcd_plat_data = {
 	.remove		= versatile_clcd_remove,
 };
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= IRQ_GPIO0_START,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= IRQ_GPIO1_START,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -768,8 +779,8 @@ AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 9bfdb30e1f3..bf44c61bd1f 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -122,4 +122,13 @@
 #define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
 #define IRQ_SIC_END		63
 
-#define NR_IRQS			64
+#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
+#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
+#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
+#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
+#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
+#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
+#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
+#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
+
+#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index aa051c0884f..7419451fdf0 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -45,6 +46,16 @@ static struct mmc_platform_data mmc1_plat_data = {
 	.status		= mmc_status,
 };
 
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+	.gpio_base	= 24,
+	.irq_base	= IRQ_GPIO3_START,
+};
+
 #define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
 #define UART3_DMA	{ 0x86, 0x87 }
 #define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
@@ -70,8 +81,8 @@ AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
 AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    NULL);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart3_device,
-- 
cgit v1.2.3


From c652d780c9cf7f860141de232b37160fe013feca Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Mon, 6 Jul 2009 20:16:33 +0900
Subject: sh: Add ftrace syscall tracing support

Now that I've added TIF_SYSCALL_FTRACE the thread flags do not fit into
a single byte any more. Code testing them now needs to be aware of the
upper and lower bytes.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                   |  1 +
 arch/sh/include/asm/syscall_32.h  |  1 +
 arch/sh/include/asm/thread_info.h | 11 ++++---
 arch/sh/kernel/Makefile_32        |  1 +
 arch/sh/kernel/entry-common.S     | 18 ++++++++---
 arch/sh/kernel/ftrace.c           | 68 +++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/ptrace_32.c        |  8 +++++
 arch/sh/lib/mcount.S              |  2 +-
 8 files changed, 100 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 801a4a79ffe..29e41ec6537 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -32,6 +32,7 @@ config SUPERH32
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FTRACE_SYSCALLS
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 
diff --git a/arch/sh/include/asm/syscall_32.h b/arch/sh/include/asm/syscall_32.h
index 6f83f2cc45c..7d80df4f09c 100644
--- a/arch/sh/include/asm/syscall_32.h
+++ b/arch/sh/include/asm/syscall_32.h
@@ -65,6 +65,7 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	case 3: args[2] = regs->regs[6];
 	case 2: args[1] = regs->regs[5];
 	case 1:	args[0] = regs->regs[4];
+	case 0:
 		break;
 	default:
 		BUG();
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index f09ac480629..499e315f4be 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -97,7 +97,7 @@ static inline struct thread_info *current_thread_info(void)
 
 extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
 extern void free_thread_info(struct thread_info *ti);
- 
+
 #endif /* THREAD_SHIFT < PAGE_SHIFT */
 
 #endif /* __ASSEMBLY__ */
@@ -116,6 +116,7 @@ extern void free_thread_info(struct thread_info *ti);
 #define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
 #define TIF_SECCOMP		6	/* secure computing */
 #define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
+#define TIF_SYSCALL_FTRACE	8	/* for ftrace syscall instrumentation */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18
@@ -129,25 +130,27 @@ extern void free_thread_info(struct thread_info *ti);
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SYSCALL_FTRACE	(1 << TIF_SYSCALL_FTRACE)
 #define _TIF_USEDFPU		(1 << TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 /*
- * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we
+ * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within 2 bytes, or we
  * blow the tst immediate size constraints and need to fix up
  * arch/sh/kernel/entry-common.S.
  */
 
 /* work to do in syscall trace */
 #define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
-				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP    | \
+				 _TIF_SYSCALL_FTRACE)
 
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
 				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
 				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_SYSCALL_FTRACE)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 9411e3e31e6..fee924a9c46 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -29,6 +29,7 @@ obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index d62359cfbbe..d62175650c5 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -131,7 +131,7 @@ ENTRY(resume_userspace)
 	 nop
 #endif
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_WORK_MASK, r0
+	tst	#(_TIF_WORK_MASK & 0xff), r0
 	bt/s	__restore_all
 	 tst	#_TIF_NEED_RESCHED, r0
 
@@ -163,7 +163,7 @@ work_resched:
 #endif
 	!
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_WORK_MASK, r0
+	tst	#(_TIF_WORK_MASK & 0xff), r0
 	bt	__restore_all
 	bra	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
@@ -181,7 +181,7 @@ work_resched:
 syscall_exit_work:
 	! r0: current_thread_info->flags
 	! r8: current_thread_info
-	tst	#_TIF_WORK_SYSCALL_MASK, r0
+	tst	#(_TIF_WORK_SYSCALL_MASK & 0xff), r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -331,8 +331,12 @@ ENTRY(system_call)
 	!
 	get_current_thread_info r8, r10
 	mov.l	@(TI_FLAGS,r8), r8
-	mov	#_TIF_WORK_SYSCALL_MASK, r10
+	mov	#(_TIF_WORK_SYSCALL_MASK & 0xff), r10
+	mov	#(_TIF_WORK_SYSCALL_MASK >> 8), r9
 	tst	r10, r8
+	shll8	r9
+	bf	syscall_trace_entry
+	tst	r9, r8
 	bf	syscall_trace_entry
 	!
 	mov.l	2f, r8			! Number of syscalls
@@ -359,7 +363,11 @@ syscall_exit:
 	!
 	get_current_thread_info r8, r0
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
-	tst	#_TIF_ALLWORK_MASK, r0
+	tst	#(_TIF_ALLWORK_MASK & 0xff), r0
+	mov	#(_TIF_ALLWORK_MASK >> 8), r1
+	bf	syscall_exit_work
+	shlr8	r0
+	tst	r0, r1
 	bf	syscall_exit_work
 	bra	__restore_all
 	 nop
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 066f37dc32a..4f62eced0ae 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -18,6 +18,8 @@
 #include <linux/io.h>
 #include <asm/ftrace.h>
 #include <asm/cacheflush.h>
+#include <asm/unistd.h>
+#include <trace/syscall.h>
 
 static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
 
@@ -131,3 +133,69 @@ int __init ftrace_dyn_arch_init(void *data)
 
 	return 0;
 }
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+
+extern unsigned long __start_syscalls_metadata[];
+extern unsigned long __stop_syscalls_metadata[];
+extern unsigned long *sys_call_table;
+
+static struct syscall_metadata **syscalls_metadata;
+
+static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
+{
+	struct syscall_metadata *start;
+	struct syscall_metadata *stop;
+	char str[KSYM_SYMBOL_LEN];
+
+
+	start = (struct syscall_metadata *)__start_syscalls_metadata;
+	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
+	kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str);
+
+	for ( ; start < stop; start++) {
+		if (start->name && !strcmp(start->name, str))
+			return start;
+	}
+
+	return NULL;
+}
+
+#define FTRACE_SYSCALL_MAX	(NR_syscalls - 1)
+
+struct syscall_metadata *syscall_nr_to_meta(int nr)
+{
+	if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0)
+		return NULL;
+
+	return syscalls_metadata[nr];
+}
+
+void arch_init_ftrace_syscalls(void)
+{
+	int i;
+	struct syscall_metadata *meta;
+	unsigned long **psys_syscall_table = &sys_call_table;
+	static atomic_t refs;
+
+	if (atomic_inc_return(&refs) != 1)
+		goto end;
+
+	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
+					FTRACE_SYSCALL_MAX, GFP_KERNEL);
+	if (!syscalls_metadata) {
+		WARN_ON(1);
+		return;
+	}
+
+	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
+		meta = find_syscall_meta(psys_syscall_table[i]);
+		syscalls_metadata[i] = meta;
+	}
+	return;
+
+	/* Paranoid: avoid overflow */
+end:
+	atomic_dec(&refs);
+}
+#endif /* CONFIG_FTRACE_SYSCALLS */
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index 3392e835a37..c198eceaee9 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -34,6 +34,8 @@
 #include <asm/syscalls.h>
 #include <asm/fpu.h>
 
+#include <trace/syscall.h>
+
 /*
  * This routine will get a word off of the process kernel stack.
  */
@@ -459,6 +461,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1L;
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+		ftrace_syscall_enter(regs);
+
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[3],
 				    regs->regs[4], regs->regs[5],
@@ -475,6 +480,9 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
 				   regs->regs[0]);
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+		ftrace_syscall_exit(regs);
+
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, step);
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index cb87ef580b3..71e87f9b4fd 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -72,7 +72,7 @@ ftrace_caller:
 	mov.l	@r0, r0
 	tst	r0, r0
 	bf	ftrace_stub
-	
+
 	MCOUNT_ENTER()
 
 	.globl ftrace_call
-- 
cgit v1.2.3


From eb7fffa39a3f114832df54a3e373d7580d8fe757 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:41:31 +0100
Subject: [ARM] realview: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                           |  1 +
 arch/arm/mach-realview/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-realview/realview_eb.c       | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb1176.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb11mp.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pba8.c     | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pbx.c      | 22 +++++++++++++++++++---
 7 files changed, 102 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm/mach-realview/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e4971e4fa56..0dd29eb4a0e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -217,6 +217,7 @@ config ARCH_REALVIEW
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e08a9..abd13b44867 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void)
 		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -189,9 +205,9 @@ AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71a67c..17fbb0e889b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void)
 	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -164,9 +180,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b1694390..fdd042b85f4 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void)
 	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -166,9 +182,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb8657..70bba9900d9 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void)
 	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -156,9 +172,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57240a..ce6c5d25fbe 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void)
 		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -176,9 +192,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-- 
cgit v1.2.3


From f386c61fe1a1f36f0e434f1b577e6b112698caf7 Mon Sep 17 00:00:00 2001
From: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date: Sun, 5 Jul 2009 12:08:06 -0700
Subject: gcov: exclude code operating in userspace from profiling

Fix for this issue on x86_64:

rostedt@goodmis.org wrote:
> On bootup of the latest kernel my init segfaults. Debugging it,
> I found  that vread_tsc (a vsyscall) increments some strange
> kernel memory:
>
> 0000000000000000 <vread_tsc>:
>    0:   55                      push   %rbp
>    1:   48 ff 05 00 00 00 00    incq   0(%rip)
>                         # 8 <vread_tsc+0x8>
>                         4: R_X86_64_PC32        .bss+0x3c
>    8:   48 89 e5                mov    %rsp,%rbp
>    b:   66 66 90                xchg   %ax,%ax
>    e:   48 ff 05 00 00 00 00    incq   0(%rip)
>                         # 15 <vread_tsc+0x15>
>                         11: R_X86_64_PC32       .bss+0x44
>   15:   66 66 90                xchg   %ax,%ax
>   18:   48 ff 05 00 00 00 00    incq   0(%rip)
>                         # 1f <vread_tsc+0x1f>
>                         1b: R_X86_64_PC32       .bss+0x4c
>   1f:   0f 31                   rdtsc
>
>
> Those "incq" is very bad to happen in vsyscall memory, since
> userspace can not modify it. You need to make something prevent
> profiling of vsyscall  memory (like I do with ftrace).

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/Makefile | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6c327b852e2..430d5b24af7 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -26,6 +26,8 @@ CFLAGS_tsc.o		:= $(nostackp)
 CFLAGS_paravirt.o	:= $(nostackp)
 GCOV_PROFILE_vsyscall_64.o	:= n
 GCOV_PROFILE_hpet.o		:= n
+GCOV_PROFILE_tsc.o		:= n
+GCOV_PROFILE_paravirt.o		:= n
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
-- 
cgit v1.2.3


From a2e1b4c31257c07f148a89eb7eea7ca959fd0642 Mon Sep 17 00:00:00 2001
From: Mark Langsdorf <mark.langsdorf@amd.com>
Date: Sun, 26 Jul 2009 10:55:25 -0500
Subject: [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states

Provide support for family 0xf processors with 2 P-states
below the elevator voltage.  Remove the checks that prevent
this configuration from being supported and increase the
transition voltage to prevent errors during the transition.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 30 +++++++++++-------------------
 arch/x86/kernel/cpu/cpufreq/powernow-k8.h |  3 ++-
 2 files changed, 13 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 81cbe64ed6b..ae068f59603 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -299,7 +299,7 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
 static int transition_fid_vid(struct powernow_k8_data *data,
 		u32 reqfid, u32 reqvid)
 {
-	if (core_voltage_pre_transition(data, reqvid))
+	if (core_voltage_pre_transition(data, reqvid, reqfid))
 		return 1;
 
 	if (core_frequency_transition(data, reqfid))
@@ -327,17 +327,20 @@ static int transition_fid_vid(struct powernow_k8_data *data,
 
 /* Phase 1 - core voltage transition ... setup voltage */
 static int core_voltage_pre_transition(struct powernow_k8_data *data,
-		u32 reqvid)
+		u32 reqvid, u32 reqfid)
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
-	u32 maxvid, lo;
+	u32 maxvid, lo, rvomult = 1;
 
 	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
 		"reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
+	if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+		rvomult = 2;
+	rvosteps *= rvomult;
 	rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
 	maxvid = 0x1f & (maxvid >> 16);
 	dprintk("ph1 maxvid=0x%x\n", maxvid);
@@ -351,7 +354,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data,
 			return 1;
 	}
 
-	while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+	while ((rvosteps > 0) &&
+			((rvomult * data->rvo + data->currvid) > reqvid)) {
 		if (data->currvid == maxvid) {
 			rvosteps = 0;
 		} else {
@@ -384,13 +388,6 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 	u32 vcoreqfid, vcocurrfid, vcofiddiff;
 	u32 fid_interval, savevid = data->currvid;
 
-	if ((reqfid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
-				"0x%x 0x%x\n", reqfid, data->currfid);
-		return 1;
-	}
-
 	if (data->currfid == reqfid) {
 		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
 				data->currfid);
@@ -407,6 +404,9 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 	vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
 	    : vcoreqfid - vcocurrfid;
 
+	if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+		vcofiddiff = 0;
+
 	while (vcofiddiff > 2) {
 		(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
 
@@ -1081,14 +1081,6 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data,
 		return 0;
 	}
 
-	if ((fid < HI_FID_TABLE_BOTTOM) &&
-	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX
-		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
-		       data->currfid, fid);
-		return 1;
-	}
-
 	dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
 		smp_processor_id(), fid, vid);
 	freqs.old = find_khz_freq_from_fid(data->currfid);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index c9c1190b5e1..02ce824073c 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -215,7 +215,8 @@ struct pst_s {
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k8", msg)
 
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid);
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+	u32 reqvid, u32 regfid);
 static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid);
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
-- 
cgit v1.2.3


From e2ce0e718ee72e5915d35a6f4af40fa249cd626d Mon Sep 17 00:00:00 2001
From: Simon Kagstrom <simon.kagstrom@netinsight.net>
Date: Tue, 30 Jun 2009 21:42:00 -0400
Subject: [ARM] Kirkwood: Correct header define

Correct define typo (. -> ,)

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/mpp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e021a80c2ca..bc74278ed31 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
-- 
cgit v1.2.3


From bb8c29caffdda55d3df0315ff2485f7df7290b1d Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 7 Jul 2009 16:37:05 +0200
Subject: [S390] udelay: disable lockdep to avoid false positives

Our udelay implementation enables interrupts to receive a special timer
interrupt regardless of the context it is called from.
This might lead to false positive lockdep reports. Since lockdep isn't
aware of the fact that only a single interrupt source is enabled it
warns about possible deadlocks that in reality won't happen, like
the one below.
To fix this disable lockdep before enabling interrupts.

[ 254.040888] =================================
[ 254.040904] [ INFO: inconsistent lock state ]
[ 254.040910] 2.6.30 #9
[ 254.040914] ---------------------------------
[ 254.040920] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[ 254.040927] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 254.040934] (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0
[ 254.040961] {IN-HARDIRQ-W} state was registered at:
[ 254.040969] [<0000000000096f74>] __lock_acquire+0x9d4/0x188c
[ 254.040985] [<0000000000097f68>] lock_acquire+0x13c/0x16c
[ 254.040998] [<00000000004527e0>] _spin_lock+0x74/0xb8
[ 254.041016] [<0000000000457eb2>] do_IRQ+0xde/0x208
[ 254.041031] [<000000000002d190>] io_return+0x0/0x8
[ 254.041049] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114
[ 254.041066] irq event stamp: 259629
[ 254.041076] hardirqs last enabled at (259628): [<000000000045238e>] _spin_unlock_irq+0x5e/0x9c
[ 254.041095] hardirqs last disabled at (259629): [<000000000045292e>] _spin_lock_irq+0x4a/0xc4
[ 254.041126] softirqs last enabled at (259614): [<000000000006500e>] __do_softirq+0x296/0x2b0
[ 254.041137] softirqs last disabled at (259619): [<0000000000024cf6>] do_softirq+0x102/0x108
[ 254.041147]
[ 254.041148] other info that might help us debug this:
[ 254.041153] 2 locks held by swapper/0:
[ 254.041157] #0: (&priv->timer){+.-...}, at: [<000000000006bf9a>] run_timer_softirq+0x19a/0x340
[ 254.041170] #1: (sch->lock){?.-...}, at: [<00000000002e4778>] ccw_device_timeout+0x48/0x2f0
[ 254.041182]
[ 254.041310] Call Trace:
[ 254.041313] ([<00000000000174fc>] show_trace+0x16c/0x170)
[ 254.041321] [<0000000000017578>] show_stack+0x78/0x104
[ 254.041327] [<000000000044d0ca>] dump_stack+0xc6/0xd4
[ 254.041342] [<00000000000949b4>] print_usage_bug+0x1c8/0x1fc
[ 254.041353] [<0000000000094e8a>] mark_lock+0x4a2/0x670
[ 254.041364] [<00000000000950e2>] mark_held_locks+0x8a/0xb4
[ 254.041375] [<0000000000095398>] trace_hardirqs_on_caller+0x74/0x1ac
[ 254.041388] [<00000000000954fa>] trace_hardirqs_on+0x2a/0x38
[ 254.041402] [<000000000025f1ec>] __udelay_disabled+0xac/0xfc
[ 254.041419] [<000000000025f432>] __udelay+0x12a/0x148
[ 254.041433] [<00000000002d64d8>] cio_commit_config+0x170/0x290
[ 254.041451] [<00000000002d6978>] cio_disable_subchannel+0x120/0x1cc
[ 254.041468] [<00000000002e32a4>] ccw_device_recog_done+0x54/0x2f4
[ 254.041485] [<00000000002e3638>] ccw_device_sense_id_done+0x50/0x90
[ 254.041508] [<00000000002e615a>] snsid_callback+0xfa/0x3a8
[ 254.041515] [<00000000002dd96c>] ccwreq_stop+0x80/0x90
[ 254.041523] [<00000000002dda8e>] ccw_request_timeout+0xc2/0xd0
[ 254.041530] [<00000000002e2f70>] ccw_device_request_event+0x58/0x90
[ 254.041537] [<00000000002e47ae>] ccw_device_timeout+0x7e/0x2f0
[ 254.041555] [<000000000006c02a>] run_timer_softirq+0x22a/0x340
[ 254.041566] [<0000000000064eb0>] __do_softirq+0x138/0x2b0
[ 254.041578] [<0000000000024cf6>] do_softirq+0x102/0x108
[ 254.041590] [<00000000000647ce>] irq_exit+0xee/0x114
[ 254.041603] [<0000000000457d88>] do_extint+0x130/0x17c
[ 254.041617] [<000000000002d41e>] ext_no_vtime+0x1e/0x22
[ 254.041631] [<0000000000029faa>] vtime_stop_cpu+0xbe/0x114
[ 254.041646] ([<0000000000029f58>] vtime_stop_cpu+0x6c/0x114)
[ 254.041662] [<000000000001d842>] cpu_idle+0x122/0x1c0
[ 254.041679] [<00000000004482c6>] start_secondary+0xce/0xe0
[ 254.041696] [<0000000000000000>] 0x0
[ 254.041715] [<0000000000000000>] 0x0
[ 254.041745] INFO: lockdep is turned off.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/lib/delay.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 3f5f680726e..97c1eca83cc 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -36,9 +36,11 @@ static void __udelay_disabled(unsigned long usecs)
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
 	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	lockdep_off();
 	trace_hardirqs_on();
 	__load_psw_mask(mask);
 	local_irq_disable();
+	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);
 	set_clock_comparator(S390_lowcore.clock_comparator);
-- 
cgit v1.2.3


From 81088819d588ba4d2dce3bf083fafc91974b14e0 Mon Sep 17 00:00:00 2001
From: Frank Munzert <munzert@de.ibm.com>
Date: Tue, 7 Jul 2009 16:37:07 +0200
Subject: [S390] shutdown actions: save/return rc from init function

We always returned -EINVAL when setting of a shutdown action failed. This was
misleading, if for example the hardware did not support the shutdown action.
Now we save each shutdown action's init return code and return it when the
action is being set.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ipl.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index b8bf4b14006..371a2d88f4a 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -70,6 +70,7 @@ struct shutdown_action {
 	char *name;
 	void (*fn) (struct shutdown_trigger *trigger);
 	int (*init) (void);
+	int init_rc;
 };
 
 static char *ipl_type_str(enum ipl_type type)
@@ -1486,11 +1487,13 @@ static int set_trigger(const char *buf, struct shutdown_trigger *trigger,
 	int i;
 
 	for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
-		if (!shutdown_actions_list[i])
-			continue;
 		if (sysfs_streq(buf, shutdown_actions_list[i]->name)) {
-			trigger->action = shutdown_actions_list[i];
-			return len;
+			if (shutdown_actions_list[i]->init_rc) {
+				return shutdown_actions_list[i]->init_rc;
+			} else {
+				trigger->action = shutdown_actions_list[i];
+				return len;
+			}
 		}
 	}
 	return -EINVAL;
@@ -1640,8 +1643,8 @@ static void __init shutdown_actions_init(void)
 	for (i = 0; i < SHUTDOWN_ACTIONS_COUNT; i++) {
 		if (!shutdown_actions_list[i]->init)
 			continue;
-		if (shutdown_actions_list[i]->init())
-			shutdown_actions_list[i] = NULL;
+		shutdown_actions_list[i]->init_rc =
+			shutdown_actions_list[i]->init();
 	}
 }
 
-- 
cgit v1.2.3


From 2651fa2bcb1a7b06793441d50dcbf98efda592c6 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 7 Jul 2009 16:37:08 +0200
Subject: [S390] perf_counter build fix

Add PERF_COUNTER_INDEX_OFFSET define to fix this build bug:

kernel/perf_counter.c: In function 'perf_counter_index':
kernel/perf_counter.c:1889: error: 'PERF_COUNTER_INDEX_OFFSET' undeclared

Same fix as for FRV since s390 doesn't support hw counters.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/perf_counter.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
index a7205a3828c..7015188c2cc 100644
--- a/arch/s390/include/asm/perf_counter.h
+++ b/arch/s390/include/asm/perf_counter.h
@@ -6,3 +6,5 @@
 
 static inline void set_perf_counter_pending(void) {}
 static inline void clear_perf_counter_pending(void) {}
+
+#define PERF_COUNTER_INDEX_OFFSET 0
-- 
cgit v1.2.3


From 5075baca2e95840d76210c3cfda56134007462c9 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 7 Jul 2009 16:37:09 +0200
Subject: [S390] add __ucmpdi2() helper function

Provide __ucmpdi2() helper function on 31 bit so we don't run
again and again in compile errors like this one:

kernel/built-in.o: In function `T.689':
perf_counter.c:(.text+0x56c86): undefined reference to `__ucmpdi2'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/lib/Makefile  |  2 +-
 arch/s390/lib/ucmpdi2.c | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 arch/s390/lib/ucmpdi2.c

(limited to 'arch')

diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index ab6735df2d2..97975ec7a27 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,6 +3,6 @@
 #
 
 lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
-obj-$(CONFIG_32BIT) += div64.o qrnnd.o
+obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/ucmpdi2.c b/arch/s390/lib/ucmpdi2.c
new file mode 100644
index 00000000000..3e05ff53258
--- /dev/null
+++ b/arch/s390/lib/ucmpdi2.c
@@ -0,0 +1,26 @@
+#include <linux/module.h>
+
+union ull_union {
+	unsigned long long ull;
+	struct {
+		unsigned int high;
+		unsigned int low;
+	} ui;
+};
+
+int __ucmpdi2(unsigned long long a, unsigned long long b)
+{
+	union ull_union au = {.ull = a};
+	union ull_union bu = {.ull = b};
+
+	if (au.ui.high < bu.ui.high)
+		return 0;
+	else if (au.ui.high > bu.ui.high)
+		return 2;
+	if (au.ui.low < bu.ui.low)
+		return 0;
+	else if (au.ui.low > bu.ui.low)
+		return 2;
+	return 1;
+}
+EXPORT_SYMBOL(__ucmpdi2);
-- 
cgit v1.2.3


From fca3e357d5de31e484c3e0ec7f356e4fc488eb7f Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 7 Jul 2009 16:37:10 +0200
Subject: [S390] set SCHED_OMIT_FRAME_POINTER for s390

The frame pointer is useless for s390 in the sched.c code.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e577839f307..4cd12b5202a 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -96,6 +96,10 @@ config S390
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_COUNTERS
 
+config SCHED_OMIT_FRAME_POINTER
+	bool
+	default y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
-- 
cgit v1.2.3


From 25ca1251dc55673da1f3c6ddc1bf93fbb7fc83fc Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 7 Jul 2009 16:37:12 +0200
Subject: [S390] add generic atomic64 support for 31 bit

Performance counters need 64 bit atomic operations.
To keep the patch small we use the simple generic atomic64_t implementation.
The native implementation follows with the next kernel.

Fixes this build bug:

In file included from kernel/sched.c:42:
include/linux/perf_counter.h:427: error: expected specifier-qualifier-list before 'atomic64_t'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig              | 1 +
 arch/s390/include/asm/atomic.h | 7 ++++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 4cd12b5202a..f46a1b50dde 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,7 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_COUNTERS
+	select GENERIC_ATOMIC64 if !64BIT
 
 config SCHED_OMIT_FRAME_POINTER
 	bool
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index fca9dffcc66..c7d0abfb0f0 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -268,7 +268,12 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
 #undef __CSG_LOOP
-#endif
+
+#else /* __s390x__ */
+
+#include <asm-generic/atomic64.h>
+
+#endif /* __s390x__ */
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
-- 
cgit v1.2.3


From 07606309ff5a9136e340b9ca87c831650c1ec47a Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 7 Jul 2009 16:37:13 +0200
Subject: [S390] define KTIME_SCALAR for 32-bit s390

32-bit s390 has efficient support for 64/32-bit conversions, define
KTIME_SCALAR to enable the use of the plain scalar nanosecond based
representation of ktime.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index f46a1b50dde..2ae5d72f47e 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -121,6 +121,9 @@ config 32BIT
 	bool
 	default y if !64BIT
 
+config KTIME_SCALAR
+	def_bool 32BIT
+
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
-- 
cgit v1.2.3


From 551a232c87b7781712c57c31f3e0851303d9f591 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 17 Jun 2009 18:13:50 +0000
Subject: powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

In particular, pSeries_lpar_hpte_insert() goes from 185 instructions
to 77 instructions as a result of this patch. Luckily that code
isn't called very often ...

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7284    1552     296    9132    23ac platforms/pseries/lpar.o

size after:
   text    data     bss     dec     hex filename
   5806    1096     296    7198    1c1e platforms/pseries/lpar.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/lpar.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index e3139fa5e55..903eb9eec68 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -286,7 +286,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	unsigned long hpte_v, hpte_r;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+		pr_devel("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
 			 "rflags=%lx, vflags=%lx, psize=%d)\n",
 			 hpte_group, va, pa, rflags, vflags, psize);
 
@@ -294,7 +294,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	hpte_r = hpte_encode_r(pa, psize) | rflags;
 
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+		pr_devel(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
 	/* Now fill in the actual HPTE */
 	/* Set CEC cookie to 0         */
@@ -311,7 +311,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
 	if (unlikely(lpar_rc == H_PTEG_FULL)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" full\n");
+			pr_devel(" full\n");
 		return -1;
 	}
 
@@ -322,11 +322,11 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	 */
 	if (unlikely(lpar_rc != H_SUCCESS)) {
 		if (!(vflags & HPTE_V_BOLTED))
-			pr_debug(" lpar err %lu\n", lpar_rc);
+			pr_devel(" lpar err %lu\n", lpar_rc);
 		return -2;
 	}
 	if (!(vflags & HPTE_V_BOLTED))
-		pr_debug(" -> slot: %lu\n", slot & 7);
+		pr_devel(" -> slot: %lu\n", slot & 7);
 
 	/* Because of iSeries, we have to pass down the secondary
 	 * bucket bit here as well
@@ -418,17 +418,17 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot,
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
 
-	pr_debug("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
+	pr_devel("    update: avpnv=%016lx, hash=%016lx, f=%lx, psize: %d ...",
 		 want_v, slot, flags, psize);
 
 	lpar_rc = plpar_pte_protect(flags, slot, want_v);
 
 	if (lpar_rc == H_NOT_FOUND) {
-		pr_debug("not found !\n");
+		pr_devel("not found !\n");
 		return -1;
 	}
 
-	pr_debug("ok\n");
+	pr_devel("ok\n");
 
 	BUG_ON(lpar_rc != H_SUCCESS);
 
@@ -503,7 +503,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 	unsigned long lpar_rc;
 	unsigned long dummy1, dummy2;
 
-	pr_debug("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+	pr_devel("    inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
 		 slot, va, psize, local);
 
 	want_v = hpte_encode_avpn(va, psize, ssize);
-- 
cgit v1.2.3


From d258e64ef595792d6f749518354b69583e9a97f4 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 28 Jun 2009 06:26:10 +0000
Subject: powerpc: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/tlb_hash64.c                 | 2 +-
 arch/powerpc/oprofile/cell/vma_map.c         | 2 +-
 arch/powerpc/platforms/powermac/cpufreq_64.c | 2 +-
 arch/powerpc/platforms/powermac/pic.c        | 2 +-
 arch/powerpc/platforms/ps3/system-bus.c      | 1 -
 arch/powerpc/sysdev/fsl_rio.c                | 2 +-
 arch/powerpc/sysdev/ppc4xx_pci.c             | 4 ++--
 7 files changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 1be1b5e5979..937eb90677d 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -72,7 +72,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = get_slice_psize(mm, addr);;
+		psize = get_slice_psize(mm, addr);
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 258fa4411e9..c591339daf5 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -185,7 +185,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 			goto fail;
 
 		if (shdr_str.sh_type != SHT_STRTAB)
-			goto fail;;
+			goto fail;
 
 		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
 			if (copy_from_user(&sym, spu_elf_start +
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 22ecfbe7183..708c7513337 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -251,7 +251,7 @@ static void g5_pfunc_switch_volt(int speed_mode)
 static struct pmf_function *pfunc_cpu_setfreq_high;
 static struct pmf_function *pfunc_cpu_setfreq_low;
 static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;;
+static struct pmf_function *pfunc_slewing_done;
 
 static int g5_pfunc_switch_freq(int speed_mode)
 {
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dce73634910..d212006a5b3 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -609,7 +609,7 @@ static int pmacpic_find_viaint(void)
 	np = of_find_node_by_name(NULL, "via-pmu");
 	if (np == NULL)
 		goto not_found;
-	viaint = irq_of_parse_and_map(np, 0);;
+	viaint = irq_of_parse_and_map(np, 0);
 
 not_found:
 #endif /* CONFIG_ADB_PMU */
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 9fead0faf38..3f763c5284a 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -284,7 +284,6 @@ static int ps3_sb_free_mmio_region(struct ps3_mmio_region *r)
 	int result;
 
 	dump_mmio_region(r);
-;
 	result = lv1_unmap_device_mmio_region(r->dev->bus_id, r->dev->dev_id,
 		r->lpar_addr);
 
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 39db9d1155d..cbb3bed75d3 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -965,7 +965,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr)
 			break;
 		default:
 			str = "Unknown";
-			break;;
+			break;
 		}
 		dev_info(dev, "Hardware port width: %s\n", str);
 
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index daefc93ddff..6ff9d71b4c0 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1531,7 +1531,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		 */
 
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(ep_size));;
+		sa = (0xffffffffffffffffull << ilog2(ep_size));
 
 		/* Setup BAR0 */
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
@@ -1550,7 +1550,7 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
 	} else {
 		/* Calculate window size */
-		sa = (0xffffffffffffffffull << ilog2(size));;
+		sa = (0xffffffffffffffffull << ilog2(size));
 		if (res->flags & IORESOURCE_PREFETCH)
 			sa |= 0x8;
 
-- 
cgit v1.2.3


From b69e9e931d2c6116921fdb260684e0546285c3c8 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 17 Jun 2009 18:13:53 +0000
Subject: powerpc/pseries: Use pr_devel() in xics.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7720    5488     296   13504    34c0 platforms/pseries/xics.o

size after:
   text    data     bss     dec     hex filename
   7535	   5456	    296	  13287	   33e7	platforms/pseries/xics.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pseries/xics.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index be3581a8c29..419f8a637ff 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -190,10 +190,10 @@ static void xics_unmask_irq(unsigned int virq)
 	int call_status;
 	int server;
 
-	pr_debug("xics: unmask virq %d\n", virq);
+	pr_devel("xics: unmask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
-	pr_debug(" -> map to hwirq 0x%x\n", irq);
+	pr_devel(" -> map to hwirq 0x%x\n", irq);
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
 		return;
 
@@ -252,7 +252,7 @@ static void xics_mask_irq(unsigned int virq)
 {
 	unsigned int irq;
 
-	pr_debug("xics: mask virq %d\n", virq);
+	pr_devel("xics: mask virq %d\n", virq);
 
 	irq = (unsigned int)irq_map[virq].hwirq;
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
@@ -414,7 +414,7 @@ static int xics_host_match(struct irq_host *h, struct device_node *node)
 static int xics_host_map(struct irq_host *h, unsigned int virq,
 			 irq_hw_number_t hw)
 {
-	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
+	pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
 
 	/* Insert the interrupt mapping into the radix tree for fast lookup */
 	irq_radix_revmap_insert(xics_host, virq, hw);
-- 
cgit v1.2.3


From a1ac38ab98e8a79ce225347b725f3b9751c70f1e Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 17 Jun 2009 18:13:54 +0000
Subject: powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text	   data	    bss	    dec	    hex	filename
   1508	     48	     28	   1584	    630	powerpc/mm/mmu_context_nohash.o

size after:
   text	   data	    bss	    dec	    hex	filename
   1088	      0	     28	   1116	    45c	powerpc/mm/mmu_context_nohash.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/mmu_context_nohash.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 8343986809c..92a197117d5 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -89,7 +89,7 @@ static unsigned int steal_context_smp(unsigned int id)
 				id = first_context;
 			continue;
 		}
-		pr_debug("[%d] steal context %d from mm @%p\n",
+		pr_devel("[%d] steal context %d from mm @%p\n",
 			 smp_processor_id(), id, mm);
 
 		/* Mark this mm has having no context anymore */
@@ -126,7 +126,7 @@ static unsigned int steal_context_up(unsigned int id)
 	/* Pick up the victim mm */
 	mm = context_mm[id];
 
-	pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+	pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
 
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
@@ -180,7 +180,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	spin_lock(&context_lock);
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+	pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
 		 cpu, next, next->context.active, next->context.id);
 #endif
 
@@ -189,7 +189,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next->context.active++;
 	if (prev) {
 #ifndef DEBUG_STEAL_ONLY
-		pr_debug(" old context %p active was: %d\n",
+		pr_devel(" old context %p active was: %d\n",
 			 prev, prev->context.active);
 #endif
 		WARN_ON(prev->context.active < 1);
@@ -236,7 +236,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next->context.id = id;
 
 #ifndef DEBUG_STEAL_ONLY
-	pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+	pr_devel("[%d] picked up new id %d, nrf is now %d\n",
 		 cpu, id, nr_free_contexts);
 #endif
 
@@ -247,7 +247,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	 * local TLB for it and unmark it before we use it
 	 */
 	if (test_bit(id, stale_map[cpu])) {
-		pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+		pr_devel("[%d] flushing stale context %d for mm @%p !\n",
 			 cpu, id, next);
 		local_flush_tlb_mm(next);
 
@@ -314,13 +314,13 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
-		pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
 		stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
 		break;
 #ifdef CONFIG_HOTPLUG_CPU
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
 		kfree(stale_map[cpu]);
 		stale_map[cpu] = NULL;
 		break;
-- 
cgit v1.2.3


From 3665ee36fac936b2ad0ab170d101a3e2c8eb3fd2 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 20 Jun 2009 13:37:00 +0000
Subject: powerpc/perf_counter: Remove duplicated #include

Remove duplicated #include('s) in
  arch/powerpc/kernel/mpc7450-pmu.c
  arch/powerpc/kernel/ppc970-pmu.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/mpc7450-pmu.c | 1 -
 arch/powerpc/kernel/ppc970-pmu.c  | 1 -
 2 files changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 75ff47fed7b..c244133c67a 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 6637c87fe70..833097ac45d 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -10,7 +10,6 @@
  */
 #include <linux/string.h>
 #include <linux/perf_counter.h>
-#include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
-- 
cgit v1.2.3


From 651e2dd2a1c47bb078d446f123a9ae950ba7a1f0 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 17 Jun 2009 18:13:51 +0000
Subject: powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   3261     416       4    3681     e61 arch/powerpc/mm/slb.o

size after:
   text    data     bss     dec     hex filename
   2861     248       4    3113     c29 arch/powerpc/mm/slb.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/slb.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 3b52c80e5e3..5b7038f248b 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -14,8 +14,6 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#undef DEBUG
-
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
@@ -27,11 +25,6 @@
 #include <linux/compiler.h>
 #include <asm/udbg.h>
 
-#ifdef DEBUG
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG pr_debug
-#endif
 
 extern void slb_allocate_realmode(unsigned long ea);
 extern void slb_allocate_user(unsigned long ea);
@@ -285,13 +278,13 @@ void slb_initialize(void)
 		patch_slb_encoding(slb_compare_rr_to_size,
 				   mmu_slb_size);
 
-		DBG("SLB: linear  LLP = %04lx\n", linear_llp);
-		DBG("SLB: io      LLP = %04lx\n", io_llp);
+		pr_devel("SLB: linear  LLP = %04lx\n", linear_llp);
+		pr_devel("SLB: io      LLP = %04lx\n", io_llp);
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 		patch_slb_encoding(slb_miss_kernel_load_vmemmap,
 				   SLB_VSID_KERNEL | vmemmap_llp);
-		DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+		pr_devel("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
 #endif
 	}
 
-- 
cgit v1.2.3


From 29e5fa59e5ebe06d6bd7e04e7752a47ead23f89e Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 17 Jun 2009 18:13:51 +0000
Subject: powerpc: Use pr_devel() in arch/powerpc/mm/gup.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   3252     384       0    3636     e34 arch/powerpc/mm/gup.o

size after:
   text    data     bss     dec     hex filename
   2576      96       0    2672     a70 arch/powerpc/mm/gup.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/gup.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index bc400c78c97..bc122a120bf 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -159,7 +159,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	int psize;
 #endif
 
-	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+	pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
 
 	start &= PAGE_MASK;
 	addr = start;
@@ -170,7 +170,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 					start, len)))
 		goto slow_irqon;
 
-	pr_debug("  aligned: %lx .. %lx\n", start, end);
+	pr_devel("  aligned: %lx .. %lx\n", start, end);
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* We bail out on slice boundary crossing when hugetlb is
@@ -234,7 +234,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 		do {
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
 			ptep = huge_pte_offset(mm, a);
-			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			pr_devel(" %016lx: huge ptep %p\n", a, ptep);
 			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
 						   &nr))
 				goto slow;
@@ -249,7 +249,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 #ifdef CONFIG_PPC64
 			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
 #endif
-			pr_debug("  %016lx: normal pgd %p\n", addr,
+			pr_devel("  %016lx: normal pgd %p\n", addr,
 				 (void *)pgd_val(pgd));
 			next = pgd_addr_end(addr, end);
 			if (pgd_none(pgd))
@@ -269,7 +269,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 slow:
 		local_irq_enable();
 slow_irqon:
-		pr_debug("  slow path ! nr = %d\n", nr);
+		pr_devel("  slow path ! nr = %d\n", nr);
 
 		/* Try to get the remaining pages with get_user_pages */
 		start += nr << PAGE_SHIFT;
-- 
cgit v1.2.3


From 33875f03307452650309a7d071678b2ca5f2fc26 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 17 Jun 2009 18:13:53 +0000
Subject: powerpc/cell: Use pr_devel() in axon_msi.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7083    1616       0    8699    21fb arch/powerpc/../axon_msi.o

size after:
   text    data     bss     dec     hex filename
   5772    1208       0    6980    1b44 arch/powerpc/../axon_msi.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/axon_msi.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c71498dbf21..aca5741ddc6 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -85,7 +85,7 @@ static inline void axon_msi_debug_setup(struct device_node *dn,
 
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
-	pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
+	pr_devel("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
 
 	dcr_write(msic->dcr_host, dcr_n, val);
 }
@@ -98,7 +98,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 	int retry = 0;
 
 	write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
-	pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
+	pr_devel("axon_msi: original write_offset 0x%x\n", write_offset);
 
 	/* write_offset doesn't wrap properly, so we have to mask it */
 	write_offset &= MSIC_FIFO_SIZE_MASK;
@@ -108,7 +108,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		msi  = le32_to_cpu(msic->fifo_virt[idx]);
 		msi &= 0xFFFF;
 
-		pr_debug("axon_msi: woff %x roff %x msi %x\n",
+		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
 		if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
@@ -123,12 +123,12 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 			 */
 			udelay(1);
 			retry++;
-			pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+			pr_devel("axon_msi: invalid irq 0x%x!\n", msi);
 			continue;
 		}
 
 		if (retry) {
-			pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+			pr_devel("axon_msi: late irq 0x%x, retry %d\n",
 				 msi, retry);
 			retry = 0;
 		}
@@ -332,7 +332,7 @@ static int axon_msi_shutdown(struct of_device *device)
 	struct axon_msic *msic = dev_get_drvdata(&device->dev);
 	u32 tmp;
 
-	pr_debug("axon_msi: disabling %s\n",
+	pr_devel("axon_msi: disabling %s\n",
 		  msic->irq_host->of_node->full_name);
 	tmp  = dcr_read(msic->dcr_host, MSIC_CTRL_REG);
 	tmp &= ~MSIC_CTRL_ENABLE & ~MSIC_CTRL_IRQ_ENABLE;
@@ -349,7 +349,7 @@ static int axon_msi_probe(struct of_device *device,
 	unsigned int virq;
 	int dcr_base, dcr_len;
 
-	pr_debug("axon_msi: setting up dn %s\n", dn->full_name);
+	pr_devel("axon_msi: setting up dn %s\n", dn->full_name);
 
 	msic = kzalloc(sizeof(struct axon_msic), GFP_KERNEL);
 	if (!msic) {
@@ -403,7 +403,7 @@ static int axon_msi_probe(struct of_device *device,
 
 	set_irq_data(virq, msic);
 	set_irq_chained_handler(virq, axon_msi_cascade);
-	pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
+	pr_devel("axon_msi: irq 0x%x setup for axon_msi\n", virq);
 
 	/* Enable the MSIC hardware */
 	msic_dcr_write(msic, MSIC_BASE_ADDR_HI_REG, msic->fifo_phys >> 32);
@@ -484,13 +484,13 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
 
 	addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
 	if (addr == OF_BAD_ADDR) {
-		pr_debug("axon_msi: couldn't translate reg property\n");
+		pr_devel("axon_msi: couldn't translate reg property\n");
 		return;
 	}
 
 	msic->trigger = ioremap(addr, 0x4);
 	if (!msic->trigger) {
-		pr_debug("axon_msi: ioremap failed\n");
+		pr_devel("axon_msi: ioremap failed\n");
 		return;
 	}
 
@@ -498,7 +498,7 @@ void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
 
 	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
 				 msic, &fops_msic)) {
-		pr_debug("axon_msi: debugfs_create_file failed!\n");
+		pr_devel("axon_msi: debugfs_create_file failed!\n");
 		return;
 	}
 }
-- 
cgit v1.2.3


From 30c5af435b2e3e5700b0e4a53ac37a39b3b3516e Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Wed, 17 Jun 2009 18:13:52 +0000
Subject: powerpc: Use pr_devel() in do_dcache_icache_coherency()

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   2036     368       8    2412     96c arch/powerpc/mm/pgtable.o

size after:
   text    data     bss     dec     hex filename
   1677     248       8    1933     78d arch/powerpc/mm/pgtable.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ae1d67cc090..627767d6169 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -129,12 +129,12 @@ static pte_t do_dcache_icache_coherency(pte_t pte)
 	page = pfn_to_page(pfn);
 
 	if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
-		pr_debug("do_dcache_icache_coherency... flushing\n");
+		pr_devel("do_dcache_icache_coherency... flushing\n");
 		flush_dcache_icache_page(page);
 		set_bit(PG_arch_1, &page->flags);
 	}
 	else
-		pr_debug("do_dcache_icache_coherency... already clean\n");
+		pr_devel("do_dcache_icache_coherency... already clean\n");
 	return __pte(pte_val(pte) | _PAGE_HWEXEC);
 }
 
-- 
cgit v1.2.3


From ad9064d5e22a6a24f828dad63c4775c4d7280bd4 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Mon, 29 Jun 2009 13:40:51 +0000
Subject: powerpc: Fix spin_event_timeout() to be robust over context switches

Current implementation of spin_event_timeout can be interrupted by an
IRQ or context switch after testing the condition, but before checking
the timeout.  This can cause the loop to report a timeout when the
condition actually became true in the middle.

This patch adds one final check of the condition upon exit of the loop
if the last test of the condition was still false.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/delay.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
index 1e2eb41fa05..52e4d54da2a 100644
--- a/arch/powerpc/include/asm/delay.h
+++ b/arch/powerpc/include/asm/delay.h
@@ -63,6 +63,8 @@ extern void udelay(unsigned long usecs);
 			udelay(delay);                                         \
 		else                                                           \
 			cpu_relax();                                           \
+	if (!__ret)                                                            \
+		__ret = (condition);                                           \
 	__ret;		                                                       \
 })
 
-- 
cgit v1.2.3


From ea96025a26ab8949adab1a8e81419202f92f3f7f Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 1 Jul 2009 10:59:57 +0000
Subject: powerpc: Don't use alloc_bootmem() in init_IRQ() path

This patch fixes various badnesses like this for all interrupt
controllers:

------------[ cut here ]------------
Badness at c04db9dc [verbose debug info unavailable]
NIP: c04db9dc LR: c04db9ac CTR: 00000000
REGS: c053de30 TRAP: 0700   Not tainted  (2.6.31-rc1-00432-ge69b2b5-dirty)
MSR: 00021000 <ME,CE>  CR: 22020084  XER: 00000000
TASK = c0500480[0] 'swapper' THREAD: c053c000
GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000
GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000
GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4
GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050
NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74
LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74
Call Trace:
[c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable)
[c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108
[c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50
[c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0
[c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c
[c053dfb0] [c04cf374] init_IRQ+0x28/0x3c

p.s. commit 85355bb272db31a3f2dd99d547eef794805e1319 ("powerpc: Fix
mpic alloc warning") missed some alloc_bootmem() instances, this is
now fixed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/82xx/pq2ads-pci-pic.c | 2 +-
 arch/powerpc/sysdev/ipic.c                   | 4 +---
 arch/powerpc/sysdev/mpic.c                   | 9 ++++-----
 arch/powerpc/sysdev/qe_lib/qe_ic.c           | 4 +---
 arch/powerpc/sysdev/uic.c                    | 3 +--
 5 files changed, 8 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index ddf0bdc0fc8..7ee979f323d 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -147,7 +147,7 @@ int __init pq2ads_pci_init_irq(void)
 		goto out;
 	}
 
-	priv = alloc_bootmem(sizeof(struct pq2ads_pci_pic));
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		of_node_put(np);
 		ret = -ENOMEM;
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index a86d3ce01ea..69e2630c906 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -728,12 +728,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	if (ret)
 		return NULL;
 
-	ipic = alloc_bootmem(sizeof(struct ipic));
+	ipic = kzalloc(sizeof(*ipic), GFP_KERNEL);
 	if (ipic == NULL)
 		return NULL;
 
-	memset(ipic, 0, sizeof(struct ipic));
-
 	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index d46de1f0f3e..3981ae4cb58 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -508,9 +508,8 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 	printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
 
 	/* Allocate fixups array */
-	mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+	mpic->fixups = kzalloc(128 * sizeof(*mpic->fixups), GFP_KERNEL);
 	BUG_ON(mpic->fixups == NULL);
-	memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
 
 	/* Init spinlock */
 	spin_lock_init(&mpic->fixup_lock);
@@ -1109,9 +1108,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 			psize /= 4;
 			bits = intvec_top + 1;
 			mapsize = BITS_TO_LONGS(bits) * sizeof(unsigned long);
-			mpic->protected = alloc_bootmem(mapsize);
+			mpic->protected = kzalloc(mapsize, GFP_KERNEL);
 			BUG_ON(mpic->protected == NULL);
-			memset(mpic->protected, 0, mapsize);
 			for (i = 0; i < psize; i++) {
 				if (psrc[i] > intvec_top)
 					continue;
@@ -1353,7 +1351,8 @@ void __init mpic_init(struct mpic *mpic)
 
 #ifdef CONFIG_PM
 	/* allocate memory to save mpic state */
-	mpic->save_data = alloc_bootmem(mpic->num_sources * sizeof(struct mpic_irq_save));
+	mpic->save_data = kmalloc(mpic->num_sources * sizeof(*mpic->save_data),
+				  GFP_KERNEL);
 	BUG_ON(mpic->save_data == NULL);
 #endif
 }
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 63cdf9887f3..074905c3ee5 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -333,12 +333,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	if (ret)
 		return;
 
-	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
+	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
 	if (qe_ic == NULL)
 		return;
 
-	memset(qe_ic, 0, sizeof(struct qe_ic));
-
 	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
 	if (qe_ic->irqhost == NULL)
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index d35405c5943..466ce9ace12 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -258,11 +258,10 @@ static struct uic * __init uic_init_one(struct device_node *node)
 
 	BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
 
-	uic = alloc_bootmem(sizeof(*uic));
+	uic = kzalloc(sizeof(*uic), GFP_KERNEL);
 	if (! uic)
 		return NULL; /* FIXME: panic? */
 
-	memset(uic, 0, sizeof(*uic));
 	spin_lock_init(&uic->lock);
 	indexp = of_get_property(node, "cell-index", &len);
 	if (!indexp || (len != sizeof(u32))) {
-- 
cgit v1.2.3


From 00024be9689963c55cf2ab10ce3fb4502016c09a Mon Sep 17 00:00:00 2001
From: Peter Chubb <peter.chubb@nicta.com.au>
Date: Wed, 8 Jul 2009 13:20:13 +0200
Subject: x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR

Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify
power/cpu_(32|64).c)  renamed cpu_32.c to cpu.c, but did not update
the special compilation flags for the file for the new name.

This patch fixes the compilation flags, and therefore fixes resume
from suspend on my Acer Aspire One.

[rjw: The regression from 2.6.30 fixed by this patch is tracked as
 http://bugzilla.kernel.org/show_bug.cgi?id=13661]

Signed-off-by: Peter Chubb <peterc@nicta.com.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 arch/x86/power/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/power/Makefile b/arch/x86/power/Makefile
index de2abbd0754..a6a198c3362 100644
--- a/arch/x86/power/Makefile
+++ b/arch/x86/power/Makefile
@@ -1,7 +1,7 @@
 # __restore_processor_state() restores %gs after S3 resume and so should not
 # itself be stack-protected
 nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_cpu_$(BITS).o	:= $(nostackp)
+CFLAGS_cpu.o	:= $(nostackp)
 
 obj-$(CONFIG_PM_SLEEP)		+= cpu.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate_$(BITS).o hibernate_asm_$(BITS).o
-- 
cgit v1.2.3


From ad361c9884e809340f6daca80d56a9e9c871690a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 6 Jul 2009 13:05:40 -0700
Subject: Remove multiple KERN_ prefixes from printk formats

Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/avr32/kernel/traps.c                 | 13 ++++++----
 arch/blackfin/kernel/setup.c              | 41 ++++++++++++++++---------------
 arch/blackfin/kernel/traps.c              | 34 ++++++++++++-------------
 arch/m68knommu/kernel/process.c           | 21 ++++++++--------
 arch/m68knommu/kernel/traps.c             |  6 ++---
 arch/mn10300/kernel/traps.c               | 21 ++++++----------
 arch/parisc/kernel/process.c              |  2 +-
 arch/parisc/kernel/traps.c                | 20 +++++++--------
 arch/um/kernel/sysrq.c                    |  4 +--
 arch/x86/kernel/apic/io_apic.c            |  1 -
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c |  2 +-
 arch/x86/kernel/cpu/mcheck/mce.c          | 12 ++++-----
 arch/x86/kernel/e820.c                    |  7 +++---
 arch/x86/kernel/pci-gart_64.c             |  2 +-
 arch/x86/mm/fault.c                       |  9 ++++---
 arch/xtensa/kernel/traps.c                |  6 ++---
 16 files changed, 99 insertions(+), 102 deletions(-)

(limited to 'arch')

diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 6e3d491184e..b91b2044af9 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -32,22 +32,25 @@ void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 
-	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n",
 	       str, err, ++die_counter);
+
+	printk(KERN_EMERG);
+
 #ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
+	printk(KERN_CONT "PREEMPT ");
 #endif
 #ifdef CONFIG_FRAME_POINTER
-	printk("FRAME_POINTER ");
+	printk(KERN_CONT "FRAME_POINTER ");
 #endif
 	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
 		unsigned long did = ocd_read(DID);
-		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+		printk(KERN_CONT "chip: 0x%03lx:0x%04lx rev %lu\n",
 		       (did >> 1) & 0x7ff,
 		       (did >> 12) & 0x7fff,
 		       (did >> 28) & 0xf);
 	} else {
-		printk("cpu: arch %u r%u / core %u r%u\n",
+		printk(KERN_CONT "cpu: arch %u r%u / core %u r%u\n",
 		       current_cpu_data.arch_type,
 		       current_cpu_data.arch_revision,
 		       current_cpu_data.cpu_type,
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 298f023bcc0..6136c33e919 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -408,13 +408,14 @@ static void __init print_memory_map(char *who)
 			bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
 		switch (bfin_memmap.map[i].type) {
 		case BFIN_MEMMAP_RAM:
-				printk("(usable)\n");
-				break;
+			printk(KERN_CONT "(usable)\n");
+			break;
 		case BFIN_MEMMAP_RESERVED:
-				printk("(reserved)\n");
-				break;
-		default:	printk("type %lu\n", bfin_memmap.map[i].type);
-				break;
+			printk(KERN_CONT "(reserved)\n");
+			break;
+		default:
+			printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+			break;
 		}
 	}
 }
@@ -614,19 +615,19 @@ static __init void memory_setup(void)
 	printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
 
 	printk(KERN_INFO "Memory map:\n"
-		KERN_INFO "  fixedcode = 0x%p-0x%p\n"
-		KERN_INFO "  text      = 0x%p-0x%p\n"
-		KERN_INFO "  rodata    = 0x%p-0x%p\n"
-		KERN_INFO "  bss       = 0x%p-0x%p\n"
-		KERN_INFO "  data      = 0x%p-0x%p\n"
-		KERN_INFO "    stack   = 0x%p-0x%p\n"
-		KERN_INFO "  init      = 0x%p-0x%p\n"
-		KERN_INFO "  available = 0x%p-0x%p\n"
+	       "  fixedcode = 0x%p-0x%p\n"
+	       "  text      = 0x%p-0x%p\n"
+	       "  rodata    = 0x%p-0x%p\n"
+	       "  bss       = 0x%p-0x%p\n"
+	       "  data      = 0x%p-0x%p\n"
+	       "    stack   = 0x%p-0x%p\n"
+	       "  init      = 0x%p-0x%p\n"
+	       "  available = 0x%p-0x%p\n"
 #ifdef CONFIG_MTD_UCLINUX
-		KERN_INFO "  rootfs    = 0x%p-0x%p\n"
+	       "  rootfs    = 0x%p-0x%p\n"
 #endif
 #if DMA_UNCACHED_REGION > 0
-		KERN_INFO "  DMA Zone  = 0x%p-0x%p\n"
+	       "  DMA Zone  = 0x%p-0x%p\n"
 #endif
 		, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
 		_stext, _etext,
@@ -859,13 +860,13 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	printk(KERN_INFO "Hardware Trace ");
 	if (bfin_read_TBUFCTL() & 0x1)
-		printk("Active ");
+		printk(KERN_CONT "Active ");
 	else
-		printk("Off ");
+		printk(KERN_CONT "Off ");
 	if (bfin_read_TBUFCTL() & 0x2)
-		printk("and Enabled\n");
+		printk(KERN_CONT "and Enabled\n");
 	else
-	printk("and Disabled\n");
+		printk(KERN_CONT "and Disabled\n");
 
 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
 	/* we need to initialize the Flashrom device here since we might
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8eeb457ce5d..8a1caf2bb5b 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -212,7 +212,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	console_verbose();
 	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n");
+	printk(KERN_EMERG "Double Fault\n");
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
 		unsigned int cpu = smp_processor_id();
@@ -583,15 +583,14 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #ifndef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
 		if (trapnr == VEC_CPLB_I_M || trapnr == VEC_CPLB_M)
 			verbose_printk(KERN_NOTICE "No trace since you do not have "
-				"CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n"
-				KERN_NOTICE "\n");
+			       "CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE enabled\n\n");
 		else
 #endif
 			dump_bfin_trace_buffer();
 
 		if (oops_in_progress) {
 			/* Dump the current kernel stack */
-			verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			verbose_printk(KERN_NOTICE "Kernel Stack\n");
 			show_stack(current, NULL);
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
@@ -906,7 +905,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 
 			ret_addr = 0;
 			if (!j && i % 8 == 0)
-				printk("\n" KERN_NOTICE "%p:",addr);
+				printk(KERN_NOTICE "%p:",addr);
 
 			/* if it is an odd address, or zero, just skip it */
 			if (*addr & 0x1 || !*addr)
@@ -996,9 +995,9 @@ void dump_bfin_process(struct pt_regs *fp)
 
 		printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
 		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE  "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				KERN_NOTICE " BSS = 0x%p-0x%p  USER-STACK = 0x%p\n"
-				KERN_NOTICE "\n",
+			verbose_printk(KERN_NOTICE
+				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
+				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
 				(void *)current->mm->start_code,
 				(void *)current->mm->end_code,
 				(void *)current->mm->start_data,
@@ -1009,8 +1008,8 @@ void dump_bfin_process(struct pt_regs *fp)
 		else
 			verbose_printk(KERN_NOTICE "invalid mm\n");
 	} else
-		verbose_printk(KERN_NOTICE "\n" KERN_NOTICE
-		     "No Valid process in current context\n");
+		verbose_printk(KERN_NOTICE
+			       "No Valid process in current context\n");
 #endif
 }
 
@@ -1028,7 +1027,7 @@ void dump_bfin_mem(struct pt_regs *fp)
 	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
 	     addr++) {
 		if (!((unsigned long)addr & 0xF))
-			verbose_printk("\n" KERN_NOTICE "0x%p: ", addr);
+			verbose_printk(KERN_NOTICE "0x%p: ", addr);
 
 		if (!get_instruction(&val, addr)) {
 				val = 0;
@@ -1056,9 +1055,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 	    oops_in_progress)){
 		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE "The remaining message may be meaningless\n"
-			KERN_NOTICE "You should enable CONFIG_DEBUG_HWERR to get a"
-			 " better idea where it came from\n");
+		verbose_printk(KERN_NOTICE
+"The remaining message may be meaningless\n"
+"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
 #else
 		/* If we are handling only one peripheral interrupt
 		 * and current mm and pid are valid, and the last error
@@ -1114,9 +1113,10 @@ void show_regs(struct pt_regs *fp)
 
 	verbose_printk(KERN_NOTICE "%s", linux_banner);
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
+		       print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, fp->syscfg);
+		       (long)fp->seqstat, fp->ipend, fp->syscfg);
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
 			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
@@ -1184,7 +1184,7 @@ unlock:
 		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
 	}
 
-	verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "PROCESSOR STATE:\n");
+	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
 	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
 		fp->r0, fp->r1, fp->r2, fp->r3);
 	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 1e96c6eb631..8f8f4abab2f 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -290,7 +290,7 @@ void dump(struct pt_regs *fp)
 	unsigned char	*tp;
 	int		i;
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CURRENT PROCESS:\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\nCURRENT PROCESS:\n\n");
 	printk(KERN_EMERG "COMM=%s PID=%d\n", current->comm, current->pid);
 
 	if (current->mm) {
@@ -301,8 +301,7 @@ void dump(struct pt_regs *fp)
 			(int) current->mm->end_data,
 			(int) current->mm->end_data,
 			(int) current->mm->brk);
-		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n"
-			KERN_EMERG "\n",
+		printk(KERN_EMERG "USER-STACK=%08x KERNEL-STACK=%08x\n\n",
 			(int) current->mm->start_stack,
 			(int)(((unsigned long) current) + THREAD_SIZE));
 	}
@@ -313,35 +312,35 @@ void dump(struct pt_regs *fp)
 		fp->d0, fp->d1, fp->d2, fp->d3);
 	printk(KERN_EMERG "d4: %08lx    d5: %08lx    a0: %08lx    a1: %08lx\n",
 		fp->d4, fp->d5, fp->a0, fp->a1);
-	printk(KERN_EMERG "\n" KERN_EMERG "USP: %08x   TRAPFRAME: %08x\n",
+	printk(KERN_EMERG "\nUSP: %08x   TRAPFRAME: %08x\n",
 		(unsigned int) rdusp(), (unsigned int) fp);
 
-	printk(KERN_EMERG "\n" KERN_EMERG "CODE:");
+	printk(KERN_EMERG "\nCODE:");
 	tp = ((unsigned char *) fp->pc) - 0x20;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x40);  i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "KERNEL STACK:");
 	tp = ((unsigned char *) fp) - 0x40;
 	for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 
 	printk(KERN_EMERG "USER STACK:");
 	tp = (unsigned char *) (rdusp() - 0x10);
 	for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
 		if ((i % 0x10) == 0)
-			printk("\n" KERN_EMERG "%08x: ", (int) (tp + i));
+			printk(KERN_EMERG "%08x: ", (int) (tp + i));
 		printk("%08x ", (int) *sp++);
 	}
-	printk("\n" KERN_EMERG "\n");
+	printk(KERN_EMERG "\n");
 }
 
 /*
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index 51d325343ab..3739c8f657d 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -111,7 +111,7 @@ static void print_this_address(unsigned long addr, int i)
 	if (i % 5)
 		printk(KERN_CONT " [%08lx] ", addr);
 	else
-		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+		printk(KERN_EMERG " [%08lx] ", addr);
 	i++;
 #endif
 }
@@ -137,8 +137,8 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 		if (stack + 1 + i > endstack)
 			break;
 		if (i % 8 == 0)
-			printk("\n" KERN_EMERG "       ");
-		printk(" %08lx", *(stack + i));
+			printk(KERN_EMERG "       ");
+		printk(KERN_CONT " %08lx", *(stack + i));
 	}
 	printk("\n");
 	i = 0;
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 681ad8c9e4f..0dfdc500112 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -136,8 +136,7 @@ void show_trace(unsigned long *sp)
 	unsigned long *stack, addr, module_start, module_end;
 	int i;
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Call Trace:");
+	printk(KERN_EMERG "\nCall Trace:");
 
 	stack = sp;
 	i = 0;
@@ -153,7 +152,7 @@ void show_trace(unsigned long *sp)
 			printk("\n");
 #else
 			if ((i % 6) == 0)
-				printk("\n" KERN_EMERG "  ");
+				printk(KERN_EMERG "  ");
 			printk("[<%08lx>] ", addr);
 			i++;
 #endif
@@ -180,7 +179,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 		if (((long) stack & (THREAD_SIZE - 1)) == 0)
 			break;
 		if ((i % 8) == 0)
-			printk("\n" KERN_EMERG "  ");
+			printk(KERN_EMERG "  ");
 		printk("%08lx ", *stack++);
 	}
 
@@ -264,8 +263,7 @@ void show_registers(struct pt_regs *regs)
 		show_stack(current, (unsigned long *) sp);
 
 #if 0
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "Code: ");
+		printk(KERN_EMERG "\nCode: ");
 		if (regs->pc < PAGE_OFFSET)
 			goto bad;
 
@@ -311,16 +309,14 @@ void die(const char *str, struct pt_regs *regs, enum exception_code code)
 {
 	console_verbose();
 	spin_lock_irq(&die_lock);
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "%s: %04x\n",
+	printk(KERN_EMERG "\n%s: %04x\n",
 	       str, code & 0xffff);
 	show_registers(regs);
 
 	if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
 	    (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
 		printk(KERN_EMERG "Exception in usermode interrupt handler\n");
-		printk(KERN_EMERG "\n"
-		       KERN_EMERG "  Please connect to kernel debugger !!\n");
+		printk(KERN_EMERG "\nPlease connect to kernel debugger !!\n");
 		asm volatile ("0: bra 0b");
 	}
 
@@ -429,9 +425,8 @@ asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
 {
 	console_verbose();
 
-	printk(KERN_EMERG "\n"
-	       KERN_EMERG "Asynchronous I/O Bus Error\n"
-	       KERN_EMERG "==========================\n");
+	printk(KERN_EMERG "Asynchronous I/O Bus Error\n");
+	printk(KERN_EMERG "==========================\n");
 
 	if (bcberr & BCBERR_BEME)
 		printk(KERN_EMERG "- Multiple recorded errors\n");
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 61c07078c07..1f3aa8db020 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -156,7 +156,7 @@ void machine_power_off(void)
 	 * software. The user has to press the button himself. */
 
 	printk(KERN_EMERG "System shut down completed.\n"
-	       KERN_EMERG "Please power this system off now.");
+	       "Please power this system off now.");
 }
 
 void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index c32f5d6d778..528f0ff9b27 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -250,15 +250,14 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	oops_enter();
 
 	/* Amuse the user in a SPARC fashion */
-	if (err) printk(
-KERN_CRIT "      _______________________________ \n"
-KERN_CRIT "     < Your System ate a SPARC! Gah! >\n"
-KERN_CRIT "      ------------------------------- \n"
-KERN_CRIT "             \\   ^__^\n"
-KERN_CRIT "              \\  (xx)\\_______\n"
-KERN_CRIT "                 (__)\\       )\\/\\\n"
-KERN_CRIT "                  U  ||----w |\n"
-KERN_CRIT "                     ||     ||\n");
+	if (err) printk(KERN_CRIT
+			"      _______________________________ \n"
+			"     < Your System ate a SPARC! Gah! >\n"
+			"      ------------------------------- \n"
+			"             \\   ^__^\n"
+			"                 (__)\\       )\\/\\\n"
+			"                  U  ||----w |\n"
+			"                     ||     ||\n");
 	
 	/* unlock the pdc lock if necessary */
 	pdc_emergency_unlock();
@@ -797,7 +796,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 		else
 			printk(KERN_DEBUG "User Fault (long pointer) (fault %d) ",
 			       code);
-		printk("pid=%d command='%s'\n", task_pid_nr(current), current->comm);
+		printk(KERN_CONT "pid=%d command='%s'\n",
+		       task_pid_nr(current), current->comm);
 		show_regs(regs);
 #endif
 		si.si_signo = SIGSEGV;
diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c
index 56d43d0a396..0960de54495 100644
--- a/arch/um/kernel/sysrq.c
+++ b/arch/um/kernel/sysrq.c
@@ -70,8 +70,8 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 		if (kstack_end(stack))
 			break;
 		if (i && ((i % 8) == 0))
-			printk("\n" KERN_INFO "       ");
-		printk("%08lx ", *stack++);
+			printk(KERN_INFO "       ");
+		printk(KERN_CONT "%08lx ", *stack++);
 	}
 
 	show_trace(task, esp);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 8fd1efb5a0b..90b5e6efa93 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1739,7 +1739,6 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 	if (apic_verbosity == APIC_QUIET)
 		return;
 
-	printk(KERN_DEBUG "\n");
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index ae068f59603..2a50ef89100 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1259,7 +1259,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	static const char ACPI_PSS_BIOS_BUG_MSG[] =
 		KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
-		KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+		FW_BUG PFX "Try again with latest BIOS.\n";
 	struct powernow_k8_data *data;
 	struct init_on_cpu init_on_cpu;
 	int rc;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index af425b83202..484c1e5f658 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -194,14 +194,14 @@ static void print_mce(struct mce *m)
 		       m->cs, m->ip);
 		if (m->cs == __KERNEL_CS)
 			print_symbol("{%s}", m->ip);
-		printk("\n");
+		printk(KERN_CONT "\n");
 	}
 	printk(KERN_EMERG "TSC %llx ", m->tsc);
 	if (m->addr)
-		printk("ADDR %llx ", m->addr);
+		printk(KERN_CONT "ADDR %llx ", m->addr);
 	if (m->misc)
-		printk("MISC %llx ", m->misc);
-	printk("\n");
+		printk(KERN_CONT "MISC %llx ", m->misc);
+	printk(KERN_CONT "\n");
 	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
 			m->cpuvendor, m->cpuid, m->time, m->socketid,
 			m->apicid);
@@ -209,13 +209,13 @@ static void print_mce(struct mce *m)
 
 static void print_mce_head(void)
 {
-	printk(KERN_EMERG "\n" KERN_EMERG "HARDWARE ERROR\n");
+	printk(KERN_EMERG "\nHARDWARE ERROR\n");
 }
 
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-	       KERN_EMERG "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index c4ca89d9aaf..5cb5725b2ba 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -627,10 +627,9 @@ __init void e820_setup_gap(void)
 #ifdef CONFIG_X86_64
 	if (!found) {
 		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
-		printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit "
-		       "address range\n"
-		       KERN_ERR "PCI: Unassigned devices with 32bit resource "
-		       "registers may break!\n");
+		printk(KERN_ERR
+	"PCI: Warning: Cannot find a gap in the 32bit address range\n"
+	"PCI: Unassigned devices with 32bit resource registers may break!\n");
 	}
 #endif
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index cfd9f906389..d2e56b8f48e 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -675,7 +675,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
  nommu:
 	/* Should not happen anymore */
 	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
-	       KERN_WARNING "falling back to iommu=soft.\n");
+	       "falling back to iommu=soft.\n");
 	return -1;
 }
 
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff857b..85307cc6e45 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -426,10 +426,11 @@ static noinline int vmalloc_fault(unsigned long address)
 }
 
 static const char errata93_warning[] =
-KERN_ERR "******* Your BIOS seems to not contain a fix for K8 errata #93\n"
-KERN_ERR "******* Working around it, but it may cause SEGVs or burn power.\n"
-KERN_ERR "******* Please consider a BIOS update.\n"
-KERN_ERR "******* Disabling USB legacy in the BIOS may also help.\n";
+KERN_ERR 
+"******* Your BIOS seems to not contain a fix for K8 errata #93\n"
+"******* Working around it, but it may cause SEGVs or burn power.\n"
+"******* Please consider a BIOS update.\n"
+"******* Disabling USB legacy in the BIOS may also help.\n";
 
 /*
  * No vm86 mode in 64-bit mode:
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index ba9ab934978..e64efac3b9d 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -354,10 +354,10 @@ void show_regs(struct pt_regs * regs)
 
 	for (i = 0; i < 16; i++) {
 		if ((i % 8) == 0)
-			printk ("\n" KERN_INFO "a%02d: ", i);
-		printk("%08lx ", regs->areg[i]);
+			printk(KERN_INFO "a%02d:", i);
+		printk(KERN_CONT " %08lx", regs->areg[i]);
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n",
 	       regs->pc, regs->ps, regs->depc, regs->excvaddr);
-- 
cgit v1.2.3


From 44b572809581d5a10dbe35aa6bf689f32b9c5ad6 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 8 Jul 2009 09:50:19 -0700
Subject: x86: don't clear nodes_states[N_NORMAL_MEMORY] when numa is not
 compiled in

Alex found that specjbb2005 still can not run with hugepages on an
x86-64 machine.  This only happens when numa is not compiled in.

The root cause: node_set_state will not set it back for us in that case,
so don't clear that when numa is not select in config

[ v2: use node_clear_state instead ]
Reported-and-Tested-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/init_64.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index b177652251a..6176fe8f29e 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -598,8 +598,15 @@ void __init paging_init(void)
 
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
-	/* clear the default setting with node 0 */
-	nodes_clear(node_states[N_NORMAL_MEMORY]);
+
+	/*
+	 * clear the default setting with node 0
+	 * note: don't use nodes_clear here, that is really clearing when
+	 *	 numa support is not compiled in, and later node_set_state
+	 *	 will not set it back.
+	 */
+	node_clear_state(0, N_NORMAL_MEMORY);
+
 	free_area_init_nodes(max_zone_pfns);
 }
 
-- 
cgit v1.2.3


From 1dcdd0911b5553f0282ce8525773955b59a56919 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 9 Jul 2009 11:27:40 +0900
Subject: microblaze: include EXIT_TEXT to _stext

Microblaze wants to throw out EXIT_TEXT during runtime too.  This
hasn't caused trouble till now because the linker script didn't
discard EXIT_TEXT and it ended up in its default output section.  As
discard definition is about to be unified, include EXIT_TEXT into
_stext explicitly and while at it replace explicit exitcall definition
to EXIT_CALL.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/microblaze/kernel/vmlinux.lds.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index a207543c592..81bebdcb18f 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -23,8 +23,8 @@ SECTIONS {
 		_stext = . ;
 		*(.text .text.*)
 		*(.fixup)
-
-		*(.exitcall.exit)
+               EXIT_TEXT
+               EXIT_CALL
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
-- 
cgit v1.2.3


From 023bf6f1b8bf58dc4da7f0dc1cf4787b0d5297c1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 9 Jul 2009 11:27:40 +0900
Subject: linker script: unify usage of discard definition

Discarded sections in different archs share some commonality but have
considerable differences.  This led to linker script for each arch
implementing its own /DISCARD/ definition, which makes maintaining
tedious and adding new entries error-prone.

This patch makes all linker scripts to move discard definitions to the
end of the linker script and use the common DISCARDS macro.  As ld
uses the first matching section definition, archs can include default
discarded sections by including them earlier in the linker script.

ia64 is notable because it first throws away some ia64 specific
subsections and then include the rest of the sections into the final
image, so those sections must be discarded before the inclusion.

defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64,
alpha, sparc, sparc64 and s390.  Michal Simek tested microblaze.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: linux-arch@vger.kernel.org
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
---
 arch/alpha/kernel/vmlinux.lds.S      | 10 ++--------
 arch/avr32/kernel/vmlinux.lds.S      | 10 +++-------
 arch/blackfin/kernel/vmlinux.lds.S   |  6 +-----
 arch/cris/kernel/vmlinux.lds.S       | 10 ++--------
 arch/frv/kernel/vmlinux.lds.S        |  2 +-
 arch/h8300/kernel/vmlinux.lds.S      |  6 ++----
 arch/ia64/kernel/vmlinux.lds.S       | 17 ++++++++---------
 arch/m32r/kernel/vmlinux.lds.S       | 11 +++--------
 arch/m68k/kernel/vmlinux-std.lds     | 11 +++--------
 arch/m68k/kernel/vmlinux-sun3.lds    | 10 ++--------
 arch/m68knommu/kernel/vmlinux.lds.S  |  8 +-------
 arch/microblaze/kernel/vmlinux.lds.S |  2 +-
 arch/mips/kernel/vmlinux.lds.S       | 22 ++++++++++------------
 arch/mn10300/kernel/vmlinux.lds.S    |  9 +++------
 arch/parisc/kernel/vmlinux.lds.S     |  9 ++++-----
 arch/powerpc/kernel/vmlinux.lds.S    | 10 +++-------
 arch/s390/kernel/vmlinux.lds.S       | 10 +++-------
 arch/sh/kernel/vmlinux.lds.S         | 11 ++++-------
 arch/sparc/kernel/vmlinux.lds.S      |  9 ++-------
 arch/um/include/asm/common.lds.S     |  5 -----
 arch/um/kernel/dyn.lds.S             |  2 +-
 arch/um/kernel/uml.lds.S             |  2 +-
 arch/x86/kernel/vmlinux.lds.S        | 11 ++++-------
 arch/xtensa/kernel/vmlinux.lds.S     | 14 ++++----------
 24 files changed, 68 insertions(+), 149 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 75fe1d6877e..6dc03c35caa 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -134,14 +134,6 @@ SECTIONS
 	__bss_stop = .;
 	_end = .;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	.mdebug 0 : {
 		*(.mdebug)
 	}
@@ -151,4 +143,6 @@ SECTIONS
 
 	STABS_DEBUG
 	DWARF_DEBUG
+
+	DISCARDS
 }
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index b8324608ec0..c4b56654349 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -124,15 +124,11 @@ SECTIONS
 		_end = .;
 	}
 
+	DWARF_DEBUG
+
 	/* When something in the kernel is NOT compiled as a module, the module
 	 * cleanup code and data are put into these segments. Both can then be
 	 * thrown away, as cleanup code is never called unless it's a module.
 	 */
-	/DISCARD/       	: {
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
-	DWARF_DEBUG
+	DISCARDS
 }
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 6e8eabd8f0a..d7ffe299b97 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -277,9 +277,5 @@ SECTIONS
 
 	DWARF_DEBUG
 
-	/DISCARD/ :
-	{
-		*(.exitcall.exit)
-		*(.discard)
-	}
+	DISCARDS
 }
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index a3175ebb38c..6c81836b922 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -140,13 +140,7 @@ SECTIONS
 	_end = .;
 	__end = .;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-        }
-
 	dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024;
+
+	DISCARDS
 }
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index 64b5a5e4d35..7dbf41f68b5 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -178,7 +178,7 @@ SECTIONS
 
   .comment 0 : { *(.comment) }
 
-  /DISCARD/ : { *(.discard) }
+  DISCARDS
 }
 
 __kernel_image_size_no_bss = __bss_start - __kernel_image_start;
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 03d6c0df33d..662b02ecb86 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -152,10 +152,6 @@ SECTIONS
 	__end = . ;
 	__ramstart = .;
 	}
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
-	}
         .romfs :	
 	{
 		*(.romfs*)
@@ -166,4 +162,6 @@ SECTIONS
 	COMMAND_START = . - 0x200 ;
 	__ramend = . ;
 	}
+
+	DISCARDS
 }
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 13d95897587..eb4214d1c5a 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -24,15 +24,14 @@ PHDRS {
 }
 SECTIONS
 {
-  /* Sections to be discarded */
+  /* unwind exit sections must be discarded before the rest of the
+     sections get included. */
   /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
 	*(.IA_64.unwind.exit.text)
 	*(.IA_64.unwind_info.exit.text)
-	}
+	*(.comment)
+	*(.note)
+  }
 
   v = PAGE_OFFSET;	/* this symbol is here to make debugging easier... */
   phys_start = _start - LOAD_OFFSET;
@@ -317,7 +316,7 @@ SECTIONS
   .debug_funcnames 0 : { *(.debug_funcnames) }
   .debug_typenames 0 : { *(.debug_typenames) }
   .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-  /DISCARD/ : { *(.comment) }
-  /DISCARD/ : { *(.note) }
+
+  /* Default discards */
+  DISCARDS
 }
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 480a49944cf..de5e21cca6a 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -120,14 +120,6 @@ SECTIONS
 
   _end = . ;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
-	}
-
   /* Stabs debugging sections.  */
   .stab 0 : { *(.stab) }
   .stabstr 0 : { *(.stabstr) }
@@ -136,4 +128,7 @@ SECTIONS
   .stab.index 0 : { *(.stab.index) }
   .stab.indexstr 0 : { *(.stab.indexstr) }
   .comment 0 : { *(.comment) }
+
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 905a797ada9..47eac19e8f6 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -82,14 +82,6 @@ SECTIONS
 
   _end = . ;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
-	}
-
   /* Stabs debugging sections.  */
   .stab 0 : { *(.stab) }
   .stabstr 0 : { *(.stabstr) }
@@ -98,4 +90,7 @@ SECTIONS
   .stab.index 0 : { *(.stab.index) }
   .stab.indexstr 0 : { *(.stab.indexstr) }
   .comment 0 : { *(.comment) }
+
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 47d04be322a..03efaf04d7d 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -77,14 +77,6 @@ __init_begin = .;
 
   _end = . ;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
-	}
-
   .crap : {
 	/* Stabs debugging sections.  */
 	*(.stab)
@@ -97,4 +89,6 @@ __init_begin = .;
 	*(.note)
   }
 
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 68111a61a77..2736a5e309c 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -184,13 +184,6 @@ SECTIONS {
 		__init_end = .;
 	} > INIT
 
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	.bss : {
 		. = ALIGN(4);
 		_sbss = . ;
@@ -201,5 +194,6 @@ SECTIONS {
 	 	_end = . ;
 	} > BSS
 
+	DISCARDS
 }
 
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 81bebdcb18f..ec5fa91a48d 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -163,5 +163,5 @@ SECTIONS {
 	. = ALIGN(4096);
 	_end = .;
 
-	/DISCARD/ : { *(.discard) }
+	DISCARDS
 }
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 45901609b74..1474c18fb77 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -176,18 +176,6 @@ SECTIONS
 
 	_end = . ;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
-
-		/* ABI crap starts here */
-		*(.MIPS.options)
-		*(.options)
-		*(.pdr)
-		*(.reginfo)
-	}
-
 	/* These mark the ABI of the kernel for debuggers.  */
 	.mdebug.abi32 : {
 		KEEP(*(.mdebug.abi32))
@@ -213,4 +201,14 @@ SECTIONS
 		*(.gptab.bss)
 		*(.gptab.sbss)
 	}
+
+	/* Sections to be discarded */
+	DISCARDS
+	/DISCARD/ : {
+		/* ABI crap starts here */
+		*(.MIPS.options)
+		*(.options)
+		*(.pdr)
+		*(.reginfo)
+	}
 }
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 5609d4962a5..8fcd0f1e21d 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -115,13 +115,10 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   pg0 = .;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_CALL
-	*(.discard)
-	}
-
   STABS_DEBUG
 
   DWARF_DEBUG
+
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index ccf58341845..aea1784edbd 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -237,10 +237,12 @@ SECTIONS
 	/* freed after init ends here */
 	_end = . ;
 
+	STABS_DEBUG
+	.note 0 : { *(.note) }
+
 	/* Sections to be discarded */
+	DISCARDS
 	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
 #ifdef CONFIG_64BIT
 		/* temporary hack until binutils is fixed to not emit these
 	 	 * for static binaries
@@ -253,7 +255,4 @@ SECTIONS
 		*(.gnu.hash)
 #endif
 	}
-
-	STABS_DEBUG
-	.note 0 : { *(.note) }	
 }
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 7fca9355fd3..244e3658983 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -37,13 +37,6 @@ jiffies = jiffies_64 + 4;
 #endif
 SECTIONS
 {
-	/* Sections to be discarded. */
-	/DISCARD/ : {
-	*(.exitcall.exit)
-	*(.discard)
-	EXIT_DATA
-	}
-
 	. = KERNELBASE;
 
 /*
@@ -299,4 +292,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
 	PROVIDE32 (end = .);
+
+	/* Sections to be discarded. */
+	DISCARDS
 }
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 98867dfea46..82415c75b99 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -157,14 +157,10 @@ SECTIONS
 
 	_end = . ;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	/* Debugging sections.	*/
 	STABS_DEBUG
 	DWARF_DEBUG
+
+	/* Sections to be discarded */
+	DISCARDS
 }
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 766976d27b2..0ce254bca92 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -163,17 +163,14 @@ SECTIONS
 		_end = . ;
 	}
 
+	STABS_DEBUG
+	DWARF_DEBUG
+
 	/*
 	 * When something in the kernel is NOT compiled as a module, the
 	 * module cleanup code and data are put into these segments. Both
 	 * can then be thrown away, as cleanup code is never called unless
 	 * it's a module.
 	 */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
-	STABS_DEBUG
-	DWARF_DEBUG
+	DISCARDS
 }
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index d63cf914667..866390feb68 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -171,13 +171,8 @@ SECTIONS
 	}
 	_end = . ;
 
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	STABS_DEBUG
 	DWARF_DEBUG
+
+	DISCARDS
 }
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index cb0248616d4..37ecc5577a9 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -123,8 +123,3 @@
 	__initramfs_end = .;
   }
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
- 	*(.exitcall.exit)
-  }
-
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 2916d6eadff..715a188c047 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -157,5 +157,5 @@ SECTIONS
 
   DWARF_DEBUG
 
-  /DISCARD/	: { *(.discard) }
+  DISCARDS
 }
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 1f8a622cabe..2ebd39765db 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -101,5 +101,5 @@ SECTIONS
 
   DWARF_DEBUG
 
-  /DISCARD/	: { *(.discard) }
+  DISCARDS
 }
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 367e8788204..b600c843710 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -387,15 +387,12 @@ SECTIONS
 		_end = .;
 	}
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.eh_frame)
-		*(.discard)
-	}
-
         STABS_DEBUG
         DWARF_DEBUG
+
+	/* Sections to be discarded */
+	DISCARDS
+	/DISCARD/ : { *(.eh_frame) }
 }
 
 
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index b1e24638acd..921b6ff3b64 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -280,16 +280,6 @@ SECTIONS
     *(.ResetVector.text)
   }
 
-  /* Sections to be discarded */
-  /DISCARD/ :
-  {
-	*(.exit.literal)
-	EXIT_TEXT
-	EXIT_DATA
-        *(.exitcall.exit)
-	*(.discard)
-  }
-
   .xt.lit : { *(.xt.lit) }
   .xt.prop : { *(.xt.prop) }
 
@@ -322,4 +312,8 @@ SECTIONS
     *(.xt.lit)
     *(.gnu.linkonce.p*)
   }
+
+  /* Sections to be discarded */
+  DISCARDS
+  /DISCARD/ : { *(.exit.literal) }
 }
-- 
cgit v1.2.3


From 7fb2bbf4d9e7e62057184f1e061566459eef6c79 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:15:12 +0100
Subject: MMC: MMCI: allow GPIOs to be passed

Add and initialize the gpio_wp and gpio_cd members.  We need to
ensure that all users are covered, because GPIO 0 may be valid.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
---
 arch/arm/include/asm/mach/mmc.h          | 2 ++
 arch/arm/mach-integrator/integrator_cp.c | 2 ++
 arch/arm/mach-realview/core.c            | 4 ++++
 arch/arm/mach-u300/mmc.c                 | 2 ++
 arch/arm/mach-versatile/core.c           | 2 ++
 arch/arm/mach-versatile/versatile_pb.c   | 2 ++
 6 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index 4da332b0314..b490ecc79de 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -10,6 +10,8 @@ struct mmc_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
+	int	gpio_wp;
+	int	gpio_cd;
 };
 
 #endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..69956cdae3c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -403,6 +403,8 @@ static unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct amba_device mmc_device = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05093c..17a07e6acfa 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -238,11 +238,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9..585cc013639 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -156,6 +156,8 @@ int __devinit mmc_init(struct amba_device *adev)
 	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
 	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
+	mmci_card->mmc0_plat_data.gpio_wp = -1;
+	mmci_card->mmc0_plat_data.gpio_cd = -1;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 92273c95edf..afc0f87f3fa 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -373,6 +373,8 @@ unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 7419451fdf0..9af8d8154df 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -44,6 +44,8 @@
 static struct mmc_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct pl061_platform_data gpio2_plat_data = {
-- 
cgit v1.2.3


From 02239f0a4264608686cc0015d906c7b2dead89df Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 8 Jul 2009 02:00:49 +0100
Subject: [ARM] 5577/2: ep93xx: syscon locked register functions

Add core functions to handle writes to the ep93xx software locked
registers.

There are a number of registers in the EP93xx System Controller
that require a write to the software lock register before they
can be updated. This patch adds a number of exported functions
to the ep93xx core that handle this access.

The software locked clock divider registers, VidClkDiv, MIRClkDiv,
I2SClkDiv and KeyTchClkDiv would typically involve writing a
specific value to the register. To support this the
ep93xx_syscon_swlocked_write() function is provided.

For the DeviceCfg register it's more typical to only need to
set or clear a single bit. A generic ep93xx_devcfg_set_clear()
function is provided to handle both operations. Two inline
functions, ep93xx_devcfg_set_bits() and ep93xx_devcfg_clear_bits()
are also provided to improve code readability.

In addition, the remaining bits in the System Controller Device
Config Register have been documented and the previously defined
names shortened.

All code paths that use this functionality have been updated
except for arch/arm/kernel/crunch.c. That code is in a context
switch path, which is not reentrant, so it is safe against itself.

Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/crunch.c                        | 13 +++++--
 arch/arm/mach-ep93xx/clock.c                    | 24 +++++++-----
 arch/arm/mach-ep93xx/core.c                     | 52 ++++++++++++++++++++-----
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 36 ++++++++++++++---
 arch/arm/mach-ep93xx/include/mach/platform.h    | 16 ++++++++
 arch/arm/mach-ep93xx/include/mach/system.h      | 12 +++---
 6 files changed, 118 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2b231..769abe15cf9 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread)
 
 static int crunch_enabled(u32 devcfg)
 {
-	return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+	return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
 }
 
 static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
 		break;
 
 	case THREAD_NOTIFY_SWITCH:
-		devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+		devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
 		if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
-			devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+			/*
+			 * We don't use ep93xx_syscon_swlocked_write() here
+			 * because we are on the context switch path and
+			 * preemption is already disabled.
+			 */
+			devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
 			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-			__raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+			__raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
 		}
 		break;
 	}
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c1633ed1..c7642acfd02 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -50,20 +50,20 @@ static unsigned long get_uart_rate(struct clk *clk);
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
@@ -160,9 +160,11 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value |= clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value | clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 
 	return 0;
@@ -175,9 +177,11 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value &= ~clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5cbd0b..9399d3af990 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -384,6 +384,47 @@ void __init ep93xx_init_irq(void)
 }
 
 
+/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, reg);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+	val |= set_bits;
+	val &= ~clear_bits;
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
@@ -550,15 +591,8 @@ extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
 {
-	unsigned int v;
-
-	/*
-	 * Disallow access to MaverickCrunch initially.
-	 */
-	v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+	/* Disallow access to MaverickCrunch initially */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
 	ep93xx_gpio_init();
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 49b256b3ddf..087d22b8f35 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -175,11 +175,37 @@
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
+#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f2f3c..fb5e59a3ea0 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -15,8 +15,24 @@ struct ep93xx_eth_data
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(0x00, bits);
+}
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e4f06..6d661fe9d66 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	u32 devicecfg;
-
 	local_irq_disable();
 
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
 
 	while (1)
 		;
-- 
cgit v1.2.3


From 701fac823e24676ea42451c6597f96d81d9b6aba Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 30 Jun 2009 23:06:43 +0100
Subject: [ARM] 5578/1: ep93xx: add ep93xx-keypad clock

Add clkdev support for the ep93xx_keypad driver.

A matrix keypad driver for the ep93xx just got merged via the
input subsystem group.  For this driver to work the keypad clock
needs to be added to the ep93xx clkdev support.  In order to
accomplish this the following changes are implemented:

  1) Move the EP93XX_EXT_*_RATE defines to mach/include/hardware.h.
  2) Add EP93XX_KEYTCHCLK_DIV{4/16} for the keypad driver.
  3) Add support for programmable clocks (set_rate() callback).
  4) Add clk_keypad for the keypad driver.
  5) tab indent the clk_lookup table for easier reading.
  6) Add the set_rate() callback to program the keypad clock.
     This callback is generalized since the ADC clock (touchscreen)
     can use the same callback.
  7) Use the ep93xx_syscon_swlocked_write() core function for updating
     the software locked register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                 | 101 ++++++++++++++++++---------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  14 ++++
 2 files changed, 82 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c7642acfd02..207e2769941 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,18 +22,6 @@
 #include <mach/hardware.h>
 
 
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-
 struct clk {
 	unsigned long	rate;
 	int		users;
@@ -42,11 +30,14 @@ struct clk {
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
+	int		(*set_rate)(struct clk *clk, unsigned long rate);
 };
 
 
 static unsigned long get_uart_rate(struct clk *clk);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -75,6 +66,12 @@ static struct clk clk_usb_host = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
+static struct clk clk_keypad = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+	.set_rate	= set_keytchclk_rate,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -130,27 +127,28 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart1),
-	INIT_CK("apb:uart2", NULL, &clk_uart2),
-	INIT_CK("apb:uart3", NULL, &clk_uart3),
-	INIT_CK(NULL, "pll1", &clk_pll1),
-	INIT_CK(NULL, "fclk", &clk_f),
-	INIT_CK(NULL, "hclk", &clk_h),
-	INIT_CK(NULL, "pclk", &clk_p),
-	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
-	INIT_CK(NULL, "m2p0", &clk_m2p0),
-	INIT_CK(NULL, "m2p1", &clk_m2p1),
-	INIT_CK(NULL, "m2p2", &clk_m2p2),
-	INIT_CK(NULL, "m2p3", &clk_m2p3),
-	INIT_CK(NULL, "m2p4", &clk_m2p4),
-	INIT_CK(NULL, "m2p5", &clk_m2p5),
-	INIT_CK(NULL, "m2p6", &clk_m2p6),
-	INIT_CK(NULL, "m2p7", &clk_m2p7),
-	INIT_CK(NULL, "m2p8", &clk_m2p8),
-	INIT_CK(NULL, "m2p9", &clk_m2p9),
-	INIT_CK(NULL, "m2m0", &clk_m2m0),
-	INIT_CK(NULL, "m2m1", &clk_m2m1),
+	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
+	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
+	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
+	INIT_CK(NULL,			"pll1",		&clk_pll1),
+	INIT_CK(NULL,			"fclk",		&clk_f),
+	INIT_CK(NULL,			"hclk",		&clk_h),
+	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"pll2",		&clk_pll2),
+	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
+	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
+	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
+	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
+	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
+	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
+	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
+	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
+	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
+	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
+	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
+	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
 
@@ -206,6 +204,43 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+	u32 div_bit;
+
+	val = __raw_readl(clk->enable_reg);
+
+	/*
+	 * The Key Matrix and ADC clocks are configured using the same
+	 * System Controller register.  The clock used will be either
+	 * 1/4 or 1/16 the external clock rate depending on the
+	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+	 * bit being set or cleared.
+	 */
+	div_bit = clk->enable_mask >> 15;
+
+	if (rate == EP93XX_KEYTCHCLK_DIV4)
+		val |= div_bit;
+	else if (rate == EP93XX_KEYTCHCLK_DIV16)
+		val &= ~div_bit;
+	else
+		return -EINVAL;
+
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->set_rate)
+		return clk->set_rate(clk, rate);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b..587c07bdec5 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -12,4 +12,18 @@
 
 #include "ts72xx.h"
 
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
+
 #endif
-- 
cgit v1.2.3


From a0b98ec87d7a293a7d9ab8e45935c53a68f3094a Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 22:17:54 +0100
Subject: [ARM] 5595/1: ep93xx: missing header in dma-m2p.c

<linux/io.h> was getting included by <mach/ts72xx.h>, is should be
included by this file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/dma-m2p.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index a2df5bb7dff..dbcac9c40a2 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
-- 
cgit v1.2.3


From 583ddafe1787528d08b0026bb3273490a499b730 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:39:50 +0100
Subject: [ARM] 5592/1: ep93xx: cleanup platform header includes

arch/arm/mach-ep93xx/include/mach/hardware.h
  1. Properly name the include files so that they are loaded
     from the <mach/*> directory and not the local directory.
  2. Remove including the ts72xx.h header.  This header is not
     generic to the ep93xx platform.  It should only be included
     by the ts72xx specific files that require it.  The only
     two users in the tree are arch/arm/mach-ep93xx/ts72xx.c
     and drivers/mtd/nand/ts7250.c.

arch/arm/mach-ep93xx/include/mach/ts72xx.h
  1. <linux/io.h> should already be included by any user of this
     header.  Doing the include here hides it from being needed
     by the calling source file.

arch/arm/mach-ep93xx/core.c
  1. Remove unnecessary headers.  They were probably included
     originally due to cut-and-paste from other files.
  2. <linux/io.h> should be included not <mach/gpio.h>

arch/arm/mach-ep93xx/adsphere.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gesbc9312.c
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.

arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.
  2. Add platform specific header <mach/ts72xx.h>.

drivers/mtd/nand/ts7250.c
  1. <linux/io.h> should be included not <asm/io.h>.
  2. Add platform specific header <mach/ts72xx.h>.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/adssphere.c             | 11 ++++-------
 arch/arm/mach-ep93xx/core.c                  | 23 +++--------------------
 arch/arm/mach-ep93xx/edb93xx.c               | 10 ++++------
 arch/arm/mach-ep93xx/gesbc9312.c             | 11 ++++-------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  7 ++-----
 arch/arm/mach-ep93xx/include/mach/ts72xx.h   |  1 -
 arch/arm/mach-ep93xx/micro9.c                | 11 +++--------
 arch/arm/mach-ep93xx/ts72xx.c                | 15 +++++++--------
 8 files changed, 27 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0fbe2..caf6d5154ae 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data adssphere_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9399d3af990..ce10f5b5dfb 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,23 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
 #include <linux/dma-mapping.h>
-#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b92457..73145ae5d3f 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data edb93xx_flash_data;
 
 static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500b71b..3da7ca816d1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data gesbc9312_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 587c07bdec5..349fa7cb72d 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,14 +4,11 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 
 #define pcibios_assign_all_busses()	0
 
-#include "platform.h"
-
-#include "ts72xx.h"
-
 /*
  * The EP93xx has two external crystal oscillators.  To generate the
  * required high-frequency clocks, the processor uses two phase-locked-
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c4..2737666e800 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,6 @@
 
 
 #ifndef __ASSEMBLY__
-#include <linux/io.h>
 
 static inline int board_is_ts7200(void)
 {
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815d78c..0a313e82fb7 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
 
 static struct ep93xx_eth_data micro9_eth_data = {
 	.phy_id		= 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d3482..5255dddd306 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/m48t86.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{
-- 
cgit v1.2.3


From c3e3baddbc0b6636b01cb2aa3e44505ad61be17b Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:40:53 +0100
Subject: [ARM] 5593/1: ep93xx: clock.c __iomem pointer

To ensure typesafe io, the enable_reg variable should be a
void __iomem pointer not u32.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 207e2769941..b6b53447b1b 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -26,7 +26,7 @@ struct clk {
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
-	u32		enable_reg;
+	void __iomem	*enable_reg;
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
-- 
cgit v1.2.3


From 6860107a46c8762d35eb7bf71bcf6c6510793b76 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 6 Jul 2009 18:04:28 +0100
Subject: [ARM] 5594/1: Correct U300 VIC init PM setting

This makes the VIC resume from suspend flagged IRQ:s identical to
the flags indicating all possible interrupts. This is perhaps not
the optimal setting but setting it to 0 makes the system suspend
and never come back again (all IRQ sources masked off).

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 89b3ccf35e1..7936085dd75 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -455,8 +455,8 @@ void __init u300_init_irq(void)
 	for (i = 0; i < NR_IRQS; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
 	u300_enable_intcon_clock();
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }
 
 
-- 
cgit v1.2.3


From 19c0a7286f3f0093bbbbcdce0af4c3205421b608 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Sat, 4 Jul 2009 12:26:33 +0100
Subject: [ARM] 5591/1: Add group irq enable/disable for w90p910 platform.

Add group irq enable/disable for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/irq.c | 154 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 146 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc194729..a296c9b81d2 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -29,9 +28,114 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
+struct group_irq {
+	unsigned long		gpen;
+	unsigned int		enabled;
+	void			(*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
+struct group_irq group_##_name = {				\
+		.enable		= w90x900_group_enable,		\
+		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+	}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (group_irq->enabled++ == 0)
+		(group_irq->enable)(group_irq, 1);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+
+	return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	WARN_ON(group_irq->enabled == 0);
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (--group_irq->enabled == 0)
+		(group_irq->enable)(group_irq, 0);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+{
+	unsigned int groupen = gpirq->gpen;
+	unsigned long regval;
+
+	regval = __raw_readl(REG_AIC_GEN);
+
+	if (enable)
+		regval |= groupen;
+	else
+		regval &= ~groupen;
+
+	__raw_writel(regval, REG_AIC_GEN);
+}
+
 static void w90x900_irq_mask(unsigned int irq)
 {
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
+
 	__raw_writel(1 << irq, REG_AIC_MDCR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_disable(group_irq);
 }
 
 /*
@@ -46,14 +150,48 @@ static void w90x900_irq_ack(unsigned int irq)
 
 static void w90x900_irq_unmask(unsigned int irq)
 {
-	unsigned long mask;
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
 
-	if (irq == IRQ_T_INT_GROUP) {
-		mask = __raw_readl(REG_AIC_GEN);
-		__raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
-		__raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
-	}
 	__raw_writel(1 << irq, REG_AIC_MECR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_enable(group_irq);
 }
 
 static struct irq_chip w90x900_irq_chip = {
-- 
cgit v1.2.3


From d7dbf6ea40a2859adaca2dfdbbea83f3d6c73c2f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Wed, 8 Jul 2009 21:12:20 +0100
Subject: [ARM] 5596/1: at91sam9g20-ek: Register WM8731 in board file

The WM8731 driver has been updated to allow registration via normal
device model methods rather than from within the ASoC driver probe
so update the AT91SAM9G20-EK to make use of this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9g20ek.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..4c259870088 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -221,6 +221,7 @@ static struct gpio_led ek_leds[] = {
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
+		I2C_BOARD_INFO("wm8731", 0x1b),
 	},
 };
 
-- 
cgit v1.2.3


From 13892cf95d2edf0d3c4285cc2d0113efa73be723 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 20:56:14 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026eff2aa..30af4329469 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Thu Jul 9 20:56:13 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1769,7 +1769,7 @@ mx31cicada		MACH_MX31CICADA		MX31CICADA		1777
 mi424wr			MACH_MI424WR		MI424WR			1778
 axs_ultrax		MACH_AXS_ULTRAX		AXS_ULTRAX		1779
 at572d940deb		MACH_AT572D940DEB	AT572D940DEB		1780
-davinci_da8xx_evm	MACH_DAVINCI_DA8XX_EVM	DAVINCI_DA8XX_EVM	1781
+davinci_da830_evm	MACH_DAVINCI_DA830_EVM	DAVINCI_DA830_EVM	1781
 ep9302			MACH_EP9302		EP9302			1782
 at572d940hfek		MACH_AT572D940HFEB	AT572D940HFEB		1783
 cybook3			MACH_CYBOOK3		CYBOOK3			1784
@@ -2280,3 +2280,36 @@ htcrhodium		MACH_HTCRHODIUM		HTCRHODIUM		2292
 htctopaz		MACH_HTCTOPAZ		HTCTOPAZ		2293
 matrix504		MACH_MATRIX504		MATRIX504		2294
 mrfsa			MACH_MRFSA		MRFSA			2295
+sc_p270			MACH_SC_P270		SC_P270			2296
+atlas5_evb		MACH_ATLAS5_EVB		ATLAS5_EVB		2297
+pelco_lobox		MACH_PELCO_LOBOX	PELCO_LOBOX		2298
+dilax_pcu200		MACH_DILAX_PCU200	DILAX_PCU200		2299
+leonardo		MACH_LEONARDO		LEONARDO		2300
+zoran_approach7		MACH_ZORAN_APPROACH7	ZORAN_APPROACH7		2301
+dp6xx			MACH_DP6XX		DP6XX			2302
+bcm2153_vesper		MACH_BCM2153_VESPER	BCM2153_VESPER		2303
+mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
+clickc			MACH_CLICKC		CLICKC			2305
+zb_gateway		MACH_ZB_GATEWAY		ZB_GATEWAY		2306
+tazcard			MACH_TAZCARD		TAZCARD			2307
+tazdev			MACH_TAZDEV		TAZDEV			2308
+annax_cb_arm		MACH_ANNAX_CB_ARM	ANNAX_CB_ARM		2309
+annax_dm3		MACH_ANNAX_DM3		ANNAX_DM3		2310
+cerebric		MACH_CEREBRIC		CEREBRIC		2311
+orca			MACH_ORCA		ORCA			2312
+pc9260			MACH_PC9260		PC9260			2313
+ems285a			MACH_EMS285A		EMS285A			2314
+gec2410			MACH_GEC2410		GEC2410			2315
+gec2440			MACH_GEC2440		GEC2440			2316
+mw903			MACH_ARCH_MW903		ARCH_MW903		2317
+mw2440			MACH_MW2440		MW2440			2318
+ecac2378		MACH_ECAC2378		ECAC2378		2319
+tazkiosk		MACH_TAZKIOSK		TAZKIOSK		2320
+whiterabbit_mch		MACH_WHITERABBIT_MCH	WHITERABBIT_MCH		2321
+sbox9263		MACH_SBOX9263		SBOX9263		2322
+oreo			MACH_OREO		OREO			2323
+smdk6442		MACH_SMDK6442		SMDK6442		2324
+openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
+incredible		MACH_INCREDIBLE		INCREDIBLE		2326
+incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
+heroct			MACH_HEROCT		HEROCT			2328
-- 
cgit v1.2.3


From ad46276952f1af34cd91d46d49ba13d347d56367 Mon Sep 17 00:00:00 2001
From: Jiri Olsa <jolsa@redhat.com>
Date: Wed, 8 Jul 2009 12:10:31 +0000
Subject: memory barrier: adding smp_mb__after_lock

Adding smp_mb__after_lock define to be used as a smp_mb call after
a lock.

Making it nop for x86, since {read|write|spin}_lock() on x86 are
full memory barriers.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/x86/include/asm/spinlock.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index b7e5db87639..4e77853321d 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -302,4 +302,8 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
+/* The {read|write|spin}_lock() on x86 are full memory barriers. */
+static inline void smp_mb__after_lock(void) { }
+#define ARCH_HAS_SMP_MB_AFTER_LOCK
+
 #endif /* _ASM_X86_SPINLOCK_H */
-- 
cgit v1.2.3


From c31d96338a6041520ba5f1b6a4a5012ef00686b3 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:37 +0200
Subject: x86: mce: Make CONFIG_X86_ANCIENT_MCE dependent on CONFIG_X86_MCE

Add a missing depency for ANCIENT_MCE. It didn't matter
in practice because the ANCIENT code wasn't compiled without
X86_MCE, but it's better to express that clearly in
Kconfig.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 356d2ec8e2f..5962b872a7a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -823,7 +823,7 @@ config X86_MCE_AMD
 
 config X86_ANCIENT_MCE
 	def_bool n
-	depends on X86_32
+	depends on X86_32 && X86_MCE
 	prompt "Support for old Pentium 5 / WinChip machine checks"
 	---help---
 	  Include support for machine check handling on old Pentium 5 or WinChip
-- 
cgit v1.2.3


From bab9bc6583fe6c1660d6ed36dd14bbb4edfaf393 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:38 +0200
Subject: x86: mce: Update X86_MCE description in x86/Kconfig

- Clarify that this config controls thermal throttling
reporting too
- Clarify the types of errors reported by machine checks
- Drop references to ancient CPUs.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5962b872a7a..134a8c0d80d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -774,20 +774,12 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	  increased on these systems.
 
 config X86_MCE
-	bool "Machine Check Exception"
+	bool "Machine Check / overheating reporting"
 	---help---
-	  Machine Check Exception support allows the processor to notify the
-	  kernel if it detects a problem (e.g. overheating, component failure).
+	  Machine Check support allows the processor to notify the
+	  kernel if it detects a problem (e.g. overheating, data corruption).
 	  The action the kernel takes depends on the severity of the problem,
-	  ranging from a warning message on the console, to halting the machine.
-	  Your processor must be a Pentium or newer to support this - check the
-	  flags in /proc/cpuinfo for mce.  Note that some older Pentium systems
-	  have a design flaw which leads to false MCE events - hence MCE is
-	  disabled on all P5 processors, unless explicitly enabled with "mce"
-	  as a boot argument.  Similarly, if MCE is built in and creates a
-	  problem on some new non-standard machine, you can boot with "nomce"
-	  to disable it.  MCE support simply ignores non-MCE processors like
-	  the 386 and 486, so nearly everyone can say Y here.
+	  ranging from warning messages to halting the machine.
 
 config X86_OLD_MCE
 	depends on X86_32 && X86_MCE
-- 
cgit v1.2.3


From 5bb38adcb54cf7192b154368ad62982caa11ca0b Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:39 +0200
Subject: x86: mce: Remove old i386 machine check code

As announced in feature-remove-schedule.txt remove CONFIG_X86_OLD_MCE

This patch only removes code.

The ancient machine check code for very old systems that are not supported
by CONFIG_X86_NEW_MCE is still kept.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig                       |  35 +------
 arch/x86/include/asm/mce.h             |  11 ---
 arch/x86/kernel/cpu/mcheck/Makefile    |   2 -
 arch/x86/kernel/cpu/mcheck/k7.c        | 116 -----------------------
 arch/x86/kernel/cpu/mcheck/mce.c       |  47 ----------
 arch/x86/kernel/cpu/mcheck/non-fatal.c |  94 -------------------
 arch/x86/kernel/cpu/mcheck/p4.c        | 163 ---------------------------------
 arch/x86/kernel/cpu/mcheck/p6.c        | 127 -------------------------
 8 files changed, 2 insertions(+), 593 deletions(-)
 delete mode 100644 arch/x86/kernel/cpu/mcheck/k7.c
 delete mode 100644 arch/x86/kernel/cpu/mcheck/non-fatal.c
 delete mode 100644 arch/x86/kernel/cpu/mcheck/p4.c
 delete mode 100644 arch/x86/kernel/cpu/mcheck/p6.c

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 134a8c0d80d..d986769a7d9 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -781,21 +781,10 @@ config X86_MCE
 	  The action the kernel takes depends on the severity of the problem,
 	  ranging from warning messages to halting the machine.
 
-config X86_OLD_MCE
-	depends on X86_32 && X86_MCE
-	bool "Use legacy machine check code (will go away)"
-	default n
-	select X86_ANCIENT_MCE
-	---help---
-	  Use the old i386 machine check code. This is merely intended for
-	  testing in a transition period. Try this if you run into any machine
-	  check related software problems, but report the problem to
-	  linux-kernel.  When in doubt say no.
-
 config X86_NEW_MCE
 	depends on X86_MCE
 	bool
-	default y if (!X86_OLD_MCE && X86_32) || X86_64
+	default y
 
 config X86_MCE_INTEL
 	def_bool y
@@ -835,29 +824,9 @@ config X86_MCE_INJECT
 	  If you don't know what a machine check is and you don't do kernel
 	  QA it is safe to say n.
 
-config X86_MCE_NONFATAL
-	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_OLD_MCE
-	---help---
-	  Enabling this feature starts a timer that triggers every 5 seconds which
-	  will look at the machine check registers to see if anything happened.
-	  Non-fatal problems automatically get corrected (but still logged).
-	  Disable this if you don't want to see these messages.
-	  Seeing the messages this option prints out may be indicative of dying
-	  or out-of-spec (ie, overclocked) hardware.
-	  This option only does something on certain CPUs.
-	  (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
-	bool "check for P4 thermal throttling interrupt."
-	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
-	---help---
-	  Enabling this feature will cause a message to be printed when the P4
-	  enters thermal throttling.
-
 config X86_THERMAL_VECTOR
 	def_bool y
-	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+	depends on X86_MCE_INTEL
 
 config VM86
 	bool "Enable VM86 support" if EMBEDDED
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index b50b9e9042c..6b8a974e127 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -115,13 +115,6 @@ void mcheck_init(struct cpuinfo_x86 *c);
 static inline void mcheck_init(struct cpuinfo_x86 *c) {}
 #endif
 
-#ifdef CONFIG_X86_OLD_MCE
-extern int nr_mce_banks;
-void amd_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
-#endif
-
 #ifdef CONFIG_X86_ANCIENT_MCE
 void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
 void winchip_mcheck_init(struct cpuinfo_x86 *c);
@@ -208,11 +201,7 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 void intel_init_thermal(struct cpuinfo_x86 *c);
 
-#ifdef CONFIG_X86_NEW_MCE
 void mce_log_therm_throt_event(__u64 status);
-#else
-static inline void mce_log_therm_throt_event(__u64 status) {}
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index 188a1ca5ad2..022a036ce21 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,11 +1,9 @@
 obj-y				=  mce.o
 
 obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
-obj-$(CONFIG_X86_OLD_MCE)	+= k7.o p4.o p6.o
 obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
 obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
 obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd.o
-obj-$(CONFIG_X86_MCE_NONFATAL)	+= non-fatal.o
 obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
 obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
 
diff --git a/arch/x86/kernel/cpu/mcheck/k7.c b/arch/x86/kernel/cpu/mcheck/k7.c
deleted file mode 100644
index b945d5dbc60..00000000000
--- a/arch/x86/kernel/cpu/mcheck/k7.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Athlon specific Machine Check Exception Reporting
- * (C) Copyright 2002 Dave Jones <davej@redhat.com>
- */
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-/* Machine Check Handler For AMD Athlon/Duron: */
-static void k7_machine_check(struct pt_regs *regs, long error_code)
-{
-	u32 alow, ahigh, high, low;
-	u32 mcgstl, mcgsth;
-	int recover = 1;
-	int i;
-
-	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover = 0;
-
-	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
-		smp_processor_id(), mcgsth, mcgstl);
-
-	for (i = 1; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high & (1<<31)) {
-			char misc[20];
-			char addr[24];
-
-			misc[0] = '\0';
-			addr[0] = '\0';
-
-			if (high & (1<<29))
-				recover |= 1;
-			if (high & (1<<25))
-				recover |= 2;
-			high &= ~(1<<31);
-
-			if (high & (1<<27)) {
-				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
-			}
-			if (high & (1<<26)) {
-				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
-			}
-
-			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
-				smp_processor_id(), i, high, low, misc, addr);
-
-			/* Clear it: */
-			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-			/* Serialize: */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-	}
-
-	if (recover & 2)
-		panic("CPU context corrupt");
-	if (recover & 1)
-		panic("Unable to continue");
-
-	printk(KERN_EMERG "Attempting to continue.\n");
-
-	mcgstl &= ~(1<<2);
-	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-}
-
-
-/* AMD K7 machine check is Intel like: */
-void amd_mcheck_init(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int i;
-
-	if (!cpu_has(c, X86_FEATURE_MCE))
-		return;
-
-	machine_check_vector = k7_machine_check;
-	/* Make sure the vector pointer is visible before we enable MCEs: */
-	wmb();
-
-	printk(KERN_INFO "Intel machine check architecture supported.\n");
-
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<8))	/* Control register present ? */
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-	nr_mce_banks = l & 0xff;
-
-	/*
-	 * Clear status for MC index 0 separately, we don't touch CTL,
-	 * as some K7 Athlons cause spurious MCEs when its enabled:
-	 */
-	if (boot_cpu_data.x86 == 6) {
-		wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
-		i = 1;
-	} else
-		i = 0;
-
-	for (; i < nr_mce_banks; i++) {
-		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-	}
-
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
-		smp_processor_id());
-}
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 7da8fec9ca8..5ff6362ecb1 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -58,8 +58,6 @@ void (*machine_check_vector)(struct pt_regs *, long error_code) =
 
 int mce_disabled __read_mostly;
 
-#ifdef CONFIG_X86_NEW_MCE
-
 #define MISC_MCELOG_MINOR	227
 
 #define SPINUNIT 100	/* 100ns */
@@ -1993,51 +1991,6 @@ static __init int mce_init_device(void)
 
 device_initcall(mce_init_device);
 
-#else /* CONFIG_X86_OLD_MCE: */
-
-int nr_mce_banks;
-EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
-
-/* This has to be run for each processor */
-void mcheck_init(struct cpuinfo_x86 *c)
-{
-	if (mce_disabled)
-		return;
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		amd_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		if (c->x86 == 5)
-			intel_p5_mcheck_init(c);
-		if (c->x86 == 6)
-			intel_p6_mcheck_init(c);
-		if (c->x86 == 15)
-			intel_p4_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_CENTAUR:
-		if (c->x86 == 5)
-			winchip_mcheck_init(c);
-		break;
-
-	default:
-		break;
-	}
-	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks);
-}
-
-static int __init mcheck_enable(char *str)
-{
-	mce_p5_enabled = 1;
-	return 1;
-}
-__setup("mce", mcheck_enable);
-
-#endif /* CONFIG_X86_OLD_MCE */
-
 /*
  * Old style boot options parsing. Only for compatibility.
  */
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
deleted file mode 100644
index f5f2d6f71fb..00000000000
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Non Fatal Machine Check Exception Reporting
- *
- * (C) Copyright 2002 Dave Jones. <davej@redhat.com>
- *
- * This file contains routines to check for non-fatal MCEs every 15s
- *
- */
-#include <linux/interrupt.h>
-#include <linux/workqueue.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-static int		firstbank;
-
-#define MCE_RATE	(15*HZ)	/* timer rate is 15s */
-
-static void mce_checkregs(void *info)
-{
-	u32 low, high;
-	int i;
-
-	for (i = firstbank; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-
-		if (!(high & (1<<31)))
-			continue;
-
-		printk(KERN_INFO "MCE: The hardware reports a non fatal, "
-			"correctable incident occurred on CPU %d.\n",
-				smp_processor_id());
-
-		printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
-
-		/*
-		 * Scrub the error so we don't pick it up in MCE_RATE
-		 * seconds time:
-		 */
-		wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
-
-		/* Serialize: */
-		wmb();
-		add_taint(TAINT_MACHINE_CHECK);
-	}
-}
-
-static void mce_work_fn(struct work_struct *work);
-static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
-
-static void mce_work_fn(struct work_struct *work)
-{
-	on_each_cpu(mce_checkregs, NULL, 1);
-	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
-}
-
-static int __init init_nonfatal_mce_checker(void)
-{
-	struct cpuinfo_x86 *c = &boot_cpu_data;
-
-	/* Check for MCE support */
-	if (!cpu_has(c, X86_FEATURE_MCE))
-		return -ENODEV;
-
-	/* Check for PPro style MCA */
-	if (!cpu_has(c, X86_FEATURE_MCA))
-		return -ENODEV;
-
-	/* Some Athlons misbehave when we frob bank 0 */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-						boot_cpu_data.x86 == 6)
-		firstbank = 1;
-	else
-		firstbank = 0;
-
-	/*
-	 * Check for non-fatal errors every MCE_RATE s
-	 */
-	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
-	printk(KERN_INFO "Machine check exception polling timer started.\n");
-
-	return 0;
-}
-module_init(init_nonfatal_mce_checker);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
deleted file mode 100644
index 4482aea9aa2..00000000000
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * P4 specific Machine Check Exception Reporting
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-/* as supported by the P4/Xeon family */
-struct intel_mce_extended_msrs {
-	u32 eax;
-	u32 ebx;
-	u32 ecx;
-	u32 edx;
-	u32 esi;
-	u32 edi;
-	u32 ebp;
-	u32 esp;
-	u32 eflags;
-	u32 eip;
-	/* u32 *reserved[]; */
-};
-
-static int mce_num_extended_msrs;
-
-/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
-static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
-{
-	u32 h;
-
-	rdmsr(MSR_IA32_MCG_EAX, r->eax, h);
-	rdmsr(MSR_IA32_MCG_EBX, r->ebx, h);
-	rdmsr(MSR_IA32_MCG_ECX, r->ecx, h);
-	rdmsr(MSR_IA32_MCG_EDX, r->edx, h);
-	rdmsr(MSR_IA32_MCG_ESI, r->esi, h);
-	rdmsr(MSR_IA32_MCG_EDI, r->edi, h);
-	rdmsr(MSR_IA32_MCG_EBP, r->ebp, h);
-	rdmsr(MSR_IA32_MCG_ESP, r->esp, h);
-	rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h);
-	rdmsr(MSR_IA32_MCG_EIP, r->eip, h);
-}
-
-static void intel_machine_check(struct pt_regs *regs, long error_code)
-{
-	u32 alow, ahigh, high, low;
-	u32 mcgstl, mcgsth;
-	int recover = 1;
-	int i;
-
-	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover = 0;
-
-	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
-		smp_processor_id(), mcgsth, mcgstl);
-
-	if (mce_num_extended_msrs > 0) {
-		struct intel_mce_extended_msrs dbg;
-
-		intel_get_extended_msrs(&dbg);
-
-		printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"
-			"\teax: %08x ebx: %08x ecx: %08x edx: %08x\n"
-			"\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
-			smp_processor_id(), dbg.eip, dbg.eflags,
-			dbg.eax, dbg.ebx, dbg.ecx, dbg.edx,
-			dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
-	}
-
-	for (i = 0; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high & (1<<31)) {
-			char misc[20];
-			char addr[24];
-
-			misc[0] = addr[0] = '\0';
-			if (high & (1<<29))
-				recover |= 1;
-			if (high & (1<<25))
-				recover |= 2;
-			high &= ~(1<<31);
-			if (high & (1<<27)) {
-				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
-			}
-			if (high & (1<<26)) {
-				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
-			}
-			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
-				smp_processor_id(), i, high, low, misc, addr);
-		}
-	}
-
-	if (recover & 2)
-		panic("CPU context corrupt");
-	if (recover & 1)
-		panic("Unable to continue");
-
-	printk(KERN_EMERG "Attempting to continue.\n");
-
-	/*
-	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
-	 * recoverable/continuable.This will allow BIOS to look at the MSRs
-	 * for errors if the OS could not log the error.
-	 */
-	for (i = 0; i < nr_mce_banks; i++) {
-		u32 msr;
-		msr = MSR_IA32_MC0_STATUS+i*4;
-		rdmsr(msr, low, high);
-		if (high&(1<<31)) {
-			/* Clear it */
-			wrmsr(msr, 0UL, 0UL);
-			/* Serialize */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-	}
-	mcgstl &= ~(1<<2);
-	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-}
-
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int i;
-
-	machine_check_vector = intel_machine_check;
-	wmb();
-
-	printk(KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<8))	/* Control register present ? */
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-	nr_mce_banks = l & 0xff;
-
-	for (i = 0; i < nr_mce_banks; i++) {
-		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-	}
-
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
-		smp_processor_id());
-
-	/* Check for P4/Xeon extended MCE MSRs */
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<9))	{/* MCG_EXT_P */
-		mce_num_extended_msrs = (l >> 16) & 0xff;
-		printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
-				" available\n",
-			smp_processor_id(), mce_num_extended_msrs);
-
-#ifdef CONFIG_X86_MCE_P4THERMAL
-		/* Check for P4/Xeon Thermal monitor */
-		intel_init_thermal(c);
-#endif
-	}
-}
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
deleted file mode 100644
index 01e4f817818..00000000000
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * P6 specific Machine Check Exception Reporting
- * (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
- */
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/mce.h>
-#include <asm/msr.h>
-
-/* Machine Check Handler For PII/PIII */
-static void intel_machine_check(struct pt_regs *regs, long error_code)
-{
-	u32 alow, ahigh, high, low;
-	u32 mcgstl, mcgsth;
-	int recover = 1;
-	int i;
-
-	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover = 0;
-
-	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
-		smp_processor_id(), mcgsth, mcgstl);
-
-	for (i = 0; i < nr_mce_banks; i++) {
-		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
-		if (high & (1<<31)) {
-			char misc[20];
-			char addr[24];
-
-			misc[0] = '\0';
-			addr[0] = '\0';
-
-			if (high & (1<<29))
-				recover |= 1;
-			if (high & (1<<25))
-				recover |= 2;
-			high &= ~(1<<31);
-
-			if (high & (1<<27)) {
-				rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
-				snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
-			}
-			if (high & (1<<26)) {
-				rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
-				snprintf(addr, 24, " at %08x%08x", ahigh, alow);
-			}
-
-			printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
-				smp_processor_id(), i, high, low, misc, addr);
-		}
-	}
-
-	if (recover & 2)
-		panic("CPU context corrupt");
-	if (recover & 1)
-		panic("Unable to continue");
-
-	printk(KERN_EMERG "Attempting to continue.\n");
-	/*
-	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
-	 * recoverable/continuable.This will allow BIOS to look at the MSRs
-	 * for errors if the OS could not log the error:
-	 */
-	for (i = 0; i < nr_mce_banks; i++) {
-		unsigned int msr;
-
-		msr = MSR_IA32_MC0_STATUS+i*4;
-		rdmsr(msr, low, high);
-		if (high & (1<<31)) {
-			/* Clear it: */
-			wrmsr(msr, 0UL, 0UL);
-			/* Serialize: */
-			wmb();
-			add_taint(TAINT_MACHINE_CHECK);
-		}
-	}
-	mcgstl &= ~(1<<2);
-	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
-}
-
-/* Set up machine check reporting for processors with Intel style MCE: */
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int i;
-
-	/* Check for MCE support */
-	if (!cpu_has(c, X86_FEATURE_MCE))
-		return;
-
-	/* Check for PPro style MCA */
-	if (!cpu_has(c, X86_FEATURE_MCA))
-		return;
-
-	/* Ok machine check is available */
-	machine_check_vector = intel_machine_check;
-	/* Make sure the vector pointer is visible before we enable MCEs: */
-	wmb();
-
-	printk(KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr(MSR_IA32_MCG_CAP, l, h);
-	if (l & (1<<8))	/* Control register present ? */
-		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
-	nr_mce_banks = l & 0xff;
-
-	/*
-	 * Following the example in IA-32 SDM Vol 3:
-	 * - MC0_CTL should not be written
-	 * - Status registers on all banks should be cleared on reset
-	 */
-	for (i = 1; i < nr_mce_banks; i++)
-		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
-
-	for (i = 0; i < nr_mce_banks; i++)
-		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-
-	set_in_cr4(X86_CR4_MCE);
-	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
-		smp_processor_id());
-}
-- 
cgit v1.2.3


From c1ebf835617035b1f08f734247dcb981e17aac6b Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:41 +0200
Subject: x86: mce: Rename CONFIG_X86_NEW_MCE to CONFIG_X86_MCE

Drop the CONFIG_X86_NEW_MCE symbol and change all
references to it to check for CONFIG_X86_MCE directly.

No code changes

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig                    | 11 +++--------
 arch/x86/include/asm/entry_arch.h   |  2 +-
 arch/x86/kernel/apic/nmi.c          |  2 +-
 arch/x86/kernel/cpu/mcheck/Makefile |  3 +--
 arch/x86/kernel/irq.c               |  4 ++--
 arch/x86/kernel/irqinit.c           |  2 +-
 arch/x86/kernel/signal.c            |  2 +-
 7 files changed, 10 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d986769a7d9..06880ca677f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -781,15 +781,10 @@ config X86_MCE
 	  The action the kernel takes depends on the severity of the problem,
 	  ranging from warning messages to halting the machine.
 
-config X86_NEW_MCE
-	depends on X86_MCE
-	bool
-	default y
-
 config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@@ -797,7 +792,7 @@ config X86_MCE_INTEL
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
@@ -817,7 +812,7 @@ config X86_MCE_THRESHOLD
 	default y
 
 config X86_MCE_INJECT
-	depends on X86_NEW_MCE
+	depends on X86_MCE
 	tristate "Machine check injector support"
 	---help---
 	  Provide support for injecting machine checks for testing purposes.
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index ff8cbfa0785..5e3f2044f0d 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -61,7 +61,7 @@ BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
 BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
 #endif
 
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 BUILD_INTERRUPT(mce_self_interrupt,MCE_SELF_VECTOR)
 #endif
 
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index b3025b43b63..f4227289caf 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -66,7 +66,7 @@ static inline unsigned int get_nmi_count(int cpu)
 
 static inline int mce_in_progress(void)
 {
-#if defined(CONFIG_X86_NEW_MCE)
+#if defined(CONFIG_X86_MCE)
 	return atomic_read(&mce_entry) > 0;
 #endif
 	return 0;
diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile
index 022a036ce21..4ac6d48fe11 100644
--- a/arch/x86/kernel/cpu/mcheck/Makefile
+++ b/arch/x86/kernel/cpu/mcheck/Makefile
@@ -1,6 +1,5 @@
-obj-y				=  mce.o
+obj-y				=  mce.o mce-severity.o
 
-obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
 obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
 obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
 obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd.o
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index b0cdde6932f..74656d1d4e3 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -104,7 +104,7 @@ static int show_other_interrupts(struct seq_file *p, int prec)
 	seq_printf(p, "  Threshold APIC interrupts\n");
 # endif
 #endif
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 	seq_printf(p, "%*s: ", prec, "MCE");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", per_cpu(mce_exception_count, j));
@@ -200,7 +200,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
 	sum += irq_stats(cpu)->irq_threshold_count;
 # endif
 #endif
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 	sum += per_cpu(mce_exception_count, cpu);
 	sum += per_cpu(mce_poll_count, cpu);
 #endif
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 696f0e475c2..8a194ad357e 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -190,7 +190,7 @@ static void __init apic_intr_init(void)
 #ifdef CONFIG_X86_THRESHOLD
 	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 #endif
-#if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
+#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_LOCAL_APIC)
 	alloc_intr_gate(MCE_SELF_VECTOR, mce_self_interrupt);
 #endif
 
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 4c578751e94..cc26ad4c307 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -856,7 +856,7 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-#ifdef CONFIG_X86_NEW_MCE
+#ifdef CONFIG_X86_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
 		mce_notify_process();
-- 
cgit v1.2.3


From 9eda8cb3ac235217e4ffa01cb9cedee1c1550599 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:42 +0200
Subject: x86: mce: Move code in mce.c

Now that the X86_OLD_MCE ifdefs are gone move some code that
used to be outside the big ifdef to a more natural place
near its user.

No code change.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 5ff6362ecb1..e16271f01ac 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -45,17 +45,6 @@
 
 #include "mce-internal.h"
 
-/* Handle unconfigured int18 (should never happen) */
-static void unexpected_machine_check(struct pt_regs *regs, long error_code)
-{
-	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
-	       smp_processor_id());
-}
-
-/* Call the installed machine check handler for this CPU setup. */
-void (*machine_check_vector)(struct pt_regs *, long error_code) =
-						unexpected_machine_check;
-
 int mce_disabled __read_mostly;
 
 #define MISC_MCELOG_MINOR	227
@@ -1322,6 +1311,17 @@ static void mce_init_timer(void)
 	add_timer(t);
 }
 
+/* Handle unconfigured int18 (should never happen) */
+static void unexpected_machine_check(struct pt_regs *regs, long error_code)
+{
+	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
+	       smp_processor_id());
+}
+
+/* Call the installed machine check handler for this CPU setup. */
+void (*machine_check_vector)(struct pt_regs *, long error_code) =
+						unexpected_machine_check;
+
 /*
  * Called for each booted CPU to set up machine checks.
  * Must be called with preempt off:
-- 
cgit v1.2.3


From cebe182033f156b430952370fb0f9dbe6e89b081 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:43 +0200
Subject: x86: mce: Move per bank data in a single datastructure

This addresses one of the leftover review comments.

Move the per bank data into a single structure. This avoids
several separate variables and also separate allocation of sysfs objects.

I didn't move the CMCI ownership information so far because
that would have needed some non trivial changes in the algorithms.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce-internal.h |  14 ++++
 arch/x86/kernel/cpu/mcheck/mce.c          | 109 +++++++++++++++---------------
 2 files changed, 67 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index 54dcb8ff12e..6bd51e7ba87 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -1,3 +1,4 @@
+#include <linux/sysdev.h>
 #include <asm/mce.h>
 
 enum severity_level {
@@ -10,6 +11,19 @@ enum severity_level {
 	MCE_PANIC_SEVERITY,
 };
 
+#define ATTR_LEN		16
+
+/* One object for each MCE bank, shared by all CPUs */
+struct mce_bank {
+	u64			ctl;			/* subevents to enable */
+	unsigned char init;				/* initialise bank? */
+	struct sysdev_attribute attr;			/* sysdev attribute */
+	char			attrname[ATTR_LEN];	/* attribute name */
+};
+
 int mce_severity(struct mce *a, int tolerant, char **msg);
 
 extern int mce_ser;
+
+extern struct mce_bank *mce_banks;
+
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index e16271f01ac..a04806e01a8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -64,7 +64,6 @@ DEFINE_PER_CPU(unsigned, mce_exception_count);
  */
 static int			tolerant		__read_mostly = 1;
 static int			banks			__read_mostly;
-static u64			*bank			__read_mostly;
 static int			rip_msr			__read_mostly;
 static int			mce_bootlog		__read_mostly = -1;
 static int			monarch_timeout		__read_mostly = -1;
@@ -74,13 +73,13 @@ int				mce_cmci_disabled	__read_mostly;
 int				mce_ignore_ce		__read_mostly;
 int				mce_ser			__read_mostly;
 
+struct mce_bank                *mce_banks		__read_mostly;
+
 /* User mode helper program triggered by machine check event */
 static unsigned long		mce_need_notify;
 static char			mce_helper[128];
 static char			*mce_helper_argv[2] = { mce_helper, NULL };
 
-static unsigned long		dont_init_banks;
-
 static DECLARE_WAIT_QUEUE_HEAD(mce_wait);
 static DEFINE_PER_CPU(struct mce, mces_seen);
 static int			cpu_missing;
@@ -91,11 +90,6 @@ DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
 	[0 ... BITS_TO_LONGS(MAX_NR_BANKS)-1] = ~0UL
 };
 
-static inline int skip_bank_init(int i)
-{
-	return i < BITS_PER_LONG && test_bit(i, &dont_init_banks);
-}
-
 static DEFINE_PER_CPU(struct work_struct, mce_work);
 
 /* Do initial initialization of a struct mce */
@@ -482,7 +476,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 
 	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
 	for (i = 0; i < banks; i++) {
-		if (!bank[i] || !test_bit(i, *b))
+		if (!mce_banks[i].ctl || !test_bit(i, *b))
 			continue;
 
 		m.misc = 0;
@@ -903,7 +897,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	order = mce_start(&no_way_out);
 	for (i = 0; i < banks; i++) {
 		__clear_bit(i, toclear);
-		if (!bank[i])
+		if (!mce_banks[i].ctl)
 			continue;
 
 		m.misc = 0;
@@ -1146,6 +1140,21 @@ int mce_notify_irq(void)
 }
 EXPORT_SYMBOL_GPL(mce_notify_irq);
 
+static int mce_banks_init(void)
+{
+	int i;
+
+	mce_banks = kzalloc(banks * sizeof(struct mce_bank), GFP_KERNEL);
+	if (!mce_banks)
+		return -ENOMEM;
+	for (i = 0; i < banks; i++) {
+		struct mce_bank *b = &mce_banks[i];
+		b->ctl = -1ULL;
+		b->init = 1;
+	}
+	return 0;
+}
+
 /*
  * Initialize Machine Checks for a CPU.
  */
@@ -1169,11 +1178,10 @@ static int mce_cap_init(void)
 	/* Don't support asymmetric configurations today */
 	WARN_ON(banks != 0 && b != banks);
 	banks = b;
-	if (!bank) {
-		bank = kmalloc(banks * sizeof(u64), GFP_KERNEL);
-		if (!bank)
-			return -ENOMEM;
-		memset(bank, 0xff, banks * sizeof(u64));
+	if (!mce_banks) {
+		int err = mce_banks_init();
+		if (err)
+			return err;
 	}
 
 	/* Use accurate RIP reporting if available. */
@@ -1205,9 +1213,10 @@ static void mce_init(void)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 
 	for (i = 0; i < banks; i++) {
-		if (skip_bank_init(i))
+		struct mce_bank *b = &mce_banks[i];
+		if (!b->init)
 			continue;
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]);
+		wrmsrl(MSR_IA32_MC0_CTL+4*i, b->ctl);
 		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
 	}
 }
@@ -1223,7 +1232,7 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 			 * trips off incorrectly with the IOMMU & 3ware
 			 * & Cerberus:
 			 */
-			clear_bit(10, (unsigned long *)&bank[4]);
+			clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
 		}
 		if (c->x86 <= 17 && mce_bootlog < 0) {
 			/*
@@ -1237,7 +1246,7 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 		 * by default.
 		 */
 		 if (c->x86 == 6 && banks > 0)
-			bank[0] = 0;
+			mce_banks[0].ctl = 0;
 	}
 
 	if (c->x86_vendor == X86_VENDOR_INTEL) {
@@ -1250,8 +1259,8 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 		 * valid event later, merely don't write CTL0.
 		 */
 
-		if (c->x86 == 6 && c->x86_model < 0x1A)
-			__set_bit(0, &dont_init_banks);
+		if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0)
+			mce_banks[0].init = 0;
 
 		/*
 		 * All newer Intel systems support MCE broadcasting. Enable
@@ -1578,7 +1587,8 @@ static int mce_disable(void)
 	int i;
 
 	for (i = 0; i < banks; i++) {
-		if (!skip_bank_init(i))
+		struct mce_bank *b = &mce_banks[i];
+		if (b->init)
 			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
 	}
 	return 0;
@@ -1654,14 +1664,15 @@ DEFINE_PER_CPU(struct sys_device, mce_dev);
 __cpuinitdata
 void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
-static struct sysdev_attribute *bank_attrs;
+static inline struct mce_bank *attr_to_bank(struct sysdev_attribute *attr)
+{
+	return container_of(attr, struct mce_bank, attr);
+}
 
 static ssize_t show_bank(struct sys_device *s, struct sysdev_attribute *attr,
 			 char *buf)
 {
-	u64 b = bank[attr - bank_attrs];
-
-	return sprintf(buf, "%llx\n", b);
+	return sprintf(buf, "%llx\n", attr_to_bank(attr)->ctl);
 }
 
 static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
@@ -1672,7 +1683,7 @@ static ssize_t set_bank(struct sys_device *s, struct sysdev_attribute *attr,
 	if (strict_strtoull(buf, 0, &new) < 0)
 		return -EINVAL;
 
-	bank[attr - bank_attrs] = new;
+	attr_to_bank(attr)->ctl = new;
 	mce_restart();
 
 	return size;
@@ -1816,7 +1827,7 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 	}
 	for (j = 0; j < banks; j++) {
 		err = sysdev_create_file(&per_cpu(mce_dev, cpu),
-					&bank_attrs[j]);
+					&mce_banks[j].attr);
 		if (err)
 			goto error2;
 	}
@@ -1825,10 +1836,10 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 	return 0;
 error2:
 	while (--j >= 0)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[j]);
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[j].attr);
 error:
 	while (--i >= 0)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[i].attr);
 
 	sysdev_unregister(&per_cpu(mce_dev, cpu));
 
@@ -1846,7 +1857,7 @@ static __cpuinit void mce_remove_device(unsigned int cpu)
 		sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]);
 
 	for (i = 0; i < banks; i++)
-		sysdev_remove_file(&per_cpu(mce_dev, cpu), &bank_attrs[i]);
+		sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[i].attr);
 
 	sysdev_unregister(&per_cpu(mce_dev, cpu));
 	cpumask_clear_cpu(cpu, mce_dev_initialized);
@@ -1863,7 +1874,8 @@ static void mce_disable_cpu(void *h)
 	if (!(action & CPU_TASKS_FROZEN))
 		cmci_clear();
 	for (i = 0; i < banks; i++) {
-		if (!skip_bank_init(i))
+		struct mce_bank *b = &mce_banks[i];
+		if (b->init)
 			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
 	}
 }
@@ -1879,8 +1891,9 @@ static void mce_reenable_cpu(void *h)
 	if (!(action & CPU_TASKS_FROZEN))
 		cmci_reenable();
 	for (i = 0; i < banks; i++) {
-		if (!skip_bank_init(i))
-			wrmsrl(MSR_IA32_MC0_CTL + i*4, bank[i]);
+		struct mce_bank *b = &mce_banks[i];
+		if (b->init)
+			wrmsrl(MSR_IA32_MC0_CTL + i*4, b->ctl);
 	}
 }
 
@@ -1928,35 +1941,21 @@ static struct notifier_block mce_cpu_notifier __cpuinitdata = {
 	.notifier_call = mce_cpu_callback,
 };
 
-static __init int mce_init_banks(void)
+static __init void mce_init_banks(void)
 {
 	int i;
 
-	bank_attrs = kzalloc(sizeof(struct sysdev_attribute) * banks,
-				GFP_KERNEL);
-	if (!bank_attrs)
-		return -ENOMEM;
-
 	for (i = 0; i < banks; i++) {
-		struct sysdev_attribute *a = &bank_attrs[i];
+		struct mce_bank *b = &mce_banks[i];
+		struct sysdev_attribute *a = &b->attr;
 
-		a->attr.name	= kasprintf(GFP_KERNEL, "bank%d", i);
-		if (!a->attr.name)
-			goto nomem;
+		a->attr.name	= b->attrname;
+		snprintf(b->attrname, ATTR_LEN, "bank%d", i);
 
 		a->attr.mode	= 0644;
 		a->show		= show_bank;
 		a->store	= set_bank;
 	}
-	return 0;
-
-nomem:
-	while (--i >= 0)
-		kfree(bank_attrs[i].attr.name);
-	kfree(bank_attrs);
-	bank_attrs = NULL;
-
-	return -ENOMEM;
 }
 
 static __init int mce_init_device(void)
@@ -1969,9 +1968,7 @@ static __init int mce_init_device(void)
 
 	zalloc_cpumask_var(&mce_dev_initialized, GFP_KERNEL);
 
-	err = mce_init_banks();
-	if (err)
-		return err;
+	mce_init_banks();
 
 	err = sysdev_class_register(&mce_sysclass);
 	if (err)
-- 
cgit v1.2.3


From a2d32bcbc008aa0f9c301a7c6f3494cb23e6af54 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:44 +0200
Subject: x86: mce: macros to compute banks MSRs

Instead of open coded calculations for bank MSRs hide the indexing of higher
banks MCE register MSRs in new macros.

No semantic changes.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/msr-index.h       |  7 +++++++
 arch/x86/kernel/cpu/mcheck/mce.c       | 34 +++++++++++++++++-----------------
 arch/x86/kernel/cpu/mcheck/mce_intel.c | 10 +++++-----
 3 files changed, 29 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 1692fb5050e..3d1ce094586 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -81,8 +81,15 @@
 #define MSR_IA32_MC0_ADDR		0x00000402
 #define MSR_IA32_MC0_MISC		0x00000403
 
+#define MSR_IA32_MCx_CTL(x)		(MSR_IA32_MC0_CTL + 4*(x))
+#define MSR_IA32_MCx_STATUS(x)		(MSR_IA32_MC0_STATUS + 4*(x))
+#define MSR_IA32_MCx_ADDR(x)		(MSR_IA32_MC0_ADDR + 4*(x))
+#define MSR_IA32_MCx_MISC(x)		(MSR_IA32_MC0_MISC + 4*(x))
+
 /* These are consecutive and not in the normal 4er MCE bank block */
 #define MSR_IA32_MC0_CTL2		0x00000280
+#define MSR_IA32_MCx_CTL2(x)		(MSR_IA32_MC0_CTL2 + (x))
+
 #define CMCI_EN			(1ULL << 30)
 #define CMCI_THRESHOLD_MASK		0xffffULL
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index a04806e01a8..07139a0578e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -267,11 +267,11 @@ static int msr_to_offset(u32 msr)
 	unsigned bank = __get_cpu_var(injectm.bank);
 	if (msr == rip_msr)
 		return offsetof(struct mce, ip);
-	if (msr == MSR_IA32_MC0_STATUS + bank*4)
+	if (msr == MSR_IA32_MCx_STATUS(bank))
 		return offsetof(struct mce, status);
-	if (msr == MSR_IA32_MC0_ADDR + bank*4)
+	if (msr == MSR_IA32_MCx_ADDR(bank))
 		return offsetof(struct mce, addr);
-	if (msr == MSR_IA32_MC0_MISC + bank*4)
+	if (msr == MSR_IA32_MCx_MISC(bank))
 		return offsetof(struct mce, misc);
 	if (msr == MSR_IA32_MCG_STATUS)
 		return offsetof(struct mce, mcgstatus);
@@ -485,7 +485,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		m.tsc = 0;
 
 		barrier();
-		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		m.status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
 		if (!(m.status & MCI_STATUS_VAL))
 			continue;
 
@@ -500,9 +500,9 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 			continue;
 
 		if (m.status & MCI_STATUS_MISCV)
-			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+			m.misc = mce_rdmsrl(MSR_IA32_MCx_MISC(i));
 		if (m.status & MCI_STATUS_ADDRV)
-			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+			m.addr = mce_rdmsrl(MSR_IA32_MCx_ADDR(i));
 
 		if (!(flags & MCP_TIMESTAMP))
 			m.tsc = 0;
@@ -518,7 +518,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		/*
 		 * Clear state for this bank.
 		 */
-		mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+		mce_wrmsrl(MSR_IA32_MCx_STATUS(i), 0);
 	}
 
 	/*
@@ -539,7 +539,7 @@ static int mce_no_way_out(struct mce *m, char **msg)
 	int i;
 
 	for (i = 0; i < banks; i++) {
-		m->status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
 		if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
 			return 1;
 	}
@@ -823,7 +823,7 @@ static void mce_clear_state(unsigned long *toclear)
 
 	for (i = 0; i < banks; i++) {
 		if (test_bit(i, toclear))
-			mce_wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+			mce_wrmsrl(MSR_IA32_MCx_STATUS(i), 0);
 	}
 }
 
@@ -904,7 +904,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 		m.addr = 0;
 		m.bank = i;
 
-		m.status = mce_rdmsrl(MSR_IA32_MC0_STATUS + i*4);
+		m.status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
 		if ((m.status & MCI_STATUS_VAL) == 0)
 			continue;
 
@@ -945,9 +945,9 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 			kill_it = 1;
 
 		if (m.status & MCI_STATUS_MISCV)
-			m.misc = mce_rdmsrl(MSR_IA32_MC0_MISC + i*4);
+			m.misc = mce_rdmsrl(MSR_IA32_MCx_MISC(i));
 		if (m.status & MCI_STATUS_ADDRV)
-			m.addr = mce_rdmsrl(MSR_IA32_MC0_ADDR + i*4);
+			m.addr = mce_rdmsrl(MSR_IA32_MCx_ADDR(i));
 
 		/*
 		 * Action optional error. Queue address for later processing.
@@ -1216,8 +1216,8 @@ static void mce_init(void)
 		struct mce_bank *b = &mce_banks[i];
 		if (!b->init)
 			continue;
-		wrmsrl(MSR_IA32_MC0_CTL+4*i, b->ctl);
-		wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0);
+		wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
+		wrmsrl(MSR_IA32_MCx_STATUS(i), 0);
 	}
 }
 
@@ -1589,7 +1589,7 @@ static int mce_disable(void)
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
 		if (b->init)
-			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
 	return 0;
 }
@@ -1876,7 +1876,7 @@ static void mce_disable_cpu(void *h)
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
 		if (b->init)
-			wrmsrl(MSR_IA32_MC0_CTL + i*4, 0);
+			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
 }
 
@@ -1893,7 +1893,7 @@ static void mce_reenable_cpu(void *h)
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
 		if (b->init)
-			wrmsrl(MSR_IA32_MC0_CTL + i*4, b->ctl);
+			wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
 	}
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index e1acec0f7a3..889f665fe93 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -90,7 +90,7 @@ static void cmci_discover(int banks, int boot)
 		if (test_bit(i, owned))
 			continue;
 
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Already owned by someone else? */
 		if (val & CMCI_EN) {
@@ -101,8 +101,8 @@ static void cmci_discover(int banks, int boot)
 		}
 
 		val |= CMCI_EN | CMCI_THRESHOLD;
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
+		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Did the enable bit stick? -- the bank supports CMCI */
 		if (val & CMCI_EN) {
@@ -152,9 +152,9 @@ void cmci_clear(void)
 		if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
 			continue;
 		/* Disable CMCI */
-		rdmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 		val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK);
-		wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
+		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
 		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
 	spin_unlock_irqrestore(&cmci_discover_lock, flags);
-- 
cgit v1.2.3


From 3ccdccfadbd2548abe38682b587f4ba27eac2fc9 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Thu, 9 Jul 2009 00:31:45 +0200
Subject: x86: mce: Lower maximum number of banks to architecture limit

The Intel x86 architecture right now only supports 32 machine check
banks, more would bump into other MSRs.

So lower the max define to 32.

This only affects a few bitmaps, most data structures are dynamically
sized anyways.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/mce.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 6b8a974e127..ad753537291 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -130,10 +130,11 @@ void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, mce_dev);
 
 /*
- * To support more than 128 would need to escape the predefined
- * Linux defined extended banks first.
+ * Maximum banks number.
+ * This is the limit of the current register layout on
+ * Intel CPUs.
  */
-#define MAX_NR_BANKS (MCE_EXTENDED_BANK - 1)
+#define MAX_NR_BANKS 32
 
 #ifdef CONFIG_X86_MCE_INTEL
 extern int mce_cmci_disabled;
-- 
cgit v1.2.3


From 8d7ff4f2a0b22b7d6d7bc3982257d1dadea22824 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 23 Jun 2009 11:48:14 +0200
Subject: x86/oprofile: rename kernel parameter for architectural perfmon to
 arch_perfmon

The short name of the achitecture is 'arch_perfmon'. This patch
changes the kernel parameter to use this name.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/oprofile/nmi_int.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b07dd8d0b32..89b9a5cd63d 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -390,7 +390,7 @@ static int __init p4_init(char **cpu_type)
 static int force_arch_perfmon;
 static int force_cpu_type(const char *str, struct kernel_param *kp)
 {
-	if (!strcmp(str, "archperfmon")) {
+	if (!strcmp(str, "arch_perfmon")) {
 		force_arch_perfmon = 1;
 		printk(KERN_INFO "oprofile: forcing architectural perfmon\n");
 	}
-- 
cgit v1.2.3


From 2802e34590f290173a3f2aa5a4d662ae5373b420 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 9 Jul 2009 14:45:59 +0000
Subject: sh: Clean up linker script using new linker script macros.

This patch converts the sh architecture to use the new linker script
macros in include/asm-generic/vmlinux.lds.h.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/vmlinux.lds.S | 87 ++++++--------------------------------------
 1 file changed, 11 insertions(+), 76 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index f53c76acaed..674ed8feb8a 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -50,12 +50,7 @@ SECTIONS
 		_etext = .;		/* End of text section */
 	} = 0x0009
 
-	. = ALIGN(16);		/* Exception table */
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	NOTES
 	RO_DATA(PAGE_SIZE)
@@ -71,69 +66,14 @@ SECTIONS
 		__uncached_end = .;
 	}
 
-	. = ALIGN(THREAD_SIZE);
-	.data : AT(ADDR(.data) - LOAD_OFFSET) {		/* Data */
-		*(.data.init_task)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.cacheline_aligned)
-
-		. = ALIGN(L1_CACHE_BYTES);
-		*(.data.read_mostly)
-
-		. = ALIGN(PAGE_SIZE);
-		*(.data.page_aligned)
-
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		DATA_DATA
-		CONSTRUCTORS
-	}
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
 	_edata = .;			/* End of data section */
 
 	. = ALIGN(PAGE_SIZE);		/* Init code and data */
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		__init_begin = .;
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-
-	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA }
-
-	. = ALIGN(16);
-	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-
-	SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
+	__init_begin = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 
 	. = ALIGN(4);
 	.machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) {
@@ -152,16 +92,11 @@ SECTIONS
 	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA }
 
 	. = ALIGN(PAGE_SIZE);
-	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-		__init_end = .;
-		__bss_start = .;		/* BSS */
-		*(.bss.page_aligned)
-		*(.bss)
-		*(COMMON)
-		. = ALIGN(4);
-		_ebss = .;			/* uClinux MTD sucks */
-		_end = . ;
-	}
+	__init_end = .;
+	BSS(PAGE_SIZE)
+	. = ALIGN(4);
+	_ebss = .;			/* uClinux MTD sucks */
+	_end = . ;
 
 	/*
 	 * When something in the kernel is NOT compiled as a module, the
@@ -170,7 +105,7 @@ SECTIONS
 	 * it's a module.
 	 */
 	/DISCARD/ : {
-		*(.exitcall.exit)
+		EXIT_CALL
 	}
 
 	STABS_DEBUG
-- 
cgit v1.2.3


From 11d1578f9454159c43499d1d8fe8a7d728c176a3 Mon Sep 17 00:00:00 2001
From: Vince Weaver <vince@deater.net>
Date: Wed, 8 Jul 2009 17:46:14 -0400
Subject: perf_counter: Add P6 PMU support

Add basic P6 PMU support. The P6 uses the EVNTSEL0 EN bit to
enable/disable both its counters. We use this for the
global enable/disable, and clear all config bits (except EN)
to disable individual counters.

Actual ia32 hardware doesn't support lfence, so use a locked
op without side-effect to implement a full barrier.

perf stat and perf record seem to function correctly.

[a.p.zijlstra@chello.nl: cleanups and complete the enable/disable code]

Signed-off-by: Vince Weaver <vince@deater.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <Pine.LNX.4.64.0907081718450.2715@pianoman.cluster.toy>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 227 ++++++++++++++++++++++++++++++++++---
 1 file changed, 213 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 36c3dc7b899..1910f39ff19 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -65,6 +65,44 @@ static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = {
 	.enabled = 1,
 };
 
+/*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0000,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0000,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
+};
+
+static u64 p6_pmu_event_map(int event)
+{
+	return p6_perfmon_event_map[event];
+}
+
+static u64 p6_pmu_raw_event(u64 event)
+{
+#define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK		0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK		0x00040000ULL
+#define P6_EVNTSEL_INV_MASK		0x00800000ULL
+#define P6_EVNTSEL_COUNTER_MASK		0xFF000000ULL
+
+#define P6_EVNTSEL_MASK			\
+	(P6_EVNTSEL_EVENT_MASK |	\
+	 P6_EVNTSEL_UNIT_MASK  |	\
+	 P6_EVNTSEL_EDGE_MASK  |	\
+	 P6_EVNTSEL_INV_MASK   |	\
+	 P6_EVNTSEL_COUNTER_MASK)
+
+	return event & P6_EVNTSEL_MASK;
+}
+
+
 /*
  * Intel PerfMon v3. Used on Core2 and later.
  */
@@ -726,6 +764,23 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	return 0;
 }
 
+static void p6_pmu_disable_all(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	unsigned long val;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	barrier();
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
 static void intel_pmu_disable_all(void)
 {
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
@@ -767,6 +822,23 @@ void hw_perf_disable(void)
 	return x86_pmu.disable_all();
 }
 
+static void p6_pmu_enable_all(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	unsigned long val;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
 static void intel_pmu_enable_all(void)
 {
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
@@ -819,16 +891,13 @@ static inline void intel_pmu_ack_status(u64 ack)
 
 static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
-	int err;
-	err = checking_wrmsrl(hwc->config_base + idx,
+	(void)checking_wrmsrl(hwc->config_base + idx,
 			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
 }
 
 static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 {
-	int err;
-	err = checking_wrmsrl(hwc->config_base + idx,
-			      hwc->config);
+	(void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
 }
 
 static inline void
@@ -836,13 +905,24 @@ intel_pmu_disable_fixed(struct hw_perf_counter *hwc, int __idx)
 {
 	int idx = __idx - X86_PMC_IDX_FIXED;
 	u64 ctrl_val, mask;
-	int err;
 
 	mask = 0xfULL << (idx * 4);
 
 	rdmsrl(hwc->config_base, ctrl_val);
 	ctrl_val &= ~mask;
-	err = checking_wrmsrl(hwc->config_base, ctrl_val);
+	(void)checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	unsigned long val = ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	if (!cpuc->enabled)
+		val = 0;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }
 
 static inline void
@@ -943,6 +1023,17 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx)
 	err = checking_wrmsrl(hwc->config_base, ctrl_val);
 }
 
+static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	if (cpuc->enabled)
+		x86_pmu_enable_counter(hwc, idx);
+	else
+		x86_pmu_disable_counter(hwc, idx);
+}
+
+
 static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
@@ -1176,6 +1267,49 @@ static void intel_pmu_reset(void)
 	local_irq_restore(flags);
 }
 
+static int p6_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_counters *cpuc;
+	struct perf_counter *counter;
+	struct hw_perf_counter *hwc;
+	int idx, handled = 0;
+	u64 val;
+
+	data.regs = regs;
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		counter = cpuc->counters[idx];
+		hwc = &counter->hw;
+
+		val = x86_perf_counter_update(counter, hwc, idx);
+		if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+			continue;
+
+		/*
+		 * counter overflow
+		 */
+		handled		= 1;
+		data.period	= counter->hw.last_period;
+
+		if (!x86_perf_counter_set_period(counter, hwc, idx))
+			continue;
+
+		if (perf_counter_overflow(counter, 1, &data))
+			p6_pmu_disable_counter(hwc, idx);
+	}
+
+	if (handled)
+		inc_irq_stat(apic_perf_irqs);
+
+	return handled;
+}
 
 /*
  * This handler is triggered by the local APIC, so the APIC IRQ handling
@@ -1185,14 +1319,13 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 {
 	struct perf_sample_data data;
 	struct cpu_hw_counters *cpuc;
-	int bit, cpu, loops;
+	int bit, loops;
 	u64 ack, status;
 
 	data.regs = regs;
 	data.addr = 0;
 
-	cpu = smp_processor_id();
-	cpuc = &per_cpu(cpu_hw_counters, cpu);
+	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	perf_disable();
 	status = intel_pmu_get_status();
@@ -1249,14 +1382,13 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 	struct cpu_hw_counters *cpuc;
 	struct perf_counter *counter;
 	struct hw_perf_counter *hwc;
-	int cpu, idx, handled = 0;
+	int idx, handled = 0;
 	u64 val;
 
 	data.regs = regs;
 	data.addr = 0;
 
-	cpu = smp_processor_id();
-	cpuc = &per_cpu(cpu_hw_counters, cpu);
+	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		if (!test_bit(idx, cpuc->active_mask))
@@ -1353,6 +1485,32 @@ static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
 	.priority		= 1
 };
 
+static struct x86_pmu p6_pmu = {
+	.name			= "p6",
+	.handle_irq		= p6_pmu_handle_irq,
+	.disable_all		= p6_pmu_disable_all,
+	.enable_all		= p6_pmu_enable_all,
+	.enable			= p6_pmu_enable_counter,
+	.disable		= p6_pmu_disable_counter,
+	.eventsel		= MSR_P6_EVNTSEL0,
+	.perfctr		= MSR_P6_PERFCTR0,
+	.event_map		= p6_pmu_event_map,
+	.raw_event		= p6_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
+	.max_period		= (1ULL << 31) - 1,
+	.version		= 0,
+	.num_counters		= 2,
+	/*
+	 * Counters have 40 bits implemented. However they are designed such
+	 * that bits [32-39] are sign extensions of bit 31. As such the
+	 * effective width of a counter for P6-like PMU is 32 bits only.
+	 *
+	 * See IA-32 Intel Architecture Software developer manual Vol 3B
+	 */
+	.counter_bits		= 32,
+	.counter_mask		= (1ULL << 32) - 1,
+};
+
 static struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,
@@ -1392,6 +1550,41 @@ static struct x86_pmu amd_pmu = {
 	.max_period		= (1ULL << 47) - 1,
 };
 
+static int p6_pmu_init(void)
+{
+	int high, low;
+
+	switch (boot_cpu_data.x86_model) {
+	case 1:
+	case 3:  /* Pentium Pro */
+	case 5:
+	case 6:  /* Pentium II */
+	case 7:
+	case 8:
+	case 11: /* Pentium III */
+		break;
+	case 9:
+	case 13:
+		/* for Pentium M, we need to check if PMU exist */
+		rdmsr(MSR_IA32_MISC_ENABLE, low, high);
+		if (low & MSR_IA32_MISC_ENABLE_EMON)
+			break;
+	default:
+		pr_cont("unsupported p6 CPU model %d ",
+			boot_cpu_data.x86_model);
+		return -ENODEV;
+	}
+
+	if (!cpu_has_apic) {
+		pr_info("no Local APIC, try rebooting with lapic");
+		return -ENODEV;
+	}
+
+	x86_pmu				= p6_pmu;
+
+	return 0;
+}
+
 static int intel_pmu_init(void)
 {
 	union cpuid10_edx edx;
@@ -1400,8 +1593,14 @@ static int intel_pmu_init(void)
 	unsigned int ebx;
 	int version;
 
-	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+		/* check for P6 processor family */
+	   if (boot_cpu_data.x86 == 6) {
+		return p6_pmu_init();
+	   } else {
 		return -ENODEV;
+	   }
+	}
 
 	/*
 	 * Check whether the Architectural PerfMon supports
-- 
cgit v1.2.3


From 9c74fb50867e8fb5f3be3be06716492c0f79309e Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 8 Jul 2009 10:21:41 +0200
Subject: perf_counter: Fix up P6 PMU details

The P6 doesn't seem to support cache ref/hit/miss counts, so
we extend the generic hardware event codes to have 0 and -1
mean the same thing as for the generic cache events.

Furthermore, it turns out the 0 event does not count
(that is, its reported that on PPro it actually does count
something), therefore use a event configuration that's
specified not to count to disable the counters.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 1910f39ff19..c7cc6eac14e 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -84,6 +84,14 @@ static u64 p6_pmu_event_map(int event)
 	return p6_perfmon_event_map[event];
 }
 
+/*
+ * Counter setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_COUNTER			0x0000002EULL
+
 static u64 p6_pmu_raw_event(u64 event)
 {
 #define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
@@ -704,6 +712,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 {
 	struct perf_counter_attr *attr = &counter->attr;
 	struct hw_perf_counter *hwc = &counter->hw;
+	u64 config;
 	int err;
 
 	if (!x86_pmu_initialized())
@@ -756,10 +765,19 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 
 	if (attr->config >= x86_pmu.max_events)
 		return -EINVAL;
+
 	/*
 	 * The generic map:
 	 */
-	hwc->config |= x86_pmu.event_map(attr->config);
+	config = x86_pmu.event_map(attr->config);
+
+	if (config == 0)
+		return -ENOENT;
+
+	if (config == -1LL)
+		return -EINVAL;
+
+	hwc->config |= config;
 
 	return 0;
 }
@@ -767,7 +785,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 static void p6_pmu_disable_all(void)
 {
 	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	unsigned long val;
+	u64 val;
 
 	if (!cpuc->enabled)
 		return;
@@ -917,10 +935,10 @@ static inline void
 p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 {
 	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	unsigned long val = ARCH_PERFMON_EVENTSEL0_ENABLE;
+	u64 val = P6_NOP_COUNTER;
 
-	if (!cpuc->enabled)
-		val = 0;
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
 
 	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }
-- 
cgit v1.2.3


From 984b838ce69c063a91b87550598ab7f3439dd94a Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Fri, 10 Jul 2009 09:59:56 +0200
Subject: perf_counter: Clean up global vs counter enable

Ingo noticed that both AMD and P6 call
x86_pmu_disable_counter() on *_pmu_enable_counter(). This is
because we rely on the side effect of that call to program
the event config but not touch the EN bit.

We change that for AMD by having enable_all() simply write
the full config in, and for P6 by explicitly coding it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index c7cc6eac14e..bed1c4c2f25 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -874,13 +874,13 @@ static void amd_pmu_enable_all(void)
 	barrier();
 
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		struct perf_counter *counter = cpuc->counters[idx];
 		u64 val;
 
 		if (!test_bit(idx, cpuc->active_mask))
 			continue;
-		rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
-		if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
-			continue;
+
+		val = counter->hw.config;
 		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
 		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
 	}
@@ -1044,11 +1044,13 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx)
 static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
 	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val;
 
+	val = hwc->config;
 	if (cpuc->enabled)
-		x86_pmu_enable_counter(hwc, idx);
-	else
-		x86_pmu_disable_counter(hwc, idx);
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
 }
 
 
@@ -1068,8 +1070,6 @@ static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 
 	if (cpuc->enabled)
 		x86_pmu_enable_counter(hwc, idx);
-	else
-		x86_pmu_disable_counter(hwc, idx);
 }
 
 static int
-- 
cgit v1.2.3


From 9ff80942992cd5abd0779c815f310f65b7b83860 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Wed, 8 Jul 2009 22:03:53 +0400
Subject: x86: Clean up idt_descr and idt_tableby using NR_VECTORS instead of
 hardcoded number

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090708180353.GH5301@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 2 +-
 arch/x86/kernel/traps.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c07af9..d6f27c92854 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -982,7 +982,7 @@ static __init int setup_disablecpuid(char *arg)
 __setup("clearcpuid=", setup_disablecpuid);
 
 #ifdef CONFIG_X86_64
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
 
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
 		     irq_stack_union) __aligned(PAGE_SIZE);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5204332f475..7e4b1f5dec8 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -76,7 +76,7 @@ char ignore_fpu_irq;
  * F0 0F bug workaround.. We have a special link segment
  * for this.
  */
-gate_desc idt_table[256]
+gate_desc idt_table[NR_VECTORS]
 	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
 #endif
 
-- 
cgit v1.2.3


From a1b4f1a5b7f57be2593a9f1fca465a529c95fc07 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Sun, 5 Jul 2009 20:01:54 +0400
Subject: x86, ipi: Clean up safe_smp_processor_id() by using the
 cpu_has_apic() macro helper

We already use a lot of cpu_has_ helpers.
Lets do here the same for consistency.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090705160154.GB4791@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/ipi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index dbf5445727a..e6b4f517fcf 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -150,7 +150,7 @@ int safe_smp_processor_id(void)
 {
 	int apicid, cpuid;
 
-	if (!boot_cpu_has(X86_FEATURE_APIC))
+	if (!cpu_has_apic)
 		return 0;
 
 	apicid = hard_smp_processor_id();
-- 
cgit v1.2.3


From 8aa7e847d834ed937a9ad37a0f2ad5b8584c1ab0 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Thu, 9 Jul 2009 14:52:32 +0200
Subject: Fix congestion_wait() sync/async vs read/write confusion

Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 arch/x86/lib/usercopy_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 7c8ca91bb9e..1f118d462ac 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -751,7 +751,7 @@ survive:
 
 			if (retval == -ENOMEM && is_global_init(current)) {
 				up_read(&current->mm->mmap_sem);
-				congestion_wait(WRITE, HZ/50);
+				congestion_wait(BLK_RW_ASYNC, HZ/50);
 				goto survive;
 			}
 
-- 
cgit v1.2.3


From 857fdc53a0a90c3ba7fcf5b1fb4c7a62ae03cf82 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Fri, 10 Jul 2009 09:36:20 -0700
Subject: x86/pci: insert ioapic resource before assigning unassigned resources

Stephen reported that his DL585 G2 needed noapic after 2.6.22 (?)

Dann bisected it down to:
  commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029
  Date:   Tue Feb 19 03:21:20 2008 -0800

      x86: multi pci root bus with different io resource range, on
      64-bit

It turns out that:
  1. that AMD-based systems have two HT chains.
  2. BIOS doesn't allocate resources for BAR 6 of devices under 8132 etc
  3. that multi-peer-root patch will try to split root resources to peer
     root resources according to PCI conf of NB
  4. PCI core assigns unassigned resources, but they overlap with BARs
     that are used by ioapic addr of io4 and 8132.

The reason: at that point ioapic address are not inserted yet.  Solution
is to insert ioapic resources into the tree a bit earlier.

Reported-by: Stephen Frost <sfrost@snowman.net>
Reported-and-Tested-by: dann frazier <dannf@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@jbarnes-g45.(none)>
---
 arch/x86/include/asm/io_apic.h |  2 ++
 arch/x86/kernel/apic/io_apic.c | 14 +++-----------
 arch/x86/pci/i386.c            |  7 +++++++
 3 files changed, 12 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index daf866ed061..330ee807f89 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -161,6 +161,7 @@ extern int io_apic_set_pci_routing(struct device *dev, int irq,
 		 struct io_apic_irq_attr *irq_attr);
 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
 extern void ioapic_init_mappings(void);
+extern void ioapic_insert_resources(void);
 
 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
 extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
@@ -180,6 +181,7 @@ extern void ioapic_write_entry(int apic, int pin,
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)	{ }
+static inline void ioapic_insert_resources(void) { }
 
 static inline void probe_nr_irqs_gsi(void)	{ }
 #endif
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 90b5e6efa93..2284a4812b6 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -4181,28 +4181,20 @@ fake_ioapic_page:
 	}
 }
 
-static int __init ioapic_insert_resources(void)
+void __init ioapic_insert_resources(void)
 {
 	int i;
 	struct resource *r = ioapic_resources;
 
 	if (!r) {
-		if (nr_ioapics > 0) {
+		if (nr_ioapics > 0)
 			printk(KERN_ERR
 				"IO APIC resources couldn't be allocated.\n");
-			return -1;
-		}
-		return 0;
+		return;
 	}
 
 	for (i = 0; i < nr_ioapics; i++) {
 		insert_resource(&iomem_resource, r);
 		r++;
 	}
-
-	return 0;
 }
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 0fb56db16d1..52e62e57fed 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -35,6 +35,7 @@
 #include <asm/pat.h>
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
+#include <asm/io_apic.h>
 
 
 static int
@@ -227,6 +228,12 @@ void __init pcibios_resource_survey(void)
 	pcibios_allocate_resources(1);
 
 	e820_reserve_resources_late();
+	/*
+	 * Insert the IO APIC resources after PCI initialization has
+	 * occured to handle IO APICS that are mapped in on a BAR in
+	 * PCI space, but before trying to assign unassigned pci res.
+	 */
+	ioapic_insert_resources();
 }
 
 /**
-- 
cgit v1.2.3


From c99e6efe1ba04561e7d93a81f0be07e37427e835 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Fri, 10 Jul 2009 14:57:56 +0200
Subject: sched: INIT_PREEMPT_COUNT

Pull the initial preempt_count value into a single
definition site.

Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.

The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.

Cc: tony.luck@intel.com
Cc: rth@twiddle.net
Cc: geert@linux-m68k.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/thread_info.h      | 1 +
 arch/arm/include/asm/thread_info.h        | 2 +-
 arch/avr32/include/asm/thread_info.h      | 2 +-
 arch/blackfin/include/asm/thread_info.h   | 2 +-
 arch/cris/include/asm/thread_info.h       | 4 +---
 arch/frv/include/asm/thread_info.h        | 4 +---
 arch/h8300/include/asm/thread_info.h      | 2 +-
 arch/ia64/include/asm/thread_info.h       | 2 +-
 arch/m32r/include/asm/thread_info.h       | 4 +---
 arch/m68k/include/asm/thread_info_mm.h    | 1 +
 arch/m68k/include/asm/thread_info_no.h    | 1 +
 arch/microblaze/include/asm/thread_info.h | 4 +---
 arch/mips/include/asm/thread_info.h       | 4 +---
 arch/mn10300/include/asm/thread_info.h    | 4 +---
 arch/parisc/include/asm/thread_info.h     | 2 +-
 arch/powerpc/include/asm/thread_info.h    | 4 +---
 arch/s390/include/asm/thread_info.h       | 2 +-
 arch/sh/include/asm/thread_info.h         | 2 +-
 arch/sparc/include/asm/thread_info_32.h   | 4 +---
 arch/sparc/include/asm/thread_info_64.h   | 4 +---
 arch/um/include/asm/thread_info.h         | 2 +-
 arch/x86/include/asm/thread_info.h        | 2 +-
 arch/xtensa/include/asm/thread_info.h     | 4 +---
 23 files changed, 23 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index d069526bd76..60c83abfde7 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -37,6 +37,7 @@ struct thread_info {
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
 	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 4f8848260ee..73394e50cbc 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -73,7 +73,7 @@ struct thread_info {
 	.task		= &tsk,						\
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
 	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index 4442f8d2d42..fc42de5ca20 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -40,7 +40,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
 	.cpu		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.restart_block	= {						\
 		.fn	= do_no_restart_syscall				\
 	}								\
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index 2920087516f..2bbfdd950af 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -77,7 +77,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count  = 1,                    \
+	.preempt_count  = INIT_PREEMPT_COUNT,   \
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/cris/include/asm/thread_info.h b/arch/cris/include/asm/thread_info.h
index bc5b2935ca5..c3aade36c33 100644
--- a/arch/cris/include/asm/thread_info.h
+++ b/arch/cris/include/asm/thread_info.h
@@ -50,8 +50,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 #define INIT_THREAD_INFO(tsk)				\
@@ -60,7 +58,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,		\
 	.flags		= 0,				\
 	.cpu		= 0,				\
-	.preempt_count	= 1,				\
+	.preempt_count	= INIT_PREEMPT_COUNT,		\
 	.addr_limit	= KERNEL_DS,			\
 	.restart_block = {				\
 		       .fn = do_no_restart_syscall,	\
diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h
index e8a5ed7be02..e608e056bb5 100644
--- a/arch/frv/include/asm/thread_info.h
+++ b/arch/frv/include/asm/thread_info.h
@@ -56,8 +56,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -67,7 +65,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 700014d2155..8bbc8b0ee45 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -36,7 +36,7 @@ struct thread_info {
 	.exec_domain =	&default_exec_domain,	\
 	.flags =	0,			\
 	.cpu =		0,			\
-	.preempt_count = 1,			\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index ae6922626bf..8ce2e388e37 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -48,7 +48,7 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 8589d462df2..07bb5bd00e2 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -57,8 +57,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -68,7 +66,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index af0fda46e94..6ea5c33b3c5 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -19,6 +19,7 @@ struct thread_info {
 {						\
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index 82529f424ea..c2bde5e24b0 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -49,6 +49,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 7fac4449844..6e92885d381 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -75,8 +75,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -84,7 +82,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 143a48136a4..f9df720d2e4 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -39,8 +39,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -48,7 +46,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= _TIF_FIXADE,		\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
index 78a3881f3c1..58d64f8b2cc 100644
--- a/arch/mn10300/include/asm/thread_info.h
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -65,8 +65,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -76,7 +74,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 0407959da48..4ce0edfbe96 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -23,7 +23,7 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.addr_limit	= KERNEL_DS,		\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
   	.restart_block	= {			\
 		.fn = do_no_restart_syscall	\
 	}					\
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 9aba5a38a7c..c8b32925567 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -46,15 +46,13 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task =		&tsk,			\
 	.exec_domain =	&default_exec_domain,	\
 	.cpu =		0,			\
-	.preempt_count = 1,			\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 925bcc64903..ba1cab9fc1f 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -61,7 +61,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
 	},					\
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index f09ac480629..d570ac2e5cb 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -51,7 +51,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block	= {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
index 0f7b0e5fb1c..844d73a0340 100644
--- a/arch/sparc/include/asm/thread_info_32.h
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -54,8 +54,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #define INIT_THREAD_INFO(tsk)				\
 {							\
@@ -64,7 +62,7 @@ struct thread_info {
 	.exec_domain	=	&default_exec_domain,	\
 	.flags		=	0,			\
 	.cpu		=	0,			\
-	.preempt_count	=	1,			\
+	.preempt_count	=	INIT_PREEMPT_COUNT,	\
 	.restart_block	= {				\
 		.fn	=	do_no_restart_syscall,	\
 	},						\
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 65865726b28..1b45a7bbe40 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -125,8 +125,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 #ifndef __ASSEMBLY__
 
@@ -135,7 +133,7 @@ struct thread_info {
 	.task		=	&tsk,			\
 	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
 	.exec_domain	=	&default_exec_domain,	\
-	.preempt_count	=	1,			\
+	.preempt_count	=	INIT_PREEMPT_COUNT,	\
 	.restart_block	= {				\
 		.fn	=	do_no_restart_syscall,	\
 	},						\
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 62274ab9471..fd911f85536 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -32,7 +32,7 @@ struct thread_info {
 	.exec_domain =	&default_exec_domain,	\
 	.flags =		0,		\
 	.cpu =		0,			\
-	.preempt_count =	1,		\
+	.preempt_count = INIT_PREEMPT_COUNT,	\
 	.addr_limit =	KERNEL_DS,		\
 	.restart_block =  {			\
 		.fn =  do_no_restart_syscall,	\
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index b0783520988..fad7d40b75f 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 0f4fe1faf9b..13165641cc5 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -80,8 +80,6 @@ struct thread_info {
 
 /*
  * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
  */
 
 #ifndef __ASSEMBLY__
@@ -92,7 +90,7 @@ struct thread_info {
 	.exec_domain	= &default_exec_domain,	\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.preempt_count	= 1,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.addr_limit	= KERNEL_DS,		\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
-- 
cgit v1.2.3


From b99610fb9cdf390965c62c22322596d961591160 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 11 Jul 2009 01:00:23 +0000
Subject: sh: Provide diagnostic kernel stack checks

Enable kernel stack checking code in both the dynamic ftrace and mcount
code paths. Check the stack to see if it's overflowing and make sure
that the stack pointer contains an address that's either in init_stack
or after the bss.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug        | 11 ++++++
 arch/sh/kernel/asm-offsets.c |  1 +
 arch/sh/lib/mcount.S         | 85 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 97 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 39224b57c6e..52a132c24aa 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -123,4 +123,15 @@ config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
 	depends on SUPERH64
 
+config STACK_DEBUG
+	bool "Enable diagnostic checks of the kernel stack"
+	depends on FUNCTION_TRACER
+	select DEBUG_STACKOVERFLOW
+	default n
+	help
+	  This option allows checks to be performed on the kernel stack
+	  at runtime. Saying Y here will add overhead to every function
+	  call and will therefore incur a major performance hit. Most
+	  users should say N.
+
 endmenu
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
index 99aceb28ee2..d218e808294 100644
--- a/arch/sh/kernel/asm-offsets.c
+++ b/arch/sh/kernel/asm-offsets.c
@@ -26,6 +26,7 @@ int main(void)
 	DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
 	DEFINE(TI_PRE_COUNT,	offsetof(struct thread_info, preempt_count));
 	DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block));
+	DEFINE(TI_SIZE,		sizeof(struct thread_info));
 
 #ifdef CONFIG_HIBERNATION
 	DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index 71e87f9b4fd..8596483f7b4 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -9,6 +9,8 @@
  * for more details.
  */
 #include <asm/ftrace.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
 
 #define MCOUNT_ENTER()		\
 	mov.l	r4, @-r15;	\
@@ -28,6 +30,55 @@
 	rts;			\
 	 mov.l	@r15+, r4
 
+#ifdef CONFIG_STACK_DEBUG
+/*
+ * Perform diagnostic checks on the state of the kernel stack.
+ *
+ * Check for stack overflow. If there is less than 1KB free
+ * then it has overflowed.
+ *
+ * Make sure the stack pointer contains a valid address. Valid
+ * addresses for kernel stacks are anywhere after the bss
+ * (after _ebss) and anywhere in init_thread_union (init_stack).
+ */
+#define STACK_CHECK()					\
+	mov	#(THREAD_SIZE >> 10), r0;		\
+	shll8	r0;					\
+	shll2	r0;					\
+							\
+	/* r1 = sp & (THREAD_SIZE - 1) */		\
+	mov	#-1, r1;				\
+	add	r0, r1;					\
+	and	r15, r1;				\
+							\
+	mov	#TI_SIZE, r3;				\
+	mov	#(STACK_WARN >> 8), r2;			\
+	shll8	r2;					\
+	add	r3, r2;					\
+							\
+	/* Is the stack overflowing? */			\
+	cmp/hi	r2, r1;					\
+	bf	stack_panic;				\
+							\
+	/* If sp > _ebss then we're OK. */		\
+	mov.l	.L_ebss, r1;				\
+	cmp/hi	r1, r15;				\
+	bt	1f;					\
+							\
+	/* If sp < init_stack, we're not OK. */		\
+	mov.l	.L_init_thread_union, r1;		\
+	cmp/hs	r1, r15;				\
+	bf	stack_panic;				\
+							\
+	/* If sp > init_stack && sp < _ebss, not OK. */	\
+	add	r0, r1;					\
+	cmp/hs	r1, r15;				\
+	bt	stack_panic;				\
+1:
+#else
+#define STACK_CHECK()
+#endif /* CONFIG_STACK_DEBUG */
+
 	.align 2
 	.globl	_mcount
 	.type	_mcount,@function
@@ -41,6 +92,8 @@ mcount:
 	tst	r0, r0
 	bf	ftrace_stub
 #endif
+	STACK_CHECK()
+
 	MCOUNT_ENTER()
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -73,6 +126,8 @@ ftrace_caller:
 	tst	r0, r0
 	bf	ftrace_stub
 
+	STACK_CHECK()
+
 	MCOUNT_ENTER()
 
 	.globl ftrace_call
@@ -100,6 +155,36 @@ ftrace_stub:
 	rts
 	 nop
 
+#ifdef CONFIG_STACK_DEBUG
+	.globl	stack_panic
+stack_panic:
+	mov.l	.Ldump_stack, r0
+	jsr	@r0
+	 nop
+
+	mov.l	.Lpanic, r0
+	jsr	@r0
+	 mov.l	.Lpanic_s, r4
+
+	rts
+	 nop
+
 	.align 2
 .Lfunction_trace_stop:
 	.long	function_trace_stop
+.L_ebss:
+	.long	_ebss
+.L_init_thread_union:
+	.long	init_thread_union
+.Lpanic:
+	.long	panic
+.Lpanic_s:
+	.long	.Lpanic_str
+.Ldump_stack:
+	.long	dump_stack
+
+	.section	.rodata
+	.align 2
+.Lpanic_str:
+	.string "Stack error"
+#endif /* CONFIG_STACK_DEBUG */
-- 
cgit v1.2.3


From 327933f5d6cdf083284d3c06e0370d1de464aef4 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 11 Jul 2009 00:29:03 +0000
Subject: sh: Function graph tracer support

Add both dynamic and static function graph tracer support for sh.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                 |   1 +
 arch/sh/include/asm/ftrace.h    |   3 +
 arch/sh/kernel/Makefile_32      |   1 +
 arch/sh/kernel/ftrace.c         | 122 ++++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/vmlinux_64.lds.S |   0
 arch/sh/lib/Makefile            |   1 +
 arch/sh/lib/mcount.S            | 117 +++++++++++++++++++++++++++++++++++++-
 7 files changed, 244 insertions(+), 1 deletion(-)
 create mode 100644 arch/sh/kernel/vmlinux_64.lds.S

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 29e41ec6537..6d110a4f7f6 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -33,6 +33,7 @@ config SUPERH32
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FTRACE_SYSCALLS
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_ARCH_KGDB
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
index b09311ad1db..7e0bcc4d4a9 100644
--- a/arch/sh/include/asm/ftrace.h
+++ b/arch/sh/include/asm/ftrace.h
@@ -13,8 +13,11 @@ extern void mcount(void);
 #ifdef CONFIG_DYNAMIC_FTRACE
 #define CALL_ADDR		((long)(ftrace_call))
 #define STUB_ADDR		((long)(ftrace_stub))
+#define GRAPH_ADDR		((long)(ftrace_graph_call))
+#define CALLER_ADDR		((long)(ftrace_caller))
 
 #define MCOUNT_INSN_OFFSET	((STUB_ADDR - CALL_ADDR) - 4)
+#define GRAPH_INSN_OFFSET	((CALLER_ADDR - GRAPH_ADDR) - 4)
 
 struct dyn_arch_ftrace {
 	/* No extra data needed on sh */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index fee924a9c46..94ed99b6800 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -30,6 +30,7 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 4f62eced0ae..6647dfcb781 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -16,11 +16,13 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/kernel.h>
 #include <asm/ftrace.h>
 #include <asm/cacheflush.h>
 #include <asm/unistd.h>
 #include <trace/syscall.h>
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 static unsigned char ftrace_replaced_code[MCOUNT_INSN_SIZE];
 
 static unsigned char ftrace_nop[4];
@@ -133,6 +135,126 @@ int __init ftrace_dyn_arch_init(void *data)
 
 	return 0;
 }
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
+
+static int ftrace_mod(unsigned long ip, unsigned long old_addr,
+		      unsigned long new_addr)
+{
+	unsigned char code[MCOUNT_INSN_SIZE];
+
+	if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	if (old_addr != __raw_readl((unsigned long *)code))
+		return -EINVAL;
+
+	__raw_writel(new_addr, ip);
+	return 0;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned long ip, old_addr, new_addr;
+
+	ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
+	old_addr = (unsigned long)(&skip_trace);
+	new_addr = (unsigned long)(&ftrace_graph_caller);
+
+	return ftrace_mod(ip, old_addr, new_addr);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	unsigned long ip, old_addr, new_addr;
+
+	ip = (unsigned long)(&ftrace_graph_call) + GRAPH_INSN_OFFSET;
+	old_addr = (unsigned long)(&ftrace_graph_caller);
+	new_addr = (unsigned long)(&skip_trace);
+
+	return ftrace_mod(ip, old_addr, new_addr);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in the current thread info.
+ *
+ * This is the main routine for the function graph tracer. The function
+ * graph tracer essentially works like this:
+ *
+ * parent is the stack address containing self_addr's return address.
+ * We pull the real return address out of parent and store it in
+ * current's ret_stack. Then, we replace the return address on the stack
+ * with the address of return_to_handler. self_addr is the function that
+ * called mcount.
+ *
+ * When self_addr returns, it will jump to return_to_handler which calls
+ * ftrace_return_to_handler. ftrace_return_to_handler will pull the real
+ * return address off of current's ret_stack and jump to it.
+ */
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+{
+	unsigned long old;
+	int faulted, err;
+	struct ftrace_graph_ent trace;
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * Protect against fault, even if it shouldn't
+	 * happen. This tool is too much intrusive to
+	 * ignore such a protection.
+	 */
+	__asm__ __volatile__(
+		"1:						\n\t"
+		"mov.l		@%2, %0				\n\t"
+		"2:						\n\t"
+		"mov.l		%3, @%2				\n\t"
+		"mov		#0, %1				\n\t"
+		"3:						\n\t"
+		".section .fixup, \"ax\"			\n\t"
+		"4:						\n\t"
+		"mov.l		5f, %0				\n\t"
+		"jmp		@%0				\n\t"
+		" mov		#1, %1				\n\t"
+		".balign 4					\n\t"
+		"5:	.long 3b				\n\t"
+		".previous					\n\t"
+		".section __ex_table,\"a\"			\n\t"
+		".long 1b, 4b					\n\t"
+		".long 2b, 4b					\n\t"
+		".previous					\n\t"
+		: "=&r" (old), "=r" (faulted)
+		: "r" (parent), "r" (return_hooker)
+	);
+
+	if (unlikely(faulted)) {
+		ftrace_graph_stop();
+		WARN_ON(1);
+		return;
+	}
+
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0);
+	if (err == -EBUSY) {
+		__raw_writel(old, parent);
+		return;
+	}
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		__raw_writel(old, parent);
+	}
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
 #ifdef CONFIG_FTRACE_SYSCALLS
 
diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index aaea580b65b..19328d90a2d 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -25,6 +25,7 @@ memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
 lib-$(CONFIG_MMU)		+= copy_page.o clear_page.o
 lib-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
+lib-$(CONFIG_FUNCTION_GRAPH_TRACER) += mcount.o
 lib-y				+= $(memcpy-y) $(udivsi3-y)
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index 8596483f7b4..bd3ec648bec 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -111,14 +111,62 @@ mcount_call:
 	jsr	@r6
 	 nop
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	mov.l   .Lftrace_graph_return, r6
+	mov.l   .Lftrace_stub, r7
+	cmp/eq  r6, r7
+	bt      1f
+
+	mov.l   .Lftrace_graph_caller, r0
+	jmp     @r0
+	 nop
+
+1:
+	mov.l	.Lftrace_graph_entry, r6
+	mov.l	.Lftrace_graph_entry_stub, r7
+	cmp/eq	r6, r7
+	bt	skip_trace
+
+	mov.l   .Lftrace_graph_caller, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+.Lftrace_graph_return:
+	.long   ftrace_graph_return
+.Lftrace_graph_entry:
+	.long   ftrace_graph_entry
+.Lftrace_graph_entry_stub:
+	.long   ftrace_graph_entry_stub
+.Lftrace_graph_caller:
+	.long   ftrace_graph_caller
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+	.globl skip_trace
 skip_trace:
 	MCOUNT_LEAVE()
 
 	.align 2
 .Lftrace_trace_function:
-	.long	ftrace_trace_function
+	.long   ftrace_trace_function
 
 #ifdef CONFIG_DYNAMIC_FTRACE
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * NOTE: Do not move either ftrace_graph_call or ftrace_caller
+ * as this will affect the calculation of GRAPH_INSN_OFFSET.
+ */
+	.globl ftrace_graph_call
+ftrace_graph_call:
+	mov.l	.Lskip_trace, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+.Lskip_trace:
+	.long	skip_trace
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
 	.globl ftrace_caller
 ftrace_caller:
 	mov.l	.Lfunction_trace_stop, r0
@@ -136,7 +184,12 @@ ftrace_call:
 	jsr	@r6
 	 nop
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	bra	ftrace_graph_call
+	 nop
+#else
 	MCOUNT_LEAVE()
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 /*
@@ -188,3 +241,65 @@ stack_panic:
 .Lpanic_str:
 	.string "Stack error"
 #endif /* CONFIG_STACK_DEBUG */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	mov.l	2f, r0
+	mov.l	@r0, r0
+	tst	r0, r0
+	bt	1f
+
+	mov.l	3f, r1
+	jmp	@r1
+	 nop
+1:
+	/*
+	 * MCOUNT_ENTER() pushed 5 registers onto the stack, so
+	 * the stack address containing our return address is
+	 * r15 + 20.
+	 */
+	mov	#20, r0
+	add	r15, r0
+	mov	r0, r4
+
+	mov.l	.Lprepare_ftrace_return, r0
+	jsr	@r0
+	 nop
+
+	MCOUNT_LEAVE()
+
+	.align 2
+2:	.long	function_trace_stop
+3:	.long	skip_trace
+.Lprepare_ftrace_return:
+	.long	prepare_ftrace_return
+
+	.globl	return_to_handler
+return_to_handler:
+	/*
+	 * Save the return values.
+	 */
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+
+	mov	#0, r4
+
+	mov.l	.Lftrace_return_to_handler, r0
+	jsr	@r0
+	 nop
+
+	/*
+	 * The return value from ftrace_return_handler has the real
+	 * address that we should return to.
+	 */
+	lds	r0, pr
+	mov.l	@r15+, r1
+	rts
+	 mov.l	@r15+, r0
+
+
+	.align 2
+.Lftrace_return_to_handler:
+	.long	ftrace_return_to_handler
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-- 
cgit v1.2.3


From 7816fecd03e480ed0b47d674ed772ca0b45e1b5e Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 11 Jul 2009 00:29:04 +0000
Subject: sh: Mark __switch_to() as __notrace_funcgraph

Annotate __switch_to() so that the function graph tracer does not try to
trace it. Use __notrace_funcgraph, as opposed to notrace, so that other
tracers can continue to trace __switch_to().

The reason that we don't want to trace __switch_to() with the function
graph tracer is because of how the return address stack in task_struct
is implemented. When we enter __switch_to we store the real return
address on prev's ret_stack. When we return from __switch_to() we've
patched the return address on the kernel stack to be
return_to_handler. Calling return_to_handler we do,

       -> ftrace_return_to_handler()
       	  -> ftrace_pop_return_ftrace()

Which tries to pop the real return address from current->ret_stack. The
problem being that we stored the return address on prev->ret_stack, but
current now points to next, and next->ret_stack doesn't contain the
correct return address (and is possibly even empty).

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/process_32.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 92d7740faab..9fee977f176 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -23,6 +23,7 @@
 #include <linux/tick.h>
 #include <linux/reboot.h>
 #include <linux/fs.h>
+#include <linux/ftrace.h>
 #include <linux/preempt.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
@@ -264,8 +265,8 @@ static void ubc_set_tracing(int asid, unsigned long pc)
  *	switch_to(x,y) should switch tasks from x to y.
  *
  */
-struct task_struct *__switch_to(struct task_struct *prev,
-				struct task_struct *next)
+__notrace_funcgraph struct task_struct *
+__switch_to(struct task_struct *prev, struct task_struct *next)
 {
 #if defined(CONFIG_SH_FPU)
 	unlazy_fpu(prev, task_pt_regs(prev));
-- 
cgit v1.2.3


From a1a08d1cb0ab148fd74216e4c0b4d4db18fe62c6 Mon Sep 17 00:00:00 2001
From: Roland Dreier <roland@digitalvampire.org>
Date: Sat, 11 Jul 2009 00:10:04 -0700
Subject: x86: Remove spurious printk level from segfault message

Since commit 5fd29d6c ("printk: clean up handling of log-levels
and newlines"), the kernel logs segfaults like:

    <6>gnome-power-man[24509]: segfault at 20 ip 00007f9d4950465a sp 00007fffbb50fc70 error 4 in libgobject-2.0.so.0.2103.0[7f9d494f7000+45000]

with the extra "<6>" being KERN_INFO.  This happens because the
printk in show_signal_msg() started with KERN_CONT and then
used "%s" to pass in the real level; and KERN_CONT is no longer
an empty string, and printk only pays attention to the level at
the very beginning of the format string.

Therefore, remove the KERN_CONT from this printk, since it is
now actively causing problems (and never really made any
sense).

Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <874otjitkj.fsf@shaolin.home.digitalvampire.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 85307cc6e45..bfae139182f 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -697,7 +697,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
 	if (!printk_ratelimit())
 		return;
 
-	printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+	printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
 		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 		tsk->comm, task_pid_nr(tsk), address,
 		(void *)regs->ip, (void *)regs->sp, error_code);
-- 
cgit v1.2.3


From e90476d3bab4322070c0afb3e3b55671de8664ea Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:32:46 +0800
Subject: x86: Remove duplicated #include

Remove duplicated #include in:

  arch/x86/kernel/dumpstack.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/dumpstack.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c8405718a4c..2d8a371d433 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -15,7 +15,6 @@
 #include <linux/bug.h>
 #include <linux/nmi.h>
 #include <linux/sysfs.h>
-#include <linux/ftrace.h>
 
 #include <asm/stacktrace.h>
 
-- 
cgit v1.2.3


From 8bdbd962ecfcbdd96f9dbb02d780b4553afd2543 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Sat, 4 Jul 2009 00:35:45 +0100
Subject: x86/cpu: Clean up various files a bit

No code changes except printk levels (although some of the K6
mtrr code might be clearer if there were a few as would
splitting out some of the intel cache code).

Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/amd.c              |  37 ++++++-----
 arch/x86/kernel/cpu/bugs.c             |  10 +--
 arch/x86/kernel/cpu/bugs_64.c          |   2 +-
 arch/x86/kernel/cpu/common.c           |   8 +--
 arch/x86/kernel/cpu/cyrix.c            |  19 ++++--
 arch/x86/kernel/cpu/hypervisor.c       |   5 +-
 arch/x86/kernel/cpu/intel.c            |  11 ++--
 arch/x86/kernel/cpu/intel_cacheinfo.c  | 116 +++++++++++++++++----------------
 arch/x86/kernel/cpu/perfctr-watchdog.c |  45 ++++++-------
 arch/x86/kernel/cpu/proc.c             |   2 +-
 arch/x86/kernel/cpu/vmware.c           |  18 ++---
 11 files changed, 144 insertions(+), 129 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 28e5f595604..c6eb02e6987 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -2,7 +2,7 @@
 #include <linux/bitops.h>
 #include <linux/mm.h>
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/processor.h>
 #include <asm/apic.h>
 #include <asm/cpu.h>
@@ -45,8 +45,8 @@ static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
 #define CBAR_ENB	(0x80000000)
 #define CBAR_KEY	(0X000000CB)
 	if (c->x86_model == 9 || c->x86_model == 10) {
-		if (inl (CBAR) & CBAR_ENB)
-			outl (0 | CBAR_KEY, CBAR);
+		if (inl(CBAR) & CBAR_ENB)
+			outl(0 | CBAR_KEY, CBAR);
 	}
 }
 
@@ -87,9 +87,10 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 		d = d2-d;
 
 		if (d > 20*K6_BUG_LOOP)
-			printk("system stability may be impaired when more than 32 MB are used.\n");
+			printk(KERN_CONT
+				"system stability may be impaired when more than 32 MB are used.\n");
 		else
-			printk("probably OK (after B9730xxxx).\n");
+			printk(KERN_CONT "probably OK (after B9730xxxx).\n");
 		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
 	}
 
@@ -219,8 +220,9 @@ static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
 	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
 		rdmsr(MSR_K7_CLK_CTL, l, h);
 		if ((l & 0xfff00000) != 0x20000000) {
-			printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
-				((l & 0x000fffff)|0x20000000));
+			printk(KERN_INFO
+			    "CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
+					l, ((l & 0x000fffff)|0x20000000));
 			wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
 		}
 	}
@@ -398,7 +400,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		u32 level;
 
 		level = cpuid_eax(1);
-		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+		if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
 			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
@@ -487,27 +489,30 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		 * benefit in doing so.
 		 */
 		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
-		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
-		    if ((tseg>>PMD_SHIFT) <
+			printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+			if ((tseg>>PMD_SHIFT) <
 				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
-			((tseg>>PMD_SHIFT) <
+				((tseg>>PMD_SHIFT) <
 				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
-			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
-			set_memory_4k((unsigned long)__va(tseg), 1);
+				(tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+				set_memory_4k((unsigned long)__va(tseg), 1);
 		}
 	}
 #endif
 }
 
 #ifdef CONFIG_X86_32
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
+static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c,
+							unsigned int size)
 {
 	/* AMD errata T13 (order #21922) */
 	if ((c->x86 == 6)) {
-		if (c->x86_model == 3 && c->x86_mask == 0)	/* Duron Rev A0 */
+		/* Duron Rev A0 */
+		if (c->x86_model == 3 && c->x86_mask == 0)
 			size = 64;
+		/* Tbird rev A1/A2 */
 		if (c->x86_model == 4 &&
-		    (c->x86_mask == 0 || c->x86_mask == 1))	/* Tbird rev A1/A2 */
+			(c->x86_mask == 0 || c->x86_mask == 1))
 			size = 256;
 	}
 	return size;
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index c8e315f1aa8..01a26521239 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -81,7 +81,7 @@ static void __init check_fpu(void)
 
 	boot_cpu_data.fdiv_bug = fdiv_bug;
 	if (boot_cpu_data.fdiv_bug)
-		printk("Hmm, FPU with FDIV bug.\n");
+		printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n");
 }
 
 static void __init check_hlt(void)
@@ -98,7 +98,7 @@ static void __init check_hlt(void)
 	halt();
 	halt();
 	halt();
-	printk("OK.\n");
+	printk(KERN_CONT "OK.\n");
 }
 
 /*
@@ -122,9 +122,9 @@ static void __init check_popad(void)
 	 * CPU hard. Too bad.
 	 */
 	if (res != 12345678)
-		printk("Buggy.\n");
+		printk(KERN_CONT "Buggy.\n");
 	else
-		printk("OK.\n");
+		printk(KERN_CONT "OK.\n");
 #endif
 }
 
@@ -156,7 +156,7 @@ void __init check_bugs(void)
 {
 	identify_boot_cpu();
 #ifndef CONFIG_SMP
-	printk("CPU: ");
+	printk(KERN_INFO "CPU: ");
 	print_cpu_info(&boot_cpu_data);
 #endif
 	check_config();
diff --git a/arch/x86/kernel/cpu/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c
index 9a3ed0649d4..04f0fe5af83 100644
--- a/arch/x86/kernel/cpu/bugs_64.c
+++ b/arch/x86/kernel/cpu/bugs_64.c
@@ -15,7 +15,7 @@ void __init check_bugs(void)
 {
 	identify_boot_cpu();
 #if !defined(CONFIG_SMP)
-	printk("CPU: ");
+	printk(KERN_INFO "CPU: ");
 	print_cpu_info(&boot_cpu_data);
 #endif
 	alternative_instructions();
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d6f27c92854..c96ea44928b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -18,8 +18,8 @@
 #include <asm/hypervisor.h>
 #include <asm/processor.h>
 #include <asm/sections.h>
-#include <asm/topology.h>
-#include <asm/cpumask.h>
+#include <linux/topology.h>
+#include <linux/cpumask.h>
 #include <asm/pgtable.h>
 #include <asm/atomic.h>
 #include <asm/proto.h>
@@ -28,13 +28,13 @@
 #include <asm/desc.h>
 #include <asm/i387.h>
 #include <asm/mtrr.h>
-#include <asm/numa.h>
+#include <linux/numa.h>
 #include <asm/asm.h>
 #include <asm/cpu.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/pat.h>
-#include <asm/smp.h>
+#include <linux/smp.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 593171e967e..19807b89f05 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -3,10 +3,10 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <asm/dma.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/processor-cyrix.h>
 #include <asm/processor-flags.h>
-#include <asm/timer.h>
+#include <linux/timer.h>
 #include <asm/pci-direct.h>
 #include <asm/tsc.h>
 
@@ -282,7 +282,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		 *  The 5510/5520 companion chips have a funky PIT.
 		 */
 		if (vendor == PCI_VENDOR_ID_CYRIX &&
-	 (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
+			(device == PCI_DEVICE_ID_CYRIX_5510 ||
+					device == PCI_DEVICE_ID_CYRIX_5520))
 			mark_tsc_unstable("cyrix 5510/5520 detected");
 	}
 #endif
@@ -299,7 +300,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 			 *  ?  : 0x7x
 			 * GX1 : 0x8x          GX1  datasheet 56
 			 */
-			if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
+			if ((0x30 <= dir1 && dir1 <= 0x6f) ||
+					(0x80 <= dir1 && dir1 <= 0x8f))
 				geode_configure();
 			return;
 		} else { /* MediaGX */
@@ -427,9 +429,12 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
 			local_irq_save(flags);
 			ccr3 = getCx86(CX86_CCR3);
-			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);       /* enable MAPEN  */
-			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);  /* enable cpuid  */
-			setCx86(CX86_CCR3, ccr3);                       /* disable MAPEN */
+			/* enable MAPEN  */
+			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+			/* enable cpuid  */
+			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
+			/* disable MAPEN */
+			setCx86(CX86_CCR3, ccr3);
 			local_irq_restore(flags);
 		}
 	}
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index fb5b86af0b0..93ba8eeb100 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -28,11 +28,10 @@
 static inline void __cpuinit
 detect_hypervisor_vendor(struct cpuinfo_x86 *c)
 {
-	if (vmware_platform()) {
+	if (vmware_platform())
 		c->x86_hyper_vendor = X86_HYPER_VENDOR_VMWARE;
-	} else {
+	else
 		c->x86_hyper_vendor = X86_HYPER_VENDOR_NONE;
-	}
 }
 
 unsigned long get_hypervisor_tsc_freq(void)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 3260ab04499..80a722a071b 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -7,17 +7,17 @@
 #include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>
+#include <linux/uaccess.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
 #include <asm/msr.h>
-#include <asm/uaccess.h>
 #include <asm/ds.h>
 #include <asm/bugs.h>
 #include <asm/cpu.h>
 
 #ifdef CONFIG_X86_64
-#include <asm/topology.h>
+#include <linux/topology.h>
 #include <asm/numa_64.h>
 #endif
 
@@ -174,7 +174,8 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_F00F_BUG
 	/*
 	 * All current models of Pentium and Pentium with MMX technology CPUs
-	 * have the F0 0F bug, which lets nonprivileged users lock up the system.
+	 * have the F0 0F bug, which lets nonprivileged users lock up the
+	 * system.
 	 * Note that the workaround only should be initialized once...
 	 */
 	c->f00f_bug = 0;
@@ -207,7 +208,7 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 			printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
 			printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
 			lo |= MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE;
-			wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+			wrmsr(MSR_IA32_MISC_ENABLE, lo, hi);
 		}
 	}
 
@@ -283,7 +284,7 @@ static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
 	/* Intel has a non-standard dependency on %ecx for this CPUID level. */
 	cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
 	if (eax & 0x1f)
-		return ((eax >> 26) + 1);
+		return (eax >> 26) + 1;
 	else
 		return 1;
 }
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 789efe217e1..306bf0dca06 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -3,7 +3,7 @@
  *
  *	Changes:
  *	Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
- *		Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
+ *	Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
  *	Andi Kleen / Andreas Herrmann	: CPUID4 emulation on AMD.
  */
 
@@ -16,7 +16,7 @@
 #include <linux/pci.h>
 
 #include <asm/processor.h>
-#include <asm/smp.h>
+#include <linux/smp.h>
 #include <asm/k8.h>
 
 #define LVL_1_INST	1
@@ -25,14 +25,15 @@
 #define LVL_3		4
 #define LVL_TRACE	5
 
-struct _cache_table
-{
+struct _cache_table {
 	unsigned char descriptor;
 	char cache_type;
 	short size;
 };
 
-/* all the cache descriptor types we care about (no TLB or trace cache entries) */
+/* All the cache descriptor types we care about (no TLB or
+   trace cache entries) */
+
 static const struct _cache_table __cpuinitconst cache_table[] =
 {
 	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
@@ -105,8 +106,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 };
 
 
-enum _cache_type
-{
+enum _cache_type {
 	CACHE_TYPE_NULL	= 0,
 	CACHE_TYPE_DATA = 1,
 	CACHE_TYPE_INST = 2,
@@ -170,31 +170,31 @@ unsigned short			num_cache_leaves;
    Maybe later */
 union l1_cache {
 	struct {
-		unsigned line_size : 8;
-		unsigned lines_per_tag : 8;
-		unsigned assoc : 8;
-		unsigned size_in_kb : 8;
+		unsigned line_size:8;
+		unsigned lines_per_tag:8;
+		unsigned assoc:8;
+		unsigned size_in_kb:8;
 	};
 	unsigned val;
 };
 
 union l2_cache {
 	struct {
-		unsigned line_size : 8;
-		unsigned lines_per_tag : 4;
-		unsigned assoc : 4;
-		unsigned size_in_kb : 16;
+		unsigned line_size:8;
+		unsigned lines_per_tag:4;
+		unsigned assoc:4;
+		unsigned size_in_kb:16;
 	};
 	unsigned val;
 };
 
 union l3_cache {
 	struct {
-		unsigned line_size : 8;
-		unsigned lines_per_tag : 4;
-		unsigned assoc : 4;
-		unsigned res : 2;
-		unsigned size_encoded : 14;
+		unsigned line_size:8;
+		unsigned lines_per_tag:4;
+		unsigned assoc:4;
+		unsigned res:2;
+		unsigned size_encoded:14;
 	};
 	unsigned val;
 };
@@ -350,7 +350,8 @@ static int __cpuinit find_num_cache_leaves(void)
 
 unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 {
-	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+	/* Cache sizes */
+	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0;
 	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
 	unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
 	unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb;
@@ -377,8 +378,8 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 
 			retval = cpuid4_cache_lookup_regs(i, &this_leaf);
 			if (retval >= 0) {
-				switch(this_leaf.eax.split.level) {
-				    case 1:
+				switch (this_leaf.eax.split.level) {
+				case 1:
 					if (this_leaf.eax.split.type ==
 							CACHE_TYPE_DATA)
 						new_l1d = this_leaf.size/1024;
@@ -386,19 +387,20 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 							CACHE_TYPE_INST)
 						new_l1i = this_leaf.size/1024;
 					break;
-				    case 2:
+				case 2:
 					new_l2 = this_leaf.size/1024;
 					num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
 					index_msb = get_count_order(num_threads_sharing);
 					l2_id = c->apicid >> index_msb;
 					break;
-				    case 3:
+				case 3:
 					new_l3 = this_leaf.size/1024;
 					num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
-					index_msb = get_count_order(num_threads_sharing);
+					index_msb = get_count_order(
+							num_threads_sharing);
 					l3_id = c->apicid >> index_msb;
 					break;
-				    default:
+				default:
 					break;
 				}
 			}
@@ -421,22 +423,21 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 		/* Number of times to iterate */
 		n = cpuid_eax(2) & 0xFF;
 
-		for ( i = 0 ; i < n ; i++ ) {
+		for (i = 0 ; i < n ; i++) {
 			cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
 
 			/* If bit 31 is set, this is an unknown format */
-			for ( j = 0 ; j < 3 ; j++ ) {
-				if (regs[j] & (1 << 31)) regs[j] = 0;
-			}
+			for (j = 0 ; j < 3 ; j++)
+				if (regs[j] & (1 << 31))
+					regs[j] = 0;
 
 			/* Byte 0 is level count, not a descriptor */
-			for ( j = 1 ; j < 16 ; j++ ) {
+			for (j = 1 ; j < 16 ; j++) {
 				unsigned char des = dp[j];
 				unsigned char k = 0;
 
 				/* look up this descriptor in the table */
-				while (cache_table[k].descriptor != 0)
-				{
+				while (cache_table[k].descriptor != 0) {
 					if (cache_table[k].descriptor == des) {
 						if (only_trace && cache_table[k].cache_type != LVL_TRACE)
 							break;
@@ -488,14 +489,14 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 	}
 
 	if (trace)
-		printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
-	else if ( l1i )
-		printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+		printk(KERN_INFO "CPU: Trace cache: %dK uops", trace);
+	else if (l1i)
+		printk(KERN_INFO "CPU: L1 I cache: %dK", l1i);
 
 	if (l1d)
-		printk(", L1 D cache: %dK\n", l1d);
+		printk(KERN_CONT ", L1 D cache: %dK\n", l1d);
 	else
-		printk("\n");
+		printk(KERN_CONT "\n");
 
 	if (l2)
 		printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
@@ -558,8 +559,13 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 	}
 }
 #else
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
-static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) {}
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+}
+
+static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
+{
+}
 #endif
 
 static void __cpuinit free_cache_attributes(unsigned int cpu)
@@ -645,7 +651,7 @@ static DEFINE_PER_CPU(struct _index_kobject *, index_kobject);
 static ssize_t show_##file_name						\
 			(struct _cpuid4_info *this_leaf, char *buf)	\
 {									\
-	return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \
+	return sprintf(buf, "%lu\n", (unsigned long)this_leaf->object + val); \
 }
 
 show_one_plus(level, eax.split.level, 0);
@@ -656,7 +662,7 @@ show_one_plus(number_of_sets, ecx.split.number_of_sets, 1);
 
 static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
 {
-	return sprintf (buf, "%luK\n", this_leaf->size / 1024);
+	return sprintf(buf, "%luK\n", this_leaf->size / 1024);
 }
 
 static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
@@ -669,7 +675,7 @@ static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
 		const struct cpumask *mask;
 
 		mask = to_cpumask(this_leaf->shared_cpu_map);
-		n = type?
+		n = type ?
 			cpulist_scnprintf(buf, len-2, mask) :
 			cpumask_scnprintf(buf, len-2, mask);
 		buf[n++] = '\n';
@@ -800,7 +806,7 @@ static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
 static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
 		show_cache_disable_1, store_cache_disable_1);
 
-static struct attribute * default_attrs[] = {
+static struct attribute *default_attrs[] = {
 	&type.attr,
 	&level.attr,
 	&coherency_line_size.attr,
@@ -815,7 +821,7 @@ static struct attribute * default_attrs[] = {
 	NULL
 };
 
-static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
+static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
 {
 	struct _cache_attr *fattr = to_attr(attr);
 	struct _index_kobject *this_leaf = to_object(kobj);
@@ -828,8 +834,8 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
 	return ret;
 }
 
-static ssize_t store(struct kobject * kobj, struct attribute * attr,
-		     const char * buf, size_t count)
+static ssize_t store(struct kobject *kobj, struct attribute *attr,
+		     const char *buf, size_t count)
 {
 	struct _cache_attr *fattr = to_attr(attr);
 	struct _index_kobject *this_leaf = to_object(kobj);
@@ -883,7 +889,7 @@ static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
 		goto err_out;
 
 	per_cpu(index_kobject, cpu) = kzalloc(
-	    sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
+	    sizeof(struct _index_kobject) * num_cache_leaves, GFP_KERNEL);
 	if (unlikely(per_cpu(index_kobject, cpu) == NULL))
 		goto err_out;
 
@@ -917,7 +923,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	}
 
 	for (i = 0; i < num_cache_leaves; i++) {
-		this_object = INDEX_KOBJECT_PTR(cpu,i);
+		this_object = INDEX_KOBJECT_PTR(cpu, i);
 		this_object->cpu = cpu;
 		this_object->index = i;
 		retval = kobject_init_and_add(&(this_object->kobj),
@@ -925,9 +931,8 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 					      per_cpu(cache_kobject, cpu),
 					      "index%1lu", i);
 		if (unlikely(retval)) {
-			for (j = 0; j < i; j++) {
-				kobject_put(&(INDEX_KOBJECT_PTR(cpu,j)->kobj));
-			}
+			for (j = 0; j < i; j++)
+				kobject_put(&(INDEX_KOBJECT_PTR(cpu, j)->kobj));
 			kobject_put(per_cpu(cache_kobject, cpu));
 			cpuid4_cache_sysfs_exit(cpu);
 			return retval;
@@ -952,7 +957,7 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
 	cpumask_clear_cpu(cpu, to_cpumask(cache_dev_map));
 
 	for (i = 0; i < num_cache_leaves; i++)
-		kobject_put(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+		kobject_put(&(INDEX_KOBJECT_PTR(cpu, i)->kobj));
 	kobject_put(per_cpu(cache_kobject, cpu));
 	cpuid4_cache_sysfs_exit(cpu);
 }
@@ -977,8 +982,7 @@ static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier =
-{
+static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier = {
 	.notifier_call = cacheinfo_cpu_callback,
 };
 
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6205b..8100a29c854 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -68,16 +68,16 @@ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
 	/* returns the bit offset of the performance counter register */
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
-		return (msr - MSR_K7_PERFCTR0);
+		return msr - MSR_K7_PERFCTR0;
 	case X86_VENDOR_INTEL:
 		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-			return (msr - MSR_ARCH_PERFMON_PERFCTR0);
+			return msr - MSR_ARCH_PERFMON_PERFCTR0;
 
 		switch (boot_cpu_data.x86) {
 		case 6:
-			return (msr - MSR_P6_PERFCTR0);
+			return msr - MSR_P6_PERFCTR0;
 		case 15:
-			return (msr - MSR_P4_BPU_PERFCTR0);
+			return msr - MSR_P4_BPU_PERFCTR0;
 		}
 	}
 	return 0;
@@ -92,16 +92,16 @@ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
 	/* returns the bit offset of the event selection register */
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
-		return (msr - MSR_K7_EVNTSEL0);
+		return msr - MSR_K7_EVNTSEL0;
 	case X86_VENDOR_INTEL:
 		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-			return (msr - MSR_ARCH_PERFMON_EVENTSEL0);
+			return msr - MSR_ARCH_PERFMON_EVENTSEL0;
 
 		switch (boot_cpu_data.x86) {
 		case 6:
-			return (msr - MSR_P6_EVNTSEL0);
+			return msr - MSR_P6_EVNTSEL0;
 		case 15:
-			return (msr - MSR_P4_BSU_ESCR0);
+			return msr - MSR_P4_BSU_ESCR0;
 		}
 	}
 	return 0;
@@ -113,7 +113,7 @@ int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
 {
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	return (!test_bit(counter, perfctr_nmi_owner));
+	return !test_bit(counter, perfctr_nmi_owner);
 }
 
 /* checks the an msr for availability */
@@ -124,7 +124,7 @@ int avail_to_resrv_perfctr_nmi(unsigned int msr)
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	return (!test_bit(counter, perfctr_nmi_owner));
+	return !test_bit(counter, perfctr_nmi_owner);
 }
 EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
 
@@ -237,7 +237,7 @@ static unsigned int adjust_for_32bit_ctr(unsigned int hz)
 	 */
 	counter_val = (u64)cpu_khz * 1000;
 	do_div(counter_val, retval);
- 	if (counter_val > 0x7fffffffULL) {
+	if (counter_val > 0x7fffffffULL) {
 		u64 count = (u64)cpu_khz * 1000;
 		do_div(count, 0x7fffffffUL);
 		retval = count + 1;
@@ -251,7 +251,7 @@ static void write_watchdog_counter(unsigned int perfctr_msr,
 	u64 count = (u64)cpu_khz * 1000;
 
 	do_div(count, nmi_hz);
-	if(descr)
+	if (descr)
 		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsrl(perfctr_msr, 0 - count);
 }
@@ -262,7 +262,7 @@ static void write_watchdog_counter32(unsigned int perfctr_msr,
 	u64 count = (u64)cpu_khz * 1000;
 
 	do_div(count, nmi_hz);
-	if(descr)
+	if (descr)
 		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsr(perfctr_msr, (u32)(-count), 0);
 }
@@ -296,7 +296,7 @@ static int setup_k7_watchdog(unsigned nmi_hz)
 
 	/* setup the timer */
 	wrmsr(evntsel_msr, evntsel, 0);
-	write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz);
+	write_watchdog_counter(perfctr_msr, "K7_PERFCTR0", nmi_hz);
 
 	/* initialize the wd struct before enabling */
 	wd->perfctr_msr = perfctr_msr;
@@ -387,7 +387,7 @@ static int setup_p6_watchdog(unsigned nmi_hz)
 	/* setup the timer */
 	wrmsr(evntsel_msr, evntsel, 0);
 	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
-	write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz);
+	write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0", nmi_hz);
 
 	/* initialize the wd struct before enabling */
 	wd->perfctr_msr = perfctr_msr;
@@ -415,7 +415,7 @@ static void __kprobes p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
 
 	/* P6/ARCH_PERFMON has 32 bit counter write */
-	write_watchdog_counter32(wd->perfctr_msr, NULL,nmi_hz);
+	write_watchdog_counter32(wd->perfctr_msr, NULL, nmi_hz);
 }
 
 static const struct wd_ops p6_wd_ops = {
@@ -490,9 +490,9 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 	if (smp_num_siblings == 2) {
 		unsigned int ebx, apicid;
 
-        	ebx = cpuid_ebx(1);
-	        apicid = (ebx >> 24) & 0xff;
-        	ht_num = apicid & 1;
+		ebx = cpuid_ebx(1);
+		apicid = (ebx >> 24) & 0xff;
+		ht_num = apicid & 1;
 	} else
 #endif
 		ht_num = 0;
@@ -544,7 +544,7 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 	}
 
 	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
-	 	| P4_ESCR_OS
+		| P4_ESCR_OS
 		| P4_ESCR_USR;
 
 	cccr_val |= P4_CCCR_THRESHOLD(15)
@@ -612,7 +612,7 @@ static void __kprobes p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	unsigned dummy;
 	/*
- 	 * P4 quirks:
+	 * P4 quirks:
 	 * - An overflown perfctr will assert its interrupt
 	 *   until the OVF flag in its CCCR is cleared.
 	 * - LVTPC is masked on interrupt and must be
@@ -662,7 +662,8 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 	 * NOTE: Corresponding bit = 0 in ebx indicates event present.
 	 */
 	cpuid(10, &(eax.full), &ebx, &unused, &unused);
-	if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
+	if ((eax.split.mask_length <
+			(ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
 	    (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
 		return 0;
 
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index d5e30397246..1e904346bbf 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -128,7 +128,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			if (i < ARRAY_SIZE(x86_power_flags) &&
 			    x86_power_flags[i])
 				seq_printf(m, "%s%s",
-					   x86_power_flags[i][0]?" ":"",
+					   x86_power_flags[i][0] ? " " : "",
 					   x86_power_flags[i]);
 			else
 				seq_printf(m, " [%d]", i);
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 284c399e323..bc24f514ec9 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -49,17 +49,17 @@ static inline int __vmware_platform(void)
 
 static unsigned long __vmware_get_tsc_khz(void)
 {
-        uint64_t tsc_hz;
-        uint32_t eax, ebx, ecx, edx;
+	uint64_t tsc_hz;
+	uint32_t eax, ebx, ecx, edx;
 
-        VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
+	VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
 
-        if (ebx == UINT_MAX)
-                return 0;
-        tsc_hz = eax | (((uint64_t)ebx) << 32);
-        do_div(tsc_hz, 1000);
-        BUG_ON(tsc_hz >> 32);
-        return tsc_hz;
+	if (ebx == UINT_MAX)
+		return 0;
+	tsc_hz = eax | (((uint64_t)ebx) << 32);
+	do_div(tsc_hz, 1000);
+	BUG_ON(tsc_hz >> 32);
+	return tsc_hz;
 }
 
 /*
-- 
cgit v1.2.3


From 406f104b4172de7452702c6810807c1b0132ba22 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 10 Jul 2009 13:18:26 +0800
Subject: crypto: sha1-s390 - Add export/import support

This patch adds export/import support to sha1-s390.  The exported
type is defined by struct sha1_state, which is basically the entire
descriptor state of sha1_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha1_s390.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index e85ba348722..2c5ec7969e3 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -46,12 +46,38 @@ static int sha1_init(struct shash_desc *desc)
 	return 0;
 }
 
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha1_state *octx = out;
+
+	octx->count = sctx->count;
+	memcpy(octx->state, sctx->state, sizeof(octx->state));
+	memcpy(octx->buffer, sctx->buf, sizeof(octx->buffer));
+	return 0;
+}
+
+static int sha1_import(struct shash_desc *desc, const u8 *in)
+{
+	struct sha1_state *sctx = shash_desc_ctx(desc);
+	struct sha1_state *ictx = in;
+
+	sctx->count = ictx->count;
+	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+	memcpy(sctx->buf, ictx->buffer, sizeof(ictx->buffer));
+	sctx->func = KIMD_SHA_1;
+	return 0;
+}
+
 static struct shash_alg alg = {
 	.digestsize	=	SHA1_DIGEST_SIZE,
 	.init		=	sha1_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha1_export,
+	.import		=	sha1_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha1_state),
 	.base		=	{
 		.cra_name	=	"sha1",
 		.cra_driver_name=	"sha1-s390",
-- 
cgit v1.2.3


From f63559bef380a95093408691c1081f07da755b74 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 10 Jul 2009 13:20:32 +0800
Subject: crypto: sha256-s390 - Add export/import support

This patch adds export/import support to sha256-s390.  The exported
type is defined by struct sha256_state, which is basically the entire
descriptor state of sha256_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha256_s390.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index f9fefc56963..943a669452c 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -42,12 +42,38 @@ static int sha256_init(struct shash_desc *desc)
 	return 0;
 }
 
+static int sha256_export(struct shash_desc *desc, void *out)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha256_state *octx = out;
+
+	octx->count = sctx->count;
+	memcpy(octx->state, sctx->state, sizeof(octx->state));
+	memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+	return 0;
+}
+
+static int sha256_import(struct shash_desc *desc, const u8 *in)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct sha256_state *ictx = in;
+
+	sctx->count = ictx->count;
+	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+	memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+	sctx->func = KIMD_SHA_256;
+	return 0;
+}
+
 static struct shash_alg alg = {
 	.digestsize	=	SHA256_DIGEST_SIZE,
 	.init		=	sha256_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha256_export,
+	.import		=	sha256_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha256_state),
 	.base		=	{
 		.cra_name	=	"sha256",
 		.cra_driver_name=	"sha256-s390",
-- 
cgit v1.2.3


From 473d1cf4ee623b043790838bcf77e77958840bf2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 19:56:58 +0900
Subject: sh: Decouple mcount from ftrace.

This adds a general CONFIG_MCOUNT in order to permit mcount generation
without ftrace support. This is primarily for allowing platforms to
enable aggressive stack overflow checking without having to enable ftrace
support. Based on the sparc64 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug            | 5 +++++
 arch/sh/Makefile                 | 4 ++++
 arch/sh/boot/compressed/Makefile | 2 +-
 arch/sh/kernel/sh_ksyms_32.c     | 2 +-
 arch/sh/lib/Makefile             | 3 +--
 5 files changed, 12 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 52a132c24aa..75b5f4e0667 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -134,4 +134,9 @@ config STACK_DEBUG
 	  call and will therefore incur a major performance hit. Most
 	  users should say N.
 
+config MCOUNT
+	def_bool y
+	depends on SUPERH32
+	depends on STACK_DEBUG || FUNCTION_TRACER
+
 endmenu
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 75d049b03f7..52c34bf5696 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -186,6 +186,10 @@ KBUILD_CFLAGS		+= -pipe $(cflags-y)
 KBUILD_CPPFLAGS		+= $(cflags-y)
 KBUILD_AFLAGS		+= $(cflags-y)
 
+ifeq ($(CONFIG_MCOUNT),y)
+  KBUILD_CFLAGS += -pg
+endif
+
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 9531bf1b7c2..3af239cb9b0 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -23,7 +23,7 @@ IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ifeq ($(CONFIG_MCOUNT),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index fcc5de31f83..5b81116046c 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -106,7 +106,7 @@ EXPORT_SYMBOL(flush_dcache_page);
 EXPORT_SYMBOL(clear_user_page);
 #endif
 
-#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_MCOUNT
 EXPORT_SYMBOL(mcount);
 #endif
 EXPORT_SYMBOL(csum_partial);
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index 19328d90a2d..c2b28d8b2dd 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -24,8 +24,7 @@ memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
 lib-$(CONFIG_MMU)		+= copy_page.o clear_page.o
-lib-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
-lib-$(CONFIG_FUNCTION_GRAPH_TRACER) += mcount.o
+lib-$(CONFIG_MCOUNT)		+= mcount.o
 lib-y				+= $(memcpy-y) $(udivsi3-y)
 
 EXTRA_CFLAGS += -Werror
-- 
cgit v1.2.3


From 9f14b84afda297d301b81a5bcbd65e83d7b02034 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 20:05:34 +0900
Subject: sh: Replace DEBUG_STACKOVERFLOW with STACK_DEBUG.

STACK_DEBUG ties in to mcount in order to do function-granular stack
overflow checks as opposed to lazily checking from IRQ context. As the
default is nohz, the frequency of overflow checking is too irregular to
catch much useful information, and so the mcount approach employed by
sparc64 is adopted instead.

This kills off the old check entirely from the do_IRQ() path and now
adopts CONFIG_MCOUNT instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug | 17 ++++-------------
 arch/sh/kernel/irq.c  | 17 -----------------
 2 files changed, 4 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 75b5f4e0667..b440fd93671 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,12 +61,14 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_STACKOVERFLOW
+config STACK_DEBUG
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
 	help
 	  This option will cause messages to be printed if free stack space
-	  drops below a certain limit.
+	  drops below a certain limit. Saying Y here will add overhead to
+	  every function call and will therefore incur a major
+	  performance hit. Most users should say N.
 
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
@@ -123,17 +125,6 @@ config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
 	depends on SUPERH64
 
-config STACK_DEBUG
-	bool "Enable diagnostic checks of the kernel stack"
-	depends on FUNCTION_TRACER
-	select DEBUG_STACKOVERFLOW
-	default n
-	help
-	  This option allows checks to be performed on the kernel stack
-	  at runtime. Saying Y here will add overhead to every function
-	  call and will therefore incur a major performance hit. Most
-	  users should say N.
-
 config MCOUNT
 	def_bool y
 	depends on SUPERH32
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 3d09062f468..278c68c6048 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -114,23 +114,6 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
 
 	irq_enter();
-
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-	/* Debugging check for stack overflow: is there less than 1KB free? */
-	{
-		long sp;
-
-		__asm__ __volatile__ ("and r15, %0" :
-					"=r" (sp) : "0" (THREAD_SIZE - 1));
-
-		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
-			printk("do_IRQ: stack overflow: %ld\n",
-			       sp - sizeof(struct thread_info));
-			dump_stack();
-		}
-	}
-#endif
-
 	irq = irq_demux(intc_evt2irq(irq));
 
 #ifdef CONFIG_IRQSTACKS
-- 
cgit v1.2.3


From fe27932052aebf77ac5f3e73962825d2aeb457a0 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 20:32:14 +0900
Subject: sh: Use DECLARE_EXPORT() for mcount symbol export.

The function prototype for mcount is not defined if we are not building
with ftrace support enabled, so use DECLARE_EXPORT() to stub one in.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sh_ksyms_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 5b81116046c..cec610888e2 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -107,7 +107,7 @@ EXPORT_SYMBOL(clear_user_page);
 #endif
 
 #ifdef CONFIG_MCOUNT
-EXPORT_SYMBOL(mcount);
+DECLARE_EXPORT(mcount);
 #endif
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
-- 
cgit v1.2.3


From a470b95e99ea77ef1e307ff181e59a4a16caa4f4 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 20:33:34 +0900
Subject: sh: Fix up ftrace build error when STACK_DEBUG=n.

Presently the closest reference to function_trace_stop is within a
CONFIG_STACK_DEBUG block. When this is turned off, the build bails out
with a pcrel too far error. Reorder things a bit to handle the various
combinations.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/mcount.S | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index bd3ec648bec..9e397aafc16 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -192,6 +192,10 @@ ftrace_call:
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
+	.align 2
+.Lfunction_trace_stop:
+	.long	function_trace_stop
+
 /*
  * NOTE: From here on the locations of the .Lftrace_stub label and
  * ftrace_stub itself are fixed. Adding additional data here will skew
@@ -199,7 +203,6 @@ ftrace_call:
  * Place new labels either after the ftrace_stub body, or before
  * ftrace_caller. You have been warned.
  */
-	.align 2
 .Lftrace_stub:
 	.long	ftrace_stub
 
@@ -223,8 +226,6 @@ stack_panic:
 	 nop
 
 	.align 2
-.Lfunction_trace_stop:
-	.long	function_trace_stop
 .L_ebss:
 	.long	_ebss
 .L_init_thread_union:
-- 
cgit v1.2.3


From e460ab27b6c3ea313762169713086529d5bfb8bc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 21:06:53 +0900
Subject: sh: Fix up stack overflow check with ftrace disabled.

Presently the STACK_CHECK() code is called in to multiple times, although
it's only necessary from the mcount entry. The code still attempts to
treat the nop case as an ftrace path resulting in superfluous code flow
for the case where ftrace is disabled. And finally, this also fixes up
references to a few undefined symbols when FUNCTION_TRACER=n.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/mcount.S | 76 +++++++++++++++++++++++++++-------------------------
 1 file changed, 40 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/lib/mcount.S b/arch/sh/lib/mcount.S
index 9e397aafc16..84a57761f17 100644
--- a/arch/sh/lib/mcount.S
+++ b/arch/sh/lib/mcount.S
@@ -1,7 +1,7 @@
 /*
  * arch/sh/lib/mcount.S
  *
- *  Copyright (C) 2008  Paul Mundt
+ *  Copyright (C) 2008, 2009  Paul Mundt
  *  Copyright (C) 2008, 2009  Matt Fleming
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -86,13 +86,18 @@
 	.type	mcount,@function
 _mcount:
 mcount:
+	STACK_CHECK()
+
+#ifndef CONFIG_FUNCTION_TRACER
+	rts
+	 nop
+#else
 #ifndef CONFIG_DYNAMIC_FTRACE
 	mov.l	.Lfunction_trace_stop, r0
 	mov.l	@r0, r0
 	tst	r0, r0
 	bf	ftrace_stub
 #endif
-	STACK_CHECK()
 
 	MCOUNT_ENTER()
 
@@ -174,8 +179,6 @@ ftrace_caller:
 	tst	r0, r0
 	bf	ftrace_stub
 
-	STACK_CHECK()
-
 	MCOUNT_ENTER()
 
 	.globl ftrace_call
@@ -211,38 +214,6 @@ ftrace_stub:
 	rts
 	 nop
 
-#ifdef CONFIG_STACK_DEBUG
-	.globl	stack_panic
-stack_panic:
-	mov.l	.Ldump_stack, r0
-	jsr	@r0
-	 nop
-
-	mov.l	.Lpanic, r0
-	jsr	@r0
-	 mov.l	.Lpanic_s, r4
-
-	rts
-	 nop
-
-	.align 2
-.L_ebss:
-	.long	_ebss
-.L_init_thread_union:
-	.long	init_thread_union
-.Lpanic:
-	.long	panic
-.Lpanic_s:
-	.long	.Lpanic_str
-.Ldump_stack:
-	.long	dump_stack
-
-	.section	.rodata
-	.align 2
-.Lpanic_str:
-	.string "Stack error"
-#endif /* CONFIG_STACK_DEBUG */
-
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl	ftrace_graph_caller
 ftrace_graph_caller:
@@ -304,3 +275,36 @@ return_to_handler:
 .Lftrace_return_to_handler:
 	.long	ftrace_return_to_handler
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_FUNCTION_TRACER */
+
+#ifdef CONFIG_STACK_DEBUG
+	.globl	stack_panic
+stack_panic:
+	mov.l	.Ldump_stack, r0
+	jsr	@r0
+	 nop
+
+	mov.l	.Lpanic, r0
+	jsr	@r0
+	 mov.l	.Lpanic_s, r4
+
+	rts
+	 nop
+
+	.align 2
+.L_ebss:
+	.long	_ebss
+.L_init_thread_union:
+	.long	init_thread_union
+.Lpanic:
+	.long	panic
+.Lpanic_s:
+	.long	.Lpanic_str
+.Ldump_stack:
+	.long	dump_stack
+
+	.section	.rodata
+	.align 2
+.Lpanic_str:
+	.string "Stack error"
+#endif /* CONFIG_STACK_DEBUG */
-- 
cgit v1.2.3


From ee0049d49ad2556222a7b3127be2dae11982f7b3 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:31:58 +0800
Subject: [ARM] remove duplicated #include

Remove duplicated #include('s) in
  arch/arm/mach-mx3/devices.c
  arch/arm/mach-omap1/mcbsp.c
  arch/arm/mach-omap2/mcbsp.c
  arch/arm/plat-stmp3xxx/pinmux.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-mx3/devices.c     | 1 -
 arch/arm/mach-omap1/mcbsp.c     | 1 -
 arch/arm/mach-omap2/mcbsp.c     | 1 -
 arch/arm/plat-stmp3xxx/pinmux.c | 1 -
 4 files changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad4..9e87e08fb12 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896b..505d98cfe50 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..99b6e154631 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d4120038220..6d6b1a468ed 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
 #include <linux/sysdev.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
-- 
cgit v1.2.3


From f7a55fa6ecef8be6d15bd79a803e44a3187ce9d6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:51:40 +0100
Subject: [ARM] remove L_PTE_BUFFERABLE and L_PTE_CACHEABLE

These old symbols are meaningless now that we have memory type
support implemented.  The entire memory type field needs to be
modified rather than just a few bits twiddled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 2 --
 arch/arm/mm/proc-macros.S      | 6 ------
 2 files changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c433c6c7311..d575666d5c4 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -164,8 +164,6 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define L_PTE_PRESENT		(1 << 0)
 #define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* obsolete, matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* obsolete, matches PTE */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..a0b3f36f317 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -80,12 +80,6 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
 #if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
-- 
cgit v1.2.3


From 6a00cded91532f3d58e07729ba56269339281d8e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:57:20 +0100
Subject: [ARM] pgtable: rearrange file PTE bit allocation

For future compatibility, we need to ensure that swap and file Linux
PTEs conform with the hardware PTEs "fault" encoding.  Swap PTEs
already fit in with this, but file PTEs do not.  Shift them by one
bit to ensure that they conform, using bit 2 to distinguish between
swap and file PTEs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index d575666d5c4..9655bce3d34 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,8 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  * entries are stored 1024 bytes below.
  */
 #define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_FILE		(1 << 2)	/* only when !PRESENT */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
@@ -379,13 +379,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <--- type --> 0 0
+ *   <--------------- offset --------------------> <- type --> 0 0 0
  *
- * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * This gives us up to 63 swap files and 32GB per swap file.  Note that
  * the offset field is always non-zero.
  */
-#define __SWP_TYPE_SHIFT	2
-#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_SHIFT	3
+#define __SWP_TYPE_BITS		6
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 
@@ -409,13 +409,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <------------------------ offset -------------------------> 1 0
+ *   <----------------------- offset ------------------------> 1 0 0
  */
 #define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | L_PTE_FILE)
 
-#define PTE_FILE_MAX_BITS	30
+#define PTE_FILE_MAX_BITS	29
 
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
-- 
cgit v1.2.3


From df8ce2595fbac8b046322fce9df61ce1cf8ddf62 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 12 Jul 2009 01:37:30 +0900
Subject: sh: Tidy up gzip-based zImage decompression.

This brings the zImage handling in to the current century, in preparation
for handling the other compression types.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                   |   1 +
 arch/sh/boot/compressed/misc_32.c | 106 ++++---------------------------
 arch/sh/boot/compressed/misc_64.c | 127 +++-----------------------------------
 3 files changed, 19 insertions(+), 215 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 120bd31a46e..9f531ca3c8e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -17,6 +17,7 @@ config SUPERH
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_PERF_COUNTERS
+	select HAVE_KERNEL_GZIP
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	help
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index efdba6b2957..1ab4f49153b 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -14,73 +14,23 @@
 #include <asm/uaccess.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
-#ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
-#endif
 
 /*
  * gzip declarations
  */
 
-#define OF(args)  args
 #define STATIC static
 
 #undef memset
 #undef memcpy
 #define memzero(s, n)     memset ((s), 0, (n))
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-static unsigned insize = 0;  /* valid bytes in inbuf */
-static unsigned inptr = 0;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int  fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
 extern char input_data[];
 extern int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned char *output;
 
 static void error(char *m);
 
@@ -93,7 +43,9 @@ static unsigned long free_mem_end_ptr;
 
 #define HEAP_SIZE             0x10000
 
-#include "../../../../lib/inflate.c"
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
 
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
@@ -138,44 +90,6 @@ void* memcpy(void* __dest, __const void* __src,
 	return __dest;
 }
 
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
-}
-
 static void error(char *x)
 {
 	puts("\n\n");
@@ -191,16 +105,18 @@ long* stack_start = &user_stack[STACK_SIZE];
 
 void decompress_kernel(void)
 {
-	output_data = NULL;
-	output_ptr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
+	unsigned long output_addr;
+
+	output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
 #ifdef CONFIG_29BIT
-	output_ptr |= P2SEG;
+	output_addr |= P2SEG;
 #endif
+
+	output = (unsigned char *)output_addr;
 	free_mem_ptr = (unsigned long)&_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
 
-	makecrc();
 	puts("Uncompressing Linux... ");
-	gunzip();
+	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
 	puts("Ok, booting the kernel.\n");
 }
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index 2941657e18a..0c6894e3711 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -20,67 +20,18 @@ int cache_control(unsigned int command);
  * gzip declarations
  */
 
-#define OF(args)  args
 #define STATIC static
 
 #undef memset
 #undef memcpy
 #define memzero(s, n)     memset ((s), 0, (n))
 
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;		/* input buffer */
-static uch window[WSIZE];	/* Sliding window buffer */
-
-static unsigned insize = 0;	/* valid bytes in inbuf */
-static unsigned inptr = 0;	/* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0;	/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01	/* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02	/* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04	/* bit 2 set: extra field present */
-#define ORIG_NAME    0x08	/* bit 3 set: original file name present */
-#define COMMENT      0x10	/* bit 4 set: file comment present */
-#define ENCRYPTED    0x20	/* bit 5 set: file is encrypted */
-#define RESERVED     0xC0	/* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
 extern char input_data[];
 extern int input_len;
 
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
-static void error(char *m);
+static unsigned char *output_data;
 
 static void puts(const char *);
 
@@ -91,7 +42,9 @@ static unsigned long free_mem_end_ptr;
 
 #define HEAP_SIZE             0x10000
 
-#include "../../../../lib/inflate.c"
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
 
 void puts(const char *s)
 {
@@ -117,45 +70,6 @@ void *memcpy(void *__dest, __const void *__src, size_t __n)
 	return __dest;
 }
 
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
-	if (insize != 0) {
-		error("ran out of input data\n");
-	}
-
-	inbuf = input_data;
-	insize = input_len;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
-	ulg c = crc;		/* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out++ = *in++;
-		c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg) outcnt;
-	output_ptr += (ulg) outcnt;
-	outcnt = 0;
-	puts(".");
-}
-
 static void error(char *x)
 {
 	puts("\n\n");
@@ -171,40 +85,13 @@ long *stack_start = &user_stack[STACK_SIZE];
 
 void decompress_kernel(void)
 {
-	output_data = (uch *) (CONFIG_MEMORY_START + 0x2000);
+	output_data = (unsigned char *) (CONFIG_MEMORY_START + 0x2000);
 	free_mem_ptr = (unsigned long) &_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
 
-	makecrc();
 	puts("Uncompressing Linux... ");
 	cache_control(CACHE_ENABLE);
-	gunzip();
-	puts("\n");
-
-#if 0
-	/* When booting from ROM may want to do something like this if the
-	 * boot loader doesn't.
-	 */
-
-	/* Set up the parameters and command line */
-	{
-		volatile unsigned int *parambase =
-		    (int *) (CONFIG_MEMORY_START + 0x1000);
-
-		parambase[0] = 0x1;	/* MOUNT_ROOT_RDONLY */
-		parambase[1] = 0x0;	/* RAMDISK_FLAGS */
-		parambase[2] = 0x0200;	/* ORIG_ROOT_DEV */
-		parambase[3] = 0x0;	/* LOADER_TYPE */
-		parambase[4] = 0x0;	/* INITRD_START */
-		parambase[5] = 0x0;	/* INITRD_SIZE */
-		parambase[6] = 0;
-
-		strcpy((char *) ((int) parambase + 0x100),
-		       "console=ttySC0,38400");
-	}
-#endif
-
-	puts("Ok, booting the kernel.\n");
-
+	decompress(input_data, input_len, NULL, NULL, output_data, NULL, error);
 	cache_control(CACHE_DISABLE);
+	puts("Ok, booting the kernel.\n");
 }
-- 
cgit v1.2.3


From 07e88e1bfc128681a80578724fde6a872f413862 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 13:21:19 -0400
Subject: sh: bzip2/lzma zImage support.

This plugs in bzip2 and lzma support for zImages.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                     |  2 ++
 arch/sh/boot/compressed/.gitignore  |  1 +
 arch/sh/boot/compressed/Makefile    | 19 ++++++++++++++++---
 arch/sh/boot/compressed/misc_32.c   | 14 +++++++++++++-
 arch/sh/boot/compressed/misc_64.c   | 14 +++++++++++++-
 arch/sh/boot/compressed/piggy.S     |  8 --------
 arch/sh/boot/compressed/vmlinux.scr | 10 ++++++++++
 7 files changed, 55 insertions(+), 13 deletions(-)
 create mode 100644 arch/sh/boot/compressed/.gitignore
 delete mode 100644 arch/sh/boot/compressed/piggy.S
 create mode 100644 arch/sh/boot/compressed/vmlinux.scr

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9f531ca3c8e..c4a955d2545 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -18,6 +18,8 @@ config SUPERH
 	select HAVE_DMA_API_DEBUG
 	select HAVE_PERF_COUNTERS
 	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	help
diff --git a/arch/sh/boot/compressed/.gitignore b/arch/sh/boot/compressed/.gitignore
new file mode 100644
index 00000000000..2374a83d87b
--- /dev/null
+++ b/arch/sh/boot/compressed/.gitignore
@@ -0,0 +1 @@
+vmlinux.bin.*
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 9531bf1b7c2..0a4e7af8a71 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -5,6 +5,7 @@
 #
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
+		   vmlinux.bin.bz2 vmlinux.bin.lzma \
 		   head_$(BITS).o misc_$(BITS).o piggy.o
 
 OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o
@@ -38,10 +39,22 @@ $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+vmlinux.bin.all-y := $(obj)/vmlinux.bin
+
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,lzma)
+
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
 
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,as_o_S)
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
+	$(call if_changed,ld)
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index 1ab4f49153b..b86e3596918 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -41,12 +41,24 @@ extern int _end;
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
-#define HEAP_SIZE             0x10000
+#ifdef CONFIG_HAVE_KERNEL_BZIP2
+#define HEAP_SIZE	0x400000
+#else
+#define HEAP_SIZE	0x10000
+#endif
 
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
 #endif
 
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
 {
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index 0c6894e3711..09b7b7cd24f 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -40,12 +40,24 @@ extern int _end;
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
-#define HEAP_SIZE             0x10000
+#ifdef CONFIG_HAVE_KERNEL_BZIP2
+#define HEAP_SIZE	0x400000
+#else
+#define HEAP_SIZE	0x10000
+#endif
 
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
 #endif
 
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
 void puts(const char *s)
 {
 }
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
deleted file mode 100644
index 566071926b1..00000000000
--- a/arch/sh/boot/compressed/piggy.S
+++ /dev/null
@@ -1,8 +0,0 @@
-	.global	input_len, input_data
-	.data
-input_len:
-	.long	input_data_end - input_data
-input_data:
-	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
-input_data_end:
-	.end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
new file mode 100644
index 00000000000..f02382ae5c4
--- /dev/null
+++ b/arch/sh/boot/compressed/vmlinux.scr
@@ -0,0 +1,10 @@
+SECTIONS
+{
+  .rodata.compressed : {
+	input_len = .;
+	LONG(input_data_end - input_data) input_data = .;
+	*(.data)
+	output_len = . - 4;
+	input_data_end = .;
+	}
+}
-- 
cgit v1.2.3


From b14c6d428a54fb3235e69fd78fba9080c96645be Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 13:30:38 -0400
Subject: sh: Consolidate the sh64 changes in arch/sh/boot/compressed/misc_32.c

This makes some minor changes to misc_32.c so that it can be used by
sh64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/compressed/misc_32.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index b86e3596918..4eb27e61f8e 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -26,7 +26,10 @@
 #undef memcpy
 #define memzero(s, n)     memset ((s), 0, (n))
 
-static void error(char *m);
+/* cache.c */
+#define CACHE_ENABLE      0
+#define CACHE_DISABLE     1
+int cache_control(unsigned int command);
 
 extern char input_data[];
 extern int input_len;
@@ -111,9 +114,15 @@ static void error(char *x)
 	while(1);	/* Halt */
 }
 
+#ifdef CONFIG_SUPERH64
+#define stackalign	8
+#else
+#define stackalign	4
+#endif
+
 #define STACK_SIZE (4096)
-long user_stack [STACK_SIZE];
-long* stack_start = &user_stack[STACK_SIZE];
+long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
 
 void decompress_kernel(void)
 {
@@ -129,6 +138,8 @@ void decompress_kernel(void)
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
 
 	puts("Uncompressing Linux... ");
+	cache_control(CACHE_ENABLE);
 	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+	cache_control(CACHE_DISABLE);
 	puts("Ok, booting the kernel.\n");
 }
-- 
cgit v1.2.3


From 59f002964f4e6668a0132cd796b82f7f8a4803f0 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 13:32:24 -0400
Subject: sh: rename arch/sh/boot/compressed/misc_32.c -> misc.c

This is now used by both sh64 and regular sh, kill off the old sh64
version now too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/compressed/Makefile  |   4 +-
 arch/sh/boot/compressed/misc.c    | 145 ++++++++++++++++++++++++++++++++++++++
 arch/sh/boot/compressed/misc_32.c | 145 --------------------------------------
 arch/sh/boot/compressed/misc_64.c | 109 ----------------------------
 4 files changed, 147 insertions(+), 256 deletions(-)
 create mode 100644 arch/sh/boot/compressed/misc.c
 delete mode 100644 arch/sh/boot/compressed/misc_32.c
 delete mode 100644 arch/sh/boot/compressed/misc_64.c

(limited to 'arch')

diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 0a4e7af8a71..3324019e207 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -6,9 +6,9 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 		   vmlinux.bin.bz2 vmlinux.bin.lzma \
-		   head_$(BITS).o misc_$(BITS).o piggy.o
+		   head_$(BITS).o misc.o piggy.o
 
-OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o
+OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
 
 ifdef CONFIG_SH_STANDARD_BIOS
 OBJECTS += $(obj)/../../kernel/sh_bios.o
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
new file mode 100644
index 00000000000..4eb27e61f8e
--- /dev/null
+++ b/arch/sh/boot/compressed/misc.c
@@ -0,0 +1,145 @@
+/*
+ * arch/sh/boot/compressed/misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ *
+ * Adapted for SH by Stuart Menefy, Aug 1999
+ *
+ * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
+ */
+
+#include <asm/uaccess.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+#include <asm/sh_bios.h>
+
+/*
+ * gzip declarations
+ */
+
+#define STATIC static
+
+#undef memset
+#undef memcpy
+#define memzero(s, n)     memset ((s), 0, (n))
+
+/* cache.c */
+#define CACHE_ENABLE      0
+#define CACHE_DISABLE     1
+int cache_control(unsigned int command);
+
+extern char input_data[];
+extern int input_len;
+static unsigned char *output;
+
+static void error(char *m);
+
+int puts(const char *);
+
+extern int _text;		/* Defined in vmlinux.lds.S */
+extern int _end;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
+
+#ifdef CONFIG_HAVE_KERNEL_BZIP2
+#define HEAP_SIZE	0x400000
+#else
+#define HEAP_SIZE	0x10000
+#endif
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+size_t strlen(const char *s)
+{
+	int i = 0;
+
+	while (*s++)
+		i++;
+	return i;
+}
+
+int puts(const char *s)
+{
+	int len = strlen(s);
+	sh_bios_console_write(s, len);
+	return len;
+}
+#else
+int puts(const char *s)
+{
+	/* This should be updated to use the sh-sci routines */
+	return 0;
+}
+#endif
+
+void* memset(void* s, int c, size_t n)
+{
+	int i;
+	char *ss = (char*)s;
+
+	for (i=0;i<n;i++) ss[i] = c;
+	return s;
+}
+
+void* memcpy(void* __dest, __const void* __src,
+			    size_t __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i=0;i<__n;i++) d[i] = s[i];
+	return __dest;
+}
+
+static void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	while(1);	/* Halt */
+}
+
+#ifdef CONFIG_SUPERH64
+#define stackalign	8
+#else
+#define stackalign	4
+#endif
+
+#define STACK_SIZE (4096)
+long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
+long *stack_start = &user_stack[STACK_SIZE];
+
+void decompress_kernel(void)
+{
+	unsigned long output_addr;
+
+	output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
+#ifdef CONFIG_29BIT
+	output_addr |= P2SEG;
+#endif
+
+	output = (unsigned char *)output_addr;
+	free_mem_ptr = (unsigned long)&_end;
+	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
+	puts("Uncompressing Linux... ");
+	cache_control(CACHE_ENABLE);
+	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
+	cache_control(CACHE_DISABLE);
+	puts("Ok, booting the kernel.\n");
+}
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
deleted file mode 100644
index 4eb27e61f8e..00000000000
--- a/arch/sh/boot/compressed/misc_32.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * arch/sh/boot/compressed/misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SH by Stuart Menefy, Aug 1999
- *
- * Modified to use standard LinuxSH BIOS by Greg Banks 7Jul2000
- */
-
-#include <asm/uaccess.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/sh_bios.h>
-
-/*
- * gzip declarations
- */
-
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-/* cache.c */
-#define CACHE_ENABLE      0
-#define CACHE_DISABLE     1
-int cache_control(unsigned int command);
-
-extern char input_data[];
-extern int input_len;
-static unsigned char *output;
-
-static void error(char *m);
-
-int puts(const char *);
-
-extern int _text;		/* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef CONFIG_HAVE_KERNEL_BZIP2
-#define HEAP_SIZE	0x400000
-#else
-#define HEAP_SIZE	0x10000
-#endif
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_BZIP2
-#include "../../../../lib/decompress_bunzip2.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-#ifdef CONFIG_SH_STANDARD_BIOS
-size_t strlen(const char *s)
-{
-	int i = 0;
-
-	while (*s++)
-		i++;
-	return i;
-}
-
-int puts(const char *s)
-{
-	int len = strlen(s);
-	sh_bios_console_write(s, len);
-	return len;
-}
-#else
-int puts(const char *s)
-{
-	/* This should be updated to use the sh-sci routines */
-	return 0;
-}
-#endif
-
-void* memset(void* s, int c, size_t n)
-{
-	int i;
-	char *ss = (char*)s;
-
-	for (i=0;i<n;i++) ss[i] = c;
-	return s;
-}
-
-void* memcpy(void* __dest, __const void* __src,
-			    size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i=0;i<__n;i++) d[i] = s[i];
-	return __dest;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-#ifdef CONFIG_SUPERH64
-#define stackalign	8
-#else
-#define stackalign	4
-#endif
-
-#define STACK_SIZE (4096)
-long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
-	unsigned long output_addr;
-
-	output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
-#ifdef CONFIG_29BIT
-	output_addr |= P2SEG;
-#endif
-
-	output = (unsigned char *)output_addr;
-	free_mem_ptr = (unsigned long)&_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
-	puts("Uncompressing Linux... ");
-	cache_control(CACHE_ENABLE);
-	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
-	cache_control(CACHE_DISABLE);
-	puts("Ok, booting the kernel.\n");
-}
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
deleted file mode 100644
index 09b7b7cd24f..00000000000
--- a/arch/sh/boot/compressed/misc_64.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * arch/sh/boot/compressed/misc_64.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- *
- * Adapted for SHmedia from sh by Stuart Menefy, May 2002
- */
-
-#include <asm/uaccess.h>
-
-/* cache.c */
-#define CACHE_ENABLE      0
-#define CACHE_DISABLE     1
-int cache_control(unsigned int command);
-
-/*
- * gzip declarations
- */
-
-#define STATIC static
-
-#undef memset
-#undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
-
-static void error(char *m);
-
-extern char input_data[];
-extern int input_len;
-
-static unsigned char *output_data;
-
-static void puts(const char *);
-
-extern int _text;		/* Defined in vmlinux.lds.S */
-extern int _end;
-static unsigned long free_mem_ptr;
-static unsigned long free_mem_end_ptr;
-
-#ifdef CONFIG_HAVE_KERNEL_BZIP2
-#define HEAP_SIZE	0x400000
-#else
-#define HEAP_SIZE	0x10000
-#endif
-
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_BZIP2
-#include "../../../../lib/decompress_bunzip2.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-void puts(const char *s)
-{
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *) s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *) __dest, *s = (char *) __src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-	return __dest;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while (1) ;		/* Halt */
-}
-
-#define STACK_SIZE (4096)
-long __attribute__ ((aligned(8))) user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
-void decompress_kernel(void)
-{
-	output_data = (unsigned char *) (CONFIG_MEMORY_START + 0x2000);
-	free_mem_ptr = (unsigned long) &_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-
-	puts("Uncompressing Linux... ");
-	cache_control(CACHE_ENABLE);
-	decompress(input_data, input_len, NULL, NULL, output_data, NULL, error);
-	cache_control(CACHE_DISABLE);
-	puts("Ok, booting the kernel.\n");
-}
-- 
cgit v1.2.3


From 040f43e0bf70935cbe8a775110206d11367e11db Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 11 Jul 2009 13:36:25 -0400
Subject: sh64: Don't use PHYSADDR() for output_addr calculation.

Opencode the MEMORY_START offset directly, sh64 uses a slightly different
calculation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/compressed/misc.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index 4eb27e61f8e..fd56a71ca9d 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -128,9 +128,13 @@ void decompress_kernel(void)
 {
 	unsigned long output_addr;
 
+#ifdef CONFIG_SUPERH64
+	output_addr = (CONFIG_MEMORY_START + 0x2000);
+#else
 	output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
 #ifdef CONFIG_29BIT
 	output_addr |= P2SEG;
+#endif
 #endif
 
 	output = (unsigned char *)output_addr;
-- 
cgit v1.2.3


From 5396730b3caad500ceba84c9391143cafb5938a8 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 9 Jul 2009 23:22:07 +0100
Subject: [ARM] 5598/1: ep93xx: core.c typesafe vic_init

The EP93XX_VIC{1/2}_BASE defines are now typesafe due to
[ARM] 5573/1: ep93xx: ensure typesafe io.  The (void *) cast
is not needed when calling vic_init().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ce10f5b5dfb..68ac0545f57 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -345,8 +345,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
-- 
cgit v1.2.3


From 405f55712dfe464b3240d7816cc4fe4174831be2 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 11 Jul 2009 22:08:37 +0400
Subject: headers: smp_lock.h redux

* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/ptrace.c              | 1 -
 arch/blackfin/kernel/ptrace.c           | 1 -
 arch/blackfin/kernel/sys_bfin.c         | 1 -
 arch/cris/kernel/sys_cris.c             | 1 -
 arch/ia64/kernel/ptrace.c               | 1 -
 arch/m32r/kernel/ptrace.c               | 1 -
 arch/microblaze/kernel/ptrace.c         | 1 -
 arch/microblaze/kernel/signal.c         | 1 -
 arch/microblaze/kernel/sys_microblaze.c | 1 -
 arch/mips/kernel/ptrace32.c             | 1 -
 arch/mips/mm/hugetlbpage.c              | 1 -
 arch/mn10300/kernel/ptrace.c            | 1 -
 arch/mn10300/kernel/signal.c            | 1 -
 arch/mn10300/kernel/sys_mn10300.c       | 1 -
 arch/mn10300/kernel/traps.c             | 1 -
 arch/mn10300/mm/fault.c                 | 1 -
 arch/mn10300/mm/misalignment.c          | 1 -
 arch/powerpc/kernel/ptrace32.c          | 1 -
 arch/s390/kernel/dis.c                  | 1 -
 arch/s390/kernel/ptrace.c               | 1 -
 arch/s390/mm/fault.c                    | 1 -
 arch/sh/mm/tlb-sh3.c                    | 1 -
 arch/sparc/kernel/ptrace_32.c           | 1 -
 arch/sparc/kernel/ptrace_64.c           | 1 -
 arch/sparc/kernel/time_64.c             | 1 -
 arch/sparc/kernel/traps_32.c            | 1 -
 26 files changed, 26 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index 1e9ad52c460..e072041d19f 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -8,7 +8,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index d76618db50d..6a387eec6b6 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -31,7 +31,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index a8f1329c15a..3da60fb13ce 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -29,7 +29,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index a79fbd87021..2ad962c7e88 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -15,7 +15,6 @@
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 92c9689b7d9..9daa87fdb01 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -15,7 +15,6 @@
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
-#include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/audit.h>
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index bf0abe9e1f7..98b8feb12ed 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -19,7 +19,6 @@
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index b86aa623e36..53ff39af6a5 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/ptrace.h>
 #include <linux/signal.h>
 
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 493819c25fb..1c80e4fc40c 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 8c9ebac5da1..e000bce09b2 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index c4f9ac17474..32644b4a071 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -22,7 +22,6 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
 
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index 471c09aa161..8c2834f5919 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
index e143339ad28..cf847dabc1b 100644
--- a/arch/mn10300/kernel/ptrace.c
+++ b/arch/mn10300/kernel/ptrace.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 9f7572a0f57..feb2f2e810d 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index bca5a84dc72..29d196b83d2 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -13,7 +13,6 @@
 #include <linux/syscalls.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 0dfdc500112..91365adba4f 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index a62e1e138bc..53bb17d0f06 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -20,7 +20,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/vt_kern.h>		/* For unblank_screen() */
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
index 94c4a435806..30016251f65 100644
--- a/arch/mn10300/mm/misalignment.c
+++ b/arch/mn10300/mm/misalignment.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 297632cba04..8a6daf4129f 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index d2f270c995d..db943a7ec51 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -15,7 +15,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 490b39934d6..43acd73105b 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -26,7 +26,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 74eb26bf197..e5e119fe03b 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -22,7 +22,6 @@
 #include <linux/compat.h>
 #include <linux/smp.h>
 #include <linux/kdebug.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/module.h>
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 7fbfd5a11ff..17cb7c3adf2 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -18,7 +18,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 
 #include <asm/system.h>
diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c
index 8ce6285a06d..7e3dfd9bb97 100644
--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -16,7 +16,6 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/security.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index a941c610e7c..4ae91dc2feb 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/security.h>
 #include <linux/seccomp.h>
 #include <linux/audit.h>
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 5c12e79b4bd..da1218e8ee8 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 358283341b4..c0490c7bbde 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kdebug.h>
 
 #include <asm/delay.h>
-- 
cgit v1.2.3


From 08f42877aff6b966a386c47e0aeb98e7645db2a9 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Thu, 2 Jul 2009 23:27:22 +0200
Subject: sparc: remove driver-core BUS_ID_SIZE

The name size limit is gone from the driver-core, the BUS_ID_SIZE
value will be removed.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/sparc/kernel/vio.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 753d128ed15..c28c71449a6 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -224,7 +224,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	if (!strcmp(type, "domain-services-port"))
 		bus_id_name = "ds";
 
-	if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
+	/*
+	 * 20 char is the old driver-core name size limit, which is no more.
+	 * This check can probably be removed after review and possible
+	 * adaption of the vio users name length handling.
+	 */
+	if (strlen(bus_id_name) >= 20 - 4) {
 		printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
 		       bus_id_name);
 		return NULL;
-- 
cgit v1.2.3


From f1c6a58121f9846ac665b0fbd3cbab90ce8bcbac Mon Sep 17 00:00:00 2001
From: Daniel Qarras <dqarras@yahoo.com>
Date: Sun, 12 Jul 2009 04:32:40 -0700
Subject: perf_counter, x86: Extend perf_counter Pentium M support

I've attached a patch to remove the Pentium M special casing of
EMON and as noticed at least with my Pentium M the hardware PMU
now works:

 Performance counter stats for '/bin/ls /var/tmp':

       1.809988  task-clock-msecs         #      0.125 CPUs
              1  context-switches         #      0.001 M/sec
              0  CPU-migrations           #	 0.000 M/sec
            224  page-faults              #	 0.124 M/sec
        1425648  cycles                   #    787.656 M/sec
         912755  instructions             #	 0.640 IPC

Vince suggested that this code was trying to address erratum
Y17 in Pentium-M's:

  http://download.intel.com/support/processors/mobile/pm/sb/25266532.pdf

But that erratum (related to IA32_MISC_ENABLES.7) does not
affect perfcounters as we dont use this toggle to disable RDPMC
and WRMSR/RDMSR access to performance counters. We keep cr4's
bit 8 (X86_CR4_PCE) clear so unprivileged RDPMC access is not
allowed anyway.

Cc: Vince Weaver <vince@deater.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index bed1c4c2f25..7e346d4bc0f 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -1583,10 +1583,8 @@ static int p6_pmu_init(void)
 		break;
 	case 9:
 	case 13:
-		/* for Pentium M, we need to check if PMU exist */
-		rdmsr(MSR_IA32_MISC_ENABLE, low, high);
-		if (low & MSR_IA32_MISC_ENABLE_EMON)
-			break;
+		/* Pentium M */
+		break;
 	default:
 		pr_cont("unsupported p6 CPU model %d ",
 			boot_cpu_data.x86_model);
-- 
cgit v1.2.3


From 151586d0f70405d99324d89aea13706cf6d7f993 Mon Sep 17 00:00:00 2001
From: Rakib Mullick <rakib.mullick@gmail.com>
Date: Sun, 12 Jul 2009 17:04:12 +0600
Subject: x86: Fix false positive section mismatch in es7000_32.c

The variable apic_es7000_cluster references the function __cpuinit
wakeup_secondary_cpu_via_mip() from a noninit section. So we've been
warned by the following warning. To avoid possible collision between
init/noninit, its best to mark the variable as __refdata.

We were warned by the following warning:

  LD      arch/x86/kernel/apic/built-in.o
  WARNING: arch/x86/kernel/apic/built-in.o(.data+0x198c): Section
  mismatch in reference from the variable apic_es7000_cluster to the
  function .cpuinit.text:wakeup_secondary_cpu_via_mip()

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
LKML-Reference: <b9df5fa10907120404k6279a10ch5e9682432272706f@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/es7000_32.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 69328ac8de9..8952a589028 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -652,7 +652,8 @@ static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem,
 	return ret && es7000_apic_is_cluster();
 }
 
-struct apic apic_es7000_cluster = {
+/* We've been warned by a false positive warning.Use __refdata to keep calm. */
+struct apic __refdata apic_es7000_cluster = {
 
 	.name				= "es7000",
 	.probe				= probe_es7000,
-- 
cgit v1.2.3


From 7473727be884293c8171775a148e1d174d1606e6 Mon Sep 17 00:00:00 2001
From: Rakib Mullick <rakib.mullick@gmail.com>
Date: Sun, 12 Jul 2009 17:07:19 +0600
Subject: x86, apic: Fix false positive section mismatch in numaq_32.c

The variable apic_numaq placed in noninit section references the
function wakeup_secondary_cpu_via_nmi(), which is in __cpuinit
section. Thus causes a section mismatch warning. To avoid such
mismatch we mark apic_numaq as __refdata.

We were warned by the following warning:

  WARNING: arch/x86/kernel/built-in.o(.data+0x932c): Section mismatch in
  reference from the variable apic_numaq to the function
  .cpuinit.text:wakeup_secondary_cpu_via_nmi()

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
LKML-Reference: <b9df5fa10907120407p6b4f67dtf4d563155488188a@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/numaq_32.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 533e59c6fc8..ca96e68f0d2 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -493,7 +493,8 @@ static void numaq_setup_portio_remap(void)
 		(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
 }
 
-struct apic apic_numaq = {
+/* Use __refdata to keep false positive warning calm.	*/
+struct apic __refdata apic_numaq = {
 
 	.name				= "NUMAQ",
 	.probe				= probe_numaq,
-- 
cgit v1.2.3


From 5fddcdb70fd9e8fd52d42ed52a572fecb8eb7cde Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Mon, 13 Jul 2009 15:09:25 +0100
Subject: mn10300: remove duplicated #include

Remove duplicated #include('s) in
  arch/mn10300/kernel/sys_mn10300.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/sys_mn10300.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 29d196b83d2..3e52a105432 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -20,7 +20,6 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
-#include <linux/syscalls.h>
 #include <linux/tty.h>
 
 #include <asm/uaccess.h>
-- 
cgit v1.2.3


From 05dd2cd3bb3299540e33ff60c5b401dd88f273bd Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Mon, 13 Jul 2009 11:38:04 +0000
Subject: sh: Restore previous behaviour on kernel fault

The last commit changed the behaviour on kernel faults when we were
doing something other than syncing the page tables. vmalloc_sync_one()
needs to return NULL if the page tables are up to date, because the
reason for the fault was not a missing/inconsitent page table entry. By
returning NULL if the page tables are sync'd we signal to the calling
function that further work must be done to resolve this fault.

Also, remove the superfluous __va() around the first argument to
vmalloc_sync_one(). The value of pgd_k is already a virtual address and
using it wth __va() causes a NULL dereference.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/fault_32.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 08d0117d90f..dbbdeba2cee 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -60,8 +60,15 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 
 	if (!pmd_present(*pmd))
 		set_pmd(pmd, *pmd_k);
-	else
+	else {
+		/*
+		 * The page tables are fully synchronised so there must
+		 * be another reason for the fault. Return NULL here to
+		 * signal that we have not taken care of the fault.
+		 */
 		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
+		return NULL;
+	}
 
 	return pmd_k;
 }
@@ -87,7 +94,7 @@ static noinline int vmalloc_fault(unsigned long address)
 	 * an interrupt in the middle of a task switch..
 	 */
 	pgd_k = get_TTB();
-	pmd_k = vmalloc_sync_one(__va((unsigned long)pgd_k), address);
+	pmd_k = vmalloc_sync_one(pgd_k, address);
 	if (!pmd_k)
 		return -1;
 
-- 
cgit v1.2.3


From 72849873cdf213b5d7b8ae006e6740b2d78f6ad8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 14 Jul 2009 06:51:54 -0400
Subject: sh: Kill off zero-sized vmlinux_64.lds.S

This seems to be some merge damage, kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/vmlinux_64.lds.S | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 delete mode 100644 arch/sh/kernel/vmlinux_64.lds.S

(limited to 'arch')

diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S
deleted file mode 100644
index e69de29bb2d..00000000000
-- 
cgit v1.2.3


From 8045a4c293d36c61656a20d581b11f7f0cd7acd5 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 7 Jul 2009 19:30:25 +0200
Subject: x86/oprofile: Fix cast of counter value

When casting the counter value to a 64 bit value in 32 bit mode, sign
extension may lead to broken counter values. This patch fixes this by
casting to (u64) instead of (s64).

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 4 ++--
 arch/x86/oprofile/op_model_p4.c  | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index e95268eb922..7ca8306aefa 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -111,7 +111,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			wrmsrl(msrs->counters[i].addr,
-			       -(s64)counter_config[i].count);
+			       -(u64)counter_config[i].count);
 			rdmsrl(msrs->controls[i].addr, val);
 			val &= model->reserved;
 			val |= op_x86_get_ctrl(model, &counter_config[i]);
@@ -237,7 +237,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 		if (val & OP_CTR_OVERFLOW)
 			continue;
 		oprofile_add_sample(regs, i);
-		wrmsrl(msrs->counters[i].addr, -(s64)reset_value[i]);
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[i]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index f01e53b118f..9db9e361182 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -580,7 +580,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
 			wrmsrl(p4_counters[VIRT_CTR(stag, i)].counter_address,
-			       -(s64)counter_config[i].count);
+			       -(u64)counter_config[i].count);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -625,11 +625,11 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 		if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
 			oprofile_add_sample(regs, i);
 			wrmsrl(p4_counters[real].counter_address,
-			       -(s64)reset_value[i]);
+			       -(u64)reset_value[i]);
 			CCCR_CLEAR_OVF(low);
 			wrmsr(p4_counters[real].cccr_address, low, high);
 			wrmsrl(p4_counters[real].counter_address,
-			       -(s64)reset_value[i]);
+			       -(u64)reset_value[i]);
 		}
 	}
 
-- 
cgit v1.2.3


From 2ad76643ff58bb8841f391ea8327c14abe273ea3 Mon Sep 17 00:00:00 2001
From: Dave Jones <davej@redhat.com>
Date: Mon, 13 Jul 2009 16:14:37 -0400
Subject: x86: Fix warning in pvclock.c

when building 32-bit, I see this ..
arch/x86/kernel/pvclock.c:63:7: warning: "__x86_64__" is not defined

Signed-off-by: Dave Jones <davej@redhat.com>
LKML-Reference: <20090713201437.GA12165@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/pvclock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 4f9c55f3a7c..03801f2f761 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -60,7 +60,7 @@ static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
 		"adc  %5,%%edx ; "
 		: "=A" (product), "=r" (tmp1), "=r" (tmp2)
 		: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
+#elif defined(__x86_64__)
 	__asm__ (
 		"mul %%rdx ; shrd $32,%%rdx,%%rax"
 		: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-- 
cgit v1.2.3


From 44ab9a6b0e909145d42615493952fe986b1ce5c2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 18:33:02 +0200
Subject: x86/oprofile: Rework and simplify nmi_cpu_setup()

This patch removes the function nmi_save_registers(). Per-cpu code is
now executed only in the function nmi_cpu_setup().  Also, it renames
the per-cpu function nmi_restore_registers() to
nmi_cpu_restore_registers().

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 93df76dd60f..25da1e17815 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -87,13 +87,6 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	}
 }
 
-static void nmi_save_registers(void *dummy)
-{
-	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-	nmi_cpu_save_registers(msrs);
-}
-
 static void free_msrs(void)
 {
 	int i;
@@ -137,6 +130,7 @@ static void nmi_cpu_setup(void *dummy)
 {
 	int cpu = smp_processor_id();
 	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+	nmi_cpu_save_registers(msrs);
 	spin_lock(&oprofilefs_lock);
 	model->setup_ctrs(model, msrs);
 	spin_unlock(&oprofilefs_lock);
@@ -182,13 +176,12 @@ static int nmi_setup(void)
 		}
 
 	}
-	on_each_cpu(nmi_save_registers, NULL, 1);
 	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
 	return 0;
 }
 
-static void nmi_restore_registers(struct op_msrs *msrs)
+static void nmi_cpu_restore_registers(struct op_msrs *msrs)
 {
 	struct op_msr *counters = msrs->counters;
 	struct op_msr *controls = msrs->controls;
@@ -220,7 +213,7 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
 	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
-	nmi_restore_registers(msrs);
+	nmi_cpu_restore_registers(msrs);
 }
 
 static void nmi_shutdown(void)
-- 
cgit v1.2.3


From 6e63ea4b0b14ff5fb8a3ca704fcda7d28b95f079 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 7 Jul 2009 19:25:39 +0200
Subject: x86/oprofile: Whitespaces changes only

This patch fixes whitespace changes of code that will be touched in
follow-on patches.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 12 ++++++------
 arch/x86/oprofile/op_model_amd.c  | 12 ++++++------
 arch/x86/oprofile/op_model_p4.c   |  8 ++++----
 arch/x86/oprofile/op_model_ppro.c |  8 ++++----
 4 files changed, 20 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 25da1e17815..fca8dc94531 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -516,12 +516,12 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	register_cpu_notifier(&oprofile_cpu_nb);
 #endif
 	/* default values, can be overwritten by model */
-	ops->create_files = nmi_create_files;
-	ops->setup = nmi_setup;
-	ops->shutdown = nmi_shutdown;
-	ops->start = nmi_start;
-	ops->stop = nmi_stop;
-	ops->cpu_type = cpu_type;
+	ops->create_files	= nmi_create_files;
+	ops->setup		= nmi_setup;
+	ops->shutdown		= nmi_shutdown;
+	ops->start		= nmi_start;
+	ops->stop		= nmi_stop;
+	ops->cpu_type		= cpu_type;
 
 	if (model->init)
 		ret = model->init(ops);
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 7ca8306aefa..f676f8825a3 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -91,7 +91,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	int i;
 
 	/* clear all counters */
-	for (i = 0 ; i < NUM_CONTROLS; ++i) {
+	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -229,7 +229,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	u64 val;
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
@@ -250,7 +250,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 {
 	u64 val;
 	int i;
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (reset_value[i]) {
 			rdmsrl(msrs->controls[i].addr, val);
 			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
@@ -270,7 +270,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	 * Subtle: stop on all counters to avoid race with setting our
 	 * pm callback
 	 */
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -285,11 +285,11 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
-	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 9db9e361182..5921b7fc724 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -558,7 +558,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* clear the cccrs we will use */
-	for (i = 0 ; i < num_counters ; i++) {
+	for (i = 0; i < num_counters; i++) {
 		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
@@ -575,7 +575,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* setup all counters */
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (counter_config[i].enabled && msrs->controls[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
@@ -678,7 +678,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(msrs->counters[i].addr);
 	}
@@ -687,7 +687,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 	 * conjunction with the counter registers (hence the starting offset).
 	 * This saves a few bits.
 	 */
-	for (i = num_counters ; i < num_controls ; ++i) {
+	for (i = num_counters; i < num_controls; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(msrs->controls[i].addr);
 	}
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index cd72d5c73b4..570d717c330 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -81,7 +81,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* clear all counters */
-	for (i = 0 ; i < num_counters; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -125,7 +125,7 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 	if (unlikely(!reset_value))
 		goto out;
 
-	for (i = 0 ; i < num_counters; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
@@ -188,11 +188,11 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
-- 
cgit v1.2.3


From 6b2b171a774af256082635b53ac387b1613b7b4c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 02:53:50 -0700
Subject: x86/acpi: acpi_parse_madt_ioapic_entries: remove redundant braces

We don't put braces around a single statement.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/acpi/boot.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a0285..ce31c1af854 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1179,9 +1179,8 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 	 * If MPS is present, it will handle them,
 	 * otherwise the system will stay in PIC mode
 	 */
-	if (acpi_disabled || acpi_noirq) {
+	if (acpi_disabled || acpi_noirq)
 		return -ENODEV;
-	}
 
 	if (!cpu_has_apic)
 		return -ENODEV;
-- 
cgit v1.2.3


From 2f210deba9887dd9143b63b217506f1ac152e91c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 02:55:22 -0700
Subject: x86/ioapic.c: ioapic_modify_irq is too large to inline

If ioapic_modify_irq() is marked inline, it gets inlined several times.
Un-inlining it saves around 200 bytes in .text for me.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 90b5e6efa93..82271eb87bb 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -556,9 +556,9 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 		add_pin_to_irq_node(cfg, node, newapic, newpin);
 }
 
-static inline void io_apic_modify_irq(struct irq_cfg *cfg,
-				int mask_and, int mask_or,
-				void (*final)(struct irq_pin_list *entry))
+static void io_apic_modify_irq(struct irq_cfg *cfg,
+			       int mask_and, int mask_or,
+			       void (*final)(struct irq_pin_list *entry))
 {
 	int pin;
 	struct irq_pin_list *entry;
-- 
cgit v1.2.3


From 890aeacf64c55a7ada7054a140d249ab13899f2d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 02:57:43 -0700
Subject: x86/ioapic.c: unify __mask_IO_APIC_irq()

The main difference between 32 and 64-bit __mask_IO_APIC_irq() does a
readback from the I/O APIC to synchronize it.

If there's a hardware requirement to do a readback sync after updating
an APIC register, then it will be a hardware requrement regardless of
whether the kernel is compiled 32 or 64-bit.

Unify __mask_IO_APIC_irq() using the 64-bit version which always syncs
with io_apic_sync().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 82271eb87bb..f8aa5461071 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -580,7 +580,6 @@ static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
 }
 
-#ifdef CONFIG_X86_64
 static void io_apic_sync(struct irq_pin_list *entry)
 {
 	/*
@@ -596,12 +595,8 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
 {
 	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 }
-#else /* CONFIG_X86_32 */
-static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
-}
 
+#ifdef CONFIG_X86_32
 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
 {
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
-- 
cgit v1.2.3


From 916a0fe739f151664f7f07b42543ae6fd4caec49 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:00:22 -0700
Subject: x86/ioapic.c: remove #ifdef for 82093AA workaround

While no 64-bit hardware will have a version 0x11 I/O APIC which needs
the level/edge bug workaround, that's not a particular reason to use
CONFIG_X86_32 to #ifdef the code out.  Most 32-bit machines will no
longer need the workaround either, so the test to see whether it is
necessary should be more fine-grained than "32-bit=yes, 64-bit=no".

(Also fix formatting of block comment.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 47 +++++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index f8aa5461071..1a341444258 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -596,7 +596,6 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
 	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 }
 
-#ifdef CONFIG_X86_32
 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
 {
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
@@ -608,7 +607,6 @@ static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
 			IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
 }
-#endif /* CONFIG_X86_32 */
 
 static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
 {
@@ -2510,11 +2508,8 @@ atomic_t irq_mis_count;
 static void ack_apic_level(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
-
-#ifdef CONFIG_X86_32
 	unsigned long v;
 	int i;
-#endif
 	struct irq_cfg *cfg;
 	int do_unmask_irq = 0;
 
@@ -2527,31 +2522,28 @@ static void ack_apic_level(unsigned int irq)
 	}
 #endif
 
-#ifdef CONFIG_X86_32
 	/*
-	* It appears there is an erratum which affects at least version 0x11
-	* of I/O APIC (that's the 82093AA and cores integrated into various
-	* chipsets).  Under certain conditions a level-triggered interrupt is
-	* erroneously delivered as edge-triggered one but the respective IRR
-	* bit gets set nevertheless.  As a result the I/O unit expects an EOI
-	* message but it will never arrive and further interrupts are blocked
-	* from the source.  The exact reason is so far unknown, but the
-	* phenomenon was observed when two consecutive interrupt requests
-	* from a given source get delivered to the same CPU and the source is
-	* temporarily disabled in between.
-	*
-	* A workaround is to simulate an EOI message manually.  We achieve it
-	* by setting the trigger mode to edge and then to level when the edge
-	* trigger mode gets detected in the TMR of a local APIC for a
-	* level-triggered interrupt.  We mask the source for the time of the
-	* operation to prevent an edge-triggered interrupt escaping meanwhile.
-	* The idea is from Manfred Spraul.  --macro
-	*/
+	 * It appears there is an erratum which affects at least version 0x11
+	 * of I/O APIC (that's the 82093AA and cores integrated into various
+	 * chipsets).  Under certain conditions a level-triggered interrupt is
+	 * erroneously delivered as edge-triggered one but the respective IRR
+	 * bit gets set nevertheless.  As a result the I/O unit expects an EOI
+	 * message but it will never arrive and further interrupts are blocked
+	 * from the source.  The exact reason is so far unknown, but the
+	 * phenomenon was observed when two consecutive interrupt requests
+	 * from a given source get delivered to the same CPU and the source is
+	 * temporarily disabled in between.
+	 *
+	 * A workaround is to simulate an EOI message manually.  We achieve it
+	 * by setting the trigger mode to edge and then to level when the edge
+	 * trigger mode gets detected in the TMR of a local APIC for a
+	 * level-triggered interrupt.  We mask the source for the time of the
+	 * operation to prevent an edge-triggered interrupt escaping meanwhile.
+	 * The idea is from Manfred Spraul.  --macro
+	 */
 	cfg = desc->chip_data;
 	i = cfg->vector;
-
 	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-#endif
 
 	/*
 	 * We must acknowledge the irq before we move it or the acknowledge will
@@ -2593,7 +2585,7 @@ static void ack_apic_level(unsigned int irq)
 		unmask_IO_APIC_irq_desc(desc);
 	}
 
-#ifdef CONFIG_X86_32
+	/* Tail end of version 0x11 I/O APIC bug workaround */
 	if (!(v & (1 << (i & 0x1f)))) {
 		atomic_inc(&irq_mis_count);
 		spin_lock(&ioapic_lock);
@@ -2601,7 +2593,6 @@ static void ack_apic_level(unsigned int irq)
 		__unmask_and_level_IO_APIC_irq(cfg);
 		spin_unlock(&ioapic_lock);
 	}
-#endif
 }
 
 #ifdef CONFIG_INTR_REMAP
-- 
cgit v1.2.3


From 83c21bedf63ce92a2dd82ae2c7a96179b0aa4372 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:13:04 -0700
Subject: x86/ioapic.c: remove redundant declaration of irq_pin_list

The structure is defined immediately below, so there's no need
to forward declare it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 1a341444258..ec52e0c045c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -116,8 +116,6 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
-struct irq_pin_list;
-
 /*
  * This is performance-critical, we want to do it O(1)
  *
-- 
cgit v1.2.3


From 8e13d697febc1ba17e70ed88789255c8bc25aa41 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:14:59 -0700
Subject: x86/ioapic.c: move lost comment to what seems like appropriate place

The comment got separated from its subject, so move it to what
appears to be the right place, and update to describe the current
structure.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index ec52e0c045c..a097a773bc7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -116,13 +116,6 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
 struct irq_pin_list {
 	int apic, pin;
 	struct irq_pin_list *next;
@@ -137,6 +130,11 @@ static struct irq_pin_list *get_one_free_irq_2_pin(int node)
 	return pin;
 }
 
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * Most irqs are mapped 1:1 with pins.
+ */
 struct irq_cfg {
 	struct irq_pin_list *irq_2_pin;
 	cpumask_var_t domain;
-- 
cgit v1.2.3


From d8c52063ed85dda61b70bc05b90711478db5dc17 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:17:58 -0700
Subject: x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for()
 loop

Convert the unconventional loop in io_apic_level_ack_pending() to
a conventional for() loop.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index a097a773bc7..0d0401802d4 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -410,13 +410,10 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	entry = cfg->irq_2_pin;
-	for (;;) {
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		unsigned int reg;
 		int pin;
 
-		if (!entry)
-			break;
 		pin = entry->pin;
 		reg = io_apic_read(entry->apic, 0x10 + pin*2);
 		/* Is the remote IRR bit set? */
@@ -424,9 +421,6 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 			spin_unlock_irqrestore(&ioapic_lock, flags);
 			return true;
 		}
-		if (!entry->next)
-			break;
-		entry = entry->next;
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
-- 
cgit v1.2.3


From 875e68ec32fc5495f3edf987aaae1c52306184b7 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:24:11 -0700
Subject: x86/ioapic.c: simplify add_pin_to_irq_node()

Rather than duplicating the same alloc/init code twice, restructure
the function to look for duplicates and then add an entry
if none is found.

This function is not performance critical; all but one of its callers
are __init functions, and the non-__init caller is for PCI device setup.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 0d0401802d4..d9e8f19088d 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -490,34 +490,22 @@ static void ioapic_mask_entry(int apic, int pin)
  */
 static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
 {
-	struct irq_pin_list *entry;
+	struct irq_pin_list **entryp, *entry;
 
-	entry = cfg->irq_2_pin;
-	if (!entry) {
-		entry = get_one_free_irq_2_pin(node);
-		if (!entry) {
-			printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
-					apic, pin);
-			return;
-		}
-		cfg->irq_2_pin = entry;
-		entry->apic = apic;
-		entry->pin = pin;
-		return;
-	}
-
-	while (entry->next) {
+	for (entryp = &cfg->irq_2_pin;
+	     *entryp != NULL;
+	     entryp = &(*entryp)->next) {
+		entry = *entryp;
 		/* not again, please */
 		if (entry->apic == apic && entry->pin == pin)
 			return;
-
-		entry = entry->next;
 	}
 
-	entry->next = get_one_free_irq_2_pin(node);
-	entry = entry->next;
+	entry = get_one_free_irq_2_pin(node);
 	entry->apic = apic;
 	entry->pin = pin;
+
+	*entryp = entry;
 }
 
 /*
-- 
cgit v1.2.3


From 535b64291a9d1ff8bc54642494a5fce27e1e1170 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:29:26 -0700
Subject: x86/ioapic.c: convert replace_pin_at_irq_node to conventional for()
 loop

Use a conventional for() loop in replace_pin_at_irq_node().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d9e8f19088d..9386976b675 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -515,10 +515,10 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 				      int oldapic, int oldpin,
 				      int newapic, int newpin)
 {
-	struct irq_pin_list *entry = cfg->irq_2_pin;
+	struct irq_pin_list *entry;
 	int replaced = 0;
 
-	while (entry) {
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
@@ -526,7 +526,6 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 			/* every one is different, right? */
 			break;
 		}
-		entry = entry->next;
 	}
 
 	/* why? call replace before add? */
-- 
cgit v1.2.3


From 4eea6fff612f54380dd642b045bf03ac0613fe3e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:32:15 -0700
Subject: x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments

There's no need for a control variable in replace_pin_at_irq_node();
it can just return if it finds the old apic/pin to replace.

If the loop terminates, then it didn't find the old apic/pin, so it can
add the new ones.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9386976b675..8245e62ed93 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -512,25 +512,22 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin
  * Reroute an IRQ to a different pin.
  */
 static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
-				      int oldapic, int oldpin,
-				      int newapic, int newpin)
+					   int oldapic, int oldpin,
+					   int newapic, int newpin)
 {
 	struct irq_pin_list *entry;
-	int replaced = 0;
 
 	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
-			replaced = 1;
 			/* every one is different, right? */
-			break;
+			return;
 		}
 	}
 
-	/* why? call replace before add? */
-	if (!replaced)
-		add_pin_to_irq_node(cfg, node, newapic, newpin);
+	/* old apic/pin didn't exist, so just add new ones */
+	add_pin_to_irq_node(cfg, node, newapic, newpin);
 }
 
 static void io_apic_modify_irq(struct irq_cfg *cfg,
-- 
cgit v1.2.3


From 638f2f8c52a92c15ebda9e50d84c1ab56fc42e42 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:37:52 -0700
Subject: x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop

Use a normal for() loop in __target_IO_APIC_irq().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 8245e62ed93..17883cd8259 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2236,13 +2236,9 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
 	struct irq_pin_list *entry;
 	u8 vector = cfg->vector;
 
-	entry = cfg->irq_2_pin;
-	for (;;) {
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		unsigned int reg;
 
-		if (!entry)
-			break;
-
 		apic = entry->apic;
 		pin = entry->pin;
 		/*
@@ -2255,9 +2251,6 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
 		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
 		reg |= vector;
 		io_apic_modify(apic, 0x10 + pin*2, reg);
-		if (!entry->next)
-			break;
-		entry = entry->next;
 	}
 }
 
-- 
cgit v1.2.3


From e25371d60cb06a44d7a32d7966ab9bfbeacb9390 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:49:01 -0700
Subject: x86/ioapic.c: unify ioapic_retrigger_irq()

The 32 and 64-bit versions of ioapic_retrigger_irq() are identical
except the 64-bit one takes vector_lock.  vector_lock is defined and
used on 32-bit too, so just use a common ioapic_retrigger_irq().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 17883cd8259..cf51b0b58c5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2178,7 +2178,6 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 	return was_pending;
 }
 
-#ifdef CONFIG_X86_64
 static int ioapic_retrigger_irq(unsigned int irq)
 {
 
@@ -2191,14 +2190,6 @@ static int ioapic_retrigger_irq(unsigned int irq)
 
 	return 1;
 }
-#else
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-	apic->send_IPI_self(irq_cfg(irq)->vector);
-
-	return 1;
-}
-#endif
 
 /*
  * Level and edge triggered IO-APIC interrupts need different handling,
-- 
cgit v1.2.3


From 872fb6dd6b07986417964e089074e7acfd025f4c Mon Sep 17 00:00:00 2001
From: Fenghua Yu <fenghua.yu@intel.com>
Date: Mon, 13 Jul 2009 13:09:43 -0700
Subject: ia64: Fix setup_per_cpu_areas() compilation error

Fix ia64 build setup_per_cpu_areas() redifinition issue in UP
configuration.  When compiling ia64 kernel in UP configuration, the
following compilation errors are reported:

arch/ia64/kernel/setup.c:860: error: redefinition of 'setup_per_cpu_areas'
include/linux/percpu.h:185: error: previous definition of 'setup_per_cpu_areas' was here

The patch fixes the issue in arch/ia64/kernel/setup.c

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/ia64/kernel/setup.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 1b23ec126b6..1de86c96801 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -855,11 +855,17 @@ identify_cpu (struct cpuinfo_ia64 *c)
 	c->unimpl_pa_mask = ~((1L<<63) | ((1L << phys_addr_size) - 1));
 }
 
+/*
+ * In UP configuration, setup_per_cpu_areas() is defined in
+ * include/linux/percpu.h
+ */
+#ifdef CONFIG_SMP
 void __init
 setup_per_cpu_areas (void)
 {
 	/* start_kernel() requires this... */
 }
+#endif
 
 /*
  * Do the following calculations:
-- 
cgit v1.2.3


From 28477fb1ed1a00c67b382ae8f37f35708e3bf5dd Mon Sep 17 00:00:00 2001
From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Date: Wed, 8 Jul 2009 13:46:18 +0000
Subject: powerpc: Fix booke user_disable_single_step()

On booke processors, gdb is seeing spurious SIGTRAPs when setting a
watchpoint.

user_disable_single_step() simply quits when the DAC is non-zero.  It should
be clearing the DBCR0_IC and DBCR0_BT bits from the dbcr0 register and
TIF_SINGLESTEP from the thread flag.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/ptrace.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 9fa2c7dcd05..ef149880c14 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -736,15 +736,16 @@ void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
-
-#if defined(CONFIG_BOOKE)
-	/* If DAC then do not single step, skip */
-	if (task->thread.dabr)
-		return;
-#endif
-
 	if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
+		/* If DAC don't clear DBCRO_IDM or MSR_DE */
+		if (task->thread.dabr)
+			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
+		else {
+			task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
+			regs->msr &= ~MSR_DE;
+		}
+#elif defined(CONFIG_40x)
 		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
-- 
cgit v1.2.3


From 0115cb544b0a6709e9cf3de615e150d22e7d9d10 Mon Sep 17 00:00:00 2001
From: Andreas Schwab <schwab@linux-m68k.org>
Date: Fri, 10 Jul 2009 11:17:36 +0000
Subject: powerpc: Fix another bug in move of altivec code to vector.S

When moving load_up_altivec to vector.S a typo in a comment caused a
thinko setting the wrong variable.

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vector.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ef36cbbc588..ea4d64644d0 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -80,10 +80,10 @@ _GLOBAL(load_up_altivec)
 	mtvscr	vr0
 	REST_32VRS(0,r4,r5)
 #ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
+	/* Update last_task_used_altivec to 'current' */
 	subi	r4,r5,THREAD		/* Back to 'current' */
 	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_math)(r3)
+	PPC_STL	r4,ADDROFF(last_task_used_altivec)(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	blr
@@ -172,7 +172,7 @@ _GLOBAL(load_up_vsx)
 	oris	r12,r12,MSR_VSX@h
 	std	r12,_MSR(r1)
 #ifndef CONFIG_SMP
-	/* Update last_task_used_math to 'current' */
+	/* Update last_task_used_vsx to 'current' */
 	ld	r4,PACACURRENT(r13)
 	std	r4,0(r3)
 #endif /* CONFIG_SMP */
-- 
cgit v1.2.3


From 1dacc76d0014a034b8aca14237c127d7c19d7726 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 1 Jul 2009 11:26:02 +0000
Subject: net/compat/wext: send different messages to compat tasks

Wireless extensions have the unfortunate problem that events
are multicast netlink messages, and are not independent of
pointer size. Thus, currently 32-bit tasks on 64-bit platforms
cannot properly receive events and fail with all kinds of
strange problems, for instance wpa_supplicant never notices
disassociations, due to the way the 64-bit event looks (to a
32-bit process), the fact that the address is all zeroes is
lost, it thinks instead it is 00:00:00:00:01:00.

The same problem existed with the ioctls, until David Miller
fixed those some time ago in an heroic effort.

A different problem caused by this is that we cannot send the
ASSOCREQIE/ASSOCRESPIE events because sending them causes a
32-bit wpa_supplicant on a 64-bit system to overwrite its
internal information, which is worse than it not getting the
information at all -- so we currently resort to sending a
custom string event that it then parses. This, however, has a
severe size limitation we are frequently hitting with modern
access points; this limitation would can be lifted after this
patch by sending the correct binary, not custom, event.

A similar problem apparently happens for some other netlink
users on x86_64 with 32-bit tasks due to the alignment for
64-bit quantities.

In order to fix these problems, I have implemented a way to
send compat messages to tasks. When sending an event, we send
the non-compat event data together with a compat event data in
skb_shinfo(main_skb)->frag_list. Then, when the event is read
from the socket, the netlink code makes sure to pass out only
the skb that is compatible with the task. This approach was
suggested by David Miller, my original approach required
always sending two skbs but that had various small problems.

To determine whether compat is needed or not, I have used the
MSG_CMSG_COMPAT flag, and adjusted the call path for recv and
recvfrom to include it, even if those calls do not have a cmsg
parameter.

I have not solved one small part of the problem, and I don't
think it is necessary to: if a 32-bit application uses read()
rather than any form of recvmsg() it will still get the wrong
(64-bit) event. However, neither do applications actually do
this, nor would it be a regression.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/mips/kernel/scall64-n32.S | 2 +-
 arch/mips/kernel/scall64-o32.S | 4 ++--
 arch/sparc/kernel/sys32.S      | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 15874f9812c..7c4a94f4370 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -164,7 +164,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_connect
 	PTR	sys_accept
 	PTR	sys_sendto
-	PTR	sys_recvfrom
+	PTR	compat_sys_recvfrom
 	PTR	compat_sys_sendmsg		/* 6045 */
 	PTR	compat_sys_recvmsg
 	PTR	sys_shutdown
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 781e0f1e953..821fc978673 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -378,8 +378,8 @@ sys_call_table:
 	PTR	sys_getsockname
 	PTR	sys_getsockopt
 	PTR	sys_listen
-	PTR	sys_recv			/* 4175 */
-	PTR	sys_recvfrom
+	PTR	compat_sys_recv			/* 4175 */
+	PTR	compat_sys_recvfrom
 	PTR	compat_sys_recvmsg
 	PTR	sys_send
 	PTR	compat_sys_sendmsg
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index f061c4dda9e..3762f6c7894 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -121,7 +121,7 @@ SIGN2(sys32_syslog, sys_syslog, %o0, %o2)
 SIGN1(sys32_umask, sys_umask, %o0)
 SIGN3(sys32_tgkill, sys_tgkill, %o0, %o1, %o2)
 SIGN1(sys32_sendto, sys_sendto, %o0)
-SIGN1(sys32_recvfrom, sys_recvfrom, %o0)
+SIGN1(sys32_recvfrom, compat_sys_recvfrom, %o0)
 SIGN3(sys32_socket, sys_socket, %o0, %o1, %o2)
 SIGN2(sys32_connect, sys_connect, %o0, %o2)
 SIGN2(sys32_bind, sys_bind, %o0, %o2)
-- 
cgit v1.2.3


From 1997660cea28202ece0956cd44f332ac57700138 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Wed, 17 Jun 2009 15:18:18 +0000
Subject: Blackfin: cleanup code a bit with comments and defines

Improve the assembly with a few explanatory comments and use symbolic
defines rather than numeric values for bit positions.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-common/entry.S | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 5a4e7c7fd92..fb1795d5be2 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -218,7 +218,7 @@ ENTRY(_ex_single_step)
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);
 	syscfg = R7;
 	jump _ex_trap_c;
 
@@ -251,7 +251,7 @@ ENTRY(_ex_single_step)
 	if !cc jump _bfin_return_from_exception;
 
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);	/* Turn off single step */
 	syscfg = R7;
 
 	/* Fall through to _bfin_return_from_exception.  */
@@ -342,9 +342,11 @@ ENTRY(_ex_trap_c)
 	r6 = retx;
 	[p5 + PDA_RETX] = r6;
 #endif
+	/* Save the state of single stepping */
 	r6 = SYSCFG;
 	[p5 + PDA_SYSCFG] = r6;
-	BITCLR(r6, 0);
+	/* Clear it while we handle the exception in IRQ5 mode */
+	BITCLR(r6, SYSCFG_SSSTEP_P);
 	SYSCFG = r6;
 
 	/* Disable all interrupts, but make sure level 5 is enabled so
@@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c)
  * exception. This is a unrecoverable event, so crash.
  * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
  */
-_double_fault:
+ENTRY(_double_fault)
 	/* Turn caches & protection off, to ensure we don't get any more
 	 * double exceptions
 	 */
@@ -872,7 +874,7 @@ ENTRY(_ret_from_exception)
 	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
-	bitclr(r0, 0);
+	bitclr(r0, SYSCFG_SSSTEP_P);		/* Turn off single step */
 	syscfg = r0;
 5:
 	rts;
-- 
cgit v1.2.3


From b2dc0a08845af9d6ea990a1a28d4545998707570 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Sat, 20 Jun 2009 15:36:09 -0400
Subject: Blackfin: drop dead flash_probe call

There are no CONFIG_{BLK,CHR}_DEV_FLASH Kconfig options, and there is no
flash_probe() function, so not really sure what this code is all about.
Seems to be dead code that stretches way back to the start of the Blackfin
port.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/setup.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6136c33e919..6e150d9b886 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -868,13 +868,6 @@ void __init setup_arch(char **cmdline_p)
 	else
 		printk(KERN_CONT "and Disabled\n");
 
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
-	/* we need to initialize the Flashrom device here since we might
-	 * do things with flash early on in the boot
-	 */
-	flash_probe();
-#endif
-
 	printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
 
 	/* Newer parts mirror SWRST bits in SYSCR */
-- 
cgit v1.2.3


From 976119bc5d2253bb47f3255ee178ce1ee605fd3c Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Wed, 1 Jul 2009 07:05:40 +0000
Subject: Blackfin: update anomaly lists to match latest sheets/usage

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf518/include/mach/anomaly.h | 2 ++
 arch/blackfin/mach-bf527/include/mach/anomaly.h | 4 +++-
 arch/blackfin/mach-bf533/include/mach/anomaly.h | 1 +
 arch/blackfin/mach-bf537/include/mach/anomaly.h | 2 ++
 arch/blackfin/mach-bf538/include/mach/anomaly.h | 2 ++
 arch/blackfin/mach-bf548/include/mach/anomaly.h | 2 ++
 arch/blackfin/mach-bf561/include/mach/anomaly.h | 1 +
 7 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 426e064062a..753ed810e1c 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -82,6 +82,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -117,6 +118,7 @@
 #define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 0d63f740616..c438ca89d8c 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -176,6 +176,8 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -201,6 +203,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -238,6 +241,5 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 70a0ad69c61..cd83db2fb1a 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -335,6 +335,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 57c128cc3b6..e66aa131f51 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -167,6 +167,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -186,6 +187,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index c97acdf85cd..451cf8a82a4 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -137,6 +137,7 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -160,6 +161,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 18a4cd24f67..cd040fe0bc5 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -195,6 +195,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -226,6 +227,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 94b8e277f09..a5312b2d267 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -288,6 +288,7 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
-- 
cgit v1.2.3


From 0e4edcf0b0f7d96c4be7788b13bee82e4d3ba0ce Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Mon, 22 Jun 2009 20:23:48 +0000
Subject: Blackfin: work around anomaly 05000281

Add missing anomaly workaround for anomaly 05000281 - we can't return to
instructions which cause hardware errors otherwise we trigger the error
again which means we go into an infinite loop of handling, returning, and
retriggering.  This work around confuses gdb when the error occurs as the
PC will seemed to have moved, so a better long term fix will need to be
figured out, but for now this is better than an infinite crash loop.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/traps.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8a1caf2bb5b..664de56296c 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -619,7 +619,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
-	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+		(ANOMALY_05000281 && trapnr == VEC_HWERR))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
  traps_done:
-- 
cgit v1.2.3


From 15627bd35c6f02d159e0cb41d287dcba3a23a135 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Tue, 23 Jun 2009 11:21:34 +0000
Subject: Blackfin: restore exception banner when dumping crash info

Previous unification code put the exception banner behind the "is oops"
logic when it should have been printed all the time.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/traps.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 664de56296c..9efac0f2e2c 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	if (kernel_mode_regs(fp) || (current && !current->mm)) {
 		console_verbose();
 		oops_in_progress = 1;
-		if (strerror)
-			verbose_printk(strerror);
 	}
 
 	if (sig != SIGTRAP) {
+		if (strerror)
+			verbose_printk(strerror);
+
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
-- 
cgit v1.2.3


From dc437b1b596e310bb583de3868c3d61a6798c81c Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Fri, 26 Jun 2009 12:23:51 +0000
Subject: Blackfin: fix silent crash when no uClinux MTD filesystem exists

Since we need to relocate the attached filesystem with the uClinux MTD map
(to handle some anomalies), we need to know its real filesize.  If we boot
a kernel without a filesystem actually attached, we end up blindly reading
and copying garbage (since there is no magic value to detect validity).
Often times this results in an early crash and no output.  So add a few
basic sanity checks before operating on things to catch the majority of
cases.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/setup.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6e150d9b886..e4d2da7c1c9 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -568,17 +568,23 @@ static __init void memory_setup(void)
 #  endif				/* ANOMALY_05000263 */
 # endif				/* CONFIG_ROMFS_FS */
 
-	memory_end -= mtd_size;
-
-	if (mtd_size == 0) {
-		console_init();
-		panic("Don't boot kernel without rootfs attached.");
+	/* Since the default MTD_UCLINUX has no magic number, we just blindly
+	 * read 8 past the end of the kernel's image, and look at it.
+	 * When no image is attached, mtd_size is set to a random number
+	 * Do some basic sanity checks before operating on things
+	 */
+	if (mtd_size == 0 || memory_end <= mtd_size) {
+		pr_emerg("Could not find valid ram mtd attached.\n");
+	} else {
+		memory_end -= mtd_size;
+
+		/* Relocate MTD image to the top of memory after the uncached memory area */
+		uclinux_ram_map.phys = memory_mtd_start = memory_end;
+		uclinux_ram_map.size = mtd_size;
+		pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+			_end, mtd_size, (void *)memory_mtd_start);
+		dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 	}
-
-	/* Relocate MTD image to the top of memory after the uncached memory area */
-	uclinux_ram_map.phys = memory_mtd_start = memory_end;
-	uclinux_ram_map.size = mtd_size;
-	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
-- 
cgit v1.2.3


From 8399a74f61c69c7d233924de3dd314ca0effa16a Mon Sep 17 00:00:00 2001
From: Jie Zhang <jie.zhang@analog.com>
Date: Sun, 28 Jun 2009 13:19:36 +0000
Subject: Blackfin: fix miscompilation in lshrdi3

The code used in the Blackfin lshrdi3 utilizes gcc constructs.  However,
the structures declared don't line up with the code gcc generates, so
under certain optimizations, we get bad code and things crap out in fun
random ways.  So rather than trying to maintain different gcc definitions
ourselves, just use the ones available in gcclib.h.

URL: http://blackfin.uclinux.org/gf/tracker/5286
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/lib/lshrdi3.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
index 84b9c559222..e57bf6fbdf3 100644
--- a/arch/blackfin/lib/lshrdi3.c
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -27,21 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
-	SItype high, low;
-};
-
-typedef union {
-	struct DIstruct s;
-	DItype ll;
-} DIunion;
+#include "gcclib.h"
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
-- 
cgit v1.2.3


From fb4b5d3a379824d94fd71fc1aa78e9dbcb15b948 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 29 Jun 2009 14:20:10 -0400
Subject: Blackfin: handle BF561 Core B memory regions better when SMP=n

Rather than assume Core B is always run with caches turned on, let people
load into any of the on-chip memory regions.  It is their business how the
SRAM/Cache regions are utilized, so don't prevent them from being able to
load into them.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/process.c                  | 14 +++++++-------
 arch/blackfin/mach-bf561/include/mach/mem_map.h | 23 ++++++++++++++++++++++-
 2 files changed, 29 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 79cad0ac589..9da36bab7cc 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -361,7 +361,7 @@ static inline
 int in_mem_const(unsigned long addr, unsigned long size,
                  unsigned long const_addr, unsigned long const_size)
 {
-	return in_mem_const_off(addr, 0, size, const_addr, const_size);
+	return in_mem_const_off(addr, size, 0, const_addr, const_size);
 }
 #define IN_ASYNC(bnum, bctlnum) \
 ({ \
@@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size)
 	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #endif
 	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size)
 	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return 1;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return 1;
 #endif
 	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index a63e15c86d9..5b96ea549a0 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -37,7 +37,6 @@
 
 /* Memory Map for ADSP-BF561 processors */
 
-#ifdef CONFIG_BF561
 #define COREA_L1_CODE_START       0xFFA00000
 #define COREA_L1_DATA_A_START     0xFF800000
 #define COREA_L1_DATA_B_START     0xFF900000
@@ -74,6 +73,28 @@
 #define BFIN_DCACHESIZE	(0*1024)
 #define BFIN_DSUPBANKS	0
 #endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A.  If we aren't, then we assume Core B is not
+ * using any cache.  This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler.  Easier to check one region than a
+ * bunch of small ones.  Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH     L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH   L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH   L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH     0x14000
+# define COREB_L1_DATA_A_LENGTH   0x8000
+# define COREB_L1_DATA_B_LENGTH   0x8000
 #endif
 
 /* Level 2 Memory */
-- 
cgit v1.2.3


From 532f07ca04c6f8ab0555b00cf5d42dc6f72b802f Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 29 Jun 2009 22:45:50 +0000
Subject: Blackfin: fix early_dma_memcpy() handling of busy channels

The early logic to locate a free DMA channel and then set it up was broken
in a few ways that only manifested itself when we needed to set up more
than 2 on chip SRAM regions (most board defaults setup 1 or 2).  First, we
checked the wrong status register (the destination gets updated, not the
source) and second, we did the ssync before rather than after resetting a
DMA config register.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/bfin_dma_5xx.c | 29 ++++++++++++++---------------
 1 file changed, 14 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index e0bf8cc0690..9f9b8281665 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 	BUG_ON(src % 4);
 	BUG_ON(size % 4);
 
-	/* Force a sync in case a previous config reset on this channel
-	 * occurred.  This is needed so subsequent writes to DMA registers
-	 * are not spuriously lost/corrupted.
-	 */
-	__builtin_bfin_ssync();
-
 	src_ch = 0;
 	/* Find an avalible memDMA channel */
 	while (1) {
-		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
-			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
-		} else {
+		if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
 			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
 			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
 		}
 
-		if (!bfin_read16(&src_ch->cfg)) {
+		if (!bfin_read16(&src_ch->cfg))
+			break;
+		else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+			bfin_write16(&src_ch->cfg, 0);
 			break;
-		} else {
-			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
-				bfin_write16(&src_ch->cfg, 0);
 		}
-
 	}
 
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
 	/* Destination */
 	bfin_write32(&dst_ch->start_addr, dst);
 	bfin_write16(&dst_ch->x_count, size >> 2);
-- 
cgit v1.2.3


From 10a5ecd03f9f5c374f954cf50a4f85d73f8ce338 Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Wed, 1 Jul 2009 04:08:01 +0000
Subject: Blackfin: update handling of anomaly 364 (wrong rev id in BF527-0.1)

This anomaly only applies to the BF527-0.1, not the BF526-0.1, and not any
other revision of the BF527.  So make sure we don't go returning 0xffff
for other cases.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/processor.h | 21 +++++++--------------
 1 file changed, 7 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index d0be99be830..a36ad8dac06 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void)
 	/* Always use CHIPID, to work around ANOMALY_05000234 */
 	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
-#ifdef CONFIG_BF52x
-	/* ANOMALY_05000357
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+	/*
+	 * ANOMALY_05000364
 	 * Incorrect Revision Number in DSPID Register
 	 */
-	if (revid == 0)
-		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
-		case 0x0010:
-			revid = 0;
-			break;
-		case 0x2796:
-			revid = 1;
-			break;
-		default:
-			revid = 0xFFFF;
-			break;
-		}
+	if (ANOMALY_05000364 &&
+	    bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+		revid = 1;
 #endif
+
 	return revid;
 }
 
-- 
cgit v1.2.3


From f1c717fbf89f5a24d539ecf4baa5d4c3888e3bf9 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Wed, 1 Jul 2009 07:43:23 +0000
Subject: Blackfin: fix wrong CTS inversion

The Blackfin serial headers were inverting the CTS value leading to wrong
handling of the CTS line which broke CTS/RTS handling completely.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index 0fb2ce5d840..dbade93395e 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a625659dd67..ebd6cebc1fb 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index a3789d7ccf8..4062e24e759 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b86662fb9de..e95d54f9af6 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index c536551eb4b..999f239fe1a 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index a1b50878553..fd5e8878b8c 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
-- 
cgit v1.2.3


From ebd5833327e3fb46eb55553d8f5432b5226bf897 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 2 Jul 2009 11:00:38 +0000
Subject: Blackfin: fix incomplete renaming of the bfin-twi-lcd driver

The sed used to rename the bfin-twi-lcd only replaced the first instance
rather than all which led to the resources not being enabled when the
driver was built as a module.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf518/boards/ezbrd.c    | 2 +-
 arch/blackfin/mach-bf527/boards/cm_bf527.c | 2 +-
 arch/blackfin/mach-bf527/boards/ezbrd.c    | 2 +-
 arch/blackfin/mach-bf527/boards/ezkit.c    | 2 +-
 arch/blackfin/mach-bf533/boards/stamp.c    | 2 +-
 arch/blackfin/mach-bf537/boards/stamp.c    | 2 +-
 arch/blackfin/mach-bf548/boards/ezkit.c    | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d9791106be9..809be268e42 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f4867ce0c61..b09484f538f 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index b2f30f06b73..2ad68cd10ae 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 799a1d1fa89..75e563d3f9d 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a68ade8a3ca..3d743ccaff6 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c1f76dd2c4e..ab92e42f891 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1316,7 +1316,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF5,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 81f5b95cc36..dc0dd9b2bce 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
-- 
cgit v1.2.3


From 3a920accbb5f88d753ab5a6a47d0dd48b6269f84 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Mon, 6 Jul 2009 14:29:08 +0000
Subject: Blackfin: drop duplicate runtime checking of anomaly 05000448

We already catch this anomaly at compile time, and the runtime version is
such that it ends up checking on all parts rather than just the ones that
might actually have it.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/setup.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index e4d2da7c1c9..98c2f79afda 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -937,10 +937,6 @@ void __init setup_arch(char **cmdline_p)
 			       CPU, bfin_revid());
 	}
 
-	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
-	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448");
-
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
-- 
cgit v1.2.3


From ad863a9dc9887330b2ab753323063865c59d8db6 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Tue, 7 Jul 2009 02:47:14 +0000
Subject: Blackfin: fix handling of IPEND in interrupt context save

The interrupt context save logic incorrectly stored the address of the
IPEND register rather than its value due to a missing dereference.  While
we're here, also enable this code for all kernel debugging scenarios and
not just when KGDB is enabled.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/context.S | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 16561ab18b3..f8a664f022b 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -223,9 +223,10 @@
 	[--sp] = RETN;
 	[--sp] = RETE;
 	[--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
-	r1.l = lo(IPEND);
-	r1.h = hi(IPEND);
+#ifdef CONFIG_DEBUG_KERNEL
+	p1.l = lo(IPEND);
+	p1.h = hi(IPEND);
+	r1 = [p1];
 	[--sp] = r1;
 #else
 	[--sp] = r0;	/* Skip IPEND as well. */
-- 
cgit v1.2.3


From 4c94c3e09adba9718218d6e3d35b2dfae81f3911 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Tue, 7 Jul 2009 07:41:50 +0000
Subject: Blackfin: bf537-stamp: fix irq decl for AD7142

The AD7142 add-on card hooks the IRQ line up to PG5, not PF5.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ab92e42f891..bd656907b8c 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1313,7 +1313,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-		.irq = IRQ_PF5,
+		.irq = IRQ_PG5,
 	},
 #endif
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
-- 
cgit v1.2.3


From c03c2a87347b849ec927d7d2ea79a6955e19f492 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Wed, 8 Jul 2009 12:04:43 +0000
Subject: Blackfin: fix bugs in GPIO resume code

Change the bfin_gpio_pm_hibernate_restore() function to:
1) AND restored DATA with DIR (not OR) to get correct final state
2) Restore DATA before setting DIR to avoid glitches

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/bfin_gpio.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index beffa00a93c..6b944627137 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void)
 		*port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
 		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						& gpio_bank_saved[bank].dir;
 		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
 		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
 		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
 		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-						| gpio_bank_saved[bank].dir;
-
 		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
 	}
 	AWA_DUMMY_READ(maska);
-- 
cgit v1.2.3


From c70c754ff916cedd969a73549799d2167ffefcd6 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 9 Jul 2009 09:58:52 +0000
Subject: Blackfin: drop per-cpu loops_per_jiffy tracking

On Blackfin SMP, a per-cpu loops_per_jiffy is pointless since both cores
always run at the same CCLK.  In addition, the current implementation has
flaws since the main consumer for loops_per_jiffy (asm/delay.h) uses the
global kernel loops_per_jiffy and not the per_cpu one.  So punt all of the
per-cpu handling and go back to the global shared one.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/cpu.h | 1 -
 arch/blackfin/kernel/setup.c    | 7 +++----
 arch/blackfin/mach-common/smp.c | 2 +-
 3 files changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index 565b8136855..fadfa82f93b 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -32,7 +32,6 @@ struct blackfin_cpudata {
 	struct task_struct *idle;
 	unsigned int imemctl;
 	unsigned int dmemctl;
-	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
 	unsigned long icache_invld_count;
 };
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 98c2f79afda..6225edae488 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu)
 	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
 
 	cpudata->idle = current;
-	cpudata->loops_per_jiffy = loops_per_jiffy;
 	cpudata->imemctl = bfin_read_IMEM_CONTROL();
 	cpudata->dmemctl = bfin_read_DMEM_CONTROL();
 }
@@ -1159,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
 		"Calibration\t: %lu loops\n",
-		(cpudata->loops_per_jiffy * HZ) / 500000,
-		((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
-		(cpudata->loops_per_jiffy * HZ));
+		(loops_per_jiffy * HZ) / 500000,
+		((loops_per_jiffy * HZ) / 5000) % 100,
+		(loops_per_jiffy * HZ));
 
 	/* Check Cache configutation */
 	switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 61840059dfa..e6e3429d92b 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -450,7 +450,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	unsigned int cpu;
 
 	for_each_online_cpu(cpu)
-		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+		bogosum += loops_per_jiffy;
 
 	printk(KERN_INFO "SMP: Total of %d processors activated "
 	       "(%lu.%02lu BogoMIPS).\n",
-- 
cgit v1.2.3


From f574a76a3b19848ac61814756716e26f85f2c3f7 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Thu, 9 Jul 2009 15:11:52 +0000
Subject: Blackfin: work around anomaly 05000189

Similar to anomaly 05000281 but not as bad, we cannot return to the
instruction causing a fault otherwise we'll trigger a second false
exception.  The system can still recover, but it isn't correct.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/traps.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 9efac0f2e2c..bf2b2d1f8ae 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -621,7 +621,8 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	}
 
 	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
-		(ANOMALY_05000281 && trapnr == VEC_HWERR))
+	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
  traps_done:
-- 
cgit v1.2.3


From 5bc6e3cfe6db5f33c60f042a9ba203431f334756 Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Fri, 10 Jul 2009 11:34:51 +0000
Subject: Blackfin: add CPLB entries for Core B on-chip L1 SRAM regions

The Blackfin SMP port was missing CPLB entries for Core B on-chip L1 SRAM
regions.  Any code that attempted to use these would wrongly crash due to
a CPLB miss.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/cplb-nompu/cplbinit.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index d6c067782e6..685f160a5a3 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	}
 
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
-	if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-		d_tbl[i_d].addr = L1_DATA_A_START;
-		d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+	if (cpu == 0) {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
 	}
-	i_tbl[i_i].addr = L1_CODE_START;
-	i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-
+#ifdef CONFIG_SMP
+	else {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = COREB_L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	}
+#endif
 	first_switched_dcplb = i_d;
 	first_switched_icplb = i_i;
 
-- 
cgit v1.2.3


From 994e9a2e01f47f7ce24dec7edc45d70401468370 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 14 Jul 2009 03:15:19 +0000
Subject: arch/blackfin: Add kmalloc NULL tests

Check that the result of kmalloc is not NULL before passing it to other
functions.

In the first two cases, the new code returns -ENOMEM, which seems
compatible with what is done for similar functions for other architectures.

In the last two cases, the new code fails silently, ie just returns,
because the function has void return type.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression *x;
identifier f;
constant char *C;
@@

x = \(kmalloc\|kcalloc\|kzalloc\)(...);
... when != x == NULL
    when != x != NULL
    when != (x || ...)
(
kfree(x)
|
f(...,C,...,x,...)
|
*f(...,x,...)
|
*x->f
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-common/smp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index e6e3429d92b..349ee3f5466 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 		return 0;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 	cpu_set(cpu, callmap);
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_RESCHEDULE;
@@ -314,6 +320,8 @@ void smp_send_stop(void)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_CPU_STOP;
-- 
cgit v1.2.3


From 2a549c364aa11e658ae14b71861d25474e5808cf Mon Sep 17 00:00:00 2001
From: Sachin Sant <sachinp@in.ibm.com>
Date: Thu, 16 Jul 2009 19:58:42 +0800
Subject: crypto: s390 - Fix sha build failure

Use struct s390_sha_ctx instead of sha1/sha256_state struct to fix
s390 crypto build break.

Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha1_s390.c   | 2 +-
 arch/s390/crypto/sha256_s390.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 2c5ec7969e3..4a943789c20 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -59,7 +59,7 @@ static int sha1_export(struct shash_desc *desc, void *out)
 
 static int sha1_import(struct shash_desc *desc, const u8 *in)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 	struct sha1_state *ictx = in;
 
 	sctx->count = ictx->count;
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 943a669452c..2bab5197789 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -55,7 +55,7 @@ static int sha256_export(struct shash_desc *desc, void *out)
 
 static int sha256_import(struct shash_desc *desc, const u8 *in)
 {
-	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 	struct sha256_state *ictx = in;
 
 	sctx->count = ictx->count;
-- 
cgit v1.2.3


From 6843f405da9d0adf734d8f695311e29cc92a220c Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Thu, 16 Jul 2009 13:53:37 -0400
Subject: Blackfin: define HARDIRQ_BITS again for now

The default values of HARDIRQ_BITS and PREEMPT_BITS in common code leads to
build failure:

In file included from include/linux/interrupt.h:12,
                from include/linux/kernel_stat.h:8,
                from arch/blackfin/kernel/asm-offsets.c:32:
include/linux/hardirq.h:66:2: error: #error PREEMPT_ACTIVE is too low!

So until that gets resolved, just declare our own default value again.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/hardirq.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index cbd52f86bb9..0b78b873df5 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -6,6 +6,9 @@
 extern void ack_bad_irq(unsigned int irq);
 #define ack_bad_irq ack_bad_irq
 
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
 #include <asm-generic/hardirq.h>
 
 #endif
-- 
cgit v1.2.3


From 5780888bcac316508eb5f4dd23bbea8b5057647c Mon Sep 17 00:00:00 2001
From: Matias Zabaljauregui <zabaljauregui@gmail.com>
Date: Thu, 18 Jun 2009 11:44:06 -0300
Subject: lguest: fix journey

fix: "make Guest" was complaining about duplicated G:032

Signed-off-by: Matias Zabaljauregui <zabaljauregui@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/include/asm/lguest_hcall.h | 2 +-
 arch/x86/lguest/boot.c              | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index d31c4a68407..33600a66755 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -30,7 +30,7 @@
 #include <asm/hw_irq.h>
 #include <asm/kvm_para.h>
 
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
+/*G:030 But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 7bc65f0f62c..0188fd37b6c 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1079,7 +1079,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 	return insn_len;
 }
 
-/*G:030 Once we get to lguest_init(), we know we're a Guest.  The various
+/*G:029 Once we get to lguest_init(), we know we're a Guest.  The various
  * pv_ops structures in the kernel provide points for (almost) every routine we
  * have to override to avoid privileged instructions. */
 __init void lguest_init(void)
-- 
cgit v1.2.3


From 7a5049205f7265620c48781814155f2763e70abb Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 17 Jul 2009 21:47:44 -0600
Subject: lguest: restrict CPUID to avoid perf counter wrmsr

Avoid the following:
[    0.012093] WARNING: at arch/x86/kernel/apic/apic.c:249 native_apic_write_dummy+0x2f/0x40()

Rather than chase each new cpuid-detected feature, just lie about the highest
valid CPUID so this code is never run.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/lguest/boot.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 0188fd37b6c..f2bf1f73d46 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -379,6 +379,11 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 
 	native_cpuid(ax, bx, cx, dx);
 	switch (function) {
+	case 0: /* ID and highest CPUID.  Futureproof a little by sticking to
+		 * older ones. */
+		if (*ax > 5)
+			*ax = 5;
+		break;
 	case 1:	/* Basic feature request. */
 		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
 		*cx &= 0x00002201;
-- 
cgit v1.2.3


From 5b1c3c858cff4da95b9f7091eef424e706784cab Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 13 Jul 2009 19:50:10 +0100
Subject: [ARM] 5600/1: ep93xx: core.c remove cast when copying dev_addr

The MAC address for the ep93xx ethernet driver can be optionally
copied from registers in the controller when booting.  Due to
[ARM] 5573/1: ep93xx: ensure typesafe io, the cast for the source
address is no longer needed.

EP93XX_ETHERNET_BASE is typed as a (void __iomem __force *) so
memcpy_fromio() needs to be used instead of memcpy().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 68ac0545f57..4c38941a92c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -541,10 +541,8 @@ static struct platform_device ep93xx_eth_device = {
 
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
-	if (copy_addr) {
-		memcpy(data->dev_addr,
-			(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	}
+	if (copy_addr)
+		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
 
 	ep93xx_eth_data = *data;
 	platform_device_register(&ep93xx_eth_device);
-- 
cgit v1.2.3


From 595c050d89e91e91cca3845e48b01042677bd19e Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:31:46 +0100
Subject: [ARM] 5605/1: Fix ep93xx gpio.c headers

Fix a number of build errors in ep93xx gpio.c due to to missing irq.h

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 2d83d69e2ee..1ea8871e03a 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -18,6 +18,7 @@
 #include <linux/seq_file.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 
-- 
cgit v1.2.3


From fbeeea5386ab213bd55b223f3a75c823fccd6df5 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:51:59 +0100
Subject: [ARM] 5607/1: ep93xx: Use __iomem pointer on syscon write function

Change the reg argument of the ep93xx_syscon_swlocked_write function
to be an __iomem pointer. Fixes a number of build warnings.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c                  | 2 +-
 arch/arm/mach-ep93xx/include/mach/platform.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4c38941a92c..b390c35f8bc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -377,7 +377,7 @@ void __init ep93xx_init_irq(void)
  */
 static DEFINE_SPINLOCK(syscon_swlock);
 
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
 {
 	unsigned long flags;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index fb5e59a3ea0..0af0a3ba704 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -17,7 +17,7 @@ void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
 void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
 
 static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-- 
cgit v1.2.3


From 5d43f11bcf854d83b24c7ca6bb15d9ab9130159f Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 16 Jul 2009 22:46:31 +0100
Subject: [ARM] 5609/1: ep93xx: add register defines for keypad support

Add missing register defines for ep93xx keypad clock support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 087d22b8f35..a11ae779baa 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -206,6 +206,11 @@
 #define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-- 
cgit v1.2.3


From d2c241955095b129459985a8c02d85b70984b945 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:09:54 +0100
Subject: [ARM] 5601/1: Add HAVE_CLK depends on for w90p910 platform

Add HAVE_CLK depends on for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c3fed1ee730 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,6 +493,7 @@ config ARCH_W90X900
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-- 
cgit v1.2.3


From db58e90fdbe9d12b431ae8d8e856961ce75d74f0 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:10:43 +0100
Subject: [ARM] 5602/1: Add sub clock api for w90p910 platform

Add sub clock api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/clock.c   | 18 ++++++++++++++++++
 arch/arm/mach-w90x900/clock.h   |  8 ++++++++
 arch/arm/mach-w90x900/w90p910.c |  6 ++++++
 3 files changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613cd39..49cf1fbc14e 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
 
 #include "clock.h"
 
+#define SUBCLK 0x24
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
@@ -68,6 +70,22 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
+void w90x900_subclk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
 void clks_register(struct clk_lookup *clks, size_t num)
 {
 	int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda76d5..d2f0e50a70b 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -13,6 +13,7 @@
 #include <asm/clkdev.h>
 
 void w90x900_clk_enable(struct clk *clk, int enable);
+void w90x900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -27,6 +28,13 @@ struct clk clk_##_name = {				\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
+#define DEFINE_SUBCLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_subclk_enable,	\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+
 #define DEF_CLKLOOK(_clk, _devname, _conname)		\
 	{						\
 		.clk		= _clk,			\
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1c97e4930b7..1bde69eac3d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -57,9 +57,12 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static DEFINE_CLK(lcd, 0);
 static DEFINE_CLK(audio, 1);
 static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
 static DEFINE_CLK(dmac, 5);
 static DEFINE_CLK(atapi, 6);
 static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
 static DEFINE_CLK(usbd, 8);
 static DEFINE_CLK(usbh, 9);
 static DEFINE_CLK(g2d, 10);;
@@ -75,9 +78,12 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
 	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
 	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
 	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
 	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
 	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
 	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
 	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
 	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-- 
cgit v1.2.3


From 0abe1856bdb68ef699c00949cf9f81fbec98d499 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:12:26 +0100
Subject: [ARM] 5604/1: Add keypad multi-function pin api for w90p910 platform

Add keypad multi-function pin api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index a3520fefb5e..8aec34b044c 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -90,7 +90,7 @@ void mfp_set_groupc(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
-void mfp_set_groupi(struct device *dev, int gpio)
+void mfp_set_groupi(struct device *dev)
 {
 	unsigned long mfpen;
 	const char *dev_id;
@@ -103,10 +103,14 @@ void mfp_set_groupi(struct device *dev, int gpio)
 
 	mfpen = __raw_readl(REG_MFSEL);
 
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
 	if (strcmp(dev_id, "w90p910-wdog") == 0)
 		mfpen |= GPSELEI1;/*enable wdog*/
 		else if (strcmp(dev_id, "w90p910-atapi") == 0)
 			mfpen |= GPSELEI0;/*enable atapi*/
+			else if (strcmp(dev_id, "w90p910-keypad") == 0)
+				mfpen &= ~GPSELEI0;/*enable keypad*/
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-- 
cgit v1.2.3


From d740d347f856f0fd8baf2f63d8daa600ed135bfd Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 16 Jul 2009 22:40:26 +0100
Subject: [ARM] 5608/1: Updated U300 defconfig

Removed the LBD support that isn't of any use right now at least,
then remove remnants of the TCM config flags that somehow crept
in by mistake (not yet merged patch for 2.6.32) and then the usual
defconfig noise from updated menus.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/u300_defconfig | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 4762d900129..7d61ae6e75d 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul  2 00:16:59 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -911,7 +911,6 @@ CONFIG_REGULATOR=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 6f409461210baf76ade1bfdd9470fd5b98378b36 Mon Sep 17 00:00:00 2001
From: Fenghua Yu <fenghua.yu@intel.com>
Date: Thu, 9 Jul 2009 21:23:39 -0700
Subject: Fix ia64 compilation IS_ERR and PTE_ERR errors.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

When building ia64 kernel with CONFIG_XEN_SYS_HYPERVISOR, compiler reports
errors:

drivers/xen/sys-hypervisor.c: In function ‘uuid_show’:
drivers/xen/sys-hypervisor.c:125: error: implicit declaration of function ‘IS_ERR’
drivers/xen/sys-hypervisor.c:126: error: implicit declaration of function ‘PTR_ERR’

This patch fixes the errors.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
---
 arch/ia64/include/asm/xen/hypervisor.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h
index e425227a418..88afb54501e 100644
--- a/arch/ia64/include/asm/xen/hypervisor.h
+++ b/arch/ia64/include/asm/xen/hypervisor.h
@@ -33,6 +33,7 @@
 #ifndef _ASM_IA64_XEN_HYPERVISOR_H
 #define _ASM_IA64_XEN_HYPERVISOR_H
 
+#include <linux/err.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>	/* to compile feature.c */
 #include <xen/features.h>		/* to comiple xen-netfront.c */
-- 
cgit v1.2.3


From 390bd132b2831a2ad0268e84bffbfc0680debfe5 Mon Sep 17 00:00:00 2001
From: fujita <fujita@tulip.osrg.net>
Date: Thu, 9 Jul 2009 21:25:05 -0700
Subject: Add dma_debug_init() for ia64

The commit 9916219579d078c80377dd3988c2cc213536d868 was supposed to
add CONFIG_DMA_API_DEBUG support to IA64 however I forgot to add
dma_debug_init().

Signed-off-by: fujita <fujita@tulip.osrg.net>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/kernel/dma-mapping.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 086a2aeb040..39a3cd0a417 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -6,6 +6,14 @@ int iommu_detected __read_mostly;
 struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+}
+fs_initcall(dma_init);
+
 struct dma_map_ops *dma_get_ops(struct device *dev)
 {
 	return dma_ops;
-- 
cgit v1.2.3


From 18282b36d742347abd9a4bc74fe9fd2432a8335b Mon Sep 17 00:00:00 2001
From: Aurelien Jarno <aurelien@aurel32.net>
Date: Fri, 17 Jul 2009 06:35:05 -0700
Subject: Revert "Neither asm/types.h nor linux/types.h is required for
 arch/ia64/include/asm/fpu.h"

asm/fpu.h uses the __IA64_UL macro which is declared in asm/types.h, so
this include is really required. Without it, GNU libc fails to build.

This reverts commit 2678c07b07ac2076675e5d57653bdf02e9af1950.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/include/asm/fpu.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
index 0c26157cffa..b6395ad1500 100644
--- a/arch/ia64/include/asm/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
@@ -6,6 +6,8 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
+#include <linux/types.h>
+
 /* floating point status register: */
 #define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
 #define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
-- 
cgit v1.2.3


From 04e448d9a386640a79a4aa71251aa1cdd314f662 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Sun, 12 Jul 2009 18:23:33 -0400
Subject: vmlinux.lds.h: restructure BSS linker script macros

The BSS section macros in vmlinux.lds.h currently place the .sbss
input section outside the bounds of [__bss_start, __bss_end].  On all
architectures except for microblaze that handle both .sbss and
__bss_start/__bss_end, this is wrong: the .sbss input section is
within the range [__bss_start, __bss_end].  Relatedly, the example
code at the top of the file actually has __bss_start/__bss_end defined
twice; I believe the right fix here is to define them in the
BSS_SECTION macro but not in the BSS macro.

Another problem with the current macros is that several
architectures have an ALIGN(4) or some other small number just before
__bss_stop in their linker scripts.  The BSS_SECTION macro currently
hardcodes this to 4; while it should really be an argument.  It also
ignores its sbss_align argument; fix that.

mn10300 is the only user at present of any of the macros touched by
this patch.  It looks like mn10300 actually was incorrectly converted
to use the new BSS() macro (the alignment of 4 prior to conversion was
a __bss_stop alignment, but the argument to the BSS macro is a start
alignment).  So fix this as well.

I'd like acks from Sam and David on this one.  Also CCing Paul, since
he has a patch from me which will need to be updated to use
BSS_SECTION(0, PAGE_SIZE, 4) once this gets merged.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/mn10300/kernel/vmlinux.lds.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index c96ba3da95a..f4aa0793465 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -107,7 +107,7 @@ SECTIONS
   __init_end = .;
   /* freed after init ends here */
 
-  BSS(4)
+  BSS_SECTION(0, PAGE_SIZE, 4)
 
   _end = . ;
 
-- 
cgit v1.2.3


From eb9069119d1c4bc856b4c1339abcad0105691e71 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 15 Jul 2009 19:47:24 +0800
Subject: [ARM] pxa: fix gpio issue in zylonite

WARNING: at drivers/gpio/gpiolib.c:83 gpio_ensure_requested+0x58/0xbc()
 autorequest GPIO-71
 Modules linked in:
 [<c0028bd0>] (unwind_backtrace+0x0/0xe8) from [<c003c328>] (warn_slowpath_common+0x48/0x78)
 [<c003c328>] (warn_slowpath_common+0x48/0x78) from [<c003c394>] (warn_slowpath_fmt+0x28/0x38)
 [<c003c394>] (warn_slowpath_fmt+0x28/0x38) from [<c0146128>] (gpio_ensure_requested+0x58/0xbc)
 [<c0146128>] (gpio_ensure_requested+0x58/0xbc) from [<c0146308>] (gpio_direction_input+0x80/0xf4)
 [<c0146308>] (gpio_direction_input+0x80/0xf4) from [<c000c668>] (zylonite_pxa300_init+0x108/0x214)
 [<c000c668>] (zylonite_pxa300_init+0x108/0x214) from [<c000c4e4>] (zylonite_init+0x8/0x84)
 [<c000c4e4>] (zylonite_init+0x8/0x84) from [<c00097cc>] (customize_machine+0x18/0x24)
 [<c00097cc>] (customize_machine+0x18/0x24) from [<c00222e0>] (do_one_initcall+0x30/0x1b0)
 [<c00222e0>] (do_one_initcall+0x30/0x1b0) from [<c00083f4>] (kernel_init+0xa4/0x11c)
 [<c00083f4>] (kernel_init+0xa4/0x11c) from [<c0023f3c>] (kernel_thread_exit+0x0/0x8)
 ---[ end trace 1b75b31a2719ed1c ]---

This issue is caused by using gpio pin without request. Add gpio_request()
into zylonite. To simplify the code, error checking is omitted since this
is being performed early.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/zylonite_pxa300.c | 2 ++
 arch/arm/mach-pxa/zylonite_pxa320.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index cefd1c0a854..84095440a87 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -197,10 +197,12 @@ static void __init zylonite_detect_lcd_panel(void)
 	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
 		id = id << 1;
 		gpio = mfp_to_gpio(lcd_detect_pins[i]);
+		gpio_request(gpio, "LCD_ID_PINS");
 		gpio_direction_input(gpio);
 
 		if (gpio_get_value(gpio))
 			id = id | 0x1;
+		gpio_free(gpio);
 	}
 
 	/* lcd id, flush out bit 1 */
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index cc5a2283360..60d08f23f5e 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -176,10 +176,12 @@ static void __init zylonite_detect_lcd_panel(void)
 	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
 		id = id << 1;
 		gpio = mfp_to_gpio(lcd_detect_pins[i]);
+		gpio_request(gpio, "LCD_ID_PINS");
 		gpio_direction_input(gpio);
 
 		if (gpio_get_value(gpio))
 			id = id | 0x1;
+		gpio_free(gpio);
 	}
 
 	/* lcd id, flush out bit 1 */
-- 
cgit v1.2.3


From ecf763c5677faee04d47333e6ed8e9539a427770 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 16 Jul 2009 19:37:29 +0200
Subject: [ARM] pxa: add STUART MFP config for PalmTX,T5,LD

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmld.c | 4 ++++
 arch/arm/mach-pxa/palmt5.c | 4 ++++
 arch/arm/mach-pxa/palmtx.c | 4 ++++
 3 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ed70f281dd0..169fcc18154 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -128,6 +128,10 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO38_GPIO,	/* wifi ready */
 	GPIO81_GPIO,	/* wifi reset */
 
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+
 	/* HDD */
 	GPIO98_GPIO,	/* HDD reset */
 	GPIO115_GPIO,	/* HDD power */
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index aae64a12a73..33f726ff55e 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -111,6 +111,10 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	/* PWM */
 	GPIO16_PWM0_OUT,
 
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+
 	/* MISC */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO90_GPIO,	/* power detect */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 6c15d84bde5..83d02087958 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -127,6 +127,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO76_LCD_PCLK,
 	GPIO77_LCD_BIAS,
 
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+
 	/* MISC. */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO12_GPIO,	/* power detect */
-- 
cgit v1.2.3


From c197cec5fae7968a7154ee999f0a1b07938d1528 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:25 +0100
Subject: ARM: S3C: Update hwmon device definition and name

Change the hwmon device name to something more generic as this
should be functional for both the s3c24xx and s3c64xx archs.

Since it has yet to have a driver, it is pretty safe to change
as there are no extant users.

Also add the necessary entry in devs.h which seems to have been
missed  out at somepoint.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/devs.h | 2 ++
 arch/arm/plat-s3c24xx/devs.c          | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..1989ca1bb2b 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
 
+extern struct platform_device s3c_device_hwmon;
+
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..3489019b537 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -348,7 +348,7 @@ struct platform_device s3c_device_adc = {
 /* HWMON */
 
 struct platform_device s3c_device_hwmon = {
-	.name		= "s3c24xx-hwmon",
+	.name		= "s3c-hwmon",
 	.id		= -1,
 	.dev.parent	= &s3c_device_adc.dev,
 };
-- 
cgit v1.2.3


From 885f9ebe7554628967b6e93b284dd3021e1bb280 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:26 +0100
Subject: ARM: BAST: Add hwmon device information

Add platform device information for the ADC channels to be exported
via HWMON. This exports all the ADCs not being used for the touchscreen
interface.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..06670bb89ca 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
+#include <plat/hwmon.h>
 #include <plat/nand.h>
 #include <plat/iic.h>
 #include <mach/fb.h>
@@ -547,7 +548,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
 	},
 };
 
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+	/* LCD contrast (0-6.6V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-contrast",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* LED current feedback */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "led-feedback",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+	/* LCD feedback (0-6.6V) */
+	.in[2] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-feedback",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* Vcore (1.8-2.0V), Vref 3.3V  */
+	.in[3] = &(struct s3c_hwmon_chcfg) {
+		.name		= "vcore",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+};
+
 /* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_usb,
@@ -556,6 +585,8 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_hwmon,
 	&bast_device_dm9k,
 	&bast_device_asix,
 	&bast_device_axpp,
@@ -588,6 +619,7 @@ static void __init bast_map_io(void)
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
+	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
-- 
cgit v1.2.3


From e170adcb406504b8acd35554c69830c11916be1f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:27 +0100
Subject: ARM: S3C: Add ADC synchronous read call.

To add HWMON support, we need a synchronous read() call that blocks
until completion. Add the client that is being service to the select
and convert callbacks to make the code easier.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/adc.h |  8 +++--
 arch/arm/plat-s3c24xx/adc.c          | 64 +++++++++++++++++++++++++++++-------
 2 files changed, 59 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd476b6..5f3b1cd53b9 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
 extern struct s3c_adc_client *
 	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(unsigned selected),
-			 void (*conv)(unsigned d0, unsigned d1,
+			 void (*select)(struct s3c_adc_client *client,
+					unsigned selected),
+			 void (*conv)(struct s3c_adc_client *client,
+				      unsigned d0, unsigned d1,
 				      unsigned *samples_left),
 			 unsigned int is_ts);
 
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9..11117a7ba91 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
 struct s3c_adc_client {
 	struct platform_device	*pdev;
 	struct list_head	 pend;
+	wait_queue_head_t	*wait;
 
 	unsigned int		 nr_samples;
+	int			 result;
 	unsigned char		 is_ts;
 	unsigned char		 channel;
 
-	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2,
+	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
+	void	(*convert_cb)(struct s3c_adc_client *c,
+			      unsigned val1, unsigned val2,
 			      unsigned *samples_left);
 };
 
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-	client->select_cb(1);
+	client->select_cb(client, 1);
 
 	con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
 }
 EXPORT_SYMBOL_GPL(s3c_adc_start);
 
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+			     unsigned v, unsigned u, unsigned *left)
+{
+	client->result = v;
+	wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret;
+
+	client->convert_cb = s3c_convert_done;
+	client->wait = &wake;
+	client->result = -1;
+
+	ret = s3c_adc_start(client, ch, 1);
+	if (ret < 0)
+		goto err;
+
+	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+	if (client->result < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	client->convert_cb = NULL;
+	return client->result;
+
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+				   unsigned select)
 {
 }
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1,
+					void (*select)(struct s3c_adc_client *client,
+						       unsigned int selected),
+					void (*conv)(struct s3c_adc_client *client,
+						     unsigned d0, unsigned d1,
 						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
 
 	WARN_ON(!pdev);
-	WARN_ON(!conv);
 
 	if (!select)
 		select = s3c_adc_default_select;
 
-	if (!conv || !pdev)
+	if (!pdev)
 		return ERR_PTR(-EINVAL);
 
 	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
 	client->nr_samples--;
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+	if (client->convert_cb)
+		(client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+				     &client->nr_samples);
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
-		client->select_cb(1);
+		client->select_cb(client, 1);
 		s3c_adc_convert(adc);
 	} else {
 		local_irq_save(flags);
-		(client->select_cb)(0);
+		(client->select_cb)(client, 0);
 		adc->cur = NULL;
 
 		s3c_adc_try(adc);
-- 
cgit v1.2.3


From bff78650a2b0ed42b8fb134b6a9b387e00027d67 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:28 +0100
Subject: ARM: HWMON: S3C24XX series ADC driver

Add support for the ADC controller on the S3C series of processors to
drivers/hwmon for use with hardware monitoring systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/hwmon.h | 41 ++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/plat-s3c/include/plat/hwmon.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 00000000000..1ba88ea0aa3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+	const char	*name;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+	struct s3c_hwmon_chcfg	*in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
-- 
cgit v1.2.3


From 6aa542a694dc9ea4344a8a590d2628c33d1b9431 Mon Sep 17 00:00:00 2001
From: Alexey Fisher <bug-track@fisher-privat.net>
Date: Wed, 15 Jul 2009 14:16:09 +0200
Subject: x86: Add quirk for Intel DG45ID board to avoid low memory corruption

AMI BIOS with low memory corruption was found on Intel DG45ID
board (Bug 13710). Add this board to the blacklist - in the
(somewhat optimistic) hope of future boards/BIOSes from Intel
not having this bug.

Also see:

  http://bugzilla.kernel.org/show_bug.cgi?id=13736

Signed-off-by: Alexey Fisher <bug-track@fisher-privat.net>
Cc: ykzhao <yakui.zhao@intel.com>
Cc: alan@lxorguk.ukuu.org.uk
Cc: <stable@kernel.org>
LKML-Reference: <1247660169-4503-1-git-send-email-bug-track@fisher-privat.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index de2cab13284..63f32d220ef 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -672,6 +672,19 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
 		},
 	},
+	{
+	/*
+	 * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+	 * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+	 * match only DMI_BOARD_NAME and see if there is more bad products
+	 * with this vendor.
+	 */
+		.callback = dmi_low_memory_corruption,
+		.ident = "AMI BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+		},
+	},
 #endif
 	{}
 };
-- 
cgit v1.2.3


From 8bcdbe427924a1e4b4e4cf68020e92e9f93fe011 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Tue, 14 Jul 2009 10:52:55 +0100
Subject: x86: Include all of .data.* sections in _edata on 64-bit

The .data.read_mostly and .data.cacheline_aligned sections
aren't covered by the _sdata .. _edata range on x86-64. This
affects kmemleak reporting leading to possible false
positives by not scanning the whole data section.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Alexey Fisher <bug-track@fisher-privat.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <1247565175.28240.37.camel@pc1117.cambridge.arm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
 arch/x86/kernel/vmlinux.lds.S | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 367e8788204..59f31d2dd43 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -112,11 +112,6 @@ SECTIONS
 		_sdata = .;
 		DATA_DATA
 		CONSTRUCTORS
-
-#ifdef CONFIG_X86_64
-		/* End of data section */
-		_edata = .;
-#endif
 	} :data
 
 #ifdef CONFIG_X86_32
@@ -156,10 +151,8 @@ SECTIONS
 	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
 		*(.data.read_mostly)
 
-#ifdef CONFIG_X86_32
 		/* End of data section */
 		_edata = .;
-#endif
 	}
 
 #ifdef CONFIG_X86_64
-- 
cgit v1.2.3


From 64e8be6ebdb8212898781fff7722ff2b0eb76131 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 18 Jul 2009 15:51:55 +0100
Subject: ARM: Realview & Versatile: Fix i2c_board_info definitions

Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-realview/core.c  | 3 +--
 arch/arm/mach-versatile/core.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05093c..facbd49eec6 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = {
 
 static struct i2c_board_info realview_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc8bd1..31093af7d05 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = {
 
 static struct i2c_board_info versatile_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 
-- 
cgit v1.2.3


From 254e0a6bff87ab8b22293c4bd1443507df698407 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:08:54 +0900
Subject: x86: Use get_desc_base()

Use get_desc_base() to get the base address in desc_struct

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718150853.GA11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/doublefault_32.c | 4 +---
 arch/x86/kernel/step.c           | 9 ++++-----
 2 files changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c
index b4f14c6c09d..37250fe490b 100644
--- a/arch/x86/kernel/doublefault_32.c
+++ b/arch/x86/kernel/doublefault_32.c
@@ -27,9 +27,7 @@ static void doublefault_fn(void)
 
 	if (ptr_ok(gdt)) {
 		gdt += GDT_ENTRY_TSS << 3;
-		tss = *(u16 *)(gdt+2);
-		tss += *(u8 *)(gdt+4) << 16;
-		tss += *(u8 *)(gdt+7) << 24;
+		tss = get_desc_base((struct desc_struct *)gdt);
 		printk(KERN_EMERG "double fault, tss at %08lx\n", tss);
 
 		if (ptr_ok(tss)) {
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index e8b9863ef8c..3149032ff10 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/ptrace.h>
+#include <asm/desc.h>
 
 unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs)
 {
@@ -23,7 +24,7 @@ unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *re
 	 * and APM bios ones we just ignore here.
 	 */
 	if ((seg & SEGMENT_TI_MASK) == SEGMENT_LDT) {
-		u32 *desc;
+		struct desc_struct *desc;
 		unsigned long base;
 
 		seg &= ~7UL;
@@ -33,12 +34,10 @@ unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *re
 			addr = -1L; /* bogus selector, access would fault */
 		else {
 			desc = child->mm->context.ldt + seg;
-			base = ((desc[0] >> 16) |
-				((desc[1] & 0xff) << 16) |
-				(desc[1] & 0xff000000));
+			base = get_desc_base(desc);
 
 			/* 16-bit code segment? */
-			if (!((desc[1] >> 22) & 1))
+			if (!desc->d)
 				addr &= 0xffff;
 			addr += base;
 		}
-- 
cgit v1.2.3


From fde0312d01b60a3fd5dc56e69a9613defbbc7097 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:09:56 +0900
Subject: x86: Remove unused patch_espfix_desc()

patch_espfix_desc() is not used after commit
dc4c2a0aed3b09f6e255bd5c3faa50fe6e0b2ded

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718150955.GB11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/traps.h |  4 +---
 arch/x86/kernel/traps.c      | 21 ---------------------
 2 files changed, 1 insertion(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index bfd74c032fc..4da91ad69e0 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -81,9 +81,7 @@ extern int panic_on_unrecovered_nmi;
 
 void math_error(void __user *);
 void math_emulate(struct math_emu_info *);
-#ifdef CONFIG_X86_32
-unsigned long patch_espfix_desc(unsigned long, unsigned long);
-#else
+#ifndef CONFIG_X86_32
 asmlinkage void smp_thermal_interrupt(void);
 asmlinkage void mce_threshold_interrupt(void);
 #endif
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5204332f475..23679411020 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -786,27 +786,6 @@ do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
-{
-	struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
-	unsigned long base = (kesp - uesp) & -THREAD_SIZE;
-	unsigned long new_kesp = kesp - base;
-	unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
-	__u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
-
-	/* Set up base for espfix segment */
-	desc &= 0x00f0ff0000000000ULL;
-	desc |=	((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
-		((((__u64)base) << 32) & 0xff00000000000000ULL) |
-		((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
-		(lim_pages & 0xffff);
-	*(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
-
-	return new_kesp;
-}
-#endif
-
 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
 {
 }
-- 
cgit v1.2.3


From 57594742a2b545f8f114cda34f15650be8ae976d Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:11:06 +0900
Subject: x86: Introduce set_desc_base() and set_desc_limit()

Rename set_base()/set_limit to set_desc_base()/set_desc_limit()
and rewrite them in C. These are naturally introduced by the
idea of get_desc_base()/get_desc_limit().

The conversion actually found the bug in apm_32.c:
bad_bios_desc is written at run-time, but it is defined const
variable.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718151105.GC11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/desc.h           | 13 +++++++++++++
 arch/x86/include/asm/stackprotector.h |  4 +---
 arch/x86/include/asm/system.h         | 27 ---------------------------
 arch/x86/kernel/apm_32.c              | 18 +++++++++---------
 4 files changed, 23 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index c993e9e0fed..e8de2f6f5ca 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -291,11 +291,24 @@ static inline unsigned long get_desc_base(const struct desc_struct *desc)
 	return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
 }
 
+static inline void set_desc_base(struct desc_struct *desc, unsigned long base)
+{
+	desc->base0 = base & 0xffff;
+	desc->base1 = (base >> 16) & 0xff;
+	desc->base2 = (base >> 24) & 0xff;
+}
+
 static inline unsigned long get_desc_limit(const struct desc_struct *desc)
 {
 	return desc->limit0 | (desc->limit << 16);
 }
 
+static inline void set_desc_limit(struct desc_struct *desc, unsigned long limit)
+{
+	desc->limit0 = limit & 0xffff;
+	desc->limit = (limit >> 16) & 0xf;
+}
+
 static inline void _set_gate(int gate, unsigned type, void *addr,
 			     unsigned dpl, unsigned ist, unsigned seg)
 {
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index c2d742c6e15..cdc5e0b126a 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -90,9 +90,7 @@ static inline void setup_stack_canary_segment(int cpu)
 	struct desc_struct desc;
 
 	desc = gdt_table[GDT_ENTRY_STACK_CANARY];
-	desc.base0 = canary & 0xffff;
-	desc.base1 = (canary >> 16) & 0xff;
-	desc.base2 = (canary >> 24) & 0xff;
+	set_desc_base(&desc, canary);
 	write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
 #endif
 }
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 643c59b4bc6..75c49c782e2 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -150,33 +150,6 @@ do {									\
 #endif
 
 #ifdef __KERNEL__
-#define _set_base(addr, base) do { unsigned long __pr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %%dl,%2\n\t" \
-	"movb %%dh,%3" \
-	:"=&d" (__pr) \
-	:"m" (*((addr)+2)), \
-	 "m" (*((addr)+4)), \
-	 "m" (*((addr)+7)), \
-	 "0" (base) \
-	); } while (0)
-
-#define _set_limit(addr, limit) do { unsigned long __lr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %2,%%dh\n\t" \
-	"andb $0xf0,%%dh\n\t" \
-	"orb %%dh,%%dl\n\t" \
-	"movb %%dl,%2" \
-	:"=&d" (__lr) \
-	:"m" (*(addr)), \
-	 "m" (*((addr)+6)), \
-	 "0" (limit) \
-	); } while (0)
-
-#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
-#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
 
 extern void native_load_gs_index(unsigned);
 
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 79302e9a33a..b5e841bd60d 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -403,7 +403,7 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
-static const struct desc_struct	bad_bios_desc = { { { 0, 0x00409200 } } };
+static struct desc_struct bad_bios_desc = { { { 0, 0x00409200 } } };
 
 static const char driver_version[] = "1.16ac";	/* no spaces */
 
@@ -2337,8 +2337,8 @@ static int __init apm_init(void)
 	 * This is for buggy BIOS's that refer to (real mode) segment 0x40
 	 * even though they are called in protected mode.
 	 */
-	set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
-	_set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
+	set_desc_base(&bad_bios_desc, (unsigned long)__va(0x40UL << 4));
+	set_desc_limit(&bad_bios_desc, 4095 - (0x40 << 4));
 
 	/*
 	 * Set up the long jump entry point to the APM BIOS, which is called
@@ -2358,12 +2358,12 @@ static int __init apm_init(void)
 	 * code to that CPU.
 	 */
 	gdt = get_cpu_gdt_table(0);
-	set_base(gdt[APM_CS >> 3],
-		 __va((unsigned long)apm_info.bios.cseg << 4));
-	set_base(gdt[APM_CS_16 >> 3],
-		 __va((unsigned long)apm_info.bios.cseg_16 << 4));
-	set_base(gdt[APM_DS >> 3],
-		 __va((unsigned long)apm_info.bios.dseg << 4));
+	set_desc_base(&gdt[APM_CS >> 3],
+		 (unsigned long)__va((unsigned long)apm_info.bios.cseg << 4));
+	set_desc_base(&gdt[APM_CS_16 >> 3],
+		 (unsigned long)__va((unsigned long)apm_info.bios.cseg_16 << 4));
+	set_desc_base(&gdt[APM_DS >> 3],
+		 (unsigned long)__va((unsigned long)apm_info.bios.dseg << 4));
 
 	proc_create("apm", 0, NULL, &apm_file_ops);
 
-- 
cgit v1.2.3


From 0f8ee1874fa80899debc0a0670e2bed0a28d2548 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 17 Jul 2009 14:24:55 +0000
Subject: sh: Add support for multiple hwblk counters

Extend the SuperH hwblk code to support more than one counter.
Contains ground work for the future Runtime PM implementation.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/hwblk.h            | 13 ++++++-
 arch/sh/kernel/cpu/hwblk.c             | 69 +++++++++++++++++++++++-----------
 arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c |  4 +-
 3 files changed, 60 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/hwblk.h b/arch/sh/include/asm/hwblk.h
index 51a46f49663..c01d72cb675 100644
--- a/arch/sh/include/asm/hwblk.h
+++ b/arch/sh/include/asm/hwblk.h
@@ -4,6 +4,9 @@
 #include <asm/clock.h>
 #include <asm/io.h>
 
+#define HWBLK_CNT_USAGE 0
+#define HWBLK_CNT_NR 1
+
 #define HWBLK_AREA_FLAG_PARENT (1 << 0) /* valid parent */
 
 #define HWBLK_AREA(_flags, _parent)		\
@@ -13,7 +16,7 @@
 }
 
 struct hwblk_area {
-	unsigned long cnt;
+	int cnt[HWBLK_CNT_NR];
 	unsigned char parent;
 	unsigned char flags;
 };
@@ -29,7 +32,7 @@ struct hwblk {
 	void __iomem *mstp;
 	unsigned char bit;
 	unsigned char area;
-	unsigned long cnt;
+	int cnt[HWBLK_CNT_NR];
 };
 
 struct hwblk_info {
@@ -46,6 +49,12 @@ int arch_hwblk_sleep_mode(void);
 int hwblk_register(struct hwblk_info *info);
 int hwblk_init(void);
 
+void hwblk_enable(struct hwblk_info *info, int hwblk);
+void hwblk_disable(struct hwblk_info *info, int hwblk);
+
+void hwblk_cnt_inc(struct hwblk_info *info, int hwblk, int cnt);
+void hwblk_cnt_dec(struct hwblk_info *info, int hwblk, int cnt);
+
 /* allow clocks to enable and disable hardware blocks */
 #define SH_HWBLK_CLK(_name, _id, _parent, _hwblk, _flags)	\
 {							\
diff --git a/arch/sh/kernel/cpu/hwblk.c b/arch/sh/kernel/cpu/hwblk.c
index 7c3a73deff2..c0ad7d46e78 100644
--- a/arch/sh/kernel/cpu/hwblk.c
+++ b/arch/sh/kernel/cpu/hwblk.c
@@ -9,38 +9,64 @@
 
 static DEFINE_SPINLOCK(hwblk_lock);
 
-static void hwblk_area_inc(struct hwblk_info *info, int area)
+static void hwblk_area_mod_cnt(struct hwblk_info *info,
+			       int area, int counter, int value, int goal)
 {
 	struct hwblk_area *hap = info->areas + area;
 
-	hap->cnt++;
-	if (hap->cnt == 1)
-		if (hap->flags & HWBLK_AREA_FLAG_PARENT)
-			hwblk_area_inc(info, hap->parent);
+	hap->cnt[counter] += value;
+
+	if (hap->cnt[counter] != goal)
+		return;
+
+	if (hap->flags & HWBLK_AREA_FLAG_PARENT)
+		hwblk_area_mod_cnt(info, hap->parent, counter, value, goal);
 }
 
-static void hwblk_area_dec(struct hwblk_info *info, int area)
+
+static int __hwblk_mod_cnt(struct hwblk_info *info, int hwblk,
+			  int counter, int value, int goal)
 {
-	struct hwblk_area *hap = info->areas + area;
+	struct hwblk *hp = info->hwblks + hwblk;
+
+	hp->cnt[counter] += value;
+	if (hp->cnt[counter] == goal)
+		hwblk_area_mod_cnt(info, hp->area, counter, value, goal);
 
-	if (hap->cnt == 1)
-		if (hap->flags & HWBLK_AREA_FLAG_PARENT)
-			hwblk_area_dec(info, hap->parent);
-	hap->cnt--;
+	return hp->cnt[counter];
 }
 
-static void hwblk_enable(struct hwblk_info *info, int hwblk)
+static void hwblk_mod_cnt(struct hwblk_info *info, int hwblk,
+			  int counter, int value, int goal)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hwblk_lock, flags);
+	__hwblk_mod_cnt(info, hwblk, counter, value, goal);
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+void hwblk_cnt_inc(struct hwblk_info *info, int hwblk, int counter)
+{
+	hwblk_mod_cnt(info, hwblk, counter, 1, 1);
+}
+
+void hwblk_cnt_dec(struct hwblk_info *info, int hwblk, int counter)
+{
+	hwblk_mod_cnt(info, hwblk, counter, -1, 0);
+}
+
+void hwblk_enable(struct hwblk_info *info, int hwblk)
 {
 	struct hwblk *hp = info->hwblks + hwblk;
 	unsigned long tmp;
 	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&hwblk_lock, flags);
 
-	hp->cnt++;
-	if (hp->cnt == 1) {
-		hwblk_area_inc(info, hp->area);
-
+	ret = __hwblk_mod_cnt(info, hwblk, HWBLK_CNT_USAGE, 1, 1);
+	if (ret == 1) {
 		tmp = __raw_readl(hp->mstp);
 		tmp &= ~(1 << hp->bit);
 		__raw_writel(tmp, hp->mstp);
@@ -49,27 +75,26 @@ static void hwblk_enable(struct hwblk_info *info, int hwblk)
 	spin_unlock_irqrestore(&hwblk_lock, flags);
 }
 
-static void hwblk_disable(struct hwblk_info *info, int hwblk)
+void hwblk_disable(struct hwblk_info *info, int hwblk)
 {
 	struct hwblk *hp = info->hwblks + hwblk;
 	unsigned long tmp;
 	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&hwblk_lock, flags);
 
-	if (hp->cnt == 1) {
-		hwblk_area_dec(info, hp->area);
-
+	ret = __hwblk_mod_cnt(info, hwblk, HWBLK_CNT_USAGE, -1, 0);
+	if (ret == 0) {
 		tmp = __raw_readl(hp->mstp);
 		tmp |= 1 << hp->bit;
 		__raw_writel(tmp, hp->mstp);
 	}
-	hp->cnt--;
 
 	spin_unlock_irqrestore(&hwblk_lock, flags);
 }
 
-static struct hwblk_info *hwblk_info;
+struct hwblk_info *hwblk_info;
 
 int __init hwblk_register(struct hwblk_info *info)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
index 00a1c02d82b..a288b5d9234 100644
--- a/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7722.c
@@ -91,10 +91,10 @@ static struct hwblk_info sh7722_hwblk_info = {
 
 int arch_hwblk_sleep_mode(void)
 {
-	if (!sh7722_hwblk_area[CORE_AREA].cnt)
+	if (!sh7722_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE])
 		return SUSP_SH_STANDBY | SUSP_SH_SF;
 
-	if (!sh7722_hwblk_area[CORE_AREA_BM].cnt)
+	if (!sh7722_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE])
 		return SUSP_SH_SLEEP | SUSP_SH_SF;
 
 	return SUSP_SH_SLEEP;
-- 
cgit v1.2.3


From 2094e504a7489a2d774d544592360e578d9325f8 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 17 Jul 2009 14:43:38 +0000
Subject: sh: hwblk support for sh7723

This patch adds hwblk support for the sh7723 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/cpu-sh4/cpu/sh7723.h   |  17 +++++
 arch/sh/kernel/cpu/sh4a/Makefile       |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 110 ++++++++++++++++---------------
 arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c | 117 +++++++++++++++++++++++++++++++++
 4 files changed, 193 insertions(+), 53 deletions(-)
 create mode 100644 arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c

(limited to 'arch')

diff --git a/arch/sh/include/cpu-sh4/cpu/sh7723.h b/arch/sh/include/cpu-sh4/cpu/sh7723.h
index 14c8ca93678..9b36fae7232 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7723.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7723.h
@@ -265,4 +265,21 @@ enum {
 	GPIO_FN_IDEA1, GPIO_FN_IDEA0,
 };
 
+enum {
+	HWBLK_UNKNOWN = 0,
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_L2C, HWBLK_ILMEM, HWBLK_FPU,
+	HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
+	HWBLK_HUDI, HWBLK_DBG, HWBLK_UBC, HWBLK_SUBC,
+	HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
+	HWBLK_FLCTL,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2,
+	HWBLK_SCIF3, HWBLK_SCIF4, HWBLK_SCIF5,
+	HWBLK_MSIOF0, HWBLK_MSIOF1, HWBLK_MERAM, HWBLK_IIC, HWBLK_RTC,
+	HWBLK_ATAPI, HWBLK_ADC, HWBLK_TPU, HWBLK_IRDA, HWBLK_TSIF, HWBLK_ICB,
+	HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_KEYSC, HWBLK_USB,
+	HWBLK_2DG, HWBLK_SIU, HWBLK_VEU2H1, HWBLK_VOU, HWBLK_BEU, HWBLK_CEU,
+	HWBLK_VEU2H0, HWBLK_VPU, HWBLK_LCDC,
+	HWBLK_NR,
+};
+
 #endif /* __ASM_SH7723_H__ */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 3cafda69637..1d7ae38bc61 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -26,7 +26,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o hwblk-sh7722.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o hwblk-sh7723.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7366.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index e67c2678b8a..bf64c78eee3 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7723.h>
 
 /* SH7723 registers */
 #define FRQCR		0xa4150000
@@ -140,60 +142,64 @@ struct clk div6_clks[] = {
 	SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT)
+#define R_CLK (&r_clk)
+#define P_CLK (&div4_clks[DIV4_P])
+#define B_CLK (&div4_clks[DIV4_B])
+#define U_CLK (&div4_clks[DIV4_U])
+#define I_CLK (&div4_clks[DIV4_I])
+#define SH_CLK (&div4_clks[DIV4_SH])
 
 static struct clk mstp_clks[] = {
 	/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
-	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0),
-	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0),
-	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0),
-	MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 28, 1, 1, 0),
-	MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0),
-	MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0),
-	MSTP("intc0", &div4_clks[DIV4_I], MSTPCR0, 22, 1, 1, 0),
-	MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1),
-	MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0),
-	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0),
-	MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0),
-	MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1),
-	MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 11, 0, 1, 0),
-	MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0),
-	MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0),
-	MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0),
-	MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0),
-	MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0),
-	MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0),
-	MSTP("meram0", &div4_clks[DIV4_SH], MSTPCR0, 0, 1, 1, 0),
-
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0),
-	MSTP("rtc0", &r_clk, MSTPCR1, 8, 0, 0, 0),
-
-	MSTP("atapi0", &div4_clks[DIV4_SH], MSTPCR2, 28, 0, 1, 0),
-	MSTP("adc0", &div4_clks[DIV4_P], MSTPCR2, 27, 0, 1, 0),
-	MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0),
-	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0),
-	MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0),
-	MSTP("icb0", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1),
-	MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0),
-	MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0),
-	MSTP("keysc0", &r_clk, MSTPCR2, 14, 0, 0, 0),
-	MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 11, 0, 1, 0),
-	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 10, 0, 1, 1),
-	MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0, 1, 0),
-	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1),
+	SH_HWBLK_CLK("tlb0", -1, I_CLK, HWBLK_TLB, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ic0", -1, I_CLK, HWBLK_IC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("oc0", -1, I_CLK, HWBLK_OC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("l2c0", -1, SH_CLK, HWBLK_L2C, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ilmem0", -1, I_CLK, HWBLK_ILMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("fpu0", -1, I_CLK, HWBLK_FPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("intc0", -1, I_CLK, HWBLK_INTC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("dmac0", -1, B_CLK, HWBLK_DMAC0, 0),
+	SH_HWBLK_CLK("sh0", -1, SH_CLK, HWBLK_SHYWAY, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("hudi0", -1, P_CLK, HWBLK_HUDI, 0),
+	SH_HWBLK_CLK("ubc0", -1, I_CLK, HWBLK_UBC, 0),
+	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU0, 0),
+	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
+	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
+	SH_HWBLK_CLK("dmac1", -1, B_CLK, HWBLK_DMAC1, 0),
+	SH_HWBLK_CLK("tmu1", -1, P_CLK, HWBLK_TMU1, 0),
+	SH_HWBLK_CLK("flctl0", -1, P_CLK, HWBLK_FLCTL, 0),
+	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
+	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
+	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
+	SH_HWBLK_CLK("scif3", -1, B_CLK, HWBLK_SCIF3, 0),
+	SH_HWBLK_CLK("scif4", -1, B_CLK, HWBLK_SCIF4, 0),
+	SH_HWBLK_CLK("scif5", -1, B_CLK, HWBLK_SCIF5, 0),
+	SH_HWBLK_CLK("msiof0", -1, B_CLK, HWBLK_MSIOF0, 0),
+	SH_HWBLK_CLK("msiof1", -1, B_CLK, HWBLK_MSIOF1, 0),
+	SH_HWBLK_CLK("meram0", -1, SH_CLK, HWBLK_MERAM, 0),
+
+	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC, 0),
+	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
+
+	SH_HWBLK_CLK("atapi0", -1, SH_CLK, HWBLK_ATAPI, 0),
+	SH_HWBLK_CLK("adc0", -1, P_CLK, HWBLK_ADC, 0),
+	SH_HWBLK_CLK("tpu0", -1, B_CLK, HWBLK_TPU, 0),
+	SH_HWBLK_CLK("irda0", -1, P_CLK, HWBLK_IRDA, 0),
+	SH_HWBLK_CLK("tsif0", -1, B_CLK, HWBLK_TSIF, 0),
+	SH_HWBLK_CLK("icb0", -1, B_CLK, HWBLK_ICB, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0),
+	SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0),
+	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
+	SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB, 0),
+	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
+	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
+	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU2H1, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
+	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
+	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU2H0, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
 };
 
 int __init arch_clk_init(void)
@@ -216,7 +222,7 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c
new file mode 100644
index 00000000000..a7f4684d203
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c
@@ -0,0 +1,117 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/hwblk-sh7723.c
+ *
+ * SH7723 hardware block support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7723.h>
+
+/* SH7723 registers */
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+
+/* SH7723 Power Domains */
+enum { CORE_AREA, SUB_AREA, CORE_AREA_BM };
+static struct hwblk_area sh7723_hwblk_area[] = {
+	[CORE_AREA] = HWBLK_AREA(0, 0),
+	[CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA),
+	[SUB_AREA] = HWBLK_AREA(0, 0),
+};
+
+/* Table mapping HWBLK to Module Stop Bit and Power Domain */
+static struct hwblk sh7723_hwblk[HWBLK_NR] = {
+	[HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA),
+	[HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA),
+	[HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA),
+	[HWBLK_L2C] = HWBLK(MSTPCR0, 28, CORE_AREA),
+	[HWBLK_ILMEM] = HWBLK(MSTPCR0, 27, CORE_AREA),
+	[HWBLK_FPU] = HWBLK(MSTPCR0, 24, CORE_AREA),
+	[HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA),
+	[HWBLK_DMAC0] = HWBLK(MSTPCR0, 21, CORE_AREA_BM),
+	[HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA),
+	[HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA),
+	[HWBLK_DBG] = HWBLK(MSTPCR0, 18, CORE_AREA),
+	[HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA),
+	[HWBLK_SUBC] = HWBLK(MSTPCR0, 16, CORE_AREA),
+	[HWBLK_TMU0] = HWBLK(MSTPCR0, 15, CORE_AREA),
+	[HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA),
+	[HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA),
+	[HWBLK_DMAC1] = HWBLK(MSTPCR0, 12, CORE_AREA_BM),
+	[HWBLK_TMU1] = HWBLK(MSTPCR0, 11, CORE_AREA),
+	[HWBLK_FLCTL] = HWBLK(MSTPCR0, 10, CORE_AREA),
+	[HWBLK_SCIF0] = HWBLK(MSTPCR0, 9, CORE_AREA),
+	[HWBLK_SCIF1] = HWBLK(MSTPCR0, 8, CORE_AREA),
+	[HWBLK_SCIF2] = HWBLK(MSTPCR0, 7, CORE_AREA),
+	[HWBLK_SCIF3] = HWBLK(MSTPCR0, 6, CORE_AREA),
+	[HWBLK_SCIF4] = HWBLK(MSTPCR0, 5, CORE_AREA),
+	[HWBLK_SCIF5] = HWBLK(MSTPCR0, 4, CORE_AREA),
+	[HWBLK_MSIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA),
+	[HWBLK_MSIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA),
+	[HWBLK_MERAM] = HWBLK(MSTPCR0, 0, CORE_AREA),
+
+	[HWBLK_IIC] = HWBLK(MSTPCR1, 9, CORE_AREA),
+	[HWBLK_RTC] = HWBLK(MSTPCR1, 8, SUB_AREA),
+
+	[HWBLK_ATAPI] = HWBLK(MSTPCR2, 28, CORE_AREA_BM),
+	[HWBLK_ADC] = HWBLK(MSTPCR2, 27, CORE_AREA),
+	[HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA),
+	[HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA),
+	[HWBLK_TSIF] = HWBLK(MSTPCR2, 22, CORE_AREA),
+	[HWBLK_ICB] = HWBLK(MSTPCR2, 21, CORE_AREA_BM),
+	[HWBLK_SDHI0] = HWBLK(MSTPCR2, 18, CORE_AREA),
+	[HWBLK_SDHI1] = HWBLK(MSTPCR2, 17, CORE_AREA),
+	[HWBLK_KEYSC] = HWBLK(MSTPCR2, 14, SUB_AREA),
+	[HWBLK_USB] = HWBLK(MSTPCR2, 11, CORE_AREA),
+	[HWBLK_2DG] = HWBLK(MSTPCR2, 10, CORE_AREA_BM),
+	[HWBLK_SIU] = HWBLK(MSTPCR2, 8, CORE_AREA),
+	[HWBLK_VEU2H1] = HWBLK(MSTPCR2, 6, CORE_AREA_BM),
+	[HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM),
+	[HWBLK_BEU] = HWBLK(MSTPCR2, 4, CORE_AREA_BM),
+	[HWBLK_CEU] = HWBLK(MSTPCR2, 3, CORE_AREA_BM),
+	[HWBLK_VEU2H0] = HWBLK(MSTPCR2, 2, CORE_AREA_BM),
+	[HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM),
+	[HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM),
+};
+
+static struct hwblk_info sh7723_hwblk_info = {
+	.areas = sh7723_hwblk_area,
+	.nr_areas = ARRAY_SIZE(sh7723_hwblk_area),
+	.hwblks = sh7723_hwblk,
+	.nr_hwblks = ARRAY_SIZE(sh7723_hwblk),
+};
+
+int arch_hwblk_sleep_mode(void)
+{
+	if (!sh7723_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_STANDBY | SUSP_SH_SF;
+
+	if (!sh7723_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_SLEEP | SUSP_SH_SF;
+
+	return SUSP_SH_SLEEP;
+}
+
+int __init arch_hwblk_init(void)
+{
+	return hwblk_register(&sh7723_hwblk_info);
+}
-- 
cgit v1.2.3


From 719a72b7c75bb239ca6184190ab994b71a31c6dc Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 17 Jul 2009 14:59:55 +0000
Subject: usb: r8a66597-hcd platform data on_chip support

Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c    | 1 +
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 2 +-
 3 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 8fed45a2fb8..4fb7e48e284 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -304,6 +304,7 @@ static struct platform_device sh_eth_device = {
 };
 
 static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
 };
 
 static struct resource sh7724_usb0_host_resources[] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index c18f7d09281..f6d20881356 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -40,7 +40,7 @@ static struct platform_device iic_device = {
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource usb_host_resources[] = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index e1bb80b2a27..28516499a2c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -398,7 +398,7 @@ static struct platform_device rtc_device = {
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource sh7723_usb_host_resources[] = {
-- 
cgit v1.2.3


From 6bde607e699b9f3c6fa5e4a97d78c7778e643b3d Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Mon, 20 Jul 2009 23:30:24 +0900
Subject: sh: Clean up linker script using new BSS_SECTION macro.

Updated to use the fixed BSS linker script macros from this
thread:

	http://www.spinics.net/lists/kernel/msg913238.html

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/vmlinux.lds.S | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 674ed8feb8a..80dc9f8d941 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -93,8 +93,7 @@ SECTIONS
 
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
-	BSS(PAGE_SIZE)
-	. = ALIGN(4);
+	BSS_SECTION(0, PAGE_SIZE, 4)
 	_ebss = .;			/* uClinux MTD sucks */
 	_end = . ;
 
-- 
cgit v1.2.3


From 4d4036e0e7299c6cbb2d2421b4b30b7a409ce61a Mon Sep 17 00:00:00 2001
From: Jason Yeh <jason.yeh@amd.com>
Date: Wed, 8 Jul 2009 13:49:38 +0200
Subject: oprofile: Implement performance counter multiplexing

The number of hardware counters is limited. The multiplexing feature
enables OProfile to gather more events than counters are provided by
the hardware. This is realized by switching between events at an user
specified time interval.

A new file (/dev/oprofile/time_slice) is added for the user to specify
the timer interval in ms. If the number of events to profile is higher
than the number of hardware counters available, the patch will
schedule a work queue that switches the event counter and re-writes
the different sets of values into it. The switching mechanism needs to
be implemented for each architecture to support multiplexing. This
patch only implements AMD CPU support, but multiplexing can be easily
extended for other models and architectures.

There are follow-on patches that rework parts of this patch.

Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/Kconfig                      |  12 +++
 arch/x86/oprofile/nmi_int.c       | 162 ++++++++++++++++++++++++++++++++++++--
 arch/x86/oprofile/op_counter.h    |   2 +-
 arch/x86/oprofile/op_model_amd.c  | 110 ++++++++++++++++++++++----
 arch/x86/oprofile/op_model_p4.c   |   4 +
 arch/x86/oprofile/op_model_ppro.c |   2 +
 arch/x86/oprofile/op_x86_model.h  |   7 ++
 7 files changed, 279 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/Kconfig b/arch/Kconfig
index 99193b16023..beea3ccebb5 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -30,6 +30,18 @@ config OPROFILE_IBS
 
 	  If unsure, say N.
 
+config OPROFILE_EVENT_MULTIPLEX
+	bool "OProfile multiplexing support (EXPERIMENTAL)"
+	default n
+	depends on OPROFILE && X86
+	help
+	  The number of hardware counters is limited. The multiplexing
+	  feature enables OProfile to gather more events than counters
+	  are provided by the hardware. This is realized by switching
+	  between events at an user specified time interval.
+
+	  If unsure, say N.
+
 config HAVE_OPROFILE
 	bool
 
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index fca8dc94531..e54f6a0b35a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -1,11 +1,14 @@
 /**
  * @file nmi_int.c
  *
- * @remark Copyright 2002-2008 OProfile authors
+ * @remark Copyright 2002-2009 OProfile authors
  * @remark Read the file COPYING
  *
  * @author John Levon <levon@movementarian.org>
  * @author Robert Richter <robert.richter@amd.com>
+ * @author Barry Kasindorf <barry.kasindorf@amd.com>
+ * @author Jason Yeh <jason.yeh@amd.com>
+ * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
  */
 
 #include <linux/init.h>
@@ -24,6 +27,12 @@
 #include "op_counter.h"
 #include "op_x86_model.h"
 
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+DEFINE_PER_CPU(int, switch_index);
+#endif
+
+
 static struct op_x86_model_spec const *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
@@ -31,6 +40,13 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+extern atomic_t multiplex_counter;
+#endif
+
+struct op_counter_config counter_config[OP_MAX_COUNTER];
+
 /* common functions */
 
 u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
@@ -95,6 +111,11 @@ static void free_msrs(void)
 		per_cpu(cpu_msrs, i).counters = NULL;
 		kfree(per_cpu(cpu_msrs, i).controls);
 		per_cpu(cpu_msrs, i).controls = NULL;
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		kfree(per_cpu(cpu_msrs, i).multiplex);
+		per_cpu(cpu_msrs, i).multiplex = NULL;
+#endif
 	}
 }
 
@@ -103,6 +124,9 @@ static int allocate_msrs(void)
 	int success = 1;
 	size_t controls_size = sizeof(struct op_msr) * model->num_controls;
 	size_t counters_size = sizeof(struct op_msr) * model->num_counters;
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	size_t multiplex_size = sizeof(struct op_msr) * model->num_virt_counters;
+#endif
 
 	int i;
 	for_each_possible_cpu(i) {
@@ -118,6 +142,14 @@ static int allocate_msrs(void)
 			success = 0;
 			break;
 		}
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		per_cpu(cpu_msrs, i).multiplex =
+				kmalloc(multiplex_size, GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).multiplex) {
+			success = 0;
+			break;
+		}
+#endif
 	}
 
 	if (!success)
@@ -126,6 +158,25 @@ static int allocate_msrs(void)
 	return success;
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void nmi_setup_cpu_mux(struct op_msrs const * const msrs)
+{
+	int i;
+	struct op_msr *multiplex = msrs->multiplex;
+
+	for (i = 0; i < model->num_virt_counters; ++i) {
+		if (counter_config[i].enabled) {
+			multiplex[i].saved = -(u64)counter_config[i].count;
+		} else {
+			multiplex[i].addr  = 0;
+			multiplex[i].saved = 0;
+		}
+	}
+}
+
+#endif
+
 static void nmi_cpu_setup(void *dummy)
 {
 	int cpu = smp_processor_id();
@@ -133,6 +184,9 @@ static void nmi_cpu_setup(void *dummy)
 	nmi_cpu_save_registers(msrs);
 	spin_lock(&oprofilefs_lock);
 	model->setup_ctrs(model, msrs);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	nmi_setup_cpu_mux(msrs);
+#endif
 	spin_unlock(&oprofilefs_lock);
 	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
@@ -173,14 +227,52 @@ static int nmi_setup(void)
 			memcpy(per_cpu(cpu_msrs, cpu).controls,
 				per_cpu(cpu_msrs, 0).controls,
 				sizeof(struct op_msr) * model->num_controls);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+			memcpy(per_cpu(cpu_msrs, cpu).multiplex,
+				per_cpu(cpu_msrs, 0).multiplex,
+				sizeof(struct op_msr) * model->num_virt_counters);
+#endif
 		}
-
 	}
 	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
 	return 0;
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
+{
+	unsigned int si = __get_cpu_var(switch_index);
+	struct op_msr *multiplex = msrs->multiplex;
+	unsigned int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int offset = i + si;
+		if (multiplex[offset].addr) {
+			rdmsrl(multiplex[offset].addr,
+			       multiplex[offset].saved);
+		}
+	}
+}
+
+static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
+{
+	unsigned int si = __get_cpu_var(switch_index);
+	struct op_msr *multiplex = msrs->multiplex;
+	unsigned int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int offset = i + si;
+		if (multiplex[offset].addr) {
+			wrmsrl(multiplex[offset].addr,
+			       multiplex[offset].saved);
+		}
+	}
+}
+
+#endif
+
 static void nmi_cpu_restore_registers(struct op_msrs *msrs)
 {
 	struct op_msr *counters = msrs->counters;
@@ -214,6 +306,9 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
 	nmi_cpu_restore_registers(msrs);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	__get_cpu_var(switch_index) = 0;
+#endif
 }
 
 static void nmi_shutdown(void)
@@ -252,16 +347,15 @@ static void nmi_stop(void)
 	on_each_cpu(nmi_cpu_stop, NULL, 1);
 }
 
-struct op_counter_config counter_config[OP_MAX_COUNTER];
-
 static int nmi_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
 
-	for (i = 0; i < model->num_counters; ++i) {
+	for (i = 0; i < model->num_virt_counters; ++i) {
 		struct dentry *dir;
 		char buf[4];
 
+#ifndef CONFIG_OPROFILE_EVENT_MULTIPLEX
 		/* quick little hack to _not_ expose a counter if it is not
 		 * available for use.  This should protect userspace app.
 		 * NOTE:  assumes 1:1 mapping here (that counters are organized
@@ -269,6 +363,7 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 		 */
 		if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i)))
 			continue;
+#endif /* CONFIG_OPROFILE_EVENT_MULTIPLEX */
 
 		snprintf(buf,  sizeof(buf), "%d", i);
 		dir = oprofilefs_mkdir(sb, root, buf);
@@ -283,6 +378,57 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void nmi_cpu_switch(void *dummy)
+{
+	int cpu = smp_processor_id();
+	int si = per_cpu(switch_index, cpu);
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+	nmi_cpu_stop(NULL);
+	nmi_cpu_save_mpx_registers(msrs);
+
+	/* move to next set */
+	si += model->num_counters;
+	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+		per_cpu(switch_index, cpu) = 0;
+	else
+		per_cpu(switch_index, cpu) = si;
+
+	model->switch_ctrl(model, msrs);
+	nmi_cpu_restore_mpx_registers(msrs);
+
+	nmi_cpu_start(NULL);
+}
+
+
+/*
+ * Quick check to see if multiplexing is necessary.
+ * The check should be sufficient since counters are used
+ * in ordre.
+ */
+static int nmi_multiplex_on(void)
+{
+	return counter_config[model->num_counters].count ? 0 : -EINVAL;
+}
+
+static int nmi_switch_event(void)
+{
+	if (!model->switch_ctrl)
+		return -ENOSYS;		/* not implemented */
+	if (nmi_multiplex_on() < 0)
+		return -EINVAL;		/* not necessary */
+
+	on_each_cpu(nmi_cpu_switch, NULL, 1);
+
+	atomic_inc(&multiplex_counter);
+
+	return 0;
+}
+
+#endif
+
 #ifdef CONFIG_SMP
 static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 				 void *data)
@@ -516,12 +662,18 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	register_cpu_notifier(&oprofile_cpu_nb);
 #endif
 	/* default values, can be overwritten by model */
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	__raw_get_cpu_var(switch_index) = 0;
+#endif
 	ops->create_files	= nmi_create_files;
 	ops->setup		= nmi_setup;
 	ops->shutdown		= nmi_shutdown;
 	ops->start		= nmi_start;
 	ops->stop		= nmi_stop;
 	ops->cpu_type		= cpu_type;
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	ops->switch_events	= nmi_switch_event;
+#endif
 
 	if (model->init)
 		ret = model->init(ops);
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index 91b6a116165..e28398df0df 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -10,7 +10,7 @@
 #ifndef OP_COUNTER_H
 #define OP_COUNTER_H
 
-#define OP_MAX_COUNTER 8
+#define OP_MAX_COUNTER 32
 
 /* Per-perfctr configuration as set via
  * oprofilefs.
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index f676f8825a3..fdbed3a0c87 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -9,12 +9,15 @@
  * @author Philippe Elie
  * @author Graydon Hoare
  * @author Robert Richter <robert.richter@amd.com>
- * @author Barry Kasindorf
+ * @author Barry Kasindorf <barry.kasindorf@amd.com>
+ * @author Jason Yeh <jason.yeh@amd.com>
+ * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
  */
 
 #include <linux/oprofile.h>
 #include <linux/device.h>
 #include <linux/pci.h>
+#include <linux/percpu.h>
 
 #include <asm/ptrace.h>
 #include <asm/msr.h>
@@ -25,12 +28,23 @@
 
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+#define NUM_VIRT_COUNTERS 32
+#define NUM_VIRT_CONTROLS 32
+#else
+#define NUM_VIRT_COUNTERS NUM_COUNTERS
+#define NUM_VIRT_CONTROLS NUM_CONTROLS
+#endif
+
 #define OP_EVENT_MASK			0x0FFF
 #define OP_CTR_OVERFLOW			(1ULL<<31)
 
 #define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
-static unsigned long reset_value[NUM_COUNTERS];
+static unsigned long reset_value[NUM_VIRT_COUNTERS];
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+DECLARE_PER_CPU(int, switch_index);
+#endif
 
 #ifdef CONFIG_OPROFILE_IBS
 
@@ -82,6 +96,16 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 		else
 			msrs->controls[i].addr = 0;
 	}
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
+		int hw_counter = i % NUM_CONTROLS;
+		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
+		else
+			msrs->multiplex[i].addr = 0;
+	}
+#endif
 }
 
 static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
@@ -90,6 +114,15 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	u64 val;
 	int i;
 
+	/* setup reset_value */
+	for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
+		if (counter_config[i].enabled) {
+			reset_value[i] = counter_config[i].count;
+		} else {
+			reset_value[i] = 0;
+		}
+	}
+
 	/* clear all counters */
 	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!msrs->controls[i].addr))
@@ -108,20 +141,49 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (counter_config[i].enabled && msrs->counters[i].addr) {
-			reset_value[i] = counter_config[i].count;
-			wrmsrl(msrs->counters[i].addr,
-			       -(u64)counter_config[i].count);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		int offset = i + __get_cpu_var(switch_index);
+#else
+		int offset = i;
+#endif
+		if (counter_config[offset].enabled && msrs->counters[i].addr) {
+			/* setup counter registers */
+			wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
+
+			/* setup control registers */
 			rdmsrl(msrs->controls[i].addr, val);
 			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[i]);
+			val |= op_x86_get_ctrl(model, &counter_config[offset]);
+			wrmsrl(msrs->controls[i].addr, val);
+		}
+	}
+}
+
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void op_amd_switch_ctrl(struct op_x86_model_spec const *model,
+			       struct op_msrs const * const msrs)
+{
+	u64 val;
+	int i;
+
+	/* enable active counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		int offset = i + __get_cpu_var(switch_index);
+		if (counter_config[offset].enabled) {
+			/* setup control registers */
+			rdmsrl(msrs->controls[i].addr, val);
+			val &= model->reserved;
+			val |= op_x86_get_ctrl(model, &counter_config[offset]);
 			wrmsrl(msrs->controls[i].addr, val);
-		} else {
-			reset_value[i] = 0;
 		}
 	}
 }
 
+#endif
+
+
 #ifdef CONFIG_OPROFILE_IBS
 
 static inline int
@@ -230,14 +292,19 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (!reset_value[i])
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		int offset = i + __get_cpu_var(switch_index);
+#else
+		int offset = i;
+#endif
+		if (!reset_value[offset])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
 		/* bit is clear if overflowed: */
 		if (val & OP_CTR_OVERFLOW)
 			continue;
-		oprofile_add_sample(regs, i);
-		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[i]);
+		oprofile_add_sample(regs, offset);
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
@@ -250,8 +317,14 @@ static void op_amd_start(struct op_msrs const * const msrs)
 {
 	u64 val;
 	int i;
+
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (reset_value[i]) {
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		int offset = i + __get_cpu_var(switch_index);
+#else
+		int offset = i;
+#endif
+		if (reset_value[offset]) {
 			rdmsrl(msrs->controls[i].addr, val);
 			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
 			wrmsrl(msrs->controls[i].addr, val);
@@ -271,7 +344,11 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	 * pm callback
 	 */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		if (!reset_value[i + per_cpu(switch_index, smp_processor_id())])
+#else
 		if (!reset_value[i])
+#endif
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
@@ -289,7 +366,7 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
-	for (i = 0; i < NUM_CONTROLS; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
@@ -463,6 +540,8 @@ static void op_amd_exit(void) {}
 struct op_x86_model_spec const op_amd_spec = {
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
+	.num_virt_counters	= NUM_VIRT_COUNTERS,
+	.num_virt_controls	= NUM_VIRT_CONTROLS,
 	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
 	.event_mask		= OP_EVENT_MASK,
 	.init			= op_amd_init,
@@ -473,4 +552,7 @@ struct op_x86_model_spec const op_amd_spec = {
 	.start			= &op_amd_start,
 	.stop			= &op_amd_stop,
 	.shutdown		= &op_amd_shutdown,
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	.switch_ctrl		= &op_amd_switch_ctrl,
+#endif
 };
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 5921b7fc724..65b9237cde8 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -698,6 +698,8 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec const op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
+	.num_virt_counters	= NUM_COUNTERS_HT2,
+	.num_virt_controls	= NUM_CONTROLS_HT2,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
@@ -710,6 +712,8 @@ struct op_x86_model_spec const op_p4_ht2_spec = {
 struct op_x86_model_spec const op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
+	.num_virt_counters	= NUM_COUNTERS_NON_HT,
+	.num_virt_controls	= NUM_CONTROLS_NON_HT,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 570d717c330..098cbca5c0b 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -206,6 +206,8 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec const op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
+	.num_virt_counters	= 2,
+	.num_virt_controls	= 2,
 	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 505489873b9..0d07d23cb06 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -23,6 +23,7 @@ struct op_msr {
 struct op_msrs {
 	struct op_msr *counters;
 	struct op_msr *controls;
+	struct op_msr *multiplex;
 };
 
 struct pt_regs;
@@ -35,6 +36,8 @@ struct oprofile_operations;
 struct op_x86_model_spec {
 	unsigned int	num_counters;
 	unsigned int	num_controls;
+	unsigned int	num_virt_counters;
+	unsigned int	num_virt_controls;
 	u64		reserved;
 	u16		event_mask;
 	int		(*init)(struct oprofile_operations *ops);
@@ -47,6 +50,10 @@ struct op_x86_model_spec {
 	void		(*start)(struct op_msrs const * const msrs);
 	void		(*stop)(struct op_msrs const * const msrs);
 	void		(*shutdown)(struct op_msrs const * const msrs);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	void		(*switch_ctrl)(struct op_x86_model_spec const *model,
+				       struct op_msrs const * const msrs);
+#endif
 };
 
 struct op_counter_config;
-- 
cgit v1.2.3


From 5e766e3e433fa2d5d2fdfd8e2432804c91393387 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 8 Jul 2009 14:54:17 +0200
Subject: x86/oprofile: Fix usage of NUM_CONTROLS/NUM_COUNTERS macros

Use the corresponding macros when iterating over counter and control
registers. Since NUM_CONTROLS and NUM_COUNTERS are equal for AMD cpus
the fix is more a cosmetical change.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index fdbed3a0c87..dcfd4505cac 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -99,7 +99,7 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
-		int hw_counter = i % NUM_CONTROLS;
+		int hw_counter = i % NUM_COUNTERS;
 		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
 			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
 		else
@@ -366,7 +366,7 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
-- 
cgit v1.2.3


From 82a225283fb0d9438549595d9e6f3ecc42b42ad6 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 16:29:34 +0200
Subject: x86/oprofile: Use per_cpu() instead of __get_cpu_var()

__get_cpu_var() calls smp_processor_id(). When the cpu id is already
known, instead use per_cpu() to avoid generating the id again.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index e54f6a0b35a..8cd4658370b 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -294,7 +294,7 @@ static void nmi_cpu_shutdown(void *dummy)
 {
 	unsigned int v;
 	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &__get_cpu_var(cpu_msrs);
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
 
 	/* restoring APIC_LVTPC can trigger an apic error because the delivery
 	 * mode and vector nr combination can be illegal. That's by design: on
@@ -307,7 +307,7 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTERR, v);
 	nmi_cpu_restore_registers(msrs);
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	__get_cpu_var(switch_index) = 0;
+	per_cpu(switch_index, cpu) = 0;
 #endif
 }
 
-- 
cgit v1.2.3


From 6bfccd099c2841e1c42530f1b6d2553bfa13be3a Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 19:23:50 +0200
Subject: x86/oprofile: Fix initialization of switch_index

Variable switch_index must be initialized for each cpu. This patch
fixes the initialization by moving it to the per-cpu init function
nmi_cpu_setup().

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 8cd4658370b..b211d335e07 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -160,7 +160,7 @@ static int allocate_msrs(void)
 
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 
-static void nmi_setup_cpu_mux(struct op_msrs const * const msrs)
+static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 {
 	int i;
 	struct op_msr *multiplex = msrs->multiplex;
@@ -173,8 +173,15 @@ static void nmi_setup_cpu_mux(struct op_msrs const * const msrs)
 			multiplex[i].saved = 0;
 		}
 	}
+
+	per_cpu(switch_index, cpu) = 0;
 }
 
+#else
+
+static inline void
+nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
+
 #endif
 
 static void nmi_cpu_setup(void *dummy)
@@ -184,9 +191,7 @@ static void nmi_cpu_setup(void *dummy)
 	nmi_cpu_save_registers(msrs);
 	spin_lock(&oprofilefs_lock);
 	model->setup_ctrs(model, msrs);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	nmi_setup_cpu_mux(msrs);
-#endif
+	nmi_cpu_setup_mux(cpu, msrs);
 	spin_unlock(&oprofilefs_lock);
 	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
@@ -662,9 +667,6 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	register_cpu_notifier(&oprofile_cpu_nb);
 #endif
 	/* default values, can be overwritten by model */
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	__raw_get_cpu_var(switch_index) = 0;
-#endif
 	ops->create_files	= nmi_create_files;
 	ops->setup		= nmi_setup;
 	ops->shutdown		= nmi_shutdown;
-- 
cgit v1.2.3


From d8471ad3ab613a1ba7abd3aad46659de39a2871c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 16 Jul 2009 13:04:43 +0200
Subject: oprofile: Introduce op_x86_phys_to_virt()

This new function translates physical to virtual counter numbers.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c      | 43 +++++++++++----------
 arch/x86/oprofile/op_model_amd.c | 80 ++++++++++++++++------------------------
 arch/x86/oprofile/op_x86_model.h |  1 +
 3 files changed, 55 insertions(+), 69 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b211d335e07..02b57b8d0e6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -27,12 +27,6 @@
 #include "op_counter.h"
 #include "op_x86_model.h"
 
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-DEFINE_PER_CPU(int, switch_index);
-#endif
-
-
 static struct op_x86_model_spec const *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
@@ -103,6 +97,21 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	}
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static DEFINE_PER_CPU(int, switch_index);
+
+inline int op_x86_phys_to_virt(int phys)
+{
+	return __get_cpu_var(switch_index) + phys;
+}
+
+#else
+
+inline int op_x86_phys_to_virt(int phys) { return phys; }
+
+#endif
+
 static void free_msrs(void)
 {
 	int i;
@@ -248,31 +257,25 @@ static int nmi_setup(void)
 
 static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
 {
-	unsigned int si = __get_cpu_var(switch_index);
 	struct op_msr *multiplex = msrs->multiplex;
-	unsigned int i;
+	int i;
 
 	for (i = 0; i < model->num_counters; ++i) {
-		int offset = i + si;
-		if (multiplex[offset].addr) {
-			rdmsrl(multiplex[offset].addr,
-			       multiplex[offset].saved);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
 	}
 }
 
 static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
 {
-	unsigned int si = __get_cpu_var(switch_index);
 	struct op_msr *multiplex = msrs->multiplex;
-	unsigned int i;
+	int i;
 
 	for (i = 0; i < model->num_counters; ++i) {
-		int offset = i + si;
-		if (multiplex[offset].addr) {
-			wrmsrl(multiplex[offset].addr,
-			       multiplex[offset].saved);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
 	}
 }
 
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index dcfd4505cac..67f830d12e0 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -42,9 +42,6 @@
 #define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
 static unsigned long reset_value[NUM_VIRT_COUNTERS];
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-DECLARE_PER_CPU(int, switch_index);
-#endif
 
 #ifdef CONFIG_OPROFILE_IBS
 
@@ -141,21 +138,20 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		int offset = i + __get_cpu_var(switch_index);
-#else
-		int offset = i;
-#endif
-		if (counter_config[offset].enabled && msrs->counters[i].addr) {
-			/* setup counter registers */
-			wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
-
-			/* setup control registers */
-			rdmsrl(msrs->controls[i].addr, val);
-			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[offset]);
-			wrmsrl(msrs->controls[i].addr, val);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (!counter_config[virt].enabled)
+			continue;
+		if (!msrs->counters[i].addr)
+			continue;
+
+		/* setup counter registers */
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
+
+		/* setup control registers */
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
 
@@ -170,14 +166,13 @@ static void op_amd_switch_ctrl(struct op_x86_model_spec const *model,
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		int offset = i + __get_cpu_var(switch_index);
-		if (counter_config[offset].enabled) {
-			/* setup control registers */
-			rdmsrl(msrs->controls[i].addr, val);
-			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[offset]);
-			wrmsrl(msrs->controls[i].addr, val);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (!counter_config[virt].enabled)
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
 
@@ -292,19 +287,15 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		int offset = i + __get_cpu_var(switch_index);
-#else
-		int offset = i;
-#endif
-		if (!reset_value[offset])
+		int virt = op_x86_phys_to_virt(i);
+		if (!reset_value[virt])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
 		/* bit is clear if overflowed: */
 		if (val & OP_CTR_OVERFLOW)
 			continue;
-		oprofile_add_sample(regs, offset);
-		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
+		oprofile_add_sample(regs, virt);
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
@@ -319,16 +310,11 @@ static void op_amd_start(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		int offset = i + __get_cpu_var(switch_index);
-#else
-		int offset = i;
-#endif
-		if (reset_value[offset]) {
-			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-			wrmsrl(msrs->controls[i].addr, val);
-		}
+		if (!reset_value[op_x86_phys_to_virt(i)])
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	op_amd_start_ibs();
@@ -344,11 +330,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	 * pm callback
 	 */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		if (!reset_value[i + per_cpu(switch_index, smp_processor_id())])
-#else
-		if (!reset_value[i])
-#endif
+		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 0d07d23cb06..e874dc3565a 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -60,6 +60,7 @@ struct op_counter_config;
 
 extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 			   struct op_counter_config *counter_config);
+extern int op_x86_phys_to_virt(int phys);
 
 extern struct op_x86_model_spec const op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
-- 
cgit v1.2.3


From 7e7478c6bc0e011d2854b21f190cc3a1dba89905 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 16 Jul 2009 13:09:53 +0200
Subject: oprofile: Grouping multiplexing code in op_model_amd.c

This patch moves some multiplexing code to the new function
op_mux_fill_in_addresses(). Also, the whole multiplexing code is now
at a single location.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 75 ++++++++++++++++++++++------------------
 1 file changed, 41 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 67f830d12e0..644980f0392 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -74,6 +74,45 @@ static struct op_ibs_config ibs_config;
 
 #endif
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void op_mux_fill_in_addresses(struct op_msrs * const msrs)
+{
+	int i;
+
+	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
+		int hw_counter = i % NUM_COUNTERS;
+		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
+		else
+			msrs->multiplex[i].addr = 0;
+	}
+}
+
+static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
+			       struct op_msrs const * const msrs)
+{
+	u64 val;
+	int i;
+
+	/* enable active counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (!counter_config[virt].enabled)
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
+	}
+}
+
+#else
+
+static inline void op_mux_fill_in_addresses(struct op_msrs * const msrs) { }
+
+#endif
+
 /* functions for op_amd_spec */
 
 static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
@@ -94,15 +133,7 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 			msrs->controls[i].addr = 0;
 	}
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
-		int hw_counter = i % NUM_COUNTERS;
-		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
-			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
-		else
-			msrs->multiplex[i].addr = 0;
-	}
-#endif
+	op_mux_fill_in_addresses(msrs);
 }
 
 static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
@@ -155,30 +186,6 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 }
 
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void op_amd_switch_ctrl(struct op_x86_model_spec const *model,
-			       struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (!counter_config[virt].enabled)
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= model->reserved;
-		val |= op_x86_get_ctrl(model, &counter_config[virt]);
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-}
-
-#endif
-
-
 #ifdef CONFIG_OPROFILE_IBS
 
 static inline int
@@ -535,6 +542,6 @@ struct op_x86_model_spec const op_amd_spec = {
 	.stop			= &op_amd_stop,
 	.shutdown		= &op_amd_shutdown,
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	.switch_ctrl		= &op_amd_switch_ctrl,
+	.switch_ctrl		= &op_mux_switch_ctrl,
 #endif
 };
-- 
cgit v1.2.3


From 6ab82f958a5dca591a6ea17a3ca6f2aca06f4f2f Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:40:04 +0200
Subject: x86/oprofile: Implement multiplexing setup/shutdown functions

This patch implements nmi_setup_mux() and nmi_shutdown_mux() functions
to setup/shutdown multiplexing. Multiplexing code in nmi_int.c is now
much more separated.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 76 ++++++++++++++++++++++++---------------------
 1 file changed, 40 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 02b57b8d0e6..674fa37d150 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -106,9 +106,35 @@ inline int op_x86_phys_to_virt(int phys)
 	return __get_cpu_var(switch_index) + phys;
 }
 
+static void nmi_shutdown_mux(void)
+{
+	int i;
+	for_each_possible_cpu(i) {
+		kfree(per_cpu(cpu_msrs, i).multiplex);
+		per_cpu(cpu_msrs, i).multiplex = NULL;
+		per_cpu(switch_index, i) = 0;
+	}
+}
+
+static int nmi_setup_mux(void)
+{
+	size_t multiplex_size =
+		sizeof(struct op_msr) * model->num_virt_counters;
+	int i;
+	for_each_possible_cpu(i) {
+		per_cpu(cpu_msrs, i).multiplex =
+			kmalloc(multiplex_size, GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).multiplex)
+			return 0;
+	}
+	return 1;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
+static inline void nmi_shutdown_mux(void) { }
+static inline int nmi_setup_mux(void) { return 1; }
 
 #endif
 
@@ -120,51 +146,27 @@ static void free_msrs(void)
 		per_cpu(cpu_msrs, i).counters = NULL;
 		kfree(per_cpu(cpu_msrs, i).controls);
 		per_cpu(cpu_msrs, i).controls = NULL;
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		kfree(per_cpu(cpu_msrs, i).multiplex);
-		per_cpu(cpu_msrs, i).multiplex = NULL;
-#endif
 	}
 }
 
 static int allocate_msrs(void)
 {
-	int success = 1;
 	size_t controls_size = sizeof(struct op_msr) * model->num_controls;
 	size_t counters_size = sizeof(struct op_msr) * model->num_counters;
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	size_t multiplex_size = sizeof(struct op_msr) * model->num_virt_counters;
-#endif
 
 	int i;
 	for_each_possible_cpu(i) {
 		per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
-								GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).counters) {
-			success = 0;
-			break;
-		}
+							GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).counters)
+			return 0;
 		per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
-								GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).controls) {
-			success = 0;
-			break;
-		}
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		per_cpu(cpu_msrs, i).multiplex =
-				kmalloc(multiplex_size, GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).multiplex) {
-			success = 0;
-			break;
-		}
-#endif
+							GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).controls)
+			return 0;
 	}
 
-	if (!success)
-		free_msrs();
-
-	return success;
+	return 1;
 }
 
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
@@ -218,11 +220,15 @@ static int nmi_setup(void)
 	int cpu;
 
 	if (!allocate_msrs())
-		return -ENOMEM;
+		err = -ENOMEM;
+	else if (!nmi_setup_mux())
+		err = -ENOMEM;
+	else
+		err = register_die_notifier(&profile_exceptions_nb);
 
-	err = register_die_notifier(&profile_exceptions_nb);
 	if (err) {
 		free_msrs();
+		nmi_shutdown_mux();
 		return err;
 	}
 
@@ -314,9 +320,6 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
 	nmi_cpu_restore_registers(msrs);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	per_cpu(switch_index, cpu) = 0;
-#endif
 }
 
 static void nmi_shutdown(void)
@@ -326,6 +329,7 @@ static void nmi_shutdown(void)
 	nmi_enabled = 0;
 	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
+	nmi_shutdown_mux();
 	msrs = &get_cpu_var(cpu_msrs);
 	model->shutdown(msrs);
 	free_msrs();
-- 
cgit v1.2.3


From 48fb4b46712c7d3e8adc79826311abd9ccbf7f1d Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:38:49 +0200
Subject: x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c

This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 45 +++++++++++++++++++--------------------------
 1 file changed, 19 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 674fa37d150..b1edfc922e7 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -130,11 +130,30 @@ static int nmi_setup_mux(void)
 	return 1;
 }
 
+static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
+{
+	int i;
+	struct op_msr *multiplex = msrs->multiplex;
+
+	for (i = 0; i < model->num_virt_counters; ++i) {
+		if (counter_config[i].enabled) {
+			multiplex[i].saved = -(u64)counter_config[i].count;
+		} else {
+			multiplex[i].addr  = 0;
+			multiplex[i].saved = 0;
+		}
+	}
+
+	per_cpu(switch_index, cpu) = 0;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
 static inline void nmi_shutdown_mux(void) { }
 static inline int nmi_setup_mux(void) { return 1; }
+static inline void
+nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
 
 #endif
 
@@ -169,32 +188,6 @@ static int allocate_msrs(void)
 	return 1;
 }
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
-{
-	int i;
-	struct op_msr *multiplex = msrs->multiplex;
-
-	for (i = 0; i < model->num_virt_counters; ++i) {
-		if (counter_config[i].enabled) {
-			multiplex[i].saved = -(u64)counter_config[i].count;
-		} else {
-			multiplex[i].addr  = 0;
-			multiplex[i].saved = 0;
-		}
-	}
-
-	per_cpu(switch_index, cpu) = 0;
-}
-
-#else
-
-static inline void
-nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
-
-#endif
-
 static void nmi_cpu_setup(void *dummy)
 {
 	int cpu = smp_processor_id();
-- 
cgit v1.2.3


From d0f585dd20010f8479e56b5c6f391ef18e26877e Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:38:49 +0200
Subject: x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in
 nmi_int.c

This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 52 +++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b1edfc922e7..f38c5cf0fdb 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -147,6 +147,30 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 	per_cpu(switch_index, cpu) = 0;
 }
 
+static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
+{
+	struct op_msr *multiplex = msrs->multiplex;
+	int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
+	}
+}
+
+static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
+{
+	struct op_msr *multiplex = msrs->multiplex;
+	int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
+	}
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -252,34 +276,6 @@ static int nmi_setup(void)
 	return 0;
 }
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
-{
-	struct op_msr *multiplex = msrs->multiplex;
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (multiplex[virt].addr)
-			rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
-	}
-}
-
-static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
-{
-	struct op_msr *multiplex = msrs->multiplex;
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (multiplex[virt].addr)
-			wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
-	}
-}
-
-#endif
-
 static void nmi_cpu_restore_registers(struct op_msrs *msrs)
 {
 	struct op_msr *counters = msrs->counters;
-- 
cgit v1.2.3


From b28d1b923ab52d535c0719155dccf3b3d98bab9f Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:38:49 +0200
Subject: x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c

This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 144 +++++++++++++++++++++-----------------------
 1 file changed, 70 insertions(+), 74 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index f38c5cf0fdb..998c7dca31e 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -97,6 +97,29 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	}
 }
 
+static void nmi_cpu_start(void *dummy)
+{
+	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
+	model->start(msrs);
+}
+
+static int nmi_start(void)
+{
+	on_each_cpu(nmi_cpu_start, NULL, 1);
+	return 0;
+}
+
+static void nmi_cpu_stop(void *dummy)
+{
+	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
+	model->stop(msrs);
+}
+
+static void nmi_stop(void)
+{
+	on_each_cpu(nmi_cpu_stop, NULL, 1);
+}
+
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 
 static DEFINE_PER_CPU(int, switch_index);
@@ -171,6 +194,53 @@ static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
 	}
 }
 
+static void nmi_cpu_switch(void *dummy)
+{
+	int cpu = smp_processor_id();
+	int si = per_cpu(switch_index, cpu);
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+	nmi_cpu_stop(NULL);
+	nmi_cpu_save_mpx_registers(msrs);
+
+	/* move to next set */
+	si += model->num_counters;
+	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+		per_cpu(switch_index, cpu) = 0;
+	else
+		per_cpu(switch_index, cpu) = si;
+
+	model->switch_ctrl(model, msrs);
+	nmi_cpu_restore_mpx_registers(msrs);
+
+	nmi_cpu_start(NULL);
+}
+
+
+/*
+ * Quick check to see if multiplexing is necessary.
+ * The check should be sufficient since counters are used
+ * in ordre.
+ */
+static int nmi_multiplex_on(void)
+{
+	return counter_config[model->num_counters].count ? 0 : -EINVAL;
+}
+
+static int nmi_switch_event(void)
+{
+	if (!model->switch_ctrl)
+		return -ENOSYS;		/* not implemented */
+	if (nmi_multiplex_on() < 0)
+		return -EINVAL;		/* not necessary */
+
+	on_each_cpu(nmi_cpu_switch, NULL, 1);
+
+	atomic_inc(&multiplex_counter);
+
+	return 0;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -325,29 +395,6 @@ static void nmi_shutdown(void)
 	put_cpu_var(cpu_msrs);
 }
 
-static void nmi_cpu_start(void *dummy)
-{
-	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
-	model->start(msrs);
-}
-
-static int nmi_start(void)
-{
-	on_each_cpu(nmi_cpu_start, NULL, 1);
-	return 0;
-}
-
-static void nmi_cpu_stop(void *dummy)
-{
-	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
-	model->stop(msrs);
-}
-
-static void nmi_stop(void)
-{
-	on_each_cpu(nmi_cpu_stop, NULL, 1);
-}
-
 static int nmi_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
@@ -379,57 +426,6 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void nmi_cpu_switch(void *dummy)
-{
-	int cpu = smp_processor_id();
-	int si = per_cpu(switch_index, cpu);
-	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
-	nmi_cpu_stop(NULL);
-	nmi_cpu_save_mpx_registers(msrs);
-
-	/* move to next set */
-	si += model->num_counters;
-	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
-		per_cpu(switch_index, cpu) = 0;
-	else
-		per_cpu(switch_index, cpu) = si;
-
-	model->switch_ctrl(model, msrs);
-	nmi_cpu_restore_mpx_registers(msrs);
-
-	nmi_cpu_start(NULL);
-}
-
-
-/*
- * Quick check to see if multiplexing is necessary.
- * The check should be sufficient since counters are used
- * in ordre.
- */
-static int nmi_multiplex_on(void)
-{
-	return counter_config[model->num_counters].count ? 0 : -EINVAL;
-}
-
-static int nmi_switch_event(void)
-{
-	if (!model->switch_ctrl)
-		return -ENOSYS;		/* not implemented */
-	if (nmi_multiplex_on() < 0)
-		return -EINVAL;		/* not necessary */
-
-	on_each_cpu(nmi_cpu_switch, NULL, 1);
-
-	atomic_inc(&multiplex_counter);
-
-	return 0;
-}
-
-#endif
-
 #ifdef CONFIG_SMP
 static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 				 void *data)
-- 
cgit v1.2.3


From 259a83a8abdb9d2664819ec80ad12ebaeb251e32 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 15:12:35 +0200
Subject: x86/oprofile: Remove const qualifier from struct op_x86_model_spec

This patch removes the const qualifier from struct
op_x86_model_spec to make model parameters changable.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 4 ++--
 arch/x86/oprofile/op_model_amd.c  | 2 +-
 arch/x86/oprofile/op_model_p4.c   | 4 ++--
 arch/x86/oprofile/op_model_ppro.c | 2 +-
 arch/x86/oprofile/op_x86_model.h  | 8 ++++----
 5 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 998c7dca31e..826f391b422 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -27,7 +27,7 @@
 #include "op_counter.h"
 #include "op_x86_model.h"
 
-static struct op_x86_model_spec const *model;
+static struct op_x86_model_spec *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
@@ -542,7 +542,7 @@ module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0);
 static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
-	struct op_x86_model_spec const *spec = &op_ppro_spec;	/* default */
+	struct op_x86_model_spec *spec = &op_ppro_spec;	/* default */
 
 	if (force_arch_perfmon && cpu_has_arch_perfmon)
 		return 0;
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 644980f0392..39604b429d6 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -526,7 +526,7 @@ static void op_amd_exit(void) {}
 
 #endif /* CONFIG_OPROFILE_IBS */
 
-struct op_x86_model_spec const op_amd_spec = {
+struct op_x86_model_spec op_amd_spec = {
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
 	.num_virt_counters	= NUM_VIRT_COUNTERS,
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 65b9237cde8..40df028d0d9 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -695,7 +695,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 
 
 #ifdef CONFIG_SMP
-struct op_x86_model_spec const op_p4_ht2_spec = {
+struct op_x86_model_spec op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
 	.num_virt_counters	= NUM_COUNTERS_HT2,
@@ -709,7 +709,7 @@ struct op_x86_model_spec const op_p4_ht2_spec = {
 };
 #endif
 
-struct op_x86_model_spec const op_p4_spec = {
+struct op_x86_model_spec op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
 	.num_virt_counters	= NUM_COUNTERS_NON_HT,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 098cbca5c0b..659f3b6f86f 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -203,7 +203,7 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 }
 
 
-struct op_x86_model_spec const op_ppro_spec = {
+struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
 	.num_virt_counters	= 2,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index e874dc3565a..0c886fa0369 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -62,10 +62,10 @@ extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 			   struct op_counter_config *counter_config);
 extern int op_x86_phys_to_virt(int phys);
 
-extern struct op_x86_model_spec const op_ppro_spec;
-extern struct op_x86_model_spec const op_p4_spec;
-extern struct op_x86_model_spec const op_p4_ht2_spec;
-extern struct op_x86_model_spec const op_amd_spec;
+extern struct op_x86_model_spec op_ppro_spec;
+extern struct op_x86_model_spec op_p4_spec;
+extern struct op_x86_model_spec op_p4_ht2_spec;
+extern struct op_x86_model_spec op_amd_spec;
 extern struct op_x86_model_spec op_arch_perfmon_spec;
 
 #endif /* OP_X86_MODEL_H */
-- 
cgit v1.2.3


From 2904a527575344a804fdd82b1f8d09a8731d8d49 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 12:33:41 +0200
Subject: x86/oprofile: Remove unused num_virt_controls from struct
 op_x86_model_spec

The member num_virt_controls of struct op_x86_model_spec is not
used. This patch removes it.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 1 -
 arch/x86/oprofile/op_model_p4.c   | 2 --
 arch/x86/oprofile/op_model_ppro.c | 1 -
 arch/x86/oprofile/op_x86_model.h  | 1 -
 4 files changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 39604b429d6..dce69b5979e 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -530,7 +530,6 @@ struct op_x86_model_spec op_amd_spec = {
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
 	.num_virt_counters	= NUM_VIRT_COUNTERS,
-	.num_virt_controls	= NUM_VIRT_CONTROLS,
 	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
 	.event_mask		= OP_EVENT_MASK,
 	.init			= op_amd_init,
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 40df028d0d9..0a4f2deb9e8 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -699,7 +699,6 @@ struct op_x86_model_spec op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
 	.num_virt_counters	= NUM_COUNTERS_HT2,
-	.num_virt_controls	= NUM_CONTROLS_HT2,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
@@ -713,7 +712,6 @@ struct op_x86_model_spec op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
 	.num_virt_counters	= NUM_COUNTERS_NON_HT,
-	.num_virt_controls	= NUM_CONTROLS_NON_HT,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 659f3b6f86f..753a02ab215 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -207,7 +207,6 @@ struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
 	.num_virt_counters	= 2,
-	.num_virt_controls	= 2,
 	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 0c886fa0369..4e2e7c2c519 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -37,7 +37,6 @@ struct op_x86_model_spec {
 	unsigned int	num_counters;
 	unsigned int	num_controls;
 	unsigned int	num_virt_counters;
-	unsigned int	num_virt_controls;
 	u64		reserved;
 	u16		event_mask;
 	int		(*init)(struct oprofile_operations *ops);
-- 
cgit v1.2.3


From 52471c67ee2fa5ed6f700ef57bf27833c63b2192 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 6 Jul 2009 14:43:55 +0200
Subject: x86/oprofile: Modify initialization of num_virt_counters

Models that do not yet support counter multiplexing have to setup
num_virt_counters. This patch implements the setup from num_counters
if num_virt_counters is not set. Thus, num_virt_counters must be setup
only for multiplexing support.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 3 +++
 arch/x86/oprofile/op_model_p4.c   | 2 --
 arch/x86/oprofile/op_model_ppro.c | 1 -
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 826f391b422..82ee29517f1 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -674,6 +674,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	if (ret)
 		return ret;
 
+	if (!model->num_virt_counters)
+		model->num_virt_counters = model->num_counters;
+
 	init_sysfs();
 	using_nmi = 1;
 	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 0a4f2deb9e8..ac6b354becd 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -698,7 +698,6 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
-	.num_virt_counters	= NUM_COUNTERS_HT2,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
@@ -711,7 +710,6 @@ struct op_x86_model_spec op_p4_ht2_spec = {
 struct op_x86_model_spec op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
-	.num_virt_counters	= NUM_COUNTERS_NON_HT,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 753a02ab215..4899215999d 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -206,7 +206,6 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
-	.num_virt_counters	= 2,
 	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
-- 
cgit v1.2.3


From 39e97f40c3a5e71de0532368deaa683e09b74ba2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 15:11:45 +0200
Subject: x86/oprofile: Add function has_mux() to check multiplexing support

The check is used to prevent running multiplexing code for models not
supporting multiplexing. Before, the code was running but without
effect.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 82ee29517f1..dca7240aeb2 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -124,6 +124,11 @@ static void nmi_stop(void)
 
 static DEFINE_PER_CPU(int, switch_index);
 
+static inline int has_mux(void)
+{
+	return !!model->switch_ctrl;
+}
+
 inline int op_x86_phys_to_virt(int phys)
 {
 	return __get_cpu_var(switch_index) + phys;
@@ -132,6 +137,10 @@ inline int op_x86_phys_to_virt(int phys)
 static void nmi_shutdown_mux(void)
 {
 	int i;
+
+	if (!has_mux())
+		return;
+
 	for_each_possible_cpu(i) {
 		kfree(per_cpu(cpu_msrs, i).multiplex);
 		per_cpu(cpu_msrs, i).multiplex = NULL;
@@ -144,12 +153,17 @@ static int nmi_setup_mux(void)
 	size_t multiplex_size =
 		sizeof(struct op_msr) * model->num_virt_counters;
 	int i;
+
+	if (!has_mux())
+		return 1;
+
 	for_each_possible_cpu(i) {
 		per_cpu(cpu_msrs, i).multiplex =
 			kmalloc(multiplex_size, GFP_KERNEL);
 		if (!per_cpu(cpu_msrs, i).multiplex)
 			return 0;
 	}
+
 	return 1;
 }
 
@@ -158,6 +172,9 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 	int i;
 	struct op_msr *multiplex = msrs->multiplex;
 
+	if (!has_mux())
+		return;
+
 	for (i = 0; i < model->num_virt_counters; ++i) {
 		if (counter_config[i].enabled) {
 			multiplex[i].saved = -(u64)counter_config[i].count;
@@ -229,7 +246,7 @@ static int nmi_multiplex_on(void)
 
 static int nmi_switch_event(void)
 {
-	if (!model->switch_ctrl)
+	if (!has_mux())
 		return -ENOSYS;		/* not implemented */
 	if (nmi_multiplex_on() < 0)
 		return -EINVAL;		/* not necessary */
-- 
cgit v1.2.3


From 5280514471c2803776701c43c027038decac1103 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 16:02:44 +0200
Subject: x86/oprofile: Enable multiplexing only if the model supports it

This patch checks if the model supports multiplexing. Only then
multiplexing will be enabled. The code is added to the common x86
initialization.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index dca7240aeb2..f0fb44725d8 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -258,6 +258,12 @@ static int nmi_switch_event(void)
 	return 0;
 }
 
+static inline void mux_init(struct oprofile_operations *ops)
+{
+	if (has_mux())
+		ops->switch_events = nmi_switch_event;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -265,6 +271,7 @@ static inline void nmi_shutdown_mux(void) { }
 static inline int nmi_setup_mux(void) { return 1; }
 static inline void
 nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
+static inline void mux_init(struct oprofile_operations *ops) { }
 
 #endif
 
@@ -682,9 +689,6 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	ops->start		= nmi_start;
 	ops->stop		= nmi_stop;
 	ops->cpu_type		= cpu_type;
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	ops->switch_events	= nmi_switch_event;
-#endif
 
 	if (model->init)
 		ret = model->init(ops);
@@ -694,6 +698,8 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	if (!model->num_virt_counters)
 		model->num_virt_counters = model->num_counters;
 
+	mux_init(ops);
+
 	init_sysfs();
 	using_nmi = 1;
 	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
-- 
cgit v1.2.3


From 4d015f79e972cea1761cfee8872b1c0992ccd8b2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 21:42:51 +0200
Subject: x86/oprofile: Implement mux_clone()

To setup a counter for all cpus, its structure is cloned from cpu
0. This patch implements mux_clone() to do this part for multiplexing
data.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index f0fb44725d8..da6d2ab31c6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -264,6 +264,16 @@ static inline void mux_init(struct oprofile_operations *ops)
 		ops->switch_events = nmi_switch_event;
 }
 
+static void mux_clone(int cpu)
+{
+	if (!has_mux())
+		return;
+
+	memcpy(per_cpu(cpu_msrs, cpu).multiplex,
+	       per_cpu(cpu_msrs, 0).multiplex,
+	       sizeof(struct op_msr) * model->num_virt_counters);
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -272,6 +282,7 @@ static inline int nmi_setup_mux(void) { return 1; }
 static inline void
 nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
 static inline void mux_init(struct oprofile_operations *ops) { }
+static void mux_clone(int cpu) { }
 
 #endif
 
@@ -350,20 +361,18 @@ static int nmi_setup(void)
 	/* Assume saved/restored counters are the same on all CPUs */
 	model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
 	for_each_possible_cpu(cpu) {
-		if (cpu != 0) {
-			memcpy(per_cpu(cpu_msrs, cpu).counters,
-				per_cpu(cpu_msrs, 0).counters,
-				sizeof(struct op_msr) * model->num_counters);
-
-			memcpy(per_cpu(cpu_msrs, cpu).controls,
-				per_cpu(cpu_msrs, 0).controls,
-				sizeof(struct op_msr) * model->num_controls);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-			memcpy(per_cpu(cpu_msrs, cpu).multiplex,
-				per_cpu(cpu_msrs, 0).multiplex,
-				sizeof(struct op_msr) * model->num_virt_counters);
-#endif
-		}
+		if (!cpu)
+			continue;
+
+		memcpy(per_cpu(cpu_msrs, cpu).counters,
+		       per_cpu(cpu_msrs, 0).counters,
+		       sizeof(struct op_msr) * model->num_counters);
+
+		memcpy(per_cpu(cpu_msrs, cpu).controls,
+		       per_cpu(cpu_msrs, 0).controls,
+		       sizeof(struct op_msr) * model->num_controls);
+
+		mux_clone(cpu);
 	}
 	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
-- 
cgit v1.2.3


From 1b294f5960cd89e49eeb3e797860c552b03f2272 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:56:25 +0200
Subject: oprofile: Adding switch counter to oprofile statistic variables

This patch moves the multiplexing switch counter from x86 code to
common oprofile statistic variables. Now the value will be available
and usable for all architectures. The initialization and
incrementation also moved to common code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index da6d2ab31c6..7b3362f9abd 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -34,11 +34,6 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-extern atomic_t multiplex_counter;
-#endif
-
 struct op_counter_config counter_config[OP_MAX_COUNTER];
 
 /* common functions */
@@ -253,8 +248,6 @@ static int nmi_switch_event(void)
 
 	on_each_cpu(nmi_cpu_switch, NULL, 1);
 
-	atomic_inc(&multiplex_counter);
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 61d149d5248ad7428801cdede0f5fcc2b90cd61c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 10 Jul 2009 15:47:17 +0200
Subject: x86/oprofile: Implement op_x86_virt_to_phys()

This patch implements a common x86 function to convert virtual counter
numbers to physical.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c      | 6 ++++++
 arch/x86/oprofile/op_model_amd.c | 2 +-
 arch/x86/oprofile/op_x86_model.h | 1 +
 3 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 7b3362f9abd..5856e61cb09 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -129,6 +129,11 @@ inline int op_x86_phys_to_virt(int phys)
 	return __get_cpu_var(switch_index) + phys;
 }
 
+inline int op_x86_virt_to_phys(int virt)
+{
+	return virt % model->num_counters;
+}
+
 static void nmi_shutdown_mux(void)
 {
 	int i;
@@ -270,6 +275,7 @@ static void mux_clone(int cpu)
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
+inline int op_x86_virt_to_phys(int virt) { return virt; }
 static inline void nmi_shutdown_mux(void) { }
 static inline int nmi_setup_mux(void) { return 1; }
 static inline void
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index dce69b5979e..1ea19829d98 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -81,7 +81,7 @@ static void op_mux_fill_in_addresses(struct op_msrs * const msrs)
 	int i;
 
 	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
-		int hw_counter = i % NUM_COUNTERS;
+		int hw_counter = op_x86_virt_to_phys(i);
 		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
 			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
 		else
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 4e2e7c2c519..b83776180c7 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -60,6 +60,7 @@ struct op_counter_config;
 extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 			   struct op_counter_config *counter_config);
 extern int op_x86_phys_to_virt(int phys);
+extern int op_x86_virt_to_phys(int virt);
 
 extern struct op_x86_model_spec op_ppro_spec;
 extern struct op_x86_model_spec op_p4_spec;
-- 
cgit v1.2.3


From 11be1a7b54283021777f409aa983ce125945e67c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 10 Jul 2009 18:15:21 +0200
Subject: x86/oprofile: Add counter reservation check for virtual counters

This patch adds a check for the availability of a counter. A virtual
counter is used only if its physical counter is not reserved.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 5856e61cb09..cb88b1a0bd5 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -435,15 +435,13 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 		struct dentry *dir;
 		char buf[4];
 
-#ifndef CONFIG_OPROFILE_EVENT_MULTIPLEX
 		/* quick little hack to _not_ expose a counter if it is not
 		 * available for use.  This should protect userspace app.
 		 * NOTE:  assumes 1:1 mapping here (that counters are organized
 		 *        sequentially in their struct assignment).
 		 */
-		if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i)))
+		if (!avail_to_resrv_perfctr_nmi_bit(op_x86_virt_to_phys(i)))
 			continue;
-#endif /* CONFIG_OPROFILE_EVENT_MULTIPLEX */
 
 		snprintf(buf,  sizeof(buf), "%d", i);
 		dir = oprofilefs_mkdir(sb, root, buf);
-- 
cgit v1.2.3


From c550091edd6fac2ed9dac1b30d986b6c58b216fa Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 16 Jul 2009 13:11:16 +0200
Subject: x86/oprofile: Small coding style fixes

Some small coding style fixes.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 1ea19829d98..827beecb67a 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -144,11 +144,10 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* setup reset_value */
 	for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
-		if (counter_config[i].enabled) {
+		if (counter_config[i].enabled)
 			reset_value[i] = counter_config[i].count;
-		} else {
+		else
 			reset_value[i] = 0;
-		}
 	}
 
 	/* clear all counters */
-- 
cgit v1.2.3


From 0ecf24ef49d4f46ff5d6af357c3b9ec8d798160d Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 20 Jul 2009 16:05:37 +0100
Subject: blackfin: fix wrong CTS inversion

The Blackfin serial headers were inverting the CTS value leading to wrong
handling of the CTS line which broke CTS/RTS handling completely.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h | 2 +-
 arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index 0fb2ce5d840..dbade93395e 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a625659dd67..ebd6cebc1fb 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index a3789d7ccf8..4062e24e759 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b86662fb9de..e95d54f9af6 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index c536551eb4b..999f239fe1a 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index a1b50878553..fd5e8878b8c 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
-- 
cgit v1.2.3


From 77f32dfdd97857280ae1ebac64382ff082cd7ea0 Mon Sep 17 00:00:00 2001
From: Denis Turischev <denis@compulab.co.il>
Date: Mon, 20 Jul 2009 18:48:17 +0300
Subject: x86: Add reboot fixup for SBC-fitPC2

The CompuLab SBC-fitPC2 board needs to reboot via BIOS.

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/reboot.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8170f..508e982dd07 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -249,6 +249,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
 		},
 	},
+	{	/* Handle problems with rebooting on CompuLab SBC-FITPC2 */
+		.callback = set_bios_reboot,
+		.ident = "CompuLab SBC-FITPC2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
+		},
+	},
 	{ }
 };
 
-- 
cgit v1.2.3


From 155b73529583c38f30fd394d692b15a893960782 Mon Sep 17 00:00:00 2001
From: Uros Bizjak <ubizjak@gmail.com>
Date: Sun, 19 Jul 2009 18:06:35 +0200
Subject: x86: Fix movq immediate operand constraints in uaccess_64.h

arch/x86/include/asm/uaccess_64.h uses wrong asm operand constraint
("ir") for movq insn. Since movq sign-extends its immediate operand,
"er" constraint should be used instead.

Attached patch changes all uses of __put_user_asm in uaccess_64.h to use
"er" when "q" insn suffix is involved.

Patch was compile tested on x86_64 with defconfig.

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org
---
 arch/x86/include/asm/uaccess_64.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 8cc687326eb..db24b215fc5 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -88,11 +88,11 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
 			      ret, "l", "k", "ir", 4);
 		return ret;
 	case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			      ret, "q", "", "ir", 8);
+			      ret, "q", "", "er", 8);
 		return ret;
 	case 10:
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 10);
+			       ret, "q", "", "er", 10);
 		if (unlikely(ret))
 			return ret;
 		asm("":::"memory");
@@ -101,12 +101,12 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
 		return ret;
 	case 16:
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 16);
+			       ret, "q", "", "er", 16);
 		if (unlikely(ret))
 			return ret;
 		asm("":::"memory");
 		__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
-			       ret, "q", "", "ir", 8);
+			       ret, "q", "", "er", 8);
 		return ret;
 	default:
 		return copy_user_generic((__force void *)dst, src, size);
@@ -157,7 +157,7 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 			       ret, "q", "", "=r", 8);
 		if (likely(!ret))
 			__put_user_asm(tmp, (u64 __user *)dst,
-				       ret, "q", "", "ir", 8);
+				       ret, "q", "", "er", 8);
 		return ret;
 	}
 	default:
-- 
cgit v1.2.3


From ebe119cd0929df4878f758ebf880cb435e4dcaaf Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 20 Jul 2009 23:27:39 -0700
Subject: x86: Fix movq immediate operand constraints in uaccess.h

The movq instruction, generated by __put_user_asm() when used for
64-bit data, takes a sign-extended immediate ("e") not a zero-extended
immediate ("Z").

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: stable@kernel.org
---
 arch/x86/include/asm/uaccess.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 20e6a795e16..d2c6c930b49 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -212,9 +212,9 @@ extern int __get_user_bad(void);
 		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 #else
 #define __put_user_asm_u64(x, ptr, retval, errret) \
-	__put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
+	__put_user_asm(x, ptr, retval, "q", "", "er", errret)
 #define __put_user_asm_ex_u64(x, addr)	\
-	__put_user_asm_ex(x, addr, "q", "", "Zr")
+	__put_user_asm_ex(x, addr, "q", "", "er")
 #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
 #endif
 
-- 
cgit v1.2.3


From ef9b542fce00dafc6bb1d9097b045a777f4a2382 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 21 Jul 2009 17:24:36 +0900
Subject: sh: bzip2/lzma uImage support.

This builds on the bzip2/lzma zImage support change and wires it up for
uImages. Based on the blackfin implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile                 | 15 ++++++++++-----
 arch/sh/boot/.gitignore          |  5 ++---
 arch/sh/boot/Makefile            | 39 ++++++++++++++++++++++++++++-----------
 arch/sh/boot/compressed/Makefile |  4 ----
 4 files changed, 40 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 75d049b03f7..2aba73eccb3 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -189,14 +189,16 @@ KBUILD_AFLAGS		+= $(cflags-y)
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-PHONY += maketools FORCE
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+	       zImage vmlinux.srec
+PHONY += maketools $(BOOT_TARGETS) FORCE
 
 maketools:  include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
 
 all: $(KBUILD_IMAGE)
 
-zImage uImage uImage.srec vmlinux.srec: vmlinux
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 compressed: zImage
@@ -208,10 +210,13 @@ archclean:
 	$(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
 
 define archhelp
-	@echo '* zImage 	           - Compressed kernel image'
+	@echo '  zImage 	           - Compressed kernel image'
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
-	@echo '  uImage  	           - Create a bootable image for U-Boot'
-	@echo '  uImage.srec  	           - Create an S-record for U-Boot'
+	@echo '* uImage  	           - Alias to bootable U-Boot image'
+	@echo '  uImage.srec	           - Create an S-record for U-Boot'
+	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
+	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
+	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
 endef
 
 CLEAN_FILES += include/asm-sh/machtypes.h
diff --git a/arch/sh/boot/.gitignore b/arch/sh/boot/.gitignore
index aad5edddf93..541087d2029 100644
--- a/arch/sh/boot/.gitignore
+++ b/arch/sh/boot/.gitignore
@@ -1,4 +1,3 @@
 zImage
-vmlinux.srec
-uImage
-uImage.srec
+vmlinux*
+uImage*
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 78efb04c28f..dd2a852041e 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -20,7 +20,12 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
-targets := zImage vmlinux.srec uImage uImage.srec
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+
+targets := zImage vmlinux.srec uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 subdir- := compressed
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
@@ -40,9 +45,6 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_MEMORY_START)]')
 endif
 
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY
-
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(KERNEL_MEMORY) + \
@@ -55,19 +57,30 @@ KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+		   -C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
-$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
-
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
 OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
 $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
 	$(call if_changed,objcopy)
@@ -76,5 +89,9 @@ OBJCOPYFLAGS_uImage.srec := -I binary -O srec
 $(obj)/uImage.srec: $(obj)/uImage
 	$(call if_changed,objcopy)
 
-clean-files	+= uImage uImage.srec vmlinux.srec \
-		   vmlinux.bin vmlinux.bin.gz
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'
+
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 3324019e207..b31618e9e8c 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -48,10 +48,6 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
 
-suffix-$(CONFIG_KERNEL_GZIP)	:= gz
-suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
-suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
-
 OBJCOPYFLAGS += -R .empty_zero_page
 
 LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-- 
cgit v1.2.3


From 3aa7a9a3cf8774f6701b1903a6353f9545f561ce Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 20 Jul 2009 18:22:36 +0100
Subject: [ARM] 5612/1: ep93xx: add platform LEDs

The EP93xx has two gpio pins specifically assigned to drive
external LEDs.  Add core support for these LEDs.

On the EDB93xx development boards, the rdled is connected to
an external reset circuit.  Turning this led on for an extended
amount of time will cause the circuit to issue a manual reset.

Refer to Cirrus App Note AN258 for more information.

	http://www.cirrus.com/en/pubs/appNote/AN258REV2.pdf

This led can be safely used as the system heartbeat with the
ledtrig-heartbeat driver.

	echo heartbeat > /sys/class/leds/platform:rdled/trigger

The grled can be used for any desired purpose.

Tested-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b390c35f8bc..2b58df0184c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -22,6 +22,7 @@
 #include <linux/timex.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
@@ -568,6 +569,34 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+	{
+		.name			= "platform:grled",
+		.gpio			= EP93XX_GPIO_LINE_GRLED,
+	}, {
+		.name			= "platform:rdled",
+		.gpio			= EP93XX_GPIO_LINE_RDLED,
+	},
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
+	.leds		= ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_led_data,
+	},
+};
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
@@ -583,4 +612,5 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
+	platform_device_register(&ep93xx_leds);
 }
-- 
cgit v1.2.3


From 4bf1fa5a34aa2dd0d2cc58f0fc213a2e22d007a4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 21 Jul 2009 09:56:27 +0100
Subject: [ARM] 5613/1: implement CALLER_ADDRESSx
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

As __builtin_return_address(n) doesn't work for ARM with n > 0, the
kernel needs its own implementation.

This fixes many warnings saying:

	warning: unsupported argument to '__builtin_return_address'

The new methods and walk_stackframe must not be instrumented because
CALLER_ADDRESSx is used in the various tracers and tracing the tracer is
a bad idea.

What's currently missing is an implementation using unwind tables.  This
is not fatal though, it's just that the tracers don't get enough
information to be really useful.

Note that if both ARM_UNWIND and FRAME_POINTER are enabled,
walk_stackframe uses unwind information.  So in this case the same
implementation is used as when FRAME_POINTER is disabled.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/ftrace.h    | 34 +++++++++++++++++++
 arch/arm/kernel/Makefile         |  4 ++-
 arch/arm/kernel/return_address.c | 71 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/kernel/stacktrace.c     |  4 +--
 4 files changed, 110 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/kernel/return_address.c

(limited to 'arch')

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..d74265cffd8 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -11,4 +11,38 @@ extern void mcount(void);
 
 #endif
 
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work.  If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information.  For this to work in the function tracer many functions would
+ * have to be marked with __notrace.  So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
 #endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b3abc..3213c9382b1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
+CFLAGS_REMOVE_return_address.o = -pg
+
 # Object file lists.
 
 obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
-		   process.o ptrace.o setup.o signal.o \
+		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 00000000000..df246da4cec
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)frame->lr;
+
+		return 1;
+	} else {
+		--data->level;
+		return 0;
+	}
+}
+
+void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+	struct stackframe frame;
+	register unsigned long current_sp asm ("sp");
+
+	data.level = level + 1;
+
+	frame.fp = (unsigned long)__builtin_frame_address(0);
+	frame.sp = current_sp;
+	frame.lr = (unsigned long)__builtin_return_address(0);
+	frame.pc = (unsigned long)return_address;
+
+	walk_stackframe(&frame, save_return_addr, &data);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5cc16..20b7411e47f 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame)
 }
 #endif
 
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
 		     int (*fn)(struct stackframe *, void *), void *data)
 {
 	while (1) {
-- 
cgit v1.2.3


From e9084ec98bb9aa3abc6cf73181177780ce7546f8 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Thu, 16 Jul 2009 09:45:11 +0100
Subject: x86, mce: Fix set_trigger() accessor

Fix the condition checking the result of strchr() (which previously
could result in an oops), and make the function return the number of
bytes actively used.

[ Impact: fix oops ]

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <4A5F04B7020000780000AB59@vpn.id2.novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 484c1e5f658..1cfb623ce11 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1692,17 +1692,15 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
 				const char *buf, size_t siz)
 {
 	char *p;
-	int len;
 
 	strncpy(mce_helper, buf, sizeof(mce_helper));
 	mce_helper[sizeof(mce_helper)-1] = 0;
-	len = strlen(mce_helper);
 	p = strchr(mce_helper, '\n');
 
-	if (*p)
+	if (p)
 		*p = 0;
 
-	return len;
+	return strlen(mce_helper) + !!p;
 }
 
 static ssize_t set_ignore_ce(struct sys_device *s,
-- 
cgit v1.2.3


From 3162534069597e34dd0ac9eb711be8dc23835ae7 Mon Sep 17 00:00:00 2001
From: Joseph Cihula <joseph.cihula@intel.com>
Date: Tue, 30 Jun 2009 19:30:59 -0700
Subject: x86, intel_txt: Intel TXT boot support

This patch adds kernel configuration and boot support for Intel Trusted
Execution Technology (Intel TXT).

Intel's technology for safer computing, Intel Trusted Execution
Technology (Intel TXT), defines platform-level enhancements that
provide the building blocks for creating trusted platforms.

Intel TXT was formerly known by the code name LaGrande Technology (LT).

Intel TXT in Brief:
o  Provides dynamic root of trust for measurement (DRTM)
o  Data protection in case of improper shutdown
o  Measurement and verification of launched environment

Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems.  It is currently available on desktop systems based on
the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP
dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45
Express chipsets.

For more information, see http://www.intel.com/technology/security/.
This site also has a link to the Intel TXT MLE Developers Manual, which
has been updated for the new released platforms.

A much more complete description of how these patches support TXT, how to
configure a system for it, etc. is in the Documentation/intel_txt.txt file
in this patch.

This patch provides the TXT support routines for complete functionality,
documentation for TXT support and for the changes to the boot_params structure,
and boot detection of a TXT launch.  Attempts to shutdown (reboot, Sx) the system
will result in platform resets; subsequent patches will support these shutdown modes
properly.

 Documentation/intel_txt.txt      |  210 +++++++++++++++++++++
 Documentation/x86/zero-page.txt  |    1
 arch/x86/include/asm/bootparam.h |    3
 arch/x86/include/asm/fixmap.h    |    3
 arch/x86/include/asm/tboot.h     |  197 ++++++++++++++++++++
 arch/x86/kernel/Makefile         |    1
 arch/x86/kernel/setup.c          |    4
 arch/x86/kernel/tboot.c          |  379 +++++++++++++++++++++++++++++++++++++++
 security/Kconfig                 |   30 +++
 9 files changed, 827 insertions(+), 1 deletion(-)

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Gang Wei <gang.wei@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/bootparam.h |   3 +-
 arch/x86/include/asm/fixmap.h    |   3 +
 arch/x86/include/asm/tboot.h     | 197 ++++++++++++++++++++
 arch/x86/kernel/Makefile         |   1 +
 arch/x86/kernel/setup.c          |   4 +
 arch/x86/kernel/tboot.c          | 379 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 586 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/include/asm/tboot.h
 create mode 100644 arch/x86/kernel/tboot.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 1724e8de317..6ca20218dd7 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -85,7 +85,8 @@ struct efi_info {
 struct boot_params {
 	struct screen_info screen_info;			/* 0x000 */
 	struct apm_bios_info apm_bios_info;		/* 0x040 */
-	__u8  _pad2[12];				/* 0x054 */
+	__u8  _pad2[4];					/* 0x054 */
+	__u64  tboot_addr;				/* 0x058 */
 	struct ist_info ist_info;			/* 0x060 */
 	__u8  _pad3[16];				/* 0x070 */
 	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 7b2d71df39a..14f9890eb49 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -131,6 +131,9 @@ enum fixed_addresses {
 #endif
 #ifdef CONFIG_X86_32
 	FIX_WP_TEST,
+#endif
+#ifdef CONFIG_INTEL_TXT
+	FIX_TBOOT_BASE,
 #endif
 	__end_of_fixed_addresses
 };
diff --git a/arch/x86/include/asm/tboot.h b/arch/x86/include/asm/tboot.h
new file mode 100644
index 00000000000..b13929d4e5f
--- /dev/null
+++ b/arch/x86/include/asm/tboot.h
@@ -0,0 +1,197 @@
+/*
+ * tboot.h: shared data structure with tboot and kernel and functions
+ *          used by kernel for runtime support of Intel(R) Trusted
+ *          Execution Technology
+ *
+ * Copyright (c) 2006-2009, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _ASM_TBOOT_H
+#define _ASM_TBOOT_H
+
+#include <acpi/acpi.h>
+
+/* these must have the values from 0-5 in this order */
+enum {
+	TB_SHUTDOWN_REBOOT = 0,
+	TB_SHUTDOWN_S5,
+	TB_SHUTDOWN_S4,
+	TB_SHUTDOWN_S3,
+	TB_SHUTDOWN_HALT,
+	TB_SHUTDOWN_WFS
+};
+
+#ifdef CONFIG_INTEL_TXT
+
+/* used to communicate between tboot and the launched kernel */
+
+#define TB_KEY_SIZE             64   /* 512 bits */
+
+#define MAX_TB_MAC_REGIONS      32
+
+struct tboot_mac_region {
+	u64  start;         /* must be 64 byte -aligned */
+	u32  size;          /* must be 64 byte -granular */
+} __packed;
+
+/* GAS - Generic Address Structure (ACPI 2.0+) */
+struct tboot_acpi_generic_address {
+	u8  space_id;
+	u8  bit_width;
+	u8  bit_offset;
+	u8  access_width;
+	u64 address;
+} __packed;
+
+/*
+ * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec
+ * (http://www.acpi.info/)
+ */
+struct tboot_acpi_sleep_info {
+	struct tboot_acpi_generic_address pm1a_cnt_blk;
+	struct tboot_acpi_generic_address pm1b_cnt_blk;
+	struct tboot_acpi_generic_address pm1a_evt_blk;
+	struct tboot_acpi_generic_address pm1b_evt_blk;
+	u16 pm1a_cnt_val;
+	u16 pm1b_cnt_val;
+	u64 wakeup_vector;
+	u32 vector_width;
+	u64 kernel_s3_resume_vector;
+} __packed;
+
+/*
+ * shared memory page used for communication between tboot and kernel
+ */
+struct tboot {
+	/*
+	 * version 3+ fields:
+	 */
+
+	/* TBOOT_UUID */
+	u8 uuid[16];
+
+	/* version number: 5 is current */
+	u32 version;
+
+	/* physical addr of tb_log_t log */
+	u32 log_addr;
+
+	/*
+	 * physical addr of entry point for tboot shutdown and
+	 * type of shutdown (TB_SHUTDOWN_*) being requested
+	 */
+	u32 shutdown_entry;
+	u32 shutdown_type;
+
+	/* kernel-specified ACPI info for Sx shutdown */
+	struct tboot_acpi_sleep_info acpi_sinfo;
+
+	/* tboot location in memory (physical) */
+	u32 tboot_base;
+	u32 tboot_size;
+
+	/* memory regions (phys addrs) for tboot to MAC on S3 */
+	u8 num_mac_regions;
+	struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS];
+
+
+	/*
+	 * version 4+ fields:
+	 */
+
+	/* symmetric key for use by kernel; will be encrypted on S3 */
+	u8 s3_key[TB_KEY_SIZE];
+
+
+	/*
+	 * version 5+ fields:
+	 */
+
+	/* used to 4byte-align num_in_wfs */
+	u8 reserved_align[3];
+
+	/* number of processors in wait-for-SIPI */
+	u32 num_in_wfs;
+} __packed;
+
+/*
+ * UUID for tboot data struct to facilitate matching
+ * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is
+ * represented as {} in the char array used here
+ */
+#define TBOOT_UUID	{0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\
+			 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8}
+
+extern struct tboot *tboot;
+
+static inline int tboot_enabled(void)
+{
+	return tboot != NULL;
+}
+
+extern void tboot_probe(void);
+extern void tboot_create_trampoline(void);
+extern void tboot_shutdown(u32 shutdown_type);
+extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control);
+extern int tboot_wait_for_aps(int num_aps);
+extern struct acpi_table_header *tboot_get_dmar_table(
+				      struct acpi_table_header *dmar_tbl);
+extern int tboot_force_iommu(void);
+
+#else     /* CONFIG_INTEL_TXT */
+
+static inline int tboot_enabled(void)
+{
+	return 0;
+}
+
+static inline void tboot_probe(void)
+{
+}
+
+static inline void tboot_create_trampoline(void)
+{
+}
+
+static inline void tboot_shutdown(u32 shutdown_type)
+{
+}
+
+static inline void tboot_sleep(u8 sleep_state, u32 pm1a_control,
+			       u32 pm1b_control)
+{
+}
+
+static inline int tboot_wait_for_aps(int num_aps)
+{
+	return 0;
+}
+
+static inline struct acpi_table_header *tboot_get_dmar_table(
+					struct acpi_table_header *dmar_tbl)
+{
+	return dmar_tbl;
+}
+
+static inline int tboot_force_iommu(void)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_INTEL_TXT */
+
+#endif /* _ASM_TBOOT_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 430d5b24af7..832cb838cb4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_X86_DS_SELFTEST)		+= ds_selftest.o
 obj-$(CONFIG_X86_32)		+= tls.o
 obj-$(CONFIG_IA32_EMULATION)	+= tls.o
 obj-y				+= step.o
+obj-$(CONFIG_INTEL_TXT)		+= tboot.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-y				+= cpu/
 obj-y				+= acpi/
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index de2cab13284..80d6e9e3248 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -145,6 +145,8 @@ struct boot_params __initdata boot_params;
 struct boot_params boot_params;
 #endif
 
+#include <asm/tboot.h>
+
 /*
  * Machine setup..
  */
@@ -964,6 +966,8 @@ void __init setup_arch(char **cmdline_p)
 	paravirt_pagetable_setup_done(swapper_pg_dir);
 	paravirt_post_allocator_init();
 
+	tboot_probe();
+
 #ifdef CONFIG_X86_64
 	map_vsyscall();
 #endif
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
new file mode 100644
index 00000000000..263591afd29
--- /dev/null
+++ b/arch/x86/kernel/tboot.c
@@ -0,0 +1,379 @@
+/*
+ * tboot.c: main implementation of helper functions used by kernel for
+ *          runtime support of Intel(R) Trusted Execution Technology
+ *
+ * Copyright (c) 2006-2009, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/dma_remapping.h>
+#include <linux/init_task.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+
+#include <asm/trampoline.h>
+#include <asm/processor.h>
+#include <asm/bootparam.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/setup.h>
+#include <asm/tboot.h>
+#include <asm/e820.h>
+#include <asm/io.h>
+
+#include "acpi/realmode/wakeup.h"
+
+/* Global pointer to shared data; NULL means no measured launch. */
+struct tboot *tboot __read_mostly;
+
+/* timeout for APs (in secs) to enter wait-for-SIPI state during shutdown */
+#define AP_WAIT_TIMEOUT		1
+
+#undef pr_fmt
+#define pr_fmt(fmt)	"tboot: " fmt
+
+static u8 tboot_uuid[16] __initdata = TBOOT_UUID;
+
+void __init tboot_probe(void)
+{
+	/* Look for valid page-aligned address for shared page. */
+	if (!boot_params.tboot_addr)
+		return;
+	/*
+	 * also verify that it is mapped as we expect it before calling
+	 * set_fixmap(), to reduce chance of garbage value causing crash
+	 */
+	if (!e820_any_mapped(boot_params.tboot_addr,
+			     boot_params.tboot_addr, E820_RESERVED)) {
+		pr_warning("non-0 tboot_addr but it is not of type E820_RESERVED\n");
+		return;
+	}
+
+	/* only a natively booted kernel should be using TXT */
+	if (paravirt_enabled()) {
+		pr_warning("non-0 tboot_addr but pv_ops is enabled\n");
+		return;
+	}
+
+	/* Map and check for tboot UUID. */
+	set_fixmap(FIX_TBOOT_BASE, boot_params.tboot_addr);
+	tboot = (struct tboot *)fix_to_virt(FIX_TBOOT_BASE);
+	if (memcmp(&tboot_uuid, &tboot->uuid, sizeof(tboot->uuid))) {
+		pr_warning("tboot at 0x%llx is invalid\n",
+			   boot_params.tboot_addr);
+		tboot = NULL;
+		return;
+	}
+	if (tboot->version < 5) {
+		pr_warning("tboot version is invalid: %u\n", tboot->version);
+		tboot = NULL;
+		return;
+	}
+
+	pr_info("found shared page at phys addr 0x%llx:\n",
+		boot_params.tboot_addr);
+	pr_debug("version: %d\n", tboot->version);
+	pr_debug("log_addr: 0x%08x\n", tboot->log_addr);
+	pr_debug("shutdown_entry: 0x%x\n", tboot->shutdown_entry);
+	pr_debug("tboot_base: 0x%08x\n", tboot->tboot_base);
+	pr_debug("tboot_size: 0x%x\n", tboot->tboot_size);
+}
+
+static pgd_t *tboot_pg_dir;
+static struct mm_struct tboot_mm = {
+	.mm_rb          = RB_ROOT,
+	.pgd            = swapper_pg_dir,
+	.mm_users       = ATOMIC_INIT(2),
+	.mm_count       = ATOMIC_INIT(1),
+	.mmap_sem       = __RWSEM_INITIALIZER(init_mm.mmap_sem),
+	.page_table_lock =  __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock),
+	.mmlist         = LIST_HEAD_INIT(init_mm.mmlist),
+	.cpu_vm_mask    = CPU_MASK_ALL,
+};
+
+static inline void switch_to_tboot_pt(void)
+{
+	write_cr3(virt_to_phys(tboot_pg_dir));
+}
+
+static int map_tboot_page(unsigned long vaddr, unsigned long pfn,
+			  pgprot_t prot)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	pgd = pgd_offset(&tboot_mm, vaddr);
+	pud = pud_alloc(&tboot_mm, pgd, vaddr);
+	if (!pud)
+		return -1;
+	pmd = pmd_alloc(&tboot_mm, pud, vaddr);
+	if (!pmd)
+		return -1;
+	pte = pte_alloc_map(&tboot_mm, pmd, vaddr);
+	if (!pte)
+		return -1;
+	set_pte_at(&tboot_mm, vaddr, pte, pfn_pte(pfn, prot));
+	pte_unmap(pte);
+	return 0;
+}
+
+static int map_tboot_pages(unsigned long vaddr, unsigned long start_pfn,
+			   unsigned long nr)
+{
+	/* Reuse the original kernel mapping */
+	tboot_pg_dir = pgd_alloc(&tboot_mm);
+	if (!tboot_pg_dir)
+		return -1;
+
+	for (; nr > 0; nr--, vaddr += PAGE_SIZE, start_pfn++) {
+		if (map_tboot_page(vaddr, start_pfn, PAGE_KERNEL_EXEC))
+			return -1;
+	}
+
+	return 0;
+}
+
+void tboot_create_trampoline(void)
+{
+	u32 map_base, map_size;
+
+	if (!tboot_enabled())
+		return;
+
+	/* Create identity map for tboot shutdown code. */
+	map_base = PFN_DOWN(tboot->tboot_base);
+	map_size = PFN_UP(tboot->tboot_size);
+	if (map_tboot_pages(map_base << PAGE_SHIFT, map_base, map_size))
+		panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n", map_base, map_size);
+}
+
+static void set_mac_regions(void)
+{
+	tboot->num_mac_regions = 3;
+	/* S3 resume code */
+	tboot->mac_regions[0].start = PFN_PHYS(PFN_DOWN(acpi_wakeup_address));
+	tboot->mac_regions[0].size = PFN_UP(WAKEUP_SIZE) << PAGE_SHIFT;
+	/* AP trampoline code */
+	tboot->mac_regions[1].start =
+			PFN_PHYS(PFN_DOWN(virt_to_phys(trampoline_base)));
+	tboot->mac_regions[1].size = PFN_UP(TRAMPOLINE_SIZE) << PAGE_SHIFT;
+	/* kernel code + data + bss */
+	tboot->mac_regions[2].start = PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
+	tboot->mac_regions[2].size = PFN_PHYS(PFN_UP(virt_to_phys(&_end))) -
+				     PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
+}
+
+void tboot_shutdown(u32 shutdown_type)
+{
+	void (*shutdown)(void);
+
+	if (!tboot_enabled())
+		return;
+
+	/*
+	 * if we're being called before the 1:1 mapping is set up then just
+	 * return and let the normal shutdown happen; this should only be
+	 * due to very early panic()
+	 */
+	if (!tboot_pg_dir)
+		return;
+
+	/* if this is S3 then set regions to MAC */
+	if (shutdown_type == TB_SHUTDOWN_S3)
+		set_mac_regions();
+
+	tboot->shutdown_type = shutdown_type;
+
+	switch_to_tboot_pt();
+
+	shutdown = (void(*)(void))(unsigned long)tboot->shutdown_entry;
+	shutdown();
+
+	/* should not reach here */
+	while (1)
+		halt();
+}
+
+static void tboot_copy_fadt(const struct acpi_table_fadt *fadt)
+{
+#define TB_COPY_GAS(tbg, g)			\
+	tbg.space_id     = g.space_id;		\
+	tbg.bit_width    = g.bit_width;		\
+	tbg.bit_offset   = g.bit_offset;	\
+	tbg.access_width = g.access_width;	\
+	tbg.address      = g.address;
+
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1a_cnt_blk, fadt->xpm1a_control_block);
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1b_cnt_blk, fadt->xpm1b_control_block);
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1a_evt_blk, fadt->xpm1a_event_block);
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1b_evt_blk, fadt->xpm1b_event_block);
+
+	/*
+	 * We need phys addr of waking vector, but can't use virt_to_phys() on
+	 * &acpi_gbl_FACS because it is ioremap'ed, so calc from FACS phys
+	 * addr.
+	 */
+	tboot->acpi_sinfo.wakeup_vector = fadt->facs +
+		offsetof(struct acpi_table_facs, firmware_waking_vector);
+}
+
+void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
+{
+	static u32 acpi_shutdown_map[ACPI_S_STATE_COUNT] = {
+		/* S0,1,2: */ -1, -1, -1,
+		/* S3: */ TB_SHUTDOWN_S3,
+		/* S4: */ TB_SHUTDOWN_S4,
+		/* S5: */ TB_SHUTDOWN_S5 };
+
+	if (!tboot_enabled())
+		return;
+
+	tboot_copy_fadt(&acpi_gbl_FADT);
+	tboot->acpi_sinfo.pm1a_cnt_val = pm1a_control;
+	tboot->acpi_sinfo.pm1b_cnt_val = pm1b_control;
+	/* we always use the 32b wakeup vector */
+	tboot->acpi_sinfo.vector_width = 32;
+	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
+
+	if (sleep_state >= ACPI_S_STATE_COUNT ||
+	    acpi_shutdown_map[sleep_state] == -1) {
+		pr_warning("unsupported sleep state 0x%x\n", sleep_state);
+		return;
+	}
+
+	tboot_shutdown(acpi_shutdown_map[sleep_state]);
+}
+
+int tboot_wait_for_aps(int num_aps)
+{
+	unsigned long timeout;
+
+	if (!tboot_enabled())
+		return 0;
+
+	timeout = jiffies + AP_WAIT_TIMEOUT*HZ;
+	while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps &&
+	       time_before(jiffies, timeout))
+		cpu_relax();
+
+	return time_before(jiffies, timeout) ? 0 : 1;
+}
+
+/*
+ * TXT configuration registers (offsets from TXT_{PUB, PRIV}_CONFIG_REGS_BASE)
+ */
+
+#define TXT_PUB_CONFIG_REGS_BASE       0xfed30000
+#define TXT_PRIV_CONFIG_REGS_BASE      0xfed20000
+
+/* # pages for each config regs space - used by fixmap */
+#define NR_TXT_CONFIG_PAGES     ((TXT_PUB_CONFIG_REGS_BASE -                \
+				  TXT_PRIV_CONFIG_REGS_BASE) >> PAGE_SHIFT)
+
+/* offsets from pub/priv config space */
+#define TXTCR_HEAP_BASE             0x0300
+#define TXTCR_HEAP_SIZE             0x0308
+
+#define SHA1_SIZE      20
+
+struct sha1_hash {
+	u8 hash[SHA1_SIZE];
+};
+
+struct sinit_mle_data {
+	u32               version;             /* currently 6 */
+	struct sha1_hash  bios_acm_id;
+	u32               edx_senter_flags;
+	u64               mseg_valid;
+	struct sha1_hash  sinit_hash;
+	struct sha1_hash  mle_hash;
+	struct sha1_hash  stm_hash;
+	struct sha1_hash  lcp_policy_hash;
+	u32               lcp_policy_control;
+	u32               rlp_wakeup_addr;
+	u32               reserved;
+	u32               num_mdrs;
+	u32               mdrs_off;
+	u32               num_vtd_dmars;
+	u32               vtd_dmars_off;
+} __packed;
+
+struct acpi_table_header *tboot_get_dmar_table(struct acpi_table_header *dmar_tbl)
+{
+	void *heap_base, *heap_ptr, *config;
+
+	if (!tboot_enabled())
+		return dmar_tbl;
+
+	/*
+	 * ACPI tables may not be DMA protected by tboot, so use DMAR copy
+	 * SINIT saved in SinitMleData in TXT heap (which is DMA protected)
+	 */
+
+	/* map config space in order to get heap addr */
+	config = ioremap(TXT_PUB_CONFIG_REGS_BASE, NR_TXT_CONFIG_PAGES *
+			 PAGE_SIZE);
+	if (!config)
+		return NULL;
+
+	/* now map TXT heap */
+	heap_base = ioremap(*(u64 *)(config + TXTCR_HEAP_BASE),
+			    *(u64 *)(config + TXTCR_HEAP_SIZE));
+	iounmap(config);
+	if (!heap_base)
+		return NULL;
+
+	/* walk heap to SinitMleData */
+	/* skip BiosData */
+	heap_ptr = heap_base + *(u64 *)heap_base;
+	/* skip OsMleData */
+	heap_ptr += *(u64 *)heap_ptr;
+	/* skip OsSinitData */
+	heap_ptr += *(u64 *)heap_ptr;
+	/* now points to SinitMleDataSize; set to SinitMleData */
+	heap_ptr += sizeof(u64);
+	/* get addr of DMAR table */
+	dmar_tbl = (struct acpi_table_header *)(heap_ptr +
+		   ((struct sinit_mle_data *)heap_ptr)->vtd_dmars_off -
+		   sizeof(u64));
+
+	/* don't unmap heap because dmar.c needs access to this */
+
+	return dmar_tbl;
+}
+
+int tboot_force_iommu(void)
+{
+	if (!tboot_enabled())
+		return 0;
+
+	if (no_iommu || swiotlb || dmar_disabled)
+		pr_warning("Forcing Intel-IOMMU to enabled\n");
+
+	dmar_disabled = 0;
+#ifdef CONFIG_SWIOTLB
+	swiotlb = 0;
+#endif
+	no_iommu = 0;
+
+	return 1;
+}
-- 
cgit v1.2.3


From 840c2baf2d4cdf35ecc3b7fcbba7740f97de30a4 Mon Sep 17 00:00:00 2001
From: Joseph Cihula <joseph.cihula@intel.com>
Date: Tue, 30 Jun 2009 19:31:02 -0700
Subject: x86, intel_txt: Intel TXT reboot/halt shutdown support

Support for graceful handling of kernel reboots after an Intel(R) TXT launch.

Without this patch, attempting to reboot or halt the system will cause the
TXT hardware to lock memory upon system restart because the secrets-in-memory
flag that was set on launch was never cleared.  This will in turn cause BIOS
to execute a TXT Authenticated Code Module (ACM) that will scrub all of memory
and then unlock it.  Depending on the amount of memory in the system and its type,
this may take some time.

This patch creates a 1:1 address mapping to the tboot module and then calls back
into tboot so that it may properly and securely clean up system state and clear
the secrets-in-memory flag.  When it has completed these steps, the tboot module
will reboot or halt the system.

 arch/x86/kernel/reboot.c |    8 ++++++++
 init/main.c              |    3 +++
 2 files changed, 11 insertions(+)

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/reboot.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8170f..9de01c5d979 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -24,6 +24,8 @@
 # include <asm/iommu.h>
 #endif
 
+#include <asm/tboot.h>
+
 /*
  * Power off function, if any
  */
@@ -460,6 +462,8 @@ static void native_machine_emergency_restart(void)
 	if (reboot_emergency)
 		emergency_vmx_disable_all();
 
+	tboot_shutdown(TB_SHUTDOWN_REBOOT);
+
 	/* Tell the BIOS if we want cold or warm reboot */
 	*((unsigned short *)__va(0x472)) = reboot_mode;
 
@@ -586,6 +590,8 @@ static void native_machine_halt(void)
 	/* stop other cpus and apics */
 	machine_shutdown();
 
+	tboot_shutdown(TB_SHUTDOWN_HALT);
+
 	/* stop this cpu */
 	stop_this_cpu(NULL);
 }
@@ -597,6 +603,8 @@ static void native_machine_power_off(void)
 			machine_shutdown();
 		pm_power_off();
 	}
+	/* a fallback in case there is no PM info available */
+	tboot_shutdown(TB_SHUTDOWN_HALT);
 }
 
 struct machine_ops machine_ops = {
-- 
cgit v1.2.3


From 86886e55b273f565935491816c7c96b82469d4f8 Mon Sep 17 00:00:00 2001
From: Joseph Cihula <joseph.cihula@intel.com>
Date: Tue, 30 Jun 2009 19:31:07 -0700
Subject: x86, intel_txt: Intel TXT Sx shutdown support

Support for graceful handling of sleep states (S3/S4/S5) after an Intel(R) TXT launch.

Without this patch, attempting to place the system in one of the ACPI sleep
states (S3/S4/S5) will cause the TXT hardware to treat this as an attack and
will cause a system reset, with memory locked.  Not only may the subsequent
memory scrub take some time, but the platform will be unable to enter the
requested power state.

This patch calls back into the tboot so that it may properly and securely clean
up system state and clear the secrets-in-memory flag, after which it will place
the system into the requested sleep state using ACPI information passed by the kernel.

 arch/x86/kernel/smpboot.c     |    2 ++
 drivers/acpi/acpica/hwsleep.c |    3 +++
 kernel/cpu.c                  |    7 ++++++-
 3 files changed, 11 insertions(+), 1 deletion(-)

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/smpboot.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda69ee6..61cc40887c4 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -62,6 +62,7 @@
 #include <asm/vmi.h>
 #include <asm/apic.h>
 #include <asm/setup.h>
+#include <asm/tboot.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
@@ -1317,6 +1318,7 @@ void play_dead_common(void)
 void native_play_dead(void)
 {
 	play_dead_common();
+	tboot_shutdown(TB_SHUTDOWN_WFS);
 	wbinvd_halt();
 }
 
-- 
cgit v1.2.3


From 429b2b319af3987e808c18f6b81313104caf782c Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Sat, 18 Jul 2009 08:56:57 +0200
Subject: x86-64: Fix bad_srat() to clear all state

Need to clear both nodes and nodes_add state for start/end.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20090718065657.GA2898@basil.fritz.box>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: stable@kernel.org
---
 arch/x86/mm/srat_64.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 2dfcbf9df2a..dbb5381f7b3 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,8 +79,10 @@ static __init void bad_srat(void)
 	acpi_numa = -1;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		apicid_to_node[i] = NUMA_NO_NODE;
-	for (i = 0; i < MAX_NUMNODES; i++)
-		nodes_add[i].start = nodes[i].end = 0;
+	for (i = 0; i < MAX_NUMNODES; i++) {
+		nodes[i].start = nodes[i].end = 0;
+		nodes_add[i].start = nodes_add[i].end = 0;
+	}
 	remove_all_active_ranges();
 }
 
-- 
cgit v1.2.3


From d7aacaddcac3971e33cf52d7e610c06696cb347f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 8 Jul 2009 13:21:31 +0200
Subject: Driver Core: Add platform device arch data V3

Allow architecture specific data in struct platform_device V3.

With this patch struct pdev_archdata is added to struct
platform_device, similar to struct dev_archdata in found in
struct device. Useful for architecture code that needs to
keep extra data associated with each platform device.

Struct pdev_archdata is different from dev.platform_data, the
convention is that dev.platform_data points to driver-specific
data. It may or may not be required by the driver. The format
of this depends on driver but is the same across architectures.

The structure pdev_archdata is a place for architecture specific
data. This data is handled by architecture specific code (for
example runtime PM), and since it is architecture specific it
should _never_ be touched by device driver code. Exactly like
struct dev_archdata but for platform devices.

[rjw: This change is for power management mostly and that's why it
 goes through the suspend tree.]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 arch/arm/include/asm/device.h        | 3 +++
 arch/ia64/include/asm/device.h       | 3 +++
 arch/microblaze/include/asm/device.h | 3 +++
 arch/powerpc/include/asm/device.h    | 3 +++
 arch/sparc/include/asm/device.h      | 3 +++
 arch/x86/include/asm/device.h        | 3 +++
 6 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index c61642b4060..9f390ce335c 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -12,4 +12,7 @@ struct dev_archdata {
 #endif
 };
 
+struct pdev_archdata {
+};
+
 #endif
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index 41ab85d66f3..d66d446b127 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -15,4 +15,7 @@ struct dev_archdata {
 #endif
 };
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_IA64_DEVICE_H */
diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h
index c042830793e..30286db27c1 100644
--- a/arch/microblaze/include/asm/device.h
+++ b/arch/microblaze/include/asm/device.h
@@ -16,6 +16,9 @@ struct dev_archdata {
 	struct device_node	*of_node;
 };
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_MICROBLAZE_DEVICE_H */
 
 
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 7d2277cef09..e3e06e0f7fc 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -30,4 +30,7 @@ dev_archdata_get_node(const struct dev_archdata *ad)
 	return ad->of_node;
 }
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
index 3702e087df2..f3b85b6b0b7 100644
--- a/arch/sparc/include/asm/device.h
+++ b/arch/sparc/include/asm/device.h
@@ -32,4 +32,7 @@ dev_archdata_get_node(const struct dev_archdata *ad)
 	return ad->prom_node;
 }
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_SPARC_DEVICE_H */
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 4994a20acbc..cee34e9ca45 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -13,4 +13,7 @@ struct dma_map_ops *dma_ops;
 #endif
 };
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_X86_DEVICE_H */
-- 
cgit v1.2.3


From 79ee031ff6fd23a1a2a4f783cfc3421885304ce3 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 8 Jul 2009 13:22:04 +0200
Subject: ARM: Rework omap suspend_late()/resume_early()

This patch reworks platform driver power management code
for omap drivers using late/early legacy callbacks.

The callbacks are converted for CONFIG_SUSPEND like this:
  suspend_late() -> suspend_noirq()
  resume_early() -> resume_noirq()

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 arch/arm/plat-omap/debug-leds.c | 11 +++++++----
 arch/arm/plat-omap/gpio.c       | 14 ++++++++++----
 2 files changed, 17 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index be4eefda476..9395898dd49 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -281,24 +281,27 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int fpga_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+static int fpga_suspend_noirq(struct device *dev)
 {
 	__raw_writew(~0, &fpga->leds);
 	return 0;
 }
 
-static int fpga_resume_early(struct platform_device *pdev)
+static int fpga_resume_noirq(struct device *dev)
 {
 	__raw_writew(~hw_led_state, &fpga->leds);
 	return 0;
 }
 
+static struct dev_pm_ops fpga_dev_pm_ops = {
+	.suspend_noirq = fpga_suspend_noirq,
+	.resume_noirq = fpga_resume_noirq,
+};
 
 static struct platform_driver led_driver = {
 	.driver.name	= "omap_dbg_led",
+	.driver.pm	= &fpga_dev_pm_ops,
 	.probe		= fpga_probe,
-	.suspend_late	= fpga_suspend_late,
-	.resume_early	= fpga_resume_early,
 };
 
 static int __init fpga_init(void)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..3d03337ad42 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1264,8 +1264,9 @@ static struct irq_chip mpuio_irq_chip = {
 
 #include <linux/platform_device.h>
 
-static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+static int omap_mpuio_suspend_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
 	unsigned long		flags;
@@ -1278,8 +1279,9 @@ static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t me
 	return 0;
 }
 
-static int omap_mpuio_resume_early(struct platform_device *pdev)
+static int omap_mpuio_resume_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
 	unsigned long		flags;
@@ -1291,14 +1293,18 @@ static int omap_mpuio_resume_early(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+	.suspend_noirq = omap_mpuio_suspend_noirq,
+	.resume_noirq = omap_mpuio_resume_noirq,
+};
+
 /* use platform_driver for this, now that there's no longer any
  * point to sys_device (other than not disturbing old code).
  */
 static struct platform_driver omap_mpuio_driver = {
-	.suspend_late	= omap_mpuio_suspend_late,
-	.resume_early	= omap_mpuio_resume_early,
 	.driver		= {
 		.name	= "mpuio",
+		.pm	= &omap_mpuio_dev_pm_ops,
 	},
 };
 
-- 
cgit v1.2.3


From 6effa8f6fc786f00e3a23eae605e0f2e8e748faa Mon Sep 17 00:00:00 2001
From: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Date: Wed, 22 Jul 2009 11:56:20 +0900
Subject: x86, mce: Rename incorrect macro name "CONFIG_X86_THRESHOLD"

CONFIG_X86_THRESHOLD used in arch/x86/kernel/irqinit.c is always
undefined.  Rename it to the correct name "CONFIG_X86_MCE_THRESHOLD".

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <4A667FD4.3010509@hitachi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/irqinit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 696f0e475c2..92b7703d3d5 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -187,7 +187,7 @@ static void __init apic_intr_init(void)
 #ifdef CONFIG_X86_THERMAL_VECTOR
 	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 #endif
-#ifdef CONFIG_X86_THRESHOLD
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 #endif
 #if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
-- 
cgit v1.2.3


From 9fadfd1adff28a8895de8df9e8a778c44958840f Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed, 22 Jul 2009 12:29:41 +0800
Subject: crypto: sha512-s390 - Add export/import support

This patch adds export/import support to sha512-s390 (which includes
sha384-s390).  The exported type is defined by struct sha512_state,
which is basically the entire descriptor state of sha512_generic.

Since sha512-s390 only supports a 64-bit byte count the import
function will reject anything that exceeds that.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha512_s390.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index 83192bfc804..b4b3438ae77 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -13,7 +13,10 @@
  *
  */
 #include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 #include "sha.h"
@@ -37,12 +40,42 @@ static int sha512_init(struct shash_desc *desc)
 	return 0;
 }
 
+static int sha512_export(struct shash_desc *desc, void *out)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha512_state *octx = out;
+
+	octx->count[0] = sctx->count;
+	octx->count[1] = 0;
+	memcpy(octx->state, sctx->state, sizeof(octx->state));
+	memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+	return 0;
+}
+
+static int sha512_import(struct shash_desc *desc, const u8 *in)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha512_state *ictx = in;
+
+	if (unlikely(ictx->count[1]))
+		return -ERANGE;
+	sctx->count = ictx->count[0];
+
+	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+	memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+	sctx->func = KIMD_SHA_512;
+	return 0;
+}
+
 static struct shash_alg sha512_alg = {
 	.digestsize	=	SHA512_DIGEST_SIZE,
 	.init		=	sha512_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha512_export,
+	.import		=	sha512_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha512_state),
 	.base		=	{
 		.cra_name	=	"sha512",
 		.cra_driver_name=	"sha512-s390",
@@ -78,7 +111,10 @@ static struct shash_alg sha384_alg = {
 	.init		=	sha384_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha512_export,
+	.import		=	sha512_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha512_state),
 	.base		=	{
 		.cra_name	=	"sha384",
 		.cra_driver_name=	"sha384-s390",
-- 
cgit v1.2.3


From c0b96cf639aa1bfa8983f734d4225091aa813e00 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 22 Jul 2009 16:50:57 +0900
Subject: sh: Provide _PAGE_SPECIAL for 32-bit.

Allocate one of the unused PTE bits for _PAGE_SPECIAL directly. This is
prep work for fast gup and the zero page revival.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/pgtable_32.h | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 72ea209195b..0db19db913c 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -20,7 +20,7 @@
  * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
  *
  * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
- *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
+ *   Bit 10 is used for _PAGE_ACCESSED, and bit 11 is used for _PAGE_SPECIAL.
  *
  * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
  *   and timing control which (together with bit 0) are moved into the
@@ -52,6 +52,7 @@
 #define _PAGE_PROTNONE	0x200		/* software: if not present  */
 #define _PAGE_ACCESSED	0x400		/* software: page referenced */
 #define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
+#define _PAGE_SPECIAL	0x800		/* software: special page */
 
 #define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
 #define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
@@ -148,8 +149,12 @@
 # define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
 #endif
 
+/*
+ * Mask of bits that are to be preserved accross pgprot changes.
+ */
 #define _PAGE_CHG_MASK \
-	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
+	 _PAGE_DIRTY | _PAGE_SPECIAL)
 
 #ifndef __ASSEMBLY__
 
@@ -328,7 +333,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 #define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
 #define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
 #define pte_file(pte)		((pte).pte_low & _PAGE_FILE)
-#define pte_special(pte)	(0)
+#define pte_special(pte)	((pte).pte_low & _PAGE_SPECIAL)
 
 #ifdef CONFIG_X2TLB
 #define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
@@ -358,8 +363,9 @@ PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
 PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
 PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
 PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkspecial, |= _PAGE_SPECIAL);
 
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+#define __HAVE_ARCH_PTE_SPECIAL
 
 /*
  * Macro and implementation to make a page protection as uncachable.
-- 
cgit v1.2.3


From 2277ab4a1df50e05bc732fe9488d4e902bb8399a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 22 Jul 2009 19:20:49 +0900
Subject: sh: Migrate from PG_mapped to PG_dcache_dirty.

This inverts the delayed dcache flush a bit to be more in line with other
platforms. At the same time this also gives us the ability to do some
more optimizations and cleanup. Now that the update_mmu_cache() callsite
only tests for the bit, the implementation can gradually be split out and
made generic, rather than relying on special implementations for each of
the peculiar CPU types.

SH7705 in 32kB mode and SH-4 still need slightly different handling, but
this is something that can remain isolated in the varying page copy/clear
routines. On top of that, SH-X3 is dcache coherent, so there is no need
to bother with any of these tests in the PTEAEX version of
update_mmu_cache(), so we kill that off too.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/page.h               |  6 +++
 arch/sh/include/asm/pgtable.h            |  7 ---
 arch/sh/include/cpu-sh3/cpu/cacheflush.h |  5 +--
 arch/sh/include/cpu-sh4/cpu/cacheflush.h |  2 +-
 arch/sh/mm/cache-sh4.c                   | 10 ++++-
 arch/sh/mm/cache-sh7705.c                |  7 ++-
 arch/sh/mm/pg-sh4.c                      | 74 +++++++++++++-------------------
 arch/sh/mm/pg-sh7705.c                   | 52 ++++------------------
 arch/sh/mm/tlb-pteaex.c                  | 17 --------
 arch/sh/mm/tlb-sh3.c                     | 20 ++++-----
 arch/sh/mm/tlb-sh4.c                     | 23 +++++-----
 11 files changed, 81 insertions(+), 142 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 49592c780a6..a31ab40040f 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -50,6 +50,12 @@ extern unsigned long shm_align_mask;
 extern unsigned long max_low_pfn, min_low_pfn;
 extern unsigned long memory_start, memory_end;
 
+static inline unsigned long
+pages_do_alias(unsigned long addr1, unsigned long addr2)
+{
+	return (addr1 ^ addr2) & shm_align_mask;
+}
+
 extern void clear_page(void *to);
 extern void copy_page(void *to, void *from);
 
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index 2a011b18090..d9f68f9c3cb 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -133,13 +133,6 @@ typedef pte_t *pte_addr_t;
  */
 #define pgtable_cache_init()	do { } while (0)
 
-#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
-	defined(CONFIG_SH7705_CACHE_32KB))
-struct mm_struct;
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-#endif
-
 struct vm_area_struct;
 extern void update_mmu_cache(struct vm_area_struct * vma,
 			     unsigned long address, pte_t pte);
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
index 1ac27aae670..6485ad5649a 100644
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -15,10 +15,7 @@
  * SH4. Unlike the SH4 this is a unified cache so we need to do some work
  * in mmap when 'exec'ing a new binary
  */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped	PG_arch_1
+#define PG_dcache_dirty	PG_arch_1
 
 void flush_cache_all(void);
 void flush_cache_mm(struct mm_struct *mm);
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index 065306d376e..3564f172219 100644
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -38,6 +38,6 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 /* Initialization of P3 area for copy_user_page */
 void p3_cache_init(void);
 
-#define PG_mapped	PG_arch_1
+#define PG_dcache_dirty	PG_arch_1
 
 #endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 5cfe08dbb59..c3a09b27f8d 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/io.h>
 #include <linux/mutex.h>
+#include <linux/fs.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
@@ -246,7 +247,14 @@ static inline void flush_cache_4096(unsigned long start,
  */
 void flush_dcache_page(struct page *page)
 {
-	if (test_bit(PG_mapped, &page->flags)) {
+	struct address_space *mapping = page_mapping(page);
+
+#ifndef CONFIG_SMP
+	if (mapping && !mapping_mapped(mapping))
+		set_bit(PG_dcache_dirty, &page->flags);
+	else
+#endif
+	{
 		unsigned long phys = PHYSADDR(page_address(page));
 		unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
 		int i, n;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 22dacc77882..fa37bff306b 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
+#include <linux/fs.h>
 #include <linux/threads.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
@@ -128,7 +129,11 @@ static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
  */
 void flush_dcache_page(struct page *page)
 {
-	if (test_bit(PG_mapped, &page->flags))
+	struct address_space *mapping = page_mapping(page);
+
+	if (mapping && !mapping_mapped(mapping))
+		set_bit(PG_dcache_dirty, &page->flags);
+	else
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 2fe14da1f83..f3c4b2a54fc 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -15,8 +15,6 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-#define CACHE_ALIAS (current_cpu_data.dcache.alias_mask)
-
 #define kmap_get_fixmap_pte(vaddr)                                     \
 	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
 
@@ -68,10 +66,9 @@ static inline void kunmap_coherent(struct page *page)
  */
 void clear_user_page(void *to, unsigned long address, struct page *page)
 {
-	__set_bit(PG_mapped, &page->flags);
-
 	clear_page(to);
-	if ((((address & PAGE_MASK) ^ (unsigned long)to) & CACHE_ALIAS))
+
+	if (pages_do_alias((unsigned long)to, address & PAGE_MASK))
 		__flush_wback_region(to, PAGE_SIZE);
 }
 
@@ -79,13 +76,14 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long vaddr, void *dst, const void *src,
 		       unsigned long len)
 {
-	void *vto;
-
-	__set_bit(PG_mapped, &page->flags);
-
-	vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-	memcpy(vto, src, len);
-	kunmap_coherent(vto);
+	if (page_mapped(page) && !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(vto, src, len);
+		kunmap_coherent(vto);
+	} else {
+		memcpy(dst, src, len);
+		set_bit(PG_dcache_dirty, &page->flags);
+	}
 
 	if (vma->vm_flags & VM_EXEC)
 		flush_cache_page(vma, vaddr, page_to_pfn(page));
@@ -95,13 +93,14 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 			 unsigned long vaddr, void *dst, const void *src,
 			 unsigned long len)
 {
-	void *vfrom;
-
-	__set_bit(PG_mapped, &page->flags);
-
-	vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-	memcpy(dst, vfrom, len);
-	kunmap_coherent(vfrom);
+	if (page_mapped(page) && !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(dst, vfrom, len);
+		kunmap_coherent(vfrom);
+	} else {
+		memcpy(dst, src, len);
+		set_bit(PG_dcache_dirty, &page->flags);
+	}
 }
 
 void copy_user_highpage(struct page *to, struct page *from,
@@ -109,14 +108,19 @@ void copy_user_highpage(struct page *to, struct page *from,
 {
 	void *vfrom, *vto;
 
-	__set_bit(PG_mapped, &to->flags);
-
 	vto = kmap_atomic(to, KM_USER1);
-	vfrom = kmap_coherent(from, vaddr);
-	copy_page(vto, vfrom);
-	kunmap_coherent(vfrom);
 
-	if (((vaddr ^ (unsigned long)vto) & CACHE_ALIAS))
+	if (page_mapped(from) && !test_bit(PG_dcache_dirty, &from->flags)) {
+		vfrom = kmap_coherent(from, vaddr);
+		copy_page(vto, vfrom);
+		kunmap_coherent(vfrom);
+	} else {
+		vfrom = kmap_atomic(from, KM_USER0);
+		copy_page(vto, vfrom);
+		kunmap_atomic(vfrom, KM_USER0);
+	}
+
+	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
 		__flush_wback_region(vto, PAGE_SIZE);
 
 	kunmap_atomic(vto, KM_USER1);
@@ -124,23 +128,3 @@ void copy_user_highpage(struct page *to, struct page *from,
 	smp_wmb();
 }
 EXPORT_SYMBOL(copy_user_highpage);
-
-/*
- * For SH-4, we have our own implementation for ptep_get_and_clear
- */
-pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	pte_t pte = *ptep;
-
-	pte_clear(mm, addr, ptep);
-	if (!pte_not_present(pte)) {
-		unsigned long pfn = pte_pfn(pte);
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-			struct address_space *mapping = page_mapping(page);
-			if (!mapping || !mapping_writably_mapped(mapping))
-				__clear_bit(PG_mapped, &page->flags);
-		}
-	}
-	return pte;
-}
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index eaf25147194..684891b5c8c 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -26,7 +26,7 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-static inline void __flush_purge_virtual_region(void *p1, void *virt, int size)
+static void __flush_purge_virtual_region(void *p1, void *virt, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -75,19 +75,13 @@ static inline void __flush_purge_virtual_region(void *p1, void *virt, int size)
  */
 void clear_user_page(void *to, unsigned long address, struct page *pg)
 {
-	struct page *page = virt_to_page(to);
-
-	__set_bit(PG_mapped, &page->flags);
-	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
-		clear_page(to);
-		__flush_wback_region(to, PAGE_SIZE);
-	} else {
+	if (pages_do_alias(address, (unsigned long)to))
 		__flush_purge_virtual_region(to,
 					     (void *)(address & 0xfffff000),
 					     PAGE_SIZE);
-		clear_page(to);
-		__flush_wback_region(to, PAGE_SIZE);
-	}
+
+	clear_page(to);
+	__flush_wback_region(to, PAGE_SIZE);
 }
 
 /*
@@ -98,41 +92,11 @@ void clear_user_page(void *to, unsigned long address, struct page *pg)
  */
 void copy_user_page(void *to, void *from, unsigned long address, struct page *pg)
 {
-	struct page *page = virt_to_page(to);
-
-
-	__set_bit(PG_mapped, &page->flags);
-	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
-		copy_page(to, from);
-		__flush_wback_region(to, PAGE_SIZE);
-	} else {
+	if (pages_do_alias(address, (unsigned long)to))
 		__flush_purge_virtual_region(to,
 					     (void *)(address & 0xfffff000),
 					     PAGE_SIZE);
-		copy_page(to, from);
-		__flush_wback_region(to, PAGE_SIZE);
-	}
-}
 
-/*
- * For SH7705, we have our own implementation for ptep_get_and_clear
- * Copied from pg-sh4.c
- */
-pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	pte_t pte = *ptep;
-
-	pte_clear(mm, addr, ptep);
-	if (!pte_not_present(pte)) {
-		unsigned long pfn = pte_pfn(pte);
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-			struct address_space *mapping = page_mapping(page);
-			if (!mapping || !mapping_writably_mapped(mapping))
-				__clear_bit(PG_mapped, &page->flags);
-		}
-	}
-
-	return pte;
+	copy_page(to, from);
+	__flush_wback_region(to, PAGE_SIZE);
 }
-
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
index 2aab3ea934d..c39b7736335 100644
--- a/arch/sh/mm/tlb-pteaex.c
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -27,23 +27,6 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
-#ifndef CONFIG_CACHE_OFF
-	{
-		unsigned long pfn = pte_pfn(pte);
-
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
-
-			if (!test_bit(PG_mapped, &page->flags)) {
-				unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-				__flush_wback_region((void *)P1SEGADDR(phys),
-						     PAGE_SIZE);
-				__set_bit(PG_mapped, &page->flags);
-			}
-		}
-	}
-#endif
-
 	local_irq_save(flags);
 
 	/* Set PTEH register */
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 17cb7c3adf2..9b8459c74ab 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -33,25 +33,25 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	unsigned long flags;
 	unsigned long pteval;
 	unsigned long vpn;
+	unsigned long pfn = pte_pfn(pte);
+	struct page *page;
 
 	/* Ptrace may call this routine. */
 	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
+	page = pfn_to_page(pfn);
+	if (pfn_valid(pfn) && page_mapping(page)) {
 #if defined(CONFIG_SH7705_CACHE_32KB)
-	{
-		struct page *page = pte_page(pte);
-		unsigned long pfn = pte_pfn(pte);
+		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+		if (dirty) {
+			unsigned long addr = (unsigned long)page_address(page);
 
-		if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) {
-			unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-
-			__flush_wback_region((void *)P1SEGADDR(phys),
-					     PAGE_SIZE);
-			__set_bit(PG_mapped, &page->flags);
+			if (pages_do_alias(addr, address & PAGE_MASK))
+				__flush_wback_region((void *)addr, PAGE_SIZE);
 		}
-	}
 #endif
+	}
 
 	local_irq_save(flags);
 
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index f0c7b7397fa..cf50082d243 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -21,27 +21,26 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	unsigned long flags;
 	unsigned long pteval;
 	unsigned long vpn;
+	unsigned long pfn = pte_pfn(pte);
+	struct page *page;
 
 	/* Ptrace may call this routine. */
 	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
-#ifndef CONFIG_CACHE_OFF
-	{
-		unsigned long pfn = pte_pfn(pte);
+	page = pfn_to_page(pfn);
+	if (pfn_valid(pfn) && page_mapping(page)) {
+#ifndef CONFIG_SMP
+		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+		if (dirty) {
 
-		if (pfn_valid(pfn)) {
-			struct page *page = pfn_to_page(pfn);
+			unsigned long addr = (unsigned long)page_address(page);
 
-			if (!test_bit(PG_mapped, &page->flags)) {
-				unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-				__flush_wback_region((void *)P1SEGADDR(phys),
-						     PAGE_SIZE);
-				__set_bit(PG_mapped, &page->flags);
-			}
+			if (pages_do_alias(addr, address & PAGE_MASK))
+				__flush_wback_region((void *)addr, PAGE_SIZE);
 		}
-	}
 #endif
+	}
 
 	local_irq_save(flags);
 
-- 
cgit v1.2.3


From 9b7019ae6a542a801a80df6694c66e240e2c3e39 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 22 Jul 2009 16:31:36 +0200
Subject: perf_counter: Remove unused variables

Fix a gcc unused variables warning.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
---
 arch/x86/kernel/cpu/perf_counter.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 7e346d4bc0f..a7aa8f90095 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -1570,8 +1570,6 @@ static struct x86_pmu amd_pmu = {
 
 static int p6_pmu_init(void)
 {
-	int high, low;
-
 	switch (boot_cpu_data.x86_model) {
 	case 1:
 	case 3:  /* Pentium Pro */
-- 
cgit v1.2.3


From 2cb078603abb612e3bcd428fb8122c3d39e08832 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 22 Jul 2009 09:59:35 -0700
Subject: x86, amd: Don't probe for extended APIC ID if APICs are disabled

If we've logically disabled apics, don't probe the PCI space for the
AMD extended APIC ID.

[ Impact: prevent boot crash under Xen. ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reported-by: Bastian Blank <bastian@waldi.eu.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/amd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 28e5f595604..e2485b03f1c 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -356,7 +356,7 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 #endif
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
 	/* check CPU config space for extended APIC ID */
-	if (c->x86 >= 0xf) {
+	if (cpu_has_apic && c->x86 >= 0xf) {
 		unsigned int val;
 		val = read_pci_config(0, 24, 0, 0x68);
 		if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
-- 
cgit v1.2.3


From 1d3e216f1d303878d7204de94dee251bc2702175 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Tue, 21 Jul 2009 17:09:52 +0300
Subject: [ARM] pxa/em-x270: fix compile failure when CONFIG_APM_EMULATION=n

If CONFIG_APM_EMULATION=n em-x270 build fails with linker error:

arch/arm/mach-pxa/built-in.o: In function `em_x270_battery_critical': em-x270.c:(.text+0x12c0): undefined reference to `apm_queue_event'
arch/arm/mach-pxa/built-in.o: In function `em_x270_battery_low': em-x270.c:(.text+0x12c8): undefined reference to `apm_queue_event'
make: *** [.tmp_vmlinux1] Error 1

Fix it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/em-x270.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 63b10d9bb1d..9cd09465a0e 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1141,12 +1141,16 @@ struct power_supply_info em_x270_psy_info = {
 
 static void em_x270_battery_low(void)
 {
+#if defined(CONFIG_APM_EMULATION)
 	apm_queue_event(APM_LOW_BATTERY);
+#endif
 }
 
 static void em_x270_battery_critical(void)
 {
+#if defined(CONFIG_APM_EMULATION)
 	apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
 }
 
 struct da9030_battery_info em_x270_batterty_info = {
-- 
cgit v1.2.3


From 2c59b0b70b9d5d61c726f179724660c4c2423f31 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 22 Jul 2009 14:41:35 +0000
Subject: usb: m66592-udc platform data on_chip support

Convert the m66592-udc driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_BUILT_IN_M66592 ugliness.

This makes the code cleaner and also allows us to support
both external and internal m66592 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip m66592 without modifying the Kconfig.

The patch adds a m66592 header file for platform data
and ties in platform data to the existing m66592 devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-highlander/setup.c | 7 +++++++
 arch/sh/boards/mach-x3proto/setup.c    | 7 +++++++
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 8 +++++++-
 3 files changed, 21 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 1639f891500..566e69d8d72 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -22,6 +22,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
@@ -60,6 +61,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -81,6 +87,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index 8913ae39a80..efe4cb9f8a7 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -89,6 +90,11 @@ static struct platform_device r8a66597_usb_host_device = {
 	.resource	= r8a66597_usb_host_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
 static struct resource m66592_usb_peripheral_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -109,6 +115,7 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.dev = {
 		.dma_mask		= NULL,		/* don't use dma */
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
 	.resource	= m66592_usb_peripheral_resources,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index ea524a2da3e..0bad14a4423 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -13,6 +13,7 @@
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
 #include <linux/uio_driver.h>
+#include <linux/usb/m66592.h>
 #include <linux/sh_timer.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
@@ -47,9 +48,13 @@ static struct platform_device rtc_device = {
 	.resource	= rtc_resources,
 };
 
+static struct m66592_platdata usbf_platdata = {
+	.on_chip = 1,
+};
+
 static struct resource usbf_resources[] = {
 	[0] = {
-		.name	= "m66592_udc",
+		.name	= "USBF",
 		.start	= 0x04480000,
 		.end	= 0x044800FF,
 		.flags	= IORESOURCE_MEM,
@@ -67,6 +72,7 @@ static struct platform_device usbf_device = {
 	.dev = {
 		.dma_mask		= NULL,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(usbf_resources),
 	.resource	= usbf_resources,
-- 
cgit v1.2.3


From 955c9863bb5855a994751843e7066017edc00410 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 22 Jul 2009 15:14:29 +0000
Subject: sh: convert processor device setup functions to arch_initcall()

Convert the processor platform device setup
functions from __initcall() and sometimes
device_initcall() to arch_initcall().

This makes sure that the platform devices are
registered a bit earlier so the devices are
available when drivers register using initcall
levels earlier than device_initcall().

A good example is platform devices needed by
i2c-sh_mobile.c which registers a bit earlier
using subsys_initcall().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2/setup-sh7619.c  | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-mxg.c    | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7705.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh770x.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7710.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7720.c  | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh7750.c  | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh7760.c  | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-shx3.c   | 2 +-
 arch/sh/kernel/cpu/sh5/setup-sh5.c     | 2 +-
 24 files changed, 24 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 13798733f2d..8555c05e866 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -187,7 +187,7 @@ static int __init sh7619_devices_setup(void)
 	return platform_add_devices(sh7619_devices,
 				    ARRAY_SIZE(sh7619_devices));
 }
-__initcall(sh7619_devices_setup);
+arch_initcall(sh7619_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index 869c2da4820..b6737644531 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -238,7 +238,7 @@ static int __init mxg_devices_setup(void)
 	return platform_add_devices(mxg_devices,
 				    ARRAY_SIZE(mxg_devices));
 }
-__initcall(mxg_devices_setup);
+arch_initcall(mxg_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index d8febe12806..fbde5b75deb 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -357,7 +357,7 @@ static int __init sh7201_devices_setup(void)
 	return platform_add_devices(sh7201_devices,
 				    ARRAY_SIZE(sh7201_devices));
 }
-__initcall(sh7201_devices_setup);
+arch_initcall(sh7201_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 62e3039d239..d3fd536c9a8 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -367,7 +367,7 @@ static int __init sh7203_devices_setup(void)
 	return platform_add_devices(sh7203_devices,
 				    ARRAY_SIZE(sh7203_devices));
 }
-__initcall(sh7203_devices_setup);
+arch_initcall(sh7203_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 3e6f3d7a58b..a9ccc5e8d9e 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -338,7 +338,7 @@ static int __init sh7206_devices_setup(void)
 	return platform_add_devices(sh7206_devices,
 				    ARRAY_SIZE(sh7206_devices));
 }
-__initcall(sh7206_devices_setup);
+arch_initcall(sh7206_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 88f742fed9e..c2310598387 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -222,7 +222,7 @@ static int __init sh7705_devices_setup(void)
 	return platform_add_devices(sh7705_devices,
 				    ARRAY_SIZE(sh7705_devices));
 }
-__initcall(sh7705_devices_setup);
+arch_initcall(sh7705_devices_setup);
 
 static struct platform_device *sh7705_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index c5630679858..347ab35d069 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -250,7 +250,7 @@ static int __init sh770x_devices_setup(void)
 	return platform_add_devices(sh770x_devices,
 		ARRAY_SIZE(sh770x_devices));
 }
-__initcall(sh770x_devices_setup);
+arch_initcall(sh770x_devices_setup);
 
 static struct platform_device *sh770x_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index efa76c8148f..717e90ae109 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -226,7 +226,7 @@ static int __init sh7710_devices_setup(void)
 	return platform_add_devices(sh7710_devices,
 				    ARRAY_SIZE(sh7710_devices));
 }
-__initcall(sh7710_devices_setup);
+arch_initcall(sh7710_devices_setup);
 
 static struct platform_device *sh7710_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 5b2107798ed..74d8baaf8e9 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -388,7 +388,7 @@ static int __init sh7720_devices_setup(void)
 	return platform_add_devices(sh7720_devices,
 				    ARRAY_SIZE(sh7720_devices));
 }
-__initcall(sh7720_devices_setup);
+arch_initcall(sh7720_devices_setup);
 
 static struct platform_device *sh7720_early_devices[] __initdata = {
 	&cmt0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 6d088d12359..de4827df19a 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -138,7 +138,7 @@ static int __init sh4202_devices_setup(void)
 	return platform_add_devices(sh4202_devices,
 				    ARRAY_SIZE(sh4202_devices));
 }
-__initcall(sh4202_devices_setup);
+arch_initcall(sh4202_devices_setup);
 
 static struct platform_device *sh4202_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 851672d15cf..1b8b122e8f3 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -239,7 +239,7 @@ static int __init sh7750_devices_setup(void)
 	return platform_add_devices(sh7750_devices,
 				    ARRAY_SIZE(sh7750_devices));
 }
-__initcall(sh7750_devices_setup);
+arch_initcall(sh7750_devices_setup);
 
 static struct platform_device *sh7750_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 5b822519bd9..7fbb7be9284 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -265,7 +265,7 @@ static int __init sh7760_devices_setup(void)
 	return platform_add_devices(sh7760_devices,
 				    ARRAY_SIZE(sh7760_devices));
 }
-__initcall(sh7760_devices_setup);
+arch_initcall(sh7760_devices_setup);
 
 static struct platform_device *sh7760_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6307e087c86..ac4d5672ec1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -325,7 +325,7 @@ static int __init sh7343_devices_setup(void)
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
-__initcall(sh7343_devices_setup);
+arch_initcall(sh7343_devices_setup);
 
 static struct platform_device *sh7343_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index f6d20881356..4a9010bf4fd 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -318,7 +318,7 @@ static int __init sh7366_devices_setup(void)
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
-__initcall(sh7366_devices_setup);
+arch_initcall(sh7366_devices_setup);
 
 static struct platform_device *sh7366_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 0bad14a4423..67b0d87fcb2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -365,7 +365,7 @@ static int __init sh7722_devices_setup(void)
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
-__initcall(sh7722_devices_setup);
+arch_initcall(sh7722_devices_setup);
 
 static struct platform_device *sh7722_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 28516499a2c..26dc4d32325 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -473,7 +473,7 @@ static int __init sh7723_devices_setup(void)
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
-__initcall(sh7723_devices_setup);
+arch_initcall(sh7723_devices_setup);
 
 static struct platform_device *sh7723_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index e5ac9eb11c6..a04edaab9a2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -508,7 +508,7 @@ static int __init sh7724_devices_setup(void)
 	return platform_add_devices(sh7724_devices,
 				    ARRAY_SIZE(sh7724_devices));
 }
-device_initcall(sh7724_devices_setup);
+arch_initcall(sh7724_devices_setup);
 
 static struct platform_device *sh7724_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f1e0c0d36da..4659fff6b84 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -314,7 +314,7 @@ static int __init sh7763_devices_setup(void)
 	return platform_add_devices(sh7763_devices,
 				    ARRAY_SIZE(sh7763_devices));
 }
-__initcall(sh7763_devices_setup);
+arch_initcall(sh7763_devices_setup);
 
 static struct platform_device *sh7763_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 1e86209db28..eead08d89d3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -368,7 +368,7 @@ static int __init sh7770_devices_setup(void)
 	return platform_add_devices(sh7770_devices,
 				    ARRAY_SIZE(sh7770_devices));
 }
-__initcall(sh7770_devices_setup);
+arch_initcall(sh7770_devices_setup);
 
 static struct platform_device *sh7770_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 715e05b431e..2c901f44695 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -256,7 +256,7 @@ static int __init sh7780_devices_setup(void)
 	return platform_add_devices(sh7780_devices,
 				    ARRAY_SIZE(sh7780_devices));
 }
-__initcall(sh7780_devices_setup);
+arch_initcall(sh7780_devices_setup);
 
 static struct platform_device *sh7780_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index af561402570..7f6c718b6c3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -263,7 +263,7 @@ static int __init sh7785_devices_setup(void)
 	return platform_add_devices(sh7785_devices,
 				    ARRAY_SIZE(sh7785_devices));
 }
-__initcall(sh7785_devices_setup);
+arch_initcall(sh7785_devices_setup);
 
 static struct platform_device *sh7785_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index b70049470a0..0104a8ec536 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -547,7 +547,7 @@ static int __init sh7786_devices_setup(void)
 	return platform_add_devices(sh7786_devices,
 				    ARRAY_SIZE(sh7786_devices));
 }
-device_initcall(sh7786_devices_setup);
+arch_initcall(sh7786_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 53c65fd9cce..07f078961c7 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -256,7 +256,7 @@ static int __init shx3_devices_setup(void)
 	return platform_add_devices(shx3_devices,
 				    ARRAY_SIZE(shx3_devices));
 }
-__initcall(shx3_devices_setup);
+arch_initcall(shx3_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
index f5ff1ac57fc..6a0f82f7003 100644
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -186,7 +186,7 @@ static int __init sh5_devices_setup(void)
 	return platform_add_devices(sh5_devices,
 				    ARRAY_SIZE(sh5_devices));
 }
-__initcall(sh5_devices_setup);
+arch_initcall(sh5_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
-- 
cgit v1.2.3


From e7d165146a7de5ceb4f68e188b2679f003744f54 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 22 Jul 2009 16:20:54 +0000
Subject: sh: kfr2r09 board support - SCIF console

This patch adds basic kfr2r09 board support. Only
the SCIF1 console is supported with this patch, but
this patch and a proper sh7724 configuration is all
that is needed. Combine with an initramfs to have a
small RAM based kernel and distribution booted as
zImage from RAM via JTAG.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile                     |  1 +
 arch/sh/boards/Kconfig               |  7 ++++++
 arch/sh/boards/mach-kfr2r09/Makefile |  1 +
 arch/sh/boards/mach-kfr2r09/setup.c  | 48 ++++++++++++++++++++++++++++++++++++
 4 files changed, 57 insertions(+)
 create mode 100644 arch/sh/boards/mach-kfr2r09/Makefile
 create mode 100644 arch/sh/boards/mach-kfr2r09/setup.c

(limited to 'arch')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 75d049b03f7..d7358d70f15 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -136,6 +136,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_KFR2R09)			+= mach-kfr2r09
 machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
 machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
 machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 2b1af0eefa6..db04c85971a 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -193,6 +193,13 @@ config SH_AP325RXA
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
 
+config SH_KFR2R09
+	bool "KFR2R09"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  "Kit For R2R for 2009" support.
+
 config SH_SH7763RDP
 	bool "SH7763RDP"
 	depends on CPU_SUBTYPE_SH7763
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
new file mode 100644
index 00000000000..77037567633
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -0,0 +1 @@
+obj-y	 := setup.o
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
new file mode 100644
index 00000000000..224318abc9e
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -0,0 +1,48 @@
+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <cpu/sh7724.h>
+
+static int __init kfr2r09_devices_setup(void)
+{
+	/* enable SCIF1 serial port for YC401 console support */
+	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+
+	return 0;
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+	.mv_name		= "kfr2r09",
+	.mv_mode_pins		= kfr2r09_mode_pins,
+};
-- 
cgit v1.2.3


From a366aa64f3a51ca3deebe74447f929a5614d9b90 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 22 Jul 2009 16:22:28 +0000
Subject: sh: kfr2r09 board support - NOR flash

This patch adds NOR flash support to the kfr2r09 board.

NOR flash support is added by describing the NOR flash
chip hooked up to CS0 as platform device data for the
physmap-flash MTD driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 54 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 224318abc9e..382bf188430 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
@@ -18,13 +19,64 @@
 #include <asm/io.h>
 #include <cpu/sh7724.h>
 
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+	{
+		.name = "boot",
+		.offset = 0,
+		.size = (4 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+	.width		= 2,
+	.parts		= kfr2r09_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= kfr2r09_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nor_flash_resources),
+	.dev		= {
+		.platform_data = &kfr2r09_nor_flash_data,
+	},
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+	&kfr2r09_nor_flash_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+
 static int __init kfr2r09_devices_setup(void)
 {
 	/* enable SCIF1 serial port for YC401 console support */
 	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
 	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
 
-	return 0;
+	/* setup NOR flash at CS0 */
+	ctrl_outl(0x36db0400, BSC_CS0BCR);
+	ctrl_outl(0x00000500, BSC_CS0WCR);
+
+	return platform_add_devices(kfr2r09_devices,
+				    ARRAY_SIZE(kfr2r09_devices));
 }
 device_initcall(kfr2r09_devices_setup);
 
-- 
cgit v1.2.3


From 39a6bf1426af4aed2348bb533481027862346a37 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 22 Jul 2009 16:23:45 +0000
Subject: sh: kfr2r09 board support - KEYSC keypad

This patch adds KEYSC keypad support to the kfr2r09 board.

The keys driven by the sh7724 on-chip KEYSC block are
described as a platform device and platform data for
the sh_keysc driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 53 +++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 382bf188430..bf5f8f8d3b5 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -14,9 +14,11 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/input.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
+#include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 
 static struct mtd_partition kfr2r09_nor_flash_partitions[] =
@@ -58,8 +60,46 @@ static struct platform_device kfr2r09_nor_flash_device = {
 	},
 };
 
+static struct sh_keysc_info kfr2r09_sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 10,
+	.keycodes = {
+		KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
+		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
+		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
+		KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
+		KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
+		0, 0, 0, 0, 0
+	},
+};
+
+static struct resource kfr2r09_sh_keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
+	.resource       = kfr2r09_sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_keysc_info,
+	},
+};
+
 static struct platform_device *kfr2r09_devices[] __initdata = {
 	&kfr2r09_nor_flash_device,
+	&kfr2r09_sh_keysc_device,
 };
 
 #define BSC_CS0BCR 0xfec10004
@@ -75,6 +115,19 @@ static int __init kfr2r09_devices_setup(void)
 	ctrl_outl(0x36db0400, BSC_CS0BCR);
 	ctrl_outl(0x00000500, BSC_CS0WCR);
 
+	/* setup KEYSC pins */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN0, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }
-- 
cgit v1.2.3


From 52ec7752b457311f10f5a8d16faa8ac2e684eb65 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 22 Jul 2009 21:51:40 -0700
Subject: Input: pxa27x_keypad - remove extra clk_disable

clk_disable() in remove method is not needed since we already
have clk_disable in pxa27x_keypad_close().

Also make sure the driver uses resource_size() and helpers from
include/input/matrix_keypad.h

Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-pxa/include/mach/pxa27x_keypad.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index d5a48a96dea..63e8965ad85 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -2,6 +2,7 @@
 #define __ASM_ARCH_PXA27x_KEYPAD_H
 
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 
 #define MAX_MATRIX_KEY_ROWS	(8)
 #define MAX_MATRIX_KEY_COLS	(8)
@@ -51,8 +52,6 @@ struct pxa27x_keypad_platform_data {
 	unsigned int	debounce_interval;
 };
 
-#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
-
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
 
 #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
-- 
cgit v1.2.3


From dc78baa2b90b289590911b40b6800f77d0dc935a Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 3 Jul 2009 19:24:33 +0200
Subject: dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller

This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on
at91sam9rl chip. It will be used on other products in the future.

This first release covers only the memory-to-memory tranfer type. This is the
only tranfer type supported by this chip.  On other products, it will be used
also for peripheral DMA transfer (slave API support to come).

I used dmatest client without problem in different configurations to test it.

Full documentation for this controller can be found in the SAM9RL datasheet:
http://www.atmel.com/dyn/products/product_card.asp?part_id=4243

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-at91/include/mach/at_hdmac.h | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/at_hdmac.h

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
new file mode 100644
index 00000000000..21a5554f9cb
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -0,0 +1,26 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+#endif /* AT_HDMAC_H */
-- 
cgit v1.2.3


From 808347f6a31792079e345ec865e9cfcb6e8ae6b2 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 22 Jul 2009 20:04:45 +0200
Subject: dmaengine: at_hdmac: add DMA slave transfers

This patch for at_hdmac adds the slave transfers capability to the Atmel DMA
controller available on some AT91 SOCs. This allow peripheral to memory and
memory to peripheral transfers with hardware handshaking.

Slave structure for controller specific information is passed through channel
private data. This at_dma_slave structure is defined in at_hdmac.h header file
and relative hardware definition are moved to this file from at_hdmac_regs.h.
Doing this we allow the channel configuration from platform definition code.

This work is intensively based on dw_dmac and several slave implementations.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-at91/include/mach/at_hdmac.h | 76 ++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
index 21a5554f9cb..187cb58345c 100644
--- a/arch/arm/mach-at91/include/mach/at_hdmac.h
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -23,4 +23,80 @@ struct at_dma_platform_data {
 	dma_cap_mask_t  cap_mask;
 };
 
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
 #endif /* AT_HDMAC_H */
-- 
cgit v1.2.3


From 4832958218f96f98009c5e01729fbe2b48c7124c Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Wed, 22 Jul 2009 21:51:34 -0700
Subject: Input: add Blackfin rotary input driver

This driver handles the Blackfin on-chip rotary peripheral.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/blackfin/include/asm/bfin_rotary.h | 39 +++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 arch/blackfin/include/asm/bfin_rotary.h

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
new file mode 100644
index 00000000000..425ece64fd5
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_rotary.h
@@ -0,0 +1,39 @@
+/*
+ * board initialization should put one of these structures into platform_data
+ * and place the bfin-rotary onto platform_bus named "bfin-rotary".
+ */
+
+#ifndef _BFIN_ROTARY_H
+#define _BFIN_ROTARY_H
+
+/* mode bitmasks */
+#define ROT_QUAD_ENC	CNTMODE_QUADENC	/* quadrature/grey code encoder mode */
+#define ROT_BIN_ENC	CNTMODE_BINENC	/* binary encoder mode */
+#define ROT_UD_CNT	CNTMODE_UDCNT	/* rotary counter mode */
+#define ROT_DIR_CNT	CNTMODE_DIRCNT	/* direction counter mode */
+
+#define ROT_DEBE	DEBE		/* Debounce Enable */
+
+#define ROT_CDGINV	CDGINV		/* CDG Pin Polarity Invert */
+#define ROT_CUDINV	CUDINV		/* CUD Pin Polarity Invert */
+#define ROT_CZMINV	CZMINV		/* CZM Pin Polarity Invert */
+
+struct bfin_rotary_platform_data {
+	/* set rotary UP KEY_### or BTN_### in case you prefer
+	 * bfin-rotary to send EV_KEY otherwise set 0
+	 */
+	unsigned int rotary_up_key;
+	/* set rotary DOWN KEY_### or BTN_### in case you prefer
+	 * bfin-rotary to send EV_KEY otherwise set 0
+	 */
+	unsigned int rotary_down_key;
+	/* set rotary BUTTON KEY_### or BTN_### */
+	unsigned int rotary_button_key;
+	/* set rotary Relative Axis REL_### in case you prefer
+	 * bfin-rotary to send EV_REL otherwise set 0
+	 */
+	unsigned int rotary_rel_code;
+	unsigned short debounce;	/* 0..17 */
+	unsigned short mode;
+};
+#endif
-- 
cgit v1.2.3


From 3174c88af4b6b2e81cacfaa2bb90cc7abe36f1cc Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 20 Jul 2009 18:12:23 +0100
Subject: [ARM] 5611/1: ep93xx: update ts72xx nor flash support

Update the NOR flash support for TS-7200.

The TS-7200 models all have 16-bit NOR flash.  Update the platform
init to support this.

Remove the private TS72XX_NOR_* defines and use the common ep93xx
defines for the external chip select physical base address instead.

Move the NOR flash registration into a static __init function.  When
the NAND flash support is updated this function will also be used
to register the NAND flash for the TS-7250 and TS-7260.

Tested-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ts72xx.h |  3 ---
 arch/arm/mach-ep93xx/ts72xx.c              | 18 +++++++++++++-----
 2 files changed, 13 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c4..411734422c1 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -41,9 +41,6 @@
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
 
-#define TS72XX_NOR_PHYS_BASE		0x60000000
-#define TS72XX_NOR2_PHYS_BASE		0x62000000
-
 #define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
 #define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
 #define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d3482..aaf1371412a 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void)
 	}
 }
 
+/*************************************************************************
+ * NOR flash (TS-7200 only)
+ *************************************************************************/
 static struct physmap_flash_data ts72xx_flash_data = {
-	.width		= 1,
+	.width		= 2,
 };
 
 static struct resource ts72xx_flash_resource = {
-	.start		= TS72XX_NOR_PHYS_BASE,
-	.end		= TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = {
 	.resource	= &ts72xx_flash_resource,
 };
 
+static void __init ts72xx_register_flash(void)
+{
+	if (board_is_ts7200())
+		platform_device_register(&ts72xx_flash);
+}
+
 static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
 static void __init ts72xx_init_machine(void)
 {
 	ep93xx_init_devices();
-	if (board_is_ts7200())
-		platform_device_register(&ts72xx_flash);
+	ts72xx_register_flash();
 	platform_device_register(&ts72xx_rtc_device);
 
 	ep93xx_register_eth(&ts72xx_eth_data, 1);
-- 
cgit v1.2.3


From 42ff4cf957b695250534e540375e23507c722327 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 17 Jul 2009 14:42:33 +0100
Subject: [ARM] 5610/1: Add fmi resource define for w90p910 platform

Add fmi resource define for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 7a62bd348e8..3b9fa312d9f 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -228,6 +228,28 @@ struct platform_device w90x900_device_usbgadget = {
 };
 EXPORT_SYMBOL(w90x900_device_usbgadget);
 
+/* FMI Device */
+
+static struct resource w90p910_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_fmi = {
+	.name		= "w90p910-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
+	.resource	= w90p910_fmi_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -242,6 +264,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_rtc,
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
+	&w90p910_device_fmi,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From 768db4e04b4c969cf3a9e81a79a10af6468ca56d Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:47:57 +0100
Subject: [ARM] 5616/1: Add mac resource define for w90p910 mac driver

Add mac resource define for w90p910 mac driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3b9fa312d9f..2e56d84c632 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -250,6 +250,38 @@ static struct platform_device w90p910_device_fmi = {
 	.resource	= w90p910_fmi_resource,
 };
 
+/* MAC device */
+
+static struct resource w90x900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device w90p910_device_emc = {
+	.name		= "w90p910-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
+	.resource	= w90x900_emc_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -265,6 +297,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
+	&w90p910_device_emc,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From b48147663b2582bfb91a2bf39f9d1ffe8f209122 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:50:20 +0100
Subject: [ARM] 5617/1: rename this spi device as w90p910-spi

When programming clock api, I named this spi device
as w90p910-usi, now, I think named it as w90p910-spi better

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/w90p910.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1bde69eac3d..6ebf5cfc78d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -93,7 +93,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
 };
 
 /* Initial serial platform data */
-- 
cgit v1.2.3


From c16d5d5657294e782d505efd00bbf2452d6aa0ca Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:51:46 +0100
Subject: [ARM] 5618/1: Add spi resource define for w90p910 spi driver

Add spi resource define for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 61 +++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 2e56d84c632..3e3a267b2dd 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -20,7 +20,13 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -35,6 +41,8 @@
 
 #define W90P910_FLASH_BASE	0xA0000000
 #define W90P910_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
 
 static struct mtd_partition w90p910_flash_partitions[] = {
 	{
@@ -282,6 +290,56 @@ static struct platform_device w90p910_device_emc = {
 	}
 };
 
+/* SPI device */
+
+static struct resource w90p910_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_spi = {
+	.name		= "w90p910-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
+	.resource	= w90p910_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition w90p910_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data w90p910_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  w90p910_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info w90p910_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &w90p910_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -298,6 +356,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
+	&w90p910_device_spi,
 };
 
 static void __init w90p910evb_map_io(void)
@@ -309,6 +368,8 @@ static void __init w90p910evb_map_io(void)
 static void __init w90p910evb_init(void)
 {
 	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
+	spi_register_board_info(w90p910_spi_board_info,
+					ARRAY_SIZE(w90p910_spi_board_info));
 }
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
-- 
cgit v1.2.3


From 3f3f1d9d8de10a5dad0d22046cdd26dfb93d05c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:52:51 +0100
Subject: [ARM] 5619/1: Add spi mfp api for w90p910 spi driver

Add spi mfp api for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 38 +++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index 8aec34b044c..e11a32b6856 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -34,6 +34,12 @@
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
 
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
 static DECLARE_MUTEX(mfp_sem);
 
 void mfp_set_groupf(struct device *dev)
@@ -118,3 +124,35 @@ void mfp_set_groupi(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
-- 
cgit v1.2.3


From 5bdef865eb358b6f3760e25e591ae115e9eeddef Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 23 Jul 2009 08:59:48 +0000
Subject: sh: kfr2r09 board support - mach-type and defconfig

This patch adds a defconfig and a mach-types entry for
the kfr2r09 board.

At this point only a few devices like SCIF, KEYSC and
NOR Flash are supported together with sh7724 devices
such as IIC0, IIC1 and the multimedia blocks exported
via UIO.

Kexec is supported, but booting from flash is not (yet).

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/kfr2r09_defconfig | 877 ++++++++++++++++++++++++++++++++++++++
 arch/sh/tools/mach-types          |   1 +
 2 files changed, 878 insertions(+)
 create mode 100644 arch/sh/configs/kfr2r09_defconfig

(limited to 'arch')

diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
new file mode 100644
index 00000000000..90e575c34d5
--- /dev/null
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -0,0 +1,877 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 23 17:45:09 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+CONFIG_SH_KFR2R09=y
+
+#
+# Timer and clock configuration
+#
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index fec3a53b865..09eef360dde 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -56,3 +56,4 @@ SH7785LCR		SH_SH7785LCR
 URQUELL			SH_URQUELL
 ESPT			SH_ESPT
 POLARIS			SH_POLARIS
+KFR2R09			SH_KFR2R09
-- 
cgit v1.2.3


From 4fef5f90edc80aae92efec049750de93be9e25cb Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Wed, 1 Jul 2009 20:20:23 +0530
Subject: OMAP4: sDMA: Update the request lines and new registers.

This patch updates the platform dma.h with new dma request lines
for OMAP4 peripherals. Also additional hardware register of OMAP4
sDMA module are included.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/dma.h | 88 +++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 7b939cc0196..72f680b7180 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -122,6 +122,11 @@
 #define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
 #define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
 
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n)		(0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n)		(0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n)		(0x60 * (n) + 0xd8)
+
 /* Dummy defines to keep multi-omap compiles happy */
 #define OMAP1_DMA_REVISION		0
 #define OMAP1_DMA_IRQSTATUS_L0		0
@@ -311,6 +316,89 @@
 #define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
 
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ	6	/* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2		7	/* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1		9	/* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2		10	/* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3		12	/* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4		13	/* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ	14	/* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX		17	/* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX		18	/* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX		19	/* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX		20	/* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX		31	/* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX		32	/* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX		33	/* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX		34	/* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX		55	/* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX		56	/* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX		57	/* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX		58	/* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX		59	/* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX		60	/* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3		64	/* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP		65	/* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL		66	/* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0	72	/* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1	73	/* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2	74	/* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3	75	/* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ	76	/* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX		80	/* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0	81	/* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1	82	/* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2	83	/* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3	84	/* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0		101	/* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1		102	/* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2		103	/* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3		104	/* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4		105	/* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5		106	/* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6		107	/* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7		108	/* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX		124	/* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX		125	/* S_DMA_124 */
+
 /*----------------------------------------------------------------------------*/
 
 /* Hardware registers for LCD DMA */
-- 
cgit v1.2.3


From d6c585a4342a2ff627a29f9aea77c5ed4cd76023 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 24 Jul 2009 08:34:59 +0200
Subject: x86: geode: Mark mfgpt irq IRQF_TIMER to prevent resume failure

Timer interrupts are excluded from being disabled during suspend. The
clock events code manages the disabling of clock events on its own
because the timer interrupt needs to be functional before the resume
code reenables the device interrupts.

The mfgpt timer request its interrupt without setting the IRQF_TIMER
flag so suspend_device_irqs() disables it as well which results in a
fatal resume failure.

Adding IRQF_TIMER to the interupt flags when requesting the mrgpt
timer interrupt solves the problem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: Andres Salomon <dilinger@debian.org>
Cc: stable@kernel.org
---
 arch/x86/kernel/mfgpt_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 846510b78a0..2a62d843f01 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -347,7 +347,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 
 static struct irqaction mfgptirq  = {
 	.handler = mfgpt_tick,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
 	.name = "mfgpt-timer"
 };
 
-- 
cgit v1.2.3


From 5f954c3426190f7ae432a09abd62164d5d14c709 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 24 Jul 2009 12:39:49 +0200
Subject: [S390] hibernation: fix lowcore handling

Our swsusp_arch_suspend() backend implementation disables prefixing
by setting the contents of the prefix register to 0.
However afterwards common code functions are called which might
access percpu data structures.
Since the lowcore contains e.g. the percpu base pointer this isn't
a good idea. So fix this by copying the hibernating cpu's lowcore to
absolute address zero.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/early.c       |  4 ++--
 arch/s390/power/swsusp_asm64.S | 13 ++++++++-----
 2 files changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index f9b144049dc..8d15314381e 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -210,7 +210,7 @@ static noinline __init void detect_machine_type(void)
 		machine_flags |= MACHINE_FLAG_VM;
 }
 
-static void early_pgm_check_handler(void)
+static __init void early_pgm_check_handler(void)
 {
 	unsigned long addr;
 	const struct exception_table_entry *fixup;
@@ -222,7 +222,7 @@ static void early_pgm_check_handler(void)
 	S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
 }
 
-void setup_lowcore_early(void)
+static noinline __init void setup_lowcore_early(void)
 {
 	psw_t psw;
 
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
index 76d688da32f..e27bd316489 100644
--- a/arch/s390/power/swsusp_asm64.S
+++ b/arch/s390/power/swsusp_asm64.S
@@ -40,11 +40,11 @@ swsusp_arch_suspend:
 	/* Store prefix register on stack */
 	stpx	__SF_EMPTY(%r15)
 
-	/* Setup base register for lowcore (absolute 0) */
-	llgf	%r1,__SF_EMPTY(%r15)
+	/* Save prefix register contents for lowcore */
+	llgf	%r4,__SF_EMPTY(%r15)
 
 	/* Get pointer to save area */
-	aghi	%r1,0x1000
+	lghi	%r1,0x1000
 
 	/* Store registers */
 	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
@@ -79,8 +79,11 @@ swsusp_arch_suspend:
 	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
 	spx	__SF_EMPTY(%r15)
 
-	/* Setup lowcore */
-	brasl	%r14,setup_lowcore_early
+	lghi	%r2,0
+	lghi	%r3,2*PAGE_SIZE
+	lghi	%r5,2*PAGE_SIZE
+1:	mvcle	%r2,%r4,0
+	jo	1b
 
 	/* Save image */
 	brasl	%r14,swsusp_save
-- 
cgit v1.2.3


From c63b196afcf22405527abe4c2c57926a5bbd6fc9 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 24 Jul 2009 12:39:50 +0200
Subject: [S390] hibernation: fix register corruption on machine checks

swsusp_arch_suspend() actually saves all cpu register contents on
hibernation.
Machine checks must be disabled since swsusp_arch_suspend() stores
register contents to their lowcore save areas. That's the same
place where register contents on machine checks would be saved.
To avoid register corruption disable machine checks.
We must also disable machine checks in the new psw mask for
program checks, since swsusp_arch_suspend() may generate program
checks.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/power/swsusp.c       | 36 ++++++++++++++++++++++++------------
 arch/s390/power/swsusp_asm64.S | 22 +---------------------
 2 files changed, 25 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
index e6a4fe9f5f2..bd1f5c6b0b8 100644
--- a/arch/s390/power/swsusp.c
+++ b/arch/s390/power/swsusp.c
@@ -7,24 +7,36 @@
  *
  */
 
+#include <asm/system.h>
 
-/*
- * save CPU registers before creating a hibernation image and before
- * restoring the memory state from it
- */
 void save_processor_state(void)
 {
-	/* implentation contained in the
-	 * swsusp_arch_suspend function
+	/* swsusp_arch_suspend() actually saves all cpu register contents.
+	 * Machine checks must be disabled since swsusp_arch_suspend() stores
+	 * register contents to their lowcore save areas. That's the same
+	 * place where register contents on machine checks would be saved.
+	 * To avoid register corruption disable machine checks.
+	 * We must also disable machine checks in the new psw mask for
+	 * program checks, since swsusp_arch_suspend() may generate program
+	 * checks. Disabling machine checks for all other new psw masks is
+	 * just paranoia.
 	 */
+	local_mcck_disable();
+	/* Disable lowcore protection */
+	__ctl_clear_bit(0,28);
+	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
 }
 
-/*
- * restore the contents of CPU registers
- */
 void restore_processor_state(void)
 {
-	/* implentation contained in the
-	 * swsusp_arch_resume function
-	 */
+	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+	/* Enable lowcore protection */
+	__ctl_set_bit(0,28);
+	local_mcck_enable();
 }
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
index e27bd316489..b26df5c5933 100644
--- a/arch/s390/power/swsusp_asm64.S
+++ b/arch/s390/power/swsusp_asm64.S
@@ -32,11 +32,6 @@ swsusp_arch_suspend:
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
-	/* Switch off lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	ni	__SF_EMPTY+4(%r15),0xef
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Store prefix register on stack */
 	stpx	__SF_EMPTY(%r15)
 
@@ -88,11 +83,6 @@ swsusp_arch_suspend:
 	/* Save image */
 	brasl	%r14,swsusp_save
 
-	/* Switch on lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	oi	__SF_EMPTY+4(%r15),0x10
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Restore prefix register and return */
 	lghi	%r1,0x1000
 	spx	0x318(%r1)
@@ -120,11 +110,6 @@ swsusp_arch_resume:
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
-	/* Switch off lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	ni	__SF_EMPTY+4(%r15),0xef
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Set prefix page to zero */
 	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
 	spx	__SF_EMPTY(%r15)
@@ -178,7 +163,7 @@ swsusp_arch_resume:
 	/* Load old stack */
 	lg	%r15,0x2f8(%r13)
 
-	/* Pointer to save arae */
+	/* Pointer to save area */
 	lghi	%r13,0x1000
 
 #ifdef CONFIG_SMP
@@ -190,11 +175,6 @@ swsusp_arch_resume:
 	/* Restore prefix register */
 	spx	0x318(%r13)
 
-	/* Switch on lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	oi	__SF_EMPTY+4(%r15),0x10
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Activate DAT */
 	stosm	__SF_EMPTY(%r15),0x04
 
-- 
cgit v1.2.3


From 3a6ba4600d6fb913ddb0dd08843ad75405795883 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 24 Jul 2009 12:39:51 +0200
Subject: [S390] vdso: fix per cpu area allocation

vdso per cpu area allocation in smp_prepare_cpus() happens with GFP_KERNEL
but irqs disabled. Triggers this one:

Badness at kernel/lockdep.c:2280
Modules linked in:
CPU: 0 Not tainted 2.6.30 #2
Process swapper (pid: 1, task: 000000003fe88000, ksp: 000000003fe87eb8)
Krnl PSW : 0400c00180000000 0000000000083360 (lockdep_trace_alloc+0xec/0xf8)
[...]
Call Trace:
([<00000000000832b6>] lockdep_trace_alloc+0x42/0xf8)
 [<00000000000b1880>] __alloc_pages_internal+0x3e8/0x5c4
 [<00000000000b1b4a>] __get_free_pages+0x3a/0xb0
 [<0000000000026546>] vdso_alloc_per_cpu+0x6a/0x18c
 [<00000000005eff82>] smp_prepare_cpus+0x322/0x594
 [<00000000005e8232>] kernel_init+0x76/0x398
 [<000000000001bb1e>] kernel_thread_starter+0x6/0xc
 [<000000000001bb18>] kernel_thread_starter+0x0/0xc

Fix this by moving the allocation out of the irqs disabled section.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2270730f535..be2cae08340 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -687,13 +687,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE)
 		lowcore->extended_save_area_addr = (u32) save_area;
-#else
-	if (vdso_alloc_per_cpu(smp_processor_id(), lowcore))
-		BUG();
 #endif
 	set_prefix((u32)(unsigned long) lowcore);
 	local_mcck_enable();
 	local_irq_enable();
+#ifdef CONFIG_64BIT
+	if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore))
+		BUG();
+#endif
 	for_each_possible_cpu(cpu)
 		if (cpu != smp_processor_id())
 			smp_create_idle(cpu);
-- 
cgit v1.2.3


From 1277580fe5dfb5aef84854bdb7983657df00b920 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 24 Jul 2009 12:39:52 +0200
Subject: [S390] vdso: clock_gettime of CLOCK_THREAD_CPUTIME_ID with noexec=on

The combination of noexec=on and a clock_gettime call with clock id
CLOCK_THREAD_CPUTIME_ID is broken. The vdso code switches to the
access register mode to get access to the per-cpu data structure to
execute the magic ectg instruction. After the ectg instruction the
code always switches back to the primary mode but for noexec=on the
correct mode is the secondary mode. The effect of the bug is that the
user space program looses the access to all mappings without PROT_EXEC,
e.g. the stack. The problem is fixed by restoring the mode that has
been active before the switch to the access register mode.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/vdso64/clock_gettime.S | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 79dbfee831e..49106c6e6f8 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -88,10 +88,17 @@ __kernel_clock_gettime:
 	llilh	%r4,0x0100
 	sar	%a4,%r4
 	lghi	%r4,0
+	epsw	%r5,0
 	sacf	512				/* Magic ectg instruction */
 	.insn	ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4
-	sacf	0
-	sar	%a4,%r2
+	tml	%r5,0x4000
+	jo	11f
+	tml	%r5,0x8000
+	jno	10f
+	sacf	256
+	j	11f
+10:	sacf	0
+11:	sar	%a4,%r2
 	algr	%r1,%r0				/* r1 = cputime as TOD value */
 	mghi	%r1,1000			/* convert to nanoseconds */
 	srlg	%r1,%r1,12			/* r1 = cputime in nanosec */
-- 
cgit v1.2.3


From 88987ef91b99cf99bc5d167caeb31d4958fbf931 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:52 +0100
Subject: Thumb-2: Add some .align statements to the .S files

Since the Thumb-2 instructions can be 16-bit wide, data in the .text
sections may not be aligned to a 32-bit word and this leads to unaligned
exceptions. This patch does not affect the ARM code generation.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 3 +++
 arch/arm/kernel/entry-armv.S    | 4 ++++
 arch/arm/kernel/head-common.S   | 2 ++
 arch/arm/lib/sha1.S             | 2 ++
 arch/arm/vfp/entry.S            | 2 ++
 5 files changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4515728c534..82f5fcfd956 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -291,6 +291,7 @@ wont_overwrite:	mov	r0, r4
 		bl	decompress_kernel
 		b	call_kernel
 
+		.align	2
 		.type	LC0, #object
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
@@ -589,6 +590,7 @@ call_cache_fn:	adr	r12, proc_types
  * methods.  Writeback caches _must_ have the flush method
  * defined.
  */
+		.align	2
 		.type	proc_types,#object
 proc_types:
 		.word	0x41560600		@ ARM6/610
@@ -945,6 +947,7 @@ __armv3_mpu_cache_flush:
  * memory, which again must be relocatable.
  */
 #ifdef DEBUG
+		.align	2
 		.type	phexbuf,#object
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..0befd1cabf4 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1065,6 +1065,10 @@ vector_\name:
 	ldr	lr, [pc, lr, lsl #2]
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
+
+	.align	2
+	@ handler addresses follow this label
+1:
 	.endm
 
 	.globl	__stubs_start
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 991952c644d..dbfaef07a1f 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -14,6 +14,7 @@
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 
+	.align	2
 	.type	__switch_data, %object
 __switch_data:
 	.long	__mmap_switched
@@ -185,6 +186,7 @@ ENDPROC(lookup_processor_type)
  * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
+	.align	2
 	.long	__proc_info_begin
 	.long	__proc_info_end
 3:	.long	.
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index a16fb208c84..09b548cac1a 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -187,6 +187,7 @@ ENTRY(sha_transform)
 
 ENDPROC(sha_transform)
 
+	.align	2
 .L_sha_K:
 	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
 
@@ -195,6 +196,7 @@ ENDPROC(sha_transform)
  * void sha_init(__u32 *buf)
  */
 
+	.align	2
 .L_sha_initial_digest:
 	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
 
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index a2bed62aec2..4fa9903b83c 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -42,6 +42,7 @@ ENTRY(vfp_null_entry)
 	mov	pc, lr
 ENDPROC(vfp_null_entry)
 
+	.align	2
 .LCvfp:
 	.word	vfp_vector
 
@@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry)
 	mov	pc, r9			@ we have handled the fault
 ENDPROC(vfp_testing_entry)
 
+	.align	2
 VFP_arch_address:
 	.word	VFP_arch
 
-- 
cgit v1.2.3


From 0becb088501886f37ade38762c8eaaf4263572cc Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:53 +0100
Subject: Thumb-2: Add macros for the unified assembler syntax

This patch adds various C and assembler macros that help with using
the unified assembler syntax for compiling files to either ARM or
Thumb-2 modes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig               |   3 +
 arch/arm/Makefile              |   2 +-
 arch/arm/include/asm/unified.h | 126 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 130 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/unified.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..da28e7ba608 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,9 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config ARM_ASM_UNIFIED
+	bool
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..3505572a21e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -95,7 +95,7 @@ endif
 
 # Need -Uarm for gcc < 3.x
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
new file mode 100644
index 00000000000..073e85b9b96
--- /dev/null
+++ b/arch/arm/include/asm/unified.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+	.syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE	PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...)	x
+#define W(instr)	instr.w
+#define BSYM(sym)	sym + 1
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE	0
+
+#define ARM(x...)	x
+#define THUMB(x...)
+#define W(instr)	instr
+#define BSYM(sym)	sym
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+	.macro	it, cond
+	.endm
+	.macro	itt, cond
+	.endm
+	.macro	ite, cond
+	.endm
+	.macro	ittt, cond
+	.endm
+	.macro	itte, cond
+	.endm
+	.macro	itet, cond
+	.endm
+	.macro	itee, cond
+	.endm
+	.macro	itttt, cond
+	.endm
+	.macro	ittte, cond
+	.endm
+	.macro	ittet, cond
+	.endm
+	.macro	ittee, cond
+	.endm
+	.macro	itett, cond
+	.endm
+	.macro	itete, cond
+	.endm
+	.macro	iteet, cond
+	.endm
+	.macro	iteee, cond
+	.endm
+#else	/* !__ASSEMBLY__ */
+__asm__(
+"	.macro	it, cond\n"
+"	.endm\n"
+"	.macro	itt, cond\n"
+"	.endm\n"
+"	.macro	ite, cond\n"
+"	.endm\n"
+"	.macro	ittt, cond\n"
+"	.endm\n"
+"	.macro	itte, cond\n"
+"	.endm\n"
+"	.macro	itet, cond\n"
+"	.endm\n"
+"	.macro	itee, cond\n"
+"	.endm\n"
+"	.macro	itttt, cond\n"
+"	.endm\n"
+"	.macro	ittte, cond\n"
+"	.endm\n"
+"	.macro	ittet, cond\n"
+"	.endm\n"
+"	.macro	ittee, cond\n"
+"	.endm\n"
+"	.macro	itett, cond\n"
+"	.endm\n"
+"	.macro	itete, cond\n"
+"	.endm\n"
+"	.macro	iteet, cond\n"
+"	.endm\n"
+"	.macro	iteee, cond\n"
+"	.endm\n");
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_ARM_ASM_UNIFIED */
+
+#endif	/* !__ASM_UNIFIED_H */
-- 
cgit v1.2.3


From b86040a59feb255a8193173caa4d5199464433d5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:54 +0100
Subject: Thumb-2: Implementation of the unified start-up and exceptions code

This patch implements the ARM/Thumb-2 unified kernel start-up and
exception handling code.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h |  11 +++
 arch/arm/include/asm/futex.h     |   1 +
 arch/arm/kernel/entry-armv.S     | 165 +++++++++++++++++++++++----------------
 arch/arm/kernel/entry-common.S   |  28 ++-----
 arch/arm/kernel/entry-header.S   |  92 ++++++++++++++++++++--
 arch/arm/kernel/head-common.S    |  13 +--
 arch/arm/kernel/head-nommu.S     |  11 ++-
 arch/arm/kernel/head.S           |  28 ++++---
 arch/arm/kernel/process.c        |   2 +-
 arch/arm/kernel/setup.c          |  28 +++++--
 arch/arm/kernel/unwind.c         |   4 +
 11 files changed, 263 insertions(+), 120 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..1acd1da36d0 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -127,3 +127,14 @@
 #endif
 #endif
 	.endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+	.macro	setmode, mode, reg
+	mov	\reg, #\mode
+	msr	cpsr_c, \reg
+	.endm
+#else
+	.macro	setmode, mode, reg
+	msr	cpsr_c, #\mode
+	.endm
+#endif
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 9ee743b95de..bfcc15929a7 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	ldrt	%0, [%3]\n"
 	"	teq	%0, %1\n"
+	"	it	eq	@ explicit IT needed for the 2b label\n"
 	"2:	streqt	%2, [%3]\n"
 	"3:\n"
 	"	.section __ex_table,\"a\"\n"
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0befd1cabf4..468425f937d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -34,7 +34,7 @@
 	@
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
 	@
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	asm_do_IRQ
 
 #ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
 	 */
 	test_for_ipi r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_IPI
 
 #ifdef CONFIG_LOCAL_TIMERS
 	test_for_ltirq r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_local_timer
 #endif
 #endif
@@ -70,7 +70,10 @@
  */
 	.macro	inv_entry, reason
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - lr}
+ ARM(	stmib	sp, {r1 - lr}		)
+ THUMB(	stmia	sp, {r0 - r12}		)
+ THUMB(	str	sp, [sp, #S_SP]		)
+ THUMB(	str	lr, [sp, #S_LR]		)
 	mov	r1, #\reason
 	.endm
 
@@ -126,17 +129,24 @@ ENDPROC(__und_invalid)
 	.macro	svc_entry, stack_hole=0
  UNWIND(.fnstart		)
  UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole)
+	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX(	str	r0, [sp]	)	@ temporarily saved
+ SPFIX(	mov	r0, sp		)
+ SPFIX(	tst	r0, #4		)	@ test original stack alignment
+ SPFIX(	ldr	r0, [sp]	)	@ restored
+#else
  SPFIX(	tst	sp, #4		)
- SPFIX(	bicne	sp, sp, #4	)
-	stmib	sp, {r1 - r12}
+#endif
+ SPFIX(	subeq	sp, sp, #4	)
+	stmia	sp, {r1 - r12}
 
 	ldmia	r0, {r1 - r3}
-	add	r5, sp, #S_SP		@ here for interlock avoidance
+	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
 	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX(	addne	r0, r0, #4	)
-	str	r1, [sp]		@ save the "real" r0 copied
+	add	r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX(	addeq	r0, r0, #4	)
+	str	r1, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r1, lr
@@ -196,9 +206,8 @@ __dabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
@@ -225,13 +234,12 @@ __irq_svc:
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 #endif
-	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
-	msr	spsr_cxsf, r0
+	ldr	r4, [sp, #S_PSR]		@ irqs are already disabled
 #ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r0, #PSR_I_BIT
+	tst	r4, #PSR_I_BIT
 	bleq	trace_hardirqs_on
 #endif
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	svc_exit r4				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
@@ -266,7 +274,7 @@ __und_svc:
 	@  r0 - instruction
 	@
 	ldr	r0, [r2, #-4]
-	adr	r9, 1f
+	adr	r9, BSYM(1f)
 	bl	call_fpe
 
 	mov	r0, sp				@ struct pt_regs *regs
@@ -280,9 +288,8 @@ __und_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
-	msr	spsr_cxsf, lr
-	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+	ldr	r2, [sp, #S_PSR]		@ Get SVC cpsr
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
@@ -323,9 +330,8 @@ __pabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
@@ -353,7 +359,8 @@ ENDPROC(__pabt_svc)
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - r12}
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)
 
 	ldmia	r0, {r1 - r3}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
@@ -372,7 +379,8 @@ ENDPROC(__pabt_svc)
 	@ Also, separately save sp_usr and lr_usr
 	@
 	stmia	r0, {r2 - r4}
-	stmdb	r0, {sp, lr}^
+ ARM(	stmdb	r0, {sp, lr}^			)
+ THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
 	@
 	@ Enable the alignment trap while in kernel mode
@@ -427,7 +435,7 @@ __dabt_usr:
 	@
 	enable_irq
 	mov	r2, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_DataAbort
  UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
@@ -452,7 +460,9 @@ __irq_usr:
 	ldr	r0, [tsk, #TI_PREEMPT]
 	str	r8, [tsk, #TI_PREEMPT]
 	teq	r0, r7
-	strne	r0, [r0, -r0]
+ ARM(	strne	r0, [r0, -r0]	)
+ THUMB(	movne	r0, #0		)
+ THUMB(	strne	r0, [r0]	)
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on
@@ -476,9 +486,10 @@ __und_usr:
 	@
 	@  r0 - instruction
 	@
-	adr	r9, ret_from_exception
-	adr	lr, __und_usr_unknown
+	adr	r9, BSYM(ret_from_exception)
+	adr	lr, BSYM(__und_usr_unknown)
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
+	itet	eq				@ explicit IT needed for the 1f label
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
@@ -488,7 +499,10 @@ __und_usr:
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
-2:	ldrht	r5, [r4], #2
+2:
+ ARM(	ldrht	r5, [r4], #2	)
+ THUMB(	ldrht	r5, [r4]	)
+ THUMB(	add	r4, r4, #2	)
 	and	r0, r5, #0xf800			@ mask bits 111x x... .... ....
 	cmp	r0, #0xe800			@ 32bit instruction if xx != 0
 	blo	__und_usr_unknown
@@ -577,9 +591,11 @@ call_fpe:
 	moveq	pc, lr
 	get_thread_info r10			@ get current thread
 	and	r8, r0, #0x00000f00		@ mask out CP number
+ THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
 	add	r6, r10, #TI_USED_CP
-	strb	r7, [r6, r8, lsr #8]		@ set appropriate used_cp[]
+ ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
+ THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -587,36 +603,38 @@ call_fpe:
 	movcss	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
 	bcs	iwmmxt_task_enable
 #endif
-	add	pc, pc, r8, lsr #6
-	mov	r0, r0
-
-	mov	pc, lr				@ CP#0
-	b	do_fpe				@ CP#1 (FPE)
-	b	do_fpe				@ CP#2 (FPE)
-	mov	pc, lr				@ CP#3
+ ARM(	add	pc, pc, r8, lsr #6	)
+ THUMB(	lsl	r8, r8, #2		)
+ THUMB(	add	pc, r8			)
+	nop
+
+	W(mov)	pc, lr				@ CP#0
+	W(b)	do_fpe				@ CP#1 (FPE)
+	W(b)	do_fpe				@ CP#2 (FPE)
+	W(mov)	pc, lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	mov	pc, lr				@ CP#4
-	mov	pc, lr				@ CP#5
-	mov	pc, lr				@ CP#6
+	W(mov)	pc, lr				@ CP#4
+	W(mov)	pc, lr				@ CP#5
+	W(mov)	pc, lr				@ CP#6
 #endif
-	mov	pc, lr				@ CP#7
-	mov	pc, lr				@ CP#8
-	mov	pc, lr				@ CP#9
+	W(mov)	pc, lr				@ CP#7
+	W(mov)	pc, lr				@ CP#8
+	W(mov)	pc, lr				@ CP#9
 #ifdef CONFIG_VFP
-	b	do_vfp				@ CP#10 (VFP)
-	b	do_vfp				@ CP#11 (VFP)
+	W(b)	do_vfp				@ CP#10 (VFP)
+	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	mov	pc, lr				@ CP#10 (VFP)
-	mov	pc, lr				@ CP#11 (VFP)
+	W(mov)	pc, lr				@ CP#10 (VFP)
+	W(mov)	pc, lr				@ CP#11 (VFP)
 #endif
-	mov	pc, lr				@ CP#12
-	mov	pc, lr				@ CP#13
-	mov	pc, lr				@ CP#14 (Debug)
-	mov	pc, lr				@ CP#15 (Control)
+	W(mov)	pc, lr				@ CP#12
+	W(mov)	pc, lr				@ CP#13
+	W(mov)	pc, lr				@ CP#14 (Debug)
+	W(mov)	pc, lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
@@ -667,7 +685,7 @@ no_fp:	mov	pc, lr
 __und_usr_unknown:
 	enable_irq
 	mov	r0, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_undefinstr
 ENDPROC(__und_usr_unknown)
 
@@ -711,7 +729,10 @@ ENTRY(__switch_to)
  UNWIND(.cantunwind	)
 	add	ip, r1, #TI_CPU_SAVE
 	ldr	r3, [r2, #TI_TP_VALUE]
-	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
+ ARM(	stmia	ip!, {r4 - sl, fp, sp, lr} )	@ Store most regs on stack
+ THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
+ THUMB(	str	sp, [ip], #4		   )
+ THUMB(	str	lr, [ip], #4		   )
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
@@ -736,8 +757,12 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+ THUMB(	mov	ip, r4			   )
 	mov	r0, r5
-	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
+ THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
+ THUMB(	ldr	sp, [ip], #4		   )
+ THUMB(	ldr	pc, [ip]		   )
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
@@ -772,6 +797,7 @@ ENDPROC(__switch_to)
  * if your compiled code is not going to use the new instructions for other
  * purpose.
  */
+ THUMB(	.arm	)
 
 	.macro	usr_ret, reg
 #ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1046,7 @@ __kuser_helper_version:				@ 0xffff0ffc
 	.globl	__kuser_helper_end
 __kuser_helper_end:
 
+ THUMB(	.thumb	)
 
 /*
  * Vector stubs.
@@ -1054,15 +1081,17 @@ vector_\name:
 	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
 	mrs	r0, cpsr
-	eor	r0, r0, #(\mode ^ SVC_MODE)
+	eor	r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
 	msr	spsr_cxsf, r0
 
 	@
 	@ the branch table must immediately follow this code
 	@
 	and	lr, lr, #0x0f
+ THUMB(	adr	r0, 1f			)
+ THUMB(	ldr	lr, [r0, lr, lsl #2]	)
 	mov	r0, sp
-	ldr	lr, [pc, lr, lsl #2]
+ ARM(	ldr	lr, [pc, lr, lsl #2]	)
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
@@ -1206,14 +1235,16 @@ __stubs_end:
 
 	.globl	__vectors_start
 __vectors_start:
-	swi	SYS_ERROR0
-	b	vector_und + stubs_offset
-	ldr	pc, .LCvswi + stubs_offset
-	b	vector_pabt + stubs_offset
-	b	vector_dabt + stubs_offset
-	b	vector_addrexcptn + stubs_offset
-	b	vector_irq + stubs_offset
-	b	vector_fiq + stubs_offset
+ ARM(	swi	SYS_ERROR0	)
+ THUMB(	svc	#0		)
+ THUMB(	nop			)
+	W(b)	vector_und + stubs_offset
+	W(ldr)	pc, .LCvswi + stubs_offset
+	W(b)	vector_pabt + stubs_offset
+	W(b)	vector_dabt + stubs_offset
+	W(b)	vector_addrexcptn + stubs_offset
+	W(b)	vector_irq + stubs_offset
+	W(b)	vector_fiq + stubs_offset
 
 	.globl	__vectors_end
 __vectors_end:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..a0540c9f1f0 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -33,14 +33,7 @@ ret_fast_syscall:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ fast_restore_user_regs
-	ldr	r1, [sp, #S_OFF + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #S_OFF + S_PC]!	@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 
 /*
@@ -73,14 +66,7 @@ no_work_pending:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ slow_restore_user_regs
-	ldr	r1, [sp, #S_PSR]		@ get calling cpsr
-	ldr	lr, [sp, #S_PC]!		@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 0, offset = 0
 ENDPROC(ret_to_user)
 
 /*
@@ -182,8 +168,10 @@ ftrace_stub:
 ENTRY(vector_swi)
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			@ Calling sp, lr
+ ARM(	add	r8, sp, #S_PC		)
+ ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
+ THUMB(	mov	r8, sp			)
+ THUMB(	store_user_sp_lr r8, r10, S_SP	)	@ calling sp, lr
 	mrs	r8, spsr			@ called from non-FIQ mode, so ok.
 	str	lr, [sp, #S_PC]			@ Save calling PC
 	str	r8, [sp, #S_PSR]		@ Save CPSR
@@ -272,7 +260,7 @@ ENTRY(vector_swi)
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, ret_fast_syscall		@ return address
+	adr	lr, BSYM(ret_fast_syscall)	@ return address
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
@@ -293,7 +281,7 @@ __sys_trace:
 	mov	r0, #0				@ trace entry [IP = 0]
 	bl	syscall_trace
 
-	adr	lr, __sys_trace_return		@ return address
+	adr	lr, BSYM(__sys_trace_return)	@ return address
 	mov	scno, r0			@ syscall number (possibly new)
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 87ab4e15799..a4eaf4f920c 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -36,11 +36,6 @@
 #endif
 	.endm
 
-	.macro	get_thread_info, rd
-	mov	\rd, sp, lsr #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
 	.macro	alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
 	ldr	\rtemp, .LCcralign
@@ -49,6 +44,93 @@
 #endif
 	.endm
 
+	@
+	@ Store/load the USER SP and LR registers by switching to the SYS
+	@ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+	@ available. Should only be called from SVC mode
+	@
+	.macro	store_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	str	sp, [\rd, #\offset]		@ save sp_usr
+	str	lr, [\rd, #\offset + 4]		@ save lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+	.macro	load_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	ldr	sp, [\rd, #\offset]		@ load sp_usr
+	ldr	lr, [\rd, #\offset + 4]		@ load lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+	.macro	svc_exit, rpsr
+	msr	spsr_cxsf, \rpsr
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
+	.else
+	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_PC
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp, lsr #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#else	/* CONFIG_THUMB2_KERNEL */
+	.macro	svc_exit, rpsr
+	ldr	r0, [sp, #S_SP]			@ top of the stack
+	ldr	r1, [sp, #S_PC]			@ return address
+	tst	r0, #4				@ orig stack 8-byte aligned?
+	stmdb	r0, {r1, \rpsr}			@ rfe context
+	ldmia	sp, {r0 - r12}
+	ldr	lr, [sp, #S_LR]
+	addeq	sp, sp, #S_FRAME_SIZE - 8	@ aligned
+	addne	sp, sp, #S_FRAME_SIZE - 4	@ not aligned
+	rfeia	sp!
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	mov	r2, sp
+	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]	@ get pc
+	add	sp, sp, #\offset + S_SP
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
+	.else
+	ldmdb	sp, {r0 - r12}			@ get calling r0 - r12
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_SP
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp
+	lsr	\rd, \rd, #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*
  * These are the registers used in the syscall handler, and allow us to
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index dbfaef07a1f..93ad576b2d7 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -52,7 +52,9 @@ __mmap_switched:
 	strcc	fp, [r6],#4
 	bcc	1b
 
-	ldmia	r3, {r4, r5, r6, r7, sp}
+ ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
+ THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
+ THUMB(	ldr	sp, [r3, #16]		)
 	str	r9, [r4]			@ Save processor ID
 	str	r1, [r5]			@ Save machine type
 	str	r2, [r6]			@ Save atags pointer
@@ -156,7 +158,8 @@ ENDPROC(__error)
  */
 __lookup_processor_type:
 	adr	r3, 3f
-	ldmda	r3, {r5 - r7}
+	ldmia	r3, {r5 - r7}
+	add	r3, r3, #8
 	sub	r3, r3, r7			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
 	add	r6, r6, r3			@ physical address space
@@ -187,9 +190,9 @@ ENDPROC(lookup_processor_type)
  * more information about the __proc_info and __arch_info structures.
  */
 	.align	2
-	.long	__proc_info_begin
+3:	.long	__proc_info_begin
 	.long	__proc_info_end
-3:	.long	.
+4:	.long	.
 	.long	__arch_info_begin
 	.long	__arch_info_end
 
@@ -205,7 +208,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-	adr	r3, 3b
+	adr	r3, 4b
 	ldmia	r3, {r4, r5, r6}
 	sub	r3, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index cc87e1765ed..b16393d2b71 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -34,7 +34,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 #ifndef CONFIG_CPU_CP15
 	ldr	r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@ ENTRY(stext)
 
 	ldr	r13, __switch_data		@ address to jump to after
 						@ the initialization is done
-	adr	lr, __after_proc_init		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 /*
@@ -82,7 +84,8 @@ __after_proc_init:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-	mov	pc, r13				@ clear the BSS and jump
+	mov	r3, r13
+	mov	pc, r3				@ clear the BSS and jump
 						@ to start_kernel
 ENDPROC(__after_proc_init)
 	.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 21e17dc94cb..38ccbe1d3b2 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -76,7 +76,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@ ENTRY(stext)
 	 */
 	ldr	r13, __switch_data		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, __enable_mmu		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__enable_mmu)		@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 #if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
@@ -121,12 +123,15 @@ ENTRY(secondary_startup)
 	 * Use the page tables supplied from  __cpu_up.
 	 */
 	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r13}		@ address to jump to after
+	ldmia	r4, {r5, r7, r12}		@ address to jump to after
 	sub	r4, r4, r5			@ mmu has been enabled
 	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
-	adr	lr, __enable_mmu		@ return address
-	add	pc, r10, #PROCINFO_INITFUNC	@ initialise processor
-						@ (return control reg)
+	adr	lr, BSYM(__enable_mmu)		@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
+						  @ (return control reg)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(secondary_startup)
 
 	/*
@@ -193,8 +198,8 @@ __turn_mmu_on:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
 	mov	r3, r3
-	mov	r3, r3
-	mov	pc, r13
+	mov	r3, r13
+	mov	pc, r3
 ENDPROC(__turn_mmu_on)
 
 
@@ -235,7 +240,8 @@ __create_page_tables:
 	 * will be removed by paging_init().  We use our current program
 	 * counter to determine corresponding section base address.
 	 */
-	mov	r6, pc, lsr #20			@ start of kernel section
+	mov	r6, pc
+	mov	r6, r6, lsr #20			@ start of kernel section
 	orr	r3, r7, r6, lsl #20		@ flags + kernel base
 	str	r3, [r4, r6, lsl #2]		@ identity mapping
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 39196dff478..790fbee92ec 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bc5e4128f9f..d4d4f77c91b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 
+#include <asm/unified.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
@@ -326,26 +327,39 @@ void cpu_init(void)
 		BUG();
 	}
 
+	/*
+	 * Define the placement constraint for the inline asm directive below.
+	 * In Thumb-2, msr with an immediate value is not allowed.
+	 */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC	"r"
+#else
+#define PLC	"I"
+#endif
+
 	/*
 	 * setup stacks for re-entrant exception handlers
 	 */
 	__asm__ (
 	"msr	cpsr_c, %1\n\t"
-	"add	sp, %0, %2\n\t"
+	"add	r14, %0, %2\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %3\n\t"
-	"add	sp, %0, %4\n\t"
+	"add	r14, %0, %4\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %5\n\t"
-	"add	sp, %0, %6\n\t"
+	"add	r14, %0, %6\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %7"
 	    :
 	    : "r" (stk),
-	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 }
 
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd56e11f339..39baf1128bf 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -62,7 +62,11 @@ struct unwind_ctrl_block {
 };
 
 enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+	FP = 7,
+#else
 	FP = 11,
+#endif
 	SP = 13,
 	LR = 14,
 	PC = 15
-- 
cgit v1.2.3


From 347c8b70b1d5256e445e54e736f88d21877616cf Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:56 +0100
Subject: Thumb-2: Implement the unified arch/arm/mm support

This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/alignment.c | 20 +++++++++++++++-----
 arch/arm/mm/cache-v7.S  | 16 +++++++++++-----
 arch/arm/mm/proc-v7.S   |  5 ++++-
 3 files changed, 30 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 03cd27d917b..b270d6228fe 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -159,7 +159,9 @@ union offset_union {
 
 #define __get8_unaligned_check(ins,val,addr,err)	\
 	__asm__(					\
-	"1:	"ins"	%1, [%2], #1\n"			\
+ ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+ THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+ THUMB(	"	add	%2, %2, #1\n"	)		\
 	"2:\n"						\
 	"	.section .fixup,\"ax\"\n"		\
 	"	.align	2\n"				\
@@ -215,7 +217,9 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_16				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"2:	"ins"	%1, [%2]\n"			\
 		"3:\n"						\
@@ -245,11 +249,17 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_32				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"2:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"2:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"2:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"3:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"3:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"3:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"4:	"ins"	%1, [%2]\n"			\
 		"5:\n"						\
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index be93ff02a98..bda0ec31a4e 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -21,7 +21,7 @@
  *
  *	Flush the whole D-cache.
  *
- *	Corrupted registers: r0-r5, r7, r9-r11
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
  *
  *	- mm    - mm_struct describing address space
  */
@@ -51,8 +51,12 @@ loop1:
 loop2:
 	mov	r9, r4				@ create working copy of max way size
 loop3:
-	orr	r11, r10, r9, lsl r5		@ factor way and cache number into r11
-	orr	r11, r11, r7, lsl r2		@ factor index number into r11
+ ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r9, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r7, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
 	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
 	subs	r9, r9, #1			@ decrement the way
 	bge	loop3
@@ -82,11 +86,13 @@ ENDPROC(v7_flush_dcache_all)
  *
  */
 ENTRY(v7_flush_kern_cache_all)
-	stmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
 ENDPROC(v7_flush_kern_cache_all)
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 180a08d03a0..c19aecdb202 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -127,7 +127,9 @@ ENDPROC(cpu_v7_switch_mm)
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
+ ARM(	str	r1, [r0], #-2048	)	@ linux version
+ THUMB(	str	r1, [r0]		)	@ linux version
+ THUMB(	sub	r0, r0, #2048		)
 
 	bic	r3, r1, #0x000003f0
 	bic	r3, r3, #PTE_TYPE_MASK
@@ -273,6 +275,7 @@ __v7_setup:
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
+ THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	mov	pc, lr				@ return to head.S:__ret
 ENDPROC(__v7_setup)
 
-- 
cgit v1.2.3


From 8b592783a2e8b7721a99730bd549aab5208f36af Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: Thumb-2: Implement the unified arch/arm/lib functions

This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h   | 73 ++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/uaccess.h     |  7 ++--
 arch/arm/lib/ashldi3.S             |  4 ++-
 arch/arm/lib/ashrdi3.S             |  4 ++-
 arch/arm/lib/backtrace.S           |  8 +++--
 arch/arm/lib/clear_user.S          | 15 ++++----
 arch/arm/lib/copy_from_user.S      | 19 +++++-----
 arch/arm/lib/copy_template.S       | 24 +++++++++++--
 arch/arm/lib/copy_to_user.S        | 19 +++++-----
 arch/arm/lib/csumpartialcopyuser.S | 48 +++++++------------------
 arch/arm/lib/div64.S               |  4 ++-
 arch/arm/lib/findbit.S             | 34 +++++++++++++-----
 arch/arm/lib/getuser.S             |  5 +++
 arch/arm/lib/io-writesw-armv4.S    |  5 ++-
 arch/arm/lib/lshrdi3.S             |  4 ++-
 arch/arm/lib/memcpy.S              |  7 ++--
 arch/arm/lib/memmove.S             | 28 +++++++--------
 arch/arm/lib/putuser.S             | 15 ++++++++
 arch/arm/lib/strncpy_from_user.S   |  2 +-
 arch/arm/lib/strnlen_user.S        |  2 +-
 20 files changed, 229 insertions(+), 98 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 1acd1da36d0..2b60c7d0577 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -138,3 +138,76 @@
 	msr	cpsr_c, #\mode
 	.endm
 #endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr, #\off]
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr, #\off]
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endm
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	@ explicit IT instruction needed because of the label
+	@ introduced by the USER macro
+	.ifnc	\cond,al
+	.if	\rept == 1
+	itt	\cond
+	.elseif	\rept == 2
+	ittt	\cond
+	.else
+	.error	"Unsupported rept macro argument"
+	.endif
+	.endif
+
+	@ Slightly optimised to avoid incrementing the pointer twice
+	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+	.if	\rept == 2
+	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	.endif
+
+	add\cond \ptr, #\rept * \inc
+	.endm
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.rept	\rept
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr], #\inc
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr], #\inc
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endr
+	.endm
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0da9bc9b3b1..1d6bd40a432 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,6 +17,7 @@
 #include <asm/memory.h>
 #include <asm/domain.h>
 #include <asm/system.h>
+#include <asm/unified.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -365,8 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1]\n"		\
+ ARM(	"1:	strt	" __reg_oper1 ", [%1], #4\n"	)	\
+ ARM(	"2:	strt	" __reg_oper0 ", [%1]\n"	)	\
+ THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
+ THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 1154d924080..638deb13da1 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl)
 	rsb	ip, r2, #32
 	movmi	ah, ah, lsl r2
 	movpl	ah, al, lsl r3
-	orrmi	ah, ah, al, lsr ip
+ ARM(	orrmi	ah, ah, al, lsr ip	)
+ THUMB(	lsrmi	r3, al, ip		)
+ THUMB(	orrmi	ah, ah, r3		)
 	mov	al, al, lsl r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 9f8b35572f8..015e8aa5a1d 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, asr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, asr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index b0951d0e8b2..aaf7220d9e3 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -38,7 +38,9 @@ ENDPROC(c_backtrace)
 		beq	no_frame		@ we have no stack frames
 
 		tst	r1, #0x10		@ 26 or 32-bit mode?
-		moveq	mask, #0xfc000003	@ mask for 26-bit
+ ARM(		moveq	mask, #0xfc000003	)
+ THUMB(		moveq	mask, #0xfc000000	)
+ THUMB(		orreq	mask, #0x03		)
 		movne	mask, #0		@ mask for 32-bit
 
 1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
@@ -126,7 +128,9 @@ ENDPROC(c_backtrace)
 		mov	reg, #10
 		mov	r7, #0
 1:		mov	r3, #1
-		tst	instr, r3, lsl reg
+ ARM(		tst	instr, r3, lsl reg	)
+ THUMB(		lsl	r3, reg			)
+ THUMB(		tst	instr, r3		)
 		beq	2f
 		add	r7, r7, #1
 		teq	r7, #6
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 844f56785eb..1279abd8b88 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -27,21 +27,20 @@ WEAK(__clear_user)
 		ands	ip, r0, #3
 		beq	1f
 		cmp	ip, #2
-USER(		strbt	r2, [r0], #1)
-USER(		strlebt	r2, [r0], #1)
-USER(		strltbt	r2, [r0], #1)
+		strusr	r2, r0, 1
+		strusr	r2, r0, 1, le
+		strusr	r2, r0, 1, lt
 		rsb	ip, ip, #4
 		sub	r1, r1, ip		@  7  6  5  4  3  2  1
 1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-USER(		strplt	r2, [r0], #4)
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl, rept=2
 		bpl	1b
 		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl
 2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-USER(		strnebt	r2, [r0], #1)
-USER(		strnebt	r2, [r0], #1)
+		strusr	r2, r0, 1, ne, rept=2
 		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+		it	ne			@ explicit IT needed for the label
 USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 56799a165cc..e4fe124aced 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -33,11 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT	0
+#else
+#define LDR1W_SHIFT	1
+#endif
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-100:	ldrt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
 	.endm
 
 	.macro ldr1b ptr reg cond=al abort
-100:	ldr\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 139cce64605..805e3f8fb00 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -57,6 +57,13 @@
  *
  *	Restore registers with the values previously saved with the
  *	'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ *	Correction to be applied to the "ip" register when branching into
+ *	the ldr1w or str1w instructions (some of these macros may expand to
+ *	than one 32bit instruction in Thumb-2)
  */
 
 
@@ -99,9 +106,15 @@
 
 5:		ands	ip, r2, #28
 		rsb	ip, ip, #32
+#if LDR1W_SHIFT > 0
+		lsl	ip, ip, #LDR1W_SHIFT
+#endif
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:
+		.rept	(1 << LDR1W_SHIFT)
+		W(nop)
+		.endr
 		ldr1w	r1, r3, abort=20f
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
@@ -110,9 +123,16 @@
 		ldr1w	r1, r8, abort=20f
 		ldr1w	r1, lr, abort=20f
 
+#if LDR1W_SHIFT < STR1W_SHIFT
+		lsl	ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+		lsr	ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
 		add	pc, pc, ip
 		nop
-		nop
+		.rept	(1 << STR1W_SHIFT)
+		W(nop)
+		.endr
 		str1w	r0, r3, abort=20f
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 878820f0a32..1a71e158444 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -33,8 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#define LDR1W_SHIFT	0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT	0
+#else
+#define STR1W_SHIFT	1
+#endif
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-100:	strt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
 	.endm
 
 	.macro str1b ptr reg cond=al abort
-100:	str\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro enter reg1 reg2
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 14677fb4b0c..fd0e9dcd9fd 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -26,50 +26,28 @@
 		.endm
 
 		.macro	load1b,	reg1
-9999:		ldrbt	\reg1, [r0], $1
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
 		.endm
 
 		.macro	load2b, reg1, reg2
-9999:		ldrbt	\reg1, [r0], $1
-9998:		ldrbt	\reg2, [r0], $1
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
+		ldrusr	\reg2, r0, 1
 		.endm
 
 		.macro	load1l, reg1
-9999:		ldrt	\reg1, [r0], $4
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
 		.endm
 
 		.macro	load2l, reg1, reg2
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
 		.endm
 
 		.macro	load4l, reg1, reg2, reg3, reg4
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-9997:		ldrt	\reg3, [r0], $4
-9996:		ldrt	\reg4, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.long	9997b, 6001f
-		.long	9996b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
+		ldrusr	\reg3, r0, 4
+		ldrusr	\reg4, r0, 4
 		.endm
 
 /*
@@ -92,14 +70,14 @@
  */
 		.section .fixup,"ax"
 		.align	4
-6001:		mov	r4, #-EFAULT
+9001:		mov	r4, #-EFAULT
 		ldr	r5, [fp, #4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
 		mov	r0, #0			@ zero the buffer
-6002:		teq	r2, r1
+9002:		teq	r2, r1
 		strneb	r0, [r1], #1
-		bne	6002b
+		bne	9002b
 		load_regs
 		.previous
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 1425e789ba8..faa7748142d 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -177,7 +177,9 @@ ENTRY(__do_div64)
 	mov	yh, xh, lsr ip
 	mov	yl, xl, lsr ip
 	rsb	ip, ip, #32
-	orr	yl, yl, xh, lsl ip
+ ARM(	orr	yl, yl, xh, lsl ip	)
+ THUMB(	lsl	xh, xh, ip		)
+ THUMB(	orr	yl, yl, xh		)
 	mov	xh, xl, lsl ip
 	mov	xh, xh, lsr ip
 	mov	pc, lr
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 8c4defc4f3c..1e4cbd4e7be 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
@@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 6763088b760..a1814d92712 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -36,8 +36,13 @@ ENTRY(__get_user_1)
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2:	ldrbt	r2, [r0]
+3:	ldrbt	r3, [r0, #1]
+#else
 2:	ldrbt	r2, [r0], #1
 3:	ldrbt	r3, [r0]
+#endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
 #else
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index d6585612c86..ff4f71b579e 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -75,7 +75,10 @@ ENTRY(__raw_writesw)
 #endif
 
 .Loutsw_noalign:
-		ldr	r3, [r1, -r3]!
+ ARM(		ldr	r3, [r1, -r3]!	)
+ THUMB(		rsb	r3, r3, #0	)
+ THUMB(		ldr	r3, [r1, r3]	)
+ THUMB(		sub	r1, r3		)
 		subcs	r2, r2, #1
 		bcs	2f
 		subs	r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index 99ea338bf87..f83d449141f 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, lsr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e0d002641d3..a9b9e2287a0 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -13,8 +13,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#define LDR1W_SHIFT	0
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 12549187088..5025c863713 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -75,24 +75,24 @@ ENTRY(memmove)
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
 6:		nop
-		ldr	r3, [r1, #-4]!
-		ldr	r4, [r1, #-4]!
-		ldr	r5, [r1, #-4]!
-		ldr	r6, [r1, #-4]!
-		ldr	r7, [r1, #-4]!
-		ldr	r8, [r1, #-4]!
-		ldr	lr, [r1, #-4]!
+		W(ldr)	r3, [r1, #-4]!
+		W(ldr)	r4, [r1, #-4]!
+		W(ldr)	r5, [r1, #-4]!
+		W(ldr)	r6, [r1, #-4]!
+		W(ldr)	r7, [r1, #-4]!
+		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
 		nop
 		nop
-		str	r3, [r0, #-4]!
-		str	r4, [r0, #-4]!
-		str	r5, [r0, #-4]!
-		str	r6, [r0, #-4]!
-		str	r7, [r0, #-4]!
-		str	r8, [r0, #-4]!
-		str	lr, [r0, #-4]!
+		W(str)	r3, [r0, #-4]!
+		W(str)	r4, [r0, #-4]!
+		W(str)	r5, [r0, #-4]!
+		W(str)	r6, [r0, #-4]!
+		W(str)	r7, [r0, #-4]!
+		W(str)	r8, [r0, #-4]!
+		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 864f3c1c4f1..02fedbf07c0 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -37,6 +37,15 @@ ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2:	strbt	r2, [r0]
+3:	strbt	ip, [r0, #1]
+#else
+2:	strbt	ip, [r0]
+3:	strbt	r2, [r0, #1]
+#endif
+#else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
 2:	strbt	r2, [r0], #1
 3:	strbt	ip, [r0]
@@ -44,6 +53,7 @@ ENTRY(__put_user_2)
 2:	strbt	ip, [r0], #1
 3:	strbt	r2, [r0]
 #endif
+#endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@ ENTRY(__put_user_4)
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5:	strt	r2, [r0]
+6:	strt	r3, [r0, #4]
+#else
 5:	strt	r2, [r0], #4
 6:	strt	r3, [r0]
+#endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_8)
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 330373c26dd..1c9814f346c 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strncpy_from_user)
 	mov	ip, r1
 1:	subs	r2, r2, #1
-USER(	ldrplbt	r3, [r1], #1)
+	ldrusr	r3, r1, 1, pl
 	bmi	2f
 	strb	r3, [r0], #1
 	teq	r3, #0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 90bb9d02083..7855b290665 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strnlen_user)
 	mov	r2, r0
 1:
-USER(	ldrbt	r3, [r0], #1)
+	ldrusr	r3, r0, 1
 	teq	r3, #0
 	beq	2f
 	subs	r1, r1, #1
-- 
cgit v1.2.3


From 07f33a035ddda78095bed64f39db54334776841d Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: Thumb-2: Implement the unified VFP support

This patch modifies the VFP files for the ARM/Thumb-2 unified
assembly syntax.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/vfp/vfphw.S | 48 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 1aeae38725d..66dc2d03b7f 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -209,40 +209,55 @@ ENDPROC(vfp_save_state)
 last_VFP_context_address:
 	.word	last_VFP_context
 
-ENTRY(vfp_get_float)
-	add	pc, pc, r0, lsl #3
+	.macro	tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+	adr	\tmp, 1f
+	add	\tmp, \tmp, \base, lsl \shift
+	mov	pc, \tmp
+#else
+	add	pc, pc, \base, lsl \shift
 	mov	r0, r0
+#endif
+1:
+	.endm
+
+ENTRY(vfp_get_float)
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
+1:	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
 	mov	pc, lr
-	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
+	.org	1b + 8
+1:	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_get_float)
 
 ENTRY(vfp_put_float)
-	add	pc, pc, r1, lsl #3
-	mov	r0, r0
+	tbl_branch r1, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
+1:	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
 	mov	pc, lr
-	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
+	.org	1b + 8
+1:	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_put_float)
 
 ENTRY(vfp_get_double)
-	add	pc, pc, r0, lsl #3
-	mov	r0, r0
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmrrd	r0, r1, d\dr
+1:	fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
+1:	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 
@@ -253,17 +268,18 @@ ENTRY(vfp_get_double)
 ENDPROC(vfp_get_double)
 
 ENTRY(vfp_put_double)
-	add	pc, pc, r2, lsl #3
-	mov	r0, r0
+	tbl_branch r2, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmdrr	d\dr, r0, r1
+1:	fmdrr	d\dr, r0, r1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 ENDPROC(vfp_put_double)
-- 
cgit v1.2.3


From 0e056f20f18d0efa5da920f3cf8532adc56d5779 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:58 +0100
Subject: Thumb-2: Implement the unified boot code

This patch adds the ARM/Thumb-2 unified support for the
arch/arm/boot/* files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 167 ++++++++++++++++++++++++----------------
 1 file changed, 99 insertions(+), 68 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 82f5fcfd956..bd60e836987 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,7 +140,8 @@ start:
 		tst	r2, #3			@ not user?
 		bne	not_angel
 		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
-		swi	0x123456		@ angel_SWI_ARM
+ ARM(		swi	0x123456	)	@ angel_SWI_ARM
+ THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
 		mrs	r2, cpsr		@ turn off interrupts to
 		orr	r2, r2, #0xc0		@ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
 
 		.text
 		adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated:	mov	r0, #0
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		add	r1, r5, r0		@ end of decompressed kernel
 		adr	r2, reloc_start
 		ldr	r3, LC1
 		add	r3, r2, r3
-1:		ldmia	r2!, {r9 - r14}		@ copy relocation code
-		stmia	r1!, {r9 - r14}
-		ldmia	r2!, {r9 - r14}
-		stmia	r1!, {r9 - r14}
+1:		ldmia	r2!, {r9 - r12, r14}	@ copy relocation code
+		stmia	r1!, {r9 - r12, r14}
+		ldmia	r2!, {r9 - r12, r14}
+		stmia	r1!, {r9 - r12, r14}
 		cmp	r2, r3
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 
 		bl	cache_clean_flush
-		add	pc, r5, r0		@ call relocation code
+ ARM(		add	pc, r5, r0		) @ call relocation code
+ THUMB(		add	r12, r5, r0		)
+ THUMB(		mov	pc, r12			) @ call relocation code
 
 /*
  * We're not in danger of overwriting ourselves.  Do this the simple way.
@@ -499,6 +505,7 @@ __arm6_mmu_cache_on:
 		mov	pc, r12
 
 __common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
 		orr	r0, r0, #0x000d		@ Write buffer, mmu
 #endif
@@ -510,6 +517,7 @@ __common_mmu_cache_on:
 1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
+#endif
 
 /*
  * All code following this line is relocatable.  It is relocated by
@@ -523,7 +531,7 @@ __common_mmu_cache_on:
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		.align	5
 reloc_start:	add	r9, r5, r0
@@ -532,13 +540,14 @@ reloc_start:	add	r9, r5, r0
 		mov	r1, r4
 1:
 		.rept	4
-		ldmia	r5!, {r0, r2, r3, r10 - r14}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r10 - r14}
+		ldmia	r5!, {r0, r2, r3, r10 - r12, r14}	@ relocate kernel
+		stmia	r1!, {r0, r2, r3, r10 - r12, r14}
 		.endr
 
 		cmp	r5, r9
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 		debug_reloc_end
 
 call_kernel:	bl	cache_clean_flush
@@ -572,7 +581,9 @@ call_cache_fn:	adr	r12, proc_types
 		ldr	r2, [r12, #4]		@ get mask
 		eor	r1, r1, r6		@ (real ^ match)
 		tst	r1, r2			@       & mask
-		addeq	pc, r12, r3		@ call cache function
+ ARM(		addeq	pc, r12, r3		) @ call cache function
+ THUMB(		addeq	r12, r3			)
+ THUMB(		moveq	pc, r12			) @ call cache function
 		add	r12, r12, #4*5
 		b	1b
 
@@ -595,9 +606,10 @@ call_cache_fn:	adr	r12, proc_types
 proc_types:
 		.word	0x41560600		@ ARM6/610
 		.word	0xffffffe0
-		b	__arm6_mmu_cache_off	@ works, but slow
-		b	__arm6_mmu_cache_off
+		W(b)	__arm6_mmu_cache_off	@ works, but slow
+		W(b)	__arm6_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 @		b	__arm6_mmu_cache_on		@ untested
 @		b	__arm6_mmu_cache_off
 @		b	__armv3_mmu_cache_flush
@@ -605,76 +617,84 @@ proc_types:
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		b	__arm7_mmu_cache_off
-		b	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41807200		@ ARM720T (writethrough)
 		.word	0xffffff00
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007400		@ ARM74x
 		.word	0xff00ff00
-		b	__armv3_mpu_cache_on
-		b	__armv3_mpu_cache_off
-		b	__armv3_mpu_cache_flush
+		W(b)	__armv3_mpu_cache_on
+		W(b)	__armv3_mpu_cache_off
+		W(b)	__armv3_mpu_cache_flush
 		
 		.word	0x41009400		@ ARM94x
 		.word	0xff00ff00
-		b	__armv4_mpu_cache_on
-		b	__armv4_mpu_cache_off
-		b	__armv4_mpu_cache_flush
+		W(b)	__armv4_mpu_cache_on
+		W(b)	__armv4_mpu_cache_off
+		W(b)	__armv4_mpu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		@ Everything from here on will be the new ID system.
 
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x6901b110		@ sa1110
 		.word	0xfffffff0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56158000		@ PXA168
 		.word	0xfffff000
-		b __armv4_mmu_cache_on
-		b __armv4_mmu_cache_off
-		b __armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
 		/* this conflicts with the standard ARMv5TE entry */
@@ -687,47 +707,50 @@ proc_types:
 
 		.word	0x66015261		@ FA526
 		.word	0xff01fff1
-		b	__fa526_cache_on
-		b	__armv4_mmu_cache_off
-		b	__fa526_cache_flush
+		W(b)	__fa526_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__fa526_cache_flush
 
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00060000		@ ARMv5TEJ
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv6_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
 
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
-		b	__armv7_mmu_cache_on
-		b	__armv7_mmu_cache_off
-		b	__armv7_mmu_cache_flush
+		W(b)	__armv7_mmu_cache_on
+		W(b)	__armv7_mmu_cache_off
+		W(b)	__armv7_mmu_cache_flush
 
 		.word	0			@ unrecognised type
 		.word	0
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.size	proc_types, . - proc_types
 
@@ -854,7 +877,7 @@ __armv7_mmu_cache_flush:
 		b	iflush
 hierarchical:
 		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r5, r7, r9, r11}
+		stmfd	sp!, {r0-r7, r9-r11}
 		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
 		ands	r3, r0, #0x7000000	@ extract loc from clidr
 		mov	r3, r3, lsr #23		@ left align loc bit field
@@ -879,8 +902,12 @@ loop1:
 loop2:
 		mov	r9, r4			@ create working copy of max way size
 loop3:
-		orr	r11, r10, r9, lsl r5	@ factor way and cache number into r11
-		orr	r11, r11, r7, lsl r2	@ factor index number into r11
+ ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
+ ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
+ THUMB(		lsl	r6, r9, r5		)
+ THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
+ THUMB(		lsl	r6, r7, r2		)
+ THUMB(		orr	r11, r11, r6		) @ factor index number into r11
 		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
 		subs	r9, r9, #1		@ decrement the way
 		bge	loop3
@@ -891,7 +918,7 @@ skip:
 		cmp	r3, r10
 		bgt	loop1
 finished:
-		ldmfd	sp!, {r0-r5, r7, r9, r11}
+		ldmfd	sp!, {r0-r7, r9-r11}
 		mov	r10, #0			@ swith back to cache level 0
 		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
 iflush:
@@ -925,9 +952,13 @@ __armv4_mmu_cache_flush:
 		mov	r11, #8
 		mov	r11, r11, lsl r3	@ cache line size in bytes
 no_cache_id:
-		bic	r1, pc, #63		@ align to longest cache line
+		mov	r1, pc
+		bic	r1, r1, #63		@ align to longest cache line
 		add	r2, r1, r2
-1:		ldr	r3, [r1], r11		@ s/w flush D cache
+1:
+ ARM(		ldr	r3, [r1], r11		) @ s/w flush D cache
+ THUMB(		ldr     r3, [r1]		) @ s/w flush D cache
+ THUMB(		add     r1, r1, r11		)
 		teq	r1, r2
 		bne	1b
 
-- 
cgit v1.2.3


From adca6dc23bc620ea95392659625200a252b97be3 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:59 +0100
Subject: Thumb-2: Add support for loadable modules

Modules compiled to Thumb-2 have two additional relocations needing to
be resolved at load time, R_ARM_THM_CALL and R_ARM_THM_JUMP24, for BL
and B.W instructions. The maximum Thumb-2 addressing range is +/-2^24
(+/-16MB) therefore the MODULES_VADDR macro in asm/memory.h is set to
(MODULES_END - 8MB) for the Thumb-2 compiled kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/elf.h    |  3 +++
 arch/arm/include/asm/memory.h |  6 +++++
 arch/arm/kernel/module.c      | 53 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 62 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c207504de84..c3b911ee915 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVW_ABS_NC	43
 #define R_ARM_MOVT_ABS		44
 
+#define R_ARM_THM_CALL		10
+#define R_ARM_THM_JUMP24	30
+
 /*
  * These are used to set parameters in the core dumps.
  */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..376be1a6286 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,7 +44,13 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
+#ifndef CONFIG_THUMB2_KERNEL
 #define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR		(PAGE_OFFSET - 8*1024*1024)
+#endif
+
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index bac03c81489..f28c5e9c51e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		s32 offset;
+		u32 upper, lower, sign, j1, j2;
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 					(offset & 0x0fff);
 			break;
 
+		case R_ARM_THM_CALL:
+		case R_ARM_THM_JUMP24:
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+
+			/*
+			 * 25 bit signed address range (Thumb-2 BL and B.W
+			 * instructions):
+			 *   S:I1:I2:imm10:imm11:0
+			 * where:
+			 *   S     = upper[10]   = offset[24]
+			 *   I1    = ~(J1 ^ S)   = offset[23]
+			 *   I2    = ~(J2 ^ S)   = offset[22]
+			 *   imm10 = upper[9:0]  = offset[21:12]
+			 *   imm11 = lower[10:0] = offset[11:1]
+			 *   J1    = lower[13]
+			 *   J2    = lower[11]
+			 */
+			sign = (upper >> 10) & 1;
+			j1 = (lower >> 13) & 1;
+			j2 = (lower >> 11) & 1;
+			offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+				((~(j2 ^ sign) & 1) << 22) |
+				((upper & 0x03ff) << 12) |
+				((lower & 0x07ff) << 1);
+			if (offset & 0x01000000)
+				offset -= 0x02000000;
+			offset += sym->st_value - loc;
+
+			/* only Thumb addresses allowed (no interworking) */
+			if (!(offset & 1) ||
+			    offset <= (s32)0xff000000 ||
+			    offset >= (s32)0x01000000) {
+				printk(KERN_ERR
+				       "%s: relocation out of range, section "
+				       "%d reloc %d sym '%s'\n", module->name,
+				       relindex, i, strtab + sym->st_name);
+				return -ENOEXEC;
+			}
+
+			sign = (offset >> 24) & 1;
+			j1 = sign ^ (~(offset >> 23) & 1);
+			j2 = sign ^ (~(offset >> 22) & 1);
+			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+					    ((offset >> 12) & 0x03ff));
+			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+						  (j1 << 13) | (j2 << 11) |
+						  ((offset >> 1) & 0x07ff));
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
-- 
cgit v1.2.3


From dff2ab16ac53d2e21c1ee5ec72f446d5740d8ca2 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:00 +0100
Subject: Thumb-2: Pass a Thumb-2 address to the secondary CPUs to jump to

This patch sets bit 0 in the startup address passed to the secondary
CPUs so that they branch into Thumb-2 mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/platsmp.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f1cc3..a88458b4799 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/localtimer.h>
+#include <asm/unified.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init poke_milo(void)
 {
-	extern void secondary_startup(void);
-
 	/* nobody is to be released from the pen yet */
 	pen_release = -1;
 
 	/*
-	 * write the address of secondary startup into the system-wide
-	 * flags register, then clear the bottom two bits, which is what
-	 * BootMonitor is waiting for
+	 * Write the address of secondary startup into the system-wide flags
+	 * register. The BootMonitor waits for this register to become
+	 * non-zero.
 	 */
-#if 1
 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-	__raw_writel(virt_to_phys(realview_secondary_startup),
-		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSS_OFFSET);
 #define REALVIEW_SYS_FLAGSC_OFFSET 0x34
-	__raw_writel(3,
+	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
 		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
+		     REALVIEW_SYS_FLAGSS_OFFSET);
 
 	mb();
 }
-- 
cgit v1.2.3


From e2ed3be7319f2734fcd9c7638888501934c22751 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:01 +0100
Subject: Thumb-2: Make the uImage entry an odd number

This allows U-Boot to branch to the kernel in Thumb-2 mode via
"mov pc, lr".

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/Makefile | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index da226abce2d..4a590f4113e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,7 +61,7 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(LOADADDR) -e $(LOADADDR) \
+		   -C none -a $(LOADADDR) -e $(STARTADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'
-- 
cgit v1.2.3


From 16c79651a5ee1ad7e4fca65a7c5309dfca89ed28 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:02 +0100
Subject: Thumb-2: Add Thumb-2 support to the build files

This patch adds the necessary entries to the Makefile and Kconfig
files for building the Thumb-2 kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig       | 12 ++++++++++++
 arch/arm/Kconfig.debug |  1 +
 arch/arm/Makefile      | 11 +++++++++--
 3 files changed, 22 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index da28e7ba608..a36b5a8b123 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,18 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config THUMB2_KERNEL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && EXPERIMENTAL
+	select AEABI
+	select ARM_ASM_UNIFIED
+	help
+	  By enabling this option, the kernel will be compiled in
+	  Thumb-2 mode. A compiler/assembler that understand the unified
+	  ARM-Thumb syntax is needed.
+
+	  If unsure, say N.
+
 config ARM_ASM_UNIFIED
 	bool
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a89e4734b8f..1a6f70e5292 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
+	depends on !THUMB2_KERNEL
 	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3505572a21e..e150f232458 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
-- 
cgit v1.2.3


From 09529f7a1a010cc364267fc5895a71c3853eb82c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:55 +0100
Subject: nommu: Fix the fault processing for the MMU-less case

The patch adds the necessary ifdefs around functions that only make
sense when the MMU is enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..ee01ccae3f5 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -23,6 +23,7 @@
 
 #include "fault.h"
 
+#ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
@@ -97,6 +98,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
 	printk("\n");
 }
+#else					/* CONFIG_MMU */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{ }
+#endif					/* CONFIG_MMU */
 
 /*
  * Oops.  The kernel tried to access some page that wasn't present.
@@ -171,6 +176,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		__do_kernel_fault(mm, addr, fsr, regs);
 }
 
+#ifdef CONFIG_MMU
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
@@ -322,6 +328,13 @@ no_context:
 	__do_kernel_fault(mm, addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * First Level Translation Fault Handler
@@ -340,6 +353,7 @@ no_context:
  * interrupt or a critical region, and should only copy the information
  * from the master page table, nothing more.
  */
+#ifdef CONFIG_MMU
 static int __kprobes
 do_translation_fault(unsigned long addr, unsigned int fsr,
 		     struct pt_regs *regs)
@@ -378,6 +392,14 @@ bad_area:
 	do_bad_area(addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+		     struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * Some section permission faults need to be handled gracefully.
-- 
cgit v1.2.3


From 9a45f026bb3ba720765d46f62f5c464d3317a8ab Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:56 +0100
Subject: nommu: Remove the context.id from asm-offsets.c when !MMU

There is no MMU context switching on MMU-less systems.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/mmu_context.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 263fed05ea3..bcdb9291ef0 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm)
 
 static inline void check_context(struct mm_struct *mm)
 {
+#ifdef CONFIG_MMU
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
+#endif
 }
 
 #define init_new_context(tsk,mm)	0
-- 
cgit v1.2.3


From 365f7a43497dfdfdc05ca03896a8e22ee6944179 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: nommu: Add MMU-less support for Integrator platforms

This patch redefines the IO_ADDRESS macro in
include/asm-arm/hardware.h.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-integrator/include/mach/hardware.h |  4 ++++
 arch/arm/mach-integrator/integrator_cp.c         | 16 ++++++++--------
 2 files changed, 12 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 1251319ef9a..d795642fad2 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -36,8 +36,12 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
+#ifdef CONFIG_MMU
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+#else
+#define IO_ADDRESS(x) (x)
+#endif
 
 #define pcibios_assign_all_busses()	1
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..452931b2690 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -49,14 +49,14 @@
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		0xf1000040
-#define INTCP_VA_PIC_BASE		0xf1400000
-#define INTCP_VA_SIC_BASE		0xfca00000
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
 
 #define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		0xfcb00000
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfca00000,
+		.virtual	= IO_ADDRESS(0xca000000),
 		.pfn		= __phys_to_pfn(0xca000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfcb00000,
+		.virtual	= IO_ADDRESS(0xcb000000),
 		.pfn		= __phys_to_pfn(0xcb000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
@@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(0xfca00004);
-	writel(8, 0xfcb00008);
+	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+	writel(8, IO_ADDRESS(0xcb000000) + 8);
 
 	return status & 8;
 }
-- 
cgit v1.2.3


From 5d57795e26c413656725c26bd053dbee3711adee Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: nommu: Add MMU-less support for the RealView boards

This patch defines the IO_ADDRESS macro for the !CONFIG_MMU case.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/include/mach/hardware.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f89ac..8a638d15797 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
 /*
  * Statically mapped addresses:
  *
@@ -33,6 +34,9 @@
  * 1fxx xxxx -> fexx xxxx
  */
 #define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x)		(x)
+#endif
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif
-- 
cgit v1.2.3


From 68b7f7153fa58df710924fbb79722717d2d16094 Mon Sep 17 00:00:00 2001
From: Paul Brook <paul@codesourcery.com>
Date: Fri, 24 Jul 2009 12:34:58 +0100
Subject: nommu: ptrace support

The patch below adds ARM ptrace functions to get the process load address.
This is required for useful userspace debugging on mmuless systems.  These
values are obtained by reading magic offsets with PTRACE_PEEKUSR, as on other
nommu targets. I picked arbitrary large values for the offsets.

Signed-off-by: Paul Brook <paul@codesourcery.com>
---
 arch/arm/include/asm/ptrace.h | 8 ++++++++
 arch/arm/kernel/ptrace.c      | 8 +++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 67b833c9b6b..bbecccda76d 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -82,6 +82,14 @@
 #define PSR_ENDSTATE	0
 #endif
 
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 89882a1d018..a2ea3854cb3 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		return -EIO;
 
 	tmp = 0;
-	if (off < sizeof(struct pt_regs))
+	if (off == PT_TEXT_ADDR)
+		tmp = tsk->mm->start_code;
+	else if (off == PT_DATA_ADDR)
+		tmp = tsk->mm->start_data;
+	else if (off == PT_TEXT_END_ADDR)
+		tmp = tsk->mm->end_code;
+	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
 
 	return put_user(tmp, ret);
-- 
cgit v1.2.3


From 05efde9d04ccc1d66a9d2225527c6ee638baa385 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:59 +0100
Subject: nommu: Do not override the CP15 control reg value returned from
 initfunc

The patch removes the "mrc" instruction in head-nommu.S overriding the
r0 register containing the value to be written in the CP15 system
control register.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/kernel/head-nommu.S | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index b16393d2b71..e5dfc2895e2 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -61,7 +61,10 @@ ENDPROC(stext)
  */
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
-	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
+	/*
+	 * CP15 system control register value returned in r0 from
+	 * the CPU init function.
+	 */
 #ifdef CONFIG_ALIGNMENT_TRAP
 	orr	r0, r0, #CR_A
 #else
-- 
cgit v1.2.3


From 3c4279750c7d3f88a0638a44e257d7d8d10732f2 Mon Sep 17 00:00:00 2001
From: "Hyok S. Choi" <hyok.choi@samsung.com>
Date: Fri, 24 Jul 2009 12:35:00 +0100
Subject: nommu: Enables to select noMMU mode

MMU option is now selectable.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
---
 arch/arm/Kconfig | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a36b5a8b123..dc70660fe6b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
-config MMU
-	bool
-	default y
-
 config NO_IOPORT
 	bool
 
@@ -188,6 +184,13 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type"
 
+config MMU
+	bool "MMU-based Paged Memory Management Support"
+	default y
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
+
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
-- 
cgit v1.2.3


From 2732f4b6f11689fa08e2db5689fc652d608936b5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:01 +0100
Subject: nommu: Remove the memory_start/end variables from ARM page-nommu.h

These variables do not seem to be used anywhere in the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/page-nommu.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index 3574c0deb37..d1b162a18dc 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -43,7 +43,4 @@ typedef unsigned long pgprot_t;
 #define __pmd(x)        (x)
 #define __pgprot(x)     (x)
 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
 #endif
-- 
cgit v1.2.3


From ab6494f0c96f8953c7ad3e35301b2de2db3add57 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:02 +0100
Subject: nommu: Add noMMU support to the DMA API

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/dma-mapping.c | 94 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 72 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 510c179b0ac..b30925fcbcd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -36,7 +36,34 @@
 #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
 #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
 
+static u64 get_coherent_dma_mask(struct device *dev)
+{
+	u64 mask = ISA_DMA_THRESHOLD;
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			return 0;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			return 0;
+		}
+	}
 
+	return mask;
+}
+
+#ifdef CONFIG_MMU
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -152,7 +179,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	struct page *page;
 	struct arm_vm_region *c;
 	unsigned long order;
-	u64 mask = ISA_DMA_THRESHOLD, limit;
+	u64 mask = get_coherent_dma_mask(dev);
+	u64 limit;
 
 	if (!consistent_pte[0]) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -160,25 +188,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 		return NULL;
 	}
 
-	if (dev) {
-		mask = dev->coherent_dma_mask;
-
-		/*
-		 * Sanity check the DMA mask - it must be non-zero, and
-		 * must be able to be satisfied by a DMA allocation.
-		 */
-		if (mask == 0) {
-			dev_warn(dev, "coherent DMA mask is unset\n");
-			goto no_page;
-		}
-
-		if ((~mask) & ISA_DMA_THRESHOLD) {
-			dev_warn(dev, "coherent DMA mask %#llx is smaller "
-				 "than system GFP_DMA mask %#llx\n",
-				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
-			goto no_page;
-		}
-	}
+	if (!mask)
+		goto no_page;
 
 	/*
 	 * Sanity check the allocation size.
@@ -267,6 +278,31 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	*handle = ~0;
 	return NULL;
 }
+#else	/* !CONFIG_MMU */
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+	    pgprot_t prot)
+{
+	void *virt;
+	u64 mask = get_coherent_dma_mask(dev);
+
+	if (!mask)
+		goto error;
+
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+	virt = kmalloc(size, gfp);
+	if (!virt)
+		goto error;
+
+	*handle =  virt_to_dma(dev, virt);
+	return virt;
+
+error:
+	*handle = ~0;
+	return NULL;
+}
+#endif	/* CONFIG_MMU */
 
 /*
  * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -311,9 +347,10 @@ EXPORT_SYMBOL(dma_alloc_writecombine);
 static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
+	int ret = -ENXIO;
+#ifdef CONFIG_MMU
 	unsigned long flags, user_size, kern_size;
 	struct arm_vm_region *c;
-	int ret = -ENXIO;
 
 	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
@@ -334,6 +371,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 					      vma->vm_page_prot);
 		}
 	}
+#endif	/* CONFIG_MMU */
 
 	return ret;
 }
@@ -358,6 +396,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
+#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
 	struct arm_vm_region *c;
@@ -444,6 +483,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 	       __func__, cpu_addr);
 	dump_stack();
 }
+#else	/* !CONFIG_MMU */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+	kfree(cpu_addr);
+}
+#endif	/* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
@@ -451,10 +498,12 @@ EXPORT_SYMBOL(dma_free_coherent);
  */
 static int __init consistent_init(void)
 {
+	int ret = 0;
+#ifdef CONFIG_MMU
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
-	int ret = 0, i = 0;
+	int i = 0;
 	u32 base = CONSISTENT_BASE;
 
 	do {
@@ -477,6 +526,7 @@ static int __init consistent_init(void)
 		consistent_pte[i++] = pte;
 		base += (1 << PGDIR_SHIFT);
 	} while (base < CONSISTENT_END);
+#endif	/* !CONFIG_MMU */
 
 	return ret;
 }
-- 
cgit v1.2.3


From b32f3afe3c5c4ddd1c414d41845470a99c88475f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:03 +0100
Subject: nommu: Include asm/setup.h in arch/arm/mm/nommu.c

This is needed for the struct meminfo definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/nommu.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index ad7bacc693b..900811cc913 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -12,6 +12,7 @@
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
-- 
cgit v1.2.3


From 8b79d5f217d7fc7d6b85ee5b10899f2bd20b64ed Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:04 +0100
Subject: nommu: Add #ifdef CONFIG_MMU around the PTE sanity checks

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-macros.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..f1559c22778 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -77,6 +77,7 @@
  * Sanity check the PTE configuration for the code below - which makes
  * certain assumptions about how these bits are layed out.
  */
+#ifdef CONFIG_MMU
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
@@ -90,6 +91,7 @@
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
+#endif	/* CONFIG_MMU */
 
 /*
  * The ARMv6 and ARMv7 set_pte_ext translation function.
-- 
cgit v1.2.3


From 0e0fe9219d2e5426d87a0f62db445010d4aba2c7 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:05 +0100
Subject: nommu: Do not allow REALVIEW_HIGH_PHYS_OFFSET if !MMU

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa214538..dfc9b0bc6eb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX
 
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
-	depends on !MACH_REALVIEW_PB1176
+	depends on MMU && !MACH_REALVIEW_PB1176
 	default y
 	help
 	  RealView boards other than PB1176 have the RAM available at
-- 
cgit v1.2.3


From 8bdca0ac2b1ec35091941c57b4202f7096291c5b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: nommu: Fix compressed/head.S to not perform MMU specific operations

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index bd60e836987..fa6fbf45cf3 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,7 @@ ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -451,10 +452,12 @@ __armv4_mmu_cache_on:
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
 		blne	__setup_mmu
@@ -462,9 +465,11 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
 		tst	r11, #0xf		@ VMSA
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
@@ -472,6 +477,7 @@ __armv7_mmu_cache_on:
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+#endif
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0
@@ -785,22 +791,30 @@ __armv3_mpu_cache_off:
 		mov	pc, lr
 
 __armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
 		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
+#endif
 		mov	pc, lr
 
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
 		bic	r0, r0, #0x000d
+#else
+		bic	r0, r0, #0x000c
+#endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r12, lr
 		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
+#ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
+#endif
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-- 
cgit v1.2.3


From bdaaaec39792ee0035d6c5a5ad2520991e090a3c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: nommu: Do not set PRRR and NMRR in proc-v7.S if !MMU

ARMv7-R profile CPUs do not have these registers.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-v7.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c19aecdb202..f3fa1c32fe9 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -234,7 +234,6 @@ __v7_setup:
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
-#endif
 	/*
 	 * Memory region attributes with SCTLR.TRE=1
 	 *
@@ -267,6 +266,7 @@ __v7_setup:
 	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+#endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
-- 
cgit v1.2.3


From 412bb0a6224f96661c042a109c4978649c00ed52 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:37:09 +0100
Subject: Include linux/sched.h in arch/arm/mm/fault.c

When building with !MMU, task_struct is not defined. Just include the
relevant file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ee01ccae3f5..556c8daf087 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 58cda884ecc87dcce18d463b0c8bd928dae63ad8 Mon Sep 17 00:00:00 2001
From: Jean Pihet <jpihet@mvista.com>
Date: Fri, 24 Jul 2009 19:43:25 -0600
Subject: OMAP3 SDRC: add support for 2 SDRAM chip selects

Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2
SDRAM parts connected to the SDRC.

This patch adds the following:
- add a new argument of type omap_sdrc_params struct*
to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params
- adapted the OMAP boards files to the new prototype of
omap2_init_common_hw
- add the SDRC 2nd CS registers offsets defines
- adapt the sram sleep code to configure the SDRC for the 2nd CS

Note: If the 2nd param to omap2_init_common_hw is NULL, then the
parameters are not programmed into the SDRC CS1 registers

Tested on 3430 SDP and Beagleboard rev C2 and B5, with
suspend/resume and frequency changes (cpufreq).

Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/board-2430sdp.c      |   2 +-
 arch/arm/mach-omap2/board-3430sdp.c      |   2 +-
 arch/arm/mach-omap2/board-4430sdp.c      |   2 +-
 arch/arm/mach-omap2/board-apollon.c      |   2 +-
 arch/arm/mach-omap2/board-generic.c      |   2 +-
 arch/arm/mach-omap2/board-h4.c           |   2 +-
 arch/arm/mach-omap2/board-ldp.c          |   2 +-
 arch/arm/mach-omap2/board-omap3beagle.c  |   3 +-
 arch/arm/mach-omap2/board-omap3evm.c     |   2 +-
 arch/arm/mach-omap2/board-omap3pandora.c |   3 +-
 arch/arm/mach-omap2/board-overo.c        |   3 +-
 arch/arm/mach-omap2/board-rx51.c         |   2 +-
 arch/arm/mach-omap2/board-zoom2.c        |   2 +-
 arch/arm/mach-omap2/clock34xx.c          |  37 +++++++--
 arch/arm/mach-omap2/io.c                 |   5 +-
 arch/arm/mach-omap2/sdrc.c               |  63 +++++++++-----
 arch/arm/mach-omap2/sram34xx.S           | 137 ++++++++++++++++++++++++-------
 arch/arm/plat-omap/include/mach/io.h     |   3 +-
 arch/arm/plat-omap/include/mach/sdrc.h   |  11 ++-
 arch/arm/plat-omap/include/mach/sram.h   |  23 +++---
 arch/arm/plat-omap/sram.c                |  30 ++++---
 21 files changed, 236 insertions(+), 102 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 9c3fdcdf76c..8ec2a132904 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -141,7 +141,7 @@ static inline void board_smc91x_init(void)
 
 static void __init omap_2430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 496a90e4ea7..ac262cd7450 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477bd89c..b0c7402248f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -59,7 +59,7 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
 #endif
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 06dfba888b0..dcfc20d0389 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -250,7 +250,7 @@ out:
 
 static void __init omap_apollon_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	apollon_init_smc91x();
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3492162a65c..fd00aa03690 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index e7d017cdc43..7b1d61d5bb2 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -270,7 +270,7 @@ static void __init h4_init_flash(void)
 
 static void __init omap_h4_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	h4_init_flash();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d8bc0a7dcb8..ea383f88cb1 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void)
 
 static void __init omap_ldp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	ldp_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 991ac9c3803..4abefd9566e 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d3cc145814d..217e5a2861d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -279,7 +279,7 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 
 static void __init omap3_evm_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index e32aa23ce96..9b991ced382 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -310,7 +310,8 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528fbfb..44bc1c54cd0 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -360,7 +360,8 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 374ff63c3eb..591ae8a5805 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index bcc0f7632de..427b7b8b123 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -25,7 +25,7 @@
 
 static void __init omap_zoom2_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 045da923e75..1c6480d3ad6 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -725,7 +725,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	u32 unlock_dll = 0;
 	u32 c;
 	unsigned long validrate, sdrcrate, mpurate;
-	struct omap_sdrc_params *sp;
+	struct omap_sdrc_params *sdrc_cs0;
+	struct omap_sdrc_params *sdrc_cs1;
+	int ret;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -743,8 +745,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	else
 		sdrcrate >>= ((clk->rate / rate) >> 1);
 
-	sp = omap2_sdrc_get_params(sdrcrate);
-	if (!sp)
+	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+	if (ret)
 		return -EINVAL;
 
 	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
@@ -765,12 +767,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 
 	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
 		 validrate);
-	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
-		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
-
-	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div, unlock_dll, c,
-				  sp->mr, rate > clk->rate);
+	pr_debug("clock: SDRC CS0 timing params used:"
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+	if (sdrc_cs1)
+		pr_debug("clock: SDRC CS1 timing params used: "
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+	if (sdrc_cs1)
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+	else
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  0, 0, 0, 0);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3a86b0f6603..e9b9bcb19b4 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void)
 	return v;
 }
 
-void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+				 struct omap_sdrc_params *sdrc_cs1)
 {
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-	omap2_sdrc_init(sp);
+	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
 #endif
 	gpmc_init();
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2045441e838..2e9e38db30e 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -32,7 +32,7 @@
 #include <mach/sdrc.h>
 #include "sdrc.h"
 
-static struct omap_sdrc_params *sdrc_init_params;
+static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
 
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
@@ -45,33 +45,49 @@ void __iomem *omap2_sms_base;
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
  * @r: SDRC clock rate (in Hz)
+ * @sdrc_cs0: chip select 0 ram timings **
+ * @sdrc_cs1: chip select 1 ram timings **
  *
  * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
- * SDRC clock rate 'r'.  These parameters control various timing
- * delays in the SDRAM controller that are expressed in terms of the
- * number of SDRC clock cycles to wait; hence the clock rate
- * dependency. Note that sdrc_init_params must be sorted rate
- * descending.  Also assumes that both chip-selects use the same
- * timing parameters.  Returns a struct omap_sdrc_params * upon
- * success, or NULL upon failure.
+ *  SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
+ *  structs,for a given SDRC clock rate 'r'.
+ * These parameters control various timing delays in the SDRAM controller
+ *  that are expressed in terms of the number of SDRC clock cycles to
+ *  wait; hence the clock rate dependency.
+ *
+ * Supports 2 different timing parameters for both chip selects.
+ *
+ * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
+ * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
+ *  as sdrc_init_params_cs_0.
+ *
+ * Fills in the struct omap_sdrc_params * for each chip select.
+ * Returns 0 upon success or -1 upon failure.
  */
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+int omap2_sdrc_get_params(unsigned long r,
+			  struct omap_sdrc_params **sdrc_cs0,
+			  struct omap_sdrc_params **sdrc_cs1)
 {
-	struct omap_sdrc_params *sp;
+	struct omap_sdrc_params *sp0, *sp1;
 
-	if (!sdrc_init_params)
-		return NULL;
+	if (!sdrc_init_params_cs0)
+		return -1;
 
-	sp = sdrc_init_params;
+	sp0 = sdrc_init_params_cs0;
+	sp1 = sdrc_init_params_cs1;
 
-	while (sp->rate && sp->rate != r)
-		sp++;
+	while (sp0->rate && sp0->rate != r) {
+		sp0++;
+		if (sdrc_init_params_cs1)
+			sp1++;
+	}
 
-	if (!sp->rate)
-		return NULL;
+	if (!sp0->rate)
+		return -1;
 
-	return sp;
+	*sdrc_cs0 = sp0;
+	*sdrc_cs1 = sp1;
+	return 0;
 }
 
 
@@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 
 /**
  * omap2_sdrc_init - initialize SMS, SDRC devices on boot
- * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
+ *  Support for 2 chip selects timings
  *
  * Turn on smart idle modes for SDRAM scheduler and controller.
  * Program a known-good configuration for the SDRC to deal with buggy
  * bootloaders.
  */
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+			    struct omap_sdrc_params *sdrc_cs1)
 {
 	u32 l;
 
@@ -103,7 +121,8 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	l |= (0x2 << 3);
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
-	sdrc_init_params = sp;
+	sdrc_init_params_cs0 = sdrc_cs0;
+	sdrc_init_params_cs1 = sdrc_cs1;
 
 	/* XXX Enable SRFRONIDLEREQ here also? */
 	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index f41f8d96ddb..3aef7448b2a 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -36,7 +36,7 @@
 
 	.text
 
-/* r4 parameters */
+/* r1 parameters */
 #define SDRC_NO_UNLOCK_DLL		0x0
 #define SDRC_UNLOCK_DLL			0x1
 
@@ -71,40 +71,71 @@
 
 /*
  * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- * r0 = new SDRC_RFR_CTRL register contents
- * r1 = new SDRC_ACTIM_CTRLA register contents
- * r2 = new SDRC_ACTIM_CTRLB register contents
- * r3 = new M2 divider setting (only 1 and 2 supported right now)
- * r4 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
+ *
+ * Params passed in registers:
+ *  r0 = new M2 divider setting (only 1 and 2 supported right now)
+ *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
  *      SDRC rates < 83MHz
- * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ *  r2 = number of MPU cycles to wait for SDRC to stabilize after
  *      reprogramming the SDRC when switching to a slower MPU speed
- * r6 = new SDRC_MR_0 register value
- * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
+ * Params passed via the stack. The needed params will be copied in SRAM
+ *  before use by the code in SRAM (SDRAM is not accessible during SDRC
+ *  reconfiguration):
+ *  new SDRC_RFR_CTRL_0 register contents
+ *  new SDRC_ACTIM_CTRL_A_0 register contents
+ *  new SDRC_ACTIM_CTRL_B_0 register contents
+ *  new SDRC_MR_0 register value
+ *  new SDRC_RFR_CTRL_1 register contents
+ *  new SDRC_ACTIM_CTRL_A_1 register contents
+ *  new SDRC_ACTIM_CTRL_B_1 register contents
+ *  new SDRC_MR_1 register value
  *
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters
+ *  are not programmed into the SDRC CS1 registers
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
-	ldr	r4, [sp, #52]		@ pull extra args off the stack
-	ldr	r5, [sp, #56]		@ load extra args from the stack
-	ldr	r6, [sp, #60]		@ load extra args from the stack
-	ldr	r7, [sp, #64]		@ load extra args from the stack
+
+					@ pull the extra args off the stack
+					@  and store them in SRAM
+	ldr	r4, [sp, #52]
+	str     r4, omap_sdrc_rfr_ctrl_0_val
+	ldr	r4, [sp, #56]
+	str     r4, omap_sdrc_actim_ctrl_a_0_val
+	ldr	r4, [sp, #60]
+	str     r4, omap_sdrc_actim_ctrl_b_0_val
+	ldr	r4, [sp, #64]
+	str     r4, omap_sdrc_mr_0_val
+	ldr	r4, [sp, #68]
+	str     r4, omap_sdrc_rfr_ctrl_1_val
+	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
+	beq	skip_cs1_params		@  do not use cs1 params
+	ldr	r4, [sp, #72]
+	str     r4, omap_sdrc_actim_ctrl_a_1_val
+	ldr	r4, [sp, #76]
+	str     r4, omap_sdrc_actim_ctrl_b_1_val
+	ldr	r4, [sp, #80]
+	str     r4, omap_sdrc_mr_1_val
+skip_cs1_params:
 	dsb				@ flush buffered writes to interconnect
-	cmp	r7, #1			@ if increasing SDRC clk rate,
+
+	cmp	r3, #1			@ if increasing SDRC clk rate,
 	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r4, #SDRC_UNLOCK_DLL	@ set the intended DLL state
+	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
 	bleq	unlock_dll
 	blne	lock_dll
 	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
 	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
 	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r4, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
+	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
 	bleq	wait_dll_unlock
 	blne	wait_dll_lock
-	cmp	r7, #1			@ if increasing SDRC clk rate,
+	cmp	r3, #1			@ if increasing SDRC clk rate,
 	beq	return_to_sdram		@ return to SDRAM code, otherwise,
 	bl	configure_sdrc		@ reprogram SDRC regs now
-	mov	r12, r5
+	mov	r12, r2
 	bl	wait_clk_stable		@ wait for SDRC to stabilize
 return_to_sdram:
 	isb				@ prevent speculative exec past here
@@ -149,7 +180,7 @@ configure_core_dpll:
 	ldr	r12, [r11]
 	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
 	and	r12, r12, r10
-	orr	r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
+	orr	r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
 	str	r12, [r11]
 	ldr	r12, [r11]		@ posted-write barrier for CM
 	bx	lr
@@ -187,15 +218,34 @@ wait_dll_unlock:
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r11, omap3_sdrc_rfr_ctrl
-	str	r0, [r11]
-	ldr	r11, omap3_sdrc_actim_ctrla
-	str	r1, [r11]
-	ldr	r11, omap3_sdrc_actim_ctrlb
-	str	r2, [r11]
+	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
+	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
+	str	r12, [r11]			@ store
+	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
+	ldr	r11, omap3_sdrc_actim_ctrl_a_0
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_b_0_val
+	ldr	r11, omap3_sdrc_actim_ctrl_b_0
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_mr_0_val
 	ldr	r11, omap3_sdrc_mr_0
-	str	r6, [r11]
-	ldr	r6, [r11]		@ posted-write barrier for SDRC
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_rfr_ctrl_1_val
+	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
+	beq	skip_cs1_prog		@  do not program cs1 params
+	ldr	r11, omap3_sdrc_rfr_ctrl_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
+	ldr	r11, omap3_sdrc_actim_ctrl_a_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_b_1_val
+	ldr	r11, omap3_sdrc_actim_ctrl_b_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_mr_1_val
+	ldr	r11, omap3_sdrc_mr_1
+	str	r12, [r11]
+skip_cs1_prog:
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
@@ -206,14 +256,40 @@ omap3_cm_idlest1_core:
 	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
 omap3_cm_iclken1_core:
 	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+
+omap3_sdrc_rfr_ctrl_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrl_a_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrl_a_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrl_b_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrl_b_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
 omap3_sdrc_mr_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
+omap_sdrc_rfr_ctrl_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_rfr_ctrl_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_mr_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_mr_1_val:
+	.word 0xDEADBEEF
+
 omap3_sdrc_dlla_status:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 omap3_sdrc_dlla_ctrl:
@@ -223,3 +299,4 @@ core_m2_mask_val:
 
 ENTRY(omap3_sram_configure_core_dpll_sz)
 	.word	. - omap3_sram_configure_core_dpll
+
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 73f483d56ca..21fb0efdda8 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -228,7 +228,8 @@ extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
 extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+				 struct omap_sdrc_params *sdrc_cs1);
 
 #define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
 #define __arch_iounmap(v)	omap_iounmap(v)
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index adc73522491..0be18e4ff18 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -30,6 +30,10 @@
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MR_1		0x0B4
+#define SDRC_ACTIM_CTRL_A_1	0x0C4
+#define SDRC_ACTIM_CTRL_B_1	0x0C8
+#define SDRC_RFR_CTRL_1		0x0D4
 
 /*
  * These values represent the number of memory clock cycles between
@@ -102,8 +106,11 @@ struct omap_sdrc_params {
 	u32 mr;
 };
 
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+			    struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+			  struct omap_sdrc_params **sdrc_cs0,
+			  struct omap_sdrc_params **sdrc_cs1);
 
 #ifdef CONFIG_ARCH_OMAP2
 
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
index 4d53cc59d7a..8974e3fc269 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
-extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
-				     u32 sdrc_actim_ctrla,
-				     u32 sdrc_actim_ctrlb, u32 m2,
-				     u32 unlock_dll, u32 f, u32 sdrc_mr,
-				     u32 inc);
+extern u32 omap3_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
-
-extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
-					  u32 sdrc_actim_ctrla,
-					  u32 sdrc_actim_ctrlb, u32 m2,
-					  u32 unlock_dll, u32 f, u32 sdrc_mr,
-					  u32 inc);
+extern u32 omap3_sram_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 4ea73804d21..4e781c99f0e 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -373,20 +373,26 @@ static inline int omap243x_sram_init(void)
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
-					      u32 sdrc_actim_ctrla,
-					      u32 sdrc_actim_ctrlb,
-					      u32 m2, u32 unlock_dll,
-					      u32 f, u32 sdrc_mr, u32 inc);
-u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
-			      u32 f, u32 sdrc_mr, u32 inc)
+static u32 (*_omap3_sram_configure_core_dpll)(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
 {
 	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
-					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2,
-					       unlock_dll, f, sdrc_mr, inc);
+	return _omap3_sram_configure_core_dpll(
+			m2, unlock_dll, f, inc,
+			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+			sdrc_actim_ctrl_b_0, sdrc_mr_0,
+			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
-- 
cgit v1.2.3


From 9fb97412c3be5d0d1dd0e9d7c5268469e4c942aa Mon Sep 17 00:00:00 2001
From: Jean Pihet <jpihet@mvista.com>
Date: Fri, 24 Jul 2009 19:43:25 -0600
Subject: OMAP3: Setup MUX settings for SDRC CKE signals

This patches ensures the MUX settings are correct for the SDRC
CKE signals to SDRAM. This allows the self-refresh to work when
2 chip-selects are in use.

A warning is thrown away in case the initial muxing is incorrect,
in order to track faulty or old-dated bootloaders.
Note: The CONFIG_OMAP_MUX and CONFIG_OMAP_MUX_WARNINGS options
must be enabled for the mux code to have effect.

Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c  | 4 ++++
 arch/arm/mach-omap2/board-omap3pandora.c | 5 +++++
 arch/arm/mach-omap2/board-overo.c        | 5 +++++
 arch/arm/mach-omap2/board-rx51.c         | 4 ++++
 arch/arm/mach-omap2/mux.c                | 6 ++++++
 arch/arm/plat-omap/include/mach/mux.h    | 4 ++++
 6 files changed, 28 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4abefd9566e..e00ba128cec 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -409,6 +409,10 @@ static void __init omap3_beagle_init(void)
 
 	usb_musb_init();
 	omap3beagle_flash_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init omap3_beagle_map_io(void)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 9b991ced382..864ee3d021f 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -40,6 +40,7 @@
 #include <mach/mcspi.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
+#include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -398,6 +399,10 @@ static void __init omap3pandora_init(void)
 	omap3pandora_ads7846_init();
 	pandora_keys_gpio_init();
 	usb_musb_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init omap3pandora_map_io(void)
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 44bc1c54cd0..6b171b338ec 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -44,6 +44,7 @@
 #include <mach/gpmc.h>
 #include <mach/hardware.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 #include <mach/usb.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -396,6 +397,10 @@ static void __init overo_init(void)
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
 	    (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 591ae8a5805..1c9e07fe826 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -75,6 +75,10 @@ static void __init rx51_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init rx51_map_io(void)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 026c4fc883a..43d6b92b65f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+
+/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 85a62170576..80281c458ba 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -853,6 +853,10 @@ enum omap34xx_index {
 	AE5_34XX_GPIO143,
 	H19_34XX_GPIO164_OUT,
 	J25_34XX_GPIO170,
+
+	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+	H16_34XX_SDRC_CKE0,
+	H17_34XX_SDRC_CKE1,
 };
 
 struct omap_mux_cfg {
-- 
cgit v1.2.3


From 75f251e3d0803b028f3474fdc75be0994c377ab5 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 24 Jul 2009 19:44:01 -0600
Subject: OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot

Stop setting SDRC_POWER.PWDENA on boot.  There is a nasty erratum
(34xx erratum 1.150) that can cause memory corruption if PWDENA is
enabled.

Based originally on a patch from Samu P. Onkalo <samu.p.onkalo@nokia.com>.

Tested on BeagleBoard rev C2.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Samu P. Onkalo <samu.p.onkalo@nokia.com>
---
 arch/arm/mach-omap2/sdrc.c     | 5 ++++-
 arch/arm/mach-omap2/sram34xx.S | 2 --
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2e9e38db30e..9e3bd4fa781 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -125,8 +125,11 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 	sdrc_init_params_cs1 = sdrc_cs1;
 
 	/* XXX Enable SRFRONIDLEREQ here also? */
+	/*
+	 * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA
+	 * can cause random memory corruption
+	 */
 	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
-		(1 << SDRC_POWER_PWDENA_SHIFT) |
 		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
 	sdrc_write_reg(l, SDRC_POWER);
 }
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 3aef7448b2a..9c2d0465a83 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -58,7 +58,6 @@
 
 /* SDRC_POWER bit settings */
 #define SRFRONIDLEREQ_MASK		0x40
-#define PWDENA_MASK			0x4
 
 /* CM_IDLEST1_CORE bit settings */
 #define ST_SDRC_MASK			0x2
@@ -160,7 +159,6 @@ sdram_in_selfrefresh:
 	ldr	r12, [r11]		@ read the contents of SDRC_POWER
 	mov	r9, r12			@ keep a copy of SDRC_POWER bits
 	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
-	bic 	r12, r12, #PWDENA_MASK	@ clear PWDENA
 	str 	r12, [r11]		@ write back to SDRC_POWER register
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
 idle_sdrc:
-- 
cgit v1.2.3


From 8ff120e5303e27e03aba7b774e86fd43eaf90376 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Fri, 24 Jul 2009 19:44:01 -0600
Subject: OMAP3 SDRC: Fix freeze when scaling CORE dpll to < 83Mhz

This patch fixes a bug in the CORE dpll scaling sequence which was
errouneously clearing some bits in the SDRC DLLA CTRL register and
hence causing a freeze.  The issue was observed only on platforms
which scale CORE dpll to < 83Mhz and hence program the DLL in fixed
delay mode.

Issue reported by Limei Wang <E12499@motorola.com>, with debugging
assistance from Richard Woodruff <r-woodruff2@ti.com> and Girish
Ghongdemath <girishsg@ti.com>.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Limei Wang <E12499@motorola.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Girish Ghongdemath <girishsg@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: updated patch description to include collaboration credits]
---
 arch/arm/mach-omap2/sram34xx.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 9c2d0465a83..e6b112590d7 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -143,7 +143,7 @@ return_to_sdram:
 unlock_dll:
 	ldr	r11, omap3_sdrc_dlla_ctrl
 	ldr	r12, [r11]
-	and	r12, r12, #FIXEDDELAY_MASK
+	bic	r12, r12, #FIXEDDELAY_MASK
 	orr	r12, r12, #FIXEDDELAY_DEFAULT
 	orr	r12, r12, #DLLIDLE_MASK
 	str	r12, [r11]		@ (no OCP barrier needed)
-- 
cgit v1.2.3


From df56556e571234cf26072cd58c01ac3520986b44 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Fri, 24 Jul 2009 19:44:02 -0600
Subject: OMAP3 SDRC: Move the clk stabilization delay to the right place

The clock stabilization delay post a M2 divider change is needed
even before a SDRC interface clock re-enable and not only before
jumping back to SDRAM.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/sram34xx.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index e6b112590d7..82aa4a3d160 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -127,6 +127,8 @@ skip_cs1_params:
 	blne	lock_dll
 	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
 	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
+	mov	r12, r2
+	bl	wait_clk_stable		@ wait for SDRC to stabilize
 	bl	enable_sdrc		@ take SDRC out of idle
 	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
 	bleq	wait_dll_unlock
@@ -134,8 +136,6 @@ skip_cs1_params:
 	cmp	r3, #1			@ if increasing SDRC clk rate,
 	beq	return_to_sdram		@ return to SDRAM code, otherwise,
 	bl	configure_sdrc		@ reprogram SDRC regs now
-	mov	r12, r2
-	bl	wait_clk_stable		@ wait for SDRC to stabilize
 return_to_sdram:
 	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
-- 
cgit v1.2.3


From 72350b29a4c0debfc27c2edbeed9b4ff3f935dd4 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 24 Jul 2009 19:44:03 -0600
Subject: OMAP2/3 clock: split, rename omap2_wait_clock_ready()

Some OMAP2/3 hardware modules have CM_IDLEST attributes that are not
handled by the current omap2_wait_clock_ready() code.  In preparation
for patches that fix the unusual devices, rename the function
omap2_wait_clock_ready() to omap2_wait_module_ready() and split it
into three parts:

1. A clkops-specific companion clock return function (by default,
   omap2_clk_dflt_find_companion())

2. A clkops-specific CM_IDLEST register address and bit shift return
   function (by default, omap2_clk_dflt_find_idlest())

3. Code to wait for the CM to indicate that the module is ready
   (omap2_cm_wait_idlest())

Clocks can now specify their own custom find_companion() and find_idlest()
functions; used in subsequent patches.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock.c             | 156 ++++++++++++++++----------------
 arch/arm/mach-omap2/clock.h             |   6 ++
 arch/arm/mach-omap2/prcm.c              |  43 +++++++++
 arch/arm/plat-omap/include/mach/clock.h |   2 +
 arch/arm/plat-omap/include/mach/prcm.h  |   1 +
 5 files changed, 131 insertions(+), 77 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b0665f161c0..456e2ad5f62 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -27,6 +27,7 @@
 #include <mach/clock.h>
 #include <mach/clockdomain.h>
 #include <mach/cpu.h>
+#include <mach/prcm.h>
 #include <asm/div64.h>
 
 #include <mach/sdrc.h>
@@ -38,8 +39,6 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-#define MAX_CLOCK_ENABLE_WAIT		100000
-
 /* DPLL rate rounding: minimum DPLL multiplier, divider values */
 #define DPLL_MIN_MULTIPLIER		1
 #define DPLL_MIN_DIVIDER		1
@@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
 }
 
 /**
- * omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
- * @mask: value to mask against to determine if the clock is active
- * @name: name of the clock (for printk)
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
  *
- * Returns 1 if the clock enabled in time, or 0 if it failed to enable
- * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks.  For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock.  Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active.  Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts.  No return value.
  */
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+				   u8 *other_bit)
 {
-	int i = 0;
-	int ena = 0;
+	u32 r;
 
 	/*
-	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
-	 * 34xx reverses this, just to keep us on our toes
+	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
+	 * it's just a matter of XORing the bits.
 	 */
-	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
-		ena = mask;
-	else if (cpu_mask & RATE_IN_343X)
-		ena = 0;
-
-	/* Wait for lock */
-	while (((__raw_readl(reg) & mask) != ena) &&
-	       (i++ < MAX_CLOCK_ENABLE_WAIT)) {
-		udelay(1);
-	}
-
-	if (i <= MAX_CLOCK_ENABLE_WAIT)
-		pr_debug("Clock %s stable after %d loops\n", name, i);
-	else
-		printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
-		       name, MAX_CLOCK_ENABLE_WAIT);
-
-
-	return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
-};
+	r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
 
+	*other_reg = (__force void __iomem *)r;
+	*other_bit = clk->enable_bit;
+}
 
-/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock.  This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2).  This is not true for all modules.  No return value.
  */
-static void omap2_clk_wait_ready(struct clk *clk)
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+				u8 *idlest_bit)
 {
-	void __iomem *reg, *other_reg, *st_reg;
-	u32 bit;
+	u32 r;
 
-	/*
-	 * REVISIT: This code is pretty ugly.  It would be nice to generalize
-	 * it and pull it into struct clk itself somehow.
-	 */
-	reg = clk->enable_reg;
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = clk->enable_bit;
+}
 
-	/*
-	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
-	 * it's just a matter of XORing the bits.
-	 */
-	other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+/**
+ * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE).  This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code.  No return value.
+ */
+static void omap2_module_wait_ready(struct clk *clk)
+{
+	void __iomem *companion_reg, *idlest_reg;
+	u8 other_bit, idlest_bit;
+
+	/* Not all modules have multiple clocks that their IDLEST depends on */
+	if (clk->ops->find_companion) {
+		clk->ops->find_companion(clk, &companion_reg, &other_bit);
+		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+			return;
+	}
 
-	/* Check if both functional and interface clocks
-	 * are running. */
-	bit = 1 << clk->enable_bit;
-	if (!(__raw_readl(other_reg) & bit))
-		return;
-	st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
 
-	omap2_wait_clock_ready(st_reg, bit, clk->name);
+	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
 }
 
-static int omap2_dflt_clk_enable(struct clk *clk)
+int omap2_dflt_clk_enable(struct clk *clk)
 {
 	u32 v;
 
 	if (unlikely(clk->enable_reg == NULL)) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		pr_err("clock.c: Enable for %s without enable code\n",
 		       clk->name);
 		return 0; /* REVISIT: -EINVAL */
 	}
@@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk)
 	__raw_writel(v, clk->enable_reg);
 	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
-	return 0;
-}
+	if (clk->ops->find_idlest)
+		omap2_module_wait_ready(clk);
 
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
-{
-	int ret;
-
-	if (!clk->enable_reg) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
-		return 0; /* REVISIT: -EINVAL */
-	}
-
-	ret = omap2_dflt_clk_enable(clk);
-	if (ret == 0)
-		omap2_clk_wait_ready(clk);
-	return ret;
+	return 0;
 }
 
-static void omap2_dflt_clk_disable(struct clk *clk)
+void omap2_dflt_clk_disable(struct clk *clk)
 {
 	u32 v;
 
@@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk)
 }
 
 const struct clkops clkops_omap2_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable_wait,
+	.enable		= omap2_dflt_clk_enable,
 	.disable	= omap2_dflt_clk_disable,
+	.find_companion	= omap2_clk_dflt_find_companion,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
 };
 
 const struct clkops clkops_omap2_dflt = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 2679ddfa642..9ae7540f8af 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
+int omap2_dflt_clk_enable(struct clk *clk);
+void omap2_dflt_clk_disable(struct clk *clk);
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+				   u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+				u8 *idlest_bit);
 
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index f945156d558..ced555a4cd1 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/common.h>
 #include <mach/prcm.h>
@@ -28,6 +29,8 @@
 static void __iomem *prm_base;
 static void __iomem *cm_base;
 
+#define MAX_MODULE_ENABLE_WAIT		100000
+
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
@@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 }
 EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
 
+/**
+ * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
+ * @reg: physical address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the module indicated readiness in time, or 0 if it
+ * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ */
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+{
+	int i = 0;
+	int ena = 0;
+
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 */
+	if (cpu_is_omap24xx())
+		ena = mask;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	/* Wait for lock */
+	while (((__raw_readl(reg) & mask) != ena) &&
+	       (i++ < MAX_MODULE_ENABLE_WAIT))
+		udelay(1);
+
+	if (i < MAX_MODULE_ENABLE_WAIT)
+		pr_debug("cm: Module associated with clock %s ready after %d "
+			 "loops\n", name, i);
+	else
+		pr_err("cm: Module associated with clock %s didn't enable in "
+		       "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+
+	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
 void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 {
 	prm_base = omap2_globals->prm;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index f9f65e1ba3f..4b8b0d65cbf 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -20,6 +20,8 @@ struct clockdomain;
 struct clkops {
 	int			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
+	void			(*find_idlest)(struct clk *, void __iomem **, u8 *);
+	void			(*find_companion)(struct clk *, void __iomem **, u8 *);
 };
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 24ac3c71591..cda2a70397b 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -25,6 +25,7 @@
 
 u32 omap_prcm_get_reset_sources(void);
 void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
 
 #endif
 
-- 
cgit v1.2.3


From 3dc2197579089c5b74c7fba666c8ccf1a449afb4 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 24 Jul 2009 19:44:04 -0600
Subject: OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register

OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the CM_*CLKEN bits
are in CM_{I,F}CLKEN2_CORE [1].  Fix by implementing a custom clkops
.find_idlest function to return the correct slave IDLEST register.

...

1. OMAP2430 Multimedia Device Package-on-Package (POP) Silicon Revision 2.1
   (Rev. V) Technical Reference Manual, tables 4-99 and 4-105.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock24xx.c | 37 +++++++++++++++++++++++++++++++++++--
 arch/arm/mach-omap2/clock24xx.h |  4 ++--
 2 files changed, 37 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 44de0271fc2..bc5d3ac6661 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -30,6 +30,7 @@
 
 #include <mach/clock.h>
 #include <mach/sram.h>
+#include <mach/prcm.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
@@ -43,6 +44,18 @@
 static const struct clkops clkops_oscck;
 static const struct clkops clkops_fixed;
 
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit);
+
+/* 2430 I2CHS has non-standard IDLEST register */
+static const struct clkops clkops_omap2430_i2chs_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 #include "clock24xx.h"
 
 struct omap_clk {
@@ -239,6 +252,26 @@ static void __iomem *prcm_clksrc_ctrl;
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
 
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit)
+{
+	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+	*idlest_bit = clk->enable_bit;
+}
+
+
 /**
  * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
  * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
@@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk)
 	else if (clk == &apll54_ck)
 		cval = OMAP24XX_ST_54M_APLL;
 
-	omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
-			    clk->name);
+	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+			     clk->name);
 
 	/*
 	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 458f00cdcbe..d19cf7a7d8d 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = {
 
 static struct clk i2chs2_fck = {
 	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2430_i2chs_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = {
 
 static struct clk i2chs1_fck = {
 	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2430_i2chs_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
-- 
cgit v1.2.3


From 3c82e229f09a6acc8d24dc27c5e0e60b1d7161c2 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 24 Jul 2009 19:44:06 -0600
Subject: OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB

Fix two bugs in the OMAP3 clock tree pertaining to the SSI, DSS,
USBHOST, and HSOTGUSB devices.  These devices are both interconnect
initiators and targets.  Without this patch, clk_enable()s on clocks for
these modules can be very high latency (potentially up to ~200
milliseconds) and message such as the following are generated:

    Clock usbhost_48m_fck didn't enable in 100000 tries

Two bugs are fixed by this patch.  First, OMAP hardware only supports
target CM_IDLEST register bits on ES2+ chips and beyond.  ES1 chips
should not wait for these clocks to enable.  So, split the appropriate
clocks into ES1 and ES2+ variants, so that kernels running on ES1
devices won't try to wait.

Second, the current heuristic in omap2_clk_dflt_find_idlest() will
fail for these clocks.  It assumes that the CM_IDLEST bit to wait upon
is the same as the CM_*CLKEN bit, which is false[1].  Fix by
implementing custom clkops .find_idlest function pointers for the
appropriate clocks that return the correct slave IDLEST bit shift.

This was originally fixed in the linux-omap kernel during 2.6.29 in a
slightly different manner[2][3].

In the medium-term future, all of the module IDLEST code will
eventually be moved to the omap_hwmod code.

Problem reported by Jarkko Nikula <jhnikula@gmail.com>:

    http://marc.info/?l=linux-omap&m=124306184903679&w=2

...

1. See for example 34xx TRM Revision P Table 4-213 and 4-217 (for the
   DSS case).

2. http://www.spinics.net/lists/linux-omap/msg05512.html et seq.

3. http://lkml.indiana.edu/hypermail/linux/kernel/0901.3/01498.html


Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
---
 arch/arm/mach-omap2/clock34xx.c | 118 +++++++++++++++++++++++++++++++++++++---
 arch/arm/mach-omap2/clock34xx.h |  85 +++++++++++++++++++++++++----
 2 files changed, 185 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 1c6480d3ad6..cd7819cc0c9 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -2,7 +2,7 @@
  * OMAP3-specific clock framework functions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  * Testing and integration fixes by Jouni Högander
@@ -41,6 +41,37 @@
 
 static const struct clkops clkops_noncore_dpll_ops;
 
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit);
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit);
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+						    void __iomem **idlest_reg,
+						    u8 *idlest_bit);
+
+static const struct clkops clkops_omap3430es2_ssi_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 #include "clock34xx.h"
 
 struct omap_clk {
@@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
 	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
@@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
 	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
-	CLK(NULL,	"ssi_ick",	&ssi_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
 	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
 	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
 	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
 	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
 	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
-	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapfb",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
@@ -300,6 +337,73 @@ static struct omap_clk omap34xx_clks[] = {
  */
 #define SDRC_MPURATE_LOOPS		96
 
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits.  For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.)  No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+						    void __iomem **idlest_reg,
+						    u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	/* USBHOST_IDLE has same shift */
+	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+						 void __iomem **idlest_reg,
+						 u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+}
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index e433aec4efd..57cc2725b92 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = {
 	{ .parent = NULL }
 };
 
-static struct clk ssi_ssr_fck = {
+static struct clk ssi_ssr_fck_3430es1 = {
 	.name		= "ssi_ssr_fck",
 	.ops		= &clkops_omap2_dflt,
 	.init		= &omap2_init_clksel_parent,
@@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static struct clk ssi_sst_fck = {
+static struct clk ssi_ssr_fck_3430es2 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
 	.name		= "ssi_sst_fck",
 	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck,
+	.parent		= &ssi_ssr_fck_3430es1,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es2,
 	.fixed_div	= 2,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
@@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk hsotgusb_ick = {
+static struct clk hsotgusb_ick_3430es1 = {
 	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap3430es2_hsotgusb_wait,
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
@@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ssi_ick = {
+static struct clk ssi_ick_3430es1 = {
 	.name		= "ssi_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &ssi_l4_ick,
@@ -1957,6 +1988,16 @@ static struct clk ssi_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk ssi_ick_3430es2 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 /* REVISIT: Technically the TRM claims that this is CORE_CLK based,
  * but l4_ick makes more sense to me */
 
@@ -2024,7 +2065,7 @@ static struct clk des1_ick = {
 };
 
 /* DSS */
-static struct clk dss1_alwon_fck = {
+static struct clk dss1_alwon_fck_3430es1 = {
 	.name		= "dss1_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m4x2_ck,
@@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dss1_alwon_fck_3430es2 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk dss_ick = {
+static struct clk dss_ick_3430es1 = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -2079,6 +2130,18 @@ static struct clk dss_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dss_ick_3430es2 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 /* CAM */
 
 static struct clk cam_mclk = {
@@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = {
 
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll5_m2_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = {
 
 static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = {
 static struct clk usbhost_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "usbhost_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
-- 
cgit v1.2.3


From 81566a060bb8f989cc369ea28837b05bd4adcedb Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:00:15 +0530
Subject: ARM: includecheck fix: misc.c

fix the following 'make includecheck' warning:

  arch/arm/boot/compressed/misc.c: linux/compiler.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/compressed/misc.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9e6e512f011..17153b54613 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -29,7 +29,6 @@ unsigned int __machine_arch_type;
 
 static void putstr(const char *ptr);
 
-#include <linux/compiler.h>
 #include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
-- 
cgit v1.2.3


From feecaf73bb437cf72a44bd71598c6532d357f78e Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:01:39 +0530
Subject: ARM: includecheck fix: atomic.h

fix the following 'make includecheck' warning:

  arch/arm/include/asm/atomic.h: asm/system.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/atomic.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9e07fe50702..9ed2377fe8e 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 
 #else /* ARM_ARCH_6 */
 
-#include <asm/system.h>
-
 #ifdef CONFIG_SMP
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
-- 
cgit v1.2.3


From 44e96d452173ed22a7ba2291c7d566bf4b406f62 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:03:08 +0530
Subject: ARM: includecheck fix: board-dm355-evm.c

fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-dm355-evm.c: mach/common.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-dm355-evm.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 5ac2f565d86..d6ab64ccd49 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -37,7 +37,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-- 
cgit v1.2.3


From 7f25b0ac2dde2de399d6cfe42d9ec7066e665f2f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:04:33 +0530
Subject: ARM: includecheck fix: board-dm355-leopard.c

fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-dm355-leopard.c: mach/common.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-dm355-leopard.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 28c9008df4f..84ad5d161a8 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -36,7 +36,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-- 
cgit v1.2.3


From 6608168486973a33d24d27b25fc94d4743c1a1e5 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:05:34 +0530
Subject: ARM: includecheck fix: board-dm644x-evm.c

fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-dm644x-evm.c: mach/common.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-dm644x-evm.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index d9d40450bdc..56c8cd01de9 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -45,7 +45,6 @@
 #include <mach/nand.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
-- 
cgit v1.2.3


From 78eacf0b0373f524509da261b771f8baa28806b5 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:06:42 +0530
Subject: ARM: includecheck fix: board-dm646x-evm.c

fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-dm646x-evm.c: mach/common.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e17de635262..8657e72debc 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -47,7 +47,6 @@
 #include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
-- 
cgit v1.2.3


From 7a33aed825c4d2bafea748384e3331661fc3a180 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:07:26 +0530
Subject: ARM: includecheck fix: board-sffsdr.c

fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-sffsdr.c: mach/common.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Philip Balister <philip@opensdr.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-sffsdr.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 748a8e48541..7acdfd8ac07 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -52,7 +52,6 @@
 #include <mach/serial.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
-#include <mach/common.h>
 
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
-- 
cgit v1.2.3


From 52cbbd41f7afeceba4be2e4062138781aacd440c Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:10:02 +0530
Subject: ARM: includecheck fix: mach-omap1/mcbsp.c

fix the following 'make includecheck' warning:

  arch/arm/mach-omap1/mcbsp.c: mach/irqs.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/mcbsp.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896b..505d98cfe50 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
-- 
cgit v1.2.3


From efda2b4c8a643290867d9f5816e36f71a5acee7d Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:11:05 +0530
Subject: ARM: includecheck fix: mach-omap2/mcbsp.c

fix the following 'make includecheck' warning:

  arch/arm/mach-omap2/mcbsp.c: mach/irqs.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/mcbsp.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..99b6e154631 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
-- 
cgit v1.2.3


From 2e6e2c143cdefc2624722659766d1f3c098d79e1 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:12:07 +0530
Subject: ARM: includecheck fix: plat-s3c64xx/pm.c

fix the following 'make includecheck' warning:

  arch/arm/plat-s3c64xx/pm.c: plat/regs-gpio.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c64xx/pm.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/plat-s3c64xx/pm.c
index 07a6516a4f3..47632fc7eb6 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/plat-s3c64xx/pm.c
@@ -117,8 +117,6 @@ void s3c_pm_save_core(void)
  * this.
  */
 
-#include <plat/regs-gpio.h>
-
 static void s3c64xx_cpu_suspend(void)
 {
 	unsigned long tmp;
-- 
cgit v1.2.3


From 40e03b581a8a0b638bc1e9b957ae0536a4a00ad3 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 8 Jul 2009 20:13:24 +0530
Subject: ARM: includecheck fix: plat-stmp3xxx/pinmux.c

fix the following 'make includecheck' warning:

  arch/arm/plat-stmp3xxx/pinmux.c: linux/sysdev.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: dmitry pervushin <dpervushin@embeddedalley.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-stmp3xxx/pinmux.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d4120038220..6d6b1a468ed 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
 #include <linux/sysdev.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
-- 
cgit v1.2.3


From 4c8abb556b393b3ed73d72481ba27705294f6dc6 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 12:16:57 +0100
Subject: ARM: 5622/1: at91: at91sam9g45 headers: DMA peripheral identifiers

It adds DMA peripheral identifiers for hardware handshaking interface. It will
be used in platform code.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c42cf5f0c5..a526869aee3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -135,4 +135,21 @@
 
 #define CONSISTENT_DMA_SIZE	SZ_4M
 
+/*
+ * DMA peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI0		 0
+#define AT_DMA_ID_SPI0_TX	 1
+#define AT_DMA_ID_SPI0_RX	 2
+#define AT_DMA_ID_SPI1_TX	 3
+#define AT_DMA_ID_SPI1_RX	 4
+#define AT_DMA_ID_SSC0_TX	 5
+#define AT_DMA_ID_SSC0_RX	 6
+#define AT_DMA_ID_SSC1_TX	 7
+#define AT_DMA_ID_SSC1_RX	 8
+#define AT_DMA_ID_AC97_TX	 9
+#define AT_DMA_ID_AC97_RX	10
+#define AT_DMA_ID_MCI1		13
+
 #endif
-- 
cgit v1.2.3


From efffde36d20613d91a5ea9529b03f477077f41ea Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 9 Jul 2009 11:33:39 +0200
Subject: microblaze: Define tlb_flush macro

This fix remove bug which we had till now in all
Microblaze MMU code. Primary tested on mmap01 LTP test.
We forget to flush invalid tlb which were changed - we
used them and there were wrong old data which wasn't correct.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/tlb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index c472d280113..e8abd4a0349 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_MICROBLAZE_TLB_H
 #define _ASM_MICROBLAZE_TLB_H
 
-#define tlb_flush(tlb)	do {} while (0)
+#define tlb_flush(tlb)	flush_tlb_mm((tlb)->mm)
 
 #include <asm-generic/tlb.h>
 
-- 
cgit v1.2.3


From 1170902b343053f50d4caf8ec2aa745fd0ce5c84 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:32:08 +0800
Subject: microblaze: remove duplicated #include

Remove duplicated #include('s) in
  arch/microblaze/include/asm/io.h

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/io.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 5c173424d07..7c3ec13b44d 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -14,7 +14,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
-#include <asm/byteorder.h>
 #include <linux/mm.h>          /* Get struct page {...} */
 
 
-- 
cgit v1.2.3


From 909964ec89ba466d75d53250d5738d1891cc1a3d Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Mon, 22 Jun 2009 14:02:09 +1000
Subject: microblaze: Final support for statically linked DTB

If r7 is zero at kernel boot, or does not point to a valid DTB, then
we fall back to a DTB (assumed to be) linked statically in the kernel, instead
of blindly copying bogus cruft into the kernel DTB memory region

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/prom.h | 23 +++++++++++++----------
 arch/microblaze/kernel/head.S      | 15 +++++++++++----
 arch/microblaze/kernel/setup.c     |  3 ++-
 3 files changed, 26 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 20f7b3a926e..37e6f305a68 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -16,6 +16,18 @@
 #define _ASM_MICROBLAZE_PROM_H
 #ifdef __KERNEL__
 
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
+#define OF_DT_END_NODE		0x2 /* End node */
+#define OF_DT_PROP		0x3 /* Property: name off, size, content */
+#define OF_DT_NOP		0x4 /* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+#ifndef __ASSEMBLY__
+
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
@@ -29,16 +41,6 @@
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
-#define OF_DT_END_NODE		0x2 /* End node */
-#define OF_DT_PROP		0x3 /* Property: name off, size, content */
-#define OF_DT_NOP		0x4 /* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
 /*
  * This is what gets passed to the kernel by prom_init or kexec
  *
@@ -309,5 +311,6 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
  */
 #include <linux/of.h>
 
+#endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index e568d6ec621..815bcaae99c 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -31,6 +31,7 @@
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
+#include <asm/prom.h>		/* for OF_DT_HEADER */
 
 #ifdef CONFIG_MMU
 #include <asm/setup.h> /* COMMAND_LINE_SIZE */
@@ -54,11 +55,16 @@ ENTRY(_start)
 	andi	r1, r1, ~2
 	mts	rmsr, r1
 
-/* save fdt to kernel location */
-/* r7 stores pointer to fdt blob */
-	beqi	r7, no_fdt_arg
+/* r7 may point to an FDT, or there may be one linked in.
+   if it's in r7, we've got to save it away ASAP.
+   We ensure r7 points to a valid FDT, just in case the bootloader
+   is broken or non-existent */
+	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
+	lw	r11, r0, r7			/* Does r7 point to a */
+	rsubi	r11, r11, OF_DT_HEADER		/* valid FDT? */
+	bnei	r11, no_fdt_arg			/* No - get out of here */
 	or	r11, r0, r0 /* incremment */
-	ori	r4, r0, TOPHYS(_fdt_start) /* save bram context */
+	ori	r4, r0, TOPHYS(_fdt_start)
 	ori	r3, r0, (0x4000 - 4)
 _copy_fdt:
 	lw	r12, r7, r11 /* r12 = r7 + r11 */
@@ -67,6 +73,7 @@ _copy_fdt:
 	bgtid	r3, _copy_fdt /* loop for all entries */
 	addik	r3, r3, -4 /* descrement loop */
 no_fdt_arg:
+	add	r7, r0, r0			/* Clear r7, just to be sure */
 
 #ifdef CONFIG_MMU
 
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 8709bea0960..59a383621b2 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -139,7 +139,8 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 #endif
 
 	early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
-	printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+	if(fdt)
+		printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
 
 #ifdef CONFIG_MTD_UCLINUX
 	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
-- 
cgit v1.2.3


From 74510f2a2751ed56b5ab099b2e3b7697b91aa77e Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 22 Jun 2009 10:28:40 +0200
Subject: microblaze: Add messages about FDT blob

Print accurate message about place where FDT blob is.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/setup.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 59a383621b2..2a97bf513b6 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -138,9 +138,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	setup_early_printk(NULL);
 #endif
 
-	early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
-	if(fdt)
-		printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+	early_printk("Ramdisk addr 0x%08x, ", ram);
+	if (fdt)
+		early_printk("FDT at 0x%08x\n", fdt);
+	else
+		early_printk("Compiled-in FDT at 0x%08x\n",
+					(unsigned int)_fdt_start);
 
 #ifdef CONFIG_MTD_UCLINUX
 	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
-- 
cgit v1.2.3


From a69cb8c4662dd0a7b01b32a9165b1a1697068f19 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 22 Jun 2009 10:55:40 +0200
Subject: microblaze: Not to clear r7 after copying DTB to kernel

I can't clear r7 because if I do it I lose information
where DTB come from.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/head.S | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 815bcaae99c..3c4d4a2803e 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -73,7 +73,6 @@ _copy_fdt:
 	bgtid	r3, _copy_fdt /* loop for all entries */
 	addik	r3, r3, -4 /* descrement loop */
 no_fdt_arg:
-	add	r7, r0, r0			/* Clear r7, just to be sure */
 
 #ifdef CONFIG_MMU
 
-- 
cgit v1.2.3


From ea3fd1466f81a851452bf7f34ccb9b5058e4793c Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 22 Jun 2009 12:31:55 +0200
Subject: microblaze: Clear print messages for DTB passing via r7

It is necessary to zeroed r7 when r7 points to bad
dtb - this caused that we have correct messages
about compiled-in dtb or passing via r7

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/head.S | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 3c4d4a2803e..e41c6ce2a7b 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -62,7 +62,10 @@ ENTRY(_start)
 	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
 	lw	r11, r0, r7			/* Does r7 point to a */
 	rsubi	r11, r11, OF_DT_HEADER		/* valid FDT? */
+	beqi	r11, _prepare_copy_fdt
+	or	r7, r0, r0		/* clear R7 when not valid DTB */
 	bnei	r11, no_fdt_arg			/* No - get out of here */
+_prepare_copy_fdt:
 	or	r11, r0, r0 /* incremment */
 	ori	r4, r0, TOPHYS(_fdt_start)
 	ori	r3, r0, (0x4000 - 4)
-- 
cgit v1.2.3


From 7bcb63b21327427b130edeb6e6ad44ee260b3043 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 13 Jul 2009 16:46:54 +0200
Subject: microblaze: Fix put_user macro for 64bits arguments

For 64bits arguments gcc caused that put_user macro
works with wrong value because of optimalization.
Adding volatile caused that gcc not optimized it.

It is possible to use (as Blackfin do) two put_user
macros with 32bits arguments but there is one more
instruction which is due to duplication zero return
value which is called put_user_asm macro.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/uaccess.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 65adad61e7e..5431b4631a7 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -189,7 +189,7 @@ extern long strnlen_user(const char *src, long count);
 
 #define __put_user(x, ptr)						\
 ({									\
-	__typeof__(*(ptr)) __gu_val = x;				\
+	__typeof__(*(ptr)) volatile __gu_val = (x);			\
 	long __gu_err = 0;						\
 	switch (sizeof(__gu_val)) {					\
 	case 1:								\
-- 
cgit v1.2.3


From f14d6f7c31c73a902a6b567dc719128e74603902 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 15 Jul 2009 13:39:35 +0200
Subject: microblaze: Add _PAGE_FILE macros to pgtable.h

We need to define _PAGE_FILE macro and change pte
functions. Microblaze use the same MMU as PowerPC
that's why we define _PAGE_FILE in the same style.
This change fixed remap_file_pages01 LTP test.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/pgtable.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4c57a586a98..cc3a4dfc3ea 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -185,6 +185,7 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 /* Definitions for MicroBlaze. */
 #define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
 #define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
 #define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
 #define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
@@ -320,8 +321,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
 static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-/* FIXME */
-static inline int pte_file(pte_t pte)		{ return 0; }
+static inline int pte_file(pte_t pte)  { return pte_val(pte) & _PAGE_FILE; }
 
 static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -488,7 +488,7 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
 /* Encode and decode a nonlinear file mapping entry */
 #define PTE_FILE_MAX_BITS	29
 #define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
-#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) })
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-- 
cgit v1.2.3


From f10eca6e107fd223c24393c09c40b916d2b3c427 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 16 Jul 2009 16:00:49 +0200
Subject: microblaze: Fix do_page_fault for no context

Calling fixup when we are in kernel mode. This
prevent fault for copy_to/from_user. This fault
was find thanks to writev01/03/04 LTP tests.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/mm/fault.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 956607a63f4..398c7611735 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -122,15 +122,10 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	}
 #endif /* CONFIG_KGDB */
 
-	if (in_atomic() || mm == NULL) {
-		/* FIXME */
-		if (kernel_mode(regs)) {
-			printk(KERN_EMERG
-				"Page fault in kernel mode - Oooou!!! pid %d\n",
-				current->pid);
-			_exception(SIGSEGV, regs, code, address);
-			return;
-		}
+	if (in_atomic() || !mm) {
+		if (kernel_mode(regs))
+			goto bad_area_nosemaphore;
+
 		/* in_atomic() in user mode is really bad,
 		   as is current->mm == NULL. */
 		printk(KERN_EMERG "Page fault in user mode with "
-- 
cgit v1.2.3


From 94ad8eb854cbc1cf875a318f9b97314ddc6b1560 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 21 Jul 2009 12:47:04 +0200
Subject: microblaze: Detect new Microblaze 7.20 versions

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index a10bea119b9..c411c6757de 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -26,6 +26,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.10.b", 0x09},
 	{"7.10.c", 0x0a},
 	{"7.10.d", 0x0b},
+	{"7.20.a", 0x0c},
+	{"7.20.b", 0x0d},
 	/* FIXME There is no keycode defined in MBV for these versions */
 	{"2.10.a", 0x10},
 	{"3.00.a", 0x20},
-- 
cgit v1.2.3


From 3863dbceac7e69642b95f43de1c12c6236fdbe5b Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 21 Jul 2009 12:48:01 +0200
Subject: microblaze: Support unaligned address for put/get_user macros

This patch add support for cases where load/store instruction
in put/get_user macro gets unaligned pointer to data and this
address is not valid. I prevent all cases which can failed.
I had to disable first stage of unaligned handler which is used
only for noMMU kernel and the whole work is done when interrupt
is enabled.
You have enable HW support for detect unaligned access in Microblaze.

This patch fixed three LTP tests:
getpeername01, getsockname01, socketpair01

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/hw_exception_handler.S | 109 +++++++++++---------------
 arch/microblaze/mm/fault.c                    |   2 +-
 2 files changed, 47 insertions(+), 64 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 9d591cd74fc..3288c973767 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -74,6 +74,7 @@
 
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
+#include <asm/signal.h>
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
@@ -428,19 +429,9 @@ handle_unaligned_ex:
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
 _no_delayslot:
-#endif
-
-#ifdef CONFIG_MMU
-	/* Check if unaligned address is last on a 4k page */
-		andi	r5, r4, 0xffc
-		xori	r5, r5, 0xffc
-		bnei	r5, _unaligned_ex2
-	_unaligned_ex1:
-		RESTORE_STATE;
-/* Another page must be accessed or physical address not in page table */
-		bri	unaligned_data_trap
-
-	_unaligned_ex2:
+	/* jump to high level unaligned handler */
+	RESTORE_STATE;
+	bri	unaligned_data_trap
 #endif
 	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
@@ -450,45 +441,6 @@ _no_delayslot:
 	srl	r6, r6;
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
-#ifdef CONFIG_MMU
-	/* Get physical address */
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	ori	r5, r0, CONFIG_KERNEL_START
-	cmpu	r5, r4, r5
-	bgti	r5, _unaligned_ex3
-	ori	r5, r0, swapper_pg_dir
-	bri	_unaligned_ex4
-
-	/* Get the PGD for the current thread. */
-_unaligned_ex3: /* user thread */
-	addi	r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
-	lwi	r5, r5, TASK_THREAD + PGDIR
-_unaligned_ex4:
-	tophys(r5,r5)
-	BSRLI(r6,r4,20)			/* Create L1 (pgdir/pmd) address */
-	andi	r6, r6, 0xffc
-/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
-	or	r5, r5, r6
-	lwi	r6, r5, 0		/* Get L1 entry */
-	andi	r5, r6, 0xfffff000	/* Extract L2 (pte) base address. */
-	beqi	r5, _unaligned_ex1	/* Bail if no table */
-
-	tophys(r5,r5)
-	BSRLI(r6,r4,10)			/* Compute PTE address */
-	andi	r6, r6, 0xffc
-	andi	r5, r5, 0xfffff003
-	or	r5, r5, r6
-	lwi	r5, r5, 0		/* Get Linux PTE */
-
-	andi	r6, r5, _PAGE_PRESENT
-	beqi	r6, _unaligned_ex1	/* Bail if no page */
-
-	andi	r5, r5, 0xfffff000	/* Extract RPN */
-	andi	r4, r4, 0x00000fff	/* Extract offset */
-	or	r4, r4, r5		/* Create physical address */
-#endif /* CONFIG_MMU */
 
 	andi	r6, r3, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
@@ -959,15 +911,15 @@ _unaligned_data_exception:
 	andi	r6, r3, 0x800;	/* Extract ESR[W] - delay slot */
 ex_lw_vm:
 	beqid	r6, ex_lhw_vm;
-	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
+load1:	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
 /* Load a word, byte-by-byte from destination address and save it in tmp space*/
 	la	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
-	lbui	r5, r4, 1;
+load2:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
-	lbui	r5, r4, 2;
+load3:	lbui	r5, r4, 2;
 	sbi	r5, r6, 2;
-	lbui	r5, r4, 3;
+load4:	lbui	r5, r4, 3;
 	sbi	r5, r6, 3;
 	brid	ex_lw_tail_vm;
 /* Get the destination register value into r3 - delay slot */
@@ -977,7 +929,7 @@ ex_lhw_vm:
 	 * save it in tmp space */
 	la	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
-	lbui	r5, r4, 1;
+load5:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
 	lhui	r3, r6, 0;	/* Get the destination register value into r3 */
 ex_lw_tail_vm:
@@ -996,22 +948,53 @@ ex_sw_tail_vm:
 	swi	r3, r5, 0;	/* Get the word - delay slot */
 	/* Store the word, byte-by-byte into destination address */
 	lbui	r3, r5, 0;
-	sbi	r3, r4, 0;
+store1:	sbi	r3, r4, 0;
 	lbui	r3, r5, 1;
-	sbi	r3, r4, 1;
+store2:	sbi	r3, r4, 1;
 	lbui	r3, r5, 2;
-	sbi	r3, r4, 2;
+store3:	sbi	r3, r4, 2;
 	lbui	r3, r5, 3;
 	brid	ret_from_exc;
-	sbi	r3, r4, 3;	/* Delay slot */
+store4:	sbi	r3, r4, 3;	/* Delay slot */
 ex_shw_vm:
 	/* Store the lower half-word, byte-by-byte into destination address */
 	lbui	r3, r5, 2;
-	sbi	r3, r4, 0;
+store5:	sbi	r3, r4, 0;
 	lbui	r3, r5, 3;
 	brid	ret_from_exc;
-	sbi	r3, r4, 1;	/* Delay slot */
+store6:	sbi	r3, r4, 1;	/* Delay slot */
 ex_sw_end_vm:			/* Exception handling of store word, ends. */
+
+/* We have to prevent cases that get/put_user macros get unaligned pointer
+ * to bad page area. We have to find out which origin instruction caused it
+ * and called fixup for that origin instruction not instruction in unaligned
+ * handler */
+ex_unaligned_fixup:
+	ori	r5, r7, 0 /* setup pointer to pt_regs */
+	lwi	r6, r7, PT_PC; /* faulting address is one instruction above */
+	addik	r6, r6, -4 /* for finding proper fixup */
+	swi	r6, r7, PT_PC; /* a save back it to PT_PC */
+	addik	r7, r0, SIGSEGV
+	/* call bad_page_fault for finding aligned fixup, fixup address is saved
+	 * in PT_PC which is used as return address from exception */
+	la	r15, r0, ret_from_exc-8 /* setup return address */
+	brid	bad_page_fault
+	nop
+
+/* We prevent all load/store because it could failed any attempt to access */
+.section __ex_table,"a";
+	.word	load1,ex_unaligned_fixup;
+	.word	load2,ex_unaligned_fixup;
+	.word	load3,ex_unaligned_fixup;
+	.word	load4,ex_unaligned_fixup;
+	.word	load5,ex_unaligned_fixup;
+	.word	store1,ex_unaligned_fixup;
+	.word	store2,ex_unaligned_fixup;
+	.word	store3,ex_unaligned_fixup;
+	.word	store4,ex_unaligned_fixup;
+	.word	store5,ex_unaligned_fixup;
+	.word	store6,ex_unaligned_fixup;
+.previous;
 .end _unaligned_data_exception
 #endif /* CONFIG_MMU */
 
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 398c7611735..d9d249a66ff 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -69,7 +69,7 @@ static int store_updates_sp(struct pt_regs *regs)
  * It is called from do_page_fault above and from some of the procedures
  * in traps.c.
  */
-static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 {
 	const struct exception_table_entry *fixup;
 /* MS: no context */
-- 
cgit v1.2.3


From bfc0ca0d33e24fca5b89acb378a8a9712ffe22b6 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 19:55:35 +0200
Subject: microblaze: remove sys_ipc

The ipc system call is now unused in microblaze,
as the system call table points directly to the
indidual system calls for IPC.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/sys_microblaze.c | 99 ---------------------------------
 arch/microblaze/kernel/syscall_table.S  |  2 +-
 2 files changed, 1 insertion(+), 100 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index e000bce09b2..b96f1682bb2 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -33,105 +33,6 @@
 #include <linux/unistd.h>
 
 #include <asm/syscalls.h>
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. This will be remove with new toolchain.
- */
-asmlinkage long
-sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -EINVAL;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semop(first, (struct sembuf *)ptr, second);
-		break;
-	case SEMGET:
-		ret = sys_semget(first, second, third);
-		break;
-	case SEMCTL:
-	{
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-				|| (get_user(fourth.__pad, (void **)ptr)) ;
-		if (ret)
-			break;
-		ret = sys_semctl(first, second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
-				? 0 : -EFAULT) || copy_from_user(&tmp,
-				(struct ipc_kludge *) ptr, sizeof(tmp));
-			if (ret)
-				break;
-			ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
-					third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv(first, (struct msgbuf *) ptr,
-					second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
-		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = access_ok(VERIFY_WRITE, (ulong *) third,
-					sizeof(ulong)) ? 0 : -EFAULT;
-			if (ret)
-				break;
-			ret = do_shmat(first, (char *) ptr, second, &raddr);
-			if (ret)
-				break;
-			ret = put_user(raddr, (ulong *) third);
-			break;
-			}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat(first, (char *) ptr, second,
-					(ulong *) third);
-			break;
-		}
-		break;
-	case SHMDT:
-		ret = sys_shmdt((char *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget(first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
-		break;
-	}
-	return ret;
-}
 
 asmlinkage long microblaze_vfork(struct pt_regs *regs)
 {
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 31b32a6c5f4..216db817beb 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -121,7 +121,7 @@ ENTRY(sys_call_table)
 	.long sys_wait4
 	.long sys_swapoff		/* 115 */
 	.long sys_sysinfo
-	.long sys_ipc
+	.long sys_ni_syscall		/* old sys_ipc */
 	.long sys_fsync
 	.long sys_ni_syscall		/* sys_sigreturn_wrapper */
 	.long sys_clone		/* 120 */
-- 
cgit v1.2.3


From fadf2e60a6dc7267658fa0c9e3bef13c699c7e1f Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Thu, 23 Jul 2009 14:56:49 +1000
Subject: microblaze: Get module loading working

New reloc type R_MICROBLAZE_32_PCREL_LO requires a null handler (no work to do).

Remove legacy hack for broken linker pre gcc-4.1.1, that required us to extract
an offset from the code, add it to the addend, then rewrite the instruction.

Fixup the invalid reloc type error output.

Boot tested with the xilinx_emaclite ethernet driver.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/module.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
index 51414171326..93a3871ea54 100644
--- a/arch/microblaze/kernel/module.c
+++ b/arch/microblaze/kernel/module.c
@@ -57,7 +57,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
 	unsigned long int *location;
-	unsigned long int locoffs;
 	unsigned long int value;
 #if __GNUC__ < 4
 	unsigned long int old_value;
@@ -113,10 +112,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			break;
 
 		case R_MICROBLAZE_64_PCREL:
-			locoffs = (location[0] & 0xFFFF) << 16 |
+#if __GNUC__ < 4
+			old_value = (location[0] & 0xFFFF) << 16 |
 				(location[1] & 0xFFFF);
-			value -= (unsigned long int)(location) + 4 +
-				locoffs;
+			value -= old_value;
+#endif
+			value -= (unsigned long int)(location) + 4;
 			location[0] = (location[0] & 0xFFFF0000) |
 					(value >> 16);
 			location[1] = (location[1] & 0xFFFF0000) |
@@ -125,6 +126,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 				value);
 			break;
 
+		case R_MICROBLAZE_32_PCREL_LO:
+			pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+			break;
+
 		case R_MICROBLAZE_NONE:
 			pr_debug("R_MICROBLAZE_NONE\n");
 			break;
@@ -133,7 +138,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			printk(KERN_ERR "module %s: "
 				"Unknown relocation: %u\n",
 				module->name,
-				ELF32_R_TYPE(rela->r_info));
+				ELF32_R_TYPE(rela[i].r_info));
 			return -ENOEXEC;
 		}
 	}
-- 
cgit v1.2.3


From 679711b82f010b854c5d4d88472c7a20fdc2b5fe Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 23 Jul 2009 08:24:47 +0200
Subject: microblaze: Add support for R_MICROBLAZE_64_NONE

For example reiserfs use this relocation type.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/module.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
index 93a3871ea54..5a45b1adfef 100644
--- a/arch/microblaze/kernel/module.c
+++ b/arch/microblaze/kernel/module.c
@@ -130,6 +130,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
 			break;
 
+		case R_MICROBLAZE_64_NONE:
+			pr_debug("R_MICROBLAZE_NONE\n");
+			break;
+
 		case R_MICROBLAZE_NONE:
 			pr_debug("R_MICROBLAZE_NONE\n");
 			break;
-- 
cgit v1.2.3


From 65d3db0601509946fe0c9d2c7b12a5a62ca42e5e Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Fri, 24 Jul 2009 08:11:23 +0200
Subject: microblaze: Typo fix for cpu param inconsistency

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 2 +-
 arch/microblaze/kernel/cpu/cpuinfo-static.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index 153f57c57b6..c259786e7fa 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -22,7 +22,7 @@
 
 #define CI(c, p) { ci->c = PVR_##p(pvr); }
 #define err_printk(x) \
-	early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+	early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n");
 
 void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index 450ca6bb828..adb448f93d5 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -18,7 +18,7 @@ static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
 static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
-	early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+	early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
 
 void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 {
-- 
cgit v1.2.3


From 950b260ed21fdb6fa5f18485dabb0b03488431fa Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Fri, 24 Jul 2009 09:04:49 +0200
Subject: microblaze: Makefile cleanup

Reviewed the Makefile on request by Michal and this is the resulting changes.

o Use ':=' for assignmnet so we do not re-evaluate for each use
o Use $(shell echo xxx) to remove ""
o Replaced CFLAGS_KERNEL with KBUILD_CFLAGS
  The settings are equally relevant for modules and the linked kernel
o Dropped LDFLAGS_BLOB - it is no longer used
o Refactored assignmnets to libs-y and core-y
o Use MMU for the MMU specific extension. "MMUEXT" was hurting my eyes
  and I did not wanted it spread to m68k

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Makefile        | 35 ++++++++++++++++++-----------------
 arch/microblaze/kernel/Makefile |  2 +-
 2 files changed, 19 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d0bcf80a113..8439598d465 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -6,14 +6,16 @@ endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
-CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
-CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
-CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
-CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+CPU_VER   := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
+CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV   := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
 
 export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
 
 # Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
 
 # Work out HW multipler support.  This is icky.
 # 1. Spartan2 has no HW multiplers.
@@ -34,30 +36,29 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
-# The various CONFIG_XILINX cpu features options are integers 0/1/2...
-# rather than bools y/n
-
 # r31 holds current when in kernel mode
-CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS		:=
 LDFLAGS_vmlinux	:=
-LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
-LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
 
-head-y		:= arch/microblaze/kernel/head.o
-libs-y		+= arch/microblaze/lib/ $(LIBGCC)
-core-y		+= arch/microblaze/kernel/ arch/microblaze/mm/ \
-		   arch/microblaze/platform/
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/
+libs-y += $(LIBGCC)
+core-y += arch/microblaze/kernel/
+core-y += arch/microblaze/mm/
+core-y += arch/microblaze/platform/
 
-boot := arch/$(ARCH)/boot
+boot := arch/microblaze/boot
 
 # defines filename extension depending memory management type
 ifeq ($(CONFIG_MMU),)
-MMUEXT		:= -nommu
+MMU := -nommu
 endif
-export	MMUEXT
+
+export MMU
 
 all: linux.bin
 
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f4a5e19a20e..d487729683d 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
 
-obj-y	+= entry$(MMUEXT).o
+obj-y	+= entry$(MMU).o
-- 
cgit v1.2.3


From 505d62d073b528859b43bfb463a6ceaf3581469e Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc>
Date: Sun, 26 Jul 2009 14:57:54 +0200
Subject: avr32/lib: fix unaligned memcpy()

memcpy(p, unaligned, 4..) returns (p + num_of_unaligned_by_copied)
instead of p because p is not preserved in the unaligned case.

Noticed by Herbert Xu's superior parameter recycling coding technique
which let the md4 self-test fail on avr32.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/lib/memcpy.S | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S
index 0abb26142b6..93e74b6fcdb 100644
--- a/arch/avr32/lib/memcpy.S
+++ b/arch/avr32/lib/memcpy.S
@@ -24,8 +24,8 @@ memcpy:
 	brne	1f
 
 	/* At this point, "from" is word-aligned */
-2:	sub	r10, 4
-	mov	r9, r12
+2:	mov	r9, r12
+5:	sub	r10, 4
 	brlt	4f
 
 3:	ld.w	r8, r11++
@@ -59,4 +59,13 @@ memcpy:
 	st.b	r12++, r8
 	ld.ub	r8, r11++
 	st.b	r12++, r8
-	rjmp	2b
+	mov	r8, r12
+	add	pc, pc, r9
+	sub	r8, 1
+	nop
+	sub	r8, 1
+	nop
+	sub	r8, 1
+	nop
+	mov	r9, r8
+	rjmp	5b
-- 
cgit v1.2.3


From 251ab1a37d9ba810593d5fbf2482bc4ba773fab2 Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc>
Date: Sun, 26 Jul 2009 14:58:34 +0200
Subject: avr32/lib: fix unaligned memcpy where len < 4

in case of memcpy(p, unaligned, 1..3) we get 1..3 as the
return value instead of p

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/lib/memcpy.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S
index 93e74b6fcdb..c2ca49d705a 100644
--- a/arch/avr32/lib/memcpy.S
+++ b/arch/avr32/lib/memcpy.S
@@ -49,6 +49,7 @@ memcpy:
 
 	/* Handle unaligned "from" pointer */
 1:	sub	r10, 4
+	movlt	r9, r12
 	brlt	4b
 	add	r10, r9
 	lsl	r9, 2
-- 
cgit v1.2.3


From 92c548cd35d50df398f442b07021150094578460 Mon Sep 17 00:00:00 2001
From: Ben Nizette <ben@niasdigital.com>
Date: Mon, 20 Apr 2009 12:36:53 +1000
Subject: favr32: improve touchscreen response

The ezLCD+101 board (to which an favr-32 is fitted) has a long,
unshielded, nasty lead between the touch panel and the ads7843 touch
controller.  In order to get satisfactory response then, we need to
employ every noise-reduction trick in the driver's arsenal.  After
extensive fiddling I've found some good settings:

1) We keep vref on all the time to dramatically reduce settling times
(at the cost of a tiny increase in power consumption).

2) Despite 1 the settling time is still non-zero.  500uS is plenty of
time for the signals to settle

3) Despite 1 and 2 there's still a little bit of noise around.  By
setting a pen recheck delay we make the panel feel less touchy and
twitchy.

Someone with more time and patience myself might be able to tune this
numbers further but these settings are now perfectly acceptable for
normal use.

Tested on ezLCD+101 though should only improve response on other ezLCD+/
favr-32 boards too.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/boards/favr-32/setup.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 46c9b0a224c..75f19f47fb2 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -72,6 +72,10 @@ static struct ads7846_platform_data ads7843_data = {
 	.debounce_max		= 20,
 	.debounce_rep		= 4,
 	.debounce_tol		= 5,
+
+	.keep_vref_on		= true,
+	.settle_delay_usecs	= 500,
+	.penirq_recheck_delay_usecs = 100,
 };
 
 static struct spi_board_info __initdata spi1_board_info[] = {
-- 
cgit v1.2.3


From dfff0fa65ab15db45acd64b3189787d37ab163cd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 27 Jul 2009 20:53:22 +0900
Subject: sh: wire up clear_user_highpage() for sh4, convert sh7705.

This wires up clear_user_highpage() on SH-4 and subsequently converts the
SH7705 32kB cache mode over to using it. Now that the SH-4 implementation
handles all of the dcache purging directly in the aliasing case, there is
no need to do this in the default clear_page() implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h |   2 +-
 arch/sh/include/asm/page.h       |  12 +++--
 arch/sh/include/asm/pgtable.h    |   3 +-
 arch/sh/kernel/sh_ksyms_32.c     |   6 ---
 arch/sh/lib/clear_page.S         |  46 ------------------
 arch/sh/mm/Makefile_32           |   2 +-
 arch/sh/mm/pg-nommu.c            |   7 +--
 arch/sh/mm/pg-sh4.c              |  29 ++++++-----
 arch/sh/mm/pg-sh7705.c           | 102 ---------------------------------------
 9 files changed, 27 insertions(+), 182 deletions(-)
 delete mode 100644 arch/sh/mm/pg-sh7705.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 4c5462daa74..4e360114269 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -49,7 +49,7 @@ static inline void flush_kernel_dcache_page(struct page *page)
 	flush_dcache_page(page);
 }
 
-#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
+#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)) && !defined(CONFIG_CACHE_OFF)
 extern void copy_to_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len);
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index a31ab40040f..5208b7bfc24 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -56,21 +56,25 @@ pages_do_alias(unsigned long addr1, unsigned long addr2)
 	return (addr1 ^ addr2) & shm_align_mask;
 }
 
-extern void clear_page(void *to);
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, void *from);
 
+struct page;
+struct vm_area_struct;
+
 #if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
 	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
 	 defined(CONFIG_SH7705_CACHE_32KB))
-struct page;
-struct vm_area_struct;
 extern void clear_user_page(void *to, unsigned long address, struct page *page);
 extern void copy_user_page(void *to, void *from, unsigned long address,
 			   struct page *page);
-#if defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
 extern void copy_user_highpage(struct page *to, struct page *from,
 			       unsigned long vaddr, struct vm_area_struct *vma);
 #define __HAVE_ARCH_COPY_USER_HIGHPAGE
+extern void clear_user_highpage(struct page *page, unsigned long vaddr);
+#define clear_user_highpage	clear_user_highpage
 #endif
 #else
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index d9f68f9c3cb..bef3ab7fc09 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -141,7 +141,8 @@ extern void paging_init(void);
 extern void page_table_range_init(unsigned long start, unsigned long end,
 				  pgd_t *pgd);
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_CPU_SH4) && defined(CONFIG_MMU)
+#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
+    defined(CONFIG_SH7705_CACHE_32KB)) && defined(CONFIG_MMU)
 extern void kmap_coherent_init(void);
 #else
 #define kmap_coherent_init()	do { } while (0)
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index cec610888e2..8dbe26b17c4 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -101,11 +101,6 @@ EXPORT_SYMBOL(flush_cache_range);
 EXPORT_SYMBOL(flush_dcache_page);
 #endif
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
-	(defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB))
-EXPORT_SYMBOL(clear_user_page);
-#endif
-
 #ifdef CONFIG_MCOUNT
 DECLARE_EXPORT(mcount);
 #endif
@@ -114,7 +109,6 @@ EXPORT_SYMBOL(csum_partial_copy_generic);
 #ifdef CONFIG_IPV6
 EXPORT_SYMBOL(csum_ipv6_magic);
 #endif
-EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(_ebss);
diff --git a/arch/sh/lib/clear_page.S b/arch/sh/lib/clear_page.S
index 8342bfbde64..bee9817e055 100644
--- a/arch/sh/lib/clear_page.S
+++ b/arch/sh/lib/clear_page.S
@@ -8,52 +8,6 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 
-/*
- * clear_page
- * @to: P1 address
- *
- * void clear_page(void *to)
- */
-
-/*
- * r0 --- scratch
- * r4 --- to
- * r5 --- to + PAGE_SIZE
- */
-ENTRY(clear_page)
-	mov	r4,r5
-	mov.l	.Llimit,r0
-	add	r0,r5
-	mov	#0,r0
-	!
-1:
-#if defined(CONFIG_CPU_SH4)
-	movca.l	r0,@r4
-	mov	r4,r1
-#else
-	mov.l	r0,@r4
-#endif
-	add	#32,r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-	mov.l	r0,@-r4
-#if defined(CONFIG_CPU_SH4)
-	ocbwb	@r1
-#endif
-	cmp/eq	r5,r4
-	bf/s	1b
-	 add	#28,r4
-	!
-	rts
-	 nop
-
-	.balign 4
-.Llimit:	.long	(PAGE_SIZE-28)
-
 ENTRY(__clear_user)
 	!
 	mov	#0, r0
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index 986a1e05583..5c04bbb08d3 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -31,7 +31,7 @@ tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
 obj-y				+= $(tlb-y)
 ifndef CONFIG_CACHE_OFF
 obj-$(CONFIG_CPU_SH4)		+= pg-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB)	+= pg-sh7705.o
+obj-$(CONFIG_SH7705_CACHE_32KB)	+= pg-sh4.o
 endif
 endif
 
diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c
index 91ed4e695ff..7e33b486b7e 100644
--- a/arch/sh/mm/pg-nommu.c
+++ b/arch/sh/mm/pg-nommu.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/mm/pg-nommu.c
  *
- * clear_page()/copy_page() implementation for MMUless SH.
+ * copy_page()/__copy_user()/__clear_user() implementations for MMUless SH.
  *
  * Copyright (C) 2003  Paul Mundt
  *
@@ -20,11 +20,6 @@ void copy_page(void *to, void *from)
 	memcpy(to, from, PAGE_SIZE);
 }
 
-void clear_page(void *to)
-{
-	memset(to, 0, PAGE_SIZE);
-}
-
 __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
 {
 	memcpy(to, from, n);
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index f3c4b2a54fc..4d93070b822 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -2,7 +2,7 @@
  * arch/sh/mm/pg-sh4.c
  *
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2002 - 2007  Paul Mundt
+ * Copyright (C) 2002 - 2009  Paul Mundt
  *
  * Released under the terms of the GNU GPL v2.0.
  */
@@ -58,20 +58,6 @@ static inline void kunmap_coherent(struct page *page)
 	preempt_check_resched();
 }
 
-/*
- * clear_user_page
- * @to: P1 address
- * @address: U0 address to be mapped
- * @page: page (virt_to_page(to))
- */
-void clear_user_page(void *to, unsigned long address, struct page *page)
-{
-	clear_page(to);
-
-	if (pages_do_alias((unsigned long)to, address & PAGE_MASK))
-		__flush_wback_region(to, PAGE_SIZE);
-}
-
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long vaddr, void *dst, const void *src,
 		       unsigned long len)
@@ -128,3 +114,16 @@ void copy_user_highpage(struct page *to, struct page *from,
 	smp_wmb();
 }
 EXPORT_SYMBOL(copy_user_highpage);
+
+void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *kaddr = kmap_atomic(page, KM_USER0);
+
+	clear_page(kaddr);
+
+	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
+		__flush_wback_region(kaddr, PAGE_SIZE);
+
+	kunmap_atomic(kaddr, KM_USER0);
+}
+EXPORT_SYMBOL(clear_user_highpage);
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
deleted file mode 100644
index 684891b5c8c..00000000000
--- a/arch/sh/mm/pg-sh7705.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/sh/mm/pg-sh7705.c
- *
- * Copyright (C) 1999, 2000  Niibe Yutaka
- * Copyright (C) 2004  Alex Song
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/threads.h>
-#include <linux/fs.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-static void __flush_purge_virtual_region(void *p1, void *virt, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-	unsigned long p1_begin;
-
-
-	begin = L1_CACHE_ALIGN((unsigned long)virt);
-	end = L1_CACHE_ALIGN((unsigned long)virt + size);
-
-	p1_begin = (unsigned long)p1 & ~(L1_CACHE_BYTES - 1);
-
-	/* do this the slow way as we may not have TLB entries
-	 * for virt yet. */
-	for (v = begin; v < end; v += L1_CACHE_BYTES) {
-		unsigned long p;
-	        unsigned long ways, addr;
-
-		p = __pa(p1_begin);
-
-	        ways = current_cpu_data.dcache.ways;
-		addr = CACHE_OC_ADDRESS_ARRAY;
-
-		do {
-			unsigned long data;
-
-			addr |= (v & current_cpu_data.dcache.entry_mask);
-
-			data = ctrl_inl(addr);
-			if ((data & CACHE_PHYSADDR_MASK) ==
-			       (p & CACHE_PHYSADDR_MASK)) {
-				data &= ~(SH_CACHE_UPDATED|SH_CACHE_VALID);
-				ctrl_outl(data, addr);
-			}
-
-			addr += current_cpu_data.dcache.way_incr;
-		} while (--ways);
-
-		p1_begin += L1_CACHE_BYTES;
-	}
-}
-
-/*
- * clear_user_page
- * @to: P1 address
- * @address: U0 address to be mapped
- */
-void clear_user_page(void *to, unsigned long address, struct page *pg)
-{
-	if (pages_do_alias(address, (unsigned long)to))
-		__flush_purge_virtual_region(to,
-					     (void *)(address & 0xfffff000),
-					     PAGE_SIZE);
-
-	clear_page(to);
-	__flush_wback_region(to, PAGE_SIZE);
-}
-
-/*
- * copy_user_page
- * @to: P1 address
- * @from: P1 address
- * @address: U0 address to be mapped
- */
-void copy_user_page(void *to, void *from, unsigned long address, struct page *pg)
-{
-	if (pages_do_alias(address, (unsigned long)to))
-		__flush_purge_virtual_region(to,
-					     (void *)(address & 0xfffff000),
-					     PAGE_SIZE);
-
-	copy_page(to, from);
-	__flush_wback_region(to, PAGE_SIZE);
-}
-- 
cgit v1.2.3


From 221c007b028ebf663ebee4fc90483909547d92a7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 27 Jul 2009 20:55:46 +0900
Subject: sh: Rename arch/sh/lib/clear_page.S -> __clear_user.S.

Now that this only contains the __clear_user() function, rename it
accordingly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/Makefile       |   2 +-
 arch/sh/lib/__clear_user.S | 108 +++++++++++++++++++++++++++++++++++++++++++++
 arch/sh/lib/clear_page.S   | 108 ---------------------------------------------
 3 files changed, 109 insertions(+), 109 deletions(-)
 create mode 100644 arch/sh/lib/__clear_user.S
 delete mode 100644 arch/sh/lib/clear_page.S

(limited to 'arch')

diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index c2b28d8b2dd..a969b47c546 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -23,7 +23,7 @@ obj-y				+= io.o
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
-lib-$(CONFIG_MMU)		+= copy_page.o clear_page.o
+lib-$(CONFIG_MMU)		+= copy_page.o __clear_user.o
 lib-$(CONFIG_MCOUNT)		+= mcount.o
 lib-y				+= $(memcpy-y) $(udivsi3-y)
 
diff --git a/arch/sh/lib/__clear_user.S b/arch/sh/lib/__clear_user.S
new file mode 100644
index 00000000000..bee9817e055
--- /dev/null
+++ b/arch/sh/lib/__clear_user.S
@@ -0,0 +1,108 @@
+/*
+ * __clear_user_page, __clear_user, clear_page implementation of SuperH
+ *
+ * Copyright (C) 2001  Kaz Kojima
+ * Copyright (C) 2001, 2002  Niibe Yutaka
+ * Copyright (C) 2006  Paul Mundt
+ */
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+ENTRY(__clear_user)
+	!
+	mov	#0, r0
+	mov	#0xe0, r1	! 0xffffffe0
+	!
+	! r4..(r4+31)&~32 	   -------- not aligned	[ Area 0 ]
+	! (r4+31)&~32..(r4+r5)&~32 -------- aligned	[ Area 1 ]
+	! (r4+r5)&~32..r4+r5       -------- not aligned	[ Area 2 ]
+	!
+	! Clear area 0
+	mov	r4, r2
+	!
+	tst	r1, r5		! length < 32
+	bt	.Larea2		! skip to remainder
+	!
+	add	#31, r2
+	and	r1, r2
+	cmp/eq	r4, r2
+	bt	.Larea1
+	mov	r2, r3
+	sub	r4, r3
+	mov	r3, r7
+	mov	r4, r2
+	!
+.L0:	dt	r3
+0:	mov.b	r0, @r2
+	bf/s	.L0
+	 add	#1, r2
+	!
+	sub	r7, r5
+	mov	r2, r4
+.Larea1:
+	mov	r4, r3
+	add	r5, r3
+	and	r1, r3
+	cmp/hi	r2, r3
+	bf	.Larea2
+	!
+	! Clear area 1
+#if defined(CONFIG_CPU_SH4)
+1:	movca.l	r0, @r2
+#else
+1:	mov.l	r0, @r2
+#endif
+	add	#4, r2
+2:	mov.l	r0, @r2
+	add	#4, r2
+3:	mov.l	r0, @r2
+	add	#4, r2
+4:	mov.l	r0, @r2
+	add	#4, r2
+5:	mov.l	r0, @r2
+	add	#4, r2
+6:	mov.l	r0, @r2
+	add	#4, r2
+7:	mov.l	r0, @r2
+	add	#4, r2
+8:	mov.l	r0, @r2
+	add	#4, r2
+	cmp/hi	r2, r3
+	bt/s	1b
+	 nop
+	!
+	! Clear area 2
+.Larea2:
+	mov	r4, r3
+	add	r5, r3
+	cmp/hs	r3, r2
+	bt/s	.Ldone
+	 sub	r2, r3
+.L2:	dt	r3
+9:	mov.b	r0, @r2
+	bf/s	.L2
+	 add	#1, r2
+	!
+.Ldone:	rts
+	 mov	#0, r0	! return 0 as normal return
+
+	! return the number of bytes remained
+.Lbad_clear_user:
+	mov	r4, r0
+	add	r5, r0
+	rts
+	 sub	r2, r0
+
+.section __ex_table,"a"
+	.align 2
+	.long	0b, .Lbad_clear_user
+	.long	1b, .Lbad_clear_user
+	.long	2b, .Lbad_clear_user
+	.long	3b, .Lbad_clear_user
+	.long	4b, .Lbad_clear_user
+	.long	5b, .Lbad_clear_user
+	.long	6b, .Lbad_clear_user
+	.long	7b, .Lbad_clear_user
+	.long	8b, .Lbad_clear_user
+	.long	9b, .Lbad_clear_user
+.previous
diff --git a/arch/sh/lib/clear_page.S b/arch/sh/lib/clear_page.S
deleted file mode 100644
index bee9817e055..00000000000
--- a/arch/sh/lib/clear_page.S
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * __clear_user_page, __clear_user, clear_page implementation of SuperH
- *
- * Copyright (C) 2001  Kaz Kojima
- * Copyright (C) 2001, 2002  Niibe Yutaka
- * Copyright (C) 2006  Paul Mundt
- */
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-ENTRY(__clear_user)
-	!
-	mov	#0, r0
-	mov	#0xe0, r1	! 0xffffffe0
-	!
-	! r4..(r4+31)&~32 	   -------- not aligned	[ Area 0 ]
-	! (r4+31)&~32..(r4+r5)&~32 -------- aligned	[ Area 1 ]
-	! (r4+r5)&~32..r4+r5       -------- not aligned	[ Area 2 ]
-	!
-	! Clear area 0
-	mov	r4, r2
-	!
-	tst	r1, r5		! length < 32
-	bt	.Larea2		! skip to remainder
-	!
-	add	#31, r2
-	and	r1, r2
-	cmp/eq	r4, r2
-	bt	.Larea1
-	mov	r2, r3
-	sub	r4, r3
-	mov	r3, r7
-	mov	r4, r2
-	!
-.L0:	dt	r3
-0:	mov.b	r0, @r2
-	bf/s	.L0
-	 add	#1, r2
-	!
-	sub	r7, r5
-	mov	r2, r4
-.Larea1:
-	mov	r4, r3
-	add	r5, r3
-	and	r1, r3
-	cmp/hi	r2, r3
-	bf	.Larea2
-	!
-	! Clear area 1
-#if defined(CONFIG_CPU_SH4)
-1:	movca.l	r0, @r2
-#else
-1:	mov.l	r0, @r2
-#endif
-	add	#4, r2
-2:	mov.l	r0, @r2
-	add	#4, r2
-3:	mov.l	r0, @r2
-	add	#4, r2
-4:	mov.l	r0, @r2
-	add	#4, r2
-5:	mov.l	r0, @r2
-	add	#4, r2
-6:	mov.l	r0, @r2
-	add	#4, r2
-7:	mov.l	r0, @r2
-	add	#4, r2
-8:	mov.l	r0, @r2
-	add	#4, r2
-	cmp/hi	r2, r3
-	bt/s	1b
-	 nop
-	!
-	! Clear area 2
-.Larea2:
-	mov	r4, r3
-	add	r5, r3
-	cmp/hs	r3, r2
-	bt/s	.Ldone
-	 sub	r2, r3
-.L2:	dt	r3
-9:	mov.b	r0, @r2
-	bf/s	.L2
-	 add	#1, r2
-	!
-.Ldone:	rts
-	 mov	#0, r0	! return 0 as normal return
-
-	! return the number of bytes remained
-.Lbad_clear_user:
-	mov	r4, r0
-	add	r5, r0
-	rts
-	 sub	r2, r0
-
-.section __ex_table,"a"
-	.align 2
-	.long	0b, .Lbad_clear_user
-	.long	1b, .Lbad_clear_user
-	.long	2b, .Lbad_clear_user
-	.long	3b, .Lbad_clear_user
-	.long	4b, .Lbad_clear_user
-	.long	5b, .Lbad_clear_user
-	.long	6b, .Lbad_clear_user
-	.long	7b, .Lbad_clear_user
-	.long	8b, .Lbad_clear_user
-	.long	9b, .Lbad_clear_user
-.previous
-- 
cgit v1.2.3


From 0dfae7d5a21901b28ec0452d71be64adf5ea323e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 27 Jul 2009 21:30:17 +0900
Subject: sh: Use the now generic SH-4 clear/copy page ops for all MMU
 platforms.

Now that the SH-4 page clear/copy ops are generic, they can be used for
all platforms with CONFIG_MMU=y. SH-5 remains the odd one out, but it too
will gradually be converted over to using this interface.

SH-3 platforms which do not contain aliases will see no impact from this
change, while aliasing SH-3 platforms will get the same interface as
SH-4.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h |  15 -----
 arch/sh/include/asm/page.h       |  11 ++--
 arch/sh/include/asm/pgtable.h    |   3 +-
 arch/sh/mm/Makefile_32           |   6 +-
 arch/sh/mm/cache-sh5.c           |  17 +++++
 arch/sh/mm/pg-mmu.c              | 136 +++++++++++++++++++++++++++++++++++++++
 arch/sh/mm/pg-sh4.c              | 129 -------------------------------------
 7 files changed, 161 insertions(+), 156 deletions(-)
 create mode 100644 arch/sh/mm/pg-mmu.c
 delete mode 100644 arch/sh/mm/pg-sh4.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 4e360114269..4c85d55847c 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -49,7 +49,6 @@ static inline void flush_kernel_dcache_page(struct page *page)
 	flush_dcache_page(page);
 }
 
-#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)) && !defined(CONFIG_CACHE_OFF)
 extern void copy_to_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len);
@@ -57,20 +56,6 @@ extern void copy_to_user_page(struct vm_area_struct *vma,
 extern void copy_from_user_page(struct vm_area_struct *vma,
 	struct page *page, unsigned long vaddr, void *dst, const void *src,
 	unsigned long len);
-#else
-#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-		flush_icache_user_range(vma, page, vaddr, len);	\
-	} while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		flush_cache_page(vma, vaddr, page_to_pfn(page));\
-		memcpy(dst, src, len);				\
-	} while (0)
-#endif
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 5208b7bfc24..847eeabb908 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -63,22 +63,23 @@ extern void copy_page(void *to, void *from);
 struct page;
 struct vm_area_struct;
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
-	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
-	 defined(CONFIG_SH7705_CACHE_32KB))
+#if defined(CONFIG_CPU_SH5)
 extern void clear_user_page(void *to, unsigned long address, struct page *page);
 extern void copy_user_page(void *to, void *from, unsigned long address,
 			   struct page *page);
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+
+#elif defined(CONFIG_MMU)
 extern void copy_user_highpage(struct page *to, struct page *from,
 			       unsigned long vaddr, struct vm_area_struct *vma);
 #define __HAVE_ARCH_COPY_USER_HIGHPAGE
 extern void clear_user_highpage(struct page *page, unsigned long vaddr);
 #define clear_user_highpage	clear_user_highpage
-#endif
+
 #else
+
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
 #endif
 
 /*
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index bef3ab7fc09..ba2333216c5 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -141,8 +141,7 @@ extern void paging_init(void);
 extern void page_table_range_init(unsigned long start, unsigned long end,
 				  pgd_t *pgd);
 
-#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
-    defined(CONFIG_SH7705_CACHE_32KB)) && defined(CONFIG_MMU)
+#if defined(CONFIG_MMU) && !defined(CONFIG_CPU_SH5)
 extern void kmap_coherent_init(void);
 #else
 #define kmap_coherent_init()	do { } while (0)
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index 5c04bbb08d3..62e280734dc 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -15,7 +15,7 @@ endif
 obj-y			+= $(cache-y)
 
 mmu-y			:= tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o
+mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o pg-mmu.o
 
 obj-y			+= $(mmu-y)
 obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
@@ -29,10 +29,6 @@ tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
 tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
 tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
 obj-y				+= $(tlb-y)
-ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH4)		+= pg-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB)	+= pg-sh4.o
-endif
 endif
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 86762092508..3e2d7321b63 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -831,4 +831,21 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
 	else
 		sh64_clear_user_page_coloured(to, address);
 }
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long vaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	flush_cache_page(vma, vaddr, page_to_pfn(page));
+	memcpy(dst, src, len);
+	flush_icache_user_range(vma, page, vaddr, len);
+}
+
+void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+			 unsigned long vaddr, void *dst, const void *src,
+			 unsigned long len)
+{
+	flush_cache_page(vma, vaddr, page_to_pfn(page));
+	memcpy(dst, src, len);
+}
 #endif
diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
new file mode 100644
index 00000000000..356d2cdcb20
--- /dev/null
+++ b/arch/sh/mm/pg-mmu.c
@@ -0,0 +1,136 @@
+/*
+ * arch/sh/mm/pg-mmu.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+#define kmap_get_fixmap_pte(vaddr)                                     \
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
+static pte_t *kmap_coherent_pte;
+
+void __init kmap_coherent_init(void)
+{
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+	unsigned long vaddr;
+
+	/* cache the first coherent kmap pte */
+	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
+	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
+#endif
+}
+
+static inline void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr, flags;
+	pte_t pte;
+
+	inc_preempt_count();
+
+	idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
+	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
+	pte = mk_pte(page, PAGE_KERNEL);
+
+	local_irq_save(flags);
+	flush_tlb_one(get_asid(), vaddr);
+	local_irq_restore(flags);
+
+	update_mmu_cache(NULL, vaddr, pte);
+
+	set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte);
+
+	return (void *)vaddr;
+}
+
+static inline void kunmap_coherent(struct page *page)
+{
+	dec_preempt_count();
+	preempt_check_resched();
+}
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long vaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	    !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(vto, src, len);
+		kunmap_coherent(vto);
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			set_bit(PG_dcache_dirty, &page->flags);
+	}
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_cache_page(vma, vaddr, page_to_pfn(page));
+}
+
+void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+			 unsigned long vaddr, void *dst, const void *src,
+			 unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	    !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(dst, vfrom, len);
+		kunmap_coherent(vfrom);
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			set_bit(PG_dcache_dirty, &page->flags);
+	}
+}
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr, struct vm_area_struct *vma)
+{
+	void *vfrom, *vto;
+
+	vto = kmap_atomic(to, KM_USER1);
+
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
+	    !test_bit(PG_dcache_dirty, &from->flags)) {
+		vfrom = kmap_coherent(from, vaddr);
+		copy_page(vto, vfrom);
+		kunmap_coherent(vfrom);
+	} else {
+		vfrom = kmap_atomic(from, KM_USER0);
+		copy_page(vto, vfrom);
+		kunmap_atomic(vfrom, KM_USER0);
+	}
+
+	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+		__flush_wback_region(vto, PAGE_SIZE);
+
+	kunmap_atomic(vto, KM_USER1);
+	/* Make sure this page is cleared on other CPU's too before using it */
+	smp_wmb();
+}
+EXPORT_SYMBOL(copy_user_highpage);
+
+void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *kaddr = kmap_atomic(page, KM_USER0);
+
+	clear_page(kaddr);
+
+	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
+		__flush_wback_region(kaddr, PAGE_SIZE);
+
+	kunmap_atomic(kaddr, KM_USER0);
+}
+EXPORT_SYMBOL(clear_user_highpage);
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
deleted file mode 100644
index 4d93070b822..00000000000
--- a/arch/sh/mm/pg-sh4.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/sh/mm/pg-sh4.c
- *
- * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2002 - 2009  Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-#define kmap_get_fixmap_pte(vaddr)                                     \
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
-static pte_t *kmap_coherent_pte;
-
-void __init kmap_coherent_init(void)
-{
-	unsigned long vaddr;
-
-	/* cache the first coherent kmap pte */
-	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
-	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
-}
-
-static inline void *kmap_coherent(struct page *page, unsigned long addr)
-{
-	enum fixed_addresses idx;
-	unsigned long vaddr, flags;
-	pte_t pte;
-
-	inc_preempt_count();
-
-	idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
-	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
-	pte = mk_pte(page, PAGE_KERNEL);
-
-	local_irq_save(flags);
-	flush_tlb_one(get_asid(), vaddr);
-	local_irq_restore(flags);
-
-	update_mmu_cache(NULL, vaddr, pte);
-
-	set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte);
-
-	return (void *)vaddr;
-}
-
-static inline void kunmap_coherent(struct page *page)
-{
-	dec_preempt_count();
-	preempt_check_resched();
-}
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long vaddr, void *dst, const void *src,
-		       unsigned long len)
-{
-	if (page_mapped(page) && !test_bit(PG_dcache_dirty, &page->flags)) {
-		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-		memcpy(vto, src, len);
-		kunmap_coherent(vto);
-	} else {
-		memcpy(dst, src, len);
-		set_bit(PG_dcache_dirty, &page->flags);
-	}
-
-	if (vma->vm_flags & VM_EXEC)
-		flush_cache_page(vma, vaddr, page_to_pfn(page));
-}
-
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
-			 unsigned long vaddr, void *dst, const void *src,
-			 unsigned long len)
-{
-	if (page_mapped(page) && !test_bit(PG_dcache_dirty, &page->flags)) {
-		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-		memcpy(dst, vfrom, len);
-		kunmap_coherent(vfrom);
-	} else {
-		memcpy(dst, src, len);
-		set_bit(PG_dcache_dirty, &page->flags);
-	}
-}
-
-void copy_user_highpage(struct page *to, struct page *from,
-			unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *vfrom, *vto;
-
-	vto = kmap_atomic(to, KM_USER1);
-
-	if (page_mapped(from) && !test_bit(PG_dcache_dirty, &from->flags)) {
-		vfrom = kmap_coherent(from, vaddr);
-		copy_page(vto, vfrom);
-		kunmap_coherent(vfrom);
-	} else {
-		vfrom = kmap_atomic(from, KM_USER0);
-		copy_page(vto, vfrom);
-		kunmap_atomic(vfrom, KM_USER0);
-	}
-
-	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-		__flush_wback_region(vto, PAGE_SIZE);
-
-	kunmap_atomic(vto, KM_USER1);
-	/* Make sure this page is cleared on other CPU's too before using it */
-	smp_wmb();
-}
-EXPORT_SYMBOL(copy_user_highpage);
-
-void clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *kaddr = kmap_atomic(page, KM_USER0);
-
-	clear_page(kaddr);
-
-	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
-		__flush_wback_region(kaddr, PAGE_SIZE);
-
-	kunmap_atomic(kaddr, KM_USER0);
-}
-EXPORT_SYMBOL(clear_user_highpage);
-- 
cgit v1.2.3


From c640e1cb45cb9ff6b02f5f130a4f2a58ab9ebe55 Mon Sep 17 00:00:00 2001
From: Tomas Cech <sleep_walker@suse.cz>
Date: Mon, 27 Jul 2009 14:16:31 +0100
Subject: ARM: 5623/1: Treo680: ir shutdown typo fix
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

correct GPIO freed in treo680_irda_shutdown()

Signed-off-by: Tomáš ?ech <sleep_walker@suse.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/treo680.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index a06f19edebb..753ec4df17b 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -409,7 +409,7 @@ err1:
 
 static void treo680_irda_shutdown(struct device *dev)
 {
-	gpio_free(GPIO_NR_TREO680_AMP_EN);
+	gpio_free(GPIO_NR_TREO680_IR_EN);
 }
 
 static struct pxaficp_platform_data treo680_ficp_info = {
-- 
cgit v1.2.3


From 9e1b32caa525cb236e80e9c671e179bcecccc657 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 22 Jul 2009 15:44:28 +1000
Subject: mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()

mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()

Upcoming paches to support the new 64-bit "BookE" powerpc architecture
will need to have the virtual address corresponding to PTE page when
freeing it, due to the way the HW table walker works.

Basically, the TLB can be loaded with "large" pages that cover the whole
virtual space (well, sort-of, half of it actually) represented by a PTE
page, and which contain an "indirect" bit indicating that this TLB entry
RPN points to an array of PTEs from which the TLB can then create direct
entries. Thus, in order to invalidate those when PTE pages are deleted,
we need the virtual address to pass to tlbilx or tlbivax instructions.

The old trick of sticking it somewhere in the PTE page struct page sucks
too much, the address is almost readily available in all call sites and
almost everybody implemets these as macros, so we may as well add the
argument everywhere. I added it to the pmd and pud variants for consistency.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV]
Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/tlb.h             |  4 ++--
 arch/arm/include/asm/tlb.h               |  4 ++--
 arch/avr32/include/asm/pgalloc.h         |  2 +-
 arch/cris/include/asm/pgalloc.h          |  2 +-
 arch/frv/include/asm/pgalloc.h           |  4 ++--
 arch/frv/include/asm/pgtable.h           |  2 +-
 arch/ia64/include/asm/pgalloc.h          |  6 +++---
 arch/ia64/include/asm/tlb.h              | 12 ++++++------
 arch/m32r/include/asm/pgalloc.h          |  4 ++--
 arch/m68k/include/asm/motorola_pgalloc.h |  6 ++++--
 arch/m68k/include/asm/sun3_pgalloc.h     |  4 ++--
 arch/microblaze/include/asm/pgalloc.h    |  4 ++--
 arch/mips/include/asm/pgalloc.h          |  6 +++---
 arch/mn10300/include/asm/pgalloc.h       |  2 +-
 arch/parisc/include/asm/tlb.h            |  4 ++--
 arch/powerpc/include/asm/pgalloc-32.h    |  2 +-
 arch/powerpc/include/asm/pgalloc-64.h    |  4 ++--
 arch/powerpc/include/asm/pgalloc.h       |  6 +++---
 arch/powerpc/mm/hugetlbpage.c            |  4 ++--
 arch/s390/include/asm/tlb.h              |  9 ++++++---
 arch/sh/include/asm/pgalloc.h            |  4 ++--
 arch/sh/include/asm/tlb.h                |  6 +++---
 arch/sparc/include/asm/pgalloc_32.h      |  8 ++++----
 arch/sparc/include/asm/tlb_64.h          |  6 +++---
 arch/um/include/asm/pgalloc.h            |  4 ++--
 arch/um/include/asm/tlb.h                |  6 +++---
 arch/x86/include/asm/pgalloc.h           | 25 ++++++++++++++++++++++---
 arch/x86/mm/pgtable.c                    |  6 +++---
 arch/xtensa/include/asm/tlb.h            |  2 +-
 29 files changed, 91 insertions(+), 67 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h
index c13636575fb..42866759f3f 100644
--- a/arch/alpha/include/asm/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
  
 #endif
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 321c83e43a1..f41a6f57cd1 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
index 64082132394..92ecd8446ef 100644
--- a/arch/avr32/include/asm/pgalloc.h
+++ b/arch/avr32/include/asm/pgalloc.h
@@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h
index a1ba761d057..6da975db112 100644
--- a/arch/cris/include/asm/pgalloc.h
+++ b/arch/cris/include/asm/pgalloc.h
@@ -47,7 +47,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h
index 971e6addb00..416d19a632f 100644
--- a/arch/frv/include/asm/pgalloc.h
+++ b/arch/frv/include/asm/pgalloc.h
@@ -49,7 +49,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb),(pte));			\
@@ -62,7 +62,7 @@ do {							\
  */
 #define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *) 2); })
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 33233011b1c..22c60692b55 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -225,7 +225,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)		NULL
 #define pud_free(mm, x)				do { } while (0)
-#define __pud_free_tlb(tlb, x)			do { } while (0)
+#define __pud_free_tlb(tlb, x, address)		do { } while (0)
 
 /*
  * The "pud_xxx()" functions here are trivial for a folded two-level
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index b9ac1a6fc21..96a8d927db2 100644
--- a/arch/ia64/include/asm/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -48,7 +48,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 {
 	quicklist_free(0, NULL, pud);
 }
-#define __pud_free_tlb(tlb, pud)	pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, address)	pud_free((tlb)->mm, pud)
 #endif /* CONFIG_PGTABLE_4 */
 
 static inline void
@@ -67,7 +67,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	quicklist_free(0, NULL, pmd);
 }
 
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address)	pmd_free((tlb)->mm, pmd)
 
 static inline void
 pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
@@ -117,6 +117,6 @@ static inline void check_pgt_cache(void)
 	quicklist_trim(0, NULL, 25, 16);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
 
 #endif				/* _ASM_IA64_PGALLOC_H */
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
index 20d8a39680c..85d965cb19a 100644
--- a/arch/ia64/include/asm/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
@@ -236,22 +236,22 @@ do {							\
 	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
 } while (0)
 
-#define pte_free_tlb(tlb, ptep)				\
+#define pte_free_tlb(tlb, ptep, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pte_free_tlb(tlb, ptep);			\
+	__pte_free_tlb(tlb, ptep, address);		\
 } while (0)
 
-#define pmd_free_tlb(tlb, ptep)				\
+#define pmd_free_tlb(tlb, ptep, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pmd_free_tlb(tlb, ptep);			\
+	__pmd_free_tlb(tlb, ptep, address);		\
 } while (0)
 
-#define pud_free_tlb(tlb, pudp)				\
+#define pud_free_tlb(tlb, pudp, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pud_free_tlb(tlb, pudp);			\
+	__pud_free_tlb(tlb, pudp, address);		\
 } while (0)
 
 #endif /* _ASM_IA64_TLB_H */
diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
index f11a2b909cd..0fc73619897 100644
--- a/arch/m32r/include/asm/pgalloc.h
+++ b/arch/m32r/include/asm/pgalloc.h
@@ -58,7 +58,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, (pte))
 
 /*
  * allocating and freeing a pmd is trivial: the 1-entry pmd is
@@ -68,7 +68,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 
 #define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 #define pgd_populate(mm, pmd, pte)	BUG()
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index d08bf6261df..15ee4c74a9f 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -54,7 +54,8 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
 	__free_page(page);
 }
 
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+				  unsigned long address)
 {
 	pgtable_page_dtor(page);
 	cache_page(kmap(page));
@@ -73,7 +74,8 @@ static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	return free_pointer_table(pmd);
 }
 
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				 unsigned long address)
 {
 	return free_pointer_table(pmd);
 }
diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
index d4c83f14381..48d80d5a666 100644
--- a/arch/m68k/include/asm/sun3_pgalloc.h
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
@@ -32,7 +32,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
         __free_page(page);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
@@ -80,7 +80,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page
  * inside the pgd, so has no extra memory associated with it.
  */
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 59a757e46ba..b0131da1387 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -180,7 +180,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
 	__free_page(ptepage);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, (pte))
 
 #define pmd_populate(mm, pmd, pte)	(pmd_val(*(pmd)) = page_address(pte))
 
@@ -193,7 +193,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
  */
 #define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
 /*#define pmd_free(mm, x)			do { } while (0)*/
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 #define pgd_populate(mm, pmd, pte)	BUG()
 
 extern int do_check_pgt_cache(int, int);
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 1275831dda2..f705735feef 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -98,7 +98,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_pages(pte, PTE_ORDER);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
@@ -111,7 +111,7 @@ do {							\
  * inside the pgd, so has no extra memory associated with it.
  */
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 
 #endif
 
@@ -132,7 +132,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_pages((unsigned long)pmd, PMD_ORDER);
 }
 
-#define __pmd_free_tlb(tlb, x)	pmd_free((tlb)->mm, x)
+#define __pmd_free_tlb(tlb, x, addr)	pmd_free((tlb)->mm, x)
 
 #endif
 
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
index ec057e1bd4c..a19f11327cd 100644
--- a/arch/mn10300/include/asm/pgalloc.h
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -51,6 +51,6 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
 }
 
 
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
 
 #endif /* _ASM_PGALLOC_H */
diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h
index 383b1db310e..07924903989 100644
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -21,7 +21,7 @@ do {	if (!(tlb)->fullmm)	\
 
 #include <asm-generic/tlb.h>
 
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, addr)	pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, pte)
 
 #endif
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 0815eb40aca..c9500d666a1 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -16,7 +16,7 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
  */
 /* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
 #define pmd_free(mm, x) 		do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
 /* #define pgd_populate(mm, pmd, pte)      BUG() */
 
 #ifndef CONFIG_BOOKE
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index afda2bdd860..e6f069c4f71 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -118,11 +118,11 @@ static inline void pgtable_free(pgtable_free_t pgf)
 		kmem_cache_free(pgtable_cache[cachenum], p);
 }
 
-#define __pmd_free_tlb(tlb, pmd) 	\
+#define __pmd_free_tlb(tlb, pmd,addr)		      \
 	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
 		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
 #ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud)	\
+#define __pud_free_tlb(tlb, pud, addr)		      \
 	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
 		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
 #endif /* CONFIG_PPC_64K_PAGES */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 5d8480265a7..1730e5e298d 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -38,14 +38,14 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
 
 #ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage)	\
+#define __pte_free_tlb(tlb,ptepage,address)		\
 do { \
 	pgtable_page_dtor(ptepage); \
 	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-		PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+					PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
 } while (0)
 #else
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, (pte))
 #endif
 
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9920d6a7cf2..c46ef2ffa3d 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -305,7 +305,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 
 	pmd = pmd_offset(pud, start);
 	pud_clear(pud);
-	pmd_free_tlb(tlb, pmd);
+	pmd_free_tlb(tlb, pmd, start);
 }
 
 static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -348,7 +348,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
 	pud = pud_offset(pgd, start);
 	pgd_clear(pgd);
-	pud_free_tlb(tlb, pud);
+	pud_free_tlb(tlb, pud, start);
 }
 
 /*
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 3d8a96d39d9..81150b05368 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -96,7 +96,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
  * pte_free_tlb frees a pte table and clears the CRSTE for the
  * page table from the tlb.
  */
-static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+				unsigned long address)
 {
 	if (!tlb->fullmm) {
 		tlb->array[tlb->nr_ptes++] = pte;
@@ -113,7 +114,8 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
  * as the pgd. pmd_free_tlb checks the asce_limit against 2GB
  * to avoid the double free of the pmd in this case.
  */
-static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				unsigned long address)
 {
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 31))
@@ -134,7 +136,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
  * as the pgd. pud_free_tlb checks the asce_limit against 4TB
  * to avoid the double free of the pud in this case.
  */
-static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+				unsigned long address)
 {
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 42))
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db7104..89a482750a5 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -73,7 +73,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), (pte));			\
@@ -85,7 +85,7 @@ do {							\
  */
 
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,addr)	do { } while (0)
 
 static inline void check_pgt_cache(void)
 {
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index 9c16f737074..da8fe7ab872 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -91,9 +91,9 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
-#define pud_free_tlb(tlb, pudp)		pud_free((tlb)->mm, pudp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
index 681582d2696..ca2b34456c4 100644
--- a/arch/sparc/include/asm/pgalloc_32.h
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -44,8 +44,8 @@ BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
 BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
 #define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
 
-#define pmd_free(mm, pmd)	free_pmd_fast(pmd)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define pmd_free(mm, pmd)		free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd, addr)	pmd_free((tlb)->mm, pmd)
 
 BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
 #define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
@@ -62,7 +62,7 @@ BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
 #define pte_free_kernel(mm, pte)	BTFIXUP_CALL(free_pte_fast)(pte)
 
 BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
-#define pte_free(mm, pte)	BTFIXUP_CALL(pte_free)(pte)
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define pte_free(mm, pte)		BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, pte)
 
 #endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ee38e731bfa..dca406b9b6f 100644
--- a/arch/sparc/include/asm/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -100,9 +100,9 @@ static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
 }
 
 #define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
-#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
-#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
-#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr)
 
 #define tlb_migrate_finish(mm)	do { } while (0)
 #define tlb_start_vma(tlb, vma) do { } while (0)
diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h
index 718984359f8..32c8ce4e151 100644
--- a/arch/um/include/asm/pgalloc.h
+++ b/arch/um/include/asm/pgalloc.h
@@ -40,7 +40,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte, address)		\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb),(pte));			\
@@ -53,7 +53,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-#define __pmd_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+#define __pmd_free_tlb(tlb,x, address)   tlb_remove_page((tlb),virt_to_page(x))
 #endif
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h
index 5240fa1c5e0..660caedac9e 100644
--- a/arch/um/include/asm/tlb.h
+++ b/arch/um/include/asm/tlb.h
@@ -116,11 +116,11 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 		__tlb_remove_tlb_entry(tlb, ptep, address);	\
 	} while (0)
 
-#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep)
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
 
-#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp)
+#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr)
 
-#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
 
 #define tlb_migrate_finish(mm) do {} while (0)
 
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index dd14c54ac71..0e8c2a0fd92 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -46,7 +46,13 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
 	__free_page(pte);
 }
 
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+				  unsigned long address)
+{
+	___pte_free_tlb(tlb, pte);
+}
 
 static inline void pmd_populate_kernel(struct mm_struct *mm,
 				       pmd_t *pmd, pte_t *pte)
@@ -78,7 +84,13 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				  unsigned long adddress)
+{
+	___pmd_free_tlb(tlb, pmd);
+}
 
 #ifdef CONFIG_X86_PAE
 extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
@@ -108,7 +120,14 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 	free_page((unsigned long)pud);
 }
 
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+				  unsigned long address)
+{
+	___pud_free_tlb(tlb, pud);
+}
+
 #endif	/* PAGETABLE_LEVELS > 3 */
 #endif	/* PAGETABLE_LEVELS > 2 */
 
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 8e43bdd4545..af8f9650058 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -25,7 +25,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 	return pte;
 }
 
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 {
 	pgtable_page_dtor(pte);
 	paravirt_release_pte(page_to_pfn(pte));
@@ -33,14 +33,14 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 }
 
 #if PAGETABLE_LEVELS > 2
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
 {
 	paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pmd));
 }
 
 #if PAGETABLE_LEVELS > 3
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
 {
 	paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pud));
diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h
index 31c220faca0..0d766f9c108 100644
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -42,6 +42,6 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)		pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
 
 #endif	/* _XTENSA_TLB_H */
-- 
cgit v1.2.3


From 0e83815be719d3391bf5ea24b7fe696c07dbd417 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 27 Jul 2009 19:43:52 +0200
Subject: x86: fix section mismatch for i386 init code

Startup code for i386 in arch/x86/kernel/head_32.S is using the
reference variable initial_code that is located in the .cpuinit.data
section. If CONFIG_HOTPLUG_CPU is enabled, startup code is not in an
init section and can be called later too. In this case the reference
initial_code must be kept too. This patch fixes this. See below for
the section mismatch warning.

 WARNING: vmlinux.o(.cpuinit.data+0x0): Section mismatch in reference
 from the variable initial_code to the function
 .init.text:i386_start_kernel()
 The variable __cpuinitdata initial_code references
 a function __init i386_start_kernel().
 If i386_start_kernel is only used by initial_code then
 annotate i386_start_kernel with a matching annotation.

Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1248716632-26844-1-git-send-email-robert.richter@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/head_32.S | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 8663afb5653..0d98a01cbdb 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -602,7 +602,11 @@ ignore_int:
 #endif
 	iret
 
-.section .cpuinit.data,"wa"
+#ifndef CONFIG_HOTPLUG_CPU
+	__CPUINITDATA
+#else
+	__REFDATA
+#endif
 .align 4
 ENTRY(initial_code)
 	.long i386_start_kernel
-- 
cgit v1.2.3


From 4733fd328f14280900435d9dbae1487d110a4d56 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 28 Jul 2009 10:16:48 +1000
Subject: mm: Remove duplicate definitions in MIPS and SH

Those definitions are already provided by asm-generic

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mips/include/asm/pgalloc.h | 11 -----------
 arch/sh/include/asm/pgalloc.h   |  8 --------
 2 files changed, 19 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index f705735feef..3738f4b48cb 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -104,17 +104,6 @@ do {							\
 	tlb_remove_page((tlb), pte);			\
 } while (0)
 
-#ifdef CONFIG_32BIT
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
-
-#endif
-
 #ifdef CONFIG_64BIT
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 89a482750a5..63ca37bd9a9 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -79,14 +79,6 @@ do {							\
 	tlb_remove_page((tlb), (pte));			\
 } while (0)
 
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x,addr)	do { } while (0)
-
 static inline void check_pgt_cache(void)
 {
 	quicklist_trim(QUICK_PGD, NULL, 25, 16);
-- 
cgit v1.2.3


From 9a926d86b29a25456f1dd8c9df938e151b1c3978 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 27 Jul 2009 18:10:28 -0700
Subject: sparc64: Sign extend length arg to truncate syscalls when compat.

The first thing sys_truncate() and sys_ftruncate() do is sign extend
the unsigned length arg to a signed type.

Thanks to Benjamin Herrenschmidt for the tip.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sys32.S      | 2 ++
 arch/sparc/kernel/systbls_64.S | 4 ++--
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index f061c4dda9e..577f8fab8b6 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -138,6 +138,8 @@ SIGN2(sys32_splice, sys_splice, %o0, %o1)
 SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
 SIGN2(sys32_tee, sys_tee, %o0, %o1)
 SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
+SIGN1(sys32_truncate, sys_truncate, %o1)
+SIGN1(sys32_ftruncate, sys_ftruncate, %o1)
 
 	.globl		sys32_mmap2
 sys32_mmap2:
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 6b3ee88e253..2ee7250ba7a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -43,8 +43,8 @@ sys_call_table32:
 /*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
 	.word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd
 /*120*/	.word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
-	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
-/*130*/	.word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
+	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys32_truncate
+/*130*/	.word sys32_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
 	.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
 /*140*/	.word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
 	.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
-- 
cgit v1.2.3


From 3885123da8335dc6b67387e5e626acbffc56f664 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:50 +0900
Subject: swiotlb: remove unused swiotlb_alloc_boot()

Nobody uses swiotlb_alloc_boot().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/x86/kernel/pci-swiotlb.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 6af96ee4420..0ac7cd52478 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -13,11 +13,6 @@
 
 int swiotlb __read_mostly;
 
-void * __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
-{
-	return alloc_bootmem_low_pages(size);
-}
-
 void *swiotlb_alloc(unsigned order, unsigned long nslabs)
 {
 	return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-- 
cgit v1.2.3


From bb52196be37ce154ddc50b1f39496146d181cbe7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:51 +0900
Subject: swiotlb: remove unused swiotlb_alloc()

Nobody uses swiotlb_alloc().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/x86/kernel/pci-swiotlb.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 0ac7cd52478..ea675cfe76f 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -13,11 +13,6 @@
 
 int swiotlb __read_mostly;
 
-void *swiotlb_alloc(unsigned order, unsigned long nslabs)
-{
-	return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-}
-
 dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 {
 	return paddr;
-- 
cgit v1.2.3


From cf56e3f2e8a8d5b7bc719980869b0e7985c256f3 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:52 +0900
Subject: swiotlb: remove swiotlb_arch_range_needs_mapping

Nobody uses swiotlb_arch_range_needs_mapping().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/x86/kernel/pci-swiotlb.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index ea675cfe76f..165bd7f93bb 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -23,11 +23,6 @@ phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 	return baddr;
 }
 
-int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
-{
-	return 0;
-}
-
 static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 					dma_addr_t *dma_handle, gfp_t flags)
 {
-- 
cgit v1.2.3


From 02ca646e73f3cb9be69e339841b94edae675e248 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 23 Jul 2009 11:18:49 +0900
Subject: swiotlb: remove unnecessary swiotlb_bus_to_virt

swiotlb_bus_to_virt is unncessary; we can use swiotlb_bus_to_phys and
phys_to_virt instead.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/kernel/dma-swiotlb.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 68ccf11e4f1..41534ae2f58 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,16 +24,6 @@
 int swiotlb __read_mostly;
 unsigned int ppc_swiotlb_enable;
 
-void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr)
-{
-	unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr));
-	void *pageaddr = page_address(pfn_to_page(pfn));
-
-	if (pageaddr != NULL)
-		return pageaddr + (addr % PAGE_SIZE);
-	return NULL;
-}
-
 dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 {
 	return paddr + get_dma_direct_offset(hwdev);
-- 
cgit v1.2.3


From 99becaca86d184a4433e9fde879ff97303d7669f Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:54 +0900
Subject: x86: add dma_capable() to replace is_buffer_dma_capable()

dma_capable() eventually replaces is_buffer_dma_capable(), which tells
if a memory area is dma-capable or not. The problem of
is_buffer_dma_capable() is that it doesn't take a pointer to struct
device so it doesn't work for POWERPC.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/x86/include/asm/dma-mapping.h | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 1c3f9435f1c..adac59c8f69 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -55,6 +55,14 @@ extern int dma_set_mask(struct device *dev, u64 mask);
 extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 					dma_addr_t *dma_addr, gfp_t flag);
 
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size <= *dev->dma_mask;
+}
+
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	enum dma_data_direction dir)
-- 
cgit v1.2.3


From a4c2baa6e148adfb27beaf16b6fb6d465b5b3acb Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:55 +0900
Subject: x86: replace is_buffer_dma_capable() with dma_capable

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/x86/kernel/pci-dma.c     | 2 +-
 arch/x86/kernel/pci-gart_64.c | 5 ++---
 arch/x86/kernel/pci-nommu.c   | 2 +-
 3 files changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..3c945c0b350 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -147,7 +147,7 @@ again:
 		return NULL;
 
 	addr = page_to_phys(page);
-	if (!is_buffer_dma_capable(dma_mask, addr, size)) {
+	if (addr + size > dma_mask) {
 		__free_pages(page, get_order(size));
 
 		if (dma_mask < DMA_BIT_MASK(32) && !(flag & GFP_DMA)) {
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index d2e56b8f48e..98a827ee9ed 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -190,14 +190,13 @@ static void iommu_full(struct device *dev, size_t size, int dir)
 static inline int
 need_iommu(struct device *dev, unsigned long addr, size_t size)
 {
-	return force_iommu ||
-		!is_buffer_dma_capable(*dev->dma_mask, addr, size);
+	return force_iommu || !dma_capable(dev, addr, size);
 }
 
 static inline int
 nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 {
-	return !is_buffer_dma_capable(*dev->dma_mask, addr, size);
+	return !dma_capable(dev, addr, size);
 }
 
 /* Map a single continuous physical area into the IOMMU.
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index 71d412a09f3..c0a4222bf62 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -14,7 +14,7 @@
 static int
 check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 {
-	if (hwdev && !is_buffer_dma_capable(*hwdev->dma_mask, bus, size)) {
+	if (hwdev && !dma_capable(hwdev, bus, size)) {
 		if (*hwdev->dma_mask >= DMA_BIT_MASK(32))
 			printk(KERN_ERR
 			    "nommu_%s: overflow %Lx+%zu of device mask %Lx\n",
-- 
cgit v1.2.3


From a0b00ca84b3ecb9eebd62ad34880d8cc0d988c8a Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:56 +0900
Subject: ia64: add dma_capable() to replace is_buffer_dma_capable()

dma_capable() eventually replaces is_buffer_dma_capable(), which tells
if a memory area is dma-capable or not. The problem of
is_buffer_dma_capable() is that it doesn't take a pointer to struct
device so it doesn't work for POWERPC.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/ia64/include/asm/dma-mapping.h | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 5a61b5c2e18..88d0f860394 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -69,6 +69,14 @@ dma_set_mask (struct device *dev, u64 mask)
 	return 0;
 }
 
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size <= *dev->dma_mask;
+}
+
 extern int dma_get_cache_alignment(void);
 
 static inline void
-- 
cgit v1.2.3


From 9a937c91eea31c4b594ea49a2a23c57003e04987 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:57 +0900
Subject: powerpc: add dma_capable() to replace is_buffer_dma_capable()

dma_capable() eventually replaces is_buffer_dma_capable(), which tells
if a memory area is dma-capable or not. The problem of
is_buffer_dma_capable() is that it doesn't take a pointer to struct
device so it doesn't work for POWERPC.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index b44aaabdd1a..6ff1f8581d7 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -424,6 +424,19 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 #endif
 }
 
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size))
+		return 0;
+
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size <= *dev->dma_mask;
+}
+
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #ifdef CONFIG_NOT_COHERENT_CACHE
-- 
cgit v1.2.3


From 30945fdf6a08f52370dab3bc162e96c4b4e36082 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:59 +0900
Subject: powerpc: remove unncesary swiotlb_arch_address_needs_mapping

swiotlb doesn't use swiotlb_arch_address_needs_mapping(); it uses
dma_capalbe(). We can remove unnecessary
swiotlb_arch_address_needs_mapping().

We can remove swiotlb_addr_needs_map() and is_buffer_dma_capable() in
swiotlb_pci_addr_needs_map() too; dma_capable() handles the features
that both provide.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/kernel/dma-swiotlb.c | 27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 41534ae2f58..a3bbe02cda9 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -35,29 +35,12 @@ phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 	return baddr - get_dma_direct_offset(hwdev);
 }
 
-/*
- * Determine if an address needs bounce buffering via swiotlb.
- * Going forward I expect the swiotlb code to generalize on using
- * a dma_ops->addr_needs_map, and this function will move from here to the
- * generic swiotlb code.
- */
-int
-swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr,
-				   size_t size)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->addr_needs_map(hwdev, addr, size);
-}
-
 /*
  * Determine if an address is reachable by a pci device, or if we must bounce.
  */
 static int
 swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
 {
-	u64 mask = dma_get_mask(hwdev);
 	dma_addr_t max;
 	struct pci_controller *hose;
 	struct pci_dev *pdev = to_pci_dev(hwdev);
@@ -69,16 +52,9 @@ swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
 	if ((addr + size > max) | (addr < hose->dma_window_base_cur))
 		return 1;
 
-	return !is_buffer_dma_capable(mask, addr, size);
-}
-
-static int
-swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
-	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+	return 0;
 }
 
-
 /*
  * At the moment, all platforms that use this code only require
  * swiotlb to be used if we're operating on HIGHMEM.  Since
@@ -94,7 +70,6 @@ struct dma_mapping_ops swiotlb_dma_ops = {
 	.dma_supported = swiotlb_dma_supported,
 	.map_page = swiotlb_map_page,
 	.unmap_page = swiotlb_unmap_page,
-	.addr_needs_map = swiotlb_addr_needs_map,
 	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
 	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-- 
cgit v1.2.3


From 8d4f5339d1ee4027c07e6b2a1cfa9dc41b0d383b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:05:01 +0900
Subject: x86, IA64, powerpc: add phys_to_dma() and dma_to_phys()

This adds two functions, phys_to_dma() and dma_to_phys() to x86, IA64
and powerpc. swiotlb uses them. phys_to_dma() converts a physical
address to a dma address. dma_to_phys() does the opposite.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/ia64/include/asm/dma-mapping.h    | 10 ++++++++++
 arch/powerpc/include/asm/dma-mapping.h | 10 ++++++++++
 arch/x86/include/asm/dma-mapping.h     | 10 ++++++++++
 3 files changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 88d0f860394..f91829de329 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -77,6 +77,16 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 	return addr + size <= *dev->dma_mask;
 }
 
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr;
+}
+
 extern int dma_get_cache_alignment(void);
 
 static inline void
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 6ff1f8581d7..0c34371ec49 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -437,6 +437,16 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 	return addr + size <= *dev->dma_mask;
 }
 
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr + get_dma_direct_offset(dev);
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr - get_dma_direct_offset(dev);
+}
+
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #ifdef CONFIG_NOT_COHERENT_CACHE
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index adac59c8f69..0ee770d23d0 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -63,6 +63,16 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 	return addr + size <= *dev->dma_mask;
 }
 
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr;
+}
+
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	enum dma_data_direction dir)
-- 
cgit v1.2.3


From 8ab7ff42c9dd9231706a4ba7120eed22ff52a93b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:05:03 +0900
Subject: powerpc: remove unused swiotlb_phys_to_bus() and
 swiotlb_bus_to_phys()

phys_to_dma() and dma_to_phys() are used instead of
swiotlb_phys_to_bus() and swiotlb_bus_to_phys().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/kernel/dma-swiotlb.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index a3bbe02cda9..e8a57de85bc 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,17 +24,6 @@
 int swiotlb __read_mostly;
 unsigned int ppc_swiotlb_enable;
 
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
-	return paddr + get_dma_direct_offset(hwdev);
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-
-{
-	return baddr - get_dma_direct_offset(hwdev);
-}
-
 /*
  * Determine if an address is reachable by a pci device, or if we must bounce.
  */
-- 
cgit v1.2.3


From b683d42693c4e92b838117f5c6f7b90bfa1525c9 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:05:04 +0900
Subject: x86: remove unused swiotlb_phys_to_bus() and swiotlb_bus_to_phys()

phys_to_dma() and dma_to_phys() are used instead of
swiotlb_phys_to_bus() and swiotlb_bus_to_phys().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/x86/kernel/pci-swiotlb.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 165bd7f93bb..e8a35016115 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -13,16 +13,6 @@
 
 int swiotlb __read_mostly;
 
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
-	return paddr;
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-{
-	return baddr;
-}
-
 static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 					dma_addr_t *dma_handle, gfp_t flags)
 {
-- 
cgit v1.2.3


From 8666f8deec75a8dce15edd35ec33d29ef79cdb08 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 24 Jul 2009 17:30:50 +0200
Subject: mx27 defconfig update

- enable MX27_3DS and MX27LITE Board
- enable MXC nand driver
- enable UBI support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/mx27_defconfig | 270 +++++++++++++++++++++++++++-------------
 1 file changed, 185 insertions(+), 85 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 083516cd0d7..75263a83741 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 10:18:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Fri Jul 24 16:08:06 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -85,7 +84,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -99,6 +103,12 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,13 +148,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -153,25 +164,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_MX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 
@@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -238,7 +250,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -719,6 +770,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1168,6 +1266,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 42469ff014812880d7324285d165841f4b1814e7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 24 Jul 2009 17:31:03 +0200
Subject: mx3 defconfig update

- enable PCM043, MX31LILLY, ARMADILLO5X0 and MX35_3DS boards
- enable MXC nand driver
- enable UBI support
- disable cs89x0 support which broke all boards which do not have this chip

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/configs/mx3_defconfig | 151 ++++++++++++++++++++++++++++-------------
 1 file changed, 102 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 20ada526f6d..a4f9a2a8149 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:06:37 2009
+# Linux kernel version: 2.6.31-rc4
+# Tue Jul 28 14:11:34 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -86,7 +85,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -136,13 +145,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +161,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_MX2 is not set
 CONFIG_ARCH_MX3=y
 CONFIG_ARCH_MX31=y
+CONFIG_ARCH_MX35=y
 
 #
 # MX3 platforms:
@@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y
 CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_MX31_3DS=y
 CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_QONG=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_MX35_3DS=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARCH_HAS_RNGA=y
+CONFIG_ARCH_MXC_IOMUX_V3=y
 
 #
 # Processor Type
@@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+# CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -242,7 +261,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -528,7 +576,7 @@ CONFIG_MII=y
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
+CONFIG_DNET=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -537,8 +585,10 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -669,6 +719,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
@@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
+# CONFIG_AB3100_CORE is not set
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
 # CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
@@ -847,8 +900,11 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_ARM_UNWIND=y
@@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1119,6 +1170,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From a5b92cc348299c20be215b9f4b50853ecfbf3864 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:10 +0530
Subject: ARM: OMAP4: Add McBSP support

This patch creates McBSP support on OMAP4430 development platform. This patch
includes corresponding base address changes for OMAP4.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c             | 41 +++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mcbsp.h |  8 ++++++-
 arch/arm/plat-omap/mcbsp.c              |  2 +-
 3 files changed, 49 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..d49dfb5e931 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -169,6 +169,42 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 #define OMAP34XX_MCBSP_PDATA_SZ		0
 #endif
 
+static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
+	{
+		.phys_base      = OMAP44XX_MCBSP1_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
+		.rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP2_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
+		.rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP3_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
+		.rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP4_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
+		.rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+};
+#define OMAP44XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap44xx_mcbsp_pdata)
+
 static int __init omap2_mcbsp_init(void)
 {
 	if (cpu_is_omap2420())
@@ -177,6 +213,8 @@ static int __init omap2_mcbsp_init(void)
 		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
 	if (cpu_is_omap34xx())
 		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap44xx())
+		omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
@@ -192,6 +230,9 @@ static int __init omap2_mcbsp_init(void)
 	if (cpu_is_omap34xx())
 		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
 						OMAP34XX_MCBSP_PDATA_SZ);
+	if (cpu_is_omap44xx())
+		omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata,
+						OMAP44XX_MCBSP_PDATA_SZ);
 
 	return omap_mcbsp_init();
 }
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea7676..ec6f81e06d3 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -53,6 +53,11 @@
 #define OMAP34XX_MCBSP4_BASE	0x49026000
 #define OMAP34XX_MCBSP5_BASE	0x48096000
 
+#define OMAP44XX_MCBSP1_BASE	0x49022000
+#define OMAP44XX_MCBSP2_BASE	0x49024000
+#define OMAP44XX_MCBSP3_BASE	0x49026000
+#define OMAP44XX_MCBSP4_BASE	0x48074000
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
@@ -98,7 +103,8 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+	defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f3..e42fa7cfc79 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -191,7 +191,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
 		OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
 	}
-- 
cgit v1.2.3


From 085b54d99b8ee999e7905b8f16e201e0da8ba369 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:22 +0530
Subject: ARM: OMAP4: Add UART4 support

This patch adds UART4 support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/board-4430sdp.c |  2 +-
 arch/arm/mach-omap2/serial.c        | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477bd89c..7e1e721f032 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 };
 
 static struct omap_uart_config sdp4430_uart_config __initdata = {
-	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15bfe4..c0bea75f13f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -97,6 +97,16 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+#ifdef CONFIG_ARCH_OMAP4
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+#endif
 		.flags		= 0
 	}
 };
-- 
cgit v1.2.3


From 78a1a6d3411de1a8b0dc1cb92754b5f12f251912 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:30 +0530
Subject: ARM: OMAP4: Update the GPIO support

This patch adds GPIO support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/plat-omap/gpio.c | 249 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 198 insertions(+), 51 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..f0b71680ec5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -138,6 +138,32 @@
 #define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
+#define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_SYSCONFIG		0x0010
+#define OMAP4_GPIO_EOI			0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
+#define OMAP4_GPIO_IRQSTATUS0		0x002c
+#define OMAP4_GPIO_IRQSTATUS1		0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
+#define OMAP4_GPIO_IRQWAKEN0		0x0044
+#define OMAP4_GPIO_IRQWAKEN1		0x0048
+#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_CTRL			0x0130
+#define OMAP4_GPIO_OE			0x0134
+#define OMAP4_GPIO_DATAIN		0x0138
+#define OMAP4_GPIO_DATAOUT		0x013c
+#define OMAP4_GPIO_LEVELDETECT0		0x0140
+#define OMAP4_GPIO_LEVELDETECT1		0x0144
+#define OMAP4_GPIO_RISINGDETECT		0x0148
+#define OMAP4_GPIO_FALLINGDETECT	0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARDATAOUT		0x0190
+#define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
  * omap34xx specific GPIO registers
  */
@@ -386,11 +412,15 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_OE;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -468,6 +497,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			reg += OMAP24XX_GPIO_CLEARDATAOUT;
 		l = 1 << gpio;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_SETDATAOUT;
+		else
+			reg += OMAP4_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -511,11 +549,15 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_DATAIN;
+		break;
 #endif
 	default:
 		return -EINVAL;
@@ -544,7 +586,11 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCENABLE;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+#endif
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -581,7 +627,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 	reg = bank->base;
 
 	enc_time &= 0xff;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCINGTIME;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+#endif
 	__raw_writel(enc_time, reg);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -593,23 +643,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 {
 	void __iomem *base = bank->base;
 	u32 gpio_bit = 1 << gpio;
+	u32 val;
 
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_LOW);
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_HIGH);
-	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_RISING);
-	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_FALLING);
-
+	if (cpu_is_omap44xx()) {
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	} else {
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	}
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-		if (trigger != 0)
-			__raw_writel(1 << gpio, bank->base
+		if (cpu_is_omap44xx()) {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base+
+						OMAP4_GPIO_IRQWAKEN0);
+			else {
+				val = __raw_readl(bank->base +
+							OMAP4_GPIO_IRQWAKEN0);
+				__raw_writel(val & (~(1 << gpio)), bank->base +
+							 OMAP4_GPIO_IRQWAKEN0);
+			}
+		} else {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_SETWKUENA);
-		else
-			__raw_writel(1 << gpio, bank->base
+			else
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_CLEARWKUENA);
+		}
 	} else {
 		if (trigger != 0)
 			bank->enabled_non_wakeup_gpios |= gpio_bit;
@@ -617,9 +690,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	bank->level_mask =
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	if (cpu_is_omap44xx()) {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+	} else {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	}
 }
 #endif
 
@@ -783,11 +862,15 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUS0;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -798,12 +881,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		__raw_writel(gpio_mask, reg);
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
 	__raw_readl(reg);
-#endif
+	}
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -853,12 +940,17 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUSSET0;
+		mask = 0xffffffff;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -927,8 +1019,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-		defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -936,6 +1027,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
 		l = gpio_mask;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_IRQSTATUSSET0;
+		else
+			reg += OMAP4_GPIO_IRQSTATUSCLR0;
+		l = gpio_mask;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -1112,10 +1212,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
 #endif
 	while(1) {
 		u32 isr_saved, level_mask = 0;
@@ -1547,7 +1650,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
 		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1581,7 +1684,16 @@ static int __init _omap_gpio_init(void)
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
 			};
-
+		if (cpu_is_omap44xx()) {
+			__raw_writel(0xffffffff, bank->base +
+						OMAP4_GPIO_IRQSTATUSCLR0);
+			__raw_writew(0x0015, bank->base +
+						OMAP4_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base +
+						 OMAP4_GPIO_DEBOUNCENABLE);
+			/* Initialize interface clock ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+		} else {
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
@@ -1589,12 +1701,12 @@ static int __init _omap_gpio_init(void)
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		}
 			if (i < ARRAY_SIZE(non_wakeup_gpios))
 				bank->non_wakeup_gpios = non_wakeup_gpios[i];
 			gpio_count = 32;
 		}
 #endif
-
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1680,13 +1792,19 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1722,12 +1840,17 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1772,20 +1895,28 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		bank->saved_datain = __raw_readl(bank->base +
+							OMAP4_GPIO_DATAIN);
+		l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
+		l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		bank->saved_fallingdetect = l1;
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		c++;
 	}
@@ -1808,33 +1939,49 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
 				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP4_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
 #endif
 		/* Check if any of the non-wakeup interrupt GPIOs have changed
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+			old0 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			old1 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
 #endif
 		}
 	}
-- 
cgit v1.2.3


From 9cef7492696a416663b4edb953a4eade8517ebeb Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 29 Jul 2009 00:12:17 +0900
Subject: sh: update_mmu_cache() consolidation.

This splits out a separate __update_cache()/__update_tlb() for
update_mmu_cache() to wrap in to. This lets us share the common
__update_cache() bits while keeping special __update_tlb() handling
broken out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/pgtable.h | 15 +++++++++++++--
 arch/sh/mm/pg-mmu.c           | 21 +++++++++++++++++++++
 arch/sh/mm/tlb-nommu.c        |  9 ++++++---
 arch/sh/mm/tlb-pteaex.c       | 13 ++++++-------
 arch/sh/mm/tlb-sh3.c          | 29 ++++++-----------------------
 arch/sh/mm/tlb-sh4.c          | 29 ++++++-----------------------
 arch/sh/mm/tlbflush_64.c      | 25 +++++++++----------------
 7 files changed, 67 insertions(+), 74 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index ba2333216c5..43ef3e99fdd 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -134,8 +134,19 @@ typedef pte_t *pte_addr_t;
 #define pgtable_cache_init()	do { } while (0)
 
 struct vm_area_struct;
-extern void update_mmu_cache(struct vm_area_struct * vma,
-			     unsigned long address, pte_t pte);
+
+extern void __update_cache(struct vm_area_struct *vma,
+			   unsigned long address, pte_t pte);
+extern void __update_tlb(struct vm_area_struct *vma,
+			 unsigned long address, pte_t pte);
+
+static inline void
+update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+	__update_cache(vma, address, pte);
+	__update_tlb(vma, address, pte);
+}
+
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern void paging_init(void);
 extern void page_table_range_init(unsigned long start, unsigned long end,
diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
index 356d2cdcb20..8602f68af4c 100644
--- a/arch/sh/mm/pg-mmu.c
+++ b/arch/sh/mm/pg-mmu.c
@@ -134,3 +134,24 @@ void clear_user_highpage(struct page *page, unsigned long vaddr)
 	kunmap_atomic(kaddr, KM_USER0);
 }
 EXPORT_SYMBOL(clear_user_highpage);
+
+void __update_cache(struct vm_area_struct *vma,
+		    unsigned long address, pte_t pte)
+{
+	struct page *page;
+	unsigned long pfn = pte_pfn(pte);
+
+	if (!boot_cpu_data.dcache.n_aliases)
+		return;
+
+	page = pfn_to_page(pfn);
+	if (pfn_valid(pfn) && page_mapping(page)) {
+		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+		if (dirty) {
+			unsigned long addr = (unsigned long)page_address(page);
+
+			if (pages_do_alias(addr, address & PAGE_MASK))
+				__flush_wback_region((void *)addr, PAGE_SIZE);
+		}
+	}
+}
diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c
index 71c742b5aee..0ef5429943d 100644
--- a/arch/sh/mm/tlb-nommu.c
+++ b/arch/sh/mm/tlb-nommu.c
@@ -46,10 +46,13 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	BUG();
 }
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+}
+
+void __update_cache(struct vm_area_struct *vma,
+		    unsigned long address, pte_t pte)
 {
-	BUG();
 }
 
 void __init page_table_range_init(unsigned long start, unsigned long end,
diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
index c39b7736335..9aabd313ced 100644
--- a/arch/sh/mm/tlb-pteaex.c
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -16,15 +16,14 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
-	unsigned long flags;
-	unsigned long pteval;
-	unsigned long vpn;
+	unsigned long flags, pteval, vpn;
 
-	/* Ptrace may call this routine. */
-	if (vma && current->active_mm != vma->vm_mm)
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (current->active_mm != vma->vm_mm)
 		return;
 
 	local_irq_save(flags);
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 9b8459c74ab..425f1f23cf9 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -27,32 +27,16 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
-	unsigned long flags;
-	unsigned long pteval;
-	unsigned long vpn;
-	unsigned long pfn = pte_pfn(pte);
-	struct page *page;
+	unsigned long flags, pteval, vpn;
 
-	/* Ptrace may call this routine. */
-	if (vma && current->active_mm != vma->vm_mm)
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (current->active_mm != vma->vm_mm)
 		return;
 
-	page = pfn_to_page(pfn);
-	if (pfn_valid(pfn) && page_mapping(page)) {
-#if defined(CONFIG_SH7705_CACHE_32KB)
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-		if (dirty) {
-			unsigned long addr = (unsigned long)page_address(page);
-
-			if (pages_do_alias(addr, address & PAGE_MASK))
-				__flush_wback_region((void *)addr, PAGE_SIZE);
-		}
-#endif
-	}
-
 	local_irq_save(flags);
 
 	/* Set PTEH register */
@@ -93,4 +77,3 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	for (i = 0; i < ways; i++)
 		ctrl_outl(data, addr + (i << 8));
 }
-
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index cf50082d243..81199f1e594 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -15,33 +15,16 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-void update_mmu_cache(struct vm_area_struct * vma,
-		      unsigned long address, pte_t pte)
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
-	unsigned long flags;
-	unsigned long pteval;
-	unsigned long vpn;
-	unsigned long pfn = pte_pfn(pte);
-	struct page *page;
+	unsigned long flags, pteval, vpn;
 
-	/* Ptrace may call this routine. */
-	if (vma && current->active_mm != vma->vm_mm)
+	/*
+	 * Handle debugger faulting in for debugee.
+	 */
+	if (current->active_mm != vma->vm_mm)
 		return;
 
-	page = pfn_to_page(pfn);
-	if (pfn_valid(pfn) && page_mapping(page)) {
-#ifndef CONFIG_SMP
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-		if (dirty) {
-
-			unsigned long addr = (unsigned long)page_address(page);
-
-			if (pages_do_alias(addr, address & PAGE_MASK))
-				__flush_wback_region((void *)addr, PAGE_SIZE);
-		}
-#endif
-	}
-
 	local_irq_save(flags);
 
 	/* Set PTEH register */
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index 3ce40ea3482..f2e44e9ffb7 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -329,22 +329,6 @@ do_sigbus:
 		goto no_context;
 }
 
-void update_mmu_cache(struct vm_area_struct * vma,
-			unsigned long address, pte_t pte)
-{
-	/*
-	 * This appears to get called once for every pte entry that gets
-	 * established => I don't think it's efficient to try refilling the
-	 * TLBs with the pages - some may not get accessed even.  Also, for
-	 * executable pages, it is impossible to determine reliably here which
-	 * TLB they should be mapped into (or both even).
-	 *
-	 * So, just do nothing here and handle faults on demand.  In the
-	 * TLBMISS handling case, the refill is now done anyway after the pte
-	 * has been fixed up, so that deals with most useful cases.
-	 */
-}
-
 void local_flush_tlb_one(unsigned long asid, unsigned long page)
 {
 	unsigned long long match, pteh=0, lpage;
@@ -482,3 +466,12 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
         /* FIXME: Optimize this later.. */
         flush_tlb_all();
 }
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+}
+
+void __update_cache(struct vm_area_struct *vma,
+		    unsigned long address, pte_t pte)
+{
+}
-- 
cgit v1.2.3


From 73ba651fc246fcc3e446da4155e0425b4219d2c4 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 24 Jul 2009 09:57:33 +0200
Subject: x86: Export kmap_atomic_prot() needed for TTM.

This functionality is needed to kmap_atomic() highmem pages that may
potentially have or are about to set up other mappings with
non-standard caching attributes.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 arch/x86/mm/highmem_32.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e8191..2112ed55e7e 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -103,6 +103,7 @@ EXPORT_SYMBOL(kmap);
 EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_prot);
 
 void __init set_highmem_pages_init(void)
 {
-- 
cgit v1.2.3


From 3ed6e129390fb872c3b7e05a232e5d380fbdfb48 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 29 Jul 2009 22:06:58 +0900
Subject: sh: Handle a NULL vma in __update_tlb() for the fast-path.

The TLB miss fast-path presently calls in to update_mmu_cache() to
set up the entry, and does so with a NULL vma. Check for vma validity
in the __update_tlb() ptrace checks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/tlb-pteaex.c | 2 +-
 arch/sh/mm/tlb-sh3.c    | 2 +-
 arch/sh/mm/tlb-sh4.c    | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/tlb-pteaex.c b/arch/sh/mm/tlb-pteaex.c
index 9aabd313ced..409b7c2b4b9 100644
--- a/arch/sh/mm/tlb-pteaex.c
+++ b/arch/sh/mm/tlb-pteaex.c
@@ -23,7 +23,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	/*
 	 * Handle debugger faulting in for debugee.
 	 */
-	if (current->active_mm != vma->vm_mm)
+	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
 	local_irq_save(flags);
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 425f1f23cf9..ace8e6d2f59 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -34,7 +34,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	/*
 	 * Handle debugger faulting in for debugee.
 	 */
-	if (current->active_mm != vma->vm_mm)
+	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
 	local_irq_save(flags);
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index 81199f1e594..7d3c63e707a 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -22,7 +22,7 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 	/*
 	 * Handle debugger faulting in for debugee.
 	 */
-	if (current->active_mm != vma->vm_mm)
+	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
 	local_irq_save(flags);
-- 
cgit v1.2.3


From 82b242214b6f5b96eb9b76452ac6e2b67dd81abd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 29 Jul 2009 22:43:58 +0900
Subject: Revert "sh: Bump the earlytimer bits back to time_init()."

This reverts commit 1d29ebebcb951ab6b04d22807cafb24b893310a2.

Bumping up the earlytimer initialization causes IRQs to be enabled too
early, which blows up lockdep:

...
NR_IRQS:256 nr_irqs:256
------------[ cut here ]------------
Badness at kernel/lockdep.c:2128

Pid : 0, Comm:          swapper
CPU : 0                 Not tainted  (2.6.31-rc3-00205-g3ed6e12-dirty #2443)

PC is at trace_hardirqs_on_caller+0x48/0x10c
PR is at trace_hardirqs_on_caller+0x3c/0x10c
...

Revert it back to late_time_init time, which fixes up lockdep.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/time.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index d2424b068b7..7f95f479060 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -92,6 +92,21 @@ module_init(rtc_generic_init);
 
 void (*board_time_init)(void);
 
+static void __init sh_late_time_init(void)
+{
+	/*
+	 * Make sure all compiled-in early timers register themselves.
+	 *
+	 * Run probe() for two "earlytimer" devices, these will be the
+	 * clockevents and clocksource devices respectively. In the event
+	 * that only a clockevents device is available, we -ENODEV on the
+	 * clocksource and the jiffies clocksource is used transparently
+	 * instead. No error handling is necessary here.
+	 */
+	early_platform_driver_register_all("earlytimer");
+	early_platform_driver_probe("earlytimer", 2, 0);
+}
+
 void __init time_init(void)
 {
 	if (board_time_init)
@@ -108,15 +123,5 @@ void __init time_init(void)
 	local_timer_setup(smp_processor_id());
 #endif
 
-	/*
-	 * Make sure all compiled-in early timers register themselves.
-	 *
-	 * Run probe() for two "earlytimer" devices, these will be the
-	 * clockevents and clocksource devices respectively. In the event
-	 * that only a clockevents device is available, we -ENODEV on the
-	 * clocksource and the jiffies clocksource is used transparently
-	 * instead. No error handling is necessary here.
-	 */
-	early_platform_driver_register_all("earlytimer");
-	early_platform_driver_probe("earlytimer", 2, 0);
+	late_time_init = sh_late_time_init;
 }
-- 
cgit v1.2.3


From fd78a76aefb5bf28a11d6960d29e03a11db62320 Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Wed, 29 Jul 2009 23:01:24 +0900
Subject: sh: Rework irqflags tracing to fix up CONFIG_PROVE_LOCKING.

This cleans up the irqflags tracing code quite a bit and ties it
in to various missing callsites that caused an imbalance when
CONFIG_PROVE_LOCKING was enabled.

Previously this was catching on:

 987 #ifdef CONFIG_PROVE_LOCKING
 988     DEBUG_LOCKS_WARN_ON(!p->hardirqs_enabled);
 989     DEBUG_LOCKS_WARN_ON(!p->softirqs_enabled);
 990 #endif
 991     retval = -EAGAIN;

with hardirqs being doubly enabled, and subsequently bailing out
with the following call trace:

	Call trace:
	[<88035224>] __lock_acquire+0x616/0x6a6
	[<88015a8c>] do_fork+0xf8/0x2b0
	[<880331ec>] trace_hardirqs_on_caller+0xd4/0x114
	[<88241074>] _spin_unlock_irq+0x20/0x64
	[<88035224>] __lock_acquire+0x616/0x6a6
	[<8800386c>] kernel_thread+0x48/0x70
	[<88024ecc>] ____call_usermodehelper+0x0/0x110
	[<88024ecc>] ____call_usermodehelper+0x0/0x110
	[<88003894>] kernel_thread_helper+0x0/0x14
	[<88024bac>] __call_usermodehelper+0x38/0x70
	[<88025dc0>] worker_thread+0x150/0x274
	[<88035b9c>] lock_release+0x0/0x198
	[<88024b74>] __call_usermodehelper+0x0/0x70
	[<88028cf0>] autoremove_wake_function+0x0/0x30
	[<88028bf2>] kthread+0x3e/0x70
	[<88025c70>] worker_thread+0x0/0x274
	[<8800389c>] kernel_thread_helper+0x8/0x14
	[<88028bb4>] kthread+0x0/0x70
	[<88003894>] kernel_thread_helper+0x0/0x14

Reported-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug              |  2 +-
 arch/sh/include/asm/entry-macros.S | 72 ++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/entry-common.S      | 63 +++++++++------------------------
 arch/sh/kernel/io_trapped.c        |  7 ++--
 4 files changed, 93 insertions(+), 51 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index b440fd93671..a6dce41296e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -38,7 +38,7 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
 				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
 				CPU_SUBTYPE_SH7343
-	default "0xffea0000" if CPU_SUBTYPE_SH7785
+	default "0xffeb0000" if CPU_SUBTYPE_SH7785
 	default "0xffeb0000" if CPU_SUBTYPE_SH7786
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 3a4752a6572..1bdd93891cd 100644
--- a/arch/sh/include/asm/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
@@ -31,6 +31,78 @@
 #endif	
 	.endm
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+	.macro	TRACE_IRQS_ON
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+	mov.l	r2, @-r15
+	mov.l	r3, @-r15
+	mov.l	r4, @-r15
+	mov.l	r5, @-r15
+	mov.l	r6, @-r15
+	mov.l	r7, @-r15
+
+	mov.l   7834f, r0
+	jsr	@r0
+	 nop
+
+	mov.l	@r15+, r7
+	mov.l	@r15+, r6
+	mov.l	@r15+, r5
+	mov.l	@r15+, r4
+	mov.l	@r15+, r3
+	mov.l	@r15+, r2
+	mov.l	@r15+, r1
+	mov.l	@r15+, r0
+	mov.l	7834f, r0
+
+	bra	7835f
+	 nop
+	.balign	4
+7834:	.long	trace_hardirqs_on
+7835:
+	.endm
+	.macro	TRACE_IRQS_OFF
+
+	mov.l	r0, @-r15
+	mov.l	r1, @-r15
+	mov.l	r2, @-r15
+	mov.l	r3, @-r15
+	mov.l	r4, @-r15
+	mov.l	r5, @-r15
+	mov.l	r6, @-r15
+	mov.l	r7, @-r15
+
+	mov.l	7834f, r0
+	jsr	@r0
+	 nop
+
+	mov.l	@r15+, r7
+	mov.l	@r15+, r6
+	mov.l	@r15+, r5
+	mov.l	@r15+, r4
+	mov.l	@r15+, r3
+	mov.l	@r15+, r2
+	mov.l	@r15+, r1
+	mov.l	@r15+, r0
+	mov.l	7834f, r0
+
+	bra	7835f
+	 nop
+	.balign	4
+7834:	.long	trace_hardirqs_off
+7835:
+	.endm
+
+#else
+	.macro	TRACE_IRQS_ON
+	.endm
+
+	.macro	TRACE_IRQS_OFF
+	.endm
+#endif
+
 #if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
 # define PREF(x)	pref	@x
 #else
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index d62175650c5..fc26ccd8278 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -45,7 +45,7 @@
  */
 
 #if defined(CONFIG_PREEMPT)
-#  define preempt_stop()	cli
+#  define preempt_stop()	cli ; TRACE_IRQS_OFF
 #else
 #  define preempt_stop()
 #  define resume_kernel		__restore_all
@@ -55,11 +55,7 @@
 	.align	2
 ENTRY(exception_error)
 	!
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_ON
 	sti
 	mov.l	1f, r0
 	jmp	@r0
@@ -67,22 +63,23 @@ ENTRY(exception_error)
 
 	.align	2
 1:	.long	do_exception_error
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:	.long	trace_hardirqs_on
-#endif
 
 	.align	2
 ret_from_exception:
 	preempt_stop()
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	4f, r0
-	jsr	@r0
-	 nop
-#endif
 ENTRY(ret_from_irq)
 	!
 	mov	#OFF_SR, r0
 	mov.l	@(r0,r15), r0	! get status register
+
+	shlr2	r0
+	and	#0x3c, r0
+	cmp/eq	#0x3c, r0
+	bt	9f
+	TRACE_IRQS_ON
+9:
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0	! get status register
 	shll	r0
 	shll	r0		! kernel space?
 	get_current_thread_info r8, r0
@@ -125,11 +122,7 @@ noresched:
 ENTRY(resume_userspace)
 	! r8: current_thread_info
 	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_OfF
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
 	tst	#(_TIF_WORK_MASK & 0xff), r0
 	bt/s	__restore_all
@@ -156,11 +149,7 @@ work_resched:
 	jsr	@r1				! schedule
 	 nop
 	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_OFF
 	!
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
 	tst	#(_TIF_WORK_MASK & 0xff), r0
@@ -172,10 +161,6 @@ work_resched:
 1:	.long	schedule
 2:	.long	do_notify_resume
 3:	.long	resume_userspace
-#ifdef CONFIG_TRACE_IRQFLAGS
-4:	.long	trace_hardirqs_on
-5:	.long	trace_hardirqs_off
-#endif
 
 	.align	2
 syscall_exit_work:
@@ -184,11 +169,7 @@ syscall_exit_work:
 	tst	#(_TIF_WORK_SYSCALL_MASK & 0xff), r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_ON
 	sti
 	mov	r15, r4
 	mov.l	8f, r0			! do_syscall_trace_leave
@@ -321,11 +302,7 @@ ENTRY(system_call)
 	bt/s	debug_trap		! it's a debug trap..
 	 nop
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	5f, r10
-	jsr	@r10
-	 nop
-#endif
+	TRACE_IRQS_ON
 	sti
 
 	!
@@ -355,11 +332,7 @@ syscall_call:
 	!
 syscall_exit:
 	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	6f, r0
-	jsr	@r0
-	 nop
-#endif
+	TRACE_IRQS_OFF
 	!
 	get_current_thread_info r8, r0
 	mov.l	@(TI_FLAGS,r8), r0		! current_thread_info->flags
@@ -377,9 +350,5 @@ syscall_exit:
 #endif
 2:	.long	NR_syscalls
 3:	.long	sys_call_table
-#ifdef CONFIG_TRACE_IRQFLAGS
-5:	.long	trace_hardirqs_on
-6:	.long	trace_hardirqs_off
-#endif
 7:	.long	do_syscall_trace_enter
 8:	.long	do_syscall_trace_leave
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 77dfecb6437..e27a19e1f46 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -112,14 +112,15 @@ void __iomem *match_trapped_io_handler(struct list_head *list,
 	struct trapped_io *tiop;
 	struct resource *res;
 	int k, len;
+	unsigned long flags;
 
-	spin_lock_irq(&trapped_lock);
+	spin_lock_irqsave(&trapped_lock, flags);
 	list_for_each_entry(tiop, list, list) {
 		voffs = 0;
 		for (k = 0; k < tiop->num_resources; k++) {
 			res = tiop->resource + k;
 			if (res->start == offset) {
-				spin_unlock_irq(&trapped_lock);
+				spin_unlock_irqrestore(&trapped_lock, flags);
 				return tiop->virt_base + voffs;
 			}
 
@@ -127,7 +128,7 @@ void __iomem *match_trapped_io_handler(struct list_head *list,
 			voffs += roundup(len, PAGE_SIZE);
 		}
 	}
-	spin_unlock_irq(&trapped_lock);
+	spin_unlock_irqrestore(&trapped_lock, flags);
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(match_trapped_io_handler);
-- 
cgit v1.2.3


From 3c928320b2254cb6c8d8a7919a1fcf94ca7cae66 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 29 Jul 2009 15:04:05 +0000
Subject: sh: romImage support V2

This patch contains support for the romImage build target V2.

The resulting romImage file should be burned to rom
or flash and could be used as small boot loader.

Board code should keep their setup code in the file
romimage.h located in their mach include directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile                       |  2 +-
 arch/sh/boot/Makefile                  | 11 +++++++++--
 arch/sh/boot/romimage/Makefile         | 19 +++++++++++++++++++
 arch/sh/boot/romimage/head.S           | 10 ++++++++++
 arch/sh/boot/romimage/vmlinux.scr      |  6 ++++++
 arch/sh/include/mach-common/romimage.h |  1 +
 6 files changed, 46 insertions(+), 3 deletions(-)
 create mode 100644 arch/sh/boot/romimage/Makefile
 create mode 100644 arch/sh/boot/romimage/head.S
 create mode 100644 arch/sh/boot/romimage/vmlinux.scr
 create mode 100644 arch/sh/include/mach-common/romimage.h

(limited to 'arch')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index c46b3d508f2..2a7e73faee8 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -195,7 +195,7 @@ libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
 BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
-	       zImage vmlinux.srec
+	       zImage vmlinux.srec romImage
 PHONY += maketools $(BOOT_TARGETS) FORCE
 
 maketools:  include/linux/version.h FORCE
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index dd2a852041e..a1316872be6 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -24,9 +24,9 @@ suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
 
-targets := zImage vmlinux.srec uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
-subdir- := compressed
+subdir- := compressed romimage
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -35,6 +35,13 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
+$(obj)/romImage: $(obj)/romimage/vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo '  Kernel: $@ is ready'
+
+$(obj)/romimage/vmlinux: $(obj)/zImage FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/romimage $@
+
 KERNEL_MEMORY := 0x00000000
 ifeq ($(CONFIG_PMB_FIXED),y)
 KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
new file mode 100644
index 00000000000..5806eee84f6
--- /dev/null
+++ b/arch/sh/boot/romimage/Makefile
@@ -0,0 +1,19 @@
+#
+# linux/arch/sh/boot/romimage/Makefile
+#
+# create an image suitable for burning to flash from zImage
+#
+
+targets		:= vmlinux head.o
+
+OBJECTS = $(obj)/head.o
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
+	$(call if_changed,ld)
+	@:
+
+LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr arch/sh/boot/zImage FORCE
+	$(call if_changed,ld)
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
new file mode 100644
index 00000000000..97a087bc9c4
--- /dev/null
+++ b/arch/sh/boot/romimage/head.S
@@ -0,0 +1,10 @@
+/*
+ *  linux/arch/sh/boot/romimage/head.S
+ *
+ * Board specific setup code, executed before zImage loader
+ */
+
+.text
+	.global	romstart
+romstart:
+#include <romimage.h>
diff --git a/arch/sh/boot/romimage/vmlinux.scr b/arch/sh/boot/romimage/vmlinux.scr
new file mode 100644
index 00000000000..287c08f8b4b
--- /dev/null
+++ b/arch/sh/boot/romimage/vmlinux.scr
@@ -0,0 +1,6 @@
+SECTIONS
+{
+  .text : {
+	*(.data)
+	}
+}
diff --git a/arch/sh/include/mach-common/romimage.h b/arch/sh/include/mach-common/romimage.h
new file mode 100644
index 00000000000..267e24112d8
--- /dev/null
+++ b/arch/sh/include/mach-common/romimage.h
@@ -0,0 +1 @@
+/* do nothing here by default */
-- 
cgit v1.2.3


From d162300e6c963fe255ea7f73b956a7716e24205d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 29 Jul 2009 15:06:15 +0000
Subject: sh: kfr2r09 romImage support V2

This patch is romImage support for the kfr2r09 board V2.

The partner-jet-setup.txt file is converted into assembly code
which becomes the first code to execute from the reset vector.

The file partner-jet-setup.txt can also be used to setup
the hardware using a JTAG debugger so booting from RAM can
be done without burning the code to flash.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-kfr2r09/partner-jet-setup.txt | 134 +++++++++++++++++++++
 arch/sh/include/mach-kfr2r09/romimage.h            |  75 ++++++++++++
 2 files changed, 209 insertions(+)
 create mode 100644 arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
 create mode 100644 arch/sh/include/mach-kfr2r09/romimage.h

(limited to 'arch')

diff --git a/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
new file mode 100644
index 00000000000..9c85088728a
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
@@ -0,0 +1,134 @@
+LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
+LIST "set up enough of the kfr2r09 hardware to boot the kernel"
+
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "select mode for cs5 + cs6"
+ED 0xff800020, 0xa5a50001
+ED 0xfec10000, 0x0000001b
+
+LIST "setup clocks"
+ED 0xa4150004, 0x00000050
+ED 0xa4150000, 0x91053508
+WAIT 1
+ED 0xa4150024, 0x00005000
+
+LIST "setup pins"
+EB 0xa4050120, 0x00
+EB 0xa4050122, 0x00
+EB 0xa4050124, 0x00
+EB 0xa4050126, 0x00
+EB 0xa4050128, 0xA0
+EB 0xa405012A, 0x10
+EB 0xa405012C, 0x00
+EB 0xa405012E, 0x00
+EB 0xa4050130, 0x00
+EB 0xa4050132, 0x00
+EB 0xa4050134, 0x01
+EB 0xa4050136, 0x40
+EB 0xa4050138, 0x00
+EB 0xa405013A, 0x00
+EB 0xa405013C, 0x00
+EB 0xa405013E, 0x20
+EB 0xa4050160, 0x00
+EB 0xa4050162, 0x40
+EB 0xa4050164, 0x03
+EB 0xa4050166, 0x00
+EB 0xa4050168, 0x00
+EB 0xa405016A, 0x00
+EB 0xa405016C, 0x00
+
+EW 0xa405014E, 0x5660
+EW 0xa4050150, 0x0145
+EW 0xa4050152, 0x1550
+EW 0xa4050154, 0x0200
+EW 0xa4050156, 0x0040
+
+EW 0xa4050158, 0x0000
+EW 0xa405015a, 0x0000
+EW 0xa405015c, 0x0000
+EW 0xa405015e, 0x0000
+
+EW 0xa4050180, 0x0000
+EW 0xa4050182, 0x8002
+EW 0xa4050184, 0x0000
+
+EW 0xa405018a, 0x9991
+EW 0xa405018c, 0x8011
+EW 0xa405018e, 0x9550
+
+EW 0xa4050100, 0x0000
+EW 0xa4050102, 0x5540
+EW 0xa4050104, 0x0000
+EW 0xa4050106, 0x0000
+EW 0xa4050108, 0x4550
+EW 0xa405010a, 0x0130
+EW 0xa405010c, 0x0555
+EW 0xa405010e, 0x0000
+EW 0xa4050110, 0x0000
+EW 0xa4050112, 0xAAA8
+EW 0xa4050114, 0x8305
+EW 0xa4050116, 0x10F0
+EW 0xa4050118, 0x0F50
+EW 0xa405011a, 0x0000
+EW 0xa405011c, 0x0000
+EW 0xa405011e, 0x0555
+EW 0xa4050140, 0x0000
+EW 0xa4050142, 0x5141
+EW 0xa4050144, 0x5005
+EW 0xa4050146, 0xAAA9
+EW 0xa4050148, 0xFAA9
+EW 0xa405014a, 0x3000
+EW 0xa405014c, 0x0000
+
+LIST "setup sdram"
+ED 0xFD000108, 0x40000301
+ED 0xFD000020, 0x011B0002
+ED 0xFD000030, 0x03060E02
+ED 0xFD000034, 0x01020102
+ED 0xFD000038, 0x01090406
+ED 0xFD000008, 0x00000004
+ED 0xFD000040, 0x00000001
+ED 0xFD000040, 0x00000000
+ED 0xFD000018, 0x00000001
+
+WAIT 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000060, 0x00000032
+ED 0xFD000060, 0x00020000
+ED 0xFD000014, 0x00000004
+ED 0xFD000014, 0x00000004
+ED 0xFD000010, 0x00000001
+ED 0xFD000044, 0x000004AF
+ED 0xFD000048, 0x20CF0037
+
+LIST "read 16 bytes from sdram"
+DD 0xa8000000, 0xa8000000, 1
+DD 0xa8000004, 0xa8000004, 1
+DD 0xa8000008, 0xa8000008, 1
+DD 0xa800000c, 0xa800000c, 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000014, 0x00000004
+ED 0xFD000108, 0x40000300
+ED 0xFD000040, 0x00010000
+
+LIST "write to internal ram"
+ED 0xfd8007fc, 0
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/romimage.h b/arch/sh/include/mach-kfr2r09/romimage.h
new file mode 100644
index 00000000000..f5aa8e16770
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/romimage.h
@@ -0,0 +1,75 @@
+/* kfr2r09 board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+/* The LIST command is used to include comments in the script */
+.macro	LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro  ED, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.l r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro  EW, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.w r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro  EB, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.b r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro  WAIT, time
+        mov.l  2f ,r3
+1:
+        nop
+        tst     r3, r3
+        bf/s    1b
+         dt      r3
+	bra	3f
+	 nop
+	.align 2
+2:	.long \time * 100
+3:
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro  DD, addr, addr2, nr
+        mov.l 1f ,r1
+        mov.l @r1, r0
+	bra 2f
+	 nop
+	.align 2
+1:	.long \addr
+2:
+.endm
+
+#include "partner-jet-setup.txt"
-- 
cgit v1.2.3


From fdeb076f20df14b1c7f2817362172548d146b121 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 30 Jul 2009 00:27:35 +0900
Subject: sh: Add romImage target to archhelp.

Adds an archhelp blurb for the romImage target so it is reflected in
'make help'.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 2a7e73faee8..b6ff337fd85 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -216,6 +216,7 @@ archclean:
 
 define archhelp
 	@echo '  zImage 	           - Compressed kernel image'
+	@echo '  romImage	           - Compressed ROM image, if supported'
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
 	@echo '* uImage  	           - Alias to bootable U-Boot image'
 	@echo '  uImage.srec	           - Create an S-record for U-Boot'
-- 
cgit v1.2.3


From 94699b04eddd4b247d871930431d6fa1a46c175e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 28 Jul 2009 23:52:54 +0200
Subject: x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs

On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold
boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog):

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 BANK 1 MCG status:
MCi status:
Error overflow
Uncorrected error
Error enabled
Processor context corrupt
MCA: Data CACHE Level-1 UNKNOWN Error
STATUS f200000000000195 MCGSTATUS 0

[ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error)
  and f200000000000115 (... READ Error).

  To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified
  the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump
  content of STATUS MSR before it is cleared during initialization. ]

Since the bogus MCE results in a kernel taint (which in turn disables
lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs
by default ("mce=bootlog" boot parameter can be be used to get the old
behavior).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 07139a0578e..7bd19c7f531 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1269,6 +1269,10 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 		if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
 			monarch_timeout < 0)
 			monarch_timeout = USEC_PER_SEC;
+
+		/* There are also broken BIOSes on some Pentium M systems. */
+		if (c->x86 == 6 && c->x86_model == 13 && mce_bootlog < 0)
+			mce_bootlog = 0;
 	}
 	if (monarch_timeout < 0)
 		monarch_timeout = 0;
-- 
cgit v1.2.3


From e3346fc48204d780f92527d06df8bf6f28d603ec Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 28 Jul 2009 23:55:09 +0200
Subject: x86, mce: fix "mce" boot option handling for CONFIG_X86_NEW_MCE

"mce argument mce ignored. Please use /sys" message shouldn't
be printed when using "mce" boot option.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 7bd19c7f531..75919440a18 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1549,8 +1549,10 @@ static struct miscdevice mce_log_device = {
  */
 static int __init mcheck_enable(char *str)
 {
-	if (*str == 0)
+	if (*str == 0) {
 		enable_p5_mce();
+		return 1;
+	}
 	if (*str == '=')
 		str++;
 	if (!strcmp(str, "off"))
-- 
cgit v1.2.3


From 419d6162c0c0103fa2f44f6691dff9cac14c650d Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 28 Jul 2009 23:56:00 +0200
Subject: x86, mce: add missing __cpuinit tags

mce_cap_init() and mce_cpu_quirks() can be tagged with __cpuinit.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 75919440a18..1ce6db1f878 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1158,7 +1158,7 @@ static int mce_banks_init(void)
 /*
  * Initialize Machine Checks for a CPU.
  */
-static int mce_cap_init(void)
+static int __cpuinit mce_cap_init(void)
 {
 	unsigned b;
 	u64 cap;
@@ -1222,7 +1222,7 @@ static void mce_init(void)
 }
 
 /* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+static void __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
 {
 	/* This should be disabled by the BIOS, but isn't always */
 	if (c->x86_vendor == X86_VENDOR_AMD) {
-- 
cgit v1.2.3


From d0c87d1f61704ed589fc0788bedd753632340e98 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 28 Jul 2009 23:56:37 +0200
Subject: x86, mce: remove never executed code

fseverities_coverage is never NULL in err_out code path.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce-severity.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index ff0807f9705..51f7c725dab 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -209,8 +209,6 @@ static int __init severities_debugfs_init(void)
 	return 0;
 
 err_out:
-	if (fseverities_coverage)
-		debugfs_remove(fseverities_coverage);
 	if (dmce)
 		debugfs_remove(dmce);
 	return -ENOMEM;
-- 
cgit v1.2.3


From f3a0867b12e0cf1512c0bd0665f2339fc75ed2a8 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 29 Jul 2009 00:04:59 +0200
Subject: x86, mce: fix reporting of Thermal Monitoring mechanism enabled

Early Pentium M models use different method for enabling TM2
(per paragraph 13.5.2.3 of the "Intel 64 and IA-32 Architectures
Software Developer's Manual Volume 3A: System Programming Guide,
Part 1").

Tested on the affected Pentium M variant (model == 13).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/msr-index.h         |  4 ++++
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 13 ++++++++++---
 2 files changed, 14 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 3d1ce094586..cbec06deb68 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -222,6 +222,10 @@
 
 #define THERM_STATUS_PROCHOT		(1 << 0)
 
+#define MSR_THERM2_CTL			0x0000019d
+
+#define MSR_THERM2_CTL_TM_SELECT	(1ULL << 16)
+
 #define MSR_IA32_MISC_ENABLE		0x000001a0
 
 /* MISC_ENABLE bits: architectural */
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index bff8dd191dd..15f2bc07bb6 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -253,9 +253,6 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 		return;
 	}
 
-	if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
-		tm2 = 1;
-
 	/* Check whether a vector already exists */
 	if (h & APIC_VECTOR_MASK) {
 		printk(KERN_DEBUG
@@ -264,6 +261,16 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 		return;
 	}
 
+	/* early Pentium M models use different method for enabling TM2 */
+	if (cpu_has(c, X86_FEATURE_TM2)) {
+		if (c->x86 == 6 && (c->x86_model == 9 || c->x86_model == 13)) {
+			rdmsr(MSR_THERM2_CTL, l, h);
+			if (l & MSR_THERM2_CTL_TM_SELECT)
+				tm2 = 1;
+		} else if (l & MSR_IA32_MISC_ENABLE_TM2)
+			tm2 = 1;
+	}
+
 	/* We'll mask the thermal vector in the lapic till we're ready: */
 	h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
 	apic_write(APIC_LVTTHMR, h);
-- 
cgit v1.2.3


From 0c997c0eaac8c68fa23719617484dae29bddaedd Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Wed, 22 Jul 2009 00:33:06 +0200
Subject: S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip

In the s3c_gpiolib_getchip implementation for s3c24xx the check whether a pin is
in the gpio banks range is reversed. Thus the function returns NULL for valid
pins and the gpio chip if its not valid.

As a result gpio states are not saved/restored properly during suspend/resume.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/gpio-core.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 8fe192081d3..f8b879a7973 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
-	return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+	return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
 }
 
 #endif /* __ASM_ARCH_GPIO_CORE_H */
-- 
cgit v1.2.3


From 1d91e1a296244690461a7c36d71710dfbabbc219 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 15 Jul 2009 13:03:34 +0100
Subject: S3C64XX: Fix get_rate() for ARMCLK

If the requested clock is faster than the parent clock then the
parent clock is the closest we can get to the request so we need
to return that instead of the requested clock.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 1debc1f9f98..f8165e62247 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
 	u32 div;
 
 	if (parent < rate)
-		return rate;
+		return parent;
 
 	div = (parent / rate) - 1;
 	if (div > armclk_mask)
-- 
cgit v1.2.3


From 9b71de49b030ad8fd4d13d38571b5c42dc9ed8dd Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 15 Jul 2009 13:03:35 +0100
Subject: S3C64XX: Fix ARMCLK configuration

The value of armclk_mask needs to be inverted for use as a mask on
the register value when updating ARM_RATIO.

This is critical for cpufreq support, without it attempts to scale
the frequency of the core trash pretty much the entire clock tree.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index f8165e62247..febac1950d8 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
 	div = clk_get_rate(clk->parent) / rate;
 
 	val = __raw_readl(S3C_CLK_DIV0);
-	val &= armclk_mask;
+	val &= ~armclk_mask;
 	val |= (div - 1);
 	__raw_writel(val, S3C_CLK_DIV0);
 
-- 
cgit v1.2.3


From 5156ddce6c0a152ee7ccab2c976c6a8abc8a49b5 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 29 Jul 2009 23:04:25 -0500
Subject: powerpc/mm: Fix SMP issue with MMU context handling code

In switch_mmu_context() if we call steal_context_smp() to get a context
to use we shouldn't fall through and than call steal_context_up().  Doing
so can be problematic in that the 'mm' that steal_context_up() ends up
using will not get marked dirty in the stale_map[] for other CPUs that
might have used that mm.  Thus we could end up with stale TLB entries in
the other CPUs that can cause all kinda of havoc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/mm/mmu_context_nohash.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 92a197117d5..b1a727def15 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -217,6 +217,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 			id = steal_context_smp(id);
 			if (id == MMU_NO_CONTEXT)
 				goto again;
+			goto stolen;
 		}
 #endif /* CONFIG_SMP */
 		id = steal_context_up(id);
-- 
cgit v1.2.3


From c4673f9a32d7b02bcd2057763d3d368efe5809c3 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 24 Jun 2009 20:30:28 +0400
Subject: powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards

Linux isn't able to detect link changes on ethernet ports that were
used by U-Boot. This is because U-Boot wrongly clears interrupt
polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR,
0x1b) of Marvell PHYs.

There is no easy way for PHY drivers to know IRQ line polarity (we
could extract it from the device tree and pass it to phydevs, but
that'll be quite a lot of work), so for now just reset the PHYs to
their default states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/mpc85xx_mds.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 60ed9c067b1..bfb32834ab0 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -233,6 +233,19 @@ static void __init mpc85xx_mds_setup_arch(void)
 			/* Turn UCC1 & UCC2 on */
 			setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
 			setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+		} else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST	(0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
+			/*
+			 * U-Boot mangles interrupt polarity for Marvell PHYs,
+			 * so reset built-in and UEM Marvell PHYs, this puts
+			 * the PHYs into their normal state.
+			 */
+			clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+			setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+			setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+			clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
 		}
 		iounmap(bcsr_regs);
 	}
-- 
cgit v1.2.3


From 8a0b177f367a8fd03dc5ba1f5a4494d1424471aa Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <cbouatmailru@gmail.com>
Date: Wed, 1 Jul 2009 21:39:25 +0400
Subject: powerpc/85xx: Don't scan for TBI PHY addresses on MPC8569E-MDS boards

Sometimes (e.g. when there are no UEMs attached to a board)
fsl_pq_mdio_find_free() fails to find a spare address for a TBI PHY,
this is because get_phy_id() returns bogus 0x0000ffff values
(0xffffffff is expected), and therefore mdio bus probing fails with
the following message:

  fsl-pq_mdio: probe of e0082120.mdio failed with error -16

And obviously ethernet doesn't work after this.

This patch solves the problem by adding tbi-phy node into mdio node,
so that we won't scan for spare addresses, we'll just use a fixed one.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a680165292f..9e4ce99e161 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -501,6 +501,10 @@
 				reg = <0x6>;
 				device_type = "ethernet-phy";
 			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 		mdio@3520 {
 			#address-cells = <1>;
-- 
cgit v1.2.3


From 1333c3d6d35bdb109ddbd4b7086cbf066a27b156 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Tue, 21 Jul 2009 01:36:43 +0400
Subject: powerpc/83xx: Fix PCI IO base address on MPC837xE-RDB boards

U-Boot maps PCI IO at 0xe0300000, while current dts files specify
0xe2000000. This leads to the following oops with CONFIG_8139TOO_PIO=y.

8139too Fast Ethernet driver 0.9.28
Machine check in kernel mode.
Caused by (from SRR1=41000): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
MPC837x RDB
[...]
NIP [00000900] 0x900
LR [c0439df8] rtl8139_init_board+0x238/0x524
Call Trace:
[cf831d90] [c0439dcc] rtl8139_init_board+0x20c/0x524 (unreliable)
[cf831de0] [c043a15c] rtl8139_init_one+0x78/0x65c
[cf831e40] [c0235250] pci_call_probe+0x20/0x30
[...]

This patch fixes the issue by specifying the correct PCI IO base
address.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8377_rdb.dts | 2 +-
 arch/powerpc/boot/dts/mpc8378_rdb.dts | 2 +-
 arch/powerpc/boot/dts/mpc8379_rdb.dts | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 224b4f0704b..4f06dbc0d27 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -410,7 +410,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 474ea2fa3f8..aabf3437cad 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -394,7 +394,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index d4838af8d37..9b1da864d89 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -424,7 +424,7 @@
 		bus-range = <0x0 0x0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
-- 
cgit v1.2.3


From f27d4d47dcf8906c8a22908dc1d32ec641e9fbe0 Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Thu, 2 Jul 2009 15:18:35 +0100
Subject: powerpc/86xx: Update defconfig for GE Fanuc's PPC9A

General update of defconfig including the following notable changes:
 - Enable GPIO access via sysfs on GE Fanuc's PPC9A.
 - Enable Highmem support.
 - Support for PCMCIA based daughter card.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 518 ++++++++++----------------
 1 file changed, 196 insertions(+), 322 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index b6a23af57f4..d8354d993b2 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:31 2009
+# Linux kernel version: 2.6.30
+# Thu Jul  2 13:55:24 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,6 +34,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,9 +116,7 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +129,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +152,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +169,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -216,7 +229,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -235,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,14 +299,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
-CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -353,8 +385,8 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -380,174 +412,26 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
-CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
+# CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
 #
@@ -560,12 +444,7 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -580,9 +459,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -672,6 +551,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -707,9 +587,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -731,10 +662,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -751,6 +678,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -759,6 +687,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -778,7 +707,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -791,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -842,6 +771,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -862,14 +792,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -916,6 +849,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -935,8 +869,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -963,22 +899,8 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -990,7 +912,6 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
 # CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -1010,7 +931,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -1058,6 +979,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1080,6 +1002,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -1143,18 +1073,21 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -1229,6 +1162,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1284,24 +1218,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1346,7 +1265,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1363,10 +1282,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1392,6 +1312,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1475,7 +1396,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1521,6 +1441,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1548,6 +1469,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1569,10 +1494,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1589,8 +1516,11 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
@@ -1598,8 +1528,8 @@ CONFIG_INOTIFY_USER=y
 CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1649,6 +1579,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1723,13 +1654,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
@@ -1738,6 +1669,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1750,75 +1682,24 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1826,15 +1707,9 @@ CONFIG_PRINT_STACK_DEPTH=64
 # Security options
 #
 # CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1854,11 +1729,11 @@ CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_NULL is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
@@ -1873,53 +1748,52 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
 # CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
 # Compression
-- 
cgit v1.2.3


From 083e268c8b78606658f2e4524168ff45825d879e Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Thu, 2 Jul 2009 15:18:44 +0100
Subject: powerpc/86xx: Update GE Fanuc sbc310 default configuration

General update of defconfig including the following notable changes:
 - Enable Highmem support.
 - Support for PCMCIA based daughter card.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/86xx/gef_sbc310_defconfig | 213 ++++++++++++++++++-------
 1 file changed, 154 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a66910e6334..f2362e5bf06 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:29 2009
+# Linux kernel version: 2.6.30
+# Thu Jul  2 14:10:12 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,6 +34,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -91,7 +95,11 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,7 +117,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,8 +129,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +152,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -151,7 +169,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,7 +186,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
 
 #
 # Platform support
@@ -212,7 +229,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -231,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,13 +299,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
+# CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -393,6 +430,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +459,9 @@ CONFIG_FIB_RULES=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -511,6 +551,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -546,9 +587,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -570,10 +662,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -590,6 +678,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -598,6 +687,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -617,7 +707,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -630,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -647,14 +737,17 @@ CONFIG_SATA_SIL24=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -701,6 +794,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -720,8 +814,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -748,6 +844,7 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -827,6 +924,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -849,6 +947,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -912,13 +1018,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -997,6 +1107,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1052,24 +1163,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1114,7 +1210,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1131,10 +1227,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,6 +1257,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1288,6 +1386,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1315,6 +1414,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1336,10 +1439,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1419,6 +1524,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1508,6 +1614,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1531,23 +1638,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
-- 
cgit v1.2.3


From 34466c5be4dd1490acf98e6d2ff8f3728d8ca5c1 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Wed, 29 Jul 2009 23:34:01 -0500
Subject: powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/83xx/asp8347_defconfig       | 106 +++++++-----
 arch/powerpc/configs/83xx/kmeter1_defconfig       | 176 +++++++++++++-------
 arch/powerpc/configs/83xx/mpc8313_rdb_defconfig   | 168 +++++++++++++------
 arch/powerpc/configs/83xx/mpc8315_rdb_defconfig   | 168 +++++++++++++------
 arch/powerpc/configs/83xx/mpc832x_mds_defconfig   | 111 +++++++------
 arch/powerpc/configs/83xx/mpc832x_rdb_defconfig   | 120 ++++++++------
 arch/powerpc/configs/83xx/mpc834x_itx_defconfig   | 114 +++++++------
 arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 114 +++++++------
 arch/powerpc/configs/83xx/mpc834x_mds_defconfig   | 104 +++++++-----
 arch/powerpc/configs/83xx/mpc836x_mds_defconfig   | 111 +++++++------
 arch/powerpc/configs/83xx/mpc836x_rdk_defconfig   | 104 +++++++-----
 arch/powerpc/configs/83xx/mpc837x_mds_defconfig   | 110 ++++++------
 arch/powerpc/configs/83xx/mpc837x_rdb_defconfig   | 162 ++++++++++++------
 arch/powerpc/configs/83xx/sbc834x_defconfig       | 103 +++++++-----
 arch/powerpc/configs/85xx/ksi8560_defconfig       |  93 +++++++----
 arch/powerpc/configs/85xx/mpc8540_ads_defconfig   |  91 ++++++----
 arch/powerpc/configs/85xx/mpc8560_ads_defconfig   |  99 +++++++----
 arch/powerpc/configs/85xx/mpc85xx_cds_defconfig   |  99 +++++++----
 arch/powerpc/configs/85xx/sbc8548_defconfig       |  96 ++++++-----
 arch/powerpc/configs/85xx/sbc8560_defconfig       |  91 ++++++----
 arch/powerpc/configs/85xx/socrates_defconfig      | 165 ++++++++++++------
 arch/powerpc/configs/85xx/stx_gp3_defconfig       | 119 ++++++++-----
 arch/powerpc/configs/85xx/tqm8540_defconfig       | 100 ++++++-----
 arch/powerpc/configs/85xx/tqm8541_defconfig       | 101 ++++++-----
 arch/powerpc/configs/85xx/tqm8548_defconfig       | 100 +++++++----
 arch/powerpc/configs/85xx/tqm8555_defconfig       | 101 ++++++-----
 arch/powerpc/configs/85xx/tqm8560_defconfig       | 101 ++++++-----
 arch/powerpc/configs/85xx/xes_mpc85xx_defconfig   | 118 +++++++------
 arch/powerpc/configs/86xx/gef_ppc9a_defconfig     |   7 +-
 arch/powerpc/configs/86xx/gef_sbc310_defconfig    |   7 +-
 arch/powerpc/configs/86xx/gef_sbc610_defconfig    | 130 +++++++++------
 arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig  | 118 ++++++++-----
 arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig  | 186 ++++++++++-----------
 arch/powerpc/configs/86xx/sbc8641d_defconfig      | 112 ++++++++-----
 arch/powerpc/configs/adder875_defconfig           |  97 +++++++----
 arch/powerpc/configs/c2k_defconfig                | 121 ++++++++------
 arch/powerpc/configs/ep8248e_defconfig            |  97 +++++++----
 arch/powerpc/configs/ep88xc_defconfig             |  91 ++++++----
 arch/powerpc/configs/linkstation_defconfig        | 116 ++++++++-----
 arch/powerpc/configs/mgcoge_defconfig             |  97 +++++++----
 arch/powerpc/configs/mgsuvd_defconfig             |  89 +++++-----
 arch/powerpc/configs/mpc7448_hpc2_defconfig       | 103 ++++++------
 arch/powerpc/configs/mpc8272_ads_defconfig        | 104 +++++++-----
 arch/powerpc/configs/mpc83xx_defconfig            | 162 ++++++++++++------
 arch/powerpc/configs/mpc85xx_defconfig            | 193 ++++++++++------------
 arch/powerpc/configs/mpc85xx_smp_defconfig        | 193 ++++++++++------------
 arch/powerpc/configs/mpc866_ads_defconfig         |  92 ++++++-----
 arch/powerpc/configs/mpc86xx_defconfig            | 186 ++++++++++-----------
 arch/powerpc/configs/mpc885_ads_defconfig         |  91 ++++++----
 arch/powerpc/configs/pq2fads_defconfig            | 110 +++++++-----
 arch/powerpc/configs/prpmc2800_defconfig          | 158 ++++++++++++------
 arch/powerpc/configs/storcenter_defconfig         | 108 ++++++------
 52 files changed, 3639 insertions(+), 2374 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 27893971377..a2df0635b6d 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:05 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:02 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -490,6 +512,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -525,7 +548,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -545,14 +570,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -599,6 +627,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -618,8 +647,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -786,13 +817,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -847,6 +882,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -900,24 +936,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -960,6 +981,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1069,6 +1091,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1096,6 +1119,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1115,10 +1142,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1192,6 +1221,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1287,6 +1317,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1312,22 +1343,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index bf0853f29f3..93ebd443a18 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,25 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Apr  3 10:34:33 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:03 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,21 +33,22 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -52,11 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,19 +78,30 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -93,17 +111,23 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -116,10 +140,15 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -127,11 +156,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,14 +173,11 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -179,6 +202,8 @@ CONFIG_PPC_83xx=y
 CONFIG_KMETER1=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -194,6 +219,8 @@ CONFIG_IPIC=y
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -212,16 +239,17 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -233,12 +261,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -331,7 +364,10 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +378,8 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -362,6 +398,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -430,6 +467,11 @@ CONFIG_MTD_PHRAM=y
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -445,7 +487,6 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG is not set
 # CONFIG_MTD_UBI_DEBUG_PARANOID is not set
 # CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
-# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
@@ -459,6 +500,7 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,10 +547,15 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -517,11 +564,12 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_NETDEV_10000 is not set
@@ -531,7 +579,10 @@ CONFIG_UCC_GETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_WAN=y
 CONFIG_HDLC=y
 # CONFIG_HDLC_RAW is not set
@@ -543,8 +594,6 @@ CONFIG_HDLC=y
 #
 # X.25/LAPB support is disabled
 #
-CONFIG_HDLC_KM=y
-CONFIG_FS_UCC_HDLC=y
 # CONFIG_DLCI is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
@@ -600,16 +649,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_BOOTCOUNT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
@@ -642,20 +693,20 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -677,27 +728,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -720,11 +759,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -736,9 +780,12 @@ CONFIG_UIO=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -747,6 +794,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -772,10 +824,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -796,6 +845,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -804,6 +854,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -815,7 +866,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -845,11 +895,13 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -859,11 +911,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -883,13 +936,18 @@ CONFIG_DEBUG_FS=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index c5c0fe71a43..ff33a7db2ea 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:04 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -643,14 +665,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -714,6 +739,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -735,8 +762,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -924,7 +953,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -938,13 +966,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1002,6 +1035,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1056,24 +1090,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1135,6 +1155,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1144,9 +1165,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1235,8 +1256,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1244,9 +1266,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1298,6 +1322,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1332,6 +1357,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1351,10 +1380,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1428,6 +1459,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1464,7 +1496,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1488,6 +1559,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1518,6 +1590,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1529,7 +1604,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1543,16 +1617,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1560,6 +1633,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index af4952feba3..76237d46670 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:05 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -704,14 +726,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -775,6 +800,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -796,8 +823,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -985,7 +1014,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -999,13 +1027,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1063,6 +1096,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1117,24 +1151,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1196,6 +1216,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1205,9 +1226,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1296,8 +1317,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1305,9 +1327,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1359,6 +1383,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1393,6 +1418,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1412,10 +1441,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1489,6 +1520,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1525,7 +1557,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1549,6 +1620,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1579,6 +1651,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1590,7 +1665,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1604,16 +1678,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1621,6 +1694,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 8c8f660b4fc..e0e36a11340 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:07 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:06 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -404,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -438,7 +461,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -461,10 +486,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -482,6 +503,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -490,6 +512,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -509,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -532,14 +554,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -586,6 +611,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -605,11 +631,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -787,13 +815,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -848,6 +880,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +929,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -996,6 +1015,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1023,6 +1043,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1042,10 +1066,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1108,6 +1134,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1165,6 +1192,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1190,22 +1218,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 227dbba7679..4f27d454822 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:08 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -405,6 +427,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -441,7 +464,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -464,10 +489,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -485,6 +506,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -493,6 +515,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -512,7 +535,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -535,14 +557,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -590,6 +615,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -609,11 +636,13 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -804,7 +833,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -817,13 +845,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -881,6 +914,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -935,24 +969,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1014,6 +1034,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1023,9 +1044,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1127,6 +1148,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1136,6 +1159,10 @@ CONFIG_MMC_SPI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1155,10 +1182,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1224,6 +1253,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1325,6 +1355,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1350,22 +1381,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 24ee7fcac87..648dac0c9d8 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:09 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -594,10 +619,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -615,6 +636,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -623,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -642,7 +665,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -737,14 +759,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -791,8 +816,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -960,7 +987,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -973,13 +999,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1026,24 +1057,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1085,6 +1102,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1208,6 +1226,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1242,6 +1261,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1261,10 +1284,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1331,6 +1356,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1429,6 +1455,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1454,22 +1481,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 7f39543205a..bf6deb831dc 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:10 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:08 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,10 +571,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -567,6 +588,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -575,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -594,7 +617,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -617,14 +639,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -671,8 +696,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -840,7 +867,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -853,13 +879,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -906,24 +937,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -965,6 +982,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1087,6 +1105,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1121,6 +1140,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1140,10 +1163,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1210,6 +1235,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1308,6 +1334,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1333,22 +1360,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 1cd1fcac22c..3236c47712c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:11 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:09 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,14 +482,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -527,6 +555,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -548,8 +577,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -724,13 +755,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -785,6 +820,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -833,23 +869,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -933,6 +955,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -960,6 +983,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -979,10 +1006,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1045,6 +1074,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1100,6 +1130,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1125,22 +1156,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index ce5177393a0..8c5299d7481 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:10 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC836x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -364,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -381,7 +399,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -485,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -519,7 +542,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -542,10 +567,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -563,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -571,6 +593,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -590,7 +613,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -613,14 +635,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -667,6 +692,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -686,11 +712,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -868,13 +896,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -929,6 +961,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -977,23 +1010,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1077,6 +1096,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1104,6 +1124,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1123,10 +1147,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1190,6 +1216,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1247,6 +1274,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1272,22 +1300,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 7f1d1383a24..ff31667a890 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:13 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:12 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,12 +57,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -498,6 +520,7 @@ CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -533,7 +556,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,14 +578,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,11 +635,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -777,7 +807,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -791,13 +820,18 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -865,23 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -990,6 +1011,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1009,10 +1034,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1086,6 +1113,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1145,6 +1173,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1170,22 +1199,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index bf636fd560a..e285ec0fe95 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:11 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,10 +485,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -481,6 +502,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -489,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -508,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -592,14 +614,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -646,6 +671,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -665,8 +691,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -844,13 +872,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -905,6 +937,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -953,23 +986,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1026,6 +1045,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1045,10 +1068,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1111,6 +1136,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1170,6 +1196,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1193,22 +1220,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index fe6454eacbd..1ab3e4cd301 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:14 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +395,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -398,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -433,7 +456,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -456,10 +481,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -476,6 +497,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -484,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -503,7 +526,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -598,14 +620,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,6 +677,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -671,8 +697,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -842,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -903,6 +935,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -956,24 +989,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1011,7 +1029,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1028,10 +1046,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1057,6 +1076,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1141,6 +1161,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1160,10 +1184,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1226,6 +1252,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1262,7 +1289,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1285,6 +1351,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1308,22 +1375,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index fe08f672cb2..a592b5efdc4 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:15 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,8 +124,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -188,6 +203,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -232,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +269,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -363,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -380,7 +398,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -401,6 +423,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -435,7 +458,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -455,14 +480,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,6 +537,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -528,8 +557,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -688,13 +719,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -749,6 +784,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -797,23 +833,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -851,6 +873,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -862,10 +888,12 @@ CONFIG_HID=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -928,6 +956,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -971,6 +1000,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -994,22 +1024,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 09146ddaa3c..ff04e1028f5 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:14 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +111,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -143,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +380,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +487,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,7 +542,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -560,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
@@ -567,6 +589,7 @@ CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -654,6 +677,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -710,22 +738,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -777,6 +790,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -797,10 +814,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +935,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +966,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -958,7 +981,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -972,16 +994,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -990,9 +1011,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 7b43be7586b..fb10cc83702 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:15 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,8 +126,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -145,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -178,6 +191,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -226,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -244,9 +259,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -387,6 +407,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -423,7 +444,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -462,9 +482,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -555,6 +577,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -590,22 +617,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -657,6 +669,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -676,10 +692,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -794,6 +812,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -824,6 +843,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -835,7 +857,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -849,16 +870,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -866,6 +886,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 62adb71a5d4..5c8ce697882 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:16 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -141,6 +150,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +161,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -181,6 +194,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +393,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -400,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -431,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -450,14 +472,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -527,8 +553,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -646,6 +674,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -707,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -779,6 +797,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -798,10 +820,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +940,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +971,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -957,7 +985,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -971,16 +998,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -988,6 +1014,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 41209e3a654..158e63e8607 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:17 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -227,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -245,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -358,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -375,7 +391,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -397,6 +417,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -428,6 +449,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -502,14 +524,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -556,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -575,8 +601,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -698,6 +726,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -737,22 +770,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -809,6 +827,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -828,10 +850,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -946,6 +970,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -976,6 +1001,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -987,7 +1015,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1001,16 +1028,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1018,6 +1044,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 6c36c9c7abf..2726fca1d69 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:19 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:18 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -354,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -371,7 +387,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -391,6 +411,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -422,6 +443,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -441,14 +463,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -495,6 +520,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -514,8 +540,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -637,6 +665,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -676,22 +709,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -721,6 +739,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -732,10 +754,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -838,6 +862,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -861,22 +886,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 4aaf1a6bdc7..b0c469823b0 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:20 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,7 +126,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +379,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +405,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -421,7 +442,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -460,9 +480,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -551,6 +573,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -586,22 +613,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -690,6 +702,10 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -701,10 +717,12 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -819,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +867,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +881,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +894,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -890,6 +910,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 79984589db6..04c85dada84 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:21 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +162,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -182,6 +195,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 CONFIG_SOCRATES=y
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -357,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,6 +389,7 @@ CONFIG_CAN_BCM=y
 # CAN Device Drivers
 #
 # CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_DEV is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -382,7 +399,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -499,6 +520,7 @@ CONFIG_MTD_NAND_SOCRATES=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -535,7 +557,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -558,10 +582,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -588,14 +608,17 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -643,6 +666,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -662,8 +687,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -733,6 +760,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -746,6 +774,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -862,7 +891,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -875,12 +903,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -938,6 +972,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -973,24 +1008,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1110,7 +1131,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1124,10 +1145,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1153,6 +1175,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1162,9 +1185,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1284,6 +1307,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1318,6 +1342,10 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1337,10 +1365,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1449,7 +1479,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1473,6 +1542,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1498,22 +1568,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index bd1bfcddbd0..e7e81d6769f 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:22 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:20 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +151,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -153,7 +166,7 @@ CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -186,6 +199,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -425,6 +440,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -442,7 +458,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +486,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
@@ -507,7 +528,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -581,10 +604,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
@@ -602,6 +621,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -610,6 +630,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -631,7 +652,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -654,14 +674,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +731,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_ATL2 is not set
 # CONFIG_FS_ENET is not set
@@ -729,8 +753,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -802,12 +828,13 @@ CONFIG_INPUT_EVDEV=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -821,6 +848,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -911,6 +939,7 @@ CONFIG_I2C_ALGOBIT=m
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -941,13 +970,17 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1027,6 +1060,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1060,23 +1094,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1143,6 +1163,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1162,10 +1186,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1316,6 +1342,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1346,6 +1373,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1358,7 +1388,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1372,16 +1401,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1389,6 +1417,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 767600145fb..2c407523aad 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:21 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
@@ -225,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -243,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -353,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -370,7 +386,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +491,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,7 +526,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -580,14 +603,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -650,6 +676,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -671,8 +698,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -850,13 +879,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -911,6 +944,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -945,23 +979,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1018,6 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1037,10 +1061,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1167,6 +1193,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1192,22 +1219,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 52fafc006dd..845731dc51c 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 8b4faae7a9a..4f228a90527 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:24 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:23 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -140,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -152,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -185,6 +198,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -368,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +515,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -531,7 +550,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -551,14 +572,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -605,6 +629,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -624,8 +649,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -801,13 +828,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -862,6 +893,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +928,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -977,6 +995,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1004,6 +1023,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1015,10 +1038,12 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1145,6 +1170,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1175,6 +1201,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1187,7 +1216,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1201,16 +1229,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1218,6 +1245,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 170360934ce..9196724bebc 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:25 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:24 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index f41cc2444d4..2e49a6e9faf 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:26 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 2552cbefba6..1025da2bf06 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Thu Jun 11 11:25:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -64,6 +65,7 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +128,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +152,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +169,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -239,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +300,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
@@ -404,6 +419,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -540,6 +556,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -575,7 +592,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -599,10 +618,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -619,6 +634,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -627,6 +643,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -646,7 +663,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -730,14 +746,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -784,6 +803,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -803,8 +823,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -986,13 +1008,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1072,6 +1098,7 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1126,23 +1153,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1187,7 +1200,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1201,10 +1214,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1230,6 +1244,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1325,7 +1340,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
 CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=y
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1352,8 +1367,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1398,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1439,10 @@ CONFIG_NET_DMA=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1444,11 +1462,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1629,6 +1648,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1659,6 +1679,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1671,7 +1694,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1685,16 +1707,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,6 +1723,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index d8354d993b2..527ad1a5e80 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jul  2 13:55:24 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:31 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
@@ -1322,6 +1323,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index f2362e5bf06..cd338d493be 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jul  2 14:10:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:29 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -39,6 +39,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
@@ -1267,6 +1268,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index c6a7fc82b69..ba47883f4aa 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:30 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:30 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +131,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -235,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -510,6 +528,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -566,7 +585,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -678,6 +701,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -713,7 +737,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -737,10 +763,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -757,6 +779,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -765,6 +788,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -784,7 +808,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -868,14 +891,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -922,6 +948,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -941,8 +968,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1149,13 +1178,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1235,6 +1268,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1290,24 +1324,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1352,7 +1371,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1369,10 +1388,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1398,6 +1418,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1407,6 +1428,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1527,6 +1550,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1554,6 +1578,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1575,10 +1603,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1645,6 +1675,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1734,6 +1765,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1759,10 +1791,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1774,7 +1810,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1788,17 +1823,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1806,6 +1840,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1829,7 +1866,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index cfd2efcc6bc..a61f183f718 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:27 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +56,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -230,6 +245,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -250,9 +266,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -279,6 +295,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -381,6 +399,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -398,7 +417,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -549,7 +572,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -620,10 +645,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -640,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -648,6 +670,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -667,7 +690,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -751,14 +773,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -792,6 +817,7 @@ CONFIG_ULI526X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -959,13 +985,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -993,23 +1023,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1106,6 +1122,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1130,6 +1151,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1160,6 +1182,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1251,6 +1274,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1278,6 +1302,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1297,12 +1325,15 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1464,6 +1495,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1494,6 +1526,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1506,7 +1541,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1520,16 +1554,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1537,6 +1570,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0bee3e30394..7016ce73260 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:28 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,9 +130,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,7 +249,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -401,6 +418,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -419,7 +437,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -444,6 +466,7 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -479,7 +502,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,10 +528,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -524,6 +545,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -532,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -551,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -635,14 +657,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -689,6 +714,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -708,8 +734,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -909,13 +937,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -943,76 +975,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1017,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1078,6 +1048,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1108,6 +1079,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1152,7 +1124,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1169,10 +1141,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1198,6 +1171,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1207,9 +1181,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1329,6 +1303,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1356,6 +1331,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1375,11 +1354,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1454,6 +1434,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1555,6 +1536,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1585,6 +1567,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1597,7 +1582,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1611,16 +1595,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1628,6 +1611,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index c30a0c71587..f5ca2e0cd40 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:27 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:26 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -142,6 +153,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -284,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -508,6 +527,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -564,7 +584,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -675,6 +699,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -709,7 +734,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -736,6 +763,7 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
+# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=y
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
@@ -747,14 +775,17 @@ CONFIG_DM_ZERO=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -801,6 +832,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -820,8 +852,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1018,13 +1052,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1079,6 +1117,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1127,23 +1166,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1207,6 +1232,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1236,8 +1265,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 # CONFIG_REISERFS_FS_SECURITY is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_STATS=y
@@ -1245,6 +1274,8 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 # CONFIG_OCFS2_FS_POSIX_ACL is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1318,6 +1349,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1409,6 +1441,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1434,10 +1467,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1449,7 +1486,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1463,17 +1499,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1482,9 +1517,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1505,7 +1544,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 74f7f7c6fdc..aece6bb5f73 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:50 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:47 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,12 +50,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +104,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,13 +138,18 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +254,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +295,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +370,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +473,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +491,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -556,11 +578,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -622,6 +644,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -644,22 +671,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -685,6 +697,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -696,12 +712,15 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -818,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -846,6 +866,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -857,7 +880,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -870,16 +892,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -888,9 +909,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 9ffa8de9280..8105360d53f 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:51 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:48 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -118,7 +123,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -131,16 +135,23 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -150,6 +161,11 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -162,7 +178,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -258,6 +274,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -279,9 +296,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -331,6 +348,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -583,6 +601,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -663,7 +682,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -772,6 +795,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -816,10 +840,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -836,6 +856,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
 CONFIG_SCSI_3W_9XXX=m
 CONFIG_SCSI_ACARD=m
@@ -854,6 +875,7 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000
 CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 CONFIG_SCSI_ARCMSR=m
@@ -875,7 +897,6 @@ CONFIG_SCSI_GDTH=m
 CONFIG_SCSI_IPS=m
 CONFIG_SCSI_INITIO=m
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -903,14 +924,17 @@ CONFIG_SCSI_LPFC=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -957,6 +981,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -976,6 +1001,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1177,13 +1203,17 @@ CONFIG_I2C_MV64XXX=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1238,6 +1268,7 @@ CONFIG_SENSORS_SMSC47M1=m
 CONFIG_SENSORS_SMSC47B397=m
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 CONFIG_SENSORS_VIA686A=m
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1266,7 +1297,6 @@ CONFIG_SOFT_WATCHDOG=m
 #
 CONFIG_PCIPCWATCHDOG=m
 CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
 
 #
 # USB-based Watchdog Cards
@@ -1289,23 +1319,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1354,6 +1370,7 @@ CONFIG_USB_MON=m
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1362,9 +1379,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1545,6 +1562,10 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1563,11 +1584,12 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1652,6 +1674,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1764,6 +1787,7 @@ CONFIG_HAS_DMA=y
 CONFIG_CHECK_SIGNATURE=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1794,6 +1818,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_STACKTRACE=y
@@ -1807,7 +1834,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1824,30 +1850,34 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1869,7 +1899,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 04915c3a43f..0aa5b43ffeb 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:52 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -127,6 +138,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -134,7 +149,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -213,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -228,9 +244,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,6 +316,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -380,7 +397,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -485,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,13 +542,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -573,6 +599,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -594,8 +621,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -685,6 +714,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -728,22 +761,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -771,6 +789,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -787,9 +809,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -935,6 +958,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -960,6 +984,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -971,7 +998,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -985,22 +1011,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c2a439595f4..2c292e25cc0 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:53 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +233,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +253,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +294,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +369,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +472,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +490,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +528,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -579,6 +600,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -602,22 +628,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -642,6 +653,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -653,12 +668,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -775,6 +793,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -803,6 +822,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -814,7 +836,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,16 +848,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -844,6 +864,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index a4053ab9e24..45671e7dd2c 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:54 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:50 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -237,6 +252,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -257,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -480,6 +496,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -498,7 +515,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -647,7 +668,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -670,10 +693,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -691,6 +710,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -699,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -718,7 +739,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -802,14 +822,17 @@ CONFIG_PATA_SIL680=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -846,6 +869,7 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -865,8 +889,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1074,13 +1100,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1135,6 +1165,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1169,23 +1200,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1245,6 +1262,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1254,9 +1272,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1423,6 +1441,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1450,6 +1469,10 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1469,14 +1492,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1548,6 +1573,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
@@ -1578,7 +1604,7 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1645,6 +1671,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1675,6 +1702,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1686,7 +1716,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1700,16 +1729,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1717,6 +1745,8 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 31e1df66515..e9491c1c3f3 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:51 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -105,7 +110,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -225,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -313,6 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -484,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +604,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -654,6 +682,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -697,22 +729,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -740,6 +757,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -757,9 +778,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +938,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -941,6 +964,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -952,7 +978,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -966,16 +991,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -983,9 +1007,12 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 24fa90792c5..1ae85a3b294 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:52 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -102,7 +105,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -115,7 +117,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -129,6 +138,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -136,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +236,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -241,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -342,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -359,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +484,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -492,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 # CONFIG_FS_ENET_HAS_FEC is not set
@@ -602,6 +624,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -625,22 +652,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -665,6 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -687,10 +703,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -823,6 +841,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -844,24 +863,14 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 642ab67c843..f23428c3b34 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:56 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:53 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -106,7 +111,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,9 +123,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +235,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +382,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +406,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -416,6 +438,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -438,10 +461,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -458,6 +477,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -466,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -485,7 +506,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -568,14 +588,17 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -642,6 +665,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -663,7 +687,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -785,6 +811,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -824,22 +855,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -896,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -915,11 +935,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1038,6 +1059,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1063,22 +1085,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index cb966ca2ce8..02716f72db6 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:57 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:54 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,9 +116,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,6 +139,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -135,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -216,6 +231,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -231,9 +247,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -303,6 +319,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -383,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -489,6 +510,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -524,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +603,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -598,8 +625,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -671,12 +700,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,6 +771,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -784,22 +818,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -828,6 +847,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -847,9 +870,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -998,6 +1022,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1028,6 +1053,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1039,7 +1067,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1053,22 +1080,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 433c303eb82..4a96cb6925b 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:58 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,6 +57,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -61,6 +65,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +115,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +127,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -192,6 +207,7 @@ CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
@@ -241,6 +257,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -261,9 +278,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -374,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -391,7 +409,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -507,6 +529,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -542,7 +565,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -565,10 +590,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -586,6 +607,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -594,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -613,7 +636,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -697,14 +719,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -751,6 +776,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -770,11 +796,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -965,13 +993,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1050,6 +1082,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1104,24 +1137,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1159,7 +1177,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1176,10 +1194,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1205,6 +1224,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1291,6 +1311,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1310,10 +1334,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1377,6 +1403,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1413,7 +1440,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
@@ -1438,6 +1504,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1461,22 +1528,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c162724fed4..ada595898af 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:40:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -116,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -129,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -146,6 +155,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -158,7 +172,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -191,6 +205,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -241,7 +256,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -260,9 +277,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,7 +313,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -406,6 +424,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -424,7 +443,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -450,6 +473,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -485,7 +509,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -509,10 +535,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -530,6 +552,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -538,6 +561,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -557,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -641,14 +664,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,6 +721,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -718,11 +745,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -897,6 +926,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -927,13 +957,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -987,76 +1021,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1096,6 +1063,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1122,6 +1094,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1152,6 +1125,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1196,7 +1170,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1213,10 +1187,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1242,6 +1217,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1251,9 +1227,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1352,8 +1328,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1359,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1400,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1445,11 +1424,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1524,6 +1504,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1628,6 +1609,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1658,6 +1640,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1670,7 +1655,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1684,16 +1668,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,9 +1685,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 1aa1c508d60..db082ce5a1c 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:41:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:56 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -58,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -117,7 +120,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -130,9 +132,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -148,6 +157,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -161,7 +175,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,6 +208,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -244,7 +259,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -264,9 +281,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,7 +317,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -410,6 +428,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -428,7 +447,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -454,6 +477,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -489,7 +513,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -513,10 +539,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -534,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -542,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -561,7 +585,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -645,14 +668,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -699,6 +725,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -722,11 +749,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -901,6 +930,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -931,13 +961,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -991,76 +1025,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1100,6 +1067,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1126,6 +1098,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1156,6 +1129,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1200,7 +1174,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1217,10 +1191,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1246,6 +1221,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1255,9 +1231,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1356,8 +1332,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1389,6 +1363,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1429,6 +1404,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1449,11 +1428,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1528,6 +1508,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1632,6 +1613,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1662,6 +1644,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1674,7 +1659,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1688,16 +1672,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1706,9 +1689,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 3add6f62b21..6809b61ed3d 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:57 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -98,7 +101,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -111,8 +113,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -126,6 +135,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -133,7 +146,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -219,6 +232,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -238,9 +252,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +292,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -339,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -356,7 +372,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -374,6 +394,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -407,7 +428,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,6 +466,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
@@ -453,6 +474,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -496,11 +518,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -562,6 +584,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -597,22 +624,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -664,6 +676,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -685,10 +701,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -808,6 +826,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -831,22 +850,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5bb1b8eb0b4..0e8684a3138 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:58 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +155,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +172,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -236,7 +251,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +275,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -403,6 +420,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +439,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -447,6 +469,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -482,7 +505,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,10 +531,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -527,6 +548,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -535,6 +557,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -554,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -638,14 +660,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -692,6 +717,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -711,8 +737,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -913,13 +941,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -973,76 +1005,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1082,6 +1047,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1108,6 +1078,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1138,6 +1109,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1182,7 +1154,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1199,10 +1171,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1228,6 +1201,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1237,9 +1211,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1360,6 +1334,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1387,6 +1362,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1406,11 +1385,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1485,6 +1465,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1586,6 +1567,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1616,6 +1598,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1628,7 +1613,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1642,16 +1626,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1659,6 +1642,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 42e64ebc279..dbe8e869a82 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:01 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:59 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -227,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -246,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +301,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -343,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -360,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -480,7 +501,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -519,6 +539,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -590,6 +611,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -613,22 +639,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -653,6 +664,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -664,12 +679,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -786,6 +804,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -814,6 +833,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -825,7 +847,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -838,16 +859,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -855,6 +875,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 129d80860f2..ff96bb43c32 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:02 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:00 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -103,7 +108,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -116,9 +120,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -132,6 +143,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -139,7 +154,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -219,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -234,9 +250,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -307,6 +323,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -387,7 +404,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -493,6 +514,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -518,6 +540,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -583,13 +606,17 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -636,6 +663,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -657,8 +685,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -730,12 +760,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -802,6 +833,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -845,22 +880,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -903,8 +923,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -912,9 +933,11 @@ CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -939,6 +962,10 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -958,9 +985,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1110,6 +1138,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1140,6 +1169,9 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1151,7 +1183,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1165,22 +1196,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e9f287f313f..1293c465d7f 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:03 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_ANON_INODES=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +153,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +164,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -228,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -249,9 +265,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,6 +312,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -357,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -479,6 +501,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -514,7 +537,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -591,10 +616,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -611,6 +632,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -619,6 +641,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -638,7 +661,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -721,7 +743,11 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -730,7 +756,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -797,6 +822,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -818,6 +844,7 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1007,13 +1034,17 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1068,6 +1099,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1102,23 +1134,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1163,6 +1181,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
@@ -1180,9 +1199,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=y
 CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1207,6 +1231,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1215,6 +1240,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1322,6 +1349,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1349,6 +1377,10 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1368,11 +1400,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1469,7 +1502,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1494,6 +1566,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1519,22 +1592,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index bd4a8d435c5..28384dc0100 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +106,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,9 +118,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,6 +140,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +237,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -347,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -364,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -501,7 +522,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -579,10 +602,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -599,6 +618,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -607,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -626,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -660,14 +680,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,8 +718,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -845,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -879,23 +908,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -937,6 +952,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -946,6 +962,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1064,6 +1082,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1091,6 +1110,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1110,7 +1133,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1119,6 +1141,8 @@ CONFIG_XFS_FS=m
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1273,6 +1297,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1298,22 +1323,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
-- 
cgit v1.2.3


From 2e04ef76916d1e29a077ea9d0f2003c8fd86724d Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 30 Jul 2009 16:03:45 -0600
Subject: lguest: fix comment style

I don't really notice it (except to begrudge the extra vertical
space), but Ingo does.  And he pointed out that one excuse of lguest
is as a teaching tool, it should set a good example.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
---
 arch/x86/include/asm/lguest.h       |   3 +-
 arch/x86/include/asm/lguest_hcall.h |  10 +-
 arch/x86/lguest/boot.c              | 428 +++++++++++++++++++++++-------------
 arch/x86/lguest/i386_head.S         | 110 +++++----
 4 files changed, 353 insertions(+), 198 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389cd50d..5136dad57cb 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,7 @@
 /* Pages for switcher itself, then two pages per cpu */
 #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
 
-/* We map at -4M (-2M when PAE is activated) for ease of mapping
- * into the guest (one PTE page). */
+/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */
 #ifdef CONFIG_X86_PAE
 #define SWITCHER_ADDR 0xFFE00000
 #else
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index 33600a66755..cceb73e12e5 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -30,7 +30,8 @@
 #include <asm/hw_irq.h>
 #include <asm/kvm_para.h>
 
-/*G:030 But first, how does our Guest contact the Host to ask for privileged
+/*G:030
+ * But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
@@ -41,16 +42,15 @@
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-/*:*/
+ * definition of a gentleman: "someone who is only rude intentionally".
+:*/
 
 /* Can't use our min() macro here: needs to be a constant */
 #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
 
 #define LHCALL_RING_SIZE 64
 struct hcall_args {
-	/* These map directly onto eax, ebx, ecx, edx and esi
-	 * in struct lguest_regs */
+	/* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */
 	unsigned long arg0, arg1, arg2, arg3, arg4;
 };
 
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index f2bf1f73d46..025c04d18f2 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -22,7 +22,8 @@
  *
  * So how does the kernel know it's a Guest?  We'll see that later, but let's
  * just say that we end up here where we replace the native functions various
- * "paravirt" structures with our Guest versions, then boot like normal. :*/
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
 
 /*
  * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -74,7 +75,8 @@
  *
  * The Guest in our tale is a simple creature: identical to the Host but
  * behaving in simplified but equivalent ways.  In particular, the Guest is the
- * same kernel as the Host (or at least, built from the same source code). :*/
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
 
 struct lguest_data lguest_data = {
 	.hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
@@ -85,7 +87,8 @@ struct lguest_data lguest_data = {
 	.syscall_vec = SYSCALL_VECTOR,
 };
 
-/*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
  * do a normal hypercall.  Each entry in the ring has 5 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
@@ -94,7 +97,8 @@ struct lguest_data lguest_data = {
  * If we come around to a slot which hasn't been finished, then the table is
  * full and we just make the hypercall directly.  This has the nice side
  * effect of causing the Host to run all the stored calls in the ring buffer
- * which empties it for next time! */
+ * which empties it for next time!
+ */
 static void async_hcall(unsigned long call, unsigned long arg1,
 			unsigned long arg2, unsigned long arg3,
 			unsigned long arg4)
@@ -103,9 +107,11 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	static unsigned int next_call;
 	unsigned long flags;
 
-	/* Disable interrupts if not already disabled: we don't want an
+	/*
+	 * Disable interrupts if not already disabled: we don't want an
 	 * interrupt handler making a hypercall while we're already doing
-	 * one! */
+	 * one!
+	 */
 	local_irq_save(flags);
 	if (lguest_data.hcall_status[next_call] != 0xFF) {
 		/* Table full, so do normal hcall which will flush table. */
@@ -125,8 +131,9 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	local_irq_restore(flags);
 }
 
-/*G:035 Notice the lazy_hcall() above, rather than hcall().  This is our first
- * real optimization trick!
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall().  This is our first real
+ * optimization trick!
  *
  * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
  * them as a batch when lazy_mode is eventually turned off.  Because hypercalls
@@ -136,7 +143,8 @@ static void async_hcall(unsigned long call, unsigned long arg1,
  * lguest_leave_lazy_mode().
  *
  * So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing: */
+ * future processing:
+ */
 static void lazy_hcall1(unsigned long call,
 		       unsigned long arg1)
 {
@@ -208,9 +216,11 @@ static void lguest_end_context_switch(struct task_struct *next)
  * check there before it tries to deliver an interrupt.
  */
 
-/* save_flags() is expected to return the processor state (ie. "flags").  The
+/*
+ * save_flags() is expected to return the processor state (ie. "flags").  The
  * flags word contains all kind of stuff, but in practice Linux only cares
- * about the interrupt flag.  Our "save_flags()" just returns that. */
+ * about the interrupt flag.  Our "save_flags()" just returns that.
+ */
 static unsigned long save_fl(void)
 {
 	return lguest_data.irq_enabled;
@@ -222,13 +232,15 @@ static void irq_disable(void)
 	lguest_data.irq_enabled = 0;
 }
 
-/* Let's pause a moment.  Remember how I said these are called so often?
+/*
+ * Let's pause a moment.  Remember how I said these are called so often?
  * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
  * break some rules.  In particular, these functions are assumed to save their
  * own registers if they need to: normal C functions assume they can trash the
  * eax register.  To use normal C functions, we use
  * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
- * C function, then restores it. */
+ * C function, then restores it.
+ */
 PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 /*:*/
@@ -237,18 +249,20 @@ PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 extern void lg_irq_enable(void);
 extern void lg_restore_fl(unsigned long flags);
 
-/*M:003 Note that we don't check for outstanding interrupts when we re-enable
- * them (or when we unmask an interrupt).  This seems to work for the moment,
- * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but now we can run with CONFIG_NO_HZ, we should revisit this.  One way
- * would be to put the "irq_enabled" field in a page by itself, and have the
- * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled.
+/*M:003
+ * Note that we don't check for outstanding interrupts when we re-enable them
+ * (or when we unmask an interrupt).  This seems to work for the moment, since
+ * interrupts are rare and we'll just get the interrupt on the next timer tick,
+ * but now we can run with CONFIG_NO_HZ, we should revisit this.  One way would
+ * be to put the "irq_enabled" field in a page by itself, and have the Host
+ * write-protect it when an interrupt comes in when irqs are disabled.  There
+ * will then be a page fault as soon as interrupts are re-enabled.
  *
  * A better method is to implement soft interrupt disable generally for x86:
  * instead of disabling interrupts, we set a flag.  If an interrupt does come
  * in, we then disable them for real.  This is uncommon, so we could simply use
- * a hypercall for interrupt control and not worry about efficiency. :*/
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
 
 /*G:034
  * The Interrupt Descriptor Table (IDT).
@@ -261,10 +275,12 @@ extern void lg_restore_fl(unsigned long flags);
 static void lguest_write_idt_entry(gate_desc *dt,
 				   int entrynum, const gate_desc *g)
 {
-	/* The gate_desc structure is 8 bytes long: we hand it to the Host in
+	/*
+	 * The gate_desc structure is 8 bytes long: we hand it to the Host in
 	 * two 32-bit chunks.  The whole 32-bit kernel used to hand descriptors
 	 * around like this; typesafety wasn't a big concern in Linux's early
-	 * years. */
+	 * years.
+	 */
 	u32 *desc = (u32 *)g;
 	/* Keep the local copy up to date. */
 	native_write_idt_entry(dt, entrynum, g);
@@ -272,9 +288,11 @@ static void lguest_write_idt_entry(gate_desc *dt,
 	kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
 }
 
-/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
  * time it is written, so we can simply loop through all entries and tell the
- * Host about them. */
+ * Host about them.
+ */
 static void lguest_load_idt(const struct desc_ptr *desc)
 {
 	unsigned int i;
@@ -305,9 +323,11 @@ static void lguest_load_gdt(const struct desc_ptr *desc)
 		kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
 }
 
-/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
+/*
+ * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
  * then tell the Host to reload the entire thing.  This operation is so rare
- * that this naive implementation is reasonable. */
+ * that this naive implementation is reasonable.
+ */
 static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 				   const void *desc, int type)
 {
@@ -317,29 +337,36 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 		       dt[entrynum].a, dt[entrynum].b);
 }
 
-/* OK, I lied.  There are three "thread local storage" GDT entries which change
+/*
+ * OK, I lied.  There are three "thread local storage" GDT entries which change
  * on every context switch (these three entries are how glibc implements
- * __thread variables).  So we have a hypercall specifically for this case. */
+ * __thread variables).  So we have a hypercall specifically for this case.
+ */
 static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-	/* There's one problem which normal hardware doesn't have: the Host
+	/*
+	 * There's one problem which normal hardware doesn't have: the Host
 	 * can't handle us removing entries we're currently using.  So we clear
-	 * the GS register here: if it's needed it'll be reloaded anyway. */
+	 * the GS register here: if it's needed it'll be reloaded anyway.
+	 */
 	lazy_load_gs(0);
 	lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
 }
 
-/*G:038 That's enough excitement for now, back to ploughing through each of
- * the different pv_ops structures (we're about 1/3 of the way through).
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
  *
  * This is the Local Descriptor Table, another weird Intel thingy.  Linux only
  * uses this for some strange applications like Wine.  We don't do anything
- * here, so they'll get an informative and friendly Segmentation Fault. */
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
 static void lguest_set_ldt(const void *addr, unsigned entries)
 {
 }
 
-/* This loads a GDT entry into the "Task Register": that entry points to a
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
  * structure called the Task State Segment.  Some comments scattered though the
  * kernel code indicate that this used for task switching in ages past, along
  * with blood sacrifice and astrology.
@@ -347,19 +374,21 @@ static void lguest_set_ldt(const void *addr, unsigned entries)
  * Now there's nothing interesting in here that we don't get told elsewhere.
  * But the native version uses the "ltr" instruction, which makes the Host
  * complain to the Guest about a Segmentation Fault and it'll oops.  So we
- * override the native version with a do-nothing version. */
+ * override the native version with a do-nothing version.
+ */
 static void lguest_load_tr_desc(void)
 {
 }
 
-/* The "cpuid" instruction is a way of querying both the CPU identity
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
  * (manufacturer, model, etc) and its features.  It was introduced before the
  * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
  * As you might imagine, after a decade and a half this treatment, it is now a
  * giant ball of hair.  Its entry in the current Intel manual runs to 28 pages.
  *
  * This instruction even it has its own Wikipedia entry.  The Wikipedia entry
- * has been translated into 4 languages.  I am not making this up!
+ * has been translated into 5 languages.  I am not making this up!
  *
  * We could get funky here and identify ourselves as "GenuineLguest", but
  * instead we just use the real "cpuid" instruction.  Then I pretty much turned
@@ -371,7 +400,8 @@ static void lguest_load_tr_desc(void)
  * Replacing the cpuid so we can turn features off is great for the kernel, but
  * anyone (including userspace) can just use the raw "cpuid" instruction and
  * the Host won't even notice since it isn't privileged.  So we try not to get
- * too worked up about it. */
+ * too worked up about it.
+ */
 static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 			 unsigned int *cx, unsigned int *dx)
 {
@@ -379,43 +409,63 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 
 	native_cpuid(ax, bx, cx, dx);
 	switch (function) {
-	case 0: /* ID and highest CPUID.  Futureproof a little by sticking to
-		 * older ones. */
+	/*
+	 * CPUID 0 gives the highest legal CPUID number (and the ID string).
+	 * We futureproof our code a little by sticking to known CPUID values.
+	 */
+	case 0:
 		if (*ax > 5)
 			*ax = 5;
 		break;
-	case 1:	/* Basic feature request. */
-		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
+
+	/*
+	 * CPUID 1 is a basic feature request.
+	 *
+	 * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+	 * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+	 */
+	case 1:
 		*cx &= 0x00002201;
-		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
 		*dx &= 0x07808151;
-		/* The Host can do a nice optimization if it knows that the
+		/*
+		 * The Host can do a nice optimization if it knows that the
 		 * kernel mappings (addresses above 0xC0000000 or whatever
 		 * PAGE_OFFSET is set to) haven't changed.  But Linux calls
 		 * flush_tlb_user() for both user and kernel mappings unless
-		 * the Page Global Enable (PGE) feature bit is set. */
+		 * the Page Global Enable (PGE) feature bit is set.
+		 */
 		*dx |= 0x00002000;
-		/* We also lie, and say we're family id 5.  6 or greater
+		/*
+		 * We also lie, and say we're family id 5.  6 or greater
 		 * leads to a rdmsr in early_init_intel which we can't handle.
-		 * Family ID is returned as bits 8-12 in ax. */
+		 * Family ID is returned as bits 8-12 in ax.
+		 */
 		*ax &= 0xFFFFF0FF;
 		*ax |= 0x00000500;
 		break;
+	/*
+	 * 0x80000000 returns the highest Extended Function, so we futureproof
+	 * like we do above by limiting it to known fields.
+	 */
 	case 0x80000000:
-		/* Futureproof this a little: if they ask how much extended
-		 * processor information there is, limit it to known fields. */
 		if (*ax > 0x80000008)
 			*ax = 0x80000008;
 		break;
+
+	/*
+	 * PAE systems can mark pages as non-executable.  Linux calls this the
+	 * NX bit.  Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+	 * Virus Protection).  We just switch turn if off here, since we don't
+	 * support it.
+	 */
 	case 0x80000001:
-		/* Here we should fix nx cap depending on host. */
-		/* For this version of PAE, we just clear NX bit. */
 		*dx &= ~(1 << 20);
 		break;
 	}
 }
 
-/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
  * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
  * it.  The Host needs to know when the Guest wants to change them, so we have
  * a whole series of functions like read_cr0() and write_cr0().
@@ -430,7 +480,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
  * name like "FPUTRAP bit" be a little less cryptic?
  *
  * We store cr0 locally because the Host never changes it.  The Guest sometimes
- * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
 static unsigned long current_cr0;
 static void lguest_write_cr0(unsigned long val)
 {
@@ -443,18 +494,22 @@ static unsigned long lguest_read_cr0(void)
 	return current_cr0;
 }
 
-/* Intel provided a special instruction to clear the TS bit for people too cool
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
  * to use write_cr0() to do it.  This "clts" instruction is faster, because all
- * the vowels have been optimized out. */
+ * the vowels have been optimized out.
+ */
 static void lguest_clts(void)
 {
 	lazy_hcall1(LHCALL_TS, 0);
 	current_cr0 &= ~X86_CR0_TS;
 }
 
-/* cr2 is the virtual address of the last page fault, which the Guest only ever
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
  * reads.  The Host kindly writes this into our "struct lguest_data", so we
- * just read it out of there. */
+ * just read it out of there.
+ */
 static unsigned long lguest_read_cr2(void)
 {
 	return lguest_data.cr2;
@@ -463,10 +518,12 @@ static unsigned long lguest_read_cr2(void)
 /* See lguest_set_pte() below. */
 static bool cr3_changed = false;
 
-/* cr3 is the current toplevel pagetable page: the principle is the same as
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
  * cr0.  Keep a local copy, and tell the Host when it changes.  The only
  * difference is that our local copy is in lguest_data because the Host needs
- * to set it upon our initial hypercall. */
+ * to set it upon our initial hypercall.
+ */
 static void lguest_write_cr3(unsigned long cr3)
 {
 	lguest_data.pgdir = cr3;
@@ -538,10 +595,12 @@ static void lguest_write_cr4(unsigned long val)
  * the real page tables based on the Guests'.
  */
 
-/* The Guest calls this to set a second-level entry (pte), ie. to map a page
+/*
+ * The Guest calls this to set a second-level entry (pte), ie. to map a page
  * into a process' address space.  We set the entry then tell the Host the
  * toplevel and address this corresponds to.  The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd). */
+ * process, so we need to tell the Host which one we're changing (mm->pgd).
+ */
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 			       pte_t *ptep)
 {
@@ -560,10 +619,13 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 	lguest_pte_update(mm, addr, ptep);
 }
 
-/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
  * to set a middle-level entry when PAE is activated.
+ *
  * Again, we set the entry then tell the Host which page we changed,
- * and the index of the entry we changed. */
+ * and the index of the entry we changed.
+ */
 #ifdef CONFIG_X86_PAE
 static void lguest_set_pud(pud_t *pudp, pud_t pudval)
 {
@@ -582,8 +644,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #else
 
-/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
- * activated. */
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
 	native_set_pmd(pmdp, pmdval);
@@ -592,7 +653,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #endif
 
-/* There are a couple of legacy places where the kernel sets a PTE, but we
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
  * don't know the top level any more.  This is useless for us, since we don't
  * know which pagetable is changing or what address, so we just tell the Host
  * to forget all of them.  Fortunately, this is very rare.
@@ -600,7 +662,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * ... except in early boot when the kernel sets up the initial pagetables,
  * which makes booting astonishingly slow: 1.83 seconds!  So we don't even tell
  * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds. */
+ * which brings boot back to 0.25 seconds.
+ */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
 	native_set_pte(ptep, pteval);
@@ -628,7 +691,8 @@ void lguest_pmd_clear(pmd_t *pmdp)
 }
 #endif
 
-/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
  * native page table operations.  On native hardware you can set a new page
  * table entry whenever you want, but if you want to remove one you have to do
  * a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
@@ -637,24 +701,29 @@ void lguest_pmd_clear(pmd_t *pmdp)
  * called when a valid entry is written, not when it's removed (ie. marked not
  * present).  Instead, this is where we come when the Guest wants to remove a
  * page table entry: we tell the Host to set that entry to 0 (ie. the present
- * bit is zero). */
+ * bit is zero).
+ */
 static void lguest_flush_tlb_single(unsigned long addr)
 {
 	/* Simply set it to zero: if it was not, it will fault back in. */
 	lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
 }
 
-/* This is what happens after the Guest has removed a large number of entries.
+/*
+ * This is what happens after the Guest has removed a large number of entries.
  * This tells the Host that any of the page table entries for userspace might
- * have changed, ie. virtual addresses below PAGE_OFFSET. */
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
 static void lguest_flush_tlb_user(void)
 {
 	lazy_hcall1(LHCALL_FLUSH_TLB, 0);
 }
 
-/* This is called when the kernel page tables have changed.  That's not very
+/*
+ * This is called when the kernel page tables have changed.  That's not very
  * common (unless the Guest is using highmem, which makes the Guest extremely
- * slow), so it's worth separating this from the user flushing above. */
+ * slow), so it's worth separating this from the user flushing above.
+ */
 static void lguest_flush_tlb_kernel(void)
 {
 	lazy_hcall1(LHCALL_FLUSH_TLB, 1);
@@ -691,23 +760,27 @@ static struct irq_chip lguest_irq_controller = {
 	.unmask		= enable_lguest_irq,
 };
 
-/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
  * interrupt (except 128, which is used for system calls), and then tells the
  * Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller. */
+ * lguest interrupt controller.
+ */
 static void __init lguest_init_IRQ(void)
 {
 	unsigned int i;
 
 	for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
-		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
-		 * a straightforward 1 to 1 mapping, so force that here. */
+		/* Some systems map "vectors" to interrupts weirdly.  Not us! */
 		__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
 		if (i != SYSCALL_VECTOR)
 			set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
-	/* This call is required to set up for 4k stacks, where we have
-	 * separate stacks for hard and soft interrupts. */
+
+	/*
+	 * This call is required to set up for 4k stacks, where we have
+	 * separate stacks for hard and soft interrupts.
+	 */
 	irq_ctx_init(smp_processor_id());
 }
 
@@ -729,31 +802,39 @@ static unsigned long lguest_get_wallclock(void)
 	return lguest_data.time.tv_sec;
 }
 
-/* The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
  * what speed it runs at, or 0 if it's unusable as a reliable clock source.
  * This matches what we want here: if we return 0 from this function, the x86
- * TSC clock will give up and not register itself. */
+ * TSC clock will give up and not register itself.
+ */
 static unsigned long lguest_tsc_khz(void)
 {
 	return lguest_data.tsc_khz;
 }
 
-/* If we can't use the TSC, the kernel falls back to our lower-priority
- * "lguest_clock", where we read the time value given to us by the Host. */
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
 static cycle_t lguest_clock_read(struct clocksource *cs)
 {
 	unsigned long sec, nsec;
 
-	/* Since the time is in two parts (seconds and nanoseconds), we risk
+	/*
+	 * Since the time is in two parts (seconds and nanoseconds), we risk
 	 * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
 	 * and getting 99 and 0.  As Linux tends to come apart under the stress
-	 * of time travel, we must be careful: */
+	 * of time travel, we must be careful:
+	 */
 	do {
 		/* First we read the seconds part. */
 		sec = lguest_data.time.tv_sec;
-		/* This read memory barrier tells the compiler and the CPU that
+		/*
+		 * This read memory barrier tells the compiler and the CPU that
 		 * this can't be reordered: we have to complete the above
-		 * before going on. */
+		 * before going on.
+		 */
 		rmb();
 		/* Now we read the nanoseconds part. */
 		nsec = lguest_data.time.tv_nsec;
@@ -777,9 +858,11 @@ static struct clocksource lguest_clock = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/* We also need a "struct clock_event_device": Linux asks us to set it to go
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
  * off some time in the future.  Actually, James Morris figured all this out, I
- * just applied the patch. */
+ * just applied the patch.
+ */
 static int lguest_clockevent_set_next_event(unsigned long delta,
                                            struct clock_event_device *evt)
 {
@@ -829,8 +912,10 @@ static struct clock_event_device lguest_clockevent = {
 	.max_delta_ns           = LG_CLOCK_MAX_DELTA,
 };
 
-/* This is the Guest timer interrupt handler (hardware interrupt 0).  We just
- * call the clockevent infrastructure and it does whatever needs doing. */
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0).  We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
 static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long flags;
@@ -841,10 +926,12 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 	local_irq_restore(flags);
 }
 
-/* At some point in the boot process, we get asked to set up our timing
+/*
+ * At some point in the boot process, we get asked to set up our timing
  * infrastructure.  The kernel doesn't expect timer interrupts before this, but
  * we cleverly initialized the "blocked_interrupts" field of "struct
- * lguest_data" so that timer interrupts were blocked until now. */
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
 static void lguest_time_init(void)
 {
 	/* Set up the timer interrupt (0) to go to our simple timer routine */
@@ -868,14 +955,16 @@ static void lguest_time_init(void)
  * to work.  They're pretty simple.
  */
 
-/* The Guest needs to tell the Host what stack it expects traps to use.  For
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use.  For
  * native hardware, this is part of the Task State Segment mentioned above in
  * lguest_load_tr_desc(), but to help hypervisors there's this special call.
  *
  * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
  * segment), the privilege level (we're privilege level 1, the Host is 0 and
  * will not tolerate us trying to use that), the stack pointer, and the number
- * of pages in the stack. */
+ * of pages in the stack.
+ */
 static void lguest_load_sp0(struct tss_struct *tss,
 			    struct thread_struct *thread)
 {
@@ -889,7 +978,8 @@ static void lguest_set_debugreg(int regno, unsigned long value)
 	/* FIXME: Implement */
 }
 
-/* There are times when the kernel wants to make sure that no memory writes are
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
  * caught in the cache (that they've all reached real hardware devices).  This
  * doesn't matter for the Guest which has virtual hardware.
  *
@@ -903,11 +993,13 @@ static void lguest_wbinvd(void)
 {
 }
 
-/* If the Guest expects to have an Advanced Programmable Interrupt Controller,
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
  * we play dumb by ignoring writes and returning 0 for reads.  So it's no
  * longer Programmable nor Controlling anything, and I don't think 8 lines of
  * code qualifies for Advanced.  It will also never interrupt anything.  It
- * does, however, allow us to get through the Linux boot code. */
+ * does, however, allow us to get through the Linux boot code.
+ */
 #ifdef CONFIG_X86_LOCAL_APIC
 static void lguest_apic_write(u32 reg, u32 v)
 {
@@ -956,11 +1048,13 @@ static void lguest_safe_halt(void)
 	kvm_hypercall0(LHCALL_HALT);
 }
 
-/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
  * an argument which says whether this to restart (reboot) the Guest or not.
  *
  * Note that the Host always prefers that the Guest speak in physical addresses
- * rather than virtual addresses, so we use __pa() here. */
+ * rather than virtual addresses, so we use __pa() here.
+ */
 static void lguest_power_off(void)
 {
 	kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
@@ -991,8 +1085,10 @@ static __init char *lguest_memory_setup(void)
 	 * nice to move it back to lguest_init.  Patch welcome... */
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
-	/* The Linux bootloader header contains an "e820" memory map: the
-	 * Launcher populated the first entry with our memory limit. */
+	/*
+	 *The Linux bootloader header contains an "e820" memory map: the
+	 * Launcher populated the first entry with our memory limit.
+	 */
 	e820_add_region(boot_params.e820_map[0].addr,
 			  boot_params.e820_map[0].size,
 			  boot_params.e820_map[0].type);
@@ -1001,16 +1097,17 @@ static __init char *lguest_memory_setup(void)
 	return "LGUEST";
 }
 
-/* We will eventually use the virtio console device to produce console output,
+/*
+ * We will eventually use the virtio console device to produce console output,
  * but before that is set up we use LHCALL_NOTIFY on normal memory to produce
- * console output. */
+ * console output.
+ */
 static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 {
 	char scratch[17];
 	unsigned int len = count;
 
-	/* We use a nul-terminated string, so we have to make a copy.  Icky,
-	 * huh? */
+	/* We use a nul-terminated string, so we make a copy.  Icky, huh? */
 	if (len > sizeof(scratch) - 1)
 		len = sizeof(scratch) - 1;
 	scratch[len] = '\0';
@@ -1021,8 +1118,10 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 	return len;
 }
 
-/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
- * Launcher to reboot us. */
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
 static void lguest_restart(char *reason)
 {
 	kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
@@ -1049,7 +1148,8 @@ static void lguest_restart(char *reason)
  * fit comfortably.
  *
  * First we need assembly templates of each of the patchable Guest operations,
- * and these are in i386_head.S. */
+ * and these are in i386_head.S.
+ */
 
 /*G:060 We construct a table from the assembler templates: */
 static const struct lguest_insns
@@ -1060,9 +1160,11 @@ static const struct lguest_insns
 	[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
 };
 
-/* Now our patch routine is fairly simple (based on the native one in
+/*
+ * Now our patch routine is fairly simple (based on the native one in
  * paravirt.c).  If we have a replacement, we copy it in and return how much of
- * the available space we used. */
+ * the available space we used.
+ */
 static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 			     unsigned long addr, unsigned len)
 {
@@ -1074,8 +1176,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 
 	insn_len = lguest_insns[type].end - lguest_insns[type].start;
 
-	/* Similarly if we can't fit replacement (shouldn't happen, but let's
-	 * be thorough). */
+	/* Similarly if it can't fit (doesn't happen, but let's be thorough). */
 	if (len < insn_len)
 		return paravirt_patch_default(type, clobber, ibuf, addr, len);
 
@@ -1084,22 +1185,28 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 	return insn_len;
 }
 
-/*G:029 Once we get to lguest_init(), we know we're a Guest.  The various
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest.  The various
  * pv_ops structures in the kernel provide points for (almost) every routine we
- * have to override to avoid privileged instructions. */
+ * have to override to avoid privileged instructions.
+ */
 __init void lguest_init(void)
 {
-	/* We're under lguest, paravirt is enabled, and we're running at
-	 * privilege level 1, not 0 as normal. */
+	/* We're under lguest. */
 	pv_info.name = "lguest";
+	/* Paravirt is enabled. */
 	pv_info.paravirt_enabled = 1;
+	/* We're running at privilege level 1, not 0 as normal. */
 	pv_info.kernel_rpl = 1;
+	/* Everyone except Xen runs with this set. */
 	pv_info.shared_kernel_pmd = 1;
 
-	/* We set up all the lguest overrides for sensitive operations.  These
-	 * are detailed with the operations themselves. */
+	/*
+	 * We set up all the lguest overrides for sensitive operations.  These
+	 * are detailed with the operations themselves.
+	 */
 
-	/* interrupt-related operations */
+	/* Interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
 	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
 	pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
@@ -1107,11 +1214,11 @@ __init void lguest_init(void)
 	pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
-	/* init-time operations */
+	/* Setup operations */
 	pv_init_ops.memory_setup = lguest_memory_setup;
 	pv_init_ops.patch = lguest_patch;
 
-	/* Intercepts of various cpu instructions */
+	/* Intercepts of various CPU instructions */
 	pv_cpu_ops.load_gdt = lguest_load_gdt;
 	pv_cpu_ops.cpuid = lguest_cpuid;
 	pv_cpu_ops.load_idt = lguest_load_idt;
@@ -1132,7 +1239,7 @@ __init void lguest_init(void)
 	pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
 	pv_cpu_ops.end_context_switch = lguest_end_context_switch;
 
-	/* pagetable management */
+	/* Pagetable management */
 	pv_mmu_ops.write_cr3 = lguest_write_cr3;
 	pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
 	pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
@@ -1154,54 +1261,71 @@ __init void lguest_init(void)
 	pv_mmu_ops.pte_update_defer = lguest_pte_update;
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	/* apic read/write intercepts */
+	/* APIC read/write intercepts */
 	set_lguest_basic_apic_ops();
 #endif
 
-	/* time operations */
+	/* Time operations */
 	pv_time_ops.get_wallclock = lguest_get_wallclock;
 	pv_time_ops.time_init = lguest_time_init;
 	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
-	/* Now is a good time to look at the implementations of these functions
-	 * before returning to the rest of lguest_init(). */
+	/*
+	 * Now is a good time to look at the implementations of these functions
+	 * before returning to the rest of lguest_init().
+	 */
 
-	/*G:070 Now we've seen all the paravirt_ops, we return to
+	/*G:070
+	 * Now we've seen all the paravirt_ops, we return to
 	 * lguest_init() where the rest of the fairly chaotic boot setup
-	 * occurs. */
+	 * occurs.
+	 */
 
-	/* The stack protector is a weird thing where gcc places a canary
+	/*
+	 * The stack protector is a weird thing where gcc places a canary
 	 * value on the stack and then checks it on return.  This file is
 	 * compiled with -fno-stack-protector it, so we got this far without
 	 * problems.  The value of the canary is kept at offset 20 from the
 	 * %gs register, so we need to set that up before calling C functions
-	 * in other files. */
+	 * in other files.
+	 */
 	setup_stack_canary_segment(0);
-	/* We could just call load_stack_canary_segment(), but we might as
-	 * call switch_to_new_gdt() which loads the whole table and sets up
-	 * the per-cpu segment descriptor register %fs as well. */
+
+	/*
+	 * We could just call load_stack_canary_segment(), but we might as well
+	 * call switch_to_new_gdt() which loads the whole table and sets up the
+	 * per-cpu segment descriptor register %fs as well.
+	 */
 	switch_to_new_gdt(0);
 
 	/* As described in head_32.S, we map the first 128M of memory. */
 	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
 
-	/* The Host<->Guest Switcher lives at the top of our address space, and
+	/*
+	 * The Host<->Guest Switcher lives at the top of our address space, and
 	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
-	 * it put the answer in lguest_data.reserve_mem  */
+	 * it put the answer in lguest_data.reserve_mem
+	 */
 	reserve_top_address(lguest_data.reserve_mem);
 
-	/* If we don't initialize the lock dependency checker now, it crashes
-	 * paravirt_disable_iospace. */
+	/*
+	 * If we don't initialize the lock dependency checker now, it crashes
+	 * paravirt_disable_iospace.
+	 */
 	lockdep_init();
 
-	/* The IDE code spends about 3 seconds probing for disks: if we reserve
+	/*
+	 * The IDE code spends about 3 seconds probing for disks: if we reserve
 	 * all the I/O ports up front it can't get them and so doesn't probe.
 	 * Other device drivers are similar (but less severe).  This cuts the
-	 * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */
+	 * kernel boot time on my machine from 4.1 seconds to 0.45 seconds.
+	 */
 	paravirt_disable_iospace();
 
-	/* This is messy CPU setup stuff which the native boot code does before
-	 * start_kernel, so we have to do, too: */
+	/*
+	 * This is messy CPU setup stuff which the native boot code does before
+	 * start_kernel, so we have to do, too:
+	 */
 	cpu_detect(&new_cpu_data);
 	/* head.S usually sets up the first capability word, so do it here. */
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
@@ -1218,22 +1342,28 @@ __init void lguest_init(void)
 	acpi_ht = 0;
 #endif
 
-	/* We set the preferred console to "hvc".  This is the "hypervisor
+	/*
+	 * We set the preferred console to "hvc".  This is the "hypervisor
 	 * virtual console" driver written by the PowerPC people, which we also
-	 * adapted for lguest's use. */
+	 * adapted for lguest's use.
+	 */
 	add_preferred_console("hvc", 0, NULL);
 
 	/* Register our very early console. */
 	virtio_cons_early_init(early_put_chars);
 
-	/* Last of all, we set the power management poweroff hook to point to
+	/*
+	 * Last of all, we set the power management poweroff hook to point to
 	 * the Guest routine to power off, and the reboot hook to our restart
-	 * routine. */
+	 * routine.
+	 */
 	pm_power_off = lguest_power_off;
 	machine_ops.restart = lguest_restart;
 
-	/* Now we're set up, call i386_start_kernel() in head32.c and we proceed
-	 * to boot as normal.  It never returns. */
+	/*
+	 * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+	 * to boot as normal.  It never returns.
+	 */
 	i386_start_kernel();
 }
 /*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index a9c8cfe61cd..db6aa95eb05 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,7 +5,8 @@
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 
-/*G:020 Our story starts with the kernel booting into startup_32 in
+/*G:020
+ * Our story starts with the kernel booting into startup_32 in
  * arch/x86/kernel/head_32.S.  It expects a boot header, which is created by
  * the bootloader (the Launcher in our case).
  *
@@ -21,11 +22,14 @@
  * data without remembering to subtract __PAGE_OFFSET!
  *
  * The .section line puts this code in .init.text so it will be discarded after
- * boot. */
+ * boot.
+ */
 .section .init.text, "ax", @progbits
 ENTRY(lguest_entry)
-	/* We make the "initialization" hypercall now to tell the Host about
-	 * us, and also find out where it put our page tables. */
+	/*
+	 * We make the "initialization" hypercall now to tell the Host about
+	 * us, and also find out where it put our page tables.
+	 */
 	movl $LHCALL_LGUEST_INIT, %eax
 	movl $lguest_data - __PAGE_OFFSET, %ebx
 	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
@@ -33,13 +37,14 @@ ENTRY(lguest_entry)
 	/* Set up the initial stack so we can run C code. */
 	movl $(init_thread_union+THREAD_SIZE),%esp
 
-	/* Jumps are relative, and we're running __PAGE_OFFSET too low at the
-	 * moment. */
+	/* Jumps are relative: we're running __PAGE_OFFSET too low. */
 	jmp lguest_init+__PAGE_OFFSET
 
-/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers.  These templates are put in the .text section: they can't be
- * discarded after boot as we may need to patch modules, too. */
+/*G:055
+ * We create a macro which puts the assembler code between lgstart_ and lgend_
+ * markers.  These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too.
+ */
 .text
 #define LGUEST_PATCH(name, insns...)			\
 	lgstart_##name:	insns; lgend_##name:;		\
@@ -48,58 +53,74 @@ ENTRY(lguest_entry)
 LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
 LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
 
-/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
- * matter for save_fl and irq_disable later).  If we write our routines
- * carefully in assembler, we can avoid clobbering any registers and avoid
- * jumping through the wrapper functions.
+/*G:033
+ * But using those wrappers is inefficient (we'll see why that doesn't matter
+ * for save_fl and irq_disable later).  If we write our routines carefully in
+ * assembler, we can avoid clobbering any registers and avoid jumping through
+ * the wrapper functions.
  *
  * I skipped over our first piece of assembler, but this one is worth studying
- * in a bit more detail so I'll describe in easy stages.  First, the routine
- * to enable interrupts: */
+ * in a bit more detail so I'll describe in easy stages.  First, the routine to
+ * enable interrupts:
+ */
 ENTRY(lg_irq_enable)
-	/* The reverse of irq_disable, this sets lguest_data.irq_enabled to
-	 * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+	/*
+	 * The reverse of irq_disable, this sets lguest_data.irq_enabled to
+	 * X86_EFLAGS_IF (ie. "Interrupts enabled").
+	 */
 	movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
-	/* But now we need to check if the Host wants to know: there might have
+	/*
+	 * But now we need to check if the Host wants to know: there might have
 	 * been interrupts waiting to be delivered, in which case it will have
 	 * set lguest_data.irq_pending to X86_EFLAGS_IF.  If it's not zero, we
-	 * jump to send_interrupts, otherwise we're done. */
+	 * jump to send_interrupts, otherwise we're done.
+	 */
 	testl $0, lguest_data+LGUEST_DATA_irq_pending
 	jnz send_interrupts
-	/* One cool thing about x86 is that you can do many things without using
+	/*
+	 * One cool thing about x86 is that you can do many things without using
 	 * a register.  In this case, the normal path hasn't needed to save or
-	 * restore any registers at all! */
+	 * restore any registers at all!
+	 */
 	ret
 send_interrupts:
-	/* OK, now we need a register: eax is used for the hypercall number,
+	/*
+	 * OK, now we need a register: eax is used for the hypercall number,
 	 * which is LHCALL_SEND_INTERRUPTS.
 	 *
 	 * We used not to bother with this pending detection at all, which was
 	 * much simpler.  Sooner or later the Host would realize it had to
 	 * send us an interrupt.  But that turns out to make performance 7
 	 * times worse on a simple tcp benchmark.  So now we do this the hard
-	 * way. */
+	 * way.
+	 */
 	pushl %eax
 	movl $LHCALL_SEND_INTERRUPTS, %eax
-	/* This is a vmcall instruction (same thing that KVM uses).  Older
+	/*
+	 * This is a vmcall instruction (same thing that KVM uses).  Older
 	 * assembler versions might not know the "vmcall" instruction, so we
-	 * create one manually here. */
+	 * create one manually here.
+	 */
 	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
 	popl %eax
 	ret
 
-/* Finally, the "popf" or "restore flags" routine.  The %eax register holds the
+/*
+ * Finally, the "popf" or "restore flags" routine.  The %eax register holds the
  * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
- * enabling interrupts again, if it's 0 we're leaving them off. */
+ * enabling interrupts again, if it's 0 we're leaving them off.
+ */
 ENTRY(lg_restore_fl)
 	/* This is just "lguest_data.irq_enabled = flags;" */
 	movl %eax, lguest_data+LGUEST_DATA_irq_enabled
-	/* Now, if the %eax value has enabled interrupts and
+	/*
+	 * Now, if the %eax value has enabled interrupts and
 	 * lguest_data.irq_pending is set, we want to tell the Host so it can
 	 * deliver any outstanding interrupts.  Fortunately, both values will
 	 * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
 	 * instruction will AND them together for us.  If both are set, we
-	 * jump to send_interrupts. */
+	 * jump to send_interrupts.
+	 */
 	testl lguest_data+LGUEST_DATA_irq_pending, %eax
 	jnz send_interrupts
 	/* Again, the normal path has used no extra registers.  Clever, huh? */
@@ -109,22 +130,24 @@ ENTRY(lg_restore_fl)
 .global lguest_noirq_start
 .global lguest_noirq_end
 
-/*M:004 When the Host reflects a trap or injects an interrupt into the Guest,
- * it sets the eflags interrupt bit on the stack based on
- * lguest_data.irq_enabled, so the Guest iret logic does the right thing when
- * restoring it.  However, when the Host sets the Guest up for direct traps,
- * such as system calls, the processor is the one to push eflags onto the
- * stack, and the interrupt bit will be 1 (in reality, interrupts are always
- * enabled in the Guest).
+/*M:004
+ * When the Host reflects a trap or injects an interrupt into the Guest, it
+ * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled,
+ * so the Guest iret logic does the right thing when restoring it.  However,
+ * when the Host sets the Guest up for direct traps, such as system calls, the
+ * processor is the one to push eflags onto the stack, and the interrupt bit
+ * will be 1 (in reality, interrupts are always enabled in the Guest).
  *
  * This turns out to be harmless: the only trap which should happen under Linux
  * with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc
  * regions), which has to be reflected through the Host anyway.  If another
  * trap *does* go off when interrupts are disabled, the Guest will panic, and
- * we'll never get to this iret! :*/
+ * we'll never get to this iret!
+:*/
 
-/*G:045 There is one final paravirt_op that the Guest implements, and glancing
- * at it you can see why I left it to last.  It's *cool*!  It's in *assembler*!
+/*G:045
+ * There is one final paravirt_op that the Guest implements, and glancing at it
+ * you can see why I left it to last.  It's *cool*!  It's in *assembler*!
  *
  * The "iret" instruction is used to return from an interrupt or trap.  The
  * stack looks like this:
@@ -148,15 +171,18 @@ ENTRY(lg_restore_fl)
  * return to userspace or wherever.  Our solution to this is to surround the
  * code with lguest_noirq_start: and lguest_noirq_end: labels.  We tell the
  * Host that it is *never* to interrupt us there, even if interrupts seem to be
- * enabled. */
+ * enabled.
+ */
 ENTRY(lguest_iret)
 	pushl	%eax
 	movl	12(%esp), %eax
 lguest_noirq_start:
-	/* Note the %ss: segment prefix here.  Normal data accesses use the
+	/*
+	 * Note the %ss: segment prefix here.  Normal data accesses use the
 	 * "ds" segment, but that will have already been restored for whatever
 	 * we're returning to (such as userspace): we can't trust it.  The %ss:
-	 * prefix makes sure we use the stack segment, which is still valid. */
+	 * prefix makes sure we use the stack segment, which is still valid.
+	 */
 	movl	%eax,%ss:lguest_data+LGUEST_DATA_irq_enabled
 	popl	%eax
 	iret
-- 
cgit v1.2.3


From a91d74a3c4de8115295ee87350c13a329164aaaf Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 30 Jul 2009 16:03:45 -0600
Subject: lguest: update commentry

Every so often, after code shuffles, I need to go through and unbitrot
the Lguest Journey (see drivers/lguest/README).  Since we now use RCU in
a simple form in one place I took the opportunity to expand that explanation.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
---
 arch/x86/include/asm/lguest_hcall.h |  8 +--
 arch/x86/lguest/boot.c              | 99 ++++++++++++++++++++++++++++---------
 arch/x86/lguest/i386_head.S         |  2 +
 3 files changed, 83 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index cceb73e12e5..ba0eed8aa1a 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -35,10 +35,10 @@
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism. Seventeen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
- * If a return value makes sense, it's returned in %eax.
+ * We use the KVM hypercall mechanism, though completely different hypercall
+ * numbers. Seventeen hypercalls are available: the hypercall number is put in
+ * the %eax register, and the arguments (when required) are placed in %ebx,
+ * %ecx, %edx and %esi.  If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 025c04d18f2..d677fa9ca65 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -154,6 +154,7 @@ static void lazy_hcall1(unsigned long call,
 		async_hcall(call, arg1, 0, 0, 0);
 }
 
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
 static void lazy_hcall2(unsigned long call,
 		       unsigned long arg1,
 		       unsigned long arg2)
@@ -189,8 +190,10 @@ static void lazy_hcall4(unsigned long call,
 }
 #endif
 
-/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue the do-nothing hypercall to flush any stored calls. */
+/*G:036
+ * When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue the do-nothing hypercall to flush any stored calls.
+:*/
 static void lguest_leave_lazy_mmu_mode(void)
 {
 	kvm_hypercall0(LHCALL_FLUSH_ASYNC);
@@ -250,13 +253,11 @@ extern void lg_irq_enable(void);
 extern void lg_restore_fl(unsigned long flags);
 
 /*M:003
- * Note that we don't check for outstanding interrupts when we re-enable them
- * (or when we unmask an interrupt).  This seems to work for the moment, since
- * interrupts are rare and we'll just get the interrupt on the next timer tick,
- * but now we can run with CONFIG_NO_HZ, we should revisit this.  One way would
- * be to put the "irq_enabled" field in a page by itself, and have the Host
- * write-protect it when an interrupt comes in when irqs are disabled.  There
- * will then be a page fault as soon as interrupts are re-enabled.
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch.  One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled.  There will then be a page fault as soon as
+ * interrupts are re-enabled.
  *
  * A better method is to implement soft interrupt disable generally for x86:
  * instead of disabling interrupts, we set a flag.  If an interrupt does come
@@ -568,7 +569,7 @@ static void lguest_write_cr4(unsigned long val)
  * cr3 ---> +---------+
  *	    |  	   --------->+---------+
  *	    |	      |	     | PADDR1  |
- *	  Top-level   |	     | PADDR2  |
+ *	  Mid-level   |	     | PADDR2  |
  *	  (PMD) page  |	     | 	       |
  *	    |	      |	   Lower-level |
  *	    |	      |	   (PTE) page  |
@@ -588,23 +589,62 @@ static void lguest_write_cr4(unsigned long val)
  *    Index into top     Index into second      Offset within page
  *  page directory page    pagetable page
  *
- * The kernel spends a lot of time changing both the top-level page directory
- * and lower-level pagetable pages.  The Guest doesn't know physical addresses,
- * so while it maintains these page tables exactly like normal, it also needs
- * to keep the Host informed whenever it makes a change: the Host will create
- * the real page tables based on the Guests'.
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper  ]
+ *	   [   Level  ]
+ *	   [  Entries ]
+ *	   [(PUD Page)]---> +---------+
+ *	 		    |  	   --------->+---------+
+ *	 		    |	      |	     | PADDR1  |
+ *	 		  Mid-level   |	     | PADDR2  |
+ *	 		  (PMD) page  |	     | 	       |
+ *	 		    |	      |	   Lower-level |
+ *	 		    |	      |	   (PTE) page  |
+ *	 		    |	      |	     |	       |
+ *	 		      ....    	     	 ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ *         1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ *      |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into    Index into mid    Index into lower    Offset within page
+ * top entries   directory page     pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set.  Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages.  The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
  */
 
 /*
- * The Guest calls this to set a second-level entry (pte), ie. to map a page
- * into a process' address space.  We set the entry then tell the Host the
- * toplevel and address this corresponds to.  The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd).
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space.  Wetell the Host the toplevel and
+ * address this corresponds to.  The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
  */
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 			       pte_t *ptep)
 {
 #ifdef CONFIG_X86_PAE
+	/* PAE needs to hand a 64 bit page table entry, so it uses two args. */
 	lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
 		    ptep->pte_low, ptep->pte_high);
 #else
@@ -612,6 +652,7 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 #endif
 }
 
+/* This is the "set and update" combo-meal-deal version. */
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
@@ -672,6 +713,11 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 }
 
 #ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry.  These
+ * versions ensure we update all 64 bits at once.
+ */
 static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
 	native_set_pte_atomic(ptep, pte);
@@ -679,13 +725,14 @@ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
 		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
 
-void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
 {
 	native_pte_clear(mm, addr, ptep);
 	lguest_pte_update(mm, addr, ptep);
 }
 
-void lguest_pmd_clear(pmd_t *pmdp)
+static void lguest_pmd_clear(pmd_t *pmdp)
 {
 	lguest_set_pmd(pmdp, __pmd(0));
 }
@@ -784,6 +831,14 @@ static void __init lguest_init_IRQ(void)
 	irq_ctx_init(smp_processor_id());
 }
 
+/*
+ * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so
+ * rather than set them in lguest_init_IRQ we are called here every time an
+ * lguest device needs an interrupt.
+ *
+ * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should
+ * pass that up!
+ */
 void lguest_setup_irq(unsigned int irq)
 {
 	irq_to_desc_alloc_node(irq, 0);
@@ -1298,7 +1353,7 @@ __init void lguest_init(void)
 	 */
 	switch_to_new_gdt(0);
 
-	/* As described in head_32.S, we map the first 128M of memory. */
+	/* We actually boot with all memory mapped, but let's say 128MB. */
 	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
 
 	/*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index db6aa95eb05..27eac0faee4 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -102,6 +102,7 @@ send_interrupts:
 	 * create one manually here.
 	 */
 	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+	/* Put eax back the way we found it. */
 	popl %eax
 	ret
 
@@ -125,6 +126,7 @@ ENTRY(lg_restore_fl)
 	jnz send_interrupts
 	/* Again, the normal path has used no extra registers.  Clever, huh? */
 	ret
+/*:*/
 
 /* These demark the EIP range where host should never deliver interrupts. */
 .global lguest_noirq_start
-- 
cgit v1.2.3


From 3ef7143d2287b21e09e00a25a8cb4fbdcf0c6c4c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Wed, 29 Jul 2009 19:31:30 +0100
Subject: ARM: 5627/1: Fix restoring of lr at the end of mcount
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

After ftrace_trace_function is called r1 is probably clobbered so don't
try to use its value for restoring.

This was introduced in v2.6.29~38^2~7

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/entry-common.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..8c3de1a350b 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -148,7 +148,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
-	mov lr, r1				@ restore lr
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
-- 
cgit v1.2.3


From 320145fac91955ee35a6af7e1c2b42388a17b3d8 Mon Sep 17 00:00:00 2001
From: Yegor Yefremov <yegorslists@googlemail.com>
Date: Thu, 9 Jul 2009 08:48:03 +0100
Subject: ARM: 5597/1: [PCI] reset all internal hardware prior PCI
 initialization

Make software reset to avoid freeze if PCI bus was messed up

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ks8695/pci.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index f5ebcc0fcab..78499667eb7 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs
 
 static void __init ks8695_pci_preinit(void)
 {
+	/* make software reset to avoid freeze if PCI bus was messed up */
+	__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
+
 	/* stage 1 initialization, subid, subdevice = 0x0001 */
 	__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
 
-- 
cgit v1.2.3


From ef12379f205bed7e92434e12ddd44e62d13bebe1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 29 Jul 2009 22:41:06 +0100
Subject: ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driver

The EP93xx features two PWMs (one on the EP9307) with the following
features:

  * Configurable dual output
  * Separate input clocks for each PWM output
  * 16-bit resolution
  * Programmable pulse width (duty cycle), interval (frequency), and
    polarity

This adds the necessary core support as well as the driver.  A sysfs
interface is provided to control the PWM outputs.

Signed-off-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                    |  4 ++
 arch/arm/mach-ep93xx/core.c                     | 85 +++++++++++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  1 +
 arch/arm/mach-ep93xx/include/mach/platform.h    |  4 ++
 4 files changed, 94 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b6b53447b1b..3dd0e2a2309 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,6 +72,9 @@ static struct clk clk_keypad = {
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_pwm = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -137,6 +140,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
 	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 2b58df0184c..40755298fa3 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -597,6 +597,91 @@ static struct platform_device ep93xx_leds = {
 };
 
 
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
+	.resource	= ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE + 0x20,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
+	.resource	= ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+	if (pwm0)
+		platform_device_register(&ep93xx_pwm0_device);
+
+	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+	if (pwm1)
+		platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+
+	if (pdev->id == 0) {
+		err = 0;
+	} else if (pdev->id == 1) {
+		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+				   dev_name(&pdev->dev));
+		if (err)
+			return err;
+		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+		if (err)
+			goto fail;
+
+		/* PWM 1 output on EGPIO[14] */
+		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	} else {
+		err = -ENODEV;
+	}
+
+	return err;
+
+fail:
+	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+	if (pdev->id == 1) {
+		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+		/* EGPIO[14] used for GPIO */
+		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	}
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index a11ae779baa..ea78e908fc8 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,6 +147,7 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
+#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 0af0a3ba704..5f5fa6574d3 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
 #ifndef __ASSEMBLY__
 
 struct i2c_board_info;
+struct platform_device;
 
 struct ep93xx_eth_data
 {
@@ -32,6 +33,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
-- 
cgit v1.2.3


From 41a353d126ca332c20cfd97683b6261992743840 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:20:03 +0100
Subject: ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20

CPU9260 and CPU9G20 share the same PCB populated with either
Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash,
up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpu9260_defconfig  | 1338 +++++++++++++++++++++++++++++++++++
 arch/arm/configs/cpu9g20_defconfig  | 1328 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig          |   14 +
 arch/arm/mach-at91/Makefile         |    2 +
 arch/arm/mach-at91/board-cpu9krea.c |  385 ++++++++++
 5 files changed, 3067 insertions(+)
 create mode 100644 arch/arm/configs/cpu9260_defconfig
 create mode 100644 arch/arm/configs/cpu9g20_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpu9krea.c

(limited to 'arch')

diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
new file mode 100644
index 00000000000..601e7f3d5e9
--- /dev/null
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -0,0 +1,1338 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:57:55 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+CONFIG_MACH_CPU9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
new file mode 100644
index 00000000000..b5b9cbbc697
--- /dev/null
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -0,0 +1,1328 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 15:03:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_CPU9G20=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8f3e15abdb6..83a89720ada 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -217,6 +217,13 @@ config MACH_QIL_A9260
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
+config MACH_CPU9260
+	bool "Eukrea CPU9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9260 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
@@ -303,6 +310,13 @@ config MACH_AT91SAM9G20EK
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
 
+config MACH_CPU9G20
+	bool "Eukrea CPU9G20 board"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9G20 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 4eaf80abe10..b2ea2e5a881 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
+obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -57,6 +58,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
new file mode 100644
index 00000000000..4bc2e9f6ebb
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -0,0 +1,385 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpu9krea.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260_matrix.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cpu9krea_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART3 on ttyS4. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+	/* USART4 on ttyS5. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpu9krea_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cpu9krea_udc_data = {
+	.vbus_pin	= AT91_PIN_PC8,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cpu9krea_macb_data = {
+	.is_rmii	= 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata cpu9krea_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.bus_width_16	= 0,
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+#endif
+
+static void __init cpu9krea_add_device_nand(void)
+{
+	sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+	at91_add_device_nand(&cpu9krea_nand_data);
+}
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data cpuat9260_nor_data = {
+	.width		= 2,
+};
+
+#define NOR_BASE	AT91_CHIPSELECT_0
+#define NOR_SIZE	SZ_64M
+
+static struct resource nor_flash_resources[] = {
+	{
+		.start	= NOR_BASE,
+		.end	= NOR_BASE + NOR_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cpu9krea_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &cpuat9260_nor_data,
+	},
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 10,
+	.nrd_pulse		= 10,
+	.ncs_write_pulse	= 6,
+	.nwe_pulse		= 6,
+
+	.read_cycle		= 12,
+	.write_cycle		= 8,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 13,
+	.nrd_pulse		= 13,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 8,
+
+	.read_cycle		= 15,
+	.write_cycle		= 10,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#endif
+
+static __init void cpu9krea_add_device_nor(void)
+{
+	unsigned long csa;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+
+	/* configure chip-select 0 (NOR) */
+	sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+
+	platform_device_register(&cpu9krea_nor_flash);
+}
+
+/*
+ * LEDs
+ */
+static struct gpio_led cpu9krea_leds[] = {
+	{	/* LED1 */
+		.name			= "LED1",
+		.gpio			= AT91_PIN_PC11,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	},
+	{	/* LED2 */
+		.name			= "LED2",
+		.gpio			= AT91_PIN_PC12,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* LED3 */
+		.name			= "LED3",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* LED4 */
+		.name			= "LED4",
+		.gpio			= AT91_PIN_PC9,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
+static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0x68),
+		.type	= "ds1339",
+	},
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button cpu9krea_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PC3,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB20,
+		.code		= BTN_1,
+		.desc		= "BP2",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data cpu9krea_button_data = {
+	.buttons	= cpu9krea_buttons,
+	.nbuttons	= ARRAY_SIZE(cpu9krea_buttons),
+};
+
+static struct platform_device cpu9krea_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &cpu9krea_button_data,
+	}
+};
+
+static void __init cpu9krea_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PC3, 1);	/* BP1 */
+	at91_set_deglitch(AT91_PIN_PC3, 1);
+	at91_set_gpio_input(AT91_PIN_PB20, 1);	/* BP2 */
+	at91_set_deglitch(AT91_PIN_PB20, 1);
+
+	platform_device_register(&cpu9krea_button_device);
+}
+#else
+static void __init cpu9krea_add_device_buttons(void)
+{
+}
+#endif
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PA29,
+};
+
+static void __init cpu9krea_board_init(void)
+{
+	/* NOR */
+	cpu9krea_add_device_nor();
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&cpu9krea_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpu9krea_udc_data);
+	/* NAND */
+	cpu9krea_add_device_nand();
+	/* Ethernet */
+	at91_add_device_eth(&cpu9krea_macb_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(cpu9krea_i2c_devices,
+		ARRAY_SIZE(cpu9krea_i2c_devices));
+	/* LEDs */
+	at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
+	/* Push Buttons */
+	cpu9krea_add_device_buttons();
+}
+
+#ifdef CONFIG_MACH_CPU9260
+MACHINE_START(CPUAT9260, "Eukrea CPU9260")
+#else
+MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
+#endif
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= cpu9krea_map_io,
+	.init_irq	= cpu9krea_init_irq,
+	.init_machine	= cpu9krea_board_init,
+MACHINE_END
-- 
cgit v1.2.3


From 10233a939812450e4fe07cf529585bab5b4d99ec Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:23:42 +0100
Subject: ARM: 5630/1: Add support for Eukrea's CPUAT91

CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash,
up to 128MB SDRAM and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <ebenard@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpuat91_defconfig | 1316 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig         |    7 +
 arch/arm/mach-at91/Makefile        |    1 +
 arch/arm/mach-at91/board-cpuat91.c |  185 +++++
 4 files changed, 1509 insertions(+)
 create mode 100644 arch/arm/configs/cpuat91_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpuat91.c

(limited to 'arch')

diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
new file mode 100644
index 00000000000..4901827253f
--- /dev/null
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:45:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+CONFIG_MACH_CPUAT91=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 83a89720ada..a24d824c428 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -156,6 +156,13 @@ config MACH_YL9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
+config MACH_CPUAT91
+	bool "Eukrea CPUAT91"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using the Eukrea Electromatique's
+	  CPUAT91 board <http://www.eukrea.com/>.
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b2ea2e5a881..a6ed015d82e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
+obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
new file mode 100644
index 00000000000..a28d9965619
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpuat91.c
+ *
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+static struct gpio_led cpuat91_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= AT91_PIN_PC0,
+	},
+};
+
+static void __init cpuat91_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART2 on ttyS3 (Rx, Tx) */
+	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpuat91_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata cpuat91_eth_data = {
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata cpuat91_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata cpuat91_udc_data = {
+	.vbus_pin	= AT91_PIN_PC15,
+	.pullup_pin	= AT91_PIN_PC14,
+};
+
+static struct at91_mmc_data __initdata cpuat91_mmc_data = {
+	.det_pin	= AT91_PIN_PC2,
+	.wire4		= 1,
+};
+
+static struct physmap_flash_data cpuat91_flash_data = {
+	.width		= 2,
+};
+
+static struct resource cpuat91_flash_resource = {
+	.start		= AT91_CHIPSELECT_0,
+	.end		= AT91_CHIPSELECT_0 + SZ_16M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cpuat91_norflash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &cpuat91_flash_data,
+	},
+	.resource	= &cpuat91_flash_resource,
+	.num_resources	= 1,
+};
+
+#ifdef CONFIG_MTD_PLATRAM
+struct platdata_mtd_ram at91_sram_pdata = {
+	.mapname	= "SRAM",
+	.bankwidth	= 2,
+};
+
+static struct resource at91_sram_resource[] = {
+	[0] = {
+		.start = AT91RM9200_SRAM_BASE,
+		.end   = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device at91_sram = {
+	.name		= "mtd-ram",
+	.id		= 0,
+	.resource	= at91_sram_resource,
+	.num_resources	= ARRAY_SIZE(at91_sram_resource),
+	.dev	= {
+		.platform_data = &at91_sram_pdata,
+	},
+};
+#endif /* MTD_PLATRAM */
+
+static struct platform_device *platform_devices[] __initdata = {
+	&cpuat91_norflash,
+#ifdef CONFIG_MTD_PLATRAM
+	&at91_sram,
+#endif /* CONFIG_MTD_PLATRAM */
+};
+
+static void __init cpuat91_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* LEDs. */
+	at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
+	/* Ethernet */
+	at91_add_device_eth(&cpuat91_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&cpuat91_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpuat91_udc_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* Platform devices */
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+MACHINE_START(CPUAT91, "Eukrea")
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= cpuat91_map_io,
+	.init_irq	= cpuat91_init_irq,
+	.init_machine	= cpuat91_board_init,
+MACHINE_END
-- 
cgit v1.2.3


From b0e66522f4d86713b0450255210e26c4f11ee86b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:20 +0100
Subject: ARM: S3C24XX: Add BWSCON per-bank information.

Add definitions and an accessor macro to deal with
reading bus information from S3C2410_BWSCON for any
given numbered bank.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-mem.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 57759804e2f..7f7c5294796 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
 #define S3C2410_BWSCON_WS7		(1<<30)
 #define S3C2410_BWSCON_ST7		(1<<31)
 
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8		(0)
+#define S3C2410_BWSCON_DW16		(1)
+#define S3C2410_BWSCON_DW32		(2)
+#define S3C2410_BWSCON_WS		(1 << 2)
+#define S3C2410_BWSCON_ST		(1 << 3)
+
 /* memory set (rom, ram) */
 #define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
 #define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-- 
cgit v1.2.3


From 2e4ea6e8209e0c1d93c69c34c32002337b3f747e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:21 +0100
Subject: ARM: S3C24XX: CPUFREQ: Add core support.

Add the core of the support for enabling the CPUFreq driver on
all S3C24XX based systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Makefile                     |   2 +
 arch/arm/plat-s3c24xx/cpu-freq.c                   | 704 +++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 183 ++++++
 3 files changed, 889 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..1f6add552bd 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,6 +20,8 @@ obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+
 # Architecture dependant builds
 
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 00000000000..40ff7e2569d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,704 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long fclk, pclk, hclk, armclk;
+
+	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+	cfg->pll.frequency = fclk;
+
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+	cfg->divs.h_divisor = fclk / hclk;
+	cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long pll = cfg->pll.frequency;
+
+	cfg->freq.fclk = pll;
+	cfg->freq.hclk = pll / cfg->divs.h_divisor;
+	cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+	/* convert hclk into 10ths of nanoseconds for io calcs */
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+	int diff_cur = abs(target - c);
+	int diff_new = abs(target - n);
+
+	return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+				 struct s3c_cpufreq_config *cfg)
+{
+	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->divs.h_divisor,
+		     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->set_iotiming)
+		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->calc_iotiming)
+		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+	return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+	cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+					 unsigned int freq)
+{
+	clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 struct cpufreq_frequency_table *pll)
+{
+	struct s3c_cpufreq_freqs freqs;
+	struct s3c_cpufreq_config cpu_new;
+	unsigned long flags;
+
+	cpu_new = cpu_cur;  /* copy new from current */
+
+	s3c_cpufreq_show("cur", &cpu_cur);
+
+	/* TODO - check for DMA currently outstanding */
+
+	cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+	if (pll)
+		freqs.pll_changing = 1;
+
+	/* update our frequencies */
+
+	cpu_new.freq.armclk = target_freq;
+	cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+		printk(KERN_ERR "no divisors for %d\n", target_freq);
+		goto err_notpossible;
+	}
+
+	s3c_freq_dbg("%s: got divs\n", __func__);
+
+	s3c_cpufreq_calc(&cpu_new);
+
+	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+			printk(KERN_ERR "%s: no IO timings\n", __func__);
+			goto err_notpossible;
+		}
+	}
+
+	s3c_cpufreq_show("new", &cpu_new);
+
+	/* setup our cpufreq parameters */
+
+	freqs.old = cpu_cur.freq;
+	freqs.new = cpu_new.freq;
+
+	freqs.freqs.cpu = 0;
+	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+	freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+	/* update f/h/p clock settings before we issue the change
+	 * notification, so that drivers do not need to do anything
+	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+	/* start the frequency change */
+
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+	/* If hclk is staying the same, then we do not need to
+	 * re-write the IO or the refresh timings whilst we are changing
+	 * speed. */
+
+	local_irq_save(flags);
+
+	/* is our memory clock slowing down? */
+	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+		/* not changing PLL, just set the divisors */
+
+		s3c_cpufreq_setdivs(&cpu_new);
+	} else {
+		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+			/* slow the cpu down, then set divisors */
+
+			s3c_cpufreq_setfvco(&cpu_new);
+			s3c_cpufreq_setdivs(&cpu_new);
+		} else {
+			/* set the divisors, then speed up */
+
+			s3c_cpufreq_setdivs(&cpu_new);
+			s3c_cpufreq_setfvco(&cpu_new);
+		}
+	}
+
+	/* did our memory clock speed up */
+	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	/* update our current settings */
+	cpu_cur = cpu_new;
+
+	local_irq_restore(flags);
+
+	/* notify everyone we've done this */
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+	s3c_freq_dbg("%s: finished\n", __func__);
+	return 0;
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_frequency_table *pll;
+	unsigned int index;
+
+	/* avoid repeated calls which cause a needless amout of duplicated
+	 * logging output (and CPU time as the calculation process is
+	 * done) */
+	if (target_freq == last_target)
+		return 0;
+
+	last_target = target_freq;
+
+	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+		     __func__, policy, target_freq, relation);
+
+	if (ftab) {
+		if (cpufreq_frequency_table_target(policy, ftab,
+						   target_freq, relation,
+						   &index)) {
+			s3c_freq_dbg("%s: table failed\n", __func__);
+			return -EINVAL;
+		}
+
+		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+			     target_freq, index, ftab[index].frequency);
+		target_freq = ftab[index].frequency;
+	}
+
+	target_freq *= 1000;  /* convert target to Hz */
+
+	/* find the settings for our new frequency */
+
+	if (!pll_reg || cpu_cur.lock_pll) {
+		/* either we've not got any PLL values, or we've locked
+		 * to the current one. */
+		pll = NULL;
+	} else {
+		struct cpufreq_policy tmp_policy;
+		int ret;
+
+		/* we keep the cpu pll table in Hz, to ensure we get an
+		 * accurate value for the PLL output. */
+
+		tmp_policy.min = policy->min * 1000;
+		tmp_policy.max = policy->max * 1000;
+		tmp_policy.cpu = policy->cpu;
+
+		/* cpufreq_frequency_table_target uses a pointer to 'index'
+		 * which is the number of the table entry, not the value of
+		 * the table entry's index field. */
+
+		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+						     target_freq, relation,
+						     &index);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: no PLL available\n", __func__);
+			goto err_notpossible;
+		}
+
+		pll = pll_reg + index;
+
+		s3c_freq_dbg("%s: target %u => %u\n",
+			     __func__, target_freq, pll->frequency);
+
+		target_freq = pll->frequency;
+	}
+
+	return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk))
+		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+	return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->cur = s3c_cpufreq_get(0);
+	policy->min = policy->cpuinfo.min_freq = 0;
+	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* feed the latency information from the cpu driver */
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+	return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+	       clk_get_rate(clk_fclk) / 1000,
+	       clk_get_rate(clk_hclk) / 1000,
+	       clk_get_rate(clk_pclk) / 1000,
+	       clk_get_rate(clk_arm) / 1000);
+
+	return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+	suspend_pll.frequency = clk_get_rate(_clk_mpll);
+	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+	suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+	return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+	last_target = ~0;	/* invalidate last_target setting */
+
+	/* first, find out what speed we resumed at. */
+	s3c_cpufreq_resume_clocks();
+
+	/* whilst we will be called later on, we try and re-set the
+	 * cpu frequencies as soon as possible so that we do not end
+	 * up resuming devices and then immediatley having to re-set
+	 * a number of settings once these devices have restarted.
+	 *
+	 * as a note, it is expected devices are not used until they
+	 * have been un-suspended and at that time they should have
+	 * used the updated clock settings.
+	 */
+
+	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s3c_cpufreq_verify,
+	.target		= s3c_cpufreq_target,
+	.get		= s3c_cpufreq_get,
+	.init		= s3c_cpufreq_init,
+	.suspend	= s3c_cpufreq_suspend,
+	.resume		= s3c_cpufreq_resume,
+	.name		= "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+	if (!info || !info->name) {
+		printk(KERN_ERR "%s: failed to pass valid information\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+	       info->name);
+
+	/* check our driver info has valid data */
+
+	BUG_ON(info->set_refresh == NULL);
+	BUG_ON(info->set_divs == NULL);
+	BUG_ON(info->calc_divs == NULL);
+
+	/* info->set_fvco is optional, depending on whether there
+	 * is a need to set the clock code. */
+
+	cpu_cur.info = info;
+
+	/* Note, driver registering should probably update locktime */
+
+	return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	struct s3c_cpufreq_board *ours;
+
+	if (!board) {
+		printk(KERN_INFO "%s: no board data\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Copy the board information so that each board can make this
+	 * initdata. */
+
+	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+	if (ours == NULL) {
+		printk(KERN_ERR "%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	*ours = *board;
+	cpu_cur.board = ours;
+
+	return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+	int ret;
+
+	if (!cpu_cur.info->get_iotiming) {
+		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+	if (ret)
+		printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+	return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+				 struct s3c_freq *a, struct s3c_freq *b)
+{
+	dst->fclk = do_min(a->fclk, b->fclk);
+	dst->hclk = do_min(a->hclk, b->hclk);
+	dst->pclk = do_min(a->pclk, b->pclk);
+	dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+	u32 result;
+
+	result = freq * time_us;
+	result = DIV_ROUND_UP(result, 1000 * 1000);
+
+	return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+	unsigned int bits = cpu_cur.info->locktime_bits;
+	u32 rate = (u32)clk_get_rate(_clk_xtal);
+	u32 val;
+
+	if (bits == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+	__raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+	int size, ret;
+
+	if (!cpu_cur.info->calc_freqtable)
+		return -EINVAL;
+
+	kfree(ftab);
+	ftab = NULL;
+
+	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+	size++;
+
+	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+	if (!ftab) {
+		printk(KERN_ERR "%s: no memory for tables\n", __func__);
+		return -ENOMEM;
+	}
+
+	ftab_size = size;
+
+	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+	int ret = 0;
+
+	if (cpu_cur.info && cpu_cur.board) {
+		ret = s3c_cpufreq_initclks();
+		if (ret)
+			goto out;
+
+		/* get current settings */
+		s3c_cpufreq_getcur(&cpu_cur);
+		s3c_cpufreq_show("cur", &cpu_cur);
+
+		if (cpu_cur.board->auto_io) {
+			ret = s3c_cpufreq_auto_io();
+			if (ret) {
+				printk(KERN_ERR "%s: failed to get io timing\n",
+				       __func__);
+				goto out;
+			}
+		}
+
+		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+			printk(KERN_ERR "%s: no IO support registered\n",
+			       __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!cpu_cur.info->need_pll)
+			cpu_cur.lock_pll = 1;
+
+		s3c_cpufreq_update_loctkime();
+
+		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+				     &cpu_cur.info->max);
+
+		if (cpu_cur.info->calc_freqtable)
+			s3c_cpufreq_build_freq();
+
+		ret = cpufreq_register_driver(&s3c24xx_driver);
+	}
+
+ out:
+	return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no)
+{
+	struct cpufreq_frequency_table *vals;
+	unsigned int size;
+
+	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+	vals = kmalloc(size, GFP_KERNEL);
+	if (vals) {
+		memcpy(vals, plls, size);
+		pll_reg = vals;
+
+		/* write a terminating entry, we don't store it in the
+		 * table that is stored in the kernel */
+		vals += plls_no;
+		vals->frequency = CPUFREQ_TABLE_END;
+
+		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+	} else
+		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+	return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 00000000000..e078821b360
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,183 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO	(8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+	unsigned long	bankcon;
+	unsigned int	tacp;
+	unsigned int	tacs;
+	unsigned int	tcos;
+	unsigned int	tacc;
+	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcah;		/* Address hold after nCS */
+	unsigned char	nwait_en;	/* nWait enabled for bank. */
+};
+
+union s3c_iobank {
+	  struct s3c2410_iobank_timing	*io_2410;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+	union s3c_iobank	bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+	struct s3c_pllval	*vals;
+	int			 size;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ *	any frequency changes. This is really only need by devices like the
+ *	S3C2410 where there is no or limited divider between the PLL and the
+ *	ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *	from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *	from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *	current frequency configuration. If the table passed in is NULL,
+ *	then the return is the number of elements to be filled for allocation
+ *	of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+	const char		*name;
+	struct s3c_freq		max;
+
+	unsigned int		latency;
+
+	unsigned int		locktime_m;
+	unsigned int		locktime_u;
+	unsigned char		locktime_bits;
+
+	unsigned int		need_pll:1;
+
+	/* driver routines */
+
+	void		(*resume_clocks)(void);
+
+	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+					 struct s3c_iotimings *timings);
+
+	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+					  struct cpufreq_frequency_table *t,
+					  size_t table_size);
+
+	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
+	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
+	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
+	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+				      int index, size_t table_size,
+				      unsigned int freq)
+{
+	if (index < 0)
+		return index;
+
+	if (table) {
+		if (index >= table_size)
+			return -ENOMEM;
+
+		s3c_freq_dbg("%s: { %d = %u kHz }\n",
+			     __func__, index, freq);
+
+		table[index].index = index;
+		table[index].frequency = freq;
+	}
+
+	return index + 1;
+}
-- 
cgit v1.2.3


From ea5fe9aedf512d20b75b7dcfd54ab99ae5c0934b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:22 +0100
Subject: ARM: S3C: CPUFREQ: Documentation for cpufreq header

Update arch/arm/plat-s3c/include/plat/cpu-freq.h to include kerneldoc
style documentation.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h | 91 +++++++++++++++++++++++++++----
 1 file changed, 81 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a13307e9..0ba7670fd07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
 struct s3c_cpufreq_board;
 struct s3c_iotimings;
 
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
 struct s3c_freq {
 	unsigned long	fclk;
 	unsigned long	armclk;
@@ -25,33 +40,75 @@ struct s3c_freq {
 	unsigned long	pclk;
 };
 
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
  * notification can use this information that is not provided by just
  * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
  */
-
 struct s3c_cpufreq_freqs {
 	struct cpufreq_freqs	freqs;
 	struct s3c_freq		old;
 	struct s3c_freq		new;
+
+	unsigned int		pll_changing:1;
 };
 
 #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
 
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
 struct s3c_clkdivs {
-	int		p_divisor;	/* fclk / pclk */
-	int		h_divisor;	/* fclk / hclk */
-	int		arm_divisor;	/* not all cpus have this. */
-	unsigned char	dvs;		/* using dvs mode to arm. */
+	int		p_divisor;
+	int		h_divisor;
+	int		arm_divisor;
+	unsigned char	dvs;
 };
 
 #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
 
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
 struct s3c_pllval {
 	unsigned long		freq;
 	unsigned long		pll_reg;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_pllval	pll;
@@ -60,13 +117,27 @@ struct s3c_cpufreq_config {
 	struct s3c_cpufreq_board *board;
 };
 
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *	initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *	lines that will require the hardware timing registers to be
+ *	updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *	is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
  *
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
  */
 struct s3c_cpufreq_board {
-	unsigned int	refresh;	/* refresh period in ns */
+	unsigned int	refresh;
 	unsigned int	auto_io:1;	/* automatically init io timings. */
 	unsigned int	need_io:1;	/* set if needs io timing support. */
 
-- 
cgit v1.2.3


From d6fc87d3f7d236892e4d0003a07cd2b5171e5e27 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:23 +0100
Subject: ARM: S3C: CPUFREQ: Move struct s3c_cpufreq_config to cpu-freq-core.h

Move the structure s3c_cpufreq_config from cpu-freq.h to the
less advertised cpu-freq-core.h as it is not needed by anything
outside the core drivers.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h          | 20 -----------------
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 25 ++++++++++++++++++++++
 2 files changed, 25 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 0ba7670fd07..7b982b7f28c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -97,26 +97,6 @@ struct s3c_pllval {
 	unsigned long		pll_reg;
 };
 
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_pllval	pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-};
-
 /**
  * struct s3c_cpufreq_board - per-board cpu frequency informatin
  * @refresh: The SDRAM refresh period in nanoseconds.
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index e078821b360..7938fb0bc38 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -64,6 +64,31 @@ struct s3c_plltab {
 	int			 size;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_freq		max;
+	struct cpufreq_frequency_table pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+
+	unsigned int	lock_pll:1;
+};
+
 /**
  * struct s3c_cpufreq_info - Information for the CPU frequency driver.
  * @name: The name of this implementation.
-- 
cgit v1.2.3


From 89c52ed4687faca6bf0eabf6d46eaee4a14376b3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:24 +0100
Subject: ARM: Add ARCH_HAS_CPUFREQ for presence of CPUFREQ driver

Add ARCH_HAS_CPUFREQ so that each machine config can select
it if they have CPUFREQ driver support. This means that the
CPUFREQ specific area does not need the if statement updating
each time a new machine is added.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..7dbaabd8df3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -203,6 +210,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -509,6 +517,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -551,6 +560,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -573,6 +583,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
@@ -632,6 +643,7 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -1241,7 +1253,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-- 
cgit v1.2.3


From 9d56c02a5a171e1fdb87f3b718b418cb0522d2b1 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:25 +0100
Subject: ARM: Add S3C24XX to CPUFreq KConfig

Add the S3C24XX to the main ARM CPUFreq Kconfig support list.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7dbaabd8df3..c7a83efef0b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -573,6 +573,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -1288,6 +1289,46 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
 endif
 
 source "drivers/cpuidle/Kconfig"
-- 
cgit v1.2.3


From 831a6fcb9393960b35173fa2e0f835b710152fff Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:26 +0100
Subject: ARM: S3C2410: CPUFREQ: Add io-timing support.

Add io-timing support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig            |   9 +
 arch/arm/plat-s3c24xx/Makefile           |   1 +
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c | 432 +++++++++++++++++++++++++++++++
 3 files changed, 442 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-iotiming.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..d82d30c2f05 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -107,6 +107,15 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 
 # common code for s3c24xx based machines, such as the SMDKs.
 
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 1f6add552bd..6f9afd13ab4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
+obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 00000000000..26fe2129cf2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,432 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+				 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = timings->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+		       print_ns(bt->tacs),
+		       print_ns(bt->tcos),
+		       print_ns(bt->tacc),
+		       print_ns(bt->tcoh),
+		       print_ns(bt->tcah));
+	}
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+	return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+	return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+	if (cyc == 0)
+		return 0;
+
+	return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+			      unsigned long *v, int shift)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+		       __func__, cyc, hclk_tns, shift, div);
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 3:
+	case 4:
+		val = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	*v |= val << shift;
+	return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+	/* Currently no support for Tacp calculations. */
+	return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+		     unsigned long hclk_tns, unsigned long *v)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+		       __func__, cyc, nwait_en, hclk_tns, div);
+
+	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+	if (nwait_en && div < 4)
+		div = 4;
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		val = div - 1;
+		break;
+
+	case 5:
+	case 6:
+		val = 4;
+		break;
+
+	case 7:
+	case 8:
+		val = 5;
+		break;
+
+	case 9:
+	case 10:
+		val = 6;
+		break;
+
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+		val = 7;
+		break;
+
+	default:
+		return -1;
+	}
+
+	*v |= val << 8;
+	return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned long res;
+	int ret;
+
+	res  = bt->bankcon;
+	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+	/* tacp: 2,3,4,5 */
+	/* tcah: 0,1,2,4 */
+	/* tcoh: 0,1,2,4 */
+	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+	/* tcos: 0,1,2,4 */
+	/* tacs: 0,1,2,4 */
+
+	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+	if (ret)
+		return -EINVAL;
+
+	ret |= calc_tacp(bt->tacp, hclk, &res);
+	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+	if (ret)
+		return -EINVAL;
+
+	bt->bankcon = res;
+	return 0;
+}
+
+static unsigned int tacc_tab[] = {
+	[0]	= 1,
+	[1]	= 2,
+	[2]	= 3,
+	[3]	= 4,
+	[4]	= 6,
+	[5]	= 9,
+	[6]	= 10,
+	[7]	= 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 7;
+	return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 3;
+	return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+			      struct s3c2410_iobank_timing *bt)
+{
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+
+	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+		bt = iot->bank[bank].io_2410;
+
+		if (!bt)
+			continue;
+
+		bt->bankcon = bankcon;
+
+		ret = s3c2410_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+
+		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+			       __func__, bank, bt->bankcon);
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		__raw_writel(bt->bankcon, bank_reg(bank));
+	}
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	unsigned long bwscon;
+	int bank;
+
+	bwscon = __raw_readl(S3C2410_BWSCON);
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+
+		if (!bank_is_io(bankcon))
+			continue;
+
+		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+			       __func__, bank, bankcon);
+
+		bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		/* find out in nWait is enabled for bank. */
+
+		if (bank != 0) {
+			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+			if (tmp & S3C2410_BWSCON_WS)
+				bt->nwait_en = 1;
+		}
+
+		timings->bank[bank].io_2410 = bt;
+		bt->bankcon = bankcon;
+
+		s3c2410_iotiming_getbank(cfg, bt);
+	}
+
+	s3c2410_print_timing("get", timings);
+	return 0;
+}
-- 
cgit v1.2.3


From a24c091db988551e2c350cfde9eb80ab6e791ffb Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:27 +0100
Subject: ARM: S3C2410: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig                 |  11 ++
 arch/arm/mach-s3c2410/Makefile                |   1 +
 arch/arm/mach-s3c2410/cpu-freq.c              | 157 ++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/Kconfig                 |   7 ++
 arch/arm/plat-s3c24xx/Makefile                |   1 +
 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c |  64 +++++++++++
 6 files changed, 241 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d5b91..a7f70e18ccb 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -45,6 +46,15 @@ config MACH_BAST_IDE
 	  Internal node for machines with an BAST style IDE
 	  interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +89,7 @@ config MACH_N30
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f82711..cc25eb0eb2c 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 00000000000..f2cbdbab0df
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,157 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0      ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.resume_clocks	= s3c2410_setup_clocks,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+	.add		= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass,
+				      &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+	.add		= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass,
+				      &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index d82d30c2f05..a547c79ed6c 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -116,6 +116,13 @@ config S3C2410_IOTIMING
 	  Internal node to select io timing code that is common to the s3c2410
 	  and s3c2440/s3c2442 cpu frequency support.
 
+config S3C2410_CPUFREQ_UTILS
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 6f9afd13ab4..b28fe9cb0e5 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 00000000000..43ea80190d8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+	unsigned long refval;
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh = (1 << 11) + 1 - refresh;
+
+	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+	refval = __raw_readl(S3C2410_REFRESH);
+	refval &= ~((1 << 12) - 1);
+	refval |= refresh;
+	__raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+	__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
-- 
cgit v1.2.3


From 438a09e1eb01c3f0d4cddde97ed9caae652f910b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:28 +0100
Subject: ARM: S3C2410: CPUFREQ: Add PLL table

Add PLL table for the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig  |  7 ++++
 arch/arm/mach-s3c2410/Makefile |  1 +
 arch/arm/mach-s3c2410/pll.c    | 95 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/pll.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index a7f70e18ccb..d8c023d4df3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -55,6 +55,13 @@ config S3C2410_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2410
 
+config S3C2410_PLLTABLE
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index cc25eb0eb2c..2ab5ba4b266 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 00000000000..f178c2fd9d8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
-- 
cgit v1.2.3


From 342e20f10294aca4097ae2a056c72a202221a75f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:29 +0100
Subject: ARM: S3C2440: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2440 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig           |   8 +
 arch/arm/plat-s3c24xx/Makefile          |   1 +
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c | 309 ++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a547c79ed6c..feb9db8886b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -34,6 +34,14 @@ config CPU_S3C244X
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b28fe9cb0e5..b73f2e17b16 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 00000000000..c177a20319e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,309 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+	long diff = a - b;
+
+	return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv;
+	unsigned long hclk, fclk, armclk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+		     __func__, fclk, armclk, hclk_max);
+
+	if (armclk > fclk) {
+		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+		armclk = fclk;
+	}
+
+	/* if we are in DVS, we need HCLK to be <= ARMCLK */
+	if (armclk < fclk && armclk < hclk_max)
+		hclk_max = armclk;
+
+	for (hdiv = 1; hdiv < 9; hdiv++) {
+		if (hdiv == 5 || hdiv == 7)
+			hdiv++;
+
+		hclk = (fclk / hdiv);
+		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+			break;
+	}
+
+	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+	if (hdiv > 8)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* calculate a valid armclk */
+
+	if (armclk < hclk)
+		armclk = hclk;
+
+	/* if we're running armclk lower than fclk, this really means
+	 * that the system should go into dvs mode, which means that
+	 * armclk is connected to hclk. */
+	if (armclk < fclk) {
+		cfg->divs.dvs = 1;
+		armclk = hclk;
+	} else
+		cfg->divs.dvs = 0;
+
+	cfg->freq.armclk = armclk;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv;
+	cfg->divs.p_divisor = pdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+			   S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv, camdiv;
+
+	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+		     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+	camdiv &= ~CAMDIVN_HCLK_HALF;
+
+	switch (cfg->divs.h_divisor) {
+	case 1:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+		break;
+
+	case 2:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+		break;
+
+	case 6:
+		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+	case 3:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+		break;
+
+	case 8:
+		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+	case 4:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+		break;
+
+	default:
+		BUG();	/* we don't expect to get here. */
+	}
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+	/* todo - set pclk. */
+
+	/* Write the divisors first with hclk intentionally halved so that
+	 * when we write clkdiv we will under-frequency instead of over. We
+	 * then make a short delay and remove the hclk halving if necessary.
+	 */
+
+	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	ndelay(20);
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+			int *divs,
+			struct cpufreq_frequency_table *table,
+			size_t table_size)
+{
+	unsigned long freq;
+	int index = 0;
+	int div;
+
+	for (div = *divs; div > 0; div = *divs++) {
+		freq = fclk / div;
+
+		if (freq > max_hclk && div != 1)
+			continue;
+
+		freq /= 1000; /* table is in kHz */
+		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+		if (index < 0)
+			break;
+	}
+
+	return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+				     struct cpufreq_frequency_table *table,
+				     size_t table_size)
+{
+	int ret;
+
+	WARN_ON(cfg->info == NULL);
+	WARN_ON(cfg->board == NULL);
+
+	ret = run_freq_for(cfg->info->max.hclk,
+			   cfg->info->max.fclk,
+			   hclk_divs,
+			   table, table_size);
+
+	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+	return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+	.max		= {
+		.fclk	= 400000000,
+		.hclk	= 133333333,
+		.pclk	=  66666666,
+	},
+
+	.locktime_m	= 300,
+	.locktime_u	= 300,
+	.locktime_bits	= 16,
+
+	.name		= "s3c244x",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.set_fvco	= s3c2410_set_fvco,
+
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2440_cpufreq_setdivs,
+	.calc_divs	= s3c2440_cpufreq_calcdivs,
+	.calc_freqtable	= s3c2440_cpufreq_calctable,
+
+	.resume_clocks	= s3c244x_setup_clocks,
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+		return -ENOENT;
+	}
+
+	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
-- 
cgit v1.2.3


From 78278d6a9673b487d8229dd430cacdf9964c0d3f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:30 +0100
Subject: ARM: S3C2440: CPUFREQ: Add PLL tables

Add PLL tables for the S3C2440.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig                |  14 +++
 arch/arm/plat-s3c24xx/Makefile               |   3 +
 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c |  97 ++++++++++++++++++++
 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c | 127 +++++++++++++++++++++++++++
 4 files changed, 241 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index feb9db8886b..9c449c048c7 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,6 +42,20 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b73f2e17b16..c60317b3491 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -28,6 +28,9 @@ obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 00000000000..ff9443b233a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 00000000000..7679af13a94
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
-- 
cgit v1.2.3


From 0345b51c6a4bfaf6c066b8055d02116432b6a0c9 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:31 +0100
Subject: ARM: S3C2440: CPUFREQ: Add crystal frequency Kconfig entries.

Add entries to select the crystal to select for each different
supported board. This information is then available for anything
else requiring this, such as the CPUFreq PLL tables.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig |  6 ++++++
 arch/arm/plat-s3c24xx/Kconfig | 16 ++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec3730..3cb12e39e0a 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +54,7 @@ config MACH_OSIRIS
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +62,7 @@ config MACH_RX3715
 config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
 	help
@@ -67,6 +71,7 @@ config ARCH_S3C2440
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +80,7 @@ config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
 	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
 config MACH_AT2440EVB
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c449c048c7..ec9921b6848 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,16 +42,28 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
 config S3C2440_PLL_12000000
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
 
 config S3C2440_PLL_16934400
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-- 
cgit v1.2.3


From baf6b281cfa7259ab2d1148b879850f699520bc6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:32 +0100
Subject: ARM: OSIRIS: CPUFREQ: Add CPU frequency scaling support

Add CPU frequency scalling support to the Simtec Osiris.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig       | 1 +
 arch/arm/mach-s3c2440/mach-osiris.c | 9 +++++++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 3cb12e39e0a..8ae1b288f7f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -46,6 +46,7 @@ config MACH_OSIRIS
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
 	select S3C2440_XTAL_12000000
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b49a6..2105a41281a 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+	.refresh	= 7800, /* refresh period is 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init osiris_map_io(void)
 {
 	unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
 
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_cpufreq_setboard(&osiris_cpufreq);
+
 	i2c_register_board_info(0, osiris_i2c_devs,
 				ARRAY_SIZE(osiris_i2c_devs));
 
-- 
cgit v1.2.3


From 22d4239973bbd3738b3cfe6048c55f885f3f6256 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:33 +0100
Subject: ARM: S3C2412: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2412 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig    |   6 +
 arch/arm/mach-s3c2412/Makefile   |   1 +
 arch/arm/mach-s3c2412/cpu-freq.c | 251 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 258 insertions(+)
 create mode 100644 arch/arm/mach-s3c2412/cpu-freq.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ffd0ae..79e18340e07 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	default y
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
 
 menu "S3C2412 Machines"
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5dc6a..530ec46cbae 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 00000000000..80b20c33447
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,251 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 16,
+
+	.name		= "s3c2412",
+	.set_refresh	= s3c2412_cpufreq_setrefresh,
+	.set_divs	= s3c2412_cpufreq_setdivs,
+	.calc_divs	= s3c2412_cpufreq_calcdivs,
+
+	.resume_clocks	= s3c2412_setup_clocks,
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+	unsigned long fclk_rate;
+
+	hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(hclk)) {
+		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+		return -ENOENT;
+	}
+
+	fclk = clk_get(NULL, "fclk");
+	if (IS_ERR(fclk)) {
+		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+		goto err_fclk;
+	}
+
+	fclk_rate = clk_get_rate(fclk);
+	if (fclk_rate > 200000000) {
+		printk(KERN_INFO
+		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+		       __func__, fclk_rate / 1000000);
+		s3c2412_cpufreq_info.max.fclk = 266000000;
+		s3c2412_cpufreq_info.max.hclk = 133000000;
+		s3c2412_cpufreq_info.max.pclk =  66000000;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+		goto err_armclk;
+	}
+
+	xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal)) {
+		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+		goto err_xtal;
+	}
+
+	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+	clk_put(armclk);
+err_armclk:
+	clk_put(fclk);
+err_fclk:
+	clk_put(hclk);
+
+	return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+	.add		= s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass,
+				      &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
-- 
cgit v1.2.3


From e13cf03eaae3792442c401860910d40f33c89a33 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:35 +0100
Subject: ARM: S3C: Update CPU register mapping practices.

Currently map-base.h defines the main virtual address mappings made
for all the support S3C SoC series, but does not then define any base
for per-cpu mappings to be made from.

Add S3C_ADDR_CPU() macro to define an virtual address as an offset
from the last of the core mappings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h  | 4 ++--
 arch/arm/plat-s3c/include/plat/map-base.h | 8 +++++++-
 2 files changed, 9 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..e02e6c38a39 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -49,7 +49,7 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -57,7 +57,7 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a5..250be311c85 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
 
 #define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
 #define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
 #define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
 #define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
 #define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
 
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
+
 #endif /* __ASM_PLAT_MAP_H */
-- 
cgit v1.2.3


From 25400036867fa7a135fca17810555400d176acaa Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:36 +0100
Subject: ARM: S3C2412: Update memory register mapping and definitions

Update the mapping of the memory controler registers and
add the missing definitions of the register block for the
SSMC.

The register contents definitions can be found in the pl093
header.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h           |  7 +++++++
 .../mach-s3c2410/include/mach/regs-s3c2412-mem.h   | 23 ++++++++++++++++++++--
 arch/arm/mach-s3c2412/s3c2412.c                    | 12 +++++++++++
 3 files changed, 40 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..11cce097550 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC	(0x4F000000)
+#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI	(0x48800000)
+#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
+
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf2712317..fb635251509 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
 #ifndef __ASM_ARM_REGS_S3C2412_MEM
 #define __ASM_ARM_REGS_S3C2412_MEM
 
-#ifndef S3C2412_MEMREG
 #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
 
 #define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
 #define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
 #define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
 #define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
 
+/* EBI control registers */
+
+#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
+
 #endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba69ec3..bef39f77729 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(WATCHDOG),
+	{
+		.virtual = (unsigned long)S3C2412_VA_SSMC,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)S3C2412_VA_EBI,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
 };
 
 /* uart registration process */
-- 
cgit v1.2.3


From 140780ab5a2bc04ccff77337c3a27f3b44182a91 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:37 +0100
Subject: ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing support

Add IO bank timing support for S3C2412/S3C2443.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig                      |   3 +
 arch/arm/mach-s3c2412/cpu-freq.c                   |   4 +
 arch/arm/plat-s3c24xx/Kconfig                      |   9 +
 arch/arm/plat-s3c24xx/Makefile                     |   1 +
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h |  52 +++-
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c           | 261 +++++++++++++++++++++
 6 files changed, 329 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2412-iotiming.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 79e18340e07..35c1bde89cf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,9 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
 config S3C2412_CPUFREQ
 	bool
 	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	select S3C2412_IOTIMING
 	default y
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 80b20c33447..21a66178d9b 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -185,6 +185,10 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.set_divs	= s3c2412_cpufreq_setdivs,
 	.calc_divs	= s3c2412_cpufreq_calcdivs,
 
+	.calc_iotiming	= s3c2412_iotiming_calc,
+	.set_iotiming	= s3c2412_iotiming_set,
+	.get_iotiming	= s3c2412_iotiming_get,
+
 	.resume_clocks	= s3c2412_setup_clocks,
 };
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index ec9921b6848..f0b9c73fe00 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -157,6 +157,15 @@ config S3C2410_CPUFREQ_UTILS
 	  Internal node to select timing code that is common to the s3c2410
 	  and s3c2440/s3c244 cpu frequency support.
 
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c60317b3491..8759c070fd9 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 7938fb0bc38..f02b3c06c1e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -42,8 +42,44 @@ struct s3c2410_iobank_timing {
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };
 
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+	unsigned int	idcy;
+	unsigned int	wstrd;
+	unsigned int	wstwr;
+	unsigned int	wstoen;
+	unsigned int	wstwen;
+	unsigned int	wstbrd;
+
+	/* register cache */
+	unsigned char	smbidcyr;
+	unsigned char	smbwstrd;
+	unsigned char	smbwstwr;
+	unsigned char	smbwstoen;
+	unsigned char	smbwstwen;
+	unsigned char	smbwstbrd;
+};
+
 union s3c_iobank {
-	  struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2412_iobank_timing	*io_2412;
 };
 
 /**
@@ -174,6 +210,20 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
 #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 00000000000..a3648cba0eb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,261 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
-- 
cgit v1.2.3


From f0176794b6abc2e5239c07a58cf11b6f43d0f185 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:38 +0100
Subject: ARM: S3C2410: Add S3C2410A sysdev.

Add a sysdev S3C2410A sysdev to allow the differentiation
of the S3C2410A from the S3C2410. This is needed for the
CPUFREQ code to enable the extra features and update cpu
specific information.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/dma.c                  | 11 +++++++++++
 arch/arm/mach-s3c2410/irq.c                  | 15 ++++++++++++++-
 arch/arm/mach-s3c2410/pm.c                   | 12 ++++++++++++
 arch/arm/mach-s3c2410/s3c2410.c              | 20 ++++++++++++++++++++
 arch/arm/plat-s3c/include/plat/cpu.h         |  1 +
 arch/arm/plat-s3c24xx/cpu.c                  |  2 +-
 arch/arm/plat-s3c24xx/include/plat/s3c2410.h |  1 +
 7 files changed, 60 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e60d99..63b753f56c6 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
 }
 
 arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 92150399563..5e2f3533205 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
 	.resume		= s3c24xx_irq_resume,
 };
 
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
 {
 	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
 arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a599d..966119c8efe 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1f91..e5724a22c35 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -116,6 +116,13 @@ struct sysdev_class s3c2410_sysclass = {
 	.name = "s3c2410-core",
 };
 
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+	.name = "s3c2410a-core",
+};
+
 static struct sys_device s3c2410_sysdev = {
 	.cls		= &s3c2410_sysclass,
 };
@@ -133,9 +140,22 @@ static int __init s3c2410_core_init(void)
 
 core_initcall(s3c2410_core_init);
 
+static int __init s3c2410a_core_init(void)
+{
+	return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
 int __init s3c2410_init(void)
 {
 	printk("S3C2410: Initialising architecture\n");
 
 	return sysdev_register(&s3c2410_sysdev);
 }
+
+int __init s3c2410a_init(void)
+{
+	s3c2410_sysdev.cls = &s3c2410a_sysclass;
+	return s3c2410_init();
+}
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cbba07..fbc3d498e02 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da1..5447e60f393 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s3c2410_map_io,
 		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
+		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
 	},
 	{
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759..b6deeef8f66 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_CPU_S3C2410
 
 extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
 
 extern void s3c2410_map_io(void);
 
-- 
cgit v1.2.3


From ca0b4901d8faaf98cf254e25cd2784bcb21e46d5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:39 +0100
Subject: ARM: BAST: CPUFREQ: Add board support

Add board support for CPUFREQ with the Simtec BAST board
registering the necessary information with the core.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..d8a26ea92f2 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -59,6 +59,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -570,6 +571,12 @@ static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+	.refresh	= 7800, /* 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -608,6 +615,8 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+
+	s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
-- 
cgit v1.2.3


From ad78759529be38d6aa062233b980095cf74aa7f0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:40 +0100
Subject: ARM: S3C2410: Add armclk for cpufreq support

Add armclk for use with the cpufreq support and anything
else that may want it. This clock is just a direct
descendant of fclk.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/s3c2410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index e5724a22c35..91ba42f688a 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,11 +105,20 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
 	s3c24xx_setup_clocks(fclk, hclk, pclk);
 }
 
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+	.name	= "armclk",
+	.parent	= &clk_f,
+	.id	= -1,
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c24xx_register_baseclocks(xtal);
 	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
+	s3c24xx_register_clock(&s3c2410_armclk);
 }
 
 struct sysdev_class s3c2410_sysclass = {
-- 
cgit v1.2.3


From e6d197a6954c8a9ff85727c31ca61fc1da78628a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:42 +0100
Subject: ARM: S3C: CPUFREQ: Add debugfs support for cpufreq

Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                                   |   6 +
 arch/arm/mach-s3c2410/cpu-freq.c                   |   2 +
 arch/arm/mach-s3c2412/cpu-freq.c                   |   2 +
 arch/arm/plat-s3c24xx/Makefile                     |   1 +
 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c           | 199 +++++++++++++++++++++
 arch/arm/plat-s3c24xx/cpu-freq.c                   |  12 ++
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h |  24 +++
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c           |  45 +++++
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c           |  24 +++
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c            |   2 +
 10 files changed, 317 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7a83efef0b..f07a4ba281b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1329,6 +1329,12 @@ config CPU_FREQ_S3C24XX_IODEBUG
 	help
 	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
 
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index f2cbdbab0df..9d1186877d0 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -111,6 +111,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
 	.set_refresh	= s3c2410_cpufreq_setrefresh,
 	.set_divs	= s3c2410_cpufreq_setdivs,
 	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2410_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 21a66178d9b..eb3ea172133 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -190,6 +190,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.get_iotiming	= s3c2412_iotiming_get,
 
 	.resume_clocks	= s3c2412_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
 };
 
 static int s3c2412_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 8759c070fd9..f3493751580 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -21,6 +21,7 @@ obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
 obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
 # Architecture dependant builds
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 00000000000..a9276667c2f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+		   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_cpufreq_board *brd;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	brd = cfg->board;
+	if (!brd) {
+		seq_printf(seq, "no board definition set?\n");
+		return 0;
+	}
+
+	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+	seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+	show_max(seq, &brd->max);
+
+
+	return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+	.open		= fops_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+	seq_printf(seq, "\n");
+
+	show_max(seq, &cfg->max);
+
+	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+		   cfg->divs.h_divisor, cfg->divs.p_divisor,
+		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+	return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+	.open		= fops_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_iotimings *iot;
+	union s3c_iobank *iob;
+	int bank;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	show_bank = cfg->info->debug_io_show;
+	if (!show_bank) {
+		seq_printf(seq, "no code to show bank timing\n");
+		return 0;
+	}
+
+	iot = s3c_cpufreq_getiotimings();
+	if (!iot) {
+		seq_printf(seq, "no io timings registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		iob = &iot->bank[bank];
+
+		seq_printf(seq, "bank %d: ", bank);
+
+		if (!iob->io_2410) {
+			seq_printf(seq, "nothing set\n");
+			continue;
+		}
+
+		show_bank(seq, cfg, iob);
+	}
+
+	return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+	.open		= fops_io_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+	if (IS_ERR(dbgfs_root)) {
+		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+		return PTR_ERR(dbgfs_root);
+	}
+
+	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+					    NULL, &fops_io);
+
+	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+					      NULL, &fops_info);
+
+	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+					       NULL, &fops_board);
+
+	return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 40ff7e2569d..4f1b789a117 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -50,6 +50,18 @@ static struct clk *clk_hclk;
 static struct clk *clk_pclk;
 static struct clk *clk_arm;
 
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+	return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+	return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
 static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
 {
 	unsigned long fclk, pclk, hclk, armclk;
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index f02b3c06c1e..efeb025affc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -13,6 +13,8 @@
 
 #include <plat/cpu-freq.h>
 
+struct seq_file;
+
 #define MAX_BANKS (8)
 #define S3C2412_MAX_IO	(8)
 
@@ -181,6 +183,10 @@ struct s3c_cpufreq_info {
 					  struct cpufreq_frequency_table *t,
 					  size_t table_size);
 
+	void		(*debug_io_show)(struct seq_file *seq,
+					 struct s3c_cpufreq_config *cfg,
+					 union s3c_iobank *iob);
+
 	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
 	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
 	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
@@ -191,6 +197,24 @@ extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
 
 extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
 
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
 /* Useful utility functions. */
 
 extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index 26fe2129cf2..d0a3a145cd4 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/io.h>
 
 #include <mach/map.h>
@@ -303,6 +304,50 @@ void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
 	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
 }
 
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2410_iobank_timing *bt = iob->io_2410;
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned int tacs;
+	unsigned int tcos;
+	unsigned int tacc;
+	unsigned int tcoh;
+	unsigned int tcah;
+
+	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+	seq_printf(seq,
+		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(bt->tacs),
+		   print_ns(bt->tcos),
+		   print_ns(bt->tacc),
+		   print_ns(bt->tcoh),
+		   print_ns(bt->tcah));
+
+	seq_printf(seq,
+		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(tacs),
+		   print_ns(tcos),
+		   print_ns(tacc),
+		   print_ns(tcoh),
+		   print_ns(tcah));
+}
+
 /**
  * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
  * @cfg: The frequency configuration
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index a3648cba0eb..fd45e47facb 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
@@ -108,6 +109,29 @@ static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
 	return err;
 }
 
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
 /**
  * s3c2412_iotiming_calc - calculate all the bank divisor settings.
  * @cfg: The current frequency configuration.
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index c177a20319e..ae2e6c604f2 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -266,6 +266,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = {
 	.calc_freqtable	= s3c2440_cpufreq_calctable,
 
 	.resume_clocks	= s3c244x_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2440_cpufreq_add(struct sys_device *sysdev)
-- 
cgit v1.2.3


From 165f5f64199f972a21f21effc125d89ed2488e58 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:08 +0200
Subject: ARM: S3C: PWM fix for low duty cycle

The pwm hardware only checks the compare register after a decrement,
so the pin never toggles if tcmp = tcnt.

This happens when a very low duty cycle is requested. Fix it by always
ensuring that tcmp < tcnt.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/pwm.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 0120b760315..82a6d4de02a 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -246,6 +246,10 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 	tcmp = duty_ns / tin_ns;
 	tcmp = tcnt - tcmp;
+	/* the pwm hw only checks the compare register after a decrement,
+	   so the pin never toggles if tcmp = tcnt */
+	if (tcmp == tcnt)
+		tcmp--;
 
 	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
 
-- 
cgit v1.2.3


From 2896bda4824c1e4d34852e355916e34671e38a11 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:09 +0200
Subject: ARM: S3C6410: airgoo hmt board support

Add support for the Airgoo HMT (home media terminal) device.
The HMT is a tablet device with a s3c6410, a 7" LCD and a number
of peripheral connections.

For more details of the hardware specs, see:
http://article.gmane.org/gmane.linux.debian.devel.embedded/4307

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ben-linux@fluff.org: subject rewrite]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig    |  10 ++
 arch/arm/mach-s3c6410/Makefile   |   3 +-
 arch/arm/mach-s3c6410/mach-hmt.c | 276 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 287 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-s3c6410/mach-hmt.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f4e5..f9d0f09f976 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
 	select S3C64XX_SETUP_I2C1
 	help
           Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac8861..3e48c3dbf97 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 00000000000..c5741056193
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+	if (!ret)
+		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+	return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+	/*
+	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
+	 * perceived luminance to light output. Assumes range 0..25600
+	 */
+	if (brightness < 0x800) {
+		/* Y = Yn * L / 903.3 */
+		brightness = (100*256 * brightness + 231245/2) / 231245;
+	} else {
+		/* Y = Yn * ((L + 16) / 116 )^3 */
+		int t = (brightness*4 + 16*1024 + 58)/116;
+		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+	}
+
+	gpio_set_value(S3C64XX_GPB(4), brightness);
+
+	return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+	gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 100 * 256,
+	.dft_brightness	= 40 * 256,
+	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
+	.init		= hmt_bl_init,
+	.notify		= hmt_bl_notify,
+	.exit		= hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &hmt_backlight_data,
+	},
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &hmt_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_512K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "uboot-env1",
+		.size	= SZ_256K,
+		.offset	= SZ_512K,
+	},
+	[2] = {
+		.name	= "uboot-env2",
+		.size	= SZ_256K,
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[4] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
+		.partitions	= hmt_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
+	.sets		= hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+	{ /* left function keys */
+		.name			= "left:blue",
+		.gpio			= S3C64XX_GPO(12),
+		.default_trigger	= "default-on",
+	},
+	{ /* right function keys - red */
+		.name			= "right:red",
+		.gpio			= S3C64XX_GPO(13),
+	},
+	{ /* right function keys - green */
+		.name			= "right:green",
+		.gpio			= S3C64XX_GPO(14),
+	},
+	{ /* right function keys - blue */
+		.name			= "right:blue",
+		.gpio			= S3C64XX_GPO(15),
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+	.num_leds = ARRAY_SIZE(hmt_leds),
+	.leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_timer[1],
+	&hmt_backlight_device,
+	&hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&hmt_lcd_pdata);
+	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+	gpio_request(S3C64XX_GPC(7), "usb power");
+	gpio_direction_output(S3C64XX_GPC(7), 0);
+	gpio_request(S3C64XX_GPM(0), "usb power");
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_request(S3C64XX_GPK(7), "usb power");
+	gpio_direction_output(S3C64XX_GPK(7), 1);
+	gpio_request(S3C64XX_GPF(13), "usb power");
+	gpio_direction_output(S3C64XX_GPF(13), 1);
+
+	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= hmt_map_io,
+	.init_machine	= hmt_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 14077ea63b5aea1db0142c1085d24aa0d11b9d36 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:06 +0200
Subject: ARM: S3C: move s3c_device_nand from plat-s3c24xx to plat-s3c

Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c,
now that the nand driver also support the s3c64xx devices.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h |  1 +
 arch/arm/mach-s3c24a0/include/mach/map.h |  1 +
 arch/arm/mach-s3c6400/include/mach/map.h |  2 ++
 arch/arm/mach-s3c6400/s3c6400.c          |  2 ++
 arch/arm/mach-s3c6410/cpu.c              |  2 ++
 arch/arm/plat-s3c/Makefile               |  1 +
 arch/arm/plat-s3c/dev-nand.c             | 30 ++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/devs.c             | 19 -------------------
 8 files changed, 39 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-s3c/dev-nand.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..e9821850065 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -103,5 +103,6 @@
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
+#define S3C_PA_NAND	    S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a01132717e3..79e4d93ea2b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
 
 #define S3C_PA_UART		S3C24A0_PA_UART
 #define S3C_PA_IIC		S3C24A0_PA_IIC
+#define S3C_PA_NAND		S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..fba241a7198 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,6 +38,7 @@
 #define S3C_VA_UART2		S3C_VA_UARTx(2)
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
@@ -72,6 +73,7 @@
 #define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887d90b..b42bdd0f213 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904de889..9b67c663d9d 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766b183..d0b4a0fda5c 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-y				+= dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 00000000000..4e532373243
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+	[0] = {
+		.start = S3C_PA_NAND,
+		.end   = S3C_PA_NAND + SZ_1M,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+struct platform_device s3c_device_nand = {
+	.name		  = "s3c2410-nand",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
+	.resource	  = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..20c114d6f61 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -180,25 +180,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 	}
 }
 
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_NAND,
-		.end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
-- 
cgit v1.2.3


From b5ead1cda64336b589eb4353e00f69c818fb6603 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:07 +0200
Subject: ARM: S3C: move timer/pwm handling from plat-s3c24xx to plat-s3c

The s3c64xx devices use the same hardware core as s3c24xx, so move
the timer/pwm handling to plat-s3c so it can be used by both.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile     |   4 +
 arch/arm/plat-s3c/pwm.c        | 406 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/Makefile |   1 -
 arch/arm/plat-s3c24xx/pwm.c    | 405 ----------------------------------------
 4 files changed, 410 insertions(+), 406 deletions(-)
 create mode 100644 arch/arm/plat-s3c/pwm.c
 delete mode 100644 arch/arm/plat-s3c24xx/pwm.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index d0b4a0fda5c..3e27720ae35 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,6 +28,10 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
new file mode 100644
index 00000000000..f3d37ac5595
--- /dev/null
+++ b/arch/arm/plat-s3c/pwm.c
@@ -0,0 +1,406 @@
+/* arch/arm/plat-s3c/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C series PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+
+struct pwm_device {
+	struct list_head	 list;
+	struct platform_device	*pdev;
+
+	struct clk		*clk_div;
+	struct clk		*clk;
+	const char		*label;
+
+	unsigned int		 period_ns;
+	unsigned int		 duty_ns;
+
+	unsigned char		 tcon_base;
+	unsigned char		 running;
+	unsigned char		 use_count;
+	unsigned char		 pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq)			\
+	(struct resource [TIMER_RESOURCE_SIZE]) {	\
+		[0] = {					\
+			.start	= _irq,			\
+			.end	= _irq,			\
+			.flags	= IORESOURCE_IRQ	\
+		}					\
+	}
+
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
+	.name		= "s3c24xx-pwm",		\
+	.id		= _tmr_no,			\
+	.num_resources	= TIMER_RESOURCE_SIZE,		\
+	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+	return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, list) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count = 1;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+	mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 1;
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon &= ~pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+	unsigned long tin_parent_rate;
+	unsigned int div;
+
+	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+	for (div = 2; div <= 16; div *= 2) {
+		if ((tin_parent_rate / (div << 16)) < freq)
+			return tin_parent_rate / div;
+	}
+
+	return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long tin_rate;
+	unsigned long tin_ns;
+	unsigned long period;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned long tcnt;
+	long tcmp;
+
+	/* We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits. */
+
+	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+		return -ERANGE;
+
+	if (duty_ns > period_ns)
+		return -EINVAL;
+
+	if (period_ns == pwm->period_ns &&
+	    duty_ns == pwm->duty_ns)
+		return 0;
+
+	/* The TCMP and TCNT can be read without a lock, they're not
+	 * shared between the timers. */
+
+	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+	period = NS_IN_HZ / period_ns;
+
+	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+		duty_ns, period_ns, period);
+
+	/* Check to see if we are changing the clock rate of the PWM */
+
+	if (pwm->period_ns != period_ns) {
+		if (pwm_is_tdiv(pwm)) {
+			tin_rate = pwm_calc_tin(pwm, period);
+			clk_set_rate(pwm->clk_div, tin_rate);
+		} else
+			tin_rate = clk_get_rate(pwm->clk);
+
+		pwm->period_ns = period_ns;
+
+		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NS_IN_HZ / tin_rate;
+		tcnt = period_ns / tin_ns;
+	} else
+		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+	/* Note, counters count down */
+
+	tcmp = duty_ns / tin_ns;
+	tcmp = tcnt - tcmp;
+
+	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+	if (tcmp < 0)
+		tcmp = 0;
+
+	/* Update the PWM register block. */
+
+	local_irq_save(flags);
+
+	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_manulupdate(pwm);
+	tcon |= pwm_tcon_autoreload(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	tcon &= ~pwm_tcon_manulupdate(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+	pwm->duty_ns = -1;
+	pwm->period_ns = -1;
+
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->list, &pwm_list);
+	mutex_unlock(&pwm_lock);
+
+	return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pwm_device *pwm;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned int id = pdev->id;
+	int ret;
+
+	if (id == 4) {
+		dev_err(dev, "TIMER4 is currently not supported\n");
+		return -ENXIO;
+	}
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(dev, "failed to allocate pwm_device\n");
+		return -ENOMEM;
+	}
+
+	pwm->pdev = pdev;
+	pwm->pwm_id = id;
+
+	/* calculate base of control bits in TCON */
+	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+	pwm->clk = clk_get(dev, "pwm-tin");
+	if (IS_ERR(pwm->clk)) {
+		dev_err(dev, "failed to get pwm tin clk\n");
+		ret = PTR_ERR(pwm->clk);
+		goto err_alloc;
+	}
+
+	pwm->clk_div = clk_get(dev, "pwm-tdiv");
+	if (IS_ERR(pwm->clk_div)) {
+		dev_err(dev, "failed to get pwm tdiv clk\n");
+		ret = PTR_ERR(pwm->clk_div);
+		goto err_clk_tin;
+	}
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_invert(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+
+	ret = pwm_register(pwm);
+	if (ret) {
+		dev_err(dev, "failed to register pwm\n");
+		goto err_clk_tdiv;
+	}
+
+	pwm_dbg(pwm, "config bits %02x\n",
+		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+		 clk_get_rate(pwm->clk),
+		 clk_get_rate(pwm->clk_div),
+		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+ err_clk_tdiv:
+	clk_put(pwm->clk_div);
+
+ err_clk_tin:
+	clk_put(pwm->clk);
+
+ err_alloc:
+	kfree(pwm);
+	return ret;
+}
+
+static int s3c_pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+	clk_put(pwm->clk_div);
+	clk_put(pwm->clk);
+	kfree(pwm);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pwm_driver = {
+	.driver		= {
+		.name	= "s3c24xx-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_pwm_probe,
+	.remove		= __devexit_p(s3c_pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+	int ret;
+
+	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = platform_driver_register(&s3c_pwm_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+	return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..0807831c992 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
deleted file mode 100644
index 0120b760315..00000000000
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/* arch/arm/plat-s3c24xx/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C24XX PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-
-struct pwm_device {
-	struct list_head	 list;
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 running;
-	unsigned char		 use_count;
-	unsigned char		 pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-/* Standard setup for a timer block. */
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/* since we already have an static mapping for the timer, we do not
- * bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
-	return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, list) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count = 1;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
-	mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
-	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
-	if (period_ns == pwm->period_ns &&
-	    duty_ns == pwm->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (pwm->period_ns != period_ns) {
-		if (pwm_is_tdiv(pwm)) {
-			tin_rate = pwm_calc_tin(pwm, period);
-			clk_set_rate(pwm->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(pwm->clk);
-
-		pwm->period_ns = period_ns;
-
-		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-
-	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(pwm);
-	tcon |= pwm_tcon_autoreload(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
-	pwm->duty_ns = -1;
-	pwm->period_ns = -1;
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->list, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct pwm_device *pwm;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	pwm->pdev = pdev;
-	pwm->pwm_id = id;
-
-	/* calculate base of control bits in TCON */
-	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
-	pwm->clk = clk_get(dev, "pwm-tin");
-	if (IS_ERR(pwm->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		ret = PTR_ERR(pwm->clk);
-		goto err_alloc;
-	}
-
-	pwm->clk_div = clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(pwm->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		ret = PTR_ERR(pwm->clk_div);
-		goto err_clk_tin;
-	}
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-
-	ret = pwm_register(pwm);
-	if (ret) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(pwm, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(pwm->clk),
-		 clk_get_rate(pwm->clk_div),
-		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
- err_clk_tdiv:
-	clk_put(pwm->clk_div);
-
- err_clk_tin:
-	clk_put(pwm->clk);
-
- err_alloc:
-	kfree(pwm);
-	return ret;
-}
-
-static int s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	clk_put(pwm->clk_div);
-	clk_put(pwm->clk);
-	kfree(pwm);
-
-	return 0;
-}
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= __devexit_p(s3c_pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(pwm_init);
-- 
cgit v1.2.3


From bdc6340f4eb68295b1e7c0ade2356b56dca93d93 Mon Sep 17 00:00:00 2001
From: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
Date: Thu, 30 Jul 2009 14:43:19 -0700
Subject: x86, pat: Fix set_memory_wc related corruption

Changeset 3869c4aa18835c8c61b44bd0f3ace36e9d3b5bd0
that went in after 2.6.30-rc1 was a seemingly small change to _set_memory_wc()
to make it complaint with SDM requirements. But, introduced a nasty bug, which
can result in crash and/or strange corruptions when set_memory_wc is used.
One such crash reported here
http://lkml.org/lkml/2009/7/30/94

Actually, that changeset introduced two bugs.
* change_page_attr_set() takes &addr as first argument and can the addr value
  might have changed on return, even for single page change_page_attr_set()
  call. That will make the second change_page_attr_set() in this routine
  operate on unrelated addr, that can eventually cause strange corruptions
  and bad page state crash.
* The second change_page_attr_set() call, before setting _PAGE_CACHE_WC, should
  clear the earlier _PAGE_CACHE_UC_MINUS, as otherwise cache attribute will not
  be WC (will be UC instead).

The patch below fixes both these problems. Sending a single patch to fix both
the problems, as the change is to the same line of code. The change to have a
addr_copy is not very clean. But, it is simpler than making more changes
through various routines in pageattr.c.

A huge thanks to Jerome for reporting this problem and providing a simple test
case that helped us root cause the problem.

Reported-by: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20090730214319.GA1889@linux-os.sc.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pageattr.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1b734d7a896..895d90e1a81 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -997,12 +997,15 @@ EXPORT_SYMBOL(set_memory_array_uc);
 int _set_memory_wc(unsigned long addr, int numpages)
 {
 	int ret;
+	unsigned long addr_copy = addr;
+
 	ret = change_page_attr_set(&addr, numpages,
 				    __pgprot(_PAGE_CACHE_UC_MINUS), 0);
-
 	if (!ret) {
-		ret = change_page_attr_set(&addr, numpages,
-				    __pgprot(_PAGE_CACHE_WC), 0);
+		ret = change_page_attr_set_clr(&addr_copy, numpages,
+					       __pgprot(_PAGE_CACHE_WC),
+					       __pgprot(_PAGE_CACHE_MASK),
+					       0, 0, NULL);
 	}
 	return ret;
 }
-- 
cgit v1.2.3


From ff46a474ca2566d79e8d7454442b56d82bce37c1 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Fri, 31 Jul 2009 15:42:09 +0200
Subject: mx3: Fix double pin allocation in pcm037_eet.c

SPI pins are now allocated in pcm037.c, remove them from EET.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037_eet.c | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c
index fe52fb1bb8b..8d386000fc4 100644
--- a/arch/arm/mach-mx3/pcm037_eet.c
+++ b/arch/arm/mach-mx3/pcm037_eet.c
@@ -24,15 +24,6 @@
 #include "devices.h"
 
 static unsigned int pcm037_eet_pins[] = {
-	/* SPI #1 */
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
-
 	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
 	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
 	/* GPIO keys */
-- 
cgit v1.2.3


From 897bd6a363770ced6b78f6ae8882325c7590ed8b Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:29:45 +0100
Subject: ARM: 5633/1: Add wdt resource for w90p910 platform

Add wdt resource for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3e3a267b2dd..117578aed68 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -340,6 +340,28 @@ static struct spi_board_info w90p910_spi_board_info[] __initdata = {
 	},
 };
 
+/* WDT Device */
+
+static struct resource w90p910_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_wdt = {
+	.name		= "w90p910-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
+	.resource	= w90p910_wdt_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -357,6 +379,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
 	&w90p910_device_spi,
+	&w90p910_device_wdt,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From ae45b1c618d9e645a5e1decff31b710f739745fa Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:30:32 +0100
Subject: ARM: 5634/1: Add static setting cpu frequence for w90p910 platform

Add static setting cpu frequence for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile                  |  2 +-
 arch/arm/mach-w90x900/clksel.c                  | 91 +++++++++++++++++++++++++
 arch/arm/mach-w90x900/cpu.h                     |  1 +
 arch/arm/mach-w90x900/include/mach/regs-clock.h | 22 ++++++
 arch/arm/mach-w90x900/include/mach/regs-ebi.h   | 33 +++++++++
 arch/arm/mach-w90x900/w90p910.c                 | 80 ++++++++++++++++++++++
 6 files changed, 228 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-w90x900/clksel.c
 create mode 100644 arch/arm/mach-w90x900/include/mach/regs-ebi.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f4dbd..3ccd625455c 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -5,7 +5,7 @@
 # Object file lists.
 
 obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y				+= clksel.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 00000000000..5a77eb91cb1
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0		0x00
+#define PLL1		0x01
+#define OTHER		0x02
+#define EXT		0x03
+#define MSOFFSET	0x0C
+#define ATAOFFSET	0x0a
+#define LCDOFFSET	0x06
+#define AUDOFFSET	0x04
+#define CPUOFFSET	0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+	unsigned int clksel, offset;
+
+	clksel = __raw_readl(REG_CLKSEL);
+
+	if (strcmp(dev_id, "w90p910-ms") == 0)
+		offset = MSOFFSET;
+	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+		offset = ATAOFFSET;
+	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+		offset = LCDOFFSET;
+	else if (strcmp(dev_id, "w90p910-audio") == 0)
+		offset = AUDOFFSET;
+	else
+		offset = CPUOFFSET;
+
+	clksel &= ~(0x03 << offset);
+	clksel |= (clkval << offset);
+
+	__raw_writel(clksel, REG_CLKSEL);
+}
+
+void w90p910_clock_source(struct device *dev, unsigned char *src)
+{
+	unsigned int clkval;
+	const char *dev_id;
+
+	BUG_ON(!src);
+	clkval = 0;
+
+	mutex_lock(&clksel_sem);
+
+	if (dev)
+		dev_id = dev_name(dev);
+	else
+		dev_id = "cpufreq";
+
+	if (strcmp(src, "pll0") == 0)
+		clkval = PLL0;
+	else if (strcmp(src, "pll1") == 0)
+		clkval = PLL1;
+	else if (strcmp(src, "ext") == 0)
+		clkval = EXT;
+	else if (strcmp(src, "oth") == 0)
+		clkval = OTHER;
+
+	clock_source_select(dev_id, clkval);
+
+	mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(w90p910_clock_source);
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dbabeb4..ddde959d898 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -45,6 +45,7 @@ extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
+extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 
 #define W90X900_8250PORT(name)					\
 {								\
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8dc06..516d6b477b6 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
 #define REG_CLKEN1	(CLK_BA + 0x24)
 #define REG_CLKDIV1	(CLK_BA + 0x28)
 
+/* Define PLL freq setting */
+#define PLL_DISABLE		0x12B63
+#define	PLL_66MHZ		0x2B63
+#define	PLL_100MHZ		0x4F64
+#define PLL_120MHZ		0x4F63
+#define	PLL_166MHZ		0x4124
+#define	PLL_200MHZ		0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define	AHB_CPUCLK_1_1		0x00
+#define	AHB_CPUCLK_1_2		0x01
+#define	AHB_CPUCLK_1_4		0x02
+#define	AHB_CPUCLK_1_8		0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2		0x01
+#define APB_AHB_1_4		0x02
+#define APB_AHB_1_8		0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW		0x48
+
 #endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 00000000000..b68455e7f88
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA		W90X900_VA_EBI
+#define REG_EBICON	(EBI_BA + 0x00)
+#define REG_ROMCON	(EBI_BA + 0x04)
+#define REG_SDCONF0	(EBI_BA + 0x08)
+#define REG_SDCONF1	(EBI_BA + 0x0C)
+#define REG_SDTIME0	(EBI_BA + 0x10)
+#define REG_SDTIME1	(EBI_BA + 0x14)
+#define REG_EXT0CON	(EBI_BA + 0x18)
+#define REG_EXT1CON	(EBI_BA + 0x1C)
+#define REG_EXT2CON	(EBI_BA + 0x20)
+#define REG_EXT3CON	(EBI_BA + 0x24)
+#define REG_EXT4CON	(EBI_BA + 0x28)
+#define REG_CKSKEW	(EBI_BA + 0x2C)
+
+#endif /*  __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 6ebf5cfc78d..8444eababaa 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/serial_8250.h>
+#include <linux/delay.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,6 +33,8 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
 
 #include "cpu.h"
 #include "clock.h"
@@ -123,6 +126,83 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
 }
 
+/*Set W90P910 cpu frequence*/
+static int __init w90p910_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init w90p910_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	w90p910_clock_source(NULL, "ext");
+
+	w90p910_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	w90p910_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", w90p910_set_cpufreq);
+
 /*Init W90P910 clock*/
 
 void __init w90p910_init_clocks(void)
-- 
cgit v1.2.3


From fb85205ada3fef98122a40b700ecb71efb33ae71 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:23:24 +0100
Subject: ARM: 5631/1: Platform data for CF/IDE support in AT91SAM9260

This patch adds platform data for CF/IDE support
and SMC init code for AT91SAM9260 SoC.

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9260_devices.c | 116 +++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d74c9ac007e..ee4ea0e720c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  CF/IDE
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
+	defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	struct platform_device *pdev;
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+	switch (data->chipselect) {
+	case 4:
+		at91_set_multi_drive(AT91_PIN_PC8, 0);
+		at91_set_A_periph(AT91_PIN_PC8, 0);
+		csa |= AT91_MATRIX_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_multi_drive(AT91_PIN_PC9, 0);
+		at91_set_A_periph(AT91_PIN_PC9, 0);
+		csa |= AT91_MATRIX_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+
+	at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+	if (data->rst_pin) {
+		at91_set_multi_drive(data->rst_pin, 0);
+		at91_set_gpio_output(data->rst_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 0);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 0);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	at91_set_B_periph(AT91_PIN_PC6, 0);     /* CFCE1 */
+	at91_set_B_periph(AT91_PIN_PC7, 0);     /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
+	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
+
+	if (data->flags & AT91_CF_TRUE_IDE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+		pdev->name = "pata_at91";
+#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+		pdev->name = "at91_ide";
+#else
+#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#endif
+	else
+		pdev->name = "at91_cf";
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_cf(struct at91_cf_data * data) {}
+#endif
 
 /* -------------------------------------------------------------------- */
 /*
-- 
cgit v1.2.3


From 0c30df6fe0bd1e3845357e793dc1bfd908751c45 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:29:07 +0100
Subject: ARM: 5632/1: Board-specific data for IDE support on afeb9260

This patch adds board-specific data for IDE support on afeb9260.

Depends on #5631/1

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-afeb-9260v1.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 970fd6b6753..61e52b66bc7 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -174,6 +174,16 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	},
 };
 
+/*
+ * IDE (CF True IDE mode)
+ */
+static struct at91_cf_data afeb9260_cf_data = {
+	.chipselect = 4,
+	.irq_pin    = AT91_PIN_PA6,
+	.rst_pin    = AT91_PIN_PA7,
+	.flags      = AT91_CF_TRUE_IDE,
+};
+
 static void __init afeb9260_board_init(void)
 {
 	/* Serial */
@@ -202,6 +212,8 @@ static void __init afeb9260_board_init(void)
 			ARRAY_SIZE(afeb9260_i2c_devices));
 	/* Audio */
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+	/* IDE */
+	at91_add_device_cf(&afeb9260_cf_data);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
-- 
cgit v1.2.3


From a084fcfae541abc0eeecdd73ceeb01fb2453df4e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 1 Aug 2009 16:26:03 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 30af4329469..200d83a9828 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jul 9 20:56:13 2009
+# Last update: Sat Aug 1 16:26:02 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2313,3 +2313,39 @@ openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
 incredible		MACH_INCREDIBLE		INCREDIBLE		2326
 incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
 heroct			MACH_HEROCT		HEROCT			2328
+mmnet1000		MACH_MMNET1000		MMNET1000		2329
+devkit8000		MACH_DEVKIT8000		DEVKIT8000		2330
+devkit9000		MACH_DEVKIT9000		DEVKIT9000		2331
+mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
+u380			MACH_U380		U380			2333
+oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
+npcmx50			MACH_NPCMX50		NPCMX50			2335
+mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
+riom			MACH_RIOM		RIOM			2338
+comcas			MACH_COMCAS		COMCAS			2339
+wsi_mx27		MACH_WSI_MX27		WSI_MX27		2340
+cm_t35			MACH_CM_T35		CM_T35			2341
+net2big			MACH_NET2BIG		NET2BIG			2342
+motorola_a1600		MACH_MOTOROLA_A1600	MOTOROLA_A1600		2343
+igep0020		MACH_IGEP0020		IGEP0020		2344
+igep0010		MACH_IGEP0010		IGEP0010		2345
+mv6281gtwge2		MACH_MV6281GTWGE2	MV6281GTWGE2		2346
+scat100			MACH_SCAT100		SCAT100			2347
+sanmina			MACH_SANMINA		SANMINA			2348
+momento			MACH_MOMENTO		MOMENTO			2349
+nuc9xx			MACH_NUC9XX		NUC9XX			2350
+nuc910evb		MACH_NUC910EVB		NUC910EVB		2351
+nuc920evb		MACH_NUC920EVB		NUC920EVB		2352
+nuc950evb		MACH_NUC950EVB		NUC950EVB		2353
+nuc945evb		MACH_NUC945EVB		NUC945EVB		2354
+nuc960evb		MACH_NUC960EVB		NUC960EVB		2355
+nuc932evb		MACH_NUC932EVB		NUC932EVB		2356
+nuc900			MACH_NUC900		NUC900			2357
+sd1soc			MACH_SD1SOC		SD1SOC			2358
+ln2440bc		MACH_LN2440BC		LN2440BC		2359
+rsbc			MACH_RSBC		RSBC			2360
+openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
+hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
+wayland			MACH_WAYLAND		WAYLAND			2363
+acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
-- 
cgit v1.2.3


From b4f2e2ad5348063ef94aa623f6f09b52ecaf0990 Mon Sep 17 00:00:00 2001
From: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Date: Sun, 2 Aug 2009 12:34:08 +0200
Subject: parisc: Fix GOT overflow during module load on 64bit kernel

Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Helge Deller <deller@gmx.de>
---
 arch/parisc/kernel/module.c | 50 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 45 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index ef5caf2e6ed..61ee0eec4e6 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -86,8 +86,12 @@
  * the bottom of the table, which has a maximum signed displacement of
  * 0x3fff; however, since we're only going forward, this becomes
  * 0x1fff, and thus, since each GOT entry is 8 bytes long we can have
- * at most 1023 entries */
-#define MAX_GOTS	1023
+ * at most 1023 entries.
+ * To overcome this 14bit displacement with some kernel modules, we'll
+ * use instead the unusal 16bit displacement method (see reassemble_16a)
+ * which gives us a maximum positive displacement of 0x7fff, and as such
+ * allows us to allocate up to 4095 GOT entries. */
+#define MAX_GOTS	4095
 
 /* three functions to determine where in the module core
  * or init pieces the location is */
@@ -145,12 +149,40 @@ struct stub_entry {
 /* The reassemble_* functions prepare an immediate value for
    insertion into an opcode. pa-risc uses all sorts of weird bitfields
    in the instruction to hold the value.  */
+static inline int sign_unext(int x, int len)
+{
+	int len_ones;
+
+	len_ones = (1 << len) - 1;
+	return x & len_ones;
+}
+
+static inline int low_sign_unext(int x, int len)
+{
+	int sign, temp;
+
+	sign = (x >> (len-1)) & 1;
+	temp = sign_unext(x, len-1);
+	return (temp << 1) | sign;
+}
+
 static inline int reassemble_14(int as14)
 {
 	return (((as14 & 0x1fff) << 1) |
 		((as14 & 0x2000) >> 13));
 }
 
+static inline int reassemble_16a(int as16)
+{
+	int s, t;
+
+	/* Unusual 16-bit encoding, for wide mode only.  */
+	t = (as16 << 1) & 0xffff;
+	s = (as16 & 0x8000);
+	return (t ^ s ^ (s >> 1)) | (s >> 15);
+}
+
+
 static inline int reassemble_17(int as17)
 {
 	return (((as17 & 0x10000) >> 16) |
@@ -407,6 +439,7 @@ static Elf_Addr get_stub(struct module *me, unsigned long value, long addend,
 	enum elf_stub_type stub_type, Elf_Addr loc0, unsigned int targetsec)
 {
 	struct stub_entry *stub;
+	int __maybe_unused d;
 
 	/* initialize stub_offset to point in front of the section */
 	if (!me->arch.section[targetsec].stub_offset) {
@@ -460,12 +493,19 @@ static Elf_Addr get_stub(struct module *me, unsigned long value, long addend,
  */
 	switch (stub_type) {
 	case ELF_STUB_GOT:
-		stub->insns[0] = 0x537b0000;	/* ldd 0(%dp),%dp	*/
+		d = get_got(me, value, addend);
+		if (d <= 15) {
+			/* Format 5 */
+			stub->insns[0] = 0x0f6010db; /* ldd 0(%dp),%dp	*/
+			stub->insns[0] |= low_sign_unext(d, 5) << 16;
+		} else {
+			/* Format 3 */
+			stub->insns[0] = 0x537b0000; /* ldd 0(%dp),%dp	*/
+			stub->insns[0] |= reassemble_16a(d);
+		}
 		stub->insns[1] = 0x53610020;	/* ldd 10(%dp),%r1	*/
 		stub->insns[2] = 0xe820d000;	/* bve (%r1)		*/
 		stub->insns[3] = 0x537b0030;	/* ldd 18(%dp),%dp	*/
-
-		stub->insns[0] |= reassemble_14(get_got(me, value, addend) & 0x3fff);
 		break;
 	case ELF_STUB_MILLI:
 		stub->insns[0] = 0x20200000;	/* ldil 0,%r1		*/
-- 
cgit v1.2.3


From 2678251b207394aa8b9d92c653c05a8b3449f1f5 Mon Sep 17 00:00:00 2001
From: John David Anglin <dave@hiauly1.hia.nrc.ca>
Date: Mon, 13 Jul 2009 01:44:37 +0000
Subject: parisc: Set correct bit in protection flags

Signed-off-by: John David Anglin <dave@hiauly1.hia.nrc.ca>
Signed-off-by: Helge Deller <deller@gmx.de>
---
 arch/parisc/kernel/entry.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index ae3e70cd1e1..e552e547cb9 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -553,7 +553,7 @@
 	 * on most of those machines only handles cache transactions.
 	 */
 	extrd,u,*=	\pte,_PAGE_NO_CACHE_BIT+32,1,%r0
-	depi		1,12,1,\prot
+	depdi		1,12,1,\prot
 
 	/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
 	convert_for_tlb_insert20 \pte
-- 
cgit v1.2.3


From c1dc0b9c0c8979ce4d411caadff5c0d79dee58bc Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 2 Aug 2009 11:28:21 +0200
Subject: debug lockups: Improve lockup detection

When debugging a recent lockup bug i found various deficiencies
in how our current lockup detection helpers work:

 - SysRq-L is not very efficient as it uses a workqueue, hence
   it cannot punch through hard lockups and cannot see through
   most soft lockups either.

 - The SysRq-L code depends on the NMI watchdog - which is off
   by default.

 - We dont print backtraces from the RCU code's built-in
   'RCU state machine is stuck' debug code. This debug
   code tends to be one of the first (and only) mechanisms
   that show that a lockup has occured.

This patch changes the code so taht we:

 - Trigger the NMI backtrace code from SysRq-L instead of using
   a workqueue (which cannot punch through hard lockups)

 - Trigger print-all-CPU-backtraces from the RCU lockup detection
   code

Also decouple the backtrace printing code from the NMI watchdog:

 - Dont use variable size cpumasks (it might not be initialized
   and they are a bit more fragile anyway)

 - Trigger an NMI immediately via an IPI, instead of waiting
   for the NMI tick to occur. This is a lot faster and can
   produce more relevant backtraces. It will also work if the
   NMI watchdog is disabled.

 - Dont print the 'dazed and confused' message when we print
   a backtrace from the NMI

 - Do a show_regs() plus a dump_stack() to get maximum info
   out of the dump. Worst-case we get two stacktraces - which
   is not a big deal. Sometimes, if register content is
   corrupted, the precise stack walker in show_regs() wont
   give us a full backtrace - in this case dump_stack() will
   do it.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/nmi.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index b3025b43b63..1bb1ac20e9e 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -39,7 +39,7 @@
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
 
-static cpumask_var_t backtrace_mask;
+static cpumask_t backtrace_mask __read_mostly;
 
 /* nmi_active:
  * >0: the lapic NMI watchdog is active, but can be disabled
@@ -138,7 +138,6 @@ int __init check_nmi_watchdog(void)
 	if (!prev_nmi_count)
 		goto error;
 
-	alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
 #ifdef CONFIG_SMP
@@ -415,14 +414,17 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 	}
 
 	/* We can be called before check_nmi_watchdog, hence NULL check. */
-	if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
+	if (cpumask_test_cpu(cpu, &backtrace_mask)) {
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
 		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
+		show_regs(regs);
 		dump_stack();
 		spin_unlock(&lock);
-		cpumask_clear_cpu(cpu, backtrace_mask);
+		cpumask_clear_cpu(cpu, &backtrace_mask);
+
+		rc = 1;
 	}
 
 	/* Could check oops_in_progress here too, but it's safer not to */
@@ -556,10 +558,14 @@ void __trigger_all_cpu_backtrace(void)
 {
 	int i;
 
-	cpumask_copy(backtrace_mask, cpu_online_mask);
+	cpumask_copy(&backtrace_mask, cpu_online_mask);
+
+	printk(KERN_INFO "sending NMI to all CPUs:\n");
+	apic->send_IPI_all(NMI_VECTOR);
+
 	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
 	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(backtrace_mask))
+		if (cpumask_empty(&backtrace_mask))
 			break;
 		mdelay(1);
 	}
-- 
cgit v1.2.3


From 25f6e89bedd29cc49bfa0d55497e91a671b9ae6e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 30 Jul 2009 23:21:18 +0200
Subject: x86: Remove superfluous NULL pointer check in destroy_irq()

This takes care of the following entry from Dan's list:

  arch/x86/kernel/apic/io_apic.c +3241 destroy_irq(11) warning: variable derefenced before check 'desc'

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Julia Lawall <julia@diku.dk>
LKML-Reference: <200907302321.19086.bzolnier@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index cf51b0b58c5..7e92a9212fd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3185,8 +3185,7 @@ void destroy_irq(unsigned int irq)
 	cfg = desc->chip_data;
 	dynamic_irq_cleanup(irq);
 	/* connect back irq_cfg */
-	if (desc)
-		desc->chip_data = cfg;
+	desc->chip_data = cfg;
 
 	free_irte(irq);
 	spin_lock_irqsave(&vector_lock, flags);
-- 
cgit v1.2.3


From a923c28fc538a4161b15e9b5d7d48248d73d3e6f Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 2 Aug 2009 19:17:15 -0700
Subject: sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM.

As noted by Nick Piggin.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/mm/fault_32.c | 7 ++++---
 arch/sparc/mm/fault_64.c | 7 ++++---
 2 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index a5e30c642ee..b99f81c4906 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -319,9 +319,10 @@ no_context:
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", tsk->comm);
-	if (from_user)
-		do_group_exit(SIGKILL);
+	if (from_user) {
+		pagefault_out_of_memory();
+		return;
+	}
 	goto no_context;
 
 do_sigbus:
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index e5620b27c8b..43b0da96a4f 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -447,9 +447,10 @@ handle_kernel_fault:
 out_of_memory:
 	insn = get_fault_insn(regs, insn);
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", current->comm);
-	if (!(regs->tstate & TSTATE_PRIV))
-		do_group_exit(SIGKILL);
+	if (!(regs->tstate & TSTATE_PRIV)) {
+		pagefault_out_of_memory();
+		return;
+	}
 	goto handle_kernel_fault;
 
 intr_or_no_mm:
-- 
cgit v1.2.3


From 47cab6a722d44c71c4f8224017ef548522243cf4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 3 Aug 2009 09:31:54 +0200
Subject: debug lockups: Improve lockup detection, fix generic arch fallback

As Andrew noted, my previous patch ("debug lockups: Improve lockup
detection") broke/removed SysRq-L support from architecture that do
not provide a __trigger_all_cpu_backtrace implementation.

Restore a fallback path and clean up the SysRq-L machinery a bit:

 - Rename the arch method to arch_trigger_all_cpu_backtrace()

 - Simplify the define

 - Document the method a bit - in the hope of more architectures
   adding support for it.

[ The patch touches Sparc code for the rename. ]

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
LKML-Reference: <20090802140809.7ec4bb6b.akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/irq_64.h | 4 ++--
 arch/sparc/kernel/process_64.c  | 4 ++--
 arch/x86/include/asm/nmi.h      | 4 ++--
 arch/x86/kernel/apic/nmi.c      | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
index 1934f2cbf51..a0b443cb3c1 100644
--- a/arch/sparc/include/asm/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -89,8 +89,8 @@ static inline unsigned long get_softint(void)
 	return retval;
 }
 
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
 
 extern void *hardirq_stack[NR_CPUS];
 extern void *softirq_stack[NR_CPUS];
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 4041f94e772..18d67854a1b 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -251,7 +251,7 @@ static void __global_reg_poll(struct global_reg_snapshot *gp)
 	}
 }
 
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
@@ -304,7 +304,7 @@ void __trigger_all_cpu_backtrace(void)
 
 static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 {
-	__trigger_all_cpu_backtrace();
+	arch_trigger_all_cpu_backtrace();
 }
 
 static struct sysrq_key_op sparc_globalreg_op = {
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c86e5ed4af5..e63cf7d441e 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -45,8 +45,8 @@ extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
 			void __user *, size_t *, loff_t *);
 extern int unknown_nmi_panic;
 
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
 
 static inline void localise_nmi_watchdog(void)
 {
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index 1bb1ac20e9e..db7220220d0 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -554,7 +554,7 @@ int do_nmi_callback(struct pt_regs *regs, int cpu)
 	return 0;
 }
 
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
 
-- 
cgit v1.2.3


From 6a12235c7d2d75c7d94b9afcaaecd422ff845ce0 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Wed, 29 Jul 2009 10:25:58 +0100
Subject: agp: kill phys_to_gart() and gart_to_phys()

There seems to be no reason for these -- they're a 1:1 mapping on all
platforms.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/alpha/include/asm/agp.h   | 4 ----
 arch/ia64/include/asm/agp.h    | 4 ----
 arch/parisc/include/asm/agp.h  | 4 ----
 arch/powerpc/include/asm/agp.h | 4 ----
 arch/sparc/include/asm/agp.h   | 4 ----
 arch/x86/include/asm/agp.h     | 4 ----
 6 files changed, 24 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
index 26c17913529..a94d48b8677 100644
--- a/arch/alpha/include/asm/agp.h
+++ b/arch/alpha/include/asm/agp.h
@@ -9,10 +9,6 @@
 #define unmap_page_from_agp(page) 
 #define flush_agp_cache() mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/ia64/include/asm/agp.h b/arch/ia64/include/asm/agp.h
index c11fdd8ab4d..01d09c401c5 100644
--- a/arch/ia64/include/asm/agp.h
+++ b/arch/ia64/include/asm/agp.h
@@ -17,10 +17,6 @@
 #define unmap_page_from_agp(page)	/* nothing */
 #define flush_agp_cache()		mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/parisc/include/asm/agp.h b/arch/parisc/include/asm/agp.h
index 9651660da63..d226ffa8fc1 100644
--- a/arch/parisc/include/asm/agp.h
+++ b/arch/parisc/include/asm/agp.h
@@ -11,10 +11,6 @@
 #define unmap_page_from_agp(page)	/* nothing */
 #define flush_agp_cache()		mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h
index 86455c4c31e..416e12c2d50 100644
--- a/arch/powerpc/include/asm/agp.h
+++ b/arch/powerpc/include/asm/agp.h
@@ -8,10 +8,6 @@
 #define unmap_page_from_agp(page)
 #define flush_agp_cache() mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h
index c2456870b05..70f52c1661b 100644
--- a/arch/sparc/include/asm/agp.h
+++ b/arch/sparc/include/asm/agp.h
@@ -7,10 +7,6 @@
 #define unmap_page_from_agp(page)
 #define flush_agp_cache() mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/x86/include/asm/agp.h b/arch/x86/include/asm/agp.h
index 9825cd64c9b..eec2a70d437 100644
--- a/arch/x86/include/asm/agp.h
+++ b/arch/x86/include/asm/agp.h
@@ -22,10 +22,6 @@
  */
 #define flush_agp_cache() wbinvd()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
-- 
cgit v1.2.3


From cfc65dd57967f2e0c7b3a8b73e6d12470b1cf1c1 Mon Sep 17 00:00:00 2001
From: Alex Williamson <alex.williamson@hp.com>
Date: Thu, 30 Jul 2009 16:15:18 -0600
Subject: iommu=pt is a valid early param

This avoids a "Malformed early option 'iommu'" warning on boot when
trying to use pass-through mode.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/x86/kernel/pci-dma.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..ae13e34f724 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -212,10 +212,8 @@ static __init int iommu_setup(char *p)
 		if (!strncmp(p, "soft", 4))
 			swiotlb = 1;
 #endif
-		if (!strncmp(p, "pt", 2)) {
+		if (!strncmp(p, "pt", 2))
 			iommu_pass_through = 1;
-			return 1;
-		}
 
 		gart_parse_options(p);
 
-- 
cgit v1.2.3


From af1057abd7d5f97e17ab96e34d1920746188ddcb Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 3 Aug 2009 11:57:20 +0100
Subject: ARM: 5635/1: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation
(x + d/2)/d but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 40755298fa3..16b92c37ec9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -82,7 +82,7 @@ void __init ep93xx_map_io(void)
  */
 static unsigned int last_jiffy_time;
 
-#define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
 
 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
-- 
cgit v1.2.3


From a42548a18866e87092db93b771e6c5b060d78401 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Wed, 29 Jul 2009 12:15:29 +0200
Subject: cputime: Optimize jiffies_to_cputime(1)

For powerpc with CONFIG_VIRT_CPU_ACCOUNTING
jiffies_to_cputime(1) is not compile time constant and run time
calculations are quite expensive. To optimize we use
precomputed value. For all other architectures is is
preprocessor definition.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <1248862529-6063-5-git-send-email-sgruszka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/cputime.h    |  1 +
 arch/powerpc/include/asm/cputime.h | 13 +++++++++++++
 arch/powerpc/kernel/time.c         |  4 ++++
 arch/s390/include/asm/cputime.h    |  1 +
 4 files changed, 19 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
index d20b998cb91..7fa8a859466 100644
--- a/arch/ia64/include/asm/cputime.h
+++ b/arch/ia64/include/asm/cputime.h
@@ -30,6 +30,7 @@ typedef u64 cputime_t;
 typedef u64 cputime64_t;
 
 #define cputime_zero			((cputime_t)0)
+#define cputime_one_jiffy		jiffies_to_cputime(1)
 #define cputime_max			((~((cputime_t)0) >> 1) - 1)
 #define cputime_add(__a, __b)		((__a) +  (__b))
 #define cputime_sub(__a, __b)		((__a) -  (__b))
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
index f42e623030e..fa19f3fe05f 100644
--- a/arch/powerpc/include/asm/cputime.h
+++ b/arch/powerpc/include/asm/cputime.h
@@ -18,6 +18,9 @@
 
 #ifndef CONFIG_VIRT_CPU_ACCOUNTING
 #include <asm-generic/cputime.h>
+#ifdef __KERNEL__
+static inline void setup_cputime_one_jiffy(void) { }
+#endif
 #else
 
 #include <linux/types.h>
@@ -48,6 +51,11 @@ typedef u64 cputime64_t;
 
 #ifdef __KERNEL__
 
+/*
+ * One jiffy in timebase units computed during initialization
+ */
+extern cputime_t cputime_one_jiffy;
+
 /*
  * Convert cputime <-> jiffies
  */
@@ -89,6 +97,11 @@ static inline cputime_t jiffies_to_cputime(const unsigned long jif)
 	return ct;
 }
 
+static inline void setup_cputime_one_jiffy(void)
+{
+	cputime_one_jiffy = jiffies_to_cputime(1);
+}
+
 static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
 {
 	cputime_t ct;
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index eae4511ceea..211d7b0cd37 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -193,6 +193,8 @@ EXPORT_SYMBOL(__cputime_clockt_factor);
 DEFINE_PER_CPU(unsigned long, cputime_last_delta);
 DEFINE_PER_CPU(unsigned long, cputime_scaled_last_delta);
 
+cputime_t cputime_one_jiffy;
+
 static void calc_cputime_factors(void)
 {
 	struct div_result res;
@@ -500,6 +502,7 @@ static int __init iSeries_tb_recal(void)
 				tb_to_xs = divres.result_low;
 				vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
 				vdso_data->tb_to_xs = tb_to_xs;
+				setup_cputime_one_jiffy();
 			}
 			else {
 				printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
@@ -945,6 +948,7 @@ void __init time_init(void)
 	tb_ticks_per_usec = ppc_tb_freq / 1000000;
 	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
 	calc_cputime_factors();
+	setup_cputime_one_jiffy();
 
 	/*
 	 * Calculate the length of each tick in ns.  It will not be
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 7a3817a656d..24b1244aadb 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -42,6 +42,7 @@ __div(unsigned long long n, unsigned int base)
 #endif /* __s390x__ */
 
 #define cputime_zero			(0ULL)
+#define cputime_one_jiffy		jiffies_to_cputime(1)
 #define cputime_max			((~0UL >> 1) - 1)
 #define cputime_add(__a, __b)		((__a) +  (__b))
 #define cputime_sub(__a, __b)		((__a) -  (__b))
-- 
cgit v1.2.3


From ed8d9adf357ec331603fa1049510399812cea7e5 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 3 Aug 2009 14:08:48 +0900
Subject: x86, percpu: Add 'percpu_read_stable()' interface for cacheable
 accesses

This is very useful for some common things like 'get_current()' and
'get_thread_info()', which can be used multiple times in a function, and
where the result is cacheable.

tj: Added the magical undocumented "P" modifier to UP __percpu_arg()
    to force gcc to dereference the pointer value passed in via the
    "p" input constraint.  Without this, percpu_read_stable() returns
    the address of the percpu variable.  Also added comment explaining
    the difference between percpu_read() and percpu_read_stable().

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/current.h     |  2 +-
 arch/x86/include/asm/percpu.h      | 26 +++++++++++++++++++-------
 arch/x86/include/asm/thread_info.h |  2 +-
 3 files changed, 21 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
index c68c361697e..4d447b732d8 100644
--- a/arch/x86/include/asm/current.h
+++ b/arch/x86/include/asm/current.h
@@ -11,7 +11,7 @@ DECLARE_PER_CPU(struct task_struct *, current_task);
 
 static __always_inline struct task_struct *get_current(void)
 {
-	return percpu_read(current_task);
+	return percpu_read_stable(current_task);
 }
 
 #define current get_current()
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 103f1ddb0d8..04eacefcfd2 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -49,7 +49,7 @@
 #define __percpu_arg(x)		"%%"__stringify(__percpu_seg)":%P" #x
 #define __my_cpu_offset		percpu_read(this_cpu_off)
 #else
-#define __percpu_arg(x)		"%" #x
+#define __percpu_arg(x)		"%P" #x
 #endif
 
 /*
@@ -104,36 +104,48 @@ do {							\
 	}						\
 } while (0)
 
-#define percpu_from_op(op, var)				\
+#define percpu_from_op(op, var, constraint)		\
 ({							\
 	typeof(var) ret__;				\
 	switch (sizeof(var)) {				\
 	case 1:						\
 		asm(op "b "__percpu_arg(1)",%0"		\
 		    : "=q" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	case 2:						\
 		asm(op "w "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	case 4:						\
 		asm(op "l "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	case 8:						\
 		asm(op "q "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	default: __bad_percpu_size();			\
 	}						\
 	ret__;						\
 })
 
-#define percpu_read(var)	percpu_from_op("mov", per_cpu__##var)
+/*
+ * percpu_read() makes gcc load the percpu variable every time it is
+ * accessed while percpu_read_stable() allows the value to be cached.
+ * percpu_read_stable() is more efficient and can be used if its value
+ * is guaranteed to be valid across cpus.  The current users include
+ * get_current() and get_thread_info() both of which are actually
+ * per-thread variables implemented as per-cpu variables and thus
+ * stable for the duration of the respective task.
+ */
+#define percpu_read(var)	percpu_from_op("mov", per_cpu__##var,	\
+					       "m" (per_cpu__##var))
+#define percpu_read_stable(var)	percpu_from_op("mov", per_cpu__##var,	\
+					       "p" (&per_cpu__##var))
 #define percpu_write(var, val)	percpu_to_op("mov", per_cpu__##var, val)
 #define percpu_add(var, val)	percpu_to_op("add", per_cpu__##var, val)
 #define percpu_sub(var, val)	percpu_to_op("sub", per_cpu__##var, val)
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index fad7d40b75f..a1bb5a114bf 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -213,7 +213,7 @@ DECLARE_PER_CPU(unsigned long, kernel_stack);
 static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
-	ti = (void *)(percpu_read(kernel_stack) +
+	ti = (void *)(percpu_read_stable(kernel_stack) +
 		      KERNEL_STACK_OFFSET - THREAD_SIZE);
 	return ti;
 }
-- 
cgit v1.2.3


From 3e352aa8ee2bd48f1a19c7742810b3a4a7ba605e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 3 Aug 2009 14:10:11 +0900
Subject: x86, percpu: Fix DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED()

DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED() put percpu variables in
.page_aligned section without adding any alignment restrictions.
Currently, this doesn't cause any problem because all users of the
macros have explicit page alignment and page-sized but it's much safer
to enforce page alignment from the macros.  After all, it's what they
claim to do.

Add __aligned(PAGE_SIZE) to DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED() and
drop explicit alignment from it users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/common.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c07af9..12493c5485e 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1008,8 +1008,7 @@ static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
 };
 
 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
-	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ])
-	__aligned(PAGE_SIZE);
+	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
 
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
-- 
cgit v1.2.3


From bdf977b37418cdf8a2252504779a7e12a09b7575 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 3 Aug 2009 14:12:19 +0900
Subject: x86, percpu: Collect hot percpu variables into one cacheline

On x86_64, percpu variables current_task and kernel_stack are used for
get_current() and current_thread_info() respectively and thus are
often used close to each other.  Move definition of current_task to
kernel/cpu/common.c right above kernel_stack definition and align it
to cacheline so that they always fall into the same cacheline.  Two
percpu variables defined there together - irq_stack_ptr and irq_count
- are also pretty hot and will benefit from sharing the cacheline.

For consistency, current_task definition for x86_32 is also moved to
kernel/cpu/common.c.

Putting current_task and kernel_stack into the same cacheline was
suggested by Linus Torvalds.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/common.c | 15 +++++++++++++--
 arch/x86/kernel/process_32.c |  3 ---
 arch/x86/kernel/process_64.c |  3 ---
 3 files changed, 13 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 12493c5485e..1bd88ed978b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -987,13 +987,21 @@ struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
 		     irq_stack_union) __aligned(PAGE_SIZE);
 
-DEFINE_PER_CPU(char *, irq_stack_ptr) =
-	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
+/*
+ * The following four percpu variables are hot.  Align current_task to
+ * cacheline size such that all four fall in the same cacheline.
+ */
+DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
+	&init_task;
+EXPORT_PER_CPU_SYMBOL(current_task);
 
 DEFINE_PER_CPU(unsigned long, kernel_stack) =
 	(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
 EXPORT_PER_CPU_SYMBOL(kernel_stack);
 
+DEFINE_PER_CPU(char *, irq_stack_ptr) =
+	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
+
 DEFINE_PER_CPU(unsigned int, irq_count) = -1;
 
 /*
@@ -1041,6 +1049,9 @@ DEFINE_PER_CPU(struct orig_ist, orig_ist);
 
 #else	/* CONFIG_X86_64 */
 
+DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
+EXPORT_PER_CPU_SYMBOL(current_task);
+
 #ifdef CONFIG_CC_STACKPROTECTOR
 DEFINE_PER_CPU(unsigned long, stack_canary);
 #endif
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 59f4524984a..daa4107be3b 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -61,9 +61,6 @@
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
-EXPORT_PER_CPU_SYMBOL(current_task);
-
 /*
  * Return saved PC of a blocked thread.
  */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ebefb5407b9..c4c675d5ba1 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -55,9 +55,6 @@
 
 asmlinkage extern void ret_from_fork(void);
 
-DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
-EXPORT_PER_CPU_SYMBOL(current_task);
-
 DEFINE_PER_CPU(unsigned long, old_rsp);
 static DEFINE_PER_CPU(unsigned char, is_idle);
 
-- 
cgit v1.2.3


From 1c1a90d866c5fb029099b9f0f40534e01b7c4d91 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sun, 5 Jul 2009 19:23:30 +0100
Subject: [PATCH] MIPS: Cavium: Move swapped comments to their rightful place.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/c-octeon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index b165cdcb281..10ab69f7183 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -289,7 +289,7 @@ static void  cache_parity_error_octeon(int non_recoverable)
 }
 
 /**
- * Called when the the exception is not recoverable
+ * Called when the the exception is recoverable
  */
 
 asmlinkage void cache_parity_error_octeon_recoverable(void)
@@ -298,7 +298,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void)
 }
 
 /**
- * Called when the the exception is recoverable
+ * Called when the the exception is not recoverable
  */
 
 asmlinkage void cache_parity_error_octeon_non_recoverable(void)
-- 
cgit v1.2.3


From 49316cbf0a9875f102f98dc8b7c80cfa142e33cf Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 6 Jul 2009 09:13:17 +0100
Subject: MIPS: Eleminate filenames from comments

They tend to get not updated when files are moved around or copied and
lack any obvious use.  While at it zap some only too obvious comments and
as per Shinya's suggestion, add a copyright header to extable.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
---
 arch/mips/dec/ecc-berr.c                          | 2 --
 arch/mips/dec/int-handler.S                       | 2 --
 arch/mips/dec/ioasic-irq.c                        | 2 --
 arch/mips/dec/kn01-berr.c                         | 2 --
 arch/mips/dec/kn02-irq.c                          | 2 --
 arch/mips/dec/kn02xa-berr.c                       | 2 --
 arch/mips/dec/prom/call_o32.S                     | 2 --
 arch/mips/dec/prom/console.c                      | 2 --
 arch/mips/dec/time.c                              | 2 --
 arch/mips/emma/common/Makefile                    | 3 ---
 arch/mips/emma/common/prom.c                      | 3 ---
 arch/mips/emma/markeins/Makefile                  | 3 ---
 arch/mips/emma/markeins/irq.c                     | 3 ---
 arch/mips/emma/markeins/led.c                     | 3 ---
 arch/mips/emma/markeins/platform.c                | 3 ---
 arch/mips/emma/markeins/setup.c                   | 3 ---
 arch/mips/fw/lib/call_o32.S                       | 2 --
 arch/mips/include/asm/emma/emma2rh.h              | 3 ---
 arch/mips/include/asm/emma/markeins.h             | 3 ---
 arch/mips/kernel/irq_txx9.c                       | 2 --
 arch/mips/kernel/proc.c                           | 2 --
 arch/mips/kernel/stacktrace.c                     | 2 --
 arch/mips/mm/extable.c                            | 6 +++++-
 arch/mips/pci/fixup-emma2rh.c                     | 3 ---
 arch/mips/pci/fixup-sb1250.c                      | 2 --
 arch/mips/pci/ops-emma2rh.c                       | 3 ---
 arch/mips/pci/pci-emma2rh.c                       | 3 ---
 arch/mips/pci/pci-tx4927.c                        | 2 --
 arch/mips/pci/pci-tx4938.c                        | 2 --
 arch/mips/pci/pci-tx4939.c                        | 2 --
 arch/mips/pmc-sierra/msp71xx/gpio.c               | 2 --
 arch/mips/pmc-sierra/msp71xx/gpio_extended.c      | 2 --
 arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c | 2 --
 arch/mips/sibyte/swarm/swarm-i2c.c                | 2 --
 arch/mips/txx9/generic/mem_tx4927.c               | 2 --
 arch/mips/txx9/generic/setup.c                    | 2 --
 36 files changed, 5 insertions(+), 83 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/dec/ecc-berr.c b/arch/mips/dec/ecc-berr.c
index 6a17c9b508e..7abce661b90 100644
--- a/arch/mips/dec/ecc-berr.c
+++ b/arch/mips/dec/ecc-berr.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/ecc-berr.c
- *
  *	Bus error event handling code for systems equipped with ECC
  *	handling logic, i.e. DECstation/DECsystem 5000/200 (KN02),
  *	5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 00cecdcc75f..82c85281878 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -1,6 +1,4 @@
 /*
- * arch/mips/dec/int-handler.S
- *
  * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen
  * Copyright (C) 2000, 2001, 2002, 2003, 2005  Maciej W. Rozycki
  *
diff --git a/arch/mips/dec/ioasic-irq.c b/arch/mips/dec/ioasic-irq.c
index 3acb133668d..cb41954fc32 100644
--- a/arch/mips/dec/ioasic-irq.c
+++ b/arch/mips/dec/ioasic-irq.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/ioasic-irq.c
- *
  *	DEC I/O ASIC interrupts.
  *
  *	Copyright (c) 2002, 2003  Maciej W. Rozycki
diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c
index d3b8002bf1e..b0dc6d53edd 100644
--- a/arch/mips/dec/kn01-berr.c
+++ b/arch/mips/dec/kn01-berr.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/kn01-berr.c
- *
  *	Bus error event handling code for DECstation/DECsystem 3100
  *	and 2100 (KN01) systems equipped with parity error detection
  *	logic.
diff --git a/arch/mips/dec/kn02-irq.c b/arch/mips/dec/kn02-irq.c
index 02439dc0ba8..ed90a8deabc 100644
--- a/arch/mips/dec/kn02-irq.c
+++ b/arch/mips/dec/kn02-irq.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/kn02-irq.c
- *
  *	DECstation 5000/200 (KN02) Control and Status Register
  *	interrupts.
  *
diff --git a/arch/mips/dec/kn02xa-berr.c b/arch/mips/dec/kn02xa-berr.c
index 5f04545c360..07ca5405d48 100644
--- a/arch/mips/dec/kn02xa-berr.c
+++ b/arch/mips/dec/kn02xa-berr.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/mips/dec/kn02xa-berr.c
- *
  *	Bus error event handling code for 5000-series systems equipped
  *	with parity error detection logic, i.e. DECstation/DECsystem
  *	5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
diff --git a/arch/mips/dec/prom/call_o32.S b/arch/mips/dec/prom/call_o32.S
index e523454bda3..8c8498159e4 100644
--- a/arch/mips/dec/prom/call_o32.S
+++ b/arch/mips/dec/prom/call_o32.S
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/dec/prom/call_o32.S
- *
  *	O32 interface for the 64 (or N32) ABI.
  *
  *	Copyright (C) 2002  Maciej W. Rozycki
diff --git a/arch/mips/dec/prom/console.c b/arch/mips/dec/prom/console.c
index 078e1a12421..caa6e047caf 100644
--- a/arch/mips/dec/prom/console.c
+++ b/arch/mips/dec/prom/console.c
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/dec/prom/console.c
- *
  *	DECstation PROM-based early console support.
  *
  *	Copyright (C) 2004, 2007  Maciej W. Rozycki
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 1359c03ded5..463136e6685 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/mips/dec/time.c
- *
  *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
  *  Copyright (C) 2000, 2003  Maciej W. Rozycki
  *
diff --git a/arch/mips/emma/common/Makefile b/arch/mips/emma/common/Makefile
index c392d28c1ef..f27d84d1904 100644
--- a/arch/mips/emma/common/Makefile
+++ b/arch/mips/emma/common/Makefile
@@ -1,7 +1,4 @@
 #
-#  arch/mips/emma2rh/common/Makefile
-#       Makefile for the common code of NEC EMMA2RH based board.
-#
 #  Copyright (C) NEC Electronics Corporation 2005-2006
 #
 #  This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/common/prom.c b/arch/mips/emma/common/prom.c
index 120f53fbdb4..708f0876140 100644
--- a/arch/mips/emma/common/prom.c
+++ b/arch/mips/emma/common/prom.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/common/prom.c
- *      This file is prom file.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/common/prom.c
diff --git a/arch/mips/emma/markeins/Makefile b/arch/mips/emma/markeins/Makefile
index 16e0017ba91..f8ba2508fa2 100644
--- a/arch/mips/emma/markeins/Makefile
+++ b/arch/mips/emma/markeins/Makefile
@@ -1,7 +1,4 @@
 #
-#  arch/mips/emma2rh/markeins/Makefile
-#       Makefile for the common code of NEC EMMA2RH based board.
-#
 #  Copyright (C) NEC Electronics Corporation 2005-2006
 #
 #  This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index 43828ae796e..9504b7ee0b7 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/irq.c
- *      This file defines the irq handler for EMMA2RH.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
diff --git a/arch/mips/emma/markeins/led.c b/arch/mips/emma/markeins/led.c
index 377a181b656..49755896857 100644
--- a/arch/mips/emma/markeins/led.c
+++ b/arch/mips/emma/markeins/led.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/led.c
- *      This file defines the led display for Mark-eins.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/mips/emma/markeins/platform.c b/arch/mips/emma/markeins/platform.c
index 80ae12ef87d..b05b08b92a3 100644
--- a/arch/mips/emma/markeins/platform.c
+++ b/arch/mips/emma/markeins/platform.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/platofrm.c
- *      This file sets up platform devices for EMMA2RH Mark-eins.
- *
  *  Copyright(C) MontaVista Software Inc, 2006
  *
  *  Author: dmitry pervushin <dpervushin@ru.mvista.com>
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
index 67f45650008..335dc8c1a1b 100644
--- a/arch/mips/emma/markeins/setup.c
+++ b/arch/mips/emma/markeins/setup.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/emma2rh/markeins/setup.c
- *      This file is setup for EMMA2RH Mark-eins.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/setup.c.
diff --git a/arch/mips/fw/lib/call_o32.S b/arch/mips/fw/lib/call_o32.S
index bdf7d1d4081..e0a68713b3c 100644
--- a/arch/mips/fw/lib/call_o32.S
+++ b/arch/mips/fw/lib/call_o32.S
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/dec/prom/call_o32.S
- *
  *	O32 interface for the 64 (or N32) ABI.
  *
  *	Copyright (C) 2002  Maciej W. Rozycki
diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h
index 30aea91de62..2afb2fe11b3 100644
--- a/arch/mips/include/asm/emma/emma2rh.h
+++ b/arch/mips/include/asm/emma/emma2rh.h
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/include/asm/emma/emma2rh.h
- *      This file is EMMA2RH common header.
- *
  *  Copyright (C) NEC Electronics Corporation 2005-2006
  *
  *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h
index 973b0628490..2618bf23024 100644
--- a/arch/mips/include/asm/emma/markeins.h
+++ b/arch/mips/include/asm/emma/markeins.h
@@ -1,7 +1,4 @@
 /*
- *  include/asm-mips/emma2rh/markeins.h
- *      This file is EMMA2RH board depended header.
- *
  *  Copyright (C) NEC Electronics Corporation 2005-2006
  *
  *  This file based on include/asm-mips/ddb5xxx/ddb5xxx.h
diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c
index a4d1462c27f..9b78029bea7 100644
--- a/arch/mips/kernel/irq_txx9.c
+++ b/arch/mips/kernel/irq_txx9.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/kernel/irq_txx9.c
- *
  * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c,
  *          linux/arch/mips/tx4927/common/tx4927_irq.c,
  *          linux/arch/mips/tx4938/common/irq.c
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index e0a4ac18fa0..26109c4d517 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/mips/kernel/proc.c
- *
  *  Copyright (C) 1995, 1996, 2001  Ralf Baechle
  *  Copyright (C) 2001, 2004  MIPS Technologies, Inc.
  *  Copyright (C) 2004  Maciej W. Rozycki
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 58f5cd76c8c..d52ff77baf3 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -1,6 +1,4 @@
 /*
- * arch/mips/kernel/stacktrace.c
- *
  * Stack trace management functions
  *
  *  Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
diff --git a/arch/mips/mm/extable.c b/arch/mips/mm/extable.c
index 297fb9f390d..9d25d2ba4b9 100644
--- a/arch/mips/mm/extable.c
+++ b/arch/mips/mm/extable.c
@@ -1,5 +1,9 @@
 /*
- * linux/arch/mips/mm/extable.c
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997, 99, 2001 - 2004 Ralf Baechle <ralf@linux-mips.org>
  */
 #include <linux/module.h>
 #include <linux/spinlock.h>
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
index fba5aad00d5..0d9ccf4dfc5 100644
--- a/arch/mips/pci/fixup-emma2rh.c
+++ b/arch/mips/pci/fixup-emma2rh.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/pci/fixup-emma2rh.c
- *      This file defines the PCI configration.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c
index 0ad39e53f7b..f0bb9146e6c 100644
--- a/arch/mips/pci/fixup-sb1250.c
+++ b/arch/mips/pci/fixup-sb1250.c
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/pci/fixup-sb1250.c
- *
  *	Copyright (C) 2004, 2006  MIPS Technologies, Inc.  All rights reserved.
  *	    Author:	Maciej W. Rozycki <macro@mips.com>
  *
diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c
index 5947a70b0b7..710aef5c070 100644
--- a/arch/mips/pci/ops-emma2rh.c
+++ b/arch/mips/pci/ops-emma2rh.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/pci/ops-emma2rh.c
- *      This file defines the PCI operation for EMMA2RH.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/pci/ops-vr41xx.c
diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c
index 2df4190232c..773e34ff4d1 100644
--- a/arch/mips/pci/pci-emma2rh.c
+++ b/arch/mips/pci/pci-emma2rh.c
@@ -1,7 +1,4 @@
 /*
- *  arch/mips/pci/pci-emma2rh.c
- *      This file defines the PCI configration.
- *
  *  Copyright (C) NEC Electronics Corporation 2004-2006
  *
  *  This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
index aaa90059679..a5807406a7f 100644
--- a/arch/mips/pci/pci-tx4927.c
+++ b/arch/mips/pci/pci-tx4927.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/pci/pci-tx4927.c
- *
  * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
index 1ea257bc3b8..20e45f30b2e 100644
--- a/arch/mips/pci/pci-tx4938.c
+++ b/arch/mips/pci/pci-tx4938.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/pci/pci-tx4938.c
- *
  * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
diff --git a/arch/mips/pci/pci-tx4939.c b/arch/mips/pci/pci-tx4939.c
index 5fecf1cdc32..9ef840693ba 100644
--- a/arch/mips/pci/pci-tx4939.c
+++ b/arch/mips/pci/pci-tx4939.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/pci/pci-tx4939.c
- *
  * Based on linux/arch/mips/txx9/rbtx4939/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio.c b/arch/mips/pmc-sierra/msp71xx/gpio.c
index 69848c5813e..aaccbe52438 100644
--- a/arch/mips/pmc-sierra/msp71xx/gpio.c
+++ b/arch/mips/pmc-sierra/msp71xx/gpio.c
@@ -1,6 +1,4 @@
 /*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio.c
- *
  * Generic PMC MSP71xx GPIO handling. These base gpio are controlled by two
  * types of registers. The data register sets the output level when in output
  * mode and when in input mode will contain the value at the input. The config
diff --git a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
index fc6dbc6cf1c..2a99f360fae 100644
--- a/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
+++ b/arch/mips/pmc-sierra/msp71xx/gpio_extended.c
@@ -1,6 +1,4 @@
 /*
- * @file /arch/mips/pmc-sierra/msp71xx/gpio_extended.c
- *
  * Generic PMC MSP71xx EXTENDED (EXD) GPIO handling. The extended gpio is
  * a set of hardware registers that have no need for explicit locking as
  * it is handled by unique method of writing individual set/clr bits.
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index caf5e9a0acc..fc990cb3194 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -1,6 +1,4 @@
 /*
- *  arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
- *
  *  Copyright (C) 2003 PMC-Sierra Inc.
  *  Author: Manish Lachwani (lachwani@pmc-sierra.com)
  *
diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c
index 4282ac9d01d..062505054d4 100644
--- a/arch/mips/sibyte/swarm/swarm-i2c.c
+++ b/arch/mips/sibyte/swarm/swarm-i2c.c
@@ -1,6 +1,4 @@
 /*
- *	arch/mips/sibyte/swarm/swarm-i2c.c
- *
  *	Broadcom BCM91250A (SWARM), etc. I2C platform setup.
  *
  *	Copyright (c) 2008  Maciej W. Rozycki
diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c
index ef6ea6e9787..70f9626f822 100644
--- a/arch/mips/txx9/generic/mem_tx4927.c
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/txx9/generic/mem_tx4927.c
- *
  * common tx4927 memory interface
  *
  * Author: MontaVista Software, Inc.
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 3b7d77d61ce..a205e2ba8e7 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/mips/txx9/generic/setup.c
- *
  * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
  *	    and RBTX49xx patch from CELF patch archive.
  *
-- 
cgit v1.2.3


From a887b4dada2f23b2ff2aa725e0509c92dc652597 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 4 Jul 2009 01:33:09 +0900
Subject: MIPS: Drop mmap_sem in pagefault oom path

Fix the pagefault oom path which does not drop mm->mmap_sem.
This was introduced by commit c7c1e3846bac1e4b8a8941f6a194812e28b0a519

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/fault.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 6751ce9ede9..f956ecbb813 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -171,6 +171,7 @@ out_of_memory:
 	 * We ran out of memory, call the OOM killer, and return the userspace
 	 * (which will retry the fault, or kill us if we got oom-killed).
 	 */
+	up_read(&mm->mmap_sem);
 	pagefault_out_of_memory();
 	return;
 
-- 
cgit v1.2.3


From 7d35cdc07dd26eb6667f66f8e2f43f833a926ecf Mon Sep 17 00:00:00 2001
From: Alexander Clouter <alex@digriz.org.uk>
Date: Sun, 5 Jul 2009 12:00:55 +0100
Subject: MIPS: Fix compile for !CONFIG_SMP

Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks compiling MIPS
with SMP disabled.  This patch fixes that.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/gic.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 10292e37c1f..a8f57341f12 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -20,7 +20,7 @@
 #define GIC_TRIG_EDGE			1
 #define GIC_TRIG_LEVEL			0
 
-#if CONFIG_SMP
+#ifdef CONFIG_SMP
 #define GIC_NUM_INTRS			(24 + NR_CPUS * 2)
 #else
 #define GIC_NUM_INTRS			32
-- 
cgit v1.2.3


From 78fe01a5a80da4621321a1dc199c3a0875e2fbb0 Mon Sep 17 00:00:00 2001
From: Yoichi Yuasa <yuasa@linux-mips.org>
Date: Wed, 8 Jul 2009 15:08:19 +0900
Subject: MIPS: MIPSsim: Fix unbalance brace in mipssim get_c0_compare_int()

cc1: warnings being treated as errors
arch/mips/mipssim/sim_time.c: In function 'get_c0_compare_int':
arch/mips/mipssim/sim_time.c:103: warning: ISO C90 forbids mixed declarations and code
arch/mips/mipssim/sim_time.c:116: error: expected declaration or statement at end of input
make[1]: *** [arch/mips/mipssim/sim_time.o] Error 1

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mipssim/sim_time.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index 0cea932f124..5492c42f765 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -89,13 +89,13 @@ unsigned __cpuinit get_c0_compare_int(void)
 	if (cpu_has_veic) {
 		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
 		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
-	} else {
-#endif
-	       {
-		if (cpu_has_vint)
-			set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
-		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+		return mips_cpu_timer_irq;
 	}
+#endif
+	if (cpu_has_vint)
+		set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+	mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
 
 	return mips_cpu_timer_irq;
 }
-- 
cgit v1.2.3


From 1de010a2702eb21d90883b83bf8c737d5e69d234 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Thu, 9 Jul 2009 06:14:37 +0800
Subject: MIPS: AR7: Remove unused inclusions of <linux/version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/platform.c | 1 -
 arch/mips/ar7/setup.c    | 1 -
 2 files changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 54224496178..c4d71fb18de 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -28,7 +28,6 @@
 #include <linux/serial_8250.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
-#include <linux/version.h>
 #include <linux/vlynq.h>
 #include <linux/leds.h>
 #include <linux/string.h>
diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c
index 6ebb5f16d96..39f6b5b9646 100644
--- a/arch/mips/ar7/setup.c
+++ b/arch/mips/ar7/setup.c
@@ -15,7 +15,6 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  */
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/pm.h>
-- 
cgit v1.2.3


From 484889fc85a223ef56edc31828b86751b2296b7c Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Wed, 8 Jul 2009 10:07:50 -0700
Subject: MIPS: Avoid clobbering struct pt_regs in kthreads

The resume() implementation octeon_switch.S examines the saved cp0_status
register.  We were clobbering the entire pt_regs structure in kernel
threads leading to random crashes.

When switching away from a kernel thread, the saved cp0_status is examined
and if bit 30 is set it is cleared and the CP2 state saved into the pt_regs
structure.  Since the kernel thread stack overlaid the pt_regs structure
this resulted in a corrupt stack.  When the kthread with the corrupt stack
was resumed, it could crash if it used any of the data in the stack that was
clobbered.

We fix it by moving the kernel thread stack down so it doesn't overlay
pt_regs.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/processor.h | 5 +++--
 arch/mips/kernel/head.S           | 3 ++-
 arch/mips/kernel/process.c        | 4 +++-
 3 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 0f926aa0cb4..087a8884ef0 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -311,8 +311,9 @@ extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long
 
 unsigned long get_wchan(struct task_struct *p);
 
-#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + THREAD_SIZE - 32)
-#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk) - 1)
+#define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \
+			 THREAD_SIZE - 32 - sizeof(struct pt_regs))
+#define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk))
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc)
 #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29])
 #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status)
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 492a0a8d70f..531ce7b1612 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -188,7 +188,8 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 
 	MTC0		zero, CP0_CONTEXT	# clear context register
 	PTR_LA		$28, init_thread_union
-	PTR_LI		sp, _THREAD_SIZE - 32
+	/* Set the SP after an empty pt_regs.  */
+	PTR_LI		sp, _THREAD_SIZE - 32 - PT_SIZE
 	PTR_ADDU	sp, $28
 	set_saved_sp	sp, t0, t1
 	PTR_SUBU	sp, 4 * SZREG		# init stack pointer
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c09d681b718..f3d73e1831c 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -115,7 +115,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs;
-	long childksp;
+	unsigned long childksp;
 	p->set_child_tid = p->clear_child_tid = NULL;
 
 	childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
@@ -132,6 +132,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 
 	/* set up new TSS. */
 	childregs = (struct pt_regs *) childksp - 1;
+	/*  Put the stack after the struct pt_regs.  */
+	childksp = (unsigned long) childregs;
 	*childregs = *regs;
 	childregs->regs[7] = 0;	/* Clear error flag */
 
-- 
cgit v1.2.3


From 008ee96f1204225503934cb57ac38c49f519c7ab Mon Sep 17 00:00:00 2001
From: Raghu Gandham <raghu@mips.com>
Date: Wed, 8 Jul 2009 17:00:44 -0700
Subject: [PATCH] MIPS: SMTC: Fix compile error

Commit fc03bc1715ca0ad4ccfe97aab16bcc9e7129c1a4 breaks when SMTC support
is enabled on Malta.

Signed-off-by: Raghu Gandham <raghu@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mti-malta/malta-int.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index a8756f82c31..3e0a9b35ba5 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -331,6 +331,7 @@ static struct irqaction irq_call = {
 	.flags		= IRQF_DISABLED|IRQF_PERCPU,
 	.name		= "IPI_call"
 };
+#endif /* CONFIG_MIPS_MT_SMP */
 
 static int gic_resched_int_base;
 static int gic_call_int_base;
@@ -346,7 +347,6 @@ unsigned int plat_ipi_resched_int_xlate(unsigned int cpu)
 {
 	return GIC_RESCHED_INT(cpu);
 }
-#endif /* CONFIG_MIPS_MT_SMP */
 
 static struct irqaction i8259irq = {
 	.handler = no_action,
-- 
cgit v1.2.3


From d8e5f9fe5dab0e07985f2456cb6cc57788f53131 Mon Sep 17 00:00:00 2001
From: Kurt Martin <kurt@mips.com>
Date: Wed, 8 Jul 2009 19:22:35 -0700
Subject: MIPS: SMTC: Move cross VPE writes to after a TC is assigned to VPE.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Raghu Gandham <raghu@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/smtc.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 8a0626cbb10..c16bb6d6c25 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -465,11 +465,8 @@ void smtc_prepare_cpus(int cpus)
 	smtc_configure_tlb();
 
 	for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
-		/*
-		 * Set the MVP bits.
-		 */
-		settc(tc);
-		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP);
+		if (tcpervpe[vpe] == 0)
+			continue;
 		if (vpe != 0)
 			printk(", ");
 		printk("VPE %d: TC", vpe);
@@ -487,6 +484,12 @@ void smtc_prepare_cpus(int cpus)
 			tc++;
 		}
 		if (vpe != 0) {
+			/*
+			 * Allow this VPE to control others.
+			 */
+			write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
+					      VPECONF0_MVP);
+
 			/*
 			 * Clear any stale software interrupts from VPE's Cause
 			 */
-- 
cgit v1.2.3


From 0e66fff883ef1b6e4c5031e8add8827cd0e2a195 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Mon, 13 Jul 2009 11:14:24 +0200
Subject: MIPS: Fix loading of modules with unresolved weak symbols

Loading of modules with unresolved weak symbols fails on MIPS
since '88173507e4fc1e7ecd111b0565e8cba0cb7dae6d'.

Modules: handle symbols that have a zero value

The module subsystem cannot handle symbols that are zero.  If symbols
are present that have a zero value then the module resolver prints out a
message that these symbols are unresolved.

We have to use IS_ERR_VALUE() to check that a symbol has been resolved
or not.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/module.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 3e9100dcc12..e465851a616 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -301,7 +301,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 		/* This is the symbol it is referring to */
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
-		if (!sym->st_value) {
+		if (IS_ERR_VALUE(sym->st_value)) {
 			/* Ignore unresolved weak symbol */
 			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
 				continue;
@@ -341,7 +341,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		/* This is the symbol it is referring to */
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
-		if (!sym->st_value) {
+		if (IS_ERR_VALUE(sym->st_value)) {
 			/* Ignore unresolved weak symbol */
 			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
 				continue;
-- 
cgit v1.2.3


From 4824f20c8b3adcbc5067c1bdd88408ee68da6bb2 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Mon, 27 Apr 2009 16:59:48 +0200
Subject: MIPS: MSP71xx: fix build failures on msp_irq_slp.c

Trying to build MSP4200 VoIP defconfig also fails on msp_irq_slp.c with a
non-existing reference to mask_slp_irq, which is in turn mask_msp_slp_irq.
Passed that, we will also miss a comma when calling
set_irq_chip_and_handler. This patch fixes both issues.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
index f5f1b8d2bb9..66f6f8505e7 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
@@ -45,7 +45,7 @@ static inline void mask_msp_slp_irq(unsigned int irq)
  */
 static inline void ack_msp_slp_irq(unsigned int irq)
 {
-	mask_slp_irq(irq);
+	mask_msp_slp_irq(irq);
 
 	/*
 	 * only really necessary for 18, 16-14 and sometimes 3:0 (since
@@ -79,7 +79,7 @@ void __init msp_slp_irq_init(void)
 
 	/* initialize all the IRQ descriptors */
 	for (i = MSP_SLP_INTBASE; i < MSP_PER_INTBASE + 32; i++)
-		set_irq_chip_and_handler(i, &msp_slp_irq_controller
+		set_irq_chip_and_handler(i, &msp_slp_irq_controller,
 					 handle_level_irq);
 }
 
-- 
cgit v1.2.3


From 6577890fd68c2671850214663dd9ae97feacbc47 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Mon, 27 Apr 2009 16:47:23 +0200
Subject: MIPS: MSPxxxx: define MIPS34K_MISSED_ITLB_WAR for other PMC-Sierra
 SoC

Trying to build a PMC-Sierra MSP4200 VoIP gateway defconfig will not work
since MIPS34K_MISSED_ITLB_WAR is not defined for all boards supported
within pmc-serria/msp71xx. This patch defines MIPS34K_MISSED_ITLB_WAR to
prevent such build failures:

  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-mips
  CC      arch/mips/kernel/asm-offsets.s
In file included fromlinux-msp71xx/linux-2.6.29/arch/mips/include/asm/bitops.h:24,
                 from include/linux/bitops.h:17,
                 from include/linux/kernel.h:15,
                 from include/linux/sched.h:52,
                 from arch/mips/kernel/asm-offsets.c:13:
linux-msp71xx/linux-2.6.29/arch/mips/include/asm/war.h:241:2: error: #error Check setting of MIPS34K_MISSED_ITLB_WAR for your
platform

This fixes a compile error when building for the MSP4200 boards.  Identical
patches to fix this were send by

  Florian Fainelli <florian@openwrt.org>
  Shane McDonald <mcdonald.shane@gmail.com>

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/pmc-sierra/msp71xx/war.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
index 0bf48fc1892..9e2ee429c52 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/war.h
@@ -23,6 +23,8 @@
 #if defined(CONFIG_PMC_MSP7120_EVAL) || defined(CONFIG_PMC_MSP7120_GW) || \
 	defined(CONFIG_PMC_MSP7120_FPGA)
 #define MIPS34K_MISSED_ITLB_WAR         1
+#else
+#define MIPS34K_MISSED_ITLB_WAR         0
 #endif
 
 #endif /* __ASM_MIPS_PMC_SIERRA_WAR_H */
-- 
cgit v1.2.3


From 0ca71737fee65521ede964afbd2d5484976ed0ed Mon Sep 17 00:00:00 2001
From: Shane McDonald <mcdonald.shane@gmail.com>
Date: Sun, 12 Jul 2009 10:42:06 -0600
Subject: MIPS: Simplify and correct interrupt handling for MSP4200

The current interrupt handling code for the MSP4200 always masks an
interrupt before acknowledging it.  This is not required, as that will be
handled by the level interrupt handler.  This change simplifies the MSP4200
code to remove the masking in the ack routine, and makes sure that the
minimum required operation is performed for masking and acking, rather
than always both masking and acking the interrupt.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
index 66f6f8505e7..61f39023234 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_slp.c
@@ -45,13 +45,6 @@ static inline void mask_msp_slp_irq(unsigned int irq)
  */
 static inline void ack_msp_slp_irq(unsigned int irq)
 {
-	mask_msp_slp_irq(irq);
-
-	/*
-	 * only really necessary for 18, 16-14 and sometimes 3:0 (since
-	 * these can be edge sensitive) but it doesn't hurt  for the others.
-	 */
-
 	/* check for PER interrupt range */
 	if (irq < MSP_PER_INTBASE)
 		*SLP_INT_STS_REG = (1 << (irq - MSP_SLP_INTBASE));
@@ -62,8 +55,7 @@ static inline void ack_msp_slp_irq(unsigned int irq)
 static struct irq_chip msp_slp_irq_controller = {
 	.name = "MSP_SLP",
 	.ack = ack_msp_slp_irq,
-	.mask = ack_msp_slp_irq,
-	.mask_ack = ack_msp_slp_irq,
+	.mask = mask_msp_slp_irq,
 	.unmask = unmask_msp_slp_irq,
 };
 
-- 
cgit v1.2.3


From 3e6e92183118d26d856e8efb549987164d1b49b4 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Wed, 15 Jul 2009 22:03:56 +0900
Subject: MIPS: RBTX4939: Fix IOC pin-enable register updating

The rbtx4939_update_ioc_pen() expects txx9_ce_res[] already initialized.
Call it after tx4939_setup().

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/rbtx4939/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index c033ffe71cd..b0c241ecf60 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -512,10 +512,10 @@ static void __init rbtx4939_setup(void)
 	rbtx4939_ebusc_setup();
 	/* always enable ATA0 */
 	txx9_set64(&tx4939_ccfgptr->pcfg, TX4939_PCFG_ATA0MODE);
-	rbtx4939_update_ioc_pen();
 	if (txx9_master_clock == 0)
 		txx9_master_clock = 20000000;
 	tx4939_setup();
+	rbtx4939_update_ioc_pen();
 #ifdef HAVE_RBTX4939_IOSWAB
 	ioswabw = rbtx4939_ioswabw;
 	__mem_ioswabw = rbtx4939_mem_ioswabw;
-- 
cgit v1.2.3


From 838c05705ef8c110037a713526bb18762db0a241 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Tue, 14 Jul 2009 18:16:50 -0700
Subject: MIPS: Octeon PCIe: Make hardware and software bus numbers match.

Some SiliconImage PCIe SATA controlers are not detected when the bus
numbers differ.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pci/pcie-octeon.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 75262247f3e..6aa5c542d52 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -1040,19 +1040,29 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
 	int bus_number = bus->number;
 
 	/*
-	 * We need to force the bus number to be zero on the root
-	 * bus. Linux numbers the 2nd root bus to start after all
-	 * buses on root 0.
+	 * For the top level bus make sure our hardware bus number
+	 * matches the software one.
 	 */
-	if (bus->parent == NULL)
-		bus_number = 0;
+	if (bus->parent == NULL) {
+		union cvmx_pciercx_cfg006 pciercx_cfg006;
+		pciercx_cfg006.u32 = cvmx_pcie_cfgx_read(pcie_port,
+			CVMX_PCIERCX_CFG006(pcie_port));
+		if (pciercx_cfg006.s.pbnum != bus_number) {
+			pciercx_cfg006.s.pbnum = bus_number;
+			pciercx_cfg006.s.sbnum = bus_number;
+			pciercx_cfg006.s.subbnum = bus_number;
+			cvmx_pcie_cfgx_write(pcie_port,
+				CVMX_PCIERCX_CFG006(pcie_port),
+				pciercx_cfg006.u32);
+		}
+	}
 
 	/*
 	 * PCIe only has a single device connected to Octeon. It is
 	 * always device ID 0. Don't bother doing reads for other
 	 * device IDs on the first segment.
 	 */
-	if ((bus_number == 0) && (devfn >> 3 != 0))
+	if ((bus->parent == NULL) && (devfn >> 3 != 0))
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
 
 	/*
@@ -1070,7 +1080,7 @@ static inline int octeon_pcie_read_config(int pcie_port, struct pci_bus *bus,
 		 * bridge only respondes to device ID 0, function
 		 * 0-1
 		 */
-		if ((bus_number == 0) && (devfn >= 2))
+		if ((bus->parent == NULL) && (devfn >= 2))
 			return PCIBIOS_FUNC_NOT_SUPPORTED;
 		/*
 		 * The PCI-X slots are device ID 2,3. Choose one of
@@ -1167,13 +1177,6 @@ static inline int octeon_pcie_write_config(int pcie_port, struct pci_bus *bus,
 					   int size, u32 val)
 {
 	int bus_number = bus->number;
-	/*
-	 * We need to force the bus number to be zero on the root
-	 * bus. Linux numbers the 2nd root bus to start after all
-	 * busses on root 0.
-	 */
-	if (bus->parent == NULL)
-		bus_number = 0;
 
 	switch (size) {
 	case 4:
-- 
cgit v1.2.3


From dd34b5a82feadfaee4f8dea83a694d9349f94a28 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 21 Jul 2009 12:38:10 +0200
Subject: MIPS: AR7: Fix build warning on memory.c

This patch fixes the following build warning:
arch/mips/ar7/memory.c: In function 'memsize':
arch/mips/ar7/memory.c:55: warning: passing argument 1 of 'writel' makes integer from pointer without a cast

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/memory.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c
index 46fed44825a..696c723dc6d 100644
--- a/arch/mips/ar7/memory.c
+++ b/arch/mips/ar7/memory.c
@@ -52,7 +52,7 @@ static int __init memsize(void)
 		size <<= 1;
 	} while (size < (64 << 20));
 
-	writel(tmpaddr, &addr);
+	writel((u32)tmpaddr, &addr);
 
 	return size;
 }
-- 
cgit v1.2.3


From ea85a0e4cc870d2bb92e3b2007007901209bb7de Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Wed, 29 Jul 2009 22:02:53 +0200
Subject: MIPS: Fix read buffer overflow

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/prom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
index a320bceb2f9..5ad6f1db656 100644
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -144,7 +144,7 @@ static char * __init lookup_psp_var_map(u8 num)
 {
 	int i;
 
-	for (i = 0; i < sizeof(psp_var_map); i++)
+	for (i = 0; i < ARRAY_SIZE(psp_var_map); i++)
 		if (psp_var_map[i].num == num)
 			return psp_var_map[i].value;
 
-- 
cgit v1.2.3


From 50ca961912be315035cb0f3508e35c974851da2a Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 24 Jul 2009 13:24:15 +0200
Subject: MIPS: AR7: Fix build failures when CONFIG_SERIAL_8250 is not enabled

This patch fixes the following build failure when CONFIG_SERIAL_8250
is not enabled in the kernel configuration:
arch/mips/ar7/built-in.o: In function 'ar7_register_devices':
platform.c:(.init.text+0x61c): undefined reference to 'early_serial_setup'
platform.c:(.init.text+0x61c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup'
platform.c:(.init.text+0x68c): undefined reference to 'early_serial_setup'
platform.c:(.init.text+0x68c): relocation truncated to fit: R_MIPS_26 against 'early_serial_setup'

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/platform.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index c4d71fb18de..8ef8266e47f 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -480,6 +480,7 @@ static void __init detect_leds(void)
 static int __init ar7_register_devices(void)
 {
 	int res;
+#ifdef CONFIG_SERIAL_8250
 	static struct uart_port uart_port[2];
 
 	memset(uart_port, 0, sizeof(struct uart_port) * 2);
@@ -511,7 +512,7 @@ static int __init ar7_register_devices(void)
 		if (res)
 			return res;
 	}
-
+#endif /* CONFIG_SERIAL_8250 */
 	res = platform_device_register(&physmap_flash);
 	if (res)
 		return res;
-- 
cgit v1.2.3


From 8e84c1480d2e7d98d487b567100717b9cc9dcfd7 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 24 Jul 2009 13:18:16 +0200
Subject: MIPS: AR7: Use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/platform.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 8ef8266e47f..2ecab615593 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -242,13 +242,13 @@ static struct platform_device physmap_flash = {
 	.num_resources = 1,
 };
 
-static u64 cpmac_dma_mask = DMA_32BIT_MASK;
+static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
 static struct platform_device cpmac_low = {
 	.id = 0,
 	.name = "cpmac",
 	.dev = {
 		.dma_mask = &cpmac_dma_mask,
-		.coherent_dma_mask = DMA_32BIT_MASK,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &cpmac_low_data,
 	},
 	.resource = cpmac_low_res,
@@ -260,7 +260,7 @@ static struct platform_device cpmac_high = {
 	.name = "cpmac",
 	.dev = {
 		.dma_mask = &cpmac_dma_mask,
-		.coherent_dma_mask = DMA_32BIT_MASK,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 		.platform_data = &cpmac_high_data,
 	},
 	.resource = cpmac_high_res,
-- 
cgit v1.2.3


From e5b3837a52c7fe5c7086590bed902f0fac5f9ec0 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 24 Jul 2009 13:18:42 +0200
Subject: MIPS: AR7: Remove unused tnetd7200_get_clock function

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/clock.c | 13 -------------
 1 file changed, 13 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
index 27dc6663f2f..cc65c8eb391 100644
--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@@ -264,19 +264,6 @@ static void __init tnetd7300_init_clocks(void)
 	iounmap(bootcr);
 }
 
-static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock,
-	u32 *bootcr, u32 bus_clock)
-{
-	int divisor = ((readl(&clock->prediv) & 0x1f) + 1) *
-		((readl(&clock->postdiv) & 0x1f) + 1);
-
-	if (*bootcr & BOOT_PLL_BYPASS)
-		return base / divisor;
-
-	return base * ((readl(&clock->mul) & 0xf) + 1) / divisor;
-}
-
-
 static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock,
 	int prediv, int postdiv, int postdiv2, int mul, u32 frequency)
 {
-- 
cgit v1.2.3


From 619e22632ea3110323b1851a7fecb52bf8505fd2 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 24 Jul 2009 13:19:10 +0200
Subject: MIPS: AR7: Override CFLAGS with -Werror

Now that we have removed all warnings from the ar7 board code we can use
-Werror like on other MIPS boards.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
index 7435e44b396..26bc5da1899 100644
--- a/arch/mips/ar7/Makefile
+++ b/arch/mips/ar7/Makefile
@@ -8,3 +8,4 @@ obj-y := \
 	platform.o \
 	gpio.o \
 	clock.o
+EXTRA_CFLAGS += -Werror
-- 
cgit v1.2.3


From a1b021d3992d9be03b0abec1a7ed78e713b94206 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Sat, 1 Aug 2009 23:51:20 +0200
Subject: MIPS: MTX-1: Request button GPIO before setting its direction

This patch fixes the following warning at boot time:
WARNING: at drivers/gpio/gpiolib.c:83 0x8021d5e0()
autorequest GPIO-207
Modules linked in:
Call Trace:[<8011e0ec>] 0x8011e0ec
[<80110a28>] 0x80110a28
[<80110a28>] 0x80110a28
[..snip..]

The current code does not request the GPIO and attempts
to set its direction, which is a violation of the GPIO API.
This patch also unhardcode the GPIO we request and use
the one we defined in the button driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/mtx-1/platform.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 8b5914d1241..e30e42add69 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -1,7 +1,7 @@
 /*
  * MTX-1 platform devices registration
  *
- * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -142,7 +142,17 @@ static struct __initdata platform_device * mtx1_devs[] = {
 
 static int __init mtx1_register_devices(void)
 {
-	gpio_direction_input(207);
+	int rc;
+
+	rc = gpio_request(mtx1_gpio_button[0].gpio,
+					mtx1_gpio_button[0].desc);
+	if (rc < 0) {
+		printk(KERN_INFO "mtx1: failed to request %d\n",
+					mtx1_gpio_button[0].gpio);
+		goto out;
+	}
+	gpio_direction_input(mtx1_gpio_button[0].gpio);
+out:
 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
 
-- 
cgit v1.2.3


From 64f1815507f207ec54ee6b9ae69c48bd153e83b4 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 2 Aug 2009 10:48:08 +0200
Subject: MIPS: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/nxp/pnx8550/common/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c
index 8df43e9e4d9..18b19278487 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/nxp/pnx8550/common/time.c
@@ -138,7 +138,7 @@ __init void plat_time_init(void)
 	 * HZ timer interrupts per second.
 	 */
 	mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p));
-	cpj = (mips_hpt_frequency + HZ / 2) / HZ;
+	cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
 	write_c0_count(0);
 	timer_ack();
 
-- 
cgit v1.2.3


From 3d4656d68bad84604f5b01f93e066cd02f77154b Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 31 Jul 2009 14:52:51 +0200
Subject: MIPS: Jazz: Fix read buffer overflow

Check whether index is within bounds before testing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/jazz/jazzdma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index f0fd636723b..0d64d0f4641 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -190,7 +190,7 @@ int vdma_free(unsigned long laddr)
 		return -1;
 	}
 
-	while (pgtbl[i].owner == laddr && i < VDMA_PGTBL_ENTRIES) {
+	while (i < VDMA_PGTBL_ENTRIES && pgtbl[i].owner == laddr) {
 		pgtbl[i].owner = VDMA_PAGE_EMPTY;
 		i++;
 	}
-- 
cgit v1.2.3


From 39b3d44624e9c54e7406274beaf569fe33af2b96 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Fri, 31 Jul 2009 14:30:07 -0700
Subject: MIPS: Octeon: Run IPI code with interrupts disabled.

In mm/slab.c the function do_ccupdate_local requires that interrupts be
disabled.  If they are not, we panic with CONFIG_DEBUG_SLAB.

So we disable interrupts while processing IPIs.  Also these are not shared
irqs, so get rid of the IRQF_SHARED flag.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/smp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 0b891a9c625..32d51a31dc4 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -194,11 +194,11 @@ static void octeon_init_secondary(void)
 void octeon_prepare_cpus(unsigned int max_cpus)
 {
 	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
-	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED,
+	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED,
 			"mailbox0", mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
 	}
-	if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED,
+	if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED,
 			"mailbox1", mailbox_interrupt)) {
 		panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
 	}
-- 
cgit v1.2.3


From 6f9fdeb6761a46ded6bf4b799993a3f235ab853d Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 3 Aug 2009 10:50:19 +0100
Subject: MIPS: Module: Make error messages unique.

There were three different errors resulting in a "dangerous relocation"
message.  Add the relocation type to the messgages to make them more
useful.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/module.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e465851a616..6f51dda87fc 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -98,7 +98,8 @@ static int apply_r_mips_32_rela(struct module *me, u32 *location, Elf_Addr v)
 static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
 {
 	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		pr_err("module %s: dangerous R_MIPS_26 REL relocation\n",
+		       me->name);
 		return -ENOEXEC;
 	}
 
@@ -118,7 +119,8 @@ static int apply_r_mips_26_rel(struct module *me, u32 *location, Elf_Addr v)
 static int apply_r_mips_26_rela(struct module *me, u32 *location, Elf_Addr v)
 {
 	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation\n", me->name);
+		pr_err("module %s: dangerous R_MIPS_26 RELArelocation\n",
+		       me->name);
 		return -ENOEXEC;
 	}
 
@@ -222,7 +224,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v)
 	return 0;
 
 out_danger:
-	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
+	pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name);
 
 	return -ENOEXEC;
 }
-- 
cgit v1.2.3


From e2a9cf96a0af24f33206b4bb98cc3a12242260c1 Mon Sep 17 00:00:00 2001
From: Raghu Gandham <raghu@mips.com>
Date: Fri, 10 Jul 2009 02:01:32 -0700
Subject: MIPS: VPE: Fix compiler warning.

Signed-off-by: Raghu Gandham <raghu@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vpe.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 07b9ec2c6e3..3d4ef841d82 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -327,7 +327,8 @@ static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
 			    || (s->sh_flags & masks[m][1])
 			    || s->sh_entsize != ~0UL)
 				continue;
-			s->sh_entsize = get_offset(&mod->core_size, s);
+			s->sh_entsize =
+				get_offset((unsigned long *)&mod->core_size, s);
 		}
 
 		if (m == 0)
-- 
cgit v1.2.3


From 477c4b07406357ad93d0e32788dbf3ee814eadaa Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 3 Aug 2009 12:26:40 +0100
Subject: MIPS: VPE: Free relocation chain on error.

This may happen if a bad sequence of relocations is being encountered.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vpe.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3d4ef841d82..245b03e8808 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -462,16 +462,15 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 {
 	unsigned long insnlo = *location;
 	Elf32_Addr val, vallo;
+	struct mips_hi16 *l, *next;
 
 	/* Sign extend the addend we extract from the lo insn.  */
 	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
 
 	if (mips_hi16_list != NULL) {
-		struct mips_hi16 *l;
 
 		l = mips_hi16_list;
 		while (l != NULL) {
-			struct mips_hi16 *next;
 			unsigned long insn;
 
 			/*
@@ -481,7 +480,7 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 				printk(KERN_DEBUG "VPE loader: "
 				       "apply_r_mips_lo16/hi16: \t"
 				       "inconsistent value information\n");
-				return -ENOEXEC;
+				goto out_free;
 			}
 
 			/*
@@ -519,6 +518,16 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 	*location = insnlo;
 
 	return 0;
+
+out_free:
+	while (l != NULL) {
+		next = l->next;
+		kfree(l);
+		l = next;
+	}
+	mips_hi16_list = NULL;
+
+	return -ENOEXEC;
 }
 
 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
-- 
cgit v1.2.3


From f18b51cc1f97ca290256e8f94127f6856a42d605 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 3 Aug 2009 12:54:35 +0100
Subject: MIPS: VPE: Make various functions static.

None of these is used outside the VPE loader.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vpe.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 245b03e8808..6cbeb2a5452 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -155,10 +155,9 @@ struct {
 };
 
 static void release_progmem(void *ptr);
-extern void save_gp_address(unsigned int secbase, unsigned int rel);
 
 /* get the vpe associated with this minor */
-struct vpe *get_vpe(int minor)
+static struct vpe *get_vpe(int minor)
 {
 	struct vpe *v;
 
@@ -174,7 +173,7 @@ struct vpe *get_vpe(int minor)
 }
 
 /* get the vpe associated with this minor */
-struct tc *get_tc(int index)
+static struct tc *get_tc(int index)
 {
 	struct tc *t;
 
@@ -199,7 +198,7 @@ struct tc *get_tc_unused(void)
 }
 
 /* allocate a vpe and associate it with this minor (or index) */
-struct vpe *alloc_vpe(int minor)
+static struct vpe *alloc_vpe(int minor)
 {
 	struct vpe *v;
 
@@ -216,7 +215,7 @@ struct vpe *alloc_vpe(int minor)
 }
 
 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
-struct tc *alloc_tc(int index)
+static struct tc *alloc_tc(int index)
 {
 	struct tc *tc;
 
@@ -232,7 +231,7 @@ out:
 }
 
 /* clean up and free everything */
-void release_vpe(struct vpe *v)
+static void release_vpe(struct vpe *v)
 {
 	list_del(&v->list);
 	if (v->load_addr)
@@ -240,7 +239,7 @@ void release_vpe(struct vpe *v)
 	kfree(v);
 }
 
-void dump_mtregs(void)
+static void dump_mtregs(void)
 {
 	unsigned long val;
 
@@ -551,7 +550,7 @@ static char *rstrs[] = {
 	[R_MIPS_PC16] = "MIPS_PC16"
 };
 
-int apply_relocations(Elf32_Shdr *sechdrs,
+static int apply_relocations(Elf32_Shdr *sechdrs,
 		      const char *strtab,
 		      unsigned int symindex,
 		      unsigned int relsec,
@@ -596,7 +595,7 @@ int apply_relocations(Elf32_Shdr *sechdrs,
 	return 0;
 }
 
-void save_gp_address(unsigned int secbase, unsigned int rel)
+static inline void save_gp_address(unsigned int secbase, unsigned int rel)
 {
 	gp_addr = secbase + rel;
 	gp_offs = gp_addr - (secbase & 0xffff0000);
-- 
cgit v1.2.3


From 349c4229ed305146a558008d393c622d715cd11d Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 3 Aug 2009 12:56:39 +0100
Subject: MIPS: VPE: Fix bogus indentation.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vpe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 6cbeb2a5452..e3687524fdb 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -73,7 +73,7 @@ static int major;
 static const int minor = 1;	/* fixed for now  */
 
 #ifdef CONFIG_MIPS_APSP_KSPD
- static struct kspd_notifications kspd_events;
+static struct kspd_notifications kspd_events;
 static int kspd_events_reqd = 0;
 #endif
 
-- 
cgit v1.2.3


From ce21f4e86f89d352efecd044958db1917033b49b Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 3 Aug 2009 12:57:52 +0100
Subject: MIPS: VPE: Delete unused function get_tc_unused().

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vpe.c | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index e3687524fdb..9a1ab7e87fd 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -185,18 +185,6 @@ static struct tc *get_tc(int index)
 	return NULL;
 }
 
-struct tc *get_tc_unused(void)
-{
-	struct tc *t;
-
-	list_for_each_entry(t, &vpecontrol.tc_list, list) {
-		if (t->state == TC_STATE_UNUSED)
-			return t;
-	}
-
-	return NULL;
-}
-
 /* allocate a vpe and associate it with this minor (or index) */
 static struct vpe *alloc_vpe(int minor)
 {
-- 
cgit v1.2.3


From 54822de7793bf9aa56d79cc173281cdb23b37f9f Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 3 Aug 2009 17:27:19 +0100
Subject: MIPS: Wire up accept4 syscall.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/unistd.h | 15 +++++++++------
 arch/mips/kernel/scall32-o32.S |  1 +
 arch/mips/kernel/scall64-64.S  |  1 +
 arch/mips/kernel/scall64-n32.S |  1 +
 arch/mips/kernel/scall64-o32.S |  1 +
 5 files changed, 13 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index b70c49fdda2..e753a777949 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -354,16 +354,17 @@
 #define __NR_pwritev			(__NR_Linux + 331)
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
 #define __NR_perf_counter_open		(__NR_Linux + 333)
+#define __NR_accept4			(__NR_Linux + 334)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		333
+#define __NR_Linux_syscalls		334
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		333
+#define __NR_O32_Linux_syscalls		334
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -664,16 +665,17 @@
 #define __NR_pwritev			(__NR_Linux + 290)
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
 #define __NR_perf_counter_open		(__NR_Linux + 292)
+#define __NR_accept4			(__NR_Linux + 293)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		292
+#define __NR_Linux_syscalls		293
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		292
+#define __NR_64_Linux_syscalls		293
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -978,16 +980,17 @@
 #define __NR_pwritev			(__NR_Linux + 294)
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
 #define __NR_perf_counter_open		(__NR_Linux + 296)
+#define __NR_accept4			(__NR_Linux + 297)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		296
+#define __NR_Linux_syscalls		297
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		296
+#define __NR_N32_Linux_syscalls		297
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 20a86e08fd5..b5708212353 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -654,6 +654,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_pwritev		6
 	sys	sys_rt_tgsigqueueinfo	4
 	sys	sys_perf_counter_open	5
+	sys	sys_accept4		4
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index b046130d4c5..3d866f24e06 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -491,4 +491,5 @@ sys_call_table:
 	PTR	sys_pwritev			/* 5390 */
 	PTR	sys_rt_tgsigqueueinfo
 	PTR	sys_perf_counter_open
+	PTR	sys_accept4
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 15874f9812c..e855b118a07 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -417,4 +417,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_pwritev
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
 	PTR	sys_perf_counter_open
+	PTR	sys_accept4
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 781e0f1e953..0c49f1a660b 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -537,4 +537,5 @@ sys_call_table:
 	PTR	compat_sys_pwritev
 	PTR	compat_sys_rt_tgsigqueueinfo
 	PTR	sys_perf_counter_open
+	PTR	sys_accept4
 	.size	sys_call_table,.-sys_call_table
-- 
cgit v1.2.3


From 8523acfe40efc1a8d3da8f473ca67cb195b06f0c Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Mon, 3 Aug 2009 09:25:45 +0200
Subject: x86: Fix CPA memtype reserving in the set_pages_array*() cases

The code was incorrectly reserving memtypes using the page
virtual address instead of the physical address. Furthermore,
the code was not ignoring highmem pages as it ought to.

( upstream does not pass in highmem pages yet - but upcoming
  graphics code will do it and there's no reason to not handle
  this properly in the CPA APIs.)

Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13884

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org>
Cc: dri-devel@lists.sourceforge.net
Cc: venkatesh.pallipadi@intel.com
LKML-Reference: <1249284345-7654-1-git-send-email-thellstrom@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 895d90e1a81..7e600c1962d 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -591,9 +591,12 @@ static int __change_page_attr(struct cpa_data *cpa, int primary)
 	unsigned int level;
 	pte_t *kpte, old_pte;
 
-	if (cpa->flags & CPA_PAGES_ARRAY)
-		address = (unsigned long)page_address(cpa->pages[cpa->curpage]);
-	else if (cpa->flags & CPA_ARRAY)
+	if (cpa->flags & CPA_PAGES_ARRAY) {
+		struct page *page = cpa->pages[cpa->curpage];
+		if (unlikely(PageHighMem(page)))
+			return 0;
+		address = (unsigned long)page_address(page);
+	} else if (cpa->flags & CPA_ARRAY)
 		address = cpa->vaddr[cpa->curpage];
 	else
 		address = *cpa->vaddr;
@@ -697,9 +700,12 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	 * No need to redo, when the primary call touched the direct
 	 * mapping already:
 	 */
-	if (cpa->flags & CPA_PAGES_ARRAY)
-		vaddr = (unsigned long)page_address(cpa->pages[cpa->curpage]);
-	else if (cpa->flags & CPA_ARRAY)
+	if (cpa->flags & CPA_PAGES_ARRAY) {
+		struct page *page = cpa->pages[cpa->curpage];
+		if (unlikely(PageHighMem(page)))
+			return 0;
+		vaddr = (unsigned long)page_address(page);
+	} else if (cpa->flags & CPA_ARRAY)
 		vaddr = cpa->vaddr[cpa->curpage];
 	else
 		vaddr = *cpa->vaddr;
@@ -1122,7 +1128,9 @@ int set_pages_array_uc(struct page **pages, int addrinarray)
 	int free_idx;
 
 	for (i = 0; i < addrinarray; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
 			goto err_out;
@@ -1135,7 +1143,9 @@ int set_pages_array_uc(struct page **pages, int addrinarray)
 err_out:
 	free_idx = i;
 	for (i = 0; i < free_idx; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		free_memtype(start, end);
 	}
@@ -1164,7 +1174,9 @@ int set_pages_array_wb(struct page **pages, int addrinarray)
 		return retval;
 
 	for (i = 0; i < addrinarray; i++) {
-		start = (unsigned long)page_address(pages[i]);
+		if (PageHighMem(pages[i]))
+			continue;
+		start = page_to_pfn(pages[i]) << PAGE_SHIFT;
 		end = start + PAGE_SIZE;
 		free_memtype(start, end);
 	}
-- 
cgit v1.2.3


From 6c6c51e4cc11a5456fb1172008f7c69d955af9f6 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 3 Aug 2009 22:47:32 +1000
Subject: x86: Add quirk to make Apple MacBook5,2 use reboot=pci

The latest Apple MacBook (MacBook5,2) doesn't reboot successfully
under Linux; neither the EFI reboot method nor the default method
using the keyboard controller works (the system just hangs and doesn't
reset).  However, the method using the "PCI reset register" at 0xcf9
does work.

This adds a quirk to detect this machine via DMI and force the
reboot_type to BOOT_CF9.  With this it reboots successfully without
requiring a command-line option.  Note that the EFI code forces
reboot_type to BOOT_EFI when the machine is booted via EFI, but this
overrides that since the core_initcall runs after the EFI
initialization code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
LKML-Reference: <19062.56420.501516.316181@cargo.ozlabs.ibm.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/reboot.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 508e982dd07..834c9da8bf9 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/efi.h>
+#include <linux/dmi.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
 #include <asm/apic.h>
@@ -17,7 +18,6 @@
 #include <asm/cpu.h>
 
 #ifdef CONFIG_X86_32
-# include <linux/dmi.h>
 # include <linux/ctype.h>
 # include <linux/mc146818rtc.h>
 #else
@@ -404,6 +404,38 @@ EXPORT_SYMBOL(machine_real_restart);
 
 #endif /* CONFIG_X86_32 */
 
+/*
+ * Apple MacBook5,2 (2009 MacBook) needs reboot=p
+ */
+static int __init set_pci_reboot(const struct dmi_system_id *d)
+{
+	if (reboot_type != BOOT_CF9) {
+		reboot_type = BOOT_CF9;
+		printk(KERN_INFO "%s series board detected. "
+		       "Selecting PCI-method for reboots.\n", d->ident);
+	}
+	return 0;
+}
+
+static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
+	{	/* Handle problems with rebooting on Apple MacBook5,2 */
+		.callback = set_pci_reboot,
+		.ident = "Apple MacBook",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"),
+		},
+	},
+	{ }
+};
+
+static int __init pci_reboot_init(void)
+{
+	dmi_check_system(pci_reboot_dmi_table);
+	return 0;
+}
+core_initcall(pci_reboot_init);
+
 static inline void kb_wait(void)
 {
 	int i;
-- 
cgit v1.2.3


From 6a7bbd57ed50bb62c9a81ae5f2e202ca689e5964 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 3 Aug 2009 22:38:10 +1000
Subject: x86: Make 64-bit efi_ioremap use ioremap on MMIO regions

Booting current 64-bit x86 kernels on the latest Apple MacBook
(MacBook5,2) via EFI gives the following warning:

[    0.182209] ------------[ cut here ]------------
[    0.182222] WARNING: at arch/x86/mm/pageattr.c:581 __cpa_process_fault+0x44/0xa0()
[    0.182227] Hardware name: MacBook5,2
[    0.182231] CPA: called for zero pte. vaddr = ffff8800ffe00000 cpa->vaddr = ffff8800ffe00000
[    0.182236] Modules linked in:
[    0.182242] Pid: 0, comm: swapper Not tainted 2.6.31-rc4 #6
[    0.182246] Call Trace:
[    0.182254]  [<ffffffff8102c754>] ? __cpa_process_fault+0x44/0xa0
[    0.182261]  [<ffffffff81048668>] warn_slowpath_common+0x78/0xd0
[    0.182266]  [<ffffffff81048744>] warn_slowpath_fmt+0x64/0x70
[    0.182272]  [<ffffffff8102c7ec>] ? update_page_count+0x3c/0x50
[    0.182280]  [<ffffffff818d25c5>] ? phys_pmd_init+0x140/0x22e
[    0.182286]  [<ffffffff8102c754>] __cpa_process_fault+0x44/0xa0
[    0.182292]  [<ffffffff8102ce60>] __change_page_attr_set_clr+0x5f0/0xb40
[    0.182301]  [<ffffffff810d1035>] ? vm_unmap_aliases+0x175/0x190
[    0.182307]  [<ffffffff8102d4ae>] change_page_attr_set_clr+0xfe/0x3d0
[    0.182314]  [<ffffffff8102dcca>] _set_memory_uc+0x2a/0x30
[    0.182319]  [<ffffffff8102dd4b>] set_memory_uc+0x7b/0xb0
[    0.182327]  [<ffffffff818afe31>] efi_enter_virtual_mode+0x2ad/0x2c9
[    0.182334]  [<ffffffff818a1c66>] start_kernel+0x2db/0x3f4
[    0.182340]  [<ffffffff818a1289>] x86_64_start_reservations+0x99/0xb9
[    0.182345]  [<ffffffff818a1389>] x86_64_start_kernel+0xe0/0xf2
[    0.182357] ---[ end trace 4eaa2a86a8e2da22 ]---
[    0.182982] init_memory_mapping: 00000000ffffc000-0000000100000000
[    0.182993]  00ffffc000 - 0100000000 page 4k

This happens because the 64-bit version of efi_ioremap calls
init_memory_mapping for all addresses, regardless of whether they are
RAM or MMIO.  The EFI tables on this machine ask for runtime access to
some MMIO regions:

[    0.000000] EFI: mem195: type=11, attr=0x8000000000000000, range=[0x0000000093400000-0x0000000093401000) (0MB)
[    0.000000] EFI: mem196: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc40000) (0MB)
[    0.000000] EFI: mem197: type=11, attr=0x8000000000000000, range=[0x00000000ffc40000-0x00000000ffc80000) (0MB)
[    0.000000] EFI: mem198: type=11, attr=0x8000000000000000, range=[0x00000000ffc80000-0x00000000ffca4000) (0MB)
[    0.000000] EFI: mem199: type=11, attr=0x8000000000000000, range=[0x00000000ffca4000-0x00000000ffcb4000) (0MB)
[    0.000000] EFI: mem200: type=11, attr=0x8000000000000000, range=[0x00000000ffcb4000-0x00000000ffffc000) (3MB)
[    0.000000] EFI: mem201: type=11, attr=0x8000000000000000, range=[0x00000000ffffc000-0x0000000100000000) (0MB)

This arranges to pass the EFI memory type through to efi_ioremap, and
makes efi_ioremap use ioremap rather than init_memory_mapping if the
type is EFI_MEMORY_MAPPED_IO.  With this, the above warning goes away.

Signed-off-by: Paul Mackerras <paulus@samba.org>
LKML-Reference: <19062.55858.533494.471153@cargo.ozlabs.ibm.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/efi.h | 5 +++--
 arch/x86/kernel/efi.c      | 2 +-
 arch/x86/kernel/efi_64.c   | 6 +++++-
 3 files changed, 9 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index edc90f23e70..8406ed7f992 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -33,7 +33,7 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...);
 #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)	\
 	efi_call_virt(f, a1, a2, a3, a4, a5, a6)
 
-#define efi_ioremap(addr, size)			ioremap_cache(addr, size)
+#define efi_ioremap(addr, size, type)		ioremap_cache(addr, size)
 
 #else /* !CONFIG_X86_32 */
 
@@ -84,7 +84,8 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
 	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
 		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
 
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size);
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
+				 u32 type);
 
 #endif /* CONFIG_X86_32 */
 
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 96f7ac0bbf0..19ccf6d0dcc 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -512,7 +512,7 @@ void __init efi_enter_virtual_mode(void)
 			&& end_pfn <= max_pfn_mapped))
 			va = __va(md->phys_addr);
 		else
-			va = efi_ioremap(md->phys_addr, size);
+			va = efi_ioremap(md->phys_addr, size, md->type);
 
 		md->virt_addr = (u64) (unsigned long) va;
 
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 22c3b7828c5..ac0621a7ac3 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -98,10 +98,14 @@ void __init efi_call_phys_epilog(void)
 	early_runtime_code_mapping_set_exec(0);
 }
 
-void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
+				 u32 type)
 {
 	unsigned long last_map_pfn;
 
+	if (type == EFI_MEMORY_MAPPED_IO)
+		return ioremap(phys_addr, size);
+
 	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
 	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
 		return NULL;
-- 
cgit v1.2.3


From d2ba8b211bb8abc29aa627dbd4dce08cfbc8082b Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 3 Aug 2009 14:44:54 -0700
Subject: x86: Fix assert syntax in vmlinux.lds.S

Older versions of binutils did not accept the naked "ASSERT" syntax;
it is considered an expression whose value needs to be assigned to
something.

Reported-tested-and-fixed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/vmlinux.lds.S | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 59f31d2dd43..78d185d797d 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -393,8 +393,8 @@ SECTIONS
 
 
 #ifdef CONFIG_X86_32
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
-        "kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+	   "kernel image bigger than KERNEL_IMAGE_SIZE");
 #else
 /*
  * Per-cpu symbols which need to be offset from __per_cpu_load
@@ -407,12 +407,12 @@ INIT_PER_CPU(irq_stack_union);
 /*
  * Build-time check on the image size:
  */
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
-	"kernel image bigger than KERNEL_IMAGE_SIZE")
+. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+	   "kernel image bigger than KERNEL_IMAGE_SIZE");
 
 #ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
-        "irq_stack_union is not at start of per-cpu area");
+. = ASSERT((per_cpu__irq_stack_union == 0),
+           "irq_stack_union is not at start of per-cpu area");
 #endif
 
 #endif /* CONFIG_X86_32 */
@@ -420,7 +420,7 @@ ASSERT((per_cpu__irq_stack_union == 0),
 #ifdef CONFIG_KEXEC
 #include <asm/kexec.h>
 
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
-       "kexec control code size is too big")
+. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+           "kexec control code size is too big");
 #endif
 
-- 
cgit v1.2.3


From bab9a3da93bfe09c609407dedae5708b07a7ac56 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Thu, 30 Jul 2009 11:10:01 +0200
Subject: x86, msr: execute on the correct CPU subset

Make rdmsr_on_cpus/wrmsr_on_cpus execute on the current CPU only if it
is in the supplied bitmask.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/lib/msr.c | 26 ++++++++++----------------
 1 file changed, 10 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index 1440b9c0547..caa24aca811 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -89,16 +89,13 @@ void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
 	rv.msrs	  = msrs;
 	rv.msr_no = msr_no;
 
-	preempt_disable();
-	/*
-	 * FIXME: handle the CPU we're executing on separately for now until
-	 * smp_call_function_many has been fixed to not skip it.
-	 */
-	this_cpu = raw_smp_processor_id();
-	smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1);
+	this_cpu = get_cpu();
+
+	if (cpumask_test_cpu(this_cpu, mask))
+		__rdmsr_on_cpu(&rv);
 
 	smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
-	preempt_enable();
+	put_cpu();
 }
 EXPORT_SYMBOL(rdmsr_on_cpus);
 
@@ -121,16 +118,13 @@ void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
 	rv.msrs   = msrs;
 	rv.msr_no = msr_no;
 
-	preempt_disable();
-	/*
-	 * FIXME: handle the CPU we're executing on separately for now until
-	 * smp_call_function_many has been fixed to not skip it.
-	 */
-	this_cpu = raw_smp_processor_id();
-	smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1);
+	this_cpu = get_cpu();
+
+	if (cpumask_test_cpu(this_cpu, mask))
+		__wrmsr_on_cpu(&rv);
 
 	smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
-	preempt_enable();
+	put_cpu();
 }
 EXPORT_SYMBOL(wrmsr_on_cpus);
 
-- 
cgit v1.2.3


From f1f029c7bfbf4ee1918b90a431ab823bed812504 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 3 Aug 2009 16:33:40 -0700
Subject: x86: fix assembly constraints in native_save_fl()

From Gabe Black in bugzilla 13888:

native_save_fl is implemented as follows:

  11static inline unsigned long native_save_fl(void)
  12{
  13        unsigned long flags;
  14
  15        asm volatile("# __raw_save_flags\n\t"
  16                     "pushf ; pop %0"
  17                     : "=g" (flags)
  18                     : /* no input */
  19                     : "memory");
  20
  21        return flags;
  22}

If gcc chooses to put flags on the stack, for instance because this is
inlined into a larger function with more register pressure, the offset
of the flags variable from the stack pointer will change when the
pushf is performed. gcc doesn't attempt to understand that fact, and
address used for pop will still be the same. It will write to
somewhere near flags on the stack but not actually into it and
overwrite some other value.

I saw this happen in the ide_device_add_all function when running in a
simulator I work on. I'm assuming that some quirk of how the simulated
hardware is set up caused the code path this is on to be executed when
it normally wouldn't.

A simple fix might be to change "=g" to "=r".

Reported-by: Gabe Black <spamforgabe@umich.edu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Stable Team <stable@kernel.org>
---
 arch/x86/include/asm/irqflags.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 2bdab21f089..c6ccbe7e81a 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -12,9 +12,15 @@ static inline unsigned long native_save_fl(void)
 {
 	unsigned long flags;
 
+	/*
+	 * Note: this needs to be "=r" not "=rm", because we have the
+	 * stack offset from what gcc expects at the time the "pop" is
+	 * executed, and so a memory reference with respect to the stack
+	 * would end up using the wrong address.
+	 */
 	asm volatile("# __raw_save_flags\n\t"
 		     "pushf ; pop %0"
-		     : "=g" (flags)
+		     : "=r" (flags)
 		     : /* no input */
 		     : "memory");
 
-- 
cgit v1.2.3


From 05aa7882757f68af799140142ec44f83b2df4298 Mon Sep 17 00:00:00 2001
From: Rafael Ignacio Zurita <rizurita@yahoo.com>
Date: Tue, 4 Aug 2009 14:38:08 +0900
Subject: sh: Add early printk support for SH770x CPUs.

This adds early printk support for SH770x (tested on SH7709 based hp6xx).

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug         | 1 +
 arch/sh/kernel/early_printk.c | 6 ++----
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index a6dce41296e..763b792b161 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -43,6 +43,7 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
 	default "0xffe80000" if CPU_SH4
+	default "0xa4000150" if CPU_SH3
 	default "0x00000000"
 
 config EARLY_PRINTK
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index a952dcf9999..64f2746baf9 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -134,7 +134,7 @@ static void scif_sercon_init(char *s)
 	sci_out(&scif_port, SCFCR, 0x0030);	/* TTRG=b'11 */
 	sci_out(&scif_port, SCSCR, 0x0030);	/* TE, RE */
 }
-#elif defined(CONFIG_CPU_SH4)
+#elif defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
 #define DEFAULT_BAUD 115200
 /*
  * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4
@@ -220,10 +220,8 @@ static int __init setup_early_printk(char *buf)
 		early_console = &scif_console;
 
 #if !defined(CONFIG_SH_STANDARD_BIOS)
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
 		scif_sercon_init(buf + 6);
-#endif
 #endif
 	}
 #endif
-- 
cgit v1.2.3


From 6ba4a8f0f542e791e4158c91a844234b142578dc Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 06:57:36 +0000
Subject: sh: hwblk support for sh7724

This patch adds hwblk support for the sh7724 processor.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/cpu-sh4/cpu/sh7724.h   |  17 +++++
 arch/sh/kernel/cpu/sh4a/Makefile       |   2 +-
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 119 ++++++++++++++++----------------
 arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c | 121 +++++++++++++++++++++++++++++++++
 4 files changed, 201 insertions(+), 58 deletions(-)
 create mode 100644 arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c

(limited to 'arch')

diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index 66fd1184359..0cd1f71a111 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -266,4 +266,21 @@ enum {
 	GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
 };
 
+enum {
+	HWBLK_UNKNOWN = 0,
+	HWBLK_TLB, HWBLK_IC, HWBLK_OC, HWBLK_RSMEM, HWBLK_ILMEM, HWBLK_L2C,
+	HWBLK_FPU, HWBLK_INTC, HWBLK_DMAC0, HWBLK_SHYWAY,
+	HWBLK_HUDI, HWBLK_DBG, HWBLK_UBC,
+	HWBLK_TMU0, HWBLK_CMT, HWBLK_RWDT, HWBLK_DMAC1, HWBLK_TMU1,
+	HWBLK_SCIF0, HWBLK_SCIF1, HWBLK_SCIF2, HWBLK_SCIF3,
+	HWBLK_SCIF4, HWBLK_SCIF5, HWBLK_MSIOF0, HWBLK_MSIOF1,
+	HWBLK_KEYSC, HWBLK_RTC, HWBLK_IIC0, HWBLK_IIC1,
+	HWBLK_MMC, HWBLK_ETHER, HWBLK_ATAPI, HWBLK_TPU, HWBLK_IRDA,
+	HWBLK_TSIF, HWBLK_USB1, HWBLK_USB0, HWBLK_2DG,
+	HWBLK_SDHI0, HWBLK_SDHI1, HWBLK_VEU1, HWBLK_CEU1, HWBLK_BEU1,
+	HWBLK_2DDMAC, HWBLK_SPU, HWBLK_JPU, HWBLK_VOU,
+	HWBLK_BEU0, HWBLK_CEU0,	HWBLK_VEU0, HWBLK_VPU, HWBLK_LCDC,
+	HWBLK_NR,
+};
+
 #endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 1d7ae38bc61..12cddf4c721 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -27,7 +27,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7786)	:= clock-sh7786.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o hwblk-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7723.o hwblk-sh7723.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7724)	:= clock-sh7724.o hwblk-sh7724.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7366.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 5d5c9b95288..ba24e38c9fc 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <asm/clock.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7724.h>
 
 /* SH7724 registers */
 #define FRQCRA		0xa4150000
@@ -156,64 +158,67 @@ struct clk div6_clks[] = {
 	SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, 0),
 };
 
-#define MSTP(_str, _parent, _reg, _bit, _force_on, _need_cpg, _need_ram) \
-  SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _force_on * CLK_ENABLE_ON_INIT)
+#define R_CLK (&r_clk)
+#define P_CLK (&div4_clks[DIV4_P])
+#define B_CLK (&div4_clks[DIV4_B])
+#define I_CLK (&div4_clks[DIV4_I])
+#define SH_CLK (&div4_clks[DIV4_SH])
 
 static struct clk mstp_clks[] = {
-	MSTP("tlb0", &div4_clks[DIV4_I], MSTPCR0, 31, 1, 1, 0),
-	MSTP("ic0", &div4_clks[DIV4_I], MSTPCR0, 30, 1, 1, 0),
-	MSTP("oc0", &div4_clks[DIV4_I], MSTPCR0, 29, 1, 1, 0),
-	MSTP("rs0", &div4_clks[DIV4_B], MSTPCR0, 28, 1, 1, 0),
-	MSTP("ilmem0", &div4_clks[DIV4_I], MSTPCR0, 27, 1, 1, 0),
-	MSTP("l2c0", &div4_clks[DIV4_SH], MSTPCR0, 26, 1, 1, 0),
-	MSTP("fpu0", &div4_clks[DIV4_I], MSTPCR0, 24, 1, 1, 0),
-	MSTP("intc0", &div4_clks[DIV4_P], MSTPCR0, 22, 1, 1, 0),
-	MSTP("dmac0", &div4_clks[DIV4_B], MSTPCR0, 21, 0, 1, 1),
-	MSTP("sh0", &div4_clks[DIV4_SH], MSTPCR0, 20, 0, 1, 0),
-	MSTP("hudi0", &div4_clks[DIV4_P], MSTPCR0, 19, 0, 1, 0),
-	MSTP("ubc0", &div4_clks[DIV4_I], MSTPCR0, 17, 0, 1, 0),
-	MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0, 1, 0),
-	MSTP("cmt0", &r_clk, MSTPCR0, 14, 0, 0, 0),
-	MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0, 0, 0),
-	MSTP("dmac1", &div4_clks[DIV4_B], MSTPCR0, 12, 0, 1, 1),
-	MSTP("tmu1", &div4_clks[DIV4_P], MSTPCR0, 10, 0, 1, 0),
-	MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 9, 0, 1, 0),
-	MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 8, 0, 1, 0),
-	MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 7, 0, 1, 0),
-	MSTP("scif3", &div4_clks[DIV4_B], MSTPCR0, 6, 0, 1, 0),
-	MSTP("scif4", &div4_clks[DIV4_B], MSTPCR0, 5, 0, 1, 0),
-	MSTP("scif5", &div4_clks[DIV4_B], MSTPCR0, 4, 0, 1, 0),
-	MSTP("msiof0", &div4_clks[DIV4_B], MSTPCR0, 2, 0, 1, 0),
-	MSTP("msiof1", &div4_clks[DIV4_B], MSTPCR0, 1, 0, 1, 0),
-
-	MSTP("keysc0", &r_clk, MSTPCR1, 12, 0, 0, 0),
-	MSTP("rtc0", &r_clk, MSTPCR1, 11, 0, 0, 0),
-	MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0, 1, 0),
-	MSTP("i2c1", &div4_clks[DIV4_P], MSTPCR1, 8, 0, 1, 0),
-
-	MSTP("mmc0", &div4_clks[DIV4_B], MSTPCR2, 29, 0, 1, 0),
-	MSTP("eth0", &div4_clks[DIV4_B], MSTPCR2, 28, 0, 1, 0),
-	MSTP("atapi0", &div4_clks[DIV4_B], MSTPCR2, 26, 0, 1, 0),
-	MSTP("tpu0", &div4_clks[DIV4_B], MSTPCR2, 25, 0, 1, 0),
-	MSTP("irda0", &div4_clks[DIV4_P], MSTPCR2, 24, 0, 1, 0),
-	MSTP("tsif0", &div4_clks[DIV4_B], MSTPCR2, 22, 0, 1, 0),
-	MSTP("usb1", &div4_clks[DIV4_B], MSTPCR2, 21, 0, 1, 1),
-	MSTP("usb0", &div4_clks[DIV4_B], MSTPCR2, 20, 0, 1, 1),
-	MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 19, 0, 1, 1),
-	MSTP("sdhi0", &div4_clks[DIV4_B], MSTPCR2, 18, 0, 1, 0),
-	MSTP("sdhi1", &div4_clks[DIV4_B], MSTPCR2, 17, 0, 1, 0),
-	MSTP("veu1", &div4_clks[DIV4_B], MSTPCR2, 15, 1, 1, 1),
-	MSTP("ceu1", &div4_clks[DIV4_B], MSTPCR2, 13, 0, 1, 1),
-	MSTP("beu1", &div4_clks[DIV4_B], MSTPCR2, 12, 0, 1, 1),
-	MSTP("2ddmac0", &div4_clks[DIV4_SH], MSTPCR2, 10, 0, 1, 1),
-	MSTP("spu0", &div4_clks[DIV4_B], MSTPCR2, 9, 0, 1, 0),
-	MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, 1, 1, 1),
-	MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0, 1, 1),
-	MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0, 1, 1),
-	MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0, 1, 1),
-	MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, 1, 1, 1),
-	MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, 1, 1, 1),
-	MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0, 1, 1),
+	SH_HWBLK_CLK("tlb0", -1, I_CLK, HWBLK_TLB, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ic0", -1, I_CLK, HWBLK_IC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("oc0", -1, I_CLK, HWBLK_OC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("rs0", -1, B_CLK, HWBLK_RSMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ilmem0", -1, I_CLK, HWBLK_ILMEM, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("l2c0", -1, SH_CLK, HWBLK_L2C, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("fpu0", -1, I_CLK, HWBLK_FPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("intc0", -1, P_CLK, HWBLK_INTC, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("dmac0", -1, B_CLK, HWBLK_DMAC0, 0),
+	SH_HWBLK_CLK("sh0", -1, SH_CLK, HWBLK_SHYWAY, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("hudi0", -1, P_CLK, HWBLK_HUDI, 0),
+	SH_HWBLK_CLK("ubc0", -1, I_CLK, HWBLK_UBC, 0),
+	SH_HWBLK_CLK("tmu0", -1, P_CLK, HWBLK_TMU0, 0),
+	SH_HWBLK_CLK("cmt0", -1, R_CLK, HWBLK_CMT, 0),
+	SH_HWBLK_CLK("rwdt0", -1, R_CLK, HWBLK_RWDT, 0),
+	SH_HWBLK_CLK("dmac1", -1, B_CLK, HWBLK_DMAC1, 0),
+	SH_HWBLK_CLK("tmu1", -1, P_CLK, HWBLK_TMU1, 0),
+	SH_HWBLK_CLK("scif0", -1, P_CLK, HWBLK_SCIF0, 0),
+	SH_HWBLK_CLK("scif1", -1, P_CLK, HWBLK_SCIF1, 0),
+	SH_HWBLK_CLK("scif2", -1, P_CLK, HWBLK_SCIF2, 0),
+	SH_HWBLK_CLK("scif3", -1, B_CLK, HWBLK_SCIF3, 0),
+	SH_HWBLK_CLK("scif4", -1, B_CLK, HWBLK_SCIF4, 0),
+	SH_HWBLK_CLK("scif5", -1, B_CLK, HWBLK_SCIF5, 0),
+	SH_HWBLK_CLK("msiof0", -1, B_CLK, HWBLK_MSIOF0, 0),
+	SH_HWBLK_CLK("msiof1", -1, B_CLK, HWBLK_MSIOF1, 0),
+
+	SH_HWBLK_CLK("keysc0", -1, R_CLK, HWBLK_KEYSC, 0),
+	SH_HWBLK_CLK("rtc0", -1, R_CLK, HWBLK_RTC, 0),
+	SH_HWBLK_CLK("i2c0", -1, P_CLK, HWBLK_IIC0, 0),
+	SH_HWBLK_CLK("i2c1", -1, P_CLK, HWBLK_IIC1, 0),
+
+	SH_HWBLK_CLK("mmc0", -1, B_CLK, HWBLK_MMC, 0),
+	SH_HWBLK_CLK("eth0", -1, B_CLK, HWBLK_ETHER, 0),
+	SH_HWBLK_CLK("atapi0", -1, B_CLK, HWBLK_ATAPI, 0),
+	SH_HWBLK_CLK("tpu0", -1, B_CLK, HWBLK_TPU, 0),
+	SH_HWBLK_CLK("irda0", -1, P_CLK, HWBLK_IRDA, 0),
+	SH_HWBLK_CLK("tsif0", -1, B_CLK, HWBLK_TSIF, 0),
+	SH_HWBLK_CLK("usb1", -1, B_CLK, HWBLK_USB1, 0),
+	SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB0, 0),
+	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
+	SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0),
+	SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0),
+	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU1, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("ceu1", -1, B_CLK, HWBLK_CEU1, 0),
+	SH_HWBLK_CLK("beu1", -1, B_CLK, HWBLK_BEU1, 0),
+	SH_HWBLK_CLK("2ddmac0", -1, SH_CLK, HWBLK_2DDMAC, 0),
+	SH_HWBLK_CLK("spu0", -1, B_CLK, HWBLK_SPU, 0),
+	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
+	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU0, 0),
+	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU0, 0),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU0, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
 };
 
 int __init arch_clk_init(void)
@@ -236,7 +241,7 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks));
 
 	if (!ret)
-		ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
+		ret = sh_hwblk_clk_register(mstp_clks, ARRAY_SIZE(mstp_clks));
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c b/arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c
new file mode 100644
index 00000000000..1613ad6013c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c
@@ -0,0 +1,121 @@
+/*
+ * arch/sh/kernel/cpu/sh4a/hwblk-sh7724.c
+ *
+ * SH7724 hardware block support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/suspend.h>
+#include <asm/hwblk.h>
+#include <cpu/sh7724.h>
+
+/* SH7724 registers */
+#define MSTPCR0		0xa4150030
+#define MSTPCR1		0xa4150034
+#define MSTPCR2		0xa4150038
+
+/* SH7724 Power Domains */
+enum { CORE_AREA, SUB_AREA, CORE_AREA_BM };
+static struct hwblk_area sh7724_hwblk_area[] = {
+	[CORE_AREA] = HWBLK_AREA(0, 0),
+	[CORE_AREA_BM] = HWBLK_AREA(HWBLK_AREA_FLAG_PARENT, CORE_AREA),
+	[SUB_AREA] = HWBLK_AREA(0, 0),
+};
+
+/* Table mapping HWBLK to Module Stop Bit and Power Domain */
+static struct hwblk sh7724_hwblk[HWBLK_NR] = {
+	[HWBLK_TLB] = HWBLK(MSTPCR0, 31, CORE_AREA),
+	[HWBLK_IC] = HWBLK(MSTPCR0, 30, CORE_AREA),
+	[HWBLK_OC] = HWBLK(MSTPCR0, 29, CORE_AREA),
+	[HWBLK_RSMEM] = HWBLK(MSTPCR0, 28, CORE_AREA),
+	[HWBLK_ILMEM] = HWBLK(MSTPCR0, 27, CORE_AREA),
+	[HWBLK_L2C] = HWBLK(MSTPCR0, 26, CORE_AREA),
+	[HWBLK_FPU] = HWBLK(MSTPCR0, 24, CORE_AREA),
+	[HWBLK_INTC] = HWBLK(MSTPCR0, 22, CORE_AREA),
+	[HWBLK_DMAC0] = HWBLK(MSTPCR0, 21, CORE_AREA_BM),
+	[HWBLK_SHYWAY] = HWBLK(MSTPCR0, 20, CORE_AREA),
+	[HWBLK_HUDI] = HWBLK(MSTPCR0, 19, CORE_AREA),
+	[HWBLK_DBG] = HWBLK(MSTPCR0, 18, CORE_AREA),
+	[HWBLK_UBC] = HWBLK(MSTPCR0, 17, CORE_AREA),
+	[HWBLK_TMU0] = HWBLK(MSTPCR0, 15, CORE_AREA),
+	[HWBLK_CMT] = HWBLK(MSTPCR0, 14, SUB_AREA),
+	[HWBLK_RWDT] = HWBLK(MSTPCR0, 13, SUB_AREA),
+	[HWBLK_DMAC1] = HWBLK(MSTPCR0, 12, CORE_AREA_BM),
+	[HWBLK_TMU1] = HWBLK(MSTPCR0, 10, CORE_AREA),
+	[HWBLK_SCIF0] = HWBLK(MSTPCR0, 9, CORE_AREA),
+	[HWBLK_SCIF1] = HWBLK(MSTPCR0, 8, CORE_AREA),
+	[HWBLK_SCIF2] = HWBLK(MSTPCR0, 7, CORE_AREA),
+	[HWBLK_SCIF3] = HWBLK(MSTPCR0, 6, CORE_AREA),
+	[HWBLK_SCIF4] = HWBLK(MSTPCR0, 5, CORE_AREA),
+	[HWBLK_SCIF5] = HWBLK(MSTPCR0, 4, CORE_AREA),
+	[HWBLK_MSIOF0] = HWBLK(MSTPCR0, 2, CORE_AREA),
+	[HWBLK_MSIOF1] = HWBLK(MSTPCR0, 1, CORE_AREA),
+
+	[HWBLK_KEYSC] = HWBLK(MSTPCR1, 12, SUB_AREA),
+	[HWBLK_RTC] = HWBLK(MSTPCR1, 11, SUB_AREA),
+	[HWBLK_IIC0] = HWBLK(MSTPCR1, 9, CORE_AREA),
+	[HWBLK_IIC1] = HWBLK(MSTPCR1, 8, CORE_AREA),
+
+	[HWBLK_MMC] = HWBLK(MSTPCR2, 29, CORE_AREA),
+	[HWBLK_ETHER] = HWBLK(MSTPCR2, 28, CORE_AREA_BM),
+	[HWBLK_ATAPI] = HWBLK(MSTPCR2, 26, CORE_AREA_BM),
+	[HWBLK_TPU] = HWBLK(MSTPCR2, 25, CORE_AREA),
+	[HWBLK_IRDA] = HWBLK(MSTPCR2, 24, CORE_AREA),
+	[HWBLK_TSIF] = HWBLK(MSTPCR2, 22, CORE_AREA),
+	[HWBLK_USB1] = HWBLK(MSTPCR2, 21, CORE_AREA),
+	[HWBLK_USB0] = HWBLK(MSTPCR2, 20, CORE_AREA),
+	[HWBLK_2DG] = HWBLK(MSTPCR2, 19, CORE_AREA_BM),
+	[HWBLK_SDHI0] = HWBLK(MSTPCR2, 18, CORE_AREA),
+	[HWBLK_SDHI1] = HWBLK(MSTPCR2, 17, CORE_AREA),
+	[HWBLK_VEU1] = HWBLK(MSTPCR2, 15, CORE_AREA_BM),
+	[HWBLK_CEU1] = HWBLK(MSTPCR2, 13, CORE_AREA_BM),
+	[HWBLK_BEU1] = HWBLK(MSTPCR2, 12, CORE_AREA_BM),
+	[HWBLK_2DDMAC] = HWBLK(MSTPCR2, 10, CORE_AREA_BM),
+	[HWBLK_SPU] = HWBLK(MSTPCR2, 9, CORE_AREA_BM),
+	[HWBLK_JPU] = HWBLK(MSTPCR2, 6, CORE_AREA_BM),
+	[HWBLK_VOU] = HWBLK(MSTPCR2, 5, CORE_AREA_BM),
+	[HWBLK_BEU0] = HWBLK(MSTPCR2, 4, CORE_AREA_BM),
+	[HWBLK_CEU0] = HWBLK(MSTPCR2, 3, CORE_AREA_BM),
+	[HWBLK_VEU0] = HWBLK(MSTPCR2, 2, CORE_AREA_BM),
+	[HWBLK_VPU] = HWBLK(MSTPCR2, 1, CORE_AREA_BM),
+	[HWBLK_LCDC] = HWBLK(MSTPCR2, 0, CORE_AREA_BM),
+};
+
+static struct hwblk_info sh7724_hwblk_info = {
+	.areas = sh7724_hwblk_area,
+	.nr_areas = ARRAY_SIZE(sh7724_hwblk_area),
+	.hwblks = sh7724_hwblk,
+	.nr_hwblks = ARRAY_SIZE(sh7724_hwblk),
+};
+
+int arch_hwblk_sleep_mode(void)
+{
+	if (!sh7724_hwblk_area[CORE_AREA].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_STANDBY | SUSP_SH_SF;
+
+	if (!sh7724_hwblk_area[CORE_AREA_BM].cnt[HWBLK_CNT_USAGE])
+		return SUSP_SH_SLEEP | SUSP_SH_SF;
+
+	return SUSP_SH_SLEEP;
+}
+
+int __init arch_hwblk_init(void)
+{
+	return hwblk_register(&sh7724_hwblk_info);
+}
-- 
cgit v1.2.3


From 133b170f08d6c20578f25b1ae71f80a5e638ccb6 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:01:36 +0000
Subject: sh: clean up MSTPCRn register definitions

This patch removes the unused MSTPCRn register definitions
from the SuperH Mobile code for sh7722, sh7723 and sh7724.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 3 ---
 arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 3 ---
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 3 ---
 3 files changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 1fa9e1dd1cc..5b1bbbe63b1 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -32,9 +32,6 @@
 #define SCLKBCR		0xa415000c
 #define IRDACLKCR	0xa4150018
 #define PLLCR		0xa4150024
-#define MSTPCR0		0xa4150030
-#define MSTPCR1		0xa4150034
-#define MSTPCR2		0xa4150038
 #define DLLFRQ		0xa4150050
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index bf64c78eee3..e5c63911403 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -32,9 +32,6 @@
 #define SCLKBCR		0xa415000c
 #define IRDACLKCR	0xa4150018
 #define PLLCR		0xa4150024
-#define MSTPCR0		0xa4150030
-#define MSTPCR1		0xa4150034
-#define MSTPCR2		0xa4150038
 #define DLLFRQ		0xa4150050
 
 /* Fixed 32 KHz root clock for RTC and Power Management purposes */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index ba24e38c9fc..34611d97378 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -33,9 +33,6 @@
 #define FCLKBCR		0xa415000c
 #define IRDACLKCR	0xa4150018
 #define PLLCR		0xa4150024
-#define MSTPCR0		0xa4150030
-#define MSTPCR1		0xa4150034
-#define MSTPCR2		0xa4150038
 #define SPUCLKCR	0xa415003c
 #define FLLFRQ		0xa4150050
 #define LSTATS		0xa4150060
-- 
cgit v1.2.3


From 4f3243117ad42b4d1faeecd452f7b24306fcfc4a Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 3 Aug 2009 04:52:03 +0000
Subject: sh: ms7724se: add 1280x720 lcdc output support

There was no big meaning in the support of SVGA,
but 720p support is necessary for ms7724se board.
So, this patch support 720p instead of SVGA.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 4fb7e48e284..957ed176ea2 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -39,7 +39,15 @@
  * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
  *                          1 : Digital monitor
  *                      b = 0 : VGA
- *                          1 : SVGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
  */
 
 /* Heartbeat */
@@ -546,15 +554,15 @@ static int __init devices_setup(void)
 	sh_eth_init();
 
 	if (sw & SW41_B) {
-		/* SVGA */
-		lcdc_info.ch[0].lcd_cfg.xres         = 800;
-		lcdc_info.ch[0].lcd_cfg.yres         = 600;
-		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
-		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
-		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
-		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
-		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
-		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+		/* 720p */
+		lcdc_info.ch[0].lcd_cfg.xres         = 1280;
+		lcdc_info.ch[0].lcd_cfg.yres         = 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 5;
 	} else {
 		/* VGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 640;
-- 
cgit v1.2.3


From edc67b29425b12312356fe9a92352ce6b7307c68 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 3 Aug 2009 04:52:24 +0000
Subject: sh: Add SH7724 DMAC support.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/dma-sh.h           | 1 +
 arch/sh/include/cpu-sh4/cpu/dma-sh4a.h | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
index 0c8f8e14622..68a5f4cb034 100644
--- a/arch/sh/include/asm/dma-sh.h
+++ b/arch/sh/include/asm/dma-sh.h
@@ -16,6 +16,7 @@
 
 /* DMAOR contorl: The DMAOR access size is different by CPU.*/
 #if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7724)	|| \
     defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define dmaor_read_reg(n) \
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
index 0ed5178fed6..f0886bc880e 100644
--- a/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh4a.h
@@ -16,7 +16,8 @@
 #define DMAE0_IRQ	38
 #define SH_DMAC_BASE0	0xFF608020
 #define SH_DMARS_BASE	0xFF609000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7724)
 #define DMTE0_IRQ	48	/* DMAC0A*/
 #define DMTE4_IRQ	40	/* DMAC0B */
 #define DMTE6_IRQ	42
-- 
cgit v1.2.3


From 9aaa74908b2117bcd560ab3ea8a9d6a491a77c28 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:47:17 +0000
Subject: sh: Runtime PM pdev hwblk

These patches extend struct platform device data for a bunch of
SuperH Mobile processors and embedded boards. The patches simply
add hardware block ids to on-chip platform devices. Platform
devices off chip (such as external ethernet controllers or flash
chips) are left out which gives them a special case hardware block
id of zero.

Upcoming Runtime PM code will make use of the hardware block id
to group devices together. The hardware block id can also be used
to extend the SuperH Mobile clock framework implementation.

This series of patches depend on the following:
"Driver Core: Add platform device arch data V3".

This patch adds a hwblk_id member to struct pdev_archdata. This member
should be used to point out on-chip hardware block id.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/device.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index 8688a88303e..783ecdc64e2 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -3,7 +3,9 @@
  *
  * This file is released under the GPLv2
  */
-#include <asm-generic/device.h>
+
+struct dev_archdata {
+};
 
 struct platform_device;
 /* allocate contiguous memory chunk and fill in struct resource */
@@ -12,3 +14,6 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
+struct pdev_archdata {
+	int hwblk_id;
+};
-- 
cgit v1.2.3


From f69d5782742e57d5f047ed13440bcf1b320cb074 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:47:27 +0000
Subject: sh: Runtime PM pdev hwblk - sh7722

Add hwblk_id to on-chip sh7722 platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 67b0d87fcb2..35097753456 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -17,6 +17,7 @@
 #include <linux/sh_timer.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <cpu/sh7722.h>
 
 static struct resource rtc_resources[] = {
 	[0] = {
@@ -46,6 +47,9 @@ static struct platform_device rtc_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(rtc_resources),
 	.resource	= rtc_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_RTC,
+	},
 };
 
 static struct m66592_platdata usbf_platdata = {
@@ -76,6 +80,9 @@ static struct platform_device usbf_device = {
 	},
 	.num_resources	= ARRAY_SIZE(usbf_resources),
 	.resource	= usbf_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USBF,
+	},
 };
 
 static struct resource iic_resources[] = {
@@ -97,6 +104,9 @@ static struct platform_device iic_device = {
 	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic_resources),
 	.resource       = iic_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC,
+	},
 };
 
 static struct uio_info vpu_platform_data = {
@@ -125,6 +135,9 @@ static struct platform_device vpu_device = {
 	},
 	.resource	= vpu_resources,
 	.num_resources	= ARRAY_SIZE(vpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VPU,
+	},
 };
 
 static struct uio_info veu_platform_data = {
@@ -153,6 +166,9 @@ static struct platform_device veu_device = {
 	},
 	.resource	= veu_resources,
 	.num_resources	= ARRAY_SIZE(veu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU,
+	},
 };
 
 static struct uio_info jpu_platform_data = {
@@ -181,6 +197,9 @@ static struct platform_device jpu_device = {
 	},
 	.resource	= jpu_resources,
 	.num_resources	= ARRAY_SIZE(jpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_JPU,
+	},
 };
 
 static struct sh_timer_config cmt_platform_data = {
@@ -213,6 +232,9 @@ static struct platform_device cmt_device = {
 	},
 	.resource	= cmt_resources,
 	.num_resources	= ARRAY_SIZE(cmt_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_CMT,
+	},
 };
 
 static struct sh_timer_config tmu0_platform_data = {
@@ -244,6 +266,9 @@ static struct platform_device tmu0_device = {
 	},
 	.resource	= tmu0_resources,
 	.num_resources	= ARRAY_SIZE(tmu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU,
+	},
 };
 
 static struct sh_timer_config tmu1_platform_data = {
@@ -275,6 +300,9 @@ static struct platform_device tmu1_device = {
 	},
 	.resource	= tmu1_resources,
 	.num_resources	= ARRAY_SIZE(tmu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU,
+	},
 };
 
 static struct sh_timer_config tmu2_platform_data = {
@@ -305,6 +333,9 @@ static struct platform_device tmu2_device = {
 	},
 	.resource	= tmu2_resources,
 	.num_resources	= ARRAY_SIZE(tmu2_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU,
+	},
 };
 
 static struct plat_sci_port sci_platform_data[] = {
-- 
cgit v1.2.3


From 2de63cf376585508f6942aaa7337848f8c4cdd7d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:47:35 +0000
Subject: sh: Runtime PM pdev hwblk - Migo-R

Add hwblk_id to Migo-R board specific on-chip sh7722
platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-migor/setup.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f70f4644deb..a508a0fa731 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -98,6 +98,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct mtd_partition migor_nor_flash_partitions[] =
@@ -292,6 +295,9 @@ static struct platform_device migor_lcdc_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static struct clk *camera_clk;
@@ -379,6 +385,9 @@ static struct platform_device migor_ceu_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn9_platform_data = {
-- 
cgit v1.2.3


From 66d9c51ac434615b0f0e864c0c9a81d7264ca3ef Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:47:44 +0000
Subject: sh: Runtime PM pdev hwblk - Solution Engine 7722

Add hwblk_id to Solution Engine 7722 board specific
on-chip sh7722 platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7722/setup.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index af84904ed86..36374078e52 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -22,6 +22,7 @@
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_keysc.h>
+#include <cpu/sh7722.h>
 
 /* Heartbeat */
 static struct heartbeat_data heartbeat_data = {
@@ -137,6 +138,9 @@ static struct platform_device sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct platform_device *se7722_devices[] __initdata = {
-- 
cgit v1.2.3


From 09d21f9c83c49afd04850b8701772c09954054e0 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:47:53 +0000
Subject: sh: Runtime PM pdev hwblk - sh7723

Add hwblk_id to on-chip sh7723 platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 40 ++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 26dc4d32325..4caa5a7ca86 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <cpu/sh7723.h>
 
 static struct uio_info vpu_platform_data = {
 	.name = "VPU5",
@@ -45,6 +46,9 @@ static struct platform_device vpu_device = {
 	},
 	.resource	= vpu_resources,
 	.num_resources	= ARRAY_SIZE(vpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VPU,
+	},
 };
 
 static struct uio_info veu0_platform_data = {
@@ -73,6 +77,9 @@ static struct platform_device veu0_device = {
 	},
 	.resource	= veu0_resources,
 	.num_resources	= ARRAY_SIZE(veu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU2H0,
+	},
 };
 
 static struct uio_info veu1_platform_data = {
@@ -101,6 +108,9 @@ static struct platform_device veu1_device = {
 	},
 	.resource	= veu1_resources,
 	.num_resources	= ARRAY_SIZE(veu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU2H1,
+	},
 };
 
 static struct sh_timer_config cmt_platform_data = {
@@ -133,6 +143,9 @@ static struct platform_device cmt_device = {
 	},
 	.resource	= cmt_resources,
 	.num_resources	= ARRAY_SIZE(cmt_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_CMT,
+	},
 };
 
 static struct sh_timer_config tmu0_platform_data = {
@@ -164,6 +177,9 @@ static struct platform_device tmu0_device = {
 	},
 	.resource	= tmu0_resources,
 	.num_resources	= ARRAY_SIZE(tmu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu1_platform_data = {
@@ -195,6 +211,9 @@ static struct platform_device tmu1_device = {
 	},
 	.resource	= tmu1_resources,
 	.num_resources	= ARRAY_SIZE(tmu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu2_platform_data = {
@@ -225,6 +244,9 @@ static struct platform_device tmu2_device = {
 	},
 	.resource	= tmu2_resources,
 	.num_resources	= ARRAY_SIZE(tmu2_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu3_platform_data = {
@@ -255,6 +277,9 @@ static struct platform_device tmu3_device = {
 	},
 	.resource	= tmu3_resources,
 	.num_resources	= ARRAY_SIZE(tmu3_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu4_platform_data = {
@@ -285,6 +310,9 @@ static struct platform_device tmu4_device = {
 	},
 	.resource	= tmu4_resources,
 	.num_resources	= ARRAY_SIZE(tmu4_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu5_platform_data = {
@@ -315,6 +343,9 @@ static struct platform_device tmu5_device = {
 	},
 	.resource	= tmu5_resources,
 	.num_resources	= ARRAY_SIZE(tmu5_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -395,6 +426,9 @@ static struct platform_device rtc_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(rtc_resources),
 	.resource	= rtc_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_RTC,
+	},
 };
 
 static struct r8a66597_platdata r8a66597_data = {
@@ -424,6 +458,9 @@ static struct platform_device sh7723_usb_host_device = {
 	},
 	.num_resources	= ARRAY_SIZE(sh7723_usb_host_resources),
 	.resource	= sh7723_usb_host_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USB,
+	},
 };
 
 static struct resource iic_resources[] = {
@@ -445,6 +482,9 @@ static struct platform_device iic_device = {
 	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic_resources),
 	.resource       = iic_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC,
+	},
 };
 
 static struct platform_device *sh7723_devices[] __initdata = {
-- 
cgit v1.2.3


From d3a6f6260a3fecd9a8e301fcf37d87ee70edca12 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:48:02 +0000
Subject: sh: Runtime PM pdev hwblk - AP325RXA

Add hwblk_id to AP325RXA board specific on-chip sh7723
platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7ffd1b4315b..07a54740d43 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -227,6 +227,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static void camera_power(int val)
@@ -377,6 +380,9 @@ static struct platform_device ceu_device = {
 	.dev		= {
 		.platform_data	= &sh_mobile_ceu_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU,
+	},
 };
 
 struct spi_gpio_platform_data sdcard_cn3_platform_data = {
-- 
cgit v1.2.3


From 593a0c898ac2f09f001d536f699966ec4bc1d25f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:48:11 +0000
Subject: sh: Runtime PM pdev hwblk - sh7724

Add hwblk_id to on-chip sh7724 platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 43 ++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index a04edaab9a2..f3851fd757e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <cpu/sh7724.h>
 
 /* Serial */
 static struct plat_sci_port sci_platform_data[] = {
@@ -103,6 +104,9 @@ static struct platform_device rtc_device = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(rtc_resources),
 	.resource	= rtc_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_RTC,
+	},
 };
 
 /* I2C0 */
@@ -125,6 +129,9 @@ static struct platform_device iic0_device = {
 	.id             = 0, /* "i2c0" clock */
 	.num_resources  = ARRAY_SIZE(iic0_resources),
 	.resource       = iic0_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC0,
+	},
 };
 
 /* I2C1 */
@@ -147,6 +154,9 @@ static struct platform_device iic1_device = {
 	.id             = 1, /* "i2c1" clock */
 	.num_resources  = ARRAY_SIZE(iic1_resources),
 	.resource       = iic1_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_IIC1,
+	},
 };
 
 /* VPU */
@@ -176,6 +186,9 @@ static struct platform_device vpu_device = {
 	},
 	.resource	= vpu_resources,
 	.num_resources	= ARRAY_SIZE(vpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VPU,
+	},
 };
 
 /* VEU0 */
@@ -205,6 +218,9 @@ static struct platform_device veu0_device = {
 	},
 	.resource	= veu0_resources,
 	.num_resources	= ARRAY_SIZE(veu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU0,
+	},
 };
 
 /* VEU1 */
@@ -234,6 +250,9 @@ static struct platform_device veu1_device = {
 	},
 	.resource	= veu1_resources,
 	.num_resources	= ARRAY_SIZE(veu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_VEU1,
+	},
 };
 
 static struct sh_timer_config cmt_platform_data = {
@@ -266,6 +285,9 @@ static struct platform_device cmt_device = {
 	},
 	.resource	= cmt_resources,
 	.num_resources	= ARRAY_SIZE(cmt_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_CMT,
+	},
 };
 
 static struct sh_timer_config tmu0_platform_data = {
@@ -297,6 +319,9 @@ static struct platform_device tmu0_device = {
 	},
 	.resource	= tmu0_resources,
 	.num_resources	= ARRAY_SIZE(tmu0_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu1_platform_data = {
@@ -328,6 +353,9 @@ static struct platform_device tmu1_device = {
 	},
 	.resource	= tmu1_resources,
 	.num_resources	= ARRAY_SIZE(tmu1_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 static struct sh_timer_config tmu2_platform_data = {
@@ -358,6 +386,9 @@ static struct platform_device tmu2_device = {
 	},
 	.resource	= tmu2_resources,
 	.num_resources	= ARRAY_SIZE(tmu2_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU0,
+	},
 };
 
 
@@ -389,6 +420,9 @@ static struct platform_device tmu3_device = {
 	},
 	.resource	= tmu3_resources,
 	.num_resources	= ARRAY_SIZE(tmu3_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu4_platform_data = {
@@ -419,6 +453,9 @@ static struct platform_device tmu4_device = {
 	},
 	.resource	= tmu4_resources,
 	.num_resources	= ARRAY_SIZE(tmu4_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 static struct sh_timer_config tmu5_platform_data = {
@@ -449,6 +486,9 @@ static struct platform_device tmu5_device = {
 	},
 	.resource	= tmu5_resources,
 	.num_resources	= ARRAY_SIZE(tmu5_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_TMU1,
+	},
 };
 
 /* JPU */
@@ -478,6 +518,9 @@ static struct platform_device jpu_device = {
 	},
 	.resource	= jpu_resources,
 	.num_resources	= ARRAY_SIZE(jpu_resources),
+	.archdata = {
+		.hwblk_id = HWBLK_JPU,
+	},
 };
 
 static struct platform_device *sh7724_devices[] __initdata = {
-- 
cgit v1.2.3


From 442c37534c6a46d8ed27144fb09818833edbd049 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:48:21 +0000
Subject: sh: Runtime PM pdev hwblk - kfr2r09

Add hwblk_id to kfr2r09 board specific on-chip sh7724
platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index bf5f8f8d3b5..0e9b39034df 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -95,6 +95,9 @@ static struct platform_device kfr2r09_sh_keysc_device = {
 	.dev	= {
 		.platform_data	= &kfr2r09_sh_keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 static struct platform_device *kfr2r09_devices[] __initdata = {
-- 
cgit v1.2.3


From df47cd096c8f54a5242e3a2ffb4525c804567eda Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 31 Jul 2009 07:48:29 +0000
Subject: sh: Runtime PM pdev hwblk - Solution Engine 7724

Add hwblk_id to Solution Engine 7724 board specific
on-chip sh7724 platform devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 4fb7e48e284..8de5ebc36b6 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -174,6 +174,9 @@ static struct platform_device lcdc_device = {
 	.dev		= {
 		.platform_data	= &lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 /* CEU0 */
@@ -205,6 +208,9 @@ static struct platform_device ceu0_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu0_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
 };
 
 /* CEU1 */
@@ -236,6 +242,9 @@ static struct platform_device ceu1_device = {
 	.dev	= {
 		.platform_data	= &sh_mobile_ceu1_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
 };
 
 /* KEYSC */
@@ -273,6 +282,9 @@ static struct platform_device keysc_device = {
 	.dev	= {
 		.platform_data	= &keysc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
 };
 
 /* SH Eth */
@@ -301,6 +313,9 @@ static struct platform_device sh_eth_device = {
 	},
 	.num_resources = ARRAY_SIZE(sh_eth_resources),
 	.resource = sh_eth_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_ETHER,
+	},
 };
 
 static struct r8a66597_platdata sh7724_usb0_host_data = {
@@ -330,6 +345,9 @@ static struct platform_device sh7724_usb0_host_device = {
 	},
 	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
 	.resource	= sh7724_usb0_host_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_USB0,
+	},
 };
 
 static struct platform_device *ms7724se_devices[] __initdata = {
-- 
cgit v1.2.3


From 11d82905e0159c07fe2d1bfe5e7d80e4cea333ce Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 15:54:33 +0900
Subject: sh: Fix up early printk build error.

Missing endif in the early printk case, fix it up..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/early_printk.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 64f2746baf9..81a46145ffa 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -222,6 +222,7 @@ static int __init setup_early_printk(char *buf)
 #if !defined(CONFIG_SH_STANDARD_BIOS)
 #if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SH3)
 		scif_sercon_init(buf + 6);
+#endif
 #endif
 	}
 #endif
-- 
cgit v1.2.3


From 700487c158163f14e6ff10de770b565c1c993c69 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 15:57:44 +0900
Subject: sh: Add a PG_dcache_dirty sanity check in kmap_coherent().

This plugs in a BUG_ON() in kmap_coherent() for PG_dcache_dirty pages
to catch when things go horribly wrong. Copied from the MIPS
implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pg-mmu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
index 8602f68af4c..32351206edd 100644
--- a/arch/sh/mm/pg-mmu.c
+++ b/arch/sh/mm/pg-mmu.c
@@ -37,6 +37,8 @@ static inline void *kmap_coherent(struct page *page, unsigned long addr)
 	unsigned long vaddr, flags;
 	pte_t pte;
 
+	BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+
 	inc_preempt_count();
 
 	idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
-- 
cgit v1.2.3


From 222db3e5f21fca563f5f692e000afcc01cb4395c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 15:59:15 +0900
Subject: sh: Bring kmap_coherent() out-of-line.

kmap_coherent() has gotten too big to leave as an inline, so we
bring it out-of-line.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pg-mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
index 32351206edd..e5c5122f4d6 100644
--- a/arch/sh/mm/pg-mmu.c
+++ b/arch/sh/mm/pg-mmu.c
@@ -31,7 +31,7 @@ void __init kmap_coherent_init(void)
 #endif
 }
 
-static inline void *kmap_coherent(struct page *page, unsigned long addr)
+static void *kmap_coherent(struct page *page, unsigned long addr)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr, flags;
-- 
cgit v1.2.3


From b5eb10ae901fa797c19accb684825f0e36ecbe0f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 16:00:36 +0900
Subject: sh: Drop unused arguments for kunmap_coherent().

kunmap_coherent() doesn't do anything with its arguments, so just kill
them off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pg-mmu.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
index e5c5122f4d6..a9ede7bae52 100644
--- a/arch/sh/mm/pg-mmu.c
+++ b/arch/sh/mm/pg-mmu.c
@@ -56,7 +56,7 @@ static void *kmap_coherent(struct page *page, unsigned long addr)
 	return (void *)vaddr;
 }
 
-static inline void kunmap_coherent(struct page *page)
+static inline void kunmap_coherent(void)
 {
 	dec_preempt_count();
 	preempt_check_resched();
@@ -70,7 +70,7 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 	    !test_bit(PG_dcache_dirty, &page->flags)) {
 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(vto, src, len);
-		kunmap_coherent(vto);
+		kunmap_coherent();
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
@@ -89,7 +89,7 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 	    !test_bit(PG_dcache_dirty, &page->flags)) {
 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(dst, vfrom, len);
-		kunmap_coherent(vfrom);
+		kunmap_coherent();
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
@@ -108,7 +108,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 	    !test_bit(PG_dcache_dirty, &from->flags)) {
 		vfrom = kmap_coherent(from, vaddr);
 		copy_page(vto, vfrom);
-		kunmap_coherent(vfrom);
+		kunmap_coherent();
 	} else {
 		vfrom = kmap_atomic(from, KM_USER0);
 		copy_page(vto, vfrom);
-- 
cgit v1.2.3


From c0fe478dbb14fd32e71d1383dbe302b54ce94134 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 16:02:43 +0900
Subject: sh: Provide __flush_anon_page().

This provides a __flush_anon_page() that handles both the aliasing and
non-aliasing cases. This fixes up some crashes with heavy
get_user_pages() users.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h | 14 ++++++++++++++
 arch/sh/mm/pg-mmu.c              | 17 +++++++++++++++++
 2 files changed, 31 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 4c85d55847c..5dffbd126e4 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_SH_CACHEFLUSH_H
 #define __ASM_SH_CACHEFLUSH_H
 
+#include <linux/mm.h>
+
 #ifdef __KERNEL__
 
 #ifdef CONFIG_CACHE_OFF
@@ -43,6 +45,18 @@ extern void __flush_purge_region(void *start, int size);
 extern void __flush_invalidate_region(void *start, int size);
 #endif
 
+#ifdef CONFIG_MMU
+#define ARCH_HAS_FLUSH_ANON_PAGE
+extern void __flush_anon_page(struct page *page, unsigned long);
+
+static inline void flush_anon_page(struct vm_area_struct *vma,
+				   struct page *page, unsigned long vmaddr)
+{
+	if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
+		__flush_anon_page(page, vmaddr);
+}
+#endif
+
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
 static inline void flush_kernel_dcache_page(struct page *page)
 {
diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
index a9ede7bae52..027c4d83fb8 100644
--- a/arch/sh/mm/pg-mmu.c
+++ b/arch/sh/mm/pg-mmu.c
@@ -157,3 +157,20 @@ void __update_cache(struct vm_area_struct *vma,
 		}
 	}
 }
+
+void __flush_anon_page(struct page *page, unsigned long vmaddr)
+{
+	unsigned long addr = (unsigned long) page_address(page);
+
+	if (pages_do_alias(addr, vmaddr)) {
+		if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+		    !test_bit(PG_dcache_dirty, &page->flags)) {
+			void *kaddr;
+
+			kaddr = kmap_coherent(page, vmaddr);
+			__flush_wback_region((void *)kaddr, PAGE_SIZE);
+			kunmap_coherent();
+		} else
+			__flush_wback_region((void *)addr, PAGE_SIZE);
+	}
+}
-- 
cgit v1.2.3


From c7914834ef3b8a396b7e82ea34ac07cdcfe6f868 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 17:14:39 +0900
Subject: sh: Tidy up NEFF-based sign extension for SH-5.

This consolidates all of the NEFF-based sign extension for SH-5.
In the future the other SH code will need to make use of this as well,
so make it generic in preparation for more 32/64 consolidation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/pgtable.h |  6 ++++++
 arch/sh/kernel/process_64.c   | 24 ++++++++++--------------
 arch/sh/kernel/signal_64.c    | 38 +++++++++++++-------------------------
 arch/sh/mm/fault_64.c         | 11 +----------
 arch/sh/mm/tlb-sh5.c          | 21 +++++----------------
 arch/sh/mm/tlbflush_64.c      |  2 +-
 6 files changed, 36 insertions(+), 66 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index 43ef3e99fdd..3cd7127af95 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -36,6 +36,12 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define	NEFF_SIGN	(1LL << (NEFF - 1))
 #define	NEFF_MASK	(-1LL << NEFF)
 
+static inline unsigned long long neff_sign_extend(unsigned long val)
+{
+	unsigned long long extended = val;
+	return (extended & NEFF_SIGN) ? (extended | NEFF_MASK) : extended;
+}
+
 #ifdef CONFIG_29BIT
 #define NPHYS		29
 #else
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 24de7421494..1192398ef58 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -425,7 +425,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		struct task_struct *p, struct pt_regs *regs)
 {
 	struct pt_regs *childregs;
-	unsigned long long se;			/* Sign extension */
 
 #ifdef CONFIG_SH_FPU
 	if(last_task_used_math == current) {
@@ -441,11 +440,19 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 
 	*childregs = *regs;
 
+	/*
+	 * Sign extend the edited stack.
+	 * Note that thread.pc and thread.pc will stay
+	 * 32-bit wide and context switch must take care
+	 * of NEFF sign extension.
+	 */
 	if (user_mode(regs)) {
-		childregs->regs[15] = usp;
+		childregs->regs[15] = neff_sign_extend(usp);
 		p->thread.uregs = childregs;
 	} else {
-		childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE;
+		childregs->regs[15] =
+			neff_sign_extend((unsigned long)task_stack_page(p) +
+					 THREAD_SIZE);
 	}
 
 	childregs->regs[9] = 0; /* Set return value for child */
@@ -454,17 +461,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	p->thread.sp = (unsigned long) childregs;
 	p->thread.pc = (unsigned long) ret_from_fork;
 
-	/*
-	 * Sign extend the edited stack.
-         * Note that thread.pc and thread.pc will stay
-	 * 32-bit wide and context switch must take care
-	 * of NEFF sign extension.
-	 */
-
-	se = childregs->regs[15];
-	se = (se & NEFF_SIGN) ? (se | NEFF_MASK) : se;
-	childregs->regs[15] = se;
-
 	return 0;
 }
 
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 0663a0ee602..026fd1cfe17 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -561,13 +561,11 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1;
-
 		/*
 		 * On SH5 all edited pointers are subject to NEFF
 		 */
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			ka->sa.sa_restorer | 0x1);
 	} else {
 		/*
 		 * Different approach on SH5.
@@ -580,9 +578,8 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 		 * . being code, linker turns ShMedia bit on, always
 		 *   dereference index -1.
 		 */
-		DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			frame->retcode | 0x01);
 
 		if (__copy_to_user(frame->retcode,
 			(void *)((unsigned long)sa_default_restorer & (~1)), 16) != 0)
@@ -596,9 +593,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	 * Set up registers for signal handler.
 	 * All edited pointers are subject to NEFF.
 	 */
-	regs->regs[REG_SP] = (unsigned long) frame;
-	regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
-		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
 	regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
 
         /* FIXME:
@@ -613,8 +608,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
 	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc;
 
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-	regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc;
+	regs->pc = neff_sign_extend((unsigned long)ka->sa.sa_handler);
 
 	set_fs(USER_DS);
 
@@ -676,13 +670,11 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1;
-
 		/*
 		 * On SH5 all edited pointers are subject to NEFF
 		 */
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			ka->sa.sa_restorer | 0x1);
 	} else {
 		/*
 		 * Different approach on SH5.
@@ -695,15 +687,14 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		 * . being code, linker turns ShMedia bit on, always
 		 *   dereference index -1.
 		 */
-
-		DEREF_REG_PR = (unsigned long) frame->retcode | 0x01;
-		DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ?
-			(DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR;
+		DEREF_REG_PR = neff_sign_extend((unsigned long)
+			frame->retcode | 0x01);
 
 		if (__copy_to_user(frame->retcode,
 			(void *)((unsigned long)sa_default_rt_restorer & (~1)), 16) != 0)
 			goto give_sigsegv;
 
+		/* Cohere the trampoline with the I-cache. */
 		flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15);
 	}
 
@@ -711,14 +702,11 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 * Set up registers for signal handler.
 	 * All edited pointers are subject to NEFF.
 	 */
-	regs->regs[REG_SP] = (unsigned long) frame;
-	regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ?
-		 (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP];
+	regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame);
 	regs->regs[REG_ARG1] = signal; /* Arg for signal handler */
 	regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info;
 	regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
-	regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc;
+	regs->pc = neff_sign_extend((unsigned long)ka->sa.sa_handler);
 
 	set_fs(USER_DS);
 
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index bd63b961b2a..2b356cec248 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -56,16 +56,7 @@ inline void __do_tlb_refill(unsigned long address,
 	/*
 	 * Set PTEH register
 	 */
-	pteh = address & MMU_VPN_MASK;
-
-	/* Sign extend based on neff. */
-#if (NEFF == 32)
-	/* Faster sign extension */
-	pteh = (unsigned long long)(signed long long)(signed long)pteh;
-#else
-	/* General case */
-	pteh = (pteh & NEFF_SIGN) ? (pteh | NEFF_MASK) : pteh;
-#endif
+	pteh = neff_sign_extend(address & MMU_VPN_MASK);
 
 	/* Set the ASID. */
 	pteh |= get_asid() << PTEH_ASID_SHIFT;
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index dae131243bc..fdb64e41ec5 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -117,26 +117,15 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry)
  * Load up a virtual<->physical translation for @eaddr<->@paddr in the
  * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry).
  */
-inline void sh64_setup_tlb_slot(unsigned long long config_addr,
-				unsigned long eaddr,
-				unsigned long asid,
-				unsigned long paddr)
+void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
+			 unsigned long asid, unsigned long paddr)
 {
 	unsigned long long pteh, ptel;
 
-	/* Sign extension */
-#if (NEFF == 32)
-	pteh = (unsigned long long)(signed long long)(signed long) eaddr;
-#else
-#error "Can't sign extend more than 32 bits yet"
-#endif
+	pteh = neff_sign_extend(eaddr);
 	pteh &= PAGE_MASK;
 	pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
-#if (NEFF == 32)
-	ptel = (unsigned long long)(signed long long)(signed long) paddr;
-#else
-#error "Can't sign extend more than 32 bits yet"
-#endif
+	ptel = neff_sign_extend(paddr);
 	ptel &= PAGE_MASK;
 	ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE);
 
@@ -152,5 +141,5 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr,
  *
  * Teardown any existing mapping in the TLB slot @config_addr.
  */
-inline void sh64_teardown_tlb_slot(unsigned long long config_addr)
+void sh64_teardown_tlb_slot(unsigned long long config_addr)
 	__attribute__ ((alias("__flush_tlb_slot")));
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index f2e44e9ffb7..fa5a95a062d 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -337,7 +337,7 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	/*
 	 * Sign-extend based on neff.
 	 */
-	lpage = (page & NEFF_SIGN) ? (page | NEFF_MASK) : page;
+	lpage = neff_sign_extend(page);
 	match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID;
 	match |= lpage;
 
-- 
cgit v1.2.3


From d14d751ff9234595639a16e53b3cf0c575946bde Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 17:17:00 +0900
Subject: sh64: Kill off special clear_page() implementation.

This can use the now generic clear_page() implementation, which is backed
by the sh64 optimized memset routine. This also fixes up the case where
PAGE_SIZE != 4kB.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sh_ksyms_64.c |  1 -
 arch/sh/lib64/Makefile       |  2 +-
 arch/sh/lib64/clear_page.S   | 54 --------------------------------------------
 3 files changed, 1 insertion(+), 56 deletions(-)
 delete mode 100644 arch/sh/lib64/clear_page.S

(limited to 'arch')

diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index f5bd156ea50..f96c95c07c4 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -52,7 +52,6 @@ EXPORT_SYMBOL(__get_user_asm_l);
 EXPORT_SYMBOL(__get_user_asm_q);
 EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);
diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile
index 334bb2da36e..1fee75aa1f9 100644
--- a/arch/sh/lib64/Makefile
+++ b/arch/sh/lib64/Makefile
@@ -11,7 +11,7 @@
 
 # Panic should really be compiled as PIC
 lib-y  := udelay.o dbg.o panic.o memcpy.o memset.o \
-	  copy_user_memcpy.o copy_page.o clear_page.o strcpy.o strlen.o
+	  copy_user_memcpy.o copy_page.o strcpy.o strlen.o
 
 # Extracted from libgcc
 lib-y	+= udivsi3.o udivdi3.o sdivsi3.o
diff --git a/arch/sh/lib64/clear_page.S b/arch/sh/lib64/clear_page.S
deleted file mode 100644
index 007ab48ecc1..00000000000
--- a/arch/sh/lib64/clear_page.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-   Copyright 2003 Richard Curnow, SuperH (UK) Ltd.
-
-   This file is subject to the terms and conditions of the GNU General Public
-   License.  See the file "COPYING" in the main directory of this archive
-   for more details.
-
-   Tight version of memset for the case of just clearing a page.  It turns out
-   that having the alloco's spaced out slightly due to the increment/branch
-   pair causes them to contend less for access to the cache.  Similarly,
-   keeping the stores apart from the allocos causes less contention.  => Do two
-   separate loops.  Do multiple stores per loop to amortise the
-   increment/branch cost a little.
-
-   Parameters:
-   r2 : source effective address (start of page)
-
-   Always clears 4096 bytes.
-
-   Note : alloco guarded by synco to avoid TAKum03020 erratum
-
-*/
-
-	.section .text..SHmedia32,"ax"
-	.little
-
-	.balign 8
-	.global clear_page
-clear_page:
-	pta/l 1f, tr1
-	pta/l 2f, tr2
-	ptabs/l r18, tr0
-
-	movi 4096, r7
-	add  r2, r7, r7
-	add  r2, r63, r6
-1:
-	alloco r6, 0
-	synco	! TAKum03020
-	addi	r6, 32, r6
-	bgt/l	r7, r6, tr1
-
-	add  r2, r63, r6
-2:
-	st.q  r6,   0, r63
-	st.q  r6,   8, r63
-	st.q  r6,  16, r63
-	st.q  r6,  24, r63
-	addi r6, 32, r6
-	bgt/l r7, r6, tr2
-
-	blink tr0, r63
-
-
-- 
cgit v1.2.3


From 817425275271f2514f0dc6952182aa057ce80973 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 18:06:01 +0900
Subject: sh: Split out SH-4 __flush_xxx_region() ops.

This splits out the SH-4 __flush_xxx_region() functions and defines them
as weak symbols. This allows us to provide optimized versions without
having to ifdef cache-sh4.c to death.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Makefile_32 |  2 +-
 arch/sh/mm/cache-sh4.c | 60 -----------------------------------------------
 arch/sh/mm/flush-sh4.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 64 insertions(+), 61 deletions(-)
 create mode 100644 arch/sh/mm/flush-sh4.c

(limited to 'arch')

diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index 62e280734dc..17b02522214 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -8,7 +8,7 @@ ifndef CONFIG_CACHE_OFF
 cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
 cache-$(CONFIG_CPU_SH2A)	:= cache-sh2a.o
 cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
-cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o
+cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
 cache-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 endif
 
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index c3a09b27f8d..dfc1d037947 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -118,66 +118,6 @@ void __init p3_cache_init(void)
 	emit_cache_params();
 }
 
-/*
- * Write back the dirty D-caches, but not invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-void __flush_wback_region(void *start, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
-		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbwb	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
-	}
-}
-
-/*
- * Write back the dirty D-caches and invalidate them.
- *
- * START: Virtual Address (U0, P1, or P3)
- * SIZE: Size of the region.
- */
-void __flush_purge_region(void *start, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
-		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbp	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
-	}
-}
-
-/*
- * No write back please
- */
-void __flush_invalidate_region(void *start, int size)
-{
-	unsigned long v;
-	unsigned long begin, end;
-
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
-		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbi	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
-	}
-}
-
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
new file mode 100644
index 00000000000..e6d918f6ec0
--- /dev/null
+++ b/arch/sh/mm/flush-sh4.c
@@ -0,0 +1,63 @@
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Write back the dirty D-caches, but not invalidate them.
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+void __weak __flush_wback_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		asm volatile("ocbwb	%0"
+			     : /* no output */
+			     : "m" (__m(v)));
+	}
+}
+
+/*
+ * Write back the dirty D-caches and invalidate them.
+ *
+ * START: Virtual Address (U0, P1, or P3)
+ * SIZE: Size of the region.
+ */
+void __weak __flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		asm volatile("ocbp	%0"
+			     : /* no output */
+			     : "m" (__m(v)));
+	}
+}
+
+/*
+ * No write back please
+ */
+void __weak __flush_invalidate_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		asm volatile("ocbi	%0"
+			     : /* no output */
+			     : "m" (__m(v)));
+	}
+}
-- 
cgit v1.2.3


From 0837f52463583f76670ab2350e0f1541cb0351f5 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 4 Aug 2009 18:09:54 +0900
Subject: sh: Partially unroll the SH-4 __flush_xxx_region() flushers.

This does a bit of unrolling for the SH-4 region flushers.

Based on an earlier patch by SUGIOKA Toshinobu.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/flush-sh4.c | 104 +++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 83 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
index e6d918f6ec0..edefc53891a 100644
--- a/arch/sh/mm/flush-sh4.c
+++ b/arch/sh/mm/flush-sh4.c
@@ -10,16 +10,37 @@
  */
 void __weak __flush_wback_region(void *start, int size)
 {
-	unsigned long v;
-	unsigned long begin, end;
+	unsigned long v, cnt, end;
 
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	v = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbwb	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+
+	while (cnt) {
+		asm volatile("ocbwb	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		cnt--;
 	}
 }
 
@@ -31,16 +52,36 @@ void __weak __flush_wback_region(void *start, int size)
  */
 void __weak __flush_purge_region(void *start, int size)
 {
-	unsigned long v;
-	unsigned long begin, end;
+	unsigned long v, cnt, end;
 
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	v = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbp	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+	while (cnt) {
+		asm volatile("ocbp	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		cnt--;
 	}
 }
 
@@ -49,15 +90,36 @@ void __weak __flush_purge_region(void *start, int size)
  */
 void __weak __flush_invalidate_region(void *start, int size)
 {
-	unsigned long v;
-	unsigned long begin, end;
+	unsigned long v, cnt, end;
 
-	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	v = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		asm volatile("ocbi	%0"
-			     : /* no output */
-			     : "m" (__m(v)));
+	cnt = (end - v) / L1_CACHE_BYTES;
+
+	while (cnt >= 8) {
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		cnt -= 8;
+	}
+
+	while (cnt) {
+		asm volatile("ocbi	@%0" : : "r" (v));
+		v += L1_CACHE_BYTES;
+		cnt--;
 	}
 }
-- 
cgit v1.2.3


From c7bd0414d681706a32105895cae20fb9090db52e Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Thu, 23 Jul 2009 20:56:27 +0200
Subject: x86: Simplify the Makefile in a minor way through use of cc-ifversion

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
LKML-Reference: <200907232056.28635.elendil@planet.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1b68659c41b..1f3851a626d 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -32,8 +32,8 @@ ifeq ($(CONFIG_X86_32),y)
 
         # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
         # a lot more stack due to the lack of sharing of stacklots:
-        KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
-                echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+        KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \
+				$(call cc-option,-fno-unit-at-a-time))
 
         # CPU-specific tuning. Anything which can be shared with UML should go here.
         include $(srctree)/arch/x86/Makefile_32.cpu
-- 
cgit v1.2.3


From 54a0bf3c2cad3fd118ea725f26a493aece6ea01d Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 4 Aug 2009 15:52:38 +0200
Subject: Revert "x86: oprofile/op_model_amd.c set return values for
 op_amd_handle_ibs()"

This reverts commit 21e70878215f620fe99ea7d7c74bc641aeec932f.

Instead Andrew's patch will be applied he posted at the same time.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 827beecb67a..37d19c768d5 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -195,7 +195,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	struct op_entry entry;
 
 	if (!has_ibs)
-		return 0;
+		return 1;
 
 	if (ibs_config.fetch_enabled) {
 		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
@@ -277,10 +277,7 @@ static void op_amd_stop_ibs(void)
 #else
 
 static inline int op_amd_handle_ibs(struct pt_regs * const regs,
-				    struct op_msrs const * const msrs)
-{
-	return 0;
-}
+				    struct op_msrs const * const msrs) { }
 static inline void op_amd_start_ibs(void) { }
 static inline void op_amd_stop_ibs(void) { }
 
-- 
cgit v1.2.3


From 4680e64a88c4ce2c4e736dade99233e3def13fa7 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Tue, 23 Jun 2009 12:36:08 -0700
Subject: arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type

arch/x86/oprofile/op_model_amd.c: In function 'op_amd_handle_ibs':
arch/x86/oprofile/op_model_amd.c:217: warning: no return statement in function returning non-void

Fix this by making op_amd_handle_ibs() return void.

Cc: Robert Richter <robert.richter@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 37d19c768d5..39686c29f03 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -187,7 +187,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 #ifdef CONFIG_OPROFILE_IBS
 
-static inline int
+static inline void
 op_amd_handle_ibs(struct pt_regs * const regs,
 		  struct op_msrs const * const msrs)
 {
@@ -195,7 +195,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	struct op_entry entry;
 
 	if (!has_ibs)
-		return 1;
+		return;
 
 	if (ibs_config.fetch_enabled) {
 		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
@@ -241,8 +241,6 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
 		}
 	}
-
-	return 1;
 }
 
 static inline void op_amd_start_ibs(void)
@@ -276,7 +274,7 @@ static void op_amd_stop_ibs(void)
 
 #else
 
-static inline int op_amd_handle_ibs(struct pt_regs * const regs,
+static inline void op_amd_handle_ibs(struct pt_regs * const regs,
 				    struct op_msrs const * const msrs) { }
 static inline void op_amd_start_ibs(void) { }
 static inline void op_amd_stop_ibs(void) { }
-- 
cgit v1.2.3


From 6c7184b77464261b7d55583a48accbd1350923a3 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Mon, 27 Jul 2009 09:35:07 -0500
Subject: x86, UV: Handle missing blade-local memory correctly

UV blades may not have any blade-local memory. Add a field
(nid) to the UV blade structure to indicates whether the node
has local memory. This is needed by the GRU driver (pushed
separately).

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
LKML-Reference: <20090727143507.GA7006@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uv/uv_hub.h   | 7 +++++++
 arch/x86/kernel/apic/x2apic_uv_x.c | 5 +++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 341070f7ad5..a6dde059e02 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -327,6 +327,7 @@ struct uv_blade_info {
 	unsigned short	nr_possible_cpus;
 	unsigned short	nr_online_cpus;
 	unsigned short	pnode;
+	short		memory_nid;
 };
 extern struct uv_blade_info *uv_blade_info;
 extern short *uv_node_to_blade;
@@ -363,6 +364,12 @@ static inline int uv_blade_to_pnode(int bid)
 	return uv_blade_info[bid].pnode;
 }
 
+/* Nid of memory node on blade. -1 if no blade-local memory */
+static inline int uv_blade_to_memory_nid(int bid)
+{
+	return uv_blade_info[bid].memory_nid;
+}
+
 /* Determine the number of possible cpus on a blade */
 static inline int uv_blade_nr_possible_cpus(int bid)
 {
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 096d19aea2f..ad3f0a984ca 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -591,6 +591,8 @@ void __init uv_system_init(void)
 	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
 	uv_blade_info = kmalloc(bytes, GFP_KERNEL);
 	BUG_ON(!uv_blade_info);
+	for (blade = 0; blade < uv_num_possible_blades(); blade++)
+		uv_blade_info[blade].memory_nid = -1;
 
 	get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
 
@@ -629,6 +631,9 @@ void __init uv_system_init(void)
 		lcpu = uv_blade_info[blade].nr_possible_cpus;
 		uv_blade_info[blade].nr_possible_cpus++;
 
+		/* Any node on the blade, else will contain -1. */
+		uv_blade_info[blade].memory_nid = nid;
+
 		uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
 		uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
 		uv_cpu_hub_info(cpu)->m_val = m_val;
-- 
cgit v1.2.3


From cc5e4fa1bd4d2f56da07f9092281afdcd2374ab9 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Mon, 27 Jul 2009 09:36:56 -0500
Subject: x86, UV: Delete mapping of MMR rangs mapped by BIOS

The UV BIOS has added additional MMR ranges that are mapped via
EFI virtual mode mappings. These ranges should be deleted from
ranges mapped by uv_system_init().

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
LKML-Reference: <20090727143656.GA7698@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 31 +------------------------------
 1 file changed, 1 insertion(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index ad3f0a984ca..445c210daf8 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -362,12 +362,6 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 	BUG();
 }
 
-static __init void map_low_mmrs(void)
-{
-	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
-	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
-}
-
 enum map_type {map_wb, map_uc};
 
 static __init void map_high(char *id, unsigned long base, int shift,
@@ -395,26 +389,6 @@ static __init void map_gru_high(int max_pnode)
 		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
 }
 
-static __init void map_config_high(int max_pnode)
-{
-	union uvh_rh_gam_cfg_overlay_config_mmr_u cfg;
-	int shift = UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	cfg.v = uv_read_local_mmr(UVH_RH_GAM_CFG_OVERLAY_CONFIG_MMR);
-	if (cfg.s.enable)
-		map_high("CONFIG", cfg.s.base, shift, max_pnode, map_uc);
-}
-
-static __init void map_mmr_high(int max_pnode)
-{
-	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
-	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
-
-	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
-	if (mmr.s.enable)
-		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
-}
-
 static __init void map_mmioh_high(int max_pnode)
 {
 	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
@@ -566,8 +540,6 @@ void __init uv_system_init(void)
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask;
 
-	map_low_mmrs();
-
 	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
@@ -667,11 +639,10 @@ void __init uv_system_init(void)
 		pnode = (paddr >> m_val) & pnode_mask;
 		blade = boot_pnode_to_blade(pnode);
 		uv_node_to_blade[nid] = blade;
+		max_pnode = max(pnode, max_pnode);
 	}
 
 	map_gru_high(max_pnode);
-	map_mmr_high(max_pnode);
-	map_config_high(max_pnode);
 	map_mmioh_high(max_pnode);
 
 	uv_cpu_init();
-- 
cgit v1.2.3


From 67e83f309ed0baaf01a2c956b5174905bcdc1242 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Mon, 27 Jul 2009 09:38:08 -0500
Subject: x86, UV: Fix macros for accessing large node numbers

The UV chipset automatically supplies the upper bits on nodes
being referenced by MMR accesses. These bit can be deleted from
the hub addressing macros.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090727143808.GA8076@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uv/uv_hub.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index a6dde059e02..77a68505419 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -175,7 +175,7 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 #define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
 
 #define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
-	((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+	(((unsigned long)(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
 
 #define UV_APIC_PNODE_SHIFT	6
 
-- 
cgit v1.2.3


From c5997fa8d7aca3c9876a6ff71bacf27c41095ce9 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Mon, 27 Jul 2009 09:38:56 -0500
Subject: x86, UV: Fix UV apic mode

Change SGI UV default apicid mode to "physical". This is
required to match settings in the UV hub chip.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090727143856.GA8905@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 445c210daf8..832e908adcb 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -261,7 +261,7 @@ struct apic apic_x2apic_uv_x = {
 	.apic_id_registered		= uv_apic_id_registered,
 
 	.irq_delivery_mode		= dest_Fixed,
-	.irq_dest_mode			= 1, /* logical */
+	.irq_dest_mode			= 0, /* physical */
 
 	.target_cpus			= uv_target_cpus,
 	.disable_esr			= 0,
-- 
cgit v1.2.3


From d8c7eb34c2db6268909ae8c3958be63bde254292 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 25 Jul 2009 03:23:09 -0700
Subject: x86: Don't use current_cpu_data in x2apic phys_pkg_id

One system has socket 1 come up as BSP.

kexeced kernel reports BSP as:

[    1.524550] Initializing cgroup subsys cpuacct
[    1.536064] initial_apicid:20
[    1.537135] ht_mask_width:1
[    1.538128] core_select_mask:f
[    1.539126] core_plus_mask_width:5
[    1.558479] CPU: Physical Processor ID: 0
[    1.559501] CPU: Processor Core ID: 0
[    1.560539] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.579098] CPU: L2 cache: 256K
[    1.580085] CPU: L3 cache: 24576K
[    1.581108] CPU 0/0x20 -> Node 0
[    1.596193] CPU 0 microcode level: 0xffff0008

It doesn't have correct physical processor id and will get an
error:

[   38.840859] CPU0 attaching sched-domain:
[   38.848287]  domain 0: span 0,8,72 level SIBLING
[   38.851151]   groups: 0 8 72
[   38.858137]   domain 1: span 0,8-15,72-79 level MC
[   38.868944]    groups: 0,8,72 9,73 10,74 11,75 12,76 13,77 14,78 15,79
[   38.881383] ERROR: parent span is not a superset of domain->span
[   38.890724]    domain 2: span 0-7,64-71 level CPU
[   38.899237] ERROR: domain->groups does not contain CPU0
[   38.909229]     groups: 8-15,72-79
[   38.912547] ERROR: groups don't span domain->span
[   38.919665]     domain 3: span 0-127 level NODE
[   38.930739]      groups: 0-7,64-71 8-15,72-79 16-23,80-87 24-31,88-95 32-39,96-103 40-47,104-111 48-55,112-119 56-63,120-127

it turns out: we can not use current_cpu_data in phys_pgd_id
for x2apic.

identify_boot_cpu() is called by check_bugs() before
smp_prepare_cpus() and till smp_prepare_cpus() current_cpu_data
for bsp is assigned with boot_cpu_data.

Just make phys_pkg_id for x2apic is aligned to xapic.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A6ADD0D.10002@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_cluster.c | 2 +-
 arch/x86/kernel/apic/x2apic_phys.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 8e4cbb255c3..2ed4e2bb3b3 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -170,7 +170,7 @@ static unsigned long set_apic_id(unsigned int id)
 
 static int x2apic_cluster_phys_pkg_id(int initial_apicid, int index_msb)
 {
-	return current_cpu_data.initial_apicid >> index_msb;
+	return initial_apicid >> index_msb;
 }
 
 static void x2apic_send_IPI_self(int vector)
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index a284359627e..0b631c6a2e0 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -162,7 +162,7 @@ static unsigned long set_apic_id(unsigned int id)
 
 static int x2apic_phys_pkg_id(int initial_apicid, int index_msb)
 {
-	return current_cpu_data.initial_apicid >> index_msb;
+	return initial_apicid >> index_msb;
 }
 
 static void x2apic_send_IPI_self(int vector)
-- 
cgit v1.2.3


From 6abf65510944d33b47575d151c6b318993c8d2b5 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Thu, 30 Jul 2009 16:49:30 +0100
Subject: x86, 32-bit: Fix double accounting in reserve_top_address()

With VMALLOC_END included in the calculation of MAXMEM (as of
2.6.28) it is no longer correct to also bump __VMALLOC_RESERVE
in reserve_top_address(). Doing so results in needlessly small
lowmem.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4A71DD2A020000780000D482@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pgtable.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index af8f9650058..ed34f5e3599 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -329,7 +329,6 @@ void __init reserve_top_address(unsigned long reserve)
 	printk(KERN_INFO "Reserving virtual address space above 0x%08x\n",
 	       (int)-reserve);
 	__FIXADDR_TOP = -reserve - PAGE_SIZE;
-	__VMALLOC_RESERVE += reserve;
 #endif
 }
 
-- 
cgit v1.2.3


From 2a5ef41661b56cf4eee042a6967c4e14b63e8eac Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Mon, 20 Jul 2009 09:28:41 -0500
Subject: x86, UV: Complete IRQ interrupt migration in arch_enable_uv_irq()

In uv_setup_irq(), the call to create_irq() initially assigns
IRQ vectors to cpu 0. The subsequent call to
assign_irq_vector() in arch_enable_uv_irq() migrates the IRQ to
another cpu and frees the cpu 0 vector - at least it will be
freed as soon as the "IRQ move" completes.

arch_enable_uv_irq() needs to send a cleanup IPI to complete
the IRQ move. Otherwise, assignment of GRU interrupts on large
systems (>200 cpus) will exhaust the cpu 0 interrupt vectors
and initialization of the GRU driver will fail.

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090720142840.GA8885@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2284a4812b6..d2ed6c5ddc8 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3793,6 +3793,9 @@ int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
 	mmr_pnode = uv_blade_to_pnode(mmr_blade);
 	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
 
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
 	return irq;
 }
 
-- 
cgit v1.2.3


From dc731fbbadf5d65c98fcd6c86472aa286c16458a Mon Sep 17 00:00:00 2001
From: Subrata Modak <subrata@linux.vnet.ibm.com>
Date: Tue, 21 Jul 2009 08:02:27 +0530
Subject: x86: Work around compilation warning in arch/x86/kernel/apm_32.c

The following fix was initially inspired by David Howells fix
few days back:

  http://lkml.org/lkml/2009/7/9/109

However, Ingo disapproves such fixes as it's dangerous (it can
hide future, relevant warnings) - in something as
performance-uncritical.

So, initialize 'err' to '0' to work around a GCC false positive
warning:

  http://lkml.org/lkml/2009/7/18/89

Signed-off-by: Subrata Modak<subrata@linux.vnet.ibm.com>
Cc: Sachin P Sant <sachinp@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
LKML-Reference: <20090721023226.31855.67236.sendpatchset@subratamodak.linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apm_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 79302e9a33a..442b5508893 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -811,7 +811,7 @@ static int apm_do_idle(void)
 	u8 ret = 0;
 	int idled = 0;
 	int polling;
-	int err;
+	int err = 0;
 
 	polling = !!(current_thread_info()->status & TS_POLLING);
 	if (polling) {
-- 
cgit v1.2.3


From 19943b0e30b05d42e494ae6fef78156ebc8c637e Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Tue, 4 Aug 2009 16:19:20 +0100
Subject: intel-iommu: Unify hardware and software passthrough support

This makes the hardware passthrough mode work a lot more like the
software version, so that the behaviour of a kernel with 'iommu=pt'
is the same whether the hardware supports passthrough or not.

In particular:
 - We use a single si_domain for the pass-through devices.
 - 32-bit devices can be taken out of the pass-through domain so that
   they don't have to use swiotlb.
 - Devices will work again after being removed from a KVM guest.
 - A potential oops on OOM (in init_context_pass_through()) is fixed.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/x86/kernel/pci-swiotlb.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 6af96ee4420..1e66b18f45c 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -71,9 +71,8 @@ void __init pci_swiotlb_init(void)
 {
 	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
 #ifdef CONFIG_X86_64
-	if ((!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN) ||
-		iommu_pass_through)
-	       swiotlb = 1;
+	if ((!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN))
+		swiotlb = 1;
 #endif
 	if (swiotlb_force)
 		swiotlb = 1;
-- 
cgit v1.2.3


From 7d5b005652bc5ae3e1e0efc53fd0e25a643ec506 Mon Sep 17 00:00:00 2001
From: Alok Kataria <akataria@vmware.com>
Date: Tue, 4 Aug 2009 15:34:22 -0700
Subject: x86: Fix VMI && stack protector

With CONFIG_STACK_PROTECTOR turned on, VMI doesn't boot with
more than one processor. The problem is with the gs value not
being initialized correctly when registering the secondary
processor for VMI's case.

The patch below initializes the gs value for the AP to
__KERNEL_STACK_CANARY. Without this the secondary processor
keeps on taking a GP on every gs access.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: <stable@kernel.org> # for v2.6.30.x
LKML-Reference: <1249425262.18955.40.camel@ank32.eng.vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vmi_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b263423fbe2..95a7289e4b0 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -441,7 +441,7 @@ vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 	ap.ds = __USER_DS;
 	ap.es = __USER_DS;
 	ap.fs = __KERNEL_PERCPU;
-	ap.gs = 0;
+	ap.gs = __KERNEL_STACK_CANARY;
 
 	ap.eflags = 0;
 
-- 
cgit v1.2.3


From 2977fb3ffc8493a2f4f0a362e8660a6cde9f1bb9 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Sat, 1 Aug 2009 11:47:59 +0400
Subject: x86, ioapic: Introduce for_each_irq_pin() helper

This allow us to save a few lines of code.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
LKML-Reference: <20090801075435.597863129@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 43 +++++++++++++++---------------------------
 1 file changed, 15 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7e92a9212fd..ffd8fdfcbe4 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -66,6 +66,8 @@
 #include <asm/apic.h>
 
 #define __apicdebuginit(type) static type __init
+#define for_each_irq_pin(entry, head) \
+	for (entry = head; entry; entry = entry->next)
 
 /*
  *      Is the SiS APIC rmw bug present ?
@@ -410,7 +412,7 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		unsigned int reg;
 		int pin;
 
@@ -490,22 +492,21 @@ static void ioapic_mask_entry(int apic, int pin)
  */
 static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
 {
-	struct irq_pin_list **entryp, *entry;
+	struct irq_pin_list **last, *entry;
 
-	for (entryp = &cfg->irq_2_pin;
-	     *entryp != NULL;
-	     entryp = &(*entryp)->next) {
-		entry = *entryp;
-		/* not again, please */
+	/* don't allow duplicates */
+	last = &cfg->irq_2_pin;
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		if (entry->apic == apic && entry->pin == pin)
 			return;
+		last = &entry->next;
 	}
 
 	entry = get_one_free_irq_2_pin(node);
 	entry->apic = apic;
 	entry->pin = pin;
 
-	*entryp = entry;
+	*last = entry;
 }
 
 /*
@@ -517,7 +518,7 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 {
 	struct irq_pin_list *entry;
 
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
@@ -537,7 +538,7 @@ static void io_apic_modify_irq(struct irq_cfg *cfg,
 	int pin;
 	struct irq_pin_list *entry;
 
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		unsigned int reg;
 		pin = entry->pin;
 		reg = io_apic_read(entry->apic, 0x10 + pin * 2);
@@ -1669,12 +1670,8 @@ __apicdebuginit(void) print_IO_APIC(void)
 		if (!entry)
 			continue;
 		printk(KERN_DEBUG "IRQ%d ", irq);
-		for (;;) {
+		for_each_irq_pin(entry, cfg->irq_2_pin)
 			printk("-> %d:%d", entry->apic, entry->pin);
-			if (!entry->next)
-				break;
-			entry = entry->next;
-		}
 		printk("\n");
 	}
 
@@ -2227,7 +2224,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
 	struct irq_pin_list *entry;
 	u8 vector = cfg->vector;
 
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		unsigned int reg;
 
 		apic = entry->apic;
@@ -2556,20 +2553,10 @@ static void ack_apic_level(unsigned int irq)
 #ifdef CONFIG_INTR_REMAP
 static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
 {
-	int apic, pin;
 	struct irq_pin_list *entry;
 
-	entry = cfg->irq_2_pin;
-	for (;;) {
-
-		if (!entry)
-			break;
-
-		apic = entry->apic;
-		pin = entry->pin;
-		io_apic_eoi(apic, pin);
-		entry = entry->next;
-	}
+	for_each_irq_pin(entry, cfg->irq_2_pin)
+		io_apic_eoi(entry->apic, entry->pin);
 }
 
 static void
-- 
cgit v1.2.3


From a7428cd2ef77734465e36bceb43290e37e2a97c6 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Sat, 1 Aug 2009 11:48:00 +0400
Subject: x86, ioapic: Throw BUG instead of NULL dereference

Instead of plain NULL deref we better throw error
message with a backtrace. Actually we need more
gracious error handling here. Meanwhile leave it
as is.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
LKML-Reference: <20090801075435.769301745@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index ffd8fdfcbe4..2a145d3a837 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -503,6 +503,10 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin
 	}
 
 	entry = get_one_free_irq_2_pin(node);
+	if (!entry) {
+		printk(KERN_ERR "can not alloc irq_pin_list\n");
+		BUG_ON(1);
+	}
 	entry->apic = apic;
 	entry->pin = pin;
 
-- 
cgit v1.2.3


From 9910887af84e33ba98fd6792029470ae80166208 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Thu, 23 Jul 2009 00:52:59 +0400
Subject: x86, apic: Drop redundant bit assignment

cpu_has_apic has already investigated boot_cpu_data
X86_FEATURE_APIC bit for being clear if condition is
triggered.

So there is no need to clear this bit second time.

Signed-off-by: Cyrill Gorcuno v <gorcunov@openvz.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
LKML-Reference: <20090722205259.GE15805@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0a1c2830ec6..0b021c56e82 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1651,7 +1651,6 @@ int __init APIC_init_uniprocessor(void)
 	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
 		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
 			boot_cpu_physical_apicid);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 		return -1;
 	}
 #endif
-- 
cgit v1.2.3


From c1155e34998bc07937cdf0c9db16b6902633a255 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 4 Aug 2009 16:55:29 +0200
Subject: sh: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/hardirq.h | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
index 715ee237fc7..a5be4afa790 100644
--- a/arch/sh/include/asm/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
@@ -1,16 +1,9 @@
 #ifndef __ASM_SH_HARDIRQ_H
 #define __ASM_SH_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 extern void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif /* __ASM_SH_HARDIRQ_H */
-- 
cgit v1.2.3


From e125e7b6944898831b56739a5448e705578bf7e2 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Thu, 2 Jul 2009 21:45:47 +0200
Subject: KVM: Fix KVM_GET_MSR_INDEX_LIST

So far, KVM copied the emulated_msrs (only MSR_IA32_MISC_ENABLE) to a
wrong address in user space due to broken pointer arithmetic. This
caused subtle corruption up there (missing MSR_IA32_MISC_ENABLE had
probably no practical relevance). Moreover, the size check for the
user-provided kvm_msr_list forgot about emulated MSRs.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fe5474aec41..7bc311464fa 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1079,14 +1079,13 @@ long kvm_arch_dev_ioctl(struct file *filp,
 		if (copy_to_user(user_msr_list, &msr_list, sizeof msr_list))
 			goto out;
 		r = -E2BIG;
-		if (n < num_msrs_to_save)
+		if (n < msr_list.nmsrs)
 			goto out;
 		r = -EFAULT;
 		if (copy_to_user(user_msr_list->indices, &msrs_to_save,
 				 num_msrs_to_save * sizeof(u32)))
 			goto out;
-		if (copy_to_user(user_msr_list->indices
-				 + num_msrs_to_save * sizeof(u32),
+		if (copy_to_user(user_msr_list->indices + num_msrs_to_save,
 				 &emulated_msrs,
 				 ARRAY_SIZE(emulated_msrs) * sizeof(u32)))
 			goto out;
-- 
cgit v1.2.3


From 0ff77873b1318fc2d77a85e70690d3cd6cafbd41 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 2 Jul 2009 20:02:15 -0300
Subject: KVM: PIT: fix kpit_elapsed division by zero

Fix division by zero triggered by latch count command on uninitialized
counter.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 4d6f0d293ee..21f68e00524 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -104,6 +104,9 @@ static s64 __kpit_elapsed(struct kvm *kvm)
 	ktime_t remaining;
 	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
 
+	if (!ps->pit_timer.period)
+		return 0;
+
 	/*
 	 * The Counter does not stop when it reaches zero. In
 	 * Modes 0, 1, 4, and 5 the Counter ``wraps around'' to
-- 
cgit v1.2.3


From d6289b9365c3f622a8cfe62c4fb054bb70b5061a Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Mon, 22 Jun 2009 15:27:56 -0300
Subject: KVM: x86: verify MTRR/PAT validity

Do not allow invalid memory types in MTRR/PAT (generating a #GP
otherwise).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 39 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7bc311464fa..3d452901182 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -704,11 +704,48 @@ static bool msr_mtrr_valid(unsigned msr)
 	return false;
 }
 
+static bool valid_pat_type(unsigned t)
+{
+	return t < 8 && (1 << t) & 0xf3; /* 0, 1, 4, 5, 6, 7 */
+}
+
+static bool valid_mtrr_type(unsigned t)
+{
+	return t < 8 && (1 << t) & 0x73; /* 0, 1, 4, 5, 6 */
+}
+
+static bool mtrr_valid(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	int i;
+
+	if (!msr_mtrr_valid(msr))
+		return false;
+
+	if (msr == MSR_IA32_CR_PAT) {
+		for (i = 0; i < 8; i++)
+			if (!valid_pat_type((data >> (i * 8)) & 0xff))
+				return false;
+		return true;
+	} else if (msr == MSR_MTRRdefType) {
+		if (data & ~0xcff)
+			return false;
+		return valid_mtrr_type(data & 0xff);
+	} else if (msr >= MSR_MTRRfix64K_00000 && msr <= MSR_MTRRfix4K_F8000) {
+		for (i = 0; i < 8 ; i++)
+			if (!valid_mtrr_type((data >> (i * 8)) & 0xff))
+				return false;
+		return true;
+	}
+
+	/* variable MTRRs */
+	return valid_mtrr_type(data & 0xff);
+}
+
 static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
 	u64 *p = (u64 *)&vcpu->arch.mtrr_state.fixed_ranges;
 
-	if (!msr_mtrr_valid(msr))
+	if (!mtrr_valid(vcpu, msr, data))
 		return 1;
 
 	if (msr == MSR_MTRRdefType) {
-- 
cgit v1.2.3


From 4b656b1202498184a0ecef86b3b89ff613b9c6ab Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 21 Jul 2009 12:47:45 -0300
Subject: KVM: SVM: force new asid on vcpu migration

If a migrated vcpu matches the asid_generation value of the target pcpu,
there will be no TLB flush via TLB_CONTROL_FLUSH_ALL_ASID.

The check for vcpu.cpu in pre_svm_run is meaningless since svm_vcpu_load
already updated it on schedule in.

Such vcpu will VMRUN with stale TLB entries.

Based on original patch from Joerg Roedel (http://patchwork.kernel.org/patch/10021/)

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 71510e07e69..b1f658ad2f0 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -711,6 +711,7 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		svm->vmcb->control.tsc_offset += delta;
 		vcpu->cpu = cpu;
 		kvm_migrate_timers(vcpu);
+		svm->asid_generation = 0;
 	}
 
 	for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
@@ -1031,7 +1032,6 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data)
 		svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID;
 	}
 
-	svm->vcpu.cpu = svm_data->cpu;
 	svm->asid_generation = svm_data->asid_generation;
 	svm->vmcb->control.asid = svm_data->next_asid++;
 }
@@ -2300,8 +2300,8 @@ static void pre_svm_run(struct vcpu_svm *svm)
 	struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu);
 
 	svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING;
-	if (svm->vcpu.cpu != cpu ||
-	    svm->asid_generation != svm_data->asid_generation)
+	/* FIXME: handle wraparound of asid_generation */
+	if (svm->asid_generation != svm_data->asid_generation)
 		new_asid(svm, svm_data);
 }
 
-- 
cgit v1.2.3


From 025dbbf36a7680bffe54d9dcbf0a8bc01a7cbd10 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 22 Jul 2009 13:05:49 -0300
Subject: KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in
 kvm_mmu_change_mmu_pages

kvm_mmu_change_mmu_pages mishandles the case where n_alloc_mmu_pages is
smaller then n_free_mmu_pages, by not checking if the result of
the subtraction is negative.

Its a valid condition which can happen if a large number of pages has
been recently freed.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7030b5f911b..49a10d00830 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1407,24 +1407,25 @@ static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
  */
 void kvm_mmu_change_mmu_pages(struct kvm *kvm, unsigned int kvm_nr_mmu_pages)
 {
+	int used_pages;
+
+	used_pages = kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages;
+	used_pages = max(0, used_pages);
+
 	/*
 	 * If we set the number of mmu pages to be smaller be than the
 	 * number of actived pages , we must to free some mmu pages before we
 	 * change the value
 	 */
 
-	if ((kvm->arch.n_alloc_mmu_pages - kvm->arch.n_free_mmu_pages) >
-	    kvm_nr_mmu_pages) {
-		int n_used_mmu_pages = kvm->arch.n_alloc_mmu_pages
-				       - kvm->arch.n_free_mmu_pages;
-
-		while (n_used_mmu_pages > kvm_nr_mmu_pages) {
+	if (used_pages > kvm_nr_mmu_pages) {
+		while (used_pages > kvm_nr_mmu_pages) {
 			struct kvm_mmu_page *page;
 
 			page = container_of(kvm->arch.active_mmu_pages.prev,
 					    struct kvm_mmu_page, link);
 			kvm_mmu_zap_page(kvm, page);
-			n_used_mmu_pages--;
+			used_pages--;
 		}
 		kvm->arch.n_free_mmu_pages = 0;
 	}
-- 
cgit v1.2.3


From 34f0c1ad27a74bd5eb0f99ea43ab6a4658d6419d Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Wed, 22 Jul 2009 23:53:26 +0200
Subject: KVM: VMX: Fix locking order in handle_invalid_guest_state

Release and re-acquire preemption and IRQ lock in the same order as
vcpu_enter_guest does.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 356a0ce85c6..6bf58c083f0 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3157,8 +3157,8 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	enum emulation_result err = EMULATE_DONE;
 
-	preempt_enable();
 	local_irq_enable();
+	preempt_enable();
 
 	while (!guest_state_valid(vcpu)) {
 		err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
@@ -3177,8 +3177,8 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 			schedule();
 	}
 
-	local_irq_disable();
 	preempt_disable();
+	local_irq_disable();
 
 	vmx->invalid_state_emulation_result = err;
 }
-- 
cgit v1.2.3


From 263799a3616242201e20fd2025fe84047b1379b1 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Tue, 21 Jul 2009 10:43:07 +0200
Subject: KVM: VMX: Fix locking imbalance on emulation failure

We have to disable preemption and IRQs on every exit from
handle_invalid_guest_state, otherwise we generate at least a
preempt_disable imbalance.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6bf58c083f0..29f912927a5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3168,7 +3168,7 @@ static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
 
 		if (err != EMULATE_DONE) {
 			kvm_report_emulation_failure(vcpu, "emulation failure");
-			return;
+			break;
 		}
 
 		if (signal_pending(current))
-- 
cgit v1.2.3


From d3bc2f91b4761a8d9f96bea167fef2f8c00dea54 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Thu, 16 Jul 2009 17:17:37 +0200
Subject: KVM: s390: fix wait_queue handling

There are two waitqueues in kvm for wait handling:
vcpu->wq for virt/kvm/kvm_main.c and
vpcu->arch.local_int.wq for the s390 specific wait code.

the wait handling in kvm_s390_handle_wait was broken by using different
wait_queues for add_wait queue and remove_wait_queue.

There are two options to fix the problem:
o  move all the s390 specific code to vcpu->wq and remove
   vcpu->arch.local_int.wq
o  move all the s390 specific code to vcpu->arch.local_int.wq

This patch chooses the 2nd variant for two reasons:
o  s390 does not use kvm_vcpu_block but implements its own enabled wait
   handling.
   Having a separate wait_queue make it clear, that our wait mechanism is
   different
o  the patch is much smaller

Report-by:  Julia Lawall <julia@diku.dk>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/kvm/interrupt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index f04f5301b1b..4d613415c43 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -386,7 +386,7 @@ no_timer:
 	}
 	__unset_cpu_idle(vcpu);
 	__set_current_state(TASK_RUNNING);
-	remove_wait_queue(&vcpu->wq, &wait);
+	remove_wait_queue(&vcpu->arch.local_int.wq, &wait);
 	spin_unlock_bh(&vcpu->arch.local_int.lock);
 	spin_unlock(&vcpu->arch.local_int.float_int->lock);
 	hrtimer_try_to_cancel(&vcpu->arch.ckc_timer);
-- 
cgit v1.2.3


From c428dcc9b9f967945992a2f8529e8c50a31d7913 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 17 Jun 2009 15:04:19 +1000
Subject: KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on
 powerpc

Eliminates this compiler warning:

arch/powerpc/kvm/../../../virt/kvm/kvm_main.c:1178: error: integer overflow in expression

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_host.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index dfdf13c9fef..fddc3ed715f 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -34,7 +34,7 @@
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 
 /* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1<<31)
+#define KVM_PAGES_PER_HPAGE (1UL << 31)
 
 struct kvm;
 struct kvm_run;
-- 
cgit v1.2.3


From e9cbde8c158629cc96a26b2323c4a243536c1951 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 6 Jul 2009 12:49:39 +0300
Subject: KVM: ia64: fix build failures due to ia64/unsigned long mismatches

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/mmio.c |  6 ++++--
 arch/ia64/kvm/vcpu.c |  6 +++---
 arch/ia64/kvm/vcpu.h | 13 +++++++------
 3 files changed, 14 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index 21f63fffc37..9bf55afd08d 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -247,7 +247,8 @@ void emulate_io_inst(struct kvm_vcpu *vcpu, u64 padr, u64 ma)
 		vcpu_get_fpreg(vcpu, inst.M9.f2, &v);
 		/* Write high word. FIXME: this is a kludge!  */
 		v.u.bits[1] &= 0x3ffff;
-		mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+		mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1], 8,
+			    ma, IOREQ_WRITE);
 		data = v.u.bits[0];
 		size = 3;
 	} else if (inst.M10.major == 7 && inst.M10.x6 == 0x3B) {
@@ -265,7 +266,8 @@ void emulate_io_inst(struct kvm_vcpu *vcpu, u64 padr, u64 ma)
 
 		/* Write high word.FIXME: this is a kludge!  */
 		v.u.bits[1] &= 0x3ffff;
-		mmio_access(vcpu, padr + 8, &v.u.bits[1], 8, ma, IOREQ_WRITE);
+		mmio_access(vcpu, padr + 8, (u64 *)&v.u.bits[1],
+			    8, ma, IOREQ_WRITE);
 		data = v.u.bits[0];
 		size = 3;
 	} else if (inst.M10.major == 7 && inst.M10.x6 == 0x31) {
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index 46b02cbcc87..cc406d064a0 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -461,7 +461,7 @@ void setreg(unsigned long regnum, unsigned long val,
 u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg)
 {
 	struct kvm_pt_regs *regs = vcpu_regs(vcpu);
-	u64 val;
+	unsigned long val;
 
 	if (!reg)
 		return 0;
@@ -469,7 +469,7 @@ u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg)
 	return val;
 }
 
-void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 value, int nat)
+void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg, u64 value, int nat)
 {
 	struct kvm_pt_regs *regs = vcpu_regs(vcpu);
 	long sof = (regs->cr_ifs) & 0x7f;
@@ -1072,7 +1072,7 @@ void kvm_ttag(struct kvm_vcpu *vcpu, INST64 inst)
 	vcpu_set_gr(vcpu, inst.M46.r1, tag, 0);
 }
 
-int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, u64 *padr)
+int vcpu_tpa(struct kvm_vcpu *vcpu, u64 vadr, unsigned long *padr)
 {
 	struct thash_data *data;
 	union ia64_isr visr, pt_isr;
diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h
index 042af92ced8..360724d3ae6 100644
--- a/arch/ia64/kvm/vcpu.h
+++ b/arch/ia64/kvm/vcpu.h
@@ -686,14 +686,15 @@ static inline int highest_inservice_irq(struct kvm_vcpu *vcpu)
 	return highest_bits((int *)&(VMX(vcpu, insvc[0])));
 }
 
-extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_get_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
 					struct ia64_fpreg *val);
-extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, u64 reg,
+extern void vcpu_set_fpreg(struct kvm_vcpu *vcpu, unsigned long reg,
 					struct ia64_fpreg *val);
-extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, u64 reg);
-extern void vcpu_set_gr(struct kvm_vcpu *vcpu, u64 reg, u64 val, int nat);
-extern u64 vcpu_get_psr(struct kvm_vcpu *vcpu);
-extern void vcpu_set_psr(struct kvm_vcpu *vcpu, u64 val);
+extern u64 vcpu_get_gr(struct kvm_vcpu *vcpu, unsigned long reg);
+extern void vcpu_set_gr(struct kvm_vcpu *vcpu, unsigned long reg,
+			u64 val, int nat);
+extern unsigned long vcpu_get_psr(struct kvm_vcpu *vcpu);
+extern void vcpu_set_psr(struct kvm_vcpu *vcpu, unsigned long val);
 extern u64 vcpu_thash(struct kvm_vcpu *vcpu, u64 vadr);
 extern void vcpu_bsw0(struct kvm_vcpu *vcpu);
 extern void thash_vhpt_insert(struct kvm_vcpu *v, u64 pte,
-- 
cgit v1.2.3


From ce69a784504222c3ab6f1b3c357d09ec5772127a Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Mon, 20 Jul 2009 15:24:17 +0300
Subject: x86/apic: Enable x2APIC without interrupt remapping under KVM

KVM would like to provide x2APIC interface to a guest without emulating
interrupt remapping device. The reason KVM prefers guest to use x2APIC
is that x2APIC interface is better virtualizable and provides better
performance than mmio xAPIC interface:

 - msr exits are faster than mmio (no page table walk, emulation)
 - no need to read back ICR to look at the busy bit
 - one 64 bit ICR write instead of two 32 bit writes
 - shared code with the Hyper-V paravirt interface

Included patch changes x2APIC enabling logic to enable it even if IR
initialization failed, but kernel runs under KVM and no apic id is
greater than 255 (if there is one spec requires BIOS to move to x2apic
mode before starting an OS).

-v2: fix build
-v3: fix bug causing compiler warning

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Sheng Yang <sheng@linux.intel.com>
Cc: "avi@redhat.com" <avi@redhat.com>
LKML-Reference: <20090720122417.GR5638@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h     |  7 ++++
 arch/x86/kernel/apic/apic.c     | 83 +++++++++++++++++++++++------------------
 arch/x86/kernel/apic/probe_64.c |  6 +--
 3 files changed, 56 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index bb7d4792584..586b7adb8e5 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -183,6 +183,10 @@ static inline int x2apic_enabled(void)
 }
 
 #define x2apic_supported()	(cpu_has_x2apic)
+static inline void x2apic_force_phys(void)
+{
+	x2apic_phys = 1;
+}
 #else
 static inline void check_x2apic(void)
 {
@@ -194,6 +198,9 @@ static inline int x2apic_enabled(void)
 {
 	return 0;
 }
+static inline void x2apic_force_phys(void)
+{
+}
 
 #define	x2apic_preenabled 0
 #define	x2apic_supported()	0
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0b021c56e82..de039fcdd05 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -49,6 +49,7 @@
 #include <asm/mtrr.h>
 #include <asm/smp.h>
 #include <asm/mce.h>
+#include <asm/kvm_para.h>
 
 unsigned int num_processors;
 
@@ -1361,52 +1362,76 @@ void enable_x2apic(void)
 }
 #endif /* CONFIG_X86_X2APIC */
 
-void __init enable_IR_x2apic(void)
+int __init enable_IR(void)
 {
 #ifdef CONFIG_INTR_REMAP
 	int ret;
-	unsigned long flags;
-	struct IO_APIC_route_entry **ioapic_entries = NULL;
 
 	ret = dmar_table_init();
 	if (ret) {
 		pr_debug("dmar_table_init() failed with %d:\n", ret);
-		goto ir_failed;
+		return 0;
 	}
 
 	if (!intr_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
-		goto ir_failed;
+		return 0;
 	}
 
-
 	if (!x2apic_preenabled && skip_ioapic_setup) {
 		pr_info("Skipped enabling intr-remap because of skipping "
 			"io-apic setup\n");
-		return;
+		return 0;
 	}
 
+	if (enable_intr_remapping(x2apic_supported()))
+		return 0;
+
+	pr_info("Enabled Interrupt-remapping\n");
+
+	return 1;
+
+#endif
+	return 0;
+}
+
+void __init enable_IR_x2apic(void)
+{
+	unsigned long flags;
+	struct IO_APIC_route_entry **ioapic_entries = NULL;
+	int ret, x2apic_enabled = 0;
+
 	ioapic_entries = alloc_ioapic_entries();
 	if (!ioapic_entries) {
-		pr_info("Allocate ioapic_entries failed: %d\n", ret);
-		goto end;
+		pr_err("Allocate ioapic_entries failed\n");
+		goto out;
 	}
 
 	ret = save_IO_APIC_setup(ioapic_entries);
 	if (ret) {
 		pr_info("Saving IO-APIC state failed: %d\n", ret);
-		goto end;
+		goto out;
 	}
 
 	local_irq_save(flags);
-	mask_IO_APIC_setup(ioapic_entries);
 	mask_8259A();
+	mask_IO_APIC_setup(ioapic_entries);
 
-	ret = enable_intr_remapping(x2apic_supported());
-	if (ret)
-		goto end_restore;
+	ret = enable_IR();
+	if (!ret) {
+		/* IR is required if there is APIC ID > 255 even when running
+		 * under KVM
+		 */
+		if (max_physical_apicid > 255 || !kvm_para_available())
+			goto nox2apic;
+		/*
+		 * without IR all CPUs can be addressed by IOAPIC/MSI
+		 * only in physical mode
+		 */
+		x2apic_force_phys();
+	}
 
-	pr_info("Enabled Interrupt-remapping\n");
+	x2apic_enabled = 1;
 
 	if (x2apic_supported() && !x2apic_mode) {
 		x2apic_mode = 1;
@@ -1414,41 +1439,25 @@ void __init enable_IR_x2apic(void)
 		pr_info("Enabled x2apic\n");
 	}
 
-end_restore:
-	if (ret)
-		/*
-		 * IR enabling failed
-		 */
+nox2apic:
+	if (!ret) /* IR enabling failed */
 		restore_IO_APIC_setup(ioapic_entries);
-
 	unmask_8259A();
 	local_irq_restore(flags);
 
-end:
+out:
 	if (ioapic_entries)
 		free_ioapic_entries(ioapic_entries);
 
-	if (!ret)
+	if (x2apic_enabled)
 		return;
 
-ir_failed:
 	if (x2apic_preenabled)
-		panic("x2apic enabled by bios. But IR enabling failed");
+		panic("x2apic: enabled by BIOS but kernel init failed.");
 	else if (cpu_has_x2apic)
-		pr_info("Not enabling x2apic,Intr-remapping\n");
-#else
-	if (!cpu_has_x2apic)
-		return;
-
-	if (x2apic_preenabled)
-		panic("x2apic enabled prior OS handover,"
-		      " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
-#endif
-
-	return;
+		pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
 }
 
-
 #ifdef CONFIG_X86_64
 /*
  * Detect and enable local APICs on non-SMP boards.
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880f9b8..f3b1037076e 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -50,11 +50,11 @@ static struct apic *apic_probe[] __initdata = {
 void __init default_setup_apic_routing(void)
 {
 #ifdef CONFIG_X86_X2APIC
-	if (x2apic_mode && (apic != &apic_x2apic_phys &&
+	if (x2apic_mode
 #ifdef CONFIG_X86_UV
-		       apic != &apic_x2apic_uv_x &&
+		       && apic != &apic_x2apic_uv_x
 #endif
-		       apic != &apic_x2apic_cluster)) {
+		       ) {
 		if (x2apic_phys)
 			apic = &apic_x2apic_phys;
 		else
-- 
cgit v1.2.3


From b37c45b8c27c049dc44673e40fd63820fd9a9d91 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Wed, 5 Aug 2009 16:53:24 +0300
Subject: OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs

gpio_get() should return DATAIN register value when the GPIO
is configured as input whereas it should return DATAOUT register
value when the GPIO is configured as output.
Now /sys/kernel/debug/gpio shows proper values for output GPIOs

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 121 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 89 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..9c16ca8d293 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	__raw_writel(l, reg);
 }
 
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-	struct gpio_bank *bank;
 	void __iomem *reg;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
-	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio)
 			& (1 << get_gpio_index(gpio))) != 0;
 }
 
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAOUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAOUT;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
 #define MOD_REG_BIT(reg, bit_mask, set)	\
 do {	\
 	int l = __raw_readl(base + reg); \
@@ -1350,9 +1395,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL;
+		break;
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+	}
+	return __raw_readl(reg) & mask;
+}
+
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return __omap_get_gpio_datain(chip->base + offset);
+	struct gpio_bank *bank;
+	void __iomem *reg;
+	int gpio;
+	u32 mask;
+
+	gpio = chip->base + offset;
+	bank = get_gpio_bank(gpio);
+	reg = bank->base;
+	mask = 1 << get_gpio_index(gpio);
+
+	if (gpio_is_input(bank, mask))
+		return _get_gpio_datain(bank, gpio);
+	else
+		return _get_gpio_dataout(bank, gpio);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1886,34 +1971,6 @@ arch_initcall(omap_gpio_sysinit);
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
-	void __iomem *reg = bank->base;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
-		break;
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-	}
-	return __raw_readl(reg) & mask;
-}
-
-
 static int dbg_gpio_show(struct seq_file *s, void *unused)
 {
 	unsigned	i, j, gpio;
-- 
cgit v1.2.3


From 7cc515f74d2871daff106a17714bfd16bcb045ca Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 10 Jun 2009 09:02:25 -0700
Subject: OMAP2/3: PM: make PM __init calls static

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm.h     | 3 ---
 arch/arm/mach-omap2/pm24xx.c | 2 +-
 arch/arm/mach-omap2/pm34xx.c | 2 +-
 3 files changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index f7b3baf7667..21201cd4117 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,9 +11,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index db1025562fb..528dbdc26e2 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void)
 			  WKUP_MOD, PM_WKEN);
 }
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
 	u32 l;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 841d4c5ed8b..765cdc0cd7a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -652,7 +652,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm)
 	return 0;
 }
 
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
 	int ret;
-- 
cgit v1.2.3


From 364dd47466ff7a7749bf037df4bf3b7aedbfe6f4 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 9 Jun 2009 11:45:30 -0700
Subject: OMAP3: PM: CM_REGADDR macros using wrong name

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/cm.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 1d3c93bf86d..f3c91a1ca39 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -29,9 +29,9 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-- 
cgit v1.2.3


From 3a6667acf916b3e32be4682196882fc2ed0ec23e Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Mon, 27 Apr 2009 07:50:23 -0700
Subject: OMAP3: PM: Ensure PRCM interrupts are cleared at boot

Any pending PRCM interrupts can prevent retention.  Ensure
they are cleared during boot.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 765cdc0cd7a..cc83dfc39a8 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -613,6 +613,9 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
 	omap3_iva_idle();
 	omap3_d2d_idle();
 }
-- 
cgit v1.2.3


From 3a07ae30a0bfa93ff2b242acf670c6d8e2de35de Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Mon, 27 Apr 2009 16:14:54 -0700
Subject: OMAP3: PM: Clear pending PRCM reset flags on init

Any pending reset flags can prevent retention.  Ensure they are all
cleared during boot.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index cc83dfc39a8..1422e931f57 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -613,6 +613,15 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-- 
cgit v1.2.3


From 040fed059c34da5115790609f1a038fc9aec88d1 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 5 May 2009 16:34:25 -0700
Subject: OMAP3: PM: prevent module wakeups from waking IVA2

By default, prevent functional wakeups from inside a module from
waking up the IVA2.  Let DSP Bridge code handle this when loaded.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 1422e931f57..c813a081c3c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -613,6 +613,12 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
 	/* Clear any pending 'reset' flags */
 	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
 	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
-- 
cgit v1.2.3


From 10f90ed2d727c0f344d910c02c9726d0481d9b00 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 24 Jun 2009 11:39:18 -0700
Subject: OMAP3: PM: Do not build suspend code if SUSPEND is not enabled

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c813a081c3c..528f725722a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -39,7 +39,9 @@
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
+#ifdef CONFIG_SUSPEND
 	u32 saved_state;
+#endif
 	struct list_head node;
 };
 
@@ -293,6 +295,7 @@ out:
 	local_irq_enable();
 }
 
+#ifdef CONFIG_SUSPEND
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -366,6 +369,7 @@ static struct platform_suspend_ops omap_pm_ops = {
 	.finish		= omap3_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
+#endif /* CONFIG_SUSPEND */
 
 
 /**
@@ -710,7 +714,9 @@ static int __init omap3_pm_init(void)
 	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
 					 omap34xx_cpu_suspend_sz);
 
+#ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
 
-- 
cgit v1.2.3


From 4789998a30d845d94a7595076d1392ffd5a9d39e Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 24 Jun 2009 10:32:03 -0700
Subject: OMAP4: UART: cleanup special case IRQ handling

Streamline the OMAP4 special IRQ assignments by putting inside
normal init loop instead of having a separate loop.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/serial.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15bfe4..c82ec95cd79 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -496,10 +496,6 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
-	if (cpu_is_omap44xx()) {
-		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
-			serial_platform_data[i].irq += 32;
-	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct plat_serial8250_port *p = serial_platform_data + i;
@@ -533,6 +529,9 @@ void __init omap_serial_init(void)
 		uart->p = p;
 		list_add(&uart->node, &uart_list);
 
+		if (cpu_is_omap44xx())
+			p->irq += 32;
+
 		omap_uart_enable_clocks(uart);
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
-- 
cgit v1.2.3


From 2466211e5debd205fc550d871fe0ab9b9a6d02ed Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Thu, 5 Mar 2009 16:32:23 +0200
Subject: OMAP3: Fixed crash bug with serial + suspend

It was possible for an unhandled interrupt to occur if there was incoming
serial traffic during wakeup from suspend. This was caused by the code
in arch-arm/mach-omap2/serial.c keeping interrupt enabled all the time,
but not acking its interrupts. Applies on top of PM branch.

Use the PM begin/end hooks to ensure that the "serial idle" interrupts
are disabled during the suspend path.  Also, since begin/end hooks are
now used, use the suspend_state that is passed in the begin hook instead
of the enter hook as per the platform_suspend_ops docs.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c             | 23 +++++++++++++++++++++--
 arch/arm/mach-omap2/serial.c             | 14 ++++++++++++++
 arch/arm/plat-omap/include/mach/serial.h |  1 +
 3 files changed, 36 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 528f725722a..b07efb26de1 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -296,6 +296,8 @@ out:
 }
 
 #ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -342,11 +344,11 @@ restore:
 	return ret;
 }
 
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
 {
 	int ret = 0;
 
-	switch (state) {
+	switch (suspend_state) {
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
 		ret = omap3_pm_suspend();
@@ -363,7 +365,24 @@ static void omap3_pm_finish(void)
 	enable_hlt();
 }
 
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	omap_uart_enable_irqs(0);
+	return 0;
+}
+
+static void omap3_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+	omap_uart_enable_irqs(1);
+	return;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap3_pm_begin,
+	.end		= omap3_pm_end,
 	.prepare	= omap3_pm_prepare,
 	.enter		= omap3_pm_enter,
 	.finish		= omap3_pm_finish,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c82ec95cd79..5352d05b42d 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -435,6 +435,20 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	WARN_ON(ret);
 }
 
+void omap_uart_enable_irqs(int enable)
+{
+	int ret;
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (enable)
+			ret = request_irq(uart->p->irq, omap_uart_interrupt,
+				IRQF_SHARED, "serial idle", (void *)uart);
+		else
+			free_irq(uart->p->irq, (void *)uart);
+	}
+}
+
 static ssize_t sleep_timeout_show(struct kobject *kobj,
 				  struct kobj_attribute *attr,
 				  char *buf)
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 13abd02d152..def0529c75e 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
 extern void omap_uart_prepare_idle(int num);
 extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
 #endif
 
 #endif
-- 
cgit v1.2.3


From fd455ea899b5a14a8cdd276e15f3b47696526f92 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Mon, 27 Apr 2009 12:27:36 -0700
Subject: OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial ports

This patch causes the OMAP uarts to honor the sysfs power/wakeup file
for IOPAD wakeups. Before the OMAP was always woken up from off mode
on a rs232 signal change.  This patch also creates a different
platform device for each serial port so that the wakeup properties can
be control per port.

By default, IOPAD wakeups are enabled for each UART.  To disable,

  # echo disabled > /sys/devices/platform/serial8250.0/power/wakeup

Where serial8250.0 can be replaced by .1, or .2 to control the other
ports.

Original idea and original patch from Russ Dill <russ.dill@gmail.com>

Cc: Russ Dill <russ.dill@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/serial.c | 174 ++++++++++++++++++++++++++++---------------
 1 file changed, 116 insertions(+), 58 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 5352d05b42d..6f35a7e4893 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -54,6 +54,7 @@ struct omap_uart_state {
 
 	struct plat_serial8250_port *p;
 	struct list_head node;
+	struct platform_device pdev;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	int context_valid;
@@ -68,10 +69,9 @@ struct omap_uart_state {
 #endif
 };
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
 static LIST_HEAD(uart_list);
 
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
 	{
 		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
@@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
@@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
@@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 	clk_disable(uart->fck);
 }
 
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+	/* Clear wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v &= ~uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are cleared */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
 					  int enable)
 {
@@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
+	if (device_may_wakeup(&uart->pdev.dev))
+		omap_uart_enable_wakeup(uart);
+	else
+		omap_uart_disable_wakeup(uart);
+
 	if (!uart->clocked)
 		return;
 
@@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num)
 			/* Check for normal UART wakeup */
 			if (__raw_readl(uart->wk_st) & uart->wk_mask)
 				omap_uart_block_sleep(uart);
-
 			return;
 		}
 	}
@@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-	u32 v;
 	struct plat_serial8250_port *p = uart->p;
 	int ret;
 
 	uart->can_sleep = 0;
-	uart->timeout = sleep_timeout;
+	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
 	mod_timer(&uart->timer, jiffies + uart->timeout);
@@ -413,22 +460,6 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	/* Set wake-enable bit */
-	if (uart->wk_en && uart->wk_mask) {
-		v = __raw_readl(uart->wk_en);
-		v |= uart->wk_mask;
-		__raw_writel(v, uart->wk_en);
-	}
-
-	/* Ensure IOPAD wake-enables are set */
-	if (cpu_is_omap34xx() && uart->padconf) {
-		u16 v;
-
-		v = omap_ctrl_readw(uart->padconf);
-		v |= OMAP3_PADCONF_WAKEUPENABLE0;
-		omap_ctrl_writew(v, uart->padconf);
-	}
-
 	p->flags |= UPF_SHARE_IRQ;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
@@ -449,54 +480,81 @@ void omap_uart_enable_irqs(int enable)
 	}
 }
 
-static ssize_t sleep_timeout_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
+static ssize_t sleep_timeout_show(struct device *dev,
+				  struct device_attribute *attr,
 				  char *buf)
 {
-	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
+
+	return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
 
-static ssize_t sleep_timeout_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+				   struct device_attribute *attr,
 				   const char *buf, size_t n)
 {
-	struct omap_uart_state *uart;
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
 		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
 		return -EINVAL;
 	}
-	sleep_timeout = value * HZ;
-	list_for_each_entry(uart, &uart_list, node) {
-		uart->timeout = sleep_timeout;
-		if (uart->timeout)
-			mod_timer(&uart->timer, jiffies + uart->timeout);
-		else
-			/* A zero value means disable timeout feature */
-			omap_uart_block_sleep(uart);
-	}
+
+	uart->timeout = value * HZ;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		/* A zero value means disable timeout feature */
+		omap_uart_block_sleep(uart);
+
 	return n;
 }
 
-static struct kobj_attribute sleep_timeout_attr =
-	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM,
+			.dev			= {
+				.platform_data	= serial_platform_data0,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM1,
+			.dev			= {
+				.platform_data	= serial_platform_data1,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM2,
+			.dev			= {
+				.platform_data	= serial_platform_data2,
+			},
+		},
 	},
 };
 
 void __init omap_serial_init(void)
 {
-	int i, err;
+	int i;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -512,8 +570,10 @@ void __init omap_serial_init(void)
 		return;
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
 		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+		struct plat_serial8250_port *p = dev->platform_data;
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -549,15 +609,13 @@ void __init omap_serial_init(void)
 		omap_uart_enable_clocks(uart);
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
-	}
-
-	err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
-	if (!err)
-		err = sysfs_create_file(&serial_device.dev.kobj,
-					&sleep_timeout_attr.attr);
-#endif
 
+		if (WARN_ON(platform_device_register(pdev)))
+			continue;
+		if ((cpu_is_omap34xx() && uart->padconf) ||
+		    (uart->wk_en && uart->wk_mask)) {
+			device_init_wakeup(dev, true);
+			DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+		}
+	}
 }
-
-- 
cgit v1.2.3


From bcf396c48012a5e4c7ab77be5c40df10d6bdb8ad Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 30 Jun 2009 21:02:45 -0700
Subject: OMAP2/3/4: UART: allow in-order port traversal

Use list_add_tail() when adding discovered UART ports.  This is so
traversal using list_for_each_entry() will traverse the list in the
order they were found.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 6f35a7e4893..a7421a50410 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -601,7 +601,7 @@ void __init omap_serial_init(void)
 		uart->num = i;
 		p->private_data = uart;
 		uart->p = p;
-		list_add(&uart->node, &uart_list);
+		list_add_tail(&uart->node, &uart_list);
 
 		if (cpu_is_omap44xx())
 			p->irq += 32;
-- 
cgit v1.2.3


From 60c45ae1107c4ec47d2c84e5984ea59d02b2863d Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Tue, 23 Jun 2009 12:53:29 +0300
Subject: OMAP: PM: CPUfreq: obey min/max settings of policy

Use the min/max settings from CPUfreq policy rather than
processor defined min/max settings.

Without this patch, it's possible to scale frequency outside
the current policy range.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/plat-omap/cpu-omap.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 843e8af6406..1868c0d8f9b 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy,
 
 	/* Ensure desired rate is within allowed range.  Some govenors
 	 * (ondemand) will just pass target_freq=0 to get the minimum. */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
+	if (target_freq < policy->min)
+		target_freq = policy->min;
+	if (target_freq > policy->max)
+		target_freq = policy->max;
 
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
-- 
cgit v1.2.3


From 6c5f80393b107b0c9e2a54b03b65d1880e706655 Mon Sep 17 00:00:00 2001
From: Jouni Hogander <jouni.hogander@nokia.com>
Date: Wed, 29 Oct 2008 12:06:04 +0200
Subject: OMAP3: PM: Fix wrong sequence in suspend.

Powerdomain previous state is checked after restoring new states in
suspend. This patch fixes this problem.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index b07efb26de1..488d595d8e4 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -326,7 +326,6 @@ static int omap3_pm_suspend(void)
 restore:
 	/* Restore next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
 			printk(KERN_INFO "Powerdomain (%s) didn't enter "
@@ -334,6 +333,7 @@ restore:
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
-- 
cgit v1.2.3


From 55b6019ae29456e0f1e4087546bf4221c48622a0 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu, 4 Jun 2009 15:57:10 -0700
Subject: OMAP: GPIO: clear/restore level/edge detect settings on mask/unmask

If IRQ triggering is enabled, it can trigger a pending interrupt
even for masked interrupts.  Any pending GPIO interrupts can
prevent the powerdomain from hitting retention.

Problem found, reported and additional review and testing by Chunquiu
Wang.

Tested-by: Chunquiu Wang <cqwang@motorola.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/plat-omap/gpio.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..77bad14633e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1189,6 +1189,7 @@ static void gpio_mask_irq(unsigned int irq)
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 
 	_set_gpio_irqenable(bank, gpio, 0);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 static void gpio_unmask_irq(unsigned int irq)
@@ -1196,6 +1197,11 @@ static void gpio_unmask_irq(unsigned int irq)
 	unsigned int gpio = irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	struct irq_desc *desc = irq_to_desc(irq);
+	u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+	if (trigger)
+		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
 
 	/* For level-triggered GPIOs, the clearing must be done after
 	 * the HW source is cleared, thus after the handler has run */
-- 
cgit v1.2.3


From 6fd210a9cc398ecbff7bcdbe220651b73b654f56 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Mon, 20 Jul 2009 09:09:23 -0700
Subject: OMAP3: Overo: add missing pen-down GPIO definition

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/board-overo.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528fbfb..e26af837510 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -51,6 +51,7 @@
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_PENDOWN	114
 #define OVERO_GPIO_BT_NRESET	164
 #define OVERO_GPIO_USBH_CPEN	168
 #define OVERO_GPIO_USBH_NRESET	183
-- 
cgit v1.2.3


From 1e2c8d830a74c24ccb25601bd89dcd0dbcb4e9f5 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 4 Aug 2009 10:52:47 +0000
Subject: ar7: add fixed PHY support for the two on-board cpmac

This patch adds fixed PHY support for the two on-chip
cpmac Ethernet adapters.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/mips/ar7/platform.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 54224496178..c4737ce6d29 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -33,6 +33,8 @@
 #include <linux/leds.h>
 #include <linux/string.h>
 #include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -209,6 +211,12 @@ static struct physmap_flash_data physmap_flash_data = {
 	.width = 2,
 };
 
+static struct fixed_phy_status fixed_phy_status __initdata = {
+	.link = 1,
+	.speed = 100,
+	.duplex = 1,
+};
+
 static struct plat_cpmac_data cpmac_low_data = {
 	.reset_bit = 17,
 	.power_bit = 20,
@@ -530,6 +538,9 @@ static int __init ar7_register_devices(void)
 	}
 
 	if (ar7_has_high_cpmac()) {
+		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
+		if (res && res != -ENODEV)
+			return res;
 		cpmac_get_mac(1, cpmac_high_data.dev_addr);
 		res = platform_device_register(&cpmac_high);
 		if (res)
@@ -538,6 +549,10 @@ static int __init ar7_register_devices(void)
 		cpmac_low_data.phy_mask = 0xffffffff;
 	}
 
+	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
+	if (res && res != -ENODEV)
+		return res;
+
 	cpmac_get_mac(0, cpmac_low_data.dev_addr);
 	res = platform_device_register(&cpmac_low);
 	if (res)
-- 
cgit v1.2.3


From 49c794e94649020248e37b78db16cd25bad38b4f Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Tue, 4 Aug 2009 07:28:28 +0000
Subject: net: implement a SO_PROTOCOL getsockoption

Similar to SO_TYPE returning the socket type, SO_PROTOCOL allows to
retrieve the protocol used with a given socket.

I am not quite sure why we have that-many copies of socket.h, and why
the values are not the same on all arches either, but for where hex
numbers dominate, I use 0x1029 for SO_PROTOCOL as that seems to be
the next free unused number across a bunch of operating systems, or
so Google results make me want to believe. SO_PROTOCOL for others
just uses the next free Linux number, 38.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/alpha/include/asm/socket.h      | 1 +
 arch/arm/include/asm/socket.h        | 2 ++
 arch/avr32/include/asm/socket.h      | 2 ++
 arch/cris/include/asm/socket.h       | 2 ++
 arch/frv/include/asm/socket.h        | 2 ++
 arch/h8300/include/asm/socket.h      | 2 ++
 arch/ia64/include/asm/socket.h       | 2 ++
 arch/m32r/include/asm/socket.h       | 2 ++
 arch/m68k/include/asm/socket.h       | 2 ++
 arch/microblaze/include/asm/socket.h | 2 ++
 arch/mips/include/asm/socket.h       | 1 +
 arch/mn10300/include/asm/socket.h    | 2 ++
 arch/parisc/include/asm/socket.h     | 1 +
 arch/powerpc/include/asm/socket.h    | 2 ++
 arch/s390/include/asm/socket.h       | 2 ++
 arch/sparc/include/asm/socket.h      | 2 ++
 arch/x86/include/asm/socket.h        | 2 ++
 arch/xtensa/include/asm/socket.h     | 2 ++
 18 files changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 3641ec1452f..2f8b4d37774 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -32,6 +32,7 @@
 #define	SO_RCVTIMEO	0x1012
 #define	SO_SNDTIMEO	0x1013
 #define SO_ACCEPTCONN	0x1014
+#define SO_PROTOCOL	0x1028
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 537de4e0ef5..7f47454ffbf 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index 04c86061970..6af2866a4f0 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index d5cf7400540..f3859fb0990 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -59,6 +59,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 57c3d4054e8..8dab3486ffa 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -57,5 +57,7 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 602518a70a1..ba770d09cd6 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 745421225ec..091cd9d47d0 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -66,4 +66,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index be7ed589af5..d36f5928fb7 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index ca87f938b03..060cb7ed024 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 82593686031..96bf8bfa935 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -66,4 +66,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_MICROBLAZE_SOCKET_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 2abca178016..289ce5f5f2a 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -42,6 +42,7 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 #define SO_SNDTIMEO	0x1005	/* send timeout */
 #define SO_RCVTIMEO 	0x1006	/* receive timeout */
 #define SO_ACCEPTCONN	0x1009
+#define SO_PROTOCOL	0x1028	/* protocol type */
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index fb5daf438ec..19d7cf709b7 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 885472bf7b7..a658b09df62 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -24,6 +24,7 @@
 #define SO_RCVTIMEO	0x1006
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
+#define SO_PROTOCOL	0x1028
 #define SO_PEERNAME	0x2000
 
 #define SO_NO_CHECK	0x400b
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 1e5cfad0e3f..609049d7117 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -64,4 +64,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index 02330c50241..65baa9a83ab 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -65,4 +65,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 982a12f959f..9cbbfafd053 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -29,6 +29,8 @@
 #define SO_RCVBUFFORCE	0x100b
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
+#define SO_PROTOCOL	0x1028
+
 
 /* Linux specific, keep the same. */
 #define SO_NO_CHECK	0x000b
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index ca8bf2cd0ba..1077d2535a3 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_X86_SOCKET_H */
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index dd1a7a4a1ce..e47f172142f 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -68,4 +68,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif	/* _XTENSA_SOCKET_H */
-- 
cgit v1.2.3


From 0d6038ee76f2e06b79d0465807f67e86bf4025de Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Tue, 4 Aug 2009 07:28:29 +0000
Subject: net: implement a SO_DOMAIN getsockoption
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This sockopt goes in line with SO_TYPE and SO_PROTOCOL. It makes it
possible for userspace programs to pass around file descriptors — I
am referring to arguments-to-functions, but it may even work for the
fd passing over UNIX sockets — without needing to also pass the
auxiliary information (PF_INET6/IPPROTO_TCP).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/alpha/include/asm/socket.h      | 1 +
 arch/arm/include/asm/socket.h        | 1 +
 arch/avr32/include/asm/socket.h      | 1 +
 arch/cris/include/asm/socket.h       | 1 +
 arch/frv/include/asm/socket.h        | 1 +
 arch/h8300/include/asm/socket.h      | 1 +
 arch/ia64/include/asm/socket.h       | 1 +
 arch/m32r/include/asm/socket.h       | 1 +
 arch/m68k/include/asm/socket.h       | 1 +
 arch/microblaze/include/asm/socket.h | 1 +
 arch/mips/include/asm/socket.h       | 1 +
 arch/mn10300/include/asm/socket.h    | 1 +
 arch/parisc/include/asm/socket.h     | 1 +
 arch/powerpc/include/asm/socket.h    | 1 +
 arch/s390/include/asm/socket.h       | 1 +
 arch/sparc/include/asm/socket.h      | 1 +
 arch/x86/include/asm/socket.h        | 1 +
 arch/xtensa/include/asm/socket.h     | 1 +
 18 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 2f8b4d37774..26773e3246e 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -33,6 +33,7 @@
 #define	SO_SNDTIMEO	0x1013
 #define SO_ACCEPTCONN	0x1014
 #define SO_PROTOCOL	0x1028
+#define SO_DOMAIN	0x1029
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 7f47454ffbf..92ac61d294f 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index 6af2866a4f0..fe863f9794d 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index f3859fb0990..45ec49bdb7b 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -60,6 +60,7 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 8dab3486ffa..2dea726095c 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -58,6 +58,7 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index ba770d09cd6..1547f01c8e2 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 091cd9d47d0..0b0d5ff062e 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -67,5 +67,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index d36f5928fb7..3390a864f22 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index 060cb7ed024..eee01cce921 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 96bf8bfa935..7361ae7cfcd 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -67,5 +67,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_MICROBLAZE_SOCKET_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 289ce5f5f2a..ae05accd9fe 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -43,6 +43,7 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 #define SO_RCVTIMEO 	0x1006	/* receive timeout */
 #define SO_ACCEPTCONN	0x1009
 #define SO_PROTOCOL	0x1028	/* protocol type */
+#define SO_DOMAIN	0x1029	/* domain/socket family */
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index 19d7cf709b7..4df75af29d7 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index a658b09df62..960b1e5d8e1 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -25,6 +25,7 @@
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
 #define SO_PROTOCOL	0x1028
+#define SO_DOMAIN	0x1029
 #define SO_PEERNAME	0x2000
 
 #define SO_NO_CHECK	0x400b
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 609049d7117..3ab8b3e6feb 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -65,5 +65,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index 65baa9a83ab..e42df89a0b8 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -66,5 +66,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 9cbbfafd053..3a5ae3d1208 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -30,6 +30,7 @@
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
 #define SO_PROTOCOL	0x1028
+#define SO_DOMAIN	0x1029
 
 
 /* Linux specific, keep the same. */
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index 1077d2535a3..b2a8c74f2d0 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_X86_SOCKET_H */
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index e47f172142f..beb3a6bdb61 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -69,5 +69,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif	/* _XTENSA_SOCKET_H */
-- 
cgit v1.2.3


From 0a51810aa058a0a4ac76dd6f87f4d10bee774e2e Mon Sep 17 00:00:00 2001
From: Andrew Victor <linux@maxim.org.za>
Date: Tue, 4 Aug 2009 19:55:56 +0100
Subject: ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers

Stop referencing CLOCK_TICK_RATE in the KS8695 drivers, rather refer
to a KS8695_CLOCK_RATE.
Issue pointed out by Russell King on arm-linux-kernel mailing list.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ks8695/include/mach/hardware.h | 5 +++++
 arch/arm/mach-ks8695/include/mach/timex.h    | 5 +++--
 2 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
index 1d640d075b7..e0f911d9e02 100644
--- a/arch/arm/mach-ks8695/include/mach/hardware.h
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -16,6 +16,11 @@
 
 #include <asm/sizes.h>
 
+/*
+ * Clocks are derived from MCLK, which is 25Mhz
+ */
+#define KS8695_CLOCK_RATE	25000000
+
 /*
  * Physical RAM address.
  */
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
index 4682e350369..10f716371bd 100644
--- a/arch/arm/mach-ks8695/include/mach/timex.h
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -14,7 +14,8 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE 	KS8695_CLOCK_RATE
 
 #endif
-- 
cgit v1.2.3


From 65a5053b764a42d33b334ba55810bb5b56eb92df Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 4 Aug 2009 23:20:45 +0100
Subject: ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for
 CRUNCH

preserve_crunch_context() calls __copy_to_user() which expects the
destination address to be in __user space.  setup_sigframe() properly
passes the destination address.

restore_crunch_context() calls __copy_from_user() which expects the
source address to be in __user space.  restore_sigframe() properly
passes the source address.

This fixes {preserve/restore}_crunch_context() to accept the
address as __user space and resolves the following sparse warnings:

  arch/arm/kernel/signal.c:146:31:
     warning: incorrect type in argument 1 (different address spaces)
        expected void [noderef] <asn:1>*to
        got struct crunch_sigframe *frame

  arch/arm/kernel/signal.c:156:38:
     warning: incorrect type in argument 2 (different address spaces)
        expected void const [noderef] <asn:1>*from
        got struct crunch_sigframe *frame

  arch/arm/kernel/signal.c:250:48:
     warning: incorrect type in argument 1 (different address spaces)
        expected struct crunch_sigframe *frame
        got struct crunch_sigframe [noderef] <asn:1>*<noident>

  arch/arm/kernel/signal.c:365:49:
     warning: incorrect type in argument 1 (different address spaces)
        expected struct crunch_sigframe *frame
        got struct crunch_sigframe [noderef] <asn:1>*<noident>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7e..f6bc5d44278 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 }
 
 #ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe *frame)
+static int preserve_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;
@@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame)
 	return __copy_to_user(frame, kframe, sizeof(*frame));
 }
 
-static int restore_crunch_context(struct crunch_sigframe *frame)
+static int restore_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;
-- 
cgit v1.2.3


From c0c60c4b9ab45bb02b20796401dd6a90770fd0ee Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 4 Aug 2009 23:38:06 +0100
Subject: ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>

<linux/clk.h> should be included to get the base API prototypes.

This fixes the following sparse warnings:

  arch/arm/common/clkdev.c:65:12:
    warning: symbol 'clk_get_sys' was not declared. Should it be static?

  arch/arm/common/clkdev.c:79:12:
    warning: symbol 'clk_get' was not declared. Should it be static?

  arch/arm/common/clkdev.c:87:6:
    warning: symbol 'clk_put' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/clkdev.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index f37afd9422f..aae5bc01acc 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/mutex.h>
+#include <linux/clk.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
-- 
cgit v1.2.3


From 07868b086cca784f4b532fc2ab574ec3a73b468a Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Wed, 29 Jul 2009 03:33:51 +0200
Subject: tracing/function-graph-tracer: Drop the useless nmi protection

The function graph tracer used to have a protection against NMI
while entering a function entry tracing. But this is useless now,
this tracer is reentrant and the ring buffer supports the NMI tracing.
We can then drop this protection.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/ftrace.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index d94e1ea3b9f..8e9663413b7 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -417,10 +417,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	unsigned long return_hooker = (unsigned long)
 				&return_to_handler;
 
-	/* Nmi's are currently unsupported */
-	if (unlikely(in_nmi()))
-		return;
-
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-- 
cgit v1.2.3


From 53a27b39ff4d2492f84b1fdc2f0047175f0b0b93 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 5 Aug 2009 15:43:58 -0300
Subject: KVM: MMU: limit rmap chain length

Otherwise the host can spend too long traversing an rmap chain, which
happens under a spinlock.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 33 ++++++++++++++++++++++++++++-----
 1 file changed, 28 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 49a10d00830..0ef5bb2b404 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -489,16 +489,20 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
  *
  * If rmapp bit zero is one, (then rmap & ~1) points to a struct kvm_rmap_desc
  * containing more mappings.
+ *
+ * Returns the number of rmap entries before the spte was added or zero if
+ * the spte was not added.
+ *
  */
-static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 {
 	struct kvm_mmu_page *sp;
 	struct kvm_rmap_desc *desc;
 	unsigned long *rmapp;
-	int i;
+	int i, count = 0;
 
 	if (!is_rmap_pte(*spte))
-		return;
+		return count;
 	gfn = unalias_gfn(vcpu->kvm, gfn);
 	sp = page_header(__pa(spte));
 	sp->gfns[spte - sp->spt] = gfn;
@@ -515,8 +519,10 @@ static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	} else {
 		rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
 		desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
-		while (desc->shadow_ptes[RMAP_EXT-1] && desc->more)
+		while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
 			desc = desc->more;
+			count += RMAP_EXT;
+		}
 		if (desc->shadow_ptes[RMAP_EXT-1]) {
 			desc->more = mmu_alloc_rmap_desc(vcpu);
 			desc = desc->more;
@@ -525,6 +531,7 @@ static void rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 			;
 		desc->shadow_ptes[i] = spte;
 	}
+	return count;
 }
 
 static void rmap_desc_remove_entry(unsigned long *rmapp,
@@ -754,6 +761,19 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
 	return young;
 }
 
+#define RMAP_RECYCLE_THRESHOLD 1000
+
+static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+{
+	unsigned long *rmapp;
+
+	gfn = unalias_gfn(vcpu->kvm, gfn);
+	rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+
+	kvm_unmap_rmapp(vcpu->kvm, rmapp);
+	kvm_flush_remote_tlbs(vcpu->kvm);
+}
+
 int kvm_age_hva(struct kvm *kvm, unsigned long hva)
 {
 	return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
@@ -1741,6 +1761,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 {
 	int was_rmapped = 0;
 	int was_writeble = is_writeble_pte(*shadow_pte);
+	int rmap_count;
 
 	pgprintk("%s: spte %llx access %x write_fault %d"
 		 " user_fault %d gfn %lx\n",
@@ -1782,9 +1803,11 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 
 	page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
 	if (!was_rmapped) {
-		rmap_add(vcpu, shadow_pte, gfn, largepage);
+		rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
 		if (!is_rmap_pte(*shadow_pte))
 			kvm_release_pfn_clean(pfn);
+		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
+			rmap_recycle(vcpu, gfn, largepage);
 	} else {
 		if (was_writeble)
 			kvm_release_pfn_dirty(pfn);
-- 
cgit v1.2.3


From e0d82a0a4e9841b787e6431ccfbb515546c55dc2 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 6 Aug 2009 21:16:44 +1000
Subject: perf_counter/powerpc: Check oprofile_cpu_type for NULL before using
 it

If the current CPU doesn't support performance counters,
cur_cpu_spec->oprofile_cpu_type can be NULL. The current
perf_counter modules don't test for that case and would thus
crash at boot time.

Bug reported by David Woodhouse.

Reported-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
LKML-Reference: <19066.48028.446975.501454@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/kernel/mpc7450-pmu.c | 3 ++-
 arch/powerpc/kernel/power4-pmu.c  | 3 ++-
 arch/powerpc/kernel/power5+-pmu.c | 5 +++--
 arch/powerpc/kernel/power5-pmu.c  | 3 ++-
 arch/powerpc/kernel/power6-pmu.c  | 3 ++-
 arch/powerpc/kernel/power7-pmu.c  | 3 ++-
 arch/powerpc/kernel/ppc970-pmu.c  | 5 +++--
 7 files changed, 16 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index c244133c67a..cc466d039af 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -407,7 +407,8 @@ struct power_pmu mpc7450_pmu = {
 
 static int init_mpc7450_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/7450"))
 		return -ENODEV;
 
 	return register_power_pmu(&mpc7450_pmu);
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
index db90b0c5c27..3c90a3d9173 100644
--- a/arch/powerpc/kernel/power4-pmu.c
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -606,7 +606,8 @@ static struct power_pmu power4_pmu = {
 
 static int init_power4_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power4"))
 		return -ENODEV;
 
 	return register_power_pmu(&power4_pmu);
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index f4adca8e98a..31918af3e35 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -678,8 +678,9 @@ static struct power_pmu power5p_pmu = {
 
 static int init_power5p_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
-	    && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5+")
+	     && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5++")))
 		return -ENODEV;
 
 	return register_power_pmu(&power5p_pmu);
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index 29b2c6c0e83..867f6f66396 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -618,7 +618,8 @@ static struct power_pmu power5_pmu = {
 
 static int init_power5_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power5"))
 		return -ENODEV;
 
 	return register_power_pmu(&power5_pmu);
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index 09ae5bf5bda..fa21890531d 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -537,7 +537,8 @@ static struct power_pmu power6_pmu = {
 
 static int init_power6_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power6"))
 		return -ENODEV;
 
 	return register_power_pmu(&power6_pmu);
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 5a9f5cbd40a..388cf57ad82 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -366,7 +366,8 @@ static struct power_pmu power7_pmu = {
 
 static int init_power7_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/power7"))
 		return -ENODEV;
 
 	return register_power_pmu(&power7_pmu);
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 833097ac45d..75dccb71a04 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -488,8 +488,9 @@ static struct power_pmu ppc970_pmu = {
 
 static int init_ppc970_pmu(void)
 {
-	if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
-	    && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP"))
+	if (!cur_cpu_spec->oprofile_cpu_type ||
+	    (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970")
+	     && strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc64/970MP")))
 		return -ENODEV;
 
 	return register_power_pmu(&ppc970_pmu);
-- 
cgit v1.2.3


From 9f26e659d8caf5820c51b9c695f0a313e636b99c Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 14:51:30 +0000
Subject: sh: kfr2r09 board support - LCDC panel

This patch adds support for the WQVGA LCD display used by
the KFR2R09 board. The LCD module is a TX07D34VM0AAA made
by Hitachi, and this module is made up by a R61517 chip
together with a 240x400 pixel display. The screen is
attached to the SuperH Mobile LCDC using a 18-bit SYS bus.

The register settings used by the SYS panel setup code are
based on an out-of-tree driver which apart from duplicating
all LCDC driver code and writing to non-existing hardware
registers also never was posted for upstream merge.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/Makefile        |   1 +
 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c     | 332 ++++++++++++++++++++++++++++
 arch/sh/boards/mach-kfr2r09/setup.c         |  94 ++++++++
 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h |  21 ++
 4 files changed, 448 insertions(+)
 create mode 100644 arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
 create mode 100644 arch/sh/include/mach-kfr2r09/mach/kfr2r09.h

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
index 77037567633..5d5867826e3 100644
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -1 +1,2 @@
 obj-y	 := setup.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	+=  lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
new file mode 100644
index 00000000000..8ccb1cc8b58
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -0,0 +1,332 @@
+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+	0x02, /* WEMODE: 1=cont, 0=one-shot */
+	0x00, 0x00,
+	0x00, /* EPF, DFM */
+	0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+	0x0b,
+	0x63, /* 400 lines */
+	0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+	0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+	0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+	0x01, 0x02, 0x08, 0x23,	0x03, 0x0c, 0x00, 0x06,	0x00, 0x00,
+	0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+	0x07, 0xc5, 0xdc, 0x02,	0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+			      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so,
+		      int i, unsigned long v)
+{
+	if (i)
+		so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+	else
+		so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so,
+		       unsigned char const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i++)
+		write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+				      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long device_code;
+
+	/* access protect OFF */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* deep standby OFF */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* device code command */
+	write_reg(sohandle, so, 0, 0xbf);
+	mdelay(50);
+
+	/* dummy read */
+	read_reg(sohandle, so);
+
+	/* read device code */
+	device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+	device_code |= (read_reg(sohandle, so) & 0xff);
+
+	return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+			       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	int i;
+
+	/* write start */
+	write_memory_start(sohandle, so);
+
+	/* paint it black */
+	for (i = 0; i < (240 * 400); i++)
+		write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* access protect off */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* exit deep standby mode */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* frame memory I/F */
+	write_reg(sohandle, so, 0, 0xb3);
+	write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+	/* display mode and frame memory write mode */
+	write_reg(sohandle, so, 0, 0xb4);
+	write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+	/* panel */
+	write_reg(sohandle, so, 0, 0xc0);
+	write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+	/* timing (normal) */
+	write_reg(sohandle, so, 0, 0xc1);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (partial) */
+	write_reg(sohandle, so, 0, 0xc2);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (idle) */
+	write_reg(sohandle, so, 0, 0xc3);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (source/VCOM/gate driving) */
+	write_reg(sohandle, so, 0, 0xc4);
+	write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+	/* gamma (red) */
+	write_reg(sohandle, so, 0, 0xc8);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (green) */
+	write_reg(sohandle, so, 0, 0xc9);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (blue) */
+	write_reg(sohandle, so, 0, 0xca);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* power (common) */
+	write_reg(sohandle, so, 0, 0xd0);
+	write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+	/* VCOM */
+	write_reg(sohandle, so, 0, 0xd1);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x0f);
+	write_reg(sohandle, so, 1, 0x02);
+
+	/* power (normal) */
+	write_reg(sohandle, so, 0, 0xd2);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (partial) */
+	write_reg(sohandle, so, 0, 0xd3);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (idle) */
+	write_reg(sohandle, so, 0, 0xd4);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	write_reg(sohandle, so, 0, 0xd8);
+	write_reg(sohandle, so, 1, 0x77);
+	write_reg(sohandle, so, 1, 0x77);
+
+	/* TE signal */
+	write_reg(sohandle, so, 0, 0x35);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* TE signal line */
+	write_reg(sohandle, so, 0, 0x44);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* column address */
+	write_reg(sohandle, so, 0, 0x2a);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0xef);
+
+	/* page address */
+	write_reg(sohandle, so, 0, 0x2b);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x01);
+	write_reg(sohandle, so, 1, 0x8f);
+
+	/* exit sleep mode */
+	write_reg(sohandle, so, 0, 0x11);
+
+	mdelay(120);
+
+	/* clear vram */
+	clear_memory(sohandle, so);
+
+	/* display ON */
+	write_reg(sohandle, so, 0, 0x29);
+	mdelay(1);
+
+	write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *board_data, void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* power on */
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	gpio_set_value(GPIO_PTE4, 0);  /* LCD_RST/ -> L */
+	gpio_set_value(GPIO_PTF4, 1);  /* PROTECT/ -> H */
+	udelay(1100);
+	gpio_set_value(GPIO_PTE4, 1);  /* LCD_RST/ -> H */
+	udelay(10);
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	mdelay(20);
+
+	if (read_device_code(sohandle, so) != 0x01221517)
+		return -ENODEV;
+
+	pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+	display_on(sohandle, so);
+	return 0;
+}
+
+#define CTRL_CKSW       0x10
+#define CTRL_C10        0x20
+#define CTRL_CPSW       0x80
+#define MAIN_MLED4      0x40
+#define MAIN_MSW        0x80
+
+static int kfr2r09_lcd_backlight(int on)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	buf[0] = 0x00;
+	if (on)
+		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0x01;
+	if (on)
+		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
+	else
+		buf[1] = 0;
+
+	msg.addr = 0x75;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+void kfr2r09_lcd_on(void *board_data)
+{
+	kfr2r09_lcd_backlight(1);
+}
+
+void kfr2r09_lcd_off(void *board_data)
+{
+	kfr2r09_lcd_backlight(0);
+}
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index bf5f8f8d3b5..13550804090 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -15,11 +15,13 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
 
 static struct mtd_partition kfr2r09_nor_flash_partitions[] =
 {
@@ -97,9 +99,70 @@ static struct platform_device kfr2r09_sh_keysc_device = {
 	},
 };
 
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS18,
+		.clock_divider = 6,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_cfg = {
+			.name = "TX07D34VM0AAA",
+			.xres = 240,
+			.yres = 400,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 0,
+			.lower_margin = 1,
+			.vsync_len = 1,
+			.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		},
+		.lcd_size_cfg = {
+			.width = 35,
+			.height = 58,
+		},
+		.board_cfg = {
+			.setup_sys = kfr2r09_lcd_setup,
+			.display_on = kfr2r09_lcd_on,
+			.display_off = kfr2r09_lcd_off,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x07010904,
+			.ldmt3r = 0x14012914,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+	.resource	= kfr2r09_sh_lcdc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_lcdc_info,
+	},
+};
+
 static struct platform_device *kfr2r09_devices[] __initdata = {
 	&kfr2r09_nor_flash_device,
 	&kfr2r09_sh_keysc_device,
+	&kfr2r09_sh_lcdc_device,
 };
 
 #define BSC_CS0BCR 0xfec10004
@@ -128,6 +191,37 @@ static int __init kfr2r09_devices_setup(void)
 	gpio_request(GPIO_FN_KEYIN4, NULL);
 	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
 
+	/* setup LCDC pins for SYS panel */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+	gpio_direction_output(GPIO_PTE4, 1);
+	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+	gpio_direction_output(GPIO_PTF4, 1);
+	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+	gpio_direction_output(GPIO_PTU0, 1);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }
diff --git a/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
new file mode 100644
index 00000000000..174374e1954
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_KFR2R09_H
+#define __ASM_SH_KFR2R09_H
+
+#include <video/sh_mobile_lcdc.h>
+
+#ifdef CONFIG_FB_SH_MOBILE_LCDC
+void kfr2r09_lcd_on(void *board_data);
+void kfr2r09_lcd_off(void *board_data);
+int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+#else
+static inline void kfr2r09_lcd_on(void *board_data) {}
+static inline void kfr2r09_lcd_off(void *board_data) {}
+static inline int kfr2r09_lcd_setup(void *board_data, void *sys_ops_handle,
+				    struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __ASM_SH_KFR2R09_H */
-- 
cgit v1.2.3


From 33893d7aa00057d067527e0d8c210190efade8f1 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 14:58:43 +0000
Subject: sh: kfr2r09 board support - NAND flash

This patch adds support for the NAND flash chip
attached to CS4 on the KFR2R09 board. The device is
driven by the platform device driver "onenand-flash".

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 13550804090..bdb10c29ef1 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
@@ -62,6 +63,21 @@ static struct platform_device kfr2r09_nor_flash_device = {
 	},
 };
 
+static struct resource kfr2r09_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x10000000,
+		.end		= 0x1001ffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+	.name		= "onenand-flash",
+	.resource	= kfr2r09_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
 static struct sh_keysc_info kfr2r09_sh_keysc_info = {
 	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
 	.scan_timing = 3,
@@ -161,12 +177,15 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
 
 static struct platform_device *kfr2r09_devices[] __initdata = {
 	&kfr2r09_nor_flash_device,
+	&kfr2r09_nand_flash_device,
 	&kfr2r09_sh_keysc_device,
 	&kfr2r09_sh_lcdc_device,
 };
 
 #define BSC_CS0BCR 0xfec10004
 #define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
 
 static int __init kfr2r09_devices_setup(void)
 {
@@ -178,6 +197,10 @@ static int __init kfr2r09_devices_setup(void)
 	ctrl_outl(0x36db0400, BSC_CS0BCR);
 	ctrl_outl(0x00000500, BSC_CS0WCR);
 
+	/* setup NAND flash at CS4 */
+	ctrl_outl(0x36db0400, BSC_CS4BCR);
+	ctrl_outl(0x00000500, BSC_CS4WCR);
+
 	/* setup KEYSC pins */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
 	gpio_request(GPIO_FN_KEYOUT1, NULL);
-- 
cgit v1.2.3


From 7766e16beec3363516306754c9c51a85747d734d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 15:03:43 +0000
Subject: sh: LED9, LED10 and LED11 support for Solution Engine 7724

This patch adds support for LED9, LED10 and LED11 on
the Solution Engine 7724 board. If CONFIG_PM is enabled
then these LEDs are used to show the hardware sleep
mode used by the processor. Useful to debug cpuidle.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 957ed176ea2..36a4ca3a900 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -429,6 +429,32 @@ static int __init devices_setup(void)
 	/* turn on USB clocks, use external clock */
 	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
 
+#ifdef CONFIG_PM
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
+	/* Lit LED9 */
+	gpio_request(GPIO_PTJ6, NULL);
+	gpio_direction_output(GPIO_PTJ6, 1);
+	gpio_export(GPIO_PTJ6, 0);
+
+	/* Lit LED10 */
+	gpio_request(GPIO_PTJ5, NULL);
+	gpio_direction_output(GPIO_PTJ5, 1);
+	gpio_export(GPIO_PTJ5, 0);
+
+	/* Lit LED11 */
+	gpio_request(GPIO_PTJ7, NULL);
+	gpio_direction_output(GPIO_PTJ7, 1);
+	gpio_export(GPIO_PTJ7, 0);
+#endif
+
 	/* enable USB0 port */
 	ctrl_outw(0x0600, 0xa40501d4);
 
-- 
cgit v1.2.3


From 2d2bcd319a3d1412999cdfc72ad64eec992dc37e Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 7 Aug 2009 03:58:38 +0900
Subject: sh: fix romImage mach dir usage

This patch moves all the romImage related header files into
the mach/ directory.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/romimage/head.S                       |   2 +-
 arch/sh/include/mach-common/mach/romimage.h        |   1 +
 arch/sh/include/mach-common/romimage.h             |   1 -
 .../mach-kfr2r09/mach/partner-jet-setup.txt        | 134 +++++++++++++++++++++
 arch/sh/include/mach-kfr2r09/mach/romimage.h       |  75 ++++++++++++
 arch/sh/include/mach-kfr2r09/partner-jet-setup.txt | 134 ---------------------
 arch/sh/include/mach-kfr2r09/romimage.h            |  75 ------------
 7 files changed, 211 insertions(+), 211 deletions(-)
 create mode 100644 arch/sh/include/mach-common/mach/romimage.h
 delete mode 100644 arch/sh/include/mach-common/romimage.h
 create mode 100644 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
 create mode 100644 arch/sh/include/mach-kfr2r09/mach/romimage.h
 delete mode 100644 arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
 delete mode 100644 arch/sh/include/mach-kfr2r09/romimage.h

(limited to 'arch')

diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 97a087bc9c4..219bc626dd7 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -7,4 +7,4 @@
 .text
 	.global	romstart
 romstart:
-#include <romimage.h>
+#include <mach/romimage.h>
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
new file mode 100644
index 00000000000..267e24112d8
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -0,0 +1 @@
+/* do nothing here by default */
diff --git a/arch/sh/include/mach-common/romimage.h b/arch/sh/include/mach-common/romimage.h
deleted file mode 100644
index 267e24112d8..00000000000
--- a/arch/sh/include/mach-common/romimage.h
+++ /dev/null
@@ -1 +0,0 @@
-/* do nothing here by default */
diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
new file mode 100644
index 00000000000..9c85088728a
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
@@ -0,0 +1,134 @@
+LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
+LIST "set up enough of the kfr2r09 hardware to boot the kernel"
+
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "select mode for cs5 + cs6"
+ED 0xff800020, 0xa5a50001
+ED 0xfec10000, 0x0000001b
+
+LIST "setup clocks"
+ED 0xa4150004, 0x00000050
+ED 0xa4150000, 0x91053508
+WAIT 1
+ED 0xa4150024, 0x00005000
+
+LIST "setup pins"
+EB 0xa4050120, 0x00
+EB 0xa4050122, 0x00
+EB 0xa4050124, 0x00
+EB 0xa4050126, 0x00
+EB 0xa4050128, 0xA0
+EB 0xa405012A, 0x10
+EB 0xa405012C, 0x00
+EB 0xa405012E, 0x00
+EB 0xa4050130, 0x00
+EB 0xa4050132, 0x00
+EB 0xa4050134, 0x01
+EB 0xa4050136, 0x40
+EB 0xa4050138, 0x00
+EB 0xa405013A, 0x00
+EB 0xa405013C, 0x00
+EB 0xa405013E, 0x20
+EB 0xa4050160, 0x00
+EB 0xa4050162, 0x40
+EB 0xa4050164, 0x03
+EB 0xa4050166, 0x00
+EB 0xa4050168, 0x00
+EB 0xa405016A, 0x00
+EB 0xa405016C, 0x00
+
+EW 0xa405014E, 0x5660
+EW 0xa4050150, 0x0145
+EW 0xa4050152, 0x1550
+EW 0xa4050154, 0x0200
+EW 0xa4050156, 0x0040
+
+EW 0xa4050158, 0x0000
+EW 0xa405015a, 0x0000
+EW 0xa405015c, 0x0000
+EW 0xa405015e, 0x0000
+
+EW 0xa4050180, 0x0000
+EW 0xa4050182, 0x8002
+EW 0xa4050184, 0x0000
+
+EW 0xa405018a, 0x9991
+EW 0xa405018c, 0x8011
+EW 0xa405018e, 0x9550
+
+EW 0xa4050100, 0x0000
+EW 0xa4050102, 0x5540
+EW 0xa4050104, 0x0000
+EW 0xa4050106, 0x0000
+EW 0xa4050108, 0x4550
+EW 0xa405010a, 0x0130
+EW 0xa405010c, 0x0555
+EW 0xa405010e, 0x0000
+EW 0xa4050110, 0x0000
+EW 0xa4050112, 0xAAA8
+EW 0xa4050114, 0x8305
+EW 0xa4050116, 0x10F0
+EW 0xa4050118, 0x0F50
+EW 0xa405011a, 0x0000
+EW 0xa405011c, 0x0000
+EW 0xa405011e, 0x0555
+EW 0xa4050140, 0x0000
+EW 0xa4050142, 0x5141
+EW 0xa4050144, 0x5005
+EW 0xa4050146, 0xAAA9
+EW 0xa4050148, 0xFAA9
+EW 0xa405014a, 0x3000
+EW 0xa405014c, 0x0000
+
+LIST "setup sdram"
+ED 0xFD000108, 0x40000301
+ED 0xFD000020, 0x011B0002
+ED 0xFD000030, 0x03060E02
+ED 0xFD000034, 0x01020102
+ED 0xFD000038, 0x01090406
+ED 0xFD000008, 0x00000004
+ED 0xFD000040, 0x00000001
+ED 0xFD000040, 0x00000000
+ED 0xFD000018, 0x00000001
+
+WAIT 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000060, 0x00000032
+ED 0xFD000060, 0x00020000
+ED 0xFD000014, 0x00000004
+ED 0xFD000014, 0x00000004
+ED 0xFD000010, 0x00000001
+ED 0xFD000044, 0x000004AF
+ED 0xFD000048, 0x20CF0037
+
+LIST "read 16 bytes from sdram"
+DD 0xa8000000, 0xa8000000, 1
+DD 0xa8000004, 0xa8000004, 1
+DD 0xa8000008, 0xa8000008, 1
+DD 0xa800000c, 0xa800000c, 1
+
+ED 0xFD000014, 0x00000002
+ED 0xFD000014, 0x00000004
+ED 0xFD000108, 0x40000300
+ED 0xFD000040, 0x00010000
+
+LIST "write to internal ram"
+ED 0xfd8007fc, 0
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
new file mode 100644
index 00000000000..f5aa8e16770
--- /dev/null
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -0,0 +1,75 @@
+/* kfr2r09 board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+/* The LIST command is used to include comments in the script */
+.macro	LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro  ED, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.l r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro  EW, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.w r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro  EB, addr, data
+        mov.l 1f ,r1
+        mov.l 2f ,r0
+        mov.b r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1:	.long \addr
+2:	.long \data
+3:
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro  WAIT, time
+        mov.l  2f ,r3
+1:
+        nop
+        tst     r3, r3
+        bf/s    1b
+         dt      r3
+	bra	3f
+	 nop
+	.align 2
+2:	.long \time * 100
+3:
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro  DD, addr, addr2, nr
+        mov.l 1f ,r1
+        mov.l @r1, r0
+	bra 2f
+	 nop
+	.align 2
+1:	.long \addr
+2:
+.endm
+
+#include "partner-jet-setup.txt"
diff --git a/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
deleted file mode 100644
index 9c85088728a..00000000000
--- a/arch/sh/include/mach-kfr2r09/partner-jet-setup.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-LIST "partner-jet-setup.txt - 20090729 Magnus Damm"
-LIST "set up enough of the kfr2r09 hardware to boot the kernel"
-
-LIST "zImage (RAM boot)"
-LIST "This script can be used to boot the kernel from RAM via JTAG:"
-LIST "> < partner-jet-setup.txt"
-LIST "> RD zImage, 0xa8800000"
-LIST "> G=0xa8800000"
-
-LIST "romImage (Flash boot)"
-LIST "Use the following command to burn the zImage to flash via JTAG:"
-LIST "> RD romImage, 0"
-
-LIST "--------------------------------"
-
-LIST "disable watchdog"
-EW 0xa4520004, 0xa507
-
-LIST "select mode for cs5 + cs6"
-ED 0xff800020, 0xa5a50001
-ED 0xfec10000, 0x0000001b
-
-LIST "setup clocks"
-ED 0xa4150004, 0x00000050
-ED 0xa4150000, 0x91053508
-WAIT 1
-ED 0xa4150024, 0x00005000
-
-LIST "setup pins"
-EB 0xa4050120, 0x00
-EB 0xa4050122, 0x00
-EB 0xa4050124, 0x00
-EB 0xa4050126, 0x00
-EB 0xa4050128, 0xA0
-EB 0xa405012A, 0x10
-EB 0xa405012C, 0x00
-EB 0xa405012E, 0x00
-EB 0xa4050130, 0x00
-EB 0xa4050132, 0x00
-EB 0xa4050134, 0x01
-EB 0xa4050136, 0x40
-EB 0xa4050138, 0x00
-EB 0xa405013A, 0x00
-EB 0xa405013C, 0x00
-EB 0xa405013E, 0x20
-EB 0xa4050160, 0x00
-EB 0xa4050162, 0x40
-EB 0xa4050164, 0x03
-EB 0xa4050166, 0x00
-EB 0xa4050168, 0x00
-EB 0xa405016A, 0x00
-EB 0xa405016C, 0x00
-
-EW 0xa405014E, 0x5660
-EW 0xa4050150, 0x0145
-EW 0xa4050152, 0x1550
-EW 0xa4050154, 0x0200
-EW 0xa4050156, 0x0040
-
-EW 0xa4050158, 0x0000
-EW 0xa405015a, 0x0000
-EW 0xa405015c, 0x0000
-EW 0xa405015e, 0x0000
-
-EW 0xa4050180, 0x0000
-EW 0xa4050182, 0x8002
-EW 0xa4050184, 0x0000
-
-EW 0xa405018a, 0x9991
-EW 0xa405018c, 0x8011
-EW 0xa405018e, 0x9550
-
-EW 0xa4050100, 0x0000
-EW 0xa4050102, 0x5540
-EW 0xa4050104, 0x0000
-EW 0xa4050106, 0x0000
-EW 0xa4050108, 0x4550
-EW 0xa405010a, 0x0130
-EW 0xa405010c, 0x0555
-EW 0xa405010e, 0x0000
-EW 0xa4050110, 0x0000
-EW 0xa4050112, 0xAAA8
-EW 0xa4050114, 0x8305
-EW 0xa4050116, 0x10F0
-EW 0xa4050118, 0x0F50
-EW 0xa405011a, 0x0000
-EW 0xa405011c, 0x0000
-EW 0xa405011e, 0x0555
-EW 0xa4050140, 0x0000
-EW 0xa4050142, 0x5141
-EW 0xa4050144, 0x5005
-EW 0xa4050146, 0xAAA9
-EW 0xa4050148, 0xFAA9
-EW 0xa405014a, 0x3000
-EW 0xa405014c, 0x0000
-
-LIST "setup sdram"
-ED 0xFD000108, 0x40000301
-ED 0xFD000020, 0x011B0002
-ED 0xFD000030, 0x03060E02
-ED 0xFD000034, 0x01020102
-ED 0xFD000038, 0x01090406
-ED 0xFD000008, 0x00000004
-ED 0xFD000040, 0x00000001
-ED 0xFD000040, 0x00000000
-ED 0xFD000018, 0x00000001
-
-WAIT 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000060, 0x00000032
-ED 0xFD000060, 0x00020000
-ED 0xFD000014, 0x00000004
-ED 0xFD000014, 0x00000004
-ED 0xFD000010, 0x00000001
-ED 0xFD000044, 0x000004AF
-ED 0xFD000048, 0x20CF0037
-
-LIST "read 16 bytes from sdram"
-DD 0xa8000000, 0xa8000000, 1
-DD 0xa8000004, 0xa8000004, 1
-DD 0xa8000008, 0xa8000008, 1
-DD 0xa800000c, 0xa800000c, 1
-
-ED 0xFD000014, 0x00000002
-ED 0xFD000014, 0x00000004
-ED 0xFD000108, 0x40000300
-ED 0xFD000040, 0x00010000
-
-LIST "write to internal ram"
-ED 0xfd8007fc, 0
-
-LIST "setup cache"
-ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-kfr2r09/romimage.h b/arch/sh/include/mach-kfr2r09/romimage.h
deleted file mode 100644
index f5aa8e16770..00000000000
--- a/arch/sh/include/mach-kfr2r09/romimage.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* kfr2r09 board specific boot code:
- * converts the "partner-jet-script.txt" script into assembly
- * the assembly code is the first code to be executed in the romImage
- */
-
-/* The LIST command is used to include comments in the script */
-.macro	LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro  ED, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.l r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro  EW, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.w r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro  EB, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.b r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro  WAIT, time
-        mov.l  2f ,r3
-1:
-        nop
-        tst     r3, r3
-        bf/s    1b
-         dt      r3
-	bra	3f
-	 nop
-	.align 2
-2:	.long \time * 100
-3:
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro  DD, addr, addr2, nr
-        mov.l 1f ,r1
-        mov.l @r1, r0
-	bra 2f
-	 nop
-	.align 2
-1:	.long \addr
-2:
-.endm
-
-#include "partner-jet-setup.txt"
-- 
cgit v1.2.3


From b4a757367d36cebddcd332a4024d92f1e87af370 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 6 Aug 2009 15:16:29 +0000
Subject: sh: clean up Migo-R header file

This patch moves the Migo-R specific header file from
mach-common/ into mach-migor/ and removes unused cruft.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-common/mach/migor.h | 64 --------------------------------
 arch/sh/include/mach-migor/mach/migor.h  | 14 +++++++
 2 files changed, 14 insertions(+), 64 deletions(-)
 delete mode 100644 arch/sh/include/mach-common/mach/migor.h
 create mode 100644 arch/sh/include/mach-migor/mach/migor.h

(limited to 'arch')

diff --git a/arch/sh/include/mach-common/mach/migor.h b/arch/sh/include/mach-common/mach/migor.h
deleted file mode 100644
index e451f0229e0..00000000000
--- a/arch/sh/include/mach-common/mach/migor.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef __ASM_SH_MIGOR_H
-#define __ASM_SH_MIGOR_H
-
-/*
- * linux/include/asm-sh/migor.h
- *
- * Copyright (C) 2008 Renesas Solutions
- *
- * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <asm/addrspace.h>
-
-/* GPIO */
-#define PORT_PACR 0xa4050100
-#define PORT_PDCR 0xa4050106
-#define PORT_PECR 0xa4050108
-#define PORT_PHCR 0xa405010e
-#define PORT_PJCR 0xa4050110
-#define PORT_PKCR 0xa4050112
-#define PORT_PLCR 0xa4050114
-#define PORT_PMCR 0xa4050116
-#define PORT_PRCR 0xa405011c
-#define PORT_PTCR 0xa4050140
-#define PORT_PUCR 0xa4050142
-#define PORT_PVCR 0xa4050144
-#define PORT_PWCR 0xa4050146
-#define PORT_PXCR 0xa4050148
-#define PORT_PYCR 0xa405014a
-#define PORT_PZCR 0xa405014c
-#define PORT_PADR 0xa4050120
-#define PORT_PHDR 0xa405012e
-#define PORT_PTDR 0xa4050160
-#define PORT_PWDR 0xa4050166
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRC 0xa405015c
-
-#define PORT_MSELCRB 0xa4050182
-
-#define PORT_PSELA 0xa405014e
-#define PORT_PSELB 0xa4050150
-#define PORT_PSELC 0xa4050152
-#define PORT_PSELD 0xa4050154
-#define PORT_PSELE 0xa4050156
-
-#define PORT_HIZCRA 0xa4050158
-#define PORT_HIZCRB 0xa405015a
-#define PORT_HIZCRC 0xa405015c
-
-#define BSC_CS4BCR 0xfec10010
-#define BSC_CS6ABCR 0xfec1001c
-#define BSC_CS4WCR 0xfec10030
-
-#include <video/sh_mobile_lcdc.h>
-
-int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
-			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
-
-#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/mach-migor/mach/migor.h b/arch/sh/include/mach-migor/mach/migor.h
new file mode 100644
index 00000000000..cee6cb88e02
--- /dev/null
+++ b/arch/sh/include/mach-migor/mach/migor.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+#define PORT_MSELCRB 0xa4050182
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS6ABCR 0xfec1001c
+#define BSC_CS4WCR 0xfec10030
+
+#include <video/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
-- 
cgit v1.2.3


From 677c1dd706d9cc384730cbd52baf821923d8be9b Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 7 Aug 2009 10:39:24 +0200
Subject: [S390] kernel: Storing machine flags early in lowcore

Currently, the machine_flags are stored late in the startup
initialization which results in failing machine type checks
(e.g. for MACHINE_IS_VM).
To allow these checks, store the machine flags in the lowcore
when the machine type has been detected.

Moving the machine_flags to the lowcore has been introduced with
git commit 25097bf153391f7be4c591d47061b3dc4990dac2

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/early.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 8d15314381e..cae14c49951 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -208,6 +208,9 @@ static noinline __init void detect_machine_type(void)
 		machine_flags |= MACHINE_FLAG_KVM;
 	else
 		machine_flags |= MACHINE_FLAG_VM;
+
+	/* Store machine flags for setting up lowcore early */
+	S390_lowcore.machine_flags = machine_flags;
 }
 
 static __init void early_pgm_check_handler(void)
-- 
cgit v1.2.3


From 53cb780adbe69df90c8dc23e992ce40455e687c3 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 7 Aug 2009 10:39:25 +0200
Subject: [S390] KVM: Read buffer overflow

Check whether index is within bounds before testing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kvm/sigp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 36678835034..0ef81d6776e 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -169,7 +169,7 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 			     unsigned long *reg)
 {
 	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_local_interrupt *li = NULL;
 	struct kvm_s390_interrupt_info *inti;
 	int rc;
 	u8 tmp;
@@ -189,9 +189,10 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 		return 2; /* busy */
 
 	spin_lock(&fi->lock);
-	li = fi->local_int[cpu_addr];
+	if (cpu_addr < KVM_MAX_VCPUS)
+		li = fi->local_int[cpu_addr];
 
-	if ((cpu_addr >= KVM_MAX_VCPUS) || (li == NULL)) {
+	if (li == NULL) {
 		rc = 1; /* incorrect state */
 		*reg &= SIGP_STAT_INCORRECT_STATE;
 		kfree(inti);
-- 
cgit v1.2.3


From 8db5d1a64d36d0750b88c6c13feeaf0e00be2eb4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 12:21:38 +0200
Subject: MXC: pass base/irq to mxc_timer_init

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c               |  2 +-
 arch/arm/mach-mx2/clock_imx21.c         |  2 +-
 arch/arm/mach-mx2/clock_imx27.c         |  2 +-
 arch/arm/mach-mx3/clock-imx35.c         |  2 +-
 arch/arm/mach-mx3/clock.c               |  3 ++-
 arch/arm/plat-mxc/include/mach/common.h |  2 +-
 arch/arm/plat-mxc/time.c                | 21 ++-------------------
 7 files changed, 9 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 0d0f306851d..7b739dd8700 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -626,7 +626,7 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb88ec1..eede79855f4 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0]);
+	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c971442f3f..a0c577f80d4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -748,7 +748,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk);
+	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 577ee83d1f6..4cf1849f552 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b14239724c..25b6f55bfb0 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -29,6 +29,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/mx31.h>
 #include <mach/common.h>
 
 #include "crm_regs.h"
@@ -609,7 +610,7 @@ int __init mx31_clocks_init(unsigned long fref)
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 02c3cd004db..1c48aefe4b6 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,7 +20,7 @@ extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
-extern void mxc_timer_init(struct clk *timer_clk);
+extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a57e02..7e71bb6270e 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
-	int irq;
 
 	clk_enable(timer_clk);
 
-	if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
-		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
-		irq = TIM1_INT;
-#endif
-	} else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT1;
-#endif
-	} else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT;
-#endif
-	} else
-		BUG();
+	timer_base = base;
 
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
-- 
cgit v1.2.3


From be124c94279edf4306798100f120c386947d8724 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 12:19:02 +0200
Subject: system.c: runtime base address

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  1 +
 arch/arm/mach-mx2/generic.c             |  2 ++
 arch/arm/mach-mx3/mm.c                  |  2 ++
 arch/arm/plat-mxc/include/mach/common.h |  1 +
 arch/arm/plat-mxc/system.c              | 22 +++++++++++++---------
 5 files changed, 19 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7622c9b38c9..bbb6c7b8766 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -41,6 +41,7 @@ static struct map_desc imx_io_desc[] __initdata = {
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f69d8..bdc5a6e67be 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx21_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -79,6 +80,7 @@ void __init mx21_map_io(void)
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 1f5fdd456cb..f0d5ae533b4 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -75,6 +75,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx31_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -82,6 +83,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1c48aefe4b6..1dc31d6dd43 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -29,5 +29,6 @@ extern int mx35_clocks_init(void);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_arch_reset_init(void __iomem *);
 
 #endif
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 79c37577c91..15e30532f4a 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -30,29 +30,28 @@
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_ARCH_MX1
-#define WDOG_WCR_REG		IO_ADDRESS(WDT_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 0)
-#else
-#define WDOG_WCR_REG		IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 2)
-#endif
+static void __iomem *wdog_base;
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void arch_reset(char mode, const char *cmd)
 {
-	if (!cpu_is_mx1()) {
+	unsigned int wcr_enable;
+
+	if (cpu_is_mx1()) {
+		wcr_enable = (1 << 0);
+	} else {
 		struct clk *clk;
 
 		clk = clk_get_sys("imx-wdt.0", NULL);
 		if (!IS_ERR(clk))
 			clk_enable(clk);
+		wcr_enable = (1 << 2);
 	}
 
 	/* Assert SRS signal */
-	__raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -65,3 +64,8 @@ void arch_reset(char mode, const char *cmd)
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
 }
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+	wdog_base = base;
+}
-- 
cgit v1.2.3


From abae61305684fffb0f1d779a1a678855ec5e8cfc Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:22:18 +0200
Subject: mxc: remove ARCH_NR_GPIOS

Use the default value of 256 which is enough for all i.MX SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx27.h | 3 ---
 arch/arm/plat-mxc/include/mach/mx3x.h | 3 ---
 2 files changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6e93f2c0b7b..063ac352465 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -120,7 +120,4 @@ extern int mx27_revision(void);
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(192 + 16)
-
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index b559a4bb576..44ca1b700f0 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -279,9 +279,6 @@
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
 extern unsigned int system_rev;
-- 
cgit v1.2.3


From d30c74a02f7652e784c32a10736a3c88db98820c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:29:57 +0200
Subject: MXC uncompress macros: determine uart base by machine type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/uncompress.h | 60 ++++++++++++++++++++---------
 1 file changed, 42 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index de6fe036598..98c8a60214d 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -26,8 +26,11 @@
 #define __MXC_BOOT_UNCOMPRESS
 
 #include <mach/hardware.h>
+#include <asm/mach-types.h>
 
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+static unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
 
 #define USR2 0x98
 #define USR2_TXFE (1<<14)
@@ -46,19 +49,10 @@
 
 static void putc(int ch)
 {
-	static unsigned long serial_port = 0;
-
-	if (unlikely(serial_port == 0)) {
-		do {
-			serial_port = UART1_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			serial_port = UART2_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			return;
-		} while (0);
-	}
+	if (!uart_base)
+		return;
+	if (!(UART(UCR1) & UCR1_UARTEN))
+		return;
 
 	while (!(UART(USR2) & USR2_TXFE))
 		barrier();
@@ -68,11 +62,41 @@ static void putc(int ch)
 
 #define flush() do { } while (0)
 
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+#define MX1_UART1_BASE_ADDR	0x00206000
+#define MX2X_UART1_BASE_ADDR	0x1000a000
+#define MX3X_UART1_BASE_ADDR	0x43F90000
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	switch (arch_id) {
+	case MACH_TYPE_MX1ADS:
+	case MACH_TYPE_SCB9328:
+		uart_base = MX1_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_IMX27LITE:
+	case MACH_TYPE_MX27_3DS:
+	case MACH_TYPE_MX27ADS:
+	case MACH_TYPE_PCM038:
+	case MACH_TYPE_MX21ADS:
+		uart_base = MX2X_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_MX31LITE:
+	case MACH_TYPE_ARMADILLO5X0:
+	case MACH_TYPE_MX31MOBOARD:
+	case MACH_TYPE_QONG:
+	case MACH_TYPE_MX31_3DS:
+	case MACH_TYPE_PCM037:
+	case MACH_TYPE_MX31ADS:
+	case MACH_TYPE_MX35_3DS:
+	case MACH_TYPE_PCM043:
+		uart_base = MX3X_UART1_BASE_ADDR;
+		break;
+	default:
+		break;
+	}
+}
 
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
 #define arch_decomp_wdog()
 
 #endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
-- 
cgit v1.2.3


From ccc1a6f8eebf0eb8a5bee16293d1dc9b5eab1be3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:45:37 +0200
Subject: MXC: remove board specific setup of MXC_LL_UART_[PV]ADDR

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../arm/plat-mxc/include/mach/board-armadillo5x0.h |  7 ---
 arch/arm/plat-mxc/include/mach/board-mx21ads.h     |  6 ---
 arch/arm/plat-mxc/include/mach/board-mx27ads.h     |  6 ---
 arch/arm/plat-mxc/include/mach/board-mx27lite.h    |  5 --
 arch/arm/plat-mxc/include/mach/board-mx27pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31ads.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31lilly.h   |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31lite.h    |  3 --
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx35pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm037.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm038.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm043.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-qong.h        |  5 --
 arch/arm/plat-mxc/include/mach/debug-macro.S       | 59 ++++++++--------------
 arch/arm/plat-mxc/include/mach/mx1.h               |  4 --
 17 files changed, 21 insertions(+), 119 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
index 8769e910e55..0376c133c9f 100644
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -12,11 +12,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 #define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 
-#include <mach/hardware.h>
-
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
index 06701df74c4..0cf4fa29510 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -14,12 +14,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 #define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * Memory-mapped I/O on MX21ADS base board
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index d42f4e6116f..7776d230327 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -25,12 +25,6 @@
 #define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
 				MXC_MAX_VIRTUAL_INTS)
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * @name Memory Size parameters
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
index a870f8ea244..ea87551d273 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
index 552b55d714d..fec1bcfa916 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 06e6895f7f6..2cbfa35e82f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,9 +114,4 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index 78cf31e22e4..eb5a5024622 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -22,11 +22,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31lilly_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 52fbdf2d6f2..8e64325d690 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,8 +11,5 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 303fd2434a2..d5be6b5a6ac 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31moboard_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 519bab3eb28..2bbd6ed17f5 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* Definitions for components on the Debug board */
 
 /* Base address of CPLD controller on the Debug board */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 1111037d6d9..383f1c04df0 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index f0a1fa1938a..13411709b13 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 4fcd7499e09..410f9786ed2 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index 15fbdf16abc..1ac4e1682e5 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
 #define __ASM_ARCH_MXC_BOARD_PCM043_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 04033ec637d..6d88c7af4b2 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* NOR FLASH */
 #define QONG_NOR_SIZE		(128*1024*1024)
 
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bbc5f6753cf..4f85acd74af 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -11,52 +11,35 @@
  *
  */
 
-#include <mach/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <mach/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <mach/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <mach/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <mach/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_MX21ADS
-#include <mach/board-mx21ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <mach/board-pcm038.h>
+#ifdef CONFIG_ARCH_MX1
+#include <mach/mx1.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX31_3DS
-#include <mach/board-mx31pdk.h>
-#endif
-#ifdef CONFIG_MACH_QONG
-#include <mach/board-qong.h>
-#endif
-#ifdef CONFIG_MACH_PCM043
-#include <mach/board-pcm043.h>
-#endif
-#ifdef CONFIG_MACH_MX27_3DS
-#include <mach/board-mx27pdk.h>
+
+#ifdef CONFIG_ARCH_MX2
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_ARMADILLO5X0
-#include <mach/board-armadillo5x0.h>
+#include <mach/mx2x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPI_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX35_3DS
-#include <mach/board-mx35pdk.h>
+
+#ifdef CONFIG_ARCH_MX3
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_MX27LITE
-#include <mach/board-mx27lite.h>
+#include <mach/mx3x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
+
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
-		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		ldreq	\rx, =UART_PADDR	@ physical
+		ldrne	\rx, =UART_VADDR	@ virtual
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1000bf330bc..786836965cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,8 +179,4 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_DEBUG_LL */
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /*  __ASM_ARCH_MXC_MX1_H__ */
-- 
cgit v1.2.3


From 12308dfe3776ff5741fc675f2a352165e1628098 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:33:58 +0200
Subject: mxc: remove do not include directly

Everyone should be free to include the files he actually needs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx1.h  | 4 ----
 arch/arm/plat-mxc/include/mach/mx21.h | 5 -----
 arch/arm/plat-mxc/include/mach/mx27.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx2x.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx3x.h | 4 ----
 5 files changed, 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 786836965cf..ee60d64728c 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,10 +12,6 @@
 #ifndef __ASM_ARCH_MXC_MX1_H__
 #define __ASM_ARCH_MXC_MX1_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 #include <mach/vmalloc.h>
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8b070a041a9..21112c695ec 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-
 /* Memory regions and CS */
 #define SDRAM_BASE_ADDR         0xC0000000
 #define CSD1_BASE_ADDR          0xC4000000
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 063ac352465..dc3ad9aa952 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* IRAM */
 #define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
 
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index fc40d3ab8c5..5982ae5a00d 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -23,10 +23,6 @@
 #ifndef __ASM_ARCH_MXC_MX2x_H__
 #define __ASM_ARCH_MXC_MX2x_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* The following addresses are common between i.MX21 and i.MX27 */
 
 /* Register offests */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 44ca1b700f0..16f68e8f4cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -11,10 +11,6 @@
 #ifndef __ASM_ARCH_MXC_MX31_H__
 #define __ASM_ARCH_MXC_MX31_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /*
  * MX31 memory map:
  *
-- 
cgit v1.2.3


From c5aa0ad0c557c63dcaf8c8d75a3dd4c5e90724b3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:36:19 +0200
Subject: mxc: turn to soc specific init_irq functions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  6 ++++++
 arch/arm/mach-mx1/mx1ads.c              |  4 ++--
 arch/arm/mach-mx1/scb9328.c             |  2 +-
 arch/arm/mach-mx2/generic.c             | 10 ++++++++++
 arch/arm/mach-mx2/mx21ads.c             |  2 +-
 arch/arm/mach-mx2/mx27ads.c             |  2 +-
 arch/arm/mach-mx2/mx27lite.c            |  2 +-
 arch/arm/mach-mx2/mx27pdk.c             |  2 +-
 arch/arm/mach-mx2/pcm038.c              |  2 +-
 arch/arm/mach-mx3/armadillo5x0.c        |  2 +-
 arch/arm/mach-mx3/mm.c                  | 10 ++++++++++
 arch/arm/mach-mx3/mx31ads.c             |  2 +-
 arch/arm/mach-mx3/mx31lilly.c           |  2 +-
 arch/arm/mach-mx3/mx31lite.c            |  2 +-
 arch/arm/mach-mx3/mx31moboard.c         |  3 ++-
 arch/arm/mach-mx3/mx31pdk.c             |  2 +-
 arch/arm/mach-mx3/mx35pdk.c             |  2 +-
 arch/arm/mach-mx3/pcm037.c              |  2 +-
 arch/arm/mach-mx3/pcm043.c              |  2 +-
 arch/arm/mach-mx3/qong.c                |  2 +-
 arch/arm/plat-mxc/include/mach/common.h |  7 ++++++-
 arch/arm/plat-mxc/irq.c                 |  4 ++--
 22 files changed, 53 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index bbb6c7b8766..7f9fc1034c0 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -45,3 +45,9 @@ void __init mx1_map_io(void)
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
+
+void __init mx1_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e5b0c0a83c3..6af064d19b0 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -151,7 +151,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
@@ -161,7 +161,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 20e0b5bcdff..125d495e9c7 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -154,7 +154,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bdc5a6e67be..ae8f759134d 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -85,3 +85,13 @@ void __init mx27_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx27_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+	mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461cb40..a525783ceea 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -280,7 +280,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
 	.timer          = &mx21ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02daddac699..a9f69eb58b7 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -330,7 +330,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb8c04..82ea227ea0c 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
 	.timer          = &mx27lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c7a6c..6761d1b79e4 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
 	.timer          = &mx27pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d00434..638d078304c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -241,7 +241,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index ee331fd6b1b..776c0ee1b3c 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -352,7 +352,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,
 	.init_machine	= armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index f0d5ae533b4..c327172159c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -88,6 +88,16 @@ void __init mx35_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+	mx31_init_irq();
+}
+
 #ifdef CONFIG_CACHE_L2X0
 static int mxc_init_l2x0(void)
 {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 30e2767a78a..0497c152be1 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -517,7 +517,7 @@ static void __init mx31ads_map_io(void)
 
 static void __init mx31ads_init_irq(void)
 {
-	mxc_init_irq();
+	mx31_init_irq();
 	mx31ads_init_expio();
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 6ab2f163cb9..423025150f6 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -148,7 +148,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.init_machine	= mx31lilly_board_init,
 	.timer		= &mx31lilly_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 86fe70fa3e1..b1c0afc40cf 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -162,7 +162,7 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e41160..b86b8a757c9 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -36,6 +36,7 @@
 #include <mach/iomux-mx3.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
+#include <mach/mx31.h>
 
 #include "devices.h"
 
@@ -197,7 +198,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index c19838d2e36..0f7a2f06bc2 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -265,7 +265,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6d15374414b..6ff186e46ce 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -98,7 +98,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx35pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 840cfda341d..d8472206de9 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -592,7 +592,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 8d27c324abf..7c7d3cc07b8 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -245,7 +245,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm043_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 82b31c4ab11..0bca4d914ab 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -280,7 +280,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
 MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1dc31d6dd43..cd8f215c1ad 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -19,7 +19,12 @@ extern void mx21_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mxc_init_irq(void);
+extern void mxc_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 8aee76304f8..618a8b24ed1 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -113,11 +113,11 @@ static struct irq_chip mxc_avic_chip = {
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void)
+void __init mxc_init_irq(void __iomem *irqbase)
 {
 	int i;
 
-	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+	avic_base = irqbase;
 
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
-- 
cgit v1.2.3


From 997d74b18ae1d0d8f4c4469a5d1ce8d73ca8402c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 10:32:08 +0200
Subject: MXC iomux-v3: Fix defines for PAD_CTL registers

The old defines leaked in from an old version of the patch.
Change the defines to match the register layout of the iomuxer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-v3.h | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 7cd84547658..cd06df9370c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -68,28 +68,24 @@ struct pad_desc {
 /*
  * Use to set PAD control
  */
-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
 
-#define PAD_CTL_NO_HYSTERESIS		0
-#define PAD_CTL_HYSTERESIS		1
+#define PAD_CTL_DVS			(1 << 13)
+#define PAD_CTL_HYS			(1 << 8)
 
-#define PAD_CTL_PULL_DISABLED		0x0
-#define PAD_CTL_PULL_KEEPER		0xa
-#define PAD_CTL_PULL_DOWN_100K		0xc
-#define PAD_CTL_PULL_UP_47K		0xd
-#define PAD_CTL_PULL_UP_100K		0xe
-#define PAD_CTL_PULL_UP_22K		0xf
+#define PAD_CTL_PKE			(1 << 7)
+#define PAD_CTL_PUE			(1 << 6)
+#define PAD_CTL_PUS_100K_DOWN		(0 << 4)
+#define PAD_CTL_PUS_47K_UP		(1 << 4)
+#define PAD_CTL_PUS_100K_UP		(2 << 4)
+#define PAD_CTL_PUS_22K_UP		(3 << 4)
 
-#define PAD_CTL_OUTPUT_CMOS		0
-#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+#define PAD_CTL_ODE			(1 << 3)
 
-#define PAD_CTL_DRIVE_STRENGTH_NORM	0
-#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
-#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+#define PAD_CTL_DSE_STANDARD		(0 << 1)
+#define PAD_CTL_DSE_HIGH		(1 << 1)
+#define PAD_CTL_DSE_MAX			(2 << 1)
 
-#define PAD_CTL_SLEW_RATE_SLOW		0
-#define PAD_CTL_SLEW_RATE_FAST		1
+#define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
  * setups a single pad:
-- 
cgit v1.2.3


From aa68c02777702f05ea5f075e3001288c30ffcb1c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 11:52:26 +0200
Subject: mx2: remove mxc_irda platform device

Irda support is handled by the normal ims serial driver, so
we do not need this device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 24 ------------------------
 arch/arm/mach-mx2/devices.h |  1 -
 2 files changed, 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b367432..e6f0f4f1558 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,30 +39,6 @@
 
 #include "devices.h"
 
-/*
- * Resource definition for the MXC IrDA
- */
-static struct resource mxc_irda_resources[] = {
-	[0] = {
-		.start   = UART3_BASE_ADDR,
-		.end     = UART3_BASE_ADDR + SZ_4K - 1,
-		.flags   = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start   = MXC_INT_UART3,
-		.end     = MXC_INT_UART3,
-		.flags   = IORESOURCE_IRQ,
-	},
-};
-
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
-	.name = "mxc_irda",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_irda_resources),
-	.resource = mxc_irda_resources,
-};
-
 /*
  * General Purpose Timer
  * - i.MX1: 2 timer (slighly different register handling)
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005bb6aa..c79ba7fed1b 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
-- 
cgit v1.2.3


From bf50bcc242db7f8d2fb6bc099c1693149d9fb5d5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:04:36 +0200
Subject: mx2: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 165 ++++++++++++++++++++------------------------
 1 file changed, 73 insertions(+), 92 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index e6f0f4f1558..cbf42467466 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -41,20 +41,18 @@
 
 /*
  * General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
  */
 
 /* We use gpt0 as system timer, so do not add a device for this one */
 
 static struct resource timer1_resources[] = {
-	[0] = {
+	{
 		.start	= GPT2_BASE_ADDR,
 		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT2,
 		.end     = MXC_INT_GPT2,
 		.flags   = IORESOURCE_IRQ,
@@ -65,16 +63,15 @@ struct platform_device mxc_gpt1 = {
 	.name = "imx_gpt",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources
+	.resource = timer1_resources,
 };
 
 static struct resource timer2_resources[] = {
-	[0] = {
+	{
 		.start	= GPT3_BASE_ADDR,
 		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT3,
 		.end     = MXC_INT_GPT3,
 		.flags   = IORESOURCE_IRQ,
@@ -85,17 +82,16 @@ struct platform_device mxc_gpt2 = {
 	.name = "imx_gpt",
 	.id = 2,
 	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources
+	.resource = timer2_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource timer3_resources[] = {
-	[0] = {
+	{
 		.start	= GPT4_BASE_ADDR,
 		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT4,
 		.end     = MXC_INT_GPT4,
 		.flags   = IORESOURCE_IRQ,
@@ -106,16 +102,15 @@ struct platform_device mxc_gpt3 = {
 	.name = "imx_gpt",
 	.id = 3,
 	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources
+	.resource = timer3_resources,
 };
 
 static struct resource timer4_resources[] = {
-	[0] = {
+	{
 		.start	= GPT5_BASE_ADDR,
 		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT5,
 		.end     = MXC_INT_GPT5,
 		.flags   = IORESOURCE_IRQ,
@@ -126,16 +121,15 @@ struct platform_device mxc_gpt4 = {
 	.name = "imx_gpt",
 	.id = 4,
 	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources
+	.resource = timer4_resources,
 };
 
 static struct resource timer5_resources[] = {
-	[0] = {
+	{
 		.start	= GPT6_BASE_ADDR,
 		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT6,
 		.end     = MXC_INT_GPT6,
 		.flags   = IORESOURCE_IRQ,
@@ -146,7 +140,7 @@ struct platform_device mxc_gpt5 = {
 	.name = "imx_gpt",
 	.id = 5,
 	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources
+	.resource = timer5_resources,
 };
 #endif
 
@@ -190,11 +184,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= NFC_BASE_ADDR,
 		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -216,8 +210,7 @@ static struct resource mxc_fb[] = {
 		.start = LCDC_BASE_ADDR,
 		.end   = LCDC_BASE_ADDR + 0xFFF,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_LCDC,
 		.end   = MXC_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
@@ -240,11 +233,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= FEC_BASE_ADDR,
 		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -257,15 +250,14 @@ struct platform_device mxc_fec_device = {
 #endif
 
 static struct resource mxc_i2c_1_resources[] = {
-	[0] = {
+	{
 		.start	= I2C_BASE_ADDR,
 		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C,
 		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -273,20 +265,19 @@ struct platform_device mxc_i2c_device0 = {
 	.name = "imx-i2c",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources
+	.resource = mxc_i2c_1_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_i2c_2_resources[] = {
-	[0] = {
+	{
 		.start	= I2C2_BASE_ADDR,
 		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C2,
 		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -294,17 +285,16 @@ struct platform_device mxc_i2c_device1 = {
 	.name = "imx-i2c",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources
+	.resource = mxc_i2c_2_resources,
 };
 #endif
 
 static struct resource mxc_pwm_resources[] = {
-	[0] = {
+	{
 		.start	= PWM_BASE_ADDR,
 		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_PWM,
 		.end     = MXC_INT_PWM,
 		.flags   = IORESOURCE_IRQ,
@@ -315,28 +305,26 @@ struct platform_device mxc_pwm_device = {
 	.name = "mxc_pwm",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources
+	.resource = mxc_pwm_resources,
 };
 
 /*
  * Resource definition for the MXC SDHC
  */
 static struct resource mxc_sdhc1_resources[] = {
-	[0] = {
-			.start = SDHC1_BASE_ADDR,
-			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC1,
-			.end   = MXC_INT_SDHC1,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC1,
-			.end    = DMA_REQ_SDHC1,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC1_BASE_ADDR,
+		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC1,
+		.end   = MXC_INT_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC1,
+		.end    = DMA_REQ_SDHC1,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -353,21 +341,19 @@ struct platform_device mxc_sdhc_device0 = {
 };
 
 static struct resource mxc_sdhc2_resources[] = {
-	[0] = {
-			.start = SDHC2_BASE_ADDR,
-			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC2,
-			.end   = MXC_INT_SDHC2,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC2,
-			.end    = DMA_REQ_SDHC2,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC2_BASE_ADDR,
+		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC2,
+		.end   = MXC_INT_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC2,
+		.end    = DMA_REQ_SDHC2,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -385,33 +371,28 @@ struct platform_device mxc_sdhc_device1 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
 		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
+	}, {
 		.chip.label = "gpio-3",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-	[4] = {
+	}, {
 		.chip.label = "gpio-4",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	},
-	[5] = {
+	}, {
 		.chip.label = "gpio-5",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
-- 
cgit v1.2.3


From 3f4f54b4f0052e9838f6bb98535746464d0c01c3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:12:00 +0200
Subject: mx3: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c  | 25 ++++++++++---------------
 arch/arm/mach-mx3/mx31lite.c |  5 ++---
 arch/arm/mach-mx3/pcm037.c   |  5 ++---
 arch/arm/mach-mx3/qong.c     |  5 ++---
 4 files changed, 16 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 9e87e08fb12..7a5c2ef52a4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -129,19 +129,17 @@ struct platform_device mxc_uart_device4 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
 		.irq = MXC_INT_GPIO1,
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
 		.irq = MXC_INT_GPIO2,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
 		.irq = MXC_INT_GPIO3,
@@ -173,11 +171,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= 0, /* runtime dependent */
 		.end	= 0,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -193,8 +191,7 @@ static struct resource mxc_i2c0_resources[] = {
 		.start = I2C_BASE_ADDR,
 		.end = I2C_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C,
 		.end = MXC_INT_I2C,
 		.flags = IORESOURCE_IRQ,
@@ -213,8 +210,7 @@ static struct resource mxc_i2c1_resources[] = {
 		.start = I2C2_BASE_ADDR,
 		.end = I2C2_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C2,
 		.end = MXC_INT_I2C2,
 		.flags = IORESOURCE_IRQ,
@@ -233,8 +229,7 @@ static struct resource mxc_i2c2_resources[] = {
 		.start = I2C3_BASE_ADDR,
 		.end = I2C3_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C3,
 		.end = MXC_INT_I2C3,
 		.flags = IORESOURCE_IRQ,
@@ -400,11 +395,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= MXC_FEC_BASE_ADDR,
 		.end	= MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index b1c0afc40cf..a8d57decdfd 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -71,12 +71,11 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS4_BASE_ADDR,
 		.end		= CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.flags		= IORESOURCE_IRQ,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index d8472206de9..c755c06b75d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -244,12 +244,11 @@ static struct imxuart_platform_data uart_pdata = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS1_BASE_ADDR + 0x300,
 		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 0bca4d914ab..044511f1b9a 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -81,13 +81,12 @@ static inline void mxc_init_imx_uart(void)
 }
 
 static struct resource dnet_resources[] = {
-	[0] = {
+	{
 		.name	= "dnet-memory",
 		.start	= QONG_DNET_BASEADDR,
 		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= QONG_FPGA_IRQ,
 		.end	= QONG_FPGA_IRQ,
 		.flags	= IORESOURCE_IRQ,
-- 
cgit v1.2.3


From 9b0e6db0da1ea433f38b8d952108746f3fc67304 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:14:39 +0200
Subject: mx1: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/devices.c | 87 +++++++++++++++++----------------------------
 arch/arm/mach-mx1/scb9328.c | 14 ++++----
 2 files changed, 39 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 76d1ffb4807..b6be29d1cb0 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -29,12 +29,11 @@
 #include "devices.h"
 
 static struct resource imx_csi_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00224000,
 		.end    = 0x00224010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = CSI_INT,
 		.end    = CSI_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@ struct platform_device imx_csi_device = {
 };
 
 static struct resource imx_i2c_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00217000,
 		.end    = 0x00217010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = I2C_INT,
 		.end    = I2C_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = {
 };
 
 static struct resource imx_uart1_resources[] = {
-	[0] = {
+	{
 		.start	= UART1_BASE_ADDR,
 		.end	= UART1_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART1_MINT_RX,
 		.end	= UART1_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART1_MINT_TX,
 		.end	= UART1_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART1_MINT_RTS,
 		.end	= UART1_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = {
 };
 
 static struct resource imx_uart2_resources[] = {
-	[0] = {
+	{
 		.start	= UART2_BASE_ADDR,
 		.end	= UART2_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART2_MINT_RX,
 		.end	= UART2_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART2_MINT_TX,
 		.end	= UART2_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART2_MINT_RTS,
 		.end	= UART2_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = {
 };
 
 static struct resource imx_rtc_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00204000,
 		.end    = 0x00204024,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = RTC_INT,
 		.end    = RTC_INT,
 		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start  = RTC_SAMINT,
 		.end    = RTC_SAMINT,
 		.flags  = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = {
 };
 
 static struct resource imx_wdt_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00201000,
 		.end    = 0x00201008,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = WDT_INT,
 		.end    = WDT_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = {
 };
 
 static struct resource imx_usb_resources[] = {
-	[0] = {
+	{
 		.start	= 0x00212000,
 		.end	= 0x00212148,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= USBD_INT0,
 		.end	= USBD_INT0,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= USBD_INT1,
 		.end	= USBD_INT1,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= USBD_INT2,
 		.end	= USBD_INT2,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
+	}, {
 		.start	= USBD_INT3,
 		.end	= USBD_INT3,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[5] = {
+	}, {
 		.start	= USBD_INT4,
 		.end	= USBD_INT4,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
+	}, {
 		.start	= USBD_INT5,
 		.end	= USBD_INT5,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[7] = {
+	}, {
 		.start	= USBD_INT6,
 		.end	= USBD_INT6,
 		.flags	= IORESOURCE_IRQ,
@@ -231,29 +213,26 @@ struct platform_device imx_usb_device = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
 		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START
-	},
-	[1] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
 		.chip.label = "gpio-1",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32
-	},
-	[2] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
 		.chip.label = "gpio-2",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64
-	},
-	[3] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
 		.chip.label = "gpio-3",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	}
 };
 
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 125d495e9c7..325d98df605 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = {
  * to gain access to address latch registers and the data path.
  */
 static struct resource dm9000x_resources[] = {
-	[0] = {
+	{
 		.name	= "address area",
 		.start	= IMX_CS5_PHYS,
 		.end	= IMX_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM	/* address access */
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,	/* address access */
+	}, {
 		.name	= "data area",
 		.start	= IMX_CS5_PHYS + 4,
 		.end	= IMX_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM	/* data access */
-	},
-	[2] = {
+		.flags	= IORESOURCE_MEM,	/* data access */
+	}, {
 		.start	= IRQ_GPIOC(3),
 		.end	= IRQ_GPIOC(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
-- 
cgit v1.2.3


From f497d0153a6b53b4cfd004de5f10b14bf630d852 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 18 Mar 2009 11:29:31 +0100
Subject: imxfb: calculate bpix value from bits_per_pixel

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/imxfb.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 9f0101157ec..66259f6158e 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -13,7 +13,8 @@
 #define PCR_BPIX_4	(2 << 25)
 #define PCR_BPIX_8	(3 << 25)
 #define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(4 << 25)
+#define PCR_BPIX_16	(5 << 25)
+#define PCR_BPIX_18	(6 << 25)
 #define PCR_PIXPOL	(1 << 24)
 #define PCR_FLMPOL	(1 << 23)
 #define PCR_LPPOL	(1 << 22)
-- 
cgit v1.2.3


From 343684ffb793a3c371579b7bbc16724713ee5ac7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 19 Mar 2009 08:25:41 +0100
Subject: imxfb: Add support for multiple displays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx27ads.c            | 36 +++++++++------
 arch/arm/mach-mx2/pcm970-baseboard.c   | 83 +++++++++++++++++++++++-----------
 arch/arm/plat-mxc/include/mach/imxfb.h | 26 ++++-------
 3 files changed, 88 insertions(+), 57 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9f69eb58b7..83e412b713e 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@ void lcd_power(int on)
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.pixclock	= 188679,
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 9,
-	.right_margin	= 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
 	/*
 	 * - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
 	 * - data enable low active
 	 * - enable sharp mode
 	 */
-	.pcr		= 0xFB008BC0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf57dd..8e2bc94f1a0 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -125,35 +125,64 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
-static struct imx_fb_platform_data pcm038_fb_data = {
-	.pixclock	= 188679, /* in ps (5.3MHz) */
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 5,
-	.right_margin	= 16,
+static struct imx_fb_videomode pcm970_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 7,
+			.left_margin	= 5,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		/*
+		 * - HSYNC active high
+		 * - VSYNC active high
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr		= 0xF00080C0,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "TX090",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 38255,
+			.left_margin	= 144,
+			.right_margin	= 0,
+			.upper_margin	= 7,
+			.lower_margin	= 40,
+			.hsync_len	= 96,
+			.vsync_len	= 1,
+		},
+		/*
+		 * - HSYNC active low (1 << 22)
+		 * - VSYNC active low (1 << 23)
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+		.bpp = 32,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.mode = pcm970_modes,
+	.num_modes = ARRAY_SIZE(pcm970_modes),
 
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock not inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pcr		= 0xFA0080C0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 66259f6158e..5263506b7dd 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2,6 +2,8 @@
  * This structure describes the machine which we are running on.
  */
 
+#include <linux/fb.h>
+
 #define PCR_TFT		(1 << 31)
 #define PCR_COLOR	(1 << 30)
 #define PCR_PBSIZ_1	(0 << 28)
@@ -47,29 +49,21 @@
 #define DMACR_HM(x)	(((x) & 0xf) << 16)
 #define DMACR_TM(x)	((x) & 0xf)
 
-struct imx_fb_platform_data {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_int		nonstd;
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
+struct imx_fb_videomode {
+	struct fb_videomode mode;
+	u32 pcr;
+	unsigned char	bpp;
+};
 
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
+struct imx_fb_platform_data {
+	struct imx_fb_videomode *mode;
+	int		num_modes;
 
 	u_int		cmap_greyscale:1,
 			cmap_inverse:1,
 			cmap_static:1,
 			unused:29;
 
-	u_int		pcr;
 	u_int		pwmr;
 	u_int		lscr1;
 	u_int		dmacr;
-- 
cgit v1.2.3


From 91bf9a2566a6f507f45ad2fb59802e528f5a9c3f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:28 +0200
Subject: pcm037: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c755c06b75d..1b9140e2303 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -32,6 +32,7 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <media/soc_camera.h>
 
@@ -514,6 +515,33 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS5_BASE_ADDR,
+		.end     = CS5_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * Board specific initialization.
  */
@@ -574,6 +602,8 @@ static void __init mxc_board_init(void)
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);
+
+	platform_device_register(&pcm970_sja1000);
 }
 
 static void __init pcm037_timer_init(void)
-- 
cgit v1.2.3


From 61b032ef263c17bb733cfb3f87a811be52adbe22 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:42 +0200
Subject: pcm038: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm970-baseboard.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 8e2bc94f1a0..c261f59b0b4 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <asm/mach/arch.h>
 
@@ -188,6 +189,33 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.dmacr		= 0x00020010,
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS4_BASE_ADDR,
+		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IRQ_GPIOE(19),
+		.end     = IRQ_GPIOE(19),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -201,4 +229,5 @@ void __init pcm970_baseboard_init(void)
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	platform_device_register(&pcm970_sja1000);
 }
-- 
cgit v1.2.3


From 8afaada2dc9247ffcd2982be824cd290ace18f55 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 15 Jun 2009 12:36:25 +0200
Subject: mxc gpio: CONFIG_ARCH_* -> cpu_is_*()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7506d963be4..b7071572035 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -162,7 +162,6 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 	}
 }
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
 /* MX1 and MX3 has one interrupt *per* gpio port */
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -174,9 +173,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	mxc_gpio_irq_handler(port, irq_stat);
 }
-#endif
 
-#ifdef CONFIG_ARCH_MX2
 /* MX2 has one interrupt *for all* gpio ports */
 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -195,7 +192,6 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 			mxc_gpio_irq_handler(&port[i], irq_stat);
 	}
 }
-#endif
 
 static struct irq_chip gpio_irq_chip = {
 	.ack = gpio_ack_irq,
@@ -284,17 +280,18 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
-		/* setup one handler for each entry */
-		set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
-		set_irq_data(port[i].irq, &port[i]);
-#endif
+		if (cpu_is_mx1() || cpu_is_mx3()) {
+			/* setup one handler for each entry */
+			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+			set_irq_data(port[i].irq, &port[i]);
+		}
+	}
+
+	if (cpu_is_mx2()) {
+		/* setup one handler for all GPIO interrupts */
+		set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+		set_irq_data(port[0].irq, port);
 	}
 
-#ifdef CONFIG_ARCH_MX2
-	/* setup one handler for all GPIO interrupts */
-	set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-	set_irq_data(port[0].irq, port);
-#endif
 	return 0;
 }
-- 
cgit v1.2.3


From 494f22dddc6308b9c35984118ff4cb1681ad8e48 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:26:51 +0200
Subject: MXC gpio interrupt support: move register definitions to .c file

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c              | 17 +++++++++++++++++
 arch/arm/plat-mxc/include/mach/mx1.h  | 14 --------------
 arch/arm/plat-mxc/include/mach/mx2x.h | 14 --------------
 arch/arm/plat-mxc/include/mach/mx3x.h | 14 --------------
 4 files changed, 17 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index b7071572035..f0315edb3eb 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -29,6 +29,23 @@
 static struct mxc_gpio_port *mxc_gpio_ports;
 static int gpio_table_size;
 
+#define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR		(cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR	(cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR	(cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1	(cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE	(cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE	(cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE		0x4
+
 /* Note: This driver assumes 32 GPIOs are handled in one register */
 
 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index ee60d64728c..1b2890a5c45 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -134,20 +134,6 @@
 #define GPIO_INT_PORTD		62
 #define WDT_INT			63
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* DMA */
 #define DMA_REQ_UART3_T		2
 #define DMA_REQ_UART3_R		3
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index 5982ae5a00d..db5d921e0fe 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -150,20 +150,6 @@
 #define MXC_INT_GPIO		8
 #define MXC_INT_CSPI3		6
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* fixed DMA request numbers */
 #define DMA_REQ_CSI_RX          31
 #define DMA_REQ_CSI_STAT        30
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 16f68e8f4cf..009f4440276 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -259,20 +259,6 @@
 #define SYSTEM_REV_MIN		CHIP_REV_1_0
 #define SYSTEM_REV_NUM		3
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-- 
cgit v1.2.3


From 5ef881bbecc72862fa379cb286a50f2781db4cec Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:35:08 +0200
Subject: MXC: pwm driver fixes

- fix off-by-one error in divider calculation
- disable pwm in pwm_disable

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index ae34198a79d..42dd17b89ff 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -72,7 +72,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+		writel(MX3_PWMCR_PRESCALER(prescale) |
 			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
 			pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
@@ -118,6 +118,8 @@ EXPORT_SYMBOL(pwm_enable);
 
 void pwm_disable(struct pwm_device *pwm)
 {
+	writel(0, pwm->mmio_base + MX3_PWMCR);
+
 	if (pwm->clk_enabled) {
 		clk_disable(pwm->clk);
 		pwm->clk_enabled = 0;
-- 
cgit v1.2.3


From 6d73665f052a8dadf6f33dfd2546e15199ad7c5f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 3 Jun 2009 11:22:32 +0200
Subject: MXC PLL decoding: calculate mfn value with less magic

Also, use cpu_is_* macros rather than CONFIG_ARCH_*

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 92e13566cd4..f653213b741 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,6 +39,7 @@
 #include <linux/string.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -363,12 +364,11 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 
 	mfn_abs = mfn;
 
-#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
-	if (mfn >= 0x200) {
-		mfn |= 0xFFFFFE00;
-		mfn_abs = -mfn;
-	}
-#endif
+	/* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+	 * 2's complements number
+	 */
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		mfn_abs = 0x400 - mfn;
 
 	freq *= 2;
 	freq /= pd + 1;
@@ -376,8 +376,10 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 	ll = (unsigned long long)freq * mfn_abs;
 
 	do_div(ll, mfd + 1);
-	if (mfn < 0)
+
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
 		ll = -ll;
+
 	ll = (freq * mfi) + ll;
 
 	return ll;
-- 
cgit v1.2.3


From 7dae1134cd4117c1a579f8ae58ce13c1c1ff7164 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:34:01 +0100
Subject: [ARM] MXC: Switch MX1 to clkdev support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c | 84 ++++++++++++++++-------------------------------
 arch/arm/plat-mxc/Kconfig |  1 +
 2 files changed, 29 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 7b739dd8700..d1b588519ad 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -18,11 +18,14 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/list.h>
 #include <linux/math64.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk)
 }
 
 static struct clk clk16m = {
-	.name = "CLK16M",
 	.get_rate = clk16m_get_rate,
 	.enable = _clk_enable,
 	.enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk)
 }
 
 static struct clk clk32 = {
-	.name = "CLK32",
 	.get_rate = clk32_get_rate,
 };
 
@@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk)
 }
 
 static struct clk clk32_premult = {
-	.name = "CLK32_premultiplier",
 	.parent = &clk32,
 	.get_rate = clk32_premult_get_rate,
 };
@@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk prem_clk = {
-	.name = "prem_clk",
 	.set_parent = prem_clk_set_parent,
 };
 
@@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk)
 }
 
 static struct clk system_clk = {
-	.name = "system_clk",
 	.parent = &prem_clk,
 	.get_rate = system_clk_get_rate,
 };
@@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk)
 }
 
 static struct clk mcu_clk = {
-	.name = "mcu_clk",
 	.parent = &clk32_premult,
 	.get_rate = mcu_clk_get_rate,
 };
@@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk)
 }
 
 static struct clk fclk = {
-	.name = "fclk",
 	.parent = &mcu_clk,
 	.get_rate = fclk_get_rate,
 };
@@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk hclk = {
-	.name = "hclk",
 	.parent = &system_clk,
 	.get_rate = hclk_get_rate,
 	.round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk clk48m = {
-	.name = "CLK48M",
 	.parent = &system_clk,
 	.get_rate = clk48m_get_rate,
 	.round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate)
 
 static struct clk perclk[] = {
 	{
-		.name = "perclk",
 		.id = 0,
 		.parent = &system_clk,
 		.get_rate = perclk1_get_rate,
 		.round_rate = perclk1_round_rate,
 		.set_rate = perclk1_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 1,
 		.parent = &system_clk,
 		.get_rate = perclk2_get_rate,
 		.round_rate = perclk2_round_rate,
 		.set_rate = perclk2_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 2,
 		.parent = &system_clk,
 		.get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk clko_clk = {
-	.name = "clko_clk",
 	.set_parent = clko_set_parent,
 };
 
 static struct clk dma_clk = {
-	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@ static struct clk dma_clk = {
 };
 
 static struct clk csi_clk = {
-	.name = "csi_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@ static struct clk csi_clk = {
 };
 
 static struct clk mma_clk = {
-	.name = "mma_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@ static struct clk mma_clk = {
 };
 
 static struct clk usbd_clk = {
-	.name = "usbd_clk",
 	.parent = &clk48m,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@ static struct clk usbd_clk = {
 };
 
 static struct clk gpt_clk = {
-	.name = "gpt_clk",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk uart_clk = {
-	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk i2c_clk = {
-	.name = "i2c_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk spi_clk = {
-	.name = "spi_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk sdhc_clk = {
-	.name = "sdhc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk lcdc_clk = {
-	.name = "lcdc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk mshc_clk = {
-	.name = "mshc_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk ssi_clk = {
-	.name = "ssi_clk",
 	.parent = &perclk[2],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk rtc_clk = {
-	.name = "rtc_clk",
 	.parent = &clk32,
 };
 
-static struct clk *mxc_clks[] = {
-	&clk16m,
-	&clk32,
-	&clk32_premult,
-	&prem_clk,
-	&system_clk,
-	&mcu_clk,
-	&fclk,
-	&hclk,
-	&clk48m,
-	&perclk[0],
-	&perclk[1],
-	&perclk[2],
-	&clko_clk,
-	&dma_clk,
-	&csi_clk,
-	&mma_clk,
-	&usbd_clk,
-	&gpt_clk,
-	&uart_clk,
-	&i2c_clk,
-	&spi_clk,
-	&sdhc_clk,
-	&lcdc_clk,
-	&mshc_clk,
-	&ssi_clk,
-	&rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "mma", mma_clk)
+	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
 };
 
 int __init mx1_clocks_init(unsigned long fref)
 {
-	struct clk **clkp;
 	unsigned int reg;
+	int i;
 
 	/* disable clocks we are able to */
 	__raw_writel(0, SCM_GCCR);
@@ -620,8 +592,8 @@ int __init mx1_clocks_init(unsigned long fref)
 	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
 	clko_clk.parent = (struct clk *)clko_clocks[reg];
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	clk_enable(&hclk);
 	clk_enable(&fclk);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8986b741223..0617c19f85c 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,6 +9,7 @@ choice
 config ARCH_MX1
 	bool "MX1-based"
 	select CPU_ARM920T
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
-- 
cgit v1.2.3


From 5e63ff9a973a19b78bb0eef22df8946b36e09f0f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:37:29 +0100
Subject: [ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEV

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 154 ----------------------------------------------
 1 file changed, 154 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index f653213b741..9e8fbd57495 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -48,76 +48,6 @@ static DEFINE_MUTEX(clocks_mutex);
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/*
- * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
- * MXC architectures have switched to using clkdev.
- */
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Retrieve a clock by name.
- *
- * Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
- * we try to use clock name only.
- * The reference count to the clock's module owner ref count is incremented.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-	const char *str;
-
-	if (id == NULL)
-		return clk;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	str = strrchr(id, '.');
-	if (str) {
-		int cnt = str - id;
-		str++;
-		idno = simple_strtol(str, NULL, 10);
-		list_for_each_entry(p, &clocks, node) {
-			if (p->id == idno &&
-			    strlen(p->name) == cnt &&
-			    strncmp(id, p->name, cnt) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				goto found;
-			}
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
 static void __clk_disable(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -194,16 +124,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/* Decrement the clock's module reference count */
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
 /* Round the requested clock rate to the nearest supported
  * rate that is less than or equal to the requested rate.
  * This is dependent on the clock's current parent.
@@ -266,80 +186,6 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Add a new clock to the clock tree.
- */
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-/* Remove a clock from the clock tree */
-void clk_unregister(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_PROC_FS
-static int mxc_clock_read_proc(char *page, char **start, off_t off,
-				int count, int *eof, void *data)
-{
-	struct clk *clkp;
-	char *p = page;
-	int len;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
-				clk_get_rate(clkp), clkp->usecount);
-		if (clkp->parent)
-			p += sprintf(p, ", %s-%d\n", clkp->parent->name,
-				     clkp->parent->id);
-		else
-			p += sprintf(p, "\n");
-	}
-
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
-
-	return len;
-}
-
-static int __init mxc_setup_proc_entry(void)
-{
-	struct proc_dir_entry *res;
-
-	res = create_proc_read_entry("cpu/clocks", 0, NULL,
-				     mxc_clock_read_proc, NULL);
-	if (!res) {
-		printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-late_initcall(mxc_setup_proc_entry);
-#endif /* CONFIG_PROC_FS */
-#endif
-
 /*
  * Get the resulting clock rate from a PLL register value and the input
  * frequency. PLLs with this register layout can at least be found on
-- 
cgit v1.2.3


From c13a482c43a148c2b8060b405fc39a4b214d56d2 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:50 +0200
Subject: MX3: Add USB platform devices and resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 65 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 +++
 2 files changed, 68 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 7a5c2ef52a4..4e728a29196 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -390,6 +390,71 @@ struct platform_device mxc_otg_udc_device = {
 	.num_resources	= ARRAY_SIZE(otg_resources),
 };
 
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ffd494ddd4a..81614319755 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -16,5 +16,8 @@ extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
 
-- 
cgit v1.2.3


From 6558f985a1ff7ab2b413f49ee8766c919495e0ac Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 25 Jun 2009 14:11:51 +0200
Subject: ehci mxc: Fix clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 25b6f55bfb0..2b29491c22b 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -532,6 +532,12 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
 	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-- 
cgit v1.2.3


From 88e29a8d21fb9687ad6972a44571b295acaf0d74 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:52 +0200
Subject: MX3: add additional USB pins to iomux

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 2eb182f7387..a3b206ce78b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -635,6 +635,19 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-- 
cgit v1.2.3


From 627fb3b9d260cb413d0ea2d179e319a20e2bd82b Mon Sep 17 00:00:00 2001
From: javier Martin <javier.martin@vista-silicon.com>
Date: Wed, 15 Jul 2009 15:26:21 +0200
Subject: MX27: Add USB platform devices and resources

This adds clocks and resources for usb in i.mx27 SoC.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx27.c |  9 +++-
 arch/arm/mach-mx2/devices.c     | 92 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h     |  4 ++
 3 files changed, 104 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index a0c577f80d4..4089951acb4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
 	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index cbf42467466..4ecf0977beb 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -369,6 +369,98 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index c79ba7fed1b..6e91b4e3509 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -19,3 +19,7 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
-- 
cgit v1.2.3


From af5b1df7136570dae9ac4c1cd193053c61b0ed8f Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:33 +0200
Subject: Add support for Eukrea's CPUIMX27

CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
 NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
 it includes an ethernet PHY in MII mode, an I2C RTC and a
 ST16554 QuadUART on nCS3.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                          |  14 ++
 arch/arm/mach-mx2/Makefile                         |   2 +-
 arch/arm/mach-mx2/eukrea_cpuimx27.c                | 235 +++++++++++++++++++++
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |  25 +++
 4 files changed, 275 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx2/eukrea_cpuimx27.c
 create mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da586b71..2c2be3953d8 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,20 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_EUKREA_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	depends on MACH_MX27
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_EUKREA_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27 used
+	  for wifi or eMMC.
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca4e9b..e12490f670d 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 00000000000..a2c4181892c
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+	/* in which case UART4 is also used for Bluetooth */
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
new file mode 100644
index 00000000000..91bcce65469
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
cgit v1.2.3


From a961bf380b93741c2191f8efc8f5f1c65224b216 Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:34 +0200
Subject: Add support for Eukrea's MBIMX27

MBIMX27 is the evaluation board for CPUIMX27 and integrates : a
QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to
SDHC1.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                          |  14 ++
 arch/arm/mach-mx2/Makefile                         |   1 +
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c       | 249 +++++++++++++++++++++
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |  15 ++
 4 files changed, 279 insertions(+)
 create mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 2c2be3953d8..0c28a37bc14 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -67,6 +67,20 @@ config MACH_EUKREA_CPUIMX27_USESDHC2
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index e12490f670d..8b6846c4226 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 00000000000..7382b6d27ee
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+	{
+		.name			= "backlight",
+		.default_trigger	= "backlight",
+		.active_low		= 0,
+		.gpio			= GPIO_PORTE | 5,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QGVA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* SPI and ADS7846 Touchscreen controler init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+	ads7846_dev_init();
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
index 91bcce65469..a1fd5830af4 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -22,4 +22,19 @@
 #ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 #define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx27_init().
+ *
+ * This example here is for the development board. Refer
+ * eukrea_mbimx27-baseboard.c
+ */
+
+extern void eukrea_mbimx27_baseboard_init(void);
+
+#endif
+
 #endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
cgit v1.2.3


From e8e2ff462dd92693f29eb848f42d3eb720390d59 Mon Sep 17 00:00:00 2001
From: "Gupta, Ajay Kumar" <ajay.gupta@ti.com>
Date: Wed, 29 Jul 2009 11:58:57 +0530
Subject: USB: musb: fix the nop registration for OMAP3EVM

OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.

Cleanups being done:
	- Remove unwanted code in usb-musb.c file
	- Register NOP in OMAP3EVM board file using
	  usb_nop_xceiv_register().
	- Select NOP_USB_XCEIV for OMAP3EVM boards.
	- Don't enable TWL4030_USB in omap3_evm_defconfig

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/arm/configs/omap3_evm_defconfig |  2 +-
 arch/arm/mach-omap2/board-omap3evm.c |  5 +++++
 arch/arm/mach-omap2/usb-musb.c       | 21 ---------------------
 3 files changed, 6 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 28be17fbc15..d5ff4776cd0 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d3cc145814d..cf3dd771a67 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -307,6 +308,10 @@ static void __init omap3_evm_init(void)
 				ARRAY_SIZE(omap3evm_spi_board_info));
 
 	omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+	usb_nop_xceiv_register();
+#endif
 	usb_musb_init();
 	ads7846_dev_init();
 }
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index d85296dc896..739e59e8025 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -155,20 +155,6 @@ static struct platform_device musb_device = {
 	.resource	= musb_resources,
 };
 
-#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device nop_xceiv_device = {
-	.name		= "nop_usb_xceiv",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &nop_xceiv_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= NULL,
-	},
-};
-#endif
-
 void __init usb_musb_init(void)
 {
 	if (cpu_is_omap243x())
@@ -183,13 +169,6 @@ void __init usb_musb_init(void)
 	 */
 	musb_plat.clock = "ick";
 
-#ifdef CONFIG_NOP_USB_XCEIV
-	if (platform_device_register(&nop_xceiv_device) < 0) {
-		printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
-		return;
-	}
-#endif
-
 	if (platform_device_register(&musb_device) < 0) {
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
-- 
cgit v1.2.3


From 087d7e56deffb611a098e7e257388a41edbeef1f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Tue, 4 Aug 2009 08:59:59 -0700
Subject: x86: Fix MSI-X initialization by using online_mask for x2apic
 target_cpus

found a system where x2apic reports an MSI-X irq initialization
failure:

[  302.859446] igbvf 0000:81:10.4: enabling device (0000 -> 0002)
[  302.874369] igbvf 0000:81:10.4: using 64bit DMA mask
[  302.879023] igbvf 0000:81:10.4: using 64bit consistent DMA mask
[  302.894386] igbvf 0000:81:10.4: enabling bus mastering
[  302.898171] igbvf 0000:81:10.4: setting latency timer to 64
[  302.914050] reserve_memtype added 0xefb08000-0xefb0c000, track uncached-minus, req uncached-minus, ret uncached-minus
[  302.933839] reserve_memtype added 0xefb28000-0xefb29000, track uncached-minus, req uncached-minus, ret uncached-minus
[  302.940367]   alloc irq_desc for 265 on node 4
[  302.956874]   alloc kstat_irqs on node 4
[  302.959452] alloc irq_2_iommu on node 0
[  302.974328] igbvf 0000:81:10.4: irq 265 for MSI/MSI-X
[  302.977778]   alloc irq_desc for 266 on node 4
[  302.980347]   alloc kstat_irqs on node 4
[  302.995312] free_memtype request 0xefb28000-0xefb29000
[  302.998816] igbvf 0000:81:10.4: Failed to initialize MSI-X interrupts.

... it turns out that when trying to enable MSI-X,
__assign_irq_vector(new, cfg_new, apic->target_cpus()) can not
get vector because for x2apic target-cpus returns cpumask_of(0)

Update that to online_mask like xapic.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4A785AFF.3050902@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_cluster.c | 8 +++++---
 arch/x86/kernel/apic/x2apic_phys.c    | 8 +++++---
 2 files changed, 10 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 2ed4e2bb3b3..a5371ec3677 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -17,11 +17,13 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return x2apic_enabled();
 }
 
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
 static const struct cpumask *x2apic_target_cpus(void)
 {
-	return cpumask_of(0);
+	return cpu_online_mask;
 }
 
 /*
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 0b631c6a2e0..a8989aadc99 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -27,11 +27,13 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 		return 0;
 }
 
-/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
-
+/*
+ * need to use more than cpu 0, because we need more vectors when
+ * MSI-X are used.
+ */
 static const struct cpumask *x2apic_target_cpus(void)
 {
-	return cpumask_of(0);
+	return cpu_online_mask;
 }
 
 static void x2apic_vector_allocation_domain(int cpu, struct cpumask *retmask)
-- 
cgit v1.2.3


From 498cdbfbcf98e0d2c90a26e6a02a82f043876e48 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ozan=20=C3=87a=C4=9Flayan?= <ozan@pardus.org.tr>
Date: Tue, 4 Aug 2009 19:39:31 +0300
Subject: x86: Add quirk to make Apple MacBookPro5,1 use reboot=pci
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

MacBookPro5,1 is not able to reboot unless reboot=pci is set.
This patch forces it through a DMI quirk specific to this
device.

Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr>
LKML-Reference: <1249403971-6543-1-git-send-email-ozan@pardus.org.tr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/reboot.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 834c9da8bf9..9eb89760370 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -405,7 +405,7 @@ EXPORT_SYMBOL(machine_real_restart);
 #endif /* CONFIG_X86_32 */
 
 /*
- * Apple MacBook5,2 (2009 MacBook) needs reboot=p
+ * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
  */
 static int __init set_pci_reboot(const struct dmi_system_id *d)
 {
@@ -426,6 +426,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"),
 		},
 	},
+	{	/* Handle problems with rebooting on Apple MacBookPro5,1 */
+		.callback = set_pci_reboot,
+		.ident = "Apple MacBookPro5,1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,1"),
+		},
+	},
 	{ }
 };
 
-- 
cgit v1.2.3


From f3d1915a8623b9248572d3ee44e19a80b7a3520b Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Thu, 6 Aug 2009 00:09:31 +0400
Subject: x86, ioapic: Panic on irq-pin binding only if needed

Though the most time we are to panic on irq-pin allocation
fails, for PCI interrupts it's not the case and we could
continue operate even if irq-pin allocation failed.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090805200931.GB5319@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a145d3a837..2999f3dd588 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -490,7 +490,8 @@ static void ioapic_mask_entry(int apic, int pin)
  * shared ISA-space IRQs, so we have to support them. We are super
  * fast in the common case, and fast for shared ISA-space IRQs.
  */
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int
+add_pin_to_irq_node_nopanic(struct irq_cfg *cfg, int node, int apic, int pin)
 {
 	struct irq_pin_list **last, *entry;
 
@@ -498,19 +499,27 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin
 	last = &cfg->irq_2_pin;
 	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		if (entry->apic == apic && entry->pin == pin)
-			return;
+			return 0;
 		last = &entry->next;
 	}
 
 	entry = get_one_free_irq_2_pin(node);
 	if (!entry) {
-		printk(KERN_ERR "can not alloc irq_pin_list\n");
-		BUG_ON(1);
+		printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
+				node, apic, pin);
+		return -ENOMEM;
 	}
 	entry->apic = apic;
 	entry->pin = pin;
 
 	*last = entry;
+	return 0;
+}
+
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+{
+	if (add_pin_to_irq_node_nopanic(cfg, node, apic, pin))
+		panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
 }
 
 /*
@@ -3843,7 +3852,11 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
 	 */
 	if (irq >= NR_IRQS_LEGACY) {
 		cfg = desc->chip_data;
-		add_pin_to_irq_node(cfg, node, ioapic, pin);
+		if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) {
+			printk(KERN_INFO "can not add pin %d for irq %d\n",
+				pin, irq);
+			return 0;
+		}
 	}
 
 	setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
-- 
cgit v1.2.3


From 1e5de18278e6862f4198412b5059a03770fa816a Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:12:20 +0900
Subject: x86: Introduce GDT_ENTRY_INIT()

GDT_ENTRY_INIT is static initializer of desc_struct.

We already have similar macro GDT_ENTRY() but it's static
initializer for u64 and it cannot be used for desc_struct.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718151219.GD11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/desc_defs.h      |  6 ++++++
 arch/x86/include/asm/lguest.h         |  5 +++--
 arch/x86/include/asm/stackprotector.h |  2 +-
 arch/x86/kernel/apm_32.c              |  2 +-
 arch/x86/kernel/cpu/common.c          | 40 +++++++++++++++++------------------
 5 files changed, 31 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index a6adefa28b9..9d6684849fd 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -34,6 +34,12 @@ struct desc_struct {
 	};
 } __attribute__((packed));
 
+#define GDT_ENTRY_INIT(flags, base, limit) { { { \
+		.a = ((limit) & 0xffff) | (((base) & 0xffff) << 16), \
+		.b = (((base) & 0xff0000) >> 16) | (((flags) & 0xf0ff) << 8) | \
+			((limit) & 0xf0000) | ((base) & 0xff000000), \
+	} } }
+
 enum {
 	GATE_INTERRUPT = 0xE,
 	GATE_TRAP = 0xF,
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389cd50d..94cd69858b1 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -91,8 +91,9 @@ static inline void lguest_set_ts(void)
 }
 
 /* Full 4G segment descriptors, suitable for CS and DS. */
-#define FULL_EXEC_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9b00} } })
-#define FULL_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9300} } })
+#define FULL_EXEC_SEGMENT \
+	((struct desc_struct)GDT_ENTRY_INIT(0xc09b, 0, 0xfffff))
+#define FULL_SEGMENT ((struct desc_struct)GDT_ENTRY_INIT(0xc093, 0, 0xfffff))
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index cdc5e0b126a..44efdff3975 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -48,7 +48,7 @@
  * head_32 for boot CPU and setup_per_cpu_areas() for others.
  */
 #define GDT_STACK_CANARY_INIT						\
-	[GDT_ENTRY_STACK_CANARY] = { { { 0x00000018, 0x00409000 } } },
+	[GDT_ENTRY_STACK_CANARY] = GDT_ENTRY_INIT(0x4090, 0, 0x18),
 
 /*
  * Initialize the stackprotector canary value.
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index b5e841bd60d..febb2dab254 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -403,7 +403,7 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
-static struct desc_struct bad_bios_desc = { { { 0, 0x00409200 } } };
+static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092, 0, 0);
 
 static const char driver_version[] = "1.16ac";	/* no spaces */
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c07af9..8c9bc287f8f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -71,45 +71,45 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	 * TLS descriptors are currently at a different place compared to i386.
 	 * Hopefully nobody expects them at a fixed place (Wine?)
 	 */
-	[GDT_ENTRY_KERNEL32_CS]		= { { { 0x0000ffff, 0x00cf9b00 } } },
-	[GDT_ENTRY_KERNEL_CS]		= { { { 0x0000ffff, 0x00af9b00 } } },
-	[GDT_ENTRY_KERNEL_DS]		= { { { 0x0000ffff, 0x00cf9300 } } },
-	[GDT_ENTRY_DEFAULT_USER32_CS]	= { { { 0x0000ffff, 0x00cffb00 } } },
-	[GDT_ENTRY_DEFAULT_USER_DS]	= { { { 0x0000ffff, 0x00cff300 } } },
-	[GDT_ENTRY_DEFAULT_USER_CS]	= { { { 0x0000ffff, 0x00affb00 } } },
+	[GDT_ENTRY_KERNEL32_CS]		= GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER32_CS]	= GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
 #else
-	[GDT_ENTRY_KERNEL_CS]		= { { { 0x0000ffff, 0x00cf9a00 } } },
-	[GDT_ENTRY_KERNEL_DS]		= { { { 0x0000ffff, 0x00cf9200 } } },
-	[GDT_ENTRY_DEFAULT_USER_CS]	= { { { 0x0000ffff, 0x00cffa00 } } },
-	[GDT_ENTRY_DEFAULT_USER_DS]	= { { { 0x0000ffff, 0x00cff200 } } },
+	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
 	/*
 	 * Segments used for calling PnP BIOS have byte granularity.
 	 * They code segments and data segments have fixed 64k limits,
 	 * the transfer segment sizes are set at run time.
 	 */
 	/* 32-bit code */
-	[GDT_ENTRY_PNPBIOS_CS32]	= { { { 0x0000ffff, 0x00409a00 } } },
+	[GDT_ENTRY_PNPBIOS_CS32]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
 	/* 16-bit code */
-	[GDT_ENTRY_PNPBIOS_CS16]	= { { { 0x0000ffff, 0x00009a00 } } },
+	[GDT_ENTRY_PNPBIOS_CS16]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
 	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_DS]		= { { { 0x0000ffff, 0x00009200 } } },
+	[GDT_ENTRY_PNPBIOS_DS]		= GDT_ENTRY_INIT(0x0092, 0, 0xffff),
 	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS1]		= { { { 0x00000000, 0x00009200 } } },
+	[GDT_ENTRY_PNPBIOS_TS1]		= GDT_ENTRY_INIT(0x0092, 0, 0),
 	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS2]		= { { { 0x00000000, 0x00009200 } } },
+	[GDT_ENTRY_PNPBIOS_TS2]		= GDT_ENTRY_INIT(0x0092, 0, 0),
 	/*
 	 * The APM segments have byte granularity and their bases
 	 * are set at run time.  All have 64k limits.
 	 */
 	/* 32-bit code */
-	[GDT_ENTRY_APMBIOS_BASE]	= { { { 0x0000ffff, 0x00409a00 } } },
+	[GDT_ENTRY_APMBIOS_BASE]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
 	/* 16-bit code */
-	[GDT_ENTRY_APMBIOS_BASE+1]	= { { { 0x0000ffff, 0x00009a00 } } },
+	[GDT_ENTRY_APMBIOS_BASE+1]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
 	/* data */
-	[GDT_ENTRY_APMBIOS_BASE+2]	= { { { 0x0000ffff, 0x00409200 } } },
+	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
 
-	[GDT_ENTRY_ESPFIX_SS]		= { { { 0x0000ffff, 0x00cf9200 } } },
-	[GDT_ENTRY_PERCPU]		= { { { 0x0000ffff, 0x00cf9200 } } },
+	[GDT_ENTRY_ESPFIX_SS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
+	[GDT_ENTRY_PERCPU]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
 	GDT_STACK_CANARY_INIT
 #endif
 } };
-- 
cgit v1.2.3


From 72c4d8530244264317a662de9a55cc47e6c8e9df Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 3 Aug 2009 08:47:07 +0200
Subject: x86: Introduce GDT_ENTRY_INIT(), fix APM

This crash:

[    0.891983] calling  cache_sysfs_init+0x0/0x1ee @ 1
[    0.897251] initcall cache_sysfs_init+0x0/0x1ee returned 0 after 405 usecs
[    0.904019] calling  mce_init_device+0x0/0x242 @ 1
[    0.909124] initcall mce_init_device+0x0/0x242 returned 0 after 347 usecs
[    0.915815] calling  apm_init+0x0/0x38d @ 1
[    0.919967] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[    0.926813] general protection fault: 0000 [#1]
[    0.927269] last sysfs file:
[    0.927269] Modules linked in:
[    0.927269]
[    0.927269] Pid: 271, comm: kapmd Not tainted (2.6.31-rc3-00100-gd520da1-dirty #311) System Product Name
[    0.927269] EIP: 00c0:[<000082b2>] EFLAGS: 00010002 CPU: 0
[    0.927269] EIP is at 0x82b2
[    0.927269] EAX: 0000530e EBX: 00000000 ECX: 00000102 EDX: 00000000
[    0.927269] ESI: 00000000 EDI: f6a4bf44 EBP: 67890000 ESP: f6a4beec
[    0.927269]  DS: 00c8 ES: 0000 FS: 0000 GS: 0000 SS: 0068
[    0.927269] Process kapmd (pid: 271, ti=f6a4a000 task=f7142280 task.ti=f6a4a000)
[    0.927269] Stack:
[    0.927269]  0000828d 02160000 00b88092 f6a4bf3c c102a63d 00000060 f6a4bf3c f6a4bf44
[    0.927269] <0> 0000007b 0000007b 00000000 00000000 00000000 00000000 560aae9e 00000000
[    0.927269] <0> 00000200 f705fd74 00000000 c102af70 f6a4bf60 c102a6ec 0000530e 00000000
[    0.927269] Call Trace:
[    0.927269]  [<c102a63d>] ? __apm_bios_call_simple+0x7d/0x110
[    0.927269]  [<c102af70>] ? apm+0x0/0x6a0
[    0.927269]  [<c102a6ec>] ? apm_bios_call_simple+0x1c/0x50
[    0.927269]  [<c102b3f5>] ? apm+0x485/0x6a0
[    0.927269]  [<c1038e7a>] ? finish_task_switch+0x2a/0xb0
[    0.927269]  [<c164a69e>] ? schedule+0x31e/0x480
[    0.927269]  [<c102af70>] ? apm+0x0/0x6a0
[    0.927269]  [<c102af70>] ? apm+0x0/0x6a0
[    0.927269]  [<c1052654>] ? kthread+0x74/0x80
[    0.927269]  [<c10525e0>] ? kthread+0x0/0x80
[    0.927269]  [<c101d627>] ? kernel_thread_helper+0x7/0x10
[    0.927269] Code:  Bad EIP value.
[    0.927269] EIP: [<000082b2>] 0x82b2 SS:ESP 0068:f6a4beec
[    0.927269] ---[ end trace a7919e7f17c0a725 ]---
[    0.927269] Kernel panic - not syncing: Fatal exception
[    0.927269] Pid: 271, comm: kapmd Tainted: G      D    2.6.31-rc3-00100-gd520da1-dirty #311

Is caused by an incorrect GDT_ENTRY_INIT() conversion in the apm
code, as noticed by hpa.

Reported-by: Ingo Molnar <mingo@elte.hu>
Noticed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090808094905.GA2954@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 8c9bc287f8f..b5764a26964 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -106,7 +106,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	/* 16-bit code */
 	[GDT_ENTRY_APMBIOS_BASE+1]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
 	/* data */
-	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
+	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(0x4092, 0, 0xffff),
 
 	[GDT_ENTRY_ESPFIX_SS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
 	[GDT_ENTRY_PERCPU]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
-- 
cgit v1.2.3


From 4c711576b90cc36c13b94816a953a8de6a53d03c Mon Sep 17 00:00:00 2001
From: Amerigo Wang <amwang@redhat.com>
Date: Thu, 6 Aug 2009 15:58:12 -0700
Subject: x86, 32-bit: Use generic sys_pipe()

As suggested by Al, it's better to use the generic sys_pipe() for ia32.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/ia32/ia32entry.S |  2 +-
 arch/x86/ia32/sys_ia32.c  | 14 --------------
 2 files changed, 1 insertion(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index e590261ba05..ba331bfd111 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -537,7 +537,7 @@ ia32_sys_call_table:
 	.quad sys_mkdir
 	.quad sys_rmdir		/* 40 */
 	.quad sys_dup
-	.quad sys32_pipe
+	.quad sys_pipe
 	.quad compat_sys_times
 	.quad quiet_ni_syscall			/* old prof syscall holder */
 	.quad sys_brk		/* 45 */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 085a8c35f14..9f552719882 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -189,20 +189,6 @@ asmlinkage long sys32_mprotect(unsigned long start, size_t len,
 	return sys_mprotect(start, len, prot);
 }
 
-asmlinkage long sys32_pipe(int __user *fd)
-{
-	int retval;
-	int fds[2];
-
-	retval = do_pipe_flags(fds, 0);
-	if (retval)
-		goto out;
-	if (copy_to_user(fd, fds, sizeof(fds)))
-		retval = -EFAULT;
-out:
-	return retval;
-}
-
 asmlinkage long sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
 				   struct sigaction32 __user *oact,
 				   unsigned int sigsetsize)
-- 
cgit v1.2.3


From fdb8a42742ac95606668f73481dfb2f760658fdd Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 6 Aug 2009 15:58:13 -0700
Subject: x86: fix buffer overflow in efi_init()

If the vendor name (from c16) can be longer than 100 bytes (or missing a
terminating null), then the null is written past the end of vendor[].

Found with Parfait, http://research.sun.com/projects/parfait/

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Ying <ying.huang@intel.com>
---
 arch/x86/kernel/efi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 19ccf6d0dcc..fe26ba3e345 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -354,7 +354,7 @@ void __init efi_init(void)
 	 */
 	c16 = tmp = early_ioremap(efi.systab->fw_vendor, 2);
 	if (c16) {
-		for (i = 0; i < sizeof(vendor) && *c16; ++i)
+		for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i)
 			vendor[i] = *c16++;
 		vendor[i] = '\0';
 	} else
-- 
cgit v1.2.3


From f36a1a133a947973efb8e6a1fbdcc23e4a011437 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Fri, 7 Aug 2009 16:59:45 +1000
Subject: perf_counter/powerpc: Fix oops on cpus without perf_counter hardware
 support

If we have the powerpc perf_counter backend compiled in, but
the cpu we are running on is one where we don't support the
PMU, we currently oops in hw_perf_group_sched_in if we try to
use any counters, because ppmu is NULL in that case, and we
unconditionally dereference ppmu.

This fixes the problem by adding a check if ppmu is NULL at the
beginning of hw_perf_group_sched_in, and also at the beginning
of the other functions that get called from the perf_counter
core, i.e. hw_perf_disable, hw_perf_enable, and
hw_perf_counter_setup.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/kernel/perf_counter.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 809fdf94b95..70e1f57f7dd 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -518,6 +518,8 @@ void hw_perf_disable(void)
 	struct cpu_hw_counters *cpuhw;
 	unsigned long flags;
 
+	if (!ppmu)
+		return;
 	local_irq_save(flags);
 	cpuhw = &__get_cpu_var(cpu_hw_counters);
 
@@ -572,6 +574,8 @@ void hw_perf_enable(void)
 	int n_lim;
 	int idx;
 
+	if (!ppmu)
+		return;
 	local_irq_save(flags);
 	cpuhw = &__get_cpu_var(cpu_hw_counters);
 	if (!cpuhw->disabled) {
@@ -737,6 +741,8 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader,
 	long i, n, n0;
 	struct perf_counter *sub;
 
+	if (!ppmu)
+		return 0;
 	cpuhw = &__get_cpu_var(cpu_hw_counters);
 	n0 = cpuhw->n_counters;
 	n = collect_events(group_leader, ppmu->n_counter - n0,
@@ -1281,6 +1287,8 @@ void hw_perf_counter_setup(int cpu)
 {
 	struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu);
 
+	if (!ppmu)
+		return;
 	memset(cpuhw, 0, sizeof(*cpuhw));
 	cpuhw->mmcr[0] = MMCR0_FC;
 }
-- 
cgit v1.2.3


From 30dd568c912602b7dbd609a45d053e01b13422bb Mon Sep 17 00:00:00 2001
From: Markus Metzger <markus.t.metzger@intel.com>
Date: Tue, 21 Jul 2009 15:56:48 +0200
Subject: x86, perf_counter, bts: Add BTS support to perfcounters

Implement a performance counter with:

    attr.type           = PERF_TYPE_HARDWARE
    attr.config         = PERF_COUNT_HW_BRANCH_INSTRUCTIONS
    attr.sample_period  = 1

Using branch trace store (BTS) on x86 hardware, if available.

The from and to address for each branch can be sampled using:

    PERF_SAMPLE_IP      for the from address
    PERF_SAMPLE_ADDR    for the to address

[ v2: address review feedback, fix bugs ]

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/perf_counter.h |  10 ++
 arch/x86/kernel/cpu/perf_counter.c  | 325 +++++++++++++++++++++++++++++++++++-
 2 files changed, 329 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index fa64e401589..e7b7c938ae2 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -84,6 +84,16 @@ union cpuid10_edx {
 #define MSR_ARCH_PERFMON_FIXED_CTR2			0x30b
 #define X86_PMC_IDX_FIXED_BUS_CYCLES			(X86_PMC_IDX_FIXED + 2)
 
+/*
+ * We model BTS tracing as another fixed-mode PMC.
+ *
+ * We choose a value in the middle of the fixed counter range, since lower
+ * values are used by actual fixed counters and higher values are used
+ * to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr.
+ */
+#define X86_PMC_IDX_FIXED_BTS				(X86_PMC_IDX_FIXED + 16)
+
+
 #ifdef CONFIG_PERF_COUNTERS
 extern void init_hw_perf_counters(void);
 extern void perf_counters_lapic_init(void);
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index a7aa8f90095..b237c181aa4 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -6,6 +6,7 @@
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
  *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
  *
  *  For licencing details see kernel-base/COPYING
  */
@@ -20,6 +21,7 @@
 #include <linux/sched.h>
 #include <linux/uaccess.h>
 #include <linux/highmem.h>
+#include <linux/cpu.h>
 
 #include <asm/apic.h>
 #include <asm/stacktrace.h>
@@ -27,12 +29,52 @@
 
 static u64 perf_counter_mask __read_mostly;
 
+/* The maximal number of PEBS counters: */
+#define MAX_PEBS_COUNTERS	4
+
+/* The size of a BTS record in bytes: */
+#define BTS_RECORD_SIZE		24
+
+/* The size of a per-cpu BTS buffer in bytes: */
+#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 1024)
+
+/* The BTS overflow threshold in bytes from the end of the buffer: */
+#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 64)
+
+
+/*
+ * Bits in the debugctlmsr controlling branch tracing.
+ */
+#define X86_DEBUGCTL_TR			(1 << 6)
+#define X86_DEBUGCTL_BTS		(1 << 7)
+#define X86_DEBUGCTL_BTINT		(1 << 8)
+#define X86_DEBUGCTL_BTS_OFF_OS		(1 << 9)
+#define X86_DEBUGCTL_BTS_OFF_USR	(1 << 10)
+
+/*
+ * A debug store configuration.
+ *
+ * We only support architectures that use 64bit fields.
+ */
+struct debug_store {
+	u64	bts_buffer_base;
+	u64	bts_index;
+	u64	bts_absolute_maximum;
+	u64	bts_interrupt_threshold;
+	u64	pebs_buffer_base;
+	u64	pebs_index;
+	u64	pebs_absolute_maximum;
+	u64	pebs_interrupt_threshold;
+	u64	pebs_counter_reset[MAX_PEBS_COUNTERS];
+};
+
 struct cpu_hw_counters {
 	struct perf_counter	*counters[X86_PMC_IDX_MAX];
 	unsigned long		used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
 	unsigned long		active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
 	unsigned long		interrupts;
 	int			enabled;
+	struct debug_store	*ds;
 };
 
 /*
@@ -57,6 +99,8 @@ struct x86_pmu {
 	u64		counter_mask;
 	u64		max_period;
 	u64		intel_ctrl;
+	void		(*enable_bts)(u64 config);
+	void		(*disable_bts)(void);
 };
 
 static struct x86_pmu x86_pmu __read_mostly;
@@ -576,6 +620,9 @@ x86_perf_counter_update(struct perf_counter *counter,
 	u64 prev_raw_count, new_raw_count;
 	s64 delta;
 
+	if (idx == X86_PMC_IDX_FIXED_BTS)
+		return 0;
+
 	/*
 	 * Careful: an NMI might modify the previous counter value.
 	 *
@@ -659,10 +706,109 @@ static void release_pmc_hardware(void)
 		enable_lapic_nmi_watchdog();
 }
 
+static inline bool bts_available(void)
+{
+	return x86_pmu.enable_bts != NULL;
+}
+
+static inline void init_debug_store_on_cpu(int cpu)
+{
+	struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
+
+	if (!ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
+		     (u32)((u64)(long)ds), (u32)((u64)(long)ds >> 32));
+}
+
+static inline void fini_debug_store_on_cpu(int cpu)
+{
+	if (!per_cpu(cpu_hw_counters, cpu).ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
+}
+
+static void release_bts_hardware(void)
+{
+	int cpu;
+
+	if (!bts_available())
+		return;
+
+	get_online_cpus();
+
+	for_each_online_cpu(cpu)
+		fini_debug_store_on_cpu(cpu);
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
+
+		if (!ds)
+			continue;
+
+		per_cpu(cpu_hw_counters, cpu).ds = NULL;
+
+		kfree((void *)(long)ds->bts_buffer_base);
+		kfree(ds);
+	}
+
+	put_online_cpus();
+}
+
+static int reserve_bts_hardware(void)
+{
+	int cpu, err = 0;
+
+	if (!bts_available())
+		return -EOPNOTSUPP;
+
+	get_online_cpus();
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds;
+		void *buffer;
+
+		err = -ENOMEM;
+		buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL);
+		if (unlikely(!buffer))
+			break;
+
+		ds = kzalloc(sizeof(*ds), GFP_KERNEL);
+		if (unlikely(!ds)) {
+			kfree(buffer);
+			break;
+		}
+
+		ds->bts_buffer_base = (u64)(long)buffer;
+		ds->bts_index = ds->bts_buffer_base;
+		ds->bts_absolute_maximum =
+			ds->bts_buffer_base + BTS_BUFFER_SIZE;
+		ds->bts_interrupt_threshold =
+			ds->bts_absolute_maximum - BTS_OVFL_TH;
+
+		per_cpu(cpu_hw_counters, cpu).ds = ds;
+		err = 0;
+	}
+
+	if (err)
+		release_bts_hardware();
+	else {
+		for_each_online_cpu(cpu)
+			init_debug_store_on_cpu(cpu);
+	}
+
+	put_online_cpus();
+
+	return err;
+}
+
 static void hw_perf_counter_destroy(struct perf_counter *counter)
 {
 	if (atomic_dec_and_mutex_lock(&active_counters, &pmc_reserve_mutex)) {
 		release_pmc_hardware();
+		release_bts_hardware();
 		mutex_unlock(&pmc_reserve_mutex);
 	}
 }
@@ -705,6 +851,42 @@ set_ext_hw_attr(struct hw_perf_counter *hwc, struct perf_counter_attr *attr)
 	return 0;
 }
 
+static void intel_pmu_enable_bts(u64 config)
+{
+	unsigned long debugctlmsr;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr |= X86_DEBUGCTL_TR;
+	debugctlmsr |= X86_DEBUGCTL_BTS;
+	debugctlmsr |= X86_DEBUGCTL_BTINT;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_OS))
+		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_OS;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_USR))
+		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_USR;
+
+	update_debugctlmsr(debugctlmsr);
+}
+
+static void intel_pmu_disable_bts(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	unsigned long debugctlmsr;
+
+	if (!cpuc->ds)
+		return;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr &=
+		~(X86_DEBUGCTL_TR | X86_DEBUGCTL_BTS | X86_DEBUGCTL_BTINT |
+		  X86_DEBUGCTL_BTS_OFF_OS | X86_DEBUGCTL_BTS_OFF_USR);
+
+	update_debugctlmsr(debugctlmsr);
+}
+
 /*
  * Setup the hardware configuration for a given attr_type
  */
@@ -721,9 +903,13 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	err = 0;
 	if (!atomic_inc_not_zero(&active_counters)) {
 		mutex_lock(&pmc_reserve_mutex);
-		if (atomic_read(&active_counters) == 0 && !reserve_pmc_hardware())
-			err = -EBUSY;
-		else
+		if (atomic_read(&active_counters) == 0) {
+			if (!reserve_pmc_hardware())
+				err = -EBUSY;
+			else
+				reserve_bts_hardware();
+		}
+		if (!err)
 			atomic_inc(&active_counters);
 		mutex_unlock(&pmc_reserve_mutex);
 	}
@@ -801,7 +987,18 @@ static void p6_pmu_disable_all(void)
 
 static void intel_pmu_disable_all(void)
 {
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	barrier();
+
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
+		intel_pmu_disable_bts();
 }
 
 static void amd_pmu_disable_all(void)
@@ -859,7 +1056,25 @@ static void p6_pmu_enable_all(void)
 
 static void intel_pmu_enable_all(void)
 {
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
+		struct perf_counter *counter =
+			cpuc->counters[X86_PMC_IDX_FIXED_BTS];
+
+		if (WARN_ON_ONCE(!counter))
+			return;
+
+		intel_pmu_enable_bts(counter->hw.config);
+	}
 }
 
 static void amd_pmu_enable_all(void)
@@ -946,6 +1161,11 @@ p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 static inline void
 intel_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 {
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		intel_pmu_disable_bts();
+		return;
+	}
+
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
 		intel_pmu_disable_fixed(hwc, idx);
 		return;
@@ -974,6 +1194,9 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 	s64 period = hwc->sample_period;
 	int err, ret = 0;
 
+	if (idx == X86_PMC_IDX_FIXED_BTS)
+		return 0;
+
 	/*
 	 * If we are way outside a reasoable range then just skip forward:
 	 */
@@ -1056,6 +1279,14 @@ static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 
 static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		if (!__get_cpu_var(cpu_hw_counters).enabled)
+			return;
+
+		intel_pmu_enable_bts(hwc->config);
+		return;
+	}
+
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
 		intel_pmu_enable_fixed(hwc, idx);
 		return;
@@ -1077,11 +1308,16 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 {
 	unsigned int event;
 
+	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
+
+	if (unlikely((event ==
+		      x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS)) &&
+		     (hwc->sample_period == 1)))
+		return X86_PMC_IDX_FIXED_BTS;
+
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
-	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
-
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
 		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
@@ -1102,7 +1338,25 @@ static int x86_pmu_enable(struct perf_counter *counter)
 	int idx;
 
 	idx = fixed_mode_idx(counter, hwc);
-	if (idx >= 0) {
+	if (idx == X86_PMC_IDX_FIXED_BTS) {
+		/*
+		 * Try to use BTS for branch tracing. If that is not
+		 * available, try to get a generic counter.
+		 */
+		if (unlikely(!cpuc->ds))
+			goto try_generic;
+
+		/*
+		 * Try to get the fixed counter, if that is already taken
+		 * then try to get a generic counter:
+		 */
+		if (test_and_set_bit(idx, cpuc->used_mask))
+			goto try_generic;
+
+		hwc->config_base	= 0;
+		hwc->counter_base	= 0;
+		hwc->idx		= idx;
+	} else if (idx >= 0) {
 		/*
 		 * Try to get the fixed counter, if that is already taken
 		 * then try to get a generic counter:
@@ -1213,6 +1467,45 @@ void perf_counter_print_debug(void)
 	local_irq_restore(flags);
 }
 
+static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
+				       struct perf_sample_data *data)
+{
+	struct debug_store *ds = cpuc->ds;
+	struct bts_record {
+		u64	from;
+		u64	to;
+		u64	flags;
+	};
+	struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
+	unsigned long orig_ip = data->regs->ip;
+	u64 at;
+
+	if (!counter)
+		return;
+
+	if (!ds)
+		return;
+
+	for (at = ds->bts_buffer_base;
+	     at < ds->bts_index;
+	     at += sizeof(struct bts_record)) {
+		struct bts_record *rec = (struct bts_record *)(long)at;
+
+		data->regs->ip	= rec->from;
+		data->addr	= rec->to;
+
+		perf_counter_output(counter, 1, data);
+	}
+
+	ds->bts_index = ds->bts_buffer_base;
+
+	data->regs->ip	= orig_ip;
+	data->addr	= 0;
+
+	/* There's new data available. */
+	counter->pending_kill = POLL_IN;
+}
+
 static void x86_pmu_disable(struct perf_counter *counter)
 {
 	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -1237,6 +1530,15 @@ static void x86_pmu_disable(struct perf_counter *counter)
 	 * that we are disabling:
 	 */
 	x86_perf_counter_update(counter, hwc, idx);
+
+	/* Drain the remaining BTS records. */
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		struct perf_sample_data data;
+		struct pt_regs regs;
+
+		data.regs = &regs;
+		intel_pmu_drain_bts_buffer(cpuc, &data);
+	}
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
 
@@ -1264,6 +1566,7 @@ static int intel_pmu_save_and_restart(struct perf_counter *counter)
 
 static void intel_pmu_reset(void)
 {
+	struct debug_store *ds = __get_cpu_var(cpu_hw_counters).ds;
 	unsigned long flags;
 	int idx;
 
@@ -1281,6 +1584,8 @@ static void intel_pmu_reset(void)
 	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
 		checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
 	}
+	if (ds)
+		ds->bts_index = ds->bts_buffer_base;
 
 	local_irq_restore(flags);
 }
@@ -1346,6 +1651,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	perf_disable();
+	intel_pmu_drain_bts_buffer(cpuc, &data);
 	status = intel_pmu_get_status();
 	if (!status) {
 		perf_enable();
@@ -1547,6 +1853,8 @@ static struct x86_pmu intel_pmu = {
 	 * the generic counter period:
 	 */
 	.max_period		= (1ULL << 31) - 1,
+	.enable_bts		= intel_pmu_enable_bts,
+	.disable_bts		= intel_pmu_disable_bts,
 };
 
 static struct x86_pmu amd_pmu = {
@@ -1936,3 +2244,8 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 
 	return entry;
 }
+
+void hw_perf_counter_setup_online(int cpu)
+{
+	init_debug_store_on_cpu(cpu);
+}
-- 
cgit v1.2.3


From 9f51e24ee8b5a1595b6a5ac0c2be278a16488e75 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Sun, 9 Aug 2009 21:54:00 +0200
Subject: x86: Use printk_once()

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <1249847649-11631-6-git-send-email-marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/irq_32.c | 5 ++---
 arch/x86/kvm/x86.c       | 7 +------
 2 files changed, 3 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 3b09634a515..7d35d0fe232 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -218,7 +218,6 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 void fixup_irqs(void)
 {
 	unsigned int irq;
-	static int warned;
 	struct irq_desc *desc;
 
 	for_each_irq_desc(irq, desc) {
@@ -236,8 +235,8 @@ void fixup_irqs(void)
 		}
 		if (desc->chip->set_affinity)
 			desc->chip->set_affinity(irq, affinity);
-		else if (desc->action && !(warned++))
-			printk("Cannot set affinity for irq %i\n", irq);
+		else if (desc->action)
+			printk_once("Cannot set affinity for irq %i\n", irq);
 	}
 
 #if 0
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fe5474aec41..0572c90f0c8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2261,12 +2261,7 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 				     unsigned int bytes,
 				     struct kvm_vcpu *vcpu)
 {
-	static int reported;
-
-	if (!reported) {
-		reported = 1;
-		printk(KERN_WARNING "kvm: emulating exchange as write\n");
-	}
+	printk_once(KERN_WARNING "kvm: emulating exchange as write\n");
 #ifndef CONFIG_X86_64
 	/* guests cmpxchg8b have to be emulated atomically */
 	if (bytes == 8) {
-- 
cgit v1.2.3


From 4a15235e79f5160a34100b362af2c674d191d0a5 Mon Sep 17 00:00:00 2001
From: Wan ZongShun <mcuos.com@gmail.com>
Date: Sun, 9 Aug 2009 21:22:22 -0700
Subject: Input: add keypad driver for w90p910

Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
new file mode 100644
index 00000000000..79462faaa18
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_W90P910_KEYPAD_H
+#define __ASM_ARCH_W90P910_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+extern void mfp_set_groupi(struct device *dev);
+
+struct w90p910_keypad_platform_data {
+
+	unsigned int	prescale;
+	unsigned int	debounce;
+	unsigned int	matrix_key_rows;
+	unsigned int	matrix_key_cols;
+	unsigned int	*matrix_key_map;
+	int		matrix_key_map_size;
+};
+
+#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
-- 
cgit v1.2.3


From 09113aea553cfaf074fd669cd0465daac4cea6e8 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sun, 9 Aug 2009 21:22:22 -0700
Subject: Input: w90p910_keypad - adjust to use definitions from
 matrix_keypad.h

Also have the driver send MSC_SCAN events as most keyboards do to aid
in updating keymap from userspace.

Tested-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
index 79462faaa18..556778e8dda 100644
--- a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
+++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
@@ -6,13 +6,10 @@
 extern void mfp_set_groupi(struct device *dev);
 
 struct w90p910_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
 
 	unsigned int	prescale;
 	unsigned int	debounce;
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
 };
 
 #endif /* __ASM_ARCH_W90P910_KEYPAD_H */
-- 
cgit v1.2.3


From b2f2e8fee3d62f621e795f25b2fc0f51bbdb4af9 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 10 Aug 2009 16:36:38 +1000
Subject: powerpc/dma: pci_set_dma_mask() shouldn't fail if mask fits in RAM

On an iMac G5, the b43 driver is failing to initialise because trying to
set the dma mask to 30-bit fails. Even though there's only 512MiB of RAM
in the machine anyway:
	https://bugzilla.redhat.com/show_bug.cgi?id=514787

We should probably let it succeed if the available RAM in the system
doesn't exceed the requested limit.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/dma.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 20a60d661ba..ccf129d47d8 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -7,6 +7,7 @@
 
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/lmb.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 
@@ -90,11 +91,10 @@ static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
 static int dma_direct_dma_supported(struct device *dev, u64 mask)
 {
 #ifdef CONFIG_PPC64
-	/* Could be improved to check for memory though it better be
-	 * done via some global so platforms can set the limit in case
+	/* Could be improved so platforms can set the limit in case
 	 * they have limited DMA windows
 	 */
-	return mask >= DMA_BIT_MASK(32);
+	return mask >= (lmb_end_of_DRAM() - 1);
 #else
 	return 1;
 #endif
-- 
cgit v1.2.3


From a8ad568dd8ca122aa8048ea067d3599820d1c1b4 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 10 Aug 2009 11:53:10 +0900
Subject: dma-ops: Remove flush_write_buffers() in dma-mapping-common.h

This moves flush_write_buffers() in
asm-generic/dma-mapping-common.h to
arch/x86/kernel/pci-nommu.c.

The purpose of this patch is that, we can avoid defining NULL
flush_write_buffers() on IA64 and SPARC.

dma-mapping-common.h is used by X86 and IA64 (and SPARC soon)
but only X86 with CONFIG_X86_OOSTORE or CONFIG_X86_PPRO_FENCE
actually uses flush_write_buffers(). CONFIG_X86_OOSTORE or
CONFIG_X86_PPRO_FENCE is usable with only kernel/pci-nommu.c
(that is, not usable with other X86 IOMMU implementations such
as SWIOTLB, VT-d, etc) so we can safely move
flush_write_buffers() in asm-generic/dma-mapping-common.h to
arch/x86/kernel/pci-nommu.c.

The further discussion is:

  http://lkml.org/lkml/2009/6/28/104

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: davem@davemloft.net
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/pci-nommu.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index c0a4222bf62..a3933d4330c 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -79,12 +79,29 @@ static void nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
+static void nommu_sync_single_for_device(struct device *dev,
+			dma_addr_t addr, size_t size,
+			enum dma_data_direction dir)
+{
+	flush_write_buffers();
+}
+
+
+static void nommu_sync_sg_for_device(struct device *dev,
+			struct scatterlist *sg, int nelems,
+			enum dma_data_direction dir)
+{
+	flush_write_buffers();
+}
+
 struct dma_map_ops nommu_dma_ops = {
-	.alloc_coherent	= dma_generic_alloc_coherent,
-	.free_coherent	= nommu_free_coherent,
-	.map_sg		= nommu_map_sg,
-	.map_page	= nommu_map_page,
-	.is_phys	= 1,
+	.alloc_coherent		= dma_generic_alloc_coherent,
+	.free_coherent		= nommu_free_coherent,
+	.map_sg			= nommu_map_sg,
+	.map_page		= nommu_map_page,
+	.sync_single_for_device = nommu_sync_single_for_device,
+	.sync_sg_for_device	= nommu_sync_sg_for_device,
+	.is_phys		= 1,
 };
 
 void __init no_iommu_init(void)
-- 
cgit v1.2.3


From be02ff9940c0106dea1470462401a07c5d52e086 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:11 +0900
Subject: IA64: Remove NULL flush_write_buffers

flush_write_buffers() in dma-mapping-common.h was removed so we
can remove NULL flush_write_buffers() in IA64.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: davem@davemloft.net
LKML-Reference: <1249872797-1314-3-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/dma-mapping.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index f91829de329..8d3c79cd81e 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -44,7 +44,6 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
 #define get_dma_ops(dev) platform_dma_get_ops(dev)
-#define flush_write_buffers()
 
 #include <asm-generic/dma-mapping-common.h>
 
-- 
cgit v1.2.3


From bc0a14f154069cc4e42ea903c2c2b9984a94e4b7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:12 +0900
Subject: sparc: Use dma_map_ops struct

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-4-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/dma-mapping.h | 43 ++++++------------------------------
 arch/sparc/kernel/dma.c              | 16 +++++++++-----
 arch/sparc/kernel/iommu.c            | 16 +++++++++-----
 arch/sparc/kernel/pci_sun4v.c        | 14 +++++++-----
 4 files changed, 36 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 204e4bf6443..893f3ecc975 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -13,36 +13,7 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)	(1)
 
-struct dma_ops {
-	void *(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void (*free_coherent)(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t dma_handle);
-	dma_addr_t (*map_page)(struct device *dev, struct page *page,
-			       unsigned long offset, size_t size,
-			       enum dma_data_direction direction);
-	void (*unmap_page)(struct device *dev, dma_addr_t dma_addr,
-			   size_t size,
-			   enum dma_data_direction direction);
-	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
-	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
-			 int nhwentries,
-			 enum dma_data_direction direction);
-	void (*sync_single_for_cpu)(struct device *dev,
-				    dma_addr_t dma_handle, size_t size,
-				    enum dma_data_direction direction);
-	void (*sync_single_for_device)(struct device *dev,
-				       dma_addr_t dma_handle, size_t size,
-				       enum dma_data_direction direction);
-	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
-				int nelems,
-				enum dma_data_direction direction);
-	void (*sync_sg_for_device)(struct device *dev,
-				   struct scatterlist *sg, int nents,
-				   enum dma_data_direction dir);
-};
-extern const struct dma_ops *dma_ops;
+extern const struct dma_map_ops *dma_ops;
 
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
@@ -62,40 +33,40 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
 {
 	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
 				 (unsigned long)cpu_addr & ~PAGE_MASK, size,
-				 direction);
+				 direction, NULL);
 }
 
 static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
 				    size_t size,
 				    enum dma_data_direction direction)
 {
-	dma_ops->unmap_page(dev, dma_addr, size, direction);
+	dma_ops->unmap_page(dev, dma_addr, size, direction, NULL);
 }
 
 static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 				      unsigned long offset, size_t size,
 				      enum dma_data_direction direction)
 {
-	return dma_ops->map_page(dev, page, offset, size, direction);
+	return dma_ops->map_page(dev, page, offset, size, direction, NULL);
 }
 
 static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 				  size_t size,
 				  enum dma_data_direction direction)
 {
-	dma_ops->unmap_page(dev, dma_address, size, direction);
+	dma_ops->unmap_page(dev, dma_address, size, direction, NULL);
 }
 
 static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
 			     int nents, enum dma_data_direction direction)
 {
-	return dma_ops->map_sg(dev, sg, nents, direction);
+	return dma_ops->map_sg(dev, sg, nents, direction, NULL);
 }
 
 static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 				int nents, enum dma_data_direction direction)
 {
-	dma_ops->unmap_sg(dev, sg, nents, direction);
+	dma_ops->unmap_sg(dev, sg, nents, direction, NULL);
 }
 
 static inline void dma_sync_single_for_cpu(struct device *dev,
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index 524c32f97c5..473a3fc7ab5 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -60,7 +60,8 @@ static void dma32_free_coherent(struct device *dev, size_t size,
 
 static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
 				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
+				 enum dma_data_direction direction,
+				 struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -72,7 +73,8 @@ static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
 }
 
 static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
-			     size_t size, enum dma_data_direction direction)
+			     size_t size, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -85,7 +87,8 @@ static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
 }
 
 static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction direction)
+			int nents, enum dma_data_direction direction,
+			struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -95,7 +98,8 @@ static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
 }
 
 void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
-		    int nents, enum dma_data_direction direction)
+		    int nents, enum dma_data_direction direction,
+		    struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -161,7 +165,7 @@ static void dma32_sync_sg_for_device(struct device *dev,
 	BUG();
 }
 
-static const struct dma_ops dma32_dma_ops = {
+static const struct dma_map_ops dma32_dma_ops = {
 	.alloc_coherent		= dma32_alloc_coherent,
 	.free_coherent		= dma32_free_coherent,
 	.map_page		= dma32_map_page,
@@ -174,5 +178,5 @@ static const struct dma_ops dma32_dma_ops = {
 	.sync_sg_for_device	= dma32_sync_sg_for_device,
 };
 
-const struct dma_ops *dma_ops = &dma32_dma_ops;
+const struct dma_map_ops *dma_ops = &dma32_dma_ops;
 EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 0aeaefe696b..a9f0ad95518 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -353,7 +353,8 @@ static void dma_4u_free_coherent(struct device *dev, size_t size,
 
 static dma_addr_t dma_4u_map_page(struct device *dev, struct page *page,
 				  unsigned long offset, size_t sz,
-				  enum dma_data_direction direction)
+				  enum dma_data_direction direction,
+				  struct dma_attrs *attrs)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -474,7 +475,8 @@ do_flush_sync:
 }
 
 static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
-			      size_t sz, enum dma_data_direction direction)
+			      size_t sz, enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -520,7 +522,8 @@ static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
 }
 
 static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
-			 int nelems, enum dma_data_direction direction)
+			 int nelems, enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	struct scatterlist *s, *outs, *segstart;
 	unsigned long flags, handle, prot, ctx;
@@ -691,7 +694,8 @@ static unsigned long fetch_sg_ctx(struct iommu *iommu, struct scatterlist *sg)
 }
 
 static void dma_4u_unmap_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction)
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
 	unsigned long flags, ctx;
 	struct scatterlist *sg;
@@ -822,7 +826,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-static const struct dma_ops sun4u_dma_ops = {
+static const struct dma_map_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
 	.map_page		= dma_4u_map_page,
@@ -833,7 +837,7 @@ static const struct dma_ops sun4u_dma_ops = {
 	.sync_sg_for_cpu	= dma_4u_sync_sg_for_cpu,
 };
 
-const struct dma_ops *dma_ops = &sun4u_dma_ops;
+const struct dma_map_ops *dma_ops = &sun4u_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 int dma_supported(struct device *dev, u64 device_mask)
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 2485eaa2310..c4f7dce577d 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -232,7 +232,8 @@ static void dma_4v_free_coherent(struct device *dev, size_t size, void *cpu,
 
 static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page,
 				  unsigned long offset, size_t sz,
-				  enum dma_data_direction direction)
+				  enum dma_data_direction direction,
+				  struct dma_attrs *attrs)
 {
 	struct iommu *iommu;
 	unsigned long flags, npages, oaddr;
@@ -296,7 +297,8 @@ iommu_map_fail:
 }
 
 static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
-			      size_t sz, enum dma_data_direction direction)
+			      size_t sz, enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
@@ -336,7 +338,8 @@ static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
 }
 
 static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
-			 int nelems, enum dma_data_direction direction)
+			 int nelems, enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	struct scatterlist *s, *outs, *segstart;
 	unsigned long flags, handle, prot;
@@ -478,7 +481,8 @@ iommu_map_failed:
 }
 
 static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction)
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
 	struct pci_pbm_info *pbm;
 	struct scatterlist *sg;
@@ -535,7 +539,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 	/* Nothing to do... */
 }
 
-static const struct dma_ops sun4v_dma_ops = {
+static const struct dma_map_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
 	.map_page			= dma_4v_map_page,
-- 
cgit v1.2.3


From 02f7a18935eef0e56d9180fc3c35da6aad1ff3bb Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:13 +0900
Subject: sparc: Use asm-generic/dma-mapping-common.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-5-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/Kconfig                   |   1 +
 arch/sparc/include/asm/dma-mapping.h | 107 +++++------------------------------
 arch/sparc/kernel/dma.c              |   4 +-
 arch/sparc/kernel/iommu.c            |   4 +-
 arch/sparc/kernel/pci_sun4v.c        |   2 +-
 5 files changed, 19 insertions(+), 99 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3f8b6a92eab..5f2df99645c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,6 +25,7 @@ config SPARC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select RTC_CLASS
 	select RTC_DRV_M48T59
+	select HAVE_DMA_ATTRS
 
 config SPARC32
 	def_bool !64BIT
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 893f3ecc975..34c92264208 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -3,6 +3,7 @@
 
 #include <linux/scatterlist.h>
 #include <linux/mm.h>
+#include <linux/dma-debug.h>
 
 #define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
 
@@ -13,113 +14,31 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)	(1)
 
-extern const struct dma_map_ops *dma_ops;
+extern struct dma_map_ops *dma_ops;
 
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle)
-{
-	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
-				 (unsigned long)cpu_addr & ~PAGE_MASK, size,
-				 direction, NULL);
+	return dma_ops;
 }
 
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_ops->unmap_page(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_ops->map_page(dev, page, offset, size, direction, NULL);
-}
+#include <asm-generic/dma-mapping-common.h>
 
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_ops->unmap_page(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_ops->map_sg(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
-{
-	dma_ops->unmap_sg(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction direction)
-{
-	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction direction)
-{
-	if (dma_ops->sync_single_for_device)
-		dma_ops->sync_single_for_device(dev, dma_handle, size,
-						direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction direction)
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
 {
-	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
-}
+	struct dma_map_ops *ops = get_dma_ops(dev);
 
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction direction)
-{
-	if (dma_ops->sync_sg_for_device)
-		dma_ops->sync_sg_for_device(dev, sg, nelems, direction);
+	return ops->alloc_coherent(dev, size, dma_handle, flag);
 }
 
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction dir)
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
 {
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, dir);
-}
+	struct dma_map_ops *ops = get_dma_ops(dev);
 
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction dir)
-{
-	dma_sync_single_for_device(dev, dma_handle+offset, size, dir);
+	ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
-
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return (dma_addr == DMA_ERROR_CODE);
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index 473a3fc7ab5..15820a91817 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -165,7 +165,7 @@ static void dma32_sync_sg_for_device(struct device *dev,
 	BUG();
 }
 
-static const struct dma_map_ops dma32_dma_ops = {
+static struct dma_map_ops dma32_dma_ops = {
 	.alloc_coherent		= dma32_alloc_coherent,
 	.free_coherent		= dma32_free_coherent,
 	.map_page		= dma32_map_page,
@@ -178,5 +178,5 @@ static const struct dma_map_ops dma32_dma_ops = {
 	.sync_sg_for_device	= dma32_sync_sg_for_device,
 };
 
-const struct dma_map_ops *dma_ops = &dma32_dma_ops;
+struct dma_map_ops *dma_ops = &dma32_dma_ops;
 EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index a9f0ad95518..74b289cab55 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -826,7 +826,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-static const struct dma_map_ops sun4u_dma_ops = {
+static struct dma_map_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
 	.map_page		= dma_4u_map_page,
@@ -837,7 +837,7 @@ static const struct dma_map_ops sun4u_dma_ops = {
 	.sync_sg_for_cpu	= dma_4u_sync_sg_for_cpu,
 };
 
-const struct dma_map_ops *dma_ops = &sun4u_dma_ops;
+struct dma_map_ops *dma_ops = &sun4u_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 int dma_supported(struct device *dev, u64 device_mask)
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index c4f7dce577d..ee800f92792 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -539,7 +539,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 	/* Nothing to do... */
 }
 
-static const struct dma_map_ops sun4v_dma_ops = {
+static struct dma_map_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
 	.map_page			= dma_4v_map_page,
-- 
cgit v1.2.3


From 595cc8560783ea31ed1208dc1f97282a2a5606b7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:14 +0900
Subject: sparc: Remove no-op dma_4v_sync_single_for_cpu and
 dma_4v_sync_sg_for_cpu

Now sparc uses include/asm-generic/dma-mapping-common.h.
pci_sun4v.c doesn't need to have no-op
dma_4v_sync_single_for_cpu and dma_4v_sync_sg_for_cpu
(dma-mapping-common.h does nothing if sync_{single|sg}_for_cpu
hook is not defined). So we can remove them safely.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-6-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/pci_sun4v.c | 16 ----------------
 1 file changed, 16 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index ee800f92792..23c33ff9c31 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -525,20 +525,6 @@ static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-static void dma_4v_sync_single_for_cpu(struct device *dev,
-				       dma_addr_t bus_addr, size_t sz,
-				       enum dma_data_direction direction)
-{
-	/* Nothing to do... */
-}
-
-static void dma_4v_sync_sg_for_cpu(struct device *dev,
-				   struct scatterlist *sglist, int nelems,
-				   enum dma_data_direction direction)
-{
-	/* Nothing to do... */
-}
-
 static struct dma_map_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
@@ -546,8 +532,6 @@ static struct dma_map_ops sun4v_dma_ops = {
 	.unmap_page			= dma_4v_unmap_page,
 	.map_sg				= dma_4v_map_sg,
 	.unmap_sg			= dma_4v_unmap_sg,
-	.sync_single_for_cpu		= dma_4v_sync_single_for_cpu,
-	.sync_sg_for_cpu		= dma_4v_sync_sg_for_cpu,
 };
 
 static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
-- 
cgit v1.2.3


From c2c07dbd8742a26ab3f1ee8b82237a060a0d9f61 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:15 +0900
Subject: sparc: Replace sbus_map_single and sbus_unmap_single with
 sbus_map_page and sbus_unmap_page

This is a preparation for using asm-generic/pci-dma-compat.h;
SPARC32 has two dma_map_ops structures for pci and sbus
(removing arch/sparc/kernel/dma.c, PCI and SBUS DMA accessor).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-7-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/dma.c    | 5 ++---
 arch/sparc/kernel/dma.h    | 6 +++---
 arch/sparc/kernel/ioport.c | 7 +++++--
 3 files changed, 10 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index 15820a91817..a5d50dac735 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -68,8 +68,7 @@ static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
 		return pci_map_page(to_pci_dev(dev), page, offset,
 				    size, (int)direction);
 #endif
-	return sbus_map_single(dev, page_address(page) + offset,
-			       size, (int)direction);
+	return sbus_map_page(dev, page, offset, size, (int)direction);
 }
 
 static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
@@ -83,7 +82,7 @@ static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
 		return;
 	}
 #endif
-	sbus_unmap_single(dev, dma_address, size, (int)direction);
+	sbus_unmap_page(dev, dma_address, size, (int)direction);
 }
 
 static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h
index f8d8951adb5..680351ee0d4 100644
--- a/arch/sparc/kernel/dma.h
+++ b/arch/sparc/kernel/dma.h
@@ -1,8 +1,8 @@
 void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
 void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
-dma_addr_t sbus_map_single(struct device *dev, void *va,
-			   size_t len, int direction);
-void sbus_unmap_single(struct device *dev, dma_addr_t ba,
+dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+			 unsigned long offset, size_t len, int direction);
+void sbus_unmap_page(struct device *dev, dma_addr_t ba,
 		       size_t n, int direction);
 int sbus_map_sg(struct device *dev, struct scatterlist *sg,
 		int n, int direction);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 87ea0d03d97..39ff1e0c518 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -337,8 +337,11 @@ void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
  * CPU view of this memory may be inconsistent with
  * a device view and explicit flushing is necessary.
  */
-dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
+dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+			 unsigned long offset, size_t len, int direction)
 {
+	void *va = page_address(page) + offset;
+
 	/* XXX why are some lengths signed, others unsigned? */
 	if (len <= 0) {
 		return 0;
@@ -350,7 +353,7 @@ dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int directi
 	return mmu_get_scsi_one(dev, va, len);
 }
 
-void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
+void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n, int direction)
 {
 	mmu_release_scsi_one(dev, ba, n);
 }
-- 
cgit v1.2.3


From ee664a9252d24ef10317d1bba8fc8f4c6495b36c Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:16 +0900
Subject: sparc: Use asm-generic/pci-dma-compat

This converts SPARC to use asm-generic/pci-dma-compat instead
of the homegrown mechnism.

SPARC32 has two dma_map_ops structures for pci and sbus
(removing arch/sparc/kernel/dma.c, PCI and SBUS DMA accessor).
The global 'dma_ops' is set to sbus_dma_ops and get_dma_ops()
returns pci32_dma_ops for pci devices so we can use the
appropriate dma mapping operations.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-8-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/dma-mapping.h |   7 +-
 arch/sparc/include/asm/pci.h         |   3 +
 arch/sparc/include/asm/pci_32.h      | 105 -----------------------
 arch/sparc/include/asm/pci_64.h      |  88 -------------------
 arch/sparc/kernel/dma.c              | 155 ++-------------------------------
 arch/sparc/kernel/dma.h              |  14 ---
 arch/sparc/kernel/iommu.c            |   4 +-
 arch/sparc/kernel/ioport.c           | 162 ++++++++++++++++-------------------
 arch/sparc/kernel/pci.c              |   2 +-
 9 files changed, 96 insertions(+), 444 deletions(-)
 delete mode 100644 arch/sparc/kernel/dma.h

(limited to 'arch')

diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 34c92264208..2677818dc78 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -14,10 +14,15 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)	(1)
 
-extern struct dma_map_ops *dma_ops;
+extern struct dma_map_ops *dma_ops, pci32_dma_ops;
+extern struct bus_type pci_bus_type;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
+#if defined(CONFIG_SPARC32) && defined(CONFIG_PCI)
+	if (dev->bus == &pci_bus_type)
+		return &pci32_dma_ops;
+#endif
 	return dma_ops;
 }
 
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
index 6e14fd17933..d9c031f9910 100644
--- a/arch/sparc/include/asm/pci.h
+++ b/arch/sparc/include/asm/pci.h
@@ -5,4 +5,7 @@
 #else
 #include <asm/pci_32.h>
 #endif
+
+#include <asm-generic/pci-dma-compat.h>
+
 #endif
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index b41c4c19815..ac0e8369fd9 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -31,42 +31,8 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
-#include <asm/scatterlist.h>
-
 struct pci_dev;
 
-/* Allocate and map kernel buffer using consistent mode DMA for a device.
- * hwdev should be valid struct pci_dev pointer for PCI devices.
- */
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
-
-/* Free and unmap a consistent DMA buffer.
- * cpu_addr is what was returned from pci_alloc_consistent,
- * size must be the same as what as passed into pci_alloc_consistent,
- * and likewise dma_addr must be the same as what *dma_addrp was set to.
- *
- * References to the memory and mappings assosciated with cpu_addr/dma_addr
- * past this call are illegal.
- */
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
- */
-extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
-
-/* Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
-
 /* pci_unmap_{single,page} is not a nop, thus... */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
 	dma_addr_t ADDR_NAME;
@@ -81,69 +47,6 @@ extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
 	(((PTR)->LEN_NAME) = (VAL))
 
-/*
- * Same as above, only with pages instead of mapped addresses.
- */
-extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
-			unsigned long offset, size_t size, int direction);
-extern void pci_unmap_page(struct pci_dev *hwdev,
-			dma_addr_t dma_address, size_t size, int direction);
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, you
- * must first perform a pci_dma_sync_for_device, and then the device
- * again owns the buffer.
- */
-extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single_* but for a scatter-gather list,
- * same rules and usage.
- */
-extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
-	return 1;
-}
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
@@ -154,14 +57,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 }
 #endif
 
-#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
-
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
-					dma_addr_t dma_addr)
-{
-        return (dma_addr == PCI_DMA_ERROR_CODE);
-}
-
 struct device_node;
 extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
 
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 7a1e3566e59..5cc9f6aa549 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -35,37 +35,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
-static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-					 dma_addr_t *dma_handle)
-{
-	return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
-}
-
-static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
-				       void *vaddr, dma_addr_t dma_handle)
-{
-	return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
-}
-
-static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
-					size_t size, int direction)
-{
-	return dma_map_single(&pdev->dev, ptr, size,
-			      (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
-				    size_t size, int direction)
-{
-	dma_unmap_single(&pdev->dev, dma_addr, size,
-			 (enum dma_data_direction) direction);
-}
-
-#define pci_map_page(dev, page, off, size, dir) \
-	pci_map_single(dev, (page_address(page) + (off)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
-	pci_unmap_single(dev,addr,sz,dir)
-
 /* pci_unmap_{single,page} is not a nop, thus... */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
 	dma_addr_t ADDR_NAME;
@@ -80,57 +49,6 @@ static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
 	(((PTR)->LEN_NAME) = (VAL))
 
-static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
-			     int nents, int direction)
-{
-	return dma_map_sg(&pdev->dev, sg, nents,
-			  (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
-				int nents, int direction)
-{
-	dma_unmap_sg(&pdev->dev, sg, nents,
-		     (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
-					       dma_addr_t dma_handle,
-					       size_t size, int direction)
-{
-	dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
-				(enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
-						  dma_addr_t dma_handle,
-						  size_t size, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
-					   struct scatterlist *sg,
-					   int nents, int direction)
-{
-	dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
-			    (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
-					      struct scatterlist *sg,
-					      int nelems, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-
 /* PCI IOMMU mapping bypass support. */
 
 /* PCI 64-bit addressing works for all slots on all controller
@@ -140,12 +58,6 @@ extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
 #define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
 #define PCI64_ADDR_BASE		0xfffc000000000000UL
 
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
-					dma_addr_t dma_addr)
-{
-	return dma_mapping_error(&pdev->dev, dma_addr);
-}
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index a5d50dac735..b2fa3127f60 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -13,13 +13,17 @@
 #include <linux/pci.h>
 #endif
 
-#include "dma.h"
-
+/*
+ * Return whether the given PCI device DMA address mask can be
+ * supported properly.  For example, if your device can only drive the
+ * low 24-bits during PCI bus mastering, then you would pass
+ * 0x00ffffff as the mask to this function.
+ */
 int dma_supported(struct device *dev, u64 mask)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
-		return pci_dma_supported(to_pci_dev(dev), mask);
+		return 1;
 #endif
 	return 0;
 }
@@ -34,148 +38,3 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 	return -EOPNOTSUPP;
 }
 EXPORT_SYMBOL(dma_set_mask);
-
-static void *dma32_alloc_coherent(struct device *dev, size_t size,
-				  dma_addr_t *dma_handle, gfp_t flag)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
-#endif
-	return sbus_alloc_consistent(dev, size, dma_handle);
-}
-
-static void dma32_free_coherent(struct device *dev, size_t size,
-				void *cpu_addr, dma_addr_t dma_handle)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_free_consistent(to_pci_dev(dev), size,
-				    cpu_addr, dma_handle);
-		return;
-	}
-#endif
-	sbus_free_consistent(dev, size, cpu_addr, dma_handle);
-}
-
-static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction,
-				 struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_map_page(to_pci_dev(dev), page, offset,
-				    size, (int)direction);
-#endif
-	return sbus_map_page(dev, page, offset, size, (int)direction);
-}
-
-static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
-			     size_t size, enum dma_data_direction direction,
-			     struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_unmap_page(to_pci_dev(dev), dma_address,
-			       size, (int)direction);
-		return;
-	}
-#endif
-	sbus_unmap_page(dev, dma_address, size, (int)direction);
-}
-
-static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction direction,
-			struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
-#endif
-	return sbus_map_sg(dev, sg, nents, direction);
-}
-
-void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
-		    int nents, enum dma_data_direction direction,
-		    struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction);
-		return;
-	}
-#endif
-	sbus_unmap_sg(dev, sg, nents, (int)direction);
-}
-
-static void dma32_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-				      size_t size,
-				      enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
-					    size, (int)direction);
-		return;
-	}
-#endif
-	sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_single_for_device(struct device *dev,
-					 dma_addr_t dma_handle, size_t size,
-					 enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
-					       size, (int)direction);
-		return;
-	}
-#endif
-	sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				  int nelems, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg,
-					nelems, (int)direction);
-		return;
-	}
-#endif
-	BUG();
-}
-
-static void dma32_sync_sg_for_device(struct device *dev,
-				     struct scatterlist *sg, int nelems,
-				     enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_sg_for_device(to_pci_dev(dev), sg,
-					   nelems, (int)direction);
-		return;
-	}
-#endif
-	BUG();
-}
-
-static struct dma_map_ops dma32_dma_ops = {
-	.alloc_coherent		= dma32_alloc_coherent,
-	.free_coherent		= dma32_free_coherent,
-	.map_page		= dma32_map_page,
-	.unmap_page		= dma32_unmap_page,
-	.map_sg			= dma32_map_sg,
-	.unmap_sg		= dma32_unmap_sg,
-	.sync_single_for_cpu	= dma32_sync_single_for_cpu,
-	.sync_single_for_device	= dma32_sync_single_for_device,
-	.sync_sg_for_cpu	= dma32_sync_sg_for_cpu,
-	.sync_sg_for_device	= dma32_sync_sg_for_device,
-};
-
-struct dma_map_ops *dma_ops = &dma32_dma_ops;
-EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h
deleted file mode 100644
index 680351ee0d4..00000000000
--- a/arch/sparc/kernel/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
-dma_addr_t sbus_map_page(struct device *dev, struct page *page,
-			 unsigned long offset, size_t len, int direction);
-void sbus_unmap_page(struct device *dev, dma_addr_t ba,
-		       size_t n, int direction);
-int sbus_map_sg(struct device *dev, struct scatterlist *sg,
-		int n, int direction);
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg,
-		   int n, int direction);
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
-				  size_t size, int direction);
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba,
-				     size_t size, int direction);
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 74b289cab55..7690cc219ec 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -840,6 +840,8 @@ static struct dma_map_ops sun4u_dma_ops = {
 struct dma_map_ops *dma_ops = &sun4u_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
+extern int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask);
+
 int dma_supported(struct device *dev, u64 device_mask)
 {
 	struct iommu *iommu = dev->archdata.iommu;
@@ -853,7 +855,7 @@ int dma_supported(struct device *dev, u64 device_mask)
 
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
-		return pci_dma_supported(to_pci_dev(dev), device_mask);
+		return pci64_dma_supported(to_pci_dev(dev), device_mask);
 #endif
 
 	return 0;
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 39ff1e0c518..1eb60438965 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -48,8 +48,6 @@
 #include <asm/iommu.h>
 #include <asm/io-unit.h>
 
-#include "dma.h"
-
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
 static struct resource *_sparc_find_resource(struct resource *r,
@@ -246,7 +244,8 @@ EXPORT_SYMBOL(sbus_set_sbus64);
  * Typically devices use them for control blocks.
  * CPU may access them without any explicit flushing.
  */
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
+static void *sbus_alloc_coherent(struct device *dev, size_t len,
+				 dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct of_device *op = to_of_device(dev);
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
@@ -299,7 +298,8 @@ err_nopages:
 	return NULL;
 }
 
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
+static void sbus_free_coherent(struct device *dev, size_t n, void *p,
+			       dma_addr_t ba)
 {
 	struct resource *res;
 	struct page *pgv;
@@ -317,7 +317,7 @@ void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
 
 	n = (n + PAGE_SIZE-1) & PAGE_MASK;
 	if ((res->end-res->start)+1 != n) {
-		printk("sbus_free_consistent: region 0x%lx asked 0x%lx\n",
+		printk("sbus_free_consistent: region 0x%lx asked 0x%zx\n",
 		    (long)((res->end-res->start)+1), n);
 		return;
 	}
@@ -337,8 +337,10 @@ void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
  * CPU view of this memory may be inconsistent with
  * a device view and explicit flushing is necessary.
  */
-dma_addr_t sbus_map_page(struct device *dev, struct page *page,
-			 unsigned long offset, size_t len, int direction)
+static dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+				unsigned long offset, size_t len,
+				enum dma_data_direction dir,
+				struct dma_attrs *attrs)
 {
 	void *va = page_address(page) + offset;
 
@@ -353,12 +355,14 @@ dma_addr_t sbus_map_page(struct device *dev, struct page *page,
 	return mmu_get_scsi_one(dev, va, len);
 }
 
-void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n, int direction)
+static void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n,
+			    enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	mmu_release_scsi_one(dev, ba, n);
 }
 
-int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n,
+		       enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	mmu_get_scsi_sgl(dev, sg, n);
 
@@ -369,19 +373,38 @@ int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction
 	return n;
 }
 
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n,
+			  enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	mmu_release_scsi_sgl(dev, sg, n);
 }
 
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				 int n,	enum dma_data_direction dir)
 {
+	BUG();
 }
 
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+				    int n, enum dma_data_direction dir)
 {
+	BUG();
 }
 
+struct dma_map_ops sbus_dma_ops = {
+	.alloc_coherent		= sbus_alloc_coherent,
+	.free_coherent		= sbus_free_coherent,
+	.map_page		= sbus_map_page,
+	.unmap_page		= sbus_unmap_page,
+	.map_sg			= sbus_map_sg,
+	.unmap_sg		= sbus_unmap_sg,
+	.sync_sg_for_cpu	= sbus_sync_sg_for_cpu,
+	.sync_sg_for_device	= sbus_sync_sg_for_device,
+};
+
+struct dma_map_ops *dma_ops = &sbus_dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
 static int __init sparc_register_ioport(void)
 {
 	register_proc_sparc_ioport();
@@ -398,7 +421,8 @@ arch_initcall(sparc_register_ioport);
 /* Allocate and map kernel buffer using consistent mode DMA for a device.
  * hwdev should be valid struct pci_dev pointer for PCI devices.
  */
-void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba)
+static void *pci32_alloc_coherent(struct device *dev, size_t len,
+				  dma_addr_t *pba, gfp_t gfp)
 {
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
 	unsigned long va;
@@ -442,7 +466,6 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba)
 	*pba = virt_to_phys(va); /* equals virt_to_bus (R.I.P.) for us. */
 	return (void *) res->start;
 }
-EXPORT_SYMBOL(pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.
  * cpu_addr is what was returned from pci_alloc_consistent,
@@ -452,7 +475,8 @@ EXPORT_SYMBOL(pci_alloc_consistent);
  * References to the memory and mappings associated with cpu_addr/dma_addr
  * past this call are illegal.
  */
-void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
+static void pci32_free_coherent(struct device *dev, size_t n, void *p,
+				dma_addr_t ba)
 {
 	struct resource *res;
 	unsigned long pgp;
@@ -484,60 +508,18 @@ void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
 
 	free_pages(pgp, get_order(n));
 }
-EXPORT_SYMBOL(pci_free_consistent);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_* is performed.
- */
-dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
-    int direction)
-{
-	BUG_ON(direction == PCI_DMA_NONE);
-	/* IIep is write-through, not flushing. */
-	return virt_to_phys(ptr);
-}
-EXPORT_SYMBOL(pci_map_single);
-
-/* Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size,
-    int direction)
-{
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
-		mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
-		    (size + PAGE_SIZE-1) & PAGE_MASK);
-	}
-}
-EXPORT_SYMBOL(pci_unmap_single);
 
 /*
  * Same as pci_map_single, but with pages.
  */
-dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
-			unsigned long offset, size_t size, int direction)
+static dma_addr_t pci32_map_page(struct device *dev, struct page *page,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir,
+				 struct dma_attrs *attrs)
 {
-	BUG_ON(direction == PCI_DMA_NONE);
 	/* IIep is write-through, not flushing. */
 	return page_to_phys(page) + offset;
 }
-EXPORT_SYMBOL(pci_map_page);
-
-void pci_unmap_page(struct pci_dev *hwdev,
-			dma_addr_t dma_address, size_t size, int direction)
-{
-	BUG_ON(direction == PCI_DMA_NONE);
-	/* mmu_inval_dma_area XXX */
-}
-EXPORT_SYMBOL(pci_unmap_page);
 
 /* Map a set of buffers described by scatterlist in streaming
  * mode for DMA.  This is the scather-gather version of the
@@ -554,13 +536,13 @@ EXPORT_SYMBOL(pci_unmap_page);
  * Device ownership issues as mentioned above for pci_map_single are
  * the same here.
  */
-int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
-    int direction)
+static int pci32_map_sg(struct device *device, struct scatterlist *sgl,
+			int nents, enum dma_data_direction dir,
+			struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
 	/* IIep is write-through, not flushing. */
 	for_each_sg(sgl, sg, nents, n) {
 		BUG_ON(page_address(sg_page(sg)) == NULL);
@@ -569,20 +551,19 @@ int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
 	}
 	return nents;
 }
-EXPORT_SYMBOL(pci_map_sg);
 
 /* Unmap a set of streaming mode DMA translations.
  * Again, cpu read rules concerning calls here are the same as for
  * pci_unmap_single() above.
  */
-void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
-    int direction)
+static void pci32_unmap_sg(struct device *dev, struct scatterlist *sgl,
+			   int nents, enum dma_data_direction dir,
+			   struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		for_each_sg(sgl, sg, nents, n) {
 			BUG_ON(page_address(sg_page(sg)) == NULL);
 			mmu_inval_dma_area(
@@ -591,7 +572,6 @@ void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
 		}
 	}
 }
-EXPORT_SYMBOL(pci_unmap_sg);
 
 /* Make physical memory consistent for a single
  * streaming mode DMA translation before or after a transfer.
@@ -603,25 +583,23 @@ EXPORT_SYMBOL(pci_unmap_sg);
  * must first perform a pci_dma_sync_for_device, and then the
  * device again owns the buffer.
  */
-void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
+				      size_t size, enum dma_data_direction dir)
 {
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
 		    (size + PAGE_SIZE-1) & PAGE_MASK);
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_single_for_cpu);
 
-void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_device(struct device *dev, dma_addr_t ba,
+					 size_t size, enum dma_data_direction dir)
 {
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
 		    (size + PAGE_SIZE-1) & PAGE_MASK);
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_single_for_device);
 
 /* Make physical memory consistent for a set of streaming
  * mode DMA translations after a transfer.
@@ -629,13 +607,13 @@ EXPORT_SYMBOL(pci_dma_sync_single_for_device);
  * The same as pci_dma_sync_single_* but for a scatter-gather list,
  * same rules and usage.
  */
-void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl,
+				  int nents, enum dma_data_direction dir)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		for_each_sg(sgl, sg, nents, n) {
 			BUG_ON(page_address(sg_page(sg)) == NULL);
 			mmu_inval_dma_area(
@@ -644,15 +622,14 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int
 		}
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_sg_for_cpu);
 
-void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_device(struct device *device, struct scatterlist *sgl,
+				     int nents, enum dma_data_direction dir)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		for_each_sg(sgl, sg, nents, n) {
 			BUG_ON(page_address(sg_page(sg)) == NULL);
 			mmu_inval_dma_area(
@@ -661,7 +638,20 @@ void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl,
 		}
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
+
+struct dma_map_ops pci32_dma_ops = {
+	.alloc_coherent		= pci32_alloc_coherent,
+	.free_coherent		= pci32_free_coherent,
+	.map_page		= pci32_map_page,
+	.map_sg			= pci32_map_sg,
+	.unmap_sg		= pci32_unmap_sg,
+	.sync_single_for_cpu	= pci32_sync_single_for_cpu,
+	.sync_single_for_device	= pci32_sync_single_for_device,
+	.sync_sg_for_cpu	= pci32_sync_sg_for_cpu,
+	.sync_sg_for_device	= pci32_sync_sg_for_device,
+};
+EXPORT_SYMBOL(pci32_dma_ops);
+
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PROC_FS
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 57859ad2354..c6864866280 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -1039,7 +1039,7 @@ static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
 	pci_dev_put(ali_isa_bridge);
 }
 
-int pci_dma_supported(struct pci_dev *pdev, u64 device_mask)
+int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask)
 {
 	u64 dma_addr_mask;
 
-- 
cgit v1.2.3


From 451d7400a34cb679369e337d67f0238ed410f484 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:17 +0900
Subject: sparc: Add CONFIG_DMA_API_DEBUG support

All we need to do for CONFIG_DMA_API_DEBUG support is call
dma_debug_init() in DMA code common for SPARC32 and SPARC64.

Now SPARC32 uses two dma_map_ops structures for pci and sbus so
there is not much dma stuff for SPARC32 in kernel/dma.c.
kernel/ioport.c also includes dma stuff for SPARC32. So let's
put all the dma stuff for SPARC32 in kernel/ioport.c and make
kernel/dma.c common for SPARC32 and SPARC64.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-9-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/Kconfig                   |  1 +
 arch/sparc/include/asm/dma-mapping.h |  6 +++++-
 arch/sparc/kernel/Makefile           |  2 +-
 arch/sparc/kernel/dma.c              | 37 +++++-------------------------------
 arch/sparc/kernel/ioport.c           | 27 ++++++++++++++++++++++++++
 5 files changed, 39 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 5f2df99645c..233cff53a62 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,6 +26,7 @@ config SPARC
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 
 config SPARC32
 	def_bool !64BIT
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 2677818dc78..5a8c308e2b5 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -32,8 +32,11 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *cpu_addr;
 
-	return ops->alloc_coherent(dev, size, dma_handle, flag);
+	cpu_addr = ops->alloc_coherent(dev, size, dma_handle, flag);
+	debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+	return cpu_addr;
 }
 
 static inline void dma_free_coherent(struct device *dev, size_t size,
@@ -41,6 +44,7 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
 
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
 	ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 475ce4696ac..29b88a58066 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -61,7 +61,7 @@ obj-$(CONFIG_SPARC64_SMP) += cpumap.o
 obj-$(CONFIG_SPARC32)     += devres.o
 devres-y                  := ../../../kernel/irq/devres.o
 
-obj-$(CONFIG_SPARC32)     += dma.o
+obj-y                     += dma.o
 
 obj-$(CONFIG_SPARC32_PCI) += pcic.o
 
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index b2fa3127f60..e1ba8ee21b9 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -1,40 +1,13 @@
-/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc.
- *
- * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
- */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
+#include <linux/dma-debug.h>
 
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#endif
+#define PREALLOC_DMA_DEBUG_ENTRIES       (1 << 15)
 
-/*
- * Return whether the given PCI device DMA address mask can be
- * supported properly.  For example, if your device can only drive the
- * low 24-bits during PCI bus mastering, then you would pass
- * 0x00ffffff as the mask to this function.
- */
-int dma_supported(struct device *dev, u64 mask)
+static int __init dma_init(void)
 {
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return 1;
-#endif
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
 	return 0;
 }
-EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EOPNOTSUPP;
-}
-EXPORT_SYMBOL(dma_set_mask);
+fs_initcall(dma_init);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 1eb60438965..edbea232c61 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -654,6 +654,33 @@ EXPORT_SYMBOL(pci32_dma_ops);
 
 #endif /* CONFIG_PCI */
 
+/*
+ * Return whether the given PCI device DMA address mask can be
+ * supported properly.  For example, if your device can only drive the
+ * low 24-bits during PCI bus mastering, then you would pass
+ * 0x00ffffff as the mask to this function.
+ */
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return 1;
+#endif
+	return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+#endif
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+
 #ifdef CONFIG_PROC_FS
 
 static int
-- 
cgit v1.2.3


From c7425314c755d5f94da7c978205c85a7c6201212 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 9 Aug 2009 17:03:52 +0900
Subject: x86: Introduce GDT_ENTRY_INIT(), initialize bad_bios_desc statically

Fully initialize bad_bios_desc statically instead of doing some
fields statically and some dynamically.

Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090809080350.GA4765@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apm_32.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index febb2dab254..39a4462ef8a 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -403,7 +403,15 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
-static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092, 0, 0);
+
+/*
+ * Set up a segment that references the real mode segment 0x40
+ * that extends up to the end of page zero (that we have reserved).
+ * This is for buggy BIOS's that refer to (real mode) segment 0x40
+ * even though they are called in protected mode.
+ */
+static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092,
+			(unsigned long)__va(0x400UL), PAGE_SIZE - 0x400 - 1);
 
 static const char driver_version[] = "1.16ac";	/* no spaces */
 
@@ -2331,15 +2339,6 @@ static int __init apm_init(void)
 	}
 	pm_flags |= PM_APM;
 
-	/*
-	 * Set up a segment that references the real mode segment 0x40
-	 * that extends up to the end of page zero (that we have reserved).
-	 * This is for buggy BIOS's that refer to (real mode) segment 0x40
-	 * even though they are called in protected mode.
-	 */
-	set_desc_base(&bad_bios_desc, (unsigned long)__va(0x40UL << 4));
-	set_desc_limit(&bad_bios_desc, 4095 - (0x40 << 4));
-
 	/*
 	 * Set up the long jump entry point to the APM BIOS, which is called
 	 * from inline assembly.
-- 
cgit v1.2.3


From cd92204924fafbd5c7241dfd12ca3176d542e0c5 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 10 Aug 2009 14:49:50 +0300
Subject: OMAP: Fix testing of cpu defines for mach-omap1

There's no need to keep these defines limited in the ifdef block
for mach-omap2. It will just cause problems testing for the CPU
revision in the common code, like the next patch does for the DMA
errata.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/cpu.h | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index 285eaa3a827..11e73d9e892 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
 				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
-
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
 #define OMAP2420_REV_ES1_0	0x24200024
@@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
-- 
cgit v1.2.3


From 284119c48f4a0c469b3e0237b500e536b4bc7b6f Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Mon, 10 Aug 2009 14:49:50 +0300
Subject: OMAP2/3: DMA errata correction

This errata is valid for:
OMAP2420 Errata 1.85 Impacts all 2420 ES rev
OMAP2430 Errata 1.10 Impacts only ES1.0
Description: DMA may hang when several channels are used in parallel
OMAP3430: Not impacted, so remove the errata fix for omap3

Fixed issue reported on cpu_is_omap24xx check reported by Nishant Kamat

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Reviewed-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7677a4a1cef..e3ac94f0900 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -946,7 +946,9 @@ void omap_start_dma(int lch)
 
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-	} else if (cpu_class_is_omap2()) {
+	} else if (cpu_is_omap242x() ||
+		(cpu_is_omap243x() &&  omap_type() <= OMAP2430_REV_ES1_0)) {
+
 		/* Errata: Need to write lch even if not using chaining */
 		dma_write(lch, CLNK_CTRL(lch));
 	}
-- 
cgit v1.2.3


From 370bc1fdefb8a30018d98aca2fdfd6b6701082e7 Mon Sep 17 00:00:00 2001
From: Janboe Ye <yuan-bo.ye@motorola.com>
Date: Mon, 10 Aug 2009 14:49:50 +0300
Subject: OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after
 increasing vmalloc size

commit e85c205ac1427f2405021a36f083280ff0d0a35e increase vmalloc size.
vmalloc space will overlap with OMAP3 sram virtual address.

Signed-off-by: Li Hong Mei <hong-mei.li@motorola.com>
Signed-off-by: Janboe Ye <yuan-bo.ye@motorola.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/sram.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 4ea73804d21..2890b11f238 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -44,9 +44,9 @@
 #define OMAP2_SRAM_VA		0xe3000000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xd7000000
+#define OMAP3_SRAM_VA           0xe3000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
-#define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
 #define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
 #define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
-- 
cgit v1.2.3


From 5032902c331acc71956e47abd90d090181c5ef4a Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Mon, 10 Aug 2009 14:49:50 +0300
Subject: OMAP3: Overo: Fix smsc911x platform device resource value

Fixes a wrong setting of resource parameter list in
SMSC911x platform driver data structure for Overo case.

This fixes folowing warning when compiling for Overo board:

	warning: initialization from incompatible pointer type

Introduced since commit id:
	commit 172ef275444efa12d834fb9d1b1acdac92db47f7
	Author: Steve Sakoman <sakoman@gmail.com>
	Date:   Mon Feb 2 06:27:49 2009 +0000

	    ARM: Add SMSC911X support to Overo platform (V2)

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-overo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528fbfb..fec1bb19b9f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -146,7 +146,7 @@ static struct platform_device overo_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
-	.resource	= &overo_smsc911x_resources,
+	.resource	= overo_smsc911x_resources,
 	.dev		= {
 		.platform_data = &overo_smsc911x_config,
 	},
-- 
cgit v1.2.3


From dfc27b34496923b5f552eb9cdf20468045114ada Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Mon, 10 Aug 2009 14:49:51 +0300
Subject: OMAP3: RX51: Define TWL4030 USB transceiver in board file

Add OTG transceiver to RX51 platform data to prevent kernel NULL pointer
dereference during MUSB initialisation.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9a0bf6744a0..56d931a425f 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
 	.setup			= rx51_twlgpio_setup,
 };
 
+static struct twl4030_usb_data rx51_usb_data = {
+	.usb_mode		= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data rx51_twldata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
@@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.gpio			= &rx51_gpio_data,
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
+	.usb			= &rx51_usb_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-- 
cgit v1.2.3


From 22833044fbe2764d44ae03f58508e671652ca186 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Mon, 10 Aug 2009 14:49:51 +0300
Subject: OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up

twl_mmc_cleanup() must free up the regulators that were
allocated by twl_mmc_late_init().
This eliminates the below error when 'omap_hsmmc' module is
repeatedly loaded and unloaded.

"sysfs: cannot create duplicate filename '/devices/platform
 /mmci-omap-hs.0/microamps_requested_vmmc'"

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mmc-twl4030.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 1541fd4c8d0..3c04c2f1b23 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev)
 				if (i != 0)
 					break;
 				ret = PTR_ERR(reg);
+				hsmmc[i].vcc = NULL;
 				goto err;
 			}
 			hsmmc[i].vcc = reg;
@@ -165,8 +166,13 @@ done:
 static void twl_mmc_cleanup(struct device *dev)
 {
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
 
 	gpio_free(mmc->slots[0].switch_pin);
+	for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		regulator_put(hsmmc[i].vcc);
+		regulator_put(hsmmc[i].vcc_aux);
+	}
 }
 
 #ifdef CONFIG_PM
-- 
cgit v1.2.3


From 4177662ec9f5e50b69ef074369fdb429dd48d97e Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Mon, 10 Aug 2009 14:49:52 +0300
Subject: OMAP3: RX51: Updated rx51_defconfig

Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots.

Note that the regulator code should be moved from mmc-twl4030.c
to omap_hsmmc.c so it can be a module.

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/rx51_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index eb2cb31825c..f238df66efd 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
-- 
cgit v1.2.3


From 04e35357e2e3ff4e0cabd6468354cf3dbfeb4f27 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Mon, 10 Aug 2009 16:45:42 +0100
Subject: MN10300: includecheck fix: mn10300, pci.h

Fix the following 'make includecheck' warning:

  arch/mn10300/include/asm/pci.h: linux/mm.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/include/asm/pci.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index 35d2ed6396f..19aecc90f7a 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -59,7 +59,6 @@ void pcibios_penalize_isa_irq(int irq);
 #include <linux/slab.h>
 #include <asm/scatterlist.h>
 #include <linux/string.h>
-#include <linux/mm.h>
 #include <asm/io.h>
 
 struct pci_dev;
-- 
cgit v1.2.3


From b6e61eef4f9f94714ac3ee4a5c96862d9bcd1836 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 31 Jul 2009 12:45:41 -0700
Subject: x86: Fix serialization in pit_expect_msb()

Wei Chong Tan reported a fast-PIT-calibration corner-case:

| pit_expect_msb() is vulnerable to SMI disturbance corner case
| in some platforms which causes /proc/cpuinfo to show wrong
| CPU MHz value when quick_pit_calibrate() jumps to success
| section.

I think that the real issue isn't even an SMI - but the fact
that in the very last iteration of the loop, there's no
serializing instruction _after_ the last 'rdtsc'. So even in
the absense of SMI's, we do have a situation where the cycle
counter was read without proper serialization.

The last check should be done outside the outer loop, since
_inside_ the outer loop, we'll be testing that the PIT has
the right MSB value has the right value in the next iteration.

So only the _last_ iteration is special, because that's the one
that will not check the PIT MSB value any more, and because the
final 'get_cycles()' isn't serialized.

In other words:

 - I'd like to move the PIT MSB check to after the last
   iteration, rather than in every iteration

 - I think we should comment on the fact that it's also a
   serializing instruction and so 'fences in' the TSC read.

Here's a suggested replacement.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: "Tan, Wei Chong" <wei.chong.tan@intel.com>
Tested-by: "Tan, Wei Chong" <wei.chong.tan@intel.com>
LKML-Reference: <B28277FD4E0F9247A3D55704C440A140D5D683F3@pgsmsx504.gar.corp.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tsc.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 6e1a368d21d..71f4368b357 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -275,15 +275,20 @@ static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
  * use the TSC value at the transitions to calculate a pretty
  * good value for the TSC frequencty.
  */
+static inline int pit_verify_msb(unsigned char val)
+{
+	/* Ignore LSB */
+	inb(0x42);
+	return inb(0x42) == val;
+}
+
 static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
 {
 	int count;
 	u64 tsc = 0;
 
 	for (count = 0; count < 50000; count++) {
-		/* Ignore LSB */
-		inb(0x42);
-		if (inb(0x42) != val)
+		if (!pit_verify_msb(val))
 			break;
 		tsc = get_cycles();
 	}
@@ -336,8 +341,7 @@ static unsigned long quick_pit_calibrate(void)
 	 * to do that is to just read back the 16-bit counter
 	 * once from the PIT.
 	 */
-	inb(0x42);
-	inb(0x42);
+	pit_verify_msb(0);
 
 	if (pit_expect_msb(0xff, &tsc, &d1)) {
 		for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
@@ -348,8 +352,19 @@ static unsigned long quick_pit_calibrate(void)
 			 * Iterate until the error is less than 500 ppm
 			 */
 			delta -= tsc;
-			if (d1+d2 < delta >> 11)
-				goto success;
+			if (d1+d2 >= delta >> 11)
+				continue;
+
+			/*
+			 * Check the PIT one more time to verify that
+			 * all TSC reads were stable wrt the PIT.
+			 *
+			 * This also guarantees serialization of the
+			 * last cycle read ('d2') in pit_expect_msb.
+			 */
+			if (!pit_verify_msb(0xfe - i))
+				break;
+			goto success;
 		}
 	}
 	printk("Fast TSC calibration failed\n");
-- 
cgit v1.2.3


From 3e03bbeac541856aaaf1ce1ab0250b6a490e4099 Mon Sep 17 00:00:00 2001
From: Shunichi Fuji <palglowr@gmail.com>
Date: Tue, 11 Aug 2009 03:34:40 +0900
Subject: x86: Add reboot quirk for every 5 series MacBook/Pro
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Reboot does not work on my MacBook Pro 13 inch (MacBookPro5,5)
too. It seems all unibody MacBook and MacBookPro require
PCI reboot handling, i guess.

Following model/machine ID list shows unibody MacBook/Pro have
the 5 series of model number:

   http://www.everymac.com/systems/by_capability/macs-by-machine-model-machine-id.html

Signed-off-by: Shunichi Fuji <palglowr@gmail.com>
Cc: Ozan Çağlayan <ozan@pardus.org.tr>
LKML-Reference: <30046e3b0908101134p6487ddbftd8776e4ddef204be@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/reboot.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 9eb89760370..a06e8d10184 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -418,20 +418,20 @@ static int __init set_pci_reboot(const struct dmi_system_id *d)
 }
 
 static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
-	{	/* Handle problems with rebooting on Apple MacBook5,2 */
+	{	/* Handle problems with rebooting on Apple MacBook5 */
 		.callback = set_pci_reboot,
-		.ident = "Apple MacBook",
+		.ident = "Apple MacBook5",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"),
 		},
 	},
-	{	/* Handle problems with rebooting on Apple MacBookPro5,1 */
+	{	/* Handle problems with rebooting on Apple MacBookPro5 */
 		.callback = set_pci_reboot,
-		.ident = "Apple MacBookPro5,1",
+		.ident = "Apple MacBookPro5",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,1"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
 		},
 	},
 	{ }
-- 
cgit v1.2.3


From 5b7e88edc6193f36941bccbfd5ed9ed5fe27d2e1 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 31 Jul 2009 09:41:40 +0800
Subject: x86, mce: Support specifying context for software mce injection

The cpu context is specified via the new mce.inject_flags fields.
This allows more realistic machine check testing in different
situations. "RANDOM" context is implemented via NMI broadcasting to
add randomization to testing.

AK: Fix NMI broadcasting check. Fix 32-bit building. Some race
fixes. Move to module. Various changes

ChangeLog:

v3:

- Re-based on latest x86-tip.git/mce4

- Fix 32-bit building

v2:

- Re-base on latest x86-tip.git/mce3

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/mce.h              |  11 ++-
 arch/x86/kernel/cpu/mcheck/mce-inject.c | 156 ++++++++++++++++++++++++++------
 2 files changed, 135 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index ad753537291..8945be9ad2b 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -38,6 +38,13 @@
 #define MCM_ADDR_MEM	 3	/* memory address */
 #define MCM_ADDR_GENERIC 7	/* generic */
 
+#define MCJ_CTX_MASK		3
+#define MCJ_CTX(flags)		((flags) & MCJ_CTX_MASK)
+#define MCJ_CTX_RANDOM		0    /* inject context: random */
+#define MCJ_CTX_PROCESS		1    /* inject context: process */
+#define MCJ_CTX_IRQ		2    /* inject context: IRQ */
+#define MCJ_NMI_BROADCAST	4    /* do NMI broadcasting */
+
 /* Fields are zero when not available */
 struct mce {
 	__u64 status;
@@ -48,8 +55,8 @@ struct mce {
 	__u64 tsc;	/* cpu time stamp counter */
 	__u64 time;	/* wall time_t when error was detected */
 	__u8  cpuvendor;	/* cpu vendor as encoded in system.h */
-	__u8  pad1;
-	__u16 pad2;
+	__u8  inject_flags;	/* software inject flags */
+	__u16  pad;
 	__u32 cpuid;	/* CPUID 1 EAX */
 	__u8  cs;		/* code segment */
 	__u8  bank;	/* machine check bank */
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index a3a235a53f0..ad5d92790eb 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -18,7 +18,12 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
+#include <linux/notifier.h>
+#include <linux/kdebug.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
 #include <asm/mce.h>
+#include <asm/apic.h>
 
 /* Update fake mce registers on current CPU. */
 static void inject_mce(struct mce *m)
@@ -39,44 +44,141 @@ static void inject_mce(struct mce *m)
 	i->finished = 1;
 }
 
-struct delayed_mce {
-	struct timer_list timer;
-	struct mce m;
+static void raise_corrected(struct mce *m)
+{
+	unsigned long flags;
+	mce_banks_t b;
+
+	memset(&b, 0xff, sizeof(mce_banks_t));
+	local_irq_save(flags);
+	machine_check_poll(0, &b);
+	local_irq_restore(flags);
+	m->finished = 0;
+}
+
+static void raise_uncorrected(struct mce *m, struct pt_regs *pregs)
+{
+	struct pt_regs regs;
+	unsigned long flags;
+
+	if (!pregs) {
+		memset(&regs, 0, sizeof(struct pt_regs));
+		regs.ip = m->ip;
+		regs.cs = m->cs;
+		pregs = &regs;
+	}
+	/* in mcheck exeception handler, irq will be disabled */
+	local_irq_save(flags);
+	do_machine_check(pregs, 0);
+	local_irq_restore(flags);
+	m->finished = 0;
+}
+
+static cpumask_t mce_inject_cpumask;
+
+static int mce_raise_notify(struct notifier_block *self,
+			    unsigned long val, void *data)
+{
+	struct die_args *args = (struct die_args *)data;
+	int cpu = smp_processor_id();
+	struct mce *m = &__get_cpu_var(injectm);
+	if (val != DIE_NMI_IPI || !cpu_isset(cpu, mce_inject_cpumask))
+		return NOTIFY_DONE;
+	cpu_clear(cpu, mce_inject_cpumask);
+	if (m->status & MCI_STATUS_UC)
+		raise_uncorrected(m, args->regs);
+	else if (m->status)
+		raise_corrected(m);
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block mce_raise_nb = {
+	.notifier_call = mce_raise_notify,
+	.priority = 1000,
 };
 
 /* Inject mce on current CPU */
-static void raise_mce(unsigned long data)
+static int raise_local(struct mce *m)
 {
-	struct delayed_mce *dm = (struct delayed_mce *)data;
-	struct mce *m = &dm->m;
+	int context = MCJ_CTX(m->inject_flags);
+	int ret = 0;
 	int cpu = m->extcpu;
 
-	inject_mce(m);
 	if (m->status & MCI_STATUS_UC) {
-		struct pt_regs regs;
-		memset(&regs, 0, sizeof(struct pt_regs));
-		regs.ip = m->ip;
-		regs.cs = m->cs;
 		printk(KERN_INFO "Triggering MCE exception on CPU %d\n", cpu);
-		do_machine_check(&regs, 0);
+		switch (context) {
+		case MCJ_CTX_IRQ:
+			/*
+			 * Could do more to fake interrupts like
+			 * calling irq_enter, but the necessary
+			 * machinery isn't exported currently.
+			 */
+			/*FALL THROUGH*/
+		case MCJ_CTX_PROCESS:
+			raise_uncorrected(m, NULL);
+			break;
+		default:
+			printk(KERN_INFO "Invalid MCE context\n");
+			ret = -EINVAL;
+		}
 		printk(KERN_INFO "MCE exception done on CPU %d\n", cpu);
-	} else {
-		mce_banks_t b;
-		memset(&b, 0xff, sizeof(mce_banks_t));
+	} else if (m->status) {
 		printk(KERN_INFO "Starting machine check poll CPU %d\n", cpu);
-		machine_check_poll(0, &b);
+		raise_corrected(m);
 		mce_notify_irq();
-		printk(KERN_INFO "Finished machine check poll on CPU %d\n",
-		       cpu);
-	}
-	kfree(dm);
+		printk(KERN_INFO "Machine check poll done on CPU %d\n", cpu);
+	} else
+		m->finished = 0;
+
+	return ret;
+}
+
+static void raise_mce(struct mce *m)
+{
+	int context = MCJ_CTX(m->inject_flags);
+
+	inject_mce(m);
+
+	if (context == MCJ_CTX_RANDOM)
+		return;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (m->inject_flags & MCJ_NMI_BROADCAST) {
+		unsigned long start;
+		int cpu;
+		get_online_cpus();
+		mce_inject_cpumask = cpu_online_map;
+		cpu_clear(get_cpu(), mce_inject_cpumask);
+		for_each_online_cpu(cpu) {
+			struct mce *mcpu = &per_cpu(injectm, cpu);
+			if (!mcpu->finished ||
+			    MCJ_CTX(mcpu->inject_flags) != MCJ_CTX_RANDOM)
+				cpu_clear(cpu, mce_inject_cpumask);
+		}
+		if (!cpus_empty(mce_inject_cpumask))
+			apic->send_IPI_mask(&mce_inject_cpumask, NMI_VECTOR);
+		start = jiffies;
+		while (!cpus_empty(mce_inject_cpumask)) {
+			if (!time_before(jiffies, start + 2*HZ)) {
+				printk(KERN_ERR
+				"Timeout waiting for mce inject NMI %lx\n",
+					*cpus_addr(mce_inject_cpumask));
+				break;
+			}
+			cpu_relax();
+		}
+		raise_local(m);
+		put_cpu();
+		put_online_cpus();
+	} else
+#endif
+		raise_local(m);
 }
 
 /* Error injection interface */
 static ssize_t mce_write(struct file *filp, const char __user *ubuf,
 			 size_t usize, loff_t *off)
 {
-	struct delayed_mce *dm;
 	struct mce m;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -96,19 +198,12 @@ static ssize_t mce_write(struct file *filp, const char __user *ubuf,
 	if (m.extcpu >= num_possible_cpus() || !cpu_online(m.extcpu))
 		return -EINVAL;
 
-	dm = kmalloc(sizeof(struct delayed_mce), GFP_KERNEL);
-	if (!dm)
-		return -ENOMEM;
-
 	/*
 	 * Need to give user space some time to set everything up,
 	 * so do it a jiffie or two later everywhere.
-	 * Should we use a hrtimer here for better synchronization?
 	 */
-	memcpy(&dm->m, &m, sizeof(struct mce));
-	setup_timer(&dm->timer, raise_mce, (unsigned long)dm);
-	dm->timer.expires = jiffies + 2;
-	add_timer_on(&dm->timer, m.extcpu);
+	schedule_timeout(2);
+	raise_mce(&m);
 	return usize;
 }
 
@@ -116,6 +211,7 @@ static int inject_init(void)
 {
 	printk(KERN_INFO "Machine check injector initialized\n");
 	mce_chrdev_ops.write = mce_write;
+	register_die_notifier(&mce_raise_nb);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 0dcc66851f1091af421416c28a9458836885f522 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 31 Jul 2009 09:41:41 +0800
Subject: x86, mce: Support specifying raise mode for software MCE injection

Raise mode include raising as exception or raising as poll, it is
specified via the mce.inject_flags field.

This can be used to specify raise mode of UCNA, which is UC error but
raised not as exception. And this can be used to test the filter code
of poll handler or exception handler too. For example, enforce a poll
raise mode for a fatal MCE.

ChangeLog:

v2:

- Re-base on latest x86-tip.git/mce3

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/mce.h              |  1 +
 arch/x86/kernel/cpu/mcheck/mce-inject.c | 16 ++++++++--------
 2 files changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 8945be9ad2b..b608a64c581 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -44,6 +44,7 @@
 #define MCJ_CTX_PROCESS		1    /* inject context: process */
 #define MCJ_CTX_IRQ		2    /* inject context: IRQ */
 #define MCJ_NMI_BROADCAST	4    /* do NMI broadcasting */
+#define MCJ_EXCEPTION		8    /* raise as exception */
 
 /* Fields are zero when not available */
 struct mce {
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index ad5d92790eb..7029f0e2aca 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -44,7 +44,7 @@ static void inject_mce(struct mce *m)
 	i->finished = 1;
 }
 
-static void raise_corrected(struct mce *m)
+static void raise_poll(struct mce *m)
 {
 	unsigned long flags;
 	mce_banks_t b;
@@ -56,7 +56,7 @@ static void raise_corrected(struct mce *m)
 	m->finished = 0;
 }
 
-static void raise_uncorrected(struct mce *m, struct pt_regs *pregs)
+static void raise_exception(struct mce *m, struct pt_regs *pregs)
 {
 	struct pt_regs regs;
 	unsigned long flags;
@@ -85,10 +85,10 @@ static int mce_raise_notify(struct notifier_block *self,
 	if (val != DIE_NMI_IPI || !cpu_isset(cpu, mce_inject_cpumask))
 		return NOTIFY_DONE;
 	cpu_clear(cpu, mce_inject_cpumask);
-	if (m->status & MCI_STATUS_UC)
-		raise_uncorrected(m, args->regs);
+	if (m->inject_flags & MCJ_EXCEPTION)
+		raise_exception(m, args->regs);
 	else if (m->status)
-		raise_corrected(m);
+		raise_poll(m);
 	return NOTIFY_STOP;
 }
 
@@ -104,7 +104,7 @@ static int raise_local(struct mce *m)
 	int ret = 0;
 	int cpu = m->extcpu;
 
-	if (m->status & MCI_STATUS_UC) {
+	if (m->inject_flags & MCJ_EXCEPTION) {
 		printk(KERN_INFO "Triggering MCE exception on CPU %d\n", cpu);
 		switch (context) {
 		case MCJ_CTX_IRQ:
@@ -115,7 +115,7 @@ static int raise_local(struct mce *m)
 			 */
 			/*FALL THROUGH*/
 		case MCJ_CTX_PROCESS:
-			raise_uncorrected(m, NULL);
+			raise_exception(m, NULL);
 			break;
 		default:
 			printk(KERN_INFO "Invalid MCE context\n");
@@ -124,7 +124,7 @@ static int raise_local(struct mce *m)
 		printk(KERN_INFO "MCE exception done on CPU %d\n", cpu);
 	} else if (m->status) {
 		printk(KERN_INFO "Starting machine check poll CPU %d\n", cpu);
-		raise_corrected(m);
+		raise_poll(m);
 		mce_notify_irq();
 		printk(KERN_INFO "Machine check poll done on CPU %d\n", cpu);
 	} else
-- 
cgit v1.2.3


From 5be9ed251f58881dfc3dd6742a81ff9ad1a7bb04 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 31 Jul 2009 09:41:42 +0800
Subject: x86, mce: Move debugfs mce dir creating to mce.c

Because more debugfs files under mce dir will be create in mce.c.

ChangeLog:

v5:

- Rebased on x86-tip.git/mce

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce-internal.h |  1 +
 arch/x86/kernel/cpu/mcheck/mce-severity.c |  4 +---
 arch/x86/kernel/cpu/mcheck/mce.c          | 13 +++++++++++++
 3 files changed, 15 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h
index 6bd51e7ba87..32996f9fab6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -22,6 +22,7 @@ struct mce_bank {
 };
 
 int mce_severity(struct mce *a, int tolerant, char **msg);
+struct dentry *mce_get_debugfs_dir(void);
 
 extern int mce_ser;
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index 51f7c725dab..bc35a073d15 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -197,7 +197,7 @@ static int __init severities_debugfs_init(void)
 {
 	struct dentry *dmce = NULL, *fseverities_coverage = NULL;
 
-	dmce = debugfs_create_dir("mce", NULL);
+	dmce = mce_get_debugfs_dir();
 	if (dmce == NULL)
 		goto err_out;
 	fseverities_coverage = debugfs_create_file("severities-coverage",
@@ -209,8 +209,6 @@ static int __init severities_debugfs_init(void)
 	return 0;
 
 err_out:
-	if (dmce)
-		debugfs_remove(dmce);
 	return -ENOMEM;
 }
 late_initcall(severities_debugfs_init);
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 1ce6db1f878..9c7419e459d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -34,6 +34,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
+#include <linux/debugfs.h>
 
 #include <asm/processor.h>
 #include <asm/hw_irq.h>
@@ -2003,3 +2004,15 @@ static int __init mcheck_disable(char *str)
 	return 1;
 }
 __setup("nomce", mcheck_disable);
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *mce_get_debugfs_dir(void)
+{
+	static struct dentry *dmce;
+
+	if (!dmce)
+		dmce = debugfs_create_dir("mce", NULL);
+
+	return dmce;
+}
+#endif
-- 
cgit v1.2.3


From bf783f9f7d33576815bc89f9f1856a7309ea2f17 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Fri, 31 Jul 2009 09:41:43 +0800
Subject: x86, mce: Fake panic support for MCE testing

If "fake panic" mode is turned on, just log panic message instead of
go real panic. This is used for testing only, so that the test suite
can check for the correct panic message and do regression testing for
MCE would go panic.

This patch is based on x86-tip.git/mce.

ChangeLog:

v5:

- Rebased on x86-tip.git/mce

v4:

- Move config file from sysfs to debugfs

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 75 ++++++++++++++++++++++++++++++++++------
 1 file changed, 64 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 9c7419e459d..54bd1b2fb4c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -204,6 +204,9 @@ static void print_mce_tail(void)
 
 static atomic_t mce_paniced;
 
+static int fake_panic;
+static atomic_t mce_fake_paniced;
+
 /* Panic in progress. Enable interrupts and wait for final IPI */
 static void wait_for_panic(void)
 {
@@ -221,15 +224,21 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 {
 	int i;
 
-	/*
-	 * Make sure only one CPU runs in machine check panic
-	 */
-	if (atomic_inc_return(&mce_paniced) > 1)
-		wait_for_panic();
-	barrier();
+	if (!fake_panic) {
+		/*
+		 * Make sure only one CPU runs in machine check panic
+		 */
+		if (atomic_inc_return(&mce_paniced) > 1)
+			wait_for_panic();
+		barrier();
 
-	bust_spinlocks(1);
-	console_verbose();
+		bust_spinlocks(1);
+		console_verbose();
+	} else {
+		/* Don't log too much for fake panic */
+		if (atomic_inc_return(&mce_fake_paniced) > 1)
+			return;
+	}
 	print_mce_head();
 	/* First print corrected ones that are still unlogged */
 	for (i = 0; i < MCE_LOG_LEN; i++) {
@@ -256,9 +265,12 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 	print_mce_tail();
 	if (exp)
 		printk(KERN_EMERG "Machine check: %s\n", exp);
-	if (panic_timeout == 0)
-		panic_timeout = mce_panic_timeout;
-	panic(msg);
+	if (!fake_panic) {
+		if (panic_timeout == 0)
+			panic_timeout = mce_panic_timeout;
+		panic(msg);
+	} else
+		printk(KERN_EMERG "Fake kernel panic: %s\n", msg);
 }
 
 /* Support code for software error injection */
@@ -2015,4 +2027,45 @@ struct dentry *mce_get_debugfs_dir(void)
 
 	return dmce;
 }
+
+static void mce_reset(void)
+{
+	cpu_missing = 0;
+	atomic_set(&mce_fake_paniced, 0);
+	atomic_set(&mce_executing, 0);
+	atomic_set(&mce_callin, 0);
+	atomic_set(&global_nwo, 0);
+}
+
+static int fake_panic_get(void *data, u64 *val)
+{
+	*val = fake_panic;
+	return 0;
+}
+
+static int fake_panic_set(void *data, u64 val)
+{
+	mce_reset();
+	fake_panic = val;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fake_panic_fops, fake_panic_get,
+			fake_panic_set, "%llu\n");
+
+static int __init mce_debugfs_init(void)
+{
+	struct dentry *dmce, *ffake_panic;
+
+	dmce = mce_get_debugfs_dir();
+	if (!dmce)
+		return -ENOMEM;
+	ffake_panic = debugfs_create_file("fake_panic", 0444, dmce, NULL,
+					  &fake_panic_fops);
+	if (!ffake_panic)
+		return -ENOMEM;
+
+	return 0;
+}
+late_initcall(mce_debugfs_init);
 #endif
-- 
cgit v1.2.3


From 8f2208601f81b505710b0d13dbd80b687ccbca60 Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Mon, 22 Jun 2009 21:45:01 +0200
Subject: [ARM] orion5x: Add LaCie NAS d2Network support

This patch add support for the d2 Network and the Big Disk Network
LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Christopher Moore <moore@free.fr>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig       |  14 ++
 arch/arm/mach-orion5x/Makefile      |   2 +
 arch/arm/mach-orion5x/d2net-setup.c | 365 ++++++++++++++++++++++++++++++++++++
 3 files changed, 381 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/d2net-setup.c

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2c7035d8dcb..5062b05b76b 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -89,6 +89,20 @@ config MACH_EDMINI_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Ethernet Disk mini V2.
 
+config MACH_D2NET
+	bool "LaCie d2 Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network NAS.
+
+config MACH_BIGDISK
+	bool "LaCie Big Disk Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Big Disk Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index edc38e2c856..1db8a3a2708 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,6 +12,8 @@ obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
+obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
new file mode 100644
index 00000000000..9d4bf763f25
--- /dev/null
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-orion5x/d2net-setup.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define D2NET_NOR_BOOT_BASE		0xfff80000
+#define D2NET_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition d2net_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data d2net_nor_flash_data = {
+	.width		= 1,
+	.parts		= d2net_partitions,
+	.nr_parts	= ARRAY_SIZE(d2net_partitions),
+};
+
+static struct resource d2net_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= D2NET_NOR_BOOT_BASE,
+	.end			= D2NET_NOR_BOOT_BASE
+					+ D2NET_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device d2net_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &d2net_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &d2net_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x3e     | GMT G762     | PWM fan controller
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ *
+ * TODO: Add G762 support to the g760a driver.
+ */
+static struct i2c_board_info __initdata d2net_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_sata_data = {
+	.n_ports	= 2,
+};
+
+#define D2NET_GPIO_SATA0_POWER	3
+#define D2NET_GPIO_SATA1_POWER	12
+
+static void __init d2net_sata_power_init(void)
+{
+	int err;
+
+	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA0_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA0 power GPIO\n");
+
+	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA1_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA1 power GPIO\n");
+}
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity. This feature is disabled to make this LED compatible with
+ * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
+ * GPIO's and have to stay in an active state. This is needed to set the blue
+ * LED in a "fix on" state regardless of the SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED		6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
+#define D2NET_GPIO_BLUE_LED_OFF		23
+#define D2NET_GPIO_SATA0_ACT		14
+#define D2NET_GPIO_SATA1_ACT		15
+
+static struct gpio_led d2net_leds[] = {
+	{
+		.name = "d2net:blue:power",
+		.gpio = D2NET_GPIO_BLUE_LED_OFF,
+		.active_low = 1,
+	},
+	{
+		.name = "d2net:red:fail",
+		.gpio = D2NET_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+	.num_leds = ARRAY_SIZE(d2net_leds),
+	.leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &d2net_led_data,
+	},
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+	/* Configure GPIO over MPP max number. */
+	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
+
+	if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
+		return;
+	if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
+		goto err_free_1;
+	if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
+		goto err_free_1;
+	if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
+		goto err_free_2;
+	platform_device_register(&d2net_gpio_leds);
+	return;
+
+err_free_2:
+	gpio_free(D2NET_GPIO_SATA1_ACT);
+err_free_1:
+	gpio_free(D2NET_GPIO_SATA0_ACT);
+	return;
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_GPIO_PUSH_BUTTON		18
+#define D2NET_GPIO_POWER_SWITCH_ON	8
+#define D2NET_GPIO_POWER_SWITCH_OFF	9
+
+#define D2NET_SWITCH_POWER_ON		0x1
+#define D2NET_SWITCH_POWER_OFF		0x2
+
+static struct gpio_keys_button d2net_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_OFF,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_ON,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= D2NET_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_button_data = {
+	.buttons	= d2net_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_buttons),
+};
+
+static struct platform_device d2net_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Board ID (bit 0) */
+	{  1, MPP_GPIO },	/* Board ID (bit 1) */
+	{  2, MPP_GPIO },	/* Board ID (bit 2) */
+	{  3, MPP_GPIO },	/* SATA 0 power */
+	{  4, MPP_UNUSED },
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED */
+	{  7, MPP_UNUSED },
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_GPIO },	/* SATA 1 power */
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_GPIO },	/* SATA 0 active */
+	{ 15, MPP_GPIO },	/* SATA 1 active */
+	{ 16, MPP_GPIO },	/* Blue front LED blink control */
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_UNUSED },
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: Blue front LED off */
+	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
+};
+
+static void __init d2net_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(d2net_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&d2net_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	d2net_sata_power_init();
+	orion5x_sata_init(&d2net_sata_data);
+
+	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
+				D2NET_NOR_BOOT_SIZE);
+	platform_device_register(&d2net_nor_flash);
+
+	platform_device_register(&d2net_gpio_buttons);
+
+	d2net_gpio_leds_init();
+
+	pr_notice("d2net: Flash write are not yet supported.\n");
+
+	i2c_register_board_info(0, d2net_i2c_devices,
+				ARRAY_SIZE(d2net_i2c_devices));
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+
+#ifdef CONFIG_MACH_D2NET
+MACHINE_START(D2NET, "LaCie d2 Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BIGDISK
+MACHINE_START(BIGDISK, "LaCie Big Disk Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
-- 
cgit v1.2.3


From aec1bad326a99a8b0860fa9d518985ee388c9391 Mon Sep 17 00:00:00 2001
From: Siddarth Gore <gores@marvell.com>
Date: Tue, 9 Jun 2009 14:41:02 +0530
Subject: [ARM] Kirkwood: Add support for 6281-A1

Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c                | 5 ++++-
 arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0f691983801..0acb61f3c10 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1))
 		return 200000000;
 
 	return 166666667;
@@ -872,6 +873,8 @@ static char * __init kirkwood_id(void)
 			return "MV88F6281-Z0";
 		else if (rev == MV88F6281_REV_A0)
 			return "MV88F6281-A0";
+		else if (rev == MV88F6281_REV_A1)
+			return "MV88F6281-A1";
 		else
 			return "MV88F6281-Rev-Unsupported";
 	} else if (dev == MV88F6192_DEV_ID) {
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 07af858814a..54c132731d2 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -101,6 +101,7 @@
 #define MV88F6281_DEV_ID	0x6281
 #define MV88F6281_REV_Z0	0
 #define MV88F6281_REV_A0	2
+#define MV88F6281_REV_A1	3
 
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0
-- 
cgit v1.2.3


From 7153c360ebe5bcfb1e6b7980b90584c75c8c8e4d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 3 Aug 2009 16:25:12 +0200
Subject: =?UTF-8?q?=C2=B6ARM]=20Orion5x:=20fix=20cpu=20window=20mapping=20?=
 =?UTF-8?q?for=2088f6183?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On the 88f6183, orion5x's setup_cpu_win() fails to ever program any
mbus bridge remap registers, which causes transactions for PCI/PCIe
IO/MEM space to get sent to random mbus targets.  Adding a check for
the 6183 in orion5x_cpu_win_can_remap() is necessary and sufficient
to make PCIe wlan cards work on the 6183 reference design.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/addr-map.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index d78731edebb..1a5d6a0e260 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -84,7 +84,8 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	orion5x_pcie_id(&dev, &rev);
 	if ((dev == MV88F5281_DEV_ID && win < 4)
 	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2))
+	    || (dev == MV88F5181_DEV_ID && win < 2)
+	    || (dev == MV88F6183_DEV_ID && win < 4))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.3


From 7eeae54c68e91c46ec170e764d1cceac81f35969 Mon Sep 17 00:00:00 2001
From: Dhaval Vasa <dhaval.vasa@einfochips.com>
Date: Mon, 10 Aug 2009 17:37:34 +0530
Subject: [ARM] Kirkwood: Marvell OpenRD-Base board support

reference:
http://open-rd.org
http://code.google.com/p/openrd

This patch is tested for:
1. Boot from DRAM/NAND flash
2. NAND read/write/erase
3. GbE0
4. USB read/write

FIXME:
1. SD/UART1 selection
2. MPP configuration (currently, default)
3. PEX

Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/Kconfig             |  6 +++
 arch/arm/mach-kirkwood/Makefile            |  1 +
 arch/arm/mach-kirkwood/openrd_base-setup.c | 78 ++++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 arch/arm/mach-kirkwood/openrd_base-setup.c

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 25100f7acf4..0aca451b216 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -38,6 +38,12 @@ config MACH_TS219
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-119 and TS-219 Turbo NAS devices.
 
+config MACH_OPENRD_BASE
+	bool "Marvell OpenRD Base Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Base Board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9dd680e964d..80ab0ec90ee 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 00000000000..3144bb87578
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_base_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_base_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_base_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
-- 
cgit v1.2.3


From decf77079511fc5ef832ead074bb45e4e0b099c0 Mon Sep 17 00:00:00 2001
From: Ron Lee <ron@debian.org>
Date: Mon, 10 Aug 2009 18:23:48 +0530
Subject: [ARM] Kirkwood: Initialise SATA for OpenRD-Base

Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/openrd_base-setup.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 3144bb87578..947dfb8cd5b 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,6 +41,10 @@ static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
+static struct mv_sata_platform_data openrd_base_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data openrd_base_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
 };
@@ -63,6 +68,7 @@ static void __init openrd_base_init(void)
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sata_init(&openrd_base_sata_data);
 	kirkwood_sdio_init(&openrd_base_mvsdio_data);
 }
 
-- 
cgit v1.2.3


From 0d01f31439c1e4d602bf9fdc924ab66f407f5e38 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sun, 9 Aug 2009 21:44:49 -0700
Subject: x86, mce: therm_throt - change when we print messages

My Latitude d630 seems to be handling thermal events in SMI by
lowering the max frequency of the CPU till it cools down but
still leaks the "everything is normal" events.

This spams the console and with high priority printks.

Adjust therm_throt driver to only print messages about the fact
that temperatire returned back to normal when leaving the
throttling state.

Also lower the severity of "back to normal" message from
KERN_CRIT to KERN_INFO.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <20090810051513.0558F526EC9@mailhub.coreip.homeip.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index bff8dd191dd..8bc64cfbe93 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -36,6 +36,7 @@
 
 static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
 static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
+static DEFINE_PER_CPU(bool, thermal_throttle_active);
 
 static atomic_t therm_throt_en		= ATOMIC_INIT(0);
 
@@ -96,24 +97,27 @@ static int therm_throt_process(int curr)
 {
 	unsigned int cpu = smp_processor_id();
 	__u64 tmp_jiffs = get_jiffies_64();
+	bool was_throttled = __get_cpu_var(thermal_throttle_active);
+	bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
 
-	if (curr)
+	if (is_throttled)
 		__get_cpu_var(thermal_throttle_count)++;
 
-	if (time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+	if (!(was_throttled ^ is_throttled) &&
+	    time_before64(tmp_jiffs, __get_cpu_var(next_check)))
 		return 0;
 
 	__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
 
 	/* if we just entered the thermal event */
-	if (curr) {
+	if (is_throttled) {
 		printk(KERN_CRIT "CPU%d: Temperature above threshold, "
-		       "cpu clock throttled (total events = %lu)\n", cpu,
-		       __get_cpu_var(thermal_throttle_count));
+		       "cpu clock throttled (total events = %lu)\n",
+		       cpu, __get_cpu_var(thermal_throttle_count));
 
 		add_taint(TAINT_MACHINE_CHECK);
-	} else {
-		printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
+	} else if (was_throttled) {
+		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
 	}
 
 	return 1;
-- 
cgit v1.2.3


From 3c581a7f94542341bf0da496a226b44ac63521a8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 11 Aug 2009 10:47:36 +0200
Subject: perf_counter, x86: Fix lapic printk message

Instead of this garbled bootup on UP Pentium-M systems:

[    0.015048] Performance Counters:
[    0.016004] no Local APIC, try rebooting with lapicno PMU driver, software counters only.

Print:

[    0.015050] Performance Counters:
[    0.016004] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.017003] no PMU driver, software counters only.

Cf: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index a7aa8f90095..40e233a24d9 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -1590,7 +1590,7 @@ static int p6_pmu_init(void)
 	}
 
 	if (!cpu_has_apic) {
-		pr_info("no Local APIC, try rebooting with lapic");
+		pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
 		return -ENODEV;
 	}
 
-- 
cgit v1.2.3


From f64ccccb8afa43abdd63fcbd230f818d6ea0883f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 11 Aug 2009 10:26:33 +0200
Subject: perf_counter, x86: Fix generic cache events on P6-mobile CPUs

Johannes Stezenbach reported that 'perf stat' does not count
cache-miss and cache-references events on his Pentium-M based
laptop.

This is because we left them blank in p6_perfmon_event_map[],
fill them in.

Reported-by: Johannes Stezenbach <js@sig21.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 40e233a24d9..fffc126dbdf 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -72,8 +72,8 @@ static const u64 p6_perfmon_event_map[] =
 {
   [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
   [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0000,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0000,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x012e,
   [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
   [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
   [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
-- 
cgit v1.2.3


From fbd8b1819e80ac5a176d085fdddc3a34d1499318 Mon Sep 17 00:00:00 2001
From: Kevin Winchester <kjwinchester@gmail.com>
Date: Mon, 10 Aug 2009 19:56:45 -0300
Subject: x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag

Due to an erratum with certain AMD Athlon 64 processors, the
BIOS may need to force enable the LAHF_LM capability.
Unfortunately, in at least one case, the BIOS does this even
for processors that do not support the functionality.

Add a specific check that will clear the feature bit for
processors known not to support the LAHF/SAHF instructions.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
LKML-Reference: <4A80A5AD.2000209@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/amd.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e2485b03f1c..63fddcd082c 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -400,6 +400,13 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		level = cpuid_eax(1);
 		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
 			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+		/*
+		 * Some BIOSes incorrectly force this feature, but only K8
+		 * revision D (model = 0x14) and later actually support it.
+		 */
+		if (c->x86_model < 0x14)
+			clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-- 
cgit v1.2.3


From dee2b904a1f93c275a015b67cd693038d74b18e8 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sun, 9 Aug 2009 21:21:57 +0200
Subject: IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

2.6.31-rc kernels don't boot on my ixp4xx box (ds101), because the libata
driver doesn't find the PCI IDE controller any more. 2.6.30 was fine.
I traced this to a PCI update (1f82de10d6b1d845155363c895c552e61b36b51a)
in 2.6.30-git19. Diffing the kernel boot logs from 2.6.30-git18 and
2.6.30-git19 illustrates the breakage:

> --- dmesg-2.6.30-git18	2009-08-04 01:45:22.000000000 +0200
> +++ dmesg-2.6.30-git19	2009-08-04 01:45:46.000000000 +0200
> @@ -26,6 +26,13 @@
>  pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot
>  pci 0000:00:02.2: PME# disabled
>  PCI: bus0: Fast back to back transfers disabled
> +pci 0000:00:01.0: BAR 0: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 1: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 2: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 3: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:01.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.0: BAR 4: can't allocate I/O resource [0x10000-0xffff]
> +pci 0000:00:02.1: BAR 4: can't allocate I/O resource [0x10000-0xffff]
>  bio: create slab <bio-0> at 0
>  SCSI subsystem initialized
>  NET: Registered protocol family 2
> @@ -44,11 +51,7 @@
>  console [ttyS0] enabled
>  serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale
>  Driver 'sd' needs updating - please use bus_type methods
> -PCI: enabling device 0000:00:01.0 (0140 -> 0141)
> -scsi0 : pata_artop
> -scsi1 : pata_artop
> -ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1060 bmdma 0x1040 irq 28
> -ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1064 bmdma 0x1048 irq 28
> +pata_artop 0000:00:01.0: no available native port
>  Using configured DiskOnChip probe address 0x50000000
>  DiskOnChip found at 0x50000000
>  NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit)

The specific change in 1f82de10d6b1d845155363c895c552e61b36b51a responsible
for this failure turned out to be the following:

> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
>  		res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
>  		if (type == pci_bar_io) {
>  			l &= PCI_BASE_ADDRESS_IO_MASK;
> -			mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff;
> +			mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
>  		} else {
>  			l &= PCI_BASE_ADDRESS_MEM_MASK;
>  			mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;

Every arch except arm's ixp4xx defines IO_SPACE_LIMIT as an all-bits-one
bitmask, typically -1UL but sometimes only a 16-bit 0x0000ffff. But ixp4xx
defines it as 0xffff0000, which is now causing the PCI failures.

Russell King noted that ixp4xx has 64KB PCI IO space, so IO_SPACE_LIMIT
should be 0x0000ffff. This patch makes that change, which fixes the PCI
failures on my ixp4xx box.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/include/mach/io.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index ce63048d45e..8a947d42a6f 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 
-#define IO_SPACE_LIMIT 0xffff0000
+#define IO_SPACE_LIMIT 0x0000ffff
 
 extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
 extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-- 
cgit v1.2.3


From eeac19a7efa150231e4a6bb110d6f27500bcc8ce Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 10 Aug 2009 16:52:13 -0400
Subject: tracing: Map syscall name to number

Add a new function to support translating a syscall name to number at
runtime.
This allows the syscall event tracer to map syscall names to number.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ftrace.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 8e9663413b7..afb31d72618 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -500,6 +500,22 @@ struct syscall_metadata *syscall_nr_to_meta(int nr)
 	return syscalls_metadata[nr];
 }
 
+int syscall_name_to_nr(char *name)
+{
+	int i;
+
+	if (!syscalls_metadata)
+		return -1;
+
+	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
+		if (syscalls_metadata[i]) {
+			if (!strcmp(syscalls_metadata[i]->name, name))
+				return i;
+		}
+	}
+	return -1;
+}
+
 void arch_init_ftrace_syscalls(void)
 {
 	int i;
-- 
cgit v1.2.3


From 066e0378c23f0a3db730893f6a041e4a3922a385 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 10 Aug 2009 16:52:23 -0400
Subject: tracing: Call arch_init_ftrace_syscalls at boot

Call arch_init_ftrace_syscalls at boot, so we can determine early the
set of syscalls for the syscall trace events.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ftrace.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index afb31d72618..0d93d409b8d 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -516,31 +516,24 @@ int syscall_name_to_nr(char *name)
 	return -1;
 }
 
-void arch_init_ftrace_syscalls(void)
+static int __init arch_init_ftrace_syscalls(void)
 {
 	int i;
 	struct syscall_metadata *meta;
 	unsigned long **psys_syscall_table = &sys_call_table;
-	static atomic_t refs;
-
-	if (atomic_inc_return(&refs) != 1)
-		goto end;
 
 	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
 					FTRACE_SYSCALL_MAX, GFP_KERNEL);
 	if (!syscalls_metadata) {
 		WARN_ON(1);
-		return;
+		return -ENOMEM;
 	}
 
 	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
 		meta = find_syscall_meta(psys_syscall_table[i]);
 		syscalls_metadata[i] = meta;
 	}
-	return;
-
-	/* Paranoid: avoid overflow */
-end:
-	atomic_dec(&refs);
+	return 0;
 }
+arch_initcall(arch_init_ftrace_syscalls);
 #endif
-- 
cgit v1.2.3


From a871bd33a6c0bc86fb47cd02ea2650dd43d3d95f Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 10 Aug 2009 16:52:31 -0400
Subject: tracing: Add syscall tracepoints

add two tracepoints in syscall exit and entry path, conditioned on
TIF_SYSCALL_FTRACE. Supports the syscall trace event code.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ptrace.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 09ecbde91c1..34dd6f15185 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -37,6 +37,9 @@
 
 #include <trace/syscall.h>
 
+DEFINE_TRACE(syscall_enter);
+DEFINE_TRACE(syscall_exit);
+
 #include "tls.h"
 
 enum x86_regset {
@@ -1498,7 +1501,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs)
 		ret = -1L;
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
-		ftrace_syscall_enter(regs);
+		trace_syscall_enter(regs, regs->orig_ax);
 
 	if (unlikely(current->audit_context)) {
 		if (IS_IA32)
@@ -1524,7 +1527,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
-		ftrace_syscall_exit(regs);
+		trace_syscall_exit(regs, regs->ax);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
-- 
cgit v1.2.3


From 9daa77e2e9a6b8b859660d5e24d0f8cd77c2af39 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 10 Aug 2009 16:52:35 -0400
Subject: tracing: Update FTRACE_SYSCALL_MAX

update FTRACE_SYSCALL_MAX to the current number of syscalls

FTRACE_SYSCALL_MAX is a temporary solution to get the number of
syscalls supported by the arch until we find a more dynamic way
to get this number.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/include/asm/ftrace.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index bd2c6511c88..71136545187 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -30,9 +30,9 @@
 
 /* FIXME: I don't want to stay hardcoded */
 #ifdef CONFIG_X86_64
-# define FTRACE_SYSCALL_MAX     296
+# define FTRACE_SYSCALL_MAX     299
 #else
-# define FTRACE_SYSCALL_MAX     333
+# define FTRACE_SYSCALL_MAX     337
 #endif
 
 #ifdef CONFIG_FUNCTION_TRACER
-- 
cgit v1.2.3


From 64c12e0444fcc6b75eb49144ba46d43dbdc6bc8f Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 10 Aug 2009 16:52:53 -0400
Subject: tracing: Add individual syscalls tracepoint id support

The current state of syscalls tracepoints generates only one event id
for every syscall events.

This patch associates an id with each syscall trace event, so that we
can identify each syscall trace event using the 'perf' tool.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ftrace.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 0d93d409b8d..3cff1214e17 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -516,6 +516,16 @@ int syscall_name_to_nr(char *name)
 	return -1;
 }
 
+void set_syscall_enter_id(int num, int id)
+{
+	syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+	syscalls_metadata[num]->exit_id = id;
+}
+
 static int __init arch_init_ftrace_syscalls(void)
 {
 	int i;
-- 
cgit v1.2.3


From 0ac676fb50f5f8a22e5e80afc40bf38e31b77c00 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 10 Aug 2009 16:53:11 -0400
Subject: tracing: Convert x86_64 mmap and uname to use DEFINE_SYSCALL

A number of syscalls are not using 'DEFINE_SYSCALL'. I'm not sure why.
Convert x86_64 uname and mmap to use DEFINE_SYSCALL.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/sys_x86_64.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 6bc211accf0..45e00eb09c3 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -18,9 +18,9 @@
 #include <asm/ia32.h>
 #include <asm/syscalls.h>
 
-asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
-		unsigned long prot, unsigned long flags,
-		unsigned long fd, unsigned long off)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags,
+		unsigned long, fd, unsigned long, off)
 {
 	long error;
 	struct file *file;
@@ -226,7 +226,7 @@ bottomup:
 }
 
 
-asmlinkage long sys_uname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(uname, struct new_utsname __user *, name)
 {
 	int err;
 	down_read(&uts_sem);
-- 
cgit v1.2.3


From 51b89f7a6615eca184aa0b85db5781d931e9c8d1 Mon Sep 17 00:00:00 2001
From: Fenghua Yu <[fenghua.yu@intel.com]>
Date: Tue, 11 Aug 2009 14:52:10 -0700
Subject: Bug Fix arch/ia64/kernel/pci-dma.c: fix recursive dma_supported()
 call in iommu_dma_supported()

In commit 160c1d8e40866edfeae7d68816b7005d70acf391,
dma_ops->dma_supported = iommu_dma_supported;

This dma_ops->dma_supported is first called in platform_dma_init() during kernel
boot. Then dma_ops->dma_supported will be called recursively in
iommu_dma_supported.

Kernel can not boot because kernel can not get out of iommu_dma_supported until
it runs out of stack memory.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/kernel/pci-dma.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c
index 05695962fe4..f6b1ff0aea7 100644
--- a/arch/ia64/kernel/pci-dma.c
+++ b/arch/ia64/kernel/pci-dma.c
@@ -69,11 +69,6 @@ iommu_dma_init(void)
 
 int iommu_dma_supported(struct device *dev, u64 mask)
 {
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-
-	if (ops->dma_supported)
-		return ops->dma_supported(dev, mask);
-
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
 	   The caller just has to use GFP_DMA in this case. */
-- 
cgit v1.2.3


From 8d6f9af91959256244878cd801c1c969e66cd093 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <[hannes@cmpxchg.org]>
Date: Tue, 11 Aug 2009 14:52:10 -0700
Subject: ia64: boolean __test_and_clear_bit

__test_and_clear_bit() returns a bitfield with the tested-for bit set.
Make it consistent with the other bitops - of ia64 but also every
other architecture - and return a boolean value.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/include/asm/bitops.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
index e2ca8003733..57a2787bc9f 100644
--- a/arch/ia64/include/asm/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
@@ -286,7 +286,7 @@ __test_and_clear_bit(int nr, volatile void * addr)
 {
 	__u32 *p = (__u32 *) addr + (nr >> 5);
 	__u32 m = 1 << (nr & 31);
-	int oldbitset = *p & m;
+	int oldbitset = (*p & m) != 0;
 
 	*p &= ~m;
 	return oldbitset;
-- 
cgit v1.2.3


From cfa5f809e399c699974ba6018eefa022bbc2e16e Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <[jaswinder@kernel.org]>
Date: Tue, 11 Aug 2009 14:52:10 -0700
Subject: IA64: includecheck fix: ia64, ia64_ksyms.c

fix the following 'make includecheck' warning:

  arch/ia64/kernel/ia64_ksyms.c: asm/page.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/kernel/ia64_ksyms.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 2d311864e35..8ebccb589e1 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -21,6 +21,7 @@ EXPORT_SYMBOL(csum_ipv6_magic);
 
 #include <asm/page.h>
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
 
 #ifdef CONFIG_VIRTUAL_MEM_MAP
 #include <linux/bootmem.h>
@@ -60,9 +61,6 @@ EXPORT_SYMBOL(__udivdi3);
 EXPORT_SYMBOL(__moddi3);
 EXPORT_SYMBOL(__umoddi3);
 
-#include <asm/page.h>
-EXPORT_SYMBOL(copy_page);
-
 #if defined(CONFIG_MD_RAID456) || defined(CONFIG_MD_RAID456_MODULE)
 extern void xor_ia64_2(void);
 extern void xor_ia64_3(void);
-- 
cgit v1.2.3


From b5a8879347bbe68bd24c8870503bf6a0362da26b Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <[jaswinder@kernel.org]>
Date: Tue, 11 Aug 2009 14:52:11 -0700
Subject: IA64: includecheck fix: ia64, pgtable.h

fix the following 'make includecheck' warning:

  arch/ia64/include/asm/pgtable.h: asm/processor.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/include/asm/pgtable.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 0a9cc73d35c..8840a690d1e 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -155,7 +155,6 @@
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
 #include <asm/mmu_context.h>
-#include <asm/processor.h>
 
 /*
  * Next come the mappings that determine how mmap() protection bits
-- 
cgit v1.2.3


From bf2a4c7270b9a22243a91ab5efcc47aaf997c66b Mon Sep 17 00:00:00 2001
From: Fenghua Yu <[fenghua.yu@intel.com]>
Date: Tue, 11 Aug 2009 14:52:11 -0700
Subject: arch/ia64/Makefile: Remove -mtune=merced in IA64 kernel build

Between GCC version 3.4.0 and 4.3.3 (including 3.4.0 and 4.3.3), -mtune=merced
is implemented in GCC. Starting from 4.4.0, -mtune=merced is deprecated.

Even implemented in versions between 3.4.0 and 4.3.3, the -mtune=merced
feature has been broken in some of the versions. For example, GCC 4.1.2 reports
interanl tuning function errors during kernel building with -mtune=merced. Or
GCC Bugzilla 16130 reports another -mtune=merced issue on GCC 3.4.1.

So I would remove the -mtune=merced from IA64 kernel build. Without this option,
kernel on Merced will remain the same except losing an unstable and out-of-date
performance tunning feature.

Since GCC version 3.4.0, -mtune=mckinley has been implemented. The
-mtune=mckinley option functions the same as mtune=itanium2. And mtune=itanium2
is the default option. So we don't need to add mtune=mckinley either since its
been the default option in any GCC version which implements this option.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/Makefile | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 58a7e46affd..e7cbaa02cd0 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -41,11 +41,6 @@ $(error Sorry, you need a newer version of the assember, one that is built from
 		ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
 endif
 
-ifeq ($(call cc-version),0304)
-	cflags-$(CONFIG_ITANIUM)	+= -mtune=merced
-	cflags-$(CONFIG_MCKINLEY)	+= -mtune=mckinley
-endif
-
 KBUILD_CFLAGS += $(cflags-y)
 head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o
 
-- 
cgit v1.2.3


From 5359dffd4396f281c5b77de1acbee6fb1b333b23 Mon Sep 17 00:00:00 2001
From: Fenghua Yu <fenghua.yu@intel.com>
Date: Tue, 11 Aug 2009 14:52:11 -0700
Subject: ia64/topology.c: exit cache_add_dev when kobject_init_and_add fails

Make cache_add_dev exit sysfs when kobject_init_and_add returns an error.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/kernel/topology.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index bc80dff1df7..8f060352e12 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -372,6 +372,10 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	retval = kobject_init_and_add(&all_cpu_cache_info[cpu].kobj,
 				      &cache_ktype_percpu_entry, &sys_dev->kobj,
 				      "%s", "cache");
+	if (unlikely(retval < 0)) {
+		cpu_cache_sysfs_exit(cpu);
+		return retval;
+	}
 
 	for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) {
 		this_object = LEAF_KOBJECT_PTR(cpu,i);
@@ -385,7 +389,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 			}
 			kobject_put(&all_cpu_cache_info[cpu].kobj);
 			cpu_cache_sysfs_exit(cpu);
-			break;
+			return retval;
 		}
 		kobject_uevent(&(this_object->kobj), KOBJ_ADD);
 	}
-- 
cgit v1.2.3


From e7369e01eb85550ed60dd1b0e120b69dfb03dc23 Mon Sep 17 00:00:00 2001
From: Roel Kluin <[roel.kluin@gmail.com]>
Date: Tue, 11 Aug 2009 14:52:11 -0700
Subject: arch/ia64/kernel/iosapic: missing test after ioremap()

Missing test after ioremap()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
---
 arch/ia64/kernel/iosapic.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index c48b03f2b61..dab4d393908 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -1072,6 +1072,10 @@ iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
 	}
 
 	addr = ioremap(phys_addr, 0);
+	if (addr == NULL) {
+		spin_unlock_irqrestore(&iosapic_lock, flags);
+		return -ENOMEM;
+	}
 	ver = iosapic_version(addr);
 	if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
 		iounmap(addr);
-- 
cgit v1.2.3


From e8055139d996e85722984968472868d6dccb1490 Mon Sep 17 00:00:00 2001
From: Ondrej Zary <linux@rainbow-software.org>
Date: Tue, 11 Aug 2009 20:00:11 +0200
Subject: x86: Fix oops in identify_cpu() on CPUs without CPUID

Kernel is broken for x86 CPUs without CPUID since 2.6.28. It
crashes with NULL pointer dereference in identify_cpu():

766        generic_identify(c);
767
768-->     if (this_cpu->c_identify)
769               this_cpu->c_identify(c);

this_cpu is NULL. This is because it's only initialized in
get_cpu_vendor() function, which is not called if the CPU has
no CPUID instruction.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
LKML-Reference: <200908112000.15993.linux@rainbow-software.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 48 ++++++++++++++++++++++----------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c07af9..5ce60a88027 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -59,7 +59,30 @@ void __init setup_cpu_local_masks(void)
 	alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask);
 }
 
-static const struct cpu_dev *this_cpu __cpuinitdata;
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_64
+	display_cacheinfo(c);
+#else
+	/* Not much we can do here... */
+	/* Check if at least it has cpuid */
+	if (c->cpuid_level == -1) {
+		/* No cpuid. It must be an ancient CPU */
+		if (c->x86 == 4)
+			strcpy(c->x86_model_id, "486");
+		else if (c->x86 == 3)
+			strcpy(c->x86_model_id, "386");
+	}
+#endif
+}
+
+static const struct cpu_dev __cpuinitconst default_cpu = {
+	.c_init		= default_init,
+	.c_vendor	= "Unknown",
+	.c_x86_vendor	= X86_VENDOR_UNKNOWN,
+};
+
+static const struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
 
 DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 #ifdef CONFIG_X86_64
@@ -332,29 +355,6 @@ void switch_to_new_gdt(int cpu)
 
 static const struct cpu_dev *__cpuinitdata cpu_devs[X86_VENDOR_NUM] = {};
 
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_64
-	display_cacheinfo(c);
-#else
-	/* Not much we can do here... */
-	/* Check if at least it has cpuid */
-	if (c->cpuid_level == -1) {
-		/* No cpuid. It must be an ancient CPU */
-		if (c->x86 == 4)
-			strcpy(c->x86_model_id, "486");
-		else if (c->x86 == 3)
-			strcpy(c->x86_model_id, "386");
-	}
-#endif
-}
-
-static const struct cpu_dev __cpuinitconst default_cpu = {
-	.c_init	= default_init,
-	.c_vendor = "Unknown",
-	.c_x86_vendor = X86_VENDOR_UNKNOWN,
-};
-
 static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
 {
 	unsigned int *v;
-- 
cgit v1.2.3


From 04da8a43da804723a550f00dd158fd5b5e25ae35 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 11 Aug 2009 10:40:08 +0200
Subject: perf_counter, x86: Fix/improve apic fallback

Johannes Stezenbach reported that his Pentium-M based
laptop does not have the local APIC enabled by default,
and hence perfcounters do not get initialized.

Add a fallback for this case: allow non-sampled counters
and return with an error on sampled counters. This allows
'perf stat' to work out of box - and allows 'perf top'
and 'perf record' to fall back on a hrtimer based sampling
method.

( Passing 'lapic' on the boot line will allow hardware
  sampling to occur - but if the APIC is disabled
  permanently by the hardware then this fallback still
  allows more systems to use perfcounters. )

Also decouple perfcounter support from X86_LOCAL_APIC.

-v2: fix typo breaking counters on all other systems ...

Reported-by: Johannes Stezenbach <js@sig21.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig                   |  2 +-
 arch/x86/kernel/cpu/perf_counter.c | 34 ++++++++++++++++++++++++++++++----
 2 files changed, 31 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 738bdc6b0f8..13ffa5df37d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -24,6 +24,7 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_PERF_COUNTERS if (!M386 && !M486)
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -742,7 +743,6 @@ config X86_UP_IOAPIC
 config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC
-	select HAVE_PERF_COUNTERS if (!M386 && !M486)
 
 config X86_IO_APIC
 	def_bool y
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index fffc126dbdf..900332b800f 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -55,6 +55,7 @@ struct x86_pmu {
 	int		num_counters_fixed;
 	int		counter_bits;
 	u64		counter_mask;
+	int		apic;
 	u64		max_period;
 	u64		intel_ctrl;
 };
@@ -613,6 +614,7 @@ static DEFINE_MUTEX(pmc_reserve_mutex);
 
 static bool reserve_pmc_hardware(void)
 {
+#ifdef CONFIG_X86_LOCAL_APIC
 	int i;
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
@@ -627,9 +629,11 @@ static bool reserve_pmc_hardware(void)
 		if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
 			goto eventsel_fail;
 	}
+#endif
 
 	return true;
 
+#ifdef CONFIG_X86_LOCAL_APIC
 eventsel_fail:
 	for (i--; i >= 0; i--)
 		release_evntsel_nmi(x86_pmu.eventsel + i);
@@ -644,10 +648,12 @@ perfctr_fail:
 		enable_lapic_nmi_watchdog();
 
 	return false;
+#endif
 }
 
 static void release_pmc_hardware(void)
 {
+#ifdef CONFIG_X86_LOCAL_APIC
 	int i;
 
 	for (i = 0; i < x86_pmu.num_counters; i++) {
@@ -657,6 +663,7 @@ static void release_pmc_hardware(void)
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		enable_lapic_nmi_watchdog();
+#endif
 }
 
 static void hw_perf_counter_destroy(struct perf_counter *counter)
@@ -748,6 +755,15 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 		hwc->sample_period = x86_pmu.max_period;
 		hwc->last_period = hwc->sample_period;
 		atomic64_set(&hwc->period_left, hwc->sample_period);
+	} else {
+		/*
+		 * If we have a PMU initialized but no APIC
+		 * interrupts, we cannot sample hardware
+		 * counters (user-space has to fall back and
+		 * sample via a hrtimer based software counter):
+		 */
+		if (!x86_pmu.apic)
+			return -EOPNOTSUPP;
 	}
 
 	counter->destroy = hw_perf_counter_destroy;
@@ -1449,18 +1465,22 @@ void smp_perf_pending_interrupt(struct pt_regs *regs)
 
 void set_perf_counter_pending(void)
 {
+#ifdef CONFIG_X86_LOCAL_APIC
 	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
+#endif
 }
 
 void perf_counters_lapic_init(void)
 {
-	if (!x86_pmu_initialized())
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (!x86_pmu.apic || !x86_pmu_initialized())
 		return;
 
 	/*
 	 * Always use NMI for PMU
 	 */
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
 }
 
 static int __kprobes
@@ -1484,7 +1504,9 @@ perf_counter_nmi_handler(struct notifier_block *self,
 
 	regs = args->regs;
 
+#ifdef CONFIG_X86_LOCAL_APIC
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
 	/*
 	 * Can't rely on the handled return value to say it was our NMI, two
 	 * counters could trigger 'simultaneously' raising two back-to-back NMIs.
@@ -1515,6 +1537,7 @@ static struct x86_pmu p6_pmu = {
 	.event_map		= p6_pmu_event_map,
 	.raw_event		= p6_pmu_raw_event,
 	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
+	.apic			= 1,
 	.max_period		= (1ULL << 31) - 1,
 	.version		= 0,
 	.num_counters		= 2,
@@ -1541,6 +1564,7 @@ static struct x86_pmu intel_pmu = {
 	.event_map		= intel_pmu_event_map,
 	.raw_event		= intel_pmu_raw_event,
 	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
 	/*
 	 * Intel PMCs cannot be accessed sanely above 32 bit width,
 	 * so we install an artificial 1<<31 period regardless of
@@ -1564,6 +1588,7 @@ static struct x86_pmu amd_pmu = {
 	.num_counters		= 4,
 	.counter_bits		= 48,
 	.counter_mask		= (1ULL << 48) - 1,
+	.apic			= 1,
 	/* use highest bit to detect overflow */
 	.max_period		= (1ULL << 47) - 1,
 };
@@ -1589,13 +1614,14 @@ static int p6_pmu_init(void)
 		return -ENODEV;
 	}
 
+	x86_pmu = p6_pmu;
+
 	if (!cpu_has_apic) {
 		pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
-		return -ENODEV;
+		pr_info("no hardware sampling interrupt available.\n");
+		x86_pmu.apic = 0;
 	}
 
-	x86_pmu				= p6_pmu;
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 81e2d7b30d718824434725a4a24d5864a71b1d30 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Wed, 12 Aug 2009 05:45:34 -0700
Subject: x86, intel_txt: tboot.c needs <asm/fixmap.h>

arch/x86/kernel/tboot.c needs <asm/fixmap.h>.  In most configurations
that ends up getting implicitly included, but not in all, causing
build failures in some configurations.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
Cc: Shane Wang <shane.wang@intel.com>
---
 arch/x86/kernel/tboot.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 263591afd29..1ab80120894 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -33,6 +33,7 @@
 #include <asm/bootparam.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/fixmap.h>
 #include <asm/setup.h>
 #include <asm/tboot.h>
 #include <asm/e820.h>
-- 
cgit v1.2.3


From ba9a633787eed1e90d587282642580ad3d44f7fd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 22 Jul 2009 15:14:29 +0000
Subject: sh: convert processor device setup functions to arch_initcall()

Convert the processor platform device setup
functions from __initcall() and sometimes
device_initcall() to arch_initcall().

This makes sure that the platform devices are
registered a bit earlier so the devices are
available when drivers register using initcall
levels earlier than device_initcall().

A good example is platform devices needed by
i2c-sh_mobile.c which registers a bit earlier
using subsys_initcall().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2/setup-sh7619.c  | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-mxg.c    | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 2 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7705.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh770x.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7710.c  | 2 +-
 arch/sh/kernel/cpu/sh3/setup-sh7720.c  | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh7750.c  | 2 +-
 arch/sh/kernel/cpu/sh4/setup-sh7760.c  | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 2 +-
 arch/sh/kernel/cpu/sh4a/setup-shx3.c   | 2 +-
 arch/sh/kernel/cpu/sh5/setup-sh5.c     | 2 +-
 24 files changed, 24 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 13798733f2d..8555c05e866 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -187,7 +187,7 @@ static int __init sh7619_devices_setup(void)
 	return platform_add_devices(sh7619_devices,
 				    ARRAY_SIZE(sh7619_devices));
 }
-__initcall(sh7619_devices_setup);
+arch_initcall(sh7619_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index 869c2da4820..b6737644531 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -238,7 +238,7 @@ static int __init mxg_devices_setup(void)
 	return platform_add_devices(mxg_devices,
 				    ARRAY_SIZE(mxg_devices));
 }
-__initcall(mxg_devices_setup);
+arch_initcall(mxg_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index d8febe12806..fbde5b75deb 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -357,7 +357,7 @@ static int __init sh7201_devices_setup(void)
 	return platform_add_devices(sh7201_devices,
 				    ARRAY_SIZE(sh7201_devices));
 }
-__initcall(sh7201_devices_setup);
+arch_initcall(sh7201_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index 62e3039d239..d3fd536c9a8 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -367,7 +367,7 @@ static int __init sh7203_devices_setup(void)
 	return platform_add_devices(sh7203_devices,
 				    ARRAY_SIZE(sh7203_devices));
 }
-__initcall(sh7203_devices_setup);
+arch_initcall(sh7203_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index 3e6f3d7a58b..a9ccc5e8d9e 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -338,7 +338,7 @@ static int __init sh7206_devices_setup(void)
 	return platform_add_devices(sh7206_devices,
 				    ARRAY_SIZE(sh7206_devices));
 }
-__initcall(sh7206_devices_setup);
+arch_initcall(sh7206_devices_setup);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 88f742fed9e..c2310598387 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -222,7 +222,7 @@ static int __init sh7705_devices_setup(void)
 	return platform_add_devices(sh7705_devices,
 				    ARRAY_SIZE(sh7705_devices));
 }
-__initcall(sh7705_devices_setup);
+arch_initcall(sh7705_devices_setup);
 
 static struct platform_device *sh7705_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index c5630679858..347ab35d069 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -250,7 +250,7 @@ static int __init sh770x_devices_setup(void)
 	return platform_add_devices(sh770x_devices,
 		ARRAY_SIZE(sh770x_devices));
 }
-__initcall(sh770x_devices_setup);
+arch_initcall(sh770x_devices_setup);
 
 static struct platform_device *sh770x_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index efa76c8148f..717e90ae109 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -226,7 +226,7 @@ static int __init sh7710_devices_setup(void)
 	return platform_add_devices(sh7710_devices,
 				    ARRAY_SIZE(sh7710_devices));
 }
-__initcall(sh7710_devices_setup);
+arch_initcall(sh7710_devices_setup);
 
 static struct platform_device *sh7710_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 5b2107798ed..74d8baaf8e9 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -388,7 +388,7 @@ static int __init sh7720_devices_setup(void)
 	return platform_add_devices(sh7720_devices,
 				    ARRAY_SIZE(sh7720_devices));
 }
-__initcall(sh7720_devices_setup);
+arch_initcall(sh7720_devices_setup);
 
 static struct platform_device *sh7720_early_devices[] __initdata = {
 	&cmt0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 6d088d12359..de4827df19a 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -138,7 +138,7 @@ static int __init sh4202_devices_setup(void)
 	return platform_add_devices(sh4202_devices,
 				    ARRAY_SIZE(sh4202_devices));
 }
-__initcall(sh4202_devices_setup);
+arch_initcall(sh4202_devices_setup);
 
 static struct platform_device *sh4202_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 851672d15cf..1b8b122e8f3 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -239,7 +239,7 @@ static int __init sh7750_devices_setup(void)
 	return platform_add_devices(sh7750_devices,
 				    ARRAY_SIZE(sh7750_devices));
 }
-__initcall(sh7750_devices_setup);
+arch_initcall(sh7750_devices_setup);
 
 static struct platform_device *sh7750_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 5b822519bd9..7fbb7be9284 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -265,7 +265,7 @@ static int __init sh7760_devices_setup(void)
 	return platform_add_devices(sh7760_devices,
 				    ARRAY_SIZE(sh7760_devices));
 }
-__initcall(sh7760_devices_setup);
+arch_initcall(sh7760_devices_setup);
 
 static struct platform_device *sh7760_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6307e087c86..ac4d5672ec1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -325,7 +325,7 @@ static int __init sh7343_devices_setup(void)
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
-__initcall(sh7343_devices_setup);
+arch_initcall(sh7343_devices_setup);
 
 static struct platform_device *sh7343_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index c18f7d09281..1a956b1becc 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -318,7 +318,7 @@ static int __init sh7366_devices_setup(void)
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
-__initcall(sh7366_devices_setup);
+arch_initcall(sh7366_devices_setup);
 
 static struct platform_device *sh7366_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index ea524a2da3e..cda76ebf87c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -359,7 +359,7 @@ static int __init sh7722_devices_setup(void)
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
-__initcall(sh7722_devices_setup);
+arch_initcall(sh7722_devices_setup);
 
 static struct platform_device *sh7722_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index e1bb80b2a27..b45dace9539 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -473,7 +473,7 @@ static int __init sh7723_devices_setup(void)
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
-__initcall(sh7723_devices_setup);
+arch_initcall(sh7723_devices_setup);
 
 static struct platform_device *sh7723_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index e5ac9eb11c6..a04edaab9a2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -508,7 +508,7 @@ static int __init sh7724_devices_setup(void)
 	return platform_add_devices(sh7724_devices,
 				    ARRAY_SIZE(sh7724_devices));
 }
-device_initcall(sh7724_devices_setup);
+arch_initcall(sh7724_devices_setup);
 
 static struct platform_device *sh7724_early_devices[] __initdata = {
 	&cmt_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f1e0c0d36da..4659fff6b84 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -314,7 +314,7 @@ static int __init sh7763_devices_setup(void)
 	return platform_add_devices(sh7763_devices,
 				    ARRAY_SIZE(sh7763_devices));
 }
-__initcall(sh7763_devices_setup);
+arch_initcall(sh7763_devices_setup);
 
 static struct platform_device *sh7763_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 1e86209db28..eead08d89d3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -368,7 +368,7 @@ static int __init sh7770_devices_setup(void)
 	return platform_add_devices(sh7770_devices,
 				    ARRAY_SIZE(sh7770_devices));
 }
-__initcall(sh7770_devices_setup);
+arch_initcall(sh7770_devices_setup);
 
 static struct platform_device *sh7770_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 715e05b431e..2c901f44695 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -256,7 +256,7 @@ static int __init sh7780_devices_setup(void)
 	return platform_add_devices(sh7780_devices,
 				    ARRAY_SIZE(sh7780_devices));
 }
-__initcall(sh7780_devices_setup);
+arch_initcall(sh7780_devices_setup);
 
 static struct platform_device *sh7780_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index af561402570..7f6c718b6c3 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -263,7 +263,7 @@ static int __init sh7785_devices_setup(void)
 	return platform_add_devices(sh7785_devices,
 				    ARRAY_SIZE(sh7785_devices));
 }
-__initcall(sh7785_devices_setup);
+arch_initcall(sh7785_devices_setup);
 
 static struct platform_device *sh7785_early_devices[] __initdata = {
 	&tmu0_device,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index b70049470a0..0104a8ec536 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -547,7 +547,7 @@ static int __init sh7786_devices_setup(void)
 	return platform_add_devices(sh7786_devices,
 				    ARRAY_SIZE(sh7786_devices));
 }
-device_initcall(sh7786_devices_setup);
+arch_initcall(sh7786_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 53c65fd9cce..07f078961c7 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -256,7 +256,7 @@ static int __init shx3_devices_setup(void)
 	return platform_add_devices(shx3_devices,
 				    ARRAY_SIZE(shx3_devices));
 }
-__initcall(shx3_devices_setup);
+arch_initcall(shx3_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
index f5ff1ac57fc..6a0f82f7003 100644
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -186,7 +186,7 @@ static int __init sh5_devices_setup(void)
 	return platform_add_devices(sh5_devices,
 				    ARRAY_SIZE(sh5_devices));
 }
-__initcall(sh5_devices_setup);
+arch_initcall(sh5_devices_setup);
 
 void __init plat_early_device_setup(void)
 {
-- 
cgit v1.2.3


From ba3a17019181af5d6ab898760620c4e9916396c2 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 13 Aug 2009 11:39:02 +0900
Subject: sh: fix i2c init order on Migo-R V2

Convert the Migo-R board code to register devices at
arch_initcall() time instead of __initcall(). This fix
unbreaks migor_ts touch screen driver support.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-migor/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index f70f4644deb..f9b2e4df35b 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -608,7 +608,7 @@ static int __init migor_devices_setup(void)
 
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
-__initcall(migor_devices_setup);
+arch_initcall(migor_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int migor_mode_pins(void)
-- 
cgit v1.2.3


From dbefd606a3b3634799b625f4900336e61c89e868 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 7 Aug 2009 03:52:18 +0000
Subject: sh: fix i2c init order on ap325rxa V2

Convert the AP325RXA board code to register devices at
arch_initcall() time instead of device_initcall(). This
fix unbreaks pcf8563 RTC driver support.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7ffd1b4315b..b9c88cc519e 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -547,7 +547,7 @@ static int __init ap325rxa_devices_setup(void)
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
-device_initcall(ap325rxa_devices_setup);
+arch_initcall(ap325rxa_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int ap325rxa_mode_pins(void)
-- 
cgit v1.2.3


From 922b0dc59bb43f7ff3bb8b9558ffeb3ad6af528e Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Sun, 9 Aug 2009 19:53:59 +0000
Subject: sh: use printk_once

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/ioremap_64.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index 828c8597219..b16843d02b7 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -94,7 +94,6 @@ static struct resource *shmedia_find_resource(struct resource *root,
 static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
 				      const char *name, unsigned long flags)
 {
-	static int printed_full;
 	struct xresource *xres;
 	struct resource *res;
 	char *tack;
@@ -108,11 +107,8 @@ static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
 		tack = xres->xname;
 		res = &xres->xres;
 	} else {
-		if (!printed_full) {
-			printk(KERN_NOTICE "%s: done with statics, "
+		printk_once(KERN_NOTICE "%s: done with statics, "
 			       "switching to kmalloc\n", __func__);
-			printed_full = 1;
-		}
 		tlen = strlen(name);
 		tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL);
 		if (!tack)
-- 
cgit v1.2.3


From 4e14dfc722b8e9e07a355f97aa60a3d9f0739071 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Fri, 7 Aug 2009 16:11:19 +0100
Subject: sh: Use the generalized stacktrace ops

Copy the stacktrace ops code from x86 and provide a central function for
use by functions that need to dump a callstack.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/stacktrace.h |  25 ++++++++
 arch/sh/kernel/Makefile_32       |   2 +-
 arch/sh/kernel/dumpstack.c       | 128 +++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/stacktrace.c      |  87 ++++++++++++++++++--------
 arch/sh/kernel/traps_32.c        |  24 --------
 arch/sh/oprofile/backtrace.c     |  56 +++++++++++------
 6 files changed, 251 insertions(+), 71 deletions(-)
 create mode 100644 arch/sh/include/asm/stacktrace.h
 create mode 100644 arch/sh/kernel/dumpstack.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/stacktrace.h b/arch/sh/include/asm/stacktrace.h
new file mode 100644
index 00000000000..79701821371
--- /dev/null
+++ b/arch/sh/include/asm/stacktrace.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based on:
+ *	The x86 implementation - arch/x86/include/asm/stacktrace.h
+ */
+#ifndef _ASM_SH_STACKTRACE_H
+#define _ASM_SH_STACKTRACE_H
+
+/* Generic stack tracer with callbacks */
+
+struct stacktrace_ops {
+	void (*warning)(void *data, char *msg);
+	/* msg must contain %s for the symbol */
+	void (*warning_symbol)(void *data, char *msg, unsigned long symbol);
+	void (*address)(void *data, unsigned long address, int reliable);
+	/* On negative return stop dumping */
+	int (*stack)(void *data, char *name);
+};
+
+void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
+		unsigned long *stack,
+		const struct stacktrace_ops *ops, void *data);
+
+#endif /* _ASM_SH_STACKTRACE_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 94ed99b6800..6b32de701a7 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -9,7 +9,7 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
-obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o			\
+obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
 	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
 	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o	\
 	   traps.o traps_32.o
diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
new file mode 100644
index 00000000000..6ab996fc612
--- /dev/null
+++ b/arch/sh/kernel/dumpstack.c
@@ -0,0 +1,128 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ *  Copyright (C) 2009  Matt Fleming
+ */
+#include <linux/kallsyms.h>
+#include <linux/ftrace.h>
+#include <linux/debug_locks.h>
+
+#include <asm/stacktrace.h>
+
+void printk_address(unsigned long address, int reliable)
+{
+	printk(" [<%p>] %s%pS\n", (void *) address,
+			reliable ? "" : "? ", (void *) address);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{
+	struct task_struct *task = tinfo->task;
+	unsigned long ret_addr;
+	int index = task->curr_ret_stack;
+
+	if (addr != (unsigned long)return_to_handler)
+		return;
+
+	if (!task->ret_stack || index < *graph)
+		return;
+
+	index -= *graph;
+	ret_addr = task->ret_stack[index].ret;
+
+	ops->address(data, ret_addr, 1);
+
+	(*graph)++;
+}
+#else
+static inline void
+print_ftrace_graph_addr(unsigned long addr, void *data,
+			const struct stacktrace_ops *ops,
+			struct thread_info *tinfo, int *graph)
+{ }
+#endif
+
+/*
+ * Unwind the call stack and pass information to the stacktrace_ops
+ * functions.
+ */
+void dump_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, const struct stacktrace_ops *ops,
+		void *data)
+{
+	struct thread_info *context;
+	int graph = 0;
+
+	context = (struct thread_info *)
+		((unsigned long)sp & (~(THREAD_SIZE - 1)));
+
+	while (!kstack_end(sp)) {
+		unsigned long addr = *sp++;
+
+		if (__kernel_text_address(addr)) {
+			ops->address(data, addr, 0);
+
+			print_ftrace_graph_addr(addr, data, ops,
+						context, &graph);
+		}
+	}
+}
+EXPORT_SYMBOL(dump_trace);
+
+
+static void
+print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+	printk(data);
+	print_symbol(msg, symbol);
+	printk("\n");
+}
+
+static void print_trace_warning(void *data, char *msg)
+{
+	printk("%s%s\n", (char *)data, msg);
+}
+
+static int print_trace_stack(void *data, char *name)
+{
+	printk("%s <%s> ", (char *)data, name);
+	return 0;
+}
+
+/*
+ * Print one address/symbol entries per line.
+ */
+static void print_trace_address(void *data, unsigned long addr, int reliable)
+{
+	printk(data);
+	printk_address(addr, reliable);
+}
+
+static const struct stacktrace_ops print_trace_ops = {
+	.warning = print_trace_warning,
+	.warning_symbol = print_trace_warning_symbol,
+	.stack = print_trace_stack,
+	.address = print_trace_address,
+};
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs)
+{
+	if (regs && user_mode(regs))
+		return;
+
+	printk("\nCall trace:\n");
+
+	dump_trace(tsk, regs, sp, &print_trace_ops, "");
+
+	printk("\n");
+
+	if (!tsk)
+		tsk = current;
+
+	debug_show_held_locks(tsk);
+}
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 1a2a5eb76e4..6c24a400b05 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -14,46 +14,81 @@
 #include <linux/thread_info.h>
 #include <linux/module.h>
 #include <asm/ptrace.h>
+#include <asm/stacktrace.h>
+
+static void save_stack_warning(void *data, char *msg)
+{
+}
+
+static void
+save_stack_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+}
+
+static int save_stack_stack(void *data, char *name)
+{
+	return 0;
+}
 
 /*
  * Save stack-backtrace addresses into a stack_trace buffer.
  */
+static void save_stack_address(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = data;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops = {
+	.warning = save_stack_warning,
+	.warning_symbol = save_stack_warning_symbol,
+	.stack = save_stack_stack,
+	.address = save_stack_address,
+};
+
 void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)current_stack_pointer;
 
-	while (!kstack_end(sp)) {
-		unsigned long addr = *sp++;
-
-		if (__kernel_text_address(addr)) {
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	dump_trace(current, NULL, sp,  &save_stack_ops, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
+static void
+save_stack_address_nosched(void *data, unsigned long addr, int reliable)
+{
+	struct stack_trace *trace = (struct stack_trace *)data;
+
+	if (in_sched_functions(addr))
+		return;
+
+	if (trace->skip > 0) {
+		trace->skip--;
+		return;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = addr;
+}
+
+static const struct stacktrace_ops save_stack_ops_nosched = {
+	.warning = save_stack_warning,
+	.warning_symbol = save_stack_warning_symbol,
+	.stack = save_stack_stack,
+	.address = save_stack_address_nosched,
+};
+
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)tsk->thread.sp;
 
-	while (!kstack_end(sp)) {
-		unsigned long addr = *sp++;
-
-		if (__kernel_text_address(addr)) {
-			if (in_sched_functions(addr))
-				break;
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	dump_trace(current, NULL, sp,  &save_stack_ops_nosched, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 2b772776fcd..563426487c6 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -858,30 +858,6 @@ void __init trap_init(void)
 	per_cpu_trap_init();
 }
 
-void show_trace(struct task_struct *tsk, unsigned long *sp,
-		struct pt_regs *regs)
-{
-	unsigned long addr;
-
-	if (regs && user_mode(regs))
-		return;
-
-	printk("\nCall trace:\n");
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
-	}
-
-	printk("\n");
-
-	if (!tsk)
-		tsk = current;
-
-	debug_show_held_locks(tsk);
-}
-
 void show_stack(struct task_struct *tsk, unsigned long *sp)
 {
 	unsigned long stack;
diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
index 9499a2914f8..62e4e4d0273 100644
--- a/arch/sh/oprofile/backtrace.c
+++ b/arch/sh/oprofile/backtrace.c
@@ -20,6 +20,39 @@
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/sections.h>
+#include <asm/stacktrace.h>
+
+static void backtrace_warning_symbol(void *data, char *msg,
+				     unsigned long symbol)
+{
+	/* Ignore warnings */
+}
+
+static void backtrace_warning(void *data, char *msg)
+{
+	/* Ignore warnings */
+}
+
+static int backtrace_stack(void *data, char *name)
+{
+	/* Yes, we want all stacks */
+	return 0;
+}
+
+static void backtrace_address(void *data, unsigned long addr, int reliable)
+{
+	unsigned int *depth = data;
+
+	if ((*depth)--)
+		oprofile_add_trace(addr);
+}
+
+static struct stacktrace_ops backtrace_ops = {
+	.warning = backtrace_warning,
+	.warning_symbol = backtrace_warning_symbol,
+	.stack = backtrace_stack,
+	.address = backtrace_address,
+};
 
 /* Limit to stop backtracing too far. */
 static int backtrace_limit = 20;
@@ -74,23 +107,6 @@ static int valid_kernel_stack(unsigned long *stackaddr, struct pt_regs *regs)
 	return ((unsigned long)stackaddr > stack) && ((unsigned long)stackaddr < stack_base);
 }
 
-static unsigned long *
-kernel_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
-{
-	unsigned long addr;
-
-	/*
-	 * If not a valid kernel address, keep going till we find one
-	 * or the SP stops being a valid address.
-	 */
-	do {
-		addr = *stackaddr++;
-		oprofile_add_trace(addr);
-	} while (valid_kernel_stack(stackaddr, regs));
-
-	return stackaddr;
-}
-
 void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	unsigned long *stackaddr;
@@ -103,9 +119,9 @@ void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 
 	stackaddr = (unsigned long *)regs->regs[15];
 	if (!user_mode(regs)) {
-		while (depth-- && valid_kernel_stack(stackaddr, regs))
-			stackaddr = kernel_backtrace(stackaddr, regs);
-
+		if (depth)
+			dump_trace(NULL, regs, stackaddr,
+				   &backtrace_ops, &depth);
 		return;
 	}
 
-- 
cgit v1.2.3


From bf61ad1f870be88676a07bfef69acd59ce10172e Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 13 Aug 2009 19:49:03 +0900
Subject: sh: Allow multiple stack unwinders to be setup

Provide an interface for registering stack unwinders, where each
unwinder is given a rating that describes its accuracy and
complexity. The more accurate an unwinder is, the more complex it is.

If a the current stack unwinder faults, then the stack unwinder with the
next highest accuracy will be used in its place (provided one is
available). For example, this allows unwinders, such as the DWARF
unwinder, to liberally sprinkle BUG()s to catch badly formed DWARF debug
info.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/unwinder.h |  25 +++++++
 arch/sh/kernel/Makefile_32     |   4 +-
 arch/sh/kernel/Makefile_64     |   2 +-
 arch/sh/kernel/unwinder.c      | 162 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 190 insertions(+), 3 deletions(-)
 create mode 100644 arch/sh/include/asm/unwinder.h
 create mode 100644 arch/sh/kernel/unwinder.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/unwinder.h b/arch/sh/include/asm/unwinder.h
new file mode 100644
index 00000000000..3dc551453e2
--- /dev/null
+++ b/arch/sh/include/asm/unwinder.h
@@ -0,0 +1,25 @@
+#ifndef _LINUX_UNWINDER_H
+#define _LINUX_UNWINDER_H
+
+#include <asm/stacktrace.h>
+
+struct unwinder {
+	const char *name;
+	struct list_head list;
+	int rating;
+	void (*dump)(struct task_struct *, struct pt_regs *,
+		     unsigned long *, const struct stacktrace_ops *, void *);
+};
+
+extern int unwinder_init(void);
+extern int unwinder_register(struct unwinder *);
+
+extern void unwind_stack(struct task_struct *, struct pt_regs *,
+			 unsigned long *, const struct stacktrace_ops *,
+			 void *);
+
+extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
+			      unsigned long *, const struct stacktrace_ops *,
+			      void *);
+
+#endif /* _LINUX_UNWINDER_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 6b32de701a7..37a3b7704fc 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -11,8 +11,8 @@ endif
 
 obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
 	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
-	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o	\
-	   traps.o traps_32.o
+	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o		\
+	   traps.o traps_32.o unwinder.o
 
 obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index 67b9f6c6326..00b73e7598c 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -2,7 +2,7 @@ extra-y	:= head_64.o init_task.o vmlinux.lds
 
 obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
 	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
-	   syscalls_64.o time.o topology.o traps.o traps_64.o
+	   syscalls_64.o time.o topology.o traps.o traps_64.o unwinder.o
 
 obj-y				+= cpu/
 obj-$(CONFIG_SMP)		+= smp.o
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
new file mode 100644
index 00000000000..2b30fa28b44
--- /dev/null
+++ b/arch/sh/kernel/unwinder.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009  Matt Fleming
+ *
+ * Based, in part, on kernel/time/clocksource.c.
+ *
+ * This file provides arbitration code for stack unwinders.
+ *
+ * Multiple stack unwinders can be available on a system, usually with
+ * the most accurate unwinder being the currently active one.
+ */
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/unwinder.h>
+#include <asm/atomic.h>
+
+/*
+ * This is the most basic stack unwinder an architecture can
+ * provide. For architectures without reliable frame pointers, e.g.
+ * RISC CPUs, it can be implemented by looking through the stack for
+ * addresses that lie within the kernel text section.
+ *
+ * Other CPUs, e.g. x86, can use their frame pointer register to
+ * construct more accurate stack traces.
+ */
+static struct list_head unwinder_list;
+static struct unwinder stack_reader = {
+	.name = "stack-reader",
+	.dump = stack_reader_dump,
+	.rating = 50,
+	.list = {
+		.next = &unwinder_list,
+		.prev = &unwinder_list,
+	},
+};
+
+/*
+ * "curr_unwinder" points to the stack unwinder currently in use. This
+ * is the unwinder with the highest rating.
+ *
+ * "unwinder_list" is a linked-list of all available unwinders, sorted
+ * by rating.
+ *
+ * All modifications of "curr_unwinder" and "unwinder_list" must be
+ * performed whilst holding "unwinder_lock".
+ */
+static struct unwinder *curr_unwinder = &stack_reader;
+
+static struct list_head unwinder_list = {
+	.next = &stack_reader.list,
+	.prev = &stack_reader.list,
+};
+
+static DEFINE_SPINLOCK(unwinder_lock);
+
+static atomic_t unwinder_running = ATOMIC_INIT(0);
+
+/**
+ * select_unwinder - Select the best registered stack unwinder.
+ *
+ * Private function. Must hold unwinder_lock when called.
+ *
+ * Select the stack unwinder with the best rating. This is useful for
+ * setting up curr_unwinder.
+ */
+static struct unwinder *select_unwinder(void)
+{
+	struct unwinder *best;
+
+	if (list_empty(&unwinder_list))
+		return NULL;
+
+	best = list_entry(unwinder_list.next, struct unwinder, list);
+	if (best == curr_unwinder)
+		return NULL;
+
+	return best;
+}
+
+/*
+ * Enqueue the stack unwinder sorted by rating.
+ */
+static int unwinder_enqueue(struct unwinder *ops)
+{
+	struct list_head *tmp, *entry = &unwinder_list;
+
+	list_for_each(tmp, &unwinder_list) {
+		struct unwinder *o;
+
+		o = list_entry(tmp, struct unwinder, list);
+		if (o == ops)
+			return -EBUSY;
+		/* Keep track of the place, where to insert */
+		if (o->rating >= ops->rating)
+			entry = tmp;
+	}
+	list_add(&ops->list, entry);
+
+	return 0;
+}
+
+/**
+ * unwinder_register - Used to install new stack unwinder
+ * @u: unwinder to be registered
+ *
+ * Install the new stack unwinder on the unwinder list, which is sorted
+ * by rating.
+ *
+ * Returns -EBUSY if registration fails, zero otherwise.
+ */
+int unwinder_register(struct unwinder *u)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&unwinder_lock, flags);
+	ret = unwinder_enqueue(u);
+	if (!ret)
+		curr_unwinder = select_unwinder();
+	spin_unlock_irqrestore(&unwinder_lock, flags);
+
+	return ret;
+}
+
+/*
+ * Unwind the call stack and pass information to the stacktrace_ops
+ * functions. Also handle the case where we need to switch to a new
+ * stack dumper because the current one faulted unexpectedly.
+ */
+void unwind_stack(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
+{
+	unsigned long flags;
+
+	/*
+	 * The problem with unwinders with high ratings is that they are
+	 * inherently more complicated than the simple ones with lower
+	 * ratings. We are therefore more likely to fault in the
+	 * complicated ones, e.g. hitting BUG()s. If we fault in the
+	 * code for the current stack unwinder we try to downgrade to
+	 * one with a lower rating.
+	 *
+	 * Hopefully this will give us a semi-reliable stacktrace so we
+	 * can diagnose why curr_unwinder->dump() faulted.
+	 */
+	if (atomic_inc_return(&unwinder_running) != 1) {
+		spin_lock_irqsave(&unwinder_lock, flags);
+
+		if (!list_is_singular(&unwinder_list)) {
+			list_del(&curr_unwinder->list);
+			curr_unwinder = select_unwinder();
+		}
+
+		spin_unlock_irqrestore(&unwinder_lock, flags);
+		atomic_dec(&unwinder_running);
+	}
+
+	curr_unwinder->dump(task, regs, sp, ops, data);
+
+	atomic_dec(&unwinder_running);
+}
-- 
cgit v1.2.3


From 0eff9f66de79a0707a9c3a2f8528ccfd62100f0b Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 11 Aug 2009 22:43:20 +0100
Subject: sh: Use the new stack unwinder API

Instead of implementing our own stack unwinder via dump_trace() we
should use the new stack unwinder API because it is more modular. This
change allows us to decouple the interface for generating stacktraces
from the implementation of a stack unwinder.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dumpstack.c   | 17 ++++++-----------
 arch/sh/kernel/stacktrace.c  |  5 +++--
 arch/sh/oprofile/backtrace.c |  5 +++--
 3 files changed, 12 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
index 6ab996fc612..005dc1d1146 100644
--- a/arch/sh/kernel/dumpstack.c
+++ b/arch/sh/kernel/dumpstack.c
@@ -6,7 +6,7 @@
 #include <linux/kallsyms.h>
 #include <linux/ftrace.h>
 #include <linux/debug_locks.h>
-
+#include <asm/unwinder.h>
 #include <asm/stacktrace.h>
 
 void printk_address(unsigned long address, int reliable)
@@ -46,13 +46,10 @@ print_ftrace_graph_addr(unsigned long addr, void *data,
 { }
 #endif
 
-/*
- * Unwind the call stack and pass information to the stacktrace_ops
- * functions.
- */
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, const struct stacktrace_ops *ops,
-		void *data)
+void
+stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
+		  unsigned long *sp, const struct stacktrace_ops *ops,
+		  void *data)
 {
 	struct thread_info *context;
 	int graph = 0;
@@ -71,8 +68,6 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		}
 	}
 }
-EXPORT_SYMBOL(dump_trace);
-
 
 static void
 print_trace_warning_symbol(void *data, char *msg, unsigned long symbol)
@@ -117,7 +112,7 @@ void show_trace(struct task_struct *tsk, unsigned long *sp,
 
 	printk("\nCall trace:\n");
 
-	dump_trace(tsk, regs, sp, &print_trace_ops, "");
+	unwind_stack(tsk, regs, sp, &print_trace_ops, "");
 
 	printk("\n");
 
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 6c24a400b05..45b1adde3ab 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -13,6 +13,7 @@
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>
+#include <asm/unwinder.h>
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
 
@@ -57,7 +58,7 @@ void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)current_stack_pointer;
 
-	dump_trace(current, NULL, sp,  &save_stack_ops, trace);
+	unwind_stack(current, NULL, sp,  &save_stack_ops, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
@@ -89,6 +90,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	unsigned long *sp = (unsigned long *)tsk->thread.sp;
 
-	dump_trace(current, NULL, sp,  &save_stack_ops_nosched, trace);
+	unwind_stack(current, NULL, sp,  &save_stack_ops_nosched, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
index 62e4e4d0273..37cd75d7930 100644
--- a/arch/sh/oprofile/backtrace.c
+++ b/arch/sh/oprofile/backtrace.c
@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <linux/kallsyms.h>
 #include <linux/mm.h>
+#include <asm/unwinder.h>
 #include <asm/ptrace.h>
 #include <asm/uaccess.h>
 #include <asm/sections.h>
@@ -120,8 +121,8 @@ void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 	stackaddr = (unsigned long *)regs->regs[15];
 	if (!user_mode(regs)) {
 		if (depth)
-			dump_trace(NULL, regs, stackaddr,
-				   &backtrace_ops, &depth);
+			unwind_stack(NULL, regs, stackaddr,
+				     &backtrace_ops, &depth);
 		return;
 	}
 
-- 
cgit v1.2.3


From bd353861c735b2265c9d8b2559960c693e7c68ab Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Fri, 14 Aug 2009 01:58:43 +0900
Subject: sh: dwarf unwinder support.

This is a first cut at a generic DWARF unwinder for the kernel. It's
still lacking DWARF64 support and the DWARF expression support hasn't
been tested very well but it is generating proper stacktraces on SH for
WARN_ON() and NULL dereferences.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig.debug             |   8 +
 arch/sh/Makefile                  |   4 +
 arch/sh/include/asm/dwarf.h       | 407 ++++++++++++++++++
 arch/sh/include/asm/sections.h    |   1 +
 arch/sh/include/asm/vmlinux.lds.h |  17 +
 arch/sh/kernel/Makefile_32        |   1 +
 arch/sh/kernel/Makefile_64        |   1 +
 arch/sh/kernel/dwarf.c            | 876 ++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/irq.c              |   4 +
 arch/sh/kernel/vmlinux.lds.S      |   4 +-
 10 files changed, 1322 insertions(+), 1 deletion(-)
 create mode 100644 arch/sh/include/asm/dwarf.h
 create mode 100644 arch/sh/include/asm/vmlinux.lds.h
 create mode 100644 arch/sh/kernel/dwarf.c

(limited to 'arch')

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 763b792b161..741d20fab2e 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -110,6 +110,14 @@ config DUMP_CODE
 
 	  Those looking for more verbose debugging output should say Y.
 
+config DWARF_UNWINDER
+	bool "Enable the DWARF unwinder for stacktraces"
+	select FRAME_POINTER
+	default n
+	help
+	  Enabling this option will make stacktraces more accurate, at
+	  the cost of an increase in overall kernel size.
+
 config SH_NO_BSS_INIT
 	bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)"
 	depends on DEBUG_KERNEL
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index b6ff337fd85..e26421bf997 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -191,6 +191,10 @@ ifeq ($(CONFIG_MCOUNT),y)
   KBUILD_CFLAGS += -pg
 endif
 
+ifeq ($(CONFIG_DWARF_UNWINDER),y)
+  KBUILD_CFLAGS += -fasynchronous-unwind-tables
+endif
+
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
new file mode 100644
index 00000000000..23eba12880b
--- /dev/null
+++ b/arch/sh/include/asm/dwarf.h
@@ -0,0 +1,407 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_SH_DWARF_H
+#define __ASM_SH_DWARF_H
+
+#ifdef CONFIG_DWARF_UNWINDER
+
+/*
+ * DWARF expression operations
+ */
+#define DW_OP_addr	0x03
+#define DW_OP_deref	0x06
+#define DW_OP_const1u	0x08
+#define DW_OP_const1s	0x09
+#define DW_OP_const2u	0x0a
+#define DW_OP_const2s	0x0b
+#define DW_OP_const4u	0x0c
+#define DW_OP_const4s	0x0d
+#define DW_OP_const8u	0x0e
+#define DW_OP_const8s	0x0f
+#define DW_OP_constu	0x10
+#define DW_OP_consts	0x11
+#define DW_OP_dup	0x12
+#define DW_OP_drop	0x13
+#define DW_OP_over	0x14
+#define DW_OP_pick	0x15
+#define DW_OP_swap	0x16
+#define DW_OP_rot	0x17
+#define DW_OP_xderef	0x18
+#define DW_OP_abs	0x19
+#define DW_OP_and	0x1a
+#define DW_OP_div	0x1b
+#define DW_OP_minus	0x1c
+#define DW_OP_mod	0x1d
+#define DW_OP_mul	0x1e
+#define DW_OP_neg	0x1f
+#define DW_OP_not	0x20
+#define DW_OP_or	0x21
+#define DW_OP_plus	0x22
+#define DW_OP_plus_uconst	0x23
+#define DW_OP_shl	0x24
+#define DW_OP_shr	0x25
+#define DW_OP_shra	0x26
+#define DW_OP_xor	0x27
+#define DW_OP_skip	0x2f
+#define DW_OP_bra	0x28
+#define DW_OP_eq	0x29
+#define DW_OP_ge	0x2a
+#define DW_OP_gt	0x2b
+#define DW_OP_le	0x2c
+#define DW_OP_lt	0x2d
+#define DW_OP_ne	0x2e
+#define DW_OP_lit0	0x30
+#define DW_OP_lit1	0x31
+#define DW_OP_lit2	0x32
+#define DW_OP_lit3	0x33
+#define DW_OP_lit4	0x34
+#define DW_OP_lit5	0x35
+#define DW_OP_lit6	0x36
+#define DW_OP_lit7	0x37
+#define DW_OP_lit8	0x38
+#define DW_OP_lit9	0x39
+#define DW_OP_lit10	0x3a
+#define DW_OP_lit11	0x3b
+#define DW_OP_lit12	0x3c
+#define DW_OP_lit13	0x3d
+#define DW_OP_lit14	0x3e
+#define DW_OP_lit15	0x3f
+#define DW_OP_lit16	0x40
+#define DW_OP_lit17	0x41
+#define DW_OP_lit18	0x42
+#define DW_OP_lit19	0x43
+#define DW_OP_lit20	0x44
+#define DW_OP_lit21	0x45
+#define DW_OP_lit22	0x46
+#define DW_OP_lit23	0x47
+#define DW_OP_lit24	0x48
+#define DW_OP_lit25	0x49
+#define DW_OP_lit26	0x4a
+#define DW_OP_lit27	0x4b
+#define DW_OP_lit28	0x4c
+#define DW_OP_lit29	0x4d
+#define DW_OP_lit30	0x4e
+#define DW_OP_lit31	0x4f
+#define DW_OP_reg0	0x50
+#define DW_OP_reg1	0x51
+#define DW_OP_reg2	0x52
+#define DW_OP_reg3	0x53
+#define DW_OP_reg4	0x54
+#define DW_OP_reg5	0x55
+#define DW_OP_reg6	0x56
+#define DW_OP_reg7	0x57
+#define DW_OP_reg8	0x58
+#define DW_OP_reg9	0x59
+#define DW_OP_reg10	0x5a
+#define DW_OP_reg11	0x5b
+#define DW_OP_reg12	0x5c
+#define DW_OP_reg13	0x5d
+#define DW_OP_reg14	0x5e
+#define DW_OP_reg15	0x5f
+#define DW_OP_reg16	0x60
+#define DW_OP_reg17	0x61
+#define DW_OP_reg18	0x62
+#define DW_OP_reg19	0x63
+#define DW_OP_reg20	0x64
+#define DW_OP_reg21	0x65
+#define DW_OP_reg22	0x66
+#define DW_OP_reg23	0x67
+#define DW_OP_reg24	0x68
+#define DW_OP_reg25	0x69
+#define DW_OP_reg26	0x6a
+#define DW_OP_reg27	0x6b
+#define DW_OP_reg28	0x6c
+#define DW_OP_reg29	0x6d
+#define DW_OP_reg30	0x6e
+#define DW_OP_reg31	0x6f
+#define DW_OP_breg0	0x70
+#define DW_OP_breg1	0x71
+#define DW_OP_breg2	0x72
+#define DW_OP_breg3	0x73
+#define DW_OP_breg4	0x74
+#define DW_OP_breg5	0x75
+#define DW_OP_breg6	0x76
+#define DW_OP_breg7	0x77
+#define DW_OP_breg8	0x78
+#define DW_OP_breg9	0x79
+#define DW_OP_breg10	0x7a
+#define DW_OP_breg11	0x7b
+#define DW_OP_breg12	0x7c
+#define DW_OP_breg13	0x7d
+#define DW_OP_breg14	0x7e
+#define DW_OP_breg15	0x7f
+#define DW_OP_breg16	0x80
+#define DW_OP_breg17	0x81
+#define DW_OP_breg18	0x82
+#define DW_OP_breg19	0x83
+#define DW_OP_breg20	0x84
+#define DW_OP_breg21	0x85
+#define DW_OP_breg22	0x86
+#define DW_OP_breg23	0x87
+#define DW_OP_breg24	0x88
+#define DW_OP_breg25	0x89
+#define DW_OP_breg26	0x8a
+#define DW_OP_breg27	0x8b
+#define DW_OP_breg28	0x8c
+#define DW_OP_breg29	0x8d
+#define DW_OP_breg30	0x8e
+#define DW_OP_breg31	0x8f
+#define DW_OP_regx	0x90
+#define DW_OP_fbreg	0x91
+#define DW_OP_bregx	0x92
+#define DW_OP_piece	0x93
+#define DW_OP_deref_size	0x94
+#define DW_OP_xderef_size	0x95
+#define DW_OP_nop	0x96
+#define DW_OP_push_object_address	0x97
+#define DW_OP_call2	0x98
+#define DW_OP_call4	0x99
+#define DW_OP_call_ref	0x9a
+#define DW_OP_form_tls_address	0x9b
+#define DW_OP_call_frame_cfa	0x9c
+#define DW_OP_bit_piece	0x9d
+#define DW_OP_lo_user	0xe0
+#define DW_OP_hi_user	0xff
+
+/*
+ * Addresses used in FDE entries in the .eh_frame section may be encoded
+ * using one of the following encodings.
+ */
+#define DW_EH_PE_absptr	0x00
+#define DW_EH_PE_omit	0xff
+#define DW_EH_PE_uleb128	0x01
+#define DW_EH_PE_udata2	0x02
+#define DW_EH_PE_udata4	0x03
+#define DW_EH_PE_udata8	0x04
+#define DW_EH_PE_sleb128	0x09
+#define DW_EH_PE_sdata2	0x0a
+#define DW_EH_PE_sdata4	0x0b
+#define DW_EH_PE_sdata8	0x0c
+#define DW_EH_PE_signed	0x09
+
+#define DW_EH_PE_pcrel	0x10
+
+/*
+ * The architecture-specific register number that contains the return
+ * address in the .debug_frame table.
+ */
+#define DWARF_ARCH_RA_REG	17
+
+/*
+ * At what offset into dwarf_unwind_stack() is DWARF_ARCH_RA_REG setup?
+ */
+#define DWARF_ARCH_UNWIND_OFFSET	0x20
+
+#ifndef __ASSEMBLY__
+/*
+ * Read either the frame pointer (r14) or the stack pointer (r15).
+ * NOTE: this MUST be inlined.
+ */
+static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
+{
+	unsigned long value;
+
+	switch (reg) {
+	case 14:
+		__asm__ __volatile__("mov r14, %0\n" : "=r" (value));
+		break;
+	case 15:
+		__asm__ __volatile__("mov r15, %0\n" : "=r" (value));
+		break;
+	default:
+		BUG();
+	}
+
+	return value;
+}
+
+/**
+ *	dwarf_cie - Common Information Entry
+ */
+struct dwarf_cie {
+	unsigned long length;
+	unsigned long cie_id;
+	unsigned char version;
+	const char *augmentation;
+	unsigned int code_alignment_factor;
+	int data_alignment_factor;
+
+	/* Which column in the rule table represents return addr of func. */
+	unsigned int return_address_reg;
+
+	unsigned char *initial_instructions;
+	unsigned char *instructions_end;
+
+	unsigned char encoding;
+
+	unsigned long cie_pointer;
+
+	struct list_head link;
+
+	unsigned long flags;
+#define DWARF_CIE_Z_AUGMENTATION	(1 << 0)
+};
+
+/**
+ *	dwarf_fde - Frame Description Entry
+ */
+struct dwarf_fde {
+	unsigned long length;
+	unsigned long cie_pointer;
+	struct dwarf_cie *cie;
+	unsigned long initial_location;
+	unsigned long address_range;
+	unsigned char *instructions;
+	unsigned char *end;
+	struct list_head link;
+};
+
+/**
+ *	dwarf_frame - DWARF information for a frame in the call stack
+ */
+struct dwarf_frame {
+	struct dwarf_frame *prev, *next;
+
+	unsigned long pc;
+
+	struct dwarf_reg *regs;
+	unsigned int num_regs;	/* how many regs are allocated? */
+
+	unsigned int depth;	/* what level are we in the callstack? */
+
+	unsigned long cfa;
+
+	/* Valid when DW_FRAME_CFA_REG_OFFSET is set in flags */
+	unsigned int cfa_register;
+	unsigned int cfa_offset;
+
+	/* Valid when DW_FRAME_CFA_REG_EXP is set in flags */
+	unsigned char *cfa_expr;
+	unsigned int cfa_expr_len;
+
+	unsigned long flags;
+#define DWARF_FRAME_CFA_REG_OFFSET	(1 << 0)
+#define DWARF_FRAME_CFA_REG_EXP		(1 << 1)
+
+	unsigned long return_addr;
+};
+
+/**
+ *	dwarf_reg - DWARF register
+ *	@flags: Describes how to calculate the value of this register
+ */
+struct dwarf_reg {
+	unsigned long addr;
+	unsigned long flags;
+#define DWARF_REG_OFFSET	(1 << 0)
+};
+
+/**
+ *	dwarf_stack - a DWARF stack contains a collection of DWARF frames
+ *	@depth: the number of frames in the stack
+ *	@level: an array of DWARF frames, indexed by stack level
+ *
+ */
+struct dwarf_stack {
+	unsigned int depth;
+	struct dwarf_frame **level;
+};
+
+/*
+ * Call Frame instruction opcodes.
+ */
+#define DW_CFA_advance_loc	0x40
+#define DW_CFA_offset		0x80
+#define DW_CFA_restore		0xc0
+#define DW_CFA_nop		0x00
+#define DW_CFA_set_loc		0x01
+#define DW_CFA_advance_loc1	0x02
+#define DW_CFA_advance_loc2	0x03
+#define DW_CFA_advance_loc4	0x04
+#define DW_CFA_offset_extended	0x05
+#define DW_CFA_restore_extended	0x06
+#define DW_CFA_undefined	0x07
+#define DW_CFA_same_value	0x08
+#define DW_CFA_register		0x09
+#define DW_CFA_remember_state	0x0a
+#define DW_CFA_restore_state	0x0b
+#define DW_CFA_def_cfa		0x0c
+#define DW_CFA_def_cfa_register	0x0d
+#define DW_CFA_def_cfa_offset	0x0e
+#define DW_CFA_def_cfa_expression	0x0f
+#define DW_CFA_expression	0x10
+#define DW_CFA_offset_extended_sf	0x11
+#define DW_CFA_def_cfa_sf	0x12
+#define DW_CFA_def_cfa_offset_sf	0x13
+#define DW_CFA_val_offset	0x14
+#define DW_CFA_val_offset_sf	0x15
+#define DW_CFA_val_expression	0x16
+#define DW_CFA_lo_user		0x1c
+#define DW_CFA_hi_user		0x3f
+
+/*
+ * Some call frame instructions encode their operands in the opcode. We
+ * need some helper functions to extract both the opcode and operands
+ * from an instruction.
+ */
+static inline unsigned int DW_CFA_opcode(unsigned long insn)
+{
+	return (insn & 0xc0);
+}
+
+static inline unsigned int DW_CFA_operand(unsigned long insn)
+{
+	return (insn & 0x3f);
+}
+
+#define DW_EH_FRAME_CIE	0		/* .eh_frame CIE IDs are 0 */
+#define DW_CIE_ID	0xffffffff
+#define DW64_CIE_ID	0xffffffffffffffffULL
+
+/*
+ * DWARF FDE/CIE length field values.
+ */
+#define DW_EXT_LO	0xfffffff0
+#define DW_EXT_HI	0xffffffff
+#define DW_EXT_DWARF64	DW_EXT_HI
+
+extern void dwarf_unwinder_init(void);
+
+extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
+					      struct dwarf_frame *);
+#endif /* __ASSEMBLY__ */
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+
+#else
+
+/*
+ * Use the asm comment character to ignore the rest of the line.
+ */
+#define CFI_IGNORE	!
+
+#define CFI_STARTPROC	CFI_IGNORE
+#define CFI_ENDPROC	CFI_IGNORE
+#define CFI_DEF_CFA	CFI_IGNORE
+#define CFI_REGISTER	CFI_IGNORE
+#define CFI_REL_OFFSET	CFI_IGNORE
+
+#ifndef __ASSEMBLY__
+static inline void dwarf_unwinder_init(void)
+{
+}
+#endif
+
+#endif /* CONFIG_DWARF_UNWINDER */
+
+#endif /* __ASM_SH_DWARF_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
index 01a4076a371..a78701da775 100644
--- a/arch/sh/include/asm/sections.h
+++ b/arch/sh/include/asm/sections.h
@@ -7,6 +7,7 @@ extern void __nosave_begin, __nosave_end;
 extern long __machvec_start, __machvec_end;
 extern char __uncached_start, __uncached_end;
 extern char _ebss[];
+extern char __start_eh_frame[], __stop_eh_frame[];
 
 #endif /* __ASM_SH_SECTIONS_H */
 
diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h
new file mode 100644
index 00000000000..244ec4ad9a7
--- /dev/null
+++ b/arch/sh/include/asm/vmlinux.lds.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_VMLINUX_LDS_H
+#define __ASM_SH_VMLINUX_LDS_H
+
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+#define DWARF_EH_FRAME							\
+	.eh_frame : AT(ADDR(.eh_frame) - LOAD_OFFSET) {			\
+		  VMLINUX_SYMBOL(__start_eh_frame) = .;			\
+		  *(.eh_frame)						\
+		  VMLINUX_SYMBOL(__stop_eh_frame) = .;			\
+	}
+#else
+#define DWARF_EH_FRAME
+#endif
+
+#endif /* __ASM_SH_VMLINUX_LDS_H */
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 37a3b7704fc..f2245ebf0b3 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -33,6 +33,7 @@ obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
+obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index 00b73e7598c..639ee514266 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -13,6 +13,7 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
new file mode 100644
index 00000000000..09c6fd7fd05
--- /dev/null
+++ b/arch/sh/kernel/dwarf.c
@@ -0,0 +1,876 @@
+/*
+ * Copyright (C) 2009 Matt Fleming <matt@console-pimps.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This is an implementation of a DWARF unwinder. Its main purpose is
+ * for generating stacktrace information. Based on the DWARF 3
+ * specification from http://www.dwarfstd.org.
+ *
+ * TODO:
+ *	- DWARF64 doesn't work.
+ */
+
+/* #define DEBUG */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <asm/dwarf.h>
+#include <asm/unwinder.h>
+#include <asm/sections.h>
+#include <asm-generic/unaligned.h>
+#include <asm/dwarf.h>
+#include <asm/stacktrace.h>
+
+static LIST_HEAD(dwarf_cie_list);
+DEFINE_SPINLOCK(dwarf_cie_lock);
+
+static LIST_HEAD(dwarf_fde_list);
+DEFINE_SPINLOCK(dwarf_fde_lock);
+
+static struct dwarf_cie *cached_cie;
+
+/*
+ * Figure out whether we need to allocate some dwarf registers. If dwarf
+ * registers have already been allocated then we may need to realloc
+ * them. "reg" is a register number that we need to be able to access
+ * after this call.
+ *
+ * Register numbers start at zero, therefore we need to allocate space
+ * for "reg" + 1 registers.
+ */
+static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
+				   unsigned int reg)
+{
+	struct dwarf_reg *regs;
+	unsigned int num_regs = reg + 1;
+	size_t new_size;
+	size_t old_size;
+
+	new_size = num_regs * sizeof(*regs);
+	old_size = frame->num_regs * sizeof(*regs);
+
+	/* Fast path: don't allocate any regs if we've already got enough. */
+	if (frame->num_regs >= num_regs)
+		return;
+
+	regs = kzalloc(new_size, GFP_KERNEL);
+	if (!regs) {
+		printk(KERN_WARNING "Unable to allocate DWARF registers\n");
+		/*
+		 * Let's just bomb hard here, we have no way to
+		 * gracefully recover.
+		 */
+		BUG();
+	}
+
+	if (frame->regs) {
+		memcpy(regs, frame->regs, old_size);
+		kfree(frame->regs);
+	}
+
+	frame->regs = regs;
+	frame->num_regs = num_regs;
+}
+
+/**
+ *	dwarf_read_addr - read dwarf data
+ *	@src: source address of data
+ *	@dst: destination address to store the data to
+ *
+ *	Read 'n' bytes from @src, where 'n' is the size of an address on
+ *	the native machine. We return the number of bytes read, which
+ *	should always be 'n'. We also have to be careful when reading
+ *	from @src and writing to @dst, because they can be arbitrarily
+ *	aligned. Return 'n' - the number of bytes read.
+ */
+static inline int dwarf_read_addr(void *src, void *dst)
+{
+	u32 val = __get_unaligned_cpu32(src);
+	__put_unaligned_cpu32(val, dst);
+
+	return sizeof(unsigned long *);
+}
+
+/**
+ *	dwarf_read_uleb128 - read unsigned LEB128 data
+ *	@addr: the address where the ULEB128 data is stored
+ *	@ret: address to store the result
+ *
+ *	Decode an unsigned LEB128 encoded datum. The algorithm is taken
+ *	from Appendix C of the DWARF 3 spec. For information on the
+ *	encodings refer to section "7.6 - Variable Length Data". Return
+ *	the number of bytes read.
+ */
+static inline unsigned long dwarf_read_uleb128(char *addr, unsigned int *ret)
+{
+	unsigned int result;
+	unsigned char byte;
+	int shift, count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		count++;
+
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_leb128 - read signed LEB128 data
+ *	@addr: the address of the LEB128 encoded data
+ *	@ret: address to store the result
+ *
+ *	Decode signed LEB128 data. The algorithm is taken from Appendix
+ *	C of the DWARF 3 spec. Return the number of bytes read.
+ */
+static inline unsigned long dwarf_read_leb128(char *addr, int *ret)
+{
+	unsigned char byte;
+	int result, shift;
+	int num_bits;
+	int count;
+
+	result = 0;
+	shift = 0;
+	count = 0;
+
+	while (1) {
+		byte = __raw_readb(addr);
+		addr++;
+		result |= (byte & 0x7f) << shift;
+		shift += 7;
+		count++;
+
+		if (!(byte & 0x80))
+			break;
+	}
+
+	/* The number of bits in a signed integer. */
+	num_bits = 8 * sizeof(result);
+
+	if ((shift < num_bits) && (byte & 0x40))
+		result |= (-1 << shift);
+
+	*ret = result;
+
+	return count;
+}
+
+/**
+ *	dwarf_read_encoded_value - return the decoded value at @addr
+ *	@addr: the address of the encoded value
+ *	@val: where to write the decoded value
+ *	@encoding: the encoding with which we can decode @addr
+ *
+ *	GCC emits encoded address in the .eh_frame FDE entries. Decode
+ *	the value at @addr using @encoding. The decoded value is written
+ *	to @val and the number of bytes read is returned.
+ */
+static int dwarf_read_encoded_value(char *addr, unsigned long *val,
+				    char encoding)
+{
+	unsigned long decoded_addr = 0;
+	int count = 0;
+
+	switch (encoding & 0x70) {
+	case DW_EH_PE_absptr:
+		break;
+	case DW_EH_PE_pcrel:
+		decoded_addr = (unsigned long)addr;
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", (encoding & 0x70));
+		BUG();
+	}
+
+	if ((encoding & 0x07) == 0x00)
+		encoding |= DW_EH_PE_udata4;
+
+	switch (encoding & 0x0f) {
+	case DW_EH_PE_sdata4:
+	case DW_EH_PE_udata4:
+		count += 4;
+		decoded_addr += __get_unaligned_cpu32(addr);
+		__raw_writel(decoded_addr, val);
+		break;
+	default:
+		pr_debug("encoding=0x%x\n", encoding);
+		BUG();
+	}
+
+	return count;
+}
+
+/**
+ *	dwarf_entry_len - return the length of an FDE or CIE
+ *	@addr: the address of the entry
+ *	@len: the length of the entry
+ *
+ *	Read the initial_length field of the entry and store the size of
+ *	the entry in @len. We return the number of bytes read. Return a
+ *	count of 0 on error.
+ */
+static inline int dwarf_entry_len(char *addr, unsigned long *len)
+{
+	u32 initial_len;
+	int count;
+
+	initial_len = __get_unaligned_cpu32(addr);
+	count = 4;
+
+	/*
+	 * An initial length field value in the range DW_LEN_EXT_LO -
+	 * DW_LEN_EXT_HI indicates an extension, and should not be
+	 * interpreted as a length. The only extension that we currently
+	 * understand is the use of DWARF64 addresses.
+	 */
+	if (initial_len >= DW_EXT_LO && initial_len <= DW_EXT_HI) {
+		/*
+		 * The 64-bit length field immediately follows the
+		 * compulsory 32-bit length field.
+		 */
+		if (initial_len == DW_EXT_DWARF64) {
+			*len = __get_unaligned_cpu64(addr + 4);
+			count = 12;
+		} else {
+			printk(KERN_WARNING "Unknown DWARF extension\n");
+			count = 0;
+		}
+	} else
+		*len = initial_len;
+
+	return count;
+}
+
+/**
+ *	dwarf_lookup_cie - locate the cie
+ *	@cie_ptr: pointer to help with lookup
+ */
+static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
+{
+	struct dwarf_cie *cie, *n;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+	/*
+	 * We've cached the last CIE we looked up because chances are
+	 * that the FDE wants this CIE.
+	 */
+	if (cached_cie && cached_cie->cie_pointer == cie_ptr) {
+		cie = cached_cie;
+		goto out;
+	}
+
+	list_for_each_entry_safe(cie, n, &dwarf_cie_list, link) {
+		if (cie->cie_pointer == cie_ptr) {
+			cached_cie = cie;
+			break;
+		}
+	}
+
+	/* Couldn't find the entry in the list. */
+	if (&cie->link == &dwarf_cie_list)
+		cie = NULL;
+out:
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+	return cie;
+}
+
+/**
+ *	dwarf_lookup_fde - locate the FDE that covers pc
+ *	@pc: the program counter
+ */
+struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
+{
+	unsigned long flags;
+	struct dwarf_fde *fde, *n;
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+	list_for_each_entry_safe(fde, n, &dwarf_fde_list, link) {
+		unsigned long start, end;
+
+		start = fde->initial_location;
+		end = fde->initial_location + fde->address_range;
+
+		if (pc >= start && pc < end)
+			break;
+	}
+
+	/* Couldn't find the entry in the list. */
+	if (&fde->link == &dwarf_fde_list)
+		fde = NULL;
+
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return fde;
+}
+
+/**
+ *	dwarf_cfa_execute_insns - execute instructions to calculate a CFA
+ *	@insn_start: address of the first instruction
+ *	@insn_end: address of the last instruction
+ *	@cie: the CIE for this function
+ *	@fde: the FDE for this function
+ *	@frame: the instructions calculate the CFA for this frame
+ *	@pc: the program counter of the address we're interested in
+ *
+ *	Execute the Call Frame instruction sequence starting at
+ *	@insn_start and ending at @insn_end. The instructions describe
+ *	how to calculate the Canonical Frame Address of a stackframe.
+ *	Store the results in @frame.
+ */
+static int dwarf_cfa_execute_insns(unsigned char *insn_start,
+				   unsigned char *insn_end,
+				   struct dwarf_cie *cie,
+				   struct dwarf_fde *fde,
+				   struct dwarf_frame *frame,
+				   unsigned long pc)
+{
+	unsigned char insn;
+	unsigned char *current_insn;
+	unsigned int count, delta, reg, expr_len, offset;
+
+	current_insn = insn_start;
+
+	while (current_insn < insn_end && frame->pc <= pc) {
+		insn = __raw_readb(current_insn++);
+
+		/*
+		 * Firstly, handle the opcodes that embed their operands
+		 * in the instructions.
+		 */
+		switch (DW_CFA_opcode(insn)) {
+		case DW_CFA_advance_loc:
+			delta = DW_CFA_operand(insn);
+			delta *= cie->code_alignment_factor;
+			frame->pc += delta;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_offset:
+			reg = DW_CFA_operand(insn);
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			dwarf_frame_alloc_regs(frame, reg);
+			frame->regs[reg].addr = offset;
+			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			continue;
+			/* NOTREACHED */
+		case DW_CFA_restore:
+			reg = DW_CFA_operand(insn);
+			continue;
+			/* NOTREACHED */
+		}
+
+		/*
+		 * Secondly, handle the opcodes that don't embed their
+		 * operands in the instruction.
+		 */
+		switch (insn) {
+		case DW_CFA_nop:
+			continue;
+		case DW_CFA_advance_loc1:
+			delta = *current_insn++;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc2:
+			delta = __get_unaligned_cpu16(current_insn);
+			current_insn += 2;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_advance_loc4:
+			delta = __get_unaligned_cpu32(current_insn);
+			current_insn += 4;
+			frame->pc += delta * cie->code_alignment_factor;
+			break;
+		case DW_CFA_offset_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			break;
+		case DW_CFA_restore_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			break;
+		case DW_CFA_undefined:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			break;
+		case DW_CFA_def_cfa:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_offset);
+			current_insn += count;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_register:
+			count = dwarf_read_uleb128(current_insn,
+						   &frame->cfa_register);
+			current_insn += count;
+			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
+			break;
+		case DW_CFA_def_cfa_offset:
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			frame->cfa_offset = offset;
+			break;
+		case DW_CFA_def_cfa_expression:
+			count = dwarf_read_uleb128(current_insn, &expr_len);
+			current_insn += count;
+
+			frame->cfa_expr = current_insn;
+			frame->cfa_expr_len = expr_len;
+			current_insn += expr_len;
+
+			frame->flags |= DWARF_FRAME_CFA_REG_EXP;
+			break;
+		case DW_CFA_offset_extended_sf:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			current_insn += count;
+			offset *= cie->data_alignment_factor;
+			dwarf_frame_alloc_regs(frame, reg);
+			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			frame->regs[reg].addr = offset;
+			break;
+		case DW_CFA_val_offset:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_leb128(current_insn, &offset);
+			offset *= cie->data_alignment_factor;
+			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			frame->regs[reg].addr = offset;
+			break;
+		default:
+			pr_debug("unhandled DWARF instruction 0x%x\n", insn);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *	dwarf_unwind_stack - recursively unwind the stack
+ *	@pc: address of the function to unwind
+ *	@prev: struct dwarf_frame of the previous stackframe on the callstack
+ *
+ *	Return a struct dwarf_frame representing the most recent frame
+ *	on the callstack. Each of the lower (older) stack frames are
+ *	linked via the "prev" member.
+ */
+struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
+				       struct dwarf_frame *prev)
+{
+	struct dwarf_frame *frame;
+	struct dwarf_cie *cie;
+	struct dwarf_fde *fde;
+	unsigned long addr;
+	int i, offset;
+
+	/*
+	 * If this is the first invocation of this recursive function we
+	 * need get the contents of a physical register to get the CFA
+	 * in order to begin the virtual unwinding of the stack.
+	 *
+	 * The constant DWARF_ARCH_UNWIND_OFFSET is added to the address of
+	 * this function because the return address register
+	 * (DWARF_ARCH_RA_REG) will probably not be initialised until a
+	 * few instructions into the prologue.
+	 */
+	if (!pc && !prev) {
+		pc = (unsigned long)&dwarf_unwind_stack;
+		pc += DWARF_ARCH_UNWIND_OFFSET;
+	}
+
+	frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+	if (!frame)
+		return NULL;
+
+	frame->prev = prev;
+
+	fde = dwarf_lookup_fde(pc);
+	if (!fde) {
+		/*
+		 * This is our normal exit path - the one that stops the
+		 * recursion. There's two reasons why we might exit
+		 * here,
+		 *
+		 *	a) pc has no asscociated DWARF frame info and so
+		 *	we don't know how to unwind this frame. This is
+		 *	usually the case when we're trying to unwind a
+		 *	frame that was called from some assembly code
+		 *	that has no DWARF info, e.g. syscalls.
+		 *
+		 *	b) the DEBUG info for pc is bogus. There's
+		 *	really no way to distinguish this case from the
+		 *	case above, which sucks because we could print a
+		 *	warning here.
+		 */
+		return NULL;
+	}
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+
+	frame->pc = fde->initial_location;
+
+	/* CIE initial instructions */
+	dwarf_cfa_execute_insns(cie->initial_instructions,
+				cie->instructions_end, cie, fde, frame, pc);
+
+	/* FDE instructions */
+	dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
+				fde, frame, pc);
+
+	/* Calculate the CFA */
+	switch (frame->flags) {
+	case DWARF_FRAME_CFA_REG_OFFSET:
+		if (prev) {
+			BUG_ON(!prev->regs[frame->cfa_register].flags);
+
+			addr = prev->cfa;
+			addr += prev->regs[frame->cfa_register].addr;
+			frame->cfa = __raw_readl(addr);
+
+		} else {
+			/*
+			 * Again, this is the first invocation of this
+			 * recurisve function. We need to physically
+			 * read the contents of a register in order to
+			 * get the Canonical Frame Address for this
+			 * function.
+			 */
+			frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
+		}
+
+		frame->cfa += frame->cfa_offset;
+		break;
+	default:
+		BUG();
+	}
+
+	/* If we haven't seen the return address reg, we're screwed. */
+	BUG_ON(!frame->regs[DWARF_ARCH_RA_REG].flags);
+
+	for (i = 0; i <= frame->num_regs; i++) {
+		struct dwarf_reg *reg = &frame->regs[i];
+
+		if (!reg->flags)
+			continue;
+
+		offset = reg->addr;
+		offset += frame->cfa;
+	}
+
+	addr = frame->cfa + frame->regs[DWARF_ARCH_RA_REG].addr;
+	frame->return_addr = __raw_readl(addr);
+
+	frame->next = dwarf_unwind_stack(frame->return_addr, frame);
+	return frame;
+}
+
+static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
+			   unsigned char *end)
+{
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+
+	cie = kzalloc(sizeof(*cie), GFP_KERNEL);
+	if (!cie)
+		return -ENOMEM;
+
+	cie->length = len;
+
+	/*
+	 * Record the offset into the .eh_frame section
+	 * for this CIE. It allows this CIE to be
+	 * quickly and easily looked up from the
+	 * corresponding FDE.
+	 */
+	cie->cie_pointer = (unsigned long)entry;
+
+	cie->version = *(char *)p++;
+	BUG_ON(cie->version != 1);
+
+	cie->augmentation = p;
+	p += strlen(cie->augmentation) + 1;
+
+	count = dwarf_read_uleb128(p, &cie->code_alignment_factor);
+	p += count;
+
+	count = dwarf_read_leb128(p, &cie->data_alignment_factor);
+	p += count;
+
+	/*
+	 * Which column in the rule table contains the
+	 * return address?
+	 */
+	if (cie->version == 1) {
+		cie->return_address_reg = __raw_readb(p);
+		p++;
+	} else {
+		count = dwarf_read_uleb128(p, &cie->return_address_reg);
+		p += count;
+	}
+
+	if (cie->augmentation[0] == 'z') {
+		unsigned int length, count;
+		cie->flags |= DWARF_CIE_Z_AUGMENTATION;
+
+		count = dwarf_read_uleb128(p, &length);
+		p += count;
+
+		BUG_ON((unsigned char *)p > end);
+
+		cie->initial_instructions = p + length;
+		cie->augmentation++;
+	}
+
+	while (*cie->augmentation) {
+		/*
+		 * "L" indicates a byte showing how the
+		 * LSDA pointer is encoded. Skip it.
+		 */
+		if (*cie->augmentation == 'L') {
+			p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'R') {
+			/*
+			 * "R" indicates a byte showing
+			 * how FDE addresses are
+			 * encoded.
+			 */
+			cie->encoding = *(char *)p++;
+			cie->augmentation++;
+		} else if (*cie->augmentation == 'P') {
+			/*
+			 * "R" indicates a personality
+			 * routine in the CIE
+			 * augmentation.
+			 */
+			BUG();
+		} else if (*cie->augmentation == 'S') {
+			BUG();
+		} else {
+			/*
+			 * Unknown augmentation. Assume
+			 * 'z' augmentation.
+			 */
+			p = cie->initial_instructions;
+			BUG_ON(!p);
+			break;
+		}
+	}
+
+	cie->initial_instructions = p;
+	cie->instructions_end = end;
+
+	/* Add to list */
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+	list_add_tail(&cie->link, &dwarf_cie_list);
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	return 0;
+}
+
+static int dwarf_parse_fde(void *entry, u32 entry_type,
+			   void *start, unsigned long len)
+{
+	struct dwarf_fde *fde;
+	struct dwarf_cie *cie;
+	unsigned long flags;
+	int count;
+	void *p = start;
+
+	fde = kzalloc(sizeof(*fde), GFP_KERNEL);
+	if (!fde)
+		return -ENOMEM;
+
+	fde->length = len;
+
+	/*
+	 * In a .eh_frame section the CIE pointer is the
+	 * delta between the address within the FDE
+	 */
+	fde->cie_pointer = (unsigned long)(p - entry_type - 4);
+
+	cie = dwarf_lookup_cie(fde->cie_pointer);
+	fde->cie = cie;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->initial_location,
+						 cie->encoding);
+	else
+		count = dwarf_read_addr(p, &fde->initial_location);
+
+	p += count;
+
+	if (cie->encoding)
+		count = dwarf_read_encoded_value(p, &fde->address_range,
+						 cie->encoding & 0x0f);
+	else
+		count = dwarf_read_addr(p, &fde->address_range);
+
+	p += count;
+
+	if (fde->cie->flags & DWARF_CIE_Z_AUGMENTATION) {
+		unsigned int length;
+		count = dwarf_read_uleb128(p, &length);
+		p += count + length;
+	}
+
+	/* Call frame instructions. */
+	fde->instructions = p;
+	fde->end = start + len;
+
+	/* Add to list. */
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+	list_add_tail(&fde->link, &dwarf_fde_list);
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+
+	return 0;
+}
+
+static void dwarf_unwinder_dump(struct task_struct *task, struct pt_regs *regs,
+				unsigned long *sp,
+				const struct stacktrace_ops *ops, void *data)
+{
+	struct dwarf_frame *frame;
+
+	frame = dwarf_unwind_stack(0, NULL);
+
+	while (frame && frame->return_addr) {
+		ops->address(data, frame->return_addr, 1);
+		frame = frame->next;
+	}
+}
+
+static struct unwinder dwarf_unwinder = {
+	.name = "dwarf-unwinder",
+	.dump = dwarf_unwinder_dump,
+	.rating = 150,
+};
+
+static void dwarf_unwinder_cleanup(void)
+{
+	struct dwarf_cie *cie, *m;
+	struct dwarf_fde *fde, *n;
+	unsigned long flags;
+
+	/*
+	 * Deallocate all the memory allocated for the DWARF unwinder.
+	 * Traverse all the FDE/CIE lists and remove and free all the
+	 * memory associated with those data structures.
+	 */
+	spin_lock_irqsave(&dwarf_cie_lock, flags);
+	list_for_each_entry_safe(cie, m, &dwarf_cie_list, link)
+		kfree(cie);
+	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+	spin_lock_irqsave(&dwarf_fde_lock, flags);
+	list_for_each_entry_safe(fde, n, &dwarf_fde_list, link)
+		kfree(fde);
+	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+}
+
+/**
+ *	dwarf_unwinder_init - initialise the dwarf unwinder
+ *
+ *	Build the data structures describing the .dwarf_frame section to
+ *	make it easier to lookup CIE and FDE entries. Because the
+ *	.eh_frame section is packed as tightly as possible it is not
+ *	easy to lookup the FDE for a given PC, so we build a list of FDE
+ *	and CIE entries that make it easier.
+ */
+void dwarf_unwinder_init(void)
+{
+	u32 entry_type;
+	void *p, *entry;
+	int count, err;
+	unsigned long len;
+	unsigned int c_entries, f_entries;
+	unsigned char *end;
+	INIT_LIST_HEAD(&dwarf_cie_list);
+	INIT_LIST_HEAD(&dwarf_fde_list);
+
+	c_entries = 0;
+	f_entries = 0;
+	entry = &__start_eh_frame;
+
+	while ((char *)entry < __stop_eh_frame) {
+		p = entry;
+
+		count = dwarf_entry_len(p, &len);
+		if (count == 0) {
+			/*
+			 * We read a bogus length field value. There is
+			 * nothing we can do here apart from disabling
+			 * the DWARF unwinder. We can't even skip this
+			 * entry and move to the next one because 'len'
+			 * tells us where our next entry is.
+			 */
+			goto out;
+		} else
+			p += count;
+
+		/* initial length does not include itself */
+		end = p + len;
+
+		entry_type = __get_unaligned_cpu32(p);
+		p += 4;
+
+		if (entry_type == DW_EH_FRAME_CIE) {
+			err = dwarf_parse_cie(entry, p, len, end);
+			if (err < 0)
+				goto out;
+			else
+				c_entries++;
+		} else {
+			err = dwarf_parse_fde(entry, entry_type, p, len);
+			if (err < 0)
+				goto out;
+			else
+				f_entries++;
+		}
+
+		entry = (char *)entry + len + 4;
+	}
+
+	printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
+	       c_entries, f_entries);
+
+	err = unwinder_register(&dwarf_unwinder);
+	if (err)
+		goto out;
+
+	return;
+
+out:
+	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
+	dwarf_unwinder_cleanup();
+}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 278c68c6048..2bb43dc74f2 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -14,6 +14,7 @@
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
+#include <asm/dwarf.h>
 #include <asm/thread_info.h>
 #include <cpu/mmu_context.h>
 
@@ -261,6 +262,9 @@ void __init init_IRQ(void)
 		sh_mv.mv_init_irq();
 
 	irq_ctx_init(smp_processor_id());
+
+	/* This needs to be early, but not too early.. */
+	dwarf_unwinder_init();
 }
 
 #ifdef CONFIG_SPARSE_IRQ
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 80dc9f8d941..1b7d9d541e0 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -12,7 +12,7 @@ OUTPUT_ARCH(sh)
 
 #include <asm/thread_info.h>
 #include <asm/cache.h>
-#include <asm-generic/vmlinux.lds.h>
+#include <asm/vmlinux.lds.h>
 
 ENTRY(_start)
 SECTIONS
@@ -70,6 +70,8 @@ SECTIONS
 
 	_edata = .;			/* End of data section */
 
+	DWARF_EH_FRAME
+
 	. = ALIGN(PAGE_SIZE);		/* Init code and data */
 	__init_begin = .;
 	INIT_TEXT_SECTION(PAGE_SIZE)
-- 
cgit v1.2.3


From 0b930489b8606224b829c8a6037eac24249a97ec Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 2 Aug 2009 22:33:26 +0100
Subject: sh: Setup the frame register in asm code

In order to use DWARF unwinder info the frame register has to contain a
valid value. Whilst GCC takes care of this for C code, we have to do it
ourselves for assembly.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/entry-macros.S | 12 ++++++++++++
 arch/sh/kernel/cpu/sh3/entry.S     |  1 +
 arch/sh/kernel/entry-common.S      |  1 +
 3 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 1bdd93891cd..64fd0de24da 100644
--- a/arch/sh/include/asm/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
@@ -108,3 +108,15 @@
 #else
 # define PREF(x)	nop
 #endif
+
+	/*
+	 * Macro for use within assembly. Because the DWARF unwinder
+	 * needs to use the frame register to unwind the stack, we
+	 * need to setup r14 with the value of the stack pointer as
+	 * the return address is usually on the stack somewhere.
+	 */
+	.macro	setup_frame_reg
+#ifdef CONFIG_DWARF_UNWINDER
+	mov	r15, r14
+#endif
+	.endm
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 3cb531f233f..67ad6467c69 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -137,6 +137,7 @@ ENTRY(tlb_protection_violation_store)
 	 mov	#1, r5
 
 call_dpf:
+	setup_frame_reg
 	mov.l	1f, r0
 	mov	r5, r8
 	mov.l	@r0, r6
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index fc26ccd8278..b3b215fb21f 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -285,6 +285,7 @@ ret_from_fork:
  * system calls and debug traps through their respective jump tables.
  */
 ENTRY(system_call)
+	setup_frame_reg
 #if !defined(CONFIG_CPU_SH2)
 	mov.l	1f, r9
 	mov.l	@r9, r8		! Read from TRA (Trap Address) Register
-- 
cgit v1.2.3


From cafb0ddac60556f7d2d4cd0ef1a93da8a6c71ffb Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 2 Aug 2009 22:40:11 +0100
Subject: sh: Add CFI annotations for exception return.

Annotate various assembly code paths with CFI assembler directives so
that DWARF unwind info is available for the unwinder.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/entry-common.S | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index b3b215fb21f..e63178fefb9 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -43,6 +43,7 @@
  *	syscall #
  *
  */
+#include <asm/dwarf.h>
 
 #if defined(CONFIG_PREEMPT)
 #  define preempt_stop()	cli ; TRACE_IRQS_OFF
@@ -66,6 +67,11 @@ ENTRY(exception_error)
 
 	.align	2
 ret_from_exception:
+	CFI_STARTPROC simple
+	CFI_DEF_CFA r14, 0
+	CFI_REL_OFFSET 17, 64
+	CFI_REL_OFFSET 15, 0
+	CFI_REL_OFFSET 14, 56
 	preempt_stop()
 ENTRY(ret_from_irq)
 	!
@@ -240,6 +246,7 @@ debug_trap:
 	 nop
 	bra	__restore_all
 	 nop
+	CFI_ENDPROC
 
 	.align	2
 1:	.long	debug_trap_table
-- 
cgit v1.2.3


From 3497447f15485b479366ec86effaac16fc82411b Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 02:10:59 +0900
Subject: sh: unwinder: Fix up usage of unaligned accessors.

This was using internal symbols for unaligned accesses, bypassing the
exposed interface for variable sized safe accesses. This converts all of
the __get_unaligned_cpuXX() users over to get_unaligned() directly,
relying on the cast to select the proper internal routine.

Additionally, the __put_unaligned_cpuXX() case is superfluous given that
the destination address is aligned in all of the current cases, so just
drop that outright.

Furthermore, this switches to the asm/unaligned.h header instead of the
asm-generic version, which was silently bypassing the SH-4A optimized
unaligned ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 09c6fd7fd05..d1d8536e5ba 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -21,7 +21,7 @@
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
 #include <asm/sections.h>
-#include <asm-generic/unaligned.h>
+#include <asm/unaligned.h>
 #include <asm/dwarf.h>
 #include <asm/stacktrace.h>
 
@@ -87,11 +87,9 @@ static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
  *	from @src and writing to @dst, because they can be arbitrarily
  *	aligned. Return 'n' - the number of bytes read.
  */
-static inline int dwarf_read_addr(void *src, void *dst)
+static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
 {
-	u32 val = __get_unaligned_cpu32(src);
-	__put_unaligned_cpu32(val, dst);
-
+	*dst = get_unaligned(src);
 	return sizeof(unsigned long *);
 }
 
@@ -207,7 +205,7 @@ static int dwarf_read_encoded_value(char *addr, unsigned long *val,
 	case DW_EH_PE_sdata4:
 	case DW_EH_PE_udata4:
 		count += 4;
-		decoded_addr += __get_unaligned_cpu32(addr);
+		decoded_addr += get_unaligned((u32 *)addr);
 		__raw_writel(decoded_addr, val);
 		break;
 	default:
@@ -232,7 +230,7 @@ static inline int dwarf_entry_len(char *addr, unsigned long *len)
 	u32 initial_len;
 	int count;
 
-	initial_len = __get_unaligned_cpu32(addr);
+	initial_len = get_unaligned((u32 *)addr);
 	count = 4;
 
 	/*
@@ -247,7 +245,7 @@ static inline int dwarf_entry_len(char *addr, unsigned long *len)
 		 * compulsory 32-bit length field.
 		 */
 		if (initial_len == DW_EXT_DWARF64) {
-			*len = __get_unaligned_cpu64(addr + 4);
+			*len = get_unaligned((u64 *)addr + 4);
 			count = 12;
 		} else {
 			printk(KERN_WARNING "Unknown DWARF extension\n");
@@ -392,12 +390,12 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			frame->pc += delta * cie->code_alignment_factor;
 			break;
 		case DW_CFA_advance_loc2:
-			delta = __get_unaligned_cpu16(current_insn);
+			delta = get_unaligned((u16 *)current_insn);
 			current_insn += 2;
 			frame->pc += delta * cie->code_alignment_factor;
 			break;
 		case DW_CFA_advance_loc4:
-			delta = __get_unaligned_cpu32(current_insn);
+			delta = get_unaligned((u32 *)current_insn);
 			current_insn += 4;
 			frame->pc += delta * cie->code_alignment_factor;
 			break;
@@ -841,7 +839,7 @@ void dwarf_unwinder_init(void)
 		/* initial length does not include itself */
 		end = p + len;
 
-		entry_type = __get_unaligned_cpu32(p);
+		entry_type = get_unaligned((u32 *)p);
 		p += 4;
 
 		if (entry_type == DW_EH_FRAME_CIE) {
-- 
cgit v1.2.3


From ba6c548701ef7a93b9ea05d1506d2b62f1628333 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Thu, 13 Aug 2009 18:18:00 +0100
Subject: ia64: IOMMU passthrough mode shouldn't trigger swiotlb init

Since commit 19943b0e30b05d42e494ae6fef78156ebc8c637e ('intel-iommu:
Unify hardware and software passthrough support'), hardware passthrough
mode will do the same as software passthrough mode was doing -- it'll
still use the IOMMU normally for devices which can't address all of
memory. This means that we don't need to bother with swiotlb.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/ia64/kernel/pci-swiotlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 223abb13410..285aae8431c 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -46,7 +46,7 @@ void __init swiotlb_dma_init(void)
 
 void __init pci_swiotlb_init(void)
 {
-	if (!iommu_detected || iommu_pass_through) {
+	if (!iommu_detected) {
 #ifdef CONFIG_IA64_GENERIC
 		swiotlb = 1;
 		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
-- 
cgit v1.2.3


From bf43a160ff2d67a21b076286bab6f5e2c993bd0a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 03:06:13 +0900
Subject: sh: unwinder: Restore put_unaligned() for an unaligned destination.

The destination address might be unaligned, so set it with
put_unaligned() for safety. This restores the previous behaviour, albeit
through the proper API.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index d1d8536e5ba..49d039f1942 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -89,7 +89,8 @@ static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
  */
 static inline int dwarf_read_addr(unsigned long *src, unsigned long *dst)
 {
-	*dst = get_unaligned(src);
+	u32 val = get_unaligned(src);
+	put_unaligned(val, dst);
 	return sizeof(unsigned long *);
 }
 
-- 
cgit v1.2.3


From b88fb83b138d4a377abea9461b2d58b9bf8ad9fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: netx: Use get_irqnr_preamble to initialize base register
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch optimizes the irq handling a bit.  Now the base register is
only computed once per irq exception instead of at least twice.
Moreover the mov+add sequence is simplified to an ldr (which might save
some cycles depending on memory timing).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-netx/include/mach/entry-macro.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index a1952a0feda..844f1f9acbd 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -24,15 +24,13 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =io_p2v(0x001ff000)
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #io_p2v(0x00100000)
-		add	\base, \base, #0x000ff000
-
 		ldr	\irqstat, [\base, #0]
 		clz	\irqnr, \irqstat
 		rsb     \irqnr, \irqnr, #31
-- 
cgit v1.2.3


From 181f817eaaca4c1f8a9c265d339d2b96de8b245d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: [ARM] support tracing when using newer compilers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since gcc 4.4 the name and calling convention for function profiling
on ARM changed.  With this patch both types are supported.

See http://sourceware.org/ml/libc-ports/2008-04/msg00009.html for some
details.

Lightly-Tested-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/ftrace.h  |  1 +
 arch/arm/kernel/armksyms.c     |  1 +
 arch/arm/kernel/entry-common.S | 19 +++++++++++++++++++
 3 files changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..0d4c478e01b 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
+extern void __gnu_mcount_nc(void);
 #endif
 
 #endif
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 531e1860e54..0e627705f74 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..99208728d48 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -132,6 +132,25 @@ ftrace_call:
 
 #else
 
+ENTRY(__gnu_mcount_nc)
+	stmdb sp!, {r0-r3, lr}
+	ldr r0, =ftrace_trace_function
+	ldr r2, [r0]
+	adr r0, ftrace_stub
+	cmp r0, r2
+	bne gnu_trace
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
+gnu_trace:
+	ldr r1, [sp, #20]			@ lr of instrumented routine
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+	mov lr, pc
+	mov pc, r2
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
 	ldr r0, =ftrace_trace_function
-- 
cgit v1.2.3


From 0d928b0b616d1c5c5fe76019a87cba171ca91633 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: Complete irq tracing support for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Before this patch enabling and disabling irqs in assembler code and by
the hardware wasn't tracked completly.

I had to transpose two instructions in arch/arm/lib/bitops.h because
restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/assembler.h | 49 ++++++++++++++++++++++++++++++++++++----
 arch/arm/kernel/entry-armv.S     | 10 ++++----
 arch/arm/lib/bitops.h            |  2 +-
 3 files changed, 49 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..44912cd5da1 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
  * Enable and disable interrupts
  */
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	cpsid	i
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	cpsie	i
 	.endm
 #else
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	msr	cpsr_c, #SVC_MODE
 	.endm
 #endif
 
+	.macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl	trace_hardirqs_off
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	/*
+	 * actually the registers should be pushed and pop'd conditionally, but
+	 * after bl the flags are certainly clobbered
+	 */
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl\cond	trace_hardirqs_on
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on
+	asm_trace_hardirqs_on_cond al
+	.endm
+
+	.macro disable_irq
+	disable_irq_notrace
+	asm_trace_hardirqs_off
+	.endm
+
+	.macro enable_irq
+	asm_trace_hardirqs_on
+	enable_irq_notrace
+	.endm
 /*
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
  */
-	.macro	restore_irqs, oldcpsr
+	.macro	restore_irqs_notrace, oldcpsr
 	msr	cpsr_c, \oldcpsr
 	.endm
 
+	.macro restore_irqs, oldcpsr
+	tst	\oldcpsr, #PSR_I_BIT
+	asm_trace_hardirqs_on_cond eq
+	restore_irqs_notrace \oldcpsr
+	.endm
+
 #define USER(x...)				\
 9999:	x;					\
 	.section __ex_table,"a";		\
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..792abd0dfae 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -151,6 +151,8 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -206,9 +208,6 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -383,6 +382,8 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -437,9 +438,6 @@ __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index c7f2627385e..d42252918bf 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -60,8 +60,8 @@
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
 	\store	r2, [r1]
-	restore_irqs ip
 	moveq	r0, #0
+	restore_irqs ip
 	mov	pc, lr
 	.endm
 #endif
-- 
cgit v1.2.3


From d45a398fca6b03f16d01c9253c3a8c96d804f532 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: Use kernel/Kconfig.preempt for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

before this patch ARM had it's own definition of CONFIG_PREEMPT.
Instead of that use the general definition provided in
kernel/Kconfig.preempt.

This patch changes the available options in *config.  Namely PREEMPT
isn't a stand alone bool anymore, but part of a 'choice' the
following Kconfig symbols are added:

	PREEMPT_NONE
	PREEMPT_VOLUNTARY

Selecting PREEMPT_NONE now produces exactly the code as not selecting
PREEMPT before (apart from a comment in
/sys/kernel/debug/tracing/(per_cpu/cpuX/)?trace).  The only difference
PREEMPT_VOLUNTARY does is that might_resched might reschedule.  Both
should't introduce regressions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
---
 arch/arm/Kconfig | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..eac1a927ca6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -962,18 +962,7 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt
 
 config HZ
 	int
-- 
cgit v1.2.3


From ac25150f2c55ea26447af0fa1d4e2bb07f97384d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 21:09:21 +0200
Subject: [ARM] let arch/arm/Kconfig source drivers/Kconfig
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The changes introduced by this change are:
  - drivers/mtd/Kconfig doesn't depend on ALIGNMENT_TRAP ||
    !CPU_CP15_MMU any more
  - the following files are sourced additionally:
    + drivers/macintosh/Kconfig
      completely depends on PPC || MAC || X86
    + drivers/telephony/Kconfig
      new
    + drivers/pps/Kconfig
      new
    + drivers/infiniband/Kconfig
      new
    + drivers/edac/Kconfig
      depends on X86 || PPC
    + drivers/vlynq/Kconfig
      depends on AR7 && EXPERIMENTAL (that is ARCH_MIPS)
    + drivers/xen/Kconfig
      everything depends on XEN
    + drivers/platform/Kconfig
      depends on X86
  - drivers/regulator/Kconfig is sourced later as is
    drivers/accessibility/Kconfig

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/Kconfig | 102 +------------------------------------------------------
 1 file changed, 1 insertion(+), 101 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eac1a927ca6..a7eb44a1955 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1366,107 +1366,7 @@ endmenu
 
 source "net/Kconfig"
 
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
-- 
cgit v1.2.3


From f54aab4a7486fb7947d6d746f3423f67676811c8 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 04:59:50 +0900
Subject: sh: oprofile: Kill off dead valid_kernel_stack().

This is no longer used, kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/oprofile/backtrace.c | 27 ---------------------------
 1 file changed, 27 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/oprofile/backtrace.c b/arch/sh/oprofile/backtrace.c
index 37cd75d7930..2bc74de23f0 100644
--- a/arch/sh/oprofile/backtrace.c
+++ b/arch/sh/oprofile/backtrace.c
@@ -81,33 +81,6 @@ user_backtrace(unsigned long *stackaddr, struct pt_regs *regs)
 	return stackaddr;
 }
 
-/*
- * |             | /\ Higher addresses
- * |             |
- * --------------- stack base (address of current_thread_info)
- * | thread info |
- * .             .
- * |    stack    |
- * --------------- saved regs->regs[15] value if valid
- * .             .
- * --------------- struct pt_regs stored on stack (struct pt_regs *)
- * |             |
- * .             .
- * |             |
- * --------------- ???
- * |             |
- * |             | \/ Lower addresses
- *
- * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values
- */
-static int valid_kernel_stack(unsigned long *stackaddr, struct pt_regs *regs)
-{
-	unsigned long stack = (unsigned long)regs;
-	unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE;
-
-	return ((unsigned long)stackaddr > stack) && ((unsigned long)stackaddr < stack_base);
-}
-
 void sh_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	unsigned long *stackaddr;
-- 
cgit v1.2.3


From f826466772ae52f26152287fcb2259351de78f0f Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 13 Aug 2009 20:41:31 +0100
Subject: sh: Delete DWARF_ARCH_UNWIND_OFFSET

Trying to figure out the best value for DWARF_ARCH_UNWIND_OFFSET is
tricky at best. Various things can change the size (and offset from the
beginning of the function) of the prologue. Notably, turning on ftrace
adds calls to mcount at the beginning of functions, thereby pushing the
prologue further into the function.

So replace DWARF_ARCH_UNWIND_OFFSET with some code that continues to
execute CFA instructions until the value of return address register is
defined. This is safe to do because we know that the return address must
have been pushed onto the frame before our first function call; we just
can't figure out where at compile-time.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/dwarf.h |  5 -----
 arch/sh/kernel/dwarf.c      | 44 +++++++++++++++++++++++++++++++++++---------
 2 files changed, 35 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index 23eba12880b..60b180728d8 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -193,11 +193,6 @@
  */
 #define DWARF_ARCH_RA_REG	17
 
-/*
- * At what offset into dwarf_unwind_stack() is DWARF_ARCH_RA_REG setup?
- */
-#define DWARF_ARCH_UNWIND_OFFSET	0x20
-
 #ifndef __ASSEMBLY__
 /*
  * Read either the frame pointer (r14) or the stack pointer (r15).
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 49d039f1942..83f3cc92549 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -330,6 +330,7 @@ struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
  *	@fde: the FDE for this function
  *	@frame: the instructions calculate the CFA for this frame
  *	@pc: the program counter of the address we're interested in
+ *	@define_ra: keep executing insns until the return addr reg is defined?
  *
  *	Execute the Call Frame instruction sequence starting at
  *	@insn_start and ending at @insn_end. The instructions describe
@@ -341,17 +342,36 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 				   struct dwarf_cie *cie,
 				   struct dwarf_fde *fde,
 				   struct dwarf_frame *frame,
-				   unsigned long pc)
+				   unsigned long pc,
+				   bool define_ra)
 {
 	unsigned char insn;
 	unsigned char *current_insn;
 	unsigned int count, delta, reg, expr_len, offset;
+	bool seen_ra_reg;
 
 	current_insn = insn_start;
 
-	while (current_insn < insn_end && frame->pc <= pc) {
+	/*
+	 * If we're executing instructions for the dwarf_unwind_stack()
+	 * FDE we need to keep executing instructions until the value of
+	 * DWARF_ARCH_RA_REG is defined. See the comment in
+	 * dwarf_unwind_stack() for more details.
+	 */
+	if (define_ra)
+		seen_ra_reg = false;
+	else
+		seen_ra_reg = true;
+
+	while (current_insn < insn_end && (frame->pc <= pc || !seen_ra_reg) ) {
 		insn = __raw_readb(current_insn++);
 
+		if (!seen_ra_reg) {
+			if (frame->num_regs >= DWARF_ARCH_RA_REG &&
+			    frame->regs[DWARF_ARCH_RA_REG].flags)
+				seen_ra_reg = true;
+		}
+
 		/*
 		 * Firstly, handle the opcodes that embed their operands
 		 * in the instructions.
@@ -490,20 +510,25 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	struct dwarf_fde *fde;
 	unsigned long addr;
 	int i, offset;
+	bool define_ra = false;
 
 	/*
 	 * If this is the first invocation of this recursive function we
 	 * need get the contents of a physical register to get the CFA
 	 * in order to begin the virtual unwinding of the stack.
 	 *
-	 * The constant DWARF_ARCH_UNWIND_OFFSET is added to the address of
-	 * this function because the return address register
-	 * (DWARF_ARCH_RA_REG) will probably not be initialised until a
-	 * few instructions into the prologue.
+	 * Setting "define_ra" to true indictates that we want
+	 * dwarf_cfa_execute_insns() to continue executing instructions
+	 * until we know how to calculate the value of DWARF_ARCH_RA_REG
+	 * (which we need in order to kick off the whole unwinding
+	 * process).
+	 *
+	 * NOTE: the return address is guaranteed to be setup by the
+	 * time this function makes its first function call.
 	 */
 	if (!pc && !prev) {
 		pc = (unsigned long)&dwarf_unwind_stack;
-		pc += DWARF_ARCH_UNWIND_OFFSET;
+		define_ra = true;
 	}
 
 	frame = kzalloc(sizeof(*frame), GFP_KERNEL);
@@ -539,11 +564,12 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 
 	/* CIE initial instructions */
 	dwarf_cfa_execute_insns(cie->initial_instructions,
-				cie->instructions_end, cie, fde, frame, pc);
+				cie->instructions_end, cie, fde,
+				frame, pc, false);
 
 	/* FDE instructions */
 	dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
-				fde, frame, pc);
+				fde, frame, pc, define_ra);
 
 	/* Calculate the CFA */
 	switch (frame->flags) {
-- 
cgit v1.2.3


From 48ec45e725aa385d72bced73b267dfaf13351876 Mon Sep 17 00:00:00 2001
From: Davide Rizzo <elpa.rizzo@gmail.com>
Date: Thu, 13 Aug 2009 11:53:53 +0200
Subject: ARM: S3C24XX: Fix clkout mpx error

Bug correction: CLK Outputs cannot have XTAL as parent

Signed-off-by: Davide Rizzo <elpa.rizzo@gmail.com>
[ben-linux@fluff.org: updated patch subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/clock-dclk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 5b75a797b5a..0afb217a775 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 
 	/* calculate the MISCCR setting for the clock */
 
-	if (parent == &clk_xtal)
+	if (parent == &clk_mpll)
 		source = S3C2410_MISCCR_CLK0_MPLL;
 	else if (parent == &clk_upll)
 		source = S3C2410_MISCCR_CLK0_UPLL;
-- 
cgit v1.2.3


From 4d4e2bc268e188a8793ce96af20576374098c17b Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 24 Jun 2009 08:05:43 +0200
Subject: ARM: NCP: make ncp_iodesc static and move it to initdata section

Make ncp_iodesc struct static to clean a public namespace a bit and move
it to __initdata section to save memory a bit.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-ncp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636f854..55e9bbfaf68 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
 	&s3c_device_i2c0,
 };
 
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
 
 static void __init ncp_map_io(void)
 {
-- 
cgit v1.2.3


From bd258e525a40efc2c3798b76a725cd3d5c4e3d93 Mon Sep 17 00:00:00 2001
From: Matt Hsu <matt@0xlab.org>
Date: Mon, 29 Jun 2009 19:03:41 +0800
Subject: ARM: S3C64XX: Add UART2,UART3 support for SMDK6410 (resend)

Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410.

Signed-off-by: Matt Hsu <matt@0xlab.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7dea567..ea51dbe76e3 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 };
 
-- 
cgit v1.2.3


From 25b15da14a789846672e73d19862b5fe5ad14346 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 4 Aug 2009 16:25:12 +0100
Subject: ARM: S3C64XX: Add mapping for IISv4 port

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..41d01a91a5a 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -46,6 +46,7 @@
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-- 
cgit v1.2.3


From c7c8f615c8d1b49225ed86406603e7ac24d2a6d9 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:59 +0100
Subject: ARM: S3C64XX: Add address mapping for AC97 controller

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 41d01a91a5a..9fdf87ae47c 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -42,6 +42,7 @@
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
-- 
cgit v1.2.3


From c233d94931cebc8ec805fb98856f34ad16d49e4f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:57 +0100
Subject: ARM: S3C: Move S3C64xx audio devices into S3C64xx directory

Allowing us to make the Kconfig a little bit saner.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile        |  1 -
 arch/arm/plat-s3c/dev-audio.c     | 68 ---------------------------------------
 arch/arm/plat-s3c64xx/Makefile    |  3 +-
 arch/arm/plat-s3c64xx/dev-audio.c | 68 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 70 insertions(+), 70 deletions(-)
 delete mode 100644 arch/arm/plat-s3c/dev-audio.c
 create mode 100644 arch/arm/plat-s3c64xx/dev-audio.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3e27720ae35..f32d045e7e3 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c/dev-audio.c
deleted file mode 100644
index 1322beb40dd..00000000000
--- a/arch/arm/plat-s3c/dev-audio.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882cd626..b85b4359e93 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
new file mode 100644
index 00000000000..1322beb40dd
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
-- 
cgit v1.2.3


From 229fd8ffba57dfaea59078b9144371369ffdb0a3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:57 +0100
Subject: ARM: S3C24XX: Add FIQ IRQ routing support

Add support for routing an IRQ from the normal ARM IRQ mechanism to the
FIQ input of the processor.

Note, also fix a bug where the init_FIQ() function has not been called
when CONFIG_FIQ is enabled.

Signed-off-by; Ben Dooks <ben@simtec.co.uk>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/include/plat/fiq.h | 13 ++++++++++++
 arch/arm/plat-s3c24xx/irq.c              | 36 ++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/fiq.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 00000000000..8521b8372c5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad..d02f5f02045 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
 	}
 }
 
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+#endif
+
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
 	int irqno;
 	int i;
 
+#ifdef CONFIG_FIQ
+	init_FIQ();
+#endif
+
 	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
 
 	/* first, clear all interrupts pending... */
-- 
cgit v1.2.3


From d91e9a7ab93e09e5a0fbed73f3a6a330f14620a4 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:29:57 +0100
Subject: ARM: S3C24XX: Add platform device for AC97 controller

Move the definition of the "generic" IRQ in the process.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h |  6 ++++
 arch/arm/plat-s3c/include/plat/devs.h     |  1 +
 arch/arm/plat-s3c24xx/devs.c              | 50 +++++++++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b..6c12c6312ad 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..2e6599411c2 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -56,5 +56,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 #ifdef CONFIG_CPU_S3C2440
 
 extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
 
 #endif
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..4553ad6c7ad 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
@@ -473,4 +475,52 @@ struct platform_device s3c_device_camif = {
 
 EXPORT_SYMBOL(s3c_device_camif);
 
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+	[0] = {
+		.start = S3C2440_PA_AC97,
+		.end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3C244x_AC97,
+		.end   = IRQ_S3C244x_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name  = "PCM out",
+		.start = DMACH_PCM_OUT,
+		.end   = DMACH_PCM_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.name  = "PCM in",
+		.start = DMACH_PCM_IN,
+		.end   = DMACH_PCM_IN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.name  = "Mic in",
+		.start = DMACH_MIC_IN,
+		.end   = DMACH_MIC_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
+	.resource	  = s3c_ac97_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
 #endif // CONFIG_CPU_S32440
-- 
cgit v1.2.3


From a2c195fdde20772a90ee98ce3523dcfbda49eee6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:50 +0100
Subject: ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10

Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the
correct GPIO configuration register definitions in regs-gpio.h

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-gpio.h |  4 ++-
 arch/arm/mach-s3c2410/include/mach/spi.h       |  3 ++
 arch/arm/plat-s3c24xx/Kconfig                  |  6 ++++
 arch/arm/plat-s3c24xx/Makefile                 |  1 +
 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c     | 38 ++++++++++++++++++++++++++
 5 files changed, 51 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c45cc..f6e8eec879c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
 
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
 
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
 
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
+#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
 
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb112b..193b39d654e 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 					      int enable);
 
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					       int enable);
+
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..aaae456018b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -105,6 +105,12 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 	  SPI GPIO configuration code for BUS 1 when connected to
 	  GPG5, GPG6 and GPG7.
 
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+	bool
+	help
+	  SPI GPIO configuration code for BUS 1 when connected to
+	  GPD8, GPD9 and GPD10.
+
 # common code for s3c24xx based machines, such as the SMDKs.
 
 config MACH_SMDK
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..59416796fb1 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 
 obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
 obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 
 # machine common support
 
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 00000000000..89fcf5308cf
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					int enable)
+{
+
+	printk(KERN_INFO "%s(%d)\n", __func__, enable);
+	if (enable) {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+	} else {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+	}
+}
-- 
cgit v1.2.3


From 74d46d6b2d23d44d72c37df4c6a5d2e782f7b088 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 21 Jul 2009 17:11:50 +0900
Subject: percpu, sparc64: fix sparse possible cpu map handling

percpu code has been assuming num_possible_cpus() == nr_cpu_ids which
is incorrect if cpu_possible_map contains holes.  This causes percpu
code to access beyond allocated memories and vmalloc areas.  On a
sparc64 machine with cpus 0 and 2 (u60), this triggers the following
warning or fails boot.

 WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240()
 Modules linked in:
 Call Trace:
  [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240
  [00000000004b1840] map_vm_area+0x20/0x60
  [00000000004b1950] __vmalloc_area_node+0xd0/0x160
  [0000000000593434] deflate_init+0x14/0xe0
  [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0
  [00000000005844f0] crypto_alloc_base+0x50/0xa0
  [000000000058b898] alg_test_comp+0x18/0x80
  [000000000058dad4] alg_test+0x54/0x180
  [000000000058af00] cryptomgr_test+0x40/0x60
  [0000000000473098] kthread+0x58/0x80
  [000000000042b590] kernel_thread+0x30/0x60
  [0000000000472fd0] kthreadd+0xf0/0x160
 ---[ end trace 429b268a213317ba ]---

This patch fixes generic percpu functions and sparc64
setup_per_cpu_areas() so that they handle sparse cpu_possible_map
properly.

Please note that on x86, cpu_possible_map() doesn't contain holes and
thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause
any behavior difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/smp_64.c     |  4 ++--
 arch/x86/kernel/setup_percpu.c | 14 +++++++-------
 2 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index fa44eaf8d89..3691907a43b 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1499,7 +1499,7 @@ void __init setup_per_cpu_areas(void)
 	dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
 
 
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
+	ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpur_ptrs[0]));
 	pcpur_ptrs = alloc_bootmem(ptrs_size);
 
 	for_each_possible_cpu(cpu) {
@@ -1514,7 +1514,7 @@ void __init setup_per_cpu_areas(void)
 
 	/* allocate address and map */
 	vm.flags = VM_ALLOC;
-	vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE;
+	vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE;
 	vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
 
 	for_each_possible_cpu(cpu) {
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 29a3eef7cf4..07d81916f21 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -165,7 +165,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
-		size_t tot_size = num_possible_cpus() * PMD_SIZE;
+		size_t tot_size = nr_cpu_ids * PMD_SIZE;
 
 		/* on non-NUMA, embedding is better */
 		if (!pcpu_need_numa())
@@ -199,7 +199,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	/* allocate pointer array and alloc large pages */
-	map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
+	map_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpul_map[0]));
 	pcpul_map = alloc_bootmem(map_size);
 
 	for_each_possible_cpu(cpu) {
@@ -228,7 +228,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 
 	/* allocate address and map */
 	pcpul_vm.flags = VM_ALLOC;
-	pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
+	pcpul_vm.size = nr_cpu_ids * PMD_SIZE;
 	vm_area_register_early(&pcpul_vm, PMD_SIZE);
 
 	for_each_possible_cpu(cpu) {
@@ -250,8 +250,8 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 				     PMD_SIZE, pcpul_vm.addr, NULL);
 
 	/* sort pcpul_map array for pcpu_lpage_remapped() */
-	for (i = 0; i < num_possible_cpus() - 1; i++)
-		for (j = i + 1; j < num_possible_cpus(); j++)
+	for (i = 0; i < nr_cpu_ids - 1; i++)
+		for (j = i + 1; j < nr_cpu_ids; j++)
 			if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
 				struct pcpul_ent tmp = pcpul_map[i];
 				pcpul_map[i] = pcpul_map[j];
@@ -288,7 +288,7 @@ void *pcpu_lpage_remapped(void *kaddr)
 {
 	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
 	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
-	int left = 0, right = num_possible_cpus() - 1;
+	int left = 0, right = nr_cpu_ids - 1;
 	int pos;
 
 	/* pcpul in use at all? */
@@ -377,7 +377,7 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 	pcpu4k_nr_static_pages = PFN_UP(static_size);
 
 	/* unaligned allocations can't be freed, round up to page size */
-	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
+	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * nr_cpu_ids
 			       * sizeof(pcpu4k_pages[0]));
 	pcpu4k_pages = alloc_bootmem(pages_size);
 
-- 
cgit v1.2.3


From 00ae4064b1445524752575dd84df227c0687c99d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:49 +0900
Subject: percpu: rename 4k first chunk allocator to page

Page size isn't always 4k depending on arch and configuration.  Rename
4k first chunk allocator to page.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Howells <dhowells@redhat.com>
---
 arch/x86/kernel/setup_percpu.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index a26ff61e2fb..1e17711c29d 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -249,21 +249,22 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 }
 
 /*
- * 4k allocator
+ * Page allocator
  *
- * Boring fallback 4k allocator.  This allocator puts more pressure on
- * PTE TLBs but other than that behaves nicely on both UMA and NUMA.
+ * Boring fallback 4k page allocator.  This allocator puts more
+ * pressure on PTE TLBs but other than that behaves nicely on both UMA
+ * and NUMA.
  */
-static void __init pcpu4k_populate_pte(unsigned long addr)
+static void __init pcpup_populate_pte(unsigned long addr)
 {
 	populate_extra_pte(addr);
 }
 
-static ssize_t __init setup_pcpu_4k(size_t static_size)
+static ssize_t __init setup_pcpu_page(size_t static_size)
 {
-	return pcpu_4k_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				   pcpu_fc_alloc, pcpu_fc_free,
-				   pcpu4k_populate_pte);
+	return pcpu_page_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				     pcpu_fc_alloc, pcpu_fc_free,
+				     pcpup_populate_pte);
 }
 
 /* for explicit first chunk allocator selection */
@@ -307,7 +308,7 @@ void __init setup_per_cpu_areas(void)
 	 */
 	ret = -EINVAL;
 	if (strlen(pcpu_chosen_alloc)) {
-		if (strcmp(pcpu_chosen_alloc, "4k")) {
+		if (strcmp(pcpu_chosen_alloc, "page")) {
 			if (!strcmp(pcpu_chosen_alloc, "lpage"))
 				ret = setup_pcpu_lpage(static_size, true);
 			else if (!strcmp(pcpu_chosen_alloc, "embed"))
@@ -317,7 +318,7 @@ void __init setup_per_cpu_areas(void)
 					   "specified\n", pcpu_chosen_alloc);
 			if (ret < 0)
 				pr_warning("PERCPU: %s allocator failed (%zd), "
-					   "falling back to 4k\n",
+					   "falling back to page size\n",
 					   pcpu_chosen_alloc, ret);
 		}
 	} else {
@@ -326,7 +327,7 @@ void __init setup_per_cpu_areas(void)
 			ret = setup_pcpu_embed(static_size, false);
 	}
 	if (ret < 0)
-		ret = setup_pcpu_4k(static_size);
+		ret = setup_pcpu_page(static_size);
 	if (ret < 0)
 		panic("cannot allocate static percpu area (%zu bytes, err=%zd)",
 		      static_size, ret);
-- 
cgit v1.2.3


From 08fc45806103e59a37418e84719b878f9bb32540 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:49 +0900
Subject: percpu: build first chunk allocators selectively

There's no need to build unused first chunk allocators in.  Define
CONFIG_NEED_PER_CPU_*_FIRST_CHUNK and let archs enable them
selectively.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/Kconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e06b2eeff9f..f7ac2721551 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -150,6 +150,16 @@ config ARCH_HAS_CACHE_LINE_SIZE
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+	def_bool y
+
+config NEED_PER_CPU_LPAGE_FIRST_CHUNK
+	def_bool y
+	depends on NEED_MULTIPLE_NODES
+
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
-- 
cgit v1.2.3


From f58dc01ba2ca9fe3ab2ba4ca43d9c8a735cf62d8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:50 +0900
Subject: percpu: generalize first chunk allocator selection

Now that all first chunk allocators are in mm/percpu.c, it makes sense
to make generalize percpu_alloc kernel parameter.  Define PCPU_FC_*
and set pcpu_chosen_fc using early_param() in mm/percpu.c.  Arch code
can use the set value to determine which first chunk allocator to use.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 1e17711c29d..b961d99e641 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -267,16 +267,6 @@ static ssize_t __init setup_pcpu_page(size_t static_size)
 				     pcpup_populate_pte);
 }
 
-/* for explicit first chunk allocator selection */
-static char pcpu_chosen_alloc[16] __initdata;
-
-static int __init percpu_alloc_setup(char *str)
-{
-	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
-	return 0;
-}
-early_param("percpu_alloc", percpu_alloc_setup);
-
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -307,19 +297,17 @@ void __init setup_per_cpu_areas(void)
 	 * each allocator for details.
 	 */
 	ret = -EINVAL;
-	if (strlen(pcpu_chosen_alloc)) {
-		if (strcmp(pcpu_chosen_alloc, "page")) {
-			if (!strcmp(pcpu_chosen_alloc, "lpage"))
+	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
+		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
 				ret = setup_pcpu_lpage(static_size, true);
-			else if (!strcmp(pcpu_chosen_alloc, "embed"))
-				ret = setup_pcpu_embed(static_size, true);
 			else
-				pr_warning("PERCPU: unknown allocator %s "
-					   "specified\n", pcpu_chosen_alloc);
+				ret = setup_pcpu_embed(static_size, true);
+
 			if (ret < 0)
 				pr_warning("PERCPU: %s allocator failed (%zd), "
 					   "falling back to page size\n",
-					   pcpu_chosen_alloc, ret);
+					   pcpu_fc_names[pcpu_chosen_fc], ret);
 		}
 	} else {
 		ret = setup_pcpu_lpage(static_size, false);
-- 
cgit v1.2.3


From 9a7737691e90d3cce0e5248f91826c50e5aa3fcf Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:50 +0900
Subject: percpu: drop @static_size from first chunk allocators

First chunk allocators assume percpu areas have been linked using one
of PERCPU_*() macros and depend on __per_cpu_load symbol defined by
those macros, so there isn't much point in passing in static area size
explicitly when it can be easily calculated from __per_cpu_start and
__per_cpu_end.  Drop @static_size from all percpu first chunk
allocators and helpers.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index b961d99e641..8aad486c688 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -157,7 +157,7 @@ static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
 		return REMOTE_DISTANCE;
 }
 
-static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
+static ssize_t __init setup_pcpu_lpage(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
@@ -184,8 +184,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 		return -ENOMEM;
 	}
 
-	ret = pcpu_lpage_build_unit_map(static_size,
-					PERCPU_FIRST_CHUNK_RESERVE,
+	ret = pcpu_lpage_build_unit_map(PERCPU_FIRST_CHUNK_RESERVE,
 					&dyn_size, &unit_size, PMD_SIZE,
 					unit_map, pcpu_lpage_cpu_distance);
 	if (ret < 0) {
@@ -208,9 +207,8 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 		}
 	}
 
-	ret = pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				     dyn_size, unit_size, PMD_SIZE,
-				     unit_map, nr_units,
+	ret = pcpu_lpage_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
+				     unit_size, PMD_SIZE, unit_map, nr_units,
 				     pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
 out_free:
 	if (ret < 0)
@@ -218,7 +216,7 @@ out_free:
 	return ret;
 }
 #else
-static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
+static ssize_t __init setup_pcpu_lpage(bool chosen)
 {
 	return -EINVAL;
 }
@@ -232,7 +230,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
+static ssize_t __init setup_pcpu_embed(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -244,7 +242,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
 		return -EINVAL;
 
-	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+	return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 				      reserve - PERCPU_FIRST_CHUNK_RESERVE);
 }
 
@@ -260,9 +258,9 @@ static void __init pcpup_populate_pte(unsigned long addr)
 	populate_extra_pte(addr);
 }
 
-static ssize_t __init setup_pcpu_page(size_t static_size)
+static ssize_t __init setup_pcpu_page(void)
 {
-	return pcpu_page_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+	return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 				     pcpu_fc_alloc, pcpu_fc_free,
 				     pcpup_populate_pte);
 }
@@ -282,7 +280,6 @@ static inline void setup_percpu_segment(int cpu)
 
 void __init setup_per_cpu_areas(void)
 {
-	size_t static_size = __per_cpu_end - __per_cpu_start;
 	unsigned int cpu;
 	unsigned long delta;
 	size_t pcpu_unit_size;
@@ -300,9 +297,9 @@ void __init setup_per_cpu_areas(void)
 	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
 		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
 			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
-				ret = setup_pcpu_lpage(static_size, true);
+				ret = setup_pcpu_lpage(true);
 			else
-				ret = setup_pcpu_embed(static_size, true);
+				ret = setup_pcpu_embed(true);
 
 			if (ret < 0)
 				pr_warning("PERCPU: %s allocator failed (%zd), "
@@ -310,15 +307,14 @@ void __init setup_per_cpu_areas(void)
 					   pcpu_fc_names[pcpu_chosen_fc], ret);
 		}
 	} else {
-		ret = setup_pcpu_lpage(static_size, false);
+		ret = setup_pcpu_lpage(false);
 		if (ret < 0)
-			ret = setup_pcpu_embed(static_size, false);
+			ret = setup_pcpu_embed(false);
 	}
 	if (ret < 0)
-		ret = setup_pcpu_page(static_size);
+		ret = setup_pcpu_page();
 	if (ret < 0)
-		panic("cannot allocate static percpu area (%zu bytes, err=%zd)",
-		      static_size, ret);
+		panic("cannot initialize percpu area (err=%zd)", ret);
 
 	pcpu_unit_size = ret;
 
-- 
cgit v1.2.3


From 3cbc85652767c38b252c8de55f9fd180b29e4c0d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:50 +0900
Subject: percpu: add @align to pcpu_fc_alloc_fn_t

pcpu_fc_alloc_fn_t is about to see more interesting usage, add @align
parameter.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 8aad486c688..660cde13314 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -126,9 +126,9 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 /*
  * Helpers for first chunk memory allocation
  */
-static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size)
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
 {
-	return pcpu_alloc_bootmem(cpu, size, size);
+	return pcpu_alloc_bootmem(cpu, size, align);
 }
 
 static void __init pcpu_fc_free(void *ptr, size_t size)
-- 
cgit v1.2.3


From fd1e8a1fe2b54df6c185b4fa65f181f50b9c4d4e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:51 +0900
Subject: percpu: introduce pcpu_alloc_info and pcpu_group_info

Till now, non-linear cpu->unit map was expressed using an integer
array which maps each cpu to a unit and used only by lpage allocator.
Although how many units have been placed in a single contiguos area
(group) is known while building unit_map, the information is lost when
the result is recorded into the unit_map array.  For lpage allocator,
as all allocations are done by lpages and whether two adjacent lpages
are in the same group or not is irrelevant, this didn't cause any
problem.  Non-linear cpu->unit mapping will be used for sparse
embedding and this grouping information is necessary for that.

This patch introduces pcpu_alloc_info which contains all the
information necessary for initializing percpu allocator.
pcpu_alloc_info contains array of pcpu_group_info which describes how
units are grouped and mapped to cpus.  pcpu_group_info also has
base_offset field to specify its offset from the chunk's base address.
pcpu_build_alloc_info() initializes this field as if all groups are
allocated back-to-back as is currently done but this will be used to
sparsely place groups.

pcpu_alloc_info is a rather complex data structure which contains a
flexible array which in turn points to nested cpu_map arrays.

* pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to
  help dealing with pcpu_alloc_info.

* pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info,
  generalized and renamed to pcpu_build_alloc_info().
  @cpu_distance_fn may be NULL indicating that all cpus are of
  LOCAL_DISTANCE.

* pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info,
  generalized and renamed to pcpu_dump_alloc_info().  It now also
  prints which group each alloc unit belongs to.

* pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the
  separate parameters.  All first chunk allocators are updated to use
  pcpu_build_alloc_info() to build alloc_info and call
  pcpu_setup_first_chunk() with it.  This has the side effect of
  packing units for sparse possible cpus.  ie. if cpus 0, 2 and 4 are
  possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4.

* x86 setup_pcpu_lpage() is updated to deal with alloc_info.

* sparc64 setup_per_cpu_areas() is updated to build alloc_info.

Although the changes made by this patch are pretty pervasive, it
doesn't cause any behavior difference other than packing of sparse
cpus.  It mostly changes how information is passed among
initialization functions and makes room for more flexibility.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c     | 24 +++++++++++++++++-------
 arch/x86/kernel/setup_percpu.c | 38 +++++++++++++++-----------------------
 2 files changed, 32 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 9856d866b77..a42a4a744d1 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1475,17 +1475,29 @@ static void __init pcpu_map_range(unsigned long start, unsigned long end,
 
 void __init setup_per_cpu_areas(void)
 {
-	size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start;
 	static struct vm_struct vm;
+	struct pcpu_alloc_info *ai;
 	unsigned long delta, cpu;
 	size_t size_sum, pcpu_unit_size;
 	size_t ptrs_size;
 	void **ptrs;
 
-	size_sum = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+	ai = pcpu_alloc_alloc_info(1, nr_cpu_ids);
+
+	ai->static_size = __per_cpu_end - __per_cpu_start;
+	ai->reserved_size = PERCPU_MODULE_RESERVE;
+
+	size_sum = PFN_ALIGN(ai->static_size + ai->reserved_size +
 			     PERCPU_DYNAMIC_RESERVE);
-	dyn_size = size_sum - static_size - PERCPU_MODULE_RESERVE;
 
+	ai->dyn_size = size_sum - ai->static_size - ai->reserved_size;
+	ai->unit_size = PCPU_CHUNK_SIZE;
+	ai->atom_size = PCPU_CHUNK_SIZE;
+	ai->alloc_size = PCPU_CHUNK_SIZE;
+	ai->groups[0].nr_units = nr_cpu_ids;
+
+	for_each_possible_cpu(cpu)
+		ai->groups[0].cpu_map[cpu] = cpu;
 
 	ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(ptrs[0]));
 	ptrs = alloc_bootmem(ptrs_size);
@@ -1497,7 +1509,7 @@ void __init setup_per_cpu_areas(void)
 		free_bootmem(__pa(ptrs[cpu] + size_sum),
 			     PCPU_CHUNK_SIZE - size_sum);
 
-		memcpy(ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(ptrs[cpu], __per_cpu_load, ai->static_size);
 	}
 
 	/* allocate address and map */
@@ -1514,9 +1526,7 @@ void __init setup_per_cpu_areas(void)
 		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
 	}
 
-	pcpu_unit_size = pcpu_setup_first_chunk(static_size,
-						PERCPU_MODULE_RESERVE, dyn_size,
-						PCPU_CHUNK_SIZE, vm.addr, NULL);
+	pcpu_unit_size = pcpu_setup_first_chunk(ai, vm.addr);
 
 	free_bootmem(__pa(ptrs), ptrs_size);
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 660cde13314..db5f9c49fec 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -161,9 +161,7 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
-	size_t unit_map_size, unit_size;
-	int *unit_map;
-	int nr_units;
+	struct pcpu_alloc_info *ai;
 	ssize_t ret;
 
 	/* on non-NUMA, embedding is better */
@@ -177,26 +175,22 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 	}
 
 	/* allocate and build unit_map */
-	unit_map_size = nr_cpu_ids * sizeof(int);
-	unit_map = alloc_bootmem_nopanic(unit_map_size);
-	if (!unit_map) {
-		pr_warning("PERCPU: failed to allocate unit_map\n");
-		return -ENOMEM;
+	ai = pcpu_build_alloc_info(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
+				   PMD_SIZE, pcpu_lpage_cpu_distance);
+	if (IS_ERR(ai)) {
+		pr_warning("PERCPU: failed to build unit_map (%ld)\n",
+			   PTR_ERR(ai));
+		return PTR_ERR(ai);
 	}
 
-	ret = pcpu_lpage_build_unit_map(PERCPU_FIRST_CHUNK_RESERVE,
-					&dyn_size, &unit_size, PMD_SIZE,
-					unit_map, pcpu_lpage_cpu_distance);
-	if (ret < 0) {
-		pr_warning("PERCPU: failed to build unit_map\n");
-		goto out_free;
-	}
-	nr_units = ret;
-
 	/* do the parameters look okay? */
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
-		size_t tot_size = nr_units * unit_size;
+		size_t tot_size = 0;
+		int group;
+
+		for (group = 0; group < ai->nr_groups; group++)
+			tot_size += ai->unit_size * ai->groups[group].nr_units;
 
 		/* don't consume more than 20% of vmalloc area */
 		if (tot_size > vm_size / 5) {
@@ -207,12 +201,10 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 		}
 	}
 
-	ret = pcpu_lpage_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     unit_size, PMD_SIZE, unit_map, nr_units,
-				     pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
+	ret = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free,
+				     pcpul_map);
 out_free:
-	if (ret < 0)
-		free_bootmem(__pa(unit_map), unit_map_size);
+	pcpu_free_alloc_info(ai);
 	return ret;
 }
 #else
-- 
cgit v1.2.3


From fb435d5233f8b6f9b93c11d6304d8e98fed03234 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:51 +0900
Subject: percpu: add pcpu_unit_offsets[]

Currently units are mapped sequentially into address space.  This
patch adds pcpu_unit_offsets[] which allows units to be mapped to
arbitrary offsets from the chunk base address.  This is necessary to
allow sparse embedding which might would need to allocate address
ranges and memory areas which aren't aligned to unit size but
allocation atom size (page or large page size).  This also simplifies
things a bit by removing the need to calculate offset from unit
number.

With this change, there's no need for the arch code to know
pcpu_unit_size.  Update pcpu_setup_first_chunk() and first chunk
allocators to return regular 0 or -errno return code instead of unit
size or -errno.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c     | 12 +++++-----
 arch/x86/kernel/setup_percpu.c | 51 +++++++++++++++++++-----------------------
 2 files changed, 30 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index a42a4a744d1..b03fd362c62 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1478,9 +1478,10 @@ void __init setup_per_cpu_areas(void)
 	static struct vm_struct vm;
 	struct pcpu_alloc_info *ai;
 	unsigned long delta, cpu;
-	size_t size_sum, pcpu_unit_size;
+	size_t size_sum;
 	size_t ptrs_size;
 	void **ptrs;
+	int rc;
 
 	ai = pcpu_alloc_alloc_info(1, nr_cpu_ids);
 
@@ -1526,14 +1527,15 @@ void __init setup_per_cpu_areas(void)
 		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
 	}
 
-	pcpu_unit_size = pcpu_setup_first_chunk(ai, vm.addr);
+	rc = pcpu_setup_first_chunk(ai, vm.addr);
+	if (rc)
+		panic("failed to setup percpu first chunk (%d)", rc);
 
 	free_bootmem(__pa(ptrs), ptrs_size);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
-	for_each_possible_cpu(cpu) {
-		__per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
-	}
+	for_each_possible_cpu(cpu)
+		__per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu];
 
 	/* Setup %g5 for the boot cpu.  */
 	__local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index db5f9c49fec..9becc5d4b51 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -157,12 +157,12 @@ static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
 		return REMOTE_DISTANCE;
 }
 
-static ssize_t __init setup_pcpu_lpage(bool chosen)
+static int __init setup_pcpu_lpage(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
 	struct pcpu_alloc_info *ai;
-	ssize_t ret;
+	int rc;
 
 	/* on non-NUMA, embedding is better */
 	if (!chosen && !pcpu_need_numa())
@@ -196,19 +196,18 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 		if (tot_size > vm_size / 5) {
 			pr_info("PERCPU: too large chunk size %zuMB for "
 				"large page remap\n", tot_size >> 20);
-			ret = -EINVAL;
+			rc = -EINVAL;
 			goto out_free;
 		}
 	}
 
-	ret = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free,
-				     pcpul_map);
+	rc = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
 out_free:
 	pcpu_free_alloc_info(ai);
-	return ret;
+	return rc;
 }
 #else
-static ssize_t __init setup_pcpu_lpage(bool chosen)
+static int __init setup_pcpu_lpage(bool chosen)
 {
 	return -EINVAL;
 }
@@ -222,7 +221,7 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(bool chosen)
+static int __init setup_pcpu_embed(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -250,7 +249,7 @@ static void __init pcpup_populate_pte(unsigned long addr)
 	populate_extra_pte(addr);
 }
 
-static ssize_t __init setup_pcpu_page(void)
+static int __init setup_pcpu_page(void)
 {
 	return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 				     pcpu_fc_alloc, pcpu_fc_free,
@@ -274,8 +273,7 @@ void __init setup_per_cpu_areas(void)
 {
 	unsigned int cpu;
 	unsigned long delta;
-	size_t pcpu_unit_size;
-	ssize_t ret;
+	int rc;
 
 	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
@@ -285,36 +283,33 @@ void __init setup_per_cpu_areas(void)
 	 * of large page mappings.  Please read comments on top of
 	 * each allocator for details.
 	 */
-	ret = -EINVAL;
+	rc = -EINVAL;
 	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
 		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
 			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
-				ret = setup_pcpu_lpage(true);
+				rc = setup_pcpu_lpage(true);
 			else
-				ret = setup_pcpu_embed(true);
+				rc = setup_pcpu_embed(true);
 
-			if (ret < 0)
-				pr_warning("PERCPU: %s allocator failed (%zd), "
+			if (rc < 0)
+				pr_warning("PERCPU: %s allocator failed (%d), "
 					   "falling back to page size\n",
-					   pcpu_fc_names[pcpu_chosen_fc], ret);
+					   pcpu_fc_names[pcpu_chosen_fc], rc);
 		}
 	} else {
-		ret = setup_pcpu_lpage(false);
-		if (ret < 0)
-			ret = setup_pcpu_embed(false);
+		rc = setup_pcpu_lpage(false);
+		if (rc < 0)
+			rc = setup_pcpu_embed(false);
 	}
-	if (ret < 0)
-		ret = setup_pcpu_page();
-	if (ret < 0)
-		panic("cannot initialize percpu area (err=%zd)", ret);
-
-	pcpu_unit_size = ret;
+	if (rc < 0)
+		rc = setup_pcpu_page();
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
 
 	/* alrighty, percpu areas up and running */
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu) {
-		per_cpu_offset(cpu) =
-			delta + pcpu_unit_map[cpu] * pcpu_unit_size;
+		per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu];
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
 		setup_percpu_segment(cpu);
-- 
cgit v1.2.3


From c8826dd538602d730ed2c18c6753f1bbfa6c4933 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:52 +0900
Subject: percpu: update embedding first chunk allocator to handle sparse units

Now that percpu core can handle very sparse units, given that vmalloc
space is large enough, embedding first chunk allocator can use any
memory to build the first chunk.  This patch teaches
pcpu_embed_first_chunk() about distances between cpus and to use
alloc/free callbacks to allocate node specific areas for each group
and use them for the first chunk.

This brings the benefits of embedding allocator to NUMA configurations
- no extra TLB pressure with the flexibility of unified dynamic
allocator and no need to restructure arch code to build memory layout
suitable for percpu.  With units put into atom_size aligned groups
according to cpu distances, using large page for dynamic chunks is
also easily possible with falling back to reuglar pages if large
allocation fails.

Embedding allocator users are converted to specify NULL
cpu_distance_fn, so this patch doesn't cause any visible behavior
difference.  Following patches will convert them.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9becc5d4b51..67f6314de9f 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -234,7 +234,9 @@ static int __init setup_pcpu_embed(bool chosen)
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE);
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
+				      PAGE_SIZE, NULL, pcpu_fc_alloc,
+				      pcpu_fc_free);
 }
 
 /*
-- 
cgit v1.2.3


From 4518e6a0c038b98be4c480e6f4481e8676bd15dd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:52 +0900
Subject: x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA

Embedding percpu first chunk allocator can now handle very sparse unit
mapping.  Use embedding allocator instead of lpage for 64bit NUMA.
This removes extra TLB pressure and the need to do complex and fragile
dancing when changing page attributes.

For 32bit, using very sparse unit mapping isn't a good idea because
the vmalloc space is very constrained.  32bit NUMA machines aren't
exactly the focus of optimization and it isn't very clear whether
lpage performs better than page.  Use page first chunk allocator for
32bit NUMAs.

As this leaves setup_pcpu_*() functions pretty much empty, fold them
into setup_per_cpu_areas().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
---
 arch/x86/Kconfig               |   4 --
 arch/x86/kernel/setup_percpu.c | 155 ++++++++---------------------------------
 2 files changed, 28 insertions(+), 131 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f7ac2721551..869d7d30144 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -156,10 +156,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
 config NEED_PER_CPU_PAGE_FIRST_CHUNK
 	def_bool y
 
-config NEED_PER_CPU_LPAGE_FIRST_CHUNK
-	def_bool y
-	depends on NEED_MULTIPLE_NODES
-
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 67f6314de9f..d559af913e1 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -55,6 +55,7 @@ EXPORT_SYMBOL(__per_cpu_offset);
 #define PERCPU_FIRST_CHUNK_RESERVE	0
 #endif
 
+#ifdef CONFIG_X86_32
 /**
  * pcpu_need_numa - determine percpu allocation needs to consider NUMA
  *
@@ -83,6 +84,7 @@ static bool __init pcpu_need_numa(void)
 #endif
 	return false;
 }
+#endif
 
 /**
  * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
@@ -136,128 +138,23 @@ static void __init pcpu_fc_free(void *ptr, size_t size)
 	free_bootmem(__pa(ptr), size);
 }
 
-/*
- * Large page remapping allocator
- */
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-static void __init pcpul_map(void *ptr, size_t size, void *addr)
-{
-	pmd_t *pmd, pmd_v;
-
-	pmd = populate_extra_pmd((unsigned long)addr);
-	pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE);
-	set_pmd(pmd, pmd_v);
-}
-
-static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
 {
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 	if (early_cpu_to_node(from) == early_cpu_to_node(to))
 		return LOCAL_DISTANCE;
 	else
 		return REMOTE_DISTANCE;
-}
-
-static int __init setup_pcpu_lpage(bool chosen)
-{
-	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
-	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
-	struct pcpu_alloc_info *ai;
-	int rc;
-
-	/* on non-NUMA, embedding is better */
-	if (!chosen && !pcpu_need_numa())
-		return -EINVAL;
-
-	/* need PSE */
-	if (!cpu_has_pse) {
-		pr_warning("PERCPU: lpage allocator requires PSE\n");
-		return -EINVAL;
-	}
-
-	/* allocate and build unit_map */
-	ai = pcpu_build_alloc_info(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				   PMD_SIZE, pcpu_lpage_cpu_distance);
-	if (IS_ERR(ai)) {
-		pr_warning("PERCPU: failed to build unit_map (%ld)\n",
-			   PTR_ERR(ai));
-		return PTR_ERR(ai);
-	}
-
-	/* do the parameters look okay? */
-	if (!chosen) {
-		size_t vm_size = VMALLOC_END - VMALLOC_START;
-		size_t tot_size = 0;
-		int group;
-
-		for (group = 0; group < ai->nr_groups; group++)
-			tot_size += ai->unit_size * ai->groups[group].nr_units;
-
-		/* don't consume more than 20% of vmalloc area */
-		if (tot_size > vm_size / 5) {
-			pr_info("PERCPU: too large chunk size %zuMB for "
-				"large page remap\n", tot_size >> 20);
-			rc = -EINVAL;
-			goto out_free;
-		}
-	}
-
-	rc = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
-out_free:
-	pcpu_free_alloc_info(ai);
-	return rc;
-}
 #else
-static int __init setup_pcpu_lpage(bool chosen)
-{
-	return -EINVAL;
-}
+	return LOCAL_DISTANCE;
 #endif
-
-/*
- * Embedding allocator
- *
- * The first chunk is sized to just contain the static area plus
- * module and dynamic reserves and embedded into linear physical
- * mapping so that it can use PMD mapping without additional TLB
- * pressure.
- */
-static int __init setup_pcpu_embed(bool chosen)
-{
-	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
-
-	/*
-	 * If large page isn't supported, there's no benefit in doing
-	 * this.  Also, embedding allocation doesn't play well with
-	 * NUMA.
-	 */
-	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
-		return -EINVAL;
-
-	return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
-				      PAGE_SIZE, NULL, pcpu_fc_alloc,
-				      pcpu_fc_free);
 }
 
-/*
- * Page allocator
- *
- * Boring fallback 4k page allocator.  This allocator puts more
- * pressure on PTE TLBs but other than that behaves nicely on both UMA
- * and NUMA.
- */
 static void __init pcpup_populate_pte(unsigned long addr)
 {
 	populate_extra_pte(addr);
 }
 
-static int __init setup_pcpu_page(void)
-{
-	return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
-				     pcpu_fc_alloc, pcpu_fc_free,
-				     pcpup_populate_pte);
-}
-
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -281,30 +178,34 @@ void __init setup_per_cpu_areas(void)
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
 
 	/*
-	 * Allocate percpu area.  If PSE is supported, try to make use
-	 * of large page mappings.  Please read comments on top of
-	 * each allocator for details.
+	 * Allocate percpu area.  Embedding allocator is our favorite;
+	 * however, on NUMA configurations, it can result in very
+	 * sparse unit mapping and vmalloc area isn't spacious enough
+	 * on 32bit.  Use page in that case.
 	 */
+#ifdef CONFIG_X86_32
+	if (pcpu_chosen_fc == PCPU_FC_AUTO && pcpu_need_numa())
+		pcpu_chosen_fc = PCPU_FC_PAGE;
+#endif
 	rc = -EINVAL;
-	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
-		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
-			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
-				rc = setup_pcpu_lpage(true);
-			else
-				rc = setup_pcpu_embed(true);
-
-			if (rc < 0)
-				pr_warning("PERCPU: %s allocator failed (%d), "
-					   "falling back to page size\n",
-					   pcpu_fc_names[pcpu_chosen_fc], rc);
-		}
-	} else {
-		rc = setup_pcpu_lpage(false);
+	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+		const size_t atom_size = cpu_has_pse ? PMD_SIZE : PAGE_SIZE;
+		const size_t dyn_size = PERCPU_MODULE_RESERVE +
+			PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE;
+
+		rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
+					    dyn_size, atom_size,
+					    pcpu_cpu_distance,
+					    pcpu_fc_alloc, pcpu_fc_free);
 		if (rc < 0)
-			rc = setup_pcpu_embed(false);
+			pr_warning("PERCPU: %s allocator failed (%d), "
+				   "falling back to page size\n",
+				   pcpu_fc_names[pcpu_chosen_fc], rc);
 	}
 	if (rc < 0)
-		rc = setup_pcpu_page();
+		rc = pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
+					   pcpu_fc_alloc, pcpu_fc_free,
+					   pcpup_populate_pte);
 	if (rc < 0)
 		panic("cannot initialize percpu area (err=%d)", rc);
 
-- 
cgit v1.2.3


From e933a73f48e3b2d40cfa56d81e2646f194b5a66a Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:53 +0900
Subject: percpu: kill lpage first chunk allocator

With x86 converted to embedding allocator, lpage doesn't have any user
left.  Kill it along with cpa handling code.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
---
 arch/x86/mm/pageattr.c | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index dce282f6570..f53cfc7f963 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -687,7 +687,7 @@ static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
 	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
-	unsigned long vaddr, remapped;
+	unsigned long vaddr;
 	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
@@ -745,24 +745,6 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	}
 #endif
 
-	/*
-	 * If the PMD page was partially used for per-cpu remapping,
-	 * the recycled area needs to be split and modified.  Because
-	 * the area is always proper subset of a PMD page
-	 * cpa->numpages is guaranteed to be 1 for these areas, so
-	 * there's no need to loop over and check for further remaps.
-	 */
-	remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
-	if (remapped) {
-		WARN_ON(cpa->numpages > 1);
-		alias_cpa = *cpa;
-		alias_cpa.vaddr = &remapped;
-		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
-		ret = __change_page_attr_set_clr(&alias_cpa, 0);
-		if (ret)
-			return ret;
-	}
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From bcb2107fdbecef3de55d597d23453747af81ba88 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:53 +0900
Subject: sparc64: use embedding percpu first chunk allocator

sparc64 currently allocates a large page for each cpu and partially
remap them into vmalloc area much like what lpage first chunk
allocator did.  As a 4M page is used for each cpu, this results in
very large unit size and also adds TLB pressure due to the double
mapping of pages in the first chunk.

This patch converts sparc64 to use the embedding percpu first chunk
allocator which now knows how to handle NUMA configurations.  This
simplifies the code a lot, doesn't incur any extra TLB pressure and
results in better utilization of address space.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig         |   3 ++
 arch/sparc/kernel/smp_64.c | 128 +++++++--------------------------------------
 2 files changed, 21 insertions(+), 110 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 4f6ed0f113f..fbd1233b392 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -95,6 +95,9 @@ config AUDIT_ARCH
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y if SPARC64
+
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index b03fd362c62..ff68373ce6d 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1389,8 +1389,8 @@ void smp_send_stop(void)
  * RETURNS:
  * Pointer to the allocated area on success, NULL on failure.
  */
-static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
-					unsigned long align)
+static void * __init pcpu_alloc_bootmem(unsigned int cpu, size_t size,
+					size_t align)
 {
 	const unsigned long goal = __pa(MAX_DMA_ADDRESS);
 #ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -1415,123 +1415,31 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
-#define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL)
-
-static void __init pcpu_map_range(unsigned long start, unsigned long end,
-				  struct page *page)
+static void __init pcpu_free_bootmem(void *ptr, size_t size)
 {
-	unsigned long pfn = page_to_pfn(page);
-	unsigned long pte_base;
-
-	BUG_ON((pfn<<PAGE_SHIFT)&(PCPU_CHUNK_SIZE - 1UL));
-
-	pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4U |
-		    _PAGE_CP_4U | _PAGE_CV_4U |
-		    _PAGE_P_4U | _PAGE_W_4U);
-	if (tlb_type == hypervisor)
-		pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4V |
-			    _PAGE_CP_4V | _PAGE_CV_4V |
-			    _PAGE_P_4V | _PAGE_W_4V);
-
-	while (start < end) {
-		pgd_t *pgd = pgd_offset_k(start);
-		unsigned long this_end;
-		pud_t *pud;
-		pmd_t *pmd;
-		pte_t *pte;
-
-		pud = pud_offset(pgd, start);
-		if (pud_none(*pud)) {
-			pmd_t *new;
-
-			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
-			pud_populate(&init_mm, pud, new);
-		}
-
-		pmd = pmd_offset(pud, start);
-		if (!pmd_present(*pmd)) {
-			pte_t *new;
-
-			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
-			pmd_populate_kernel(&init_mm, pmd, new);
-		}
-
-		pte = pte_offset_kernel(pmd, start);
-		this_end = (start + PMD_SIZE) & PMD_MASK;
-		if (this_end > end)
-			this_end = end;
-
-		while (start < this_end) {
-			unsigned long paddr = pfn << PAGE_SHIFT;
-
-			pte_val(*pte) = (paddr | pte_base);
+	free_bootmem(__pa(ptr), size);
+}
 
-			start += PAGE_SIZE;
-			pte++;
-			pfn++;
-		}
-	}
+static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	if (cpu_to_node(from) == cpu_to_node(to))
+		return LOCAL_DISTANCE;
+	else
+		return REMOTE_DISTANCE;
 }
 
 void __init setup_per_cpu_areas(void)
 {
-	static struct vm_struct vm;
-	struct pcpu_alloc_info *ai;
-	unsigned long delta, cpu;
-	size_t size_sum;
-	size_t ptrs_size;
-	void **ptrs;
+	unsigned long delta;
+	unsigned int cpu;
 	int rc;
 
-	ai = pcpu_alloc_alloc_info(1, nr_cpu_ids);
-
-	ai->static_size = __per_cpu_end - __per_cpu_start;
-	ai->reserved_size = PERCPU_MODULE_RESERVE;
-
-	size_sum = PFN_ALIGN(ai->static_size + ai->reserved_size +
-			     PERCPU_DYNAMIC_RESERVE);
-
-	ai->dyn_size = size_sum - ai->static_size - ai->reserved_size;
-	ai->unit_size = PCPU_CHUNK_SIZE;
-	ai->atom_size = PCPU_CHUNK_SIZE;
-	ai->alloc_size = PCPU_CHUNK_SIZE;
-	ai->groups[0].nr_units = nr_cpu_ids;
-
-	for_each_possible_cpu(cpu)
-		ai->groups[0].cpu_map[cpu] = cpu;
-
-	ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(ptrs[0]));
-	ptrs = alloc_bootmem(ptrs_size);
-
-	for_each_possible_cpu(cpu) {
-		ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
-					       PCPU_CHUNK_SIZE);
-
-		free_bootmem(__pa(ptrs[cpu] + size_sum),
-			     PCPU_CHUNK_SIZE - size_sum);
-
-		memcpy(ptrs[cpu], __per_cpu_load, ai->static_size);
-	}
-
-	/* allocate address and map */
-	vm.flags = VM_ALLOC;
-	vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE;
-	vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
-
-	for_each_possible_cpu(cpu) {
-		unsigned long start = (unsigned long) vm.addr;
-		unsigned long end;
-
-		start += cpu * PCPU_CHUNK_SIZE;
-		end = start + PCPU_CHUNK_SIZE;
-		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
-	}
-
-	rc = pcpu_setup_first_chunk(ai, vm.addr);
+	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+				    PERCPU_DYNAMIC_RESERVE, 4 << 20,
+				    pcpu_cpu_distance, pcpu_alloc_bootmem,
+				    pcpu_free_bootmem);
 	if (rc)
-		panic("failed to setup percpu first chunk (%d)", rc);
-
-	free_bootmem(__pa(ptrs), ptrs_size);
+		panic("failed to initialize first chunk (%d)", rc);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu)
-- 
cgit v1.2.3


From c2a7e818019f20a5cf7fb26a6eb59e212e6c0cd8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:53 +0900
Subject: powerpc64: convert to dynamic percpu allocator

Now that percpu allows arbitrary embedding of the first chunk,
powerpc64 can easily be converted to dynamic percpu allocator.
Convert it.  powerpc supports several large page sizes.  Cap atom_size
at 1M.  There isn't much to gain by going above that anyway.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig           |  4 +--
 arch/powerpc/kernel/setup_64.c | 61 +++++++++++++++++++++++++++++++-----------
 2 files changed, 47 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 61bbffa2fe6..2c42e1526d0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -46,10 +46,10 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	default y
 
-config HAVE_LEGACY_PER_CPU_AREA
+config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
-config HAVE_SETUP_PER_CPU_AREA
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
 	def_bool PPC64
 
 config IRQ_PER_CPU
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 1f6816003eb..aa6e4500635 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -57,6 +57,7 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
+#include <asm/mmu-hash64.h>
 #include <asm/firmware.h>
 #include <asm/xmon.h>
 #include <asm/udbg.h>
@@ -569,25 +570,53 @@ void cpu_die(void)
 }
 
 #ifdef CONFIG_SMP
-void __init setup_per_cpu_areas(void)
+#define PCPU_DYN_SIZE		()
+
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
 {
-	int i;
-	unsigned long size;
-	char *ptr;
-
-	/* Copy section for each CPU (we discard the original) */
-	size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
-#ifdef CONFIG_MODULES
-	if (size < PERCPU_ENOUGH_ROOM)
-		size = PERCPU_ENOUGH_ROOM;
-#endif
+	return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
+				    __pa(MAX_DMA_ADDRESS));
+}
 
-	for_each_possible_cpu(i) {
-		ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+	free_bootmem(__pa(ptr), size);
+}
 
-		paca[i].data_offset = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-	}
+static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	if (cpu_to_node(from) == cpu_to_node(to))
+		return LOCAL_DISTANCE;
+	else
+		return REMOTE_DISTANCE;
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
+	size_t atom_size;
+	unsigned long delta;
+	unsigned int cpu;
+	int rc;
+
+	/*
+	 * Linear mapping is one of 4K, 1M and 16M.  For 4K, no need
+	 * to group units.  For larger mappings, use 1M atom which
+	 * should be large enough to contain a number of units.
+	 */
+	if (mmu_linear_psize == MMU_PAGE_4K)
+		atom_size = PAGE_SIZE;
+	else
+		atom_size = 1 << 20;
+
+	rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance,
+				    pcpu_fc_alloc, pcpu_fc_free);
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu)
+		paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu];
 }
 #endif
 
-- 
cgit v1.2.3


From 563abb4be1a79e7b64784d43beb9d0cacb1bad6f Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Tue, 11 Aug 2009 17:29:21 +0200
Subject: mx31moboard: invert sdhc ro signal sense

Small confusion with our hardware engineer, the WP signal (RO) is
active low on our boards, the signal has to inverted.

This is a pretty straightforward patch, it could even go to -rc,
but if not, then push it for 2.6.32.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 2 +-
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 2 +-
 arch/arm/mach-mx3/mx31moboard.c          | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405165a..b48581e7ded 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = {
 
 static int devboard_sdhc2_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC2_WP);
+	return !gpio_get_value(SDHC2_WP);
 }
 
 static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6153a..901fb0166c0 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = {
 
 static int marxbot_sdhc2_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC2_WP);
+	return !gpio_get_value(SDHC2_WP);
 }
 
 static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e41160..2a2da4739ec 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
 
 static int moboard_sdhc1_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC1_WP);
+	return !gpio_get_value(SDHC1_WP);
 }
 
 static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-- 
cgit v1.2.3


From cf87a6e2fe95891575c45ba1a0ecb8cf53c09732 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 20 Jul 2009 08:18:47 +0200
Subject: ARM: mxc: Fix i2c_board_info definitions

Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 arch/arm/mach-mx1/mx1ads.c          |  6 ++----
 arch/arm/mach-mx2/eukrea_cpuimx27.c |  3 +--
 arch/arm/mach-mx2/pcm038.c          | 12 ++++--------
 arch/arm/mach-mx3/pcm037.c          |  3 +--
 arch/arm/mach-mx3/pcm043.c          |  3 +--
 5 files changed, 9 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 6af064d19b0..30f04e56faf 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("pcf857x", 0x22),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x22),
 		.platform_data = &pcf857x_data[0],
 	}, {
-		I2C_BOARD_INFO("pcf857x", 0x24),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x24),
 		.platform_data = &pcf857x_data[1],
 	},
 };
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
index a2c4181892c..7b187606682 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -135,8 +135,7 @@ static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
 
 static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
 };
 
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 638d078304c..9a3483c8f58 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm038_i2c_devices[] = {
-	[0] = {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
-	},
-	[1] = {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	},
-	[2] = {
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
 		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 1b9140e2303..b1b3282d15d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -339,8 +339,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 7c7d3cc07b8..e43276ea3b7 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 #endif
-- 
cgit v1.2.3


From c372a5cf4cde161c7f59bbe7a9ebcfce9cb2c2f8 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 12:37:16 +0200
Subject: ARM: MX3: add ckil clock

The CKIL clock source is used by the upcoming RTC driver, so we need
to export it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2b29491c22b..4742554e996 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -403,6 +403,11 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
 	return ckih_rate;
 }
 
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
 static struct clk ckih_clk = {
 	.get_rate = clk_ckih_get_rate,
 };
@@ -509,6 +514,7 @@ DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk)
 DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
 DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c) \
 	{ \
@@ -566,6 +572,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
 	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+	_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)
-- 
cgit v1.2.3


From 12b8eb865285c95d6e2c02555f066e3f949e090d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 10:50:52 +0200
Subject: MXC: use variable for irq controller base in entry-macro.S

This allows us to determine the irq controller base address
on runtime.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/entry-macro.S | 3 ++-
 arch/arm/plat-mxc/irq.c                      | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 5f01d60da84..7cf290efe76 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -18,7 +18,8 @@
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+	ldr	\base, =avic_base
+	ldr	\base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	ldr	r4, [\base, #AVIC_NIMASK]
 #endif
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 618a8b24ed1..778ddfe57d8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -44,7 +44,7 @@
 #define AVIC_FIPNDH		0x60	/* fast int pending high */
 #define AVIC_FIPNDL		0x64	/* fast int pending low */
 
-static void __iomem *avic_base;
+void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
-- 
cgit v1.2.3


From fc2a9f0bc7f6dd4966dc57fb98b8697c83b6d035 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:09:54 +0200
Subject: MXC: i.MX25 timer support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/time.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 7e71bb6270e..59e33a3bf7f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35 */
+/* MX31, MX35, MX25 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(0, timer_base + MX1_2_TSTAT);
 	if (cpu_is_mx2())
 		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3())
+		if (cpu_is_mx3() || cpu_is_mx25())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
-- 
cgit v1.2.3


From 6134b2cbb0e24f897fd1063745638397809fca29 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:16:22 +0200
Subject: iomux-v3: Allow for a runtime base address

also, check for a valid pad_ctrl_ofs before changing the
pad control register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mm.c                    |  2 ++
 arch/arm/plat-mxc/include/mach/iomux-v3.h |  5 +++++
 arch/arm/plat-mxc/iomux-v3.c              | 15 ++++++++++-----
 3 files changed, 17 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index c327172159c..ad5a1122d76 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -30,6 +30,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-v3.h>
 
 /*!
  * @file mm.c
@@ -83,6 +84,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index cd06df9370c..a0fa4026546 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -113,5 +113,10 @@ void mxc_iomux_v3_release_pad(struct pad_desc *pad);
  */
 void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
 
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
+
 #endif /* __MACH_IOMUX_V3_H__*/
 
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 77a078f9513..851ca99bf1b 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 #include <mach/iomux-v3.h>
 
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+static void __iomem *base;
 
 static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
 
@@ -45,14 +45,14 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
 		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
-		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
 	if (pad->select_input_ofs)
 		__raw_writel(pad->select_input,
-				IOMUX_BASE + pad->select_input_ofs);
+				base + pad->select_input_ofs);
 
-	if (!(pad->pad_ctrl & NO_PAD_CTRL))
-		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
+		__raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
 	return 0;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
@@ -96,3 +96,8 @@ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
 	}
 }
 EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
+
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
+{
+	base = iomux_v3_base;
+}
-- 
cgit v1.2.3


From a058cbc17901108de9179dccdb29dff0e00c79fe Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:08:07 +0200
Subject: mxc pwm: add mx25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42dd17b89ff..5cdbd605ac0 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,7 @@
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
 
 
@@ -55,9 +56,11 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	if (cpu_is_mx27() || cpu_is_mx3()) {
+	if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
 		unsigned long long c;
 		unsigned long period_cycles, duty_cycles, prescale;
+		u32 cr;
+
 		c = clk_get_rate(pwm->clk);
 		c = c * period_ns;
 		do_div(c, 1000000000);
@@ -72,9 +75,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
-			pwm->mmio_base + MX3_PWMCR);
+
+		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+
+		if (cpu_is_mx25())
+			cr |= MX3_PWMCR_CLKSRC_IPG;
+		else
+			cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+		writel(cr, pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
 		/* The PWM subsystem allows for exact frequencies. However,
 		 * I cannot connect a scope on my device to the PWM line and
-- 
cgit v1.2.3


From 8c25c36f33157a2e2a1fcd60b6dc00feace80631 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:12 +0200
Subject: Add i.MX25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mx25/Kconfig                   |   5 +
 arch/arm/mach-mx25/Makefile                  |   2 +
 arch/arm/mach-mx25/Makefile.boot             |   3 +
 arch/arm/mach-mx25/clock.c                   | 219 +++++++++++++++
 arch/arm/mach-mx25/devices.c                 | 402 +++++++++++++++++++++++++++
 arch/arm/mach-mx25/devices.h                 |  19 ++
 arch/arm/mach-mx25/mm.c                      |  76 +++++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/gpio.c                     |   2 +-
 arch/arm/plat-mxc/include/mach/common.h      |   3 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   9 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mx25.h        |  44 +++
 arch/arm/plat-mxc/include/mach/mxc.h         |  13 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   1 +
 19 files changed, 816 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx25/Kconfig
 create mode 100644 arch/arm/mach-mx25/Makefile
 create mode 100644 arch/arm/mach-mx25/Makefile.boot
 create mode 100644 arch/arm/mach-mx25/clock.c
 create mode 100644 arch/arm/mach-mx25/devices.c
 create mode 100644 arch/arm/mach-mx25/devices.h
 create mode 100644 arch/arm/mach-mx25/mm.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mx25.h

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..95ba3c5ca14 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,6 +135,7 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
new file mode 100644
index 00000000000..14c918bad52
--- /dev/null
+++ b/arch/arm/mach-mx25/Kconfig
@@ -0,0 +1,5 @@
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
new file mode 100644
index 00000000000..5471086d5e1
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile
@@ -0,0 +1,2 @@
+obj-y				:= mm.o devices.o
+obj-$(CONFIG_ARCH_MX25)		+= clock.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
new file mode 100644
index 00000000000..e1dd366f836
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x80800000
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
new file mode 100644
index 00000000000..ef26951a527
--- /dev/null
+++ b/arch/arm/mach-mx25/clock.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL	0x00
+#define CCM_UPCTL	0x04
+#define CCM_CCTL	0x08
+#define CCM_CGCR0	0x0C
+#define CCM_CGCR1	0x10
+#define CCM_CGCR2	0x14
+#define CCM_PCDR0	0x18
+#define CCM_PCDR1	0x1C
+#define CCM_PCDR2	0x20
+#define CCM_PCDR3	0x24
+#define CCM_RCSR	0x28
+#define CCM_CRDR	0x2C
+#define CCM_DCVR0	0x30
+#define CCM_DCVR1	0x34
+#define CCM_DCVR2	0x38
+#define CCM_DCVR3	0x3c
+#define CCM_LTR0	0x40
+#define CCM_LTR1	0x44
+#define CCM_LTR2	0x48
+#define CCM_LTR3	0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_mpll();
+
+	if (cctl & (1 << 14))
+		rate = (rate * 3) >> 1;
+
+	return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+	return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+	unsigned long ofs = (per & 0x3) * 8;
+	unsigned long reg = per & ~0x3;
+	unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+	unsigned long fref;
+
+	if (readl(CRM_BASE + 0x64) & (1 << per))
+		fref = get_rate_upll();
+	else
+		fref = get_rate_ipg(NULL);
+
+	return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	return get_rate_per(15);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+	return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	return get_rate_per(8);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	return 48000000; /* FIXME */
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CRM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgcr_enable,	\
+		.disable	= clk_cgcr_disable,	\
+	}
+
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+};
+
+int __init mx25_clocks_init(unsigned long fref)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
new file mode 100644
index 00000000000..eb12de1da42
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.c
@@ -0,0 +1,402 @@
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/mx25.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+	{
+		.start = 0x43f90000,
+		.end = 0x43f93fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 45,
+		.end = 45,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = 0x43f94000,
+		.end = 0x43f97fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 32,
+		.end = 32,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = 0x5000c000,
+		.end = 0x5000ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 18,
+		.end = 18,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+	{
+		.start = 0x50008000,
+		.end = 0x5000bfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 5,
+		.end = 5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device3 = {
+	.name = "imx-uart",
+	.id = 3,
+	.resource = uart3,
+	.num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+	{
+		.start = 0x5002c000,
+		.end = 0x5002ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 40,
+		.end = 40,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device4 = {
+	.name = "imx-uart",
+	.id = 4,
+	.resource = uart4,
+	.num_resources = ARRAY_SIZE(uart4),
+};
+
+#define MX25_OTG_BASE_ADDR 0x53FF4000
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_otg_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR,
+		.end = MX25_OTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 37,
+		.end = 37,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_otg = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+/* OTG gadget device */
+struct platform_device otg_udc_device = {
+	.name = "fsl-usb2-udc",
+	.id   = -1,
+	.dev  = {
+		.dma_mask          = &otg_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR + 0x400,
+		.end = MX25_OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 35,
+		.end = 35,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = 0x43fa4000,
+	       .end = 0x43fa7fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 14,
+	       .end = 14,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+	       .start = 0x50010000,
+	       .end = 0x50013fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 13,
+	       .end = 13,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+static struct resource mxc_spi_resources2[] = {
+	{
+	       .start = 0x50004000,
+	       .end = 0x50007fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 0,
+	       .end = 0,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+
+static struct resource mxc_pwm_resources0[] = {
+	{
+		.start	= 0x53fe0000,
+		.end	= 0x53fe3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 26,
+		.end     = 26,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device0 = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources0),
+	.resource = mxc_pwm_resources0,
+};
+
+static struct resource mxc_pwm_resources1[] = {
+	{
+		.start	= 0x53fa0000,
+		.end	= 0x53fa3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 36,
+		.end     = 36,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device1 = {
+	.name = "mxc_pwm",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources1),
+	.resource = mxc_pwm_resources1,
+};
+
+static struct resource mxc_pwm_resources2[] = {
+	{
+		.start	= 0x53fa8000,
+		.end	= 0x53fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 41,
+		.end     = 41,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device2 = {
+	.name = "mxc_pwm",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources2),
+	.resource = mxc_pwm_resources2,
+};
+
+static struct resource mxc_keypad_resources[] = {
+	{
+		.start	= 0x43fa8000,
+		.end	= 0x43fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 24,
+		.end     = 24,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "mxc-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(mxc_keypad_resources),
+	.resource = mxc_keypad_resources,
+};
+
+static struct resource mxc_pwm_resources3[] = {
+	{
+		.start	= 0x53fc8000,
+		.end	= 0x53fcbfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 42,
+		.end     = 42,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device3 = {
+	.name = "mxc_pwm",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources3),
+	.resource = mxc_pwm_resources3,
+};
+
+static struct resource mxc_i2c_1_resources[] = {
+	{
+		.start	= 0x43f80000,
+		.end	= 0x43f83fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+	.resource = mxc_i2c_1_resources,
+};
+
+static struct resource mxc_i2c_2_resources[] = {
+	{
+		.start	= 0x43f98000,
+		.end	= 0x43f9bfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 4,
+		.end	= 4,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+	.resource = mxc_i2c_2_resources,
+};
+
+static struct resource mxc_i2c_3_resources[] = {
+	{
+		.start	= 0x43f84000,
+		.end	= 0x43f87fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 10,
+		.end	= 10,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device2 = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
+	.resource = mxc_i2c_3_resources,
+};
+
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
+		.irq = 52,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
+		.irq = 51,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
+		.irq = 16,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
+		.irq = 23,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
new file mode 100644
index 00000000000..fe6bf88ad1d
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.h
@@ -0,0 +1,19 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_otg;
+extern struct platform_device otg_udc_device;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+extern struct platform_device mxc_pwm_device0;
+extern struct platform_device mxc_pwm_device1;
+extern struct platform_device mxc_pwm_device2;
+extern struct platform_device mxc_pwm_device3;
+extern struct platform_device mxc_keypad_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
new file mode 100644
index 00000000000..a7e587ff3e9
--- /dev/null
+++ b/arch/arm/mach-mx25/mm.c
@@ -0,0 +1,76 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MX25_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AVIC_BASE_ADDR),
+		.length		= MX25_AVIC_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
+		.length		= MX25_AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
+		.length		= MX25_AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX25);
+	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx25_init_irq(void)
+{
+	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+}
+
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0617c19f85c..e342a2e6160 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,13 @@ config ARCH_MX2
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
+config ARCH_MX25
+	bool "MX25-based"
+	select CPU_ARM926T
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale i.MX25 family
+
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
@@ -32,6 +39,7 @@ endchoice
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
+source "arch/arm/mach-mx25/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index f0315edb3eb..cfc4a8b43e6 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -297,7 +297,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-		if (cpu_is_mx1() || cpu_is_mx3()) {
+		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cd8f215c1ad..4e7af741239 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -16,18 +16,21 @@ struct clk;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
+extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f85acd74af..bf683de56b7 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -17,6 +17,15 @@
 #define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx25.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MX2
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 42e4ee37ca1..569af3239c3 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -42,6 +42,10 @@
 # include <mach/mx1.h>
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# include <mach/mx25.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 518a36504b8..f39e016c1cc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -24,6 +24,8 @@
 #define MXC_GPIO_IRQS		(32 * 6)
 #elif defined CONFIG_ARCH_MX3
 #define MXC_GPIO_IRQS		(32 * 3)
+#elif defined CONFIG_ARCH_MX25
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 6065e00176e..42db7394111 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -22,6 +22,8 @@
 #endif
 #elif defined CONFIG_ARCH_MX3
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MX25
+#define PHYS_OFFSET		UL(0x80000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
new file mode 100644
index 00000000000..ec64bd9a8ab
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -0,0 +1,44 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR		0x43F00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_SIZE			SZ_1M
+#define MX25_AIPS2_BASE_ADDR		0x53F00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_SIZE			SZ_1M
+#define MX25_AVIC_BASE_ADDR		0x68000000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_SIZE			SZ_1M
+
+#define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
+
+#define MX25_GPIO1_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
+#define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
+#define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
+
+#define MX25_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
+#define MX25_AVIC_IO_ADDRESS(x)  \
+	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+
+#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
+
+#define MX25_IO_ADDRESS(x)					\
+	(void __force __iomem *)				\
+	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
+	0xDEADBEEF)
+
+#define UART1_BASE_ADDR			0x43f90000
+#define UART2_BASE_ADDR			0x43f94000
+
+#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5fa2a07f4ea..882b816729b 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -26,6 +26,7 @@
 
 #define MXC_CPU_MX1		1
 #define MXC_CPU_MX21		21
+#define MXC_CPU_MX25		25
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
@@ -58,6 +59,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx21()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25()		(0)
+#endif
+
 #ifdef CONFIG_MACH_MX27
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 07b4a73c9d2..0707b7d5b5c 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,6 +26,8 @@
 #define CLOCK_TICK_RATE		13300000
 #elif defined CONFIG_ARCH_MX3
 #define CLOCK_TICK_RATE		16625000
+#elif defined CONFIG_ARCH_MX25
+#define CLOCK_TICK_RATE		16000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 98c8a60214d..b6650e705e3 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -63,6 +63,7 @@ static void putc(int ch)
 #define flush() do { } while (0)
 
 #define MX1_UART1_BASE_ADDR	0x00206000
+#define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 
-- 
cgit v1.2.3


From 635baf6b40ebaef683abf87d677467cba71a0d50 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:46 +0200
Subject: Freescale i.MX25 PDK (3ds) board support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/Kconfig                  |  4 ++
 arch/arm/mach-mx25/Makefile                 |  1 +
 arch/arm/mach-mx25/mx25pdk.c                | 58 +++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/uncompress.h |  3 ++
 4 files changed, 66 insertions(+)
 create mode 100644 arch/arm/mach-mx25/mx25pdk.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 14c918bad52..cc28f56eae8 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -2,4 +2,8 @@ if ARCH_MX25
 
 comment "MX25 platforms:"
 
+config MACH_MX25_3DS
+	select ARCH_MXC_IOMUX_V3
+	bool "Support MX25PDK (3DS) Platform"
+
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 5471086d5e1..fe23836a9f3 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,2 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
new file mode 100644
index 00000000000..92aa4fd19d9
--- /dev/null
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -0,0 +1,58 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
+#include <mach/iomux-v3.h>
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static void __init mx25pdk_init(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &nand_board_info);
+}
+
+
+static void __init mx25pdk_timer_init(void)
+{
+	mx25_clocks_init(26000000);
+}
+
+static struct sys_timer mx25pdk_timer = {
+	.init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= MX25_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = mx25pdk_init,
+	.timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6650e705e3..1e24499f20b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -74,6 +74,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_SCB9328:
 		uart_base = MX1_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MX25_3DS:
+		uart_base = MX25_UART1_BASE_ADDR;
+		break;
 	case MACH_TYPE_IMX27LITE:
 	case MACH_TYPE_MX27_3DS:
 	case MACH_TYPE_MX27ADS:
-- 
cgit v1.2.3


From cf983c93aea2a6cd6de5b405b7506af7732f91d0 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 15 Jul 2009 09:31:15 +0200
Subject: fix mx35 wrong clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 4cf1849f552..1dbcdc07257 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 8e5be212cba6675dc363a224ce4a98bb07039b4b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= <LW@KARO-electronics.de>
Date: Wed, 15 Jul 2009 15:19:34 +0200
Subject: i.MX25 iomux definitions (corrected version)

Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx25.h | 517 ++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/iomux.h      |   6 +
 2 files changed, 523 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx25.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
new file mode 100644
index 00000000000..810c47f56e7
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -0,0 +1,517 @@
+/*
+ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
+ *
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * based on arch/arm/mach-mx25/mx25_pins.h
+ *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and
+ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
+ *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <mach/iomux-v3.h>
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/*
+ *
+ * @brief MX25 I/O Pin List
+ *
+ * @ingroup GPIO_MX25
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ */
+
+#define MX25_PAD_A10__A10		IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A10__GPIO_4_0		IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A13__A13		IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A13__GPIO_4_1		IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A14__A14		IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A14__GPIO_2_0		IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A15__A15		IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A15__GPIO_2_1		IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A16__A16		IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A16__GPIO_2_2		IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A17__A17		IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A17__GPIO_2_3		IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A23__A23		IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A23__GPIO_2_9		IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+
+#define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__GPIO_2_12		IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EB1__EB1		IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__AUD4_RXD		IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__GPIO_2_13		IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE__OE			IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__AUD4_TXC		IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__GPIO_2_14		IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS0__CS0		IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS0__GPIO_4_2		IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS1__CS1		IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__GPIO_4_3		IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS4__CS4		IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__UART5_CTS		IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__GPIO_3_20		IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS5__CS5		IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__UART5_TXD_MUX	IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__GPIO_3_23		IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LBA__LBA		IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__UART5_RXD_MUX	IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__GPIO_3_24		IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BCLK__BCLK		IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BCLK__GPIO_4_4		IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RW__RW			IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__AUD4_TXFS		IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__GPIO_3_25		IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWE_B__NFWE_B		IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWE_B__GPIO_3_26	IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRE_B__NFRE_B		IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFRE_B__GPIO_3_27	IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFALE__NFALE		IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFALE__GPIO_3_28	IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFCLE__NFCLE		IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFCLE__GPIO_3_29	IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWP_B__NFWP_B		IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWP_B__GPIO_3_30	IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRB__NFRB		IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_NFRB__GPIO_3_31	IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D15__D15		IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16		IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__GPIO_4_5		IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D14__D14		IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17		IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__GPIO_4_6		IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D13__D13		IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18		IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__GPIO_4_7		IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D12__D12		IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D12__GPIO_4_8		IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D11__D11		IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D11__GPIO_4_9		IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D10__D10		IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__GPIO_4_10		IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__USBOTG_OC		IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D9__D9			IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__GPIO_4_11		IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__USBH2_PWR		IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_D8__D8			IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__GPIO_4_12		IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__USBH2_OC		IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D7__D7			IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D7__GPIO_4_13		IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D6__D6			IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D6__GPIO_4_14		IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D5__D5			IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D5__GPIO_4_15		IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D4__D4			IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D4__GPIO_4_16		IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D3__D3			IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D3__GPIO_4_17		IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D2__D2			IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D2__GPIO_4_18		IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D1__D1			IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D1__GPIO_4_19		IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D0__D0			IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D0__GPIO_4_20		IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD0__LD0		IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__CSI_D0		IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__GPIO_2_15		IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD1__LD1		IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__CSI_D1		IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__GPIO_2_16		IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD2__LD2		IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__GPIO_2_17		IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD3__LD3		IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__GPIO_2_18		IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD4__LD4		IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__GPIO_2_19		IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD5__LD5		IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__GPIO_1_19		IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD6__LD6		IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__GPIO_1_20		IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD7__LD7		IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+
+#define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSYNC__VSYNC		IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSYNC__GPIO_1_23	IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LSCLK__LSCLK		IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LSCLK__GPIO_1_24	IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE_ACD__OE_ACD		IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+
+#define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__USBH2_OC		IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_CSI_D2__CSI_D2		IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX	IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__GPIO_1_27	IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D3__CSI_D3		IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__GPIO_1_28	IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D4__CSI_D4		IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__UART5_RTS	IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__GPIO_1_29	IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D5__CSI_D5		IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__GPIO_1_30	IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D6__CSI_D6		IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D6__GPIO_1_31	IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D7__CSI_D7		IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D7__GPIO_1_6	IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D8__CSI_D8		IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D8__GPIO_1_7	IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D9__CSI_D9		IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D9__GPIO_4_21	IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK	IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_MCLK__GPIO_1_8	IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC	IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9	IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC	IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10	IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK	IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11	IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK	IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_CLK__GPIO_1_12	IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT	IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_DAT__GPIO_1_13	IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI	IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14	IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO	IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15	IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0	IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16	IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1	IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17	IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK	IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18	IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY	IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22	IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_UART1_RXD__GPIO_4_22	IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART1_TXD__GPIO_4_23	IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_RTS__CSI_D0	IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_RTS__GPIO_4_24	IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_CTS__CSI_D1	IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_CTS__GPIO_4_25	IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RXD__GPIO_4_26	IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA0__GPIO_2_25	IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA1__AUD7_RXD	IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
+#define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13	IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RTCK__RTCK		IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__OWIRE		IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__GPIO_3_14	IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_DE_B__DE_B		IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_DE_B__GPIO_2_20	IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_TDO__TDO		IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_A__GPIO_A		IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_A__CAN1_TX	IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__AUD7_TXC	IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK	IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15	IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16	IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ	IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS	IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17	IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK	IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18	IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL	IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__AUD7_RXD	IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__GPIO_3_19	IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CLKO__CLKO		IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CLKO__GPIO_2_21	IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30	IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31	IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CTL_GRP_DVS_MISC	IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_FEC	IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_JTAG	IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_NFC	IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSI	IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_WEIM	IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_DDR	IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CRM	IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_KPP	IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_SDHC1	IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_LCD	IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_UART	IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_NFC	IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CSI	IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSPI1	IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DDRTYPE	IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+
+#endif // __ASSEMBLY__
+#endif // __IOMUX_MX25_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 171f8adc110..6d49f8ae325 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -49,6 +49,9 @@
 #ifdef CONFIG_ARCH_MX2
 # define GPIO_PORT_MAX  5
 #endif
+#ifdef CONFIG_ARCH_MX25
+# define GPIO_PORT_MAX  3
+#endif
 
 #ifndef GPIO_PORT_MAX
 # error "GPIO config port count unknown!"
@@ -107,6 +110,9 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
+#ifdef CONFIG_ARCH_MX25
+#include <mach/iomux-mx25.h>
+#endif
 
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
-- 
cgit v1.2.3


From fd6ac7bb9d671d36fd7536c68fde977d197756ab Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:22 +0900
Subject: MXC: add basic MXC91231 support

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mxc91231/Kconfig               |  11 +
 arch/arm/mach-mxc91231/Makefile              |   2 +
 arch/arm/mach-mxc91231/Makefile.boot         |   3 +
 arch/arm/mach-mxc91231/clock.c               | 642 +++++++++++++++++++++++++++
 arch/arm/mach-mxc91231/crm_regs.h            | 399 +++++++++++++++++
 arch/arm/mach-mxc91231/devices.c             | 251 +++++++++++
 arch/arm/mach-mxc91231/devices.h             |  13 +
 arch/arm/mach-mxc91231/magx-zn5.c            |  59 +++
 arch/arm/mach-mxc91231/mm.c                  |  94 ++++
 arch/arm/mach-mxc91231/system.c              |  51 +++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/include/mach/common.h      |   6 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   8 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mxc.h         |  15 +-
 arch/arm/plat-mxc/include/mach/mxc91231.h    | 315 +++++++++++++
 arch/arm/plat-mxc/include/mach/system.h      |  10 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   4 +
 arch/arm/plat-mxc/system.c                   |   7 +
 arch/arm/plat-mxc/time.c                     |   2 +-
 24 files changed, 1909 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-mxc91231/Kconfig
 create mode 100644 arch/arm/mach-mxc91231/Makefile
 create mode 100644 arch/arm/mach-mxc91231/Makefile.boot
 create mode 100644 arch/arm/mach-mxc91231/clock.c
 create mode 100644 arch/arm/mach-mxc91231/crm_regs.h
 create mode 100644 arch/arm/mach-mxc91231/devices.c
 create mode 100644 arch/arm/mach-mxc91231/devices.h
 create mode 100644 arch/arm/mach-mxc91231/magx-zn5.c
 create mode 100644 arch/arm/mach-mxc91231/mm.c
 create mode 100644 arch/arm/mach-mxc91231/system.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mxc91231.h

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 95ba3c5ca14..c1d60038328 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -159,6 +159,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
new file mode 100644
index 00000000000..8e5fa38ebb6
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_MXC91231
+
+comment "MXC91231 platforms:"
+
+config MACH_MAGX_ZN5
+	bool "Support Motorola Zn5 GSM phone"
+	default n
+	help
+	  Include support for Motorola Zn5 GSM phone.
+
+endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
new file mode 100644
index 00000000000..eb70b669c55
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -0,0 +1,2 @@
+obj-y	:= mm.o clock.o devices.o system.o
+obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
new file mode 100644
index 00000000000..9939a19d99a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x90008000
+params_phys-y	:= 0x90000100
+initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
new file mode 100644
index 00000000000..ecfa37fef8a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -0,0 +1,642 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/clkdev.h>
+#include <asm/bug.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define CRM_SMALL_DIVIDER(base, name) \
+	crm_small_divider(base, \
+			  base ## _ ## name ## _OFFSET, \
+			  base ## _ ## name ## _MASK)
+#define CRM_1DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 1)
+#define CRM_16DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 16)
+
+static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
+{
+	static const u32 crm_small_dividers[] = {
+		2, 3, 4, 5, 6, 8, 10, 12
+	};
+	u8 idx;
+
+	idx = (__raw_readl(reg) & mask) >> offset;
+	if (idx > 7)
+		return 1;
+
+	return crm_small_dividers[idx];
+}
+
+static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
+{
+	u32 div;
+	div = (__raw_readl(reg) & mask) >> offset;
+	return div ? div : z;
+}
+
+static int _clk_1bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_1bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_3bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 0x7 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_3bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(0x7 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+	return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+	.get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
+{
+	return 2 * clk_get_rate(clk->parent);
+}
+
+static struct clk ckih_x2_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ckih_x2_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+	.get_rate = clk_ckil_get_rate,
+};
+
+/* plls stuff */
+static struct clk mcu_pll_clk;
+static struct clk dsp_pll_clk;
+static struct clk usb_pll_clk;
+
+static struct clk *pll_clk(u8 sel)
+{
+	switch (sel) {
+	case 0:
+		return &mcu_pll_clk;
+	case 1:
+		return &dsp_pll_clk;
+	case 2:
+		return &usb_pll_clk;
+	}
+	BUG();
+}
+
+static void __iomem *pll_base(struct clk *clk)
+{
+	if (clk == &mcu_pll_clk)
+		return MXC_PLL0_BASE;
+	else if (clk == &dsp_pll_clk)
+		return MXC_PLL1_BASE;
+	else if (clk == &usb_pll_clk)
+		return MXC_PLL2_BASE;
+	BUG();
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+	const void __iomem *pllbase;
+	unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
+	long mfn, mfn_abs, mfd, pdf;
+	s64 temp;
+	pllbase = pll_base(clk);
+
+	pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
+
+	if (mfn < 0)
+		mfn_abs = -mfn;
+	else
+		mfn_abs = mfn;
+
+/* XXX: actually this asumes that ckih is fed to pll, but spec says
+ * that ckih_x2 is also possible. need to check this out.
+ */
+	ref_clk = clk_get_rate(&ckih_clk);
+
+	ref_clk *= 2;
+	ref_clk /= pdf + 1;
+
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd);
+	if (mfn < 0)
+		temp = -temp;
+	temp += ref_clk * mfi;
+
+	return temp;
+}
+
+static int clk_pll_enable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+	do {
+		reg = __raw_readl(ctl);
+	} while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
+	return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+}
+
+static struct clk mcu_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk dsp_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+/* plls stuff end */
+
+/* ap_ref_clk stuff */
+static struct clk ap_ref_clk;
+
+static unsigned long clk_ap_ref_get_rate(struct clk *clk)
+{
+	u32 ascsr, acsr;
+	u8 ap_pat_ref_div_2, ap_isel, acs, ads;
+
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+
+	/* 0 for ckih, 1 for ckih*2 */
+	ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
+	/* reg divider */
+	ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
+	/* undocumented, 1 for disabling divider */
+	ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
+	/* 0 for pat_ref, 1 for divider out */
+	acs = acsr & MXC_CRMAP_ACSR_ACS;
+
+	if (acs & !ads)
+		/* use divided clock */
+		return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
+
+	return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
+}
+
+static struct clk ap_ref_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ap_ref_get_rate,
+};
+/* ap_ref_clk stuff end */
+
+/* ap_pre_dfs_clk stuff */
+static struct clk ap_pre_dfs_clk;
+
+static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
+			MXC_CRMAP_ASCSR_APSEL_OFFSET;
+		return clk_get_rate(pll_clk(sel)) /
+			CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
+	}
+	return clk_get_rate(&ap_ref_clk);
+}
+
+static struct clk ap_pre_dfs_clk = {
+	.get_rate = clk_ap_pre_dfs_get_rate,
+};
+/* ap_pre_dfs_clk stuff end */
+
+/* usb_clk stuff */
+static struct clk usb_clk;
+
+static struct clk *clk_usb_parent(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
+			MXC_CRMAP_ASCSR_USBSEL_OFFSET;
+		return pll_clk(sel);
+	}
+	return &ap_ref_clk;
+}
+
+static unsigned long clk_usb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
+}
+
+static struct clk usb_clk = {
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
+	.get_rate = clk_usb_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* usb_clk stuff end */
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
+}
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
+}
+
+static struct clk ipg_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ahb_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ahb_get_rate,
+};
+
+/* perclk_clk stuff */
+static struct clk perclk_clk;
+
+static unsigned long clk_perclk_get_rate(struct clk *clk)
+{
+	u32 acder2;
+
+	acder2 = __raw_readl(MXC_CRMAP_ACDER2);
+	if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
+		return 2 * clk_get_rate(clk->parent);
+
+	return clk_get_rate(clk->parent);
+}
+
+static struct clk perclk_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_perclk_get_rate,
+};
+/* perclk_clk stuff end */
+
+/* uart_clk stuff */
+static struct clk uart_clk[];
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
+		break;
+	case 2:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
+		break;
+	default:
+		BUG();
+	}
+	return clk_get_rate(clk->parent) / div;
+}
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 1,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 2,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	},
+};
+/* uart_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk nfc_clk;
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
+}
+
+static struct clk nfc_clk = {
+	.parent = &ahb_clk,
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
+	.get_rate = clk_nfc_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* sdhc_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk sdhc_clk[];
+
+static struct clk *clk_sdhc_parent(struct clk *clk)
+{
+	u32 aprb;
+	u8 sel;
+	u32 mask;
+	int offset;
+
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+
+	switch (clk->id) {
+	case 0:
+		mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
+		break;
+	case 1:
+		mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
+		break;
+	default:
+		BUG();
+	}
+	sel = (aprb & mask) >> offset;
+
+	switch (sel) {
+	case 0:
+		return &ckih_clk;
+	case 1:
+		return &ckih_x2_clk;
+	}
+	return &usb_clk;
+}
+
+static unsigned long clk_sdhc_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
+		break;
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
+		break;
+	default:
+		BUG();
+	}
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int clk_sdhc_enable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+	return 0;
+}
+
+static void clk_sdhc_disable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+}
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	}, {
+		.id = 1,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	},
+};
+/* sdhc_clk stuff end */
+
+/* wdog_clk stuff */
+static struct clk wdog_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* wdog_clk stuff end */
+
+/* gpt_clk stuff */
+static struct clk gpt_clk = {
+	.parent = &ipg_clk,
+	.enable_reg = MXC_CRMAP_AMLPMRC,
+	.enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
+	.enable = _clk_3bit_enable,
+	.disable = _clk_3bit_disable,
+};
+/* gpt_clk stuff end */
+
+/* cspi_clk stuff */
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE2,
+		.enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE1,
+		.enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* cspi_clk stuff end */
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
+	_REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
+};
+
+int __init mxc91231_clocks_init(unsigned long fref)
+{
+	void __iomem *gpt_base;
+	int i;
+
+	ckih_rate = fref;
+
+	usb_clk.parent = clk_usb_parent(&usb_clk);
+	sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
+	sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
+	mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
new file mode 100644
index 00000000000..ce4f5905818
--- /dev/null
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Copyright 2006-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+
+#define CKIL_CLK_FREQ			32768
+
+#define MXC_CRM_AP_BASE			MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
+#define MXC_CRM_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
+#define MXC_DSM_BASE			MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
+#define MXC_PLL0_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
+#define MXC_PLL1_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
+#define MXC_PLL2_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
+#define MXC_CLKCTL_BASE			MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		0xF
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x7FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0
+#define MXC_PLL_DP_MFN_MASK		0x7FFFFFF
+
+/* CRM AP Register Offsets */
+#define MXC_CRMAP_ASCSR			(MXC_CRM_AP_BASE + 0x00)
+#define MXC_CRMAP_ACDR			(MXC_CRM_AP_BASE + 0x04)
+#define MXC_CRMAP_ACDER1		(MXC_CRM_AP_BASE + 0x08)
+#define MXC_CRMAP_ACDER2		(MXC_CRM_AP_BASE + 0x0C)
+#define MXC_CRMAP_ACGCR			(MXC_CRM_AP_BASE + 0x10)
+#define MXC_CRMAP_ACCGCR		(MXC_CRM_AP_BASE + 0x14)
+#define MXC_CRMAP_AMLPMRA		(MXC_CRM_AP_BASE + 0x18)
+#define MXC_CRMAP_AMLPMRB		(MXC_CRM_AP_BASE + 0x1C)
+#define MXC_CRMAP_AMLPMRC		(MXC_CRM_AP_BASE + 0x20)
+#define MXC_CRMAP_AMLPMRD		(MXC_CRM_AP_BASE + 0x24)
+#define MXC_CRMAP_AMLPMRE1		(MXC_CRM_AP_BASE + 0x28)
+#define MXC_CRMAP_AMLPMRE2		(MXC_CRM_AP_BASE + 0x2C)
+#define MXC_CRMAP_AMLPMRF		(MXC_CRM_AP_BASE + 0x30)
+#define MXC_CRMAP_AMLPMRG		(MXC_CRM_AP_BASE + 0x34)
+#define MXC_CRMAP_APGCR			(MXC_CRM_AP_BASE + 0x38)
+#define MXC_CRMAP_ACSR			(MXC_CRM_AP_BASE + 0x3C)
+#define MXC_CRMAP_ADCR			(MXC_CRM_AP_BASE + 0x40)
+#define MXC_CRMAP_ACR			(MXC_CRM_AP_BASE + 0x44)
+#define MXC_CRMAP_AMCR			(MXC_CRM_AP_BASE + 0x48)
+#define MXC_CRMAP_APCR			(MXC_CRM_AP_BASE + 0x4C)
+#define MXC_CRMAP_AMORA			(MXC_CRM_AP_BASE + 0x50)
+#define MXC_CRMAP_AMORB			(MXC_CRM_AP_BASE + 0x54)
+#define MXC_CRMAP_AGPR			(MXC_CRM_AP_BASE + 0x58)
+#define MXC_CRMAP_APRA			(MXC_CRM_AP_BASE + 0x5C)
+#define MXC_CRMAP_APRB			(MXC_CRM_AP_BASE + 0x60)
+#define MXC_CRMAP_APOR			(MXC_CRM_AP_BASE + 0x64)
+#define MXC_CRMAP_ADFMR			(MXC_CRM_AP_BASE + 0x68)
+
+/* CRM AP Register Bit definitions */
+#define MXC_CRMAP_ASCSR_CRS			0x10000
+#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET	15
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2		0x8000
+#define MXC_CRMAP_ASCSR_USBSEL_OFFSET		13
+#define MXC_CRMAP_ASCSR_USBSEL_MASK		(0x3 << 13)
+#define MXC_CRMAP_ASCSR_CSISEL_OFFSET		11
+#define MXC_CRMAP_ASCSR_CSISEL_MASK		(0x3 << 11)
+#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET		7
+#define MXC_CRMAP_ASCSR_SSI2SEL_MASK		(0x3 << 7)
+#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET		5
+#define MXC_CRMAP_ASCSR_SSI1SEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ASCSR_APSEL_OFFSET		3
+#define MXC_CRMAP_ASCSR_APSEL_MASK		(0x3 << 3)
+#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET	2
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1		0x4
+#define MXC_CRMAP_ASCSR_APISEL			0x1
+
+#define MXC_CRMAP_ACDR_ARMDIV_OFFSET		8
+#define MXC_CRMAP_ACDR_ARMDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDR_AHBDIV_OFFSET		4
+#define MXC_CRMAP_ACDR_AHBDIV_MASK		(0xF << 4)
+#define MXC_CRMAP_ACDR_IPDIV_OFFSET		0
+#define MXC_CRMAP_ACDR_IPDIV_MASK		0xF
+
+#define MXC_CRMAP_ACDER1_CSIEN_OFFSET		30
+#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET		24
+#define MXC_CRMAP_ACDER1_CSIDIV_MASK		(0x3F << 24)
+#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET		14
+#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET		8
+#define MXC_CRMAP_ACDER1_SSI2DIV_MASK		(0x3F << 8)
+#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET		6
+#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET		0
+#define MXC_CRMAP_ACDER1_SSI1DIV_MASK		0x3F
+
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET	24
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK	(0x7 << 24)
+#define MXC_CRMAP_ACDER2_NFCEN_OFFSET		20
+#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET		16
+#define MXC_CRMAP_ACDER2_NFCDIV_MASK		(0xF << 16)
+#define MXC_CRMAP_ACDER2_USBEN_OFFSET		12
+#define MXC_CRMAP_ACDER2_USBDIV_OFFSET		8
+#define MXC_CRMAP_ACDER2_USBDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET	5
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET		0
+#define MXC_CRMAP_ACDER2_BAUDDIV_MASK		0xF
+
+#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET		22
+#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET		19
+#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET		12
+#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET		9
+#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET		6
+#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET		3
+#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK		(0x7 << 3)
+
+#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET		0
+#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET		28
+#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET		22
+#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET		16
+#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET		12
+#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET		9
+#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET		6
+#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET		3
+#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET		0
+#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET		22
+#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET		12
+#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET		9
+#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET		6
+#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET		0
+#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET	28
+#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET	25
+#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK		(0x7 << 25)
+#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET	22
+#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET	19
+#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET	16
+#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET	12
+#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET	9
+#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET	6
+#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET	3
+#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET		19
+#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET		16
+#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET		9
+#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET		6
+#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET		3
+#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET		0
+#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK		(0x7 << 0)
+
+#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET		28
+#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET		22
+#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET		19
+#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET		16
+#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET		12
+#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET		9
+#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET		6
+#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET		3
+#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET		0
+#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK		0x7
+
+#define MXC_CRMAP_AGPR_IPUPAD_OFFSET		20
+#define MXC_CRMAP_AGPR_IPUPAD_MASK		(0x7 << 20)
+
+#define MXC_CRMAP_APRA_EL1TEN_OFFSET		29
+#define MXC_CRMAP_APRA_SIMEN_OFFSET		24
+#define MXC_CRMAP_APRA_UART3DIV_OFFSET		17
+#define MXC_CRMAP_APRA_UART3DIV_MASK		(0xF << 17)
+#define MXC_CRMAP_APRA_UART3EN_OFFSET		16
+#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET	14
+#define MXC_CRMAP_APRA_MQSPIEN_OFFSET		13
+#define MXC_CRMAP_APRA_UART2EN_OFFSET		8
+#define MXC_CRMAP_APRA_UART1EN_OFFSET		0
+
+#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET	13
+#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK		(0x7 << 13)
+#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET		9
+#define MXC_CRMAP_APRB_SDHC2_DIV_MASK		(0xF << 9)
+#define MXC_CRMAP_APRB_SDHC2EN_OFFSET		8
+#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET	5
+#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK		(0x7 << 5)
+#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET		1
+#define MXC_CRMAP_APRB_SDHC1_DIV_MASK		(0xF << 1)
+#define MXC_CRMAP_APRB_SDHC1EN_OFFSET		0
+
+#define MXC_CRMAP_ACSR_ADS_OFFSET		8
+#define MXC_CRMAP_ACSR_ADS			(0x1 << 8)
+#define MXC_CRMAP_ACSR_ACS			0x1
+
+#define MXC_CRMAP_ADCR_LFDF_0			(0x0 << 8)
+#define MXC_CRMAP_ADCR_LFDF_2			(0x1 << 8)
+#define MXC_CRMAP_ADCR_LFDF_4			(0x2 << 8)
+#define MXC_CRMAP_ADCR_LFDF_8			(0x3 << 8)
+#define MXC_CRMAP_ADCR_LFDF_OFFSET		8
+#define MXC_CRMAP_ADCR_LFDF_MASK		(0x3 << 8)
+#define MXC_CRMAP_ADCR_ALT_PLL			0x80
+#define MXC_CRMAP_ADCR_DFS_DIVEN		0x20
+#define MXC_CRMAP_ADCR_DIV_BYP			0x2
+#define MXC_CRMAP_ADCR_VSTAT			0x8
+#define MXC_CRMAP_ADCR_TSTAT			0x10
+#define MXC_CRMAP_ADCR_DVFS_VCTRL		0x10
+#define MXC_CRMAP_ADCR_CLK_ON			0x40
+
+#define MXC_CRMAP_ADFMR_FC_OFFSET		16
+#define MXC_CRMAP_ADFMR_FC_MASK			(0x1F << 16)
+#define MXC_CRMAP_ADFMR_MF_OFFSET		1
+#define MXC_CRMAP_ADFMR_MF_MASK			(0x3FF << 1)
+#define MXC_CRMAP_ADFMR_DFM_CLK_READY		0x1
+#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN		0x8000
+
+#define MXC_CRMAP_ACR_CKOHS_HIGH		(1 << 18)
+#define MXC_CRMAP_ACR_CKOS_HIGH			(1 << 16)
+#define MXC_CRMAP_ACR_CKOHS_MASK		(0x7 << 12)
+#define MXC_CRMAP_ACR_CKOHD			(1 << 11)
+#define MXC_CRMAP_ACR_CKOHDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACR_CKOHDIV_OFFSET		8
+#define MXC_CRMAP_ACR_CKOD			(1 << 7)
+#define MXC_CRMAP_ACR_CKOS_MASK			(0x7 << 4)
+
+/* AP Warm reset */
+#define MXC_CRMAP_AMCR_SW_AP			(1 << 14)
+
+/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
+#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT		0x00000001
+#define MXC_CRMAP_ACGCR_ACG0_STOP		0x00000003
+#define MXC_CRMAP_ACGCR_ACG0_RUN		0x00000007
+#define MXC_CRMAP_ACGCR_ACG0_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT		0x00000008
+#define MXC_CRMAP_ACGCR_ACG1_STOP		0x00000018
+#define MXC_CRMAP_ACGCR_ACG1_RUN		0x00000038
+#define MXC_CRMAP_ACGCR_ACG1_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT		0x00000040
+#define MXC_CRMAP_ACGCR_ACG2_STOP		0x000000C0
+#define MXC_CRMAP_ACGCR_ACG2_RUN		0x000001C0
+#define MXC_CRMAP_ACGCR_ACG2_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT		0x00000200
+#define MXC_CRMAP_ACGCR_ACG3_STOP		0x00000600
+#define MXC_CRMAP_ACGCR_ACG3_RUN		0x00000E00
+#define MXC_CRMAP_ACGCR_ACG3_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT		0x00001000
+#define MXC_CRMAP_ACGCR_ACG4_STOP		0x00003000
+#define MXC_CRMAP_ACGCR_ACG4_RUN		0x00007000
+#define MXC_CRMAP_ACGCR_ACG4_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT		0x00010000
+#define MXC_CRMAP_ACGCR_ACG5_STOP		0x00030000
+#define MXC_CRMAP_ACGCR_ACG5_RUN		0x00070000
+#define MXC_CRMAP_ACGCR_ACG5_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT		0x00080000
+#define MXC_CRMAP_ACGCR_ACG6_STOP		0x00180000
+#define MXC_CRMAP_ACGCR_ACG6_RUN		0x00380000
+#define MXC_CRMAP_ACGCR_ACG6_DISABLED		0x00000000
+
+#define NUM_GATE_CTRL				6
+
+/* CRM COM Register Offsets */
+#define MXC_CRMCOM_CSCR				(MXC_CRM_COM_BASE + 0x0C)
+#define MXC_CRMCOM_CCCR				(MXC_CRM_COM_BASE + 0x10)
+
+/* CRM COM Bit Definitions */
+#define MXC_CRMCOM_CSCR_PPD1			0x08000000
+#define MXC_CRMCOM_CSCR_CKOHSEL			(1 << 18)
+#define MXC_CRMCOM_CSCR_CKOSEL			(1 << 17)
+#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET		8
+#define MXC_CRMCOM_CCCR_CC_DIV_MASK		(0x1F << 8)
+#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET		0
+#define MXC_CRMCOM_CCCR_CC_SEL_MASK		0x3
+
+/* DSM Register Offsets */
+#define MXC_DSM_SLEEP_TIME			(MXC_DSM_BASE + 0x0c)
+#define MXC_DSM_CONTROL0			(MXC_DSM_BASE + 0x20)
+#define MXC_DSM_CONTROL1			(MXC_DSM_BASE + 0x24)
+#define MXC_DSM_CTREN				(MXC_DSM_BASE + 0x28)
+#define MXC_DSM_WARM_PER			(MXC_DSM_BASE + 0x40)
+#define MXC_DSM_LOCK_PER			(MXC_DSM_BASE + 0x44)
+#define MXC_DSM_MGPER				(MXC_DSM_BASE + 0x4c)
+#define MXC_DSM_CRM_CONTROL			(MXC_DSM_BASE + 0x50)
+
+/* Bit definitions of various registers in DSM */
+#define MXC_DSM_CRM_CTRL_DVFS_BYP		0x00000008
+#define MXC_DSM_CRM_CTRL_DVFS_VCTRL		0x00000004
+#define MXC_DSM_CRM_CTRL_LPMD1			0x00000002
+#define MXC_DSM_CRM_CTRL_LPMD0			0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE		0x00000000
+#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE		0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE		0x00000003
+#define MXC_DSM_CONTROL0_STBY_COMMIT_EN		0x00000200
+#define MXC_DSM_CONTROL0_MSTR_EN		0x00000001
+#define MXC_DSM_CONTROL0_RESTART		0x00000010
+/* Counter Block reset */
+#define MXC_DSM_CONTROL1_CB_RST			0x00000002
+/* State Machine reset */
+#define MXC_DSM_CONTROL1_SM_RST			0x00000004
+/* Bit needed to reset counter block */
+#define MXC_CONTROL1_RST_CNT32			0x00000008
+#define MXC_DSM_CONTROL1_RST_CNT32_EN		0x00000800
+#define MXC_DSM_CONTROL1_SLEEP			0x00000100
+#define MXC_DSM_CONTROL1_WAKEUP_DISABLE		0x00004000
+#define MXC_DSM_CTREN_CNT32			0x00000001
+
+/* Magic Fix enable bit */
+#define MXC_DSM_MGPER_EN_MGFX			0x80000000
+#define MXC_DSM_MGPER_PER_MASK			0x000003FF
+#define MXC_DSM_MGPER_PER(n)			(MXC_DSM_MGPER_PER_MASK & n)
+
+/* Address offsets of the CLKCTL registers */
+#define MXC_CLKCTL_GP_CTRL	(MXC_CLKCTL_BASE + 0x00)
+#define MXC_CLKCTL_GP_SER	(MXC_CLKCTL_BASE + 0x04)
+#define MXC_CLKCTL_GP_CER	(MXC_CLKCTL_BASE + 0x08)
+
+#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
new file mode 100644
index 00000000000..353bd977b39
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = MXC91231_UART1_BASE_ADDR,
+		.end = MXC91231_UART1_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART1_RX,
+		.end = MXC91231_INT_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_TX,
+		.end = MXC91231_INT_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_MINT,
+		.end = MXC91231_INT_UART1_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = MXC91231_UART2_BASE_ADDR,
+		.end = MXC91231_UART2_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART2_RX,
+		.end = MXC91231_INT_UART2_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_TX,
+		.end = MXC91231_INT_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_MINT,
+		.end = MXC91231_INT_UART2_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = MXC91231_UART3_BASE_ADDR,
+		.end = MXC91231_UART3_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART3_RX,
+		.end = MXC91231_INT_UART3_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_TX,
+		.end = MXC91231_INT_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_MINT,
+		.end = MXC91231_INT_UART3_MINT,
+		.flags = IORESOURCE_IRQ,
+
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO1,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO2,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO3,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	},
+	[3] = {
+		.chip.label = "gpio-3",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO4,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	},
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MXC91231_NFC_BASE_ADDR,
+		.end	= MXC91231_NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC91231_INT_NANDFC,
+		.end	= MXC91231_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};
+
+static struct resource mxc_sdhc0_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC1_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC1,
+		.end = MXC91231_INT_MMC_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_sdhc1_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC2_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC2,
+		.end = MXC91231_INT_MMC_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_sdhc_device0 = {
+	.name = "mxc-mmc",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
+	.resource = mxc_sdhc0_resources,
+};
+
+struct platform_device mxc_sdhc_device1 = {
+	.name = "mxc-mmc",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+	.resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_cspi0_resources[] = {
+	{
+		.start = MXC91231_CSPI1_BASE_ADDR,
+		.end = MXC91231_CSPI1_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI1,
+		.end = MXC91231_INT_CSPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_cspi0_resources),
+	.resource = mxc_cspi0_resources,
+};
+
+static struct resource mxc_cspi1_resources[] = {
+	{
+		.start = MXC91231_CSPI2_BASE_ADDR,
+		.end = MXC91231_CSPI2_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI2,
+		.end = MXC91231_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_cspi1_resources),
+	.resource = mxc_cspi1_resources,
+};
+
+static struct resource mxc_wdog0_resources[] = {
+	{
+		.start = MXC91231_WDOG1_BASE_ADDR,
+		.end = MXC91231_WDOG1_BASE_ADDR + 0x10,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdog_device0 = {
+	.name = "mxc-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdog0_resources),
+	.resource = mxc_wdog0_resources,
+};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
new file mode 100644
index 00000000000..72a2136ce27
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.h
@@ -0,0 +1,13 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+
+extern struct platform_device mxc_nand_device;
+
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+
+extern struct platform_device mxc_cspi_device0;
+extern struct platform_device mxc_cspi_device1;
+
+extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
new file mode 100644
index 00000000000..8757573b0a8
--- /dev/null
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+};
+
+static void __init zn5_init(void)
+{
+	pm_power_off = mxc91231_power_off;
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+	mxc_register_device(&mxc_wdog_device0, NULL);
+
+	return;
+}
+
+static void __init zn5_timer_init(void)
+{
+	mxc91231_clocks_init(26000000); /* 26mhz ckih */
+}
+
+struct sys_timer zn5_timer = {
+	.init = zn5_timer_init,
+};
+
+MACHINE_START(MAGX_ZN5, "Motorola Zn5")
+	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc91231_map_io,
+	.init_irq	= mxc91231_init_irq,
+	.timer		= &zn5_timer,
+	.init_machine	= zn5_init,
+MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
new file mode 100644
index 00000000000..6becda3ff33
--- /dev/null
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -0,0 +1,94 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MXC specific definitions
+ *  Copyright 2006 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/*
+ * This structure defines the MXC memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MXC91231_L2CC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
+		.length		= MXC91231_L2CC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_X_MEMC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
+		.length		= MXC91231_X_MEMC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_ROMP_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
+		.length		= MXC91231_ROMP_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
+		.length		= MXC91231_AVIC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
+		.length		= MXC91231_AIPS1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA0_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
+		.length		= MXC91231_SPBA0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
+		.length		= MXC91231_SPBA1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
+		.length		= MXC91231_AIPS2_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory map for
+ * the IO modules.
+ */
+void __init mxc91231_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MXC91231);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mxc91231_init_irq(void)
+{
+	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
new file mode 100644
index 00000000000..736f7efd874
--- /dev/null
+++ b/arch/arm/mach-mxc91231/system.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+#include "crm_regs.h"
+
+#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
+#define WDOG_WCR_OUT_ENABLE	(1 << 6)
+#define WDOG_WCR_ASSERT		(1 << 5)
+
+void mxc91231_power_off(void)
+{
+	u16 wcr;
+
+	wcr = __raw_readw(WDOG_WCR);
+	wcr |= WDOG_WCR_OUT_ENABLE;
+	wcr &= ~WDOG_WCR_ASSERT;
+	__raw_writew(wcr, WDOG_WCR);
+}
+
+void mxc91231_arch_reset(char mode, const char *cmd)
+{
+	u32 amcr;
+
+	/* Reset the AP using CRM */
+	amcr = __raw_readl(MXC_CRMAP_AMCR);
+	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
+	__raw_writel(amcr, MXC_CRMAP_AMCR);
+
+	mdelay(10);
+	cpu_reset(0);
+}
+
+void mxc91231_prepare_idle(void)
+{
+	u32 crm_ctl;
+
+	/* Go to WAIT mode after WFI */
+	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
+	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
+	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
+	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index e342a2e6160..ca5c7c22634 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -34,12 +34,20 @@ config ARCH_MX3
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
+config ARCH_MXC91231
+	bool "MXC91231-based"
+	select CPU_V6
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale MXC91231 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
+source "arch/arm/mach-mxc91231/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4e7af741239..286cb9b0a25 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,6 +20,7 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
@@ -27,6 +28,7 @@ extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
@@ -34,9 +36,13 @@ extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc91231_power_off(void);
+extern void mxc91231_arch_reset(int, const char *);
+extern void mxc91231_prepare_idle(void);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bf683de56b7..15b2b148a10 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,14 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mxc91231.h>
+#define UART_PADDR	MXC91231_UART2_BASE_ADDR
+#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 569af3239c3..78db75475f6 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -46,6 +46,10 @@
 # include <mach/mx25.h>
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# include <mach/mxc91231.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index f39e016c1cc..ead9d592168 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -26,6 +26,8 @@
 #define MXC_GPIO_IRQS		(32 * 3)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MXC91231
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 42db7394111..d3afafdcc0e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -24,6 +24,8 @@
 #define PHYS_OFFSET		UL(0x80000000)
 #elif defined CONFIG_ARCH_MX25
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MXC91231
+#define PHYS_OFFSET		UL(0x90000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 882b816729b..51990536b84 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
@@ -107,13 +108,25 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MXC91231
+# endif
+# define cpu_is_mxc91231()	(mxc_cpu_type == MXC_CPU_MXC91231)
+#else
+# define cpu_is_mxc91231()	(0)
+#endif
+
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
 #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
new file mode 100644
index 00000000000..81484d1ef23
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -0,0 +1,315 @@
+/*
+ *  Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - Platform specific register memory map
+ *
+ *  Copyright 2005-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __MACH_MXC91231_H__
+#define __MACH_MXC91231_H__
+
+/*
+ * L2CC
+ */
+#define MXC91231_L2CC_BASE_ADDR		0x30000000
+#define MXC91231_L2CC_BASE_ADDR_VIRT	0xF9000000
+#define MXC91231_L2CC_SIZE		SZ_64K
+
+/*
+ * AIPS 1
+ */
+#define MXC91231_AIPS1_BASE_ADDR	0x43F00000
+#define MXC91231_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MXC91231_AIPS1_SIZE		SZ_1M
+
+#define MXC91231_AIPS1_CTRL_BASE_ADDR	MXC91231_AIPS1_BASE_ADDR
+#define MXC91231_MAX_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x04000)
+#define MXC91231_EVTMON_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x08000)
+#define MXC91231_CLKCTL_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x0C000)
+#define MXC91231_ETB_SLOT4_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x10000)
+#define MXC91231_ETB_SLOT5_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x14000)
+#define MXC91231_ECT_CTIO_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x18000)
+#define MXC91231_I2C_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x80000)
+#define MXC91231_MU_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x88000)
+#define MXC91231_UART1_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x90000)
+#define MXC91231_UART2_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x94000)
+#define MXC91231_DSM_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x98000)
+#define MXC91231_OWIRE_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x9C000)
+#define MXC91231_SSI1_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA0000)
+#define MXC91231_KPP_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA8000)
+#define MXC91231_IOMUX_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xAC000)
+#define MXC91231_CTI_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xB8000)
+
+/*
+ * AIPS 2
+ */
+#define MXC91231_AIPS2_BASE_ADDR	0x53F00000
+#define MXC91231_AIPS2_BASE_ADDR_VIRT	0xFC100000
+#define MXC91231_AIPS2_SIZE		SZ_1M
+
+#define MXC91231_GEMK_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x8C000)
+#define MXC91231_GPT1_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x90000)
+#define MXC91231_EPIT1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0x94000)
+#define MXC91231_SCC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xAC000)
+#define MXC91231_RNGA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xB0000)
+#define MXC91231_IPU_CTRL_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC0000)
+#define MXC91231_AUDMUX_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC4000)
+#define MXC91231_EDIO_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xC8000)
+#define MXC91231_GPIO1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xCC000)
+#define MXC91231_GPIO2_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xD0000)
+#define MXC91231_SDMA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD4000)
+#define MXC91231_RTC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD8000)
+#define MXC91231_WDOG1_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xDC000)
+#define MXC91231_PWM_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xE0000)
+#define MXC91231_GPIO3_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE4000)
+#define MXC91231_WDOG2_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE8000)
+#define MXC91231_RTIC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xEC000)
+#define MXC91231_LPMC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xF0000)
+
+/*
+ * SPBA global module 0
+ */
+#define MXC91231_SPBA0_BASE_ADDR	0x50000000
+#define MXC91231_SPBA0_BASE_ADDR_VIRT	0xFC200000
+#define MXC91231_SPBA0_SIZE		SZ_1M
+
+#define MXC91231_MMC_SDHC1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x04000)
+#define MXC91231_MMC_SDHC2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x08000)
+#define MXC91231_UART3_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x0C000)
+#define MXC91231_CSPI2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x10000)
+#define MXC91231_SSI2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x14000)
+#define MXC91231_SIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x18000)
+#define MXC91231_IIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x1C000)
+#define MXC91231_CTI_SDMA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x20000)
+#define MXC91231_USBOTG_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x24000)
+#define MXC91231_USBOTG_DATA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x28000)
+#define MXC91231_CSPI1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x30000)
+#define MXC91231_SPBA_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x3C000)
+#define MXC91231_IOMUX_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x40000)
+#define MXC91231_CRM_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x44000)
+#define MXC91231_CRM_AP_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x48000)
+#define MXC91231_PLL0_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x4C000)
+#define MXC91231_PLL1_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x50000)
+#define MXC91231_PLL2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x54000)
+#define MXC91231_GPIO4_SH_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x58000)
+#define MXC91231_HAC_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_SAHARA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_PLL3_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x60000)
+
+/*
+ * SPBA global module 1
+ */
+#define MXC91231_SPBA1_BASE_ADDR	0x52000000
+#define MXC91231_SPBA1_BASE_ADDR_VIRT	0xFC300000
+#define MXC91231_SPBA1_SIZE		SZ_1M
+
+#define MXC91231_MQSPI_BASE_ADDR	(MXC91231_SPBA1_BASE_ADDR + 0x34000)
+#define MXC91231_EL1T_BASE_ADDR		(MXC91231_SPBA1_BASE_ADDR + 0x38000)
+
+/*!
+ * Defines for SPBA modules
+ */
+#define MXC91231_SPBA_SDHC1		0x04
+#define MXC91231_SPBA_SDHC2		0x08
+#define MXC91231_SPBA_UART3		0x0C
+#define MXC91231_SPBA_CSPI2		0x10
+#define MXC91231_SPBA_SSI2		0x14
+#define MXC91231_SPBA_SIM		0x18
+#define MXC91231_SPBA_IIM		0x1C
+#define MXC91231_SPBA_CTI_SDMA		0x20
+#define MXC91231_SPBA_USBOTG_CTRL_REGS	0x24
+#define MXC91231_SPBA_USBOTG_DATA_REGS	0x28
+#define MXC91231_SPBA_CSPI1		0x30
+#define MXC91231_SPBA_MQSPI		0x34
+#define MXC91231_SPBA_EL1T		0x38
+#define MXC91231_SPBA_IOMUX		0x40
+#define MXC91231_SPBA_CRM_COM		0x44
+#define MXC91231_SPBA_CRM_AP		0x48
+#define MXC91231_SPBA_PLL0		0x4C
+#define MXC91231_SPBA_PLL1		0x50
+#define MXC91231_SPBA_PLL2		0x54
+#define MXC91231_SPBA_GPIO4		0x58
+#define MXC91231_SPBA_SAHARA		0x5C
+
+/*
+ * ROMP and AVIC
+ */
+#define MXC91231_ROMP_BASE_ADDR		0x60000000
+#define MXC91231_ROMP_BASE_ADDR_VIRT	0xFC400000
+#define MXC91231_ROMP_SIZE		SZ_64K
+
+#define MXC91231_AVIC_BASE_ADDR		0x68000000
+#define MXC91231_AVIC_BASE_ADDR_VIRT	0xFC410000
+#define MXC91231_AVIC_SIZE		SZ_64K
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MXC91231_X_MEMC_BASE_ADDR	0xB8000000
+#define MXC91231_X_MEMC_BASE_ADDR_VIRT	0xFC420000
+#define MXC91231_X_MEMC_SIZE		SZ_64K
+
+#define MXC91231_NFC_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x0000)
+#define MXC91231_ESDCTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x1000)
+#define MXC91231_WEIM_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x2000)
+#define MXC91231_M3IF_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x3000)
+#define MXC91231_EMI_CTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x4000)
+
+/*
+ * Memory regions and CS
+ * CPLD is connected on CS4
+ * CS5 is TP1021 or it is not connected
+ * */
+#define MXC91231_FB_RAM_BASE_ADDR	0x78000000
+#define MXC91231_FB_RAM_SIZE		SZ_256K
+#define MXC91231_CSD0_BASE_ADDR		0x80000000
+#define MXC91231_CSD1_BASE_ADDR		0x90000000
+#define MXC91231_CS0_BASE_ADDR		0xA0000000
+#define MXC91231_CS1_BASE_ADDR		0xA8000000
+#define MXC91231_CS2_BASE_ADDR		0xB0000000
+#define MXC91231_CS3_BASE_ADDR		0xB2000000
+#define MXC91231_CS4_BASE_ADDR		0xB4000000
+#define MXC91231_CS5_BASE_ADDR		0xB6000000
+
+/* Is given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+	(((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Is given address belongs to the specified named `module'? */
+#define MXC91231_IS_MODULE(addr, module) \
+	ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
+	                        MXC91231_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MXC91231_IO_ADDRESS(x) \
+	(void __iomem *) \
+	(MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
+	 0xDEADBEEF)
+
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MXC91231_L2CC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA0_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
+
+#define MXC91231_ROMP_IO_ADDRESS(x)  \
+	(((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
+
+#define MXC91231_AVIC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
+
+#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC91231_INT_GPIO3		0
+#define MXC91231_INT_EL1T_CI		1
+#define MXC91231_INT_EL1T_RFCI		2
+#define MXC91231_INT_EL1T_RFI		3
+#define MXC91231_INT_EL1T_MCU		4
+#define MXC91231_INT_EL1T_IPI		5
+#define MXC91231_INT_MU_GEN		6
+#define MXC91231_INT_GPIO4		7
+#define MXC91231_INT_MMC_SDHC2		8
+#define MXC91231_INT_MMC_SDHC1		9
+#define MXC91231_INT_I2C		10
+#define MXC91231_INT_SSI2		11
+#define MXC91231_INT_SSI1		12
+#define MXC91231_INT_CSPI2		13
+#define MXC91231_INT_CSPI1		14
+#define MXC91231_INT_RTIC		15
+#define MXC91231_INT_SAHARA		15
+#define MXC91231_INT_HAC		15
+#define MXC91231_INT_UART3_RX		16
+#define MXC91231_INT_UART3_TX		17
+#define MXC91231_INT_UART3_MINT		18
+#define MXC91231_INT_ECT		19
+#define MXC91231_INT_SIM_IPB		20
+#define MXC91231_INT_SIM_DATA		21
+#define MXC91231_INT_RNGA		22
+#define MXC91231_INT_DSM_AP		23
+#define MXC91231_INT_KPP		24
+#define MXC91231_INT_RTC		25
+#define MXC91231_INT_PWM		26
+#define MXC91231_INT_GEMK_AP		27
+#define MXC91231_INT_EPIT		28
+#define MXC91231_INT_GPT		29
+#define MXC91231_INT_UART2_RX		30
+#define MXC91231_INT_UART2_TX		31
+#define MXC91231_INT_UART2_MINT		32
+#define MXC91231_INT_NANDFC		33
+#define MXC91231_INT_SDMA		34
+#define MXC91231_INT_USB_WAKEUP		35
+#define MXC91231_INT_USB_SOF		36
+#define MXC91231_INT_PMU_EVTMON		37
+#define MXC91231_INT_USB_FUNC		38
+#define MXC91231_INT_USB_DMA		39
+#define MXC91231_INT_USB_CTRL		40
+#define MXC91231_INT_IPU_ERR		41
+#define MXC91231_INT_IPU_SYN		42
+#define MXC91231_INT_UART1_RX		43
+#define MXC91231_INT_UART1_TX		44
+#define MXC91231_INT_UART1_MINT		45
+#define MXC91231_INT_IIM		46
+#define MXC91231_INT_MU_RX_OR		47
+#define MXC91231_INT_MU_TX_OR		48
+#define MXC91231_INT_SCC_SCM		49
+#define MXC91231_INT_SCC_SMN		50
+#define MXC91231_INT_GPIO2		51
+#define MXC91231_INT_GPIO1		52
+#define MXC91231_INT_MQSPI1		53
+#define MXC91231_INT_MQSPI2		54
+#define MXC91231_INT_WDOG2		55
+#define MXC91231_INT_EXT_INT7		56
+#define MXC91231_INT_EXT_INT6		57
+#define MXC91231_INT_EXT_INT5		58
+#define MXC91231_INT_EXT_INT4		59
+#define MXC91231_INT_EXT_INT3		60
+#define MXC91231_INT_EXT_INT2		61
+#define MXC91231_INT_EXT_INT1		62
+#define MXC91231_INT_EXT_INT0		63
+
+#define MXC91231_MAX_INT_LINES		63
+#define MXC91231_MAX_EXT_LINES		8
+
+#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index e56241af870..ef00199568d 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,8 +21,18 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+
 static inline void arch_idle(void)
 {
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		/* Need this to set DSM low-power mode */
+		mxc91231_prepare_idle();
+	}
+#endif
+
 	cpu_do_idle();
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 0707b7d5b5c..527a6c24788 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MXC91231
+#define CLOCK_TICK_RATE		13000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 1e24499f20b..082a3908256 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -66,6 +66,7 @@ static void putc(int ch)
 #define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
+#define MX3X_UART2_BASE_ADDR	0x43F94000
 
 static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -95,6 +96,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_PCM043:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MAGX_ZN5:
+		uart_base = MX3X_UART2_BASE_ADDR;
+		break;
 	default:
 		break;
 	}
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 15e30532f4a..97f42799fa5 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
@@ -39,6 +40,12 @@ void arch_reset(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		mxc91231_arch_reset(mode, cmd);
+		return;
+	}
+#endif
 	if (cpu_is_mx1()) {
 		wcr_enable = (1 << 0);
 	} else {
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 59e33a3bf7f..844567ee35f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25 */
+/* MX31, MX35, MX25, MXC91231 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
-- 
cgit v1.2.3


From 94da274b4982f5b36b55bde0c76d3ef8233bceda Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:23 +0900
Subject: MXC: add iomux pins configuration support for MXC91231

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxc91231/Makefile                 |   2 +-
 arch/arm/mach-mxc91231/iomux.c                  | 177 +++++++++++++++
 arch/arm/mach-mxc91231/magx-zn5.c               |   4 +
 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 287 ++++++++++++++++++++++++
 4 files changed, 469 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mxc91231/iomux.c
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h

(limited to 'arch')

diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
index eb70b669c55..011d5e19712 100644
--- a/arch/arm/mach-mxc91231/Makefile
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -1,2 +1,2 @@
-obj-y	:= mm.o clock.o devices.o system.o
+obj-y	:= mm.o clock.o devices.o system.o iomux.o
 obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
new file mode 100644
index 00000000000..405d9b19d89
--- /dev/null
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mxc91231.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_AP_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
+#define IOMUX_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
+#define IOMUXSW_AP_MUX_CTL	(IOMUX_AP_BASE + 0x000)
+#define IOMUXSW_SP_MUX_CTL	(IOMUX_COM_BASE + 0x000)
+#define IOMUXSW_PAD_CTL		(IOMUX_COM_BASE + 0x200)
+
+#define IOMUXINT_OBS1		(IOMUX_AP_BASE + 0x600)
+#define IOMUXINT_OBS2		(IOMUX_AP_BASE + 0x004)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define NB_PORTS			((PIN_MAX + 32) / 32)
+#define PIN_GLOBAL_NUM(pin) \
+	(((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX +	\
+	 ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +		\
+	 ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(const unsigned int pin_mode)
+{
+	u32 side, field, l, mode, ret = 0;
+	void __iomem *reg;
+
+	side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
+	switch (side) {
+	case MUX_SIDE_AP:
+		reg = IOMUXSW_AP_MUX_CTL;
+		break;
+	case MUX_SIDE_SP:
+		reg = IOMUXSW_SP_MUX_CTL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
+	field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
+	mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 padgrp, field, l;
+	void __iomem *reg;
+
+	padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EBUSY;
+	}
+	mxc_iomux_mode(pin_mode);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin_mode)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+	unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 8757573b0a8..7dbe4ca12ef 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-mxc91231.h>
 #include <mach/mmc.h>
 #include <mach/imx-uart.h>
 
@@ -29,6 +30,9 @@ static void __init zn5_init(void)
 {
 	pm_power_off = mxc91231_power_off;
 
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
new file mode 100644
index 00000000000..9f13061192c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MACH_IOMUX_MXC91231_H__
+#define __MACH_IOMUX_MXC91231_H__
+
+/*
+ * various IOMUX output functions
+ */
+
+#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
+#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
+#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
+#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
+#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
+#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
+#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
+#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
+#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
+#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
+#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
+#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label);
+
+/*
+ * releases a single pin:
+ * 	- make it available for a future use by another driver
+ * 	- frees the GPIO if the pin was configured as GPIO
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_release_pin(const unsigned int pin_mode);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+
+#define MUX_SIDE_AP		(0)
+#define MUX_SIDE_SP		(1)
+
+#define MUX_SIDE_SHIFT		(26)
+#define MUX_SIDE_MASK		(0x1 << MUX_SIDE_SHIFT)
+
+#define MUX_GPIO_PORT_SHIFT	(23)
+#define MUX_GPIO_PORT_MASK	(0x7 << MUX_GPIO_PORT_SHIFT)
+
+#define MUX_GPIO_PIN_SHIFT	(20)
+#define MUX_GPIO_PIN_MASK	(0x1f << MUX_GPIO_PIN_SHIFT)
+
+#define MUX_REG_SHIFT		(15)
+#define MUX_REG_MASK		(0x1f << MUX_REG_SHIFT)
+
+#define MUX_FIELD_SHIFT		(13)
+#define MUX_FIELD_MASK		(0x3 << MUX_FIELD_SHIFT)
+
+#define MUX_PADGRP_SHIFT	(8)
+#define MUX_PADGRP_MASK		(0x1f << MUX_PADGRP_SHIFT)
+
+#define MUX_PIN_MASK		(0xffffff << 8)
+
+#define GPIO_PORT_MAX		(3)
+
+#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
+	(((side) << MUX_SIDE_SHIFT) |		  \
+	 (gport << MUX_GPIO_PORT_SHIFT) |		\
+	 ((gpin) << MUX_GPIO_PIN_SHIFT) |		\
+	 ((ctlreg) << MUX_REG_SHIFT) |		\
+	 ((ctlfield) << MUX_FIELD_SHIFT) |		\
+	 ((padgrp) << MUX_PADGRP_SHIFT))
+
+#define MUX_MODE_OUT_SHIFT	(4)
+#define MUX_MODE_IN_SHIFT	(0)
+#define MUX_MODE_SHIFT		(0)
+#define MUX_MODE_MASK		(0xff << MUX_MODE_SHIFT)
+
+#define IOMUX_MODE(pin, mode) \
+	(pin | (mode << MUX_MODE_SHIFT))
+
+enum iomux_pins {
+	/* AP Side pins */
+	MXC91231_PIN_AP_CLE		= IOMUX_PIN(0, 0,  0,  0, 0, 24),
+	MXC91231_PIN_AP_ALE		= IOMUX_PIN(0, 0,  1,  0, 1, 24),
+	MXC91231_PIN_AP_CE_B		= IOMUX_PIN(0, 0,  2,  0, 2, 24),
+	MXC91231_PIN_AP_RE_B		= IOMUX_PIN(0, 0,  3,  0, 3, 24),
+	MXC91231_PIN_AP_WE_B		= IOMUX_PIN(0, 0,  4,  1, 0, 24),
+	MXC91231_PIN_AP_WP_B		= IOMUX_PIN(0, 0,  5,  1, 1, 24),
+	MXC91231_PIN_AP_BSY_B		= IOMUX_PIN(0, 0,  6,  1, 2, 24),
+	MXC91231_PIN_AP_U1_TXD		= IOMUX_PIN(0, 0,  7,  1, 3, 28),
+	MXC91231_PIN_AP_U1_RXD		= IOMUX_PIN(0, 0,  8,  2, 0, 28),
+	MXC91231_PIN_AP_U1_RTS_B	= IOMUX_PIN(0, 0,  9,  2, 1, 28),
+	MXC91231_PIN_AP_U1_CTS_B	= IOMUX_PIN(0, 0, 10,  2, 2, 28),
+	MXC91231_PIN_AP_AD1_TXD		= IOMUX_PIN(0, 0, 11,  2, 3,  9),
+	MXC91231_PIN_AP_AD1_RXD		= IOMUX_PIN(0, 0, 12,  3, 0,  9),
+	MXC91231_PIN_AP_AD1_TXC		= IOMUX_PIN(0, 0, 13,  3, 1,  9),
+	MXC91231_PIN_AP_AD1_TXFS	= IOMUX_PIN(0, 0, 14,  3, 2,  9),
+	MXC91231_PIN_AP_AD2_TXD		= IOMUX_PIN(0, 0, 15,  3, 3,  9),
+	MXC91231_PIN_AP_AD2_RXD		= IOMUX_PIN(0, 0, 16,  4, 0,  9),
+	MXC91231_PIN_AP_AD2_TXC		= IOMUX_PIN(0, 0, 17,  4, 1,  9),
+	MXC91231_PIN_AP_AD2_TXFS	= IOMUX_PIN(0, 0, 18,  4, 2,  9),
+	MXC91231_PIN_AP_OWDAT		= IOMUX_PIN(0, 0, 19,  4, 3, 28),
+	MXC91231_PIN_AP_IPU_LD17	= IOMUX_PIN(0, 0, 20,  5, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_VSYNC	= IOMUX_PIN(0, 0, 21,  5, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_HSYNC	= IOMUX_PIN(0, 0, 22,  5, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLK	= IOMUX_PIN(0, 0, 23,  5, 3, 28),
+	MXC91231_PIN_AP_IPU_D3_DRDY	= IOMUX_PIN(0, 0, 24,  6, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_CONTR	= IOMUX_PIN(0, 0, 25,  6, 1, 28),
+	MXC91231_PIN_AP_IPU_D0_CS	= IOMUX_PIN(0, 0, 26,  6, 2, 28),
+	MXC91231_PIN_AP_IPU_LD16	= IOMUX_PIN(0, 0, 27,  6, 3, 28),
+	MXC91231_PIN_AP_IPU_D2_CS	= IOMUX_PIN(0, 0, 28,  7, 0, 28),
+	MXC91231_PIN_AP_IPU_PAR_RS	= IOMUX_PIN(0, 0, 29,  7, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_PS	= IOMUX_PIN(0, 0, 30,  7, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLS	= IOMUX_PIN(0, 0, 31,  7, 3, 28),
+	MXC91231_PIN_AP_IPU_RD		= IOMUX_PIN(0, 1,  0,  8, 0, 28),
+	MXC91231_PIN_AP_IPU_WR		= IOMUX_PIN(0, 1,  1,  8, 1, 28),
+	MXC91231_PIN_AP_IPU_LD0		= IOMUX_PIN(0, 7,  0,  8, 2, 28),
+	MXC91231_PIN_AP_IPU_LD1		= IOMUX_PIN(0, 7,  0,  8, 3, 28),
+	MXC91231_PIN_AP_IPU_LD2		= IOMUX_PIN(0, 7,  0,  9, 0, 28),
+	MXC91231_PIN_AP_IPU_LD3		= IOMUX_PIN(0, 1,  2,  9, 1, 28),
+	MXC91231_PIN_AP_IPU_LD4		= IOMUX_PIN(0, 1,  3,  9, 2, 28),
+	MXC91231_PIN_AP_IPU_LD5		= IOMUX_PIN(0, 1,  4,  9, 3, 28),
+	MXC91231_PIN_AP_IPU_LD6		= IOMUX_PIN(0, 1,  5, 10, 0, 28),
+	MXC91231_PIN_AP_IPU_LD7		= IOMUX_PIN(0, 1,  6, 10, 1, 28),
+	MXC91231_PIN_AP_IPU_LD8		= IOMUX_PIN(0, 1,  7, 10, 2, 28),
+	MXC91231_PIN_AP_IPU_LD9		= IOMUX_PIN(0, 1,  8, 10, 3, 28),
+	MXC91231_PIN_AP_IPU_LD10	= IOMUX_PIN(0, 1,  9, 11, 0, 28),
+	MXC91231_PIN_AP_IPU_LD11	= IOMUX_PIN(0, 1, 10, 11, 1, 28),
+	MXC91231_PIN_AP_IPU_LD12	= IOMUX_PIN(0, 1, 11, 11, 2, 28),
+	MXC91231_PIN_AP_IPU_LD13	= IOMUX_PIN(0, 1, 12, 11, 3, 28),
+	MXC91231_PIN_AP_IPU_LD14	= IOMUX_PIN(0, 1, 13, 12, 0, 28),
+	MXC91231_PIN_AP_IPU_LD15	= IOMUX_PIN(0, 1, 14, 12, 1, 28),
+	MXC91231_PIN_AP_KPROW4		= IOMUX_PIN(0, 7,  0, 12, 2, 10),
+	MXC91231_PIN_AP_KPROW5		= IOMUX_PIN(0, 1, 16, 12, 3, 10),
+	MXC91231_PIN_AP_GPIO_AP_B17	= IOMUX_PIN(0, 1, 17, 13, 0, 10),
+	MXC91231_PIN_AP_GPIO_AP_B18	= IOMUX_PIN(0, 1, 18, 13, 1, 10),
+	MXC91231_PIN_AP_KPCOL3		= IOMUX_PIN(0, 1, 19, 13, 2, 11),
+	MXC91231_PIN_AP_KPCOL4		= IOMUX_PIN(0, 1, 20, 13, 3, 11),
+	MXC91231_PIN_AP_KPCOL5		= IOMUX_PIN(0, 1, 21, 14, 0, 11),
+	MXC91231_PIN_AP_GPIO_AP_B22	= IOMUX_PIN(0, 1, 22, 14, 1, 11),
+	MXC91231_PIN_AP_GPIO_AP_B23	= IOMUX_PIN(0, 1, 23, 14, 2, 11),
+	MXC91231_PIN_AP_CSI_D0		= IOMUX_PIN(0, 1, 24, 14, 3, 21),
+	MXC91231_PIN_AP_CSI_D1		= IOMUX_PIN(0, 1, 25, 15, 0, 21),
+	MXC91231_PIN_AP_CSI_D2		= IOMUX_PIN(0, 1, 26, 15, 1, 21),
+	MXC91231_PIN_AP_CSI_D3		= IOMUX_PIN(0, 1, 27, 15, 2, 21),
+	MXC91231_PIN_AP_CSI_D4		= IOMUX_PIN(0, 1, 28, 15, 3, 21),
+	MXC91231_PIN_AP_CSI_D5		= IOMUX_PIN(0, 1, 29, 16, 0, 21),
+	MXC91231_PIN_AP_CSI_D6		= IOMUX_PIN(0, 1, 30, 16, 1, 21),
+	MXC91231_PIN_AP_CSI_D7		= IOMUX_PIN(0, 1, 31, 16, 2, 21),
+	MXC91231_PIN_AP_CSI_D8		= IOMUX_PIN(0, 2,  0, 16, 3, 21),
+	MXC91231_PIN_AP_CSI_D9		= IOMUX_PIN(0, 2,  1, 17, 0, 21),
+	MXC91231_PIN_AP_CSI_MCLK	= IOMUX_PIN(0, 2,  2, 17, 1, 21),
+	MXC91231_PIN_AP_CSI_VSYNC	= IOMUX_PIN(0, 2,  3, 17, 2, 21),
+	MXC91231_PIN_AP_CSI_HSYNC	= IOMUX_PIN(0, 2,  4, 17, 3, 21),
+	MXC91231_PIN_AP_CSI_PIXCLK	= IOMUX_PIN(0, 2,  5, 18, 0, 21),
+	MXC91231_PIN_AP_I2CLK		= IOMUX_PIN(0, 2,  6, 18, 1, 12),
+	MXC91231_PIN_AP_I2DAT		= IOMUX_PIN(0, 2,  7, 18, 2, 12),
+	MXC91231_PIN_AP_GPIO_AP_C8	= IOMUX_PIN(0, 2,  8, 18, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C9	= IOMUX_PIN(0, 2,  9, 19, 0,  9),
+	MXC91231_PIN_AP_GPIO_AP_C10	= IOMUX_PIN(0, 2, 10, 19, 1,  9),
+	MXC91231_PIN_AP_GPIO_AP_C11	= IOMUX_PIN(0, 2, 11, 19, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C12	= IOMUX_PIN(0, 2, 12, 19, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C13	= IOMUX_PIN(0, 2, 13, 20, 0, 28),
+	MXC91231_PIN_AP_GPIO_AP_C14	= IOMUX_PIN(0, 2, 14, 20, 1, 28),
+	MXC91231_PIN_AP_GPIO_AP_C15	= IOMUX_PIN(0, 2, 15, 20, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C16	= IOMUX_PIN(0, 2, 16, 20, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C17	= IOMUX_PIN(0, 2, 17, 21, 0,  9),
+	MXC91231_PIN_AP_ED_INT0		= IOMUX_PIN(0, 2, 18, 21, 1, 22),
+	MXC91231_PIN_AP_ED_INT1		= IOMUX_PIN(0, 2, 19, 21, 2, 22),
+	MXC91231_PIN_AP_ED_INT2		= IOMUX_PIN(0, 2, 20, 21, 3, 22),
+	MXC91231_PIN_AP_ED_INT3		= IOMUX_PIN(0, 2, 21, 22, 0, 22),
+	MXC91231_PIN_AP_ED_INT4		= IOMUX_PIN(0, 2, 22, 22, 1, 23),
+	MXC91231_PIN_AP_ED_INT5		= IOMUX_PIN(0, 2, 23, 22, 2, 23),
+	MXC91231_PIN_AP_ED_INT6		= IOMUX_PIN(0, 2, 24, 22, 3, 23),
+	MXC91231_PIN_AP_ED_INT7		= IOMUX_PIN(0, 2, 25, 23, 0, 23),
+	MXC91231_PIN_AP_U2_DSR_B	= IOMUX_PIN(0, 2, 26, 23, 1, 28),
+	MXC91231_PIN_AP_U2_RI_B		= IOMUX_PIN(0, 2, 27, 23, 2, 28),
+	MXC91231_PIN_AP_U2_CTS_B	= IOMUX_PIN(0, 2, 28, 23, 3, 28),
+	MXC91231_PIN_AP_U2_DTR_B	= IOMUX_PIN(0, 2, 29, 24, 0, 28),
+	MXC91231_PIN_AP_KPROW0		= IOMUX_PIN(0, 7,  0, 24, 1, 10),
+	MXC91231_PIN_AP_KPROW1		= IOMUX_PIN(0, 1, 15, 24, 2, 10),
+	MXC91231_PIN_AP_KPROW2		= IOMUX_PIN(0, 7,  0, 24, 3, 10),
+	MXC91231_PIN_AP_KPROW3		= IOMUX_PIN(0, 7,  0, 25, 0, 10),
+	MXC91231_PIN_AP_KPCOL0		= IOMUX_PIN(0, 7,  0, 25, 1, 11),
+	MXC91231_PIN_AP_KPCOL1		= IOMUX_PIN(0, 7,  0, 25, 2, 11),
+	MXC91231_PIN_AP_KPCOL2		= IOMUX_PIN(0, 7,  0, 25, 3, 11),
+
+	/* Shared pins */
+	MXC91231_PIN_SP_U3_TXD		= IOMUX_PIN(1, 3,  0,  0, 0, 28),
+	MXC91231_PIN_SP_U3_RXD		= IOMUX_PIN(1, 3,  1,  0, 1, 28),
+	MXC91231_PIN_SP_U3_RTS_B	= IOMUX_PIN(1, 3,  2,  0, 2, 28),
+	MXC91231_PIN_SP_U3_CTS_B	= IOMUX_PIN(1, 3,  3,  0, 3, 28),
+	MXC91231_PIN_SP_USB_TXOE_B	= IOMUX_PIN(1, 3,  4,  1, 0, 28),
+	MXC91231_PIN_SP_USB_DAT_VP	= IOMUX_PIN(1, 3,  5,  1, 1, 28),
+	MXC91231_PIN_SP_USB_SE0_VM	= IOMUX_PIN(1, 3,  6,  1, 2, 28),
+	MXC91231_PIN_SP_USB_RXD		= IOMUX_PIN(1, 3,  7,  1, 3, 28),
+	MXC91231_PIN_SP_UH2_TXOE_B	= IOMUX_PIN(1, 3,  8,  2, 0, 28),
+	MXC91231_PIN_SP_UH2_SPEED	= IOMUX_PIN(1, 3,  9,  2, 1, 28),
+	MXC91231_PIN_SP_UH2_SUSPEN	= IOMUX_PIN(1, 3, 10,  2, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDP	= IOMUX_PIN(1, 3, 11,  2, 3, 28),
+	MXC91231_PIN_SP_UH2_RXDP	= IOMUX_PIN(1, 3, 12,  3, 0, 28),
+	MXC91231_PIN_SP_UH2_RXDM	= IOMUX_PIN(1, 3, 13,  3, 1, 28),
+	MXC91231_PIN_SP_UH2_OVR		= IOMUX_PIN(1, 3, 14,  3, 2, 28),
+	MXC91231_PIN_SP_UH2_PWR		= IOMUX_PIN(1, 3, 15,  3, 3, 28),
+	MXC91231_PIN_SP_SD1_DAT0	= IOMUX_PIN(1, 3, 16,  4, 0, 25),
+	MXC91231_PIN_SP_SD1_DAT1	= IOMUX_PIN(1, 3, 17,  4, 1, 25),
+	MXC91231_PIN_SP_SD1_DAT2	= IOMUX_PIN(1, 3, 18,  4, 2, 25),
+	MXC91231_PIN_SP_SD1_DAT3	= IOMUX_PIN(1, 3, 19,  4, 3, 25),
+	MXC91231_PIN_SP_SD1_CMD		= IOMUX_PIN(1, 3, 20,  5, 0, 25),
+	MXC91231_PIN_SP_SD1_CLK		= IOMUX_PIN(1, 3, 21,  5, 1, 25),
+	MXC91231_PIN_SP_SD2_DAT0	= IOMUX_PIN(1, 3, 22,  5, 2, 26),
+	MXC91231_PIN_SP_SD2_DAT1	= IOMUX_PIN(1, 3, 23,  5, 3, 26),
+	MXC91231_PIN_SP_SD2_DAT2	= IOMUX_PIN(1, 3, 24,  6, 0, 26),
+	MXC91231_PIN_SP_SD2_DAT3	= IOMUX_PIN(1, 3, 25,  6, 1, 26),
+	MXC91231_PIN_SP_GPIO_SP_A26	= IOMUX_PIN(1, 3, 26,  6, 2, 28),
+	MXC91231_PIN_SP_SPI1_CLK	= IOMUX_PIN(1, 3, 27,  6, 3, 13),
+	MXC91231_PIN_SP_SPI1_MOSI	= IOMUX_PIN(1, 3, 28,  7, 0, 13),
+	MXC91231_PIN_SP_SPI1_MISO	= IOMUX_PIN(1, 3, 29,  7, 1, 13),
+	MXC91231_PIN_SP_SPI1_SS0	= IOMUX_PIN(1, 3, 30,  7, 2, 13),
+	MXC91231_PIN_SP_SPI1_SS1	= IOMUX_PIN(1, 3, 31,  7, 3, 13),
+	MXC91231_PIN_SP_SD2_CMD		= IOMUX_PIN(1, 7,  0,  8, 0, 26),
+	MXC91231_PIN_SP_SD2_CLK		= IOMUX_PIN(1, 7,  0,  8, 1, 26),
+	MXC91231_PIN_SP_SIM1_RST_B	= IOMUX_PIN(1, 2, 30,  8, 2, 28),
+	MXC91231_PIN_SP_SIM1_SVEN	= IOMUX_PIN(1, 7,  0,  8, 3, 28),
+	MXC91231_PIN_SP_SIM1_CLK	= IOMUX_PIN(1, 7,  0,  9, 0, 28),
+	MXC91231_PIN_SP_SIM1_TRXD	= IOMUX_PIN(1, 7,  0,  9, 1, 28),
+	MXC91231_PIN_SP_SIM1_PD		= IOMUX_PIN(1, 2, 31,  9, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDM	= IOMUX_PIN(1, 7,  0,  9, 3, 28),
+	MXC91231_PIN_SP_UH2_RXD		= IOMUX_PIN(1, 7,  0, 10, 0, 28),
+};
+
+#define PIN_AP_MAX	(104)
+#define PIN_SP_MAX	(41)
+
+#define PIN_MAX		(PIN_AP_MAX + PIN_SP_MAX)
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MXC91231_PIN_(pin name)__(function)
+ */
+
+#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
+#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
+
+
+#endif /* __MACH_IOMUX_MXC91231_H__ */
-- 
cgit v1.2.3


From 89829d5fe31dc42825f2560c3c2c641709ed594e Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:10 +0200
Subject: mx31: added one more pin definition

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index a3b206ce78b..67452732794 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -682,6 +682,7 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
cgit v1.2.3


From b23f1534bb0e0dc97e46fc52bf9bde0c2226763c Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:11 +0200
Subject: mx31moboard: added usb xcvr reset for mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 30 ++++++++++++++++--------------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 28 +++++++++++++++-------------
 arch/arm/mach-mx3/mx31moboard.c          | 18 ++++++++++++++++++
 3 files changed, 49 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405165a..2f2f142f075 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -116,23 +116,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void devboard_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6153a..b817a4a5bcb 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -120,23 +120,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void marxbot_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b86b8a757c9..53ce60bdc82 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,6 +16,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -56,6 +57,8 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+	/* USB reset */
+	MX31_PIN_GPIO1_0__GPIO1_0,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -143,6 +146,19 @@ static struct imxmmc_platform_data sdhc1_pdata = {
 	.exit	= moboard_sdhc1_exit,
 };
 
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(1);
+	gpio_set_value(USB_RESET_B, 1);
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -168,6 +184,8 @@ static void __init mxc_board_init(void)
 
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	usb_xcvr_reset();
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
cgit v1.2.3


From 88b05647171460b1d479371690876f8ac5957d42 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:12 +0200
Subject: mx31moboard: move usb otg support back to moboard common file

since all boards finally have this device

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 45 --------------------------------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 45 --------------------------------
 arch/arm/mach-mx3/mx31moboard.c          | 45 ++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 90 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 2f2f142f075..b3e8f251ac7 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -111,35 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -153,7 +111,4 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	devboard_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index b817a4a5bcb..53ce7ff0637 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -48,18 +47,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -115,35 +102,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void marxbot_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -155,7 +113,4 @@ void __init mx31moboard_marxbot_init(void)
 		"marxbot");
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	marxbot_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 53ce60bdc82..2852bd58eda 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -59,6 +60,18 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
 	/* USB reset */
 	MX31_PIN_GPIO1_0__GPIO1_0,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -159,6 +172,35 @@ static void usb_xcvr_reset(void)
 	gpio_set_value(USB_RESET_B, 1);
 }
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -186,6 +228,9 @@ static void __init mxc_board_init(void)
 
 	usb_xcvr_reset();
 
+	moboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
cgit v1.2.3


From f420db843b7756e5d0d052b00472c94154f50c93 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:14 +0100
Subject: MX2: Add SPI devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  4 +++
 2 files changed, 72 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 4ecf0977beb..62810cbe4e3 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,6 +39,74 @@
 
 #include "devices.h"
 
+/*
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
+ */
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+#endif
+
 /*
  * General Purpose Timer
  * - i.MX21: 3 timers
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 6e91b4e3509..d315406d672 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -23,3 +23,7 @@ extern struct platform_device mxc_otg_udc_device;
 extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
-- 
cgit v1.2.3


From d37ba97d49703be4e71f786cffcee4dfe73fa93c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:15 +0100
Subject: MX31: add spi controller devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 61 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 +++
 2 files changed, 64 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 4e728a29196..cde1b079242 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -455,6 +455,67 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
+/*
+ * SPI master controller
+ * 3 channels
+ */
+static struct resource imx_spi_0_resources[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_1_resources[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_2_resources[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
+	.resource = imx_spi_0_resources,
+};
+
+struct platform_device imx_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
+	.resource = imx_spi_1_resources,
+};
+
+struct platform_device imx_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
+	.resource = imx_spi_2_resources,
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 81614319755..79f2be45d13 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,4 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
+extern struct platform_device imx_spi_device0;
+extern struct platform_device imx_spi_device1;
+extern struct platform_device imx_spi_device2;
 
-- 
cgit v1.2.3


From 547270a3b9f2deb9590b65e8fc351e5399ddf15d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 17 Mar 2009 15:43:54 +0100
Subject: i.MX35 clock support: Add USB clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 1dbcdc07257..fe5c4217322 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -273,6 +273,19 @@ static unsigned long get_rate_csi(struct clk *clk)
 	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
 }
 
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long rate;
+
+	if (pdr4 & (1 << 9))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+}
+
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
@@ -365,7 +378,7 @@ DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
 DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
 DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
 DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
@@ -426,7 +439,10 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
-- 
cgit v1.2.3


From 337316986f0531e1681c409de9b73af0bc6dc7bb Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 6 Aug 2009 11:19:39 +0200
Subject: mx27: add support for phytec pca100 (phyCARD-s) board

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig  |   7 ++
 arch/arm/mach-mx2/Makefile |   2 +
 arch/arm/mach-mx2/pca100.c | 244 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 253 insertions(+)
 create mode 100644 arch/arm/mach-mx2/pca100.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 0c28a37bc14..c8a2eac4d13 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -95,4 +95,11 @@ config MACH_MX27LITE
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	depends on MACH_MX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 8b6846c4226..19560f04563 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -19,3 +19,5 @@ obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 00000000000..fe5b165b88c
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
-- 
cgit v1.2.3


From 7bc07ebc7d2e9ad57baf205840ce31e9243ed5e8 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 17 Apr 2009 16:52:25 +0200
Subject: mx3x: Fixup USB base addresses

The i.MX31 and the i.MX35 have different USB base addresses. Adjust
the resources accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c           | 20 ++++++++++++++------
 arch/arm/plat-mxc/include/mach/mx31.h |  2 +-
 arch/arm/plat-mxc/include/mach/mx35.h |  1 +
 3 files changed, 16 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index cde1b079242..8a577f36725 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -366,8 +366,8 @@ struct platform_device mx3_camera = {
 
 static struct resource otg_resources[] = {
 	{
-		.start	= OTG_BASE_ADDR,
-		.end	= OTG_BASE_ADDR + 0x1ff,
+		.start	= MX31_OTG_BASE_ADDR,
+		.end	= MX31_OTG_BASE_ADDR + 0x1ff,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_USB3,
@@ -408,8 +408,8 @@ static u64 usbh1_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh1_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x200,
-		.end = OTG_BASE_ADDR + 0x3ff,
+		.start = MX31_OTG_BASE_ADDR + 0x200,
+		.end = MX31_OTG_BASE_ADDR + 0x3ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB1,
@@ -434,8 +434,8 @@ static u64 usbh2_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh2_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x400,
-		.end = OTG_BASE_ADDR + 0x5ff,
+		.start = MX31_OTG_BASE_ADDR + 0x400,
+		.end = MX31_OTG_BASE_ADDR + 0x5ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB2,
@@ -547,6 +547,14 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		otg_resources[0].start = MX35_OTG_BASE_ADDR;
+		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
+		otg_resources[1].start = MXC_INT_USBOTG;
+		otg_resources[1].end = MXC_INT_USBOTG;
+		mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
+		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
+		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
+		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
 	}
 
 	return 0;
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0b06941b613..14ac0dcc82f 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -4,7 +4,7 @@
 #define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
+#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
 #define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6465fefb42e..ab4cfec6c8a 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -5,6 +5,7 @@
 #define MX35_IRAM_SIZE		SZ_128K
 
 #define MXC_FEC_BASE_ADDR	0x50038000
+#define MX35_OTG_BASE_ADDR	0x53ff4000
 #define MX35_NFC_BASE_ADDR	0xBB000000
 
 /*
-- 
cgit v1.2.3


From 3fd2691a1dc80e42e6524bcbc228b1d35424d013 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 20 Mar 2009 19:25:01 +0100
Subject: MX31 Fix spi clock names

Fix the SPI clock names to match the device names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 4742554e996..06bd6180bfc 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -525,9 +525,9 @@ DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
 	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
-- 
cgit v1.2.3


From 0160651a65d091f9fb3b7955347e04c1125765f8 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 12:21:51 +0200
Subject: pcm038: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx2/pcm038.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 9a3483c8f58..ee65dda584c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -216,6 +216,9 @@ static void __init pcm038_init(void)
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
 
+	/* PE18 for user-LED D40 */
+	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
-- 
cgit v1.2.3


From 8d5c1ed3f639f6ae012332d8ccdff429f3f11823 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 14:15:22 +0200
Subject: pcm043: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm043.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e43276ea3b7..e18a224671f 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -202,7 +202,8 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+	/* gpio */
+	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
 /*
-- 
cgit v1.2.3


From e0fd4db372896d74e63097ee6463f97736440529 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 16:44:18 +0200
Subject: pcm037: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b1b3282d15d..6cbaabedf38 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -170,6 +170,8 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
 	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	/* GPIO */
+	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
-- 
cgit v1.2.3


From 4bd1527a64f847a8aaec4f6055d9498db2646626 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:18 +0200
Subject: mx31: define various GPIOs used on mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 67452732794..446f8676381 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -683,6 +683,17 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRX0__GPIO2_2		IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SIMPD0__GPIO2_3	IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DTR_DCE1__GPIO2_8	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
cgit v1.2.3


From 77aa561db19229a36859018277f41be88684b487 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:19 +0200
Subject: mx31moboard: support for the 4 leds used on mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 2852bd58eda..ac337d26409 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -72,6 +73,9 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* LEDs */
+	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -201,8 +205,39 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+static struct gpio_led mx31moboard_leds[] = {
+	{
+		.name 	= "coreboard-led-0:red:running",
+		.default_trigger = "heartbeat",
+		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+	}, {
+		.name	= "coreboard-led-1:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
+	}, {
+		.name	= "coreboard-led-2:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
+	}, {
+		.name	= "coreboard-led-3:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+	},
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
+	.leds		= mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mx31moboard_led_pdata,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
+	&mx31moboard_leds_device,
 };
 
 static int mx31moboard_baseboard;
-- 
cgit v1.2.3


From 8b1a540c245d68a77dbd909359cfc709b6a3a1bf Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:20 +0200
Subject: mx31moboard: initialize 4 input gpios for mx31moboard

These gpios are exported to userspace and are here to be used as
a selector

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index ac337d26409..d3c6bb26271 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -76,6 +76,9 @@ static unsigned int moboard_pins[] = {
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -235,6 +238,34 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
@@ -256,6 +287,8 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mx31moboard_init_sel_gpios();
+
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
-- 
cgit v1.2.3


From 2718c15c5fffa9d05e5076451ab4fc81caac313f Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:21 +0200
Subject: mx31moboard: two GPIOS are used to reset other microcontrolers on the
 robot

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-marxbot.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 53ce7ff0637..3e2b73051b9 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -47,6 +47,8 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
+	/* dsPIC resets */
+	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -102,6 +104,22 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
+#define TRSLAT_RST_B	IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B	IOMUX_TO_GPIO(MX31_PIN_SRXD5)
+
+static void dspics_resets_init(void)
+{
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 1);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+		gpio_direction_output(DSPICS_RST_B, 1);
+		gpio_export(DSPICS_RST_B, false);
+	}
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -112,5 +130,7 @@ void __init mx31moboard_marxbot_init(void)
 	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
 		"marxbot");
 
+	dspics_resets_init();
+
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 }
-- 
cgit v1.2.3


From f6d2fa7dcbd438da4d150f695ebd219419a325ce Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:02:30 +0200
Subject: MX21: Compilation fix for devices.c

The OTG devices are only available on i.MX27, so ifdef
them out for i.MX21.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 62810cbe4e3..50199aff014 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -437,6 +437,7 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+#ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
 	{
 		.start	= OTG_BASE_ADDR,
@@ -527,7 +528,7 @@ struct platform_device mxc_usbh2 = {
 	.resource = mxc_usbh2_resources,
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
-
+#endif
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-- 
cgit v1.2.3


From c35d3a418149f145ff0d90833db3e298e88de1ad Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:04:44 +0200
Subject: mx21ads: Fix framebuffer platform data

struct imx_fb_platform_data has changed and the mx21ads was
forgotten to change. Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx21ads.c | 44 ++++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a525783ceea..cf5f77cbc2f 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
  */
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
+
 static struct imx_fb_platform_data mx21ads_fb_data = {
-	.pixclock       = 188679, /* in ps */
-	.xres           = 240,
-	.yres           = 320,
-
-	.bpp            = 16,
-	.hsync_len      = 2,
-	.left_margin    = 6,
-	.right_margin   = 16,
-
-	.vsync_len      = 1,
-	.upper_margin   = 8,
-	.lower_margin   = 10,
-	.fixed_screen_cpu = 0,
-
-	.pcr            = 0xFB108BC7,
-	.pwmr           = 0x00A901ff,
-	.lscr1          = 0x00120300,
-	.dmacr          = 0x00020008,
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
+
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
 
 	.init = mx21ads_fb_init,
 	.exit = mx21ads_fb_exit,
-- 
cgit v1.2.3


From 0fc11e3618bb1f9e0640127ec84f5d2690fa3894 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 14 Aug 2009 23:58:37 +0900
Subject: sh: unwinder: Convert frame allocations to GFP_ATOMIC.

save_stack_trace_tsk() and friends can be called from atomic context (as
triggered by latencytop), and subsequently hit two problematic allocation
points that were using GFP_KERNEL (these were dwarf_unwind_stack() and
dwarf_frame_alloc_regs()). Convert these over to GFP_ATOMIC and get
latencytop working with the DWARF unwinder.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 83f3cc92549..db021361b16 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -57,7 +57,7 @@ static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
 	if (frame->num_regs >= num_regs)
 		return;
 
-	regs = kzalloc(new_size, GFP_KERNEL);
+	regs = kzalloc(new_size, GFP_ATOMIC);
 	if (!regs) {
 		printk(KERN_WARNING "Unable to allocate DWARF registers\n");
 		/*
@@ -531,7 +531,7 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 		define_ra = true;
 	}
 
-	frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+	frame = kzalloc(sizeof(*frame), GFP_ATOMIC);
 	if (!frame)
 		return NULL;
 
-- 
cgit v1.2.3


From 48e4d4604b7da52d6a56ddc821a460b183b7353d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 01:05:46 +0900
Subject: sh: stacktrace: Add reliability checks in address saving ops.

This adopts the reliability checks from the x86 stacktrace code so known
bad addresses are not recorded in the stack trace buffer.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/stacktrace.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 45b1adde3ab..a0f497bcbb4 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -38,6 +38,9 @@ static void save_stack_address(void *data, unsigned long addr, int reliable)
 {
 	struct stack_trace *trace = data;
 
+	if (!reliable)
+		return;
+
 	if (trace->skip > 0) {
 		trace->skip--;
 		return;
@@ -67,6 +70,9 @@ save_stack_address_nosched(void *data, unsigned long addr, int reliable)
 {
 	struct stack_trace *trace = (struct stack_trace *)data;
 
+	if (!reliable)
+		return;
+
 	if (in_sched_functions(addr))
 		return;
 
-- 
cgit v1.2.3


From f9967e23c10f025d85bbf66a2a5f18f016890ccb Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 01:09:03 +0900
Subject: sh: flag the default unwinder as reliable.

This flags the default unwinder as reliable, as it tends to be reliable
enough for the purposes of the stacktrace buffer. We leave the unreliable
cases for the unwind methods that we know to be completely broken.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dumpstack.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dumpstack.c b/arch/sh/kernel/dumpstack.c
index 005dc1d1146..6f5ad151340 100644
--- a/arch/sh/kernel/dumpstack.c
+++ b/arch/sh/kernel/dumpstack.c
@@ -61,7 +61,7 @@ stack_reader_dump(struct task_struct *task, struct pt_regs *regs,
 		unsigned long addr = *sp++;
 
 		if (__kernel_text_address(addr)) {
-			ops->address(data, addr, 0);
+			ops->address(data, addr, 1);
 
 			print_ftrace_graph_addr(addr, data, ops,
 						context, &graph);
-- 
cgit v1.2.3


From 606b4c992f3b28f906100f1b6eb49059909d8da7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 01:11:37 +0900
Subject: sh: stacktrace: Properly terminate the trace entry buffer.

This inserts a ULONG_MAX entry at the end of the valid entries in the
stack trace buffer so the default code doesn't need to scan to the end of
available slots. This also makes the trace buffer termination behaviour
consistent with the other architectures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/stacktrace.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index a0f497bcbb4..c2e45c48409 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -62,6 +62,8 @@ void save_stack_trace(struct stack_trace *trace)
 	unsigned long *sp = (unsigned long *)current_stack_pointer;
 
 	unwind_stack(current, NULL, sp,  &save_stack_ops, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
@@ -97,5 +99,7 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	unsigned long *sp = (unsigned long *)tsk->thread.sp;
 
 	unwind_stack(current, NULL, sp,  &save_stack_ops_nosched, trace);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
-- 
cgit v1.2.3


From 43bc61d86f8ea6edef2e02d1dc47617883fa9a9c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 01:57:36 +0900
Subject: sh: Add register alignment helpers for shared flushers.

This plugs in some register alignment helpers for the shared flushers,
allowing them to also be used on SH-5. The main rationale here is that
in the SH-5 case we have a variable ABI, where the pointer size may not
equal the register width. This register extension is taken care of by
the SH-5 code already today, and is otherwise unused on the SH-4 code.
This combines the two and allows us to kill off the SH-5 implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/system_32.h |  5 +++++
 arch/sh/include/asm/system_64.h |  5 +++++
 arch/sh/include/asm/types.h     |  2 ++
 arch/sh/mm/flush-sh4.c          | 21 ++++++++++++---------
 4 files changed, 24 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 6c68a51f1cc..d7299d69ff7 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -198,6 +198,11 @@ do {							\
 })
 #endif
 
+static inline reg_size_t register_align(void *val)
+{
+	return (unsigned long)(signed long)val;
+}
+
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 			    struct mem_access *ma);
 
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index 943acf5ea07..218b54d9d66 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -37,4 +37,9 @@ do {								\
 #define jump_to_uncached()	do { } while (0)
 #define back_to_cached()	do { } while (0)
 
+static inline reg_size_t register_align(void *val)
+{
+	return (unsigned long long)(signed long long)(signed long)val;
+}
+
 #endif /* __ASM_SH_SYSTEM_64_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
index c7f3c94837d..f8421f7ad63 100644
--- a/arch/sh/include/asm/types.h
+++ b/arch/sh/include/asm/types.h
@@ -11,8 +11,10 @@
 
 #ifdef CONFIG_SUPERH32
 typedef u16 insn_size_t;
+typedef u32 reg_size_t;
 #else
 typedef u32 insn_size_t;
+typedef u64 reg_size_t;
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
index edefc53891a..1b6b6a12a99 100644
--- a/arch/sh/mm/flush-sh4.c
+++ b/arch/sh/mm/flush-sh4.c
@@ -10,10 +10,11 @@
  */
 void __weak __flush_wback_region(void *start, int size)
 {
-	unsigned long v, cnt, end;
+	reg_size_t aligned_start, v, cnt, end;
 
-	v = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
 	cnt = (end - v) / L1_CACHE_BYTES;
 
@@ -52,10 +53,11 @@ void __weak __flush_wback_region(void *start, int size)
  */
 void __weak __flush_purge_region(void *start, int size)
 {
-	unsigned long v, cnt, end;
+	reg_size_t aligned_start, v, cnt, end;
 
-	v = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
 	cnt = (end - v) / L1_CACHE_BYTES;
 
@@ -90,10 +92,11 @@ void __weak __flush_purge_region(void *start, int size)
  */
 void __weak __flush_invalidate_region(void *start, int size)
 {
-	unsigned long v, cnt, end;
+	reg_size_t aligned_start, v, cnt, end;
 
-	v = (unsigned long)start & ~(L1_CACHE_BYTES-1);
-	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+	aligned_start = register_align(start);
+	v = aligned_start & ~(L1_CACHE_BYTES-1);
+	end = (aligned_start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
 	cnt = (end - v) / L1_CACHE_BYTES;
 
-- 
cgit v1.2.3


From 795687265d1b6f666d02ff56f6c1679a8db160a9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 02:00:54 +0900
Subject: sh64: Wire up the shared __flush_xxx_region() flushers.

Now with all of the prep work out of the way, kill off the SH-5 variants
and use the SH-4 version directly. This also takes advantage of the
unrolling that was previously done for the new version.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Makefile_64 |  2 +-
 arch/sh/mm/cache-sh5.c | 48 ------------------------------------------------
 2 files changed, 1 insertion(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64
index 2863ffb7006..66c39106d0a 100644
--- a/arch/sh/mm/Makefile_64
+++ b/arch/sh/mm/Makefile_64
@@ -9,7 +9,7 @@ mmu-$(CONFIG_MMU)	:= fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
 			   extable_64.o
 
 ifndef CONFIG_CACHE_OFF
-obj-y			+= cache-sh5.o
+obj-y			+= cache-sh5.o flush-sh4.o
 endif
 
 obj-y			+= $(mmu-y)
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 3e2d7321b63..698113fce81 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -539,54 +539,6 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
 		sh64_dcache_purge_user_pages(mm, start, end);
 	}
 }
-
-/*
- * Purge the range of addresses from the D-cache.
- *
- * The addresses lie in the superpage mapping. There's no harm if we
- * overpurge at either end - just a small performance loss.
- */
-void __flush_purge_region(void *start, int size)
-{
-	unsigned long long ullend, addr, aligned_start;
-
-	aligned_start = (unsigned long long)(signed long long)(signed long) start;
-	addr = L1_CACHE_ALIGN(aligned_start);
-	ullend = (unsigned long long) (signed long long) (signed long) start + size;
-
-	while (addr <= ullend) {
-		__asm__ __volatile__ ("ocbp %0, 0" : : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
-
-void __flush_wback_region(void *start, int size)
-{
-	unsigned long long ullend, addr, aligned_start;
-
-	aligned_start = (unsigned long long)(signed long long)(signed long) start;
-	addr = L1_CACHE_ALIGN(aligned_start);
-	ullend = (unsigned long long) (signed long long) (signed long) start + size;
-
-	while (addr < ullend) {
-		__asm__ __volatile__ ("ocbwb %0, 0" : : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
-
-void __flush_invalidate_region(void *start, int size)
-{
-	unsigned long long ullend, addr, aligned_start;
-
-	aligned_start = (unsigned long long)(signed long long)(signed long) start;
-	addr = L1_CACHE_ALIGN(aligned_start);
-	ullend = (unsigned long long) (signed long long) (signed long) start + size;
-
-	while (addr < ullend) {
-		__asm__ __volatile__ ("ocbi %0, 0" : : "r" (addr));
-		addr += L1_CACHE_BYTES;
-	}
-}
 #endif /* !CONFIG_DCACHE_DISABLED */
 
 /*
-- 
cgit v1.2.3


From e7b8b7f16edc9b363573eadf2ab2683473626071 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 02:21:16 +0900
Subject: sh: NO_CONTEXT ASID optimizations for SH-4 cache flush.

This optimizes for the cases when a CPU does not yet have a valid ASID
context associated with it, as in this case there is no work for any of
flush_cache_mm()/flush_cache_page()/flush_cache_range() to do. Based on
the the MIPS implementation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index dfc1d037947..92f87a460a8 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -330,6 +330,9 @@ loop_exit:
  */
 void flush_cache_mm(struct mm_struct *mm)
 {
+	if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
+		return;
+
 	/*
 	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
 	 * the cache is physically tagged, the data can just be left in there.
@@ -371,6 +374,9 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
 	unsigned long phys = pfn << PAGE_SHIFT;
 	unsigned int alias_mask;
 
+	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
+		return;
+
 	alias_mask = boot_cpu_data.dcache.alias_mask;
 
 	/* We only need to flush D-cache when we have alias */
@@ -413,6 +419,9 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 		       unsigned long end)
 {
+	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
+		return;
+
 	/*
 	 * If cache is only 4k-per-way, there are never any 'aliases'.  Since
 	 * the cache is physically tagged, the data can just be left in there.
-- 
cgit v1.2.3


From 112e58471de3431fbd03dee514777ad4a66a77b2 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 02:49:40 +0900
Subject: sh: TLB protection violation exception optimizations.

This adds a bit of rework to have the TLB protection violations skip the
TLB miss fastpath and go directly in to do_page_fault(), as these require
slow path handling.

Based on an earlier patch by SUGIOKA Toshinobu.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S | 30 +++++++++++++++++++-----------
 arch/sh/mm/fault_32.c          |  6 +++---
 2 files changed, 22 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 3cb531f233f..bbaf2bd118e 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -113,34 +113,33 @@ OFF_TRA	=  (16*4+6*4)
 #if defined(CONFIG_MMU)
 	.align	2
 ENTRY(tlb_miss_load)
-	bra	call_dpf
+	bra	call_handle_tlbmiss
 	 mov	#0, r5
 
 	.align	2
 ENTRY(tlb_miss_store)
-	bra	call_dpf
+	bra	call_handle_tlbmiss
 	 mov	#1, r5
 
 	.align	2
 ENTRY(initial_page_write)
-	bra	call_dpf
+	bra	call_handle_tlbmiss
 	 mov	#1, r5
 
 	.align	2
 ENTRY(tlb_protection_violation_load)
-	bra	call_dpf
+	bra	call_do_page_fault
 	 mov	#0, r5
 
 	.align	2
 ENTRY(tlb_protection_violation_store)
-	bra	call_dpf
+	bra	call_do_page_fault
 	 mov	#1, r5
 
-call_dpf:
+call_handle_tlbmiss:
 	mov.l	1f, r0
 	mov	r5, r8
 	mov.l	@r0, r6
-	mov	r6, r9
 	mov.l	2f, r0
 	sts	pr, r10
 	jsr	@r0
@@ -151,16 +150,25 @@ call_dpf:
 	 lds	r10, pr
 	rts
 	 nop
-0:	mov.l	3f, r0
-	mov	r9, r6
+0:
 	mov	r8, r5
+call_do_page_fault:
+	mov.l	1f, r0
+	mov.l	@r0, r6
+
+	sti
+
+	mov.l	3f, r0
+	mov.l	4f, r1
+	mov	r15, r4
 	jmp	@r0
-	 mov	r15, r4
+	 lds	r1, pr
 
 	.align 2
 1:	.long	MMU_TEA
-2:	.long	__do_page_fault
+2:	.long	handle_tlbmiss
 3:	.long	do_page_fault
+4:	.long	ret_from_exception
 
 	.align	2
 ENTRY(address_error_load)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index dbbdeba2cee..41840647f65 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -318,9 +318,9 @@ do_sigbus:
 /*
  * Called with interrupts disabled.
  */
-asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
-					 unsigned long writeaccess,
-					 unsigned long address)
+asmlinkage int __kprobes
+handle_tlbmiss(struct pt_regs *regs, unsigned long writeaccess,
+	       unsigned long address)
 {
 	pgd_t *pgd;
 	pud_t *pud;
-- 
cgit v1.2.3


From 8010fbe7a67c2f993cbb11b9d8b7e98528256dd1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 03:06:41 +0900
Subject: sh: TLB fast path optimizations for load/store exceptions.

This only bothers with the TLB entry flush in the case of the initial
page write exception, as it is unecessary in the case of the load/store
exceptions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S |  2 +-
 arch/sh/mm/fault_32.c          | 26 +++++++++++++-------------
 2 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index bbaf2bd118e..a701fac8ed4 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -124,7 +124,7 @@ ENTRY(tlb_miss_store)
 	.align	2
 ENTRY(initial_page_write)
 	bra	call_handle_tlbmiss
-	 mov	#1, r5
+	 mov	#2, r5
 
 	.align	2
 ENTRY(tlb_protection_violation_load)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 41840647f65..f1c93c880ed 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -327,7 +327,6 @@ handle_tlbmiss(struct pt_regs *regs, unsigned long writeaccess,
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
@@ -338,40 +337,41 @@ handle_tlbmiss(struct pt_regs *regs, unsigned long writeaccess,
 		pgd = pgd_offset_k(address);
 	} else {
 		if (unlikely(address >= TASK_SIZE || !current->mm))
-			goto out;
+			return 1;
 
 		pgd = pgd_offset(current->mm, address);
 	}
 
 	pud = pud_offset(pgd, address);
 	if (pud_none_or_clear_bad(pud))
-		goto out;
+		return 1;
 	pmd = pmd_offset(pud, address);
 	if (pmd_none_or_clear_bad(pmd))
-		goto out;
+		return 1;
 	pte = pte_offset_kernel(pmd, address);
 	entry = *pte;
 	if (unlikely(pte_none(entry) || pte_not_present(entry)))
-		goto out;
+		return 1;
 	if (unlikely(writeaccess && !pte_write(entry)))
-		goto out;
+		return 1;
 
 	if (writeaccess)
 		entry = pte_mkdirty(entry);
 	entry = pte_mkyoung(entry);
 
+	set_pte(pte, entry);
+
 #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP)
 	/*
-	 * ITLB is not affected by "ldtlb" instruction.
-	 * So, we need to flush the entry by ourselves.
+	 * SH-4 does not set MMUCR.RC to the corresponding TLB entry in
+	 * the case of an initial page write exception, so we need to
+	 * flush it in order to avoid potential TLB entry duplication.
 	 */
-	local_flush_tlb_one(get_asid(), address & PAGE_MASK);
+	if (writeaccess == 2)
+		local_flush_tlb_one(get_asid(), address & PAGE_MASK);
 #endif
 
-	set_pte(pte, entry);
 	update_mmu_cache(NULL, address, entry);
 
-	ret = 0;
-out:
-	return ret;
+	return 0;
 }
-- 
cgit v1.2.3


From 58c41d28259c246dbc11358d85d332dc20ccd57b Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 14 Aug 2009 12:14:19 -0700
Subject: x86, intel_txt: Factor out the code for S3 setup

S3 sleep requires special setup in tboot.  However, the data
structures needed to do such setup are only available if
CONFIG_ACPI_SLEEP is enabled.  Abstract them out as much as possible,
so we can have a single tboot_setup_sleep() which either is a proper
implementation or a stub which simply calls BUG().

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Shane Wang <shane.wang@intel.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
---
 arch/x86/kernel/tboot.c | 53 +++++++++++++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 1ab80120894..a183beffe39 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -34,6 +34,7 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/fixmap.h>
+#include <asm/proto.h>
 #include <asm/setup.h>
 #include <asm/tboot.h>
 #include <asm/e820.h>
@@ -164,25 +165,51 @@ void tboot_create_trampoline(void)
 	map_base = PFN_DOWN(tboot->tboot_base);
 	map_size = PFN_UP(tboot->tboot_size);
 	if (map_tboot_pages(map_base << PAGE_SHIFT, map_base, map_size))
-		panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n", map_base, map_size);
+		panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n",
+		      map_base, map_size);
 }
 
-static void set_mac_regions(void)
+#ifdef CONFIG_ACPI_SLEEP
+
+static void add_mac_region(phys_addr_t start, unsigned long size)
 {
-	tboot->num_mac_regions = 3;
+	struct tboot_mac_region *mr;
+	phys_addr_t end = start + size;
+
+	if (start && size) {
+		mr = &tboot->mac_regions[tboot->num_mac_regions++];
+		mr->start = round_down(start, PAGE_SIZE);
+		mr->size  = round_up(end, PAGE_SIZE) - mr->start;
+	}
+}
+
+static int tboot_setup_sleep(void)
+{
+	tboot->num_mac_regions = 0;
+
 	/* S3 resume code */
-	tboot->mac_regions[0].start = PFN_PHYS(PFN_DOWN(acpi_wakeup_address));
-	tboot->mac_regions[0].size = PFN_UP(WAKEUP_SIZE) << PAGE_SHIFT;
+	add_mac_region(acpi_wakeup_address, WAKEUP_SIZE);
 	/* AP trampoline code */
-	tboot->mac_regions[1].start =
-			PFN_PHYS(PFN_DOWN(virt_to_phys(trampoline_base)));
-	tboot->mac_regions[1].size = PFN_UP(TRAMPOLINE_SIZE) << PAGE_SHIFT;
+	add_mac_region(virt_to_phys(trampoline_base), TRAMPOLINE_SIZE);
 	/* kernel code + data + bss */
-	tboot->mac_regions[2].start = PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
-	tboot->mac_regions[2].size = PFN_PHYS(PFN_UP(virt_to_phys(&_end))) -
-				     PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
+	add_mac_region(virt_to_phys(_text), _end - _text);
+
+	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
+
+	return 0;
 }
 
+#else /* no CONFIG_ACPI_SLEEP */
+
+static int tboot_setup_sleep(void)
+{
+	/* S3 shutdown requested, but S3 not supported by the kernel... */
+	BUG();
+	return -1;
+}
+
+#endif
+
 void tboot_shutdown(u32 shutdown_type)
 {
 	void (*shutdown)(void);
@@ -200,7 +227,8 @@ void tboot_shutdown(u32 shutdown_type)
 
 	/* if this is S3 then set regions to MAC */
 	if (shutdown_type == TB_SHUTDOWN_S3)
-		set_mac_regions();
+		if (tboot_setup_sleep())
+			return;
 
 	tboot->shutdown_type = shutdown_type;
 
@@ -253,7 +281,6 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
 	tboot->acpi_sinfo.pm1b_cnt_val = pm1b_control;
 	/* we always use the 32b wakeup vector */
 	tboot->acpi_sinfo.vector_width = 32;
-	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
 
 	if (sleep_state >= ACPI_S_STATE_COUNT ||
 	    acpi_shutdown_map[sleep_state] == -1) {
-- 
cgit v1.2.3


From 7a90e00dda0bae66b5232d5a37155f13a0581369 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 07:41:45 +0900
Subject: sh: Make sure rte delay slots are nopped out on all parts.

Future SH parts do not support any instruction but a nop in the rte delay
slot, so make the change for all offending parts. SH-5 is excluded from
this, and already has its own set of restrictions with regards to rte
delay slot handling.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh2/entry.S  | 3 ++-
 arch/sh/kernel/cpu/sh2a/entry.S | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index becc54c4569..c8a4331d9b8 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -227,8 +227,9 @@ ENTRY(sh_bios_handler)
 	mov.l	@r15+, r14
 	add	#8,r15
 	lds.l	@r15+, pr
+	mov.l	@r15+,r15
 	rte
-	 mov.l	@r15+,r15
+	 nop
 	.align	2
 1:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
index ab3903eeda5..222742ddc0d 100644
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -176,8 +176,9 @@ ENTRY(sh_bios_handler)
 	movml.l	@r15+,r14
 	add	#8,r15
 	lds.l	@r15+, pr
+	mov.l	@r15+,r15
 	rte
-	 mov.l	@r15+,r15
+	 nop
 	.align	2
 1:	.long	gdb_vbr_vector
 #endif /* CONFIG_SH_STANDARD_BIOS */
-- 
cgit v1.2.3


From 7dd6662a92fe9a15ad565045aa60367995cc533d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 07:43:21 +0900
Subject: sh: delay slot future proofing via EXPMASK on SH-4A parts.

This implements EXPMASK initialization code for SH-4A parts, where it is
possible to disable compat features that will go away in newer cores.
Presently this includes disabling support for non-nop instructions in the
rte delay slot, as well as a sleep instruction being placed in a delay
slot (neither of which the kernel does any longer). As a result of this,
any future offenders will have illegal slot exceptions generated for
them.

Associative writes for the memory-mapped cache array are still left
enabled, until such a point that special cache operations for SH-4A are
provided to move off of the current (and rather dated) SH-4 versions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/init.c | 34 +++++++++++++++++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index ad85421099c..d40b9db5be0 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -3,7 +3,7 @@
  *
  * CPU init code
  *
- * Copyright (C) 2002 - 2007  Paul Mundt
+ * Copyright (C) 2002 - 2009  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -62,6 +62,37 @@ static void __init speculative_execution_init(void)
 #define speculative_execution_init()	do { } while (0)
 #endif
 
+#ifdef CONFIG_CPU_SH4A
+#define EXPMASK			0xff2f0004
+#define EXPMASK_RTEDS		(1 << 0)
+#define EXPMASK_BRDSSLP		(1 << 1)
+#define EXPMASK_MMCAW		(1 << 4)
+
+static void __init expmask_init(void)
+{
+	unsigned long expmask = __raw_readl(EXPMASK);
+
+	/*
+	 * Future proofing.
+	 *
+	 * Disable support for slottable sleep instruction
+	 * and non-nop instructions in the rte delay slot.
+	 */
+	expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP);
+
+	/*
+	 * Enable associative writes to the memory-mapped cache array
+	 * until the cache flush ops have been rewritten.
+	 */
+	expmask |= EXPMASK_MMCAW;
+
+	__raw_writel(expmask, EXPMASK);
+	ctrl_barrier();
+}
+#else
+#define expmask_init()	do { } while (0)
+#endif
+
 /* 2nd-level cache init */
 void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
 {
@@ -321,4 +352,5 @@ asmlinkage void __init sh_cpu_init(void)
 #endif
 
 	speculative_execution_init();
+	expmask_init();
 }
-- 
cgit v1.2.3


From 180aa6e6aa11922dcd4c13df1967d62bb2ede76c Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 15 Aug 2009 00:04:00 +0100
Subject: sh: Set the cfa_offset to 0 if we see a DW_CFA_def_cfa_register op

The way that the CFA is calculated can change as we progress through a
function. If we see a DW_CFA_def_cfa_register op we need to reset the
frame's cfa_offset value which may have been previously setup.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index db021361b16..c6c5764a8ab 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -449,6 +449,7 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			count = dwarf_read_uleb128(current_insn,
 						   &frame->cfa_register);
 			current_insn += count;
+			frame->cfa_offset = 0;
 			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
 			break;
 		case DW_CFA_def_cfa_offset:
-- 
cgit v1.2.3


From 8edcfcbbd131a3580db666ed1034c24d56eb6f5d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 09:03:59 +0900
Subject: sh: Bail from kmap_coherent_init() if we have no dcache aliases.

This kills off the ifdef from kmap_coherent_init() and just bails if
there are no cache aliases. This permits the kmap coherent code to be
used on other CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/pg-mmu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
index 027c4d83fb8..7a6ef34bd49 100644
--- a/arch/sh/mm/pg-mmu.c
+++ b/arch/sh/mm/pg-mmu.c
@@ -22,13 +22,14 @@ static pte_t *kmap_coherent_pte;
 
 void __init kmap_coherent_init(void)
 {
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
 	unsigned long vaddr;
 
+	if (!boot_cpu_data.dcache.n_aliases)
+		return;
+
 	/* cache the first coherent kmap pte */
 	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
 	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
-#endif
 }
 
 static void *kmap_coherent(struct page *page, unsigned long addr)
-- 
cgit v1.2.3


From 2739742c24f1a55365e71f0722bfdce8994e9c4e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 09:19:19 +0900
Subject: sh: Provide the kmap_coherent() interface generically.

This plugs in kmap_coherent() for the non-SH4 cases to permit the
pg-mmu.c bits to be used generically across all CPUs. SH-5 is still in
the TODO state, but will move over to fixmap and the generic interface
gradually.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h |  4 +++
 arch/sh/include/asm/pgtable.h    |  6 ----
 arch/sh/mm/Makefile_32           |  2 +-
 arch/sh/mm/cache-sh5.c           | 15 ++++++++++
 arch/sh/mm/kmap.c                | 64 ++++++++++++++++++++++++++++++++++++++++
 arch/sh/mm/pg-mmu.c              | 48 ------------------------------
 arch/sh/mm/tlb-nommu.c           | 15 ++++++++++
 7 files changed, 99 insertions(+), 55 deletions(-)
 create mode 100644 arch/sh/mm/kmap.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 5dffbd126e4..0e87e87cc01 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -74,5 +74,9 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
+void kmap_coherent_init(void);
+void *kmap_coherent(struct page *page, unsigned long addr);
+void kunmap_coherent(void);
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index 3cd7127af95..4f3efa7d5a6 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -158,12 +158,6 @@ extern void paging_init(void);
 extern void page_table_range_init(unsigned long start, unsigned long end,
 				  pgd_t *pgd);
 
-#if defined(CONFIG_MMU) && !defined(CONFIG_CPU_SH5)
-extern void kmap_coherent_init(void);
-#else
-#define kmap_coherent_init()	do { } while (0)
-#endif
-
 /* arch/sh/mm/mmap.c */
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index 17b02522214..30771b137f4 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -15,7 +15,7 @@ endif
 obj-y			+= $(cache-y)
 
 mmu-y			:= tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o pg-mmu.o
+mmu-$(CONFIG_MMU)	:= fault_32.o kmap.o tlbflush_32.o ioremap_32.o pg-mmu.o
 
 obj-y			+= $(mmu-y)
 obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 698113fce81..28f3c8fb1b9 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -29,6 +29,21 @@ void __init p3_cache_init(void)
 	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
 }
 
+void __init kmap_coherent_init(void)
+{
+	/* XXX ... */
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	/* XXX ... */
+	return NULL;
+}
+
+void kunmap_coherent(void)
+{
+}
+
 #ifdef CONFIG_DCACHE_DISABLED
 #define sh64_dcache_purge_all()					do { } while (0)
 #define sh64_dcache_purge_coloured_phy_page(paddr, eaddr)	do { } while (0)
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
new file mode 100644
index 00000000000..3eecf0d42f1
--- /dev/null
+++ b/arch/sh/mm/kmap.c
@@ -0,0 +1,64 @@
+/*
+ * arch/sh/mm/kmap.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+#define kmap_get_fixmap_pte(vaddr)                                     \
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
+static pte_t *kmap_coherent_pte;
+
+void __init kmap_coherent_init(void)
+{
+	unsigned long vaddr;
+
+	if (!boot_cpu_data.dcache.n_aliases)
+		return;
+
+	/* cache the first coherent kmap pte */
+	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
+	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr, flags;
+	pte_t pte;
+
+	BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+
+	inc_preempt_count();
+
+	idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
+	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
+	pte = mk_pte(page, PAGE_KERNEL);
+
+	local_irq_save(flags);
+	flush_tlb_one(get_asid(), vaddr);
+	local_irq_restore(flags);
+
+	update_mmu_cache(NULL, vaddr, pte);
+
+	set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte);
+
+	return (void *)vaddr;
+}
+
+void kunmap_coherent(void)
+{
+	dec_preempt_count();
+	preempt_check_resched();
+}
diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
index 7a6ef34bd49..f51d0a4eb3b 100644
--- a/arch/sh/mm/pg-mmu.c
+++ b/arch/sh/mm/pg-mmu.c
@@ -15,54 +15,6 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-#define kmap_get_fixmap_pte(vaddr)                                     \
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
-static pte_t *kmap_coherent_pte;
-
-void __init kmap_coherent_init(void)
-{
-	unsigned long vaddr;
-
-	if (!boot_cpu_data.dcache.n_aliases)
-		return;
-
-	/* cache the first coherent kmap pte */
-	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
-	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
-}
-
-static void *kmap_coherent(struct page *page, unsigned long addr)
-{
-	enum fixed_addresses idx;
-	unsigned long vaddr, flags;
-	pte_t pte;
-
-	BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
-
-	inc_preempt_count();
-
-	idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
-	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
-	pte = mk_pte(page, PAGE_KERNEL);
-
-	local_irq_save(flags);
-	flush_tlb_one(get_asid(), vaddr);
-	local_irq_restore(flags);
-
-	update_mmu_cache(NULL, vaddr, pte);
-
-	set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte);
-
-	return (void *)vaddr;
-}
-
-static inline void kunmap_coherent(void)
-{
-	dec_preempt_count();
-	preempt_check_resched();
-}
-
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long vaddr, void *dst, const void *src,
 		       unsigned long len)
diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c
index 0ef5429943d..c49e9d24c2e 100644
--- a/arch/sh/mm/tlb-nommu.c
+++ b/arch/sh/mm/tlb-nommu.c
@@ -55,6 +55,21 @@ void __update_cache(struct vm_area_struct *vma,
 {
 }
 
+void __init kmap_coherent_init(void)
+{
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	BUG();
+	return NULL;
+}
+
+void kunmap_coherent(void)
+{
+	BUG();
+}
+
 void __init page_table_range_init(unsigned long start, unsigned long end,
 				  pgd_t *pgd_base)
 {
-- 
cgit v1.2.3


From cbbe2f68f678a90bebeb30b8a7fcd8aed0614879 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 09:30:39 +0900
Subject: sh: rename pg-mmu.c -> cache.c, enable generically.

This builds in the newly created cache.c (renamed from pg-mmu.c) for both
MMU and NOMMU configurations. The kmap_coherent() stubs and alias
information recorded by each CPU family takes care of doing the right
thing while enabling the code to be commonly shared.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h |   2 -
 arch/sh/mm/Makefile_32           |  16 ++---
 arch/sh/mm/cache.c               | 129 +++++++++++++++++++++++++++++++++++++++
 arch/sh/mm/pg-mmu.c              | 129 ---------------------------------------
 4 files changed, 137 insertions(+), 139 deletions(-)
 create mode 100644 arch/sh/mm/cache.c
 delete mode 100644 arch/sh/mm/pg-mmu.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 0e87e87cc01..4bf621e4146 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -45,7 +45,6 @@ extern void __flush_purge_region(void *start, int size);
 extern void __flush_invalidate_region(void *start, int size);
 #endif
 
-#ifdef CONFIG_MMU
 #define ARCH_HAS_FLUSH_ANON_PAGE
 extern void __flush_anon_page(struct page *page, unsigned long);
 
@@ -55,7 +54,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 	if (boot_cpu_data.dcache.n_aliases && PageAnon(page))
 		__flush_anon_page(page, vmaddr);
 }
-#endif
 
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
 static inline void flush_kernel_dcache_page(struct page *page)
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index 30771b137f4..affcc9a15ce 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -2,20 +2,20 @@
 # Makefile for the Linux SuperH-specific parts of the memory manager.
 #
 
-obj-y			:= init.o extable_32.o consistent.o mmap.o
+obj-y			:= cache.o init.o extable_32.o consistent.o mmap.o
 
 ifndef CONFIG_CACHE_OFF
-cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
-cache-$(CONFIG_CPU_SH2A)	:= cache-sh2a.o
-cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
-cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
-cache-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+cacheops-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
+cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
+cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 endif
 
-obj-y			+= $(cache-y)
+obj-y			+= $(cacheops-y)
 
 mmu-y			:= tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU)	:= fault_32.o kmap.o tlbflush_32.o ioremap_32.o pg-mmu.o
+mmu-$(CONFIG_MMU)	:= fault_32.o kmap.o tlbflush_32.o ioremap_32.o
 
 obj-y			+= $(mmu-y)
 obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
new file mode 100644
index 00000000000..f51d0a4eb3b
--- /dev/null
+++ b/arch/sh/mm/cache.c
@@ -0,0 +1,129 @@
+/*
+ * arch/sh/mm/pg-mmu.c
+ *
+ * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/fs.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long vaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	    !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(vto, src, len);
+		kunmap_coherent();
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			set_bit(PG_dcache_dirty, &page->flags);
+	}
+
+	if (vma->vm_flags & VM_EXEC)
+		flush_cache_page(vma, vaddr, page_to_pfn(page));
+}
+
+void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+			 unsigned long vaddr, void *dst, const void *src,
+			 unsigned long len)
+{
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	    !test_bit(PG_dcache_dirty, &page->flags)) {
+		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+		memcpy(dst, vfrom, len);
+		kunmap_coherent();
+	} else {
+		memcpy(dst, src, len);
+		if (boot_cpu_data.dcache.n_aliases)
+			set_bit(PG_dcache_dirty, &page->flags);
+	}
+}
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr, struct vm_area_struct *vma)
+{
+	void *vfrom, *vto;
+
+	vto = kmap_atomic(to, KM_USER1);
+
+	if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
+	    !test_bit(PG_dcache_dirty, &from->flags)) {
+		vfrom = kmap_coherent(from, vaddr);
+		copy_page(vto, vfrom);
+		kunmap_coherent();
+	} else {
+		vfrom = kmap_atomic(from, KM_USER0);
+		copy_page(vto, vfrom);
+		kunmap_atomic(vfrom, KM_USER0);
+	}
+
+	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+		__flush_wback_region(vto, PAGE_SIZE);
+
+	kunmap_atomic(vto, KM_USER1);
+	/* Make sure this page is cleared on other CPU's too before using it */
+	smp_wmb();
+}
+EXPORT_SYMBOL(copy_user_highpage);
+
+void clear_user_highpage(struct page *page, unsigned long vaddr)
+{
+	void *kaddr = kmap_atomic(page, KM_USER0);
+
+	clear_page(kaddr);
+
+	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
+		__flush_wback_region(kaddr, PAGE_SIZE);
+
+	kunmap_atomic(kaddr, KM_USER0);
+}
+EXPORT_SYMBOL(clear_user_highpage);
+
+void __update_cache(struct vm_area_struct *vma,
+		    unsigned long address, pte_t pte)
+{
+	struct page *page;
+	unsigned long pfn = pte_pfn(pte);
+
+	if (!boot_cpu_data.dcache.n_aliases)
+		return;
+
+	page = pfn_to_page(pfn);
+	if (pfn_valid(pfn) && page_mapping(page)) {
+		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+		if (dirty) {
+			unsigned long addr = (unsigned long)page_address(page);
+
+			if (pages_do_alias(addr, address & PAGE_MASK))
+				__flush_wback_region((void *)addr, PAGE_SIZE);
+		}
+	}
+}
+
+void __flush_anon_page(struct page *page, unsigned long vmaddr)
+{
+	unsigned long addr = (unsigned long) page_address(page);
+
+	if (pages_do_alias(addr, vmaddr)) {
+		if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+		    !test_bit(PG_dcache_dirty, &page->flags)) {
+			void *kaddr;
+
+			kaddr = kmap_coherent(page, vmaddr);
+			__flush_wback_region((void *)kaddr, PAGE_SIZE);
+			kunmap_coherent();
+		} else
+			__flush_wback_region((void *)addr, PAGE_SIZE);
+	}
+}
diff --git a/arch/sh/mm/pg-mmu.c b/arch/sh/mm/pg-mmu.c
deleted file mode 100644
index f51d0a4eb3b..00000000000
--- a/arch/sh/mm/pg-mmu.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * arch/sh/mm/pg-mmu.c
- *
- * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- * Copyright (C) 2002 - 2009  Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/fs.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long vaddr, void *dst, const void *src,
-		       unsigned long len)
-{
-	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-	    !test_bit(PG_dcache_dirty, &page->flags)) {
-		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-		memcpy(vto, src, len);
-		kunmap_coherent();
-	} else {
-		memcpy(dst, src, len);
-		if (boot_cpu_data.dcache.n_aliases)
-			set_bit(PG_dcache_dirty, &page->flags);
-	}
-
-	if (vma->vm_flags & VM_EXEC)
-		flush_cache_page(vma, vaddr, page_to_pfn(page));
-}
-
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
-			 unsigned long vaddr, void *dst, const void *src,
-			 unsigned long len)
-{
-	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-	    !test_bit(PG_dcache_dirty, &page->flags)) {
-		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
-		memcpy(dst, vfrom, len);
-		kunmap_coherent();
-	} else {
-		memcpy(dst, src, len);
-		if (boot_cpu_data.dcache.n_aliases)
-			set_bit(PG_dcache_dirty, &page->flags);
-	}
-}
-
-void copy_user_highpage(struct page *to, struct page *from,
-			unsigned long vaddr, struct vm_area_struct *vma)
-{
-	void *vfrom, *vto;
-
-	vto = kmap_atomic(to, KM_USER1);
-
-	if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
-	    !test_bit(PG_dcache_dirty, &from->flags)) {
-		vfrom = kmap_coherent(from, vaddr);
-		copy_page(vto, vfrom);
-		kunmap_coherent();
-	} else {
-		vfrom = kmap_atomic(from, KM_USER0);
-		copy_page(vto, vfrom);
-		kunmap_atomic(vfrom, KM_USER0);
-	}
-
-	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-		__flush_wback_region(vto, PAGE_SIZE);
-
-	kunmap_atomic(vto, KM_USER1);
-	/* Make sure this page is cleared on other CPU's too before using it */
-	smp_wmb();
-}
-EXPORT_SYMBOL(copy_user_highpage);
-
-void clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	void *kaddr = kmap_atomic(page, KM_USER0);
-
-	clear_page(kaddr);
-
-	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
-		__flush_wback_region(kaddr, PAGE_SIZE);
-
-	kunmap_atomic(kaddr, KM_USER0);
-}
-EXPORT_SYMBOL(clear_user_highpage);
-
-void __update_cache(struct vm_area_struct *vma,
-		    unsigned long address, pte_t pte)
-{
-	struct page *page;
-	unsigned long pfn = pte_pfn(pte);
-
-	if (!boot_cpu_data.dcache.n_aliases)
-		return;
-
-	page = pfn_to_page(pfn);
-	if (pfn_valid(pfn) && page_mapping(page)) {
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-		if (dirty) {
-			unsigned long addr = (unsigned long)page_address(page);
-
-			if (pages_do_alias(addr, address & PAGE_MASK))
-				__flush_wback_region((void *)addr, PAGE_SIZE);
-		}
-	}
-}
-
-void __flush_anon_page(struct page *page, unsigned long vmaddr)
-{
-	unsigned long addr = (unsigned long) page_address(page);
-
-	if (pages_do_alias(addr, vmaddr)) {
-		if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-		    !test_bit(PG_dcache_dirty, &page->flags)) {
-			void *kaddr;
-
-			kaddr = kmap_coherent(page, vmaddr);
-			__flush_wback_region((void *)kaddr, PAGE_SIZE);
-			kunmap_coherent();
-		} else
-			__flush_wback_region((void *)addr, PAGE_SIZE);
-	}
-}
-- 
cgit v1.2.3


From dde5e3ffb770ef2854bbc32c51a365e932919e19 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 09:49:32 +0900
Subject: sh: rework nommu for generic cache.c use.

This does a bit of reorganizing for allowing nommu to use the new
and generic cache.c, no functional changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h         | 2 ++
 arch/sh/include/asm/page.h               | 7 +------
 arch/sh/include/cpu-sh3/cpu/cacheflush.h | 2 --
 arch/sh/include/cpu-sh4/cpu/cacheflush.h | 2 --
 arch/sh/kernel/cpu/init.c                | 2 --
 arch/sh/mm/mmap.c                        | 2 +-
 arch/sh/mm/tlb-nommu.c                   | 5 -----
 7 files changed, 4 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 4bf621e4146..9ec13fb909d 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -76,5 +76,7 @@ void kmap_coherent_init(void);
 void *kmap_coherent(struct page *page, unsigned long addr);
 void kunmap_coherent(void);
 
+#define PG_dcache_dirty	PG_arch_1
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 847eeabb908..a316eeb50b3 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -68,18 +68,13 @@ extern void clear_user_page(void *to, unsigned long address, struct page *page);
 extern void copy_user_page(void *to, void *from, unsigned long address,
 			   struct page *page);
 
-#elif defined(CONFIG_MMU)
+#else
 extern void copy_user_highpage(struct page *to, struct page *from,
 			       unsigned long vaddr, struct vm_area_struct *vma);
 #define __HAVE_ARCH_COPY_USER_HIGHPAGE
 extern void clear_user_highpage(struct page *page, unsigned long vaddr);
 #define clear_user_highpage	clear_user_highpage
 
-#else
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
 #endif
 
 /*
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
index 6485ad5649a..3b5f3df4e1c 100644
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -15,8 +15,6 @@
  * SH4. Unlike the SH4 this is a unified cache so we need to do some work
  * in mmap when 'exec'ing a new binary
  */
-#define PG_dcache_dirty	PG_arch_1
-
 void flush_cache_all(void);
 void flush_cache_mm(struct mm_struct *mm);
 #define flush_cache_dup_mm(mm) flush_cache_mm(mm)
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index 3564f172219..76764f0fb88 100644
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -38,6 +38,4 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 /* Initialization of P3 area for copy_user_page */
 void p3_cache_init(void);
 
-#define PG_dcache_dirty	PG_arch_1
-
 #endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index ad85421099c..c832fa4cf8e 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -268,11 +268,9 @@ asmlinkage void __init sh_cpu_init(void)
 	cache_init();
 
 	if (raw_smp_processor_id() == 0) {
-#ifdef CONFIG_MMU
 		shm_align_mask = max_t(unsigned long,
 				       current_cpu_data.dcache.way_size - 1,
 				       PAGE_SIZE - 1);
-#endif
 
 		/* Boot CPU sets the cache shape */
 		detect_cache_shape();
diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c
index 1b5fdfb4e0c..d2984fa42d3 100644
--- a/arch/sh/mm/mmap.c
+++ b/arch/sh/mm/mmap.c
@@ -14,10 +14,10 @@
 #include <asm/page.h>
 #include <asm/processor.h>
 
-#ifdef CONFIG_MMU
 unsigned long shm_align_mask = PAGE_SIZE - 1;	/* Sane caches */
 EXPORT_SYMBOL(shm_align_mask);
 
+#ifdef CONFIG_MMU
 /*
  * To avoid cache aliases, we map the shared page with same color.
  */
diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c
index c49e9d24c2e..0710ebb99b9 100644
--- a/arch/sh/mm/tlb-nommu.c
+++ b/arch/sh/mm/tlb-nommu.c
@@ -50,11 +50,6 @@ void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
 }
 
-void __update_cache(struct vm_area_struct *vma,
-		    unsigned long address, pte_t pte)
-{
-}
-
 void __init kmap_coherent_init(void)
 {
 }
-- 
cgit v1.2.3


From aae4d1428c03b03f9fe6204a83e35822fe9cc591 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 09:57:57 +0900
Subject: sh: consolidate nommu stubs in arch/sh/mm/nommu.c.

These were previous littered around tlb-nommu.c and pg-nommu.c, though at
this point there are more stubs than are strictly TLB or page op related,
so just consolidate them in a single nommu.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Makefile_32 |  2 +-
 arch/sh/mm/Makefile_64 |  2 +-
 arch/sh/mm/nommu.c     | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/sh/mm/pg-nommu.c  | 33 -----------------
 arch/sh/mm/tlb-nommu.c | 75 ---------------------------------------
 5 files changed, 98 insertions(+), 110 deletions(-)
 create mode 100644 arch/sh/mm/nommu.c
 delete mode 100644 arch/sh/mm/pg-nommu.c
 delete mode 100644 arch/sh/mm/tlb-nommu.c

(limited to 'arch')

diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index affcc9a15ce..ff3b07bd772 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -14,7 +14,7 @@ endif
 
 obj-y			+= $(cacheops-y)
 
-mmu-y			:= tlb-nommu.o pg-nommu.o
+mmu-y			:= nommu.o
 mmu-$(CONFIG_MMU)	:= fault_32.o kmap.o tlbflush_32.o ioremap_32.o
 
 obj-y			+= $(mmu-y)
diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64
index 66c39106d0a..4d5ed245ef4 100644
--- a/arch/sh/mm/Makefile_64
+++ b/arch/sh/mm/Makefile_64
@@ -4,7 +4,7 @@
 
 obj-y			:= init.o consistent.o mmap.o
 
-mmu-y			:= tlb-nommu.o pg-nommu.o extable_32.o
+mmu-y			:= nommu.o extable_32.o
 mmu-$(CONFIG_MMU)	:= fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
 			   extable_64.o
 
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
new file mode 100644
index 00000000000..51b54037216
--- /dev/null
+++ b/arch/sh/mm/nommu.c
@@ -0,0 +1,96 @@
+/*
+ * arch/sh/mm/nommu.c
+ *
+ * Various helper routines and stubs for MMUless SH.
+ *
+ * Copyright (C) 2002 - 2009 Paul Mundt
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+/*
+ * Nothing too terribly exciting here ..
+ */
+void copy_page(void *to, void *from)
+{
+	memcpy(to, from, PAGE_SIZE);
+}
+
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
+{
+	memcpy(to, from, n);
+	return 0;
+}
+
+__kernel_size_t __clear_user(void *to, __kernel_size_t n)
+{
+	memset(to, 0, n);
+	return 0;
+}
+
+void local_flush_tlb_all(void)
+{
+	BUG();
+}
+
+void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG();
+}
+
+void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end)
+{
+	BUG();
+}
+
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
+{
+	BUG();
+}
+
+void local_flush_tlb_one(unsigned long asid, unsigned long page)
+{
+	BUG();
+}
+
+void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	BUG();
+}
+
+void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+}
+
+void __init kmap_coherent_init(void)
+{
+}
+
+void *kmap_coherent(struct page *page, unsigned long addr)
+{
+	BUG();
+	return NULL;
+}
+
+void kunmap_coherent(void)
+{
+	BUG();
+}
+
+void __init page_table_range_init(unsigned long start, unsigned long end,
+				  pgd_t *pgd_base)
+{
+}
+
+void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
+{
+}
diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c
deleted file mode 100644
index 7e33b486b7e..00000000000
--- a/arch/sh/mm/pg-nommu.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/sh/mm/pg-nommu.c
- *
- * copy_page()/__copy_user()/__clear_user() implementations for MMUless SH.
- *
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-
-void copy_page(void *to, void *from)
-{
-	memcpy(to, from, PAGE_SIZE);
-}
-
-__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n)
-{
-	memcpy(to, from, n);
-	return 0;
-}
-
-__kernel_size_t __clear_user(void *to, __kernel_size_t n)
-{
-	memset(to, 0, n);
-	return 0;
-}
diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c
deleted file mode 100644
index 0710ebb99b9..00000000000
--- a/arch/sh/mm/tlb-nommu.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/sh/mm/tlb-nommu.c
- *
- * TLB Operations for MMUless SH.
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * Released under the terms of the GNU GPL v2.0.
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-/*
- * Nothing too terribly exciting here ..
- */
-void local_flush_tlb_all(void)
-{
-	BUG();
-}
-
-void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	BUG();
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-			    unsigned long end)
-{
-	BUG();
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
-{
-	BUG();
-}
-
-void local_flush_tlb_one(unsigned long asid, unsigned long page)
-{
-	BUG();
-}
-
-void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	BUG();
-}
-
-void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
-}
-
-void __init kmap_coherent_init(void)
-{
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
-	BUG();
-	return NULL;
-}
-
-void kunmap_coherent(void)
-{
-	BUG();
-}
-
-void __init page_table_range_init(unsigned long start, unsigned long end,
-				  pgd_t *pgd_base)
-{
-}
-
-void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot)
-{
-}
-- 
cgit v1.2.3


From e82da214d2fe3dc2610df966100c4f36bc0fad91 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 10:48:13 +0900
Subject: sh: Track the CPU family in sh_cpuinfo.

This adds a family member to struct sh_cpuinfo, which allows us to fall
back more on the probe routines to work out what sort of subtype we are
running on. This will be used by the CPU cache initialization code in
order to first do family-level initialization, followed by subtype-level
optimizations.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/bugs.h      | 24 ++++++++++++------------
 arch/sh/include/asm/processor.h | 13 ++++++++++++-
 arch/sh/kernel/cpu/sh2/probe.c  |  1 +
 arch/sh/kernel/cpu/sh2a/probe.c |  2 ++
 arch/sh/kernel/cpu/sh3/probe.c  |  2 ++
 arch/sh/kernel/cpu/sh4/probe.c  |  9 +++++++--
 arch/sh/kernel/cpu/sh5/probe.c  |  2 ++
 arch/sh/kernel/setup.c          |  1 +
 8 files changed, 39 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
index 4924ff6f543..46260fcbdf4 100644
--- a/arch/sh/include/asm/bugs.h
+++ b/arch/sh/include/asm/bugs.h
@@ -21,25 +21,25 @@ static void __init check_bugs(void)
 
 	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
 
-	switch (current_cpu_data.type) {
-	case CPU_SH7619:
+	switch (current_cpu_data.family) {
+	case CPU_FAMILY_SH2:
 		*p++ = '2';
 		break;
-	case CPU_SH7201 ... CPU_MXG:
+	case CPU_FAMILY_SH2A:
 		*p++ = '2';
 		*p++ = 'a';
 		break;
-	case CPU_SH7705 ... CPU_SH7729:
+	case CPU_FAMILY_SH3:
 		*p++ = '3';
 		break;
-	case CPU_SH7750 ... CPU_SH4_501:
+	case CPU_FAMILY_SH4:
 		*p++ = '4';
 		break;
-	case CPU_SH7763 ... CPU_SHX3:
+	case CPU_FAMILY_SH4A:
 		*p++ = '4';
 		*p++ = 'a';
 		break;
-	case CPU_SH7343 ... CPU_SH7366:
+	case CPU_FAMILY_SH4AL_DSP:
 		*p++ = '4';
 		*p++ = 'a';
 		*p++ = 'l';
@@ -48,15 +48,15 @@ static void __init check_bugs(void)
 		*p++ = 's';
 		*p++ = 'p';
 		break;
-	case CPU_SH5_101 ... CPU_SH5_103:
+	case CPU_FAMILY_SH5:
 		*p++ = '6';
 		*p++ = '4';
 		break;
-	case CPU_SH_NONE:
+	case CPU_FAMILY_UNKNOWN:
 		/*
-		 * Specifically use CPU_SH_NONE rather than default:,
-		 * so we're able to have the compiler whine about
-		 * unhandled enumerations.
+		 * Specifically use CPU_FAMILY_UNKNOWN rather than
+		 * default:, so we're able to have the compiler whine
+		 * about unhandled enumerations.
 		 */
 		break;
 	}
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index ff7daaf9a62..db1a4f3a755 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -44,6 +44,17 @@ enum cpu_type {
 	CPU_SH_NONE
 };
 
+enum cpu_family {
+	CPU_FAMILY_SH2,
+	CPU_FAMILY_SH2A,
+	CPU_FAMILY_SH3,
+	CPU_FAMILY_SH4,
+	CPU_FAMILY_SH4A,
+	CPU_FAMILY_SH4AL_DSP,
+	CPU_FAMILY_SH5,
+	CPU_FAMILY_UNKNOWN,
+};
+
 /*
  * TLB information structure
  *
@@ -61,7 +72,7 @@ struct tlb_info {
 };
 
 struct sh_cpuinfo {
-	unsigned int type;
+	unsigned int type, family;
 	int cut_major, cut_minor;
 	unsigned long loops_per_jiffy;
 	unsigned long asid_cache;
diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c
index 5916d9096b9..1db6d888388 100644
--- a/arch/sh/kernel/cpu/sh2/probe.c
+++ b/arch/sh/kernel/cpu/sh2/probe.c
@@ -29,6 +29,7 @@ int __init detect_cpu_and_cache_system(void)
 	 */
 	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
 	boot_cpu_data.icache = boot_cpu_data.dcache;
+	boot_cpu_data.family = CPU_FAMILY_SH2;
 
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
index e098e2f6aa0..6825d650716 100644
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ b/arch/sh/kernel/cpu/sh2a/probe.c
@@ -15,6 +15,8 @@
 
 int __init detect_cpu_and_cache_system(void)
 {
+	boot_cpu_data.family			= CPU_FAMILY_SH2A;
+
 	/* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
 	boot_cpu_data.flags			|= CPU_HAS_OP32;
 
diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c
index 10f2a760c5e..f9c7df64eb0 100644
--- a/arch/sh/kernel/cpu/sh3/probe.c
+++ b/arch/sh/kernel/cpu/sh3/probe.c
@@ -107,5 +107,7 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void)
 	boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
 	boot_cpu_data.icache = boot_cpu_data.dcache;
 
+	boot_cpu_data.family = CPU_FAMILY_SH3;
+
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 6c78d0a9c85..1148607c36b 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -57,8 +57,12 @@ int __init detect_cpu_and_cache_system(void)
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
 	if (((pvr >> 16) & 0xff) == 0x10) {
-		if ((cvr & 0x10000000) == 0)
+		boot_cpu_data.family = CPU_FAMILY_SH4A;
+
+		if ((cvr & 0x10000000) == 0) {
 			boot_cpu_data.flags |= CPU_HAS_DSP;
+			boot_cpu_data.family = CPU_FAMILY_SH4AL_DSP;
+		}
 
 		boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
 		boot_cpu_data.cut_major = pvr & 0x7f;
@@ -68,6 +72,7 @@ int __init detect_cpu_and_cache_system(void)
 	} else {
 		/* And some SH-4 defaults.. */
 		boot_cpu_data.flags |= CPU_HAS_PTEA;
+		boot_cpu_data.family = CPU_FAMILY_SH4;
 	}
 
 	/* FPU detection works for everyone */
@@ -174,7 +179,7 @@ int __init detect_cpu_and_cache_system(void)
 
 		break;
 	default:
-		boot_cpu_data.type = CPU_SH_NONE;
+		boot_cpu_data.type = boot_cpu_data.family = CPU_SH_NONE;
 		break;
 	}
 
diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c
index 92ad844b5c1..521d05b3f7b 100644
--- a/arch/sh/kernel/cpu/sh5/probe.c
+++ b/arch/sh/kernel/cpu/sh5/probe.c
@@ -34,6 +34,8 @@ int __init detect_cpu_and_cache_system(void)
 		/* CPU.VCR aliased at CIR address on SH5-101 */
 		boot_cpu_data.type = CPU_SH5_101;
 
+	boot_cpu_data.family = CPU_FAMILY_SH5;
+
 	/*
 	 * First, setup some sane values for the I-cache.
 	 */
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index ceb409bf774..dc403e42bca 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -49,6 +49,7 @@
 struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = {
 	[0] = {
 		.type			= CPU_SH_NONE,
+		.family			= CPU_FAMILY_UNKNOWN,
 		.loops_per_jiffy	= 10000000,
 	},
 };
-- 
cgit v1.2.3


From ecba1060583635ab55092072441ff903b5e9a659 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 11:05:42 +0900
Subject: sh: Centralize the CPU cache initialization routines.

This provides a central point for CPU cache initialization routines.
This replaces the antiquated p3_cache_init() method, which the vast
majority of CPUs never cared about.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h            |  3 ++-
 arch/sh/include/cpu-common/cpu/cacheflush.h |  2 --
 arch/sh/include/cpu-sh2a/cpu/cacheflush.h   |  1 -
 arch/sh/include/cpu-sh3/cpu/cacheflush.h    |  2 --
 arch/sh/include/cpu-sh4/cpu/cacheflush.h    |  3 ---
 arch/sh/include/cpu-sh5/cpu/cacheflush.h    |  1 -
 arch/sh/mm/cache-sh4.c                      |  2 +-
 arch/sh/mm/cache-sh5.c                      |  2 +-
 arch/sh/mm/cache.c                          | 11 +++++++++++
 arch/sh/mm/init.c                           |  2 +-
 10 files changed, 16 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 9ec13fb909d..e37654f7f54 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -12,7 +12,6 @@
  *
  * See arch/sh/kernel/cpu/init.c:cache_init().
  */
-#define p3_cache_init()				do { } while (0)
 #define flush_cache_all()			do { } while (0)
 #define flush_cache_mm(mm)			do { } while (0)
 #define flush_cache_dup_mm(mm)			do { } while (0)
@@ -78,5 +77,7 @@ void kunmap_coherent(void);
 
 #define PG_dcache_dirty	PG_arch_1
 
+void cpu_cache_init(void);
+
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
index c3db00b7360..0c38278509c 100644
--- a/arch/sh/include/cpu-common/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -39,6 +39,4 @@
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 
-#define p3_cache_init()				do { } while (0)
-
 #endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
index 3d3b9205d2a..b9eaa19325e 100644
--- a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
@@ -30,5 +30,4 @@ void flush_icache_range(unsigned long start, unsigned long end);
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 
-#define p3_cache_init()				do { } while (0)
 #endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
index 3b5f3df4e1c..cf656a09377 100644
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -32,8 +32,6 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page);
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 
-#define p3_cache_init()				do { } while (0)
-
 #else
 #include <cpu-common/cpu/cacheflush.h>
 #endif
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index 76764f0fb88..a28c542f517 100644
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -35,7 +35,4 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 
 #define flush_icache_page(vma,pg)		do { } while (0)
 
-/* Initialization of P3 area for copy_user_page */
-void p3_cache_init(void);
-
 #endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index 5a11f0b7e66..8350cc7ed1c 100644
--- a/arch/sh/include/cpu-sh5/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
@@ -25,7 +25,6 @@ extern void flush_icache_user_range(struct vm_area_struct *vma,
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
 #define flush_icache_page(vma, page)	do { } while (0)
-void p3_cache_init(void);
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 92f87a460a8..df2eb87f152 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -94,7 +94,7 @@ static void __init emit_cache_params(void)
 /*
  * SH-4 has virtually indexed and physically tagged cache.
  */
-void __init p3_cache_init(void)
+void __init sh4_cache_init(void)
 {
 	compute_alias(&boot_cpu_data.icache);
 	compute_alias(&boot_cpu_data.dcache);
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 28f3c8fb1b9..576cad04b11 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -23,7 +23,7 @@
 /* Wired TLB entry for the D-cache */
 static unsigned long long dtlb_cache_slot;
 
-void __init p3_cache_init(void)
+void __init cpu_cache_init(void)
 {
 	/* Reserve a slot for dcache colouring in the DTLB */
 	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index f51d0a4eb3b..659981ffae2 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -127,3 +127,14 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 			__flush_wback_region((void *)addr, PAGE_SIZE);
 	}
 }
+
+void __init cpu_cache_init(void)
+{
+	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
+	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
+	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
+		extern void __weak sh4_cache_init(void);
+
+		sh4_cache_init();
+	}
+}
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index fe532aeaa16..cf0e9c5146b 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -230,7 +230,7 @@ void __init mem_init(void)
 		datasize >> 10,
 		initsize >> 10);
 
-	p3_cache_init();
+	cpu_cache_init();
 
 	/* Initialize the vDSO */
 	vsyscall_init();
-- 
cgit v1.2.3


From 27d59ec1709817a90aa3ab7169f60994a89ad2f5 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 11:11:16 +0900
Subject: sh: Move alias computation to shared cache init.

This migrates the alias computation and printing of probed cache
parameters from the SH-4 code to the shared cpu_cache_init().

This permits other platforms with aliases to make use of the same
probe logic without having to roll their own, and also produces
consistent output regardless of platform.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 58 +++++---------------------------------------------
 arch/sh/mm/cache.c     | 46 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index df2eb87f152..4ac844b1432 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -44,61 +44,15 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys,
 static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
 	(void (*)(unsigned long, unsigned long))0xdeadbeef;
 
-static void compute_alias(struct cache_info *c)
-{
-	c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
-	c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
-}
-
-static void __init emit_cache_params(void)
-{
-	printk("PVR=%08x CVR=%08x PRR=%08x\n",
-		ctrl_inl(CCN_PVR),
-		ctrl_inl(CCN_CVR),
-		ctrl_inl(CCN_PRR));
-	printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
-		boot_cpu_data.icache.ways,
-		boot_cpu_data.icache.sets,
-		boot_cpu_data.icache.way_incr);
-	printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
-		boot_cpu_data.icache.entry_mask,
-		boot_cpu_data.icache.alias_mask,
-		boot_cpu_data.icache.n_aliases);
-	printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
-		boot_cpu_data.dcache.ways,
-		boot_cpu_data.dcache.sets,
-		boot_cpu_data.dcache.way_incr);
-	printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
-		boot_cpu_data.dcache.entry_mask,
-		boot_cpu_data.dcache.alias_mask,
-		boot_cpu_data.dcache.n_aliases);
-
-	/*
-	 * Emit Secondary Cache parameters if the CPU has a probed L2.
-	 */
-	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
-		printk("S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
-			boot_cpu_data.scache.ways,
-			boot_cpu_data.scache.sets,
-			boot_cpu_data.scache.way_incr);
-		printk("S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
-			boot_cpu_data.scache.entry_mask,
-			boot_cpu_data.scache.alias_mask,
-			boot_cpu_data.scache.n_aliases);
-	}
-
-	if (!__flush_dcache_segment_fn)
-		panic("unknown number of cache ways\n");
-}
-
 /*
  * SH-4 has virtually indexed and physically tagged cache.
  */
 void __init sh4_cache_init(void)
 {
-	compute_alias(&boot_cpu_data.icache);
-	compute_alias(&boot_cpu_data.dcache);
-	compute_alias(&boot_cpu_data.scache);
+	printk("PVR=%08x CVR=%08x PRR=%08x\n",
+		ctrl_inl(CCN_PVR),
+		ctrl_inl(CCN_CVR),
+		ctrl_inl(CCN_PRR));
 
 	switch (boot_cpu_data.dcache.ways) {
 	case 1:
@@ -111,11 +65,9 @@ void __init sh4_cache_init(void)
 		__flush_dcache_segment_fn = __flush_dcache_segment_4way;
 		break;
 	default:
-		__flush_dcache_segment_fn = NULL;
+		panic("unknown number of cache ways\n");
 		break;
 	}
-
-	emit_cache_params();
 }
 
 /*
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 659981ffae2..a31e5c46e7a 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -128,8 +128,52 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 	}
 }
 
+static void compute_alias(struct cache_info *c)
+{
+	c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
+	c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0;
+}
+
+static void __init emit_cache_params(void)
+{
+	printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		boot_cpu_data.icache.ways,
+		boot_cpu_data.icache.sets,
+		boot_cpu_data.icache.way_incr);
+	printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		boot_cpu_data.icache.entry_mask,
+		boot_cpu_data.icache.alias_mask,
+		boot_cpu_data.icache.n_aliases);
+	printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+		boot_cpu_data.dcache.ways,
+		boot_cpu_data.dcache.sets,
+		boot_cpu_data.dcache.way_incr);
+	printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+		boot_cpu_data.dcache.entry_mask,
+		boot_cpu_data.dcache.alias_mask,
+		boot_cpu_data.dcache.n_aliases);
+
+	/*
+	 * Emit Secondary Cache parameters if the CPU has a probed L2.
+	 */
+	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
+		printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
+			boot_cpu_data.scache.ways,
+			boot_cpu_data.scache.sets,
+			boot_cpu_data.scache.way_incr);
+		printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
+			boot_cpu_data.scache.entry_mask,
+			boot_cpu_data.scache.alias_mask,
+			boot_cpu_data.scache.n_aliases);
+	}
+}
+
 void __init cpu_cache_init(void)
 {
+	compute_alias(&boot_cpu_data.icache);
+	compute_alias(&boot_cpu_data.dcache);
+	compute_alias(&boot_cpu_data.scache);
+
 	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
@@ -137,4 +181,6 @@ void __init cpu_cache_init(void)
 
 		sh4_cache_init();
 	}
+
+	emit_cache_params();
 }
-- 
cgit v1.2.3


From 0b445dcaf3adda5bec5cc494925bc689fcc59a0e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 11:22:50 +0900
Subject: sh: Don't export flush_dcache_all().

flush_dcache_all() is used internally by the SH-4 cache code, it is not
part of the exported cache API, so make it static and don't export it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/cpu-sh4/cpu/cacheflush.h | 1 -
 arch/sh/mm/cache-sh4.c                   | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index a28c542f517..0afcf94ae55 100644
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -17,7 +17,6 @@
  *  so we need them.
  */
 void flush_cache_all(void);
-void flush_dcache_all(void);
 void flush_cache_mm(struct mm_struct *mm);
 #define flush_cache_dup_mm(mm) flush_cache_mm(mm)
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 4ac844b1432..4466787a52a 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -182,7 +182,7 @@ static void __uses_jump_to_uncached flush_icache_all(void)
 	local_irq_restore(flags);
 }
 
-void flush_dcache_all(void)
+static inline void flush_dcache_all(void)
 {
 	(*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size);
 	wmb();
-- 
cgit v1.2.3


From 7fbb2d3bdd33e58f54e360df0723d754f0b66153 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 11:25:32 +0900
Subject: sh: consolidate flush_dcache_mmap_lock/unlock() definitions.

All of the flush_dcache_mmap_lock()/flush_dcache_mmap_unlock()
definitions are identical across all CPUs, so just provide them
generically in asm/cacheflush.h.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h            | 5 +++--
 arch/sh/include/cpu-common/cpu/cacheflush.h | 2 --
 arch/sh/include/cpu-sh2a/cpu/cacheflush.h   | 2 --
 arch/sh/include/cpu-sh3/cpu/cacheflush.h    | 3 ---
 arch/sh/include/cpu-sh4/cpu/cacheflush.h    | 4 ----
 arch/sh/include/cpu-sh5/cpu/cacheflush.h    | 4 ----
 6 files changed, 3 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index e37654f7f54..52488eb6b73 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -20,8 +20,6 @@
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_icache_range(start, end)		do { } while (0)
 #define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 #define __flush_wback_region(start, size)	do { (void)(start); } while (0)
@@ -71,6 +69,9 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
 void kmap_coherent_init(void);
 void *kmap_coherent(struct page *page, unsigned long addr);
 void kunmap_coherent(void);
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
index 0c38278509c..b8c0a0a0c82 100644
--- a/arch/sh/include/cpu-common/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -32,8 +32,6 @@
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
 #define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 #define flush_icache_range(start, end)		do { } while (0)
 #define flush_icache_page(vma,pg)		do { } while (0)
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
index b9eaa19325e..e9ecb6d3dd3 100644
--- a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
@@ -23,8 +23,6 @@
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
 #define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 void flush_icache_range(unsigned long start, unsigned long end);
 #define flush_icache_page(vma,pg)		do { } while (0)
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
index cf656a09377..98c7a732455 100644
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -25,9 +25,6 @@ void flush_dcache_page(struct page *pg);
 void flush_icache_range(unsigned long start, unsigned long end);
 void flush_icache_page(struct vm_area_struct *vma, struct page *page);
 
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
 /* SH3 has unified cache so no special action needed here */
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 #define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index 0afcf94ae55..67d9bc98a58 100644
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -24,10 +24,6 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
 		      unsigned long pfn);
 void flush_dcache_page(struct page *pg);
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
 void flush_icache_range(unsigned long start, unsigned long end);
 void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 			     unsigned long addr, int len);
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index 8350cc7ed1c..e9c26bdf314 100644
--- a/arch/sh/include/cpu-sh5/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
@@ -20,10 +20,6 @@ extern void flush_icache_user_range(struct vm_area_struct *vma,
 				    int len);
 
 #define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
 #define flush_icache_page(vma, page)	do { } while (0)
 
 #endif /* __ASSEMBLY__ */
-- 
cgit v1.2.3


From 916e97834e023f89b31f796b53cc9c7956e7fe17 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 11:38:05 +0900
Subject: sh: Kill off unused flush_icache_user_range().

We use flush_cache_page() outright in copy_to_user_page(), and nothing
else needs it, so just kill it off. SH-5 still defines its own version,
but that too will go away in the same fashion once it converts over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h            |  1 -
 arch/sh/include/cpu-common/cpu/cacheflush.h |  1 -
 arch/sh/include/cpu-sh2a/cpu/cacheflush.h   |  1 -
 arch/sh/include/cpu-sh3/cpu/cacheflush.h    |  1 -
 arch/sh/include/cpu-sh4/cpu/cacheflush.h    |  2 --
 arch/sh/include/cpu-sh5/cpu/cacheflush.h    |  3 ---
 arch/sh/mm/cache-sh4.c                      | 14 --------------
 arch/sh/mm/cache-sh5.c                      |  2 +-
 8 files changed, 1 insertion(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 52488eb6b73..b1cf30f423a 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -21,7 +21,6 @@
 #define flush_icache_range(start, end)		do { } while (0)
 #define flush_icache_page(vma,pg)		do { } while (0)
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 #define __flush_wback_region(start, size)	do { (void)(start); } while (0)
 #define __flush_purge_region(start, size)	do { (void)(start); } while (0)
 #define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
index b8c0a0a0c82..5dc3736218e 100644
--- a/arch/sh/include/cpu-common/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -34,7 +34,6 @@
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_icache_range(start, end)		do { } while (0)
 #define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 
 #endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
index e9ecb6d3dd3..32a529187a3 100644
--- a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
@@ -25,7 +25,6 @@
 #define flush_dcache_page(page)			do { } while (0)
 void flush_icache_range(unsigned long start, unsigned long end);
 #define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
 
 #endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
index 98c7a732455..0f5cf5460d0 100644
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -27,7 +27,6 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page);
 
 /* SH3 has unified cache so no special action needed here */
 #define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
 
 #else
 #include <cpu-common/cpu/cacheflush.h>
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
index 67d9bc98a58..d6bd396d7df 100644
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -25,8 +25,6 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
 		      unsigned long pfn);
 void flush_dcache_page(struct page *pg);
 void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len);
 
 #define flush_icache_page(vma,pg)		do { } while (0)
 
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index e9c26bdf314..740d10a316e 100644
--- a/arch/sh/include/cpu-sh5/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
@@ -15,9 +15,6 @@ extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
 extern void flush_dcache_page(struct page *pg);
 extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_user_range(struct vm_area_struct *vma,
-				    struct page *page, unsigned long addr,
-				    int len);
 
 #define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
 #define flush_icache_page(vma, page)	do { } while (0)
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 4466787a52a..b5860535e61 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -401,20 +401,6 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 	}
 }
 
-/*
- * flush_icache_user_range
- * @vma: VMA of the process
- * @page: page
- * @addr: U0 address
- * @len: length of the range (< page size)
- */
-void flush_icache_user_range(struct vm_area_struct *vma,
-			     struct page *page, unsigned long addr, int len)
-{
-	flush_cache_page(vma, addr, page_to_pfn(page));
-	mb();
-}
-
 /**
  * __flush_cache_4096
  *
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 576cad04b11..a50d23caf01 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -655,7 +655,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
  * range following a poke into the program text through the ptrace() call
  * from another process (e.g. for BRK instruction insertion).
  */
-void flush_icache_user_range(struct vm_area_struct *vma,
+static void flush_icache_user_range(struct vm_area_struct *vma,
 			struct page *page, unsigned long addr, int len)
 {
 
-- 
cgit v1.2.3


From 37443ef3f0406e855e169c87ae3f4ffb4b6ff635 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 12:29:49 +0900
Subject: sh: Migrate SH-4 cacheflush ops to function pointers.

This paves the way for allowing individual CPUs to overload the
individual flushing routines that they care about without having to
depend on weak aliases. SH-4 is converted over initially, as it wires
up pretty much everything. The majority of the other CPUs will simply use
the default no-op implementation with their own region flushers wired up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h            | 37 +-----------
 arch/sh/include/cpu-common/cpu/cacheflush.h | 37 ++++++------
 arch/sh/include/cpu-sh4/cpu/cacheflush.h    | 31 ----------
 arch/sh/include/cpu-sh5/cpu/cacheflush.h    | 10 ++--
 arch/sh/mm/cache-sh4.c                      | 87 +++++++++++++++--------------
 arch/sh/mm/cache-sh5.c                      |  4 ++
 arch/sh/mm/cache.c                          | 70 +++++++++++++++++++++++
 arch/sh/mm/flush-sh4.c                      | 13 ++++-
 arch/sh/mm/init.c                           |  5 +-
 9 files changed, 159 insertions(+), 135 deletions(-)
 delete mode 100644 arch/sh/include/cpu-sh4/cpu/cacheflush.h

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index b1cf30f423a..25b7f46494d 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -1,46 +1,11 @@
 #ifndef __ASM_SH_CACHEFLUSH_H
 #define __ASM_SH_CACHEFLUSH_H
 
-#include <linux/mm.h>
-
 #ifdef __KERNEL__
 
-#ifdef CONFIG_CACHE_OFF
-/*
- * Nothing to do when the cache is disabled, initial flush and explicit
- * disabling is handled at CPU init time.
- *
- * See arch/sh/kernel/cpu/init.c:cache_init().
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
-#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
-#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
-#else
+#include <linux/mm.h>
 #include <cpu/cacheflush.h>
 
-/*
- * Consistent DMA requires that the __flush_xxx() primitives must be set
- * for any of the enabled non-coherent caches (most of the UP CPUs),
- * regardless of PIPT or VIPT cache configurations.
- */
-
-/* Flush (write-back only) a region (smaller than a page) */
-extern void __flush_wback_region(void *start, int size);
-/* Flush (write-back & invalidate) a region (smaller than a page) */
-extern void __flush_purge_region(void *start, int size);
-/* Flush (invalidate only) a region (smaller than a page) */
-extern void __flush_invalidate_region(void *start, int size);
-#endif
-
 #define ARCH_HAS_FLUSH_ANON_PAGE
 extern void __flush_anon_page(struct page *page, unsigned long);
 
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
index 5dc3736218e..8189dbd68f8 100644
--- a/arch/sh/include/cpu-common/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -1,14 +1,12 @@
 /*
- * include/asm-sh/cpu-sh2/cacheflush.h
- *
  * Copyright (C) 2003 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
-#define __ASM_CPU_SH2_CACHEFLUSH_H
+#ifndef __ASM_CPU_SH_CACHEFLUSH_H
+#define __ASM_CPU_SH_CACHEFLUSH_H
 
 /*
  * Cache flushing:
@@ -22,18 +20,23 @@
  *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
  *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
  *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-2, so
- *  we don't need them.
+ *  - flush_cache_sigtramp(vaddr) flushes the signal trampoline
  */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_icache_range(start, end)		do { } while (0)
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
+extern void (*flush_cache_all)(void);
+extern void (*flush_cache_mm)(struct mm_struct *mm);
+extern void (*flush_cache_dup_mm)(struct mm_struct *mm);
+extern void (*flush_cache_page)(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn);
+extern void (*flush_cache_range)(struct vm_area_struct *vma,
+				 unsigned long start, unsigned long end);
+extern void (*flush_dcache_page)(struct page *page);
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*flush_icache_page)(struct vm_area_struct *vma,
+				 struct page *page);
+extern void (*flush_cache_sigtramp)(unsigned long address);
+
+extern void (*__flush_wback_region)(void *start, int size);
+extern void (*__flush_purge_region)(void *start, int size);
+extern void (*__flush_invalidate_region)(void *start, int size);
 
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
+#endif /* __ASM_CPU_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
deleted file mode 100644
index d6bd396d7df..00000000000
--- a/arch/sh/include/cpu-sh4/cpu/cacheflush.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-sh/cpu-sh4/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
-#define __ASM_CPU_SH4_CACHEFLUSH_H
-
-/*
- *  Caches are broken on SH-4 (unless we use write-through
- *  caching; in which case they're only semi-broken),
- *  so we need them.
- */
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
-		      unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-
-#define flush_icache_page(vma,pg)		do { } while (0)
-
-#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
index 740d10a316e..202f637a0e1 100644
--- a/arch/sh/include/cpu-sh5/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
@@ -3,10 +3,6 @@
 
 #ifndef __ASSEMBLY__
 
-struct vm_area_struct;
-struct page;
-struct mm_struct;
-
 extern void flush_cache_all(void);
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_sigtramp(unsigned long vaddr);
@@ -16,10 +12,14 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, uns
 extern void flush_dcache_page(struct page *pg);
 extern void flush_icache_range(unsigned long start, unsigned long end);
 
+/* XXX .. */
+extern void (*__flush_wback_region)(void *start, int size);
+extern void (*__flush_purge_region)(void *start, int size);
+extern void (*__flush_invalidate_region)(void *start, int size);
+
 #define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
 #define flush_icache_page(vma, page)	do { } while (0)
 
 #endif /* __ASSEMBLY__ */
 
 #endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */
-
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b5860535e61..05cb04bc394 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -26,13 +26,6 @@
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
 #define MAX_ICACHE_PAGES	32
 
-static void __flush_dcache_segment_1way(unsigned long start,
-					unsigned long extent);
-static void __flush_dcache_segment_2way(unsigned long start,
-					unsigned long extent);
-static void __flush_dcache_segment_4way(unsigned long start,
-					unsigned long extent);
-
 static void __flush_cache_4096(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset);
 
@@ -44,39 +37,13 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys,
 static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
 	(void (*)(unsigned long, unsigned long))0xdeadbeef;
 
-/*
- * SH-4 has virtually indexed and physically tagged cache.
- */
-void __init sh4_cache_init(void)
-{
-	printk("PVR=%08x CVR=%08x PRR=%08x\n",
-		ctrl_inl(CCN_PVR),
-		ctrl_inl(CCN_CVR),
-		ctrl_inl(CCN_PRR));
-
-	switch (boot_cpu_data.dcache.ways) {
-	case 1:
-		__flush_dcache_segment_fn = __flush_dcache_segment_1way;
-		break;
-	case 2:
-		__flush_dcache_segment_fn = __flush_dcache_segment_2way;
-		break;
-	case 4:
-		__flush_dcache_segment_fn = __flush_dcache_segment_4way;
-		break;
-	default:
-		panic("unknown number of cache ways\n");
-		break;
-	}
-}
-
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
  * signal handler code and kprobes code
  */
-void flush_icache_range(unsigned long start, unsigned long end)
+static void sh4_flush_icache_range(unsigned long start, unsigned long end)
 {
 	int icacheaddr;
 	unsigned long flags, v;
@@ -137,7 +104,7 @@ static inline void flush_cache_4096(unsigned long start,
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-void flush_dcache_page(struct page *page)
+static void sh4_flush_dcache_page(struct page *page)
 {
 	struct address_space *mapping = page_mapping(page);
 
@@ -188,7 +155,7 @@ static inline void flush_dcache_all(void)
 	wmb();
 }
 
-void flush_cache_all(void)
+static void sh4_flush_cache_all(void)
 {
 	flush_dcache_all();
 	flush_icache_all();
@@ -280,7 +247,7 @@ loop_exit:
  *
  * Caller takes mm->mmap_sem.
  */
-void flush_cache_mm(struct mm_struct *mm)
+static void sh4_flush_cache_mm(struct mm_struct *mm)
 {
 	if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
 		return;
@@ -320,8 +287,8 @@ void flush_cache_mm(struct mm_struct *mm)
  * ADDR: Virtual Address (U0 address)
  * PFN: Physical page number
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
-		      unsigned long pfn)
+static void sh4_flush_cache_page(struct vm_area_struct *vma,
+		unsigned long address, unsigned long pfn)
 {
 	unsigned long phys = pfn << PAGE_SHIFT;
 	unsigned int alias_mask;
@@ -368,8 +335,8 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
  * Flushing the cache lines for U0 only isn't enough.
  * We need to flush for P1 too, which may contain aliases.
  */
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
+static void sh4_flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
 {
 	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
 		return;
@@ -668,3 +635,41 @@ static void __flush_dcache_segment_4way(unsigned long start,
 		a3 += linesz;
 	} while (a0 < a0e);
 }
+
+extern void __weak sh4__flush_region_init(void);
+
+/*
+ * SH-4 has virtually indexed and physically tagged cache.
+ */
+void __init sh4_cache_init(void)
+{
+	printk("PVR=%08x CVR=%08x PRR=%08x\n",
+		ctrl_inl(CCN_PVR),
+		ctrl_inl(CCN_CVR),
+		ctrl_inl(CCN_PRR));
+
+	switch (boot_cpu_data.dcache.ways) {
+	case 1:
+		__flush_dcache_segment_fn = __flush_dcache_segment_1way;
+		break;
+	case 2:
+		__flush_dcache_segment_fn = __flush_dcache_segment_2way;
+		break;
+	case 4:
+		__flush_dcache_segment_fn = __flush_dcache_segment_4way;
+		break;
+	default:
+		panic("unknown number of cache ways\n");
+		break;
+	}
+
+	flush_icache_range	= sh4_flush_icache_range;
+	flush_dcache_page	= sh4_flush_dcache_page;
+	flush_cache_all		= sh4_flush_cache_all;
+	flush_cache_mm		= sh4_flush_cache_mm;
+	flush_cache_dup_mm	= sh4_flush_cache_mm;
+	flush_cache_page	= sh4_flush_cache_page;
+	flush_cache_range	= sh4_flush_cache_range;
+
+	sh4__flush_region_init();
+}
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index a50d23caf01..a8f5142dc2c 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -20,6 +20,8 @@
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
 
+extern void __weak sh4__flush_region_init(void);
+
 /* Wired TLB entry for the D-cache */
 static unsigned long long dtlb_cache_slot;
 
@@ -27,6 +29,8 @@ void __init cpu_cache_init(void)
 {
 	/* Reserve a slot for dcache colouring in the DTLB */
 	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
+
+	sh4__flush_region_init();
 }
 
 void __init kmap_coherent_init(void)
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index a31e5c46e7a..da5bc6ac1b2 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -15,6 +15,62 @@
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
+void (*flush_cache_all)(void);
+void (*flush_cache_mm)(struct mm_struct *mm);
+void (*flush_cache_dup_mm)(struct mm_struct *mm);
+void (*flush_cache_page)(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn);
+void (*flush_cache_range)(struct vm_area_struct *vma,
+				 unsigned long start, unsigned long end);
+void (*flush_dcache_page)(struct page *page);
+void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*flush_icache_page)(struct vm_area_struct *vma,
+				 struct page *page);
+void (*flush_cache_sigtramp)(unsigned long address);
+void (*__flush_wback_region)(void *start, int size);
+void (*__flush_purge_region)(void *start, int size);
+void (*__flush_invalidate_region)(void *start, int size);
+
+static inline void noop_flush_cache_all(void)
+{
+}
+
+static inline void noop_flush_cache_mm(struct mm_struct *mm)
+{
+}
+
+static inline void noop_flush_cache_page(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn)
+{
+}
+
+static inline void noop_flush_cache_range(struct vm_area_struct *vma,
+				 unsigned long start, unsigned long end)
+{
+}
+
+static inline void noop_flush_dcache_page(struct page *page)
+{
+}
+
+static inline void noop_flush_icache_range(unsigned long start,
+					   unsigned long end)
+{
+}
+
+static inline void noop_flush_icache_page(struct vm_area_struct *vma,
+					  struct page *page)
+{
+}
+
+static inline void noop_flush_cache_sigtramp(unsigned long address)
+{
+}
+
+static inline void noop__flush_region(void *start, int size)
+{
+}
+
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long vaddr, void *dst, const void *src,
 		       unsigned long len)
@@ -174,6 +230,20 @@ void __init cpu_cache_init(void)
 	compute_alias(&boot_cpu_data.dcache);
 	compute_alias(&boot_cpu_data.scache);
 
+	flush_cache_all		= noop_flush_cache_all;
+	flush_cache_mm		= noop_flush_cache_mm;
+	flush_cache_dup_mm	= noop_flush_cache_mm;
+	flush_cache_page	= noop_flush_cache_page;
+	flush_cache_range	= noop_flush_cache_range;
+	flush_dcache_page	= noop_flush_dcache_page;
+	flush_icache_range	= noop_flush_icache_range;
+	flush_icache_page	= noop_flush_icache_page;
+	flush_cache_sigtramp	= noop_flush_cache_sigtramp;
+
+	__flush_wback_region		= noop__flush_region;
+	__flush_purge_region		= noop__flush_region;
+	__flush_invalidate_region	= noop__flush_region;
+
 	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
index 1b6b6a12a99..99c50dc7551 100644
--- a/arch/sh/mm/flush-sh4.c
+++ b/arch/sh/mm/flush-sh4.c
@@ -8,7 +8,7 @@
  * START: Virtual Address (U0, P1, or P3)
  * SIZE: Size of the region.
  */
-void __weak __flush_wback_region(void *start, int size)
+static void sh4__flush_wback_region(void *start, int size)
 {
 	reg_size_t aligned_start, v, cnt, end;
 
@@ -51,7 +51,7 @@ void __weak __flush_wback_region(void *start, int size)
  * START: Virtual Address (U0, P1, or P3)
  * SIZE: Size of the region.
  */
-void __weak __flush_purge_region(void *start, int size)
+static void sh4__flush_purge_region(void *start, int size)
 {
 	reg_size_t aligned_start, v, cnt, end;
 
@@ -90,7 +90,7 @@ void __weak __flush_purge_region(void *start, int size)
 /*
  * No write back please
  */
-void __weak __flush_invalidate_region(void *start, int size)
+static void sh4__flush_invalidate_region(void *start, int size)
 {
 	reg_size_t aligned_start, v, cnt, end;
 
@@ -126,3 +126,10 @@ void __weak __flush_invalidate_region(void *start, int size)
 		cnt--;
 	}
 }
+
+void __init sh4__flush_region_init(void)
+{
+	__flush_wback_region		= sh4__flush_wback_region;
+	__flush_invalidate_region	= sh4__flush_invalidate_region;
+	__flush_purge_region		= sh4__flush_purge_region;
+}
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index cf0e9c5146b..0a9b4d855bc 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -210,6 +210,9 @@ void __init mem_init(void)
 			high_memory = node_high_memory;
 	}
 
+	/* Set this up early, so we can take care of the zero page */
+	cpu_cache_init();
+
 	/* clear the zero-page */
 	memset(empty_zero_page, 0, PAGE_SIZE);
 	__flush_wback_region(empty_zero_page, PAGE_SIZE);
@@ -230,8 +233,6 @@ void __init mem_init(void)
 		datasize >> 10,
 		initsize >> 10);
 
-	cpu_cache_init();
-
 	/* Initialize the vDSO */
 	vsyscall_init();
 }
-- 
cgit v1.2.3


From 109b44a82a7a8ae32d7fb257480f92f2d96f0daf Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 12:35:15 +0900
Subject: sh: Convert SH-2 to new cacheflush interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh2.c | 13 ++++++++++---
 arch/sh/mm/cache.c     |  6 ++++++
 2 files changed, 16 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index c4e80d2b764..699a71f4632 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -16,7 +16,7 @@
 #include <asm/cacheflush.h>
 #include <asm/io.h>
 
-void __flush_wback_region(void *start, int size)
+static void sh2__flush_wback_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -37,7 +37,7 @@ void __flush_wback_region(void *start, int size)
 	}
 }
 
-void __flush_purge_region(void *start, int size)
+static void sh2__flush_purge_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -51,7 +51,7 @@ void __flush_purge_region(void *start, int size)
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 }
 
-void __flush_invalidate_region(void *start, int size)
+static void sh2__flush_invalidate_region(void *start, int size)
 {
 #ifdef CONFIG_CACHE_WRITEBACK
 	/*
@@ -82,3 +82,10 @@ void __flush_invalidate_region(void *start, int size)
 			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 #endif
 }
+
+void __init sh2_cache_init(void)
+{
+	__flush_wback_region		= sh2__flush_wback_region;
+	__flush_purge_region		= sh2__flush_purge_region;
+	__flush_invalidate_region	= sh2__flush_invalidate_region;
+}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index da5bc6ac1b2..5ac299d6604 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -244,6 +244,12 @@ void __init cpu_cache_init(void)
 	__flush_purge_region		= noop__flush_region;
 	__flush_invalidate_region	= noop__flush_region;
 
+	if (boot_cpu_data.family == CPU_FAMILY_SH2) {
+		extern void __weak sh2_cache_init(void);
+
+		sh2_cache_init();
+	}
+
 	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
-- 
cgit v1.2.3


From a58e1a2ab4f6334c50dfbda83d3a5c6e0b2b4bee Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 12:38:29 +0900
Subject: sh: Convert SH-2A to new cacheflush interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/cpu-sh2a/cpu/cacheflush.h | 30 ------------------------------
 arch/sh/mm/cache-sh2a.c                   | 17 +++++++++++++----
 arch/sh/mm/cache.c                        |  6 ++++++
 3 files changed, 19 insertions(+), 34 deletions(-)
 delete mode 100644 arch/sh/include/cpu-sh2a/cpu/cacheflush.h

(limited to 'arch')

diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
deleted file mode 100644
index 32a529187a3..00000000000
--- a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H
-#define __ASM_CPU_SH2A_CACHEFLUSH_H
-
-/* 
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- *  Caches are indexed (effectively) by physical address on SH-2, so
- *  we don't need them.
- */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define flush_dcache_page(page)			do { } while (0)
-void flush_icache_range(unsigned long start, unsigned long end);
-#define flush_icache_page(vma,pg)		do { } while (0)
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-
-#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index 24d86a79406..96a41872dfd 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -15,7 +15,7 @@
 #include <asm/cacheflush.h>
 #include <asm/io.h>
 
-void __flush_wback_region(void *start, int size)
+static void sh2a__flush_wback_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -44,7 +44,7 @@ void __flush_wback_region(void *start, int size)
 	local_irq_restore(flags);
 }
 
-void __flush_purge_region(void *start, int size)
+static void sh2a__flush_purge_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -65,7 +65,7 @@ void __flush_purge_region(void *start, int size)
 	local_irq_restore(flags);
 }
 
-void __flush_invalidate_region(void *start, int size)
+static void sh2a__flush_invalidate_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -97,7 +97,7 @@ void __flush_invalidate_region(void *start, int size)
 }
 
 /* WBack O-Cache and flush I-Cache */
-void flush_icache_range(unsigned long start, unsigned long end)
+static void sh2a_flush_icache_range(unsigned long start, unsigned long end)
 {
 	unsigned long v;
 	unsigned long flags;
@@ -127,3 +127,12 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	back_to_cached();
 	local_irq_restore(flags);
 }
+
+void __init sh2a_cache_init(void)
+{
+	flush_icache_range		= sh2a_flush_icache_range;
+
+	__flush_wback_region		= sh2a__flush_wback_region;
+	__flush_purge_region		= sh2a__flush_purge_region;
+	__flush_invalidate_region	= sh2a__flush_invalidate_region;
+}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 5ac299d6604..b56cce40891 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -250,6 +250,12 @@ void __init cpu_cache_init(void)
 		sh2_cache_init();
 	}
 
+	if (boot_cpu_data.family == CPU_FAMILY_SH2A) {
+		extern void __weak sh2a_cache_init(void);
+
+		sh2a_cache_init();
+	}
+
 	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
-- 
cgit v1.2.3


From 79f1c9da5e5fc5f4705836d8c1cee2213fc80640 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 12:42:55 +0900
Subject: sh: Convert SH-3 to new cacheflush interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh3.c | 25 +++++++++++++++----------
 arch/sh/mm/cache.c     |  6 ++++++
 2 files changed, 21 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh3.c b/arch/sh/mm/cache-sh3.c
index 6d1dbec08ad..faef80c9813 100644
--- a/arch/sh/mm/cache-sh3.c
+++ b/arch/sh/mm/cache-sh3.c
@@ -32,7 +32,7 @@
  * SIZE: Size of the region.
  */
 
-void __flush_wback_region(void *start, int size)
+static void sh3__flush_wback_region(void *start, int size)
 {
 	unsigned long v, j;
 	unsigned long begin, end;
@@ -71,7 +71,7 @@ void __flush_wback_region(void *start, int size)
  * START: Virtual Address (U0, P1, or P3)
  * SIZE: Size of the region.
  */
-void __flush_purge_region(void *start, int size)
+static void sh3__flush_purge_region(void *start, int size)
 {
 	unsigned long v;
 	unsigned long begin, end;
@@ -90,11 +90,16 @@ void __flush_purge_region(void *start, int size)
 	}
 }
 
-/*
- * No write back please
- *
- * Except I don't think there's any way to avoid the writeback. So we
- * just alias it to __flush_purge_region(). dwmw2.
- */
-void __flush_invalidate_region(void *start, int size)
-	__attribute__((alias("__flush_purge_region")));
+void __init sh3_cache_init(void)
+{
+	__flush_wback_region = sh3__flush_wback_region;
+	__flush_purge_region = sh3__flush_purge_region;
+
+	/*
+	 * No write back please
+	 *
+	 * Except I don't think there's any way to avoid the writeback.
+	 * So we just alias it to sh3__flush_purge_region(). dwmw2.
+	 */
+	__flush_invalidate_region = sh3__flush_purge_region;
+}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index b56cce40891..c9480b48c74 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -256,6 +256,12 @@ void __init cpu_cache_init(void)
 		sh2a_cache_init();
 	}
 
+	if (boot_cpu_data.family == CPU_FAMILY_SH3) {
+		extern void __weak sh3_cache_init(void);
+
+		sh3_cache_init();
+	}
+
 	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4A) ||
 	    (boot_cpu_data.family == CPU_FAMILY_SH4AL_DSP)) {
-- 
cgit v1.2.3


From 0d051d90bb08b516b9d6c30d25f83d3c6b5b1c1d Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 12:53:39 +0900
Subject: sh: Convert SH7705 extended mode to new cacheflush interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/cpu-sh3/cpu/cacheflush.h | 35 --------------------------------
 arch/sh/mm/cache-sh7705.c                | 33 +++++++++++++++++++++---------
 arch/sh/mm/cache.c                       |  7 +++++++
 3 files changed, 30 insertions(+), 45 deletions(-)
 delete mode 100644 arch/sh/include/cpu-sh3/cpu/cacheflush.h

(limited to 'arch')

diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
deleted file mode 100644
index 0f5cf5460d0..00000000000
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-                              unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr)		do { } while (0)
-
-#else
-#include <cpu-common/cpu/cacheflush.h>
-#endif
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index fa37bff306b..f1d5c803c04 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -64,7 +64,7 @@ static inline void cache_wback_all(void)
  *
  * Called from kernel/module.c:sys_init_module and routine for a.out format.
  */
-void flush_icache_range(unsigned long start, unsigned long end)
+static void sh7705_flush_icache_range(unsigned long start, unsigned long end)
 {
 	__flush_wback_region((void *)start, end - start);
 }
@@ -72,7 +72,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
 /*
  * Writeback&Invalidate the D-cache of the page
  */
-static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
+static void __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
 	unsigned long flags;
@@ -127,7 +127,7 @@ static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-void flush_dcache_page(struct page *page)
+static void sh7705_flush_dcache_page(struct page *page)
 {
 	struct address_space *mapping = page_mapping(page);
 
@@ -137,7 +137,7 @@ void flush_dcache_page(struct page *page)
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
-void __uses_jump_to_uncached flush_cache_all(void)
+static void sh7705_flush_cache_all(void)
 {
 	unsigned long flags;
 
@@ -149,7 +149,7 @@ void __uses_jump_to_uncached flush_cache_all(void)
 	local_irq_restore(flags);
 }
 
-void flush_cache_mm(struct mm_struct *mm)
+static void sh7705_flush_cache_mm(struct mm_struct *mm)
 {
 	/* Is there any good way? */
 	/* XXX: possibly call flush_cache_range for each vm area */
@@ -165,8 +165,8 @@ void flush_cache_mm(struct mm_struct *mm)
  * Flushing the cache lines for U0 only isn't enough.
  * We need to flush for P1 too, which may contain aliases.
  */
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
+static void sh7705_flush_cache_range(struct vm_area_struct *vma,
+			unsigned long start, unsigned long end)
 {
 
 	/*
@@ -184,8 +184,8 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
  *
  * ADDRESS: Virtual Address (U0 address)
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
-		      unsigned long pfn)
+static void sh7705_flush_cache_page(struct vm_area_struct *vma,
+		unsigned long address, unsigned long pfn)
 {
 	__flush_dcache_page(pfn << PAGE_SHIFT);
 }
@@ -198,7 +198,20 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address,
  * Not entirely sure why this is necessary on SH3 with 32K cache but
  * without it we get occasional "Memory fault" when loading a program.
  */
-void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+static void sh7705_flush_icache_page(struct vm_area_struct *vma,
+				     struct page *page)
 {
 	__flush_purge_region(page_address(page), PAGE_SIZE);
 }
+
+void __init sh7705_cache_init(void)
+{
+	flush_icache_range	= sh7705_flush_icache_range;
+	flush_dcache_page	= sh7705_flush_dcache_page;
+	flush_cache_all		= sh7705_flush_cache_all;
+	flush_cache_mm		= sh7705_flush_cache_mm;
+	flush_cache_dup_mm	= sh7705_flush_cache_mm;
+	flush_cache_range	= sh7705_flush_cache_range;
+	flush_cache_page	= sh7705_flush_cache_page;
+	flush_icache_page	= sh7705_flush_icache_page;
+}
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index c9480b48c74..8618ccdc1ca 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -260,6 +260,13 @@ void __init cpu_cache_init(void)
 		extern void __weak sh3_cache_init(void);
 
 		sh3_cache_init();
+
+		if ((boot_cpu_data.type == CPU_SH7705) &&
+		    (boot_cpu_data.dcache.sets == 512)) {
+			extern void __weak sh7705_cache_init(void);
+
+			sh7705_cache_init();
+		}
 	}
 
 	if ((boot_cpu_data.family == CPU_FAMILY_SH4) ||
-- 
cgit v1.2.3


From 9747e78b304b44d6fb73e2c8071406d55aa8bb75 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Sat, 15 Aug 2009 02:53:34 +0000
Subject: sh: use in-soc KEYSC on se7724

This patch updates the Solution Engine 7724 board code to use
in-SoC KEYSC resources for the keyboard platform device. Using
the in-SoC key scan controller fixes a crash-during-resume issue.

Without this patch the KEYSC hardware block located in the board
specific FPGA is used together with an external IRQ which is
routed through the FPGA and handled by some board specific demux
code. This board specific FPGA interrupt code does not implement
desc->set_wake() so the enable_irq_wake() call in the sh_keysc
driver will fail at suspend-to-ram time and the disable_irq_wake()
will bomb out when resuming.

Changing the platform data to use the in-SoC KEYSC hardware makes
the se7724 board support code less special which is a good thing.
Also, the board specific KEYSC pin setup code selects in-SoC pin
functions already which makes the current FPGA platform device data
look like a typo.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 8fed45a2fb8..15456a0773b 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -238,7 +238,7 @@ static struct platform_device ceu1_device = {
 	},
 };
 
-/* KEYSC */
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
 	.scan_timing = 10,
@@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = {
 
 static struct resource keysc_resources[] = {
 	[0] = {
-		.start  = 0x1a204000,
-		.end    = 0x1a20400f,
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = IRQ0_KEY,
+		.start  = 79,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
-- 
cgit v1.2.3


From 237674e050ae8ea40a432412df6c15d60b7ae8a6 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Sat, 15 Aug 2009 02:53:42 +0000
Subject: sh: sh7724 ddr self-refresh changes

This patch updates the SuperH Mobile sleep assembly code with
support for DBSC memory controller found in the sh7724 processor.

Without this fix the memory hooked up to the sh7724 processor
will never enter self-refresh mode before suspending to ram. The
effect of this is that the memory contents most likeley will be
lost upon resume which may or may not be what you want.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/shmobile/sleep.S | 70 +++++++++++++++++++++++++++++++++++--
 1 file changed, 68 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index 5d888ef53d8..baf2d7d46b0 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -26,8 +26,30 @@ ENTRY(sh_mobile_standby)
 
 	tst	#SUSP_SH_SF, r0
 	bt	skip_set_sf
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+	/* DBSC: put memory in self-refresh mode */
 
-	/* SDRAM: disable power down and put in self-refresh mode */
+	mov.l	dben_reg, r4
+	mov.l	dben_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data1, r1
+	mov.l	r1, @r4
+#else
+	/* SBSC: disable power down and put in self-refresh mode */
 	mov.l	1f, r4
 	mov.l	2f, r1
 	mov.l	@r4, r2
@@ -35,6 +57,7 @@ ENTRY(sh_mobile_standby)
 	mov.l   3f, r3
 	and	r3, r2
 	mov.l	r2, @r4
+#endif
 
 skip_set_sf:
 	tst	#SUSP_SH_SLEEP, r0
@@ -84,7 +107,36 @@ done_sleep:
 	tst	#SUSP_SH_SF, r0
 	bt	skip_restore_sf
 
-	/* SDRAM: set auto-refresh mode */
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data0, r1
+	mov.l	r1, @r4
+
+	/* sleep 140 ns */
+	nop
+	nop
+	nop
+	nop
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data0, r1
+	mov.l	r1, @r4
+
+	mov.l	dbcmdcnt_reg, r4
+	mov.l	dbcmdcnt_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dben_reg, r4
+	mov.l	dben_data1, r1
+	mov.l	r1, @r4
+
+	mov.l	dbrfpdn0_reg, r4
+	mov.l	dbrfpdn0_data2, r1
+	mov.l	r1, @r4
+#else
+	/* SBSC: set auto-refresh mode */
 	mov.l	1f, r4
 	mov.l	@r4, r2
 	mov.l   4f, r3
@@ -98,15 +150,29 @@ done_sleep:
 	add	r4, r3
 	or	r2, r3
 	mov.l	r3, @r1
+#endif
 skip_restore_sf:
 	rts
 	 nop
 
 	.balign 4
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+dben_reg:	.long	0xfd000010 /* DBEN */
+dben_data0:	.long	0
+dben_data1:	.long	1
+dbrfpdn0_reg:	.long	0xfd000040 /* DBRFPDN0 */
+dbrfpdn0_data0:	.long	0
+dbrfpdn0_data1:	.long	1
+dbrfpdn0_data2:	.long	0x00010000
+dbcmdcnt_reg:	.long	0xfd000014 /* DBCMDCNT */
+dbcmdcnt_data0:	.long	2
+dbcmdcnt_data1:	.long	4
+#else
 1:	.long	0xfe400008 /* SDCR0 */
 2:	.long	0x00000400
 3:	.long	0xffff7fff
 4:	.long	0xfffffbff
+#endif
 5:	.long	0xa4150020 /* STBCR */
 6:	.long   0xfe40001c /* RTCOR */
 7:	.long   0xfe400018 /* RTCNT */
-- 
cgit v1.2.3


From 963e04cafbf001ec431025a46ec246ae6d89daba Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Sat, 15 Aug 2009 03:02:08 +0000
Subject: sh: Runtime PM pdev hwblk - kfr2r09 LCDC

This patch simply adds LCDC hwblk_id data for the kfr2r09 board.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index c96533794c2..f9ba43635dc 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -176,6 +176,9 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
 	.dev	= {
 		.platform_data	= &kfr2r09_sh_lcdc_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
 };
 
 static struct platform_device *kfr2r09_devices[] __initdata = {
-- 
cgit v1.2.3


From eccee7457df2b1e1505522ab0064e577e16eed75 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 15 Aug 2009 13:15:02 +0900
Subject: sh: Kill off the unhandled pvr case in SH-4 CPU probing.

This is superfluous, as the default CPU type and family are already
established by the initial cpuinfo definition. Given that we are still
able to probe for the CPU family even if we are not able to detect the
subtype, it's preferable to let the probing code fill out what it can and
leave the rest.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4/probe.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 1148607c36b..695026a3f02 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -177,9 +177,6 @@ int __init detect_cpu_and_cache_system(void)
 		boot_cpu_data.icache.ways = 2;
 		boot_cpu_data.dcache.ways = 2;
 
-		break;
-	default:
-		boot_cpu_data.type = boot_cpu_data.family = CPU_SH_NONE;
 		break;
 	}
 
-- 
cgit v1.2.3


From 1be396794897f80bfc8774719ba60309a9e3d374 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 14 Aug 2009 15:47:20 +0200
Subject: timekeeping: Move reset of cycle_last for tsc clocksource to tsc

change_clocksource resets the cycle_last value to zero then sets it to
a value read from the clocksource. The reset to zero is required only
for the TSC clocksource to make the read_tsc function work after a
resume. The reason is that the TSC read function uses cycle_last to
detect backwards going TSCs. In the resume case cycle_last contains
the TSC value from the last update before the suspend. On resume the
TSC starts counting from 0 again and would trip over the cycle_last
comparison.

This is subtle and surprising. Move the reset to a resume function in
the tsc code.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134808.142191175@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/tsc.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 71f4368b357..968425422c4 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -744,10 +744,16 @@ static cycle_t __vsyscall_fn vread_tsc(void)
 }
 #endif
 
+static void resume_tsc(void)
+{
+	clocksource_tsc.cycle_last = 0;
+}
+
 static struct clocksource clocksource_tsc = {
 	.name                   = "tsc",
 	.rating                 = 300,
 	.read                   = read_tsc,
+	.resume			= resume_tsc,
 	.mask                   = CLOCKSOURCE_MASK(64),
 	.shift                  = 22,
 	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS |
-- 
cgit v1.2.3


From f1b82746c1e93daf24e1ab9bfbd39bcdb2e7018b Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 14 Aug 2009 15:47:21 +0200
Subject: clocksource: Cleanup clocksource selection

If a non high-resolution clocksource is first set as override clock
and then registered it becomes active even if the system is in one-shot
mode. Move the override check from sysfs_override_clocksource to the
clocksource selection. That fixes the bug and simplifies the code. The
check in clocksource_register for double registration of the same
clocksource is removed without replacement.

To find the initial clocksource a new weak function in jiffies.c is
defined that returns the jiffies clocksource. The architecture code
can then override the weak function with a more suitable clocksource,
e.g. the TOD clock on s390.

[ tglx: Folded in a fix from John Stultz ]

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134808.388024160@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/s390/kernel/time.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d4c8e9c47c8..afefe514df0 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -205,6 +205,10 @@ static struct clocksource clocksource_tod = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+struct clocksource * __init clocksource_default_clock(void)
+{
+	return &clocksource_tod;
+}
 
 void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
 {
-- 
cgit v1.2.3


From 155ec60226ae0ae2aadaa57c951a58a359331030 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 14 Aug 2009 15:47:26 +0200
Subject: timekeeping: Introduce struct timekeeper

Add struct timekeeper to keep the internal values timekeeping.c needs
in regard to the currently selected clock source. This moves the
timekeeping intervals, xtime_nsec and the ntp error value from struct
clocksource to struct timekeeper. The raw_time is removed from the
clocksource as well. It gets treated like xtime as a global variable.
Eventually xtime raw_time should be moved to struct timekeeper.

[ tglx: minor cleanup ]

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134809.613209842@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/s390/kernel/time.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index afefe514df0..e76c2e7a8b9 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -280,7 +280,6 @@ void __init time_init(void)
 	now = get_clock();
 	tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
 	clocksource_tod.cycle_last = now;
-	clocksource_tod.raw_time = xtime;
 	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
 	set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
 	write_sequnlock_irqrestore(&xtime_lock, flags);
-- 
cgit v1.2.3


From 0a54419836254a27baecd9037103171bcbabaf67 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 14 Aug 2009 15:47:28 +0200
Subject: timekeeping: Move NTP adjusted clock multiplier to struct timekeeper

The clocksource structure has two multipliers, the unmodified multiplier
clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP
multiplier is misplaced in the struct clocksource, this is private
information of the timekeeping code. Add the mult field to the struct
timekeeper to contain the NTP corrected value, keep the unmodifed
multiplier in clock->mult and remove clock->mult_orig.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134810.149047645@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/arm/plat-omap/common.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ebcf006406f..95587b6c025 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -253,11 +253,8 @@ static struct clocksource clocksource_32k = {
  */
 unsigned long long sched_clock(void)
 {
-	unsigned long long ret;
-
-	ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
-	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
-	return ret;
+	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
+				  clocksource_32k.mult, clocksource_32k.shift);
 }
 
 static int __init omap_init_clocksource_32k(void)
-- 
cgit v1.2.3


From d4f587c67fc39e0030ddd718675e252e208da4d7 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 14 Aug 2009 15:47:31 +0200
Subject: timekeeping: Increase granularity of read_persistent_clock()

The persistent clock of some architectures (e.g. s390) have a
better granularity than seconds. To reduce the delta between the
host clock and the guest clock in a virtualized system change the
read_persistent_clock function to return a struct timespec.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134811.013873340@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/m68knommu/kernel/time.c          |  5 +++--
 arch/mips/dec/time.c                  |  5 +++--
 arch/mips/lasat/ds1603.c              |  5 +++--
 arch/mips/lasat/sysctl.c              |  8 ++++++--
 arch/mips/lemote/lm2e/setup.c         |  5 +++--
 arch/mips/mti-malta/malta-time.c      |  5 +++--
 arch/mips/pmc-sierra/yosemite/setup.c |  5 +++--
 arch/mips/sibyte/swarm/setup.c        | 15 +++++++++++----
 arch/mips/sni/time.c                  |  5 +++--
 arch/powerpc/kernel/time.c            |  7 ++++---
 arch/s390/kernel/time.c               | 22 ++++------------------
 arch/sh/kernel/time.c                 |  6 ++----
 arch/x86/kernel/rtc.c                 |  5 +++--
 arch/xtensa/kernel/time.c             |  5 ++---
 14 files changed, 53 insertions(+), 50 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index d182b2f7221..68432248515 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -72,9 +72,10 @@ static unsigned long read_rtc_mmss(void)
 	return  mktime(year, mon, day, hour, min, sec);;
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	return read_rtc_mmss();
+	ts->tv_sec = read_rtc_mmss();
+	ts->tv_nsec = 0;
 }
 
 int update_persistent_clock(struct timespec now)
diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c
index 463136e6685..02f505f23c3 100644
--- a/arch/mips/dec/time.c
+++ b/arch/mips/dec/time.c
@@ -18,7 +18,7 @@
 #include <asm/dec/ioasic.h>
 #include <asm/dec/machtype.h>
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, mon, day, hour, min, sec, real_year;
 	unsigned long flags;
@@ -53,7 +53,8 @@ unsigned long read_persistent_clock(void)
 
 	year += real_year - 72 + 2000;
 
-	return mktime(year, mon, day, hour, min, sec);
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
 }
 
 /*
diff --git a/arch/mips/lasat/ds1603.c b/arch/mips/lasat/ds1603.c
index 52cb1436a12..c6fd96ff118 100644
--- a/arch/mips/lasat/ds1603.c
+++ b/arch/mips/lasat/ds1603.c
@@ -135,7 +135,7 @@ static void rtc_end_op(void)
 	lasat_ndelay(1000);
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned long word;
 	unsigned long flags;
@@ -147,7 +147,8 @@ unsigned long read_persistent_clock(void)
 	rtc_end_op();
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	return word;
+	ts->tv_sec = word;
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_mmss(unsigned long time)
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 8f88886feb1..3f04d4c406b 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -92,10 +92,12 @@ static int rtctmp;
 int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
+	struct timespec ts;
 	int r;
 
 	if (!write) {
-		rtctmp = read_persistent_clock();
+		read_persistent_clock(&ts);
+		rtctmp = ts.tv_sec;
 		/* check for time < 0 and set to 0 */
 		if (rtctmp < 0)
 			rtctmp = 0;
@@ -134,9 +136,11 @@ int sysctl_lasat_rtc(ctl_table *table,
 		    void *oldval, size_t *oldlenp,
 		    void *newval, size_t newlen)
 {
+	struct timespec ts;
 	int r;
 
-	rtctmp = read_persistent_clock();
+	read_persistent_clock(&ts);
+	rtctmp = ts.tv_sec;
 	if (rtctmp < 0)
 		rtctmp = 0;
 	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c
index ebd6ceaef2f..24b355df612 100644
--- a/arch/mips/lemote/lm2e/setup.c
+++ b/arch/mips/lemote/lm2e/setup.c
@@ -54,9 +54,10 @@ void __init plat_time_init(void)
 	mips_hpt_frequency = cpu_clock_freq / 2;
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	return mc146818_get_cmos_time();
+	ts->tv_sec = mc146818_get_cmos_time();
+	ts->tv_nsec = 0;
 }
 
 void (*__wbflush)(void);
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index 0b97d47691f..3c6f190aa61 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -100,9 +100,10 @@ static unsigned int __init estimate_cpu_frequency(void)
 	return count;
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	return mc146818_get_cmos_time();
+	ts->tv_sec = mc146818_get_cmos_time();
+	ts->tv_nsec = 0;
 }
 
 static void __init plat_perf_setup(void)
diff --git a/arch/mips/pmc-sierra/yosemite/setup.c b/arch/mips/pmc-sierra/yosemite/setup.c
index 2d3c0dca275..3498ac9c35a 100644
--- a/arch/mips/pmc-sierra/yosemite/setup.c
+++ b/arch/mips/pmc-sierra/yosemite/setup.c
@@ -70,7 +70,7 @@ void __init bus_error_init(void)
 }
 
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, month, day, hour, min, sec;
 	unsigned long flags;
@@ -92,7 +92,8 @@ unsigned long read_persistent_clock(void)
 	m48t37_base->control = 0x00;
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	return mktime(year, month, day, hour, min, sec);
+	ts->tv_sec = mktime(year, month, day, hour, min, sec);
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long tim)
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 672e45d495a..623ffc933c4 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -87,19 +87,26 @@ enum swarm_rtc_type {
 
 enum swarm_rtc_type swarm_rtc_type;
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
+	unsigned long sec;
+
 	switch (swarm_rtc_type) {
 	case RTC_XICOR:
-		return xicor_get_time();
+		sec = xicor_get_time();
+		break;
 
 	case RTC_M4LT81:
-		return m41t81_get_time();
+		sec = m41t81_get_time();
+		break;
 
 	case RTC_NONE:
 	default:
-		return mktime(2000, 1, 1, 0, 0, 0);
+		sec = mktime(2000, 1, 1, 0, 0, 0);
+		break;
 	}
+	ts->tv_sec = sec;
+	tv->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long sec)
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 0d9ec1a5c24..62df6a598e0 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -182,7 +182,8 @@ void __init plat_time_init(void)
 	setup_pit_timer();
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	return -1;
+	ts->tv_sec = -1;
+	ts->tv_nsec = 0;
 }
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index eae4511ceea..ad63f30fe3d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -769,7 +769,7 @@ int update_persistent_clock(struct timespec now)
 	return ppc_md.set_rtc_time(&tm);
 }
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	struct rtc_time tm;
 	static int first = 1;
@@ -787,8 +787,9 @@ unsigned long read_persistent_clock(void)
 	if (!ppc_md.get_rtc_time)
 		return 0;
 	ppc_md.get_rtc_time(&tm);
-	return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
-		      tm.tm_hour, tm.tm_min, tm.tm_sec);
+	ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+			    tm.tm_hour, tm.tm_min, tm.tm_sec);
+	ts->tv_nsec = 0;
 }
 
 /* clocksource code */
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index e76c2e7a8b9..a94ec48587b 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -182,12 +182,9 @@ static void timing_alert_interrupt(__u16 code)
 static void etr_reset(void);
 static void stp_reset(void);
 
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	struct timespec ts;
-
-	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
-	return ts.tv_sec;
+	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, ts);
 }
 
 static cycle_t read_tod_clock(struct clocksource *cs)
@@ -248,7 +245,6 @@ void __init time_init(void)
 {
 	struct timespec ts;
 	unsigned long flags;
-	cycle_t now;
 
 	/* Reset time synchronization interfaces. */
 	etr_reset();
@@ -266,20 +262,10 @@ void __init time_init(void)
 		panic("Could not register TOD clock source");
 
 	/*
-	 * The TOD clock is an accurate clock. The xtime should be
-	 * initialized in a way that the difference between TOD and
-	 * xtime is reasonably small. Too bad that timekeeping_init
-	 * sets xtime.tv_nsec to zero. In addition the clock source
-	 * change from the jiffies clock source to the TOD clock
-	 * source add another error of up to 1/HZ second. The same
-	 * function sets wall_to_monotonic to a value that is too
-	 * small for /proc/uptime to be accurate.
-	 * Reset xtime and wall_to_monotonic to sane values.
+	 * Reset wall_to_monotonic to the initial timestamp created
+	 * in head.S to get a precise value in /proc/uptime.
 	 */
 	write_seqlock_irqsave(&xtime_lock, flags);
-	now = get_clock();
-	tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
-	clocksource_tod.cycle_last = now;
 	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
 	set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
 	write_sequnlock_irqrestore(&xtime_lock, flags);
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 9b352a1e3fb..3f4706aa975 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -39,11 +39,9 @@ void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
 int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
 
 #ifdef CONFIG_GENERIC_CMOS_UPDATE
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	struct timespec tv;
-	rtc_sh_get_time(&tv);
-	return tv.tv_sec;
+	rtc_sh_get_time(&ts);
 }
 
 int update_persistent_clock(struct timespec now)
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 5d465b207e7..bf67dcb4a44 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -178,7 +178,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 }
 
 /* not static: needed by APM */
-unsigned long read_persistent_clock(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned long retval, flags;
 
@@ -186,7 +186,8 @@ unsigned long read_persistent_clock(void)
 	retval = get_wallclock();
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
-	return retval;
+	ts->tv_sec = retval;
+	ts->tv_nsec = 0;
 }
 
 int update_persistent_clock(struct timespec now)
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 8848120d291..19085ff0484 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -59,9 +59,8 @@ static struct irqaction timer_irqaction = {
 
 void __init time_init(void)
 {
-	xtime.tv_nsec = 0;
-	xtime.tv_sec = read_persistent_clock();
-
+	/* FIXME: xtime&wall_to_monotonic are set in timekeeping_init. */
+	read_persistent_clock(&xtime);
 	set_normalized_timespec(&wall_to_monotonic,
 		-xtime.tv_sec, -xtime.tv_nsec);
 
-- 
cgit v1.2.3


From 23970e389e9cee43c4b41023935e1417271708b2 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 14 Aug 2009 15:47:32 +0200
Subject: timekeeping: Introduce read_boot_clock

Add the new function read_boot_clock to get the exact time the system
has been started. For architectures without support for exact boot
time a new weak function is added that returns 0.  Use the exact boot
time to initialize wall_to_monotonic, or xtime if the read_boot_clock
returned 0.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Daniel Walker <dwalker@fifo99.com>
LKML-Reference: <20090814134811.296703241@de.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/s390/kernel/time.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index a94ec48587b..6bff1a1d906 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -187,6 +187,11 @@ void read_persistent_clock(struct timespec *ts)
 	tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, ts);
 }
 
+void read_boot_clock(struct timespec *ts)
+{
+	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, ts);
+}
+
 static cycle_t read_tod_clock(struct clocksource *cs)
 {
 	return get_clock();
@@ -243,9 +248,6 @@ void update_vsyscall_tz(void)
  */
 void __init time_init(void)
 {
-	struct timespec ts;
-	unsigned long flags;
-
 	/* Reset time synchronization interfaces. */
 	etr_reset();
 	stp_reset();
@@ -261,15 +263,6 @@ void __init time_init(void)
 	if (clocksource_register(&clocksource_tod) != 0)
 		panic("Could not register TOD clock source");
 
-	/*
-	 * Reset wall_to_monotonic to the initial timestamp created
-	 * in head.S to get a precise value in /proc/uptime.
-	 */
-	write_seqlock_irqsave(&xtime_lock, flags);
-	tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
-	set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-
 	/* Enable TOD clock interrupts on the boot cpu. */
 	init_cpu_timer();
 
-- 
cgit v1.2.3


From 3ef12c3c97603bad405d30c989718cc9405e2759 Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Fri, 14 Aug 2009 13:56:37 -0500
Subject: x86: Fix UV BAU destination subnode id

The SGI UV Broadcast Assist Unit is used to send TLB shootdown
messages to remote nodes of the system.  The header of the
message must contain the subnode id of the block in the
receiving hub that handles such messages.  It should always be
0x10, the id of the "LB" block.

It had previously been documented as a "must be zero" field.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <E1Mc1x7-0005Ce-6t@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uv/uv_bau.h | 2 +-
 arch/x86/kernel/tlb_uv.c         | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index bddd44f2f0a..80e2984f521 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -133,7 +133,7 @@ struct bau_msg_payload {
  * see table 4.2.3.0.1 in broacast_assist spec.
  */
 struct bau_msg_header {
-	unsigned int dest_subnodeid:6;	/* must be zero */
+	unsigned int dest_subnodeid:6;	/* must be 0x10, for the LB */
 	/* bits 5:0 */
 	unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
 	/* bits 20:6 */			  /* first bit in node_map */
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 8ccabb8a2f6..77b9689f8ed 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -744,6 +744,7 @@ uv_activation_descriptor_init(int node, int pnode)
 		 * note that base_dest_nodeid is actually a nasid.
 		 */
 		ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
+		ad2->header.dest_subnodeid = 0x10; /* the LB */
 		ad2->header.command = UV_NET_ENDPOINT_INTD;
 		ad2->header.int_both = 1;
 		/*
-- 
cgit v1.2.3


From dde5828f56cb2c1aa70365c476e6830482127258 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 15 Aug 2009 12:36:00 +0100
Subject: ARM: Fix broken highmem support

Currently, highmem is selectable, and you can request an increased
vmalloc area.  However, none of this has any effect on the memory
layout since a patch in the highmem series was accidentally dropped.
Moreover, even if you did want highmem, all memory would still be
registered as lowmem, possibly resulting in overflow of the available
virtual mapping space.

The highmem boundary is determined by the highest allowed beginning
of the vmalloc area, which depends on its configurable minimum size
(see commit 60296c71f6c5063e3c1f1d2619ca0b60940162e7 for details on
this).

We should create mappings and initialize bootmem only for low memory,
while the zone allocator must still be told about highmem.

Currently, memory nodes which are completely located in high memory
are not supported.  This is not a huge limitation since systems
relying on highmem support are unlikely to have discontiguous memory
with large holes.

[ A similar patch was meant to be merged before commit 5f0fbf9ecaf3
  and be available  in Linux v2.6.30, however some git rebase screw-up
  of mine dropped the first commit of the series, and that goofage
  escaped testing somehow as well. -- Nico ]

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/include/asm/setup.h |   3 +-
 arch/arm/mm/init.c           | 118 ++++++++++++++++++++++++++-----------------
 arch/arm/mm/mmu.c            |   9 +++-
 3 files changed, 83 insertions(+), 47 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index ee1304f22f9..5ccce0a9b03 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
 struct membank {
 	unsigned long start;
 	unsigned long size;
-	int           node;
+	unsigned short node;
+	unsigned short highmem;
 };
 
 struct meminfo {
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 8277802ec85..3a7279c1ce5 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -120,6 +120,32 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
+static void __init find_node_limits(int node, struct meminfo *mi,
+	unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+{
+	int i;
+
+	*min = -1UL;
+	*max_low = *max_high = 0;
+
+	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
+		unsigned long start, end;
+
+		start = bank_pfn_start(bank);
+		end = bank_pfn_end(bank);
+
+		if (*min > start)
+			*min = start;
+		if (*max_high < end)
+			*max_high = end;
+		if (bank->highmem)
+			continue;
+		if (*max_low < end)
+			*max_low = end;
+	}
+}
+
 /*
  * FIXME: We really want to avoid allocating the bootmap bitmap
  * over the top of the initrd.  Hopefully, this is located towards
@@ -210,40 +236,24 @@ static inline void map_memory_bank(struct membank *bank)
 #endif
 }
 
-static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
+static void __init bootmem_init_node(int node, struct meminfo *mi,
+	unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long start_pfn, end_pfn, boot_pfn;
+	unsigned long boot_pfn;
 	unsigned int boot_pages;
 	pg_data_t *pgdat;
 	int i;
 
-	start_pfn = -1UL;
-	end_pfn = 0;
-
 	/*
-	 * Calculate the pfn range, and map the memory banks for this node.
+	 * Map the memory banks for this node.
 	 */
 	for_each_nodebank(i, mi, node) {
 		struct membank *bank = &mi->bank[i];
-		unsigned long start, end;
 
-		start = bank_pfn_start(bank);
-		end = bank_pfn_end(bank);
-
-		if (start_pfn > start)
-			start_pfn = start;
-		if (end_pfn < end)
-			end_pfn = end;
-
-		map_memory_bank(bank);
+		if (!bank->highmem)
+			map_memory_bank(bank);
 	}
 
-	/*
-	 * If there is no memory in this node, ignore it.
-	 */
-	if (end_pfn == 0)
-		return end_pfn;
-
 	/*
 	 * Allocate the bootmem bitmap page.
 	 */
@@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
 
 	for_each_nodebank(i, mi, node) {
 		struct membank *bank = &mi->bank[i];
-		free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+		if (!bank->highmem)
+			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
 		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
 	}
 
@@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
 	 */
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-
-	return end_pfn;
 }
 
 static void __init bootmem_reserve_initrd(int node)
@@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node)
 static void __init bootmem_free_node(int node, struct meminfo *mi)
 {
 	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	unsigned long start_pfn, end_pfn;
-	pg_data_t *pgdat = NODE_DATA(node);
+	unsigned long min, max_low, max_high;
 	int i;
 
-	start_pfn = pgdat->bdata->node_min_pfn;
-	end_pfn = pgdat->bdata->node_low_pfn;
+	find_node_limits(node, mi, &min, &max_low, &max_high);
 
 	/*
 	 * initialise the zones within this node.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
-	memset(zhole_size, 0, sizeof(zhole_size));
 
 	/*
 	 * The size of this node has already been determined.  If we need
 	 * to do anything fancy with the allocation of this memory to the
 	 * zones, now is the time to do it.
 	 */
-	zone_size[0] = end_pfn - start_pfn;
+	zone_size[0] = max_low - min;
+#ifdef CONFIG_HIGHMEM
+	zone_size[ZONE_HIGHMEM] = max_high - max_low;
+#endif
 
 	/*
 	 * For each bank in this node, calculate the size of the holes.
 	 *  holes = node_size - sum(bank_sizes_in_node)
 	 */
-	zhole_size[0] = zone_size[0];
-	for_each_nodebank(i, mi, node)
-		zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
+	memcpy(zhole_size, zone_size, sizeof(zhole_size));
+	for_each_nodebank(i, mi, node) {
+		int idx = 0;
+#ifdef CONFIG_HIGHMEM
+		if (mi->bank[i].highmem)
+			idx = ZONE_HIGHMEM;
+#endif
+		zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
+	}
 
 	/*
 	 * Adjust the sizes according to any special requirements for
@@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	 */
 	arch_adjust_zones(node, zone_size, zhole_size);
 
-	free_area_init_node(node, zone_size, start_pfn, zhole_size);
+	free_area_init_node(node, zone_size, min, zhole_size);
 }
 
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
-	unsigned long memend_pfn = 0;
+	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
 	/*
@@ -345,11 +360,29 @@ void __init bootmem_init(void)
 	 */
 	initrd_node = check_initrd(mi);
 
+	max_low = max_high = 0;
+
 	/*
 	 * Run through each node initialising the bootmem allocator.
 	 */
 	for_each_node(node) {
-		unsigned long end_pfn = bootmem_init_node(node, mi);
+		unsigned long node_low, node_high;
+
+		find_node_limits(node, mi, &min, &node_low, &node_high);
+
+		if (node_low > max_low)
+			max_low = node_low;
+		if (node_high > max_high)
+			max_high = node_high;
+
+		/*
+		 * If there is no memory in this node, ignore it.
+		 * (We can't have nodes which have no lowmem)
+		 */
+		if (node_low == 0)
+			continue;
+
+		bootmem_init_node(node, mi, min, node_low);
 
 		/*
 		 * Reserve any special node zero regions.
@@ -362,12 +395,6 @@ void __init bootmem_init(void)
 		 */
 		if (node == initrd_node)
 			bootmem_reserve_initrd(node);
-
-		/*
-		 * Remember the highest memory PFN.
-		 */
-		if (end_pfn > memend_pfn)
-			memend_pfn = end_pfn;
 	}
 
 	/*
@@ -383,7 +410,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);
 
-	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
+	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any
@@ -393,7 +420,8 @@ void __init bootmem_init(void)
 	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
 	 * the system, not the maximum PFN.
 	 */
-	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+	max_low_pfn = max_low - PHYS_PFN_OFFSET;
+	max_pfn = max_high - PHYS_PFN_OFFSET;
 }
 
 static inline int free_area(unsigned long pfn, unsigned long end, char *s)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4722582b17b..4426ee67cec 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc);
 
 static void __init sanity_check_meminfo(void)
 {
-	int i, j;
+	int i, j, highmem = 0;
 
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
 #ifdef CONFIG_HIGHMEM
+		if (__va(bank->start) > VMALLOC_MIN ||
+		    __va(bank->start) < (void *)PAGE_OFFSET)
+			highmem = 1;
+
+		bank->highmem = highmem;
+
 		/*
 		 * Split those memory banks which are partially overlapping
 		 * the vmalloc area greatly simplifying things later.
@@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void)
 				i++;
 				bank[1].size -= VMALLOC_MIN - __va(bank->start);
 				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				bank[1].highmem = highmem = 1;
 				j++;
 			}
 			bank->size = VMALLOC_MIN - __va(bank->start);
-- 
cgit v1.2.3


From 369842658a36bcea28ecb643ba4bdb53919330dd Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sat, 15 Aug 2009 12:58:11 +0100
Subject: ARM: 5677/1: ARM support for
 TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait

This patch adds support for TIF_RESTORE_SIGMASK to ARM's
signal handling, which allows to hook up the pselect6, ppoll,
and epoll_pwait syscalls on ARM.

Tested here with eabi userspace and a test program with a
deliberate race between a child's exit and the parent's
sigprocmask/select sequence. Using sys_pselect6() instead
of sigprocmask/select reliably prevents the race.

The other arch's support for TIF_RESTORE_SIGMASK has evolved
over time:

In 2.6.16:
- add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING
- test both when checking for pending signal [changed later]
- reimplement sys_sigsuspend() to use current->saved_sigmask,
  TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND;
  ditto for sys_rt_sigsuspend(), but drop private code and
  use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND;
- there are now no "extra" calls to do_signal() so its oldset
  parameter is always &current->blocked so need not be passed,
  also its return value is changed to void
- change handle_signal() to return 0/-errno
- change do_signal() to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- hook up sys_pselect6() and sys_ppoll()

In 2.6.19:
- hook up sys_epoll_pwait()

In 2.6.26:
- allow archs to override how TIF_RESTORE_SIGMASK is implemented;
  default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and
  TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again
  when checking for pending signal work; some archs now implement
  TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit
- call set_restore_sigmask() in sys_sigsuspend() instead of setting
  TIF_RESTORE_SIGMASK

In 2.6.29-rc:
- kill sys_pselect7() which no arch wanted

So for 2.6.31-rc6/ARM this patch does the following:
- Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask()
  which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so
  TIF_RESTORE_SIGMASK need not claim one of the scarce low thread
  flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need
  not be extended for TIF_RESTORE_SIGMASK.
- sys_sigsuspend() is reimplemented to use current->saved_sigmask
  and set_restore_sigmask(), making it identical to most other archs
- The private code for sys_rt_sigsuspend() is removed, instead
  generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND.
- sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs
  parameter, so their assembly code wrappers are removed.
- handle_signal() is changed to return 0 on success or -errno.
- The oldset parameter to do_signal() is now redundant and removed,
  and the return value is now also redundant and changed to void.
- do_signal() is changed to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/thread_info.h |  2 +
 arch/arm/include/asm/unistd.h      |  7 ++--
 arch/arm/kernel/calls.S            | 10 ++---
 arch/arm/kernel/entry-common.S     | 10 -----
 arch/arm/kernel/signal.c           | 86 ++++++++++++++++----------------------
 5 files changed, 48 insertions(+), 67 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e50cbc..e20d80539b4 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18
 #define TIF_FREEZE		19
+#define TIF_RESTORE_SIGMASK	20
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8cb77d..9122c9ee18f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
 #define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
 #define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
 #define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-					/* 335 for pselect6 */
-					/* 336 for ppoll */
+#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
+#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
 #define __NR_unshare			(__NR_SYSCALL_BASE+337)
 #define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
 #define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
 #define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
 #define __NR_move_pages			(__NR_SYSCALL_BASE+344)
 #define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-					/* 346 for epoll_pwait */
+#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
 #define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
 #define __NR_utimensat			(__NR_SYSCALL_BASE+348)
 #define __NR_signalfd			(__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72a4cb..ecfa98954d1 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
 		CALL(sys_ni_syscall)		/* was sys_ssetmask */
 /* 70 */	CALL(sys_setreuid16)
 		CALL(sys_setregid16)
-		CALL(sys_sigsuspend_wrapper)
+		CALL(sys_sigsuspend)
 		CALL(sys_sigpending)
 		CALL(sys_sethostname)
 /* 75 */	CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
 		CALL(sys_rt_sigpending)
 		CALL(sys_rt_sigtimedwait)
 		CALL(sys_rt_sigqueueinfo)
-		CALL(sys_rt_sigsuspend_wrapper)
+		CALL(sys_rt_sigsuspend)
 /* 180 */	CALL(ABI(sys_pread64, sys_oabi_pread64))
 		CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
 		CALL(sys_chown16)
@@ -344,8 +344,8 @@
 		CALL(sys_readlinkat)
 		CALL(sys_fchmodat)
 		CALL(sys_faccessat)
-/* 335 */	CALL(sys_ni_syscall)		/* eventually pselect6 */
-		CALL(sys_ni_syscall)		/* eventually ppoll */
+/* 335 */	CALL(sys_pselect6)
+		CALL(sys_ppoll)
 		CALL(sys_unshare)
 		CALL(sys_set_robust_list)
 		CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
 		CALL(sys_vmsplice)
 		CALL(sys_move_pages)
 /* 345 */	CALL(sys_getcpu)
-		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
+		CALL(sys_epoll_pwait)
 		CALL(sys_kexec_load)
 		CALL(sys_utimensat)
 		CALL(sys_signalfd)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..bfa7f0af7ed 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -373,16 +373,6 @@ sys_clone_wrapper:
 		b	sys_clone
 ENDPROC(sys_clone_wrapper)
 
-sys_sigsuspend_wrapper:
-		add	r3, sp, #S_OFF
-		b	sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
-		add	r2, sp, #S_OFF
-		b	sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_sigreturn
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7e..e27ee1f701d 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
-	sigset_t saveset;
-
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	siginitset(&current->blocked, mask);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
-
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
 
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_restore_sigmask();
+	return -ERESTARTNOHAND;
 }
 
 asmlinkage int 
@@ -545,7 +510,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs)
 /*
  * OK, we're invoking a handler
  */	
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
 	      struct pt_regs * regs, int syscall)
@@ -596,7 +561,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 
 	if (ret != 0) {
 		force_sigsegv(sig, tsk);
-		return;
+		return ret;
 	}
 
 	/*
@@ -610,6 +575,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	recalc_sigpending();
 	spin_unlock_irq(&tsk->sighand->siglock);
 
+	return 0;
 }
 
 /*
@@ -621,7 +587,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
 {
 	struct k_sigaction ka;
 	siginfo_t info;
@@ -634,7 +600,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 0;
+		return;
 
 	if (try_to_freeze())
 		goto no_signal;
@@ -643,9 +609,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		handle_signal(signr, &ka, &info, oldset, regs, syscall);
+		sigset_t *oldset;
+
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			oldset = &current->saved_sigmask;
+		else
+			oldset = &current->blocked;
+		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 		single_step_set(current);
-		return 1;
+		return;
 	}
 
  no_signal:
@@ -697,14 +678,21 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
 			setup_syscall_restart(regs);
 		}
+
+		/* If there's no signal to deliver, we just put the saved sigmask
+		 * back.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+		}
 	}
 	single_step_set(current);
-	return 0;
 }
 
 asmlinkage void
 do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(&current->blocked, regs, syscall);
+		do_signal(regs, syscall);
 }
-- 
cgit v1.2.3


From 5ad73d07173e7b76c16bcb8b6cf64d8386019689 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 10 Aug 2009 12:51:56 +0100
Subject: ARM: 5665/1: U300 syscon register updates

This adds in a few new register and defines for improved padmux
support and some figures that were plain wrong on the targeted
U300 platforms.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/include/mach/syscon.h | 120 +++++++++++++++++++++++++++++--
 1 file changed, 113 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 1c90d1b1ccb..7444f5c7da9 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -240,8 +240,13 @@
 #define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
 #define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
 #define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_PMC1LR_CDI_CDI2				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO			(0xC000)
+#elif CONFIG_MACH_U300_BS365
 #define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
 #define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#endif
 #define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
 #define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
 #define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
@@ -345,19 +350,69 @@
 #define U300_SYSCON_MMCR_MASK					(0x0003)
 #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
 #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-
+/* Pull up/down control (R/W) */
+#define U300_SYSCON_PUCR					(0x104)
+#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE		(0x0200)
+#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE		(0x0100)
+#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE			(0x0080)
+#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE			(0x0040)
+#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK			(0x003F)
+/* Padmux 2 control */
+#define U300_SYSCON_PMC2R					(0x100)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MASK			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM			(0x0040)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MMC			(0x0080)
+#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MASK			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM			(0x0100)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MMC			(0x0200)
+#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MASK			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM			(0x0400)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MMC			(0x0800)
+#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MASK			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM			(0x1000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MMC			(0x2000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MASK			(0xC000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM			(0x4000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MMC			(0x8000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO			(0xC000)
 /* TODO: More SYSCON registers missing */
 #define U300_SYSCON_PMC3R					(0x10c)
 #define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
 #define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
-/* TODO: Missing other configs, I just added the SPI stuff */
-
+/* TODO: Missing other configs */
+#define U300_SYSCON_PMC4R					(0x168)
+#define U300_SYSCON_PMC4R_APP_MISC_12_MASK			(0x0003)
+#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_MASK			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_13_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA			(0x0004)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2			(0x0008)
+#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_14_MASK			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA			(0x0010)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2			(0x0020)
+#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_16_MASK			(0x0300)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13		(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS		(0x0100)
+#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N	(0x0200)
 /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
 #define U300_SYSCON_S0CCR					(0x120)
 #define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -375,6 +430,7 @@
 #define U300_SYSCON_S1CCR					(0x124)
 #define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -393,6 +449,7 @@
 #define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
 #define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
 #define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -425,6 +482,44 @@
 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
 #define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
 #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR					(0x0130)
+#define U300_SYSCON_PICR_MASK					(0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR					(0x0134)
+#define U300_SYSCON_PISR_MASK					(0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR					(0x0138)
+#define U300_SYSCON_PICLR_MASK					(0x000F)
+#define U300_SYSCON_PICLR_RWMASK				(0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
+/* CAMIF_CONTROL 16 bit (-/W) */
+#define U300_SYSCON_CICR					(0x013C)
+#define U300_SYSCON_CICR_MASK					(0x0FFF)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK		(0x0F00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1		(0x0C00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0		(0x0300)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK		(0x00F0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1		(0x00C0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0		(0x0030)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK		(0x000F)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1		(0x000C)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0		(0x0003)
 /* Clock activity observability register 0 */
 #define U300_SYSCON_C0OAR					(0x140)
 #define U300_SYSCON_C0OAR_MASK					(0xFFFF)
@@ -513,7 +608,7 @@
 /**
  * CPU medium frequency in MHz
  */
-#define SYSCON_CPU_CLOCK_MEDIUM  104
+#define SYSCON_CPU_CLOCK_MEDIUM   52
 /**
  * CPU low frequency in MHz
  */
@@ -527,7 +622,7 @@
 /**
  * EMIF medium frequency in MHz
  */
-#define SYSCON_EMIF_CLOCK_MEDIUM 104
+#define SYSCON_EMIF_CLOCK_MEDIUM  52
 /**
  * EMIF low frequency in MHz
  */
@@ -541,7 +636,7 @@
 /**
  * AHB medium frequency in MHz
  */
-#define SYSCON_AHB_CLOCK_MEDIUM   52
+#define SYSCON_AHB_CLOCK_MEDIUM   26
 /**
  * AHB low frequency in MHz
  */
@@ -553,6 +648,15 @@ enum syscon_busmaster {
   SYSCON_BM_VIDEO_ENC
 };
 
+/* Selectr a resistor or a set of resistors */
+enum syscon_pull_up_down {
+  SYSCON_PU_KEY_IN_EN,
+  SYSCON_PU_EMIF_1_8_BIT_EN,
+  SYSCON_PU_EMIF_1_16_BIT_EN,
+  SYSCON_PU_EMIF_1_NFIF_READY_EN,
+  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
+};
+
 /*
  * Note that this array must match the order of the array "clk_reg"
  * in syscon.c
@@ -575,6 +679,7 @@ enum syscon_clk {
   SYSCON_CLKCONTROL_SPI,
   SYSCON_CLKCONTROL_I2S0_CORE,
   SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_UART1,
   SYSCON_CLKCONTROL_AAIF,
   SYSCON_CLKCONTROL_AHB,
   SYSCON_CLKCONTROL_APEX,
@@ -604,7 +709,8 @@ enum syscon_sysclk_mode {
 
 enum syscon_sysclk_req {
   SYSCON_SYSCLKREQ_DISABLED,
-  SYSCON_SYSCLKREQ_ACTIVE_LOW
+  SYSCON_SYSCLKREQ_ACTIVE_LOW,
+  SYSCON_SYSCLKREQ_MONITOR
 };
 
 enum syscon_clk_mode {
-- 
cgit v1.2.3


From df1e0520f9434b5b771c854a13dd928727d8673a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 10 Aug 2009 12:52:40 +0100
Subject: ARM: 5666/1: Revamped U300 padmux API

This abstracts the hackish padmux API on the U300 platform into
something more manageable. It provides a way for drivers to
activate/deactivate a certain padmux setting. It will also switch
the users of the old API over to using the new style, pushing
muxing into the apropriate setup files.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/gpio.c   |  13 --
 arch/arm/mach-u300/mmc.c    |  16 ++
 arch/arm/mach-u300/padmux.c | 395 +++++++++++++++++++++++++++++++++++++++-----
 arch/arm/mach-u300/padmux.h |  28 +++-
 4 files changed, 392 insertions(+), 60 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 308cdb197a9..63c8f27fb15 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -25,11 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-/* Need access to SYSCON registers for PADmuxing */
-#include <mach/syscon.h>
-
-#include "padmux.h"
-
 /* Reference to GPIO block clock */
 static struct clk *clk;
 
@@ -606,14 +601,6 @@ static int __init gpio_probe(struct platform_device *pdev)
 	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
 #endif
 
-	/* Set up some padmuxing here */
-#ifdef CONFIG_MMC
-	pmx_set_mission_mode_mmc();
-#endif
-#ifdef CONFIG_SPI_PL022
-	pmx_set_mission_mode_spi();
-#endif
-
 	gpio_set_initial_values();
 
 	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9..e66284d7356 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -22,6 +22,7 @@
 
 #include <asm/mach/mmc.h>
 #include "mmc.h"
+#include "padmux.h"
 
 struct mmci_card_event {
 	struct input_dev *mmc_input;
@@ -146,6 +147,7 @@ int __devinit mmc_init(struct amba_device *adev)
 {
 	struct mmci_card_event *mmci_card;
 	struct device *mmcsd_device = &adev->dev;
+	struct pmx *pmx;
 	int ret = 0;
 
 	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
@@ -205,6 +207,20 @@ int __devinit mmc_init(struct amba_device *adev)
 
 	input_set_drvdata(mmci_card->mmc_input, mmci_card);
 
+	/*
+	 * Setup padmuxing for MMC. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
+
+	if (IS_ERR(pmx))
+		pr_warning("Could not get padmux handle\n");
+	else {
+		ret = pmx_activate(mmcsd_device, pmx);
+		if (IS_ERR_VALUE(ret))
+			pr_warning("Could not activate padmuxing\n");
+	}
+
 	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
 				     mmci_card);
 
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
index f3664564f08..4c93c6cefd3 100644
--- a/arch/arm/mach-u300/padmux.c
+++ b/arch/arm/mach-u300/padmux.c
@@ -6,53 +6,362 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
-#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <mach/u300-regs.h>
 #include <mach/syscon.h>
-
 #include "padmux.h"
 
-/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
-void pmx_set_mission_mode_mmc(void)
-{
-	u16 val;
-
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-}
-
-void pmx_set_mission_mode_spi(void)
-{
-	u16 val;
-
-	/* Set up padmuxing so the SPI port and its chipselects are active */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	/*
-	 * Activate the SPI port (disable the use of these pins for generic
-	 * GPIO, DSP, AAIF
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
-	/*
-	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
-	/*
-	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+static DEFINE_MUTEX(pmx_mutex);
+
+const u32 pmx_registers[] = {
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
+};
+
+/* High level functionality */
+
+/* Lazy dog:
+ * onmask = {
+ *   {"PMC1LR" mask, "PMC1LR" value},
+ *   {"PMC1HR" mask, "PMC1HR" value},
+ *   {"PMC2R"  mask, "PMC2R"  value},
+ *   {"PMC3R"  mask, "PMC3R"  value},
+ *   {"PMC4R"  mask, "PMC4R"  value}
+ * }
+ */
+static struct pmx mmc_setting = {
+	.setting = U300_APP_PMX_MMC_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "MMC",
+	.onmask = {
+		   {U300_SYSCON_PMC1LR_MMCSD_MASK,
+		    U300_SYSCON_PMC1LR_MMCSD_MMCSD},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0},
+		   {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
+		    U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
+		   },
+};
+
+static struct pmx spi_setting = {
+	.setting = U300_APP_PMX_SPI_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "SPI",
+	.onmask = {{0, 0},
+		   {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
+		    U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0}
+		   },
+};
+
+/* Available padmux settings */
+static struct pmx *pmx_settings[] = {
+	&mmc_setting,
+	&spi_setting,
+};
+
+static void update_registers(struct pmx *pmx, bool activate)
+{
+	u16 regval, val, mask;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
+		if (activate)
+			val = pmx->onmask[i].val;
+		else
+			val = 0;
+
+		mask = pmx->onmask[i].mask;
+		if (mask != 0) {
+			regval = readw(pmx_registers[i]);
+			regval &= ~mask;
+			regval |= val;
+			writew(regval, pmx_registers[i]);
+		}
+	}
+}
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
+{
+	int i;
+	struct pmx *pmx = ERR_PTR(-ENOENT);
+
+	if (dev == NULL)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (setting == pmx_settings[i]->setting) {
+
+			if (pmx_settings[i]->dev != NULL) {
+				WARN(1, "padmux: required setting "
+				     "in use by another consumer\n");
+			} else {
+				pmx = pmx_settings[i];
+				pmx->dev = dev;
+				dev_dbg(dev, "padmux: setting nr %d is now "
+					"bound to %s and ready to use\n",
+					setting, dev_name(dev));
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return pmx;
+}
+EXPORT_SYMBOL(pmx_get);
+
+int pmx_put(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot release handle as "
+					"it is bound to another consumer\n");
+				ret = -EINVAL;
+				break;
+			} else {
+				pmx_settings[i]->dev = NULL;
+				ret = 0;
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_put);
+
+int pmx_activate(struct device *dev, struct pmx *pmx)
+{
+	int i, j, ret;
+	ret = 0;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+
+	/* Make sure the required bits are not used */
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			if (pmx_settings[i]->onmask[j].mask & pmx->
+				onmask[j].mask) {
+				/* More than one entry on the same bits */
+				WARN(1, "padmux: cannot activate "
+					"setting. Bit conflict with "
+					"an active setting\n");
+
+				ret = -EUSERS;
+				goto exit;
+			}
+		}
+	}
+	update_registers(pmx, true);
+	pmx->activated = true;
+	dev_dbg(dev, "padmux: setting nr %d is activated\n",
+		pmx->setting);
+
+exit:
+	mutex_unlock(&pmx_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(pmx_activate);
+
+int pmx_deactivate(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL)
+			continue;
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot deactivate "
+				     "pmx setting as it was activated "
+				     "by another consumer\n");
+
+				ret = -EBUSY;
+				continue;
+			} else {
+				update_registers(pmx, false);
+				pmx_settings[i]->dev = NULL;
+				pmx->activated = false;
+				ret = 0;
+				dev_dbg(dev, "padmux: setting nr %d is deactivated",
+					pmx->setting);
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_deactivate);
+
+/*
+ * For internal use only. If it is to be exported,
+ * it should be reentrant. Notice that pmx_activate
+ * (i.e. runtime settings) always override default settings.
+ */
+static int pmx_set_default(void)
+{
+	/* Used to identify several entries on the same bits */
+	u16 modbits[ARRAY_SIZE(pmx_registers)];
+
+	int i, j;
+
+	memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
+
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (!pmx_settings[i]->default_on)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			/* Make sure there is only one entry on the same bits */
+			if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
+				BUG();
+				return -EUSERS;
+			}
+			modbits[j] |= pmx_settings[i]->onmask[j].mask;
+		}
+		update_registers(pmx_settings[i], true);
+	}
+	return 0;
 }
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+static int pmx_show(struct seq_file *s, void *data)
+{
+	int i;
+	seq_printf(s, "-------------------------------------------------\n");
+	seq_printf(s, "SETTING     BOUND TO DEVICE               STATE\n");
+	seq_printf(s, "-------------------------------------------------\n");
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+		/* Format pmx and device name nicely */
+		char cdp[33];
+		int chars;
+
+		chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
+		while (chars < 16) {
+			cdp[chars] = ' ';
+			chars++;
+		}
+		chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
+				dev_name(pmx_settings[i]->dev) : "N/A");
+		while (chars < 16) {
+			cdp[chars+16] = ' ';
+			chars++;
+		}
+		cdp[32] = '\0';
+
+		seq_printf(s,
+			"%s\t%s\n",
+			&cdp[0],
+			pmx_settings[i]->activated ?
+			"ACTIVATED" : "DEACTIVATED"
+			);
+
+	}
+	mutex_unlock(&pmx_mutex);
+	return 0;
+}
+
+static int pmx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmx_show, NULL);
+}
+
+static const struct file_operations pmx_operations = {
+	.owner		= THIS_MODULE,
+	.open		= pmx_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init init_pmx_read_debugfs(void)
+{
+	/* Expose a simple debugfs interface to view pmx settings */
+	(void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
+				   NULL, NULL,
+				   &pmx_operations);
+	return 0;
+}
+
+/*
+ * This needs to come in after the core_initcall(),
+ * because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_pmx_read_debugfs);
+#endif
+
+static int __init pmx_init(void)
+{
+	int ret;
+
+	ret = pmx_set_default();
+
+	if (IS_ERR_VALUE(ret))
+		pr_crit("padmux: default settings could not be set\n");
+
+	return 0;
+}
+
+/* Should be initialized before consumers */
+core_initcall(pmx_init);
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
index 8c2099ac504..6e8b8606409 100644
--- a/arch/arm/mach-u300/padmux.h
+++ b/arch/arm/mach-u300/padmux.h
@@ -6,14 +6,34 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX API
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
 
 #ifndef __MACH_U300_PADMUX_H
 #define __MACH_U300_PADMUX_H
 
-void pmx_set_mission_mode_mmc(void);
-void pmx_set_mission_mode_spi(void);
+enum pmx_settings {
+	U300_APP_PMX_MMC_SETTING,
+	U300_APP_PMX_SPI_SETTING
+};
+
+struct pmx_onmask {
+	u16 mask;		/* Mask bits */
+	u16 val;		/* Value when active */
+};
+
+struct pmx {
+	struct device *dev;
+	enum pmx_settings setting;
+	char *name;
+	bool activated;
+	bool default_on;
+	struct pmx_onmask onmask[];
+};
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
+int pmx_put(struct device *dev, struct pmx *pmx);
+int pmx_activate(struct device *dev, struct pmx *pmx);
+int pmx_deactivate(struct device *dev, struct pmx *pmx);
 
 #endif
-- 
cgit v1.2.3


From c7c8c78fdf6e9bd65d8ee879115dc2cd5d9fd0dc Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Fri, 14 Aug 2009 10:59:05 +0100
Subject: ARM: 5667/3: U300 SSP/SPI board setup and test

This adds a U300 board configuration for the PL022 SSP/SPI
PrimeCell driver recently merged to the 2.6.31-rc series.
Further it adds a dummy loopback SPI chip that can be used
for testing the SPI functionality on a running system using
the loopback mode of PL022.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/Kconfig        |  12 ++
 arch/arm/mach-u300/Makefile       |   2 +
 arch/arm/mach-u300/core.c         |   6 +
 arch/arm/mach-u300/dummyspichip.c | 290 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-u300/spi.c          | 124 ++++++++++++++++
 arch/arm/mach-u300/spi.h          |  26 ++++
 6 files changed, 460 insertions(+)
 create mode 100644 arch/arm/mach-u300/dummyspichip.c
 create mode 100644 arch/arm/mach-u300/spi.c
 create mode 100644 arch/arm/mach-u300/spi.h

(limited to 'arch')

diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 337b9aabce4..801b21e7f67 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -81,6 +81,18 @@ config MACH_U300_SEMI_IS_SHARED
 		Memory Interface) from both from access and application
 		side.
 
+config MACH_U300_SPIDUMMY
+	bool "SSP/SPI dummy chip"
+	select SPI
+	select SPI_MASTER
+	select SPI_PL022
+	help
+		This creates a small kernel module that creates a dummy
+		SPI device to be used for loopback tests. Regularly used
+		to test reference designs. If you're not testing SPI,
+		you don't need it. Selecting this will activate the
+		SPI framework and ARM PL022 support.
+
 comment "All the settings below must match the bootloader's settings"
 
 config MACH_U300_ACCESS_MEM_SIZE
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 24950e0df4b..4941f89ea79 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -9,3 +9,5 @@ obj-		:=
 
 obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_MMC)                 += mmc.o
+obj-$(CONFIG_SPI_PL022)           += spi.o
+obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 89b3ccf35e1..38d08a1c25d 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -32,6 +32,7 @@
 
 #include "clock.h"
 #include "mmc.h"
+#include "spi.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -611,6 +612,8 @@ void __init u300_init_devices(void)
 	/* Wait for the PLL208 to lock if not locked in yet */
 	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
 		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+	/* Initialize SPI device with some board specifics */
+	u300_spi_init(&pl022_device);
 
 	/* Register the AMBA devices in the AMBA bus abstraction layer */
 	u300_clock_primecells();
@@ -622,6 +625,9 @@ void __init u300_init_devices(void)
 
 	u300_assign_physmem();
 
+	/* Register subdevices on the SPI bus */
+	u300_spi_register_board_devices();
+
 	/* Register the platform devices */
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
new file mode 100644
index 00000000000..962f9de454d
--- /dev/null
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -0,0 +1,290 @@
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+	struct device *dev;
+	struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	/*
+	 * WARNING! Do not dereference the chip-specific data in any normal
+	 * driver for a chip. It is usually STATIC and shall not be read
+	 * or written to. Your chip driver should NOT depend on fields in this
+	 * struct, this is just used here to alter the behaviour of the chip
+	 * in order to perform tests.
+	 */
+	struct pl022_config_chip *chip_info = spi->controller_data;
+	int status;
+	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+			0xF0, 0x0D};
+	u8 rxbuf[14];
+	u8 *bigtxbuf_virtual;
+	u8 *bigrxbuf_virtual;
+
+	if (mutex_lock_interruptible(&p_dummy->lock))
+		return -ERESTARTSYS;
+
+	bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+	if (bigtxbuf_virtual == NULL) {
+		status = -ENOMEM;
+		goto out;
+	}
+	bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+	/* Fill TXBUF with some happy pattern */
+	memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+	/*
+	 * Force chip to 8 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_8;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	/* Now run the tests for 8bit mode */
+	pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+		"in 8bit mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status < 0)
+		pr_warning("Siple test 1: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 1: SUCCESS!\n");
+
+	pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+		"in 8bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 2: SUCCESS!\n");
+
+	pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+		"in 8bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 3: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 3: SUCCESS!\n");
+
+	pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+		"bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+	pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+		"14 bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5: SUCCESS!\n");
+
+	pr_info("Simple test 6: write %d bytes with spi_write(), "
+		"read %d bytes garbage with spi_read() in 8bit mode\n",
+		DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6 step 1: SUCCESS!\n");
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6: SUCCESS!\n");
+
+
+	/*
+	 * Force chip to 16 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_16;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+		"in 16bit bus mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status == -EIO)
+		pr_info("Simple test 7: SUCCESS! (expected failure with "
+			"status EIO)\n");
+	else if (status < 0)
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "succeeded but it was expected to fail!\n");
+
+	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+		"in 16bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 8: SUCCESS!\n");
+
+	pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+		"in 16bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 9: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 9: SUCCESS!\n");
+
+	pr_info("Simple test 10: write %d bytes with spi_write(), "
+	       "read %d bytes garbage with spi_read() in 16bit mode\n",
+	       DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10: SUCCESS!\n");
+
+	status = sprintf(buf, "loop test complete\n");
+	kfree(bigrxbuf_virtual);
+	kfree(bigtxbuf_virtual);
+ out:
+	mutex_unlock(&p_dummy->lock);
+	return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int __devinit pl022_dummy_probe(struct spi_device *spi)
+{
+	struct dummy *p_dummy;
+	int status;
+
+	dev_info(&spi->dev, "probing dummy SPI device\n");
+
+	p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+	if (!p_dummy)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, p_dummy);
+	mutex_init(&p_dummy->lock);
+
+	/* sysfs hook */
+	status = device_create_file(&spi->dev, &dev_attr_looptest);
+	if (status) {
+		dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+		goto out_dev_create_looptest_failed;
+	}
+
+	return 0;
+
+out_dev_create_looptest_failed:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+	return status;
+}
+
+static int __devexit pl022_dummy_remove(struct spi_device *spi)
+{
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	dev_info(&spi->dev, "removing dummy SPI device\n");
+	device_remove_file(&spi->dev, &dev_attr_looptest);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+
+	return 0;
+}
+
+static struct spi_driver pl022_dummy_driver = {
+	.driver = {
+		.name	= "spi-dummy",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= pl022_dummy_probe,
+	.remove	= __devexit_p(pl022_dummy_remove),
+};
+
+static int __init pl022_init_dummy(void)
+{
+	return spi_register_driver(&pl022_dummy_driver);
+}
+
+static void __exit pl022_exit_dummy(void)
+{
+	spi_unregister_driver(&pl022_dummy_driver);
+}
+
+module_init(pl022_init_dummy);
+module_exit(pl022_exit_dummy);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
new file mode 100644
index 00000000000..307d007ea7f
--- /dev/null
+++ b/arch/arm/mach-u300/spi.c
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/mach-u300/spi.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/spi/spi.h>
+#include <linux/amba/pl022.h>
+#include <linux/err.h>
+#include "padmux.h"
+
+/*
+ * The following is for the actual devices on the SSP/SPI bus
+ */
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+static void select_dummy_chip(u32 chipselect)
+{
+	pr_debug("CORE: %s called with CS=0x%x (%s)\n",
+		 __func__,
+		 chipselect,
+		 chipselect ? "unselect chip" : "select chip");
+	/*
+	 * Here you would write the chip select value to the GPIO pins if
+	 * this was a real chip (but this is a loopback dummy).
+	 */
+}
+
+struct pl022_config_chip dummy_chip_info = {
+	/* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
+	.lbm = LOOPBACK_ENABLED,
+	/*
+	 * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
+	 * DMA_TRANSFER does not work
+	 */
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* We can only act as master but SSP_SLAVE is possible in theory */
+	.hierarchy = SSP_MASTER,
+	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
+	.slave_tx_disable = 0,
+	/* LSB first */
+	.endian_tx = SSP_TX_LSB,
+	.endian_rx = SSP_RX_LSB,
+	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_FALLING_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_LOW,
+	.ctrl_len = SSP_BITS_12,
+	.wait_state = SSP_MWIRE_WAIT_ZERO,
+	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	/*
+	 * This is where you insert a call to a function to enable CS
+	 * (usually GPIO) for a certain chip.
+	 */
+	.cs_control = select_dummy_chip,
+};
+#endif
+
+static struct spi_board_info u300_spi_devices[] = {
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+	{
+		/* A dummy chip used for loopback tests */
+		.modalias       = "spi-dummy",
+		/* Really dummy, pass in additional chip config here */
+		.platform_data  = NULL,
+		/* This defines how the controller shall handle the device */
+		.controller_data = &dummy_chip_info,
+		/* .irq - no external IRQ routed from this device */
+		.max_speed_hz   = 1000000,
+		.bus_num        = 0, /* Only one bus on this chip */
+		.chip_select    = 0,
+		/* Means SPI_CS_HIGH, change if e.g low CS */
+		.mode           = 0,
+	},
+#endif
+};
+
+static struct pl022_ssp_controller ssp_platform_data = {
+	/* If you have several SPI buses this varies, we have only bus 0 */
+	.bus_id = 0,
+	/* Set this to 1 when we think we got DMA working */
+	.enable_dma = 0,
+	/*
+	 * On the APP CPU GPIO 4, 5 and 6 are connected as generic
+	 * chip selects for SPI. (Same on U330, U335 and U365.)
+	 * TODO: make sure the GPIO driver can select these properly
+	 * and do padmuxing accordingly too.
+	 */
+	.num_chipselect = 3,
+};
+
+
+void __init u300_spi_init(struct amba_device *adev)
+{
+	struct pmx *pmx;
+
+	adev->dev.platform_data = &ssp_platform_data;
+	/*
+	 * Setup padmuxing for SPI. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
+
+	if (IS_ERR(pmx))
+		dev_warn(&adev->dev, "Could not get padmux handle\n");
+	else {
+		int ret;
+
+		ret = pmx_activate(&adev->dev, pmx);
+		if (IS_ERR_VALUE(ret))
+			dev_warn(&adev->dev, "Could not activate padmuxing\n");
+	}
+
+}
+void __init u300_spi_register_board_devices(void)
+{
+	/* Register any SPI devices */
+	spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
+}
diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h
new file mode 100644
index 00000000000..bd3d867e240
--- /dev/null
+++ b/arch/arm/mach-u300/spi.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-u300/spi.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef SPI_H
+#define SPI_H
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_SPI_PL022
+void __init u300_spi_init(struct amba_device *adev);
+void __init u300_spi_register_board_devices(void);
+#else
+/* Compile out SPI support if PL022 is not selected */
+static inline void __init u300_spi_init(struct amba_device *adev)
+{
+}
+static inline void __init u300_spi_register_board_devices(void)
+{
+}
+#endif
+
+#endif
-- 
cgit v1.2.3


From 6be2a0cacc1ed6899a53172e2e9b7a3587be0bea Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 13 Aug 2009 21:42:01 +0100
Subject: ARM: 5668/2: U300 I2C board setup

This sets up the U300 I2C subdevices so that the AB3100
analog baseband ASIC is properly detected and also the
camera devices in the U335 reference design get properly
registered.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/Makefile |  1 +
 arch/arm/mach-u300/core.c   |  8 ++++++--
 arch/arm/mach-u300/i2c.c    | 43 +++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-u300/i2c.h    | 23 +++++++++++++++++++++++
 4 files changed, 73 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-u300/i2c.c
 create mode 100644 arch/arm/mach-u300/i2c.h

(limited to 'arch')

diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 4941f89ea79..885b5c027c1 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_MMC)                 += mmc.o
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
+obj-$(CONFIG_I2C_STU300)          += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 38d08a1c25d..bad1ba228cb 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -33,6 +33,7 @@
 #include "clock.h"
 #include "mmc.h"
 #include "spi.h"
+#include "i2c.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -379,14 +380,14 @@ static struct platform_device wdog_device = {
 };
 
 static struct platform_device i2c0_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(i2c0_resources),
 	.resource = i2c0_resources,
 };
 
 static struct platform_device i2c1_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(i2c1_resources),
 	.resource = i2c1_resources,
@@ -625,6 +626,9 @@ void __init u300_init_devices(void)
 
 	u300_assign_physmem();
 
+	/* Register subdevices on the I2C buses */
+	u300_i2c_register_board_devices();
+
 	/* Register subdevices on the SPI bus */
 	u300_spi_register_board_devices();
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
new file mode 100644
index 00000000000..10be1f888b2
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.c
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-u300/i2c.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <mach/irqs.h>
+
+static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+	{
+		.type = "ab3100",
+		.addr = 0x48,
+		.irq = IRQ_U300_IRQ0_EXT,
+	},
+};
+
+static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.type = "fwcam",
+		.addr = 0x10,
+	},
+	{
+		.type = "fwcam",
+		.addr = 0x5d,
+	},
+#else
+	{ },
+#endif
+};
+
+void __init u300_i2c_register_board_devices(void)
+{
+	i2c_register_board_info(0, bus0_i2c_board_info,
+				ARRAY_SIZE(bus0_i2c_board_info));
+	i2c_register_board_info(1, bus1_i2c_board_info,
+				ARRAY_SIZE(bus1_i2c_board_info));
+}
diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h
new file mode 100644
index 00000000000..485c02e5c06
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-u300/i2c.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef MACH_U300_I2C_H
+#define MACH_U300_I2C_H
+
+#ifdef CONFIG_I2C_STU300
+void __init u300_i2c_register_board_devices(void);
+#else
+/* Compile out this stuff if no I2C adapter is available */
+static inline void __init u300_i2c_register_board_devices(void)
+{
+}
+#endif
+
+#endif
-- 
cgit v1.2.3


From a2bb9f4d6a5a589b481595207ac3588cc08d1b60 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 13 Aug 2009 21:57:22 +0100
Subject: ARM: 5673/1: U300 fix initsection compile warning

The u300_init_check_chip() function was not properly tagged with
the __init macro and provided a initsection mismatch on
compilation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 7936085dd75..2e9b8ccd8ec 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = {
 	}
 };
 
-static void u300_init_check_chip(void)
+static void __init u300_init_check_chip(void)
 {
 
 	u16 val;
-- 
cgit v1.2.3


From 58b5369e6eb6c889b540a99aa95562a66b25acf1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:36:44 +0100
Subject: ARM: 5674/1: Add clocksource/clockevent support for w90p910 platform

Add clocksource/clockevent support for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                |   2 +
 arch/arm/mach-w90x900/clock.c   |   6 ++
 arch/arm/mach-w90x900/time.c    | 151 +++++++++++++++++++++++++++++++++-------
 arch/arm/mach-w90x900/w90p910.c |   2 +
 4 files changed, 137 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c3fed1ee730..8c4f03d3412 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -495,6 +495,8 @@ config ARCH_W90X900
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
 		can login www.mcuos.com or www.nuvoton.com to know more.
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 49cf1fbc14e..70b67109637 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -55,6 +55,12 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
 void w90x900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f6b39..5e06770e601 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
  * All rights reserved.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT	0x1f
+#define PERIOD		(0x01 << 27)
+#define ONESHOT		(0x00 << 27)
+#define COUNTEN		(0x01 << 30)
+#define INTEN		(0x01 << 29)
+
+#define TICKS_PER_SEC	100
+#define PRESCALE	0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+		struct clock_event_device *clk)
 {
+	unsigned int val;
+
+	val = __raw_readl(REG_TCSR0);
+	val &= ~(0x03 << 27);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writel(timer0_load, REG_TICR0);
+		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+
+	__raw_writel(val, REG_TCSR0);
+}
+
+static int w90p910_clockevent_setnextevent(unsigned long evt,
+		struct clock_event_device *clk)
+{
+	unsigned int val;
+
+	__raw_writel(evt, REG_TICR0);
+
+	val = __raw_readl(REG_TCSR0);
+	val |= (COUNTEN | INTEN | PRESCALE);
+	__raw_writel(val, REG_TCSR0);
+
 	return 0;
 }
 
+static struct clock_event_device w90p910_clockevent_device = {
+	.name		= "w90p910-timer0",
+	.shift		= 32,
+	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= w90p910_clockevent_setmode,
+	.set_next_event	= w90p910_clockevent_setnextevent,
+	.rating		= 300,
+};
+
 /*IRQ handler for the timer*/
 
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &w90p910_clockevent_device;
+
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90x900_timer_irq = {
-	.name		= "w90x900 Timer Tick",
+static struct irqaction w90p910_timer0_irq = {
+	.name		= "w90p910-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90x900_timer_interrupt,
+	.handler	= w90p910_timer0_interrupt,
 };
 
-/*Set up timer reg.*/
+static void __init w90p910_clockevents_init(unsigned int rate)
+{
+	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					w90p910_clockevent_device.shift);
+	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.cpumask = cpumask_of(0);
 
-static void w90x900_timer_setup(void)
+	clockevents_register_device(&w90p910_clockevent_device);
+}
+
+static cycle_t w90p910_get_cycles(struct clocksource *cs)
 {
-	__raw_writel(0, REG_TCSR0);
-	__raw_writel(0, REG_TCSR1);
-	__raw_writel(0, REG_TCSR2);
-	__raw_writel(0, REG_TCSR3);
-	__raw_writel(0, REG_TCSR4);
-	__raw_writel(0x1F, REG_TISR);
-	__raw_writel(15000000/(100 * 100), REG_TICR0);
-	__raw_writel(0x68000063, REG_TCSR0);
+	return ~__raw_readl(REG_TDR1);
 }
 
-static void __init w90x900_timer_init(void)
+static struct clocksource clocksource_w90p910 = {
+	.name	= "w90p910-timer1",
+	.rating	= 200,
+	.read	= w90p910_get_cycles,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 20,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init w90p910_clocksource_init(unsigned int rate)
 {
-	w90x900_timer_setup();
-	setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+	unsigned int val;
+
+	__raw_writel(0xffffffff, REG_TICR1);
+
+	val = __raw_readl(REG_TCSR1);
+	val |= (COUNTEN | PERIOD);
+	__raw_writel(val, REG_TCSR1);
+
+	clocksource_w90p910.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
+	clocksource_register(&clocksource_w90p910);
+}
+
+static void __init w90p910_timer_init(void)
+{
+	struct clk *ck_ext = clk_get(NULL, "ext");
+	unsigned int	rate;
+
+	BUG_ON(IS_ERR(ck_ext));
+
+	rate = clk_get_rate(ck_ext);
+	clk_put(ck_ext);
+	rate = rate / (PRESCALE + 0x01);
+
+	 /* set a known state */
+	__raw_writel(0x00, REG_TCSR0);
+	__raw_writel(0x00, REG_TCSR1);
+	__raw_writel(RESETINT, REG_TISR);
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+
+	w90p910_clocksource_init(rate);
+	w90p910_clockevents_init(rate);
 }
 
 struct sys_timer w90x900_timer = {
-	.init		= w90x900_timer_init,
-	.offset		= w90x900_gettimeoffset,
-	.resume		= w90x900_timer_setup
+	.init		= w90p910_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 8444eababaa..d33723b69d1 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -76,6 +76,7 @@ static DEFINE_CLK(wdt, 26);
 static DEFINE_CLK(gdma, 27);
 static DEFINE_CLK(adc, 28);
 static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
 
 static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
@@ -97,6 +98,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
 	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 };
 
 /* Initial serial platform data */
-- 
cgit v1.2.3


From f346becf2fdba4d9dc023d28bc9a28f74dc9e4ac Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:37:42 +0100
Subject: ARM: 5675/1: The semaphore is used as mutex so make it a mutex
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The semaphore is used as mutex so make it a mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index e11a32b6856..4533098a0ee 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -40,7 +40,7 @@
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 
-static DECLARE_MUTEX(mfp_sem);
+static DEFINE_MUTEX(mfp_mutex);
 
 void mfp_set_groupf(struct device *dev)
 {
@@ -49,7 +49,7 @@ void mfp_set_groupf(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -62,7 +62,7 @@ void mfp_set_groupf(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupf);
 
@@ -73,7 +73,7 @@ void mfp_set_groupc(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -92,7 +92,7 @@ void mfp_set_groupc(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
@@ -103,7 +103,7 @@ void mfp_set_groupi(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -120,7 +120,7 @@ void mfp_set_groupi(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
@@ -131,7 +131,7 @@ void mfp_set_groupg(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -152,7 +152,7 @@ void mfp_set_groupg(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
-- 
cgit v1.2.3


From a8bc4eadd936bbad9e99b89fe692679451ad75c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:38:29 +0100
Subject: ARM: 5676/1: Provide more useful introduction for w90x900

Provide more useful introduction for w90x900

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8c4f03d3412..aad0add99a5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -498,8 +498,13 @@ config ARCH_W90X900
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
+	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+	  At present, the w90x900 has been renamed nuc900, regarding
+	  the ARM series product line, you can login the following
+	  link address to know more.
+
+	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
-- 
cgit v1.2.3


From 4663712cc745324a216112a72c744bb2b8f6658b Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:56:19 +0100
Subject: ARM: 5643/1: bcmring: arch.c and header files

add arch.c in mach-bcmring
add related header files in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/arch.c                       | 157 +++++++++++++++++++++
 arch/arm/mach-bcmring/core.h                       |  30 ++++
 arch/arm/mach-bcmring/include/cfg_global.h         |  13 ++
 arch/arm/mach-bcmring/include/cfg_global_defines.h |  40 ++++++
 arch/arm/mach-bcmring/include/mach/hardware.h      |  60 ++++++++
 arch/arm/mach-bcmring/include/mach/system.h        |  54 +++++++
 6 files changed, 354 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/arch.c
 create mode 100644 arch/arm/mach-bcmring/core.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global_defines.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/hardware.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/system.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 00000000000..0da693b0f7e
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM               1
+#define CTL_BCM_REBOOT                 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+	{
+	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+	 .procname = "warm",
+	 .data = &bcmring_arch_warm_reboot,
+	 .maxlen = sizeof(int),
+	 .mode = 0644,
+	 .proc_handler = &proc_dointvec},
+	{}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+	{
+	 .ctl_name = CTL_BCM_REBOOT,
+	 .procname = "reboot",
+	 .mode = 0555,
+	 .child = bcmring_sysctl_warm_reboot},
+	{}
+};
+
+static struct platform_device nand_device = {
+	.name = "bcm-nand",
+	.id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nand_device,
+};
+
+/****************************************************************************
+*
+*   Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+*   The customize_machine function is tagged as an arch_initcall
+*   (see include/linux/init.h for the order that the various init sections
+*   are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+	/* Enable spread spectrum */
+	chipcHw_enableSpreadSpectrum();
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	bcmring_amba_init();
+
+	dma_init();
+}
+
+/****************************************************************************
+*
+*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+*   passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+     struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+	printk(KERN_NOTICE "bcmring_fixup\n");
+	t->hdr.tag = ATAG_CORE;
+	t->hdr.size = tag_size(tag_core);
+	t->u.core.flags = 0;
+	t->u.core.pagesize = PAGE_SIZE;
+	t->u.core.rootdev = 31 << 8 | 0;
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_MEM;
+	t->hdr.size = tag_size(tag_mem32);
+	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+*   Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+	/* Maintainer: Broadcom Corporation */
+	.phys_io = MM_IO_START,
+	.io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+	.fixup = bcmring_fixup,
+	.map_io = bcmring_map_io,
+	.init_irq = bcmring_init_irq,
+	.timer = &bcmring_timer,
+	.init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 00000000000..b197ba48e36
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 00000000000..f01da877148
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP                         BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV                     0xB0
+#define CFG_GLOBAL_RAM_SIZE                     0x10000000
+#define CFG_GLOBAL_RAM_BASE                     0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 00000000000..b5beb0b3073
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107   10
+#define BCM11109   11
+#define BCM11170   12
+#define BCM11110   13
+#define BCM11211   14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM    4
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 00000000000..447eb340c61
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ *  This file contains the hardware definitions of the BCMRing.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START               PHYS_OFFSET
+
+#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE                PAGE_OFFSET
+
+#define pcibios_assign_all_busses()	1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 00000000000..cdbf93c694a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
+
+#endif
-- 
cgit v1.2.3


From 278a6752e869b0f4a03ce5ac0588b31b50712903 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:58:26 +0100
Subject: ARM: 5644/1: add bcmring core.c, clock.c, clock.h

add core.c, clock.c, and clock.h in mach-bcmring

implement timer init, clocksource init, amba device init
implement clock set/get enable/disable API
add dummy clkdev.h

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/clock.c               | 224 +++++++++++++++++
 arch/arm/mach-bcmring/clock.h               |  33 +++
 arch/arm/mach-bcmring/core.c                | 367 ++++++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/clkdev.h |   7 +
 4 files changed, 631 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/clock.c
 create mode 100644 arch/arm/mach-bcmring/clock.h
 create mode 100644 arch/arm/mach-bcmring/core.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/clkdev.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 00000000000..14bafc38f2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	/* enable parent clock first */
+	if (clk->parent)
+		__clk_enable(clk->parent);
+
+	if (clk->use_cnt++ == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Enable(clk->rate_hz, 0);
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Enable(clk->rate_hz);
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockEnable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockEnable(clk->csp_id);
+		}
+	}
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	BUG_ON(clk->use_cnt == 0);
+
+	if (--clk->use_cnt == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Disable();
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Disable();
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockDisable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockDisable(clk->csp_id);
+		}
+	}
+
+	if (clk->parent)
+		__clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0;
+
+	return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+	clk->rate_hz = rate_hz;
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+	struct clk *old_parent;
+
+	if (!clk || !parent)
+		return -EINVAL;
+
+	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+		return -EINVAL;
+
+	/* if more than one user, parent is not allowed */
+	if (clk->use_cnt > 1)
+		return -EBUSY;
+
+	if (clk->parent == parent)
+		return 0;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	old_parent = clk->parent;
+	clk->parent = parent;
+	if (clk_is_using_xtal(parent))
+		clk->mode |= CLK_MODE_XTAL;
+	else
+		clk->mode &= (~CLK_MODE_XTAL);
+
+	/* if clock is active */
+	if (clk->use_cnt != 0) {
+		clk->use_cnt--;
+		/* enable clock with the new parent */
+		__clk_enable(clk);
+		/* disable the old parent */
+		__clk_disable(old_parent);
+	}
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 00000000000..5e0b9813897
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1            2	/* PPL1 */
+#define CLK_TYPE_PLL2            4	/* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
+
+#define CLK_MODE_XTAL            1	/* clock source is from crystal */
+
+struct clk {
+	const char *name;	/* clock name */
+	unsigned int type;	/* clock type */
+	unsigned int mode;	/* current mode */
+	volatile int use_bypass;	/* indicate if it's in bypass mode */
+	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
+	unsigned long rate_hz;	/* clock rate in Hz */
+	unsigned int use_cnt;	/* usage count */
+	struct clk *parent;	/* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 00000000000..492c649f451
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ *  derived from linux/arch/arm/mach-versatile/core.c
+ *  linux/arch/arm/mach-bcmring/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size)       \
+static struct amba_device name##_device = {     \
+   .dev = {                                     \
+      .coherent_dma_mask = ~0,                  \
+      .init_name = initname,                    \
+      .platform_data = plat                     \
+   },                                           \
+   .res = {                                     \
+      .start = MM_ADDR_IO_##base,               \
+		.end = MM_ADDR_IO_##base + (size) - 1,    \
+      .flags = IORESOURCE_MEM                   \
+   },                                           \
+   .dma_mask = ~0,                              \
+   .irq = {                                     \
+      IRQ_##base                                \
+   }                                            \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+	.name = "PLL1",
+	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+	.rate_hz = 2000000000,
+	.use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+	.name = "UART",
+	.type = CLK_TYPE_PROGRAMMABLE,
+	.csp_id = chipcHw_CLOCK_UART,
+	.rate_hz = HW_CFG_UART_CLK_HZ,
+	.parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	{			/* UART0 */
+	 .dev_id = "uarta",
+	 .clk = &uart_clk,
+	 }, {			/* UART1 */
+	     .dev_id = "uartb",
+	     .clk = &uart_clk,
+	     }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uartA_device,
+	&uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+	int i;
+	u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+			  secHw_BLK_MASK_KEY_SCAN |
+			  secHw_BLK_MASK_TOUCH_SCREEN |
+			  secHw_BLK_MASK_UART0 |
+			  secHw_BLK_MASK_UART1 |
+			  secHw_BLK_MASK_WATCHDOG |
+			  secHw_BLK_MASK_SPUM |
+			  secHw_BLK_MASK_DDR2 |
+			  secHw_BLK_MASK_SPU |
+			  secHw_BLK_MASK_PKA |
+			  secHw_BLK_MASK_RNG |
+			  secHw_BLK_MASK_RTC |
+			  secHw_BLK_MASK_OTP |
+			  secHw_BLK_MASK_BOOT |
+			  secHw_BLK_MASK_MPU |
+			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
+	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+	bus_clock = chipcHw_REG_BUS_CLOCK_GE
+	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+	chipcHw_busInterfaceClockEnable(bus_clock);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 MM_IO_BASE_TMR
+#define TIMER1_VA_BASE		(MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE		(MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)	/* Divide by 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+		ctrl = TIMER_CTRL_PERIODIC;
+		ctrl |=
+		    TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+		    TIMER_CTRL_ENABLE;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TIMER_CTRL_ONESHOT;
+		ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+				struct clock_event_device *unused)
+{
+	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+	.name = "timer0",
+	.shift = 32,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = timer_set_mode,
+	.set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &timer0_clockevent;
+
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+	.name = "bcmring Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+	.name = "timer1",
+	.rating = 200,
+	.read = bcmring_get_cycles_timer1,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+	.name = "timer3",
+	.rating = 100,
+	.read = bcmring_get_cycles_timer3,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+	/* setup timer1 as free-running clocksource */
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER1_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer1.mult =
+	    clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+				 clocksource_bcmring_timer1.shift);
+	clocksource_register(&clocksource_bcmring_timer1);
+
+	/* setup timer3 as free-running clocksource */
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER3_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer3.mult =
+	    clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+				 clocksource_bcmring_timer3.shift);
+	clocksource_register(&clocksource_bcmring_timer3);
+
+	return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+	printk(KERN_INFO "bcmring_init_timer\n");
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	/*
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+	bcmring_clocksource_init();
+
+	timer0_clockevent.mult =
+	    div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+	timer0_clockevent.max_delta_ns =
+	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+	timer0_clockevent.min_delta_ns =
+	    clockevent_delta2ns(0xf, &timer0_clockevent);
+
+	timer0_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+	.init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
-- 
cgit v1.2.3


From b7462d654f623738b4b3e03cff20f68b5b9a77f5 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:04 +0100
Subject: ARM: 5645/1: bcmring: add bcmring irq.c

init irq and handler
add irq controller register file and header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/intcHw.h         |  40 ++++
 .../arm/mach-bcmring/include/mach/csp/intcHw_reg.h | 246 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/irqs.h          | 132 +++++++++++
 arch/arm/mach-bcmring/irq.c                        | 127 +++++++++++
 4 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/intcHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/irqs.h
 create mode 100644 arch/arm/mach-bcmring/irq.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 00000000000..1c639c8ee08
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+*  @file    intcHw.h
+*
+*  @brief   generic interrupt controller API
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 00000000000..e01fc4607c9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    intcHw_reg.h
+*
+*  @brief   platform specific interrupt controller bit assignments
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC           3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
+#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
+#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
+#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
+#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
+#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
+#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
+#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
+#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 00000000000..b279b825d4a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2007 Broadcom
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START     0
+#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
+#define IRQ_VPM            16	/* Voice process module interrupt */
+#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
+#define IRQ_USBH1          18	/* USB1 host interrupt */
+#define IRQ_USBD           19	/* USB device interrupt */
+#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
+#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
+#define IRQ_TIMER0         22	/* Timer0 interrupt */
+#define IRQ_TIMER1         23	/* Timer1 interrupt */
+#define IRQ_TIMER2         24	/* Timer2 interrupt */
+#define IRQ_TIMER3         25	/* Timer3 interrupt */
+#define IRQ_SPIH           26	/* SPI host interrupt */
+#define IRQ_ESW            27	/* Ethernet switch interrupt */
+#define IRQ_APM            28	/* Audio process module interrupt */
+#define IRQ_GE             29	/* Graphic engine interrupt */
+#define IRQ_CLCD           30	/* LCD Controller interrupt */
+#define IRQ_PIF            31	/* Peripheral interface interrupt */
+#define IRQ_INTC0_END      31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START    32
+#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
+#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
+#define IRQ_I2CH           36	/*  4 I2C host interrupt */
+#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
+#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
+#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
+#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
+#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB          44	/* 12 UARTB */
+#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
+#define IRQ_UARTA          46	/* 14 UARTA */
+#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
+#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
+#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG            52	/* 20 Random number generator interrupt */
+#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
+#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END      58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START    59
+#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
+#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
+#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END      74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/*       to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0                  100
+
+#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS               62
+
+#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN                 -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK        0xffffffff
+#define IRQ_INTC1_VALID_MASK        0x07ffffff
+#define IRQ_SINTC_VALID_MASK        0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 00000000000..dc1c4939b0c
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+	.typename = "ARM-INTC0",
+	.ack = bcmring_mask_irq0,
+	.mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
+	.unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+	.typename = "ARM-INTC1",
+	.ack = bcmring_mask_irq1,
+	.mask = bcmring_mask_irq1,
+	.unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+	.typename = "ARM-SINTC",
+	.ack = bcmring_mask_irq2,
+	.mask = bcmring_mask_irq2,
+	.unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+		     unsigned int irq_start, unsigned int vic_sources)
+{
+	unsigned int i;
+	for (i = 0; i < 32; i++) {
+		unsigned int irq = irq_start + i;
+		set_irq_chip(irq, chip);
+		set_irq_chip_data(irq, base);
+
+		if (vic_sources & (1 << i)) {
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+	writel(0, base + INTCHW_INTSELECT);
+	writel(0, base + INTCHW_INTENABLE);
+	writel(~0, base + INTCHW_INTENCLEAR);
+	writel(0, base + INTCHW_IRQSTATUS);
+	writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+	/* special cases */
+	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+	}
+	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+	}
+}
-- 
cgit v1.2.3


From 661f78d80969eefb25a0e99c08c0eba81b37861e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:57 +0100
Subject: ARM: 5646/1: bcmring: add mach-bcmring/mm.c and memory headers

memory map addresses
memory map description and init functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/csp/mm_addr.h   | 101 ++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/mm_io.h     | 147 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/memory.h        |  33 +++++
 .../mach-bcmring/include/mach/memory_settings.h    |  67 ++++++++++
 arch/arm/mach-bcmring/include/mach/vmalloc.h       |  25 ++++
 arch/arm/mach-bcmring/mm.c                         |  56 ++++++++
 6 files changed, 429 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory_settings.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-bcmring/mm.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 00000000000..86bb58d4f58
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_addr.h
+*
+*  @brief   Memory Map address defintions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*  Memory Map address definitions */
+
+#define MM_ADDR_DDR                0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC          0x20000000
+#define MM_ADDR_IO_BROM            0x30000000
+#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0            0x30200000
+#define MM_ADDR_IO_DMA1            0x30300000
+#define MM_ADDR_IO_ESW             0x30400000
+#define MM_ADDR_IO_CLCD            0x30500000
+#define MM_ADDR_IO_PIF             0x30580000
+#define MM_ADDR_IO_APM             0x30600000
+#define MM_ADDR_IO_SPUM            0x30700000
+#define MM_ADDR_IO_VPM_PROG        0x30800000
+#define MM_ADDR_IO_VPM_DATA        0x30A00000
+#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
+#define MM_ADDR_IO_CHIPC           0x80000000
+#define MM_ADDR_IO_UMI             0x80001000
+#define MM_ADDR_IO_NAND            0x80001800
+#define MM_ADDR_IO_LEDM            0x80002000
+#define MM_ADDR_IO_PWM             0x80002040
+#define MM_ADDR_IO_VINTC           0x80003000
+#define MM_ADDR_IO_GPIO0           0x80004000
+#define MM_ADDR_IO_GPIO1           0x80004800
+#define MM_ADDR_IO_I2CS            0x80005000
+#define MM_ADDR_IO_SPIS            0x80006000
+#define MM_ADDR_IO_HPM             0x80007400
+#define MM_ADDR_IO_HPM_REMAP       0x80007800
+#define MM_ADDR_IO_TZPC            0x80008000
+#define MM_ADDR_IO_MPU             0x80009000
+#define MM_ADDR_IO_SPUMP           0x8000a000
+#define MM_ADDR_IO_PKA             0x8000b000
+#define MM_ADDR_IO_RNG             0x8000c000
+#define MM_ADDR_IO_KEYC            0x8000d000
+#define MM_ADDR_IO_BBL             0x8000e000
+#define MM_ADDR_IO_OTP             0x8000f000
+#define MM_ADDR_IO_I2S0            0x80010000
+#define MM_ADDR_IO_I2S1            0x80011000
+#define MM_ADDR_IO_UARTA           0x80012000
+#define MM_ADDR_IO_UARTB           0x80013000
+#define MM_ADDR_IO_I2CH            0x80014020
+#define MM_ADDR_IO_SPIH            0x80015000
+#define MM_ADDR_IO_TSC             0x80016000
+#define MM_ADDR_IO_TMR             0x80017000
+#define MM_ADDR_IO_WATCHDOG        0x80017800
+#define MM_ADDR_IO_ETM             0x80018000
+#define MM_ADDR_IO_DDRC            0x80019000
+#define MM_ADDR_IO_SINTC           0x80100000
+#define MM_ADDR_IO_INTC0           0x80200000
+#define MM_ADDR_IO_INTC1           0x80201000
+#define MM_ADDR_IO_GE              0x80300000
+#define MM_ADDR_IO_USB_CTLR0       0x80400000
+#define MM_ADDR_IO_USB_CTLR1       0x80410000
+#define MM_ADDR_IO_USB_PHY         0x80420000
+#define MM_ADDR_IO_SDIOH0          0x80500000
+#define MM_ADDR_IO_SDIOH1          0x80600000
+#define MM_ADDR_IO_VDEC            0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 00000000000..de92ec6a01a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_io.h
+*
+*  @brief   Memory Map I/O definitions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory.  For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
+#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 00000000000..114f942bb4f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 00000000000..ce5cd16f2ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
+#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
+#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
+#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
+#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
+#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+	| HW_CFG_NAND_tWP  \
+	| HW_CFG_NAND_tWR  \
+	| HW_CFG_NAND_tAS  \
+	| HW_CFG_NAND_tOE  \
+	| HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
+#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
+#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
+#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
+#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+	| HW_CFG_NOR_TBTA      \
+	| HW_CFG_NOR_TWP       \
+	| HW_CFG_NOR_TWR       \
+	| HW_CFG_NOR_TAS       \
+	| HW_CFG_NOR_TOE       \
+	| HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 00000000000..35e2ead8395
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 00000000000..0f1c37e4523
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
+
+	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
+	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
+
+	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
-- 
cgit v1.2.3


From 7c4c2951c0077eecf9a9dfda59a43eedd09a01f4 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:00:39 +0100
Subject: ARM: 5647/1: bcmring: add bcmring dma.h and dma_device.c

add bcmring dma.h and dma_device.c

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma_device.c       | 593 ++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/dma.h | 826 +++++++++++++++++++++++++++++++
 2 files changed, 1419 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma_device.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/dma.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 00000000000..ca0ad736870
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma_device.c
+*
+*   @brief  private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-mem",
+	 .config = {
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+		    },
+	 },
+	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
+	{
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+	 .name = "vpm",
+	 .dedicatedController = 0,
+	 .dedicatedChannel = 0,
+	 /* reserve DMA0:0 for VPM */
+	 },
+	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "nand",
+	 .config = {
+		    .srcPeripheralPort = 0,
+		    .dstPeripheralPort = 0,
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+		    },
+	 },
+	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_tx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    /* dstPeripheralPort          = 5 or 14 */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_rx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    /* srcPeripheralPort          = 5 or 14 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_rx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: I2S0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: I2S1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
+	{
+	 .name = "esw_tx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 3,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x30490010,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
+	{
+	 .name = "esw_rx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 2,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x30480010,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "apm_c_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_rx",
+	 .config = {
+		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 13,	/* DST: PCM0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_rx",
+	 .config = {
+		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 15,	/* DST: PCM1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_rx",
+	 .config = {
+		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    /* on the RX side, SPU needs to be the flow controller */
+		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 7,	/* DST: SPUM */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-vram",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "vram-to-mem",
+	 .config = {
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 00000000000..847980c85c8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.h
+*
+*   @brief  API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION   1
+
+#define DMA_NUM_CONTROLLERS     2
+#define DMA_NUM_CHANNELS        8	/* per controller */
+
+typedef enum {
+	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
+	DMA_DEVICE_I2S0_DEV_TO_MEM,
+	DMA_DEVICE_I2S0_MEM_TO_DEV,
+	DMA_DEVICE_I2S1_DEV_TO_MEM,
+	DMA_DEVICE_I2S1_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
+	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+	DMA_DEVICE_SPUM_DEV_TO_MEM,
+	DMA_DEVICE_SPUM_MEM_TO_DEV,
+	DMA_DEVICE_SPIH_DEV_TO_MEM,
+	DMA_DEVICE_SPIH_MEM_TO_DEV,
+	DMA_DEVICE_UART_A_DEV_TO_MEM,
+	DMA_DEVICE_UART_A_MEM_TO_DEV,
+	DMA_DEVICE_UART_B_DEV_TO_MEM,
+	DMA_DEVICE_UART_B_MEM_TO_DEV,
+	DMA_DEVICE_PIF_MEM_TO_DEV,
+	DMA_DEVICE_PIF_DEV_TO_MEM,
+	DMA_DEVICE_ESW_DEV_TO_MEM,
+	DMA_DEVICE_ESW_MEM_TO_DEV,
+	DMA_DEVICE_VPM_MEM_TO_MEM,
+	DMA_DEVICE_CLCD_MEM_TO_MEM,
+	DMA_DEVICE_NAND_MEM_TO_MEM,
+	DMA_DEVICE_MEM_TO_VRAM,
+	DMA_DEVICE_VRAM_TO_MEM,
+
+	/* Add new entries before this line. */
+
+	DMA_NUM_DEVICE_ENTRIES,
+	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+*   The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
+*   to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+	void *virtAddr;		/* Virtual Address of the descriptor ring */
+	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
+	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
+	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+*   DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE    4096	/* Pages less than this size are better */
+					/* off not being DMA'd. */
+
+typedef enum {
+	DMA_MEM_TYPE_NONE,	/* Not a valid setting */
+	DMA_MEM_TYPE_VMALLOC,	/* Memory came from vmalloc call */
+	DMA_MEM_TYPE_KMALLOC,	/* Memory came from kmalloc call */
+	DMA_MEM_TYPE_DMA,	/* Memory came from dma_alloc_xxx call */
+	DMA_MEM_TYPE_USER,	/* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+	void *virtAddr;		/* Virtual address used for this segment */
+	dma_addr_t physAddr;	/* Physical address this segment maps to */
+	size_t numBytes;	/* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+	DMA_MemType_t memType;
+	void *virtAddr;
+	size_t numBytes;
+
+	/* Each region (virtually contiguous) consists of one or more segments. Each */
+	/* segment is virtually and physically contiguous. */
+
+	int numSegmentsUsed;
+	int numSegmentsAllocated;
+	DMA_Segment_t *segment;
+
+	/* When a region corresponds to user memory, we need to lock all of the pages */
+	/* down before we can figure out the physical addresses. The lockedPage array contains */
+	/* the pages that were locked, and which subsequently need to be unlocked once the */
+	/* memory is unmapped. */
+
+	unsigned numLockedPages;
+	struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+	int inUse;		/* Is this mapping currently being used? */
+	struct semaphore lock;	/* Acquired when using this structure */
+	enum dma_data_direction dir;	/* Direction this transfer is intended for */
+
+	/* In the event that we're mapping user memory, we need to know which task */
+	/* the memory is for, so that we can obtain the correct mm locks. */
+
+	struct task_struct *userTask;
+
+	int numRegionsUsed;
+	int numRegionsAllocated;
+	DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+*   The DMA_DeviceAttribute_t contains information which describes a
+*   particular DMA device (or peripheral).
+*
+*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+*   statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+				     void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
+#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/*       determine which DMA controllers a given device can be used from, and the interface */
+/*       array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	const char *name;	/* Will show up in the /proc entry */
+
+	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
+
+	void *userData;		/* Passed to the devHandler */
+	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
+
+	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
+
+	/* The following statistical information will be collected and presented in a proc entry. */
+	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+	/*       a 64 bit counter. */
+
+	uint64_t numTransfers;	/* Number of DMA transfers performed */
+	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+	uint64_t transferBytes;	/* Total bytes transferred */
+	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
+	uint32_t numBytes;	/* Last transfer size */
+
+	/* It's not possible to free memory which is allocated for the descriptors from within */
+	/* the ISR. So make the presumption that a given device will tend to use the */
+	/* same sized buffers over and over again, and we keep them around. */
+
+	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
+
+	/* We stash away some of the information from the previous transfer. If back-to-back */
+	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+	/* the descriptor buffers. */
+
+	uint32_t prevNumBytes;
+	dma_addr_t prevSrcData;
+	dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+*   data structures and don't belong in this header file, but are included
+*   merely for discussion.
+*
+*   By the time this is implemented, these structures will be moved out into
+*   the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+*   The DMA_Channel_t contains state information about each DMA channel. Some
+*   of the channels are dedicated. Non-dedicated channels are shared
+*   amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
+
+typedef struct {
+	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+	DMA_Device_t devType;	/* Device this channel is currently reserved for */
+	DMA_Device_t lastDevType;	/* Device type that used this previously */
+	char name[20];		/* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	const char *fileName;	/* Place where channel reservation took place */
+	int lineNum;		/* Place where channel reservation took place */
+#endif
+	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+*   The DMA_Controller_t contains state information about each DMA controller.
+*
+*   The freeChannelQ is stored in the controller data structure rather than
+*   the channel data structure since several of the devices are accessible
+*   from multiple controllers, and there is no way to know which controller
+*   will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+	DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+*   The DMA_Global_t contains all of the global state information used by
+*   the DMA code.
+*
+*   Callers which need to allocate a shared channel will be queued up
+*   on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+	struct semaphore lock;	/* acquired when manipulating table entries */
+	wait_queue_head_t freeChannelQ;
+
+	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+*   Initializes the DMA module.
+*
+*   @return
+*       0       - Success
+*       < 0     - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+				     int lineNum);
+#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
+    );
+#endif
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*
+*   @return
+*        0      - DMA Handle was released successfully.
+*       -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return boolean
+*       0           Device uses a dedicated channel
+*       non-zero    Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    );
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    );
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+*   Sets the process (aka userTask) associated with a mem map. This is
+*   required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+					     struct task_struct *task)
+{
+	memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+*   Initializes a memory map for use. Since this function acquires a
+*   sempaphore within the memory map, it is VERY important that dma_unmap
+*   be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    );
+
+/****************************************************************************/
+/**
+*   Creates a descriptor ring from a memory mapping.
+*
+*   @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *addr,	/* Virtual address that we want to get a map of */
+		size_t count,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA transfer
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from memory to a device.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
+					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
+					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
+					 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from a device to memory.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
+					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
+					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
+					   size_t numBytes	/* Number of bytes to retrieve from the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a memory to memory transfer.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
+					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
+					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
+					  size_t numBytes	/* Number of bytes to transfer */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
-- 
cgit v1.2.3


From 859277f7dbf8b48016d55ea2171d04eed074d858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:13 +0100
Subject: ARM: 5648/1: bcmring: add bmcring dma.c

implement dma support for bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma.c | 2321 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 2321 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 00000000000..7b20fccb9d4
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.c
+*
+*   @brief  Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG   0
+
+#if DMA_MAP_DEBUG
+#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
+#else
+#   define  DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions  ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int len = 0;
+
+	len += sprintf(buf + len, "dma_map_mem statistics\n");
+	len +=
+	    sprintf(buf + len, "coherent: %d\n",
+		    atomic_read(&gDmaStatMemTypeCoherent));
+	len +=
+	    sprintf(buf + len, "kmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeKmalloc));
+	len +=
+	    sprintf(buf + len, "vmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeVmalloc));
+	len +=
+	    sprintf(buf + len, "user:     %d\n",
+		    atomic_read(&gDmaStatMemTypeUser));
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int controllerIdx;
+	int channelIdx;
+	int limit = count - 200;
+	int len = 0;
+	DMA_Channel_t *channel;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			if (len >= limit) {
+				break;
+			}
+
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			len +=
+			    sprintf(buf + len, "%d:%d ", controllerIdx,
+				    channelIdx);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				len +=
+				    sprintf(buf + len, "Dedicated for %s ",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+			} else {
+				len += sprintf(buf + len, "Shared ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+				len += sprintf(buf + len, "No ISR ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+				len += sprintf(buf + len, "Fifo: 128 ");
+			} else {
+				len += sprintf(buf + len, "Fifo: 64  ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+				len +=
+				    sprintf(buf + len, "InUse by %s",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+				len +=
+				    sprintf(buf + len, " (%s:%d)",
+					    channel->fileName,
+					    channel->lineNum);
+#endif
+			} else {
+				len += sprintf(buf + len, "Avail ");
+			}
+
+			if (channel->lastDevType != DMA_DEVICE_NONE) {
+				len +=
+				    sprintf(buf + len, "Last use: %s ",
+					    DMA_gDeviceAttribute[channel->
+								 lastDevType].
+					    name);
+			}
+
+			len += sprintf(buf + len, "\n");
+		}
+	}
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+				 int count, int *eof, void *data)
+{
+	int limit = count - 200;
+	int len = 0;
+	int devIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (devAttr->name == NULL) {
+			continue;
+		}
+
+		if (len >= limit) {
+			break;
+		}
+
+		len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			len +=
+			    sprintf(buf + len, "Dedicated %d:%d ",
+				    devAttr->dedicatedController,
+				    devAttr->dedicatedChannel);
+		} else {
+			len += sprintf(buf + len, "Shared DMA:");
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+				len += sprintf(buf + len, "0");
+			}
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+				len += sprintf(buf + len, "1");
+			}
+			len += sprintf(buf + len, " ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+			len += sprintf(buf + len, "NoISR ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+			len += sprintf(buf + len, "Allow-128 ");
+		}
+
+		len +=
+		    sprintf(buf + len,
+			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+			    devAttr->numTransfers, devAttr->transferTicks,
+			    devAttr->transferBytes,
+			    devAttr->ring.bytesAllocated);
+
+	}
+
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Determines if a DMA_Device_t is "valid".
+*
+*   @return
+*       TRUE        - dma device is valid
+*       FALSE       - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+*   Translates a DMA handle into a pointer to a channel.
+*
+*   @return
+*       non-NULL    - pointer to DMA_Channel_t
+*       NULL        - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+	int controllerIdx;
+	int channelIdx;
+
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+	channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+	if ((controllerIdx > DMA_NUM_CONTROLLERS)
+	    || (channelIdx > DMA_NUM_CHANNELS)) {
+		return NULL;
+	}
+	return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+*   Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int irqStatus;
+
+	channel = (DMA_Channel_t *) dev_id;
+
+	/* Figure out why we were called, and knock down the interrupt */
+
+	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+	dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+	if ((channel->devType < 0)
+	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+		       channel->devType);
+		return IRQ_NONE;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Update stats */
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+		devAttr->transferTicks +=
+		    (timer_get_tick_count() - devAttr->transferStartTime);
+	}
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+		printk(KERN_ERR
+		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+		       channel->devType, devAttr->name);
+	} else {
+		devAttr->numTransfers++;
+		devAttr->transferBytes += devAttr->numBytes;
+	}
+
+	/* Call any installed handler */
+
+	if (devAttr->devHandler != NULL) {
+		devAttr->devHandler(channel->devType, irqStatus,
+				    devAttr->userData);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -EINVAL     Invalid parameters passed in
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    ) {
+	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+	if ((ring == NULL) || (numDescriptors <= 0)) {
+		return -EINVAL;
+	}
+
+	ring->physAddr = 0;
+	ring->descriptorsAllocated = 0;
+	ring->bytesAllocated = 0;
+
+	ring->virtAddr = dma_alloc_writecombine(NULL,
+						     bytesToAlloc,
+						     &ring->physAddr,
+						     GFP_KERNEL);
+	if (ring->virtAddr == NULL) {
+		return -ENOMEM;
+	}
+
+	ring->bytesAllocated = bytesToAlloc;
+	ring->descriptorsAllocated = numDescriptors;
+
+	return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    ) {
+	if (ring->virtAddr != NULL) {
+		dma_free_writecombine(NULL,
+				      ring->bytesAllocated,
+				      ring->virtAddr, ring->physAddr);
+	}
+
+	ring->bytesAllocated = 0;
+	ring->descriptorsAllocated = 0;
+	ring->virtAddr = NULL;
+	ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    ) {
+	if (ring->virtAddr == NULL) {
+		return -EINVAL;
+	}
+	if (dmacHw_initDescriptor(ring->virtAddr,
+				  ring->physAddr,
+				  ring->bytesAllocated, numDescriptors) < 0) {
+		printk(KERN_ERR
+		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -ENODEV - Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR
+		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+		return -EINVAL;
+	}
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int rc;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	rc = dmacHw_setDataDescriptor(&devAttr->config,
+				      ring->virtAddr,
+				      (void *)srcData,
+				      (void *)dstData, numBytes);
+	if (rc < 0) {
+		printk(KERN_ERR
+		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+		       rc);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	/* Free the previously allocated descriptor ring */
+
+	dma_free_descriptor_ring(&devAttr->ring);
+
+	if (ring != NULL) {
+		/* Copy in the new one */
+
+		devAttr->ring = *ring;
+	}
+
+	/* Set things up so that if dma_transfer is called then this descriptor */
+	/* ring will get freed. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	memset(ring, 0, sizeof(*ring));
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	*ring = devAttr->ring;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Configures a DMA channel.
+*
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int controllerIdx;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+		if (devAttr->config.transferType ==
+		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+			devAttr->config.dstPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		} else if (devAttr->config.transferType ==
+			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+			devAttr->config.srcPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		}
+	}
+
+	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Intializes all of the data structures associated with the DMA.
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+	int rc = 0;
+	int controllerIdx;
+	int channelIdx;
+	DMA_Device_t devIdx;
+	DMA_Channel_t *channel;
+	DMA_Handle_t dedicatedHandle;
+
+	memset(&gDMA, 0, sizeof(gDMA));
+
+	init_MUTEX_LOCKED(&gDMA.lock);
+	init_waitqueue_head(&gDMA.freeChannelQ);
+
+	/* Initialize the Hardware */
+
+	dmacHw_initDma();
+
+	/* Start off by marking all of the DMA channels as shared. */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			channel->flags = 0;
+			channel->devType = DMA_DEVICE_NONE;
+			channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+			channel->fileName = "";
+			channel->lineNum = 0;
+#endif
+
+			channel->dmacHwHandle =
+			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+						    (controllerIdx,
+						     channelIdx));
+			dmacHw_initChannel(channel->dmacHwHandle);
+		}
+	}
+
+	/* Record any special attributes that channels may have */
+
+	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+	/* Now walk through and record the dedicated channels. */
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+			printk(KERN_ERR
+			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+			       devAttr->name);
+			rc = -EINVAL;
+			goto out;
+		}
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			/* This is a dedicated device. Mark the channel as being reserved. */
+
+			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Controller %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedController);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Channel %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedChannel);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			dedicatedHandle =
+			    MAKE_HANDLE(devAttr->dedicatedController,
+					devAttr->dedicatedChannel);
+			channel = HandleToChannel(dedicatedHandle);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				printk
+				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+				     devAttr->name,
+				     devAttr->dedicatedController,
+				     devAttr->dedicatedChannel,
+				     DMA_gDeviceAttribute[channel->devType].
+				     name);
+				rc = -EBUSY;
+				goto out;
+			}
+
+			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+			channel->devType = devIdx;
+
+			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+			}
+
+			/* For dedicated channels, we can go ahead and configure the DMA channel now */
+			/* as well. */
+
+			ConfigChannel(dedicatedHandle);
+		}
+	}
+
+	/* Go through and register the interrupt handlers */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+				snprintf(channel->name, sizeof(channel->name),
+					 "dma %d:%d %s", controllerIdx,
+					 channelIdx,
+					 channel->devType ==
+					 DMA_DEVICE_NONE ? "" :
+					 DMA_gDeviceAttribute[channel->devType].
+					 name);
+
+				rc =
+				     request_irq(IRQ_DMA0C0 +
+						 (controllerIdx *
+						  DMA_NUM_CHANNELS) +
+						 channelIdx,
+						 dma_interrupt_handler,
+						 IRQF_DISABLED, channel->name,
+						 channel);
+				if (rc != 0) {
+					printk(KERN_ERR
+					       "request_irq for IRQ_DMA%dC%d failed\n",
+					       controllerIdx, channelIdx);
+				}
+			}
+		}
+	}
+
+	/* Create /proc/dma/channels and /proc/dma/devices */
+
+	gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+	if (gDmaDir == NULL) {
+		printk(KERN_ERR "Unable to create /proc/dma\n");
+	} else {
+		create_proc_read_entry("channels", 0, gDmaDir,
+				       dma_proc_read_channels, NULL);
+		create_proc_read_entry("devices", 0, gDmaDir,
+				       dma_proc_read_devices, NULL);
+		create_proc_read_entry("mem-type", 0, gDmaDir,
+				       dma_proc_read_mem_type, NULL);
+	}
+
+out:
+
+	up(&gDMA.lock);
+
+	return rc;
+}
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+    (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+	DMA_Handle_t handle;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Channel_t *channel;
+	int controllerIdx;
+	int controllerIdx2;
+	int channelIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+		handle = -ENODEV;
+		goto out;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	{
+		char *s;
+
+		s = strrchr(fileName, '/');
+		if (s != NULL) {
+			fileName = s + 1;
+		}
+	}
+#endif
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+		/* This device has already been requested and not been freed */
+
+		printk(KERN_ERR "%s: device %s is already requested\n",
+		       __func__, devAttr->name);
+		handle = -EBUSY;
+		goto out;
+	}
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+		/* This device has a dedicated channel. */
+
+		channel =
+		    &gDMA.controller[devAttr->dedicatedController].
+		    channel[devAttr->dedicatedChannel];
+		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+			handle = -EBUSY;
+			goto out;
+		}
+
+		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+		channel->fileName = fileName;
+		channel->lineNum = lineNum;
+#endif
+		handle =
+		    MAKE_HANDLE(devAttr->dedicatedController,
+				devAttr->dedicatedChannel);
+		goto out;
+	}
+
+	/* This device needs to use one of the shared channels. */
+
+	handle = DMA_INVALID_HANDLE;
+	while (handle == DMA_INVALID_HANDLE) {
+		/* Scan through the shared channels and see if one is available */
+
+		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+		     controllerIdx2++) {
+			/* Check to see if we should try on controller 1 first. */
+
+			controllerIdx = controllerIdx2;
+			if ((devAttr->
+			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+				controllerIdx = 1 - controllerIdx;
+			}
+
+			/* See if the device is available on the controller being tested */
+
+			if ((devAttr->
+			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+			    != 0) {
+				for (channelIdx = 0;
+				     channelIdx < DMA_NUM_CHANNELS;
+				     channelIdx++) {
+					channel =
+					    &gDMA.controller[controllerIdx].
+					    channel[channelIdx];
+
+					if (((channel->
+					      flags &
+					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+					     0)
+					    &&
+					    ((channel->
+					      flags & DMA_CHANNEL_FLAG_IN_USE)
+					     == 0)) {
+						if (((channel->
+						      flags &
+						      DMA_CHANNEL_FLAG_LARGE_FIFO)
+						     != 0)
+						    &&
+						    ((devAttr->
+						      flags &
+						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+						     == 0)) {
+							/* This channel is a large fifo - don't tie it up */
+							/* with devices that we don't want using it. */
+
+							continue;
+						}
+
+						channel->flags |=
+						    DMA_CHANNEL_FLAG_IN_USE;
+						channel->devType = dev;
+						devAttr->flags |=
+						    DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+						channel->fileName = fileName;
+						channel->lineNum = lineNum;
+#endif
+						handle =
+						    MAKE_HANDLE(controllerIdx,
+								channelIdx);
+
+						/* Now that we've reserved the channel - we can go ahead and configure it */
+
+						if (ConfigChannel(handle) != 0) {
+							handle = -EIO;
+							printk(KERN_ERR
+							       "dma_request_channel: ConfigChannel failed\n");
+						}
+						goto out;
+					}
+				}
+			}
+		}
+
+		/* No channels are currently available. Let's wait for one to free up. */
+
+		{
+			DEFINE_WAIT(wait);
+
+			prepare_to_wait(&gDMA.freeChannelQ, &wait,
+					TASK_INTERRUPTIBLE);
+			up(&gDMA.lock);
+			schedule();
+			finish_wait(&gDMA.freeChannelQ, &wait);
+
+			if (signal_pending(current)) {
+				/* We don't currently hold gDMA.lock, so we return directly */
+
+				return -ERESTARTSYS;
+			}
+		}
+
+		if (down_interruptible(&gDMA.lock)) {
+			return -ERESTARTSYS;
+		}
+	}
+
+out:
+	up(&gDMA.lock);
+
+	return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
+    ) {
+	int rc = 0;
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+		channel->lastDevType = channel->devType;
+		channel->devType = DMA_DEVICE_NONE;
+	}
+	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+	up(&gDMA.lock);
+
+	wake_up_interruptible(&gDMA.freeChannelQ);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return
+*       0           Device uses a dedicated channel
+*       > zero      Device uses a shared channel
+*       < zero      Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, numDescriptors);
+			return rc;
+		}
+		/* Setup the descriptor for this transfer */
+
+		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+					  devAttr->ring.physAddr,
+					  devAttr->ring.bytesAllocated,
+					  numDescriptors) < 0) {
+			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+			       __func__);
+			return -EINVAL;
+		}
+	} else {
+		/* We've already got enough ring buffer allocated. All we need to do is reset */
+		/* any control information, just in case the previous DMA was stopped. */
+
+		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Remember the critical information for this transfer so that we can eliminate */
+	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+	devAttr->prevSrcData = srcData;
+	devAttr->prevDstData = dstData;
+	devAttr->prevNumBytes = numBytes;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDst1Descriptors;
+	int numDst2Descriptors;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDst1Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData1, numBytes);
+	if (numDst1Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDst2Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData2, numBytes);
+	if (numDst2Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDescriptors = numDst1Descriptors + numDst2Descriptors;
+	/* printk("numDescriptors: %d\n", numDescriptors); */
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, ringBytesRequired);
+			return rc;
+		}
+	}
+
+	/* Setup the descriptor for this transfer. Since this function is used with */
+	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+	/* setDataDescriptor will keep trying to append onto the end. */
+
+	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+				  devAttr->ring.physAddr,
+				  devAttr->ring.bytesAllocated,
+				  numDescriptors) < 0) {
+		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+		return -EINVAL;
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData1, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData2, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+	/* try to make the 'prev' variables right. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	dmacHw_stopTransfer(channel->dmacHwHandle);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	dmacHw_TRANSFER_STATUS_e status;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	while ((status =
+		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+	       dmacHw_TRANSFER_STATUS_BUSY) {
+		;
+	}
+
+	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+		return -EIO;
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA, allocating the descriptors as required.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* We keep track of the information about the previous request for this */
+	/* device, and if the attributes match, then we can use the descriptors we setup */
+	/* the last time, and not have to reinitialize everything. */
+
+	{
+		rc =
+		     dma_alloc_descriptors(handle, transferType, srcData,
+					   dstData, numBytes);
+		if (rc != 0) {
+			return rc;
+		}
+	}
+
+	/* And kick off the transfer */
+
+	devAttr->numBytes = numBytes;
+	devAttr->transferStartTime = timer_get_tick_count();
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+	unsigned long flags;
+
+	if (!IsDeviceValid(dev)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	local_irq_save(flags);
+
+	devAttr->userData = userData;
+	devAttr->devHandler = devHandler;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+*   Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+	memset(memMap, 0, sizeof(*memMap));
+
+	init_MUTEX(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+	down(&memMap->lock);	/* Just being paranoid */
+
+	/* Free up any allocated memory */
+
+	up(&memMap->lock);
+	memset(memMap, 0, sizeof(*memMap));
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+	unsigned long addrVal = (unsigned long)addr;
+
+	if (addrVal >= VMALLOC_END) {
+		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+		/* dma_alloc_xxx pages are physically and virtually contiguous */
+
+		return DMA_MEM_TYPE_DMA;
+	}
+
+	/* Technically, we could add one more classification. Addresses between VMALLOC_END */
+	/* and the beginning of the DMA virtual address could be considered to be I/O space. */
+	/* Right now, nobody cares about this particular classification, so we ignore it. */
+
+	if (is_vmalloc_addr(addr)) {
+		/* Address comes from the vmalloc'd region. Pages are virtually */
+		/* contiguous but NOT physically contiguous */
+
+		return DMA_MEM_TYPE_VMALLOC;
+	}
+
+	if (addrVal >= PAGE_OFFSET) {
+		/* PAGE_OFFSET is typically 0xC0000000 */
+
+		/* kmalloc'd pages are physically contiguous */
+
+		return DMA_MEM_TYPE_KMALLOC;
+	}
+
+	return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+	DMA_MemType_t memType = dma_mem_type(addr);
+
+	return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+	    || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+	    || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+	if (memMap->inUse) {
+		printk(KERN_ERR "%s: memory map %p is already being used\n",
+		       __func__, memMap);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	memMap->inUse = 1;
+	memMap->dir = dir;
+	memMap->numRegionsUsed = 0;
+
+	rc = 0;
+
+out:
+
+	DMA_MAP_PRINT("returning %d", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map. Each segment is both
+*   physically and virtually contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+			       DMA_Region_t *region,	/* Region that the segment belongs to */
+			       void *virtAddr,	/* Virtual address of the segment being added */
+			       dma_addr_t physAddr,	/* Physical address of the segment being added */
+			       size_t numBytes	/* Number of bytes of the segment being added */
+    ) {
+	DMA_Segment_t *segment;
+
+	DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+		      physAddr, numBytes);
+
+	/* Sanity check */
+
+	if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+	    || (((unsigned long)virtAddr + numBytes)) >
+	    ((unsigned long)region->virtAddr + region->numBytes)) {
+		printk(KERN_ERR
+		       "%s: virtAddr %p is outside region @ %p len: %d\n",
+		       __func__, virtAddr, region->virtAddr, region->numBytes);
+		return -EINVAL;
+	}
+
+	if (region->numSegmentsUsed > 0) {
+		/* Check to see if this segment is physically contiguous with the previous one */
+
+		segment = &region->segment[region->numSegmentsUsed - 1];
+
+		if ((segment->physAddr + segment->numBytes) == physAddr) {
+			/* It is - just add on to the end */
+
+			DMA_MAP_PRINT("appending %d bytes to last segment\n",
+				      numBytes);
+
+			segment->numBytes += numBytes;
+
+			return 0;
+		}
+	}
+
+	/* Reallocate to hold more segments, if required. */
+
+	if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+		DMA_Segment_t *newSegment;
+		size_t oldSize =
+		    region->numSegmentsAllocated * sizeof(*newSegment);
+		int newAlloc = region->numSegmentsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newSegment);
+
+		newSegment = kmalloc(newSize, GFP_KERNEL);
+		if (newSegment == NULL) {
+			return -ENOMEM;
+		}
+		memcpy(newSegment, region->segment, oldSize);
+		memset(&((uint8_t *) newSegment)[oldSize], 0,
+		       newSize - oldSize);
+		kfree(region->segment);
+
+		region->numSegmentsAllocated = newAlloc;
+		region->segment = newSegment;
+	}
+
+	segment = &region->segment[region->numSegmentsUsed];
+	region->numSegmentsUsed++;
+
+	segment->virtAddr = virtAddr;
+	segment->physAddr = physAddr;
+	segment->numBytes = numBytes;
+
+	DMA_MAP_PRINT("returning success\n");
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to a memory map. Each region is virtually
+*   contiguous, but not necessarily physically contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    ) {
+	unsigned long addr = (unsigned long)mem;
+	unsigned int offset;
+	int rc = 0;
+	DMA_Region_t *region;
+	dma_addr_t physAddr;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+	if (!memMap->inUse) {
+		printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+		       __func__);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Reallocate to hold more regions. */
+
+	if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+		DMA_Region_t *newRegion;
+		size_t oldSize =
+		    memMap->numRegionsAllocated * sizeof(*newRegion);
+		int newAlloc = memMap->numRegionsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newRegion);
+
+		newRegion = kmalloc(newSize, GFP_KERNEL);
+		if (newRegion == NULL) {
+			rc = -ENOMEM;
+			goto out;
+		}
+		memcpy(newRegion, memMap->region, oldSize);
+		memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+		kfree(memMap->region);
+
+		memMap->numRegionsAllocated = newAlloc;
+		memMap->region = newRegion;
+	}
+
+	region = &memMap->region[memMap->numRegionsUsed];
+	memMap->numRegionsUsed++;
+
+	offset = addr & ~PAGE_MASK;
+
+	region->memType = dma_mem_type(mem);
+	region->virtAddr = mem;
+	region->numBytes = numBytes;
+	region->numSegmentsUsed = 0;
+	region->numLockedPages = 0;
+	region->lockedPages = NULL;
+
+	switch (region->memType) {
+	case DMA_MEM_TYPE_VMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeVmalloc);
+
+			/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+			/* vmalloc'd pages are not physically contiguous */
+
+			rc = -EINVAL;
+			break;
+		}
+
+	case DMA_MEM_TYPE_KMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeKmalloc);
+
+			/* kmalloc'd pages are physically contiguous, so they'll have exactly */
+			/* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+			physAddr =
+			    dma_map_single(NULL, mem, numBytes, memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+#else
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	case DMA_MEM_TYPE_DMA:
+		{
+			/* dma_alloc_xxx pages are physically contiguous */
+
+			atomic_inc(&gDmaStatMemTypeCoherent);
+
+			physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+			dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+						memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+			break;
+		}
+
+	case DMA_MEM_TYPE_USER:
+		{
+			size_t firstPageOffset;
+			size_t firstPageSize;
+			struct page **pages;
+			struct task_struct *userTask;
+
+			atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+			/* If the pages are user pages, then the dma_mem_map_set_user_task function */
+			/* must have been previously called. */
+
+			if (memMap->userTask == NULL) {
+				printk(KERN_ERR
+				       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+				       __func__);
+				return -EINVAL;
+			}
+
+			/* User pages need to be locked. */
+
+			firstPageOffset =
+			    (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+			firstPageSize = PAGE_SIZE - firstPageOffset;
+
+			region->numLockedPages = (firstPageOffset
+						  + region->numBytes +
+						  PAGE_SIZE - 1) / PAGE_SIZE;
+			pages =
+			    kmalloc(region->numLockedPages *
+				    sizeof(struct page *), GFP_KERNEL);
+
+			if (pages == NULL) {
+				region->numLockedPages = 0;
+				return -ENOMEM;
+			}
+
+			userTask = memMap->userTask;
+
+			down_read(&userTask->mm->mmap_sem);
+			rc = get_user_pages(userTask,	/* task */
+					    userTask->mm,	/* mm */
+					    (unsigned long)region->virtAddr,	/* start */
+					    region->numLockedPages,	/* len */
+					    memMap->dir == DMA_FROM_DEVICE,	/* write */
+					    0,	/* force */
+					    pages,	/* pages (array of pointers to page) */
+					    NULL);	/* vmas */
+			up_read(&userTask->mm->mmap_sem);
+
+			if (rc != region->numLockedPages) {
+				kfree(pages);
+				region->numLockedPages = 0;
+
+				if (rc >= 0) {
+					rc = -EINVAL;
+				}
+			} else {
+				uint8_t *virtAddr = region->virtAddr;
+				size_t bytesRemaining;
+				int pageIdx;
+
+				rc = 0;	/* Since get_user_pages returns +ve number */
+
+				region->lockedPages = pages;
+
+				/* We've locked the user pages. Now we need to walk them and figure */
+				/* out the physical addresses. */
+
+				/* The first page may be partial */
+
+				dma_map_add_segment(memMap,
+						    region,
+						    virtAddr,
+						    PFN_PHYS(page_to_pfn
+							     (pages[0])) +
+						    firstPageOffset,
+						    firstPageSize);
+
+				virtAddr += firstPageSize;
+				bytesRemaining =
+				    region->numBytes - firstPageSize;
+
+				for (pageIdx = 1;
+				     pageIdx < region->numLockedPages;
+				     pageIdx++) {
+					size_t bytesThisPage =
+					    (bytesRemaining >
+					     PAGE_SIZE ? PAGE_SIZE :
+					     bytesRemaining);
+
+					DMA_MAP_PRINT
+					    ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+					     pageIdx, pages[pageIdx],
+					     page_to_pfn(pages[pageIdx]),
+					     PFN_PHYS(page_to_pfn
+						      (pages[pageIdx])));
+
+					dma_map_add_segment(memMap,
+							    region,
+							    virtAddr,
+							    PFN_PHYS(page_to_pfn
+								     (pages
+								      [pageIdx])),
+							    bytesThisPage);
+
+					virtAddr += bytesThisPage;
+					bytesRemaining -= bytesThisPage;
+				}
+			}
+#else
+			printk(KERN_ERR
+			       "%s: User mode pages are not yet supported\n",
+			       __func__);
+
+			/* user pages are not physically contiguous */
+
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	default:
+		{
+			printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+			       __func__, region->memType);
+
+			rc = -EINVAL;
+			break;
+		}
+	}
+
+	if (rc != 0) {
+		memMap->numRegionsUsed--;
+	}
+
+out:
+
+	DMA_MAP_PRINT("returning %d\n", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *mem,	/* Virtual address that we want to get a map of */
+		size_t numBytes,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	rc = dma_map_start(memMap, dir);
+	if (rc == 0) {
+		rc = dma_map_add_region(memMap, mem, numBytes);
+		if (rc < 0) {
+			/* Since the add fails, this function will fail, and the caller won't */
+			/* call unmap, so we need to do it here. */
+
+			dma_unmap(memMap, 0);
+		}
+	}
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+*   Setup a descriptor ring for a given memory map.
+*
+*   It is assumed that the descriptor ring has already been initialized, and
+*   this routine will only reallocate a new descriptor ring if the existing
+*   one is too small.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    ) {
+	int rc;
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+	dma_addr_t srcPhysAddr;
+	dma_addr_t dstPhysAddr;
+	int regionIdx;
+	int segmentIdx;
+
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	down(&memMap->lock);
+
+	/* Figure out how many descriptors we need */
+
+	numDescriptors = 0;
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_calculate_descriptor_count(dev, srcPhysAddr,
+							    dstPhysAddr,
+							    segment->
+							    numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_calculate_descriptor_count failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+			numDescriptors += rc;
+		}
+	}
+
+	/* Adjust the size of the ring, if it isn't big enough */
+
+	if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+		dma_free_descriptor_ring(&devAttr->ring);
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	} else {
+		rc =
+		     dma_init_descriptor_ring(&devAttr->ring,
+					      numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_init_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	}
+
+	/* Populate the descriptors */
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_add_descriptors(&devAttr->ring, dev,
+						 srcPhysAddr, dstPhysAddr,
+						 segment->numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_add_descriptors failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+		}
+	}
+
+	rc = 0;
+
+out:
+
+	up(&memMap->lock);
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    ) {
+	int regionIdx;
+	int segmentIdx;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			switch (region->memType) {
+			case DMA_MEM_TYPE_VMALLOC:
+				{
+					printk(KERN_ERR
+					       "%s: vmalloc'd pages are not yet supported\n",
+					       __func__);
+					return -EINVAL;
+				}
+
+			case DMA_MEM_TYPE_KMALLOC:
+				{
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+					dma_unmap_single(NULL,
+							 segment->physAddr,
+							 segment->numBytes,
+							 memMap->dir);
+#endif
+					break;
+				}
+
+			case DMA_MEM_TYPE_DMA:
+				{
+					dma_sync_single_for_cpu(NULL,
+								segment->
+								physAddr,
+								segment->
+								numBytes,
+								memMap->dir);
+					break;
+				}
+
+			case DMA_MEM_TYPE_USER:
+				{
+					/* Nothing to do here. */
+
+					break;
+				}
+
+			default:
+				{
+					printk(KERN_ERR
+					       "%s: Unsupported memory type: %d\n",
+					       __func__, region->memType);
+					return -EINVAL;
+				}
+			}
+
+			segment->virtAddr = NULL;
+			segment->physAddr = 0;
+			segment->numBytes = 0;
+		}
+
+		if (region->numLockedPages > 0) {
+			int pageIdx;
+
+			/* Some user pages were locked. We need to go and unlock them now. */
+
+			for (pageIdx = 0; pageIdx < region->numLockedPages;
+			     pageIdx++) {
+				struct page *page =
+				    region->lockedPages[pageIdx];
+
+				if (memMap->dir == DMA_FROM_DEVICE) {
+					SetPageDirty(page);
+				}
+				page_cache_release(page);
+			}
+			kfree(region->lockedPages);
+			region->numLockedPages = 0;
+			region->lockedPages = NULL;
+		}
+
+		region->memType = DMA_MEM_TYPE_NONE;
+		region->virtAddr = NULL;
+		region->numBytes = 0;
+		region->numSegmentsUsed = 0;
+	}
+	memMap->userTask = NULL;
+	memMap->numRegionsUsed = 0;
+	memMap->inUse = 0;
+
+	up(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
-- 
cgit v1.2.3


From 34559125742645843bc7639900c7b4737ec12b72 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:47 +0100
Subject: ARM: 5649/1: bcmring: add bcmring timer function

bcmring timer helper function, hardware register headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/timer.h | 77 ++++++++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/timex.h | 25 ++++++++++
 arch/arm/mach-bcmring/timer.c              | 62 ++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/timer.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/timex.h
 create mode 100644 arch/arm/mach-bcmring/timer.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 00000000000..5a94bbb032b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  timer.h
+*
+*  PURPOSE:
+*
+*
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+*  timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+*  timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+*  timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+*  timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 00000000000..40d033ec589
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 00000000000..2d415d2a8e6
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+	return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+	static int tickRateMsec;
+
+	if (tickRateMsec == 0) {
+		tickRateMsec = timer_get_tick_rate() / 1000;
+	}
+
+	return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+	return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
-- 
cgit v1.2.3


From 16f5875034fa9e36a72c4223c8ef42cfe461d766 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:21 +0100
Subject: ARM: 5650/1: bcmring: add io.h, uncompress. h, and entry-macro.S

add remaining header files in include/mach directory
add entry-macro.S file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/entry-macro.S | 86 ++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/io.h          | 56 +++++++++++++++
 arch/arm/mach-bcmring/include/mach/uncompress.h  | 43 ++++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-bcmring/include/mach/io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/uncompress.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 00000000000..7d393ca010a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(MM_IO_BASE_INTC0)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC0_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_INTC1)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC1_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_SINTC)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
+		cmp	\irqstat, #0
+		beq	1002f
+
+		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 00000000000..4db0eff9035
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c)        __raw_readb(c)
+#define readw(c)        __raw_readw(c)
+#define readl(c)        __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l)   __raw_readsb(p, d, l)
+#define readsw(p, d, l)   __raw_readsw(p, d, l)
+#define readsl(p, d, l)   __raw_readsl(p, d, l)
+
+#define writeb(v, c)     __raw_writeb(v, c)
+#define writew(v, c)     __raw_writew(v, c)
+#define writel(v, c)     __raw_writel(v, c)
+
+#define writesb(p, d, l)  __raw_writesb(p, d, l)
+#define writesw(p, d, l)  __raw_writesw(p, d, l)
+#define writesl(p, d, l)  __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l)    _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 00000000000..9c9821b7797
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	/* Send out UARTA */
+	while (BCMRING_UART_0_FR & (1 << 5))
+		;
+
+	BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+	/* Wait for the tx fifo to be empty */
+	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+		;
+
+	/* Wait for the final character to be sent on the txd line */
+	while (BCMRING_UART_0_FR & (1 << 3))
+		;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
-- 
cgit v1.2.3


From 7bab8bfc7f1060e3ab4bc0a90813a9338e6994b9 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:59 +0100
Subject: ARM: 5651/1: bcmring: csp capability header files

add mach-bcmring csp capability header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/csp/cap.h       |  63 ++++
 .../arm/mach-bcmring/include/mach/csp/cap_inline.h | 409 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h    |  73 ++++
 3 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 00000000000..30fa2d54063
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+	CAP_NOT_PRESENT = 0,
+	CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+	CAP_VPM,
+	CAP_ETH_PHY,
+	CAP_ETH_GMII,
+	CAP_ETH_SGMII,
+	CAP_USB,
+	CAP_TSC,
+	CAP_EHSS,
+	CAP_SDIO,
+	CAP_UARTB,
+	CAP_KEYPAD,
+	CAP_CLCD,
+	CAP_GE,
+	CAP_LEDM,
+	CAP_BBL,
+	CAP_VDEC,
+	CAP_PIF,
+	CAP_APM,
+	CAP_SPU,
+	CAP_PKA,
+	CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+	CAP_LCD_WVGA = 0,
+	CAP_LCD_VGA = 0x1,
+	CAP_LCD_WQVGA = 0x2,
+	CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 00000000000..933ce68ed90
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS          0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
+#define CAP_CONFIG0_USB0_DIS         0x00000080
+#define CAP_CONFIG0_USB1_DIS         0x00000100
+#define CAP_CONFIG0_TSC_DIS          0x00000200
+#define CAP_CONFIG0_EHSS0_DIS        0x00000400
+#define CAP_CONFIG0_EHSS1_DIS        0x00000800
+#define CAP_CONFIG0_SDIO0_DIS        0x00001000
+#define CAP_CONFIG0_SDIO1_DIS        0x00002000
+#define CAP_CONFIG0_UARTB_DIS        0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
+#define CAP_CONFIG0_CLCD_DIS         0x00010000
+#define CAP_CONFIG0_GE_DIS           0x00020000
+#define CAP_CONFIG0_LEDM_DIS         0x00040000
+#define CAP_CONFIG0_BBL_DIS          0x00080000
+#define CAP_CONFIG0_VDEC_DIS         0x00100000
+#define CAP_CONFIG0_PIF_DIS          0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
+
+#define CAP_CONFIG1_APMA_DIS         0x00000001
+#define CAP_CONFIG1_APMB_DIS         0x00000002
+#define CAP_CONFIG1_APMC_DIS         0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT   9
+#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS          0x00000010
+#define CAP_CONFIG2_PKA_DIS          0x00000020
+#define CAP_CONFIG2_RNG_DIS          0x00000080
+
+#if   (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+*  cap_isPresent -
+*
+*  PURPOSE:
+*     Determines if the chip has a certain capability present
+*
+*  PARAMETERS:
+*     capability - type of capability to determine if present
+*
+*  RETURNS:
+*     CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+	CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+	switch (capability) {
+	case CAP_VPM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_PHY:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_GMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_SGMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_USB:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_TSC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_EHSS:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SDIO:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_UARTB:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_KEYPAD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_CLCD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_GE:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_LEDM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_BBL:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_VDEC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PIF:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_APM:
+		{
+			if ((index == 0)
+			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 2)
+			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SPU:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PKA:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_RNG:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	default:
+		{
+		}
+		break;
+	}
+	return returnVal;
+}
+
+/****************************************************************************
+*  cap_getMaxArmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the ARM CPU
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+	return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxVpmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the VPM
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxLcdRes -
+*
+*  PURPOSE:
+*     Determines the maximum LCD resolution capabilities
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+	return (CAP_LCD_RES_T)
+		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+		 CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 00000000000..cfa91bed9d3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
+/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+  #if (CFG_GLOBAL_CHIP == FPGA11107)
+     #define HW_CFG_BUS_CLK_HZ            5000000
+     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
+     #define HW_CFG_DDR_PHY_OMIT
+     #define HW_CFG_UART_CLK_HZ           7500000
+  #else
+     #define HW_CFG_PLL_VCO_HZ           2000000000
+     #define HW_CFG_PLL2_VCO_HZ          1800000000
+     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
+     #define HW_CFG_BUS_CLK_HZ            166666666
+     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
+     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+     #define HW_CFG_UART_CLK_HZ           142857142
+     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
+  #endif
+#else
+   #define HW_CFG_PLL_VCO_HZ           1800000000
+   #define HW_CFG_PLL2_VCO_HZ          1800000000
+   #define HW_CFG_ARM_CLK_HZ            450000000
+   #define HW_CFG_BUS_CLK_HZ            150000000
+   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
+   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+   #define HW_CFG_UART_CLK_HZ           150000000
+   #define HW_CFG_VPM_CLK_HZ            300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
-- 
cgit v1.2.3


From 9133760f4b0c0628d45532aad17f59896cd7b57f Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:03:40 +0100
Subject: ARM: 5652/1: bcmring: add misc headers for csp code

add misc wrapper headers for csp code
add ddrc register header file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/cache.h        |  35 +
 arch/arm/mach-bcmring/include/csp/delay.h        |  36 +
 arch/arm/mach-bcmring/include/csp/errno.h        |  32 +
 arch/arm/mach-bcmring/include/csp/module.h       |  32 +
 arch/arm/mach-bcmring/include/csp/reg.h          | 114 +++
 arch/arm/mach-bcmring/include/csp/stdint.h       |  30 +
 arch/arm/mach-bcmring/include/csp/string.h       |  34 +
 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h | 872 +++++++++++++++++++++++
 8 files changed, 1185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/cache.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/delay.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/errno.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/module.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/reg.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/stdint.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/string.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 00000000000..caa20e59db9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 00000000000..8b3d8036729
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+   #include <linux/delay.h>
+#else
+   #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /*  CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 00000000000..51357dd5b66
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if   defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 00000000000..c30d2a5975a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+    #include <linux/module.h>
+#else
+    #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 00000000000..e5f60bf5a1f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    reg.h
+*
+*  @brief   Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x)      (*((volatile uint32_t *)(x)))
+#define __REG16(x)      (*((volatile uint16_t *)(x)))
+#define __REG8(x)       (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/*  typedef struct */
+/*  { */
+/*      uint32_t reg1;           offset 0x00 */
+/*      uint32_t reg2;           offset 0x04 */
+/*      uint32_t reg3;           offset 0x08 */
+/*      uint32_t reg4;           offset 0x0c */
+/*      REG32_RSVD(0x10, 0x20); */
+/*      uint32_t reg5;           offset 0x20 */
+/*      ... */
+/*  } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
+/* flags variable to be declared locally. */
+/* e.g. */
+/*    statement1; */
+/*    { */
+/*       REG_LOCAL_IRQ_SAVE; */
+/*       <multiple statements here> */
+/*       REG_LOCAL_IRQ_RESTORE; */
+/*    } */
+/*    statement2; */
+/*  */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
+	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg &= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg |= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+				     uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg = (*reg & mask) | value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+	*reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 00000000000..3a8718bbf70
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 00000000000..ad9e4005f14
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+   #include <linux/string.h>
+#else
+   #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 00000000000..f1b68e26fa6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    ddrcReg.h
+*
+*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t memcStatus;
+		uint32_t memcCmd;
+		uint32_t directCmd;
+		uint32_t memoryCfg;
+		uint32_t refreshPrd;
+		uint32_t casLatency;
+		uint32_t writeLatency;
+		uint32_t tMrd;
+		uint32_t tRas;
+		uint32_t tRc;
+		uint32_t tRcd;
+		uint32_t tRfc;
+		uint32_t tRp;
+		uint32_t tRrd;
+		uint32_t tWr;
+		uint32_t tWtr;
+		uint32_t tXp;
+		uint32_t tXsr;
+		uint32_t tEsr;
+		uint32_t memoryCfg2;
+		uint32_t memoryCfg3;
+		uint32_t tFaw;
+	} ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
+#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT                        0
+#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT                        0
+#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT                         0
+#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT                        0
+#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT                        0
+#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT                         0
+#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT                        0
+#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT                         0
+#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT                        0
+#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT                         0
+#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT                        0
+#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT                        0
+#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT                            16
+#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+	} ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
+#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT                           4
+#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+	} ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
+#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
+
+	typedef struct {
+		uint32_t input;
+		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+		uint32_t feature;
+	} ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
+#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t pmCtl;
+		 REG32_RSVD(0x0008, 0x0010);
+		uint32_t pllStatus;
+		uint32_t pllCfg;
+		uint32_t pllPreDiv;
+		uint32_t pllDiv;
+		uint32_t pllCtl1;
+		uint32_t pllCtl2;
+		uint32_t ssCtl;
+		uint32_t ssCfg;
+		uint32_t vdlStatic;
+		uint32_t vdlDynamic;
+		uint32_t padIdle;
+		uint32_t pvtComp;
+		uint32_t padDrive;
+		uint32_t clkRgltrCtl;
+	} ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT                       2
+#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t vdlCalibrate;
+		uint32_t vdlStatus;
+		 REG32_RSVD(0x000c, 0x0010);
+		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+		uint32_t readCtl;
+		uint32_t readStatus;
+		uint32_t readClear;
+		uint32_t padIdleCtl;
+		uint32_t padDriveCtl;
+		uint32_t padClkCtl;
+		uint32_t writeCtl;
+		uint32_t clkRegCtl;
+	} ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+	typedef struct {
+		uint32_t cfg;
+		uint32_t actMonCnt;
+		uint32_t ctl;
+		uint32_t lbistCtl;
+		uint32_t lbistSeed;
+		uint32_t lbistStatus;
+		uint32_t tieOff;
+		uint32_t actMonClear;
+		uint32_t status;
+		uint32_t user;
+	} ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+}				/* end extern "C" */
+#endif
+#endif				/* DDRC_REG_H */
-- 
cgit v1.2.3


From f1947c7a6717e437d9fe0e27a76bacf77f570d2d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:54 +0100
Subject: ARM: 5654/1: bcmring: add csp chipc hardware register file

add csp chipc hardware register file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_reg.h    | 530 +++++++++++++++++++++
 1 file changed, 530 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 00000000000..b162448f613
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_reg.h
+*
+*  @brief   Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
+
+typedef struct {
+	uint32_t ChipId;	/* Chip ID */
+	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
+	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
+	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
+	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
+	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
+	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
+	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
+	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
+	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
+	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
+
+	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
+	uint32_t OTPClock;	/* OTP Clock  (Divider) */
+	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
+	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
+	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
+	uint32_t pad1;
+	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
+	uint32_t TSCClock;	/* TSC Clock (Divider) */
+	uint32_t LEDClock;	/* LED Clock (Divider) */
+
+	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
+	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
+	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
+
+	uint32_t BusIntfClock;	/* Bus interface clock */
+
+	uint32_t PLLStatus;	/* PLL status register (PLL1) */
+	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
+	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
+	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
+	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
+	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
+
+	uint32_t I2S1Clock;	/* I2S1 Clock  */
+	uint32_t AudioEnable;	/* Enable/ disable audio channel */
+	uint32_t SoftReset1;	/* Reset blocks */
+	uint32_t SoftReset2;	/* Reset blocks */
+	uint32_t Spare1;	/* Phase align interrupts */
+	uint32_t Sticky;	/* Sticky bits */
+	uint32_t MiscCtrl;	/* Misc. control */
+	uint32_t pad3[3];
+
+	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
+	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
+	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
+	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
+	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
+	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
+
+	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
+	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
+	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
+	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
+	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
+	uint32_t pad4[9];
+
+	uint32_t SoftOTP1;	/* Software OTP control */
+	uint32_t SoftOTP2;	/* Software OTP control */
+	uint32_t SoftStraps;	/* Software strap */
+	uint32_t PinStraps;	/* Pin Straps */
+	uint32_t DiffOscCtrl;	/* Diff oscillator control */
+	uint32_t DiagsCtrl;	/* Diagnostic control */
+	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
+	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
+
+	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
+
+	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
+	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
+	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
+	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
+	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
+	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
+	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
+	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
+
+	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
+	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
+	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
+	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
+	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
+	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
+	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
+	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
+	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
+	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
+
+	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
+	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
+	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
+	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
+	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
+
+	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
+	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
+	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
+#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
+#define chipcHw_REG_REV_A0                              0xA00
+#define chipcHw_REG_REV_B0                              0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
+
+									   00000000 = divide-by-256
+									   00000001 = divide-by-1
+									   00000010 = divide-by-2
+									   00000011 = divide-by-3
+									   00000100 = divide-by-4
+									   00000101 = divide-by-5
+									   00000110 = divide-by-6
+									   .
+									   .
+									   11111011 = divide-by-251
+									   11111100 = divide-by-252
+									   11111101 = divide-by-253
+									   11111110 = divide-by-254
+									 */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
+#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+								   chipcHw_REG_PLL_DIVIDER_FRAC
+								   = 0, when SS is disable
+								 */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
+#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
+
+#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
+							/* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
+							/* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
+#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
+							/* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
+							/* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
+
+							/* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
+							/* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
+#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
+#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
+							/* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
+							/* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
+#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
+#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
+
+#endif /* CHIPCHW_REG_H */
-- 
cgit v1.2.3


From 2c4b57a204669a7b649f3eb891d3d0f0eba75321 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:05:37 +0100
Subject: ARM: 5655/1: bcmring: add csp chipc hardware definition file

add csp chipc hardware definition file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_def.h    | 1123 ++++++++++++++++++++
 1 file changed, 1123 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 00000000000..70eaea866cf
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN    0
+#define chipcHw_VPM_HW_PHASE_ALIGN    0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
+	chipcHw_CLOCK_ARM,	/* ARM Clock */
+	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
+	chipcHw_CLOCK_VPM,	/* VPM Clock */
+	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
+	chipcHw_CLOCK_UART,	/* UART Clock */
+	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
+	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
+	chipcHw_CLOCK_SPI,	/* SPI Clock */
+	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
+
+	chipcHw_CLOCK_BUS,	/* BUS Clock */
+	chipcHw_CLOCK_OTP,	/* OTP Clock */
+	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
+	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
+	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
+	chipcHw_CLOCK_APM100,	/* APM100 Clock */
+	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
+	chipcHw_CLOCK_LED,	/* LED Clock */
+
+	chipcHw_CLOCK_USB,	/* USB Clock */
+	chipcHw_CLOCK_LCD,	/* LCD CLock */
+	chipcHw_CLOCK_APM,	/* APM Clock */
+
+	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum  */
+typedef enum {
+	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
+	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
+						   If supported, call chipcHw_enableSpreadSpectrum ()
+						   to activate the spread spectrum with desired spread. */
+	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
+	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
+	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
+	uint32_t armBusRatio;	/* ARM clock : Bus clock */
+	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
+	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+									     /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
+#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
+#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
+#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
+#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
+#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
+#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
+#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
+#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
+#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL1
+*
+*  This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
+			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL2
+*
+*  This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success ( # of adjustment required )
+*            -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables core a clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get software override strap options
+*
+*  Retrieves software override strap options
+*
+*  @return   Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+*  @brief    Get pin strap options
+*
+*  Retrieves pin strap options
+*
+*  @return   Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Get valid pin strap options
+*
+*  Retrieves valid pin strap options
+*
+*  @return   valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
+					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual  pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/**  @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/**  @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+			   uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
-- 
cgit v1.2.3


From 4818a4727d787b2da0dc73c66f04d241626f4c97 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:13 +0100
Subject: ARM: 5656/1: bcmring: add csp chipc inline functions

add csp chipc inline functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_inline.h | 1673 ++++++++++++++++++++
 1 file changed, 1673 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 00000000000..c78833acb37
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
+	chipcHw_OPTYPE_OUTPUT	/* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+	return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+	if ((pChipcHw->
+	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+	return (pChipcHw->
+		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+		chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+	return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+	chipcHw_softResetEnable(mask);
+	chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	/* Deassert module soft reset */
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 ^= ctrl1;
+	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+	uint32_t unhold = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 |= ctrl1;
+	/* Mask out unhold request bits */
+	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+	/* Process unhold requests */
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+	}
+
+	if (unhold) {
+		/* Make sure unhold request is effective */
+		pChipcHw->SoftReset1 &= ~unhold;
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+	reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+	return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask & chipcHw_REG_STICKY_POR_BROM) {
+		bits |= chipcHw_REG_STICKY_POR_BROM;
+	} else {
+		uint32_t sticky;
+		sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+			bits |= chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask &
+	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+		uint32_t sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+			bits = chipcHw_REG_STICKY_BOOT_DONE;
+			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits | mask;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get software strap value
+*
+*  Retrieves software strap value
+*
+*  @return   Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+	return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+	reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Pin Strap Options
+*
+*  This function returns the raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+	return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Valid Strap Options
+*
+*  This function returns the valid raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+	uint32_t softStraps;
+
+	/*
+	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+	 ** which copies HW straps to soft straps if there is no override
+	 */
+	softStraps = chipcHw_getSoftStraps();
+
+	return softStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+	uint32_t softStraps;
+
+	REG_LOCAL_IRQ_SAVE;
+	softStraps = chipcHw_getSoftStraps();
+
+	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+		/* Copy HW straps to software straps */
+		chipcHw_setSoftStraps(chipcHw_getPinStraps());
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE2
+*
+*  This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE3
+*
+*  This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+		(chipcHw_REG_GPIO_MUX_MASK <<
+		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+	    chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+					      chipcHw_GPIO_FUNCTION_e func)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+					  chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+	    ~(chipcHw_REG_SLEW_RATE_MASK <<
+	      chipcHw_REG_SLEW_RATE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+					       chipcHw_PIN_CURRENT_STRENGTH_e
+					       curr)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+					   chipcHw_PIN_INPUTTYPE_e inputType)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+	    ~(chipcHw_REG_INPUTTYPE_MASK <<
+	      chipcHw_REG_INPUTTYPE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power up the USB PHY
+*
+*  This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power down the USB PHY
+*
+*  This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as host
+*
+*  This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as device
+*
+*  This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*
+*  This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode)
+{
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			/* PLL clock output enable/disable */
+			if (mode) {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock enable is inverted */
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			} else {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock disable is inverted */
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			/* PLL clock bypass enable/disable */
+			if (mode) {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	} else if (pClockCtrl) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+	/* Disable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable a core clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+	/* Enable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+	/* Enable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+	/* Disable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+	return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig2,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig2,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig2 |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+	REG_LOCAL_IRQ_SAVE;
+	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	} else {
+		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	}
+	pChipcHw->VPMPhaseCtrl2 =
+	    (pChipcHw->
+	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->DDRPhaseCtrl1 &=
+		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->DDRPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMPhaseCtrl1 &=
+		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->VPMPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &=
+	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->DDRPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &=
+	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->VPMPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
-- 
cgit v1.2.3


From 638ee2db1916de4da144f0ed6d156181ede20a41 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:47 +0100
Subject: ARM: 5657/1: bcmring: add csp chipc block source code

add csp chipc block source code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/chipc/Makefile        |   1 +
 arch/arm/mach-bcmring/csp/chipc/chipcHw.c       | 776 ++++++++++++++++++++++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c  | 293 +++++++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c | 124 ++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c   |  64 ++
 5 files changed, 1258 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 00000000000..673952768ee
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 00000000000..b3a61d860c6
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw.c
+*
+*  @brief   Low level Various CHIP clock controlling routines
+*
+*  @note
+*
+*   These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK                      1	/* PLL Clock */
+#define NON_PLL_CLOCK                  2	/* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+	} else {
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz =
+	    chipcHw_XTAL_FREQ_Hz *
+		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Obtain PLL clock frequency */
+		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (clock == chipcHw_CLOCK_DDR) {
+			/* DDR frequency is configured in PLLDivider register */
+			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				vcoHz >>= 1;
+			}
+			/* Obtain PLL clock frequency using VCO dividers */
+			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+	} else if (pClockCtrl) {
+		/* Obtain divider clock frequency */
+		uint32_t div;
+		uint32_t freq = 0;
+
+		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (pDependentClock) {
+			/* Identify the dependent clock frequency */
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+					/* Use crystal clock frequency when dependent PLL clock is bypassed */
+					freq = chipcHw_XTAL_FREQ_Hz;
+				} else {
+					/* Obtain PLL clock frequency using VCO dividers */
+					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+					freq = div ? chipcHw_divide(vcoHz, div) : 0;
+				}
+				break;
+			case NON_PLL_CLOCK:
+				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+				} else {
+					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+						/* Use crystal clock frequency when dependent divider clock is bypassed */
+						freq = chipcHw_XTAL_FREQ_Hz;
+					} else {
+						/* Obtain divider clock frequency using XTAL dividers */
+						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+					}
+				}
+				break;
+			}
+		} else {
+			/* Dependent on crystal clock */
+			freq = chipcHw_XTAL_FREQ_Hz;
+		}
+
+		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+		return chipcHw_divide(freq, (div ? div : 256));
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+	uint32_t desVcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+		/* Desired VCO frequency */
+		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+	} else {
+		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		/* Configure the DDR_ctrl:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		/* Configure the VPM:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Select XTAL as bypass source */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* For DDR settings use only the PLL divider clock */
+		if (pPLLReg == &pChipcHw->DDRClock) {
+			/* Set M1DIV for PLL1, which controls the DDR clock */
+			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				desVcoHz >>= 1;
+				vcoHz >>= 1;
+			}
+			/* Set MDIV to change the frequency */
+			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+		/* Wait for for atleast 200ns as per the protocol to change frequency */
+		udelay(1);
+		/* Do not bypass */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* Return the configured frequency */
+		return freq;
+	} else if (pClockCtrl) {
+		uint32_t divider = 0;
+
+		/* Divider clock should not be bypassed  */
+		reg32_modify_and(pClockCtrl,
+				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+		/* Identify the clock source */
+		if (pDependentClock) {
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+				break;
+			case NON_PLL_CLOCK:
+				{
+					uint32_t sourceClock = 0;
+
+					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+					} else {
+						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+					}
+					divider = chipcHw_divide(sourceClock, freq);
+				}
+				break;
+			}
+		} else {
+			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+		}
+
+		if (divider) {
+			REG_LOCAL_IRQ_SAVE;
+			/* Set the divider to obtain the required frequency */
+			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+			REG_LOCAL_IRQ_RESTORE;
+			return freq;
+		}
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+	uint32_t phaseControl;
+	uint32_t phaseValue;
+	uint32_t prevPhaseComp;
+	int iter = 0;
+	int adjustCount = 0;
+	int count = 0;
+
+	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+		phaseValue = 0;
+		prevPhaseComp = 0;
+
+		/* Step 1: Look for falling PH_COMP transition */
+
+		/* Read the contents of VPM Clock resgister */
+		phaseValue = pChipcHw->VPMClock;
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
+			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
+			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
+		    );
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl + 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 5) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 3) {
+			/* Detected noisy transition */
+			continue;
+		}
+
+		/* Step 4: Keep moving backward before the original transition took place. */
+
+		for (count = 0; (count < 5); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 5: Re discover the valid transition */
+
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^=
+			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
+			return -1;
+		} else {
+			/* Valid phase must have detected */
+			break;
+		}
+	}
+
+	/* For VPM Phase should be perfectly aligned. */
+	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+		/* Load new phase value */
+		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+	/* Return the status */
+	return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+		return vpmPhaseAlignA0();
+	} else {
+		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+		uint32_t phaseValue = 0;
+		int adjustCount = 0;
+
+		/* Disable VPM access */
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+		/* Disable HW VPM phase alignment  */
+		chipcHw_vpmHwPhaseAlignDisable();
+		/* Enable SW VPM phase alignment  */
+		chipcHw_vpmSwPhaseAlignEnable();
+		/* Adjust VPM phase */
+		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+			/* Adjust phase control value */
+			if (phaseValue > 0xF) {
+				/* Increment phase control value */
+				phaseControl++;
+			} else if (phaseValue < 0xF) {
+				/* Decrement phase control value */
+				phaseControl--;
+			} else {
+				/* Enable VPM access */
+				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+				/* Return adjust count */
+				return adjustCount;
+			}
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Count adjustment */
+			adjustCount++;
+		}
+	}
+
+	/* Disable VPM access */
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+	return -1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 00000000000..367df75d4bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_init.c
+*
+*  @brief   Low level CHIPC PLL configuration functions
+*
+*  @note
+*
+*   These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+    Calculation for NDIV_i to obtain VCO frequency
+    -----------------------------------------------
+
+	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+	for Freq_vco = VCO_FREQ_MHz
+		Freq_ref = chipcHw_XTAL_FREQ_Hz
+		PLL_P1 = PLL_P2 = 1
+		and
+		PLL_NDIV_f = 0
+
+	We get:
+		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+    -----------------------------------------------------------------
+		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL2
+*
+*  This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+	uint32_t pllPreDivider2 = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		pChipcHw->PLLConfig2 =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+
+		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider2 = pllPreDivider2;
+		/* Set NDIV Frac */
+		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+		/* This has to be removed once the default values are fixed for PLL2. */
+		pChipcHw->PLLControl12 = 0x38000700;
+		pChipcHw->PLLControl22 = 0x00000015;
+
+		/* Reset PLL2 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+		REG_LOCAL_IRQ_RESTORE;
+	}
+
+	/* Insert certain amount of delay before deasserting ARESET. */
+	udelay(1);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove analog reset and Power on the PLL */
+		pChipcHw->PLLConfig2 &=
+		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+		REG_LOCAL_IRQ_RESTORE;
+
+	}
+
+	/* Wait until PLL is locked */
+	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+		;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove digital reset */
+		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL1
+*
+*  This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+	uint32_t pllPreDivider = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->PLLConfig =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+		/* Setting VCO frequency */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pllPreDivider =
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		} else {
+			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		}
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider = pllPreDivider;
+		/* Set NDIV Frac */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+		} else {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
+		}
+
+		/* Reset PLL1 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+
+		REG_LOCAL_IRQ_RESTORE;
+
+		/* Insert certain amount of delay before deasserting ARESET. */
+		udelay(1);
+
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Remove analog reset and Power on the PLL */
+			pChipcHw->PLLConfig &=
+			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+
+		/* Wait until PLL is locked */
+		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+		       || !(pChipcHw->
+			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+			;
+
+		/* Remove digital reset */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+			REG_LOCAL_IRQ_RESTORE;
+		}
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the chipc module
+*
+*  This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+	delay_init();
+#endif
+
+	/* Do not program PLL, when warm reset */
+	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+				   initParam->ssSupport);
+		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+	} else {
+		/* Clear sticky bits */
+		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+	}
+	/* Clear sticky bits */
+	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+	pChipcHw->ACLKClock =
+	    (pChipcHw->
+	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+								 armBusRatio &
+								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+	/* Set various core component frequencies. The order in which this is done is important for some. */
+	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
+	/* then VPM and RTBUS. */
+
+	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+				  initParam->busClockFreqHz *
+				  initParam->armBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+				  initParam->busClockFreqHz *
+				  initParam->vpmBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+				  initParam->busClockFreqHz *
+				  initParam->ddrBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+				  initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 00000000000..2671d8896bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+*  @brief   warmReset
+*
+*  @note warmReset configures the clocks which are not reset back to the state
+*   required to execute on reset.  To do so we need to copy the code into internal
+*   memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+	int i = 0;
+	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+	/* Disable all interrupts */
+	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+		/* Bypass the PLL clocks before reboot */
+		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+		do {
+			((uint32_t *) MM_IO_BASE_ARAM)[i] =
+			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+			i++;
+		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+		CSP_CACHE_FLUSH_ALL;
+
+		/* run the function from ARAM */
+		runFunc();
+
+		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" BIC      r0,r0,#0xd                                            \n\t"
+		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#endif
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+		" MOV      r2,#0x80000000                                        \n\t"
+		" LDR      r3,[r2,#8]                                            \n\t"
+		" ORR      r3,r3,#0x20000                                        \n\t"
+		" STR      r3,[r2,#8]                                            \n\t"
+
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Issue reset */
+		" MOV      r3,#0x2                                               \n\t"
+		" STR      r3,[r2,#0x80]                                         \n\t"
+/* End here */
+		" MOV      pc,pc                                                 \n\t");
+/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 00000000000..54ad964fe94
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+*  @file    chipcHw_str.c
+*
+*  @brief   Contains strings which are useful to linux and csp
+*
+*  @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+	"GPIO",			/* 0 */
+	"KeyPad",		/* 1 */
+	"I2C-Host",		/* 2 */
+	"SPI",			/* 3 */
+	"Uart",			/* 4 */
+	"LED-Mtx-P",		/* 5 */
+	"LED-Mtx-S",		/* 6 */
+	"SDIO-0",		/* 7 */
+	"SDIO-1",		/* 8 */
+	"PCM",			/* 9 */
+	"I2S",			/* 10 */
+	"ETM",			/* 11 */
+	"Debug",		/* 12 */
+	"Misc",			/* 13 */
+	"0xE",			/* 14 */
+	"0xF",			/* 15 */
+};
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+		return "";
+	}
+
+	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
-- 
cgit v1.2.3


From 1a4a561bdd838b4455d57edf0deaf83e894d795e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:07:22 +0100
Subject: ARM: 5658/1: bcmring: add csp dmac header files

add csp dmac header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/dmacHw.h         | 596 +++++++++++++++++++++
 .../mach-bcmring/include/mach/csp/dmacHw_priv.h    | 145 +++++
 .../arm/mach-bcmring/include/mach/csp/dmacHw_reg.h | 406 ++++++++++++++
 3 files changed, 1147 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/dmacHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 00000000000..5d510130a25
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.h
+*
+*  @brief   API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+   System specific channel ID should be defined as follows
+
+   For example:
+
+   #include <dmacHw.h>
+   ...
+   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
+   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
+   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
+   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
+   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
+   ...
+   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
+   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
+   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
+   ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
+
+typedef enum {
+	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
+	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
+	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
+	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
+	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
+	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
+	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
+	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
+	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
+	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
+	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
+	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
+	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
+	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
+	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
+	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
+	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
+	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
+	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
+	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
+	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
+	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
+typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
+				   "dmacHw_MAKE_CHANNEL_ID" macro
+				 */
+/* DMA channel configuration parameters */
+typedef struct {
+	uint32_t srcPeripheralPort;	/* Source peripheral port */
+	uint32_t dstPeripheralPort;	/* Destination peripheral port */
+	uint32_t srcStatusRegisterAddress;	/* Source status register address */
+	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
+
+	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
+	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
+	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
+	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
+	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
+					   0 = Maximum possible.
+					 */
+
+	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
+	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
+	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
+	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
+	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
+	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
+	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
+	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
+	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
+	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
+	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
+	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
+	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
+	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
+	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
+*       is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*  [ IN ] Length in bytes   */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
+				uint32_t control	/*  [ IN ] Device control information */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMA transferred to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
+			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			       void **ppBbuf,	/*  [ OUT ] Data received */
+			       size_t *pLlen	/*  [ OUT ] Length of the data received */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will form the descriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
+				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*  [ IN ] Number of descriptor to set */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  -1  - On failure
+*            0  - On success
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*           of type dmacHw_INTERRUPT_STATUS_e
+*  @note
+*           This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			       void *userData	/*  [ IN ] User data  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*
+*  @return  void
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 00000000000..375066ad018
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_priv.h
+*
+*  @brief   Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+	uint32_t sar;		/* Source Adress Register.
+				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
+	uint32_t dar;		/* Destination Address Register.
+				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
+	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+				   Address MUST be aligned to a 32-bit boundary.             */
+	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
+	uint32_t sstat;		/* Source Status Register */
+	uint32_t dstat;		/* Destination Status Register */
+	uint32_t devCtl;	/* Device specific control information */
+	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ *  Descriptor ring pointers
+ */
+typedef struct {
+	int num;		/* Number of link items */
+	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
+	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
+	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
+	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
+	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
+	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ *  DMA channel control block
+ */
+typedef struct {
+	uint32_t module;	/* DMA controller module (0-1) */
+	uint32_t channel;	/* DMA channel (0-7) */
+	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
+	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
+	void *userData;		/* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT          16
+#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
+#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE              4064
+#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+*  @brief   Get next available transaction width
+*
+*
+*  @return  On sucess  : Next avail able transaction width
+*           On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
+    ) {
+	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+	}
+
+	/* Default return  */
+	return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get number of bytes per transaction
+*
+*  @return  Number of bytes per transaction
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
+    ) {
+	int width = 1;
+	switch (tw) {
+	case dmacHw_SRC_TRANSACTION_WIDTH_8:
+		width = 1;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_16:
+	case dmacHw_DST_TRANSACTION_WIDTH_16:
+		width = 2;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_32:
+	case dmacHw_DST_TRANSACTION_WIDTH_32:
+		width = 4;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_64:
+	case dmacHw_DST_TRANSACTION_WIDTH_64:
+		width = 8;
+		break;
+	default:
+		dmacHw_ASSERT(0);
+	}
+
+	/* Default transaction width */
+	return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 00000000000..891cea87e33
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_reg.h
+*
+*  @brief   Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
+	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+	dmacHw_REG64_t ChannelSar;	/*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.SRC_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.DST_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
+					   LLP contains the pointer to the next LLI for block chaining using linked lists.
+					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
+					   Address MUST be aligned to a 32-bit boundary.
+					 */
+	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
+	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
+	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
+	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
+	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
+	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
+	dmacHw_REG64_t SrcGather;	/* Source gather register */
+	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
+	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
+	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
+	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
+	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
+	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
+	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
+	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
+	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
+	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
+	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
+	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
+	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
+	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
+	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
+	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
+	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
+	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
+	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
+	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
+	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
+	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
+	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
+	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
+	dmacHw_REG64_t Reserved0;	/* Reserved */
+	dmacHw_REG64_t Reserved1;	/* Reserved */
+	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
+	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
+	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
+	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
+	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
+	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
+	dmacHw_REG64_t CompId;	/* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
+#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
-- 
cgit v1.2.3


From cf2ddacb567e85f40241f67b240fa445db7a424d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:08:00 +0100
Subject: ARM: 5659/1: bcmring: add csp dmac source files

add csp dmac source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/dmac/Makefile       |    1 +
 arch/arm/mach-bcmring/csp/dmac/dmacHw.c       |  917 ++++++++++++++++++++++
 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c | 1017 +++++++++++++++++++++++++
 3 files changed, 1935 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 00000000000..fb1104fe56b
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 00000000000..7b9bac2d79a
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.c
+*
+*  @brief   Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+*  @brief   Get maximum FIFO for a DMA channel
+*
+*  @return  Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	uint32_t val = 0;
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_MISC_t *pMiscReg =
+	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+	switch (pCblk->channel) {
+	case 0:
+		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+		break;
+	case 1:
+		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+		break;
+	case 2:
+		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+		break;
+	case 3:
+		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+		break;
+	case 4:
+		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+		break;
+	case 5:
+		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+		break;
+	case 6:
+		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+		break;
+	case 7:
+		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+		break;
+	}
+
+	if (val <= 0x4) {
+		return 8 << val;
+	} else {
+		dmacHw_ASSERT(0);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pProg;
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Not safe yet to program the channel */
+		return;
+	}
+
+	if (pCblk->varDataStarted) {
+		if (pCblk->descUpdated) {
+			pCblk->descUpdated = 0;
+			pProg =
+			    (dmacHw_DESC_t *) ((uint32_t)
+					       dmacHw_REG_LLP(pCblk->module,
+							      pCblk->channel) +
+					       pRing->virt2PhyOffset);
+
+			/* Load descriptor if not loaded */
+			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+					       pProg->sar);
+				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+					       pProg->dar);
+				dmacHw_REG_CTL_LO(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.lo;
+				dmacHw_REG_CTL_HI(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.hi;
+			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+				/* Return as end descriptor is processed */
+				return;
+			} else {
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			return;
+		}
+	} else {
+		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+			/* Do not make a single chain, rather process one descriptor at a time */
+			pProg = pRing->pHead;
+			/* Point to the next descriptor for next iteration */
+			dmacHw_NEXT_DESC(pRing, pHead);
+		} else {
+			/* Return if no more pending descriptor */
+			if (pRing->pEnd == NULL) {
+				return;
+			}
+
+			pProg = pRing->pProg;
+			if (pConfig->transferMode ==
+			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
+				/* Make sure a complete ring can be formed */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+					      llp == pRing->pProg);
+				/* Make sure pProg pointing to the pHead */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+					      pRing->pHead);
+				/* Make a complete ring */
+				do {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				} while (pRing->pProg != pRing->pHead);
+			} else {
+				/* Make a single long chain */
+				while (pRing->pProg != pRing->pEnd) {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				}
+			}
+		}
+
+		/* Program the channel registers */
+		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+		    pProg->ctl.lo;
+		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+		    pProg->ctl.hi;
+		if (pRing->pEnd) {
+			/* Remember the descriptor to use next */
+			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+		}
+		/* Indicate no more pending descriptor  */
+		pRing->pEnd = (dmacHw_DESC_t *) NULL;
+	}
+	/* Start DMA operation */
+	dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+	uint32_t i = 0;
+
+	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+	/* Enable access to the DMA block */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+		dmacHw_ASSERT(0);
+	}
+
+	memset((void *)dmacHw_gCblk, 0,
+	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+	for (i = 0; i < dmaChannelCount_0; i++) {
+		dmacHw_gCblk[i].module = 0;
+		dmacHw_gCblk[i].channel = i;
+	}
+	for (i = 0; i < dmaChannelCount_1; i++) {
+		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+	/* Disable access to the DMA block */
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    ) {
+	int idx;
+
+	switch ((channelId >> 8)) {
+	case 0:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+		idx = (channelId & 0xff);
+		break;
+	case 1:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+		idx = dmaChannelCount_0 + (channelId & 0xff);
+		break;
+	default:
+		dmacHw_ASSERT(0);
+		return (dmacHw_HANDLE_t) -1;
+	}
+
+	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	int module = pCblk->module;
+	int channel = pCblk->channel;
+
+	/* Reinitialize the control block */
+	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+	pCblk->module = module;
+	pCblk->channel = channel;
+
+	/* Enable DMA controller */
+	dmacHw_DMA_ENABLE(pCblk->module);
+	/* Reset DMA channel */
+	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Mask event specific interrupts */
+	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
+    ) {
+	/* Need extra 4 byte to ensure 32 bit alignment  */
+	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+		sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+*       accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    ) {
+	uint32_t i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	/* Check the alignment of the descriptor */
+	if ((uint32_t) pDescriptorVirt & 0x00000003) {
+		dmacHw_ASSERT(0);
+		return -1;
+	}
+
+	/* Check if enough space has been allocated for descriptor ring */
+	if (len < dmacHw_descriptorLen(num)) {
+		return -1;
+	}
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+	pRing->pHead =
+	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+	/* Initialize link item chain, starting from the head */
+	pDesc = pRing->pHead;
+	/* Find the offset between virtual to physical address */
+	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+	/* Form the descriptor ring */
+	for (i = 0; i < num - 1; i++) {
+		/* Clear link list item */
+		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+		/* Point to the next item in the physical address */
+		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+		/* Point to the next item in the virtual address */
+		pDesc->llp = (uint32_t) (pDesc + 1);
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+
+	/* Clear last link list item */
+	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+	/* Last item pointing to the first item in the
+	   physical address to complete the ring */
+	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+	/* Last item pointing to the first item in the
+	   virtual address to complete the ring
+	 */
+	pDesc->llp = (uint32_t) pRing->pHead;
+	/* Mark descriptor is ready to use */
+	pDesc->ctl.hi = dmacHw_DESC_FREE;
+	/* Set the number of descriptors in the ring */
+	pRing->num = num;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	uint32_t cfgHigh = 0;
+	int srcTrSize;
+	int dstTrSize;
+
+	pCblk->varDataStarted = 0;
+	pCblk->userData = NULL;
+
+	/* Configure
+	   - Burst transaction when enough data in available in FIFO
+	   - AHB Access protection 1
+	   - Source and destination peripheral ports
+	 */
+	cfgHigh =
+	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+	    dmacHw_SRC_PERI_INTF(pConfig->
+				 srcPeripheralPort) |
+	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+	/* Set priority */
+	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+				    pConfig->channelPriority);
+
+	if (pConfig->dstStatusRegisterAddress != 0) {
+		/* Destination status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+		/* Configure status registers */
+		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->dstStatusRegisterAddress);
+	}
+
+	if (pConfig->srcStatusRegisterAddress != 0) {
+		/* Source status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+		/* Source status update enable */
+		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->srcStatusRegisterAddress);
+	}
+	/* Configure the config high register */
+	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Configure block interrupt */
+	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure complete transfer interrupt */
+	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure error interrupt */
+	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure gather register */
+	if (pConfig->srcGatherWidth) {
+		srcTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+		if (!
+		    ((pConfig->srcGatherWidth % srcTrSize)
+		     && (pConfig->srcGatherJump % srcTrSize))) {
+			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->srcGatherWidth /
+			      srcTrSize) << 20) | (pConfig->srcGatherJump /
+						   srcTrSize);
+		} else {
+			return -1;
+		}
+	}
+	/* Configure scatter register */
+	if (pConfig->dstScatterWidth) {
+		dstTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+		if (!
+		    ((pConfig->dstScatterWidth % dstTrSize)
+		     && (pConfig->dstScatterJump % dstTrSize))) {
+			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->dstScatterWidth /
+			      dstTrSize) << 20) | (pConfig->dstScatterJump /
+						   dstTrSize);
+		} else {
+			return -1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_BUSY;
+	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+		   (0x00000001 << pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_ERROR;
+	}
+
+	return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+	dmacHw_DESC_t *pProg;
+	int srcTs = 0;
+	int blkTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int count = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if ((pConfig->srcGatherWidth % srcTrSize)
+	    || (pConfig->dstScatterWidth % dstTrSize)) {
+		return -2;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	/* Check the availability of "descCount" discriptors in the ring */
+	pProg = pRing->pHead;
+	for (count = 0; (descCount <= pRing->num) && (count < descCount);
+	     count++) {
+		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+			/* Sufficient descriptors are not available */
+			return -3;
+		}
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	}
+
+	/* Remember the link list item to program the channel registers */
+	pStart = pProg = pRing->pHead;
+	/* Make a link list with "descCount(=count)" number of descriptors */
+	while (count) {
+		/* Reset channel control information */
+		pProg->ctl.lo = 0;
+		/* Enable source gather if configured */
+		if (pConfig->srcGatherWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+		}
+		/* Enable destination scatter if configured */
+		if (pConfig->dstScatterWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+		}
+		/* Set source and destination address */
+		pProg->sar = (uint32_t) pSrcAddr;
+		pProg->dar = (uint32_t) pDstAddr;
+		/* Use "devCtl" to mark that user memory need to be freed later if needed */
+		if (pProg == pRing->pHead) {
+			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+		} else {
+			pProg->devCtl = 0;
+		}
+
+		blkTs = srcTs;
+
+		/* Special treatmeant for last descriptor */
+		if (count == 1) {
+			/* Mark the last descriptor */
+			pProg->ctl.lo &=
+			    ~(dmacHw_REG_CTL_LLP_DST_EN |
+			      dmacHw_REG_CTL_LLP_SRC_EN);
+			/* Treatment for odd data bytes */
+			if (oddSize) {
+				/* Adjust for single byte transaction width */
+				switch (pConfig->transferType) {
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs =
+					    (oddSize / srcTrSize) +
+					    ((oddSize % srcTrSize) ? 1 : 0);
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+					/* Do not adjust the transaction width  */
+					break;
+				}
+			} else {
+				srcTs -= blkTs;
+			}
+		} else {
+			if (srcTs / maxBlockSize) {
+				blkTs = maxBlockSize;
+			}
+			/* Remaining source transactions for next iteration */
+			srcTs -= blkTs;
+		}
+		/* Must have a valid source transactions */
+		dmacHw_ASSERT(blkTs > 0);
+		/* Set control information */
+		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+			pProg->ctl.lo |= pConfig->transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		} else {
+			uint32_t transferType = 0;
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+			pProg->ctl.lo |= transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		}
+
+		/* Set block transaction size */
+		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		/* Look for next descriptor */
+		if (count > 1) {
+			/* Point to the next descriptor */
+			pProg = (dmacHw_DESC_t *) pProg->llp;
+
+			/* Update source and destination address for next iteration */
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+				/* Do not adjust the address */
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			/* At the end of transfer "srcTs" must be zero */
+			dmacHw_ASSERT(srcTs == 0);
+		}
+		count--;
+	}
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pStart;
+	}
+	/* Indicate that the descriptor is updated */
+	pRing->pEnd = pProg;
+	/* Head pointing to the next descriptor */
+	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+	/* Update Tail pointer if destination is a peripheral,
+	   because no one is going to read from the pTail
+	 */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	switch (attr) {
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+		return (1 <<
+			 (dmacHw_GET_MAX_BLOCK_SIZE
+			  (pCblk->module, pCblk->module) + 2)) - 8;
+	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+							   pCblk->channel);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+		return GetFifoSize(handle);
+	}
+	dmacHw_ASSERT(0);
+	return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 00000000000..ff7b436d093
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_extra.c
+*
+*  @brief   Extra Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display DMA registers
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
+				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
+				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	int chan;
+
+	(*fpPrint) ("Displaying register content \n\n");
+	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: misc config                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+	(*fpPrint) ("Module %d: misc test                           0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+	if (channel == -1) {
+		for (chan = 0; chan < 8; chan++) {
+			(*fpPrint)
+			    ("--------------------------------------------------\n");
+			(*fpPrint)
+			    ("Module %d: Channel %d Source                   0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Destination              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d LLP                      0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (LO)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (HI)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats               0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (LO)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (HI)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+		}
+	} else {
+		chan = channel;
+		(*fpPrint)
+		    ("--------------------------------------------------\n");
+		(*fpPrint)
+		    ("Module %d: Channel %d Source                   0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Destination              0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d LLP                      0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (LO)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (HI)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats             0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats               0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (LO)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (HI)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display descriptor ring
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+
+	if (pRing->pHead == NULL) {
+		return;
+	}
+
+	pStart = pRing->pHead;
+
+	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+		if (pStart == pRing->pHead) {
+			(*fpPrint) ("Head\n");
+		}
+		if (pStart == pRing->pTail) {
+			(*fpPrint) ("Tail\n");
+		}
+		if (pStart == pRing->pProg) {
+			(*fpPrint) ("Prog\n");
+		}
+		if (pStart == pRing->pEnd) {
+			(*fpPrint) ("End\n");
+		}
+		if (pStart == pRing->pFree) {
+			(*fpPrint) ("Free\n");
+		}
+		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+		pStart = (dmacHw_DESC_t *) pStart->llp;
+	}
+	if (pStart == pRing->pHead) {
+		(*fpPrint) ("Head\n");
+	}
+	if (pStart == pRing->pTail) {
+		(*fpPrint) ("Tail\n");
+	}
+	if (pStart == pRing->pProg) {
+		(*fpPrint) ("Prog\n");
+	}
+	if (pStart == pRing->pEnd) {
+		(*fpPrint) ("End\n");
+	}
+	if (pStart == pRing->pFree) {
+		(*fpPrint) ("Free\n");
+	}
+	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check if DMA channel is the flow controller
+*
+*  @return  1 : If DMA is a flow controler
+*           0 : Peripheral is the flow controller
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	uint32_t ttfc =
+	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+	    lo & dmacHw_REG_CTL_TTFC_MASK;
+
+	switch (ttfc) {
+	case dmacHw_REG_CTL_TTFC_MM_DMAC:
+	case dmacHw_REG_CTL_TTFC_MP_DMAC:
+	case dmacHw_REG_CTL_TTFC_PM_DMAC:
+	case dmacHw_REG_CTL_TTFC_PP_DMAC:
+		return 1;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_DESC_t *pProg;
+	dmacHw_DESC_t *pHead;
+	int srcTs = 0;
+	int srcTrSize = 0;
+
+	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+	pProg = pHead;
+
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+	srcTs = dataLen / srcTrSize;
+	do {
+		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	} while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*
+*  @return   void
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*
+*  @note
+*     Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_TRANS;
+	}
+	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+	}
+	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_ERROR;
+	}
+
+	return status;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+	uint32_t i;
+
+	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+		     ((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    ) {
+			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+		}
+	}
+	return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	int srcTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if (pConfig->srcGatherWidth % srcTrSize
+	    || pConfig->dstScatterWidth % dstTrSize) {
+		return -1;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	return descCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	/* Make sure channel is not busy */
+	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Check if pEnd is not processed */
+		if (pRing->pEnd) {
+			/* Something left for processing */
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	/* Stop the channel */
+	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  On failure : -1
+*           On success : Number of buffer freed
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t count = 0;
+
+	if (fpFree == NULL) {
+		return -1;
+	}
+
+	while ((pRing->pFree != pRing->pTail)
+	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+			/* Identify, which memory to free */
+			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+				(*fpFree) ((void *)pRing->pFree->dar);
+			} else {
+				/* Destination was a peripheral */
+				(*fpFree) ((void *)pRing->pFree->sar);
+			}
+			/* Unmark user memory to indicate it is freed */
+			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+		}
+		dmacHw_NEXT_DESC(pRing, pFree);
+
+		count++;
+	}
+
+	return count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will update the discriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor updated
+*
+*
+*  @note
+*     Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*   [ IN ] Number of descriptor to set */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_t *pProg = NULL;
+	dmacHw_DESC_t *pLast = NULL;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t dstAddr;
+	uint32_t controlParam;
+	int i;
+
+	dmacHw_ASSERT(pConfig->transferType ==
+		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+	if (num > pRing->num) {
+		return -1;
+	}
+
+	pLast = pRing->pEnd;	/* Last descriptor updated */
+	pProg = pRing->pHead;	/* First descriptor in the new list */
+
+	controlParam = pConfig->srcUpdate |
+	    pConfig->dstUpdate |
+	    pConfig->srcMaxTransactionWidth |
+	    pConfig->dstMaxTransactionWidth |
+	    pConfig->srcMasterInterface |
+	    pConfig->dstMasterInterface |
+	    pConfig->srcMaxBurstWidth |
+	    pConfig->dstMaxBurstWidth |
+	    dmacHw_REG_CTL_TTFC_PM_PERI |
+	    dmacHw_REG_CTL_LLP_DST_EN |
+	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+	for (i = 0; i < num; i++) {
+		/* Allocate Rx buffer only for idle descriptor */
+		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+		    ) {
+			/* Rx descriptor is not idle */
+			break;
+		}
+		/* Set source address */
+		pRing->pHead->sar = srcAddr;
+		if (fpAlloc) {
+			/* Allocate memory for buffer in descriptor */
+			dstAddr = (uint32_t) (*fpAlloc) (len);
+			/* Check the destination address */
+			if (dstAddr == 0) {
+				if (i == 0) {
+					/* Not a single descriptor is available */
+					return -1;
+				}
+				break;
+			}
+			/* Set destination address */
+			pRing->pHead->dar = dstAddr;
+		}
+		/* Set control information */
+		pRing->pHead->ctl.lo = controlParam;
+		/* Use "devCtl" to mark the memory that need to be freed later */
+		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+		/* Descriptor is now owned by the channel */
+		pRing->pHead->ctl.hi = 0;
+		/* Remember the descriptor last updated */
+		pRing->pEnd = pRing->pHead;
+		/* Update next descriptor */
+		dmacHw_NEXT_DESC(pRing, pHead);
+	}
+
+	/* Mark the end of the list */
+	pRing->pEnd->ctl.lo &=
+	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+	/* Connect the list */
+	if (pLast != pProg) {
+		pLast->ctl.lo |=
+		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+	}
+	/* Mark the descriptors are updated */
+	pCblk->descUpdated = 1;
+	if (!pCblk->varDataStarted) {
+		/* LLP must be pointing to the first descriptor */
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		/* Channel, handling variable data started */
+		pCblk->varDataStarted = 1;
+	}
+
+	return i;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMAed to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @param    handle     -
+*  @param    ppBbuf     -
+*  @param    pLen       -
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			       void **ppBbuf,	/*   [ OUT ] Data received */
+			       size_t *pLlen	/*   [ OUT ] Length of the data received */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	(void)handle;
+
+	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    (pRing->pTail == pRing->pHead)
+		    ) {
+			/* No receive data available */
+			*ppBbuf = (char *)NULL;
+			*pLlen = 0;
+
+			return 0;
+		}
+	}
+
+	/* Return read buffer and length */
+	*ppBbuf = (char *)pRing->pTail->dar;
+
+	/* Extract length of the received data */
+	if (DmaIsFlowController(pDescriptor)) {
+		uint32_t srcTrSize = 0;
+
+		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+			srcTrSize = 1;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+			srcTrSize = 2;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+			srcTrSize = 4;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+			srcTrSize = 8;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		/* Calculate length from the block size */
+		*pLlen =
+		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+		    srcTrSize;
+	} else {
+		/* Extract length from the source peripheral */
+		*pLlen = pRing->pTail->sstat;
+	}
+
+	/* Advance tail to next descriptor */
+	dmacHw_NEXT_DESC(pRing, pTail);
+
+	return 1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
+				uint32_t control	/*   [ IN ] Device control information */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (ctlAddress == 0) {
+		return -1;
+	}
+
+	/* Check the availability of descriptors in the ring */
+	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+		return -1;
+	}
+	/* Set control information */
+	pRing->pHead->devCtl = control;
+	/* Set source and destination address */
+	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+	pRing->pHead->dar = ctlAddress;
+	/* Set control parameters */
+	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+		pRing->pHead->ctl.lo = pConfig->transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+	} else {
+		uint32_t transferType = 0;
+		switch (pConfig->transferType) {
+		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+			break;
+		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		pRing->pHead->ctl.lo = transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface |
+		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+	}
+
+	/* Set block transaction size to one 32 bit transaction */
+	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pRing->pHead;
+	}
+	pRing->pEnd = pRing->pHead;
+
+	/* Advance the descriptor */
+	dmacHw_NEXT_DESC(pRing, pHead);
+
+	/* Update Tail pointer if destination is a peripheral */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       void *userData	/*  [ IN ] User data */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    ) {
+	int i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	pDesc = pRing->pHead;
+
+	for (i = 0; i < pRing->num; i++) {
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+	DisplayDescRing(pDescriptor, fpPrint);
+}
-- 
cgit v1.2.3


From 7ba09020287fa6c181707490ea7143abb3db55b1 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:09:49 +0100
Subject: ARM: 5660/1: bcmring: add csp timer block header and source files

add csp timer block header and source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/tmr/Makefile             |   1 +
 arch/arm/mach-bcmring/csp/tmr/tmrHw.c              | 576 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/csp/tmrHw.h          | 263 ++++++++++
 arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h |  82 +++
 4 files changed, 922 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/tmrHw.c
 create mode 100644 arch/arm/mach-bcmring/include/csp/tmrHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 00000000000..244a61ab769
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 00000000000..5c1c9a0e5ed
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.c
+*
+*  @brief   Low level Timer driver routines
+*
+*  @note
+*
+*   These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC              (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+    __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+) {
+	switch (capability) {
+	case tmrHw_CAPABILITY_CLOCK:
+		return (timerId <=
+			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+		    tmrHw_HIGH_RESOLUTION_CLOCK;
+	case tmrHw_CAPABILITY_RESOLUTION:
+		return 32;
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets a timer
+*
+*  This function initializes  timer
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
+) {
+	/* Reset timer */
+	pTmrHw[timerId].LoadValue = 0;
+	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+	pTmrHw[timerId].Control = 0;
+	pTmrHw[timerId].BackgroundLoad = 0;
+	/* Always configure as a 32 bit timer */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+	/* Clear interrupt only if raw status interrupt is set */
+	if (pTmrHw[timerId].RawInterruptStatus) {
+		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets counter value for an interval in ms
+*
+*  @return   On success: Effective counter value set
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	uint32_t scale = 0;
+	uint32_t count = 0;
+
+	if (timerId == 0 || timerId == 1) {
+		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+
+	} else if (timerId == 2 || timerId == 3) {
+		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+	}
+	return count / scale;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+) {
+	uint32_t resolution = 0;
+	uint32_t count = 0;
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+	/* Set timer in highest resolution */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+	if (rate && (timerId == 0 || timerId == 1)) {
+		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+			return 0;
+		}
+		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+	} else if (rate && (timerId == 2 || timerId == 3)) {
+		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+			return 0;
+		} else {
+			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+		}
+	} else {
+		return 0;
+	}
+	/* Find the counter value */
+	count = resolution / rate;
+	/* Set counter value */
+	pTmrHw[timerId].LoadValue = count;
+	pTmrHw[timerId].BackgroundLoad = count;
+
+	return resolution / count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode oneshot */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) {
+	uint32_t scale = 0;
+
+	ResetTimer(timerId);
+	/* Set timer as free running mode */
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	if (divider >= 64) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+		scale = 256;
+	} else if (divider >= 8) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+		scale = 16;
+	} else {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+		scale = 1;
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+	} else if (timerId == 2 || timerId == 3) {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	/* return 32 bit timer value */
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+	case tmrHw_CONTROL_FREE_RUNNING:
+		if (pTmrHw[timerId].CurrentValue) {
+			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+		}
+		break;
+	case tmrHw_CONTROL_PERIODIC:
+	case tmrHw_CONTROL_ONESHOT:
+		return pTmrHw[timerId].BackgroundLoad -
+		    pTmrHw[timerId].CurrentValue;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	uint32_t divider = 0;
+
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+	case tmrHw_CONTROL_PRESCALE_1:
+		divider = 1;
+		break;
+	case tmrHw_CONTROL_PRESCALE_16:
+		divider = 16;
+		break;
+	case tmrHw_CONTROL_PRESCALE_256:
+		divider = 256;
+		break;
+	default:
+		tmrHw_ASSERT(0);
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+	} else {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	if (pTmrHw[timerId].InterruptStatus) {
+		return tmrHw_INTERRUPT_STATUS_SET;
+	} else {
+		return tmrHw_INTERRUPT_STATUS_UNSET;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
+) {
+	int i;
+
+	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+		if (pTmrHw[i].InterruptStatus) {
+			return i;
+		}
+	}
+
+	return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+) {
+	(*fpPrint) ("Displaying register contents \n\n");
+	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
+		    pTmrHw[timerId].LoadValue);
+	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
+		    pTmrHw[timerId].BackgroundLoad);
+	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
+		    pTmrHw[timerId].Control);
+	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptClear);
+	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+		    pTmrHw[timerId].RawInterruptStatus);
+	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs /*  [ IN ] usec to delay */
+) {
+	tmrHw_RATE_t usec_tick_rate;
+	tmrHw_COUNT_t start_time;
+	tmrHw_COUNT_t delta_time;
+
+	start_time = tmrHw_GetCurrentCount(timerId);
+	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+	delta_time = usecs * usec_tick_rate;
+
+	/* Busy wait */
+	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+		;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 00000000000..f1236d00cb9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.h
+*
+*  @brief   API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t;	/* Timer ID */
+typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
+typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
+
+typedef enum {
+	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
+	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
+	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs	/*  [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 00000000000..3080ac7239a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw_reg.h
+*
+*  @brief   Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one   (Timer ID 0) runs at  25 MHz
+Timer two   (Timer ID 1) runs at  25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four  (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ          25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ         150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
+
+typedef struct {
+	uint32_t LoadValue;	/* Load value for timer */
+	uint32_t CurrentValue;	/* Current value for timer */
+	uint32_t Control;	/* Control register */
+	uint32_t InterruptClear;	/* Interrupt clear register */
+	uint32_t RawInterruptStatus;	/* Raw interrupt status */
+	uint32_t InterruptStatus;	/* Masked interrupt status */
+	uint32_t BackgroundLoad;	/* Background load value */
+	uint32_t padding;	/* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
+#define tmrHw_CONTROL_PERIODIC                0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1              0x00000000
+#define tmrHw_CONTROL_PRESCALE_16             0x00000004
+#define tmrHw_CONTROL_PRESCALE_256            0x00000008
+#define tmrHw_CONTROL_32BIT                   0x00000002
+#define tmrHw_CONTROL_ONESHOT                 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
-- 
cgit v1.2.3


From a364143127a3155153f3e93d47cfc0f99a6f1858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:10:24 +0100
Subject: ARM: 5661/1: bcmring: add csp security hardware headers

add csp security hardware headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/secHw.h          |  65 ++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h | 100 +++++++++++++++++++++
 .../mach-bcmring/include/mach/csp/secHw_inline.h   |  79 ++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/secHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 00000000000..b9d7e0732df
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw.h
+*
+*  @brief   Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
+	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+*  @brief   Requesting to execute the function in secure mode
+*
+*  This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Sets the  mode
+*
+*  his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE	/* Processor mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get the current mode
+*
+*  This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 00000000000..d15f5f3ec2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_def.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
+#define secHw_BLK_MASK_KEY_SCAN         0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
+#define secHw_BLK_MASK_UART0            0x00000008
+#define secHw_BLK_MASK_UART1            0x00000010
+#define secHw_BLK_MASK_WATCHDOG         0x00000020
+#define secHw_BLK_MASK_SPUM             0x00000040
+#define secHw_BLK_MASK_DDR2             0x00000080
+#define secHw_BLK_MASK_EXT_MEM          0x00000100
+#define secHw_BLK_MASK_ESW              0x00000200
+#define secHw_BLK_MASK_SPU              0x00010000
+#define secHw_BLK_MASK_PKA              0x00020000
+#define secHw_BLK_MASK_RNG              0x00040000
+#define secHw_BLK_MASK_RTC              0x00080000
+#define secHw_BLK_MASK_OTP              0x00100000
+#define secHw_BLK_MASK_BOOT             0x00200000
+#define secHw_BLK_MASK_MPU              0x00400000
+#define secHw_BLK_MASK_TZCTRL           0x00800000
+#define secHw_BLK_MASK_INTR             0x01000000
+
+/* Trustzone register set */
+typedef struct {
+	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
+	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
+	volatile uint32_t setSecure;	/* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+	secHw_IDX_LS = 0,
+	secHw_IDX_MS = 1,
+	secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 00000000000..9cd6a032ab7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_inline.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+	}
+
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+	}
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
-- 
cgit v1.2.3


From bc5739005f9c0585d21c78f61e9d7965f97b2109 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:17 +0100
Subject: ARM: 5653/1: bcmring: add Makefile of csp code

add Makefile of csp code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/Makefile | 3 +++
 1 file changed, 3 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/Makefile

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 00000000000..648c0377530
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
-- 
cgit v1.2.3


From 831f1f73a6e1a0a02a5eaa2da5f49cf09c7bb1af Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:49 +0100
Subject: ARM: 5642/1: bcmring: add Makefile/Kconfig/Makefile.boot in
 mach-bcmring

add arch/arm/mach-bcmring directory

add Kconfig, Makefile, and Makefile.boot in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/Kconfig       | 21 +++++++++++++++++++++
 arch/arm/mach-bcmring/Makefile      |  8 ++++++++
 arch/arm/mach-bcmring/Makefile.boot |  6 ++++++
 3 files changed, 35 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/Kconfig
 create mode 100644 arch/arm/mach-bcmring/Makefile
 create mode 100644 arch/arm/mach-bcmring/Makefile.boot

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 00000000000..457b4384913
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+	prompt "Processor selection in BCMRING family of devices"
+	depends on ARCH_BCMRING
+	default ARCH_BCM11107
+
+config ARCH_FPGA11107
+	bool "FPGA11107"
+
+config ARCH_BCM11107
+	bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+	depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+	hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 00000000000..f8d9fcedf91
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 00000000000..fb53b283beb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y      := $(CONFIG_BCM_ZRELADDR)
+params_phys-y   := 0x00000800
+
-- 
cgit v1.2.3


From 6288e28dce9bae24068b7341ebd72a7d176a3539 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:15 +0100
Subject: ARM: 5641/1: bcmring: add Kconfig and Makefile entries in arch/arm

add bcmring option in Kconfig and add entry in Makefile
in arch/arm directory

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig  | 14 ++++++++++++++
 arch/arm/Makefile |  1 +
 2 files changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c6d2b198875 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -637,6 +637,18 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -730,6 +742,8 @@ source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-bcmring/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..b9ae98b88a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -112,6 +112,7 @@ endif
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
-- 
cgit v1.2.3


From 7f33527f547161f5ddc05c252c81617b8de93f21 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Wed, 12 Aug 2009 22:07:26 +0100
Subject: ARM: 5670/1: bcmring: add default configuration for bcmring arch

add default configuration for bcmring arch

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/bcmring_defconfig | 725 +++++++++++++++++++++++++++++++++++++
 1 file changed, 725 insertions(+)
 create mode 100644 arch/arm/configs/bcmring_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 00000000000..bcc0bac551a
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 65305ae816ca17a38340aef0ccc92d0c127acccf Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 16 Aug 2009 00:53:56 +0900
Subject: sh: Convert cache disabled SH-5 over to new cache interface.

The caches enabled case needs more work, but is presently broken
regardless, so this can be done incrementally.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/page.h               |  8 --------
 arch/sh/include/cpu-sh5/cpu/cacheflush.h | 25 -------------------------
 arch/sh/mm/Makefile_64                   |  2 +-
 arch/sh/mm/tlbflush_64.c                 |  5 -----
 4 files changed, 1 insertion(+), 39 deletions(-)
 delete mode 100644 arch/sh/include/cpu-sh5/cpu/cacheflush.h

(limited to 'arch')

diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index a316eeb50b3..81bffc0d686 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -63,20 +63,12 @@ extern void copy_page(void *to, void *from);
 struct page;
 struct vm_area_struct;
 
-#if defined(CONFIG_CPU_SH5)
-extern void clear_user_page(void *to, unsigned long address, struct page *page);
-extern void copy_user_page(void *to, void *from, unsigned long address,
-			   struct page *page);
-
-#else
 extern void copy_user_highpage(struct page *to, struct page *from,
 			       unsigned long vaddr, struct vm_area_struct *vma);
 #define __HAVE_ARCH_COPY_USER_HIGHPAGE
 extern void clear_user_highpage(struct page *page, unsigned long vaddr);
 #define clear_user_highpage	clear_user_highpage
 
-#endif
-
 /*
  * These are used to make use of C type-checking..
  */
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
deleted file mode 100644
index 202f637a0e1..00000000000
--- a/arch/sh/include/cpu-sh5/cpu/cacheflush.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_SH_CPU_SH5_CACHEFLUSH_H
-#define __ASM_SH_CPU_SH5_CACHEFLUSH_H
-
-#ifndef __ASSEMBLY__
-
-extern void flush_cache_all(void);
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_sigtramp(unsigned long vaddr);
-extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-			      unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-extern void flush_dcache_page(struct page *pg);
-extern void flush_icache_range(unsigned long start, unsigned long end);
-
-/* XXX .. */
-extern void (*__flush_wback_region)(void *start, int size);
-extern void (*__flush_purge_region)(void *start, int size);
-extern void (*__flush_invalidate_region)(void *start, int size);
-
-#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
-#define flush_icache_page(vma, page)	do { } while (0)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */
diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64
index 4d5ed245ef4..dd104c4fffa 100644
--- a/arch/sh/mm/Makefile_64
+++ b/arch/sh/mm/Makefile_64
@@ -2,7 +2,7 @@
 # Makefile for the Linux SuperH-specific parts of the memory manager.
 #
 
-obj-y			:= init.o consistent.o mmap.o
+obj-y			:= cache.o consistent.o init.o kmap.o mmap.o
 
 mmu-y			:= nommu.o extable_32.o
 mmu-$(CONFIG_MMU)	:= fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fa5a95a062d..2dcc48528f7 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -470,8 +470,3 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
 }
-
-void __update_cache(struct vm_area_struct *vma,
-		    unsigned long address, pte_t pte)
-{
-}
-- 
cgit v1.2.3


From 1ee4ab09f38b77b3a5750429d456d6606b237924 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 16 Aug 2009 00:55:38 +0900
Subject: sh64: Build in support for generic stacktrace ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/Makefile_64 | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index 639ee514266..cdfec1e499a 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -1,8 +1,9 @@
 extra-y	:= head_64.o init_task.o vmlinux.lds
 
-obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
-	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
-	   syscalls_64.o time.o topology.o traps.o traps_64.o unwinder.o
+obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
+	   machvec.o process_64.o ptrace_64.o setup.o signal_64.o	\
+	   sys_sh.o sys_sh64.o syscalls_64.o time.o topology.o 		\
+	   traps.o traps_64.o unwinder.o
 
 obj-y				+= cpu/
 obj-$(CONFIG_SMP)		+= smp.o
-- 
cgit v1.2.3


From 94ecd224c940830e2f2724c3860eb7fb74c15d31 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 16 Aug 2009 01:50:17 +0900
Subject: sh: Fix up the SH-5 build with caches enabled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/system.h    |  14 +--
 arch/sh/include/asm/system_32.h |  10 ++
 arch/sh/include/asm/system_64.h |   5 +
 arch/sh/kernel/sh_ksyms_64.c    |   8 --
 arch/sh/mm/cache-sh5.c          | 249 ++++------------------------------------
 arch/sh/mm/flush-sh4.c          |  81 +++++--------
 6 files changed, 64 insertions(+), 303 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index ab79e1f4fbe..bf7c4cbde37 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -14,18 +14,6 @@
 
 #define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
 
-#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
-#define __icbi()			\
-{					\
-	unsigned long __addr;		\
-	__addr = 0xa8000000;		\
-	__asm__ __volatile__(		\
-		"icbi   %0\n\t"		\
-		: /* no output */	\
-		: "m" (__m(__addr)));	\
-}
-#endif
-
 /*
  * A brief note on ctrl_barrier(), the control register write barrier.
  *
@@ -44,7 +32,7 @@
 #define mb()		__asm__ __volatile__ ("synco": : :"memory")
 #define rmb()		mb()
 #define wmb()		__asm__ __volatile__ ("synco": : :"memory")
-#define ctrl_barrier()	__icbi()
+#define ctrl_barrier()	__icbi(0xa8000000)
 #define read_barrier_depends()	do { } while(0)
 #else
 #define mb()		__asm__ __volatile__ ("": : :"memory")
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index d7299d69ff7..5ddd2359f3e 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -63,6 +63,16 @@ do {									\
 #define __restore_dsp(tsk)	do { } while (0)
 #endif
 
+#if defined(CONFIG_CPU_SH4A)
+#define __icbi(addr)	__asm__ __volatile__ ( "icbi @%0\n\t" : : "r" (addr))
+#else
+#define __icbi(addr)	mb()
+#endif
+
+#define __ocbp(addr)	__asm__ __volatile__ ( "ocbp @%0\n\t" : : "r" (addr))
+#define __ocbi(addr)	__asm__ __volatile__ ( "ocbi @%0\n\t" : : "r" (addr))
+#define __ocbwb(addr)	__asm__ __volatile__ ( "ocbwb @%0\n\t" : : "r" (addr))
+
 struct task_struct *__switch_to(struct task_struct *prev,
 				struct task_struct *next);
 
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index 218b54d9d66..8e4a03e7966 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -37,6 +37,11 @@ do {								\
 #define jump_to_uncached()	do { } while (0)
 #define back_to_cached()	do { } while (0)
 
+#define __icbi(addr)	__asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr))
+#define __ocbp(addr)	__asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr))
+#define __ocbi(addr)	__asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr))
+#define __ocbwb(addr)	__asm__ __volatile__ ( "ocbwb %0, 0\n\t" : : "r" (addr))
+
 static inline reg_size_t register_align(void *val)
 {
 	return (unsigned long long)(signed long long)(signed long)val;
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index f96c95c07c4..d008e17eb25 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -30,14 +30,6 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
 EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(kernel_thread);
 
-#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU)
-EXPORT_SYMBOL(clear_user_page);
-#endif
-
-#ifndef CONFIG_CACHE_OFF
-EXPORT_SYMBOL(flush_dcache_page);
-#endif
-
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(screen_info);
 #endif
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index a8f5142dc2c..819e0f9e8db 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -25,29 +25,6 @@ extern void __weak sh4__flush_region_init(void);
 /* Wired TLB entry for the D-cache */
 static unsigned long long dtlb_cache_slot;
 
-void __init cpu_cache_init(void)
-{
-	/* Reserve a slot for dcache colouring in the DTLB */
-	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
-
-	sh4__flush_region_init();
-}
-
-void __init kmap_coherent_init(void)
-{
-	/* XXX ... */
-}
-
-void *kmap_coherent(struct page *page, unsigned long addr)
-{
-	/* XXX ... */
-	return NULL;
-}
-
-void kunmap_coherent(void)
-{
-}
-
 #ifdef CONFIG_DCACHE_DISABLED
 #define sh64_dcache_purge_all()					do { } while (0)
 #define sh64_dcache_purge_coloured_phy_page(paddr, eaddr)	do { } while (0)
@@ -233,52 +210,6 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
 	}
 }
 
-/*
- * Invalidate a small range of user context I-cache, not necessarily page
- * (or even cache-line) aligned.
- *
- * Since this is used inside ptrace, the ASID in the mm context typically
- * won't match current_asid.  We'll have to switch ASID to do this.  For
- * safety, and given that the range will be small, do all this under cli.
- *
- * Note, there is a hazard that the ASID in mm->context is no longer
- * actually associated with mm, i.e. if the mm->context has started a new
- * cycle since mm was last active.  However, this is just a performance
- * issue: all that happens is that we invalidate lines belonging to
- * another mm, so the owning process has to refill them when that mm goes
- * live again.  mm itself can't have any cache entries because there will
- * have been a flush_cache_all when the new mm->context cycle started.
- */
-static void sh64_icache_inv_user_small_range(struct mm_struct *mm,
-						unsigned long start, int len)
-{
-	unsigned long long eaddr = start;
-	unsigned long long eaddr_end = start + len;
-	unsigned long current_asid, mm_asid;
-	unsigned long flags;
-	unsigned long long epage_start;
-
-	/*
-	 * Align to start of cache line.  Otherwise, suppose len==8 and
-	 * start was at 32N+28 : the last 4 bytes wouldn't get invalidated.
-	 */
-	eaddr = L1_CACHE_ALIGN(start);
-	eaddr_end = start + len;
-
-	mm_asid = cpu_asid(smp_processor_id(), mm);
-	local_irq_save(flags);
-	current_asid = switch_and_save_asid(mm_asid);
-
-	epage_start = eaddr & PAGE_MASK;
-
-	while (eaddr < eaddr_end) {
-		__asm__ __volatile__("icbi %0, 0" : : "r" (eaddr));
-		eaddr += L1_CACHE_BYTES;
-	}
-	switch_and_save_asid(current_asid);
-	local_irq_restore(flags);
-}
-
 static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end)
 {
 	/* The icbi instruction never raises ITLBMISS.  i.e. if there's not a
@@ -564,7 +495,7 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
  * Invalidate the entire contents of both caches, after writing back to
  * memory any dirty data from the D-cache.
  */
-void flush_cache_all(void)
+static void sh5_flush_cache_all(void)
 {
 	sh64_dcache_purge_all();
 	sh64_icache_inv_all();
@@ -591,7 +522,7 @@ void flush_cache_all(void)
  * I-cache.  This is similar to the lack of action needed in
  * flush_tlb_mm - see fault.c.
  */
-void flush_cache_mm(struct mm_struct *mm)
+static void sh5_flush_cache_mm(struct mm_struct *mm)
 {
 	sh64_dcache_purge_all();
 }
@@ -603,8 +534,8 @@ void flush_cache_mm(struct mm_struct *mm)
  *
  * Note, 'end' is 1 byte beyond the end of the range to flush.
  */
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
+static void sh5_flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
 {
 	struct mm_struct *mm = vma->vm_mm;
 
@@ -621,8 +552,8 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
  *
  * Note, this is called with pte lock held.
  */
-void flush_cache_page(struct vm_area_struct *vma, unsigned long eaddr,
-		      unsigned long pfn)
+static void sh5_flush_cache_page(struct vm_area_struct *vma,
+		unsigned long eaddr, unsigned long pfn)
 {
 	sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
 
@@ -630,7 +561,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long eaddr,
 		sh64_icache_inv_user_page(vma, eaddr);
 }
 
-void flush_dcache_page(struct page *page)
+static void sh5_flush_dcache_page(struct page *page)
 {
 	sh64_dcache_purge_phy_page(page_to_phys(page));
 	wmb();
@@ -644,39 +575,20 @@ void flush_dcache_page(struct page *page)
  * mapping, therefore it's guaranteed that there no cache entries for
  * the range in cache sets of the wrong colour.
  */
-void flush_icache_range(unsigned long start, unsigned long end)
+static void sh5_flush_icache_range(unsigned long start, unsigned long end)
 {
 	__flush_purge_region((void *)start, end);
 	wmb();
 	sh64_icache_inv_kernel_range(start, end);
 }
 
-/*
- * Flush the range of user (defined by vma->vm_mm) address space starting
- * at 'addr' for 'len' bytes from the cache.  The range does not straddle
- * a page boundary, the unique physical page containing the range is
- * 'page'.  This seems to be used mainly for invalidating an address
- * range following a poke into the program text through the ptrace() call
- * from another process (e.g. for BRK instruction insertion).
- */
-static void flush_icache_user_range(struct vm_area_struct *vma,
-			struct page *page, unsigned long addr, int len)
-{
-
-	sh64_dcache_purge_coloured_phy_page(page_to_phys(page), addr);
-	mb();
-
-	if (vma->vm_flags & VM_EXEC)
-		sh64_icache_inv_user_small_range(vma->vm_mm, addr, len);
-}
-
 /*
  * For the address range [start,end), write back the data from the
  * D-cache and invalidate the corresponding region of the I-cache for the
  * current process.  Used to flush signal trampolines on the stack to
  * make them executable.
  */
-void flush_cache_sigtramp(unsigned long vaddr)
+static void sh5_flush_cache_sigtramp(unsigned long vaddr)
 {
 	unsigned long end = vaddr + L1_CACHE_BYTES;
 
@@ -685,138 +597,19 @@ void flush_cache_sigtramp(unsigned long vaddr)
 	sh64_icache_inv_current_user_range(vaddr, end);
 }
 
-#ifdef CONFIG_MMU
-/*
- * These *MUST* lie in an area of virtual address space that's otherwise
- * unused.
- */
-#define UNIQUE_EADDR_START 0xe0000000UL
-#define UNIQUE_EADDR_END   0xe8000000UL
-
-/*
- * Given a physical address paddr, and a user virtual address user_eaddr
- * which will eventually be mapped to it, create a one-off kernel-private
- * eaddr mapped to the same paddr.  This is used for creating special
- * destination pages for copy_user_page and clear_user_page.
- */
-static unsigned long sh64_make_unique_eaddr(unsigned long user_eaddr,
-					    unsigned long paddr)
-{
-	static unsigned long current_pointer = UNIQUE_EADDR_START;
-	unsigned long coloured_pointer;
-
-	if (current_pointer == UNIQUE_EADDR_END) {
-		sh64_dcache_purge_all();
-		current_pointer = UNIQUE_EADDR_START;
-	}
-
-	coloured_pointer = (current_pointer & ~CACHE_OC_SYN_MASK) |
-				(user_eaddr & CACHE_OC_SYN_MASK);
-	sh64_setup_dtlb_cache_slot(coloured_pointer, get_asid(), paddr);
-
-	current_pointer += (PAGE_SIZE << CACHE_OC_N_SYNBITS);
-
-	return coloured_pointer;
-}
-
-static void sh64_copy_user_page_coloured(void *to, void *from,
-					 unsigned long address)
-{
-	void *coloured_to;
-
-	/*
-	 * Discard any existing cache entries of the wrong colour.  These are
-	 * present quite often, if the kernel has recently used the page
-	 * internally, then given it up, then it's been allocated to the user.
-	 */
-	sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long)to);
-
-	coloured_to = (void *)sh64_make_unique_eaddr(address, __pa(to));
-	copy_page(from, coloured_to);
-
-	sh64_teardown_dtlb_cache_slot();
-}
-
-static void sh64_clear_user_page_coloured(void *to, unsigned long address)
-{
-	void *coloured_to;
-
-	/*
-	 * Discard any existing kernel-originated lines of the wrong
-	 * colour (as above)
-	 */
-	sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long)to);
-
-	coloured_to = (void *)sh64_make_unique_eaddr(address, __pa(to));
-	clear_page(coloured_to);
-
-	sh64_teardown_dtlb_cache_slot();
-}
-
-/*
- * 'from' and 'to' are kernel virtual addresses (within the superpage
- * mapping of the physical RAM).  'address' is the user virtual address
- * where the copy 'to' will be mapped after.  This allows a custom
- * mapping to be used to ensure that the new copy is placed in the
- * right cache sets for the user to see it without having to bounce it
- * out via memory.  Note however : the call to flush_page_to_ram in
- * (generic)/mm/memory.c:(break_cow) undoes all this good work in that one
- * very important case!
- *
- * TBD : can we guarantee that on every call, any cache entries for
- * 'from' are in the same colour sets as 'address' also?  i.e. is this
- * always used just to deal with COW?  (I suspect not).
- *
- * There are two possibilities here for when the page 'from' was last accessed:
- * - by the kernel : this is OK, no purge required.
- * - by the/a user (e.g. for break_COW) : need to purge.
- *
- * If the potential user mapping at 'address' is the same colour as
- * 'from' there is no need to purge any cache lines from the 'from'
- * page mapped into cache sets of colour 'address'.  (The copy will be
- * accessing the page through 'from').
- */
-void copy_user_page(void *to, void *from, unsigned long address,
-		    struct page *page)
+void __init sh5_cache_init(void)
 {
-	if (((address ^ (unsigned long) from) & CACHE_OC_SYN_MASK) != 0)
-		sh64_dcache_purge_coloured_phy_page(__pa(from), address);
+	flush_cache_all		= sh5_flush_cache_all;
+	flush_cache_mm		= sh5_flush_cache_mm;
+	flush_cache_dup_mm	= sh5_flush_cache_mm;
+	flush_cache_page	= sh5_flush_cache_page;
+	flush_cache_range	= sh5_flush_cache_range;
+	flush_dcache_page	= sh5_flush_dcache_page;
+	flush_icache_range	= sh5_flush_icache_range;
+	flush_cache_sigtramp	= sh5_flush_cache_sigtramp;
 
-	if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0)
-		copy_page(to, from);
-	else
-		sh64_copy_user_page_coloured(to, from, address);
-}
-
-/*
- * 'to' is a kernel virtual address (within the superpage mapping of the
- * physical RAM).  'address' is the user virtual address where the 'to'
- * page will be mapped after.  This allows a custom mapping to be used to
- * ensure that the new copy is placed in the right cache sets for the
- * user to see it without having to bounce it out via memory.
- */
-void clear_user_page(void *to, unsigned long address, struct page *page)
-{
-	if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0)
-		clear_page(to);
-	else
-		sh64_clear_user_page_coloured(to, address);
-}
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long vaddr, void *dst, const void *src,
-		       unsigned long len)
-{
-	flush_cache_page(vma, vaddr, page_to_pfn(page));
-	memcpy(dst, src, len);
-	flush_icache_user_range(vma, page, vaddr, len);
-}
+	/* Reserve a slot for dcache colouring in the DTLB */
+	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
 
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
-			 unsigned long vaddr, void *dst, const void *src,
-			 unsigned long len)
-{
-	flush_cache_page(vma, vaddr, page_to_pfn(page));
-	memcpy(dst, src, len);
+	sh4__flush_region_init();
 }
-#endif
diff --git a/arch/sh/mm/flush-sh4.c b/arch/sh/mm/flush-sh4.c
index 99c50dc7551..cef402678f4 100644
--- a/arch/sh/mm/flush-sh4.c
+++ b/arch/sh/mm/flush-sh4.c
@@ -19,28 +19,19 @@ static void sh4__flush_wback_region(void *start, int size)
 	cnt = (end - v) / L1_CACHE_BYTES;
 
 	while (cnt >= 8) {
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
 		cnt -= 8;
 	}
 
 	while (cnt) {
-		asm volatile("ocbwb	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
+		__ocbwb(v); v += L1_CACHE_BYTES;
 		cnt--;
 	}
 }
@@ -62,27 +53,18 @@ static void sh4__flush_purge_region(void *start, int size)
 	cnt = (end - v) / L1_CACHE_BYTES;
 
 	while (cnt >= 8) {
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
 		cnt -= 8;
 	}
 	while (cnt) {
-		asm volatile("ocbp	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
+		__ocbp(v); v += L1_CACHE_BYTES;
 		cnt--;
 	}
 }
@@ -101,28 +83,19 @@ static void sh4__flush_invalidate_region(void *start, int size)
 	cnt = (end - v) / L1_CACHE_BYTES;
 
 	while (cnt >= 8) {
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
 		cnt -= 8;
 	}
 
 	while (cnt) {
-		asm volatile("ocbi	@%0" : : "r" (v));
-		v += L1_CACHE_BYTES;
+		__ocbi(v); v += L1_CACHE_BYTES;
 		cnt--;
 	}
 }
-- 
cgit v1.2.3


From 8c41cdcaffb09dca8e6ad7d4d8f885e0b86b9002 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 16 Aug 2009 02:15:50 +0900
Subject: sh64: Kill off dead i/d-cache disabled bits.

These will be handled through the shared cache interface instead, and
they are presently undefined anyways.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh5.c | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 819e0f9e8db..d4a445c865d 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -25,14 +25,6 @@ extern void __weak sh4__flush_region_init(void);
 /* Wired TLB entry for the D-cache */
 static unsigned long long dtlb_cache_slot;
 
-#ifdef CONFIG_DCACHE_DISABLED
-#define sh64_dcache_purge_all()					do { } while (0)
-#define sh64_dcache_purge_coloured_phy_page(paddr, eaddr)	do { } while (0)
-#define sh64_dcache_purge_user_range(mm, start, end)		do { } while (0)
-#define sh64_dcache_purge_phy_page(paddr)			do { } while (0)
-#define sh64_dcache_purge_virt_page(mm, eaddr)			do { } while (0)
-#endif
-
 /*
  * The following group of functions deal with mapping and unmapping a
  * temporary page into a DTLB slot that has been set aside for exclusive
@@ -52,7 +44,6 @@ static inline void sh64_teardown_dtlb_cache_slot(void)
 	local_irq_enable();
 }
 
-#ifndef CONFIG_ICACHE_DISABLED
 static inline void sh64_icache_inv_all(void)
 {
 	unsigned long long addr, flag, data;
@@ -237,9 +228,7 @@ static void sh64_icache_inv_current_user_range(unsigned long start, unsigned lon
 		addr += L1_CACHE_BYTES;
 	}
 }
-#endif /* !CONFIG_ICACHE_DISABLED */
 
-#ifndef CONFIG_DCACHE_DISABLED
 /* Buffer used as the target of alloco instructions to purge data from cache
    sets by natural eviction. -- RPC */
 #define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4))
@@ -489,7 +478,6 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
 		sh64_dcache_purge_user_pages(mm, start, end);
 	}
 }
-#endif /* !CONFIG_DCACHE_DISABLED */
 
 /*
  * Invalidate the entire contents of both caches, after writing back to
-- 
cgit v1.2.3


From 2b4315185a06414c4ab40fb0db50dce1b534a1d9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 16 Aug 2009 02:16:44 +0900
Subject: sh: Wire up sh5_cache_init().

Now that the SH-5 code is more or less behaving with the new cacheflush
interface, wire up the initialization code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 8618ccdc1ca..d6023946043 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -277,5 +277,11 @@ void __init cpu_cache_init(void)
 		sh4_cache_init();
 	}
 
+	if (boot_cpu_data.family == CPU_FAMILY_SH5) {
+		extern void __weak sh5_cache_init(void);
+
+		sh5_cache_init();
+	}
+
 	emit_cache_params();
 }
-- 
cgit v1.2.3


From 38f9ddf44150c1a213b41726384d055f7c35ec4f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 16 Aug 2009 03:35:26 +0900
Subject: sh: Merge the _32/_64 variants of arch/sh/kernel/Makefile.

This uses the BITS export as per x86 in order to allow the same Makefile
to be used.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/Makefile    | 43 +++++++++++++++++++++++++++++++++++++++----
 arch/sh/kernel/Makefile_32 | 40 ----------------------------------------
 arch/sh/kernel/Makefile_64 | 20 --------------------
 3 files changed, 39 insertions(+), 64 deletions(-)
 delete mode 100644 arch/sh/kernel/Makefile_32
 delete mode 100644 arch/sh/kernel/Makefile_64

(limited to 'arch')

diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 349d833deab..f37cf02ad9b 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -1,5 +1,40 @@
-ifeq ($(CONFIG_SUPERH32),y)
-include ${srctree}/arch/sh/kernel/Makefile_32
-else
-include ${srctree}/arch/sh/kernel/Makefile_64
+#
+# Makefile for the Linux/SuperH kernel.
+#
+
+extra-y	:= head_$(BITS).o init_task.o vmlinux.lds
+
+ifdef CONFIG_FUNCTION_TRACER
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_ftrace.o = -pg
 endif
+
+obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
+	   machvec.o process_$(BITS).o ptrace_$(BITS).o setup.o 	\
+	   signal_$(BITS).o sys_sh.o sys_sh$(BITS).o syscalls_$(BITS).o	\
+	   time.o topology.o traps.o traps_$(BITS).o unwinder.o
+
+obj-y				+= cpu/
+obj-$(CONFIG_VSYSCALL)		+= vsyscall/
+obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
+obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
+obj-$(CONFIG_MODULES)		+= sh_ksyms_$(BITS).o module.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
+obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
+obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o
+obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
+
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
deleted file mode 100644
index f2245ebf0b3..00000000000
--- a/arch/sh/kernel/Makefile_32
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# Makefile for the Linux/SuperH kernel.
-#
-
-extra-y	:= head_32.o init_task.o vmlinux.lds
-
-ifdef CONFIG_FUNCTION_TRACER
-# Do not profile debug and lowlevel utilities
-CFLAGS_REMOVE_ftrace.o = -pg
-endif
-
-obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
-	   machvec.o process_32.o ptrace_32.o setup.o signal_32.o	\
-	   sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o		\
-	   traps.o traps_32.o unwinder.o
-
-obj-y				+= cpu/
-obj-$(CONFIG_VSYSCALL)		+= vsyscall/
-obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS)	+= sh_bios.o
-obj-$(CONFIG_KGDB)		+= kgdb.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
-obj-$(CONFIG_MODULES)		+= sh_ksyms_32.o module.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
-obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
-obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
-obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
-obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
-obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o
-obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
-
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
deleted file mode 100644
index 639ee514266..00000000000
--- a/arch/sh/kernel/Makefile_64
+++ /dev/null
@@ -1,20 +0,0 @@
-extra-y	:= head_64.o init_task.o vmlinux.lds
-
-obj-y	:= debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
-	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
-	   syscalls_64.o time.o topology.o traps.o traps_64.o unwinder.o
-
-obj-y				+= cpu/
-obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SH_CPU_FREQ)	+= cpufreq.o
-obj-$(CONFIG_MODULES)		+= sh_ksyms_64.o module.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
-obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
-
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
-
-EXTRA_CFLAGS += -Werror
-- 
cgit v1.2.3


From 1b3edd9745ef3a9ee831fe5a611757686579c9e1 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sun, 16 Aug 2009 03:49:21 +0900
Subject: sh: Merge the _32/_64 variants of arch/sh/mm/Makefile.

Now that there is sufficient shared infrastructure, merge the Makefiles.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Makefile    | 70 +++++++++++++++++++++++++++++++++++++++++++++++---
 arch/sh/mm/Makefile_32 | 39 ----------------------------
 arch/sh/mm/Makefile_64 | 46 ---------------------------------
 3 files changed, 66 insertions(+), 89 deletions(-)
 delete mode 100644 arch/sh/mm/Makefile_32
 delete mode 100644 arch/sh/mm/Makefile_64

(limited to 'arch')

diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 9f4bc3d90b1..4ca71e9e09e 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -1,5 +1,67 @@
-ifeq ($(CONFIG_SUPERH32),y)
-include ${srctree}/arch/sh/mm/Makefile_32
-else
-include ${srctree}/arch/sh/mm/Makefile_64
+#
+# Makefile for the Linux SuperH-specific parts of the memory manager.
+#
+
+obj-y			:= cache.o init.o consistent.o mmap.o
+
+ifndef CONFIG_CACHE_OFF
+cacheops-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
+cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
+cacheops-$(CONFIG_CPU_SH5)		:= cache-sh5.o flush-sh4.o
+cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 endif
+
+obj-y			+= $(cacheops-y)
+
+mmu-y			:= nommu.o extable_32.o
+mmu-$(CONFIG_MMU)	:= extable_$(BITS).o fault_$(BITS).o \
+			   ioremap_$(BITS).o kmap.o tlbflush_$(BITS).o
+
+obj-y			+= $(mmu-y)
+obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
+
+ifdef CONFIG_DEBUG_FS
+obj-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
+endif
+
+ifdef CONFIG_MMU
+tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
+tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
+tlb-$(CONFIG_CPU_SH5)		:= tlb-sh5.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
+obj-y				+= $(tlb-y)
+endif
+
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_PMB)		+= pmb.o
+obj-$(CONFIG_PMB_FIXED)		+= pmb-fixed.o
+obj-$(CONFIG_NUMA)		+= numa.o
+
+# Special flags for fault_64.o.  This puts restrictions on the number of
+# caller-save registers that the compiler can target when building this file.
+# This is required because the code is called from a context in entry.S where
+# very few registers have been saved in the exception handler (for speed
+# reasons).
+# The caller save registers that have been saved and which can be used are
+# r2,r3,r4,r5 : argument passing
+# r15, r18 : SP and LINK
+# tr0-4 : allow all caller-save TR's.  The compiler seems to be able to make
+#         use of them, so it's probably beneficial to performance to save them
+#         and have them available for it.
+#
+# The resources not listed below are callee save, i.e. the compiler is free to
+# use any of them and will spill them to the stack itself.
+
+CFLAGS_fault_64.o += -ffixed-r7 \
+	-ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
+	-ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
+	-ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
+	-ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
+	-ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
+	-ffixed-r41 -ffixed-r42 -ffixed-r43  \
+	-ffixed-r60 -ffixed-r61 -ffixed-r62 \
+	-fomit-frame-pointer
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
deleted file mode 100644
index ff3b07bd772..00000000000
--- a/arch/sh/mm/Makefile_32
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# Makefile for the Linux SuperH-specific parts of the memory manager.
-#
-
-obj-y			:= cache.o init.o extable_32.o consistent.o mmap.o
-
-ifndef CONFIG_CACHE_OFF
-cacheops-$(CONFIG_CPU_SH2)		:= cache-sh2.o
-cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
-cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
-cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
-cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
-endif
-
-obj-y			+= $(cacheops-y)
-
-mmu-y			:= nommu.o
-mmu-$(CONFIG_MMU)	:= fault_32.o kmap.o tlbflush_32.o ioremap_32.o
-
-obj-y			+= $(mmu-y)
-obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
-
-ifdef CONFIG_DEBUG_FS
-obj-$(CONFIG_CPU_SH4)	+= cache-debugfs.o
-endif
-
-ifdef CONFIG_MMU
-tlb-$(CONFIG_CPU_SH3)		:= tlb-sh3.o
-tlb-$(CONFIG_CPU_SH4)		:= tlb-sh4.o
-tlb-$(CONFIG_CPU_HAS_PTEAEX)	:= tlb-pteaex.o
-obj-y				+= $(tlb-y)
-endif
-
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_PMB)		+= pmb.o
-obj-$(CONFIG_PMB_FIXED)		+= pmb-fixed.o
-obj-$(CONFIG_NUMA)		+= numa.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64
deleted file mode 100644
index dd104c4fffa..00000000000
--- a/arch/sh/mm/Makefile_64
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# Makefile for the Linux SuperH-specific parts of the memory manager.
-#
-
-obj-y			:= cache.o consistent.o init.o kmap.o mmap.o
-
-mmu-y			:= nommu.o extable_32.o
-mmu-$(CONFIG_MMU)	:= fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
-			   extable_64.o
-
-ifndef CONFIG_CACHE_OFF
-obj-y			+= cache-sh5.o flush-sh4.o
-endif
-
-obj-y			+= $(mmu-y)
-obj-$(CONFIG_DEBUG_FS)	+= asids-debugfs.o
-
-obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_NUMA)		+= numa.o
-
-EXTRA_CFLAGS += -Werror
-
-# Special flags for fault_64.o.  This puts restrictions on the number of
-# caller-save registers that the compiler can target when building this file.
-# This is required because the code is called from a context in entry.S where
-# very few registers have been saved in the exception handler (for speed
-# reasons).
-# The caller save registers that have been saved and which can be used are
-# r2,r3,r4,r5 : argument passing
-# r15, r18 : SP and LINK
-# tr0-4 : allow all caller-save TR's.  The compiler seems to be able to make
-#         use of them, so it's probably beneficial to performance to save them
-#         and have them available for it.
-#
-# The resources not listed below are callee save, i.e. the compiler is free to
-# use any of them and will spill them to the stack itself.
-
-CFLAGS_fault_64.o += -ffixed-r7 \
-	-ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \
-	-ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \
-	-ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \
-	-ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \
-	-ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \
-	-ffixed-r41 -ffixed-r42 -ffixed-r43  \
-	-ffixed-r60 -ffixed-r61 -ffixed-r62 \
-	-fomit-frame-pointer
-- 
cgit v1.2.3


From b955873bf530ee4b80e6c8b734521ad07cbaed7e Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sat, 15 Aug 2009 23:10:57 +0100
Subject: sh: Try again at getting the initial return address for an unwind

The previous hack for calculating the return address for the first frame
we unwind (dwarf_unwinder_dump) didn't always work. The problem was that
it assumed once it read the rule for calculating the return address,
there would be no new rules for calculating it. This isn't true because
the way in which the CFA is calculated can change as you progress
through a function and the return address is figured out using the
CFA. Therefore, the way to calculate the return address can change.

So, instead of using some offset from the beginning of
dwarf_unwind_stack which is just a flakey approach, and instead of
executing instructions from the FDE until the return address is setup,
we now figure out the pc in dwarf_unwind_stack() just before we call
dwarf_cfa_execute_insns().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/kernel/dwarf.c | 41 ++++++-----------------------------------
 1 file changed, 6 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index c6c5764a8ab..44e674ed287 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -330,7 +330,6 @@ struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
  *	@fde: the FDE for this function
  *	@frame: the instructions calculate the CFA for this frame
  *	@pc: the program counter of the address we're interested in
- *	@define_ra: keep executing insns until the return addr reg is defined?
  *
  *	Execute the Call Frame instruction sequence starting at
  *	@insn_start and ending at @insn_end. The instructions describe
@@ -342,36 +341,17 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 				   struct dwarf_cie *cie,
 				   struct dwarf_fde *fde,
 				   struct dwarf_frame *frame,
-				   unsigned long pc,
-				   bool define_ra)
+				   unsigned long pc)
 {
 	unsigned char insn;
 	unsigned char *current_insn;
 	unsigned int count, delta, reg, expr_len, offset;
-	bool seen_ra_reg;
 
 	current_insn = insn_start;
 
-	/*
-	 * If we're executing instructions for the dwarf_unwind_stack()
-	 * FDE we need to keep executing instructions until the value of
-	 * DWARF_ARCH_RA_REG is defined. See the comment in
-	 * dwarf_unwind_stack() for more details.
-	 */
-	if (define_ra)
-		seen_ra_reg = false;
-	else
-		seen_ra_reg = true;
-
-	while (current_insn < insn_end && (frame->pc <= pc || !seen_ra_reg) ) {
+	while (current_insn < insn_end && frame->pc <= pc) {
 		insn = __raw_readb(current_insn++);
 
-		if (!seen_ra_reg) {
-			if (frame->num_regs >= DWARF_ARCH_RA_REG &&
-			    frame->regs[DWARF_ARCH_RA_REG].flags)
-				seen_ra_reg = true;
-		}
-
 		/*
 		 * Firstly, handle the opcodes that embed their operands
 		 * in the instructions.
@@ -511,26 +491,17 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	struct dwarf_fde *fde;
 	unsigned long addr;
 	int i, offset;
-	bool define_ra = false;
 
 	/*
 	 * If this is the first invocation of this recursive function we
 	 * need get the contents of a physical register to get the CFA
 	 * in order to begin the virtual unwinding of the stack.
 	 *
-	 * Setting "define_ra" to true indictates that we want
-	 * dwarf_cfa_execute_insns() to continue executing instructions
-	 * until we know how to calculate the value of DWARF_ARCH_RA_REG
-	 * (which we need in order to kick off the whole unwinding
-	 * process).
-	 *
 	 * NOTE: the return address is guaranteed to be setup by the
 	 * time this function makes its first function call.
 	 */
-	if (!pc && !prev) {
-		pc = (unsigned long)&dwarf_unwind_stack;
-		define_ra = true;
-	}
+	if (!pc && !prev)
+		pc = (unsigned long)current_text_addr();
 
 	frame = kzalloc(sizeof(*frame), GFP_ATOMIC);
 	if (!frame)
@@ -566,11 +537,11 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	/* CIE initial instructions */
 	dwarf_cfa_execute_insns(cie->initial_instructions,
 				cie->instructions_end, cie, fde,
-				frame, pc, false);
+				frame, pc);
 
 	/* FDE instructions */
 	dwarf_cfa_execute_insns(fde->instructions, fde->end, cie,
-				fde, frame, pc, define_ra);
+				fde, frame, pc);
 
 	/* Calculate the CFA */
 	switch (frame->flags) {
-- 
cgit v1.2.3


From cd7246f0e2747bd2b43d25d0f63f05db182a62c0 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 16 Aug 2009 01:44:33 +0100
Subject: sh: Add support for DWARF GNU extensions

Also, remove the "fix" to DW_CFA_def_cfa_register where we reset the
frame's cfa_offset to 0. This action is incorrect when handling
DW_CFA_def_cfa_register as the DWARF spec specifically states that the
previous contents of cfa_offset should be used with the new
register. The reason that I thought cfa_offset should be reset to 0 was
because it was being assigned a bogus value prior to executing the
DW_CFA_def_cfa_register op. It turns out that the bogus cfa_offset value
came from interpreting .cfi_escape pseudo-ops (those used by the GNU
extensions) as CFA_DW_def_cfa ops.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/include/asm/dwarf.h |  4 ++++
 arch/sh/kernel/dwarf.c      | 14 +++++++++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index 60b180728d8..d3d3837c5e1 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -340,6 +340,10 @@ struct dwarf_stack {
 #define DW_CFA_lo_user		0x1c
 #define DW_CFA_hi_user		0x3f
 
+/* GNU extension opcodes  */
+#define DW_CFA_GNU_args_size	0x2e
+#define DW_CFA_GNU_negative_offset_extended 0x2f
+
 /*
  * Some call frame instructions encode their operands in the opcode. We
  * need some helper functions to extract both the opcode and operands
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 44e674ed287..5fd6e604816 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -429,7 +429,6 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			count = dwarf_read_uleb128(current_insn,
 						   &frame->cfa_register);
 			current_insn += count;
-			frame->cfa_offset = 0;
 			frame->flags |= DWARF_FRAME_CFA_REG_OFFSET;
 			break;
 		case DW_CFA_def_cfa_offset:
@@ -465,6 +464,19 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			frame->regs[reg].flags |= DWARF_REG_OFFSET;
 			frame->regs[reg].addr = offset;
 			break;
+		case DW_CFA_GNU_args_size:
+			count = dwarf_read_uleb128(current_insn, &offset);
+			current_insn += count;
+			break;
+		case DW_CFA_GNU_negative_offset_extended:
+			count = dwarf_read_uleb128(current_insn, &reg);
+			current_insn += count;
+			count = dwarf_read_uleb128(current_insn, &offset);
+			offset *= cie->data_alignment_factor;
+			dwarf_frame_alloc_regs(frame, reg);
+			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			frame->regs[reg].addr = -offset;
+			break;
 		default:
 			pr_debug("unhandled DWARF instruction 0x%x\n", insn);
 			break;
-- 
cgit v1.2.3


From 4e5c25d405e18a2f279ca2bfc855508ec3a0186b Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Date: Sun, 16 Aug 2009 15:54:37 +0100
Subject: x86, mce: therm_throt: Don't log redundant normality

0d01f31439c1e4d602bf9fdc924ab66f407f5e38 "x86, mce: therm_throt
- change when we print messages" removed redundant
announcements of "Temperature/speed normal".

They're not worth logging and remove their accompanying
"Machine check events logged" messages as well from the
console.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
LKML-Reference: <Pine.LNX.4.64.0908161544100.7929@sister.anvils>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 8bc64cfbe93..5957a93e517 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -116,11 +116,14 @@ static int therm_throt_process(int curr)
 		       cpu, __get_cpu_var(thermal_throttle_count));
 
 		add_taint(TAINT_MACHINE_CHECK);
-	} else if (was_throttled) {
+		return 1;
+	}
+	if (was_throttled) {
 		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+		return 1;
 	}
 
-	return 1;
+	return 0;
 }
 
 #ifdef CONFIG_SYSFS
-- 
cgit v1.2.3


From 52459ab91363343af8ae252766e9da762344a2e7 Mon Sep 17 00:00:00 2001
From: Leonardo Potenza <lpotenza@inwind.it>
Date: Sun, 16 Aug 2009 18:55:48 +0200
Subject: x86: Annotate section mismatch warnings in kernel/apic/x2apic_uv_x.c

The function uv_acpi_madt_oem_check() has been marked __init,
the struct apic_x2apic_uv_x has been marked __refdata.

The aim is to address the following section mismatch messages:

WARNING: arch/x86/kernel/apic/built-in.o(.data+0x1368): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary()
The variable apic_x2apic_uv_x references
the function __cpuinit uv_wakeup_secondary()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: arch/x86/kernel/built-in.o(.data+0x68e8): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary()
The variable apic_x2apic_uv_x references
the function __cpuinit uv_wakeup_secondary()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

WARNING: arch/x86/built-in.o(.text+0x7b36f): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_ioremap()
The function uv_acpi_madt_oem_check() references
the function __init early_ioremap().
This is often because uv_acpi_madt_oem_check lacks a __init
annotation or the annotation of early_ioremap is wrong.

WARNING: arch/x86/built-in.o(.text+0x7b38d): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_iounmap()
The function uv_acpi_madt_oem_check() references
the function __init early_iounmap().
This is often because uv_acpi_madt_oem_check lacks a __init
annotation or the annotation of early_iounmap is wrong.

WARNING: arch/x86/built-in.o(.data+0x8668): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary()
The variable apic_x2apic_uv_x references
the function __cpuinit uv_wakeup_secondary()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
LKML-Reference: <200908161855.48302.lpotenza@inwind.it>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 832e908adcb..601159374e8 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -46,7 +46,7 @@ static int early_get_nodeid(void)
 	return node_id.s.node_id;
 }
 
-static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
 		if (!strcmp(oem_table_id, "UVL"))
@@ -253,7 +253,7 @@ static void uv_send_IPI_self(int vector)
 	apic_write(APIC_SELF_IPI, vector);
 }
 
-struct apic apic_x2apic_uv_x = {
+struct apic __refdata apic_x2apic_uv_x = {
 
 	.name				= "UV large system",
 	.probe				= NULL,
-- 
cgit v1.2.3


From 97f361e2498ada54b48a235619eaf5af8e46427e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 17 Aug 2009 05:07:38 +0900
Subject: sh: unwinder: Move initialization to early_initcall() and tidy up
 locking.

This moves the initialization over to an early_initcall(). This fixes up
some lockdep interaction issues. At the same time, kill off some
superfluous locking in the init path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/dwarf.h |  2 --
 arch/sh/kernel/dwarf.c      | 32 +++++++++++++++-----------------
 arch/sh/kernel/irq.c        |  4 ----
 3 files changed, 15 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index d3d3837c5e1..2fbe8720411 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -370,8 +370,6 @@ static inline unsigned int DW_CFA_operand(unsigned long insn)
 #define DW_EXT_HI	0xffffffff
 #define DW_EXT_DWARF64	DW_EXT_HI
 
-extern void dwarf_unwinder_init(void);
-
 extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
 					      struct dwarf_frame *);
 #endif /* __ASSEMBLY__ */
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 5fd6e604816..d0652153f57 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -26,10 +26,10 @@
 #include <asm/stacktrace.h>
 
 static LIST_HEAD(dwarf_cie_list);
-DEFINE_SPINLOCK(dwarf_cie_lock);
+static DEFINE_SPINLOCK(dwarf_cie_lock);
 
 static LIST_HEAD(dwarf_fde_list);
-DEFINE_SPINLOCK(dwarf_fde_lock);
+static DEFINE_SPINLOCK(dwarf_fde_lock);
 
 static struct dwarf_cie *cached_cie;
 
@@ -264,7 +264,7 @@ static inline int dwarf_entry_len(char *addr, unsigned long *len)
  */
 static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
 {
-	struct dwarf_cie *cie, *n;
+	struct dwarf_cie *cie;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dwarf_cie_lock, flags);
@@ -278,7 +278,7 @@ static struct dwarf_cie *dwarf_lookup_cie(unsigned long cie_ptr)
 		goto out;
 	}
 
-	list_for_each_entry_safe(cie, n, &dwarf_cie_list, link) {
+	list_for_each_entry(cie, &dwarf_cie_list, link) {
 		if (cie->cie_pointer == cie_ptr) {
 			cached_cie = cie;
 			break;
@@ -299,11 +299,12 @@ out:
  */
 struct dwarf_fde *dwarf_lookup_fde(unsigned long pc)
 {
+	struct dwarf_fde *fde;
 	unsigned long flags;
-	struct dwarf_fde *fde, *n;
 
 	spin_lock_irqsave(&dwarf_fde_lock, flags);
-	list_for_each_entry_safe(fde, n, &dwarf_fde_list, link) {
+
+	list_for_each_entry(fde, &dwarf_fde_list, link) {
 		unsigned long start, end;
 
 		start = fde->initial_location;
@@ -787,24 +788,19 @@ static struct unwinder dwarf_unwinder = {
 
 static void dwarf_unwinder_cleanup(void)
 {
-	struct dwarf_cie *cie, *m;
-	struct dwarf_fde *fde, *n;
-	unsigned long flags;
+	struct dwarf_cie *cie;
+	struct dwarf_fde *fde;
 
 	/*
 	 * Deallocate all the memory allocated for the DWARF unwinder.
 	 * Traverse all the FDE/CIE lists and remove and free all the
 	 * memory associated with those data structures.
 	 */
-	spin_lock_irqsave(&dwarf_cie_lock, flags);
-	list_for_each_entry_safe(cie, m, &dwarf_cie_list, link)
+	list_for_each_entry(cie, &dwarf_cie_list, link)
 		kfree(cie);
-	spin_unlock_irqrestore(&dwarf_cie_lock, flags);
 
-	spin_lock_irqsave(&dwarf_fde_lock, flags);
-	list_for_each_entry_safe(fde, n, &dwarf_fde_list, link)
+	list_for_each_entry(fde, &dwarf_fde_list, link)
 		kfree(fde);
-	spin_unlock_irqrestore(&dwarf_fde_lock, flags);
 }
 
 /**
@@ -816,7 +812,7 @@ static void dwarf_unwinder_cleanup(void)
  *	easy to lookup the FDE for a given PC, so we build a list of FDE
  *	and CIE entries that make it easier.
  */
-void dwarf_unwinder_init(void)
+static int __init dwarf_unwinder_init(void)
 {
 	u32 entry_type;
 	void *p, *entry;
@@ -877,9 +873,11 @@ void dwarf_unwinder_init(void)
 	if (err)
 		goto out;
 
-	return;
+	return 0;
 
 out:
 	printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
 	dwarf_unwinder_cleanup();
+	return -EINVAL;
 }
+early_initcall(dwarf_unwinder_init);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 2bb43dc74f2..278c68c6048 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -14,7 +14,6 @@
 #include <asm/processor.h>
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
-#include <asm/dwarf.h>
 #include <asm/thread_info.h>
 #include <cpu/mmu_context.h>
 
@@ -262,9 +261,6 @@ void __init init_IRQ(void)
 		sh_mv.mv_init_irq();
 
 	irq_ctx_init(smp_processor_id());
-
-	/* This needs to be early, but not too early.. */
-	dwarf_unwinder_init();
 }
 
 #ifdef CONFIG_SPARSE_IRQ
-- 
cgit v1.2.3


From ff54b4578448d616eb177e216acd599ecf5ee5b1 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:49 +0900
Subject: ARM: S5PC100: Memory map

S5PC100's the physical IO space starts at 0xe000"0000. To maximize space for
vmalloc, the virtual IO space starts at 0xf400"0000 as same as other samsung
CPUs(s3c24xx and s3c64xx) do.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject and description fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/map.h    | 75 +++++++++++++++++++++++++++++
 arch/arm/mach-s5pc100/include/mach/memory.h | 18 +++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/map.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/memory.h

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 00000000000..9e9f39130b2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID	(0xE0000000)
+#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS		(0xE0100000)
+#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_VA_VIC		S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET	0x100000
+#define S5PC100_VA_VIC_OFFSET	0x10000
+#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER	(0xEA000000)
+#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC1XX_PA_UART		S5PC100_PA_UART
+#define S5PC1XX_VA_UART		S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC		(0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM	(0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART		S5PC100_PA_UART
+#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
+#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
+#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
+#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET		0x400
+#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC		S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 00000000000..4b60d18179f
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+
+#endif
-- 
cgit v1.2.3


From 433a915fc6456ee3a4b740fe4d92caa78164fdce Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:09 +0900
Subject: ARM: S5PC100: UART and Serial

Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/dev-uart.c | 174 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)
 create mode 100644 arch/arm/plat-s5pc1xx/dev-uart.c

(limited to 'arch')

diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 00000000000..f749bc5407b
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5pc1xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5pc1xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5pc1xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5pc1xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
+	},
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
-- 
cgit v1.2.3


From 8acd1ade2ede18408303c968e1449220c427a182 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:15 +0900
Subject: ARM: S5PC100: CPU initialization

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/cpu.c                      |  97 ++++++++++++++++++++
 arch/arm/mach-s5pc100/include/mach/debug-macro.S |  38 ++++++++
 arch/arm/mach-s5pc100/include/mach/entry-macro.S |  50 ++++++++++
 arch/arm/mach-s5pc100/include/mach/hardware.h    |  14 +++
 arch/arm/mach-s5pc100/include/mach/system.h      |  24 +++++
 arch/arm/mach-s5pc100/include/mach/uncompress.h  |  28 ++++++
 arch/arm/plat-s5pc1xx/cpu.c                      | 112 +++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h     |  65 +++++++++++++
 arch/arm/plat-s5pc1xx/s5pc100-init.c             |  27 ++++++
 9 files changed, 455 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/cpu.c
 create mode 100644 arch/arm/mach-s5pc100/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/hardware.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/system.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/uncompress.h
 create mode 100644 arch/arm/plat-s5pc1xx/cpu.c
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-init.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 00000000000..0e718890da3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+	/* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s5pc1xx_register_clocks();
+	s5pc100_register_clocks();
+	s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+	u32 vic_valid[] = {~0, ~0, ~0};
+
+	/* VIC0, VIC1, and VIC2 are fully populated. */
+	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+	.name	= "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+	.cls	= &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+	return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+	return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 00000000000..9d142ccf654
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 00000000000..67131939e62
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 00000000000..38ce8206a1a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 00000000000..e3901437547
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 00000000000..01ccf535e76
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 00000000000..715a7330794
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	},
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
+		.length		= SZ_16,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 00000000000..45e27513166
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern  int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 00000000000..c58710884ce
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
+	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
-- 
cgit v1.2.3


From 0164cbf4390fbcd7125fc8d476a451a3efa14c5d Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:22 +0900
Subject: ARM: S5PC100: GPIO and I2C

S5PC100 has more GPIO group then previous one. It has 34 groups of GPIO, while
S3C6410 has 17 groups. For now, only header files are written.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/gpio-core.h |  21 ++++
 arch/arm/mach-s5pc100/include/mach/gpio.h      | 146 +++++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/setup-i2c0.c             |  25 +++++
 arch/arm/plat-s5pc1xx/setup-i2c1.c             |  25 +++++
 4 files changed, 217 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio-core.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio.h
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c0.c
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c1.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 00000000000..ad28d8ec8a7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 00000000000..c74fc93d7d1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR	(8)
+#define S5PC1XX_GPIO_A1_NR	(5)
+#define S5PC1XX_GPIO_B_NR	(8)
+#define S5PC1XX_GPIO_C_NR	(5)
+#define S5PC1XX_GPIO_D_NR	(7)
+#define S5PC1XX_GPIO_E0_NR	(8)
+#define S5PC1XX_GPIO_E1_NR	(6)
+#define S5PC1XX_GPIO_F0_NR	(8)
+#define S5PC1XX_GPIO_F1_NR	(8)
+#define S5PC1XX_GPIO_F2_NR	(8)
+#define S5PC1XX_GPIO_F3_NR	(4)
+#define S5PC1XX_GPIO_G0_NR	(8)
+#define S5PC1XX_GPIO_G1_NR	(3)
+#define S5PC1XX_GPIO_G2_NR	(7)
+#define S5PC1XX_GPIO_G3_NR	(7)
+#define S5PC1XX_GPIO_H0_NR	(8)
+#define S5PC1XX_GPIO_H1_NR	(8)
+#define S5PC1XX_GPIO_H2_NR	(8)
+#define S5PC1XX_GPIO_H3_NR	(8)
+#define S5PC1XX_GPIO_I_NR	(8)
+#define S5PC1XX_GPIO_J0_NR	(8)
+#define S5PC1XX_GPIO_J1_NR	(5)
+#define S5PC1XX_GPIO_J2_NR	(8)
+#define S5PC1XX_GPIO_J3_NR	(8)
+#define S5PC1XX_GPIO_J4_NR	(4)
+#define S5PC1XX_GPIO_K0_NR	(8)
+#define S5PC1XX_GPIO_K1_NR	(6)
+#define S5PC1XX_GPIO_K2_NR	(8)
+#define S5PC1XX_GPIO_K3_NR	(8)
+#define S5PC1XX_GPIO_MP00_NR	(8)
+#define S5PC1XX_GPIO_MP01_NR	(8)
+#define S5PC1XX_GPIO_MP02_NR	(8)
+#define S5PC1XX_GPIO_MP03_NR	(8)
+#define S5PC1XX_GPIO_MP04_NR	(5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S5PC1XX_GPIO_A0_START 	= 0,
+	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END		S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 00000000000..3d00c025fff
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 00000000000..c8f3ca42f51
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
-- 
cgit v1.2.3


From c9b870e7e796eea515a261a314917317ebb1cb4a Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:03 +0900
Subject: ARM: S5PC100: IRQ and timer

S5PC100 has 3 VICs(Vectored Interrupt Controller). The VICs come from S3C64xx
series, so the driver source code can be shared with S3C families. The S5PC100
has 3 VICs while S3C64xx has only 2.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/irqs.h      |  14 ++
 arch/arm/mach-s5pc100/include/mach/pwm-clock.h |  56 ++++++
 arch/arm/mach-s5pc100/include/mach/regs-irq.h  |  24 +++
 arch/arm/mach-s5pc100/include/mach/tick.h      |  29 +++
 arch/arm/plat-s5pc1xx/include/plat/irqs.h      | 182 +++++++++++++++++
 arch/arm/plat-s5pc1xx/irq.c                    | 259 +++++++++++++++++++++++++
 6 files changed, 564 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/irqs.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/pwm-clock.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-irq.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/tick.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/irqs.h
 create mode 100644 arch/arm/plat-s5pc1xx/irq.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 00000000000..622720dba28
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 00000000000..b34d2f7aae5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 00000000000..751ac15438c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 00000000000..d3de0f3591a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 00000000000..f07d8c3b25d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET		(32)
+
+#define S3C_IRQ(x)		((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE		S3C_IRQ(0)
+#define S3C_VIC1_BASE		S3C_IRQ(32)
+#define S3C_VIC2_BASE		S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x)	(S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0		S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1		S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2		S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3		S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4		S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5		S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6		S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7		S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8		S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9		S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10		S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11		S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12		S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13		S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14		S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15		S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31		S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF		S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0		S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1		S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2		S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3		S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4		S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0		S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC			S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC			S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0		S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1		S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2		S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3		S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC			S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0		S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1		S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2		S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA		S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0		S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1		S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX		S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST		S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG			S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM			S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0		S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1		S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2		S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3		S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG		S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D			S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D			S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER		S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI		S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1		S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC			S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC		S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0		S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1		S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2		S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97		S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0		S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1		S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC			S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN		S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG			S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC			S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX		S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX		S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+
+#define NR_IRQS 		(IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 00000000000..80d6dd942cb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+	generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= (void *)S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= (void *)S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= (void *)S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= (void *)S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP	0x30
+#define S3C64XX_UINTSP	0x34
+#define S3C64XX_UINTM	0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+	void __iomem *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+	int i;
+	int uart, irq;
+
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	for (i = 0; i < num; i++)
+		vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+				vic_valid[i], 0);
+
+	/* add the timer sub-irqs */
+
+	set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+	set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+	set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+	set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+	set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+		set_irq_chip(irq, &s3c_irq_timer);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+		s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
-- 
cgit v1.2.3


From c1cc3db8e9fcf1c9d2db3f34552c73996d3d8a13 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:56 +0900
Subject: ARM: S5PC100: Clock and PLL support

S5PC100 has 4 PLLs (APLL,MPLL,EPLL,HPLL) and 3 clock domains. Clock scheme is
implemented here.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/include/plat/pll.h        |   38 +
 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h |  421 +++++++++
 arch/arm/plat-s5pc1xx/s5pc100-clock.c           | 1139 +++++++++++++++++++++++
 3 files changed, 1598 insertions(+)
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/pll.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-clock.c

(limited to 'arch')

diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 00000000000..21afef1573e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT	(16)
+#define S5P_PLL_PDIV_SHIFT	(8)
+#define S5P_PLL_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 00000000000..75c8390cb82
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN     (1<<31)
+#define S5PC1XX_EPLL_MASK   0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
+#define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
+#define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT		(20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK		(0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT		(0)
+#define S5PC100_CLKSRC1_SPI0_MASK		(0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT		(4)
+#define S5PC100_CLKSRC1_SPI1_MASK		(0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT		(8)
+#define S5PC100_CLKSRC1_SPI2_MASK		(0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT		(12)
+#define S5PC100_CLKSRC1_IRDA_MASK		(0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT		(16)
+#define S5PC100_CLKSRC1_UHOST_MASK		(0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT		(20)
+#define S5PC100_CLKSRC1_CLK48M_MASK		(0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK		(0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT		(0)
+#define S5PC100_CLKSRC2_MMC1_MASK		(0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT		(4)
+#define S5PC100_CLKSRC2_MMC2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT		(8)
+#define S5PC100_CLKSRC2_LCD_MASK		(0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT		(12)
+#define S5PC100_CLKSRC2_FIMC0_MASK		(0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT		(16)
+#define S5PC100_CLKSRC2_FIMC1_MASK		(0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT		(20)
+#define S5PC100_CLKSRC2_FIMC2_MASK		(0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT		(24)
+#define S5PC100_CLKSRC2_MIXER_MASK		(0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT		(28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK		(0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT		(0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK		(0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKSRC3_I2SD2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT		(8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK		(0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK		(0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK		(0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT	(20)
+#define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT		(4)
+#define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT		(8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK		(0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT	(12)
+#define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
+#define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT		(8)
+#define S5PC100_CLKDIV1_D1_MASK		(0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT		(12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
+#define S5PC100_CLKDIV1_ONENAND_MASK	(0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT	(20)
+#define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT		(24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK		(0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT		(0)
+#define S5PC100_CLKDIV2_SPI0_MASK		(0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT		(4)
+#define S5PC100_CLKDIV2_SPI1_MASK		(0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT		(8)
+#define S5PC100_CLKDIV2_SPI2_MASK		(0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT		(12)
+#define S5PC100_CLKDIV2_IRDA_MASK		(0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT		(16)
+#define S5PC100_CLKDIV2_UHOST_MASK		(0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT		(20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK		(0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT		(0)
+#define S5PC100_CLKDIV3_MMC1_MASK		(0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT		(4)
+#define S5PC100_CLKDIV3_MMC2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT		(8)
+#define S5PC100_CLKDIV3_LCD_MASK		(0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT		(12)
+#define S5PC100_CLKDIV3_FIMC0_MASK		(0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT		(16)
+#define S5PC100_CLKDIV3_FIMC1_MASK		(0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT		(20)
+#define S5PC100_CLKDIV3_FIMC2_MASK		(0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT		(24)
+#define S5PC100_CLKDIV3_HDMI_MASK		(0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT		(28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK		(0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT		(0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK		(0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKDIV4_I2SD2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT		(8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK		(0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK		(0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC		(1<<0)
+#define S5PC100_CLKGATE_D00_TZIC		(1<<1)
+#define S5PC100_CLKGATE_D00_CFCON		(1<<2)
+#define S5PC100_CLKGATE_D00_MDMA		(1<<3)
+#define S5PC100_CLKGATE_D00_G2D		(1<<4)
+#define S5PC100_CLKGATE_D00_SECSS		(1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS		(1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC		(1<<0)
+#define S5PC100_CLKGATE_D01_SROMC		(1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND		(1<<2)
+#define S5PC100_CLKGATE_D01_NFCON		(1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM		(1<<4)
+#define S5PC100_CLKGATE_D01_EBI		(1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY		(1<<1)
+#define S5PC100_CLKGATE_D02_SDM		(1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0		(1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1		(1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST		(1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG		(1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF		(1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0		(1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1		(1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2		(1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD		(1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR		(1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0		(1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1		(1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2		(1<<4)
+#define S5PC100_CLKGATE_D11_JPEG		(1<<5)
+#define S5PC100_CLKGATE_D11_DSI		(1<<6)
+#define S5PC100_CLKGATE_D11_CSI		(1<<7)
+#define S5PC100_CLKGATE_D11_G3D		(1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV		(1<<0)
+#define S5PC100_CLKGATE_D12_VP		(1<<1)
+#define S5PC100_CLKGATE_D12_MIXER		(1<<2)
+#define S5PC100_CLKGATE_D12_HDMI		(1<<3)
+#define S5PC100_CLKGATE_D12_MFC		(1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID		(1<<0)
+#define S5PC100_CLKGATE_D13_GPIO		(1<<1)
+#define S5PC100_CLKGATE_D13_APC		(1<<2)
+#define S5PC100_CLKGATE_D13_IEC		(1<<3)
+#define S5PC100_CLKGATE_D13_PWM		(1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER	(1<<7)
+#define S5PC100_CLKGATE_D13_WDT		(1<<8)
+#define S5PC100_CLKGATE_D13_RTC		(1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0		(1<<0)
+#define S5PC100_CLKGATE_D14_UART1		(1<<1)
+#define S5PC100_CLKGATE_D14_UART2		(1<<2)
+#define S5PC100_CLKGATE_D14_UART3		(1<<3)
+#define S5PC100_CLKGATE_D14_IIC		(1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC	(1<<5)
+#define S5PC100_CLKGATE_D14_SPI0		(1<<6)
+#define S5PC100_CLKGATE_D14_SPI1		(1<<7)
+#define S5PC100_CLKGATE_D14_SPI2		(1<<8)
+#define S5PC100_CLKGATE_D14_IRDA		(1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0		(1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1		(1<<11)
+#define S5PC100_CLKGATE_D14_HSITX		(1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX		(1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0		(1<<0)
+#define S5PC100_CLKGATE_D15_IIS1		(1<<1)
+#define S5PC100_CLKGATE_D15_IIS2		(1<<2)
+#define S5PC100_CLKGATE_D15_AC97		(1<<3)
+#define S5PC100_CLKGATE_D15_PCM0		(1<<4)
+#define S5PC100_CLKGATE_D15_PCM1		(1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF		(1<<6)
+#define S5PC100_CLKGATE_D15_TSADC		(1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF		(1<<8)
+#define S5PC100_CLKGATE_D15_CG		(1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2		(1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
+#define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
+#define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
+#define	S5PC100_CLKGATE_SCLK0_SPI1		(1<<5)
+#define	S5PC100_CLKGATE_SCLK0_SPI2		(1<<6)
+#define	S5PC100_CLKGATE_SCLK0_SPI0_48	(1<<7)
+#define	S5PC100_CLKGATE_SCLK0_SPI1_48	(1<<8)
+#define	S5PC100_CLKGATE_SCLK0_SPI2_48	(1<<9)
+#define	S5PC100_CLKGATE_SCLK0_IRDA		(1<<10)
+#define	S5PC100_CLKGATE_SCLK0_USBHOST	(1<<11)
+#define	S5PC100_CLKGATE_SCLK0_MMC0		(1<<12)
+#define	S5PC100_CLKGATE_SCLK0_MMC1		(1<<13)
+#define	S5PC100_CLKGATE_SCLK0_MMC2		(1<<14)
+#define	S5PC100_CLKGATE_SCLK0_MMC0_48	(1<<15)
+#define	S5PC100_CLKGATE_SCLK0_MMC1_48	(1<<16)
+#define	S5PC100_CLKGATE_SCLK0_MMC2_48	(1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define	S5PC100_CLKGATE_SCLK1_LCD		(1<<0)
+#define	S5PC100_CLKGATE_SCLK1_FIMC0		(1<<1)
+#define	S5PC100_CLKGATE_SCLK1_FIMC1		(1<<2)
+#define	S5PC100_CLKGATE_SCLK1_FIMC2		(1<<3)
+#define	S5PC100_CLKGATE_SCLK1_TV54		(1<<4)
+#define	S5PC100_CLKGATE_SCLK1_VDAC54	(1<<5)
+#define	S5PC100_CLKGATE_SCLK1_MIXER		(1<<6)
+#define	S5PC100_CLKGATE_SCLK1_HDMI		(1<<7)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO0	(1<<8)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO1	(1<<9)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO2	(1<<10)
+#define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
+#define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
+#define S5PC100_CFG_WFI_IDLE	(1<<5)
+#define S5PC100_CFG_WFI_STOP	(2<<5)
+#define S5PC100_CFG_WFI_SLEEP	(3<<5)
+
+#define S5PC100_OTHER_SYS_INT	24
+#define S5PC100_OTHER_STA_TYPE	23
+#define STA_TYPE_EXPON		0
+#define STA_TYPE_SFR		1
+
+#define S5PC100_PWR_STA_EXP_SCALE	0
+#define S5PC100_PWR_STA_CNT		4
+
+#define S5PC100_PWR_STABLE_COUNT	85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN	0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN	(1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN	(1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 00000000000..6b24035172f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+
+struct clk_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+struct clksrc_clk {
+	struct clk		clk;
+	unsigned int		mask;
+	unsigned int		shift;
+
+	struct clk_sources	*sources;
+
+	unsigned int		divider_shift;
+	void __iomem		*reg_divider;
+	void __iomem		*reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 1;
+}
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC1XX_CLK_SRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC1XX_CLK_SRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+struct clk clk_hpll = {
+	.name		= "hpll",
+	.id		= -1,
+};
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan0",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan1",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	},
+};
+
+static struct clk init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "keyif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 1 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+
+	/* Special Clocks 2 */
+	{
+		.name		= "sclk_tv_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
+	}, {
+		.name		= "sclk_vdac_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
+	}, {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
+	},
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
+	.sources	= &clk_src_apll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.sources	= &clk_src_epll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+	return rate;
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+	return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+	clkdiv >>= sclk->divider_shift;
+	clkdiv &= 0xf;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_divider;
+	unsigned int div;
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~(0xf << sclk->shift);
+	val |= (div - 1) << sclk->shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clk_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_source);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clksrc &= ~sclk->mask;
+		clksrc |= src_nr << sclk->shift;
+
+		__raw_writel(clksrc, sclk->reg_source);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		rate = parent_rate;
+	else {
+		div = rate / parent_rate;
+
+		if (div == 0)
+			div = 1;
+		if (div > 16)
+			div = 16;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+	.clk	= {
+		.name		= "uclk1",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.set_parent	= s5pc1xx_setparent_clksrc,
+		.get_rate	= s5pc1xx_getrate_clksrc,
+		.set_rate	= s5pc1xx_setrate_clksrc,
+		.round_rate	= s5pc1xx_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UART_MASK,
+	.sources	= &clkset_uart,
+	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
+	.reg_divider	= S5PC1XX_CLK_DIV2,
+	.reg_source	= S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+	struct clk_sources *srcs = clk->sources;
+	u32 clksrc = __raw_readl(clk->reg_source);
+
+	clksrc &= clk->mask;
+	clksrc >>= clk->shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+	       clk->clk.name, clk->clk.parent->name, clksrc,
+	       clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long hclkd0;
+	unsigned long hclk;
+	unsigned long pclkd0;
+	unsigned long pclk;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long hpll;
+	unsigned long epll;
+	unsigned int ptr;
+	u32 clkdiv0, clkdiv1;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+			__func__, clkdiv0, clkdiv1);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+	       apll, mpll, epll, hpll);
+
+	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+	       armclk, hclkd0, pclkd0, hclk, pclk);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_mout_epll.clk,
+	&clk_fout_epll,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_uart_uclk1.clk,
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clk_mpll.parent = &clk_mout_mpll.clk;
+	clk_epll.parent = &clk_mout_epll.clk;
+}
-- 
cgit v1.2.3


From 5a7652f2032b88106c9ba41edf0fb795397008bd Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:42 +0900
Subject: ARM: S5PC100: Kconfigs and Makefiles

S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is
successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C
families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific
drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100"

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: tidy and edit description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                              | 13 +++++++
 arch/arm/Makefile                             |  2 ++
 arch/arm/mach-s5pc100/Kconfig                 | 22 ++++++++++++
 arch/arm/mach-s5pc100/Makefile                | 17 +++++++++
 arch/arm/mach-s5pc100/Makefile.boot           |  2 ++
 arch/arm/mach-s5pc100/include/mach/hardware.h |  2 +-
 arch/arm/plat-s5pc1xx/Kconfig                 | 50 +++++++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/Makefile                | 26 ++++++++++++++
 8 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s5pc100/Kconfig
 create mode 100644 arch/arm/mach-s5pc100/Makefile
 create mode 100644 arch/arm/mach-s5pc100/Makefile.boot
 create mode 100644 arch/arm/plat-s5pc1xx/Kconfig
 create mode 100644 arch/arm/plat-s5pc1xx/Makefile

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f07a4ba281b..be89ab3aacf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -588,6 +588,14 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+	bool "Samsung S5PC1XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select CPU_V7
+	help
+	  Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -698,6 +706,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -715,6 +724,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..96659415953 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
@@ -168,6 +169,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 00000000000..b1a4ba50441
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+	bool
+	select CPU_S5PC100_INIT
+	select CPU_S5PC100_CLOCK
+	help
+	  Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+	bool "SMDKC100"
+	select CPU_S5PC100
+	select S5PC1XX_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 00000000000..afc89b381d7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 00000000000..ff90aa13bd6
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
index 38ce8206a1a..6b38618c2fd 100644
--- a/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S3C6400 - Hardware support
+ * S5PC100 - Hardware support
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 00000000000..a8a711c3c06
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+	bool
+	depends on ARCH_S5PC1XX
+	default y
+	select PLAT_S3C
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	help
+	  Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+	bool
+	help
+	  Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+	bool
+	help
+	  Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 00000000000..f1ecb2c37ee
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT)	+= s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-- 
cgit v1.2.3


From e119766f4e15274e2cd9bb5f25119c8b008d920b Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:28 +0900
Subject: ARM: S5PC100: Board and configuration file

SMDKC100 board support.
The board can be obtained from meritech (http://www.meritech.co.kr)

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: fixup subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s5pc100_defconfig    | 892 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-s5pc100/mach-smdkc100.c | 103 ++++
 2 files changed, 995 insertions(+)
 create mode 100644 arch/arm/configs/s5pc100_defconfig
 create mode 100644 arch/arm/mach-s5pc100/mach-smdkc100.c

(limited to 'arch')

diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 00000000000..b0d7d3d3a5e
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul  1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 00000000000..214093cd763
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+	s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+	/* Maintainer: Byungho Min <bhmin@samsung.com> */
+	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5PC100_PA_SDRAM + 0x100,
+
+	.init_irq	= s5pc100_init_irq,
+	.map_io		= smdkc100_map_io,
+	.init_machine	= smdkc100_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From db616eb67604242c11bfbb331bb143bfe4a2e386 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 16 Aug 2009 23:54:58 +0100
Subject: ARM: S3C: Add S3C_DEV_NAND Kconfig entry

Currently the S5PC100 does not define S3C_PA_NAND, leaving the NAND device
definitions in arch/arm/plat-s3c/dev-nand.c unbuildable. Add a KConfig
entry to select whether this is built.

As backwards compatibility, both the S3C24XX and S3C64XX define the new
configuration in their main Kconfig files until better support for basing
this selection on a per-machine basis can be sorted out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Kconfig     | 5 +++++
 arch/arm/plat-s3c/Makefile    | 2 +-
 arch/arm/plat-s3c24xx/Kconfig | 1 +
 arch/arm/plat-s3c64xx/Kconfig | 1 +
 4 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469..8931c5f0e46 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
 	help
 	  Compile in platform device definition for USB high-speed OtG
 
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index f32d045e7e3..3c09109e9e8 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -41,4 +41,4 @@ obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-y				+= dev-nand.o
+obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2f914568359..9c7aca48964 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select S3C_DEVICE_NAND
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b425a5..bcfa778614d 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
-- 
cgit v1.2.3


From baa28e3530375e0bef2c53243634a1c78f5c02f3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 15:11:29 +0100
Subject: ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ

The show_fiq_list() call in arch/arm/kernel/irq.c currently depends on
CONFIG_ARCH_ACORN, but this is not the only architecture that supports
the usage of FIQ. Change to calling this if CONFIG_FIQ is set (which
is what arch/arm/kernel/fiq.c is built by).

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490eaa2..c9a8619f385 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
 unlock:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From 48e46b7b311c54525712c28004f0a59f2c931d30 Mon Sep 17 00:00:00 2001
From: Jurij Smakov <jurij@wooyd.org>
Date: Sun, 16 Aug 2009 18:21:47 -0700
Subject: sparc64: build compressed image (zImage) by default

Besides creating the uncompressed vmlinux image for sparc64, also
create a compressed zImage. This is more consistent with other
architectures and required to make the 'deb-pkg' target work.

Signed-off-by: Jurij Smakov <jurij@wooyd.org>
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Makefile      | 12 ++++++------
 arch/sparc/boot/Makefile |  3 +++
 2 files changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 2003ded054c..467221dd570 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -38,10 +38,6 @@ CPPFLAGS_vmlinux.lds += -m32
 #  Actual linking is done with "make image".
 LDFLAGS_vmlinux = -r
 
-# Default target
-all: zImage
-
-
 else
 #####
 # sparc64
@@ -91,6 +87,9 @@ endif
 
 boot := arch/sparc/boot
 
+# Default target
+all: zImage
+
 image zImage tftpboot.img vmlinux.aout: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
@@ -109,8 +108,9 @@ define archhelp
 endef
 else
 define archhelp
-  echo  '* vmlinux       - Standard sparc64 kernel'
-  echo  '  vmlinux.aout  - a.out kernel for sparc64'
+  echo  '* vmlinux      - standard sparc64 kernel'
+  echo  '* zImage       - stripped and compressed sparc64 kernel ($(boot)/zImage)'
+  echo  '  vmlinux.aout - a.out kernel for sparc64'
   echo  '  tftpboot.img - image prepared for tftp'
 endef
 endif
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 1ff0fd92475..97e3feb9ff1 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -79,6 +79,9 @@ $(obj)/image: vmlinux FORCE
 	$(call if_changed,strip)
 	@echo '  kernel: $@ is ready'
 
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,gzip)
+
 $(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
-- 
cgit v1.2.3


From 3f389635102e0dd2f85ebfe7fd549942b5bbc33b Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 12 Aug 2009 22:49:47 +0000
Subject: SPARC: fix duplicate declaration

Only difference for 32 and 64 bit version is dma64_addr_t and rest is same.

Also fixed the following 'make includecheck' warning:

  arch/sparc/include/asm/types.h: asm-generic/int-ll64.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/types.h | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
index de671d73bae..09c79a9c851 100644
--- a/arch/sparc/include/asm/types.h
+++ b/arch/sparc/include/asm/types.h
@@ -8,9 +8,8 @@
  * need to be careful to avoid a name clashes.
  */
 
-#if defined(__sparc__) && defined(__arch64__)
+#if defined(__sparc__)
 
-/*** SPARC 64 bit ***/
 #include <asm-generic/int-ll64.h>
 
 #ifndef __ASSEMBLY__
@@ -26,33 +25,21 @@ typedef unsigned short umode_t;
 /* Dma addresses come in generic and 64-bit flavours.  */
 
 typedef u32 dma_addr_t;
-typedef u64 dma64_addr_t;
 
-#endif /* __ASSEMBLY__ */
+#if defined(__arch64__)
 
-#endif /* __KERNEL__ */
+/*** SPARC 64 bit ***/
+typedef u64 dma64_addr_t;
 #else
-
 /*** SPARC 32 bit ***/
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-typedef u32 dma_addr_t;
 typedef u32 dma64_addr_t;
 
+#endif /* defined(__arch64__) */
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
 
-#endif /* defined(__sparc__) && defined(__arch64__) */
+#endif /* defined(__sparc__) */
 
 #endif /* defined(_SPARC_TYPES_H) */
-- 
cgit v1.2.3


From 8abf9196008a7f06841b10769d1aed3f28c1d314 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 13 Aug 2009 10:05:43 +0000
Subject: sparc64: cheaper asm/uaccess.h inclusion

sched.h inclusion is definitely not needed like in 32-bit version,
remove it, fixup compilation.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/uaccess_64.h | 2 +-
 arch/sparc/kernel/sysfs.c           | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index a38c0323891..9ea271e19c7 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -7,8 +7,8 @@
 
 #ifdef __KERNEL__
 #include <linux/compiler.h>
-#include <linux/sched.h>
 #include <linux/string.h>
+#include <linux/thread_info.h>
 #include <asm/asi.h>
 #include <asm/system.h>
 #include <asm/spitfire.h>
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index d28f496f466..ca39c606fe8 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -2,6 +2,7 @@
  *
  * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
  */
+#include <linux/sched.h>
 #include <linux/sysdev.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
-- 
cgit v1.2.3


From c7f6fa44115d401e89db730f357629d39f8e4ba6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 28 Jul 2009 23:52:54 +0200
Subject: x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs

On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold
boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog):

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 BANK 1 MCG status:
MCi status:
Error overflow
Uncorrected error
Error enabled
Processor context corrupt
MCA: Data CACHE Level-1 UNKNOWN Error
STATUS f200000000000195 MCGSTATUS 0

[ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error)
  and f200000000000115 (... READ Error).

  To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified
  the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump
  content of STATUS MSR before it is cleared during initialization. ]

Since the bogus MCE results in a kernel taint (which in turn disables
lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs
by default ("mce=bootlog" boot parameter can be be used to get the old
behavior).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 1cfb623ce11..a0c2910d96a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1273,6 +1273,10 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 		if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
 			monarch_timeout < 0)
 			monarch_timeout = USEC_PER_SEC;
+
+		/* There are also broken BIOSes on some Pentium M systems. */
+		if (c->x86 == 6 && c->x86_model == 13 && mce_bootlog < 0)
+			mce_bootlog = 0;
 	}
 	if (monarch_timeout < 0)
 		monarch_timeout = 0;
-- 
cgit v1.2.3


From e412cd257e0d51e0ecbb89f50953835b5a0681b2 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 17 Aug 2009 10:19:00 +0200
Subject: x86, mce: Don't initialize MCEs on unknown CPUs

An older test-box started hanging at the following point during
bootup:

 [    0.022996] Mount-cache hash table entries: 512
 [    0.024996] Initializing cgroup subsys debug
 [    0.025996] Initializing cgroup subsys cpuacct
 [    0.026995] Initializing cgroup subsys devices
 [    0.027995] Initializing cgroup subsys freezer
 [    0.028995] mce: CPU supports 5 MCE banks

I've bisected it down to commit 4efc0670 ("x86, mce: use 64bit
machine check code on 32bit"), which utilizes the MCE code on
32-bit systems too.

The problem is caused by this detail in my config:

  # CONFIG_CPU_SUP_INTEL is not set

This disables the quirks in mce_cpu_quirks() but still enables
MCE support - which then hangs due to the missing quirk
workaround needed on this CPU:

	if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0)
		mce_banks[0].init = 0;

The safe solution is to not initialize MCEs if we dont know on
what CPU we are running (or if that CPU's support code got
disabled in the config).

Also be a bit more defensive on 32-bit systems: dont do a
boot-time dump of pending MCEs not just on the specific system
that we found a problem with (Pentium-M), but earlier ones as
well.

Now this problem is probably not common and disabling CPU
support is rare - but still being more defensive in something
we turned on for a wide range of CPUs is prudent.

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: Message-ID: <4A88E3E4.40506@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index a0c2910d96a..01213048f62 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1226,8 +1226,13 @@ static void mce_init(void)
 }
 
 /* Add per CPU specific workarounds here */
-static void mce_cpu_quirks(struct cpuinfo_x86 *c)
+static int mce_cpu_quirks(struct cpuinfo_x86 *c)
 {
+	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
+		pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
+		return -EOPNOTSUPP;
+	}
+
 	/* This should be disabled by the BIOS, but isn't always */
 	if (c->x86_vendor == X86_VENDOR_AMD) {
 		if (c->x86 == 15 && banks > 4) {
@@ -1274,14 +1279,19 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c)
 			monarch_timeout < 0)
 			monarch_timeout = USEC_PER_SEC;
 
-		/* There are also broken BIOSes on some Pentium M systems. */
-		if (c->x86 == 6 && c->x86_model == 13 && mce_bootlog < 0)
+		/*
+		 * There are also broken BIOSes on some Pentium M and
+		 * earlier systems:
+		 */
+		if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0)
 			mce_bootlog = 0;
 	}
 	if (monarch_timeout < 0)
 		monarch_timeout = 0;
 	if (mce_bootlog != 0)
 		mce_panic_timeout = 30;
+
+	return 0;
 }
 
 static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
@@ -1342,11 +1352,10 @@ void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
 	if (!mce_available(c))
 		return;
 
-	if (mce_cap_init() < 0) {
+	if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) {
 		mce_disabled = 1;
 		return;
 	}
-	mce_cpu_quirks(c);
 
 	machine_check_vector = do_machine_check;
 
-- 
cgit v1.2.3


From 87c62a66edd645a9b1ff1f9b00ab20c5a93d8845 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 14 Jul 2009 22:37:09 +0900
Subject: MIPS: Fix HPAGE_SIZE redefinition

This patch fixes warnings like this:
  CC      fs/proc/meminfo.o
In file included from /work/linux/include/linux/mmzone.h:20,
                 from /work/linux/include/linux/gfp.h:4,
                 from /work/linux/include/linux/mm.h:8,
                 from /work/linux/fs/proc/meminfo.c:5:
/work/linux/arch/mips/include/asm/page.h:36:1: warning: "HPAGE_SIZE" redefined
In file included from /work/linux/fs/proc/meminfo.c:2:
/work/linux/include/linux/hugetlb.h:107:1: warning: this is the location of the previous definition

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/page.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 96a14a426a7..4320239cf4e 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -32,10 +32,12 @@
 #define PAGE_SIZE	(1UL << PAGE_SHIFT)
 #define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
 
+#ifdef CONFIG_HUGETLB_PAGE
 #define HPAGE_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
 #define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#endif /* CONFIG_HUGETLB_PAGE */
 
 #ifndef __ASSEMBLY__
 
-- 
cgit v1.2.3


From 62a3207b8cf3de35368cdc3822b30b82d59eea95 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 17 Aug 2009 11:16:16 -0700
Subject: x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE

On 32 bits, we can have CONFIG_ACPI_SLEEP set without implying
CONFIG_X86_TRAMPOLINE.  In that case, we simply do not need to mark
the trampoline as a MAC region.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Shane Wang <shane.wang@intel.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
---
 arch/x86/kernel/tboot.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index a183beffe39..c2e760ca7b0 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -189,8 +189,12 @@ static int tboot_setup_sleep(void)
 
 	/* S3 resume code */
 	add_mac_region(acpi_wakeup_address, WAKEUP_SIZE);
+
+#ifdef CONFIG_X86_TRAMPOLINE
 	/* AP trampoline code */
 	add_mac_region(virt_to_phys(trampoline_base), TRAMPOLINE_SIZE);
+#endif
+
 	/* kernel code + data + bss */
 	add_mac_region(virt_to_phys(_text), _end - _text);
 
-- 
cgit v1.2.3


From b7f42ab2e237f08a5bbcefa17473e80eb05e725c Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 17 Aug 2009 11:19:40 -0700
Subject: x86, apic: Move dmar_table_init() out of enable_IR()

On an x2apic system, we got:

[    1.818072] ------------[ cut here ]------------
[    1.820376] WARNING: at kernel/lockdep.c:2461 lockdep_trace_alloc+0xa5/0xe9()
[    1.835282] Hardware name: ASSY,
[    1.839006] Modules linked in:
[    1.841253] Pid: 1, comm: swapper Not tainted 2.6.31-rc5-tip-03926-g39aaa80-dirty #510
[    1.858056] Call Trace:
[    1.859913]  [<ffffffff810d13aa>] ? lockdep_trace_alloc+0xa5/0xe9
[    1.876270]  [<ffffffff81093f37>] warn_slowpath_common+0x8d/0xd0
[    1.879132]  [<ffffffff81093fa1>] warn_slowpath_null+0x27/0x3d
[    1.896823]  [<ffffffff810d13aa>] lockdep_trace_alloc+0xa5/0xe9
[    1.900659]  [<ffffffff810cf5a0>] ? lock_release_holdtime+0x2f/0x199
[    1.917188]  [<ffffffff81167a3c>] kmem_cache_alloc_notrace+0x42/0x111
[    1.922320]  [<ffffffff8106fe8c>] ? reserve_memtype+0x152/0x518
[    1.938137]  [<ffffffff8106f8b1>] ? pat_pagerange_is_ram+0x4a/0x91
[    1.941730]  [<ffffffff8106fe8c>] reserve_memtype+0x152/0x518
[    1.958115]  [<ffffffff8106ce62>] __ioremap_caller+0x1dd/0x30f
[    1.975507]  [<ffffffff81ce2c5c>] ? acpi_os_map_memory+0x2a/0x47
[    1.978987]  [<ffffffff8106d0fd>] ioremap_nocache+0x2a/0x40
[    2.031400]  [<ffffffff810d0364>] ? trace_hardirqs_off+0x20/0x36
[    2.036096]  [<ffffffff81ce2c5c>] acpi_os_map_memory+0x2a/0x47
[    2.046263]  [<ffffffff815cd642>] acpi_tb_verify_table+0x3d/0x85
[    2.050349]  [<ffffffff81d34af7>] ? _spin_unlock_irqrestore+0x50/0x76
[    2.067327]  [<ffffffff815ccad6>] acpi_get_table_with_size+0x64/0xd9
[    2.070860]  [<ffffffff81d34af7>] ? _spin_unlock_irqrestore+0x50/0x76
[    2.088000]  [<ffffffff825c88d5>] dmar_table_detect+0x33/0x70
[    2.092047]  [<ffffffff825c8a01>] dmar_table_init+0x43/0x428
[    2.106854]  [<ffffffff825a7537>] enable_IR+0x1c/0x8d
[    2.110256]  [<ffffffff825a7624>] enable_IR_x2apic+0x7c/0x19e
[    2.127139]  [<ffffffff825a4876>] native_smp_prepare_cpus+0x139/0x3b8
[    2.145175]  [<ffffffff8259678d>] kernel_init+0x71/0x1da
[    2.148913]  [<ffffffff8104305a>] child_rip+0xa/0x20
[    2.152349]  [<ffffffff810429fc>] ? restore_args+0x0/0x30
[    2.167931]  [<ffffffff8259671c>] ? kernel_init+0x0/0x1da
[    2.171671]  [<ffffffff81043050>] ? child_rip+0x0/0x20
[    2.187607] ---[ end trace a7919e7f17c0a725 ]---

Venkatesh Pallipadi said:

| Looks like the problem started with this commit
|
| commit ce69a784504222c3ab6f1b3c357d09ec5772127a
| Author: Gleb Natapov <gleb@redhat.com>
| Date:   Mon Jul 20 15:24:17 2009 +0300
|
| x86/apic: Enable x2APIC without interrupt remapping under KVM
|
| Before this commit, dmar_table_init() was getting called
| with interrupts enabled and after this commit, it is getting
| called with interrupts disabled.

so try to move out dmar_table_init out of that function.

Analyzed-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
LKML-Reference: <4A899F3C.2050104@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index de039fcdd05..3fc3a6c428d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1365,14 +1365,6 @@ void enable_x2apic(void)
 int __init enable_IR(void)
 {
 #ifdef CONFIG_INTR_REMAP
-	int ret;
-
-	ret = dmar_table_init();
-	if (ret) {
-		pr_debug("dmar_table_init() failed with %d:\n", ret);
-		return 0;
-	}
-
 	if (!intr_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
 		return 0;
@@ -1400,6 +1392,14 @@ void __init enable_IR_x2apic(void)
 	unsigned long flags;
 	struct IO_APIC_route_entry **ioapic_entries = NULL;
 	int ret, x2apic_enabled = 0;
+	int dmar_table_init_ret = 0;
+
+#ifdef CONFIG_INTR_REMAP
+	dmar_table_init_ret = dmar_table_init();
+	if (dmar_table_init_ret)
+		pr_debug("dmar_table_init() failed with %d:\n",
+				dmar_table_init_ret);
+#endif
 
 	ioapic_entries = alloc_ioapic_entries();
 	if (!ioapic_entries) {
@@ -1417,7 +1417,11 @@ void __init enable_IR_x2apic(void)
 	mask_8259A();
 	mask_IO_APIC_setup(ioapic_entries);
 
-	ret = enable_IR();
+	if (dmar_table_init_ret)
+		ret = 0;
+	else
+		ret = enable_IR();
+
 	if (!ret) {
 		/* IR is required if there is APIC ID > 255 even when running
 		 * under KVM
-- 
cgit v1.2.3


From 65cec8e3db606608fd1f8dfc4a1c7c37bfba9173 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 17 Aug 2009 20:02:06 +0100
Subject: ARM: implement highpte

Add the ARM implementation of highpte, which allows PTE tables to be
placed in highmem.  Unfortunately, we do not offer highpte support
when support for L2 cache is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig               |  5 +++++
 arch/arm/include/asm/pgalloc.h | 16 ++++++++++++----
 arch/arm/include/asm/pgtable.h | 17 +++++++++++++----
 arch/arm/mm/fault.c            |  1 +
 4 files changed, 31 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..370f4778712 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1054,6 +1054,11 @@ config HIGHMEM
 
 	  If unsure, say n.
 
+config HIGHPTE
+	bool "Allocate 2nd-level pagetables from highmem"
+	depends on HIGHMEM
+	depends on !OUTER_CACHE
+
 source "mm/Kconfig"
 
 config LEDS
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64bf182..b12cc98bbe0 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
 #define pgd_alloc(mm)			get_pgd_slow(mm)
 #define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
 
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
 /*
  * Allocate one PTE table.
  *
@@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
 {
 	pte_t *pte;
 
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
 	if (pte) {
 		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
 		pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
 	struct page *pte;
 
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+	pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
 	if (pte) {
-		void *page = page_address(pte);
-		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		if (!PageHighMem(pte)) {
+			void *page = page_address(pte);
+			clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		}
 		pgtable_page_ctor(pte);
 	}
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9655bce3d34..201ccaa11f6 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -262,10 +262,19 @@ extern struct page *empty_zero_page;
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 #define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
+
+#define pte_offset_map(dir,addr)	(__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte)			__pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte)		__pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km)	pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km)	do { } while (0)
+#else
+#define __pte_map(dir,km)	((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km)	kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..5fa8dea5a37 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/highmem.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 1adcaafe7414c5731f758b158aa0525057225deb Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Mon, 17 Aug 2009 13:23:50 -0700
Subject: x86, pat: Allow ISA memory range uncacheable mapping requests

Max Vozeler reported:
>  Bug 13877 -  bogl-term broken with CONFIG_X86_PAT=y, works with =n
>
>  strace of bogl-term:
>  814   mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0)
>				 = -1 EAGAIN (Resource temporarily unavailable)
>  814   write(2, "bogl: mmaping /dev/fb0: Resource temporarily unavailable\n",
>	       57) = 57

PAT code maps the ISA memory range as WB in the PAT attribute, so that
fixed range MTRR registers define the actual memory type (UC/WC/WT etc).

But the upper level is_new_memtype_allowed() API checks are failing,
as the request here is for UC and the return tracked type is WB (Tracked type is
WB as MTRR type for this legacy range potentially will be different for each
4k page).

Fix is_new_memtype_allowed() by always succeeding the ISA address range
checks, as the null PAT (WB) and def MTRR fixed range register settings
satisfy the memory type needs of the applications that map the ISA address
range.

Reported-and-Tested-by: Max Vozeler <xam@debian.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/pgtable.h | 12 ++++++++++--
 arch/x86/mm/pat.c              |  3 ++-
 2 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 3cc06e3fceb..16748077559 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_PGTABLE_H
 
 #include <asm/page.h>
+#include <asm/e820.h>
 
 #include <asm/pgtable_types.h>
 
@@ -269,9 +270,16 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 
 #define canon_pgprot(p) __pgprot(massage_pgprot(p))
 
-static inline int is_new_memtype_allowed(unsigned long flags,
-						unsigned long new_flags)
+static inline int is_new_memtype_allowed(u64 paddr, unsigned long size,
+					 unsigned long flags,
+					 unsigned long new_flags)
 {
+	/*
+	 * PAT type is always WB for ISA. So no need to check.
+	 */
+	if (is_ISA_range(paddr, paddr + size - 1))
+		return 1;
+
 	/*
 	 * Certain new memtypes are not allowed with certain
 	 * requested memtype:
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb2806..352aa9e927e 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -623,7 +623,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 		return ret;
 
 	if (flags != want_flags) {
-		if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+		if (strict_prot ||
+		    !is_new_memtype_allowed(paddr, size, want_flags, flags)) {
 			free_memtype(paddr, paddr + size);
 			printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
 				" for %Lx-%Lx, got %s\n",
-- 
cgit v1.2.3


From 309214af53f030e0664aea011a9f628c5eb9cc2d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 17 Aug 2009 09:27:29 +0000
Subject: sh: rework SuperH Mobile sleep code exception handling

This patch updates the exception handling in the sleep code
for SuperH Mobile. With the patch applied the sleep code
always rewrites the VBR and resumes from the exception vector,
re-initializes hardware and jumps straight to the original
interrupt vector.

Tested on sh7722 and sh7724 with "Sleep Mode", "Sleep Mode + SF"
and "Software Standby Mode + SF" with CONFIG_SUSPEND.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/shmobile/pm.c    |  16 +---
 arch/sh/kernel/cpu/shmobile/sleep.S | 155 ++++++++++++++++++++++++------------
 2 files changed, 107 insertions(+), 64 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index de078d24ce5..ee3c2aaf66f 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -41,23 +41,11 @@ extern const unsigned int sh_mobile_standby_size;
 
 void sh_mobile_call_standby(unsigned long mode)
 {
-	extern void *vbr_base;
 	void *onchip_mem = (void *)ILRAM_BASE;
-	void (*standby_onchip_mem)(unsigned long) = onchip_mem;
-
-	/* Note: Wake up from sleep may generate exceptions!
-	 * Setup VBR to point to on-chip ram if self-refresh is
-	 * going to be used.
-	 */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
+	void (*standby_onchip_mem)(unsigned long, unsigned long) = onchip_mem;
 
 	/* Let assembly snippet in on-chip memory handle the rest */
-	standby_onchip_mem(mode);
-
-	/* Put VBR back in System RAM again */
-	if (mode & SUSP_SH_SF)
-		asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+	standby_onchip_mem(mode, ILRAM_BASE);
 }
 
 static int sh_pm_enter(suspend_state_t state)
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index baf2d7d46b0..a439e6c7824 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -16,19 +16,52 @@
 #include <asm/asm-offsets.h>
 #include <asm/suspend.h>
 
+/*
+ * Kernel mode register usage, see entry.S:
+ *	k0	scratch
+ *	k1	scratch
+ *	k4	scratch
+ */
+#define k0	r0
+#define k1	r1
+#define k4	r4
+
 /* manage self-refresh and enter standby mode.
  * this code will be copied to on-chip memory and executed from there.
  */
 
 	.balign 	4096,0,4096
 ENTRY(sh_mobile_standby)
+
+	/* save original vbr */
+	stc	vbr, r1
+	mova	saved_vbr, r0
+	mov.l	r1, @r0
+
+	/* point vbr to our on-chip memory page */
+	ldc	r5, vbr
+
+	/* save return address */
+	mova	saved_spc, r0
+	sts	pr, r5
+	mov.l	r5, @r0
+
+	/* save sr */
+	mova	saved_sr, r0
+	stc	sr, r5
+	mov.l	r5, @r0
+
+	/* save mode flags */
+	mova	saved_mode, r0
+	mov.l	r4, @r0
+
+	/* put mode flags in r0 */
 	mov	r4, r0
 
 	tst	#SUSP_SH_SF, r0
 	bt	skip_set_sf
 #ifdef CONFIG_CPU_SUBTYPE_SH7724
 	/* DBSC: put memory in self-refresh mode */
-
 	mov.l	dben_reg, r4
 	mov.l	dben_data0, r1
 	mov.l	r1, @r4
@@ -60,14 +93,6 @@ ENTRY(sh_mobile_standby)
 #endif
 
 skip_set_sf:
-	tst	#SUSP_SH_SLEEP, r0
-	bt	test_standby
-
-	/* set mode to "sleep mode" */
-	bra	do_sleep
-	 mov	#0x00, r1
-
-test_standby:
 	tst	#SUSP_SH_STANDBY, r0
 	bt	test_rstandby
 
@@ -85,77 +110,107 @@ test_rstandby:
 
 test_ustandby:
 	tst	#SUSP_SH_USTANDBY, r0
-	bt	done_sleep
+	bt	force_sleep
 
 	/* set mode to "u-standby mode" */
-	mov	#0x10, r1
+	bra	do_sleep
+	 mov	#0x10, r1
 
-	/* fall-through */
+force_sleep:
+
+	/* set mode to "sleep mode" */
+	mov	#0x00, r1
 
 do_sleep:
 	/* setup and enter selected standby mode */
 	mov.l	5f, r4
 	mov.l	r1, @r4
+again:
 	sleep
+	bra	again
+	 nop
+
+restore_jump_vbr:
+	/* setup spc with return address to c code */
+	mov.l	saved_spc, k0
+	ldc	k0, spc
+
+	/* restore vbr */
+	mov.l	saved_vbr, k0
+	ldc	k0, vbr
+
+	/* setup ssr with saved sr */
+	mov.l	saved_sr, k0
+	ldc	k0, ssr
+
+	/* get mode flags */
+	mov.l	saved_mode, k0
 
 done_sleep:
 	/* reset standby mode to sleep mode */
-	mov.l	5f, r4
-	mov	#0x00, r1
-	mov.l	r1, @r4
+	mov.l	5f, k4
+	mov	#0x00, k1
+	mov.l	k1, @k4
 
-	tst	#SUSP_SH_SF, r0
+	tst	#SUSP_SH_SF, k0
 	bt	skip_restore_sf
 
 #ifdef CONFIG_CPU_SUBTYPE_SH7724
 	/* DBSC: put memory in auto-refresh mode */
+	mov.l	dbrfpdn0_reg, k4
+	mov.l	dbrfpdn0_data0, k1
+	mov.l	k1, @k4
 
-	mov.l	dbrfpdn0_reg, r4
-	mov.l	dbrfpdn0_data0, r1
-	mov.l	r1, @r4
-
-	/* sleep 140 ns */
-	nop
+	nop /* sleep 140 ns */
 	nop
 	nop
 	nop
 
-	mov.l	dbcmdcnt_reg, r4
-	mov.l	dbcmdcnt_data0, r1
-	mov.l	r1, @r4
+	mov.l	dbcmdcnt_reg, k4
+	mov.l	dbcmdcnt_data0, k1
+	mov.l	k1, @k4
 
-	mov.l	dbcmdcnt_reg, r4
-	mov.l	dbcmdcnt_data1, r1
-	mov.l	r1, @r4
+	mov.l	dbcmdcnt_reg, k4
+	mov.l	dbcmdcnt_data1, k1
+	mov.l	k1, @k4
 
-	mov.l	dben_reg, r4
-	mov.l	dben_data1, r1
-	mov.l	r1, @r4
+	mov.l	dben_reg, k4
+	mov.l	dben_data1, k1
+	mov.l	k1, @k4
 
-	mov.l	dbrfpdn0_reg, r4
-	mov.l	dbrfpdn0_data2, r1
-	mov.l	r1, @r4
+	mov.l	dbrfpdn0_reg, k4
+	mov.l	dbrfpdn0_data2, k1
+	mov.l	k1, @k4
 #else
 	/* SBSC: set auto-refresh mode */
-	mov.l	1f, r4
-	mov.l	@r4, r2
-	mov.l   4f, r3
-	and	r3, r2
-	mov.l	r2, @r4
-	mov.l	6f, r4
-	mov.l	7f, r1
-	mov.l	8f, r2
-	mov.l	@r4, r3
-	mov	#-1, r4
-	add	r4, r3
-	or	r2, r3
-	mov.l	r3, @r1
+	mov.l	1f, k4
+	mov.l	@k4, k0
+	mov.l   4f, k1
+	and	k1, k0
+	mov.l	k0, @k4
+	mov.l	6f, k4
+	mov.l	8f, k0
+	mov.l	@k4, k1
+	mov	#-1, k4
+	add	k4, k1
+	or	k1, k0
+	mov.l	7f, k1
+	mov.l	k0, @k1
 #endif
 skip_restore_sf:
-	rts
+	/* jump to vbr vector */
+	mov.l	saved_vbr, k0
+	mov.l	offset_vbr, k4
+	add	k4, k0
+	jmp	@k0
 	 nop
 
 	.balign 4
+saved_mode:	.long	0
+saved_spc:	.long	0
+saved_sr:	.long	0
+saved_vbr:	.long	0
+offset_vbr:	.long	0x600
 #ifdef CONFIG_CPU_SUBTYPE_SH7724
 dben_reg:	.long	0xfd000010 /* DBEN */
 dben_data0:	.long	0
@@ -178,12 +233,12 @@ dbcmdcnt_data1:	.long	4
 7:	.long   0xfe400018 /* RTCNT */
 8:	.long   0xa55a0000
 
+
 /* interrupt vector @ 0x600 */
 	.balign 	0x400,0,0x400
 	.long	0xdeadbeef
 	.balign 	0x200,0,0x200
-	/* sh7722 will end up here in sleep mode */
-	rte
+	bra	restore_jump_vbr
 	 nop
 sh_mobile_standby_end:
 
-- 
cgit v1.2.3


From 63cd91dfd4976cb9687b07e9a9864912631d2e08 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 17 Aug 2009 09:41:40 +0000
Subject: sh: SuperH Mobile Software Standby support for cpuidle

This patch adds "SuperH Mobile Standby Mode [SF]" to the list
of cpuidle sleep modes. If the software latency requirements
from cpuidle are met together with fulfilled hardware
requirements then deep sleep modes can be entered.

Tested on sh7722 and sh7724 with "Sleep Mode", "Sleep Mode + SF"
and "Software Standby Mode + SF" together with a multimedia
work load and flood ping without packet drop.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/shmobile/cpuidle.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
index 4afdd975cc6..1c504bd972c 100644
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -21,6 +21,7 @@
 static unsigned long cpuidle_mode[] = {
 	SUSP_SH_SLEEP, /* regular sleep mode */
 	SUSP_SH_SLEEP | SUSP_SH_SF, /* sleep mode + self refresh */
+	SUSP_SH_STANDBY | SUSP_SH_SF, /* software standby mode + self refresh */
 };
 
 static int cpuidle_sleep_enter(struct cpuidle_device *dev,
@@ -96,6 +97,16 @@ void sh_mobile_setup_cpuidle(void)
 	state->flags |= CPUIDLE_FLAG_TIME_VALID;
 	state->enter = cpuidle_sleep_enter;
 
+	state = &dev->states[i++];
+	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
+	strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", CPUIDLE_DESC_LEN);
+	state->exit_latency = 2300;
+	state->target_residency = 1 * 2;
+	state->power_usage = 1;
+	state->flags = 0;
+	state->flags |= CPUIDLE_FLAG_TIME_VALID;
+	state->enter = cpuidle_sleep_enter;
+
 	dev->state_count = i;
 
 	cpuidle_register_device(dev);
-- 
cgit v1.2.3


From 5213a780295895630530aebacdd19217a5379c9a Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:29 +0000
Subject: sparc,leon: CONFIG_SPARC_LEON option and leon specific files.

The macro CONFIG_SPARC_LEON will shield, if undefined, the sun-sparc
code from LEON specific code. In
particular include/asm/leon.h will get empty through #ifdef and
leon_kernel.c and leon_mm.c will not be compiled.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig                 |  11 ++
 arch/sparc/include/asm/leon.h      | 362 +++++++++++++++++++++++++++++++++++++
 arch/sparc/include/asm/leon_amba.h | 263 +++++++++++++++++++++++++++
 arch/sparc/kernel/leon_kernel.c    | 203 +++++++++++++++++++++
 arch/sparc/mm/leon_mm.c            | 260 ++++++++++++++++++++++++++
 5 files changed, 1099 insertions(+)
 create mode 100644 arch/sparc/include/asm/leon.h
 create mode 100644 arch/sparc/include/asm/leon_amba.h
 create mode 100644 arch/sparc/kernel/leon_kernel.c
 create mode 100644 arch/sparc/mm/leon_mm.c

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3f8b6a92eab..b847f880eec 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -437,6 +437,17 @@ config SERIAL_CONSOLE
 
 	  If unsure, say N.
 
+config SPARC_LEON
+	bool "Sparc Leon processor family"
+	depends on SPARC32
+	---help---
+	  If you say Y here if you are running on a SPARC-LEON processor.
+	  The LEON processor is a synthesizable VHDL model of the
+	  SPARC-v8 standard. LEON is  part of the GRLIB collection of
+	  IP cores that are distributed under GPL. GRLIB can be downloaded
+	  from www.gaisler.com. You can download a sparc-linux cross-compilation
+	  toolchain at www.gaisler.com.
+
 endmenu
 
 menu "Bus options (PCI etc.)"
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
new file mode 100644
index 00000000000..28a42b73f64
--- /dev/null
+++ b/arch/sparc/include/asm/leon.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2004 Konrad Eisele (eiselekd@web.de,konrad@gaisler.com) Gaisler Research
+ * Copyright (C) 2004 Stefan Holst (mail@s-holst.de) Uni-Stuttgart
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#ifndef LEON_H_INCLUDE
+#define LEON_H_INCLUDE
+
+#ifdef CONFIG_SPARC_LEON
+
+#define ASI_LEON_NOCACHE	0x01
+
+#define ASI_LEON_DCACHE_MISS	0x1
+
+#define ASI_LEON_CACHEREGS	0x02
+#define ASI_LEON_IFLUSH		0x10
+#define ASI_LEON_DFLUSH		0x11
+
+#define ASI_LEON_MMUFLUSH	0x18
+#define ASI_LEON_MMUREGS	0x19
+#define ASI_LEON_BYPASS		0x1c
+#define ASI_LEON_FLUSH_PAGE	0x10
+
+/* mmu register access, ASI_LEON_MMUREGS */
+#define LEON_CNR_CTRL		0x000
+#define LEON_CNR_CTXP		0x100
+#define LEON_CNR_CTX		0x200
+#define LEON_CNR_F		0x300
+#define LEON_CNR_FADDR		0x400
+
+#define LEON_CNR_CTX_NCTX	256	/*number of MMU ctx */
+
+#define LEON_CNR_CTRL_TLBDIS	0x80000000
+
+#define LEON_MMUTLB_ENT_MAX	64
+
+/*
+ * diagnostic access from mmutlb.vhd:
+ * 0: pte address
+ * 4: pte
+ * 8: additional flags
+ */
+#define LEON_DIAGF_LVL		0x3
+#define LEON_DIAGF_WR		0x8
+#define LEON_DIAGF_WR_SHIFT	3
+#define LEON_DIAGF_HIT		0x10
+#define LEON_DIAGF_HIT_SHIFT	4
+#define LEON_DIAGF_CTX		0x1fe0
+#define LEON_DIAGF_CTX_SHIFT	5
+#define LEON_DIAGF_VALID	0x2000
+#define LEON_DIAGF_VALID_SHIFT	13
+
+/*
+ *  Interrupt Sources
+ *
+ *  The interrupt source numbers directly map to the trap type and to
+ *  the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
+ *  and the Interrupt Pending Registers.
+ */
+#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR	1
+#define LEON_INTERRUPT_UART_1_RX_TX		2
+#define LEON_INTERRUPT_UART_0_RX_TX		3
+#define LEON_INTERRUPT_EXTERNAL_0		4
+#define LEON_INTERRUPT_EXTERNAL_1		5
+#define LEON_INTERRUPT_EXTERNAL_2		6
+#define LEON_INTERRUPT_EXTERNAL_3		7
+#define LEON_INTERRUPT_TIMER1			8
+#define LEON_INTERRUPT_TIMER2			9
+#define LEON_INTERRUPT_EMPTY1			10
+#define LEON_INTERRUPT_EMPTY2			11
+#define LEON_INTERRUPT_OPEN_ETH			12
+#define LEON_INTERRUPT_EMPTY4			13
+#define LEON_INTERRUPT_EMPTY5			14
+#define LEON_INTERRUPT_EMPTY6			15
+
+/* irq masks */
+#define LEON_HARD_INT(x)	(1 << (x))	/* irq 0-15 */
+#define LEON_IRQMASK_R		0x0000fffe	/* bit 15- 1 of lregs.irqmask */
+#define LEON_IRQPRIO_R		0xfffe0000	/* bit 31-17 of lregs.irqmask */
+
+/* leon uart register definitions */
+#define LEON_OFF_UDATA	0x0
+#define LEON_OFF_USTAT	0x4
+#define LEON_OFF_UCTRL	0x8
+#define LEON_OFF_USCAL	0xc
+
+#define LEON_UCTRL_RE	0x01
+#define LEON_UCTRL_TE	0x02
+#define LEON_UCTRL_RI	0x04
+#define LEON_UCTRL_TI	0x08
+#define LEON_UCTRL_PS	0x10
+#define LEON_UCTRL_PE	0x20
+#define LEON_UCTRL_FL	0x40
+#define LEON_UCTRL_LB	0x80
+
+#define LEON_USTAT_DR	0x01
+#define LEON_USTAT_TS	0x02
+#define LEON_USTAT_TH	0x04
+#define LEON_USTAT_BR	0x08
+#define LEON_USTAT_OV	0x10
+#define LEON_USTAT_PE	0x20
+#define LEON_USTAT_FE	0x40
+
+#define LEON_MCFG2_SRAMDIS		0x00002000
+#define LEON_MCFG2_SDRAMEN		0x00004000
+#define LEON_MCFG2_SRAMBANKSZ		0x00001e00	/* [12-9] */
+#define LEON_MCFG2_SRAMBANKSZ_SHIFT	9
+#define LEON_MCFG2_SDRAMBANKSZ		0x03800000	/* [25-23] */
+#define LEON_MCFG2_SDRAMBANKSZ_SHIFT	23
+
+#define LEON_TCNT0_MASK	0x7fffff
+
+#define LEON_USTAT_ERROR (LEON_USTAT_OV | LEON_USTAT_PE | LEON_USTAT_FE)
+/* no break yet */
+
+#define ASI_LEON3_SYSCTRL		0x02
+#define ASI_LEON3_SYSCTRL_ICFG		0x08
+#define ASI_LEON3_SYSCTRL_DCFG		0x0c
+#define ASI_LEON3_SYSCTRL_CFG_SNOOPING (1 << 27)
+#define ASI_LEON3_SYSCTRL_CFG_SSIZE(c) (1 << ((c >> 20) & 0xf))
+
+#ifndef __ASSEMBLY__
+
+/* do a virtual address read without cache */
+static inline unsigned long leon_readnobuffer_reg(unsigned long paddr)
+{
+	unsigned long retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r"(retval) : "r"(paddr), "i"(ASI_LEON_NOCACHE));
+	return retval;
+}
+
+/* do a physical address bypass write, i.e. for 0x80000000 */
+static inline void leon_store_reg(unsigned long paddr, unsigned long value)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : : "r"(value), "r"(paddr),
+			     "i"(ASI_LEON_BYPASS) : "memory");
+}
+
+/* do a physical address bypass load, i.e. for 0x80000000 */
+static inline unsigned long leon_load_reg(unsigned long paddr)
+{
+	unsigned long retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r"(retval) : "r"(paddr), "i"(ASI_LEON_BYPASS));
+	return retval;
+}
+
+extern inline void leon_srmmu_disabletlb(void)
+{
+	unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
+			     "i"(ASI_LEON_MMUREGS));
+	retval |= LEON_CNR_CTRL_TLBDIS;
+	__asm__ __volatile__("sta %0, [%%g0] %2\n\t" : : "r"(retval), "r"(0),
+			     "i"(ASI_LEON_MMUREGS) : "memory");
+}
+
+extern inline void leon_srmmu_enabletlb(void)
+{
+	unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
+			     "i"(ASI_LEON_MMUREGS));
+	retval = retval & ~LEON_CNR_CTRL_TLBDIS;
+	__asm__ __volatile__("sta %0, [%%g0] %2\n\t" : : "r"(retval), "r"(0),
+			     "i"(ASI_LEON_MMUREGS) : "memory");
+}
+
+/* macro access for leon_load_reg() and leon_store_reg() */
+#define LEON3_BYPASS_LOAD_PA(x)	    (leon_load_reg((unsigned long)(x)))
+#define LEON3_BYPASS_STORE_PA(x, v) (leon_store_reg((unsigned long)(x), (unsigned long)(v)))
+#define LEON3_BYPASS_ANDIN_PA(x, v) LEON3_BYPASS_STORE_PA(x, LEON3_BYPASS_LOAD_PA(x) & v)
+#define LEON3_BYPASS_ORIN_PA(x, v)  LEON3_BYPASS_STORE_PA(x, LEON3_BYPASS_LOAD_PA(x) | v)
+#define LEON_BYPASS_LOAD_PA(x)      leon_load_reg((unsigned long)(x))
+#define LEON_BYPASS_STORE_PA(x, v)  leon_store_reg((unsigned long)(x), (unsigned long)(v))
+#define LEON_REGLOAD_PA(x)          leon_load_reg((unsigned long)(x)+LEON_PREGS)
+#define LEON_REGSTORE_PA(x, v)      leon_store_reg((unsigned long)(x)+LEON_PREGS, (unsigned long)(v))
+#define LEON_REGSTORE_OR_PA(x, v)   LEON_REGSTORE_PA(x, LEON_REGLOAD_PA(x) | (unsigned long)(v))
+#define LEON_REGSTORE_AND_PA(x, v)  LEON_REGSTORE_PA(x, LEON_REGLOAD_PA(x) & (unsigned long)(v))
+
+/* macro access for leon_readnobuffer_reg() */
+#define LEON_BYPASSCACHE_LOAD_VA(x) leon_readnobuffer_reg((unsigned long)(x))
+
+extern void sparc_leon_eirq_register(int eirq);
+extern void leon_init(void);
+extern void leon_switch_mm(void);
+extern void leon_init_IRQ(void);
+
+extern unsigned long last_valid_pfn;
+
+extern inline unsigned long sparc_leon3_get_dcachecfg(void)
+{
+	unsigned int retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r"(retval) :
+			     "r"(ASI_LEON3_SYSCTRL_DCFG),
+			     "i"(ASI_LEON3_SYSCTRL));
+	return retval;
+}
+
+/* enable snooping */
+extern inline void sparc_leon3_enable_snooping(void)
+{
+	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
+			  "set 0x800000, %%l2\n\t"
+			  "or  %%l2, %%l1, %%l2\n\t"
+			  "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
+};
+
+extern inline void sparc_leon3_disable_cache(void)
+{
+	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
+			  "set 0x00000f, %%l2\n\t"
+			  "andn  %%l2, %%l1, %%l2\n\t"
+			  "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
+};
+
+#endif /*!__ASSEMBLY__*/
+
+#ifdef CONFIG_SMP
+# define LEON3_IRQ_RESCHEDULE		13
+# define LEON3_IRQ_TICKER		(leon_percpu_timer_dev[0].irq)
+# define LEON3_IRQ_CROSS_CALL		15
+#endif
+
+#if defined(PAGE_SIZE_LEON_8K)
+#define LEON_PAGE_SIZE_LEON 1
+#elif defined(PAGE_SIZE_LEON_16K)
+#define LEON_PAGE_SIZE_LEON 2)
+#else
+#define LEON_PAGE_SIZE_LEON 0
+#endif
+
+#if LEON_PAGE_SIZE_LEON == 0
+/* [ 8, 6, 6 ] + 12 */
+#define LEON_PGD_SH    24
+#define LEON_PGD_M     0xff
+#define LEON_PMD_SH    18
+#define LEON_PMD_SH_V  (LEON_PGD_SH-2)
+#define LEON_PMD_M     0x3f
+#define LEON_PTE_SH    12
+#define LEON_PTE_M     0x3f
+#elif LEON_PAGE_SIZE_LEON == 1
+/* [ 7, 6, 6 ] + 13 */
+#define LEON_PGD_SH    25
+#define LEON_PGD_M     0x7f
+#define LEON_PMD_SH    19
+#define LEON_PMD_SH_V  (LEON_PGD_SH-1)
+#define LEON_PMD_M     0x3f
+#define LEON_PTE_SH    13
+#define LEON_PTE_M     0x3f
+#elif LEON_PAGE_SIZE_LEON == 2
+/* [ 6, 6, 6 ] + 14 */
+#define LEON_PGD_SH    26
+#define LEON_PGD_M     0x3f
+#define LEON_PMD_SH    20
+#define LEON_PMD_SH_V  (LEON_PGD_SH-0)
+#define LEON_PMD_M     0x3f
+#define LEON_PTE_SH    14
+#define LEON_PTE_M     0x3f
+#elif LEON_PAGE_SIZE_LEON == 3
+/* [ 4, 7, 6 ] + 15 */
+#define LEON_PGD_SH    28
+#define LEON_PGD_M     0x0f
+#define LEON_PMD_SH    21
+#define LEON_PMD_SH_V  (LEON_PGD_SH-0)
+#define LEON_PMD_M     0x7f
+#define LEON_PTE_SH    15
+#define LEON_PTE_M     0x3f
+#else
+#error cannot determine LEON_PAGE_SIZE_LEON
+#endif
+
+#define PAGE_MIN_SHIFT   (12)
+#define PAGE_MIN_SIZE    (1UL << PAGE_MIN_SHIFT)
+
+#define LEON3_XCCR_SETS_MASK  0x07000000UL
+#define LEON3_XCCR_SSIZE_MASK 0x00f00000UL
+
+#define LEON2_CCR_DSETS_MASK 0x03000000UL
+#define LEON2_CFG_SSIZE_MASK 0x00007000UL
+
+#ifndef __ASSEMBLY__
+extern unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr);
+extern void leon_flush_icache_all(void);
+extern void leon_flush_dcache_all(void);
+extern void leon_flush_cache_all(void);
+extern void leon_flush_tlb_all(void);
+extern int leon_flush_during_switch;
+extern int leon_flush_needed(void);
+
+struct vm_area_struct;
+extern void leon_flush_icache_all(void);
+extern void leon_flush_dcache_all(void);
+extern void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page);
+extern void leon_flush_cache_all(void);
+extern void leon_flush_tlb_all(void);
+extern int leon_flush_during_switch;
+extern int leon_flush_needed(void);
+extern void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page);
+
+/* struct that hold LEON3 cache configuration registers */
+struct leon3_cacheregs {
+	unsigned long ccr;	/* 0x00 - Cache Control Register  */
+	unsigned long iccr;     /* 0x08 - Instruction Cache Configuration Register */
+	unsigned long dccr;	/* 0x0c - Data Cache Configuration Register */
+};
+
+/* struct that hold LEON2 cache configuration register
+ * & configuration register
+ */
+struct leon2_cacheregs {
+	unsigned long ccr, cfg;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+
+struct device_node;
+extern int sparc_leon_eirq_get(int eirq, int cpu);
+extern irqreturn_t sparc_leon_eirq_isr(int dummy, void *dev_id);
+extern void sparc_leon_eirq_register(int eirq);
+extern void leon_clear_clock_irq(void);
+extern void leon_load_profile_irq(int cpu, unsigned int limit);
+extern void leon_init_timers(irq_handler_t counter_fn);
+extern void leon_clear_clock_irq(void);
+extern void leon_load_profile_irq(int cpu, unsigned int limit);
+extern void leon_trans_init(struct device_node *dp);
+extern void leon_node_init(struct device_node *dp, struct device_node ***nextp);
+extern void leon_init_IRQ(void);
+extern void leon_init(void);
+extern unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr);
+extern void init_leon(void);
+extern void poke_leonsparc(void);
+extern void leon3_getCacheRegs(struct leon3_cacheregs *regs);
+extern int leon_flush_needed(void);
+extern void leon_switch_mm(void);
+extern int srmmu_swprobe_trace;
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+/* macros used in leon_mm.c */
+#define PFN(x)           ((x) >> PAGE_SHIFT)
+#define _pfn_valid(pfn)	 ((pfn < last_valid_pfn) && (pfn >= PFN(phys_base)))
+#define _SRMMU_PTE_PMASK_LEON 0xffffffff
+
+#else /* defined(CONFIG_SPARC_LEON) */
+
+/* nop definitions for !LEON case */
+#define leon_init() do {} while (0)
+#define leon_switch_mm() do {} while (0)
+#define leon_init_IRQ() do {} while (0)
+#define init_leon() do {} while (0)
+
+#endif /* !defined(CONFIG_SPARC_LEON) */
+
+#endif
diff --git a/arch/sparc/include/asm/leon_amba.h b/arch/sparc/include/asm/leon_amba.h
new file mode 100644
index 00000000000..618e8882179
--- /dev/null
+++ b/arch/sparc/include/asm/leon_amba.h
@@ -0,0 +1,263 @@
+/*
+*Copyright (C) 2004 Konrad Eisele (eiselekd@web.de,konrad@gaisler.com), Gaisler Research
+*Copyright (C) 2004 Stefan Holst (mail@s-holst.de), Uni-Stuttgart
+*Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com),Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+*/
+
+#ifndef LEON_AMBA_H_INCLUDE
+#define LEON_AMBA_H_INCLUDE
+
+#ifndef __ASSEMBLY__
+
+struct amba_prom_registers {
+	unsigned int phys_addr;	/* The physical address of this register */
+	unsigned int reg_size;	/* How many bytes does this register take up? */
+};
+
+#endif
+
+/*
+ *  The following defines the bits in the LEON UART Status Registers.
+ */
+
+#define LEON_REG_UART_STATUS_DR   0x00000001	/* Data Ready */
+#define LEON_REG_UART_STATUS_TSE  0x00000002	/* TX Send Register Empty */
+#define LEON_REG_UART_STATUS_THE  0x00000004	/* TX Hold Register Empty */
+#define LEON_REG_UART_STATUS_BR   0x00000008	/* Break Error */
+#define LEON_REG_UART_STATUS_OE   0x00000010	/* RX Overrun Error */
+#define LEON_REG_UART_STATUS_PE   0x00000020	/* RX Parity Error */
+#define LEON_REG_UART_STATUS_FE   0x00000040	/* RX Framing Error */
+#define LEON_REG_UART_STATUS_ERR  0x00000078	/* Error Mask */
+
+/*
+ *  The following defines the bits in the LEON UART Ctrl Registers.
+ */
+
+#define LEON_REG_UART_CTRL_RE     0x00000001	/* Receiver enable */
+#define LEON_REG_UART_CTRL_TE     0x00000002	/* Transmitter enable */
+#define LEON_REG_UART_CTRL_RI     0x00000004	/* Receiver interrupt enable */
+#define LEON_REG_UART_CTRL_TI     0x00000008	/* Transmitter irq */
+#define LEON_REG_UART_CTRL_PS     0x00000010	/* Parity select */
+#define LEON_REG_UART_CTRL_PE     0x00000020	/* Parity enable */
+#define LEON_REG_UART_CTRL_FL     0x00000040	/* Flow control enable */
+#define LEON_REG_UART_CTRL_LB     0x00000080	/* Loop Back enable */
+
+#define LEON3_GPTIMER_EN 1
+#define LEON3_GPTIMER_RL 2
+#define LEON3_GPTIMER_LD 4
+#define LEON3_GPTIMER_IRQEN 8
+#define LEON3_GPTIMER_SEPIRQ 8
+
+#define LEON23_REG_TIMER_CONTROL_EN    0x00000001 /* 1 = enable counting */
+/* 0 = hold scalar and counter */
+#define LEON23_REG_TIMER_CONTROL_RL    0x00000002 /* 1 = reload at 0 */
+						  /* 0 = stop at 0 */
+#define LEON23_REG_TIMER_CONTROL_LD    0x00000004 /* 1 = load counter */
+						  /* 0 = no function */
+#define LEON23_REG_TIMER_CONTROL_IQ    0x00000008 /* 1 = irq enable */
+						  /* 0 = no function */
+
+/*
+ *  The following defines the bits in the LEON PS/2 Status Registers.
+ */
+
+#define LEON_REG_PS2_STATUS_DR   0x00000001	/* Data Ready */
+#define LEON_REG_PS2_STATUS_PE   0x00000002	/* Parity error */
+#define LEON_REG_PS2_STATUS_FE   0x00000004	/* Framing error */
+#define LEON_REG_PS2_STATUS_KI   0x00000008	/* Keyboard inhibit */
+#define LEON_REG_PS2_STATUS_RF   0x00000010	/* RX buffer full */
+#define LEON_REG_PS2_STATUS_TF   0x00000020	/* TX buffer full */
+
+/*
+ *  The following defines the bits in the LEON PS/2 Ctrl Registers.
+ */
+
+#define LEON_REG_PS2_CTRL_RE 0x00000001	/* Receiver enable */
+#define LEON_REG_PS2_CTRL_TE 0x00000002	/* Transmitter enable */
+#define LEON_REG_PS2_CTRL_RI 0x00000004	/* Keyboard receive irq  */
+#define LEON_REG_PS2_CTRL_TI 0x00000008	/* Keyboard transmit irq */
+
+#define LEON3_IRQMPSTATUS_CPUNR     28
+#define LEON3_IRQMPSTATUS_BROADCAST 27
+
+#define GPTIMER_CONFIG_IRQNT(a)          (((a) >> 3) & 0x1f)
+#define GPTIMER_CONFIG_ISSEP(a)          ((a) & (1 << 8))
+#define GPTIMER_CONFIG_NTIMERS(a)        ((a) & (0x7))
+#define LEON3_GPTIMER_CTRL_PENDING       0x10
+#define LEON3_GPTIMER_CONFIG_NRTIMERS(c) ((c)->config & 0x7)
+#define LEON3_GPTIMER_CTRL_ISPENDING(r)  (((r)&LEON3_GPTIMER_CTRL_PENDING) ? 1 : 0)
+
+#ifdef CONFIG_SPARC_LEON
+
+#ifndef __ASSEMBLY__
+
+struct leon3_irqctrl_regs_map {
+	u32 ilevel;
+	u32 ipend;
+	u32 iforce;
+	u32 iclear;
+	u32 mpstatus;
+	u32 mpbroadcast;
+	u32 notused02;
+	u32 notused03;
+	u32 notused10;
+	u32 notused11;
+	u32 notused12;
+	u32 notused13;
+	u32 notused20;
+	u32 notused21;
+	u32 notused22;
+	u32 notused23;
+	u32 mask[16];
+	u32 force[16];
+	/* Extended IRQ registers */
+	u32 intid[16];	/* 0xc0 */
+};
+
+struct leon3_apbuart_regs_map {
+	u32 data;
+	u32 status;
+	u32 ctrl;
+	u32 scaler;
+};
+
+struct leon3_gptimerelem_regs_map {
+	u32 val;
+	u32 rld;
+	u32 ctrl;
+	u32 unused;
+};
+
+struct leon3_gptimer_regs_map {
+	u32 scalar;
+	u32 scalar_reload;
+	u32 config;
+	u32 unused;
+	struct leon3_gptimerelem_regs_map e[8];
+};
+
+/*
+ *  Types and structure used for AMBA Plug & Play bus scanning
+ */
+
+#define AMBA_MAXAPB_DEVS 64
+#define AMBA_MAXAPB_DEVS_PERBUS 16
+
+struct amba_device_table {
+	int devnr;		   /* number of devices on AHB or APB bus */
+	unsigned int *addr[16];    /* addresses to the devices configuration tables */
+	unsigned int allocbits[1]; /* 0=unallocated, 1=allocated driver */
+};
+
+struct amba_apbslv_device_table {
+	int devnr;		                  /* number of devices on AHB or APB bus */
+	unsigned int *addr[AMBA_MAXAPB_DEVS];     /* addresses to the devices configuration tables */
+	unsigned int apbmst[AMBA_MAXAPB_DEVS];    /* apb master if a entry is a apb slave */
+	unsigned int apbmstidx[AMBA_MAXAPB_DEVS]; /* apb master idx if a entry is a apb slave */
+	unsigned int allocbits[4];                /* 0=unallocated, 1=allocated driver */
+};
+
+struct amba_confarea_type {
+	struct amba_confarea_type *next;/* next bus in chain */
+	struct amba_device_table ahbmst;
+	struct amba_device_table ahbslv;
+	struct amba_apbslv_device_table apbslv;
+	unsigned int apbmst;
+};
+
+/* collect apb slaves */
+struct amba_apb_device {
+	unsigned int start, irq, bus_id;
+	struct amba_confarea_type *bus;
+};
+
+/* collect ahb slaves */
+struct amba_ahb_device {
+	unsigned int start[4], irq, bus_id;
+	struct amba_confarea_type *bus;
+};
+
+struct device_node;
+void _amba_init(struct device_node *dp, struct device_node ***nextp);
+
+extern struct leon3_irqctrl_regs_map *leon3_irqctrl_regs;
+extern struct leon3_gptimer_regs_map *leon3_gptimer_regs;
+extern struct amba_apb_device leon_percpu_timer_dev[16];
+extern int leondebug_irq_disable;
+extern int leon_debug_irqout;
+extern unsigned long leon3_gptimer_irq;
+extern unsigned int sparc_leon_eirq;
+
+#endif /* __ASSEMBLY__ */
+
+#define LEON3_IO_AREA 0xfff00000
+#define LEON3_CONF_AREA 0xff000
+#define LEON3_AHB_SLAVE_CONF_AREA (1 << 11)
+
+#define LEON3_AHB_CONF_WORDS 8
+#define LEON3_APB_CONF_WORDS 2
+#define LEON3_AHB_MASTERS 16
+#define LEON3_AHB_SLAVES 16
+#define LEON3_APB_SLAVES 16
+#define LEON3_APBUARTS 8
+
+/* Vendor codes */
+#define VENDOR_GAISLER   1
+#define VENDOR_PENDER    2
+#define VENDOR_ESA       4
+#define VENDOR_OPENCORES 8
+
+/* Gaisler Research device id's */
+#define GAISLER_LEON3    0x003
+#define GAISLER_LEON3DSU 0x004
+#define GAISLER_ETHAHB   0x005
+#define GAISLER_APBMST   0x006
+#define GAISLER_AHBUART  0x007
+#define GAISLER_SRCTRL   0x008
+#define GAISLER_SDCTRL   0x009
+#define GAISLER_APBUART  0x00C
+#define GAISLER_IRQMP    0x00D
+#define GAISLER_AHBRAM   0x00E
+#define GAISLER_GPTIMER  0x011
+#define GAISLER_PCITRG   0x012
+#define GAISLER_PCISBRG  0x013
+#define GAISLER_PCIFBRG  0x014
+#define GAISLER_PCITRACE 0x015
+#define GAISLER_PCIDMA   0x016
+#define GAISLER_AHBTRACE 0x017
+#define GAISLER_ETHDSU   0x018
+#define GAISLER_PIOPORT  0x01A
+#define GAISLER_GRGPIO   0x01A
+#define GAISLER_AHBJTAG  0x01c
+#define GAISLER_ETHMAC   0x01D
+#define GAISLER_AHB2AHB  0x020
+#define GAISLER_USBDC    0x021
+#define GAISLER_ATACTRL  0x024
+#define GAISLER_DDRSPA   0x025
+#define GAISLER_USBEHC   0x026
+#define GAISLER_USBUHC   0x027
+#define GAISLER_I2CMST   0x028
+#define GAISLER_SPICTRL  0x02D
+#define GAISLER_DDR2SPA  0x02E
+#define GAISLER_SPIMCTRL 0x045
+#define GAISLER_LEON4    0x048
+#define GAISLER_LEON4DSU 0x049
+#define GAISLER_AHBSTAT  0x052
+#define GAISLER_FTMCTRL  0x054
+#define GAISLER_KBD      0x060
+#define GAISLER_VGA      0x061
+#define GAISLER_SVGA     0x063
+#define GAISLER_GRSYSMON 0x066
+#define GAISLER_GRACECTRL 0x067
+
+#define GAISLER_L2TIME   0xffd	/* internal device: leon2 timer */
+#define GAISLER_L2C      0xffe	/* internal device: leon2compat */
+#define GAISLER_PLUGPLAY 0xfff	/* internal device: plug & play configarea */
+
+#define amba_vendor(x) (((x) >> 24) & 0xff)
+
+#define amba_device(x) (((x) >> 12) & 0xfff)
+
+#endif /* !defined(CONFIG_SPARC_LEON) */
+
+#endif
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
new file mode 100644
index 00000000000..54d8a5bd482
--- /dev/null
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/of_device.h>
+#include <asm/oplib.h>
+#include <asm/timer.h>
+#include <asm/prom.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
+
+#include "prom.h"
+#include "irq.h"
+
+struct leon3_irqctrl_regs_map *leon3_irqctrl_regs; /* interrupt controller base address, initialized by amba_init() */
+struct leon3_gptimer_regs_map *leon3_gptimer_regs; /* timer controller base address, initialized by amba_init() */
+struct amba_apb_device leon_percpu_timer_dev[16];
+
+int leondebug_irq_disable;
+int leon_debug_irqout;
+static int dummy_master_l10_counter;
+
+unsigned long leon3_gptimer_irq; /* interrupt controller irq number, initialized by amba_init() */
+unsigned int sparc_leon_eirq;
+#define LEON_IMASK ((&leon3_irqctrl_regs->mask[0]))
+
+/* Return the IRQ of the pending IRQ on the extended IRQ controller */
+int sparc_leon_eirq_get(int eirq, int cpu)
+{
+	return LEON3_BYPASS_LOAD_PA(&leon3_irqctrl_regs->intid[cpu]) & 0x1f;
+}
+
+irqreturn_t sparc_leon_eirq_isr(int dummy, void *dev_id)
+{
+	printk(KERN_ERR "sparc_leon_eirq_isr: ERROR EXTENDED IRQ\n");
+	return IRQ_HANDLED;
+}
+
+/* The extended IRQ controller has been found, this function registers it */
+void sparc_leon_eirq_register(int eirq)
+{
+	int irq;
+
+	/* Register a "BAD" handler for this interrupt, it should never happen */
+	irq = request_irq(eirq, sparc_leon_eirq_isr,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC), "extirq", NULL);
+
+	if (irq) {
+		printk(KERN_ERR
+		       "sparc_leon_eirq_register: unable to attach IRQ%d\n",
+		       eirq);
+	} else {
+		sparc_leon_eirq = eirq;
+	}
+
+}
+
+static inline unsigned long get_irqmask(unsigned int irq)
+{
+	unsigned long mask;
+
+	if (!irq || ((irq > 0xf) && !sparc_leon_eirq)
+	    || ((irq > 0x1f) && sparc_leon_eirq)) {
+		printk(KERN_ERR
+		       "leon_get_irqmask: false irq number: %d\n", irq);
+		mask = 0;
+	} else {
+		mask = LEON_HARD_INT(irq);
+	}
+	return mask;
+}
+
+static void leon_enable_irq(unsigned int irq_nr)
+{
+	unsigned long mask, flags;
+	mask = get_irqmask(irq_nr);
+	local_irq_save(flags);
+	LEON3_BYPASS_STORE_PA(LEON_IMASK,
+			      (LEON3_BYPASS_LOAD_PA(LEON_IMASK) | (mask)));
+	local_irq_restore(flags);
+}
+
+static void leon_disable_irq(unsigned int irq_nr)
+{
+	unsigned long mask, flags;
+	mask = get_irqmask(irq_nr);
+	local_irq_save(flags);
+	LEON3_BYPASS_STORE_PA(LEON_IMASK,
+			      (LEON3_BYPASS_LOAD_PA(LEON_IMASK) & ~(mask)));
+	local_irq_restore(flags);
+
+}
+
+void __init leon_init_timers(irq_handler_t counter_fn)
+{
+	int irq;
+
+	leondebug_irq_disable = 0;
+	leon_debug_irqout = 0;
+	master_l10_counter = (unsigned int *)&dummy_master_l10_counter;
+	dummy_master_l10_counter = 0;
+
+	if (leon3_gptimer_regs && leon3_irqctrl_regs) {
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
+				      (((1000000 / 100) - 1)));
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
+
+	} else {
+		printk(KERN_ERR "No Timer/irqctrl found\n");
+		BUG();
+	}
+
+	irq = request_irq(leon3_gptimer_irq,
+			  counter_fn,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
+
+	if (irq) {
+		printk(KERN_ERR "leon_time_init: unable to attach IRQ%d\n",
+		       LEON_INTERRUPT_TIMER1);
+		prom_halt();
+	}
+
+	if (leon3_gptimer_regs) {
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl,
+				      LEON3_GPTIMER_EN |
+				      LEON3_GPTIMER_RL |
+				      LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+	}
+}
+
+void leon_clear_clock_irq(void)
+{
+}
+
+void leon_load_profile_irq(int cpu, unsigned int limit)
+{
+	BUG();
+}
+
+
+
+
+void __init leon_trans_init(struct device_node *dp)
+{
+	if (strcmp(dp->type, "cpu") == 0 && strcmp(dp->name, "<NULL>") == 0) {
+		struct property *p;
+		p = of_find_property(dp, "mid", (void *)0);
+		if (p) {
+			int mid;
+			dp->name = prom_early_alloc(5 + 1);
+			memcpy(&mid, p->value, p->length);
+			sprintf((char *)dp->name, "cpu%.2d", mid);
+		}
+	}
+}
+
+void __initdata (*prom_amba_init)(struct device_node *dp, struct device_node ***nextp) = 0;
+
+void __init leon_node_init(struct device_node *dp, struct device_node ***nextp)
+{
+	if (prom_amba_init &&
+	    strcmp(dp->type, "ambapp") == 0 &&
+	    strcmp(dp->name, "ambapp0") == 0) {
+		prom_amba_init(dp, nextp);
+	}
+}
+
+void __init leon_init_IRQ(void)
+{
+	sparc_init_timers = leon_init_timers;
+
+	BTFIXUPSET_CALL(enable_irq, leon_enable_irq, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(disable_irq, leon_disable_irq, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(enable_pil_irq, leon_enable_irq, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(disable_pil_irq, leon_disable_irq, BTFIXUPCALL_NORM);
+
+	BTFIXUPSET_CALL(clear_clock_irq, leon_clear_clock_irq,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(load_profile_irq, leon_load_profile_irq,
+			BTFIXUPCALL_NOP);
+
+#ifdef CONFIG_SMP
+	BTFIXUPSET_CALL(set_cpu_int, leon_set_cpu_int, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(clear_cpu_int, leon_clear_ipi, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(set_irq_udt, leon_set_udt, BTFIXUPCALL_NORM);
+#endif
+
+}
+
+void __init leon_init(void)
+{
+	prom_build_more = &leon_node_init;
+}
diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c
new file mode 100644
index 00000000000..c0e01297e64
--- /dev/null
+++ b/arch/sparc/mm/leon_mm.c
@@ -0,0 +1,260 @@
+/*
+ *  linux/arch/sparc/mm/leon_m.c
+ *
+ * Copyright (C) 2004 Konrad Eisele (eiselekd@web.de, konrad@gaisler.com) Gaisler Research
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ *
+ * do srmmu probe in software
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+#include <asm/tlbflush.h>
+
+int leon_flush_during_switch = 1;
+int srmmu_swprobe_trace;
+
+unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr)
+{
+
+	unsigned int ctxtbl;
+	unsigned int pgd, pmd, ped;
+	unsigned int ptr;
+	unsigned int lvl, pte, paddrbase;
+	unsigned int ctx;
+	unsigned int paddr_calc;
+
+	paddrbase = 0;
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe: trace on\n");
+
+	ctxtbl = srmmu_get_ctable_ptr();
+	if (!(ctxtbl)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: srmmu_get_ctable_ptr returned 0=>0\n");
+		return 0;
+	}
+	if (!_pfn_valid(PFN(ctxtbl))) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO
+			       "swprobe: !_pfn_valid(%x)=>0\n",
+			       PFN(ctxtbl));
+		return 0;
+	}
+
+	ctx = srmmu_get_context();
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- ctx (%x) ---\n", ctx);
+
+	pgd = LEON_BYPASS_LOAD_PA(ctxtbl + (ctx * 4));
+
+	if (((pgd & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pgd is entry level 3\n");
+		lvl = 3;
+		pte = pgd;
+		paddrbase = pgd & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (((pgd & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pgd is invalid => 0\n");
+		return 0;
+	}
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- pgd (%x) ---\n", pgd);
+
+	ptr = (pgd & SRMMU_PTD_PMASK) << 4;
+	ptr += ((((vaddr) >> LEON_PGD_SH) & LEON_PGD_M) * 4);
+	if (!_pfn_valid(PFN(ptr)))
+		return 0;
+
+	pmd = LEON_BYPASS_LOAD_PA(ptr);
+	if (((pmd & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pmd is entry level 2\n");
+		lvl = 2;
+		pte = pmd;
+		paddrbase = pmd & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (((pmd & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pmd is invalid => 0\n");
+		return 0;
+	}
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- pmd (%x) ---\n", pmd);
+
+	ptr = (pmd & SRMMU_PTD_PMASK) << 4;
+	ptr += (((vaddr >> LEON_PMD_SH) & LEON_PMD_M) * 4);
+	if (!_pfn_valid(PFN(ptr))) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: !_pfn_valid(%x)=>0\n",
+			       PFN(ptr));
+		return 0;
+	}
+
+	ped = LEON_BYPASS_LOAD_PA(ptr);
+
+	if (((ped & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: ped is entry level 1\n");
+		lvl = 1;
+		pte = ped;
+		paddrbase = ped & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (((ped & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: ped is invalid => 0\n");
+		return 0;
+	}
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- ped (%x) ---\n", ped);
+
+	ptr = (ped & SRMMU_PTD_PMASK) << 4;
+	ptr += (((vaddr >> LEON_PTE_SH) & LEON_PTE_M) * 4);
+	if (!_pfn_valid(PFN(ptr)))
+		return 0;
+
+	ptr = LEON_BYPASS_LOAD_PA(ptr);
+	if (((ptr & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: ptr is entry level 0\n");
+		lvl = 0;
+		pte = ptr;
+		paddrbase = ptr & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe: ptr is invalid => 0\n");
+	return 0;
+
+ready:
+	switch (lvl) {
+	case 0:
+		paddr_calc =
+		    (vaddr & ~(-1 << LEON_PTE_SH)) | ((pte & ~0xff) << 4);
+		break;
+	case 1:
+		paddr_calc =
+		    (vaddr & ~(-1 << LEON_PMD_SH)) | ((pte & ~0xff) << 4);
+		break;
+	case 2:
+		paddr_calc =
+		    (vaddr & ~(-1 << LEON_PGD_SH)) | ((pte & ~0xff) << 4);
+		break;
+	default:
+	case 3:
+		paddr_calc = vaddr;
+		break;
+	}
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe: padde %x\n", paddr_calc);
+	if (paddr)
+		*paddr = paddr_calc;
+	return paddrbase;
+}
+
+void leon_flush_icache_all(void)
+{
+	__asm__ __volatile__(" flush ");	/*iflush*/
+}
+
+void leon_flush_dcache_all(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i"(ASI_LEON_DFLUSH) : "memory");
+}
+
+void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page)
+{
+	if (vma->vm_flags & VM_EXEC)
+		leon_flush_icache_all();
+	leon_flush_dcache_all();
+}
+
+void leon_flush_cache_all(void)
+{
+	__asm__ __volatile__(" flush ");	/*iflush*/
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i"(ASI_LEON_DFLUSH) : "memory");
+}
+
+void leon_flush_tlb_all(void)
+{
+	leon_flush_cache_all();
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r"(0x400),
+			     "i"(ASI_LEON_MMUFLUSH) : "memory");
+}
+
+/* get all cache regs */
+void leon3_getCacheRegs(struct leon3_cacheregs *regs)
+{
+	unsigned long ccr, iccr, dccr;
+
+	if (!regs)
+		return;
+	/* Get Cache regs from "Cache ASI" address 0x0, 0x8 and 0xC */
+	__asm__ __volatile__("lda [%%g0] %3, %0\n\t"
+			     "mov 0x08, %%g1\n\t"
+			     "lda [%%g1] %3, %1\n\t"
+			     "mov 0x0c, %%g1\n\t"
+			     "lda [%%g1] %3, %2\n\t"
+			     : "=r"(ccr), "=r"(iccr), "=r"(dccr)
+			       /* output */
+			     : "i"(ASI_LEON_CACHEREGS)	/* input */
+			     : "g1"	/* clobber list */
+	    );
+	regs->ccr = ccr;
+	regs->iccr = iccr;
+	regs->dccr = dccr;
+}
+
+/* Due to virtual cache we need to check cache configuration if
+ * it is possible to skip flushing in some cases.
+ *
+ * Leon2 and Leon3 differ in their way of telling cache information
+ *
+ */
+int leon_flush_needed(void)
+{
+	int flush_needed = -1;
+	unsigned int ssize, sets;
+	char *setStr[4] =
+	    { "direct mapped", "2-way associative", "3-way associative",
+		"4-way associative"
+	};
+	/* leon 3 */
+	struct leon3_cacheregs cregs;
+	leon3_getCacheRegs(&cregs);
+	sets = (cregs.dccr & LEON3_XCCR_SETS_MASK) >> 24;
+	/* (ssize=>realsize) 0=>1k, 1=>2k, 2=>4k, 3=>8k ... */
+	ssize = 1 << ((cregs.dccr & LEON3_XCCR_SSIZE_MASK) >> 20);
+
+	printk(KERN_INFO "CACHE: %s cache, set size %dk\n",
+	       sets > 3 ? "unknown" : setStr[sets], ssize);
+	if ((ssize <= (PAGE_SIZE / 1024)) && (sets == 0)) {
+		/* Set Size <= Page size  ==>
+		   flush on every context switch not needed. */
+		flush_needed = 0;
+		printk(KERN_INFO "CACHE: not flushing on every context switch\n");
+	}
+	return flush_needed;
+}
+
+void leon_switch_mm(void)
+{
+	flush_tlb_mm((void *)0);
+	if (leon_flush_during_switch)
+		leon_flush_cache_all();
+}
-- 
cgit v1.2.3


From 97fb58fa9bb509b49090a1c62ed1b660d518c66b Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:30 +0000
Subject: sparc,leon: Redefine MMU register access asi if CONFIG_LEON

SPARC-LEON has a different ASI for mmu register accesses.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/asi.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
index 74703c5ef98..b2e3db63a64 100644
--- a/arch/sparc/include/asm/asi.h
+++ b/arch/sparc/include/asm/asi.h
@@ -40,7 +40,11 @@
 #define ASI_M_UNA01         0x01   /* Same here... */
 #define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
 #define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
+#ifndef CONFIG_SPARC_LEON
 #define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
+#else
+#define ASI_M_MMUREGS       0x19
+#endif /* CONFIG_SPARC_LEON */
 #define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
 #define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
 #define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
-- 
cgit v1.2.3


From 0fd7ef1fe0e6e70c7851ce65a2eb8a8d3f49147e Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:31 +0000
Subject: sparc,leon: Introduce the sparc-leon CPU type.

Add sparc_leon enum, M_LEON|M_LEON3_SOC machine. Add compilation of
leon.c in mm and kernel
if CONFIG_SPARC_LEON is defined. Add sparc_leon dependent
initialization to switch statements + head.S.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/machines.h  | 6 +++++-
 arch/sparc/include/asm/pgtsrmmu.h  | 4 ++++
 arch/sparc/include/asm/prom.h      | 3 +++
 arch/sparc/include/asm/system_32.h | 1 +
 arch/sparc/kernel/Makefile         | 2 ++
 arch/sparc/kernel/cpu.c            | 5 +++++
 arch/sparc/kernel/head_32.S        | 5 +++++
 arch/sparc/kernel/idprom.c         | 2 ++
 arch/sparc/kernel/irq_32.c         | 5 +++++
 arch/sparc/kernel/setup_32.c       | 5 +++++
 arch/sparc/mm/Makefile             | 1 +
 arch/sparc/mm/init_32.c            | 4 ++++
 arch/sparc/mm/loadmmu.c            | 1 +
 13 files changed, 43 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
index c28c2f24879..cd9c099567e 100644
--- a/arch/sparc/include/asm/machines.h
+++ b/arch/sparc/include/asm/machines.h
@@ -15,7 +15,7 @@ struct Sun_Machine_Models {
 /* Current number of machines we know about that has an IDPROM
  * machtype entry including one entry for the 0x80 OBP machines.
  */
-#define NUM_SUN_MACHINES   15
+#define NUM_SUN_MACHINES   16
 
 /* The machine type in the idprom area looks like this:
  *
@@ -30,6 +30,7 @@ struct Sun_Machine_Models {
 
 #define SM_ARCH_MASK  0xf0
 #define SM_SUN4       0x20
+#define  M_LEON       0x30
 #define SM_SUN4C      0x50
 #define SM_SUN4M      0x70
 #define SM_SUN4M_OBP  0x80
@@ -41,6 +42,9 @@ struct Sun_Machine_Models {
 #define SM_4_330      0x03    /* Sun 4/300 series */
 #define SM_4_470      0x04    /* Sun 4/400 series */
 
+/* Leon machines */
+#define M_LEON3_SOC   0x02    /* Leon3 SoC */
+
 /* Sun4c machines                Full Name              - PROM NAME */
 #define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
 #define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
index 808555fc1d5..1407c07bdad 100644
--- a/arch/sparc/include/asm/pgtsrmmu.h
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -267,6 +267,7 @@ static inline void srmmu_flush_tlb_page(unsigned long page)
 
 }
 
+#ifndef CONFIG_SPARC_LEON
 static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
 {
 	unsigned long retval;
@@ -278,6 +279,9 @@ static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
 
 	return retval;
 }
+#else
+#define srmmu_hwprobe(addr) (srmmu_swprobe(addr, 0) & SRMMU_PTE_PMASK)
+#endif
 
 static inline int
 srmmu_get_pte (unsigned long addr)
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index be8d7aaeb60..82a190d7efc 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -118,5 +118,8 @@ extern struct device_node *of_console_device;
 extern char *of_console_path;
 extern char *of_console_options;
 
+extern void (*prom_build_more)(struct device_node *dp, struct device_node ***nextp);
+extern char *build_full_name(struct device_node *dp);
+
 #endif /* __KERNEL__ */
 #endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
index 751c8c17f5a..890036b3689 100644
--- a/arch/sparc/include/asm/system_32.h
+++ b/arch/sparc/include/asm/system_32.h
@@ -32,6 +32,7 @@ enum sparc_cpu {
   sun4u       = 0x05, /* V8 ploos ploos */
   sun_unknown = 0x06,
   ap1000      = 0x07, /* almost a sun4m */
+  sparc_leon  = 0x08, /* Leon SoC */
 };
 
 /* Really, userland should not be looking at any of this... */
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 475ce4696ac..b0041756c9f 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -41,6 +41,8 @@ obj-y                   += of_device_common.o
 obj-y                   += of_device_$(BITS).o
 obj-$(CONFIG_SPARC64)   += prom_irqtrans.o
 
+obj-$(CONFIG_SPARC_LEON)+= leon_kernel.o
+
 obj-$(CONFIG_SPARC64)   += reboot.o
 obj-$(CONFIG_SPARC64)   += sysfs.o
 obj-$(CONFIG_SPARC64)   += iommu.o
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index d85c3dc4953..1446df90ef8 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -312,7 +312,12 @@ void __cpuinit cpu_probe(void)
 
 	psr = get_psr();
 	put_psr(psr | PSR_EF);
+#ifdef CONFIG_SPARC_LEON
+	fpu_vers = 7;
+#else
 	fpu_vers = ((get_fsr() >> 17) & 0x7);
+#endif
+
 	put_psr(psr);
 
 	set_cpu_and_fpu(psr_impl, psr_vers, fpu_vers);
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 6b4d8acc4c8..439d82a95ac 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -809,6 +809,11 @@ found_version:
 		 nop
 
 got_prop:
+#ifdef CONFIG_SPARC_LEON
+	        /* no cpu-type check is needed, it is a SPARC-LEON */
+		ba sun4c_continue_boot
+		 nop
+#endif
 		set	cputypval, %o2
 		ldub	[%o2 + 0x4], %l1
 
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 57922f69c3f..52a15fe2db1 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -31,6 +31,8 @@ static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 { .name = "Sun 4/200 Series",        .id_machtype = (SM_SUN4 | SM_4_260) },
 { .name = "Sun 4/300 Series",        .id_machtype = (SM_SUN4 | SM_4_330) },
 { .name = "Sun 4/400 Series",        .id_machtype = (SM_SUN4 | SM_4_470) },
+/* Now Leon */
+{ .name = "Leon3 System-on-a-Chip",  .id_machtype = (M_LEON | M_LEON3_SOC) },
 /* Now, Sun4c's */
 { .name = "Sun4c SparcStation 1",    .id_machtype = (SM_SUN4C | SM_4C_SS1) },
 { .name = "Sun4c SparcStation IPC",  .id_machtype = (SM_SUN4C | SM_4C_IPC) },
diff --git a/arch/sparc/kernel/irq_32.c b/arch/sparc/kernel/irq_32.c
index ad800b80c71..e1af4372832 100644
--- a/arch/sparc/kernel/irq_32.c
+++ b/arch/sparc/kernel/irq_32.c
@@ -45,6 +45,7 @@
 #include <asm/pcic.h>
 #include <asm/cacheflush.h>
 #include <asm/irq_regs.h>
+#include <asm/leon.h>
 
 #include "kernel.h"
 #include "irq.h"
@@ -661,6 +662,10 @@ void __init init_IRQ(void)
 		sun4d_init_IRQ();
 		break;
 
+	case sparc_leon:
+		leon_init_IRQ();
+		break;
+
 	default:
 		prom_printf("Cannot initialize IRQs on this Sun machine...");
 		break;
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 998cadb4e7f..16a47ffe03c 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -235,6 +235,8 @@ void __init setup_arch(char **cmdline_p)
 		sparc_cpu_model = sun4e;
 	if (!strcmp(&cputypval,"sun4u"))
 		sparc_cpu_model = sun4u;
+	if (!strncmp(&cputypval, "leon" , 4))
+		sparc_cpu_model = sparc_leon;
 
 	printk("ARCH: ");
 	switch(sparc_cpu_model) {
@@ -256,6 +258,9 @@ void __init setup_arch(char **cmdline_p)
 	case sun4u:
 		printk("SUN4U\n");
 		break;
+	case sparc_leon:
+		printk("LEON\n");
+		break;
 	default:
 		printk("UNKNOWN!\n");
 		break;
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index 681abe0a459..79836a7dd00 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SPARC32)   += loadmmu.o
 obj-y                   += generic_$(BITS).o
 obj-$(CONFIG_SPARC32)   += extable.o btfixup.o srmmu.o iommu.o io-unit.o
 obj-$(CONFIG_SPARC32)   += hypersparc.o viking.o tsunami.o swift.o
+obj-$(CONFIG_SPARC_LEON)+= leon_mm.o
 
 # Only used by sparc64
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 26bb3919ff1..54114ad0bde 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -34,6 +34,7 @@
 #include <asm/pgalloc.h>	/* bug in asm-generic/tlb.h: check_pgt_cache */
 #include <asm/tlb.h>
 #include <asm/prom.h>
+#include <asm/leon.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
@@ -326,6 +327,9 @@ void __init paging_init(void)
 		sparc_unmapped_base = 0xe0000000;
 		BTFIXUPSET_SETHI(sparc_unmapped_base, 0xe0000000);
 		break;
+	case sparc_leon:
+		leon_init();
+		/* fall through */
 	case sun4m:
 	case sun4d:
 		srmmu_paging_init();
diff --git a/arch/sparc/mm/loadmmu.c b/arch/sparc/mm/loadmmu.c
index 652be05acbe..82ec8f66603 100644
--- a/arch/sparc/mm/loadmmu.c
+++ b/arch/sparc/mm/loadmmu.c
@@ -33,6 +33,7 @@ void __init load_mmu(void)
 		break;
 	case sun4m:
 	case sun4d:
+	case sparc_leon:
 		ld_mmu_srmmu();
 		break;
 	default:
-- 
cgit v1.2.3


From e63829de3d03f92cea2b26119e0aa9a7043b9913 Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:32 +0000
Subject: sparc,leon: Added support for AMBAPP bus.

The device is a AMBA bus if it is a child of prom node "ambapp" (AMBA
plug and play). Two functions
leon_trans_init() and leon_node_init() (defined in
sparc/kernel/leon_kernel.c) are called in the
prom_build_tree() path if CONFIG_SPARC_LEON is
defined. leon_node_init() will build up the device
tree using AMBA plug and play. Also: a extra check was addes to
prom_common.c:build_one_prop()
in case a rom-node is undefined which can happen for SPARC-LEON
because it creates only a minimum
nodes to emulate sparc behaviour.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/of_device_32.c | 40 ++++++++++++++++++++++++++++++++++++++++
 arch/sparc/kernel/prom_32.c      | 33 +++++++++++++++++++++++++++++++++
 arch/sparc/kernel/prom_common.c  | 10 ++++++++--
 3 files changed, 81 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 90396702ea2..4c26eb59e74 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -9,6 +9,8 @@
 #include <linux/irq.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
 
 #include "of_device_common.h"
 
@@ -97,6 +99,35 @@ static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 	return IORESOURCE_MEM;
 }
 
+ /*
+ * AMBAPP bus specific translator
+ */
+
+static int of_bus_ambapp_match(struct device_node *np)
+{
+	return !strcmp(np->name, "ambapp");
+}
+
+static void of_bus_ambapp_count_cells(struct device_node *child,
+				      int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = 1;
+	if (sizec)
+		*sizec = 1;
+}
+
+static int of_bus_ambapp_map(u32 *addr, const u32 *range,
+			     int na, int ns, int pna)
+{
+	return of_bus_default_map(addr, range, na, ns, pna);
+}
+
+static unsigned long of_bus_ambapp_get_flags(const u32 *addr,
+					     unsigned long flags)
+{
+	return IORESOURCE_MEM;
+}
 
 /*
  * Array of bus specific translators
@@ -121,6 +152,15 @@ static struct of_bus of_busses[] = {
 		.map = of_bus_default_map,
 		.get_flags = of_bus_sbus_get_flags,
 	},
+	/* AMBA */
+	{
+		.name = "ambapp",
+		.addr_prop_name = "reg",
+		.match = of_bus_ambapp_match,
+		.count_cells = of_bus_ambapp_count_cells,
+		.map = of_bus_ambapp_map,
+		.get_flags = of_bus_ambapp_get_flags,
+	},
 	/* Default */
 	{
 		.name = "default",
diff --git a/arch/sparc/kernel/prom_32.c b/arch/sparc/kernel/prom_32.c
index fe43e80772d..0a37e8cfd16 100644
--- a/arch/sparc/kernel/prom_32.c
+++ b/arch/sparc/kernel/prom_32.c
@@ -24,6 +24,8 @@
 
 #include <asm/prom.h>
 #include <asm/oplib.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
 
 #include "prom.h"
 
@@ -131,6 +133,35 @@ static void __init ebus_path_component(struct device_node *dp, char *tmp_buf)
 		regs->which_io, regs->phys_addr);
 }
 
+/* "name:vendor:device@irq,addrlo" */
+static void __init ambapp_path_component(struct device_node *dp, char *tmp_buf)
+{
+	struct amba_prom_registers *regs; unsigned int *intr;
+	unsigned int *device, *vendor;
+	struct property *prop;
+
+	prop = of_find_property(dp, "reg", NULL);
+	if (!prop)
+		return;
+	regs = prop->value;
+	prop = of_find_property(dp, "interrupts", NULL);
+	if (!prop)
+		return;
+	intr = prop->value;
+	prop = of_find_property(dp, "vendor", NULL);
+	if (!prop)
+		return;
+	vendor = prop->value;
+	prop = of_find_property(dp, "device", NULL);
+	if (!prop)
+		return;
+	device = prop->value;
+
+	sprintf(tmp_buf, "%s:%d:%d@%x,%x",
+		dp->name, *vendor, *device,
+		*intr, regs->phys_addr);
+}
+
 static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
 {
 	struct device_node *parent = dp->parent;
@@ -143,6 +174,8 @@ static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
 			return sbus_path_component(dp, tmp_buf);
 		if (!strcmp(parent->type, "ebus"))
 			return ebus_path_component(dp, tmp_buf);
+		if (!strcmp(parent->type, "ambapp"))
+			return ambapp_path_component(dp, tmp_buf);
 
 		/* "isa" is handled with platform naming */
 	}
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 0fb5789d43c..138910c6720 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -22,9 +22,12 @@
 #include <linux/of.h>
 #include <asm/prom.h>
 #include <asm/oplib.h>
+#include <asm/leon.h>
 
 #include "prom.h"
 
+void (*prom_build_more)(struct device_node *dp, struct device_node ***nextp);
+
 struct device_node *of_console_device;
 EXPORT_SYMBOL(of_console_device);
 
@@ -161,7 +164,7 @@ static struct property * __init build_one_prop(phandle node, char *prev,
 			name = prom_nextprop(node, prev, p->name);
 		}
 
-		if (strlen(name) == 0) {
+		if (!name || strlen(name) == 0) {
 			tmp = p;
 			return NULL;
 		}
@@ -242,7 +245,7 @@ static struct device_node * __init prom_create_node(phandle node,
 	return dp;
 }
 
-static char * __init build_full_name(struct device_node *dp)
+char * __init build_full_name(struct device_node *dp)
 {
 	int len, ourlen, plen;
 	char *n;
@@ -289,6 +292,9 @@ static struct device_node * __init prom_build_tree(struct device_node *parent,
 
 		dp->child = prom_build_tree(dp, prom_getchild(node), nextp);
 
+		if (prom_build_more)
+			prom_build_more(dp, nextp);
+
 		node = prom_getsibling(node);
 	}
 
-- 
cgit v1.2.3


From 75d9e34698540e96b422293e1d76ab02cc7faefb Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:33 +0000
Subject: sparc, leon: sparc-leon specific SRMMU initialization and bootup
 fixes.

The sparc-leon caches are virtually tagged so a flush is needed on ctx
switch.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/mm/srmmu.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index ade4eb373bd..509b1ffeba6 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -46,6 +46,7 @@
 #include <asm/tsunami.h>
 #include <asm/swift.h>
 #include <asm/turbosparc.h>
+#include <asm/leon.h>
 
 #include <asm/btfixup.h>
 
@@ -569,6 +570,9 @@ static void srmmu_switch_mm(struct mm_struct *old_mm, struct mm_struct *mm,
 		srmmu_ctxd_set(&srmmu_context_table[mm->context], mm->pgd);
 	}
 
+	if (sparc_cpu_model == sparc_leon)
+		leon_switch_mm();
+
 	if (is_hypersparc)
 		hyper_flush_whole_icache();
 
@@ -1977,6 +1981,45 @@ static void __init init_viking(void)
 	poke_srmmu = poke_viking;
 }
 
+#ifdef CONFIG_SPARC_LEON
+
+void __init poke_leonsparc(void)
+{
+}
+
+void __init init_leon(void)
+{
+
+	srmmu_name = "Leon";
+
+	BTFIXUPSET_CALL(flush_cache_all, leon_flush_cache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_cache_mm, leon_flush_cache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_cache_page, leon_flush_pcache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_cache_range, leon_flush_cache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_page_for_dma, leon_flush_dcache_all,
+			BTFIXUPCALL_NORM);
+
+	BTFIXUPSET_CALL(flush_tlb_all, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_tlb_mm, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_tlb_page, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_tlb_range, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+
+	BTFIXUPSET_CALL(__flush_page_to_ram, leon_flush_cache_all,
+			BTFIXUPCALL_NOP);
+	BTFIXUPSET_CALL(flush_sig_insns, leon_flush_cache_all, BTFIXUPCALL_NOP);
+
+	poke_srmmu = poke_leonsparc;
+
+	srmmu_cache_pagetables = 0;
+
+	leon_flush_during_switch = leon_flush_needed();
+}
+#endif
+
 /* Probe for the srmmu chip version. */
 static void __init get_srmmu_type(void)
 {
@@ -1992,7 +2035,15 @@ static void __init get_srmmu_type(void)
 	psr_typ = (psr >> 28) & 0xf;
 	psr_vers = (psr >> 24) & 0xf;
 
-	/* First, check for HyperSparc or Cypress. */
+	/* First, check for sparc-leon. */
+	if (sparc_cpu_model == sparc_leon) {
+		psr_typ = 0xf;	/* hardcoded ids for older models/simulators */
+		psr_vers = 2;
+		init_leon();
+		return;
+	}
+
+	/* Second, check for HyperSparc or Cypress. */
 	if(mod_typ == 1) {
 		switch(mod_rev) {
 		case 7:
-- 
cgit v1.2.3


From f3a8308864f920d2babe76921733d76ec4a11fb8 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 18 Aug 2009 11:35:09 +0900
Subject: sh: Add a few missing irqflags tracing markers.

save_regs contains an SR modification without an irqflags annotation,
which resulted in a missing TRACE_IRQS_OFF in the interrupt exception
path on SH-3/SH4.

I've also moved the TRACE_IRQS_OFF/ON annotation when returning from the
interrupt to just before we call __restore_all. This seems like the most
logical place to put this because the annotation is for when we restore
the SR register so we should delay the annotation until as last as
possible.

We were also missing a TRACE_IRQS_OFF in resume_kernel when
CONFIG_PREEMPT is enabled.

The end result is that this fixes up the lockdep engine debugging support
with CONFIG_PREEMPT enabled on all SH-3/4 parts.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/entry.S |  8 ++++++++
 arch/sh/kernel/entry-common.S  | 27 ++++++++++++++++-----------
 2 files changed, 24 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 67ad6467c69..272636ec5c9 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -508,6 +508,14 @@ ENTRY(handle_interrupt)
 	bsr	save_regs	! needs original pr value in k3
 	 mov	#-1, k2		! default vector kept in k2
 
+	stc	sr, r0	! get status register
+	shlr2	r0
+	and	#0x3c, r0
+	cmp/eq	#0x3c, r0
+	bf	9f
+	TRACE_IRQS_OFF
+9:
+
 	! Setup return address and jump to do_IRQ
 	mov.l	4f, r9		! fetch return address
 	lds	r9, pr		! put return address in pr
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index e63178fefb9..700477601c6 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -77,15 +77,6 @@ ENTRY(ret_from_irq)
 	!
 	mov	#OFF_SR, r0
 	mov.l	@(r0,r15), r0	! get status register
-
-	shlr2	r0
-	and	#0x3c, r0
-	cmp/eq	#0x3c, r0
-	bt	9f
-	TRACE_IRQS_ON
-9:
-	mov	#OFF_SR, r0
-	mov.l	@(r0,r15), r0	! get status register
 	shll	r0
 	shll	r0		! kernel space?
 	get_current_thread_info r8, r0
@@ -96,6 +87,7 @@ ENTRY(ret_from_irq)
 	 nop
 ENTRY(resume_kernel)
 	cli
+	TRACE_IRQS_OFF
 	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
 	tst	r0, r0
 	bf	noresched
@@ -213,12 +205,25 @@ syscall_trace_entry:
 	 mov.l	r0, @(OFF_R0,r15)	! Return value
 
 __restore_all:
-	mov.l	1f, r0
+	mov	#OFF_SR, r0
+	mov.l	@(r0,r15), r0	! get status register
+
+	shlr2	r0
+	and	#0x3c, r0
+	cmp/eq	#0x3c, r0
+	bt	1f
+	TRACE_IRQS_ON
+	bra	2f
+	 nop
+1:
+	TRACE_IRQS_OFF
+2:
+	mov.l	3f, r0
 	jmp	@r0
 	 nop
 
 	.align	2
-1:	.long	restore_all
+3:	.long	restore_all
 
 	.align	2
 syscall_badsys:			! Bad syscall number
-- 
cgit v1.2.3


From 1660e9d3d04b6c636b7171bf6c08ac7b82a7de79 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 17 Aug 2009 14:36:32 +1000
Subject: powerpc/32: Always order writes to halves of 64-bit PTEs

On 32-bit systems with 64-bit PTEs, the PTEs have to be written in two
32-bit halves.  On SMP we write the higher-order half and then the
lower-order half, with a write barrier between the two halves, but on
UP there was no particular ordering of the writes to the two halves.

This extends the ordering that we already do on SMP to the UP case as
well.  The reason is that with the perf_counter subsystem potentially
accessing user memory at interrupt time to get stack traces, we have
to be careful not to create an incorrect but apparently valid PTE even
on UP.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/pgtable.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index eb17da78112..2a5da069714 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -104,8 +104,8 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 	else
 		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
 
-#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
-	/* Second case is 32-bit with 64-bit PTE in SMP mode. In this case, we
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+	/* Second case is 32-bit with 64-bit PTE.  In this case, we
 	 * can just store as long as we do the two halves in the right order
 	 * with a barrier in between. This is possible because we take care,
 	 * in the hash code, to pre-invalidate if the PTE was already hashed,
@@ -140,7 +140,7 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 
 #else
 	/* Anything else just stores the PTE normally. That covers all 64-bit
-	 * cases, and 32-bit non-hash with 64-bit PTEs in UP mode
+	 * cases, and 32-bit non-hash with 32-bit PTEs.
 	 */
 	*ptep = pte;
 #endif
-- 
cgit v1.2.3


From 9c1e105238c474d19905af504f2e7f42d4f71f9e Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 17 Aug 2009 15:17:54 +1000
Subject: powerpc: Allow perf_counters to access user memory at interrupt time

This provides a mechanism to allow the perf_counters code to access
user memory in a PMU interrupt routine.  Such an access can cause
various kinds of interrupt: SLB miss, MMU hash table miss, segment
table miss, or TLB miss, depending on the processor.  This commit
only deals with 64-bit classic/server processors, which use an MMU
hash table.  32-bit processors are already able to access user memory
at interrupt time.  Since we don't soft-disable on 32-bit, we avoid
the possibility of reentering hash_page or the TLB miss handlers,
since they run with interrupts disabled.

On 64-bit processors, an SLB miss interrupt on a user address will
update the slb_cache and slb_cache_ptr fields in the paca.  This is
OK except in the case where a PMU interrupt occurs in switch_slb,
which also accesses those fields.  To prevent this, we hard-disable
interrupts in switch_slb.  Interrupts are already soft-disabled at
this point, and will get hard-enabled when they get soft-enabled
later.

This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice,
and to make sure that it clears the slb_cache_ptr when called from
other callers than switch_slb, the existing routine is renamed to
__slb_flush_and_rebolt, which is called by switch_slb and the new
version of slb_flush_and_rebolt.

Similarly, switch_stab (used on POWER3 and RS64 processors) gets a
hard_irq_disable() to protect the per-cpu variables used there and
in ste_allocate.

If a MMU hashtable miss interrupt occurs, normally we would call
hash_page to look up the Linux PTE for the address and create a HPTE.
However, hash_page is fairly complex and takes some locks, so to
avoid the possibility of deadlock, we check the preemption count
to see if we are in a (pseudo-)NMI handler, and if so, we don't call
hash_page but instead treat it like a bad access that will get
reported up through the exception table mechanism.  An interrupt
whose handler runs even though the interrupt occurred when
soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI
handler, which should use nmi_enter()/nmi_exit() rather than
irq_enter()/irq_exit().

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/asm-offsets.c    |  2 ++
 arch/powerpc/kernel/exceptions-64s.S | 19 ++++++++++++++++++
 arch/powerpc/mm/slb.c                | 37 +++++++++++++++++++++++++-----------
 arch/powerpc/mm/stab.c               | 11 ++++++++++-
 4 files changed, 57 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 561b6465231..197b15646ee 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -67,6 +67,8 @@ int main(void)
 	DEFINE(MMCONTEXTID, offsetof(struct mm_struct, context.id));
 #ifdef CONFIG_PPC64
 	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
+	DEFINE(SIGSEGV, SIGSEGV);
+	DEFINE(NMI_MASK, NMI_MASK);
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eb898112e57..8ac85e08ffa 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -729,6 +729,11 @@ BEGIN_FTR_SECTION
 	bne-	do_ste_alloc		/* If so handle it */
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 
+	clrrdi	r11,r1,THREAD_SHIFT
+	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
+	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
+	bne	77f			/* then don't call hash_page now */
+
 	/*
 	 * On iSeries, we soft-disable interrupts here, then
 	 * hard-enable interrupts so that the hash_page code can spin on
@@ -833,6 +838,20 @@ handle_page_fault:
 	bl	.low_hash_fault
 	b	.ret_from_except
 
+/*
+ * We come here as a result of a DSI at a point where we don't want
+ * to call hash_page, such as when we are accessing memory (possibly
+ * user memory) inside a PMU interrupt that occurred while interrupts
+ * were soft-disabled.  We want to invoke the exception handler for
+ * the access, or panic if there isn't a handler.
+ */
+77:	bl	.save_nvgprs
+	mr	r4,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	li	r5,SIGSEGV
+	bl	.bad_page_fault
+	b	.ret_from_except
+
 	/* here we have a segment miss */
 do_ste_alloc:
 	bl	.ste_allocate		/* try to insert stab entry */
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 5b7038f248b..a685652effe 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -92,15 +92,13 @@ static inline void create_shadowed_slbe(unsigned long ea, int ssize,
 		     : "memory" );
 }
 
-void slb_flush_and_rebolt(void)
+static void __slb_flush_and_rebolt(void)
 {
 	/* If you change this make sure you change SLB_NUM_BOLTED
 	 * appropriately too. */
 	unsigned long linear_llp, vmalloc_llp, lflags, vflags;
 	unsigned long ksp_esid_data, ksp_vsid_data;
 
-	WARN_ON(!irqs_disabled());
-
 	linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
 	vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
 	lflags = SLB_VSID_KERNEL | linear_llp;
@@ -117,12 +115,6 @@ void slb_flush_and_rebolt(void)
 		ksp_vsid_data = get_slb_shadow()->save_area[2].vsid;
 	}
 
-	/*
-	 * We can't take a PMU exception in the following code, so hard
-	 * disable interrupts.
-	 */
-	hard_irq_disable();
-
 	/* We need to do this all in asm, so we're sure we don't touch
 	 * the stack between the slbia and rebolting it. */
 	asm volatile("isync\n"
@@ -139,6 +131,21 @@ void slb_flush_and_rebolt(void)
 		     : "memory");
 }
 
+void slb_flush_and_rebolt(void)
+{
+
+	WARN_ON(!irqs_disabled());
+
+	/*
+	 * We can't take a PMU exception in the following code, so hard
+	 * disable interrupts.
+	 */
+	hard_irq_disable();
+
+	__slb_flush_and_rebolt();
+	get_paca()->slb_cache_ptr = 0;
+}
+
 void slb_vmalloc_update(void)
 {
 	unsigned long vflags;
@@ -180,12 +187,20 @@ static inline int esids_match(unsigned long addr1, unsigned long addr2)
 /* Flush all user entries from the segment table of the current processor. */
 void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 {
-	unsigned long offset = get_paca()->slb_cache_ptr;
+	unsigned long offset;
 	unsigned long slbie_data = 0;
 	unsigned long pc = KSTK_EIP(tsk);
 	unsigned long stack = KSTK_ESP(tsk);
 	unsigned long unmapped_base;
 
+	/*
+	 * We need interrupts hard-disabled here, not just soft-disabled,
+	 * so that a PMU interrupt can't occur, which might try to access
+	 * user memory (to get a stack trace) and possible cause an SLB miss
+	 * which would update the slb_cache/slb_cache_ptr fields in the PACA.
+	 */
+	hard_irq_disable();
+	offset = get_paca()->slb_cache_ptr;
 	if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
 	    offset <= SLB_CACHE_ENTRIES) {
 		int i;
@@ -200,7 +215,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 		}
 		asm volatile("isync" : : : "memory");
 	} else {
-		slb_flush_and_rebolt();
+		__slb_flush_and_rebolt();
 	}
 
 	/* Workaround POWER5 < DD2.1 issue */
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 98cd1dc2ae7..ab5fb48b3e9 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -164,7 +164,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 {
 	struct stab_entry *stab = (struct stab_entry *) get_paca()->stab_addr;
 	struct stab_entry *ste;
-	unsigned long offset = __get_cpu_var(stab_cache_ptr);
+	unsigned long offset;
 	unsigned long pc = KSTK_EIP(tsk);
 	unsigned long stack = KSTK_ESP(tsk);
 	unsigned long unmapped_base;
@@ -172,6 +172,15 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 	/* Force previous translations to complete. DRENG */
 	asm volatile("isync" : : : "memory");
 
+	/*
+	 * We need interrupts hard-disabled here, not just soft-disabled,
+	 * so that a PMU interrupt can't occur, which might try to access
+	 * user memory (to get a stack trace) and possible cause an STAB miss
+	 * which would update the stab_cache/stab_cache_ptr per-cpu variables.
+	 */
+	hard_irq_disable();
+
+	offset = __get_cpu_var(stab_cache_ptr);
 	if (offset <= NR_STAB_CACHE_ENTRIES) {
 		int i;
 
-- 
cgit v1.2.3


From 20002ded4d937ca87aca6253b874920a96a763c4 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Tue, 18 Aug 2009 08:25:32 +1000
Subject: perf_counter: powerpc: Add callchain support

This adds support for tracing callchains for powerpc, both 32-bit
and 64-bit, and both in the kernel and userspace, from PMU interrupt
context.

The first three entries stored for each callchain are the NIP (next
instruction pointer), LR (link register), and the contents of the LR
save area in the second stack frame (the first is ignored because the
ABI convention on powerpc is that functions save their return address
in their caller's stack frame).  Because leaf functions don't have to
save their return address (LR value) and don't have to establish a
stack frame, it's possible for either or both of LR and the second
stack frame's LR save area to have valid return addresses in them.
This is basically impossible to disambiguate without either reading
the code or looking at auxiliary information such as CFI tables.
Since we don't want to do either of those things at interrupt time,
we store both LR and the second stack frame's LR save area.

Once we get past the second stack frame, there is no ambiguity; all
return addresses we get are reliable.

For kernel traces, we check whether they are valid kernel instruction
addresses and store zero instead if they are not (rather than
omitting them, which would make it impossible for userspace to know
which was which).  We also store zero instead of the second stack
frame's LR save area value if it is the same as LR.

For kernel traces, we check for interrupt frames, and for user traces,
we check for signal frames.  In each case, since we're starting a new
trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace
knows that the next three entries are NIP, LR and the second stack frame
for the interrupted context.

We read user memory with __get_user_inatomic.  On 64-bit, if this
PMU interrupt occurred while interrupts are soft-disabled, and
there is no MMU hash table entry for the page, we will get an
-EFAULT return from __get_user_inatomic even if there is a valid
Linux PTE for the page, since hash_page isn't reentrant.  Thus we
have code here to read the Linux PTE and access the page via the
kernel linear mapping.  Since 64-bit doesn't use (or need) highmem
there is no need to do kmap_atomic.  On 32-bit, we don't do soft
interrupt disabling, so this complication doesn't occur and there
is no need to fall back to reading the Linux PTE, since hash_page
(or the TLB miss handler) will get called automatically if necessary.

Note that we cannot get PMU interrupts in the interval during
context switch between switch_mm (which switches the user address
space) and switch_to (which actually changes current to the new
process).  On 64-bit this is because interrupts are hard-disabled
in switch_mm and stay hard-disabled until they are soft-enabled
later, after switch_to has returned.  So there is no possibility
of trying to do a user stack trace when the user address space is
not current's address space.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/Makefile         |   2 +-
 arch/powerpc/kernel/perf_callchain.c | 527 +++++++++++++++++++++++++++++++++++
 2 files changed, 528 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/kernel/perf_callchain.c

(limited to 'arch')

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b73396b9390..9619285f64e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -97,7 +97,7 @@ obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
-obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_counter.o
+obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_counter.o perf_callchain.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c
new file mode 100644
index 00000000000..f74b62c6751
--- /dev/null
+++ b/arch/powerpc/kernel/perf_callchain.c
@@ -0,0 +1,527 @@
+/*
+ * Performance counter callchain support - powerpc architecture code
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_counter.h>
+#include <linux/percpu.h>
+#include <linux/uaccess.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/pgtable.h>
+#include <asm/sigcontext.h>
+#include <asm/ucontext.h>
+#include <asm/vdso.h>
+#ifdef CONFIG_PPC64
+#include "ppc32.h"
+#endif
+
+/*
+ * Store another value in a callchain_entry.
+ */
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+	unsigned int nr = entry->nr;
+
+	if (nr < PERF_MAX_STACK_DEPTH) {
+		entry->ip[nr] = ip;
+		entry->nr = nr + 1;
+	}
+}
+
+/*
+ * Is sp valid as the address of the next kernel stack frame after prev_sp?
+ * The next frame may be in a different stack area but should not go
+ * back down in the same stack area.
+ */
+static int valid_next_sp(unsigned long sp, unsigned long prev_sp)
+{
+	if (sp & 0xf)
+		return 0;		/* must be 16-byte aligned */
+	if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+		return 0;
+	if (sp >= prev_sp + STACK_FRAME_OVERHEAD)
+		return 1;
+	/*
+	 * sp could decrease when we jump off an interrupt stack
+	 * back to the regular process stack.
+	 */
+	if ((sp & ~(THREAD_SIZE - 1)) != (prev_sp & ~(THREAD_SIZE - 1)))
+		return 1;
+	return 0;
+}
+
+static void perf_callchain_kernel(struct pt_regs *regs,
+				  struct perf_callchain_entry *entry)
+{
+	unsigned long sp, next_sp;
+	unsigned long next_ip;
+	unsigned long lr;
+	long level = 0;
+	unsigned long *fp;
+
+	lr = regs->link;
+	sp = regs->gpr[1];
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	callchain_store(entry, regs->nip);
+
+	if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+		return;
+
+	for (;;) {
+		fp = (unsigned long *) sp;
+		next_sp = fp[0];
+
+		if (next_sp == sp + STACK_INT_FRAME_SIZE &&
+		    fp[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
+			/*
+			 * This looks like an interrupt frame for an
+			 * interrupt that occurred in the kernel
+			 */
+			regs = (struct pt_regs *)(sp + STACK_FRAME_OVERHEAD);
+			next_ip = regs->nip;
+			lr = regs->link;
+			level = 0;
+			callchain_store(entry, PERF_CONTEXT_KERNEL);
+
+		} else {
+			if (level == 0)
+				next_ip = lr;
+			else
+				next_ip = fp[STACK_FRAME_LR_SAVE];
+
+			/*
+			 * We can't tell which of the first two addresses
+			 * we get are valid, but we can filter out the
+			 * obviously bogus ones here.  We replace them
+			 * with 0 rather than removing them entirely so
+			 * that userspace can tell which is which.
+			 */
+			if ((level == 1 && next_ip == lr) ||
+			    (level <= 1 && !kernel_text_address(next_ip)))
+				next_ip = 0;
+
+			++level;
+		}
+
+		callchain_store(entry, next_ip);
+		if (!valid_next_sp(next_sp, sp))
+			return;
+		sp = next_sp;
+	}
+}
+
+#ifdef CONFIG_PPC64
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define is_huge_psize(pagesize)	(HPAGE_SHIFT && mmu_huge_psizes[pagesize])
+#else
+#define is_huge_psize(pagesize)	0
+#endif
+
+/*
+ * On 64-bit we don't want to invoke hash_page on user addresses from
+ * interrupt context, so if the access faults, we read the page tables
+ * to find which page (if any) is mapped and access it directly.
+ */
+static int read_user_stack_slow(void __user *ptr, void *ret, int nb)
+{
+	pgd_t *pgdir;
+	pte_t *ptep, pte;
+	int pagesize;
+	unsigned long addr = (unsigned long) ptr;
+	unsigned long offset;
+	unsigned long pfn;
+	void *kaddr;
+
+	pgdir = current->mm->pgd;
+	if (!pgdir)
+		return -EFAULT;
+
+	pagesize = get_slice_psize(current->mm, addr);
+
+	/* align address to page boundary */
+	offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1);
+	addr -= offset;
+
+	if (is_huge_psize(pagesize))
+		ptep = huge_pte_offset(current->mm, addr);
+	else
+		ptep = find_linux_pte(pgdir, addr);
+
+	if (ptep == NULL)
+		return -EFAULT;
+	pte = *ptep;
+	if (!pte_present(pte) || !(pte_val(pte) & _PAGE_USER))
+		return -EFAULT;
+	pfn = pte_pfn(pte);
+	if (!page_is_ram(pfn))
+		return -EFAULT;
+
+	/* no highmem to worry about here */
+	kaddr = pfn_to_kaddr(pfn);
+	memcpy(ret, kaddr + offset, nb);
+	return 0;
+}
+
+static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
+{
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned long) ||
+	    ((unsigned long)ptr & 7))
+		return -EFAULT;
+
+	if (!__get_user_inatomic(*ret, ptr))
+		return 0;
+
+	return read_user_stack_slow(ptr, ret, 8);
+}
+
+static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
+{
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
+	    ((unsigned long)ptr & 3))
+		return -EFAULT;
+
+	if (!__get_user_inatomic(*ret, ptr))
+		return 0;
+
+	return read_user_stack_slow(ptr, ret, 4);
+}
+
+static inline int valid_user_sp(unsigned long sp, int is_64)
+{
+	if (!sp || (sp & 7) || sp > (is_64 ? TASK_SIZE : 0x100000000UL) - 32)
+		return 0;
+	return 1;
+}
+
+/*
+ * 64-bit user processes use the same stack frame for RT and non-RT signals.
+ */
+struct signal_frame_64 {
+	char		dummy[__SIGNAL_FRAMESIZE];
+	struct ucontext	uc;
+	unsigned long	unused[2];
+	unsigned int	tramp[6];
+	struct siginfo	*pinfo;
+	void		*puc;
+	struct siginfo	info;
+	char		abigap[288];
+};
+
+static int is_sigreturn_64_address(unsigned long nip, unsigned long fp)
+{
+	if (nip == fp + offsetof(struct signal_frame_64, tramp))
+		return 1;
+	if (vdso64_rt_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso64_rt_sigtramp)
+		return 1;
+	return 0;
+}
+
+/*
+ * Do some sanity checking on the signal frame pointed to by sp.
+ * We check the pinfo and puc pointers in the frame.
+ */
+static int sane_signal_64_frame(unsigned long sp)
+{
+	struct signal_frame_64 __user *sf;
+	unsigned long pinfo, puc;
+
+	sf = (struct signal_frame_64 __user *) sp;
+	if (read_user_stack_64((unsigned long __user *) &sf->pinfo, &pinfo) ||
+	    read_user_stack_64((unsigned long __user *) &sf->puc, &puc))
+		return 0;
+	return pinfo == (unsigned long) &sf->info &&
+		puc == (unsigned long) &sf->uc;
+}
+
+static void perf_callchain_user_64(struct pt_regs *regs,
+				   struct perf_callchain_entry *entry)
+{
+	unsigned long sp, next_sp;
+	unsigned long next_ip;
+	unsigned long lr;
+	long level = 0;
+	struct signal_frame_64 __user *sigframe;
+	unsigned long __user *fp, *uregs;
+
+	next_ip = regs->nip;
+	lr = regs->link;
+	sp = regs->gpr[1];
+	callchain_store(entry, PERF_CONTEXT_USER);
+	callchain_store(entry, next_ip);
+
+	for (;;) {
+		fp = (unsigned long __user *) sp;
+		if (!valid_user_sp(sp, 1) || read_user_stack_64(fp, &next_sp))
+			return;
+		if (level > 0 && read_user_stack_64(&fp[2], &next_ip))
+			return;
+
+		/*
+		 * Note: the next_sp - sp >= signal frame size check
+		 * is true when next_sp < sp, which can happen when
+		 * transitioning from an alternate signal stack to the
+		 * normal stack.
+		 */
+		if (next_sp - sp >= sizeof(struct signal_frame_64) &&
+		    (is_sigreturn_64_address(next_ip, sp) ||
+		     (level <= 1 && is_sigreturn_64_address(lr, sp))) &&
+		    sane_signal_64_frame(sp)) {
+			/*
+			 * This looks like an signal frame
+			 */
+			sigframe = (struct signal_frame_64 __user *) sp;
+			uregs = sigframe->uc.uc_mcontext.gp_regs;
+			if (read_user_stack_64(&uregs[PT_NIP], &next_ip) ||
+			    read_user_stack_64(&uregs[PT_LNK], &lr) ||
+			    read_user_stack_64(&uregs[PT_R1], &sp))
+				return;
+			level = 0;
+			callchain_store(entry, PERF_CONTEXT_USER);
+			callchain_store(entry, next_ip);
+			continue;
+		}
+
+		if (level == 0)
+			next_ip = lr;
+		callchain_store(entry, next_ip);
+		++level;
+		sp = next_sp;
+	}
+}
+
+static inline int current_is_64bit(void)
+{
+	/*
+	 * We can't use test_thread_flag() here because we may be on an
+	 * interrupt stack, and the thread flags don't get copied over
+	 * from the thread_info on the main stack to the interrupt stack.
+	 */
+	return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT);
+}
+
+#else  /* CONFIG_PPC64 */
+/*
+ * On 32-bit we just access the address and let hash_page create a
+ * HPTE if necessary, so there is no need to fall back to reading
+ * the page tables.  Since this is called at interrupt level,
+ * do_page_fault() won't treat a DSI as a page fault.
+ */
+static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
+{
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
+	    ((unsigned long)ptr & 3))
+		return -EFAULT;
+
+	return __get_user_inatomic(*ret, ptr);
+}
+
+static inline void perf_callchain_user_64(struct pt_regs *regs,
+					  struct perf_callchain_entry *entry)
+{
+}
+
+static inline int current_is_64bit(void)
+{
+	return 0;
+}
+
+static inline int valid_user_sp(unsigned long sp, int is_64)
+{
+	if (!sp || (sp & 7) || sp > TASK_SIZE - 32)
+		return 0;
+	return 1;
+}
+
+#define __SIGNAL_FRAMESIZE32	__SIGNAL_FRAMESIZE
+#define sigcontext32		sigcontext
+#define mcontext32		mcontext
+#define ucontext32		ucontext
+#define compat_siginfo_t	struct siginfo
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * Layout for non-RT signal frames
+ */
+struct signal_frame_32 {
+	char			dummy[__SIGNAL_FRAMESIZE32];
+	struct sigcontext32	sctx;
+	struct mcontext32	mctx;
+	int			abigap[56];
+};
+
+/*
+ * Layout for RT signal frames
+ */
+struct rt_signal_frame_32 {
+	char			dummy[__SIGNAL_FRAMESIZE32 + 16];
+	compat_siginfo_t	info;
+	struct ucontext32	uc;
+	int			abigap[56];
+};
+
+static int is_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+	if (nip == fp + offsetof(struct signal_frame_32, mctx.mc_pad))
+		return 1;
+	if (vdso32_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso32_sigtramp)
+		return 1;
+	return 0;
+}
+
+static int is_rt_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+	if (nip == fp + offsetof(struct rt_signal_frame_32,
+				 uc.uc_mcontext.mc_pad))
+		return 1;
+	if (vdso32_rt_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso32_rt_sigtramp)
+		return 1;
+	return 0;
+}
+
+static int sane_signal_32_frame(unsigned int sp)
+{
+	struct signal_frame_32 __user *sf;
+	unsigned int regs;
+
+	sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+	if (read_user_stack_32((unsigned int __user *) &sf->sctx.regs, &regs))
+		return 0;
+	return regs == (unsigned long) &sf->mctx;
+}
+
+static int sane_rt_signal_32_frame(unsigned int sp)
+{
+	struct rt_signal_frame_32 __user *sf;
+	unsigned int regs;
+
+	sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+	if (read_user_stack_32((unsigned int __user *) &sf->uc.uc_regs, &regs))
+		return 0;
+	return regs == (unsigned long) &sf->uc.uc_mcontext;
+}
+
+static unsigned int __user *signal_frame_32_regs(unsigned int sp,
+				unsigned int next_sp, unsigned int next_ip)
+{
+	struct mcontext32 __user *mctx = NULL;
+	struct signal_frame_32 __user *sf;
+	struct rt_signal_frame_32 __user *rt_sf;
+
+	/*
+	 * Note: the next_sp - sp >= signal frame size check
+	 * is true when next_sp < sp, for example, when
+	 * transitioning from an alternate signal stack to the
+	 * normal stack.
+	 */
+	if (next_sp - sp >= sizeof(struct signal_frame_32) &&
+	    is_sigreturn_32_address(next_ip, sp) &&
+	    sane_signal_32_frame(sp)) {
+		sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+		mctx = &sf->mctx;
+	}
+
+	if (!mctx && next_sp - sp >= sizeof(struct rt_signal_frame_32) &&
+	    is_rt_sigreturn_32_address(next_ip, sp) &&
+	    sane_rt_signal_32_frame(sp)) {
+		rt_sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+		mctx = &rt_sf->uc.uc_mcontext;
+	}
+
+	if (!mctx)
+		return NULL;
+	return mctx->mc_gregs;
+}
+
+static void perf_callchain_user_32(struct pt_regs *regs,
+				   struct perf_callchain_entry *entry)
+{
+	unsigned int sp, next_sp;
+	unsigned int next_ip;
+	unsigned int lr;
+	long level = 0;
+	unsigned int __user *fp, *uregs;
+
+	next_ip = regs->nip;
+	lr = regs->link;
+	sp = regs->gpr[1];
+	callchain_store(entry, PERF_CONTEXT_USER);
+	callchain_store(entry, next_ip);
+
+	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		fp = (unsigned int __user *) (unsigned long) sp;
+		if (!valid_user_sp(sp, 0) || read_user_stack_32(fp, &next_sp))
+			return;
+		if (level > 0 && read_user_stack_32(&fp[1], &next_ip))
+			return;
+
+		uregs = signal_frame_32_regs(sp, next_sp, next_ip);
+		if (!uregs && level <= 1)
+			uregs = signal_frame_32_regs(sp, next_sp, lr);
+		if (uregs) {
+			/*
+			 * This looks like an signal frame, so restart
+			 * the stack trace with the values in it.
+			 */
+			if (read_user_stack_32(&uregs[PT_NIP], &next_ip) ||
+			    read_user_stack_32(&uregs[PT_LNK], &lr) ||
+			    read_user_stack_32(&uregs[PT_R1], &sp))
+				return;
+			level = 0;
+			callchain_store(entry, PERF_CONTEXT_USER);
+			callchain_store(entry, next_ip);
+			continue;
+		}
+
+		if (level == 0)
+			next_ip = lr;
+		callchain_store(entry, next_ip);
+		++level;
+		sp = next_sp;
+	}
+}
+
+/*
+ * Since we can't get PMU interrupts inside a PMU interrupt handler,
+ * we don't need separate irq and nmi entries here.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+	entry->nr = 0;
+
+	if (current->pid == 0)		/* idle task? */
+		return entry;
+
+	if (!user_mode(regs)) {
+		perf_callchain_kernel(regs, entry);
+		if (current->mm)
+			regs = task_pt_regs(current);
+		else
+			regs = NULL;
+	}
+
+	if (regs) {
+		if (current_is_64bit())
+			perf_callchain_user_64(regs, entry);
+		else
+			perf_callchain_user_32(regs, entry);
+	}
+
+	return entry;
+}
-- 
cgit v1.2.3


From 6b99ecec25c8fd501e74306f5d23dd0365065e2a Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 6 Aug 2009 23:00:38 +0200
Subject: microblaze: use the generic ack_bad_irq implementation

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/hardirq.h | 2 --
 arch/microblaze/kernel/irq.c          | 9 ---------
 2 files changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h
index 41e1e1aa36a..cd1ac9aad56 100644
--- a/arch/microblaze/include/asm/hardirq.h
+++ b/arch/microblaze/include/asm/hardirq.h
@@ -12,8 +12,6 @@
 /* should be defined in each interrupt controller driver */
 extern unsigned int get_irq(struct pt_regs *regs);
 
-#define ack_bad_irq ack_bad_irq
-void ack_bad_irq(unsigned int irq);
 #include <asm-generic/hardirq.h>
 
 #endif /* _ASM_MICROBLAZE_HARDIRQ_H */
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index f688ee93e3b..7d5ddd62d4d 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -30,15 +30,6 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 }
 EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
-}
-
 static u32 concurrent_irq;
 
 void do_IRQ(struct pt_regs *regs)
-- 
cgit v1.2.3


From 892ee92b81b6e7fa5f6147c96e11c6c1b9802fc6 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Wed, 29 Jul 2009 22:08:40 +1000
Subject: microblaze: Sane handling of missing timer/intc in device tree

This code path doesn't test any returned pointers for NULL, leading to a bad
kernel page fault if there's no timer/intc found.

Slightly better is to BUG(), but even better still would be a printk beforehand.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/intc.c  | 2 ++
 arch/microblaze/kernel/timer.c | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index b15605299a5..6eea6f92b84 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -12,6 +12,7 @@
 #include <linux/irq.h>
 #include <asm/page.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 
 #include <asm/prom.h>
 #include <asm/irq.h>
@@ -130,6 +131,7 @@ void __init init_IRQ(void)
 		if (intc)
 			break;
 	}
+	BUG_ON(!intc);
 
 	intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
 	intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index bdfa2f9f0c8..5499deae7fa 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -22,6 +22,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 #include <asm/cpuinfo.h>
 #include <asm/setup.h>
 #include <asm/prom.h>
@@ -234,6 +235,7 @@ void __init time_init(void)
 		if (timer)
 			break;
 	}
+	BUG_ON(!timer);
 
 	timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
 	timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
-- 
cgit v1.2.3


From 2856ed35ead295a7cc8788d9ba860e746dfc92bb Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 6 Aug 2009 16:00:52 +0200
Subject: microblaze: Enable ppoll syscall

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/syscall_table.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 216db817beb..457216097df 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -313,7 +313,7 @@ ENTRY(sys_call_table)
 	.long sys_fchmodat
 	.long sys_faccessat
 	.long sys_ni_syscall /* pselect6 */
-	.long sys_ni_syscall /* sys_ppoll */
+	.long sys_ppoll
 	.long sys_unshare		/* 310 */
 	.long sys_set_robust_list
 	.long sys_get_robust_list
-- 
cgit v1.2.3


From 8f37b6c9852ff79cc8472c44ea6f6485dfd58bd2 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 11 Aug 2009 12:36:12 +0200
Subject: microblaze: Use klimit instead of _end for memory init

For noMMU system when you use larger rootfs image
there is problem with using _end label because
we increase klimit but in memory initialization
we use still _end which is wrong. Larger mtd rootfs
was rewritten by init_bootmem_node.

MMU kernel use static initialization where klimit
is setup to _end. There is no any other hanling
with klimit.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/mm/init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 8d92c4efe9a..f207f1a94db 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -130,13 +130,13 @@ void __init setup_memory(void)
 	 * (in case the address isn't page-aligned).
 	 */
 #ifndef CONFIG_MMU
-	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
+	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)),
 					min_low_pfn, max_low_pfn);
 #else
 	map_size = init_bootmem_node(&contig_page_data,
-		PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
+	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);
-- 
cgit v1.2.3


From 1fef7891755d99039592aa8d1ed02e981f38de15 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 18 Aug 2009 11:05:11 +0200
Subject: microblaze: Update Microblaze defconfigs

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/configs/mmu_defconfig   | 70 +++++++++++++------------
 arch/microblaze/configs/nommu_defconfig | 91 ++++++++++++++++++++-------------
 2 files changed, 91 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index bd0b85ec38f..09c32962b66 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Fri May 22 10:02:33 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 11:00:02 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -18,7 +18,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
+# CONFIG_PCI is not set
+CONFIG_NO_DMA=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -59,8 +63,8 @@ CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
 # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
 # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -71,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -84,13 +87,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -102,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Exectuable file formats
@@ -262,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -325,7 +338,6 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -344,7 +356,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -410,6 +422,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -418,12 +435,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -433,22 +444,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -469,9 +465,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -485,12 +484,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -678,6 +680,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_KMEMCHECK is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_HEART_BEAT=y
 CONFIG_DEBUG_BOOTMEM=y
@@ -793,6 +796,5 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index 4ef6af0a8f3..8b638615a97 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 11 09:01:02 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 10:35:30 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -17,9 +17,12 @@ CONFIG_GENERIC_TIME=y
 # CONFIG_GENERIC_TIME_VSYSCALL is not set
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
 # CONFIG_PCI is not set
-# CONFIG_NO_DMA is not set
+CONFIG_NO_DMA=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -64,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -76,13 +78,23 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -95,7 +107,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,8 +168,16 @@ CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyUL0,115200"
 # CONFIG_CMDLINE_FORCE is not set
 CONFIG_OF=y
-CONFIG_OF_DEVICE=y
 CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_KERNEL_START=0x90000000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -169,7 +189,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -237,6 +257,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -254,7 +275,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -353,6 +378,7 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -364,6 +390,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
@@ -383,7 +410,6 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -402,7 +428,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -463,23 +489,25 @@ CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -489,22 +517,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -520,9 +533,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
@@ -543,9 +557,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -558,12 +575,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -813,6 +833,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 7a01be28bac860086dbf659665d70928ae11c192 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 18 Aug 2009 06:51:28 +0000
Subject: sh: mach-kfr2409: add FLLFRQ value for PLL correction.

FLLFRQ setting is needed to use correct PLL clock for kfr2409.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
index 9c85088728a..25801d495c5 100644
--- a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
+++ b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
@@ -24,6 +24,7 @@ LIST "setup clocks"
 ED 0xa4150004, 0x00000050
 ED 0xa4150000, 0x91053508
 WAIT 1
+ED 0xa4150050, 0x00000340
 ED 0xa4150024, 0x00005000
 
 LIST "setup pins"
-- 
cgit v1.2.3


From b2ea8b421515ddd692c88fc5afb0e7f93e96e6cb Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 18 Aug 2009 06:51:47 +0000
Subject: sh: clkfwk: Support additional IFC divisor on SH7724.

This patch updates the FRQCRA.IFC divisor values for SH7724. Despite
not being initially documented, the / 3 mode is also support for the IFC
division.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 34611d97378..627588dfddf 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -127,7 +127,7 @@ struct clk *main_clks[] = {
 	&div3_clk,
 };
 
-static int divisors[] = { 2, 0, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 0, 24, 32, 36, 48, 0, 72 };
 
 static struct clk_div_mult_table div4_table = {
 	.divisors = divisors,
-- 
cgit v1.2.3


From e174d13010a6bd52045466bc35ca5a86e3f3ba9b Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 18 Aug 2009 07:00:20 +0000
Subject: sh: Prevent heartbeat from scribbling over non-LED bits.

While most platforms implement LED banks in sets of 8/16/32, some use
different configurations. This adds a LED mask to the heartbeat platform
data to allow platforms to constrain the bitmap, which is otherwise
derived from the register size.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/heartbeat.c     | 10 ++++++++++
 arch/sh/include/asm/heartbeat.h |  1 +
 2 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index 938817e34e2..a9339a6174f 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -40,14 +40,19 @@ static inline void heartbeat_toggle_bit(struct heartbeat_data *hd,
 	if (inverted)
 		new = ~new;
 
+	new &= hd->mask;
+
 	switch (hd->regsize) {
 	case 32:
+		new |= ioread32(hd->base) & ~hd->mask;
 		iowrite32(new, hd->base);
 		break;
 	case 16:
+		new |= ioread16(hd->base) & ~hd->mask;
 		iowrite16(new, hd->base);
 		break;
 	default:
+		new |= ioread8(hd->base) & ~hd->mask;
 		iowrite8(new, hd->base);
 		break;
 	}
@@ -72,6 +77,7 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	struct heartbeat_data *hd;
+	int i;
 
 	if (unlikely(pdev->num_resources != 1)) {
 		dev_err(&pdev->dev, "invalid number of resources\n");
@@ -107,6 +113,10 @@ static int heartbeat_drv_probe(struct platform_device *pdev)
 		hd->nr_bits = ARRAY_SIZE(default_bit_pos);
 	}
 
+	hd->mask = 0;
+	for (i = 0; i < hd->nr_bits; i++)
+		hd->mask |= (1 << hd->bit_pos[i]);
+
 	if (!hd->regsize)
 		hd->regsize = 8;	/* default access size */
 
diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h
index 724a43ed245..caaafe5a3ef 100644
--- a/arch/sh/include/asm/heartbeat.h
+++ b/arch/sh/include/asm/heartbeat.h
@@ -11,6 +11,7 @@ struct heartbeat_data {
 	unsigned int nr_bits;
 	struct timer_list timer;
 	unsigned int regsize;
+	unsigned int mask;
 	unsigned long flags;
 };
 
-- 
cgit v1.2.3


From 78b89ecd731798f2fec8cc26ca90739253cec33c Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Tue, 18 Aug 2009 16:41:33 +0100
Subject: i386: Fix section mismatches for init code with !HOTPLUG_CPU

Commit 0e83815be719d3391bf5ea24b7fe696c07dbd417 changed the
section the initial_code variable gets allocated in, in an
attempt to address a section conflict warning. This, however
created a new section conflict when building without
HOTPLUG_CPU. The apparently only (reasonable) way to address
this is to always use __REFDATA.

Once at it, also fix a second section mismatch when not using
HOTPLUG_CPU.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4A8AE7CD020000780001054B@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/head_32.S | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 0d98a01cbdb..cc827ac9e8d 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -261,9 +261,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
  * which will be freed later
  */
 
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.text,"ax",@progbits
-#endif
+__CPUINIT
 
 #ifdef CONFIG_SMP
 ENTRY(startup_32_smp)
@@ -602,11 +600,7 @@ ignore_int:
 #endif
 	iret
 
-#ifndef CONFIG_HOTPLUG_CPU
-	__CPUINITDATA
-#else
 	__REFDATA
-#endif
 .align 4
 ENTRY(initial_code)
 	.long i386_start_kernel
-- 
cgit v1.2.3


From 9e2a7e6f5f1091965c78e01e87af05607bbf937f Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 18 Aug 2009 13:47:30 -0700
Subject: iop33x: update defconfig (default atu to on)

By default the iop3xx configurations are set to boot the platforms over
an nfs root configuration.  Since commit c34002c1 "iop: unconditionally
initialize the ATU on platforms known to be 'hosts'" this configuration
also requires iop3xx_init_atu=y to be specified on the kernel command
line.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/configs/iop33x_defconfig | 554 +++++++++++++++++++++++++++++---------
 1 file changed, 429 insertions(+), 125 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index eec48829826..ed2d59d0182 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,29 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:27 2007
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 13:41:41 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,21 +37,39 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -67,29 +82,48 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +137,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -112,15 +147,15 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
@@ -128,19 +163,26 @@ CONFIG_ARCH_IOP33X=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_IOP3XX_ATU=y
 
 #
 # IOP33x Implementation Options
@@ -151,14 +193,6 @@ CONFIG_IOP3XX_ATU=y
 #
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_IOP=y
 
 #
@@ -168,6 +202,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -178,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_ARM_THUMB is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 # CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
 
@@ -190,40 +224,54 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -239,6 +287,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -247,11 +297,7 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -264,6 +310,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -310,6 +357,7 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -317,6 +365,7 @@ CONFIG_IPV6=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -326,24 +375,31 @@ CONFIG_IPV6=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -357,7 +413,9 @@ CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,12 +424,14 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -421,9 +481,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -446,6 +504,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -463,14 +526,29 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -492,10 +570,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -512,6 +586,8 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -520,13 +596,18 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -543,15 +624,18 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
@@ -568,27 +652,34 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -596,23 +687,34 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -620,13 +722,16 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -670,10 +775,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -692,11 +800,12 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -705,16 +814,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -722,50 +829,82 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IOP3XX=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IOP3XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -773,13 +912,17 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -794,16 +937,23 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -812,28 +962,38 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -854,15 +1014,16 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -870,14 +1031,21 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
@@ -893,6 +1061,12 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -901,10 +1075,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
@@ -913,16 +1088,22 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -941,15 +1122,13 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -959,29 +1138,31 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1013,9 +1194,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1023,6 +1201,7 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1030,10 +1209,17 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1047,16 +1233,41 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1065,24 +1276,117 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=y
 CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 5b9eda3313b678f20f2bec08e8173f93e85f6c14 Mon Sep 17 00:00:00 2001
From: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Fri, 31 Jul 2009 12:16:21 +0300
Subject: iop3xx: ATU and PCI memory configuration corrected

There are two 64 MB outbound memory windows at bus addresses
0x80000000..0x83ffffff and 0x84000000..0x87ffffff for PCI
memory. Currently, on iop32x, only the lower window is available for
allocations, limiting the available space to 64 MB. On iop33x the full
128 MB can be allocated, but the translation value is wrong for the
upper window.

The patch enables the full 128 MB space on iop32x and corrects the
initialization of OMWTVR1. Redundant definitions are deleted. Tested
using a Thecus N2100 board with a graphics adapter in the expansion
slot. Both windows are in use:

  00:05.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics
  Innovation) Volari Z7 (prog-if 00 [VGA controller])
  [...]
	Region 0: Memory at 80000000 (32-bit, prefetchable) [size=64M]
	Region 1: Memory at 84080000 (32-bit, non-prefetchable) [size=256K]

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop3xx.h     | 1 +
 arch/arm/mach-iop32x/include/mach/iop32x.h | 2 --
 arch/arm/mach-iop33x/include/mach/iop33x.h | 2 --
 arch/arm/plat-iop/pci.c                    | 3 ++-
 4 files changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 4b8e7f55992..8d60ad267e3 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
  * IOP3XX I/O and Mem space regions for PCI autoconfiguration
  */
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
 #define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index abd9eb49f10..941f363aca5 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -31,7 +31,5 @@
 #define IOP32X_MAX_RAM_SIZE            0x40000000UL
 #define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
 
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index 24567316ec8..a89c0a234bf 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -36,8 +36,6 @@
 #define IOP33X_MAX_RAM_SIZE		0x80000000UL
 #define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
 
 
 #endif
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 77fa7cc7d16..ce31f316ac7 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -257,7 +257,8 @@ void __init iop3xx_atu_setup(void)
 	*IOP3XX_OUMWTVR0 = 0;
 
 	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
+	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
+			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
 	*IOP3XX_OUMWTVR1 = 0;
 
 	/* BAR 3 ( Disabled ) */
-- 
cgit v1.2.3


From a692838dcaacb5f6f05fac73abb99d92dd7b1021 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 2 Aug 2009 10:46:45 +0200
Subject: arch/arm/plat-iop: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/plat-iop/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 3695bbe3ee2..8da95d57c21 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -85,7 +85,7 @@ void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
 
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	ticks_per_usec = tick_rate / 1000000;
 	next_jiffy_time = 0xffffffff;
 	iop_tick_rate = tick_rate;
-- 
cgit v1.2.3


From e2c6cbd9ace61039d3de39e717195e38f1492aee Mon Sep 17 00:00:00 2001
From: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Date: Tue, 18 Aug 2009 20:16:55 -0700
Subject: sparc: sys32.S incorrect compat-layer splice() system call

I think arch/sparc/kernel/sys32.S has an incorrect splice definition:

SIGN2(sys32_splice, sys_splice, %o0, %o1)

The splice() prototype looks like :

       long splice(int fd_in, loff_t *off_in, int fd_out,
                   loff_t *off_out, size_t len, unsigned int flags);

So I think we should have :

SIGN2(sys32_splice, sys_splice, %o0, %o2)

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sys32.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index 577f8fab8b6..aed94869ad6 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -134,7 +134,7 @@ SIGN1(sys32_getpeername, sys_getpeername, %o0)
 SIGN1(sys32_getsockname, sys_getsockname, %o0)
 SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1)
 SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2)
-SIGN2(sys32_splice, sys_splice, %o0, %o1)
+SIGN2(sys32_splice, sys_splice, %o0, %o2)
 SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
 SIGN2(sys32_tee, sys_tee, %o0, %o1)
 SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
-- 
cgit v1.2.3


From a9919646d12a13bea7eb74b996686f900dffb120 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 18 Aug 2009 23:44:08 -0700
Subject: sparc32: Kill trap table freeing code.

Normally, srmmu uses different trap table register values to allow
determination of the cpu we're on.  All of the trap tables have
identical content, they just sit at different offsets from the first
trap table, and the offset shifted down and masked out determines
the cpu we are on.

The code tries to free them up when they aren't actually used
(don't have all 4 cpus, we're on sun4d, etc.) but that causes
problems.

For one thing it triggers false positives in the DMA debugging
code.  And fixing that up while preserving this relative offset
thing isn't trivial.

So just kill the freeing code, it costs us at most 3 pages, big
deal...

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sun4d_smp.c | 22 ----------------------
 arch/sparc/kernel/sun4m_smp.c | 26 --------------------------
 2 files changed, 48 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 54fb02468f0..68791cad7b7 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -162,9 +162,6 @@ extern void cpu_panic(void);
  */
  
 extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
 
 void __init smp4d_boot_cpus(void)
 {
@@ -235,25 +232,6 @@ void __init smp4d_smp_done(void)
 	*prev = first;
 	local_flush_cache_all();
 
-	/* Free unneeded trap tables */
-	ClearPageReserved(virt_to_page(trapbase_cpu1));
-	init_page_count(virt_to_page(trapbase_cpu1));
-	free_page((unsigned long)trapbase_cpu1);
-	totalram_pages++;
-	num_physpages++;
-
-	ClearPageReserved(virt_to_page(trapbase_cpu2));
-	init_page_count(virt_to_page(trapbase_cpu2));
-	free_page((unsigned long)trapbase_cpu2);
-	totalram_pages++;
-	num_physpages++;
-
-	ClearPageReserved(virt_to_page(trapbase_cpu3));
-	init_page_count(virt_to_page(trapbase_cpu3));
-	free_page((unsigned long)trapbase_cpu3);
-	totalram_pages++;
-	num_physpages++;
-
 	/* Ok, they are spinning and ready to go. */
 	smp_processors_ready = 1;
 	sun4d_distribute_irqs();
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 960b113d000..762d6eedd94 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -121,9 +121,6 @@ void __cpuinit smp4m_callin(void)
  */
  
 extern struct linux_prom_registers smp_penguin_ctable;
-extern unsigned long trapbase_cpu1[];
-extern unsigned long trapbase_cpu2[];
-extern unsigned long trapbase_cpu3[];
 
 void __init smp4m_boot_cpus(void)
 {
@@ -193,29 +190,6 @@ void __init smp4m_smp_done(void)
 	*prev = first;
 	local_flush_cache_all();
 
-	/* Free unneeded trap tables */
-	if (!cpu_isset(1, cpu_present_map)) {
-		ClearPageReserved(virt_to_page(trapbase_cpu1));
-		init_page_count(virt_to_page(trapbase_cpu1));
-		free_page((unsigned long)trapbase_cpu1);
-		totalram_pages++;
-		num_physpages++;
-	}
-	if (!cpu_isset(2, cpu_present_map)) {
-		ClearPageReserved(virt_to_page(trapbase_cpu2));
-		init_page_count(virt_to_page(trapbase_cpu2));
-		free_page((unsigned long)trapbase_cpu2);
-		totalram_pages++;
-		num_physpages++;
-	}
-	if (!cpu_isset(3, cpu_present_map)) {
-		ClearPageReserved(virt_to_page(trapbase_cpu3));
-		init_page_count(virt_to_page(trapbase_cpu3));
-		free_page((unsigned long)trapbase_cpu3);
-		totalram_pages++;
-		num_physpages++;
-	}
-
 	/* Ok, they are spinning and ready to go. */
 }
 
-- 
cgit v1.2.3


From 2193aa276e2579d9c781c5269521d43f47da9959 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 18 Aug 2009 23:46:12 -0700
Subject: sparc32: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/configs/sparc32_defconfig | 74 +++++++++++++++++++++---------------
 1 file changed, 44 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 8bcd27af724..a0f62a808ed 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Fri Apr 17 04:04:46 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:45:52 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -17,6 +17,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -74,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -87,8 +87,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -97,6 +102,10 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,9 +163,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_SUN_PM=y
 # CONFIG_SPARC_LED is not set
 CONFIG_SERIAL_CONSOLE=y
@@ -264,6 +273,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -281,7 +291,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -335,6 +349,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -358,10 +373,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -379,6 +390,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -387,6 +399,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -401,7 +414,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -426,13 +438,16 @@ CONFIG_SCSI_SUNESP=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -463,6 +478,7 @@ CONFIG_SUNQE=m
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -482,6 +498,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -629,6 +646,11 @@ CONFIG_HW_RANDOM=m
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -668,22 +690,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -776,6 +783,10 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -799,10 +810,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -985,6 +998,7 @@ CONFIG_KGDB=y
 CONFIG_KGDB_SERIAL_CONSOLE=y
 CONFIG_KGDB_TESTS=y
 # CONFIG_KGDB_TESTS_ON_BOOT is not set
+# CONFIG_KMEMCHECK is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_STACK_DEBUG is not set
 
-- 
cgit v1.2.3


From 1ca3976d8ca8b0b44145994b1433f759a642615b Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 18 Aug 2009 23:56:21 -0700
Subject: sparc64: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/configs/sparc64_defconfig | 59 +++++++++++++++++++++---------------
 1 file changed, 34 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 0123a4c596c..fdddf7a6f72 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 16 04:59:36 2009
+# Linux kernel version: 2.6.31-rc1
+# Tue Aug 18 23:56:02 2009
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -26,6 +26,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -119,6 +120,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -204,7 +210,6 @@ CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=1
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
@@ -410,6 +415,7 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
@@ -562,6 +568,7 @@ CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=m
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
@@ -573,7 +580,11 @@ CONFIG_DM_ZERO=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -667,6 +678,7 @@ CONFIG_E1000E=m
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -773,6 +785,7 @@ CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -870,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
 
@@ -898,13 +912,17 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -959,6 +977,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -994,23 +1013,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1284,7 +1289,6 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
@@ -1296,6 +1300,7 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1374,7 +1379,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1420,6 +1424,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1448,6 +1453,10 @@ CONFIG_RTC_DRV_STARFIRE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1480,11 +1489,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1560,7 +1569,7 @@ CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
 # CONFIG_NLS_CODEPAGE_737 is not set
-- 
cgit v1.2.3


From e055d41ff5e9761c5572a6f4ce94bcd82bfbb28f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 19 Aug 2009 17:57:01 +0900
Subject: sh: Build fix for disabled caches.

This fixes up the build when caches are disabled, by linking in all of
the cache routines directly. This paves the way for splitting out
separate I and D cache disabling, similar to what sh64 had, and which
we want for SH-X3 anyways.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Makefile | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 4ca71e9e09e..3759bf85329 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -4,14 +4,12 @@
 
 obj-y			:= cache.o init.o consistent.o mmap.o
 
-ifndef CONFIG_CACHE_OFF
 cacheops-$(CONFIG_CPU_SH2)		:= cache-sh2.o
 cacheops-$(CONFIG_CPU_SH2A)		:= cache-sh2a.o
 cacheops-$(CONFIG_CPU_SH3)		:= cache-sh3.o
 cacheops-$(CONFIG_CPU_SH4)		:= cache-sh4.o flush-sh4.o
 cacheops-$(CONFIG_CPU_SH5)		:= cache-sh5.o flush-sh4.o
 cacheops-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
-endif
 
 obj-y			+= $(cacheops-y)
 
-- 
cgit v1.2.3


From fc6191dd301e3bc8cbb142aab1a2ec4e699cb2de Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 19 Aug 2009 17:53:04 +0900
Subject: sh: Fix up clockevents broadcasting.

This fixes up the clockevents broadcasting code as detailed in commit
ee348d5a1d810bc9958cabb7c27302aab235d36e ("[ARM] realview: fix broadcast
tick support"). This saves us from having to do strange ordering things
with the broadcast clockevent device, relying on the rating instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/smp-shx3.c | 2 ++
 arch/sh/kernel/localtimer.c        | 9 +++++++--
 arch/sh/kernel/time.c              | 4 ----
 3 files changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 2b6b0d50c57..185ec3976a2 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -57,6 +57,8 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
+	local_timer_setup(0);
+
 	BUILD_BUG_ON(SMP_MSG_NR >= 8);
 
 	for (i = 0; i < SMP_MSG_NR; i++)
diff --git a/arch/sh/kernel/localtimer.c b/arch/sh/kernel/localtimer.c
index 96e8eaea1e6..0b04e7d4a9b 100644
--- a/arch/sh/kernel/localtimer.c
+++ b/arch/sh/kernel/localtimer.c
@@ -22,6 +22,7 @@
 #include <linux/jiffies.h>
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
+#include <linux/hardirq.h>
 #include <linux/irq.h>
 
 static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
@@ -33,7 +34,9 @@ void local_timer_interrupt(void)
 {
 	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
 
+	irq_enter();
 	clk->event_handler(clk);
+	irq_exit();
 }
 
 static void dummy_timer_set_mode(enum clock_event_mode mode,
@@ -46,8 +49,10 @@ void __cpuinit local_timer_setup(unsigned int cpu)
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
 	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 200;
+	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DUMMY;
+	clk->rating		= 400;
 	clk->mult		= 1;
 	clk->set_mode		= dummy_timer_set_mode;
 	clk->broadcast		= smp_timer_broadcast;
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 7f95f479060..632aff53328 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -119,9 +119,5 @@ void __init time_init(void)
 	set_normalized_timespec(&wall_to_monotonic,
 				-xtime.tv_sec, -xtime.tv_nsec);
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	local_timer_setup(smp_processor_id());
-#endif
-
 	late_time_init = sh_late_time_init;
 }
-- 
cgit v1.2.3


From 1bc265d06c31d08a3d95b6b8215c7639698001e0 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 19 Aug 2009 00:12:15 +0000
Subject: sh: USB0 resource area fix for ms7724se

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9162081504e..c04e134474d 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -319,7 +319,7 @@ static struct r8a66597_platdata sh7724_usb0_host_data = {
 static struct resource sh7724_usb0_host_resources[] = {
 	[0] = {
 		.start	= 0xa4d80000,
-		.end	= 0xa4d800ff,
+		.end	= 0xa4d80124 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-- 
cgit v1.2.3


From 24d76195d124986b7702821b8b6cc85942b13146 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 19 Aug 2009 10:24:15 +0000
Subject: sh: Add SH7724 support to NR_ONCHIP_DMA_CHANNELS

This patch also update help comment

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/dma/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 63e9dd30b41..b91fa8dbf04 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -27,12 +27,12 @@ config NR_ONCHIP_DMA_CHANNELS
 	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
 		       CPU_SUBTYPE_SH7760
 	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780  || \
-			CPU_SUBTYPE_SH7785
+			CPU_SUBTYPE_SH7785 || CPU_SUBTYPE_SH7724
 	default "6"
 	help
 	  This allows you to specify the number of channels that the on-chip
-	  DMAC supports. This will be 4 for SH7091/SH7750/SH7751 and 8 for the
-	  SH7750R/SH7751R.
+	  DMAC supports. This will be 4 for SH7750/SH7751/Sh7750S/SH7091 and 8 for the
+	  SH7750R/SH7751R/SH7760, 12 for the SH7723/SH7780/SH7785/SH7724, default is 6.
 
 config NR_DMA_CHANNELS_BOOL
 	depends on SH_DMA
-- 
cgit v1.2.3


From 5e9ad7df9fd056f1071af8aa91034a1c3170257d Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 18 Aug 2009 10:41:57 +0200
Subject: [S390] ftrace: update system call tracer support

Commit fb34a08c3 ("tracing: Add trace events for each syscall
entry/exit") changed the lowlevel API to ftrace syscall tracing
but did not update s390 which started making use of it recently.

This broke the s390 build, as reported by Paul Mundt.

Update the callbacks with the syscall number and the syscall
return code values. This allows per syscall tracepoints,
syscall argument enumeration /debug/tracing/events/syscalls/
and perfcounters support and integration on s390 too.

Reported-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <tip-fb34a08c3469b2be9eae626ccb96476b4687b810@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/s390/kernel/ptrace.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 43acd73105b..c5e87d891ca 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -51,6 +51,9 @@
 #include "compat_ptrace.h"
 #endif
 
+DEFINE_TRACE(syscall_enter);
+DEFINE_TRACE(syscall_exit);
+
 enum s390_regset {
 	REGSET_GENERAL,
 	REGSET_FP,
@@ -662,7 +665,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 	}
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
-		ftrace_syscall_enter(regs);
+		trace_syscall_enter(regs, regs->gprs[2]);
 
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(is_compat_task() ?
@@ -680,7 +683,7 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
 				   regs->gprs[2]);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
-		ftrace_syscall_exit(regs);
+		trace_syscall_exit(regs, regs->gprs[2]);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
-- 
cgit v1.2.3


From f833bab87fca5c3ce13778421b1365845843b976 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Mon, 17 Aug 2009 14:34:59 -0700
Subject: clockevent: Prevent dead lock on clockevents_lock

Currently clockevents_notify() is called with interrupts enabled at
some places and interrupts disabled at some other places.

This results in a deadlock in this scenario.

cpu A holds clockevents_lock in clockevents_notify() with irqs enabled
cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled
cpu C doing set_mtrr() which will try to rendezvous of all the cpus.

This will result in C and A come to the rendezvous point and waiting
for B. B is stuck forever waiting for the spinlock and thus not
reaching the rendezvous point.

Fix the clockevents code so that clockevents_lock is taken with
interrupts disabled and thus avoid the above deadlock.

Also call lapic_timer_propagate_broadcast() on the destination cpu so
that we avoid calling smp_call_function() in the clockevents notifier
chain.

This issue left us wondering if we need to change the MTRR rendezvous
logic to use stop machine logic (instead of smp_call_function) or add
a check in spinlock debug code to see if there are other spinlocks
which gets taken under both interrupts enabled/disabled conditions.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: "Brown Len" <len.brown@intel.com>
LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/process.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 994dd6a4a2a..071166a4ba8 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -519,16 +519,12 @@ static void c1e_idle(void)
 		if (!cpumask_test_cpu(cpu, c1e_mask)) {
 			cpumask_set_cpu(cpu, c1e_mask);
 			/*
-			 * Force broadcast so ACPI can not interfere. Needs
-			 * to run with interrupts enabled as it uses
-			 * smp_function_call.
+			 * Force broadcast so ACPI can not interfere.
 			 */
-			local_irq_enable();
 			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
 					   &cpu);
 			printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
 			       cpu);
-			local_irq_disable();
 		}
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 
-- 
cgit v1.2.3


From 5416c2663517ebd0be0664c4d4ce3df0b116c059 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 17 Aug 2009 12:25:41 -0700
Subject: x86: make sure load_percpu_segment has no stackprotector

load_percpu_segment() is used to set up the per-cpu segment registers,
which are also used for -fstack-protector.  Make sure that the
load_percpu_segment() function doesn't have stackprotector enabled.

[ Impact: allow percpu setup before calling stack-protected functions ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/cpu/Makefile | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 4e242f9a06e..8b5b9b625ed 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -7,6 +7,10 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_common.o = -pg
 endif
 
+# Make sure load_percpu_segment has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_common.o		:= $(nostackp)
+
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
 obj-y			+= vmware.o hypervisor.o
-- 
cgit v1.2.3


From ce2eef33d35cd7b932492b5a81fb0febd2b323cd Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 17 Aug 2009 12:26:53 -0700
Subject: xen: rearrange things to fix stackprotector

Make sure the stack-protector segment registers are properly set up
before calling any functions which may have stack-protection compiled
into them.

[ Impact: prevent Xen early-boot crash when stack-protector is enabled ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/Makefile    |  4 ++++
 arch/x86/xen/enlighten.c | 22 ++++++++++------------
 2 files changed, 14 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 3b767d03fd6..a5b9288b7da 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -5,6 +5,10 @@ CFLAGS_REMOVE_time.o = -pg
 CFLAGS_REMOVE_irq.o = -pg
 endif
 
+# Make sure early boot has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_enlighten.o		:= $(nostackp)
+
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm.o xen-asm_$(BITS).o \
 			grant-table.o suspend.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index f09e8c36ee8..edcf72a3c29 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -925,10 +925,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_domain_type = XEN_PV_DOMAIN;
 
-	BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
-
-	xen_setup_features();
-
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
 	pv_init_ops = xen_init_ops;
@@ -937,8 +933,15 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
-	xen_init_irq_ops();
+#ifdef CONFIG_X86_64
+	/*
+	 * Setup percpu state.  We only need to do this for 64-bit
+	 * because 32-bit already has %fs set properly.
+	 */
+	load_percpu_segment(0);
+#endif
 
+	xen_init_irq_ops();
 	xen_init_cpuid_mask();
 
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -948,6 +951,8 @@ asmlinkage void __init xen_start_kernel(void)
 	set_xen_basic_apic_ops();
 #endif
 
+	xen_setup_features();
+
 	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
 		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
 		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
@@ -955,13 +960,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_X86_64
-	/*
-	 * Setup percpu state.  We only need to do this for 64-bit
-	 * because 32-bit already has %fs set properly.
-	 */
-	load_percpu_segment(0);
-#endif
 	/*
 	 * The only reliable way to retain the initial address of the
 	 * percpu gdt_page is to remember it here, so we can go and
-- 
cgit v1.2.3


From 66dc3304f3875ea85c630a57a88ecf79032890c4 Mon Sep 17 00:00:00 2001
From: Gerhard Pircher <gerhard_pircher@gmx.net>
Date: Fri, 19 Jun 2009 11:40:57 +0000
Subject: powerpc/amigaone: Convert amigaone_init() to a
 machine_device_initcall()

This allows to remove the ppc_md.init() hook in the setup code.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/amigaone/setup.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c
index 443035366c1..9290a7a442d 100644
--- a/arch/powerpc/platforms/amigaone/setup.c
+++ b/arch/powerpc/platforms/amigaone/setup.c
@@ -110,13 +110,16 @@ void __init amigaone_init_IRQ(void)
 	irq_set_default_host(i8259_get_host());
 }
 
-void __init amigaone_init(void)
+static int __init request_isa_regions(void)
 {
 	request_region(0x00, 0x20, "dma1");
 	request_region(0x40, 0x20, "timer");
 	request_region(0x80, 0x10, "dma page reg");
 	request_region(0xc0, 0x20, "dma2");
+
+	return 0;
 }
+machine_device_initcall(amigaone, request_isa_regions);
 
 void amigaone_restart(char *cmd)
 {
@@ -161,7 +164,6 @@ define_machine(amigaone) {
 	.name			= "AmigaOne",
 	.probe			= amigaone_probe,
 	.setup_arch		= amigaone_setup_arch,
-	.init			= amigaone_init,
 	.show_cpuinfo		= amigaone_show_cpuinfo,
 	.init_IRQ		= amigaone_init_IRQ,
 	.restart		= amigaone_restart,
-- 
cgit v1.2.3


From 11a6b292c1bc9cb39970e44edd6958250f23d3a8 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Sun, 5 Jul 2009 16:08:52 +0000
Subject: powerpc/mpic: Fix MPIC_BROKEN_REGREAD on non broken MPICs

The workaround enabled by CONFIG_MPIC_BROKEN_REGREAD does not work
on non-broken MPICs. The symptom is no interrupts being received.

The fix is twofold. Firstly the code was broken for multiple isus,
we need to index into the shadow array with the src_no, not the idx.
Secondly, we always do the read, but only use the VECPRI_MASK and
VECPRI_ACTIVITY bits from the hardware, the rest of "val" comes
from the shadow.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mpic.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3981ae4cb58..30c44e6b041 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -230,14 +230,16 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne
 {
 	unsigned int	isu = src_no >> mpic->isu_shift;
 	unsigned int	idx = src_no & mpic->isu_mask;
+	unsigned int	val;
 
+	val = _mpic_read(mpic->reg_type, &mpic->isus[isu],
+			 reg + (idx * MPIC_INFO(IRQ_STRIDE)));
 #ifdef CONFIG_MPIC_BROKEN_REGREAD
 	if (reg == 0)
-		return mpic->isu_reg0_shadow[idx];
-	else
+		val = (val & (MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY)) |
+			mpic->isu_reg0_shadow[src_no];
 #endif
-		return _mpic_read(mpic->reg_type, &mpic->isus[isu],
-				  reg + (idx * MPIC_INFO(IRQ_STRIDE)));
+	return val;
 }
 
 static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
@@ -251,7 +253,8 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
 
 #ifdef CONFIG_MPIC_BROKEN_REGREAD
 	if (reg == 0)
-		mpic->isu_reg0_shadow[idx] = value;
+		mpic->isu_reg0_shadow[src_no] =
+			value & ~(MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY);
 #endif
 }
 
-- 
cgit v1.2.3


From 0d2d3e38f72e400f602dade3f0ddffe0b3b9d4df Mon Sep 17 00:00:00 2001
From: Geoff Thorpe <geoff@geoffthorpe.net>
Date: Tue, 7 Jul 2009 15:23:56 +0000
Subject: powerpc: expose the multi-bit ops that underlie single-bit ops.

The bitops.h functions that operate on a single bit in a bitfield are
implemented by operating on the corresponding word location. In all
cases the inner logic is valid if the mask being applied has more than
one bit set, so this patch exposes those inner operations. Indeed,
set_bits() was already available, but it duplicated code from
set_bit() (rather than making the latter a wrapper) - it was also
missing the PPC405_ERR77() workaround and the "volatile" address
qualifier present in other APIs. This corrects that, and exposes the
other multi-bit equivalents.

One advantage of these multi-bit forms is that they allow word-sized
variables to essentially be their own spinlocks, eg. very useful for
state machines where an atomic "flags" variable can obviate the need
for any additional locking.

Signed-off-by: Geoff Thorpe <geoff@geoffthorpe.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/bitops.h | 196 ++++++++++++--------------------------
 1 file changed, 62 insertions(+), 134 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index 897eade3afb..56f2f2ea563 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -56,174 +56,102 @@
 #define BITOP_WORD(nr)		((nr) / BITS_PER_LONG)
 #define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
 
+/* Macro for generating the ***_bits() functions */
+#define DEFINE_BITOP(fn, op, prefix, postfix)	\
+static __inline__ void fn(unsigned long mask,	\
+		volatile unsigned long *_p)	\
+{						\
+	unsigned long old;			\
+	unsigned long *p = (unsigned long *)_p;	\
+	__asm__ __volatile__ (			\
+	prefix					\
+"1:"	PPC_LLARX "%0,0,%3\n"			\
+	stringify_in_c(op) "%0,%0,%2\n"		\
+	PPC405_ERR77(0,%3)			\
+	PPC_STLCX "%0,0,%3\n"			\
+	"bne- 1b\n"				\
+	postfix					\
+	: "=&r" (old), "+m" (*p)		\
+	: "r" (mask), "r" (p)			\
+	: "cc", "memory");			\
+}
+
+DEFINE_BITOP(set_bits, or, "", "")
+DEFINE_BITOP(clear_bits, andc, "", "")
+DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "")
+DEFINE_BITOP(change_bits, xor, "", "")
+
 static __inline__ void set_bit(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# set_bit\n"
-	"or	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
+	set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
 }
 
 static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# clear_bit\n"
-	"andc	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
+	clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
 }
 
 static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3	# clear_bit_unlock\n"
-	"andc	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
+	clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr));
 }
 
 static __inline__ void change_bit(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# change_bit\n"
-	"xor	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
+	change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+}
+
+/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
+ * operands. */
+#define DEFINE_TESTOP(fn, op, prefix, postfix)	\
+static __inline__ unsigned long fn(		\
+		unsigned long mask,		\
+		volatile unsigned long *_p)	\
+{						\
+	unsigned long old, t;			\
+	unsigned long *p = (unsigned long *)_p;	\
+	__asm__ __volatile__ (			\
+	prefix					\
+"1:"	PPC_LLARX "%0,0,%3\n"			\
+	stringify_in_c(op) "%1,%0,%2\n"		\
+	PPC405_ERR77(0,%3)			\
+	PPC_STLCX "%1,0,%3\n"			\
+	"bne- 1b\n"				\
+	postfix					\
+	: "=&r" (old), "=&r" (t)		\
+	: "r" (mask), "r" (p)			\
+	: "cc", "memory");			\
+	return (old & mask);			\
 }
 
+DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit\n"
-	"or	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
+	return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
 }
 
 static __inline__ int test_and_set_bit_lock(unsigned long nr,
 				       volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit_lock\n"
-	"or	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
+	return test_and_set_bits_lock(BITOP_MASK(nr),
+				addr + BITOP_WORD(nr)) != 0;
 }
 
 static __inline__ int test_and_clear_bit(unsigned long nr,
 					 volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_clear_bit\n"
-	"andc	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
+	return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
 }
 
 static __inline__ int test_and_change_bit(unsigned long nr,
 					  volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_change_bit\n"
-	"xor	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
-}
-
-static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
-{
-        unsigned long old;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3         # set_bits\n"
-	"or	%0,%0,%2\n"
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*addr)
-	: "r" (mask), "r" (addr)
-	: "cc");
+	return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>
-- 
cgit v1.2.3


From 30d0b3682887a81f0335b42f20116fd40d743371 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 13 Jul 2009 20:53:51 +0000
Subject: powerpc: Move 64bit VDSO to improve context switch performance

On 64bit applications the VDSO is the only thing in segment 0. Since the VDSO
is position independent we can remove the hint and let get_unmapped_area pick
an area. This will mean the vdso will be near other mmaps and will share
an SLB entry:

10000000-10001000 r-xp 00000000 08:06 5778459        /root/context_switch_64
10010000-10011000 r--p 00000000 08:06 5778459        /root/context_switch_64
10011000-10012000 rw-p 00001000 08:06 5778459        /root/context_switch_64
fffa92ae000-fffa92b0000 rw-p 00000000 00:00 0
fffa92b0000-fffa9453000 r-xp 00000000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa9453000-fffa9462000 ---p 001a3000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa9462000-fffa9466000 r--p 001a2000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa9466000-fffa947c000 rw-p 001a6000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa947c000-fffa9480000 rw-p 00000000 00:00 0
fffa9480000-fffa94a8000 r-xp 00000000 08:06 4333852  /lib64/ld-2.9.so
fffa94b3000-fffa94b4000 rw-p 00000000 00:00 0

fffa94b4000-fffa94b7000 r-xp 00000000 00:00 0        [vdso] <----- here I am

fffa94b7000-fffa94b8000 r--p 00027000 08:06 4333852  /lib64/ld-2.9.so
fffa94b8000-fffa94bb000 rw-p 00028000 08:06 4333852  /lib64/ld-2.9.so
fffa94bb000-fffa94bc000 rw-p 00000000 00:00 0
fffe4c10000-fffe4c25000 rw-p 00000000 00:00 0        [stack]

On a microbenchmark that bounces a token between two 64bit processes over pipes
and calls gettimeofday each iteration (to access the VDSO), our context switch
rate goes from 268k to 277k ctx switches/sec (tested on a 4GHz POWER6).

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/vdso.h | 3 +--
 arch/powerpc/kernel/vdso.c      | 7 ++++++-
 2 files changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
index 26fc449bd98..dc0419b66f1 100644
--- a/arch/powerpc/include/asm/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
@@ -7,9 +7,8 @@
 #define VDSO32_LBASE	0x100000
 #define VDSO64_LBASE	0x100000
 
-/* Default map addresses */
+/* Default map addresses for 32bit vDSO */
 #define VDSO32_MBASE	VDSO32_LBASE
-#define VDSO64_MBASE	VDSO64_LBASE
 
 #define VDSO_VERSION_STRING	LINUX_2.6.15
 
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ad06d5c75b1..a0abce251d0 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -203,7 +203,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	} else {
 		vdso_pagelist = vdso64_pagelist;
 		vdso_pages = vdso64_pages;
-		vdso_base = VDSO64_MBASE;
+		/*
+		 * On 64bit we don't have a preferred map address. This
+		 * allows get_unmapped_area to find an area near other mmaps
+		 * and most likely share a SLB entry.
+		 */
+		vdso_base = 0;
 	}
 #else
 	vdso_pagelist = vdso32_pagelist;
-- 
cgit v1.2.3


From 5eb9bac0406f2beb84b21aac6feb89d33d9f3f5c Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 13 Jul 2009 20:53:52 +0000
Subject: powerpc: Rearrange SLB preload code

With the new top down layout it is likely that the pc and stack will be in the
same segment, because the pc is most likely in a library allocated via a top
down mmap. Right now we bail out early if these segments match.

Rearrange the SLB preload code to sanity check all SLB preload addresses
are not in the kernel, then check all addresses for conflicts.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/slb.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 5b7038f248b..227056c21ee 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -218,23 +218,18 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	else
 		unmapped_base = TASK_UNMAPPED_BASE_USER64;
 
-	if (is_kernel_addr(pc))
-		return;
-	slb_allocate(pc);
-
-	if (esids_match(pc,stack))
+	if (is_kernel_addr(pc) || is_kernel_addr(stack) ||
+	    is_kernel_addr(unmapped_base))
 		return;
 
-	if (is_kernel_addr(stack))
-		return;
-	slb_allocate(stack);
+	slb_allocate(pc);
 
-	if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base))
-		return;
+	if (!esids_match(pc, stack))
+		slb_allocate(stack);
 
-	if (is_kernel_addr(unmapped_base))
-		return;
-	slb_allocate(unmapped_base);
+	if (!esids_match(pc, unmapped_base) &&
+	    !esids_match(stack, unmapped_base))
+		slb_allocate(unmapped_base);
 }
 
 static inline void patch_slb_encoding(unsigned int *insn_addr,
-- 
cgit v1.2.3


From de4376c2846bb5a8fc6fe8dbd0e4ff30905493e6 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 13 Jul 2009 20:53:53 +0000
Subject: powerpc: Preload application text segment instead of
 TASK_UNMAPPED_BASE

TASK_UNMAPPED_BASE is not used with the new top down mmap layout. We can
reuse this preload slot by loading in the segment at 0x10000000, where almost
all PowerPC binaries are linked at.

On a microbenchmark that bounces a token between two 64bit processes over pipes
and calls gettimeofday each iteration (to access the VDSO), both the 32bit and
64bit context switch rate improves (tested on a 4GHz POWER6):

32bit: 273k/sec -> 283k/sec
64bit: 277k/sec -> 284k/sec

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/slb.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 227056c21ee..6bc8b4aeba5 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -184,7 +184,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	unsigned long slbie_data = 0;
 	unsigned long pc = KSTK_EIP(tsk);
 	unsigned long stack = KSTK_ESP(tsk);
-	unsigned long unmapped_base;
+	unsigned long exec_base;
 
 	if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
 	    offset <= SLB_CACHE_ENTRIES) {
@@ -212,14 +212,13 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 
 	/*
 	 * preload some userspace segments into the SLB.
+	 * Almost all 32 and 64bit PowerPC executables are linked at
+	 * 0x10000000 so it makes sense to preload this segment.
 	 */
-	if (test_tsk_thread_flag(tsk, TIF_32BIT))
-		unmapped_base = TASK_UNMAPPED_BASE_USER32;
-	else
-		unmapped_base = TASK_UNMAPPED_BASE_USER64;
+	exec_base = 0x10000000;
 
 	if (is_kernel_addr(pc) || is_kernel_addr(stack) ||
-	    is_kernel_addr(unmapped_base))
+	    is_kernel_addr(exec_base))
 		return;
 
 	slb_allocate(pc);
@@ -227,9 +226,9 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	if (!esids_match(pc, stack))
 		slb_allocate(stack);
 
-	if (!esids_match(pc, unmapped_base) &&
-	    !esids_match(stack, unmapped_base))
-		slb_allocate(unmapped_base);
+	if (!esids_match(pc, exec_base) &&
+	    !esids_match(stack, exec_base))
+		slb_allocate(exec_base);
 }
 
 static inline void patch_slb_encoding(unsigned int *insn_addr,
-- 
cgit v1.2.3


From 8aa34ab8b2dc96ca6c4feecfb87ed13f0d40ef98 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:52:52 +0000
Subject: powerpc: Rename exception.h to exception-64s.h

The file include/asm/exception.h contains definitions
that are specific to exception handling on 64-bit server
type processors.

This renames the file to exception-64s.h to reflect that
fact and avoid confusion.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64s.h   | 279 +++++++++++++++++++++++++++++
 arch/powerpc/include/asm/exception.h       | 279 -----------------------------
 arch/powerpc/kernel/exceptions-64s.S       |   2 +
 arch/powerpc/kernel/head_64.S              |   1 -
 arch/powerpc/platforms/iseries/exception.h |   2 +-
 5 files changed, 282 insertions(+), 281 deletions(-)
 create mode 100644 arch/powerpc/include/asm/exception-64s.h
 delete mode 100644 arch/powerpc/include/asm/exception.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
new file mode 100644
index 00000000000..d3d4534e3c7
--- /dev/null
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -0,0 +1,279 @@
+#ifndef _ASM_POWERPC_EXCEPTION_H
+#define _ASM_POWERPC_EXCEPTION_H
+/*
+ * Extracted from head_64.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+/*
+ * The following macros define the code that appears as
+ * the prologue to each of the exception handlers.  They
+ * are split into two parts to allow a single kernel binary
+ * to be used for pSeries and iSeries.
+ *
+ * We make as much of the exception code common between native
+ * exception handlers (including pSeries LPAR) and iSeries LPAR
+ * implementations as possible.
+ */
+
+#define EX_R9		0
+#define EX_R10		8
+#define EX_R11		16
+#define EX_R12		24
+#define EX_R13		32
+#define EX_SRR0		40
+#define EX_DAR		48
+#define EX_DSISR	56
+#define EX_CCR		60
+#define EX_R3		64
+#define EX_LR		72
+
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
+ * low halfword of the address, but for Kdump we need the whole low
+ * word.
+ */
+#define LOAD_HANDLER(reg, label)					\
+	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
+
+#define EXCEPTION_PROLOG_1(area)				\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
+	std	r10,area+EX_R10(r13);					\
+	std	r11,area+EX_R11(r13);					\
+	std	r12,area+EX_R12(r13);					\
+	mfspr	r9,SPRN_SPRG1;						\
+	std	r9,area+EX_R13(r13);					\
+	mfcr	r9
+
+#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+	EXCEPTION_PROLOG_1(area);					\
+	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
+	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address.  We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area)				   \
+	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
+	mr	r10,r1;			/* Save r1			*/ \
+	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
+	beq-	1f;							   \
+	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
+1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
+	bge-	cr1,2f;			/* abort if it is		*/ \
+	b	3f;							   \
+2:	li	r1,(n);			/* will be reloaded later	*/ \
+	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	b	bad_stack;						   \
+3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
+	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
+	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
+	std	r10,0(r1);		/* make stack chain pointer	*/ \
+	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
+	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
+	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
+	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
+	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
+	ld	r10,area+EX_R10(r13);					   \
+	std	r9,GPR9(r1);						   \
+	std	r10,GPR10(r1);						   \
+	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
+	ld	r10,area+EX_R12(r13);					   \
+	ld	r11,area+EX_R13(r13);					   \
+	std	r9,GPR11(r1);						   \
+	std	r10,GPR12(r1);						   \
+	std	r11,GPR13(r1);						   \
+	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
+	mflr	r9;			/* save LR in stackframe	*/ \
+	std	r9,_LINK(r1);						   \
+	mfctr	r10;			/* save CTR in stackframe	*/ \
+	std	r10,_CTR(r1);						   \
+	lbz	r10,PACASOFTIRQEN(r13);				   \
+	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
+	std	r10,SOFTE(r1);						   \
+	std	r11,_XER(r1);						   \
+	li	r9,(n)+1;						   \
+	std	r9,_TRAP(r1);		/* set trap number		*/ \
+	li	r10,0;							   \
+	ld	r11,exception_marker@toc(r2);				   \
+	std	r10,RESULT(r1);		/* clear regs->result		*/ \
+	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
+
+/*
+ * Exception vectors.
+ */
+#define STD_EXCEPTION_PSERIES(n, label)			\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+#define HSTD_EXCEPTION_PSERIES(n, label)		\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR0,r20;				\
+	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR1,r20;				\
+	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+
+#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
+	. = n;								\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	HMT_MEDIUM;							\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
+	std	r10,PACA_EXGEN+EX_R10(r13);				\
+	lbz	r10,PACASOFTIRQEN(r13);					\
+	mfcr	r9;							\
+	cmpwi	r10,0;							\
+	beq	masked_interrupt;					\
+	mfspr	r10,SPRN_SPRG1;						\
+	std	r10,PACA_EXGEN+EX_R13(r13);				\
+	std	r11,PACA_EXGEN+EX_R11(r13);				\
+	std	r12,PACA_EXGEN+EX_R12(r13);				\
+	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
+	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label##_common)				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#ifdef CONFIG_PPC_ISERIES
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+BEGIN_FW_FTR_SECTION;				\
+	stb	r11,PACAHARDIRQEN(r13);		\
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
+	TRACE_DISABLE_INTS;			\
+BEGIN_FW_FTR_SECTION;				\
+	mfmsr	r10;				\
+	ori	r10,r10,MSR_EE;			\
+	mtmsrd	r10,1;				\
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#else
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+	stb	r11,PACAHARDIRQEN(r13);		\
+	TRACE_DISABLE_INTS
+#endif /* CONFIG_PPC_ISERIES */
+
+#define ENABLE_INTS				\
+	ld	r12,_MSR(r1);			\
+	mfmsr	r11;				\
+	rlwimi	r11,r12,0,MSR_EE;		\
+	mtmsrd	r11,1
+
+#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+BEGIN_FTR_SECTION					\
+	bl	.ppc64_runlatch_on;			\
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except_lite
+
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP				\
+BEGIN_FTR_SECTION				\
+	clrrdi	r11,r1,THREAD_SHIFT;		\
+	ld	r9,TI_LOCAL_FLAGS(r11);		\
+	andi.	r10,r9,_TLF_NAPPING;		\
+	bnel	power4_fixup_nap;		\
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h
deleted file mode 100644
index d3d4534e3c7..00000000000
--- a/arch/powerpc/include/asm/exception.h
+++ /dev/null
@@ -1,279 +0,0 @@
-#ifndef _ASM_POWERPC_EXCEPTION_H
-#define _ASM_POWERPC_EXCEPTION_H
-/*
- * Extracted from head_64.S
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
- *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
- *
- *  This file contains the low-level support and setup for the
- *  PowerPC-64 platform, including trap and interrupt dispatch.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-/*
- * The following macros define the code that appears as
- * the prologue to each of the exception handlers.  They
- * are split into two parts to allow a single kernel binary
- * to be used for pSeries and iSeries.
- *
- * We make as much of the exception code common between native
- * exception handlers (including pSeries LPAR) and iSeries LPAR
- * implementations as possible.
- */
-
-#define EX_R9		0
-#define EX_R10		8
-#define EX_R11		16
-#define EX_R12		24
-#define EX_R13		32
-#define EX_SRR0		40
-#define EX_DAR		48
-#define EX_DSISR	56
-#define EX_CCR		60
-#define EX_R3		64
-#define EX_LR		72
-
-/*
- * We're short on space and time in the exception prolog, so we can't
- * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
- * low halfword of the address, but for Kdump we need the whole low
- * word.
- */
-#define LOAD_HANDLER(reg, label)					\
-	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
-
-#define EXCEPTION_PROLOG_1(area)				\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
-	std	r10,area+EX_R10(r13);					\
-	std	r11,area+EX_R11(r13);					\
-	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
-	std	r9,area+EX_R13(r13);					\
-	mfcr	r9
-
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
-	EXCEPTION_PROLOG_1(area);					\
-	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
-	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label)						\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-/*
- * The common exception prolog is used for all except a few exceptions
- * such as a segment miss on a kernel address.  We have to be prepared
- * to take another exception from the point where we first touch the
- * kernel stack onwards.
- *
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
- */
-#define EXCEPTION_PROLOG_COMMON(n, area)				   \
-	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
-	mr	r10,r1;			/* Save r1			*/ \
-	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
-	beq-	1f;							   \
-	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
-1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,2f;			/* abort if it is		*/ \
-	b	3f;							   \
-2:	li	r1,(n);			/* will be reloaded later	*/ \
-	sth	r1,PACA_TRAP_SAVE(r13);					   \
-	b	bad_stack;						   \
-3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
-	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
-	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
-	std	r10,0(r1);		/* make stack chain pointer	*/ \
-	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
-	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
-	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
-	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
-	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
-	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
-	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
-	ld	r10,area+EX_R10(r13);					   \
-	std	r9,GPR9(r1);						   \
-	std	r10,GPR10(r1);						   \
-	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
-	ld	r10,area+EX_R12(r13);					   \
-	ld	r11,area+EX_R13(r13);					   \
-	std	r9,GPR11(r1);						   \
-	std	r10,GPR12(r1);						   \
-	std	r11,GPR13(r1);						   \
-	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
-	mflr	r9;			/* save LR in stackframe	*/ \
-	std	r9,_LINK(r1);						   \
-	mfctr	r10;			/* save CTR in stackframe	*/ \
-	std	r10,_CTR(r1);						   \
-	lbz	r10,PACASOFTIRQEN(r13);				   \
-	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
-	std	r10,SOFTE(r1);						   \
-	std	r11,_XER(r1);						   \
-	li	r9,(n)+1;						   \
-	std	r9,_TRAP(r1);		/* set trap number		*/ \
-	li	r10,0;							   \
-	ld	r11,exception_marker@toc(r2);				   \
-	std	r10,RESULT(r1);		/* clear regs->result		*/ \
-	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
-
-/*
- * Exception vectors.
- */
-#define STD_EXCEPTION_PSERIES(n, label)			\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-#define HSTD_EXCEPTION_PSERIES(n, label)		\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
-	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR0,r20;				\
-	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
-	. = n;								\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
-	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
-	std	r10,PACA_EXGEN+EX_R10(r13);				\
-	lbz	r10,PACASOFTIRQEN(r13);					\
-	mfcr	r9;							\
-	cmpwi	r10,0;							\
-	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG1;						\
-	std	r10,PACA_EXGEN+EX_R13(r13);				\
-	std	r11,PACA_EXGEN+EX_R11(r13);				\
-	std	r12,PACA_EXGEN+EX_R12(r13);				\
-	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
-	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label##_common)				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-#ifdef CONFIG_PPC_ISERIES
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-BEGIN_FW_FTR_SECTION;				\
-	stb	r11,PACAHARDIRQEN(r13);		\
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
-	TRACE_DISABLE_INTS;			\
-BEGIN_FW_FTR_SECTION;				\
-	mfmsr	r10;				\
-	ori	r10,r10,MSR_EE;			\
-	mtmsrd	r10,1;				\
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#else
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-	stb	r11,PACAHARDIRQEN(r13);		\
-	TRACE_DISABLE_INTS
-#endif /* CONFIG_PPC_ISERIES */
-
-#define ENABLE_INTS				\
-	ld	r12,_MSR(r1);			\
-	mfmsr	r11;				\
-	rlwimi	r11,r12,0,MSR_EE;		\
-	mtmsrd	r11,1
-
-#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-/*
- * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
- * in the idle task and therefore need the special idle handling.
- */
-#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-BEGIN_FTR_SECTION					\
-	bl	.ppc64_runlatch_on;			\
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except_lite
-
-/*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP				\
-BEGIN_FTR_SECTION				\
-	clrrdi	r11,r1,THREAD_SHIFT;		\
-	ld	r9,TI_LOCAL_FLAGS(r11);		\
-	andi.	r10,r9,_TLF_NAPPING;		\
-	bnel	power4_fixup_nap;		\
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
-#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eb898112e57..72644cf22ca 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -12,6 +12,8 @@
  *
  */
 
+#include <asm/exception-64s.h>
+
 /*
  * We layout physical memory as follows:
  * 0x0000 - 0x00ff : Secondary processor spin code
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 012505ebd9f..9196ef36d43 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -36,7 +36,6 @@
 #include <asm/thread_info.h>
 #include <asm/firmware.h>
 #include <asm/page_64.h>
-#include <asm/exception.h>
 #include <asm/irqflags.h>
 
 /* The physical memory is layed out such that the secondary processor
diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h
index ced45a8fa1a..e26eb86ac73 100644
--- a/arch/powerpc/platforms/iseries/exception.h
+++ b/arch/powerpc/platforms/iseries/exception.h
@@ -24,7 +24,7 @@
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
-#include <asm/exception.h>
+#include <asm/exception-64s.h>
 
 #define EXCEPTION_PROLOG_ISERIES_1					\
 	mfmsr	r10;							\
-- 
cgit v1.2.3


From ee43eb788b3a06425fffb912677e2e1c8b00dd3b Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:52:54 +0000
Subject: powerpc: Use names rather than numbers for SPRGs (v2)

The kernel uses SPRG registers for various purposes, typically in
low level assembly code as scratch registers or to hold per-cpu
global infos such as the PACA or the current thread_info pointer.

We want to be able to easily shuffle the usage of those registers
as some implementations have specific constraints realted to some
of them, for example, some have userspace readable aliases, etc..
and the current choice isn't always the best.

This patch should not change any code generation, and replaces the
usage of SPRN_SPRGn everywhere in the kernel with a named replacement
and adds documentation next to the definition of the names as to
what those are used for on each processor family.

The only parts that still use the original numbers are bits of KVM
or suspend/resume code that just blindly needs to save/restore all
the SPRGs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64s.h   |  18 ++---
 arch/powerpc/include/asm/reg.h             | 113 ++++++++++++++++++++++++++
 arch/powerpc/kernel/cpu_setup_6xx.S        |   2 +-
 arch/powerpc/kernel/entry_32.S             |  20 ++---
 arch/powerpc/kernel/entry_64.S             |   4 +-
 arch/powerpc/kernel/exceptions-64s.S       |  44 ++++------
 arch/powerpc/kernel/fpu.S                  |   2 +-
 arch/powerpc/kernel/head_32.S              |  40 +++++-----
 arch/powerpc/kernel/head_40x.S             | 124 ++++++++++++++---------------
 arch/powerpc/kernel/head_44x.S             |  56 ++++++-------
 arch/powerpc/kernel/head_64.S              |  14 ++--
 arch/powerpc/kernel/head_8xx.S             |  13 +--
 arch/powerpc/kernel/head_booke.h           |  50 +++++-------
 arch/powerpc/kernel/head_fsl_booke.S       |  60 +++++++-------
 arch/powerpc/kernel/setup_64.c             |   4 +-
 arch/powerpc/kernel/vector.S               |   2 +-
 arch/powerpc/kvm/booke_interrupts.S        |  18 ++---
 arch/powerpc/mm/hash_low_32.S              |   4 +-
 arch/powerpc/platforms/iseries/exception.S |  28 +++----
 arch/powerpc/platforms/iseries/exception.h |   4 +-
 20 files changed, 356 insertions(+), 264 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index d3d4534e3c7..773e380b5fe 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -57,12 +57,12 @@
 	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
 
 #define EXCEPTION_PROLOG_1(area)				\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
+	mfspr	r9,SPRN_SPRG_SCRATCH0;					\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
@@ -144,7 +144,7 @@
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
 #define HSTD_EXCEPTION_PSERIES(n, label)		\
@@ -152,13 +152,13 @@ label##_pSeries:					\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mtspr	SPRN_SPRG_SCRATCH0,r20;	/* save r20 */	\
 	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
 	mtspr	SPRN_SRR0,r20;				\
 	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
 	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	mfspr	r20,SPRN_SPRG_SCRATCH0;	/* restore r20 */ \
+	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
 
@@ -167,15 +167,15 @@ label##_pSeries:					\
 	.globl label##_pSeries;						\
 label##_pSeries:							\
 	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
+	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
 	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
 	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	mfcr	r9;							\
 	cmpwi	r10,0;							\
 	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG1;						\
+	mfspr	r10,SPRN_SPRG_SCRATCH0;					\
 	std	r10,PACA_EXGEN+EX_R13(r13);				\
 	std	r11,PACA_EXGEN+EX_R11(r13);				\
 	std	r12,PACA_EXGEN+EX_R12(r13);				\
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 1170267736d..a8179cc99ac 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -645,6 +645,119 @@
 #define MMCR0_PMC2_LOADMISSTIME	0x5
 #endif
 
+/*
+ * SPRG usage:
+ *
+ * All 64-bit:
+ *	- SPRG3 stores PACA pointer
+ *
+ * 64-bit server:
+ *	- SPRG0 unused (reserved for HV on Power4)
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 scratch for exception vectors
+ *
+ * All 32-bit:
+ *	- SPRG3 current thread_info pointer
+ *        (virtual on BookE, physical on others)
+ *
+ * 32-bit classic:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 indicator that we are in RTAS
+ *	- SPRG4 (603 only) pseudo TLB LRU data
+ *
+ * 32-bit 40x:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 scratch for exception vectors
+ *	- SPRG4 scratch for exception vectors (not 403)
+ *	- SPRG5 scratch for exception vectors (not 403)
+ *	- SPRG6 scratch for exception vectors (not 403)
+ *	- SPRG7 scratch for exception vectors (not 403)
+ *
+ * 32-bit 440 and FSL BookE:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors (*)
+ *	- SPRG2 scratch for crit interrupts handler
+ *	- SPRG4 scratch for exception vectors
+ *	- SPRG5 scratch for exception vectors
+ *	- SPRG6 scratch for machine check handler
+ *	- SPRG7 scratch for exception vectors
+ *	- SPRG9 scratch for debug vectors (e500 only)
+ *
+ *      Additionally, BookE separates "read" and "write"
+ *      of those registers. That allows to use the userspace
+ *      readable variant for reads, which can avoid a fault
+ *      with KVM type virtualization.
+ *
+ *      (*) Under KVM, the host SPRG1 is used to point to
+ *      the current VCPU data structure
+ *
+ * 32-bit 8xx:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 apparently unused but initialized
+ *
+ */
+#ifdef CONFIG_PPC64
+#define SPRN_SPRG_PACA 		SPRN_SPRG3
+#else
+#define SPRN_SPRG_THREAD 	SPRN_SPRG3
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG2
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_32
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_RTAS		SPRN_SPRG2
+#define SPRN_SPRG_603_LRU	SPRN_SPRG4
+#endif
+
+#ifdef CONFIG_40x
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH2	SPRN_SPRG2
+#define SPRN_SPRG_SCRATCH3	SPRN_SPRG4
+#define SPRN_SPRG_SCRATCH4	SPRN_SPRG5
+#define SPRN_SPRG_SCRATCH5	SPRN_SPRG6
+#define SPRN_SPRG_SCRATCH6	SPRN_SPRG7
+#endif
+
+#ifdef CONFIG_BOOKE
+#define SPRN_SPRG_RSCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_WSCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_RSCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_WSCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_RSCRATCH_CRIT	SPRN_SPRG2
+#define SPRN_SPRG_WSCRATCH_CRIT	SPRN_SPRG2
+#define SPRN_SPRG_RSCRATCH2	SPRN_SPRG4R
+#define SPRN_SPRG_WSCRATCH2	SPRN_SPRG4W
+#define SPRN_SPRG_RSCRATCH3	SPRN_SPRG5R
+#define SPRN_SPRG_WSCRATCH3	SPRN_SPRG5W
+#define SPRN_SPRG_RSCRATCH_MC	SPRN_SPRG6R
+#define SPRN_SPRG_WSCRATCH_MC	SPRN_SPRG6W
+#define SPRN_SPRG_RSCRATCH4	SPRN_SPRG7R
+#define SPRN_SPRG_WSCRATCH4	SPRN_SPRG7W
+#ifdef CONFIG_E200
+#define SPRN_SPRG_RSCRATCH_DBG	SPRN_SPRG6R
+#define SPRN_SPRG_WSCRATCH_DBG	SPRN_SPRG6W
+#else
+#define SPRN_SPRG_RSCRATCH_DBG	SPRN_SPRG9
+#define SPRN_SPRG_WSCRATCH_DBG	SPRN_SPRG9
+#endif
+#define SPRN_SPRG_RVCPU		SPRN_SPRG1
+#define SPRN_SPRG_WVCPU		SPRN_SPRG1
+#endif
+
+#ifdef CONFIG_8xx
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
+#endif
+
 /*
  * An mtfsf instruction with the L bit set. On CPUs that support this a
  * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 1e9949e6885..55cba4a8a95 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -21,7 +21,7 @@ _GLOBAL(__setup_cpu_603)
 	mflr	r4
 BEGIN_MMU_FTR_SECTION
 	li	r10,0
-	mtspr	SPRN_SPRG4,r10		/* init SW LRU tracking */
+	mtspr	SPRN_SPRG_603_LRU,r10		/* init SW LRU tracking */
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
 BEGIN_FTR_SECTION
 	bl	__init_fpu_registers
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3cadba60a4b..1175a8539e6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -88,7 +88,7 @@ crit_transfer_to_handler:
 	mfspr	r0,SPRN_SRR1
 	stw	r0,_SRR1(r11)
 
-	mfspr	r8,SPRN_SPRG3
+	mfspr	r8,SPRN_SPRG_THREAD
 	lwz	r0,KSP_LIMIT(r8)
 	stw	r0,SAVED_KSP_LIMIT(r11)
 	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
@@ -108,7 +108,7 @@ crit_transfer_to_handler:
 	mfspr	r0,SPRN_SRR1
 	stw	r0,crit_srr1@l(0)
 
-	mfspr	r8,SPRN_SPRG3
+	mfspr	r8,SPRN_SPRG_THREAD
 	lwz	r0,KSP_LIMIT(r8)
 	stw	r0,saved_ksp_limit@l(0)
 	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
@@ -138,7 +138,7 @@ transfer_to_handler:
 	mfspr	r2,SPRN_XER
 	stw	r12,_CTR(r11)
 	stw	r2,_XER(r11)
-	mfspr	r12,SPRN_SPRG3
+	mfspr	r12,SPRN_SPRG_THREAD
 	addi	r2,r12,-THREAD
 	tovirt(r2,r2)			/* set r2 to current */
 	beq	2f			/* if from user, fix up THREAD.regs */
@@ -680,7 +680,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE)
 
 	tophys(r0,r4)
 	CLR_TOP32(r0)
-	mtspr	SPRN_SPRG3,r0	/* Update current THREAD phys addr */
+	mtspr	SPRN_SPRG_THREAD,r0	/* Update current THREAD phys addr */
 	lwz	r1,KSP(r4)	/* Load new stack pointer */
 
 	/* save the old current 'last' for return value */
@@ -1057,7 +1057,7 @@ exc_exit_restart_end:
 #ifdef CONFIG_40x
 	.globl	ret_from_crit_exc
 ret_from_crit_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lis	r10,saved_ksp_limit@ha;
 	lwz	r10,saved_ksp_limit@l(r10);
 	tovirt(r9,r9);
@@ -1074,7 +1074,7 @@ ret_from_crit_exc:
 #ifdef CONFIG_BOOKE
 	.globl	ret_from_crit_exc
 ret_from_crit_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
 	RESTORE_xSRR(SRR0,SRR1);
@@ -1083,7 +1083,7 @@ ret_from_crit_exc:
 
 	.globl	ret_from_debug_exc
 ret_from_debug_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
 	lwz	r9,THREAD_INFO-THREAD(r9)
@@ -1097,7 +1097,7 @@ ret_from_debug_exc:
 
 	.globl	ret_from_mcheck_exc
 ret_from_mcheck_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
 	RESTORE_xSRR(SRR0,SRR1);
@@ -1255,7 +1255,7 @@ _GLOBAL(enter_rtas)
 	MTMSRD(r0)		/* don't get trashed */
 	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
 	mtlr	r6
-	mtspr	SPRN_SPRG2,r7
+	mtspr	SPRN_SPRG_RTAS,r7
 	mtspr	SPRN_SRR0,r8
 	mtspr	SPRN_SRR1,r9
 	RFI
@@ -1265,7 +1265,7 @@ _GLOBAL(enter_rtas)
 	FIX_SRR1(r9,r0)
 	addi	r1,r1,INT_FRAME_SIZE
 	li	r0,0
-	mtspr	SPRN_SPRG2,r0
+	mtspr	SPRN_SPRG_RTAS,r0
 	mtspr	SPRN_SRR0,r8
 	mtspr	SPRN_SRR1,r9
 	RFI			/* return to caller */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 43e073477c3..dbf0e311561 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -762,7 +762,7 @@ _GLOBAL(enter_rtas)
 
 _STATIC(rtas_return_loc)
 	/* relocation is off at this point */
-	mfspr	r4,SPRN_SPRG3	        /* Get PACA */
+	mfspr	r4,SPRN_SPRG_PACA	/* Get PACA */
 	clrldi	r4,r4,2			/* convert to realmode address */
 
 	bcl	20,31,$+4
@@ -793,7 +793,7 @@ _STATIC(rtas_restore_regs)
 	REST_8GPRS(14, r1)		/* Restore the non-volatiles */
 	REST_10GPRS(22, r1)		/* ditto */
 
-	mfspr	r13,SPRN_SPRG3
+	mfspr	r13,SPRN_SPRG_PACA
 
 	ld	r4,_CCR(r1)
 	mtcr	r4
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 72644cf22ca..4e9640cc056 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -24,18 +24,6 @@
  * 0x8000 -        : Early init and support code
  */
 
-
-/*
- *   SPRG Usage
- *
- *   Register	Definition
- *
- *   SPRG0	reserved for hypervisor
- *   SPRG1	temp - used to save gpr
- *   SPRG2	temp - used to save gpr
- *   SPRG3	virt addr of paca
- */
-
 /*
  * This is the start of the interrupt handlers for pSeries
  * This code runs with relocation off.
@@ -53,16 +41,16 @@ __start_interrupts:
 	. = 0x200
 _machine_check_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
 	. = 0x300
 	.globl data_access_pSeries
 data_access_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
+	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG2,r12
+	mtspr	SPRN_SPRG_SCRATCH1,r12
 	mfspr	r13,SPRN_DAR
 	mfspr	r12,SPRN_DSISR
 	srdi	r13,r13,60
@@ -71,7 +59,7 @@ BEGIN_FTR_SECTION
 	cmpwi	r13,0x2c
 	beq	do_stab_bolted_pSeries
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
 
@@ -79,8 +67,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	.globl data_access_slb_pSeries
 data_access_slb_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13
+	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_DAR
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -93,7 +81,7 @@ data_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -117,8 +105,8 @@ data_access_slb_pSeries:
 	.globl instruction_access_slb_pSeries
 instruction_access_slb_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13
+	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -131,7 +119,7 @@ instruction_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -161,7 +149,7 @@ BEGIN_FTR_SECTION
 	beq-	1f
 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	mr	r9,r13
-	mfspr	r13,SPRN_SPRG3
+	mfspr	r13,SPRN_SPRG_PACA
 	mfspr	r11,SPRN_SRR0
 	ld	r12,PACAKBASE(r13)
 	ld	r10,PACAKMSR(r13)
@@ -230,14 +218,14 @@ masked_interrupt:
 	rotldi	r10,r10,16
 	mtspr	SPRN_SRR1,r10
 	ld	r10,PACA_EXGEN+EX_R10(r13)
-	mfspr	r13,SPRN_SPRG1
+	mfspr	r13,SPRN_SPRG_SCRATCH0
 	rfid
 	b	.
 
 	.align	7
 do_stab_bolted_pSeries:
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
 
 #ifdef CONFIG_PPC_PSERIES
@@ -248,14 +236,14 @@ do_stab_bolted_pSeries:
       .align 7
 system_reset_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
 
 	.globl machine_check_fwnmi
       .align 7
 machine_check_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
 #endif /* CONFIG_PPC_PSERIES */
@@ -270,7 +258,7 @@ slb_miss_user_pseries:
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG1
+	mfspr	r10,SPRG_SCRATCH0
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	ld	r12,PACA_EXSLB+EX_R3(r13)
 	std	r10,PACA_EXGEN+EX_R13(r13)
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 2436df33c6f..fc8f5b14019 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -91,7 +91,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 #endif /* CONFIG_SMP */
 	/* enable use of FP after return */
 #ifdef CONFIG_PPC32
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r5,SPRN_SPRG_THREAD		/* current task's THREAD (phys) */
 	lwz	r4,THREAD_FPEXC_MODE(r5)
 	ori	r9,r9,MSR_FP		/* enable FP for current */
 	or	r9,r9,r4
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index fc213294275..829c3fe7c5a 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -244,8 +244,8 @@ __secondary_hold_acknowledge:
  * task's thread_struct.
  */
 #define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
+	mtspr	SPRN_SPRG_SCRATCH0,r10;	\
+	mtspr	SPRN_SPRG_SCRATCH1,r11;	\
 	mfcr	r10;		\
 	EXCEPTION_PROLOG_1;	\
 	EXCEPTION_PROLOG_2
@@ -255,7 +255,7 @@ __secondary_hold_acknowledge:
 	andi.	r11,r11,MSR_PR;	\
 	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
 	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
+	mfspr	r11,SPRN_SPRG_THREAD;	\
 	lwz	r11,THREAD_INFO-THREAD(r11);	\
 	addi	r11,r11,THREAD_SIZE;	\
 	tophys(r11,r11);	\
@@ -267,9 +267,9 @@ __secondary_hold_acknowledge:
 	stw	r10,_CCR(r11);		/* save registers */ \
 	stw	r12,GPR12(r11);	\
 	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
+	mfspr	r10,SPRN_SPRG_SCRATCH0;	\
 	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
+	mfspr	r12,SPRN_SPRG_SCRATCH1;	\
 	stw	r12,GPR11(r11);	\
 	mflr	r10;		\
 	stw	r10,_LINK(r11);	\
@@ -355,11 +355,11 @@ i##n:								\
  *	-- paulus.
  */
 	. = 0x200
-	mtspr	SPRN_SPRG0,r10
-	mtspr	SPRN_SPRG1,r11
+	mtspr	SPRN_SPRG_SCRATCH0,r10
+	mtspr	SPRN_SPRG_SCRATCH1,r11
 	mfcr	r10
 #ifdef CONFIG_PPC_CHRP
-	mfspr	r11,SPRN_SPRG2
+	mfspr	r11,SPRN_SPRG_RTAS
 	cmpwi	0,r11,0
 	bne	7f
 #endif /* CONFIG_PPC_CHRP */
@@ -367,7 +367,7 @@ i##n:								\
 7:	EXCEPTION_PROLOG_2
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_CHRP
-	mfspr	r4,SPRN_SPRG2
+	mfspr	r4,SPRN_SPRG_RTAS
 	cmpwi	cr1,r4,0
 	bne	cr1,1f
 #endif
@@ -485,7 +485,7 @@ InstructionTLBMiss:
 	mfspr	r3,SPRN_IMISS
 	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
 	cmplw	0,r1,r3
-	mfspr	r2,SPRN_SPRG3
+	mfspr	r2,SPRN_SPRG_THREAD
 	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
 	lwz	r2,PGDIR(r2)
 	bge-	112f
@@ -559,7 +559,7 @@ DataLoadTLBMiss:
 	mfspr	r3,SPRN_DMISS
 	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
 	cmplw	0,r1,r3
-	mfspr	r2,SPRN_SPRG3
+	mfspr	r2,SPRN_SPRG_THREAD
 	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
 	lwz	r2,PGDIR(r2)
 	bge-	112f
@@ -598,12 +598,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	mtcrf	0x80,r2
 BEGIN_MMU_FTR_SECTION
 	li	r0,1
-	mfspr	r1,SPRN_SPRG4
+	mfspr	r1,SPRN_SPRG_603_LRU
 	rlwinm	r2,r3,20,27,31		/* Get Address bits 15:19 */
 	slw	r0,r0,r2
 	xor	r1,r0,r1
 	srw	r0,r1,r2
-	mtspr   SPRN_SPRG4,r1
+	mtspr   SPRN_SPRG_603_LRU,r1
 	mfspr	r2,SPRN_SRR1
 	rlwimi	r2,r0,31-14,14,14
 	mtspr   SPRN_SRR1,r2
@@ -643,7 +643,7 @@ DataStoreTLBMiss:
 	mfspr	r3,SPRN_DMISS
 	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
 	cmplw	0,r1,r3
-	mfspr	r2,SPRN_SPRG3
+	mfspr	r2,SPRN_SPRG_THREAD
 	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
 	lwz	r2,PGDIR(r2)
 	bge-	112f
@@ -678,12 +678,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	mtcrf	0x80,r2
 BEGIN_MMU_FTR_SECTION
 	li	r0,1
-	mfspr	r1,SPRN_SPRG4
+	mfspr	r1,SPRN_SPRG_603_LRU
 	rlwinm	r2,r3,20,27,31		/* Get Address bits 15:19 */
 	slw	r0,r0,r2
 	xor	r1,r0,r1
 	srw	r0,r1,r2
-	mtspr   SPRN_SPRG4,r1
+	mtspr   SPRN_SPRG_603_LRU,r1
 	mfspr	r2,SPRN_SRR1
 	rlwimi	r2,r0,31-14,14,14
 	mtspr   SPRN_SRR1,r2
@@ -864,9 +864,9 @@ __secondary_start:
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* phys address of our thread_struct */
 	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+	mtspr	SPRN_SPRG_RTAS,r3	/* 0 => not in RTAS */
 
 	/* enable MMU and jump to start_secondary */
 	li	r4,MSR_KERNEL
@@ -947,9 +947,9 @@ start_here:
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
 	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+	mtspr	SPRN_SPRG_RTAS,r3	/* 0 => not in RTAS */
 
 	/* stack */
 	lis	r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 0c96911d429..a90625f9b48 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -103,21 +103,21 @@ _ENTRY(saved_ksp_limit)
 
 /*
  * Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
+ * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
+ * the physical address of the current task thread_struct.
  * Note that we have to have decremented r1 before we write to any fields
  * of the exception frame, since a critical interrupt could occur at any
  * time, and it will write to the area immediately below the current r1.
  */
 #define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG2,r1;						     \
+	mtspr	SPRN_SPRG_SCRATCH0,r10;	/* save two registers to work with */\
+	mtspr	SPRN_SPRG_SCRATCH1,r11;					     \
+	mtspr	SPRN_SPRG_SCRATCH2,r1;					     \
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
 	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r1,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
 	addi	r1,r1,THREAD_SIZE;					     \
 1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
@@ -125,13 +125,13 @@ _ENTRY(saved_ksp_limit)
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
 	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
+	mfspr	r10,SPRN_SPRG_SCRATCH0;					     \
 	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
+	mfspr	r12,SPRN_SPRG_SCRATCH1;					     \
 	stw	r12,GPR11(r11);						     \
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG2;						     \
+	mfspr	r10,SPRN_SPRG_SCRATCH2;					     \
 	mfspr	r12,SPRN_SRR0;						     \
 	stw	r10,GPR1(r11);						     \
 	mfspr	r9,SPRN_SRR1;						     \
@@ -160,7 +160,7 @@ _ENTRY(saved_ksp_limit)
 	lwz	r11,critirq_ctx@l(r11);					     \
 	beq	1f;							     \
 	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r11,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
 1:	addi	r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm  */\
 	tophys(r11,r11);						     \
@@ -265,8 +265,8 @@ label:
  * and exit.  Otherwise, we call heavywight functions to do the work.
  */
 	START_EXCEPTION(0x0300,	DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_SCRATCH1, r11
 #ifdef CONFIG_403GCX
 	stw     r12, 0(r0)
 	stw     r9, 4(r0)
@@ -275,12 +275,12 @@ label:
 	stw     r11, 8(r0)
 	stw     r12, 12(r0)
 #else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
+	mtspr	SPRN_SPRG_SCRATCH3, r12
+	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
 	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
+	mtspr	SPRN_SPRG_SCRATCH6, r11
+	mtspr	SPRN_SPRG_SCRATCH5, r12
 #endif
 
 	/* First, check if it was a zone fault (which means a user
@@ -308,7 +308,7 @@ label:
 	/* Get the PGD for the current thread.
 	 */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 4:
 	tophys(r11, r11)
@@ -355,15 +355,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	PPC405_ERR77_SYNC
 	rfi			/* Should sync shadow TLBs */
 	b	.		/* prevent prefetch past rfi */
@@ -380,15 +380,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	b	DataAccess
 
 /*
@@ -466,8 +466,8 @@ label:
  * load TLB entries from the page table if they exist.
  */
 	START_EXCEPTION(0x1100,	DTLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_SCRATCH1, r11
 #ifdef CONFIG_403GCX
 	stw     r12, 0(r0)
 	stw     r9, 4(r0)
@@ -476,12 +476,12 @@ label:
 	stw     r11, 8(r0)
 	stw     r12, 12(r0)
 #else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
+	mtspr	SPRN_SPRG_SCRATCH3, r12
+	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
 	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
+	mtspr	SPRN_SPRG_SCRATCH6, r11
+	mtspr	SPRN_SPRG_SCRATCH5, r12
 #endif
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
@@ -500,7 +500,7 @@ label:
 	/* Get the PGD for the current thread.
 	 */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 4:
 	tophys(r11, r11)
@@ -550,15 +550,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	b	DataAccess
 
 /* 0x1200 - Instruction TLB Miss Exception
@@ -566,8 +566,8 @@ label:
  * registers and bailout to a different point.
  */
 	START_EXCEPTION(0x1200,	ITLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG_SCRATCH0, r10	 /* Save some working registers */
+	mtspr	SPRN_SPRG_SCRATCH1, r11
 #ifdef CONFIG_403GCX
 	stw     r12, 0(r0)
 	stw     r9, 4(r0)
@@ -576,12 +576,12 @@ label:
 	stw     r11, 8(r0)
 	stw     r12, 12(r0)
 #else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
+	mtspr	SPRN_SPRG_SCRATCH3, r12
+	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
 	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
+	mtspr	SPRN_SPRG_SCRATCH6, r11
+	mtspr	SPRN_SPRG_SCRATCH5, r12
 #endif
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
@@ -600,7 +600,7 @@ label:
 	/* Get the PGD for the current thread.
 	 */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 4:
 	tophys(r11, r11)
@@ -650,15 +650,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	b	InstructionAccess
 
 	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
@@ -803,15 +803,15 @@ finish_tlb_load:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	PPC405_ERR77_SYNC
 	rfi			/* Should sync shadow TLBs */
 	b	.		/* prevent prefetch past rfi */
@@ -835,7 +835,7 @@ start_here:
 	/* ptr to phys current thread */
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* stack */
 	lis	r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 18d8a1677c4..656cfb2d666 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -239,7 +239,7 @@ skpinv:	addi	r4,r4,1				/* Increment */
 
 	/* ptr to current thread */
 	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* stack */
 	lis	r1,init_thread_union@h
@@ -350,12 +350,12 @@ interrupt_base:
 
 	/* Data TLB Error Interrupt */
 	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -374,7 +374,7 @@ interrupt_base:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 	/* Load PID into MMUCR TID */
@@ -446,12 +446,12 @@ tlb_44x_patch_hwater_D:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
@@ -461,12 +461,12 @@ tlb_44x_patch_hwater_D:
 	 * to a different point.
 	 */
 	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -485,7 +485,7 @@ tlb_44x_patch_hwater_D:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 	/* Load PID into MMUCR TID */
@@ -542,12 +542,12 @@ tlb_44x_patch_hwater_I:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	InstructionStorage
 
 	/* Debug Interrupt */
@@ -593,12 +593,12 @@ finish_tlb_load:
 
 	/* Done...restore registers and get out of here.
 	*/
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	rfi					/* Force context change */
 
 /*
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 9196ef36d43..0552f01041a 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -195,7 +195,7 @@ _GLOBAL(generic_secondary_smp_init)
 	mr	r3,r24			/* not found, copy phys to r3	 */
 	b	.kexec_wait		/* next kernel might do better	 */
 
-2:	mtspr	SPRN_SPRG3,r13		/* Save vaddr of paca in SPRG3	 */
+2:	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG */
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
 3:	HMT_LOW
@@ -484,7 +484,7 @@ _GLOBAL(pmac_secondary_start)
 	LOAD_REG_ADDR(r4,paca)		/* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
-	mtspr	SPRN_SPRG3,r13		/* Save vaddr of paca in SPRG3	*/
+	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
 
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
@@ -502,10 +502,10 @@ _GLOBAL(pmac_secondary_start)
  *   1. Processor number
  *   2. Segment table pointer (virtual address)
  * On entry the following are set:
- *   r1	= stack pointer.  vaddr for iSeries, raddr (temp stack) for pSeries
- *   r24   = cpu# (in Linux terms)
- *   r13   = paca virtual address
- *   SPRG3 = paca virtual address
+ *   r1	       = stack pointer.  vaddr for iSeries, raddr (temp stack) for pSeries
+ *   r24       = cpu# (in Linux terms)
+ *   r13       = paca virtual address
+ *   SPRG_PACA = paca virtual address
  */
 	.globl	__secondary_start
 __secondary_start:
@@ -641,7 +641,7 @@ _INIT_STATIC(start_here_multiplatform)
 
 	/* Restore parameters passed from prom_init/kexec */
 	mr	r3,r31
-	bl	.early_setup		/* also sets r13 and SPRG3 */
+	bl	.early_setup		/* also sets r13 and SPRG_PACA */
 
 	LOAD_REG_ADDR(r3, .start_here_common)
 	ld	r4,PACAKMSR(r13)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 52ff8c53b93..6ded19d0189 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -110,8 +110,8 @@ turn_on_mmu:
  * task's thread_struct.
  */
 #define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
+	mtspr	SPRN_SPRG_SCRATCH0,r10;	\
+	mtspr	SPRN_SPRG_SCRATCH1,r11;	\
 	mfcr	r10;		\
 	EXCEPTION_PROLOG_1;	\
 	EXCEPTION_PROLOG_2
@@ -121,7 +121,7 @@ turn_on_mmu:
 	andi.	r11,r11,MSR_PR;	\
 	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
 	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
+	mfspr	r11,SPRN_SPRG_THREAD;	\
 	lwz	r11,THREAD_INFO-THREAD(r11);	\
 	addi	r11,r11,THREAD_SIZE;	\
 	tophys(r11,r11);	\
@@ -133,9 +133,9 @@ turn_on_mmu:
 	stw	r10,_CCR(r11);		/* save registers */ \
 	stw	r12,GPR12(r11);	\
 	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
+	mfspr	r10,SPRN_SPRG_SCRATCH0;	\
 	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
+	mfspr	r12,SPRN_SPRG_SCRATCH1;	\
 	stw	r12,GPR11(r11);	\
 	mflr	r10;		\
 	stw	r10,_LINK(r11);	\
@@ -603,8 +603,9 @@ start_here:
 	/* ptr to phys current thread */
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
+	/* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
 	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
 
 	/* stack */
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 5f9febc8d14..50504ae39cb 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -20,14 +20,14 @@
 #endif
 
 #define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG4W,r1;						     \
+	mtspr	SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\
+	mtspr	SPRN_SPRG_WSCRATCH1,r11;				     \
+	mtspr	SPRN_SPRG_WSCRATCH2,r1;					     \
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
 	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r1,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
 	ALLOC_STACK_FRAME(r1, THREAD_SIZE);				     \
 1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
@@ -35,13 +35,13 @@
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
 	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
+	mfspr	r10,SPRN_SPRG_RSCRATCH0;					\
 	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
+	mfspr	r12,SPRN_SPRG_RSCRATCH1;				     \
 	stw	r12,GPR11(r11);						     \
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG4R;					     \
+	mfspr	r10,SPRN_SPRG_RSCRATCH2;				     \
 	mfspr	r12,SPRN_SRR0;						     \
 	stw	r10,GPR1(r11);						     \
 	mfspr	r9,SPRN_SRR1;						     \
@@ -69,21 +69,11 @@
  * providing configurations that micro-optimize space usage.
  */
 
-/* CRIT_SPRG only used in critical exception handling */
-#define CRIT_SPRG	SPRN_SPRG2
-/* MCHECK_SPRG only used in machine check exception handling */
-#define MCHECK_SPRG	SPRN_SPRG6W
-
-#define MCHECK_STACK_BASE	mcheckirq_ctx
+#define MC_STACK_BASE		mcheckirq_ctx
 #define CRIT_STACK_BASE		critirq_ctx
 
 /* only on e500mc/e200 */
-#define DEBUG_STACK_BASE	dbgirq_ctx
-#ifdef CONFIG_E200
-#define DEBUG_SPRG		SPRN_SPRG6W
-#else
-#define DEBUG_SPRG		SPRN_SPRG9
-#endif
+#define DBG_STACK_BASE		dbgirq_ctx
 
 #define EXC_LVL_FRAME_OVERHEAD	(THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
 
@@ -110,7 +100,7 @@
  * critical/machine check exception stack at low physical addresses.
  */
 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
-	mtspr	exc_level##_SPRG,r8;					     \
+	mtspr	SPRN_SPRG_WSCRATCH_##exc_level,r8;			     \
 	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
 	stw	r9,GPR9(r8);		/* save various registers	   */\
 	mfcr	r9;			/* save CR in r9 for now	   */\
@@ -119,7 +109,7 @@
 	stw	r9,_CCR(r8);		/* save CR on stack		   */\
 	mfspr	r10,exc_level_srr1;	/* check whether user or kernel    */\
 	andi.	r10,r10,MSR_PR;						     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r11,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
 	addi	r11,r11,EXC_LVL_FRAME_OVERHEAD;	/* allocate stack frame    */\
 	beq	1f;							     \
@@ -140,7 +130,7 @@
 	lwz	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11);			     \
 	stw	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8);			     \
 	mr	r11,r8;							     \
-2:	mfspr	r8,exc_level##_SPRG;					     \
+2:	mfspr	r8,SPRN_SPRG_RSCRATCH_##exc_level;			     \
 	stw	r12,GPR12(r11);		/* save various registers	   */\
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
@@ -161,9 +151,9 @@
 #define CRITICAL_EXCEPTION_PROLOG \
 		EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
 #define DEBUG_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
+		EXC_LEVEL_EXCEPTION_PROLOG(DBG, SPRN_DSRR0, SPRN_DSRR1)
 #define MCHECK_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
+		EXC_LEVEL_EXCEPTION_PROLOG(MC, SPRN_MCSRR0, SPRN_MCSRR1)
 
 /*
  * Exception vectors.
@@ -282,13 +272,13 @@ label:
 	mtspr	SPRN_DSRR1,r9;						      \
 	lwz	r9,GPR9(r11);						      \
 	lwz	r12,GPR12(r11);						      \
-	mtspr	DEBUG_SPRG,r8;						      \
-	BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
+	mtspr	SPRN_SPRG_WSCRATCH_DBG,r8;				      \
+	BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
 	lwz	r10,GPR10(r8);						      \
 	lwz	r11,GPR11(r8);						      \
-	mfspr	r8,DEBUG_SPRG;						      \
+	mfspr	r8,SPRN_SPRG_RSCRATCH_DBG;				      \
 									      \
-	PPC_RFDI;								      \
+	PPC_RFDI;							      \
 	b	.;							      \
 									      \
 	/* continue normal handling for a debug exception... */		      \
@@ -335,11 +325,11 @@ label:
 	mtspr	SPRN_CSRR1,r9;						      \
 	lwz	r9,GPR9(r11);						      \
 	lwz	r12,GPR12(r11);						      \
-	mtspr	CRIT_SPRG,r8;						      \
+	mtspr	SPRN_SPRG_WSCRATCH_CRIT,r8;				      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
 	lwz	r10,GPR10(r8);						      \
 	lwz	r11,GPR11(r8);						      \
-	mfspr	r8,CRIT_SPRG;						      \
+	mfspr	r8,SPRN_SPRG_RSCRATCH_CRIT;				      \
 									      \
 	rfci;								      \
 	b	.;							      \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 5bdcc06d294..eca80482ae7 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -361,7 +361,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 
 	/* ptr to current thread */
 	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* stack */
 	lis	r1,init_thread_union@h
@@ -532,12 +532,12 @@ interrupt_base:
 
 	/* Data TLB Error Interrupt */
 	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -557,7 +557,7 @@ interrupt_base:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 4:
@@ -598,12 +598,12 @@ interrupt_base:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
@@ -613,12 +613,12 @@ interrupt_base:
 	 * to a different point.
 	 */
 	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -638,7 +638,7 @@ interrupt_base:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 4:
@@ -666,12 +666,12 @@ interrupt_base:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	InstructionStorage
 
 #ifdef CONFIG_SPE
@@ -790,12 +790,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
 	tlbwe
 
 	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	rfi					/* Force context change */
 
 #ifdef CONFIG_SPE
@@ -839,7 +839,7 @@ load_up_spe:
 #endif /* !CONFIG_SMP */
 	/* enable use of SPE after return */
 	oris	r9,r9,MSR_SPE@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
 	li	r4,1
 	li	r10,THREAD_ACC
 	stw	r4,THREAD_USED_SPE(r5)
@@ -1118,7 +1118,7 @@ __secondary_start:
 
 	/* ptr to current thread */
 	addi	r4,r2,THREAD	/* address of our thread_struct */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* Setup the defaults for TLB entries */
 	li	r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 1f6816003eb..91b89b8d63d 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -142,11 +142,11 @@ early_param("smt-enabled", early_smt_enabled);
 #define check_smt_enabled()
 #endif /* CONFIG_SMP */
 
-/* Put the paca pointer into r13 and SPRG3 */
+/* Put the paca pointer into r13 and SPRG_PACA */
 void __init setup_paca(int cpu)
 {
 	local_paca = &paca[cpu];
-	mtspr(SPRN_SPRG3, local_paca);
+	mtspr(SPRN_SPRG_PACA, local_paca);
 }
 
 /*
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ea4d64644d0..67b6916f0e9 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -65,7 +65,7 @@ _GLOBAL(load_up_altivec)
 1:
 	/* enable use of VMX after return */
 #ifdef CONFIG_PPC32
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r5,SPRN_SPRG_THREAD		/* current task's THREAD (phys) */
 	oris	r9,r9,MSR_VEC@h
 #else
 	ld	r4,PACACURRENT(r13)
diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index d0c6f841bbd..380a78cf484 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -56,8 +56,8 @@
 .macro KVM_HANDLER ivor_nr
 _GLOBAL(kvmppc_handler_\ivor_nr)
 	/* Get pointer to vcpu and record exit number. */
-	mtspr	SPRN_SPRG0, r4
-	mfspr	r4, SPRN_SPRG1
+	mtspr	SPRN_SPRG_WSCRATCH0, r4
+	mfspr	r4, SPRN_SPRG_RVCPU
 	stw	r5, VCPU_GPR(r5)(r4)
 	stw	r6, VCPU_GPR(r6)(r4)
 	mfctr	r5
@@ -95,7 +95,7 @@ _GLOBAL(kvmppc_handler_len)
 
 
 /* Registers:
- *  SPRG0: guest r4
+ *  SPRG_SCRATCH0: guest r4
  *  r4: vcpu pointer
  *  r5: KVM exit number
  */
@@ -181,7 +181,7 @@ _GLOBAL(kvmppc_resume_host)
 	stw	r3, VCPU_LR(r4)
 	mfxer	r3
 	stw	r3, VCPU_XER(r4)
-	mfspr	r3, SPRN_SPRG0
+	mfspr	r3, SPRN_SPRG_RSCRATCH0
 	stw	r3, VCPU_GPR(r4)(r4)
 	mfspr	r3, SPRN_SRR0
 	stw	r3, VCPU_PC(r4)
@@ -374,7 +374,7 @@ lightweight_exit:
 	mtspr	SPRN_IVPR, r8
 
 	/* Save vcpu pointer for the exception handlers. */
-	mtspr	SPRN_SPRG1, r4
+	mtspr	SPRN_SPRG_WVCPU, r4
 
 	/* Can't switch the stack pointer until after IVPR is switched,
 	 * because host interrupt handlers would get confused. */
@@ -384,13 +384,13 @@ lightweight_exit:
 	/* Host interrupt handlers may have clobbered these guest-readable
 	 * SPRGs, so we need to reload them here with the guest's values. */
 	lwz	r3, VCPU_SPRG4(r4)
-	mtspr	SPRN_SPRG4, r3
+	mtspr	SPRN_SPRG4W, r3
 	lwz	r3, VCPU_SPRG5(r4)
-	mtspr	SPRN_SPRG5, r3
+	mtspr	SPRN_SPRG5W, r3
 	lwz	r3, VCPU_SPRG6(r4)
-	mtspr	SPRN_SPRG6, r3
+	mtspr	SPRN_SPRG6W, r3
 	lwz	r3, VCPU_SPRG7(r4)
-	mtspr	SPRN_SPRG7, r3
+	mtspr	SPRN_SPRG7W, r3
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	/* save enter time */
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 14af8cedab7..b13d58932bf 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -40,7 +40,7 @@ mmu_hash_lock:
  * The address is in r4, and r3 contains an access flag:
  * _PAGE_RW (0x400) if a write.
  * r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
+ * SPRG_THREAD contains the physical address of the current task's thread.
  *
  * Returns to the caller if the access is illegal or there is no
  * mapping for the address.  Otherwise it places an appropriate PTE
@@ -68,7 +68,7 @@ _GLOBAL(hash_page)
 	/* Get PTE (linux-style) and check access */
 	lis	r0,KERNELBASE@h		/* check if kernel address */
 	cmplw	0,r4,r0
-	mfspr	r8,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r8,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
 	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
 	lwz	r5,PGDIR(r8)		/* virt page-table root */
 	blt+	112f			/* assume user more likely */
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 2f581521eb9..2b807597923 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -47,7 +47,7 @@ system_reset_iSeries:
 	LOAD_REG_ADDR(r13, paca)
 	mulli	r0,r23,PACA_SIZE
 	add	r13,r13,r0
-	mtspr	SPRN_SPRG3,r13		/* Save it away for the future */
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
@@ -116,7 +116,7 @@ iSeries_secondary_smp_loop:
 #endif /* CONFIG_SMP */
 	li	r0,-1			/* r0=-1 indicates a Hypervisor call */
 	sc				/* Invoke the hypervisor via a system call */
-	mfspr	r13,SPRN_SPRG3		/* Put r13 back ???? */
+	mfspr	r13,SPRN_SPRG_PACA	/* Put r13 back ???? */
 	b	2b			/* If SMP not configured, secondaries
 					 * loop forever */
 
@@ -126,9 +126,9 @@ iSeries_secondary_smp_loop:
 
 	.globl data_access_iSeries
 data_access_iSeries:
-	mtspr	SPRN_SPRG1,r13
+	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG2,r12
+	mtspr	SPRN_SPRG_SCRATCH1,r12
 	mfspr	r13,SPRN_DAR
 	mfspr	r12,SPRN_DSISR
 	srdi	r13,r13,60
@@ -137,7 +137,7 @@ BEGIN_FTR_SECTION
 	cmpwi	r13,0x2c
 	beq	.do_stab_bolted_iSeries
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	EXCEPTION_PROLOG_1(PACA_EXGEN)
 	EXCEPTION_PROLOG_ISERIES_1
@@ -145,15 +145,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 
 .do_stab_bolted_iSeries:
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 	EXCEPTION_PROLOG_1(PACA_EXSLB)
 	EXCEPTION_PROLOG_ISERIES_1
 	b	.do_stab_bolted
 
 	.globl	data_access_slb_iSeries
 data_access_slb_iSeries:
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13	/* save r13 */
+	mfspr	r13,SPRN_SPRG_PACA	/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_DAR
 	std	r9,PACA_EXSLB+EX_R9(r13)
@@ -165,7 +165,7 @@ data_access_slb_iSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	ld	r12,PACALPPACAPTR(r13)
 	ld	r12,LPPACASRR1(r12)
@@ -175,8 +175,8 @@ data_access_slb_iSeries:
 
 	.globl	instruction_access_slb_iSeries
 instruction_access_slb_iSeries:
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13	/* save r13 */
+	mfspr	r13,SPRN_SPRG_PACA	/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	ld	r3,PACALPPACAPTR(r13)
 	ld	r3,LPPACASRR0(r3)	/* get SRR0 value */
@@ -189,7 +189,7 @@ instruction_access_slb_iSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	ld	r12,PACALPPACAPTR(r13)
 	ld	r12,LPPACASRR1(r12)
@@ -200,7 +200,7 @@ slb_miss_user_iseries:
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG1
+	mfspr	r10,SPRG_SCRATCH0
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	ld	r12,PACA_EXSLB+EX_R3(r13)
 	std	r10,PACA_EXGEN+EX_R13(r13)
@@ -221,7 +221,7 @@ slb_miss_user_iseries:
 	.globl	system_call_iSeries
 system_call_iSeries:
 	mr	r9,r13
-	mfspr	r13,SPRN_SPRG3
+	mfspr	r13,SPRN_SPRG_PACA
 	EXCEPTION_PROLOG_ISERIES_1
 	b	system_call_common
 
diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h
index e26eb86ac73..bae3fba5ad8 100644
--- a/arch/powerpc/platforms/iseries/exception.h
+++ b/arch/powerpc/platforms/iseries/exception.h
@@ -38,7 +38,7 @@
 	.globl label##_iSeries;						\
 label##_iSeries:							\
 	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
 	EXCEPTION_PROLOG_1(area);					\
 	EXCEPTION_PROLOG_ISERIES_1;					\
 	b	label##_common
@@ -47,7 +47,7 @@ label##_iSeries:							\
 	.globl label##_iSeries;						\
 label##_iSeries:							\
 	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
 	EXCEPTION_PROLOG_1(PACA_EXGEN);					\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	cmpwi	0,r10,0;						\
-- 
cgit v1.2.3


From c5a8c0c99f67ae8a784faafbaaea1529825796e2 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 16 Jul 2009 19:36:57 +0000
Subject: powerpc: Remove use of a second scratch SPRG in STAB code

The STAB code used on Power3 and RS/64 uses a second scratch SPRG to
save a GPR in order to decide whether to go to do_stab_bolted_* or
to handle a normal data access exception.

This prevents our scheme of freeing SPRG3 which is user visible for
user uses since we cannot use SPRG0 which, on RS/64, seems to be
read-only for supervisor mode (like POWER4).

This reworks the STAB exception entry to use the PACA as temporary
storage instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64s.h   |  7 ++++--
 arch/powerpc/include/asm/reg.h             |  3 +--
 arch/powerpc/kernel/exceptions-64s.S       | 38 ++++++++++++++++++++----------
 arch/powerpc/platforms/iseries/exception.S | 37 +++++++++++++++++++----------
 4 files changed, 55 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 773e380b5fe..a98653b2623 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -66,8 +66,7 @@
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
-	EXCEPTION_PROLOG_1(area);					\
+#define EXCEPTION_PROLOG_PSERIES_1(label)				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
 	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
@@ -78,6 +77,10 @@
 	rfid;								\
 	b	.	/* prevent speculative execution */
 
+#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+	EXCEPTION_PROLOG_1(area);					\
+	EXCEPTION_PROLOG_PSERIES_1(label);
+
 /*
  * The common exception prolog is used for all except a few exceptions
  * such as a segment miss on a kernel address.  We have to be prepared
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index a8179cc99ac..d17af2b3d4c 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -654,7 +654,7 @@
  * 64-bit server:
  *	- SPRG0 unused (reserved for HV on Power4)
  *	- SPRG1 scratch for exception vectors
- *	- SPRG2 scratch for exception vectors
+ *	- SPRG2 unused
  *
  * All 32-bit:
  *	- SPRG3 current thread_info pointer
@@ -707,7 +707,6 @@
 
 #ifdef CONFIG_PPC_BOOK3S_64
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG1
-#define SPRN_SPRG_SCRATCH1	SPRN_SPRG2
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_32
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4e9640cc056..50f2ad36ed0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -50,18 +50,28 @@ data_access_pSeries:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG_SCRATCH1,r12
-	mfspr	r13,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	srdi	r13,r13,60
-	rlwimi	r13,r12,16,0x20
-	mfcr	r12
-	cmpwi	r13,0x2c
+	mfspr	r13,SPRN_SPRG_PACA
+	std	r9,PACA_EXSLB+EX_R9(r13)
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	mfspr	r10,SPRN_DAR
+	mfspr	r9,SPRN_DSISR
+	srdi	r10,r10,60
+	rlwimi	r10,r9,16,0x20
+	mfcr	r9
+	cmpwi	r10,0x2c
 	beq	do_stab_bolted_pSeries
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r12,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R13(r13)
+	EXCEPTION_PROLOG_PSERIES_1(data_access_common)
+FTR_SECTION_ELSE
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
 
 	. = 0x380
 	.globl data_access_slb_pSeries
@@ -224,9 +234,11 @@ masked_interrupt:
 
 	.align	7
 do_stab_bolted_pSeries:
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted)
 
 #ifdef CONFIG_PPC_PSERIES
 /*
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 2b807597923..5369653dcf6 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -128,25 +128,36 @@ iSeries_secondary_smp_loop:
 data_access_iSeries:
 	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG_SCRATCH1,r12
-	mfspr	r13,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	srdi	r13,r13,60
-	rlwimi	r13,r12,16,0x20
-	mfcr	r12
-	cmpwi	r13,0x2c
+	mfspr	r13,SPRN_SPRG_PACA
+	std	r9,PACA_EXSLB+EX_R9(r13)
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	mfspr	r10,SPRN_DAR
+	mfspr	r9,SPRN_DSISR
+	srdi	r10,r10,60
+	rlwimi	r10,r9,16,0x20
+	mfcr	r9
+	cmpwi	r10,0x2c
 	beq	.do_stab_bolted_iSeries
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r12,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R13(r13)
+	EXCEPTION_PROLOG_ISERIES_1
+FTR_SECTION_ELSE
 	EXCEPTION_PROLOG_1(PACA_EXGEN)
 	EXCEPTION_PROLOG_ISERIES_1
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
 	b	data_access_common
 
 .do_stab_bolted_iSeries:
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-	EXCEPTION_PROLOG_1(PACA_EXSLB)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXSLB+EX_R13(r13)
 	EXCEPTION_PROLOG_ISERIES_1
 	b	.do_stab_bolted
 
-- 
cgit v1.2.3


From 2e2ddb24d36106e029f6eeb3df611178a36fb295 Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Tue, 21 Jul 2009 00:17:17 +0000
Subject: powerpc/cell: Replace strncpy by strlcpy

Replace strncpy() and explicit null-termination by strlcpy()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/celleb_setup.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index 07c234f6b2b..e5384557977 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -80,8 +80,7 @@ static void celleb_show_cpuinfo(struct seq_file *m)
 
 static int __init celleb_machine_type_hack(char *ptr)
 {
-	strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
-	celleb_machine_type[sizeof(celleb_machine_type)-1] = 0;
+	strlcpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
 	return 0;
 }
 
-- 
cgit v1.2.3


From 066c4b87e927985a083481c92b4aebade8fe4ab3 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 21 Jul 2009 15:25:53 +0000
Subject: powerpc/mm: Fix definitions of FORCE_MAX_ZONEORDER in Kconfig

The current definitions set ranges and defaults for 32 and 64-bit
only using "PPC_STD_MMU" which means hash based MMU. This uselessly
restrict the usefulness for the upcoming 64-bit BookE port, but more
than that, it's broken on 32-bit since the only 32-bit platform
supporting multiple page sizes currently is 44x which does -not-
have PPC_STD_MMU_32 set.

This fixes it by using PPC64 and PPC32 instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d00131ca083..52349ef1b3a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -492,16 +492,16 @@ endchoice
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
-	range 9 64 if PPC_STD_MMU_64 && PPC_64K_PAGES
-	default "9" if PPC_STD_MMU_64 && PPC_64K_PAGES
-	range 13 64 if PPC_STD_MMU_64 && !PPC_64K_PAGES
-	default "13" if PPC_STD_MMU_64 && !PPC_64K_PAGES
-	range 9 64 if PPC_STD_MMU_32 && PPC_16K_PAGES
-	default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
-	range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
-	default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
-	range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES
-	default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES
+	range 9 64 if PPC64 && PPC_64K_PAGES
+	default "9" if PPC64 && PPC_64K_PAGES
+	range 13 64 if PPC64 && !PPC_64K_PAGES
+	default "13" if PPC64 && !PPC_64K_PAGES
+	range 9 64 if PPC32 && PPC_16K_PAGES
+	default "9" if PPC32 && PPC_16K_PAGES
+	range 7 64 if PPC32 && PPC_64K_PAGES
+	default "7" if PPC32 && PPC_64K_PAGES
+	range 5 64 if PPC32 && PPC_256K_PAGES
+	default "5" if PPC32 && PPC_256K_PAGES
 	range 11 64
 	default "11"
 	help
-- 
cgit v1.2.3


From 527b3639616b21c257518ee7c26fbf05232db0c0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:56:58 +0000
Subject: powerpc/pmac: Fix PowerSurge SMP IPI allocation

The code for setting up the IPIs for SMP PowerSurge marchines bitrot,
it needs to properly map the HW interrupt number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 6d4da7b46b4..937a38e7317 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -408,7 +408,7 @@ static void __init smp_psurge_setup_cpu(int cpu_nr)
 	/* reset the entry point so if we get another intr we won't
 	 * try to startup again */
 	out_be32(psurge_start, 0x100);
-	if (setup_irq(30, &psurge_irqaction))
+	if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
 		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
-- 
cgit v1.2.3


From 063517bea114d4cb57bf582353d0a99b82775a63 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:52:56 +0000
Subject: powerpc: Change PACA from SPRG3 to SPRG1

This change the SPRG used to store the PACA on ppc64 from
SPRG3 to SPRG1. SPRG3 is user readable on most processors
and we want to use it for other things. We change the scratch
SPRG used by exception vectors from SRPG1 to SPRG2.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index d17af2b3d4c..2cedbb42761 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -649,12 +649,12 @@
  * SPRG usage:
  *
  * All 64-bit:
- *	- SPRG3 stores PACA pointer
+ *	- SPRG1 stores PACA pointer
  *
  * 64-bit server:
  *	- SPRG0 unused (reserved for HV on Power4)
- *	- SPRG1 scratch for exception vectors
- *	- SPRG2 unused
+ *	- SPRG2 scratch for exception vectors
+ *	- SPRG3 unused (user visible)
  *
  * All 32-bit:
  *	- SPRG3 current thread_info pointer
@@ -700,13 +700,13 @@
  *
  */
 #ifdef CONFIG_PPC64
-#define SPRN_SPRG_PACA 		SPRN_SPRG3
+#define SPRN_SPRG_PACA 		SPRN_SPRG1
 #else
 #define SPRN_SPRG_THREAD 	SPRN_SPRG3
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_64
-#define SPRN_SPRG_SCRATCH0	SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG2
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_32
-- 
cgit v1.2.3


From f7d4f68d971b8234491b4a0be58aa6f659c1c194 Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Thu, 23 Jul 2009 08:57:18 +0000
Subject: powerpc: Makefile simplification through use of cc-ifversion

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index bc35f4e2b81..952a3963e9e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -77,7 +77,7 @@ CPP		= $(CC) -E $(KBUILD_CFLAGS)
 CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
 
 ifeq ($(CONFIG_PPC64),y)
-GCC_BROKEN_VEC	:= $(shell if [ $(call cc-version) -lt 0400 ] ; then echo "y"; fi)
+GCC_BROKEN_VEC	:= $(call cc-ifversion, -lt, 0400, y)
 
 ifeq ($(CONFIG_POWER4_ONLY),y)
 ifeq ($(CONFIG_ALTIVEC),y)
-- 
cgit v1.2.3


From c79b29735d28d819380b584d6707b4110ee759f3 Mon Sep 17 00:00:00 2001
From: Lucian Adrian Grijincu <lgrijincu@ixiacom.com>
Date: Thu, 23 Jul 2009 00:13:37 +0000
Subject: powerpc: Update boot wrapper script with the new location of dtc

dtc was moved in 9fffb55f66127b52c937ede5196ebfa0c0d50bce from
arch/powerpc/boot/ to scripts/dtc/

This patch updates the wrapper script to point to the new location of dtc.

Signed-off-by: Lucian Adrian Grijincu <lgrijincu@ixiacom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/wrapper | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 4db487d1d2a..ac9e9a58b2b 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -46,6 +46,7 @@ CROSS=
 # directory for object and other files used by this script
 object=arch/powerpc/boot
 objbin=$object
+dtc=scripts/dtc/dtc
 
 # directory for working files
 tmpdir=.
@@ -124,7 +125,7 @@ if [ -n "$dts" ]; then
     if [ -z "$dtb" ]; then
 	dtb="$platform.dtb"
     fi
-    $object/dtc -O dtb -o "$dtb" -b 0 "$dts"
+    $dtc -O dtb -o "$dtb" -b 0 "$dts"
 fi
 
 if [ -z "$kernel" ]; then
-- 
cgit v1.2.3


From dd90bbd5fb763ab8924135a30956030c7a7b94fc Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 28 Jul 2009 11:54:32 +1000
Subject: powerpc: Add compat_sys_truncate

The truncate syscall has a signed long parameter, so when using a 32-
bit userspace with a 64-bit kernel the argument is zero-extended
instead of sign-extended. Adding the compat_sys_truncate function
fixes the issue.

This was noticed during an LSB truncate test failure. The test was
checking for the correct error number set when truncate is called with
a length of -1. The test can be found at:

http://bzr.linuxfoundation.org/lsb/devel/runtime-test?cmd=inventory;rev=stewb%40linux-foundation.org-20090626205411-sfb23cc0tjj7jzgm;path=modules/vsx-pcts/tset/POSIX.os/files/truncate/

BenH: Added compat_sys_ftruncate() as well, same issue.

Signed-off-by: Chase Douglas <cndougla@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/systbl.h |  4 ++--
 arch/powerpc/kernel/sys_ppc32.c   | 12 ++++++++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 370600ca276..ed24bd92fe4 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -95,8 +95,8 @@ SYSCALL(reboot)
 SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir)
 SYSCALL_SPU(mmap)
 SYSCALL_SPU(munmap)
-SYSCALL_SPU(truncate)
-SYSCALL_SPU(ftruncate)
+COMPAT_SYS_SPU(truncate)
+COMPAT_SYS_SPU(ftruncate)
 SYSCALL_SPU(fchmod)
 SYSCALL_SPU(fchown)
 COMPAT_SYS_SPU(getpriority)
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index bb1cfcfdbbb..1cc5e9e5da9 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -343,6 +343,18 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin)
 	return sys_lseek(fd, (int)offset, origin);
 }
 
+long compat_sys_truncate(const char __user * path, u32 length)
+{
+	/* sign extend length */
+	return sys_truncate(path, (int)length);
+}
+
+long compat_sys_ftruncate(int fd, u32 length)
+{
+	/* sign extend length */
+	return sys_ftruncate(fd, (int)length);
+}
+
 /* Note: it is necessary to treat bufsiz as an unsigned int,
  * with the corresponding cast to a signed int to insure that the 
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
-- 
cgit v1.2.3


From 7d60b02cc7e6d67b498eed9ecb58010f61422325 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:04 +0000
Subject: powerpc/mm: Fix misplaced #endif in pgtable-ppc64-64k.h

A misplaced #endif causes more definitions than intended to be
protected by #ifndef __ASSEMBLY__. This breaks upcoming 64-bit
BookE support patch when using 64k pages.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc64-64k.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
index 6cc085b945a..90533ddcd70 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
@@ -10,10 +10,10 @@
 #define PGD_INDEX_SIZE  4
 
 #ifndef __ASSEMBLY__
-
 #define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
 #define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
 #define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif	/* __ASSEMBLY__ */
 
 #define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
@@ -32,8 +32,6 @@
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
-#endif	/* __ASSEMBLY__ */
-
 /* Bits to mask out from a PMD to get to the PTE page */
 #define PMD_MASKED_BITS		0x1ff
 /* Bits to mask out from a PGD/PUD to get to the PMD page */
-- 
cgit v1.2.3


From 6c1719942e19936044c4673b18afa26e45a02320 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:07 +0000
Subject: powerpc/of: Remove useless register save/restore when calling OF back

enter_prom() used to save and restore registers such as CTR, XER etc..
which are volatile, or SRR0,1... which we don't care about. This
removes a bunch of useless code and while at it turns an mtmsrd into
an MTMSRD macro which will be useful to Book3E.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/entry_64.S | 38 ++++++--------------------------------
 1 file changed, 6 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index dbf0e311561..1cb0f3d1714 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -823,30 +823,17 @@ _GLOBAL(enter_prom)
 	 * of all registers that it saves.  We therefore save those registers
 	 * PROM might touch to the stack.  (r0, r3-r13 are caller saved)
    	 */
-	SAVE_8GPRS(2, r1)
+	SAVE_GPR(2, r1)
 	SAVE_GPR(13, r1)
 	SAVE_8GPRS(14, r1)
 	SAVE_10GPRS(22, r1)
-	mfcr	r4
-	std	r4,_CCR(r1)
-	mfctr	r5
-	std	r5,_CTR(r1)
-	mfspr	r6,SPRN_XER
-	std	r6,_XER(r1)
-	mfdar	r7
-	std	r7,_DAR(r1)
-	mfdsisr	r8
-	std	r8,_DSISR(r1)
-	mfsrr0	r9
-	std	r9,_SRR0(r1)
-	mfsrr1	r10
-	std	r10,_SRR1(r1)
+	mfcr	r10
 	mfmsr	r11
+	std	r10,_CCR(r1)
 	std	r11,_MSR(r1)
 
 	/* Get the PROM entrypoint */
-	ld	r0,GPR4(r1)
-	mtlr	r0
+	mtlr	r4
 
 	/* Switch MSR to 32 bits mode
 	 */
@@ -860,8 +847,7 @@ _GLOBAL(enter_prom)
         mtmsrd  r11
         isync
 
-	/* Restore arguments & enter PROM here... */
-	ld	r3,GPR3(r1)
+	/* Enter PROM here... */
 	blrl
 
 	/* Just make sure that r1 top 32 bits didn't get
@@ -871,7 +857,7 @@ _GLOBAL(enter_prom)
 
 	/* Restore the MSR (back to 64 bits) */
 	ld	r0,_MSR(r1)
-	mtmsrd	r0
+	MTMSRD(r0)
         isync
 
 	/* Restore other registers */
@@ -881,18 +867,6 @@ _GLOBAL(enter_prom)
 	REST_10GPRS(22, r1)
 	ld	r4,_CCR(r1)
 	mtcr	r4
-	ld	r5,_CTR(r1)
-	mtctr	r5
-	ld	r6,_XER(r1)
-	mtspr	SPRN_XER,r6
-	ld	r7,_DAR(r1)
-	mtdar	r7
-	ld	r8,_DSISR(r1)
-	mtdsisr	r8
-	ld	r9,_SRR0(r1)
-	mtsrr0	r9
-	ld	r10,_SRR1(r1)
-	mtsrr1	r10
 	
         addi	r1,r1,PROM_FRAME_SIZE
 	ld	r0,16(r1)
-- 
cgit v1.2.3


From fcce810986b3f32a8322faf240f8cc5560a4c463 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:10 +0000
Subject: powerpc/mm: Add HW threads support to no_hash TLB management

The current "no hash" MMU context management code is written with
the assumption that one CPU == one TLB. This is not the case on
implementations that support HW multithreading, where several
linux CPUs can share the same TLB.

This adds some basic support for this to our context management
and our TLB flushing code.

It also cleans up the optional debugging output a bit

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/cputhreads.h | 16 ++++++
 arch/powerpc/mm/mmu_context_nohash.c  | 93 +++++++++++++++++++++++------------
 arch/powerpc/mm/tlb_nohash.c          | 10 +++-
 3 files changed, 86 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index fb11b0c459b..a8e18447c62 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -5,6 +5,15 @@
 
 /*
  * Mapping of threads to cores
+ *
+ * Note: This implementation is limited to a power of 2 number of
+ * threads per core and the same number for each core in the system
+ * (though it would work if some processors had less threads as long
+ * as the CPU numbers are still allocated, just not brought offline).
+ *
+ * However, the API allows for a different implementation in the future
+ * if needed, as long as you only use the functions and not the variables
+ * directly.
  */
 
 #ifdef CONFIG_SMP
@@ -67,5 +76,12 @@ static inline int cpu_first_thread_in_core(int cpu)
 	return cpu & ~(threads_per_core - 1);
 }
 
+static inline int cpu_last_thread_in_core(int cpu)
+{
+	return cpu | (threads_per_core - 1);
+}
+
+
+
 #endif /* _ASM_POWERPC_CPUTHREADS_H */
 
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index b1a727def15..834436d6d6b 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -25,10 +25,20 @@
  *     also clear mm->cpu_vm_mask bits when processes are migrated
  */
 
-#undef DEBUG
-#define DEBUG_STEAL_ONLY
-#undef DEBUG_MAP_CONSISTENCY
-/*#define DEBUG_CLAMP_LAST_CONTEXT   15 */
+#define DEBUG_MAP_CONSISTENCY
+#define DEBUG_CLAMP_LAST_CONTEXT   31
+//#define DEBUG_HARDER
+
+/* We don't use DEBUG because it tends to be compiled in always nowadays
+ * and this would generate way too much output
+ */
+#ifdef DEBUG_HARDER
+#define pr_hard(args...)	printk(KERN_DEBUG args)
+#define pr_hardcont(args...)	printk(KERN_CONT args)
+#else
+#define pr_hard(args...)	do { } while(0)
+#define pr_hardcont(args...)	do { } while(0)
+#endif
 
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -71,7 +81,7 @@ static DEFINE_SPINLOCK(context_lock);
 static unsigned int steal_context_smp(unsigned int id)
 {
 	struct mm_struct *mm;
-	unsigned int cpu, max;
+	unsigned int cpu, max, i;
 
 	max = last_context - first_context;
 
@@ -89,15 +99,22 @@ static unsigned int steal_context_smp(unsigned int id)
 				id = first_context;
 			continue;
 		}
-		pr_devel("[%d] steal context %d from mm @%p\n",
-			 smp_processor_id(), id, mm);
+		pr_hardcont(" | steal %d from 0x%p", id, mm);
 
 		/* Mark this mm has having no context anymore */
 		mm->context.id = MMU_NO_CONTEXT;
 
-		/* Mark it stale on all CPUs that used this mm */
-		for_each_cpu(cpu, mm_cpumask(mm))
-			__set_bit(id, stale_map[cpu]);
+		/* Mark it stale on all CPUs that used this mm. For threaded
+		 * implementations, we set it on all threads on each core
+		 * represented in the mask. A future implementation will use
+		 * a core map instead but this will do for now.
+		 */
+		for_each_cpu(cpu, mm_cpumask(mm)) {
+			for (i = cpu_first_thread_in_core(cpu);
+			     i <= cpu_last_thread_in_core(cpu); i++)
+				__set_bit(id, stale_map[i]);
+			cpu = i - 1;
+		}
 		return id;
 	}
 
@@ -126,7 +143,7 @@ static unsigned int steal_context_up(unsigned int id)
 	/* Pick up the victim mm */
 	mm = context_mm[id];
 
-	pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+	pr_hardcont(" | steal %d from 0x%p", id, mm);
 
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
@@ -179,19 +196,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	/* No lockless fast path .. yet */
 	spin_lock(&context_lock);
 
-#ifndef DEBUG_STEAL_ONLY
-	pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
-		 cpu, next, next->context.active, next->context.id);
-#endif
+	pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
+		cpu, next, next->context.active, next->context.id);
 
 #ifdef CONFIG_SMP
 	/* Mark us active and the previous one not anymore */
 	next->context.active++;
 	if (prev) {
-#ifndef DEBUG_STEAL_ONLY
-		pr_devel(" old context %p active was: %d\n",
-			 prev, prev->context.active);
-#endif
+		pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active);
 		WARN_ON(prev->context.active < 1);
 		prev->context.active--;
 	}
@@ -201,8 +213,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 
 	/* If we already have a valid assigned context, skip all that */
 	id = next->context.id;
-	if (likely(id != MMU_NO_CONTEXT))
+	if (likely(id != MMU_NO_CONTEXT)) {
+#ifdef DEBUG_MAP_CONSISTENCY
+		if (context_mm[id] != next)
+			pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n",
+			       next, id, id, context_mm[id]);
+#endif
 		goto ctxt_ok;
+	}
 
 	/* We really don't have a context, let's try to acquire one */
 	id = next_context;
@@ -235,11 +253,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next_context = id + 1;
 	context_mm[id] = next;
 	next->context.id = id;
-
-#ifndef DEBUG_STEAL_ONLY
-	pr_devel("[%d] picked up new id %d, nrf is now %d\n",
-		 cpu, id, nr_free_contexts);
-#endif
+	pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts);
 
 	context_check_map();
  ctxt_ok:
@@ -248,15 +262,20 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	 * local TLB for it and unmark it before we use it
 	 */
 	if (test_bit(id, stale_map[cpu])) {
-		pr_devel("[%d] flushing stale context %d for mm @%p !\n",
-			 cpu, id, next);
+		pr_hardcont(" | stale flush %d [%d..%d]",
+			    id, cpu_first_thread_in_core(cpu),
+			    cpu_last_thread_in_core(cpu));
+
 		local_flush_tlb_mm(next);
 
 		/* XXX This clear should ultimately be part of local_flush_tlb_mm */
-		__clear_bit(id, stale_map[cpu]);
+		for (cpu = cpu_first_thread_in_core(cpu);
+		     cpu <= cpu_last_thread_in_core(cpu); cpu++)
+			__clear_bit(id, stale_map[cpu]);
 	}
 
 	/* Flick the MMU and release lock */
+	pr_hardcont(" -> %d\n", id);
 	set_context(id, next->pgd);
 	spin_unlock(&context_lock);
 }
@@ -266,6 +285,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
  */
 int init_new_context(struct task_struct *t, struct mm_struct *mm)
 {
+	pr_hard("initing context for mm @%p\n", mm);
+
 	mm->context.id = MMU_NO_CONTEXT;
 	mm->context.active = 0;
 
@@ -305,7 +326,9 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 					    unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned int)(long)hcpu;
-
+#ifdef CONFIG_HOTPLUG_CPU
+	struct task_struct *p;
+#endif
 	/* We don't touch CPU 0 map, it's allocated at aboot and kept
 	 * around forever
 	 */
@@ -324,8 +347,16 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
 		kfree(stale_map[cpu]);
 		stale_map[cpu] = NULL;
-		break;
-#endif
+
+		/* We also clear the cpu_vm_mask bits of CPUs going away */
+		read_lock(&tasklist_lock);
+		for_each_process(p) {
+			if (p->mm)
+				cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm));
+		}
+		read_unlock(&tasklist_lock);
+	break;
+#endif /* CONFIG_HOTPLUG_CPU */
 	}
 	return NOTIFY_OK;
 }
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index ad2eb4d34dd..d908e75cc3b 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -87,6 +87,12 @@ EXPORT_SYMBOL(local_flush_tlb_page);
 
 static DEFINE_SPINLOCK(tlbivax_lock);
 
+static int mm_is_core_local(struct mm_struct *mm)
+{
+	return cpumask_subset(mm_cpumask(mm),
+			      topology_thread_cpumask(smp_processor_id()));
+}
+
 struct tlb_flush_param {
 	unsigned long addr;
 	unsigned int pid;
@@ -131,7 +137,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 	pid = mm->context.id;
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto no_context;
-	if (!cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
+	if (!mm_is_core_local(mm)) {
 		struct tlb_flush_param p = { .pid = pid };
 		/* Ignores smp_processor_id() even if set. */
 		smp_call_function_many(mm_cpumask(mm),
@@ -153,7 +159,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto bail;
 	cpu_mask = mm_cpumask(vma->vm_mm);
-	if (!cpumask_equal(cpu_mask, cpumask_of(smp_processor_id()))) {
+	if (!mm_is_core_local(mm)) {
 		/* If broadcast tlbivax is supported, use it */
 		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
 			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
-- 
cgit v1.2.3


From 29c09e8fbaf65698c51aeffe34acc284a454a38f Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:11 +0000
Subject: powerpc/mm: Add opcode definitions for tlbivax and tlbsrx.

This adds the opcode definitions to ppc-opcode.h for the two instructions
tlbivax and tlbsrx. as defined by Book3E 2.06

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc-opcode.h | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index b74f16d45cb..ef9aa84cac5 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -48,6 +48,8 @@
 #define PPC_INST_TLBIE			0x7c000264
 #define PPC_INST_TLBILX			0x7c000024
 #define PPC_INST_WAIT			0x7c00007c
+#define PPC_INST_TLBIVAX		0x7c000624
+#define PPC_INST_TLBSRX_DOT		0x7c0006a5
 
 /* macros to insert fields into opcodes */
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
@@ -76,6 +78,10 @@
 					__PPC_WC(w))
 #define PPC_TLBIE(lp,a) 	stringify_in_c(.long PPC_INST_TLBIE | \
 					       __PPC_RB(a) | __PPC_RS(lp))
+#define PPC_TLBSRX_DOT(a,b)	stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
+					__PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBIVAX(a,b)	stringify_in_c(.long PPC_INST_TLBIVAX | \
+					__PPC_RA(a) | __PPC_RB(b))
 
 /*
  * Define what the VSX XX1 form instructions will look like, then add
-- 
cgit v1.2.3


From 1fe1a21005c14ad772caeb9005580f473c4b6c57 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:12 +0000
Subject: powerpc/mm: Add more bit definitions for Book3E MMU registers

This adds various additional bit definitions for various MMU related
SPRs used on Book3E.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h | 168 ++++++++++++++++++++++++----------
 1 file changed, 119 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 7e74cff81d8..42a39b4aace 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -38,58 +38,128 @@
 #define BOOK3E_PAGESZ_1TB	30
 #define BOOK3E_PAGESZ_2TB	31
 
-#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
-#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x)	((x) & 0x00000FFF)
-
-#define MAS1_VALID 	0x80000000
-#define MAS1_IPROT	0x40000000
-#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
-#define MAS1_IND	0x00002000
-#define MAS1_TS		0x00001000
-#define MAS1_TSIZE(x)	((x << 7) & 0x00000F80)
-
-#define MAS2_EPN	0xFFFFF000
-#define MAS2_X0		0x00000040
-#define MAS2_X1		0x00000020
-#define MAS2_W		0x00000010
-#define MAS2_I		0x00000008
-#define MAS2_M		0x00000004
-#define MAS2_G		0x00000002
-#define MAS2_E		0x00000001
+/* MAS registers bit definitions */
+
+#define MAS0_TLBSEL(x)		((x << 28) & 0x30000000)
+#define MAS0_ESEL(x)		((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x)		((x) & 0x00000FFF)
+#define MAS0_HES		0x00004000
+#define MAS0_WQ_ALLWAYS		0x00000000
+#define MAS0_WQ_COND		0x00001000
+#define MAS0_WQ_CLR_RSRV       	0x00002000
+
+#define MAS1_VALID		0x80000000
+#define MAS1_IPROT		0x40000000
+#define MAS1_TID(x)		((x << 16) & 0x3FFF0000)
+#define MAS1_IND		0x00002000
+#define MAS1_TS			0x00001000
+#define MAS1_TSIZE_MASK		0x00000f80
+#define MAS1_TSIZE_SHIFT	7
+#define MAS1_TSIZE(x)		((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK)
+
+#define MAS2_EPN		0xFFFFF000
+#define MAS2_X0			0x00000040
+#define MAS2_X1			0x00000020
+#define MAS2_W			0x00000010
+#define MAS2_I			0x00000008
+#define MAS2_M			0x00000004
+#define MAS2_G			0x00000002
+#define MAS2_E			0x00000001
 #define MAS2_EPN_MASK(size)		(~0 << (size + 10))
 #define MAS2_VAL(addr, size, flags)	((addr) & MAS2_EPN_MASK(size) | (flags))
 
-#define MAS3_RPN	0xFFFFF000
-#define MAS3_U0		0x00000200
-#define MAS3_U1		0x00000100
-#define MAS3_U2		0x00000080
-#define MAS3_U3		0x00000040
-#define MAS3_UX		0x00000020
-#define MAS3_SX		0x00000010
-#define MAS3_UW		0x00000008
-#define MAS3_SW		0x00000004
-#define MAS3_UR		0x00000002
-#define MAS3_SR		0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_INDD	0x00008000
-#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
-#define MAS4_X0D	0x00000040
-#define MAS4_X1D	0x00000020
-#define MAS4_WD		0x00000010
-#define MAS4_ID		0x00000008
-#define MAS4_MD		0x00000004
-#define MAS4_GD		0x00000002
-#define MAS4_ED		0x00000001
-
-#define MAS6_SPID0	0x3FFF0000
-#define MAS6_SPID1	0x00007FFE
-#define MAS6_ISIZE(x)	MAS1_TSIZE(x)
-#define MAS6_SAS	0x00000001
-#define MAS6_SPID	MAS6_SPID0
-
-#define MAS7_RPN	0xFFFFFFFF
+#define MAS3_RPN		0xFFFFF000
+#define MAS3_U0			0x00000200
+#define MAS3_U1			0x00000100
+#define MAS3_U2			0x00000080
+#define MAS3_U3			0x00000040
+#define MAS3_UX			0x00000020
+#define MAS3_SX			0x00000010
+#define MAS3_UW			0x00000008
+#define MAS3_SW			0x00000004
+#define MAS3_UR			0x00000002
+#define MAS3_SR			0x00000001
+#define MAS3_SPSIZE		0x0000003e
+#define MAS3_SPSIZE_SHIFT	1
+
+#define MAS4_TLBSELD(x) 	MAS0_TLBSEL(x)
+#define MAS4_INDD		0x00008000	/* Default IND */
+#define MAS4_TSIZED(x)		MAS1_TSIZE(x)
+#define MAS4_X0D		0x00000040
+#define MAS4_X1D		0x00000020
+#define MAS4_WD			0x00000010
+#define MAS4_ID			0x00000008
+#define MAS4_MD			0x00000004
+#define MAS4_GD			0x00000002
+#define MAS4_ED			0x00000001
+#define MAS4_WIMGED_MASK	0x0000001f	/* Default WIMGE */
+#define MAS4_WIMGED_SHIFT	0
+#define MAS4_VLED		MAS4_X1D	/* Default VLE */
+#define MAS4_ACMD		0x000000c0	/* Default ACM */
+#define MAS4_ACMD_SHIFT		6
+#define MAS4_TSIZED_MASK	0x00000f80	/* Default TSIZE */
+#define MAS4_TSIZED_SHIFT	7
+
+#define MAS6_SPID0		0x3FFF0000
+#define MAS6_SPID1		0x00007FFE
+#define MAS6_ISIZE(x)		MAS1_TSIZE(x)
+#define MAS6_SAS		0x00000001
+#define MAS6_SPID		MAS6_SPID0
+#define MAS6_SIND 		0x00000002	/* Indirect page */
+#define MAS6_SIND_SHIFT		1
+#define MAS6_SPID_MASK		0x3fff0000
+#define MAS6_SPID_SHIFT		16
+#define MAS6_ISIZE_MASK		0x00000f80
+#define MAS6_ISIZE_SHIFT	7
+
+#define MAS7_RPN		0xFFFFFFFF
+
+/* TLBnCFG encoding */
+#define TLBnCFG_N_ENTRY		0x00000fff	/* number of entries */
+#define TLBnCFG_HES		0x00002000	/* HW select supported */
+#define TLBnCFG_IPROT		0x00008000	/* IPROT supported */
+#define TLBnCFG_GTWE		0x00010000	/* Guest can write */
+#define TLBnCFG_IND		0x00020000	/* IND entries supported */
+#define TLBnCFG_PT		0x00040000	/* Can load from page table */
+#define TLBnCFG_ASSOC		0xff000000	/* Associativity */
+
+/* TLBnPS encoding */
+#define TLBnPS_4K		0x00000004
+#define TLBnPS_8K		0x00000008
+#define TLBnPS_16K		0x00000010
+#define TLBnPS_32K		0x00000020
+#define TLBnPS_64K		0x00000040
+#define TLBnPS_128K		0x00000080
+#define TLBnPS_256K		0x00000100
+#define TLBnPS_512K		0x00000200
+#define TLBnPS_1M 		0x00000400
+#define TLBnPS_2M 		0x00000800
+#define TLBnPS_4M 		0x00001000
+#define TLBnPS_8M 		0x00002000
+#define TLBnPS_16M		0x00004000
+#define TLBnPS_32M		0x00008000
+#define TLBnPS_64M		0x00010000
+#define TLBnPS_128M		0x00020000
+#define TLBnPS_256M		0x00040000
+#define TLBnPS_512M		0x00080000
+#define TLBnPS_1G		0x00100000
+#define TLBnPS_2G		0x00200000
+#define TLBnPS_4G		0x00400000
+#define TLBnPS_8G		0x00800000
+#define TLBnPS_16G		0x01000000
+#define TLBnPS_32G		0x02000000
+#define TLBnPS_64G		0x04000000
+#define TLBnPS_128G		0x08000000
+#define TLBnPS_256G		0x10000000
+
+/* tlbilx action encoding */
+#define TLBILX_T_ALL			0
+#define TLBILX_T_TID			1
+#define TLBILX_T_FULLMATCH		3
+#define TLBILX_T_CLASS0			4
+#define TLBILX_T_CLASS1			5
+#define TLBILX_T_CLASS2			6
+#define TLBILX_T_CLASS3			7
 
 #ifndef __ASSEMBLY__
 
-- 
cgit v1.2.3


From a245067e204f69c69abf92d94fc45ec65bf1f07e Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:16 +0000
Subject: powerpc/mm: Add support for early ioremap on non-hash 64-bit
 processors

This adds some code to do early ioremap's using page tables instead of
bolting entries in the hash table. This will be used by the upcoming
64-bits BookE port.

The patch also changes the test for early vs. late ioremap to use
slab_is_available() instead of our old hackish mem_init_done.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable_64.c | 59 ++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 54 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index bfa7db6b2fd..93ed1a3c872 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -33,6 +33,8 @@
 #include <linux/stddef.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
@@ -55,19 +57,36 @@
 
 unsigned long ioremap_bot = IOREMAP_BASE;
 
+
+#ifdef CONFIG_PPC_MMU_NOHASH
+static void *early_alloc_pgtable(unsigned long size)
+{
+	void *pt;
+
+	if (init_bootmem_done)
+		pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
+	else
+		pt = __va(lmb_alloc_base(size, size,
+					 __pa(MAX_DMA_ADDRESS)));
+	memset(pt, 0, size);
+
+	return pt;
+}
+#endif /* CONFIG_PPC_MMU_NOHASH */
+
 /*
- * map_io_page currently only called by __ioremap
- * map_io_page adds an entry to the ioremap page table
+ * map_kernel_page currently only called by __ioremap
+ * map_kernel_page adds an entry to the ioremap page table
  * and adds an entry to the HPT, possibly bolting it
  */
-static int map_io_page(unsigned long ea, unsigned long pa, int flags)
+static int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 
-	if (mem_init_done) {
+	if (slab_is_available()) {
 		pgdp = pgd_offset_k(ea);
 		pudp = pud_alloc(&init_mm, pgdp, ea);
 		if (!pudp)
@@ -81,6 +100,35 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 		set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
 							  __pgprot(flags)));
 	} else {
+#ifdef CONFIG_PPC_MMU_NOHASH
+		/* Warning ! This will blow up if bootmem is not initialized
+		 * which our ppc64 code is keen to do that, we'll need to
+		 * fix it and/or be more careful
+		 */
+		pgdp = pgd_offset_k(ea);
+#ifdef PUD_TABLE_SIZE
+		if (pgd_none(*pgdp)) {
+			pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
+			BUG_ON(pudp == NULL);
+			pgd_populate(&init_mm, pgdp, pudp);
+		}
+#endif /* PUD_TABLE_SIZE */
+		pudp = pud_offset(pgdp, ea);
+		if (pud_none(*pudp)) {
+			pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
+			BUG_ON(pmdp == NULL);
+			pud_populate(&init_mm, pudp, pmdp);
+		}
+		pmdp = pmd_offset(pudp, ea);
+		if (!pmd_present(*pmdp)) {
+			ptep = early_alloc_pgtable(PAGE_SIZE);
+			BUG_ON(ptep == NULL);
+			pmd_populate_kernel(&init_mm, pmdp, ptep);
+		}
+		ptep = pte_offset_kernel(pmdp, ea);
+		set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
+							  __pgprot(flags)));
+#else /* CONFIG_PPC_MMU_NOHASH */
 		/*
 		 * If the mm subsystem is not fully up, we cannot create a
 		 * linux page table entry for this mapping.  Simply bolt an
@@ -93,6 +141,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 			       "memory at %016lx !\n", pa);
 			return -ENOMEM;
 		}
+#endif /* !CONFIG_PPC_MMU_NOHASH */
 	}
 	return 0;
 }
@@ -124,7 +173,7 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
 	WARN_ON(size & ~PAGE_MASK);
 
 	for (i = 0; i < size; i += PAGE_SIZE)
-		if (map_io_page((unsigned long)ea+i, pa+i, flags))
+		if (map_kernel_page((unsigned long)ea+i, pa+i, flags))
 			return NULL;
 
 	return (void __iomem *)ea;
-- 
cgit v1.2.3


From 44c58ccc8dc25f78a4f641901f17092c93dd0458 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:20 +0000
Subject: powerpc: Modify some ppc_asm.h macros to accomodate 64-bits Book3E

The way I intend to use tophys/tovirt on 64-bit BookE is different
from the "trick" that we currently play for 32-bit BookE so change
the condition of definition of these macros to make it so.

Also, make sure we only use rfid and mtmsrd instead of rfi and mtmsr
for 64-bit server processors, not all 64-bit processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc_asm.h | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index f9729529c20..dfae6e916df 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -375,8 +375,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #define PPC440EP_ERR42
 #endif
 
-
-#if defined(CONFIG_BOOKE)
+/*
+ * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them
+ * keep the address intact to be compatible with code shared with
+ * 32-bit classic.
+ *
+ * On the other hand, I find it useful to have them behave as expected
+ * by their name (ie always do the addition) on 64-bit BookE
+ */
+#if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64)
 #define toreal(rd)
 #define fromreal(rd)
 
@@ -426,10 +433,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 	.previous
 #endif
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #define RFI		rfid
 #define MTMSRD(r)	mtmsrd	r
-
 #else
 #define FIX_SRR1(ra, rb)
 #ifndef CONFIG_40x
-- 
cgit v1.2.3


From d4e167da4cb60910f6ac305aee03714937f70b71 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:24 +0000
Subject: powerpc/mm: Make low level TLB flush ops on BookE take additional
 args

We need to pass down whether the page is direct or indirect and we'll
need to pass the page size to _tlbil_va and _tlbivax_bcast

We also add a new low level _tlbil_pid_noind() which does a TLB flush
by PID but avoids flushing indirect entries if possible

This implements those new prototypes but defines them with inlines
or macros so that no additional arguments are actually passed on current
processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/tlbflush.h | 11 ++++++++--
 arch/powerpc/mm/mmu_decl.h          | 16 +++++++++++---
 arch/powerpc/mm/tlb_nohash.c        | 42 +++++++++++++++++++++++++++----------
 arch/powerpc/mm/tlb_nohash_low.S    |  6 +++---
 4 files changed, 56 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index abbe3419d1d..d50a380b2b6 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -6,7 +6,7 @@
  *
  *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
  *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - local_flush_tlb_mm(mm) flushes the specified mm context on
+ *  - local_flush_tlb_mm(mm, full) flushes the specified mm context on
  *                           the local processor
  *  - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor
  *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
@@ -29,7 +29,8 @@
  * specific tlbie's
  */
 
-#include <linux/mm.h>
+struct vm_area_struct;
+struct mm_struct;
 
 #define MMU_NO_CONTEXT      	((unsigned int)-1)
 
@@ -40,12 +41,18 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
 extern void local_flush_tlb_mm(struct mm_struct *mm);
 extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
 
+extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+				   int tsize, int ind);
+
 #ifdef CONFIG_SMP
 extern void flush_tlb_mm(struct mm_struct *mm);
 extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+			     int tsize, int ind);
 #else
 #define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
 #define flush_tlb_page(vma,addr)	local_flush_tlb_page(vma,addr)
+#define __flush_tlb_page(mm,addr,p,i)	__local_flush_tlb_page(mm,addr,p,i)
 #endif
 #define flush_tlb_page_nohash(vma,addr)	flush_tlb_page(vma,addr)
 
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d1f9c62dc17..3871dceee2d 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -36,21 +36,30 @@ static inline void _tlbil_pid(unsigned int pid)
 {
 	asm volatile ("sync; tlbia; isync" : : : "memory");
 }
+#define _tlbil_pid_noind(pid)	_tlbil_pid(pid)
+
 #else /* CONFIG_40x || CONFIG_8xx */
 extern void _tlbil_all(void);
 extern void _tlbil_pid(unsigned int pid);
+#define _tlbil_pid_noind(pid)	_tlbil_pid(pid)
 #endif /* !(CONFIG_40x || CONFIG_8xx) */
 
 /*
  * On 8xx, we directly inline tlbie, on others, it's extern
  */
 #ifdef CONFIG_8xx
-static inline void _tlbil_va(unsigned long address, unsigned int pid)
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+			     unsigned int tsize, unsigned int ind)
 {
 	asm volatile ("tlbie %0; sync" : : "r" (address) : "memory");
 }
 #else /* CONFIG_8xx */
-extern void _tlbil_va(unsigned long address, unsigned int pid);
+extern void __tlbil_va(unsigned long address, unsigned int pid);
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+			     unsigned int tsize, unsigned int ind)
+{
+	__tlbil_va(address, pid);
+}
 #endif /* CONIFG_8xx */
 
 /*
@@ -58,7 +67,8 @@ extern void _tlbil_va(unsigned long address, unsigned int pid);
  * implementation. When that becomes the case, this will be
  * an extern.
  */
-static inline void _tlbivax_bcast(unsigned long address, unsigned int pid)
+static inline void _tlbivax_bcast(unsigned long address, unsigned int pid,
+				   unsigned int tsize, unsigned int ind)
 {
 	BUG();
 }
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index d908e75cc3b..761e8882416 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -67,18 +67,24 @@ void local_flush_tlb_mm(struct mm_struct *mm)
 }
 EXPORT_SYMBOL(local_flush_tlb_mm);
 
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+			    int tsize, int ind)
 {
 	unsigned int pid;
 
 	preempt_disable();
-	pid = vma ? vma->vm_mm->context.id : 0;
+	pid = mm ? mm->context.id : 0;
 	if (pid != MMU_NO_CONTEXT)
-		_tlbil_va(vmaddr, pid);
+		_tlbil_va(vmaddr, pid, tsize, ind);
 	preempt_enable();
 }
-EXPORT_SYMBOL(local_flush_tlb_page);
 
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	__local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+			       0 /* tsize unused for now */, 0);
+}
+EXPORT_SYMBOL(local_flush_tlb_page);
 
 /*
  * And here are the SMP non-local implementations
@@ -96,6 +102,8 @@ static int mm_is_core_local(struct mm_struct *mm)
 struct tlb_flush_param {
 	unsigned long addr;
 	unsigned int pid;
+	unsigned int tsize;
+	unsigned int ind;
 };
 
 static void do_flush_tlb_mm_ipi(void *param)
@@ -109,7 +117,7 @@ static void do_flush_tlb_page_ipi(void *param)
 {
 	struct tlb_flush_param *p = param;
 
-	_tlbil_va(p->addr, p->pid);
+	_tlbil_va(p->addr, p->pid, p->tsize, p->ind);
 }
 
 
@@ -149,37 +157,49 @@ void flush_tlb_mm(struct mm_struct *mm)
 }
 EXPORT_SYMBOL(flush_tlb_mm);
 
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+		      int tsize, int ind)
 {
 	struct cpumask *cpu_mask;
 	unsigned int pid;
 
 	preempt_disable();
-	pid = vma ? vma->vm_mm->context.id : 0;
+	pid = mm ? mm->context.id : 0;
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto bail;
-	cpu_mask = mm_cpumask(vma->vm_mm);
+	cpu_mask = mm_cpumask(mm);
 	if (!mm_is_core_local(mm)) {
 		/* If broadcast tlbivax is supported, use it */
 		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
 			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
 			if (lock)
 				spin_lock(&tlbivax_lock);
-			_tlbivax_bcast(vmaddr, pid);
+			_tlbivax_bcast(vmaddr, pid, tsize, ind);
 			if (lock)
 				spin_unlock(&tlbivax_lock);
 			goto bail;
 		} else {
-			struct tlb_flush_param p = { .pid = pid, .addr = vmaddr };
+			struct tlb_flush_param p = {
+				.pid = pid,
+				.addr = vmaddr,
+				.tsize = tsize,
+				.ind = ind,
+			};
 			/* Ignores smp_processor_id() even if set in cpu_mask */
 			smp_call_function_many(cpu_mask,
 					       do_flush_tlb_page_ipi, &p, 1);
 		}
 	}
-	_tlbil_va(vmaddr, pid);
+	_tlbil_va(vmaddr, pid, tsize, ind);
  bail:
 	preempt_enable();
 }
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+			 0 /* tsize unused for now */, 0);
+}
 EXPORT_SYMBOL(flush_tlb_page);
 
 #endif /* CONFIG_SMP */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 3037911279b..c7d89a0adba 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -39,7 +39,7 @@
 /*
  * 40x implementation needs only tlbil_va
  */
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
 	/* We run the search with interrupts disabled because we have to change
 	 * the PID and I don't want to preempt when that happens.
 	 */
@@ -71,7 +71,7 @@ _GLOBAL(_tlbil_va)
  * 440 implementation uses tlbsx/we for tlbil_va and a full sweep
  * of the TLB for everything else.
  */
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
 	mfspr	r5,SPRN_MMUCR
 	rlwimi	r5,r4,0,24,31			/* Set TID */
 
@@ -170,7 +170,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX)
  * Flush MMU TLB for a particular address, but only on the local processor
  * (no broadcast)
  */
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
 	mfmsr	r10
 	wrteei	0
 	slwi	r4,r4,16
-- 
cgit v1.2.3


From 6f0ef0f505af1ce6e9756087a9d4cc3778bae8c6 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:26 +0000
Subject: powerpc/mm: Call mmu_context_init() from ppc64

Our 64-bit hash context handling has no init function, but 64-bit Book3E
will use the common mmu_context_nohash.c code which does, so define an
empty inline mmu_context_init() for 64-bit server and call it from
our 64-bit setup_arch()

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu_context.h | 7 ++++++-
 arch/powerpc/kernel/setup_64.c         | 4 ++++
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index b7063669f97..8dffed31701 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -14,7 +14,6 @@
 /*
  * Most if the context management is out of line
  */
-extern void mmu_context_init(void);
 extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 extern void destroy_context(struct mm_struct *mm);
 
@@ -23,6 +22,12 @@ extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
 extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
 extern void set_context(unsigned long id, pgd_t *pgd);
 
+#ifdef CONFIG_PPC_BOOK3S_64
+static inline void mmu_context_init(void) { }
+#else
+extern void mmu_context_init(void);
+#endif
+
 /*
  * switch_mm is the entry point called from the architecture independent
  * code in kernel/sched.c
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 91b89b8d63d..325dc5b2e62 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -534,6 +534,10 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	paging_init();
+
+	/* Initialize the MMU context management stuff */
+	mmu_context_init();
+
 	ppc64_boot_msg(0x15, "Setup Done");
 }
 
-- 
cgit v1.2.3


From 747bea91b764aefd59091ebff80f182282f1d23c Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:27 +0000
Subject: powerpc: Clean ifdef usage in copy_thread()

Currently, a single ifdef covers SLB related bits and more generic ppc64
related bits, split this in two separate ifdef's since 64-bit BookE will
need one but not the other.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/process.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 892a9f2e6d7..678ff132e8b 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -664,6 +664,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		sp_vsid |= SLB_VSID_KERNEL | llp;
 		p->thread.ksp_vsid = sp_vsid;
 	}
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 	/*
 	 * The PPC64 ABI makes use of a TOC to contain function 
@@ -671,6 +672,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	 * to the TOC entry.  The first entry is a pointer to the actual
 	 * function.
  	 */
+#ifdef CONFIG_PPC64
 	kregs->nip = *((unsigned long *)ret_from_fork);
 #else
 	kregs->nip = (unsigned long)ret_from_fork;
-- 
cgit v1.2.3


From cf54dc7cd4f9aab55cd3e1794b0b74c3c88cd1a0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:28 +0000
Subject: powerpc: Move definitions of secondary CPU spinloop to header file

Those definitions are currently declared extern in the .c file where
they are used, move them to a header file instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/smp.h            | 9 +++++++++
 arch/powerpc/kernel/prom_init.c           | 4 ----
 arch/powerpc/kernel/setup_64.c            | 3 ---
 arch/powerpc/platforms/85xx/smp.c         | 1 -
 arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1 -
 arch/powerpc/platforms/cell/smp.c         | 2 --
 arch/powerpc/platforms/pseries/smp.c      | 2 --
 7 files changed, 9 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index c25f73d1d84..e782f43ee66 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -148,6 +148,15 @@ extern struct smp_ops_t *smp_ops;
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi(cpumask_t mask);
 
+/* Definitions relative to the secondary CPU spin loop
+ * and entry point. Not all of them exist on both 32 and
+ * 64-bit but defining them all here doesn't harm
+ */
+extern void generic_secondary_smp_init(void);
+extern unsigned long __secondary_hold_spinloop;
+extern unsigned long __secondary_hold_acknowledge;
+extern char __secondary_hold;
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index a538824616f..d942404779c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1259,10 +1259,6 @@ static void __init prom_initialize_tce_table(void)
  *
  * -- Cort
  */
-extern char __secondary_hold;
-extern unsigned long __secondary_hold_spinloop;
-extern unsigned long __secondary_hold_acknowledge;
-
 /*
  * We want to reference the copy of __secondary_hold_* in the
  * 0 - 0x100 address range
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 325dc5b2e62..a6b6c4c9ae4 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -230,9 +230,6 @@ void early_setup_secondary(void)
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
-extern unsigned long __secondary_hold_spinloop;
-extern void generic_secondary_smp_init(void);
-
 void smp_release_cpus(void)
 {
 	unsigned long *ptr;
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 62c592ede64..9f526ba31c1 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -25,7 +25,6 @@
 
 #include <sysdev/fsl_soc.h>
 
-extern volatile unsigned long __secondary_hold_acknowledge;
 extern void __early_start(void);
 
 #define BOOT_ENTRY_ADDR_UPPER	0
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index d84bbb508ee..eacea0e3fcc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -27,7 +27,6 @@
 #include "mpc86xx.h"
 
 extern void __secondary_start_mpc86xx(void);
-extern unsigned long __secondary_hold_acknowledge;
 
 #define MCM_PORT_CONFIG_OFFSET	0x10
 
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index bc97fada48c..f774530075b 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -58,8 +58,6 @@
  */
 static cpumask_t of_spin_map;
 
-extern void generic_secondary_smp_init(unsigned long);
-
 /**
  * smp_startup_cpu() - start the given cpu
  *
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1f8f6cfb94f..440000cc713 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -56,8 +56,6 @@
  */
 static cpumask_t of_spin_map;
 
-extern void generic_secondary_smp_init(unsigned long);
-
 /**
  * smp_startup_cpu() - start the given cpu
  *
-- 
cgit v1.2.3


From c7cc58a1ad8dfe3c199d3b6ce50412b86dd3edaf Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:28 +0000
Subject: powerpc/mm: Rework & cleanup page table freeing code path

That patch used to just add a hook to page table flushing but
pulling that string brought out a whole bunch of issues, so it
now does that and more:

 - We now make the RCU batching of page freeing SMP only, as I
believe it was intended initially. We make a few more things compile
to nothing on !CONFIG_SMP

 - Some macros are turned into functions, though that forced me to
out of line a few stuffs due to unsolvable include depenencies,
however it's probably better that way anyway, it's not -that-
critical code path.

 - 32-bit didn't call pte_free_finish() on tlb_flush() which means
that it wouldn't push out the batch to RCU for delayed freeing when
a bunch of page tables have been freed, they would just stay in there
until the batch gets full.

64-bit BookE will use that hook to maintain the virtually linear
page tables or the indirect entries in the TLB when using the
HW loader.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgalloc.h | 39 +++++++++++++++++++++++++++-----------
 arch/powerpc/include/asm/tlb.h     | 38 +++----------------------------------
 arch/powerpc/mm/pgtable.c          | 10 ++++++++++
 arch/powerpc/mm/tlb_hash32.c       |  3 +++
 arch/powerpc/mm/tlb_hash64.c       | 15 +++++++++++++++
 arch/powerpc/mm/tlb_nohash.c       |  8 ++++++++
 6 files changed, 67 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 1730e5e298d..34b080671f0 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -4,6 +4,15 @@
 
 #include <linux/mm.h>
 
+#ifdef CONFIG_PPC_BOOK3E
+extern void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address);
+#else /* CONFIG_PPC_BOOK3E */
+static inline void tlb_flush_pgtable(struct mmu_gather *tlb,
+				     unsigned long address)
+{
+}
+#endif /* !CONFIG_PPC_BOOK3E */
+
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 {
 	free_page((unsigned long)pte);
@@ -35,19 +44,27 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 #include <asm/pgalloc-32.h>
 #endif
 
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-
 #ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage,address)		\
-do { \
-	pgtable_page_dtor(ptepage); \
-	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-					PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
-} while (0)
-#else
-#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, (pte))
-#endif
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+extern void pte_free_finish(void);
+#else /* CONFIG_SMP */
+static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+{
+	pgtable_free(pgf);
+}
+static inline void pte_free_finish(void) { }
+#endif /* !CONFIG_SMP */
 
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage,
+				  unsigned long address)
+{
+	pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage),
+						PTE_NONCACHE_NUM,
+						PTE_TABLE_SIZE-1);
+	tlb_flush_pgtable(tlb, address);
+	pgtable_page_dtor(ptepage);
+	pgtable_free_tlb(tlb, pgf);
+}
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index e20ff7541f3..e2b428b0f7b 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -25,57 +25,25 @@
 
 #include <linux/pagemap.h>
 
-struct mmu_gather;
-
 #define tlb_start_vma(tlb, vma)	do { } while (0)
 #define tlb_end_vma(tlb, vma)	do { } while (0)
 
-#if !defined(CONFIG_PPC_STD_MMU)
-
-#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
-
-#elif defined(__powerpc64__)
-
-extern void pte_free_finish(void);
-
-static inline void tlb_flush(struct mmu_gather *tlb)
-{
-	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
-
-	/* If there's a TLB batch pending, then we must flush it because the
-	 * pages are going to be freed and we really don't want to have a CPU
-	 * access a freed page because it has a stale TLB
-	 */
-	if (tlbbatch->index)
-		__flush_tlb_pending(tlbbatch);
-
-	pte_free_finish();
-}
-
-#else
-
 extern void tlb_flush(struct mmu_gather *tlb);
 
-#endif
-
 /* Get the generic bits... */
 #include <asm-generic/tlb.h>
 
-#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
-
-#else
 extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
 			     unsigned long address);
 
 static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
-					unsigned long address)
+					  unsigned long address)
 {
+#ifdef CONFIG_PPC_STD_MMU_32
 	if (pte_val(*ptep) & _PAGE_HASHPTE)
 		flush_hash_entry(tlb->mm, ptep, address);
+#endif
 }
 
-#endif
 #endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_TLB_H */
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 627767d6169..a65979a5f75 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,14 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
+#ifdef CONFIG_SMP
+
+/*
+ * Handle batching of page table freeing on SMP. Page tables are
+ * queued up and send to be freed later by RCU in order to avoid
+ * freeing a page table page that is being walked without locks
+ */
+
 static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
 static unsigned long pte_freelist_forced_free;
 
@@ -116,6 +124,8 @@ void pte_free_finish(void)
 	*batchp = NULL;
 }
 
+#endif /* CONFIG_SMP */
+
 /*
  * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
  */
diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c
index 65190587a36..8aaa8b7eb32 100644
--- a/arch/powerpc/mm/tlb_hash32.c
+++ b/arch/powerpc/mm/tlb_hash32.c
@@ -71,6 +71,9 @@ void tlb_flush(struct mmu_gather *tlb)
 		 */
 		_tlbia();
 	}
+
+	/* Push out batch of freed page tables */
+	pte_free_finish();
 }
 
 /*
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 937eb90677d..8e35a606693 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -154,6 +154,21 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
 	batch->index = 0;
 }
 
+void tlb_flush(struct mmu_gather *tlb)
+{
+	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
+
+	/* If there's a TLB batch pending, then we must flush it because the
+	 * pages are going to be freed and we really don't want to have a CPU
+	 * access a freed page because it has a stale TLB
+	 */
+	if (tlbbatch->index)
+		__flush_tlb_pending(tlbbatch);
+
+	/* Push out batch of freed page tables */
+	pte_free_finish();
+}
+
 /**
  * __flush_hash_table_range - Flush all HPTEs for a given address range
  *                            from the hash table (and the TLB). But keeps
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 761e8882416..6b43fc49f10 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -233,3 +233,11 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	flush_tlb_mm(vma->vm_mm);
 }
 EXPORT_SYMBOL(flush_tlb_range);
+
+void tlb_flush(struct mmu_gather *tlb)
+{
+	flush_tlb_mm(tlb->mm);
+
+	/* Push out batch of freed page tables */
+	pte_free_finish();
+}
-- 
cgit v1.2.3


From 0257c99cdfaca53a881339e1cbca638c61569b05 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:34 +0000
Subject: powerpc: Add SPR definitions for new 64-bit BookE

This adds various SPRs defined on 64-bit BookE, along with changes
to the definition of the base MSR values to add the values needed
for 64-bit Book3E.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg.h       | 10 +++------
 arch/powerpc/include/asm/reg_booke.h | 42 +++++++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 2cedbb42761..c8715331e1b 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -98,19 +98,15 @@
 #define MSR_RI		__MASK(MSR_RI_LG)	/* Recoverable Exception */
 #define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
 
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC_BOOK3S_64)
+/* Server variant */
 #define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
 #define MSR_KERNEL      MSR_ | MSR_SF
-
 #define MSR_USER32	MSR_ | MSR_PR | MSR_EE
 #define MSR_USER64	MSR_USER32 | MSR_SF
-
-#else /* 32-bit */
+#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
 /* Default MSR for kernel mode. */
-#ifndef MSR_KERNEL	/* reg_booke.h also defines this */
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
-#endif
-
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
 #endif
 
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 6bcf364cbb2..2c9c706e644 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -18,18 +18,26 @@
 #define MSR_IS		MSR_IR	/* Instruction Space */
 #define MSR_DS		MSR_DR	/* Data Space */
 #define MSR_PMM		(1<<2)	/* Performance monitor mark bit */
+#define MSR_CM		(1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */
 
-/* Default MSR for kernel mode. */
-#if defined (CONFIG_40x)
+#if defined(CONFIG_PPC_BOOK3E_64)
+#define MSR_		MSR_ME | MSR_CE
+#define MSR_KERNEL      MSR_ | MSR_CM
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
+#define MSR_USER64	MSR_USER32 | MSR_CM
+#elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#elif defined(CONFIG_BOOKE)
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
+#else
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_CE)
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
 #endif
 
 /* Special Purpose Registers (SPRNs)*/
 #define SPRN_DECAR	0x036	/* Decrementer Auto Reload Register */
 #define SPRN_IVPR	0x03F	/* Interrupt Vector Prefix Register */
 #define SPRN_USPRG0	0x100	/* User Special Purpose Register General 0 */
+#define SPRN_SPRG3R	0x103	/* Special Purpose Register General 3 Read */
 #define SPRN_SPRG4R	0x104	/* Special Purpose Register General 4 Read */
 #define SPRN_SPRG5R	0x105	/* Special Purpose Register General 5 Read */
 #define SPRN_SPRG6R	0x106	/* Special Purpose Register General 6 Read */
@@ -38,11 +46,18 @@
 #define SPRN_SPRG5W	0x115	/* Special Purpose Register General 5 Write */
 #define SPRN_SPRG6W	0x116	/* Special Purpose Register General 6 Write */
 #define SPRN_SPRG7W	0x117	/* Special Purpose Register General 7 Write */
+#define SPRN_EPCR	0x133	/* Embedded Processor Control Register */
 #define SPRN_DBCR2	0x136	/* Debug Control Register 2 */
 #define SPRN_IAC3	0x13A	/* Instruction Address Compare 3 */
 #define SPRN_IAC4	0x13B	/* Instruction Address Compare 4 */
 #define SPRN_DVC1	0x13E	/* Data Value Compare Register 1 */
 #define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
+#define SPRN_MAS8	0x155	/* MMU Assist Register 8 */
+#define SPRN_TLB0PS	0x158	/* TLB 0 Page Size Register */
+#define SPRN_MAS5_MAS6	0x15c	/* MMU Assist Register 5 || 6 */
+#define SPRN_MAS8_MAS1	0x15d	/* MMU Assist Register 8 || 1 */
+#define SPRN_MAS7_MAS3	0x174	/* MMU Assist Register 7 || 3 */
+#define SPRN_MAS0_MAS1	0x175	/* MMU Assist Register 0 || 1 */
 #define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
 #define SPRN_IVOR1	0x191	/* Interrupt Vector Offset Register 1 */
 #define SPRN_IVOR2	0x192	/* Interrupt Vector Offset Register 2 */
@@ -425,6 +440,27 @@
 #define SGR_NORMAL	0		/* Speculative fetching allowed. */
 #define SGR_GUARDED	1		/* Speculative fetching disallowed. */
 
+/* Bit definitions for EPCR */
+#define SPRN_EPCR_EXTGS		0x80000000	/* External Input interrupt
+						 * directed to Guest state */
+#define SPRN_EPCR_DTLBGS	0x40000000	/* Data TLB Error interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_ITLBGS	0x20000000	/* Instr. TLB error interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_DSIGS		0x10000000	/* Data Storage interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_ISIGS		0x08000000	/* Instr. Storage interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_DUVD		0x04000000	/* Disable Hypervisor Debug */
+#define SPRN_EPCR_ICM		0x02000000	/* Interrupt computation mode
+						 * (copied to MSR:CM on intr) */
+#define SPRN_EPCR_GICM		0x01000000	/* Guest Interrupt Comp. mode */
+#define SPRN_EPCR_DGTMI		0x00800000	/* Disable TLB Guest Management
+						 * instructions */
+#define SPRN_EPCR_DMIUH		0x00400000	/* Disable MAS Interrupt updates
+						 * for hypervisor */
+
+
 /*
  * The IBM-403 is an even more odd special case, as it is much
  * older than the IBM-405 series.  We put these down here incase someone
-- 
cgit v1.2.3


From 57e2a99f74b0d3720c97a6aadb57ae6aad3c61ea Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 28 Jul 2009 11:59:34 +1000
Subject: powerpc: Add memory management headers for new 64-bit BookE

This adds the PTE and pgtable format definitions, along with changes
to the kernel memory map and other definitions related to implementing
support for 64-bit Book3E. This also shields some asm-offset bits that
are currently only relevant on 32-bit

We also move the definition of the "linux" page size constants to
the common mmu.h file and add a few sizes that are relevant to
embedded processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h    | 27 ++++++++++++
 arch/powerpc/include/asm/mmu-hash64.h    | 20 ---------
 arch/powerpc/include/asm/mmu.h           | 37 +++++++++++++++++
 arch/powerpc/include/asm/page.h          |  4 ++
 arch/powerpc/include/asm/page_64.h       | 10 +++++
 arch/powerpc/include/asm/pgtable-ppc64.h | 61 ++++++++++++++++++++--------
 arch/powerpc/include/asm/pte-book3e.h    | 70 ++++++++++++++++++++++++++++++++
 arch/powerpc/include/asm/pte-common.h    |  3 ++
 arch/powerpc/kernel/asm-offsets.c        |  5 ++-
 arch/powerpc/mm/hugetlbpage.c            |  8 +++-
 10 files changed, 205 insertions(+), 40 deletions(-)
 create mode 100644 arch/powerpc/include/asm/pte-book3e.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 42a39b4aace..6ddbe48d07f 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -170,6 +170,33 @@ typedef struct {
 	unsigned int	active;
 	unsigned long	vdso_base;
 } mm_context_t;
+
+/* Page size definitions, common between 32 and 64-bit
+ *
+ *    shift : is the "PAGE_SHIFT" value for that page size
+ *    penc  : is the pte encoding mask
+ *
+ */
+struct mmu_psize_def
+{
+	unsigned int	shift;	/* number of bits */
+	unsigned int	enc;	/* PTE encoding */
+};
+extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+
+/* The page sizes use the same names as 64-bit hash but are
+ * constants
+ */
+#if defined(CONFIG_PPC_4K_PAGES)
+#define mmu_virtual_psize	MMU_PAGE_4K
+#elif defined(CONFIG_PPC_64K_PAGES)
+#define mmu_virtual_psize	MMU_PAGE_64K
+#else
+#error Unsupported page size
+#endif
+
+extern int mmu_linear_psize;
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 98c104a0996..b537903b9fc 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -138,26 +138,6 @@ struct mmu_psize_def
 
 #endif /* __ASSEMBLY__ */
 
-/*
- * The kernel use the constants below to index in the page sizes array.
- * The use of fixed constants for this purpose is better for performances
- * of the low level hash refill handlers.
- *
- * A non supported page size has a "shift" field set to 0
- *
- * Any new page size being implemented can get a new entry in here. Whether
- * the kernel will use it or not is a different matter though. The actual page
- * size used by hugetlbfs is not defined here and may be made variable
- */
-
-#define MMU_PAGE_4K		0	/* 4K */
-#define MMU_PAGE_64K		1	/* 64K */
-#define MMU_PAGE_64K_AP		2	/* 64K Admixed (in a 4K segment) */
-#define MMU_PAGE_1M		3	/* 1M */
-#define MMU_PAGE_16M		4	/* 16M */
-#define MMU_PAGE_16G		5	/* 16G */
-#define MMU_PAGE_COUNT		6
-
 /*
  * Segment sizes.
  * These are the values used by hardware in the B field of
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index fb57ded592f..2fcfefc6089 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -17,6 +17,7 @@
 #define MMU_FTR_TYPE_40x		ASM_CONST(0x00000004)
 #define MMU_FTR_TYPE_44x		ASM_CONST(0x00000008)
 #define MMU_FTR_TYPE_FSL_E		ASM_CONST(0x00000010)
+#define MMU_FTR_TYPE_3E			ASM_CONST(0x00000020)
 
 /*
  * This is individual features
@@ -73,6 +74,41 @@ extern void early_init_mmu_secondary(void);
 
 #endif /* !__ASSEMBLY__ */
 
+/* The kernel use the constants below to index in the page sizes array.
+ * The use of fixed constants for this purpose is better for performances
+ * of the low level hash refill handlers.
+ *
+ * A non supported page size has a "shift" field set to 0
+ *
+ * Any new page size being implemented can get a new entry in here. Whether
+ * the kernel will use it or not is a different matter though. The actual page
+ * size used by hugetlbfs is not defined here and may be made variable
+ *
+ * Note: This array ended up being a false good idea as it's growing to the
+ * point where I wonder if we should replace it with something different,
+ * to think about, feedback welcome. --BenH.
+ */
+
+/* There are #define as they have to be used in assembly
+ *
+ * WARNING: If you change this list, make sure to update the array of
+ * names currently in arch/powerpc/mm/hugetlbpage.c or bad things will
+ * happen
+ */
+#define MMU_PAGE_4K	0
+#define MMU_PAGE_16K	1
+#define MMU_PAGE_64K	2
+#define MMU_PAGE_64K_AP	3	/* "Admixed pages" (hash64 only) */
+#define MMU_PAGE_256K	4
+#define MMU_PAGE_1M	5
+#define MMU_PAGE_8M	6
+#define MMU_PAGE_16M	7
+#define MMU_PAGE_256M	8
+#define MMU_PAGE_1G	9
+#define MMU_PAGE_16G	10
+#define MMU_PAGE_64G	11
+#define MMU_PAGE_COUNT	12
+
 
 #if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */
@@ -94,5 +130,6 @@ extern void early_init_mmu_secondary(void);
 #  include <asm/mmu-8xx.h>
 #endif
 
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 4940662ee87..ff24254990e 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -139,7 +139,11 @@ extern phys_addr_t kernstart_addr;
  * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
  * "kernelness", use is_kernel_addr() - it should do what you want.
  */
+#ifdef CONFIG_PPC_BOOK3E_64
+#define is_kernel_addr(x)	((x) >= 0x8000000000000000ul)
+#else
 #define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
+#endif
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 5817a3b747e..3f17b83f55a 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -135,12 +135,22 @@ extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
 #endif /* __ASSEMBLY__ */
 #else
 #define slice_init()
+#ifdef CONFIG_PPC_STD_MMU_64
 #define get_slice_psize(mm, addr)	((mm)->context.user_psize)
 #define slice_set_user_psize(mm, psize)		\
 do {						\
 	(mm)->context.user_psize = (psize);	\
 	(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
 } while (0)
+#else /* CONFIG_PPC_STD_MMU_64 */
+#ifdef CONFIG_PPC_64K_PAGES
+#define get_slice_psize(mm, addr)	MMU_PAGE_64K
+#else /* CONFIG_PPC_64K_PAGES */
+#define get_slice_psize(mm, addr)	MMU_PAGE_4K
+#endif /* !CONFIG_PPC_64K_PAGES */
+#define slice_set_user_psize(mm, psize)	do { BUG(); } while(0)
+#endif /* !CONFIG_PPC_STD_MMU_64 */
+
 #define slice_set_range_psize(mm, start, len, psize)	\
 	slice_set_user_psize((mm), (psize))
 #define slice_mm_new_context(mm)	1
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 8cd083c6150..7254c5a3187 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -5,11 +5,6 @@
  * the ppc64 hashed page table.
  */
 
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <asm/tlbflush.h>
-#endif /* __ASSEMBLY__ */
-
 #ifdef CONFIG_PPC_64K_PAGES
 #include <asm/pgtable-ppc64-64k.h>
 #else
@@ -38,26 +33,46 @@
 #endif
 
 /*
- * Define the address range of the vmalloc VM area.
+ * Define the address range of the kernel non-linear virtual area
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+#define KERN_VIRT_START ASM_CONST(0x8000000000000000)
+#else
+#define KERN_VIRT_START ASM_CONST(0xD000000000000000)
+#endif
+#define KERN_VIRT_SIZE	PGTABLE_RANGE
+
+/*
+ * The vmalloc space starts at the beginning of that region, and
+ * occupies half of it on hash CPUs and a quarter of it on Book3E
  */
-#define VMALLOC_START ASM_CONST(0xD000000000000000)
-#define VMALLOC_SIZE  (PGTABLE_RANGE >> 1)
-#define VMALLOC_END   (VMALLOC_START + VMALLOC_SIZE)
+#define VMALLOC_START	KERN_VIRT_START
+#ifdef CONFIG_PPC_BOOK3E
+#define VMALLOC_SIZE	(KERN_VIRT_SIZE >> 2)
+#else
+#define VMALLOC_SIZE	(KERN_VIRT_SIZE >> 1)
+#endif
+#define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
 
 /*
- * Define the address ranges for MMIO and IO space :
+ * The second half of the kernel virtual space is used for IO mappings,
+ * it's itself carved into the PIO region (ISA and PHB IO space) and
+ * the ioremap space
  *
- *  ISA_IO_BASE = VMALLOC_END, 64K reserved area
+ *  ISA_IO_BASE = KERN_IO_START, 64K reserved area
  *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
  * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
  */
+#define KERN_IO_START	(KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))
 #define FULL_IO_SIZE	0x80000000ul
-#define  ISA_IO_BASE	(VMALLOC_END)
-#define  ISA_IO_END	(VMALLOC_END + 0x10000ul)
+#define  ISA_IO_BASE	(KERN_IO_START)
+#define  ISA_IO_END	(KERN_IO_START + 0x10000ul)
 #define  PHB_IO_BASE	(ISA_IO_END)
-#define  PHB_IO_END	(VMALLOC_END + FULL_IO_SIZE)
+#define  PHB_IO_END	(KERN_IO_START + FULL_IO_SIZE)
 #define IOREMAP_BASE	(PHB_IO_END)
-#define IOREMAP_END	(VMALLOC_START + PGTABLE_RANGE)
+#define IOREMAP_END	(KERN_VIRT_START + KERN_VIRT_SIZE)
+
 
 /*
  * Region IDs
@@ -72,19 +87,28 @@
 #define USER_REGION_ID		(0UL)
 
 /*
- * Defines the address of the vmemap area, in its own region
+ * Defines the address of the vmemap area, in its own region on
+ * hash table CPUs and after the vmalloc space on Book3E
  */
+#ifdef CONFIG_PPC_BOOK3E
+#define VMEMMAP_BASE		VMALLOC_END
+#define VMEMMAP_END		KERN_IO_START
+#else
 #define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+#endif
 #define vmemmap			((struct page *)VMEMMAP_BASE)
 
 
 /*
  * Include the PTE bits definitions
  */
+#ifdef CONFIG_PPC_BOOK3S
 #include <asm/pte-hash64.h>
+#else
+#include <asm/pte-book3e.h>
+#endif
 #include <asm/pte-common.h>
 
-
 #ifdef CONFIG_PPC_MM_SLICES
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
@@ -92,6 +116,9 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/stddef.h>
+#include <asm/tlbflush.h>
+
 /*
  * This is the default implementation of various PTE accessors, it's
  * used in all cases except Book3S with 64K pages where we have a
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
new file mode 100644
index 00000000000..1d27c77d770
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_POWERPC_PTE_BOOK3E_H
+#define _ASM_POWERPC_PTE_BOOK3E_H
+#ifdef __KERNEL__
+
+/* PTE bit definitions for processors compliant to the Book3E
+ * architecture 2.06 or later. The position of the PTE bits
+ * matches the HW definition of the optional Embedded Page Table
+ * category.
+ */
+
+/* Architected bits */
+#define _PAGE_PRESENT	0x000001 /* software: pte contains a translation */
+#define _PAGE_FILE	0x000002 /* (!present only) software: pte holds file offset */
+#define _PAGE_SW1	0x000002
+#define _PAGE_BAP_SR	0x000004
+#define _PAGE_BAP_UR	0x000008
+#define _PAGE_BAP_SW	0x000010
+#define _PAGE_BAP_UW	0x000020
+#define _PAGE_BAP_SX	0x000040
+#define _PAGE_BAP_UX	0x000080
+#define _PAGE_PSIZE_MSK	0x000f00
+#define _PAGE_PSIZE_4K	0x000200
+#define _PAGE_PSIZE_64K	0x000600
+#define _PAGE_PSIZE_1M	0x000a00
+#define _PAGE_PSIZE_16M	0x000e00
+#define _PAGE_DIRTY	0x001000 /* C: page changed */
+#define _PAGE_SW0	0x002000
+#define _PAGE_U3	0x004000
+#define _PAGE_U2	0x008000
+#define _PAGE_U1	0x010000
+#define _PAGE_U0	0x020000
+#define _PAGE_ACCESSED	0x040000
+#define _PAGE_LENDIAN	0x080000
+#define _PAGE_GUARDED	0x100000
+#define _PAGE_COHERENT	0x200000 /* M: enforce memory coherence */
+#define _PAGE_NO_CACHE	0x400000 /* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x800000 /* W: cache write-through */
+
+/* "Higher level" linux bit combinations */
+#define _PAGE_EXEC	_PAGE_BAP_SX /* Can be executed from potentially */
+#define _PAGE_HWEXEC	_PAGE_BAP_UX /* .. and was cache cleaned */
+#define _PAGE_RW	(_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */
+#define _PAGE_KERNEL_RW	(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY)
+#define _PAGE_KERNEL_RO	(_PAGE_BAP_SR)
+#define _PAGE_USER	(_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */
+
+#define _PAGE_HASHPTE	0
+#define _PAGE_BUSY	0
+
+#define _PAGE_SPECIAL	_PAGE_SW0
+
+/* Flags to be preserved on PTE modifications */
+#define _PAGE_HPTEFLAGS	_PAGE_BUSY
+
+/* Base page size */
+#ifdef CONFIG_PPC_64K_PAGES
+#define _PAGE_PSIZE	_PAGE_PSIZE_64K
+#define PTE_RPN_SHIFT	(28)
+#else
+#define _PAGE_PSIZE	_PAGE_PSIZE_4K
+#define	PTE_RPN_SHIFT	(24)
+#endif
+
+/* On 32-bit, we never clear the top part of the PTE */
+#ifdef CONFIG_PPC32
+#define _PTE_NONE_MASK	0xffffffff00000000ULL
+#endif
+
+#endif /* __KERNEL__ */
+#endif /*  _ASM_POWERPC_PTE_FSL_BOOKE_H */
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index a7e210b6b48..8bb6464ba61 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -34,6 +34,9 @@
 #ifndef _PAGE_4K_PFN
 #define _PAGE_4K_PFN		0
 #endif
+#ifndef _PAGE_SAO
+#define _PAGE_SAO	0
+#endif
 #ifndef _PAGE_PSIZE
 #define _PAGE_PSIZE		0
 #endif
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 561b6465231..0a9f30b5495 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -52,9 +52,11 @@
 #include <linux/kvm_host.h>
 #endif
 
+#ifdef CONFIG_PPC32
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 #include "head_booke.h"
 #endif
+#endif
 
 #if defined(CONFIG_FSL_BOOKE)
 #include "../mm/mmu_decl.h"
@@ -260,6 +262,7 @@ int main(void)
 	DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
 #endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_PPC32)
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 	DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
 	DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
@@ -278,7 +281,7 @@ int main(void)
 	DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
 	DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
 #endif
-
+#endif
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index c46ef2ffa3d..90df6ffe3a4 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -57,8 +57,10 @@ unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
 #define HUGEPTE_CACHE_NAME(psize)	(huge_pgtable_cache_name[psize])
 
 static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
-	"unused_4K", "hugepte_cache_64K", "unused_64K_AP",
-	"hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+	[MMU_PAGE_64K]	= "hugepte_cache_64K",
+	[MMU_PAGE_1M]	= "hugepte_cache_1M",
+	[MMU_PAGE_16M]	= "hugepte_cache_16M",
+	[MMU_PAGE_16G]	= "hugepte_cache_16G",
 };
 
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
@@ -700,6 +702,8 @@ static void __init set_huge_psize(int psize)
 		if (mmu_huge_psizes[psize] ||
 		   mmu_psize_defs[psize].shift == PAGE_SHIFT)
 			return;
+		if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL))
+			return;
 		hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
 
 		switch (mmu_psize_defs[psize].shift) {
-- 
cgit v1.2.3


From 13363ab9b9d040ebeace3a1a3a5ddcb13bf0d644 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:39 +0000
Subject: powerpc: Add definitions used by exception handling on 64-bit Book3E

This adds various definitions and macros used by the exception and TLB
miss handling on 64-bit BookE

It also adds the definitions of the SPRGs used for various exception types

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64e.h | 201 +++++++++++++++++++++++++++++++
 arch/powerpc/include/asm/reg.h           |  19 +++
 2 files changed, 220 insertions(+)
 create mode 100644 arch/powerpc/include/asm/exception-64e.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
new file mode 100644
index 00000000000..94cb3d79d12
--- /dev/null
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -0,0 +1,201 @@
+/*
+ *  Definitions for use by exception code on Book3-E
+ *
+ *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_EXCEPTION_64E_H
+#define _ASM_POWERPC_EXCEPTION_64E_H
+
+/*
+ * SPRGs usage an other considerations...
+ *
+ * Since TLB miss and other standard exceptions can be interrupted by
+ * critical exceptions which can themselves be interrupted by machine
+ * checks, and since the two later can themselves cause a TLB miss when
+ * hitting the linear mapping for the kernel stacks, we need to be a bit
+ * creative on how we use SPRGs.
+ *
+ * The base idea is that we have one SRPG reserved for critical and one
+ * for machine check interrupts. Those are used to save a GPR that can
+ * then be used to get the PACA, and store as much context as we need
+ * to save in there. That includes saving the SPRGs used by the TLB miss
+ * handler for linear mapping misses and the associated SRR0/1 due to
+ * the above re-entrancy issue.
+ *
+ * So here's the current usage pattern. It's done regardless of which
+ * SPRGs are user-readable though, thus we might have to change some of
+ * this later. In order to do that more easily, we use special constants
+ * for naming them
+ *
+ * WARNING: Some of these SPRGs are user readable. We need to do something
+ * about it as some point by making sure they can't be used to leak kernel
+ * critical data
+ */
+
+
+/* We are out of SPRGs so we save some things in the PACA. The normal
+ * exception frame is smaller than the CRIT or MC one though
+ */
+#define EX_R1		(0 * 8)
+#define EX_CR		(1 * 8)
+#define EX_R10		(2 * 8)
+#define EX_R11		(3 * 8)
+#define EX_R14		(4 * 8)
+#define EX_R15		(5 * 8)
+
+/* The TLB miss exception uses different slots */
+
+#define EX_TLB_R10	( 0 * 8)
+#define EX_TLB_R11	( 1 * 8)
+#define EX_TLB_R12	( 2 * 8)
+#define EX_TLB_R13	( 3 * 8)
+#define EX_TLB_R14	( 4 * 8)
+#define EX_TLB_R15	( 5 * 8)
+#define EX_TLB_R16	( 6 * 8)
+#define EX_TLB_CR	( 7 * 8)
+#define EX_TLB_DEAR	( 8 * 8) /* Level 0 and 2 only */
+#define EX_TLB_ESR	( 9 * 8) /* Level 0 and 2 only */
+#define EX_TLB_SRR0	(10 * 8)
+#define EX_TLB_SRR1	(11 * 8)
+#define EX_TLB_MMUCR0	(12 * 8) /* Level 0 */
+#define EX_TLB_MAS1	(12 * 8) /* Level 0 */
+#define EX_TLB_MAS2	(13 * 8) /* Level 0 */
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+#define EX_TLB_R8	(14 * 8)
+#define EX_TLB_R9	(15 * 8)
+#define EX_TLB_LR	(16 * 8)
+#define EX_TLB_SIZE	(17 * 8)
+#else
+#define EX_TLB_SIZE	(14 * 8)
+#endif
+
+#define	START_EXCEPTION(label)						\
+	.globl exc_##label##_book3e;					\
+exc_##label##_book3e:
+
+/* TLB miss exception prolog
+ *
+ * This prolog handles re-entrancy (up to 3 levels supported in the PACA
+ * though we currently don't test for overflow). It provides you with a
+ * re-entrancy safe working space of r10...r16 and CR with r12 being used
+ * as the exception area pointer in the PACA for that level of re-entrancy
+ * and r13 containing the PACA pointer.
+ *
+ * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply
+ * as-is for instruction exceptions. It's up to the actual exception code
+ * to save them as well if required.
+ */
+#define TLB_MISS_PROLOG							    \
+	mtspr	SPRN_SPRG_TLB_SCRATCH,r12;				    \
+	mfspr	r12,SPRN_SPRG_TLB_EXFRAME;				    \
+	std	r10,EX_TLB_R10(r12);					    \
+	mfcr	r10;							    \
+	std	r11,EX_TLB_R11(r12);					    \
+	mfspr	r11,SPRN_SPRG_TLB_SCRATCH;				    \
+	std	r13,EX_TLB_R13(r12);					    \
+	mfspr	r13,SPRN_SPRG_PACA;					    \
+	std	r14,EX_TLB_R14(r12);					    \
+	addi	r14,r12,EX_TLB_SIZE;					    \
+	std	r15,EX_TLB_R15(r12);					    \
+	mfspr	r15,SPRN_SRR1;						    \
+	std	r16,EX_TLB_R16(r12);					    \
+	mfspr	r16,SPRN_SRR0;						    \
+	std	r10,EX_TLB_CR(r12);					    \
+	std	r11,EX_TLB_R12(r12);					    \
+	mtspr	SPRN_SPRG_TLB_EXFRAME,r14;				    \
+	std	r15,EX_TLB_SRR1(r12);					    \
+	std	r16,EX_TLB_SRR0(r12);					    \
+	TLB_MISS_PROLOG_STATS
+
+/* And these are the matching epilogs that restores things
+ *
+ * There are 3 epilogs:
+ *
+ * - SUCCESS       : Unwinds one level
+ * - ERROR         : restore from level 0 and reset
+ * - ERROR_SPECIAL : restore from current level and reset
+ *
+ * Normal errors use ERROR, that is, they restore the initial fault context
+ * and trigger a fault. However, there is a special case for linear mapping
+ * errors. Those should basically never happen, but if they do happen, we
+ * want the error to point out the context that did that linear mapping
+ * fault, not the initial level 0 (basically, we got a bogus PGF or something
+ * like that). For userland errors on the linear mapping, there is no
+ * difference since those are always level 0 anyway
+ */
+
+#define TLB_MISS_RESTORE(freg)						    \
+	ld	r14,EX_TLB_CR(r12);					    \
+	ld	r10,EX_TLB_R10(r12);					    \
+	ld	r15,EX_TLB_SRR0(r12);					    \
+	ld	r16,EX_TLB_SRR1(r12);					    \
+	mtspr	SPRN_SPRG_TLB_EXFRAME,freg;				    \
+	ld	r11,EX_TLB_R11(r12);					    \
+	mtcr	r14;							    \
+	ld	r13,EX_TLB_R13(r12);					    \
+	ld	r14,EX_TLB_R14(r12);					    \
+	mtspr	SPRN_SRR0,r15;						    \
+	ld	r15,EX_TLB_R15(r12);					    \
+	mtspr	SPRN_SRR1,r16;						    \
+	TLB_MISS_RESTORE_STATS						    \
+	ld	r16,EX_TLB_R16(r12);					    \
+	ld	r12,EX_TLB_R12(r12);					    \
+
+#define TLB_MISS_EPILOG_SUCCESS						    \
+	TLB_MISS_RESTORE(r12)
+
+#define TLB_MISS_EPILOG_ERROR						    \
+	addi	r12,r13,PACA_EXTLB;					    \
+	TLB_MISS_RESTORE(r12)
+
+#define TLB_MISS_EPILOG_ERROR_SPECIAL					    \
+	addi	r11,r13,PACA_EXTLB;					    \
+	TLB_MISS_RESTORE(r11)
+
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+#define TLB_MISS_PROLOG_STATS						    \
+	mflr	r10;							    \
+	std	r8,EX_TLB_R8(r12);					    \
+	std	r9,EX_TLB_R9(r12);					    \
+	std	r10,EX_TLB_LR(r12);
+#define TLB_MISS_RESTORE_STATS					            \
+	ld	r16,EX_TLB_LR(r12);					    \
+	ld	r9,EX_TLB_R9(r12);					    \
+	ld	r8,EX_TLB_R8(r12);					    \
+	mtlr	r16;
+#define TLB_MISS_STATS_D(name)						    \
+	addi	r9,r13,MMSTAT_DSTATS+name;				    \
+	bl	.tlb_stat_inc;
+#define TLB_MISS_STATS_I(name)						    \
+	addi	r9,r13,MMSTAT_ISTATS+name;				    \
+	bl	.tlb_stat_inc;
+#define TLB_MISS_STATS_X(name)						    \
+	ld	r8,PACA_EXTLB+EX_TLB_ESR(r13);				    \
+	cmpdi	cr2,r8,-1;						    \
+	beq	cr2,61f;						    \
+	addi	r9,r13,MMSTAT_DSTATS+name;				    \
+	b	62f;							    \
+61:	addi	r9,r13,MMSTAT_ISTATS+name;				    \
+62:	bl	.tlb_stat_inc;
+#define TLB_MISS_STATS_SAVE_INFO					    \
+	std	r14,EX_TLB_ESR(r12);	/* save ESR */			    \
+
+
+#else
+#define TLB_MISS_PROLOG_STATS
+#define TLB_MISS_RESTORE_STATS
+#define TLB_MISS_STATS_D(name)
+#define TLB_MISS_STATS_I(name)
+#define TLB_MISS_STATS_X(name)
+#define TLB_MISS_STATS_Y(name)
+#define TLB_MISS_STATS_SAVE_INFO
+#endif
+
+
+#endif /* _ASM_POWERPC_EXCEPTION_64E_H */
+
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index c8715331e1b..6315edc205d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -652,6 +652,16 @@
  *	- SPRG2 scratch for exception vectors
  *	- SPRG3 unused (user visible)
  *
+ * 64-bit embedded
+ *	- SPRG0 generic exception scratch
+ *	- SPRG2 TLB exception stack
+ *	- SPRG3 unused (user visible)
+ *	- SPRG4 unused (user visible)
+ *	- SPRG6 TLB miss scratch (user visible, sorry !)
+ *	- SPRG7 critical exception scratch
+ *	- SPRG8 machine check exception scratch
+ *	- SPRG9 debug exception scratch
+ *
  * All 32-bit:
  *	- SPRG3 current thread_info pointer
  *        (virtual on BookE, physical on others)
@@ -705,6 +715,15 @@
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG2
 #endif
 
+#ifdef CONFIG_PPC_BOOK3E_64
+#define SPRN_SPRG_MC_SCRATCH	SPRN_SPRG8
+#define SPRN_SPRG_CRIT_SCRATCH	SPRN_SPRG7
+#define SPRN_SPRG_DBG_SCRATCH	SPRN_SPRG9
+#define SPRN_SPRG_TLB_EXFRAME	SPRN_SPRG2
+#define SPRN_SPRG_TLB_SCRATCH	SPRN_SPRG6
+#define SPRN_SPRG_GEN_SCRATCH	SPRN_SPRG0
+#endif
+
 #ifdef CONFIG_PPC_BOOK3S_32
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
 #define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
-- 
cgit v1.2.3


From dce6670aaa7efece0558010b48d5ef9d421154be Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:42 +0000
Subject: powerpc: Add PACA fields specific to 64-bit Book3E processors

This adds various fields in the PACA that are for use specifically
by Book3E processors, such as exception save areas, current pgd
pointer, special exceptions kernel stacks etc...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/paca.h   | 23 ++++++++++++++++++++---
 arch/powerpc/kernel/asm-offsets.c | 14 ++++++++++++++
 arch/powerpc/kernel/paca.c        |  3 +++
 3 files changed, 37 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index c8a3cbfe02f..b634456ea89 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -14,9 +14,11 @@
 #define _ASM_POWERPC_PACA_H
 #ifdef __KERNEL__
 
-#include	<asm/types.h>
-#include	<asm/lppaca.h>
-#include	<asm/mmu.h>
+#include <asm/types.h>
+#include <asm/lppaca.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/exception-64e.h>
 
 register struct paca_struct *local_paca asm("r13");
 
@@ -91,6 +93,21 @@ struct paca_struct {
 	u16 slb_cache[SLB_CACHE_ENTRIES];
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
+#ifdef CONFIG_PPC_BOOK3E
+	pgd_t *pgd;			/* Current PGD */
+	pgd_t *kernel_pgd;		/* Kernel PGD */
+	u64 exgen[8] __attribute__((aligned(0x80)));
+	u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80)));
+	u64 exmc[8];		/* used for machine checks */
+	u64 excrit[8];		/* used for crit interrupts */
+	u64 exdbg[8];		/* used for debug interrupts */
+
+	/* Kernel stack pointers for use by special exceptions */
+	void *mc_kstack;
+	void *crit_kstack;
+	void *dbg_kstack;
+#endif /* CONFIG_PPC_BOOK3E */
+
 	mm_context_t context;
 
 	/*
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 0a9f30b5495..b9e010d0fc9 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -140,6 +140,20 @@ int main(void)
 					    context.high_slices_psize));
 	DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
 #endif /* CONFIG_PPC_MM_SLICES */
+
+#ifdef CONFIG_PPC_BOOK3E
+	DEFINE(PACAPGD, offsetof(struct paca_struct, pgd));
+	DEFINE(PACA_KERNELPGD, offsetof(struct paca_struct, kernel_pgd));
+	DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
+	DEFINE(PACA_EXTLB, offsetof(struct paca_struct, extlb));
+	DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
+	DEFINE(PACA_EXCRIT, offsetof(struct paca_struct, excrit));
+	DEFINE(PACA_EXDBG, offsetof(struct paca_struct, exdbg));
+	DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack));
+	DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack));
+	DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack));
+#endif /* CONFIG_PPC_BOOK3E */
+
 #ifdef CONFIG_PPC_STD_MMU_64
 	DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
 	DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index e9962c7f8a0..d16b1ea55d4 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -13,6 +13,7 @@
 #include <asm/lppaca.h>
 #include <asm/paca.h>
 #include <asm/sections.h>
+#include <asm/pgtable.h>
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
@@ -87,6 +88,8 @@ void __init initialise_pacas(void)
 
 #ifdef CONFIG_PPC_BOOK3S
 		new_paca->lppaca_ptr = &lppaca[cpu];
+#else
+		new_paca->kernel_pgd = swapper_pg_dir;
 #endif
 		new_paca->lock_token = 0x8000;
 		new_paca->paca_index = cpu;
-- 
cgit v1.2.3


From a8f7758c1c52a13e031266483efd5525157e43e9 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:45 +0000
Subject: powerpc/mm: Move around mmu_gathers definition on 64-bit

The definition for the global structure mmu_gathers, used by generic code,
is currently defined in multiple places not including anything used by
64-bit Book3E. This changes it by moving to one place common to all
processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/init_32.c    | 2 --
 arch/powerpc/mm/pgtable.c    | 2 ++
 arch/powerpc/mm/tlb_hash64.c | 5 -----
 3 files changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 3de6a0d9382..3ef5084b90c 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -54,8 +54,6 @@
 #endif
 #define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
 phys_addr_t total_memory;
 phys_addr_t total_lowmem;
 
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index a65979a5f75..cafb2a26954 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,8 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
 #ifdef CONFIG_SMP
 
 /*
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 8e35a606693..2b2f35f6985 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -33,11 +33,6 @@
 
 DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
-/* This is declared as we are using the more or less generic
- * arch/powerpc/include/asm/tlb.h file -- tgall
- */
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
 /*
  * A linux PTE was changed and the corresponding hash table entry
  * neesd to be flushed. This function will either perform the flush
-- 
cgit v1.2.3


From 25d21ad6e799cccd097b9df2a2fefe19a7e1dfcf Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:47 +0000
Subject: powerpc: Add TLB management code for 64-bit Book3E

This adds the TLB miss handler assembly, the low level TLB flush routines
along with the necessary hook for dealing with our virtual page tables
or indirect TLB entries that need to be flushes when PTE pages are freed.

There is currently no support for hugetlbfs

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-40x.h     |   3 +
 arch/powerpc/include/asm/mmu-44x.h     |   6 +
 arch/powerpc/include/asm/mmu-8xx.h     |   3 +
 arch/powerpc/include/asm/mmu-hash32.h  |   6 +
 arch/powerpc/include/asm/mmu_context.h |   8 +
 arch/powerpc/kernel/setup_64.c         |   4 +
 arch/powerpc/mm/mmu_decl.h             |  14 +-
 arch/powerpc/mm/tlb_low_64e.S          | 734 +++++++++++++++++++++++++++++++++
 arch/powerpc/mm/tlb_nohash.c           | 203 ++++++++-
 arch/powerpc/mm/tlb_nohash_low.S       |  79 ++++
 10 files changed, 1055 insertions(+), 5 deletions(-)
 create mode 100644 arch/powerpc/mm/tlb_low_64e.S

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
index 776f415a36a..34916865eae 100644
--- a/arch/powerpc/include/asm/mmu-40x.h
+++ b/arch/powerpc/include/asm/mmu-40x.h
@@ -61,4 +61,7 @@ typedef struct {
 
 #endif /* !__ASSEMBLY__ */
 
+#define mmu_virtual_psize	MMU_PAGE_4K
+#define mmu_linear_psize	MMU_PAGE_256M
+
 #endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index 3c86576bfef..0372669383a 100644
--- a/arch/powerpc/include/asm/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -79,16 +79,22 @@ typedef struct {
 
 #if (PAGE_SHIFT == 12)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_4K
+#define mmu_virtual_psize	MMU_PAGE_4K
 #elif (PAGE_SHIFT == 14)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_16K
+#define mmu_virtual_psize	MMU_PAGE_16K
 #elif (PAGE_SHIFT == 16)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_64K
+#define mmu_virtual_psize	MMU_PAGE_64K
 #elif (PAGE_SHIFT == 18)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_256K
+#define mmu_virtual_psize	MMU_PAGE_256K
 #else
 #error "Unsupported PAGE_SIZE"
 #endif
 
+#define mmu_linear_psize	MMU_PAGE_256M
+
 #define PPC44x_PGD_OFF_SHIFT	(32 - PGDIR_SHIFT + PGD_T_LOG2)
 #define PPC44x_PGD_OFF_MASK_BIT	(PGDIR_SHIFT - PGD_T_LOG2)
 #define PPC44x_PTE_ADD_SHIFT	(32 - PGDIR_SHIFT + PTE_SHIFT + PTE_T_LOG2)
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index 07865a35784..3d11d3ce79e 100644
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -143,4 +143,7 @@ typedef struct {
 } mm_context_t;
 #endif /* !__ASSEMBLY__ */
 
+#define mmu_virtual_psize	MMU_PAGE_4K
+#define mmu_linear_psize	MMU_PAGE_8M
+
 #endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
index 16b1a1e77e6..382fc689f20 100644
--- a/arch/powerpc/include/asm/mmu-hash32.h
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -80,4 +80,10 @@ typedef struct {
 
 #endif /* !__ASSEMBLY__ */
 
+/* We happily ignore the smaller BATs on 601, we don't actually use
+ * those definitions on hash32 at the moment anyway
+ */
+#define mmu_virtual_psize	MMU_PAGE_4K
+#define mmu_linear_psize	MMU_PAGE_256M
+
 #endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 8dffed31701..b34e94d9443 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -43,6 +43,10 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	tsk->thread.pgdir = next->pgd;
 #endif /* CONFIG_PPC32 */
 
+	/* 64-bit Book3E keeps track of current PGD in the PACA */
+#ifdef CONFIG_PPC_BOOK3E_64
+	get_paca()->pgd = next->pgd;
+#endif
 	/* Nothing else to do if we aren't actually switching */
 	if (prev == next)
 		return;
@@ -89,6 +93,10 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
 static inline void enter_lazy_tlb(struct mm_struct *mm,
 				  struct task_struct *tsk)
 {
+	/* 64-bit Book3E keeps track of current PGD in the PACA */
+#ifdef CONFIG_PPC_BOOK3E_64
+	get_paca()->pgd = NULL;
+#endif
 }
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index a6b6c4c9ae4..65aced7b833 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -62,6 +62,7 @@
 #include <asm/udbg.h>
 #include <asm/kexec.h>
 #include <asm/swiotlb.h>
+#include <asm/mmu_context.h>
 
 #include "setup.h"
 
@@ -147,6 +148,9 @@ void __init setup_paca(int cpu)
 {
 	local_paca = &paca[cpu];
 	mtspr(SPRN_SPRG_PACA, local_paca);
+#ifdef CONFIG_PPC_BOOK3E
+	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#endif
 }
 
 /*
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 3871dceee2d..5961c6b739d 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -41,7 +41,11 @@ static inline void _tlbil_pid(unsigned int pid)
 #else /* CONFIG_40x || CONFIG_8xx */
 extern void _tlbil_all(void);
 extern void _tlbil_pid(unsigned int pid);
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbil_pid_noind(unsigned int pid);
+#else
 #define _tlbil_pid_noind(pid)	_tlbil_pid(pid)
+#endif
 #endif /* !(CONFIG_40x || CONFIG_8xx) */
 
 /*
@@ -53,7 +57,10 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
 {
 	asm volatile ("tlbie %0; sync" : : "r" (address) : "memory");
 }
-#else /* CONFIG_8xx */
+#elif defined(CONFIG_PPC_BOOK3E)
+extern void _tlbil_va(unsigned long address, unsigned int pid,
+		      unsigned int tsize, unsigned int ind);
+#else
 extern void __tlbil_va(unsigned long address, unsigned int pid);
 static inline void _tlbil_va(unsigned long address, unsigned int pid,
 			     unsigned int tsize, unsigned int ind)
@@ -67,11 +74,16 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
  * implementation. When that becomes the case, this will be
  * an extern.
  */
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
+			   unsigned int tsize, unsigned int ind);
+#else
 static inline void _tlbivax_bcast(unsigned long address, unsigned int pid,
 				   unsigned int tsize, unsigned int ind)
 {
 	BUG();
 }
+#endif
 
 #else /* CONFIG_PPC_MMU_NOHASH */
 
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
new file mode 100644
index 00000000000..10d524ded7b
--- /dev/null
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -0,0 +1,734 @@
+/*
+ *  Low leve TLB miss handlers for Book3E
+ *
+ *  Copyright (C) 2008-2009
+ *      Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/processor.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/pgtable.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/ppc-opcode.h>
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define VPTE_PMD_SHIFT	(PTE_INDEX_SIZE+1)
+#else
+#define VPTE_PMD_SHIFT	(PTE_INDEX_SIZE)
+#endif
+#define VPTE_PUD_SHIFT	(VPTE_PMD_SHIFT + PMD_INDEX_SIZE)
+#define VPTE_PGD_SHIFT	(VPTE_PUD_SHIFT + PUD_INDEX_SIZE)
+#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE)
+
+
+/**********************************************************************
+ *                                                                    *
+ * TLB miss handling for Book3E with TLB reservation and HES support  *
+ *                                                                    *
+ **********************************************************************/
+
+
+/* Data TLB miss */
+	START_EXCEPTION(data_tlb_miss)
+	TLB_MISS_PROLOG
+
+	/* Now we handle the fault proper. We only save DEAR in normal
+	 * fault case since that's the only interesting values here.
+	 * We could probably also optimize by not saving SRR0/1 in the
+	 * linear mapping case but I'll leave that for later
+	 */
+	mfspr	r14,SPRN_ESR
+	mfspr	r16,SPRN_DEAR		/* get faulting address */
+	srdi	r15,r16,60		/* get region */
+	cmpldi	cr0,r15,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* The page tables are mapped virtually linear. At this point, though,
+	 * we don't know whether we are trying to fault in a first level
+	 * virtual address or a virtual page table address. We can get that
+	 * from bit 0x1 of the region ID which we have set for a page table
+	 */
+	andi.	r10,r15,0x1
+	bne-	virt_page_table_tlb_miss
+
+	std	r14,EX_TLB_ESR(r12);	/* save ESR */
+	std	r16,EX_TLB_DEAR(r12);	/* save DEAR */
+
+	 /* We need _PAGE_PRESENT and  _PAGE_ACCESSED set */
+	li	r11,_PAGE_PRESENT
+	oris	r11,r11,_PAGE_ACCESSED@h
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	cmpldi	cr0,r15,0		/* Check for user region */
+
+	/* We pre-test some combination of permissions to avoid double
+	 * faults:
+	 *
+	 * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
+	 * ESR_ST   is 0x00800000
+	 * _PAGE_BAP_SW is 0x00000010
+	 * So the shift is >> 19. This tests for supervisor writeability.
+	 * If the page happens to be supervisor writeable and not user
+	 * writeable, we will take a new fault later, but that should be
+	 * a rare enough case.
+	 *
+	 * We also move ESR_ST in _PAGE_DIRTY position
+	 * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
+	 *
+	 * MAS1 is preset for all we need except for TID that needs to
+	 * be cleared for kernel translations
+	 */
+	rlwimi	r11,r14,32-19,27,27
+	rlwimi	r11,r14,32-16,19,19
+	beq	normal_tlb_miss
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r15,8		/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1		/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	beq+	normal_tlb_miss
+
+	/* We got a crappy address, just fault with whatever DEAR and ESR
+	 * are here
+	 */
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+
+/* Instruction TLB miss */
+	START_EXCEPTION(instruction_tlb_miss)
+	TLB_MISS_PROLOG
+
+	/* If we take a recursive fault, the second level handler may need
+	 * to know whether we are handling a data or instruction fault in
+	 * order to get to the right store fault handler. We provide that
+	 * info by writing a crazy value in ESR in our exception frame
+	 */
+	li	r14,-1	/* store to exception frame is done later */
+
+	/* Now we handle the fault proper. We only save DEAR in the non
+	 * linear mapping case since we know the linear mapping case will
+	 * not re-enter. We could indeed optimize and also not save SRR0/1
+	 * in the linear mapping case but I'll leave that for later
+	 *
+	 * Faulting address is SRR0 which is already in r16
+	 */
+	srdi	r15,r16,60		/* get region */
+	cmpldi	cr0,r15,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	li	r11,_PAGE_PRESENT|_PAGE_HWEXEC	/* Base perm */
+	oris	r11,r11,_PAGE_ACCESSED@h
+
+	cmpldi	cr0,r15,0			/* Check for user region */
+	std	r14,EX_TLB_ESR(r12)		/* write crazy -1 to frame */
+	beq	normal_tlb_miss
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r15,8			/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1			/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	beq+	normal_tlb_miss
+
+	/* We got a crappy address, just fault */
+	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+/*
+ * This is the guts of the first-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = faulting address
+ * r15 = region ID
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = PTE permission mask
+ * r10 = crap (free to use)
+ */
+normal_tlb_miss:
+	/* So we first construct the page table address. We do that by
+	 * shifting the bottom of the address (not the region ID) by
+	 * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and
+	 * or'ing the fourth high bit.
+	 *
+	 * NOTE: For 64K pages, we do things slightly differently in
+	 * order to handle the weird page table format used by linux
+	 */
+	ori	r10,r15,0x1
+#ifdef CONFIG_PPC_64K_PAGES
+	/* For the top bits, 16 bytes per PTE */
+	rldicl	r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4
+	/* Now create the bottom bits as 0 in position 0x8000 and
+	 * the rest calculated for 8 bytes per PTE
+	 */
+	rldicl	r15,r16,64-(PAGE_SHIFT-3),64-15
+	/* Insert the bottom bits in */
+	rlwimi	r14,r15,0,16,31
+#else
+	rldicl	r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4
+#endif
+	sldi	r15,r10,60
+	clrrdi	r14,r14,3
+	or	r10,r15,r14
+
+	/* Set the TLB reservation and seach for existing entry. Then load
+	 * the entry.
+	 */
+	PPC_TLBSRX_DOT(0,r16)
+	ld	r14,0(r10)
+	beq	normal_tlb_miss_done
+
+finish_normal_tlb_miss:
+	/* Check if required permissions are met */
+	andc.	r15,r11,r14
+	bne-	normal_tlb_miss_access_fault
+
+	/* Now we build the MAS:
+	 *
+	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
+	 * MAS 1   :	Almost fully setup
+	 *               - PID already updated by caller if necessary
+	 *               - TSIZE need change if !base page size, not
+	 *                 yet implemented for now
+	 * MAS 2   :	Defaults not useful, need to be redone
+	 * MAS 3+7 :	Needs to be done
+	 *
+	 * TODO: mix up code below for better scheduling
+	 */
+	clrrdi	r11,r16,12		/* Clear low crap in EA */
+	rlwimi	r11,r14,32-19,27,31	/* Insert WIMGE */
+	mtspr	SPRN_MAS2,r11
+
+	/* Check page size, if not standard, update MAS1 */
+	rldicl	r11,r14,64-8,64-8
+#ifdef CONFIG_PPC_64K_PAGES
+	cmpldi	cr0,r11,BOOK3E_PAGESZ_64K
+#else
+	cmpldi	cr0,r11,BOOK3E_PAGESZ_4K
+#endif
+	beq-	1f
+	mfspr	r11,SPRN_MAS1
+	rlwimi	r11,r14,31,21,24
+	rlwinm	r11,r11,0,21,19
+	mtspr	SPRN_MAS1,r11
+1:
+	/* Move RPN in position */
+	rldicr	r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+	clrldi	r15,r11,12		/* Clear crap at the top */
+	rlwimi	r15,r14,32-8,22,25	/* Move in U bits */
+	rlwimi	r15,r14,32-2,26,31	/* Move in BAP bits */
+
+	/* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+	andi.	r11,r14,_PAGE_DIRTY
+	bne	1f
+	li	r11,MAS3_SW|MAS3_UW
+	andc	r15,r15,r11
+1:	mtspr	SPRN_MAS7_MAS3,r15
+
+	tlbwe
+
+normal_tlb_miss_done:
+	/* We don't bother with restoring DEAR or ESR since we know we are
+	 * level 0 and just going back to userland. They are only needed
+	 * if you are going to take an access fault
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
+	TLB_MISS_EPILOG_SUCCESS
+	rfi
+
+normal_tlb_miss_access_fault:
+	/* We need to check if it was an instruction miss */
+	andi.	r10,r11,_PAGE_HWEXEC
+	bne	1f
+	ld	r14,EX_TLB_DEAR(r12)
+	ld	r15,EX_TLB_ESR(r12)
+	mtspr	SPRN_DEAR,r14
+	mtspr	SPRN_ESR,r15
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = region (top 4 bits of address)
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * Note that this should only ever be called as a second level handler
+ * with the current scheme when using SW load.
+ * That means we can always get the original fault DEAR at
+ * EX_TLB_DEAR-EX_TLB_SIZE(r12)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will restart the whole fault at level
+ * 0 so we don't care too much about clobbers
+ *
+ * XXX That code was written back when we couldn't clobber r14. We can now,
+ * so we could probably optimize things a bit
+ */
+virt_page_table_tlb_miss:
+	/* Are we hitting a kernel page table ? */
+	andi.	r10,r15,0x8
+
+	/* The cool thing now is that r10 contains 0 for user and 8 for kernel,
+	 * and we happen to have the swapper_pg_dir at offset 8 from the user
+	 * pgdir in the PACA :-).
+	 */
+	add	r11,r10,r13
+
+	/* If kernel, we need to clear MAS1 TID */
+	beq	1f
+	/* XXX replace the RMW cycles with immediate loads + writes */
+	mfspr	r10,SPRN_MAS1
+	rlwinm	r10,r10,0,16,1			/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+1:
+	/* Search if we already have a TLB entry for that virtual address, and
+	 * if we do, bail out.
+	 */
+	PPC_TLBSRX_DOT(0,r16)
+	beq	virt_page_table_tlb_miss_done
+
+	/* Now, we need to walk the page tables. First check if we are in
+	 * range.
+	 */
+	rldicl.	r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4
+	bne-	virt_page_table_tlb_miss_fault
+
+	/* Get the PGD pointer */
+	ld	r15,PACAPGD(r11)
+	cmpldi	cr0,r15,0
+	beq-	virt_page_table_tlb_miss_fault
+
+	/* Get to PGD entry */
+	rldicl	r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	virt_page_table_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+	/* Get to PUD entry */
+	rldicl	r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	virt_page_table_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+	/* Get to PMD entry */
+	rldicl	r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	virt_page_table_tlb_miss_fault
+
+	/* Ok, we're all right, we can now create a kernel translation for
+	 * a 4K or 64K page from r16 -> r15.
+	 */
+	/* Now we build the MAS:
+	 *
+	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
+	 * MAS 1   :	Almost fully setup
+	 *               - PID already updated by caller if necessary
+	 *               - TSIZE for now is base page size always
+	 * MAS 2   :	Use defaults
+	 * MAS 3+7 :	Needs to be done
+	 *
+	 * So we only do MAS 2 and 3 for now...
+	 */
+	clrldi	r11,r15,4		/* remove region ID from RPN */
+	ori	r10,r11,1		/* Or-in SR */
+	mtspr	SPRN_MAS7_MAS3,r10
+
+	tlbwe
+
+virt_page_table_tlb_miss_done:
+
+	/* We have overriden MAS2:EPN but currently our primary TLB miss
+	 * handler will always restore it so that should not be an issue,
+	 * if we ever optimize the primary handler to not write MAS2 on
+	 * some cases, we'll have to restore MAS2:EPN here based on the
+	 * original fault's DEAR. If we do that we have to modify the
+	 * ITLB miss handler to also store SRR0 in the exception frame
+	 * as DEAR.
+	 *
+	 * However, one nasty thing we did is we cleared the reservation
+	 * (well, potentially we did). We do a trick here thus if we
+	 * are not a level 0 exception (we interrupted the TLB miss) we
+	 * offset the return address by -4 in order to replay the tlbsrx
+	 * instruction there
+	 */
+	subf	r10,r13,r12
+	cmpldi	cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+	bne-	1f
+	ld	r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+	addi	r10,r11,-4
+	std	r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+1:
+	/* Return to caller, normal case */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK);
+	TLB_MISS_EPILOG_SUCCESS
+	rfi
+
+virt_page_table_tlb_miss_fault:
+	/* If we fault here, things are a little bit tricky. We need to call
+	 * either data or instruction store fault, and we need to retreive
+	 * the original fault address and ESR (for data).
+	 *
+	 * The thing is, we know that in normal circumstances, this is
+	 * always called as a second level tlb miss for SW load or as a first
+	 * level TLB miss for HW load, so we should be able to peek at the
+	 * relevant informations in the first exception frame in the PACA.
+	 *
+	 * However, we do need to double check that, because we may just hit
+	 * a stray kernel pointer or a userland attack trying to hit those
+	 * areas. If that is the case, we do a data fault. (We can't get here
+	 * from an instruction tlb miss anyway).
+	 *
+	 * Note also that when going to a fault, we must unwind the previous
+	 * level as well. Since we are doing that, we don't need to clear or
+	 * restore the TLB reservation neither.
+	 */
+	subf	r10,r13,r12
+	cmpldi	cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+	bne-	virt_page_table_tlb_miss_whacko_fault
+
+	/* We dig the original DEAR and ESR from slot 0 */
+	ld	r15,EX_TLB_DEAR+PACA_EXTLB(r13)
+	ld	r16,EX_TLB_ESR+PACA_EXTLB(r13)
+
+	/* We check for the "special" ESR value for instruction faults */
+	cmpdi	cr0,r16,-1
+	beq	1f
+	mtspr	SPRN_DEAR,r15
+	mtspr	SPRN_ESR,r16
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT);
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT);
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+virt_page_table_tlb_miss_whacko_fault:
+	/* The linear fault will restart everything so ESR and DEAR will
+	 * not have been clobbered, let's just fault with what we have
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT);
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+
+
+/**************************************************************
+ *                                                            *
+ * TLB miss handling for Book3E with hw page table support    *
+ *                                                            *
+ **************************************************************/
+
+
+/* Data TLB miss */
+	START_EXCEPTION(data_tlb_miss_htw)
+	TLB_MISS_PROLOG
+
+	/* Now we handle the fault proper. We only save DEAR in normal
+	 * fault case since that's the only interesting values here.
+	 * We could probably also optimize by not saving SRR0/1 in the
+	 * linear mapping case but I'll leave that for later
+	 */
+	mfspr	r14,SPRN_ESR
+	mfspr	r16,SPRN_DEAR		/* get faulting address */
+	srdi	r11,r16,60		/* get region */
+	cmpldi	cr0,r11,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	cmpldi	cr0,r11,0		/* Check for user region */
+	ld	r15,PACAPGD(r13)	/* Load user pgdir */
+	beq	htw_tlb_miss
+
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r11,8		/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1		/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	ld	r15,PACA_KERNELPGD(r13)	/* Load kernel pgdir */
+	beq+	htw_tlb_miss
+
+	/* We got a crappy address, just fault with whatever DEAR and ESR
+	 * are here
+	 */
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+
+/* Instruction TLB miss */
+	START_EXCEPTION(instruction_tlb_miss_htw)
+	TLB_MISS_PROLOG
+
+	/* If we take a recursive fault, the second level handler may need
+	 * to know whether we are handling a data or instruction fault in
+	 * order to get to the right store fault handler. We provide that
+	 * info by keeping a crazy value for ESR in r14
+	 */
+	li	r14,-1	/* store to exception frame is done later */
+
+	/* Now we handle the fault proper. We only save DEAR in the non
+	 * linear mapping case since we know the linear mapping case will
+	 * not re-enter. We could indeed optimize and also not save SRR0/1
+	 * in the linear mapping case but I'll leave that for later
+	 *
+	 * Faulting address is SRR0 which is already in r16
+	 */
+	srdi	r11,r16,60		/* get region */
+	cmpldi	cr0,r11,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	cmpldi	cr0,r11,0			/* Check for user region */
+	ld	r15,PACAPGD(r13)		/* Load user pgdir */
+	beq	htw_tlb_miss
+
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r11,8			/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1			/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	ld	r15,PACA_KERNELPGD(r13)		/* Load kernel pgdir */
+	beq+	htw_tlb_miss
+
+	/* We got a crappy address, just fault */
+	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = PGD pointer
+ * r14 = ESR
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will save/restore things for us
+ */
+htw_tlb_miss:
+	/* Search if we already have a TLB entry for that virtual address, and
+	 * if we do, bail out.
+	 *
+	 * MAS1:IND should be already set based on MAS4
+	 */
+	PPC_TLBSRX_DOT(0,r16)
+	beq	htw_tlb_miss_done
+
+	/* Now, we need to walk the page tables. First check if we are in
+	 * range.
+	 */
+	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+	bne-	htw_tlb_miss_fault
+
+	/* Get the PGD pointer */
+	cmpldi	cr0,r15,0
+	beq-	htw_tlb_miss_fault
+
+	/* Get to PGD entry */
+	rldicl	r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	htw_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+	/* Get to PUD entry */
+	rldicl	r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	htw_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+	/* Get to PMD entry */
+	rldicl	r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	htw_tlb_miss_fault
+
+	/* Ok, we're all right, we can now create an indirect entry for
+	 * a 1M or 256M page.
+	 *
+	 * The last trick is now that because we use "half" pages for
+	 * the HTW (1M IND is 2K and 256M IND is 32K) we need to account
+	 * for an added LSB bit to the RPN. For 64K pages, there is no
+	 * problem as we already use 32K arrays (half PTE pages), but for
+	 * 4K page we need to extract a bit from the virtual address and
+	 * insert it into the "PA52" bit of the RPN.
+	 */
+#ifndef CONFIG_PPC_64K_PAGES
+	rlwimi	r15,r16,32-9,20,20
+#endif
+	/* Now we build the MAS:
+	 *
+	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
+	 * MAS 1   :	Almost fully setup
+	 *               - PID already updated by caller if necessary
+	 *               - TSIZE for now is base ind page size always
+	 * MAS 2   :	Use defaults
+	 * MAS 3+7 :	Needs to be done
+	 */
+#ifdef CONFIG_PPC_64K_PAGES
+	ori	r10,r15,(BOOK3E_PAGESZ_64K << MAS3_SPSIZE_SHIFT)
+#else
+	ori	r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+#endif
+	mtspr	SPRN_MAS7_MAS3,r10
+
+	tlbwe
+
+htw_tlb_miss_done:
+	/* We don't bother with restoring DEAR or ESR since we know we are
+	 * level 0 and just going back to userland. They are only needed
+	 * if you are going to take an access fault
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK)
+	TLB_MISS_EPILOG_SUCCESS
+	rfi
+
+htw_tlb_miss_fault:
+	/* We need to check if it was an instruction miss. We know this
+	 * though because r14 would contain -1
+	 */
+	cmpdi	cr0,r14,-1
+	beq	1f
+	mtspr	SPRN_DEAR,r16
+	mtspr	SPRN_ESR,r14
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+/*
+ * This is the guts of "any" level TLB miss handler for kernel linear
+ * mapping misses. We are entered with:
+ *
+ *
+ * r16 = faulting address
+ * r15 = crap (free to use)
+ * r14 = ESR (data) or -1 (instruction)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * In addition we know that we will not re-enter, so in theory, we could
+ * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later.
+ *
+ * We also need to be careful about MAS registers here & TLB reservation,
+ * as we know we'll have clobbered them if we interrupt the main TLB miss
+ * handlers in which case we probably want to do a full restart at level
+ * 0 rather than saving / restoring the MAS.
+ *
+ * Note: If we care about performance of that core, we can easily shuffle
+ *       a few things around
+ */
+tlb_load_linear:
+	/* For now, we assume the linear mapping is contiguous and stops at
+	 * linear_map_top. We also assume the size is a multiple of 1G, thus
+	 * we only use 1G pages for now. That might have to be changed in a
+	 * final implementation, especially when dealing with hypervisors
+	 */
+	ld	r11,PACATOC(r13)
+	ld	r11,linear_map_top@got(r11)
+	ld	r10,0(r11)
+	cmpld	cr0,r10,r16
+	bge	tlb_load_linear_fault
+
+	/* MAS1 need whole new setup. */
+	li	r15,(BOOK3E_PAGESZ_1GB<<MAS1_TSIZE_SHIFT)
+	oris	r15,r15,MAS1_VALID@h	/* MAS1 needs V and TSIZE */
+	mtspr	SPRN_MAS1,r15
+
+	/* Already somebody there ? */
+	PPC_TLBSRX_DOT(0,r16)
+	beq	tlb_load_linear_done
+
+	/* Now we build the remaining MAS. MAS0 and 2 should be fine
+	 * with their defaults, which leaves us with MAS 3 and 7. The
+	 * mapping is linear, so we just take the address, clear the
+	 * region bits, and or in the permission bits which are currently
+	 * hard wired
+	 */
+	clrrdi	r10,r16,30		/* 1G page index */
+	clrldi	r10,r10,4		/* clear region bits */
+	ori	r10,r10,MAS3_SR|MAS3_SW|MAS3_SX
+	mtspr	SPRN_MAS7_MAS3,r10
+
+	tlbwe
+
+tlb_load_linear_done:
+	/* We use the "error" epilog for success as we do want to
+	 * restore to the initial faulting context, whatever it was.
+	 * We do that because we can't resume a fault within a TLB
+	 * miss handler, due to MAS and TLB reservation being clobbered.
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_LINEAR)
+	TLB_MISS_EPILOG_ERROR
+	rfi
+
+tlb_load_linear_fault:
+	/* We keep the DEAR and ESR around, this shouldn't have happened */
+	cmpdi	cr0,r14,-1
+	beq	1f
+	TLB_MISS_EPILOG_ERROR_SPECIAL
+	b	exc_data_storage_book3e
+1:	TLB_MISS_EPILOG_ERROR_SPECIAL
+	b	exc_instruction_storage_book3e
+
+
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+.tlb_stat_inc:
+1:	ldarx	r8,0,r9
+	addi	r8,r8,1
+	stdcx.	r8,0,r9
+	bne-	1b
+	blr
+#endif
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 6b43fc49f10..d16100c9416 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -7,8 +7,8 @@
  *
  *  -- BenH
  *
- * Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org>
- *                IBM Corp.
+ * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org>
+ *                     IBM Corp.
  *
  *  Derived from arch/ppc/mm/init.c:
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
@@ -34,12 +34,70 @@
 #include <linux/pagemap.h>
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
+#include <linux/lmb.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
+#include <asm/code-patching.h>
 
 #include "mmu_decl.h"
 
+#ifdef CONFIG_PPC_BOOK3E
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+	[MMU_PAGE_4K] = {
+		.shift	= 12,
+		.enc	= BOOK3E_PAGESZ_4K,
+	},
+	[MMU_PAGE_16K] = {
+		.shift	= 14,
+		.enc	= BOOK3E_PAGESZ_16K,
+	},
+	[MMU_PAGE_64K] = {
+		.shift	= 16,
+		.enc	= BOOK3E_PAGESZ_64K,
+	},
+	[MMU_PAGE_1M] = {
+		.shift	= 20,
+		.enc	= BOOK3E_PAGESZ_1M,
+	},
+	[MMU_PAGE_16M] = {
+		.shift	= 24,
+		.enc	= BOOK3E_PAGESZ_16M,
+	},
+	[MMU_PAGE_256M] = {
+		.shift	= 28,
+		.enc	= BOOK3E_PAGESZ_256M,
+	},
+	[MMU_PAGE_1G] = {
+		.shift	= 30,
+		.enc	= BOOK3E_PAGESZ_1GB,
+	},
+};
+static inline int mmu_get_tsize(int psize)
+{
+	return mmu_psize_defs[psize].enc;
+}
+#else
+static inline int mmu_get_tsize(int psize)
+{
+	/* This isn't used on !Book3E for now */
+	return 0;
+}
+#endif
+
+/* The variables below are currently only used on 64-bit Book3E
+ * though this will probably be made common with other nohash
+ * implementations at some point
+ */
+#ifdef CONFIG_PPC64
+
+int mmu_linear_psize;		/* Page size used for the linear mapping */
+int mmu_pte_psize;		/* Page size used for PTE pages */
+int book3e_htw_enabled;		/* Is HW tablewalk enabled ? */
+unsigned long linear_map_top;	/* Top of linear mapping */
+
+#endif /* CONFIG_PPC64 */
+
 /*
  * Base TLB flushing operations:
  *
@@ -82,7 +140,7 @@ void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 {
 	__local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
-			       0 /* tsize unused for now */, 0);
+			       mmu_get_tsize(mmu_virtual_psize), 0);
 }
 EXPORT_SYMBOL(local_flush_tlb_page);
 
@@ -198,7 +256,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 {
 	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
-			 0 /* tsize unused for now */, 0);
+			 mmu_get_tsize(mmu_virtual_psize), 0);
 }
 EXPORT_SYMBOL(flush_tlb_page);
 
@@ -241,3 +299,140 @@ void tlb_flush(struct mmu_gather *tlb)
 	/* Push out batch of freed page tables */
 	pte_free_finish();
 }
+
+/*
+ * Below are functions specific to the 64-bit variant of Book3E though that
+ * may change in the future
+ */
+
+#ifdef CONFIG_PPC64
+
+/*
+ * Handling of virtual linear page tables or indirect TLB entries
+ * flushing when PTE pages are freed
+ */
+void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
+{
+	int tsize = mmu_psize_defs[mmu_pte_psize].enc;
+
+	if (book3e_htw_enabled) {
+		unsigned long start = address & PMD_MASK;
+		unsigned long end = address + PMD_SIZE;
+		unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
+
+		/* This isn't the most optimal, ideally we would factor out the
+		 * while preempt & CPU mask mucking around, or even the IPI but
+		 * it will do for now
+		 */
+		while (start < end) {
+			__flush_tlb_page(tlb->mm, start, tsize, 1);
+			start += size;
+		}
+	} else {
+		unsigned long rmask = 0xf000000000000000ul;
+		unsigned long rid = (address & rmask) | 0x1000000000000000ul;
+		unsigned long vpte = address & ~rmask;
+
+#ifdef CONFIG_PPC_64K_PAGES
+		vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful;
+#else
+		vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful;
+#endif
+		vpte |= rid;
+		__flush_tlb_page(tlb->mm, vpte, tsize, 0);
+	}
+}
+
+/*
+ * Early initialization of the MMU TLB code
+ */
+static void __early_init_mmu(int boot_cpu)
+{
+	extern unsigned int interrupt_base_book3e;
+	extern unsigned int exc_data_tlb_miss_htw_book3e;
+	extern unsigned int exc_instruction_tlb_miss_htw_book3e;
+
+	unsigned int *ibase = &interrupt_base_book3e;
+	unsigned int mas4;
+
+	/* XXX This will have to be decided at runtime, but right
+	 * now our boot and TLB miss code hard wires it
+	 */
+	mmu_linear_psize = MMU_PAGE_1G;
+
+
+	/* Check if HW tablewalk is present, and if yes, enable it by:
+	 *
+	 * - patching the TLB miss handlers to branch to the
+	 *   one dedicates to it
+	 *
+	 * - setting the global book3e_htw_enabled
+	 *
+	 * - Set MAS4:INDD and default page size
+	 */
+
+	/* XXX This code only checks for TLB 0 capabilities and doesn't
+	 *     check what page size combos are supported by the HW. It
+	 *     also doesn't handle the case where a separate array holds
+	 *     the IND entries from the array loaded by the PT.
+	 */
+	if (boot_cpu) {
+		unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+
+		/* Check if HW loader is supported */
+		if ((tlb0cfg & TLBnCFG_IND) &&
+		    (tlb0cfg & TLBnCFG_PT)) {
+			patch_branch(ibase + (0x1c0 / 4),
+			     (unsigned long)&exc_data_tlb_miss_htw_book3e, 0);
+			patch_branch(ibase + (0x1e0 / 4),
+			     (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0);
+			book3e_htw_enabled = 1;
+		}
+		pr_info("MMU: Book3E Page Tables %s\n",
+			book3e_htw_enabled ? "Enabled" : "Disabled");
+	}
+
+	/* Set MAS4 based on page table setting */
+
+	mas4 = 0x4 << MAS4_WIMGED_SHIFT;
+	if (book3e_htw_enabled) {
+		mas4 |= mas4 | MAS4_INDD;
+#ifdef CONFIG_PPC_64K_PAGES
+		mas4 |=	BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
+		mmu_pte_psize = MMU_PAGE_256M;
+#else
+		mas4 |=	BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
+		mmu_pte_psize = MMU_PAGE_1M;
+#endif
+	} else {
+#ifdef CONFIG_PPC_64K_PAGES
+		mas4 |=	BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
+#else
+		mas4 |=	BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
+#endif
+		mmu_pte_psize = mmu_virtual_psize;
+	}
+	mtspr(SPRN_MAS4, mas4);
+
+	/* Set the global containing the top of the linear mapping
+	 * for use by the TLB miss code
+	 */
+	linear_map_top = lmb_end_of_DRAM();
+
+	/* A sync won't hurt us after mucking around with
+	 * the MMU configuration
+	 */
+	mb();
+}
+
+void __init early_init_mmu(void)
+{
+	__early_init_mmu(1);
+}
+
+void __cpuinit early_init_mmu_secondary(void)
+{
+	__early_init_mmu(0);
+}
+
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index c7d89a0adba..7bcd9fbf6cc 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -191,6 +191,85 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	isync
 1:	wrtee	r10
 	blr
+#elif defined(CONFIG_PPC_BOOK3E)
+/*
+ * New Book3E (>= 2.06) implementation
+ *
+ * Note: We may be able to get away without the interrupt masking stuff
+ * if we save/restore MAS6 on exceptions that might modify it
+ */
+_GLOBAL(_tlbil_pid)
+	slwi	r4,r3,MAS6_SPID_SHIFT
+	mfmsr	r10
+	wrteei	0
+	mtspr	SPRN_MAS6,r4
+	PPC_TLBILX_PID(0,0)
+	wrtee	r10
+	msync
+	isync
+	blr
+
+_GLOBAL(_tlbil_pid_noind)
+	slwi	r4,r3,MAS6_SPID_SHIFT
+	mfmsr	r10
+	ori	r4,r4,MAS6_SIND
+	wrteei	0
+	mtspr	SPRN_MAS6,r4
+	PPC_TLBILX_PID(0,0)
+	wrtee	r10
+	msync
+	isync
+	blr
+
+_GLOBAL(_tlbil_all)
+	PPC_TLBILX_ALL(0,0)
+	msync
+	isync
+	blr
+
+_GLOBAL(_tlbil_va)
+	mfmsr	r10
+	wrteei	0
+	cmpwi	cr0,r6,0
+	slwi	r4,r4,MAS6_SPID_SHIFT
+	rlwimi	r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+	beq	1f
+	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
+	PPC_TLBILX_VA(0,r3)
+	msync
+	isync
+	wrtee	r10
+	blr
+
+_GLOBAL(_tlbivax_bcast)
+	mfmsr	r10
+	wrteei	0
+	cmpwi	cr0,r6,0
+	slwi	r4,r4,MAS6_SPID_SHIFT
+	rlwimi	r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+	beq	1f
+	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
+	PPC_TLBIVAX(0,r3)
+	eieio
+	tlbsync
+	sync
+	wrtee	r10
+	blr
+
+_GLOBAL(set_context)
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r4, 0x4(r5)
+#endif
+	mtspr	SPRN_PID,r3
+	isync			/* Force context change */
+	blr
 #else
 #error Unsupported processor type !
 #endif
-- 
cgit v1.2.3


From 32a74949b7337726e76d69f51c48715431126c6c Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:58 +0000
Subject: powerpc/mm: Add support for SPARSEMEM_VMEMMAP on 64-bit Book3E

The base TLB support didn't include support for SPARSEMEM_VMEMMAP, though
we did carve out some virtual space for it, the necessary support code
wasn't there. This implements it by using 16M pages for now, though the
page size could easily be changed at runtime if necessary.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h    |  1 +
 arch/powerpc/include/asm/pgtable-ppc64.h |  3 +-
 arch/powerpc/mm/init_64.c                | 55 ++++++++++++++++++++++++++++----
 arch/powerpc/mm/mmu_decl.h               |  7 +++-
 arch/powerpc/mm/pgtable_64.c             |  2 +-
 arch/powerpc/mm/tlb_nohash.c             | 11 ++++++-
 6 files changed, 68 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 6ddbe48d07f..d7458046936 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -196,6 +196,7 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 #endif
 
 extern int mmu_linear_psize;
+extern int mmu_vmemmap_psize;
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 7254c5a3187..200ec2dfa03 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -46,6 +46,7 @@
 /*
  * The vmalloc space starts at the beginning of that region, and
  * occupies half of it on hash CPUs and a quarter of it on Book3E
+ * (we keep a quarter for the virtual memmap)
  */
 #define VMALLOC_START	KERN_VIRT_START
 #ifdef CONFIG_PPC_BOOK3E
@@ -83,7 +84,7 @@
 
 #define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
 #define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
-#define VMEMMAP_REGION_ID	(0xfUL)
+#define VMEMMAP_REGION_ID	(0xfUL)	/* Server only */
 #define USER_REGION_ID		(0UL)
 
 /*
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 68a821add28..31582329cd6 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -205,6 +205,47 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
 	return 0;
 }
 
+/* On hash-based CPUs, the vmemmap is bolted in the hash table.
+ *
+ * On Book3E CPUs, the vmemmap is currently mapped in the top half of
+ * the vmalloc space using normal page tables, though the size of
+ * pages encoded in the PTEs can be different
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+static void __meminit vmemmap_create_mapping(unsigned long start,
+					     unsigned long page_size,
+					     unsigned long phys)
+{
+	/* Create a PTE encoding without page size */
+	unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED |
+		_PAGE_KERNEL_RW;
+
+	/* PTEs only contain page size encodings up to 32M */
+	BUG_ON(mmu_psize_defs[mmu_vmemmap_psize].enc > 0xf);
+
+	/* Encode the size in the PTE */
+	flags |= mmu_psize_defs[mmu_vmemmap_psize].enc << 8;
+
+	/* For each PTE for that area, map things. Note that we don't
+	 * increment phys because all PTEs are of the large size and
+	 * thus must have the low bits clear
+	 */
+	for (i = 0; i < page_size; i += PAGE_SIZE)
+		BUG_ON(map_kernel_page(start + i, phys, flags));
+}
+#else /* CONFIG_PPC_BOOK3E */
+static void __meminit vmemmap_create_mapping(unsigned long start,
+					     unsigned long page_size,
+					     unsigned long phys)
+{
+	int  mapped = htab_bolt_mapping(start, start + page_size, phys,
+					PAGE_KERNEL, mmu_vmemmap_psize,
+					mmu_kernel_ssize);
+	BUG_ON(mapped < 0);
+}
+#endif /* CONFIG_PPC_BOOK3E */
+
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
@@ -215,8 +256,11 @@ int __meminit vmemmap_populate(struct page *start_page,
 	/* Align to the page size of the linear mapping. */
 	start = _ALIGN_DOWN(start, page_size);
 
+	pr_debug("vmemmap_populate page %p, %ld pages, node %d\n",
+		 start_page, nr_pages, node);
+	pr_debug(" -> map %lx..%lx\n", start, end);
+
 	for (; start < end; start += page_size) {
-		int mapped;
 		void *p;
 
 		if (vmemmap_populated(start, page_size))
@@ -226,13 +270,10 @@ int __meminit vmemmap_populate(struct page *start_page,
 		if (!p)
 			return -ENOMEM;
 
-		pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
-			start, p, __pa(p));
+		pr_debug("      * %016lx..%016lx allocated at %p\n",
+			 start, start + page_size, p);
 
-		mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
-					   pgprot_val(PAGE_KERNEL),
-					   mmu_vmemmap_psize, mmu_kernel_ssize);
-		BUG_ON(mapped < 0);
+		vmemmap_create_mapping(start, page_size, __pa(p));
 	}
 
 	return 0;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 5961c6b739d..d2e5321d5ea 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -121,7 +121,12 @@ extern unsigned int rtas_data, rtas_size;
 struct hash_pte;
 extern struct hash_pte *Hash, *Hash_end;
 extern unsigned long Hash_size, Hash_mask;
-#endif
+
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags);
+#endif /* CONFIG_PPC64 */
 
 extern unsigned long ioremap_bot;
 extern unsigned long __max_low_memory;
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 93ed1a3c872..853d5565eed 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -79,7 +79,7 @@ static void *early_alloc_pgtable(unsigned long size)
  * map_kernel_page adds an entry to the ioremap page table
  * and adds an entry to the HPT, possibly bolting it
  */
-static int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
+int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index d16100c9416..2fbc680c2c7 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -93,6 +93,7 @@ static inline int mmu_get_tsize(int psize)
 
 int mmu_linear_psize;		/* Page size used for the linear mapping */
 int mmu_pte_psize;		/* Page size used for PTE pages */
+int mmu_vmemmap_psize;		/* Page size used for the virtual mem map */
 int book3e_htw_enabled;		/* Is HW tablewalk enabled ? */
 unsigned long linear_map_top;	/* Top of linear mapping */
 
@@ -356,10 +357,18 @@ static void __early_init_mmu(int boot_cpu)
 	unsigned int mas4;
 
 	/* XXX This will have to be decided at runtime, but right
-	 * now our boot and TLB miss code hard wires it
+	 * now our boot and TLB miss code hard wires it. Ideally
+	 * we should find out a suitable page size and patch the
+	 * TLB miss code (either that or use the PACA to store
+	 * the value we want)
 	 */
 	mmu_linear_psize = MMU_PAGE_1G;
 
+	/* XXX This should be decided at runtime based on supported
+	 * page sizes in the TLB, but for now let's assume 16M is
+	 * always there and a good fit (which it probably is)
+	 */
+	mmu_vmemmap_psize = MMU_PAGE_16M;
 
 	/* Check if HW tablewalk is present, and if yes, enable it by:
 	 *
-- 
cgit v1.2.3


From 2d27cfd3286966c04d4192a9db5a6c7ea60eebf1 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:59 +0000
Subject: powerpc: Remaining 64-bit Book3E support

This contains all the bits that didn't fit in previous patches :-) This
includes the actual exception handlers assembly, the changes to the
kernel entry, other misc bits and wiring it all up in Kconfig.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                   |   2 +-
 arch/powerpc/include/asm/hw_irq.h      |   5 +
 arch/powerpc/include/asm/smp.h         |   1 +
 arch/powerpc/kernel/Makefile           |  10 +-
 arch/powerpc/kernel/cputable.c         |  27 +-
 arch/powerpc/kernel/entry_64.S         |  60 ++-
 arch/powerpc/kernel/exceptions-64e.S   | 784 +++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/head_64.S          |  68 ++-
 arch/powerpc/kernel/setup_64.c         |  19 +
 arch/powerpc/mm/Makefile               |   1 +
 arch/powerpc/platforms/Kconfig.cputype |  38 +-
 arch/powerpc/xmon/xmon.c               |   2 +-
 12 files changed, 993 insertions(+), 24 deletions(-)
 create mode 100644 arch/powerpc/kernel/exceptions-64e.S

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 52349ef1b3a..4c0747e8ed7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -472,7 +472,7 @@ config PPC_16K_PAGES
 	bool "16k page size" if 44x
 
 config PPC_64K_PAGES
-	bool "64k page size" if 44x || PPC_STD_MMU_64
+	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 8b505eaaa38..e73d554538d 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void);
 #define raw_irqs_disabled()		(local_get_flags() == 0)
 #define raw_irqs_disabled_flags(flags)	((flags) == 0)
 
+#ifdef CONFIG_PPC_BOOK3E
+#define __hard_irq_enable()	__asm__ __volatile__("wrteei 1": : :"memory");
+#define __hard_irq_disable()	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
 #define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
 #define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+#endif
 
 #define  hard_irq_disable()			\
 	do {					\
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index e782f43ee66..c0d3b8af931 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -153,6 +153,7 @@ extern void arch_send_call_function_ipi(cpumask_t mask);
  * 64-bit but defining them all here doesn't harm
  */
 extern void generic_secondary_smp_init(void);
+extern void generic_secondary_thread_init(void);
 extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b73396b9390..035946f9d5f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -33,10 +33,10 @@ obj-y				:= cputable.o ptrace.o syscalls.o \
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
-				   paca.o cpu_setup_ppc970.o \
-				   cpu_setup_pa6t.o \
-				   firmware.o nvram_64.o
+				   paca.o nvram_64.o firmware.o
+obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
+obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
@@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 obj-$(CONFIG_FSL_BOOKE)		+= cpu_setup_fsl_booke.o dbell.o
 
-extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
-extra-$(CONFIG_PPC64)		:= head_64.o
+extra-y				:= head_$(CONFIG_WORD_SIZE).o
+extra-$(CONFIG_PPC_BOOK3E_32)	:= head_new_booke.o
 extra-$(CONFIG_40x)		:= head_40x.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 4a24a2fc457..f34ea37079b 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -93,7 +93,7 @@ extern void __restore_cpu_power7(void);
 				 PPC_FEATURE_BOOKE)
 
 static struct cpu_spec __initdata cpu_specs[] = {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 	{	/* Power3 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00400000,
@@ -508,7 +508,30 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "power4",
 	}
-#endif	/* CONFIG_PPC64 */
+#endif	/* CONFIG_PPC_BOOK3S_64 */
+#ifdef CONFIG_PPC_BOOK3E_64
+	{	/* This is a default entry to get going, to be replaced by
+		 * a real one at some stage
+		 */
+#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "Book3E",
+		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
+					  MMU_FTR_USE_TLBIVAX_BCAST |
+					  MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 0,
+		.machine_check		= machine_check_generic,
+		.platform		= "power6",
+	},
+#endif
+
 #ifdef CONFIG_PPC32
 #if CLASSIC_PPC
 	{	/* 601 */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 1cb0f3d1714..66bcda34a6b 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION
 2:
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif /* CONFIG_PPC_ISERIES */
+
+	/* Hard enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	mfmsr	r11
 	ori	r11,r11,MSR_EE
 	mtmsrd	r11,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef SHOW_SYSCALLS
 	bl	.do_show_syscall
@@ -168,15 +174,25 @@ syscall_exit:
 #endif
 	clrrdi	r12,r1,THREAD_SHIFT
 
-	/* disable interrupts so current_thread_info()->flags can't change,
-	   and so that we don't get interrupted after loading SRR0/1. */
 	ld	r8,_MSR(r1)
+#ifdef CONFIG_PPC_BOOK3S
+	/* No MSR:RI on BookE */
 	andi.	r10,r8,MSR_RI
 	beq-	unrecov_restore
+#endif
+
+	/* Disable interrupts so current_thread_info()->flags can't change,
+	 * and so that we don't get interrupted after loading SRR0/1.
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r10
 	rldicl	r10,r10,48,1
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
+
 	ld	r9,TI_FLAGS(r12)
 	li	r11,-_LAST_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
@@ -194,9 +210,13 @@ syscall_error_cont:
 	 * userspace and we take an exception after restoring r13,
 	 * we end up corrupting the userspace r13 value.
 	 */
+#ifdef CONFIG_PPC_BOOK3S
+	/* No MSR:RI on BookE */
 	li	r12,MSR_RI
 	andc	r11,r10,r12
 	mtmsrd	r11,1			/* clear MSR.RI */
+#endif /* CONFIG_PPC_BOOK3S */
+
 	beq-	1f
 	ACCOUNT_CPU_USER_EXIT(r11, r12)
 	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
@@ -206,7 +226,7 @@ syscall_error_cont:
 	mtcr	r5
 	mtspr	SPRN_SRR0,r7
 	mtspr	SPRN_SRR1,r8
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 
 syscall_error:	
@@ -276,9 +296,13 @@ syscall_exit_work:
 	beq	.ret_from_except_lite
 
 	/* Re-enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	mfmsr	r10
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	and.	r0,r0,r22
 	beq+	1f
 	andc	r22,r22,r0
-	mtmsrd	r22
+	MTMSRD(r22)
 	isync
 1:	std	r20,_NIP(r1)
 	mfcr	r23
@@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	std	r6,PACACURRENT(r13)	/* Set new 'current' */
 
 	ld	r8,KSP(r4)	/* new stack pointer */
+#ifdef CONFIG_PPC_BOOK3S
 BEGIN_FTR_SECTION
   BEGIN_FTR_SECTION_NESTED(95)
 	clrrdi	r6,r8,28	/* get its ESID */
@@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
 	slbie	r6		/* Workaround POWER5 < DD2.1 issue */
 	slbmte	r7,r0
 	isync
-
 2:
+#endif /* !CONFIG_PPC_BOOK3S */
+
 	clrrdi	r7,r8,THREAD_SHIFT	/* base of new stack */
 	/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
 	   because we don't need to leave the 288-byte ABI gap at the
@@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite)
 	 * can't change between when we test it and when we return
 	 * from the interrupt.
 	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r10		/* Get current interrupt state */
 	rldicl	r9,r10,48,1	/* clear MSR_EE */
 	rotldi	r9,r9,16
 	mtmsrd	r9,1		/* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef CONFIG_PREEMPT
 	clrrdi	r9,r1,THREAD_SHIFT	/* current_thread_info() */
@@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 	rldicl	r4,r3,49,63		/* r0 = (r3 >> 15) & 1 */
 	stb	r4,PACAHARDIRQEN(r13)
 
+#ifdef CONFIG_PPC_BOOK3E
+	b	.exception_return_book3e
+#else
 	ld	r4,_CTR(r1)
 	ld	r0,_LINK(r1)
 	mtctr	r4
@@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 	rfid
 	b	.	/* prevent speculative execution */
 
+#endif /* CONFIG_PPC_BOOK3E */
+
 iseries_check_pending_irqs:
 #ifdef CONFIG_PPC_ISERIES
 	ld	r5,SOFTE(r1)
@@ -638,6 +673,11 @@ do_work:
 	li	r0,1
 	stb	r0,PACASOFTIRQEN(r13)
 	stb	r0,PACAHARDIRQEN(r13)
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+	bl	.preempt_schedule
+	wrteei	0
+#else
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1		/* reenable interrupts */
 	bl	.preempt_schedule
@@ -646,6 +686,7 @@ do_work:
 	rldicl	r10,r10,48,1	/* disable interrupts again */
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
@@ -654,8 +695,12 @@ do_work:
 user_work:
 #endif
 	/* Enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
@@ -837,6 +882,10 @@ _GLOBAL(enter_prom)
 
 	/* Switch MSR to 32 bits mode
 	 */
+#ifdef CONFIG_PPC_BOOK3E
+	rlwinm	r11,r11,0,1,31
+	mtmsr	r11
+#else /* CONFIG_PPC_BOOK3E */
         mfmsr   r11
         li      r12,1
         rldicr  r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
@@ -845,6 +894,7 @@ _GLOBAL(enter_prom)
         rldicr  r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
         andc    r11,r11,r12
         mtmsrd  r11
+#endif /* CONFIG_PPC_BOOK3E */
         isync
 
 	/* Enter PROM here... */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
new file mode 100644
index 00000000000..695d4847d22
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -0,0 +1,784 @@
+/*
+ *  Boot code and exception vectors for Book3E processors
+ *
+ *  Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/setup.h>
+#include <asm/thread_info.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/bug.h>
+#include <asm/irqflags.h>
+#include <asm/ptrace.h>
+#include <asm/ppc-opcode.h>
+#include <asm/mmu.h>
+
+/* XXX This will ultimately add space for a special exception save
+ *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
+ *     when taking special interrupts. For now we don't support that,
+ *     special interrupts from within a non-standard level will probably
+ *     blow you up
+ */
+#define	SPECIAL_EXC_FRAME_SIZE	INT_FRAME_SIZE
+
+/* Exception prolog code for all exceptions */
+#define EXCEPTION_PROLOG(n, type, addition)				    \
+	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
+	mfspr	r13,SPRN_SPRG_PACA;	/* get PACA */			    \
+	std	r10,PACA_EX##type+EX_R10(r13);				    \
+	std	r11,PACA_EX##type+EX_R11(r13);				    \
+	mfcr	r10;			/* save CR */			    \
+	addition;			/* additional code for that exc. */ \
+	std	r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */  \
+	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
+	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
+	type##_SET_KSTACK;		/* get special stack if necessary */\
+	andi.	r10,r11,MSR_PR;		/* save stack pointer */	    \
+	beq	1f;			/* branch around if supervisor */   \
+	ld	r1,PACAKSAVE(r13);	/* get kernel stack coming from usr */\
+1:	cmpdi	cr1,r1,0;		/* check if SP makes sense */	    \
+	bge-	cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
+	mfspr	r10,SPRN_##type##_SRR0;	/* read SRR0 before touching stack */
+
+/* Exception type-specific macros */
+#define	GEN_SET_KSTACK							    \
+	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack */
+#define SPRN_GEN_SRR0	SPRN_SRR0
+#define SPRN_GEN_SRR1	SPRN_SRR1
+
+#define CRIT_SET_KSTACK						            \
+	ld	r1,PACA_CRIT_STACK(r13);				    \
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_CRIT_SRR0	SPRN_CSRR0
+#define SPRN_CRIT_SRR1	SPRN_CSRR1
+
+#define DBG_SET_KSTACK						            \
+	ld	r1,PACA_DBG_STACK(r13);					    \
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_DBG_SRR0	SPRN_DSRR0
+#define SPRN_DBG_SRR1	SPRN_DSRR1
+
+#define MC_SET_KSTACK						            \
+	ld	r1,PACA_MC_STACK(r13);					    \
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_MC_SRR0	SPRN_MCSRR0
+#define SPRN_MC_SRR1	SPRN_MCSRR1
+
+#define NORMAL_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, GEN, addition##_GEN)
+
+#define CRIT_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, CRIT, addition##_CRIT)
+
+#define DBG_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, DBG, addition##_DBG)
+
+#define MC_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, MC, addition##_MC)
+
+
+/* Variants of the "addition" argument for the prolog
+ */
+#define PROLOG_ADDITION_NONE_GEN
+#define PROLOG_ADDITION_NONE_CRIT
+#define PROLOG_ADDITION_NONE_DBG
+#define PROLOG_ADDITION_NONE_MC
+
+#define PROLOG_ADDITION_MASKABLE_GEN					    \
+	lbz	r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */	    \
+	cmpwi	cr0,r11,0;		/* yes -> go out of line */	    \
+	beq	masked_interrupt_book3e;
+
+#define PROLOG_ADDITION_2REGS_GEN					    \
+	std	r14,PACA_EXGEN+EX_R14(r13);				    \
+	std	r15,PACA_EXGEN+EX_R15(r13)
+
+#define PROLOG_ADDITION_1REG_GEN					    \
+	std	r14,PACA_EXGEN+EX_R14(r13);
+
+#define PROLOG_ADDITION_2REGS_CRIT					    \
+	std	r14,PACA_EXCRIT+EX_R14(r13);				    \
+	std	r15,PACA_EXCRIT+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_DBG					    \
+	std	r14,PACA_EXDBG+EX_R14(r13);				    \
+	std	r15,PACA_EXDBG+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_MC					    \
+	std	r14,PACA_EXMC+EX_R14(r13);				    \
+	std	r15,PACA_EXMC+EX_R15(r13)
+
+/* Core exception code for all exceptions except TLB misses.
+ * XXX: Needs to make SPRN_SPRG_GEN depend on exception type
+ */
+#define EXCEPTION_COMMON(n, excf, ints)					    \
+	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
+	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
+	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
+	std	r10,_NIP(r1);		/* save SRR0 to stackframe */	    \
+	std	r11,_MSR(r1);		/* save SRR1 to stackframe */	    \
+	ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */	    \
+	ld	r3,excf+EX_R10(r13);	/* get back r10 */		    \
+	ld	r4,excf+EX_R11(r13);	/* get back r11 */		    \
+	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */		    \
+	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
+	ld	r2,PACATOC(r13);	/* get kernel TOC into r2 */	    \
+	mflr	r6;			/* save LR in stackframe */	    \
+	mfctr	r7;			/* save CTR in stackframe */	    \
+	mfspr	r8,SPRN_XER;		/* save XER in stackframe */	    \
+	ld	r9,excf+EX_R1(r13);	/* load orig r1 back from PACA */   \
+	lwz	r10,excf+EX_CR(r13);	/* load orig CR back from PACA	*/  \
+	lbz	r11,PACASOFTIRQEN(r13);	/* get current IRQ softe */	    \
+	ld	r12,exception_marker@toc(r2);				    \
+	li	r0,0;							    \
+	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
+	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
+	std	r5,GPR13(r1);		/* save it to stackframe */	    \
+	std	r6,_LINK(r1);						    \
+	std	r7,_CTR(r1);						    \
+	std	r8,_XER(r1);						    \
+	li	r3,(n)+1;		/* indicate partial regs in trap */ \
+	std	r9,0(r1);		/* store stack frame back link */   \
+	std	r10,_CCR(r1);		/* store orig CR in stackframe */   \
+	std	r9,GPR1(r1);		/* store stack frame back link */   \
+	std	r11,SOFTE(r1);		/* and save it to stackframe */     \
+	std	r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */	    \
+	std	r3,_TRAP(r1);		/* set trap number		*/  \
+	std	r0,RESULT(r1);		/* clear regs->result */	    \
+	ints;
+
+/* Variants for the "ints" argument */
+#define INTS_KEEP
+#define INTS_DISABLE_SOFT						    \
+	stb	r0,PACASOFTIRQEN(r13);	/* mark interrupts soft-disabled */ \
+	TRACE_DISABLE_INTS;
+#define INTS_DISABLE_HARD						    \
+	stb	r0,PACAHARDIRQEN(r13); /* and hard disabled */
+#define INTS_DISABLE_ALL						    \
+	INTS_DISABLE_SOFT						    \
+	INTS_DISABLE_HARD
+
+/* This is called by exceptions that used INTS_KEEP (that is did not clear
+ * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE
+ * to it's previous value
+ *
+ * XXX In the long run, we may want to open-code it in order to separate the
+ *     load from the wrtee, thus limiting the latency caused by the dependency
+ *     but at this point, I'll favor code clarity until we have a near to final
+ *     implementation
+ */
+#define INTS_RESTORE_HARD						    \
+	ld	r11,_MSR(r1);						    \
+	wrtee	r11;
+
+/* XXX FIXME: Restore r14/r15 when necessary */
+#define BAD_STACK_TRAMPOLINE(n)						    \
+exc_##n##_bad_stack:							    \
+	li	r1,(n);			/* get exception number */	    \
+	sth	r1,PACA_TRAP_SAVE(r13);	/* store trap */		    \
+	b	bad_stack_book3e;	/* bad stack error */
+
+#define	EXCEPTION_STUB(loc, label)					\
+	. = interrupt_base_book3e + loc;				\
+	nop;	/* To make debug interrupts happy */			\
+	b	exc_##label##_book3e;
+
+#define ACK_NONE(r)
+#define ACK_DEC(r)							\
+	lis	r,TSR_DIS@h;						\
+	mtspr	SPRN_TSR,r
+#define ACK_FIT(r)							\
+	lis	r,TSR_FIS@h;						\
+	mtspr	SPRN_TSR,r
+
+#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack)			\
+	START_EXCEPTION(label);						\
+	NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE)	\
+	EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL)		\
+	ack(r8);							\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
+	bl	hdlr;							\
+	b	.ret_from_except_lite;
+
+/* This value is used to mark exception frames on the stack. */
+	.section	".toc","aw"
+exception_marker:
+	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
+
+
+/*
+ * And here we have the exception vectors !
+ */
+
+	.text
+	.balign	0x1000
+	.globl interrupt_base_book3e
+interrupt_base_book3e:					/* fake trap */
+	/* Note: If real debug exceptions are supported by the HW, the vector
+	 * below will have to be patched up to point to an appropriate handler
+	 */
+	EXCEPTION_STUB(0x000, machine_check)		/* 0x0200 */
+	EXCEPTION_STUB(0x020, critical_input)		/* 0x0580 */
+	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
+	EXCEPTION_STUB(0x060, data_storage)		/* 0x0300 */
+	EXCEPTION_STUB(0x080, instruction_storage)	/* 0x0400 */
+	EXCEPTION_STUB(0x0a0, external_input)		/* 0x0500 */
+	EXCEPTION_STUB(0x0c0, alignment)		/* 0x0600 */
+	EXCEPTION_STUB(0x0e0, program)			/* 0x0700 */
+	EXCEPTION_STUB(0x100, fp_unavailable)		/* 0x0800 */
+	EXCEPTION_STUB(0x120, system_call)		/* 0x0c00 */
+	EXCEPTION_STUB(0x140, ap_unavailable)		/* 0x0f20 */
+	EXCEPTION_STUB(0x160, decrementer)		/* 0x0900 */
+	EXCEPTION_STUB(0x180, fixed_interval)		/* 0x0980 */
+	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
+	EXCEPTION_STUB(0x1c0, data_tlb_miss)
+	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+
+#if 0
+	EXCEPTION_STUB(0x280, processor_doorbell)
+	EXCEPTION_STUB(0x220, processor_doorbell_crit)
+#endif
+	.globl interrupt_end_book3e
+interrupt_end_book3e:
+
+/* Critical Input Interrupt */
+	START_EXCEPTION(critical_input);
+	CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
+//	EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL)
+//	bl	special_reg_save_crit
+//	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	bl	.critical_exception
+//	b	ret_from_crit_except
+	b	.
+
+/* Machine Check Interrupt */
+	START_EXCEPTION(machine_check);
+	CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE)
+//	EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL)
+//	bl	special_reg_save_mc
+//	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	bl	.machine_check_exception
+//	b	ret_from_mc_except
+	b	.
+
+/* Data Storage Interrupt */
+	START_EXCEPTION(data_storage)
+	NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS)
+	mfspr	r14,SPRN_DEAR
+	mfspr	r15,SPRN_ESR
+	EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP)
+	b	storage_fault_common
+
+/* Instruction Storage Interrupt */
+	START_EXCEPTION(instruction_storage);
+	NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS)
+	li	r15,0
+	mr	r14,r10
+	EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP)
+	b	storage_fault_common
+
+/* External Input Interrupt */
+	MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE)
+
+/* Alignment */
+	START_EXCEPTION(alignment);
+	NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS)
+	mfspr	r14,SPRN_DEAR
+	mfspr	r15,SPRN_ESR
+	EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP)
+	b	alignment_more	/* no room, go out of line */
+
+/* Program Interrupt */
+	START_EXCEPTION(program);
+	NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG)
+	mfspr	r14,SPRN_ESR
+	EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT)
+	std	r14,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r14,PACA_EXGEN+EX_R14(r13)
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.program_check_exception
+	b	.ret_from_except
+
+/* Floating Point Unavailable Interrupt */
+	START_EXCEPTION(fp_unavailable);
+	NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE)
+	/* we can probably do a shorter exception entry for that one... */
+	EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP)
+	bne	1f			/* if from user, just load it up */
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	INTS_RESTORE_HARD
+	bl	.kernel_fp_unavailable_exception
+	BUG_OPCODE
+1:	ld	r12,_MSR(r1)
+	bl	.load_up_fpu
+	b	fast_exception_return
+
+/* Decrementer Interrupt */
+	MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC)
+
+/* Fixed Interval Timer Interrupt */
+	MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT)
+
+/* Watchdog Timer Interrupt */
+	START_EXCEPTION(watchdog);
+	CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
+//	EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL)
+//	bl	special_reg_save_crit
+//	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	bl	.unknown_exception
+//	b	ret_from_crit_except
+	b	.
+
+/* System Call Interrupt */
+	START_EXCEPTION(system_call)
+	mr	r9,r13			/* keep a copy of userland r13 */
+	mfspr	r11,SPRN_SRR0		/* get return address */
+	mfspr	r12,SPRN_SRR1		/* get previous MSR */
+	mfspr	r13,SPRN_SPRG_PACA	/* get our PACA */
+	b	system_call_common
+
+/* Auxillary Processor Unavailable Interrupt */
+	START_EXCEPTION(ap_unavailable);
+	NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
+	EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.unknown_exception
+	b	.ret_from_except
+
+/* Debug exception as a critical interrupt*/
+	START_EXCEPTION(debug_crit);
+	CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+	/*
+	 * If there is a single step or branch-taken exception in an
+	 * exception entry sequence, it was probably meant to apply to
+	 * the code where the exception occurred (since exception entry
+	 * doesn't turn off DE automatically).  We simulate the effect
+	 * of turning off DE on entry to an exception handler by turning
+	 * off DE in the CSRR1 value and clearing the debug status.
+	 */
+
+	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
+	andis.	r15,r14,DBSR_IC@h
+	beq+	1f
+
+	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	cmpld	cr0,r10,r14
+	cmpld	cr1,r10,r15
+	blt+	cr0,1f
+	bge+	cr1,1f
+
+	/* here it looks like we got an inappropriate debug exception. */
+	lis	r14,DBSR_IC@h		/* clear the IC event */
+	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the CSRR1 value */
+	mtspr	SPRN_DBSR,r14
+	mtspr	SPRN_CSRR1,r11
+	lwz	r10,PACA_EXCRIT+EX_CR(r13)	/* restore registers */
+	ld	r1,PACA_EXCRIT+EX_R1(r13)
+	ld	r14,PACA_EXCRIT+EX_R14(r13)
+	ld	r15,PACA_EXCRIT+EX_R15(r13)
+	mtcr	r10
+	ld	r10,PACA_EXCRIT+EX_R10(r13)	/* restore registers */
+	ld	r11,PACA_EXCRIT+EX_R11(r13)
+	mfspr	r13,SPRN_SPRG_CRIT_SCRATCH
+	rfci
+
+	/* Normal debug exception */
+	/* XXX We only handle coming from userspace for now since we can't
+	 *     quite save properly an interrupted kernel state yet
+	 */
+1:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
+	beq	kernel_dbg_exc;		/* if from kernel mode */
+
+	/* Now we mash up things to make it look like we are coming on a
+	 * normal exception
+	 */
+	mfspr	r15,SPRN_SPRG_CRIT_SCRATCH
+	mtspr	SPRN_SPRG_GEN_SCRATCH,r15
+	mfspr	r14,SPRN_DBSR
+	EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL)
+	std	r14,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r14
+	ld	r14,PACA_EXCRIT+EX_R14(r13)
+	ld	r15,PACA_EXCRIT+EX_R15(r13)
+	bl	.save_nvgprs
+	bl	.DebugException
+	b	.ret_from_except
+
+kernel_dbg_exc:
+	b	.	/* NYI */
+
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt_book3e:
+	mtcr	r10
+	stb	r11,PACAHARDIRQEN(r13)
+	mfspr	r10,SPRN_SRR1
+	rldicl	r11,r10,48,1		/* clear MSR_EE */
+	rotldi	r10,r11,16
+	mtspr	SPRN_SRR1,r10
+	ld	r10,PACA_EXGEN+EX_R10(r13);	/* restore registers */
+	ld	r11,PACA_EXGEN+EX_R11(r13);
+	mfspr	r13,SPRN_SPRG_GEN_SCRATCH;
+	rfi
+	b	.
+
+/*
+ * This is called from 0x300 and 0x400 handlers after the prologs with
+ * r14 and r15 containing the fault address and error code, with the
+ * original values stashed away in the PACA
+ */
+storage_fault_common:
+	std	r14,_DAR(r1)
+	std	r15,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r14
+	mr	r5,r15
+	ld	r14,PACA_EXGEN+EX_R14(r13)
+	ld	r15,PACA_EXGEN+EX_R15(r13)
+	INTS_RESTORE_HARD
+	bl	.do_page_fault
+	cmpdi	r3,0
+	bne-	1f
+	b	.ret_from_except_lite
+1:	bl	.save_nvgprs
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r4,_DAR(r1)
+	bl	.bad_page_fault
+	b	.ret_from_except
+
+/*
+ * Alignment exception doesn't fit entirely in the 0x100 bytes so it
+ * continues here.
+ */
+alignment_more:
+	std	r14,_DAR(r1)
+	std	r15,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r14,PACA_EXGEN+EX_R14(r13)
+	ld	r15,PACA_EXGEN+EX_R15(r13)
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.alignment_exception
+	b	.ret_from_except
+
+/*
+ * We branch here from entry_64.S for the last stage of the exception
+ * return code path. MSR:EE is expected to be off at that point
+ */
+_GLOBAL(exception_return_book3e)
+	b	1f
+
+/* This is the return from load_up_fpu fast path which could do with
+ * less GPR restores in fact, but for now we have a single return path
+ */
+	.globl fast_exception_return
+fast_exception_return:
+	wrteei	0
+1:	mr	r0,r13
+	ld	r10,_MSR(r1)
+	REST_4GPRS(2, r1)
+	andi.	r6,r10,MSR_PR
+	REST_2GPRS(6, r1)
+	beq	1f
+	ACCOUNT_CPU_USER_EXIT(r10, r11)
+	ld	r0,GPR13(r1)
+
+1:	stdcx.	r0,0,r1		/* to clear the reservation */
+
+	ld	r8,_CCR(r1)
+	ld	r9,_LINK(r1)
+	ld	r10,_CTR(r1)
+	ld	r11,_XER(r1)
+	mtcr	r8
+	mtlr	r9
+	mtctr	r10
+	mtxer	r11
+	REST_2GPRS(8, r1)
+	ld	r10,GPR10(r1)
+	ld	r11,GPR11(r1)
+	ld	r12,GPR12(r1)
+	mtspr	SPRN_SPRG_GEN_SCRATCH,r0
+
+	std	r10,PACA_EXGEN+EX_R10(r13);
+	std	r11,PACA_EXGEN+EX_R11(r13);
+	ld	r10,_NIP(r1)
+	ld	r11,_MSR(r1)
+	ld	r0,GPR0(r1)
+	ld	r1,GPR1(r1)
+	mtspr	SPRN_SRR0,r10
+	mtspr	SPRN_SRR1,r11
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
+	rfi
+
+/*
+ * Trampolines used when spotting a bad kernel stack pointer in
+ * the exception entry code.
+ *
+ * TODO: move some bits like SRR0 read to trampoline, pass PACA
+ * index around, etc... to handle crit & mcheck
+ */
+BAD_STACK_TRAMPOLINE(0x000)
+BAD_STACK_TRAMPOLINE(0x100)
+BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x400)
+BAD_STACK_TRAMPOLINE(0x500)
+BAD_STACK_TRAMPOLINE(0x600)
+BAD_STACK_TRAMPOLINE(0x700)
+BAD_STACK_TRAMPOLINE(0x800)
+BAD_STACK_TRAMPOLINE(0x900)
+BAD_STACK_TRAMPOLINE(0x980)
+BAD_STACK_TRAMPOLINE(0x9f0)
+BAD_STACK_TRAMPOLINE(0xa00)
+BAD_STACK_TRAMPOLINE(0xb00)
+BAD_STACK_TRAMPOLINE(0xc00)
+BAD_STACK_TRAMPOLINE(0xd00)
+BAD_STACK_TRAMPOLINE(0xe00)
+BAD_STACK_TRAMPOLINE(0xf00)
+BAD_STACK_TRAMPOLINE(0xf20)
+
+	.globl	bad_stack_book3e
+bad_stack_book3e:
+	/* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
+	mfspr	r10,SPRN_SRR0;		  /* read SRR0 before touching stack */
+	ld	r1,PACAEMERGSP(r13)
+	subi	r1,r1,64+INT_FRAME_SIZE
+	std	r10,_NIP(r1)
+	std	r11,_MSR(r1)
+	ld	r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
+	lwz	r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
+	std	r10,GPR1(r1)
+	std	r11,_CCR(r1)
+	mfspr	r10,SPRN_DEAR
+	mfspr	r11,SPRN_ESR
+	std	r10,_DAR(r1)
+	std	r11,_DSISR(r1)
+	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
+	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
+	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
+	ld	r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */		    \
+	ld	r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */		    \
+	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
+	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
+	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
+	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
+	std	r5,GPR13(r1);		/* save it to stackframe */	    \
+	mflr	r10
+	mfctr	r11
+	mfxer	r12
+	std	r10,_LINK(r1)
+	std	r11,_CTR(r1)
+	std	r12,_XER(r1)
+	SAVE_10GPRS(14,r1)
+	SAVE_8GPRS(24,r1)
+	lhz	r12,PACA_TRAP_SAVE(r13)
+	std	r12,_TRAP(r1)
+	addi	r11,r1,INT_FRAME_SIZE
+	std	r11,0(r1)
+	li	r12,0
+	std	r12,0(r11)
+	ld	r2,PACATOC(r13)
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.kernel_bad_stack
+	b	1b
+
+/*
+ * Setup the initial TLB for a core. This current implementation
+ * assume that whatever we are running off will not conflict with
+ * the new mapping at PAGE_OFFSET.
+ * We also make various assumptions about the processor we run on,
+ * this might have to be made more flexible based on the content
+ * of MMUCFG and friends.
+ */
+_GLOBAL(initial_tlb_book3e)
+
+	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
+	 * kernel linear mapping. We also set MAS8 once for all here though
+	 * that will have to be made dependent on whether we are running under
+	 * a hypervisor I suppose.
+	 */
+	li	r3,MAS0_HES | MAS0_WQ_ALLWAYS
+	mtspr	SPRN_MAS0,r3
+	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
+	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
+	mtspr	SPRN_MAS1,r3
+	LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
+	mtspr	SPRN_MAS2,r3
+	li	r3,MAS3_SR | MAS3_SW | MAS3_SX
+	mtspr	SPRN_MAS7_MAS3,r3
+	li	r3,0
+	mtspr	SPRN_MAS8,r3
+
+	/* Write the TLB entry */
+	tlbwe
+
+	/* Now we branch the new virtual address mapped by this entry */
+	LOAD_REG_IMMEDIATE(r3,1f)
+	mtctr	r3
+	bctr
+
+1:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
+	 * else (XXX we should scan for bolted crap from the firmware too)
+	 */
+	PPC_TLBILX(0,0,0)
+	sync
+	isync
+
+	/* We translate LR and return */
+	mflr	r3
+	tovirt(r3,r3)
+	mtlr	r3
+	blr
+
+/*
+ * Main entry (boot CPU, thread 0)
+ *
+ * We enter here from head_64.S, possibly after the prom_init trampoline
+ * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
+ * mode. Anything else is as it was left by the bootloader
+ *
+ * Initial requirements of this port:
+ *
+ * - Kernel loaded at 0 physical
+ * - A good lump of memory mapped 0:0 by UTLB entry 0
+ * - MSR:IS & MSR:DS set to 0
+ *
+ * Note that some of the above requirements will be relaxed in the future
+ * as the kernel becomes smarter at dealing with different initial conditions
+ * but for now you have to be careful
+ */
+_GLOBAL(start_initialization_book3e)
+	mflr	r28
+
+	/* First, we need to setup some initial TLBs to map the kernel
+	 * text, data and bss at PAGE_OFFSET. We don't have a real mode
+	 * and always use AS 0, so we just set it up to match our link
+	 * address and never use 0 based addresses.
+	 */
+	bl	.initial_tlb_book3e
+
+	/* Init global core bits */
+	bl	.init_core_book3e
+
+	/* Init per-thread bits */
+	bl	.init_thread_book3e
+
+	/* Return to common init code */
+	tovirt(r28,r28)
+	mtlr	r28
+	blr
+
+
+/*
+ * Secondary core/processor entry
+ *
+ * This is entered for thread 0 of a secondary core, all other threads
+ * are expected to be stopped. It's similar to start_initialization_book3e
+ * except that it's generally entered from the holding loop in head_64.S
+ * after CPUs have been gathered by Open Firmware.
+ *
+ * We assume we are in 32 bits mode running with whatever TLB entry was
+ * set for us by the firmware or POR engine.
+ */
+_GLOBAL(book3e_secondary_core_init_tlb_set)
+	li	r4,1
+	b	.generic_secondary_smp_init
+
+_GLOBAL(book3e_secondary_core_init)
+	mflr	r28
+
+	/* Do we need to setup initial TLB entry ? */
+	cmplwi	r4,0
+	bne	2f
+
+	/* Setup TLB for this core */
+	bl	.initial_tlb_book3e
+
+	/* We can return from the above running at a different
+	 * address, so recalculate r2 (TOC)
+	 */
+	bl	.relative_toc
+
+	/* Init global core bits */
+2:	bl	.init_core_book3e
+
+	/* Init per-thread bits */
+3:	bl	.init_thread_book3e
+
+	/* Return to common init code at proper virtual address.
+	 *
+	 * Due to various previous assumptions, we know we entered this
+	 * function at either the final PAGE_OFFSET mapping or using a
+	 * 1:1 mapping at 0, so we don't bother doing a complicated check
+	 * here, we just ensure the return address has the right top bits.
+	 *
+	 * Note that if we ever want to be smarter about where we can be
+	 * started from, we have to be careful that by the time we reach
+	 * the code below we may already be running at a different location
+	 * than the one we were called from since initial_tlb_book3e can
+	 * have moved us already.
+	 */
+	cmpdi	cr0,r28,0
+	blt	1f
+	lis	r3,PAGE_OFFSET@highest
+	sldi	r3,r3,32
+	or	r28,r28,r3
+1:	mtlr	r28
+	blr
+
+_GLOBAL(book3e_secondary_thread_init)
+	mflr	r28
+	b	3b
+
+_STATIC(init_core_book3e)
+	/* Establish the interrupt vector base */
+	LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+	mtspr	SPRN_IVPR,r3
+	sync
+	blr
+
+_STATIC(init_thread_book3e)
+	lis	r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
+	mtspr	SPRN_EPCR,r3
+
+	/* Make sure interrupts are off */
+	wrteei	0
+
+	/* disable watchdog and FIT and enable DEC interrupts */
+	lis	r3,TCR_DIE@h
+	mtspr	SPRN_TCR,r3
+
+	blr
+
+
+
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 0552f01041a..c38afdb45d7 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -121,10 +121,11 @@ __run_at_load:
  */
 	.globl	__secondary_hold
 __secondary_hold:
+#ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
-
+#endif
 	/* Grab our physical cpu number */
 	mr	r24,r3
 
@@ -143,6 +144,7 @@ __secondary_hold:
 	ld	r4,0(r4)		/* deref function descriptor */
 	mtctr	r4
 	mr	r3,r24
+	li	r4,0
 	bctr
 #else
 	BUG_OPCODE
@@ -163,21 +165,49 @@ exception_marker:
 #include "exceptions-64s.S"
 #endif
 
+_GLOBAL(generic_secondary_thread_init)
+	mr	r24,r3
+
+	/* turn on 64-bit mode */
+	bl	.enable_64b_mode
+
+	/* get a valid TOC pointer, wherever we're mapped at */
+	bl	.relative_toc
+
+#ifdef CONFIG_PPC_BOOK3E
+	/* Book3E initialization */
+	mr	r3,r24
+	bl	.book3e_secondary_thread_init
+#endif
+	b	generic_secondary_common_init
 
 /*
  * On pSeries and most other platforms, secondary processors spin
  * in the following code.
  * At entry, r3 = this processor's number (physical cpu id)
+ *
+ * On Book3E, r4 = 1 to indicate that the initial TLB entry for
+ * this core already exists (setup via some other mechanism such
+ * as SCOM before entry).
  */
 _GLOBAL(generic_secondary_smp_init)
 	mr	r24,r3
-	
+	mr	r25,r4
+
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
 
-	/* get the TOC pointer (real address) */
+	/* get a valid TOC pointer, wherever we're mapped at */
 	bl	.relative_toc
 
+#ifdef CONFIG_PPC_BOOK3E
+	/* Book3E initialization */
+	mr	r3,r24
+	mr	r4,r25
+	bl	.book3e_secondary_core_init
+#endif
+
+generic_secondary_common_init:
 	/* Set up a paca value for this processor. Since we have the
 	 * physical cpu id in r24, we need to search the pacas to find
 	 * which logical id maps to our physical one.
@@ -196,6 +226,11 @@ _GLOBAL(generic_secondary_smp_init)
 	b	.kexec_wait		/* next kernel might do better	 */
 
 2:	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG */
+#ifdef CONFIG_PPC_BOOK3E
+	addi	r12,r13,PACA_EXTLB	/* and TLB exc frame in another  */
+	mtspr	SPRN_SPRG_TLB_EXFRAME,r12
+#endif
+
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
 3:	HMT_LOW
@@ -231,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init)
  * Turn the MMU off.
  * Assumes we're mapped EA == RA if the MMU is on.
  */
+#ifdef CONFIG_PPC_BOOK3S
 _STATIC(__mmu_off)
 	mfmsr	r3
 	andi.	r0,r3,MSR_IR|MSR_DR
@@ -242,6 +278,7 @@ _STATIC(__mmu_off)
 	sync
 	rfid
 	b	.	/* prevent speculative execution */
+#endif
 
 
 /*
@@ -279,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform)
 	mr	r31,r3
 	mr	r30,r4
 
+#ifdef CONFIG_PPC_BOOK3E
+	bl	.start_initialization_book3e
+	b	.__after_prom_start
+#else
 	/* Setup some critical 970 SPRs before switching MMU off */
 	mfspr	r0,SPRN_PVR
 	srwi	r0,r0,16
@@ -296,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform)
 	/* Switch off MMU if not already off */
 	bl	.__mmu_off
 	b	.__after_prom_start
+#endif /* CONFIG_PPC_BOOK3E */
 
 _INIT_STATIC(__boot_from_prom)
 #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
@@ -358,10 +400,16 @@ _STATIC(__after_prom_start)
  * Note: This process overwrites the OF exception vectors.
  */
 	li	r3,0			/* target addr */
+#ifdef CONFIG_PPC_BOOK3E
+	tovirt(r3,r3)			/* on booke, we already run at PAGE_OFFSET */
+#endif
 	mr.	r4,r26			/* In some cases the loader may  */
 	beq	9f			/* have already put us at zero */
 	li	r6,0x100		/* Start offset, the first 0x100 */
 					/* bytes were copied earlier.	 */
+#ifdef CONFIG_PPC_BOOK3E
+	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
+#endif
 
 #ifdef CONFIG_CRASH_DUMP
 /*
@@ -507,6 +555,9 @@ _GLOBAL(pmac_secondary_start)
  *   r13       = paca virtual address
  *   SPRG_PACA = paca virtual address
  */
+	.section ".text";
+	.align 2 ;
+
 	.globl	__secondary_start
 __secondary_start:
 	/* Set thread priority to MEDIUM */
@@ -543,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 
 /* 
@@ -564,11 +615,16 @@ _GLOBAL(start_secondary_prolog)
  */
 _GLOBAL(enable_64b_mode)
 	mfmsr	r11			/* grab the current MSR */
+#ifdef CONFIG_PPC_BOOK3E
+	oris	r11,r11,0x8000		/* CM bit set, we'll set ICM later */
+	mtmsr	r11
+#else /* CONFIG_PPC_BOOK3E */
 	li	r12,(MSR_SF | MSR_ISF)@highest
 	sldi	r12,r12,48
 	or	r11,r11,r12
 	mtmsrd	r11
 	isync
+#endif
 	blr
 
 /*
@@ -612,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform)
 	bdnz	3b
 4:
 
+#ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r6
 	ori	r6,r6,MSR_RI
 	mtmsrd	r6			/* RI on */
+#endif
 
 #ifdef CONFIG_RELOCATABLE
 	/* Save the physical address we're running at in kernstart_addr */
@@ -647,7 +705,7 @@ _INIT_STATIC(start_here_multiplatform)
 	ld	r4,PACAKMSR(r13)
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 	
 	/* This is where all platforms converge execution */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 65aced7b833..87df5172064 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -454,6 +454,24 @@ static void __init irqstack_early_init(void)
 #define irqstack_early_init()
 #endif
 
+#ifdef CONFIG_PPC_BOOK3E
+static void __init exc_lvl_early_init(void)
+{
+	unsigned int i;
+
+	for_each_possible_cpu(i) {
+		critirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		dbgirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		mcheckirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+	}
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
 /*
  * Stack space used when we detect a bad kernel stack pointer, and
  * early in SMP boots before relocation is enabled.
@@ -513,6 +531,7 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.brk = klimit;
 	
 	irqstack_early_init();
+	exc_lvl_early_init();
 	emergency_stack_init();
 
 #ifdef CONFIG_PPC_STD_MMU_64
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 3e68363405b..6fb8fc8d2fe 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -13,6 +13,7 @@ obj-y				:= fault.o mem.o pgtable.o gup.o \
 				   pgtable_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC_MMU_NOHASH)	+= mmu_context_nohash.o tlb_nohash.o \
 				   tlb_nohash_low.o
+obj-$(CONFIG_PPC_BOOK3E)	+= tlb_low_$(CONFIG_WORD_SIZE)e.o
 obj-$(CONFIG_PPC64)		+= mmap_64.o
 hash64-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC_STD_MMU_64)	+= hash_utils_64.o \
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 61187bec750..9efc8bda01b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -57,15 +57,35 @@ config E200
 
 endchoice
 
-config PPC_BOOK3S_64
-	def_bool y
+choice
+	prompt "Processor Type"
 	depends on PPC64
+	help
+	  There are two families of 64 bit PowerPC chips supported.
+	  The most common ones are the desktop and server CPUs
+	  (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...)
+
+	  The other are the "embedded" processors compliant with the
+	  "Book 3E" variant of the architecture
+
+config PPC_BOOK3S_64
+	bool "Server processors"
 	select PPC_FPU
 
+config PPC_BOOK3E_64
+	bool "Embedded processors"
+	select PPC_FPU # Make it a choice ?
+
+endchoice
+
 config PPC_BOOK3S
 	def_bool y
 	depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
 
+config PPC_BOOK3E
+	def_bool y
+	depends on PPC_BOOK3E_64
+
 config POWER4_ONLY
 	bool "Optimize for POWER4"
 	depends on PPC64 && PPC_BOOK3S
@@ -125,7 +145,7 @@ config 4xx
 
 config BOOKE
 	bool
-	depends on E200 || E500 || 44x
+	depends on E200 || E500 || 44x || PPC_BOOK3E
 	default y
 
 config FSL_BOOKE
@@ -223,9 +243,17 @@ config PPC_MMU_NOHASH
 	def_bool y
 	depends on !PPC_STD_MMU
 
+config PPC_MMU_NOHASH_32
+	def_bool y
+	depends on PPC_MMU_NOHASH && PPC32
+
+config PPC_MMU_NOHASH_64
+	def_bool y
+	depends on PPC_MMU_NOHASH && PPC64
+
 config PPC_BOOK3E_MMU
 	def_bool y
-	depends on FSL_BOOKE
+	depends on FSL_BOOKE || PPC_BOOK3E
 
 config PPC_MM_SLICES
 	bool
@@ -257,7 +285,7 @@ config PPC_PERF_CTRS
          This enables the powerpc-specific perf_counter back-end.
 
 config SMP
-	depends on PPC_STD_MMU || FSL_BOOKE
+	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index e1f33a81e5e..0e09a45ac79 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2570,7 +2570,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 	printf("%s", after);
 }
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 static void dump_slb(void)
 {
 	int i;
-- 
cgit v1.2.3


From af984b816530b4725b92e01ecfba7c5e3eab910d Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 6 Aug 2009 13:50:58 +1000
Subject: powerpc/mm: Fix encoding of page table cache numbers

The mask used to encode the page table cache number in the
batch when freeing page tables was too small for the new
possible values of MMU page sizes. This increases it along
with a comment explaining the constraints.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgalloc.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 34b080671f0..f2e812de7c3 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -28,7 +28,12 @@ typedef struct pgtable_free {
 	unsigned long val;
 } pgtable_free_t;
 
-#define PGF_CACHENUM_MASK	0x7
+/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
+ * and small enough to fit in the low bits of any naturally aligned page
+ * table cache entry. Arbitrarily set to 0x1f, that should give us some
+ * room to grow
+ */
+#define PGF_CACHENUM_MASK	0x1f
 
 static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 						unsigned long mask)
-- 
cgit v1.2.3


From 67050b5c3e9992d98554bd224d5a7898cc4881ff Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 4 Aug 2009 22:33:32 -0500
Subject: powerpc/mm: Fix switch_mmu_context to iterate of the proper list of
 cpus

Introduced a temporary variable into our iterating over the list cpus
that are threads on the same core.  For some reason Ben forgot how for
loops work.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/mmu_context_nohash.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 834436d6d6b..c2f93dc470e 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -190,7 +190,7 @@ static void context_check_map(void) { }
 
 void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 {
-	unsigned int id, cpu = smp_processor_id();
+	unsigned int i, id, cpu = smp_processor_id();
 	unsigned long *map;
 
 	/* No lockless fast path .. yet */
@@ -269,9 +269,10 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 		local_flush_tlb_mm(next);
 
 		/* XXX This clear should ultimately be part of local_flush_tlb_mm */
-		for (cpu = cpu_first_thread_in_core(cpu);
-		     cpu <= cpu_last_thread_in_core(cpu); cpu++)
-			__clear_bit(id, stale_map[cpu]);
+		for (i = cpu_first_thread_in_core(cpu);
+		     i <= cpu_last_thread_in_core(cpu); i++) {
+			__clear_bit(id, stale_map[i]);
+		}
 	}
 
 	/* Flick the MMU and release lock */
-- 
cgit v1.2.3


From 20d70345f181be6bdd5b0a76a408d0693683bf3d Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 07:04:46 +0000
Subject: powerpc: Add AMCC 460EX/460GT Rev. B support to cputable.c

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f34ea37079b..9f38ecb1785 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1653,7 +1653,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.platform		= "ppc440",
 	},
 	{ /* 460EX */
-		.pvr_mask		= 0xffff0002,
+		.pvr_mask		= 0xffff0006,
 		.pvr_value		= 0x13020002,
 		.cpu_name		= "460EX",
 		.cpu_features		= CPU_FTRS_440x6,
@@ -1665,8 +1665,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 460EX Rev B */
+		.pvr_mask		= 0xffff0007,
+		.pvr_value		= 0x13020004,
+		.cpu_name		= "460EX Rev. B",
+		.cpu_features		= CPU_FTRS_440x6,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_44x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460ex,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
 	{ /* 460GT */
-		.pvr_mask		= 0xffff0002,
+		.pvr_mask		= 0xffff0006,
 		.pvr_value		= 0x13020000,
 		.cpu_name		= "460GT",
 		.cpu_features		= CPU_FTRS_440x6,
@@ -1678,6 +1691,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 460GT Rev B */
+		.pvr_mask		= 0xffff0007,
+		.pvr_value		= 0x13020005,
+		.cpu_name		= "460GT Rev. B",
+		.cpu_features		= CPU_FTRS_440x6,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_44x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460gt,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
 	{ /* 460SX */
 		.pvr_mask		= 0xffffff00,
 		.pvr_value		= 0x13541800,
-- 
cgit v1.2.3


From 88eeb72ec4c1ed7defff0f154c5b56798e038e2a Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 07:05:01 +0000
Subject: powerpc/44x: Add NAND support to Canyonlands dts

Also some whitespace cleanup in the USB device nodes.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/canyonlands.dts | 49 +++++++++++++++++++++++++----------
 1 file changed, 36 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 5fd1ad09bdf..c920170b7df 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AMCC Canyonlands (460EX)
  *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -149,19 +149,19 @@
 					/*RXDE*/  0x5 0x4>;
 		};
 
-                USB0: ehci@bffd0400 {
-                        compatible = "ibm,usb-ehci-460ex", "usb-ehci";
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1d 4>;
-                        reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
-                };
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
 
-                USB1: usb@bffd0000 {
-                        compatible = "ohci-le";
-                        reg = <4 0xbffd0000 0x60>;
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1e 4>;
-                };
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
@@ -215,6 +215,29 @@
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
-- 
cgit v1.2.3


From 13ae564f1db967dd4ea244f21f3dad6a28fa351c Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 01:40:56 +0000
Subject: powerpc/40x: Update Kilauea dts to support NAND, RTC and HWMON

This patch adds support for the following devices to the Kilauea dts:
- PPC4xx NAND controller (NDFC)
- I2C RTC (Dallas DS1338)
- I2C HWMON (Dallas DS1775)

Additionally the partitioning of the NOR FLASH is changed. The dtb
partition has been missing. Fixed in this patch.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/kilauea.dts | 44 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 5e6b08ff6f6..c46561456ed 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AMCC Kilauea (405EX)
  *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -150,7 +150,11 @@
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0x00000000 0x00200000>;
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "root";
@@ -169,6 +173,29 @@
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600200 {
@@ -198,6 +225,18 @@
 				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rtc@68 {
+					compatible = "dallas,ds1338";
+					reg = <0x68>;
+				};
+
+				dtt@48 {
+					compatible = "dallas,ds1775";
+					reg = <0x48>;
+				};
 			};
 
 			IIC1: i2c@ef600500 {
@@ -207,7 +246,6 @@
 				interrupts = <0x7 0x4>;
 			};
 
-
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
 				reg = <0xef600b00 0x00000104>;
-- 
cgit v1.2.3


From 0e8e844246fcf9c38906b62e5d05891dbbda5754 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 07:05:11 +0000
Subject: powerpc/44x: Update Canyonlands defconfig to support NOR, NAND and
 RTC

This patch adds support for the following devices to the Canyonlands
defconfig file:
- NOR FLASH
- PPC4xx NAND controller (NDFC)
- I2C RTC (M41T80)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/44x/canyonlands_defconfig | 350 +++++++++++++++++++++----
 1 file changed, 297 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 5e85412eb9f..b312b166be6 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Mon Feb  2 13:13:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 17:27:20 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,6 +75,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -93,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -104,23 +113,30 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -139,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_ARCHES is not set
 CONFIG_CANYONLANDS=y
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -218,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -237,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -265,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -375,7 +402,101 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
@@ -418,7 +539,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -439,6 +564,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -457,6 +584,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -467,7 +595,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -542,7 +669,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -608,14 +734,17 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -640,6 +769,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -654,11 +784,14 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -666,6 +799,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -700,24 +834,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -759,6 +878,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -767,9 +887,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -789,11 +909,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_LIBUSUAL=y
 
@@ -821,7 +941,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -837,6 +956,7 @@ CONFIG_USB_LIBUSUAL=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -844,9 +964,70 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -860,11 +1041,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -873,6 +1055,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -906,6 +1093,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -916,6 +1104,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -927,7 +1116,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -941,8 +1129,48 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -957,11 +1185,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -979,6 +1209,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -989,6 +1222,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1000,7 +1236,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1008,27 +1243,36 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
-- 
cgit v1.2.3


From 6b045a818f1d0b9b68c1d47e745d521dd115991a Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 01:41:06 +0000
Subject: powerpc/40x: Update kilauea defconfig to support NAND, RTC and HWMON

This patch adds support for the following devices to the Kilauea
defconfig file:
- PPC4xx NAND controller (NDFC)
- I2C RTC (Dallas DS1338)
- I2C HWMON (Dallas DS1775)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/40x/kilauea_defconfig | 298 +++++++++++++++++++++++++----
 1 file changed, 256 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 865725effe9..9a05ec0ec31 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Wed Jun  3 10:18:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 13:28:37 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -32,11 +32,11 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -57,6 +57,7 @@ CONFIG_PPC_DCR_NATIVE=y
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +109,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +121,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +144,11 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +232,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +252,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -344,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -393,9 +407,8 @@ CONFIG_MTD_OF_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -452,7 +465,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -465,6 +488,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -504,14 +528,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -546,6 +573,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -621,20 +649,150 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -649,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -691,10 +840,69 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -708,11 +916,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -818,6 +1027,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +1058,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +1072,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +1085,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -891,6 +1102,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-- 
cgit v1.2.3


From 189339d47d30ad171aa1c95ffc90a6177b3ce4a8 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 30 Jul 2009 17:56:38 -0500
Subject: powerpc/85xx: Move mpc8536ds.dts to address-cells/size-cells = <2>

Change the top-level #address-cells and #size-cells to <2> so the
mpc8536ds.dts is easier to deal with both a true 32-bit physical
or 36-bit physical address space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8536ds.dts | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index e781ad2f1f8..22caf69e6ef 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -14,8 +14,8 @@
 / {
 	model = "fsl,mpc8536ds";
 	compatible = "fsl,mpc8536ds";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -42,7 +42,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 00000000>;	// Filled by U-Boot
+		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
 	soc@ffe00000 {
@@ -50,7 +50,7 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "simple-bus";
-		ranges = <0x0 0xffe00000 0x100000>;
+		ranges = <0x0 0 0xffe00000 0x100000>;
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		ecm-law@0 {
@@ -347,13 +347,13 @@
 		interrupt-parent = <&mpic>;
 		interrupts = <24 0x2>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe08000 0x1000>;
+		reg = <0 0xffe08000 0 0x1000>;
 	};
 
 	pci1: pcie@ffe09000 {
@@ -362,10 +362,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe09000 0x1000>;
+		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <25 0x2>;
@@ -398,10 +398,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0a000 0x1000>;
+		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 0x2>;
@@ -434,10 +434,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0b000 0x1000>;
+		reg = <0 0xffe0b000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <27 0x2>;
-- 
cgit v1.2.3


From b6c316a1f6447d6dd0fd8d443b66643e328e04fa Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 30 Jul 2009 17:56:54 -0500
Subject: powerpc/85xx: Added 36-bit physical device tree for mpc8536ds board

Added a device tree that should be similiar to mpc8536ds.dtb except
the physical addresses for all IO are above the 4G boundary.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8536ds_36b.dts | 467 ++++++++++++++++++++++++++++++++
 1 file changed, 467 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/mpc8536ds_36b.dts

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
new file mode 100644
index 00000000000..113ed8b7c89
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -0,0 +1,467 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	soc@fffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8536-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8536-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0 0x1>;
+				interrupt-parent = <&mpic>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
+			reg = <0x21300 4>;
+			ranges = <0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 0x1>;
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 0x1>;
+					reg = <1>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		usb@2b000 {
+			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+			reg = <0x2b000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <60 0x2>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@fffe08000 {
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1
+			0x8800 0 0 2 &mpic 2 1
+			0x8800 0 0 3 &mpic 3 1
+			0x8800 0 0 4 &mpic 4 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 0x2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe08000 0 0x1000>;
+	};
+
+	pci1: pcie@fffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@fffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@fffe0b000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <27 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
-- 
cgit v1.2.3


From 8dcd038a13b8e322c49fe0d3e31a0deaba4fd5fd Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 6 Aug 2009 16:00:37 -0700
Subject: powerpc/fsl-booke: read buffer overflow

cam[tlbcam_index] is checked before tlbcam_index < ARRAY_SIZE(cam)

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/fsl_booke_mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index bb3d65998e6..dc93e95b256 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -161,7 +161,7 @@ unsigned long __init mmu_mapin_ram(void)
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
 
-	while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) {
+	while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
 		settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
 		virt += cam[tlbcam_index];
 		phys += cam[tlbcam_index];
-- 
cgit v1.2.3


From 6c75933c00049bee59562a18843a4f133ec2bfe4 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 7 Aug 2009 09:00:34 +0200
Subject: powerpc/fsl_rio: Add kmalloc NULL tests

Check that the result of kmalloc/kzalloc is not NULL before dereferencing it.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
identifier f;
constant char *C;
@@

x = \(kmalloc\|kcalloc\|kzalloc\)(...);
... when != x == NULL
    when != x != NULL
    when != (x || ...)
(
kfree(x)
|
f(...,C,...,x,...)
|
*f(...,x,...)
|
*x->f
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_rio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index cbb3bed75d3..757a83fe5e5 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1057,6 +1057,10 @@ int fsl_rio_setup(struct of_device *dev)
 			law_start, law_size);
 
 	ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	if (!ops) {
+		rc = -ENOMEM;
+		goto err_ops;
+	}
 	ops->lcread = fsl_local_config_read;
 	ops->lcwrite = fsl_local_config_write;
 	ops->cread = fsl_rio_config_read;
@@ -1064,6 +1068,10 @@ int fsl_rio_setup(struct of_device *dev)
 	ops->dsend = fsl_rio_doorbell_send;
 
 	port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+	if (!port) {
+		rc = -ENOMEM;
+		goto err_port;
+	}
 	port->id = 0;
 	port->index = 0;
 
@@ -1071,7 +1079,7 @@ int fsl_rio_setup(struct of_device *dev)
 	if (!priv) {
 		printk(KERN_ERR "Can't alloc memory for 'priv'\n");
 		rc = -ENOMEM;
-		goto err;
+		goto err_priv;
 	}
 
 	INIT_LIST_HEAD(&port->dbells);
@@ -1169,11 +1177,13 @@ int fsl_rio_setup(struct of_device *dev)
 
 	return 0;
 err:
-	if (priv)
-		iounmap(priv->regs_win);
-	kfree(ops);
+	iounmap(priv->regs_win);
 	kfree(priv);
+err_priv:
 	kfree(port);
+err_port:
+	kfree(ops);
+err_ops:
 	return rc;
 }
 
-- 
cgit v1.2.3


From 8640d3bf71fa0f25adf86527fe69a32372427d4b Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Wed, 5 Aug 2009 21:41:12 +0200
Subject: powerpc/ipic: unmask all interrupt sources

in case the interrupt controller was used in an earlier life then it is
possible it is that some of its sources were used and are still unmask.
If the (unmasked) device is active and is creating interrupts (or one
interrupts was pending since the interrupts were disabled) then the boot
process "ends" very soon. Once external interrupts are enabled, we land in
-> do_IRQ
  -> call ppc_md.get_irq()
     -> ipic_read() gets the source number
     -> irq_linear_revmap(source)
        -> revmap[source] == NO_IRQ
           -> irq_find_mapping(source) returns NO_IRQ because no source
              is registered
  -> source is NO_IRQ, ppc_spurious_interrupts gets incremented, no
     further action.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/ipic.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 69e2630c906..ebb7e584401 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -781,6 +781,9 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	primary_ipic = ipic;
 	irq_set_default_host(primary_ipic->irqhost);
 
+	ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+	ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+
 	printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS,
 			primary_ipic->regs);
 
-- 
cgit v1.2.3


From 9239c89bc9c51c412b89eb8040077eaaee361326 Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@denx.de>
Date: Mon, 3 Aug 2009 09:34:50 +0200
Subject: powerpc/82xx: mgcoge - updates for 2.6.32

- add I2C support
- add FCC1 and FCC2 support
- fix bogus gpio numbering in plattform code

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mgcoge.dts     | 53 +++++++++++++++++++++++++++
 arch/powerpc/platforms/82xx/mgcoge.c | 69 +++++++++++++++++++++++++++++++-----
 2 files changed, 113 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 633255a9755..0ce96644176 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -162,6 +162,59 @@
 				fixed-link = <0 0 10 0 0>;
 			};
 
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10d40 {
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x10d00 0x14>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fsl,mdio-pin = <12>;
+				fsl,mdc-pin = <13>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			/* FCC1 management to switch */
+			ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+				local-mac-address = [ 00 01 02 03 04 07 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy0>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			/* FCC2 to redundant core unit over backplane */
+			ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				local-mac-address = [ 00 01 02 03 04 08 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy1>;
+				linux,network-index = <2>;
+				fsl,cpm-command = <0x16200300>;
+			};
 		};
 
 		PIC: interrupt-controller@10c00 {
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
index c2af169c1d1..7a5de9eb3c7 100644
--- a/arch/powerpc/platforms/82xx/mgcoge.c
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -50,16 +50,63 @@ struct cpm_pin {
 static __initdata struct cpm_pin mgcoge_pins[] = {
 
 	/* SMC2 */
-	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 
 	/* SCC4 */
-	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{3,  9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{3,  8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2,  9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2,  8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* MDC */
+	{0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+#if defined(CONFIG_I2C_CPM)
+	/* I2C */
+	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+#endif
 };
 
 static void __init init_ioports(void)
@@ -68,12 +115,16 @@ static void __init init_ioports(void)
 
 	for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
 		const struct cpm_pin *pin = &mgcoge_pins[i];
-		cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
 
 	cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9,  CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
 }
 
 static void __init mgcoge_setup_arch(void)
-- 
cgit v1.2.3


From 7a626b66bbd17e775cf2210e560b29383110290e Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 2 Aug 2009 10:44:53 +0200
Subject: powerpc/ipic: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/ipic.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index ebb7e584401..cb7689c4bfb 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -735,8 +735,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
-	if (ipic->irqhost == NULL)
+	if (ipic->irqhost == NULL) {
+		kfree(ipic);
 		return NULL;
+	}
 
 	ipic->regs = ioremap(res.start, res.end - res.start + 1);
 
-- 
cgit v1.2.3


From 3475dd8a68a7c705bee88b143422ba02cb9a796b Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 1 Aug 2009 10:52:51 +0200
Subject: powerpc/qe: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/qe_lib/qe_ic.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 074905c3ee5..3faa42e03a8 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -339,8 +339,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 
 	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
-	if (qe_ic->irqhost == NULL)
+	if (qe_ic->irqhost == NULL) {
+		kfree(qe_ic);
 		return;
+	}
 
 	qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
 
@@ -352,6 +354,7 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 
 	if (qe_ic->virq_low == NO_IRQ) {
 		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+		kfree(qe_ic);
 		return;
 	}
 
-- 
cgit v1.2.3


From fda4bd9bac78efd2f9d566c52956d297bc03e8d9 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 25 Jul 2009 01:42:17 +0400
Subject: powerpc/83xx: Add support for MPC8377E-WLAN boards

MPC8377E-WLAN are basically RDB boards except:

- RAM extended to 512 MB;
- NAND flash removed, NOR flash extended to 64 MB;
- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
- Power management MCU removed;
- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
- USB3300 PHY's ID pin grounded, thus USB port is host-only.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8377_wlan.dts    | 464 ++++++++++++++++++++++++++++++
 arch/powerpc/platforms/83xx/Kconfig       |   4 +-
 arch/powerpc/platforms/83xx/mpc837x_rdb.c |   5 +-
 3 files changed, 469 insertions(+), 4 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mpc8377_wlan.dts

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
new file mode 100644
index 00000000000..3febc4e91b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -0,0 +1,464 @@
+/*
+ * MPC8377E WLAN Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8377wlan";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				reg = <0 0x8000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@a0000 {
+				reg = <0xa0000 0x300000>;
+				label = "kernel";
+			};
+
+			partition@3a0000 {
+				reg = <0x3a0000 0x3c60000>;
+				label = "rootfs";
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				at24@50 {
+					compatible = "at24,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				clock-frequency = <133333333>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x3>;
+					device_type = "ethernet-phy";
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy3>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 083ebee9a16..f49a2548c5f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -75,11 +75,11 @@ config MPC837x_MDS
 	  This option enables support for the MPC837x MDS Processor Board.
 
 config MPC837x_RDB
-	bool "Freescale MPC837x RDB"
+	bool "Freescale MPC837x RDB/WLAN"
 	select DEFAULT_UIMAGE
 	select PPC_MPC837x
 	help
-	  This option enables support for the MPC837x RDB Board.
+	  This option enables support for the MPC837x RDB and WLAN Boards.
 
 config SBC834x
 	bool "Wind River SBC834x"
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 76f3b32a155..91d19ab3a79 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void)
 
 	return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
 	       of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
-	       of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
+	       of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") ||
+	       of_flat_dt_is_compatible(root, "fsl,mpc8377wlan");
 }
 
 define_machine(mpc837x_rdb) {
-	.name			= "MPC837x RDB",
+	.name			= "MPC837x RDB/WLAN",
 	.probe			= mpc837x_rdb_probe,
 	.setup_arch		= mpc837x_rdb_setup_arch,
 	.init_IRQ		= mpc837x_rdb_init_IRQ,
-- 
cgit v1.2.3


From c69328d4b93e6885c897155fbacac69a12c5faef Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 9 Jul 2009 22:36:44 +0400
Subject: powerpc/85xx: Add support for I2C EEPROMs on MPC8548CDS boards

This patch simply adds four eeprom nodes to MPC8548CDS' device tree.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8548cds.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 475be1433fe..4173af387c6 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -100,6 +100,21 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c64";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c64";
+				reg = <0x57>;
+			};
 		};
 
 		i2c@3100 {
@@ -111,6 +126,11 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
 		};
 
 		dma@21300 {
-- 
cgit v1.2.3


From 89f3729642cf33bfbc742b85e134936b562f9731 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 25 Jul 2009 01:42:30 +0400
Subject: powerpc/83xx: Add eSDHC support for MPC837xE-RDB/WLAN boards

Actually, the support is already there, but it requires newer U-Boots
(to fill-in clock-frequency, and setup pin multiplexing).

Though, it appears that on RDB boards USBB pins aren't multiplexed
between USB and eSDHC (unlike MDS boards, where USB and eSDHC share
pctl and pwrfault pins).

So, for RDB boards we can safely setup pinmux and manually fill-in
clock-frequency, thus making eSDHC work even with older u-boots.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8377_rdb.dts     |  2 +-
 arch/powerpc/boot/dts/mpc8378_rdb.dts     |  2 +-
 arch/powerpc/boot/dts/mpc8379_rdb.dts     |  2 +-
 arch/powerpc/platforms/83xx/mpc837x_rdb.c | 23 +++++++++++++++++++++++
 arch/powerpc/platforms/83xx/mpc83xx.h     |  4 ++++
 5 files changed, 30 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 4f06dbc0d27..28e022ac417 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -174,7 +174,7 @@
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index aabf3437cad..a11ead8214b 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -174,7 +174,7 @@
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 9b1da864d89..e35dfba587c 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -172,7 +172,7 @@
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 91d19ab3a79..a1908d26124 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,10 +17,32 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
+static void mpc837x_rdb_sd_cfg(void)
+{
+	void __iomem *im;
+
+	im = ioremap(get_immrbase(), 0x1000);
+	if (!im) {
+		WARN_ON(1);
+		return;
+	}
+
+	/*
+	 * On RDB boards (in contrast to MDS) USBB pins are used for SD only,
+	 * so we can safely mux them away from the USB block.
+	 */
+	clrsetbits_be32(im + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USBB_MASK,
+						 MPC837X_SICRL_SD);
+	clrsetbits_be32(im + MPC83XX_SICRH_OFFS, MPC837X_SICRH_SPI_MASK,
+						 MPC837X_SICRH_SD);
+	iounmap(im);
+}
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -42,6 +64,7 @@ static void __init mpc837x_rdb_setup_arch(void)
 		mpc83xx_add_bridge(np);
 #endif
 	mpc837x_usb_cfg();
+	mpc837x_rdb_sd_cfg();
 }
 
 static struct of_device_id mpc837x_ids[] = {
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index d1dc5b0b4fb..0fea8811d45 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -30,6 +30,8 @@
 #define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
+#define MPC837X_SICRL_USBB_MASK    0x30000000
+#define MPC837X_SICRL_SD           0x20000000
 
 /* system i/o configuration register high */
 #define MPC83XX_SICRH_OFFS         0x118
@@ -38,6 +40,8 @@
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
 #define MPC8315_SICRH_USB_MASK     0x0000ff00
 #define MPC8315_SICRH_USB_ULPI     0x00000000
+#define MPC837X_SICRH_SPI_MASK     0x00000003
+#define MPC837X_SICRH_SD           0x00000001
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
-- 
cgit v1.2.3


From 2eaa50e9670ecab9712317723cb7836a4da1c0dc Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Tue, 30 Jun 2009 15:32:26 +0100
Subject: powerpc/86xx: Correct reading of information presented in cpuinfo

/proc/cpuinfo should be showing the boards revision and the revision of
the FPGA fitted. The functions currently used to access this information
as incorrect.

Additionally the VME geographical address of the PPC9A and it's status as
system contoller are available in the board registers. Show these in
cpuinfo.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/86xx/gef_ppc9a.c | 37 ++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 2efa052975e..287f7bd17dd 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -102,8 +102,8 @@ static unsigned int gef_ppc9a_get_pcb_rev(void)
 {
 	unsigned int reg;
 
-	reg = ioread32(ppc9a_regs);
-	return (reg >> 8) & 0xff;
+	reg = ioread32be(ppc9a_regs);
+	return (reg >> 16) & 0xff;
 }
 
 /* Return the board (software) revision */
@@ -111,8 +111,8 @@ static unsigned int gef_ppc9a_get_board_rev(void)
 {
 	unsigned int reg;
 
-	reg = ioread32(ppc9a_regs);
-	return (reg >> 16) & 0xff;
+	reg = ioread32be(ppc9a_regs);
+	return (reg >> 8) & 0xff;
 }
 
 /* Return the FPGA revision */
@@ -120,8 +120,26 @@ static unsigned int gef_ppc9a_get_fpga_rev(void)
 {
 	unsigned int reg;
 
-	reg = ioread32(ppc9a_regs);
-	return (reg >> 24) & 0xf;
+	reg = ioread32be(ppc9a_regs);
+	return reg & 0xf;
+}
+
+/* Return VME Geographical Address */
+static unsigned int gef_ppc9a_get_vme_geo_addr(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs + 0x4);
+	return reg & 0x1f;
+}
+
+/* Return VME System Controller Status */
+static unsigned int gef_ppc9a_get_vme_is_syscon(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs + 0x4);
+	return (reg >> 9) & 0x1;
 }
 
 static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
@@ -131,10 +149,15 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
-		('A' + gef_ppc9a_get_board_rev() - 1));
+		('A' + gef_ppc9a_get_board_rev()));
 	seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev());
 
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	seq_printf(m, "VME geo. addr\t: %u\n", gef_ppc9a_get_vme_geo_addr());
+
+	seq_printf(m, "VME syscon\t: %s\n",
+		gef_ppc9a_get_vme_is_syscon() ? "yes" : "no");
 }
 
 static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev)
-- 
cgit v1.2.3


From 8798b9df26bbc7f3cee686483a0bac68b666bf8f Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Tue, 30 Jun 2009 15:32:38 +0100
Subject: powerpc/86xx: Enable XMC site on GE Fanuc SBC310

This patch enables the XMC (PCIe daughter card) site on the SBC310.
STG enter the description for the patch above.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/gef_sbc310.dts | 37 ++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 0f4c9ec2c3a..7810ea99554 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -376,4 +376,41 @@
 				  0x0 0x00400000>;
 		};
 	};
+
+	pci1: pcie@fef09000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfef09000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <0x19 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xc0000000
+				  0x02000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
 };
-- 
cgit v1.2.3


From 433abcdf321322495d83c8b571bdf7134622c734 Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Wed, 29 Jul 2009 22:13:45 +0000
Subject: powerpc/86xx: Update GE Fanuc sbc310 DTS

Update GE Fanuc DTS to match the alterations suggested during the merge of
the ppc9a DTS in commit 740d36ae6344f38c4da64c2ede765d7d2dd1f132

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/gef_sbc310.dts | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 7810ea99554..2107d3c7cfe 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -83,34 +83,34 @@
 
 		/* flash@0,0 is a mirror of part of the memory in flash@1,0
 		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
+			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			partition@0 {
 				label = "firmware";
-				reg = <0x00000000 0x01000000>;
+				reg = <0x0 0x01000000>;
 				read-only;
 			};
 		};
 		*/
 
 		flash@1,0 {
-			compatible = "cfi-flash";
-			reg = <1 0 0x8000000>;
+			compatible = "gef,sbc310-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
 			bank-width = <2>;
 			device-width = <2>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			partition@0 {
 				label = "user";
-				reg = <0x00000000 0x07800000>;
+				reg = <0x0 0x7800000>;
 			};
 			partition@7800000 {
 				label = "firmware";
-				reg = <0x07800000 0x00800000>;
+				reg = <0x7800000 0x800000>;
 				read-only;
 			};
 		};
@@ -121,18 +121,16 @@
 		};
 
 		wdt@4,2000 {
-			#interrupt-cells = <2>;
-			device_type = "watchdog";
-			compatible = "gef,fpga-wdt";
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
 			reg = <0x4 0x2000 0x8>;
 			interrupts = <0x1a 0x4>;
 			interrupt-parent = <&gef_pic>;
 		};
 /*
 		wdt@4,2010 {
-			#interrupt-cells = <2>;
-			device_type = "watchdog";
-			compatible = "gef,fpga-wdt";
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
 			reg = <0x4 0x2010 0x8>;
 			interrupts = <0x1b 0x4>;
 			interrupt-parent = <&gef_pic>;
@@ -141,7 +139,7 @@
 		gef_pic: pic@4,4000 {
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			compatible = "gef,fpga-pic";
+			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
 			reg = <0x4 0x4000 0x20>;
 			interrupts = <0x8
 				      0x9>;
@@ -161,7 +159,7 @@
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
-		compatible = "simple-bus";
+		compatible = "fsl,mpc8641-soc", "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
 		bus-frequency = <33333333>;
 
@@ -412,5 +410,4 @@
 				  0x0 0x00400000>;
 		};
 	};
-
 };
-- 
cgit v1.2.3


From 797a747a82e23530ee45d2927bf84f3571c1acb2 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 15:21:40 +0000
Subject: powerpc/mm: Fix assert_pte_locked to work properly on uniprocessor

Since the pte_lockptr is a spinlock it gets optimized away on
uniprocessor builds so using spin_is_locked is not correct.  We can use
assert_spin_locked instead and get the proper behavior between UP and
SMP builds.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index cafb2a26954..b6b32487e74 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -254,7 +254,7 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 	BUG_ON(pud_none(*pud));
 	pmd = pmd_offset(pud, addr);
 	BUG_ON(!pmd_present(*pmd));
-	BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd)));
+	assert_spin_locked(pte_lockptr(mm, pmd));
 }
 #endif /* CONFIG_DEBUG_VM */
 
-- 
cgit v1.2.3


From ae142e0c52b38e44d28b12f77c6e7faa96f7a069 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 12 Jun 2009 04:31:52 +0000
Subject: powerpc/sputrace: Use the generic event tracer

I wrote sputrace before generic tracing infrastrucure was available.
Now that we have the generic event tracer we can convert it over and
remove a lot of code:

  8 files changed, 45 insertions(+), 285 deletions(-)

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
the spufs trace channel by

  echo 1 > /sys/kernel/debug/tracing/events/spufs/spufs_context/enable

and then read the trace records using e.g.

  cat /sys/kernel/debug/tracing/trace

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/Kconfig          |   7 -
 arch/powerpc/platforms/cell/spufs/Makefile   |   3 +-
 arch/powerpc/platforms/cell/spufs/context.c  |   1 +
 arch/powerpc/platforms/cell/spufs/file.c     |   1 +
 arch/powerpc/platforms/cell/spufs/sched.c    |   2 +
 arch/powerpc/platforms/cell/spufs/spufs.h    |   5 -
 arch/powerpc/platforms/cell/spufs/sputrace.c | 272 ---------------------------
 arch/powerpc/platforms/cell/spufs/sputrace.h |  39 ++++
 8 files changed, 45 insertions(+), 285 deletions(-)
 delete mode 100644 arch/powerpc/platforms/cell/spufs/sputrace.c
 create mode 100644 arch/powerpc/platforms/cell/spufs/sputrace.h

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 50f17bdd3c1..48cd7d2e1b7 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -80,13 +80,6 @@ config SPU_FS_64K_LS
 	  uses 4K pages. This can improve performances of applications
 	  using multiple SPEs by lowering the TLB pressure on them.
 
-config SPU_TRACE
-	tristate "SPU event tracing support"
-	depends on SPU_FS && MARKERS
-	help
-	  This option allows reading a trace of spu-related events through
-	  the sputrace file in procfs.
-
 config SPU_BASE
 	bool
 	default n
diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile
index 99610a6361f..b93f877ba50 100644
--- a/arch/powerpc/platforms/cell/spufs/Makefile
+++ b/arch/powerpc/platforms/cell/spufs/Makefile
@@ -4,7 +4,8 @@ spufs-y += inode.o file.o context.o syscalls.o coredump.o
 spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o
 spufs-y += switch.o fault.o lscsa_alloc.o
 
-obj-$(CONFIG_SPU_TRACE)	+= sputrace.o
+# magic for the trace events
+CFLAGS_sched.o := -I$(src)
 
 # Rules to build switch.o with the help of SPU tool chain
 SPU_CROSS	:= spu-
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index db5398c0339..0c87bcd2452 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -28,6 +28,7 @@
 #include <asm/spu.h>
 #include <asm/spu_csa.h>
 #include "spufs.h"
+#include "sputrace.h"
 
 
 atomic_t nr_spu_contexts = ATOMIC_INIT(0);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index d6a519e6e1c..ab8aef9bb8e 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -38,6 +38,7 @@
 #include <asm/uaccess.h>
 
 #include "spufs.h"
+#include "sputrace.h"
 
 #define SPUFS_MMAP_4K (PAGE_SIZE == 0x1000)
 
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index f085369301b..bb5b77c66d0 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -47,6 +47,8 @@
 #include <asm/spu_csa.h>
 #include <asm/spu_priv1.h>
 #include "spufs.h"
+#define CREATE_TRACE_POINTS
+#include "sputrace.h"
 
 struct spu_prio_array {
 	DECLARE_BITMAP(bitmap, MAX_PRIO);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index ae31573bea4..c448bac6551 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -373,9 +373,4 @@ extern void spu_free_lscsa(struct spu_state *csa);
 extern void spuctx_switch_state(struct spu_context *ctx,
 		enum spu_utilization_state new_state);
 
-#define spu_context_trace(name, ctx, spu) \
-	trace_mark(name, "ctx %p spu %p", ctx, spu);
-#define spu_context_nospu_trace(name, ctx) \
-	trace_mark(name, "ctx %p", ctx);
-
 #endif
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
deleted file mode 100644
index d0b1f3f4d9c..00000000000
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2007 IBM Deutschland Entwicklung GmbH
- *	Released under GPL v2.
- *
- * Partially based on net/ipv4/tcp_probe.c.
- *
- * Simple tracing facility for spu contexts.
- */
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/marker.h>
-#include <linux/proc_fs.h>
-#include <linux/wait.h>
-#include <asm/atomic.h>
-#include <asm/uaccess.h>
-#include "spufs.h"
-
-struct spu_probe {
-	const char *name;
-	const char *format;
-	marker_probe_func *probe_func;
-};
-
-struct sputrace {
-	ktime_t tstamp;
-	int owner_tid; /* owner */
-	int curr_tid;
-	const char *name;
-	int number;
-};
-
-static int bufsize __read_mostly = 16384;
-MODULE_PARM_DESC(bufsize, "Log buffer size (number of records)");
-module_param(bufsize, int, 0);
-
-
-static DEFINE_SPINLOCK(sputrace_lock);
-static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait);
-static ktime_t sputrace_start;
-static unsigned long sputrace_head, sputrace_tail;
-static struct sputrace *sputrace_log;
-static int sputrace_logging;
-
-static int sputrace_used(void)
-{
-	return (sputrace_head - sputrace_tail) % bufsize;
-}
-
-static inline int sputrace_avail(void)
-{
-	return bufsize - sputrace_used();
-}
-
-static int sputrace_sprint(char *tbuf, int n)
-{
-	const struct sputrace *t = sputrace_log + sputrace_tail % bufsize;
-	struct timespec tv =
-		ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start));
-
-	return snprintf(tbuf, n,
-		"[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n",
-		(unsigned long) tv.tv_sec,
-		(unsigned long) tv.tv_nsec,
-		t->curr_tid,
-		t->name,
-		t->owner_tid,
-		t->number);
-}
-
-static ssize_t sputrace_read(struct file *file, char __user *buf,
-		size_t len, loff_t *ppos)
-{
-	int error = 0, cnt = 0;
-
-	if (!buf || len < 0)
-		return -EINVAL;
-
-	while (cnt < len) {
-		char tbuf[128];
-		int width;
-
-		/* If we have data ready to return, don't block waiting
-		 * for more */
-		if (cnt > 0 && sputrace_used() == 0)
-			break;
-
-		error = wait_event_interruptible(sputrace_wait,
-						 sputrace_used() > 0);
-		if (error)
-			break;
-
-		spin_lock(&sputrace_lock);
-		if (sputrace_head == sputrace_tail) {
-			spin_unlock(&sputrace_lock);
-			continue;
-		}
-
-		width = sputrace_sprint(tbuf, sizeof(tbuf));
-		if (width < len)
-			sputrace_tail = (sputrace_tail + 1) % bufsize;
-		spin_unlock(&sputrace_lock);
-
-		if (width >= len)
-			break;
-
-		error = copy_to_user(buf + cnt, tbuf, width);
-		if (error)
-			break;
-		cnt += width;
-	}
-
-	return cnt == 0 ? error : cnt;
-}
-
-static int sputrace_open(struct inode *inode, struct file *file)
-{
-	int rc;
-
-	spin_lock(&sputrace_lock);
-	if (sputrace_logging) {
-		rc = -EBUSY;
-		goto out;
-	}
-
-	sputrace_logging = 1;
-	sputrace_head = sputrace_tail = 0;
-	sputrace_start = ktime_get();
-	rc = 0;
-
-out:
-	spin_unlock(&sputrace_lock);
-	return rc;
-}
-
-static int sputrace_release(struct inode *inode, struct file *file)
-{
-	spin_lock(&sputrace_lock);
-	sputrace_logging = 0;
-	spin_unlock(&sputrace_lock);
-	return 0;
-}
-
-static const struct file_operations sputrace_fops = {
-	.owner   = THIS_MODULE,
-	.open    = sputrace_open,
-	.read    = sputrace_read,
-	.release = sputrace_release,
-};
-
-static void sputrace_log_item(const char *name, struct spu_context *ctx,
-		struct spu *spu)
-{
-	spin_lock(&sputrace_lock);
-
-	if (!sputrace_logging) {
-		spin_unlock(&sputrace_lock);
-		return;
-	}
-
-	if (sputrace_avail() > 1) {
-		struct sputrace *t = sputrace_log + sputrace_head;
-
-		t->tstamp = ktime_get();
-		t->owner_tid = ctx->tid;
-		t->name = name;
-		t->curr_tid = current->pid;
-		t->number = spu ? spu->number : -1;
-
-		sputrace_head = (sputrace_head + 1) % bufsize;
-	} else {
-		printk(KERN_WARNING
-		       "sputrace: lost samples due to full buffer.\n");
-	}
-	spin_unlock(&sputrace_lock);
-
-	wake_up(&sputrace_wait);
-}
-
-static void spu_context_event(void *probe_private, void *call_data,
-		const char *format, va_list *args)
-{
-	struct spu_probe *p = probe_private;
-	struct spu_context *ctx;
-	struct spu *spu;
-
-	ctx = va_arg(*args, struct spu_context *);
-	spu = va_arg(*args, struct spu *);
-
-	sputrace_log_item(p->name, ctx, spu);
-}
-
-static void spu_context_nospu_event(void *probe_private, void *call_data,
-		const char *format, va_list *args)
-{
-	struct spu_probe *p = probe_private;
-	struct spu_context *ctx;
-
-	ctx = va_arg(*args, struct spu_context *);
-
-	sputrace_log_item(p->name, ctx, NULL);
-}
-
-struct spu_probe spu_probes[] = {
-	{ "spu_bind_context__enter", "ctx %p spu %p", spu_context_event },
-	{ "spu_unbind_context__enter", "ctx %p spu %p", spu_context_event },
-	{ "spu_get_idle__enter", "ctx %p", spu_context_nospu_event },
-	{ "spu_get_idle__found", "ctx %p spu %p", spu_context_event },
-	{ "spu_get_idle__not_found", "ctx %p", spu_context_nospu_event },
-	{ "spu_find_victim__enter", "ctx %p", spu_context_nospu_event },
-	{ "spusched_tick__preempt", "ctx %p spu %p", spu_context_event },
-	{ "spusched_tick__newslice", "ctx %p", spu_context_nospu_event },
-	{ "spu_yield__enter", "ctx %p", spu_context_nospu_event },
-	{ "spu_deactivate__enter", "ctx %p", spu_context_nospu_event },
-	{ "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event },
-	{ "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event },
-	{ "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event },
-	{ "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event },
-};
-
-static int __init sputrace_init(void)
-{
-	struct proc_dir_entry *entry;
-	int i, error = -ENOMEM;
-
-	sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
-	if (!sputrace_log)
-		goto out;
-
-	entry = proc_create("sputrace", S_IRUSR, NULL, &sputrace_fops);
-	if (!entry)
-		goto out_free_log;
-
-	for (i = 0; i < ARRAY_SIZE(spu_probes); i++) {
-		struct spu_probe *p = &spu_probes[i];
-
-		error = marker_probe_register(p->name, p->format,
-					      p->probe_func, p);
-		if (error)
-			printk(KERN_INFO "Unable to register probe %s\n",
-					p->name);
-	}
-
-	return 0;
-
-out_free_log:
-	kfree(sputrace_log);
-out:
-	return -ENOMEM;
-}
-
-static void __exit sputrace_exit(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spu_probes); i++)
-		marker_probe_unregister(spu_probes[i].name,
-			spu_probes[i].probe_func, &spu_probes[i]);
-
-	remove_proc_entry("sputrace", NULL);
-	kfree(sputrace_log);
-	marker_synchronize_unregister();
-}
-
-module_init(sputrace_init);
-module_exit(sputrace_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.h b/arch/powerpc/platforms/cell/spufs/sputrace.h
new file mode 100644
index 00000000000..db2656aa410
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.h
@@ -0,0 +1,39 @@
+#if !defined(_TRACE_SPUFS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SPUFS_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM spufs
+
+TRACE_EVENT(spufs_context,
+	TP_PROTO(struct spu_context *ctx, struct spu *spu, const char *name),
+	TP_ARGS(ctx, spu, name),
+
+	TP_STRUCT__entry(
+		__field(const char *, name)
+		__field(int, owner_tid)
+		__field(int, number)
+	),
+
+	TP_fast_assign(
+		__entry->name = name;
+		__entry->owner_tid = ctx->tid;
+		__entry->number = spu ? spu->number : -1;
+	),
+
+	TP_printk("%s (ctxthread = %d, spu = %d)",
+		__entry->name, __entry->owner_tid, __entry->number)
+);
+
+#define spu_context_trace(name, ctx, spu) \
+	trace_spufs_context(ctx, spu, __stringify(name))
+#define spu_context_nospu_trace(name, ctx) \
+	trace_spufs_context(ctx, NULL, __stringify(name))
+
+#endif /* _TRACE_SPUFS_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE sputrace
+#include <trace/define_trace.h>
-- 
cgit v1.2.3


From 690a2d074ead1867ca5a1976284ca1c89ebc04c6 Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Thu, 2 Jul 2009 06:12:18 +0000
Subject: powerpc/nvram: Allow byte length reads from mmio NVRAM driver

Add a byte length read and write interface compatible with the
nvram_generic driver interface to the mmio driver.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mmio_nvram.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index 7b49633a4bd..20732420906 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -53,6 +53,23 @@ static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
+static unsigned char mmio_nvram_read_val(int addr)
+{
+	unsigned long flags;
+	unsigned char val;
+
+	if (addr >= mmio_nvram_len)
+		return 0xff;
+
+	spin_lock_irqsave(&mmio_nvram_lock, flags);
+
+	val = ioread8(mmio_nvram_start + addr);
+
+	spin_unlock_irqrestore(&mmio_nvram_lock, flags);
+
+	return val;
+}
+
 static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index)
 {
 	unsigned long flags;
@@ -72,6 +89,19 @@ static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
+void mmio_nvram_write_val(int addr, unsigned char val)
+{
+	unsigned long flags;
+
+	if (addr < mmio_nvram_len) {
+		spin_lock_irqsave(&mmio_nvram_lock, flags);
+
+		iowrite8(val, mmio_nvram_start + addr);
+
+		spin_unlock_irqrestore(&mmio_nvram_lock, flags);
+	}
+}
+
 static ssize_t mmio_nvram_get_size(void)
 {
 	return mmio_nvram_len;
@@ -114,6 +144,8 @@ int __init mmio_nvram_init(void)
 	printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n",
 	       mmio_nvram_len >> 10, nvram_addr, mmio_nvram_start);
 
+	ppc_md.nvram_read_val	= mmio_nvram_read_val;
+	ppc_md.nvram_write_val	= mmio_nvram_write_val;
 	ppc_md.nvram_read	= mmio_nvram_read;
 	ppc_md.nvram_write	= mmio_nvram_write;
 	ppc_md.nvram_size	= mmio_nvram_get_size;
-- 
cgit v1.2.3


From a888ad451a96881a7e40f40f717d05f1f3b26ad4 Mon Sep 17 00:00:00 2001
From: Stoyan Gaydarov <sgayda2@uiuc.edu>
Date: Tue, 21 Jul 2009 17:02:31 +0000
Subject: powerpc: ARRAY_SIZE changes in pasemi and powermac code

These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/

Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pasemi/idle.c      | 2 +-
 arch/powerpc/platforms/powermac/feature.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c
index 43911d8b020..75b296bc51a 100644
--- a/arch/powerpc/platforms/pasemi/idle.c
+++ b/arch/powerpc/platforms/pasemi/idle.c
@@ -90,7 +90,7 @@ machine_late_initcall(pasemi, pasemi_idle_init);
 static int __init idle_param(char *p)
 {
 	int i;
-	for (i = 0; i < sizeof(modes)/sizeof(struct sleep_mode); i++) {
+	for (i = 0; i < ARRAY_SIZE(modes); i++) {
 		if (!strcmp(modes[i].name, p)) {
 			current_mode = i;
 			break;
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index e6c0040ee79..095de3227d8 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2419,13 +2419,13 @@ static int __init probe_motherboard(void)
 	dt = of_find_node_by_name(NULL, "device-tree");
 	if (dt != NULL)
 		model = of_get_property(dt, "model", NULL);
-	for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+	for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) {
 	    if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
 		pmac_mb = pmac_mb_defs[i];
 		goto found;
 	    }
 	}
-	for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+	for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
 	    if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
 		pmac_mb = pmac_mb_defs[i];
 		goto found;
-- 
cgit v1.2.3


From cf68787b68a2011664f1670a827c8f202ddb7c3d Mon Sep 17 00:00:00 2001
From: Benjamin Krill <ben@codiert.org>
Date: Mon, 27 Jul 2009 22:02:39 +0000
Subject: powerpc/prom_init: Evaluate mem kernel parameter for early allocation

Evaluate mem kernel parameter for early memory allocations. If mem is set
no allocation in the region above the given boundary is allowed. The current
code doesn't take care about this and allocate memory above the given mem
boundary.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/prom_init.c | 103 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 101 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index d942404779c..864334b337a 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -190,6 +190,8 @@ static int __initdata of_platform;
 
 static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
 
+static unsigned long __initdata prom_memory_limit;
+
 static unsigned long __initdata alloc_top;
 static unsigned long __initdata alloc_top_high;
 static unsigned long __initdata alloc_bottom;
@@ -484,6 +486,67 @@ static int __init prom_setprop(phandle node, const char *nodename,
 	return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
 }
 
+/* We can't use the standard versions because of RELOC headaches. */
+#define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
+			 || ('a' <= (c) && (c) <= 'f') \
+			 || ('A' <= (c) && (c) <= 'F'))
+
+#define isdigit(c)	('0' <= (c) && (c) <= '9')
+#define islower(c)	('a' <= (c) && (c) <= 'z')
+#define toupper(c)	(islower(c) ? ((c) - 'a' + 'A') : (c))
+
+unsigned long prom_strtoul(const char *cp, const char **endp)
+{
+	unsigned long result = 0, base = 10, value;
+
+	if (*cp == '0') {
+		base = 8;
+		cp++;
+		if (toupper(*cp) == 'X') {
+			cp++;
+			base = 16;
+		}
+	}
+
+	while (isxdigit(*cp) &&
+	       (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
+		result = result * base + value;
+		cp++;
+	}
+
+	if (endp)
+		*endp = cp;
+
+	return result;
+}
+
+unsigned long prom_memparse(const char *ptr, const char **retptr)
+{
+	unsigned long ret = prom_strtoul(ptr, retptr);
+	int shift = 0;
+
+	/*
+	 * We can't use a switch here because GCC *may* generate a
+	 * jump table which won't work, because we're not running at
+	 * the address we're linked at.
+	 */
+	if ('G' == **retptr || 'g' == **retptr)
+		shift = 30;
+
+	if ('M' == **retptr || 'm' == **retptr)
+		shift = 20;
+
+	if ('K' == **retptr || 'k' == **retptr)
+		shift = 10;
+
+	if (shift) {
+		ret <<= shift;
+		(*retptr)++;
+	}
+
+	return ret;
+}
+
 /*
  * Early parsing of the command line passed to the kernel, used for
  * "mem=x" and the options that affect the iommu
@@ -491,9 +554,8 @@ static int __init prom_setprop(phandle node, const char *nodename,
 static void __init early_cmdline_parse(void)
 {
 	struct prom_t *_prom = &RELOC(prom);
-#ifdef CONFIG_PPC64
 	const char *opt;
-#endif
+
 	char *p;
 	int l = 0;
 
@@ -521,6 +583,15 @@ static void __init early_cmdline_parse(void)
 			RELOC(prom_iommu_force_on) = 1;
 	}
 #endif
+	opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
+	if (opt) {
+		opt += 4;
+		RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
+#ifdef CONFIG_PPC64
+		/* Align to 16 MB == size of ppc64 large page */
+		RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+#endif
+	}
 }
 
 #ifdef CONFIG_PPC_PSERIES
@@ -1026,6 +1097,29 @@ static void __init prom_init_mem(void)
 			RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
 	}
 
+	/*
+	 * If prom_memory_limit is set we reduce the upper limits *except* for
+	 * alloc_top_high. This must be the real top of RAM so we can put
+	 * TCE's up there.
+	 */
+
+	RELOC(alloc_top_high) = RELOC(ram_top);
+
+	if (RELOC(prom_memory_limit)) {
+		if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
+			prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
+				RELOC(prom_memory_limit));
+			RELOC(prom_memory_limit) = 0;
+		} else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
+			prom_printf("Ignoring mem=%x >= ram_top.\n",
+				RELOC(prom_memory_limit));
+			RELOC(prom_memory_limit) = 0;
+		} else {
+			RELOC(ram_top) = RELOC(prom_memory_limit);
+			RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
+		}
+	}
+
 	/*
 	 * Setup our top alloc point, that is top of RMO or top of
 	 * segment 0 when running non-LPAR.
@@ -1041,6 +1135,7 @@ static void __init prom_init_mem(void)
 	RELOC(alloc_top_high) = RELOC(ram_top);
 
 	prom_printf("memory layout at init:\n");
+	prom_printf("  memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
 	prom_printf("  alloc_bottom : %x\n", RELOC(alloc_bottom));
 	prom_printf("  alloc_top    : %x\n", RELOC(alloc_top));
 	prom_printf("  alloc_top_hi : %x\n", RELOC(alloc_top_high));
@@ -2395,6 +2490,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	/*
 	 * Fill in some infos for use by the kernel later on
 	 */
+	if (RELOC(prom_memory_limit))
+		prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
+			     &RELOC(prom_memory_limit),
+			     sizeof(prom_memory_limit));
 #ifdef CONFIG_PPC64
 	if (RELOC(prom_iommu_off))
 		prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
-- 
cgit v1.2.3


From 02a606c2c47a2e4714225d0c3513ca03679f01d2 Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Thu, 30 Jul 2009 06:02:18 +0000
Subject: powerpc: Missing tests for NULL after ioremap()

Missing tests after ioremap()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/feature.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 095de3227d8..fbc9bbd74db 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2589,9 +2589,16 @@ static void __init probe_uninorth(void)
 	if (address == 0)
 		return;
 	uninorth_base = ioremap(address, 0x40000);
+	if (uninorth_base == NULL)
+		return;
 	uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
-	if (uninorth_maj == 3 || uninorth_maj == 4)
+	if (uninorth_maj == 3 || uninorth_maj == 4) {
 		u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+		if (u3_ht_base == NULL) {
+			iounmap(uninorth_base);
+			return;
+		}
+	}
 
 	printk(KERN_INFO "Found %s memory controller & host bridge"
 	       " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
-- 
cgit v1.2.3


From 9413c8836a16e9d034928a7f9d3ad81bebd71ce9 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Wed, 29 Jul 2009 02:06:42 +0000
Subject: powerpc/cell: Move CBE_IOPTE_* to <asm/cell-regs.h>

As <asm/iommu.h> doesn't contain any other hardware specific definitions
but only interfaces.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/cell-regs.h    | 11 +++++++++++
 arch/powerpc/include/asm/iommu.h        | 10 ----------
 arch/powerpc/platforms/ps3/mm.c         |  2 +-
 arch/powerpc/platforms/ps3/system-bus.c |  2 +-
 4 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
index fd6fd00434e..fdf64fd2595 100644
--- a/arch/powerpc/include/asm/cell-regs.h
+++ b/arch/powerpc/include/asm/cell-regs.h
@@ -303,6 +303,17 @@ struct cbe_mic_tm_regs {
 extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
 extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
 
+
+/* Cell page table entries */
+#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
+#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
+#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
+#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
+#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
+#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
+#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
+#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
+
 /* some utility functions to deal with SMT */
 extern u32 cbe_get_hw_thread_id(int cpu);
 extern u32 cbe_cpu_to_node(int cpu);
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7ead7c16fb7..7464c0daddd 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -35,16 +35,6 @@
 #define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
 #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
 
-/* Cell page table entries */
-#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
-#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
-#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
-#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
-#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
-#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
-#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
-#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
-
 /* Boot time flags */
 extern int iommu_is_off;
 extern int iommu_force_on;
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 846eb8b57fd..189a25b8073 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -23,8 +23,8 @@
 #include <linux/memory_hotplug.h>
 #include <linux/lmb.h>
 
+#include <asm/cell-regs.h>
 #include <asm/firmware.h>
-#include <asm/iommu.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 3f763c5284a..676f989ed4e 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -27,7 +27,7 @@
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 #include <asm/firmware.h>
-#include <asm/iommu.h>
+#include <asm/cell-regs.h>
 
 #include "platform.h"
 
-- 
cgit v1.2.3


From 14ea58ad797e4e9b7be755aca0fd3925d0713ede Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 1 Aug 2009 22:48:27 +0000
Subject: powerpc: Use DIV_ROUND_CLOSEST in time init code

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/time.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index eae4511ceea..edb1edb3646 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -479,7 +479,8 @@ static int __init iSeries_tb_recal(void)
 		unsigned long tb_ticks = tb - iSeries_recal_tb;
 		unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
 		unsigned long new_tb_ticks_per_sec   = (tb_ticks * USEC_PER_SEC)/titan_usec;
-		unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
+		unsigned long new_tb_ticks_per_jiffy =
+			DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ);
 		long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
 		char sign = '+';		
 		/* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
-- 
cgit v1.2.3


From 6826a57d1abc8ac9f59b24f1a008554c6560a995 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 5 Aug 2009 12:24:45 +0000
Subject: powerpc: Switch to asm-generic/hardirq.h

hardirq.h on powerpc defines a __last_jiffy_stamp field, but it's not
actually used anywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/hardirq.h | 30 +-----------------------------
 1 file changed, 1 insertion(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
index 288e14d53b7..fb3c05a0cbb 100644
--- a/arch/powerpc/include/asm/hardirq.h
+++ b/arch/powerpc/include/asm/hardirq.h
@@ -1,29 +1 @@
-#ifndef _ASM_POWERPC_HARDIRQ_H
-#define _ASM_POWERPC_HARDIRQ_H
-#ifdef __KERNEL__
-
-#include <asm/irq.h>
-#include <asm/bug.h>
-
-/* The __last_jiffy_stamp field is needed to ensure that no decrementer
- * interrupt is lost on SMP machines. Since on most CPUs it is in the same
- * cache line as local_irq_count, it is cheap to access and is also used on UP
- * for uniformity.
- */
-typedef struct {
-	unsigned int __softirq_pending;	/* set_bit is used on this */
-	unsigned int __last_jiffy_stamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
-
-static inline void ack_bad_irq(int irq)
-{
-	printk(KERN_CRIT "illegal vector %d received!\n", irq);
-	BUG();
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HARDIRQ_H */
+#include <asm-generic/hardirq.h>
-- 
cgit v1.2.3


From a15098c90df1ac2b1bfe1d33dd1c47063213aa9a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Sun, 9 Aug 2009 19:02:51 +0000
Subject: powerpc: Enable GCOV

Make it possible to enable GCOV code coverage measurement on powerpc.

Lightly tested on 64-bit, seems to work as expected.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/Makefile        | 7 +++++++
 arch/powerpc/kernel/vdso32/Makefile | 1 +
 arch/powerpc/kernel/vdso64/Makefile | 2 ++
 arch/powerpc/xmon/Makefile          | 2 ++
 4 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 035946f9d5f..720e8c3b8e9 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -115,6 +115,13 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
 obj-y				+= ppc_save_regs.o
 endif
 
+# Disable GCOV in odd or sensitive code
+GCOV_PROFILE_prom_init.o := n
+GCOV_PROFILE_ftrace.o := n
+GCOV_PROFILE_machine_kexec_64.o := n
+GCOV_PROFILE_machine_kexec_32.o := n
+GCOV_PROFILE_kprobes.o := n
+
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-$(CONFIG_ALTIVEC)		+= vector.o
 extra-$(CONFIG_PPC64)		+= entry_64.o
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index c3d57bd01a8..b54b8168813 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -12,6 +12,7 @@ endif
 targets := $(obj-vdso32) vdso32.so vdso32.so.dbg
 obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
 
+GCOV_PROFILE := n
 
 EXTRA_CFLAGS := -shared -fno-common -fno-builtin
 EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index fa7f1b8f3e5..dd0c8e93677 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -7,6 +7,8 @@ obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o
 targets := $(obj-vdso64) vdso64.so vdso64.so.dbg
 obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64))
 
+GCOV_PROFILE := n
+
 EXTRA_CFLAGS := -shared -fno-common -fno-builtin
 EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
 		$(call ld-option, -Wl$(comma)--hash-style=sysv)
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 85ab97ab840..faa81b6a661 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -2,6 +2,8 @@
 
 subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
 
+GCOV_PROFILE := n
+
 ifdef CONFIG_PPC64
 EXTRA_CFLAGS += -mno-minimal-toc
 endif
-- 
cgit v1.2.3


From 903444e4297264ec0959e886695911659edb425c Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Sun, 9 Aug 2009 19:06:24 +0000
Subject: powerpc/vmlinux.lds: Move _edata down

Currently _edata does not include several data sections, this causes
the kernel's report of memory usage at boot to not match reality, and
also prevents kmemleak from working - because it scan between _sdata
and _edata for pointers to allocated memory.

This mirrors a similar change made recently to the x86 linker script.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 8ef8a14abc9..3bb09975e34 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -245,10 +245,6 @@ SECTIONS
 	}
 #endif
 
-	. = ALIGN(PAGE_SIZE);
-	_edata  =  .;
-	PROVIDE32 (edata = .);
-
 	/* The initial task and kernel stack */
 #ifdef CONFIG_PPC32
 	. = ALIGN(8192);
@@ -282,6 +278,10 @@ SECTIONS
 		__nosave_end = .;
 	}
 
+	. = ALIGN(PAGE_SIZE);
+	_edata  =  .;
+	PROVIDE32 (edata = .);
+
 /*
  * And finally the bss
  */
-- 
cgit v1.2.3


From 3c15a68880023722fc794018768df556f438ae98 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 10 Aug 2009 17:14:55 +0000
Subject: powerpc: use consistent types in mktree

gcc v4.4 currently produces this build warning:

arch/powerpc/boot/mktree.c: In function 'main':
arch/powerpc/boot/mktree.c:104: warning: dereferencing type-punned pointer will break strict-aliasing rules

tmpbuf is only used as an array of unsigned ints, so declare it that way.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/mktree.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index c2baae0a3d8..e2ae24340fc 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -36,7 +36,7 @@ typedef struct boot_block {
 } boot_block_t;
 
 #define IMGBLK	512
-char	tmpbuf[IMGBLK];
+unsigned int	tmpbuf[IMGBLK / sizeof(unsigned int)];
 
 int main(int argc, char *argv[])
 {
@@ -95,13 +95,13 @@ int main(int argc, char *argv[])
 
 	/* Assume zImage is an ELF file, and skip the 64K header.
 	*/
-	if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
+	if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
 		fprintf(stderr, "%s is too small to be an ELF image\n",
 				argv[1]);
 		exit(4);
 	}
 
-	if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
+	if (tmpbuf[0] != htonl(0x7f454c46)) {
 		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
 		exit(4);
 	}
@@ -121,11 +121,11 @@ int main(int argc, char *argv[])
 	}
 
 	while (nblks-- > 0) {
-		if (read(in_fd, tmpbuf, IMGBLK) < 0) {
+		if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) {
 			perror("zImage read");
 			exit(5);
 		}
-		cp = (unsigned int *)tmpbuf;
+		cp = tmpbuf;
 		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
 			cksum += *cp++;
 		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
-- 
cgit v1.2.3


From 4138b74066cc33ede31bfd6cb2b7a5e685cfd327 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 19 Aug 2009 12:08:33 +0000
Subject: sh: Add EcoVec (SH7724) board support

This adds preliminary support for the EcoVec board.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Makefile                      |    1 +
 arch/sh/boards/Kconfig                |    7 +
 arch/sh/boards/mach-ecovec24/Makefile |    9 +
 arch/sh/boards/mach-ecovec24/setup.c  |  129 +++
 arch/sh/configs/ecovec24_defconfig    | 1550 +++++++++++++++++++++++++++++++++
 5 files changed, 1696 insertions(+)
 create mode 100644 arch/sh/boards/mach-ecovec24/Makefile
 create mode 100644 arch/sh/boards/mach-ecovec24/setup.c
 create mode 100644 arch/sh/configs/ecovec24_defconfig

(limited to 'arch')

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index e26421bf997..fc51a918b31 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -137,6 +137,7 @@ machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
 machdir-$(CONFIG_SH_KFR2R09)			+= mach-kfr2r09
+machdir-$(CONFIG_SH_ECOVEC)			+= mach-ecovec24
 machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
 machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
 machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index db04c85971a..b66f6d16523 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -200,6 +200,13 @@ config SH_KFR2R09
 	help
 	  "Kit For R2R for 2009" support.
 
+config SH_ECOVEC
+	bool "EcoVec"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
+
 config SH_SH7763RDP
 	bool "SH7763RDP"
 	depends on CPU_SUBTYPE_SH7763
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
new file mode 100644
index 00000000000..51f85215165
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the R0P7724LC0011/21RL (EcoVec)
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 00000000000..b634a72da1e
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <cpu/sh7724.h>
+
+/*
+ * Area   Address                    Interface     size  BusWidth
+ * 0      0x0000_0000 ~ 0x03FF_FFFF  FROM          64MB  16bit
+ * 1      0x0400_0000 ~ 0x07FF_FFFF  Internal I/O  64MB  16/32bit
+ * 2      0x0800_0000 ~ 0x0BFF_FFFF  DRAM 2        64MB  32bit
+ * 3      0x0C00_0000 ~ 0x0FFF_FFFF  DRAM 3        64MB  32bit
+ * 4      0x1000_0000 ~ 0x13FF_FFFF  DRAM 4        64MB  32bit
+ * 5      0x1400_0000 ~ 0x17FF_FFFF  DRAM 5        64MB  32bit
+ * 6      0x1800_0000 ~ 0x1BFF_FFFF  MFI           64MB  16bit
+ */
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+	.nr_bits = 4,
+	.bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = 0xA405012C, /* PTG */
+		.end    = 0xA405012E - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (256 * 1024),
+		.mask_flags = MTD_CAP_ROM,
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+static struct platform_device *ecovec_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+};
+
+static int __init devices_setup(void)
+{
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_SCK, NULL);
+
+	/* enable debug LED */
+	gpio_request(GPIO_PTG0, NULL);
+	gpio_request(GPIO_PTG1, NULL);
+	gpio_request(GPIO_PTG2, NULL);
+	gpio_request(GPIO_PTG3, NULL);
+	gpio_direction_output(GPIO_PTT0, 0);
+	gpio_direction_output(GPIO_PTT1, 0);
+	gpio_direction_output(GPIO_PTT2, 0);
+	gpio_direction_output(GPIO_PTT3, 0);
+
+	return platform_add_devices(ecovec_devices,
+				    ARRAY_SIZE(ecovec_devices));
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+	.mv_name	= "R0P7724 (EcoVec)",
+};
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
new file mode 100644
index 00000000000..6d983f6864c
--- /dev/null
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -0,0 +1,1550 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 11:32:44 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+CONFIG_SH_ECOVEC=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_TMU=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty0, console=ttySC3,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+CONFIG_SMC91X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
-- 
cgit v1.2.3


From e638fab91e5d1c4db3a80957546c32ed4bd75086 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 20 Aug 2009 10:14:29 +0900
Subject: sh: Add mach-types entry for EcoVec board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/tools/mach-types | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 09eef360dde..b57362879e0 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -57,3 +57,4 @@ URQUELL			SH_URQUELL
 ESPT			SH_ESPT
 POLARIS			SH_POLARIS
 KFR2R09			SH_KFR2R09
+ECOVEC			SH_ECOVEC
-- 
cgit v1.2.3


From 5a1c4cb5bc228662bfb116f1e07ad658915a5742 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 19 Aug 2009 14:39:15 +0000
Subject: sh: add r8a66597 usb0 gadget to the kfr2r09 board

Add USB gadget support for port YC301 on the KFR2R09 board.

The r8a66597-udc driver is hooked up as a platform device,
clocks are enabled via I2C and some registers are configured
to enable the USB in gadget mode. The hardware driving the
USB port is the on-chip USB0 block in the sh7724 processor
configured as USB gadget controller.

This board is using external hardware to detect USB hotplug
events and allows the processor to dynamically start and stop
clocks. This well thought out hardware feature is unused at
this point and plug and play is unfortunately unsupported.
To properly support all hardware features the USB gadget
stack may need some adjustment.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 103 ++++++++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index bdb10c29ef1..1cbd6a3655c 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -16,6 +16,8 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
@@ -175,6 +177,35 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
 	},
 };
 
+static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource kfr2r09_usb0_gadget_resources[] = {
+	[0] = {
+		.start	= 0x04d80000,
+		.end	= 0x04d80123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device kfr2r09_usb0_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data	= &kfr2r09_usb0_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
+	.resource	= kfr2r09_usb0_gadget_resources,
+};
+
 static struct platform_device *kfr2r09_devices[] __initdata = {
 	&kfr2r09_nor_flash_device,
 	&kfr2r09_nand_flash_device,
@@ -186,6 +217,74 @@ static struct platform_device *kfr2r09_devices[] __initdata = {
 #define BSC_CS0WCR 0xfec10024
 #define BSC_CS4BCR 0xfec10010
 #define BSC_CS4WCR 0xfec10030
+#define PORT_MSELCRB 0xa4050182
+
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 1);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int kfr2r09_usb0_gadget_setup(void)
+{
+	int plugged_in;
+
+	gpio_request(GPIO_PTN4, NULL); /* USB_DET */
+	gpio_direction_input(GPIO_PTN4);
+	plugged_in = gpio_get_value(GPIO_PTN4);
+	if (!plugged_in)
+		return -ENODEV; /* no cable plugged in */
+
+	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
+		return -ENODEV; /* unable to configure using i2c */
+
+	ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
+	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
+	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
+	msleep(20); /* wait 20ms to let the clock settle */
+	clk_enable(clk_get(NULL, "usb0"));
+	ctrl_outw(0x0600, 0xa40501d4);
+
+	return 0;
+}
 
 static int __init kfr2r09_devices_setup(void)
 {
@@ -245,6 +344,10 @@ static int __init kfr2r09_devices_setup(void)
 	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
 	gpio_direction_output(GPIO_PTU0, 1);
 
+	/* setup USB function */
+	if (kfr2r09_usb0_gadget_setup() == 0)
+		platform_device_register(&kfr2r09_usb0_gadget_device);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }
-- 
cgit v1.2.3


From f8f8c0797d73624d6e81dbb9c9e8f85005500ebc Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 19 Aug 2009 09:52:02 +0000
Subject: sh: add r8a66597 usb1 gadget to the se7724 board

Add USB gadget support for port CN26 on the Solution Engine 7724
board. The r8a66597-udc driver is hooked up as a platform device
and some registers are configured to enable the USB in gadget mode.
The hardware driving the USB port is the on-chip USB1 block in
the sh7724 processor configured as USB gadget controller.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index c04e134474d..e6bd09f2e14 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -341,6 +341,35 @@ static struct platform_device sh7724_usb0_host_device = {
 	.resource	= sh7724_usb0_host_resources,
 };
 
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 1, /* USB1 */
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb1_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb1_gadget_resources),
+	.resource	= sh7724_usb1_gadget_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -351,6 +380,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&keysc_device,
 	&sh_eth_device,
 	&sh7724_usb0_host_device,
+	&sh7724_usb1_gadget_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -459,6 +489,9 @@ static int __init devices_setup(void)
 	/* enable USB0 port */
 	ctrl_outw(0x0600, 0xa40501d4);
 
+	/* enable USB1 port */
+	ctrl_outw(0x0600, 0xa4050192);
+
 	/* enable IRQ 0,1,2 */
 	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
 	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
-- 
cgit v1.2.3


From 307646c958f0f3c3624368eaa72dce8567b25f93 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 20 Aug 2009 12:07:46 +0900
Subject: sh: Fix up the CONFIG_FTRACE_SYSCALLS=n build.

-tip can't be bothered keeping interfaces stable long enough for anyone
to use them without having their builds broken without notification, so
just ifdef around the problematic symbols until the new interfaces become
available upstream.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/ptrace_32.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index c198eceaee9..f4f58e438a2 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -461,8 +461,10 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1L;
 
+#ifdef CONFIG_FTRACE_SYSCALLS
 	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
 		ftrace_syscall_enter(regs);
+#endif
 
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[3],
@@ -480,8 +482,10 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
 				   regs->regs[0]);
 
+#ifdef CONFIG_FTRACE_SYSCALLS
 	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
 		ftrace_syscall_exit(regs);
+#endif
 
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
-- 
cgit v1.2.3


From 6503fe4a6508673c15a509ec4ac3ca5979ae9593 Mon Sep 17 00:00:00 2001
From: Michael Trimarchi <trimarchimichael@yahoo.it>
Date: Thu, 20 Aug 2009 13:27:44 +0900
Subject: sh: Better description of SH-4 PTEA register update.

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/pgtable_32.h | 8 ++++++++
 arch/sh/mm/tlb-sh4.c             | 9 ++++++---
 2 files changed, 14 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 0db19db913c..4c4429cda56 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -87,6 +87,14 @@
 #define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
 #define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
 
+#ifndef CONFIG_X2TLB
+/* copy the ptea attributes */
+static inline unsigned long copy_ptea_attributes(unsigned long x)
+{
+	return	((x >> 28) & 0xe) | (x & 0x1);
+}
+#endif
+
 /* Mask which drops unused bits from the PTEL value */
 #if defined(CONFIG_CPU_SH3)
 #define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index f0c7b7397fa..fd0d11f1a81 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -61,9 +61,12 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	 */
 	ctrl_outl(pte.pte_high, MMU_PTEA);
 #else
-	if (cpu_data->flags & CPU_HAS_PTEA)
-		/* TODO: make this look less hacky */
-		ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
+	if (cpu_data->flags & CPU_HAS_PTEA) {
+		/* The last 3 bits and the first one of pteval contains
+		 * the PTEA timing control and space attribute bits
+		 */
+		ctrl_outl(copy_ptea_attributes(pteval), MMU_PTEA);
+	}
 #endif
 
 	/* Set PTEL register */
-- 
cgit v1.2.3


From 485f0720c3e0f57deac403acfbf078a89baeb6ba Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 20 Aug 2009 14:02:20 +0900
Subject: sh: DSP save/restore ordering and a0 sign extension fixups.

As an excellent indicator of how much testing the DSP code gets, a couple
of rather glaring bugs in the DSP save/restore paths were found:

- In the DSP restore case a0 needs to be popped off before a0g,
  or the value of a0g is clobbered by the MSB of a0 in the case
  of sign extension.

- Beyond that, the save and restore orders were out of sync,
  so this fixes that up as well. At the same time, we switch over
  to using movs.l for both the save and restore of the general DSP
  registers as opposed to using sts.l (which was initially put in
  place to work around a bug in ancient binutils versions which
  the kernel no longer supports).

Reported-by: Chee Soon Yip <yip.cheesoon@renesas.com>
Cc: Chu Lih Kwek <kwek.chulih@renesas.com>,
Cc: General Lai <general.lai@renesas.com>,
Cc: Robert Cozens <Robert.Cozens@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/system_32.h | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 6c68a51f1cc..81e0d668eef 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -14,12 +14,12 @@ do {									\
 			(u32 *)&tsk->thread.dsp_status;			\
 	__asm__ __volatile__ (						\
 		".balign 4\n\t"						\
+		"movs.l	@r2+, a0\n\t"					\
 		"movs.l	@r2+, a1\n\t"					\
 		"movs.l	@r2+, a0g\n\t"					\
 		"movs.l	@r2+, a1g\n\t"					\
 		"movs.l	@r2+, m0\n\t"					\
 		"movs.l	@r2+, m1\n\t"					\
-		"movs.l	@r2+, a0\n\t"					\
 		"movs.l	@r2+, x0\n\t"					\
 		"movs.l	@r2+, x1\n\t"					\
 		"movs.l	@r2+, y0\n\t"					\
@@ -39,20 +39,20 @@ do {									\
 									\
 	__asm__ __volatile__ (						\
 		".balign 4\n\t"						\
-		"stc.l	mod, @-r2\n\t"				\
+		"stc.l	mod, @-r2\n\t"					\
 		"stc.l	re, @-r2\n\t"					\
 		"stc.l	rs, @-r2\n\t"					\
-		"sts.l	dsr, @-r2\n\t"				\
-		"sts.l	y1, @-r2\n\t"					\
-		"sts.l	y0, @-r2\n\t"					\
-		"sts.l	x1, @-r2\n\t"					\
-		"sts.l	x0, @-r2\n\t"					\
-		"sts.l	a0, @-r2\n\t"					\
-		".word	0xf653		! movs.l	a1, @-r2\n\t"	\
-		".word	0xf6f3		! movs.l	a0g, @-r2\n\t"	\
-		".word	0xf6d3		! movs.l	a1g, @-r2\n\t"	\
-		".word	0xf6c3		! movs.l        m0, @-r2\n\t"	\
-		".word	0xf6e3		! movs.l        m1, @-r2\n\t"	\
+		"sts.l	dsr, @-r2\n\t"					\
+		"movs.l	y1, @-r2\n\t"					\
+		"movs.l	y0, @-r2\n\t"					\
+		"movs.l	x1, @-r2\n\t"					\
+		"movs.l	x0, @-r2\n\t"					\
+		"movs.l	m1, @-r2\n\t"					\
+		"movs.l	m0, @-r2\n\t"					\
+		"movs.l	a1g, @-r2\n\t"					\
+		"movs.l	a0g, @-r2\n\t"					\
+		"movs.l	a1, @-r2\n\t"					\
+		"movs.l	a0, @-r2\n\t"					\
 		: : "r" (__ts2));					\
 } while (0)
 
-- 
cgit v1.2.3


From e89561cf49bb7f83b48067924470d313e2d570a9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 20 Aug 2009 15:06:47 +0900
Subject: sh: enable rtc-ds1302 in snapgear_defconfig.

This is the only board that presently supports this rtc, so make sure it
is enabled by default to get some build coverage.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/snapgear_defconfig | 77 +++++++++++++++++++++++++++++++++++---
 1 file changed, 72 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index ca3c88a8802..2be2d75adbb 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:11:58 2009
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 15:03:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -86,10 +95,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_STRIP_ASM_SYMS is not set
@@ -106,6 +117,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -534,7 +549,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -686,6 +705,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -732,7 +756,44 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+CONFIG_RTC_DRV_DS1302=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
@@ -754,6 +815,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -856,8 +918,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -865,6 +930,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -893,5 +959,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
-- 
cgit v1.2.3


From c139a595878b0e8156476668e3d5c27b6aca7624 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 20 Aug 2009 15:24:41 +0900
Subject: sh: Fix up cache-sh4 build on SMP.

mapping is unused on the SMP build, trigger a build error. Move it under
the ifdef.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 05cb04bc394..6c2db140108 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -106,9 +106,9 @@ static inline void flush_cache_4096(unsigned long start,
  */
 static void sh4_flush_dcache_page(struct page *page)
 {
+#ifndef CONFIG_SMP
 	struct address_space *mapping = page_mapping(page);
 
-#ifndef CONFIG_SMP
 	if (mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
 	else
-- 
cgit v1.2.3


From 711e522d70f760969de7bcc97907b467993614dc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 20 Aug 2009 17:24:40 +0900
Subject: sh: Use local TLB flush for get_mmu_context() ASID exhaustion.

When get_mmu_context() runs out of new ASIDs it flushes the TLB and
wraps around. Despite the fact the ASIDs are tracked per-CPU, a global
TLB flush was being used. Switch this over to a local one, as matches
the intent.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/mmu_context.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
index 67d8946db19..41080b173a7 100644
--- a/arch/sh/include/asm/mmu_context.h
+++ b/arch/sh/include/asm/mmu_context.h
@@ -69,7 +69,7 @@ static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
 		 * We exhaust ASID of this version.
 		 * Flush all TLB and start new cycle.
 		 */
-		flush_tlb_all();
+		local_flush_tlb_all();
 
 #ifdef CONFIG_SUPERH64
 		/*
-- 
cgit v1.2.3


From fc0ce23506d943b9eaa731a051769d0e0605eb03 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Thu, 20 Aug 2009 16:14:15 +0100
Subject: x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile

The absence of vmlinux.lds here keeps .vmlinux.lds.cmd from being
included, which in turn leads to it and all its dependents always
getting rebuilt independent of whether they are already up-to-date.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4A8D84670200007800010D31@vpn.id2.novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/compressed/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index e2ff504b4dd..f8ed0658404 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
-- 
cgit v1.2.3


From 045a4b7ee73764131c39733de7d06e8c553f805a Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 20 Aug 2009 13:57:36 +0000
Subject: sh: i2c compile fix for kfr2r09

Fix the kfr2r09 board code so it compiles if CONFIG_I2C=n.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-kfr2r09/setup.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 1cbd6a3655c..1e2cb1976df 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -219,6 +219,7 @@ static struct platform_device *kfr2r09_devices[] __initdata = {
 #define BSC_CS4WCR 0xfec10030
 #define PORT_MSELCRB 0xa4050182
 
+#ifdef CONFIG_I2C
 static int kfr2r09_usb0_gadget_i2c_setup(void)
 {
 	struct i2c_adapter *a;
@@ -261,6 +262,12 @@ static int kfr2r09_usb0_gadget_i2c_setup(void)
 
 	return 0;
 }
+#else
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	return -ENODEV;
+}
+#endif
 
 static int kfr2r09_usb0_gadget_setup(void)
 {
-- 
cgit v1.2.3


From 7c328e476bc56c86e77ffff5c947f4b8ec47e36b Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 20 Aug 2009 13:58:38 +0000
Subject: sh: invalidate icache and tlbs during boot on kfr2r09

Add instruction cache and TLB invalidation code for the
the kfr2r09 romimage target.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
index 25801d495c5..a19ac31c8cd 100644
--- a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
+++ b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
@@ -16,6 +16,12 @@ LIST "--------------------------------"
 LIST "disable watchdog"
 EW 0xa4520004, 0xa507
 
+LIST "invalidate instruction cache"
+ED 0xff00001c, 0x00000800
+
+LIST "invalidate TLBs"
+ED 0xff000010, 0x00000004
+
 LIST "select mode for cs5 + cs6"
 ED 0xff800020, 0xa5a50001
 ED 0xfec10000, 0x0000001b
-- 
cgit v1.2.3


From 673b74be85bff420cccdc529d8247dbf486e175d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 20 Aug 2009 13:59:26 +0000
Subject: sh: jump to p1 during boot on kfr2r09

Add a P1 jump to the the kfr2r09 romimage code. With this
patch applied the initial zImage assembly code will run
with instruction cache enabled.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-kfr2r09/mach/romimage.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index f5aa8e16770..39ee7944356 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -73,3 +73,16 @@
 .endm
 
 #include "partner-jet-setup.txt"
+
+	/* execute icbi after enabling cache */
+	mov.l	1f, r0
+	icbi	@r0
+
+	/* jump to cached area */
+	mova	2f, r0
+	jmp	@r0
+	 nop
+
+	.align 2
+1:	.long 0xa8000000
+2:
-- 
cgit v1.2.3


From e498dab4bbf263e1cdb8327b0f019299c44e13e2 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 20 Aug 2009 14:01:24 +0000
Subject: sh: add kfr2r09 romimage defconfig

Add romImage defconfig for the kfr2r09 board. This defconfig
should be used to build the kernel based boot loader.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/kfr2r09-romimage_defconfig | 774 +++++++++++++++++++++++++++++
 1 file changed, 774 insertions(+)
 create mode 100644 arch/sh/configs/kfr2r09-romimage_defconfig

(limited to 'arch')

diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
new file mode 100644
index 00000000000..c0f9263e138
--- /dev/null
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -0,0 +1,774 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 15:09:16 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+CONFIG_SH_KFR2R09=y
+# CONFIG_SH_ECOVEC is not set
+
+#
+# Timer and clock configuration
+#
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 quiet"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=y
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
-- 
cgit v1.2.3


From a81bec7653a098349af247926bb19c2889dde803 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Thu, 20 Aug 2009 14:02:24 +0000
Subject: sh: update kfr2r09 defconfig

Update the kfr2r09 defconfig with support for LCDC and USB gadget.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/kfr2r09_defconfig | 212 +++++++++++++++++++++++++++++++++++---
 1 file changed, 197 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index 90e575c34d5..cef61319d2f 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 23 17:45:09 2009
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 21:58:52 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -38,6 +38,7 @@ CONFIG_CONSTRUCTORS=y
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
@@ -132,7 +133,12 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -255,6 +261,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # CONFIG_SH_7724_SOLUTION_ENGINE is not set
 CONFIG_SH_KFR2R09=y
+# CONFIG_SH_ECOVEC is not set
 
 #
 # Timer and clock configuration
@@ -301,8 +308,8 @@ CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_SECCOMP is not set
 # CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
 CONFIG_GUSA=y
 # CONFIG_SPARSE_IRQ is not set
 
@@ -313,7 +320,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC1,115200"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
 
 #
 # Bus options
@@ -427,6 +434,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -639,6 +647,7 @@ CONFIG_I2C_SH_MOBILE=y
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -715,7 +724,35 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -727,15 +764,157 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+CONFIG_LOGO_SUPERH_VGA16=y
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=y
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
@@ -763,8 +942,10 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -829,7 +1010,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
@@ -844,6 +1025,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -862,10 +1044,10 @@ CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_CRC7=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
-- 
cgit v1.2.3


From f9bd71f255b4349c4f9f596863161fd5182f67fa Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 21 Aug 2009 16:20:57 +0900
Subject: sh: Kill off unused cpu/cacheflush.h.

All CPU-specific overloads are done at runtime now, so this common header
can go away and simply be folded back in to asm/ version.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h            | 32 +++++++++++++++++++++-
 arch/sh/include/cpu-common/cpu/cacheflush.h | 42 -----------------------------
 2 files changed, 31 insertions(+), 43 deletions(-)
 delete mode 100644 arch/sh/include/cpu-common/cpu/cacheflush.h

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 25b7f46494d..32299b7c2b4 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -4,7 +4,37 @@
 #ifdef __KERNEL__
 
 #include <linux/mm.h>
-#include <cpu/cacheflush.h>
+
+/*
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *  - flush_cache_sigtramp(vaddr) flushes the signal trampoline
+ */
+extern void (*flush_cache_all)(void);
+extern void (*flush_cache_mm)(struct mm_struct *mm);
+extern void (*flush_cache_dup_mm)(struct mm_struct *mm);
+extern void (*flush_cache_page)(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn);
+extern void (*flush_cache_range)(struct vm_area_struct *vma,
+				 unsigned long start, unsigned long end);
+extern void (*flush_dcache_page)(struct page *page);
+extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*flush_icache_page)(struct vm_area_struct *vma,
+				 struct page *page);
+extern void (*flush_cache_sigtramp)(unsigned long address);
+
+extern void (*__flush_wback_region)(void *start, int size);
+extern void (*__flush_purge_region)(void *start, int size);
+extern void (*__flush_invalidate_region)(void *start, int size);
 
 #define ARCH_HAS_FLUSH_ANON_PAGE
 extern void __flush_anon_page(struct page *page, unsigned long);
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
deleted file mode 100644
index 8189dbd68f8..00000000000
--- a/arch/sh/include/cpu-common/cpu/cacheflush.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH_CACHEFLUSH_H
-#define __ASM_CPU_SH_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- *  - flush_cache_all() flushes entire cache
- *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
- *  - flush_cache_dup mm(mm) handles cache flushing when forking
- *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- *  - flush_cache_range(vma, start, end) flushes a range of pages
- *
- *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
- *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *  - flush_cache_sigtramp(vaddr) flushes the signal trampoline
- */
-extern void (*flush_cache_all)(void);
-extern void (*flush_cache_mm)(struct mm_struct *mm);
-extern void (*flush_cache_dup_mm)(struct mm_struct *mm);
-extern void (*flush_cache_page)(struct vm_area_struct *vma,
-				unsigned long addr, unsigned long pfn);
-extern void (*flush_cache_range)(struct vm_area_struct *vma,
-				 unsigned long start, unsigned long end);
-extern void (*flush_dcache_page)(struct page *page);
-extern void (*flush_icache_range)(unsigned long start, unsigned long end);
-extern void (*flush_icache_page)(struct vm_area_struct *vma,
-				 struct page *page);
-extern void (*flush_cache_sigtramp)(unsigned long address);
-
-extern void (*__flush_wback_region)(void *start, int size);
-extern void (*__flush_purge_region)(void *start, int size);
-extern void (*__flush_invalidate_region)(void *start, int size);
-
-#endif /* __ASM_CPU_SH_CACHEFLUSH_H */
-- 
cgit v1.2.3


From f26b2a562b46ab186c8383993ab1332673ac4a47 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 21 Aug 2009 17:23:14 +0900
Subject: sh: Make cache flushers SMP-aware.

This does a bit of rework for making the cache flushers SMP-aware. The
function pointer-based flushers are renamed to local variants with the
exported interface being commonly implemented and wrapping as necessary.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h |  41 ++++++++----
 arch/sh/mm/cache-sh2a.c          |  10 +--
 arch/sh/mm/cache-sh4.c           |  54 ++++++++++-----
 arch/sh/mm/cache-sh5.c           |  64 +++++++++++-------
 arch/sh/mm/cache-sh7705.c        |  67 +++++++------------
 arch/sh/mm/cache.c               | 137 ++++++++++++++++++++++-----------------
 6 files changed, 213 insertions(+), 160 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 32299b7c2b4..11e41663058 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -19,23 +19,40 @@
  *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
  *  - flush_cache_sigtramp(vaddr) flushes the signal trampoline
  */
-extern void (*flush_cache_all)(void);
-extern void (*flush_cache_mm)(struct mm_struct *mm);
-extern void (*flush_cache_dup_mm)(struct mm_struct *mm);
-extern void (*flush_cache_page)(struct vm_area_struct *vma,
-				unsigned long addr, unsigned long pfn);
-extern void (*flush_cache_range)(struct vm_area_struct *vma,
-				 unsigned long start, unsigned long end);
-extern void (*flush_dcache_page)(struct page *page);
-extern void (*flush_icache_range)(unsigned long start, unsigned long end);
-extern void (*flush_icache_page)(struct vm_area_struct *vma,
-				 struct page *page);
-extern void (*flush_cache_sigtramp)(unsigned long address);
+extern void (*local_flush_cache_all)(void *args);
+extern void (*local_flush_cache_mm)(void *args);
+extern void (*local_flush_cache_dup_mm)(void *args);
+extern void (*local_flush_cache_page)(void *args);
+extern void (*local_flush_cache_range)(void *args);
+extern void (*local_flush_dcache_page)(void *args);
+extern void (*local_flush_icache_range)(void *args);
+extern void (*local_flush_icache_page)(void *args);
+extern void (*local_flush_cache_sigtramp)(void *args);
+
+static inline void cache_noop(void *args) { }
 
 extern void (*__flush_wback_region)(void *start, int size);
 extern void (*__flush_purge_region)(void *start, int size);
 extern void (*__flush_invalidate_region)(void *start, int size);
 
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_dup_mm(struct mm_struct *mm);
+extern void flush_cache_page(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn);
+extern void flush_cache_range(struct vm_area_struct *vma,
+				 unsigned long start, unsigned long end);
+extern void flush_dcache_page(struct page *page);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma,
+				 struct page *page);
+extern void flush_cache_sigtramp(unsigned long address);
+
+struct flusher_data {
+	struct vm_area_struct *vma;
+	unsigned long addr1, addr2;
+};
+
 #define ARCH_HAS_FLUSH_ANON_PAGE
 extern void __flush_anon_page(struct page *page, unsigned long);
 
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index 96a41872dfd..975899d8356 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -97,13 +97,15 @@ static void sh2a__flush_invalidate_region(void *start, int size)
 }
 
 /* WBack O-Cache and flush I-Cache */
-static void sh2a_flush_icache_range(unsigned long start, unsigned long end)
+static void sh2a_flush_icache_range(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long start, end;
 	unsigned long v;
 	unsigned long flags;
 
-	start = start & ~(L1_CACHE_BYTES-1);
-	end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
+	start = data->addr1 & ~(L1_CACHE_BYTES-1);
+	end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
 
 	local_irq_save(flags);
 	jump_to_uncached();
@@ -130,7 +132,7 @@ static void sh2a_flush_icache_range(unsigned long start, unsigned long end)
 
 void __init sh2a_cache_init(void)
 {
-	flush_icache_range		= sh2a_flush_icache_range;
+	local_flush_icache_range	= sh2a_flush_icache_range;
 
 	__flush_wback_region		= sh2a__flush_wback_region;
 	__flush_purge_region		= sh2a__flush_purge_region;
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 6c2db140108..9201b37c7cc 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -43,15 +43,20 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
  * Called from kernel/module.c:sys_init_module and routine for a.out format,
  * signal handler code and kprobes code
  */
-static void sh4_flush_icache_range(unsigned long start, unsigned long end)
+static void sh4_flush_icache_range(void *args)
 {
+	struct flusher_data *data = args;
 	int icacheaddr;
+	unsigned long start, end;
 	unsigned long flags, v;
 	int i;
 
+	start = data->addr1;
+	end = data->addr2;
+
        /* If there are too many pages then just blow the caches */
         if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-                flush_cache_all();
+                local_flush_cache_all(args);
        } else {
                /* selectively flush d-cache then invalidate the i-cache */
                /* this is inefficient, so only use for small ranges */
@@ -104,7 +109,7 @@ static inline void flush_cache_4096(unsigned long start,
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-static void sh4_flush_dcache_page(struct page *page)
+static void sh4_flush_dcache_page(void *page)
 {
 #ifndef CONFIG_SMP
 	struct address_space *mapping = page_mapping(page);
@@ -155,7 +160,7 @@ static inline void flush_dcache_all(void)
 	wmb();
 }
 
-static void sh4_flush_cache_all(void)
+static void sh4_flush_cache_all(void *unused)
 {
 	flush_dcache_all();
 	flush_icache_all();
@@ -247,8 +252,10 @@ loop_exit:
  *
  * Caller takes mm->mmap_sem.
  */
-static void sh4_flush_cache_mm(struct mm_struct *mm)
+static void sh4_flush_cache_mm(void *arg)
 {
+	struct mm_struct *mm = arg;
+
 	if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
 		return;
 
@@ -287,12 +294,18 @@ static void sh4_flush_cache_mm(struct mm_struct *mm)
  * ADDR: Virtual Address (U0 address)
  * PFN: Physical page number
  */
-static void sh4_flush_cache_page(struct vm_area_struct *vma,
-		unsigned long address, unsigned long pfn)
+static void sh4_flush_cache_page(void *args)
 {
-	unsigned long phys = pfn << PAGE_SHIFT;
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long address, pfn, phys;
 	unsigned int alias_mask;
 
+	vma = data->vma;
+	address = data->addr1;
+	pfn = data->addr2;
+	phys = pfn << PAGE_SHIFT;
+
 	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
 		return;
 
@@ -335,9 +348,16 @@ static void sh4_flush_cache_page(struct vm_area_struct *vma,
  * Flushing the cache lines for U0 only isn't enough.
  * We need to flush for P1 too, which may contain aliases.
  */
-static void sh4_flush_cache_range(struct vm_area_struct *vma,
-		unsigned long start, unsigned long end)
+static void sh4_flush_cache_range(void *args)
 {
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long start, end;
+
+	vma = data->vma;
+	start = data->addr1;
+	end = data->addr2;
+
 	if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
 		return;
 
@@ -663,13 +683,13 @@ void __init sh4_cache_init(void)
 		break;
 	}
 
-	flush_icache_range	= sh4_flush_icache_range;
-	flush_dcache_page	= sh4_flush_dcache_page;
-	flush_cache_all		= sh4_flush_cache_all;
-	flush_cache_mm		= sh4_flush_cache_mm;
-	flush_cache_dup_mm	= sh4_flush_cache_mm;
-	flush_cache_page	= sh4_flush_cache_page;
-	flush_cache_range	= sh4_flush_cache_range;
+	local_flush_icache_range	= sh4_flush_icache_range;
+	local_flush_dcache_page		= sh4_flush_dcache_page;
+	local_flush_cache_all		= sh4_flush_cache_all;
+	local_flush_cache_mm		= sh4_flush_cache_mm;
+	local_flush_cache_dup_mm	= sh4_flush_cache_mm;
+	local_flush_cache_page		= sh4_flush_cache_page;
+	local_flush_cache_range		= sh4_flush_cache_range;
 
 	sh4__flush_region_init();
 }
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index d4a445c865d..467ff8e260f 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -483,7 +483,7 @@ static void sh64_dcache_purge_user_range(struct mm_struct *mm,
  * Invalidate the entire contents of both caches, after writing back to
  * memory any dirty data from the D-cache.
  */
-static void sh5_flush_cache_all(void)
+static void sh5_flush_cache_all(void *unused)
 {
 	sh64_dcache_purge_all();
 	sh64_icache_inv_all();
@@ -510,7 +510,7 @@ static void sh5_flush_cache_all(void)
  * I-cache.  This is similar to the lack of action needed in
  * flush_tlb_mm - see fault.c.
  */
-static void sh5_flush_cache_mm(struct mm_struct *mm)
+static void sh5_flush_cache_mm(void *unused)
 {
 	sh64_dcache_purge_all();
 }
@@ -522,13 +522,18 @@ static void sh5_flush_cache_mm(struct mm_struct *mm)
  *
  * Note, 'end' is 1 byte beyond the end of the range to flush.
  */
-static void sh5_flush_cache_range(struct vm_area_struct *vma,
-		unsigned long start, unsigned long end)
+static void sh5_flush_cache_range(void *args)
 {
-	struct mm_struct *mm = vma->vm_mm;
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long start, end;
 
-	sh64_dcache_purge_user_range(mm, start, end);
-	sh64_icache_inv_user_page_range(mm, start, end);
+	vma = data->vma;
+	start = data->addr1;
+	end = data->addr2;
+
+	sh64_dcache_purge_user_range(vma->vm_mm, start, end);
+	sh64_icache_inv_user_page_range(vma->vm_mm, start, end);
 }
 
 /*
@@ -540,16 +545,23 @@ static void sh5_flush_cache_range(struct vm_area_struct *vma,
  *
  * Note, this is called with pte lock held.
  */
-static void sh5_flush_cache_page(struct vm_area_struct *vma,
-		unsigned long eaddr, unsigned long pfn)
+static void sh5_flush_cache_page(void *args)
 {
+	struct flusher_data *data = args;
+	struct vm_area_struct *vma;
+	unsigned long eaddr, pfn;
+
+	vma = data->vma;
+	eaddr = data->addr1;
+	pfn = data->addr2;
+
 	sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT);
 
 	if (vma->vm_flags & VM_EXEC)
 		sh64_icache_inv_user_page(vma, eaddr);
 }
 
-static void sh5_flush_dcache_page(struct page *page)
+static void sh5_flush_dcache_page(void *page)
 {
 	sh64_dcache_purge_phy_page(page_to_phys(page));
 	wmb();
@@ -563,8 +575,14 @@ static void sh5_flush_dcache_page(struct page *page)
  * mapping, therefore it's guaranteed that there no cache entries for
  * the range in cache sets of the wrong colour.
  */
-static void sh5_flush_icache_range(unsigned long start, unsigned long end)
+static void sh5_flush_icache_range(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long start, end;
+
+	start = data->addr1;
+	end = data->addr2;
+
 	__flush_purge_region((void *)start, end);
 	wmb();
 	sh64_icache_inv_kernel_range(start, end);
@@ -576,25 +594,25 @@ static void sh5_flush_icache_range(unsigned long start, unsigned long end)
  * current process.  Used to flush signal trampolines on the stack to
  * make them executable.
  */
-static void sh5_flush_cache_sigtramp(unsigned long vaddr)
+static void sh5_flush_cache_sigtramp(void *vaddr)
 {
-	unsigned long end = vaddr + L1_CACHE_BYTES;
+	unsigned long end = (unsigned long)vaddr + L1_CACHE_BYTES;
 
-	__flush_wback_region((void *)vaddr, L1_CACHE_BYTES);
+	__flush_wback_region(vaddr, L1_CACHE_BYTES);
 	wmb();
-	sh64_icache_inv_current_user_range(vaddr, end);
+	sh64_icache_inv_current_user_range((unsigned long)vaddr, end);
 }
 
 void __init sh5_cache_init(void)
 {
-	flush_cache_all		= sh5_flush_cache_all;
-	flush_cache_mm		= sh5_flush_cache_mm;
-	flush_cache_dup_mm	= sh5_flush_cache_mm;
-	flush_cache_page	= sh5_flush_cache_page;
-	flush_cache_range	= sh5_flush_cache_range;
-	flush_dcache_page	= sh5_flush_dcache_page;
-	flush_icache_range	= sh5_flush_icache_range;
-	flush_cache_sigtramp	= sh5_flush_cache_sigtramp;
+	local_flush_cache_all		= sh5_flush_cache_all;
+	local_flush_cache_mm		= sh5_flush_cache_mm;
+	local_flush_cache_dup_mm	= sh5_flush_cache_mm;
+	local_flush_cache_page		= sh5_flush_cache_page;
+	local_flush_cache_range		= sh5_flush_cache_range;
+	local_flush_dcache_page		= sh5_flush_dcache_page;
+	local_flush_icache_range	= sh5_flush_icache_range;
+	local_flush_cache_sigtramp	= sh5_flush_cache_sigtramp;
 
 	/* Reserve a slot for dcache colouring in the DTLB */
 	dtlb_cache_slot	= sh64_get_wired_dtlb_entry();
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index f1d5c803c04..6293f57fa88 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -64,8 +64,14 @@ static inline void cache_wback_all(void)
  *
  * Called from kernel/module.c:sys_init_module and routine for a.out format.
  */
-static void sh7705_flush_icache_range(unsigned long start, unsigned long end)
+static void sh7705_flush_icache_range(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long start, end;
+
+	start = data->addr1;
+	end = data->addr2;
+
 	__flush_wback_region((void *)start, end - start);
 }
 
@@ -127,7 +133,7 @@ static void __flush_dcache_page(unsigned long phys)
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-static void sh7705_flush_dcache_page(struct page *page)
+static void sh7705_flush_dcache_page(void *page)
 {
 	struct address_space *mapping = page_mapping(page);
 
@@ -137,7 +143,7 @@ static void sh7705_flush_dcache_page(struct page *page)
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
-static void sh7705_flush_cache_all(void)
+static void sh7705_flush_cache_all(void *args)
 {
 	unsigned long flags;
 
@@ -149,44 +155,16 @@ static void sh7705_flush_cache_all(void)
 	local_irq_restore(flags);
 }
 
-static void sh7705_flush_cache_mm(struct mm_struct *mm)
-{
-	/* Is there any good way? */
-	/* XXX: possibly call flush_cache_range for each vm area */
-	flush_cache_all();
-}
-
-/*
- * Write back and invalidate D-caches.
- *
- * START, END: Virtual Address (U0 address)
- *
- * NOTE: We need to flush the _physical_ page entry.
- * Flushing the cache lines for U0 only isn't enough.
- * We need to flush for P1 too, which may contain aliases.
- */
-static void sh7705_flush_cache_range(struct vm_area_struct *vma,
-			unsigned long start, unsigned long end)
-{
-
-	/*
-	 * We could call flush_cache_page for the pages of these range,
-	 * but it's not efficient (scan the caches all the time...).
-	 *
-	 * We can't use A-bit magic, as there's the case we don't have
-	 * valid entry on TLB.
-	 */
-	flush_cache_all();
-}
-
 /*
  * Write back and invalidate I/D-caches for the page.
  *
  * ADDRESS: Virtual Address (U0 address)
  */
-static void sh7705_flush_cache_page(struct vm_area_struct *vma,
-		unsigned long address, unsigned long pfn)
+static void sh7705_flush_cache_page(void *args)
 {
+	struct flusher_data *data = args;
+	unsigned long pfn = data->addr2;
+
 	__flush_dcache_page(pfn << PAGE_SHIFT);
 }
 
@@ -198,20 +176,19 @@ static void sh7705_flush_cache_page(struct vm_area_struct *vma,
  * Not entirely sure why this is necessary on SH3 with 32K cache but
  * without it we get occasional "Memory fault" when loading a program.
  */
-static void sh7705_flush_icache_page(struct vm_area_struct *vma,
-				     struct page *page)
+static void sh7705_flush_icache_page(void *page)
 {
 	__flush_purge_region(page_address(page), PAGE_SIZE);
 }
 
 void __init sh7705_cache_init(void)
 {
-	flush_icache_range	= sh7705_flush_icache_range;
-	flush_dcache_page	= sh7705_flush_dcache_page;
-	flush_cache_all		= sh7705_flush_cache_all;
-	flush_cache_mm		= sh7705_flush_cache_mm;
-	flush_cache_dup_mm	= sh7705_flush_cache_mm;
-	flush_cache_range	= sh7705_flush_cache_range;
-	flush_cache_page	= sh7705_flush_cache_page;
-	flush_icache_page	= sh7705_flush_icache_page;
+	local_flush_icache_range	= sh7705_flush_icache_range;
+	local_flush_dcache_page		= sh7705_flush_dcache_page;
+	local_flush_cache_all		= sh7705_flush_cache_all;
+	local_flush_cache_mm		= sh7705_flush_cache_all;
+	local_flush_cache_dup_mm	= sh7705_flush_cache_all;
+	local_flush_cache_range		= sh7705_flush_cache_all;
+	local_flush_cache_page		= sh7705_flush_cache_page;
+	local_flush_icache_page		= sh7705_flush_icache_page;
 }
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index d6023946043..411fe605842 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -1,5 +1,5 @@
 /*
- * arch/sh/mm/pg-mmu.c
+ * arch/sh/mm/cache.c
  *
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  * Copyright (C) 2002 - 2009  Paul Mundt
@@ -10,63 +10,26 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/fs.h>
+#include <linux/smp.h>
 #include <linux/highmem.h>
 #include <linux/module.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 
-void (*flush_cache_all)(void);
-void (*flush_cache_mm)(struct mm_struct *mm);
-void (*flush_cache_dup_mm)(struct mm_struct *mm);
-void (*flush_cache_page)(struct vm_area_struct *vma,
-				unsigned long addr, unsigned long pfn);
-void (*flush_cache_range)(struct vm_area_struct *vma,
-				 unsigned long start, unsigned long end);
-void (*flush_dcache_page)(struct page *page);
-void (*flush_icache_range)(unsigned long start, unsigned long end);
-void (*flush_icache_page)(struct vm_area_struct *vma,
-				 struct page *page);
-void (*flush_cache_sigtramp)(unsigned long address);
+void (*local_flush_cache_all)(void *args) = cache_noop;
+void (*local_flush_cache_mm)(void *args) = cache_noop;
+void (*local_flush_cache_dup_mm)(void *args) = cache_noop;
+void (*local_flush_cache_page)(void *args) = cache_noop;
+void (*local_flush_cache_range)(void *args) = cache_noop;
+void (*local_flush_dcache_page)(void *args) = cache_noop;
+void (*local_flush_icache_range)(void *args) = cache_noop;
+void (*local_flush_icache_page)(void *args) = cache_noop;
+void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
+
 void (*__flush_wback_region)(void *start, int size);
 void (*__flush_purge_region)(void *start, int size);
 void (*__flush_invalidate_region)(void *start, int size);
 
-static inline void noop_flush_cache_all(void)
-{
-}
-
-static inline void noop_flush_cache_mm(struct mm_struct *mm)
-{
-}
-
-static inline void noop_flush_cache_page(struct vm_area_struct *vma,
-				unsigned long addr, unsigned long pfn)
-{
-}
-
-static inline void noop_flush_cache_range(struct vm_area_struct *vma,
-				 unsigned long start, unsigned long end)
-{
-}
-
-static inline void noop_flush_dcache_page(struct page *page)
-{
-}
-
-static inline void noop_flush_icache_range(unsigned long start,
-					   unsigned long end)
-{
-}
-
-static inline void noop_flush_icache_page(struct vm_area_struct *vma,
-					  struct page *page)
-{
-}
-
-static inline void noop_flush_cache_sigtramp(unsigned long address)
-{
-}
-
 static inline void noop__flush_region(void *start, int size)
 {
 }
@@ -184,6 +147,72 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 	}
 }
 
+void flush_cache_all(void)
+{
+	on_each_cpu(local_flush_cache_all, NULL, 1);
+}
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+	on_each_cpu(local_flush_cache_mm, mm, 1);
+}
+
+void flush_cache_dup_mm(struct mm_struct *mm)
+{
+	on_each_cpu(local_flush_cache_dup_mm, mm, 1);
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+		      unsigned long pfn)
+{
+	struct flusher_data data;
+
+	data.vma = vma;
+	data.addr1 = addr;
+	data.addr2 = pfn;
+
+	on_each_cpu(local_flush_cache_page, (void *)&data, 1);
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end)
+{
+	struct flusher_data data;
+
+	data.vma = vma;
+	data.addr1 = start;
+	data.addr2 = end;
+
+	on_each_cpu(local_flush_cache_range, (void *)&data, 1);
+}
+
+void flush_dcache_page(struct page *page)
+{
+	on_each_cpu(local_flush_dcache_page, page, 1);
+}
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	struct flusher_data data;
+
+	data.vma = NULL;
+	data.addr1 = start;
+	data.addr2 = end;
+
+	on_each_cpu(local_flush_icache_range, (void *)&data, 1);
+}
+
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+	/* Nothing uses the VMA, so just pass the struct page along */
+	on_each_cpu(local_flush_icache_page, page, 1);
+}
+
+void flush_cache_sigtramp(unsigned long address)
+{
+	on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
+}
+
 static void compute_alias(struct cache_info *c)
 {
 	c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1);
@@ -230,16 +259,6 @@ void __init cpu_cache_init(void)
 	compute_alias(&boot_cpu_data.dcache);
 	compute_alias(&boot_cpu_data.scache);
 
-	flush_cache_all		= noop_flush_cache_all;
-	flush_cache_mm		= noop_flush_cache_mm;
-	flush_cache_dup_mm	= noop_flush_cache_mm;
-	flush_cache_page	= noop_flush_cache_page;
-	flush_cache_range	= noop_flush_cache_range;
-	flush_dcache_page	= noop_flush_dcache_page;
-	flush_icache_range	= noop_flush_icache_range;
-	flush_icache_page	= noop_flush_icache_page;
-	flush_cache_sigtramp	= noop_flush_cache_sigtramp;
-
 	__flush_wback_region		= noop__flush_region;
 	__flush_purge_region		= noop__flush_region;
 	__flush_invalidate_region	= noop__flush_region;
-- 
cgit v1.2.3


From c01f0f1a4a96eb3acc5850e18cc43f24366966d0 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Fri, 21 Aug 2009 16:30:28 +0900
Subject: sh: Add initial support for SH7757 CPU subtype

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                         |    7 +
 arch/sh/Kconfig.debug                   |    1 +
 arch/sh/include/asm/processor.h         |    2 +-
 arch/sh/include/cpu-sh4/cpu/freq.h      |    4 +
 arch/sh/include/cpu-sh4/cpu/sh7757.h    |  243 ++++
 arch/sh/kernel/cpu/sh4/probe.c          |   11 +-
 arch/sh/kernel/cpu/sh4a/Makefile        |    3 +
 arch/sh/kernel/cpu/sh4a/clock-sh7757.c  |  130 ++
 arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 2019 +++++++++++++++++++++++++++++++
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c  |  513 ++++++++
 arch/sh/kernel/setup.c                  |    2 +-
 arch/sh/mm/Kconfig                      |    7 +-
 12 files changed, 2935 insertions(+), 7 deletions(-)
 create mode 100644 arch/sh/include/cpu-sh4/cpu/sh7757.h
 create mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7757.c
 create mode 100644 arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
 create mode 100644 arch/sh/kernel/cpu/sh4a/setup-sh7757.c

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index c4a955d2545..d17570c61df 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -396,6 +396,13 @@ config CPU_SUBTYPE_SH7724
 	help
 	  Select SH7724 if you have an SH-MobileR2R CPU.
 
+config CPU_SUBTYPE_SH7757
+	bool "Support SH7757 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	help
+	  Select SH7757 if you have a SH4A SH7757 CPU.
+
 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 741d20fab2e..55907af1dc2 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -38,6 +38,7 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
 				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
 				CPU_SUBTYPE_SH7343
+	default "0xfe4c0000" if CPU_SUBTYPE_SH7757
 	default "0xffeb0000" if CPU_SUBTYPE_SH7785
 	default "0xffeb0000" if CPU_SUBTYPE_SH7786
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index ff7daaf9a62..9d87868bc53 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -32,7 +32,7 @@ enum cpu_type {
 
 	/* SH-4A types */
 	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
-	CPU_SH7723, CPU_SH7724, CPU_SHX3,
+	CPU_SH7723, CPU_SH7724, CPU_SH7757, CPU_SHX3,
 
 	/* SH4AL-DSP types */
 	CPU_SH7343, CPU_SH7722, CPU_SH7366,
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
index ccf1d999db6..e1e90960ee9 100644
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -22,6 +22,10 @@
 #define MSTPCR0			0xa4150030
 #define MSTPCR1			0xa4150034
 #define MSTPCR2			0xa4150038
+#elif defined(CONFIG_CPU_SUBTYPE_SH7757)
+#define	FRQCR			0xffc80000
+#define	OSCCR			0xffc80018
+#define	PLLCR			0xffc80024
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
       defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define	FRQCR			0xffc80000
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h
new file mode 100644
index 00000000000..f4d267efad7
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h
@@ -0,0 +1,243 @@
+#ifndef __ASM_SH7757_H__
+#define __ASM_SH7757_H__
+
+enum {
+	/* PTA */
+	GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+	GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+	/* PTB */
+	GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+	GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+	/* PTC */
+	GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+	GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+	/* PTD */
+	GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+	GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+	/* PTE */
+	GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+	GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+	/* PTF */
+	GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+	GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+	/* PTG */
+	GPIO_PTG7, GPIO_PTG6, GPIO_PTG5, GPIO_PTG4,
+	GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+	/* PTH */
+	GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+	GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+	/* PTI */
+	GPIO_PTI7, GPIO_PTI6, GPIO_PTI5, GPIO_PTI4,
+	GPIO_PTI3, GPIO_PTI2, GPIO_PTI1, GPIO_PTI0,
+
+	/* PTJ */
+	GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5, GPIO_PTJ4,
+	GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+	/* PTK */
+	GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+	GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+	/* PTL */
+	GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+	GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+	/* PTM */
+		   GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+	GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+	/* PTN */
+	GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+	GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+	/* PTO */
+	GPIO_PTO7, GPIO_PTO6, GPIO_PTO5, GPIO_PTO4,
+	GPIO_PTO3, GPIO_PTO2, GPIO_PTO1, GPIO_PTO0,
+
+	/* PTP */
+		   GPIO_PTP6, GPIO_PTP5, GPIO_PTP4,
+	GPIO_PTP3, GPIO_PTP2, GPIO_PTP1, GPIO_PTP0,
+
+	/* PTQ */
+		   GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+	GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+	/* PTR */
+	GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+	GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+	/* PTS */
+	GPIO_PTS7, GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+	GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+	/* PTT */
+			      GPIO_PTT5, GPIO_PTT4,
+	GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+	/* PTU */
+	GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
+	GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+	/* PTV */
+	GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+	GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+	/* PTW */
+	GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+	GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+	/* PTX */
+	GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+	GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+	/* PTY */
+	GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+	GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+	/* PTZ */
+	GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+	GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+
+	/* PTA (mobule: LBSC, CPG, LPC) */
+	GPIO_FN_BS,	GPIO_FN_RDWR,	GPIO_FN_WE1,	GPIO_FN_RDY,
+	GPIO_FN_MD10,	GPIO_FN_MD9,	GPIO_FN_MD8,
+	GPIO_FN_LGPIO7,	GPIO_FN_LGPIO6,	GPIO_FN_LGPIO5,	GPIO_FN_LGPIO4,
+	GPIO_FN_LGPIO3,	GPIO_FN_LGPIO2,	GPIO_FN_LGPIO1,	GPIO_FN_LGPIO0,
+
+	/* PTB (mobule: LBSC, EtherC, SIM, LPC) */
+	GPIO_FN_D15,	GPIO_FN_D14,	GPIO_FN_D13,	GPIO_FN_D12,
+	GPIO_FN_D11,	GPIO_FN_D10,	GPIO_FN_D9,	GPIO_FN_D8,
+	GPIO_FN_ET0_MDC,		GPIO_FN_ET0_MDIO,
+	GPIO_FN_ET1_MDC,		GPIO_FN_ET1_MDIO,
+	GPIO_FN_SIM_D,	GPIO_FN_SIM_CLK,		GPIO_FN_SIM_RST,
+	GPIO_FN_WPSZ1,	GPIO_FN_WPSZ0,	GPIO_FN_FWID,	GPIO_FN_FLSHSZ,
+	GPIO_FN_LPC_SPIEN,		GPIO_FN_BASEL,
+
+	/* PTC (mobule: SD) */
+	GPIO_FN_SD_WP,	GPIO_FN_SD_CD,	GPIO_FN_SD_CLK,	GPIO_FN_SD_CMD,
+	GPIO_FN_SD_D3,	GPIO_FN_SD_D2,	GPIO_FN_SD_D1,	GPIO_FN_SD_D0,
+
+	/* PTD (mobule: INTC, SPI0, LBSC, CPG, ADC) */
+	GPIO_FN_IRQ7,	GPIO_FN_IRQ6,	GPIO_FN_IRQ5,	GPIO_FN_IRQ4,
+	GPIO_FN_IRQ3,	GPIO_FN_IRQ2,	GPIO_FN_IRQ1,	GPIO_FN_IRQ0,
+	GPIO_FN_MD6,	GPIO_FN_MD5,	GPIO_FN_MD3,	GPIO_FN_MD2,
+	GPIO_FN_MD1,	GPIO_FN_MD0,	GPIO_FN_ADTRG1,	GPIO_FN_ADTRG0,
+
+	/* PTE (mobule: EtherC) */
+	GPIO_FN_ET0_CRS_DV,		GPIO_FN_ET0_TXD1,
+	GPIO_FN_ET0_TXD0,		GPIO_FN_ET0_TX_EN,
+	GPIO_FN_ET0_REF_CLK,		GPIO_FN_ET0_RXD1,
+	GPIO_FN_ET0_RXD0,		GPIO_FN_ET0_RX_ER,
+
+	/* PTF (mobule: EtherC) */
+	GPIO_FN_ET1_CRS_DV,		GPIO_FN_ET1_TXD1,
+	GPIO_FN_ET1_TXD0,		GPIO_FN_ET1_TX_EN,
+	GPIO_FN_ET1_REF_CLK,		GPIO_FN_ET1_RXD1,
+	GPIO_FN_ET1_RXD0,		GPIO_FN_ET1_RX_ER,
+
+	/* PTG (mobule: SYSTEM, PWMX, LPC) */
+	GPIO_FN_STATUS0,		GPIO_FN_STATUS1,
+	GPIO_FN_PWX0,	GPIO_FN_PWX1,	GPIO_FN_PWX2,	GPIO_FN_PWX3,
+	GPIO_FN_SERIRQ,	GPIO_FN_CLKRUN,	GPIO_FN_LPCPD,	GPIO_FN_LDRQ,
+
+	/* PTH (mobule: TMU, SCIF234, SPI1, SPI0) */
+	GPIO_FN_TCLK,	GPIO_FN_RXD4,	GPIO_FN_TXD4,
+	GPIO_FN_SP1_MOSI,		GPIO_FN_SP1_MISO,
+	GPIO_FN_SP1_SCK,		GPIO_FN_SP1_SCK_FB,
+	GPIO_FN_SP1_SS0,		GPIO_FN_SP1_SS1,
+	GPIO_FN_SP0_SS1,
+
+	/* PTI (mobule: INTC) */
+	GPIO_FN_IRQ15,	GPIO_FN_IRQ14,	GPIO_FN_IRQ13,	GPIO_FN_IRQ12,
+	GPIO_FN_IRQ11,	GPIO_FN_IRQ10,	GPIO_FN_IRQ9,	GPIO_FN_IRQ8,
+
+	/* PTJ (mobule: SCIF234, SERMUX) */
+	GPIO_FN_RXD3,	GPIO_FN_TXD3,	GPIO_FN_RXD2,	GPIO_FN_TXD2,
+	GPIO_FN_COM1_TXD,		GPIO_FN_COM1_RXD,
+	GPIO_FN_COM1_RTS,		GPIO_FN_COM1_CTS,
+
+	/* PTK (mobule: SERMUX) */
+	GPIO_FN_COM2_TXD,		GPIO_FN_COM2_RXD,
+	GPIO_FN_COM2_RTS,		GPIO_FN_COM2_CTS,
+	GPIO_FN_COM2_DTR,		GPIO_FN_COM2_DSR,
+	GPIO_FN_COM2_DCD,		GPIO_FN_COM2_RI,
+
+	/* PTL (mobule: SERMUX) */
+	GPIO_FN_RAC_TXD,		GPIO_FN_RAC_RXD,
+	GPIO_FN_RAC_RTS,		GPIO_FN_RAC_CTS,
+	GPIO_FN_RAC_DTR,		GPIO_FN_RAC_DSR,
+	GPIO_FN_RAC_DCD,		GPIO_FN_RAC_RI,
+
+	/* PTM (mobule: IIC, LPC) */
+	GPIO_FN_SDA6,	GPIO_FN_SCL6,	GPIO_FN_SDA7,	GPIO_FN_SCL7,
+	GPIO_FN_WP,	GPIO_FN_FMS0,	GPIO_FN_FMS1,
+
+	/* PTN (mobule: SCIF234, EVC) */
+	GPIO_FN_SCK2,	GPIO_FN_RTS4,	GPIO_FN_RTS3,	GPIO_FN_RTS2,
+	GPIO_FN_CTS4,	GPIO_FN_CTS3,	GPIO_FN_CTS2,
+	GPIO_FN_EVENT7,	GPIO_FN_EVENT6,	GPIO_FN_EVENT5,	GPIO_FN_EVENT4,
+	GPIO_FN_EVENT3,	GPIO_FN_EVENT2,	GPIO_FN_EVENT1,	GPIO_FN_EVENT0,
+
+	/* PTO (mobule: SGPIO) */
+	GPIO_FN_SGPIO0_CLK,		GPIO_FN_SGPIO0_LOAD,
+	GPIO_FN_SGPIO0_DI,		GPIO_FN_SGPIO0_DO,
+	GPIO_FN_SGPIO1_CLK,		GPIO_FN_SGPIO1_LOAD,
+	GPIO_FN_SGPIO1_DI,		GPIO_FN_SGPIO1_DO,
+
+	/* PTP (mobule: JMC, SCIF234) */
+	GPIO_FN_JMCTCK,	GPIO_FN_JMCTMS,	GPIO_FN_JMCTDO,	GPIO_FN_JMCTDI,
+	GPIO_FN_JMCRST,	GPIO_FN_SCK4,	GPIO_FN_SCK3,
+
+	/* PTQ (mobule: LPC) */
+	GPIO_FN_LAD3,	GPIO_FN_LAD2,	GPIO_FN_LAD1,	GPIO_FN_LAD0,
+	GPIO_FN_LFRAME,	GPIO_FN_LRESET,	GPIO_FN_LCLK,
+
+	/* PTR (mobule: GRA, IIC) */
+	GPIO_FN_DDC3,	GPIO_FN_DDC2,
+	GPIO_FN_SDA8,	GPIO_FN_SCL8,	GPIO_FN_SDA2,	GPIO_FN_SCL2,
+	GPIO_FN_SDA1,	GPIO_FN_SCL1,	GPIO_FN_SDA0,	GPIO_FN_SCL0,
+
+	/* PTS (mobule: GRA, IIC) */
+	GPIO_FN_DDC1,	GPIO_FN_DDC0,
+	GPIO_FN_SDA9,	GPIO_FN_SCL9,	GPIO_FN_SDA5,	GPIO_FN_SCL5,
+	GPIO_FN_SDA4,	GPIO_FN_SCL4,	GPIO_FN_SDA3,	GPIO_FN_SCL3,
+
+	/* PTT (mobule: SYSTEM, PWMX) */
+	GPIO_FN_AUDSYNC,		GPIO_FN_AUDCK,
+	GPIO_FN_AUDATA3,		GPIO_FN_AUDATA2,
+	GPIO_FN_AUDATA1,		GPIO_FN_AUDATA0,
+	GPIO_FN_PWX7,	GPIO_FN_PWX6,	GPIO_FN_PWX5,	GPIO_FN_PWX4,
+
+	/* PTU (mobule: LBSC, DMAC) */
+	GPIO_FN_CS6,	GPIO_FN_CS5,	GPIO_FN_CS4,	GPIO_FN_CS0,
+	GPIO_FN_RD,	GPIO_FN_WE0,	GPIO_FN_A25,	GPIO_FN_A24,
+	GPIO_FN_DREQ0,	GPIO_FN_DACK0,
+
+	/* PTV (mobule: LBSC, DMAC) */
+	GPIO_FN_A23,	GPIO_FN_A22,	GPIO_FN_A21,	GPIO_FN_A20,
+	GPIO_FN_A19,	GPIO_FN_A18,	GPIO_FN_A17,	GPIO_FN_A16,
+	GPIO_FN_TEND0,	GPIO_FN_DREQ1,	GPIO_FN_DACK1,	GPIO_FN_TEND1,
+
+	/* PTW (mobule: LBSC) */
+	GPIO_FN_A15,	GPIO_FN_A14,	GPIO_FN_A13,	GPIO_FN_A12,
+	GPIO_FN_A11,	GPIO_FN_A10,	GPIO_FN_A9,	GPIO_FN_A8,
+
+	/* PTX (mobule: LBSC) */
+	GPIO_FN_A7,	GPIO_FN_A6,	GPIO_FN_A5,	GPIO_FN_A4,
+	GPIO_FN_A3,	GPIO_FN_A2,	GPIO_FN_A1,	GPIO_FN_A0,
+
+	/* PTY (mobule: LBSC) */
+	GPIO_FN_D7,	GPIO_FN_D6,	GPIO_FN_D5,	GPIO_FN_D4,
+	GPIO_FN_D3,	GPIO_FN_D2,	GPIO_FN_D1,	GPIO_FN_D0,
+};
+
+#endif /* __ASM_SH7757_H__ */
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 6c78d0a9c85..10e6795b56a 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -139,8 +139,15 @@ int __init detect_cpu_and_cache_system(void)
 		}
 		break;
 	case 0x300b:
-		boot_cpu_data.type = CPU_SH7724;
-		boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+		switch (prr) {
+		case 0x20:
+			boot_cpu_data.type = CPU_SH7723;
+			boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+			break;
+		case 0x50:
+			boot_cpu_data.type = CPU_SH7757;
+			break;
+		}
 		break;
 	case 0x4000:	/* 1st cut */
 	case 0x4001:	/* 2nd cut */
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 12cddf4c721..490d5dc9e37 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -3,6 +3,7 @@
 #
 
 # CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7757)	+= setup-sh7757.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= setup-sh7763.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
@@ -19,6 +20,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 smp-$(CONFIG_CPU_SHX3)			:= smp-shx3.o
 
 # Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SUBTYPE_SH7757)	:= clock-sh7757.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
@@ -35,6 +37,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7722)	:= pinmux-sh7722.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7723)	:= pinmux-sh7723.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7724)	:= pinmux-sh7724.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7757)	:= pinmux-sh7757.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
new file mode 100644
index 00000000000..ddc235ca966
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -0,0 +1,130 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7757.c
+ *
+ * SH7757 support for the clock framework
+ *
+ *  Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+
+static int ifc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			      16, 1, 1, 32, 1, 1, 1, 1 };
+static int sfc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			      16, 1, 1, 32, 1, 1, 1, 1 };
+static int bfc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			      16, 1, 1, 32, 1, 1, 1, 1 };
+static int p1fc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
+			       16, 1, 1, 32, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate = CONFIG_SH_PCLK_FREQ * 16;
+}
+
+static struct clk_ops sh7757_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = ctrl_inl(FRQCR) & 0x0000000f;
+	clk->rate = clk->parent->rate / p1fc_divisors[idx];
+}
+
+static struct clk_ops sh7757_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 8) & 0x0000000f;
+	clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7757_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 20) & 0x0000000f;
+	clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7757_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7757_clk_ops[] = {
+	&sh7757_master_clk_ops,
+	&sh7757_module_clk_ops,
+	&sh7757_bus_clk_ops,
+	&sh7757_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7757_clk_ops))
+		*ops = sh7757_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+	int idx = (ctrl_inl(FRQCR) >> 12) & 0x0000000f;
+	clk->rate = clk->parent->rate / sfc_divisors[idx];
+}
+
+static struct clk_ops sh7757_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk sh7757_shyway_clk = {
+	.name		= "shyway_clk",
+	.flags		= CLK_ENABLE_ON_INIT,
+	.ops		= &sh7757_shyway_clk_ops,
+};
+
+/*
+ * Additional sh7757-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7757_onchip_clocks[] = {
+	&sh7757_shyway_clk,
+};
+
+static int __init sh7757_clk_init(void)
+{
+	struct clk *clk = clk_get(NULL, "master_clk");
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sh7757_onchip_clocks); i++) {
+		struct clk *clkp = sh7757_onchip_clocks[i];
+
+		clkp->parent = clk;
+		clk_register(clkp);
+		clk_enable(clkp);
+	}
+
+	/*
+	 * Now that we have the rest of the clocks registered, we need to
+	 * force the parent clock to propagate so that these clocks will
+	 * automatically figure out their rate. We cheat by handing the
+	 * parent clock its current rate and forcing child propagation.
+	 */
+	clk_set_rate(clk, clk_get_rate(clk));
+
+	clk_put(clk);
+
+	return 0;
+}
+
+arch_initcall(sh7757_clk_init);
+
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
new file mode 100644
index 00000000000..ed23b155c09
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c
@@ -0,0 +1,2019 @@
+/*
+ * SH7757 (A0 step) Pinmux
+ *
+ *  Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ *  Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * Based on SH7757 Pinmux
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7757.h>
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+	PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+	PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+	PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+	PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+	PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
+	PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+	PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+	PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+	PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
+	PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+	PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+	PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
+	PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+	PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+	PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+	PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
+	PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA,
+	PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
+	PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
+	PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+	PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+	PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+	PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
+	PTM6_DATA, PTM5_DATA, PTM4_DATA,
+	PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+	PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+	PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
+	PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
+	PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA,
+	PTP6_DATA, PTP5_DATA, PTP4_DATA,
+	PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA,
+	PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+	PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
+	PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+	PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+	PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+	PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+	PTT5_DATA, PTT4_DATA,
+	PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+	PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+	PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+	PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+	PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+	PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+	PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
+	PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+	PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
+	PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+	PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
+	PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+	PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+	PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+	PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+	PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+	PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
+	PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
+	PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
+	PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
+	PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
+	PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
+	PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
+	PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
+	PTG7_IN, PTG6_IN, PTG5_IN, PTG4_IN,
+	PTG3_IN, PTG2_IN, PTG1_IN, PTG0_IN,
+	PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
+	PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
+	PTI7_IN, PTI6_IN, PTI5_IN, PTI4_IN,
+	PTI3_IN, PTI2_IN, PTI1_IN, PTI0_IN,
+	PTJ7_IN, PTJ6_IN, PTJ5_IN, PTJ4_IN,
+	PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
+	PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
+	PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
+	PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
+	PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
+	PTM6_IN, PTM5_IN, PTM4_IN,
+	PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+	PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
+	PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
+	PTO7_IN, PTO6_IN, PTO5_IN, PTO4_IN,
+	PTO3_IN, PTO2_IN, PTO1_IN, PTO0_IN,
+	PTP6_IN, PTP5_IN, PTP4_IN,
+	PTP3_IN, PTP2_IN, PTP1_IN, PTP0_IN,
+	PTQ6_IN, PTQ5_IN, PTQ4_IN,
+	PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
+	PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
+	PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
+	PTS7_IN, PTS6_IN, PTS5_IN, PTS4_IN,
+	PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
+	PTT5_IN, PTT4_IN,
+	PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
+	PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
+	PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+	PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
+	PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+	PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
+	PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
+	PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
+	PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
+	PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
+	PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
+	PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
+	PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PTU7_IN_PU, PTU6_IN_PU, PTU5_IN_PU, PTU4_IN_PU,
+	PTU3_IN_PU, PTU2_IN_PU, PTU1_IN_PU, PTU0_IN_PU,
+	PTV7_IN_PU, PTV6_IN_PU, PTV5_IN_PU, PTV4_IN_PU,
+	PTV3_IN_PU, PTV2_IN_PU, PTV1_IN_PU, PTV0_IN_PU,
+	PTW7_IN_PU, PTW6_IN_PU, PTW5_IN_PU, PTW4_IN_PU,
+	PTW3_IN_PU, PTW2_IN_PU, PTW1_IN_PU, PTW0_IN_PU,
+	PTX7_IN_PU, PTX6_IN_PU, PTX5_IN_PU, PTX4_IN_PU,
+	PTX3_IN_PU, PTX2_IN_PU, PTX1_IN_PU, PTX0_IN_PU,
+	PTY7_IN_PU, PTY6_IN_PU, PTY5_IN_PU, PTY4_IN_PU,
+	PTY3_IN_PU, PTY2_IN_PU, PTY1_IN_PU, PTY0_IN_PU,
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
+	PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
+	PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+	PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+	PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
+	PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
+	PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
+	PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+	PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
+	PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
+	PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
+	PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
+	PTG7_OUT, PTG6_OUT, PTG5_OUT, PTG4_OUT,
+	PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+	PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
+	PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+	PTI7_OUT, PTI6_OUT, PTI5_OUT, PTI4_OUT,
+	PTI3_OUT, PTI2_OUT, PTI1_OUT, PTI0_OUT,
+	PTJ7_OUT, PTJ6_OUT, PTJ5_OUT, PTJ4_OUT,
+	PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
+	PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
+	PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
+	PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
+	PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
+	PTM6_OUT, PTM5_OUT, PTM4_OUT,
+	PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+	PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
+	PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
+	PTO7_OUT, PTO6_OUT, PTO5_OUT, PTO4_OUT,
+	PTO3_OUT, PTO2_OUT, PTO1_OUT, PTO0_OUT,
+	PTP6_OUT, PTP5_OUT, PTP4_OUT,
+	PTP3_OUT, PTP2_OUT, PTP1_OUT, PTP0_OUT,
+	PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
+	PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
+	PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
+	PTR3_OUT, PTR2_OUT, PTR1_OUT, PTR0_OUT,
+	PTS7_OUT, PTS6_OUT, PTS5_OUT, PTS4_OUT,
+	PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
+	PTT5_OUT, PTT4_OUT,
+	PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
+	PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
+	PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
+	PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
+	PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+	PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
+	PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
+	PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
+	PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
+	PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
+	PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
+	PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
+	PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
+	PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
+	PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
+	PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
+	PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
+	PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
+	PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
+	PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
+	PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
+	PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
+	PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
+	PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
+	PTG7_FN, PTG6_FN, PTG5_FN, PTG4_FN,
+	PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
+	PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
+	PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
+	PTI7_FN, PTI6_FN, PTI5_FN, PTI4_FN,
+	PTI3_FN, PTI2_FN, PTI1_FN, PTI0_FN,
+	PTJ7_FN, PTJ6_FN, PTJ5_FN, PTJ4_FN,
+	PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
+	PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
+	PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
+	PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
+	PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
+	PTM6_FN, PTM5_FN, PTM4_FN,
+	PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
+	PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
+	PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
+	PTO7_FN, PTO6_FN, PTO5_FN, PTO4_FN,
+	PTO3_FN, PTO2_FN, PTO1_FN, PTO0_FN,
+	PTP6_FN, PTP5_FN, PTP4_FN,
+	PTP3_FN, PTP2_FN, PTP1_FN, PTP0_FN,
+	PTQ6_FN, PTQ5_FN, PTQ4_FN,
+	PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
+	PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
+	PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
+	PTS7_FN, PTS6_FN, PTS5_FN, PTS4_FN,
+	PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
+	PTT5_FN, PTT4_FN,
+	PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
+	PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
+	PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
+	PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
+	PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
+	PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
+	PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
+	PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
+	PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
+	PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
+	PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
+	PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
+	PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
+
+	PS0_15_FN1, PS0_15_FN3,
+	PS0_14_FN1, PS0_14_FN3,
+	PS0_13_FN1, PS0_13_FN3,
+	PS0_12_FN1, PS0_12_FN3,
+	PS0_7_FN1, PS0_7_FN2,
+	PS0_6_FN1, PS0_6_FN2,
+	PS0_5_FN1, PS0_5_FN2,
+	PS0_4_FN1, PS0_4_FN2,
+	PS0_3_FN1, PS0_3_FN2,
+	PS0_2_FN1, PS0_2_FN2,
+	PS0_1_FN1, PS0_1_FN2,
+
+	PS1_7_FN1, PS1_7_FN3,
+	PS1_6_FN1, PS1_6_FN3,
+
+	PS2_13_FN1, PS2_13_FN3,
+	PS2_12_FN1, PS2_12_FN3,
+	PS2_1_FN1, PS2_1_FN2,
+	PS2_0_FN1, PS2_0_FN2,
+
+	PS4_15_FN1, PS4_15_FN2,
+	PS4_14_FN1, PS4_14_FN2,
+	PS4_13_FN1, PS4_13_FN2,
+	PS4_12_FN1, PS4_12_FN2,
+	PS4_11_FN1, PS4_11_FN2,
+	PS4_10_FN1, PS4_10_FN2,
+	PS4_9_FN1, PS4_9_FN2,
+	PS4_3_FN1, PS4_3_FN2,
+	PS4_2_FN1, PS4_2_FN2,
+	PS4_1_FN1, PS4_1_FN2,
+	PS4_0_FN1, PS4_0_FN2,
+
+	PS5_9_FN1, PS5_9_FN2,
+	PS5_8_FN1, PS5_8_FN2,
+	PS5_7_FN1, PS5_7_FN2,
+	PS5_6_FN1, PS5_6_FN2,
+	PS5_5_FN1, PS5_5_FN2,
+	PS5_4_FN1, PS5_4_FN2,
+
+	/* AN15 to 8 : EVENT15 to 8 */
+	PS6_7_FN_AN, PS6_7_FN_EV,
+	PS6_6_FN_AN, PS6_6_FN_EV,
+	PS6_5_FN_AN, PS6_5_FN_EV,
+	PS6_4_FN_AN, PS6_4_FN_EV,
+	PS6_3_FN_AN, PS6_3_FN_EV,
+	PS6_2_FN_AN, PS6_2_FN_EV,
+	PS6_1_FN_AN, PS6_1_FN_EV,
+	PS6_0_FN_AN, PS6_0_FN_EV,
+
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* PTA (mobule: LBSC, CPG, LPC) */
+	BS_MARK,	RDWR_MARK,	WE1_MARK,	RDY_MARK,
+	MD10_MARK,	MD9_MARK,	MD8_MARK,
+	LGPIO7_MARK,	LGPIO6_MARK,	LGPIO5_MARK,	LGPIO4_MARK,
+	LGPIO3_MARK,	LGPIO2_MARK,	LGPIO1_MARK,	LGPIO0_MARK,
+
+	/* PTB (mobule: LBSC, EtherC, SIM, LPC) */
+	D15_MARK,	D14_MARK,	D13_MARK,	D12_MARK,
+	D11_MARK,	D10_MARK,	D9_MARK,	D8_MARK,
+	ET0_MDC_MARK,	ET0_MDIO_MARK,	ET1_MDC_MARK,	ET1_MDIO_MARK,
+	SIM_D_MARK,	SIM_CLK_MARK,	SIM_RST_MARK,
+	WPSZ1_MARK,	WPSZ0_MARK,	FWID_MARK,	FLSHSZ_MARK,
+	LPC_SPIEN_MARK,	BASEL_MARK,
+
+	/* PTC (mobule: SD) */
+	SD_WP_MARK,	SD_CD_MARK,	SD_CLK_MARK,	SD_CMD_MARK,
+	SD_D3_MARK,	SD_D2_MARK,	SD_D1_MARK,	SD_D0_MARK,
+
+	/* PTD (mobule: INTC, SPI0, LBSC, CPG, ADC) */
+	IRQ7_MARK,	IRQ6_MARK,	IRQ5_MARK,	IRQ4_MARK,
+	IRQ3_MARK,	IRQ2_MARK,	IRQ1_MARK,	IRQ0_MARK,
+	MD6_MARK,	MD5_MARK,	MD3_MARK,	MD2_MARK,
+	MD1_MARK,	MD0_MARK,	ADTRG1_MARK,	ADTRG0_MARK,
+
+	/* PTE (mobule: EtherC) */
+	ET0_CRS_DV_MARK,	ET0_TXD1_MARK,
+	ET0_TXD0_MARK,		ET0_TX_EN_MARK,
+	ET0_REF_CLK_MARK,	ET0_RXD1_MARK,
+	ET0_RXD0_MARK,		ET0_RX_ER_MARK,
+
+	/* PTF (mobule: EtherC) */
+	ET1_CRS_DV_MARK,	ET1_TXD1_MARK,
+	ET1_TXD0_MARK,		ET1_TX_EN_MARK,
+	ET1_REF_CLK_MARK,	ET1_RXD1_MARK,
+	ET1_RXD0_MARK,		ET1_RX_ER_MARK,
+
+	/* PTG (mobule: SYSTEM, PWMX, LPC) */
+	STATUS0_MARK,	STATUS1_MARK,
+	PWX0_MARK,	PWX1_MARK,	PWX2_MARK,	PWX3_MARK,
+	SERIRQ_MARK,	CLKRUN_MARK,	LPCPD_MARK,	LDRQ_MARK,
+
+	/* PTH (mobule: TMU, SCIF234, SPI1, SPI0) */
+	TCLK_MARK,	RXD4_MARK,	TXD4_MARK,
+	SP1_MOSI_MARK,	SP1_MISO_MARK,	SP1_SCK_MARK,	SP1_SCK_FB_MARK,
+	SP1_SS0_MARK,	SP1_SS1_MARK,	SP0_SS1_MARK,
+
+	/* PTI (mobule: INTC) */
+	IRQ15_MARK,	IRQ14_MARK,	IRQ13_MARK,	IRQ12_MARK,
+	IRQ11_MARK,	IRQ10_MARK,	IRQ9_MARK,	IRQ8_MARK,
+
+	/* PTJ (mobule: SCIF234, SERMUX) */
+	RXD3_MARK,	TXD3_MARK,	RXD2_MARK,	TXD2_MARK,
+	COM1_TXD_MARK,	COM1_RXD_MARK,	COM1_RTS_MARK,	COM1_CTS_MARK,
+
+	/* PTK (mobule: SERMUX) */
+	COM2_TXD_MARK,	COM2_RXD_MARK,	COM2_RTS_MARK,	COM2_CTS_MARK,
+	COM2_DTR_MARK,	COM2_DSR_MARK,	COM2_DCD_MARK,	COM2_RI_MARK,
+
+	/* PTL (mobule: SERMUX) */
+	RAC_TXD_MARK,	RAC_RXD_MARK,	RAC_RTS_MARK,	RAC_CTS_MARK,
+	RAC_DTR_MARK,	RAC_DSR_MARK,	RAC_DCD_MARK,	RAC_RI_MARK,
+
+	/* PTM (mobule: IIC, LPC) */
+	SDA6_MARK,	SCL6_MARK,	SDA7_MARK,	SCL7_MARK,
+	WP_MARK,	FMS0_MARK,	FMS1_MARK,
+
+	/* PTN (mobule: SCIF234, EVC) */
+	SCK2_MARK,	RTS4_MARK,	RTS3_MARK,	RTS2_MARK,
+	CTS4_MARK,	CTS3_MARK,	CTS2_MARK,
+	EVENT7_MARK,	EVENT6_MARK,	EVENT5_MARK,	EVENT4_MARK,
+	EVENT3_MARK,	EVENT2_MARK,	EVENT1_MARK,	EVENT0_MARK,
+
+	/* PTO (mobule: SGPIO) */
+	SGPIO0_CLK_MARK,	SGPIO0_LOAD_MARK,
+	SGPIO0_DI_MARK,		SGPIO0_DO_MARK,
+	SGPIO1_CLK_MARK,	SGPIO1_LOAD_MARK,
+	SGPIO1_DI_MARK,		SGPIO1_DO_MARK,
+
+	/* PTP (mobule: JMC, SCIF234) */
+	JMCTCK_MARK,	JMCTMS_MARK,	JMCTDO_MARK,	JMCTDI_MARK,
+	JMCRST_MARK,	SCK4_MARK,	SCK3_MARK,
+
+	/* PTQ (mobule: LPC) */
+	LAD3_MARK,	LAD2_MARK,	LAD1_MARK,	LAD0_MARK,
+	LFRAME_MARK,	LRESET_MARK,	LCLK_MARK,
+
+	/* PTR (mobule: GRA, IIC) */
+	DDC3_MARK,	DDC2_MARK,
+	SDA8_MARK,	SCL8_MARK,	SDA2_MARK,	SCL2_MARK,
+	SDA1_MARK,	SCL1_MARK,	SDA0_MARK,	SCL0_MARK,
+
+	/* PTS (mobule: GRA, IIC) */
+	DDC1_MARK,	DDC0_MARK,
+	SDA9_MARK,	SCL9_MARK,	SDA5_MARK,	SCL5_MARK,
+	SDA4_MARK,	SCL4_MARK,	SDA3_MARK,	SCL3_MARK,
+
+	/* PTT (mobule: SYSTEM, PWMX) */
+	AUDSYNC_MARK,		AUDCK_MARK,
+	AUDATA3_MARK,		AUDATA2_MARK,
+	AUDATA1_MARK,		AUDATA0_MARK,
+	PWX7_MARK,	PWX6_MARK,	PWX5_MARK,	PWX4_MARK,
+
+	/* PTU (mobule: LBSC, DMAC) */
+	CS6_MARK,	CS5_MARK,	CS4_MARK,	CS0_MARK,
+	RD_MARK,	WE0_MARK,	A25_MARK,	A24_MARK,
+	DREQ0_MARK,	DACK0_MARK,
+
+	/* PTV (mobule: LBSC, DMAC) */
+	A23_MARK,	A22_MARK,	A21_MARK,	A20_MARK,
+	A19_MARK,	A18_MARK,	A17_MARK,	A16_MARK,
+	TEND0_MARK,	DREQ1_MARK,	DACK1_MARK,	TEND1_MARK,
+
+	/* PTW (mobule: LBSC) */
+	A15_MARK,	A14_MARK,	A13_MARK,	A12_MARK,
+	A11_MARK,	A10_MARK,	A9_MARK,	A8_MARK,
+
+	/* PTX (mobule: LBSC) */
+	A7_MARK,	A6_MARK,	A5_MARK,	A4_MARK,
+	A3_MARK,	A2_MARK,	A1_MARK,	A0_MARK,
+
+	/* PTY (mobule: LBSC) */
+	D7_MARK,	D6_MARK,	D5_MARK,	D4_MARK,
+	D3_MARK,	D2_MARK,	D1_MARK,	D0_MARK,
+	PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+	/* PTA GPIO */
+	PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT),
+	PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT),
+	PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT),
+	PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT),
+	PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT),
+	PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT),
+	PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT),
+	PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT),
+
+	/* PTB GPIO */
+	PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT),
+	PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT),
+	PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT),
+	PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT),
+	PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT),
+	PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT),
+	PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT),
+	PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT),
+
+	/* PTC GPIO */
+	PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT),
+	PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT),
+	PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT),
+	PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT),
+	PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT),
+	PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT),
+	PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT),
+	PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT),
+
+	/* PTD GPIO */
+	PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT),
+	PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT),
+	PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT),
+	PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT),
+	PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT),
+	PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT),
+	PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT),
+	PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT),
+
+	/* PTE GPIO */
+	PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT),
+	PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT),
+	PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT),
+	PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT),
+	PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT),
+	PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT),
+
+	/* PTF GPIO */
+	PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT),
+	PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT),
+	PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT),
+	PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT),
+	PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT),
+	PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT),
+	PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT),
+	PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT),
+
+	/* PTG GPIO */
+	PINMUX_DATA(PTG7_DATA, PTG7_IN, PTG7_OUT),
+	PINMUX_DATA(PTG6_DATA, PTG6_IN, PTG6_OUT),
+	PINMUX_DATA(PTG5_DATA, PTG5_IN, PTG5_OUT),
+	PINMUX_DATA(PTG4_DATA, PTG4_IN, PTG4_OUT),
+	PINMUX_DATA(PTG3_DATA, PTG3_IN, PTG3_OUT),
+	PINMUX_DATA(PTG2_DATA, PTG2_IN, PTG2_OUT),
+	PINMUX_DATA(PTG1_DATA, PTG1_IN, PTG1_OUT),
+	PINMUX_DATA(PTG0_DATA, PTG0_IN, PTG0_OUT),
+
+	/* PTH GPIO */
+	PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT),
+	PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT),
+	PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT),
+	PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT),
+	PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT),
+	PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT),
+	PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT),
+	PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT),
+
+	/* PTI GPIO */
+	PINMUX_DATA(PTI7_DATA, PTI7_IN, PTI7_OUT),
+	PINMUX_DATA(PTI6_DATA, PTI6_IN, PTI6_OUT),
+	PINMUX_DATA(PTI5_DATA, PTI5_IN, PTI5_OUT),
+	PINMUX_DATA(PTI4_DATA, PTI4_IN, PTI4_OUT),
+	PINMUX_DATA(PTI3_DATA, PTI3_IN, PTI3_OUT),
+	PINMUX_DATA(PTI2_DATA, PTI2_IN, PTI2_OUT),
+	PINMUX_DATA(PTI1_DATA, PTI1_IN, PTI1_OUT),
+	PINMUX_DATA(PTI0_DATA, PTI0_IN, PTI0_OUT),
+
+	/* PTJ GPIO */
+	PINMUX_DATA(PTJ7_DATA, PTJ7_IN, PTJ7_OUT),
+	PINMUX_DATA(PTJ6_DATA, PTJ6_IN, PTJ6_OUT),
+	PINMUX_DATA(PTJ5_DATA, PTJ5_IN, PTJ5_OUT),
+	PINMUX_DATA(PTJ4_DATA, PTJ4_IN, PTJ4_OUT),
+	PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT),
+	PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT),
+	PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT),
+	PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT),
+
+	/* PTK GPIO */
+	PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT),
+	PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT),
+	PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT),
+	PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT),
+	PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT),
+	PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT),
+	PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT),
+	PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT),
+
+	/* PTL GPIO */
+	PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT),
+	PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT),
+	PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT),
+	PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT),
+	PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT),
+	PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT),
+	PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT),
+	PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT),
+
+	/* PTM GPIO */
+	PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT),
+	PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT),
+	PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT),
+	PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT),
+	PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT),
+	PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT),
+	PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT),
+
+	/* PTN GPIO */
+	PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT),
+	PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT),
+	PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT),
+	PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT),
+	PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT),
+	PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT),
+	PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT),
+	PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT),
+
+	/* PTO GPIO */
+	PINMUX_DATA(PTO7_DATA, PTO7_IN, PTO7_OUT),
+	PINMUX_DATA(PTO6_DATA, PTO6_IN, PTO6_OUT),
+	PINMUX_DATA(PTO5_DATA, PTO5_IN, PTO5_OUT),
+	PINMUX_DATA(PTO4_DATA, PTO4_IN, PTO4_OUT),
+	PINMUX_DATA(PTO3_DATA, PTO3_IN, PTO3_OUT),
+	PINMUX_DATA(PTO2_DATA, PTO2_IN, PTO2_OUT),
+	PINMUX_DATA(PTO1_DATA, PTO1_IN, PTO1_OUT),
+	PINMUX_DATA(PTO0_DATA, PTO0_IN, PTO0_OUT),
+
+	/* PTQ GPIO */
+	PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT),
+	PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT),
+	PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT),
+	PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT),
+	PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT),
+	PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT),
+	PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT),
+
+	/* PTR GPIO */
+	PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT),
+	PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT),
+	PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT),
+	PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT),
+	PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_OUT),
+	PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_OUT),
+	PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT),
+	PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT),
+
+	/* PTS GPIO */
+	PINMUX_DATA(PTS7_DATA, PTS7_IN, PTS7_OUT),
+	PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT),
+	PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT),
+	PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT),
+	PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT),
+	PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT),
+	PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT),
+	PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT),
+
+	/* PTT GPIO */
+	PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT),
+	PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT),
+	PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT),
+	PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT),
+	PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT),
+	PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT),
+
+	/* PTU GPIO */
+	PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT),
+	PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT),
+	PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT),
+	PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT),
+	PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT),
+	PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT),
+	PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT),
+	PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT),
+
+	/* PTV GPIO */
+	PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT),
+	PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT),
+	PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT),
+	PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT),
+	PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT),
+	PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT),
+	PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT),
+	PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT),
+
+	/* PTW GPIO */
+	PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT),
+	PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT),
+	PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT),
+	PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT),
+	PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT),
+	PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT),
+	PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT),
+	PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT),
+
+	/* PTX GPIO */
+	PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT),
+	PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT),
+	PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT),
+	PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT),
+	PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT),
+	PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT),
+	PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT),
+	PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT),
+
+	/* PTY GPIO */
+	PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT),
+	PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT),
+	PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT),
+	PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT),
+	PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT),
+	PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT),
+	PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT),
+	PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT),
+
+	/* PTZ GPIO */
+	PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT),
+	PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT),
+	PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT),
+	PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT),
+	PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT),
+	PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT),
+	PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT),
+	PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT),
+
+	/* PTA FN */
+	PINMUX_DATA(BS_MARK, PS0_15_FN1, PTA7_FN),
+	PINMUX_DATA(LGPIO7_MARK, PS0_15_FN3, PTA7_FN),
+	PINMUX_DATA(RDWR_MARK, PS0_14_FN1, PTA6_FN),
+	PINMUX_DATA(LGPIO6_MARK, PS0_14_FN3, PTA6_FN),
+	PINMUX_DATA(WE1_MARK, PS0_13_FN1, PTA5_FN),
+	PINMUX_DATA(LGPIO5_MARK, PS0_13_FN3, PTA5_FN),
+	PINMUX_DATA(RDY_MARK, PS0_12_FN1, PTA4_FN),
+	PINMUX_DATA(LGPIO4_MARK, PS0_12_FN3, PTA4_FN),
+	PINMUX_DATA(LGPIO3_MARK, PTA3_FN),
+	PINMUX_DATA(LGPIO2_MARK, PTA2_FN),
+	PINMUX_DATA(LGPIO1_MARK, PTA1_FN),
+	PINMUX_DATA(LGPIO0_MARK, PTA0_FN),
+
+	/* PTB FN */
+	PINMUX_DATA(D15_MARK, PS0_7_FN1, PTB7_FN),
+	PINMUX_DATA(ET0_MDC_MARK, PS0_7_FN2, PTB7_FN),
+	PINMUX_DATA(D14_MARK, PS0_6_FN1, PTB6_FN),
+	PINMUX_DATA(ET0_MDIO_MARK, PS0_6_FN2, PTB6_FN),
+	PINMUX_DATA(D13_MARK, PS0_5_FN1, PTB5_FN),
+	PINMUX_DATA(ET1_MDC_MARK, PS0_5_FN2, PTB5_FN),
+	PINMUX_DATA(D12_MARK, PS0_4_FN1, PTB4_FN),
+	PINMUX_DATA(ET1_MDIO_MARK, PS0_4_FN2, PTB4_FN),
+	PINMUX_DATA(D11_MARK, PS0_3_FN1, PTB3_FN),
+	PINMUX_DATA(SIM_D_MARK, PS0_3_FN2, PTB3_FN),
+	PINMUX_DATA(D10_MARK, PS0_2_FN1, PTB2_FN),
+	PINMUX_DATA(SIM_CLK_MARK, PS0_2_FN2, PTB2_FN),
+	PINMUX_DATA(D9_MARK, PS0_1_FN1, PTB1_FN),
+	PINMUX_DATA(SIM_RST_MARK, PS0_1_FN2, PTB1_FN),
+	PINMUX_DATA(D8_MARK, PTB0_FN),
+
+	/* PTC FN */
+	PINMUX_DATA(SD_WP_MARK, PTC7_FN),
+	PINMUX_DATA(SD_CD_MARK, PTC6_FN),
+	PINMUX_DATA(SD_CLK_MARK, PTC5_FN),
+	PINMUX_DATA(SD_CMD_MARK, PTC4_FN),
+	PINMUX_DATA(SD_D3_MARK, PTC3_FN),
+	PINMUX_DATA(SD_D2_MARK, PTC2_FN),
+	PINMUX_DATA(SD_D1_MARK, PTC1_FN),
+	PINMUX_DATA(SD_D0_MARK, PTC0_FN),
+
+	/* PTD FN */
+	PINMUX_DATA(IRQ7_MARK, PS1_7_FN1, PTD7_FN),
+	PINMUX_DATA(ADTRG1_MARK, PS1_7_FN3, PTD7_FN),
+	PINMUX_DATA(IRQ6_MARK, PS1_6_FN1, PTD6_FN),
+	PINMUX_DATA(ADTRG0_MARK, PS1_6_FN3, PTD6_FN),
+	PINMUX_DATA(IRQ5_MARK, PTD5_FN),
+	PINMUX_DATA(IRQ4_MARK, PTD4_FN),
+	PINMUX_DATA(IRQ3_MARK, PTD3_FN),
+	PINMUX_DATA(IRQ2_MARK, PTD2_FN),
+	PINMUX_DATA(IRQ1_MARK, PTD1_FN),
+	PINMUX_DATA(IRQ0_MARK, PTD0_FN),
+
+	/* PTE FN */
+	PINMUX_DATA(ET0_CRS_DV_MARK, PTE7_FN),
+	PINMUX_DATA(ET0_TXD1_MARK, PTE6_FN),
+	PINMUX_DATA(ET0_TXD0_MARK, PTE5_FN),
+	PINMUX_DATA(ET0_TX_EN_MARK, PTE4_FN),
+	PINMUX_DATA(ET0_REF_CLK_MARK, PTE3_FN),
+	PINMUX_DATA(ET0_RXD1_MARK, PTE2_FN),
+	PINMUX_DATA(ET0_RXD0_MARK, PTE1_FN),
+	PINMUX_DATA(ET0_RX_ER_MARK, PTE0_FN),
+
+	/* PTF FN */
+	PINMUX_DATA(ET1_CRS_DV_MARK, PTF7_FN),
+	PINMUX_DATA(ET1_TXD1_MARK, PTF6_FN),
+	PINMUX_DATA(ET1_TXD0_MARK, PTF5_FN),
+	PINMUX_DATA(ET1_TX_EN_MARK, PTF4_FN),
+	PINMUX_DATA(ET1_REF_CLK_MARK, PTF3_FN),
+	PINMUX_DATA(ET1_RXD1_MARK, PTF2_FN),
+	PINMUX_DATA(ET1_RXD0_MARK, PTF1_FN),
+	PINMUX_DATA(ET1_RX_ER_MARK, PTF0_FN),
+
+	/* PTG FN */
+	PINMUX_DATA(PWX0_MARK, PTG7_FN),
+	PINMUX_DATA(PWX1_MARK, PTG6_FN),
+	PINMUX_DATA(STATUS0_MARK, PS2_13_FN1, PTG5_FN),
+	PINMUX_DATA(PWX2_MARK, PS2_13_FN3, PTG5_FN),
+	PINMUX_DATA(STATUS1_MARK, PS2_12_FN1, PTG4_FN),
+	PINMUX_DATA(PWX3_MARK, PS2_12_FN3, PTG4_FN),
+	PINMUX_DATA(SERIRQ_MARK, PTG3_FN),
+	PINMUX_DATA(CLKRUN_MARK, PTG2_FN),
+	PINMUX_DATA(LPCPD_MARK, PTG1_FN),
+	PINMUX_DATA(LDRQ_MARK, PTG0_FN),
+
+	/* PTH FN */
+	PINMUX_DATA(SP1_MOSI_MARK, PTH7_FN),
+	PINMUX_DATA(SP1_MISO_MARK, PTH6_FN),
+	PINMUX_DATA(SP1_SCK_MARK, PTH5_FN),
+	PINMUX_DATA(SP1_SCK_FB_MARK, PTH4_FN),
+	PINMUX_DATA(SP1_SS0_MARK, PTH3_FN),
+	PINMUX_DATA(TCLK_MARK, PTH2_FN),
+	PINMUX_DATA(RXD4_MARK, PS2_1_FN1, PTH1_FN),
+	PINMUX_DATA(SP1_SS1_MARK, PS2_1_FN2, PTH1_FN),
+	PINMUX_DATA(TXD4_MARK, PS2_0_FN1, PTH0_FN),
+	PINMUX_DATA(SP0_SS1_MARK, PS2_0_FN2, PTH0_FN),
+
+	/* PTI FN */
+	PINMUX_DATA(IRQ15_MARK, PTI7_FN),
+	PINMUX_DATA(IRQ14_MARK, PTI6_FN),
+	PINMUX_DATA(IRQ13_MARK, PTI5_FN),
+	PINMUX_DATA(IRQ12_MARK, PTI4_FN),
+	PINMUX_DATA(IRQ11_MARK, PTI3_FN),
+	PINMUX_DATA(IRQ10_MARK, PTI2_FN),
+	PINMUX_DATA(IRQ9_MARK, PTI1_FN),
+	PINMUX_DATA(IRQ8_MARK, PTI0_FN),
+
+	/* PTJ FN */
+	PINMUX_DATA(RXD3_MARK, PTJ7_FN),
+	PINMUX_DATA(TXD3_MARK, PTJ6_FN),
+	PINMUX_DATA(RXD2_MARK, PTJ5_FN),
+	PINMUX_DATA(TXD2_MARK, PTJ4_FN),
+	PINMUX_DATA(COM1_TXD_MARK, PTJ3_FN),
+	PINMUX_DATA(COM1_RXD_MARK, PTJ2_FN),
+	PINMUX_DATA(COM1_RTS_MARK, PTJ1_FN),
+	PINMUX_DATA(COM1_CTS_MARK, PTJ0_FN),
+
+	/* PTK FN */
+	PINMUX_DATA(COM2_TXD_MARK, PTK7_FN),
+	PINMUX_DATA(COM2_RXD_MARK, PTK6_FN),
+	PINMUX_DATA(COM2_RTS_MARK, PTK5_FN),
+	PINMUX_DATA(COM2_CTS_MARK, PTK4_FN),
+	PINMUX_DATA(COM2_DTR_MARK, PTK3_FN),
+	PINMUX_DATA(COM2_DSR_MARK, PTK2_FN),
+	PINMUX_DATA(COM2_DCD_MARK, PTK1_FN),
+	PINMUX_DATA(COM2_RI_MARK, PTK0_FN),
+
+	/* PTL FN */
+	PINMUX_DATA(RAC_TXD_MARK, PTL7_FN),
+	PINMUX_DATA(RAC_RXD_MARK, PTL6_FN),
+	PINMUX_DATA(RAC_RTS_MARK, PTL5_FN),
+	PINMUX_DATA(RAC_CTS_MARK, PTL4_FN),
+	PINMUX_DATA(RAC_DTR_MARK, PTL3_FN),
+	PINMUX_DATA(RAC_DSR_MARK, PTL2_FN),
+	PINMUX_DATA(RAC_DCD_MARK, PTL1_FN),
+	PINMUX_DATA(RAC_RI_MARK, PTL0_FN),
+
+	/* PTM FN */
+	PINMUX_DATA(WP_MARK, PTM6_FN),
+	PINMUX_DATA(FMS0_MARK, PTM5_FN),
+	PINMUX_DATA(FMS1_MARK, PTM4_FN),
+	PINMUX_DATA(SDA6_MARK, PTM3_FN),
+	PINMUX_DATA(SCL6_MARK, PTM2_FN),
+	PINMUX_DATA(SDA7_MARK, PTM1_FN),
+	PINMUX_DATA(SCL7_MARK, PTM0_FN),
+
+	/* PTN FN */
+	PINMUX_DATA(SCK2_MARK, PS4_15_FN1, PTN7_FN),
+	PINMUX_DATA(EVENT7_MARK, PS4_15_FN2, PTN7_FN),
+	PINMUX_DATA(RTS4_MARK, PS4_14_FN1, PTN6_FN),
+	PINMUX_DATA(EVENT6_MARK, PS4_14_FN2, PTN6_FN),
+	PINMUX_DATA(RTS3_MARK, PS4_13_FN1, PTN5_FN),
+	PINMUX_DATA(EVENT5_MARK, PS4_13_FN2, PTN5_FN),
+	PINMUX_DATA(RTS2_MARK, PS4_12_FN1, PTN4_FN),
+	PINMUX_DATA(EVENT4_MARK, PS4_12_FN2, PTN4_FN),
+	PINMUX_DATA(CTS4_MARK, PS4_11_FN1, PTN3_FN),
+	PINMUX_DATA(EVENT3_MARK, PS4_11_FN2, PTN3_FN),
+	PINMUX_DATA(CTS3_MARK, PS4_10_FN1, PTN2_FN),
+	PINMUX_DATA(EVENT2_MARK, PS4_10_FN2, PTN2_FN),
+	PINMUX_DATA(CTS2_MARK, PS4_9_FN1, PTN1_FN),
+	PINMUX_DATA(EVENT1_MARK, PS4_9_FN2, PTN1_FN),
+	PINMUX_DATA(EVENT0_MARK, PTN0_FN),
+
+	/* PTO FN */
+	PINMUX_DATA(SGPIO0_CLK_MARK, PTO7_FN),
+	PINMUX_DATA(SGPIO0_LOAD_MARK, PTO6_FN),
+	PINMUX_DATA(SGPIO0_DI_MARK, PTO5_FN),
+	PINMUX_DATA(SGPIO0_DO_MARK, PTO4_FN),
+	PINMUX_DATA(SGPIO1_CLK_MARK, PTO3_FN),
+	PINMUX_DATA(SGPIO1_LOAD_MARK, PTO2_FN),
+	PINMUX_DATA(SGPIO1_DI_MARK, PTO1_FN),
+	PINMUX_DATA(SGPIO1_DO_MARK, PTO0_FN),
+
+	/* PTP FN */
+	PINMUX_DATA(JMCTCK_MARK, PTP6_FN),
+	PINMUX_DATA(JMCTMS_MARK, PTP5_FN),
+	PINMUX_DATA(JMCTDO_MARK, PTP4_FN),
+	PINMUX_DATA(JMCTDI_MARK, PTP3_FN),
+	PINMUX_DATA(JMCRST_MARK, PTP2_FN),
+	PINMUX_DATA(SCK4_MARK, PTP1_FN),
+	PINMUX_DATA(SCK3_MARK, PTP0_FN),
+
+	/* PTQ FN */
+	PINMUX_DATA(LAD3_MARK, PTQ6_FN),
+	PINMUX_DATA(LAD2_MARK, PTQ5_FN),
+	PINMUX_DATA(LAD1_MARK, PTQ4_FN),
+	PINMUX_DATA(LAD0_MARK, PTQ3_FN),
+	PINMUX_DATA(LFRAME_MARK, PTQ2_FN),
+	PINMUX_DATA(SCK4_MARK, PTQ1_FN),
+	PINMUX_DATA(SCK3_MARK, PTQ0_FN),
+
+	/* PTR FN */
+	PINMUX_DATA(SDA8_MARK, PTR7_FN),	/* DDC3? */
+	PINMUX_DATA(SCL8_MARK, PTR6_FN),	/* DDC2? */
+	PINMUX_DATA(SDA2_MARK, PTR5_FN),
+	PINMUX_DATA(SCL2_MARK, PTR4_FN),
+	PINMUX_DATA(SDA1_MARK, PTR3_FN),
+	PINMUX_DATA(SCL1_MARK, PTR2_FN),
+	PINMUX_DATA(SDA0_MARK, PTR1_FN),
+	PINMUX_DATA(SCL0_MARK, PTR0_FN),
+
+	/* PTS FN */
+	PINMUX_DATA(SDA9_MARK, PTS7_FN),	/* DDC1? */
+	PINMUX_DATA(SCL9_MARK, PTS6_FN),	/* DDC0? */
+	PINMUX_DATA(SDA5_MARK, PTS5_FN),
+	PINMUX_DATA(SCL5_MARK, PTS4_FN),
+	PINMUX_DATA(SDA4_MARK, PTS3_FN),
+	PINMUX_DATA(SCL4_MARK, PTS2_FN),
+	PINMUX_DATA(SDA3_MARK, PTS1_FN),
+	PINMUX_DATA(SCL3_MARK, PTS0_FN),
+
+	/* PTT FN */
+	PINMUX_DATA(AUDSYNC_MARK, PTS5_FN),
+	PINMUX_DATA(AUDCK_MARK, PTS4_FN),
+	PINMUX_DATA(AUDATA3_MARK, PS4_3_FN1, PTS3_FN),
+	PINMUX_DATA(PWX7_MARK, PS4_3_FN2, PTS3_FN),
+	PINMUX_DATA(AUDATA2_MARK, PS4_2_FN1, PTS2_FN),
+	PINMUX_DATA(PWX6_MARK, PS4_2_FN2, PTS2_FN),
+	PINMUX_DATA(AUDATA1_MARK, PS4_1_FN1, PTS1_FN),
+	PINMUX_DATA(PWX5_MARK, PS4_1_FN2, PTS1_FN),
+	PINMUX_DATA(AUDATA0_MARK, PS4_0_FN1, PTS0_FN),
+	PINMUX_DATA(PWX4_MARK, PS4_0_FN2, PTS0_FN),
+
+	/* PTU FN */
+	PINMUX_DATA(CS6_MARK, PTU7_FN),
+	PINMUX_DATA(CS5_MARK, PTU6_FN),
+	PINMUX_DATA(CS4_MARK, PTU5_FN),
+	PINMUX_DATA(CS0_MARK, PTU4_FN),
+	PINMUX_DATA(RD_MARK, PTU3_FN),
+	PINMUX_DATA(WE0_MARK, PTU2_FN),
+	PINMUX_DATA(A25_MARK, PS5_9_FN1, PTU1_FN),
+	PINMUX_DATA(DREQ0_MARK, PS5_9_FN2, PTU1_FN),
+	PINMUX_DATA(A24_MARK, PS5_8_FN1, PTU0_FN),
+	PINMUX_DATA(DACK0_MARK, PS5_8_FN2, PTU0_FN),
+
+	/* PTV FN */
+	PINMUX_DATA(A23_MARK, PS5_7_FN1, PTV7_FN),
+	PINMUX_DATA(TEND0_MARK, PS5_7_FN2, PTV7_FN),
+	PINMUX_DATA(A22_MARK, PS5_6_FN1, PTV6_FN),
+	PINMUX_DATA(DREQ1_MARK, PS5_6_FN2, PTV6_FN),
+	PINMUX_DATA(A21_MARK, PS5_5_FN1, PTV5_FN),
+	PINMUX_DATA(DACK1_MARK, PS5_5_FN2, PTV5_FN),
+	PINMUX_DATA(A20_MARK, PS5_4_FN1, PTV4_FN),
+	PINMUX_DATA(TEND1_MARK, PS5_4_FN2, PTV4_FN),
+	PINMUX_DATA(A19_MARK, PTV3_FN),
+	PINMUX_DATA(A18_MARK, PTV2_FN),
+	PINMUX_DATA(A17_MARK, PTV1_FN),
+	PINMUX_DATA(A16_MARK, PTV0_FN),
+
+	/* PTW FN */
+	PINMUX_DATA(A15_MARK, PTW7_FN),
+	PINMUX_DATA(A14_MARK, PTW6_FN),
+	PINMUX_DATA(A13_MARK, PTW5_FN),
+	PINMUX_DATA(A12_MARK, PTW4_FN),
+	PINMUX_DATA(A11_MARK, PTW3_FN),
+	PINMUX_DATA(A10_MARK, PTW2_FN),
+	PINMUX_DATA(A9_MARK, PTW1_FN),
+	PINMUX_DATA(A8_MARK, PTW0_FN),
+
+	/* PTX FN */
+	PINMUX_DATA(A7_MARK, PTX7_FN),
+	PINMUX_DATA(A6_MARK, PTX6_FN),
+	PINMUX_DATA(A5_MARK, PTX5_FN),
+	PINMUX_DATA(A4_MARK, PTX4_FN),
+	PINMUX_DATA(A3_MARK, PTX3_FN),
+	PINMUX_DATA(A2_MARK, PTX2_FN),
+	PINMUX_DATA(A1_MARK, PTX1_FN),
+	PINMUX_DATA(A0_MARK, PTX0_FN),
+
+	/* PTY FN */
+	PINMUX_DATA(D7_MARK, PTY7_FN),
+	PINMUX_DATA(D6_MARK, PTY6_FN),
+	PINMUX_DATA(D5_MARK, PTY5_FN),
+	PINMUX_DATA(D4_MARK, PTY4_FN),
+	PINMUX_DATA(D3_MARK, PTY3_FN),
+	PINMUX_DATA(D2_MARK, PTY2_FN),
+	PINMUX_DATA(D1_MARK, PTY1_FN),
+	PINMUX_DATA(D0_MARK, PTY0_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	/* PTA */
+	PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+	PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+	PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+	PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+	PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+	PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+	PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+	PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+	/* PTB */
+	PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+	PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+	PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+	PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+	PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+	PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+	PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+	PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+	/* PTC */
+	PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+	PINMUX_GPIO(GPIO_PTC6, PTC6_DATA),
+	PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+	PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+	PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+	PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+	PINMUX_GPIO(GPIO_PTC1, PTC1_DATA),
+	PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+	/* PTD */
+	PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+	PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+	PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+	PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+	PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+	PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+	PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+	PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+	/* PTE */
+	PINMUX_GPIO(GPIO_PTE7, PTE7_DATA),
+	PINMUX_GPIO(GPIO_PTE6, PTE6_DATA),
+	PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+	PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+	PINMUX_GPIO(GPIO_PTE3, PTE3_DATA),
+	PINMUX_GPIO(GPIO_PTE2, PTE2_DATA),
+	PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+	PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+	/* PTF */
+	PINMUX_GPIO(GPIO_PTF7, PTF7_DATA),
+	PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+	PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+	PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+	PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+	PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+	PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+	PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+	/* PTG */
+	PINMUX_GPIO(GPIO_PTG7, PTG7_DATA),
+	PINMUX_GPIO(GPIO_PTG6, PTG6_DATA),
+	PINMUX_GPIO(GPIO_PTG5, PTG5_DATA),
+	PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+	PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+	PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+	PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+	PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+	/* PTH */
+	PINMUX_GPIO(GPIO_PTH7, PTH7_DATA),
+	PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+	PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+	PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+	PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+	PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+	PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+	PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+	/* PTI */
+	PINMUX_GPIO(GPIO_PTI7, PTI7_DATA),
+	PINMUX_GPIO(GPIO_PTI6, PTI6_DATA),
+	PINMUX_GPIO(GPIO_PTI5, PTI5_DATA),
+	PINMUX_GPIO(GPIO_PTI4, PTI4_DATA),
+	PINMUX_GPIO(GPIO_PTI3, PTI3_DATA),
+	PINMUX_GPIO(GPIO_PTI2, PTI2_DATA),
+	PINMUX_GPIO(GPIO_PTI1, PTI1_DATA),
+	PINMUX_GPIO(GPIO_PTI0, PTI0_DATA),
+
+	/* PTJ */
+	PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA),
+	PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA),
+	PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+	PINMUX_GPIO(GPIO_PTJ4, PTJ4_DATA),
+	PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA),
+	PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA),
+	PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+	PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+	/* PTK */
+	PINMUX_GPIO(GPIO_PTK7, PTK7_DATA),
+	PINMUX_GPIO(GPIO_PTK6, PTK6_DATA),
+	PINMUX_GPIO(GPIO_PTK5, PTK5_DATA),
+	PINMUX_GPIO(GPIO_PTK4, PTK4_DATA),
+	PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+	PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+	PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+	PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+	/* PTL */
+	PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+	PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+	PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+	PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+	PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+	PINMUX_GPIO(GPIO_PTL2, PTL2_DATA),
+	PINMUX_GPIO(GPIO_PTL1, PTL1_DATA),
+	PINMUX_GPIO(GPIO_PTL0, PTL0_DATA),
+
+	/* PTM */
+	PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+	PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+	PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+	PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+	PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+	PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+	PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+	/* PTN */
+	PINMUX_GPIO(GPIO_PTN7, PTN7_DATA),
+	PINMUX_GPIO(GPIO_PTN6, PTN6_DATA),
+	PINMUX_GPIO(GPIO_PTN5, PTN5_DATA),
+	PINMUX_GPIO(GPIO_PTN4, PTN4_DATA),
+	PINMUX_GPIO(GPIO_PTN3, PTN3_DATA),
+	PINMUX_GPIO(GPIO_PTN2, PTN2_DATA),
+	PINMUX_GPIO(GPIO_PTN1, PTN1_DATA),
+	PINMUX_GPIO(GPIO_PTN0, PTN0_DATA),
+
+	/* PTO */
+	PINMUX_GPIO(GPIO_PTO7, PTO7_DATA),
+	PINMUX_GPIO(GPIO_PTO6, PTO6_DATA),
+	PINMUX_GPIO(GPIO_PTO5, PTO5_DATA),
+	PINMUX_GPIO(GPIO_PTO4, PTO4_DATA),
+	PINMUX_GPIO(GPIO_PTO3, PTO3_DATA),
+	PINMUX_GPIO(GPIO_PTO2, PTO2_DATA),
+	PINMUX_GPIO(GPIO_PTO1, PTO1_DATA),
+	PINMUX_GPIO(GPIO_PTO0, PTO0_DATA),
+
+	/* PTP */
+	PINMUX_GPIO(GPIO_PTP6, PTP6_DATA),
+	PINMUX_GPIO(GPIO_PTP5, PTP5_DATA),
+	PINMUX_GPIO(GPIO_PTP4, PTP4_DATA),
+	PINMUX_GPIO(GPIO_PTP3, PTP3_DATA),
+	PINMUX_GPIO(GPIO_PTP2, PTP2_DATA),
+	PINMUX_GPIO(GPIO_PTP1, PTP1_DATA),
+	PINMUX_GPIO(GPIO_PTP0, PTP0_DATA),
+
+	/* PTQ */
+	PINMUX_GPIO(GPIO_PTQ6, PTQ6_DATA),
+	PINMUX_GPIO(GPIO_PTQ5, PTQ5_DATA),
+	PINMUX_GPIO(GPIO_PTQ4, PTQ4_DATA),
+	PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA),
+	PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA),
+	PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA),
+	PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA),
+
+	/* PTR */
+	PINMUX_GPIO(GPIO_PTR7, PTR7_DATA),
+	PINMUX_GPIO(GPIO_PTR6, PTR6_DATA),
+	PINMUX_GPIO(GPIO_PTR5, PTR5_DATA),
+	PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+	PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+	PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+	PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+	PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+	/* PTS */
+	PINMUX_GPIO(GPIO_PTS7, PTS7_DATA),
+	PINMUX_GPIO(GPIO_PTS6, PTS6_DATA),
+	PINMUX_GPIO(GPIO_PTS5, PTS5_DATA),
+	PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+	PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+	PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+	PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+	PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+	/* PTT */
+	PINMUX_GPIO(GPIO_PTT5, PTT5_DATA),
+	PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+	PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+	PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+	PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+	PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+	/* PTU */
+	PINMUX_GPIO(GPIO_PTU7, PTU7_DATA),
+	PINMUX_GPIO(GPIO_PTU6, PTU6_DATA),
+	PINMUX_GPIO(GPIO_PTU5, PTU5_DATA),
+	PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+	PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+	PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+	PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+	PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+	/* PTV */
+	PINMUX_GPIO(GPIO_PTV7, PTV7_DATA),
+	PINMUX_GPIO(GPIO_PTV6, PTV6_DATA),
+	PINMUX_GPIO(GPIO_PTV5, PTV5_DATA),
+	PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+	PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+	PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+	PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+	PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+	/* PTW */
+	PINMUX_GPIO(GPIO_PTW7, PTW7_DATA),
+	PINMUX_GPIO(GPIO_PTW6, PTW6_DATA),
+	PINMUX_GPIO(GPIO_PTW5, PTW5_DATA),
+	PINMUX_GPIO(GPIO_PTW4, PTW4_DATA),
+	PINMUX_GPIO(GPIO_PTW3, PTW3_DATA),
+	PINMUX_GPIO(GPIO_PTW2, PTW2_DATA),
+	PINMUX_GPIO(GPIO_PTW1, PTW1_DATA),
+	PINMUX_GPIO(GPIO_PTW0, PTW0_DATA),
+
+	/* PTX */
+	PINMUX_GPIO(GPIO_PTX7, PTX7_DATA),
+	PINMUX_GPIO(GPIO_PTX6, PTX6_DATA),
+	PINMUX_GPIO(GPIO_PTX5, PTX5_DATA),
+	PINMUX_GPIO(GPIO_PTX4, PTX4_DATA),
+	PINMUX_GPIO(GPIO_PTX3, PTX3_DATA),
+	PINMUX_GPIO(GPIO_PTX2, PTX2_DATA),
+	PINMUX_GPIO(GPIO_PTX1, PTX1_DATA),
+	PINMUX_GPIO(GPIO_PTX0, PTX0_DATA),
+
+	/* PTY */
+	PINMUX_GPIO(GPIO_PTY7, PTY7_DATA),
+	PINMUX_GPIO(GPIO_PTY6, PTY6_DATA),
+	PINMUX_GPIO(GPIO_PTY5, PTY5_DATA),
+	PINMUX_GPIO(GPIO_PTY4, PTY4_DATA),
+	PINMUX_GPIO(GPIO_PTY3, PTY3_DATA),
+	PINMUX_GPIO(GPIO_PTY2, PTY2_DATA),
+	PINMUX_GPIO(GPIO_PTY1, PTY1_DATA),
+	PINMUX_GPIO(GPIO_PTY0, PTY0_DATA),
+
+	/* PTZ */
+	PINMUX_GPIO(GPIO_PTZ7, PTZ7_DATA),
+	PINMUX_GPIO(GPIO_PTZ6, PTZ6_DATA),
+	PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA),
+	PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA),
+	PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA),
+	PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA),
+	PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA),
+	PINMUX_GPIO(GPIO_PTZ0, PTZ0_DATA),
+
+	/* PTA (mobule: LBSC, CPG, LPC) */
+	PINMUX_GPIO(GPIO_FN_BS, BS_MARK),
+	PINMUX_GPIO(GPIO_FN_RDWR, RDWR_MARK),
+	PINMUX_GPIO(GPIO_FN_WE1, WE1_MARK),
+	PINMUX_GPIO(GPIO_FN_RDY, RDY_MARK),
+	PINMUX_GPIO(GPIO_FN_MD10, MD10_MARK),
+	PINMUX_GPIO(GPIO_FN_MD9, MD9_MARK),
+	PINMUX_GPIO(GPIO_FN_MD8, MD8_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO7, LGPIO7_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO6, LGPIO6_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO5, LGPIO5_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO4, LGPIO4_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO3, LGPIO3_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO2, LGPIO2_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO1, LGPIO1_MARK),
+	PINMUX_GPIO(GPIO_FN_LGPIO0, LGPIO0_MARK),
+
+	/* PTB (mobule: LBSC, EtherC, SIM, LPC) */
+	PINMUX_GPIO(GPIO_FN_D15, D15_MARK),
+	PINMUX_GPIO(GPIO_FN_D14, D14_MARK),
+	PINMUX_GPIO(GPIO_FN_D13, D13_MARK),
+	PINMUX_GPIO(GPIO_FN_D12, D12_MARK),
+	PINMUX_GPIO(GPIO_FN_D11, D11_MARK),
+	PINMUX_GPIO(GPIO_FN_D10, D10_MARK),
+	PINMUX_GPIO(GPIO_FN_D9, D9_MARK),
+	PINMUX_GPIO(GPIO_FN_D8, D8_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_MDC, ET0_MDC_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_MDIO, ET0_MDIO_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_MDC, ET1_MDC_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_MDIO, ET1_MDIO_MARK),
+	PINMUX_GPIO(GPIO_FN_WPSZ1, WPSZ1_MARK),
+	PINMUX_GPIO(GPIO_FN_WPSZ0, WPSZ0_MARK),
+	PINMUX_GPIO(GPIO_FN_FWID, FWID_MARK),
+	PINMUX_GPIO(GPIO_FN_FLSHSZ, FLSHSZ_MARK),
+	PINMUX_GPIO(GPIO_FN_LPC_SPIEN, LPC_SPIEN_MARK),
+	PINMUX_GPIO(GPIO_FN_BASEL, BASEL_MARK),
+
+	/* PTC (mobule: SD) */
+	PINMUX_GPIO(GPIO_FN_SD_WP, SD_WP_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_CD, SD_CD_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_CLK, SD_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_CMD, SD_CMD_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D3, SD_D3_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D2, SD_D2_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D1, SD_D1_MARK),
+	PINMUX_GPIO(GPIO_FN_SD_D0, SD_D0_MARK),
+
+	/* PTD (mobule: INTC, SPI0, LBSC, CPG, ADC) */
+	PINMUX_GPIO(GPIO_FN_IRQ7, IRQ7_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ6, IRQ6_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ5, IRQ5_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ4, IRQ4_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ3, IRQ3_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ2, IRQ2_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ1, IRQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ0, IRQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_MD6, MD6_MARK),
+	PINMUX_GPIO(GPIO_FN_MD5, MD5_MARK),
+	PINMUX_GPIO(GPIO_FN_MD3, MD3_MARK),
+	PINMUX_GPIO(GPIO_FN_MD2, MD2_MARK),
+	PINMUX_GPIO(GPIO_FN_MD1, MD1_MARK),
+	PINMUX_GPIO(GPIO_FN_MD0, MD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ADTRG1, ADTRG1_MARK),
+	PINMUX_GPIO(GPIO_FN_ADTRG0, ADTRG0_MARK),
+
+	/* PTE (mobule: EtherC) */
+	PINMUX_GPIO(GPIO_FN_ET0_CRS_DV, ET0_CRS_DV_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_TXD1, ET0_TXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_TXD0, ET0_TXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_TX_EN, ET0_TX_EN_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_REF_CLK, ET0_REF_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_RXD1, ET0_RXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_RXD0, ET0_RXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET0_RX_ER, ET0_RX_ER_MARK),
+
+	/* PTF (mobule: EtherC) */
+	PINMUX_GPIO(GPIO_FN_ET1_CRS_DV, ET1_CRS_DV_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_TXD1, ET1_TXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_TXD0, ET1_TXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_TX_EN, ET1_TX_EN_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_REF_CLK, ET1_REF_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_RXD1, ET1_RXD1_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_RXD0, ET1_RXD0_MARK),
+	PINMUX_GPIO(GPIO_FN_ET1_RX_ER, ET1_RX_ER_MARK),
+
+	/* PTG (mobule: SYSTEM, PWMX, LPC) */
+	PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+	PINMUX_GPIO(GPIO_FN_STATUS1, STATUS1_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX0, PWX0_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX1, PWX1_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX2, PWX2_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX3, PWX3_MARK),
+	PINMUX_GPIO(GPIO_FN_SERIRQ, SERIRQ_MARK),
+	PINMUX_GPIO(GPIO_FN_CLKRUN, CLKRUN_MARK),
+	PINMUX_GPIO(GPIO_FN_LPCPD, LPCPD_MARK),
+	PINMUX_GPIO(GPIO_FN_LDRQ, LDRQ_MARK),
+
+	/* PTH (mobule: TMU, SCIF234, SPI1, SPI0) */
+	PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD4, RXD4_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD4, TXD4_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_MOSI, SP1_MOSI_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_MISO, SP1_MISO_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SCK, SP1_SCK_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SCK_FB, SP1_SCK_FB_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SS0, SP1_SS0_MARK),
+	PINMUX_GPIO(GPIO_FN_SP1_SS1, SP1_SS1_MARK),
+	PINMUX_GPIO(GPIO_FN_SP0_SS1, SP0_SS1_MARK),
+
+	/* PTI (mobule: INTC) */
+	PINMUX_GPIO(GPIO_FN_IRQ15, IRQ15_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ14, IRQ14_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ13, IRQ13_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ12, IRQ12_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ11, IRQ11_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ10, IRQ10_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ9, IRQ9_MARK),
+	PINMUX_GPIO(GPIO_FN_IRQ8, IRQ8_MARK),
+
+	/* PTJ (mobule: SCIF234, SERMUX) */
+	PINMUX_GPIO(GPIO_FN_RXD3, RXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD3, TXD3_MARK),
+	PINMUX_GPIO(GPIO_FN_RXD2, RXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_TXD2, TXD2_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_TXD, COM1_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_RXD, COM1_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_RTS, COM1_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_COM1_CTS, COM1_CTS_MARK),
+
+	/* PTK (mobule: SERMUX) */
+	PINMUX_GPIO(GPIO_FN_COM2_TXD, COM2_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_RXD, COM2_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_RTS, COM2_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_CTS, COM2_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_DTR, COM2_DTR_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_DSR, COM2_DSR_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_DCD, COM2_DCD_MARK),
+	PINMUX_GPIO(GPIO_FN_COM2_RI, COM2_RI_MARK),
+
+	/* PTL (mobule: SERMUX) */
+	PINMUX_GPIO(GPIO_FN_RAC_TXD, RAC_TXD_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_RXD, RAC_RXD_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_RTS, RAC_RTS_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_CTS, RAC_CTS_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_DTR, RAC_DTR_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_DSR, RAC_DSR_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_DCD, RAC_DCD_MARK),
+	PINMUX_GPIO(GPIO_FN_RAC_RI, RAC_RI_MARK),
+
+	/* PTM (mobule: IIC, LPC) */
+	PINMUX_GPIO(GPIO_FN_SDA6, SDA6_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL6, SCL6_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA7, SDA7_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL7, SCL7_MARK),
+	PINMUX_GPIO(GPIO_FN_WP, WP_MARK),
+	PINMUX_GPIO(GPIO_FN_FMS0, FMS0_MARK),
+	PINMUX_GPIO(GPIO_FN_FMS1, FMS1_MARK),
+
+	/* PTN (mobule: SCIF234, EVC) */
+	PINMUX_GPIO(GPIO_FN_SCK2, SCK2_MARK),
+	PINMUX_GPIO(GPIO_FN_RTS4, RTS4_MARK),
+	PINMUX_GPIO(GPIO_FN_RTS3, RTS3_MARK),
+	PINMUX_GPIO(GPIO_FN_RTS2, RTS2_MARK),
+	PINMUX_GPIO(GPIO_FN_CTS4, CTS4_MARK),
+	PINMUX_GPIO(GPIO_FN_CTS3, CTS3_MARK),
+	PINMUX_GPIO(GPIO_FN_CTS2, CTS2_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT7, EVENT7_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT6, EVENT6_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT5, EVENT5_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT4, EVENT4_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT3, EVENT3_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT2, EVENT2_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT1, EVENT1_MARK),
+	PINMUX_GPIO(GPIO_FN_EVENT0, EVENT0_MARK),
+
+	/* PTO (mobule: SGPIO) */
+	PINMUX_GPIO(GPIO_FN_SGPIO0_CLK, SGPIO0_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO0_LOAD, SGPIO0_LOAD_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO0_DI, SGPIO0_DI_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO0_DO, SGPIO0_DO_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_CLK, SGPIO1_CLK_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_LOAD, SGPIO1_LOAD_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_DI, SGPIO1_DI_MARK),
+	PINMUX_GPIO(GPIO_FN_SGPIO1_DO, SGPIO1_DO_MARK),
+
+	/* PTP (mobule: JMC, SCIF234) */
+	PINMUX_GPIO(GPIO_FN_JMCTCK, JMCTCK_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCTMS, JMCTMS_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCTDO, JMCTDO_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCTDI, JMCTDI_MARK),
+	PINMUX_GPIO(GPIO_FN_JMCRST, JMCRST_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK4, SCK4_MARK),
+	PINMUX_GPIO(GPIO_FN_SCK3, SCK3_MARK),
+
+	/* PTQ (mobule: LPC) */
+	PINMUX_GPIO(GPIO_FN_LAD3, LAD3_MARK),
+	PINMUX_GPIO(GPIO_FN_LAD2, LAD2_MARK),
+	PINMUX_GPIO(GPIO_FN_LAD1, LAD1_MARK),
+	PINMUX_GPIO(GPIO_FN_LAD0, LAD0_MARK),
+	PINMUX_GPIO(GPIO_FN_LFRAME, LFRAME_MARK),
+	PINMUX_GPIO(GPIO_FN_LRESET, LRESET_MARK),
+	PINMUX_GPIO(GPIO_FN_LCLK, LCLK_MARK),
+
+	/* PTR (mobule: GRA, IIC) */
+	PINMUX_GPIO(GPIO_FN_DDC3, DDC3_MARK),
+	PINMUX_GPIO(GPIO_FN_DDC2, DDC2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA8, SDA8_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL8, SCL8_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA2, SDA2_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL2, SCL2_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA1, SDA1_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL1, SCL1_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA0, SDA0_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL0, SCL0_MARK),
+
+	/* PTS (mobule: GRA, IIC) */
+	PINMUX_GPIO(GPIO_FN_DDC1, DDC1_MARK),
+	PINMUX_GPIO(GPIO_FN_DDC0, DDC0_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA9, SDA9_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL9, SCL9_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA5, SDA5_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL5, SCL5_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA4, SDA4_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL4, SCL4_MARK),
+	PINMUX_GPIO(GPIO_FN_SDA3, SDA3_MARK),
+	PINMUX_GPIO(GPIO_FN_SCL3, SCL3_MARK),
+
+	/* PTT (mobule: SYSTEM, PWMX) */
+	PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDCK, AUDCK_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK),
+	PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX7, PWX7_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX6, PWX6_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX5, PWX5_MARK),
+	PINMUX_GPIO(GPIO_FN_PWX4, PWX4_MARK),
+
+	/* PTU (mobule: LBSC, DMAC) */
+	PINMUX_GPIO(GPIO_FN_CS6, CS6_MARK),
+	PINMUX_GPIO(GPIO_FN_CS5, CS5_MARK),
+	PINMUX_GPIO(GPIO_FN_CS4, CS4_MARK),
+	PINMUX_GPIO(GPIO_FN_CS0, CS0_MARK),
+	PINMUX_GPIO(GPIO_FN_RD, RD_MARK),
+	PINMUX_GPIO(GPIO_FN_WE0, WE0_MARK),
+	PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+	PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK0, DACK0_MARK),
+
+	/* PTV (mobule: LBSC, DMAC) */
+	PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+	PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+	PINMUX_GPIO(GPIO_FN_A21, A21_MARK),
+	PINMUX_GPIO(GPIO_FN_A20, A20_MARK),
+	PINMUX_GPIO(GPIO_FN_A19, A19_MARK),
+	PINMUX_GPIO(GPIO_FN_A18, A18_MARK),
+	PINMUX_GPIO(GPIO_FN_A17, A17_MARK),
+	PINMUX_GPIO(GPIO_FN_A16, A16_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND0, TEND0_MARK),
+	PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK),
+	PINMUX_GPIO(GPIO_FN_DACK1, DACK1_MARK),
+	PINMUX_GPIO(GPIO_FN_TEND1, TEND1_MARK),
+
+	/* PTW (mobule: LBSC) */
+	PINMUX_GPIO(GPIO_FN_A16, A16_MARK),
+	PINMUX_GPIO(GPIO_FN_A15, A15_MARK),
+	PINMUX_GPIO(GPIO_FN_A14, A14_MARK),
+	PINMUX_GPIO(GPIO_FN_A13, A13_MARK),
+	PINMUX_GPIO(GPIO_FN_A12, A12_MARK),
+	PINMUX_GPIO(GPIO_FN_A11, A11_MARK),
+	PINMUX_GPIO(GPIO_FN_A10, A10_MARK),
+	PINMUX_GPIO(GPIO_FN_A9, A9_MARK),
+	PINMUX_GPIO(GPIO_FN_A8, A8_MARK),
+
+	/* PTX (mobule: LBSC) */
+	PINMUX_GPIO(GPIO_FN_A7, A7_MARK),
+	PINMUX_GPIO(GPIO_FN_A6, A6_MARK),
+	PINMUX_GPIO(GPIO_FN_A5, A5_MARK),
+	PINMUX_GPIO(GPIO_FN_A4, A4_MARK),
+	PINMUX_GPIO(GPIO_FN_A3, A3_MARK),
+	PINMUX_GPIO(GPIO_FN_A2, A2_MARK),
+	PINMUX_GPIO(GPIO_FN_A1, A1_MARK),
+	PINMUX_GPIO(GPIO_FN_A0, A0_MARK),
+
+	/* PTY (mobule: LBSC) */
+	PINMUX_GPIO(GPIO_FN_D7, D7_MARK),
+	PINMUX_GPIO(GPIO_FN_D6, D6_MARK),
+	PINMUX_GPIO(GPIO_FN_D5, D5_MARK),
+	PINMUX_GPIO(GPIO_FN_D4, D4_MARK),
+	PINMUX_GPIO(GPIO_FN_D3, D3_MARK),
+	PINMUX_GPIO(GPIO_FN_D2, D2_MARK),
+	PINMUX_GPIO(GPIO_FN_D1, D1_MARK),
+	PINMUX_GPIO(GPIO_FN_D0, D0_MARK),
+ };
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	{ PINMUX_CFG_REG("PACR", 0xffec0000, 16, 2) {
+		PTA7_FN, PTA7_OUT, PTA7_IN, 0,
+		PTA6_FN, PTA6_OUT, PTA6_IN, 0,
+		PTA5_FN, PTA5_OUT, PTA5_IN, 0,
+		PTA4_FN, PTA4_OUT, PTA4_IN, 0,
+		PTA3_FN, PTA3_OUT, PTA3_IN, 0,
+		PTA2_FN, PTA2_OUT, PTA2_IN, 0,
+		PTA1_FN, PTA1_OUT, PTA1_IN, 0,
+		PTA0_FN, PTA0_OUT, PTA0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PBCR", 0xffec0002, 16, 2) {
+		PTB7_FN, PTB7_OUT, PTB7_IN, 0,
+		PTB6_FN, PTB6_OUT, PTB6_IN, 0,
+		PTB5_FN, PTB5_OUT, PTB5_IN, 0,
+		PTB4_FN, PTB4_OUT, PTB4_IN, 0,
+		PTB3_FN, PTB3_OUT, PTB3_IN, 0,
+		PTB2_FN, PTB2_OUT, PTB2_IN, 0,
+		PTB1_FN, PTB1_OUT, PTB1_IN, 0,
+		PTB0_FN, PTB0_OUT, PTB0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PCCR", 0xffec0004, 16, 2) {
+		PTC7_FN, PTC7_OUT, PTC7_IN, 0,
+		PTC6_FN, PTC6_OUT, PTC6_IN, 0,
+		PTC5_FN, PTC5_OUT, PTC5_IN, 0,
+		PTC4_FN, PTC4_OUT, PTC4_IN, 0,
+		PTC3_FN, PTC3_OUT, PTC3_IN, 0,
+		PTC2_FN, PTC2_OUT, PTC2_IN, 0,
+		PTC1_FN, PTC1_OUT, PTC1_IN, 0,
+		PTC0_FN, PTC0_OUT, PTC0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PDCR", 0xffec0006, 16, 2) {
+		PTD7_FN, PTD7_OUT, PTD7_IN, 0,
+		PTD6_FN, PTD6_OUT, PTD6_IN, 0,
+		PTD5_FN, PTD5_OUT, PTD5_IN, 0,
+		PTD4_FN, PTD4_OUT, PTD4_IN, 0,
+		PTD3_FN, PTD3_OUT, PTD3_IN, 0,
+		PTD2_FN, PTD2_OUT, PTD2_IN, 0,
+		PTD1_FN, PTD1_OUT, PTD1_IN, 0,
+		PTD0_FN, PTD0_OUT, PTD0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PECR", 0xffec0008, 16, 2) {
+		PTE7_FN, PTE7_OUT, PTE7_IN, 0,
+		PTE6_FN, PTE6_OUT, PTE6_IN, 0,
+		PTE5_FN, PTE5_OUT, PTE5_IN, 0,
+		PTE4_FN, PTE4_OUT, PTE4_IN, 0,
+		PTE3_FN, PTE3_OUT, PTE3_IN, 0,
+		PTE2_FN, PTE2_OUT, PTE2_IN, 0,
+		PTE1_FN, PTE1_OUT, PTE1_IN, 0,
+		PTE0_FN, PTE0_OUT, PTE0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PFCR", 0xffec000a, 16, 2) {
+		PTF7_FN, PTF7_OUT, PTF7_IN, 0,
+		PTF6_FN, PTF6_OUT, PTF6_IN, 0,
+		PTF5_FN, PTF5_OUT, PTF5_IN, 0,
+		PTF4_FN, PTF4_OUT, PTF4_IN, 0,
+		PTF3_FN, PTF3_OUT, PTF3_IN, 0,
+		PTF2_FN, PTF2_OUT, PTF2_IN, 0,
+		PTF1_FN, PTF1_OUT, PTF1_IN, 0,
+		PTF0_FN, PTF0_OUT, PTF0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PGCR", 0xffec000c, 16, 2) {
+		PTG7_FN, PTG7_OUT, PTG7_IN, 0,
+		PTG6_FN, PTG6_OUT, PTG6_IN, 0,
+		PTG5_FN, PTG5_OUT, PTG5_IN, 0,
+		PTG4_FN, PTG4_OUT, PTG4_IN, 0,
+		PTG3_FN, PTG3_OUT, PTG3_IN, 0,
+		PTG2_FN, PTG2_OUT, PTG2_IN, 0,
+		PTG1_FN, PTG1_OUT, PTG1_IN, 0,
+		PTG0_FN, PTG0_OUT, PTG0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PHCR", 0xffec000e, 16, 2) {
+		PTH7_FN, PTH7_OUT, PTH7_IN, 0,
+		PTH6_FN, PTH6_OUT, PTH6_IN, 0,
+		PTH5_FN, PTH5_OUT, PTH5_IN, 0,
+		PTH4_FN, PTH4_OUT, PTH4_IN, 0,
+		PTH3_FN, PTH3_OUT, PTH3_IN, 0,
+		PTH2_FN, PTH2_OUT, PTH2_IN, 0,
+		PTH1_FN, PTH1_OUT, PTH1_IN, 0,
+		PTH0_FN, PTH0_OUT, PTH0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PICR", 0xffec0010, 16, 2) {
+		PTI7_FN, PTI7_OUT, PTI7_IN, 0,
+		PTI6_FN, PTI6_OUT, PTI6_IN, 0,
+		PTI5_FN, PTI5_OUT, PTI5_IN, 0,
+		PTI4_FN, PTI4_OUT, PTI4_IN, 0,
+		PTI3_FN, PTI3_OUT, PTI3_IN, 0,
+		PTI2_FN, PTI2_OUT, PTI2_IN, 0,
+		PTI1_FN, PTI1_OUT, PTI1_IN, 0,
+		PTI0_FN, PTI0_OUT, PTI0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PJCR", 0xffec0012, 16, 2) {
+		PTJ7_FN, PTJ7_OUT, PTJ7_IN, 0,
+		PTJ6_FN, PTJ6_OUT, PTJ6_IN, 0,
+		PTJ5_FN, PTJ5_OUT, PTJ5_IN, 0,
+		PTJ4_FN, PTJ4_OUT, PTJ4_IN, 0,
+		PTJ3_FN, PTJ3_OUT, PTJ3_IN, 0,
+		PTJ2_FN, PTJ2_OUT, PTJ2_IN, 0,
+		PTJ1_FN, PTJ1_OUT, PTJ1_IN, 0,
+		PTJ0_FN, PTJ0_OUT, PTJ0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PKCR", 0xffec0014, 16, 2) {
+		PTK7_FN, PTK7_OUT, PTK7_IN, 0,
+		PTK6_FN, PTK6_OUT, PTK6_IN, 0,
+		PTK5_FN, PTK5_OUT, PTK5_IN, 0,
+		PTK4_FN, PTK4_OUT, PTK4_IN, 0,
+		PTK3_FN, PTK3_OUT, PTK3_IN, 0,
+		PTK2_FN, PTK2_OUT, PTK2_IN, 0,
+		PTK1_FN, PTK1_OUT, PTK1_IN, 0,
+		PTK0_FN, PTK0_OUT, PTK0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PLCR", 0xffec0016, 16, 2) {
+		PTL7_FN, PTL7_OUT, PTL7_IN, 0,
+		PTL6_FN, PTL6_OUT, PTL6_IN, 0,
+		PTL5_FN, PTL5_OUT, PTL5_IN, 0,
+		PTL4_FN, PTL4_OUT, PTL4_IN, 0,
+		PTL3_FN, PTL3_OUT, PTL3_IN, 0,
+		PTL2_FN, PTL2_OUT, PTL2_IN, 0,
+		PTL1_FN, PTL1_OUT, PTL1_IN, 0,
+		PTL0_FN, PTL0_OUT, PTL0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PMCR", 0xffec0018, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTM6_FN, PTM6_OUT, PTM6_IN, 0,
+		PTM5_FN, PTM5_OUT, PTM5_IN, 0,
+		PTM4_FN, PTM4_OUT, PTM4_IN, 0,
+		PTM3_FN, PTM3_OUT, PTM3_IN, 0,
+		PTM2_FN, PTM2_OUT, PTM2_IN, 0,
+		PTM1_FN, PTM1_OUT, PTM1_IN, 0,
+		PTM0_FN, PTM0_OUT, PTM0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PNCR", 0xffec001a, 16, 2) {
+		PTN7_FN, PTN7_OUT, PTN7_IN, 0,
+		PTN6_FN, PTN6_OUT, PTN6_IN, 0,
+		PTN5_FN, PTN5_OUT, PTN5_IN, 0,
+		PTN4_FN, PTN4_OUT, PTN4_IN, 0,
+		PTN3_FN, PTN3_OUT, PTN3_IN, 0,
+		PTN2_FN, PTN2_OUT, PTN2_IN, 0,
+		PTN1_FN, PTN1_OUT, PTN1_IN, 0,
+		PTN0_FN, PTN0_OUT, PTN0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("POCR", 0xffec001c, 16, 2) {
+		PTO7_FN, PTO7_OUT, PTO7_IN, 0,
+		PTO6_FN, PTO6_OUT, PTO6_IN, 0,
+		PTO5_FN, PTO5_OUT, PTO5_IN, 0,
+		PTO4_FN, PTO4_OUT, PTO4_IN, 0,
+		PTO3_FN, PTO3_OUT, PTO3_IN, 0,
+		PTO2_FN, PTO2_OUT, PTO2_IN, 0,
+		PTO1_FN, PTO1_OUT, PTO1_IN, 0,
+		PTO0_FN, PTO0_OUT, PTO0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PPCR", 0xffec001e, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTP6_FN, PTP6_OUT, PTP6_IN, 0,
+		PTP5_FN, PTP5_OUT, PTP5_IN, 0,
+		PTP4_FN, PTP4_OUT, PTP4_IN, 0,
+		PTP3_FN, PTP3_OUT, PTP3_IN, 0,
+		PTP2_FN, PTP2_OUT, PTP2_IN, 0,
+		PTP1_FN, PTP1_OUT, PTP1_IN, 0,
+		PTP0_FN, PTP0_OUT, PTP0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PQCR", 0xffec0020, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTQ6_FN, PTQ6_OUT, PTQ6_IN, 0,
+		PTQ5_FN, PTQ5_OUT, PTQ5_IN, 0,
+		PTQ4_FN, PTQ4_OUT, PTQ4_IN, 0,
+		PTQ3_FN, PTQ3_OUT, PTQ3_IN, 0,
+		PTQ2_FN, PTQ2_OUT, PTQ2_IN, 0,
+		PTQ1_FN, PTQ1_OUT, PTQ1_IN, 0,
+		PTQ0_FN, PTQ0_OUT, PTQ0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PRCR", 0xffec0022, 16, 2) {
+		PTR7_FN, PTR7_OUT, PTR7_IN, 0,
+		PTR6_FN, PTR6_OUT, PTR6_IN, 0,
+		PTR5_FN, PTR5_OUT, PTR5_IN, 0,
+		PTR4_FN, PTR4_OUT, PTR4_IN, 0,
+		PTR3_FN, PTR3_OUT, PTR3_IN, 0,
+		PTR2_FN, PTR2_OUT, PTR2_IN, 0,
+		PTR1_FN, PTR1_OUT, PTR1_IN, 0,
+		PTR0_FN, PTR0_OUT, PTR0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PSCR", 0xffec0024, 16, 2) {
+		PTS7_FN, PTS7_OUT, PTS7_IN, 0,
+		PTS6_FN, PTS6_OUT, PTS6_IN, 0,
+		PTS5_FN, PTS5_OUT, PTS5_IN, 0,
+		PTS4_FN, PTS4_OUT, PTS4_IN, 0,
+		PTS3_FN, PTS3_OUT, PTS3_IN, 0,
+		PTS2_FN, PTS2_OUT, PTS2_IN, 0,
+		PTS1_FN, PTS1_OUT, PTS1_IN, 0,
+		PTS0_FN, PTS0_OUT, PTS0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PTCR", 0xffec0026, 16, 2) {
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		0, 0, 0, 0,	/* reserved: always set 1 */
+		PTT5_FN, PTT5_OUT, PTT5_IN, 0,
+		PTT4_FN, PTT4_OUT, PTT4_IN, 0,
+		PTT3_FN, PTT3_OUT, PTT3_IN, 0,
+		PTT2_FN, PTT2_OUT, PTT2_IN, 0,
+		PTT1_FN, PTT1_OUT, PTT1_IN, 0,
+		PTT0_FN, PTT0_OUT, PTT0_IN, 0 }
+	},
+	{ PINMUX_CFG_REG("PUCR", 0xffec0028, 16, 2) {
+		PTU7_FN, PTU7_OUT, PTU7_IN, PTU7_IN_PU,
+		PTU6_FN, PTU6_OUT, PTU6_IN, PTU6_IN_PU,
+		PTU5_FN, PTU5_OUT, PTU5_IN, PTU5_IN_PU,
+		PTU4_FN, PTU4_OUT, PTU4_IN, PTU4_IN_PU,
+		PTU3_FN, PTU3_OUT, PTU3_IN, PTU3_IN_PU,
+		PTU2_FN, PTU2_OUT, PTU2_IN, PTU2_IN_PU,
+		PTU1_FN, PTU1_OUT, PTU1_IN, PTU1_IN_PU,
+		PTU0_FN, PTU0_OUT, PTU0_IN, PTU0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PVCR", 0xffec002a, 16, 2) {
+		PTV7_FN, PTV7_OUT, PTV7_IN, PTV7_IN_PU,
+		PTV6_FN, PTV6_OUT, PTV6_IN, PTV6_IN_PU,
+		PTV5_FN, PTV5_OUT, PTV5_IN, PTV5_IN_PU,
+		PTV4_FN, PTV4_OUT, PTV4_IN, PTV4_IN_PU,
+		PTV3_FN, PTV3_OUT, PTV3_IN, PTV3_IN_PU,
+		PTV2_FN, PTV2_OUT, PTV2_IN, PTV2_IN_PU,
+		PTV1_FN, PTV1_OUT, PTV1_IN, PTV1_IN_PU,
+		PTV0_FN, PTV0_OUT, PTV0_IN, PTV0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PWCR", 0xffec002c, 16, 2) {
+		PTW7_FN, PTW7_OUT, PTW7_IN, PTW7_IN_PU,
+		PTW6_FN, PTW6_OUT, PTW6_IN, PTW6_IN_PU,
+		PTW5_FN, PTW5_OUT, PTW5_IN, PTW5_IN_PU,
+		PTW4_FN, PTW4_OUT, PTW4_IN, PTW4_IN_PU,
+		PTW3_FN, PTW3_OUT, PTW3_IN, PTW3_IN_PU,
+		PTW2_FN, PTW2_OUT, PTW2_IN, PTW2_IN_PU,
+		PTW1_FN, PTW1_OUT, PTW1_IN, PTW1_IN_PU,
+		PTW0_FN, PTW0_OUT, PTW0_IN, PTW0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PXCR", 0xffec002e, 16, 2) {
+		PTX7_FN, PTX7_OUT, PTX7_IN, PTX7_IN_PU,
+		PTX6_FN, PTX6_OUT, PTX6_IN, PTX6_IN_PU,
+		PTX5_FN, PTX5_OUT, PTX5_IN, PTX5_IN_PU,
+		PTX4_FN, PTX4_OUT, PTX4_IN, PTX4_IN_PU,
+		PTX3_FN, PTX3_OUT, PTX3_IN, PTX3_IN_PU,
+		PTX2_FN, PTX2_OUT, PTX2_IN, PTX2_IN_PU,
+		PTX1_FN, PTX1_OUT, PTX1_IN, PTX1_IN_PU,
+		PTX0_FN, PTX0_OUT, PTX0_IN, PTX0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PYCR", 0xffec0030, 16, 2) {
+		PTY7_FN, PTY7_OUT, PTY7_IN, PTY7_IN_PU,
+		PTY6_FN, PTY6_OUT, PTY6_IN, PTY6_IN_PU,
+		PTY5_FN, PTY5_OUT, PTY5_IN, PTY5_IN_PU,
+		PTY4_FN, PTY4_OUT, PTY4_IN, PTY4_IN_PU,
+		PTY3_FN, PTY3_OUT, PTY3_IN, PTY3_IN_PU,
+		PTY2_FN, PTY2_OUT, PTY2_IN, PTY2_IN_PU,
+		PTY1_FN, PTY1_OUT, PTY1_IN, PTY1_IN_PU,
+		PTY0_FN, PTY0_OUT, PTY0_IN, PTY0_IN_PU }
+	},
+	{ PINMUX_CFG_REG("PZCR", 0xffec0032, 16, 2) {
+		0, PTZ7_OUT, PTZ7_IN, 0,
+		0, PTZ6_OUT, PTZ6_IN, 0,
+		0, PTZ5_OUT, PTZ5_IN, 0,
+		0, PTZ4_OUT, PTZ4_IN, 0,
+		0, PTZ3_OUT, PTZ3_IN, 0,
+		0, PTZ2_OUT, PTZ2_IN, 0,
+		0, PTZ1_OUT, PTZ1_IN, 0,
+		0, PTZ0_OUT, PTZ0_IN, 0 }
+	},
+
+	{ PINMUX_CFG_REG("PSEL0", 0xffec0070, 16, 1) {
+		PS0_15_FN3, PS0_15_FN1,
+		PS0_14_FN3, PS0_14_FN1,
+		PS0_13_FN3, PS0_13_FN1,
+		PS0_12_FN3, PS0_12_FN1,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS0_7_FN2, PS0_7_FN1,
+		PS0_6_FN2, PS0_6_FN1,
+		PS0_5_FN2, PS0_5_FN1,
+		PS0_4_FN2, PS0_4_FN1,
+		PS0_3_FN2, PS0_3_FN1,
+		PS0_2_FN2, PS0_2_FN1,
+		PS0_1_FN2, PS0_1_FN1,
+		0, 0, }
+	},
+	{ PINMUX_CFG_REG("PSEL1", 0xffec0072, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS1_7_FN1, PS1_7_FN3,
+		PS1_6_FN1, PS1_6_FN3,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0, }
+	},
+	{ PINMUX_CFG_REG("PSEL2", 0xffec0074, 16, 1) {
+		0, 0,
+		0, 0,
+		PS2_13_FN3, PS2_13_FN1,
+		PS2_12_FN3, PS2_12_FN1,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS2_1_FN1, PS2_1_FN2,
+		PS2_0_FN1, PS2_0_FN2, }
+	},
+	{ PINMUX_CFG_REG("PSEL4", 0xffec0078, 16, 1) {
+		PS4_15_FN2, PS4_15_FN1,
+		PS4_14_FN2, PS4_14_FN1,
+		PS4_13_FN2, PS4_13_FN1,
+		PS4_12_FN2, PS4_12_FN1,
+		PS4_11_FN2, PS4_11_FN1,
+		PS4_10_FN2, PS4_10_FN1,
+		PS4_9_FN2, PS4_9_FN1,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS4_3_FN2, PS4_3_FN1,
+		PS4_2_FN2, PS4_2_FN1,
+		PS4_1_FN2, PS4_1_FN1,
+		PS4_0_FN2, PS4_0_FN1, }
+	},
+	{ PINMUX_CFG_REG("PSEL5", 0xffec007a, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS5_9_FN1, PS5_9_FN2,
+		PS5_8_FN1, PS5_8_FN2,
+		PS5_7_FN1, PS5_7_FN2,
+		PS5_6_FN1, PS5_6_FN2,
+		PS5_5_FN1, PS5_5_FN2,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0, }
+	},
+	{ PINMUX_CFG_REG("PSEL6", 0xffec007c, 16, 1) {
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		0, 0,
+		PS6_7_FN_AN, PS6_7_FN_EV,
+		PS6_6_FN_AN, PS6_6_FN_EV,
+		PS6_5_FN_AN, PS6_5_FN_EV,
+		PS6_4_FN_AN, PS6_4_FN_EV,
+		PS6_3_FN_AN, PS6_3_FN_EV,
+		PS6_2_FN_AN, PS6_2_FN_EV,
+		PS6_1_FN_AN, PS6_1_FN_EV,
+		PS6_0_FN_AN, PS6_0_FN_EV, }
+	},
+	{}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PADR", 0xffec0034, 8) {
+		PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+		PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+	},
+	{ PINMUX_DATA_REG("PBDR", 0xffec0036, 8) {
+		PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+		PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+	},
+	{ PINMUX_DATA_REG("PCDR", 0xffec0038, 8) {
+		PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+		PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA }
+	},
+	{ PINMUX_DATA_REG("PDDR", 0xffec003a, 8) {
+		PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+		PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+	},
+	{ PINMUX_DATA_REG("PEDR", 0xffec003c, 8) {
+		PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+		PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA }
+	},
+	{ PINMUX_DATA_REG("PFDR", 0xffec003e, 8) {
+		PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+		PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+	},
+	{ PINMUX_DATA_REG("PGDR", 0xffec0040, 8) {
+		PTG7_DATA, PTG6_DATA, PTG5_DATA, PTG4_DATA,
+		PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+	},
+	{ PINMUX_DATA_REG("PHDR", 0xffec0042, 8) {
+		PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+		PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+	},
+	{ PINMUX_DATA_REG("PIDR", 0xffec0044, 8) {
+		PTI7_DATA, PTI6_DATA, PTI5_DATA, PTI4_DATA,
+		PTI3_DATA, PTI2_DATA, PTI1_DATA, PTI0_DATA }
+	},
+	{ PINMUX_DATA_REG("PJDR", 0xffec0046, 8) {
+		PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, PTJ4_DATA,
+		PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PKDR", 0xffec0048, 8) {
+		PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+		PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+	},
+	{ PINMUX_DATA_REG("PLDR", 0xffec004a, 8) {
+		PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+		PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA }
+	},
+	{ PINMUX_DATA_REG("PMDR", 0xffec004c, 8) {
+		0, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+		PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+	},
+	{ PINMUX_DATA_REG("PNDR", 0xffec004e, 8) {
+		PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+		PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA }
+	},
+	{ PINMUX_DATA_REG("PODR", 0xffec0050, 8) {
+		PTO7_DATA, PTO6_DATA, PTO5_DATA, PTO4_DATA,
+		PTO3_DATA, PTO2_DATA, PTO1_DATA, PTO0_DATA }
+	},
+	{ PINMUX_DATA_REG("PPDR", 0xffec0052, 8) {
+		0, PTP6_DATA, PTP5_DATA, PTP4_DATA,
+		PTP3_DATA, PTP2_DATA, PTP1_DATA, PTP0_DATA }
+	},
+	{ PINMUX_DATA_REG("PQDR", 0xffec0054, 8) {
+		0, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+		PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA }
+	},
+	{ PINMUX_DATA_REG("PRDR", 0xffec0056, 8) {
+		PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+		PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+	},
+	{ PINMUX_DATA_REG("PSDR", 0xffec0058, 8) {
+		PTS7_DATA, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+		PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+	},
+	{ PINMUX_DATA_REG("PTDR", 0xffec005a, 8) {
+		0, 0, PTT5_DATA, PTT4_DATA,
+		PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PUDR", 0xffec005c, 8) {
+		PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+		PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+	},
+	{ PINMUX_DATA_REG("PVDR", 0xffec005e, 8) {
+		PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+		PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+	},
+	{ PINMUX_DATA_REG("PWDR", 0xffec0060, 8) {
+		PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+		PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA }
+	},
+	{ PINMUX_DATA_REG("PXDR", 0xffec0062, 8) {
+		PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+		PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA }
+	},
+	{ PINMUX_DATA_REG("PYDR", 0xffec0064, 8) {
+		PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+		PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA }
+	},
+	{ PINMUX_DATA_REG("PZDR", 0xffec0066, 8) {
+		PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+		PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh7757_pinmux_info = {
+	.name = "sh7757_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PTA7,
+	.last_gpio = GPIO_FN_D0,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+	return register_pinmux(&sh7757_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
new file mode 100644
index 00000000000..c470e15f2e0
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -0,0 +1,513 @@
+/*
+ * SH7757 Setup
+ *
+ * Copyright (C) 2009  Renesas Solutions Corp.
+ *
+ *  based on setup-sh7785.c : Copyright (C) 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/sh_timer.h>
+
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "peripheral_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xfe430008,
+		.end	= 0xfe430013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "peripheral_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xfe430014,
+		.end	= 0xfe43001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xfe4b0000,		/* SCIF2 */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 40, 40, 40 },
+	}, {
+		.mapbase	= 0xfe4c0000,		/* SCIF3 */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 76, 76, 76, 76 },
+	}, {
+		.mapbase	= 0xfe4d0000,		/* SCIF4 */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 104, 104, 104, 104 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *sh7757_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&sci_device,
+};
+
+static int __init sh7757_devices_setup(void)
+{
+	return platform_add_devices(sh7757_devices,
+				    ARRAY_SIZE(sh7757_devices));
+}
+arch_initcall(sh7757_devices_setup);
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+	IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+
+	SDHI,
+	DVC,
+	IRQ8, IRQ9, IRQ10,
+	WDT0,
+	TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI,
+
+	ARC4,
+	DMAC0,
+	IRQ11,
+	SCIF2,
+	DMAC1_6,
+	USB0,
+	IRQ12,
+	JMC,
+	SPI1,
+	IRQ13, IRQ14,
+	USB1,
+	TMR01, TMR23, TMR45,
+	WDT1,
+	FRT,
+	LPC,
+	SCIF0, SCIF1, SCIF3,
+	PECI0I, PECI1I, PECI2I,
+	IRQ15,
+	ETHERC,
+	SPI0,
+	ADC1,
+	DMAC1_8,
+	SIM,
+	TMU3, TMU4, TMU5,
+	ADC0,
+	SCIF4,
+	IIC0_0, IIC0_1, IIC0_2, IIC0_3,
+	IIC1_0, IIC1_1, IIC1_2, IIC1_3,
+	IIC2_0, IIC2_1, IIC2_2, IIC2_3,
+	IIC3_0, IIC3_1, IIC3_2, IIC3_3,
+	IIC4_0, IIC4_1, IIC4_2, IIC4_3,
+	IIC5_0, IIC5_1, IIC5_2, IIC5_3,
+	IIC6_0, IIC6_1, IIC6_2, IIC6_3,
+	IIC7_0, IIC7_1, IIC7_2, IIC7_3,
+	IIC8_0, IIC8_1, IIC8_2, IIC8_3,
+	IIC9_0, IIC9_1, IIC9_2, IIC9_3,
+	PCIINTA,
+	PCIE,
+	SGPIO,
+
+	/* interrupt groups */
+
+	TMU012, TMU345,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(SDHI, 0x480), INTC_VECT(SDHI, 0x04a0),
+	INTC_VECT(SDHI, 0x4c0),
+	INTC_VECT(DVC, 0x4e0),
+	INTC_VECT(IRQ8, 0x500), INTC_VECT(IRQ9, 0x520),
+	INTC_VECT(IRQ10, 0x540),
+	INTC_VECT(WDT0, 0x560),
+	INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
+	INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
+	INTC_VECT(HUDI, 0x600),
+	INTC_VECT(ARC4, 0x620),
+	INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
+	INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
+	INTC_VECT(DMAC0, 0x6c0),
+	INTC_VECT(IRQ11, 0x6e0),
+	INTC_VECT(SCIF2, 0x700), INTC_VECT(SCIF2, 0x720),
+	INTC_VECT(SCIF2, 0x740), INTC_VECT(SCIF2, 0x760),
+	INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
+	INTC_VECT(DMAC1_6, 0x7c0), INTC_VECT(DMAC1_6, 0x7e0),
+	INTC_VECT(USB0, 0x840),
+	INTC_VECT(IRQ12, 0x880),
+	INTC_VECT(JMC, 0x8a0),
+	INTC_VECT(SPI1, 0x8c0),
+	INTC_VECT(IRQ13, 0x8e0), INTC_VECT(IRQ14, 0x900),
+	INTC_VECT(USB1, 0x920),
+	INTC_VECT(TMR01, 0xa00), INTC_VECT(TMR23, 0xa20),
+	INTC_VECT(TMR45, 0xa40),
+	INTC_VECT(WDT1, 0xa60),
+	INTC_VECT(FRT, 0xa80),
+	INTC_VECT(LPC, 0xaa0), INTC_VECT(LPC, 0xac0),
+	INTC_VECT(LPC, 0xae0), INTC_VECT(LPC, 0xb00),
+	INTC_VECT(LPC, 0xb20),
+	INTC_VECT(SCIF0, 0xb40), INTC_VECT(SCIF1, 0xb60),
+	INTC_VECT(SCIF3, 0xb80), INTC_VECT(SCIF3, 0xba0),
+	INTC_VECT(SCIF3, 0xbc0), INTC_VECT(SCIF3, 0xbe0),
+	INTC_VECT(PECI0I, 0xc00), INTC_VECT(PECI1I, 0xc20),
+	INTC_VECT(PECI2I, 0xc40),
+	INTC_VECT(IRQ15, 0xc60),
+	INTC_VECT(ETHERC, 0xc80), INTC_VECT(ETHERC, 0xca0),
+	INTC_VECT(SPI0, 0xcc0),
+	INTC_VECT(ADC1, 0xce0),
+	INTC_VECT(DMAC1_8, 0xd00), INTC_VECT(DMAC1_8, 0xd20),
+	INTC_VECT(DMAC1_8, 0xd40), INTC_VECT(DMAC1_8, 0xd60),
+	INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
+	INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40),
+	INTC_VECT(ADC0, 0xe60),
+	INTC_VECT(SCIF4, 0xf00), INTC_VECT(SCIF4, 0xf20),
+	INTC_VECT(SCIF4, 0xf40), INTC_VECT(SCIF4, 0xf60),
+	INTC_VECT(IIC0_0, 0x1400), INTC_VECT(IIC0_1, 0x1420),
+	INTC_VECT(IIC0_2, 0x1440), INTC_VECT(IIC0_3, 0x1460),
+	INTC_VECT(IIC1_0, 0x1480), INTC_VECT(IIC1_1, 0x14e0),
+	INTC_VECT(IIC1_2, 0x1500), INTC_VECT(IIC1_3, 0x1520),
+	INTC_VECT(IIC2_0, 0x1540), INTC_VECT(IIC2_1, 0x1560),
+	INTC_VECT(IIC2_2, 0x1580), INTC_VECT(IIC2_3, 0x1600),
+	INTC_VECT(IIC3_0, 0x1620), INTC_VECT(IIC3_1, 0x1640),
+	INTC_VECT(IIC3_2, 0x16e0), INTC_VECT(IIC3_3, 0x1700),
+	INTC_VECT(IIC4_0, 0x17c0), INTC_VECT(IIC4_1, 0x1800),
+	INTC_VECT(IIC4_2, 0x1820), INTC_VECT(IIC4_3, 0x1840),
+	INTC_VECT(IIC5_0, 0x1860), INTC_VECT(IIC5_1, 0x1880),
+	INTC_VECT(IIC5_2, 0x18a0), INTC_VECT(IIC5_3, 0x18c0),
+	INTC_VECT(IIC6_0, 0x18e0), INTC_VECT(IIC6_1, 0x1900),
+	INTC_VECT(IIC6_2, 0x1920), INTC_VECT(IIC6_3, 0x1980),
+	INTC_VECT(IIC7_0, 0x19a0), INTC_VECT(IIC7_1, 0x1a00),
+	INTC_VECT(IIC7_2, 0x1a20), INTC_VECT(IIC7_3, 0x1a40),
+	INTC_VECT(IIC8_0, 0x1a60), INTC_VECT(IIC8_1, 0x1a80),
+	INTC_VECT(IIC8_2, 0x1aa0), INTC_VECT(IIC8_3, 0x1b40),
+	INTC_VECT(IIC9_0, 0x1b60), INTC_VECT(IIC9_1, 0x1b80),
+	INTC_VECT(IIC9_2, 0x1c00), INTC_VECT(IIC9_3, 0x1c20),
+	INTC_VECT(PCIINTA, 0x1ce0),
+	INTC_VECT(PCIE, 0x1e00),
+	INTC_VECT(SGPIO, 0x1f80),
+	INTC_VECT(SGPIO, 0x1fa0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+	    IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+	    IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+	    IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+	    IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+	    IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+	    IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+	    IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, DMAC1_8, 0, PECI0I, LPC, FRT, WDT1, TMR45,
+	    TMR23, TMR01, 0, 0, 0, 0, 0, DMAC0,
+	    HUDI, 0, WDT0, SCIF3, SCIF2, SDHI, TMU345, TMU012
+	     } },
+
+	{ 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
+	  { IRQ15, IRQ14, IRQ13, IRQ12, IRQ11, IRQ10, SCIF4, ETHERC,
+	    IRQ9, IRQ8, SCIF1, SCIF0, USB0, 0, 0, USB1,
+	    ADC1, 0, DMAC1_6, ADC0, SPI0, SIM, PECI2I, PECI1I,
+	    ARC4, 0, SPI1, JMC, 0, 0, 0, DVC
+	     } },
+
+	{ 0xffd10038, 0xffd1003c, 32, /* INT2MSKR2 / INT2MSKCR2 */
+	  { IIC4_1, IIC4_2, IIC5_0, 0, 0, 0, SGPIO, 0,
+	    0, 0, 0, IIC9_2, IIC8_2, IIC8_1, IIC8_0, IIC7_3,
+	    IIC7_2, IIC7_1, IIC6_3, IIC0_0, IIC0_1, IIC0_2, IIC0_3, IIC3_1,
+	    IIC2_3, 0, IIC2_1, IIC9_1, IIC3_3, IIC1_0, PCIE, IIC2_2
+	     } },
+
+	{ 0xffd100d0, 0xff1400d4, 32, /* INT2MSKR3 / INT2MSKCR4 */
+	  { 0, IIC6_1, IIC6_0, IIC5_1, IIC3_2, IIC2_0, 0, 0,
+	    IIC1_3, IIC1_2, IIC9_0, IIC8_3, IIC4_3, IIC7_0, 0, IIC6_2,
+	    PCIINTA, 0, IIC4_0, 0, 0, 0, 0, IIC9_3,
+	    IIC3_0, 0, IIC5_3, IIC5_2, 0, 0, 0, IIC1_1
+	     } },
+};
+
+#define INTPRI		0xffd00010
+#define INT2PRI0	0xffd40000
+#define INT2PRI1	0xffd40004
+#define INT2PRI2	0xffd40008
+#define INT2PRI3	0xffd4000c
+#define INT2PRI4	0xffd40010
+#define INT2PRI5	0xffd40014
+#define INT2PRI6	0xffd40018
+#define INT2PRI7	0xffd4001c
+#define INT2PRI8	0xffd400a0
+#define INT2PRI9	0xffd400a4
+#define INT2PRI10	0xffd400a8
+#define INT2PRI11	0xffd400ac
+#define INT2PRI12	0xffd400b0
+#define INT2PRI13	0xffd400b4
+#define INT2PRI14	0xffd400b8
+#define INT2PRI15	0xffd400bc
+#define INT2PRI16	0xffd10000
+#define INT2PRI17	0xffd10004
+#define INT2PRI18	0xffd10008
+#define INT2PRI19	0xffd1000c
+#define INT2PRI20	0xffd10010
+#define INT2PRI21	0xffd10014
+#define INT2PRI22	0xffd10018
+#define INT2PRI23	0xffd1001c
+#define INT2PRI24	0xffd100a0
+#define INT2PRI25	0xffd100a4
+#define INT2PRI26	0xffd100a8
+#define INT2PRI27	0xffd100ac
+#define INT2PRI28	0xffd100b0
+#define INT2PRI29	0xffd100b4
+#define INT2PRI30	0xffd100b8
+#define INT2PRI31	0xffd100bc
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ INTPRI, 0, 32, 4, { IRQ0, IRQ1, IRQ2, IRQ3,
+			      IRQ4, IRQ5, IRQ6, IRQ7 } },
+
+	{ INT2PRI0, 0, 32, 8, { TMU0, TMU1, TMU2, TMU2_TICPI } },
+	{ INT2PRI1, 0, 32, 8, { TMU3, TMU4, TMU5, SDHI } },
+	{ INT2PRI2, 0, 32, 8, { SCIF2, SCIF3, WDT0, IRQ8 } },
+	{ INT2PRI3, 0, 32, 8, { HUDI, DMAC0, ADC0, IRQ9 } },
+	{ INT2PRI4, 0, 32, 8, { IRQ10, 0, TMR01, TMR23 } },
+	{ INT2PRI5, 0, 32, 8, { TMR45, WDT1, FRT, LPC } },
+	{ INT2PRI6, 0, 32, 8, { PECI0I, ETHERC, DMAC1_8, 0 } },
+	{ INT2PRI7, 0, 32, 8, { SCIF4, 0, IRQ11, IRQ12 } },
+	{ INT2PRI8, 0, 32, 8, { 0, 0, 0, DVC } },
+	{ INT2PRI9, 0, 32, 8, { ARC4, 0, SPI1, JMC } },
+	{ INT2PRI10, 0, 32, 8, { SPI0, SIM, PECI2I, PECI1I } },
+	{ INT2PRI11, 0, 32, 8, { ADC1, IRQ13, DMAC1_6, IRQ14 } },
+	{ INT2PRI12, 0, 32, 8, { USB0, 0, IRQ15, USB1 } },
+	{ INT2PRI13, 0, 32, 8, { 0, 0, SCIF1, SCIF0 } },
+
+	{ INT2PRI16, 0, 32, 8, { IIC2_2, 0, 0, 0 } },
+	{ INT2PRI17, 0, 32, 8, { PCIE, 0, 0, IIC1_0 } },
+	{ INT2PRI18, 0, 32, 8, { IIC3_3, IIC9_1, IIC2_1, IIC1_2 } },
+	{ INT2PRI19, 0, 32, 8, { IIC2_3, IIC3_1, 0, IIC1_3 } },
+	{ INT2PRI20, 0, 32, 8, { IIC2_0, IIC6_3, IIC7_1, IIC7_2 } },
+	{ INT2PRI21, 0, 32, 8, { IIC7_3, IIC8_0, IIC8_1, IIC8_2 } },
+	{ INT2PRI22, 0, 32, 8, { IIC9_2, 0, 0, 0 } },
+	{ INT2PRI23, 0, 32, 8, { 0, SGPIO, IIC3_2, IIC5_1 } },
+	{ INT2PRI24, 0, 32, 8, { 0, 0, 0, IIC1_1 } },
+	{ INT2PRI25, 0, 32, 8, { IIC3_0, 0, IIC5_3, IIC5_2 } },
+	{ INT2PRI26, 0, 32, 8, { 0, 0, 0, IIC9_3 } },
+	{ INT2PRI27, 0, 32, 8, { PCIINTA, IIC6_0, IIC4_0, IIC6_1 } },
+	{ INT2PRI28, 0, 32, 8, { IIC4_3, IIC7_0, 0, IIC6_2 } },
+	{ INT2PRI29, 0, 32, 8, { 0, 0, IIC9_0, IIC8_3 } },
+	{ INT2PRI30, 0, 32, 8, { IIC4_1, IIC4_2, IIC5_0, 0 } },
+	{ INT2PRI31, 0, 32, 8, { IIC0_0, IIC0_1, IIC0_2, IIC0_3 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7757-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7757-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect vectors_irl0123[] __initdata = {
+	INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+	INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+	INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+	INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+	INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+	INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+	INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+	INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+	INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
+	INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
+	INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
+	INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
+	INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
+	INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
+	INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
+	INTC_VECT(IRL4_HHHL, 0xcc0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,
+			 NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7757-irl4567", vectors_irl4567,
+			 NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ3-0 + IRQ7-4 */
+	ctrl_outl(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	ctrl_outl(0xc0000000, INTC_INTMSK1);
+	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+	/* select IRL mode for IRL3-0 + IRL7-4 */
+	ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+	/* disable holding function, ie enable "SH-4 Mode" */
+	ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ7654:
+		/* select IRQ mode for IRL7-4 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq4567);
+		break;
+	case IRQ_MODE_IRQ3210:
+		/* select IRQ mode for IRL3-0 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+		register_intc_controller(&intc_desc_irq0123);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl4567);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_desc_irl0123);
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index ceb409bf774..212e6bddaeb 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -481,7 +481,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
 	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
 	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
-	[CPU_SH7786]	= "SH7786",
+	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
 	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 2795618e4f0..64dc1ad5980 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -82,7 +82,7 @@ config 32BIT
 
 config PMB_ENABLE
 	bool "Support 32-bit physical addressing through PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
 	select 32BIT
 	default y
 	help
@@ -97,7 +97,7 @@ choice
 
 config PMB
 	bool "PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
 	select 32BIT
 	help
 	  If you say Y here, physical addressing will be extended to
@@ -106,7 +106,8 @@ config PMB
 
 config PMB_FIXED
 	bool "fixed PMB"
-	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || \
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || \
+					   CPU_SUBTYPE_SH7780 || \
 					   CPU_SUBTYPE_SH7785)
 	select 32BIT
 	help
-- 
cgit v1.2.3


From 64a6d72213dd810dd55bd0a503c36150af41c3c3 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 21 Aug 2009 18:21:07 +0900
Subject: sh: Kill off now redundant local irq disabling.

on_each_cpu() takes care of IRQ and preempt handling, the localized
handling in each of the called functions can be killed off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh2a.c   |  6 +----
 arch/sh/mm/cache-sh4.c    | 61 ++++++++++++++++++++---------------------------
 arch/sh/mm/cache-sh5.c    | 29 +++++-----------------
 arch/sh/mm/cache-sh7705.c |  8 -------
 4 files changed, 33 insertions(+), 71 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index 975899d8356..d783361e3f0 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -102,12 +102,10 @@ static void sh2a_flush_icache_range(void *args)
 	struct flusher_data *data = args;
 	unsigned long start, end;
 	unsigned long v;
-	unsigned long flags;
 
 	start = data->addr1 & ~(L1_CACHE_BYTES-1);
 	end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
 
-	local_irq_save(flags);
 	jump_to_uncached();
 
 	for (v = start; v < end; v+=L1_CACHE_BYTES) {
@@ -122,12 +120,10 @@ static void sh2a_flush_icache_range(void *args)
 			}
 		}
 		/* I-Cache invalidate */
-		ctrl_outl(addr,
-			  CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
+		ctrl_outl(addr, CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
 	}
 
 	back_to_cached();
-	local_irq_restore(flags);
 }
 
 void __init sh2a_cache_init(void)
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 9201b37c7cc..e3b77f0fa47 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -48,48 +48,44 @@ static void sh4_flush_icache_range(void *args)
 	struct flusher_data *data = args;
 	int icacheaddr;
 	unsigned long start, end;
-	unsigned long flags, v;
+	unsigned long v;
 	int i;
 
 	start = data->addr1;
 	end = data->addr2;
 
-       /* If there are too many pages then just blow the caches */
-        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-                local_flush_cache_all(args);
-       } else {
-               /* selectively flush d-cache then invalidate the i-cache */
-               /* this is inefficient, so only use for small ranges */
-               start &= ~(L1_CACHE_BYTES-1);
-               end += L1_CACHE_BYTES-1;
-               end &= ~(L1_CACHE_BYTES-1);
-
-               local_irq_save(flags);
-               jump_to_uncached();
-
-               for (v = start; v < end; v+=L1_CACHE_BYTES) {
-                       asm volatile("ocbwb     %0"
-                                    : /* no output */
-                                    : "m" (__m(v)));
-
-                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
-                                       v & cpu_data->icache.entry_mask);
-
-                       for (i = 0; i < cpu_data->icache.ways;
-                               i++, icacheaddr += cpu_data->icache.way_incr)
-                                       /* Clear i-cache line valid-bit */
-                                       ctrl_outl(0, icacheaddr);
-               }
+	/* If there are too many pages then just blow the caches */
+	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+		local_flush_cache_all(args);
+	} else {
+		/* selectively flush d-cache then invalidate the i-cache */
+		/* this is inefficient, so only use for small ranges */
+		start &= ~(L1_CACHE_BYTES-1);
+		end += L1_CACHE_BYTES-1;
+		end &= ~(L1_CACHE_BYTES-1);
+
+		jump_to_uncached();
+
+		for (v = start; v < end; v+=L1_CACHE_BYTES) {
+			__ocbwb(v);
+
+			icacheaddr = CACHE_IC_ADDRESS_ARRAY |
+				(v & cpu_data->icache.entry_mask);
+
+			for (i = 0; i < cpu_data->icache.ways;
+				i++, icacheaddr += cpu_data->icache.way_incr)
+				/* Clear i-cache line valid-bit */
+				ctrl_outl(0, icacheaddr);
+		}
 
 		back_to_cached();
-		local_irq_restore(flags);
 	}
 }
 
 static inline void flush_cache_4096(unsigned long start,
 				    unsigned long phys)
 {
-	unsigned long flags, exec_offset = 0;
+	unsigned long exec_offset = 0;
 
 	/*
 	 * All types of SH-4 require PC to be in P2 to operate on the I-cache.
@@ -99,10 +95,8 @@ static inline void flush_cache_4096(unsigned long start,
 	    (start < CACHE_OC_ADDRESS_ARRAY))
 		exec_offset = 0x20000000;
 
-	local_irq_save(flags);
 	__flush_cache_4096(start | SH_CACHE_ASSOC,
 			   P1SEGADDR(phys), exec_offset);
-	local_irq_restore(flags);
 }
 
 /*
@@ -135,9 +129,8 @@ static void sh4_flush_dcache_page(void *page)
 /* TODO: Selective icache invalidation through IC address array.. */
 static void __uses_jump_to_uncached flush_icache_all(void)
 {
-	unsigned long flags, ccr;
+	unsigned long ccr;
 
-	local_irq_save(flags);
 	jump_to_uncached();
 
 	/* Flush I-cache */
@@ -149,9 +142,7 @@ static void __uses_jump_to_uncached flush_icache_all(void)
 	 * back_to_cached() will take care of the barrier for us, don't add
 	 * another one!
 	 */
-
 	back_to_cached();
-	local_irq_restore(flags);
 }
 
 static inline void flush_dcache_all(void)
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 467ff8e260f..2f9dd6df00a 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -34,28 +34,22 @@ static inline void
 sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid,
 			   unsigned long paddr)
 {
-	local_irq_disable();
 	sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr);
 }
 
 static inline void sh64_teardown_dtlb_cache_slot(void)
 {
 	sh64_teardown_tlb_slot(dtlb_cache_slot);
-	local_irq_enable();
 }
 
 static inline void sh64_icache_inv_all(void)
 {
 	unsigned long long addr, flag, data;
-	unsigned long flags;
 
 	addr = ICCR0;
 	flag = ICCR0_ICI;
 	data = 0;
 
-	/* Make this a critical section for safety (probably not strictly necessary.) */
-	local_irq_save(flags);
-
 	/* Without %1 it gets unexplicably wrong */
 	__asm__ __volatile__ (
 		"getcfg	%3, 0, %0\n\t"
@@ -64,8 +58,6 @@ static inline void sh64_icache_inv_all(void)
 		"synci"
 		: "=&r" (data)
 		: "0" (data), "r" (flag), "r" (addr));
-
-	local_irq_restore(flags);
 }
 
 static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end)
@@ -90,7 +82,6 @@ static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long
 	   Also, eaddr is page-aligned. */
 	unsigned int cpu = smp_processor_id();
 	unsigned long long addr, end_addr;
-	unsigned long flags = 0;
 	unsigned long running_asid, vma_asid;
 	addr = eaddr;
 	end_addr = addr + PAGE_SIZE;
@@ -111,10 +102,9 @@ static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long
 
 	running_asid = get_asid();
 	vma_asid = cpu_asid(cpu, vma->vm_mm);
-	if (running_asid != vma_asid) {
-		local_irq_save(flags);
+	if (running_asid != vma_asid)
 		switch_and_save_asid(vma_asid);
-	}
+
 	while (addr < end_addr) {
 		/* Worth unrolling a little */
 		__asm__ __volatile__("icbi %0,  0" : : "r" (addr));
@@ -123,10 +113,9 @@ static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long
 		__asm__ __volatile__("icbi %0, 96" : : "r" (addr));
 		addr += 128;
 	}
-	if (running_asid != vma_asid) {
+
+	if (running_asid != vma_asid)
 		switch_and_save_asid(running_asid);
-		local_irq_restore(flags);
-	}
 }
 
 static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
@@ -159,16 +148,12 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
 		unsigned long eaddr;
 		unsigned long after_last_page_start;
 		unsigned long mm_asid, current_asid;
-		unsigned long flags = 0;
 
 		mm_asid = cpu_asid(smp_processor_id(), mm);
 		current_asid = get_asid();
 
-		if (mm_asid != current_asid) {
-			/* Switch ASID and run the invalidate loop under cli */
-			local_irq_save(flags);
+		if (mm_asid != current_asid)
 			switch_and_save_asid(mm_asid);
-		}
 
 		aligned_start = start & PAGE_MASK;
 		after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK);
@@ -194,10 +179,8 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
 			aligned_start = vma->vm_end; /* Skip to start of next region */
 		}
 
-		if (mm_asid != current_asid) {
+		if (mm_asid != current_asid)
 			switch_and_save_asid(current_asid);
-			local_irq_restore(flags);
-		}
 	}
 }
 
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 6293f57fa88..9dc38660e3d 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -81,7 +81,6 @@ static void sh7705_flush_icache_range(void *args)
 static void __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
-	unsigned long flags;
 
 	phys |= SH_CACHE_VALID;
 
@@ -98,7 +97,6 @@ static void __flush_dcache_page(unsigned long phys)
 	 * potential cache aliasing, therefore the optimisation is probably not
 	 * possible.
 	 */
-	local_irq_save(flags);
 	jump_to_uncached();
 
 	ways = current_cpu_data.dcache.ways;
@@ -126,7 +124,6 @@ static void __flush_dcache_page(unsigned long phys)
 	} while (--ways);
 
 	back_to_cached();
-	local_irq_restore(flags);
 }
 
 /*
@@ -145,14 +142,9 @@ static void sh7705_flush_dcache_page(void *page)
 
 static void sh7705_flush_cache_all(void *args)
 {
-	unsigned long flags;
-
-	local_irq_save(flags);
 	jump_to_uncached();
-
 	cache_wback_all();
 	back_to_cached();
-	local_irq_restore(flags);
 }
 
 /*
-- 
cgit v1.2.3


From fb3f3e7fc6d4afb32f9eba32124beaf40313de3c Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 16 Aug 2009 15:44:08 +0100
Subject: sh: unwinder: Fix memory leak and create our own kmem cache

Plug a memory leak in dwarf_unwinder_dump() where we didn't free the
memory that we had previously allocated for the DWARF frames and DWARF
registers.

Now is also a opportune time to implement our own mempool and kmem
cache. It's a good idea to have a certain number of frame and register
objects in reserve at all times, so that we are guaranteed to have our
allocation satisfied even when memory is scarce. Since we have pools to
allocate from we can implement the registers for each frame as a linked
list as opposed to a sparsely populated array. Whilst it's true that the
lookup time for a linked list is larger than for arrays, there's only
usually a maximum of 8 registers per frame. So the overhead isn't that
much of a concern.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/include/asm/dwarf.h |  22 ++---
 arch/sh/kernel/dwarf.c      | 201 ++++++++++++++++++++++++++++++--------------
 2 files changed, 142 insertions(+), 81 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index 2fbe8720411..a22fbe98303 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -265,10 +265,7 @@ struct dwarf_frame {
 
 	unsigned long pc;
 
-	struct dwarf_reg *regs;
-	unsigned int num_regs;	/* how many regs are allocated? */
-
-	unsigned int depth;	/* what level are we in the callstack? */
+	struct list_head reg_list;
 
 	unsigned long cfa;
 
@@ -292,22 +289,15 @@ struct dwarf_frame {
  *	@flags: Describes how to calculate the value of this register
  */
 struct dwarf_reg {
+	struct list_head link;
+
+	unsigned int number;
+
 	unsigned long addr;
 	unsigned long flags;
 #define DWARF_REG_OFFSET	(1 << 0)
 };
 
-/**
- *	dwarf_stack - a DWARF stack contains a collection of DWARF frames
- *	@depth: the number of frames in the stack
- *	@level: an array of DWARF frames, indexed by stack level
- *
- */
-struct dwarf_stack {
-	unsigned int depth;
-	struct dwarf_frame **level;
-};
-
 /*
  * Call Frame instruction opcodes.
  */
@@ -372,7 +362,7 @@ static inline unsigned int DW_CFA_operand(unsigned long insn)
 
 extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
 					      struct dwarf_frame *);
-#endif /* __ASSEMBLY__ */
+#endif /* !__ASSEMBLY__ */
 
 #define CFI_STARTPROC	.cfi_startproc
 #define CFI_ENDPROC	.cfi_endproc
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index d0652153f57..e4810375207 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/list.h>
+#include <linux/mempool.h>
 #include <linux/mm.h>
 #include <asm/dwarf.h>
 #include <asm/unwinder.h>
@@ -25,6 +26,17 @@
 #include <asm/dwarf.h>
 #include <asm/stacktrace.h>
 
+/* Reserve enough memory for two stack frames */
+#define DWARF_FRAME_MIN_REQ	2
+/* ... with 4 registers per frame. */
+#define DWARF_REG_MIN_REQ	(DWARF_FRAME_MIN_REQ * 4)
+
+static struct kmem_cache *dwarf_frame_cachep;
+static mempool_t *dwarf_frame_pool;
+
+static struct kmem_cache *dwarf_reg_cachep;
+static mempool_t *dwarf_reg_pool;
+
 static LIST_HEAD(dwarf_cie_list);
 static DEFINE_SPINLOCK(dwarf_cie_lock);
 
@@ -33,33 +45,25 @@ static DEFINE_SPINLOCK(dwarf_fde_lock);
 
 static struct dwarf_cie *cached_cie;
 
-/*
- * Figure out whether we need to allocate some dwarf registers. If dwarf
- * registers have already been allocated then we may need to realloc
- * them. "reg" is a register number that we need to be able to access
- * after this call.
+/**
+ *	dwarf_frame_alloc_reg - allocate memory for a DWARF register
+ *	@frame: the DWARF frame whose list of registers we insert on
+ *	@reg_num: the register number
+ *
+ *	Allocate space for, and initialise, a dwarf reg from
+ *	dwarf_reg_pool and insert it onto the (unsorted) linked-list of
+ *	dwarf registers for @frame.
  *
- * Register numbers start at zero, therefore we need to allocate space
- * for "reg" + 1 registers.
+ *	Return the initialised DWARF reg.
  */
-static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
-				   unsigned int reg)
+static struct dwarf_reg *dwarf_frame_alloc_reg(struct dwarf_frame *frame,
+					       unsigned int reg_num)
 {
-	struct dwarf_reg *regs;
-	unsigned int num_regs = reg + 1;
-	size_t new_size;
-	size_t old_size;
+	struct dwarf_reg *reg;
 
-	new_size = num_regs * sizeof(*regs);
-	old_size = frame->num_regs * sizeof(*regs);
-
-	/* Fast path: don't allocate any regs if we've already got enough. */
-	if (frame->num_regs >= num_regs)
-		return;
-
-	regs = kzalloc(new_size, GFP_ATOMIC);
-	if (!regs) {
-		printk(KERN_WARNING "Unable to allocate DWARF registers\n");
+	reg = mempool_alloc(dwarf_reg_pool, GFP_ATOMIC);
+	if (!reg) {
+		printk(KERN_WARNING "Unable to allocate a DWARF register\n");
 		/*
 		 * Let's just bomb hard here, we have no way to
 		 * gracefully recover.
@@ -67,13 +71,44 @@ static void dwarf_frame_alloc_regs(struct dwarf_frame *frame,
 		BUG();
 	}
 
-	if (frame->regs) {
-		memcpy(regs, frame->regs, old_size);
-		kfree(frame->regs);
+	reg->number = reg_num;
+	reg->addr = 0;
+	reg->flags = 0;
+
+	list_add(&reg->link, &frame->reg_list);
+
+	return reg;
+}
+
+static void dwarf_frame_free_regs(struct dwarf_frame *frame)
+{
+	struct dwarf_reg *reg, *n;
+
+	list_for_each_entry_safe(reg, n, &frame->reg_list, link) {
+		list_del(&reg->link);
+		mempool_free(reg, dwarf_reg_pool);
+	}
+}
+
+/**
+ *	dwarf_frame_reg - return a DWARF register
+ *	@frame: the DWARF frame to search in for @reg_num
+ *	@reg_num: the register number to search for
+ *
+ *	Lookup and return the dwarf reg @reg_num for this frame. Return
+ *	NULL if @reg_num is an register invalid number.
+ */
+static struct dwarf_reg *dwarf_frame_reg(struct dwarf_frame *frame,
+					 unsigned int reg_num)
+{
+	struct dwarf_reg *reg;
+
+	list_for_each_entry(reg, &frame->reg_list, link) {
+		if (reg->number == reg_num)
+			return reg;
 	}
 
-	frame->regs = regs;
-	frame->num_regs = num_regs;
+	return NULL;
 }
 
 /**
@@ -347,6 +382,7 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 	unsigned char insn;
 	unsigned char *current_insn;
 	unsigned int count, delta, reg, expr_len, offset;
+	struct dwarf_reg *regp;
 
 	current_insn = insn_start;
 
@@ -369,9 +405,9 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			count = dwarf_read_uleb128(current_insn, &offset);
 			current_insn += count;
 			offset *= cie->data_alignment_factor;
-			dwarf_frame_alloc_regs(frame, reg);
-			frame->regs[reg].addr = offset;
-			frame->regs[reg].flags |= DWARF_REG_OFFSET;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->addr = offset;
+			regp->flags |= DWARF_REG_OFFSET;
 			continue;
 			/* NOTREACHED */
 		case DW_CFA_restore:
@@ -453,17 +489,18 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			count = dwarf_read_leb128(current_insn, &offset);
 			current_insn += count;
 			offset *= cie->data_alignment_factor;
-			dwarf_frame_alloc_regs(frame, reg);
-			frame->regs[reg].flags |= DWARF_REG_OFFSET;
-			frame->regs[reg].addr = offset;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_REG_OFFSET;
+			regp->addr = offset;
 			break;
 		case DW_CFA_val_offset:
 			count = dwarf_read_uleb128(current_insn, &reg);
 			current_insn += count;
 			count = dwarf_read_leb128(current_insn, &offset);
 			offset *= cie->data_alignment_factor;
-			frame->regs[reg].flags |= DWARF_REG_OFFSET;
-			frame->regs[reg].addr = offset;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_REG_OFFSET;
+			regp->addr = offset;
 			break;
 		case DW_CFA_GNU_args_size:
 			count = dwarf_read_uleb128(current_insn, &offset);
@@ -474,9 +511,10 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			current_insn += count;
 			count = dwarf_read_uleb128(current_insn, &offset);
 			offset *= cie->data_alignment_factor;
-			dwarf_frame_alloc_regs(frame, reg);
-			frame->regs[reg].flags |= DWARF_REG_OFFSET;
-			frame->regs[reg].addr = -offset;
+
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_REG_OFFSET;
+			regp->addr = -offset;
 			break;
 		default:
 			pr_debug("unhandled DWARF instruction 0x%x\n", insn);
@@ -502,8 +540,8 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	struct dwarf_frame *frame;
 	struct dwarf_cie *cie;
 	struct dwarf_fde *fde;
+	struct dwarf_reg *reg;
 	unsigned long addr;
-	int i, offset;
 
 	/*
 	 * If this is the first invocation of this recursive function we
@@ -516,11 +554,16 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	if (!pc && !prev)
 		pc = (unsigned long)current_text_addr();
 
-	frame = kzalloc(sizeof(*frame), GFP_ATOMIC);
-	if (!frame)
-		return NULL;
+	frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
+	if (!frame) {
+		printk(KERN_ERR "Unable to allocate a dwarf frame\n");
+		BUG();
+	}
 
+	INIT_LIST_HEAD(&frame->reg_list);
+	frame->flags = 0;
 	frame->prev = prev;
+	frame->return_addr = 0;
 
 	fde = dwarf_lookup_fde(pc);
 	if (!fde) {
@@ -540,7 +583,7 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 		 *	case above, which sucks because we could print a
 		 *	warning here.
 		 */
-		return NULL;
+		goto bail;
 	}
 
 	cie = dwarf_lookup_cie(fde->cie_pointer);
@@ -560,10 +603,10 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	switch (frame->flags) {
 	case DWARF_FRAME_CFA_REG_OFFSET:
 		if (prev) {
-			BUG_ON(!prev->regs[frame->cfa_register].flags);
+			reg = dwarf_frame_reg(prev, frame->cfa_register);
+			BUG_ON(!reg);
 
-			addr = prev->cfa;
-			addr += prev->regs[frame->cfa_register].addr;
+			addr = prev->cfa + reg->addr;
 			frame->cfa = __raw_readl(addr);
 
 		} else {
@@ -584,23 +627,18 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	}
 
 	/* If we haven't seen the return address reg, we're screwed. */
-	BUG_ON(!frame->regs[DWARF_ARCH_RA_REG].flags);
-
-	for (i = 0; i <= frame->num_regs; i++) {
-		struct dwarf_reg *reg = &frame->regs[i];
-
-		if (!reg->flags)
-			continue;
+	reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
+	BUG_ON(!reg);
 
-		offset = reg->addr;
-		offset += frame->cfa;
-	}
-
-	addr = frame->cfa + frame->regs[DWARF_ARCH_RA_REG].addr;
+	addr = frame->cfa + reg->addr;
 	frame->return_addr = __raw_readl(addr);
 
-	frame->next = dwarf_unwind_stack(frame->return_addr, frame);
 	return frame;
+
+bail:
+	dwarf_frame_free_regs(frame);
+	mempool_free(frame, dwarf_frame_pool);
+	return NULL;
 }
 
 static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
@@ -770,14 +808,29 @@ static void dwarf_unwinder_dump(struct task_struct *task, struct pt_regs *regs,
 				unsigned long *sp,
 				const struct stacktrace_ops *ops, void *data)
 {
-	struct dwarf_frame *frame;
+	struct dwarf_frame *frame, *_frame;
+	unsigned long return_addr;
+
+	_frame = NULL;
+	return_addr = 0;
 
-	frame = dwarf_unwind_stack(0, NULL);
+	while (1) {
+		frame = dwarf_unwind_stack(return_addr, _frame);
+
+		if (_frame) {
+			dwarf_frame_free_regs(_frame);
+			mempool_free(_frame, dwarf_frame_pool);
+		}
+
+		_frame = frame;
+
+		if (!frame || !frame->return_addr)
+			break;
 
-	while (frame && frame->return_addr) {
-		ops->address(data, frame->return_addr, 1);
-		frame = frame->next;
+		return_addr = frame->return_addr;
+		ops->address(data, return_addr, 1);
 	}
+
 }
 
 static struct unwinder dwarf_unwinder = {
@@ -801,6 +854,9 @@ static void dwarf_unwinder_cleanup(void)
 
 	list_for_each_entry(fde, &dwarf_fde_list, link)
 		kfree(fde);
+
+	kmem_cache_destroy(dwarf_reg_cachep);
+	kmem_cache_destroy(dwarf_frame_cachep);
 }
 
 /**
@@ -827,6 +883,21 @@ static int __init dwarf_unwinder_init(void)
 	f_entries = 0;
 	entry = &__start_eh_frame;
 
+	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
+			sizeof(struct dwarf_frame), 0, SLAB_PANIC, NULL);
+	dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
+			sizeof(struct dwarf_reg), 0, SLAB_PANIC, NULL);
+
+	dwarf_frame_pool = mempool_create(DWARF_FRAME_MIN_REQ,
+					  mempool_alloc_slab,
+					  mempool_free_slab,
+					  dwarf_frame_cachep);
+
+	dwarf_reg_pool = mempool_create(DWARF_REG_MIN_REQ,
+					 mempool_alloc_slab,
+					 mempool_free_slab,
+					 dwarf_reg_cachep);
+
 	while ((char *)entry < __stop_eh_frame) {
 		p = entry;
 
-- 
cgit v1.2.3


From 97efbbd5886e27b61c19c77d41f6491f5d96fbd0 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 16 Aug 2009 15:56:35 +0100
Subject: sh: unwinder: Set the flags for DW_CFA_val_offset ops as
 DWARF_VAL_OFFSET

The handling of DW_CFA_val_offset ops was incorrectly using the
DWARF_REG_OFFSET flag but the register's value cannot be calculated
using the DWARF_REG_OFFSET method. Create a new flag to indicate that a
different method must be used to calculate the register's value even
though there is no implementation for DWARF_VAL_OFFSET yet; it's mainly
just a place holder.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/include/asm/dwarf.h | 1 +
 arch/sh/kernel/dwarf.c      | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index a22fbe98303..8b0bcc08738 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -296,6 +296,7 @@ struct dwarf_reg {
 	unsigned long addr;
 	unsigned long flags;
 #define DWARF_REG_OFFSET	(1 << 0)
+#define DWARF_VAL_OFFSET	(1 << 1)
 };
 
 /*
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index e4810375207..d271d04adcc 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -11,6 +11,7 @@
  *
  * TODO:
  *	- DWARF64 doesn't work.
+ *	- Registers with DWARF_VAL_OFFSET rules aren't handled properly.
  */
 
 /* #define DEBUG */
@@ -499,7 +500,7 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			count = dwarf_read_leb128(current_insn, &offset);
 			offset *= cie->data_alignment_factor;
 			regp = dwarf_frame_alloc_reg(frame, reg);
-			regp->flags |= DWARF_REG_OFFSET;
+			regp->flags |= DWARF_VAL_OFFSET;
 			regp->addr = offset;
 			break;
 		case DW_CFA_GNU_args_size:
-- 
cgit v1.2.3


From b344e24a8e8ceda83d1285d22e3e5baf4f5e42d3 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Sun, 16 Aug 2009 21:54:48 +0100
Subject: sh: unwinder: Introduce UNWINDER_BUG() and UNWINDER_BUG_ON()

We can't assume that if we execute the unwinder code and the unwinder
was already running that it has faulted. Clearly two kernel threads can
invoke the unwinder at the same time and may be running simultaneously.

The previous approach used BUG() and BUG_ON() in the unwinder code to
detect whether the unwinder was incapable of unwinding the stack, and
that the next available unwinder should be used instead. A better
approach is to explicitly invoke a trap handler to switch unwinders when
the current unwinder cannot continue.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/include/asm/bug.h      | 25 +++++++++++++++++++++++++
 arch/sh/include/asm/system.h   |  5 +++++
 arch/sh/include/asm/unwinder.h |  6 ++++++
 arch/sh/kernel/debugtraps.S    |  6 +++++-
 arch/sh/kernel/dwarf.c         | 38 +++++++++++++++++++++-----------------
 arch/sh/kernel/traps.c         |  7 +++++--
 arch/sh/kernel/traps_32.c      |  1 +
 arch/sh/kernel/unwinder.c      | 33 +++++++++++++++++++++++++++------
 8 files changed, 95 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
index c0171804016..b7d9822fd6c 100644
--- a/arch/sh/include/asm/bug.h
+++ b/arch/sh/include/asm/bug.h
@@ -1,6 +1,7 @@
 #ifndef __ASM_SH_BUG_H
 #define __ASM_SH_BUG_H
 
+#define TRAPA_UNWINDER_BUG_OPCODE 0xc33b /* trapa #0x3b */
 #define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
 
 #ifdef CONFIG_GENERIC_BUG
@@ -72,6 +73,30 @@ do {							\
 	unlikely(__ret_warn_on);				\
 })
 
+#define UNWINDER_BUG()						\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		_EMIT_BUG_ENTRY		\
+		 :					\
+		 : "n" (TRAPA_UNWINDER_BUG_OPCODE),	\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__), "i" (0),		\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define UNWINDER_BUG_ON(x) ({					\
+	int __ret_unwinder_on = !!(x);				\
+	if (__builtin_constant_p(__ret_unwinder_on)) {		\
+		if (__ret_unwinder_on)				\
+			UNWINDER_BUG();				\
+	} else {						\
+		if (unlikely(__ret_unwinder_on))		\
+			UNWINDER_BUG();				\
+	}							\
+	unlikely(__ret_unwinder_on);				\
+})
+
 #endif /* CONFIG_GENERIC_BUG */
 
 #include <asm-generic/bug.h>
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index ab79e1f4fbe..f9e2ceb94d9 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -181,6 +181,11 @@ BUILD_TRAP_HANDLER(breakpoint);
 BUILD_TRAP_HANDLER(singlestep);
 BUILD_TRAP_HANDLER(fpu_error);
 BUILD_TRAP_HANDLER(fpu_state_restore);
+BUILD_TRAP_HANDLER(unwinder);
+
+#ifdef CONFIG_BUG
+extern void handle_BUG(struct pt_regs *);
+#endif
 
 #define arch_align_stack(x) (x)
 
diff --git a/arch/sh/include/asm/unwinder.h b/arch/sh/include/asm/unwinder.h
index 3dc551453e2..1e65c07b3e1 100644
--- a/arch/sh/include/asm/unwinder.h
+++ b/arch/sh/include/asm/unwinder.h
@@ -22,4 +22,10 @@ extern void stack_reader_dump(struct task_struct *, struct pt_regs *,
 			      unsigned long *, const struct stacktrace_ops *,
 			      void *);
 
+/*
+ * Used by fault handling code to signal to the unwinder code that it
+ * should switch to a different unwinder.
+ */
+extern int unwinder_faulted;
+
 #endif /* _LINUX_UNWINDER_H */
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
index 591741383ee..cb00e4a82d4 100644
--- a/arch/sh/kernel/debugtraps.S
+++ b/arch/sh/kernel/debugtraps.S
@@ -19,6 +19,10 @@
 
 #if !defined(CONFIG_SH_STANDARD_BIOS)
 #define sh_bios_handler			debug_trap_handler
+#endif
+
+#if !defined(CONFIG_DWARF_UNWINDER)
+#define unwinder_trap_handler		debug_trap_handler
 #endif
 
 	.data
@@ -35,7 +39,7 @@ ENTRY(debug_trap_table)
 	.long debug_trap_handler	/* 0x38 */
 	.long debug_trap_handler	/* 0x39 */
 	.long debug_trap_handler	/* 0x3a */
-	.long debug_trap_handler	/* 0x3b */
+	.long unwinder_trap_handler	/* 0x3b */
 	.long breakpoint_trap_handler	/* 0x3c */
 	.long singlestep_trap_handler	/* 0x3d */
 	.long bug_trap_handler		/* 0x3e */
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index d271d04adcc..606ece37eb4 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -69,7 +69,7 @@ static struct dwarf_reg *dwarf_frame_alloc_reg(struct dwarf_frame *frame,
 		 * Let's just bomb hard here, we have no way to
 		 * gracefully recover.
 		 */
-		BUG();
+		UNWINDER_BUG();
 	}
 
 	reg->number = reg_num;
@@ -232,7 +232,7 @@ static int dwarf_read_encoded_value(char *addr, unsigned long *val,
 		break;
 	default:
 		pr_debug("encoding=0x%x\n", (encoding & 0x70));
-		BUG();
+		UNWINDER_BUG();
 	}
 
 	if ((encoding & 0x07) == 0x00)
@@ -247,7 +247,7 @@ static int dwarf_read_encoded_value(char *addr, unsigned long *val,
 		break;
 	default:
 		pr_debug("encoding=0x%x\n", encoding);
-		BUG();
+		UNWINDER_BUG();
 	}
 
 	return count;
@@ -519,6 +519,7 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 			break;
 		default:
 			pr_debug("unhandled DWARF instruction 0x%x\n", insn);
+			UNWINDER_BUG();
 			break;
 		}
 	}
@@ -535,8 +536,8 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
  *	on the callstack. Each of the lower (older) stack frames are
  *	linked via the "prev" member.
  */
-struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
-				       struct dwarf_frame *prev)
+struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
+					struct dwarf_frame *prev)
 {
 	struct dwarf_frame *frame;
 	struct dwarf_cie *cie;
@@ -558,7 +559,7 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
 	if (!frame) {
 		printk(KERN_ERR "Unable to allocate a dwarf frame\n");
-		BUG();
+		UNWINDER_BUG();
 	}
 
 	INIT_LIST_HEAD(&frame->reg_list);
@@ -605,7 +606,8 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 	case DWARF_FRAME_CFA_REG_OFFSET:
 		if (prev) {
 			reg = dwarf_frame_reg(prev, frame->cfa_register);
-			BUG_ON(!reg);
+			UNWINDER_BUG_ON(!reg);
+			UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
 
 			addr = prev->cfa + reg->addr;
 			frame->cfa = __raw_readl(addr);
@@ -624,12 +626,13 @@ struct dwarf_frame *dwarf_unwind_stack(unsigned long pc,
 		frame->cfa += frame->cfa_offset;
 		break;
 	default:
-		BUG();
+		UNWINDER_BUG();
 	}
 
 	/* If we haven't seen the return address reg, we're screwed. */
 	reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
-	BUG_ON(!reg);
+	UNWINDER_BUG_ON(!reg);
+	UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
 
 	addr = frame->cfa + reg->addr;
 	frame->return_addr = __raw_readl(addr);
@@ -664,7 +667,7 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 	cie->cie_pointer = (unsigned long)entry;
 
 	cie->version = *(char *)p++;
-	BUG_ON(cie->version != 1);
+	UNWINDER_BUG_ON(cie->version != 1);
 
 	cie->augmentation = p;
 	p += strlen(cie->augmentation) + 1;
@@ -694,7 +697,7 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 		count = dwarf_read_uleb128(p, &length);
 		p += count;
 
-		BUG_ON((unsigned char *)p > end);
+		UNWINDER_BUG_ON((unsigned char *)p > end);
 
 		cie->initial_instructions = p + length;
 		cie->augmentation++;
@@ -722,16 +725,16 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 			 * routine in the CIE
 			 * augmentation.
 			 */
-			BUG();
+			UNWINDER_BUG();
 		} else if (*cie->augmentation == 'S') {
-			BUG();
+			UNWINDER_BUG();
 		} else {
 			/*
 			 * Unknown augmentation. Assume
 			 * 'z' augmentation.
 			 */
 			p = cie->initial_instructions;
-			BUG_ON(!p);
+			UNWINDER_BUG_ON(!p);
 			break;
 		}
 	}
@@ -805,9 +808,11 @@ static int dwarf_parse_fde(void *entry, u32 entry_type,
 	return 0;
 }
 
-static void dwarf_unwinder_dump(struct task_struct *task, struct pt_regs *regs,
+static void dwarf_unwinder_dump(struct task_struct *task,
+				struct pt_regs *regs,
 				unsigned long *sp,
-				const struct stacktrace_ops *ops, void *data)
+				const struct stacktrace_ops *ops,
+				void *data)
 {
 	struct dwarf_frame *frame, *_frame;
 	unsigned long return_addr;
@@ -831,7 +836,6 @@ static void dwarf_unwinder_dump(struct task_struct *task, struct pt_regs *regs,
 		return_addr = frame->return_addr;
 		ops->address(data, return_addr, 1);
 	}
-
 }
 
 static struct unwinder dwarf_unwinder = {
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index b3e0067db35..881b9a32b7d 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -8,7 +8,7 @@
 #include <asm/system.h>
 
 #ifdef CONFIG_BUG
-static void handle_BUG(struct pt_regs *regs)
+void handle_BUG(struct pt_regs *regs)
 {
 	enum bug_trap_type tt;
 	tt = report_bug(regs->pc, regs);
@@ -29,7 +29,10 @@ int is_valid_bugaddr(unsigned long addr)
 	if (probe_kernel_address((insn_size_t *)addr, opcode))
 		return 0;
 
-	return opcode == TRAPA_BUG_OPCODE;
+	if (opcode == TRAPA_BUG_OPCODE || opcode == TRAPA_UNWINDER_BUG_OPCODE)
+		return 1;
+
+	return 0;
 }
 #endif
 
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 563426487c6..05a04b6df84 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -136,6 +136,7 @@ static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
 			regs->pc = fixup->fixup;
 			return;
 		}
+
 		die(str, regs, err);
 	}
 }
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
index 2b30fa28b44..b9c122abe25 100644
--- a/arch/sh/kernel/unwinder.c
+++ b/arch/sh/kernel/unwinder.c
@@ -53,8 +53,6 @@ static struct list_head unwinder_list = {
 
 static DEFINE_SPINLOCK(unwinder_lock);
 
-static atomic_t unwinder_running = ATOMIC_INIT(0);
-
 /**
  * select_unwinder - Select the best registered stack unwinder.
  *
@@ -122,6 +120,8 @@ int unwinder_register(struct unwinder *u)
 	return ret;
 }
 
+int unwinder_faulted = 0;
+
 /*
  * Unwind the call stack and pass information to the stacktrace_ops
  * functions. Also handle the case where we need to switch to a new
@@ -144,19 +144,40 @@ void unwind_stack(struct task_struct *task, struct pt_regs *regs,
 	 * Hopefully this will give us a semi-reliable stacktrace so we
 	 * can diagnose why curr_unwinder->dump() faulted.
 	 */
-	if (atomic_inc_return(&unwinder_running) != 1) {
+	if (unwinder_faulted) {
 		spin_lock_irqsave(&unwinder_lock, flags);
 
-		if (!list_is_singular(&unwinder_list)) {
+		/* Make sure no one beat us to changing the unwinder */
+		if (unwinder_faulted && !list_is_singular(&unwinder_list)) {
 			list_del(&curr_unwinder->list);
 			curr_unwinder = select_unwinder();
+
+			unwinder_faulted = 0;
 		}
 
 		spin_unlock_irqrestore(&unwinder_lock, flags);
-		atomic_dec(&unwinder_running);
 	}
 
 	curr_unwinder->dump(task, regs, sp, ops, data);
+}
+
+/*
+ * Trap handler for UWINDER_BUG() statements. We must switch to the
+ * unwinder with the next highest rating.
+ */
+BUILD_TRAP_HANDLER(unwinder)
+{
+	insn_size_t insn;
+	TRAP_HANDLER_DECL;
+
+	/* Rewind */
+	regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
+	insn = *(insn_size_t *)instruction_pointer(regs);
+
+	/* Switch unwinders when unwind_stack() is called */
+	unwinder_faulted = 1;
 
-	atomic_dec(&unwinder_running);
+#ifdef CONFIG_BUG
+	handle_BUG(regs);
+#endif
 }
-- 
cgit v1.2.3


From fe98dd31eb9fe055703e0171134b4d074558d4e9 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 20 Aug 2009 17:00:21 +0100
Subject: sh: Setup the frame pointer in handle_interrupt

When CONFIG_DWARF_UNWINDER is enabled setup r14 in handle_interrupt, so
that we can figure out what function was running when we were
interrupted.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/kernel/cpu/sh3/entry.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 67ad6467c69..f89ec87e3fc 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -508,6 +508,8 @@ ENTRY(handle_interrupt)
 	bsr	save_regs	! needs original pr value in k3
 	 mov	#-1, k2		! default vector kept in k2
 
+	setup_frame_reg
+
 	! Setup return address and jump to do_IRQ
 	mov.l	4f, r9		! fetch return address
 	lds	r9, pr		! put return address in pr
-- 
cgit v1.2.3


From 5480675dc60c7dda7146e506981b2b40a775cc1e Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 20 Aug 2009 19:42:34 +0100
Subject: sh: Fix bug calculating the end of the FDE instructions

The 'end' member of struct dwarf_fde denotes one byte past the end of
the CFA instruction stream for an FDE. The value of 'end' was being
calcualted incorrectly, it was being set too high. This resulted in
dwarf_cfa_execute_insns() interpreting data past the end of valid
instructions, thus causing all sorts of weird crashes.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/kernel/dwarf.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 606ece37eb4..e6f427cff5b 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -751,7 +751,8 @@ static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
 }
 
 static int dwarf_parse_fde(void *entry, u32 entry_type,
-			   void *start, unsigned long len)
+			   void *start, unsigned long len,
+			   unsigned char *end)
 {
 	struct dwarf_fde *fde;
 	struct dwarf_cie *cie;
@@ -798,7 +799,7 @@ static int dwarf_parse_fde(void *entry, u32 entry_type,
 
 	/* Call frame instructions. */
 	fde->instructions = p;
-	fde->end = start + len;
+	fde->end = end;
 
 	/* Add to list. */
 	spin_lock_irqsave(&dwarf_fde_lock, flags);
@@ -932,7 +933,7 @@ static int __init dwarf_unwinder_init(void)
 			else
 				c_entries++;
 		} else {
-			err = dwarf_parse_fde(entry, entry_type, p, len);
+			err = dwarf_parse_fde(entry, entry_type, p, len, end);
 			if (err < 0)
 				goto out;
 			else
-- 
cgit v1.2.3


From 5580e9044df9c0e87861739d8c527006ead92e52 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Thu, 20 Aug 2009 19:53:49 +0100
Subject: sh: Handle the DWARF op, DW_CFA_undefined

Allow a DWARF register to have an undefined value. When applied to the
DWARF return address register this lets lets us label a function as
having no direct caller, e.g. kernel_thread_helper().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
---
 arch/sh/include/asm/dwarf.h |  3 +++
 arch/sh/kernel/dwarf.c      | 13 +++++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index 8b0bcc08738..c367ed3373c 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -297,6 +297,7 @@ struct dwarf_reg {
 	unsigned long flags;
 #define DWARF_REG_OFFSET	(1 << 0)
 #define DWARF_VAL_OFFSET	(1 << 1)
+#define DWARF_UNDEFINED		(1 << 2)
 };
 
 /*
@@ -370,6 +371,7 @@ extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
 #define CFI_DEF_CFA	.cfi_def_cfa
 #define CFI_REGISTER	.cfi_register
 #define CFI_REL_OFFSET	.cfi_rel_offset
+#define CFI_UNDEFINED	.cfi_undefined
 
 #else
 
@@ -383,6 +385,7 @@ extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
 #define CFI_DEF_CFA	CFI_IGNORE
 #define CFI_REGISTER	CFI_IGNORE
 #define CFI_REL_OFFSET	CFI_IGNORE
+#define CFI_UNDEFINED	CFI_IGNORE
 
 #ifndef __ASSEMBLY__
 static inline void dwarf_unwinder_init(void)
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index e6f427cff5b..577302f31e6 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -452,6 +452,8 @@ static int dwarf_cfa_execute_insns(unsigned char *insn_start,
 		case DW_CFA_undefined:
 			count = dwarf_read_uleb128(current_insn, &reg);
 			current_insn += count;
+			regp = dwarf_frame_alloc_reg(frame, reg);
+			regp->flags |= DWARF_UNDEFINED;
 			break;
 		case DW_CFA_def_cfa:
 			count = dwarf_read_uleb128(current_insn,
@@ -629,9 +631,16 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 		UNWINDER_BUG();
 	}
 
-	/* If we haven't seen the return address reg, we're screwed. */
 	reg = dwarf_frame_reg(frame, DWARF_ARCH_RA_REG);
-	UNWINDER_BUG_ON(!reg);
+
+	/*
+	 * If we haven't seen the return address register or the return
+	 * address column is undefined then we must assume that this is
+	 * the end of the callstack.
+	 */
+	if (!reg || reg->flags == DWARF_UNDEFINED)
+		goto bail;
+
 	UNWINDER_BUG_ON(reg->flags != DWARF_REG_OFFSET);
 
 	addr = frame->cfa + reg->addr;
-- 
cgit v1.2.3


From 8126dec32738421afa362114337331337b4be17f Mon Sep 17 00:00:00 2001
From: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Date: Thu, 20 Aug 2009 20:23:11 +0800
Subject: x86: Fix system crash when loading with "reservetop" parameter

The system will die if the kernel is booted with "reservetop"
parameter, in present code, parse "reservetop" parameter after
early_ioremap_init(), and some function still use
early_ioremap() after it.

The problem is, "reservetop" parameter can modify
'FIXADDR_TOP', then the virtual address got by early_ioremap()
is base on old 'FIXADDR_TOP', but the page mapping is base on
new 'FIXADDR_TOP', it will occur page fault, and the IDT is not
prepare yet, so, the system is dead.

So, put parse_early_param() in the front of
early_ioremap_init() in this patch.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: yinghai@kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A8D402F.4080805@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 63f32d220ef..02643cc3bf2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -711,6 +711,11 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	parse_early_param();
+
 	/* VMI may relocate the fixmap; do this before touching ioremap area */
 	vmi_init();
 
@@ -793,11 +798,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	parse_early_param();
-
 #ifdef CONFIG_X86_64
 	check_efer();
 #endif
-- 
cgit v1.2.3


From 3e0e1e9c5a327d4dba8490d83ef55c0564e6e8a7 Mon Sep 17 00:00:00 2001
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 21 Aug 2009 04:34:45 -0400
Subject: x86: Fix an incorrect argument of reserve_bootmem()

This line looks suspicious, because if this is true, then the
'flags' parameter of function reserve_bootmem_generic() will be
unused when !CONFIG_NUMA. I don't think this is what we want.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: akpm@linux-foundation.org
LKML-Reference: <20090821083709.5098.52505.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 6176fe8f29e..ea56b8cbb6a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -796,7 +796,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
 		return ret;
 
 #else
-	reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+	reserve_bootmem(phys, len, flags);
 #endif
 
 	if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
-- 
cgit v1.2.3


From 83d349f35e1ae72268c5104dbf9ab2ae635425d4 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 21 Aug 2009 09:23:57 -0700
Subject: x86: don't send an IPI to the empty set of CPU's
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The default_send_IPI_mask_logical() function uses the "flat" APIC mode
to send an IPI to a set of CPU's at once, but if that set happens to be
empty, some older local APIC's will apparently be rather unhappy.  So
just warn if a caller gives us an empty mask, and ignore it.

This fixes a regression in 2.6.30.x, due to commit 4595f9620 ("x86:
change flush_tlb_others to take a const struct cpumask"), documented
here:

	http://bugzilla.kernel.org/show_bug.cgi?id=13933

which causes a silent lock-up.  It only seems to happen on PPro, P2, P3
and Athlon XP cores.  Most developers sadly (or not so sadly, if you're
a developer..) have more modern CPU's.  Also, on x86-64 we don't use the
flat APIC mode, so it would never trigger there even if the APIC didn't
like sending an empty IPI mask.

Reported-by: Pavel Vilim <wylda@volny.cz>
Reported-and-tested-by: Thomas Björnell <thomas.bjornell@gmail.com>
Reported-and-tested-by: Martin Rogge <marogge@onlinehome.de>
Cc: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/apic/ipi.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index dbf5445727a..6ef00ba4c88 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -106,6 +106,9 @@ void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector)
 	unsigned long mask = cpumask_bits(cpumask)[0];
 	unsigned long flags;
 
+	if (WARN_ONCE(!mask, "empty IPI mask"))
+		return;
+
 	local_irq_save(flags);
 	WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]);
 	__default_send_IPI_dest_field(mask, vector, apic->dest_logical);
-- 
cgit v1.2.3


From b04e6373d694e977c95ae0ae000e2c1e2cf92d73 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 21 Aug 2009 09:48:10 -0700
Subject: x86: don't call '->send_IPI_mask()' with an empty mask
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

As noted in 83d349f35e1ae72268c5104dbf9ab2ae635425d4 ("x86: don't send
an IPI to the empty set of CPU's"), some APIC's will be very unhappy
with an empty destination mask.  That commit added a WARN_ON() for that
case, and avoided the resulting problem, but didn't fix the underlying
reason for why those empty mask cases happened.

This fixes that, by checking the result of 'cpumask_andnot()' of the
current CPU actually has any other CPU's left in the set of CPU's to be
sent a TLB flush, and not calling down to the IPI code if the mask is
empty.

The reason this started happening at all is that we started passing just
the CPU mask pointers around in commit 4595f9620 ("x86: change
flush_tlb_others to take a const struct cpumask"), and when we did that,
the cpumask was no longer thread-local.

Before that commit, flush_tlb_mm() used to create it's own copy of
'mm->cpu_vm_mask' and pass that copy down to the low-level flush
routines after having tested that it was not empty.  But after changing
it to just pass down the CPU mask pointer, the lower level TLB flush
routines would now get a pointer to that 'mm->cpu_vm_mask', and that
could still change - and become empty - after the test due to other
CPU's having flushed their own TLB's.

See

	http://bugzilla.kernel.org/show_bug.cgi?id=13933

for details.

Tested-by: Thomas Björnell <thomas.bjornell@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/tlb.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 821e97017e9..c814e144a3f 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -183,18 +183,17 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask,
 
 	f->flush_mm = mm;
 	f->flush_va = va;
-	cpumask_andnot(to_cpumask(f->flush_cpumask),
-		       cpumask, cpumask_of(smp_processor_id()));
-
-	/*
-	 * We have to send the IPI only to
-	 * CPUs affected.
-	 */
-	apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
-		      INVALIDATE_TLB_VECTOR_START + sender);
+	if (cpumask_andnot(to_cpumask(f->flush_cpumask), cpumask, cpumask_of(smp_processor_id()))) {
+		/*
+		 * We have to send the IPI only to
+		 * CPUs affected.
+		 */
+		apic->send_IPI_mask(to_cpumask(f->flush_cpumask),
+			      INVALIDATE_TLB_VECTOR_START + sender);
 
-	while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
-		cpu_relax();
+		while (!cpumask_empty(to_cpumask(f->flush_cpumask)))
+			cpu_relax();
+	}
 
 	f->flush_mm = NULL;
 	f->flush_va = 0;
-- 
cgit v1.2.3


From 4ab8f241f6d510470c15b62ac10f6905ff5c97bd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 22 Aug 2009 03:43:15 +0900
Subject: sh: Export unwind_stack() to satisfy modular oprofile.

If the oprofile code is built as a module, unwind_stack() as used by the
oprofile backtrace code is not available, causing build breakage.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/unwinder.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
index 2b30fa28b44..5f56ff3f55e 100644
--- a/arch/sh/kernel/unwinder.c
+++ b/arch/sh/kernel/unwinder.c
@@ -11,6 +11,7 @@
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
+#include <linux/module.h>
 #include <asm/unwinder.h>
 #include <asm/atomic.h>
 
@@ -160,3 +161,4 @@ void unwind_stack(struct task_struct *task, struct pt_regs *regs,
 
 	atomic_dec(&unwinder_running);
 }
+EXPORT_SYMBOL_GPL(unwind_stack);
-- 
cgit v1.2.3


From 8cab02dc3c58a12235c6d463ce684dded9696848 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 18:19:45 +0200
Subject: x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdown

This basically reverts commit 1a0c009ac (x86: unregister PIT
clocksource when PIT is disabled) because the problem which was tried
to address with that patch has been solved by commit 3f68535ada
(clocksource: sanity check sysfs clocksource changes).

The problem addressed by the original patch is that PIT could be
selected as clocksource after the system switched the PIT off or set
the PIT into one shot mode which would result in complete timekeeping
wreckage.

Now with the sysfs sanity check in place PIT cannot be selected again
when the system is in oneshot mode. The system will not switch to one
shot mode as long as PIT is installed because PIT is not suitable for
one shot.

The shutdown case which happens when the lapic timer is installed is
covered by the fact that init_pit_clocksource() is called after the
lapic timer take over and then does not install the PIT clocksource
at all.

We should have done the sanity checks back then, but ...

This also solves the locking problem which was reported vs. the
clocksource rework.

LKML-Reference: <new-submission>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/i8253.c | 19 -------------------
 1 file changed, 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/i8253.c b/arch/x86/kernel/i8253.c
index 5cf36c053ac..23c167925a5 100644
--- a/arch/x86/kernel/i8253.c
+++ b/arch/x86/kernel/i8253.c
@@ -19,12 +19,6 @@
 DEFINE_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
-#ifdef CONFIG_X86_32
-static void pit_disable_clocksource(void);
-#else
-static inline void pit_disable_clocksource(void) { }
-#endif
-
 /*
  * HPET replaces the PIT, when enabled. So we need to know, which of
  * the two timers is used
@@ -57,12 +51,10 @@ static void init_pit_timer(enum clock_event_mode mode,
 			outb_pit(0, PIT_CH0);
 			outb_pit(0, PIT_CH0);
 		}
-		pit_disable_clocksource();
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* One shot setup */
-		pit_disable_clocksource();
 		outb_pit(0x38, PIT_MODE);
 		break;
 
@@ -200,17 +192,6 @@ static struct clocksource pit_cs = {
 	.shift		= 20,
 };
 
-static void pit_disable_clocksource(void)
-{
-	/*
-	 * Use mult to check whether it is registered or not
-	 */
-	if (pit_cs.mult) {
-		clocksource_unregister(&pit_cs);
-		pit_cs.mult = 0;
-	}
-}
-
 static int __init init_pit_clocksource(void)
 {
 	 /*
-- 
cgit v1.2.3


From da15cfdae03351c689736f8d142618592e3cebc3 Mon Sep 17 00:00:00 2001
From: john stultz <johnstul@us.ibm.com>
Date: Wed, 19 Aug 2009 19:13:34 -0700
Subject: time: Introduce CLOCK_REALTIME_COARSE

After talking with some application writers who want very fast, but not
fine-grained timestamps, I decided to try to implement new clock_ids
to clock_gettime(): CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE
which returns the time at the last tick. This is very fast as we don't
have to access any hardware (which can be very painful if you're using
something like the acpi_pm clocksource), and we can even use the vdso
clock_gettime() method to avoid the syscall. The only trade off is you
only get low-res tick grained time resolution.

This isn't a new idea, I know Ingo has a patch in the -rt tree that made
the vsyscall gettimeofday() return coarse grained time when the
vsyscall64 sysctrl was set to 2. However this affects all applications
on a system.

With this method, applications can choose the proper speed/granularity
trade-off for themselves.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: nikolag@ca.ibm.com
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: arjan@infradead.org
Cc: jonathan@jonmasters.org
LKML-Reference: <1250734414.6897.5.camel@localhost.localdomain>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/vgtod.h   |  1 +
 arch/x86/kernel/vsyscall_64.c  |  1 +
 arch/x86/vdso/vclock_gettime.c | 39 ++++++++++++++++++++++++++++++++++++---
 3 files changed, 38 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h
index dc27a69e5d2..3d61e204826 100644
--- a/arch/x86/include/asm/vgtod.h
+++ b/arch/x86/include/asm/vgtod.h
@@ -21,6 +21,7 @@ struct vsyscall_gtod_data {
 		u32	shift;
 	} clock;
 	struct timespec wall_to_monotonic;
+	struct timespec wall_time_coarse;
 };
 extern struct vsyscall_gtod_data __vsyscall_gtod_data
 __section_vsyscall_gtod_data;
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 25ee06a80aa..cf53a78e2dc 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -87,6 +87,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
 	vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
 	vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
 	vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
+	vsyscall_gtod_data.wall_time_coarse = __current_kernel_time();
 	write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
 }
 
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 6a40b78b46a..ee55754cc3c 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -86,14 +86,47 @@ notrace static noinline int do_monotonic(struct timespec *ts)
 	return 0;
 }
 
+notrace static noinline int do_realtime_coarse(struct timespec *ts)
+{
+	unsigned long seq;
+	do {
+		seq = read_seqbegin(&gtod->lock);
+		ts->tv_sec = gtod->wall_time_coarse.tv_sec;
+		ts->tv_nsec = gtod->wall_time_coarse.tv_nsec;
+	} while (unlikely(read_seqretry(&gtod->lock, seq)));
+	return 0;
+}
+
+notrace static noinline int do_monotonic_coarse(struct timespec *ts)
+{
+	unsigned long seq, ns, secs;
+	do {
+		seq = read_seqbegin(&gtod->lock);
+		secs = gtod->wall_time_coarse.tv_sec;
+		ns = gtod->wall_time_coarse.tv_nsec;
+		secs += gtod->wall_to_monotonic.tv_sec;
+		ns += gtod->wall_to_monotonic.tv_nsec;
+	} while (unlikely(read_seqretry(&gtod->lock, seq)));
+	vset_normalized_timespec(ts, secs, ns);
+	return 0;
+}
+
 notrace int __vdso_clock_gettime(clockid_t clock, struct timespec *ts)
 {
-	if (likely(gtod->sysctl_enabled && gtod->clock.vread))
+	if (likely(gtod->sysctl_enabled))
 		switch (clock) {
 		case CLOCK_REALTIME:
-			return do_realtime(ts);
+			if (likely(gtod->clock.vread))
+				return do_realtime(ts);
+			break;
 		case CLOCK_MONOTONIC:
-			return do_monotonic(ts);
+			if (likely(gtod->clock.vread))
+				return do_monotonic(ts);
+			break;
+		case CLOCK_REALTIME_COARSE:
+			return do_realtime_coarse(ts);
+		case CLOCK_MONOTONIC_COARSE:
+			return do_monotonic_coarse(ts);
 		}
 	return vdso_fallback_gettime(clock, ts);
 }
-- 
cgit v1.2.3


From e115f2c17cbceee93b34d787a7a4a867fc73e7b4 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 22 Aug 2009 05:28:25 +0900
Subject: sh: unwinder: Use a special bug flag for unwinder traps.

This simplifies the unwinder trap handling, dropping the use of the
special trapa vector and simply piggybacking on top of the BUG support. A
new BUGFLAG_UNWINDER is added for flagging the unwinder fault, before
continuing on with regular BUG dispatch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/bug.h   | 11 ++++++-----
 arch/sh/kernel/debugtraps.S |  6 +-----
 arch/sh/kernel/traps.c      | 21 +++++++++++++++++----
 arch/sh/kernel/unwinder.c   | 21 ---------------------
 4 files changed, 24 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
index b7d9822fd6c..23c5504a3a0 100644
--- a/arch/sh/include/asm/bug.h
+++ b/arch/sh/include/asm/bug.h
@@ -1,8 +1,8 @@
 #ifndef __ASM_SH_BUG_H
 #define __ASM_SH_BUG_H
 
-#define TRAPA_UNWINDER_BUG_OPCODE 0xc33b /* trapa #0x3b */
 #define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
+#define BUGFLAG_UNWINDER	(1 << 1)
 
 #ifdef CONFIG_GENERIC_BUG
 #define HAVE_ARCH_BUG
@@ -73,15 +73,16 @@ do {							\
 	unlikely(__ret_warn_on);				\
 })
 
-#define UNWINDER_BUG()						\
+#define UNWINDER_BUG()					\
 do {							\
 	__asm__ __volatile__ (				\
 		"1:\t.short %O0\n"			\
-		_EMIT_BUG_ENTRY		\
+		_EMIT_BUG_ENTRY				\
 		 :					\
-		 : "n" (TRAPA_UNWINDER_BUG_OPCODE),	\
+		 : "n" (TRAPA_BUG_OPCODE),		\
 		   "i" (__FILE__),			\
-		   "i" (__LINE__), "i" (0),		\
+		   "i" (__LINE__),			\
+		   "i" (BUGFLAG_UNWINDER),		\
 		   "i" (sizeof(struct bug_entry)));	\
 } while (0)
 
diff --git a/arch/sh/kernel/debugtraps.S b/arch/sh/kernel/debugtraps.S
index cb00e4a82d4..591741383ee 100644
--- a/arch/sh/kernel/debugtraps.S
+++ b/arch/sh/kernel/debugtraps.S
@@ -19,10 +19,6 @@
 
 #if !defined(CONFIG_SH_STANDARD_BIOS)
 #define sh_bios_handler			debug_trap_handler
-#endif
-
-#if !defined(CONFIG_DWARF_UNWINDER)
-#define unwinder_trap_handler		debug_trap_handler
 #endif
 
 	.data
@@ -39,7 +35,7 @@ ENTRY(debug_trap_table)
 	.long debug_trap_handler	/* 0x38 */
 	.long debug_trap_handler	/* 0x39 */
 	.long debug_trap_handler	/* 0x3a */
-	.long unwinder_trap_handler	/* 0x3b */
+	.long debug_trap_handler	/* 0x3b */
 	.long breakpoint_trap_handler	/* 0x3c */
 	.long singlestep_trap_handler	/* 0x3d */
 	.long bug_trap_handler		/* 0x3e */
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index 881b9a32b7d..f69bd968fcc 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -5,18 +5,32 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
+#include <asm/unwinder.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_BUG
 void handle_BUG(struct pt_regs *regs)
 {
+	const struct bug_entry *bug;
+	unsigned long bugaddr = regs->pc;
 	enum bug_trap_type tt;
-	tt = report_bug(regs->pc, regs);
+
+	if (!is_valid_bugaddr(bugaddr))
+		goto invalid;
+
+	bug = find_bug(bugaddr);
+
+	/* Switch unwinders when unwind_stack() is called */
+	if (bug->flags & BUGFLAG_UNWINDER)
+		unwinder_faulted = 1;
+
+	tt = report_bug(bugaddr, regs);
 	if (tt == BUG_TRAP_TYPE_WARN) {
-		regs->pc += instruction_size(regs->pc);
+		regs->pc += instruction_size(bugaddr);
 		return;
 	}
 
+invalid:
 	die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff);
 }
 
@@ -28,8 +42,7 @@ int is_valid_bugaddr(unsigned long addr)
 		return 0;
 	if (probe_kernel_address((insn_size_t *)addr, opcode))
 		return 0;
-
-	if (opcode == TRAPA_BUG_OPCODE || opcode == TRAPA_UNWINDER_BUG_OPCODE)
+	if (opcode == TRAPA_BUG_OPCODE)
 		return 1;
 
 	return 0;
diff --git a/arch/sh/kernel/unwinder.c b/arch/sh/kernel/unwinder.c
index e83861d9739..468889d958f 100644
--- a/arch/sh/kernel/unwinder.c
+++ b/arch/sh/kernel/unwinder.c
@@ -161,25 +161,4 @@ void unwind_stack(struct task_struct *task, struct pt_regs *regs,
 
 	curr_unwinder->dump(task, regs, sp, ops, data);
 }
-
-/*
- * Trap handler for UWINDER_BUG() statements. We must switch to the
- * unwinder with the next highest rating.
- */
-BUILD_TRAP_HANDLER(unwinder)
-{
-	insn_size_t insn;
-	TRAP_HANDLER_DECL;
-
-	/* Rewind */
-	regs->pc -= instruction_size(ctrl_inw(regs->pc - 4));
-	insn = *(insn_size_t *)instruction_pointer(regs);
-
-	/* Switch unwinders when unwind_stack() is called */
-	unwinder_faulted = 1;
-
-#ifdef CONFIG_BUG
-	handle_BUG(regs);
-#endif
-}
 EXPORT_SYMBOL_GPL(unwind_stack);
-- 
cgit v1.2.3


From 74db2479c1fecefd0a190f282f28f00565309807 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 22 Aug 2009 05:31:45 +0900
Subject: sh64: dummy unwinder BUG wrappers.

sh64 does not yet support GENERIC_BUG, but still wants unwinder support.
Alias UNWINDER_BUG and UNWINDER_BUG_ON to their BUG counterparts until
the conversion to GENERIC_BUG is completed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/bug.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
index 23c5504a3a0..d02c01b3e6b 100644
--- a/arch/sh/include/asm/bug.h
+++ b/arch/sh/include/asm/bug.h
@@ -98,6 +98,11 @@ do {							\
 	unlikely(__ret_unwinder_on);				\
 })
 
+#else
+
+#define UNWINDER_BUG	BUG
+#define UNWINDER_BUG_ON	BUG_ON
+
 #endif /* CONFIG_GENERIC_BUG */
 
 #include <asm-generic/bug.h>
-- 
cgit v1.2.3


From 8b5a10fc6fd02289ea03480f93382b1a99006142 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Wed, 19 Aug 2009 08:40:48 +0100
Subject: x86: properly annotate alternatives.c

Some of the NOPs tables aren't used on 64-bits, quite some code and
data is needed post-init for module loading only, and a couple of
functions aren't used outside that file (i.e. can be static, and don't
need to be exported).

The change to __INITDATA/__INITRODATA is needed to avoid an assembler
warning.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4A8BC8A00200007800010823@vpn.id2.novell.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/alternative.h |  7 -----
 arch/x86/kernel/alternative.c      | 56 ++++++++++++++++++++++----------------
 2 files changed, 32 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 1a37bcdc860..c240efc74e0 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -73,8 +73,6 @@ static inline void alternatives_smp_module_del(struct module *mod) {}
 static inline void alternatives_smp_switch(int smp) {}
 #endif	/* CONFIG_SMP */
 
-const unsigned char *const *find_nop_table(void);
-
 /* alternative assembly primitive: */
 #define ALTERNATIVE(oldinstr, newinstr, feature)			\
 									\
@@ -144,8 +142,6 @@ static inline void apply_paravirt(struct paravirt_patch_site *start,
 #define __parainstructions_end	NULL
 #endif
 
-extern void add_nops(void *insns, unsigned int len);
-
 /*
  * Clear and restore the kernel write-protection flag on the local CPU.
  * Allows the kernel to edit read-only pages.
@@ -161,10 +157,7 @@ extern void add_nops(void *insns, unsigned int len);
  * Intel's errata.
  * On the local CPU you need to be protected again NMI or MCE handlers seeing an
  * inconsistent instruction while you patch.
- * The _early version expects the memory to already be RW.
  */
-
 extern void *text_poke(void *addr, const void *opcode, size_t len);
-extern void *text_poke_early(void *addr, const void *opcode, size_t len);
 
 #endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index f5765870257..486935143e0 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -2,6 +2,7 @@
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/list.h>
+#include <linux/stringify.h>
 #include <linux/kprobes.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
@@ -32,7 +33,7 @@ __setup("smp-alt-boot", bootonly);
 #define smp_alt_once 1
 #endif
 
-static int debug_alternative;
+static int __initdata_or_module debug_alternative;
 
 static int __init debug_alt(char *str)
 {
@@ -51,7 +52,7 @@ static int __init setup_noreplace_smp(char *str)
 __setup("noreplace-smp", setup_noreplace_smp);
 
 #ifdef CONFIG_PARAVIRT
-static int noreplace_paravirt = 0;
+static int __initdata_or_module noreplace_paravirt = 0;
 
 static int __init setup_noreplace_paravirt(char *str)
 {
@@ -64,16 +65,17 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt);
 #define DPRINTK(fmt, args...) if (debug_alternative) \
 	printk(KERN_DEBUG fmt, args)
 
-#ifdef GENERIC_NOP1
+#if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64)
 /* Use inline assembly to define this because the nops are defined
    as inline assembly strings in the include files and we cannot
    get them easily into strings. */
-asm("\t.section .rodata, \"a\"\nintelnops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nintelnops: "
 	GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
 	GENERIC_NOP7 GENERIC_NOP8
     "\t.previous");
 extern const unsigned char intelnops[];
-static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+intel_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	intelnops,
 	intelnops + 1,
@@ -87,12 +89,13 @@ static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
 #endif
 
 #ifdef K8_NOP1
-asm("\t.section .rodata, \"a\"\nk8nops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk8nops: "
 	K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
 	K8_NOP7 K8_NOP8
     "\t.previous");
 extern const unsigned char k8nops[];
-static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+k8_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	k8nops,
 	k8nops + 1,
@@ -105,13 +108,14 @@ static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
 };
 #endif
 
-#ifdef K7_NOP1
-asm("\t.section .rodata, \"a\"\nk7nops: "
+#if defined(K7_NOP1) && !defined(CONFIG_X86_64)
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk7nops: "
 	K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
 	K7_NOP7 K7_NOP8
     "\t.previous");
 extern const unsigned char k7nops[];
-static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+k7_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	k7nops,
 	k7nops + 1,
@@ -125,12 +129,13 @@ static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
 #endif
 
 #ifdef P6_NOP1
-asm("\t.section .rodata, \"a\"\np6nops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\np6nops: "
 	P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
 	P6_NOP7 P6_NOP8
     "\t.previous");
 extern const unsigned char p6nops[];
-static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+p6_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	p6nops,
 	p6nops + 1,
@@ -146,7 +151,7 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 #ifdef CONFIG_X86_64
 
 extern char __vsyscall_0;
-const unsigned char *const *find_nop_table(void)
+static const unsigned char *const *__init_or_module find_nop_table(void)
 {
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
 	    boot_cpu_has(X86_FEATURE_NOPL))
@@ -157,7 +162,7 @@ const unsigned char *const *find_nop_table(void)
 
 #else /* CONFIG_X86_64 */
 
-const unsigned char *const *find_nop_table(void)
+static const unsigned char *const *__init_or_module find_nop_table(void)
 {
 	if (boot_cpu_has(X86_FEATURE_K8))
 		return k8_nops;
@@ -172,7 +177,7 @@ const unsigned char *const *find_nop_table(void)
 #endif /* CONFIG_X86_64 */
 
 /* Use this to add nops to a buffer, then text_poke the whole buffer. */
-void add_nops(void *insns, unsigned int len)
+static void __init_or_module add_nops(void *insns, unsigned int len)
 {
 	const unsigned char *const *noptable = find_nop_table();
 
@@ -185,10 +190,10 @@ void add_nops(void *insns, unsigned int len)
 		len -= noplen;
 	}
 }
-EXPORT_SYMBOL_GPL(add_nops);
 
 extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
 extern u8 *__smp_locks[], *__smp_locks_end[];
+static void *text_poke_early(void *addr, const void *opcode, size_t len);
 
 /* Replace instructions with better alternatives for this CPU type.
    This runs before SMP is initialized to avoid SMP problems with
@@ -196,7 +201,8 @@ extern u8 *__smp_locks[], *__smp_locks_end[];
    APs have less capabilities than the boot processor are not handled.
    Tough. Make sure you disable such features by hand. */
 
-void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
+void __init_or_module apply_alternatives(struct alt_instr *start,
+					 struct alt_instr *end)
 {
 	struct alt_instr *a;
 	char insnbuf[MAX_PATCH_LEN];
@@ -279,9 +285,10 @@ static LIST_HEAD(smp_alt_modules);
 static DEFINE_MUTEX(smp_alt);
 static int smp_mode = 1;	/* protected by smp_alt */
 
-void alternatives_smp_module_add(struct module *mod, char *name,
-				 void *locks, void *locks_end,
-				 void *text,  void *text_end)
+void __init_or_module alternatives_smp_module_add(struct module *mod,
+						  char *name,
+						  void *locks, void *locks_end,
+						  void *text,  void *text_end)
 {
 	struct smp_alt_module *smp;
 
@@ -317,7 +324,7 @@ void alternatives_smp_module_add(struct module *mod, char *name,
 	mutex_unlock(&smp_alt);
 }
 
-void alternatives_smp_module_del(struct module *mod)
+void __init_or_module alternatives_smp_module_del(struct module *mod)
 {
 	struct smp_alt_module *item;
 
@@ -386,8 +393,8 @@ void alternatives_smp_switch(int smp)
 #endif
 
 #ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
-		    struct paravirt_patch_site *end)
+void __init_or_module apply_paravirt(struct paravirt_patch_site *start,
+				     struct paravirt_patch_site *end)
 {
 	struct paravirt_patch_site *p;
 	char insnbuf[MAX_PATCH_LEN];
@@ -485,7 +492,8 @@ void __init alternative_instructions(void)
  * instructions. And on the local CPU you need to be protected again NMI or MCE
  * handlers seeing an inconsistent instruction while you patch.
  */
-void *text_poke_early(void *addr, const void *opcode, size_t len)
+static void *__init_or_module text_poke_early(void *addr, const void *opcode,
+					      size_t len)
 {
 	unsigned long flags;
 	local_irq_save(flags);
-- 
cgit v1.2.3


From d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Wed, 19 Aug 2009 18:05:36 -0700
Subject: x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init

SDM Vol 3a section titled "MTRR considerations in MP systems" specifies
the need for synchronizing the logical cpu's while initializing/updating
MTRR.

Currently Linux kernel does the synchronization of all cpu's only when
a single MTRR register is programmed/updated. During an AP online
(during boot/cpu-online/resume)  where we initialize all the MTRR/PAT registers,
we don't follow this synchronization algorithm.

This can lead to scenarios where during a dynamic cpu online, that logical cpu
is initializing MTRR/PAT with cache disabled (cr0.cd=1) etc while other logical
HT sibling continue to run (also with cache disabled because of cr0.cd=1
on its sibling).

Starting from Westmere, VMX transitions with cr0.cd=1 don't work properly
(because of some VMX performance optimizations) and the above scenario
(with one logical cpu doing VMX activity and another logical cpu coming online)
can result in system crash.

Fix the MTRR initialization by doing rendezvous of all the cpus. During
boot and resume, we delay the MTRR/PAT init for APs till all the
logical cpu's come online and the rendezvous process at the end of AP's bringup,
will initialize the MTRR/PAT for all AP's.

For dynamic single cpu online, we synchronize all the logical cpus and
do the MTRR/PAT init on the AP that is coming online.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/mtrr.h     |  7 +++++++
 arch/x86/kernel/cpu/mtrr/main.c | 46 +++++++++++++++++++++++++++++++++--------
 arch/x86/kernel/smpboot.c       | 14 +++++++++++++
 arch/x86/power/cpu.c            |  2 +-
 4 files changed, 59 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index a51ada8467d..d5366ec5cb8 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -121,8 +121,12 @@ extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
 extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
 extern void mtrr_ap_init(void);
 extern void mtrr_bp_init(void);
+extern void set_mtrr_aps_delayed_init(void);
+extern void mtrr_aps_init(void);
+extern void mtrr_bp_restore(void);
 extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
 extern int amd_special_default_mtrr(void);
+extern u32 mtrr_aps_delayed_init;
 #  else
 static inline u8 mtrr_type_lookup(u64 addr, u64 end)
 {
@@ -161,6 +165,9 @@ static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
 
 #define mtrr_ap_init() do {} while (0)
 #define mtrr_bp_init() do {} while (0)
+#define set_mtrr_aps_delayed_init() do {} while (0)
+#define mtrr_aps_init() do {} while (0)
+#define mtrr_bp_restore() do {} while (0)
 #  endif
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 7af0f88a416..7339be0aa58 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -58,6 +58,7 @@ unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 static DEFINE_MUTEX(mtrr_mutex);
 
 u64 size_or_mask, size_and_mask;
+u32 mtrr_aps_delayed_init;
 
 static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
 
@@ -163,7 +164,10 @@ static void ipi_handler(void *info)
 	if (data->smp_reg != ~0U) {
 		mtrr_if->set(data->smp_reg, data->smp_base,
 			     data->smp_size, data->smp_type);
-	} else {
+	} else if (mtrr_aps_delayed_init) {
+		/*
+		 * Initialize the MTRRs inaddition to the synchronisation.
+		 */
 		mtrr_if->set_all();
 	}
 
@@ -265,6 +269,8 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 	 */
 	if (reg != ~0U)
 		mtrr_if->set(reg, base, size, type);
+	else if (!mtrr_aps_delayed_init)
+		mtrr_if->set_all();
 
 	/* Wait for the others */
 	while (atomic_read(&data.count))
@@ -721,9 +727,7 @@ void __init mtrr_bp_init(void)
 
 void mtrr_ap_init(void)
 {
-	unsigned long flags;
-
-	if (!mtrr_if || !use_intel())
+	if (!use_intel() || mtrr_aps_delayed_init)
 		return;
 	/*
 	 * Ideally we should hold mtrr_mutex here to avoid mtrr entries
@@ -738,11 +742,7 @@ void mtrr_ap_init(void)
 	 *   2. cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug
 	 *      lock to prevent mtrr entry changes
 	 */
-	local_irq_save(flags);
-
-	mtrr_if->set_all();
-
-	local_irq_restore(flags);
+	set_mtrr(~0U, 0, 0, 0);
 }
 
 /**
@@ -753,6 +753,34 @@ void mtrr_save_state(void)
 	smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1);
 }
 
+void set_mtrr_aps_delayed_init(void)
+{
+	if (!use_intel())
+		return;
+
+	mtrr_aps_delayed_init = 1;
+}
+
+/*
+ * MTRR initialization for all AP's
+ */
+void mtrr_aps_init(void)
+{
+	if (!use_intel())
+		return;
+
+	set_mtrr(~0U, 0, 0, 0);
+	mtrr_aps_delayed_init = 0;
+}
+
+void mtrr_bp_restore(void)
+{
+	if (!use_intel())
+		return;
+
+	mtrr_if->set_all();
+}
+
 static int __init mtrr_init_finialize(void)
 {
 	if (!mtrr_if)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda69ee6..d720b7e0cf3 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1116,9 +1116,22 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 	if (is_uv_system())
 		uv_system_init();
+
+	set_mtrr_aps_delayed_init();
 out:
 	preempt_enable();
 }
+
+void arch_enable_nonboot_cpus_begin(void)
+{
+	set_mtrr_aps_delayed_init();
+}
+
+void arch_enable_nonboot_cpus_end(void)
+{
+	mtrr_aps_init();
+}
+
 /*
  * Early setup to make printk work.
  */
@@ -1140,6 +1153,7 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 	setup_ioapic_dest();
 #endif
 	check_nmi_watchdog();
+	mtrr_aps_init();
 }
 
 static int __initdata setup_possible_cpus = -1;
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index b3d20b9cac6..417c9f5b4af 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -242,7 +242,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	fix_processor_context();
 
 	do_fpu_end();
-	mtrr_ap_init();
+	mtrr_bp_restore();
 
 #ifdef CONFIG_X86_OLD_MCE
 	mcheck_init(&boot_cpu_data);
-- 
cgit v1.2.3


From 5400743db5a06a4e6e298725a2044c40edcb27b9 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 21 Aug 2009 17:00:02 -0700
Subject: x86, mtrr: make mtrr_aps_delayed_init static bool

mtr_aps_delayed_init was declared u32 and made global, but it only
ever takes boolean values and is only ever used in
arch/x86/kernel/cpu/mtrr/main.c.  Declare it "static bool" and remove
external references.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/include/asm/mtrr.h     | 1 -
 arch/x86/kernel/cpu/mtrr/main.c | 6 +++---
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index d5366ec5cb8..4365ffdb461 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -126,7 +126,6 @@ extern void mtrr_aps_init(void);
 extern void mtrr_bp_restore(void);
 extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
 extern int amd_special_default_mtrr(void);
-extern u32 mtrr_aps_delayed_init;
 #  else
 static inline u8 mtrr_type_lookup(u64 addr, u64 end)
 {
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 7339be0aa58..84e83de5457 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -58,7 +58,7 @@ unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 static DEFINE_MUTEX(mtrr_mutex);
 
 u64 size_or_mask, size_and_mask;
-u32 mtrr_aps_delayed_init;
+static bool mtrr_aps_delayed_init;
 
 static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
 
@@ -758,7 +758,7 @@ void set_mtrr_aps_delayed_init(void)
 	if (!use_intel())
 		return;
 
-	mtrr_aps_delayed_init = 1;
+	mtrr_aps_delayed_init = true;
 }
 
 /*
@@ -770,7 +770,7 @@ void mtrr_aps_init(void)
 		return;
 
 	set_mtrr(~0U, 0, 0, 0);
-	mtrr_aps_delayed_init = 0;
+	mtrr_aps_delayed_init = false;
 }
 
 void mtrr_bp_restore(void)
-- 
cgit v1.2.3


From 4f896ffca2b72f4b719746e7fbb0b623252e6ac9 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Sat, 22 Aug 2009 19:03:25 +0900
Subject: sh: unwinder: cacheline align slab cache objects.

The CIE and FDE structs are big enough and accessed regularly enough in
certain configurations to make cacheline alignment useful.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 577302f31e6..700f7e0fd65 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -899,9 +899,12 @@ static int __init dwarf_unwinder_init(void)
 	entry = &__start_eh_frame;
 
 	dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
-			sizeof(struct dwarf_frame), 0, SLAB_PANIC, NULL);
+			sizeof(struct dwarf_frame), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
+
 	dwarf_reg_cachep = kmem_cache_create("dwarf_regs",
-			sizeof(struct dwarf_reg), 0, SLAB_PANIC, NULL);
+			sizeof(struct dwarf_reg), 0,
+			SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
 
 	dwarf_frame_pool = mempool_create(DWARF_FRAME_MIN_REQ,
 					  mempool_alloc_slab,
-- 
cgit v1.2.3


From a157229cabd6dd8cfa82525fc9bf730c94cc9ac2 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Sat, 22 Aug 2009 13:56:51 -0700
Subject: rcu: Simplify rcu_pending()/rcu_check_callbacks() API

All calls from outside RCU are of the form:

	if (rcu_pending(cpu))
		rcu_check_callbacks(cpu, user);

This is silly, instead we put a call to rcu_pending() in
rcu_check_callbacks(), and then make the outside calls be to
rcu_check_callbacks().  This cuts down on the code a bit and
also gives the compiler a better chance of optimizing.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <125097461311-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/xen/time.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c
index fb833269017..dbeadb9c8e2 100644
--- a/arch/ia64/xen/time.c
+++ b/arch/ia64/xen/time.c
@@ -133,8 +133,7 @@ consider_steal_time(unsigned long new_itm)
 		account_idle_ticks(blocked);
 		run_local_timers();
 
-		if (rcu_pending(cpu))
-			rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
+		rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
 
 		scheduler_tick();
 		run_posix_cpu_timers(p);
-- 
cgit v1.2.3


From d90246cd8e0141332a8ab09c3c1800cc2028a686 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Sat, 22 Aug 2009 22:23:13 +0200
Subject: timekeeping: Increase granularity of read_persistent_clock(), build
 fix

Fix the following build problem on powerpc:

  arch/powerpc/kernel/time.c: In function 'read_persistent_clock':
  arch/powerpc/kernel/time.c:788: error: 'return' with a value, in function returning void
  arch/powerpc/kernel/time.c:791: error: 'return' with a value, in function returning void

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: dwalker@fifo99.com
Cc: johnstul@us.ibm.com
LKML-Reference: <20090822222313.74b9619c@skybase>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/kernel/time.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index ad63f30fe3d..a508388fb87 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -774,6 +774,7 @@ void read_persistent_clock(struct timespec *ts)
 	struct rtc_time tm;
 	static int first = 1;
 
+	ts->tv_nsec = 0;
 	/* XXX this is a litle fragile but will work okay in the short term */
 	if (first) {
 		first = 0;
@@ -781,15 +782,18 @@ void read_persistent_clock(struct timespec *ts)
 			timezone_offset = ppc_md.time_init();
 
 		/* get_boot_time() isn't guaranteed to be safe to call late */
-		if (ppc_md.get_boot_time)
-			return ppc_md.get_boot_time() -timezone_offset;
+		if (ppc_md.get_boot_time) {
+			ts->tv_sec = ppc_md.get_boot_time() - timezone_offset;
+			return;
+		}
+	}
+	if (!ppc_md.get_rtc_time) {
+		ts->tv_sec = 0;
+		return;
 	}
-	if (!ppc_md.get_rtc_time)
-		return 0;
 	ppc_md.get_rtc_time(&tm);
 	ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
 			    tm.tm_hour, tm.tm_min, tm.tm_sec);
-	ts->tv_nsec = 0;
 }
 
 /* clocksource code */
-- 
cgit v1.2.3


From 6a93dde1e8216f7af9b2551a60fb1a5eeac4a89f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 14 Aug 2009 10:48:16 +0000
Subject: sh: Runtime PM for SuperH Mobile platform bus devices

This patch is V3 of the SuperH Mobile Runtime PM platform bus
implentation matching Rafael's Runtime PM v16.

The code gets invoked from the SuperH specific Runtime PM
platform bus functions that override the weak symbols for:
 - platform_pm_runtime_suspend()
 - platform_pm_runtime_resume()
 - platform_pm_runtime_idle()

This Runtime PM implementation performs two levels of power
management. At the time of platform bus runtime suspend the
clock to the device is stopped instantly. Later on if all
devices within the power domain has their clocks stopped
then the device driver ->runtime_suspend() callbacks are
used to save hardware register state for each device.

Device driver ->runtime_suspend() calls are scheduled from
cpuidle context using platform_pm_runtime_suspend_idle().
When all devices have been fully suspended the processor
is allowed to enter deep sleep from cpuidle.

The runtime resume operation turns on clocks and also
restores registers if needed. It is worth noting that the
devices start in a suspended state and the device driver
is responsible for calling runtime resume before accessing
the actual hardware.

In this particular platform bus implementation runtime
resume is not allowed from interrupt context. Runtime
suspend is however allowed from interrupt context as
long as the synchronous functions are avoided.

[ updated for v17 -- PFM. ]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/device.h             |   9 +
 arch/sh/include/asm/hwblk.h              |   4 +-
 arch/sh/kernel/cpu/shmobile/Makefile     |   1 +
 arch/sh/kernel/cpu/shmobile/pm_runtime.c | 304 +++++++++++++++++++++++++++++++
 4 files changed, 317 insertions(+), 1 deletion(-)
 create mode 100644 arch/sh/kernel/cpu/shmobile/pm_runtime.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index 783ecdc64e2..b16debfe8c1 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -14,6 +14,15 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 
 void plat_early_device_setup(void);
 
+#define PDEV_ARCHDATA_FLAG_INIT 0
+#define PDEV_ARCHDATA_FLAG_IDLE 1
+#define PDEV_ARCHDATA_FLAG_SUSP 2
+
 struct pdev_archdata {
 	int hwblk_id;
+#ifdef CONFIG_PM_RUNTIME
+	unsigned long flags;
+	struct list_head entry;
+	struct mutex mutex;
+#endif
 };
diff --git a/arch/sh/include/asm/hwblk.h b/arch/sh/include/asm/hwblk.h
index c01d72cb675..5d3ccae4202 100644
--- a/arch/sh/include/asm/hwblk.h
+++ b/arch/sh/include/asm/hwblk.h
@@ -5,7 +5,9 @@
 #include <asm/io.h>
 
 #define HWBLK_CNT_USAGE 0
-#define HWBLK_CNT_NR 1
+#define HWBLK_CNT_IDLE 1
+#define HWBLK_CNT_DEVICES 2
+#define HWBLK_CNT_NR 3
 
 #define HWBLK_AREA_FLAG_PARENT (1 << 0) /* valid parent */
 
diff --git a/arch/sh/kernel/cpu/shmobile/Makefile b/arch/sh/kernel/cpu/shmobile/Makefile
index e8a5111e848..a39f88ea1a8 100644
--- a/arch/sh/kernel/cpu/shmobile/Makefile
+++ b/arch/sh/kernel/cpu/shmobile/Makefile
@@ -5,3 +5,4 @@
 # Power Management & Sleep mode
 obj-$(CONFIG_PM)	+= pm.o sleep.o
 obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
+obj-$(CONFIG_PM_RUNTIME)	+= pm_runtime.o
diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
new file mode 100644
index 00000000000..d5f5285a225
--- /dev/null
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -0,0 +1,304 @@
+/*
+ * arch/sh/kernel/cpu/shmobile/pm_runtime.c
+ *
+ * Runtime PM support code for SuperH Mobile
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <asm/hwblk.h>
+
+static DEFINE_SPINLOCK(hwblk_lock);
+static LIST_HEAD(hwblk_idle_list);
+static struct work_struct hwblk_work;
+
+extern struct hwblk_info *hwblk_info;
+
+static void platform_pm_runtime_not_idle(struct platform_device *pdev)
+{
+	unsigned long flags;
+
+	/* remove device from idle list */
+	spin_lock_irqsave(&hwblk_lock, flags);
+	if (test_bit(PDEV_ARCHDATA_FLAG_IDLE, &pdev->archdata.flags)) {
+		list_del(&pdev->archdata.entry);
+		__clear_bit(PDEV_ARCHDATA_FLAG_IDLE, &pdev->archdata.flags);
+	}
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+}
+
+static int __platform_pm_runtime_resume(struct platform_device *pdev)
+{
+	struct device *d = &pdev->dev;
+	struct pdev_archdata *ad = &pdev->archdata;
+	int hwblk = ad->hwblk_id;
+	int ret = -ENOSYS;
+
+	dev_dbg(d, "__platform_pm_runtime_resume() [%d]\n", hwblk);
+
+	if (d->driver && d->driver->pm && d->driver->pm->runtime_resume) {
+		hwblk_enable(hwblk_info, hwblk);
+		ret = 0;
+
+		if (test_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags)) {
+			ret = d->driver->pm->runtime_resume(d);
+			if (!ret)
+				clear_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
+			else
+				hwblk_disable(hwblk_info, hwblk);
+		}
+	}
+
+	dev_dbg(d, "__platform_pm_runtime_resume() [%d] - returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+static int __platform_pm_runtime_suspend(struct platform_device *pdev)
+{
+	struct device *d = &pdev->dev;
+	struct pdev_archdata *ad = &pdev->archdata;
+	int hwblk = ad->hwblk_id;
+	int ret = -ENOSYS;
+
+	dev_dbg(d, "__platform_pm_runtime_suspend() [%d]\n", hwblk);
+
+	if (d->driver && d->driver->pm && d->driver->pm->runtime_suspend) {
+		BUG_ON(!test_bit(PDEV_ARCHDATA_FLAG_IDLE, &ad->flags));
+
+		hwblk_enable(hwblk_info, hwblk);
+		ret = d->driver->pm->runtime_suspend(d);
+		hwblk_disable(hwblk_info, hwblk);
+
+		if (!ret) {
+			set_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
+			platform_pm_runtime_not_idle(pdev);
+			hwblk_cnt_dec(hwblk_info, hwblk, HWBLK_CNT_IDLE);
+		}
+	}
+
+	dev_dbg(d, "__platform_pm_runtime_suspend() [%d] - returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+static void platform_pm_runtime_work(struct work_struct *work)
+{
+	struct platform_device *pdev;
+	unsigned long flags;
+	int ret;
+
+	/* go through the idle list and suspend one device at a time */
+	do {
+		spin_lock_irqsave(&hwblk_lock, flags);
+		if (list_empty(&hwblk_idle_list))
+			pdev = NULL;
+		else
+			pdev = list_first_entry(&hwblk_idle_list,
+						struct platform_device,
+						archdata.entry);
+		spin_unlock_irqrestore(&hwblk_lock, flags);
+
+		if (pdev) {
+			mutex_lock(&pdev->archdata.mutex);
+			ret = __platform_pm_runtime_suspend(pdev);
+
+			/* at this point the platform device may be:
+			 * suspended: ret = 0, FLAG_SUSP set, clock stopped
+			 * failed: ret < 0, FLAG_IDLE set, clock stopped
+			 */
+			mutex_unlock(&pdev->archdata.mutex);
+		} else {
+			ret = -ENODEV;
+		}
+	} while (!ret);
+}
+
+/* this function gets called from cpuidle context when all devices in the
+ * main power domain are unused but some are counted as idle, ie the hwblk
+ * counter values are (HWBLK_CNT_USAGE == 0) && (HWBLK_CNT_IDLE != 0)
+ */
+void platform_pm_runtime_suspend_idle(void)
+{
+	queue_work(pm_wq, &hwblk_work);
+}
+
+int platform_pm_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pdev_archdata *ad = &pdev->archdata;
+	unsigned long flags;
+	int hwblk = ad->hwblk_id;
+	int ret = 0;
+
+	dev_dbg(dev, "platform_pm_runtime_suspend() [%d]\n", hwblk);
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		goto out;
+
+	/* interrupt context not allowed */
+	might_sleep();
+
+	/* catch misconfigured drivers not starting with resume */
+	if (test_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* serialize */
+	mutex_lock(&ad->mutex);
+
+	/* disable clock */
+	hwblk_disable(hwblk_info, hwblk);
+
+	/* put device on idle list */
+	spin_lock_irqsave(&hwblk_lock, flags);
+	list_add_tail(&pdev->archdata.entry, &hwblk_idle_list);
+	__set_bit(PDEV_ARCHDATA_FLAG_IDLE, &pdev->archdata.flags);
+	spin_unlock_irqrestore(&hwblk_lock, flags);
+
+	/* increase idle count */
+	hwblk_cnt_inc(hwblk_info, hwblk, HWBLK_CNT_IDLE);
+
+	/* at this point the platform device is:
+	 * idle: ret = 0, FLAG_IDLE set, clock stopped
+	 */
+	mutex_unlock(&ad->mutex);
+
+out:
+	dev_dbg(dev, "platform_pm_runtime_suspend() [%d] returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+int platform_pm_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pdev_archdata *ad = &pdev->archdata;
+	int hwblk = ad->hwblk_id;
+	int ret = 0;
+
+	dev_dbg(dev, "platform_pm_runtime_resume() [%d]\n", hwblk);
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		goto out;
+
+	/* interrupt context not allowed */
+	might_sleep();
+
+	/* serialize */
+	mutex_lock(&ad->mutex);
+
+	/* make sure device is removed from idle list */
+	platform_pm_runtime_not_idle(pdev);
+
+	/* decrease idle count */
+	if (!test_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags) &&
+	    !test_bit(PDEV_ARCHDATA_FLAG_SUSP, &pdev->archdata.flags))
+		hwblk_cnt_dec(hwblk_info, hwblk, HWBLK_CNT_IDLE);
+
+	/* resume the device if needed */
+	ret = __platform_pm_runtime_resume(pdev);
+
+	/* the driver has been initialized now, so clear the init flag */
+	clear_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+
+	/* at this point the platform device may be:
+	 * resumed: ret = 0, flags = 0, clock started
+	 * failed: ret < 0, FLAG_SUSP set, clock stopped
+	 */
+	mutex_unlock(&ad->mutex);
+out:
+	dev_dbg(dev, "platform_pm_runtime_resume() [%d] returns %d\n",
+		hwblk, ret);
+
+	return ret;
+}
+
+int platform_pm_runtime_idle(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int hwblk = pdev->archdata.hwblk_id;
+	int ret = 0;
+
+	dev_dbg(dev, "platform_pm_runtime_idle() [%d]\n", hwblk);
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		goto out;
+
+	/* interrupt context not allowed, use pm_runtime_put()! */
+	might_sleep();
+
+	/* suspend synchronously to disable clocks immediately */
+	ret = pm_runtime_suspend(dev);
+out:
+	dev_dbg(dev, "platform_pm_runtime_idle() [%d] done!\n", hwblk);
+	return ret;
+}
+
+static int __devinit platform_bus_notify(struct notifier_block *nb,
+					 unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct platform_device *pdev = to_platform_device(dev);
+	int hwblk = pdev->archdata.hwblk_id;
+
+	/* ignore off-chip platform devices */
+	if (!hwblk)
+		return 0;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		INIT_LIST_HEAD(&pdev->archdata.entry);
+		mutex_init(&pdev->archdata.mutex);
+		/* platform devices without drivers should be disabled */
+		hwblk_enable(hwblk_info, hwblk);
+		hwblk_disable(hwblk_info, hwblk);
+		/* make sure driver re-inits itself once */
+		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+		break;
+	/* TODO: add BUS_NOTIFY_BIND_DRIVER and increase idle count */
+	case BUS_NOTIFY_BOUND_DRIVER:
+		/* keep track of number of devices in use per hwblk */
+		hwblk_cnt_inc(hwblk_info, hwblk, HWBLK_CNT_DEVICES);
+		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		/* keep track of number of devices in use per hwblk */
+		hwblk_cnt_dec(hwblk_info, hwblk, HWBLK_CNT_DEVICES);
+		/* make sure driver re-inits itself once */
+		__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
+		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+		break;
+	}
+	return 0;
+}
+
+static struct notifier_block platform_bus_notifier = {
+	.notifier_call = platform_bus_notify
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+	INIT_WORK(&hwblk_work, platform_pm_runtime_work);
+
+	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	return 0;
+}
+
+core_initcall(sh_pm_runtime_init);
-- 
cgit v1.2.3


From a62926fe4b76d539b77ee53197040153d43916f6 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 18 Aug 2009 10:41:06 +0900
Subject: sh: Fix section mismatch in platform bus notifier.

The runtime PM for SH-Mobile code had platform_bus_notify() as __devinit,
which is rather bogus. Kill off the annotation, which subsequently
silences the section mismatch warnings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/shmobile/pm_runtime.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
index d5f5285a225..7c615b17e20 100644
--- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -251,8 +251,8 @@ out:
 	return ret;
 }
 
-static int __devinit platform_bus_notify(struct notifier_block *nb,
-					 unsigned long action, void *data)
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
 {
 	struct device *dev = data;
 	struct platform_device *pdev = to_platform_device(dev);
@@ -300,5 +300,4 @@ static int __init sh_pm_runtime_init(void)
 	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
 	return 0;
 }
-
 core_initcall(sh_pm_runtime_init);
-- 
cgit v1.2.3


From ac2c596b572d08dab64dde3ac1f2de934d781c9f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 19 Aug 2009 10:31:53 +0000
Subject: sh: let ARCH_SHMOBILE select PM and PM_RUNTIME

With the Runtime PM driver changes in place, we must have
Runtime PM support in place. Otherwise there is no way to
enable clocks to the Runtime PM enabled hardware blocks.
This patch makes Runtime PM mandatory on SuperH Mobile.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index c4a955d2545..2a16014d9de 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -219,6 +219,8 @@ config CPU_SHX3
 config ARCH_SHMOBILE
 	bool
 	select ARCH_SUSPEND_POSSIBLE
+	select PM
+	select PM_RUNTIME
 
 if SUPERH32
 
-- 
cgit v1.2.3


From cc58f597afc63a57bb55ed97c2a72f7405320c93 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 19 Aug 2009 10:39:05 +0000
Subject: sh: drop static UIO clocks for sh7722, sh7723 and sh7724

The Runtime PM patch for UIO driver implements coarse grained
dynamic power management for UIO devices. With that patch in
place we can get rid of the static clock configuration. Which
in turn makes it possible for cpuidle to enter deeper sleep.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 6 +++---
 arch/sh/kernel/cpu/sh4a/clock-sh7723.c | 6 +++---
 arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 8 ++++----
 3 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 5b1bbbe63b1..ea38b554dc0 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -164,11 +164,11 @@ static struct clk mstp_clks[] = {
 	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
 	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
 	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
-	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, 0),
 	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
 	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
-	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU, 0),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
 	SH_HWBLK_CLK("lcdc0", -1, P_CLK, HWBLK_LCDC, 0),
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index e5c63911403..20a31c2255a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -190,12 +190,12 @@ static struct clk mstp_clks[] = {
 	SH_HWBLK_CLK("usb0", -1, B_CLK, HWBLK_USB, 0),
 	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
 	SH_HWBLK_CLK("siu0", -1, B_CLK, HWBLK_SIU, 0),
-	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU2H1, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU2H1, 0),
 	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
 	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU, 0),
 	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU, 0),
-	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU2H0, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU2H0, 0),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
 	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 34611d97378..a0c4ec25bcb 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -204,17 +204,17 @@ static struct clk mstp_clks[] = {
 	SH_HWBLK_CLK("2dg0", -1, B_CLK, HWBLK_2DG, 0),
 	SH_HWBLK_CLK("sdhi0", -1, B_CLK, HWBLK_SDHI0, 0),
 	SH_HWBLK_CLK("sdhi1", -1, B_CLK, HWBLK_SDHI1, 0),
-	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU1, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("veu1", -1, B_CLK, HWBLK_VEU1, 0),
 	SH_HWBLK_CLK("ceu1", -1, B_CLK, HWBLK_CEU1, 0),
 	SH_HWBLK_CLK("beu1", -1, B_CLK, HWBLK_BEU1, 0),
 	SH_HWBLK_CLK("2ddmac0", -1, SH_CLK, HWBLK_2DDMAC, 0),
 	SH_HWBLK_CLK("spu0", -1, B_CLK, HWBLK_SPU, 0),
-	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("jpu0", -1, B_CLK, HWBLK_JPU, 0),
 	SH_HWBLK_CLK("vou0", -1, B_CLK, HWBLK_VOU, 0),
 	SH_HWBLK_CLK("beu0", -1, B_CLK, HWBLK_BEU0, 0),
 	SH_HWBLK_CLK("ceu0", -1, B_CLK, HWBLK_CEU0, 0),
-	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU0, CLK_ENABLE_ON_INIT),
-	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, CLK_ENABLE_ON_INIT),
+	SH_HWBLK_CLK("veu0", -1, B_CLK, HWBLK_VEU0, 0),
+	SH_HWBLK_CLK("vpu0", -1, B_CLK, HWBLK_VPU, 0),
 	SH_HWBLK_CLK("lcdc0", -1, B_CLK, HWBLK_LCDC, 0),
 };
 
-- 
cgit v1.2.3


From 366d19e181be873c70f4aafca3931d77d781ccd7 Mon Sep 17 00:00:00 2001
From: Tobias Doerffel <tobias.doerffel@gmail.com>
Date: Fri, 21 Aug 2009 23:06:23 +0200
Subject: x86: add specific support for Intel Atom architecture

Add another option when selecting CPU family so the kernel can be
optimized for Intel Atom CPUs. If GCC supports tuning options for
Intel Atom they will be used.

Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <1251018457-19157-1-git-send-email-tobias.doerffel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig.cpu          | 19 ++++++++++++++-----
 arch/x86/Makefile             |  2 ++
 arch/x86/Makefile_32.cpu      |  2 ++
 arch/x86/include/asm/module.h |  2 ++
 4 files changed, 20 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 8130334329c..527519b8a9f 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -262,6 +262,15 @@ config MCORE2
 	  family in /proc/cpuinfo. Newer ones have 6 and older ones 15
 	  (not a typo)
 
+config MATOM
+	bool "Intel Atom"
+	---help---
+
+	  Select this for the Intel Atom platform. Intel Atom CPUs have an
+	  in-order pipelining architecture and thus can benefit from
+	  accordingly optimized code. Use a recent GCC with specific Atom
+	  support in order to fully benefit from selecting this option.
+
 config GENERIC_CPU
 	bool "Generic-x86-64"
 	depends on X86_64
@@ -295,7 +304,7 @@ config X86_CPU
 config X86_L1_CACHE_BYTES
 	int
 	default "128" if MPSC
-	default "64" if GENERIC_CPU || MK8 || MCORE2 || X86_32
+	default "64" if GENERIC_CPU || MK8 || MCORE2 || MATOM || X86_32
 
 config X86_INTERNODE_CACHE_BYTES
 	int
@@ -310,7 +319,7 @@ config X86_L1_CACHE_SHIFT
 	default "7" if MPENTIUM4 || MPSC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 || X86_GENERIC || GENERIC_CPU
+	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
 
 config X86_XADD
 	def_bool y
@@ -359,7 +368,7 @@ config X86_INTEL_USERCOPY
 
 config X86_USE_PPRO_CHECKSUM
 	def_bool y
-	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
+	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM
 
 config X86_USE_3DNOW
 	def_bool y
@@ -387,7 +396,7 @@ config X86_P6_NOP
 
 config X86_TSC
 	def_bool y
-	depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
+	depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64
 
 config X86_CMPXCHG64
 	def_bool y
@@ -397,7 +406,7 @@ config X86_CMPXCHG64
 # generates cmov.
 config X86_CMOV
 	def_bool y
-	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64)
+	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM)
 
 config X86_MINIMUM_CPU_FAMILY
 	int
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1b68659c41b..8a4c24c96d0 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -55,6 +55,8 @@ else
 
         cflags-$(CONFIG_MCORE2) += \
                 $(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
+	cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
+		$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
         cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
         KBUILD_CFLAGS += $(cflags-y)
 
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index 80177ec052f..30e9a264f69 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -33,6 +33,8 @@ cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-f
 cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
 cflags-$(CONFIG_MVIAC7)		+= -march=i686
 cflags-$(CONFIG_MCORE2)		+= -march=i686 $(call tune,core2)
+cflags-$(CONFIG_MATOM)		+= $(call cc-option,-march=atom,$(call cc-option,-march=core2,-march=i686)) \
+	$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
 
 # AMD Elan support
 cflags-$(CONFIG_X86_ELAN)	+= -march=i486
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 47d62743c4d..e959c4afab5 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -28,6 +28,8 @@ struct mod_arch_specific {};
 #define MODULE_PROC_FAMILY "586MMX "
 #elif defined CONFIG_MCORE2
 #define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_MATOM
+#define MODULE_PROC_FAMILY "ATOM "
 #elif defined CONFIG_M686
 #define MODULE_PROC_FAMILY "686 "
 #elif defined CONFIG_MPENTIUMII
-- 
cgit v1.2.3


From 637952ca689013339b977558061fa4ca8e07e1c1 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Sun, 23 Aug 2009 18:09:06 +0200
Subject: [S390] set preferred console based on conmode

setup_arch() unconditionally sets the preferred console to ttyS.
This breaks the use of 3270 devices as the console. Provide a new
function to set the default preferred console for s390. The preferred
console depends on the conmode parameter that is used to switch
between 3270 and 3215 terminal/console mode.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/setup.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 9717717c6fe..cbb897bc50b 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -154,6 +154,20 @@ static int __init condev_setup(char *str)
 
 __setup("condev=", condev_setup);
 
+static void __init set_preferred_console(void)
+{
+	if (MACHINE_IS_KVM) {
+		add_preferred_console("hvc", 0, NULL);
+		s390_virtio_console_init();
+		return;
+	}
+
+	if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+		add_preferred_console("ttyS", 0, NULL);
+	if (CONSOLE_IS_3270)
+		add_preferred_console("tty3270", 0, NULL);
+}
+
 static int __init conmode_setup(char *str)
 {
 #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE)
@@ -168,6 +182,7 @@ static int __init conmode_setup(char *str)
 	if (strncmp(str, "3270", 5) == 0)
 		SET_CONSOLE_3270;
 #endif
+	set_preferred_console();
         return 1;
 }
 
@@ -780,9 +795,6 @@ static void __init setup_hwcaps(void)
 void __init
 setup_arch(char **cmdline_p)
 {
-	/* set up preferred console */
-	add_preferred_console("ttyS", 0, NULL);
-
         /*
          * print what head.S has found out about the machine
          */
@@ -802,11 +814,9 @@ setup_arch(char **cmdline_p)
 	if (MACHINE_IS_VM)
 		pr_info("Linux is running as a z/VM "
 			"guest operating system in 64-bit mode\n");
-	else if (MACHINE_IS_KVM) {
+	else if (MACHINE_IS_KVM)
 		pr_info("Linux is running under KVM in 64-bit mode\n");
-		add_preferred_console("hvc", 0, NULL);
-		s390_virtio_console_init();
-	} else
+	else
 		pr_info("Linux is running natively in 64-bit mode\n");
 #endif /* CONFIG_64BIT */
 
@@ -851,6 +861,7 @@ setup_arch(char **cmdline_p)
 
         /* Setup default console */
 	conmode_default();
+	set_preferred_console();
 
 	/* Setup zfcpdump support */
 	setup_zfcpdump(console_devno);
-- 
cgit v1.2.3


From 9a4af027a03e10e97f56081cd7dd1fda5282bd9c Mon Sep 17 00:00:00 2001
From: Andre Draszik <andre.draszik@st.com>
Date: Mon, 24 Aug 2009 14:38:27 +0900
Subject: sh: ratelimit unaligned fixups

This patch makes sure we see messages about unaligned access fixups
every now and then. Else especially userspace apps suffering from
bad programming won't ever be noticed...

Signed-off by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 05a04b6df84..866c7c7a823 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -359,13 +359,6 @@ static inline int handle_delayslot(struct pt_regs *regs,
 #define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4)
 #define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
 
-/*
- * XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit
- * opcodes..
- */
-
-static int handle_unaligned_notify_count = 10;
-
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 			    struct mem_access *ma)
 {
@@ -375,15 +368,13 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 	index = (instruction>>8)&15;	/* 0x0F00 */
 	rm = regs->regs[index];
 
-	/* shout about the first ten userspace fixups */
-	if (user_mode(regs) && handle_unaligned_notify_count>0) {
-		handle_unaligned_notify_count--;
-
-		printk(KERN_NOTICE "Fixing up unaligned userspace access "
+	/* shout about fixups */
+	if (printk_ratelimit())
+		printk(KERN_NOTICE "Fixing up unaligned %s access "
 		       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+		       user_mode(regs) ? "userspace" : "kernel",
 		       current->comm, task_pid_nr(current),
 		       (void *)regs->pc, instruction);
-	}
 
 	ret = -EFAULT;
 	switch (instruction&0xF000) {
-- 
cgit v1.2.3


From 7436cde6b2ca71049051620c68c26522bb3403bf Mon Sep 17 00:00:00 2001
From: Andre Draszik <andre.draszik@st.com>
Date: Mon, 24 Aug 2009 14:53:46 +0900
Subject: sh: Allow user control over misaligned fixup handling

This patch brings the SH4 misaligned trap handler in line with what
happens on ARM:
Add a /proc/cpu/alignment which can be read from to get alignment
trap statistics and written to to influence the behaviour of the
alignment trap handling. The value to write is a bitfield, which
has the following meaning: 1 warn, 2 fixup, 4 signal
In addition, we add a /proc/cpu/kernel_alignment, to enable or
disable warnings in case of kernel code causing alignment errors.

Signed-off by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 153 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 153 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 866c7c7a823..0ad356d00ac 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -24,6 +24,7 @@
 #include <linux/kdebug.h>
 #include <linux/kexec.h>
 #include <linux/limits.h>
+#include <linux/proc_fs.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/fpu.h>
@@ -44,6 +45,87 @@
 #define TRAP_ILLEGAL_SLOT_INST	13
 #endif
 
+static unsigned long se_user;
+static unsigned long se_sys;
+static unsigned long se_skipped;
+static unsigned long se_half;
+static unsigned long se_word;
+static unsigned long se_dword;
+static unsigned long se_multi;
+/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
+   valid! */
+static int se_usermode = 3;
+/* 0: no warning 1: print a warning message */
+static int se_kernmode_warn = 1;
+
+#ifdef CONFIG_PROC_FS
+static const char *se_usermode_action[] = {
+	"ignored",
+	"warn",
+	"fixup",
+	"fixup+warn",
+	"signal",
+	"signal+warn"
+};
+
+static int
+proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
+		    void *data)
+{
+	char *p = page;
+	int len;
+
+	p += sprintf(p, "User:\t\t%lu\n", se_user);
+	p += sprintf(p, "System:\t\t%lu\n", se_sys);
+	p += sprintf(p, "Skipped:\t%lu\n", se_skipped);
+	p += sprintf(p, "Half:\t\t%lu\n", se_half);
+	p += sprintf(p, "Word:\t\t%lu\n", se_word);
+	p += sprintf(p, "DWord:\t\t%lu\n", se_dword);
+	p += sprintf(p, "Multi:\t\t%lu\n", se_multi);
+	p += sprintf(p, "User faults:\t%i (%s)\n", se_usermode,
+			se_usermode_action[se_usermode]);
+	p += sprintf(p, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
+			se_kernmode_warn ? "+warn" : "");
+
+	len = (p - page) - off;
+	if (len < 0)
+		len = 0;
+
+	*eof = (len <= count) ? 1 : 0;
+	*start = page + off;
+
+	return len;
+}
+
+static int proc_alignment_write(struct file *file, const char __user *buffer,
+				unsigned long count, void *data)
+{
+	char mode;
+
+	if (count > 0) {
+		if (get_user(mode, buffer))
+			return -EFAULT;
+		if (mode >= '0' && mode <= '5')
+			se_usermode = mode - '0';
+	}
+	return count;
+}
+
+static int proc_alignment_kern_write(struct file *file, const char __user *buffer,
+				     unsigned long count, void *data)
+{
+	char mode;
+
+	if (count > 0) {
+		if (get_user(mode, buffer))
+			return -EFAULT;
+		if (mode >= '0' && mode <= '1')
+			se_kernmode_warn = mode - '0';
+	}
+	return count;
+}
+#endif
+
 static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 {
 	unsigned long p;
@@ -194,6 +276,13 @@ static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
 
 	count = 1<<(instruction&3);
 
+	switch (count) {
+	case 1: se_half  += 1; break;
+	case 2: se_word  += 1; break;
+	case 4: se_dword += 1; break;
+	case 8: se_multi += 1; break; /* ??? */
+	}
+
 	ret = -EFAULT;
 	switch (instruction>>12) {
 	case 0: /* mov.[bwl] to/from memory via r0+rn */
@@ -530,6 +619,27 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 		local_irq_enable();
 
+		se_user += 1;
+
+		/* shout about userspace fixups */
+		if (se_usermode & 1)
+			printk(KERN_NOTICE "Unaligned userspace access "
+			       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			       current->comm, current->pid, (void *)regs->pc,
+			       instruction);
+
+		if (se_usermode & 2)
+			goto fixup;
+
+		if (se_usermode & 4)
+			goto uspace_segv;
+		else {
+			/* ignore */
+			trace_mark(kernel_arch_trap_exit, MARK_NOARGS);
+			return;
+		}
+
+fixup:
 		/* bad PC is not something we can fix */
 		if (regs->pc & 1) {
 			si_code = BUS_ADRALN;
@@ -563,6 +673,14 @@ uspace_segv:
 		info.si_addr = (void __user *)address;
 		force_sig_info(SIGBUS, &info, current);
 	} else {
+		se_sys += 1;
+
+		if (se_kernmode_warn)
+			printk(KERN_NOTICE "Unaligned kernel access "
+			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			       current->comm, current->pid, (void *)regs->pc,
+			       instruction);
+
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
 
@@ -872,3 +990,38 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
+
+#ifdef CONFIG_PROC_FS
+/*
+ * This needs to be done after sysctl_init, otherwise sys/ will be
+ * overwritten.  Actually, this shouldn't be in sys/ at all since
+ * it isn't a sysctl, and it doesn't contain sysctl information.
+ * We now locate it in /proc/cpu/alignment instead.
+ */
+static int __init alignment_init(void)
+{
+	struct proc_dir_entry *dir, *res;
+
+	dir = proc_mkdir("cpu", NULL);
+	if (!dir)
+		return -ENOMEM;
+
+	res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, dir);
+	if (!res)
+		return -ENOMEM;
+
+	res->read_proc = proc_alignment_read;
+	res->write_proc = proc_alignment_write;
+
+        res = create_proc_entry("kernel_alignment", S_IWUSR | S_IRUGO, dir);
+        if (!res)
+                return -ENOMEM;
+
+        res->read_proc = proc_alignment_read;
+        res->write_proc = proc_alignment_kern_write;
+
+	return 0;
+}
+
+fs_initcall(alignment_init);
+#endif
-- 
cgit v1.2.3


From 5a0ab35e43a6e3c69893c0091fe6a78ea8b3e443 Mon Sep 17 00:00:00 2001
From: Andre Draszik <andre.draszik@st.com>
Date: Mon, 24 Aug 2009 15:01:10 +0900
Subject: sh: cleanup of do_address_error()

This patch fixes a few problems with the existing code in do_address_error().

a) the variable used to printk()d the offending instruction wasn't
   initialized correctly. This is a fix to bug 5727

b) behaviour for CONFIG_CPU_SH2A wasn't correct

c) the 'ignore address error' behaviour didn't update the PC, causing an
   infinite loop.

Signed-off-by: Andre Draszik <andre.draszik@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 0ad356d00ac..c581dc31d92 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -621,12 +621,21 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 		se_user += 1;
 
+#ifndef CONFIG_CPU_SH2A
+		set_fs(USER_DS);
+		if (copy_from_user(&instruction, (u16 *)(regs->pc & ~1), 2)) {
+			set_fs(oldfs);
+			goto uspace_segv;
+		}
+		set_fs(oldfs);
+
 		/* shout about userspace fixups */
 		if (se_usermode & 1)
 			printk(KERN_NOTICE "Unaligned userspace access "
 			       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
 			       current->comm, current->pid, (void *)regs->pc,
 			       instruction);
+#endif
 
 		if (se_usermode & 2)
 			goto fixup;
@@ -635,7 +644,7 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 			goto uspace_segv;
 		else {
 			/* ignore */
-			trace_mark(kernel_arch_trap_exit, MARK_NOARGS);
+			regs->pc += instruction_size(instruction);
 			return;
 		}
 
@@ -647,15 +656,6 @@ fixup:
 		}
 
 		set_fs(USER_DS);
-		if (copy_from_user(&instruction, (void __user *)(regs->pc),
-				   sizeof(instruction))) {
-			/* Argh. Fault on the instruction itself.
-			   This should never happen non-SMP
-			*/
-			set_fs(oldfs);
-			goto uspace_segv;
-		}
-
 		tmp = handle_unaligned_access(instruction, regs,
 					      &user_mem_access);
 		set_fs(oldfs);
-- 
cgit v1.2.3


From 2fc742f8d64c68b4a175a1dcb28351b112d63315 Mon Sep 17 00:00:00 2001
From: Carl Shaw <carl.shaw@st.com>
Date: Mon, 24 Aug 2009 15:07:08 +0900
Subject: sh: Improve unwind info for signals

GCC does not issue unwind information for function epilogues.
Unfortunately we can catch a signal during an epilogue.  The signal
handler writes the current context and signal return code onto the stack
overwriting previous contents.  During unwinding, libgcc can try to
restore registers from the stack and restores corrupted ones. This can
lead to segmentation, misaligned access and sigbus faults.

For example, consider the following code:

    mov.l   r12,@-r15
    mov.l   r14,@-r15
    sts.l   pr,@-r15
    mov     r15,r14

    <do stuff>

    mov r14, r15
    lds.l @r15+, pr
	<<< SIGNAL HERE
    mov.l @r15+, r14
    mov.l @r15+, r12
    rts

Unwind is aware that pr was pushed to stack in prolog, so tries to
restore it.  Unfortunately it restores the last word of the signal
handler code placed on the stack by the kernel.

This patch tries to avoid the problem by adding a guard region on the
stack between where the function pushes data and where the signal handler
pushes its return code.  We probably don't see this problem often because
exception handling unwinding in an epilogue only occurs due to a pthread
cancel signal.  Also the kernel signal stack handler alignment of 8 bytes
could hide the occurance of this problem sometimes as the stack may not
be trampled at a particular required word.

This is not guaranteed to always work.  It relies on a frame pointer
existing for the function (so it can get the correct sp value) which is
not always the case for the SH4.

Modifications will also be made to libgcc for the case where there is no
fp.

Signed-off-by: Carl Shaw <carl.shaw@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/signal_32.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index b5afbec1db5..6010750c90b 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -40,6 +40,16 @@ struct fdpic_func_descriptor {
 	unsigned long	GOT;
 };
 
+/*
+ * The following define adds a 64 byte gap between the signal
+ * stack frame and previous contents of the stack.  This allows
+ * frame unwinding in a function epilogue but only if a frame
+ * pointer is used in the function.  This is necessary because
+ * current gcc compilers (<4.3) do not generate unwind info on
+ * SH for function epilogues.
+ */
+#define UNWINDGUARD 64
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -327,7 +337,7 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
-	return (void __user *)((sp - frame_size) & -8ul);
+	return (void __user *)((sp - (frame_size+UNWINDGUARD)) & -8ul);
 }
 
 /* These symbols are defined with the addresses in the vsyscall page.
-- 
cgit v1.2.3


From 15444a8973dcfbd286b3e638cbadac2446a9271a Mon Sep 17 00:00:00 2001
From: David McKay <david.mckay@st.com>
Date: Mon, 24 Aug 2009 16:10:40 +0900
Subject: sh: Allow use of GENERIC_IOMAP

The synopsys PCI cell used in the later STMicro chips requires code to
be run in order to do IO cycles, rather than just memory mapping the IO
space. Rather than extending the existing SH infrastructure to allow
this, use the GENERIC_IOMAP implmentation to save re-inventing the
wheel.

This set of changes allows the SH to be built with GENERIC_IOMAP
enabled, it just ifdef's out the functions provided by the GENERIC_IOMAP
implementation, and provides a few required missing functions.

Signed-off-by: David McKay <david.mckay@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/drivers/pci/pci.c |  4 ++++
 arch/sh/include/asm/io.h  | 10 ++++++++++
 arch/sh/kernel/io.c       |  4 ++++
 3 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 9a1c423ad16..c481df63902 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -295,6 +295,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			       vma->vm_page_prot);
 }
 
+#ifndef CONFIG_GENERIC_IOMAP
+
 static void __iomem *ioport_map_pci(struct pci_dev *dev,
 				    unsigned long port, unsigned int nr)
 {
@@ -346,6 +348,8 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
 }
 EXPORT_SYMBOL(pci_iounmap);
 
+#endif /* CONFIG_GENERIC_IOMAP */
+
 #ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pcibios_resource_to_bus);
 EXPORT_SYMBOL(pcibios_bus_to_resource);
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 25348141674..aeecf432d48 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -146,6 +146,7 @@ __BUILD_MEMORY_STRING(q, u64)
 #define readl_relaxed(a)	readl(a)
 #define readq_relaxed(a)	readq(a)
 
+#ifndef CONFIG_GENERIC_IOMAP
 /* Simple MMIO */
 #define ioread8(a)		__raw_readb(a)
 #define ioread16(a)		__raw_readw(a)
@@ -166,6 +167,15 @@ __BUILD_MEMORY_STRING(q, u64)
 #define iowrite8_rep(a, s, c)	__raw_writesb((a), (s), (c))
 #define iowrite16_rep(a, s, c)	__raw_writesw((a), (s), (c))
 #define iowrite32_rep(a, s, c)	__raw_writesl((a), (s), (c))
+#endif
+
+#define mmio_insb(p,d,c)	__raw_readsb(p,d,c)
+#define mmio_insw(p,d,c)	__raw_readsw(p,d,c)
+#define mmio_insl(p,d,c)	__raw_readsl(p,d,c)
+
+#define mmio_outsb(p,s,c)	__raw_writesb(p,s,c)
+#define mmio_outsw(p,s,c)	__raw_writesw(p,s,c)
+#define mmio_outsl(p,s,c)	__raw_writesl(p,s,c)
 
 /* synco on SH-4A, otherwise a nop */
 #define mmiowb()		wmb()
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 4f85fffaa55..d0ca9684b78 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -62,6 +62,8 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count)
 }
 EXPORT_SYMBOL(memset_io);
 
+#ifndef CONFIG_GENERIC_IOMAP
+
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	void __iomem *ret;
@@ -79,3 +81,5 @@ void ioport_unmap(void __iomem *addr)
 	sh_mv.mv_ioport_unmap(addr);
 }
 EXPORT_SYMBOL(ioport_unmap);
+
+#endif /* CONFIG_GENERIC_IOMAP */
-- 
cgit v1.2.3


From 27a30f53bbb77fd7e2e0459197e23b63fe3b74d4 Mon Sep 17 00:00:00 2001
From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Date: Mon, 24 Aug 2009 16:14:03 +0900
Subject: sh: kgdb: do not reload VBR while handling debugger breackpoint

Save the VBR allowing GDB to dump full registers set but do not reload it
as soon as the kgdb_handle_exception is invoked.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/kgdb.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index 305aad742ae..d29de7864f3 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -195,8 +195,6 @@ void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 	regs->gbr = gdb_regs[GDB_GBR];
 	regs->mach = gdb_regs[GDB_MACH];
 	regs->macl = gdb_regs[GDB_MACL];
-
-	__asm__ __volatile__ ("ldc %0, vbr" : : "r" (gdb_regs[GDB_VBR]));
 }
 
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
-- 
cgit v1.2.3


From b46373e0d4b9f714ab757aae0c19c41fbcc73ef5 Mon Sep 17 00:00:00 2001
From: Jon Frosdick <jon.frosdick@st.com>
Date: Mon, 24 Aug 2009 16:20:44 +0900
Subject: sh: Use internal watchdog timer to perform reset

This patches will trigger a reboot using the watchdog
timer instead of double fault.  Unlike the previous
method, this one actually works in 32 bit mode.

Reset should also be cleaner.

Signed-off-by: Jon Frosdick <jon.frosdick@st.com>
Signed-off-by: Carl Shaw <carl.shaw@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/process_32.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 9fee977f176..0673c4746be 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -32,15 +32,35 @@
 #include <asm/ubc.h>
 #include <asm/fpu.h>
 #include <asm/syscalls.h>
+#include <asm/watchdog.h>
 
 int ubc_usercnt = 0;
 
+#ifdef CONFIG_32BIT
+static void watchdog_trigger_immediate(void)
+{
+	sh_wdt_write_cnt(0xFF);
+	sh_wdt_write_csr(0xC2);
+}
+
+void machine_restart(char * __unused)
+{
+	local_irq_disable();
+
+	/* Use watchdog timer to trigger reset */
+	watchdog_trigger_immediate();
+
+	while (1)
+		cpu_sleep();
+}
+#else
 void machine_restart(char * __unused)
 {
 	/* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
 	asm volatile("ldc %0, sr\n\t"
 		     "mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
 }
+#endif
 
 void machine_halt(void)
 {
-- 
cgit v1.2.3


From d724a9c9d572e092d1ce820463f082697487b874 Mon Sep 17 00:00:00 2001
From: Pawel Moll <pawel.moll@st.com>
Date: Mon, 24 Aug 2009 16:25:38 +0900
Subject: sh: Allow for kernel command line concatenation.

So far kernel command line arguments could be passed in by a bootloader
or defined as CONFIG_CMDLINE, which completely overwriting the first one.

This change allows a developer to declare selected kernel parameters in
a kernel configuration (eg. project-specific defconfig), retaining
possibility of passing others by a bootloader.

The obvious examples of the first type are MTD partition or
bigphysarea-like region definitions, while "debug" option or network
configuration should be given by a bootloader or a JTAG boot script.

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig        | 27 +++++++++++++++++++++++----
 arch/sh/kernel/setup.c |  6 +++++-
 2 files changed, 28 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 80b4f9a743a..2f5352c06a0 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -767,12 +767,31 @@ config UBC_WAKEUP
 
 	  If unsure, say N.
 
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
+choice
+	prompt "Kernel command line"
+	optional
+	default CMDLINE_OVERWRITE
+	help
+	  Setting this option allows the kernel command line arguments
+	  to be set.
+
+config CMDLINE_OVERWRITE
+	bool "Overwrite bootloader kernel arguments"
+	help
+	  Given string will overwrite any arguments passed in by
+	  a bootloader.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  Given string will be concatenated with arguments passed in
+	  by a bootloader.
+
+endchoice
 
 config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
+	string "Kernel command line arguments string"
+	depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
 	default "console=ttySC1,115200"
 
 endmenu
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 212e6bddaeb..d13bbafb4e1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -404,10 +404,14 @@ void __init setup_arch(char **cmdline_p)
 	if (!memory_end)
 		memory_end = memory_start + __MEMORY_SIZE;
 
-#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERWRITE
 	strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
 #else
 	strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
+#ifdef CONFIG_CMDLINE_EXTEND
+	strlcat(command_line, " ", sizeof(command_line));
+	strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
+#endif
 #endif
 
 	/* Save unparsed command line copy for /proc/cmdline */
-- 
cgit v1.2.3


From fea966f7564205fcf5919af9bde031e753419c96 Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 17:09:53 +0900
Subject: sh: Remove implicit sign extension from assembler immediates

The SH instruction set has several instructions which accept an 8 bit
immediate operand. For logical instructions this operand is zero extended,
for arithmetic instructions the operand is sign extended. After adding an
option to the assembler to check this, it was found that several pieces
of assembly code were assuming this behaviour, and in one case
getting it wrong.

So this patch explicitly sign extends any immediate operands, which makes
it obvious what is happening, and fixes the one case which got it wrong.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boot/compressed/head_32.S  | 2 +-
 arch/sh/include/asm/entry-macros.S | 2 +-
 arch/sh/kernel/cpu/sh3/entry.S     | 2 +-
 arch/sh/kernel/entry-common.S      | 5 +++--
 arch/sh/lib/clear_page.S           | 2 +-
 5 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
index 06ac31f3be8..02a30935f0b 100644
--- a/arch/sh/boot/compressed/head_32.S
+++ b/arch/sh/boot/compressed/head_32.S
@@ -22,7 +22,7 @@ startup:
 	bt	clear_bss
 	sub	r0, r2
 	mov.l	bss_start_addr, r0
-	mov	#0xe0, r1
+	mov	#0xffffffe0, r1
 	and	r1, r0			! align cache line
 	mov.l	text_start_addr, r3
 	mov	r0, r1
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
index 64fd0de24da..cc43a55e1fc 100644
--- a/arch/sh/include/asm/entry-macros.S
+++ b/arch/sh/include/asm/entry-macros.S
@@ -7,7 +7,7 @@
 	.endm
 
 	.macro	sti
-	mov	#0xf0, r11
+	mov	#0xfffffff0, r11
 	extu.b	r11, r11
 	not	r11, r11
 	stc	sr, r10
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 8c19e21847d..9421ec715fd 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -257,7 +257,7 @@ restore_all:
 	!
 	! Calculate new SR value
 	mov	k3, k2			! original SR value
-	mov	#0xf0, k1
+	mov	#0xfffffff0, k1
 	extu.b	k1, k1
 	not	k1, k1
 	and	k1, k2			! Mask original SR value
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 700477601c6..68d9223b145 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -98,8 +98,9 @@ need_resched:
 
 	mov	#OFF_SR, r0
 	mov.l	@(r0,r15), r0		! get status register
-	and	#0xf0, r0		! interrupts off (exception path)?
-	cmp/eq	#0xf0, r0
+	shlr	r0
+	and	#(0xf0>>1), r0		! interrupts off (exception path)?
+	cmp/eq	#(0xf0>>1), r0
 	bt	noresched
 	mov.l	3f, r0
 	jsr	@r0			! call preempt_schedule_irq
diff --git a/arch/sh/lib/clear_page.S b/arch/sh/lib/clear_page.S
index 8342bfbde64..c92244d4ff9 100644
--- a/arch/sh/lib/clear_page.S
+++ b/arch/sh/lib/clear_page.S
@@ -57,7 +57,7 @@ ENTRY(clear_page)
 ENTRY(__clear_user)
 	!
 	mov	#0, r0
-	mov	#0xe0, r1	! 0xffffffe0
+	mov	#0xffffffe0, r1
 	!
 	! r4..(r4+31)&~32 	   -------- not aligned	[ Area 0 ]
 	! (r4+31)&~32..(r4+r5)&~32 -------- aligned	[ Area 1 ]
-- 
cgit v1.2.3


From 7d9c035150897c2bebedae280505513dbdef2abc Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 17:13:52 +0900
Subject: sh: Read from CCN_PVR instead of ROM for delay.

Reading from the ROM is not a good idea as it could disturb some
flash operation that it is in progress.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/io.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index aeecf432d48..5be45ea4dfe 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -92,8 +92,12 @@
 
 static inline void ctrl_delay(void)
 {
-#ifdef P2SEG
+#ifdef CONFIG_CPU_SH4
+	__raw_readw(CCN_PVR);
+#elif defined(P2SEG)
 	__raw_readw(P2SEG);
+#else
+#error "Need a dummy address for delay"
 #endif
 }
 
-- 
cgit v1.2.3


From 8af57f8b4c0ada9063b1cee9d81e3e59f04ce5a2 Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 17:26:39 +0900
Subject: sh: generic_in/outs{bwl} optimizations.

After performing the port2addr conversion, and checking that the data is
correctly aligned, simply call __raw_readsX/writesX. These have already been
optimised.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/io_generic.c | 50 ++++++++-------------------------------------
 1 file changed, 8 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 5a7f554d9ca..4ff50723928 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -73,35 +73,19 @@ u32 generic_inl_p(unsigned long port)
 
 void generic_insb(unsigned long port, void *dst, unsigned long count)
 {
-	volatile u8 *port_addr;
-	u8 *buf = dst;
-
-	port_addr = (volatile u8 __force *)__ioport_map(port, 1);
-	while (count--)
-		*buf++ = *port_addr;
+	__raw_readsb(__ioport_map(port, 1), dst, count);
+	dummy_read();
 }
 
 void generic_insw(unsigned long port, void *dst, unsigned long count)
 {
-	volatile u16 *port_addr;
-	u16 *buf = dst;
-
-	port_addr = (volatile u16 __force *)__ioport_map(port, 2);
-	while (count--)
-		*buf++ = *port_addr;
-
+	__raw_readsw(__ioport_map(port, 2), dst, count);
 	dummy_read();
 }
 
 void generic_insl(unsigned long port, void *dst, unsigned long count)
 {
-	volatile u32 *port_addr;
-	u32 *buf = dst;
-
-	port_addr = (volatile u32 __force *)__ioport_map(port, 4);
-	while (count--)
-		*buf++ = *port_addr;
-
+	__raw_readsl(__ioport_map(port, 4), dst, count);
 	dummy_read();
 }
 
@@ -145,37 +129,19 @@ void generic_outl_p(u32 b, unsigned long port)
  */
 void generic_outsb(unsigned long port, const void *src, unsigned long count)
 {
-	volatile u8 *port_addr;
-	const u8 *buf = src;
-
-	port_addr = (volatile u8 __force *)__ioport_map(port, 1);
-
-	while (count--)
-		*port_addr = *buf++;
+	__raw_writesb(__ioport_map(port, 1), src, count);
+	dummy_read();
 }
 
 void generic_outsw(unsigned long port, const void *src, unsigned long count)
 {
-	volatile u16 *port_addr;
-	const u16 *buf = src;
-
-	port_addr = (volatile u16 __force *)__ioport_map(port, 2);
-
-	while (count--)
-		*port_addr = *buf++;
-
+	__raw_writesw(__ioport_map(port, 2), src, count);
 	dummy_read();
 }
 
 void generic_outsl(unsigned long port, const void *src, unsigned long count)
 {
-	volatile u32 *port_addr;
-	const u32 *buf = src;
-
-	port_addr = (volatile u32 __force *)__ioport_map(port, 4);
-	while (count--)
-		*port_addr = *buf++;
-
+	__raw_writesl(__ioport_map(port, 4), src, count);
 	dummy_read();
 }
 
-- 
cgit v1.2.3


From 5e9377ec6f84e5334e9347e84e77d34e9a089ca7 Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 17:35:07 +0900
Subject: sh: Optimise memcpy_to/fromio for SH4

Optimise memcpy_to/fromio. This is used extensivly by MTD, so is a
worthwhile performance gain. The main savings come from not repeatedly
calling readl/writel, and doing word instead of byte at a time
transfers. Also using "movca.l" on SH4 gives a small performance win.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/io.c | 93 +++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 72 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index d0ca9684b78..4770c241c67 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -1,12 +1,9 @@
 /*
- * linux/arch/sh/kernel/io.c
+ * arch/sh/kernel/io.c - Machine independent I/O functions.
  *
- * Copyright (C) 2000  Stuart Menefy
+ * Copyright (C) 2000 - 2009  Stuart Menefy
  * Copyright (C) 2005  Paul Mundt
  *
- * Provide real functions which expand to whatever the header file defined.
- * Also definitions of machine independent IO functions.
- *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -18,33 +15,87 @@
 
 /*
  * Copy data from IO memory space to "real" memory space.
- * This needs to be optimized.
  */
 void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned long count)
 {
-	unsigned char *p = to;
-        while (count) {
-                count--;
-                *p = readb(from);
-                p++;
-                from++;
-        }
+	/*
+	 * Would it be worthwhile doing byte and long transfers first
+	 * to try and get aligned?
+	 */
+#ifdef CONFIG_CPU_SH4
+	if ((count >= 0x20) &&
+	     (((u32)to & 0x1f) == 0) && (((u32)from & 0x3) == 0)) {
+		int tmp2, tmp3, tmp4, tmp5, tmp6;
+
+		__asm__ __volatile__(
+			"1:			\n\t"
+			"mov.l	@%7+, r0	\n\t"
+			"mov.l	@%7+, %2	\n\t"
+			"movca.l r0, @%0	\n\t"
+			"mov.l	@%7+, %3	\n\t"
+			"mov.l	@%7+, %4	\n\t"
+			"mov.l	@%7+, %5	\n\t"
+			"mov.l	@%7+, %6	\n\t"
+			"mov.l	@%7+, r7	\n\t"
+			"mov.l	@%7+, r0	\n\t"
+			"mov.l	%2, @(0x04,%0)	\n\t"
+			"mov	#0x20, %2	\n\t"
+			"mov.l	%3, @(0x08,%0)	\n\t"
+			"sub	%2, %1		\n\t"
+			"mov.l	%4, @(0x0c,%0)	\n\t"
+			"cmp/hi	%1, %2		! T if 32 > count	\n\t"
+			"mov.l	%5, @(0x10,%0)	\n\t"
+			"mov.l	%6, @(0x14,%0)	\n\t"
+			"mov.l	r7, @(0x18,%0)	\n\t"
+			"mov.l	r0, @(0x1c,%0)	\n\t"
+			"bf.s	1b		\n\t"
+			" add	#0x20, %0	\n\t"
+			: "=&r" (to), "=&r" (count),
+			  "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4),
+			  "=&r" (tmp5), "=&r" (tmp6), "=&r" (from)
+			: "7"(from), "0" (to), "1" (count)
+			: "r0", "r7", "t", "memory");
+	}
+#endif
+
+	if ((((u32)to | (u32)from) & 0x3) == 0) {
+		for (; count > 3; count -= 4) {
+			*(u32 *)to = *(volatile u32 *)from;
+			to += 4;
+			from += 4;
+		}
+	}
+
+	for (; count > 0; count--) {
+		*(u8 *)to = *(volatile u8 *)from;
+		to++;
+		from++;
+	}
+
+	mb();
 }
 EXPORT_SYMBOL(memcpy_fromio);
 
 /*
  * Copy data from "real" memory space to IO memory space.
- * This needs to be optimized.
  */
 void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
 {
-	const unsigned char *p = from;
-        while (count) {
-                count--;
-                writeb(*p, to);
-                p++;
-                to++;
-        }
+	if ((((u32)to | (u32)from) & 0x3) == 0) {
+		for ( ; count > 3; count -= 4) {
+			*(volatile u32 *)to = *(u32 *)from;
+			to += 4;
+			from += 4;
+		}
+	}
+
+	for (; count > 0; count--) {
+		*(volatile u8 *)to = *(u8 *)from;
+		to++;
+		from++;
+	}
+
+	mb();
 }
 EXPORT_SYMBOL(memcpy_toio);
 
-- 
cgit v1.2.3


From a5cf9e2444ec15de5407696ff21c32dd21ca0a8d Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 17:36:24 +0900
Subject: sh: Improve comments int SH4 cache flushing code

This is a pure documentation, to try to explain why the cache flushing code
for the SH4 is implemented the way it is.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 5cfe08dbb59..7ce81618831 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -581,6 +581,17 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys,
  * Break the 1, 2 and 4 way variants of this out into separate functions to
  * avoid nearly all the overhead of having the conditional stuff in the function
  * bodies (+ the 1 and 2 way cases avoid saving any registers too).
+ *
+ * We want to eliminate unnecessary bus transactions, so this code uses
+ * a non-obvious technique.
+ *
+ * Loop over a cache way sized block of, one cache line at a time. For each
+ * line, use movca.a to cause the current cache line contents to be written
+ * back, but without reading anything from main memory. However this has the
+ * side effect that the cache is now caching that memory location. So follow
+ * this with a cache invalidate to mark the cache line invalid. And do all
+ * this with interrupts disabled, to avoid the cache line being accidently
+ * evicted while it is holding garbage.
  */
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent_per_way)
-- 
cgit v1.2.3


From 6d243dd37002bcee54841852ab1b8606fd457851 Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 18:16:56 +0900
Subject: sh: Add sys_cacheflush() call for SH CPUs.

Adds a system call to allow user code to flush code from the cache.
You can use instructions for the data side, but the iside can
only be done by a flush ROM which really only works with a direct
mapped cache. The later SH4's have 2 way Iside, so this call allows
a portable way to flush the cache.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/Kbuild      |  2 +-
 arch/sh/include/asm/cachectl.h  | 12 ++++++++++++
 arch/sh/include/asm/unistd_32.h |  2 +-
 arch/sh/include/asm/unistd_64.h |  2 +-
 arch/sh/kernel/sys_sh.c         | 43 +++++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/syscalls_32.S    |  2 +-
 arch/sh/kernel/syscalls_64.S    |  2 +-
 7 files changed, 60 insertions(+), 5 deletions(-)
 create mode 100644 arch/sh/include/asm/cachectl.h

(limited to 'arch')

diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 43910cdf78a..e121c30f797 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,6 +1,6 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += cpu-features.h
+header-y += cachectl.h cpu-features.h
 
 unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
diff --git a/arch/sh/include/asm/cachectl.h b/arch/sh/include/asm/cachectl.h
new file mode 100644
index 00000000000..305dd7082a6
--- /dev/null
+++ b/arch/sh/include/asm/cachectl.h
@@ -0,0 +1,12 @@
+#ifndef _SH_CACHECTL_H
+#define _SH_CACHECTL_H
+
+/* Definitions for the cacheflush system call.  */
+
+#define CACHEFLUSH_D_INVAL	0x1	/* invalidate (without write back) */
+#define CACHEFLUSH_D_WB		0x2	/* write back (without invalidate) */
+#define CACHEFLUSH_D_PURGE	0x3	/* writeback and invalidate */
+
+#define CACHEFLUSH_I		0x4
+
+#endif /* _SH_CACHECTL_H */
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 61d6ad93d78..925dd40d9d5 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -132,7 +132,7 @@
 #define __NR_clone		120
 #define __NR_setdomainname	121
 #define __NR_uname		122
-#define __NR_modify_ldt		123
+#define __NR_cacheflush		123
 #define __NR_adjtimex		124
 #define __NR_mprotect		125
 #define __NR_sigprocmask	126
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index a751699afda..2b84bc916bc 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -137,7 +137,7 @@
 #define __NR_clone		120
 #define __NR_setdomainname	121
 #define __NR_uname		122
-#define __NR_modify_ldt		123
+#define __NR_cacheflush		123
 #define __NR_adjtimex		124
 #define __NR_mprotect		125
 #define __NR_sigprocmask	126
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 90d00e47264..ec65dd8842b 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -25,6 +25,8 @@
 #include <asm/syscalls.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
+#include <asm/cacheflush.h>
+#include <asm/cachectl.h>
 
 static inline long
 do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
@@ -179,6 +181,47 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	return -EINVAL;
 }
 
+/* sys_cacheflush -- flush (part of) the processor cache.  */
+asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
+{
+	struct vm_area_struct *vma;
+
+	if ((op < 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
+		return -EINVAL;
+
+	/*
+	 * Verify that the specified address region actually belongs
+	 * to this process.
+	 */
+	if (addr + len < addr)
+		return -EFAULT;
+
+	down_read(&current->mm->mmap_sem);
+	vma = find_vma (current->mm, addr);
+	if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) {
+		up_read(&current->mm->mmap_sem);
+		return -EFAULT;
+	}
+
+	switch (op & CACHEFLUSH_D_PURGE) {
+		case CACHEFLUSH_D_INVAL:
+			__flush_invalidate_region((void *)addr, len);
+			break;
+		case CACHEFLUSH_D_WB:
+			__flush_wback_region((void *)addr, len);
+			break;
+		case CACHEFLUSH_D_PURGE:
+			__flush_purge_region((void *)addr, len);
+			break;
+	}
+
+	if (op & CACHEFLUSH_I)
+		flush_cache_all();
+
+	up_read(&current->mm->mmap_sem);
+	return 0;
+}
+
 asmlinkage int sys_uname(struct old_utsname __user *name)
 {
 	int err;
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index f9e21fa2f59..16ba225ede8 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -139,7 +139,7 @@ ENTRY(sys_call_table)
 	.long sys_clone		/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
-	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_cacheflush	/* x86: sys_modify_ldt */
 	.long sys_adjtimex
 	.long sys_mprotect		/* 125 */
 	.long sys_sigprocmask
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index bf420b616ae..af6fb7410c2 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -143,7 +143,7 @@ sys_call_table:
 	.long sys_clone			/* 120 */
 	.long sys_setdomainname
 	.long sys_newuname
-	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_cacheflush	/* x86: sys_modify_ldt */
 	.long sys_adjtimex
 	.long sys_mprotect		/* 125 */
 	.long sys_sigprocmask
-- 
cgit v1.2.3


From bd4fb4d4c1e4a5a2ffbf57a83817a749df1339dd Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 18:18:50 +0900
Subject: sh: Fix underflow in SH udelay() code.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/delay.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/lib/delay.c b/arch/sh/lib/delay.c
index f3ddd2133e6..faa8f86c0db 100644
--- a/arch/sh/lib/delay.c
+++ b/arch/sh/lib/delay.c
@@ -21,13 +21,14 @@ void __delay(unsigned long loops)
 
 inline void __const_udelay(unsigned long xloops)
 {
+	xloops *= 4;
 	__asm__("dmulu.l	%0, %2\n\t"
 		"sts	mach, %0"
 		: "=r" (xloops)
 		: "0" (xloops),
-		  "r" (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy)
+		  "r" (cpu_data[raw_smp_processor_id()].loops_per_jiffy * (HZ/4))
 		: "macl", "mach");
-	__delay(xloops);
+	__delay(++xloops);
 }
 
 void __udelay(unsigned long usecs)
-- 
cgit v1.2.3


From 6000fc4d6f3e55ad52cce8d76317187fe01af2aa Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 18:27:33 +0900
Subject: sh: Fixes some write posting issues in the interrupt handling for SH

It is possible for the CPU to re-enable it's interrupt block bit
before the write to the interrupt controller has actually masked out
the external interupt at the controller. We get around this by
reading back from the interrupt controller which will ensure the
write has happened.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/irq/ipr.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 808d99a48ef..c1508a90fc6 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -35,6 +35,7 @@ static void disable_ipr_irq(unsigned int irq)
 	unsigned long addr = get_ipr_desc(irq)->ipr_offsets[p->ipr_idx];
 	/* Set the priority in IPR to 0 */
 	__raw_writew(__raw_readw(addr) & (0xffff ^ (0xf << p->shift)), addr);
+	(void)__raw_readw(addr);	/* Read back to flush write posting */
 }
 
 static void enable_ipr_irq(unsigned int irq)
-- 
cgit v1.2.3


From a1fce732359b80ead84efba23059a5f1b572b85a Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 18:29:25 +0900
Subject: sh: Fix overzealous checking in __ioremap()

Allow peripherals before the start of RAM to be remapped.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/ioremap_32.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index da2f4186f2c..c3250614e3a 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -57,14 +57,6 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	if (is_pci_memory_fixed_range(phys_addr, size))
 		return (void __iomem *)phys_addr;
 
-#if !defined(CONFIG_PMB_FIXED)
-	/*
-	 * Don't allow anybody to remap normal RAM that we're using..
-	 */
-	if (phys_addr < virt_to_phys(high_memory))
-		return NULL;
-#endif
-
 	/*
 	 * Mappings have to be page-aligned
 	 */
-- 
cgit v1.2.3


From ffad9d7a54a5e809007135595c778715aa0fb07a Mon Sep 17 00:00:00 2001
From: Stuart Menefy <stuart.menefy@st.com>
Date: Mon, 24 Aug 2009 18:39:39 +0900
Subject: sh: Fix problems with cache flushing when cache is in write-through
 mode

Change the method used to flush the cache in write-through mode to
avoid corrupted data being written back to memory.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 7ce81618831..397c1030c7a 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -592,6 +592,20 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys,
  * this with a cache invalidate to mark the cache line invalid. And do all
  * this with interrupts disabled, to avoid the cache line being accidently
  * evicted while it is holding garbage.
+ *
+ * This also breaks in a number of circumstances:
+ * - if there are modifications to the region of memory just above
+ *   empty_zero_page (for example because a breakpoint has been placed
+ *   there), then these can be lost.
+ *
+ *   This is because the the memory address which the cache temporarily
+ *   caches in the above description is empty_zero_page. So the
+ *   movca.l hits the cache (it is assumed that it misses, or at least
+ *   isn't dirty), modifies the line and then invalidates it, losing the
+ *   required change.
+ *
+ * - If caches are disabled or configured in write-through mode, then
+ *   the movca.l writes garbage directly into memory.
  */
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent_per_way)
@@ -641,6 +655,25 @@ static void __flush_dcache_segment_1way(unsigned long start,
 	} while (a0 < a0e);
 }
 
+#ifdef CONFIG_CACHE_WRITETHROUGH
+/* This method of cache flushing avoids the problems discussed
+ * in the comment above if writethrough caches are enabled. */
+static void __flush_dcache_segment_2way(unsigned long start,
+					unsigned long extent_per_way)
+{
+	unsigned long array_addr;
+
+	array_addr = CACHE_OC_ADDRESS_ARRAY |
+		(start & cpu_data->dcache.entry_mask);
+
+	while (extent_per_way) {
+		ctrl_outl(0, array_addr);
+		ctrl_outl(0, array_addr + cpu_data->dcache.way_incr);
+		array_addr += cpu_data->dcache.linesz;
+		extent_per_way -= cpu_data->dcache.linesz;
+	}
+}
+#else
 static void __flush_dcache_segment_2way(unsigned long start,
 					unsigned long extent_per_way)
 {
@@ -699,6 +732,7 @@ static void __flush_dcache_segment_2way(unsigned long start,
 		a1 += linesz;
 	} while (a0 < a0e);
 }
+#endif
 
 static void __flush_dcache_segment_4way(unsigned long start,
 					unsigned long extent_per_way)
-- 
cgit v1.2.3


From 788e6af37a4ace8721eda72e4abe66fe0f6b49fd Mon Sep 17 00:00:00 2001
From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Date: Mon, 24 Aug 2009 18:59:09 +0900
Subject: sh: fix sys_cacheflush error checking

sys_cacheflush should return with EINVAL if the cache parameter is not
one of ICACHE, DCACHE or BCACHE.
So, we need to include 0 in the first check.

It also adds the three definitions above as wrapper of the existent macros.

PS: ltp cacheflush01 test now passes.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cachectl.h | 7 +++++++
 arch/sh/kernel/sys_sh.c        | 2 +-
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cachectl.h b/arch/sh/include/asm/cachectl.h
index 305dd7082a6..6ffb4b7a212 100644
--- a/arch/sh/include/asm/cachectl.h
+++ b/arch/sh/include/asm/cachectl.h
@@ -9,4 +9,11 @@
 
 #define CACHEFLUSH_I		0x4
 
+/*
+ * Options for cacheflush system call
+ */
+#define ICACHE	CACHEFLUSH_I		/* flush instruction cache */
+#define DCACHE	CACHEFLUSH_D_PURGE	/* writeback and flush data cache */
+#define BCACHE	(ICACHE|DCACHE)		/* flush both caches */
+
 #endif /* _SH_CACHECTL_H */
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index ec65dd8842b..8aa5d1ceaf1 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -186,7 +186,7 @@ asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 {
 	struct vm_area_struct *vma;
 
-	if ((op < 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
+	if ((op <= 0) || (op > (CACHEFLUSH_D_PURGE|CACHEFLUSH_I)))
 		return -EINVAL;
 
 	/*
-- 
cgit v1.2.3


From 10f02d1168585edf66229bb2ec90a42f32667a78 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sun, 23 Aug 2009 23:17:27 +0400
Subject: x86: uv: Clean up uv_ptc_init(), use proc_create()

create_proc_entry() is getting duhprecated.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: cpw@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 77b9689f8ed..503c1f2e883 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -640,13 +640,13 @@ static int __init uv_ptc_init(void)
 	if (!is_uv_system())
 		return 0;
 
-	proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL);
+	proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
+				  &proc_uv_ptc_operations);
 	if (!proc_uv_ptc) {
 		printk(KERN_ERR "unable to create %s proc entry\n",
 		       UV_PTC_BASENAME);
 		return -EINVAL;
 	}
-	proc_uv_ptc->proc_fops = &proc_uv_ptc_operations;
 	return 0;
 }
 
-- 
cgit v1.2.3


From 05ecd5a1f76c183cca381705b3adb7d77c9a0439 Mon Sep 17 00:00:00 2001
From: Pawel Moll <pawel.moll@st.com>
Date: Mon, 24 Aug 2009 19:52:38 +0900
Subject: sh: Simplify "multi-evt" interrupt handling.

This patch changes the way in which "multi-evt" interrups are handled.
The intc_evt2irq_table and related intc_evt2irq() have been removed and
the "redirecting" handler is installed for the coupled interrupts.

Thanks to that the do_IRQ() function don't have to use another level
of indirection for all the interrupts...

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 278c68c6048..d1053392e28 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -114,7 +114,7 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
 
 	irq_enter();
-	irq = irq_demux(intc_evt2irq(irq));
+	irq = irq_demux(evt2irq(irq));
 
 #ifdef CONFIG_IRQSTACKS
 	curctx = (union irq_ctx *)current_thread_info();
-- 
cgit v1.2.3


From f13327864f94c3a0e6acca923df537d20059639f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 24 Aug 2009 22:48:27 +0900
Subject: sh: Move the FTRACE_SYSCALL_MAX definition in to asm/ftrace.h.

Needed by ftrace changes in -tip.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/ftrace.h | 1 +
 arch/sh/kernel/ftrace.c      | 2 --
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
index 7e0bcc4d4a9..3c2ede3690d 100644
--- a/arch/sh/include/asm/ftrace.h
+++ b/arch/sh/include/asm/ftrace.h
@@ -4,6 +4,7 @@
 #ifdef CONFIG_FUNCTION_TRACER
 
 #define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+#define FTRACE_SYSCALL_MAX	(NR_syscalls - 1)
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 6647dfcb781..a3dcc6d5d25 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -283,8 +283,6 @@ static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
 	return NULL;
 }
 
-#define FTRACE_SYSCALL_MAX	(NR_syscalls - 1)
-
 struct syscall_metadata *syscall_nr_to_meta(int nr)
 {
 	if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0)
-- 
cgit v1.2.3


From 3e475f579e56caf57cadc0cc995c152f9da641a9 Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Mon, 17 Aug 2009 23:34:10 -1000
Subject: [ARM] Kirkwood: __init requires linux/init.h
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Include linux/init.h for __init to fix this error:

CC [M]  drivers/net/wireless/wl12xx/boot.o
In file included from arch/arm/mach-kirkwood/include/mach/gpio.h:13,
                 from arch/arm/include/asm/gpio.h:5,
                 from include/linux/gpio.h:7,
                 from drivers/net/wireless/wl12xx/boot.c:24:
arch/arm/plat-orion/include/plat/gpio.h:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘orion_gpio_init’
make[6]: *** [drivers/net/wireless/wl12xx/boot.o] Error 1
make[5]: *** [drivers/net/wireless/wl12xx] Error 2

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/plat-orion/include/plat/gpio.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 9646a94ed3d..07c430fdc9e 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -11,6 +11,8 @@
 #ifndef __PLAT_GPIO_H
 #define __PLAT_GPIO_H
 
+#include <linux/init.h>
+
 /*
  * GENERIC_GPIO primitives.
  */
-- 
cgit v1.2.3


From c55bf102b675c94edef006ce487d909669221d90 Mon Sep 17 00:00:00 2001
From: John Holland <john.holland@cellent-fs.de>
Date: Wed, 19 Aug 2009 13:24:03 -1000
Subject: [ARM] Kirkwood: enable eSATA on QNAP TS-219P

Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware
allowing the use of the discrete eSATA controller connected to the PCIe
bus in the TS-219P.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/kirkwood_defconfig  | 2 +-
 arch/arm/mach-kirkwood/ts219-setup.c | 9 +++++++++
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0a1abb978d7..af74cc2de8b 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -629,7 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_AHCI=y
 # CONFIG_SATA_SIL24 is not set
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 01aa213c0a6..ec1a64f263d 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -206,6 +206,15 @@ static void __init qnap_ts219_init(void)
 
 }
 
+static int __init ts219_pci_init(void)
+{
+   if (machine_is_ts219())
+           kirkwood_pcie_init();
+
+   return 0;
+}
+subsys_initcall(ts219_pci_init);
+
 MACHINE_START(TS219, "QNAP TS-119/TS-219")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
 	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-- 
cgit v1.2.3


From a6a06f7b577f89d0b916c5ccaff67ca5ed444a78 Mon Sep 17 00:00:00 2001
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 21 Aug 2009 04:34:45 -0400
Subject: x86: Fix an incorrect argument of reserve_bootmem()

This line looks suspicious, because if this is true, then the
'flags' parameter of function reserve_bootmem_generic() will be
unused when !CONFIG_NUMA. I don't think this is what we want.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: akpm@linux-foundation.org
LKML-Reference: <20090821083709.5098.52505.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 6176fe8f29e..ea56b8cbb6a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -796,7 +796,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
 		return ret;
 
 #else
-	reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+	reserve_bootmem(phys, len, flags);
 #endif
 
 	if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
-- 
cgit v1.2.3


From 8934210cfe925f0d3e3089c69e9e88021324801b Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@denx.de>
Date: Fri, 7 Aug 2009 08:41:15 +0200
Subject: powerpc/82xx: mgcoge - updated defconfig

- add I2C support
- add FCC1 and FCC2 support

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/mgcoge_defconfig | 86 ++++++++++++++++++++++++++++++++---
 1 file changed, 80 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index e9491c1c3f3..30b68bfaceb 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:51 2009
+# Linux kernel version: 2.6.31-rc5
+# Fri Aug  7 08:19:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -158,6 +158,7 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -506,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -582,7 +584,8 @@ CONFIG_PHYLIB=y
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_MACE is not set
@@ -608,8 +611,8 @@ CONFIG_MII=y
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
-# CONFIG_FS_ENET_HAS_FCC is not set
-# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -680,7 +683,68 @@ CONFIG_HW_RANDOM=y
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_POWERMAC is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CPM=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_PCF8575 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -699,6 +763,9 @@ CONFIG_GPIOLIB=y
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
 # PCI GPIO expanders:
@@ -727,7 +794,14 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
-- 
cgit v1.2.3


From fc4bdb35fba1c8f464fd85b94a5059e752fc85d4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 14 Aug 2009 09:38:34 -0500
Subject: powerpc/booke: Move MMUCSR definition into mmu-book3e.h

The MMUCSR is now defined as part of the Book-3E architecture so we
can move it into mmu-book3e.h and add some of the additional bits
defined by the architecture specs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h | 12 ++++++++++++
 arch/powerpc/include/asm/reg_booke.h  |  6 ------
 arch/powerpc/mm/tlb_nohash_low.S      |  2 --
 3 files changed, 12 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index d7458046936..74695816205 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -114,6 +114,18 @@
 
 #define MAS7_RPN		0xFFFFFFFF
 
+/* Bit definitions for MMUCSR0 */
+#define MMUCSR0_TLB1FI	0x00000002	/* TLB1 Flash invalidate */
+#define MMUCSR0_TLB0FI	0x00000004	/* TLB0 Flash invalidate */
+#define MMUCSR0_TLB2FI	0x00000040	/* TLB2 Flash invalidate */
+#define MMUCSR0_TLB3FI	0x00000020	/* TLB3 Flash invalidate */
+#define MMUCSR0_TLBFI	(MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
+			 MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
+#define MMUCSR0_TLB0PS	0x00000780	/* TLB0 Page Size */
+#define MMUCSR0_TLB1PS	0x00007800	/* TLB1 Page Size */
+#define MMUCSR0_TLB2PS	0x00078000	/* TLB2 Page Size */
+#define MMUCSR0_TLB3PS	0x00780000	/* TLB3 Page Size */
+
 /* TLBnCFG encoding */
 #define TLBnCFG_N_ENTRY		0x00000fff	/* number of entries */
 #define TLBnCFG_HES		0x00002000	/* HW select supported */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 2c9c706e644..9bb81d99b76 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -430,12 +430,6 @@
 #define L2CSR0_L2LOA	0x00000080	/* L2 Cache Lock Overflow Allocate */
 #define L2CSR0_L2LO	0x00000020	/* L2 Cache Lock Overflow */
 
-/* Bit definitions for MMUCSR0 */
-#define MMUCSR0_TLB1FI	0x00000002	/* TLB1 Flash invalidate */
-#define MMUCSR0_TLB0FI	0x00000004	/* TLB0 Flash invalidate */
-#define MMUCSR0_TLB2FI	0x00000040	/* TLB2 Flash invalidate */
-#define MMUCSR0_TLB3FI	0x00000020	/* TLB3 Flash invalidate */
-
 /* Bit definitions for SGR. */
 #define SGR_NORMAL	0		/* Speculative fetching allowed. */
 #define SGR_GUARDED	1		/* Speculative fetching disallowed. */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 7bcd9fbf6cc..bbdc5b577b8 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -124,8 +124,6 @@ _GLOBAL(_tlbil_pid)
  * to have the larger code path before the _SECTION_ELSE
  */
 
-#define MMUCSR0_TLBFI	(MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
-			 MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
 /*
  * Flush MMU TLB on the local processor
  */
-- 
cgit v1.2.3


From fb8e3e1fe1df963b6c1ab8610682737ccae96ef0 Mon Sep 17 00:00:00 2001
From: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date: Fri, 7 Aug 2009 21:05:16 +0530
Subject: powerpc/85xx: Add support for P2020RDB board

Add support for the P2020RDB reference board from Freescale.

Overview of P2020RDB platform
	- DDR
	  DDR2 1G
	- NOR Flash
	  16MByte
	- NAND Flash
	  32MByte
	- 3 Ethernet interfaces
	  1) etSEC1
		- RGMII
		- connected to a 5 port Vitesse Switch(VSC7385)
		- Switch is memory mapped through eLBC interface(CS#2)
		- IRQ1
	  2) etSEC2
		- SGMII
		- connected to VSC8221
		- IRQ2
	  3) etSEC3
		- RGMII
		- connected to VSC8641
		- IRQ3
	- 2 1X PCIe interfaces
	- SD/MMC ,USB
	- SPI EEPROM
	- Serial I2C EEPROM

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/p2020rdb.dts        | 586 ++++++++++++++++++++++++++++++
 arch/powerpc/configs/mpc85xx_defconfig    |   1 +
 arch/powerpc/platforms/85xx/Kconfig       |   9 +
 arch/powerpc/platforms/85xx/Makefile      |   3 +-
 arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 141 +++++++
 5 files changed, 739 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/boot/dts/p2020rdb.dts
 create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_rdb.c

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
new file mode 100644
index 00000000000..da4cb0d8d21
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -0,0 +1,586 @@
+/*
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 256KB for Vitesse 7385 Switch firmware */
+				reg = <0x0 0x00040000>;
+				label = "NOR (RO) Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@40000 {
+				/* 256KB for DTB Image */
+				reg = <0x00040000 0x00040000>;
+				label = "NOR (RO) DTB Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 3.5 MB for Linux Kernel Image */
+				reg = <0x00080000 0x00380000>;
+				label = "NOR (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@400000 {
+				/* 11MB for JFFS2 based Root file System */
+				reg = <0x00400000 0x00b00000>;
+				label = "NOR (RW) JFFS2 Root File System";
+			};
+
+			partition@f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x00f00000 0x00100000>;
+				label = "NOR (RO) U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p2020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 4MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00400000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@a00000 {
+				/* 7MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00700000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 15MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00f00000>;
+				label = "NAND (RW) Writable User area";
+			};
+		};
+
+		L2switch@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				modal = "s25sl128b";
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x1>;
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index ada595898af..ee6acc6557f 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
+CONFIG_MPC85xx_RDB=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 # CONFIG_XES_MPC85xx is not set
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index a9b41668897..d3a975e8fd3 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -55,6 +55,15 @@ config MPC85xx_DS
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
+config MPC85xx_RDB
+	bool "Freescale MPC85xx RDB"
+	select PPC_I8259
+	select DEFAULT_UIMAGE
+	select FSL_ULI1575
+	select SWIOTLB
+	help
+	  This option enables support for the MPC85xx RDB (P2020 RDB) board
+
 config SOCRATES
 	bool "Socrates"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 835733f2b12..9098aea0cf3 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -9,10 +9,11 @@ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
 obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
+obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
-obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
\ No newline at end of file
+obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
new file mode 100644
index 00000000000..c8468de4acf
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -0,0 +1,141 @@
+/*
+ * MPC85xx RDB Board Setup
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+
+void __init mpc85xx_rdb_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+		  MPIC_PRIMARY | MPIC_WANTS_RESET |
+		  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+		  MPIC_SINGLE_DEST_CPU,
+		  0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+
+}
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+static void __init mpc85xx_rdb_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
+			fsl_add_bridge(np, 0);
+	}
+
+#endif
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
+	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
+}
+
+static struct of_device_id __initdata mpc85xxrdb_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
+static int __init mpc85xxrdb_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
+}
+machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2020_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P2020RDB"))
+		return 1;
+	return 0;
+}
+
+define_machine(p2020_rdb) {
+	.name			= "P2020 RDB",
+	.probe			= p2020_rdb_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
-- 
cgit v1.2.3


From 4de124446b4d68edd6cb747495234be915d56a29 Mon Sep 17 00:00:00 2001
From: Liang Li <liang.li@windriver.com>
Date: Wed, 12 Aug 2009 09:34:28 -0400
Subject: powerpc/83xx: Remove second USB node from SBC834x DTS

Since only one of the SoC USB devices is brought out to a physical
connector on the board, remove the 2nd (USB-DR) node from the DTS.
Having it present and USB enabled will cause a hang at boot.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8349.dts | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 2d9fa68f641..d93e5beab73 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -146,18 +146,6 @@
 			phy_type = "ulpi";
 			port0;
 		};
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
-		usb@23000 {
-			device_type = "usb";
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "otg";
-			phy_type = "ulpi";
-		};
 
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
-- 
cgit v1.2.3


From 31ff09b7a60bbc80b5df941ec1a12502861b4da9 Mon Sep 17 00:00:00 2001
From: Liang Li <liang.li@windriver.com>
Date: Wed, 12 Aug 2009 09:34:29 -0400
Subject: powerpc/83xx: Add localbus node and MTD partitions for SBC834x

There is 8MB flash, 8kB EEPROM and 128MB SDRAM on the sbc834x
local bus, so add a localbus node in DTS with MTD partitions.

The recent U-boot commit fe613cdd4eb moves u-boot to the beginning
of flash, hence the legacy label on the partition at the end of flash.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8349.dts | 40 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index d93e5beab73..b83036a8d0e 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -265,6 +265,46 @@
 		};
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349-localbus", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xff800000 0x00800000		/* 8MB Flash */
+			  0x1 0x0 0xf8000000 0x00002000		/* 8KB EEPROM */
+			  0x2 0x0 0x10000000 0x04000000		/* 64MB SDRAM */
+			  0x3 0x0 0x10000000 0x04000000>;	/* 64MB SDRAM */
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "intel,28F640J3A", "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x006c0000>;
+			};
+
+			partition@700000 {
+				label = "legacy u-boot";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+
+		};
+	};
+
 	pci0: pci@e0008500 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
-- 
cgit v1.2.3


From 58dfc497b9357ec00c879b775c02f4eab19bcecb Mon Sep 17 00:00:00 2001
From: Liang Li <liang.li@windriver.com>
Date: Wed, 12 Aug 2009 09:34:30 -0400
Subject: powerpc/83xx: Fix incorrect PCI interrupt map in SBC834x DTS

Allows interrupts to occur on the sbc834x. Currently PCI devices
get assigned an incorrect IRQ and so the interrupt count never
increases. This was tested with the 82546GB based dual port E1000
PCI-X NIC which uses two distinct IRQ lines on the one card.

root@localhost:/root> cat /proc/interrupts | grep eth
17:         78   IPIC   Level     eth1
48:      27121   IPIC   Level     eth0

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8349.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index b83036a8d0e..0dc90f9bd81 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -310,10 +310,10 @@
 		interrupt-map = <
 
 				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8>;
+				 0x8800 0x0 0x0 0x1 &ipic 48 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 17 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
 
 		interrupt-parent = <&ipic>;
 		interrupts = <0x42 0x8>;
-- 
cgit v1.2.3


From 944ac03804c4c9c0879347098ea458fd57f38687 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Wed, 12 Aug 2009 09:34:31 -0400
Subject: powerpc/83xx: sbc8349 - update defconfig, enable MTD, USB storage

With flash partition entries in the DTS file, MTD might as well
be enabled in the defconfig.  In a similar vein, enable USB and
enough related options (SCSI/ext2/ext3) so that a user can read
and write to a generic USB flash drive as well.

Also, this board only has the two default SOC UARTs, so adjust the
UART config accordingly.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/83xx/sbc834x_defconfig | 320 ++++++++++++++++++++++++++--
 1 file changed, 308 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index a592b5efdc4..3a68f861b1b 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:13 2009
+# Linux kernel version: 2.6.31-rc5
+# Tue Aug 11 19:57:51 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -420,7 +420,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -436,6 +519,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -468,9 +552,38 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -578,11 +691,21 @@ CONFIG_GIANFAR=y
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
 #
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -633,9 +756,9 @@ CONFIG_DEVKMEM=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -700,6 +823,7 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Graphics adapter I2C/DDC channel drivers
@@ -814,6 +938,11 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -856,12 +985,134 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
 # CONFIG_HID_PID is not set
 
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
 #
 # Special HID drivers
 #
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -882,9 +1133,14 @@ CONFIG_HID=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -940,6 +1196,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -977,7 +1234,46 @@ CONFIG_RPCSEC_GSS_KRB5=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
-- 
cgit v1.2.3


From 7792da8567a70be3280c8eef916334e6923815e3 Mon Sep 17 00:00:00 2001
From: Liang Li <Liang.Li@windriver.com>
Date: Fri, 14 Aug 2009 10:36:14 -0400
Subject: powerpc/85xx: sbc8560 - Fix warm reboot with board specific reset
 function

The existing fsl_rstcr_restart function is not applicable to the
mpc8560. The Global Utilities Block on this earlier CPU doesn't have
the control/reset register at 0xe00b0.  This implements a board
specific reset function that uses the RCR(Reset Control Register) of
the sbc8560's EPLD to do a reset.

Signed-off-by: Liang Li <Liang.Li@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/sbc8560.c | 39 ++++++++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index cc27807a8b6..a5ad1c7794b 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -267,6 +267,43 @@ arch_initcall(sbc8560_rtc_init);
 
 #endif	/* M48T59 */
 
+static __u8 __iomem *brstcr;
+
+static int __init sbc8560_bdrstcr_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+
+	np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
+	if (np == NULL) {
+		printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
+		return -ENODEV;
+	}
+
+	of_address_to_resource(np, 0, &res);
+
+	printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
+
+	brstcr = ioremap(res.start, res.end - res.start);
+	if(!brstcr)
+		printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
+
+	of_node_put(np);
+
+	return 0;
+}
+
+arch_initcall(sbc8560_bdrstcr_init);
+
+void sbc8560_rstcr_restart(char * cmd)
+{
+	local_irq_disable();
+	if(brstcr)
+		clrbits8(brstcr, 0x80);
+
+	while(1);
+}
+
 define_machine(sbc8560) {
 	.name			= "SBC8560",
 	.probe			= sbc8560_probe,
@@ -274,7 +311,7 @@ define_machine(sbc8560) {
 	.init_IRQ		= sbc8560_pic_init,
 	.show_cpuinfo		= sbc8560_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
-	.restart		= fsl_rstcr_restart,
+	.restart		= sbc8560_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
-- 
cgit v1.2.3


From 46c4c229ecf470202a1f4fd2402283cb038864bf Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri, 14 Aug 2009 12:13:53 -0400
Subject: powerpc/85xx: issue fsl_soc reboot warning only when applicable

Some CPU, like the MPC8560 don't have a RSTCR in the Global
Utilities Block.  These boards will implement their own reboot
call, and not use this code, so we should only warn about the
absence of the GUTS RSTCR when the default reboot code is used.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_soc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 95dbc643c4f..adca4affcf1 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -37,6 +37,7 @@
 #include <asm/irq.h>
 #include <asm/time.h>
 #include <asm/prom.h>
+#include <asm/machdep.h>
 #include <sysdev/fsl_soc.h>
 #include <mm/mmu_decl.h>
 #include <asm/cpm2.h>
@@ -383,8 +384,9 @@ static int __init setup_rstcr(void)
 		if (!rstcr)
 			printk (KERN_EMERG "Error: reset control register "
 					"not mapped!\n");
-	} else
-		printk (KERN_INFO "rstcr compatible register does not exist!\n");
+	} else if (ppc_md.restart == fsl_rstcr_restart)
+		printk(KERN_ERR "No RSTCR register, warm reboot won't work\n");
+
 	if (np)
 		of_node_put(np);
 	return 0;
-- 
cgit v1.2.3


From c9c419773d2a84af8ff2f91c859d3d16592c947b Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri, 14 Aug 2009 12:13:54 -0400
Subject: powerpc/85xx: sbc8560 - remove "has-rstcr" from global utilities
 block

The earlier mpc8560 CPUs don't have the RSTCR at 0xe00b0
in the GUTS.  The generic reboot code uses this tag to
determine if it should be using the RSTCR for reboot, so
remove it from the board definition.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8560.dts | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 239d57a55cf..9e13ed8a119 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -303,7 +303,6 @@
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8560-guts";
 			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
 		};
 	};
 
-- 
cgit v1.2.3


From 0ceb4c3e3f1ccaf121851e33c3ea269b8ad0f219 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 Aug 2009 07:32:39 +0900
Subject: timekeeping: Fix up read_persistent_clock() breakage on sh

The recent commit "timekeeping: Increase granularity of
read_persistent_clock()" introduced read_persistent_clock()
rework which inadvertently broke the sh conversion:

	arch/sh/kernel/time.c:45: error: passing argument 1 of 'rtc_sh_get_time' from incompatible pointer type
	distcc[13470] ERROR: compile arch/sh/kernel/time.c on sprygo/32 failed
	make[2]: *** [arch/sh/kernel/time.o] Error 1

This trivial fix gets it working again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <20090824223239.GB20832@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sh/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 3f4706aa975..0e0e8581cf7 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -41,7 +41,7 @@ int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
 #ifdef CONFIG_GENERIC_CMOS_UPDATE
 void read_persistent_clock(struct timespec *ts)
 {
-	rtc_sh_get_time(&ts);
+	rtc_sh_get_time(ts);
 }
 
 int update_persistent_clock(struct timespec now)
-- 
cgit v1.2.3


From c68e3206862f647117a46a73af76764d750c05bd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 25 Aug 2009 18:39:33 +0900
Subject: sh: Fix an off-by-1 in FTRACE_SYSCALL_MAX.

This is supposed to be the equivalent of __NR_syscalls, not
__NR_syscalls -1. The x86 code this was based on had simply fallen
out of sync at the time this was implemented. Fix it up now.

As a result, tracing of __NR_perf_counter_open works as advertised.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/ftrace.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
index 3c2ede3690d..12f3a31f20a 100644
--- a/arch/sh/include/asm/ftrace.h
+++ b/arch/sh/include/asm/ftrace.h
@@ -4,7 +4,7 @@
 #ifdef CONFIG_FUNCTION_TRACER
 
 #define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
-#define FTRACE_SYSCALL_MAX	(NR_syscalls - 1)
+#define FTRACE_SYSCALL_MAX	NR_syscalls
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
-- 
cgit v1.2.3


From c62e43202e7cf50ca24bce58b255df7bf5de69d0 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Tue, 25 Aug 2009 14:50:53 +0100
Subject: x86: Fix build with older binutils and consolidate linker script

binutils prior to 2.17 can't deal with the currently possible
situation of a new segment following the per-CPU segment, but
that new segment being empty - objcopy misplaces the .bss (and
perhaps also the .brk) sections outside of any segment.

However, the current ordering of sections really just appears
to be the effect of cumulative unrelated changes; re-ordering
things allows to easily guarantee that the segment following
the per-CPU one is non-empty, and at once eliminates the need
for the bogus data.init2 segment.

Once touching this code, also use the various data section
helper macros from include/asm-generic/vmlinux.lds.h.

-v2: fix !SMP builds.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: <sam@ravnborg.org>
LKML-Reference: <4A94085D02000078000119A5@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vmlinux.lds.S | 126 ++++++++++++++++--------------------------
 1 file changed, 47 insertions(+), 79 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 78d185d797d..9fc178255c0 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -46,11 +46,10 @@ PHDRS {
 	data PT_LOAD FLAGS(7);          /* RWE */
 #ifdef CONFIG_X86_64
 	user PT_LOAD FLAGS(7);          /* RWE */
-	data.init PT_LOAD FLAGS(7);     /* RWE */
 #ifdef CONFIG_SMP
 	percpu PT_LOAD FLAGS(7);        /* RWE */
 #endif
-	data.init2 PT_LOAD FLAGS(7);    /* RWE */
+	init PT_LOAD FLAGS(7);          /* RWE */
 #endif
 	note PT_NOTE FLAGS(0);          /* ___ */
 }
@@ -103,65 +102,43 @@ SECTIONS
 		__stop___ex_table = .;
 	} :text = 0x9090
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	/* Data */
-	. = ALIGN(PAGE_SIZE);
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {
 		/* Start of data section */
 		_sdata = .;
-		DATA_DATA
-		CONSTRUCTORS
-	} :data
+
+		/* init_task */
+		INIT_TASK_DATA(THREAD_SIZE)
 
 #ifdef CONFIG_X86_32
-	/* 32 bit has nosave before _edata */
-	. = ALIGN(PAGE_SIZE);
-	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-	}
+		/* 32 bit has nosave before _edata */
+		NOSAVE_DATA
 #endif
 
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-		*(.data.page_aligned)
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 		*(.data.idt)
-	}
 
-#ifdef CONFIG_X86_32
-	. = ALIGN(32);
-#else
-	. = ALIGN(PAGE_SIZE);
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
-#endif
-	.data.cacheline_aligned :
-		AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-		*(.data.cacheline_aligned)
-	}
+		CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
 
-	/* rarely changed data like cpu maps */
-#ifdef CONFIG_X86_32
-	. = ALIGN(32);
-#else
-	. = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
-#endif
-	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-		*(.data.read_mostly)
+		DATA_DATA
+		CONSTRUCTORS
+
+		/* rarely changed data like cpu maps */
+		READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
 
 		/* End of data section */
 		_edata = .;
-	}
+	} :data
 
 #ifdef CONFIG_X86_64
 
 #define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
-                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
-                            SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
+                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
+                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
 
 #define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
 #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
@@ -227,35 +204,29 @@ SECTIONS
 
 #endif /* CONFIG_X86_64 */
 
-	/* init_task */
-	. = ALIGN(THREAD_SIZE);
-	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		*(.data.init_task)
+	/* Init code and data - will be freed after init */
+	. = ALIGN(PAGE_SIZE);
+	.init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
+		__init_begin = .; /* paired with __init_end */
 	}
-#ifdef CONFIG_X86_64
-	 :data.init
-#endif
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
 	/*
-	 * smp_locks might be freed after init
-	 * start/end must be page aligned
+	 * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
+	 * output PHDR, so the next output section - .init.text - should
+	 * start another segment - init.
 	 */
-	. = ALIGN(PAGE_SIZE);
-	.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
-		__smp_locks = .;
-		*(.smp_locks)
-		__smp_locks_end = .;
-		. = ALIGN(PAGE_SIZE);
-	}
+	PERCPU_VADDR(0, :percpu)
+#endif
 
-	/* Init code and data - will be freed after init */
-	. = ALIGN(PAGE_SIZE);
 	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		__init_begin = .; /* paired with __init_end */
 		_sinittext = .;
 		INIT_TEXT
 		_einittext = .;
 	}
+#ifdef CONFIG_X86_64
+	:init
+#endif
 
 	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
 		INIT_DATA
@@ -326,17 +297,7 @@ SECTIONS
 	}
 #endif
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
-	/*
-	 * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
-	 * output PHDR, so the next output section - __data_nosave - should
-	 * start another section data.init2.  Also, pda should be at the head of
-	 * percpu area.  Preallocate it and define the percpu offset symbol
-	 * so that it can be accessed as a percpu variable.
-	 */
-	. = ALIGN(PAGE_SIZE);
-	PERCPU_VADDR(0, :percpu)
-#else
+#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
 	PERCPU(PAGE_SIZE)
 #endif
 
@@ -347,15 +308,22 @@ SECTIONS
 		__init_end = .;
 	}
 
+	/*
+	 * smp_locks might be freed after init
+	 * start/end must be page aligned
+	 */
+	. = ALIGN(PAGE_SIZE);
+	.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+		__smp_locks = .;
+		*(.smp_locks)
+		__smp_locks_end = .;
+		. = ALIGN(PAGE_SIZE);
+	}
+
 #ifdef CONFIG_X86_64
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		. = ALIGN(PAGE_SIZE);
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-	} :data.init2
-	/* use another section data.init2, see PERCPU_VADDR() above */
+		NOSAVE_DATA
+	}
 #endif
 
 	/* BSS */
-- 
cgit v1.2.3


From 005155b1f626d2b2d7932e4afdf4fead168c6888 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 25 Aug 2009 15:35:12 +0200
Subject: x86: Fix x86_model test in es7000_apic_is_cluster()

For the x86_model to be greater than 6 or less than 12 is
logically always true.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/es7000_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 69328ac8de9..420f95da7bf 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -167,7 +167,7 @@ static int es7000_apic_is_cluster(void)
 {
 	/* MPENTIUMIII */
 	if (boot_cpu_data.x86 == 6 &&
-	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11))
+	    (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.3


From ec80fb2d89a0a93db46bdc968b6a849be5340531 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:38:18 +0400
Subject: powerpc/85xx: Add eSDHC support for MPC8536DS boards

This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8536ds.dts     | 8 ++++++++
 arch/powerpc/boot/dts/mpc8536ds_36b.dts | 8 ++++++++
 2 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 22caf69e6ef..815cebb2e3e 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index 113ed8b7c89..d95b26021e6 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-- 
cgit v1.2.3


From a70e88bc78d220a506394058d48cedd1c491a256 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:28:10 +0400
Subject: powerpc/82xx: Fix BCSR bits for MPC8272ADS boards

mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but
according to User's Guide the bits are wrong for MPC8272ADS boards
(I guess definitions from pq2ads should only be used for PQ2FADS
boards).

So, let's introduce our own definitions for MPC8272ADS, and don't
include pq2ads.h.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/82xx/mpc8272_ads.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 8054c685d32..67e2184f424 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -29,7 +29,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/cpm2_pic.h>
 
-#include "pq2ads.h"
 #include "pq2.h"
 
 static void __init mpc8272_ads_pic_init(void)
@@ -144,6 +143,13 @@ static void __init mpc8272_ads_setup_arch(void)
 		return;
 	}
 
+#define BCSR1_FETHIEN		0x08000000
+#define BCSR1_FETH_RST		0x04000000
+#define BCSR1_RS232_EN1		0x02000000
+#define BCSR1_RS232_EN2		0x01000000
+#define BCSR3_FETHIEN2		0x10000000
+#define BCSR3_FETH2_RST		0x08000000
+
 	clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
 	setbits32(&bcsr[1], BCSR1_FETH_RST);
 
-- 
cgit v1.2.3


From 818fcac554397a04987d49e2bd2dfc2d394b265c Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:28:17 +0400
Subject: powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards

- Add usb node;
- Configure pins and clocks;
- Enable USB function in BCSR.

The support was successfully tested using serial and ethernet gadget
drivers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8272ads.dts      |  8 ++++++++
 arch/powerpc/platforms/82xx/mpc8272_ads.c | 14 ++++++++++++++
 2 files changed, 22 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 60f332778e4..e802ebd88cb 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -173,6 +173,14 @@
 				fsl,cpm-command = <0xce00000>;
 			};
 
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				mode = "peripheral";
+			};
+
 			mdio@10d40 {
 				device_type = "mdio";
 				compatible = "fsl,mpc8272ads-mdio-bitbang",
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 67e2184f424..30394b409b3 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -99,6 +99,15 @@ static struct cpm_pin mpc8272_ads_pins[] = {
 	/* I2C */
 	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
 	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+
+	/* USB */
+	{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 };
 
 static void __init init_ioports(void)
@@ -112,6 +121,8 @@ static void __init init_ioports(void)
 
 	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
 	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX);
 	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
@@ -147,6 +158,7 @@ static void __init mpc8272_ads_setup_arch(void)
 #define BCSR1_FETH_RST		0x04000000
 #define BCSR1_RS232_EN1		0x02000000
 #define BCSR1_RS232_EN2		0x01000000
+#define BCSR3_USB_nEN		0x80000000
 #define BCSR3_FETHIEN2		0x10000000
 #define BCSR3_FETH2_RST		0x08000000
 
@@ -156,6 +168,8 @@ static void __init mpc8272_ads_setup_arch(void)
 	clrbits32(&bcsr[3], BCSR3_FETHIEN2);
 	setbits32(&bcsr[3], BCSR3_FETH2_RST);
 
+	clrbits32(&bcsr[3], BCSR3_USB_nEN);
+
 	iounmap(bcsr);
 
 	init_ioports();
-- 
cgit v1.2.3


From 9b9d401b8d11796f4c4bcbcabecfec9f5d85ea25 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:28:21 +0400
Subject: powerpc/85xx: Add QE USB support for MPC8569E-MDS boards

- Add gpio-controller node for BCSR17, it is used to control USB
  speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
      pilot boards if specs and schematics are correct, though we
      don't have the pilot boards to actually test it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8569mds.dts      | 45 +++++++++++++++++++++++++++++++
 arch/powerpc/platforms/85xx/mpc85xx_mds.c |  4 +++
 2 files changed, 49 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 9e4ce99e161..06332d61830 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -99,8 +99,18 @@
 		};
 
 		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,mpc8569mds-bcsr";
 			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr17: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569mds-bcsr-gpio";
+				reg = <0x11 0x1>;
+				gpio-controller;
+			};
 		};
 
 		nand@3,0 {
@@ -315,6 +325,14 @@
 				gpio-controller;
 			};
 
+			qe_pio_f: gpio-controller@a0 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0xa0 0x18>;
+				gpio-controller;
+			};
+
 			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
@@ -419,6 +437,16 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		timer@440 {
+			compatible = "fsl,mpc8569-qe-gtm",
+				     "fsl,qe-gtm", "fsl,gtm";
+			reg = <0x440 0x40>;
+			interrupts = <12 13 14 15>;
+			interrupt-parent = <&qeic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
 		spi@4c0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -446,6 +474,23 @@
 			mode = "cpu";
 		};
 
+		usb@6c0 {
+			compatible = "fsl,mpc8569-qe-usb",
+				     "fsl,mpc8323-qe-usb";
+			reg = <0x6c0 0x40 0x8b00 0x100>;
+			interrupts = <11>;
+			interrupt-parent = <&qeic>;
+			fsl,fullspeed-clock = "clk5";
+			fsl,lowspeed-clock = "brg10";
+			gpios = <&qe_pio_f 3 0   /* USBOE */
+				 &qe_pio_f 4 0   /* USBTP */
+				 &qe_pio_f 5 0   /* USBTN */
+				 &qe_pio_f 6 0   /* USBRP */
+				 &qe_pio_f 8 0   /* USBRN */
+				 &bcsr17   6 0   /* SPEED */
+				 &bcsr17   5 1>; /* POWER */
+		};
+
 		enet0: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index bfb32834ab0..20a61d0af33 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -47,6 +47,7 @@
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
@@ -304,6 +305,9 @@ static struct of_device_id mpc85xx_ids[] = {
 
 static int __init mpc85xx_publish_devices(void)
 {
+	if (machine_is(mpc8569_mds))
+		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
+
 	/* Publish the QE devices */
 	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
 
-- 
cgit v1.2.3


From 667000011927b4fcc359beac4a2447889db6d349 Mon Sep 17 00:00:00 2001
From: Josh Stone <jistone@redhat.com>
Date: Mon, 24 Aug 2009 14:43:11 -0700
Subject: tracing: Rename FTRACE_SYSCALLS for tracepoints

s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g
s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g

The syscall enter/exit tracing is no longer specific to just ftrace, so
they now have names that reflect their tie to tracepoints instead.

Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/s390/Kconfig                   |  2 +-
 arch/s390/defconfig                 |  2 +-
 arch/s390/include/asm/thread_info.h |  4 ++--
 arch/s390/kernel/entry.S            |  2 +-
 arch/s390/kernel/entry64.S          |  2 +-
 arch/s390/kernel/ptrace.c           |  4 ++--
 arch/x86/Kconfig                    |  2 +-
 arch/x86/configs/i386_defconfig     |  2 +-
 arch/x86/configs/x86_64_defconfig   |  2 +-
 arch/x86/include/asm/thread_info.h  | 13 +++++++------
 arch/x86/kernel/ptrace.c            |  4 ++--
 11 files changed, 20 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ae5d72f47e..7238ef4c7a6 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -84,7 +84,7 @@ config S390
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FTRACE_MCOUNT_RECORD
-	select HAVE_FTRACE_SYSCALLS
+	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_DEFAULT_NO_SPIN_MUTEXES
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index fcba206529f..4e91a2573cc 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -900,7 +900,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index ba1cab9fc1f..07eb61b2fb3 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -92,7 +92,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SYSCALL_TRACE	8	/* syscall trace active */
 #define TIF_SYSCALL_AUDIT	9	/* syscall auditing active */
 #define TIF_SECCOMP		10	/* secure computing */
-#define TIF_SYSCALL_FTRACE	11	/* ftrace syscall instrumentation */
+#define TIF_SYSCALL_TRACEPOINT	11	/* syscall tracepoint instrumentation */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
 					   TIF_NEED_RESCHED */
@@ -111,7 +111,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
-#define _TIF_SYSCALL_FTRACE	(1<<TIF_SYSCALL_FTRACE)
+#define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index c4c80a22bc1..5d40fce878a 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -54,7 +54,7 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
 _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
-		_TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
+		_TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8)
 
 STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
 STACK_SIZE  = 1 << STACK_SHIFT
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index f6618e9e15e..3ceb53c9c49 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -57,7 +57,7 @@ _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
 _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
-		_TIF_SECCOMP>>8 | _TIF_SYSCALL_FTRACE>>8)
+		_TIF_SECCOMP>>8 | _TIF_SYSCALL_TRACEPOINT>>8)
 
 #define BASED(name) name-system_call(%r13)
 
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index c5e87d891ca..9d3dcfa79ea 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -664,7 +664,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		ret = -1;
 	}
 
-	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_syscall_enter(regs, regs->gprs[2]);
 
 	if (unlikely(current->audit_context))
@@ -682,7 +682,7 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]),
 				   regs->gprs[2]);
 
-	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_syscall_exit(regs, regs->gprs[2]);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 738bdc6b0f8..d59cbf758f3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -37,7 +37,7 @@ config X86
 	select HAVE_FUNCTION_GRAPH_FP_TEST
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
-	select HAVE_FTRACE_SYSCALLS
+	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_KVM
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index edb992ebef9..d28fad19654 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -2355,7 +2355,7 @@ CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_HW_BRANCH_TRACER=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index cee1dd2e69b..6c86acd847a 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -2329,7 +2329,7 @@ CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_HW_BRANCH_TRACER=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index fad7d40b75f..6f7786aea4f 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -95,7 +95,7 @@ struct thread_info {
 #define TIF_DEBUGCTLMSR		25	/* uses thread_struct.debugctlmsr */
 #define TIF_DS_AREA_MSR		26      /* uses thread_struct.ds_area_msr */
 #define TIF_LAZY_MMU_UPDATES	27	/* task is updating the mmu lazily */
-#define TIF_SYSCALL_FTRACE	28	/* for ftrace syscall instrumentation */
+#define TIF_SYSCALL_TRACEPOINT	28	/* syscall tracepoint instrumentation */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
@@ -118,17 +118,17 @@ struct thread_info {
 #define _TIF_DEBUGCTLMSR	(1 << TIF_DEBUGCTLMSR)
 #define _TIF_DS_AREA_MSR	(1 << TIF_DS_AREA_MSR)
 #define _TIF_LAZY_MMU_UPDATES	(1 << TIF_LAZY_MMU_UPDATES)
-#define _TIF_SYSCALL_FTRACE	(1 << TIF_SYSCALL_FTRACE)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 
 /* work to do in syscall_trace_enter() */
 #define _TIF_WORK_SYSCALL_ENTRY	\
-	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_FTRACE |	\
-	 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | _TIF_SINGLESTEP)
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |	\
+	 _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do in syscall_trace_leave() */
 #define _TIF_WORK_SYSCALL_EXIT	\
 	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP |	\
-	 _TIF_SYSCALL_FTRACE)
+	 _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK							\
@@ -137,7 +137,8 @@ struct thread_info {
 	   _TIF_SINGLESTEP|_TIF_SECCOMP|_TIF_SYSCALL_EMU))
 
 /* work to do on any return to user space */
-#define _TIF_ALLWORK_MASK ((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_FTRACE)
+#define _TIF_ALLWORK_MASK						\
+	((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT)
 
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 34dd6f15185..a909afef44f 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1500,7 +1500,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs)
 	    tracehook_report_syscall_entry(regs))
 		ret = -1L;
 
-	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_syscall_enter(regs, regs->orig_ax);
 
 	if (unlikely(current->audit_context)) {
@@ -1526,7 +1526,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs)
 	if (unlikely(current->audit_context))
 		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
-	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_syscall_exit(regs, regs->ax);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-- 
cgit v1.2.3


From 97419875865859fd2403e66266c02ce028e2f5ab Mon Sep 17 00:00:00 2001
From: Josh Stone <jistone@redhat.com>
Date: Mon, 24 Aug 2009 14:43:13 -0700
Subject: tracing: Move tracepoint callbacks from declaration to definition

It's not strictly correct for the tracepoint reg/unreg callbacks to
occur when a client is hooking up, because the actual tracepoint may not
be present yet.  This happens to be fine for syscall, since that's in
the core kernel, but it would cause problems for tracepoints defined in
a module that hasn't been loaded yet.  It also means the reg/unreg has
to be EXPORTed for any modules to use the tracepoint (as in SystemTap).

This patch removes DECLARE_TRACE_WITH_CALLBACK, and instead introduces
DEFINE_TRACE_FN which stores the callbacks in struct tracepoint.  The
callbacks are used now when the active state of the tracepoint changes
in set_tracepoint & disable_tracepoint.

This also introduces TRACE_EVENT_FN, so ftrace events can also provide
registration callbacks if needed.

Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-4-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/s390/kernel/ptrace.c | 4 ++--
 arch/x86/kernel/ptrace.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 9d3dcfa79ea..c05b44b80c2 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -51,8 +51,8 @@
 #include "compat_ptrace.h"
 #endif
 
-DEFINE_TRACE(syscall_enter);
-DEFINE_TRACE(syscall_exit);
+DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc);
+DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc);
 
 enum s390_regset {
 	REGSET_GENERAL,
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index a909afef44f..31e9b97ec4d 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -37,8 +37,8 @@
 
 #include <trace/syscall.h>
 
-DEFINE_TRACE(syscall_enter);
-DEFINE_TRACE(syscall_exit);
+DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc);
+DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc);
 
 #include "tls.h"
 
-- 
cgit v1.2.3


From 1c569f0264ea629c10bbab471dd0626ce4d3f19f Mon Sep 17 00:00:00 2001
From: Josh Stone <jistone@redhat.com>
Date: Mon, 24 Aug 2009 14:43:14 -0700
Subject: tracing: Create generic syscall TRACE_EVENTs

This converts the syscall_enter/exit tracepoints into TRACE_EVENTs, so
you can have generic ftrace events that capture all system calls with
arguments and return values.  These generic events are also renamed to
sys_enter/exit, so they're more closely aligned to the specific
sys_enter_foo events.

Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-5-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/s390/kernel/ptrace.c |  8 ++++----
 arch/x86/kernel/ptrace.c  | 12 +++++-------
 2 files changed, 9 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index c05b44b80c2..f3ddd7ac06c 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -51,8 +51,8 @@
 #include "compat_ptrace.h"
 #endif
 
-DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc);
-DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc);
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
 
 enum s390_regset {
 	REGSET_GENERAL,
@@ -665,7 +665,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 	}
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_syscall_enter(regs, regs->gprs[2]);
+		trace_sys_enter(regs, regs->gprs[2]);
 
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(is_compat_task() ?
@@ -683,7 +683,7 @@ asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
 				   regs->gprs[2]);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_syscall_exit(regs, regs->gprs[2]);
+		trace_sys_exit(regs, regs->gprs[2]);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 31e9b97ec4d..8d7d5c9c1be 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -35,13 +35,11 @@
 #include <asm/proto.h>
 #include <asm/ds.h>
 
-#include <trace/syscall.h>
-
-DEFINE_TRACE_FN(syscall_enter, syscall_regfunc, syscall_unregfunc);
-DEFINE_TRACE_FN(syscall_exit, syscall_regfunc, syscall_unregfunc);
-
 #include "tls.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 enum x86_regset {
 	REGSET_GENERAL,
 	REGSET_FP,
@@ -1501,7 +1499,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs)
 		ret = -1L;
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_syscall_enter(regs, regs->orig_ax);
+		trace_sys_enter(regs, regs->orig_ax);
 
 	if (unlikely(current->audit_context)) {
 		if (IS_IA32)
@@ -1527,7 +1525,7 @@ asmregparm void syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_syscall_exit(regs, regs->ax);
+		trace_sys_exit(regs, regs->ax);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
-- 
cgit v1.2.3


From ab94fcf528d127fcb490175512a8910f37e5b346 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 25 Aug 2009 16:47:16 -0700
Subject: x86: allow "=rm" in native_save_fl()

This is a partial revert of f1f029c7bfbf4ee1918b90a431ab823bed812504.

"=rm" is allowed in this context, because "pop" is explicitly defined
to adjust the stack pointer *before* it evaluates its effective
address, if it has one.  Thus, we do end up writing to the correct
address even if we use an on-stack memory argument.

The original reporter for f1f029c7bfbf4ee1918b90a431ab823bed812504 was
apparently using a broken x86 simulator.

[ Impact: performance ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Gabe Black <spamforgabe@umich.edu>
---
 arch/x86/include/asm/irqflags.h | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index c6ccbe7e81a..9e2b952f810 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -13,14 +13,13 @@ static inline unsigned long native_save_fl(void)
 	unsigned long flags;
 
 	/*
-	 * Note: this needs to be "=r" not "=rm", because we have the
-	 * stack offset from what gcc expects at the time the "pop" is
-	 * executed, and so a memory reference with respect to the stack
-	 * would end up using the wrong address.
+	 * "=rm" is safe here, because "pop" adjusts the stack before
+	 * it evaluates its effective address -- this is part of the
+	 * documented behavior of the "pop" instruction.
 	 */
 	asm volatile("# __raw_save_flags\n\t"
 		     "pushf ; pop %0"
-		     : "=r" (flags)
+		     : "=rm" (flags)
 		     : /* no input */
 		     : "memory");
 
-- 
cgit v1.2.3


From d8ed1d43e17898761c7221014a15a4c7501d2ff3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 25 Aug 2009 16:47:46 -0700
Subject: sparc64: Validate linear D-TLB misses.

When page alloc debugging is not enabled, we essentially accept any
virtual address for linear kernel TLB misses.  But with kgdb, kernel
address probing, and other facilities we can try to access arbitrary
crap.

So, make sure the address we miss on will translate to physical memory
that actually exists.

In order to make this work we have to embed the valid address bitmap
into the kernel image.  And in order to make that less expensive we
make an adjustment, in that the max physical memory address is
decreased to "1 << 41", even on the chips that support a 42-bit
physical address space.  We can do this because bit 41 indicates
"I/O space" and thus covers non-memory ranges.

The result of this is that:

1) kpte_linear_bitmap shrinks from 2K to 1K in size

2) we need 64K more for the valid address bitmap

We can't let the valid address bitmap be dynamically allocated
once we start using it to validate TLB misses, otherwise we have
crazy issues to deal with wrt. recursive TLB misses and such.

If we're in a TLB miss it could be the deepest trap level that's legal
inside of the cpu.  So if we TLB miss referencing the bitmap, the cpu
will be out of trap levels and enter RED state.

To guard against out-of-range accesses to the bitmap, we have to check
to make sure no bits in the physical address above bit 40 are set.  We
could export and use last_valid_pfn for this check, but that's just an
unnecessary extra memory reference.

On the plus side of all this, since we load all of these translations
into the special 4MB mapping TSB, and we check the TSB first for TLB
misses, there should be absolutely no real cost for these new checks
in the TLB miss path.

Reported-by: heyongli@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/pgtable_64.h | 12 ++++++++---
 arch/sparc/kernel/ktlb.S            | 42 ++++++++++++++++++++++++++++++++----
 arch/sparc/mm/init_64.c             | 43 +++++++++++++++++++++----------------
 arch/sparc/mm/init_64.h             |  7 ++++--
 4 files changed, 76 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index b049abf9902..0ff92fa2206 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -726,11 +726,17 @@ extern unsigned long pte_file(pte_t);
 extern pte_t pgoff_to_pte(unsigned long);
 #define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
 
-extern unsigned long *sparc64_valid_addr_bitmap;
+extern unsigned long sparc64_valid_addr_bitmap[];
 
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr)	\
-	(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+static inline bool kern_addr_valid(unsigned long addr)
+{
+	unsigned long paddr = __pa(addr);
+
+	if ((paddr >> 41UL) != 0UL)
+		return false;
+	return test_bit(paddr >> 22, sparc64_valid_addr_bitmap);
+}
 
 extern int page_in_phys_avail(unsigned long paddr);
 
diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S
index cef8defcd7a..3ea6e8cde8c 100644
--- a/arch/sparc/kernel/ktlb.S
+++ b/arch/sparc/kernel/ktlb.S
@@ -151,12 +151,46 @@ kvmap_dtlb_4v:
 	 * Must preserve %g1 and %g6 (TAG).
 	 */
 kvmap_dtlb_tsb4m_miss:
-	sethi		%hi(kpte_linear_bitmap), %g2
-	or		%g2, %lo(kpte_linear_bitmap), %g2
+	/* Clear the PAGE_OFFSET top virtual bits, shift
+	 * down to get PFN, and make sure PFN is in range.
+	 */
+	sllx		%g4, 21, %g5
 
-	/* Clear the PAGE_OFFSET top virtual bits, then shift
-	 * down to get a 256MB physical address index.
+	/* Check to see if we know about valid memory at the 4MB
+	 * chunk this physical address will reside within.
 	 */
+	srlx		%g5, 21 + 41, %g2
+	brnz,pn		%g2, kvmap_dtlb_longpath
+	 nop
+
+	/* This unconditional branch and delay-slot nop gets patched
+	 * by the sethi sequence once the bitmap is properly setup.
+	 */
+	.globl		valid_addr_bitmap_insn
+valid_addr_bitmap_insn:
+	ba,pt		%xcc, 2f
+	 nop
+	.subsection	2
+	.globl		valid_addr_bitmap_patch
+valid_addr_bitmap_patch:
+	sethi		%hi(sparc64_valid_addr_bitmap), %g7
+	or		%g7, %lo(sparc64_valid_addr_bitmap), %g7
+	.previous
+
+	srlx		%g5, 21 + 22, %g2
+	srlx		%g2, 6, %g5
+	and		%g2, 63, %g2
+	sllx		%g5, 3, %g5
+	ldx		[%g7 + %g5], %g5
+	mov		1, %g7
+	sllx		%g7, %g2, %g7
+	andcc		%g5, %g7, %g0
+	be,pn		%xcc, kvmap_dtlb_longpath
+
+2:	 sethi		%hi(kpte_linear_bitmap), %g2
+	or		%g2, %lo(kpte_linear_bitmap), %g2
+
+	/* Get the 256MB physical address index. */
 	sllx		%g4, 21, %g5
 	mov		1, %g7
 	srlx		%g5, 21 + 28, %g5
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index ed6be6ba2f4..a70a5e1904d 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -145,7 +145,8 @@ static void __init read_obp_memory(const char *property,
 	     cmp_p64, NULL);
 }
 
-unsigned long *sparc64_valid_addr_bitmap __read_mostly;
+unsigned long sparc64_valid_addr_bitmap[VALID_ADDR_BITMAP_BYTES /
+					sizeof(unsigned long)];
 EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
 
 /* Kernel physical address base and size in bytes.  */
@@ -1874,7 +1875,7 @@ static int pavail_rescan_ents __initdata;
  * memory list again, and make sure it provides at least as much
  * memory as 'pavail' does.
  */
-static void __init setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(unsigned long *bitmap)
 {
 	int i;
 
@@ -1897,8 +1898,7 @@ static void __init setup_valid_addr_bitmap_from_pavail(void)
 
 				if (new_start <= old_start &&
 				    new_end >= (old_start + PAGE_SIZE)) {
-					set_bit(old_start >> 22,
-						sparc64_valid_addr_bitmap);
+					set_bit(old_start >> 22, bitmap);
 					goto do_next_page;
 				}
 			}
@@ -1919,20 +1919,21 @@ static void __init setup_valid_addr_bitmap_from_pavail(void)
 	}
 }
 
+static void __init patch_tlb_miss_handler_bitmap(void)
+{
+	extern unsigned int valid_addr_bitmap_insn[];
+	extern unsigned int valid_addr_bitmap_patch[];
+
+	valid_addr_bitmap_insn[1] = valid_addr_bitmap_patch[1];
+	mb();
+	valid_addr_bitmap_insn[0] = valid_addr_bitmap_patch[0];
+	flushi(&valid_addr_bitmap_insn[0]);
+}
+
 void __init mem_init(void)
 {
 	unsigned long codepages, datapages, initpages;
 	unsigned long addr, last;
-	int i;
-
-	i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6);
-	i += 1;
-	sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3);
-	if (sparc64_valid_addr_bitmap == NULL) {
-		prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n");
-		prom_halt();
-	}
-	memset(sparc64_valid_addr_bitmap, 0, i << 3);
 
 	addr = PAGE_OFFSET + kern_base;
 	last = PAGE_ALIGN(kern_size) + addr;
@@ -1941,15 +1942,19 @@ void __init mem_init(void)
 		addr += PAGE_SIZE;
 	}
 
-	setup_valid_addr_bitmap_from_pavail();
+	setup_valid_addr_bitmap_from_pavail(sparc64_valid_addr_bitmap);
+	patch_tlb_miss_handler_bitmap();
 
 	high_memory = __va(last_valid_pfn << PAGE_SHIFT);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-	for_each_online_node(i) {
-		if (NODE_DATA(i)->node_spanned_pages != 0) {
-			totalram_pages +=
-				free_all_bootmem_node(NODE_DATA(i));
+	{
+		int i;
+		for_each_online_node(i) {
+			if (NODE_DATA(i)->node_spanned_pages != 0) {
+				totalram_pages +=
+					free_all_bootmem_node(NODE_DATA(i));
+			}
 		}
 	}
 #else
diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h
index 16063870a48..c2f772dbd55 100644
--- a/arch/sparc/mm/init_64.h
+++ b/arch/sparc/mm/init_64.h
@@ -5,10 +5,13 @@
  * marked non-static so that assembler code can get at them.
  */
 
-#define MAX_PHYS_ADDRESS	(1UL << 42UL)
-#define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
+#define MAX_PHYS_ADDRESS	(1UL << 41UL)
+#define KPTE_BITMAP_CHUNK_SZ		(256UL * 1024UL * 1024UL)
 #define KPTE_BITMAP_BYTES	\
 	((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8)
+#define VALID_ADDR_BITMAP_CHUNK_SZ	(4UL * 1024UL * 1024UL)
+#define VALID_ADDR_BITMAP_BYTES	\
+	((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8)
 
 extern unsigned long kern_linear_pte_xor[2];
 extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
-- 
cgit v1.2.3


From 1dcd8ffc81e80a170625883f63f6a5db3cd0428d Mon Sep 17 00:00:00 2001
From: Michael Barkowski <michaelbarkowski@ruggedcom.com>
Date: Tue, 18 Aug 2009 17:20:44 -0400
Subject: powerpc/qe_lib: Set gpio data before changing the direction to output

This avoids having a short glitch if the desired initial value is not
the same as what was previously in the data register.

Signed-off-by: Michael Barkowski <michaelbarkowski@ruggedcom.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/qe_lib/gpio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 3485288dce3..8e7a7767dd5 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -105,14 +105,14 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
 	unsigned long flags;
 
+	qe_gpio_set(gc, gpio, val);
+
 	spin_lock_irqsave(&qe_gc->lock, flags);
 
 	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
 
 	spin_unlock_irqrestore(&qe_gc->lock, flags);
 
-	qe_gpio_set(gc, gpio, val);
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From d560bc61575efae43595cbcb56d0ba3b9450139c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Tue, 25 Aug 2009 12:53:02 -0700
Subject: x86, xen: Suppress WP test on Xen

Xen always runs on CPUs which properly support WP enforcement in
privileged mode, so there's no need to test for it.

This also works around a crash reported by Arnd Hannemann, though I
think its just a band-aid for that case.

Reported-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/xen/enlighten.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e90540a46a0..0b755cd7686 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1059,6 +1059,7 @@ asmlinkage void __init xen_start_kernel(void)
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
 	new_cpu_data.hard_math = 1;
+	new_cpu_data.wp_works_ok = 1;
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
 #endif
 
-- 
cgit v1.2.3


From 7adb4df410966dfe43e4815256e3215110648fb8 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 25 Aug 2009 21:06:03 -0700
Subject: x86, xen: Initialize cx to suppress warning

Initialize cx before calling xen_cpuid(), in order to suppress the
"may be used uninitialized in this function" warning.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/xen/enlighten.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0b755cd7686..eb33aaa8415 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -215,6 +215,7 @@ static __init void xen_init_cpuid_mask(void)
 			  (1 << X86_FEATURE_ACPI));  /* disable ACPI */
 
 	ax = 1;
+	cx = 0;
 	xen_cpuid(&ax, &bx, &cx, &dx);
 
 	/* cpuid claims we support xsave; try enabling it to see what happens */
-- 
cgit v1.2.3


From 8f3e1df48baf728bbb0f242c9dff9c9d7108218a Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Mon, 24 Aug 2009 21:53:36 +0400
Subject: x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant

We already have APIC_DEFAULT_PHYS_BASE so just to be
consistent.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090824175550.927946757@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apicdef.h |  3 ++-
 arch/x86/kernel/mpparse.c      | 10 +++++-----
 2 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 7ddb36ab933..7386bfa4f4b 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -8,7 +8,8 @@
  * Ingo Molnar <mingo@redhat.com>, 1999, 2000
  */
 
-#define	APIC_DEFAULT_PHYS_BASE	0xfee00000
+#define IO_APIC_DEFAULT_PHYS_BASE	0xfec00000
+#define	APIC_DEFAULT_PHYS_BASE		0xfee00000
 
 #define	APIC_ID		0x20
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 651c93b2886..fcd513bf284 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -482,11 +482,11 @@ static void __init construct_ioapic_table(int mpc_default_type)
 		MP_bus_info(&bus);
 	}
 
-	ioapic.type = MP_IOAPIC;
-	ioapic.apicid = 2;
-	ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
-	ioapic.flags = MPC_APIC_USABLE;
-	ioapic.apicaddr = 0xFEC00000;
+	ioapic.type	= MP_IOAPIC;
+	ioapic.apicid	= 2;
+	ioapic.apicver	= mpc_default_type > 4 ? 0x10 : 0x01;
+	ioapic.flags	= MPC_APIC_USABLE;
+	ioapic.apicaddr	= IO_APIC_DEFAULT_PHYS_BASE;
 	MP_ioapic_info(&ioapic);
 
 	/*
-- 
cgit v1.2.3


From ffc438366c2660a6a811b94ba33229bf217f8254 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Mon, 24 Aug 2009 21:53:39 +0400
Subject: x86, ioapic: Get rid of needless check and simplify
 ioapic_setup_resources()

alloc_bootmem() already panics on allocation failure. There is
no need to check the result.

Also there is a way to unbind global variable from its body and
use it as a parameter which allow us to simplify
ioapic_init_mappings as well -- "for" cycle already uses
nr_ioapics as a conditional variable and there is no need to
check if ioapic_setup_resources was returning NULL again.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090824175551.493629148@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2999f3dd588..d836b4d347e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -4053,7 +4053,7 @@ void __init setup_ioapic_dest(void)
 
 static struct resource *ioapic_resources;
 
-static struct resource * __init ioapic_setup_resources(void)
+static struct resource * __init ioapic_setup_resources(int nr_ioapics)
 {
 	unsigned long n;
 	struct resource *res;
@@ -4069,15 +4069,13 @@ static struct resource * __init ioapic_setup_resources(void)
 	mem = alloc_bootmem(n);
 	res = (void *)mem;
 
-	if (mem != NULL) {
-		mem += sizeof(struct resource) * nr_ioapics;
+	mem += sizeof(struct resource) * nr_ioapics;
 
-		for (i = 0; i < nr_ioapics; i++) {
-			res[i].name = mem;
-			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-			sprintf(mem,  "IOAPIC %u", i);
-			mem += IOAPIC_RESOURCE_NAME_SIZE;
-		}
+	for (i = 0; i < nr_ioapics; i++) {
+		res[i].name = mem;
+		res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		sprintf(mem,  "IOAPIC %u", i);
+		mem += IOAPIC_RESOURCE_NAME_SIZE;
 	}
 
 	ioapic_resources = res;
@@ -4091,7 +4089,7 @@ void __init ioapic_init_mappings(void)
 	struct resource *ioapic_res;
 	int i;
 
-	ioapic_res = ioapic_setup_resources();
+	ioapic_res = ioapic_setup_resources(nr_ioapics);
 	for (i = 0; i < nr_ioapics; i++) {
 		if (smp_found_config) {
 			ioapic_phys = mp_ioapics[i].apicaddr;
@@ -4120,11 +4118,9 @@ fake_ioapic_page:
 			    __fix_to_virt(idx), ioapic_phys);
 		idx++;
 
-		if (ioapic_res != NULL) {
-			ioapic_res->start = ioapic_phys;
-			ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
-			ioapic_res++;
-		}
+		ioapic_res->start = ioapic_phys;
+		ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+		ioapic_res++;
 	}
 }
 
-- 
cgit v1.2.3


From 5051fd69773d2d044734b78516317a04d3774871 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Mon, 24 Aug 2009 21:53:37 +0400
Subject: x86, e820: Guard against array overflowed in __e820_add_region()

Better to be paranoid against unpredicted nr_map modifications.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090824175551.146070377@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/e820.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa33d79..2e5e0faa99b 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -115,7 +115,7 @@ static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
 {
 	int x = e820x->nr_map;
 
-	if (x == ARRAY_SIZE(e820x->map)) {
+	if (x >= ARRAY_SIZE(e820x->map)) {
 		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
 		return;
 	}
-- 
cgit v1.2.3


From 60902a2cb12c3c1682ee7a04ad7448ec16dc0c29 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 21 May 2009 07:41:35 -0400
Subject: davinci: EDMA: multiple CCs, channel mapping and API changes

- restructure to support multiple channel controllers by using
  additional struct resources for each CC

- interface changes visible to EDMA clients

  Introduce macros to build IDs from controller and channel number,
  and to extract them. Modify the edma_alloc_slot function to take an
  extra argument for the controller.

  Also update ASoC drivers to use API.  ASoC changes
  Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

- Move queue related mappings to dm<soc>.c

  EDMA in DM355 and DM644x has two transfer controllers while DM646x
  has four transfer controllers. Moving the queue to tc mapping and
  queue priority mapping to dm<soc>.c will be helpful to probe these
  mappings from platform device so that the machine_is_* testing will
  be avoided.

- add channel mapping logic

  Channel mapping logic is introduced in dm646x EDMA. This implies
  that there is no fixed association for a channel number to a
  parameter entry number. In other words, using the DMA channel
  mapping registers (DCHMAPn), a PaRAM entry can be mapped to any
  channel. While in the case of dm644x and dm355 there is a fixed
  mapping between the EDMA channel and Param entry number.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Reviewed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices.c           |   8 +-
 arch/arm/mach-davinci/dm355.c             |  41 +-
 arch/arm/mach-davinci/dm644x.c            |  41 +-
 arch/arm/mach-davinci/dm646x.c            |  46 +-
 arch/arm/mach-davinci/dma.c               | 811 +++++++++++++++++++-----------
 arch/arm/mach-davinci/include/mach/edma.h |   9 +-
 6 files changed, 635 insertions(+), 321 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index de16f347566..7a2f8ae89be 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -82,10 +82,10 @@ static struct resource mmcsd0_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = DAVINCI_DMA_MMCRXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = DAVINCI_DMA_MMCTXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -119,10 +119,10 @@ static struct resource mmcsd1_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = 30,	/* rx */
+		.start = EDMA_CTLR_CHAN(0, 30),	/* rx */
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = 31,	/* tx */
+		.start = EDMA_CTLR_CHAN(0, 31),	/* tx */
 		.flags = IORESOURCE_DMA,
 	},
 };
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index baaaf328de2..373f0c4003a 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -558,17 +558,38 @@ static const s8 dma_chan_dm355_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm355_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm355_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm355_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm355_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -586,10 +607,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -598,8 +621,8 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm355_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm355_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm355_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index fb5449b3c97..d145c0cbfe6 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -484,17 +484,38 @@ static const s8 dma_chan_dm644x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm644x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 4,
-	.n_slot		= 128,
-	.n_tc		= 2,
-	.noevent	= dma_chan_dm644x_no_event,
+static const s8
+queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1},
+};
+
+static const s8
+queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm644x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm644x_no_event,
+		.queue_tc_mapping	= queue_tc_mapping,
+		.queue_priority_mapping	= queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -512,10 +533,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -524,8 +547,8 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm644x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm644x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm644x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 334f0711e0f..e2410738327 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -451,17 +451,43 @@ static const s8 dma_chan_dm646x_no_event[] = {
 	-1
 };
 
-static struct edma_soc_info dm646x_edma_info = {
-	.n_channel	= 64,
-	.n_region	= 6,	/* 0-1, 4-7 */
-	.n_slot		= 512,
-	.n_tc		= 4,
-	.noevent	= dma_chan_dm646x_no_event,
+/* Four Transfer Controllers on DM646x */
+static const s8
+dm646x_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm646x_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 4},
+	{1, 0},
+	{2, 5},
+	{3, 1},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm646x_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 6,	/* 0-1, 4-7 */
+		.n_slot			= 512,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.noevent		= dma_chan_dm646x_no_event,
+		.queue_tc_mapping	= dm646x_queue_tc_mapping,
+		.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	},
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc",
+		.name	= "edma_cc0",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
@@ -491,10 +517,12 @@ static struct resource edma_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{
+		.name	= "edma0",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
+		.name	= "edma0_err",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -503,8 +531,8 @@ static struct resource edma_resources[] = {
 
 static struct platform_device dm646x_edma_device = {
 	.name			= "edma",
-	.id			= -1,
-	.dev.platform_data	= &dm646x_edma_info,
+	.id			= 0,
+	.dev.platform_data	= dm646x_edma_info,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 15e9eb158bb..5908f7717b2 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -100,132 +100,157 @@
 #define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
 #define EDMA_PARM	0x4000	/* 128 param entries */
 
-#define DAVINCI_DMA_3PCC_BASE	0x01C00000
-
 #define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
 
+#define EDMA_DCHMAP	0x0100  /* 64 registers */
+#define CHMAP_EXIST	BIT(24)
+
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
-#define EDMA_MAX_EVQUE            2	/* FIXME too small */
+#define EDMA_MAX_CC               2
 
 
 /*****************************************************************************/
 
-static void __iomem *edmacc_regs_base;
+static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
 
-static inline unsigned int edma_read(int offset)
+static inline unsigned int edma_read(unsigned ctlr, int offset)
 {
-	return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
 }
 
-static inline void edma_write(int offset, int val)
+static inline void edma_write(unsigned ctlr, int offset, int val)
 {
-	__raw_writel(val, edmacc_regs_base + offset);
+	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
 }
-static inline void edma_modify(int offset, unsigned and, unsigned or)
+static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
+		unsigned or)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val &= and;
 	val |= or;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline void edma_and(int offset, unsigned and)
+static inline void edma_and(unsigned ctlr, int offset, unsigned and)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val &= and;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline void edma_or(int offset, unsigned or)
+static inline void edma_or(unsigned ctlr, int offset, unsigned or)
 {
-	unsigned val = edma_read(offset);
+	unsigned val = edma_read(ctlr, offset);
 	val |= or;
-	edma_write(offset, val);
+	edma_write(ctlr, offset, val);
 }
-static inline unsigned int edma_read_array(int offset, int i)
+static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
 {
-	return edma_read(offset + (i << 2));
+	return edma_read(ctlr, offset + (i << 2));
 }
-static inline void edma_write_array(int offset, int i, unsigned val)
+static inline void edma_write_array(unsigned ctlr, int offset, int i,
+		unsigned val)
 {
-	edma_write(offset + (i << 2), val);
+	edma_write(ctlr, offset + (i << 2), val);
 }
-static inline void edma_modify_array(int offset, int i,
+static inline void edma_modify_array(unsigned ctlr, int offset, int i,
 		unsigned and, unsigned or)
 {
-	edma_modify(offset + (i << 2), and, or);
+	edma_modify(ctlr, offset + (i << 2), and, or);
 }
-static inline void edma_or_array(int offset, int i, unsigned or)
+static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
 {
-	edma_or(offset + (i << 2), or);
+	edma_or(ctlr, offset + (i << 2), or);
 }
-static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
+		unsigned or)
 {
-	edma_or(offset + ((i*2 + j) << 2), or);
+	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
 }
-static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
+		unsigned val)
 {
-	edma_write(offset + ((i*2 + j) << 2), val);
+	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
 }
-static inline unsigned int edma_shadow0_read(int offset)
+static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
 {
-	return edma_read(EDMA_SHADOW0 + offset);
+	return edma_read(ctlr, EDMA_SHADOW0 + offset);
 }
-static inline unsigned int edma_shadow0_read_array(int offset, int i)
+static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
+		int i)
 {
-	return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
 }
-static inline void edma_shadow0_write(int offset, unsigned val)
+static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
 {
-	edma_write(EDMA_SHADOW0 + offset, val);
+	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
 }
-static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
+		unsigned val)
 {
-	edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
 }
-static inline unsigned int edma_parm_read(int offset, int param_no)
+static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
+		int param_no)
 {
-	return edma_read(EDMA_PARM + offset + (param_no << 5));
+	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
 }
-static inline void edma_parm_write(int offset, int param_no, unsigned val)
+static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
+		unsigned val)
 {
-	edma_write(EDMA_PARM + offset + (param_no << 5), val);
+	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
 }
-static inline void edma_parm_modify(int offset, int param_no,
+static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
 		unsigned and, unsigned or)
 {
-	edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
 }
-static inline void edma_parm_and(int offset, int param_no, unsigned and)
+static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
+		unsigned and)
 {
-	edma_and(EDMA_PARM + offset + (param_no << 5), and);
+	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
 }
-static inline void edma_parm_or(int offset, int param_no, unsigned or)
+static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
+		unsigned or)
 {
-	edma_or(EDMA_PARM + offset + (param_no << 5), or);
+	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
 }
 
 /*****************************************************************************/
 
 /* actual number of DMA channels and slots on this silicon */
-static unsigned num_channels;
-static unsigned num_slots;
+struct edma {
+	/* how many dma resources of each type */
+	unsigned	num_channels;
+	unsigned	num_region;
+	unsigned	num_slots;
+	unsigned	num_tc;
+	unsigned	num_cc;
+
+	/* list of channels with no even trigger; terminated by "-1" */
+	const s8	*noevent;
+
+	/* The edma_inuse bit for each PaRAM slot is clear unless the
+	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+	 */
+	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
 
-static struct dma_interrupt_data {
-	void (*callback)(unsigned channel, unsigned short ch_status,
-			 void *data);
-	void *data;
-} intr_data[EDMA_MAX_DMACH];
+	/* The edma_noevent bit for each channel is clear unless
+	 * it doesn't trigger DMA events on this platform.  It uses a
+	 * bit of SOC-specific initialization code.
+	 */
+	DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
 
-/* The edma_inuse bit for each PaRAM slot is clear unless the
- * channel is in use ... by ARM or DSP, for QDMA, or whatever.
- */
-static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+	unsigned	irq_res_start;
+	unsigned	irq_res_end;
 
-/* The edma_noevent bit for each channel is clear unless
- * it doesn't trigger DMA events on this platform.  It uses a
- * bit of SOC-specific initialization code.
- */
-static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+	struct dma_interrupt_data {
+		void (*callback)(unsigned channel, unsigned short ch_status,
+				void *data);
+		void *data;
+	} intr_data[EDMA_MAX_DMACH];
+};
+
+static struct edma *edma_info[EDMA_MAX_CC];
 
 /* dummy param set used to (re)initialize parameter RAM slots */
 static const struct edmacc_param dummy_paramset = {
@@ -233,25 +258,10 @@ static const struct edmacc_param dummy_paramset = {
 	.ccnt = 1,
 };
 
-static const int __initconst
-queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
-/* {event queue no, TC no} */
-	{0, 0},
-	{1, 1},
-	{-1, -1}
-};
-
-static const int __initconst
-queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1}
-};
-
 /*****************************************************************************/
 
-static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
+		enum dma_event_q queue_no)
 {
 	int bit = (ch_no & 0x7) * 4;
 
@@ -260,20 +270,40 @@ static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
 		queue_no = EVENTQ_1;
 
 	queue_no &= 7;
-	edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
 			~(0x7 << bit), queue_no << bit);
 }
 
-static void __init map_queue_tc(int queue_no, int tc_no)
+static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no)
 {
 	int bit = queue_no * 4;
-	edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+	edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
 }
 
-static void __init assign_priority_to_queue(int queue_no, int priority)
+static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
+		int priority)
 {
 	int bit = queue_no * 4;
-	edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
+			((priority & 0x7) << bit));
+}
+
+/**
+ * map_dmach_param - Maps channel number to param entry number
+ *
+ * This maps the dma channel number to param entry numberter. In
+ * other words using the DMA channel mapping registers a param entry
+ * can be mapped to any channel
+ *
+ * Callers are responsible for ensuring the channel mapping logic is
+ * included in that particular EDMA variant (Eg : dm646x)
+ *
+ */
+static void __init map_dmach_param(unsigned ctlr)
+{
+	int i;
+	for (i = 0; i < EDMA_MAX_DMACH; i++)
+		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
 }
 
 static inline void
@@ -281,22 +311,39 @@ setup_dma_interrupt(unsigned lch,
 	void (*callback)(unsigned channel, u16 ch_status, void *data),
 	void *data)
 {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(lch);
+	lch = EDMA_CHAN_SLOT(lch);
+
 	if (!callback) {
-		edma_shadow0_write_array(SH_IECR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
 				(1 << (lch & 0x1f)));
 	}
 
-	intr_data[lch].callback = callback;
-	intr_data[lch].data = data;
+	edma_info[ctlr]->intr_data[lch].callback = callback;
+	edma_info[ctlr]->intr_data[lch].data = data;
 
 	if (callback) {
-		edma_shadow0_write_array(SH_ICR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
 				(1 << (lch & 0x1f)));
-		edma_shadow0_write_array(SH_IESR, lch >> 5,
+		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
 				(1 << (lch & 0x1f)));
 	}
 }
 
+static int irq2ctlr(int irq)
+{
+	if (irq >= edma_info[0]->irq_res_start &&
+		irq <= edma_info[0]->irq_res_end)
+		return 0;
+	else if (irq >= edma_info[1]->irq_res_start &&
+		irq <= edma_info[1]->irq_res_end)
+		return 1;
+
+	return -1;
+}
+
 /******************************************************************************
  *
  * DMA interrupt handler
@@ -305,32 +352,39 @@ setup_dma_interrupt(unsigned lch,
 static irqreturn_t dma_irq_handler(int irq, void *data)
 {
 	int i;
+	unsigned ctlr;
 	unsigned int cnt = 0;
 
+	ctlr = irq2ctlr(irq);
+
 	dev_dbg(data, "dma_irq_handler\n");
 
-	if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
-	    && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0)
+	    && (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j;
-		if (edma_shadow0_read_array(SH_IPR, 0))
+		if (edma_shadow0_read_array(ctlr, SH_IPR, 0))
 			j = 0;
-		else if (edma_shadow0_read_array(SH_IPR, 1))
+		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1))
 			j = 1;
 		else
 			break;
 		dev_dbg(data, "IPR%d %08x\n", j,
-				edma_shadow0_read_array(SH_IPR, j));
+				edma_shadow0_read_array(ctlr, SH_IPR, j));
 		for (i = 0; i < 32; i++) {
 			int k = (j << 5) + i;
-			if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+			if (edma_shadow0_read_array(ctlr, SH_IPR, j) &
+							(1 << i)) {
 				/* Clear the corresponding IPR bits */
-				edma_shadow0_write_array(SH_ICR, j, (1 << i));
-				if (intr_data[k].callback) {
-					intr_data[k].callback(k, DMA_COMPLETE,
-						intr_data[k].data);
+				edma_shadow0_write_array(ctlr, SH_ICR, j,
+							(1 << i));
+				if (edma_info[ctlr]->intr_data[k].callback) {
+					edma_info[ctlr]->intr_data[k].callback(
+						k, DMA_COMPLETE,
+						edma_info[ctlr]->intr_data[k].
+						data);
 				}
 			}
 		}
@@ -338,7 +392,7 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 		if (cnt > 10)
 			break;
 	}
-	edma_shadow0_write(SH_IEVAL, 1);
+	edma_shadow0_write(ctlr, SH_IEVAL, 1);
 	return IRQ_HANDLED;
 }
 
@@ -350,78 +404,87 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 static irqreturn_t dma_ccerr_handler(int irq, void *data)
 {
 	int i;
+	unsigned ctlr;
 	unsigned int cnt = 0;
 
+	ctlr = irq2ctlr(irq);
+
 	dev_dbg(data, "dma_ccerr_handler\n");
 
-	if ((edma_read_array(EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(EDMA_EMR, 1) == 0) &&
-	    (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
+	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
+	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
+	    (edma_read(ctlr, EDMA_CCERR) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j = -1;
-		if (edma_read_array(EDMA_EMR, 0))
+		if (edma_read_array(ctlr, EDMA_EMR, 0))
 			j = 0;
-		else if (edma_read_array(EDMA_EMR, 1))
+		else if (edma_read_array(ctlr, EDMA_EMR, 1))
 			j = 1;
 		if (j >= 0) {
 			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(EDMA_EMR, j));
+					edma_read_array(ctlr, EDMA_EMR, j));
 			for (i = 0; i < 32; i++) {
 				int k = (j << 5) + i;
-				if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+				if (edma_read_array(ctlr, EDMA_EMR, j) &
+							(1 << i)) {
 					/* Clear the corresponding EMR bits */
-					edma_write_array(EDMA_EMCR, j, 1 << i);
+					edma_write_array(ctlr, EDMA_EMCR, j,
+							1 << i);
 					/* Clear any SER */
-					edma_shadow0_write_array(SH_SECR, j,
-							(1 << i));
-					if (intr_data[k].callback) {
-						intr_data[k].callback(k,
-								DMA_CC_ERROR,
-								intr_data
-								[k].data);
+					edma_shadow0_write_array(ctlr, SH_SECR,
+								j, (1 << i));
+					if (edma_info[ctlr]->intr_data[k].
+								callback) {
+						edma_info[ctlr]->intr_data[k].
+						callback(k,
+						DMA_CC_ERROR,
+						edma_info[ctlr]->intr_data
+						[k].data);
 					}
 				}
 			}
-		} else if (edma_read(EDMA_QEMR)) {
+		} else if (edma_read(ctlr, EDMA_QEMR)) {
 			dev_dbg(data, "QEMR %02x\n",
-				edma_read(EDMA_QEMR));
+				edma_read(ctlr, EDMA_QEMR));
 			for (i = 0; i < 8; i++) {
-				if (edma_read(EDMA_QEMR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_QEMR) & (1 << i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(EDMA_QEMCR, 1 << i);
-					edma_shadow0_write(SH_QSECR, (1 << i));
+					edma_write(ctlr, EDMA_QEMCR, 1 << i);
+					edma_shadow0_write(ctlr, SH_QSECR,
+								(1 << i));
 
 					/* NOTE:  not reported!! */
 				}
 			}
-		} else if (edma_read(EDMA_CCERR)) {
+		} else if (edma_read(ctlr, EDMA_CCERR)) {
 			dev_dbg(data, "CCERR %08x\n",
-				edma_read(EDMA_CCERR));
+				edma_read(ctlr, EDMA_CCERR));
 			/* FIXME:  CCERR.BIT(16) ignored!  much better
 			 * to just write CCERRCLR with CCERR value...
 			 */
 			for (i = 0; i < 8; i++) {
-				if (edma_read(EDMA_CCERR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_CCERR) & (1 << i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(EDMA_CCERRCLR, 1 << i);
+					edma_write(ctlr, EDMA_CCERRCLR, 1 << i);
 
 					/* NOTE:  not reported!! */
 				}
 			}
 		}
-		if ((edma_read_array(EDMA_EMR, 0) == 0)
-		    && (edma_read_array(EDMA_EMR, 1) == 0)
-		    && (edma_read(EDMA_QEMR) == 0)
-		    && (edma_read(EDMA_CCERR) == 0)) {
+		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0)
+		    && (edma_read_array(ctlr, EDMA_EMR, 1) == 0)
+		    && (edma_read(ctlr, EDMA_QEMR) == 0)
+		    && (edma_read(ctlr, EDMA_CCERR) == 0)) {
 			break;
 		}
 		cnt++;
 		if (cnt > 10)
 			break;
 	}
-	edma_write(EDMA_EEVAL, 1);
+	edma_write(ctlr, EDMA_EEVAL, 1);
 	return IRQ_HANDLED;
 }
 
@@ -484,35 +547,53 @@ int edma_alloc_channel(int channel,
 		void *data,
 		enum dma_event_q eventq_no)
 {
+	unsigned i, done, ctlr = 0;
+
+	if (channel >= 0) {
+		ctlr = EDMA_CTLR(channel);
+		channel = EDMA_CHAN_SLOT(channel);
+	}
+
 	if (channel < 0) {
-		channel = 0;
-		for (;;) {
-			channel = find_next_bit(edma_noevent,
-					num_channels, channel);
-			if (channel == num_channels)
-				return -ENOMEM;
-			if (!test_and_set_bit(channel, edma_inuse))
+		for (i = 0; i < EDMA_MAX_CC; i++) {
+			channel = 0;
+			for (;;) {
+				channel = find_next_bit(edma_info[i]->
+						edma_noevent,
+						edma_info[i]->num_channels,
+						channel);
+				if (channel == edma_info[i]->num_channels)
+					return -ENOMEM;
+				if (!test_and_set_bit(channel,
+						edma_info[i]->edma_inuse)) {
+					done = 1;
+					ctlr = i;
+					break;
+				}
+				channel++;
+			}
+			if (done)
 				break;
-			channel++;
 		}
-	} else if (channel >= num_channels) {
+	} else if (channel >= edma_info[ctlr]->num_channels) {
 		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_inuse)) {
+	} else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
 	/* ensure access through shadow region 0 */
-	edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
 
 	/* ensure no events are pending */
-	edma_stop(channel);
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
 
 	if (callback)
-		setup_dma_interrupt(channel, callback, data);
+		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
+					callback, data);
 
-	map_dmach_queue(channel, eventq_no);
+	map_dmach_queue(ctlr, channel, eventq_no);
 
 	return channel;
 }
@@ -532,15 +613,20 @@ EXPORT_SYMBOL(edma_alloc_channel);
  */
 void edma_free_channel(unsigned channel)
 {
-	if (channel >= num_channels)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel >= edma_info[ctlr]->num_channels)
 		return;
 
 	setup_dma_interrupt(channel, NULL, NULL);
 	/* REVISIT should probably take out of shadow region 0 */
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_inuse);
+	clear_bit(channel, edma_info[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_channel);
 
@@ -558,28 +644,33 @@ EXPORT_SYMBOL(edma_free_channel);
  *
  * Returns the number of the slot, else negative errno.
  */
-int edma_alloc_slot(int slot)
+int edma_alloc_slot(unsigned ctlr, int slot)
 {
+	if (slot >= 0)
+		slot = EDMA_CHAN_SLOT(slot);
+
 	if (slot < 0) {
-		slot = num_channels;
+		slot = edma_info[ctlr]->num_channels;
 		for (;;) {
-			slot = find_next_zero_bit(edma_inuse,
-					num_slots, slot);
-			if (slot == num_slots)
+			slot = find_next_zero_bit(edma_info[ctlr]->edma_inuse,
+					edma_info[ctlr]->num_slots, slot);
+			if (slot == edma_info[ctlr]->num_slots)
 				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_inuse))
+			if (!test_and_set_bit(slot,
+						edma_info[ctlr]->edma_inuse))
 				break;
 		}
-	} else if (slot < num_channels || slot >= num_slots) {
+	} else if (slot < edma_info[ctlr]->num_channels ||
+			slot >= edma_info[ctlr]->num_slots) {
 		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_inuse)) {
+	} else if (test_and_set_bit(slot, edma_info[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
 
-	return slot;
+	return EDMA_CTLR_CHAN(ctlr, slot);
 }
 EXPORT_SYMBOL(edma_alloc_slot);
 
@@ -593,12 +684,18 @@ EXPORT_SYMBOL(edma_alloc_slot);
  */
 void edma_free_slot(unsigned slot)
 {
-	if (slot < num_channels || slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots)
 		return;
 
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_inuse);
+	clear_bit(slot, edma_info[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_slot);
 
@@ -620,8 +717,13 @@ EXPORT_SYMBOL(edma_free_slot);
 void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width width)
 {
-	if (slot < num_slots) {
-		unsigned int i = edma_parm_read(PARM_OPT, slot);
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
 			/* set SAM and program FWID */
@@ -630,11 +732,11 @@ void edma_set_src(unsigned slot, dma_addr_t src_port,
 			/* clear SAM */
 			i &= ~SAM;
 		}
-		edma_parm_write(PARM_OPT, slot, i);
+		edma_parm_write(ctlr, PARM_OPT, slot, i);
 
 		/* set the source port address
 		   in source register of param structure */
-		edma_parm_write(PARM_SRC, slot, src_port);
+		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
 	}
 }
 EXPORT_SYMBOL(edma_set_src);
@@ -653,8 +755,13 @@ EXPORT_SYMBOL(edma_set_src);
 void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 				 enum address_mode mode, enum fifo_width width)
 {
-	if (slot < num_slots) {
-		unsigned int i = edma_parm_read(PARM_OPT, slot);
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
 			/* set DAM and program FWID */
@@ -663,10 +770,10 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port,
 			/* clear DAM */
 			i &= ~DAM;
 		}
-		edma_parm_write(PARM_OPT, slot, i);
+		edma_parm_write(ctlr, PARM_OPT, slot, i);
 		/* set the destination port address
 		   in dest register of param structure */
-		edma_parm_write(PARM_DST, slot, dest_port);
+		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
 	}
 }
 EXPORT_SYMBOL(edma_set_dest);
@@ -683,8 +790,12 @@ EXPORT_SYMBOL(edma_set_dest);
 void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
 {
 	struct edmacc_param temp;
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
 
-	edma_read_slot(slot, &temp);
+	edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp);
 	if (src != NULL)
 		*src = temp.src;
 	if (dst != NULL)
@@ -704,10 +815,15 @@ EXPORT_SYMBOL(edma_get_position);
  */
 void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0xffff0000, src_bidx);
-		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
 				0xffff0000, src_cidx);
 	}
 }
@@ -725,10 +841,15 @@ EXPORT_SYMBOL(edma_set_src_index);
  */
 void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
 				0x0000ffff, dest_cidx << 16);
 	}
 }
@@ -767,16 +888,21 @@ void edma_set_transfer_params(unsigned slot,
 		u16 acnt, u16 bcnt, u16 ccnt,
 		u16 bcnt_rld, enum sync_dimension sync_mode)
 {
-	if (slot < num_slots) {
-		edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_slots) {
+		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
 				0x0000ffff, bcnt_rld << 16);
 		if (sync_mode == ASYNC)
-			edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
 		else
-			edma_parm_or(PARM_OPT, slot, SYNCDIM);
+			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
 		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(PARM_CCNT, slot, ccnt);
+		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
 	}
 }
 EXPORT_SYMBOL(edma_set_transfer_params);
@@ -790,11 +916,19 @@ EXPORT_SYMBOL(edma_set_transfer_params);
  */
 void edma_link(unsigned from, unsigned to)
 {
-	if (from >= num_slots)
+	unsigned ctlr_from, ctlr_to;
+
+	ctlr_from = EDMA_CTLR(from);
+	from = EDMA_CHAN_SLOT(from);
+	ctlr_to = EDMA_CTLR(to);
+	to = EDMA_CHAN_SLOT(to);
+
+	if (from >= edma_info[ctlr_from]->num_slots)
 		return;
-	if (to >= num_slots)
+	if (to >= edma_info[ctlr_to]->num_slots)
 		return;
-	edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
+				PARM_OFFSET(to));
 }
 EXPORT_SYMBOL(edma_link);
 
@@ -807,9 +941,14 @@ EXPORT_SYMBOL(edma_link);
  */
 void edma_unlink(unsigned from)
 {
-	if (from >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(from);
+	from = EDMA_CHAN_SLOT(from);
+
+	if (from >= edma_info[ctlr]->num_slots)
 		return;
-	edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
 }
 EXPORT_SYMBOL(edma_unlink);
 
@@ -829,9 +968,15 @@ EXPORT_SYMBOL(edma_unlink);
  */
 void edma_write_slot(unsigned slot, const struct edmacc_param *param)
 {
-	if (slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot >= edma_info[ctlr]->num_slots)
 		return;
-	memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
+			PARM_SIZE);
 }
 EXPORT_SYMBOL(edma_write_slot);
 
@@ -845,9 +990,15 @@ EXPORT_SYMBOL(edma_write_slot);
  */
 void edma_read_slot(unsigned slot, struct edmacc_param *param)
 {
-	if (slot >= num_slots)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot >= edma_info[ctlr]->num_slots)
 		return;
-	memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+			PARM_SIZE);
 }
 EXPORT_SYMBOL(edma_read_slot);
 
@@ -864,10 +1015,15 @@ EXPORT_SYMBOL(edma_read_slot);
  */
 void edma_pause(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
 	}
 }
 EXPORT_SYMBOL(edma_pause);
@@ -880,10 +1036,15 @@ EXPORT_SYMBOL(edma_pause);
  */
 void edma_resume(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
 	}
 }
 EXPORT_SYMBOL(edma_resume);
@@ -901,28 +1062,33 @@ EXPORT_SYMBOL(edma_resume);
  */
 int edma_start(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = channel >> 5;
 		unsigned int mask = (1 << (channel & 0x1f));
 
 		/* EDMA channels without event association */
-		if (test_bit(channel, edma_noevent)) {
+		if (test_bit(channel, edma_info[ctlr]->edma_noevent)) {
 			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(SH_ESR, j));
-			edma_shadow0_write_array(SH_ESR, j, mask);
+				edma_shadow0_read_array(ctlr, SH_ESR, j));
+			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
 			return 0;
 		}
 
 		/* EDMA channel with event association */
 		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(SH_ER, j));
+			edma_shadow0_read_array(ctlr, SH_ER, j));
 		/* Clear any pending error */
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_shadow0_write_array(SH_EESR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
 		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(SH_EER, j));
+			edma_shadow0_read_array(ctlr, SH_EER, j));
 		return 0;
 	}
 
@@ -941,17 +1107,22 @@ EXPORT_SYMBOL(edma_start);
  */
 void edma_stop(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = channel >> 5;
 		unsigned int mask = (1 << (channel & 0x1f));
 
-		edma_shadow0_write_array(SH_EECR, j, mask);
-		edma_shadow0_write_array(SH_ECR, j, mask);
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 
 		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(SH_EER, j));
+				edma_shadow0_read_array(ctlr, SH_EER, j));
 
 		/* REVISIT:  consider guarding against inappropriate event
 		 * chaining by overwriting with dummy_paramset.
@@ -975,18 +1146,23 @@ EXPORT_SYMBOL(edma_stop);
 
 void edma_clean_channel(unsigned channel)
 {
-	if (channel < num_channels) {
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel < edma_info[ctlr]->num_channels) {
 		int j = (channel >> 5);
 		unsigned int mask = 1 << (channel & 0x1f);
 
 		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(EDMA_EMR, j));
-		edma_shadow0_write_array(SH_ECR, j, mask);
+				edma_read_array(ctlr, EDMA_EMR, j));
+		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
 		/* Clear the corresponding EMR bits */
-		edma_write_array(EDMA_EMCR, j, mask);
+		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
-		edma_shadow0_write_array(SH_SECR, j, mask);
-		edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
+		edma_write(ctlr, EDMA_CCERRCLR, (1 << 16) | 0x3);
 	}
 }
 EXPORT_SYMBOL(edma_clean_channel);
@@ -998,12 +1174,17 @@ EXPORT_SYMBOL(edma_clean_channel);
  */
 void edma_clear_event(unsigned channel)
 {
-	if (channel >= num_channels)
+	unsigned ctlr;
+
+	ctlr = EDMA_CTLR(channel);
+	channel = EDMA_CHAN_SLOT(channel);
+
+	if (channel >= edma_info[ctlr]->num_channels)
 		return;
 	if (channel < 32)
-		edma_write(EDMA_ECR, 1 << channel);
+		edma_write(ctlr, EDMA_ECR, 1 << channel);
 	else
-		edma_write(EDMA_ECRH, 1 << (channel - 32));
+		edma_write(ctlr, EDMA_ECRH, 1 << (channel - 32));
 }
 EXPORT_SYMBOL(edma_clear_event);
 
@@ -1012,62 +1193,129 @@ EXPORT_SYMBOL(edma_clear_event);
 static int __init edma_probe(struct platform_device *pdev)
 {
 	struct edma_soc_info	*info = pdev->dev.platform_data;
-	int			i;
-	int			status;
+	const s8		(*queue_priority_mapping)[2];
+	const s8		(*queue_tc_mapping)[2];
+	int			i, j, found = 0;
+	int			status = -1;
 	const s8		*noevent;
-	int			irq = 0, err_irq = 0;
-	struct resource		*r;
-	resource_size_t		len;
+	int			irq[EDMA_MAX_CC] = {0, 0};
+	int			err_irq[EDMA_MAX_CC] = {0, 0};
+	struct resource		*r[EDMA_MAX_CC] = {NULL};
+	resource_size_t		len[EDMA_MAX_CC];
+	char			res_name[10];
+	char			irq_name[10];
 
 	if (!info)
 		return -ENODEV;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
-	if (!r)
-		return -ENODEV;
+	for (j = 0; j < EDMA_MAX_CC; j++) {
+		sprintf(res_name, "edma_cc%d", j);
+		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						res_name);
+		if (!r[j]) {
+			if (found)
+				break;
+			else
+				return -ENODEV;
+		} else
+			found = 1;
+
+		len[j] = resource_size(r[j]);
+
+		r[j] = request_mem_region(r[j]->start, len[j],
+			dev_name(&pdev->dev));
+		if (!r[j]) {
+			status = -EBUSY;
+			goto fail1;
+		}
 
-	len = r->end - r->start + 1;
+		edmacc_regs_base[j] = ioremap(r[j]->start, len[j]);
+		if (!edmacc_regs_base[j]) {
+			status = -EBUSY;
+			goto fail1;
+		}
 
-	r = request_mem_region(r->start, len, r->name);
-	if (!r)
-		return -EBUSY;
+		edma_info[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		if (!edma_info[j]) {
+			status = -ENOMEM;
+			goto fail1;
+		}
+		memset(edma_info[j], 0, sizeof(struct edma));
+
+		edma_info[j]->num_channels = min_t(unsigned, info[j].n_channel,
+							EDMA_MAX_DMACH);
+		edma_info[j]->num_slots = min_t(unsigned, info[j].n_slot,
+							EDMA_MAX_PARAMENTRY);
+		edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc,
+							EDMA_MAX_CC);
+
+		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
+			edmacc_regs_base[j]);
+
+		for (i = 0; i < edma_info[j]->num_slots; i++)
+			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
+					&dummy_paramset, PARM_SIZE);
+
+		noevent = info[j].noevent;
+		if (noevent) {
+			while (*noevent != -1)
+				set_bit(*noevent++, edma_info[j]->edma_noevent);
+		}
 
-	edmacc_regs_base = ioremap(r->start, len);
-	if (!edmacc_regs_base) {
-		status = -EBUSY;
-		goto fail1;
-	}
+		sprintf(irq_name, "edma%d", j);
+		irq[j] = platform_get_irq_byname(pdev, irq_name);
+		edma_info[j]->irq_res_start = irq[j];
+		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
+					&pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				irq[j], status);
+			goto fail;
+		}
 
-	num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
-	num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+		sprintf(irq_name, "edma%d_err", j);
+		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+		edma_info[j]->irq_res_end = err_irq[j];
+		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
+					"edma_error", &pdev->dev);
+		if (status < 0) {
+			dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+				err_irq[j], status);
+			goto fail;
+		}
 
-	dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+		/* Everything lives on transfer controller 1 until otherwise
+		 * specified. This way, long transfers on the low priority queue
+		 * started by the codec engine will not cause audio defects.
+		 */
+		for (i = 0; i < edma_info[j]->num_channels; i++)
+			map_dmach_queue(j, i, EVENTQ_1);
 
-	for (i = 0; i < num_slots; i++)
-		memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
-				&dummy_paramset, PARM_SIZE);
+		queue_tc_mapping = info[j].queue_tc_mapping;
+		queue_priority_mapping = info[j].queue_priority_mapping;
 
-	noevent = info->noevent;
-	if (noevent) {
-		while (*noevent != -1)
-			set_bit(*noevent++, edma_noevent);
-	}
+		/* Event queue to TC mapping */
+		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+			map_queue_tc(j, queue_tc_mapping[i][0],
+					queue_tc_mapping[i][1]);
 
-	irq = platform_get_irq(pdev, 0);
-	status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
-	if (status < 0) {
-		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-			irq, status);
-		goto fail;
-	}
+		/* Event queue priority mapping */
+		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+			assign_priority_to_queue(j,
+						queue_priority_mapping[i][0],
+						queue_priority_mapping[i][1]);
+
+		/* Map the channel to param entry if channel mapping logic
+		 * exist
+		 */
+		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
+			map_dmach_param(j);
 
-	err_irq = platform_get_irq(pdev, 1);
-	status = request_irq(err_irq, dma_ccerr_handler, 0,
-				"edma_error", &pdev->dev);
-	if (status < 0) {
-		dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
-			err_irq, status);
-		goto fail;
+		for (i = 0; i < info[j].n_region; i++) {
+			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
+			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
+			edma_write_array(j, EDMA_QRAE, i, 0x0);
+		}
 	}
 
 	if (tc_errs_handled) {
@@ -1087,38 +1335,23 @@ static int __init edma_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Everything lives on transfer controller 1 until otherwise specified.
-	 * This way, long transfers on the low priority queue
-	 * started by the codec engine will not cause audio defects.
-	 */
-	for (i = 0; i < num_channels; i++)
-		map_dmach_queue(i, EVENTQ_1);
-
-	/* Event queue to TC mapping */
-	for (i = 0; queue_tc_mapping[i][0] != -1; i++)
-		map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
-
-	/* Event queue priority mapping */
-	for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-		assign_priority_to_queue(queue_priority_mapping[i][0],
-					 queue_priority_mapping[i][1]);
-
-	for (i = 0; i < info->n_region; i++) {
-		edma_write_array2(EDMA_DRAE, i, 0, 0x0);
-		edma_write_array2(EDMA_DRAE, i, 1, 0x0);
-		edma_write_array(EDMA_QRAE, i, 0x0);
-	}
-
 	return 0;
 
 fail:
-	if (err_irq)
-		free_irq(err_irq, NULL);
-	if (irq)
-		free_irq(irq, NULL);
-	iounmap(edmacc_regs_base);
+	for (i = 0; i < EDMA_MAX_CC; i++) {
+		if (err_irq[i])
+			free_irq(err_irq[i], &pdev->dev);
+		if (irq[i])
+			free_irq(irq[i], &pdev->dev);
+	}
 fail1:
-	release_mem_region(r->start, len);
+	for (i = 0; i < EDMA_MAX_CC; i++) {
+		if (r[i])
+			release_mem_region(r[i]->start, len[i]);
+		if (edmacc_regs_base[i])
+			iounmap(edmacc_regs_base[i]);
+		kfree(edma_info[i]);
+	}
 	return status;
 }
 
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index 24a379239d7..ba2ebdd058a 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -170,6 +170,10 @@ enum sync_dimension {
 	ABSYNC = 1
 };
 
+#define EDMA_CTLR_CHAN(ctlr, chan)	(((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i)			((i) >> 16)
+#define EDMA_CHAN_SLOT(i)		((i) & 0xffff)
+
 #define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
 #define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
 
@@ -180,7 +184,7 @@ int edma_alloc_channel(int channel,
 void edma_free_channel(unsigned channel);
 
 /* alloc/free parameter RAM slots */
-int edma_alloc_slot(int slot);
+int edma_alloc_slot(unsigned ctlr, int slot);
 void edma_free_slot(unsigned slot);
 
 /* calls that operate on part of a parameter RAM slot */
@@ -216,9 +220,12 @@ struct edma_soc_info {
 	unsigned	n_region;
 	unsigned	n_slot;
 	unsigned	n_tc;
+	unsigned	n_cc;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
+	const s8	(*queue_tc_mapping)[2];
+	const s8	(*queue_priority_mapping)[2];
 };
 
 #endif
-- 
cgit v1.2.3


From 2bcb613a7919a0a6a7a00408fbfd1c8e471fe060 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 2 Jun 2009 03:38:26 -0400
Subject: davinci: EDMA: add support for dm646x

Enables module clock for DM646x EDMA channel controller and transfer
controller.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index e2410738327..19e989db6f7 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -162,6 +162,41 @@ static struct clk arm_clk = {
 	.flags = ALWAYS_ENABLED,
 };
 
+static struct clk edma_cc_clk = {
+	.name = "edma_cc",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPCC,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc0_clk = {
+	.name = "edma_tc0",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC0,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc1_clk = {
+	.name = "edma_tc1",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC1,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc2_clk = {
+	.name = "edma_tc2",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC2,
+	.flags = ALWAYS_ENABLED,
+};
+
+static struct clk edma_tc3_clk = {
+	.name = "edma_tc3",
+	.parent = &pll1_sysclk2,
+	.lpsc = DM646X_LPSC_TPTC3,
+	.flags = ALWAYS_ENABLED,
+};
+
 static struct clk uart0_clk = {
 	.name = "uart0",
 	.parent = &aux_clkin,
@@ -269,6 +304,11 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
 	CLK(NULL, "dsp", &dsp_clk),
 	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "edma_cc", &edma_cc_clk),
+	CLK(NULL, "edma_tc0", &edma_tc0_clk),
+	CLK(NULL, "edma_tc1", &edma_tc1_clk),
+	CLK(NULL, "edma_tc2", &edma_tc2_clk),
+	CLK(NULL, "edma_tc3", &edma_tc3_clk),
 	CLK(NULL, "uart0", &uart0_clk),
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
-- 
cgit v1.2.3


From 75d0fa70e748629b786c25530f7c5ae76587da35 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Thu, 28 May 2009 05:09:21 -0400
Subject: davinci: dm646x: Adds McASP clock

Adds McASP clock support for the two instances of mcasp (mcasp0,mcasp1). This
patch is part of the audio support for dm646x series.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 19e989db6f7..1391513b738 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -227,6 +227,18 @@ static struct clk gpio_clk = {
 	.lpsc = DM646X_LPSC_GPIO,
 };
 
+static struct clk mcasp0_clk = {
+	.name = "mcasp0",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP0,
+};
+
+static struct clk mcasp1_clk = {
+	.name = "mcasp1",
+	.parent = &pll1_sysclk3,
+	.lpsc = DM646X_LPSC_McASP1,
+};
+
 static struct clk aemif_clk = {
 	.name = "aemif",
 	.parent = &pll1_sysclk3,
@@ -314,6 +326,8 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "mcasp0", &mcasp0_clk),
+	CLK(NULL, "mcasp1", &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
-- 
cgit v1.2.3


From a23f7dc82d48d7fc8377765f6ede907daef4e63b Mon Sep 17 00:00:00 2001
From: David Griego <dgriego@mvista.com>
Date: Mon, 1 Jun 2009 11:41:54 -0700
Subject: davinci: Fix watchdog reset code

The davinci reset routine, davinci_watchdog_reset(), sets the
TCR register instead of the TGCR register as it should to put
the WDT into its "Initial State".

It also writes the WDTCR register without the proper WDKEY
which is pointless since the register will be write-protected.

Signed-off-by: David Griego <dgriego@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/time.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0884ca57bfb..ca85d187176 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -420,11 +420,11 @@ void davinci_watchdog_reset(void)
 
 	/* reset timer, set mode to 64-bit watchdog, and unreset */
 	tgcr = 0;
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 	tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
 	tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 		(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-	__raw_writel(tgcr, base + TCR);
+	__raw_writel(tgcr, base + TGCR);
 
 	/* clear counter and period regs */
 	__raw_writel(0, base + TIM12);
@@ -432,12 +432,8 @@ void davinci_watchdog_reset(void)
 	__raw_writel(0, base + PRD12);
 	__raw_writel(0, base + PRD34);
 
-	/* enable */
-	wdtcr = __raw_readl(base + WDTCR);
-	wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
-	__raw_writel(wdtcr, base + WDTCR);
-
 	/* put watchdog in pre-active state */
+	wdtcr = __raw_readl(base + WDTCR);
 	wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
 		(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
 	__raw_writel(wdtcr, base + WDTCR);
-- 
cgit v1.2.3


From 98d0e9fc6bf1dc8227a7848eea1e28bf19f5a32d Mon Sep 17 00:00:00 2001
From: "Rajashekhara, Sudhakar" <sudhakar.raj@ti.com>
Date: Tue, 2 Jun 2009 06:48:43 -0400
Subject: davinci: dm644x: Support for dm644x silicon revision 2.1

JTAG ID for DM644x silicon revision 2.1 has changed. An entry for the new
silicon revision needs to be added to the davinci_id structure. Without
this addition, EVMs with new silicon revision fail to boot the kernel.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm644x.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d145c0cbfe6..7d51263caf1 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -580,6 +580,13 @@ static struct davinci_id dm644x_ids[] = {
 		.cpu_id		= DAVINCI_CPU_ID_DM6446,
 		.name		= "dm6446",
 	},
+	{
+		.variant	= 0x1,
+		.part_no	= 0xb700,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6446,
+		.name		= "dm6446a",
+	},
 };
 
 static void __iomem *dm644x_psc_bases[] = {
-- 
cgit v1.2.3


From f28f03bba423bbccf102abc9c1921d50a4499d66 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 3 Jun 2009 14:54:27 -0700
Subject: davinci: Kconfig: enable EVMs by default when SoCs are enabled

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index be747f5c6cd..b06cf85fd29 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -26,7 +26,7 @@ comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
-	default y
+	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
@@ -41,6 +41,7 @@ config MACH_SFFSDR
 
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
+	default ARCH_DAVINCI_DM355
 	depends on ARCH_DAVINCI_DM355
 	help
 	  Configure this option to specify the whether the board used
@@ -55,6 +56,7 @@ config MACH_DM355_LEOPARD
 
 config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
+	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
 	help
 	  Configure this option to specify the whether the board used
-- 
cgit v1.2.3


From 1d3bba61f69f447f11aa88e82c5840319962d4cd Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Fri, 5 Jun 2009 21:45:14 -0700
Subject: davinci: sram warning fix

CC      arch/arm/mach-davinci/sram.o
arch/arm/mach-davinci/sram.c: In function 'sram_init':
arch/arm/mach-davinci/sram.c:63: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/sram.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index db54b2a66b4..4f1fc9b318b 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -60,7 +60,7 @@ static int __init sram_init(void)
 	int status = 0;
 
 	if (len) {
-		len = min(len, SRAM_SIZE);
+		len = min_t(unsigned, len, SRAM_SIZE);
 		sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
 		if (!sram_pool)
 			status = -ENOMEM;
-- 
cgit v1.2.3


From 5fcd294df26e6160f32ea551ef074630b4df728d Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 3 Jun 2009 12:24:50 -0700
Subject: davinci: remove watchdog from soc_info

watchdog info is not needed in soc_info, platform_device can
be used directly in core code.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices.c             | 7 ++-----
 arch/arm/mach-davinci/dm355.c               | 1 -
 arch/arm/mach-davinci/dm644x.c              | 1 -
 arch/arm/mach-davinci/dm646x.c              | 1 -
 arch/arm/mach-davinci/include/mach/common.h | 1 -
 arch/arm/mach-davinci/time.c                | 6 +++---
 6 files changed, 5 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 7a2f8ae89be..385e8332fc2 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -216,6 +216,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 static struct resource wdt_resources[] = {
 	{
+		.start	= DAVINCI_WDOG_BASE,
+		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -229,11 +231,6 @@ struct platform_device davinci_wdt_device = {
 
 static void davinci_init_wdt(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
-	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
-
 	platform_device_register(&davinci_wdt_device);
 }
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 373f0c4003a..48f33e42051 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -727,7 +727,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM355_GPIOBNK0,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 7d51263caf1..d20e447a8b4 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -660,7 +660,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 71,
 	.gpio_irq		= IRQ_GPIOBNK0,
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1391513b738..2c76a4d47bf 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -691,7 +691,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 43, /* Only 33 usable */
 	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a1f03b606d8..b21393b24d6 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -60,7 +60,6 @@ struct davinci_soc_info {
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
 	struct davinci_timer_info	*timer_info;
-	void __iomem			*wdt_base;
 	void __iomem			*gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index ca85d187176..0d1b6d407b4 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -406,11 +406,11 @@ struct sys_timer davinci_timer = {
 void davinci_watchdog_reset(void)
 {
 	u32 tgcr, wdtcr;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	void __iomem *base = soc_info->wdt_base;
+	struct platform_device *pdev = &davinci_wdt_device;
+	void __iomem *base = IO_ADDRESS(pdev->resource[0].start);
 	struct clk *wd_clk;
 
-	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
+	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
 	clk_enable(wd_clk);
-- 
cgit v1.2.3


From fb8fcb891390639d6258c816abb537663495da0c Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Thu, 11 Jun 2009 09:41:05 -0400
Subject: davinci: Adding DM365 SOC Support

The patch adds base support for new TI SOC DM365, which s
similar to the dm355.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/clock.c                |   5 +-
 arch/arm/mach-davinci/dm365.c                | 699 +++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/cputype.h |   8 +
 arch/arm/mach-davinci/include/mach/dm365.h   |  29 ++
 arch/arm/mach-davinci/include/mach/irqs.h    |  36 ++
 arch/arm/mach-davinci/include/mach/mux.h     |  81 ++++
 arch/arm/mach-davinci/include/mach/psc.h     |  18 +
 7 files changed, 875 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-davinci/dm365.c
 create mode 100644 arch/arm/mach-davinci/include/mach/dm365.h

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 39bf321d70a..83d54d50b5e 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -227,7 +227,10 @@ static void __init clk_pll_init(struct clk *clk)
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
 		mult = __raw_readl(pll->base + PLLM);
-		mult = (mult & PLLM_PLLM_MASK) + 1;
+		if (cpu_is_davinci_dm365())
+			mult = 2 * (mult & PLLM_PLLM_MASK);
+		else
+			mult = (mult & PLLM_PLLM_MASK) + 1;
 	} else
 		bypass = 1;
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
new file mode 100644
index 00000000000..69d35d94776
--- /dev/null
+++ b/arch/arm/mach-davinci/dm365.c
@@ -0,0 +1,699 @@
+/*
+ * TI DaVinci DM365 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm365.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
+
+static struct pll_data pll1_data = {
+	.num		= 1,
+	.phys_base	= DAVINCI_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct pll_data pll2_data = {
+	.num		= 2,
+	.phys_base	= DAVINCI_PLL2_BASE,
+	.flags		= PLL_HAS_POSTDIV | PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DM365_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+	.name		= "pll1_sysclkbp",
+	.parent		= &pll1_clk,
+	.flags 		= CLK_PLL | PRE_PLL,
+	.div_reg	= BPDIV
+};
+
+static struct clk clkout0_clk = {
+	.name		= "clkout0",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+	.name		= "pll1_sysclk1",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll1_sysclk6",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll1_sysclk8 = {
+	.name		= "pll1_sysclk8",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+	.name		= "pll1_sysclk9",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk pll2_clk = {
+	.name		= "pll2",
+	.parent		= &ref_clk,
+	.flags		= CLK_PLL,
+	.pll_data	= &pll2_data,
+};
+
+static struct clk pll2_aux_clk = {
+	.name		= "pll2_aux_clk",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk clkout1_clk = {
+	.name		= "clkout1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+	.name		= "pll2_sysclk1",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+	.name		= "pll2_sysclk2",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll2_sysclk3 = {
+	.name		= "pll2_sysclk3",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll2_sysclk4 = {
+	.name		= "pll2_sysclk4",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll2_sysclk5 = {
+	.name		= "pll2_sysclk5",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll2_sysclk6 = {
+	.name		= "pll2_sysclk6",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll2_sysclk7 = {
+	.name		= "pll2_sysclk7",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk pll2_sysclk8 = {
+	.name		= "pll2_sysclk8",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV8,
+};
+
+static struct clk pll2_sysclk9 = {
+	.name		= "pll2_sysclk9",
+	.parent		= &pll2_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV9,
+};
+
+static struct clk vpss_dac_clk = {
+	.name		= "vpss_dac",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_DAC_CLK,
+};
+
+static struct clk vpss_master_clk = {
+	.name		= "vpss_master",
+	.parent		= &pll1_sysclk5,
+	.lpsc		= DM365_LPSC_VPSSMSTR,
+	.flags		= CLK_PSC,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm_clk",
+	.parent		= &pll2_sysclk2,
+	.lpsc		= DAVINCI_LPSC_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_UART1,
+};
+
+static struct clk i2c_clk = {
+	.name		= "i2c",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_I2C,
+};
+
+static struct clk mmcsd0_clk = {
+	.name		= "mmcsd0",
+	.parent		= &pll1_sysclk8,
+	.lpsc		= DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+	.name		= "mmcsd1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+	.name		= "spi2",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI2,
+};
+
+static struct clk spi3_clk = {
+	.name		= "spi3",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_SPI3,
+};
+
+static struct clk spi4_clk = {
+	.name		= "spi4",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_SPI4,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+	.name		= "pwm3",
+	.parent		= &ref_clk,
+	.lpsc		= DM365_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+	.name		= "timer0",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+	.name		= "timer1",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+	.name		= "timer2",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DAVINCI_LPSC_TIMER2,
+	.usecount	= 1,
+};
+
+static struct clk timer3_clk = {
+	.name		= "timer3",
+	.parent		= &pll1_aux_clk,
+	.lpsc		= DM365_LPSC_TIMER3,
+};
+
+static struct clk usb_clk = {
+	.name		= "usb",
+	.parent		= &pll2_sysclk1,
+	.lpsc		= DAVINCI_LPSC_USB,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_EMAC,
+};
+
+static struct clk voicecodec_clk = {
+	.name		= "voice_codec",
+	.parent		= &pll2_sysclk4,
+	.lpsc		= DM365_LPSC_VOICE_CODEC,
+};
+
+static struct clk asp0_clk = {
+	.name		= "asp0",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_McBSP1,
+};
+
+static struct clk rto_clk = {
+	.name		= "rto",
+	.parent		= &pll1_sysclk4,
+	.lpsc		= DM365_LPSC_RTO,
+};
+
+static struct clk mjcp_clk = {
+	.name		= "mjcp",
+	.parent		= &pll1_sysclk3,
+	.lpsc		= DM365_LPSC_MJCP,
+};
+
+static struct davinci_clk dm365_clks[] = {
+	CLK(NULL, "ref", &ref_clk),
+	CLK(NULL, "pll1", &pll1_clk),
+	CLK(NULL, "pll1_aux", &pll1_aux_clk),
+	CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+	CLK(NULL, "clkout0", &clkout0_clk),
+	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+	CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+	CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+	CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+	CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+	CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
+	CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
+	CLK(NULL, "pll1_sysclk8", &pll1_sysclk8),
+	CLK(NULL, "pll1_sysclk9", &pll1_sysclk9),
+	CLK(NULL, "pll2", &pll2_clk),
+	CLK(NULL, "pll2_aux", &pll2_aux_clk),
+	CLK(NULL, "clkout1", &clkout1_clk),
+	CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+	CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+	CLK(NULL, "pll2_sysclk3", &pll2_sysclk3),
+	CLK(NULL, "pll2_sysclk4", &pll2_sysclk4),
+	CLK(NULL, "pll2_sysclk5", &pll2_sysclk5),
+	CLK(NULL, "pll2_sysclk6", &pll2_sysclk6),
+	CLK(NULL, "pll2_sysclk7", &pll2_sysclk7),
+	CLK(NULL, "pll2_sysclk8", &pll2_sysclk8),
+	CLK(NULL, "pll2_sysclk9", &pll2_sysclk9),
+	CLK(NULL, "vpss_dac", &vpss_dac_clk),
+	CLK(NULL, "vpss_master", &vpss_master_clk),
+	CLK(NULL, "arm", &arm_clk),
+	CLK(NULL, "uart0", &uart0_clk),
+	CLK(NULL, "uart1", &uart1_clk),
+	CLK("i2c_davinci.1", NULL, &i2c_clk),
+	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+	CLK("spi_davinci.0", NULL, &spi0_clk),
+	CLK("spi_davinci.1", NULL, &spi1_clk),
+	CLK("spi_davinci.2", NULL, &spi2_clk),
+	CLK("spi_davinci.3", NULL, &spi3_clk),
+	CLK("spi_davinci.4", NULL, &spi4_clk),
+	CLK(NULL, "gpio", &gpio_clk),
+	CLK(NULL, "aemif", &aemif_clk),
+	CLK(NULL, "pwm0", &pwm0_clk),
+	CLK(NULL, "pwm1", &pwm1_clk),
+	CLK(NULL, "pwm2", &pwm2_clk),
+	CLK(NULL, "pwm3", &pwm3_clk),
+	CLK(NULL, "timer0", &timer0_clk),
+	CLK(NULL, "timer1", &timer1_clk),
+	CLK("watchdog", NULL, &timer2_clk),
+	CLK(NULL, "timer3", &timer3_clk),
+	CLK(NULL, "usb", &usb_clk),
+	CLK("davinci_emac.1", NULL, &emac_clk),
+	CLK("voice_codec", NULL, &voicecodec_clk),
+	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK(NULL, "rto", &rto_clk),
+	CLK(NULL, "mjcp", &mjcp_clk),
+	CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0		0x00
+#define PINMUX1		0x04
+#define PINMUX2		0x08
+#define PINMUX3		0x0c
+#define PINMUX4		0x10
+#define INTMUX		0x18
+#define EVTMUX		0x1c
+
+
+static const struct mux_config dm365_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
+
+MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
+MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
+
+MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
+MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
+
+MUX_CFG(DM365,	AEMIF_AR,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
+
+MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
+MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
+
+MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
+MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
+
+MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
+MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
+MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
+MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
+MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
+
+MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
+MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
+MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
+#endif
+};
+
+
+static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+	[IRQ_VDINT0]			= 2,
+	[IRQ_VDINT1]			= 6,
+	[IRQ_VDINT2]			= 6,
+	[IRQ_HISTINT]			= 6,
+	[IRQ_H3AINT]			= 6,
+	[IRQ_PRVUINT]			= 6,
+	[IRQ_RSZINT]			= 6,
+	[IRQ_DM365_INSFINT]		= 7,
+	[IRQ_VENCINT]			= 6,
+	[IRQ_ASQINT]			= 6,
+	[IRQ_IMXINT]			= 6,
+	[IRQ_DM365_IMCOPINT]		= 4,
+	[IRQ_USBINT]			= 4,
+	[IRQ_DM365_RTOINT]		= 7,
+	[IRQ_DM365_TINT5]		= 7,
+	[IRQ_DM365_TINT6]		= 5,
+	[IRQ_CCINT0]			= 5,
+	[IRQ_CCERRINT]			= 5,
+	[IRQ_TCERRINT0]			= 5,
+	[IRQ_TCERRINT]			= 7,
+	[IRQ_PSCIN]			= 4,
+	[IRQ_DM365_SPINT2_1]		= 7,
+	[IRQ_DM365_TINT7]		= 7,
+	[IRQ_DM365_SDIOINT0]		= 7,
+	[IRQ_MBXINT]			= 7,
+	[IRQ_MBRINT]			= 7,
+	[IRQ_MMCINT]			= 7,
+	[IRQ_DM365_MMCINT1]		= 7,
+	[IRQ_DM365_PWMINT3]		= 7,
+	[IRQ_DDRINT]			= 4,
+	[IRQ_AEMIFINT]			= 2,
+	[IRQ_DM365_SDIOINT1]		= 2,
+	[IRQ_TINT0_TINT12]		= 7,
+	[IRQ_TINT0_TINT34]		= 7,
+	[IRQ_TINT1_TINT12]		= 7,
+	[IRQ_TINT1_TINT34]		= 7,
+	[IRQ_PWMINT0]			= 7,
+	[IRQ_PWMINT1]			= 3,
+	[IRQ_PWMINT2]			= 3,
+	[IRQ_I2C]			= 3,
+	[IRQ_UARTINT0]			= 3,
+	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM365_SPIINT0_0]		= 3,
+	[IRQ_DM365_SPIINT3_0]		= 3,
+	[IRQ_DM365_GPIO0]		= 3,
+	[IRQ_DM365_GPIO1]		= 7,
+	[IRQ_DM365_GPIO2]		= 4,
+	[IRQ_DM365_GPIO3]		= 4,
+	[IRQ_DM365_GPIO4]		= 7,
+	[IRQ_DM365_GPIO5]		= 7,
+	[IRQ_DM365_GPIO6]		= 7,
+	[IRQ_DM365_GPIO7]		= 7,
+	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
+	[IRQ_DM365_EMAC_RXPULSE]	= 7,
+	[IRQ_DM365_EMAC_TXPULSE]	= 7,
+	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
+	[IRQ_DM365_GPIO12]		= 7,
+	[IRQ_DM365_GPIO13]		= 7,
+	[IRQ_DM365_GPIO14]		= 7,
+	[IRQ_DM365_GPIO15]		= 7,
+	[IRQ_DM365_KEYINT]		= 7,
+	[IRQ_DM365_TCERRINT2]		= 7,
+	[IRQ_DM365_TCERRINT3]		= 7,
+	[IRQ_DM365_EMUINT]		= 7,
+};
+
+static struct map_desc dm365_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= SRAM_VIRT,
+		.pfn		= __phys_to_pfn(0x00010000),
+		.length		= SZ_32K,
+		/* MT_MEMORY_NONCACHED requires supersection alignment */
+		.type		= MT_DEVICE,
+	},
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm365_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365",
+	},
+};
+
+static void __iomem *dm365_psc_bases[] = {
+	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+struct davinci_timer_info dm365_timer_info = {
+	.timers		= davinci_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct plat_serial8250_port dm365_serial_platform_data[] = {
+	{
+		.mapbase	= DAVINCI_UART0_BASE,
+		.irq		= IRQ_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DAVINCI_UART1_BASE,
+		.irq		= IRQ_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags		= 0
+	},
+};
+
+static struct platform_device dm365_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= dm365_serial_platform_data,
+	},
+};
+
+static struct davinci_soc_info davinci_soc_info_dm365 = {
+	.io_desc		= dm365_io_desc,
+	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
+	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.ids			= dm365_ids,
+	.ids_num		= ARRAY_SIZE(dm365_ids),
+	.cpu_clks		= dm365_clks,
+	.psc_bases		= dm365_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_pins		= dm365_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
+	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
+	.intc_irq_prios		= dm365_default_priorities,
+	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
+	.timer_info		= &dm365_timer_info,
+	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_num		= 104,
+	.gpio_irq		= 44,
+	.serial_dev		= &dm365_serial_device,
+	.sram_dma		= 0x00010000,
+	.sram_len		= SZ_32K,
+};
+
+void __init dm365_init(void)
+{
+	davinci_common_init(&davinci_soc_info_dm365);
+}
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index d12a5ed2959..56b92d49e29 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -30,6 +30,7 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM6446		0x64460000
 #define	DAVINCI_CPU_ID_DM6467		0x64670000
 #define	DAVINCI_CPU_ID_DM355		0x03550000
+#define	DAVINCI_CPU_ID_DM365		0x03650000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -40,6 +41,7 @@ static inline int is_davinci_ ##type(void)				\
 IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
 IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
+IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -59,4 +61,10 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 #define cpu_is_davinci_dm355() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DM365
+#define cpu_is_davinci_dm365() is_davinci_dm365()
+#else
+#define cpu_is_davinci_dm365() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
new file mode 100644
index 00000000000..09db4343bb4
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_DM365_H
+#define __ASM_ARCH_DM665_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM365_EMAC_BASE			(0x01D07000)
+#define DM365_EMAC_CNTRL_OFFSET		(0x0000)
+#define DM365_EMAC_CNTRL_MOD_OFFSET	(0x3000)
+#define DM365_EMAC_CNTRL_RAM_OFFSET	(0x1000)
+#define DM365_EMAC_MDIO_OFFSET		(0x4000)
+#define DM365_EMAC_CNTRL_RAM_SIZE	(0x2000)
+
+void __init dm365_init(void);
+
+#endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index bc5d6aaa69a..0d34f2fb099 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -206,4 +206,40 @@
 #define IRQ_DM355_GPIOBNK5	59
 #define IRQ_DM355_GPIOBNK6	60
 
+/* DaVinci DM365-specific Interrupts */
+#define IRQ_DM365_INSFINT	7
+#define IRQ_DM365_IMCOPINT	11
+#define IRQ_DM365_RTOINT	13
+#define IRQ_DM365_TINT5		14
+#define IRQ_DM365_TINT6		15
+#define IRQ_DM365_SPINT2_1	21
+#define IRQ_DM365_TINT7		22
+#define IRQ_DM365_SDIOINT0	23
+#define IRQ_DM365_MMCINT1	27
+#define IRQ_DM365_PWMINT3	28
+#define IRQ_DM365_SDIOINT1	31
+#define IRQ_DM365_SPIINT0_0	42
+#define IRQ_DM365_SPIINT3_0	43
+#define IRQ_DM365_GPIO0		44
+#define IRQ_DM365_GPIO1		45
+#define IRQ_DM365_GPIO2		46
+#define IRQ_DM365_GPIO3		47
+#define IRQ_DM365_GPIO4		48
+#define IRQ_DM365_GPIO5		49
+#define IRQ_DM365_GPIO6		50
+#define IRQ_DM365_GPIO7		51
+#define IRQ_DM365_EMAC_RXTHRESH	52
+#define IRQ_DM365_EMAC_RXPULSE	53
+#define IRQ_DM365_EMAC_TXPULSE	54
+#define IRQ_DM365_EMAC_MISCPULSE 55
+#define IRQ_DM365_GPIO12	56
+#define IRQ_DM365_GPIO13	57
+#define IRQ_DM365_GPIO14	58
+#define IRQ_DM365_GPIO15	59
+#define IRQ_DM365_ADCINT	59
+#define IRQ_DM365_KEYINT	60
+#define IRQ_DM365_TCERRINT2	61
+#define IRQ_DM365_TCERRINT3	62
+#define IRQ_DM365_EMUINT	63
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 27378458542..c182bd458d7 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -156,6 +156,87 @@ enum davinci_dm355_index {
 	DM355_EVT26_MMC0_RX,
 };
 
+enum davinci_dm365_index {
+	/* MMC/SD 0 */
+	DM365_MMCSD0,
+
+	/* MMC/SD 1 */
+	DM365_SD1_CLK,
+	DM365_SD1_CMD,
+	DM365_SD1_DATA3,
+	DM365_SD1_DATA2,
+	DM365_SD1_DATA1,
+	DM365_SD1_DATA0,
+
+	/* I2C */
+	DM365_I2C_SDA,
+	DM365_I2C_SCL,
+
+	/* AEMIF */
+	DM365_AEMIF_AR,
+	DM365_AEMIF_A3,
+	DM365_AEMIF_A7,
+	DM365_AEMIF_D15_8,
+	DM365_AEMIF_CE0,
+
+	/* ASP0 function */
+	DM365_MCBSP0_BDX,
+	DM365_MCBSP0_X,
+	DM365_MCBSP0_BFSX,
+	DM365_MCBSP0_BDR,
+	DM365_MCBSP0_R,
+	DM365_MCBSP0_BFSR,
+
+	/* SPI0 */
+	DM365_SPI0_SCLK,
+	DM365_SPI0_SDI,
+	DM365_SPI0_SDO,
+	DM365_SPI0_SDENA0,
+	DM365_SPI0_SDENA1,
+
+	/* UART */
+	DM365_UART0_RXD,
+	DM365_UART0_TXD,
+	DM365_UART1_RXD,
+	DM365_UART1_TXD,
+	DM365_UART1_RTS,
+	DM365_UART1_CTS,
+
+	/* EMAC */
+	DM365_EMAC_TX_EN,
+	DM365_EMAC_TX_CLK,
+	DM365_EMAC_COL,
+	DM365_EMAC_TXD3,
+	DM365_EMAC_TXD2,
+	DM365_EMAC_TXD1,
+	DM365_EMAC_TXD0,
+	DM365_EMAC_RXD3,
+	DM365_EMAC_RXD2,
+	DM365_EMAC_RXD1,
+	DM365_EMAC_RXD0,
+	DM365_EMAC_RX_CLK,
+	DM365_EMAC_RX_DV,
+	DM365_EMAC_RX_ER,
+	DM365_EMAC_CRS,
+	DM365_EMAC_MDIO,
+	DM365_EMAC_MDCLK,
+
+	/* IRQ muxing */
+	DM365_INT_EDMA_CC,
+	DM365_INT_EDMA_TC0_ERR,
+	DM365_INT_EDMA_TC1_ERR,
+	DM365_INT_PRTCSS,
+	DM365_INT_EMAC_RXTHRESH,
+	DM365_INT_EMAC_RXPULSE,
+	DM365_INT_EMAC_TXPULSE,
+	DM365_INT_EMAC_MISCPULSE,
+
+	/* EDMA event muxing */
+	DM365_EVT2_ASP_TX,
+	DM365_EVT3_ASP_RX,
+	DM365_EVT26_MMC0_RX,
+};
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index ab8a2586d1c..2bb414b1429 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -81,6 +81,24 @@
 #define DM355_LPSC_RTO			12
 #define DM355_LPSC_VPSS_DAC		41
 
+/* DM365 */
+#define DM365_LPSC_TIMER3	5
+#define DM365_LPSC_SPI1		6
+#define DM365_LPSC_MMC_SD1	7
+#define DM365_LPSC_McBSP1	8
+#define DM365_LPSC_PWM3		10
+#define DM365_LPSC_SPI2		11
+#define DM365_LPSC_RTO		12
+#define DM365_LPSC_TIMER4	17
+#define DM365_LPSC_SPI0		22
+#define DM365_LPSC_SPI3		38
+#define DM365_LPSC_SPI4		39
+#define DM365_LPSC_EMAC		40
+#define DM365_LPSC_VOICE_CODEC	44
+#define DM365_LPSC_DAC_CLK	46
+#define DM365_LPSC_VPSSMSTR	47
+#define DM365_LPSC_MJCP		50
+
 /*
  * LPSC Assignments
  */
-- 
cgit v1.2.3


From 37dd00956361528776d1dd76eb303a55b91fb23a Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Tue, 9 Jun 2009 16:28:15 -0400
Subject: davinci: Adding DM365 EVM board support

The patch adds support for Evaluation Module (EVM) board for the dm365
SoC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 76 +++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 arch/arm/mach-davinci/board-dm365-evm.c

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
new file mode 100644
index 00000000000..08c2f12d03d
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -0,0 +1,76 @@
+/*
+ * TI DaVinci DM365 EVM board support
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/dm365.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <linux/i2c.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+}
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm365_evm_map_io(void)
+{
+	dm365_init();
+}
+
+static __init void dm365_evm_init(void)
+{
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+}
+
+static __init void dm365_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (0x80000100),
+	.map_io		= dm365_evm_map_io,
+	.init_irq	= dm365_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= dm365_evm_init,
+MACHINE_END
+
-- 
cgit v1.2.3


From a46e9e403cf930c7a09f7732bba78b38ab14f067 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Tue, 9 Jun 2009 16:28:44 -0400
Subject: davinci: Adding DM365 entries to Makefile/Kconfig/defconfig

This patch does the following
1) Adds entries to davinci_all_defconfig for DM365
2) Adds entries to the Makefile for DM365
3) Adds entries for DM365 in the Kconfig

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/davinci_all_defconfig |  2 ++
 arch/arm/mach-davinci/Kconfig          | 13 +++++++++++++
 arch/arm/mach-davinci/Makefile         |  2 ++
 3 files changed, 17 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ac18662f38c..6eb6d9da0dc 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -191,6 +191,7 @@ CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
+CONFIG_ARCH_DAVINCI_DM365=y
 
 #
 # DaVinci Board Type
@@ -200,6 +201,7 @@ CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
+CONFIG_MACH_DAVINCI_DM365_EVM=y
 CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index b06cf85fd29..b16f5e31c08 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -22,6 +22,11 @@ config ARCH_DAVINCI_DM646x
         bool "DaVinci 646x based system"
 	select AINTC
 
+config ARCH_DAVINCI_DM365
+	bool "DaVinci 365 based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
+
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
@@ -62,6 +67,14 @@ config MACH_DAVINCI_DM6467_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
 
+config MACH_DAVINCI_DM365_EVM
+	bool "TI DM365 EVM"
+	default ARCH_DAVINCI_DM365
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Configure this option to specify whether the board used
+	  for development is a DM365 EVM
+
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 059ab78084b..bea7ba65b3f 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
 obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
 obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -23,3 +24,4 @@ obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
-- 
cgit v1.2.3


From 9f5131538368b299aabcc790f1cece0439e65a5e Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 12:11:09 -0400
Subject: davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c            | 13 +++++++++++++
 arch/arm/mach-davinci/include/mach/mux.h |  5 +++++
 2 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 69d35d94776..c9ae97a476a 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -530,6 +530,19 @@ MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
+
+MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
+
+INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
+INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
+INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
+INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
 #endif
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index c182bd458d7..55765e1fdb7 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -221,10 +221,15 @@ enum davinci_dm365_index {
 	DM365_EMAC_MDIO,
 	DM365_EMAC_MDCLK,
 
+	/* Keypad */
+	DM365_KEYPAD,
+
 	/* IRQ muxing */
 	DM365_INT_EDMA_CC,
 	DM365_INT_EDMA_TC0_ERR,
 	DM365_INT_EDMA_TC1_ERR,
+	DM365_INT_EDMA_TC2_ERR,
+	DM365_INT_EDMA_TC3_ERR,
 	DM365_INT_PRTCSS,
 	DM365_INT_EMAC_RXTHRESH,
 	DM365_INT_EMAC_RXPULSE,
-- 
cgit v1.2.3


From 8ed0a9d4e7cfff439f95d08c882841f25a12bf54 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 12:23:39 -0400
Subject: davinci: dm365: EMAC support for SoC and dm365 EVM

The patch adds Support for EMAC in the DM365 SOC and
the DM365 EVM board.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 66 ++++++++++++++++++++++++++++++++-
 arch/arm/mach-davinci/dm365.c           | 58 +++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 08c2f12d03d..9dda3999c8f 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -19,12 +19,12 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-
+#include <linux/i2c/at24.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-
+#include <mach/mux.h>
 #include <mach/hardware.h>
 #include <mach/dm365.h>
 #include <mach/psc.h>
@@ -34,14 +34,69 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 
+#define DM365_EVM_PHY_MASK		(0x2)
+#define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len       = (256*1024) / 8,
+	.page_size      = 64,
+	.flags          = AT24_FLAG_ADDR16,
+	.setup          = davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+};
+
 static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_freq	= 400	/* kHz */,
 	.bus_delay	= 0	/* usec */,
 };
 
+static void dm365evm_emac_configure(void)
+{
+	/*
+	 * EMAC pins are multiplexed with GPIO and UART
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
+	 */
+	davinci_cfg_reg(DM365_EMAC_TX_EN);
+	davinci_cfg_reg(DM365_EMAC_TX_CLK);
+	davinci_cfg_reg(DM365_EMAC_COL);
+	davinci_cfg_reg(DM365_EMAC_TXD3);
+	davinci_cfg_reg(DM365_EMAC_TXD2);
+	davinci_cfg_reg(DM365_EMAC_TXD1);
+	davinci_cfg_reg(DM365_EMAC_TXD0);
+	davinci_cfg_reg(DM365_EMAC_RXD3);
+	davinci_cfg_reg(DM365_EMAC_RXD2);
+	davinci_cfg_reg(DM365_EMAC_RXD1);
+	davinci_cfg_reg(DM365_EMAC_RXD0);
+	davinci_cfg_reg(DM365_EMAC_RX_CLK);
+	davinci_cfg_reg(DM365_EMAC_RX_DV);
+	davinci_cfg_reg(DM365_EMAC_RX_ER);
+	davinci_cfg_reg(DM365_EMAC_CRS);
+	davinci_cfg_reg(DM365_EMAC_MDIO);
+	davinci_cfg_reg(DM365_EMAC_MDCLK);
+
+	/*
+	 * EMAC interrupts are multiplexed with GPIO interrupts
+	 * Details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
+	 */
+	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
+	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
+	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
 static struct davinci_uart_config uart_config __initdata = {
@@ -55,8 +110,15 @@ static void __init dm365_evm_map_io(void)
 
 static __init void dm365_evm_init(void)
 {
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+
+	dm365evm_emac_configure();
+
+	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
 }
 
 static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c9ae97a476a..9d615db4463 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -546,6 +546,52 @@ INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
 #endif
 };
 
+static struct emac_platform_data dm365_emac_pdata = {
+	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
+	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
+	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
+	.mdio_reg_offset	= DM365_EMAC_MDIO_OFFSET,
+	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct resource dm365_emac_resources[] = {
+	{
+		.start	= DM365_EMAC_BASE,
+		.end	= DM365_EMAC_BASE + 0x47ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXTHRESH,
+		.end	= IRQ_DM365_EMAC_RXTHRESH,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_RXPULSE,
+		.end	= IRQ_DM365_EMAC_RXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_TXPULSE,
+		.end	= IRQ_DM365_EMAC_TXPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_EMAC_MISCPULSE,
+		.end	= IRQ_DM365_EMAC_MISCPULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &dm365_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
+	.resource	= dm365_emac_resources,
+};
 
 static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_VDINT0]			= 2,
@@ -702,6 +748,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.gpio_num		= 104,
 	.gpio_irq		= 44,
 	.serial_dev		= &dm365_serial_device,
+	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
 };
@@ -710,3 +757,14 @@ void __init dm365_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm365);
 }
+
+static int __init dm365_init_devices(void)
+{
+	if (!cpu_is_davinci_dm365())
+		return 0;
+
+	platform_device_register(&dm365_emac_device);
+
+	return 0;
+}
+postcore_initcall(dm365_init_devices);
-- 
cgit v1.2.3


From 15061b5d02ad461620ab7b09d48374fad0e57649 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 13:15:39 -0400
Subject: davinci: dm365: add EDMA support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c | 87 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 9d615db4463..c52aad30084 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -660,6 +660,91 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_DM365_EMUINT]		= 7,
 };
 
+/* Four Transfer Controllers on DM365 */
+static const s8
+dm365_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{2, 2},
+	{3, 3},
+	{-1, -1},
+};
+
+static const s8
+dm365_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 7},
+	{1, 7},
+	{2, 7},
+	{3, 0},
+	{-1, -1},
+};
+
+static struct edma_soc_info dm365_edma_info[] = {
+	{
+		.n_channel		= 64,
+		.n_region		= 4,
+		.n_slot			= 256,
+		.n_tc			= 4,
+		.n_cc			= 1,
+		.queue_tc_mapping	= dm365_queue_tc_mapping,
+		.queue_priority_mapping	= dm365_queue_priority_mapping,
+	},
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= 0x01c00000,
+		.end	= 0x01c00000 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= 0x01c10000,
+		.end	= 0x01c10000 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= 0x01c10400,
+		.end	= 0x01c10400 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc2",
+		.start	= 0x01c10800,
+		.end	= 0x01c10800 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc3",
+		.start	= 0x01c10c00,
+		.end	= 0x01c10c00 + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_CCINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* not using TC*_ERR */
+};
+
+static struct platform_device dm365_edma_device = {
+	.name			= "edma",
+	.id			= 0,
+	.dev.platform_data	= dm365_edma_info,
+	.num_resources		= ARRAY_SIZE(edma_resources),
+	.resource		= edma_resources,
+};
+
 static struct map_desc dm365_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -763,6 +848,8 @@ static int __init dm365_init_devices(void)
 	if (!cpu_is_davinci_dm365())
 		return 0;
 
+	davinci_cfg_reg(DM365_INT_EDMA_CC);
+	platform_device_register(&dm365_edma_device);
 	platform_device_register(&dm365_emac_device);
 
 	return 0;
-- 
cgit v1.2.3


From 19ff3bf2e8473c03bb80052728bfa91c0fdf10f8 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 13:58:32 -0400
Subject: davinci: dm365: add MMC/SD support

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices.c | 45 ++++++++++++++++++++++++++++-------------
 1 file changed, 31 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 385e8332fc2..a55b650db71 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -31,6 +31,8 @@
 #define DAVINCI_MMCSD0_BASE	     0x01E10000
 #define DM355_MMCSD0_BASE	     0x01E11000
 #define DM355_MMCSD1_BASE	     0x01E00000
+#define DM365_MMCSD0_BASE	     0x01D11000
+#define DM365_MMCSD1_BASE	     0x01D00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -154,19 +156,31 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 	 */
 	switch (module) {
 	case 1:
-		if (!cpu_is_davinci_dm355())
+		if (cpu_is_davinci_dm355()) {
+			/* REVISIT we may not need all these pins if e.g. this
+			 * is a hard-wired SDIO device...
+			 */
+			davinci_cfg_reg(DM355_SD1_CMD);
+			davinci_cfg_reg(DM355_SD1_CLK);
+			davinci_cfg_reg(DM355_SD1_DATA0);
+			davinci_cfg_reg(DM355_SD1_DATA1);
+			davinci_cfg_reg(DM355_SD1_DATA2);
+			davinci_cfg_reg(DM355_SD1_DATA3);
+		} else if (cpu_is_davinci_dm365()) {
+			void __iomem *pupdctl1 =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
+
+			/* Configure pull down control */
+			__raw_writel((__raw_readl(pupdctl1) & ~0x400),
+					pupdctl1);
+
+			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
+			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+		} else
 			break;
 
-		/* REVISIT we may not need all these pins if e.g. this
-		 * is a hard-wired SDIO device...
-		 */
-		davinci_cfg_reg(DM355_SD1_CMD);
-		davinci_cfg_reg(DM355_SD1_CLK);
-		davinci_cfg_reg(DM355_SD1_DATA0);
-		davinci_cfg_reg(DM355_SD1_DATA1);
-		davinci_cfg_reg(DM355_SD1_DATA2);
-		davinci_cfg_reg(DM355_SD1_DATA3);
-
 		pdev = &davinci_mmcsd1_device;
 		break;
 	case 0:
@@ -180,9 +194,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 			/* enable RX EDMA */
 			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		}
-
-		else if (cpu_is_davinci_dm644x()) {
+		} else if (cpu_is_davinci_dm365()) {
+			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
+		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
 			void __iomem *base =
 				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
-- 
cgit v1.2.3


From a45c8ba30bca0c3257785cae28680781fd356a85 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 14:00:52 -0400
Subject: davinci: MMC/SD Support for dm365 EVM

Patch adds support for MMC/SD in the DM365 EVM.
Pinmux for MMC/SD slot 1 on the DM365 EVM is also
configured.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9dda3999c8f..e62d1ab3bb2 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -33,6 +33,7 @@
 #include <linux/i2c.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/mmc.h>
 
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -57,6 +58,13 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static struct davinci_mmc_config dm365evm_mmc_config = {
+	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
 static void dm365evm_emac_configure(void)
 {
 	/*
@@ -93,6 +101,21 @@ static void dm365evm_emac_configure(void)
 	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
 }
 
+static void dm365evm_mmc_configure(void)
+{
+	/*
+	 * MMC/SD pins are multiplexed with GPIO and EMIF
+	 * Further details are available at the DM365 ARM
+	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
+	 */
+	davinci_cfg_reg(DM365_SD1_CLK);
+	davinci_cfg_reg(DM365_SD1_CMD);
+	davinci_cfg_reg(DM365_SD1_DATA3);
+	davinci_cfg_reg(DM365_SD1_DATA2);
+	davinci_cfg_reg(DM365_SD1_DATA1);
+	davinci_cfg_reg(DM365_SD1_DATA0);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
@@ -116,6 +139,10 @@ static __init void dm365_evm_init(void)
 	davinci_serial_init(&uart_config);
 
 	dm365evm_emac_configure();
+	dm365evm_mmc_configure();
+
+	davinci_setup_mmc(0, &dm365evm_mmc_config);
+	davinci_setup_mmc(1, &dm365evm_mmc_config);
 
 	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
-- 
cgit v1.2.3


From 37b798da5df377521a8cd32a82467aa2d431f33e Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Sat, 20 Jun 2009 14:15:51 -0400
Subject: davinci: dm365: add NAND support to EVM board

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 84 +++++++++++++++++++++++++++++++++
 1 file changed, 84 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index e62d1ab3bb2..3675e844b9b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -20,6 +20,9 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/i2c/at24.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -34,10 +37,84 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/mmc.h>
+#include <mach/nand.h>
+
+#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
+#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
 
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+/* NOTE:  this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
+ * swap chips with a different block size, partitioning will
+ * need to be changed. This NAND chip MT29F16G08FAA is the default
+ * NAND shipped with the Spectrum Digital DM365 EVM
+ */
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 28 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem1",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_chipsel		= BIT(14),
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW,
+	.options		= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
 static struct at24_platform_data eeprom_info = {
 	.byte_len       = (256*1024) / 8,
 	.page_size      = 64,
@@ -122,6 +199,10 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
+static struct platform_device *dm365_evm_devices[] __initdata = {
+	&davinci_nand_device,
+};
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
@@ -135,6 +216,9 @@ static __init void dm365_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	platform_add_devices(dm365_evm_devices,
+				ARRAY_SIZE(dm365_evm_devices));
+
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
 
-- 
cgit v1.2.3


From ff255c6caa389c90c68f5421f60ebfc40b68ea1b Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Sun, 21 Jun 2009 14:50:12 -0700
Subject: davinci: dm365 evm cpld support: leds, card detect, other setup

Add basic support for the CPLD on the DM365 EVM board:

 - Read SW5 to set up NAND and keypad vs (someday) OneNAND
 - Export MMC/SD card detect and writeprotect signals
 - LED support (same layout as on DM355 EVM)
 - Static config for video input:
     * external HD imager precludes MMC1, Ethernet, audio
     * else either tvp5146 (SD/default) or tvp7002 (HD)

The video input could actually be switched around dynamically;
change that if/when that's needed (and after those other video
inputs have driver support).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 263 ++++++++++++++++++++++++++++++--
 1 file changed, 253 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 3675e844b9b..a1d5e7dac74 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -20,6 +20,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/i2c/at24.h>
+#include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
@@ -33,18 +34,71 @@
 #include <mach/psc.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
-#include <linux/i2c.h>
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
 
+
+static inline int have_imager(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+static inline int have_tvp7002(void)
+{
+	/* REVISIT when it's supported, trigger via Kconfig */
+	return 0;
+}
+
+
 #define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
 #define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
 
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+/*
+ * A MAX-II CPLD is used for various board control functions.
+ */
+#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
+
+#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
+#define CPLD_TEST	CPLD_OFFSET(0,1)
+#define CPLD_LEDS	CPLD_OFFSET(0,2)
+#define CPLD_MUX	CPLD_OFFSET(0,3)
+#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
+#define CPLD_POWER	CPLD_OFFSET(1,1)
+#define CPLD_VIDEO	CPLD_OFFSET(1,2)
+#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
+
+#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
+#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
+
+#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
+#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
+#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
+#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
+#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
+#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
+#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
+#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
+#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
+
+#define CPLD_RESETS	CPLD_OFFSET(4,3)
+
+#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
+#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
+#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
+#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
+#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
+#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
+
+static void __iomem *cpld;
+
+
 /* NOTE:  this is geared for the standard config, with a socketed
  * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
  * swap chips with a different block size, partitioning will
@@ -135,7 +189,27 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static int cpld_mmc_get_cd(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* low == card present */
+	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
+}
+
+static int cpld_mmc_get_ro(int module)
+{
+	if (!cpld)
+		return -ENXIO;
+
+	/* high == card's write protect switch active */
+	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
+}
+
 static struct davinci_mmc_config dm365evm_mmc_config = {
+	.get_cd		= cpld_mmc_get_cd,
+	.get_ro		= cpld_mmc_get_ro,
 	.wires		= 4,
 	.max_freq	= 50000000,
 	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
@@ -199,10 +273,185 @@ static void __init evm_init_i2c(void)
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
-static struct platform_device *dm365_evm_devices[] __initdata = {
+static struct platform_device *dm365_evm_nand_devices[] __initdata = {
 	&davinci_nand_device,
 };
 
+static inline int have_leds(void)
+{
+#ifdef CONFIG_LEDS_CLASS
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+struct cpld_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+static const struct {
+	const char *name;
+	const char *trigger;
+} cpld_leds[] = {
+	{ "dm365evm::ds2", },
+	{ "dm365evm::ds3", },
+	{ "dm365evm::ds4", },
+	{ "dm365evm::ds5", },
+	{ "dm365evm::ds6", "nand-disk", },
+	{ "dm365evm::ds7", "mmc1", },
+	{ "dm365evm::ds8", "mmc0", },
+	{ "dm365evm::ds9", "heartbeat", },
+};
+
+static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	if (b != LED_OFF)
+		reg &= ~led->mask;
+	else
+		reg |= led->mask;
+	__raw_writeb(reg, cpld + CPLD_LEDS);
+}
+
+static enum led_brightness cpld_led_get(struct led_classdev *cdev)
+{
+	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
+	u8 reg = __raw_readb(cpld + CPLD_LEDS);
+
+	return (reg & led->mask) ? LED_OFF : LED_FULL;
+}
+
+static int __init cpld_leds_init(void)
+{
+	int	i;
+
+	if (!have_leds() ||  !cpld)
+		return 0;
+
+	/* setup LEDs */
+	__raw_writeb(0xff, cpld + CPLD_LEDS);
+	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
+		struct cpld_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = cpld_leds[i].name;
+		led->cdev.brightness_set = cpld_led_set;
+		led->cdev.brightness_get = cpld_led_get;
+		led->cdev.default_trigger = cpld_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+/* run after subsys_initcall() for LEDs */
+fs_initcall(cpld_leds_init);
+
+
+static void __init evm_init_cpld(void)
+{
+	u8 mux, resets;
+	const char *label;
+	struct clk *aemif_clk;
+
+	/* Make sure we can configure the CPLD through CS1.  Then
+	 * leave it on for later access to MMC and LED registers.
+	 */
+	aemif_clk = clk_get(NULL, "aemif");
+	if (IS_ERR(aemif_clk))
+		return;
+	clk_enable(aemif_clk);
+
+	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
+			"cpld") == NULL)
+		goto fail;
+	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
+	if (!cpld) {
+		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
+				SECTION_SIZE);
+fail:
+		pr_err("ERROR: can't map CPLD\n");
+		clk_disable(aemif_clk);
+		return;
+	}
+
+	/* External muxing for some signals */
+	mux = 0;
+
+	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
+	 * NOTE:  SW4 bus width setting must match!
+	 */
+	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
+		/* external keypad mux */
+		mux |= BIT(7);
+
+		platform_add_devices(dm365_evm_nand_devices,
+				ARRAY_SIZE(dm365_evm_nand_devices));
+	} else {
+		/* no OneNAND support yet */
+	}
+
+	/* Leave external chips in reset when unused. */
+	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
+
+	/* Static video input config with SN74CBT16214 1-of-3 mux:
+	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
+	 *  - port b2 == imager (mux lowbits == 2 or 7)
+	 *  - port b3 == tvp5146 (mux lowbits == 5)
+	 *
+	 * Runtime switching could work too, with limitations.
+	 */
+	if (have_imager()) {
+		label = "HD imager";
+		mux |= 1;
+
+		/* externally mux MMC1/ENET/AIC33 to imager */
+		mux |= BIT(6) | BIT(5) | BIT(3);
+	} else {
+		struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+		/* we can use MMC1 ... */
+		dm365evm_mmc_configure();
+		davinci_setup_mmc(1, &dm365evm_mmc_config);
+
+		/* ... and ENET ... */
+		dm365evm_emac_configure();
+		soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
+		soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+		resets &= ~BIT(3);
+
+		/* ... and AIC33 */
+		resets &= ~BIT(1);
+
+		if (have_tvp7002()) {
+			mux |= 2;
+			resets &= ~BIT(2);
+			label = "tvp7002 HD";
+		} else {
+			/* default to tvp5146 */
+			mux |= 5;
+			resets &= ~BIT(0);
+			label = "tvp5146 SD";
+		}
+	}
+	__raw_writeb(mux, cpld + CPLD_MUX);
+	__raw_writeb(resets, cpld + CPLD_RESETS);
+	pr_info("EVM: %s video input\n", label);
+
+	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
+}
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
@@ -214,11 +463,6 @@ static void __init dm365_evm_map_io(void)
 
 static __init void dm365_evm_init(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	platform_add_devices(dm365_evm_devices,
-				ARRAY_SIZE(dm365_evm_devices));
-
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
 
@@ -226,10 +470,9 @@ static __init void dm365_evm_init(void)
 	dm365evm_mmc_configure();
 
 	davinci_setup_mmc(0, &dm365evm_mmc_config);
-	davinci_setup_mmc(1, &dm365evm_mmc_config);
 
-	soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+	/* maybe setup mmc1/etc ... _after_ mmc0 */
+	evm_init_cpld();
 }
 
 static __init void dm365_evm_irq_init(void)
-- 
cgit v1.2.3


From 55c79a40e34566e9d198f6205b0cf06e3d89ac0a Mon Sep 17 00:00:00 2001
From: "Mark A. Greer" <mgreer@mvista.com>
Date: Wed, 3 Jun 2009 18:36:54 -0700
Subject: davinci: da8xx: Add base DA830/OMAP-L137 SoC support

The da830/omap l137 is a new SoC from TI that is similar
to the davinci line.  Since its so similar to davinci,
put the support for the da830 in the same directory as
the davinci code.

There are differences, however.  Some of those differences
prevent support for davinci and da830 platforms to work
in the same kernel binary.  Those differences are:

1) Different physical address for RAM.  This is relevant
   to Makefile.boot addresses and PHYS_OFFSET.  The
   Makefile.boot issue isn't truly a kernel issue but
   it means u-boot won't work with a uImage including
   both architectures.  The PHYS_OFFSET issue is
   addressed by the "Allow for runtime-determined
   PHYS_OFFSET" patch by Lennert Buytenhek but it
   hasn't been accepted yet.

2) Different uart addresses.  This is only an issue
   for the 'addruart' assembly macro when CONFIG_DEBUG_LL
   is enabled.  Since the code in that macro is called
   so early (e.g., by _error_p in kernel/head.S when
   the processor lookup fails), we can't determine what
   platform the kernel is running on at runtime to use
   the correct uart address.

These areas have compile errors intentionally inserted
to indicate to the builder they're doing something wrong.

A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added
to distinguish between a true davinci architecture and
the da830 architecture.

Note that the da830 currently has an issue with writeback
data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be
enabled when building a da830 kernel.

Additional generalizations for future SoCs in the da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig                |   14 +
 arch/arm/mach-davinci/Makefile               |   11 +-
 arch/arm/mach-davinci/Makefile.boot          |   10 +
 arch/arm/mach-davinci/da830.c                | 1247 ++++++++++++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c        |  287 ++++++
 arch/arm/mach-davinci/include/mach/cputype.h |    8 +
 arch/arm/mach-davinci/include/mach/da8xx.h   |   69 ++
 arch/arm/mach-davinci/include/mach/edma.h    |   48 +
 arch/arm/mach-davinci/include/mach/irqs.h    |  109 ++-
 arch/arm/mach-davinci/include/mach/memory.h  |    9 +-
 arch/arm/mach-davinci/include/mach/mux.h     |  404 +++++++++
 arch/arm/mach-davinci/include/mach/psc.h     |   41 +
 arch/arm/mach-davinci/include/mach/serial.h  |    4 +
 13 files changed, 2252 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm/mach-davinci/da830.c
 create mode 100644 arch/arm/mach-davinci/devices-da8xx.c
 create mode 100644 arch/arm/mach-davinci/include/mach/da8xx.h

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index b16f5e31c08..312228ed848 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -6,6 +6,9 @@ config AINTC
 config CP_INTC
 	bool
 
+config ARCH_DAVINCI_DMx
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
@@ -13,14 +16,25 @@ comment "DaVinci Core Type"
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM355
         bool "DaVinci 355 based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM646x
         bool "DaVinci 646x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+        bool "DA830/OMAP-L137 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA8XX
+	bool
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index bea7ba65b3f..385638c0a71 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,15 +5,16 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o devices.o dma.o usb.o common.o sram.o
+			   gpio.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
index e1dd366f836..db97ef2c647 100644
--- a/arch/arm/mach-davinci/Makefile.boot
+++ b/arch/arm/mach-davinci/Makefile.boot
@@ -1,3 +1,13 @@
+ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
+ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
+$(error Cannot enable DaVinci and DA8XX platforms concurrently)
+else
+   zreladdr-y	:= 0xc0008000
+params_phys-y	:= 0xc0000100
+initrd_phys-y	:= 0xc0800000
+endif
+else
    zreladdr-y	:= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x80800000
+endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
new file mode 100644
index 00000000000..ab4242869b6
--- /dev/null
+++ b/arch/arm/mach-davinci/da830.c
@@ -0,0 +1,1247 @@
+/*
+ * TI DA830/OMAP L137 chip specific setup
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DA830_PSC0_BASE		0x01c10000
+#define DA830_PLL0_BASE		0x01c11000
+#define DA830_JTAG_ID_REG	0x01c14018
+#define DA830_TIMER64P0_BASE	0x01c20000
+#define DA830_TIMER64P1_BASE	0x01c21000
+#define DA830_GPIO_BASE		0x01e26000
+#define DA830_PSC1_BASE		0x01e27000
+
+/* Offsets of the 8 compare registers on the da830 */
+#define DA830_CMP12_0		0x60
+#define DA830_CMP12_1		0x64
+#define DA830_CMP12_2		0x68
+#define DA830_CMP12_3		0x6c
+#define DA830_CMP12_4		0x70
+#define DA830_CMP12_5		0x74
+#define DA830_CMP12_6		0x78
+#define DA830_CMP12_7		0x7c
+
+#define DA830_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA830_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA830_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr0_ss_clk = {
+	.name		= "scr0_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR0_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr1_ss_clk = {
+	.name		= "scr1_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR1_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk scr2_ss_clk = {
+	.name		= "scr2_ss",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SCR2_SS,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk dmax_clk = {
+	.name		= "dmax",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_DMAX,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc_clk = {
+	.name		= "tpcc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk spi0_clk = {
+	.name		= "spi0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_SPI0,
+};
+
+static struct clk spi1_clk = {
+	.name		= "spi1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_SPI1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap0_clk = {
+	.name		= "ecap0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap1_clk = {
+	.name		= "ecap1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk ecap2_clk = {
+	.name		= "ecap2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_ECAP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm0_clk = {
+	.name		= "pwm0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm1_clk = {
+	.name		= "pwm1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk pwm2_clk = {
+	.name		= "pwm2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_PWM,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep0_clk = {
+	.name		= "eqep0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk eqep1_clk = {
+	.name		= "eqep1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_EQEP,
+	.psc_ctlr	= 1,
+};
+
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp0_clk = {
+	.name		= "mcasp0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp1_clk = {
+	.name		= "mcasp1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk mcasp2_clk = {
+	.name		= "mcasp2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA830_LPSC1_McASP2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb20_clk = {
+	.name		= "usb20",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_USB20,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk secu_mgr_clk = {
+	.name		= "secu_mgr",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_SECU_MGR,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk usb11_clk = {
+	.name		= "usb11",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_USB11,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct davinci_clk da830_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"scr0_ss",	&scr0_ss_clk),
+	CLK(NULL,		"scr1_ss",	&scr1_ss_clk),
+	CLK(NULL,		"scr2_ss",	&scr2_ss_clk),
+	CLK(NULL,		"dmax",		&dmax_clk),
+	CLK(NULL,		"tpcc",		&tpcc_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK("dm_spi.0",		NULL,		&spi0_clk),
+	CLK("dm_spi.1",		NULL,		&spi1_clk),
+	CLK(NULL,		"ecap0",	&ecap0_clk),
+	CLK(NULL,		"ecap1",	&ecap1_clk),
+	CLK(NULL,		"ecap2",	&ecap2_clk),
+	CLK(NULL,		"pwm0",		&pwm0_clk),
+	CLK(NULL,		"pwm1",		&pwm1_clk),
+	CLK(NULL,		"pwm2",		&pwm2_clk),
+	CLK("eqep.0",		NULL,		&eqep0_clk),
+	CLK("eqep.1",		NULL,		&eqep1_clk),
+	CLK("da830_lcdc",	NULL,		&lcdc_clk),
+	CLK("soc-audio.0",	NULL,		&mcasp0_clk),
+	CLK("soc-audio.1",	NULL,		&mcasp1_clk),
+	CLK("soc-audio.2",	NULL,		&mcasp2_clk),
+	CLK("musb_hdrc",	NULL,		&usb20_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"secu_mgr",	&secu_mgr_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"usb11",	&usb11_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define PINMUX5			0x14
+#define PINMUX6			0x18
+#define PINMUX7			0x1c
+#define PINMUX8			0x20
+#define PINMUX9			0x24
+#define PINMUX10		0x28
+#define PINMUX11		0x2c
+#define PINMUX12		0x30
+#define PINMUX13		0x34
+#define PINMUX14		0x38
+#define PINMUX15		0x3c
+#define PINMUX16		0x40
+#define PINMUX17		0x44
+#define PINMUX18		0x48
+#define PINMUX19		0x4c
+
+/*
+ * Device specific mux setup
+ *
+ *	     soc      description	mux    mode    mode   mux	dbg
+ *					reg   offset   mask   mode
+ */
+static const struct mux_config da830_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	MUX_CFG(DA830, GPIO7_14,	0,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, RTCK,		0,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_15,	0,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMU_0,		0,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_SDCKE,	0,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK_GLUE,	0,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_CLK,		0,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMB_CS_0,	0,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_CAS,	0,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_RAS,	0,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE,		0,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_1,	1,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_BA_0,	1,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_0,		1,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_1,		1,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_2,		1,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_3,		1,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_4,		1,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_5,		1,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_0,		1,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_1,		1,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_2,		1,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_3,		1,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_4,		1,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_5,		1,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_6,		1,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_7,		1,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_A_6,		2,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_7,		2,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_8,		2,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_9,		2,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_10,	2,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_11,	2,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_A_12,	2,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_31,	2,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO7_8,		2,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_9,		2,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_10,	2,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_11,	2,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_12,	2,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO7_13,	2,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_13,	2,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_30,	3,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_29,	3,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_28,	3,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_27,	3,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_26,	3,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_25,	3,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_24,	3,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_23,	3,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_22,	4,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_21,	4,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_20,	4,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_19,	4,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_18,	4,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_17,	4,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_16,	4,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_3,	4,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_2,	5,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_0,		5,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_1,		5,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_2,		5,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_3,		5,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_4,		5,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_5,		5,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_6,		5,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_0,		5,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_1,		5,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_2,		5,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_3,		5,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_4,		5,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_5,		5,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_6,		5,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_7,		6,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_8,		6,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_9,		6,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_10,	6,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_11,	6,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_12,	6,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_13,	6,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMB_D_14,	6,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, GPIO6_7,		6,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_8,		6,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_9,		6,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_10,	6,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_11,	6,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_12,	6,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_13,	6,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO6_14,	6,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMB_D_15,	7,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_1,	7,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMB_WE_DQM_0,	7,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SOMI_0,	7,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_SIMO_0,	7,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI0_CLK,	7,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_ENA,	7,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI0_SCS_0,	7,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP0I,		7,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0S,		7,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1I,		7,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_CTS,	7,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUART0_RTS,	7,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP0A,		7,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, EQEP0B,		7,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO6_15,	7,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_14,	7,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_15,	7,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_0,		7,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_1,		7,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_2,		7,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_3,		7,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_4,		7,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, SPI1_SOMI_0,	8,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_SIMO_0,	8,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, SPI1_CLK,	8,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_RXD,	8,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, UART0_TXD,	8,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_10,		8,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_11,		8,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NSPI1_ENA,	8,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, I2C1_SCL,	8,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C1_SDA,	8,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1S,		8,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SDA,	8,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, I2C0_SCL,	8,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UART2_RXD,	8,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, TM64P0_IN12,	8,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, TM64P0_OUT12,	8,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_5,		8,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_6,		8,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_7,		8,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_8,		8,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_9,		8,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_10,	8,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_11,	8,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO5_12,	8,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NSPI1_SCS_0,	9,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, USB0_DRVVBUS,	9,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX0,		9,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX0,		9,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX0,		9,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKR0,		9,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR0,		9,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR0,		9,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UART2_TXD,	9,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, AHCLKX2,		9,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP0_APWM0,	9,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_MHZ_50_CLK,	9,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, ECAP1_APWM1,	9,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, USB_REFCLKIN,	9,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO5_13,	9,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_15,	9,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_11,	9,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_12,	9,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_13,	9,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_14,	9,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_15,	9,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_12,	9,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AMUTE0,		10,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_0,		10,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_1,		10,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_2,		10,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_3,		10,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_4,		10,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_5,		10,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_6,		10,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, RMII_TXD_0,	10,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXD_1,	10,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_TXEN,	10,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_CRS_DV,	10,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_0,	10,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXD_1,	10,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, RMII_RXER,	10,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AFSR2,		10,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKX2,		10,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_3,		10,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_2,		10,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR2_1,		10,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AFSX2,		10,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, ACLKR2,		10,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, NRESETOUT,	10,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_0,		10,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_1,		10,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_2,		10,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_3,		10,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_4,		10,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_5,		10,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_6,		10,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR0_7,		11,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_8,		11,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_RXD,	11,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, UART1_TXD,	11,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR0_11,		11,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AHCLKX1,		11,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKX1,		11,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSX1,		11,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MDIO_CLK,	11,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MDIO_D,		11,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_9,		11,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_10,		11,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0B,		11,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM0A,		11,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWMSYNCI,	11,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR2_0,		11,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, EPWMSYNC0,	11,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO3_7,		11,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_8,		11,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_9,		11,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_10,	11,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_11,	11,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_14,	11,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO3_15,	11,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_10,	11,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AHCLKR1,		12,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, ACLKR1,		12,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AFSR1,		12,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AMUTE1,		12,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_0,		12,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_1,		12,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_2,		12,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_3,		12,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, ECAP2_APWM2,	12,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EHRPWMGLUETZ,	12,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EQEP1A,		12,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO4_11,	12,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_12,	12,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_13,	12,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_14,	12,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_0,		12,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_1,		12,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_2,		12,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_3,		12,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, AXR1_4,		13,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_5,		13,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_6,		13,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_7,		13,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_8,		13,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, AXR1_9,		13,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_0,		13,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_1,		13,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, EQEP1B,		13,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2B,		13,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM2A,		13,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1B,		13,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, EPWM1A,		13,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_0,	13,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_1,	13,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_0,	13,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_1,	13,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO4_4,		13,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_5,		13,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_6,		13,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_7,		13,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_8,		13,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO4_9,		13,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_0,		13,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_1,		13,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_2,		14,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_3,		14,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_4,		14,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_5,		14,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_6,		14,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_7,		14,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_8,		14,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_9,		14,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_DAT_2,	14,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_3,	14,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_4,	14,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_5,	14,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_6,	14,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_DAT_7,	14,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_8,	14,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_9,	14,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_2,	14,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_3,	14,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_4,	14,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_5,	14,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_6,	14,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HD_7,	14,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_8,		14,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_9,		14,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_2,		14,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_3,		14,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_4,		14,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_5,		14,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_6,		14,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_7,		14,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_8,		14,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_9,		14,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_D_10,	15,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_11,	15,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_12,	15,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_13,	15,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_14,	15,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_D_15,	15,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_0,		15,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_1,		15,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, UHPI_HD_10,	15,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_11,	15,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_12,	15,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_13,	15,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_14,	15,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HD_15,	15,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_7,		15,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, MMCSD_CLK,	15,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_10,	15,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_11,	15,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_12,	15,	8,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_13,	15,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_14,	15,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, LCD_D_15,	15,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, UHPI_HCNTL0,	15,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO0_10,	15,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_11,	15,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_12,	15,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_13,	15,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_14,	15,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO0_15,	15,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_0,		15,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_1,		15,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_2,		16,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_3,		16,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_4,		16,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_5,		16,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_6,		16,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_7,		16,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_8,		16,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_9,		16,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, MMCSD_CMD,	16,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_6,		16,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_3,		16,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_2,		16,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_1,		16,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_0,		16,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_PCLK,	16,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_HSYNC,	16,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HCNTL1,	16,	0,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_2,		16,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_3,		16,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_4,		16,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_5,		16,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_6,		16,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_7,		16,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_8,		16,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_9,		16,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_A_10,	17,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_11,	17,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_A_12,	17,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_1,	17,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_BA_0,	17,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_CLK,		17,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, EMA_SDCKE,	17,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CAS,	17,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, LCD_VSYNC,	17,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, NLCD_AC_ENB_CS,	17,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_MCLK,	17,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_5,		17,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, LCD_D_4,		17,	16,	0xf,	2,	false)
+	MUX_CFG(DA830, OBSCLK,		17,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NEMA_CS_4,	17,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HHWIL,	17,	12,	0xf,	4,	false)
+	MUX_CFG(DA830, AHCLKR2,		17,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO1_10,	17,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_11,	17,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_12,	17,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_13,	17,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_14,	17,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO1_15,	17,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_0,		17,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_1,		17,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, NEMA_RAS,	18,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE,		18,	4,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_0,	18,	8,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_2,	18,	12,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_3,	18,	16,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_OE,		18,	20,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_1,	18,	24,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_WE_DQM_0,	18,	28,	0xf,	1,	false)
+	MUX_CFG(DA830, NEMA_CS_5,	18,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, UHPI_HRNW,	18,	4,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HAS,	18,	8,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HCS,	18,	12,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS1,	18,	20,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HDS2,	18,	24,	0xf,	2,	false)
+	MUX_CFG(DA830, NUHPI_HINT,	18,	28,	0xf,	2,	false)
+	MUX_CFG(DA830, AXR0_12,		18,	4,	0xf,	4,	false)
+	MUX_CFG(DA830, AMUTE2,		18,	16,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_13,		18,	20,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_14,		18,	24,	0xf,	4,	false)
+	MUX_CFG(DA830, AXR0_15,		18,	28,	0xf,	4,	false)
+	MUX_CFG(DA830, GPIO2_2,		18,	0,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_3,		18,	4,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_4,		18,	8,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_5,		18,	12,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_6,		18,	16,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_7,		18,	20,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_8,		18,	24,	0xf,	8,	false)
+	MUX_CFG(DA830, GPIO2_9,		18,	28,	0xf,	8,	false)
+	MUX_CFG(DA830, EMA_WAIT_0,	19,	0,	0xf,	1,	false)
+	MUX_CFG(DA830, NUHPI_HRDY,	19,	0,	0xf,	2,	false)
+	MUX_CFG(DA830, GPIO2_10,	19,	0,	0xf,	8,	false)
+#endif
+};
+
+const short da830_emif25_pins[] __initdata = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
+	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
+	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
+	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
+	-1
+};
+
+const short da830_spi0_pins[] __initdata = {
+	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	-1
+};
+
+const short da830_spi1_pins[] __initdata = {
+	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
+	DA830_NSPI1_SCS_0,
+	-1
+};
+
+const short da830_mmc_sd_pins[] __initdata = {
+	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+	DA830_MMCSD_CMD,
+	-1
+};
+
+const short da830_uart0_pins[] __initdata = {
+	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
+	-1
+};
+
+const short da830_uart1_pins[] __initdata = {
+	DA830_UART1_RXD, DA830_UART1_TXD,
+	-1
+};
+
+const short da830_uart2_pins[] __initdata = {
+	DA830_UART2_RXD, DA830_UART2_TXD,
+	-1
+};
+
+const short da830_usb20_pins[] __initdata = {
+	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_usb11_pins[] __initdata = {
+	DA830_USB_REFCLKIN,
+	-1
+};
+
+const short da830_uhpi_pins[] __initdata = {
+	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
+	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
+	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
+	-1
+};
+
+const short da830_cpgmac_pins[] __initdata = {
+	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	-1
+};
+
+const short da830_emif3c_pins[] __initdata = {
+	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
+	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
+	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
+	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
+	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
+	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
+	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
+	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
+	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
+	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
+	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
+	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
+	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
+	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
+	-1
+};
+
+const short da830_mcasp0_pins[] __initdata = {
+	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
+	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
+	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
+	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
+	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
+	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
+	-1
+};
+
+const short da830_mcasp1_pins[] __initdata = {
+	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
+	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
+	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
+	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
+	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
+	-1
+};
+
+const short da830_mcasp2_pins[] __initdata = {
+	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
+	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
+	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
+	-1
+};
+
+const short da830_i2c0_pins[] __initdata = {
+	DA830_I2C0_SDA, DA830_I2C0_SCL,
+	-1
+};
+
+const short da830_i2c1_pins[] __initdata = {
+	DA830_I2C1_SCL, DA830_I2C1_SDA,
+	-1
+};
+
+const short da830_lcdcntl_pins[] __initdata = {
+	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
+	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
+	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
+	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
+	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	-1
+};
+
+const short da830_pwm_pins[] __initdata = {
+	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
+	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
+	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
+	-1
+};
+
+const short da830_ecap0_pins[] __initdata = {
+	DA830_ECAP0_APWM0,
+	-1
+};
+
+const short da830_ecap1_pins[] __initdata = {
+	DA830_ECAP1_APWM1,
+	-1
+};
+
+const short da830_ecap2_pins[] __initdata = {
+	DA830_ECAP2_APWM2,
+	-1
+};
+
+const short da830_eqep0_pins[] __initdata = {
+	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
+	-1
+};
+
+const short da830_eqep1_pins[] __initdata = {
+	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
+	-1
+};
+
+int da830_pinmux_setup(const short pins[])
+{
+	int i, error = -EINVAL;
+
+	if (pins)
+		for (i = 0; pins[i] >= 0; i++) {
+			error = davinci_cfg_reg(pins[i]);
+			if (error)
+				break;
+		}
+
+	return error;
+}
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA830_MPUERR]		= 7,
+	[IRQ_DA830_IOPUERR]		= 7,
+	[IRQ_DA830_BOOTCFGERR]		= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA830_EHRPWM2]		= 7,
+	[IRQ_DA830_EHRPWM2TZ]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA830_EQEP0]		= 7,
+	[IRQ_DA830_EQEP1]		= 7,
+	[IRQ_DA830_T12CMPINT0_0]	= 7,
+	[IRQ_DA830_T12CMPINT1_0]	= 7,
+	[IRQ_DA830_T12CMPINT2_0]	= 7,
+	[IRQ_DA830_T12CMPINT3_0]	= 7,
+	[IRQ_DA830_T12CMPINT4_0]	= 7,
+	[IRQ_DA830_T12CMPINT5_0]	= 7,
+	[IRQ_DA830_T12CMPINT6_0]	= 7,
+	[IRQ_DA830_T12CMPINT7_0]	= 7,
+	[IRQ_DA830_T12CMPINT0_1]	= 7,
+	[IRQ_DA830_T12CMPINT1_1]	= 7,
+	[IRQ_DA830_T12CMPINT2_1]	= 7,
+	[IRQ_DA830_T12CMPINT3_1]	= 7,
+	[IRQ_DA830_T12CMPINT4_1]	= 7,
+	[IRQ_DA830_T12CMPINT5_1]	= 7,
+	[IRQ_DA830_T12CMPINT6_1]	= 7,
+	[IRQ_DA830_T12CMPINT7_1]	= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da830_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da830_psc_bases[] = {
+	IO_ADDRESS(DA830_PSC0_BASE),
+	IO_ADDRESS(DA830_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da830_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap l137",
+	},
+};
+
+static struct davinci_timer_instance da830_timer_instance[2] = {
+	{
+		.base		= IO_ADDRESS(DA830_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA830_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+		.cmp_off	= DA830_CMP12_0,
+		.cmp_irq	= IRQ_DA830_T12CMPINT0_1,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event & clocksource
+ * T0_TOP: Timer 0, top			: Used by DSP
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da830_timer_info = {
+	.timers		= da830_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_BOT,
+};
+
+static struct davinci_soc_info davinci_soc_info_da830 = {
+	.io_desc		= da830_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA830_JTAG_ID_REG),
+	.ids			= da830_ids,
+	.ids_num		= ARRAY_SIZE(da830_ids),
+	.cpu_clks		= da830_clks,
+	.psc_bases		= da830_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da830_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da830_default_priorities,
+	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
+	.timer_info		= &da830_timer_info,
+	.gpio_base		= IO_ADDRESS(DA830_GPIO_BASE),
+	.gpio_num		= 128,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da830_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da830);
+}
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
new file mode 100644
index 00000000000..c367055ae9b
--- /dev/null
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -0,0 +1,287 @@
+/*
+ * DA8XX/OMAP L1XX platform device data
+ *
+ * Copyright (c) 2007-2009, MontaVista Software, Inc. <source@mvista.com>
+ * Derived from code that was:
+ *	Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+
+#define DA8XX_TPCC_BASE			0x01c00000
+#define DA8XX_TPTC0_BASE		0x01c08000
+#define DA8XX_TPTC1_BASE		0x01c08400
+#define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
+#define DA8XX_I2C0_BASE			0x01c22000
+#define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
+#define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
+#define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
+#define DA8XX_EMAC_MDIO_BASE		0x01e24000
+#define DA8XX_GPIO_BASE			0x01e26000
+#define DA8XX_I2C1_BASE			0x01e28000
+
+#define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
+#define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
+#define DA8XX_EMAC_RAM_OFFSET		0x0000
+#define DA8XX_MDIO_REG_OFFSET		0x4000
+#define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
+
+static struct plat_serial8250_port da8xx_serial_pdata[] = {
+	{
+		.mapbase	= DA8XX_UART0_BASE,
+		.irq		= IRQ_DA8XX_UARTINT0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART1_BASE,
+		.irq		= IRQ_DA8XX_UARTINT1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= DA8XX_UART2_BASE,
+		.irq		= IRQ_DA8XX_UARTINT2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+	},
+	{
+		.flags	= 0,
+	},
+};
+
+struct platform_device da8xx_serial_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM,
+	.dev	= {
+		.platform_data	= da8xx_serial_pdata,
+	},
+};
+
+static const s8 da8xx_dma_chan_no_event[] = {
+	20, 21,
+	-1
+};
+
+static const s8 da8xx_queue_tc_mapping[][2] = {
+	/* {event queue no, TC no} */
+	{0, 0},
+	{1, 1},
+	{-1, -1}
+};
+
+static const s8 da8xx_queue_priority_mapping[][2] = {
+	/* {event queue no, Priority} */
+	{0, 3},
+	{1, 7},
+	{-1, -1}
+};
+
+static struct edma_soc_info da8xx_edma_info[] = {
+	{
+		.n_channel		= 32,
+		.n_region		= 4,
+		.n_slot			= 128,
+		.n_tc			= 2,
+		.n_cc			= 1,
+		.noevent		= da8xx_dma_chan_no_event,
+		.queue_tc_mapping	= da8xx_queue_tc_mapping,
+		.queue_priority_mapping	= da8xx_queue_priority_mapping,
+	},
+};
+
+static struct resource da8xx_edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= DA8XX_TPCC_BASE,
+		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= DA8XX_TPTC0_BASE,
+		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= DA8XX_TPTC1_BASE,
+		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_DA8XX_TCERRINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_DA8XX_CCERRINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_edma_device = {
+	.name		= "edma",
+	.id		= -1,
+	.dev = {
+		.platform_data	= da8xx_edma_info,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_edma_resources),
+	.resource	= da8xx_edma_resources,
+};
+
+int __init da8xx_register_edma(void)
+{
+	return platform_device_register(&da8xx_edma_device);
+}
+
+static struct resource da8xx_i2c_resources0[] = {
+	{
+		.start	= DA8XX_I2C0_BASE,
+		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT0,
+		.end	= IRQ_DA8XX_I2CINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device0 = {
+	.name		= "i2c_davinci",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
+	.resource	= da8xx_i2c_resources0,
+};
+
+static struct resource da8xx_i2c_resources1[] = {
+	{
+		.start	= DA8XX_I2C1_BASE,
+		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_I2CINT1,
+		.end	= IRQ_DA8XX_I2CINT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_i2c_device1 = {
+	.name		= "i2c_davinci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
+	.resource	= da8xx_i2c_resources1,
+};
+
+int __init da8xx_register_i2c(int instance,
+		struct davinci_i2c_platform_data *pdata)
+{
+	struct platform_device *pdev;
+
+	if (instance == 0)
+		pdev = &da8xx_i2c_device0;
+	else if (instance == 1)
+		pdev = &da8xx_i2c_device1;
+	else
+		return -EINVAL;
+
+	pdev->dev.platform_data = pdata;
+	return platform_device_register(pdev);
+}
+
+static struct resource da8xx_watchdog_resources[] = {
+	{
+		.start	= DA8XX_WDOG_BASE,
+		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device davinci_wdt_device = {
+	.name		= "watchdog",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
+	.resource	= da8xx_watchdog_resources,
+};
+
+int __init da8xx_register_watchdog(void)
+{
+	return platform_device_register(&davinci_wdt_device);
+}
+
+static struct resource da8xx_emac_resources[] = {
+	{
+		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
+		.end	= DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_THRESH_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_RX_PULSE,
+		.end	= IRQ_DA8XX_C0_RX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_TX_PULSE,
+		.end	= IRQ_DA8XX_C0_TX_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_C0_MISC_PULSE,
+		.end	= IRQ_DA8XX_C0_MISC_PULSE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct emac_platform_data da8xx_emac_pdata = {
+	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
+	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
+	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
+	.mdio_reg_offset	= DA8XX_MDIO_REG_OFFSET,
+	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
+	.version		= EMAC_VERSION_2,
+};
+
+static struct platform_device da8xx_emac_device = {
+	.name		= "davinci_emac",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &da8xx_emac_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
+	.resource	= da8xx_emac_resources,
+};
+
+int __init da8xx_register_emac(void)
+{
+	return platform_device_register(&da8xx_emac_device);
+}
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index 56b92d49e29..fd41189e5c6 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -31,6 +31,7 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM6467		0x64670000
 #define	DAVINCI_CPU_ID_DM355		0x03550000
 #define	DAVINCI_CPU_ID_DM365		0x03650000
+#define	DAVINCI_CPU_ID_DA830		0x08300000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -42,6 +43,7 @@ IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
 IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
+IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -67,4 +69,10 @@ IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 #define cpu_is_davinci_dm365() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DA830
+#define cpu_is_davinci_da830() is_davinci_da830()
+#else
+#define cpu_is_davinci_da830() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
new file mode 100644
index 00000000000..084db271c7c
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -0,0 +1,69 @@
+/*
+ * Chip specific defines for DA8XX/OMAP L1XX SoC
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
+#define __ASM_ARCH_DAVINCI_DA8XX_H
+
+#include <mach/serial.h>
+#include <mach/edma.h>
+#include <mach/i2c.h>
+#include <mach/emac.h>
+
+/*
+ * The cp_intc interrupt controller for the da8xx isn't in the same
+ * chunk of physical memory space as the other registers (like it is
+ * on the davincis) so it needs to be mapped separately.  It will be
+ * mapped early on when the I/O space is mapped and we'll put it just
+ * before the I/O space in the processor's virtual memory space.
+ */
+#define DA8XX_CP_INTC_BASE	0xfffee000
+#define DA8XX_CP_INTC_SIZE	SZ_8K
+#define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
+
+#define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
+
+void __init da830_init(void);
+
+int da8xx_register_edma(void);
+int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
+int da8xx_register_watchdog(void);
+int da8xx_register_emac(void);
+
+extern struct platform_device da8xx_serial_device;
+extern struct emac_platform_data da8xx_emac_pdata;
+
+extern const short da830_emif25_pins[];
+extern const short da830_spi0_pins[];
+extern const short da830_spi1_pins[];
+extern const short da830_mmc_sd_pins[];
+extern const short da830_uart0_pins[];
+extern const short da830_uart1_pins[];
+extern const short da830_uart2_pins[];
+extern const short da830_usb20_pins[];
+extern const short da830_usb11_pins[];
+extern const short da830_uhpi_pins[];
+extern const short da830_cpgmac_pins[];
+extern const short da830_emif3c_pins[];
+extern const short da830_mcasp0_pins[];
+extern const short da830_mcasp1_pins[];
+extern const short da830_mcasp2_pins[];
+extern const short da830_i2c0_pins[];
+extern const short da830_i2c1_pins[];
+extern const short da830_lcdcntl_pins[];
+extern const short da830_pwm_pins[];
+extern const short da830_ecap0_pins[];
+extern const short da830_ecap1_pins[];
+extern const short da830_ecap2_pins[];
+extern const short da830_eqep0_pins[];
+extern const short da830_eqep1_pins[];
+
+int da830_pinmux_setup(const short pins[]);
+
+#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index ba2ebdd058a..a85cbedc9b0 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -139,6 +139,54 @@ struct edmacc_param {
 #define DAVINCI_DMA_PWM1                 53
 #define DAVINCI_DMA_PWM2                 54
 
+/* DA830 specific EDMA3 information */
+#define EDMA_DA830_NUM_DMACH		32
+#define EDMA_DA830_NUM_TCC		32
+#define EDMA_DA830_NUM_PARAMENTRY	128
+#define EDMA_DA830_NUM_EVQUE		2
+#define EDMA_DA830_NUM_TC		2
+#define EDMA_DA830_CHMAP_EXIST		0
+#define EDMA_DA830_NUM_REGIONS		4
+#define DA830_DMACH2EVENT_MAP0		0x000FC03Fu
+#define DA830_DMACH2EVENT_MAP1		0x00000000u
+#define DA830_EDMA_ARM_OWN		0x30FFCCFFu
+
+/* DA830 specific EDMA3 Events Information */
+enum DA830_edma_ch {
+	DA830_DMACH_MCASP0_RX,
+	DA830_DMACH_MCASP0_TX,
+	DA830_DMACH_MCASP1_RX,
+	DA830_DMACH_MCASP1_TX,
+	DA830_DMACH_MCASP2_RX,
+	DA830_DMACH_MCASP2_TX,
+	DA830_DMACH_GPIO_BNK0INT,
+	DA830_DMACH_GPIO_BNK1INT,
+	DA830_DMACH_UART0_RX,
+	DA830_DMACH_UART0_TX,
+	DA830_DMACH_TMR64P0_EVTOUT12,
+	DA830_DMACH_TMR64P0_EVTOUT34,
+	DA830_DMACH_UART1_RX,
+	DA830_DMACH_UART1_TX,
+	DA830_DMACH_SPI0_RX,
+	DA830_DMACH_SPI0_TX,
+	DA830_DMACH_MMCSD_RX,
+	DA830_DMACH_MMCSD_TX,
+	DA830_DMACH_SPI1_RX,
+	DA830_DMACH_SPI1_TX,
+	DA830_DMACH_DMAX_EVTOUT6,
+	DA830_DMACH_DMAX_EVTOUT7,
+	DA830_DMACH_GPIO_BNK2INT,
+	DA830_DMACH_GPIO_BNK3INT,
+	DA830_DMACH_I2C0_RX,
+	DA830_DMACH_I2C0_TX,
+	DA830_DMACH_I2C1_RX,
+	DA830_DMACH_I2C1_TX,
+	DA830_DMACH_GPIO_BNK4INT,
+	DA830_DMACH_GPIO_BNK5INT,
+	DA830_DMACH_UART2_RX,
+	DA830_DMACH_UART2_TX
+};
+
 /*ch_status paramater of callback function possible values*/
 #define DMA_COMPLETE 1
 #define DMA_CC_ERROR 2
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 0d34f2fb099..735e378d27e 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -99,9 +99,6 @@
 #define IRQ_EMUINT       63
 
 #define DAVINCI_N_AINTC_IRQ	64
-#define DAVINCI_N_GPIO		104
-
-#define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
 
 #define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
 
@@ -242,4 +239,110 @@
 #define IRQ_DM365_TCERRINT3	62
 #define IRQ_DM365_EMUINT	63
 
+/* DA8XX interrupts */
+#define IRQ_DA8XX_COMMTX		0
+#define IRQ_DA8XX_COMMRX		1
+#define IRQ_DA8XX_NINT			2
+#define IRQ_DA8XX_EVTOUT0		3
+#define IRQ_DA8XX_EVTOUT1		4
+#define IRQ_DA8XX_EVTOUT2		5
+#define IRQ_DA8XX_EVTOUT3		6
+#define IRQ_DA8XX_EVTOUT4		7
+#define IRQ_DA8XX_EVTOUT5		8
+#define IRQ_DA8XX_EVTOUT6		9
+#define IRQ_DA8XX_EVTOUT7		10
+#define IRQ_DA8XX_CCINT0		11
+#define IRQ_DA8XX_CCERRINT		12
+#define IRQ_DA8XX_TCERRINT0		13
+#define IRQ_DA8XX_AEMIFINT		14
+#define IRQ_DA8XX_I2CINT0		15
+#define IRQ_DA8XX_MMCSDINT0		16
+#define IRQ_DA8XX_MMCSDINT1		17
+#define IRQ_DA8XX_ALLINT0		18
+#define IRQ_DA8XX_RTC			19
+#define IRQ_DA8XX_SPINT0		20
+#define IRQ_DA8XX_TINT12_0		21
+#define IRQ_DA8XX_TINT34_0		22
+#define IRQ_DA8XX_TINT12_1		23
+#define IRQ_DA8XX_TINT34_1		24
+#define IRQ_DA8XX_UARTINT0		25
+#define IRQ_DA8XX_KEYMGRINT		26
+#define IRQ_DA8XX_SECINT		26
+#define IRQ_DA8XX_SECKEYERR		26
+#define IRQ_DA8XX_CHIPINT0		28
+#define IRQ_DA8XX_CHIPINT1		29
+#define IRQ_DA8XX_CHIPINT2		30
+#define IRQ_DA8XX_CHIPINT3		31
+#define IRQ_DA8XX_TCERRINT1		32
+#define IRQ_DA8XX_C0_RX_THRESH_PULSE	33
+#define IRQ_DA8XX_C0_RX_PULSE		34
+#define IRQ_DA8XX_C0_TX_PULSE		35
+#define IRQ_DA8XX_C0_MISC_PULSE		36
+#define IRQ_DA8XX_C1_RX_THRESH_PULSE	37
+#define IRQ_DA8XX_C1_RX_PULSE		38
+#define IRQ_DA8XX_C1_TX_PULSE		39
+#define IRQ_DA8XX_C1_MISC_PULSE		40
+#define IRQ_DA8XX_MEMERR		41
+#define IRQ_DA8XX_GPIO0			42
+#define IRQ_DA8XX_GPIO1			43
+#define IRQ_DA8XX_GPIO2			44
+#define IRQ_DA8XX_GPIO3			45
+#define IRQ_DA8XX_GPIO4			46
+#define IRQ_DA8XX_GPIO5			47
+#define IRQ_DA8XX_GPIO6			48
+#define IRQ_DA8XX_GPIO7			49
+#define IRQ_DA8XX_GPIO8			50
+#define IRQ_DA8XX_I2CINT1		51
+#define IRQ_DA8XX_LCDINT		52
+#define IRQ_DA8XX_UARTINT1		53
+#define IRQ_DA8XX_MCASPINT		54
+#define IRQ_DA8XX_ALLINT1		55
+#define IRQ_DA8XX_SPINT1		56
+#define IRQ_DA8XX_UHPI_INT1		57
+#define IRQ_DA8XX_USB_INT		58
+#define IRQ_DA8XX_IRQN			59
+#define IRQ_DA8XX_RWAKEUP		60
+#define IRQ_DA8XX_UARTINT2		61
+#define IRQ_DA8XX_DFTSSINT		62
+#define IRQ_DA8XX_EHRPWM0		63
+#define IRQ_DA8XX_EHRPWM0TZ		64
+#define IRQ_DA8XX_EHRPWM1		65
+#define IRQ_DA8XX_EHRPWM1TZ		66
+#define IRQ_DA8XX_ECAP0			69
+#define IRQ_DA8XX_ECAP1			70
+#define IRQ_DA8XX_ECAP2			71
+#define IRQ_DA8XX_ARMCLKSTOPREQ		90
+
+/* DA830 specific interrupts */
+#define IRQ_DA830_MPUERR		27
+#define IRQ_DA830_IOPUERR		27
+#define IRQ_DA830_BOOTCFGERR		27
+#define IRQ_DA830_EHRPWM2		67
+#define IRQ_DA830_EHRPWM2TZ		68
+#define IRQ_DA830_EQEP0			72
+#define IRQ_DA830_EQEP1			73
+#define IRQ_DA830_T12CMPINT0_0		74
+#define IRQ_DA830_T12CMPINT1_0		75
+#define IRQ_DA830_T12CMPINT2_0		76
+#define IRQ_DA830_T12CMPINT3_0		77
+#define IRQ_DA830_T12CMPINT4_0		78
+#define IRQ_DA830_T12CMPINT5_0		79
+#define IRQ_DA830_T12CMPINT6_0		80
+#define IRQ_DA830_T12CMPINT7_0		81
+#define IRQ_DA830_T12CMPINT0_1		82
+#define IRQ_DA830_T12CMPINT1_1		83
+#define IRQ_DA830_T12CMPINT2_1		84
+#define IRQ_DA830_T12CMPINT3_1		85
+#define IRQ_DA830_T12CMPINT4_1		86
+#define IRQ_DA830_T12CMPINT5_1		87
+#define IRQ_DA830_T12CMPINT6_1		88
+#define IRQ_DA830_T12CMPINT7_1		89
+
+#define DA830_N_CP_INTC_IRQ		96
+
+/* da830 currently has the most gpio pins (128) */
+#define DAVINCI_N_GPIO			128
+/* da830 currently has the most irqs so use DA830_N_CP_INTC_IRQ */
+#define NR_IRQS				(DA830_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
+
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index c712c7cdf38..80309aed534 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -20,9 +20,16 @@
 /**************************************************************************
  * Definitions
  **************************************************************************/
-#define DAVINCI_DDR_BASE    0x80000000
+#define DAVINCI_DDR_BASE	0x80000000
+#define DA8XX_DDR_BASE		0xc0000000
 
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
+#define PHYS_OFFSET DA8XX_DDR_BASE
+#else
 #define PHYS_OFFSET DAVINCI_DDR_BASE
+#endif
 
 /*
  * Increase size of DMA-consistent memory region
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 55765e1fdb7..ae4f6dd3623 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -242,6 +242,410 @@ enum davinci_dm365_index {
 	DM365_EVT26_MMC0_RX,
 };
 
+enum da830_index {
+	DA830_GPIO7_14,
+	DA830_RTCK,
+	DA830_GPIO7_15,
+	DA830_EMU_0,
+	DA830_EMB_SDCKE,
+	DA830_EMB_CLK_GLUE,
+	DA830_EMB_CLK,
+	DA830_NEMB_CS_0,
+	DA830_NEMB_CAS,
+	DA830_NEMB_RAS,
+	DA830_NEMB_WE,
+	DA830_EMB_BA_1,
+	DA830_EMB_BA_0,
+	DA830_EMB_A_0,
+	DA830_EMB_A_1,
+	DA830_EMB_A_2,
+	DA830_EMB_A_3,
+	DA830_EMB_A_4,
+	DA830_EMB_A_5,
+	DA830_GPIO7_0,
+	DA830_GPIO7_1,
+	DA830_GPIO7_2,
+	DA830_GPIO7_3,
+	DA830_GPIO7_4,
+	DA830_GPIO7_5,
+	DA830_GPIO7_6,
+	DA830_GPIO7_7,
+	DA830_EMB_A_6,
+	DA830_EMB_A_7,
+	DA830_EMB_A_8,
+	DA830_EMB_A_9,
+	DA830_EMB_A_10,
+	DA830_EMB_A_11,
+	DA830_EMB_A_12,
+	DA830_EMB_D_31,
+	DA830_GPIO7_8,
+	DA830_GPIO7_9,
+	DA830_GPIO7_10,
+	DA830_GPIO7_11,
+	DA830_GPIO7_12,
+	DA830_GPIO7_13,
+	DA830_GPIO3_13,
+	DA830_EMB_D_30,
+	DA830_EMB_D_29,
+	DA830_EMB_D_28,
+	DA830_EMB_D_27,
+	DA830_EMB_D_26,
+	DA830_EMB_D_25,
+	DA830_EMB_D_24,
+	DA830_EMB_D_23,
+	DA830_EMB_D_22,
+	DA830_EMB_D_21,
+	DA830_EMB_D_20,
+	DA830_EMB_D_19,
+	DA830_EMB_D_18,
+	DA830_EMB_D_17,
+	DA830_EMB_D_16,
+	DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2,
+	DA830_EMB_D_0,
+	DA830_EMB_D_1,
+	DA830_EMB_D_2,
+	DA830_EMB_D_3,
+	DA830_EMB_D_4,
+	DA830_EMB_D_5,
+	DA830_EMB_D_6,
+	DA830_GPIO6_0,
+	DA830_GPIO6_1,
+	DA830_GPIO6_2,
+	DA830_GPIO6_3,
+	DA830_GPIO6_4,
+	DA830_GPIO6_5,
+	DA830_GPIO6_6,
+	DA830_EMB_D_7,
+	DA830_EMB_D_8,
+	DA830_EMB_D_9,
+	DA830_EMB_D_10,
+	DA830_EMB_D_11,
+	DA830_EMB_D_12,
+	DA830_EMB_D_13,
+	DA830_EMB_D_14,
+	DA830_GPIO6_7,
+	DA830_GPIO6_8,
+	DA830_GPIO6_9,
+	DA830_GPIO6_10,
+	DA830_GPIO6_11,
+	DA830_GPIO6_12,
+	DA830_GPIO6_13,
+	DA830_GPIO6_14,
+	DA830_EMB_D_15,
+	DA830_NEMB_WE_DQM_1,
+	DA830_NEMB_WE_DQM_0,
+	DA830_SPI0_SOMI_0,
+	DA830_SPI0_SIMO_0,
+	DA830_SPI0_CLK,
+	DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	DA830_EQEP0I,
+	DA830_EQEP0S,
+	DA830_EQEP1I,
+	DA830_NUART0_CTS,
+	DA830_NUART0_RTS,
+	DA830_EQEP0A,
+	DA830_EQEP0B,
+	DA830_GPIO6_15,
+	DA830_GPIO5_14,
+	DA830_GPIO5_15,
+	DA830_GPIO5_0,
+	DA830_GPIO5_1,
+	DA830_GPIO5_2,
+	DA830_GPIO5_3,
+	DA830_GPIO5_4,
+	DA830_SPI1_SOMI_0,
+	DA830_SPI1_SIMO_0,
+	DA830_SPI1_CLK,
+	DA830_UART0_RXD,
+	DA830_UART0_TXD,
+	DA830_AXR1_10,
+	DA830_AXR1_11,
+	DA830_NSPI1_ENA,
+	DA830_I2C1_SCL,
+	DA830_I2C1_SDA,
+	DA830_EQEP1S,
+	DA830_I2C0_SDA,
+	DA830_I2C0_SCL,
+	DA830_UART2_RXD,
+	DA830_TM64P0_IN12,
+	DA830_TM64P0_OUT12,
+	DA830_GPIO5_5,
+	DA830_GPIO5_6,
+	DA830_GPIO5_7,
+	DA830_GPIO5_8,
+	DA830_GPIO5_9,
+	DA830_GPIO5_10,
+	DA830_GPIO5_11,
+	DA830_GPIO5_12,
+	DA830_NSPI1_SCS_0,
+	DA830_USB0_DRVVBUS,
+	DA830_AHCLKX0,
+	DA830_ACLKX0,
+	DA830_AFSX0,
+	DA830_AHCLKR0,
+	DA830_ACLKR0,
+	DA830_AFSR0,
+	DA830_UART2_TXD,
+	DA830_AHCLKX2,
+	DA830_ECAP0_APWM0,
+	DA830_RMII_MHZ_50_CLK,
+	DA830_ECAP1_APWM1,
+	DA830_USB_REFCLKIN,
+	DA830_GPIO5_13,
+	DA830_GPIO4_15,
+	DA830_GPIO2_11,
+	DA830_GPIO2_12,
+	DA830_GPIO2_13,
+	DA830_GPIO2_14,
+	DA830_GPIO2_15,
+	DA830_GPIO3_12,
+	DA830_AMUTE0,
+	DA830_AXR0_0,
+	DA830_AXR0_1,
+	DA830_AXR0_2,
+	DA830_AXR0_3,
+	DA830_AXR0_4,
+	DA830_AXR0_5,
+	DA830_AXR0_6,
+	DA830_RMII_TXD_0,
+	DA830_RMII_TXD_1,
+	DA830_RMII_TXEN,
+	DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0,
+	DA830_RMII_RXD_1,
+	DA830_RMII_RXER,
+	DA830_AFSR2,
+	DA830_ACLKX2,
+	DA830_AXR2_3,
+	DA830_AXR2_2,
+	DA830_AXR2_1,
+	DA830_AFSX2,
+	DA830_ACLKR2,
+	DA830_NRESETOUT,
+	DA830_GPIO3_0,
+	DA830_GPIO3_1,
+	DA830_GPIO3_2,
+	DA830_GPIO3_3,
+	DA830_GPIO3_4,
+	DA830_GPIO3_5,
+	DA830_GPIO3_6,
+	DA830_AXR0_7,
+	DA830_AXR0_8,
+	DA830_UART1_RXD,
+	DA830_UART1_TXD,
+	DA830_AXR0_11,
+	DA830_AHCLKX1,
+	DA830_ACLKX1,
+	DA830_AFSX1,
+	DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	DA830_AXR0_9,
+	DA830_AXR0_10,
+	DA830_EPWM0B,
+	DA830_EPWM0A,
+	DA830_EPWMSYNCI,
+	DA830_AXR2_0,
+	DA830_EPWMSYNC0,
+	DA830_GPIO3_7,
+	DA830_GPIO3_8,
+	DA830_GPIO3_9,
+	DA830_GPIO3_10,
+	DA830_GPIO3_11,
+	DA830_GPIO3_14,
+	DA830_GPIO3_15,
+	DA830_GPIO4_10,
+	DA830_AHCLKR1,
+	DA830_ACLKR1,
+	DA830_AFSR1,
+	DA830_AMUTE1,
+	DA830_AXR1_0,
+	DA830_AXR1_1,
+	DA830_AXR1_2,
+	DA830_AXR1_3,
+	DA830_ECAP2_APWM2,
+	DA830_EHRPWMGLUETZ,
+	DA830_EQEP1A,
+	DA830_GPIO4_11,
+	DA830_GPIO4_12,
+	DA830_GPIO4_13,
+	DA830_GPIO4_14,
+	DA830_GPIO4_0,
+	DA830_GPIO4_1,
+	DA830_GPIO4_2,
+	DA830_GPIO4_3,
+	DA830_AXR1_4,
+	DA830_AXR1_5,
+	DA830_AXR1_6,
+	DA830_AXR1_7,
+	DA830_AXR1_8,
+	DA830_AXR1_9,
+	DA830_EMA_D_0,
+	DA830_EMA_D_1,
+	DA830_EQEP1B,
+	DA830_EPWM2B,
+	DA830_EPWM2A,
+	DA830_EPWM1B,
+	DA830_EPWM1A,
+	DA830_MMCSD_DAT_0,
+	DA830_MMCSD_DAT_1,
+	DA830_UHPI_HD_0,
+	DA830_UHPI_HD_1,
+	DA830_GPIO4_4,
+	DA830_GPIO4_5,
+	DA830_GPIO4_6,
+	DA830_GPIO4_7,
+	DA830_GPIO4_8,
+	DA830_GPIO4_9,
+	DA830_GPIO0_0,
+	DA830_GPIO0_1,
+	DA830_EMA_D_2,
+	DA830_EMA_D_3,
+	DA830_EMA_D_4,
+	DA830_EMA_D_5,
+	DA830_EMA_D_6,
+	DA830_EMA_D_7,
+	DA830_EMA_D_8,
+	DA830_EMA_D_9,
+	DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3,
+	DA830_MMCSD_DAT_4,
+	DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6,
+	DA830_MMCSD_DAT_7,
+	DA830_UHPI_HD_8,
+	DA830_UHPI_HD_9,
+	DA830_UHPI_HD_2,
+	DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4,
+	DA830_UHPI_HD_5,
+	DA830_UHPI_HD_6,
+	DA830_UHPI_HD_7,
+	DA830_LCD_D_8,
+	DA830_LCD_D_9,
+	DA830_GPIO0_2,
+	DA830_GPIO0_3,
+	DA830_GPIO0_4,
+	DA830_GPIO0_5,
+	DA830_GPIO0_6,
+	DA830_GPIO0_7,
+	DA830_GPIO0_8,
+	DA830_GPIO0_9,
+	DA830_EMA_D_10,
+	DA830_EMA_D_11,
+	DA830_EMA_D_12,
+	DA830_EMA_D_13,
+	DA830_EMA_D_14,
+	DA830_EMA_D_15,
+	DA830_EMA_A_0,
+	DA830_EMA_A_1,
+	DA830_UHPI_HD_10,
+	DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12,
+	DA830_UHPI_HD_13,
+	DA830_UHPI_HD_14,
+	DA830_UHPI_HD_15,
+	DA830_LCD_D_7,
+	DA830_MMCSD_CLK,
+	DA830_LCD_D_10,
+	DA830_LCD_D_11,
+	DA830_LCD_D_12,
+	DA830_LCD_D_13,
+	DA830_LCD_D_14,
+	DA830_LCD_D_15,
+	DA830_UHPI_HCNTL0,
+	DA830_GPIO0_10,
+	DA830_GPIO0_11,
+	DA830_GPIO0_12,
+	DA830_GPIO0_13,
+	DA830_GPIO0_14,
+	DA830_GPIO0_15,
+	DA830_GPIO1_0,
+	DA830_GPIO1_1,
+	DA830_EMA_A_2,
+	DA830_EMA_A_3,
+	DA830_EMA_A_4,
+	DA830_EMA_A_5,
+	DA830_EMA_A_6,
+	DA830_EMA_A_7,
+	DA830_EMA_A_8,
+	DA830_EMA_A_9,
+	DA830_MMCSD_CMD,
+	DA830_LCD_D_6,
+	DA830_LCD_D_3,
+	DA830_LCD_D_2,
+	DA830_LCD_D_1,
+	DA830_LCD_D_0,
+	DA830_LCD_PCLK,
+	DA830_LCD_HSYNC,
+	DA830_UHPI_HCNTL1,
+	DA830_GPIO1_2,
+	DA830_GPIO1_3,
+	DA830_GPIO1_4,
+	DA830_GPIO1_5,
+	DA830_GPIO1_6,
+	DA830_GPIO1_7,
+	DA830_GPIO1_8,
+	DA830_GPIO1_9,
+	DA830_EMA_A_10,
+	DA830_EMA_A_11,
+	DA830_EMA_A_12,
+	DA830_EMA_BA_1,
+	DA830_EMA_BA_0,
+	DA830_EMA_CLK,
+	DA830_EMA_SDCKE,
+	DA830_NEMA_CAS,
+	DA830_LCD_VSYNC,
+	DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	DA830_LCD_D_5,
+	DA830_LCD_D_4,
+	DA830_OBSCLK,
+	DA830_NEMA_CS_4,
+	DA830_UHPI_HHWIL,
+	DA830_AHCLKR2,
+	DA830_GPIO1_10,
+	DA830_GPIO1_11,
+	DA830_GPIO1_12,
+	DA830_GPIO1_13,
+	DA830_GPIO1_14,
+	DA830_GPIO1_15,
+	DA830_GPIO2_0,
+	DA830_GPIO2_1,
+	DA830_NEMA_RAS,
+	DA830_NEMA_WE,
+	DA830_NEMA_CS_0,
+	DA830_NEMA_CS_2,
+	DA830_NEMA_CS_3,
+	DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1,
+	DA830_NEMA_WE_DQM_0,
+	DA830_NEMA_CS_5,
+	DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS,
+	DA830_NUHPI_HCS,
+	DA830_NUHPI_HDS1,
+	DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT,
+	DA830_AXR0_12,
+	DA830_AMUTE2,
+	DA830_AXR0_13,
+	DA830_AXR0_14,
+	DA830_AXR0_15,
+	DA830_GPIO2_2,
+	DA830_GPIO2_3,
+	DA830_GPIO2_4,
+	DA830_GPIO2_5,
+	DA830_GPIO2_6,
+	DA830_GPIO2_7,
+	DA830_GPIO2_8,
+	DA830_GPIO2_9,
+	DA830_EMA_WAIT_0,
+	DA830_NUHPI_HRDY,
+	DA830_GPIO2_10,
+};
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 2bb414b1429..6b9621d8828 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -136,6 +136,47 @@
 #define DM646X_LPSC_TIMER1         35
 #define DM646X_LPSC_ARM_INTC       45
 
+/* PSC0 defines */
+#define DA8XX_LPSC0_TPCC		0
+#define DA8XX_LPSC0_TPTC0		1
+#define DA8XX_LPSC0_TPTC1		2
+#define DA8XX_LPSC0_EMIF25		3
+#define DA8XX_LPSC0_SPI0		4
+#define DA8XX_LPSC0_MMC_SD		5
+#define DA8XX_LPSC0_AINTC		6
+#define DA8XX_LPSC0_ARM_RAM_ROM		7
+#define DA8XX_LPSC0_SECU_MGR		8
+#define DA8XX_LPSC0_UART0		9
+#define DA8XX_LPSC0_SCR0_SS		10
+#define DA8XX_LPSC0_SCR1_SS		11
+#define DA8XX_LPSC0_SCR2_SS		12
+#define DA8XX_LPSC0_DMAX		13
+#define DA8XX_LPSC0_ARM			14
+#define DA8XX_LPSC0_GEM			15
+
+/* PSC1 defines */
+#define DA8XX_LPSC1_USB20		1
+#define DA8XX_LPSC1_USB11		2
+#define DA8XX_LPSC1_GPIO		3
+#define DA8XX_LPSC1_UHPI		4
+#define DA8XX_LPSC1_CPGMAC		5
+#define DA8XX_LPSC1_EMIF3C		6
+#define DA8XX_LPSC1_McASP0		7
+#define DA830_LPSC1_McASP1		8
+#define DA830_LPSC1_McASP2		9
+#define DA8XX_LPSC1_SPI1		10
+#define DA8XX_LPSC1_I2C			11
+#define DA8XX_LPSC1_UART1		12
+#define DA8XX_LPSC1_UART2		13
+#define DA8XX_LPSC1_LCDC		16
+#define DA8XX_LPSC1_PWM			17
+#define DA8XX_LPSC1_ECAP		20
+#define DA830_LPSC1_EQEP		21
+#define DA8XX_LPSC1_SCR_P0_SS		24
+#define DA8XX_LPSC1_SCR_P1_SS		25
+#define DA8XX_LPSC1_CR_P3_SS		26
+#define DA8XX_LPSC1_L3_CBA_RAM		31
+
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, char enable);
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 794fa5cf93c..57e68e610ee 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -18,6 +18,10 @@
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
 
+#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
+#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
+#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
+
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
-- 
cgit v1.2.3


From 8593790d604c29a717d5914159ce78c7bb9899fb Mon Sep 17 00:00:00 2001
From: "Mark A. Greer" <mgreer@mvista.com>
Date: Wed, 3 Jun 2009 18:41:53 -0700
Subject: davinci: da8xx: Add support for DA830/OMAP-L137 EVM board

Add support for the DA830/OMAP-L137 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) and Audio cards
that can be connected which contain various devices.
Support for those devices and ones on the EVM will be
added in subsequent patches.

Additional generalizations for future SoCs in da8xx family done by
Sudhakar Rajashekhara and Sekhar Nori.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/da830_omapl137_defconfig        | 1254 ++++++++++++++++++++++
 arch/arm/mach-davinci/Kconfig                    |    6 +
 arch/arm/mach-davinci/Makefile                   |    1 +
 arch/arm/mach-davinci/board-da830-evm.c          |  127 +++
 arch/arm/mach-davinci/include/mach/debug-macro.S |    7 +
 arch/arm/mach-davinci/include/mach/uncompress.h  |    6 +-
 6 files changed, 1399 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/configs/da830_omapl137_defconfig
 create mode 100644 arch/arm/mach-davinci/board-da830-evm.c

(limited to 'arch')

diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig
new file mode 100644
index 00000000000..7c8e38f5c5a
--- /dev/null
+++ b/arch/arm/configs/da830_omapl137_defconfig
@@ -0,0 +1,1254 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2-davinci1
+# Wed May 13 15:33:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 312228ed848..646c569b75e 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -89,6 +89,12 @@ config MACH_DAVINCI_DM365_EVM
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
 
+config MACH_DAVINCI_DA830_EVM
+	bool "TI DA830/OMAP-L137 Reference Platform"
+	default ARCH_DAVINCI_DA830
+	depends on ARCH_DAVINCI_DA830
+	help
+	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 385638c0a71..d183b11da46 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
new file mode 100644
index 00000000000..0409eb67cfe
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -0,0 +1,127 @@
+/*
+ * TI DA830/OMAP L137 EVM board
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+#define DA830_EVM_PHY_MASK		0x0
+#define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da830_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static __init void da830_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da830_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da830_pinmux_setup(da830_i2c0_pins);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 1;
+
+	ret = da830_pinmux_setup(da830_cpgmac_pins);
+	if (ret)
+		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da830_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	davinci_serial_init(&da830_evm_uart_config);
+	i2c_register_board_info(1, da830_evm_i2c_devices,
+			ARRAY_SIZE(da830_evm_i2c_devices));
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da830_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da830_evm_console_init);
+#endif
+
+static __init void da830_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da830_evm_map_io(void)
+{
+	da830_init();
+}
+
+MACHINE_START(DAVINCI_DA8XX_EVM, "DaVinci DA830/OMAP L137 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da830_evm_map_io,
+	.init_irq	= da830_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da830_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index de3fc2182b4..69837a67d5f 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -24,7 +24,14 @@
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x01000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
+#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
+#error Cannot enable DaVinci and DA8XX platforms concurrently
+#elif defined(CONFIG_MACH_DAVINCI_DA8XX_EVM)
+		orr	\rx, \rx, #0x00d00000	@ physical base address
+		orr	\rx, \rx, #0x0000d000	@ of UART 2
+#else
 		orr	\rx, \rx, #0x00c20000   @ UART 0
+#endif
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 1e27475f9a2..0f1f12b6787 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -21,8 +21,10 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	/* Add logic here for new platforms, using __macine_arch_type */
-	return (u32 *)DAVINCI_UART0_BASE;
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA8XX_EVM)
+		return (u32 *)DA8XX_UART2_BASE;
+	else
+		return (u32 *)DAVINCI_UART0_BASE;
 }
 
 /* PORT_16C550A, in polled non-fifo mode */
-- 
cgit v1.2.3


From af5dbaef76cb01995639cef10ca6f5a2b08207e8 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Wed, 24 Jun 2009 12:22:28 -0400
Subject: davinci: DM365 Updating PINMUX Entries

Patch updates DM365 PINMUX by adding entries for Video, SPI 1 - 4,
PWM 0 - 3.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c            | 51 ++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/mux.h | 58 ++++++++++++++++++++++++++++++++
 2 files changed, 109 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index c52aad30084..e5873bc0a0f 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -533,6 +533,57 @@ MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
 
 MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
 
+MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
+MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
+MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
+MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
+MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
+MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
+MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
+MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
+MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
+
+MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
+MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
+MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
+
+MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
+MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
+
+MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
+MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
+
+MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
+MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
+MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
+
+MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
+MUX_CFG(DM365,	VIN_YIN_EN,	0,   0,     0xfff, 0,	 false)
+
 INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
 INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
 INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index ae4f6dd3623..cce7509ea30 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -224,6 +224,64 @@ enum davinci_dm365_index {
 	/* Keypad */
 	DM365_KEYPAD,
 
+	/* PWM */
+	DM365_PWM0,
+	DM365_PWM0_G23,
+	DM365_PWM1,
+	DM365_PWM1_G25,
+	DM365_PWM2_G87,
+	DM365_PWM2_G88,
+	DM365_PWM2_G89,
+	DM365_PWM2_G90,
+	DM365_PWM3_G80,
+	DM365_PWM3_G81,
+	DM365_PWM3_G85,
+	DM365_PWM3_G86,
+
+	/* SPI1 */
+	DM365_SPI1_SCLK,
+	DM365_SPI1_SDO,
+	DM365_SPI1_SDI,
+	DM365_SPI1_SDENA0,
+	DM365_SPI1_SDENA1,
+
+	/* SPI2 */
+	DM365_SPI2_SCLK,
+	DM365_SPI2_SDO,
+	DM365_SPI2_SDI,
+	DM365_SPI2_SDENA0,
+	DM365_SPI2_SDENA1,
+
+	/* SPI3 */
+	DM365_SPI3_SCLK,
+	DM365_SPI3_SDO,
+	DM365_SPI3_SDI,
+	DM365_SPI3_SDENA0,
+	DM365_SPI3_SDENA1,
+
+	/* SPI4 */
+	DM365_SPI4_SCLK,
+	DM365_SPI4_SDO,
+	DM365_SPI4_SDI,
+	DM365_SPI4_SDENA0,
+	DM365_SPI4_SDENA1,
+
+	/* GPIO */
+	DM365_GPIO20,
+	DM365_GPIO33,
+	DM365_GPIO40,
+
+	/* Video */
+	DM365_VOUT_FIELD,
+	DM365_VOUT_FIELD_G81,
+	DM365_VOUT_HVSYNC,
+	DM365_VOUT_COUTL_EN,
+	DM365_VOUT_COUTH_EN,
+	DM365_VIN_CAM_WEN,
+	DM365_VIN_CAM_VD,
+	DM365_VIN_CAM_HD,
+	DM365_VIN_YIN_EN,
+
 	/* IRQ muxing */
 	DM365_INT_EDMA_CC,
 	DM365_INT_EDMA_TC0_ERR,
-- 
cgit v1.2.3


From 7a36071e7954836ba437987e5ca4ced174462b28 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 25 Jun 2009 17:01:31 -0700
Subject: davinci: dm365 gpio irq support

Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs:

 - Flag DM365 chips as using non-banked GPIO interrupts, using a
   new soc_info field.

 - Replace the gpio_to_irq() mapping logic.  This now uses some
   runtime infrastructure, keyed off that new soc_info field,
   which doesn't handle irq_to_gpio().

 - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC
   still need edge triggering managed by the GPIO controller.

DM365 chips no longer falsely report 104 GPIO IRQs as they boot.

Intelligence about IRQ muxing is missing, so for the moment this
only exposes the first eight DM365 GPIOs, which are never muxed.
The next eight are muxed, half with Ethernet (which uses most of
those pins anyway).

Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also
on DM365 (16 unbanked ones, only 8 made available).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c               |   3 +-
 arch/arm/mach-davinci/gpio.c                | 105 ++++++++++++++++++++++++++--
 arch/arm/mach-davinci/include/mach/common.h |   1 +
 arch/arm/mach-davinci/include/mach/gpio.h   |   8 +--
 4 files changed, 105 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index e5873bc0a0f..f02bce8eeba 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -882,7 +882,8 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.timer_info		= &dm365_timer_info,
 	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
 	.gpio_num		= 104,
-	.gpio_irq		= 44,
+	.gpio_irq		= IRQ_DM365_GPIO0,
+	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
 	.serial_dev		= &dm365_serial_device,
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 1b6532159c5..f6ea9db11f4 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -34,6 +34,7 @@ static DEFINE_SPINLOCK(gpio_lock);
 struct davinci_gpio {
 	struct gpio_chip	chip;
 	struct gpio_controller	*__iomem regs;
+	int			irq_base;
 };
 
 static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
@@ -161,8 +162,7 @@ pure_initcall(davinci_gpio_setup);
  * used as output pins ... which is convenient for testing.
  *
  * NOTE:  The first few GPIOs also have direct INTC hookups in addition
- * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
- * on triggering (e.g. no edge options).  We don't try to use those.
+ * to their GPIOBNK0 irq, with a bit less overhead.
  *
  * All those INTC hookups (direct, plus several IRQ banks) can also
  * serve as EDMA event triggers.
@@ -171,7 +171,7 @@ pure_initcall(davinci_gpio_setup);
 static void gpio_irq_disable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	__raw_writel(mask, &g->clr_falling);
 	__raw_writel(mask, &g->clr_rising);
@@ -180,7 +180,7 @@ static void gpio_irq_disable(unsigned irq)
 static void gpio_irq_enable(unsigned irq)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 	unsigned status = irq_desc[irq].status;
 
 	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
@@ -196,7 +196,7 @@ static void gpio_irq_enable(unsigned irq)
 static int gpio_irq_type(unsigned irq, unsigned trigger)
 {
 	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
-	u32 mask = __gpio_mask(irq_to_gpio(irq));
+	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
@@ -260,6 +260,45 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	/* now it may re-trigger */
 }
 
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+
+	if (d->irq_base >= 0)
+		return d->irq_base + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+	 */
+	if (offset < soc_info->gpio_unbanked)
+		return soc_info->gpio_irq + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger)
+{
+	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	u32 mask = (u32) get_irq_data(irq);
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+
+	return 0;
+}
+
 /*
  * NOTE:  for suspend/resume, probably best to make a platform_device with
  * suspend_late/resume_resume calls hooking into results of the set_wake()
@@ -275,6 +314,7 @@ static int __init davinci_gpio_irq_setup(void)
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct gpio_controller	*__iomem g;
 
 	ngpio = soc_info->gpio_num;
 
@@ -292,12 +332,63 @@ static int __init davinci_gpio_irq_setup(void)
 	}
 	clk_enable(clk);
 
+	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
+	 * IRQs, while the others use banked IRQs, would need some setup
+	 * tweaks to recognize hardware which can do that.
+	 */
+	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+		chips[bank].chip.to_irq = gpio_to_irq_banked;
+		chips[bank].irq_base = soc_info->gpio_unbanked
+			? -EINVAL
+			: (soc_info->intc_irq_num + gpio);
+	}
+
+	/*
+	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * controller only handling trigger modes.  We currently assume no
+	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+	 */
+	if (soc_info->gpio_unbanked) {
+		static struct irq_chip gpio_irqchip_unbanked;
+
+		/* pass "bank 0" GPIO IRQs to AINTC */
+		chips[0].chip.to_irq = gpio_to_irq_unbanked;
+		binten = BIT(0);
+
+		/* AINTC handles mask/unmask; GPIO handles triggering */
+		irq = bank_irq;
+		gpio_irqchip_unbanked = *get_irq_desc_chip(irq_to_desc(irq));
+		gpio_irqchip_unbanked.name = "GPIO-AINTC";
+		gpio_irqchip_unbanked.set_type = gpio_irq_type_unbanked;
+
+		/* default trigger: both edges */
+		g = gpio2controller(0);
+		__raw_writel(~0, &g->set_falling);
+		__raw_writel(~0, &g->set_rising);
+
+		/* set the direct IRQs up to use that irqchip */
+		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+			set_irq_chip(irq, &gpio_irqchip_unbanked);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
+			set_irq_chip_data(irq, g);
+			irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH;
+		}
+
+		goto done;
+	}
+
+	/*
+	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+	 * then chain through our own handler.
+	 */
 	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
 			gpio < ngpio;
 			bank++, bank_irq++) {
-		struct gpio_controller	*__iomem g = gpio2controller(gpio);
 		unsigned		i;
 
+		/* disabled by default, enabled only as needed */
+		g = gpio2controller(gpio);
 		__raw_writel(~0, &g->clr_falling);
 		__raw_writel(~0, &g->clr_rising);
 
@@ -309,6 +400,7 @@ static int __init davinci_gpio_irq_setup(void)
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
 			set_irq_chip_data(irq, g);
+			set_irq_data(irq, (void *) __gpio_mask(gpio));
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
 		}
@@ -316,6 +408,7 @@ static int __init davinci_gpio_irq_setup(void)
 		binten |= BIT(bank);
 	}
 
+done:
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index b21393b24d6..1fd3917cae4 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -63,6 +63,7 @@ struct davinci_soc_info {
 	void __iomem			*gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
+	unsigned			gpio_unbanked;
 	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ae074556831..ebcc29babea 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -142,15 +142,13 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	if (gpio >= DAVINCI_N_GPIO)
-		return -EINVAL;
-	return davinci_soc_info.intc_irq_num + gpio;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned irq)
 {
-	/* caller guarantees gpio_to_irq() succeeded */
-	return irq - davinci_soc_info.intc_irq_num;
+	/* don't support the reverse mapping */
+	return -ENOSYS;
 }
 
 #endif				/* __DAVINCI_GPIO_H */
-- 
cgit v1.2.3


From 25acf553aeed86f93f2cf39227b59fc6eb3e8c78 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Fri, 5 Jun 2009 06:28:08 -0400
Subject: davinci: ASoC: Add the platform devices for ASP

1) Registers the platform devices for ASP on dm355, dm644x and dm646x
   so that the machine driver can probe to get ASP related platform
   data.
2) Move towards definition of the asp clocks using physical name(for
   dm355 and dm644x)
3) Add platform data to board specific files.

Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c     |  7 +++
 arch/arm/mach-davinci/board-dm644x-evm.c    |  5 ++
 arch/arm/mach-davinci/board-dm646x-evm.c    | 33 +++++++++++++
 arch/arm/mach-davinci/dm355.c               | 43 ++++++++++++++++-
 arch/arm/mach-davinci/dm644x.c              | 36 +++++++++++++-
 arch/arm/mach-davinci/dm646x.c              | 74 +++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/asp.h    | 35 +++++++++++++-
 arch/arm/mach-davinci/include/mach/dm355.h  |  5 ++
 arch/arm/mach-davinci/include/mach/dm644x.h |  2 +
 arch/arm/mach-davinci/include/mach/dm646x.h |  3 ++
 10 files changed, 238 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d6ab64ccd49..4ef6dbeccf3 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -117,6 +117,10 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static struct snd_platform_data dm355_evm_snd_data = {
+	.clk_name	= "asp1",
+};
+
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -279,6 +283,9 @@ static __init void dm355_evm_init(void)
 
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
+
+	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
 static __init void dm355_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 56c8cd01de9..d37f5c204b6 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -225,6 +225,10 @@ static struct platform_device ide_dev = {
 	},
 };
 
+static struct snd_platform_data dm644x_evm_snd_data = {
+	.clk_name	= "asp0",
+};
+
 /*----------------------------------------------------------------------*/
 
 /*
@@ -666,6 +670,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 
 	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8657e72debc..0aa18df4110 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -206,6 +206,37 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static u8 dm646x_iis_serializer_direction[] = {
+       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
+};
+
+static u8 dm646x_dit_serializer_direction[] = {
+       TX_MODE,
+};
+
+static struct snd_platform_data dm646x_evm_snd_data[] = {
+	{
+		.clk_name       = "mcasp0",
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0x400,
+		.op_mode        = DAVINCI_MCASP_IIS_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
+		.tdm_slots      = 2,
+		.serial_dir     = dm646x_iis_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+	{
+		.clk_name       = "mcasp1",
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0,
+		.op_mode        = DAVINCI_MCASP_DIT_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
+		.tdm_slots      = 32,
+		.serial_dir     = dm646x_dit_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+};
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -239,6 +270,8 @@ static __init void evm_init(void)
 
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
+	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 48f33e42051..b4d709a8612 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -30,6 +30,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -360,8 +361,8 @@ static struct davinci_clk dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("soc-audio.0", NULL, &asp0_clk),
-	CLK("soc-audio.1", NULL, &asp1_clk),
+	CLK(NULL, "asp0", &asp0_clk),
+	CLK(NULL, "asp1", &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK(NULL, "spi0", &spi0_clk),
@@ -627,6 +628,31 @@ static struct platform_device dm355_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource dm355_asp1_resources[] = {
+	{
+		.start	= DAVINCI_ASP1_BASE,
+		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_TX,
+		.end	= DAVINCI_DMA_ASP1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP1_RX,
+		.end	= DAVINCI_DMA_ASP1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm355_asp1_device = {
+	.name		= "davinci-asp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
+	.resource	= dm355_asp1_resources,
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -735,6 +761,19 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
+{
+	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
+	if (evt_enable & ASP1_TX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+
+	if (evt_enable & ASP1_RX_EVT_EN)
+		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+	dm355_asp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm355_asp1_device);
+}
+
 void __init dm355_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm355);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d20e447a8b4..55317b1cf86 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -27,6 +27,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -303,7 +304,7 @@ struct davinci_clk dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("soc-audio.0", NULL, &asp_clk),
+	CLK(NULL, "asp0", &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -553,6 +554,32 @@ static struct platform_device dm644x_edma_device = {
 	.resource		= edma_resources,
 };
 
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
+static struct resource dm644x_asp_resources[] = {
+	{
+		.start	= DAVINCI_ASP0_BASE,
+		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_TX,
+		.end	= DAVINCI_DMA_ASP0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_RX,
+		.end	= DAVINCI_DMA_ASP0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm644x_asp_device = {
+	.name		= "davinci-asp",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
+	.resource	= dm644x_asp_resources,
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -669,6 +696,13 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.sram_len		= SZ_16K,
 };
 
+void __init dm644x_init_asp(struct snd_platform_data *pdata)
+{
+	davinci_cfg_reg(DM644X_MCBSP);
+	dm644x_asp_device.dev.platform_data = pdata;
+	platform_device_register(&dm644x_asp_device);
+}
+
 void __init dm644x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm644x);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 2c76a4d47bf..199f288e03c 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -27,6 +27,7 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -591,6 +592,66 @@ static struct platform_device dm646x_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource dm646x_mcasp0_resources[] = {
+	{
+		.name	= "mcasp0",
+		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
+		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
+		.flags 	= IORESOURCE_MEM,
+	},
+	/* first TX, then RX */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.end	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource dm646x_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
+		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* DIT mode, only TX event */
+	{
+		.start	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.end	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* DIT mode, dummy entry */
+	{
+		.start	= -1,
+		.end	= -1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm646x_mcasp0_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp0_resources),
+	.resource	= dm646x_mcasp0_resources,
+};
+
+static struct platform_device dm646x_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dm646x_mcasp1_resources),
+	.resource	= dm646x_mcasp1_resources,
+};
+
+static struct platform_device dm646x_dit_device = {
+	.name	= "spdif-dit",
+	.id	= -1,
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -700,6 +761,19 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp0_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp0_device);
+}
+
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
+{
+	dm646x_mcasp1_device.dev.platform_data = pdata;
+	platform_device_register(&dm646x_mcasp1_device);
+	platform_device_register(&dm646x_dit_device);
+}
+
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index e0abc437d79..038ecb7c231 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -5,21 +5,52 @@
 #define __ASM_ARCH_DAVINCI_ASP_H
 
 #include <mach/irqs.h>
+#include <mach/edma.h>
 
-/* Bases of register banks */
+/* Bases of dm644x and dm355 register banks */
 #define DAVINCI_ASP0_BASE	0x01E02000
 #define DAVINCI_ASP1_BASE	0x01E04000
 
-/* EDMA channels */
+/* Bases of dm646x register banks */
+#define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
+#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
+
+/* EDMA channels of dm644x and dm355 */
 #define DAVINCI_DMA_ASP0_TX	2
 #define DAVINCI_DMA_ASP0_RX	3
 #define DAVINCI_DMA_ASP1_TX	8
 #define DAVINCI_DMA_ASP1_RX	9
 
+/* EDMA channels of dm646x */
+#define	DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
+#define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
+#define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
+
 /* Interrupts */
 #define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
 #define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
 
+struct snd_platform_data {
+	char *clk_name;
+	u32 tx_dma_offset;
+	u32 rx_dma_offset;
+	enum dma_event_q eventq_no;	/* event queue number */
+	unsigned int codec_fmt;
+
+	/* McASP specific fields */
+	int tdm_slots;
+	u8 op_mode;
+	u8 num_serializer;
+	u8 *serial_dir;
+};
+
+#define INACTIVE_MODE	0
+#define TX_MODE		1
+#define RX_MODE		2
+
+#define DAVINCI_MCASP_IIS_MODE	0
+#define DAVINCI_MCASP_DIT_MODE	1
+
 #endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
index 54903b72438..03faaef95a9 100644
--- a/arch/arm/mach-davinci/include/mach/dm355.h
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -12,11 +12,16 @@
 #define __ASM_ARCH_DM355_H
 
 #include <mach/hardware.h>
+#include <mach/asp.h>
+
+#define ASP1_TX_EVT_EN	1
+#define ASP1_RX_EVT_EN	2
 
 struct spi_board_info;
 
 void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		struct spi_board_info *info, unsigned len);
+void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
 
 #endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 15d42b92a8c..8b157ceec0c 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -25,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -34,5 +35,6 @@
 #define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 void __init dm644x_init(void);
+void __init dm644x_init_asp(struct snd_platform_data *pdata);
 
 #endif /* __ASM_ARCH_DM644X_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 1fc764c8646..05854846242 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -13,6 +13,7 @@
 
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -22,5 +23,7 @@
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 void __init dm646x_init(void);
+void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
+void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 
 #endif /* __ASM_ARCH_DM646X_H */
-- 
cgit v1.2.3


From 88659988d5b01f83615ece5ad3183ce5672e2a7f Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Mon, 6 Jul 2009 14:39:25 -0700
Subject: davinci: Kconfig: update default config for 2.6.31-rc

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/davinci_all_defconfig | 152 ++++++++++++++-------------------
 1 file changed, 65 insertions(+), 87 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 6eb6d9da0dc..8c669ae94e3 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Tue May 26 07:24:28 2009
+# Linux kernel version: 2.6.31-rc2
+# Mon Jul  6 14:38:31 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -62,8 +60,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +77,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,8 +89,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -106,6 +107,11 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +124,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,13 +151,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,26 +167,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_AINTC=y
+CONFIG_ARCH_DAVINCI_DMx=y
 
 #
 # TI DaVinci Implementations
@@ -191,6 +199,7 @@ CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
+# CONFIG_ARCH_DAVINCI_DA830 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
 
 #
@@ -229,7 +238,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -254,7 +262,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -270,12 +277,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -417,6 +425,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -555,6 +564,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -566,6 +576,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
@@ -611,10 +622,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -639,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -686,6 +692,7 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -755,6 +762,7 @@ CONFIG_KEYBOARD_ATKBD=m
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -762,6 +770,7 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -775,6 +784,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -834,6 +844,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -856,7 +867,6 @@ CONFIG_I2C_DAVINCI=y
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -937,6 +947,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -988,52 +999,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1104,6 +1071,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1145,7 +1117,7 @@ CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
@@ -1162,10 +1134,11 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1268,6 +1241,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
@@ -1287,6 +1261,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_M66592 is not set
@@ -1295,9 +1270,11 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
@@ -1313,7 +1290,7 @@ CONFIG_USB_CDC_COMPOSITE=m
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1330,7 +1307,6 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_DAVINCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
@@ -1342,7 +1318,7 @@ CONFIG_LEDS_CLASS=m
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1388,6 +1364,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1435,14 +1412,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1625,6 +1604,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1656,18 +1636,16 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
-- 
cgit v1.2.3


From 3e25d5f4fd7515a0a1e6b68025c483f53196a98c Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Tue, 7 Jul 2009 19:49:41 +0530
Subject: davinci: dm646x: Add clock info and update mux setup for ATA

This patch adds clock data for IDE and also updates pin mux mask for ATA so as
to disable PCI when ATA is selected.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 199f288e03c..50f01e013aa 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -285,6 +285,13 @@ static struct clk timer2_clk = {
 	.flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
 };
 
+
+static struct clk ide_clk = {
+	.name = "ide",
+	.parent = &pll1_sysclk4,
+	.lpsc = DAVINCI_LPSC_ATA,
+};
+
 static struct clk vpif0_clk = {
 	.name = "vpif0",
 	.parent = &ref_clk,
@@ -336,6 +343,7 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "timer0", &timer0_clk),
 	CLK(NULL, "timer1", &timer1_clk),
 	CLK("watchdog", NULL, &timer2_clk),
+	CLK("palm_bk3710", NULL, &ide_clk),
 	CLK(NULL, "vpif0", &vpif0_clk),
 	CLK(NULL, "vpif1", &vpif1_clk),
 	CLK(NULL, NULL, NULL),
@@ -399,7 +407,7 @@ static struct platform_device dm646x_emac_device = {
  */
 static const struct mux_config dm646x_pins[] = {
 #ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN,		0,   0,     1,	  1,	 true)
+MUX_CFG(DM646X, ATAEN,		0,   0,     5,	  1,	 true)
 
 MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
 
-- 
cgit v1.2.3


From 9eb7115bcc423ae022ebf1844820d58a77c2d435 Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Wed, 24 Jun 2009 10:15:47 +0530
Subject: davinci: Move IO device mapping macros from io.h to hardware.h

This patch takes out IO mapping macros from mach/io.h and puts them in
mach/hardware.h avoiding need to include mach/io.h in various files such as
serial.h, vmalloc.h etc.

The main reason to avoid inclusion of mach/io.h is, when default in/out macros
are overridden by machine specific functions (e.g., in case of PCI I/O), they
result into linker error. An example snippet and error snapshot is listed below.

Following code in mach/io.h:

	#define inl(p)  my_inl()

	static inline unsigned int my_inl(unsigned int addr)
	{
		if (IS_PCI_IO(addr))
			return pci_inl ();
		else
			return le32_to_cpu(__raw_readl(__typesafe_io(addr)));
	}

leads to error:
	LD      arch/arm/boot/compressed/vmlinux
	arch/arm/boot/compressed/misc.o: In function `my_inl':
	misc.c:(.text+0x2744): undefined reference to `pci_inl'
	make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1

This is because mach/io.h gets included in arch/arm/boot/compressed/misc.c
through mach/serial.h but pci.c file, which defines 'pci_inl' doesn't get built
into compressed vmlinux.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/hardware.h | 17 +++++++++++++++++
 arch/arm/mach-davinci/include/mach/io.h       | 23 ++---------------------
 arch/arm/mach-davinci/include/mach/serial.h   |  2 +-
 arch/arm/mach-davinci/include/mach/vmalloc.h  |  2 +-
 4 files changed, 21 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index 48c77934d51..41c89386e39 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -24,4 +24,21 @@
 /* System control register offsets */
 #define DM64XX_VDD3P3V_PWDN	0x48
 
+/*
+ * I/O mapping
+ */
+#define IO_PHYS				0x01c00000
+#define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE				0x00400000
+#define IO_VIRT				(IO_PHYS + IO_OFFSET)
+#define io_v2p(va)			((va) - IO_OFFSET)
+#define __IO_ADDRESS(x)			((x) + IO_OFFSET)
+#define IO_ADDRESS(pa)			IOMEM(__IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                	x
+#else
+#define IOMEM(x)                	((void __force __iomem *)(x))
+#endif
+
 #endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index 2479785405a..62b0a90309a 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -13,18 +13,6 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-#define IO_PHYS		0x01c00000
-#define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
-#define IO_SIZE		0x00400000
-#define IO_VIRT		(IO_PHYS + IO_OFFSET)
-#define io_v2p(va)	((va) - IO_OFFSET)
-#define __IO_ADDRESS(x)	((x) + IO_OFFSET)
-
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many
  * drivers out there that might just work if we fake them...
@@ -33,19 +21,12 @@
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
-#define IO_ADDRESS(pa)          IOMEM(__IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)                x
-#else
-#define IOMEM(x)                ((void __force __iomem *)(x))
-
+#ifndef __ASSEMBLER__
 #define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
 #define __arch_iounmap(v)	davinci_iounmap(v)
 
 void __iomem *davinci_ioremap(unsigned long phys, size_t size,
 			      unsigned int type);
 void davinci_iounmap(volatile void __iomem *addr);
-
-#endif /* __ASSEMBLER__ */
+#endif
 #endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index 57e68e610ee..a584697a9e7 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 #define DAVINCI_MAX_NR_UARTS	3
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
index ad51625b660..d49646a8e20 100644
--- a/arch/arm/mach-davinci/include/mach/vmalloc.h
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -8,7 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
 #define VMALLOC_END	  (IO_VIRT - (2<<20))
-- 
cgit v1.2.3


From baf09a4cd029c10fd46ef3d1505e2fe8cddcb48e Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 8 Jul 2009 08:32:27 -0700
Subject: davinci: da830: updates for mach-type name change

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c          | 2 +-
 arch/arm/mach-davinci/include/mach/debug-macro.S | 2 +-
 arch/arm/mach-davinci/include/mach/uncompress.h  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 0409eb67cfe..9185a706d14 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -116,7 +116,7 @@ static void __init da830_evm_map_io(void)
 	da830_init();
 }
 
-MACHINE_START(DAVINCI_DA8XX_EVM, "DaVinci DA830/OMAP L137 EVM")
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 69837a67d5f..9d16277b233 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -26,7 +26,7 @@
 		movne	\rx, #0xfe000000	@ virtual base
 #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
 #error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_MACH_DAVINCI_DA8XX_EVM)
+#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM)
 		orr	\rx, \rx, #0x00d00000	@ physical base address
 		orr	\rx, \rx, #0x0000d000	@ of UART 2
 #else
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 0f1f12b6787..46a0c3171e3 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -21,7 +21,7 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA8XX_EVM)
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM)
 		return (u32 *)DA8XX_UART2_BASE;
 	else
 		return (u32 *)DAVINCI_UART0_BASE;
-- 
cgit v1.2.3


From 6077d265324f13a4b7db30eb70cabed07fd58936 Mon Sep 17 00:00:00 2001
From: Sekhar Nori <nsekhar@ti.com>
Date: Thu, 9 Jul 2009 20:26:38 +0530
Subject: davinci: make arch_idle and arch_reset as inline functions

Make arch_idle and arch_reset inline as inline function.

Not having them inline leads to a warning of this sort when only
one of these functions is used:

arch/arm/mach-davinci/include/mach/system.h:24: warning: 'arch_reset' \
defined but not used

boot, re-boot tested on OMAP-L138 EVM

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/system.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index b7e7036674f..8e4f10fe126 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -16,12 +16,12 @@
 
 extern void davinci_watchdog_reset(void);
 
-static void arch_idle(void)
+static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static void arch_reset(char mode, const char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	davinci_watchdog_reset();
 }
-- 
cgit v1.2.3


From 1c92a554fcad141f8c73eecdb1cc5ac0527a5c15 Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Thu, 9 Jul 2009 19:43:20 +0530
Subject: davinci: dm646x: Add IDE setup

This patch adds platform data and init function for IDE which could be called
from board specific file to register IDE device.

Note that for 594MHz device the transfer mode is limited to UDMA4 since ideclk
rate is less than 100 MHz, which forces udma_mask in palm_bk3710.c to UDMA4,
while for 729MHz device, it is UDMA5.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm646x.c              | 32 +++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/dm646x.h |  3 +++
 2 files changed, 35 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 50f01e013aa..3516f7699db 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -600,6 +600,32 @@ static struct platform_device dm646x_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource ide_resources[] = {
+	{
+		.start          = DM646X_ATA_REG_BASE,
+		.end            = DM646X_ATA_REG_BASE + 0x7ff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = IRQ_DM646X_IDE,
+		.end            = IRQ_DM646X_IDE,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+	.name           = "palm_bk3710",
+	.id             = -1,
+	.resource       = ide_resources,
+	.num_resources  = ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
 static struct resource dm646x_mcasp0_resources[] = {
 	{
 		.name	= "mcasp0",
@@ -769,6 +795,12 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm646x_init_ide()
+{
+	davinci_cfg_reg(DM646X_ATAEN);
+	platform_device_register(&ide_dev);
+}
+
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
 {
 	dm646x_mcasp0_device.dev.platform_data = pdata;
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 05854846242..feb1e02cdbd 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -22,7 +22,10 @@
 #define DM646X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+#define DM646X_ATA_REG_BASE		(0x01C66000)
+
 void __init dm646x_init(void);
+void __init dm646x_init_ide(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 
-- 
cgit v1.2.3


From bea238f65c81742a03662e4664d88a9b4de5ea83 Mon Sep 17 00:00:00 2001
From: "Rajashekhara, Sudhakar" <sudhakar.raj@ti.com>
Date: Fri, 10 Jul 2009 02:08:31 -0400
Subject: davinci: Move the da830/omap-l137 #defines to header file

With the introduction of TI da850/omap-l138, some of the macros
defined for da830/omap-l137 will be needed in da850 source file.
So, move the common macros to da8xx.h header file.

Also, modify the macro names from DA830_... to DA8XX_.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/da830.c              | 22 +++++++---------------
 arch/arm/mach-davinci/include/mach/da8xx.h |  8 ++++++++
 2 files changed, 15 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index ab4242869b6..999f69c9372 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -27,14 +27,6 @@
 #include "clock.h"
 #include "mux.h"
 
-#define DA830_PSC0_BASE		0x01c10000
-#define DA830_PLL0_BASE		0x01c11000
-#define DA830_JTAG_ID_REG	0x01c14018
-#define DA830_TIMER64P0_BASE	0x01c20000
-#define DA830_TIMER64P1_BASE	0x01c21000
-#define DA830_GPIO_BASE		0x01e26000
-#define DA830_PSC1_BASE		0x01e27000
-
 /* Offsets of the 8 compare registers on the da830 */
 #define DA830_CMP12_0		0x60
 #define DA830_CMP12_1		0x64
@@ -49,7 +41,7 @@
 
 static struct pll_data pll0_data = {
 	.num		= 1,
-	.phys_base	= DA830_PLL0_BASE,
+	.phys_base	= DA8XX_PLL0_BASE,
 	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
 };
 
@@ -1174,8 +1166,8 @@ static struct map_desc da830_io_desc[] = {
 };
 
 static void __iomem *da830_psc_bases[] = {
-	IO_ADDRESS(DA830_PSC0_BASE),
-	IO_ADDRESS(DA830_PSC1_BASE),
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
 };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
@@ -1191,14 +1183,14 @@ static struct davinci_id da830_ids[] = {
 
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
-		.base		= IO_ADDRESS(DA830_TIMER64P0_BASE),
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
 		.bottom_irq	= IRQ_DA8XX_TINT12_0,
 		.top_irq	= IRQ_DA8XX_TINT34_0,
 		.cmp_off	= DA830_CMP12_0,
 		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
 	},
 	{
-		.base		= IO_ADDRESS(DA830_TIMER64P1_BASE),
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
 		.bottom_irq	= IRQ_DA8XX_TINT12_1,
 		.top_irq	= IRQ_DA8XX_TINT34_1,
 		.cmp_off	= DA830_CMP12_0,
@@ -1220,7 +1212,7 @@ static struct davinci_timer_info da830_timer_info = {
 static struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_base		= IO_ADDRESS(DA830_JTAG_ID_REG),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
 	.ids			= da830_ids,
 	.ids_num		= ARRAY_SIZE(da830_ids),
 	.cpu_clks		= da830_clks,
@@ -1234,7 +1226,7 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_base		= IO_ADDRESS(DA830_GPIO_BASE),
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
 	.gpio_num		= 128,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 084db271c7c..65b42431dde 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -29,6 +29,14 @@
 
 #define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
 
+#define DA8XX_PSC0_BASE		0x01c10000
+#define DA8XX_PLL0_BASE		0x01c11000
+#define DA8XX_JTAG_ID_REG	0x01c14018
+#define DA8XX_TIMER64P0_BASE	0x01c20000
+#define DA8XX_TIMER64P1_BASE	0x01c21000
+#define DA8XX_GPIO_BASE		0x01e26000
+#define DA8XX_PSC1_BASE		0x01e27000
+
 void __init da830_init(void);
 
 int da8xx_register_edma(void);
-- 
cgit v1.2.3


From 2259bbd460c5c15567e2e311d0ab0fe763b40031 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Fri, 10 Jul 2009 06:28:52 -0400
Subject: davinci: Pass proper EDMA CC interrupt number for DA830/OMAP-L137

In EDMA resource structure, instead of passing EDMA CC
interrupt, EDMA TC error interrupt number is being passed.

Before the patch:
	root@arago:~# cat /proc/interrupts
	           CPU0
	 12:          0     cp_intc  edma_error
	 13:          0     cp_intc  edma
	Err:

After the patch:
	root@arago:~# cat /proc/interrupts
	           CPU0
	 11:          0     cp_intc  edma
	 12:          0     cp_intc  edma_error
	Err:

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/devices-da8xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index c367055ae9b..11c0971e13a 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -133,7 +133,7 @@ static struct resource da8xx_edma_resources[] = {
 	},
 	{
 		.name	= "edma0",
-		.start	= IRQ_DA8XX_TCERRINT0,
+		.start	= IRQ_DA8XX_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-- 
cgit v1.2.3


From c96b56c53fb76c540a1a8103c7594859db4351dd Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 16 Jul 2009 05:45:32 -0400
Subject: davinci: Rearrange the da830/omap-l137 macros and functions

Rearrange the PINMUX macros and pinmux_setup function which
are common between da830/omap-l137 and da850/omap-l138.

Also, replace the da830 string in function names to da8xx.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c    |  4 ++--
 arch/arm/mach-davinci/da830.c              | 35 ------------------------------
 arch/arm/mach-davinci/include/mach/da8xx.h | 23 +++++++++++++++++++-
 arch/arm/mach-davinci/mux.c                | 14 ++++++++++++
 4 files changed, 38 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 9185a706d14..90256693b8d 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -61,7 +61,7 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
 				ret);
 
-	ret = da830_pinmux_setup(da830_i2c0_pins);
+	ret = da8xx_pinmux_setup(da830_i2c0_pins);
 	if (ret)
 		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
 				ret);
@@ -75,7 +75,7 @@ static __init void da830_evm_init(void)
 	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
 
-	ret = da830_pinmux_setup(da830_cpgmac_pins);
+	ret = da8xx_pinmux_setup(da830_cpgmac_pins);
 	if (ret)
 		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
 				ret);
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 999f69c9372..3a9b6346c31 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -428,27 +428,6 @@ static struct davinci_clk da830_clks[] = {
 	CLK(NULL,		NULL,		NULL),
 };
 
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define PINMUX5			0x14
-#define PINMUX6			0x18
-#define PINMUX7			0x1c
-#define PINMUX8			0x20
-#define PINMUX9			0x24
-#define PINMUX10		0x28
-#define PINMUX11		0x2c
-#define PINMUX12		0x30
-#define PINMUX13		0x34
-#define PINMUX14		0x38
-#define PINMUX15		0x3c
-#define PINMUX16		0x40
-#define PINMUX17		0x44
-#define PINMUX18		0x48
-#define PINMUX19		0x4c
-
 /*
  * Device specific mux setup
  *
@@ -1036,20 +1015,6 @@ const short da830_eqep1_pins[] __initdata = {
 	-1
 };
 
-int da830_pinmux_setup(const short pins[])
-{
-	int i, error = -EINVAL;
-
-	if (pins)
-		for (i = 0; pins[i] >= 0; i++) {
-			error = davinci_cfg_reg(pins[i]);
-			if (error)
-				break;
-		}
-
-	return error;
-}
-
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 65b42431dde..8c8dc135472 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -37,6 +37,27 @@
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
 
+#define PINMUX0			0x00
+#define PINMUX1			0x04
+#define PINMUX2			0x08
+#define PINMUX3			0x0c
+#define PINMUX4			0x10
+#define PINMUX5			0x14
+#define PINMUX6			0x18
+#define PINMUX7			0x1c
+#define PINMUX8			0x20
+#define PINMUX9			0x24
+#define PINMUX10		0x28
+#define PINMUX11		0x2c
+#define PINMUX12		0x30
+#define PINMUX13		0x34
+#define PINMUX14		0x38
+#define PINMUX15		0x3c
+#define PINMUX16		0x40
+#define PINMUX17		0x44
+#define PINMUX18		0x48
+#define PINMUX19		0x4c
+
 void __init da830_init(void);
 
 int da8xx_register_edma(void);
@@ -72,6 +93,6 @@ extern const short da830_ecap2_pins[];
 extern const short da830_eqep0_pins[];
 extern const short da830_eqep1_pins[];
 
-int da830_pinmux_setup(const short pins[]);
+int da8xx_pinmux_setup(const short pins[]);
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index d310f579aa8..898905e4894 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -91,3 +91,17 @@ int __init_or_module davinci_cfg_reg(const unsigned long index)
 	return 0;
 }
 EXPORT_SYMBOL(davinci_cfg_reg);
+
+int da8xx_pinmux_setup(const short pins[])
+{
+	int i, error = -EINVAL;
+
+	if (pins)
+		for (i = 0; pins[i] >= 0; i++) {
+			error = davinci_cfg_reg(pins[i]);
+			if (error)
+				break;
+		}
+
+	return error;
+}
-- 
cgit v1.2.3


From 295594e9cf6ae2efd73371777aa8feba0f87f42f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Tue, 25 Aug 2009 13:44:44 -0700
Subject: x86: Fix vSMP boot crash

2.6.31-rc7 does not boot on vSMP systems:

[    8.501108] CPU31: Thermal monitoring enabled (TM1)
[    8.501127] CPU 31 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[    8.650254] CPU31: Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz stepping 04
[    8.710324] Brought up 32 CPUs
[    8.713916] Total of 32 processors activated (162314.96 BogoMIPS).
[    8.721489] ERROR: parent span is not a superset of domain->span
[    8.727686] ERROR: domain->groups does not contain CPU0
[    8.733091] ERROR: groups don't span domain->span
[    8.737975] ERROR: domain->cpu_power not set
[    8.742416]

Ravikiran Thirumalai bisected it to:

| commit 2759c3287de27266e06f1f4e82cbd2d65f6a044c
| x86: don't call read_apic_id if !cpu_has_apic

The problem is that on vSMP systems the CPUID derived
initial-APICIDs are overlapping - so we need to fall
back on hard_smp_processor_id() which reads the local
APIC.

Both come from the hardware (influenced by firmware
though) so it's a tough call which one to trust.

Doing the quirk expresses the vSMP property properly
and also does not affect other systems, so we go for
this solution instead of a revert.

Reported-and-Tested-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shai Fultheim <shai@scalex86.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4A944D3C.5030100@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/probe_64.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880f9b8..fcec2f1d34a 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -44,6 +44,11 @@ static struct apic *apic_probe[] __initdata = {
 	NULL,
 };
 
+static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
+{
+	return hard_smp_processor_id() >> index_msb;
+}
+
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
@@ -69,6 +74,11 @@ void __init default_setup_apic_routing(void)
 		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 
+	if (is_vsmp_box()) {
+		/* need to update phys_pkg_id */
+		apic->phys_pkg_id = apicid_phys_pkg_id;
+	}
+
 	/*
 	 * Now that apic routing model is selected, configure the
 	 * fault handling for intr remapping.
-- 
cgit v1.2.3


From efd911814e303e00e6ed44e747b113a8644efede Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Thu, 16 Jul 2009 19:58:53 +0400
Subject: davinci: DM646x: pass correct MUSB IRQs

DM646x has MUSB connected to IRQs 13 and 14 (unlike IRQ12 on other platforms),
so pass the correct IRQ resources with the platform device.

Signed-off-by: Dmitry Krivoschekov <dkrivoschekov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/usb.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index abedb633718..06f55931620 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -13,6 +13,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
 
 #define DAVINCI_USB_OTG_BASE 0x01C64000
 
@@ -64,6 +65,10 @@ static struct resource usb_resources[] = {
 		.start          = IRQ_USBINT,
 		.flags          = IORESOURCE_IRQ,
 	},
+	{
+		/* placeholder for the dedicated CPPI IRQ */
+		.flags          = IORESOURCE_IRQ,
+	},
 };
 
 static u64 usb_dmamask = DMA_BIT_MASK(32);
@@ -84,6 +89,14 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 {
 	usb_data.power = mA / 2;
 	usb_data.potpgt = potpgt_msec / 2;
+
+	if (cpu_is_davinci_dm646x()) {
+		/* Override the defaults as DM6467 uses different IRQs. */
+		usb_dev.resource[1].start = IRQ_DM646X_USBINT;
+		usb_dev.resource[2].start = IRQ_DM646X_USBDMAINT;
+	} else	/* other devices don't have dedicated CPPI IRQ */
+		usb_dev.num_resources = 2;
+
 	platform_device_register(&usb_dev);
 }
 
-- 
cgit v1.2.3


From e1a8d7e2ea7c971f750b1adf0e98c3c8ed002623 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 16 Jul 2009 06:41:54 -0400
Subject: davinci: Add base DA850/OMAP-L138 SoC support

The DA850/OMAP-L138 is a new SoC from TI in the same family as
DA830/OMAP-L137.

Major changes include better support for power management,
support for SATA devices and McBSP (same IP as DM644x).

DA850/OMAP-L138 documents are available at
http://focus.ti.com/docs/prod/folders/print/omap-l138.html.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/Kconfig                |   5 +
 arch/arm/mach-davinci/Makefile               |   1 +
 arch/arm/mach-davinci/da850.c                | 600 +++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/cputype.h |   8 +
 arch/arm/mach-davinci/include/mach/da8xx.h   |   7 +
 arch/arm/mach-davinci/include/mach/irqs.h    |  63 ++-
 arch/arm/mach-davinci/include/mach/mux.h     |  28 ++
 arch/arm/mach-davinci/include/mach/psc.h     |   3 +
 8 files changed, 712 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-davinci/da850.c

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 646c569b75e..1ee438ea979 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -33,6 +33,11 @@ config ARCH_DAVINCI_DA830
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 
+config ARCH_DAVINCI_DA850
+	bool "DA850/OMAP-L138 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
 config ARCH_DAVINCI_DA8XX
 	bool
 
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index d183b11da46..5f8a661c35b 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
new file mode 100644
index 00000000000..332cf7fadb1
--- /dev/null
+++ b/arch/arm/mach-davinci/da850.c
@@ -0,0 +1,600 @@
+/*
+ * TI DA850/OMAP-L138 chip specific setup
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/da830.c
+ * Original Copyrights follow:
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/clock.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/da8xx.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DA850_PLL1_BASE		0x01e1a000
+#define DA850_TIMER64P2_BASE	0x01f0c000
+#define DA850_TIMER64P3_BASE	0x01f0d000
+
+#define DA850_REF_FREQ		24000000
+
+static struct pll_data pll0_data = {
+	.num		= 1,
+	.phys_base	= DA8XX_PLL0_BASE,
+	.flags		= PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct clk ref_clk = {
+	.name		= "ref_clk",
+	.rate		= DA850_REF_FREQ,
+};
+
+static struct clk pll0_clk = {
+	.name		= "pll0",
+	.parent		= &ref_clk,
+	.pll_data	= &pll0_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll0_aux_clk = {
+	.name		= "pll0_aux_clk",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll0_sysclk2 = {
+	.name		= "pll0_sysclk2",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll0_sysclk3 = {
+	.name		= "pll0_sysclk3",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll0_sysclk4 = {
+	.name		= "pll0_sysclk4",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll0_sysclk5 = {
+	.name		= "pll0_sysclk5",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll0_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll0_sysclk7 = {
+	.name		= "pll0_sysclk7",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct pll_data pll1_data = {
+	.num		= 2,
+	.phys_base	= DA850_PLL1_BASE,
+	.flags		= PLL_HAS_POSTDIV,
+};
+
+static struct clk pll1_clk = {
+	.name		= "pll1",
+	.parent		= &ref_clk,
+	.pll_data	= &pll1_data,
+	.flags		= CLK_PLL,
+};
+
+static struct clk pll1_aux_clk = {
+	.name		= "pll1_aux_clk",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk2 = {
+	.name		= "pll1_sysclk2",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+	.name		= "pll1_sysclk3",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+	.name		= "pll1_sysclk4",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+	.name		= "pll1_sysclk5",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+	.name		= "pll0_sysclk6",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV6,
+};
+
+static struct clk pll1_sysclk7 = {
+	.name		= "pll1_sysclk7",
+	.parent		= &pll1_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV7,
+};
+
+static struct clk i2c0_clk = {
+	.name		= "i2c0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_0_clk = {
+	.name		= "timer0",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk timerp64_1_clk = {
+	.name		= "timer1",
+	.parent		= &pll0_aux_clk,
+};
+
+static struct clk arm_rom_clk = {
+	.name		= "arm_rom",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_ARM_RAM_ROM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc0_clk = {
+	.name		= "tpcc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPCC,
+	.flags		= ALWAYS_ENABLED | CLK_PSC,
+};
+
+static struct clk tptc0_clk = {
+	.name		= "tptc0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC0,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tptc1_clk = {
+	.name		= "tptc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_TPTC1,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk tpcc1_clk = {
+	.name		= "tpcc1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPCC1,
+	.flags		= CLK_PSC | ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk tptc2_clk = {
+	.name		= "tptc2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_TPTC2,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart0_clk = {
+	.name		= "uart0",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_UART0,
+};
+
+static struct clk uart1_clk = {
+	.name		= "uart1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART1,
+	.psc_ctlr	= 1,
+};
+
+static struct clk uart2_clk = {
+	.name		= "uart2",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_UART2,
+	.psc_ctlr	= 1,
+};
+
+static struct clk aintc_clk = {
+	.name		= "aintc",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC0_AINTC,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk gpio_clk = {
+	.name		= "gpio",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_GPIO,
+	.psc_ctlr	= 1,
+};
+
+static struct clk i2c1_clk = {
+	.name		= "i2c1",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_I2C,
+	.psc_ctlr	= 1,
+};
+
+static struct clk emif3_clk = {
+	.name		= "emif3",
+	.parent		= &pll0_sysclk5,
+	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.flags		= ALWAYS_ENABLED,
+	.psc_ctlr	= 1,
+};
+
+static struct clk arm_clk = {
+	.name		= "arm",
+	.parent		= &pll0_sysclk6,
+	.lpsc		= DA8XX_LPSC0_ARM,
+	.flags		= ALWAYS_ENABLED,
+};
+
+static struct clk rmii_clk = {
+	.name		= "rmii",
+	.parent		= &pll0_sysclk7,
+};
+
+static struct davinci_clk da850_clks[] = {
+	CLK(NULL,		"ref",		&ref_clk),
+	CLK(NULL,		"pll0",		&pll0_clk),
+	CLK(NULL,		"pll0_aux",	&pll0_aux_clk),
+	CLK(NULL,		"pll0_sysclk2",	&pll0_sysclk2),
+	CLK(NULL,		"pll0_sysclk3",	&pll0_sysclk3),
+	CLK(NULL,		"pll0_sysclk4",	&pll0_sysclk4),
+	CLK(NULL,		"pll0_sysclk5",	&pll0_sysclk5),
+	CLK(NULL,		"pll0_sysclk6",	&pll0_sysclk6),
+	CLK(NULL,		"pll0_sysclk7",	&pll0_sysclk7),
+	CLK(NULL,		"pll1",		&pll1_clk),
+	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
+	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
+	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
+	CLK(NULL,		"pll1_sysclk4",	&pll1_sysclk4),
+	CLK(NULL,		"pll1_sysclk5",	&pll1_sysclk5),
+	CLK(NULL,		"pll1_sysclk6",	&pll1_sysclk6),
+	CLK(NULL,		"pll1_sysclk7",	&pll1_sysclk7),
+	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
+	CLK(NULL,		"timer0",	&timerp64_0_clk),
+	CLK("watchdog",		NULL,		&timerp64_1_clk),
+	CLK(NULL,		"arm_rom",	&arm_rom_clk),
+	CLK(NULL,		"tpcc0",	&tpcc0_clk),
+	CLK(NULL,		"tptc0",	&tptc0_clk),
+	CLK(NULL,		"tptc1",	&tptc1_clk),
+	CLK(NULL,		"tpcc1",	&tpcc1_clk),
+	CLK(NULL,		"tptc2",	&tptc2_clk),
+	CLK(NULL,		"uart0",	&uart0_clk),
+	CLK(NULL,		"uart1",	&uart1_clk),
+	CLK(NULL,		"uart2",	&uart2_clk),
+	CLK(NULL,		"aintc",	&aintc_clk),
+	CLK(NULL,		"gpio",		&gpio_clk),
+	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
+	CLK(NULL,		"emif3",	&emif3_clk),
+	CLK(NULL,		"arm",		&arm_clk),
+	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK(NULL,		NULL,		NULL),
+};
+
+/*
+ * Device specific mux setup
+ *
+ *		soc	description	mux	mode	mode	mux	dbg
+ *					reg	offset	mask	mode
+ */
+static const struct mux_config da850_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	/* UART0 function */
+	MUX_CFG(DA850, NUART0_CTS,	3,	24,	15,	2,	false)
+	MUX_CFG(DA850, NUART0_RTS,	3,	28,	15,	2,	false)
+	MUX_CFG(DA850, UART0_RXD,	3,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART0_TXD,	3,	20,	15,	2,	false)
+	/* UART1 function */
+	MUX_CFG(DA850, UART1_RXD,	4,	24,	15,	2,	false)
+	MUX_CFG(DA850, UART1_TXD,	4,	28,	15,	2,	false)
+	/* UART2 function */
+	MUX_CFG(DA850, UART2_RXD,	4,	16,	15,	2,	false)
+	MUX_CFG(DA850, UART2_TXD,	4,	20,	15,	2,	false)
+	/* I2C1 function */
+	MUX_CFG(DA850, I2C1_SCL,	4,	16,	15,	4,	false)
+	MUX_CFG(DA850, I2C1_SDA,	4,	20,	15,	4,	false)
+	/* I2C0 function */
+	MUX_CFG(DA850, I2C0_SDA,	4,	12,	15,	2,	false)
+	MUX_CFG(DA850, I2C0_SCL,	4,	8,	15,	2,	false)
+#endif
+};
+
+const short da850_uart0_pins[] __initdata = {
+	DA850_NUART0_CTS, DA850_NUART0_RTS, DA850_UART0_RXD, DA850_UART0_TXD,
+	-1
+};
+
+const short da850_uart1_pins[] __initdata = {
+	DA850_UART1_RXD, DA850_UART1_TXD,
+	-1
+};
+
+const short da850_uart2_pins[] __initdata = {
+	DA850_UART2_RXD, DA850_UART2_TXD,
+	-1
+};
+
+const short da850_i2c0_pins[] __initdata = {
+	DA850_I2C0_SDA, DA850_I2C0_SCL,
+	-1
+};
+
+const short da850_i2c1_pins[] __initdata = {
+	DA850_I2C1_SCL, DA850_I2C1_SDA,
+	-1
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
+	[IRQ_DA8XX_COMMTX]		= 7,
+	[IRQ_DA8XX_COMMRX]		= 7,
+	[IRQ_DA8XX_NINT]		= 7,
+	[IRQ_DA8XX_EVTOUT0]		= 7,
+	[IRQ_DA8XX_EVTOUT1]		= 7,
+	[IRQ_DA8XX_EVTOUT2]		= 7,
+	[IRQ_DA8XX_EVTOUT3]		= 7,
+	[IRQ_DA8XX_EVTOUT4]		= 7,
+	[IRQ_DA8XX_EVTOUT5]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT6]		= 7,
+	[IRQ_DA8XX_EVTOUT7]		= 7,
+	[IRQ_DA8XX_CCINT0]		= 7,
+	[IRQ_DA8XX_CCERRINT]		= 7,
+	[IRQ_DA8XX_TCERRINT0]		= 7,
+	[IRQ_DA8XX_AEMIFINT]		= 7,
+	[IRQ_DA8XX_I2CINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT0]		= 7,
+	[IRQ_DA8XX_MMCSDINT1]		= 7,
+	[IRQ_DA8XX_ALLINT0]		= 7,
+	[IRQ_DA8XX_RTC]			= 7,
+	[IRQ_DA8XX_SPINT0]		= 7,
+	[IRQ_DA8XX_TINT12_0]		= 7,
+	[IRQ_DA8XX_TINT34_0]		= 7,
+	[IRQ_DA8XX_TINT12_1]		= 7,
+	[IRQ_DA8XX_TINT34_1]		= 7,
+	[IRQ_DA8XX_UARTINT0]		= 7,
+	[IRQ_DA8XX_KEYMGRINT]		= 7,
+	[IRQ_DA8XX_SECINT]		= 7,
+	[IRQ_DA8XX_SECKEYERR]		= 7,
+	[IRQ_DA850_MPUADDRERR0]		= 7,
+	[IRQ_DA850_MPUPROTERR0]		= 7,
+	[IRQ_DA850_IOPUADDRERR0]	= 7,
+	[IRQ_DA850_IOPUPROTERR0]	= 7,
+	[IRQ_DA850_IOPUADDRERR1]	= 7,
+	[IRQ_DA850_IOPUPROTERR1]	= 7,
+	[IRQ_DA850_IOPUADDRERR2]	= 7,
+	[IRQ_DA850_IOPUPROTERR2]	= 7,
+	[IRQ_DA850_BOOTCFG_ADDR_ERR]	= 7,
+	[IRQ_DA850_BOOTCFG_PROT_ERR]	= 7,
+	[IRQ_DA850_MPUADDRERR1]		= 7,
+	[IRQ_DA850_MPUPROTERR1]		= 7,
+	[IRQ_DA850_IOPUADDRERR3]	= 7,
+	[IRQ_DA850_IOPUPROTERR3]	= 7,
+	[IRQ_DA850_IOPUADDRERR4]	= 7,
+	[IRQ_DA850_IOPUPROTERR4]	= 7,
+	[IRQ_DA850_IOPUADDRERR5]	= 7,
+	[IRQ_DA850_IOPUPROTERR5]	= 7,
+	[IRQ_DA850_MIOPU_BOOTCFG_ERR]	= 7,
+	[IRQ_DA8XX_CHIPINT0]		= 7,
+	[IRQ_DA8XX_CHIPINT1]		= 7,
+	[IRQ_DA8XX_CHIPINT2]		= 7,
+	[IRQ_DA8XX_CHIPINT3]		= 7,
+	[IRQ_DA8XX_TCERRINT1]		= 7,
+	[IRQ_DA8XX_C0_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C0_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C0_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_THRESH_PULSE]	= 7,
+	[IRQ_DA8XX_C1_RX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_TX_PULSE]		= 7,
+	[IRQ_DA8XX_C1_MISC_PULSE]	= 7,
+	[IRQ_DA8XX_MEMERR]		= 7,
+	[IRQ_DA8XX_GPIO0]		= 7,
+	[IRQ_DA8XX_GPIO1]		= 7,
+	[IRQ_DA8XX_GPIO2]		= 7,
+	[IRQ_DA8XX_GPIO3]		= 7,
+	[IRQ_DA8XX_GPIO4]		= 7,
+	[IRQ_DA8XX_GPIO5]		= 7,
+	[IRQ_DA8XX_GPIO6]		= 7,
+	[IRQ_DA8XX_GPIO7]		= 7,
+	[IRQ_DA8XX_GPIO8]		= 7,
+	[IRQ_DA8XX_I2CINT1]		= 7,
+	[IRQ_DA8XX_LCDINT]		= 7,
+	[IRQ_DA8XX_UARTINT1]		= 7,
+	[IRQ_DA8XX_MCASPINT]		= 7,
+	[IRQ_DA8XX_ALLINT1]		= 7,
+	[IRQ_DA8XX_SPINT1]		= 7,
+	[IRQ_DA8XX_UHPI_INT1]		= 7,
+	[IRQ_DA8XX_USB_INT]		= 7,
+	[IRQ_DA8XX_IRQN]		= 7,
+	[IRQ_DA8XX_RWAKEUP]		= 7,
+	[IRQ_DA8XX_UARTINT2]		= 7,
+	[IRQ_DA8XX_DFTSSINT]		= 7,
+	[IRQ_DA8XX_EHRPWM0]		= 7,
+	[IRQ_DA8XX_EHRPWM0TZ]		= 7,
+	[IRQ_DA8XX_EHRPWM1]		= 7,
+	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
+	[IRQ_DA850_SATAINT]		= 7,
+	[IRQ_DA850_TINT12_2]		= 7,
+	[IRQ_DA850_TINT34_2]		= 7,
+	[IRQ_DA850_TINTALL_2]		= 7,
+	[IRQ_DA8XX_ECAP0]		= 7,
+	[IRQ_DA8XX_ECAP1]		= 7,
+	[IRQ_DA8XX_ECAP2]		= 7,
+	[IRQ_DA850_MMCSDINT0_1]		= 7,
+	[IRQ_DA850_MMCSDINT1_1]		= 7,
+	[IRQ_DA850_T12CMPINT0_2]	= 7,
+	[IRQ_DA850_T12CMPINT1_2]	= 7,
+	[IRQ_DA850_T12CMPINT2_2]	= 7,
+	[IRQ_DA850_T12CMPINT3_2]	= 7,
+	[IRQ_DA850_T12CMPINT4_2]	= 7,
+	[IRQ_DA850_T12CMPINT5_2]	= 7,
+	[IRQ_DA850_T12CMPINT6_2]	= 7,
+	[IRQ_DA850_T12CMPINT7_2]	= 7,
+	[IRQ_DA850_T12CMPINT0_3]	= 7,
+	[IRQ_DA850_T12CMPINT1_3]	= 7,
+	[IRQ_DA850_T12CMPINT2_3]	= 7,
+	[IRQ_DA850_T12CMPINT3_3]	= 7,
+	[IRQ_DA850_T12CMPINT4_3]	= 7,
+	[IRQ_DA850_T12CMPINT5_3]	= 7,
+	[IRQ_DA850_T12CMPINT6_3]	= 7,
+	[IRQ_DA850_T12CMPINT7_3]	= 7,
+	[IRQ_DA850_RPIINT]		= 7,
+	[IRQ_DA850_VPIFINT]		= 7,
+	[IRQ_DA850_CCINT1]		= 7,
+	[IRQ_DA850_CCERRINT1]		= 7,
+	[IRQ_DA850_TCERRINT2]		= 7,
+	[IRQ_DA850_TINT12_3]		= 7,
+	[IRQ_DA850_TINT34_3]		= 7,
+	[IRQ_DA850_TINTALL_3]		= 7,
+	[IRQ_DA850_MCBSP0RINT]		= 7,
+	[IRQ_DA850_MCBSP0XINT]		= 7,
+	[IRQ_DA850_MCBSP1RINT]		= 7,
+	[IRQ_DA850_MCBSP1XINT]		= 7,
+	[IRQ_DA8XX_ARMCLKSTOPREQ]	= 7,
+};
+
+static struct map_desc da850_io_desc[] = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= DA8XX_CP_INTC_VIRT,
+		.pfn		= __phys_to_pfn(DA8XX_CP_INTC_BASE),
+		.length		= DA8XX_CP_INTC_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __iomem *da850_psc_bases[] = {
+	IO_ADDRESS(DA8XX_PSC0_BASE),
+	IO_ADDRESS(DA8XX_PSC1_BASE),
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id da850_ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb7d1,
+		.manufacturer	= 0x017,	/* 0x02f >> 1 */
+		.cpu_id		= DAVINCI_CPU_ID_DA850,
+		.name		= "da850/omap-l138",
+	},
+};
+
+static struct davinci_timer_instance da850_timer_instance[4] = {
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_0,
+		.top_irq	= IRQ_DA8XX_TINT34_0,
+	},
+	{
+		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.bottom_irq	= IRQ_DA8XX_TINT12_1,
+		.top_irq	= IRQ_DA8XX_TINT34_1,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P2_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_2,
+		.top_irq	= IRQ_DA850_TINT34_2,
+	},
+	{
+		.base		= IO_ADDRESS(DA850_TIMER64P3_BASE),
+		.bottom_irq	= IRQ_DA850_TINT12_3,
+		.top_irq	= IRQ_DA850_TINT34_3,
+	},
+};
+
+/*
+ * T0_BOT: Timer 0, bottom		: Used for clock_event
+ * T0_TOP: Timer 0, top			: Used for clocksource
+ * T1_BOT, T1_TOP: Timer 1, bottom & top: Used for watchdog timer
+ */
+static struct davinci_timer_info da850_timer_info = {
+	.timers		= da850_timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+static struct davinci_soc_info davinci_soc_info_da850 = {
+	.io_desc		= da850_io_desc,
+	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
+	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
+	.ids			= da850_ids,
+	.ids_num		= ARRAY_SIZE(da850_ids),
+	.cpu_clks		= da850_clks,
+	.psc_bases		= da850_psc_bases,
+	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
+	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
+	.pinmux_pins		= da850_pins,
+	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
+	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_irq_prios		= da850_default_priorities,
+	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
+	.timer_info		= &da850_timer_info,
+	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_num		= 128,
+	.gpio_irq		= IRQ_DA8XX_GPIO0,
+	.serial_dev		= &da8xx_serial_device,
+	.emac_pdata		= &da8xx_emac_pdata,
+};
+
+void __init da850_init(void)
+{
+	davinci_common_init(&davinci_soc_info_da850);
+}
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index fd41189e5c6..189b1ff1364 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -32,6 +32,7 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM355		0x03550000
 #define	DAVINCI_CPU_ID_DM365		0x03650000
 #define	DAVINCI_CPU_ID_DA830		0x08300000
+#define	DAVINCI_CPU_ID_DA850		0x08500000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -44,6 +45,7 @@ IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
 IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
+IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -75,4 +77,10 @@ IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 #define cpu_is_davinci_da830() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+#define cpu_is_davinci_da850() is_davinci_da850()
+#else
+#define cpu_is_davinci_da850() 0
+#endif
+
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 8c8dc135472..594f9882e42 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -59,6 +59,7 @@
 #define PINMUX19		0x4c
 
 void __init da830_init(void);
+void __init da850_init(void);
 
 int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
@@ -93,6 +94,12 @@ extern const short da830_ecap2_pins[];
 extern const short da830_eqep0_pins[];
 extern const short da830_eqep1_pins[];
 
+extern const short da850_uart0_pins[];
+extern const short da850_uart1_pins[];
+extern const short da850_uart2_pins[];
+extern const short da850_i2c0_pins[];
+extern const short da850_i2c1_pins[];
+
 int da8xx_pinmux_setup(const short pins[]);
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 735e378d27e..6047c2d9da3 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -340,9 +340,66 @@
 
 #define DA830_N_CP_INTC_IRQ		96
 
-/* da830 currently has the most gpio pins (128) */
+/* DA850 speicific interrupts */
+#define IRQ_DA850_MPUADDRERR0		27
+#define IRQ_DA850_MPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR0		27
+#define IRQ_DA850_IOPUPROTERR0		27
+#define IRQ_DA850_IOPUADDRERR1		27
+#define IRQ_DA850_IOPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR2		27
+#define IRQ_DA850_IOPUPROTERR2		27
+#define IRQ_DA850_BOOTCFG_ADDR_ERR	27
+#define IRQ_DA850_BOOTCFG_PROT_ERR	27
+#define IRQ_DA850_MPUADDRERR1		27
+#define IRQ_DA850_MPUPROTERR1		27
+#define IRQ_DA850_IOPUADDRERR3		27
+#define IRQ_DA850_IOPUPROTERR3		27
+#define IRQ_DA850_IOPUADDRERR4		27
+#define IRQ_DA850_IOPUPROTERR4		27
+#define IRQ_DA850_IOPUADDRERR5		27
+#define IRQ_DA850_IOPUPROTERR5		27
+#define IRQ_DA850_MIOPU_BOOTCFG_ERR	27
+#define IRQ_DA850_SATAINT		67
+#define IRQ_DA850_TINT12_2		68
+#define IRQ_DA850_TINT34_2		68
+#define IRQ_DA850_TINTALL_2		68
+#define IRQ_DA850_MMCSDINT0_1		72
+#define IRQ_DA850_MMCSDINT1_1		73
+#define IRQ_DA850_T12CMPINT0_2		74
+#define IRQ_DA850_T12CMPINT1_2		75
+#define IRQ_DA850_T12CMPINT2_2		76
+#define IRQ_DA850_T12CMPINT3_2		77
+#define IRQ_DA850_T12CMPINT4_2		78
+#define IRQ_DA850_T12CMPINT5_2		79
+#define IRQ_DA850_T12CMPINT6_2		80
+#define IRQ_DA850_T12CMPINT7_2		81
+#define IRQ_DA850_T12CMPINT0_3		82
+#define IRQ_DA850_T12CMPINT1_3		83
+#define IRQ_DA850_T12CMPINT2_3		84
+#define IRQ_DA850_T12CMPINT3_3		85
+#define IRQ_DA850_T12CMPINT4_3		86
+#define IRQ_DA850_T12CMPINT5_3		87
+#define IRQ_DA850_T12CMPINT6_3		88
+#define IRQ_DA850_T12CMPINT7_3		89
+#define IRQ_DA850_RPIINT		91
+#define IRQ_DA850_VPIFINT		92
+#define IRQ_DA850_CCINT1		93
+#define IRQ_DA850_CCERRINT1		94
+#define IRQ_DA850_TCERRINT2		95
+#define IRQ_DA850_TINT12_3		96
+#define IRQ_DA850_TINT34_3		96
+#define IRQ_DA850_TINTALL_3		96
+#define IRQ_DA850_MCBSP0RINT		97
+#define IRQ_DA850_MCBSP0XINT		98
+#define IRQ_DA850_MCBSP1RINT		99
+#define IRQ_DA850_MCBSP1XINT		100
+
+#define DA850_N_CP_INTC_IRQ		101
+
+/* da830/da850 currently has the most gpio pins (128) */
 #define DAVINCI_N_GPIO			128
-/* da830 currently has the most irqs so use DA830_N_CP_INTC_IRQ */
-#define NR_IRQS				(DA830_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
+/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
+#define NR_IRQS				(DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
 
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index cce7509ea30..3349fa5f82e 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -704,6 +704,34 @@ enum da830_index {
 	DA830_GPIO2_10,
 };
 
+enum davinci_da850_index {
+	/* UART0 function */
+	DA850_NUART0_CTS,
+	DA850_NUART0_RTS,
+	DA850_UART0_RXD,
+	DA850_UART0_TXD,
+
+	/* UART1 function */
+	DA850_NUART1_CTS,
+	DA850_NUART1_RTS,
+	DA850_UART1_RXD,
+	DA850_UART1_TXD,
+
+	/* UART2 function */
+	DA850_NUART2_CTS,
+	DA850_NUART2_RTS,
+	DA850_UART2_RXD,
+	DA850_UART2_TXD,
+
+	/* I2C1 function */
+	DA850_I2C1_SCL,
+	DA850_I2C1_SDA,
+
+	/* I2C0 function */
+	DA850_I2C0_SDA,
+	DA850_I2C0_SCL,
+};
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 6b9621d8828..171173c1dba 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -155,6 +155,7 @@
 #define DA8XX_LPSC0_GEM			15
 
 /* PSC1 defines */
+#define DA850_LPSC1_TPCC1		0
 #define DA8XX_LPSC1_USB20		1
 #define DA8XX_LPSC1_USB11		2
 #define DA8XX_LPSC1_GPIO		3
@@ -163,6 +164,7 @@
 #define DA8XX_LPSC1_EMIF3C		6
 #define DA8XX_LPSC1_McASP0		7
 #define DA830_LPSC1_McASP1		8
+#define DA850_LPSC1_SATA		8
 #define DA830_LPSC1_McASP2		9
 #define DA8XX_LPSC1_SPI1		10
 #define DA8XX_LPSC1_I2C			11
@@ -172,6 +174,7 @@
 #define DA8XX_LPSC1_PWM			17
 #define DA8XX_LPSC1_ECAP		20
 #define DA830_LPSC1_EQEP		21
+#define DA850_LPSC1_TPTC2		21
 #define DA8XX_LPSC1_SCR_P0_SS		24
 #define DA8XX_LPSC1_SCR_P1_SS		25
 #define DA8XX_LPSC1_CR_P3_SS		26
-- 
cgit v1.2.3


From 0fbc5592158db4e1ca2037178e1ea6733ccc6f61 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 16 Jul 2009 06:42:18 -0400
Subject: davinci: Add support for DA850/OMAP-L138 EVM board

Add support for the DA850/OMAP-L138 Evaluation Module (EVM)
from TI.  The EVM has User Interface (UI) card which contains
various devices. This UI card can be connected to the base
board. Support for all the devices on the UI card and ones on
the EVM will be added in subsequent patches.

The EVM schematics are not available publicly yet; but should
be available soon.

A new defconfig for this board has been added mainly because
the DA830/OMAP-L137 defconfig forces writethrough cache mode
which is not required on DA850/OMAP-L138.

This patch has been boot tested on DA850/OMAP-L138 EVM
using ramdisk as filesystem.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/da850_omapl138_defconfig        | 1229 ++++++++++++++++++++++
 arch/arm/mach-davinci/Kconfig                    |    7 +
 arch/arm/mach-davinci/Makefile                   |    1 +
 arch/arm/mach-davinci/board-da850-evm.c          |  102 ++
 arch/arm/mach-davinci/include/mach/debug-macro.S |    3 +-
 arch/arm/mach-davinci/include/mach/uncompress.h  |    3 +-
 6 files changed, 1343 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/configs/da850_omapl138_defconfig
 create mode 100644 arch/arm/mach-davinci/board-da850-evm.c

(limited to 'arch')

diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da850_omapl138_defconfig
new file mode 100644
index 00000000000..842a70b079b
--- /dev/null
+++ b/arch/arm/configs/da850_omapl138_defconfig
@@ -0,0 +1,1229 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-davinci1
+# Mon Jun 29 07:54:15 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_CP_INTC=y
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+# CONFIG_ARCH_DAVINCI_DM644x is not set
+# CONFIG_ARCH_DAVINCI_DM355 is not set
+# CONFIG_ARCH_DAVINCI_DM646x is not set
+# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_ARCH_DAVINCI_DA8XX=y
+# CONFIG_ARCH_DAVINCI_DM365 is not set
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DAVINCI_MUX=y
+# CONFIG_DAVINCI_MUX_DEBUG is not set
+# CONFIG_DAVINCI_MUX_WARNINGS is not set
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_DAVINCI_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SOC=m
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 1ee438ea979..40866c643f1 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -101,6 +101,13 @@ config MACH_DAVINCI_DA830_EVM
 	help
 	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 
+config MACH_DAVINCI_DA850_EVM
+	bool "TI DA850/OMAP-L138 Reference Platform"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 5f8a661c35b..2e11e847313 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
new file mode 100644
index 00000000000..eaa1fc1bc5f
--- /dev/null
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -0,0 +1,102 @@
+/*
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da830-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da850_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static __init void da850_evm_init(void)
+{
+	int ret;
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da850_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da850_i2c0_pins);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	davinci_serial_init(&da850_evm_uart_config);
+
+	/*
+	 * shut down uart 0 and 1; they are not used on the board and
+	 * accessing them causes endless "too much work in irq53" messages
+	 * with arago fs
+	 */
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da850_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da850_evm_console_init);
+#endif
+
+static __init void da850_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da850_evm_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da850_evm_map_io,
+	.init_irq	= da850_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da850_evm_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 9d16277b233..17ab5236da6 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -26,7 +26,8 @@
 		movne	\rx, #0xfe000000	@ virtual base
 #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
 #error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM)
+#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \
+	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
 		orr	\rx, \rx, #0x00d00000	@ physical base address
 		orr	\rx, \rx, #0x0000d000	@ of UART 2
 #else
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 46a0c3171e3..33796b4db17 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -21,7 +21,8 @@ static u32 *uart;
 
 static u32 *get_uart_base(void)
 {
-	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM)
+	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM ||
+		__machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM)
 		return (u32 *)DA8XX_UART2_BASE;
 	else
 		return (u32 *)DAVINCI_UART0_BASE;
-- 
cgit v1.2.3


From 5a4b131508236c0a59b8680f486c49e31881fe4e Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Fri, 17 Jul 2009 04:47:10 -0400
Subject: davinci: Add EMAC support for da850/omap-l138

Ethernet Media Access Controller (EMAC) on da850/omap-l138
supports 10/100 Mbps operation. It also supports Media
Independent Interface (MII) and Reduced Media Independent
Interface (RMII) to physical layer (PHY).

Phy which supports MII is present on the DA850/OMAP-L138
base board and Phy supporting RMII is present on the
UI card. This patch adds support only for the MII Phy.
Support for RMII Phy will be added later.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 18 +++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 31 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  1 +
 arch/arm/mach-davinci/include/mach/mux.h   | 17 ++++++++++++++++
 4 files changed, 67 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index eaa1fc1bc5f..d9893462960 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -26,6 +26,9 @@
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 
+#define DA850_EVM_PHY_MASK		0x1
+#define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -37,6 +40,7 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 
 static __init void da850_evm_init(void)
 {
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
 	ret = da8xx_register_edma();
@@ -54,6 +58,20 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 0;
+
+	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+	if (ret)
+		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
+				ret);
+
 	ret = da8xx_register_watchdog();
 	if (ret)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 332cf7fadb1..4a43ae2bec0 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -283,6 +283,12 @@ static struct clk rmii_clk = {
 	.parent		= &pll0_sysclk7,
 };
 
+static struct clk emac_clk = {
+	.name		= "emac",
+	.parent		= &pll0_sysclk4,
+	.lpsc		= DA8XX_LPSC1_CPGMAC,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -319,6 +325,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"emif3",	&emif3_clk),
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
+	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -347,6 +354,22 @@ static const struct mux_config da850_pins[] = {
 	/* I2C0 function */
 	MUX_CFG(DA850, I2C0_SDA,	4,	12,	15,	2,	false)
 	MUX_CFG(DA850, I2C0_SCL,	4,	8,	15,	2,	false)
+	/* EMAC function */
+	MUX_CFG(DA850, MII_TXEN,	2,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXCLK,	2,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_COL,		2,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_3,	2,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_2,	2,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_1,	2,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_TXD_0,	2,	28,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXCLK,	3,	0,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXDV,	3,	4,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXER,	3,	8,	15,	8,	false)
+	MUX_CFG(DA850, MII_CRS,		3,	12,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_3,	3,	16,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_2,	3,	20,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_1,	3,	24,	15,	8,	false)
+	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
 #endif
 };
 
@@ -375,6 +398,14 @@ const short da850_i2c1_pins[] __initdata = {
 	-1
 };
 
+const short da850_cpgmac_pins[] __initdata = {
+	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 594f9882e42..a8cb5709848 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -99,6 +99,7 @@ extern const short da850_uart1_pins[];
 extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
+extern const short da850_cpgmac_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 3349fa5f82e..368fca69197 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -730,6 +730,23 @@ enum davinci_da850_index {
 	/* I2C0 function */
 	DA850_I2C0_SDA,
 	DA850_I2C0_SCL,
+
+	/* EMAC function */
+	DA850_MII_TXEN,
+	DA850_MII_TXCLK,
+	DA850_MII_COL,
+	DA850_MII_TXD_3,
+	DA850_MII_TXD_2,
+	DA850_MII_TXD_1,
+	DA850_MII_TXD_0,
+	DA850_MII_RXER,
+	DA850_MII_CRS,
+	DA850_MII_RXCLK,
+	DA850_MII_RXDV,
+	DA850_MII_RXD_3,
+	DA850_MII_RXD_2,
+	DA850_MII_RXD_1,
+	DA850_MII_RXD_0,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 10a1af384e8157fa2e3275d68346cceff1ad06ca Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Fri, 17 Jul 2009 08:28:26 -0700
Subject: davinci: Kconfig: update default defconfig

Updated default defconfig after da850 merge and 2.6.31-rc3 update.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/configs/davinci_all_defconfig | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 8c669ae94e3..5aec768ed10 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc2
-# Mon Jul  6 14:38:31 2009
+# Linux kernel version: 2.6.31-rc3-davinci1
+# Fri Jul 17 08:26:52 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -200,6 +200,7 @@ CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
 # CONFIG_ARCH_DAVINCI_DA830 is not set
+# CONFIG_ARCH_DAVINCI_DA850 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
 
 #
@@ -757,13 +758,14 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1262,8 +1264,8 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
-- 
cgit v1.2.3


From 548197bdf02882db39b7563d26975e7549e6af03 Mon Sep 17 00:00:00 2001
From: Hemant Pedanekar <hemantp@ti.com>
Date: Fri, 17 Jul 2009 23:30:36 +0530
Subject: davinci: dm646x-evm: Add support for IDE

Controls ATA_RSTn and ATA_PWD through CPLD register 0 to enable ATA. An I2C
driver is added for the same. Calls ide init if enabled in configuration.

Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c | 59 ++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 0aa18df4110..fa91520532a 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -48,6 +48,17 @@
 #include <mach/mmc.h>
 #include <mach/emac.h>
 
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+/* CPLD Register 0 bits to control ATA */
+#define DM646X_EVM_ATA_RST		BIT(0)
+#define DM646X_EVM_ATA_PWD		BIT(1)
+
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
@@ -55,6 +66,47 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* CPLD Register 0 Client: used for I/O Control */
+static int cpld_reg0_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	if (HAS_ATA) {
+		u8 data;
+		struct i2c_msg msg[2] = {
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &data,
+			},
+			{
+				.addr = client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &data,
+			},
+		};
+
+		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
+		i2c_transfer(client->adapter, msg, 1);
+		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
+		i2c_transfer(client->adapter, msg + 1, 1);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id cpld_reg_ids[] = {
+	{ "cpld_reg0", 0, },
+	{ },
+};
+
+static struct i2c_driver dm6467evm_cpld_driver = {
+	.driver.name	= "cpld_reg0",
+	.id_table	= cpld_reg_ids,
+	.probe		= cpld_reg0_probe,
+};
+
 /* LEDS */
 
 static struct gpio_led evm_leds[] = {
@@ -246,6 +298,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("pcf8574a", 0x38),
 		.platform_data	= &pcf_data,
 	},
+	{
+		I2C_BOARD_INFO("cpld_reg0", 0x3a),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -256,6 +311,7 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6467evm_cpld_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
 
@@ -273,6 +329,9 @@ static __init void evm_init(void)
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
+	if (HAS_ATA)
+		dm646x_init_ide();
+
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
 }
-- 
cgit v1.2.3


From 61aa07328d8e70d95a1e2325288df52a1e92a694 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Wed, 15 Jul 2009 08:47:48 -0700
Subject: davinci: audio clocks: use struct device instead of clock names

There is no need to pass clock name strings in platform_data.
Instead, setup clkdev nodes to have correct ASoC device names.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c  | 4 +---
 arch/arm/mach-davinci/board-dm644x-evm.c | 4 +---
 arch/arm/mach-davinci/board-dm646x-evm.c | 2 --
 arch/arm/mach-davinci/dm355.c            | 6 +++---
 arch/arm/mach-davinci/dm644x.c           | 2 +-
 arch/arm/mach-davinci/dm646x.c           | 4 ++--
 arch/arm/mach-davinci/include/mach/asp.h | 1 -
 7 files changed, 8 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 4ef6dbeccf3..38157f78e1a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -117,9 +117,7 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
-static struct snd_platform_data dm355_evm_snd_data = {
-	.clk_name	= "asp1",
-};
+static struct snd_platform_data dm355_evm_snd_data;
 
 static int dm355evm_mmc_gpios = -EINVAL;
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index d37f5c204b6..6a27c5db328 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -225,9 +225,7 @@ static struct platform_device ide_dev = {
 	},
 };
 
-static struct snd_platform_data dm644x_evm_snd_data = {
-	.clk_name	= "asp0",
-};
+static struct snd_platform_data dm644x_evm_snd_data;
 
 /*----------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index fa91520532a..cb30afe2205 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -268,7 +268,6 @@ static u8 dm646x_dit_serializer_direction[] = {
 
 static struct snd_platform_data dm646x_evm_snd_data[] = {
 	{
-		.clk_name       = "mcasp0",
 		.tx_dma_offset  = 0x400,
 		.rx_dma_offset  = 0x400,
 		.op_mode        = DAVINCI_MCASP_IIS_MODE,
@@ -278,7 +277,6 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.eventq_no      = EVENTQ_0,
 	},
 	{
-		.clk_name       = "mcasp1",
 		.tx_dma_offset  = 0x400,
 		.rx_dma_offset  = 0,
 		.op_mode        = DAVINCI_MCASP_DIT_MODE,
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index b4d709a8612..3abeb3eb9b2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -361,8 +361,8 @@ static struct davinci_clk dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK(NULL, "asp0", &asp0_clk),
-	CLK(NULL, "asp1", &asp1_clk),
+	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-asp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK(NULL, "spi0", &spi0_clk),
@@ -648,7 +648,7 @@ static struct resource dm355_asp1_resources[] = {
 
 static struct platform_device dm355_asp1_device = {
 	.name		= "davinci-asp",
-	.id		= -1,
+	.id		= 1,
 	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
 	.resource	= dm355_asp1_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 55317b1cf86..e554aa6c9a8 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -304,7 +304,7 @@ struct davinci_clk dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK(NULL, "asp0", &asp_clk),
+	CLK("davinci-asp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 3516f7699db..8fa28039f27 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -334,8 +334,8 @@ struct davinci_clk dm646x_clks[] = {
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK(NULL, "gpio", &gpio_clk),
-	CLK(NULL, "mcasp0", &mcasp0_clk),
-	CLK(NULL, "mcasp1", &mcasp1_clk),
+	CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
+	CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
 	CLK(NULL, "aemif", &aemif_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK(NULL, "pwm0", &pwm0_clk),
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index 038ecb7c231..cdf1f444233 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -33,7 +33,6 @@
 #define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
 
 struct snd_platform_data {
-	char *clk_name;
 	u32 tx_dma_offset;
 	u32 rx_dma_offset;
 	enum dma_event_q eventq_no;	/* event queue number */
-- 
cgit v1.2.3


From 889c1e0dabcebe3aab3fb5aec3f506d7d614ec61 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Thu, 16 Jul 2009 06:59:42 -0700
Subject: davinci: Kconfig: add dm646x ASoC support

---
 arch/arm/configs/davinci_all_defconfig | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 5aec768ed10..ddffe39d9f8 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1088,9 +1088,16 @@ CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_DAVINCI_SOC=m
+CONFIG_SND_DAVINCI_SOC_I2S=m
+CONFIG_SND_DAVINCI_SOC_MCASP=m
+CONFIG_SND_DAVINCI_SOC_EVM=m
+CONFIG_SND_DM6467_SOC_EVM=m
+# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-- 
cgit v1.2.3


From 10eef5a8a08d8be455ae5f9599b214c33ad52340 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 27 Jul 2009 08:50:16 -0400
Subject: DaVinci: EDMA: Add queue 2 and 3 for DM365 and DM6467

DM365 and DM6467 have 4 queues. The patch updates the
'dma_event_q' enum to reflect this.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/edma.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index a85cbedc9b0..5d489622646 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -210,6 +210,8 @@ enum fifo_width {
 enum dma_event_q {
 	EVENTQ_0 = 0,
 	EVENTQ_1 = 1,
+	EVENTQ_2 = 2,
+	EVENTQ_3 = 3,
 	EVENTQ_DEFAULT = -1
 };
 
-- 
cgit v1.2.3


From a0f0202e2a19d43d733e07cb435a3064324c2ba7 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 27 Jul 2009 09:57:07 -0400
Subject: DaVinci: EDMA: Updating default queue handling

EDMA queues in DM365 are a little different than those
on other DaVinci's. On DM365 Q0 and Q1 have the larger
FIFO size. We want Q0 and Q1 to be used by codecs and
DVSDK demos.
MMC driver is the only driver which uses the flag
'EVENTQ_DEFAULT'. So MMC driver should be using Q2 instead of
Q1 on DM365.
This patch allows us to declare a "default queue" from
SOC specific code. If it is not declared then the EDMA
driver assumes a default of queue 1.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c             | 1 +
 arch/arm/mach-davinci/dma.c               | 7 ++++++-
 arch/arm/mach-davinci/include/mach/edma.h | 1 +
 3 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f02bce8eeba..aa3b0bbdda7 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -741,6 +741,7 @@ static struct edma_soc_info dm365_edma_info[] = {
 		.n_cc			= 1,
 		.queue_tc_mapping	= dm365_queue_tc_mapping,
 		.queue_priority_mapping	= dm365_queue_priority_mapping,
+		.default_queue		= EVENTQ_2,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 5908f7717b2..e6d7e6aca33 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -225,6 +225,7 @@ struct edma {
 	unsigned	num_slots;
 	unsigned	num_tc;
 	unsigned	num_cc;
+	enum dma_event_q 	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
@@ -267,7 +268,7 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
 
 	/* default to low priority queue */
 	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = EVENTQ_1;
+		queue_no = edma_info[ctlr]->default_queue;
 
 	queue_no &= 7;
 	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
@@ -1249,6 +1250,10 @@ static int __init edma_probe(struct platform_device *pdev)
 		edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc,
 							EDMA_MAX_CC);
 
+		edma_info[j]->default_queue = info[j].default_queue;
+		if (!edma_info[j]->default_queue)
+			edma_info[j]->default_queue = EVENTQ_1;
+
 		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
 			edmacc_regs_base[j]);
 
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index 5d489622646..3c7dc2db70e 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -271,6 +271,7 @@ struct edma_soc_info {
 	unsigned	n_slot;
 	unsigned	n_tc;
 	unsigned	n_cc;
+	enum dma_event_q	default_queue;
 
 	/* list of channels with no even trigger; terminated by "-1" */
 	const s8	*noevent;
-- 
cgit v1.2.3


From 866d286953c359e7b1fc0b8d04254d144a11be68 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 3 Aug 2009 13:58:24 -0400
Subject: DaVinci: DM365: Fix Compilation issue due to PINMUX entry

The mask can hold only 8 bit values. This gave a
compilation warning. This patch rectifies the warning.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c            | 3 ++-
 arch/arm/mach-davinci/include/mach/mux.h | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index aa3b0bbdda7..0a33e128f3f 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -582,7 +582,8 @@ MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
 MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
 MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
 MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_YIN_EN,	0,   0,     0xfff, 0,	 false)
+MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
+MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
 
 INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
 INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 368fca69197..a676b2f47aa 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -280,7 +280,8 @@ enum davinci_dm365_index {
 	DM365_VIN_CAM_WEN,
 	DM365_VIN_CAM_VD,
 	DM365_VIN_CAM_HD,
-	DM365_VIN_YIN_EN,
+	DM365_VIN_YIN4_7_EN,
+	DM365_VIN_YIN0_3_EN,
 
 	/* IRQ muxing */
 	DM365_INT_EDMA_CC,
-- 
cgit v1.2.3


From cc36e97b0b33d9041928e4db45654223a59c1a75 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Fri, 7 Aug 2009 13:19:45 -0400
Subject: DaVinci: DM365: Add Support for new Revision of silicon

DM365 RBL has been updated. The variant number has changed for this
new revision of silicon. This patch adds support for the
new revision of DM365.
The name fields are also being updated to reflect the version
of the silicon.

Without this minor fix DM365 REV 1.2 will not boot up

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 0a33e128f3f..f8bac9486b0 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -821,7 +821,14 @@ static struct davinci_id dm365_ids[] = {
 		.part_no	= 0xb83e,
 		.manufacturer	= 0x017,
 		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365",
+		.name		= "dm365_rev1.1",
+	},
+	{
+		.variant	= 0x8,
+		.part_no	= 0xb83e,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM365,
+		.name		= "dm365_rev1.2",
 	},
 };
 
-- 
cgit v1.2.3


From 53ca5c916971f72262ef37287e17f0a7d980362c Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 11 Aug 2009 11:10:50 -0400
Subject: davinci: Configure MDIO pins for EMAC

Earlier patch which adds EMAC support for da850/omap-l138
was not configuring the MDIO pins.

Ethernet was working fine with the earlier patch, because
the MDIO pins were configured from the boot loader. This
patch removes that dependency.

Also, this patch populates a member in the emac clk structure
to say that EMAC LPSC sits on controller 1.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/da850.c            | 6 +++++-
 arch/arm/mach-davinci/include/mach/mux.h | 2 ++
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 4a43ae2bec0..22205a3727a 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -287,6 +287,7 @@ static struct clk emac_clk = {
 	.name		= "emac",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_CPGMAC,
+	.psc_ctlr	= 1,
 };
 
 static struct davinci_clk da850_clks[] = {
@@ -370,6 +371,8 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MII_RXD_2,	3,	20,	15,	8,	false)
 	MUX_CFG(DA850, MII_RXD_1,	3,	24,	15,	8,	false)
 	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
+	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
 #endif
 };
 
@@ -402,7 +405,8 @@ const short da850_cpgmac_pins[] __initdata = {
 	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
 	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
 	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+	DA850_MDIO_D,
 	-1
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index a676b2f47aa..8676680fc5b 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -748,6 +748,8 @@ enum davinci_da850_index {
 	DA850_MII_RXD_2,
 	DA850_MII_RXD_1,
 	DA850_MII_RXD_0,
+	DA850_MDIO_CLK,
+	DA850_MDIO_D,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 5a8d5441f4aac3ef0478d5de723422304c611926 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Tue, 11 Aug 2009 16:14:21 -0400
Subject: davinci: Correct the number of GPIO pins for da850/omap-l138

DA850/OMAP-L138 has 144 pins configurable as GPIO, but
currently this has been configured as 128. This patch
corrects it.

Also, this patch adds the base address for GPIO pins
greater than 128.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/da850.c             | 2 +-
 arch/arm/mach-davinci/include/mach/gpio.h | 2 ++
 arch/arm/mach-davinci/include/mach/irqs.h | 4 ++--
 3 files changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 22205a3727a..c5efc515df4 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -623,7 +623,7 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
 	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
-	.gpio_num		= 128,
+	.gpio_num		= 144,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index ebcc29babea..4f032b38cd6 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -78,6 +78,8 @@ __gpio_to_controller(unsigned gpio)
 		ptr = base + 0x60;
 	else if (gpio < 32 * 4)
 		ptr = base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = base + 0xb0;
 	else
 		ptr = NULL;
 	return ptr;
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 6047c2d9da3..7f755cc387e 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -397,8 +397,8 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
-/* da830/da850 currently has the most gpio pins (128) */
-#define DAVINCI_N_GPIO			128
+/* da850 currently has the most gpio pins (144) */
+#define DAVINCI_N_GPIO			144
 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
 #define NR_IRQS				(DA850_N_CP_INTC_IRQ + DAVINCI_N_GPIO)
 
-- 
cgit v1.2.3


From e33ef5e3b368b31705d3024ee6a326f2a85a78fb Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 11 Aug 2009 17:01:59 -0400
Subject: davinci: Audio support for DA830 EVM

Define resources for McASP1 used on DA830/OMAP-L137 EVM, add platform
device defintion, initialization function.  Additionally, this patch
also adds version and FIFO related members to platform data structure.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c    | 27 ++++++++++++++++++++++
 arch/arm/mach-davinci/da830.c              |  7 +++---
 arch/arm/mach-davinci/devices-da8xx.c      | 36 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/asp.h   | 15 +++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  3 +++
 5 files changed, 85 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 90256693b8d..a45340de746 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -23,6 +23,7 @@
 #include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
+#include <mach/asp.h>
 
 #define DA830_EVM_PHY_MASK		0x0
 #define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
@@ -51,6 +52,25 @@ static struct davinci_uart_config da830_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+static u8 da830_iis_serializer_direction[] = {
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da830_evm_snd_data = {
+	.tx_dma_offset  = 0x2000,
+	.rx_dma_offset  = 0x2000,
+	.op_mode        = DAVINCI_MCASP_IIS_MODE,
+	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
+	.tdm_slots      = 2,
+	.serial_dir     = da830_iis_serializer_direction,
+	.eventq_no      = EVENTQ_0,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
 static __init void da830_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -93,6 +113,13 @@ static __init void da830_evm_init(void)
 	davinci_serial_init(&da830_evm_uart_config);
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
+
+	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	if (ret)
+		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(1, &da830_evm_snd_data);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 3a9b6346c31..19b2748357f 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -23,6 +23,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -411,9 +412,9 @@ static struct davinci_clk da830_clks[] = {
 	CLK("eqep.0",		NULL,		&eqep0_clk),
 	CLK("eqep.1",		NULL,		&eqep1_clk),
 	CLK("da830_lcdc",	NULL,		&lcdc_clk),
-	CLK("soc-audio.0",	NULL,		&mcasp0_clk),
-	CLK("soc-audio.1",	NULL,		&mcasp1_clk),
-	CLK("soc-audio.2",	NULL,		&mcasp2_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
+	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
+	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
 	CLK("musb_hdrc",	NULL,		&usb20_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"aintc",	&aintc_clk),
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 11c0971e13a..fe0baafcf61 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -281,7 +281,43 @@ static struct platform_device da8xx_emac_device = {
 	.resource	= da8xx_emac_resources,
 };
 
+static struct resource da830_mcasp1_resources[] = {
+	{
+		.name	= "mcasp1",
+		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
+		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da830_mcasp1_device = {
+	.name		= "davinci-mcasp",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
+	.resource	= da830_mcasp1_resources,
+};
+
 int __init da8xx_register_emac(void)
 {
 	return platform_device_register(&da8xx_emac_device);
 }
+
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
+{
+	if (id == 1) { /* DA830/OMAP-L137 has 3 instances of McASP */
+		da830_mcasp1_device.dev.platform_data = pdata;
+		platform_device_register(&da830_mcasp1_device);
+	}
+}
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index cdf1f444233..f3c97ac3425 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -15,6 +15,9 @@
 #define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
 #define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
 
+/* Bases of da830 McASP1 register banks */
+#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
+
 /* EDMA channels of dm644x and dm355 */
 #define DAVINCI_DMA_ASP0_TX	2
 #define DAVINCI_DMA_ASP0_RX	3
@@ -26,6 +29,10 @@
 #define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
 #define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
 
+/* EDMA channels of da830 McASP1 */
+#define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
+#define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
+
 /* Interrupts */
 #define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
 #define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
@@ -43,6 +50,14 @@ struct snd_platform_data {
 	u8 op_mode;
 	u8 num_serializer;
 	u8 *serial_dir;
+	u8 version;
+	u8 txnumevt;
+	u8 rxnumevt;
+};
+
+enum {
+	MCASP_VERSION_1 = 0,	/* DM646x */
+	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
 };
 
 #define INACTIVE_MODE	0
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index a8cb5709848..30c5c407ea8 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -15,6 +15,7 @@
 #include <mach/edma.h>
 #include <mach/i2c.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
 
 /*
  * The cp_intc interrupt controller for the da8xx isn't in the same
@@ -65,6 +66,7 @@ int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_emac(void);
+void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
@@ -100,6 +102,7 @@ extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
+extern const short da850_mcasp_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
-- 
cgit v1.2.3


From 491214e1f8129844289869bb6c231dc4542b11e3 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 11 Aug 2009 17:03:25 -0400
Subject: davinci: Audio support for DA850/OMAP-L138 EVM

Define resources for McASP used on DA850/OMAP-L138 EVM, add platform
device defintion and Pin Mux configurations.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c  | 29 ++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c            | 39 ++++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c    | 34 +++++++++++++++++++++++++++-
 arch/arm/mach-davinci/include/mach/asp.h |  7 ++++++
 arch/arm/mach-davinci/include/mach/mux.h | 25 ++++++++++++++++++++
 5 files changed, 133 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index d9893462960..52bfe4cba25 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -38,6 +38,28 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+/* davinci da850 evm audio machine driver */
+static u8 da850_iis_serializer_direction[] = {
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da850_evm_snd_data = {
+	.tx_dma_offset	= 0x2000,
+	.rx_dma_offset	= 0x2000,
+	.op_mode	= DAVINCI_MCASP_IIS_MODE,
+	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
+	.tdm_slots	= 2,
+	.serial_dir	= da850_iis_serializer_direction,
+	.eventq_no	= EVENTQ_1,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+
 static __init void da850_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -86,6 +108,13 @@ static __init void da850_evm_init(void)
 	 */
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+	ret = da8xx_pinmux_setup(da850_mcasp_pins);
+	if (ret)
+		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(0, &da850_evm_snd_data);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index c5efc515df4..e440c09c557 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -290,6 +290,13 @@ static struct clk emac_clk = {
 	.psc_ctlr	= 1,
 };
 
+static struct clk mcasp_clk = {
+	.name		= "mcasp",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_McASP0,
+	.psc_ctlr	= 1,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -327,6 +334,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
+	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -373,6 +381,30 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
+	/* McASP function */
+	MUX_CFG(DA850,	ACLKR,		0,	0,	15,	1,	false)
+	MUX_CFG(DA850,	ACLKX,		0,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AFSR,		0,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AFSX,		0,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKR,		0,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AHCLKX,		0,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AMUTE,		0,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_15,		1,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_14,		1,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_13,		1,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_12,		1,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_11,		1,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_10,		1,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_9,		1,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_8,		1,	28,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_7,		2,	0,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_6,		2,	4,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_5,		2,	8,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_4,		2,	12,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_3,		2,	16,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_2,		2,	20,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_1,		2,	24,	15,	1,	false)
+	MUX_CFG(DA850,	AXR_0,		2,	28,	15,	1,	false)
 #endif
 };
 
@@ -410,6 +442,13 @@ const short da850_cpgmac_pins[] __initdata = {
 	-1
 };
 
+const short da850_mcasp_pins[] __initdata = {
+	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
+	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
+	DA850_AXR_11, DA850_AXR_12,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index fe0baafcf61..1882eef3aea 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -309,6 +309,34 @@ static struct platform_device da830_mcasp1_device = {
 	.resource	= da830_mcasp1_resources,
 };
 
+static struct resource da850_mcasp_resources[] = {
+	{
+		.name	= "mcasp",
+		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
+		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* TX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
+		.flags	= IORESOURCE_DMA,
+	},
+	/* RX event */
+	{
+		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da850_mcasp_device = {
+	.name		= "davinci-mcasp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
+	.resource	= da850_mcasp_resources,
+};
+
 int __init da8xx_register_emac(void)
 {
 	return platform_device_register(&da8xx_emac_device);
@@ -316,8 +344,12 @@ int __init da8xx_register_emac(void)
 
 void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
 {
-	if (id == 1) { /* DA830/OMAP-L137 has 3 instances of McASP */
+	/* DA830/OMAP-L137 has 3 instances of McASP */
+	if (cpu_is_davinci_da830() && id == 1) {
 		da830_mcasp1_device.dev.platform_data = pdata;
 		platform_device_register(&da830_mcasp1_device);
+	} else if (cpu_is_davinci_da850()) {
+		da850_mcasp_device.dev.platform_data = pdata;
+		platform_device_register(&da850_mcasp_device);
 	}
 }
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index f3c97ac3425..18e4ce34ece 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -15,6 +15,9 @@
 #define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
 #define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
 
+/* Bases of da850/da830 McASP0  register banks */
+#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
+
 /* Bases of da830 McASP1 register banks */
 #define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
 
@@ -29,6 +32,10 @@
 #define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
 #define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
 
+/* EDMA channels of da850/da830 McASP0 */
+#define	DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
+#define	DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
+
 /* EDMA channels of da830 McASP1 */
 #define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
 #define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 8676680fc5b..82d75146185 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -750,6 +750,31 @@ enum davinci_da850_index {
 	DA850_MII_RXD_0,
 	DA850_MDIO_CLK,
 	DA850_MDIO_D,
+
+	/* McASP function */
+	DA850_ACLKR,
+	DA850_ACLKX,
+	DA850_AFSR,
+	DA850_AFSX,
+	DA850_AHCLKR,
+	DA850_AHCLKX,
+	DA850_AMUTE,
+	DA850_AXR_15,
+	DA850_AXR_14,
+	DA850_AXR_13,
+	DA850_AXR_12,
+	DA850_AXR_11,
+	DA850_AXR_10,
+	DA850_AXR_9,
+	DA850_AXR_8,
+	DA850_AXR_7,
+	DA850_AXR_6,
+	DA850_AXR_5,
+	DA850_AXR_4,
+	DA850_AXR_3,
+	DA850_AXR_2,
+	DA850_AXR_1,
+	DA850_AXR_0,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From b1466376b22e1ec6395ccda7580deb72d3a809ad Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 12:11:56 -0400
Subject: davinci: Macro to convert GPIO signal to GPIO pin number

Adds a macro to convert the GPIO signal passed as bank number
and signal to GPIO pin number.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/include/mach/gpio.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index 4f032b38cd6..f3b8ef87815 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -42,6 +42,9 @@
  */
 #define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
 
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
 struct gpio_controller {
 	u32	dir;
 	u32	out_data;
-- 
cgit v1.2.3


From 5cbdf276bd9d9cd3cb9616f8253390096c1a237f Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 14:33:14 -0400
Subject: davinci: Add platform support for da850/omap-l138 GLCD

This patch adds platform support for the graphic display
(Sharp LK043T1DG01) found on DA850/OMAP-L138 based EVM.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 50 +++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 42 +++++++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c      | 59 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  3 ++
 arch/arm/mach-davinci/include/mach/mux.h   | 26 +++++++++++++
 5 files changed, 180 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 52bfe4cba25..b1df784ed70 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,6 +17,7 @@
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -29,6 +30,9 @@
 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
 
+#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -59,6 +63,37 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+static int da850_lcd_hw_init(void)
+{
+	int status;
+
+	status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
+	if (status < 0)
+		return status;
+
+	status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
+	if (status < 0) {
+		gpio_free(DA850_LCD_BL_PIN);
+		return status;
+	}
+
+	gpio_direction_output(DA850_LCD_BL_PIN, 0);
+	gpio_direction_output(DA850_LCD_PWR_PIN, 0);
+
+	/* disable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 0);
+
+	/* disable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 0);
+
+	/* enable lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, 1);
+
+	/* enable lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, 1);
+
+	return 0;
+}
 
 static __init void da850_evm_init(void)
 {
@@ -115,6 +150,21 @@ static __init void da850_evm_init(void)
 				ret);
 
 	da8xx_init_mcasp(0, &da850_evm_snd_data);
+
+	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+	if (ret)
+		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da850_lcd_hw_init();
+	if (ret)
+		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc();
+	if (ret)
+		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index e440c09c557..e6e605bf151 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -297,6 +297,13 @@ static struct clk mcasp_clk = {
 	.psc_ctlr	= 1,
 };
 
+static struct clk lcdc_clk = {
+	.name		= "lcdc",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC1_LCDC,
+	.psc_ctlr	= 1,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -335,6 +342,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
+	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -405,6 +413,30 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850,	AXR_2,		2,	20,	15,	1,	false)
 	MUX_CFG(DA850,	AXR_1,		2,	24,	15,	1,	false)
 	MUX_CFG(DA850,	AXR_0,		2,	28,	15,	1,	false)
+	/* LCD function */
+	MUX_CFG(DA850, LCD_D_7,		16,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_6,		16,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_5,		16,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_4,		16,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_3,		16,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_2,		16,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_1,		17,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_0,		17,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_15,	17,	8,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_14,	17,	12,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_13,	17,	16,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_12,	17,	20,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_11,	17,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_10,	17,	28,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_9,		18,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_D_8,		18,	4,	15,	2,	false)
+	MUX_CFG(DA850, LCD_PCLK,	18,	24,	15,	2,	false)
+	MUX_CFG(DA850, LCD_HSYNC,	19,	0,	15,	2,	false)
+	MUX_CFG(DA850, LCD_VSYNC,	19,	4,	15,	2,	false)
+	MUX_CFG(DA850, NLCD_AC_ENB_CS,	19,	24,	15,	2,	false)
+	/* GPIO function */
+	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
+	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
 #endif
 };
 
@@ -449,6 +481,16 @@ const short da850_mcasp_pins[] __initdata = {
 	-1
 };
 
+const short da850_lcdcntl_pins[] __initdata = {
+	DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
+	DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
+	DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
+	DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
+	DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
+	DA850_GPIO8_10,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 1882eef3aea..094eb8ed8e7 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -21,6 +21,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <video/da8xx-fb.h>
 
 #include "clock.h"
 
@@ -353,3 +354,61 @@ void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
 		platform_device_register(&da850_mcasp_device);
 	}
 }
+
+static const struct display_panel disp_panel = {
+	QVGA,
+	16,
+	16,
+	COLOR_ACTIVE,
+};
+
+static struct lcd_ctrl_config lcd_cfg = {
+	&disp_panel,
+	.ac_bias		= 255,
+	.ac_bias_intrpt		= 0,
+	.dma_burst_sz		= 16,
+	.bpp			= 16,
+	.fdd			= 255,
+	.tft_alt_mode		= 0,
+	.stn_565_mode		= 0,
+	.mono_8bit_mode		= 0,
+	.invert_line_clock	= 1,
+	.invert_frm_clock	= 1,
+	.sync_edge		= 0,
+	.sync_ctrl		= 1,
+	.raster_order		= 0,
+};
+
+static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
+	.manu_name = "sharp",
+	.controller_data = &lcd_cfg,
+	.type = "Sharp_LK043T1DG01",
+};
+
+static struct resource da8xx_lcdc_resources[] = {
+	[0] = { /* registers */
+		.start  = DA8XX_LCD_CNTRL_BASE,
+		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = { /* interrupt */
+		.start  = IRQ_DA8XX_LCDINT,
+		.end    = IRQ_DA8XX_LCDINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da850_lcdc_device = {
+	.name		= "da8xx_lcdc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
+	.resource	= da8xx_lcdc_resources,
+	.dev = {
+		.platform_data = &da850_evm_lcdc_pdata,
+	}
+};
+
+int __init da8xx_register_lcdc(void)
+{
+	return platform_device_register(&da850_lcdc_device);
+}
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 30c5c407ea8..0af3fb6077a 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -37,6 +37,7 @@
 #define DA8XX_TIMER64P1_BASE	0x01c21000
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
+#define DA8XX_LCD_CNTRL_BASE	0x01e13000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -66,6 +67,7 @@ int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_emac(void);
+int da8xx_register_lcdc(void);
 void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
 
 extern struct platform_device da8xx_serial_device;
@@ -103,6 +105,7 @@ extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
 extern const short da850_mcasp_pins[];
+extern const short da850_lcdcntl_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 82d75146185..30bf329d537 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -775,6 +775,32 @@ enum davinci_da850_index {
 	DA850_AXR_2,
 	DA850_AXR_1,
 	DA850_AXR_0,
+
+	/* LCD function */
+	DA850_LCD_D_7,
+	DA850_LCD_D_6,
+	DA850_LCD_D_5,
+	DA850_LCD_D_4,
+	DA850_LCD_D_3,
+	DA850_LCD_D_2,
+	DA850_LCD_D_1,
+	DA850_LCD_D_0,
+	DA850_LCD_D_15,
+	DA850_LCD_D_14,
+	DA850_LCD_D_13,
+	DA850_LCD_D_12,
+	DA850_LCD_D_11,
+	DA850_LCD_D_10,
+	DA850_LCD_D_9,
+	DA850_LCD_D_8,
+	DA850_LCD_PCLK,
+	DA850_LCD_HSYNC,
+	DA850_LCD_VSYNC,
+	DA850_NLCD_AC_ENB_CS,
+
+	/* GPIO function */
+	DA850_GPIO2_15,
+	DA850_GPIO8_10,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 700691f27ed9b0891cece9032e4de8c0b482c625 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 15:16:23 -0400
Subject: davinci: Add MMC/SD support for da850/omap-l138

There are two instances of MMC/SD on da850/omap-l138.
Connector for the first instance is available on the
EVM. This patch adds support for this instance.

This patch also adds support for card detect and write
protect switches on da850/omap-l138 EVM.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 42 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 23 ++++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c      | 36 +++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  4 +++
 arch/arm/mach-davinci/include/mach/mux.h   | 10 +++++++
 5 files changed, 115 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index b1df784ed70..eb998ce6d46 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -33,6 +33,9 @@
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
 
+#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -63,6 +66,23 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+static int da850_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA850_MMCSD_WP_PIN);
+}
+
+static int da850_evm_mmc_get_cd(int index)
+{
+	return !gpio_get_value(DA850_MMCSD_CD_PIN);
+}
+
+static struct davinci_mmc_config da850_mmc_config = {
+	.get_ro		= da850_evm_mmc_get_ro,
+	.get_cd		= da850_evm_mmc_get_cd,
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
 static int da850_lcd_hw_init(void)
 {
 	int status;
@@ -134,6 +154,28 @@ static __init void da850_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
+	ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+	if (ret)
+		pr_warning("da850_evm_init: mmcsd0 mux setup failed: %d\n",
+				ret);
+
+	ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+	if (ret)
+		pr_warning("da850_evm_init: can not open GPIO %d\n",
+				DA850_MMCSD_CD_PIN);
+	gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+	ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+	if (ret)
+		pr_warning("da850_evm_init: can not open GPIO %d\n",
+				DA850_MMCSD_WP_PIN);
+	gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+	ret = da8xx_register_mmcsd0(&da850_mmc_config);
+	if (ret)
+		pr_warning("da850_evm_init: mmcsd0 registration failed: %d\n",
+				ret);
+
 	davinci_serial_init(&da850_evm_uart_config);
 
 	/*
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index e6e605bf151..9debd57deb7 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -304,6 +304,12 @@ static struct clk lcdc_clk = {
 	.psc_ctlr	= 1,
 };
 
+static struct clk mmcsd_clk = {
+	.name		= "mmcsd",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA8XX_LPSC0_MMC_SD,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -343,6 +349,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -434,9 +441,18 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, LCD_HSYNC,	19,	0,	15,	2,	false)
 	MUX_CFG(DA850, LCD_VSYNC,	19,	4,	15,	2,	false)
 	MUX_CFG(DA850, NLCD_AC_ENB_CS,	19,	24,	15,	2,	false)
+	/* MMC/SD0 function */
+	MUX_CFG(DA850, MMCSD0_DAT_0,	10,	8,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_1,	10,	12,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_2,	10,	16,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
+	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
 	/* GPIO function */
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
 	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
+	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
 #endif
 };
 
@@ -491,6 +507,13 @@ const short da850_lcdcntl_pins[] __initdata = {
 	-1
 };
 
+const short da850_mmcsd0_pins[] __initdata = {
+	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
+	DA850_GPIO4_0, DA850_GPIO4_1,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 094eb8ed8e7..58ad5b66fd6 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -412,3 +412,39 @@ int __init da8xx_register_lcdc(void)
 {
 	return platform_device_register(&da850_lcdc_device);
 }
+
+static struct resource da8xx_mmcsd0_resources[] = {
+	{		/* registers */
+		.start	= DA8XX_MMCSD0_BASE,
+		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{		/* interrupt */
+		.start	= IRQ_DA8XX_MMCSDINT0,
+		.end	= IRQ_DA8XX_MMCSDINT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{		/* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, 16),
+		.end	= EDMA_CTLR_CHAN(0, 16),
+		.flags	= IORESOURCE_DMA,
+	},
+	{		/* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, 17),
+		.end	= EDMA_CTLR_CHAN(0, 17),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da8xx_mmcsd0_device = {
+	.name		= "davinci_mmc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
+	.resource	= da8xx_mmcsd0_resources,
+};
+
+int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
+{
+	da8xx_mmcsd0_device.dev.platform_data = config;
+	return platform_device_register(&da8xx_mmcsd0_device);
+}
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 0af3fb6077a..0af141ffc3b 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -16,6 +16,7 @@
 #include <mach/i2c.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
+#include <mach/mmc.h>
 
 /*
  * The cp_intc interrupt controller for the da8xx isn't in the same
@@ -38,6 +39,7 @@
 #define DA8XX_GPIO_BASE		0x01e26000
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_LCD_CNTRL_BASE	0x01e13000
+#define DA8XX_MMCSD0_BASE	0x01c40000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -68,6 +70,7 @@ int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_emac(void);
 int da8xx_register_lcdc(void);
+int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
 void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
 
 extern struct platform_device da8xx_serial_device;
@@ -106,6 +109,7 @@ extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
+extern const short da850_mmcsd0_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 30bf329d537..b2335640c22 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -798,9 +798,19 @@ enum davinci_da850_index {
 	DA850_LCD_VSYNC,
 	DA850_NLCD_AC_ENB_CS,
 
+	/* MMC/SD0 function */
+	DA850_MMCSD0_DAT_0,
+	DA850_MMCSD0_DAT_1,
+	DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3,
+	DA850_MMCSD0_CLK,
+	DA850_MMCSD0_CMD,
+
 	/* GPIO function */
 	DA850_GPIO2_15,
 	DA850_GPIO8_10,
+	DA850_GPIO4_0,
+	DA850_GPIO4_1,
 };
 
 #ifdef CONFIG_DAVINCI_MUX
-- 
cgit v1.2.3


From 38beb929f2c33a37bf3af6103c064a9edfbe242b Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 16:21:11 -0400
Subject: davinci: Add NAND flash support for DA850/OMAP-L138

This patch adds platform data for the 512MB NAND Flash
found on DA850/OMAP-L138 EVM. Currently it supports
only 1-bit ECC.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 85 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 31 +++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  3 ++
 arch/arm/mach-davinci/include/mach/mux.h   | 16 ++++++
 4 files changed, 135 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index eb998ce6d46..62d37cb6f29 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -18,6 +18,10 @@
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -26,6 +30,7 @@
 #include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
+#include <mach/nand.h>
 
 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
@@ -36,6 +41,74 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
+ * (128K blocks). It may be used instead of the (default) SPI flash
+ * to boot, using TI's tools to install the secondary boot loader
+ * (UBL) and U-Boot.
+ */
+struct mtd_partition da850_evm_nandflash_partition[] = {
+	{
+		.name		= "u-boot env",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	 },
+	{
+		.name		= "UBL",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= 0x200000,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_nand_pdata da850_evm_nandflash_data = {
+	.parts		= da850_evm_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource da850_evm_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da850_evm_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
+	.resource	= da850_evm_nandflash_resource,
+};
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -45,6 +118,10 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+};
+
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -120,6 +197,14 @@ static __init void da850_evm_init(void)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
+	ret = da8xx_pinmux_setup(da850_nand_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+				ret);
+
+	platform_add_devices(da850_evm_devices,
+				ARRAY_SIZE(da850_evm_devices));
+
 	ret = da8xx_register_edma();
 	if (ret)
 		pr_warning("da850_evm_init: edma registration failed: %d\n",
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 9debd57deb7..db420941345 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -310,6 +310,13 @@ static struct clk mmcsd_clk = {
 	.lpsc		= DA8XX_LPSC0_MMC_SD,
 };
 
+static struct clk aemif_clk = {
+	.name		= "aemif",
+	.parent		= &pll0_sysclk3,
+	.lpsc		= DA8XX_LPSC0_EMIF25,
+	.flags		= ALWAYS_ENABLED,
+};
+
 static struct davinci_clk da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -350,6 +357,7 @@ static struct davinci_clk da850_clks[] = {
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
 	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
@@ -448,6 +456,21 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MMCSD0_DAT_3,	10,	20,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CLK,	10,	0,	15,	2,	false)
 	MUX_CFG(DA850, MMCSD0_CMD,	10,	4,	15,	2,	false)
+	/* EMIF2.5/EMIFA function */
+	MUX_CFG(DA850, EMA_D_7,		9,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_6,		9,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_5,		9,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_4,		9,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_3,		9,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_2,		9,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_1,		9,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_0,		9,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_1,		12,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_2,		12,	20,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_3,	7,	4,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_4,	7,	8,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_WE,		7,	16,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_OE,		7,	20,	15,	1,	false)
 	/* GPIO function */
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
 	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
@@ -514,6 +537,14 @@ const short da850_mmcsd0_pins[] __initdata = {
 	-1
 };
 
+const short da850_nand_pins[] __initdata = {
+	DA850_EMA_D_7, DA850_EMA_D_6, DA850_EMA_D_5, DA850_EMA_D_4,
+	DA850_EMA_D_3, DA850_EMA_D_2, DA850_EMA_D_1, DA850_EMA_D_0,
+	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
+	DA850_NEMA_WE, DA850_NEMA_OE,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 0af141ffc3b..77e5d2398e2 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -40,6 +40,8 @@
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_LCD_CNTRL_BASE	0x01e13000
 #define DA8XX_MMCSD0_BASE	0x01c40000
+#define DA8XX_AEMIF_CS3_BASE	0x62000000
+#define DA8XX_AEMIF_CTL_BASE	0x68000000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -110,6 +112,7 @@ extern const short da850_cpgmac_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];
+extern const short da850_nand_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index b2335640c22..ee6f29db445 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -806,6 +806,22 @@ enum davinci_da850_index {
 	DA850_MMCSD0_CLK,
 	DA850_MMCSD0_CMD,
 
+	/* EMIF2.5/EMIFA function */
+	DA850_EMA_D_7,
+	DA850_EMA_D_6,
+	DA850_EMA_D_5,
+	DA850_EMA_D_4,
+	DA850_EMA_D_3,
+	DA850_EMA_D_2,
+	DA850_EMA_D_1,
+	DA850_EMA_D_0,
+	DA850_EMA_A_1,
+	DA850_EMA_A_2,
+	DA850_NEMA_CS_3,
+	DA850_NEMA_CS_4,
+	DA850_NEMA_WE,
+	DA850_NEMA_OE,
+
 	/* GPIO function */
 	DA850_GPIO2_15,
 	DA850_GPIO8_10,
-- 
cgit v1.2.3


From 7c5ec6095a7d29c89ee050281faa068a374a5ac6 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 17:36:25 -0400
Subject: davinci: Add NOR flash support for da850/omap-l138

This patch adds platform data for the 8MB NOR flash
found on da850/omap-l138 EVM. Both NOR and NAND can
co-exist on da850/omap-l138 as they are using different
chip selects.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c    | 59 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/da850.c              | 50 +++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h |  2 +
 arch/arm/mach-davinci/include/mach/mux.h   | 34 +++++++++++++++++
 4 files changed, 145 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 62d37cb6f29..70a2f487da9 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -22,6 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +42,39 @@
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+static struct mtd_partition da850_evm_norflash_partition[] = {
+	{
+		.name           = "NOR filesystem",
+		.offset         = 0,
+		.size           = MTDPART_SIZ_FULL,
+		.mask_flags     = 0,
+	},
+};
+
+static struct physmap_flash_data da850_evm_norflash_data = {
+	.width		= 2,
+	.parts		= da850_evm_norflash_partition,
+	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
+};
+
+static struct resource da850_evm_norflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS2_BASE,
+		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da850_evm_norflash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data  = &da850_evm_norflash_data,
+	},
+	.num_resources	= 1,
+	.resource	= da850_evm_norflash_resource,
+};
+
 /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
  * (128K blocks). It may be used instead of the (default) SPI flash
  * to boot, using TI's tools to install the secondary boot loader
@@ -120,6 +154,7 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 
 static struct platform_device *da850_evm_devices[] __initdata = {
 	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
 };
 
 /* davinci da850 evm audio machine driver */
@@ -192,6 +227,23 @@ static int da850_lcd_hw_init(void)
 	return 0;
 }
 
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
 static __init void da850_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -202,6 +254,13 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
 				ret);
 
+	ret = da8xx_pinmux_setup(da850_nor_pins);
+	if (ret)
+		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+	da850_evm_init_nor();
+
 	platform_add_devices(da850_evm_devices,
 				ARRAY_SIZE(da850_evm_devices));
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index db420941345..192d719a47d 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -471,6 +471,40 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, NEMA_CS_4,	7,	8,	15,	1,	false)
 	MUX_CFG(DA850, NEMA_WE,		7,	16,	15,	1,	false)
 	MUX_CFG(DA850, NEMA_OE,		7,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_0,		12,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_3,		12,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_4,		12,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_5,		12,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_6,		12,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_7,		12,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_8,		11,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_9,		11,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_10,	11,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_11,	11,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_12,	11,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_13,	11,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_14,	11,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_15,	11,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_16,	10,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_17,	10,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_18,	10,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_19,	10,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_20,	10,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_21,	10,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_22,	10,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_A_23,	10,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_8,		8,	28,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_9,		8,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_10,	8,	20,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_11,	8,	16,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_12,	8,	12,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_13,	8,	8,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_14,	8,	4,	15,	1,	false)
+	MUX_CFG(DA850, EMA_D_15,	8,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_BA_1,	5,	24,	15,	1,	false)
+	MUX_CFG(DA850, EMA_CLK,		6,	0,	15,	1,	false)
+	MUX_CFG(DA850, EMA_WAIT_1,	6,	24,	15,	1,	false)
+	MUX_CFG(DA850, NEMA_CS_2,	7,	0,	15,	1,	false)
 	/* GPIO function */
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
 	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
@@ -545,6 +579,22 @@ const short da850_nand_pins[] __initdata = {
 	-1
 };
 
+const short da850_nor_pins[] __initdata = {
+	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
+	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
+	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
+	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
+	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
+	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
+	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
+	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
+	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
+	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
+	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
+	DA850_EMA_A_22, DA850_EMA_A_23,
+	-1
+};
+
 /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
 static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_COMMTX]		= 7,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 77e5d2398e2..d4095d0572c 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -40,6 +40,7 @@
 #define DA8XX_PSC1_BASE		0x01e27000
 #define DA8XX_LCD_CNTRL_BASE	0x01e13000
 #define DA8XX_MMCSD0_BASE	0x01c40000
+#define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
 
@@ -113,6 +114,7 @@ extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];
 extern const short da850_nand_pins[];
+extern const short da850_nor_pins[];
 
 int da8xx_pinmux_setup(const short pins[]);
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index ee6f29db445..88cd22af494 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -821,6 +821,40 @@ enum davinci_da850_index {
 	DA850_NEMA_CS_4,
 	DA850_NEMA_WE,
 	DA850_NEMA_OE,
+	DA850_EMA_D_15,
+	DA850_EMA_D_14,
+	DA850_EMA_D_13,
+	DA850_EMA_D_12,
+	DA850_EMA_D_11,
+	DA850_EMA_D_10,
+	DA850_EMA_D_9,
+	DA850_EMA_D_8,
+	DA850_EMA_A_0,
+	DA850_EMA_A_3,
+	DA850_EMA_A_4,
+	DA850_EMA_A_5,
+	DA850_EMA_A_6,
+	DA850_EMA_A_7,
+	DA850_EMA_A_8,
+	DA850_EMA_A_9,
+	DA850_EMA_A_10,
+	DA850_EMA_A_11,
+	DA850_EMA_A_12,
+	DA850_EMA_A_13,
+	DA850_EMA_A_14,
+	DA850_EMA_A_15,
+	DA850_EMA_A_16,
+	DA850_EMA_A_17,
+	DA850_EMA_A_18,
+	DA850_EMA_A_19,
+	DA850_EMA_A_20,
+	DA850_EMA_A_21,
+	DA850_EMA_A_22,
+	DA850_EMA_A_23,
+	DA850_EMA_BA_1,
+	DA850_EMA_CLK,
+	DA850_EMA_WAIT_1,
+	DA850_NEMA_CS_2,
 
 	/* GPIO function */
 	DA850_GPIO2_15,
-- 
cgit v1.2.3


From 820c4fe32ea11da338445d225cd51caa4cb69e43 Mon Sep 17 00:00:00 2001
From: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date: Thu, 13 Aug 2009 18:16:28 -0400
Subject: davinci: Handle pinmux conflict between mmc/sd and nor flash

On DA850/OMAP-L138 EVM, MMC/SD and NOR Flash share
some of the AEMIF pins. This patch prints out a warning
during booting, if both MMC/SD and NOR Flash are enabled
in kernel menuconfig.

If both MMC/SD and NOR Flash are enabled, only MMC/SD
will work correctly.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 63 ++++++++++++++++++++++-----------
 1 file changed, 42 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 70a2f487da9..f2946a0cf6f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -244,6 +244,20 @@ static void __init da850_evm_init_nor(void)
 	iounmap(aemif_addr);
 }
 
+#if defined(CONFIG_MTD_PHYSMAP) || \
+    defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
 static __init void da850_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -298,27 +312,34 @@ static __init void da850_evm_init(void)
 		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
-	if (ret)
-		pr_warning("da850_evm_init: mmcsd0 mux setup failed: %d\n",
-				ret);
-
-	ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
-	if (ret)
-		pr_warning("da850_evm_init: can not open GPIO %d\n",
-				DA850_MMCSD_CD_PIN);
-	gpio_direction_input(DA850_MMCSD_CD_PIN);
-
-	ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
-	if (ret)
-		pr_warning("da850_evm_init: can not open GPIO %d\n",
-				DA850_MMCSD_WP_PIN);
-	gpio_direction_input(DA850_MMCSD_WP_PIN);
-
-	ret = da8xx_register_mmcsd0(&da850_mmc_config);
-	if (ret)
-		pr_warning("da850_evm_init: mmcsd0 registration failed: %d\n",
-				ret);
+	if (HAS_MMC) {
+		if (HAS_NOR)
+			pr_warning("WARNING: both NOR Flash and MMC/SD are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable one of them.\n");
+
+		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
+					" %d\n", ret);
+
+		ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_CD_PIN);
+		gpio_direction_input(DA850_MMCSD_CD_PIN);
+
+		ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
+		if (ret)
+			pr_warning("da850_evm_init: can not open GPIO %d\n",
+					DA850_MMCSD_WP_PIN);
+		gpio_direction_input(DA850_MMCSD_WP_PIN);
+
+		ret = da8xx_register_mmcsd0(&da850_mmc_config);
+		if (ret)
+			pr_warning("da850_evm_init: mmcsd0 registration failed:"
+					" %d\n", ret);
+	}
 
 	davinci_serial_init(&da850_evm_uart_config);
 
-- 
cgit v1.2.3


From 1aebb50e06b8c184dcf1dde4314cb782f42f9e21 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Fri, 21 Aug 2009 12:38:11 -0400
Subject: DaVinci: DM355: Adding PINMUX entries for DM355 Display

This patch adds PINMUX entries for DM355 Display.
These will be used by the DM355 display driver.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm355.c            | 6 ++++++
 arch/arm/mach-davinci/include/mach/mux.h | 7 +++++++
 2 files changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 3abeb3eb9b2..4f42169c029 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -482,6 +482,12 @@ INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
 EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
 EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
 EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
+
+MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
+MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
+MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
+MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
+MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
 #endif
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 88cd22af494..7fad9b1a106 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -154,6 +154,13 @@ enum davinci_dm355_index {
 	DM355_EVT8_ASP1_TX,
 	DM355_EVT9_ASP1_RX,
 	DM355_EVT26_MMC0_RX,
+
+	/* Video Out */
+	DM355_VOUT_FIELD,
+	DM355_VOUT_FIELD_G70,
+	DM355_VOUT_HVSYNC,
+	DM355_VOUT_COUTL_EN,
+	DM355_VOUT_COUTH_EN,
 };
 
 enum davinci_dm365_index {
-- 
cgit v1.2.3


From 0c30e0d31b57375b1decad4cc0e139e2f7758986 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Tue, 18 Aug 2009 11:08:27 -0400
Subject: DaVinci: DM365: Adding entries for DM365 IRQ's

This patch adds definitions for some DM365 IRQs that are used by
the codecs. Codecs will also use the IRQs.
Entries are being added to enable/disable IRQ's.
There is no use as such for these entires in the kernel itself.
Instead these will be used by the "linuxutils" package of the DVSDK.

For further information on IRQ muxing refer to
http://focus.ti.com/lit/ug/sprufg5a/sprufg5a.pdf

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dm365.c             | 8 ++++++++
 arch/arm/mach-davinci/include/mach/irqs.h | 3 +++
 arch/arm/mach-davinci/include/mach/mux.h  | 8 ++++++++
 3 files changed, 19 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f8bac9486b0..e8151743470 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -595,6 +595,14 @@ INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
 INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
 INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
 INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
+INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
+INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
+INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
+INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
+INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
 #endif
 };
 
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 7f755cc387e..3c918a77261 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -205,6 +205,9 @@
 
 /* DaVinci DM365-specific Interrupts */
 #define IRQ_DM365_INSFINT	7
+#define IRQ_DM365_IMXINT1	8
+#define IRQ_DM365_IMXINT0	10
+#define IRQ_DM365_KLD_ARMINT	10
 #define IRQ_DM365_IMCOPINT	11
 #define IRQ_DM365_RTOINT	13
 #define IRQ_DM365_TINT5		14
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 7fad9b1a106..773283281be 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -301,6 +301,14 @@ enum davinci_dm365_index {
 	DM365_INT_EMAC_RXPULSE,
 	DM365_INT_EMAC_TXPULSE,
 	DM365_INT_EMAC_MISCPULSE,
+	DM365_INT_IMX0_ENABLE,
+	DM365_INT_IMX0_DISABLE,
+	DM365_INT_HDVICP_ENABLE,
+	DM365_INT_HDVICP_DISABLE,
+	DM365_INT_IMX1_ENABLE,
+	DM365_INT_IMX1_DISABLE,
+	DM365_INT_NSF_ENABLE,
+	DM365_INT_NSF_DISABLE,
 
 	/* EDMA event muxing */
 	DM365_EVT2_ASP_TX,
-- 
cgit v1.2.3


From 213765d7b40a455ced8596edfa3cc51b5f69d515 Mon Sep 17 00:00:00 2001
From: Sandeep Paulraj <s-paulraj@ti.com>
Date: Mon, 27 Jul 2009 15:10:36 -0400
Subject: DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs

For best performance, codecs often setup linked triggered
transfers with a contiguous block of params, and that is when
this API is used. Setup/configuration of these parameter RAMs
is most efficient if they are contiguous.
There is an API to allocate a set of contiguous parameter RAMs and
a corresponding API to free a set of contiguous parameter RAMs

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/dma.c               | 137 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/edma.h |   7 ++
 2 files changed, 144 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index e6d7e6aca33..f2e57d27295 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -509,6 +509,45 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+static int reserve_contiguous_params(int ctlr, unsigned int id,
+				     unsigned int num_params,
+				     unsigned int start_param)
+{
+	int i, j;
+	unsigned int count = num_params;
+
+	for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
+		j = EDMA_CHAN_SLOT(i);
+		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
+			count--;
+			if (count == 0)
+				break;
+		else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
+			break;
+		else
+			count = num_params;
+	}
+
+	/*
+	 * We have to clear any bits that we set
+	 * if we run out parameter RAMs, i.e we do find a set
+	 * of contiguous parameter RAMs but do not find the exact number
+	 * requested as we may reach the total number of parameter RAMs
+	 */
+	if (count) {
+		for (j = i - num_params + count + 1; j <= i ; ++j)
+			clear_bit(j, edma_info[ctlr]->edma_inuse);
+
+		return -EBUSY;
+	}
+
+	for (j = i - num_params + 1; j <= i; ++j)
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
+			&dummy_paramset, PARM_SIZE);
+
+	return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
+}
+
 /*-----------------------------------------------------------------------*/
 
 /* Resource alloc/free:  dma channels, parameter RAM slots */
@@ -700,6 +739,104 @@ void edma_free_slot(unsigned slot)
 }
 EXPORT_SYMBOL(edma_free_slot);
 
+
+/**
+ * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
+ * The API will return the starting point of a set of
+ * contiguous PARAM's that have been requested
+ *
+ * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
+ * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ * @count: number of contiguous Paramter RAM's
+ * @param  - the start value of Parameter RAM that should be passed if id
+ * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
+ *
+ * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
+ * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
+ * and 32 in the case of Primus
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
+ * set of contiguous parameter RAMs from the "param" that is passed as an
+ * argument to the API.
+ *
+ * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
+ * starts looking for a set of contiguous parameter RAMs from the "param"
+ * that is passed as an argument to the API. On failure the API will try to
+ * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
+ */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
+{
+	/*
+	 * The start slot requested should be greater than
+	 * the number of channels and lesser than the total number
+	 * of slots
+	 */
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots)
+		return -EINVAL;
+
+	/*
+	 * The number of parameter RAMs requested cannot be less than 1
+	 * and cannot be more than the number of slots minus the number of
+	 * channels
+	 */
+	if (count < 1 || count >
+		(edma_info[ctlr]->num_slots - edma_info[ctlr]->num_channels))
+		return -EINVAL;
+
+	switch (id) {
+	case EDMA_CONT_PARAMS_ANY:
+		return reserve_contiguous_params(ctlr, id, count,
+						 edma_info[ctlr]->num_channels);
+	case EDMA_CONT_PARAMS_FIXED_EXACT:
+	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
+		return reserve_contiguous_params(ctlr, id, count, slot);
+	default:
+		return -EINVAL;
+	}
+
+}
+EXPORT_SYMBOL(edma_alloc_cont_slots);
+
+/**
+ * edma_free_cont_slots - deallocate DMA parameter RAMs
+ * @slot: first parameter RAM of a set of parameter RAMs to be freed
+ * @count: the number of contiguous parameter RAMs to be freed
+ *
+ * This deallocates the parameter RAM slots allocated by
+ * edma_alloc_cont_slots.
+ * Callers/applications need to keep track of sets of contiguous
+ * parameter RAMs that have been allocated using the edma_alloc_cont_slots
+ * API.
+ * Callers are responsible for ensuring the slots are inactive, and will
+ * not be activated.
+ */
+int edma_free_cont_slots(unsigned slot, int count)
+{
+	unsigned ctlr;
+	int i;
+
+	ctlr = EDMA_CTLR(slot);
+	slot = EDMA_CHAN_SLOT(slot);
+
+	if (slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots ||
+		count < 1)
+		return -EINVAL;
+
+	for (i = slot; i < slot + count; ++i) {
+		ctlr = EDMA_CTLR(i);
+		slot = EDMA_CHAN_SLOT(i);
+
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+			&dummy_paramset, PARM_SIZE);
+		clear_bit(slot, edma_info[ctlr]->edma_inuse);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(edma_free_cont_slots);
+
 /*-----------------------------------------------------------------------*/
 
 /* Parameter RAM operations (i) -- read/write partial slots */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index 3c7dc2db70e..eb8bfd7925e 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -226,6 +226,9 @@ enum sync_dimension {
 
 #define EDMA_CHANNEL_ANY		-1	/* for edma_alloc_channel() */
 #define EDMA_SLOT_ANY			-1	/* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY		 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
 
 /* alloc/free DMA channels and their dedicated parameter RAM slots */
 int edma_alloc_channel(int channel,
@@ -237,6 +240,10 @@ void edma_free_channel(unsigned channel);
 int edma_alloc_slot(unsigned ctlr, int slot);
 void edma_free_slot(unsigned slot);
 
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
 /* calls that operate on part of a parameter RAM slot */
 void edma_set_src(unsigned slot, dma_addr_t src_port,
 				enum address_mode mode, enum fifo_width);
-- 
cgit v1.2.3


From 1a7ff8ff6eebfa732ca2abe00a0878136bfb2d01 Mon Sep 17 00:00:00 2001
From: Chaithrika U S <chaithrika@ti.com>
Date: Tue, 25 Aug 2009 15:20:05 +0300
Subject: davinci: audio: move tlv320aic33 i2c setup into board files

Tested on DM6446, DM355, DM6447, DA850 EVMs.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-da830-evm.c  | 3 +++
 arch/arm/mach-davinci/board-da850-evm.c  | 9 +++++++++
 arch/arm/mach-davinci/board-dm355-evm.c  | 2 +-
 arch/arm/mach-davinci/board-dm644x-evm.c | 4 +++-
 arch/arm/mach-davinci/board-dm646x-evm.c | 3 +++
 5 files changed, 19 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a45340de746..bfbb63936f3 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -41,6 +41,9 @@ static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &da830_evm_i2c_eeprom_info,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
 };
 
 static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index f2946a0cf6f..c759d72494e 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -143,6 +143,12 @@ static struct platform_device da850_evm_nandflash_device = {
 	.resource	= da850_evm_nandflash_resource,
 };
 
+static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
 	.bus_freq	= 100,	/* kHz */
 	.bus_delay	= 0,	/* usec */
@@ -343,6 +349,9 @@ static __init void da850_evm_init(void)
 
 	davinci_serial_init(&da850_evm_uart_config);
 
+	i2c_register_board_info(1, da850_evm_i2c_devices,
+			ARRAY_SIZE(da850_evm_i2c_devices));
+
 	/*
 	 * shut down uart 0 and 1; they are not used on the board and
 	 * accessing them causes endless "too much work in irq53" messages
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 38157f78e1a..9f25fd8ca4a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -139,7 +139,7 @@ static struct i2c_board_info dm355evm_i2c_info[] = {
 	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
 		.platform_data = dm355evm_mmcsd_gpios,
 		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
 	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
 };
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 6a27c5db328..31cf84fbb01 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -559,8 +559,10 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x1b),
+	},
 	/* ALSO:
-	 * - tvl320aic33 audio codec (0x1b)
 	 * - tvp5146 video decoder (0x5d)
 	 */
 };
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index cb30afe2205..20547049b48 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -299,6 +299,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("cpld_reg0", 0x3a),
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x18),
+	}
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
-- 
cgit v1.2.3


From 680b6cfd3cee30a7d997d49430fb73af84523853 Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Date: Wed, 26 Aug 2009 16:20:36 +0900
Subject: x86, mce: CE in last bank prevents panic by unknown MCE

If MCE handler is called but none of mces_seen have machine
check event which might signal the MCE (i.e. event higher than
MCE_KEEP_SEVERITY), panic with "Machine check from unknown
source" will be taken since the MCE is assumed to be signaled
from external agent or so.

Usually mces_seen never point MCE_KEEP_SEVERITY event such as
CE. But it can happen because initial value of mces_seen is
accidentally modified by mce_no_way_out() - in case if
mce_no_way_out() run through all banks and the last bank has
the CE, mces_seen points the CE and the "panic by unknown" will
not be taken.

This patch fixes this undesired behavior, and clarifies the logic.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Dongming <jin.dongming@np.css.fujitsu.com>
LKML-Reference: <4A94E244.3020301@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 54bd1b2fb4c..325559d1aa5 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -612,7 +612,7 @@ out:
  * This way we prevent any potential data corruption in a unrecoverable case
  * and also makes sure always all CPU's errors are examined.
  *
- * Also this detects the case of an machine check event coming from outer
+ * Also this detects the case of a machine check event coming from outer
  * space (not detected by any CPUs) In this case some external agent wants
  * us to shut down, so panic too.
  *
@@ -665,7 +665,7 @@ static void mce_reign(void)
 	 * No machine check event found. Must be some external
 	 * source or one CPU is hung. Panic.
 	 */
-	if (!m && tolerant < 3)
+	if (global_worst <= MCE_KEEP_SEVERITY && tolerant < 3)
 		mce_panic("Machine check from unknown source", NULL, NULL);
 
 	/*
@@ -889,11 +889,11 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	mce_setup(&m);
 
 	m.mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
-	no_way_out = mce_no_way_out(&m, &msg);
-
 	final = &__get_cpu_var(mces_seen);
 	*final = m;
 
+	no_way_out = mce_no_way_out(&m, &msg);
+
 	barrier();
 
 	/*
-- 
cgit v1.2.3


From d3a247bfb2c26f5b67367d58af7ad8c2efbbc6c1 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Wed, 26 Aug 2009 21:13:24 +0400
Subject: x86, apic: Slim down stack usage in early_init_lapic_mapping()

As far as I see there is no external poking of mp_lapic_addr in
this procedure which could lead to unpredited changes and
require local storage unit for it. Lets use it plain forward.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090826171324.GC4548@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3fc3a6c428d..159740decc4 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1562,8 +1562,6 @@ no_apic:
 #ifdef CONFIG_X86_64
 void __init early_init_lapic_mapping(void)
 {
-	unsigned long phys_addr;
-
 	/*
 	 * If no local APIC can be found then go out
 	 * : it means there is no mpatable and MADT
@@ -1571,11 +1569,9 @@ void __init early_init_lapic_mapping(void)
 	if (!smp_found_config)
 		return;
 
-	phys_addr = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
 	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-		    APIC_BASE, phys_addr);
+		    APIC_BASE, mp_lapic_addr);
 
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
-- 
cgit v1.2.3


From 7515bf59f87f19b2a17972b74230d2f91756fe3c Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Tue, 25 Aug 2009 14:31:11 +0200
Subject: tracing: Add syscall tracepoints - s390 arch update

This patch includes s390 arch updates to synchronize with latest
core changes in the syscalls tracing area.

- tracing: Map syscall name to number (syscall_name_to_nr())
- tracing: Call arch_init_ftrace_syscalls at boot
- tracing: add support tracepoint ids (set_syscall_{enter,exit}_id())

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
LKML-Reference: <20090825123111.GD4639@cetus.boeblingen.de.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/s390/kernel/ftrace.c | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 3e298e64f0d..57bdcb1e3cd 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -220,6 +220,29 @@ struct syscall_metadata *syscall_nr_to_meta(int nr)
 	return syscalls_metadata[nr];
 }
 
+int syscall_name_to_nr(char *name)
+{
+	int i;
+
+	if (!syscalls_metadata)
+		return -1;
+	for (i = 0; i < NR_syscalls; i++)
+		if (syscalls_metadata[i])
+			if (!strcmp(syscalls_metadata[i]->name, name))
+				return i;
+	return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+	syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+	syscalls_metadata[num]->exit_id = id;
+}
+
 static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
 {
 	struct syscall_metadata *start;
@@ -237,24 +260,19 @@ static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
 	return NULL;
 }
 
-void arch_init_ftrace_syscalls(void)
+static int __init arch_init_ftrace_syscalls(void)
 {
 	struct syscall_metadata *meta;
 	int i;
-	static atomic_t refs;
-
-	if (atomic_inc_return(&refs) != 1)
-		goto out;
 	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls,
 				    GFP_KERNEL);
 	if (!syscalls_metadata)
-		goto out;
+		return -ENOMEM;
 	for (i = 0; i < NR_syscalls; i++) {
 		meta = find_syscall_meta((unsigned long)sys_call_table[i]);
 		syscalls_metadata[i] = meta;
 	}
-	return;
-out:
-	atomic_dec(&refs);
+	return 0;
 }
+arch_initcall(arch_init_ftrace_syscalls);
 #endif
-- 
cgit v1.2.3


From dd86dda24cc1dc70031a7d9250dc3c0c430a50e2 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 24 Aug 2009 17:40:14 -0400
Subject: tracing: Define NR_syscalls for x86 (32)

Add a NR_syscalls #define for x86. This is used in the syscall events
tracing code. Todo: make it dynamic like x86_64.

NR_syscalls is the usual name used to determine the number of syscalls
supported by the current arch. We want to unify the use of this number
across archs that support the syscall tracing. This also prepare to move
some of the arch code to core code in the syscall tracing area.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Josh Stone <jistone@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anwin <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <0f33c0f96d198fccc3ddd9ff7f5334ff5cb42706.1251146513.git.jbaron@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/include/asm/unistd_32.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 732a3070615..8deaada61bc 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -345,6 +345,8 @@
 
 #ifdef __KERNEL__
 
+#define NR_syscalls 337
+
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT
-- 
cgit v1.2.3


From a5a2f8e2acb991327952c45a13f5441fc09dffd6 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Wed, 26 Aug 2009 12:09:10 -0400
Subject: tracing: Define NR_syscalls for x86_64

Express the available number of syscalls in a standard way by defining
NR_syscalls.

The common way to define it is to place its definition in asm/unistd.h
However, the number of syscalls is defined using __NR_syscall_max in
x86-64 after building a dynamic header file "asm-offsets.h"

The source file that generates this header, asm-offsets-64.c includes
unistd.h, then if we want to express NR_syscalls from __NR_syscall_max
in unistd.h only after generating the dynamic header file, we need a
watchguard.

If unistd.h is included from asm-offsets-64.c, then we are generating
asm-offset.h which defines __NR_syscall_max. At this time, we don't
want to (we can't) define NR_syscalls, then we do nothing.
Otherwise we define NR_syscalls because we know asm-offsets.h has
been generated.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Josh Stone <jistone@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anwin <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <20090826160910.GB2658@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/include/asm/unistd_64.h | 6 ++++++
 arch/x86/kernel/asm-offsets_64.c | 1 +
 2 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 900e1617e67..b9f3c60de5f 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -688,6 +688,12 @@ __SYSCALL(__NR_perf_counter_open, sys_perf_counter_open)
 #endif	/* __NO_STUBS */
 
 #ifdef __KERNEL__
+
+#ifndef COMPILE_OFFSETS
+#include <asm/asm-offsets.h>
+#define NR_syscalls (__NR_syscall_max + 1)
+#endif
+
 /*
  * "Conditional" syscalls
  *
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 898ecc47e12..4a6aeedcd96 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -3,6 +3,7 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/crypto.h>
 #include <linux/sched.h> 
-- 
cgit v1.2.3


From 57421dbbdc932d65f0e6a41ebb027a2bfe3d0669 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 24 Aug 2009 17:40:22 -0400
Subject: tracing: Convert event tracing code to use NR_syscalls

Convert the syscalls event tracing code to use NR_syscalls, instead of
FTRACE_SYSCALL_MAX. NR_syscalls is standard accross most arches, and
reduces code confusion/complexity.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Josh Stone <jistone@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anwin <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <9b4f1a84ecae57cc6599412772efa36f0d2b815b.1251146513.git.jbaron@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/kernel/ftrace.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 3cff1214e17..9dbb527e165 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -494,7 +494,7 @@ static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
 
 struct syscall_metadata *syscall_nr_to_meta(int nr)
 {
-	if (!syscalls_metadata || nr >= FTRACE_SYSCALL_MAX || nr < 0)
+	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
 		return NULL;
 
 	return syscalls_metadata[nr];
@@ -507,7 +507,7 @@ int syscall_name_to_nr(char *name)
 	if (!syscalls_metadata)
 		return -1;
 
-	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
+	for (i = 0; i < NR_syscalls; i++) {
 		if (syscalls_metadata[i]) {
 			if (!strcmp(syscalls_metadata[i]->name, name))
 				return i;
@@ -533,13 +533,13 @@ static int __init arch_init_ftrace_syscalls(void)
 	unsigned long **psys_syscall_table = &sys_call_table;
 
 	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
-					FTRACE_SYSCALL_MAX, GFP_KERNEL);
+					NR_syscalls, GFP_KERNEL);
 	if (!syscalls_metadata) {
 		WARN_ON(1);
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
+	for (i = 0; i < NR_syscalls; i++) {
 		meta = find_syscall_meta(psys_syscall_table[i]);
 		syscalls_metadata[i] = meta;
 	}
-- 
cgit v1.2.3


From 117226d15850387b55fd01675917ee4fcb9699e8 Mon Sep 17 00:00:00 2001
From: Jason Baron <jbaron@redhat.com>
Date: Mon, 24 Aug 2009 17:40:26 -0400
Subject: tracing: Remove FTRACE_SYSCALL_MAX definitions

Remove the FTRACE_SYSCALL_MAX definitions now that we have converted the
syscall event tracing code to use NR_syscalls.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Josh Stone <jistone@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anwin <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <f2240cdc8f0b1ca7617390c8f5ec90ba2bd348cf.1251146513.git.jbaron@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 arch/x86/include/asm/ftrace.h | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index 71136545187..db24c2278be 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -28,13 +28,6 @@
 
 #endif
 
-/* FIXME: I don't want to stay hardcoded */
-#ifdef CONFIG_X86_64
-# define FTRACE_SYSCALL_MAX     299
-#else
-# define FTRACE_SYSCALL_MAX     337
-#endif
-
 #ifdef CONFIG_FUNCTION_TRACER
 #define MCOUNT_ADDR		((long)(mcount))
 #define MCOUNT_INSN_SIZE	5 /* sizeof mcount call */
-- 
cgit v1.2.3


From dd9b3e84f2095ed19582f4df5d20e1e40c01ca3c Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Wed, 17 Jun 2009 13:13:57 -0700
Subject: m68k: cnt reaches -1, not 0

With the postfix decrement cnt reaches -1 rather than 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/amiga/config.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 6e562751ad5..6c74751c7b8 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -574,10 +574,11 @@ static int a2000_hwclk(int op, struct rtc_time *t)
 
 	tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
 
-	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
 		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
 		udelay(70);
 		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+		--cnt;
 	}
 
 	if (!cnt)
@@ -649,10 +650,11 @@ static int amiga_set_clock_mmss(unsigned long nowtime)
 
 		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
 
-		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
 			tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
 			udelay(70);
 			tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+			--cnt;
 		}
 
 		if (!cnt)
-- 
cgit v1.2.3


From dc71c7d5dbd8cd8bb6e3b548ddc0454b64ded5f8 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 17 Jun 2009 13:13:58 -0700
Subject: arch/m68k/include/asm/motorola_pgalloc.h: fix kunmap arg

arch/m68k/include/asm/motorola_pgalloc.h: In function 'pte_alloc_one':
arch/m68k/include/asm/motorola_pgalloc.h:44: warning: passing argument 1 of 'kunmap' from incompatible pointer type

Also, remove unneeded test for kmap() failure.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/include/asm/motorola_pgalloc.h | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index 15ee4c74a9f..2f02f264e69 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -36,12 +36,10 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addres
 		return NULL;
 
 	pte = kmap(page);
-	if (pte) {
-		__flush_page_to_ram(pte);
-		flush_tlb_kernel_page(pte);
-		nocache_page(pte);
-	}
-	kunmap(pte);
+	__flush_page_to_ram(pte);
+	flush_tlb_kernel_page(pte);
+	nocache_page(pte);
+	kunmap(page);
 	pgtable_page_ctor(page);
 	return page;
 }
-- 
cgit v1.2.3


From 9fd926b4ab1e38ac5e3eb3ba0afb56726d90aa88 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 9 Jul 2009 17:08:38 +0400
Subject: m68k: Fix redefinition of pgprot_noncached

arch/m68k/include/asm/pgtable_mm.h:148:1: warning: "pgprot_noncached" redefined
In file included from arch/m68k/include/asm/pgtable_mm.h:138,
                 from arch/m68k/include/asm/pgtable.h:4,
                 from include/linux/mm.h:40,
                 from include/linux/pagemap.h:7,
                 from include/linux/blkdev.h:12,
                 from arch/m68k/emu/nfblock.c:17:
include/asm-generic/pgtable.h:133:1: warning: this is the location of the previous definition

pgprot_noncached() should be defined _before_ including asm-generic/pgtable.h

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/include/asm/pgtable_mm.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 0b604f0f192..fe60e1abaee 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -135,8 +135,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 #endif
 
 #ifndef __ASSEMBLY__
-#include <asm-generic/pgtable.h>
-
 /*
  * Macro to mark a page protection value as "uncacheable".
  */
@@ -154,6 +152,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 	    ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))	\
 	    : (prot)))
 
+#include <asm-generic/pgtable.h>
 #endif /* !__ASSEMBLY__ */
 
 /*
-- 
cgit v1.2.3


From 9848484fad9ddeb18f18f02f9ecdcd330ac9a216 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Fri, 21 Aug 2009 22:03:54 +0200
Subject: m68k,m68knommu: Wire up rt_tgsigqueueinfo and perf_counter_open

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/unistd.h       | 4 +++-
 arch/m68k/kernel/entry.S             | 2 ++
 arch/m68knommu/kernel/syscalltable.S | 2 ++
 3 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index aa29a8640f7..946d8691f2b 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -334,10 +334,12 @@
 #define __NR_inotify_init1	328
 #define __NR_preadv		329
 #define __NR_pwritev		330
+#define __NR_rt_tgsigqueueinfo	331
+#define __NR_perf_counter_open	332
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		331
+#define NR_syscalls		333
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 8744f60c07a..c3735cd6207 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -755,4 +755,6 @@ sys_call_table:
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 330 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index c0b8782832f..0ae123e0898 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -349,6 +349,8 @@ ENTRY(sys_call_table)
 	.long sys_inotify_init1
 	.long sys_preadv
 	.long sys_pwritev		/* 330 */
+	.long sys_rt_tgsigqueueinfo
+	.long sys_perf_counter_open
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
-- 
cgit v1.2.3


From 5fc517466dd3d0fc6d2a5180ca6792e60344d8be Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:32 -0700
Subject: x86, pat: Keep identity maps consistent with mmaps even when
 pat_disabled

Make reserve_memtype internally take care of pat disabled case and fallback
to default return values.

Remove the specific pat_disabled checks in track_* routines.

Change kernel_map_sync_memtype to sync identity map even when
pat_disabled.

This change ensures that, even for pat_disabled case, we take care of
keeping identity map in sync. Before this patch, in pat disabled case,
ioremap() keeps the identity maps in sync and other APIs like pci and
/dev/mem mmap don't, which is not a very consistent behavior.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb2806..d5af2792d2f 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -339,6 +339,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		if (new_type) {
 			if (req_type == -1)
 				*new_type = _PAGE_CACHE_WB;
+			else if (req_type == _PAGE_CACHE_WC)
+				*new_type = _PAGE_CACHE_UC_MINUS;
 			else
 				*new_type = req_type & _PAGE_CACHE_MASK;
 		}
@@ -577,7 +579,7 @@ int kernel_map_sync_memtype(u64 base, unsigned long size, unsigned long flags)
 {
 	unsigned long id_sz;
 
-	if (!pat_enabled || base >= __pa(high_memory))
+	if (base >= __pa(high_memory))
 		return 0;
 
 	id_sz = (__pa(high_memory) < base + size) ?
@@ -677,9 +679,6 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 	pgprot_t pgprot;
 
-	if (!pat_enabled)
-		return 0;
-
 	/*
 	 * For now, only handle remap_pfn_range() vmas where
 	 * is_linear_pfn_mapping() == TRUE. Handling of
@@ -715,9 +714,6 @@ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	if (!pat_enabled)
-		return 0;
-
 	/*
 	 * For now, only handle remap_pfn_range() vmas where
 	 * is_linear_pfn_mapping() == TRUE. Handling of
@@ -743,9 +739,6 @@ void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	if (!pat_enabled)
-		return;
-
 	/*
 	 * For now, only handle remap_pfn_range() vmas where
 	 * is_linear_pfn_mapping() == TRUE. Handling of
-- 
cgit v1.2.3


From 279e669b3fc0068cc3509e8e53036999e1e86588 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:33 -0700
Subject: x86, pat: ioremap to follow same PAT restrictions as other PAT users

ioremap has this hard-coded check for new type and requested type. That
check differs from other PAT users like /dev/mem mmap, remap_pfn_range
in only one condition where requested type is UC_MINUS and new type
is WC. Under that condition, ioremap fails. But other PAT interfaces succeed
with a WC mapping.

Change to make ioremap be in sync with other PAT APIs and use the same
macro as others. Also changes the error print to KERN_ERR instead of
pr_debug.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/ioremap.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 8a450930834..aeaea8c5b2f 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -228,24 +228,13 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
 						prot_val, &new_prot_val);
 	if (retval) {
-		pr_debug("Warning: reserve_memtype returned %d\n", retval);
+		printk(KERN_ERR "ioremap reserve_memtype failed %d\n", retval);
 		return NULL;
 	}
 
 	if (prot_val != new_prot_val) {
-		/*
-		 * Do not fallback to certain memory types with certain
-		 * requested type:
-		 * - request is uc-, return cannot be write-back
-		 * - request is uc-, return cannot be write-combine
-		 * - request is write-combine, return cannot be write-back
-		 */
-		if ((prot_val == _PAGE_CACHE_UC_MINUS &&
-		     (new_prot_val == _PAGE_CACHE_WB ||
-		      new_prot_val == _PAGE_CACHE_WC)) ||
-		    (prot_val == _PAGE_CACHE_WC &&
-		     new_prot_val == _PAGE_CACHE_WB)) {
-			pr_debug(
+		if (!is_new_memtype_allowed(prot_val, new_prot_val)) {
+			printk(KERN_ERR
 		"ioremap error for 0x%llx-0x%llx, requested 0x%lx, got 0x%lx\n",
 				(unsigned long long)phys_addr,
 				(unsigned long long)(phys_addr + size),
-- 
cgit v1.2.3


From 9fd126bc742f74a95d2ba610247712ff05da02fe Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:34 -0700
Subject: x86, pat: New i/f for driver to request memtype for IO regions

Add new routines to request memtype for IO regions. This will currently
be a backend for io_mapping_* routines. But, it can also be made available
to drivers directly in future, in case it is needed.

reserve interface reserves the memory, makes sure we have a compatible
memory type available and keeps the identity map in sync when needed.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/pat.h |  5 +++++
 arch/x86/mm/pat.c          | 49 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 7af14e512f9..e2c1668dde7 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -19,4 +19,9 @@ extern int free_memtype(u64 start, u64 end);
 extern int kernel_map_sync_memtype(u64 base, unsigned long size,
 		unsigned long flag);
 
+int io_reserve_memtype(resource_size_t start, resource_size_t end,
+			unsigned long *type);
+
+void io_free_memtype(resource_size_t start, resource_size_t end);
+
 #endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index d5af2792d2f..82d097ce309 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -498,6 +498,55 @@ int free_memtype(u64 start, u64 end)
 }
 
 
+/**
+ * io_reserve_memtype - Request a memory type mapping for a region of memory
+ * @start: start (physical address) of the region
+ * @end: end (physical address) of the region
+ * @type: A pointer to memtype, with requested type. On success, requested
+ * or any other compatible type that was available for the region is returned
+ *
+ * On success, returns 0
+ * On failure, returns non-zero
+ */
+int io_reserve_memtype(resource_size_t start, resource_size_t end,
+			unsigned long *type)
+{
+	unsigned long req_type = *type;
+	unsigned long new_type;
+	int ret;
+
+	WARN_ON_ONCE(iomem_map_sanity_check(start, end - start));
+
+	ret = reserve_memtype(start, end, req_type, &new_type);
+	if (ret)
+		goto out_err;
+
+	if (!is_new_memtype_allowed(req_type, new_type))
+		goto out_free;
+
+	if (kernel_map_sync_memtype(start, end - start, new_type) < 0)
+		goto out_free;
+
+	*type = new_type;
+	return 0;
+
+out_free:
+	free_memtype(start, end);
+	ret = -EBUSY;
+out_err:
+	return ret;
+}
+
+/**
+ * io_free_memtype - Release a memory type mapping for a region of memory
+ * @start: start (physical address) of the region
+ * @end: end (physical address) of the region
+ */
+void io_free_memtype(resource_size_t start, resource_size_t end)
+{
+	free_memtype(start, end);
+}
+
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t vma_prot)
 {
-- 
cgit v1.2.3


From 9e36fda0b359d2a6ae039c3d7e71a04502a77898 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:35 -0700
Subject: x86, pat: Add PAT reserve free to io_mapping* APIs

io_mapping_* interfaces were added, mainly for graphics drivers.
Make this interface go through the PAT reserve/free, instead of
hardcoding WC mapping. This makes sure that there are no
aliases due to unconditional WC setting.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/iomap.h |  9 ++++++---
 arch/x86/mm/iomap_32.c       | 27 +++++++++++++++++++++++++--
 2 files changed, 31 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h
index 0e9fe1d9d97..f35eb45d657 100644
--- a/arch/x86/include/asm/iomap.h
+++ b/arch/x86/include/asm/iomap.h
@@ -26,13 +26,16 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
-int
-is_io_mapping_possible(resource_size_t base, unsigned long size);
-
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 
 void
 iounmap_atomic(void *kvaddr, enum km_type type);
 
+int
+iomap_create_wc(resource_size_t base, unsigned long size, pgprot_t *prot);
+
+void
+iomap_free(resource_size_t base, unsigned long size);
+
 #endif /* _ASM_X86_IOMAP_H */
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index fe6f84ca121..84e236ce76b 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -21,7 +21,7 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
 
-int is_io_mapping_possible(resource_size_t base, unsigned long size)
+static int is_io_mapping_possible(resource_size_t base, unsigned long size)
 {
 #if !defined(CONFIG_X86_PAE) && defined(CONFIG_PHYS_ADDR_T_64BIT)
 	/* There is no way to map greater than 1 << 32 address without PAE */
@@ -30,7 +30,30 @@ int is_io_mapping_possible(resource_size_t base, unsigned long size)
 #endif
 	return 1;
 }
-EXPORT_SYMBOL_GPL(is_io_mapping_possible);
+
+int iomap_create_wc(resource_size_t base, unsigned long size, pgprot_t *prot)
+{
+	unsigned long flag = _PAGE_CACHE_WC;
+	int ret;
+
+	if (!is_io_mapping_possible(base, size))
+		return -EINVAL;
+
+	ret = io_reserve_memtype(base, base + size, &flag);
+	if (ret)
+		return ret;
+
+	*prot = __pgprot(__PAGE_KERNEL | flag);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iomap_create_wc);
+
+void
+iomap_free(resource_size_t base, unsigned long size)
+{
+	io_free_memtype(base, base + size);
+}
+EXPORT_SYMBOL_GPL(iomap_free);
 
 void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 {
-- 
cgit v1.2.3


From 335ef896d4c6639849d79367f0fef9abc06d121b Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:36 -0700
Subject: x86, pat: Add rbtree to do quick lookup in memtype tracking

PAT memtype tracking uses a linear link list to keep track of IO
(non-RAM) regions and their memtypes. The code used a last_accessed
pointer as a cache to speedup the lookup. As per discussions with
H. Peter Anvin a while back, having a rbtree here will avoid bad
performances in pathological cases where we may end up with huge
linked list. This may not add any noticable performance speedup
in normal case as the number of entires in PAT memtype list tend
to be ~20-30 range. The patch removes the "cached_entry" logic
as with rbtree we have more generic way of speeding up the lookup.

With this patch, we use rbtree to do the quick lookup. We still use
linked list as the memtype range tracked can be of different sizes
and can overlap in different ways. We also keep track of usage counts
with linked list.

Example:
Multiple ioremaps with different sizes
uncached-minus @ 0xfffff00000-0xfffff04000
uncached-minus @ 0xfffff02000-0xfffff03000

And one userlevel mmap and the thread forks a new process
uncached-minus @ 0xbf453000-0xbf454000
uncached-minus @ 0xbf453000-0xbf454000

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 106 +++++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 86 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 82d097ce309..c90f2420f56 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -15,6 +15,7 @@
 #include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
+#include <linux/rbtree.h>
 
 #include <asm/cacheflush.h>
 #include <asm/processor.h>
@@ -148,11 +149,10 @@ static char *cattr_name(unsigned long flags)
  * areas). All the aliases have the same cache attributes of course.
  * Zero attributes are represented as holes.
  *
- * Currently the data structure is a list because the number of mappings
- * are expected to be relatively small. If this should be a problem
- * it could be changed to a rbtree or similar.
+ * The data structure is a list that is also organized as an rbtree
+ * sorted on the start address of memtype range.
  *
- * memtype_lock protects the whole list.
+ * memtype_lock protects both the linear list and rbtree.
  */
 
 struct memtype {
@@ -160,11 +160,53 @@ struct memtype {
 	u64			end;
 	unsigned long		type;
 	struct list_head	nd;
+	struct rb_node		rb;
 };
 
+static struct rb_root memtype_rbroot = RB_ROOT;
 static LIST_HEAD(memtype_list);
 static DEFINE_SPINLOCK(memtype_lock);	/* protects memtype list */
 
+static struct memtype *memtype_rb_search(struct rb_root *root, u64 start)
+{
+	struct rb_node *node = root->rb_node;
+	struct memtype *last_lower = NULL;
+
+	while (node) {
+		struct memtype *data = container_of(node, struct memtype, rb);
+
+		if (data->start < start) {
+			last_lower = data;
+			node = node->rb_right;
+		} else if (data->start > start) {
+			node = node->rb_left;
+		} else
+			return data;
+	}
+
+	/* Will return NULL if there is no entry with its start <= start */
+	return last_lower;
+}
+
+static void memtype_rb_insert(struct rb_root *root, struct memtype *data)
+{
+	struct rb_node **new = &(root->rb_node);
+	struct rb_node *parent = NULL;
+
+	while (*new) {
+		struct memtype *this = container_of(*new, struct memtype, rb);
+
+		parent = *new;
+		if (data->start <= this->start)
+			new = &((*new)->rb_left);
+		else if (data->start > this->start)
+			new = &((*new)->rb_right);
+	}
+
+	rb_link_node(&data->rb, parent, new);
+	rb_insert_color(&data->rb, root);
+}
+
 /*
  * Does intersection of PAT memory type and MTRR memory type and returns
  * the resulting memory type as PAT understands it.
@@ -218,9 +260,6 @@ chk_conflict(struct memtype *new, struct memtype *entry, unsigned long *type)
 	return -EBUSY;
 }
 
-static struct memtype *cached_entry;
-static u64 cached_start;
-
 static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
 {
 	int ram_page = 0, not_rampage = 0;
@@ -382,17 +421,19 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
-	if (cached_entry && start >= cached_start)
-		entry = cached_entry;
-	else
+	entry = memtype_rb_search(&memtype_rbroot, new->start);
+	if (likely(entry != NULL)) {
+		/* To work correctly with list_for_each_entry_continue */
+		entry = list_entry(entry->nd.prev, struct memtype, nd);
+	} else {
 		entry = list_entry(&memtype_list, struct memtype, nd);
+	}
 
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
 	list_for_each_entry_continue(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
-			cached_entry = list_entry(where, struct memtype, nd);
 			break;
 		} else if (start <= entry->start) { /* end > entry->start */
 			err = chk_conflict(new, entry, new_type);
@@ -400,8 +441,6 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
 				where = entry->nd.prev;
-				cached_entry = list_entry(where,
-							struct memtype, nd);
 			}
 			break;
 		} else if (start < entry->end) { /* start > entry->start */
@@ -409,8 +448,6 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 			if (!err) {
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
-				cached_entry = list_entry(entry->nd.prev,
-							struct memtype, nd);
 
 				/*
 				 * Move to right position in the linked
@@ -438,13 +475,13 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return err;
 	}
 
-	cached_start = start;
-
 	if (where)
 		list_add(&new->nd, where);
 	else
 		list_add_tail(&new->nd, &memtype_list);
 
+	memtype_rb_insert(&memtype_rbroot, new);
+
 	spin_unlock(&memtype_lock);
 
 	dprintk("reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n",
@@ -456,7 +493,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 int free_memtype(u64 start, u64 end)
 {
-	struct memtype *entry;
+	struct memtype *entry, *saved_entry;
 	int err = -EINVAL;
 	int is_range_ram;
 
@@ -474,17 +511,46 @@ int free_memtype(u64 start, u64 end)
 		return -EINVAL;
 
 	spin_lock(&memtype_lock);
+
+	entry = memtype_rb_search(&memtype_rbroot, start);
+	if (unlikely(entry == NULL))
+		goto unlock_ret;
+
+	/*
+	 * Saved entry points to an entry with start same or less than what
+	 * we searched for. Now go through the list in both directions to look
+	 * for the entry that matches with both start and end, with list stored
+	 * in sorted start address
+	 */
+	saved_entry = entry;
 	list_for_each_entry(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
-			if (cached_entry == entry || cached_start == start)
-				cached_entry = NULL;
+			rb_erase(&entry->rb, &memtype_rbroot);
+			list_del(&entry->nd);
+			kfree(entry);
+			err = 0;
+			break;
+		} else if (entry->start > start) {
+			break;
+		}
+	}
+
+	if (!err)
+		goto unlock_ret;
 
+	entry = saved_entry;
+	list_for_each_entry_reverse(entry, &memtype_list, nd) {
+		if (entry->start == start && entry->end == end) {
+			rb_erase(&entry->rb, &memtype_rbroot);
 			list_del(&entry->nd);
 			kfree(entry);
 			err = 0;
 			break;
+		} else if (entry->start < start) {
+			break;
 		}
 	}
+unlock_ret:
 	spin_unlock(&memtype_lock);
 
 	if (err) {
-- 
cgit v1.2.3


From 46cf98cdaef5471926010b5bddf84c44ec177fdd Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:37 -0700
Subject: x86, pat: Generalize the use of page flag PG_uncached

Only IA64 was using PG_uncached as of now. We now intend to use this bit
in x86 as well, to keep track of memory type of those addresses that
have page struct for them. So, generalize the use of that bit across
ia64 and x86.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/ia64/Kconfig | 4 ++++
 arch/x86/Kconfig  | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 170042b420d..e6246119932 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -112,6 +112,10 @@ config IA64_UNCACHED_ALLOCATOR
 	bool
 	select GENERIC_ALLOCATOR
 
+config ARCH_USES_PG_UNCACHED
+	def_bool y
+	depends on IA64_UNCACHED_ALLOCATOR
+
 config AUDIT_ARCH
 	bool
 	default y
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c07f7220590..8e159538219 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1414,6 +1414,10 @@ config X86_PAT
 
 	  If unsure, say Y.
 
+config ARCH_USES_PG_UNCACHED
+	def_bool y
+	depends on X86_PAT
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
-- 
cgit v1.2.3


From f58417409603d62f2eb23db4d2cf6853d84a1698 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:38 -0700
Subject: x86, pat: Use page flags to track memtypes of RAM pages

Change reserve_ram_pages_type and free_ram_pages_type to use 2 page
flags to track UC_MINUS, WC, WB and default types. Previous RAM tracking
just tracked WB or NonWB, which was not complete and did not allow
tracking of RAM fully and there was no way to get the actual type
reserved by looking at the page flags.

We use the memtype_lock spinlock for atomicity in dealing with
memtype tracking in struct page.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/cacheflush.h | 54 ++++++++++++++++++++++-
 arch/x86/mm/pat.c                 | 91 +++++++++++++++++++++------------------
 2 files changed, 102 insertions(+), 43 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index e55dfc1ad45..b54f6afe7ec 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -43,8 +43,58 @@ static inline void copy_from_user_page(struct vm_area_struct *vma,
 	memcpy(dst, src, len);
 }
 
-#define PG_non_WB				PG_arch_1
-PAGEFLAG(NonWB, non_WB)
+#define PG_WC				PG_arch_1
+PAGEFLAG(WC, WC)
+
+#ifdef CONFIG_X86_PAT
+/*
+ * X86 PAT uses page flags WC and Uncached together to keep track of
+ * memory type of pages that have backing page struct. X86 PAT supports 3
+ * different memory types, _PAGE_CACHE_WB, _PAGE_CACHE_WC and
+ * _PAGE_CACHE_UC_MINUS and fourth state where page's memory type has not
+ * been changed from its default (value of -1 used to denote this).
+ * Note we do not support _PAGE_CACHE_UC here.
+ *
+ * Caller must hold memtype_lock for atomicity.
+ */
+static inline unsigned long get_page_memtype(struct page *pg)
+{
+	if (!PageUncached(pg) && !PageWC(pg))
+		return -1;
+	else if (!PageUncached(pg) && PageWC(pg))
+		return _PAGE_CACHE_WC;
+	else if (PageUncached(pg) && !PageWC(pg))
+		return _PAGE_CACHE_UC_MINUS;
+	else
+		return _PAGE_CACHE_WB;
+}
+
+static inline void set_page_memtype(struct page *pg, unsigned long memtype)
+{
+	switch (memtype) {
+	case _PAGE_CACHE_WC:
+		ClearPageUncached(pg);
+		SetPageWC(pg);
+		break;
+	case _PAGE_CACHE_UC_MINUS:
+		SetPageUncached(pg);
+		ClearPageWC(pg);
+		break;
+	case _PAGE_CACHE_WB:
+		SetPageUncached(pg);
+		SetPageWC(pg);
+		break;
+	default:
+	case -1:
+		ClearPageUncached(pg);
+		ClearPageWC(pg);
+		break;
+	}
+}
+#else
+static inline unsigned long get_page_memtype(struct page *pg) { return -1; }
+static inline void set_page_memtype(struct page *pg, unsigned long memtype) { }
+#endif
 
 /*
  * The set_memory_* API can be used to change various attributes of a virtual
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index c90f2420f56..1a9d0f07593 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -288,63 +288,61 @@ static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
 }
 
 /*
- * For RAM pages, mark the pages as non WB memory type using
- * PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
- * set_memory_wc() on a RAM page at a time before marking it as WB again.
- * This is ok, because only one driver will be owning the page and
- * doing set_memory_*() calls.
+ * For RAM pages, we use page flags to mark the pages with appropriate type.
+ * Here we do two pass:
+ * - Find the memtype of all the pages in the range, look for any conflicts
+ * - In case of no conflicts, set the new memtype for pages in the range
  *
- * For now, we use PageNonWB to track that the RAM page is being mapped
- * as non WB. In future, we will have to use one more flag
- * (or some other mechanism in page_struct) to distinguish between
- * UC and WC mapping.
+ * Caller must hold memtype_lock for atomicity.
  */
 static int reserve_ram_pages_type(u64 start, u64 end, unsigned long req_type,
 				  unsigned long *new_type)
 {
 	struct page *page;
-	u64 pfn, end_pfn;
+	u64 pfn;
+
+	if (req_type == _PAGE_CACHE_UC) {
+		/* We do not support strong UC */
+		WARN_ON_ONCE(1);
+		req_type = _PAGE_CACHE_UC_MINUS;
+	}
 
 	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
-		page = pfn_to_page(pfn);
-		if (page_mapped(page) || PageNonWB(page))
-			goto out;
+		unsigned long type;
 
-		SetPageNonWB(page);
+		page = pfn_to_page(pfn);
+		type = get_page_memtype(page);
+		if (type != -1) {
+			printk(KERN_INFO "reserve_ram_pages_type failed "
+				"0x%Lx-0x%Lx, track 0x%lx, req 0x%lx\n",
+				start, end, type, req_type);
+			if (new_type)
+				*new_type = type;
+
+			return -EBUSY;
+		}
 	}
-	return 0;
 
-out:
-	end_pfn = pfn;
-	for (pfn = (start >> PAGE_SHIFT); pfn < end_pfn; ++pfn) {
+	if (new_type)
+		*new_type = req_type;
+
+	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
 		page = pfn_to_page(pfn);
-		ClearPageNonWB(page);
+		set_page_memtype(page, req_type);
 	}
-
-	return -EINVAL;
+	return 0;
 }
 
 static int free_ram_pages_type(u64 start, u64 end)
 {
 	struct page *page;
-	u64 pfn, end_pfn;
+	u64 pfn;
 
 	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
 		page = pfn_to_page(pfn);
-		if (page_mapped(page) || !PageNonWB(page))
-			goto out;
-
-		ClearPageNonWB(page);
+		set_page_memtype(page, -1);
 	}
 	return 0;
-
-out:
-	end_pfn = pfn;
-	for (pfn = (start >> PAGE_SHIFT); pfn < end_pfn; ++pfn) {
-		page = pfn_to_page(pfn);
-		SetPageNonWB(page);
-	}
-	return -EINVAL;
 }
 
 /*
@@ -405,11 +403,16 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		*new_type = actual_type;
 
 	is_range_ram = pat_pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return reserve_ram_pages_type(start, end, req_type,
-					      new_type);
-	else if (is_range_ram < 0)
+	if (is_range_ram == 1) {
+
+		spin_lock(&memtype_lock);
+		err = reserve_ram_pages_type(start, end, req_type, new_type);
+		spin_unlock(&memtype_lock);
+
+		return err;
+	} else if (is_range_ram < 0) {
 		return -EINVAL;
+	}
 
 	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
@@ -505,10 +508,16 @@ int free_memtype(u64 start, u64 end)
 		return 0;
 
 	is_range_ram = pat_pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return free_ram_pages_type(start, end);
-	else if (is_range_ram < 0)
+	if (is_range_ram == 1) {
+
+		spin_lock(&memtype_lock);
+		err = free_ram_pages_type(start, end);
+		spin_unlock(&memtype_lock);
+
+		return err;
+	} else if (is_range_ram < 0) {
 		return -EINVAL;
+	}
 
 	spin_lock(&memtype_lock);
 
-- 
cgit v1.2.3


From 637b86e75f4c255a4446bc0b67ce9d914b9d2d42 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:39 -0700
Subject: x86, pat: Add lookup_memtype to get the current memtype of a paddr

Add a new routine lookup_memtype() to get the current memtype based on
the PAT reserves and frees.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 1a9d0f07593..71aa6f7246c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -573,6 +573,51 @@ unlock_ret:
 }
 
 
+/**
+ * lookup_memtype - Looksup the memory type for a physical address
+ * @paddr: physical address of which memory type needs to be looked up
+ *
+ * Only to be called when PAT is enabled
+ *
+ * Returns _PAGE_CACHE_WB, _PAGE_CACHE_WC, _PAGE_CACHE_UC_MINUS or
+ * _PAGE_CACHE_UC
+ */
+static unsigned long lookup_memtype(u64 paddr)
+{
+	int rettype = _PAGE_CACHE_WB;
+	struct memtype *entry;
+
+	if (is_ISA_range(paddr, paddr + PAGE_SIZE - 1))
+		return rettype;
+
+	if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
+		struct page *page;
+		spin_lock(&memtype_lock);
+		page = pfn_to_page(paddr >> PAGE_SHIFT);
+		rettype = get_page_memtype(page);
+		spin_unlock(&memtype_lock);
+		/*
+		 * -1 from get_page_memtype() implies RAM page is in its
+		 * default state and not reserved, and hence of type WB
+		 */
+		if (rettype == -1)
+			rettype = _PAGE_CACHE_WB;
+
+		return rettype;
+	}
+
+	spin_lock(&memtype_lock);
+
+	entry = memtype_rb_search(&memtype_rbroot, paddr);
+	if (entry != NULL)
+		rettype = entry->type;
+	else
+		rettype = _PAGE_CACHE_UC_MINUS;
+
+	spin_unlock(&memtype_lock);
+	return rettype;
+}
+
 /**
  * io_reserve_memtype - Request a memory type mapping for a region of memory
  * @start: start (physical address) of the region
-- 
cgit v1.2.3


From 1087637616dd5e96d834164ea462aed6159d039b Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:40 -0700
Subject: x86, pat: Lookup the protection from memtype list on vm_insert_pfn()

Lookup the reserved memtype during vm_insert_pfn and use that memtype
for the new mapping. This takes care or handling of vm_insert_pfn()
interface in track_pfn_vma*/untrack_pfn_vma.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 71aa6f7246c..b629f75f73d 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -848,11 +848,6 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 	pgprot_t pgprot;
 
-	/*
-	 * For now, only handle remap_pfn_range() vmas where
-	 * is_linear_pfn_mapping() == TRUE. Handling of
-	 * vm_insert_pfn() is TBD.
-	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/*
 		 * reserve the whole chunk covered by vma. We need the
@@ -880,20 +875,24 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 			unsigned long pfn, unsigned long size)
 {
+	unsigned long flags;
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	/*
-	 * For now, only handle remap_pfn_range() vmas where
-	 * is_linear_pfn_mapping() == TRUE. Handling of
-	 * vm_insert_pfn() is TBD.
-	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		return reserve_pfn_range(paddr, vma_size, prot, 0);
 	}
 
+	if (!pat_enabled)
+		return 0;
+
+	/* for vm_insert_pfn and friends, we set prot based on lookup */
+	flags = lookup_memtype(pfn << PAGE_SHIFT);
+	*prot = __pgprot((pgprot_val(vma->vm_page_prot) & (~_PAGE_CACHE_MASK)) |
+			 flags);
+
 	return 0;
 }
 
@@ -908,11 +907,6 @@ void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	/*
-	 * For now, only handle remap_pfn_range() vmas where
-	 * is_linear_pfn_mapping() == TRUE. Handling of
-	 * vm_insert_pfn() is TBD.
-	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* free the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
-- 
cgit v1.2.3


From d886c73cd4cf02a71e1650cbcb6176799d78aac1 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:41 -0700
Subject: x86, pat: Sanity check remap_pfn_range for RAM region

Add sanity check for remap_pfn_range of RAM regions using
lookup_memtype(). Previously, we did not have anyway to get the type of
RAM memory regions as they were tracked using a single bit in
page_struct (WB, nonWB). Now we can get the actual type from page struct
(WB, WC, UC_MINUS) and make sure the requester gets that type.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index b629f75f73d..a6cace0694a 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -783,11 +783,29 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 	is_ram = pat_pagerange_is_ram(paddr, paddr + size);
 
 	/*
-	 * reserve_pfn_range() doesn't support RAM pages. Maintain the current
-	 * behavior with RAM pages by returning success.
+	 * reserve_pfn_range() for RAM pages. We do not refcount to keep
+	 * track of number of mappings of RAM pages. We can assert that
+	 * the type requested matches the type of first page in the range.
 	 */
-	if (is_ram != 0)
+	if (is_ram) {
+		if (!pat_enabled)
+			return 0;
+
+		flags = lookup_memtype(paddr);
+		if (want_flags != flags) {
+			printk(KERN_WARNING
+			"%s:%d map pfn RAM range req %s for %Lx-%Lx, got %s\n",
+				current->comm, current->pid,
+				cattr_name(want_flags),
+				(unsigned long long)paddr,
+				(unsigned long long)(paddr + size),
+				cattr_name(flags));
+			*vma_prot = __pgprot((pgprot_val(*vma_prot) &
+					      (~_PAGE_CACHE_MASK)) |
+					     flags);
+		}
 		return 0;
+	}
 
 	ret = reserve_memtype(paddr, paddr + size, want_flags, &flags);
 	if (ret)
-- 
cgit v1.2.3


From e76a0136a3cf1859fbc07f122e42293d22229558 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 27 Aug 2009 11:31:16 +0900
Subject: sh: Fix up sh4_flush_dcache_page() build on UP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index e3b77f0fa47..2775f84d9aa 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -103,8 +103,9 @@ static inline void flush_cache_4096(unsigned long start,
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-static void sh4_flush_dcache_page(void *page)
+static void sh4_flush_dcache_page(void *arg)
 {
+	struct page *page = arg;
 #ifndef CONFIG_SMP
 	struct address_space *mapping = page_mapping(page);
 
-- 
cgit v1.2.3


From b37c7c66f08df66ba7a8269b6d1af949ef8dbd95 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 26 Aug 2009 10:49:44 +0000
Subject: sh: fix CPU_SH7723/7724 numbering bug

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4/probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 10e6795b56a..afd3e73d5ad 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -141,7 +141,7 @@ int __init detect_cpu_and_cache_system(void)
 	case 0x300b:
 		switch (prr) {
 		case 0x20:
-			boot_cpu_data.type = CPU_SH7723;
+			boot_cpu_data.type = CPU_SH7724;
 			boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
 			break;
 		case 0x50:
-- 
cgit v1.2.3


From b7056bc1943ec85084450e2f105650f837ae5cfc Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 26 Aug 2009 11:04:22 +0000
Subject: sh: modify to enable boot for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 33 ++++++++++++++-------------------
 arch/sh/configs/ecovec24_defconfig   | 20 ++++++++++++++------
 2 files changed, 28 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index b634a72da1e..e555b928249 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -19,14 +19,14 @@
 #include <cpu/sh7724.h>
 
 /*
- * Area   Address                    Interface     size  BusWidth
- * 0      0x0000_0000 ~ 0x03FF_FFFF  FROM          64MB  16bit
- * 1      0x0400_0000 ~ 0x07FF_FFFF  Internal I/O  64MB  16/32bit
- * 2      0x0800_0000 ~ 0x0BFF_FFFF  DRAM 2        64MB  32bit
- * 3      0x0C00_0000 ~ 0x0FFF_FFFF  DRAM 3        64MB  32bit
- * 4      0x1000_0000 ~ 0x13FF_FFFF  DRAM 4        64MB  32bit
- * 5      0x1400_0000 ~ 0x17FF_FFFF  DRAM 5        64MB  32bit
- * 6      0x1800_0000 ~ 0x1BFF_FFFF  MFI           64MB  16bit
+ *  Address      Interface        BusWidth
+ *-----------------------------------------
+ *  0x0000_0000  uboot            16bit
+ *  0x0004_0000  Linux romImage   16bit
+ *  0x0014_0000  MTD for Linux    16bit
+ *  0x0400_0000  Internal I/O     16/32bit
+ *  0x0800_0000  DRAM             32bit
+ *  0x1800_0000  MFI              16bit
  */
 
 /* Heartbeat */
@@ -58,14 +58,10 @@ static struct platform_device heartbeat_device = {
 /* MTD */
 static struct mtd_partition nor_flash_partitions[] = {
 	{
-		.name = "uboot",
+		.name = "boot loader",
 		.offset = 0,
-		.size = (256 * 1024),
+		.size = (5 * 1024 * 1024),
 		.mask_flags = MTD_CAP_ROM,
-	}, {
-		.name = "kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (2 * 1024 * 1024),
 	}, {
 		.name = "free-area",
 		.offset = MTDPART_OFS_APPEND,
@@ -107,17 +103,16 @@ static int __init devices_setup(void)
 	/* enable SCIFA0 */
 	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
 	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
-	gpio_request(GPIO_FN_SCIF0_SCK, NULL);
 
 	/* enable debug LED */
 	gpio_request(GPIO_PTG0, NULL);
 	gpio_request(GPIO_PTG1, NULL);
 	gpio_request(GPIO_PTG2, NULL);
 	gpio_request(GPIO_PTG3, NULL);
-	gpio_direction_output(GPIO_PTT0, 0);
-	gpio_direction_output(GPIO_PTT1, 0);
-	gpio_direction_output(GPIO_PTT2, 0);
-	gpio_direction_output(GPIO_PTT3, 0);
+	gpio_direction_output(GPIO_PTG0, 0);
+	gpio_direction_output(GPIO_PTG1, 0);
+	gpio_direction_output(GPIO_PTG2, 0);
+	gpio_direction_output(GPIO_PTG3, 0);
 
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 6d983f6864c..2050a76683c 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 11:32:44 2009
+# Linux kernel version: 2.6.31-rc7
+# Wed Aug 26 09:09:07 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -151,7 +151,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -185,6 +185,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -314,7 +315,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=tty0, console=ttySC3,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
 
 #
 # Bus options
@@ -333,7 +334,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -641,7 +648,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SH_ETH=y
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
@@ -1048,6 +1055,7 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-- 
cgit v1.2.3


From 35a35408914bcd22dbaeea710ec1e711b673b59e Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 26 Aug 2009 11:04:26 +0000
Subject: sh: Add SH-ETH support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 53 +++++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index e555b928249..8c0c8453d08 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -14,8 +14,10 @@
 #include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/delay.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
 #include <cpu/sh7724.h>
 
 /*
@@ -93,9 +95,41 @@ static struct platform_device nor_flash_device = {
 	},
 };
 
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8700 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
+	&sh_eth_device,
 };
 
 static int __init devices_setup(void)
@@ -114,6 +148,23 @@ static int __init devices_setup(void)
 	gpio_direction_output(GPIO_PTG2, 0);
 	gpio_direction_output(GPIO_PTG3, 0);
 
+	/* enable SH-Eth */
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_output(GPIO_PTA1, 1);
+	mdelay(20);
+
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_FN_LNKSTA,       NULL);
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
-- 
cgit v1.2.3


From 907050a33d3b6a9f37e2ceca764b60f8e3922466 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 26 Aug 2009 11:04:31 +0000
Subject: sh: Add USB support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 97 ++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 8c0c8453d08..7850818bb4e 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/usb/r8a66597.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
 #include <cpu/sh7724.h>
@@ -126,10 +127,96 @@ static struct platform_device sh_eth_device = {
 	.resource = sh_eth_resources,
 };
 
+/* USB0 host */
+void usb0_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+	.on_chip = 1,
+	.port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 65,
+		.end	= 65,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_host_resources),
+	.resource	= usb0_host_resources,
+};
+
+/*
+ * USB1
+ *
+ * CN5 can use both host/function,
+ * and we can determine it by checking PTB[3]
+ *
+ * This time only USB1 host is supported.
+ */
+void usb1_port_power(int port, int power)
+{
+	if (!gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_ERR "USB1 function is not supported\n");
+		return;
+	}
+
+	gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+	.on_chip = 1,
+	.port_power = usb1_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 66,
+		.end	= 66,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb1_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_host_resources),
+	.resource	= usb1_host_resources,
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
 	&sh_eth_device,
+	&usb0_host_device,
+	&usb1_host_device, /* USB1 host support */
 };
 
 static int __init devices_setup(void)
@@ -165,6 +252,16 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_MDC,          NULL);
 	gpio_request(GPIO_FN_LNKSTA,       NULL);
 
+	/* enable USB */
+	gpio_request(GPIO_PTB3,  NULL);
+	gpio_request(GPIO_PTB4,  NULL);
+	gpio_request(GPIO_PTB5,  NULL);
+	gpio_direction_input(GPIO_PTB3);
+	gpio_direction_output(GPIO_PTB4, 0);
+	gpio_direction_output(GPIO_PTB5, 0);
+	ctrl_outw(0x0600, 0xa40501d4);
+	ctrl_outw(0x0600, 0xa4050192);
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
-- 
cgit v1.2.3


From fa3ba51bcf2351da9869924c8765d7d485226c31 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 26 Aug 2009 11:04:34 +0000
Subject: sh: Add support LCDC for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 109 +++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 7850818bb4e..a575b38016a 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
+#include <video/sh_mobile_lcdc.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
 #include <cpu/sh7724.h>
@@ -211,14 +212,60 @@ static struct platform_device usb1_host_device = {
 	.resource	= usb1_host_resources,
 };
 
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.interface_type = RGB18,
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_LCDC,
+	},
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
 	&sh_eth_device,
 	&usb0_host_device,
 	&usb1_host_device, /* USB1 host support */
+	&lcdc_device,
 };
 
+#define PORT_HIZA 0xA4050158
 static int __init devices_setup(void)
 {
 	/* enable SCIFA0 */
@@ -262,6 +309,68 @@ static int __init devices_setup(void)
 	ctrl_outw(0x0600, 0xa40501d4);
 	ctrl_outw(0x0600, 0xa4050192);
 
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	gpio_request(GPIO_PTE6, NULL);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_request(GPIO_PTR1, NULL);
+	gpio_request(GPIO_PTA2, NULL);
+	gpio_direction_input(GPIO_PTE6);
+	gpio_direction_output(GPIO_PTU1, 0);
+	gpio_direction_output(GPIO_PTR1, 0);
+	gpio_direction_output(GPIO_PTA2, 0);
+
+	if (gpio_get_value(GPIO_PTE6)) {
+		/* DVI */
+		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].lcd_cfg.name		= "DVI";
+		lcdc_info.ch[0].lcd_cfg.xres		= 1280;
+		lcdc_info.ch[0].lcd_cfg.yres		= 720;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 40;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTA2, 1);
+		gpio_set_value(GPIO_PTU1, 1);
+	} else {
+		/* Panel */
+		/* not supported */
+	}
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
-- 
cgit v1.2.3


From 2153ad3294e3e1e89d27a78d65932352b80a4f78 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 26 Aug 2009 11:04:36 +0000
Subject: sh: Add CEU support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 109 +++++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index a575b38016a..55ff7357e79 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
 #include <cpu/sh7724.h>
@@ -256,6 +257,74 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU0,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 63,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_CEU1,
+	},
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -263,6 +332,8 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&usb0_host_device,
 	&usb1_host_device, /* USB1 host support */
 	&lcdc_device,
+	&ceu0_device,
+	&ceu1_device,
 };
 
 #define PORT_HIZA 0xA4050158
@@ -371,6 +442,44 @@ static int __init devices_setup(void)
 		/* not supported */
 	}
 
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
-- 
cgit v1.2.3


From ea15edb292197aaf0b137621bafb69f6157f4532 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 26 Aug 2009 11:04:39 +0000
Subject: sh: Add LCDC Panel support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 55ff7357e79..428d1187ce5 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -219,7 +219,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		.interface_type = RGB18,
 		.chan = LCDC_CHAN_MAINLCD,
 		.bpp = 16,
-		.clock_divider = 1,
 		.lcd_cfg = {
 			.sync = 0, /* hsync and vsync are active low */
 		},
@@ -337,6 +336,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
 };
 
 #define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
 static int __init devices_setup(void)
 {
 	/* enable SCIFA0 */
@@ -422,9 +422,13 @@ static int __init devices_setup(void)
 	gpio_direction_output(GPIO_PTR1, 0);
 	gpio_direction_output(GPIO_PTA2, 0);
 
+	/* I/O buffer drive ability is low */
+	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+
 	if (gpio_get_value(GPIO_PTE6)) {
 		/* DVI */
 		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].clock_divider		= 1,
 		lcdc_info.ch[0].lcd_cfg.name		= "DVI";
 		lcdc_info.ch[0].lcd_cfg.xres		= 1280;
 		lcdc_info.ch[0].lcd_cfg.yres		= 720;
@@ -439,7 +443,29 @@ static int __init devices_setup(void)
 		gpio_set_value(GPIO_PTU1, 1);
 	} else {
 		/* Panel */
-		/* not supported */
+
+		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+		lcdc_info.ch[0].clock_divider		= 2,
+		lcdc_info.ch[0].lcd_cfg.name		= "Panel";
+		lcdc_info.ch[0].lcd_cfg.xres		= 800;
+		lcdc_info.ch[0].lcd_cfg.yres		= 480;
+		lcdc_info.ch[0].lcd_cfg.left_margin	= 220;
+		lcdc_info.ch[0].lcd_cfg.right_margin	= 110;
+		lcdc_info.ch[0].lcd_cfg.hsync_len	= 70;
+		lcdc_info.ch[0].lcd_cfg.upper_margin	= 20;
+		lcdc_info.ch[0].lcd_cfg.lower_margin	= 5;
+		lcdc_info.ch[0].lcd_cfg.vsync_len	= 5;
+
+		gpio_set_value(GPIO_PTR1, 1);
+
+		/* FIXME
+		 *
+		 * LCDDON control is needed for Panel,
+		 * but current sh_mobile_lcdc driver doesn't control it.
+		 * It is temporary correspondence
+		 */
+		gpio_request(GPIO_PTF4, NULL);
+		gpio_direction_output(GPIO_PTF4, 1);
 	}
 
 	/* enable CEU0 */
-- 
cgit v1.2.3


From ea3cc330ac0cd521ff07c7cd432a1848c19a7e92 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:00:34 +0000
Subject: powerpc/mm: Cleanup handling of execute permission

This is an attempt at cleaning up a bit the way we handle execute
permission on powerpc. _PAGE_HWEXEC is gone, _PAGE_EXEC is now only
defined by CPUs that can do something with it, and the myriad of
#ifdef's in the I$/D$ coherency code is reduced to 2 cases that
hopefully should cover everything.

The logic on BookE is a little bit different than what it was though
not by much. Since now, _PAGE_EXEC will be set by the generic code
for executable pages, we need to filter out if they are unclean and
recover it. However, I don't expect the code to be more bloated than
it already was in that area due to that change.

I could boast that this brings proper enforcing of per-page execute
permissions to all BookE and 40x but in fact, we've had that now for
some time as a side effect of my previous rework in that area (and
I didn't even know it :-) We would only enable execute permission if
the page was cache clean and we would only cache clean it if we took
and exec fault. Since we now enforce that the later only work if
VM_EXEC is part of the VMA flags, we de-fact already enforce per-page
execute permissions... Unless I missed something

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc32.h |   7 +-
 arch/powerpc/include/asm/pgtable-ppc64.h |   3 +-
 arch/powerpc/include/asm/pte-40x.h       |   2 +-
 arch/powerpc/include/asm/pte-44x.h       |   2 +-
 arch/powerpc/include/asm/pte-8xx.h       |   1 -
 arch/powerpc/include/asm/pte-book3e.h    |  13 +--
 arch/powerpc/include/asm/pte-common.h    |  22 ++--
 arch/powerpc/include/asm/pte-fsl-booke.h |   2 +-
 arch/powerpc/include/asm/pte-hash32.h    |   1 -
 arch/powerpc/kernel/head_44x.S           |   2 +-
 arch/powerpc/kernel/head_fsl_booke.S     |   4 +-
 arch/powerpc/mm/40x_mmu.c                |   4 +-
 arch/powerpc/mm/pgtable.c                | 167 +++++++++++++++++++++----------
 arch/powerpc/mm/pgtable_32.c             |   2 +-
 arch/powerpc/mm/tlb_low_64e.S            |   4 +-
 15 files changed, 149 insertions(+), 87 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index c9ff9d75990..f2c52e25395 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -186,7 +186,7 @@ static inline unsigned long pte_update(pte_t *p,
 #endif /* !PTE_ATOMIC_UPDATES */
 
 #ifdef CONFIG_44x
-	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+	if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
 		icache_44x_need_flush = 1;
 #endif
 	return old;
@@ -217,7 +217,7 @@ static inline unsigned long long pte_update(pte_t *p,
 #endif /* !PTE_ATOMIC_UPDATES */
 
 #ifdef CONFIG_44x
-	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+	if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
 		icache_44x_need_flush = 1;
 #endif
 	return old;
@@ -267,8 +267,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 {
 	unsigned long bits = pte_val(entry) &
-		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
-		 _PAGE_HWEXEC | _PAGE_EXEC);
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
 	pte_update(ptep, 0, bits);
 }
 
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 200ec2dfa03..806abe7a3fa 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -313,8 +313,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
 static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 {
 	unsigned long bits = pte_val(entry) &
-		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
-		 _PAGE_EXEC | _PAGE_HWEXEC);
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
 
 #ifdef PTE_ATOMIC_UPDATES
 	unsigned long old, tmp;
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
index 07630faae02..6c3e1f4378d 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -46,7 +46,7 @@
 #define	_PAGE_RW	0x040	/* software: Writes permitted */
 #define	_PAGE_DIRTY	0x080	/* software: dirty page */
 #define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_EXEC	0x200	/* hardware: EX permission */
 #define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
 
 #define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h
index 37e98bcf83e..4192b9bad90 100644
--- a/arch/powerpc/include/asm/pte-44x.h
+++ b/arch/powerpc/include/asm/pte-44x.h
@@ -78,7 +78,7 @@
 #define _PAGE_PRESENT	0x00000001		/* S: PTE valid */
 #define _PAGE_RW	0x00000002		/* S: Write permission */
 #define _PAGE_FILE	0x00000004		/* S: nonlinear file mapping */
-#define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
+#define _PAGE_EXEC	0x00000004		/* H: Execute permission */
 #define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
 #define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
 #define _PAGE_SPECIAL	0x00000020		/* S: Special page */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index 8c6e3125103..94e979718dc 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -36,7 +36,6 @@
 /* These five software bits must be masked out when the entry is loaded
  * into the TLB.
  */
-#define _PAGE_EXEC	0x0008	/* software: i-cache coherency required */
 #define _PAGE_GUARDED	0x0010	/* software: guarded access */
 #define _PAGE_DIRTY	0x0020	/* software: page changed */
 #define _PAGE_RW	0x0040	/* software: user write access allowed */
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
index 1d27c77d770..9800565aebb 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -37,12 +37,13 @@
 #define _PAGE_WRITETHRU	0x800000 /* W: cache write-through */
 
 /* "Higher level" linux bit combinations */
-#define _PAGE_EXEC	_PAGE_BAP_SX /* Can be executed from potentially */
-#define _PAGE_HWEXEC	_PAGE_BAP_UX /* .. and was cache cleaned */
-#define _PAGE_RW	(_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */
-#define _PAGE_KERNEL_RW	(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY)
-#define _PAGE_KERNEL_RO	(_PAGE_BAP_SR)
-#define _PAGE_USER	(_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */
+#define _PAGE_EXEC		_PAGE_BAP_UX /* .. and was cache cleaned */
+#define _PAGE_RW		(_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */
+#define _PAGE_KERNEL_RW		(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY)
+#define _PAGE_KERNEL_RO		(_PAGE_BAP_SR)
+#define _PAGE_KERNEL_RWX	(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY | _PAGE_BAP_SX)
+#define _PAGE_KERNEL_ROX	(_PAGE_BAP_SR | _PAGE_BAP_SX)
+#define _PAGE_USER		(_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */
 
 #define _PAGE_HASHPTE	0
 #define _PAGE_BUSY	0
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index 8bb6464ba61..c3b65076a26 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -13,9 +13,6 @@
 #ifndef _PAGE_HWWRITE
 #define _PAGE_HWWRITE	0
 #endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC	0
-#endif
 #ifndef _PAGE_EXEC
 #define _PAGE_EXEC	0
 #endif
@@ -48,10 +45,16 @@
 #define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
 #endif
 #ifndef _PAGE_KERNEL_RO
-#define _PAGE_KERNEL_RO	0
+#define _PAGE_KERNEL_RO		0
+#endif
+#ifndef _PAGE_KERNEL_ROX
+#define _PAGE_KERNEL_ROX	(_PAGE_EXEC)
 #endif
 #ifndef _PAGE_KERNEL_RW
-#define _PAGE_KERNEL_RW	(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#define _PAGE_KERNEL_RW		(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#endif
+#ifndef _PAGE_KERNEL_RWX
+#define _PAGE_KERNEL_RWX	(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE | _PAGE_EXEC)
 #endif
 #ifndef _PAGE_HPTEFLAGS
 #define _PAGE_HPTEFLAGS _PAGE_HASHPTE
@@ -96,8 +99,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 #define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
 			 _PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \
 			 _PAGE_USER | _PAGE_ACCESSED | \
-			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
-			 _PAGE_EXEC | _PAGE_HWEXEC)
+			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
 
 /*
  * We define 2 sets of base prot bits, one for basic pages (ie,
@@ -154,11 +156,9 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 				 _PAGE_NO_CACHE)
 #define PAGE_KERNEL_NCG	__pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
 				 _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \
-				 _PAGE_HWEXEC)
+#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX)
 #define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
-#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \
-				 _PAGE_HWEXEC)
+#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)
 
 /* Protection used for kernel text. We want the debuggers to be able to
  * set breakpoints anywhere, so don't write protect the kernel text
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h
index 10820f58acf..ce8a9e94ce7 100644
--- a/arch/powerpc/include/asm/pte-fsl-booke.h
+++ b/arch/powerpc/include/asm/pte-fsl-booke.h
@@ -23,7 +23,7 @@
 #define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
 #define _PAGE_RW	0x00004	/* S: Write permission (SW) */
 #define _PAGE_DIRTY	0x00008	/* S: Page dirty */
-#define _PAGE_HWEXEC	0x00010	/* H: SX permission */
+#define _PAGE_EXEC	0x00010	/* H: SX permission */
 #define _PAGE_ACCESSED	0x00020	/* S: Page referenced */
 
 #define _PAGE_ENDIAN	0x00040	/* H: E bit */
diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h
index 16e571c7f9e..4aad4132d0a 100644
--- a/arch/powerpc/include/asm/pte-hash32.h
+++ b/arch/powerpc/include/asm/pte-hash32.h
@@ -26,7 +26,6 @@
 #define _PAGE_WRITETHRU	0x040	/* W: cache write-through */
 #define _PAGE_DIRTY	0x080	/* C: page changed */
 #define _PAGE_ACCESSED	0x100	/* R: page referenced */
-#define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
 #define _PAGE_RW	0x400	/* software: user write access allowed */
 #define _PAGE_SPECIAL	0x800	/* software: Special page */
 
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 656cfb2d666..711368b993f 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -497,7 +497,7 @@ tlb_44x_patch_hwater_D:
 	mtspr	SPRN_MMUCR,r12
 
 	/* Make up the required permissions */
-	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 
 	/* Compute pgdir/pmd offset */
 	rlwinm 	r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index eca80482ae7..2c5af525647 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -643,7 +643,7 @@ interrupt_base:
 
 4:
 	/* Make up the required permissions */
-	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
@@ -742,7 +742,7 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
-	li	r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
+	li	r10, (_PAGE_EXEC | _PAGE_PRESENT)
 	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
 	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 29954dc2894..f5e7b9ce63d 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -105,7 +105,7 @@ unsigned long __init mmu_mapin_ram(void)
 
 	while (s >= LARGE_PAGE_SIZE_16M) {
 		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+		unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE;
 
 		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
 		pmd_val(*pmdp++) = val;
@@ -120,7 +120,7 @@ unsigned long __init mmu_mapin_ram(void)
 
 	while (s >= LARGE_PAGE_SIZE_4M) {
 		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+		unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE;
 
 		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
 		pmd_val(*pmdp) = val;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index b6b32487e74..83f1551ec2c 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -128,28 +128,6 @@ void pte_free_finish(void)
 
 #endif /* CONFIG_SMP */
 
-/*
- * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
- */
-static pte_t do_dcache_icache_coherency(pte_t pte)
-{
-	unsigned long pfn = pte_pfn(pte);
-	struct page *page;
-
-	if (unlikely(!pfn_valid(pfn)))
-		return pte;
-	page = pfn_to_page(pfn);
-
-	if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
-		pr_devel("do_dcache_icache_coherency... flushing\n");
-		flush_dcache_icache_page(page);
-		set_bit(PG_arch_1, &page->flags);
-	}
-	else
-		pr_devel("do_dcache_icache_coherency... already clean\n");
-	return __pte(pte_val(pte) | _PAGE_HWEXEC);
-}
-
 static inline int is_exec_fault(void)
 {
 	return current->thread.regs && TRAP(current->thread.regs) == 0x400;
@@ -157,49 +135,139 @@ static inline int is_exec_fault(void)
 
 /* We only try to do i/d cache coherency on stuff that looks like
  * reasonably "normal" PTEs. We currently require a PTE to be present
- * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE
+ * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE. We also only do that
+ * on userspace PTEs
  */
 static inline int pte_looks_normal(pte_t pte)
 {
 	return (pte_val(pte) &
-		(_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) ==
-		(_PAGE_PRESENT);
+	    (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE | _PAGE_USER)) ==
+	    (_PAGE_PRESENT | _PAGE_USER);
 }
 
-#if defined(CONFIG_PPC_STD_MMU)
+struct page * maybe_pte_to_page(pte_t pte)
+{
+	unsigned long pfn = pte_pfn(pte);
+	struct page *page;
+
+	if (unlikely(!pfn_valid(pfn)))
+		return NULL;
+	page = pfn_to_page(pfn);
+	if (PageReserved(page))
+		return NULL;
+	return page;
+}
+
+#if defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0
+
 /* Server-style MMU handles coherency when hashing if HW exec permission
- * is supposed per page (currently 64-bit only). Else, we always flush
- * valid PTEs in set_pte.
+ * is supposed per page (currently 64-bit only). If not, then, we always
+ * flush the cache for valid PTEs in set_pte. Embedded CPU without HW exec
+ * support falls into the same category.
  */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_pte_filter(pte_t pte)
 {
-	return set_pte && pte_looks_normal(pte) &&
-		!(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
-		  cpu_has_feature(CPU_FTR_NOEXECUTE));
+	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+	if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
+				       cpu_has_feature(CPU_FTR_NOEXECUTE))) {
+		struct page *pg = maybe_pte_to_page(pte);
+		if (!pg)
+			return pte;
+		if (!test_bit(PG_arch_1, &pg->flags)) {
+			flush_dcache_icache_page(pg);
+			set_bit(PG_arch_1, &pg->flags);
+		}
+	}
+	return pte;
 }
-#elif _PAGE_HWEXEC == 0
-/* Embedded type MMU without HW exec support (8xx only so far), we flush
- * the cache for any present PTE
- */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+				     int dirty)
 {
-	return set_pte && pte_looks_normal(pte);
+	return pte;
 }
-#else
-/* Other embedded CPUs with HW exec support per-page, we flush on exec
- * fault if HWEXEC is not set
+
+#else /* defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 */
+
+/* Embedded type MMU with HW exec support. This is a bit more complicated
+ * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
+ * instead we "filter out" the exec permission for non clean pages.
  */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+static pte_t set_pte_filter(pte_t pte)
 {
-	return pte_looks_normal(pte) && is_exec_fault() &&
-		!(pte_val(pte) & _PAGE_HWEXEC);
+	struct page *pg;
+
+	/* No exec permission in the first place, move on */
+	if (!(pte_val(pte) & _PAGE_EXEC) || !pte_looks_normal(pte))
+		return pte;
+
+	/* If you set _PAGE_EXEC on weird pages you're on your own */
+	pg = maybe_pte_to_page(pte);
+	if (unlikely(!pg))
+		return pte;
+
+	/* If the page clean, we move on */
+	if (test_bit(PG_arch_1, &pg->flags))
+		return pte;
+
+	/* If it's an exec fault, we flush the cache and make it clean */
+	if (is_exec_fault()) {
+		flush_dcache_icache_page(pg);
+		set_bit(PG_arch_1, &pg->flags);
+		return pte;
+	}
+
+	/* Else, we filter out _PAGE_EXEC */
+	return __pte(pte_val(pte) & ~_PAGE_EXEC);
 }
-#endif
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+				     int dirty)
+{
+	struct page *pg;
+
+	/* So here, we only care about exec faults, as we use them
+	 * to recover lost _PAGE_EXEC and perform I$/D$ coherency
+	 * if necessary. Also if _PAGE_EXEC is already set, same deal,
+	 * we just bail out
+	 */
+	if (dirty || (pte_val(pte) & _PAGE_EXEC) || !is_exec_fault())
+		return pte;
+
+#ifdef CONFIG_DEBUG_VM
+	/* So this is an exec fault, _PAGE_EXEC is not set. If it was
+	 * an error we would have bailed out earlier in do_page_fault()
+	 * but let's make sure of it
+	 */
+	if (WARN_ON(!(vma->vm_flags & VM_EXEC)))
+		return pte;
+#endif /* CONFIG_DEBUG_VM */
+
+	/* If you set _PAGE_EXEC on weird pages you're on your own */
+	pg = maybe_pte_to_page(pte);
+	if (unlikely(!pg))
+		goto bail;
+
+	/* If the page is already clean, we move on */
+	if (test_bit(PG_arch_1, &pg->flags))
+		goto bail;
+
+	/* Clean the page and set PG_arch_1 */
+	flush_dcache_icache_page(pg);
+	set_bit(PG_arch_1, &pg->flags);
+
+ bail:
+	return __pte(pte_val(pte) | _PAGE_EXEC);
+}
+
+#endif /* !(defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0) */
 
 /*
  * set_pte stores a linux PTE into the linux page table.
  */
-void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+		pte_t pte)
 {
 #ifdef CONFIG_DEBUG_VM
 	WARN_ON(pte_present(*ptep));
@@ -208,9 +276,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte
 	 * this context might not have been activated yet when this
 	 * is called.
 	 */
-	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-	if (pte_need_exec_flush(pte, 1))
-		pte = do_dcache_icache_coherency(pte);
+	pte = set_pte_filter(pte);
 
 	/* Perform the setting of the PTE */
 	__set_pte_at(mm, addr, ptep, pte, 0);
@@ -227,8 +293,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 			  pte_t *ptep, pte_t entry, int dirty)
 {
 	int changed;
-	if (!dirty && pte_need_exec_flush(entry, 0))
-		entry = do_dcache_icache_coherency(entry);
+	entry = set_access_flags_filter(entry, vma, dirty);
 	changed = !pte_same(*(ptep), entry);
 	if (changed) {
 		if (!(vma->vm_flags & VM_HUGETLB))
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 5422169626b..cb96cb2e17c 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -142,7 +142,7 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
 
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
-	flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+	flags &= ~(_PAGE_USER | _PAGE_EXEC);
 
 	return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
 }
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 10d524ded7b..cd92f62f9cf 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -133,7 +133,7 @@
 
 	/* We do the user/kernel test for the PID here along with the RW test
 	 */
-	li	r11,_PAGE_PRESENT|_PAGE_HWEXEC	/* Base perm */
+	li	r11,_PAGE_PRESENT|_PAGE_EXEC	/* Base perm */
 	oris	r11,r11,_PAGE_ACCESSED@h
 
 	cmpldi	cr0,r15,0			/* Check for user region */
@@ -256,7 +256,7 @@ normal_tlb_miss_done:
 
 normal_tlb_miss_access_fault:
 	/* We need to check if it was an instruction miss */
-	andi.	r10,r11,_PAGE_HWEXEC
+	andi.	r10,r11,_PAGE_EXEC
 	bne	1f
 	ld	r14,EX_TLB_DEAR(r12)
 	ld	r15,EX_TLB_ESR(r12)
-- 
cgit v1.2.3


From 14d757520a08d09745c3b18bb34addd9bef56e2d Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date: Wed, 19 Aug 2009 04:27:53 +0000
Subject: powerpc: Fix __flush_icache_range on 44x

The ptrace POKETEXT interface allows a process to modify the text pages of
a child process being ptraced, usually to insert breakpoints via trap
instructions.  The kernel eventually calls copy_to_user_page, which in turn
calls __flush_icache_range to invalidate the icache lines for the child
process.

However, this function does not work on 44x due to the icache being virtually
indexed.  This was noticed by a breakpoint being triggered after it had been
cleared by ltrace on a 440EPx board.  The convenient solution is to do a
flash invalidate of the icache in the __flush_icache_range function.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/misc_32.S | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 15f28e0de78..da9c0c4c10f 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -342,10 +342,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
+#ifndef CONFIG_44x
 	mtctr	r4
 2:	icbi	0,r6
 	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	2b
+#else
+	/* Flash invalidate on 44x because we are passed kmapped addresses and
+	   this doesn't work for userspace pages due to the virtually tagged
+	   icache.  Sigh. */
+	iccci	0, r0
+#endif
 	sync				/* additional sync needed on g4 */
 	isync
 	blr
-- 
cgit v1.2.3


From 6fdc31a2b86cf1f98e3eed896578ad9659eeb0f8 Mon Sep 17 00:00:00 2001
From: Bastian Blank <bastian@waldi.eu.org>
Date: Wed, 12 Aug 2009 23:30:45 +0000
Subject: powerpc: Remove SMP warning from PowerMac cpufreq

On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote:
> > This patch just disables this driver on SMP kernels, as it is obviously
> > not supported.
> Why not remove the #error instead ? :-) I don't think it's still
> meaningful, especially since we use the timebase for delays nowadays
> which doesn't depend on the CPU frequency...

Your call. Take this one:

The build of a PowerMac 32bit kernel currently fails with

error: #warning "WARNING, CPUFREQ not recommended on SMP kernels"

Thie patch removes the not longer applicable SMP warning from the
PowerMac cpufreq code.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/cpufreq_32.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 65c585b8b00..08d94e4cedd 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -44,14 +44,6 @@
  */
 #undef DEBUG_FREQ
 
-/*
- * There is a problem with the core cpufreq code on SMP kernels,
- * it won't recalculate the Bogomips properly
- */
-#ifdef CONFIG_SMP
-#warning "WARNING, CPUFREQ not recommended on SMP kernels"
-#endif
-
 extern void low_choose_7447a_dfs(int dfs);
 extern void low_choose_750fx_pll(int pll);
 extern void low_sleep_handler(void);
-- 
cgit v1.2.3


From 6776426320e151051a16bc7bf86f12d310c9e8ca Mon Sep 17 00:00:00 2001
From: Gautham R Shenoy <ego@in.ibm.com>
Date: Tue, 23 Jun 2009 23:26:37 +0000
Subject: powerpc/pseries: Reduce the polling interval in __cpu_up()

Time time taken for a single cpu online operation on a pseries machine
is as follows:
Dedicated LPAR (POWER6): ~220ms.
Shared LPAR (POWER5)   : ~240ms.

Of this time, approximately 200ms is taken up by __cpu_up(). This is because
we poll every 200ms to check if the new cpu has notified it's presence
through the cpu_callin_map. We repeat this operation until the new cpu sets
the value in cpu_callin_map or 5 seconds elapse, whichever comes earlier.

However, using completion_structs instead of polling loops,
the time taken by the new processor to indicate it's presence has
found to be less than 1ms on pseries. This method however may not
work on all powerpc platforms due to the time-base synchronization code.

Keeping this in mind, we could reduce msleep polling interval from
200ms to 1ms while retaining the 5 second timeout.

With this, the time taken for a cpu online operation changes as follows:
Dedicated LPAR (POWER6): 20-25ms.
Shared LPAR (POWER5)   : 60-80ms.

In both these cases, it was found that the code polls through the loop
only once indicating that 1ms is a reasonable value, atleast on pseries.

The code needs testing on other powerpc platforms.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/smp.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0b47de07302..96f107cc016 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -412,9 +412,8 @@ int __cpuinit __cpu_up(unsigned int cpu)
 		 * CPUs can take much longer to come up in the
 		 * hotplug case.  Wait five seconds.
 		 */
-		for (c = 25; c && !cpu_callin_map[cpu]; c--) {
-			msleep(200);
-		}
+		for (c = 5000; c && !cpu_callin_map[cpu]; c--)
+			msleep(1);
 #endif
 
 	if (!cpu_callin_map[cpu]) {
-- 
cgit v1.2.3


From 7b6a09f3d6aedeaac923824af2a5df30300b56e9 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Sun, 23 Aug 2009 22:54:32 +0000
Subject: powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device
 registration

On non-PS3, we get:

| kernel BUG at drivers/rtc/rtc-ps3.c:36!

because the rtc-ps3 platform device is registered unconditionally in a kernel
with builtin support for PS3.

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/ps3/time.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c
index b178a1e66c9..40b5cb43300 100644
--- a/arch/powerpc/platforms/ps3/time.c
+++ b/arch/powerpc/platforms/ps3/time.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
+#include <asm/firmware.h>
 #include <asm/rtc.h>
 #include <asm/lv1call.h>
 #include <asm/ps3.h>
@@ -84,6 +85,9 @@ static int __init ps3_rtc_init(void)
 {
 	struct platform_device *pdev;
 
+	if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+		return -ENODEV;
+
 	pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0);
 	if (IS_ERR(pdev))
 		return PTR_ERR(pdev);
-- 
cgit v1.2.3


From b080f187adb79bbcbe28814b07cbc1ead34c469a Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Tue, 25 Aug 2009 07:53:35 +0000
Subject: powerpc/ps3: Update ps3_defconfig

Update ps3_defconfig.

 o Refresh for 2.6.31.
 o Remove MTD support.
 o Add more HID drivers.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ps3_defconfig | 211 +++++++++++++------------------------
 1 file changed, 75 insertions(+), 136 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index e28e65e7a0e..7de127e4cee 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Fri May 15 10:37:00 2009
+# Linux kernel version: 2.6.31-rc7
+# Mon Aug 24 17:38:50 2009
 #
 CONFIG_PPC64=y
 
 #
 # Processor support
 #
+CONFIG_PPC_BOOK3S_64=y
 CONFIG_PPC_BOOK3S=y
 # CONFIG_POWER4_ONLY is not set
 CONFIG_POWER3=y
@@ -20,6 +21,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_64=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_64BIT=y
@@ -31,6 +33,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_PPC=y
@@ -62,6 +64,7 @@ CONFIG_DTC=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,7 +128,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -145,6 +154,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -210,7 +224,7 @@ CONFIG_PPC_CELL=y
 #
 # Cell Broadband Engine options
 #
-CONFIG_SPU_FS=y
+CONFIG_SPU_FS=m
 CONFIG_SPU_FS_64K_LS=y
 # CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
@@ -255,6 +269,7 @@ CONFIG_BINFMT_MISC=y
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -285,9 +300,9 @@ CONFIG_MIGRATION=y
 CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_4K_PAGES=y
@@ -399,6 +414,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -433,11 +449,14 @@ CONFIG_BT_HCIBTUSB=m
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 # CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_DEBUGFS is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
+CONFIG_MAC80211_DEFAULT_PS=y
+CONFIG_MAC80211_DEFAULT_PS_VALUE=1
 
 #
 # Rate control algorithm selection
@@ -447,7 +466,6 @@ CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
@@ -472,77 +490,7 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
+# CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -590,10 +538,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -626,7 +570,6 @@ CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_UEVENT is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -646,10 +589,11 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
-CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -669,8 +613,7 @@ CONFIG_WLAN_80211=y
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 
 #
@@ -682,7 +625,7 @@ CONFIG_ZD1211RW=m
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
@@ -693,10 +636,11 @@ CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
 # CONFIG_USB_NET_PLUSB is not set
-CONFIG_USB_NET_MCS7830=m
+# CONFIG_USB_NET_MCS7830 is not set
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -771,8 +715,7 @@ CONFIG_DEVKMEM=y
 #
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -782,6 +725,11 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -805,22 +753,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -898,6 +831,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PPC=y
 CONFIG_SND_PS3=m
@@ -930,29 +868,34 @@ CONFIG_USB_HIDDEV=y
 # Special HID drivers
 #
 # CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
 # CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
 # CONFIG_HID_SAMSUNG is not set
 CONFIG_HID_SONY=m
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SUNPLUS=m
+# CONFIG_HID_GREENASIA is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -988,6 +931,8 @@ CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1115,6 +1060,10 @@ CONFIG_RTC_DRV_PS3=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1141,11 +1090,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1205,7 +1155,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1222,6 +1171,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1359,7 +1309,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1374,31 +1323,21 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
-- 
cgit v1.2.3


From 15b8dd53f5ffaf8e2d9095c423f713423f576c0f Mon Sep 17 00:00:00 2001
From: Bob Moore <robert.moore@intel.com>
Date: Mon, 29 Jun 2009 13:39:29 +0800
Subject: ACPICA: Major update for acpi_get_object_info external interface

Completed a major update for the acpi_get_object_info external interface.
Changes include:
 - Support for variable, unlimited length HID, UID, and CID strings
 - Support Processor objects the same as Devices (HID,UID,CID,ADR,STA, etc.)
 - Call the _SxW power methods on behalf of a device object
 - Determine if a device is a PCI root bridge
 - Change the ACPI_BUFFER parameter to ACPI_DEVICE_INFO.
These changes will require an update to all callers of this interface.
See the ACPICA Programmer Reference for details.

Also, update all invocations of acpi_get_object_info interface

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/ia64/hp/common/sba_iommu.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 8cfb001092a..674a8374c6d 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2026,24 +2026,21 @@ acpi_sba_ioc_add(struct acpi_device *device)
 	struct ioc *ioc;
 	acpi_status status;
 	u64 hpa, length;
-	struct acpi_buffer buffer;
 	struct acpi_device_info *dev_info;
 
 	status = hp_acpi_csr_space(device->handle, &hpa, &length);
 	if (ACPI_FAILURE(status))
 		return 1;
 
-	buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
-	status = acpi_get_object_info(device->handle, &buffer);
+	status = acpi_get_object_info(device->handle, &dev_info);
 	if (ACPI_FAILURE(status))
 		return 1;
-	dev_info = buffer.pointer;
 
 	/*
 	 * For HWP0001, only SBA appears in ACPI namespace.  It encloses the PCI
 	 * root bridges, and its CSR space includes the IOC function.
 	 */
-	if (strncmp("HWP0001", dev_info->hardware_id.value, 7) == 0) {
+	if (strncmp("HWP0001", dev_info->hardware_id.string, 7) == 0) {
 		hpa += ZX1_IOC_OFFSET;
 		/* zx1 based systems default to kernel page size iommu pages */
 		if (!iovp_shift)
-- 
cgit v1.2.3


From 57844a8f8e29802f37ad9a0f94eb11d6ae358603 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 19 Aug 2009 14:48:38 +0200
Subject: x86: Add x86_init infrastructure

The upcoming Moorestown support brings the embedded world to x86. The
setup code of x86 has already a couple of hooks which are either
x86_quirks or paravirt ops. Some of those setup hooks are pretty
convoluted like the timer setup and the tsc calibration code. But
there are other places which could do with a cleanup.

Instead of having inline functions/macros which are modified at
compile time I decided to introduce x86_init ops which are
unconditional in the code and make it clear that they can be changed
either during compile time or in the early boot process. The function
pointers are initialized by default functions which can be noops so
that the pointer can be called unconditionally in the most cases. This
also allows us to remove 32bit/64bit, paravirt and other #ifdeffery.

paravirt guests are just a hardware platform in the setup code, so we
should treat them as such and not hide all behind multiple layers of
indirection and compile time dependencies.

It's more obvious that x86_init.timers.timer_init() is a function
pointer than the late_time_init = choose_time_init() obscurity. It's
also way simpler to grep for x86_init.timers.timer_init and find all
the places which modify that function pointer instead of analyzing
weak functions, macros and paravirt indirections.

Note. This is not a general paravirt_ops replacement. It just will
move setup related hooks which are potentially useful for other
platform setup purposes as well out of the paravirt domain.

Add the base infrastructure without any functionality.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/setup.h    |  2 ++
 arch/x86/include/asm/x86_init.h | 15 +++++++++++++++
 arch/x86/kernel/Makefile        |  2 +-
 arch/x86/kernel/x86_init.c      | 17 +++++++++++++++++
 4 files changed, 35 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/include/asm/x86_init.h
 create mode 100644 arch/x86/kernel/x86_init.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 4093d1ed6db..741e2956f3c 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -7,6 +7,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/x86_init.h>
+
 /*
  * Any setup quirks to be performed?
  */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
new file mode 100644
index 00000000000..14d11071675
--- /dev/null
+++ b/arch/x86/include/asm/x86_init.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_X86_PLATFORM_H
+#define _ASM_X86_PLATFORM_H
+
+/**
+ * struct x86_init_ops - functions for platform specific setup
+ *
+ */
+struct x86_init_ops {
+};
+
+extern struct x86_init_ops x86_init;
+
+extern void x86_init_noop(void);
+
+#endif
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 430d5b24af7..313ed6fca9b 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -32,7 +32,7 @@ GCOV_PROFILE_paravirt.o		:= n
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o dumpstack.o
-obj-y			+= setup.o i8259.o irqinit.o
+obj-y			+= setup.o x86_init.o i8259.o irqinit.o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
 obj-$(CONFIG_X86_32)	+= probe_roms_32.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
new file mode 100644
index 00000000000..82d510c9c99
--- /dev/null
+++ b/arch/x86/kernel/x86_init.c
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2009 Thomas Gleixner <tglx@linutronix.de>
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+#include <linux/init.h>
+
+#include <asm/x86_init.h>
+
+void __cpuinit x86_init_noop(void) { }
+
+/*
+ * The platform setup functions are preset with the default functions
+ * for standard PC hardware.
+ */
+struct __initdata x86_init_ops x86_init = {
+};
-- 
cgit v1.2.3


From f7cf5a5b8c0e59eac8d30b62271cb0fa52e53ebc Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 19 Aug 2009 14:43:56 +0200
Subject: x86: Add probe_roms to x86_init

probe_roms is only used on 32bit. Add it to the x86_init ops and
remove the #ifdefs.

Default initializer is x86_init_noop() which is overridden in
the 32bit boot code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/x86_init.h | 10 ++++++++++
 arch/x86/kernel/head32.c        |  3 +++
 arch/x86/kernel/setup.c         |  4 +---
 arch/x86/kernel/x86_init.c      |  4 ++++
 4 files changed, 18 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 14d11071675..75e9e68d635 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -1,11 +1,21 @@
 #ifndef _ASM_X86_PLATFORM_H
 #define _ASM_X86_PLATFORM_H
 
+/**
+ * struct x86_init_resources - platform specific resource related ops
+ * @probe_roms:			probe BIOS roms
+ *
+ */
+struct x86_init_resources {
+	void (*probe_roms)(void);
+};
+
 /**
  * struct x86_init_ops - functions for platform specific setup
  *
  */
 struct x86_init_ops {
+	struct x86_init_resources resources;
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 3f8579f8d42..4049353152c 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -29,6 +29,9 @@ void __init i386_start_kernel(void)
 		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
 	}
 #endif
+	/* Initilize 32bit specific setup functions */
+	x86_init.resources.probe_roms = probe_roms;
+
 	reserve_ebda_region();
 
 	/*
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 63f32d220ef..5796eb158d4 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -835,9 +835,7 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	init_hypervisor(&boot_cpu_data);
 
-#ifdef CONFIG_X86_32
-	probe_roms();
-#endif
+	x86_init.resources.probe_roms();
 
 	/* after parse_early_param, so could debug it */
 	insert_resource(&iomem_resource, &code_resource);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 82d510c9c99..88883f8006c 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -14,4 +14,8 @@ void __cpuinit x86_init_noop(void) { }
  * for standard PC hardware.
  */
 struct __initdata x86_init_ops x86_init = {
+
+	.resources = {
+		.probe_roms		= x86_init_noop,
+	},
 };
-- 
cgit v1.2.3


From 8fee697d990c54976c8dc167270633299e2515d2 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 19 Aug 2009 14:55:50 +0200
Subject: x86: Add request_standard_resources to x86_init

The 32bit and the 64bit code are slighty different in the reservation
of standard resources. Also the upcoming Moorestown support needs its
own version of that.

Add it to x86_init_ops and initialize it with the 64bit default. 32bit
overrides it in early boot. Now moorestown can add it's own override
w/o sprinkling the code with more #ifdefs

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/setup.h    |  3 +++
 arch/x86/include/asm/x86_init.h |  3 +++
 arch/x86/kernel/head32.c        |  1 +
 arch/x86/kernel/setup.c         | 28 ++++++++++++++++------------
 arch/x86/kernel/x86_init.c      |  3 ++-
 5 files changed, 25 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 741e2956f3c..19769ac6061 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -88,6 +88,9 @@ extern unsigned long saved_video_mode;
 #define paravirt_post_allocator_init()	do {} while (0)
 #endif
 
+extern void reserve_standard_io_resources(void);
+extern void i386_reserve_resources(void);
+
 #ifndef _SETUP
 
 /*
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 75e9e68d635..d0d9be25ed9 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -4,10 +4,13 @@
 /**
  * struct x86_init_resources - platform specific resource related ops
  * @probe_roms:			probe BIOS roms
+ * @reserve_resources:		reserve the standard resources for the
+ *				platform
  *
  */
 struct x86_init_resources {
 	void (*probe_roms)(void);
+	void (*reserve_resources)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 4049353152c..d91c37c0206 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -31,6 +31,7 @@ void __init i386_start_kernel(void)
 #endif
 	/* Initilize 32bit specific setup functions */
 	x86_init.resources.probe_roms = probe_roms;
+	x86_init.resources.reserve_resources = i386_reserve_resources;
 
 	reserve_ebda_region();
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 5796eb158d4..c2a8090e831 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -171,13 +171,6 @@ static struct resource bss_resource = {
 
 
 #ifdef CONFIG_X86_32
-static struct resource video_ram_resource = {
-	.name	= "Video RAM area",
-	.start	= 0xa0000,
-	.end	= 0xbffff,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
-};
-
 /* cpu data as detected by the assembly code in head.S */
 struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
 /* common cpu data for all cpus */
@@ -605,7 +598,7 @@ static struct resource standard_io_resources[] = {
 		.flags = IORESOURCE_BUSY | IORESOURCE_IO }
 };
 
-static void __init reserve_standard_io_resources(void)
+void __init reserve_standard_io_resources(void)
 {
 	int i;
 
@@ -1013,10 +1006,7 @@ void __init setup_arch(char **cmdline_p)
 	e820_reserve_resources();
 	e820_mark_nosave_regions(max_low_pfn);
 
-#ifdef CONFIG_X86_32
-	request_resource(&iomem_resource, &video_ram_resource);
-#endif
-	reserve_standard_io_resources();
+	x86_init.resources.reserve_resources();
 
 	e820_setup_gap();
 
@@ -1102,4 +1092,18 @@ void __init x86_quirk_time_init(void)
 	irq0.mask = cpumask_of_cpu(0);
 	setup_irq(0, &irq0);
 }
+
+static struct resource video_ram_resource = {
+	.name	= "Video RAM area",
+	.start	= 0xa0000,
+	.end	= 0xbffff,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+void __init i386_reserve_resources(void)
+{
+	request_resource(&iomem_resource, &video_ram_resource);
+	reserve_standard_io_resources();
+}
+
 #endif /* CONFIG_X86_32 */
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 88883f8006c..68c093b67ec 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -5,7 +5,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/x86_init.h>
+#include <asm/setup.h>
 
 void __cpuinit x86_init_noop(void) { }
 
@@ -17,5 +17,6 @@ struct __initdata x86_init_ops x86_init = {
 
 	.resources = {
 		.probe_roms		= x86_init_noop,
+		.reserve_resources	= reserve_standard_io_resources,
 	},
 };
-- 
cgit v1.2.3


From 816c25e7d4fb6fd40022a376e8b7f45b1edf5a89 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 19 Aug 2009 14:36:27 +0200
Subject: x86: Add reserve_ebda_region to x86_init_ops

reserve_ebda_region needs to be called befor start_kernel. Moorestown
needs to override it. Make it a x86_init_ops function and initialize
it with the default reserve_ebda_region.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/x86_init.h | 2 ++
 arch/x86/kernel/head32.c        | 4 ++--
 arch/x86/kernel/head64.c        | 3 +--
 arch/x86/kernel/x86_init.c      | 2 ++
 4 files changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index d0d9be25ed9..8a971cb3dd3 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -6,11 +6,13 @@
  * @probe_roms:			probe BIOS roms
  * @reserve_resources:		reserve the standard resources for the
  *				platform
+ * @reserve_ebda_region:	reserve the extended bios data area
  *
  */
 struct x86_init_resources {
 	void (*probe_roms)(void);
 	void (*reserve_resources)(void);
+	void (*reserve_ebda_region)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index d91c37c0206..921a23b6c14 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -11,7 +11,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/e820.h>
-#include <asm/bios_ebda.h>
+#include <asm/page.h>
 #include <asm/trampoline.h>
 
 void __init i386_start_kernel(void)
@@ -33,7 +33,7 @@ void __init i386_start_kernel(void)
 	x86_init.resources.probe_roms = probe_roms;
 	x86_init.resources.reserve_resources = i386_reserve_resources;
 
-	reserve_ebda_region();
+	x86_init.resources.reserve_ebda_region();
 
 	/*
 	 * At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 70eaa852c73..cead8149c3d 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -23,7 +23,6 @@
 #include <asm/sections.h>
 #include <asm/kdebug.h>
 #include <asm/e820.h>
-#include <asm/bios_ebda.h>
 #include <asm/trampoline.h>
 
 static void __init zap_identity_mappings(void)
@@ -112,7 +111,7 @@ void __init x86_64_start_reservations(char *real_mode_data)
 	}
 #endif
 
-	reserve_ebda_region();
+	x86_init.resources.reserve_ebda_region();
 
 	/*
 	 * At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 68c093b67ec..1fff49a6858 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -5,6 +5,7 @@
  */
 #include <linux/init.h>
 
+#include <asm/bios_ebda.h>
 #include <asm/setup.h>
 
 void __cpuinit x86_init_noop(void) { }
@@ -18,5 +19,6 @@ struct __initdata x86_init_ops x86_init = {
 	.resources = {
 		.probe_roms		= x86_init_noop,
 		.reserve_resources	= reserve_standard_io_resources,
+		.reserve_ebda_region	= reserve_ebda_region,
 	},
 };
-- 
cgit v1.2.3


From 6b18ae3e2ff62daa9f181401759161dd8de0aadf Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 10:19:54 +0200
Subject: x86: Move memory_setup to x86_init_ops

memory_setup is overridden by x86_quirks and by paravirts with weak
functions and quirks. Unify the whole mess and make it an
unconditional x86_init_ops function which defaults to the standard
function and can be overridden by the early platform code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/e820.h           |  2 --
 arch/x86/include/asm/paravirt_types.h |  1 -
 arch/x86/include/asm/setup.h          |  1 -
 arch/x86/include/asm/x86_init.h       |  2 ++
 arch/x86/kernel/apic/numaq_32.c       |  1 -
 arch/x86/kernel/e820.c                | 19 +------------------
 arch/x86/kernel/paravirt.c            |  6 ------
 arch/x86/kernel/visws_quirks.c        |  3 ++-
 arch/x86/kernel/x86_init.c            |  2 ++
 arch/x86/lguest/boot.c                |  3 ++-
 arch/x86/xen/enlighten.c              |  3 ++-
 11 files changed, 11 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 7ecba4d8508..40b4e614fe7 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -126,8 +126,6 @@ extern void e820_reserve_resources(void);
 extern void e820_reserve_resources_late(void);
 extern void setup_memory_map(void);
 extern char *default_machine_specific_memory_setup(void);
-extern char *machine_specific_memory_setup(void);
-extern char *memory_setup(void);
 #endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 2b3371bae29..6d668968b6b 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -81,7 +81,6 @@ struct pv_init_ops {
 
 	/* Basic arch-specific setup */
 	void (*arch_setup)(void);
-	char *(*memory_setup)(void);
 	void (*post_allocator_init)(void);
 
 	/* Print a banner to identify the environment */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 19769ac6061..9cba9d6ca88 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -22,7 +22,6 @@ struct x86_quirks {
 	int (*arch_pre_intr_init)(void);
 	int (*arch_intr_init)(void);
 	int (*arch_trap_init)(void);
-	char * (*arch_memory_setup)(void);
 	int (*mach_get_smp_config)(unsigned int early);
 	int (*mach_find_smp_config)(unsigned int reserve);
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 8a971cb3dd3..6c084f2a6c3 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -7,12 +7,14 @@
  * @reserve_resources:		reserve the standard resources for the
  *				platform
  * @reserve_ebda_region:	reserve the extended bios data area
+ * @memory_setup:		platform specific memory setup
  *
  */
 struct x86_init_resources {
 	void (*probe_roms)(void);
 	void (*reserve_resources)(void);
 	void (*reserve_ebda_region)(void);
+	char *(*memory_setup)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index ca96e68f0d2..403c062f69e 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -260,7 +260,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init		= numaq_pre_time_init,
 	.arch_time_init			= NULL,
 	.arch_pre_intr_init		= NULL,
-	.arch_memory_setup		= NULL,
 	.arch_intr_init			= NULL,
 	.arch_trap_init			= NULL,
 	.mach_get_smp_config		= NULL,
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 5cb5725b2ba..0d804b907e8 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1455,28 +1455,11 @@ char *__init default_machine_specific_memory_setup(void)
 	return who;
 }
 
-char *__init __attribute__((weak)) machine_specific_memory_setup(void)
-{
-	if (x86_quirks->arch_memory_setup) {
-		char *who = x86_quirks->arch_memory_setup();
-
-		if (who)
-			return who;
-	}
-	return default_machine_specific_memory_setup();
-}
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
-	return machine_specific_memory_setup();
-}
-
 void __init setup_memory_map(void)
 {
 	char *who;
 
-	who = memory_setup();
+	who = x86_init.resources.memory_setup();
 	memcpy(&e820_saved, &e820, sizeof(struct e820map));
 	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
 	e820_print_map(who);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 70ec9b951d7..532c9a2626c 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -60,11 +60,6 @@ static void __init default_banner(void)
 	       pv_info.name);
 }
 
-char *memory_setup(void)
-{
-	return pv_init_ops.memory_setup();
-}
-
 /* Simple instruction patching code. */
 #define DEF_NATIVE(ops, name, code)					\
 	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
@@ -322,7 +317,6 @@ struct pv_init_ops pv_init_ops = {
 	.patch = native_patch,
 	.banner = default_banner,
 	.arch_setup = paravirt_nop,
-	.memory_setup = machine_specific_memory_setup,
 };
 
 struct pv_time_ops pv_time_ops = {
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 31ffc24eec4..97c670df1ae 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -239,7 +239,6 @@ static int visws_trap_init(void);
 static struct x86_quirks visws_x86_quirks __initdata = {
 	.arch_time_init		= visws_time_init,
 	.arch_pre_intr_init	= visws_pre_intr_init,
-	.arch_memory_setup	= visws_memory_setup,
 	.arch_intr_init		= NULL,
 	.arch_trap_init		= visws_trap_init,
 	.mach_get_smp_config	= visws_get_smp_config,
@@ -263,6 +262,8 @@ void __init visws_early_detect(void)
 	 */
 	x86_quirks = &visws_x86_quirks;
 
+	x86_init.resources.memory_setup = visws_memory_setup;
+
 	/*
 	 * Install reboot quirks:
 	 */
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 1fff49a6858..1965bff3489 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -7,6 +7,7 @@
 
 #include <asm/bios_ebda.h>
 #include <asm/setup.h>
+#include <asm/e820.h>
 
 void __cpuinit x86_init_noop(void) { }
 
@@ -20,5 +21,6 @@ struct __initdata x86_init_ops x86_init = {
 		.probe_roms		= x86_init_noop,
 		.reserve_resources	= reserve_standard_io_resources,
 		.reserve_ebda_region	= reserve_ebda_region,
+		.memory_setup		= default_machine_specific_memory_setup,
 	},
 };
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index d677fa9ca65..11445c176de 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1270,7 +1270,6 @@ __init void lguest_init(void)
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
 	/* Setup operations */
-	pv_init_ops.memory_setup = lguest_memory_setup;
 	pv_init_ops.patch = lguest_patch;
 
 	/* Intercepts of various CPU instructions */
@@ -1325,6 +1324,8 @@ __init void lguest_init(void)
 	pv_time_ops.time_init = lguest_time_init;
 	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
+	x86_init.resources.memory_setup = lguest_memory_setup;
+
 	/*
 	 * Now is a good time to look at the implementations of these functions
 	 * before returning to the rest of lguest_init().
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e90540a46a0..50b20c64f0b 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -841,7 +841,6 @@ static const struct pv_init_ops xen_init_ops __initdata = {
 	.patch = xen_patch,
 
 	.banner = xen_banner,
-	.memory_setup = xen_memory_setup,
 	.arch_setup = xen_arch_setup,
 	.post_allocator_init = xen_post_allocator_init,
 };
@@ -982,6 +981,8 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
+	x86_init.resources.memory_setup = xen_memory_setup;
+
 #ifdef CONFIG_X86_64
 	/*
 	 * Setup percpu state.  We only need to do this for 64-bit
-- 
cgit v1.2.3


From f4848472cd99487e182b64fb2a5d0e4fedbe86ad Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 12:05:01 +0200
Subject: x86: Sanitize smp_record and move it to x86_init_ops

The x86 quirkification introduced an extra ugly hackery with a
variable pointer in the mpparse code. If the pointer is initialized
then it is dereferenced and the variable set to 0 or incremented.

Create a x86_init_ops function and let the affected numaq code
hold the function. Default init is a setup noop.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/setup.h    |  1 -
 arch/x86/include/asm/x86_init.h | 12 +++++++++++-
 arch/x86/kernel/apic/numaq_32.c | 19 ++++++++++++++++---
 arch/x86/kernel/mpparse.c       |  6 ++----
 arch/x86/kernel/x86_init.c      |  5 +++++
 5 files changed, 34 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 9cba9d6ca88..bbf2dfd59b4 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -25,7 +25,6 @@ struct x86_quirks {
 	int (*mach_get_smp_config)(unsigned int early);
 	int (*mach_find_smp_config)(unsigned int reserve);
 
-	int *mpc_record;
 	int (*mpc_apic_id)(struct mpc_cpu *m);
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 6c084f2a6c3..10b297b1881 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -1,6 +1,14 @@
 #ifndef _ASM_X86_PLATFORM_H
 #define _ASM_X86_PLATFORM_H
 
+/**
+ * struct x86_init_mpparse - platform specific mpparse ops
+ * @mpc_record:			platform specific mpc record accounting
+ */
+struct x86_init_mpparse {
+	void (*mpc_record)(unsigned int mode);
+};
+
 /**
  * struct x86_init_resources - platform specific resource related ops
  * @probe_roms:			probe BIOS roms
@@ -22,11 +30,13 @@ struct x86_init_resources {
  *
  */
 struct x86_init_ops {
-	struct x86_init_resources resources;
+	struct x86_init_resources	resources;
+	struct x86_init_mpparse		mpparse;
 };
 
 extern struct x86_init_ops x86_init;
 
 extern void x86_init_noop(void);
+extern void x86_init_uint_noop(unsigned int unused);
 
 #endif
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 403c062f69e..b5f0b1dc7dd 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -66,7 +66,6 @@ struct mpc_trans {
 	unsigned short			trans_reserved;
 };
 
-/* x86_quirks member */
 static int				mpc_record;
 
 static struct mpc_trans			*translation_table[MAX_MPC_ENTRY];
@@ -177,6 +176,19 @@ static void mpc_oem_pci_bus(struct mpc_bus *m)
 	quad_local_to_mp_bus_id[quad][local] = m->busid;
 }
 
+/*
+ * Called from mpparse code.
+ * mode = 0: prescan
+ * mode = 1: one mpc entry scanned
+ */
+static void numaq_mpc_record(unsigned int mode)
+{
+	if (!mode)
+		mpc_record = 0;
+	else
+		mpc_record++;
+}
+
 static void __init MP_translation_info(struct mpc_trans *m)
 {
 	printk(KERN_INFO
@@ -264,7 +276,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_trap_init			= NULL,
 	.mach_get_smp_config		= NULL,
 	.mach_find_smp_config		= NULL,
-	.mpc_record			= &mpc_record,
 	.mpc_apic_id			= mpc_apic_id,
 	.mpc_oem_bus_info		= mpc_oem_bus_info,
 	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
@@ -285,8 +296,10 @@ static __init void early_check_numaq(void)
 	if (smp_found_config)
 		early_get_smp_config();
 
-	if (found_numaq)
+	if (found_numaq) {
 		x86_quirks = &numaq_x86_quirks;
+		x86_init.mpparse.mpc_record = numaq_mpc_record;
+	}
 }
 
 int __init get_memcfg_numaq(void)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 651c93b2886..b2179fdf0ff 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -320,8 +320,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 	/*
 	 *      Now process the configuration blocks.
 	 */
-	if (x86_quirks->mpc_record)
-		*x86_quirks->mpc_record = 0;
+	x86_init.mpparse.mpc_record(0);
 
 	while (count < mpc->length) {
 		switch (*mpt) {
@@ -353,8 +352,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 			count = mpc->length;
 			break;
 		}
-		if (x86_quirks->mpc_record)
-			(*x86_quirks->mpc_record)++;
+		x86_init.mpparse.mpc_record(1);
 	}
 
 #ifdef CONFIG_X86_BIGSMP
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 1965bff3489..83bd5db376b 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -10,6 +10,7 @@
 #include <asm/e820.h>
 
 void __cpuinit x86_init_noop(void) { }
+void __init x86_init_uint_noop(unsigned int unused) { }
 
 /*
  * The platform setup functions are preset with the default functions
@@ -23,4 +24,8 @@ struct __initdata x86_init_ops x86_init = {
 		.reserve_ebda_region	= reserve_ebda_region,
 		.memory_setup		= default_machine_specific_memory_setup,
 	},
+
+	.mpparse = {
+		.mpc_record		= x86_init_uint_noop,
+	},
 };
-- 
cgit v1.2.3


From de93410310952fb7b705f784ef22493c8362dbe8 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 09:27:29 +0200
Subject: x86: Move ioapic_ids_setup to x86_init_ops

32bit and also the numaq code have special requirements on the
ioapic_id setup. Convert it to a x86_init_ops function and get rid
of the quirks and #ifdefs

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/io_apic.h  |  3 ++-
 arch/x86/include/asm/setup.h    |  1 -
 arch/x86/include/asm/x86_init.h |  2 ++
 arch/x86/kernel/apic/io_apic.c  | 11 ++++-------
 arch/x86/kernel/apic/numaq_32.c |  8 +-------
 arch/x86/kernel/head32.c        |  3 +++
 arch/x86/kernel/x86_init.c      |  1 +
 7 files changed, 13 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 330ee807f89..2b8aeb89933 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -177,12 +177,13 @@ extern int setup_ioapic_entry(int apic, int irq,
 			      int polarity, int vector, int pin);
 extern void ioapic_write_entry(int apic, int pin,
 			       struct IO_APIC_route_entry e);
+extern void setup_ioapic_ids_from_mpc(void);
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
+#define setup_ioapic_ids_from_mpc x86_init_noop
 static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)	{ }
 static inline void ioapic_insert_resources(void) { }
-
 static inline void probe_nr_irqs_gsi(void)	{ }
 #endif
 
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index bbf2dfd59b4..cc8b4b0550e 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -30,7 +30,6 @@ struct x86_quirks {
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
 				unsigned short oemsize);
-	int (*setup_ioapic_ids)(void);
 };
 
 extern void x86_quirk_intr_init(void);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 10b297b1881..65985730b37 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -4,9 +4,11 @@
 /**
  * struct x86_init_mpparse - platform specific mpparse ops
  * @mpc_record:			platform specific mpc record accounting
+ * @setup_ioapic_ids:		platform specific ioapic id override
  */
 struct x86_init_mpparse {
 	void (*mpc_record)(unsigned int mode);
+	void (*setup_ioapic_ids)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d2ed6c5ddc8..5f4687187ce 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2014,7 +2014,7 @@ void disable_IO_APIC(void)
  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
  */
 
-static void __init setup_ioapic_ids_from_mpc(void)
+void __init setup_ioapic_ids_from_mpc(void)
 {
 	union IO_APIC_reg_00 reg_00;
 	physid_mask_t phys_id_present_map;
@@ -2023,9 +2023,8 @@ static void __init setup_ioapic_ids_from_mpc(void)
 	unsigned char old_id;
 	unsigned long flags;
 
-	if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids())
+	if (acpi_ioapic)
 		return;
-
 	/*
 	 * Don't check I/O APIC IDs for xAPIC systems.  They have
 	 * no meaning without the serial APIC bus.
@@ -3061,10 +3060,8 @@ void __init setup_IO_APIC(void)
 	/*
          * Set up IO-APIC IRQ routing.
          */
-#ifdef CONFIG_X86_32
-	if (!acpi_ioapic)
-		setup_ioapic_ids_from_mpc();
-#endif
+	x86_init.mpparse.setup_ioapic_ids();
+
 	sync_Arb_IDs();
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index b5f0b1dc7dd..f3717659265 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -262,12 +262,6 @@ static void __init
 	}
 }
 
-static int __init numaq_setup_ioapic_ids(void)
-{
-	/* so can skip it */
-	return 1;
-}
-
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init		= numaq_pre_time_init,
 	.arch_time_init			= NULL,
@@ -280,7 +274,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mpc_oem_bus_info		= mpc_oem_bus_info,
 	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
 	.smp_read_mpc_oem		= smp_read_mpc_oem,
-	.setup_ioapic_ids		= numaq_setup_ioapic_ids,
 };
 
 static __init void early_check_numaq(void)
@@ -299,6 +292,7 @@ static __init void early_check_numaq(void)
 	if (found_numaq) {
 		x86_quirks = &numaq_x86_quirks;
 		x86_init.mpparse.mpc_record = numaq_mpc_record;
+		x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
 	}
 }
 
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 921a23b6c14..a21398fac4f 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -13,6 +13,8 @@
 #include <asm/e820.h>
 #include <asm/page.h>
 #include <asm/trampoline.h>
+#include <asm/apic.h>
+#include <asm/io_apic.h>
 
 void __init i386_start_kernel(void)
 {
@@ -32,6 +34,7 @@ void __init i386_start_kernel(void)
 	/* Initilize 32bit specific setup functions */
 	x86_init.resources.probe_roms = probe_roms;
 	x86_init.resources.reserve_resources = i386_reserve_resources;
+	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
 
 	x86_init.resources.reserve_ebda_region();
 
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 83bd5db376b..f4a32b3ab02 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -27,5 +27,6 @@ struct __initdata x86_init_ops x86_init = {
 
 	.mpparse = {
 		.mpc_record		= x86_init_uint_noop,
+		.setup_ioapic_ids	= x86_init_noop,
 	},
 };
-- 
cgit v1.2.3


From fd6c6661492226bb82f422157c535ac573cbecbd Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 10:41:58 +0200
Subject: x86: Move mpc_apic_id to x86_init_ops

The mpc_apic_id setup is handled by a x86_quirk. Make it a
x86_init_ops function with a default implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/mpspec.h   |  2 ++
 arch/x86/include/asm/setup.h    |  2 --
 arch/x86/include/asm/x86_init.h |  4 ++++
 arch/x86/kernel/apic/numaq_32.c |  2 +-
 arch/x86/kernel/mpparse.c       | 10 ++++++----
 arch/x86/kernel/x86_init.c      |  2 ++
 6 files changed, 15 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index e2a1bb6d71e..03c6a92bfd4 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -62,10 +62,12 @@ extern void get_smp_config(void);
 extern void find_smp_config(void);
 extern void early_reserve_e820_mpc_new(void);
 extern int enable_update_mptable;
+extern int default_mpc_apic_id(struct mpc_cpu *m);
 #else
 static inline void find_smp_config(void) { }
 static inline void early_reserve_e820_mpc_new(void) { }
 #define enable_update_mptable 0
+#define default_mpc_apic_id NULL
 #endif
 
 void __cpuinit generic_processor_info(int apicid, int version);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index cc8b4b0550e..7c7f44f3e4d 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -12,7 +12,6 @@
 /*
  * Any setup quirks to be performed?
  */
-struct mpc_cpu;
 struct mpc_bus;
 struct mpc_oemtable;
 
@@ -25,7 +24,6 @@ struct x86_quirks {
 	int (*mach_get_smp_config)(unsigned int early);
 	int (*mach_find_smp_config)(unsigned int reserve);
 
-	int (*mpc_apic_id)(struct mpc_cpu *m);
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 65985730b37..f2be2a78018 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -1,14 +1,18 @@
 #ifndef _ASM_X86_PLATFORM_H
 #define _ASM_X86_PLATFORM_H
 
+struct mpc_cpu;
+
 /**
  * struct x86_init_mpparse - platform specific mpparse ops
  * @mpc_record:			platform specific mpc record accounting
  * @setup_ioapic_ids:		platform specific ioapic id override
+ * @mpc_apic_id:		platform specific mpc apic id assignment
  */
 struct x86_init_mpparse {
 	void (*mpc_record)(unsigned int mode);
 	void (*setup_ioapic_ids)(void);
+	int (*mpc_apic_id)(struct mpc_cpu *m);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index f3717659265..222413f7e79 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -270,7 +270,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_trap_init			= NULL,
 	.mach_get_smp_config		= NULL,
 	.mach_find_smp_config		= NULL,
-	.mpc_apic_id			= mpc_apic_id,
 	.mpc_oem_bus_info		= mpc_oem_bus_info,
 	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
 	.smp_read_mpc_oem		= smp_read_mpc_oem,
@@ -293,6 +292,7 @@ static __init void early_check_numaq(void)
 		x86_quirks = &numaq_x86_quirks;
 		x86_init.mpparse.mpc_record = numaq_mpc_record;
 		x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
+		x86_init.mpparse.mpc_apic_id = mpc_apic_id;
 	}
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index b2179fdf0ff..04560860a72 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -45,6 +45,11 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 	return sum & 0xFF;
 }
 
+int __init default_mpc_apic_id(struct mpc_cpu *m)
+{
+	return m->apicid;
+}
+
 static void __init MP_processor_info(struct mpc_cpu *m)
 {
 	int apicid;
@@ -55,10 +60,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 		return;
 	}
 
-	if (x86_quirks->mpc_apic_id)
-		apicid = x86_quirks->mpc_apic_id(m);
-	else
-		apicid = m->apicid;
+	apicid = x86_init.mpparse.mpc_apic_id(m);
 
 	if (m->cpuflag & CPU_BOOTPROCESSOR) {
 		bootup_cpu = " (Bootup-CPU)";
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index f4a32b3ab02..08749f2612f 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -6,6 +6,7 @@
 #include <linux/init.h>
 
 #include <asm/bios_ebda.h>
+#include <asm/mpspec.h>
 #include <asm/setup.h>
 #include <asm/e820.h>
 
@@ -28,5 +29,6 @@ struct __initdata x86_init_ops x86_init = {
 	.mpparse = {
 		.mpc_record		= x86_init_uint_noop,
 		.setup_ioapic_ids	= x86_init_noop,
+		.mpc_apic_id		= default_mpc_apic_id,
 	},
 };
-- 
cgit v1.2.3


From 72302142e165313ee58af81bd76708c12b58d7ab Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 12:18:32 +0200
Subject: x86: Move smp_read_mpc_oem to x86_init_ops.

Move smp_read_mpc_oem from quirks to x86_init.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/mpspec.h   | 2 ++
 arch/x86/include/asm/setup.h    | 3 ---
 arch/x86/include/asm/x86_init.h | 3 +++
 arch/x86/kernel/apic/numaq_32.c | 6 +++---
 arch/x86/kernel/mpparse.c       | 8 ++++----
 arch/x86/kernel/x86_init.c      | 1 +
 6 files changed, 13 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 03c6a92bfd4..5de8e92be2d 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -63,11 +63,13 @@ extern void find_smp_config(void);
 extern void early_reserve_e820_mpc_new(void);
 extern int enable_update_mptable;
 extern int default_mpc_apic_id(struct mpc_cpu *m);
+extern void default_smp_read_mpc_oem(struct mpc_table *mpc);
 #else
 static inline void find_smp_config(void) { }
 static inline void early_reserve_e820_mpc_new(void) { }
 #define enable_update_mptable 0
 #define default_mpc_apic_id NULL
+#define default_smp_read_mpc_oem NULL
 #endif
 
 void __cpuinit generic_processor_info(int apicid, int version);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 7c7f44f3e4d..adb5d44d990 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -13,7 +13,6 @@
  * Any setup quirks to be performed?
  */
 struct mpc_bus;
-struct mpc_oemtable;
 
 struct x86_quirks {
 	int (*arch_pre_time_init)(void);
@@ -26,8 +25,6 @@ struct x86_quirks {
 
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
-	void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable,
-				unsigned short oemsize);
 };
 
 extern void x86_quirk_intr_init(void);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f2be2a78018..fc0eef2f5fd 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -2,17 +2,20 @@
 #define _ASM_X86_PLATFORM_H
 
 struct mpc_cpu;
+struct mpc_table;
 
 /**
  * struct x86_init_mpparse - platform specific mpparse ops
  * @mpc_record:			platform specific mpc record accounting
  * @setup_ioapic_ids:		platform specific ioapic id override
  * @mpc_apic_id:		platform specific mpc apic id assignment
+ * @smp_read_mpc_oem:		platform specific oem mpc table setup
  */
 struct x86_init_mpparse {
 	void (*mpc_record)(unsigned int mode);
 	void (*setup_ioapic_ids)(void);
 	int (*mpc_apic_id)(struct mpc_cpu *m);
+	void (*smp_read_mpc_oem)(struct mpc_table *mpc);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 222413f7e79..1bd3b0ed240 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -218,9 +218,9 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 /*
  * Read/parse the MPC oem tables
  */
-static void __init
- smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize)
+static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 {
+	struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr;
 	int count = sizeof(*oemtable);	/* the header size */
 	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
 
@@ -272,7 +272,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mach_find_smp_config		= NULL,
 	.mpc_oem_bus_info		= mpc_oem_bus_info,
 	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
-	.smp_read_mpc_oem		= smp_read_mpc_oem,
 };
 
 static __init void early_check_numaq(void)
@@ -293,6 +292,7 @@ static __init void early_check_numaq(void)
 		x86_init.mpparse.mpc_record = numaq_mpc_record;
 		x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
 		x86_init.mpparse.mpc_apic_id = mpc_apic_id;
+		x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
 	}
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 04560860a72..45abdf63edc 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -293,6 +293,8 @@ static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
 			1, mpc, mpc->length, 1);
 }
 
+void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
+
 static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 {
 	char str[16];
@@ -314,10 +316,8 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 	if (early)
 		return 1;
 
-	if (mpc->oemptr && x86_quirks->smp_read_mpc_oem) {
-		struct mpc_oemtable *oem_table = (void *)(long)mpc->oemptr;
-		x86_quirks->smp_read_mpc_oem(oem_table, mpc->oemsize);
-	}
+	if (mpc->oemptr)
+		x86_init.mpparse.smp_read_mpc_oem(mpc);
 
 	/*
 	 *      Now process the configuration blocks.
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 08749f2612f..fb5d93c077d 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -30,5 +30,6 @@ struct __initdata x86_init_ops x86_init = {
 		.mpc_record		= x86_init_uint_noop,
 		.setup_ioapic_ids	= x86_init_noop,
 		.mpc_apic_id		= default_mpc_apic_id,
+		.smp_read_mpc_oem	= default_smp_read_mpc_oem,
 	},
 };
-- 
cgit v1.2.3


From 52fdb5684660f9fd7129f7bbbe279a02893bacb8 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 12:45:33 +0200
Subject: x86: Move mpc_oem_pci_bus to x86_init_ops

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/setup.h    | 1 -
 arch/x86/include/asm/x86_init.h | 3 +++
 arch/x86/kernel/apic/numaq_32.c | 2 +-
 arch/x86/kernel/mpparse.c       | 4 ++--
 4 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index adb5d44d990..fd2267baba1 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -24,7 +24,6 @@ struct x86_quirks {
 	int (*mach_find_smp_config)(unsigned int reserve);
 
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
-	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 };
 
 extern void x86_quirk_intr_init(void);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index fc0eef2f5fd..404e2d2b06d 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_X86_PLATFORM_H
 #define _ASM_X86_PLATFORM_H
 
+struct mpc_bus;
 struct mpc_cpu;
 struct mpc_table;
 
@@ -10,12 +11,14 @@ struct mpc_table;
  * @setup_ioapic_ids:		platform specific ioapic id override
  * @mpc_apic_id:		platform specific mpc apic id assignment
  * @smp_read_mpc_oem:		platform specific oem mpc table setup
+ * @mpc_oem_pci_bus:		platform specific pci bus setup (default NULL)
  */
 struct x86_init_mpparse {
 	void (*mpc_record)(unsigned int mode);
 	void (*setup_ioapic_ids)(void);
 	int (*mpc_apic_id)(struct mpc_cpu *m);
 	void (*smp_read_mpc_oem)(struct mpc_table *mpc);
+	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 1bd3b0ed240..feebe8eed7d 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -271,7 +271,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.mach_get_smp_config		= NULL,
 	.mach_find_smp_config		= NULL,
 	.mpc_oem_bus_info		= mpc_oem_bus_info,
-	.mpc_oem_pci_bus		= mpc_oem_pci_bus,
 };
 
 static __init void early_check_numaq(void)
@@ -293,6 +292,7 @@ static __init void early_check_numaq(void)
 		x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
 		x86_init.mpparse.mpc_apic_id = mpc_apic_id;
 		x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
+		x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
 	}
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 45abdf63edc..72e1140723c 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -98,8 +98,8 @@ static void __init MP_bus_info(struct mpc_bus *m)
 		mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-		if (x86_quirks->mpc_oem_pci_bus)
-			x86_quirks->mpc_oem_pci_bus(m);
+		if (x86_init.mpparse.mpc_oem_pci_bus)
+			x86_init.mpparse.mpc_oem_pci_bus(m);
 
 		clear_bit(m->busid, mp_bus_not_pci);
 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
-- 
cgit v1.2.3


From 90e1c6969d8711edb888a00ec54c74370f125c8f Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 12:34:47 +0200
Subject: x86: Move oem_bus_info to x86_init_ops

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/mpspec.h   |  6 ++++++
 arch/x86/include/asm/setup.h    |  3 ---
 arch/x86/include/asm/x86_init.h |  2 ++
 arch/x86/kernel/apic/numaq_32.c |  2 +-
 arch/x86/kernel/mpparse.c       | 14 ++++++++------
 arch/x86/kernel/x86_init.c      |  1 +
 6 files changed, 18 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 5de8e92be2d..e3c579efde7 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -64,12 +64,18 @@ extern void early_reserve_e820_mpc_new(void);
 extern int enable_update_mptable;
 extern int default_mpc_apic_id(struct mpc_cpu *m);
 extern void default_smp_read_mpc_oem(struct mpc_table *mpc);
+# ifdef CONFIG_X86_IO_APIC
+extern void default_mpc_oem_bus_info(struct mpc_bus *m, char *str);
+# else
+#  define default_mpc_oem_bus_info NULL
+# endif
 #else
 static inline void find_smp_config(void) { }
 static inline void early_reserve_e820_mpc_new(void) { }
 #define enable_update_mptable 0
 #define default_mpc_apic_id NULL
 #define default_smp_read_mpc_oem NULL
+#define default_mpc_oem_bus_info NULL
 #endif
 
 void __cpuinit generic_processor_info(int apicid, int version);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index fd2267baba1..6121a8ac7b0 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -12,7 +12,6 @@
 /*
  * Any setup quirks to be performed?
  */
-struct mpc_bus;
 
 struct x86_quirks {
 	int (*arch_pre_time_init)(void);
@@ -22,8 +21,6 @@ struct x86_quirks {
 	int (*arch_trap_init)(void);
 	int (*mach_get_smp_config)(unsigned int early);
 	int (*mach_find_smp_config)(unsigned int reserve);
-
-	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
 };
 
 extern void x86_quirk_intr_init(void);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 404e2d2b06d..2833a873a90 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -12,6 +12,7 @@ struct mpc_table;
  * @mpc_apic_id:		platform specific mpc apic id assignment
  * @smp_read_mpc_oem:		platform specific oem mpc table setup
  * @mpc_oem_pci_bus:		platform specific pci bus setup (default NULL)
+ * @mpc_oem_bus_info:		platform specific mpc bus info
  */
 struct x86_init_mpparse {
 	void (*mpc_record)(unsigned int mode);
@@ -19,6 +20,7 @@ struct x86_init_mpparse {
 	int (*mpc_apic_id)(struct mpc_cpu *m);
 	void (*smp_read_mpc_oem)(struct mpc_table *mpc);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
+	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index feebe8eed7d..700273dca68 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -270,7 +270,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_trap_init			= NULL,
 	.mach_get_smp_config		= NULL,
 	.mach_find_smp_config		= NULL,
-	.mpc_oem_bus_info		= mpc_oem_bus_info,
 };
 
 static __init void early_check_numaq(void)
@@ -293,6 +292,7 @@ static __init void early_check_numaq(void)
 		x86_init.mpparse.mpc_apic_id = mpc_apic_id;
 		x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
 		x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
+		x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
 	}
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 72e1140723c..a42f23f1dc7 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -72,16 +72,18 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 }
 
 #ifdef CONFIG_X86_IO_APIC
-static void __init MP_bus_info(struct mpc_bus *m)
+void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str)
 {
-	char str[7];
 	memcpy(str, m->bustype, 6);
 	str[6] = 0;
+	apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
+}
+
+static void __init MP_bus_info(struct mpc_bus *m)
+{
+	char str[7];
 
-	if (x86_quirks->mpc_oem_bus_info)
-		x86_quirks->mpc_oem_bus_info(m, str);
-	else
-		apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
+	x86_init.mpparse.mpc_oem_bus_info(m, str);
 
 #if MAX_MP_BUSSES < 256
 	if (m->busid >= MAX_MP_BUSSES) {
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index fb5d93c077d..27685edc546 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -31,5 +31,6 @@ struct __initdata x86_init_ops x86_init = {
 		.setup_ioapic_ids	= x86_init_noop,
 		.mpc_apic_id		= default_mpc_apic_id,
 		.smp_read_mpc_oem	= default_smp_read_mpc_oem,
+		.mpc_oem_bus_info	= default_mpc_oem_bus_info,
 	},
 };
-- 
cgit v1.2.3


From f840dd5e7424a0c8a7166fc3e87798d0e44d3ce7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 27 Aug 2009 11:58:54 +0900
Subject: sh: Tidy up watchdog build for SH-2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/watchdog.h | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
index f024fed00a7..2fe7cee9e43 100644
--- a/arch/sh/include/asm/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -13,10 +13,18 @@
 #ifdef __KERNEL__
 
 #include <linux/types.h>
+#include <linux/io.h>
+
+#define WTCNT_HIGH	0x5a
+#define WTCSR_HIGH	0xa5
+
+#define WTCSR_CKS2	0x04
+#define WTCSR_CKS1	0x02
+#define WTCSR_CKS0	0x01
+
 #include <cpu/watchdog.h>
-#include <asm/io.h>
 
-/* 
+/*
  * See cpu-sh2/watchdog.h for explanation of this stupidity..
  */
 #ifndef WTCNT_R
@@ -27,13 +35,6 @@
 #  define WTCSR_R	WTCSR
 #endif
 
-#define WTCNT_HIGH	0x5a
-#define WTCSR_HIGH	0xa5
-
-#define WTCSR_CKS2	0x04
-#define WTCSR_CKS1	0x02
-#define WTCSR_CKS0	0x01
-
 /*
  * CKS0-2 supports a number of clock division ratios. At the time the watchdog
  * is enabled, it defaults to a 41 usec overflow period .. we overload this to
-- 
cgit v1.2.3


From e79d57479c86e388051244e1f17851a0e63d1ff0 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Thu, 27 Aug 2009 13:57:26 +0000
Subject: sh: sh7785lcr: fix prototype board on 32bit MMU mode.

Fix up PCA9564 resources on 32bit MMU mode using prototype board.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Tested-by: Raul Porcel <armin76@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig                       |  7 +++++++
 arch/sh/boards/board-sh7785lcr.c             | 18 ++++++++++++++++++
 arch/sh/include/mach-common/mach/sh7785lcr.h |  2 ++
 arch/sh/tools/mach-types                     |  1 +
 4 files changed, 28 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index b66f6d16523..ee5bb200c71 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -171,6 +171,13 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
 	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 	  you can access all on-board device in 29bit address mode.
 
+config SH_SH7785LCR_PT
+	bool "SH7785LCR prototype board on 32-bit MMU mode"
+	depends on SH_SH7785LCR && 32BIT
+	default n
+	help
+	  If you use prototype board, this option is enabled.
+
 config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 42410a15d25..726427c3522 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -223,6 +223,19 @@ static struct platform_device sm501_device = {
 	.resource	= sm501_resources,
 };
 
+static struct resource i2c_proto_resources[] = {
+	[0] = {
+		.start	= PCA9564_PROTO_32BIT_ADDR,
+		.end	= PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct resource i2c_resources[] = {
 	[0] = {
 		.start	= PCA9564_ADDR,
@@ -271,6 +284,11 @@ static int __init sh7785lcr_devices_setup(void)
 	i2c_register_board_info(0, sh7785lcr_i2c_devices,
 				ARRAY_SIZE(sh7785lcr_i2c_devices));
 
+	if (mach_is_sh7785lcr_pt()) {
+		i2c_device.resource = &i2c_proto_resources;
+		i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
+	}
+
 	return platform_add_devices(sh7785lcr_devices,
 				    ARRAY_SIZE(sh7785lcr_devices));
 }
diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h
index 90011d435f3..1292ae5c21b 100644
--- a/arch/sh/include/mach-common/mach/sh7785lcr.h
+++ b/arch/sh/include/mach-common/mach/sh7785lcr.h
@@ -35,6 +35,8 @@
 #define PCA9564_ADDR		0x06000000	/* I2C */
 #define PCA9564_SIZE		0x00000100
 
+#define PCA9564_PROTO_32BIT_ADDR	0x14000000
+
 #define SM107_MEM_ADDR		0x10000000
 #define SM107_MEM_SIZE		0x00e00000
 #define SM107_REG_ADDR		0x13e00000
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index b57362879e0..6639b25d8d5 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -53,6 +53,7 @@ RSK7203			SH_RSK7203
 AP325RXA		SH_AP325RXA
 SH7763RDP		SH_SH7763RDP
 SH7785LCR		SH_SH7785LCR
+SH7785LCR_PT		SH_SH7785LCR_PT
 URQUELL			SH_URQUELL
 ESPT			SH_ESPT
 POLARIS			SH_POLARIS
-- 
cgit v1.2.3


From 762afb7317b1987fa0851135fe4f2947f68c3c2a Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:22 +0000
Subject: powerpc: Remove addr_needs_map in struct dma_mapping_ops

This patch adds max_direct_dma_addr to struct dev_archdata to remove
addr_needs_map in struct dma_mapping_ops. It also converts
dma_capable() to use max_direct_dma_addr.

max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(),
called via ppc_md.pci_dma_dev_setup hook.

For further information:
http://marc.info/?t=124719060200001&r=1&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/device.h          |  3 +++
 arch/powerpc/include/asm/dma-mapping.h     |  8 +++----
 arch/powerpc/include/asm/swiotlb.h         |  5 ++---
 arch/powerpc/kernel/dma-swiotlb.c          | 36 +++++++++++++-----------------
 arch/powerpc/platforms/85xx/mpc8536_ds.c   |  1 +
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   |  1 +
 arch/powerpc/platforms/85xx/mpc85xx_mds.c  |  1 +
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |  1 +
 8 files changed, 28 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 7d2277cef09..0086f8d46f1 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -16,6 +16,9 @@ struct dev_archdata {
 	/* DMA operations on that device */
 	struct dma_mapping_ops	*dma_ops;
 	void			*dma_data;
+#ifdef CONFIG_SWIOTLB
+	dma_addr_t		max_direct_dma_addr;
+#endif
 };
 
 static inline void dev_archdata_set_node(struct dev_archdata *ad,
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 0c34371ec49..1765c379138 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -87,8 +87,6 @@ struct dma_mapping_ops {
 				dma_addr_t dma_address, size_t size,
 				enum dma_data_direction direction,
 				struct dma_attrs *attrs);
-	int		(*addr_needs_map)(struct device *dev, dma_addr_t addr,
-				size_t size);
 #ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
 	void            (*sync_single_range_for_cpu)(struct device *hwdev,
 				dma_addr_t dma_handle, unsigned long offset,
@@ -426,10 +424,12 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
+#ifdef CONFIG_SWIOTLB
+	struct dev_archdata *sd = &dev->archdata;
 
-	if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size))
+	if (sd->max_direct_dma_addr && addr + size > sd->max_direct_dma_addr)
 		return 0;
+#endif
 
 	if (!dev->dma_mask)
 		return 0;
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 30891d6e2bc..31e0e43c880 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -16,12 +16,11 @@
 extern struct dma_mapping_ops swiotlb_dma_ops;
 extern struct dma_mapping_ops swiotlb_pci_dma_ops;
 
-int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t,
-				       size_t size);
-
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
 extern unsigned int ppc_swiotlb_enable;
 int __init swiotlb_setup_bus_notifier(void);
 
+extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev);
+
 #endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index e8a57de85bc..c9f6a302e87 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,26 +24,6 @@
 int swiotlb __read_mostly;
 unsigned int ppc_swiotlb_enable;
 
-/*
- * Determine if an address is reachable by a pci device, or if we must bounce.
- */
-static int
-swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
-	dma_addr_t max;
-	struct pci_controller *hose;
-	struct pci_dev *pdev = to_pci_dev(hwdev);
-
-	hose = pci_bus_to_host(pdev->bus);
-	max = hose->dma_window_base_cur + hose->dma_window_size;
-
-	/* check that we're within mapped pci window space */
-	if ((addr + size > max) | (addr < hose->dma_window_base_cur))
-		return 1;
-
-	return 0;
-}
-
 /*
  * At the moment, all platforms that use this code only require
  * swiotlb to be used if we're operating on HIGHMEM.  Since
@@ -73,22 +53,36 @@ struct dma_mapping_ops swiotlb_pci_dma_ops = {
 	.dma_supported = swiotlb_dma_supported,
 	.map_page = swiotlb_map_page,
 	.unmap_page = swiotlb_unmap_page,
-	.addr_needs_map = swiotlb_pci_addr_needs_map,
 	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
 	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device
 };
 
+void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
+{
+	struct pci_controller *hose;
+	struct dev_archdata *sd;
+
+	hose = pci_bus_to_host(pdev->bus);
+	sd = &pdev->dev.archdata;
+	sd->max_direct_dma_addr =
+		hose->dma_window_base_cur + hose->dma_window_size;
+}
+
 static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
 	struct device *dev = data;
+	struct dev_archdata *sd;
 
 	/* We are only intereted in device addition */
 	if (action != BUS_NOTIFY_ADD_DEVICE)
 		return 0;
 
+	sd = &dev->archdata;
+	sd->max_direct_dma_addr = 0;
+
 	/* May need to bounce if the device can't address all of DRAM */
 	if (dma_get_mask(dev) < lmb_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 055ff417bae..bf052c05610 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -97,6 +97,7 @@ static void __init mpc8536_ds_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 849c0ac0025..c6f92ccd963 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -193,6 +193,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 20a61d0af33..25998b661f2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -256,6 +256,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 }
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 66327024a6a..80323015687 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -106,6 +106,7 @@ mpc86xx_hpcn_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 }
-- 
cgit v1.2.3


From 3702977fa7d1a1a95caa387121fa7c9f4cae35f3 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:23 +0000
Subject: powerpc: Remove swiotlb_pci_dma_ops

Now swiotlb_pci_dma_ops is identical to swiotlb_dma_ops; we can use
swiotlb_dma_ops with any devices. This removes swiotlb_pci_dma_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/swiotlb.h         |  1 -
 arch/powerpc/kernel/dma-swiotlb.c          | 14 --------------
 arch/powerpc/platforms/85xx/mpc8536_ds.c   |  2 +-
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   |  2 +-
 arch/powerpc/platforms/85xx/mpc85xx_mds.c  |  2 +-
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |  2 +-
 6 files changed, 4 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 31e0e43c880..21ce0a3b494 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -14,7 +14,6 @@
 #include <linux/swiotlb.h>
 
 extern struct dma_mapping_ops swiotlb_dma_ops;
-extern struct dma_mapping_ops swiotlb_pci_dma_ops;
 
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index c9f6a302e87..ca141e108ae 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -45,20 +45,6 @@ struct dma_mapping_ops swiotlb_dma_ops = {
 	.sync_sg_for_device = swiotlb_sync_sg_for_device
 };
 
-struct dma_mapping_ops swiotlb_pci_dma_ops = {
-	.alloc_coherent = dma_direct_alloc_coherent,
-	.free_coherent = dma_direct_free_coherent,
-	.map_sg = swiotlb_map_sg_attrs,
-	.unmap_sg = swiotlb_unmap_sg_attrs,
-	.dma_supported = swiotlb_dma_supported,
-	.map_page = swiotlb_map_page,
-	.unmap_page = swiotlb_unmap_page,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
-	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = swiotlb_sync_sg_for_device
-};
-
 void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
 {
 	struct pci_controller *hose;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index bf052c05610..004b7d36cdb 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -96,7 +96,7 @@ static void __init mpc8536_ds_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index c6f92ccd963..544011a562f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -192,7 +192,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 25998b661f2..3909d57b86e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -255,7 +255,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 80323015687..2aa69a69bcc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -105,7 +105,7 @@ mpc86xx_hpcn_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
-- 
cgit v1.2.3


From 45223c549273bbb2c6e1bc6e3629174e8765ad01 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:25 +0000
Subject: powerpc: use dma_map_ops struct

This converts uses dma_map_ops struct (in include/linux/dma-mapping.h)
instead of POWERPC homegrown dma_mapping_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/device.h       |  4 +-
 arch/powerpc/include/asm/dma-mapping.h  | 84 +++++++++------------------------
 arch/powerpc/include/asm/pci.h          |  4 +-
 arch/powerpc/include/asm/swiotlb.h      |  2 +-
 arch/powerpc/kernel/dma-iommu.c         |  2 +-
 arch/powerpc/kernel/dma-swiotlb.c       |  2 +-
 arch/powerpc/kernel/dma.c               |  2 +-
 arch/powerpc/kernel/ibmebus.c           |  2 +-
 arch/powerpc/kernel/pci-common.c        |  6 +--
 arch/powerpc/kernel/vio.c               |  2 +-
 arch/powerpc/platforms/cell/iommu.c     |  2 +-
 arch/powerpc/platforms/ps3/system-bus.c |  4 +-
 12 files changed, 37 insertions(+), 79 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 0086f8d46f1..67fcd7f89d9 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_POWERPC_DEVICE_H
 #define _ASM_POWERPC_DEVICE_H
 
-struct dma_mapping_ops;
+struct dma_map_ops;
 struct device_node;
 
 struct dev_archdata {
@@ -14,7 +14,7 @@ struct dev_archdata {
 	struct device_node	*of_node;
 
 	/* DMA operations on that device */
-	struct dma_mapping_ops	*dma_ops;
+	struct dma_map_ops	*dma_ops;
 	void			*dma_data;
 #ifdef CONFIG_SWIOTLB
 	dma_addr_t		max_direct_dma_addr;
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 1765c379138..8ca2b5183c5 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -63,57 +63,15 @@ static inline unsigned long device_to_mask(struct device *dev)
 	return 0xfffffffful;
 }
 
-/*
- * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
- */
-struct dma_mapping_ops {
-	void *		(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void		(*free_coherent)(struct device *dev, size_t size,
-				void *vaddr, dma_addr_t dma_handle);
-	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	int		(*dma_supported)(struct device *dev, u64 mask);
-	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
-	dma_addr_t 	(*map_page)(struct device *dev, struct page *page,
-				unsigned long offset, size_t size,
-				enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_page)(struct device *dev,
-				dma_addr_t dma_address, size_t size,
-				enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
-	void            (*sync_single_range_for_cpu)(struct device *hwdev,
-				dma_addr_t dma_handle, unsigned long offset,
-				size_t size,
-				enum dma_data_direction direction);
-	void            (*sync_single_range_for_device)(struct device *hwdev,
-				dma_addr_t dma_handle, unsigned long offset,
-				size_t size,
-				enum dma_data_direction direction);
-	void            (*sync_sg_for_cpu)(struct device *hwdev,
-				struct scatterlist *sg, int nelems,
-				enum dma_data_direction direction);
-	void            (*sync_sg_for_device)(struct device *hwdev,
-				struct scatterlist *sg, int nelems,
-				enum dma_data_direction direction);
-#endif
-};
-
 /*
  * Available generic sets of operations
  */
 #ifdef CONFIG_PPC64
-extern struct dma_mapping_ops dma_iommu_ops;
+extern struct dma_map_ops dma_iommu_ops;
 #endif
-extern struct dma_mapping_ops dma_direct_ops;
+extern struct dma_map_ops dma_direct_ops;
 
-static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
 	/* We don't handle the NULL dev case for ISA for now. We could
 	 * do it via an out of line call but it is not needed for now. The
@@ -126,14 +84,14 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 	return dev->archdata.dma_ops;
 }
 
-static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 {
 	dev->archdata.dma_ops = ops;
 }
 
 static inline int dma_supported(struct device *dev, u64 mask)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	if (unlikely(dma_ops == NULL))
 		return 0;
@@ -147,7 +105,7 @@ static inline int dma_supported(struct device *dev, u64 mask)
 
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	if (unlikely(dma_ops == NULL))
 		return -EIO;
@@ -161,7 +119,7 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 
 /*
  * map_/unmap_single actually call through to map/unmap_page now that all the
- * dma_mapping_ops have been converted over. We just have to get the page and
+ * dma_map_ops have been converted over. We just have to get the page and
  * offset to pass through to map_page
  */
 static inline dma_addr_t dma_map_single_attrs(struct device *dev,
@@ -170,7 +128,7 @@ static inline dma_addr_t dma_map_single_attrs(struct device *dev,
 					      enum dma_data_direction direction,
 					      struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -185,7 +143,7 @@ static inline void dma_unmap_single_attrs(struct device *dev,
 					  enum dma_data_direction direction,
 					  struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -198,7 +156,7 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev,
 					    enum dma_data_direction direction,
 					    struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -211,7 +169,7 @@ static inline void dma_unmap_page_attrs(struct device *dev,
 					enum dma_data_direction direction,
 					struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -222,7 +180,7 @@ static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
 				   int nents, enum dma_data_direction direction,
 				   struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
@@ -234,7 +192,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev,
 				      enum dma_data_direction direction,
 				      struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
@@ -243,7 +201,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev,
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
@@ -252,7 +210,7 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 static inline void dma_free_coherent(struct device *dev, size_t size,
 				     void *cpu_addr, dma_addr_t dma_handle)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
@@ -304,7 +262,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 		dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -317,7 +275,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 		dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -330,7 +288,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 		struct scatterlist *sgl, int nents,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -342,7 +300,7 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 		struct scatterlist *sgl, int nents,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -354,7 +312,7 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 		dma_addr_t dma_handle, unsigned long offset, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -367,7 +325,7 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 		dma_addr_t dma_handle, unsigned long offset, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index d9483c504d2..7ae46d7e270 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -61,8 +61,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 
 #ifdef CONFIG_PCI
-extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
-extern struct dma_mapping_ops *get_pci_dma_ops(void);
+extern void set_pci_dma_ops(struct dma_map_ops *dma_ops);
+extern struct dma_map_ops *get_pci_dma_ops(void);
 #else	/* CONFIG_PCI */
 #define set_pci_dma_ops(d)
 #define get_pci_dma_ops()	NULL
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 21ce0a3b494..8979d4cd3d7 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -13,7 +13,7 @@
 
 #include <linux/swiotlb.h>
 
-extern struct dma_mapping_ops swiotlb_dma_ops;
+extern struct dma_map_ops swiotlb_dma_ops;
 
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 2983adac8cc..87ddb3fb948 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -89,7 +89,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		return 1;
 }
 
-struct dma_mapping_ops dma_iommu_ops = {
+struct dma_map_ops dma_iommu_ops = {
 	.alloc_coherent	= dma_iommu_alloc_coherent,
 	.free_coherent	= dma_iommu_free_coherent,
 	.map_sg		= dma_iommu_map_sg,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index ca141e108ae..d1143a68d82 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -31,7 +31,7 @@ unsigned int ppc_swiotlb_enable;
  * map_page, and unmap_page on highmem, use normal dma_ops
  * for everything else.
  */
-struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_map_ops swiotlb_dma_ops = {
 	.alloc_coherent = dma_direct_alloc_coherent,
 	.free_coherent = dma_direct_free_coherent,
 	.map_sg = swiotlb_map_sg_attrs,
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index ccf129d47d8..c61f70e145a 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -140,7 +140,7 @@ static inline void dma_direct_sync_single_range(struct device *dev,
 }
 #endif
 
-struct dma_mapping_ops dma_direct_ops = {
+struct dma_map_ops dma_direct_ops = {
 	.alloc_coherent	= dma_direct_alloc_coherent,
 	.free_coherent	= dma_direct_free_coherent,
 	.map_sg		= dma_direct_map_sg,
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 6e3f6249365..a4c8b38b0ba 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -127,7 +127,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask)
 	return 1;
 }
 
-static struct dma_mapping_ops ibmebus_dma_ops = {
+static struct dma_map_ops ibmebus_dma_ops = {
 	.alloc_coherent = ibmebus_alloc_coherent,
 	.free_coherent  = ibmebus_free_coherent,
 	.map_sg         = ibmebus_map_sg,
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 5a56e97c5ac..7585f1fc26d 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -50,14 +50,14 @@ resource_size_t isa_mem_base;
 unsigned int ppc_pci_flags = 0;
 
 
-static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops;
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
 
-void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
 {
 	pci_dma_ops = dma_ops;
 }
 
-struct dma_mapping_ops *get_pci_dma_ops(void)
+struct dma_map_ops *get_pci_dma_ops(void)
 {
 	return pci_dma_ops;
 }
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 819e59f6f7c..bc7b41edbdf 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -601,7 +601,7 @@ static void vio_dma_iommu_unmap_sg(struct device *dev,
 	vio_cmo_dealloc(viodev, alloc_size);
 }
 
-struct dma_mapping_ops vio_dma_mapping_ops = {
+struct dma_map_ops vio_dma_mapping_ops = {
 	.alloc_coherent = vio_dma_iommu_alloc_coherent,
 	.free_coherent  = vio_dma_iommu_free_coherent,
 	.map_sg         = vio_dma_iommu_map_sg,
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 5b34fc211f3..416db17eb18 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -642,7 +642,7 @@ static int dma_fixed_dma_supported(struct device *dev, u64 mask)
 
 static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
 
-struct dma_mapping_ops dma_iommu_fixed_ops = {
+struct dma_map_ops dma_iommu_fixed_ops = {
 	.alloc_coherent = dma_fixed_alloc_coherent,
 	.free_coherent  = dma_fixed_free_coherent,
 	.map_sg         = dma_fixed_map_sg,
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 676f989ed4e..e34b305a7a5 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -694,7 +694,7 @@ static int ps3_dma_supported(struct device *_dev, u64 mask)
 	return mask >= DMA_BIT_MASK(32);
 }
 
-static struct dma_mapping_ops ps3_sb_dma_ops = {
+static struct dma_map_ops ps3_sb_dma_ops = {
 	.alloc_coherent = ps3_alloc_coherent,
 	.free_coherent = ps3_free_coherent,
 	.map_sg = ps3_sb_map_sg,
@@ -704,7 +704,7 @@ static struct dma_mapping_ops ps3_sb_dma_ops = {
 	.unmap_page = ps3_unmap_page,
 };
 
-static struct dma_mapping_ops ps3_ioc0_dma_ops = {
+static struct dma_map_ops ps3_ioc0_dma_ops = {
 	.alloc_coherent = ps3_alloc_coherent,
 	.free_coherent = ps3_free_coherent,
 	.map_sg = ps3_ioc0_map_sg,
-- 
cgit v1.2.3


From 46bab4e4b45ec522ecd5fa4a0e2b4a6e6d1f153a Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:26 +0000
Subject: powerpc: Use asm-generic/dma-mapping-common.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                   |   6 +-
 arch/powerpc/include/asm/dma-mapping.h | 242 +--------------------------------
 2 files changed, 7 insertions(+), 241 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c0747e8ed7..6078253c6d7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -120,7 +120,7 @@ config PPC
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
-	select HAVE_DMA_ATTRS if PPC64
+	select HAVE_DMA_ATTRS
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
@@ -307,10 +307,6 @@ config SWIOTLB
 	  platforms where the size of a physical address is larger
 	  than the bus address.  Not all platforms support this.
 
-config PPC_NEED_DMA_SYNC_OPS
-	def_bool y
-	depends on (NOT_COHERENT_CACHE || SWIOTLB)
-
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
 	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 8ca2b5183c5..91217e4a0bf 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-attrs.h>
+#include <linux/dma-debug.h>
 #include <asm/io.h>
 #include <asm/swiotlb.h>
 
@@ -89,6 +90,11 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 	dev->archdata.dma_ops = ops;
 }
 
+/* this will be removed soon */
+#define flush_write_buffers()
+
+#include <asm-generic/dma-mapping-common.h>
+
 static inline int dma_supported(struct device *dev, u64 mask)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
@@ -117,87 +123,6 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 	return 0;
 }
 
-/*
- * map_/unmap_single actually call through to map/unmap_page now that all the
- * dma_map_ops have been converted over. We just have to get the page and
- * offset to pass through to map_page
- */
-static inline dma_addr_t dma_map_single_attrs(struct device *dev,
-					      void *cpu_addr,
-					      size_t size,
-					      enum dma_data_direction direction,
-					      struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
-				 (unsigned long)cpu_addr % PAGE_SIZE, size,
-				 direction, attrs);
-}
-
-static inline void dma_unmap_single_attrs(struct device *dev,
-					  dma_addr_t dma_addr,
-					  size_t size,
-					  enum dma_data_direction direction,
-					  struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	dma_ops->unmap_page(dev, dma_addr, size, direction, attrs);
-}
-
-static inline dma_addr_t dma_map_page_attrs(struct device *dev,
-					    struct page *page,
-					    unsigned long offset, size_t size,
-					    enum dma_data_direction direction,
-					    struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	return dma_ops->map_page(dev, page, offset, size, direction, attrs);
-}
-
-static inline void dma_unmap_page_attrs(struct device *dev,
-					dma_addr_t dma_address,
-					size_t size,
-					enum dma_data_direction direction,
-					struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	dma_ops->unmap_page(dev, dma_address, size, direction, attrs);
-}
-
-static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
-				   int nents, enum dma_data_direction direction,
-				   struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
-}
-
-static inline void dma_unmap_sg_attrs(struct device *dev,
-				      struct scatterlist *sg,
-				      int nhwentries,
-				      enum dma_data_direction direction,
-				      struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
-}
-
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
@@ -216,161 +141,6 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries,
-				enum dma_data_direction direction)
-{
-	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
-}
-
-#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_cpu)
-		dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
-					   size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_device)
-		dma_ops->sync_single_range_for_device(dev, dma_handle,
-					      0, size, direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_sg_for_cpu)
-		dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_sg_for_device)
-		dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_cpu)
-		dma_ops->sync_single_range_for_cpu(dev, dma_handle,
-					   offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_device)
-		dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
-					      size, direction);
-}
-#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-}
-#endif
-
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 #ifdef CONFIG_PPC64
-- 
cgit v1.2.3


From 4a9a6bfe707cfe5bcb0a20eabe240293a095cd10 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:27 +0000
Subject: powerpc: Handle SWIOTLB mapping error properly

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h | 5 +++++
 arch/powerpc/kernel/dma-swiotlb.c      | 3 ++-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 91217e4a0bf..4bd41b4051e 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -143,6 +143,11 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	if (dma_ops->mapping_error)
+		return dma_ops->mapping_error(dev, dma_addr);
+
 #ifdef CONFIG_PPC64
 	return (dma_addr == DMA_ERROR_CODE);
 #else
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index d1143a68d82..e96cbbd9b44 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -42,7 +42,8 @@ struct dma_map_ops swiotlb_dma_ops = {
 	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
 	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = swiotlb_sync_sg_for_device
+	.sync_sg_for_device = swiotlb_sync_sg_for_device,
+	.mapping_error = swiotlb_dma_mapping_error,
 };
 
 void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
-- 
cgit v1.2.3


From 80d3e8abb73dad3983fef2597b52cab8fbcd876b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:28 +0000
Subject: powerpc: Add CONFIG_DMA_API_DEBUG support

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                   |  1 +
 arch/powerpc/include/asm/dma-mapping.h | 11 ++++++++++-
 arch/powerpc/kernel/dma.c              | 11 +++++++++++
 3 files changed, 22 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6078253c6d7..9e03991dc87 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -121,6 +121,7 @@ config PPC
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
 	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 4bd41b4051e..cb2ca41dd52 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -127,9 +127,15 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+	void *cpu_addr;
 
 	BUG_ON(!dma_ops);
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+
+	cpu_addr = dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+
+	debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+
+	return cpu_addr;
 }
 
 static inline void dma_free_coherent(struct device *dev, size_t size,
@@ -138,6 +144,9 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
+
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+
 	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index c61f70e145a..21b784d7e7d 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -7,6 +7,7 @@
 
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
 #include <linux/lmb.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
@@ -156,3 +157,13 @@ struct dma_map_ops dma_direct_ops = {
 #endif
 };
 EXPORT_SYMBOL(dma_direct_ops);
+
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+       return 0;
+}
+fs_initcall(dma_init);
-- 
cgit v1.2.3


From e3e1d15855206c85f4c9ed82746e81acfe13e5aa Mon Sep 17 00:00:00 2001
From: Becky Bruce <beckyb@kernel.crashing.org>
Date: Mon, 24 Aug 2009 06:15:36 +0000
Subject: powerpc: Name xpn & x fields in HW Hash PTE format

Previously, the 36-bit code was using these bits, but they had
never been named in the pte format definition.  This patch just
gives those fields their proper names and adds a comment that
they are only present on some processors.

There is no functional code change.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-hash32.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
index 382fc689f20..16f513e5cbd 100644
--- a/arch/powerpc/include/asm/mmu-hash32.h
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -55,21 +55,25 @@ struct ppc_bat {
 
 #ifndef __ASSEMBLY__
 
-/* Hardware Page Table Entry */
+/*
+ * Hardware Page Table Entry
+ * Note that the xpn and x bitfields are used only by processors that
+ * support extended addressing; otherwise, those bits are reserved.
+ */
 struct hash_pte {
 	unsigned long v:1;	/* Entry is valid */
 	unsigned long vsid:24;	/* Virtual segment identifier */
 	unsigned long h:1;	/* Hash algorithm indicator */
 	unsigned long api:6;	/* Abbreviated page index */
 	unsigned long rpn:20;	/* Real (physical) page number */
-	unsigned long    :3;	/* Unused */
+	unsigned long xpn:3;	/* Real page number bits 0-2, optional */
 	unsigned long r:1;	/* Referenced */
 	unsigned long c:1;	/* Changed */
 	unsigned long w:1;	/* Write-thru cache mode */
 	unsigned long i:1;	/* Cache inhibited */
 	unsigned long m:1;	/* Memory coherence */
 	unsigned long g:1;	/* Guarded */
-	unsigned long  :1;	/* Unused */
+	unsigned long x:1;	/* Real page number bit 3, optional */
 	unsigned long pp:2;	/* Page protection */
 };
 
-- 
cgit v1.2.3


From 23e55f92d4fd733365dd572ea6e9e211387123c2 Mon Sep 17 00:00:00 2001
From: Michael Wolf <mjw@linux.vnet.ibm.com>
Date: Thu, 20 Aug 2009 13:21:45 +0000
Subject: powerpc: Adjust base and index registers in Altivec macros

On POWER6 systems RA needs to be the base and RB the index.
If they are reversed you take a misdirect hit.

Signed-off-by: Mike Wolf <mjwolf@us.ibm.com>

----
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc_asm.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index dfae6e916df..498fe09263d 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -98,13 +98,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
 #define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
 #define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
 
-#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,base,b
 #define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
 #define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
 #define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
 #define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
 #define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
-#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,base,b
 #define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
 #define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
 #define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
@@ -112,26 +112,26 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
 #define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
 
 /* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,base,b)
 #define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
 #define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
 #define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
 #define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
 #define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b)
 #define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
 #define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
 #define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
 #define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
 /* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
+#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,base,b)
 #define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
 #define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
 #define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
 #define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
 #define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b)
 #define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
 #define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
 #define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
-- 
cgit v1.2.3


From df5d6ecf8157245ef733db87597adb2c6e2510da Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Mon, 24 Aug 2009 15:52:48 +0000
Subject: powerpc/mm: Add MMU features for TLB reservation & Paired MAS
 registers

Support for TLB reservation (or TLB Write Conditional) and Paired MAS
registers are optional for a processor implementation so we handle
them via MMU feature sections.

We currently only used paired MAS registers to access the full RPN + perm
bits that are kept in MAS7||MAS3.  We assume that if an implementation has
hardware page table at this time it also implements in TLB reservations.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu.h |  9 +++++++++
 arch/powerpc/mm/tlb_low_64e.S  | 38 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 46 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 2fcfefc6089..7ffbb65ff7a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -58,6 +58,15 @@
  */
 #define MMU_FTR_TLBIE_206		ASM_CONST(0x00400000)
 
+/* Enable use of TLB reservation.  Processor should support tlbsrx.
+ * instruction and MAS0[WQ].
+ */
+#define MMU_FTR_USE_TLBRSRV		ASM_CONST(0x00800000)
+
+/* Use paired MAS registers (MAS7||MAS3, etc.)
+ */
+#define MMU_FTR_USE_PAIRED_MAS		ASM_CONST(0x01000000)
+
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index cd92f62f9cf..ef1cccf7117 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -189,12 +189,16 @@ normal_tlb_miss:
 	clrrdi	r14,r14,3
 	or	r10,r15,r14
 
+BEGIN_MMU_FTR_SECTION
 	/* Set the TLB reservation and seach for existing entry. Then load
 	 * the entry.
 	 */
 	PPC_TLBSRX_DOT(0,r16)
 	ld	r14,0(r10)
 	beq	normal_tlb_miss_done
+MMU_FTR_SECTION_ELSE
+	ld	r14,0(r10)
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
 
 finish_normal_tlb_miss:
 	/* Check if required permissions are met */
@@ -241,7 +245,14 @@ finish_normal_tlb_miss:
 	bne	1f
 	li	r11,MAS3_SW|MAS3_UW
 	andc	r15,r15,r11
-1:	mtspr	SPRN_MAS7_MAS3,r15
+1:
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r15,32
+	mtspr	SPRN_MAS3,r15
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+	mtspr	SPRN_MAS7_MAS3,r15
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
@@ -311,11 +322,13 @@ virt_page_table_tlb_miss:
 	rlwinm	r10,r10,0,16,1			/* Clear TID */
 	mtspr	SPRN_MAS1,r10
 1:
+BEGIN_MMU_FTR_SECTION
 	/* Search if we already have a TLB entry for that virtual address, and
 	 * if we do, bail out.
 	 */
 	PPC_TLBSRX_DOT(0,r16)
 	beq	virt_page_table_tlb_miss_done
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
 
 	/* Now, we need to walk the page tables. First check if we are in
 	 * range.
@@ -367,10 +380,18 @@ virt_page_table_tlb_miss:
 	 */
 	clrldi	r11,r15,4		/* remove region ID from RPN */
 	ori	r10,r11,1		/* Or-in SR */
+
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r10,32
+	mtspr	SPRN_MAS3,r10
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
 	mtspr	SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
+BEGIN_MMU_FTR_SECTION
 virt_page_table_tlb_miss_done:
 
 	/* We have overriden MAS2:EPN but currently our primary TLB miss
@@ -394,6 +415,7 @@ virt_page_table_tlb_miss_done:
 	addi	r10,r11,-4
 	std	r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
 1:
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
 	/* Return to caller, normal case */
 	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK);
 	TLB_MISS_EPILOG_SUCCESS
@@ -618,7 +640,14 @@ htw_tlb_miss:
 #else
 	ori	r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
 #endif
+
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r10,32
+	mtspr	SPRN_MAS3,r10
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
 	mtspr	SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
@@ -700,7 +729,14 @@ tlb_load_linear:
 	clrrdi	r10,r16,30		/* 1G page index */
 	clrldi	r10,r10,4		/* clear region bits */
 	ori	r10,r10,MAS3_SR|MAS3_SW|MAS3_SX
+
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r10,32
+	mtspr	SPRN_MAS3,r10
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
 	mtspr	SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
-- 
cgit v1.2.3


From f45c4486f70d0a6502e7499a8664cdc0bba84cd2 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:30 +0000
Subject: powerpc/book3e-64: Move the default cpu table entry

Move the default cpu entry table for CONFIG_PPC_BOOK3E_64 to the
very end since we will probably want to support both 32-bit and
64-bit kernels for some processors that are higher up in the list.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 49 +++++++++++++++++++++++-------------------
 1 file changed, 27 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 9f38ecb1785..0b9c9135922 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -89,8 +89,12 @@ extern void __restore_cpu_power7(void);
 #define COMMON_USER_PA6T	(COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_HAS_ALTIVEC_COMP)
+#ifdef CONFIG_PPC_BOOK3E_64
+#define COMMON_USER_BOOKE	(COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)
+#else
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
+#endif
 
 static struct cpu_spec __initdata cpu_specs[] = {
 #ifdef CONFIG_PPC_BOOK3S_64
@@ -509,28 +513,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.platform		= "power4",
 	}
 #endif	/* CONFIG_PPC_BOOK3S_64 */
-#ifdef CONFIG_PPC_BOOK3E_64
-	{	/* This is a default entry to get going, to be replaced by
-		 * a real one at some stage
-		 */
-#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
-	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
-	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
-		.pvr_mask		= 0x00000000,
-		.pvr_value		= 0x00000000,
-		.cpu_name		= "Book3E",
-		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
-					  MMU_FTR_USE_TLBIVAX_BCAST |
-					  MMU_FTR_LOCK_BCAST_INVAL,
-		.icache_bsize		= 64,
-		.dcache_bsize		= 64,
-		.num_pmcs		= 0,
-		.machine_check		= machine_check_generic,
-		.platform		= "power6",
-	},
-#endif
 
 #ifdef CONFIG_PPC32
 #if CLASSIC_PPC
@@ -1846,6 +1828,29 @@ static struct cpu_spec __initdata cpu_specs[] = {
 	}
 #endif /* CONFIG_E500 */
 #endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC_BOOK3E_64
+	{	/* This is a default entry to get going, to be replaced by
+		 * a real one at some stage
+		 */
+#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "Book3E",
+		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
+					  MMU_FTR_USE_TLBIVAX_BCAST |
+					  MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 0,
+		.machine_check		= machine_check_generic,
+		.platform		= "power6",
+	},
+#endif
 };
 
 static struct cpu_spec the_cpu_spec;
-- 
cgit v1.2.3


From 6c188829d2c20a1d02aedb13db34b3ca2a8f0dc4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:31 +0000
Subject: powerpc/book3e-64: Wait til generic_calibrate_decr to enable
 decrementer

Match what we do on 32-bit Book-E processors and enable the decrementer
in generic_calibrate_decr.  We need to make sure we disable the
decrementer early in boot since we currently use lazy (soft) interrupt
on 64-bit Book-E and possible get a decrementer exception before we
are ready for it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/exceptions-64e.S | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 695d4847d22..3611b0e7d46 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -774,9 +774,11 @@ _STATIC(init_thread_book3e)
 	/* Make sure interrupts are off */
 	wrteei	0
 
-	/* disable watchdog and FIT and enable DEC interrupts */
-	lis	r3,TCR_DIE@h
+	/* disable all timers and clear out status */
+	li	r3,0
 	mtspr	SPRN_TCR,r3
+	mfspr	r3,SPRN_TSR
+	mtspr	SPRN_TSR,r3
 
 	blr
 
-- 
cgit v1.2.3


From 4b98d9e713a03bd79ced8800e24a56359f9effbf Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:32 +0000
Subject: powerpc/book3e-64: Add helper function to setup IVORs

Not all 64-bit Book-3E parts will have fixed IVORs so add a function that
cpusetup code can call to setup the base IVORs (0..15) to match the fixed
offsets.  We need to 'or' part of interrupt_base_book3e into the IVORs
since on parts that have them the IVPR doesn't extend as far down.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64e.h |  4 ++++
 arch/powerpc/kernel/exceptions-64e.S     | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index 94cb3d79d12..6d53f311d94 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -196,6 +196,10 @@ exc_##label##_book3e:
 #define TLB_MISS_STATS_SAVE_INFO
 #endif
 
+#define SET_IVOR(vector_number, vector_offset)	\
+	li	r3,vector_offset@l; 		\
+	ori	r3,r3,interrupt_base_book3e@l;	\
+	mtspr	SPRN_IVOR##vector_number,r3;
 
 #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
 
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 3611b0e7d46..662236c7224 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -782,5 +782,24 @@ _STATIC(init_thread_book3e)
 
 	blr
 
+_GLOBAL(__setup_base_ivors)
+	SET_IVOR(0, 0x020) /* Critical Input */
+	SET_IVOR(1, 0x000) /* Machine Check */
+	SET_IVOR(2, 0x060) /* Data Storage */ 
+	SET_IVOR(3, 0x080) /* Instruction Storage */
+	SET_IVOR(4, 0x0a0) /* External Input */ 
+	SET_IVOR(5, 0x0c0) /* Alignment */ 
+	SET_IVOR(6, 0x0e0) /* Program */ 
+	SET_IVOR(7, 0x100) /* FP Unavailable */ 
+	SET_IVOR(8, 0x120) /* System Call */ 
+	SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ 
+	SET_IVOR(10, 0x160) /* Decrementer */ 
+	SET_IVOR(11, 0x180) /* Fixed Interval Timer */ 
+	SET_IVOR(12, 0x1a0) /* Watchdog Timer */ 
+	SET_IVOR(13, 0x1c0) /* Data TLB Error */ 
+	SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
+	SET_IVOR(15, 0x040) /* Debug */
 
+	sync
 
+	blr
-- 
cgit v1.2.3


From bb1af71ecbfdbecbe9f7e43f703da5840b76c2e4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:33 +0000
Subject: powerpc/book3e-64: Add support to initial_tlb_book3e for non-HES TLB

We now search through TLBnCFG looking for the first array that has IPROT
support (we assume that there is only one).  If that TLB has hardware
entry select (HES) support we use the existing code and with the proper
TLB select (the HES code still needs to clean up bolted entries from
firmware).  The non-HES code is pretty similiar to the 32-bit FSL Book-E
code but does make some new assumtions (like that we have tlbilx) and
simplifies things down a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg_booke.h |   2 +
 arch/powerpc/kernel/exceptions-64e.S | 204 ++++++++++++++++++++++++++++++++++-
 2 files changed, 202 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 9bb81d99b76..3bf78350552 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -108,6 +108,8 @@
 #define SPRN_PID2	0x27A	/* Process ID Register 2 */
 #define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
 #define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
+#define SPRN_TLB2CFG	0x2B2	/* TLB 2 Config Register */
+#define SPRN_TLB3CFG	0x2B3	/* TLB 3 Config Register */
 #define SPRN_EPR	0x2BE	/* External Proxy Register */
 #define SPRN_CCR1	0x378	/* Core Configuration Register 1 */
 #define SPRN_ZPR	0x3B0	/* Zone Protection Register (40x) */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 662236c7224..9048f96237f 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -616,18 +616,214 @@ bad_stack_book3e:
  * Setup the initial TLB for a core. This current implementation
  * assume that whatever we are running off will not conflict with
  * the new mapping at PAGE_OFFSET.
- * We also make various assumptions about the processor we run on,
- * this might have to be made more flexible based on the content
- * of MMUCFG and friends.
  */
 _GLOBAL(initial_tlb_book3e)
 
+	/* Look for the first TLB with IPROT set */
+	mfspr	r4,SPRN_TLB0CFG
+	andi.	r3,r4,TLBnCFG_IPROT
+	lis	r3,MAS0_TLBSEL(0)@h
+	bne	found_iprot
+
+	mfspr	r4,SPRN_TLB1CFG
+	andi.	r3,r4,TLBnCFG_IPROT
+	lis	r3,MAS0_TLBSEL(1)@h
+	bne	found_iprot
+
+	mfspr	r4,SPRN_TLB2CFG
+	andi.	r3,r4,TLBnCFG_IPROT
+	lis	r3,MAS0_TLBSEL(2)@h
+	bne	found_iprot
+
+	lis	r3,MAS0_TLBSEL(3)@h
+	mfspr	r4,SPRN_TLB3CFG
+	/* fall through */
+
+found_iprot:
+	andi.	r5,r4,TLBnCFG_HES
+	bne	have_hes
+
+	mflr	r8				/* save LR */
+/* 1. Find the index of the entry we're executing in
+ *
+ * r3 = MAS0_TLBSEL (for the iprot array)
+ * r4 = SPRN_TLBnCFG
+ */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7,SPRN_PID
+	slwi	r7,r7,16
+	or	r7,r7,r5
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID */
+
+	mfspr	r3,SPRN_MAS0
+	rlwinm	r5,r3,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r4 = SPRN_TLBnCFG
+ * r5 = ESEL of entry we are running in
+ */
+	andi.	r4,r4,TLBnCFG_N_ENTRY		/* Extract # entries */
+	li	r6,0				/* Set Entry counter to 0 */
+1:	mr	r7,r3				/* Set MAS0(TLBSEL) */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r5,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r4				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate all TLBs */
+	PPC_TLBILX_ALL(0,0)
+	sync
+	isync
+
+/* 3. Setup a temp mapping and jump to it
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r5 = ESEL of entry we are running in
+ */
+	andi.	r7,r5,0x1	/* Find an entry not used and is non-zero */
+	addi	r7,r7,0x1
+	mr	r4,r3		/* Set MAS0(TLBSEL) = 1 */
+	mtspr	SPRN_MAS0,r4
+	tlbre
+
+	rlwimi	r4,r7,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r7) */
+	mtspr	SPRN_MAS0,r4
+
+	mfspr	r7,SPRN_MAS1
+	xori	r6,r7,MAS1_TS		/* Setup TMP mapping in the other Address space */
+	mtspr	SPRN_MAS1,r6
+
+	tlbwe
+
+	mfmsr	r6
+	xori	r6,r6,MSR_IS
+	mtspr	SPRN_SRR1,r6
+	bl	1f		/* Find our address */
+1:	mflr	r6
+	addi	r6,r6,(2f - 1b)
+	mtspr	SPRN_SRR0,r6
+	rfi
+2:
+
+/* 4. Clear out PIDs & Search info
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+	li	r6,0
+	mtspr   SPRN_MAS6,r6
+	mtspr	SPRN_PID,r6
+
+/* 5. Invalidate mapping we started in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+	mtspr	SPRN_MAS0,r3
+	tlbre
+	mfspr	r6,SPRN_MAS1
+	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+
+	/* Invalidate TLB1 */
+	PPC_TLBILX_ALL(0,0)
+	sync
+	isync
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP	MAS2_M
+#else
+#define M_IF_SMP	0
+#endif
+
+/* 6. Setup KERNELBASE mapping in TLB[0]
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+	rlwinm	r3,r3,0,16,3	/* clear ESEL */
+	mtspr	SPRN_MAS0,r3
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+	mtspr	SPRN_MAS1,r6
+
+	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP)
+	mtspr	SPRN_MAS2,r6
+
+	rlwinm	r5,r5,0,0,25
+	ori	r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
+	mtspr	SPRN_MAS3,r5
+	li	r5,-1
+	rlwinm	r5,r5,0,0,25
+
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ */
+	/* Now we branch the new virtual address mapped by this entry */
+	LOAD_REG_IMMEDIATE(r6,2f)
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+2:
+
+/* 8. Clear out the temp mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ */
+	mtspr	SPRN_MAS0,r4
+	tlbre
+	mfspr	r5,SPRN_MAS1
+	rlwinm	r5,r5,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r5
+	tlbwe
+
+	/* Invalidate TLB1 */
+	PPC_TLBILX_ALL(0,0)
+	sync
+	isync
+
+	/* We translate LR and return */
+	tovirt(r8,r8)
+	mtlr	r8
+	blr
+
+have_hes:
 	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
 	 * kernel linear mapping. We also set MAS8 once for all here though
 	 * that will have to be made dependent on whether we are running under
 	 * a hypervisor I suppose.
 	 */
-	li	r3,MAS0_HES | MAS0_WQ_ALLWAYS
+	ori	r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS
 	mtspr	SPRN_MAS0,r3
 	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
 	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
-- 
cgit v1.2.3


From ae14e13a4c8bb091dfd5606fd76c9cd272090ab7 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 25 Aug 2009 20:07:02 +0000
Subject: powerpc/pci: Remove dead checks for CONFIG_PPC_OF

PPC_OF is always selected for arch/powerpc.  This patch removes the stale
#defines

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-common.c | 8 --------
 arch/powerpc/kernel/pci_32.c     | 9 ---------
 2 files changed, 17 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 7585f1fc26d..158a78ae634 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -176,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_domain_nr);
 
-#ifdef CONFIG_PPC_OF
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -210,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev,
 	return sprintf(buf, "%s", np->full_name);
 }
 static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-#endif /* CONFIG_PPC_OF */
 
 /* Add sysfs properties */
 int pcibios_add_platform_entries(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PPC_OF
 	return device_create_file(&pdev->dev, &dev_attr_devspec);
-#else
-	return 0;
-#endif /* CONFIG_PPC_OF */
-
 }
 
 char __devinit *pcibios_setup(char *str)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 3ae1c666ff9..1e807fe7ad2 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -34,9 +34,7 @@ int pcibios_assign_bus_offset = 1;
 void pcibios_make_OF_bus_map(void);
 
 static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
 static u8* pci_to_OF_bus_map;
-#endif
 
 /* By default, we don't re-assign bus numbers. We do this only on
  * some pmacs
@@ -83,7 +81,6 @@ fixup_cpc710_pci64(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
 
-#ifdef CONFIG_PPC_OF
 /*
  * Functions below are used on OpenFirmware machines.
  */
@@ -357,12 +354,6 @@ pci_create_OF_bus_map(void)
 	}
 }
 
-#else /* CONFIG_PPC_OF */
-void pcibios_make_OF_bus_map(void)
-{
-}
-#endif /* CONFIG_PPC_OF */
-
 static void __devinit pcibios_scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;
-- 
cgit v1.2.3


From fbe65447197789a3ccccc27755956f6a4c445089 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 25 Aug 2009 20:07:11 +0000
Subject: powerpc/pci: move pci_64.c device tree scanning code into
 pci-common.c

The PCI device tree scanning code in pci_64.c is some useful functionality.
It allows PCI devices to be described in the device tree instead of being
probed for, which in turn allows pci devices to use all of the device tree
facilities to describe complex PCI bus architectures like GPIO and IRQ
routing (perhaps not a common situation for desktop or server systems,
but useful for embedded systems with on-board PCI devices).

This patch moves the device tree scanning into pci-common.c so it is
available for 32-bit powerpc machines too.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pci-bridge.h |   5 -
 arch/powerpc/include/asm/pci.h        |   5 +
 arch/powerpc/kernel/Makefile          |   2 +-
 arch/powerpc/kernel/pci-common.c      |   1 -
 arch/powerpc/kernel/pci_64.c          | 289 ---------------------------
 arch/powerpc/kernel/pci_of_scan.c     | 358 ++++++++++++++++++++++++++++++++++
 6 files changed, 364 insertions(+), 296 deletions(-)
 create mode 100644 arch/powerpc/kernel/pci_of_scan.c

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 4c61fa0b8d7..3faf575f6b0 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -284,11 +284,6 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
 extern int pcibios_unmap_io_space(struct pci_bus *bus);
 extern int pcibios_map_io_space(struct pci_bus *bus);
 
-/* Return values for ppc_md.pci_probe_mode function */
-#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
-#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
-#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
-
 #ifdef CONFIG_NUMA
 #define PHB_SET_NODE(PHB, NODE)		((PHB)->node = (NODE))
 #else
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 7ae46d7e270..b856a837b4a 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -22,6 +22,11 @@
 
 #include <asm-generic/pci-dma-compat.h>
 
+/* Return values for ppc_md.pci_probe_mode function */
+#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
+#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
+#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
+
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
 
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 7c83edbc215..569f79ccd31 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -88,7 +88,7 @@ obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
 obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
-				   pci-common.o
+				   pci-common.o pci_of_scan.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
 				   machine_kexec_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 158a78ae634..725ea9144e3 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1617,4 +1617,3 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 
 }
-
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9e8902fa14c..4d5b4ced7e4 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,295 +43,6 @@ unsigned long pci_probe_only = 1;
 unsigned long pci_io_base = ISA_IO_BASE;
 EXPORT_SYMBOL(pci_io_base);
 
-static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
-{
-	const u32 *prop;
-	int len;
-
-	prop = of_get_property(np, name, &len);
-	if (prop && len >= 4)
-		return *prop;
-	return def;
-}
-
-static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
-{
-	unsigned int flags = 0;
-
-	if (addr0 & 0x02000000) {
-		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
-		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
-		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
-		if (addr0 & 0x40000000)
-			flags |= IORESOURCE_PREFETCH
-				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
-		/* Note: We don't know whether the ROM has been left enabled
-		 * by the firmware or not. We mark it as disabled (ie, we do
-		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
-		 * do a config space read, it will be force-enabled if needed
-		 */
-		if (!bridge && (addr0 & 0xff) == 0x30)
-			flags |= IORESOURCE_READONLY;
-	} else if (addr0 & 0x01000000)
-		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-	if (flags)
-		flags |= IORESOURCE_SIZEALIGN;
-	return flags;
-}
-
-
-static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
-{
-	u64 base, size;
-	unsigned int flags;
-	struct resource *res;
-	const u32 *addrs;
-	u32 i;
-	int proplen;
-
-	addrs = of_get_property(node, "assigned-addresses", &proplen);
-	if (!addrs)
-		return;
-	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
-	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0], 0);
-		if (!flags)
-			continue;
-		base = of_read_number(&addrs[1], 2);
-		size = of_read_number(&addrs[3], 2);
-		if (!size)
-			continue;
-		i = addrs[0] & 0xff;
-		pr_debug("  base: %llx, size: %llx, i: %x\n",
-			 (unsigned long long)base,
-			 (unsigned long long)size, i);
-
-		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
-			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
-		} else if (i == dev->rom_base_reg) {
-			res = &dev->resource[PCI_ROM_RESOURCE];
-			flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
-		} else {
-			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
-			continue;
-		}
-		res->start = base;
-		res->end = base + size - 1;
-		res->flags = flags;
-		res->name = pci_name(dev);
-	}
-}
-
-struct pci_dev *of_create_pci_dev(struct device_node *node,
-				 struct pci_bus *bus, int devfn)
-{
-	struct pci_dev *dev;
-	const char *type;
-
-	dev = alloc_pci_dev();
-	if (!dev)
-		return NULL;
-	type = of_get_property(node, "device_type", NULL);
-	if (type == NULL)
-		type = "";
-
-	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
-
-	dev->bus = bus;
-	dev->sysdata = node;
-	dev->dev.parent = bus->bridge;
-	dev->dev.bus = &pci_bus_type;
-	dev->devfn = devfn;
-	dev->multifunction = 0;		/* maybe a lie? */
-
-	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
-	dev->device = get_int_prop(node, "device-id", 0xffff);
-	dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
-	dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
-
-	dev->cfg_size = pci_cfg_space_size(dev);
-
-	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
-		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-	dev->class = get_int_prop(node, "class-code", 0);
-	dev->revision = get_int_prop(node, "revision-id", 0);
-
-	pr_debug("    class: 0x%x\n", dev->class);
-	pr_debug("    revision: 0x%x\n", dev->revision);
-
-	dev->current_state = 4;		/* unknown power state */
-	dev->error_state = pci_channel_io_normal;
-	dev->dma_mask = 0xffffffff;
-
-	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
-		/* a PCI-PCI bridge */
-		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
-		dev->rom_base_reg = PCI_ROM_ADDRESS1;
-	} else if (!strcmp(type, "cardbus")) {
-		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
-	} else {
-		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
-		dev->rom_base_reg = PCI_ROM_ADDRESS;
-		/* Maybe do a default OF mapping here */
-		dev->irq = NO_IRQ;
-	}
-
-	pci_parse_of_addrs(node, dev);
-
-	pr_debug("    adding to system ...\n");
-
-	pci_device_add(dev, bus);
-
-	return dev;
-}
-EXPORT_SYMBOL(of_create_pci_dev);
-
-static void __devinit __of_scan_bus(struct device_node *node,
-				    struct pci_bus *bus, int rescan_existing)
-{
-	struct device_node *child;
-	const u32 *reg;
-	int reglen, devfn;
-	struct pci_dev *dev;
-
-	pr_debug("of_scan_bus(%s) bus no %d... \n",
-		 node->full_name, bus->number);
-
-	/* Scan direct children */
-	for_each_child_of_node(node, child) {
-		pr_debug("  * %s\n", child->full_name);
-		reg = of_get_property(child, "reg", &reglen);
-		if (reg == NULL || reglen < 20)
-			continue;
-		devfn = (reg[0] >> 8) & 0xff;
-
-		/* create a new pci_dev for this device */
-		dev = of_create_pci_dev(child, bus, devfn);
-		if (!dev)
-			continue;
-		pr_debug("    dev header type: %x\n", dev->hdr_type);
-	}
-
-	/* Apply all fixups necessary. We don't fixup the bus "self"
-	 * for an existing bridge that is being rescanned
-	 */
-	if (!rescan_existing)
-		pcibios_setup_bus_self(bus);
-	pcibios_setup_bus_devices(bus);
-
-	/* Now scan child busses */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
-		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
-			struct device_node *child = pci_device_to_OF_node(dev);
-			if (dev)
-				of_scan_pci_bridge(child, dev);
-		}
-	}
-}
-
-void __devinit of_scan_bus(struct device_node *node,
-			   struct pci_bus *bus)
-{
-	__of_scan_bus(node, bus, 0);
-}
-EXPORT_SYMBOL_GPL(of_scan_bus);
-
-void __devinit of_rescan_bus(struct device_node *node,
-			     struct pci_bus *bus)
-{
-	__of_scan_bus(node, bus, 1);
-}
-EXPORT_SYMBOL_GPL(of_rescan_bus);
-
-void __devinit of_scan_pci_bridge(struct device_node *node,
-				  struct pci_dev *dev)
-{
-	struct pci_bus *bus;
-	const u32 *busrange, *ranges;
-	int len, i, mode;
-	struct resource *res;
-	unsigned int flags;
-	u64 size;
-
-	pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
-
-	/* parse bus-range property */
-	busrange = of_get_property(node, "bus-range", &len);
-	if (busrange == NULL || len != 8) {
-		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
-		       node->full_name);
-		return;
-	}
-	ranges = of_get_property(node, "ranges", &len);
-	if (ranges == NULL) {
-		printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
-		       node->full_name);
-		return;
-	}
-
-	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
-	if (!bus) {
-		printk(KERN_ERR "Failed to create pci bus for %s\n",
-		       node->full_name);
-		return;
-	}
-
-	bus->primary = dev->bus->number;
-	bus->subordinate = busrange[1];
-	bus->bridge_ctl = 0;
-	bus->sysdata = node;
-
-	/* parse ranges property */
-	/* PCI #address-cells == 3 and #size-cells == 2 always */
-	res = &dev->resource[PCI_BRIDGE_RESOURCES];
-	for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
-		res->flags = 0;
-		bus->resource[i] = res;
-		++res;
-	}
-	i = 1;
-	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0], 1);
-		size = of_read_number(&ranges[6], 2);
-		if (flags == 0 || size == 0)
-			continue;
-		if (flags & IORESOURCE_IO) {
-			res = bus->resource[0];
-			if (res->flags) {
-				printk(KERN_ERR "PCI: ignoring extra I/O range"
-				       " for bridge %s\n", node->full_name);
-				continue;
-			}
-		} else {
-			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
-				printk(KERN_ERR "PCI: too many memory ranges"
-				       " for bridge %s\n", node->full_name);
-				continue;
-			}
-			res = bus->resource[i];
-			++i;
-		}
-		res->start = of_read_number(&ranges[1], 2);
-		res->end = res->start + size - 1;
-		res->flags = flags;
-	}
-	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
-		bus->number);
-	pr_debug("    bus name: %s\n", bus->name);
-
-	mode = PCI_PROBE_NORMAL;
-	if (ppc_md.pci_probe_mode)
-		mode = ppc_md.pci_probe_mode(bus);
-	pr_debug("    probe mode: %d\n", mode);
-
-	if (mode == PCI_PROBE_DEVTREE)
-		of_scan_bus(node, bus);
-	else if (mode == PCI_PROBE_NORMAL)
-		pci_scan_child_bus(bus);
-}
-EXPORT_SYMBOL(of_scan_pci_bridge);
-
 void __devinit scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
new file mode 100644
index 00000000000..72c31bcb7aa
--- /dev/null
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -0,0 +1,358 @@
+/*
+ * Helper routines to scan the device tree for PCI devices and busses
+ *
+ * Migrated out of PowerPC architecture pci_64.c file by Grant Likely
+ * <grant.likely@secretlab.ca> so that these routines are available for
+ * 32 bit also.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ *   Rework, based on alpha PCI code.
+ * Copyright (c) 2009 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+
+/**
+ * get_int_prop - Decode a u32 from a device tree property
+ */
+static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
+{
+	const u32 *prop;
+	int len;
+
+	prop = of_get_property(np, name, &len);
+	if (prop && len >= 4)
+		return *prop;
+	return def;
+}
+
+/**
+ * pci_parse_of_flags - Parse the flags cell of a device tree PCI address
+ * @addr0: value of 1st cell of a device tree PCI address.
+ * @bridge: Set this flag if the address is from a bridge 'ranges' property
+ */
+unsigned int pci_parse_of_flags(u32 addr0, int bridge)
+{
+	unsigned int flags = 0;
+
+	if (addr0 & 0x02000000) {
+		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
+		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
+		if (addr0 & 0x40000000)
+			flags |= IORESOURCE_PREFETCH
+				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
+		/* Note: We don't know whether the ROM has been left enabled
+		 * by the firmware or not. We mark it as disabled (ie, we do
+		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+		 * do a config space read, it will be force-enabled if needed
+		 */
+		if (!bridge && (addr0 & 0xff) == 0x30)
+			flags |= IORESOURCE_READONLY;
+	} else if (addr0 & 0x01000000)
+		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+	if (flags)
+		flags |= IORESOURCE_SIZEALIGN;
+	return flags;
+}
+
+/**
+ * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node
+ * @node: device tree node for the PCI device
+ * @dev: pci_dev structure for the device
+ *
+ * This function parses the 'assigned-addresses' property of a PCI devices'
+ * device tree node and writes them into the associated pci_dev structure.
+ */
+static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
+{
+	u64 base, size;
+	unsigned int flags;
+	struct resource *res;
+	const u32 *addrs;
+	u32 i;
+	int proplen;
+
+	addrs = of_get_property(node, "assigned-addresses", &proplen);
+	if (!addrs)
+		return;
+	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
+	for (; proplen >= 20; proplen -= 20, addrs += 5) {
+		flags = pci_parse_of_flags(addrs[0], 0);
+		if (!flags)
+			continue;
+		base = of_read_number(&addrs[1], 2);
+		size = of_read_number(&addrs[3], 2);
+		if (!size)
+			continue;
+		i = addrs[0] & 0xff;
+		pr_debug("  base: %llx, size: %llx, i: %x\n",
+			 (unsigned long long)base,
+			 (unsigned long long)size, i);
+
+		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
+			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
+		} else if (i == dev->rom_base_reg) {
+			res = &dev->resource[PCI_ROM_RESOURCE];
+			flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+		} else {
+			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+			continue;
+		}
+		res->start = base;
+		res->end = base + size - 1;
+		res->flags = flags;
+		res->name = pci_name(dev);
+	}
+}
+
+/**
+ * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev
+ * @node: device tree node pointer
+ * @bus: bus the device is sitting on
+ * @devfn: PCI function number, extracted from device tree by caller.
+ */
+struct pci_dev *of_create_pci_dev(struct device_node *node,
+				 struct pci_bus *bus, int devfn)
+{
+	struct pci_dev *dev;
+	const char *type;
+
+	dev = alloc_pci_dev();
+	if (!dev)
+		return NULL;
+	type = of_get_property(node, "device_type", NULL);
+	if (type == NULL)
+		type = "";
+
+	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
+
+	dev->bus = bus;
+	dev->sysdata = node;
+	dev->dev.parent = bus->bridge;
+	dev->dev.bus = &pci_bus_type;
+	dev->devfn = devfn;
+	dev->multifunction = 0;		/* maybe a lie? */
+
+	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
+	dev->device = get_int_prop(node, "device-id", 0xffff);
+	dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
+	dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
+
+	dev->cfg_size = pci_cfg_space_size(dev);
+
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+	dev->class = get_int_prop(node, "class-code", 0);
+	dev->revision = get_int_prop(node, "revision-id", 0);
+
+	pr_debug("    class: 0x%x\n", dev->class);
+	pr_debug("    revision: 0x%x\n", dev->revision);
+
+	dev->current_state = 4;		/* unknown power state */
+	dev->error_state = pci_channel_io_normal;
+	dev->dma_mask = 0xffffffff;
+
+	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+		/* a PCI-PCI bridge */
+		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
+		dev->rom_base_reg = PCI_ROM_ADDRESS1;
+	} else if (!strcmp(type, "cardbus")) {
+		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
+	} else {
+		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+		dev->rom_base_reg = PCI_ROM_ADDRESS;
+		/* Maybe do a default OF mapping here */
+		dev->irq = NO_IRQ;
+	}
+
+	of_pci_parse_addrs(node, dev);
+
+	pr_debug("    adding to system ...\n");
+
+	pci_device_add(dev, bus);
+
+	return dev;
+}
+EXPORT_SYMBOL(of_create_pci_dev);
+
+/**
+ * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes
+ * @node: device tree node of bridge
+ * @dev: pci_dev structure for the bridge
+ *
+ * of_scan_bus() calls this routine for each PCI bridge that it finds, and
+ * this routine in turn call of_scan_bus() recusively to scan for more child
+ * devices.
+ */
+void __devinit of_scan_pci_bridge(struct device_node *node,
+				  struct pci_dev *dev)
+{
+	struct pci_bus *bus;
+	const u32 *busrange, *ranges;
+	int len, i, mode;
+	struct resource *res;
+	unsigned int flags;
+	u64 size;
+
+	pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
+
+	/* parse bus-range property */
+	busrange = of_get_property(node, "bus-range", &len);
+	if (busrange == NULL || len != 8) {
+		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+		       node->full_name);
+		return;
+	}
+	ranges = of_get_property(node, "ranges", &len);
+	if (ranges == NULL) {
+		printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
+		       node->full_name);
+		return;
+	}
+
+	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+	if (!bus) {
+		printk(KERN_ERR "Failed to create pci bus for %s\n",
+		       node->full_name);
+		return;
+	}
+
+	bus->primary = dev->bus->number;
+	bus->subordinate = busrange[1];
+	bus->bridge_ctl = 0;
+	bus->sysdata = node;
+
+	/* parse ranges property */
+	/* PCI #address-cells == 3 and #size-cells == 2 always */
+	res = &dev->resource[PCI_BRIDGE_RESOURCES];
+	for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
+		res->flags = 0;
+		bus->resource[i] = res;
+		++res;
+	}
+	i = 1;
+	for (; len >= 32; len -= 32, ranges += 8) {
+		flags = pci_parse_of_flags(ranges[0], 1);
+		size = of_read_number(&ranges[6], 2);
+		if (flags == 0 || size == 0)
+			continue;
+		if (flags & IORESOURCE_IO) {
+			res = bus->resource[0];
+			if (res->flags) {
+				printk(KERN_ERR "PCI: ignoring extra I/O range"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+		} else {
+			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
+				printk(KERN_ERR "PCI: too many memory ranges"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+			res = bus->resource[i];
+			++i;
+		}
+		res->start = of_read_number(&ranges[1], 2);
+		res->end = res->start + size - 1;
+		res->flags = flags;
+	}
+	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
+		bus->number);
+	pr_debug("    bus name: %s\n", bus->name);
+
+	mode = PCI_PROBE_NORMAL;
+	if (ppc_md.pci_probe_mode)
+		mode = ppc_md.pci_probe_mode(bus);
+	pr_debug("    probe mode: %d\n", mode);
+
+	if (mode == PCI_PROBE_DEVTREE)
+		of_scan_bus(node, bus);
+	else if (mode == PCI_PROBE_NORMAL)
+		pci_scan_child_bus(bus);
+}
+EXPORT_SYMBOL(of_scan_pci_bridge);
+
+/**
+ * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ * @rescan_existing: Flag indicating bus has already been set up
+ */
+static void __devinit __of_scan_bus(struct device_node *node,
+				    struct pci_bus *bus, int rescan_existing)
+{
+	struct device_node *child;
+	const u32 *reg;
+	int reglen, devfn;
+	struct pci_dev *dev;
+
+	pr_debug("of_scan_bus(%s) bus no %d... \n",
+		 node->full_name, bus->number);
+
+	/* Scan direct children */
+	for_each_child_of_node(node, child) {
+		pr_debug("  * %s\n", child->full_name);
+		reg = of_get_property(child, "reg", &reglen);
+		if (reg == NULL || reglen < 20)
+			continue;
+		devfn = (reg[0] >> 8) & 0xff;
+
+		/* create a new pci_dev for this device */
+		dev = of_create_pci_dev(child, bus, devfn);
+		if (!dev)
+			continue;
+		pr_debug("    dev header type: %x\n", dev->hdr_type);
+	}
+
+	/* Apply all fixups necessary. We don't fixup the bus "self"
+	 * for an existing bridge that is being rescanned
+	 */
+	if (!rescan_existing)
+		pcibios_setup_bus_self(bus);
+	pcibios_setup_bus_devices(bus);
+
+	/* Now scan child busses */
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
+			struct device_node *child = pci_device_to_OF_node(dev);
+			if (dev)
+				of_scan_pci_bridge(child, dev);
+		}
+	}
+}
+
+/**
+ * of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ */
+void __devinit of_scan_bus(struct device_node *node,
+			   struct pci_bus *bus)
+{
+	__of_scan_bus(node, bus, 0);
+}
+EXPORT_SYMBOL_GPL(of_scan_bus);
+
+/**
+ * of_rescan_bus - given a PCI bus node, scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ *
+ * Same as of_scan_bus, but for a pci_bus structure that has already been
+ * setup.
+ */
+void __devinit of_rescan_bus(struct device_node *node,
+			     struct pci_bus *bus)
+{
+	__of_scan_bus(node, bus, 1);
+}
+EXPORT_SYMBOL_GPL(of_rescan_bus);
+
-- 
cgit v1.2.3


From 89c2dd62a389c5fed07c4b13c906c43214fc7491 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 25 Aug 2009 16:20:45 +0000
Subject: powerpc/pci: Pull ppc32 PCI features into common

Some of the PCI features we have in ppc32 we will need on ppc64
platforms in the future.  These include support for:

* ppc_md.pci_exclude_device
* indirect config cycles
* early config cycles

We also simplified the logic in fake_pci_bus() to assume it will always
get a valid pci_controller.  Since all current callers seem to pass it
one.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/machdep.h    |  6 +--
 arch/powerpc/include/asm/pci-bridge.h | 35 ++++++++---------
 arch/powerpc/kernel/pci-common.c      | 71 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/pci_32.c          | 71 -----------------------------------
 4 files changed, 90 insertions(+), 93 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 11d1fc3a896..9efa2be7833 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -209,14 +209,14 @@ struct machdep_calls {
 	/*
 	 * optional PCI "hooks"
 	 */
-	/* Called in indirect_* to avoid touching devices */
-	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
 	/* Called at then very end of pcibios_init() */
 	void (*pcibios_after_init)(void);
 
 #endif /* CONFIG_PPC32 */
 
+	/* Called in indirect_* to avoid touching devices */
+	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
 	/* Called after PPC generic resource fixup to perform
 	   machine specific fixups */
 	void (*pcibios_fixup_resources)(struct pci_dev *);
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 3faf575f6b0..76e1f313a58 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -77,9 +77,7 @@ struct pci_controller {
 
 	int first_busno;
 	int last_busno;
-#ifndef CONFIG_PPC64
 	int self_busno;
-#endif
 
 	void __iomem *io_base_virt;
 #ifdef CONFIG_PPC64
@@ -104,7 +102,6 @@ struct pci_controller {
 	unsigned int __iomem *cfg_addr;
 	void __iomem *cfg_data;
 
-#ifndef CONFIG_PPC64
 	/*
 	 * Used for variants of PCI indirect handling and possible quirks:
 	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
@@ -128,7 +125,6 @@ struct pci_controller {
 #define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
 #define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
 	u32 indirect_type;
-#endif	/* !CONFIG_PPC64 */
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
 	 * ranges since the common pci_bus structure can't handle more
 	 */
@@ -146,21 +142,6 @@ struct pci_controller {
 #endif	/* CONFIG_PPC64 */
 };
 
-#ifndef CONFIG_PPC64
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-	/* No specific ISA handling on ppc32 at this stage, it
-	 * all goes through PCI
-	 */
-	return 0;
-}
-
 /* These are used for config access before all the PCI probing
    has been done. */
 extern int early_read_config_byte(struct pci_controller *hose, int bus,
@@ -182,6 +163,22 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
 extern void setup_indirect_pci(struct pci_controller* hose,
 			       resource_size_t cfg_addr,
 			       resource_size_t cfg_data, u32 flags);
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
 #else	/* CONFIG_PPC64 */
 
 /*
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 725ea9144e3..8f84a9a8428 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1617,3 +1617,74 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 
 }
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;    				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+	.read = null_read_config,
+	.write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (hose == 0) {
+		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+	}
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose? hose->ops: &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+			  int cap)
+{
+	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 1e807fe7ad2..8cf15d961c3 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -469,75 +469,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
 	return result;
 }
 
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)					\
-static int								\
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
-{									\
-	return PCIBIOS_DEVICE_NOT_FOUND;    				\
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
-	.read = null_read_config,
-	.write = null_write_config,
-};
 
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-	static struct pci_bus bus;
-
-	if (hose == 0) {
-		hose = pci_bus_to_hose(busnr);
-		if (hose == 0)
-			printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
-	}
-	bus.number = busnr;
-	bus.sysdata = hose;
-	bus.ops = hose? hose->ops: &null_pci_ops;
-	return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
-			       int devfn, int offset, type value)	\
-{									\
-	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
-					    devfn, offset, value);	\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
-			  int cap)
-{
-	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}
-- 
cgit v1.2.3


From e5a6a1c9094839581242c678b11c93c294108696 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Thu, 13 Aug 2009 09:37:04 +0000
Subject: powerpc: derive COMMAND_LINE_SIZE from asm-generic

The default COMMAND_LINE_SIZE in asm-generic is 512, so the
net effect of this change is nil, aside from the cleanup
factor.  See also commit 2b74b8569.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/setup.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index 817fac0a071..dae19342f0b 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -1,6 +1,6 @@
 #ifndef _ASM_POWERPC_SETUP_H
 #define _ASM_POWERPC_SETUP_H
 
-#define COMMAND_LINE_SIZE	512
+#include <asm-generic/setup.h>
 
 #endif	/* _ASM_POWERPC_SETUP_H */
-- 
cgit v1.2.3


From 77c0a700c1c292edafa11c1e52821ce4636f81b0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 28 Aug 2009 14:25:04 +1000
Subject: powerpc: Properly start decrementer on BookE secondary CPUs

This moves the code to start the decrementer on 40x and BookE into
a separate function which is now called from time_init() and
secondary_time_init(), before the respective clock sources are
registered. We also remove the 85xx specific code for doing it
from the platform code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/time.c        | 30 ++++++++++++++++++++++--------
 arch/powerpc/platforms/85xx/smp.c | 12 ------------
 2 files changed, 22 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index edb1edb3646..a180b4f9a4f 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -727,6 +727,18 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
 	return found;
 }
 
+/* should become __cpuinit when secondary_cpu_time_init also is */
+void start_cpu_decrementer(void)
+{
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	/* Clear any pending timer interrupts */
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+	/* Enable decrementer interrupt */
+	mtspr(SPRN_TCR, TCR_DIE);
+#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */
+}
+
 void __init generic_calibrate_decr(void)
 {
 	ppc_tb_freq = DEFAULT_TB_FREQ;		/* hardcoded default */
@@ -746,14 +758,6 @@ void __init generic_calibrate_decr(void)
 		printk(KERN_ERR "WARNING: Estimating processor frequency "
 				"(not found)\n");
 	}
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-#endif
 }
 
 int update_persistent_clock(struct timespec now)
@@ -914,6 +918,11 @@ static void __init init_decrementer_clockevent(void)
 
 void secondary_cpu_time_init(void)
 {
+	/* Start the decrementer on CPUs that have manual control
+	 * such as BookE
+	 */
+	start_cpu_decrementer();
+
 	/* FIME: Should make unrelatred change to move snapshot_timebase
 	 * call here ! */
 	register_decrementer_clockevent(smp_processor_id());
@@ -1017,6 +1026,11 @@ void __init time_init(void)
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
+	/* Start the decrementer on CPUs that have manual control
+	 * such as BookE
+	 */
+	start_cpu_decrementer();
+
 	/* Register the clocksource, if we're not running on iSeries */
 	if (!firmware_has_feature(FW_FEATURE_ISERIES))
 		clocksource_init();
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 9f526ba31c1..94f901da491 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -78,22 +78,10 @@ smp_85xx_kick_cpu(int nr)
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
 
-static void __init
-smp_85xx_basic_setup(int cpu_nr)
-{
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-}
-
 static void __init
 smp_85xx_setup_cpu(int cpu_nr)
 {
 	mpic_setup_this_cpu();
-
-	smp_85xx_basic_setup(cpu_nr);
 }
 
 struct smp_ops_t smp_85xx_ops = {
-- 
cgit v1.2.3


From 941132606c7611246d2034cb7b01f9270c2d1ede Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 28 Aug 2009 10:50:33 -0700
Subject: OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and
 OMAP2_IO_ADDRESS instead

Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS,
and convert omap_read/write into a functions instead of a macros.

Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE.

In the long run, most code should use ioremap + __raw_read/write instead.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/devices.c                 |  2 +-
 arch/arm/mach-omap1/pm.h                      |  4 +-
 arch/arm/mach-omap1/serial.c                  |  6 +-
 arch/arm/mach-omap1/sram.S                    | 12 ++--
 arch/arm/mach-omap1/time.c                    |  4 +-
 arch/arm/mach-omap2/board-4430sdp.c           |  4 +-
 arch/arm/mach-omap2/cm.h                      |  6 +-
 arch/arm/mach-omap2/omap-smp.c                |  2 +-
 arch/arm/mach-omap2/pm-debug.c                |  2 +-
 arch/arm/mach-omap2/prm.h                     |  6 +-
 arch/arm/mach-omap2/sdrc.h                    |  6 +-
 arch/arm/mach-omap2/serial.c                  |  6 +-
 arch/arm/mach-omap2/sram242x.S                |  4 +-
 arch/arm/mach-omap2/sram243x.S                |  4 +-
 arch/arm/mach-omap2/timer-gp.c                |  2 +-
 arch/arm/plat-omap/dma.c                      |  8 +--
 arch/arm/plat-omap/dmtimer.c                  |  5 +-
 arch/arm/plat-omap/gpio.c                     | 86 +++++++++++++--------------
 arch/arm/plat-omap/include/mach/control.h     | 12 ++--
 arch/arm/plat-omap/include/mach/entry-macro.S |  8 +--
 arch/arm/plat-omap/include/mach/io.h          | 64 +++++++-------------
 arch/arm/plat-omap/include/mach/mtd-xip.h     |  2 +-
 arch/arm/plat-omap/include/mach/omap44xx.h    |  8 +--
 arch/arm/plat-omap/include/mach/sdrc.h        |  6 +-
 arch/arm/plat-omap/io.c                       | 58 ++++++++++++++++++
 arch/arm/plat-omap/sram.c                     | 20 +++----
 26 files changed, 193 insertions(+), 154 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index bbbaeb0abcd..06808434ea0 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -71,7 +71,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
 
 static struct resource mbox_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index 9ed5e2c1de4..c4f05bdcf8a 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE		IO_ADDRESS(0xfffece00)
+#define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET		0x04
 #define ARM_IDLECT2_ASM_OFFSET		0x08
 
-#define TCMIF_ASM_BASE			IO_ADDRESS(0xfffecc00)
+#define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET		0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index f754cee4f3c..6f54b2c591c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -82,7 +82,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 261cdc48228..7724e520d07 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -21,13 +21,13 @@
 ENTRY(omap1_sram_reprogram_clock)
 	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
 
-	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
-	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+	mov	r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
 
-	mov	r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
-	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+	mov	r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
 
 	tst	r0, #1 << 4			@ want lock mode?
 	beq	newck				@ nope
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d56408d3cf..1be6a214d88 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -62,8 +62,8 @@ typedef struct {
 	u32 read_tim;			/* READ_TIM,   R */
 } omap_mpu_timer_regs_t;
 
-#define omap_mpu_timer_base(n)						\
-((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+#define omap_mpu_timer_base(n)							\
+((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long omap_mpu_timer_read(int nr)
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index b0c7402248f..bdfda36d8aa 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -53,8 +53,8 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 }
 
 static void __init omap_4430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index f3c91a1ca39..18d9a121aa7 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global CM registers
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 8fe8d230f21..48ee295db27 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * for us: do so
 	 */
 
-	gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
 
 	/*
 	 * Synchronise with the boot thread.
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 6cc375a275b..da3a53f8ccc 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -48,7 +48,7 @@ int omap2_pm_debug;
 	regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
 	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
 
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 9937e281469..03c467c35f5 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
-			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+			OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global PRM registers
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1a8bbd09406..0837eda5f2b 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -48,9 +48,9 @@ static inline u32 sms_read_reg(u16 reg)
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index a7421a50410..42449002f60 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -73,7 +73,7 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -87,7 +87,7 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -101,7 +101,7 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index bb299851116..9b62208658b 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index 9955abcaeb3..df2cd9277c0 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 97eeeebcb06..e2338c0aebc 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -231,7 +231,7 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+	twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
 #endif
 	omap_dm_timer_init();
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index e3ac94f0900..bf086346210 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2337,16 +2337,16 @@ static int __init omap_init_dma(void)
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
+		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 7f50b6103de..d325b54daeb 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -774,7 +774,10 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		timer->io_base = IO_ADDRESS(timer->phys_base);
+		if (cpu_class_is_omap1())
+			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
+		else
+			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9298bc0ab17..fd63dd3bf4c 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE		OMAP1_IO_ADDRESS(0xfffce000)
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE		IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE		IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE		IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbe400)
+#define OMAP1610_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbec00)
+#define OMAP1610_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbb400)
+#define OMAP1610_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbbc00)
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -70,12 +70,12 @@
 /*
  * OMAP730 specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP730_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP730_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP730_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP730_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP730_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP730_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP730_GPIO_DATA_INPUT		0x00
 #define OMAP730_GPIO_DATA_OUTPUT	0x04
 #define OMAP730_GPIO_DIR_CONTROL	0x08
@@ -86,12 +86,12 @@
 /*
  * OMAP850 specific GPIO registers
  */
-#define OMAP850_GPIO1_BASE		IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE		IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE		IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE		IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE		IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE		IO_ADDRESS(0xfffbe800)
+#define OMAP850_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
+#define OMAP850_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
+#define OMAP850_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
+#define OMAP850_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
+#define OMAP850_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
+#define OMAP850_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
 #define OMAP850_GPIO_DATA_INPUT		0x00
 #define OMAP850_GPIO_DATA_OUTPUT	0x04
 #define OMAP850_GPIO_DIR_CONTROL	0x08
@@ -99,19 +99,21 @@
 #define OMAP850_GPIO_INT_MASK		0x10
 #define OMAP850_GPIO_INT_STATUS		0x14
 
+#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE)
+
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE		IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE		IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE		IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48018000)
+#define OMAP242X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4801a000)
+#define OMAP242X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x4801c000)
+#define OMAP242X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x4801e000)
 
-#define OMAP243X_GPIO1_BASE		IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE		IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE		IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE		IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE		IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x4900C000)
+#define OMAP243X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4900E000)
+#define OMAP243X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49010000)
+#define OMAP243X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49012000)
+#define OMAP243X_GPIO5_BASE		OMAP2_IO_ADDRESS(0x480B6000)
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -142,24 +144,22 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE		IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE		IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE		IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE		IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE		IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48310000)
+#define OMAP34XX_GPIO2_BASE		OMAP2_IO_ADDRESS(0x49050000)
+#define OMAP34XX_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49052000)
+#define OMAP34XX_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49054000)
+#define OMAP34XX_GPIO5_BASE		OMAP2_IO_ADDRESS(0x49056000)
+#define OMAP34XX_GPIO6_BASE		OMAP2_IO_ADDRESS(0x49058000)
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             IO_ADDRESS(0x4805D000)
-
-#define OMAP_MPUIO_VBASE		IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
 
 struct gpio_bank {
 	void __iomem *base;
@@ -195,7 +195,7 @@ struct gpio_bank {
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
+	{ OMAP1_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
 	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
 	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
@@ -205,14 +205,14 @@ static struct gpio_bank gpio_bank_1610[5] = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
 	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP730
 static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
 	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index 8140dbccb7b..826d317cdbe 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -20,15 +20,15 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
index 56426ed45ef..a5592991634 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -41,7 +41,7 @@
 		.endm
 
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
 		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
 		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
 		mov	\irqstat, #0xffffffff
@@ -53,7 +53,7 @@
 		cmp	\irqnr, #0
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		addeqs	\irqnr, \irqnr, #32
 1510:
@@ -68,9 +68,9 @@
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
 #include <mach/omap44xx.h>
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 21fb0efdda8..55659809478 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -54,15 +54,23 @@
  * ----------------------------------------------------------------------------
  */
 
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#define OMAP2_IO_OFFSET		0x90000000
+#define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+
 #if defined(CONFIG_ARCH_OMAP1)
 
 #define IO_PHYS			0xFFFB0000
-#define IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
 #define IO_SIZE			0x40000
-#define IO_VIRT			(IO_PHYS - IO_OFFSET)
-#define __IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define __OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
-#define io_v2p(va)		((va) + IO_OFFSET)
+#define IO_VIRT			(IO_PHYS - OMAP1_IO_OFFSET)
 
 #elif defined(CONFIG_ARCH_OMAP2)
 
@@ -87,11 +95,6 @@
 #define OMAP243X_SMS_VIRT	0xFC000000
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)	/* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_24XX_VIRT	0xe0000000
@@ -143,12 +146,6 @@
 #define OMAP343X_SDRC_VIRT	0xFD000000
 #define OMAP343X_SDRC_SIZE	SZ_1M
 
-
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
 /* DSP */
 #define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_34XX_VIRT	0xe0000000
@@ -188,39 +185,20 @@
 #define OMAP44XX_GPMC_VIRT	0xe0000000
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
-
-#define IO_OFFSET		0x90000000
-#define __IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define __OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
-
 #endif
 
-#define IO_ADDRESS(pa)		IOMEM(__IO_ADDRESS(pa))
-#define OMAP1_IO_ADDRESS(pa)	IOMEM(__OMAP1_IO_ADDRESS(pa))
-#define OMAP2_IO_ADDRESS(pa)	IOMEM(__OMAP2_IO_ADDRESS(pa))
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)		(x)
-#else
-#define IOMEM(x)		((void __force __iomem *)(x))
+#ifndef __ASSEMBLER__
 
 /*
- * Functions to access the OMAP IO region
- *
- * NOTE: - Use omap_read/write[bwl] for physical register addresses
- *	 - Use __raw_read/write[bwl]() for virtual register addresses
- *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- *	 - DO NOT use hardcoded virtual addresses to allow changing the
- *	   IO address space again if needed
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
  */
-#define omap_readb(a)		__raw_readb(IO_ADDRESS(a))
-#define omap_readw(a)		__raw_readw(IO_ADDRESS(a))
-#define omap_readl(a)		__raw_readl(IO_ADDRESS(a))
 
-#define omap_writeb(v,a)	__raw_writeb(v, IO_ADDRESS(a))
-#define omap_writew(v,a)	__raw_writew(v, IO_ADDRESS(a))
-#define omap_writel(v,a)	__raw_writel(v, IO_ADDRESS(a))
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
 
 struct omap_sdrc_params;
 
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
index 39b591ff54b..f82a8dcaad9 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -25,7 +25,7 @@ typedef struct {
 } xip_omap_mpu_timer_regs_t;
 
 #define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 	(n)*OMAP_MPU_TIMER_OFFSET))
 
 static inline unsigned long xip_omap_mpu_timer_read(int nr)
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
index 15dec7f1c7c..b3ba5ac7b4a 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/mach/omap44xx.h
@@ -33,14 +33,14 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
 #define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 0be18e4ff18..93f70d2cbce 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -71,11 +71,11 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 9b42d72d96c..d491ad15f19 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -132,3 +132,61 @@ void omap_iounmap(volatile void __iomem *addr)
 		__iounmap(addr);
 }
 EXPORT_SYMBOL(omap_iounmap);
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readb(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readb(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readw(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readw(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+	if (cpu_class_is_omap1())
+		return __raw_readl(OMAP1_IO_ADDRESS(pa));
+	else
+		return __raw_readl(OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writew(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+	if (cpu_class_is_omap1())
+		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
+	else
+		__raw_writel(v, OMAP2_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 5eae7876979..925f64711c3 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -56,16 +56,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0	IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	IO_ADDRESS(0x480022F0)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
-- 
cgit v1.2.3


From 6175556fdc0a66ce5f1831e22892fac6f28fc2ec Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 28 Aug 2009 10:50:34 -0700
Subject: OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE

Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c              | 4 ++--
 arch/arm/plat-omap/include/mach/gpio.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index fd63dd3bf4c..b55b4adffbe 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -99,7 +99,7 @@
 #define OMAP850_GPIO_INT_MASK		0x10
 #define OMAP850_GPIO_INT_STATUS		0x14
 
-#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP_MPUIO_BASE)
+#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
 
 /*
  * omap24xx specific GPIO registers
@@ -224,7 +224,7 @@ static struct gpio_bank gpio_bank_730[7] = {
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 2b22a8799bc..633ff688b92 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -29,7 +29,7 @@
 #include <linux/io.h>
 #include <mach/irqs.h>
 
-#define OMAP_MPUIO_BASE			0xfffb5000
+#define OMAP1_MPUIO_BASE			0xfffb5000
 
 #if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
 
-- 
cgit v1.2.3


From db326be1bca2ddbcac80161953956c8b8bc5b00b Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 28 Aug 2009 10:50:37 -0700
Subject: OMAP: Remove ifdefs for io.h

Remove ifdefs for io.h

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/io.c             |  6 +++---
 arch/arm/plat-omap/include/mach/io.h | 37 ++++++++++++++++++++++++++++--------
 arch/arm/plat-omap/io.c              |  4 ++--
 3 files changed, 34 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 3afe540149f..7030f9281ea 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -29,9 +29,9 @@ extern void omapfb_reserve_sdram(void);
  */
 static struct map_desc omap_io_desc[] __initdata = {
 	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
 	}
 };
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index 55659809478..8d32df32b0b 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -66,13 +66,21 @@
 #define OMAP2_IO_OFFSET		0x90000000
 #define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
 
-#if defined(CONFIG_ARCH_OMAP1)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#define IO_PHYS			0xFFFB0000
-#define IO_SIZE			0x40000
-#define IO_VIRT			(IO_PHYS - OMAP1_IO_OFFSET)
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
 
-#elif defined(CONFIG_ARCH_OMAP2)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP2 */
 #define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
@@ -106,7 +114,11 @@
 #define DSP_MMU_24XX_VIRT	0xe2000000
 #define DSP_MMU_24XX_SIZE	SZ_4K
 
-#elif defined(CONFIG_ARCH_OMAP3)
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
 /* We map both L3 and L4 on OMAP3 */
 #define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
@@ -157,8 +169,12 @@
 #define DSP_MMU_34XX_VIRT	0xe2000000
 #define DSP_MMU_34XX_SIZE	SZ_4K
 
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
 
-#elif defined(CONFIG_ARCH_OMAP4)
 /* We map both L3 and L4 on OMAP4 */
 #define L3_44XX_PHYS		L3_44XX_BASE
 #define L3_44XX_VIRT		0xd4000000
@@ -185,7 +201,12 @@
 #define OMAP44XX_GPMC_VIRT	0xe0000000
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
-#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap specific register access
+ * ----------------------------------------------------------------------------
+ */
 
 #ifndef __ASSEMBLER__
 
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index d491ad15f19..b6defa23e77 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -30,8 +30,8 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 {
 #ifdef CONFIG_ARCH_OMAP1
 	if (cpu_class_is_omap1()) {
-		if (BETWEEN(p, IO_PHYS, IO_SIZE))
-			return XLATE(p, IO_PHYS, IO_VIRT);
+		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
+			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
 	if (cpu_is_omap730()) {
 		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
-- 
cgit v1.2.3


From 987cadcf3ccf9e5bde7a31d9be392f9de5f88833 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:29 -0700
Subject: OMAP: remove OMAP_TAG_SERIAL_CONSOLE

Omap tags are deprecated and remove OMAP_TAG_SERIAL_CONSOLE. Console must be
enabled with the console boot parameter instead.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/common.c             | 44 ---------------------------------
 arch/arm/plat-omap/include/mach/board.h |  1 -
 2 files changed, 45 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ebcf006406f..f37a29acc36 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -127,50 +127,6 @@ const void *omap_get_var_config(u16 tag, size_t *len)
 }
 EXPORT_SYMBOL(omap_get_var_config);
 
-static int __init omap_add_serial_console(void)
-{
-	const struct omap_serial_console_config *con_info;
-	const struct omap_uart_config *uart_info;
-	static char speed[11], *opt = NULL;
-	int line, i, uart_idx;
-
-	uart_info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	con_info = omap_get_config(OMAP_TAG_SERIAL_CONSOLE,
-					struct omap_serial_console_config);
-	if (uart_info == NULL || con_info == NULL)
-		return 0;
-
-	if (con_info->console_uart == 0)
-		return 0;
-
-	if (con_info->console_speed) {
-		snprintf(speed, sizeof(speed), "%u", con_info->console_speed);
-		opt = speed;
-	}
-
-	uart_idx = con_info->console_uart - 1;
-	if (uart_idx >= OMAP_MAX_NR_PORTS) {
-		printk(KERN_INFO "Console: external UART#%d. "
-			"Not adding it as console this time.\n",
-			uart_idx + 1);
-		return 0;
-	}
-	if (!(uart_info->enabled_uarts & (1 << uart_idx))) {
-		printk(KERN_ERR "Console: Selected UART#%d is "
-			"not enabled for this platform\n",
-			uart_idx + 1);
-		return -1;
-	}
-	line = 0;
-	for (i = 0; i < uart_idx; i++) {
-		if (uart_info->enabled_uarts & (1 << i))
-			line++;
-	}
-	return add_preferred_console("ttyS", line, opt);
-}
-console_initcall(omap_add_serial_console);
-
-
 /*
  * 32KHz clocksource ... always available, on pretty most chips except
  * OMAP 730 and 1510.  Other timers could be used as clocksources, with
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 50ea79a0efa..0d125868b62 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -16,7 +16,6 @@
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
 #define OMAP_TAG_UART		0x4f07
-- 
cgit v1.2.3


From 15ac408ee5a509053a765b816e9179515329369f Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:31 -0700
Subject: OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on
 idle

OMAP tags are deprecrated so drop them.

Drop UART config data which decides which UARTs to enable during boot.
This is no longer necessary since serial core code disables clocks
after inactivity.

Background: with new UART idle code, all on-chip UARTs are idled using
a configurable inactivity timer (default 5 seconds.)  After the
inactivity timer, UART clocks are disabled automatically.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c    |  5 -----
 arch/arm/mach-omap1/board-fsample.c      |  5 -----
 arch/arm/mach-omap1/board-generic.c      |  5 -----
 arch/arm/mach-omap1/board-h2.c           |  5 -----
 arch/arm/mach-omap1/board-h3.c           |  5 -----
 arch/arm/mach-omap1/board-innovator.c    |  5 -----
 arch/arm/mach-omap1/board-osk.c          |  5 -----
 arch/arm/mach-omap1/board-palmte.c       |  5 -----
 arch/arm/mach-omap1/board-palmtt.c       |  5 -----
 arch/arm/mach-omap1/board-palmz71.c      |  5 -----
 arch/arm/mach-omap1/board-perseus2.c     |  5 -----
 arch/arm/mach-omap1/board-sx1.c          |  5 -----
 arch/arm/mach-omap1/board-voiceblue.c    |  5 -----
 arch/arm/mach-omap1/serial.c             | 11 -----------
 arch/arm/mach-omap2/board-2430sdp.c      |  5 -----
 arch/arm/mach-omap2/board-3430sdp.c      |  5 -----
 arch/arm/mach-omap2/board-4430sdp.c      |  1 -
 arch/arm/mach-omap2/board-apollon.c      |  5 -----
 arch/arm/mach-omap2/board-generic.c      |  5 -----
 arch/arm/mach-omap2/board-h4.c           |  5 -----
 arch/arm/mach-omap2/board-ldp.c          |  5 -----
 arch/arm/mach-omap2/board-omap3beagle.c  |  5 -----
 arch/arm/mach-omap2/board-omap3evm.c     |  5 -----
 arch/arm/mach-omap2/board-omap3pandora.c |  5 -----
 arch/arm/mach-omap2/board-overo.c        |  4 ----
 arch/arm/mach-omap2/board-rx51.c         |  5 -----
 arch/arm/mach-omap2/board-zoom2.c        |  5 -----
 arch/arm/mach-omap2/serial.c             | 12 ------------
 arch/arm/plat-omap/include/mach/board.h  |  1 -
 29 files changed, 149 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8b40aace9db..580773202ea 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -162,10 +162,6 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config ams_delta_uart_config __initdata = {
-	.enabled_uarts = 1,
-};
-
 static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.register_host	= 1,
 	.hmc_mode	= 16,
@@ -174,7 +170,6 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
-	{ OMAP_TAG_UART,	&ams_delta_uart_config },
 };
 
 static struct resource ams_delta_kp_resources[] = {
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 19e0e923233..a7ead1b9322 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -240,16 +240,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config fsample_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config fsample_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel fsample_config[] = {
-	{ OMAP_TAG_UART,	&fsample_uart_config },
 	{ OMAP_TAG_LCD,		&fsample_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e724940e86f..fb47239da72 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -57,12 +57,7 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
 };
 #endif
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel generic_config[] __initdata = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index f695aa053ac..aab860307dc 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -360,16 +360,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h2_uart_config },
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f597968733b..89586b80b8d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -313,16 +313,11 @@ static struct omap_usb_config h3_usb_config __initdata = {
 	.pins[1]	= 3,
 };
 
-static struct omap_uart_config h3_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h3_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel h3_config[] __initdata = {
-	{ OMAP_TAG_UART,	&h3_uart_config },
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2fd98260ea4..cc2abbb2d0f 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -368,13 +368,8 @@ static inline void innovator_mmc_init(void)
 }
 #endif
 
-static struct omap_uart_config innovator_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel innovator_config[] = {
 	{ OMAP_TAG_LCD,		NULL },
-	{ OMAP_TAG_UART,	&innovator_uart_config },
 };
 
 static void __init innovator_init(void)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index cf3247b15f8..ed891b8a6b1 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -293,10 +293,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_uart_config osk_uart_config __initdata = {
-	.enabled_uarts = (1 << 0),
-};
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 static struct omap_lcd_config osk_lcd_config __initdata = {
 	.ctrl_name	= "internal",
@@ -304,7 +300,6 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
 #endif
 
 static struct omap_board_config_kernel osk_config[] __initdata = {
-	{ OMAP_TAG_UART,		&osk_uart_config },
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
 #endif
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 886b4c0569b..90dd0431b0d 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -212,10 +212,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmte_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
@@ -302,7 +298,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
 
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
-	{ OMAP_TAG_UART,	&palmte_uart_config },
 };
 
 static struct spi_board_info palmte_spi_info[] __initdata = {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 4f1b44831d3..8256139891f 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -274,13 +274,8 @@ static struct omap_lcd_config palmtt_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_uart_config palmtt_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmtt_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmtt_lcd_config	},
-	{ OMAP_TAG_UART,	&palmtt_uart_config	},
 };
 
 static void __init omap_mpu_wdt_mode(int mode) {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9a55c3c5821..81b6bde1c5a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -244,13 +244,8 @@ static struct omap_lcd_config palmz71_lcd_config __initdata = {
 	.ctrl_name = "internal",
 };
 
-static struct omap_uart_config palmz71_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
-};
-
 static struct omap_board_config_kernel palmz71_config[] __initdata = {
 	{OMAP_TAG_LCD,	&palmz71_lcd_config},
-	{OMAP_TAG_UART,	&palmz71_uart_config},
 };
 
 static irqreturn_t
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 3b9f907aa89..83406699f31 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -208,16 +208,11 @@ static int nand_dev_ready(struct omap_nand_platform_data *data)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static struct omap_uart_config perseus2_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
 static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel perseus2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&perseus2_uart_config },
 	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index c096577695f..02c85ca2e1d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -369,13 +369,8 @@ static struct platform_device *sx1_devices[] __initdata = {
 };
 /*-----------------------------------------*/
 
-static struct omap_uart_config sx1_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel sx1_config[] __initdata = {
 	{ OMAP_TAG_LCD,	&sx1_lcd_config },
-	{ OMAP_TAG_UART,	&sx1_uart_config },
 };
 
 /*-----------------------------------------*/
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 98275e03dad..c06e7a55347 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -140,12 +140,7 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
 	.pins[2]	= 6,
 };
 
-static struct omap_uart_config voiceblue_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel voiceblue_config[] = {
-	{ OMAP_TAG_UART, &voiceblue_uart_config },
 };
 
 static void __init voiceblue_init_irq(void)
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6f54b2c591c..d496e50fec4 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -109,7 +109,6 @@ static struct platform_device serial_device = {
 void __init omap_serial_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 
 	if (cpu_is_omap730()) {
 		serial_platform_data[0].regshift = 0;
@@ -131,19 +130,9 @@ void __init omap_serial_init(void)
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		unsigned char reg;
 
-		if (!((1 << i) & info->enabled_uarts)) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 8ec2a132904..7f5a74d5924 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -146,12 +146,7 @@ static void __init omap_2430sdp_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct omap_uart_config sdp2430_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel sdp2430_config[] = {
-	{OMAP_TAG_UART, &sdp2430_uart_config},
 	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ac262cd7450..7e9b76cc767 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -174,16 +174,11 @@ static void __init omap_3430sdp_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct omap_uart_config sdp3430_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp3430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index bdfda36d8aa..f22f429c88f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -47,7 +47,6 @@ static struct omap_lcd_config sdp4430_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel sdp4430_config[] __initdata = {
-	{ OMAP_TAG_UART,	&sdp4430_uart_config },
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index dcfc20d0389..615f21d1eb2 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -256,10 +256,6 @@ static void __init omap_apollon_init_irq(void)
 	apollon_init_smc91x();
 }
 
-static struct omap_uart_config apollon_uart_config __initdata = {
-	.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
-};
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -272,7 +268,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel apollon_config[] = {
-	{ OMAP_TAG_UART,	&apollon_uart_config },
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fd00aa03690..3e401c5b6e4 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -37,12 +37,7 @@ static void __init omap_generic_init_irq(void)
 	omap_init_irq();
 }
 
-static struct omap_uart_config generic_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel generic_config[] = {
-	{ OMAP_TAG_UART,	&generic_uart_config },
 };
 
 static void __init omap_generic_init(void)
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 7b1d61d5bb2..b6501d241c1 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -276,10 +276,6 @@ static void __init omap_h4_init_irq(void)
 	h4_init_flash();
 }
 
-static struct omap_uart_config h4_uart_config __initdata = {
-	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -318,7 +314,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
 };
 
 static struct omap_board_config_kernel h4_config[] = {
-	{ OMAP_TAG_UART,	&h4_uart_config },
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ea383f88cb1..2dd6806a1e8 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -276,10 +276,6 @@ static void __init omap_ldp_init_irq(void)
 	ldp_init_smsc911x();
 }
 
-static struct omap_uart_config ldp_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct platform_device ldp_lcd_device = {
 	.name		= "ldp_lcd",
 	.id		= -1,
@@ -290,7 +286,6 @@ static struct omap_lcd_config ldp_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel ldp_config[] __initdata = {
-	{ OMAP_TAG_UART,	&ldp_uart_config },
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index e00ba128cec..201360781ac 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -108,10 +108,6 @@ static struct platform_device omap3beagle_nand_device = {
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-static struct omap_uart_config omap3_beagle_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -345,7 +341,6 @@ static struct platform_device keys_gpio = {
 };
 
 static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
 	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c4b144647dc..3e0435371ce 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -92,10 +92,6 @@ static inline void __init omap3evm_init_smc911x(void)
 	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
 }
 
-static struct omap_uart_config omap3_evm_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -287,7 +283,6 @@ static void __init omap3_evm_init_irq(void)
 }
 
 static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
 	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 864ee3d021f..8236708c362 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -213,10 +213,6 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct omap_uart_config omap3pandora_uart_config __initdata = {
-	.enabled_uarts	= (1 << 2), /* UART3 */
-};
-
 static struct regulator_consumer_supply pandora_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -376,7 +372,6 @@ static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
-	{ OMAP_TAG_UART,	&omap3pandora_uart_config },
 	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 6bce23004aa..eb78e6eab4f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -271,9 +271,6 @@ static void __init overo_flash_init(void)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
-static struct omap_uart_config overo_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
 
 static struct twl4030_hsmmc_info mmc[] = {
 	{
@@ -378,7 +375,6 @@ static struct omap_lcd_config overo_lcd_config __initdata = {
 };
 
 static struct omap_board_config_kernel overo_config[] __initdata = {
-	{ OMAP_TAG_UART,	&overo_uart_config },
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1c9e07fe826..c0d13401425 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -31,10 +31,6 @@
 #include <mach/gpmc.h>
 #include <mach/usb.h>
 
-static struct omap_uart_config rx51_uart_config = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
 };
@@ -52,7 +48,6 @@ static struct omap_fbmem_config rx51_fbmem2_config = {
 };
 
 static struct omap_board_config_kernel rx51_config[] = {
-	{ OMAP_TAG_UART,	&rx51_uart_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem0_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem1_config },
 	{ OMAP_TAG_FBMEM,	&rx51_fbmem2_config },
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 427b7b8b123..3a42eca1ad8 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -30,12 +30,7 @@ static void __init omap_zoom2_init_irq(void)
 	omap_gpio_init();
 }
 
-static struct omap_uart_config zoom2_uart_config __initdata = {
-	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
-};
-
 static struct omap_board_config_kernel zoom2_config[] __initdata = {
-	{ OMAP_TAG_UART,	&zoom2_uart_config },
 };
 
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 42449002f60..409b03309af 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -555,7 +555,6 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 void __init omap_serial_init(void)
 {
 	int i;
-	const struct omap_uart_config *info;
 	char name[16];
 
 	/*
@@ -564,23 +563,12 @@ void __init omap_serial_init(void)
 	 * if not needed.
 	 */
 
-	info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
-
-	if (info == NULL)
-		return;
-
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
-		if (!(info->enabled_uarts & (1 << i))) {
-			p->membase = NULL;
-			p->mapbase = 0;
-			continue;
-		}
-
 		sprintf(name, "uart%d_ick", i+1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 0d125868b62..8e913c32281 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -18,7 +18,6 @@
 #define OMAP_TAG_CLOCK		0x4f01
 #define OMAP_TAG_LCD		0x4f05
 #define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_UART		0x4f07
 #define OMAP_TAG_FBMEM		0x4f08
 #define OMAP_TAG_STI_CONSOLE	0x4f09
 #define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-- 
cgit v1.2.3


From 79e44c952cec025295b3f0fd0ff2a875689b98c4 Mon Sep 17 00:00:00 2001
From: Roger Quadros <ext-roger.quadros@nokia.com>
Date: Fri, 28 Aug 2009 10:51:35 -0700
Subject: OMAP: Remove omap boot parsing code

Remove left over code for parsing omap boot tags. This is
no longer used.
see commit fc0ef1bfa1353e048e055374a09c75320d22231b

Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/common.c | 44 --------------------------------------------
 1 file changed, 44 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f37a29acc36..a6fa786019c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -54,50 +54,6 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 	struct omap_board_config_kernel *kinfo = NULL;
 	int i;
 
-#ifdef CONFIG_OMAP_BOOT_TAG
-	struct omap_board_config_entry *info = NULL;
-
-	if (omap_bootloader_tag_len > 4)
-		info = (struct omap_board_config_entry *) omap_bootloader_tag;
-	while (info != NULL) {
-		u8 *next;
-
-		if (info->tag == tag) {
-			if (skip == 0)
-				break;
-			skip--;
-		}
-
-		if ((info->len & 0x03) != 0) {
-			/* We bail out to avoid an alignment fault */
-			printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
-			       info->len, info->tag);
-			return NULL;
-		}
-		next = (u8 *) info + sizeof(*info) + info->len;
-		if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
-			info = NULL;
-		else
-			info = (struct omap_board_config_entry *) next;
-	}
-	if (info != NULL) {
-		/* Check the length as a lame attempt to check for
-		 * binary inconsistency. */
-		if (len != NO_LENGTH_CHECK) {
-			/* Word-align len */
-			if (len & 0x03)
-				len = (len + 3) & ~0x03;
-			if (info->len != len) {
-				printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
-				       tag, len, info->len);
-				return NULL;
-			}
-		}
-		if (len_out != NULL)
-			*len_out = info->len;
-		return info->data;
-	}
-#endif
 	/* Try to find the config from the board-specific structures
 	 * in the kernel. */
 	for (i = 0; i < omap_board_config_size; i++) {
-- 
cgit v1.2.3


From 82dbb9d39f58e3d12b5903764901df5fec759daf Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Fri, 28 Aug 2009 10:51:36 -0700
Subject: OMAP: GPIO: Avoid generating extra IRQs

It is possible for GPIO IRQ lines configured with
falling edge triggering only to get IRQs at the
rising edge upon the exit of offmode. And vice
versa. Prevent such IRQs to arrive by generating
the IRQ obeying the detection scheme.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index b55b4adffbe..7c70a6afcf6 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1895,7 +1895,7 @@ void omap2_gpio_resume_after_retention(void)
 		return;
 	for (i = 0; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l;
+		u32 l, gen, gen0, gen1;
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
@@ -1916,14 +1916,33 @@ void omap2_gpio_resume_after_retention(void)
 #endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
-		if (l) {
+
+		/*
+		 * No need to generate IRQs for the rising edge for gpio IRQs
+		 * configured with falling edge only; and vice versa.
+		 */
+		gen0 = l & bank->saved_fallingdetect;
+		gen0 &= bank->saved_datain;
+
+		gen1 = l & bank->saved_risingdetect;
+		gen1 &= ~(bank->saved_datain);
+
+		/* FIXME: Consider GPIO IRQs with level detections properly! */
+		gen = l & (~(bank->saved_fallingdetect) &
+				~(bank->saved_risingdetect));
+		/* Consider all GPIO IRQs needed to be updated */
+		gen |= gen0 | gen1;
+
+		if (gen) {
 			u32 old0, old1;
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
 			defined(CONFIG_ARCH_OMAP4)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+			__raw_writel(old0 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT0);
+			__raw_writel(old1 | gen, bank->base +
+					OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 #endif
-- 
cgit v1.2.3


From eff443df679ea7e553830db992e2f02707ddbb47 Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Fri, 28 Aug 2009 10:51:37 -0700
Subject: OMAP1: AMS_DELTA: add modem support

This patch adds support for modem device found on Amstrad E3 (Delta) board.

Based on earlier patch by Jonathan McDowell, available at
http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch.
Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c.

This patch is dependent on 8250 driver changes getting accepted upstream:
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/board-ams-delta.c | 38 +++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 580773202ea..42920f9c1a1 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -15,8 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
+#include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/serial_8250.h>
 
+#include <asm/serial.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -230,6 +233,41 @@ static void __init ams_delta_init(void)
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 }
 
+static struct plat_serial8250_port ams_delta_modem_ports[] = {
+	{
+		.membase	= (void *) AMS_DELTA_MODEM_VIRT,
+		.mapbase	= AMS_DELTA_MODEM_PHYS,
+		.irq		= -EINVAL, /* changed later */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= BASE_BAUD * 16,
+	},
+	{ },
+};
+
+static struct platform_device ams_delta_modem_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data = ams_delta_modem_ports,
+	},
+};
+
+static int __init ams_delta_modem_init(void)
+{
+	omap_cfg_reg(M14_1510_GPIO2);
+	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+
+	ams_delta_latch2_write(
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
+		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
+
+	return platform_device_register(&ams_delta_modem_device);
+}
+arch_initcall(ams_delta_modem_init);
+
 static void __init ams_delta_map_io(void)
 {
 	omap1_map_common_io();
-- 
cgit v1.2.3


From 1b52d5df64bea12bed82dbc1c736638e77d1ce80 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:37 -0700
Subject: OMAP2: compile usb-tusb6010.c

For some reason usb-tusb6010.c was't compiled, add it to Makefile and
Kconfig. This is prepraration for upcoming n8x0 support.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig  | 5 +++++
 arch/arm/mach-omap2/Makefile | 1 +
 2 files changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a755eb5e236..bf54686c8b7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -31,6 +31,11 @@ config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
 
+config MACH_OMAP2_TUSB6010
+	bool
+	depends on ARCH_OMAP2 && ARCH_OMAP2420
+	default y if MACH_NOKIA_N8X0
+
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on ARCH_OMAP2 && ARCH_OMAP24XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 735bae5b0de..757c84b8eef 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
 # Platform specific device init code
 obj-y					+= usb-musb.o
+obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
-- 
cgit v1.2.3


From 6313881292c238190bc119404ae13f65c61b2daa Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:38 -0700
Subject: OMAP2: add board file for Nokia N800 and N810

Add board file for Nokia N800 and N810 devices. Currently only serial ports,
onenand and spi are configured, more to come later.

Tested on Nokia N800.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig      |   4 ++
 arch/arm/mach-omap2/Makefile     |   2 +-
 arch/arm/mach-omap2/board-n8x0.c | 150 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 155 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-omap2/board-n8x0.c

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index bf54686c8b7..75b1c7efae7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -73,6 +73,10 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N8X0
+	bool "Nokia N800/N810"
+	depends on ARCH_OMAP2420
+
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 757c84b8eef..8850a247bec 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -62,7 +62,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
-
+obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
new file mode 100644
index 00000000000..8341632d260
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -0,0 +1,150 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n8x0.c
+ *
+ * Copyright (C) 2005-2009 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/stddef.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/musb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/mcspi.h>
+#include <mach/onenand.h>
+#include <mach/serial.h>
+
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel = 1,
+};
+
+static struct spi_board_info n800_spi_board_info[] __initdata = {
+	{
+		.modalias	= "p54spi",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.max_speed_hz   = 48000000,
+		.controller_data = &p54spi_mcspi_config,
+	},
+};
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x400000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 26,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READ,
+};
+
+static void __init n8x0_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static void __init n8x0_onenand_init(void) {}
+
+#endif
+
+static void __init n8x0_map_io(void)
+{
+	omap2_set_globals_242x();
+	omap2_map_common_io();
+}
+
+static void __init n8x0_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init n8x0_init_machine(void)
+{
+	/* FIXME: add n810 spi devices */
+	spi_register_board_info(n800_spi_board_info,
+				ARRAY_SIZE(n800_spi_board_info));
+
+	omap_serial_init();
+	n8x0_onenand_init();
+}
+
+MACHINE_START(NOKIA_N800, "Nokia N800")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810, "Nokia N810")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= n8x0_map_io,
+	.init_irq	= n8x0_init_irq,
+	.init_machine	= n8x0_init_machine,
+	.timer		= &omap_timer,
+MACHINE_END
-- 
cgit v1.2.3


From af933f4729f2cc25306f1a514d55c248da480d66 Mon Sep 17 00:00:00 2001
From: Kalle Valo <kalle.valo@iki.fi>
Date: Fri, 28 Aug 2009 10:51:38 -0700
Subject: OMAP2: n8x0: add n8x0_defconfig

Add defconfig file for OMAP2 N800 and N810 devices.

Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/n8x0_defconfig | 1104 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 1104 insertions(+)
 create mode 100644 arch/arm/configs/n8x0_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
new file mode 100644
index 00000000000..8da75dede52
--- /dev/null
+++ b/arch/arm/configs/n8x0_defconfig
@@ -0,0 +1,1104 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc5
+# Thu Aug  6 22:17:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP2_TUSB6010=y
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_NOKIA_N8X0=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_HAVE_MTD_OTP=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_ONENAND_OTP=y
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_TUSB6010=y
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_TUSB_OMAP_DMA=y
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 613f77696e2c489e87def86a443fb4889acb95aa Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Fri, 28 Aug 2009 10:54:40 -0700
Subject: OMAP: iommu: fix wrong argument in flush_cache_vmap()

The second argument should be the end address, not the
length. Actually there will not be any effect on the behavior of this
driver since flush_cache_vmap() calls flush_cache_all() in the end.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iovmm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 2fce2c151a9..6fc52fcbdc0 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -199,7 +199,7 @@ static void *vmap_sg(const struct sg_table *sgt)
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, total);
+	flush_cache_vmap(new->addr, new->addr + total);
 	return new->addr;
 
 err_out:
-- 
cgit v1.2.3


From 14e0e6796a0d460ac6f7727616161dc317bbbf3a Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Fri, 28 Aug 2009 10:54:41 -0700
Subject: OMAP: iommu: add initial debugfs support

This enables to peek the following data.

$ /debug/iommu/isp# ls
mem             nr_tlb_entries  regs
mmap            pagetable       tlb
$ /debug/iommu/isp# head pagetable
L:      da:      pa:
-----------------------------------------
2: 00001000 8ae4a002
2: 00002000 8e7bb002
2: 00003000 8ae49002
2: 00004000 8ae65002
.....

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/iommu2.c            |  19 +-
 arch/arm/plat-omap/Kconfig              |   4 +
 arch/arm/plat-omap/Makefile             |   1 +
 arch/arm/plat-omap/include/mach/iommu.h |   6 +-
 arch/arm/plat-omap/iommu-debug.c        | 415 ++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/iommu.c              |  23 +-
 6 files changed, 449 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-omap/iommu-debug.c

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 015f22a53ea..2d9b5cc981c 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -217,10 +217,19 @@ static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
 }
 
 #define pr_reg(name)							\
-	p += sprintf(p, "%20s: %08x\n",					\
-		     __stringify(name), iommu_read_reg(obj, MMU_##name));
-
-static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+	do {								\
+		ssize_t bytes;						\
+		const char *str = "%20s: %08x\n";			\
+		const int maxcol = 32;					\
+		bytes = snprintf(p, maxcol, str, __stringify(name),	\
+				 iommu_read_reg(obj, MMU_##name));	\
+		p += bytes;						\
+		len -= bytes;						\
+		if (len < maxcol)					\
+			goto out;					\
+	} while (0)
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
 {
 	char *p = buf;
 
@@ -242,7 +251,7 @@ static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
 	pr_reg(READ_CAM);
 	pr_reg(READ_RAM);
 	pr_reg(EMU_FAULT_AD);
-
+out:
 	return p - buf;
 }
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index efe85d09519..ab9f9efc9b6 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -120,6 +120,10 @@ config OMAP_MBOX_FWK
 config OMAP_IOMMU
 	tristate
 
+config OMAP_IOMMU_DEBUG
+	depends on OMAP_IOMMU
+	tristate
+
 choice
         prompt "System timer"
 	default OMAP_MPU_TIMER
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index a8327952395..769a4c20036 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
+obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
index 769b00b4c34..46d41ac83db 100644
--- a/arch/arm/plat-omap/include/mach/iommu.h
+++ b/arch/arm/plat-omap/include/mach/iommu.h
@@ -95,7 +95,7 @@ struct iommu_functions {
 
 	void (*save_ctx)(struct iommu *obj);
 	void (*restore_ctx)(struct iommu *obj);
-	ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
 };
 
 struct iommu_platform_data {
@@ -162,7 +162,7 @@ extern void uninstall_iommu_arch(const struct iommu_functions *ops);
 extern int foreach_iommu_device(void *data,
 				int (*fn)(struct device *, void *));
 
-extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
-extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
 
 #endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
new file mode 100644
index 00000000000..c799b3b0d70
--- /dev/null
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -0,0 +1,415 @@
+/*
+ * omap iommu: debugfs interface
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+#define MAXCOLUMN 100 /* for short messages */
+
+static DEFINE_MUTEX(iommu_debug_lock);
+
+static struct dentry *iommu_debug_root;
+
+static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	u32 ver = iommu_arch_version();
+	char buf[MAXCOLUMN], *p = buf;
+
+	p += sprintf(p, "H/W version: %d.%d\n", (ver >> 4) & 0xf , ver & 0xf);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+}
+
+static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	ssize_t bytes;
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	bytes = iommu_dump_ctx(obj, p, count);
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, bytes);
+
+	mutex_unlock(&iommu_debug_lock);
+	kfree(buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	ssize_t bytes, rest;
+
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	p += sprintf(p, "%8s %8s\n", "cam:", "ram:");
+	p += sprintf(p, "-----------------------------------------\n");
+	rest = count - (p - buf);
+	p += dump_tlb_entries(obj, p, rest);
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	kfree(buf);
+
+	return bytes;
+}
+
+static ssize_t debug_write_pagetable(struct file *file,
+		     const char __user *userbuf, size_t count, loff_t *ppos)
+{
+	struct iotlb_entry e;
+	struct cr_regs cr;
+	int err;
+	struct iommu *obj = file->private_data;
+	char buf[MAXCOLUMN], *p = buf;
+
+	count = min(count, sizeof(buf));
+
+	mutex_lock(&iommu_debug_lock);
+	if (copy_from_user(p, userbuf, count)) {
+		mutex_unlock(&iommu_debug_lock);
+		return -EFAULT;
+	}
+
+	sscanf(p, "%x %x", &cr.cam, &cr.ram);
+	if (!cr.cam || !cr.ram) {
+		mutex_unlock(&iommu_debug_lock);
+		return -EINVAL;
+	}
+
+	iotlb_cr_to_e(&cr, &e);
+	err = iopgtable_store_entry(obj, &e);
+	if (err)
+		dev_err(obj->dev, "%s: fail to store cr\n", __func__);
+
+	mutex_unlock(&iommu_debug_lock);
+	return count;
+}
+
+#define dump_ioptable_entry_one(lv, da, val)			\
+	({							\
+		int __err = 0;					\
+		ssize_t bytes;					\
+		const int maxcol = 22;				\
+		const char *str = "%d: %08x %08x\n";		\
+		bytes = snprintf(p, maxcol, str, lv, da, val);	\
+		p += bytes;					\
+		len -= bytes;					\
+		if (len < maxcol)				\
+			__err = -ENOMEM;			\
+		__err;						\
+	})
+
+static ssize_t dump_ioptable(struct iommu *obj, char *buf, ssize_t len)
+{
+	int i;
+	u32 *iopgd;
+	char *p = buf;
+
+	spin_lock(&obj->page_table_lock);
+
+	iopgd = iopgd_offset(obj, 0);
+	for (i = 0; i < PTRS_PER_IOPGD; i++, iopgd++) {
+		int j, err;
+		u32 *iopte;
+		u32 da;
+
+		if (!*iopgd)
+			continue;
+
+		if (!(*iopgd & IOPGD_TABLE)) {
+			da = i << IOPGD_SHIFT;
+
+			err = dump_ioptable_entry_one(1, da, *iopgd);
+			if (err)
+				goto out;
+			continue;
+		}
+
+		iopte = iopte_offset(iopgd, 0);
+
+		for (j = 0; j < PTRS_PER_IOPTE; j++, iopte++) {
+			if (!*iopte)
+				continue;
+
+			da = (i << IOPGD_SHIFT) + (j << IOPTE_SHIFT);
+			err = dump_ioptable_entry_one(2, da, *iopgd);
+			if (err)
+				goto out;
+		}
+	}
+out:
+	spin_unlock(&obj->page_table_lock);
+
+	return p - buf;
+}
+
+static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
+				    size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	size_t bytes;
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	p += sprintf(p, "L: %8s %8s\n", "da:", "pa:");
+	p += sprintf(p, "-----------------------------------------\n");
+
+	mutex_lock(&iommu_debug_lock);
+
+	bytes = PAGE_SIZE - (p - buf);
+	p += dump_ioptable(obj, p, bytes);
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	struct iovm_struct *tmp;
+	int uninitialized_var(i);
+	ssize_t bytes;
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	p += sprintf(p, "%-3s %-8s %-8s %6s %8s\n",
+		     "No", "start", "end", "size", "flags");
+	p += sprintf(p, "-------------------------------------------------\n");
+
+	mutex_lock(&iommu_debug_lock);
+
+	list_for_each_entry(tmp, &obj->mmap, list) {
+		size_t len;
+		const char *str = "%3d %08x-%08x %6x %8x\n";
+		const int maxcol = 39;
+
+		len = tmp->da_end - tmp->da_start;
+		p += snprintf(p, maxcol, str,
+			      i, tmp->da_start, tmp->da_end, len, tmp->flags);
+
+		if (PAGE_SIZE - (p - buf) < maxcol)
+			break;
+		i++;
+	}
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
+			      size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	char *p, *buf;
+	struct iovm_struct *area;
+	ssize_t bytes;
+
+	count = min_t(ssize_t, count, PAGE_SIZE);
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	area = find_iovm_area(obj, (u32)ppos);
+	if (IS_ERR(area)) {
+		bytes = -EINVAL;
+		goto err_out;
+	}
+	memcpy(p, area->va, count);
+	p += count;
+
+	bytes = simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+err_out:
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return bytes;
+}
+
+static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct iommu *obj = file->private_data;
+	struct iovm_struct *area;
+	char *p, *buf;
+
+	count = min_t(size_t, count, PAGE_SIZE);
+
+	buf = (char *)__get_free_page(GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	p = buf;
+
+	mutex_lock(&iommu_debug_lock);
+
+	if (copy_from_user(p, userbuf, count)) {
+		count =  -EFAULT;
+		goto err_out;
+	}
+
+	area = find_iovm_area(obj, (u32)ppos);
+	if (IS_ERR(area)) {
+		count = -EINVAL;
+		goto err_out;
+	}
+	memcpy(area->va, p, count);
+err_out:
+	mutex_unlock(&iommu_debug_lock);
+	free_page((unsigned long)buf);
+
+	return count;
+}
+
+static int debug_open_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+#define DEBUG_FOPS(name)						\
+	static const struct file_operations debug_##name##_fops = {	\
+		.open = debug_open_generic,				\
+		.read = debug_read_##name,				\
+		.write = debug_write_##name,				\
+	};
+
+#define DEBUG_FOPS_RO(name)						\
+	static const struct file_operations debug_##name##_fops = {	\
+		.open = debug_open_generic,				\
+		.read = debug_read_##name,				\
+	};
+
+DEBUG_FOPS_RO(ver);
+DEBUG_FOPS_RO(regs);
+DEBUG_FOPS_RO(tlb);
+DEBUG_FOPS(pagetable);
+DEBUG_FOPS_RO(mmap);
+DEBUG_FOPS(mem);
+
+#define __DEBUG_ADD_FILE(attr, mode)					\
+	{								\
+		struct dentry *dent;					\
+		dent = debugfs_create_file(#attr, mode, parent,		\
+					   obj, &debug_##attr##_fops);	\
+		if (!dent)						\
+			return -ENOMEM;					\
+	}
+
+#define DEBUG_ADD_FILE(name) __DEBUG_ADD_FILE(name, 600)
+#define DEBUG_ADD_FILE_RO(name) __DEBUG_ADD_FILE(name, 400)
+
+static int iommu_debug_register(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iommu *obj = platform_get_drvdata(pdev);
+	struct dentry *d, *parent;
+
+	if (!obj || !obj->dev)
+		return -EINVAL;
+
+	d = debugfs_create_dir(obj->name, iommu_debug_root);
+	if (!d)
+		return -ENOMEM;
+	parent = d;
+
+	d = debugfs_create_u8("nr_tlb_entries", 400, parent,
+			      (u8 *)&obj->nr_tlb_entries);
+	if (!d)
+		return -ENOMEM;
+
+	DEBUG_ADD_FILE_RO(ver);
+	DEBUG_ADD_FILE_RO(regs);
+	DEBUG_ADD_FILE_RO(tlb);
+	DEBUG_ADD_FILE(pagetable);
+	DEBUG_ADD_FILE_RO(mmap);
+	DEBUG_ADD_FILE(mem);
+
+	return 0;
+}
+
+static int __init iommu_debug_init(void)
+{
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("iommu", NULL);
+	if (!d)
+		return -ENOMEM;
+	iommu_debug_root = d;
+
+	err = foreach_iommu_device(d, iommu_debug_register);
+	if (err)
+		goto err_out;
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(iommu_debug_root);
+	return err;
+}
+module_init(iommu_debug_init)
+
+static void __exit iommu_debugfs_exit(void)
+{
+	debugfs_remove_recursive(iommu_debug_root);
+}
+module_exit(iommu_debugfs_exit)
+
+MODULE_DESCRIPTION("omap iommu: debugfs interface");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 4a030139901..4b601270730 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -351,16 +351,14 @@ EXPORT_SYMBOL_GPL(flush_iotlb_all);
 
 #if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
 
-ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
 {
-	ssize_t bytes;
-
 	if (!obj || !buf)
 		return -EINVAL;
 
 	clk_enable(obj->clk);
 
-	bytes = arch_iommu->dump_ctx(obj, buf);
+	bytes = arch_iommu->dump_ctx(obj, buf, bytes);
 
 	clk_disable(obj->clk);
 
@@ -368,7 +366,7 @@ ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
 }
 EXPORT_SYMBOL_GPL(iommu_dump_ctx);
 
-static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
 {
 	int i;
 	struct iotlb_lock saved, l;
@@ -379,7 +377,7 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
 	iotlb_lock_get(obj, &saved);
 	memcpy(&l, &saved, sizeof(saved));
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
+	for (i = 0; i < num; i++) {
 		struct cr_regs tmp;
 
 		iotlb_lock_get(obj, &l);
@@ -402,18 +400,21 @@ static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
  * @obj:	target iommu
  * @buf:	output buffer
  **/
-size_t dump_tlb_entries(struct iommu *obj, char *buf)
+size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t bytes)
 {
-	int i, n;
+	int i, num;
 	struct cr_regs *cr;
 	char *p = buf;
 
-	cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+	num = bytes / sizeof(*cr);
+	num = min(obj->nr_tlb_entries, num);
+
+	cr = kcalloc(num, sizeof(*cr), GFP_KERNEL);
 	if (!cr)
 		return 0;
 
-	n = __dump_tlb_entries(obj, cr);
-	for (i = 0; i < n; i++)
+	num = __dump_tlb_entries(obj, cr, num);
+	for (i = 0; i < num; i++)
 		p += iotlb_dump_cr(obj, cr + i, p);
 	kfree(cr);
 
-- 
cgit v1.2.3


From c426df87d8197cde077d03c808f52e3a17045b09 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:08 -0700
Subject: OMAP2/3: Pass irqflags to 8250 driver

Pass irqflags to 8250 driver with platform_data. At least Zoom2 has
IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq.

This patch is dependent on 8250 driver changes getting accepted upstream:
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-zoom-debugboard.c | 2 ++
 arch/arm/mach-omap2/serial.c                | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index bac5c4321ff..f546063775b 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -12,6 +12,7 @@
 #include <linux/gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smsc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/gpmc.h>
 
@@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.mapbase	= 0x10000000,
 		.irq		= OMAP_GPIO_IRQ(102),
 		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
 		.iotype		= UPIO_MEM,
 		.regshift	= 1,
 		.uartclk	= QUART_CLK,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 409b03309af..dd3c735b558 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -460,7 +460,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	p->flags |= UPF_SHARE_IRQ;
+	p->irqflags |= IRQF_SHARED;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
-- 
cgit v1.2.3


From 8870d946e1ff459453296733f9f389a3a5bc2983 Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Fri, 28 Aug 2009 11:24:09 -0700
Subject: OMAP3: 3430SDP: Fix defconfig

This patch makes the SDP boot again with the defconfig.

Changes done:

 - Removes other selected boards.
 - Sets the Low Level debug output for UART1.
 - Disables some paripherals from other boards.

Tested on a SDP3430-VE5.1.0 (OMAP3430 ES3.1)

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap_3430sdp_defconfig | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 8fb918d9ba6..9a510eab75a 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 14:17:01 2009
+# Linux kernel version: 2.6.30-omap1
+# Tue Jun 23 10:36:45 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -197,9 +197,9 @@ CONFIG_OMAP_MCBSP=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
@@ -207,10 +207,10 @@ CONFIG_ARCH_OMAP3430=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_MACH_OVERO=y
-CONFIG_MACH_OMAP3_PANDORA=y
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
 
 #
@@ -950,7 +950,7 @@ CONFIG_SPI_OMAP24XX=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-CONFIG_DEBUG_GPIO=y
+# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
 #
@@ -1370,7 +1370,7 @@ CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_MCBSP=y
 # CONFIG_SND_OMAP_SOC_OVERO is not set
 CONFIG_SND_OMAP_SOC_SDP3430=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
 CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_TWL4030=y
-- 
cgit v1.2.3


From ac2a048c3cc7c76d848093298ffa452558a7b2e8 Mon Sep 17 00:00:00 2001
From: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Date: Fri, 28 Aug 2009 11:24:10 -0700
Subject: OMAP3: rx51_defconfig: add twl4030 to rx51 default configuration

twl4030 watchdog will be compiled as a module by default.

Signed-off-by: Atal Shargorodsky <ext-atal.shargorodsky@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/rx51_defconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index f238df66efd..e7e31332c62 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -1006,6 +1006,7 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
+CONFIG_TWL4030_WATCHDOG=m
 
 #
 # USB-based Watchdog Cards
-- 
cgit v1.2.3


From 57b9daa0e18167e8ba449bc236c3f4a755dd1833 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:11 -0700
Subject: OMAP3: MMC: Add mux for pins

For OMAP3 add MMC1 MMC2 pin mux MMC3 mux is not added as there are
multiple configurations possible, so the muxing is left to be done
in board file.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Chikkature Rajashekar <madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c         | 41 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/mux.c             | 50 +++++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mux.h | 28 ++++++++++++++++++++
 3 files changed, 119 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 894cc355818..a2e915639b7 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -513,6 +513,47 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 		}
 	}
+
+	if (cpu_is_omap3430()) {
+		if (controller_nr == 0) {
+			omap_cfg_reg(N28_3430_MMC1_CLK);
+			omap_cfg_reg(M27_3430_MMC1_CMD);
+			omap_cfg_reg(N27_3430_MMC1_DAT0);
+			if (mmc_controller->slots[0].wires == 4 ||
+				mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(N26_3430_MMC1_DAT1);
+				omap_cfg_reg(N25_3430_MMC1_DAT2);
+				omap_cfg_reg(P28_3430_MMC1_DAT3);
+			}
+			if (mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(P27_3430_MMC1_DAT4);
+				omap_cfg_reg(P26_3430_MMC1_DAT5);
+				omap_cfg_reg(R27_3430_MMC1_DAT6);
+				omap_cfg_reg(R25_3430_MMC1_DAT7);
+			}
+		}
+		if (controller_nr == 1) {
+			/* MMC2 */
+			omap_cfg_reg(AE2_3430_MMC2_CLK);
+			omap_cfg_reg(AG5_3430_MMC2_CMD);
+			omap_cfg_reg(AH5_3430_MMC2_DAT0);
+
+			/*
+			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
+			 * in the board-*.c files
+			 */
+			if (mmc_controller->slots[0].wires == 4 ||
+				mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(AH4_3430_MMC2_DAT1);
+				omap_cfg_reg(AG4_3430_MMC2_DAT2);
+				omap_cfg_reg(AF4_3430_MMC2_DAT3);
+			}
+		}
+
+		/*
+		 * For MMC3 the pins need to be muxed in the board-*.c files
+		 */
+	}
 }
 
 void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 43d6b92b65f..f63f3a23782 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -492,6 +492,56 @@ MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+
+/* MMC1 */
+MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC2 */
+MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* MMC3 */
+MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
+		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
+		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 80281c458ba..2c57bad65b0 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -857,6 +857,34 @@ enum omap34xx_index {
 	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
 	H16_34XX_SDRC_CKE0,
 	H17_34XX_SDRC_CKE1,
+
+	/* MMC1 */
+	N28_3430_MMC1_CLK,
+	M27_3430_MMC1_CMD,
+	N27_3430_MMC1_DAT0,
+	N26_3430_MMC1_DAT1,
+	N25_3430_MMC1_DAT2,
+	P28_3430_MMC1_DAT3,
+	P27_3430_MMC1_DAT4,
+	P26_3430_MMC1_DAT5,
+	R27_3430_MMC1_DAT6,
+	R25_3430_MMC1_DAT7,
+
+	/* MMC2 */
+	AE2_3430_MMC2_CLK,
+	AG5_3430_MMC2_CMD,
+	AH5_3430_MMC2_DAT0,
+	AH4_3430_MMC2_DAT1,
+	AG4_3430_MMC2_DAT2,
+	AF4_3430_MMC2_DAT3,
+
+	/* MMC3 */
+	AF10_3430_MMC3_CLK,
+	AC3_3430_MMC3_CMD,
+	AE11_3430_MMC3_DAT0,
+	AH9_3430_MMC3_DAT1,
+	AF13_3430_MMC3_DAT2,
+	AF13_3430_MMC3_DAT3,
 };
 
 struct omap_mux_cfg {
-- 
cgit v1.2.3


From 70ac51ab2cd9ddc7ded24adbe63fc6fd3557e44c Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:13 -0700
Subject: OMAP3: Zoom2: Add TWL4030 support

Add TWL4030 CORE and TWL4030 drivers to Zoom2 board file
TWL drivers enabled are:
	bci
	madc
	usb
	keypad
	mmc

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-zoom2.c | 203 +++++++++++++++++++++++++++++++++++---
 1 file changed, 192 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 3a42eca1ad8..dabba2720a9 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -12,17 +12,84 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
 #include <mach/usb.h>
+#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 
+/* Zoom2 has Qwerty keyboard*/
+static int zoom2_twl4030_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(1, 0, KEY_R),
+	KEY(2, 0, KEY_T),
+	KEY(3, 0, KEY_HOME),
+	KEY(6, 0, KEY_I),
+	KEY(7, 0, KEY_LEFTSHIFT),
+	KEY(0, 1, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(2, 1, KEY_G),
+	KEY(3, 1, KEY_SEND),
+	KEY(6, 1, KEY_K),
+	KEY(7, 1, KEY_ENTER),
+	KEY(0, 2, KEY_X),
+	KEY(1, 2, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(3, 2, KEY_END),
+	KEY(6, 2, KEY_DOT),
+	KEY(7, 2, KEY_CAPSLOCK),
+	KEY(0, 3, KEY_Z),
+	KEY(1, 3, KEY_KPPLUS),
+	KEY(2, 3, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(6, 3, KEY_O),
+	KEY(7, 3, KEY_SPACE),
+	KEY(0, 4, KEY_W),
+	KEY(1, 4, KEY_Y),
+	KEY(2, 4, KEY_U),
+	KEY(3, 4, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(6, 4, KEY_L),
+	KEY(7, 4, KEY_LEFT),
+	KEY(0, 5, KEY_S),
+	KEY(1, 5, KEY_H),
+	KEY(2, 5, KEY_J),
+	KEY(3, 5, KEY_F3),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(6, 5, KEY_M),
+	KEY(4, 5, KEY_ENTER),
+	KEY(7, 5, KEY_RIGHT),
+	KEY(0, 6, KEY_Q),
+	KEY(1, 6, KEY_A),
+	KEY(2, 6, KEY_N),
+	KEY(3, 6, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(7, 6, KEY_UP),
+	KEY(6, 7, KEY_SELECT),
+	KEY(7, 7, KEY_DOWN),
+	KEY(0, 7, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(1, 7, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(2, 7, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(3, 7, KEY_PROG4),	/*MACRO 4 <User defined> */
+	0
+};
+
+static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap		= zoom2_twl4030_keymap,
+	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
+	.rep		= 1,
+};
+
 static void __init omap_zoom2_init_irq(void)
 {
 	omap2_init_common_hw(NULL, NULL);
@@ -33,10 +100,127 @@ static void __init omap_zoom2_init_irq(void)
 static struct omap_board_config_kernel zoom2_config[] __initdata = {
 };
 
+static struct regulator_consumer_supply zoom2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom2_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom2_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom2_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom2_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom2_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom2_vmmc1_supply.dev = mmc[0].dev;
+	zoom2_vsim_supply.dev = mmc[0].dev;
+	zoom2_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
+}
+
+
+static int zoom2_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
+};
+
+static struct twl4030_bci_platform_data zoom2_bci_data = {
+	.battery_tmp_tbl	= zoom2_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
+};
+
+static struct twl4030_usb_data zoom2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom2_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom2_madc_data = {
+	.irq_line	= 1,
 };
 
 static struct twl4030_platform_data zoom2_twldata = {
@@ -44,7 +228,15 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.bci		= &zoom2_bci_data,
+	.madc		= &zoom2_madc_data,
+	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
+	.keypad		= &zoom2_kp_twl4030_data,
+	.vmmc1          = &zoom2_vmmc1,
+	.vmmc2          = &zoom2_vmmc2,
+	.vsim           = &zoom2_vsim,
+
 };
 
 static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
@@ -65,16 +257,6 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
 extern int __init omap_zoom2_debugboard_init(void);
 
 static void __init omap_zoom2_init(void)
@@ -84,7 +266,6 @@ static void __init omap_zoom2_init(void)
 	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
-	twl4030_mmc_init(mmc);
 	usb_musb_init();
 }
 
-- 
cgit v1.2.3


From 1eab46a2ea36deda9621ae507319812bb1f82f92 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 28 Aug 2009 11:24:14 -0700
Subject: OMAP3: Zoom2: Update board defconfig

Update defconfig for Zoom2 to include
TWL4030 core
TWL4030 drivers (bci, gpio, keypad, usb, mmc)

Also sync the defconfig after issuing a menuconfig

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap_zoom2_defconfig | 484 ++++++++++++++++++++++++++++------
 1 file changed, 408 insertions(+), 76 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index 213fe9c5eaa..f1739fae7ed 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
+# Linux kernel version: 2.6.30-omap1
+# Fri Jun 12 17:25:46 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -39,44 +37,61 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -84,19 +99,13 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,7 +130,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -134,10 +140,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -158,14 +164,17 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # TI OMAP Implementations
@@ -174,6 +183,7 @@ CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
 # CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
 
 #
 # OMAP Feature Selections
@@ -185,6 +195,7 @@ CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -192,25 +203,20 @@ CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
 #
 # OMAP Board Type
 #
-# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
 # CONFIG_MACH_OMAP_LDP is not set
-CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
 # CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP_ZOOM2=y
 
 #
 # Processor Type
@@ -239,6 +245,10 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 # CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -254,26 +264,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -287,9 +303,10 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -309,13 +326,23 @@ CONFIG_VFPv3=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -378,7 +405,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -389,8 +418,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -416,14 +445,28 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_OMAP_STI is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -461,14 +504,20 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -501,8 +550,10 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -519,7 +570,10 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -561,17 +615,25 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -607,13 +669,15 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -639,6 +703,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Other I2C/SMBus bus drivers
@@ -650,14 +715,11 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_TWL4030_POWEROFF is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -672,12 +734,12 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -685,12 +747,17 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -702,26 +769,34 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
+CONFIG_W1_CON=y
 
 #
 # 1-wire Bus Masters
 #
+# CONFIG_W1_MASTER_DS2490 is not set
 # CONFIG_W1_MASTER_DS2482 is not set
 # CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
 
 #
 # 1-wire Slaves
 #
 # CONFIG_W1_SLAVE_THERM is not set
 # CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
 # CONFIG_W1_SLAVE_DS2433 is not set
 # CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 
@@ -729,11 +804,17 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
 
 #
-# Sonics Silicon Backplane
+# USB-based Watchdog Cards
 #
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
 # CONFIG_SSB is not set
 
 #
@@ -741,12 +822,19 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -756,12 +844,14 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
 # CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -782,10 +872,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -798,19 +890,197 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
-# CONFIG_USB_SUPPORT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -818,11 +1088,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -852,43 +1124,55 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
 
 #
 # File systems
@@ -897,18 +1181,24 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -916,6 +1206,11 @@ CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -937,15 +1232,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -954,6 +1247,7 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -962,6 +1256,7 @@ CONFIG_TMPFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -975,7 +1270,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1045,6 +1339,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
@@ -1062,6 +1357,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1084,21 +1382,36 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1110,17 +1423,28 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1152,7 +1476,7 @@ CONFIG_CRYPTO_PCBC=m
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1189,15 +1513,21 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1205,7 +1535,9 @@ CONFIG_CRC_T10DIF=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From bd04e46558380aaba0caab6325c07a3c6bf27706 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Fri, 28 Aug 2009 11:24:15 -0700
Subject: OMAP3: beagle: add missing twl4030 usb platform_data

without it twl4030_usb driver will not probe.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 201360781ac..d79ea8da627 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -245,11 +245,16 @@ static struct regulator_init_data beagle_vpll2 = {
 	.consumer_supplies	= &beagle_vdvi_supply,
 };
 
+static struct twl4030_usb_data beagle_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 
 	/* platform_data for children goes here */
+	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
-- 
cgit v1.2.3


From 36d568ec055cb3ac4507d38ebabba955cdbb443e Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Fri, 28 Aug 2009 11:24:17 -0700
Subject: OMAP3: update OMAP3 Beagle defconfig

Update the OMAP3 Beagle defconfig to add EHCI, MMC, TWL4030 GPIO support.
Beagle can again use MMC rootfs after this patch.  Tested on BeagleBoard
rev C2.

Patch updated to enable PM and OTG options as suggested by
Eric Witcher <ewitcher@mindspring.com>.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jason Kridner <jkridner@beagleboard.org>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap3_beagle_defconfig | 41 +++++++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 4c6fb7e959d..51c0fa8897c 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -128,6 +128,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -236,6 +237,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 # CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -317,7 +319,12 @@ CONFIG_BINFMT_MISC=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -713,6 +720,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -741,6 +749,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
@@ -787,7 +796,7 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
@@ -798,7 +807,8 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
@@ -806,6 +816,8 @@ CONFIG_USB_MON=y
 #
 # USB Host Controller Drivers
 #
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
@@ -818,10 +830,10 @@ CONFIG_USB_MUSB_SOC=y
 #
 # OMAP 343x high speed USB support
 #
-CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_HOST is not set
 # CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 CONFIG_USB_INVENTRA_DMA=y
@@ -887,8 +899,8 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA25X is not set
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
@@ -906,6 +918,15 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -923,6 +944,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
@@ -981,10 +1003,11 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Voltage and Current regulators
 #
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 
 #
-- 
cgit v1.2.3


From 7285dd7fd375763bfb8ab1ac9cf3f1206f503c16 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 28 Aug 2009 20:25:24 +0200
Subject: clocksource: Resolve cpu hotplug dead lock with TSC unstable

Martin Schwidefsky analyzed it:
To register a clocksource the clocksource_mutex is acquired and if
necessary timekeeping_notify is called to install the clocksource as
the timekeeper clock. timekeeping_notify uses stop_machine which needs
to take cpu_add_remove_lock mutex.
Starting a new cpu is done with the cpu_add_remove_lock mutex held.
native_cpu_up checks the tsc of the new cpu and if the tsc is no good
clocksource_change_rating is called. Which needs the clocksource_mutex
and the deadlock is complete.

The solution is to replace the TSC via the clocksource watchdog
mechanism. Mark the TSC as unstable and schedule the watchdog work so
it gets removed in the watchdog thread context.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <johnstul@us.ibm.com>
---
 arch/x86/kernel/tsc.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 968425422c4..fc3672a303d 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -767,12 +767,14 @@ void mark_tsc_unstable(char *reason)
 {
 	if (!tsc_unstable) {
 		tsc_unstable = 1;
-		printk("Marking TSC unstable due to %s\n", reason);
+		printk(KERN_INFO "Marking TSC unstable due to %s\n", reason);
 		/* Change only the rating, when not registered */
 		if (clocksource_tsc.mult)
-			clocksource_change_rating(&clocksource_tsc, 0);
-		else
+			clocksource_mark_unstable(&clocksource_tsc);
+		else {
+			clocksource_tsc.flags |= CLOCK_SOURCE_UNSTABLE;
 			clocksource_tsc.rating = 0;
+		}
 	}
 }
 
-- 
cgit v1.2.3


From a192a9580bcc41692be1f36b77c3b681827f566a Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 28 Jul 2009 16:45:54 -0400
Subject: ACPI: Move definition of PREFIX from acpi_bus.h to internal..h

Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/pci/mmconfig-shared.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 712443ec6d4..81d3466765c 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -18,6 +18,8 @@
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
 
+#define PREFIX "ACPI: "
+
 /* aperture is up to 256MB but BIOS may reserve less */
 #define MMCONFIG_APER_MIN	(2 * 1024*1024)
 #define MMCONFIG_APER_MAX	(256 * 1024*1024)
-- 
cgit v1.2.3


From 2a4ab640d3c28c2952967e5f63ea495555bf2a5f Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 7 Jul 2009 23:01:15 -0400
Subject: ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n

Some IO-APIC routines are ACPI specific now, but need to
be exposed when CONFIG_ACPI=n for the benefit of SFI.

Remove #ifdef ACPI around these routines:

io_apic_get_unique_id(int ioapic, int apic_id);
io_apic_get_version(int ioapic);
io_apic_get_redir_entries(int ioapic);

Move these routines from ACPI-specific boot.c to io_apic.c:

uniq_ioapic_id(u8 id)
mp_find_ioapic()
mp_find_ioapic_pin()
mp_register_ioapic()

Also, since uniq_ioapic_id() is now no longer static,
re-name it to io_apic_unique_id() for consistency
with the other public io_apic routines.

For simplicity, do not #ifdef the resulting code ACPI || SFI,
thought that could be done in the future if it is important
to optimize the !ACPI !SFI IO-APIC x86 kernel for size.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
---
 arch/x86/include/asm/io_apic.h |  13 +++++-
 arch/x86/kernel/acpi/boot.c    | 102 +---------------------------------------
 arch/x86/kernel/apic/io_apic.c | 103 ++++++++++++++++++++++++++++++++++++++---
 3 files changed, 109 insertions(+), 109 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 330ee807f89..85232d32fcb 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,11 +150,10 @@ extern int timer_through_8259;
 #define io_apic_assign_pci_irqs \
 	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
 
-#ifdef CONFIG_ACPI
+extern u8 io_apic_unique_id(u8 id);
 extern int io_apic_get_unique_id(int ioapic, int apic_id);
 extern int io_apic_get_version(int ioapic);
 extern int io_apic_get_redir_entries(int ioapic);
-#endif /* CONFIG_ACPI */
 
 struct io_apic_irq_attr;
 extern int io_apic_set_pci_routing(struct device *dev, int irq,
@@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq,
 			      int polarity, int vector, int pin);
 extern void ioapic_write_entry(int apic, int pin,
 			       struct IO_APIC_route_entry e);
+
+struct mp_ioapic_gsi{
+	int gsi_base;
+	int gsi_end;
+};
+extern struct mp_ioapic_gsi  mp_gsi_routing[];
+int mp_find_ioapic(int gsi);
+int mp_find_ioapic_pin(int ioapic, int gsi);
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a0285..7e62d1eb8e3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 extern int es7000_plat;
 #endif
 
-static struct {
-	int gsi_base;
-	int gsi_end;
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int mp_find_ioapic(int gsi)
-{
-	int i = 0;
-
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-		    && (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
-	}
-
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-	return -1;
-}
-
-int mp_find_ioapic_pin(int ioapic, int gsi)
-{
-	if (WARN_ON(ioapic == -1))
-		return -1;
-	if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
-		return -1;
-
-	return gsi - mp_ioapic_routing[ioapic].gsi_base;
-}
-
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return io_apic_get_unique_id(nr_ioapics, id);
-	else
-		return id;
-#else
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
-#endif
-}
-
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
-
-	idx = nr_ioapics;
-
-	mp_ioapics[idx].type = MP_IOAPIC;
-	mp_ioapics[idx].flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].apicaddr = address;
-
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-	mp_ioapics[idx].apicver = io_apic_get_version(idx);
-
-	/*
-	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
-	 */
-	mp_ioapic_routing[idx].gsi_base = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
-	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
-	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
-
 int __init acpi_probe_gsi(void)
 {
 	int idx;
@@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void)
 
 	max_gsi = 0;
 	for (idx = 0; idx < nr_ioapics; idx++) {
-		gsi = mp_ioapic_routing[idx].gsi_end;
+		gsi = mp_gsi_routing[idx].gsi_end;
 
 		if (gsi > max_gsi)
 			max_gsi = gsi;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d2ed6c5ddc8..a8c0232b389 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -85,6 +85,9 @@ int nr_ioapic_registers[MAX_IO_APICS];
 struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
+/* IO APIC gsi routing info */
+struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
+
 /* MP IRQ source entries */
 struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
@@ -3941,11 +3944,28 @@ int io_apic_set_pci_routing(struct device *dev, int irq,
 	return __io_apic_set_pci_routing(dev, irq, irq_attr);
 }
 
-/* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
+u8 __init io_apic_unique_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return io_apic_get_unique_id(nr_ioapics, id);
+	else
+		return id;
+#else
+	int i;
+	DECLARE_BITMAP(used, 256);
 
-#ifdef CONFIG_ACPI
+	bitmap_zero(used, 256);
+	for (i = 0; i < nr_ioapics; i++) {
+		struct mpc_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->apicid, used);
+	}
+	if (!test_bit(id, used))
+		return id;
+	return find_first_zero_bit(used, 256);
+#endif
+}
 
 #ifdef CONFIG_X86_32
 int __init io_apic_get_unique_id(int ioapic, int apic_id)
@@ -4054,8 +4074,6 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 	return 0;
 }
 
-#endif /* CONFIG_ACPI */
-
 /*
  * This function currently is only a helper for the i386 smp boot process where
  * we need to reprogram the ioredtbls to cater for the cpus which have come online
@@ -4201,3 +4219,76 @@ void __init ioapic_insert_resources(void)
 		r++;
 	}
 }
+
+int mp_find_ioapic(int gsi)
+{
+	int i = 0;
+
+	/* Find the IOAPIC that manages this GSI. */
+	for (i = 0; i < nr_ioapics; i++) {
+		if ((gsi >= mp_gsi_routing[i].gsi_base)
+		    && (gsi <= mp_gsi_routing[i].gsi_end))
+			return i;
+	}
+
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+	if (WARN_ON(ioapic == -1))
+		return -1;
+	if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end))
+		return -1;
+
+	return gsi - mp_gsi_routing[ioapic].gsi_base;
+}
+
+static int bad_ioapic(unsigned long address)
+{
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+		return 1;
+	}
+	if (!address) {
+		printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
+		       " found in table, skipping!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+	int idx = 0;
+
+	if (bad_ioapic(address))
+		return;
+
+	idx = nr_ioapics;
+
+	mp_ioapics[idx].type = MP_IOAPIC;
+	mp_ioapics[idx].flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].apicaddr = address;
+
+	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	mp_ioapics[idx].apicid = io_apic_unique_id(id);
+	mp_ioapics[idx].apicver = io_apic_get_version(idx);
+
+	/*
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+	 */
+	mp_gsi_routing[idx].gsi_base = gsi_base;
+	mp_gsi_routing[idx].gsi_end = gsi_base +
+	    io_apic_get_redir_entries(idx);
+
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+	       mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end);
+
+	nr_ioapics++;
+}
-- 
cgit v1.2.3


From f4a2d5840e9f0e48d1a787b66e7346087a756029 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 28 Jul 2009 16:48:02 -0400
Subject: ACPI, PCI: Change PREFIX to "PCI" from "ACPI" in mmconfig-shared.c

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/mmconfig-shared.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 81d3466765c..b707a0141d3 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -18,7 +18,7 @@
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
 
-#define PREFIX "ACPI: "
+#define PREFIX "PCI: "
 
 /* aperture is up to 256MB but BIOS may reserve less */
 #define MMCONFIG_APER_MIN	(2 * 1024*1024)
-- 
cgit v1.2.3


From e55a5999ffcf72dc4d43d73618957964cb87065a Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 28 Jul 2009 17:41:53 +0800
Subject: ACPI: Handle CONFIG_ACPI=n better from linux/acpi.h

linux/acpi.h is the top level header for interfacing
with the ACPI sub-system, so acpi_disabled should be
up there instead of down in asm/acpi.h -- particularly
since asm/acpi.h doesn't exist for all architectures.

Same story for acpi_table_parse(), which is a top-level
API to Linux/ACPI.

This is necessary for building some code that
used to always depend on CONFIG_ACPI=y, but will soon
also need to build with CONFIG_ACPI=n.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/include/asm/acpi.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 20d1465a2ab..4518dc50090 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -144,7 +144,6 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 
 #else /* !CONFIG_ACPI */
 
-#define acpi_disabled 1
 #define acpi_lapic 0
 #define acpi_ioapic 0
 static inline void acpi_noirq_set(void) { }
-- 
cgit v1.2.3


From efafc8b213e67ed148a5b53ade29ee7b48af907d Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Fri, 14 Aug 2009 15:23:29 -0400
Subject: x86: add arch-specific SFI support

arch/x86/kernel/sfi.c serves the dual-purpose of supporting the
SFI core with arch specific code, as well as a home for the
arch-specific code that uses SFI.

analogous to ACPI, drivers/sfi/Kconfig is pulled in by arch/x86/Kconfig

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
---
 arch/x86/Kconfig         |   2 +
 arch/x86/kernel/Makefile |   1 +
 arch/x86/kernel/setup.c  |   3 ++
 arch/x86/kernel/sfi.c    | 133 +++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 139 insertions(+)
 create mode 100644 arch/x86/kernel/sfi.c

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 13ffa5df37d..d8ba42418d3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1683,6 +1683,8 @@ source "kernel/power/Kconfig"
 
 source "drivers/acpi/Kconfig"
 
+source "drivers/sfi/Kconfig"
+
 config X86_APM_BOOT
 	bool
 	default y
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 430d5b24af7..6321afaafb2 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -55,6 +55,7 @@ obj-y				+= step.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-y				+= cpu/
 obj-y				+= acpi/
+obj-$(CONFIG_SFI)		+= sfi.o
 obj-y				+= reboot.o
 obj-$(CONFIG_MCA)		+= mca_32.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 63f32d220ef..d784ea20760 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -27,6 +27,7 @@
 #include <linux/screen_info.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
+#include <linux/sfi.h>
 #include <linux/apm_bios.h>
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
@@ -990,6 +991,8 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	acpi_boot_init();
 
+	sfi_init();
+
 #if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
 	/*
 	 * get boot-time SMP configuration:
diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
new file mode 100644
index 00000000000..761df3f759c
--- /dev/null
+++ b/arch/x86/kernel/sfi.c
@@ -0,0 +1,133 @@
+/*
+ * sfi.c - x86 architecture SFI support.
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#define KMSG_COMPONENT "SFI"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/bootmem.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/efi.h>
+#include <linux/irq.h>
+#include <linux/sfi.h>
+#include <linux/io.h>
+
+#include <asm/io_apic.h>
+#include <asm/pgtable.h>
+#include <asm/mpspec.h>
+#include <asm/setup.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+
+void __init mp_sfi_register_lapic_address(unsigned long address)
+{
+	mp_lapic_addr = address;
+
+	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid = read_apic_id();
+
+	pr_info("Boot CPU = %d\n", boot_cpu_physical_apicid);
+}
+
+/* All CPUs enumerated by SFI must be present and enabled */
+void __cpuinit mp_sfi_register_lapic(u8 id)
+{
+	int boot_cpu = 0;
+
+	if (MAX_APICS - id <= 0) {
+		pr_warning("Processor #%d invalid (max %d)\n",
+			id, MAX_APICS);
+		return;
+	}
+
+	if (id == boot_cpu_physical_apicid)
+		boot_cpu = 1;
+	pr_info("registering lapic[%d]\n", id);
+
+	generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR)));
+}
+
+static int __init sfi_parse_cpus(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_cpu_table_entry *pentry;
+	int i;
+	int cpu_num;
+
+	sb = (struct sfi_table_simple *)table;
+	cpu_num = SFI_GET_NUM_ENTRIES(sb, struct sfi_cpu_table_entry);
+	pentry = (struct sfi_cpu_table_entry *)sb->pentry;
+
+	for (i = 0; i < cpu_num; i++) {
+		mp_sfi_register_lapic(pentry->apic_id);
+		pentry++;
+	}
+
+	smp_found_config = 1;
+	return 0;
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
+static u32 gsi_base;
+
+static int __init sfi_parse_ioapic(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_apic_table_entry *pentry;
+	int i, num;
+
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry);
+	pentry = (struct sfi_apic_table_entry *)sb->pentry;
+
+	for (i = 0; i < num; i++) {
+		mp_register_ioapic(i, pentry->phys_addr, gsi_base);
+		gsi_base += io_apic_get_redir_entries(i);
+		pentry++;
+	}
+
+	WARN(pic_mode, KERN_WARNING
+		"SFI: pic_mod shouldn't be 1 when IOAPIC table is present\n");
+	pic_mode = 0;
+	return 0;
+}
+#endif /* CONFIG_X86_IO_APIC */
+
+/*
+ * sfi_platform_init(): register lapics & io-apics
+ */
+int __init sfi_platform_init(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	mp_sfi_register_lapic_address(sfi_lapic_addr);
+	sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus);
+#endif
+#ifdef CONFIG_X86_IO_APIC
+	sfi_table_parse(SFI_SIG_APIC, NULL, NULL, sfi_parse_ioapic);
+#endif
+	return 0;
+}
-- 
cgit v1.2.3


From 5f0db7a2fb78895a197f64e548333b3bbd433996 Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Fri, 14 Aug 2009 15:37:50 -0400
Subject: SFI: Hook PCI MMCONFIG

First check ACPI, and if that fails, ask SFI to find the MCFG.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/Kconfig               | 2 +-
 arch/x86/pci/mmconfig-shared.c | 6 ++++--
 arch/x86/pci/mmconfig_32.c     | 2 +-
 3 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d8ba42418d3..4c92c91f354 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1880,7 +1880,7 @@ config PCI_DIRECT
 
 config PCI_MMCONFIG
 	def_bool y
-	depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
+	depends on X86_32 && PCI && (ACPI || SFI) && (PCI_GOMMCONFIG || PCI_GOANY)
 
 config PCI_OLPC
 	def_bool y
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index b707a0141d3..602c172d3bd 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -13,10 +13,12 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
+#include <linux/sfi_acpi.h>
 #include <linux/bitmap.h>
 #include <linux/sort.h>
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
+#include <asm/acpi.h>
 
 #define PREFIX "PCI: "
 
@@ -493,7 +495,7 @@ static void __init pci_mmcfg_reject_broken(int early)
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early)
+		if (!early && !acpi_disabled)
 			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
@@ -608,7 +610,7 @@ static void __init __pci_mmcfg_init(int early)
 	}
 
 	if (!known_bridge)
-		acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+		acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
 
 	pci_mmcfg_reject_broken(early);
 
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index 8b2d561046a..f10a7e94a84 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -11,9 +11,9 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/acpi.h>
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
+#include <acpi/acpi.h>
 
 /* Assume systems with more busses have correct MCFG */
 #define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
-- 
cgit v1.2.3


From 825e1e23914b9c3dbc49ee8c5a1d1cb421c1270a Mon Sep 17 00:00:00 2001
From: Grant Grundler <grundler@parisc-linux.org>
Date: Fri, 28 Aug 2009 15:00:36 -0400
Subject: parisc: fix warning in traps.c

On Tue, Aug 18, 2009 at 01:45:17PM -0400, John David Anglin wrote:
>  CC      arch/parisc/kernel/traps.o
> arch/parisc/kernel/traps.c: In function 'handle_interruption':
> arch/parisc/kernel/traps.c:535:18: warning: operation on 'regs->iasq[0]'
> may be undefined

Yes - Line 535 should use both [0] and [1].

Reported-by: John David Anglin <dave@hiauly1.hia.nrc.ca>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/parisc/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 528f0ff9b27..8b58bf0b7d5 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -532,7 +532,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 	  	/* Kill the user process later */
 	  	regs->iaoq[0] = 0 | 3;
 		regs->iaoq[1] = regs->iaoq[0] + 4;
-	 	regs->iasq[0] = regs->iasq[0] = regs->sr[7];
+	 	regs->iasq[0] = regs->iasq[1] = regs->sr[7];
 		regs->gr[0] &= ~PSW_B;
 		return;
 	}
-- 
cgit v1.2.3


From 4923576b8ac5bfd36ab2beb176aeb747aaab7e41 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Thu, 27 Aug 2009 23:25:03 +0000
Subject: net: sh_eth: add value of ether_link pin in platform_data

The method of ETHER_LINK pin is board dependence.
This patch adding paramters are:
 - no_ether_link          : If set to 1, do not use ETHER_LINK
 - ether_link_active_low  : If set to 1, ETHER_LINK is active low.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sh/include/asm/sh_eth.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
index bb832584f3c..acf99700dee 100644
--- a/arch/sh/include/asm/sh_eth.h
+++ b/arch/sh/include/asm/sh_eth.h
@@ -6,6 +6,9 @@ enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
 struct sh_eth_plat_data {
 	int phy;
 	int edmac_endian;
+
+	unsigned no_ether_link:1;
+	unsigned ether_link_active_low:1;
 };
 
 #endif
-- 
cgit v1.2.3


From 4aa5ac4ef44dd8c986241c54298abd7910b78b3f Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Fri, 28 Aug 2009 21:37:20 +0000
Subject: sh: Only shout about fixing up unexpected unaligned accesses

Some unaligned accesses are completely expected. For example, the
trapped_io code uses the unaligned access fixup code path so there's no
need to warn about having to fixup the unaligned access.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/system_32.h | 2 +-
 arch/sh/kernel/io_trapped.c     | 3 ++-
 arch/sh/kernel/traps_32.c       | 9 +++++----
 3 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 81e0d668eef..d3ab269386b 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -199,7 +199,7 @@ do {							\
 #endif
 
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
-			    struct mem_access *ma);
+			    struct mem_access *ma, int);
 
 asmlinkage void do_address_error(struct pt_regs *regs,
 				 unsigned long writeaccess,
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index e27a19e1f46..69be603aa2d 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -284,7 +284,8 @@ int handle_trapped_io(struct pt_regs *regs, unsigned long address)
 		return 0;
 	}
 
-	tmp = handle_unaligned_access(instruction, regs, &trapped_io_access);
+	tmp = handle_unaligned_access(instruction, regs,
+				      &trapped_io_access, 1);
 	set_fs(oldfs);
 	return tmp == 0;
 }
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index c581dc31d92..583ace55b0d 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -449,7 +449,7 @@ static inline int handle_delayslot(struct pt_regs *regs,
 #define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4)
 
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
-			    struct mem_access *ma)
+			    struct mem_access *ma, int expected)
 {
 	u_int rm;
 	int ret, index;
@@ -458,7 +458,7 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 	rm = regs->regs[index];
 
 	/* shout about fixups */
-	if (printk_ratelimit())
+	if (!expected && printk_ratelimit())
 		printk(KERN_NOTICE "Fixing up unaligned %s access "
 		       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
 		       user_mode(regs) ? "userspace" : "kernel",
@@ -657,7 +657,7 @@ fixup:
 
 		set_fs(USER_DS);
 		tmp = handle_unaligned_access(instruction, regs,
-					      &user_mem_access);
+					      &user_mem_access, 0);
 		set_fs(oldfs);
 
 		if (tmp==0)
@@ -694,7 +694,8 @@ uspace_segv:
 			die("insn faulting in do_address_error", regs, 0);
 		}
 
-		handle_unaligned_access(instruction, regs, &user_mem_access);
+		handle_unaligned_access(instruction, regs,
+					&user_mem_access, 0);
 		set_fs(oldfs);
 	}
 }
-- 
cgit v1.2.3


From 47d25003cbd9e9030a95f7ccc4e70fec6aa7b844 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Fri, 28 Aug 2009 14:11:57 +0100
Subject: x86: Fix earlyprintk=dbgp for machines without NX

Since parse_early_param() may (e.g. for earlyprintk=dbgp)
involve calls to page table manipulation functions (here
set_fixmap_nocache()), NX hardware support must be determined
before calling that function (so that __supported_pte_mask gets
properly set up).

But the call after parse_early_param() can also not go away, as
that will honor eventual command line specified disabling of
the NX functionality.

( This will then just result in whatever mappings got
  established during parse_early_param() having the NX bit set
  despite it being disabled on the command line, but I think
  that's tolerable).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <4A97F3BD02000078000121B9@vpn.id2.novell.com>
[ merged to x86/pat to resolve a conflict. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 02643cc3bf2..eb1f1e6e52b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -714,6 +714,16 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
+#ifdef CONFIG_X86_64
+	/*
+	 * Must call this twice: Once just to detect whether hardware doesn't
+	 * support NX (so that the early EHCI debug console setup can safely
+	 * call set_fixmap(), and then again after parsing early parameters to
+	 * honor the respective command line option.
+	 */
+	check_efer();
+#endif
+
 	parse_early_param();
 
 	/* VMI may relocate the fixmap; do this before touching ioremap area */
-- 
cgit v1.2.3


From ad283ea4a3ce82cda2efe33163748a397b31b1eb Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Sat, 29 Aug 2009 19:09:26 -0700
Subject: async_tx: add sum check flags

Replace the flat zero_sum_result with a collection of flags to contain
the P (xor) zero-sum result, and the soon to be utilized Q (raid6 reed
solomon syndrome) zero-sum result.  Use the SUM_CHECK_ namespace instead
of DMA_ since these flags will be used on non-dma-zero-sum enabled
platforms.

Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop3xx-adma.h |  5 +++--
 arch/arm/mach-iop13xx/include/mach/adma.h   | 12 +++++++-----
 2 files changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index 83e6ba338e2..26eefea0231 100644
--- a/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -756,13 +756,14 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
 	hw_desc->src[0] = val;
 }
 
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
 {
 	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
 	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
 
 	iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
-	return desc_ctrl.zero_result_err;
+	return desc_ctrl.zero_result_err << SUM_CHECK_P;
 }
 
 static inline void iop_chan_append(struct iop_adma_chan *chan)
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
index 5722e86f217..1cd31df8924 100644
--- a/arch/arm/mach-iop13xx/include/mach/adma.h
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -428,18 +428,20 @@ static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
 	hw_desc->block_fill_data = val;
 }
 
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
 {
 	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
 	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
 	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+	enum sum_check_flags flags;
 
 	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
 
-	if (desc_ctrl.pq_xfer_en)
-		return byte_count.zero_result_err_q;
-	else
-		return byte_count.zero_result_err;
+	flags = byte_count.zero_result_err_q << SUM_CHECK_Q;
+	flags |= byte_count.zero_result_err << SUM_CHECK_P;
+
+	return flags;
 }
 
 static inline void iop_chan_append(struct iop_adma_chan *chan)
-- 
cgit v1.2.3


From b2f46fd8ef3dff2ab30f31126833f78b7480283a Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 14 Jul 2009 12:20:36 -0700
Subject: async_tx: add support for asynchronous GF multiplication

[ Based on an original patch by Yuri Tikhonov ]

This adds support for doing asynchronous GF multiplication by adding
two additional functions to the async_tx API:

 async_gen_syndrome() does simultaneous XOR and Galois field
    multiplication of sources.

 async_syndrome_val() validates the given source buffers against known P
    and Q values.

When a request is made to run async_pq against more than the hardware
maximum number of supported sources we need to reuse the previous
generated P and Q values as sources into the next operation.  Care must
be taken to remove Q from P' and P from Q'.  For example to perform a 5
source pq op with hardware that only supports 4 sources at a time the
following approach is taken:

p, q = PQ(src0, src1, src2, src3, COEF({01}, {02}, {04}, {08}))
p', q' = PQ(p, q, q, src4, COEF({00}, {01}, {00}, {10}))

p' = p + q + q + src4 = p + src4
q' = {00}*p + {01}*q + {00}*q + {10}*src4 = q + {10}*src4

Note: 4 is the minimum acceptable maxpq otherwise we punt to
synchronous-software path.

The DMA_PREP_CONTINUE flag indicates to the driver to reuse p and q as
sources (in the above manner) and fill the remaining slots up to maxpq
with the new sources/coefficients.

Note1: Some devices have native support for P+Q continuation and can skip
this extra work.  Devices with this capability can advertise it with
dma_set_maxpq.  It is up to each driver how to handle the
DMA_PREP_CONTINUE flag.

Note2: The api supports disabling the generation of P when generating Q,
this is ignored by the synchronous path but is implemented by some dma
devices to save unnecessary writes.  In this case the continuation
algorithm is simplified to only reuse Q as a source.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Reviewed-by: Andre Noll <maan@systemlinux.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-iop13xx/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 9800228b71d..2e7ca0d75f8 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -506,7 +506,7 @@ void __init iop13xx_platform_init(void)
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
+			dma_cap_set(DMA_PQ, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
 			break;
-- 
cgit v1.2.3


From 7bf649aee8ac93ecc280f8745dcf8ec19d7b9fb1 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Fri, 28 Aug 2009 14:32:04 -0700
Subject: iop-adma: P+Q support for iop13xx adma engines

iop33x support is not included because that engine is a bit more awkward
to handle in that it can either be in xor mode or pq mode.  The
dmaengine/async_tx layers currently only comprehend static capabilities.

Note iop13xx does not support hardware PQ continuation so the driver
must handle the DMA_PREP_CONTINUE flag for operations across > 16
sources. From the comment for dma_maxpq:

/* When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 */

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop3xx-adma.h |  76 ++++++++++++++++++++
 arch/arm/include/asm/hardware/iop_adma.h    |   1 +
 arch/arm/mach-iop13xx/include/mach/adma.h   | 107 ++++++++++++++++++++++++++++
 3 files changed, 184 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
index 26eefea0231..1a8c7279a28 100644
--- a/arch/arm/include/asm/hardware/iop3xx-adma.h
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -187,11 +187,74 @@ union iop3xx_desc {
 	void *ptr;
 };
 
+/* No support for p+q operations */
+static inline int
+iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+			 dma_addr_t addr, unsigned char coef)
+{
+	BUG();
+}
+
+static inline int
+iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	BUG();
+	return 0;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+			  unsigned long flags)
+{
+	BUG();
+}
+
+static inline void
+iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	BUG();
+}
+
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+			      dma_addr_t *src)
+{
+	BUG();
+}
+
 static inline int iop_adma_get_max_xor(void)
 {
 	return 32;
 }
 
+static inline int iop_adma_get_max_pq(void)
+{
+	BUG();
+	return 0;
+}
+
 static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
 {
 	int id = chan->device->id;
@@ -332,6 +395,11 @@ static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
 	return slot_cnt;
 }
 
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+	return 0;
+}
+
 static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
@@ -349,6 +417,14 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 	return 0;
 }
 
+
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+					  struct iop_adma_chan *chan)
+{
+	BUG();
+	return 0;
+}
+
 static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
index 385c6e8cbbd..bbe8a0475ca 100644
--- a/arch/arm/include/asm/hardware/iop_adma.h
+++ b/arch/arm/include/asm/hardware/iop_adma.h
@@ -106,6 +106,7 @@ struct iop_adma_desc_slot {
 	union {
 		u32 *xor_check_result;
 		u32 *crc32_result;
+		u32 *pq_check_result;
 	};
 };
 
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
index 1cd31df8924..6d3782d85a9 100644
--- a/arch/arm/mach-iop13xx/include/mach/adma.h
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -150,6 +150,8 @@ static inline int iop_adma_get_max_xor(void)
 	return 16;
 }
 
+#define iop_adma_get_max_pq iop_adma_get_max_xor
+
 static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
 {
 	return __raw_readl(ADMA_ADAR(chan));
@@ -211,7 +213,10 @@ iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
 #define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
 #define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
 #define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
 #define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+#define iop_chan_pq_slot_count iop_chan_xor_slot_count
+#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count
 
 static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
@@ -220,6 +225,13 @@ static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
 	return hw_desc->dest_addr;
 }
 
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+					  struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->q_dest_addr;
+}
+
 static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan)
 {
@@ -319,6 +331,58 @@ iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
 	return 1;
 }
 
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.pq_xfer_en = 1;
+	u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = hw_desc->desc_ctrl;
+	return u_desc_ctrl.field.pq_xfer_en;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+			  unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.zero_result = 1;
+	u_desc_ctrl.field.status_write_back_en = 1;
+	u_desc_ctrl.field.pq_xfer_en = 1;
+	u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
 static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan,
 					u32 byte_count)
@@ -351,6 +415,7 @@ iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
 	}
 }
 
+#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count
 
 static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
 					struct iop_adma_chan *chan,
@@ -361,6 +426,16 @@ static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
 	hw_desc->upper_dest_addr = 0;
 }
 
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+
+	hw_desc->dest_addr = addr[0];
+	hw_desc->q_dest_addr = addr[1];
+	hw_desc->upper_dest_addr = 0;
+}
+
 static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
 					dma_addr_t addr)
 {
@@ -388,6 +463,29 @@ static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
 	} while (slot_cnt);
 }
 
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+			 dma_addr_t addr, unsigned char coef)
+{
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	struct iop13xx_adma_src *src;
+	int i = 0;
+
+	do {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		src = &iter->src[src_idx];
+		src->src_addr = addr;
+		src->pq_upper_src_addr = 0;
+		src->pq_dmlt = coef;
+		slot_cnt -= slots_per_op;
+		if (slot_cnt) {
+			i += slots_per_op;
+			addr += IOP_ADMA_PQ_MAX_BYTE_COUNT;
+		}
+	} while (slot_cnt);
+}
+
 static inline void
 iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
 	struct iop_adma_chan *chan)
@@ -399,6 +497,15 @@ iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
 }
 
 #define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+			      dma_addr_t *src)
+{
+	iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]);
+	iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]);
+}
 
 static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
 					u32 next_desc_addr)
-- 
cgit v1.2.3


From d8aa899bb27ad7879ab9e621365e04ada2745a65 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Sun, 30 Aug 2009 12:26:32 +0800
Subject: score: remove unused code, add include files in .c

---
 arch/score/include/asm/elf.h      | 18 +++++++++++-------
 arch/score/include/asm/irqflags.h |  2 --
 arch/score/kernel/signal.c        |  4 ++--
 arch/score/mm/init.c              |  4 +++-
 arch/score/mm/pgtable.c           | 10 +---------
 5 files changed, 17 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/elf.h b/arch/score/include/asm/elf.h
index 832436375ac..43526d9fda9 100644
--- a/arch/score/include/asm/elf.h
+++ b/arch/score/include/asm/elf.h
@@ -1,9 +1,8 @@
 #ifndef _ASM_SCORE_ELF_H
 #define _ASM_SCORE_ELF_H
 
-/* ELF register definitions */
-#define ELF_NGREG	45
-#define ELF_NFPREG	33
+#include <linux/ptrace.h>
+
 #define EM_SCORE7	135
 
 /* Relocation types. */
@@ -30,11 +29,15 @@
 #define R_SCORE_IMM30		20
 #define R_SCORE_IMM32		21
 
-typedef unsigned long elf_greg_t;
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+/* ELF register definitions */
+typedef unsigned long	elf_greg_t;
+
+#define ELF_NGREG	(sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t	elf_gregset_t[ELF_NGREG];
 
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+/* Score does not have fp regs. */
+typedef double		elf_fpreg_t;
+typedef elf_fpreg_t	elf_fpregset_t;
 
 #define elf_check_arch(x)	((x)->e_machine == EM_SCORE7)
 
@@ -57,6 +60,7 @@ do {								\
 struct task_struct;
 struct pt_regs;
 
+#define CORE_DUMP_USE_REGSET
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE	PAGE_SIZE
 
diff --git a/arch/score/include/asm/irqflags.h b/arch/score/include/asm/irqflags.h
index 92eeb33dd72..690a6cae729 100644
--- a/arch/score/include/asm/irqflags.h
+++ b/arch/score/include/asm/irqflags.h
@@ -17,8 +17,6 @@
 		"nop;"				\
 		"nop;"				\
 		"nop;"				\
-		"ldi	r9, 0x1;"		\
-		"and	%0, %0, r9;"		\
 		: "=r" (x)			\
 		:				\
 		: "r8", "r9"			\
diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c
index 950f87c4a16..aa57440e497 100644
--- a/arch/score/kernel/signal.c
+++ b/arch/score/kernel/signal.c
@@ -25,14 +25,14 @@
 
 #include <linux/errno.h>
 #include <linux/signal.h>
+#include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/uaccess.h>
 
+#include <asm/cacheflush.h>
 #include <asm/syscalls.h>
 #include <asm/ucontext.h>
 
-#include <asm/cacheflush.h>
-
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
 struct rt_sigframe {
diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c
index d496e9f1a60..4e3dcd0c471 100644
--- a/arch/score/mm/init.c
+++ b/arch/score/mm/init.c
@@ -144,7 +144,8 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 void __init_refok free_initmem(void)
 {
 	free_init_pages("unused kernel memory",
-	    (unsigned long)__init_begin, (unsigned long)__init_end);
+	__pa(&__init_begin),
+	__pa(&__init_end));
 }
 
 unsigned long pgd_current;
@@ -156,4 +157,5 @@ unsigned long pgd_current;
  * are constants.  So we use the variants from asm-offset.h until that gcc
  * will officially be retired.
  */
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned(PTE_ORDER);
 pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
diff --git a/arch/score/mm/pgtable.c b/arch/score/mm/pgtable.c
index 10b0962f83d..6408bb73d3c 100644
--- a/arch/score/mm/pgtable.c
+++ b/arch/score/mm/pgtable.c
@@ -47,14 +47,6 @@ void pgd_init(unsigned long page)
 
 void __init pagetable_init(void)
 {
-	unsigned long vaddr;
-	pgd_t *pgd_base;
-
 	/* Initialize the entire pgd. */
-	pgd_init((unsigned long) swapper_pg_dir);
-	pgd_init((unsigned long) swapper_pg_dir
-		+ sizeof(pgd_t) * USER_PTRS_PER_PGD);
-
-	pgd_base = swapper_pg_dir;
-	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
+	pgd_init((unsigned long)swapper_pg_dir);
 }
-- 
cgit v1.2.3


From ffa818b4b099f65b6cb74750bdb979061716e020 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Sun, 30 Aug 2009 12:30:16 +0800
Subject: score: update inconsistent declare after .c was changed

---
 arch/score/include/asm/irq.h      |   2 +
 arch/score/include/asm/irq_regs.h |   7 +-
 arch/score/include/asm/linkage.h  |   3 +
 arch/score/include/asm/page.h     |   4 +-
 arch/score/include/asm/pgalloc.h  |   2 +-
 arch/score/include/asm/pgtable.h  |  31 ++-
 arch/score/include/asm/ptrace.h   |   8 +-
 arch/score/include/asm/uaccess.h  | 433 ++++++++++++++++++++++++++++++++++++--
 arch/score/include/asm/user.h     |  17 ++
 9 files changed, 472 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/irq.h b/arch/score/include/asm/irq.h
index 6edd2a2adef..c883f3df33f 100644
--- a/arch/score/include/asm/irq.h
+++ b/arch/score/include/asm/irq.h
@@ -20,4 +20,6 @@
 
 #define IRQ_TIMER (7)		/* Timer IRQ number of SPCT6600 */
 
+extern void interrupt_exception_vector(void);
+
 #endif /* _ASM_SCORE_IRQ_H */
diff --git a/arch/score/include/asm/irq_regs.h b/arch/score/include/asm/irq_regs.h
index 905b7b078ba..b8e881c9a69 100644
--- a/arch/score/include/asm/irq_regs.h
+++ b/arch/score/include/asm/irq_regs.h
@@ -1,6 +1,11 @@
 #ifndef _ASM_SCORE_IRQ_REGS_H
 #define _ASM_SCORE_IRQ_REGS_H
 
-#include <asm-generic/irq_regs.h>
+#include <linux/thread_info.h>
+
+static inline struct pt_regs *get_irq_regs(void)
+{
+	return current_thread_info()->regs;
+}
 
 #endif /* _ASM_SCORE_IRQ_REGS_H */
diff --git a/arch/score/include/asm/linkage.h b/arch/score/include/asm/linkage.h
index 2580fbbfe94..2323a8ecf44 100644
--- a/arch/score/include/asm/linkage.h
+++ b/arch/score/include/asm/linkage.h
@@ -1,4 +1,7 @@
 #ifndef _ASM_SCORE_LINKAGE_H
 #define _ASM_SCORE_LINKAGE_H
 
+#define __ALIGN .align 2
+#define __ALIGN_STR ".align 2"
+
 #endif /* _ASM_SCORE_LINKAGE_H */
diff --git a/arch/score/include/asm/page.h b/arch/score/include/asm/page.h
index 67e98206be6..ee5821042fc 100644
--- a/arch/score/include/asm/page.h
+++ b/arch/score/include/asm/page.h
@@ -57,8 +57,8 @@ extern unsigned long max_low_pfn;
 extern unsigned long min_low_pfn;
 extern unsigned long max_pfn;
 
-#define __pa(vaddr)		((unsigned long) (vaddr))
-#define __va(paddr)		((void *) (paddr))
+#define __pa(x)		((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)		((void *)((unsigned long) (x) + PAGE_OFFSET))
 
 #define phys_to_pfn(phys)	(PFN_DOWN(phys))
 #define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
diff --git a/arch/score/include/asm/pgalloc.h b/arch/score/include/asm/pgalloc.h
index 28dacc1cbba..059a61b7071 100644
--- a/arch/score/include/asm/pgalloc.h
+++ b/arch/score/include/asm/pgalloc.h
@@ -72,7 +72,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_pages(pte, PTE_ORDER);
 }
 
-#define __pte_free_tlb(tlb, pte)			\
+#define __pte_free_tlb(tlb, pte, buf)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h
index 5e913e57c67..674934b4017 100644
--- a/arch/score/include/asm/pgtable.h
+++ b/arch/score/include/asm/pgtable.h
@@ -106,7 +106,8 @@ static inline void pmd_clear(pmd_t *pmdp)
 	((swp_entry_t) { pte_val(pte)})
 #define __swp_entry_to_pte(x)	((pte_t) {(x).val})
 
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_phys(pmd)		__pa((void *)pmd_val(pmd))
+#define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
@@ -129,14 +130,11 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #define pgd_clear(pgdp)		do { } while (0)
 
 #define kern_addr_valid(addr)	(1)
-#define	pmd_offset(a, b)	((void *) 0)
 #define pmd_page_vaddr(pmd)	pmd_val(pmd)
 
 #define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
 #define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
 
-#define pud_offset(pgd, address) ((pud_t *) pgd)
-
 #define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_CACHE)
 #define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
 				_PAGE_CACHE)
@@ -165,15 +163,27 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #define __S110	PAGE_SHARED
 #define __S111	PAGE_SHARED
 
-#define pgprot_noncached(x)	(x)
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+	unsigned long prot = pgprot_val(_prot);
+
+	prot = (prot & ~_CACHE_MASK);
+
+	return __pgprot(prot);
+}
 
-#define __swp_type(x)		(0)
-#define __swp_offset(x)		(0)
-#define __swp_entry(typ, off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __swp_type(x)		((x).val & 0x1f)
+#define __swp_offset(x) 	((x).val >> 11)
+#define __swp_entry(type, offset) ((swp_entry_t){(type) | ((offset) << 11)})
 
-#define ZERO_PAGE(vaddr)	({ BUG(); NULL; })
+extern unsigned long empty_zero_page;
+extern unsigned long zero_page_mask;
 
-#define swapper_pg_dir ((pgd_t *) NULL)
+#define ZERO_PAGE(vaddr) \
+	(virt_to_page((void *)(empty_zero_page + \
+	 (((unsigned long)(vaddr)) & zero_page_mask))))
 
 #define pgtable_cache_init()	do {} while (0)
 
@@ -248,6 +258,7 @@ static inline pte_t pte_mkyoung(pte_t pte)
 #define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
 
 extern unsigned long pgd_current;
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern void paging_init(void);
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
diff --git a/arch/score/include/asm/ptrace.h b/arch/score/include/asm/ptrace.h
index 66b14c8891c..d40e691f23e 100644
--- a/arch/score/include/asm/ptrace.h
+++ b/arch/score/include/asm/ptrace.h
@@ -51,9 +51,11 @@
  * system call/exception. As usual the registers k0/k1 aren't being saved.
  */
 struct pt_regs {
-	unsigned long pad0[6];
+	unsigned long pad0[6];	/* stack arguments */
 	unsigned long orig_r4;
 	unsigned long orig_r7;
+	long is_syscall;
+
 	unsigned long regs[32];
 
 	unsigned long cel;
@@ -68,12 +70,12 @@ struct pt_regs {
 	unsigned long cp0_psr;
 	unsigned long cp0_ecr;
 	unsigned long cp0_condition;
-
-	long is_syscall;
 };
 
 #ifdef __KERNEL__
 
+struct task_struct;
+
 /*
  * Does the process account for user or for system time?
  */
diff --git a/arch/score/include/asm/uaccess.h b/arch/score/include/asm/uaccess.h
index 6f09e2b7ddb..ab66ddde777 100644
--- a/arch/score/include/asm/uaccess.h
+++ b/arch/score/include/asm/uaccess.h
@@ -1,27 +1,424 @@
-#ifndef _ASM_SCORE_UACCESS_H
-#define _ASM_SCORE_UACCESS_H
+#ifndef __SCORE_UACCESS_H
+#define __SCORE_UACCESS_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+
+#define VERIFY_READ		0
+#define VERIFY_WRITE		1
+
+#define get_ds()		(KERNEL_DS)
+#define get_fs()		(current_thread_info()->addr_limit)
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
 /*
- * Copyright (C) 2006 Atmark Techno, Inc.
+ * Is a address valid? This does a straighforward calculation rather
+ * than tests.
+ *
+ * Address valid if:
+ *  - "addr" doesn't have any high-bits set
+ *  - AND "size" doesn't have any high-bits set
+ *  - AND "addr+size" doesn't have any high-bits set
+ *  - OR we are in kernel mode.
  *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
+ * __ua_size() is a trick to avoid runtime checking of positive constant
+ * sizes; for those we already know at compile time that the size is ok.
  */
-struct pt_regs;
-extern int fixup_exception(struct pt_regs *regs);
+#define __ua_size(size)							\
+	((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size))
+
+/*
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+
+#define __access_ok(addr, size)					\
+	(((long)((get_fs().seg) &				\
+		 ((addr) | ((addr) + (size)) |			\
+		  __ua_size(size)))) == 0)
+
+#define access_ok(type, addr, size)				\
+	likely(__access_ok((unsigned long)(addr), (size)))
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+extern void __get_user_unknown(void);
+
+#define __get_user_common(val, size, ptr)				\
+do {									\
+	switch (size) {							\
+	case 1:								\
+		__get_user_asm(val, "lb", ptr);				\
+		break;							\
+	case 2:								\
+		__get_user_asm(val, "lh", ptr);				\
+		 break;							\
+	case 4:								\
+		__get_user_asm(val, "lw", ptr);				\
+		 break;							\
+	case 8: 							\
+		if ((copy_from_user((void *)&val, ptr, 8)) == 0)	\
+			__gu_err = 0;					\
+		else							\
+			__gu_err = -EFAULT;				\
+		break;							\
+	default:							\
+		__get_user_unknown();					\
+		break;							\
+	}								\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	long __gu_err = 0;						\
+	__get_user_common((x), size, ptr);				\
+	__gu_err;							\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);		\
+									\
+	if (likely(access_ok(VERIFY_READ, __gu_ptr, size)))		\
+		__get_user_common((x), size, __gu_ptr);			\
+									\
+	__gu_err;							\
+})
+
+#define __get_user_asm(val, insn, addr)					\
+{									\
+	long __gu_tmp;							\
+									\
+	__asm__ __volatile__(						\
+		"1:" insn " %1, %3\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"3:li	%0, %4\n"					\
+		"j	2b\n"						\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		".word	1b, 3b\n"					\
+		".previous\n"						\
+		: "=r" (__gu_err), "=r" (__gu_tmp)			\
+		: "0" (0), "o" (__m(addr)), "i" (-EFAULT));		\
+									\
+		(val) = (__typeof__(*(addr))) __gu_tmp;			\
+}
+
+/*
+ * Yuck.  We need two variants, one for 64bit operation and one
+ * for 32 bit mode and old iron.
+ */
+#define __put_user_nocheck(val, ptr, size)				\
+({									\
+	__typeof__(*(ptr)) __pu_val;					\
+	long __pu_err = 0;						\
+									\
+	__pu_val = (val);						\
+	switch (size) {							\
+	case 1:								\
+		__put_user_asm("sb", ptr);				\
+		break;							\
+	case 2:								\
+		__put_user_asm("sh", ptr);				\
+		break;							\
+	case 4:								\
+		__put_user_asm("sw", ptr);				\
+		break;							\
+	case 8: 							\
+		if ((__copy_to_user((void *)ptr, &__pu_val, 8)) == 0)	\
+			__pu_err = 0;					\
+		else							\
+			__pu_err = -EFAULT;				\
+		break;							\
+	default:							\
+		 __put_user_unknown();					\
+		 break;							\
+	}								\
+	__pu_err;							\
+})
+
+
+#define __put_user_check(val, ptr, size)				\
+({									\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	__typeof__(*(ptr)) __pu_val = (val);				\
+	long __pu_err = -EFAULT;					\
+									\
+	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) {		\
+		switch (size) {						\
+		case 1:							\
+			__put_user_asm("sb", __pu_addr);		\
+			break;						\
+		case 2:							\
+			__put_user_asm("sh", __pu_addr);		\
+			break;						\
+		case 4:							\
+			__put_user_asm("sw", __pu_addr);		\
+			break;						\
+		case 8: 						\
+			if ((__copy_to_user((void *)__pu_addr, &__pu_val, 8)) == 0)\
+				__pu_err = 0;				\
+			else						\
+				__pu_err = -EFAULT;			\
+			break;						\
+		default:						\
+			__put_user_unknown();				\
+			break;						\
+		}							\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(insn, ptr)					\
+	__asm__ __volatile__(						\
+		"1:" insn " %2, %3\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"3:li %0, %4\n"						\
+		"j 2b\n"						\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		".word 1b, 3b\n"					\
+		".previous\n"						\
+		: "=r" (__pu_err)					\
+		: "0" (0), "r" (__pu_val), "o" (__m(ptr)),		\
+		  "i" (-EFAULT));
+
+extern void __put_user_unknown(void);
+extern int __copy_tofrom_user(void *to, const void *from, unsigned long len);
+
+static inline unsigned long
+copy_from_user(void *to, const void *from, unsigned long len)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_READ, from, len))
+		return __copy_tofrom_user(to, from, len);
+
+	if ((unsigned long)from < TASK_SIZE) {
+		over = (unsigned long)from + len - TASK_SIZE;
+		return __copy_tofrom_user(to, from, len - over) + over;
+	}
+	return len;
+}
+
+static inline unsigned long
+copy_to_user(void *to, const void *from, unsigned long len)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_WRITE, to, len))
+		return __copy_tofrom_user(to, from, len);
+
+	if ((unsigned long)to < TASK_SIZE) {
+		over = (unsigned long)to + len - TASK_SIZE;
+		return __copy_tofrom_user(to, from, len - over) + over;
+	}
+	return len;
+}
 
-#ifndef __ASSEMBLY__
+#define __copy_from_user(to, from, len)	\
+		__copy_tofrom_user((to), (from), (len))
 
-#define __range_ok(addr, size)					\
-	((((unsigned long __force)(addr) >= 0x80000000)			\
-	|| ((unsigned long)(size) > 0x80000000)			\
-	|| (((unsigned long __force)(addr) + (unsigned long)(size)) > 0x80000000)))
+#define __copy_to_user(to, from, len)		\
+		__copy_tofrom_user((to), (from), (len))
 
-#define __access_ok(addr, size) \
-	(__range_ok((addr), (size)) == 0)
+static inline unsigned long
+__copy_to_user_inatomic(void *to, const void *from, unsigned long len)
+{
+	return __copy_to_user(to, from, len);
+}
 
-#include <asm-generic/uaccess.h>
+static inline unsigned long
+__copy_from_user_inatomic(void *to, const void *from, unsigned long len)
+{
+	return __copy_from_user(to, from, len);
+}
+
+#define __copy_in_user(to, from, len)	__copy_from_user(to, from, len)
+
+static inline unsigned long
+copy_in_user(void *to, const void *from, unsigned long len)
+{
+	if (access_ok(VERIFY_READ, from, len) &&
+		      access_ok(VERFITY_WRITE, to, len))
+		return copy_from_user(to, from, len);
+}
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern unsigned long __clear_user(void __user *src, unsigned long size);
+
+static inline unsigned long clear_user(char *src, unsigned long size)
+{
+	if (access_ok(VERIFY_WRITE, src, size))
+		return __clear_user(src, size);
+
+	return -EFAULT;
+}
+/*
+ * __strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+extern int __strncpy_from_user(char *dst, const char *src, long len);
+
+static inline int strncpy_from_user(char *dst, const char *src, long len)
+{
+	if (access_ok(VERIFY_READ, src, 1))
+		return __strncpy_from_user(dst, src, len);
+
+	return -EFAULT;
+}
+
+extern int __strlen_user(const char *src);
+static inline long strlen_user(const char __user *src)
+{
+	return __strlen_user(src);
+}
+
+extern int __strnlen_user(const char *str, long len);
+static inline long strnlen_user(const char __user *str, long len)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else		
+		return __strnlen_user(str, len);
+}
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __SCORE_UACCESS_H */
 
-#endif /* _ASM_SCORE_UACCESS_H */
diff --git a/arch/score/include/asm/user.h b/arch/score/include/asm/user.h
index 3cf75720fe0..7bfb8e2c805 100644
--- a/arch/score/include/asm/user.h
+++ b/arch/score/include/asm/user.h
@@ -1,4 +1,21 @@
 #ifndef _ASM_SCORE_USER_H
 #define _ASM_SCORE_USER_H
 
+struct user_regs_struct {
+	unsigned long regs[32];
+
+	unsigned long cel;
+	unsigned long ceh;
+
+	unsigned long sr0;	/* cnt */
+	unsigned long sr1;	/* lcr */
+	unsigned long sr2;	/* scr */
+
+	unsigned long cp0_epc;
+	unsigned long cp0_ema;
+	unsigned long cp0_psr;
+	unsigned long cp0_ecr;
+	unsigned long cp0_condition;
+};
+
 #endif /* _ASM_SCORE_USER_H */
-- 
cgit v1.2.3


From 324f40fbb02ed9339ddbdc450ff8ba614a92a630 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Sun, 30 Aug 2009 12:31:58 +0800
Subject: score: add MEMORY_START and MEMORY_SIZE define, to make the code
 clear

---
 arch/score/include/asm/setup.h |  3 ++-
 arch/score/kernel/setup.c      | 32 +++++++++++++++++---------------
 2 files changed, 19 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/setup.h b/arch/score/include/asm/setup.h
index de89eff98da..3cb944dc68d 100644
--- a/arch/score/include/asm/setup.h
+++ b/arch/score/include/asm/setup.h
@@ -2,7 +2,8 @@
 #define _ASM_SCORE_SETUP_H
 
 #define COMMAND_LINE_SIZE	256
-#define MEM_SIZE		0x2000000
+#define MEMORY_START		0
+#define MEMORY_SIZE		0x2000000
 
 #ifdef __KERNEL__
 
diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c
index a172ce170f6..6a2503c75c4 100644
--- a/arch/score/kernel/setup.c
+++ b/arch/score/kernel/setup.c
@@ -26,10 +26,12 @@
 #include <linux/bootmem.h>
 #include <linux/initrd.h>
 #include <linux/ioport.h>
+#include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
 
 #include <asm-generic/sections.h>
+#include <asm/setup.h>
 
 struct screen_info screen_info;
 unsigned long kernelsp;
@@ -40,25 +42,25 @@ static struct resource data_resource = { .name = "Kernel data",};
 
 static void __init bootmem_init(void)
 {
-	unsigned long reserved_end, bootmap_size;
+	unsigned long start_pfn, bootmap_size;
 	unsigned long size = initrd_end - initrd_start;
 
-	reserved_end = (unsigned long)_end;
+	start_pfn = PFN_UP(__pa(&_end));
 
-	min_low_pfn = 0;
-	max_low_pfn = MEM_SIZE / PAGE_SIZE;
+	min_low_pfn = PFN_UP(MEMORY_START);
+	max_low_pfn = PFN_UP(MEMORY_START + MEMORY_SIZE);
 
 	/* Initialize the boot-time allocator with low memory only. */
-	bootmap_size = init_bootmem_node(NODE_DATA(0), reserved_end,
+	bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
 					 min_low_pfn, max_low_pfn);
 	add_active_range(0, min_low_pfn, max_low_pfn);
 
-	free_bootmem(PFN_PHYS(reserved_end),
-		     (max_low_pfn - reserved_end) << PAGE_SHIFT);
-	memory_present(0, reserved_end, max_low_pfn);
+	free_bootmem(PFN_PHYS(start_pfn),
+		     (max_low_pfn - start_pfn) << PAGE_SHIFT);
+	memory_present(0, start_pfn, max_low_pfn);
 
 	/* Reserve space for the bootmem bitmap. */
-	reserve_bootmem(PFN_PHYS(reserved_end), bootmap_size, BOOTMEM_DEFAULT);
+	reserve_bootmem(PFN_PHYS(start_pfn), bootmap_size, BOOTMEM_DEFAULT);
 
 	if (size == 0) {
 		printk(KERN_INFO "Initrd not found or empty");
@@ -87,15 +89,15 @@ static void __init resource_init(void)
 {
 	struct resource *res;
 
-	code_resource.start = (unsigned long)_text;
-	code_resource.end = (unsigned long)_etext - 1;
-	data_resource.start = (unsigned long)_etext;
-	data_resource.end = (unsigned long)_edata - 1;
+	code_resource.start = __pa(&_text);
+	code_resource.end = __pa(&_etext) - 1;
+	data_resource.start = __pa(&_etext);
+	data_resource.end = __pa(&_edata) - 1;
 
 	res = alloc_bootmem(sizeof(struct resource));
 	res->name = "System RAM";
-	res->start = 0;
-	res->end = MEM_SIZE - 1;
+	res->start = MEMORY_START;
+	res->end = MEMORY_START + MEMORY_SIZE - 1;
 	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	request_resource(&iomem_resource, res);
 
-- 
cgit v1.2.3


From cf52c468352993ca420fe0b4ada976dc1f614026 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Sun, 30 Aug 2009 12:33:30 +0800
Subject: score: add old syscall support

---
 arch/score/include/asm/unistd.h |  5 +++++
 arch/score/kernel/entry.S       | 13 +++++++++++++
 arch/score/kernel/sys_score.c   | 24 ++++++++++++++++++++++--
 3 files changed, 40 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/unistd.h b/arch/score/include/asm/unistd.h
index 0d98b72f462..4aa957364d4 100644
--- a/arch/score/include/asm/unistd.h
+++ b/arch/score/include/asm/unistd.h
@@ -3,6 +3,11 @@
 
 #define __ARCH_HAVE_MMU
 
+#define __ARCH_WANT_SYSCALL_NO_AT
+#define __ARCH_WANT_SYSCALL_NO_FLAGS
+#define __ARCH_WANT_SYSCALL_OFF_T
+#define __ARCH_WANT_SYSCALL_DEPRECATED
+
 #include <asm-generic/unistd.h>
 
 #endif /* _ASM_SCORE_UNISTD_H */
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
index 10e859ddefd..577abba3fac 100644
--- a/arch/score/kernel/entry.S
+++ b/arch/score/kernel/entry.S
@@ -499,3 +499,16 @@ ENTRY(sys_sigaltstack)
 	mv	r4, r0
 	la	r8, score_sigaltstack
 	br	r8
+
+#ifdef __ARCH_WANT_SYSCALL_DEPRECATED
+ENTRY(sys_fork)
+	mv	r4, r0
+	la	r8, score_fork
+	br	r8
+
+ENTRY(sys_vfork)
+	mv	r4, r0
+	la	r8, score_vfork
+	br	r8
+#endif /* __ARCH_WANT_SYSCALL_DEPRECATED */
+
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 61aff8a9344..00124946986 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -25,6 +25,7 @@
 
 #include <linux/file.h>
 #include <linux/fs.h>
+#include <linux/mm.h>
 #include <linux/mman.h>
 #include <linux/module.h>
 #include <linux/unistd.h>
@@ -49,8 +50,7 @@ sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
 	}
 
 	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags,
-			pgoff >> (PAGE_SHIFT - 12));
+	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
 	up_write(&current->mm->mmap_sem);
 
 	if (file)
@@ -59,6 +59,19 @@ sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
 	return error;
 }
 
+asmlinkage long
+sys_mmap(unsigned long addr, unsigned long len, unsigned long prot,
+	unsigned long flags, unsigned long fd, off_t pgoff)
+{
+	return sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
+}
+
+asmlinkage long
+score_fork(struct pt_regs *regs)
+{
+	return do_fork(SIGCHLD, regs->regs[0], regs, 0, NULL, NULL);
+}
+
 /*
  * Clone a task - this clones the calling program thread.
  * This is called indirectly via a small wrapper
@@ -81,6 +94,13 @@ score_clone(struct pt_regs *regs)
 			parent_tidptr, child_tidptr);
 }
 
+asmlinkage long
+score_vfork(struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
+			regs->regs[0], regs, 0, NULL, NULL);
+}
+
 /*
  * sys_execve() executes a new program.
  * This is called indirectly via a small wrapper
-- 
cgit v1.2.3


From 798983b2d5f9985655ca22a7a8c504b821e3f4e0 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Sun, 30 Aug 2009 12:34:08 +0800
Subject: score: update files according to review comments.

---
 arch/score/kernel/ptrace.c | 212 +++++++++++++++++++++------------------------
 1 file changed, 97 insertions(+), 115 deletions(-)

(limited to 'arch')

diff --git a/arch/score/kernel/ptrace.c b/arch/score/kernel/ptrace.c
index 1db876b1147..174c6422b09 100644
--- a/arch/score/kernel/ptrace.c
+++ b/arch/score/kernel/ptrace.c
@@ -23,11 +23,100 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/elf.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/ptrace.h>
+#include <linux/regset.h>
 
 #include <asm/uaccess.h>
 
+/*
+ * retrieve the contents of SCORE userspace general registers
+ */
+static int genregs_get(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       void *kbuf, void __user *ubuf)
+{
+	const struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* skip 9 * sizeof(unsigned long) not use for pt_regs */
+	ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+					0, offsetof(struct pt_regs, regs));
+
+	/* r0 - r31, cel, ceh, sr0, sr1, sr2, epc, ema, psr, ecr, condition */
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  regs->regs,
+				  offsetof(struct pt_regs, regs),
+				  offsetof(struct pt_regs, cp0_condition));
+
+	if (!ret)
+		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+/*
+ * update the contents of the SCORE userspace general registers
+ */
+static int genregs_set(struct task_struct *target,
+		       const struct user_regset *regset,
+		       unsigned int pos, unsigned int count,
+		       const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs *regs = task_pt_regs(target);
+	int ret;
+
+	/* skip 9 * sizeof(unsigned long) */
+	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					0, offsetof(struct pt_regs, regs));
+
+	/* r0 - r31, cel, ceh, sr0, sr1, sr2, epc, ema, psr, ecr, condition */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				  regs->regs,
+				  offsetof(struct pt_regs, regs),
+				  offsetof(struct pt_regs, cp0_condition));
+
+	if (!ret)
+		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+						sizeof(struct pt_regs), -1);
+
+	return ret;
+}
+
+/*
+ * Define the register sets available on the score7 under Linux
+ */
+enum score7_regset {
+	REGSET_GENERAL,
+};
+
+static const struct user_regset score7_regsets[] = {
+	[REGSET_GENERAL] = {
+		.core_note_type	= NT_PRSTATUS,
+		.n		= ELF_NGREG,
+		.size		= sizeof(long),
+		.align		= sizeof(long),
+		.get		= genregs_get,
+		.set		= genregs_set,
+	},
+};
+
+static const struct user_regset_view user_score_native_view = {
+	.name		= "score7",
+	.e_machine	= EM_SCORE7,
+	.regsets	= score7_regsets,
+	.n		= ARRAY_SIZE(score7_regsets),
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_score_native_view;
+}
+
 static int is_16bitinsn(unsigned long insn)
 {
 	if ((insn & INSN32_MASK) == INSN32_MASK)
@@ -80,34 +169,6 @@ write_tsk_long(struct task_struct *child,
 	return copied != sizeof(val) ? -EIO : 0;
 }
 
-/*
- * Get all user integer registers.
- */
-static int ptrace_getregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs *regs = task_pt_regs(tsk);
-
-	return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0;
-}
-
-/*
- * Set all user integer registers.
- */
-static int ptrace_setregs(struct task_struct *tsk, void __user *uregs)
-{
-	struct pt_regs newregs;
-	int ret;
-
-	ret = -EFAULT;
-	if (copy_from_user(&newregs, uregs, sizeof(struct pt_regs)) == 0) {
-		struct pt_regs *regs = task_pt_regs(tsk);
-		*regs = newregs;
-		ret = 0;
-	}
-
-	return ret;
-}
-
 void user_enable_single_step(struct task_struct *child)
 {
 	/* far_epc is the target of branch */
@@ -270,97 +331,18 @@ arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	unsigned long __user *datap = (void __user *)data;
 
 	switch (request) {
-	/* Read the word at location addr in the USER area.  */
-	case PTRACE_PEEKUSR: {
-		struct pt_regs *regs;
-		unsigned long tmp;
-
-		regs = task_pt_regs(child);
-
-		tmp = 0;  /* Default return value. */
-		switch (addr) {
-		case 0 ... 31:
-			tmp = regs->regs[addr];
-			break;
-		case PC:
-			tmp = regs->cp0_epc;
-			break;
-		case ECR:
-			tmp = regs->cp0_ecr;
-			break;
-		case EMA:
-			tmp = regs->cp0_ema;
-			break;
-		case CEH:
-			tmp = regs->ceh;
-			break;
-		case CEL:
-			tmp = regs->cel;
-			break;
-		case CONDITION:
-			tmp = regs->cp0_condition;
-			break;
-		case PSR:
-			tmp = regs->cp0_psr;
-			break;
-		case COUNTER:
-			tmp = regs->sr0;
-			break;
-		case LDCR:
-			tmp = regs->sr1;
-			break;
-		case STCR:
-			tmp = regs->sr2;
-			break;
-		default:
-			tmp = 0;
-			return -EIO;
-		}
-
-		ret = put_user(tmp, (unsigned int __user *) datap);
-		return ret;
-	}
-
-	case PTRACE_POKEUSR: {
-		struct pt_regs *regs;
-		ret = 0;
-		regs = task_pt_regs(child);
-
-		switch (addr) {
-		case 0 ... 31:
-			regs->regs[addr] = data;
-			break;
-		case PC:
-			regs->cp0_epc = data;
-			break;
-		case CEH:
-			regs->ceh = data;
-			break;
-		case CEL:
-			regs->cel = data;
-			break;
-		case CONDITION:
-			regs->cp0_condition = data;
-			break;
-		case PSR:
-		case COUNTER:
-		case STCR:
-		case LDCR:
-			break; /* user can't write the reg */
-		default:
-			/* The rest are not allowed. */
-			ret = -EIO;
-			break;
-		}
-		break;
-	}
-
 	case PTRACE_GETREGS:
-		ret = ptrace_getregs(child, (void __user *)datap);
+		ret = copy_regset_to_user(child, &user_score_native_view,
+						REGSET_GENERAL,
+						0, sizeof(struct pt_regs),
+						(void __user *)datap);
 		break;
 
 	case PTRACE_SETREGS:
-		ret = ptrace_setregs(child, (void __user *)datap);
+		ret = copy_regset_from_user(child, &user_score_native_view,
+						REGSET_GENERAL,
+						0, sizeof(struct pt_regs),
+						(const void __user *)datap);
 		break;
 
 	default:
-- 
cgit v1.2.3


From 125ec616f4f06565914123614e7287e9a490f2d9 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Sun, 30 Aug 2009 12:36:41 +0800
Subject: score: make init_thread_union align to THREAD_SIZE

---
 arch/score/kernel/init_task.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/score/kernel/init_task.c b/arch/score/kernel/init_task.c
index 54d9552afd6..ff952f6c63f 100644
--- a/arch/score/kernel/init_task.c
+++ b/arch/score/kernel/init_task.c
@@ -35,7 +35,7 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * "init_task" linker map entry..
  */
 union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
+	__attribute__((__section__(".data.init_task"), __aligned__(THREAD_SIZE))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
-- 
cgit v1.2.3


From 23386d63bbb3199cf247313ec088878d72debcfd Mon Sep 17 00:00:00 2001
From: Michal Schmidt <mschmidt@redhat.com>
Date: Sat, 29 Aug 2009 18:27:18 +0200
Subject: x86: Detect stack protector for i386 builds on x86_64

Stack protector support was not detected when building with
ARCH=i386 on x86_64 systems:

  arch/x86/Makefile:80: stack protector enabled but no compiler support

The "-m32" argument needs to be passed to the detection script.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090829182718.10f566b1@leela>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1b68659c41b..5e7db44d709 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -72,7 +72,7 @@ endif
 
 ifdef CONFIG_CC_STACKPROTECTOR
 	cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
-        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
+        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
                 stackp-y := -fstack-protector
                 stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
                 KBUILD_CFLAGS += $(stackp-y)
-- 
cgit v1.2.3


From 2f6dafc5fcbf3fddce345c47da1f277a156fe22a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 31 Aug 2009 13:47:06 +0900
Subject: sh: unwinder: Fix up uninitialized variable warnings on sh2a build.

A couple of these popped up on the sh2a build, causing build failures.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/dwarf.h | 2 +-
 arch/sh/kernel/dwarf.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index c367ed3373c..ced6795891a 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -200,7 +200,7 @@
  */
 static __always_inline unsigned long dwarf_read_arch_reg(unsigned int reg)
 {
-	unsigned long value;
+	unsigned long value = 0;
 
 	switch (reg) {
 	case 14:
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index 700f7e0fd65..bc4d8d75332 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -887,7 +887,7 @@ static int __init dwarf_unwinder_init(void)
 {
 	u32 entry_type;
 	void *p, *entry;
-	int count, err;
+	int count, err = 0;
 	unsigned long len;
 	unsigned int c_entries, f_entries;
 	unsigned char *end;
-- 
cgit v1.2.3


From ed24157ede901608e00f28b4897398a373e1e926 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 27 Aug 2009 07:35:50 +0000
Subject: powerpc/qe: Implement qe_alive_during_sleep() helper function

In some CPUs (i.e. MPC8569) QE shuts down completely during sleep,
drivers may want to know that to reinitialize registers and buffer
descriptors.

This patch implements qe_alive_during_sleep() helper function, so far
it just checks if MPC8569-compatible power management controller is
present, which is a sign that QE turns off during sleep.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/powerpc/include/asm/qe.h   |  1 +
 arch/powerpc/sysdev/qe_lib/qe.c | 13 +++++++++++++
 2 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 157c5ca581c..f388f0ab193 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -154,6 +154,7 @@ int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned int qe_get_num_of_risc(void);
 unsigned int qe_get_num_of_snums(void);
+int qe_alive_during_sleep(void);
 
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 237e3654f48..464271bea6c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -65,6 +65,19 @@ static unsigned int qe_num_of_snum;
 
 static phys_addr_t qebase = -1;
 
+int qe_alive_during_sleep(void)
+{
+	static int ret = -1;
+
+	if (ret != -1)
+		return ret;
+
+	ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");
+
+	return ret;
+}
+EXPORT_SYMBOL(qe_alive_during_sleep);
+
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
-- 
cgit v1.2.3


From b3f1b617f49447df6c3f5fac9c225aaea8b724ea Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 11:11:52 +0200
Subject: x86: Move get/find_smp_config to x86_init_ops

Replace the quirk machinery by a x86_init_ops function which defaults
to the standard implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/mpspec.h   | 37 ++++++++++++++++++++++++++++++-------
 arch/x86/include/asm/setup.h    |  2 --
 arch/x86/include/asm/x86_init.h |  4 ++++
 arch/x86/kernel/apic/numaq_32.c |  2 --
 arch/x86/kernel/mpparse.c       | 33 ++-------------------------------
 arch/x86/kernel/setup.c         |  2 --
 arch/x86/kernel/visws_quirks.c  | 14 ++++----------
 arch/x86/kernel/x86_init.c      |  2 ++
 8 files changed, 42 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index e3c579efde7..79c94500c0b 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -4,6 +4,7 @@
 #include <linux/init.h>
 
 #include <asm/mpspec_def.h>
+#include <asm/x86_init.h>
 
 extern int apic_version[MAX_APICS];
 extern int pic_mode;
@@ -41,9 +42,6 @@ extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 
 #endif /* CONFIG_X86_64 */
 
-extern void early_find_smp_config(void);
-extern void early_get_smp_config(void);
-
 #if defined(CONFIG_MCA) || defined(CONFIG_EISA)
 extern int mp_bus_id_to_type[MAX_MP_BUSSES];
 #endif
@@ -52,14 +50,36 @@ extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 extern unsigned int boot_cpu_physical_apicid;
 extern unsigned int max_physical_apicid;
-extern int smp_found_config;
 extern int mpc_default_type;
 extern unsigned long mp_lapic_addr;
 
-extern void get_smp_config(void);
+#ifdef CONFIG_X86_LOCAL_APIC
+extern int smp_found_config;
+#else
+# define smp_found_config 0
+#endif
+
+static inline void get_smp_config(void)
+{
+	x86_init.mpparse.get_smp_config(0);
+}
+
+static inline void early_get_smp_config(void)
+{
+	x86_init.mpparse.get_smp_config(1);
+}
+
+static inline void find_smp_config(void)
+{
+	x86_init.mpparse.find_smp_config(1);
+}
+
+static inline void early_find_smp_config(void)
+{
+	x86_init.mpparse.find_smp_config(0);
+}
 
 #ifdef CONFIG_X86_MPPARSE
-extern void find_smp_config(void);
 extern void early_reserve_e820_mpc_new(void);
 extern int enable_update_mptable;
 extern int default_mpc_apic_id(struct mpc_cpu *m);
@@ -69,13 +89,16 @@ extern void default_mpc_oem_bus_info(struct mpc_bus *m, char *str);
 # else
 #  define default_mpc_oem_bus_info NULL
 # endif
+extern void default_find_smp_config(unsigned int reserve);
+extern void default_get_smp_config(unsigned int early);
 #else
-static inline void find_smp_config(void) { }
 static inline void early_reserve_e820_mpc_new(void) { }
 #define enable_update_mptable 0
 #define default_mpc_apic_id NULL
 #define default_smp_read_mpc_oem NULL
 #define default_mpc_oem_bus_info NULL
+#define default_find_smp_config x86_init_uint_noop
+#define default_get_smp_config x86_init_uint_noop
 #endif
 
 void __cpuinit generic_processor_info(int apicid, int version);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 6121a8ac7b0..345a2551af9 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -19,8 +19,6 @@ struct x86_quirks {
 	int (*arch_pre_intr_init)(void);
 	int (*arch_intr_init)(void);
 	int (*arch_trap_init)(void);
-	int (*mach_get_smp_config)(unsigned int early);
-	int (*mach_find_smp_config)(unsigned int reserve);
 };
 
 extern void x86_quirk_intr_init(void);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 2833a873a90..e0d4729c905 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -13,6 +13,8 @@ struct mpc_table;
  * @smp_read_mpc_oem:		platform specific oem mpc table setup
  * @mpc_oem_pci_bus:		platform specific pci bus setup (default NULL)
  * @mpc_oem_bus_info:		platform specific mpc bus info
+ * @find_smp_config:		find the smp configuration
+ * @get_smp_config:		get the smp configuration
  */
 struct x86_init_mpparse {
 	void (*mpc_record)(unsigned int mode);
@@ -21,6 +23,8 @@ struct x86_init_mpparse {
 	void (*smp_read_mpc_oem)(struct mpc_table *mpc);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
+	void (*find_smp_config)(unsigned int reserve);
+	void (*get_smp_config)(unsigned int early);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 700273dca68..3dd5fd76534 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -268,8 +268,6 @@ static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_intr_init		= NULL,
 	.arch_intr_init			= NULL,
 	.arch_trap_init			= NULL,
-	.mach_get_smp_config		= NULL,
-	.mach_find_smp_config		= NULL,
 };
 
 static __init void early_check_numaq(void)
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index a42f23f1dc7..75357647b6e 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -610,7 +610,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
 /*
  * Scan the memory blocks for an SMP configuration block.
  */
-static void __init __get_smp_config(unsigned int early)
+void __init default_get_smp_config(unsigned int early)
 {
 	struct mpf_intel *mpf = mpf_found;
 
@@ -627,11 +627,6 @@ static void __init __get_smp_config(unsigned int early)
 	if (acpi_lapic && acpi_ioapic)
 		return;
 
-	if (x86_quirks->mach_get_smp_config) {
-		if (x86_quirks->mach_get_smp_config(early))
-			return;
-	}
-
 	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
 	       mpf->specification);
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
@@ -672,16 +667,6 @@ static void __init __get_smp_config(unsigned int early)
 	 */
 }
 
-void __init early_get_smp_config(void)
-{
-	__get_smp_config(1);
-}
-
-void __init get_smp_config(void)
-{
-	__get_smp_config(0);
-}
-
 static void __init smp_reserve_bootmem(struct mpf_intel *mpf)
 {
 	unsigned long size = get_mpc_size(mpf->physptr);
@@ -747,14 +732,10 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-static void __init __find_smp_config(unsigned int reserve)
+void __init default_find_smp_config(unsigned int reserve)
 {
 	unsigned int address;
 
-	if (x86_quirks->mach_find_smp_config) {
-		if (x86_quirks->mach_find_smp_config(reserve))
-			return;
-	}
 	/*
 	 * FIXME: Linux assumes you have 640K of base ram..
 	 * this continues the error...
@@ -789,16 +770,6 @@ static void __init __find_smp_config(unsigned int reserve)
 		smp_scan_config(address, 0x400, reserve);
 }
 
-void __init early_find_smp_config(void)
-{
-	__find_smp_config(0);
-}
-
-void __init find_smp_config(void)
-{
-	__find_smp_config(1);
-}
-
 #ifdef CONFIG_X86_IO_APIC
 static u8 __initdata irq_used[MAX_IRQ_SOURCES];
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c2a8090e831..54043cb7ba6 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -981,13 +981,11 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	acpi_boot_init();
 
-#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS)
 	/*
 	 * get boot-time SMP configuration:
 	 */
 	if (smp_found_config)
 		get_smp_config();
-#endif
 
 	prefill_possible_map();
 
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 97c670df1ae..31e828118f8 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -156,12 +156,8 @@ static void visws_machine_power_off(void)
 	outl(PIIX_SPECIAL_STOP, 0xCFC);
 }
 
-static int __init visws_get_smp_config(unsigned int early)
+static void __init visws_get_smp_config(unsigned int early)
 {
-	/*
-	 * Prevent MP-table parsing by the generic code:
-	 */
-	return 1;
 }
 
 /*
@@ -208,7 +204,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 	apic_version[m->apicid] = ver;
 }
 
-static int __init visws_find_smp_config(unsigned int reserve)
+static void __init visws_find_smp_config(unsigned int reserve)
 {
 	struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
 	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
@@ -230,8 +226,6 @@ static int __init visws_find_smp_config(unsigned int reserve)
 		MP_processor_info(mp++);
 
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	return 1;
 }
 
 static int visws_trap_init(void);
@@ -241,8 +235,6 @@ static struct x86_quirks visws_x86_quirks __initdata = {
 	.arch_pre_intr_init	= visws_pre_intr_init,
 	.arch_intr_init		= NULL,
 	.arch_trap_init		= visws_trap_init,
-	.mach_get_smp_config	= visws_get_smp_config,
-	.mach_find_smp_config	= visws_find_smp_config,
 };
 
 void __init visws_early_detect(void)
@@ -263,6 +255,8 @@ void __init visws_early_detect(void)
 	x86_quirks = &visws_x86_quirks;
 
 	x86_init.resources.memory_setup = visws_memory_setup;
+	x86_init.mpparse.get_smp_config = visws_get_smp_config;
+	x86_init.mpparse.find_smp_config = visws_find_smp_config;
 
 	/*
 	 * Install reboot quirks:
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 27685edc546..3488fb62ac0 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -32,5 +32,7 @@ struct __initdata x86_init_ops x86_init = {
 		.mpc_apic_id		= default_mpc_apic_id,
 		.smp_read_mpc_oem	= default_smp_read_mpc_oem,
 		.mpc_oem_bus_info	= default_mpc_oem_bus_info,
+		.find_smp_config	= default_find_smp_config,
+		.get_smp_config		= default_get_smp_config,
 	},
 };
-- 
cgit v1.2.3


From d9112f43021554ded2ef2b9bea5f88ba4b52abe0 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 09:41:38 +0200
Subject: x86: Move pre_intr_init to x86_init_ops

Replace the quirk machinery by a x86_init_ops function which
defaults to the standard implementation. This is also a preparatory
patch for Moorestown support which needs to replace the default
init_ISA_irqs as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/irq.h      |  2 ++
 arch/x86/include/asm/setup.h    |  1 -
 arch/x86/include/asm/x86_init.h | 10 ++++++++++
 arch/x86/kernel/apic/numaq_32.c |  1 -
 arch/x86/kernel/irqinit.c       | 24 ++----------------------
 arch/x86/kernel/visws_quirks.c  | 10 +++-------
 arch/x86/kernel/x86_init.c      |  5 +++++
 7 files changed, 22 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index f38481bcd45..8fe2782a253 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -47,4 +47,6 @@ extern unsigned int do_IRQ(struct pt_regs *regs);
 extern DECLARE_BITMAP(used_vectors, NR_VECTORS);
 extern int vector_used_by_percpu_irq(unsigned int vector);
 
+extern void init_ISA_irqs(void);
+
 #endif /* _ASM_X86_IRQ_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 345a2551af9..66a319709d6 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -16,7 +16,6 @@
 struct x86_quirks {
 	int (*arch_pre_time_init)(void);
 	int (*arch_time_init)(void);
-	int (*arch_pre_intr_init)(void);
 	int (*arch_intr_init)(void);
 	int (*arch_trap_init)(void);
 };
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e0d4729c905..65e3394c77f 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -43,6 +43,15 @@ struct x86_init_resources {
 	char *(*memory_setup)(void);
 };
 
+/**
+ * struct x86_init_irqs - platform specific interrupt setup
+ * @pre_vector_init:		init code to run before interrupt vectors
+ *				are set up.
+ */
+struct x86_init_irqs {
+	void (*pre_vector_init)(void);
+};
+
 /**
  * struct x86_init_ops - functions for platform specific setup
  *
@@ -50,6 +59,7 @@ struct x86_init_resources {
 struct x86_init_ops {
 	struct x86_init_resources	resources;
 	struct x86_init_mpparse		mpparse;
+	struct x86_init_irqs		irqs;
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 3dd5fd76534..ec8b3113716 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -265,7 +265,6 @@ static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init		= numaq_pre_time_init,
 	.arch_time_init			= NULL,
-	.arch_pre_intr_init		= NULL,
 	.arch_intr_init			= NULL,
 	.arch_trap_init			= NULL,
 };
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 92b7703d3d5..acdf088c758 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -116,7 +116,7 @@ int vector_used_by_percpu_irq(unsigned int vector)
 	return 0;
 }
 
-static void __init init_ISA_irqs(void)
+void __init init_ISA_irqs(void)
 {
 	int i;
 
@@ -213,32 +213,12 @@ static void __init apic_intr_init(void)
 #endif
 }
 
-/**
- * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
- *
- * Description:
- *	Perform any necessary interrupt initialisation prior to setting up
- *	the "ordinary" interrupt call gates.  For legacy reasons, the ISA
- *	interrupts should be initialised here if the machine emulates a PC
- *	in any way.
- **/
-static void __init x86_quirk_pre_intr_init(void)
-{
-#ifdef CONFIG_X86_32
-	if (x86_quirks->arch_pre_intr_init) {
-		if (x86_quirks->arch_pre_intr_init())
-			return;
-	}
-#endif
-	init_ISA_irqs();
-}
-
 void __init native_init_IRQ(void)
 {
 	int i;
 
 	/* Execute any quirks before the call gates are initialised: */
-	x86_quirk_pre_intr_init();
+	x86_init.irqs.pre_vector_init();
 
 	apic_intr_init();
 
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 31e828118f8..1d6309d70df 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -73,14 +73,10 @@ static int __init visws_time_init(void)
 	return 0;
 }
 
-static int __init visws_pre_intr_init(void)
+/* Replaces the default init_ISA_irqs in the generic setup */
+static void __init visws_pre_intr_init(void)
 {
 	init_VISWS_APIC_irqs();
-
-	/*
-	 * We dont want ISA irqs to be set up by the generic code:
-	 */
-	return 1;
 }
 
 /* Quirk for machine specific memory setup. */
@@ -232,7 +228,6 @@ static int visws_trap_init(void);
 
 static struct x86_quirks visws_x86_quirks __initdata = {
 	.arch_time_init		= visws_time_init,
-	.arch_pre_intr_init	= visws_pre_intr_init,
 	.arch_intr_init		= NULL,
 	.arch_trap_init		= visws_trap_init,
 };
@@ -257,6 +252,7 @@ void __init visws_early_detect(void)
 	x86_init.resources.memory_setup = visws_memory_setup;
 	x86_init.mpparse.get_smp_config = visws_get_smp_config;
 	x86_init.mpparse.find_smp_config = visws_find_smp_config;
+	x86_init.irqs.pre_vector_init = visws_pre_intr_init;
 
 	/*
 	 * Install reboot quirks:
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 3488fb62ac0..f2abe2136da 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -9,6 +9,7 @@
 #include <asm/mpspec.h>
 #include <asm/setup.h>
 #include <asm/e820.h>
+#include <asm/irq.h>
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
@@ -35,4 +36,8 @@ struct __initdata x86_init_ops x86_init = {
 		.find_smp_config	= default_find_smp_config,
 		.get_smp_config		= default_get_smp_config,
 	},
+
+	.irqs = {
+		.pre_vector_init	= init_ISA_irqs,
+	},
 };
-- 
cgit v1.2.3


From 66bcaf0bde100a4b54b82fc6fea6ceee2212ffb4 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 09:59:09 +0200
Subject: x86: Move irq_init to x86_init_ops

irq_init is overridden by x86_quirks and by paravirts. Unify the whole
mess and make it an unconditional x86_init_ops function which defaults
to the standard function and can be overridden by the early platform
code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/irq.h            |  1 -
 arch/x86/include/asm/paravirt_types.h |  2 --
 arch/x86/include/asm/setup.h          |  3 ---
 arch/x86/include/asm/x86_init.h       |  2 ++
 arch/x86/kernel/apic/numaq_32.c       |  1 -
 arch/x86/kernel/irqinit.c             | 12 ++++--------
 arch/x86/kernel/paravirt.c            |  6 ------
 arch/x86/kernel/setup.c               | 17 -----------------
 arch/x86/kernel/visws_quirks.c        |  1 -
 arch/x86/kernel/x86_init.c            |  1 +
 arch/x86/lguest/boot.c                |  2 +-
 arch/x86/xen/irq.c                    |  5 +++--
 12 files changed, 11 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 8fe2782a253..ddda6cbed6f 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -37,7 +37,6 @@ extern void fixup_irqs(void);
 #endif
 
 extern void (*generic_interrupt_extension)(void);
-extern void init_IRQ(void);
 extern void native_init_IRQ(void);
 extern bool handle_irq(unsigned irq, struct pt_regs *regs);
 
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 6d668968b6b..25922afb634 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -201,8 +201,6 @@ struct pv_cpu_ops {
 };
 
 struct pv_irq_ops {
-	void (*init_IRQ)(void);
-
 	/*
 	 * Get/set interrupt state.  save_fl and restore_fl are only
 	 * expected to use X86_EFLAGS_IF; all other bits
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 66a319709d6..404086f9411 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -16,12 +16,9 @@
 struct x86_quirks {
 	int (*arch_pre_time_init)(void);
 	int (*arch_time_init)(void);
-	int (*arch_intr_init)(void);
 	int (*arch_trap_init)(void);
 };
 
-extern void x86_quirk_intr_init(void);
-
 extern void x86_quirk_trap_init(void);
 
 extern void x86_quirk_pre_time_init(void);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 65e3394c77f..8d7be65ccf7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -47,9 +47,11 @@ struct x86_init_resources {
  * struct x86_init_irqs - platform specific interrupt setup
  * @pre_vector_init:		init code to run before interrupt vectors
  *				are set up.
+ * @intr_init:			interrupt init code
  */
 struct x86_init_irqs {
 	void (*pre_vector_init)(void);
+	void (*intr_init)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index ec8b3113716..eafd341e42d 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -265,7 +265,6 @@ static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init		= numaq_pre_time_init,
 	.arch_time_init			= NULL,
-	.arch_intr_init			= NULL,
 	.arch_trap_init			= NULL,
 };
 
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index acdf088c758..e0142cda239 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -140,8 +140,10 @@ void __init init_ISA_irqs(void)
 	}
 }
 
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+void init_IRQ(void)
+{
+	x86_init.irqs.intr_init();
+}
 
 static void __init smp_intr_init(void)
 {
@@ -237,12 +239,6 @@ void __init native_init_IRQ(void)
 		setup_irq(2, &irq2);
 
 #ifdef CONFIG_X86_32
-	/*
-	 * Call quirks after call gates are initialised (usually add in
-	 * the architecture specific gates):
-	 */
-	x86_quirk_intr_init();
-
 	/*
 	 * External FPU? Set up irq13 if so, for
 	 * original braindamaged IBM FERR coupling.
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 532c9a2626c..d76bfbec71a 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -183,11 +183,6 @@ unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
 	return insn_len;
 }
 
-void init_IRQ(void)
-{
-	pv_irq_ops.init_IRQ();
-}
-
 static void native_flush_tlb(void)
 {
 	__native_flush_tlb();
@@ -328,7 +323,6 @@ struct pv_time_ops pv_time_ops = {
 };
 
 struct pv_irq_ops pv_irq_ops = {
-	.init_IRQ = native_init_IRQ,
 	.save_fl = __PV_IS_CALLEE_SAVE(native_save_fl),
 	.restore_fl = __PV_IS_CALLEE_SAVE(native_restore_fl),
 	.irq_disable = __PV_IS_CALLEE_SAVE(native_irq_disable),
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 54043cb7ba6..d3da0f7333f 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1020,23 +1020,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_X86_32
 
-/**
- * x86_quirk_intr_init - post gate setup interrupt initialisation
- *
- * Description:
- *	Fill in any interrupts that may have been left out by the general
- *	init_IRQ() routine.  interrupts having to do with the machine rather
- *	than the devices on the I/O bus (like APIC interrupts in intel MP
- *	systems) are started here.
- **/
-void __init x86_quirk_intr_init(void)
-{
-	if (x86_quirks->arch_intr_init) {
-		if (x86_quirks->arch_intr_init())
-			return;
-	}
-}
-
 /**
  * x86_quirk_trap_init - initialise system specific traps
  *
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 1d6309d70df..a49013716da 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -228,7 +228,6 @@ static int visws_trap_init(void);
 
 static struct x86_quirks visws_x86_quirks __initdata = {
 	.arch_time_init		= visws_time_init,
-	.arch_intr_init		= NULL,
 	.arch_trap_init		= visws_trap_init,
 };
 
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index f2abe2136da..8cb59332e3b 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -39,5 +39,6 @@ struct __initdata x86_init_ops x86_init = {
 
 	.irqs = {
 		.pre_vector_init	= init_ISA_irqs,
+		.intr_init		= native_init_IRQ,
 	},
 };
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 11445c176de..1ff986511f1 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1262,7 +1262,6 @@ __init void lguest_init(void)
 	 */
 
 	/* Interrupt-related operations */
-	pv_irq_ops.init_IRQ = lguest_init_IRQ;
 	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
 	pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
 	pv_irq_ops.irq_disable = PV_CALLEE_SAVE(irq_disable);
@@ -1325,6 +1324,7 @@ __init void lguest_init(void)
 	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
 	x86_init.resources.memory_setup = lguest_memory_setup;
+	x86_init.irqs.intr_init = lguest_init_IRQ;
 
 	/*
 	 * Now is a good time to look at the implementations of these functions
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
index cfd17799bd6..9d30105a0c4 100644
--- a/arch/x86/xen/irq.c
+++ b/arch/x86/xen/irq.c
@@ -1,5 +1,7 @@
 #include <linux/hardirq.h>
 
+#include <asm/x86_init.h>
+
 #include <xen/interface/xen.h>
 #include <xen/interface/sched.h>
 #include <xen/interface/vcpu.h>
@@ -112,8 +114,6 @@ static void xen_halt(void)
 }
 
 static const struct pv_irq_ops xen_irq_ops __initdata = {
-	.init_IRQ = xen_init_IRQ,
-
 	.save_fl = PV_CALLEE_SAVE(xen_save_fl),
 	.restore_fl = PV_CALLEE_SAVE(xen_restore_fl),
 	.irq_disable = PV_CALLEE_SAVE(xen_irq_disable),
@@ -129,4 +129,5 @@ static const struct pv_irq_ops xen_irq_ops __initdata = {
 void __init xen_init_irq_ops()
 {
 	pv_irq_ops = xen_irq_ops;
+	x86_init.irqs.intr_init = xen_init_IRQ;
 }
-- 
cgit v1.2.3


From 428cf9025b15573e16e658032f2b963283e34ae0 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 10:35:46 +0200
Subject: x86: Move traps_init to x86_init_ops

Replace the quirks by a simple x86_init_ops function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/setup.h    |  3 ---
 arch/x86/include/asm/x86_init.h |  2 ++
 arch/x86/kernel/apic/numaq_32.c |  1 -
 arch/x86/kernel/setup.c         | 15 ---------------
 arch/x86/kernel/traps.c         |  5 ++---
 arch/x86/kernel/visws_quirks.c  |  8 +++-----
 arch/x86/kernel/x86_init.c      |  1 +
 7 files changed, 8 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 404086f9411..7751d1f92bc 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -16,11 +16,8 @@
 struct x86_quirks {
 	int (*arch_pre_time_init)(void);
 	int (*arch_time_init)(void);
-	int (*arch_trap_init)(void);
 };
 
-extern void x86_quirk_trap_init(void);
-
 extern void x86_quirk_pre_time_init(void);
 extern void x86_quirk_time_init(void);
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 8d7be65ccf7..07c37bd879f 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -48,10 +48,12 @@ struct x86_init_resources {
  * @pre_vector_init:		init code to run before interrupt vectors
  *				are set up.
  * @intr_init:			interrupt init code
+ * @trap_init:			platform specific trap setup
  */
 struct x86_init_irqs {
 	void (*pre_vector_init)(void);
 	void (*intr_init)(void);
+	void (*trap_init)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index eafd341e42d..71c5ea64586 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -265,7 +265,6 @@ static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 static struct x86_quirks numaq_x86_quirks __initdata = {
 	.arch_pre_time_init		= numaq_pre_time_init,
 	.arch_time_init			= NULL,
-	.arch_trap_init			= NULL,
 };
 
 static __init void early_check_numaq(void)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d3da0f7333f..bf3b87f1f7d 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1020,21 +1020,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_X86_32
 
-/**
- * x86_quirk_trap_init - initialise system specific traps
- *
- * Description:
- *	Called as the final act of trap_init().  Used in VISWS to initialise
- *	the various board specific APIC traps.
- **/
-void __init x86_quirk_trap_init(void)
-{
-	if (x86_quirks->arch_trap_init) {
-		if (x86_quirks->arch_trap_init())
-			return;
-	}
-}
-
 static struct irqaction irq0  = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7e4b1f5dec8..ed96ed53f69 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -59,6 +59,7 @@
 #include <asm/mach_traps.h>
 
 #ifdef CONFIG_X86_64
+#include <asm/x86_init.h>
 #include <asm/pgalloc.h>
 #include <asm/proto.h>
 #else
@@ -980,7 +981,5 @@ void __init trap_init(void)
 	 */
 	cpu_init();
 
-#ifdef CONFIG_X86_32
-	x86_quirk_trap_init();
-#endif
+	x86_init.irqs.trap_init();
 }
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index a49013716da..2719091b335 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -224,11 +224,10 @@ static void __init visws_find_smp_config(unsigned int reserve)
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 }
 
-static int visws_trap_init(void);
+static void visws_trap_init(void);
 
 static struct x86_quirks visws_x86_quirks __initdata = {
 	.arch_time_init		= visws_time_init,
-	.arch_trap_init		= visws_trap_init,
 };
 
 void __init visws_early_detect(void)
@@ -252,6 +251,7 @@ void __init visws_early_detect(void)
 	x86_init.mpparse.get_smp_config = visws_get_smp_config;
 	x86_init.mpparse.find_smp_config = visws_find_smp_config;
 	x86_init.irqs.pre_vector_init = visws_pre_intr_init;
+	x86_init.irqs.trap_init = visws_trap_init;
 
 	/*
 	 * Install reboot quirks:
@@ -390,12 +390,10 @@ static __init void cobalt_init(void)
 		co_apic_read(CO_APIC_ID));
 }
 
-static int __init visws_trap_init(void)
+static void __init visws_trap_init(void)
 {
 	lithium_init();
 	cobalt_init();
-
-	return 1;
 }
 
 /*
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 8cb59332e3b..9f2b775dc72 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -40,5 +40,6 @@ struct __initdata x86_init_ops x86_init = {
 	.irqs = {
 		.pre_vector_init	= init_ISA_irqs,
 		.intr_init		= native_init_IRQ,
+		.trap_init		= x86_init_noop,
 	},
 };
-- 
cgit v1.2.3


From 42bbdb43b16d233b2dacb4cd76e28f61c2a86dc6 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 13:04:10 +0200
Subject: x86: Replace ARCH_SETUP by a proper x86_init_ops

ARCH_SETUP is a horrible leftover from the old arch/i386 mach support
code. It still has a lonely user in xen. Move it to x86_init_ops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/paravirt.h       | 1 -
 arch/x86/include/asm/paravirt_types.h | 1 -
 arch/x86/include/asm/x86_init.h       | 9 +++++++++
 arch/x86/kernel/paravirt.c            | 1 -
 arch/x86/kernel/setup.c               | 6 +-----
 arch/x86/kernel/x86_init.c            | 4 ++++
 arch/x86/xen/enlighten.c              | 2 +-
 7 files changed, 15 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 6a07af432c8..22cb3872f6d 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -24,7 +24,6 @@ static inline void load_sp0(struct tss_struct *tss,
 	PVOP_VCALL2(pv_cpu_ops.load_sp0, tss, thread);
 }
 
-#define ARCH_SETUP			pv_init_ops.arch_setup();
 static inline unsigned long get_wallclock(void)
 {
 	return PVOP_CALL0(unsigned long, pv_time_ops.get_wallclock);
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 25922afb634..a05085e5fdb 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -80,7 +80,6 @@ struct pv_init_ops {
 			  unsigned long addr, unsigned len);
 
 	/* Basic arch-specific setup */
-	void (*arch_setup)(void);
 	void (*post_allocator_init)(void);
 
 	/* Print a banner to identify the environment */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 07c37bd879f..ceffbf358fc 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -56,6 +56,14 @@ struct x86_init_irqs {
 	void (*trap_init)(void);
 };
 
+/**
+ * struct x86_init_oem - oem platform specific customizing functions
+ * @arch_setup:			platform specific architecure setup
+ */
+struct x86_init_oem {
+	void (*arch_setup)(void);
+};
+
 /**
  * struct x86_init_ops - functions for platform specific setup
  *
@@ -64,6 +72,7 @@ struct x86_init_ops {
 	struct x86_init_resources	resources;
 	struct x86_init_mpparse		mpparse;
 	struct x86_init_irqs		irqs;
+	struct x86_init_oem		oem;
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index d76bfbec71a..80275ef1651 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -311,7 +311,6 @@ struct pv_info pv_info = {
 struct pv_init_ops pv_init_ops = {
 	.patch = native_patch,
 	.banner = default_banner,
-	.arch_setup = paravirt_nop,
 };
 
 struct pv_time_ops pv_time_ops = {
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index bf3b87f1f7d..d12aa82c9c3 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -108,10 +108,6 @@
 #include <asm/numa_64.h>
 #endif
 
-#ifndef ARCH_SETUP
-#define ARCH_SETUP
-#endif
-
 /*
  * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
  * The direct mapping extends to max_pfn_mapped, so that we can directly access
@@ -750,7 +746,7 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif
 
-	ARCH_SETUP
+	x86_init.oem.arch_setup();
 
 	setup_memory_map();
 	parse_setup_data();
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 9f2b775dc72..fa2d849be35 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -42,4 +42,8 @@ struct __initdata x86_init_ops x86_init = {
 		.intr_init		= native_init_IRQ,
 		.trap_init		= x86_init_noop,
 	},
+
+	.oem = {
+		.arch_setup		= x86_init_noop,
+	},
 };
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 50b20c64f0b..73c7b1d610f 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -841,7 +841,6 @@ static const struct pv_init_ops xen_init_ops __initdata = {
 	.patch = xen_patch,
 
 	.banner = xen_banner,
-	.arch_setup = xen_arch_setup,
 	.post_allocator_init = xen_post_allocator_init,
 };
 
@@ -982,6 +981,7 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_mmu_ops = xen_mmu_ops;
 
 	x86_init.resources.memory_setup = xen_memory_setup;
+	x86_init.oem.arch_setup = xen_arch_setup;
 
 #ifdef CONFIG_X86_64
 	/*
-- 
cgit v1.2.3


From 6f30c1ac3fcf11e08f00670f293546a112cdf4e3 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 13:19:57 +0200
Subject: x86: Move paravirt banner printout to x86_init_ops

Replace another obscure paravirt magic and move it to
x86_init_ops. Such a hook is also useful for embedded and special
hardware.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/paravirt.h       |  6 +++++-
 arch/x86/include/asm/paravirt_types.h |  3 ---
 arch/x86/include/asm/x86_init.h       |  2 ++
 arch/x86/kernel/paravirt.c            | 10 +---------
 arch/x86/kernel/setup.c               |  1 +
 arch/x86/kernel/x86_init.c            |  2 ++
 arch/x86/xen/enlighten.c              |  2 +-
 7 files changed, 12 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 22cb3872f6d..3de6435a106 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -918,6 +918,8 @@ static inline unsigned long __raw_local_irq_save(void)
 #undef PVOP_VCALL4
 #undef PVOP_CALL4
 
+extern void default_banner(void);
+
 #else  /* __ASSEMBLY__ */
 
 #define _PVSITE(ptype, clobbers, ops, word, algn)	\
@@ -1058,5 +1060,7 @@ static inline unsigned long __raw_local_irq_save(void)
 #endif	/* CONFIG_X86_32 */
 
 #endif /* __ASSEMBLY__ */
-#endif /* CONFIG_PARAVIRT */
+#else  /* CONFIG_PARAVIRT */
+# define default_banner x86_init_noop
+#endif /* !CONFIG_PARAVIRT */
 #endif /* _ASM_X86_PARAVIRT_H */
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index a05085e5fdb..ce7723c81a1 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -81,9 +81,6 @@ struct pv_init_ops {
 
 	/* Basic arch-specific setup */
 	void (*post_allocator_init)(void);
-
-	/* Print a banner to identify the environment */
-	void (*banner)(void);
 };
 
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index ceffbf358fc..ee7c59df781 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -59,9 +59,11 @@ struct x86_init_irqs {
 /**
  * struct x86_init_oem - oem platform specific customizing functions
  * @arch_setup:			platform specific architecure setup
+ * @banner:			print a platform specific banner
  */
 struct x86_init_oem {
 	void (*arch_setup)(void);
+	void (*banner)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 80275ef1651..f7a5fb79d18 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -54,7 +54,7 @@ u64 _paravirt_ident_64(u64 x)
 	return x;
 }
 
-static void __init default_banner(void)
+void __init default_banner(void)
 {
 	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
 	       pv_info.name);
@@ -208,13 +208,6 @@ extern void native_irq_enable_sysexit(void);
 extern void native_usergs_sysret32(void);
 extern void native_usergs_sysret64(void);
 
-static int __init print_banner(void)
-{
-	pv_init_ops.banner();
-	return 0;
-}
-core_initcall(print_banner);
-
 static struct resource reserve_ioports = {
 	.start = 0,
 	.end = IO_SPACE_LIMIT,
@@ -310,7 +303,6 @@ struct pv_info pv_info = {
 
 struct pv_init_ops pv_init_ops = {
 	.patch = native_patch,
-	.banner = default_banner,
 };
 
 struct pv_time_ops pv_time_ops = {
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d12aa82c9c3..bc5f0e561cf 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1012,6 +1012,7 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
+	x86_init.oem.banner();
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index fa2d849be35..08fea49d59a 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -6,6 +6,7 @@
 #include <linux/init.h>
 
 #include <asm/bios_ebda.h>
+#include <asm/paravirt.h>
 #include <asm/mpspec.h>
 #include <asm/setup.h>
 #include <asm/e820.h>
@@ -45,5 +46,6 @@ struct __initdata x86_init_ops x86_init = {
 
 	.oem = {
 		.arch_setup		= x86_init_noop,
+		.banner			= default_banner,
 	},
 };
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 73c7b1d610f..46e23cde143 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -840,7 +840,6 @@ static const struct pv_info xen_info __initdata = {
 static const struct pv_init_ops xen_init_ops __initdata = {
 	.patch = xen_patch,
 
-	.banner = xen_banner,
 	.post_allocator_init = xen_post_allocator_init,
 };
 
@@ -982,6 +981,7 @@ asmlinkage void __init xen_start_kernel(void)
 
 	x86_init.resources.memory_setup = xen_memory_setup;
 	x86_init.oem.arch_setup = xen_arch_setup;
+	x86_init.oem.banner = xen_banner;
 
 #ifdef CONFIG_X86_64
 	/*
-- 
cgit v1.2.3


From 030cb6c00d242c20e92a3327d0cac17ce02d0cc3 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 14:30:02 +0200
Subject: x86: Move paravirt pagetable_setup to x86_init_ops

Replace more paravirt hackery by proper x86_init_ops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/paravirt.h       | 10 ----------
 arch/x86/include/asm/paravirt_types.h |  9 ---------
 arch/x86/include/asm/pgtable.h        | 10 ----------
 arch/x86/include/asm/pgtable_types.h  |  4 ++--
 arch/x86/include/asm/x86_init.h       | 13 +++++++++++++
 arch/x86/kernel/paravirt.c            |  7 -------
 arch/x86/kernel/setup.c               |  4 ++--
 arch/x86/kernel/x86_init.c            |  6 ++++++
 arch/x86/xen/enlighten.c              |  2 +-
 arch/x86/xen/mmu.c                    | 11 +++++++----
 arch/x86/xen/mmu.h                    |  2 +-
 11 files changed, 32 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 3de6435a106..1caf25b91e6 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -351,16 +351,6 @@ static inline void paravirt_post_allocator_init(void)
 		(*pv_init_ops.post_allocator_init)();
 }
 
-static inline void paravirt_pagetable_setup_start(pgd_t *base)
-{
-	(*pv_mmu_ops.pagetable_setup_start)(base);
-}
-
-static inline void paravirt_pagetable_setup_done(pgd_t *base)
-{
-	(*pv_mmu_ops.pagetable_setup_done)(base);
-}
-
 #ifdef CONFIG_SMP
 static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 				    unsigned long start_esp)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index ce7723c81a1..4039eefd3eb 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -231,15 +231,6 @@ struct pv_apic_ops {
 };
 
 struct pv_mmu_ops {
-	/*
-	 * Called before/after init_mm pagetable setup. setup_start
-	 * may reset %cr3, and may pre-install parts of the pagetable;
-	 * pagetable setup is expected to preserve any existing
-	 * mapping.
-	 */
-	void (*pagetable_setup_start)(pgd_t *pgd_base);
-	void (*pagetable_setup_done)(pgd_t *pgd_base);
-
 	unsigned long (*read_cr2)(void);
 	void (*write_cr2)(unsigned long);
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 16748077559..60d422adf70 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -56,16 +56,6 @@ extern struct list_head pgd_list;
 #define pte_update(mm, addr, ptep)              do { } while (0)
 #define pte_update_defer(mm, addr, ptep)        do { } while (0)
 
-static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
-{
-	native_pagetable_setup_start(base);
-}
-
-static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
-{
-	native_pagetable_setup_done(base);
-}
-
 #define pgd_val(x)	native_pgd_val(x)
 #define __pgd(x)	native_make_pgd(x)
 
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 54cb697f490..7b467bf3c68 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -299,8 +299,8 @@ void set_pte_vaddr(unsigned long vaddr, pte_t pte);
 extern void native_pagetable_setup_start(pgd_t *base);
 extern void native_pagetable_setup_done(pgd_t *base);
 #else
-static inline void native_pagetable_setup_start(pgd_t *base) {}
-static inline void native_pagetable_setup_done(pgd_t *base) {}
+#define native_pagetable_setup_start x86_init_pgd_noop
+#define native_pagetable_setup_done  x86_init_pgd_noop
 #endif
 
 struct seq_file;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index ee7c59df781..b9bb4faefc4 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_PLATFORM_H
 #define _ASM_X86_PLATFORM_H
 
+#include <asm/pgtable_types.h>
+
 struct mpc_bus;
 struct mpc_cpu;
 struct mpc_table;
@@ -66,6 +68,16 @@ struct x86_init_oem {
 	void (*banner)(void);
 };
 
+/**
+ * struct x86_init_paging - platform specific paging functions
+ * @pagetable_setup_start:	platform specific pre paging_init() call
+ * @pagetable_setup_done:	platform specific post paging_init() call
+ */
+struct x86_init_paging {
+	void (*pagetable_setup_start)(pgd_t *base);
+	void (*pagetable_setup_done)(pgd_t *base);
+};
+
 /**
  * struct x86_init_ops - functions for platform specific setup
  *
@@ -75,6 +87,7 @@ struct x86_init_ops {
 	struct x86_init_mpparse		mpparse;
 	struct x86_init_irqs		irqs;
 	struct x86_init_oem		oem;
+	struct x86_init_paging		paging;
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index f7a5fb79d18..8167be0b68c 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -402,13 +402,6 @@ struct pv_apic_ops pv_apic_ops = {
 #endif
 
 struct pv_mmu_ops pv_mmu_ops = {
-#ifndef CONFIG_X86_64
-	.pagetable_setup_start = native_pagetable_setup_start,
-	.pagetable_setup_done = native_pagetable_setup_done,
-#else
-	.pagetable_setup_start = paravirt_nop,
-	.pagetable_setup_done = paravirt_nop,
-#endif
 
 	.read_cr2 = native_read_cr2,
 	.write_cr2 = native_write_cr2,
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index bc5f0e561cf..4952d63dd67 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -959,9 +959,9 @@ void __init setup_arch(char **cmdline_p)
 	kvmclock_init();
 #endif
 
-	paravirt_pagetable_setup_start(swapper_pg_dir);
+	x86_init.paging.pagetable_setup_start(swapper_pg_dir);
 	paging_init();
-	paravirt_pagetable_setup_done(swapper_pg_dir);
+	x86_init.paging.pagetable_setup_done(swapper_pg_dir);
 	paravirt_post_allocator_init();
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 08fea49d59a..7df020e6740 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -14,6 +14,7 @@
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
+void __init x86_init_pgd_noop(pgd_t *unused) { }
 
 /*
  * The platform setup functions are preset with the default functions
@@ -48,4 +49,9 @@ struct __initdata x86_init_ops x86_init = {
 		.arch_setup		= x86_init_noop,
 		.banner			= default_banner,
 	},
+
+	.paging = {
+		.pagetable_setup_start	= native_pagetable_setup_start,
+		.pagetable_setup_done	= native_pagetable_setup_done,
+	},
 };
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 46e23cde143..12ea09ec39b 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -977,7 +977,6 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_time_ops = xen_time_ops;
 	pv_cpu_ops = xen_cpu_ops;
 	pv_apic_ops = xen_apic_ops;
-	pv_mmu_ops = xen_mmu_ops;
 
 	x86_init.resources.memory_setup = xen_memory_setup;
 	x86_init.oem.arch_setup = xen_arch_setup;
@@ -991,6 +990,7 @@ asmlinkage void __init xen_start_kernel(void)
 	load_percpu_segment(0);
 #endif
 
+	xen_init_mmu_ops();
 	xen_init_irq_ops();
 	xen_init_cpuid_mask();
 
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 4ceb2858165..dbec51da930 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1875,10 +1875,7 @@ static void xen_leave_lazy_mmu(void)
 	preempt_enable();
 }
 
-const struct pv_mmu_ops xen_mmu_ops __initdata = {
-	.pagetable_setup_start = xen_pagetable_setup_start,
-	.pagetable_setup_done = xen_pagetable_setup_done,
-
+static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.read_cr2 = xen_read_cr2,
 	.write_cr2 = xen_write_cr2,
 
@@ -1954,6 +1951,12 @@ const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.set_fixmap = xen_set_fixmap,
 };
 
+void __init xen_init_mmu_ops(void)
+{
+	x86_init.paging.pagetable_setup_start = xen_pagetable_setup_start;
+	x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
+	pv_mmu_ops = xen_mmu_ops;
+}
 
 #ifdef CONFIG_XEN_DEBUG_FS
 
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index da730262489..5fe6bc7f5ec 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -59,5 +59,5 @@ void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 
 unsigned long xen_read_cr2_direct(void);
 
-extern const struct pv_mmu_ops xen_mmu_ops;
+extern void xen_init_mmu_ops(void);
 #endif	/* _XEN_MMU_H */
-- 
cgit v1.2.3


From f1d7062a235d057e5d85ed2860bef609e0160cde Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 13:13:52 +0200
Subject: x86: Move xen_post_allocator_init into xen_pagetable_setup_done

We really do not need two paravirt/x86_init_ops functions which are
called in two consecutive source lines. Move the only user of
post_allocator_init into the already existing pagetable_setup_done
function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/paravirt.h       | 6 ------
 arch/x86/include/asm/paravirt_types.h | 3 ---
 arch/x86/include/asm/setup.h          | 4 ----
 arch/x86/kernel/setup.c               | 1 -
 arch/x86/xen/enlighten.c              | 2 --
 arch/x86/xen/mmu.c                    | 5 ++++-
 arch/x86/xen/xen-ops.h                | 2 --
 7 files changed, 4 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 1caf25b91e6..7ce415e844b 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -345,12 +345,6 @@ static inline void setup_secondary_clock(void)
 }
 #endif
 
-static inline void paravirt_post_allocator_init(void)
-{
-	if (pv_init_ops.post_allocator_init)
-		(*pv_init_ops.post_allocator_init)();
-}
-
 #ifdef CONFIG_SMP
 static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 				    unsigned long start_esp)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 4039eefd3eb..ecc74e5ad40 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -78,9 +78,6 @@ struct pv_init_ops {
 	 */
 	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
 			  unsigned long addr, unsigned len);
-
-	/* Basic arch-specific setup */
-	void (*post_allocator_init)(void);
 };
 
 
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 7751d1f92bc..58b58952b80 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -63,10 +63,6 @@ static inline int is_visws_box(void) { return 0; }
 extern struct x86_quirks *x86_quirks;
 extern unsigned long saved_video_mode;
 
-#ifndef CONFIG_PARAVIRT
-#define paravirt_post_allocator_init()	do {} while (0)
-#endif
-
 extern void reserve_standard_io_resources(void);
 extern void i386_reserve_resources(void);
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 4952d63dd67..43ec6aa175b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -962,7 +962,6 @@ void __init setup_arch(char **cmdline_p)
 	x86_init.paging.pagetable_setup_start(swapper_pg_dir);
 	paging_init();
 	x86_init.paging.pagetable_setup_done(swapper_pg_dir);
-	paravirt_post_allocator_init();
 
 #ifdef CONFIG_X86_64
 	map_vsyscall();
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 12ea09ec39b..a924caa168d 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -839,8 +839,6 @@ static const struct pv_info xen_info __initdata = {
 
 static const struct pv_init_ops xen_init_ops __initdata = {
 	.patch = xen_patch,
-
-	.post_allocator_init = xen_post_allocator_init,
 };
 
 static const struct pv_time_ops xen_time_ops __initdata = {
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index dbec51da930..093dd59b538 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1229,9 +1229,12 @@ static __init void xen_pagetable_setup_start(pgd_t *base)
 {
 }
 
+static void xen_post_allocator_init(void);
+
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
 	xen_setup_shared_info();
+	xen_post_allocator_init();
 }
 
 static void xen_write_cr2(unsigned long cr2)
@@ -1841,7 +1844,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot)
 #endif
 }
 
-__init void xen_post_allocator_init(void)
+static __init void xen_post_allocator_init(void)
 {
 	pv_mmu_ops.set_pte = xen_set_pte;
 	pv_mmu_ops.set_pmd = xen_set_pmd;
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 22494fd4c9b..355fa6b99c9 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -30,8 +30,6 @@ pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
 void xen_ident_map_ISA(void);
 void xen_reserve_top(void);
 
-void xen_post_allocator_init(void);
-
 char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
 void __init xen_init_IRQ(void);
-- 
cgit v1.2.3


From 736decac643e8982655e22ac7f0e5e61c5b7f9bd Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 19 Aug 2009 12:35:53 +0200
Subject: x86: Move percpu clockevents setup to x86_init_ops

paravirt overrides the setup of the default apic timers as per cpu
timers. Moorestown needs to override that as well.

Move it to x86_init_ops setup and create a separate x86_cpuinit struct
which holds the function for the secondary evtl. hotplugabble CPUs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/apic.h           |  5 ++---
 arch/x86/include/asm/paravirt.h       | 12 ------------
 arch/x86/include/asm/paravirt_types.h |  3 ---
 arch/x86/include/asm/x86_init.h       | 19 +++++++++++++++++++
 arch/x86/kernel/apic/apic.c           |  3 ++-
 arch/x86/kernel/kvmclock.c            |  5 ++++-
 arch/x86/kernel/paravirt.c            |  2 --
 arch/x86/kernel/smpboot.c             |  4 ++--
 arch/x86/kernel/vmi_32.c              |  4 ++--
 arch/x86/kernel/x86_init.c            |  9 +++++++++
 arch/x86/xen/enlighten.c              |  4 ++--
 11 files changed, 42 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index bb7d4792584..6f15b29005a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -70,9 +70,6 @@ static inline void default_inquire_remote_apic(int apicid)
  */
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
-#else
-#define setup_boot_clock setup_boot_APIC_clock
-#define setup_secondary_clock setup_secondary_APIC_clock
 #endif
 
 #ifdef CONFIG_X86_64
@@ -245,6 +242,8 @@ static inline void lapic_shutdown(void) { }
 static inline void init_apic_mappings(void) { }
 static inline void disable_local_APIC(void) { }
 static inline void apic_disable(void) { }
+# define setup_boot_APIC_clock x86_init_noop
+# define setup_secondary_APIC_clock x86_init_noop
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 7ce415e844b..825674a968d 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -333,18 +333,6 @@ static inline void slow_down_io(void)
 #endif
 }
 
-#ifdef CONFIG_X86_LOCAL_APIC
-static inline void setup_boot_clock(void)
-{
-	PVOP_VCALL0(pv_apic_ops.setup_boot_clock);
-}
-
-static inline void setup_secondary_clock(void)
-{
-	PVOP_VCALL0(pv_apic_ops.setup_secondary_clock);
-}
-#endif
-
 #ifdef CONFIG_SMP
 static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 				    unsigned long start_esp)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index ecc74e5ad40..1da89276d14 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -218,9 +218,6 @@ struct pv_irq_ops {
 
 struct pv_apic_ops {
 #ifdef CONFIG_X86_LOCAL_APIC
-	void (*setup_boot_clock)(void);
-	void (*setup_secondary_clock)(void);
-
 	void (*startup_ipi_hook)(int phys_apicid,
 				 unsigned long start_eip,
 				 unsigned long start_esp);
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index b9bb4faefc4..b7d258f4c40 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -78,6 +78,15 @@ struct x86_init_paging {
 	void (*pagetable_setup_done)(pgd_t *base);
 };
 
+/**
+ * struct x86_init_timers - platform specific timer setup
+ * @setup_perpcu_clockev:	set up the per cpu clock event device for the
+ *				boot cpu
+ */
+struct x86_init_timers {
+	void (*setup_percpu_clockev)(void);
+};
+
 /**
  * struct x86_init_ops - functions for platform specific setup
  *
@@ -88,9 +97,19 @@ struct x86_init_ops {
 	struct x86_init_irqs		irqs;
 	struct x86_init_oem		oem;
 	struct x86_init_paging		paging;
+	struct x86_init_timers		timers;
+};
+
+/**
+ * struct x86_cpuinit_ops - platform specific cpu hotplug setups
+ * @setup_percpu_clockev:	set up the per cpu clock event device
+ */
+struct x86_cpuinit_ops {
+	void (*setup_percpu_clockev)(void);
 };
 
 extern struct x86_init_ops x86_init;
+extern struct x86_cpuinit_ops x86_cpuinit;
 
 extern void x86_init_noop(void);
 extern void x86_init_uint_noop(unsigned int unused);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0a1c2830ec6..ce0098066e9 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -36,6 +36,7 @@
 #include <linux/mm.h>
 
 #include <asm/perf_counter.h>
+#include <asm/x86_init.h>
 #include <asm/pgalloc.h>
 #include <asm/atomic.h>
 #include <asm/mpspec.h>
@@ -1701,7 +1702,7 @@ int __init APIC_init_uniprocessor(void)
 	localise_nmi_watchdog();
 #endif
 
-	setup_boot_clock();
+	x86_init.timers.setup_percpu_clockev();
 #ifdef CONFIG_X86_64
 	check_nmi_watchdog();
 #endif
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 223af43f152..64e9b5f59d2 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -22,6 +22,8 @@
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <linux/percpu.h>
+
+#include <asm/x86_init.h>
 #include <asm/reboot.h>
 
 #define KVM_SCALE 22
@@ -187,7 +189,8 @@ void __init kvmclock_init(void)
 		pv_time_ops.sched_clock = kvm_clock_read;
 		pv_time_ops.get_tsc_khz = kvm_get_tsc_khz;
 #ifdef CONFIG_X86_LOCAL_APIC
-		pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock;
+		x86_cpuinit.setup_percpu_clockev =
+			kvm_setup_secondary_clock;
 #endif
 #ifdef CONFIG_SMP
 		smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 8167be0b68c..1ed32c79679 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -387,8 +387,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
-	.setup_boot_clock = setup_boot_APIC_clock,
-	.setup_secondary_clock = setup_secondary_APIC_clock,
 	.startup_ipi_hook = paravirt_nop,
 #endif
 };
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda69ee6..6eb81a87b4b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -323,7 +323,7 @@ notrace static void __cpuinit start_secondary(void *unused)
 	/* enable local interrupts */
 	local_irq_enable();
 
-	setup_secondary_clock();
+	x86_cpuinit.setup_percpu_clockev();
 
 	wmb();
 	cpu_idle();
@@ -1112,7 +1112,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 	printk(KERN_INFO "CPU%d: ", 0);
 	print_cpu_info(&cpu_data(0));
-	setup_boot_clock();
+	x86_init.timers.setup_percpu_clockev();
 
 	if (is_uv_system())
 		uv_system_init();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 95a7289e4b0..b43b6685cae 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -821,8 +821,8 @@ static inline int __init activate_vmi(void)
 		pv_time_ops.get_wallclock = vmi_get_wallclock;
 		pv_time_ops.set_wallclock = vmi_set_wallclock;
 #ifdef CONFIG_X86_LOCAL_APIC
-		pv_apic_ops.setup_boot_clock = vmi_time_bsp_init;
-		pv_apic_ops.setup_secondary_clock = vmi_time_ap_init;
+		x86_init.timers.setup_percpu_clockev = vmi_time_bsp_init;
+		x86_cpuinit.setup_percpu_clockev = vmi_time_ap_init;
 #endif
 		pv_time_ops.sched_clock = vmi_sched_clock;
 		pv_time_ops.get_tsc_khz = vmi_tsc_khz;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 7df020e6740..e666a98db7c 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -9,6 +9,7 @@
 #include <asm/paravirt.h>
 #include <asm/mpspec.h>
 #include <asm/setup.h>
+#include <asm/apic.h>
 #include <asm/e820.h>
 #include <asm/irq.h>
 
@@ -54,4 +55,12 @@ struct __initdata x86_init_ops x86_init = {
 		.pagetable_setup_start	= native_pagetable_setup_start,
 		.pagetable_setup_done	= native_pagetable_setup_done,
 	},
+
+	.timers = {
+		.setup_percpu_clockev	= setup_boot_APIC_clock,
+	},
+};
+
+__cpuinitdata struct x86_cpuinit_ops x86_cpuinit = {
+	.setup_percpu_clockev		= setup_secondary_APIC_clock,
 };
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index a924caa168d..14e597e0c16 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -912,8 +912,6 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
-	.setup_boot_clock = paravirt_nop,
-	.setup_secondary_clock = paravirt_nop,
 	.startup_ipi_hook = paravirt_nop,
 #endif
 };
@@ -979,6 +977,8 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_init.resources.memory_setup = xen_memory_setup;
 	x86_init.oem.arch_setup = xen_arch_setup;
 	x86_init.oem.banner = xen_banner;
+	x86_init.timers.setup_percpu_clockev = x86_init_noop;
+	x86_cpuinit.setup_percpu_clockev = x86_init_noop;
 
 #ifdef CONFIG_X86_64
 	/*
-- 
cgit v1.2.3


From 845b3944bbdf9e9247849bf037f27ff3a3f26d87 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 19 Aug 2009 15:37:03 +0200
Subject: x86: Add timer_init to x86_init_ops

The timer init code is convoluted with several quirks and the paravirt
timer chooser. Figuring out which code path is actually taken is not
for the faint hearted.

Move the numaq TSC quirk to tsc_pre_init x86_init_ops function and
replace the paravirt time chooser and the remaining x86 quirk with a
simple x86_init_ops function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/paravirt.h       |  5 ----
 arch/x86/include/asm/paravirt_types.h |  2 --
 arch/x86/include/asm/setup.h          | 21 ++---------------
 arch/x86/include/asm/time.h           |  1 -
 arch/x86/include/asm/timer.h          |  3 +--
 arch/x86/include/asm/x86_init.h       |  4 ++++
 arch/x86/kernel/apic/numaq_32.c       | 10 ++------
 arch/x86/kernel/paravirt.c            |  1 -
 arch/x86/kernel/setup.c               | 43 -----------------------------------
 arch/x86/kernel/time_32.c             | 34 ++++++++++++++++++---------
 arch/x86/kernel/time_64.c             |  9 ++++++--
 arch/x86/kernel/tsc.c                 |  2 ++
 arch/x86/kernel/visws_quirks.c        | 20 ++++------------
 arch/x86/kernel/vmi_32.c              |  2 +-
 arch/x86/kernel/x86_init.c            |  3 +++
 arch/x86/lguest/boot.c                |  2 +-
 arch/x86/xen/enlighten.c              |  4 ++--
 17 files changed, 53 insertions(+), 113 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 825674a968d..11a4ba7b209 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -34,11 +34,6 @@ static inline int set_wallclock(unsigned long nowtime)
 	return PVOP_CALL1(int, pv_time_ops.set_wallclock, nowtime);
 }
 
-static inline void (*choose_time_init(void))(void)
-{
-	return pv_time_ops.time_init;
-}
-
 /* The paravirtualized CPUID instruction. */
 static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
 			   unsigned int *ecx, unsigned int *edx)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 1da89276d14..0d812e592e3 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -88,8 +88,6 @@ struct pv_lazy_ops {
 };
 
 struct pv_time_ops {
-	void (*time_init)(void);
-
 	/* Set and set time of day */
 	unsigned long (*get_wallclock)(void);
 	int (*set_wallclock)(unsigned long);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 58b58952b80..861e1fe2303 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -5,24 +5,6 @@
 
 #define COMMAND_LINE_SIZE 2048
 
-#ifndef __ASSEMBLY__
-
-#include <asm/x86_init.h>
-
-/*
- * Any setup quirks to be performed?
- */
-
-struct x86_quirks {
-	int (*arch_pre_time_init)(void);
-	int (*arch_time_init)(void);
-};
-
-extern void x86_quirk_pre_time_init(void);
-extern void x86_quirk_time_init(void);
-
-#endif /* __ASSEMBLY__ */
-
 #ifdef __i386__
 
 #include <linux/pfn.h>
@@ -42,6 +24,7 @@ extern void x86_quirk_time_init(void);
 
 #ifndef __ASSEMBLY__
 #include <asm/bootparam.h>
+#include <asm/x86_init.h>
 
 /* Interrupt control for vSMPowered x86_64 systems */
 #ifdef CONFIG_X86_64
@@ -60,11 +43,11 @@ static inline void visws_early_detect(void) { }
 static inline int is_visws_box(void) { return 0; }
 #endif
 
-extern struct x86_quirks *x86_quirks;
 extern unsigned long saved_video_mode;
 
 extern void reserve_standard_io_resources(void);
 extern void i386_reserve_resources(void);
+extern void setup_default_timer_irq(void);
 
 #ifndef _SETUP
 
diff --git a/arch/x86/include/asm/time.h b/arch/x86/include/asm/time.h
index 50c733aac42..91bb162b5a3 100644
--- a/arch/x86/include/asm/time.h
+++ b/arch/x86/include/asm/time.h
@@ -54,7 +54,6 @@ extern void time_init(void);
 
 #define get_wallclock() native_get_wallclock()
 #define set_wallclock(x) native_set_wallclock(x)
-#define choose_time_init() hpet_time_init
 
 #endif /* CONFIG_PARAVIRT */
 
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index 20ca9c4d468..e854c7ab416 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -12,8 +12,7 @@ unsigned long native_calibrate_tsc(void);
 
 #ifdef CONFIG_X86_32
 extern int timer_ack;
-extern irqreturn_t timer_interrupt(int irq, void *dev_id);
-#endif /* CONFIG_X86_32 */
+#endif
 extern int recalibrate_cpu_khz(void);
 
 extern int no_timer_check;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index b7d258f4c40..f8bdd2271a0 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -82,9 +82,13 @@ struct x86_init_paging {
  * struct x86_init_timers - platform specific timer setup
  * @setup_perpcu_clockev:	set up the per cpu clock event device for the
  *				boot cpu
+ * @tsc_pre_init:		platform function called before TSC init
+ * @timer_init:			initialize the platform timer (default PIT/HPET)
  */
 struct x86_init_timers {
 	void (*setup_percpu_clockev)(void);
+	void (*tsc_pre_init)(void);
+	void (*timer_init)(void);
 };
 
 /**
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 71c5ea64586..f1ebed6bd15 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -129,10 +129,9 @@ void __cpuinit numaq_tsc_disable(void)
 	}
 }
 
-static int __init numaq_pre_time_init(void)
+static void __init numaq_tsc_init(void)
 {
 	numaq_tsc_disable();
-	return 0;
 }
 
 static inline int generate_logical_apicid(int quad, int phys_apicid)
@@ -262,11 +261,6 @@ static void __init smp_read_mpc_oem(struct mpc_table *mpc)
 	}
 }
 
-static struct x86_quirks numaq_x86_quirks __initdata = {
-	.arch_pre_time_init		= numaq_pre_time_init,
-	.arch_time_init			= NULL,
-};
-
 static __init void early_check_numaq(void)
 {
 	/*
@@ -281,13 +275,13 @@ static __init void early_check_numaq(void)
 		early_get_smp_config();
 
 	if (found_numaq) {
-		x86_quirks = &numaq_x86_quirks;
 		x86_init.mpparse.mpc_record = numaq_mpc_record;
 		x86_init.mpparse.setup_ioapic_ids = x86_init_noop;
 		x86_init.mpparse.mpc_apic_id = mpc_apic_id;
 		x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem;
 		x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus;
 		x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info;
+		x86_init.timers.tsc_pre_init = numaq_tsc_init;
 	}
 }
 
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 1ed32c79679..9c0e644a76d 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -306,7 +306,6 @@ struct pv_init_ops pv_init_ops = {
 };
 
 struct pv_time_ops pv_time_ops = {
-	.time_init = hpet_time_init,
 	.get_wallclock = native_get_wallclock,
 	.set_wallclock = native_set_wallclock,
 	.sched_clock = native_sched_clock,
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 43ec6aa175b..bb207a47c63 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -626,10 +626,6 @@ static int __init setup_elfcorehdr(char *arg)
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
-static struct x86_quirks default_x86_quirks __initdata;
-
-struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
-
 #ifdef CONFIG_X86_RESERVE_LOW_64K
 static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
 {
@@ -1016,45 +1012,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_X86_32
 
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
-	.name = "timer"
-};
-
-/**
- * x86_quirk_pre_time_init - do any specific initialisations before.
- *
- **/
-void __init x86_quirk_pre_time_init(void)
-{
-	if (x86_quirks->arch_pre_time_init)
-		x86_quirks->arch_pre_time_init();
-}
-
-/**
- * x86_quirk_time_init - do any specific initialisations for the system timer.
- *
- * Description:
- *	Must plug the system timer interrupt source at HZ into the IRQ listed
- *	in irq_vectors.h:TIMER_IRQ
- **/
-void __init x86_quirk_time_init(void)
-{
-	if (x86_quirks->arch_time_init) {
-		/*
-		 * A nonzero return code does not mean failure, it means
-		 * that the architecture quirk does not want any
-		 * generic (timer) setup to be performed after this:
-		 */
-		if (x86_quirks->arch_time_init())
-			return;
-	}
-
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
 static struct resource video_ram_resource = {
 	.name	= "Video RAM area",
 	.start	= 0xa0000,
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 5c5d87f0b2e..89bbb52218b 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -72,7 +72,7 @@ EXPORT_SYMBOL(profile_pc);
  * Time Stamp Counter value at the time of the timer interrupt, so that
  * we later on can estimate the time of day more exactly.
  */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	/* Keep nmi watchdog up to date */
 	inc_irq_stat(irq0_irqs);
@@ -113,25 +113,37 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Duplicate of time_init() below, with hpet_enable part added */
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
+	.name = "timer"
+};
+
+void __init setup_default_timer_irq(void)
+{
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+/* Default timer init function */
 void __init hpet_time_init(void)
 {
 	if (!hpet_enable())
 		setup_pit_timer();
-	x86_quirk_time_init();
+	setup_default_timer_irq();
+}
+
+static void x86_late_time_init(void)
+{
+	x86_init.timers.timer_init();
 }
 
 /*
- * This is called directly from init code; we must delay timer setup in the
- * HPET case as we can't make the decision to turn on HPET this early in the
- * boot process.
- *
- * The chosen time_init function will usually be hpet_time_init, above, but
- * in the case of virtual hardware, an alternative function may be substituted.
+ * Initialize TSC and delay the periodic timer init to
+ * late x86_late_time_init() so ioremap works.
  */
 void __init time_init(void)
 {
-	x86_quirk_pre_time_init();
 	tsc_init();
-	late_time_init = choose_time_init();
+	late_time_init = x86_late_time_init;
 }
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 5ba343e6184..38a7df94c10 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -19,6 +19,7 @@
 #include <linux/mca.h>
 #include <linux/nmi.h>
 
+#include <asm/x86_init.h>
 #include <asm/i8253.h>
 #include <asm/hpet.h>
 #include <asm/vgtod.h>
@@ -127,9 +128,13 @@ void __init hpet_time_init(void)
 	setup_irq(0, &irq0);
 }
 
+static void x86_late_time_init(void)
+{
+	x86_init.timers.timer_init();
+}
+
 void __init time_init(void)
 {
 	tsc_init();
-
-	late_time_init = choose_time_init();
+	late_time_init = x86_late_time_init;
 }
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 71f4368b357..652bc214eeb 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -857,6 +857,8 @@ void __init tsc_init(void)
 	u64 lpj;
 	int cpu;
 
+	x86_init.timers.tsc_pre_init();
+
 	if (!cpu_has_tsc)
 		return;
 
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index 2719091b335..f068553a1b1 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -30,6 +30,7 @@
 #include <asm/setup.h>
 #include <asm/apic.h>
 #include <asm/e820.h>
+#include <asm/time.h>
 #include <asm/io.h>
 
 #include <linux/kernel_stat.h>
@@ -53,7 +54,7 @@ int is_visws_box(void)
 	return visws_board_type >= 0;
 }
 
-static int __init visws_time_init(void)
+static void __init visws_time_init(void)
 {
 	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
 
@@ -66,11 +67,7 @@ static int __init visws_time_init(void)
 	/* Enable (unmask) the timer interrupt */
 	co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
 
-	/*
-	 * Zero return means the generic timer setup code will set up
-	 * the standard vector:
-	 */
-	return 0;
+	setup_default_timer_irq();
 }
 
 /* Replaces the default init_ISA_irqs in the generic setup */
@@ -226,10 +223,6 @@ static void __init visws_find_smp_config(unsigned int reserve)
 
 static void visws_trap_init(void);
 
-static struct x86_quirks visws_x86_quirks __initdata = {
-	.arch_time_init		= visws_time_init,
-};
-
 void __init visws_early_detect(void)
 {
 	int raw;
@@ -241,17 +234,14 @@ void __init visws_early_detect(void)
 		return;
 
 	/*
-	 * Install special quirks for timer, interrupt and memory setup:
-	 * Fall back to generic behavior for traps:
-	 * Override generic MP-table parsing:
+	 * Override the default platform setup functions
 	 */
-	x86_quirks = &visws_x86_quirks;
-
 	x86_init.resources.memory_setup = visws_memory_setup;
 	x86_init.mpparse.get_smp_config = visws_get_smp_config;
 	x86_init.mpparse.find_smp_config = visws_find_smp_config;
 	x86_init.irqs.pre_vector_init = visws_pre_intr_init;
 	x86_init.irqs.trap_init = visws_trap_init;
+	x86_init.timers.timer_init = visws_time_init;
 
 	/*
 	 * Install reboot quirks:
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b43b6685cae..cd7d0fbbf66 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -817,7 +817,7 @@ static inline int __init activate_vmi(void)
 		vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm);
 		vmi_timer_ops.cancel_alarm =
 			 vmi_get_function(VMI_CALL_CancelAlarm);
-		pv_time_ops.time_init = vmi_time_init;
+		x86_init.timers.timer_init = vmi_time_init;
 		pv_time_ops.get_wallclock = vmi_get_wallclock;
 		pv_time_ops.set_wallclock = vmi_set_wallclock;
 #ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e666a98db7c..4790b92714a 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -11,6 +11,7 @@
 #include <asm/setup.h>
 #include <asm/apic.h>
 #include <asm/e820.h>
+#include <asm/time.h>
 #include <asm/irq.h>
 
 void __cpuinit x86_init_noop(void) { }
@@ -58,6 +59,8 @@ struct __initdata x86_init_ops x86_init = {
 
 	.timers = {
 		.setup_percpu_clockev	= setup_boot_APIC_clock,
+		.tsc_pre_init		= x86_init_noop,
+		.timer_init		= hpet_time_init,
 	},
 };
 
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 1ff986511f1..6caa8c0c793 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1320,11 +1320,11 @@ __init void lguest_init(void)
 
 	/* Time operations */
 	pv_time_ops.get_wallclock = lguest_get_wallclock;
-	pv_time_ops.time_init = lguest_time_init;
 	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
 	x86_init.resources.memory_setup = lguest_memory_setup;
 	x86_init.irqs.intr_init = lguest_init_IRQ;
+	x86_init.timers.timer_init = lguest_time_init;
 
 	/*
 	 * Now is a good time to look at the implementations of these functions
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 14e597e0c16..84826b842b5 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -842,8 +842,6 @@ static const struct pv_init_ops xen_init_ops __initdata = {
 };
 
 static const struct pv_time_ops xen_time_ops __initdata = {
-	.time_init = xen_time_init,
-
 	.set_wallclock = xen_set_wallclock,
 	.get_wallclock = xen_get_wallclock,
 	.get_tsc_khz = xen_tsc_khz,
@@ -977,6 +975,8 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_init.resources.memory_setup = xen_memory_setup;
 	x86_init.oem.arch_setup = xen_arch_setup;
 	x86_init.oem.banner = xen_banner;
+
+	x86_init.timers.timer_init = xen_time_init;
 	x86_init.timers.setup_percpu_clockev = x86_init_noop;
 	x86_cpuinit.setup_percpu_clockev = x86_init_noop;
 
-- 
cgit v1.2.3


From ecce85089e6d31eed7535b68f5acdd194265690c Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 15:28:50 +0200
Subject: x86: Remove do_timer hook

This is a left over of the old x86 sub arch support. Remove it and
open code it like we do in time_64.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/do_timer.h | 16 ----------------
 arch/x86/kernel/time_32.c       |  7 ++++---
 2 files changed, 4 insertions(+), 19 deletions(-)
 delete mode 100644 arch/x86/include/asm/do_timer.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/do_timer.h b/arch/x86/include/asm/do_timer.h
deleted file mode 100644
index 23ecda0b28a..00000000000
--- a/arch/x86/include/asm/do_timer.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* defines for inline arch setup functions */
-#include <linux/clockchips.h>
-
-#include <asm/i8259.h>
-#include <asm/i8253.h>
-
-/**
- * do_timer_interrupt_hook - hook into timer tick
- *
- * Call the pit clock event handler. see asm/i8253.h
- **/
-
-static inline void do_timer_interrupt_hook(void)
-{
-	global_clock_event->event_handler(global_clock_event);
-}
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 89bbb52218b..6fef4ea1e7a 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -28,6 +28,7 @@
  *	serialize accesses to xtime/lost_ticks).
  */
 
+#include <linux/clockchips.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/time.h>
@@ -37,8 +38,8 @@
 #include <asm/hpet.h>
 #include <asm/time.h>
 #include <asm/timer.h>
-
-#include <asm/do_timer.h>
+#include <asm/i8259.h>
+#include <asm/i8253.h>
 
 int timer_ack;
 
@@ -92,7 +93,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	}
 #endif
 
-	do_timer_interrupt_hook();
+	global_clock_event->event_handler(global_clock_event);
 
 #ifdef CONFIG_MCA
 	if (MCA_bus) {
-- 
cgit v1.2.3


From dd3e6e8c6e7a2294f137c4dbccb3e73e7fa8ba15 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 15:35:23 +0200
Subject: x86: Prepare unification of time_32/64.c

Unify the top comment and the includes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/time_32.c | 44 +++++++++++++-------------------------------
 arch/x86/kernel/time_64.c | 13 +++++--------
 2 files changed, 18 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 6fef4ea1e7a..acbaefd61e8 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -1,45 +1,27 @@
 /*
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ *  Copyright (c) 1991,1992,1995  Linus Torvalds
+ *  Copyright (c) 1994  Alan Modra
+ *  Copyright (c) 1995  Markus Kuhn
+ *  Copyright (c) 1996  Ingo Molnar
+ *  Copyright (c) 1998  Andrea Arcangeli
+ *  Copyright (c) 2002,2006  Vojtech Pavlik
+ *  Copyright (c) 2003  Andi Kleen
  *
- * This file contains the PC-specific time handling details:
- * reading the RTC at bootup, etc..
- * 1994-07-02    Alan Modra
- *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
- * 1995-03-26    Markus Kuhn
- *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
- *      precision CMOS clock update
- * 1996-05-03    Ingo Molnar
- *      fixed time warps in do_[slow|fast]_gettimeoffset()
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- * 1998-09-05    (Various)
- *	More robust do_fast_gettimeoffset() algorithm implemented
- *	(works with APM, Cyrix 6x86MX and Centaur C6),
- *	monotonic gettimeofday() with fast_get_timeoffset(),
- *	drift-proof precision TSC calibration on boot
- *	(C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D.
- *	Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>;
- *	ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>).
- * 1998-12-16    Andrea Arcangeli
- *	Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy
- *	because was not accounting lost_ticks.
- * 1998-12-24 Copyright (C) 1998  Andrea Arcangeli
- *	Fixed a xtime SMP race (we need the xtime_lock rw spinlock to
- *	serialize accesses to xtime/lost_ticks).
  */
 
 #include <linux/clockchips.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/mca.h>
 
-#include <asm/setup.h>
-#include <asm/hpet.h>
-#include <asm/time.h>
-#include <asm/timer.h>
+#include <asm/vsyscall.h>
+#include <asm/x86_init.h>
 #include <asm/i8259.h>
 #include <asm/i8253.h>
+#include <asm/timer.h>
+#include <asm/hpet.h>
+#include <asm/time.h>
+#include <asm/nmi.h>
 
 int timer_ack;
 
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 38a7df94c10..45914f8844a 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -1,6 +1,4 @@
 /*
- *  "High Precision Event Timer" based timekeeping.
- *
  *  Copyright (c) 1991,1992,1995  Linus Torvalds
  *  Copyright (c) 1994  Alan Modra
  *  Copyright (c) 1995  Markus Kuhn
@@ -8,23 +6,22 @@
  *  Copyright (c) 1998  Andrea Arcangeli
  *  Copyright (c) 2002,2006  Vojtech Pavlik
  *  Copyright (c) 2003  Andi Kleen
- *  RTC support code taken from arch/i386/kernel/timers/time_hpet.c
+ *
  */
 
 #include <linux/clockchips.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <linux/time.h>
 #include <linux/mca.h>
-#include <linux/nmi.h>
 
+#include <asm/vsyscall.h>
 #include <asm/x86_init.h>
+#include <asm/i8259.h>
 #include <asm/i8253.h>
+#include <asm/timer.h>
 #include <asm/hpet.h>
-#include <asm/vgtod.h>
 #include <asm/time.h>
-#include <asm/timer.h>
+#include <asm/nmi.h>
 
 volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
 
-- 
cgit v1.2.3


From 64fcbac1f38882d8ae82c44a1c2a676cfa5e79e1 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 15:54:21 +0200
Subject: x86: Simplify timer_ack magic in time_32.c

Let the compiler optimize the timer_ack magic away in the 32bit timer
interrupt and put the same code into time_64.c. It's optimized out for
CONFIG_X86_IO_APIC on 32bit and for 64bit because timer_ack is const 0
in both cases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/timer.h |  6 ++++--
 arch/x86/kernel/time_32.c    |  5 +++--
 arch/x86/kernel/time_64.c    | 14 ++++++++++++++
 3 files changed, 21 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index e854c7ab416..65228ccc5f0 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -9,11 +9,13 @@
 
 unsigned long long native_sched_clock(void);
 unsigned long native_calibrate_tsc(void);
+extern int recalibrate_cpu_khz(void);
 
-#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
 extern int timer_ack;
+#else
+# define timer_ack (0)
 #endif
-extern int recalibrate_cpu_khz(void);
 
 extern int no_timer_check;
 
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index acbaefd61e8..7a26bcf887f 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -23,7 +23,9 @@
 #include <asm/time.h>
 #include <asm/nmi.h>
 
+#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
 int timer_ack;
+#endif
 
 unsigned long profile_pc(struct pt_regs *regs)
 {
@@ -60,7 +62,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	/* Keep nmi watchdog up to date */
 	inc_irq_stat(irq0_irqs);
 
-#ifdef CONFIG_X86_IO_APIC
+	/* Optimized out for !IO_APIC and x86_64 */
 	if (timer_ack) {
 		/*
 		 * Subtle, when I/O APICs are used we have to ack timer IRQ
@@ -73,7 +75,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 		inb(PIC_MASTER_POLL);
 		spin_unlock(&i8259A_lock);
 	}
-#endif
 
 	global_clock_event->event_handler(global_clock_event);
 
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 45914f8844a..35e0a925da5 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -51,6 +51,20 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	inc_irq_stat(irq0_irqs);
 
+	/* Optimized out for !IO_APIC and x86_64 */
+	if (timer_ack) {
+		/*
+		 * Subtle, when I/O APICs are used we have to ack timer IRQ
+		 * manually to deassert NMI lines for the watchdog if run
+		 * on an 82489DX-based system.
+		 */
+		spin_lock(&i8259A_lock);
+		outb(0x0c, PIC_MASTER_OCW3);
+		/* Ack the IRQ; AEOI will end it automatically. */
+		inb(PIC_MASTER_POLL);
+		spin_unlock(&i8259A_lock);
+	}
+
 	global_clock_event->event_handler(global_clock_event);
 
 #ifdef CONFIG_MCA
-- 
cgit v1.2.3


From 0be6939422eb2f54df4b3d8763c569c6759c1a42 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 15:59:35 +0200
Subject: x86: Remove mca bus ifdef from timer interrupt

MCA_bus is constant 0 when CONFIG_MCA=n. So the compiler removes that
code w/o needing an extra #ifdef

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/time_32.c | 18 +++---------------
 arch/x86/kernel/time_64.c |  9 +++------
 2 files changed, 6 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 7a26bcf887f..ec729cdcfa3 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -78,21 +78,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 	global_clock_event->event_handler(global_clock_event);
 
-#ifdef CONFIG_MCA
-	if (MCA_bus) {
-		/* The PS/2 uses level-triggered interrupts.  You can't
-		turn them off, nor would you want to (any attempt to
-		enable edge-triggered interrupts usually gets intercepted by a
-		special hardware circuit).  Hence we have to acknowledge
-		the timer interrupt.  Through some incredibly stupid
-		design idea, the reset for IRQ 0 is done by setting the
-		high bit of the PPI port B (0x61).  Note that some PS/2s,
-		notably the 55SX, work fine if this is removed.  */
-
-		u8 irq_v = inb_p(0x61);		/* read the current state */
-		outb_p(irq_v | 0x80, 0x61);	/* reset the IRQ */
-	}
-#endif
+	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
+	if (MCA_bus)
+		outb_p(inb_p(0x61)| 0x80, 0x61);
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 35e0a925da5..7db3912b869 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -67,12 +67,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 	global_clock_event->event_handler(global_clock_event);
 
-#ifdef CONFIG_MCA
-	if (MCA_bus) {
-		u8 irq_v = inb_p(0x61);       /* read the current state */
-		outb_p(irq_v|0x80, 0x61);     /* reset the IRQ */
-	}
-#endif
+	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
+	if (MCA_bus)
+		outb_p(inb_p(0x61)| 0x80, 0x61);
 
 	return IRQ_HANDLED;
 }
-- 
cgit v1.2.3


From 454ede7eebf91b92ab1eafe10c6b6ed04de29bf8 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 16:07:40 +0200
Subject: x86: Make timer setup and global variables the same in time_32/64.c

The timer and timer irq setup code is identical in 32 and 64 bit. Make
it the same formatting as well. Also add the global variables under
the necessary ifdefs to both files.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/time_32.c |  8 +++++---
 arch/x86/kernel/time_64.c | 38 ++++++++++++++++++++++++++++++--------
 2 files changed, 35 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index ec729cdcfa3..186abc577b2 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -27,6 +27,10 @@
 int timer_ack;
 #endif
 
+#ifdef CONFIG_X86_64
+volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
+#endif
+
 unsigned long profile_pc(struct pt_regs *regs)
 {
 	unsigned long pc = instruction_pointer(regs);
@@ -53,9 +57,7 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 
 /*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
+ * Default timer interrupt handler for PIT/HPET
  */
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 7db3912b869..78cbdf5c006 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -23,7 +23,13 @@
 #include <asm/time.h>
 #include <asm/nmi.h>
 
+#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
+int timer_ack;
+#endif
+
+#ifdef CONFIG_X86_64
 volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
+#endif
 
 unsigned long profile_pc(struct pt_regs *regs)
 {
@@ -47,8 +53,12 @@ unsigned long profile_pc(struct pt_regs *regs)
 }
 EXPORT_SYMBOL(profile_pc);
 
+/*
+ * Default timer interrupt handler for PIT/HPET
+ */
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
+	/* Keep nmi watchdog up to date */
 	inc_irq_stat(irq0_irqs);
 
 	/* Optimized out for !IO_APIC and x86_64 */
@@ -74,8 +84,10 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* calibrate_cpu is used on systems with fixed rate TSCs to determine
- * processor frequency */
+/*
+ * calibrate_cpu is used on systems with fixed rate TSCs to determine
+ * processor frequency
+ */
 #define TICK_COUNT 100000000
 unsigned long __init calibrate_cpu(void)
 {
@@ -122,18 +134,24 @@ unsigned long __init calibrate_cpu(void)
 	return pmc_now * tsc_khz / (tsc_now - tsc_start);
 }
 
-static struct irqaction irq0 = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING | IRQF_TIMER,
-	.name		= "timer"
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
+	.name = "timer"
 };
 
+void __init setup_default_timer_irq(void)
+{
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+/* Default timer init function */
 void __init hpet_time_init(void)
 {
 	if (!hpet_enable())
 		setup_pit_timer();
-
-	setup_irq(0, &irq0);
+	setup_default_timer_irq();
 }
 
 static void x86_late_time_init(void)
@@ -141,6 +159,10 @@ static void x86_late_time_init(void)
 	x86_init.timers.timer_init();
 }
 
+/*
+ * Initialize TSC and delay the periodic timer init to
+ * late x86_late_time_init() so ioremap works.
+ */
 void __init time_init(void)
 {
 	tsc_init();
-- 
cgit v1.2.3


From 08047c4f1740c7cee75d58e2919d48c09f951649 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 16:27:41 +0200
Subject: x86: Move calibrate_cpu to tsc.c

Move the code where it's only user is. Also we need to look whether
this hardwired hackery might interfere with perfcounters.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/time.h |  2 --
 arch/x86/kernel/time_32.c   |  1 -
 arch/x86/kernel/time_64.c   | 51 ----------------------------------------
 arch/x86/kernel/tsc.c       | 57 +++++++++++++++++++++++++++++++++++++++++++--
 4 files changed, 55 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/time.h b/arch/x86/include/asm/time.h
index 91bb162b5a3..9c5608b21c2 100644
--- a/arch/x86/include/asm/time.h
+++ b/arch/x86/include/asm/time.h
@@ -57,6 +57,4 @@ extern void time_init(void);
 
 #endif /* CONFIG_PARAVIRT */
 
-extern unsigned long __init calibrate_cpu(void);
-
 #endif /* _ASM_X86_TIME_H */
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 186abc577b2..fd876cc7748 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -21,7 +21,6 @@
 #include <asm/timer.h>
 #include <asm/hpet.h>
 #include <asm/time.h>
-#include <asm/nmi.h>
 
 #if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
 int timer_ack;
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index 78cbdf5c006..e59a40ebff1 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -21,7 +21,6 @@
 #include <asm/timer.h>
 #include <asm/hpet.h>
 #include <asm/time.h>
-#include <asm/nmi.h>
 
 #if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
 int timer_ack;
@@ -84,56 +83,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/*
- * calibrate_cpu is used on systems with fixed rate TSCs to determine
- * processor frequency
- */
-#define TICK_COUNT 100000000
-unsigned long __init calibrate_cpu(void)
-{
-	int tsc_start, tsc_now;
-	int i, no_ctr_free;
-	unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
-	unsigned long flags;
-
-	for (i = 0; i < 4; i++)
-		if (avail_to_resrv_perfctr_nmi_bit(i))
-			break;
-	no_ctr_free = (i == 4);
-	if (no_ctr_free) {
-		WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
-		     "cpu_khz value may be incorrect.\n");
-		i = 3;
-		rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
-		wrmsrl(MSR_K7_EVNTSEL3, 0);
-		rdmsrl(MSR_K7_PERFCTR3, pmc3);
-	} else {
-		reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-		reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
-	}
-	local_irq_save(flags);
-	/* start measuring cycles, incrementing from 0 */
-	wrmsrl(MSR_K7_PERFCTR0 + i, 0);
-	wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
-	rdtscl(tsc_start);
-	do {
-		rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
-		tsc_now = get_cycles();
-	} while ((tsc_now - tsc_start) < TICK_COUNT);
-
-	local_irq_restore(flags);
-	if (no_ctr_free) {
-		wrmsrl(MSR_K7_EVNTSEL3, 0);
-		wrmsrl(MSR_K7_PERFCTR3, pmc3);
-		wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
-	} else {
-		release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
-		release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
-	}
-
-	return pmc_now * tsc_khz / (tsc_now - tsc_start);
-}
-
 static struct irqaction irq0  = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 652bc214eeb..97a0bcbad10 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -17,6 +17,7 @@
 #include <asm/time.h>
 #include <asm/delay.h>
 #include <asm/hypervisor.h>
+#include <asm/nmi.h>
 
 unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
@@ -852,6 +853,60 @@ static void __init init_tsc_clocksource(void)
 	clocksource_register(&clocksource_tsc);
 }
 
+#ifdef CONFIG_X86_64
+/*
+ * calibrate_cpu is used on systems with fixed rate TSCs to determine
+ * processor frequency
+ */
+#define TICK_COUNT 100000000
+static unsigned long __init calibrate_cpu(void)
+{
+	int tsc_start, tsc_now;
+	int i, no_ctr_free;
+	unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
+	unsigned long flags;
+
+	for (i = 0; i < 4; i++)
+		if (avail_to_resrv_perfctr_nmi_bit(i))
+			break;
+	no_ctr_free = (i == 4);
+	if (no_ctr_free) {
+		WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
+		     "cpu_khz value may be incorrect.\n");
+		i = 3;
+		rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
+		wrmsrl(MSR_K7_EVNTSEL3, 0);
+		rdmsrl(MSR_K7_PERFCTR3, pmc3);
+	} else {
+		reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+		reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+	}
+	local_irq_save(flags);
+	/* start measuring cycles, incrementing from 0 */
+	wrmsrl(MSR_K7_PERFCTR0 + i, 0);
+	wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
+	rdtscl(tsc_start);
+	do {
+		rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
+		tsc_now = get_cycles();
+	} while ((tsc_now - tsc_start) < TICK_COUNT);
+
+	local_irq_restore(flags);
+	if (no_ctr_free) {
+		wrmsrl(MSR_K7_EVNTSEL3, 0);
+		wrmsrl(MSR_K7_PERFCTR3, pmc3);
+		wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
+	} else {
+		release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+		release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+	}
+
+	return pmc_now * tsc_khz / (tsc_now - tsc_start);
+}
+#else
+static inline unsigned long calibrate_cpu(void) { return cpu_khz; }
+#endif
+
 void __init tsc_init(void)
 {
 	u64 lpj;
@@ -870,11 +925,9 @@ void __init tsc_init(void)
 		return;
 	}
 
-#ifdef CONFIG_X86_64
 	if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
 			(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
 		cpu_khz = calibrate_cpu();
-#endif
 
 	printk("Detected %lu.%03lu MHz processor.\n",
 			(unsigned long)cpu_khz / 1000,
-- 
cgit v1.2.3


From ef4512882dbe9978e7a18ccbcb4cb45705ce5560 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 21 Aug 2009 13:24:08 +0200
Subject: x86: time_32/64.c unify profile_pc

The code is identical except for the formatting and a useless
#ifdef. Make it the same.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/time_32.c | 13 ++++++-------
 arch/x86/kernel/time_64.c |  8 +++++---
 2 files changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index fd876cc7748..fda0c34da75 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -34,23 +34,22 @@ unsigned long profile_pc(struct pt_regs *regs)
 {
 	unsigned long pc = instruction_pointer(regs);
 
-#ifdef CONFIG_SMP
 	if (!user_mode_vm(regs) && in_lock_functions(pc)) {
 #ifdef CONFIG_FRAME_POINTER
 		return *(unsigned long *)(regs->bp + sizeof(long));
 #else
-		unsigned long *sp = (unsigned long *)&regs->sp;
-
-		/* Return address is either directly at stack pointer
-		   or above a saved flags. Eflags has bits 22-31 zero,
-		   kernel addresses don't. */
+		unsigned long *sp = (unsigned long *)regs->sp;
+		/*
+		 * Return address is either directly at stack pointer
+		 * or above a saved flags. Eflags has bits 22-31 zero,
+		 * kernel addresses don't.
+		 */
 		if (sp[0] >> 22)
 			return sp[0];
 		if (sp[1] >> 22)
 			return sp[1];
 #endif
 	}
-#endif
 	return pc;
 }
 EXPORT_SYMBOL(profile_pc);
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
index e59a40ebff1..fda0c34da75 100644
--- a/arch/x86/kernel/time_64.c
+++ b/arch/x86/kernel/time_64.c
@@ -34,14 +34,16 @@ unsigned long profile_pc(struct pt_regs *regs)
 {
 	unsigned long pc = instruction_pointer(regs);
 
-	/* Assume the lock function has either no stack frame or a copy
-	   of flags from PUSHF
-	   Eflags always has bits 22 and up cleared unlike kernel addresses. */
 	if (!user_mode_vm(regs) && in_lock_functions(pc)) {
 #ifdef CONFIG_FRAME_POINTER
 		return *(unsigned long *)(regs->bp + sizeof(long));
 #else
 		unsigned long *sp = (unsigned long *)regs->sp;
+		/*
+		 * Return address is either directly at stack pointer
+		 * or above a saved flags. Eflags has bits 22-31 zero,
+		 * kernel addresses don't.
+		 */
 		if (sp[0] >> 22)
 			return sp[0];
 		if (sp[1] >> 22)
-- 
cgit v1.2.3


From 47926214d8b2bef13b2be57c500194a804f16198 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 16:47:19 +0200
Subject: x86: Replace the now identical time_32/64.c by time.c

Remove the redundant copy.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/Makefile  |   2 +-
 arch/x86/kernel/time.c    | 121 ++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/time_32.c | 121 ----------------------------------------------
 arch/x86/kernel/time_64.c | 121 ----------------------------------------------
 4 files changed, 122 insertions(+), 243 deletions(-)
 create mode 100644 arch/x86/kernel/time.c
 delete mode 100644 arch/x86/kernel/time_32.c
 delete mode 100644 arch/x86/kernel/time_64.c

(limited to 'arch')

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 313ed6fca9b..ccf3db607c2 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -31,7 +31,7 @@ GCOV_PROFILE_paravirt.o		:= n
 
 obj-y			:= process_$(BITS).o signal.o entry_$(BITS).o
 obj-y			+= traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
-obj-y			+= time_$(BITS).o ioport.o ldt.o dumpstack.o
+obj-y			+= time.o ioport.o ldt.o dumpstack.o
 obj-y			+= setup.o x86_init.o i8259.o irqinit.o
 obj-$(CONFIG_X86_VISWS)	+= visws_quirks.o
 obj-$(CONFIG_X86_32)	+= probe_roms_32.o
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
new file mode 100644
index 00000000000..fda0c34da75
--- /dev/null
+++ b/arch/x86/kernel/time.c
@@ -0,0 +1,121 @@
+/*
+ *  Copyright (c) 1991,1992,1995  Linus Torvalds
+ *  Copyright (c) 1994  Alan Modra
+ *  Copyright (c) 1995  Markus Kuhn
+ *  Copyright (c) 1996  Ingo Molnar
+ *  Copyright (c) 1998  Andrea Arcangeli
+ *  Copyright (c) 2002,2006  Vojtech Pavlik
+ *  Copyright (c) 2003  Andi Kleen
+ *
+ */
+
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/mca.h>
+
+#include <asm/vsyscall.h>
+#include <asm/x86_init.h>
+#include <asm/i8259.h>
+#include <asm/i8253.h>
+#include <asm/timer.h>
+#include <asm/hpet.h>
+#include <asm/time.h>
+
+#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
+int timer_ack;
+#endif
+
+#ifdef CONFIG_X86_64
+volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
+#endif
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	if (!user_mode_vm(regs) && in_lock_functions(pc)) {
+#ifdef CONFIG_FRAME_POINTER
+		return *(unsigned long *)(regs->bp + sizeof(long));
+#else
+		unsigned long *sp = (unsigned long *)regs->sp;
+		/*
+		 * Return address is either directly at stack pointer
+		 * or above a saved flags. Eflags has bits 22-31 zero,
+		 * kernel addresses don't.
+		 */
+		if (sp[0] >> 22)
+			return sp[0];
+		if (sp[1] >> 22)
+			return sp[1];
+#endif
+	}
+	return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+/*
+ * Default timer interrupt handler for PIT/HPET
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	/* Keep nmi watchdog up to date */
+	inc_irq_stat(irq0_irqs);
+
+	/* Optimized out for !IO_APIC and x86_64 */
+	if (timer_ack) {
+		/*
+		 * Subtle, when I/O APICs are used we have to ack timer IRQ
+		 * manually to deassert NMI lines for the watchdog if run
+		 * on an 82489DX-based system.
+		 */
+		spin_lock(&i8259A_lock);
+		outb(0x0c, PIC_MASTER_OCW3);
+		/* Ack the IRQ; AEOI will end it automatically. */
+		inb(PIC_MASTER_POLL);
+		spin_unlock(&i8259A_lock);
+	}
+
+	global_clock_event->event_handler(global_clock_event);
+
+	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
+	if (MCA_bus)
+		outb_p(inb_p(0x61)| 0x80, 0x61);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq0  = {
+	.handler = timer_interrupt,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
+	.name = "timer"
+};
+
+void __init setup_default_timer_irq(void)
+{
+	irq0.mask = cpumask_of_cpu(0);
+	setup_irq(0, &irq0);
+}
+
+/* Default timer init function */
+void __init hpet_time_init(void)
+{
+	if (!hpet_enable())
+		setup_pit_timer();
+	setup_default_timer_irq();
+}
+
+static void x86_late_time_init(void)
+{
+	x86_init.timers.timer_init();
+}
+
+/*
+ * Initialize TSC and delay the periodic timer init to
+ * late x86_late_time_init() so ioremap works.
+ */
+void __init time_init(void)
+{
+	tsc_init();
+	late_time_init = x86_late_time_init;
+}
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
deleted file mode 100644
index fda0c34da75..00000000000
--- a/arch/x86/kernel/time_32.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (c) 1991,1992,1995  Linus Torvalds
- *  Copyright (c) 1994  Alan Modra
- *  Copyright (c) 1995  Markus Kuhn
- *  Copyright (c) 1996  Ingo Molnar
- *  Copyright (c) 1998  Andrea Arcangeli
- *  Copyright (c) 2002,2006  Vojtech Pavlik
- *  Copyright (c) 2003  Andi Kleen
- *
- */
-
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/mca.h>
-
-#include <asm/vsyscall.h>
-#include <asm/x86_init.h>
-#include <asm/i8259.h>
-#include <asm/i8253.h>
-#include <asm/timer.h>
-#include <asm/hpet.h>
-#include <asm/time.h>
-
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-int timer_ack;
-#endif
-
-#ifdef CONFIG_X86_64
-volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
-#endif
-
-unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-	if (!user_mode_vm(regs) && in_lock_functions(pc)) {
-#ifdef CONFIG_FRAME_POINTER
-		return *(unsigned long *)(regs->bp + sizeof(long));
-#else
-		unsigned long *sp = (unsigned long *)regs->sp;
-		/*
-		 * Return address is either directly at stack pointer
-		 * or above a saved flags. Eflags has bits 22-31 zero,
-		 * kernel addresses don't.
-		 */
-		if (sp[0] >> 22)
-			return sp[0];
-		if (sp[1] >> 22)
-			return sp[1];
-#endif
-	}
-	return pc;
-}
-EXPORT_SYMBOL(profile_pc);
-
-/*
- * Default timer interrupt handler for PIT/HPET
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	/* Keep nmi watchdog up to date */
-	inc_irq_stat(irq0_irqs);
-
-	/* Optimized out for !IO_APIC and x86_64 */
-	if (timer_ack) {
-		/*
-		 * Subtle, when I/O APICs are used we have to ack timer IRQ
-		 * manually to deassert NMI lines for the watchdog if run
-		 * on an 82489DX-based system.
-		 */
-		spin_lock(&i8259A_lock);
-		outb(0x0c, PIC_MASTER_OCW3);
-		/* Ack the IRQ; AEOI will end it automatically. */
-		inb(PIC_MASTER_POLL);
-		spin_unlock(&i8259A_lock);
-	}
-
-	global_clock_event->event_handler(global_clock_event);
-
-	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
-	if (MCA_bus)
-		outb_p(inb_p(0x61)| 0x80, 0x61);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
-	.name = "timer"
-};
-
-void __init setup_default_timer_irq(void)
-{
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
-/* Default timer init function */
-void __init hpet_time_init(void)
-{
-	if (!hpet_enable())
-		setup_pit_timer();
-	setup_default_timer_irq();
-}
-
-static void x86_late_time_init(void)
-{
-	x86_init.timers.timer_init();
-}
-
-/*
- * Initialize TSC and delay the periodic timer init to
- * late x86_late_time_init() so ioremap works.
- */
-void __init time_init(void)
-{
-	tsc_init();
-	late_time_init = x86_late_time_init;
-}
diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
deleted file mode 100644
index fda0c34da75..00000000000
--- a/arch/x86/kernel/time_64.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (c) 1991,1992,1995  Linus Torvalds
- *  Copyright (c) 1994  Alan Modra
- *  Copyright (c) 1995  Markus Kuhn
- *  Copyright (c) 1996  Ingo Molnar
- *  Copyright (c) 1998  Andrea Arcangeli
- *  Copyright (c) 2002,2006  Vojtech Pavlik
- *  Copyright (c) 2003  Andi Kleen
- *
- */
-
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/mca.h>
-
-#include <asm/vsyscall.h>
-#include <asm/x86_init.h>
-#include <asm/i8259.h>
-#include <asm/i8253.h>
-#include <asm/timer.h>
-#include <asm/hpet.h>
-#include <asm/time.h>
-
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-int timer_ack;
-#endif
-
-#ifdef CONFIG_X86_64
-volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
-#endif
-
-unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-	if (!user_mode_vm(regs) && in_lock_functions(pc)) {
-#ifdef CONFIG_FRAME_POINTER
-		return *(unsigned long *)(regs->bp + sizeof(long));
-#else
-		unsigned long *sp = (unsigned long *)regs->sp;
-		/*
-		 * Return address is either directly at stack pointer
-		 * or above a saved flags. Eflags has bits 22-31 zero,
-		 * kernel addresses don't.
-		 */
-		if (sp[0] >> 22)
-			return sp[0];
-		if (sp[1] >> 22)
-			return sp[1];
-#endif
-	}
-	return pc;
-}
-EXPORT_SYMBOL(profile_pc);
-
-/*
- * Default timer interrupt handler for PIT/HPET
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	/* Keep nmi watchdog up to date */
-	inc_irq_stat(irq0_irqs);
-
-	/* Optimized out for !IO_APIC and x86_64 */
-	if (timer_ack) {
-		/*
-		 * Subtle, when I/O APICs are used we have to ack timer IRQ
-		 * manually to deassert NMI lines for the watchdog if run
-		 * on an 82489DX-based system.
-		 */
-		spin_lock(&i8259A_lock);
-		outb(0x0c, PIC_MASTER_OCW3);
-		/* Ack the IRQ; AEOI will end it automatically. */
-		inb(PIC_MASTER_POLL);
-		spin_unlock(&i8259A_lock);
-	}
-
-	global_clock_event->event_handler(global_clock_event);
-
-	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
-	if (MCA_bus)
-		outb_p(inb_p(0x61)| 0x80, 0x61);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq0  = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
-	.name = "timer"
-};
-
-void __init setup_default_timer_irq(void)
-{
-	irq0.mask = cpumask_of_cpu(0);
-	setup_irq(0, &irq0);
-}
-
-/* Default timer init function */
-void __init hpet_time_init(void)
-{
-	if (!hpet_enable())
-		setup_pit_timer();
-	setup_default_timer_irq();
-}
-
-static void x86_late_time_init(void)
-{
-	x86_init.timers.timer_init();
-}
-
-/*
- * Initialize TSC and delay the periodic timer init to
- * late x86_late_time_init() so ioremap works.
- */
-void __init time_init(void)
-{
-	tsc_init();
-	late_time_init = x86_late_time_init;
-}
-- 
cgit v1.2.3


From 2d826404f0bdcac2a4dd7e3c446b70d6a3b63b78 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 17:06:25 +0200
Subject: x86: Move tsc_calibration to x86_init_ops

TSC calibration is modified by the vmware hypervisor and paravirt by
separate means. Moorestown wants to add its own calibration routine as
well. So make calibrate_tsc a proper x86_init_ops function and
override it by paravirt or by the early setup of the vmware
hypervisor.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/hypervisor.h |  2 +-
 arch/x86/include/asm/paravirt.h   |  1 -
 arch/x86/include/asm/timer.h      |  5 -----
 arch/x86/include/asm/tsc.h        |  3 ++-
 arch/x86/include/asm/vmware.h     |  2 +-
 arch/x86/include/asm/x86_init.h   |  9 +++++++++
 arch/x86/kernel/cpu/hypervisor.c  | 14 +++++++-------
 arch/x86/kernel/cpu/vmware.c      | 21 ++++++++++++---------
 arch/x86/kernel/kvmclock.c        |  2 +-
 arch/x86/kernel/paravirt.c        |  1 -
 arch/x86/kernel/setup.c           |  2 +-
 arch/x86/kernel/tsc.c             | 13 ++++---------
 arch/x86/kernel/vmi_32.c          |  2 +-
 arch/x86/kernel/vmiclock_32.c     |  2 +-
 arch/x86/kernel/x86_init.c        |  5 +++++
 arch/x86/lguest/boot.c            |  2 +-
 arch/x86/xen/enlighten.c          |  3 ++-
 17 files changed, 48 insertions(+), 41 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index 369f5c5d09a..b78c0941e42 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -20,7 +20,7 @@
 #ifndef ASM_X86__HYPERVISOR_H
 #define ASM_X86__HYPERVISOR_H
 
-extern unsigned long get_hypervisor_tsc_freq(void);
 extern void init_hypervisor(struct cpuinfo_x86 *c);
+extern void init_hypervisor_platform(void);
 
 #endif
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 11a4ba7b209..1e458a55330 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -210,7 +210,6 @@ static inline unsigned long long paravirt_sched_clock(void)
 {
 	return PVOP_CALL0(unsigned long long, pv_time_ops.sched_clock);
 }
-#define calibrate_tsc() (pv_time_ops.get_tsc_khz())
 
 static inline unsigned long long paravirt_read_pmc(int counter)
 {
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index 65228ccc5f0..5469630b27f 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -8,7 +8,6 @@
 #define TICK_SIZE (tick_nsec / 1000)
 
 unsigned long long native_sched_clock(void);
-unsigned long native_calibrate_tsc(void);
 extern int recalibrate_cpu_khz(void);
 
 #if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
@@ -19,10 +18,6 @@ extern int timer_ack;
 
 extern int no_timer_check;
 
-#ifndef CONFIG_PARAVIRT
-#define calibrate_tsc() native_calibrate_tsc()
-#endif
-
 /* Accelerators for sched_clock()
  * convert from cycles(64bits) => nanoseconds (64bits)
  *  basic equation:
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 38ae163cc91..c0427295e8f 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -48,7 +48,8 @@ static __always_inline cycles_t vget_cycles(void)
 extern void tsc_init(void);
 extern void mark_tsc_unstable(char *reason);
 extern int unsynchronized_tsc(void);
-int check_tsc_unstable(void);
+extern int check_tsc_unstable(void);
+extern unsigned long native_calibrate_tsc(void);
 
 /*
  * Boot-time check whether the TSCs are synchronized across
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index c11b7e100d8..e49ed6d2fd4 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -20,7 +20,7 @@
 #ifndef ASM_X86__VMWARE_H
 #define ASM_X86__VMWARE_H
 
-extern unsigned long vmware_get_tsc_khz(void);
+extern void vmware_platform_setup(void);
 extern int vmware_platform(void);
 extern void vmware_set_feature_bits(struct cpuinfo_x86 *c);
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f8bdd2271a0..20df5187171 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -112,8 +112,17 @@ struct x86_cpuinit_ops {
 	void (*setup_percpu_clockev)(void);
 };
 
+/**
+ * struct x86_platform_ops - platform specific runtime functions
+ * @calibrate_tsc:		calibrate TSC
+ */
+struct x86_platform_ops {
+	unsigned long (*calibrate_tsc)(void);
+};
+
 extern struct x86_init_ops x86_init;
 extern struct x86_cpuinit_ops x86_cpuinit;
+extern struct x86_platform_ops x86_platform;
 
 extern void x86_init_noop(void);
 extern void x86_init_uint_noop(unsigned int unused);
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index 93ba8eeb100..08be922de33 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -34,13 +34,6 @@ detect_hypervisor_vendor(struct cpuinfo_x86 *c)
 		c->x86_hyper_vendor = X86_HYPER_VENDOR_NONE;
 }
 
-unsigned long get_hypervisor_tsc_freq(void)
-{
-	if (boot_cpu_data.x86_hyper_vendor == X86_HYPER_VENDOR_VMWARE)
-		return vmware_get_tsc_khz();
-	return 0;
-}
-
 static inline void __cpuinit
 hypervisor_set_feature_bits(struct cpuinfo_x86 *c)
 {
@@ -55,3 +48,10 @@ void __cpuinit init_hypervisor(struct cpuinfo_x86 *c)
 	detect_hypervisor_vendor(c);
 	hypervisor_set_feature_bits(c);
 }
+
+void __init init_hypervisor_platform(void)
+{
+	init_hypervisor(&boot_cpu_data);
+	if (boot_cpu_data.x86_hyper_vendor == X86_HYPER_VENDOR_VMWARE)
+		vmware_platform_setup();
+}
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index bc24f514ec9..0a46b4df5d8 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -24,6 +24,7 @@
 #include <linux/dmi.h>
 #include <asm/div64.h>
 #include <asm/vmware.h>
+#include <asm/x86_init.h>
 
 #define CPUID_VMWARE_INFO_LEAF	0x40000000
 #define VMWARE_HYPERVISOR_MAGIC	0x564D5868
@@ -47,21 +48,29 @@ static inline int __vmware_platform(void)
 	return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
 }
 
-static unsigned long __vmware_get_tsc_khz(void)
+static unsigned long vmware_get_tsc_khz(void)
 {
 	uint64_t tsc_hz;
 	uint32_t eax, ebx, ecx, edx;
 
 	VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
 
-	if (ebx == UINT_MAX)
-		return 0;
 	tsc_hz = eax | (((uint64_t)ebx) << 32);
 	do_div(tsc_hz, 1000);
 	BUG_ON(tsc_hz >> 32);
 	return tsc_hz;
 }
 
+void __init vmware_platform_setup(void)
+{
+	uint32_t eax, ebx, ecx, edx;
+
+	VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
+
+	if (ebx != UINT_MAX)
+		x86_platform.calibrate_tsc = vmware_get_tsc_khz;
+}
+
 /*
  * While checking the dmi string infomation, just checking the product
  * serial key should be enough, as this will always have a VMware
@@ -87,12 +96,6 @@ int vmware_platform(void)
 	return 0;
 }
 
-unsigned long vmware_get_tsc_khz(void)
-{
-	BUG_ON(!vmware_platform());
-	return __vmware_get_tsc_khz();
-}
-
 /*
  * VMware hypervisor takes care of exporting a reliable TSC to the guest.
  * Still, due to timing difference when running on virtual cpus, the TSC can
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 64e9b5f59d2..75a21b61b86 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -187,7 +187,7 @@ void __init kvmclock_init(void)
 		pv_time_ops.get_wallclock = kvm_get_wallclock;
 		pv_time_ops.set_wallclock = kvm_set_wallclock;
 		pv_time_ops.sched_clock = kvm_clock_read;
-		pv_time_ops.get_tsc_khz = kvm_get_tsc_khz;
+		x86_platform.calibrate_tsc = kvm_get_tsc_khz;
 #ifdef CONFIG_X86_LOCAL_APIC
 		x86_cpuinit.setup_percpu_clockev =
 			kvm_setup_secondary_clock;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 9c0e644a76d..7cbf898d839 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -309,7 +309,6 @@ struct pv_time_ops pv_time_ops = {
 	.get_wallclock = native_get_wallclock,
 	.set_wallclock = native_set_wallclock,
 	.sched_clock = native_sched_clock,
-	.get_tsc_khz = native_calibrate_tsc,
 };
 
 struct pv_irq_ops pv_irq_ops = {
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index bb207a47c63..2d93026af7c 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -818,7 +818,7 @@ void __init setup_arch(char **cmdline_p)
 	 * VMware detection requires dmi to be available, so this
 	 * needs to be done after dmi_scan_machine, for the BP.
 	 */
-	init_hypervisor(&boot_cpu_data);
+	init_hypervisor_platform();
 
 	x86_init.resources.probe_roms();
 
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 97a0bcbad10..9917632a8b4 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -18,6 +18,7 @@
 #include <asm/delay.h>
 #include <asm/hypervisor.h>
 #include <asm/nmi.h>
+#include <asm/x86_init.h>
 
 unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
@@ -401,15 +402,9 @@ unsigned long native_calibrate_tsc(void)
 {
 	u64 tsc1, tsc2, delta, ref1, ref2;
 	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
-	unsigned long flags, latch, ms, fast_calibrate, hv_tsc_khz;
+	unsigned long flags, latch, ms, fast_calibrate;
 	int hpet = is_hpet_enabled(), i, loopmin;
 
-	hv_tsc_khz = get_hypervisor_tsc_freq();
-	if (hv_tsc_khz) {
-		printk(KERN_INFO "TSC: Frequency read from the hypervisor\n");
-		return hv_tsc_khz;
-	}
-
 	local_irq_save(flags);
 	fast_calibrate = quick_pit_calibrate();
 	local_irq_restore(flags);
@@ -567,7 +562,7 @@ int recalibrate_cpu_khz(void)
 	unsigned long cpu_khz_old = cpu_khz;
 
 	if (cpu_has_tsc) {
-		tsc_khz = calibrate_tsc();
+		tsc_khz = x86_platform.calibrate_tsc();
 		cpu_khz = tsc_khz;
 		cpu_data(0).loops_per_jiffy =
 			cpufreq_scale(cpu_data(0).loops_per_jiffy,
@@ -917,7 +912,7 @@ void __init tsc_init(void)
 	if (!cpu_has_tsc)
 		return;
 
-	tsc_khz = calibrate_tsc();
+	tsc_khz = x86_platform.calibrate_tsc();
 	cpu_khz = tsc_khz;
 
 	if (!tsc_khz) {
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index cd7d0fbbf66..052ae81ee08 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -825,7 +825,7 @@ static inline int __init activate_vmi(void)
 		x86_cpuinit.setup_percpu_clockev = vmi_time_ap_init;
 #endif
 		pv_time_ops.sched_clock = vmi_sched_clock;
-		pv_time_ops.get_tsc_khz = vmi_tsc_khz;
+		x86_platform.calibrate_tsc = vmi_tsc_khz;
 
 		/* We have true wallclock functions; disable CMOS clock sync */
 		no_sync_cmos_clock = 1;
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
index 2b3eb82efee..611b9e2360d 100644
--- a/arch/x86/kernel/vmiclock_32.c
+++ b/arch/x86/kernel/vmiclock_32.c
@@ -68,7 +68,7 @@ unsigned long long vmi_sched_clock(void)
 	return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
 }
 
-/* paravirt_ops.get_tsc_khz = vmi_tsc_khz */
+/* x86_platform.calibrate_tsc = vmi_tsc_khz */
 unsigned long vmi_tsc_khz(void)
 {
 	unsigned long long khz;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 4790b92714a..13081b92191 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -13,6 +13,7 @@
 #include <asm/e820.h>
 #include <asm/time.h>
 #include <asm/irq.h>
+#include <asm/tsc.h>
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
@@ -67,3 +68,7 @@ struct __initdata x86_init_ops x86_init = {
 __cpuinitdata struct x86_cpuinit_ops x86_cpuinit = {
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
 };
+
+struct x86_platform_ops x86_platform = {
+	.calibrate_tsc			= native_calibrate_tsc,
+};
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 6caa8c0c793..fabe745513d 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1320,11 +1320,11 @@ __init void lguest_init(void)
 
 	/* Time operations */
 	pv_time_ops.get_wallclock = lguest_get_wallclock;
-	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
 	x86_init.resources.memory_setup = lguest_memory_setup;
 	x86_init.irqs.intr_init = lguest_init_IRQ;
 	x86_init.timers.timer_init = lguest_time_init;
+	x86_platform.calibrate_tsc = lguest_tsc_khz;
 
 	/*
 	 * Now is a good time to look at the implementations of these functions
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 84826b842b5..ee8cac77c8a 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -844,7 +844,6 @@ static const struct pv_init_ops xen_init_ops __initdata = {
 static const struct pv_time_ops xen_time_ops __initdata = {
 	.set_wallclock = xen_set_wallclock,
 	.get_wallclock = xen_get_wallclock,
-	.get_tsc_khz = xen_tsc_khz,
 	.sched_clock = xen_sched_clock,
 };
 
@@ -980,6 +979,8 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_init.timers.setup_percpu_clockev = x86_init_noop;
 	x86_cpuinit.setup_percpu_clockev = x86_init_noop;
 
+	x86_platform.calibrate_tsc = xen_tsc_khz;
+
 #ifdef CONFIG_X86_64
 	/*
 	 * Setup percpu state.  We only need to do this for 64-bit
-- 
cgit v1.2.3


From dd0a70c8f921708eba29ef9f30dde1f14a74af05 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 20 Aug 2009 16:51:07 +0200
Subject: x86: Move tsc_init to late_time_init

We do not need the TSC before late_time_init. Move the tsc_init to the
late time init code so we can also utilize HPET for calibration (which
we claimed to do but never did except in some older kernel
version). This also helps Moorestown to calibrate the TSC with the
AHBT timer which needs to be initialized in late_time_init like HPET.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index fda0c34da75..fcece00356a 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -108,6 +108,7 @@ void __init hpet_time_init(void)
 static void x86_late_time_init(void)
 {
 	x86_init.timers.timer_init();
+	tsc_init();
 }
 
 /*
@@ -116,6 +117,5 @@ static void x86_late_time_init(void)
  */
 void __init time_init(void)
 {
-	tsc_init();
 	late_time_init = x86_late_time_init;
 }
-- 
cgit v1.2.3


From 47a3d5da70f411bc044ecd3c0593b158b09d0efa Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 29 Aug 2009 15:03:59 +0200
Subject: x86: Add early platform detection

Platforms like Moorestown require early setup and want to avoid the
call to reserve_ebda_region. The x86_init override is too late when
the MRST detection happens in setup_arch. Move the default i386
x86_init overrides and the call to reserve_ebda_region into a separate
function which is called as the default of a switch case depending on
the hardware_subarch id in boot params. This allows us to add a case
for MRST and let MRST have its own early setup function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/x86_init.h |  3 +--
 arch/x86/kernel/head32.c        | 22 +++++++++++++++++-----
 arch/x86/kernel/head64.c        |  3 ++-
 arch/x86/kernel/x86_init.c      |  1 -
 4 files changed, 20 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 20df5187171..b6c89428137 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_PLATFORM_H
 
 #include <asm/pgtable_types.h>
+#include <asm/bootparam.h>
 
 struct mpc_bus;
 struct mpc_cpu;
@@ -34,14 +35,12 @@ struct x86_init_mpparse {
  * @probe_roms:			probe BIOS roms
  * @reserve_resources:		reserve the standard resources for the
  *				platform
- * @reserve_ebda_region:	reserve the extended bios data area
  * @memory_setup:		platform specific memory setup
  *
  */
 struct x86_init_resources {
 	void (*probe_roms)(void);
 	void (*reserve_resources)(void);
-	void (*reserve_ebda_region)(void);
 	char *(*memory_setup)(void);
 };
 
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index a21398fac4f..441c075e2b8 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -15,6 +15,17 @@
 #include <asm/trampoline.h>
 #include <asm/apic.h>
 #include <asm/io_apic.h>
+#include <asm/bios_ebda.h>
+
+static void __init i386_default_early_setup(void)
+{
+	/* Initilize 32bit specific setup functions */
+	x86_init.resources.probe_roms = probe_roms;
+	x86_init.resources.reserve_resources = i386_reserve_resources;
+	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
+
+	reserve_ebda_region();
+}
 
 void __init i386_start_kernel(void)
 {
@@ -31,12 +42,13 @@ void __init i386_start_kernel(void)
 		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
 	}
 #endif
-	/* Initilize 32bit specific setup functions */
-	x86_init.resources.probe_roms = probe_roms;
-	x86_init.resources.reserve_resources = i386_reserve_resources;
-	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
 
-	x86_init.resources.reserve_ebda_region();
+	/* Call the subarch specific early setup function */
+	switch (boot_params.hdr.hardware_subarch) {
+	default:
+		i386_default_early_setup();
+		break;
+	}
 
 	/*
 	 * At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index cead8149c3d..0b06cd778fd 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -24,6 +24,7 @@
 #include <asm/kdebug.h>
 #include <asm/e820.h>
 #include <asm/trampoline.h>
+#include <asm/bios_ebda.h>
 
 static void __init zap_identity_mappings(void)
 {
@@ -111,7 +112,7 @@ void __init x86_64_start_reservations(char *real_mode_data)
 	}
 #endif
 
-	x86_init.resources.reserve_ebda_region();
+	reserve_ebda_region();
 
 	/*
 	 * At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 13081b92191..24be7f39789 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -28,7 +28,6 @@ struct __initdata x86_init_ops x86_init = {
 	.resources = {
 		.probe_roms		= x86_init_noop,
 		.reserve_resources	= reserve_standard_io_resources,
-		.reserve_ebda_region	= reserve_ebda_region,
 		.memory_setup		= default_machine_specific_memory_setup,
 	},
 
-- 
cgit v1.2.3


From 162bc7ab01a00eba1c5d614e64a51e1268ee3f96 Mon Sep 17 00:00:00 2001
From: "Pan, Jacob jun" <jacob.jun.pan@intel.com>
Date: Fri, 28 Aug 2009 14:52:47 -0700
Subject: x86: Add hardware_subarch ID for Moorestown

x86 bootprotocol 2.07 has introduced hardware_subarch ID in the boot
parameters provided by FW. We use it to identify Moorestown platforms.

[ tglx: Cleanup and paravirt fix ]

Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/bootparam.h | 10 ++++++++++
 arch/x86/kernel/head_32.S        |  1 +
 2 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 1724e8de317..283a9a1b3ef 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -109,4 +109,14 @@ struct boot_params {
 	__u8  _pad9[276];				/* 0xeec */
 } __attribute__((packed));
 
+enum {
+	X86_SUBARCH_PC = 0,
+	X86_SUBARCH_LGUEST,
+	X86_SUBARCH_XEN,
+	X86_SUBARCH_MRST,
+	X86_NR_SUBARCHS,
+};
+
+
+
 #endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index cc827ac9e8d..304e3f3d747 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -157,6 +157,7 @@ subarch_entries:
 	.long default_entry		/* normal x86/PC */
 	.long lguest_entry		/* lguest hypervisor */
 	.long xen_entry			/* Xen hypervisor */
+	.long default_entry		/* Moorestown MID */
 num_subarch_entries = (. - subarch_entries) / 4
 .previous
 #endif /* CONFIG_PARAVIRT */
-- 
cgit v1.2.3


From 3f4110a48a749a1aa1c54fb807afb3f32f49711c Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 29 Aug 2009 14:54:20 +0200
Subject: x86: Add Moorestown early detection

Moorestown MID devices need to be detected early in the boot process
to setup and do not call x86_default_early_setup as there is no EBDA
region to reserve.

[ Copied the minimal code from Jacobs latest MRST series ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
---
 arch/x86/Kconfig             | 13 +++++++++++++
 arch/x86/include/asm/setup.h |  6 ++++++
 arch/x86/kernel/Makefile     |  1 +
 arch/x86/kernel/head32.c     |  3 +++
 arch/x86/kernel/mrst.c       | 24 ++++++++++++++++++++++++
 5 files changed, 47 insertions(+)
 create mode 100644 arch/x86/kernel/mrst.c

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 13ffa5df37d..586d84557f7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -318,6 +318,7 @@ config X86_EXTENDED_PLATFORM
 		SGI 320/540 (Visual Workstation)
 		Summit/EXA (IBM x440)
 		Unisys ES7000 IA32 series
+		Moorestown MID devices
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
@@ -377,6 +378,18 @@ config X86_ELAN
 
 	  If unsure, choose "PC-compatible" instead.
 
+config X86_MRST
+       bool "Moorestown MID platform"
+	depends on X86_32
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
+	  Internet Device(MID) platform. Moorestown consists of two chips:
+	  Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
+	  Unlike standard x86 PCs, Moorestown does not have many legacy devices
+	  nor standard legacy replacement devices/features. e.g. Moorestown does
+	  not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
+
 config X86_RDC321X
 	bool "RDC R-321x SoC"
 	depends on X86_32
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 861e1fe2303..18e496c98ff 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -49,6 +49,12 @@ extern void reserve_standard_io_resources(void);
 extern void i386_reserve_resources(void);
 extern void setup_default_timer_irq(void);
 
+#ifdef CONFIG_X86_MRST
+extern void x86_mrst_early_setup(void);
+#else
+static inline void x86_mrst_early_setup(void) { }
+#endif
+
 #ifndef _SETUP
 
 /*
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index ccf3db607c2..5f33316610d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -104,6 +104,7 @@ obj-$(CONFIG_SCx200)		+= scx200.o
 scx200-y			+= scx200_32.o
 
 obj-$(CONFIG_OLPC)		+= olpc.o
+obj-$(CONFIG_X86_MRST)		+= mrst.o
 
 microcode-y				:= microcode_core.o
 microcode-$(CONFIG_MICROCODE_INTEL)	+= microcode_intel.o
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 441c075e2b8..4f8e2507e8f 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -45,6 +45,9 @@ void __init i386_start_kernel(void)
 
 	/* Call the subarch specific early setup function */
 	switch (boot_params.hdr.hardware_subarch) {
+	case X86_SUBARCH_MRST:
+		x86_mrst_early_setup();
+		break;
 	default:
 		i386_default_early_setup();
 		break;
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
new file mode 100644
index 00000000000..3b7078abc87
--- /dev/null
+++ b/arch/x86/kernel/mrst.c
@@ -0,0 +1,24 @@
+/*
+ * mrst.c: Intel Moorestown platform specific setup code
+ *
+ * (C) Copyright 2008 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/init.h>
+
+#include <asm/setup.h>
+
+/*
+ * Moorestown specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_mrst_early_setup(void)
+{
+	x86_init.resources.probe_roms = x86_init_noop;
+	x86_init.resources.reserve_resources = x86_init_noop;
+}
-- 
cgit v1.2.3


From f661be6c8af3ae357e159c3ac6d6aea4aaf7581c Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 13 Aug 2009 04:30:44 +0000
Subject: powerpc/44x: Update Arches dts

This patch adds some nodes to the AMCC Arches dts:

- L2 cache support
- NOR FLASH mapping with default partitioning
- I2C HWMON device (AD7414)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/dts/arches.dts | 50 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts
index d9113b1e8c1..414ef8b7e57 100644
--- a/arch/powerpc/boot/dts/arches.dts
+++ b/arch/powerpc/boot/dts/arches.dts
@@ -124,6 +124,16 @@
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-460gt", "ibm,plb4";
 		#address-cells = <2>;
@@ -168,6 +178,38 @@
 				/* ranges property is supplied by U-Boot */
 				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x02000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x01b60000>;
+					};
+					partition@1f60000 {
+						label = "env";
+						reg = <0x01f60000 0x00040000>;
+					};
+					partition@1fa0000 {
+						label = "u-boot";
+						reg = <0x01fa0000 0x00060000>;
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
@@ -186,6 +228,14 @@
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sttm@4a {
+					compatible = "ad,ad7414";
+					reg = <0x4a>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x0 0x8>;
+				};
 			};
 
 			IIC1: i2c@ef600800 {
-- 
cgit v1.2.3


From 241749261377f2e10d513505a75c071c0f4b3b51 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 13 Aug 2009 04:30:56 +0000
Subject: powerpc/44x: Update Arches defconfig

This patch adds NOR MTD support and I2C HWMON support for the AD7414
to the AMCC Arches defconfig.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/configs/44x/arches_defconfig | 382 ++++++++++++++++++++++++++----
 1 file changed, 332 insertions(+), 50 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index f7fd32c0942..6f976b51cdd 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:31 2009
+# Linux kernel version: 2.6.31-rc5
+# Thu Aug 13 14:14:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,9 +75,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -95,23 +113,30 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -119,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,11 +177,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -172,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 CONFIG_ARCHES=y
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -214,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -233,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -261,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -278,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -335,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -347,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -371,8 +402,92 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -412,7 +527,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -433,6 +552,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -451,6 +572,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -461,7 +583,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -533,13 +654,143 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+CONFIG_SENSORS_AD7414=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -556,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -600,7 +842,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -614,11 +861,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -627,6 +875,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -660,6 +913,17 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -670,6 +934,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -681,7 +946,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -697,6 +961,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -711,11 +976,14 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -733,6 +1001,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -743,6 +1014,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -754,7 +1028,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -762,27 +1035,36 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
-- 
cgit v1.2.3


From c9f75093a497bdc7389df983e914da17fad20d95 Mon Sep 17 00:00:00 2001
From: "fkan@amcc.com" <fkan@amcc.com>
Date: Wed, 12 Aug 2009 14:38:47 +0000
Subject: powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board
 support.

This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation
board.

Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Acked-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/dts/eiger.dts            |  421 ++++++++++
 arch/powerpc/configs/44x/eiger_defconfig   | 1252 ++++++++++++++++++++++++++++
 arch/powerpc/platforms/44x/Kconfig         |   12 +
 arch/powerpc/platforms/44x/ppc44x_simple.c |    1 +
 4 files changed, 1686 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/eiger.dts
 create mode 100644 arch/powerpc/configs/44x/eiger_defconfig

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts
new file mode 100644
index 00000000000..c4a934f2e88
--- /dev/null
+++ b/arch/powerpc/boot/dts/eiger.dts
@@ -0,0 +1,421 @@
+/*
+ * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX)
+ *
+ * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,eiger";
+	compatible = "amcc,eiger";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460SX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460sx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460sx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460sx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4
+					/*COAL TX0*/ 0x18 0x2
+					/*COAL TX1*/ 0x19 0x2
+					/*COAL TX2*/ 0x1a 0x2
+					/*COAL TX3*/ 0x1b 0x2
+					/*COAL RX0*/ 0x1c 0x2
+					/*COAL RX1*/ 0x1d 0x2
+					/*COAL RX2*/ 0x1e 0x2
+					/*COAL RX3*/ 0x1f 0x2>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460sx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460sx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					/* reg property is supplied in by U-Boot */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					/* reg property is supplied by U-boot */
+					ccr = <0x00003000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+						partition@0 {
+							label = "uboot";
+							reg = <0x00000000 0x00200000>;
+						};
+						partition@200000 {
+							label = "uboot-environment";
+							reg = <0x00200000 0x00100000>;
+						};
+						partition@300000 {
+							label = "linux";
+							reg = <0x00300000 0x00300000>;
+						};
+						partition@600000 {
+							label = "root-file-system";
+							reg = <0x00600000 0x01900000>;
+						};
+						partition@1f00000 {
+							label = "device-tree";
+							reg = <0x01f00000 0x00020000>;
+						};
+						partition@1f20000 {
+							label = "data";
+							reg = <0x01f20000 0x060E0000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <0>;
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <1>;
+			};
+
+			RGMII0: emac-rgmii@ef600900 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600900 0x00000008>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef600920 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600920 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef600e50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600e50 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef600f50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600f50 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600a00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600a00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600b00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600b00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef600c00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600c00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef600d00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600d00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <24>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+	};
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600200";
+	};
+
+};
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
new file mode 100644
index 00000000000..007f3bd939e
--- /dev/null
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -0,0 +1,1252 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Wed Aug 19 13:06:50 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+CONFIG_EIGER=y
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_460SX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+# CONFIG_I2O_CONFIG is not set
+# CONFIG_I2O_BUS is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 90e3192611a..7486bffd3eb 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -129,6 +129,18 @@ config REDWOOD
 	help
 	  This option enables support for the AMCC PPC460SX Redwood board.
 
+config EIGER
+	bool "Eiger"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 460SX
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	help
+	  This option enables support for the AMCC PPC460SX evaluation board.
+
 config YOSEMITE
 	bool "Yosemite"
 	depends on 44x
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index 5bcd441885e..e8c23ccaa1f 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -55,6 +55,7 @@ static char *board[] __initdata = {
 	"amcc,canyonlands",
 	"amcc,glacier",
 	"ibm,ebony",
+	"amcc,eiger",
 	"amcc,katmai",
 	"amcc,rainier",
 	"amcc,redwood",
-- 
cgit v1.2.3


From 0cdf50a7c65df894fb5fd0ef181fe18b8fec6137 Mon Sep 17 00:00:00 2001
From: Solomon Peachy <solomon@linux-wlan.com>
Date: Thu, 20 Aug 2009 10:19:47 +0000
Subject: powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

This patch adds support for the ESTeem 195E Hotfoot SBC.

There are several variants of the SBC deployed, single/dual
ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.

Signed-off-by: Solomon Peachy <solomon@linux-wlan.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/Makefile                 |   4 +-
 arch/powerpc/boot/cuboot-hotfoot.c         | 142 ++++++++++++++
 arch/powerpc/boot/dts/hotfoot.dts          | 294 +++++++++++++++++++++++++++++
 arch/powerpc/boot/ppcboot-hotfoot.h        | 133 +++++++++++++
 arch/powerpc/platforms/40x/Kconfig         |  10 +
 arch/powerpc/platforms/40x/ppc40x_simple.c |   3 +-
 6 files changed, 584 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/boot/cuboot-hotfoot.c
 create mode 100644 arch/powerpc/boot/dts/hotfoot.dts
 create mode 100644 arch/powerpc/boot/ppcboot-hotfoot.h

(limited to 'arch')

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 9ae7b7e2ba7..5a109a93753 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -39,6 +39,7 @@ DTS_FLAGS	?= -p 1024
 
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
@@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
+image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
 
diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c
new file mode 100644
index 00000000000..8f697b958e4
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-hotfoot.c
@@ -0,0 +1,142 @@
+/*
+ * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board
+ *
+ * Author: Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_HOTFOOT
+
+#include "ppcboot-hotfoot.h"
+
+static bd_t bd;
+
+#define NUM_REGS 3
+
+static void hotfoot_fixups(void)
+{
+	u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); 
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0);
+	dt_fixup_clock("/plb", bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/opb", bd.bi_opbfreq);
+	dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq);
+	dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); 
+	dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); 
+	
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+
+	/* Is this a single eth/serial board? */
+	if ((bd.bi_enet1addr[0] == 0) && 
+	    (bd.bi_enet1addr[1] == 0) &&
+	    (bd.bi_enet1addr[2] == 0) &&
+	    (bd.bi_enet1addr[3] == 0) &&
+	    (bd.bi_enet1addr[4] == 0) &&
+	    (bd.bi_enet1addr[5] == 0)) {
+		void *devp;
+
+		printf("Trimming devtree for single serial/eth board\n");
+
+		devp = finddevice("/plb/opb/serial@ef600300");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/serial@ef600300");
+		del_node(devp);
+
+		devp = finddevice("/plb/opb/ethernet@ef600900");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/ethernet@ef600900");
+		del_node(devp);
+	}
+
+	ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900);
+
+	/* Fix up flash size in fdt for 4M boards. */
+	if (bd.bi_flashsize < 0x800000) {
+		u32 regs[NUM_REGS];
+		void *devp = finddevice("/plb/ebc/nor_flash@0");
+		if (!devp)
+			fatal("Can't find FDT node for nor_flash!??");
+
+		printf("Fixing devtree for 4M Flash\n");
+		
+		/* First fix up the base addresse */
+		getprop(devp, "reg", regs, sizeof(regs));
+		regs[0] = 0;
+		regs[1] = 0xffc00000;
+		regs[2] = 0x00400000;
+		setprop(devp, "reg", regs, sizeof(regs));
+		
+		/* Then the offsets */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@0");
+		if (!devp)
+			fatal("Can't find FDT node for partition@0");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@1");
+		if (!devp)
+			fatal("Can't find FDT node for partition@1");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@2");
+		if (!devp)
+			fatal("Can't find FDT node for partition@2");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@3");
+		if (!devp)
+			fatal("Can't find FDT node for partition@3");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@4");
+		if (!devp)
+			fatal("Can't find FDT node for partition@4");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@6");
+		if (!devp)
+			fatal("Can't find FDT node for partition@6");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		/* Delete the FeatFS node */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@5");
+		if (!devp)
+			fatal("Can't find FDT node for partition@5");
+		del_node(devp);
+	}
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = hotfoot_fixups;
+        platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts
new file mode 100644
index 00000000000..cad9c3840af
--- /dev/null
+++ b/arch/powerpc/boot/dts/hotfoot.dts
@@ -0,0 +1,294 @@
+/*
+ * Device Tree Source for ESTeem 195E Hotfoot
+ *
+ * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "est,hotfoot";
+	compatible = "est,hotfoot";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ep";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ep", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			/* Hotfoot has UART0/UART1 swapped */
+
+			UART0: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ep", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				rtc@68 {
+					/* Actually a DS1339 */
+					compatible = "dallas,ds1307";
+					reg = <0x68>;
+				};
+
+				temp@4a {
+					/* Not present on all boards */
+					compatible = "national,lm75";
+					reg = <0x4a>;
+				};
+			};
+
+			GPIO: gpio@ef600700 {
+				#gpio-cells = <2>;
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600700 0x00000020>;
+				gpio-controller;
+			};
+
+			gpio-leds {
+				compatible = "gpio-leds";
+				status {
+					label = "Status";
+					gpios = <&GPIO 1 0>;
+				};
+				radiorx {
+					label = "Rx";
+					gpios = <&GPIO 0xe 0>;
+				};
+			};
+
+			EMAC0: ethernet@ef600800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "mii";
+				phy-map = <0x00000000>;
+			};
+
+			EMAC1: ethernet@ef600900 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x11 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600900 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				mdio-device = <&EMAC0>;
+				phy-mode = "mii";
+				phy-map = <0x0000001>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ep", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			nor_flash@0 {
+				compatible = "cfi-flash";
+				bank-width = <2>;
+				reg = <0x0 0xff800000 0x00800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* This mapping is for the 8M flash
+				   4M flash has all ofssets -= 4M,
+				   and FeatFS partition is not present */
+				partition@0 {
+					label = "Bootloader";
+					reg = <0x7c0000 0x40000>;
+					/* read-only; */
+				};
+				partition@1 {
+					label = "Env_and_Config_Primary";
+					reg = <0x400000 0x10000>;
+				};
+				partition@2 {
+					label = "Kernel";
+					reg = <0x420000 0x100000>;
+				};
+				partition@3 {
+					label = "Filesystem";
+					reg = <0x520000 0x2a0000>;
+				};
+				partition@4 {
+					label = "Env_and_Config_Secondary";
+					reg = <0x410000 0x10000>;
+				};
+				partition@5 {
+					label = "FeatFS";
+					reg = <0x000000 0x400000>;
+				};
+				partition@6 {
+					label = "Bootloader_Env";
+					reg = <0x7d0000 0x10000>;
+				};
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0xeec00000 0x00000008    /* Config space access */
+				0xeed80000 0x00000004    /* IACK */
+				0xeed80000 0x00000004    /* Special cycle */
+				0xef480000 0x00000040>;  /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-parent = <&UIC0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
+				0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
+				0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
+
+				/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
+				0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
+				0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
+				>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h
new file mode 100644
index 00000000000..1a3e80b533d
--- /dev/null
+++ b/arch/powerpc/boot/ppcboot-hotfoot.h
@@ -0,0 +1,133 @@
+/*
+ * This interface is used for compatibility with old U-boots *ONLY*.
+ * Please do not imitate or extend this.
+ */
+
+/* 
+ * Unfortunately, the ESTeem Hotfoot board uses a mangled version of 
+ * ppcboot.h for historical reasons, and in the interest of having a 
+ * mainline kernel boot on the production board+bootloader, this was the 
+ * least-offensive solution.  Please direct all flames to:
+ *
+ *  Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * (This header is identical to ppcboot.h except for the 
+ *  TARGET_HOTFOOT bits)
+ */
+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
+	defined(TARGET_83xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_mbar_base;   /* base of internal registers */
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+#if defined(TARGET_HOTFOOT)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif /* TARGET_HOOTFOOT */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(TARGET_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
+	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
+#endif
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+#if defined(TARGET_4xx)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(TARGET_HOTFOOT)
+	unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
+#endif
+#if defined(TARGET_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
+	defined(TARGET_85xx) ||	defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
+    defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
+	/* third onboard ethernet ports */
+	unsigned char	bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
+	/* fourth onboard ethernet ports */
+	unsigned char	bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(TARGET_HOTFOOT)
+        int             bi_phynum[2];           /* Determines phy mapping */
+        int             bi_phymode[2];          /* Determines phy mode */
+#endif
+#if defined(TARGET_4xx)
+	unsigned int	bi_opbfreq;		/* OB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(TARGET_440GX)
+	int		bi_phynum[4];		/* phy mapping */
+	int		bi_phymode[4];		/* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq	bi_intfreq
+
+#endif	/* __PPCBOOT_H__ */
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index a6e43cb6f82..ec64264f7a5 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -40,6 +40,16 @@ config HCU4
 	help
 	  This option enables support for the Nestal Maschinen HCU4 board.
 
+config HOTFOOT
+        bool "Hotfoot"
+	depends on 40x
+	default n
+	select 405EP
+	select PPC40x_SIMPLE
+	select PCI
+        help
+	 This option enables support for the ESTEEM 195E Hotfoot board.
+
 config KILAUEA
 	bool "Kilauea"
 	depends on 40x
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index 5fd5a597400..546bbc229d1 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -54,7 +54,8 @@ static char *board[] __initdata = {
 	"amcc,acadia",
 	"amcc,haleakala",
 	"amcc,kilauea",
-	"amcc,makalu"
+	"amcc,makalu",
+	"est,hotfoot"
 };
 
 static int __init ppc40x_probe(void)
-- 
cgit v1.2.3


From 0484c1df473815020bdce4b46b861395759686e5 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Sat, 22 Aug 2009 16:03:43 +0000
Subject: powerpc/405ex: provide necessary fixup function to support cuImage

For cuImage format it's necessary to provide clock fixups since u-boot will
not pass necessary clock frequency into the dtb included into cuImage so we
implement the clock fixups as defined in the technical documentation for the
board and update header file with the basic register definitions.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/4xx.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/4xx.h |   1 +
 arch/powerpc/boot/dcr.h |   4 +-
 3 files changed, 144 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 325b310573b..27db8938827 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -8,6 +8,10 @@
  *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *   Copyright (c) 2003, 2004 Zultys Technologies
  *
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *   Updated for supporting PPC405EX on Kilauea.
+ *   Tiejun Chen <tiejun.chen@windriver.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk)
 	dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
 	dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
 }
+
+static u8 ibm405ex_fwdv_multi_bits[] = {
+	/* values for:  1 - 16 */
+	0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05,
+	0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03
+};
+
+u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv)
+{
+	u32 index;
+
+	for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++)
+		if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index])
+			return index + 1;
+
+	return 0;
+}
+
+static u8 ibm405ex_fbdv_multi_bits[] = {
+	/* values for:  1 - 100 */
+	0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
+	0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
+	0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
+	0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
+	0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
+	0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
+	0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
+	0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
+	0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
+	0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
+	/* values for:  101 - 200 */
+	0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
+	0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
+	0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
+	0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
+	0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
+	0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
+	0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
+	0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
+	0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
+	0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
+	/* values for:  201 - 255 */
+	0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
+	0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
+	0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
+	0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
+	0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
+	0x03, 0x87, 0x0f, 0x9f, 0x3f  /* END */
+};
+
+u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv)
+{
+	u32 index;
+
+	for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++)
+		if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index])
+			return index + 1;
+
+	return 0;
+}
+
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk)
+{
+	/* PLL config */
+	u32 pllc  = CPR0_READ(DCRN_CPR0_PLLC);
+	u32 plld  = CPR0_READ(DCRN_CPR0_PLLD);
+	u32 cpud  = CPR0_READ(DCRN_CPR0_PRIMAD);
+	u32 plbd  = CPR0_READ(DCRN_CPR0_PRIMBD);
+	u32 opbd  = CPR0_READ(DCRN_CPR0_OPBD);
+	u32 perd  = CPR0_READ(DCRN_CPR0_PERD);
+
+	/* Dividers */
+	u32 fbdv   = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1));
+
+	u32 fwdva  = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1));
+
+	u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8);
+
+	/* PLBDV0 is hardwared to 010. */
+	u32 plbdv0 = 2;
+	u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8);
+
+	u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4);
+
+	u32 perdv0 = __fix_zero((perd >> 24) & 3, 4);
+
+	/* Resulting clocks */
+	u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1;
+
+	/* PLL's VCO is the source for primary forward ? */
+	if (pllc & 0x40000000) {
+		u32 m;
+
+		/* Feedback path */
+		switch ((pllc >> 24) & 7) {
+		case 0:
+			/* PLLOUTx */
+			m = fbdv;
+			break;
+		case 1:
+			/* CPU */
+			m = fbdv * fwdva * cpudv0;
+			break;
+		case 5:
+			/* PERClk */
+			m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0;
+			break;
+		default:
+			printf("WARNING ! Invalid PLL feedback source !\n");
+			goto bypass;
+		}
+
+		vco = (unsigned int)(sys_clk * m);
+	} else {
+bypass:
+		/* Bypass system PLL */
+		vco = 0;
+	}
+
+	/* CPU = VCO / ( FWDVA x CPUDV0) */
+	cpu = vco / (fwdva * cpudv0);
+	/* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */
+	plb = vco / (fwdva * plb2xdv0 * plbdv0);
+	/* OPB = PLB / OPBDV0 */
+	opb = plb / opbdv0;
+	/* EBC = OPB / PERDV0 */
+	ebc = opb / perdv0;
+
+	tb = cpu;
+	uart0 = uart1 = uart_clk;
+
+	dt_fixup_cpu_clocks(cpu, tb, 0);
+	dt_fixup_clock("/plb", plb);
+	dt_fixup_clock("/plb/opb", opb);
+	dt_fixup_clock("/plb/opb/ebc", ebc);
+	dt_fixup_clock("/plb/opb/serial@ef600200", uart0);
+	dt_fixup_clock("/plb/opb/serial@ef600300", uart1);
+}
diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h
index 2606e64f0c4..7dc5d45361b 100644
--- a/arch/powerpc/boot/4xx.h
+++ b/arch/powerpc/boot/4xx.h
@@ -21,6 +21,7 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc);
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
 void ibm405ep_fixup_clocks(unsigned int sys_clk);
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk);
 void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
 void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
 			   unsigned int tmr_clk);
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 95b9f534401..645a7c964e5 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -153,9 +153,7 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
 #define DCRN_CPC0_PLLMR1  0xf4
 #define DCRN_CPC0_UCR     0xf5
 
-/* 440GX Clock control etc */
-
-
+/* 440GX/405EX Clock Control reg */
 #define DCRN_CPR0_CLKUPD				0x020
 #define DCRN_CPR0_PLLC					0x040
 #define DCRN_CPR0_PLLD					0x060
-- 
cgit v1.2.3


From c5b20d3926dfc9616265b8ff5967cb7a476f9344 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Sat, 22 Aug 2009 16:03:44 +0000
Subject: powerpc/405ex: support cuImage via included dtb

To support cuImage, we need to initialize the required sections and
ensure that it is built.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/Makefile         |  2 +-
 arch/powerpc/boot/cuboot-kilauea.c | 49 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/boot/cuboot-kilauea.c

(limited to 'arch')

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 5a109a93753..7bfc8ad8779 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -76,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
-		cuboot-acadia.c cuboot-amigaone.c
+		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
diff --git a/arch/powerpc/boot/cuboot-kilauea.c b/arch/powerpc/boot/cuboot-kilauea.c
new file mode 100644
index 00000000000..80cdad6bbc3
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-kilauea.c
@@ -0,0 +1,49 @@
+/*
+ * Old U-boot compatibility for PPC405EX. This image is already included
+ * a dtb.
+ *
+ * Author: Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+#define KILAUEA_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk */
+
+static bd_t bd;
+
+static void kilauea_fixups(void)
+{
+	unsigned long sysclk = 33333333;
+
+	ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK);
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = kilauea_fixups;
+	platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
-- 
cgit v1.2.3


From 8307a98097222f4d9c2e62ebccd6f5df439328de Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:31 +0200
Subject: locking, powerpc: Rename __spin_try_lock() and friends

Needed to avoid namespace conflicts when the common code
function bodies of _spin_try_lock() etc. are moved to a header
file where the function name would be __spin_try_lock().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124415.918799705@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/include/asm/spinlock.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index c3b193121f8..198266cf9e2 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -54,7 +54,7 @@
  * This returns the old value in the lock, so we succeeded
  * in getting the lock if the return value is 0.
  */
-static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
+static inline unsigned long arch_spin_trylock(raw_spinlock_t *lock)
 {
 	unsigned long tmp, token;
 
@@ -76,7 +76,7 @@ static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
 static inline int __raw_spin_trylock(raw_spinlock_t *lock)
 {
 	CLEAR_IO_SYNC;
-	return __spin_trylock(lock) == 0;
+	return arch_spin_trylock(lock) == 0;
 }
 
 /*
@@ -108,7 +108,7 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock)
 {
 	CLEAR_IO_SYNC;
 	while (1) {
-		if (likely(__spin_trylock(lock) == 0))
+		if (likely(arch_spin_trylock(lock) == 0))
 			break;
 		do {
 			HMT_low();
@@ -126,7 +126,7 @@ void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
 
 	CLEAR_IO_SYNC;
 	while (1) {
-		if (likely(__spin_trylock(lock) == 0))
+		if (likely(arch_spin_trylock(lock) == 0))
 			break;
 		local_save_flags(flags_dis);
 		local_irq_restore(flags);
@@ -181,7 +181,7 @@ extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
  * This returns the old value in the lock + 1,
  * so we got a read lock if the return value is > 0.
  */
-static inline long __read_trylock(raw_rwlock_t *rw)
+static inline long arch_read_trylock(raw_rwlock_t *rw)
 {
 	long tmp;
 
@@ -205,7 +205,7 @@ static inline long __read_trylock(raw_rwlock_t *rw)
  * This returns the old value in the lock,
  * so we got the write lock if the return value is 0.
  */
-static inline long __write_trylock(raw_rwlock_t *rw)
+static inline long arch_write_trylock(raw_rwlock_t *rw)
 {
 	long tmp, token;
 
@@ -228,7 +228,7 @@ static inline long __write_trylock(raw_rwlock_t *rw)
 static inline void __raw_read_lock(raw_rwlock_t *rw)
 {
 	while (1) {
-		if (likely(__read_trylock(rw) > 0))
+		if (likely(arch_read_trylock(rw) > 0))
 			break;
 		do {
 			HMT_low();
@@ -242,7 +242,7 @@ static inline void __raw_read_lock(raw_rwlock_t *rw)
 static inline void __raw_write_lock(raw_rwlock_t *rw)
 {
 	while (1) {
-		if (likely(__write_trylock(rw) == 0))
+		if (likely(arch_write_trylock(rw) == 0))
 			break;
 		do {
 			HMT_low();
@@ -255,12 +255,12 @@ static inline void __raw_write_lock(raw_rwlock_t *rw)
 
 static inline int __raw_read_trylock(raw_rwlock_t *rw)
 {
-	return __read_trylock(rw) > 0;
+	return arch_read_trylock(rw) > 0;
 }
 
 static inline int __raw_write_trylock(raw_rwlock_t *rw)
 {
-	return __write_trylock(rw) == 0;
+	return arch_write_trylock(rw) == 0;
 }
 
 static inline void __raw_read_unlock(raw_rwlock_t *rw)
-- 
cgit v1.2.3


From 9f34ceb60357a7166c929d7b52bd057ad7ffc54b Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:32 +0200
Subject: locking, sparc: Rename __spin_try_lock() and friends

Needed to avoid namespace conflicts when the common code
function bodies of _spin_try_lock() etc. are moved to a header
file where the function name would be __spin_try_lock().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124416.306495811@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/spinlock_32.h | 12 ++++++------
 arch/sparc/include/asm/spinlock_64.h | 28 ++++++++++++++--------------
 2 files changed, 20 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
index 46f91ab66a5..857630cff63 100644
--- a/arch/sparc/include/asm/spinlock_32.h
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -76,7 +76,7 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lock)
  *
  * Unfortunately this scheme limits us to ~16,000,000 cpus.
  */
-static inline void __read_lock(raw_rwlock_t *rw)
+static inline void arch_read_lock(raw_rwlock_t *rw)
 {
 	register raw_rwlock_t *lp asm("g1");
 	lp = rw;
@@ -92,11 +92,11 @@ static inline void __read_lock(raw_rwlock_t *rw)
 #define __raw_read_lock(lock) \
 do {	unsigned long flags; \
 	local_irq_save(flags); \
-	__read_lock(lock); \
+	arch_read_lock(lock); \
 	local_irq_restore(flags); \
 } while(0)
 
-static inline void __read_unlock(raw_rwlock_t *rw)
+static inline void arch_read_unlock(raw_rwlock_t *rw)
 {
 	register raw_rwlock_t *lp asm("g1");
 	lp = rw;
@@ -112,7 +112,7 @@ static inline void __read_unlock(raw_rwlock_t *rw)
 #define __raw_read_unlock(lock) \
 do {	unsigned long flags; \
 	local_irq_save(flags); \
-	__read_unlock(lock); \
+	arch_read_unlock(lock); \
 	local_irq_restore(flags); \
 } while(0)
 
@@ -150,7 +150,7 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 	return (val == 0);
 }
 
-static inline int __read_trylock(raw_rwlock_t *rw)
+static inline int arch_read_trylock(raw_rwlock_t *rw)
 {
 	register raw_rwlock_t *lp asm("g1");
 	register int res asm("o0");
@@ -169,7 +169,7 @@ static inline int __read_trylock(raw_rwlock_t *rw)
 ({	unsigned long flags; \
 	int res; \
 	local_irq_save(flags); \
-	res = __read_trylock(lock); \
+	res = arch_read_trylock(lock); \
 	local_irq_restore(flags); \
 	res; \
 })
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
index f6b2b92ad8d..43e51478358 100644
--- a/arch/sparc/include/asm/spinlock_64.h
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -92,7 +92,7 @@ static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long fla
 
 /* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
 
-static void inline __read_lock(raw_rwlock_t *lock)
+static void inline arch_read_lock(raw_rwlock_t *lock)
 {
 	unsigned long tmp1, tmp2;
 
@@ -115,7 +115,7 @@ static void inline __read_lock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static int inline __read_trylock(raw_rwlock_t *lock)
+static int inline arch_read_trylock(raw_rwlock_t *lock)
 {
 	int tmp1, tmp2;
 
@@ -136,7 +136,7 @@ static int inline __read_trylock(raw_rwlock_t *lock)
 	return tmp1;
 }
 
-static void inline __read_unlock(raw_rwlock_t *lock)
+static void inline arch_read_unlock(raw_rwlock_t *lock)
 {
 	unsigned long tmp1, tmp2;
 
@@ -152,7 +152,7 @@ static void inline __read_unlock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static void inline __write_lock(raw_rwlock_t *lock)
+static void inline arch_write_lock(raw_rwlock_t *lock)
 {
 	unsigned long mask, tmp1, tmp2;
 
@@ -177,7 +177,7 @@ static void inline __write_lock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static void inline __write_unlock(raw_rwlock_t *lock)
+static void inline arch_write_unlock(raw_rwlock_t *lock)
 {
 	__asm__ __volatile__(
 "	stw		%%g0, [%0]"
@@ -186,7 +186,7 @@ static void inline __write_unlock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static int inline __write_trylock(raw_rwlock_t *lock)
+static int inline arch_write_trylock(raw_rwlock_t *lock)
 {
 	unsigned long mask, tmp1, tmp2, result;
 
@@ -210,14 +210,14 @@ static int inline __write_trylock(raw_rwlock_t *lock)
 	return result;
 }
 
-#define __raw_read_lock(p)	__read_lock(p)
-#define __raw_read_lock_flags(p, f) __read_lock(p)
-#define __raw_read_trylock(p)	__read_trylock(p)
-#define __raw_read_unlock(p)	__read_unlock(p)
-#define __raw_write_lock(p)	__write_lock(p)
-#define __raw_write_lock_flags(p, f) __write_lock(p)
-#define __raw_write_unlock(p)	__write_unlock(p)
-#define __raw_write_trylock(p)	__write_trylock(p)
+#define __raw_read_lock(p)	arch_read_lock(p)
+#define __raw_read_lock_flags(p, f) arch_read_lock(p)
+#define __raw_read_trylock(p)	arch_read_trylock(p)
+#define __raw_read_unlock(p)	arch_read_unlock(p)
+#define __raw_write_lock(p)	arch_write_lock(p)
+#define __raw_write_lock_flags(p, f) arch_write_lock(p)
+#define __raw_write_unlock(p)	arch_write_unlock(p)
+#define __raw_write_trylock(p)	arch_write_trylock(p)
 
 #define __raw_read_can_lock(rw)		(!((rw)->lock & 0x80000000UL))
 #define __raw_write_can_lock(rw)	(!(rw)->lock)
-- 
cgit v1.2.3


From f159ee782990aacb5494738c98f13a2aa61dbb4a Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:33 +0200
Subject: locking, m68k/asm-offsets: Rename pt_regs offset defines

In order to be able to use asm-offsets.h in C files the
existing namespace conflicts must be solved first. In
asm-offsets.h e.g. PT_D0 gets defined which is the offset of
the d0 member of the pt_regs structure. However a same define
(with a different meaning) exists in asm/ptregs.h.

So rename the defines created with the asm-offset mechanism to
PT_OFF_D0 etc. There also already exist a few defines with
these names that have the same meaning. So remove the existing
defines and use the asm-offset generated ones.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124416.666403991@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/m68k/include/asm/entry_mm.h |  3 ---
 arch/m68k/include/asm/entry_no.h |  8 ++++----
 arch/m68k/include/asm/math-emu.h | 20 ++++++++++----------
 arch/m68k/kernel/asm-offsets.c   | 26 +++++++++++++-------------
 arch/m68k/kernel/entry.S         | 22 +++++++++++-----------
 arch/m68k/math-emu/fp_entry.S    | 30 +++++++++++++++---------------
 6 files changed, 53 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h
index 5202f5a5b42..4fcfc28c061 100644
--- a/arch/m68k/include/asm/entry_mm.h
+++ b/arch/m68k/include/asm/entry_mm.h
@@ -118,9 +118,6 @@ PT_DTRACE_BIT = 2
 #define STR(X) STR1(X)
 #define STR1(X) #X
 
-#define PT_OFF_ORIG_D0	 0x24
-#define PT_OFF_FORMATVEC 0x32
-#define PT_OFF_SR	 0x2C
 #define SAVE_ALL_INT				\
 	"clrl	%%sp@-;"    /* stk_adj */	\
 	"pea	-1:w;"	    /* orig d0 = -1 */	\
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
index c2553d26273..907ed03d792 100644
--- a/arch/m68k/include/asm/entry_no.h
+++ b/arch/m68k/include/asm/entry_no.h
@@ -72,8 +72,8 @@ LENOSYS = 38
 	lea	%sp@(-32),%sp		/* space for 8 regs */
 	moveml	%d1-%d5/%a0-%a2,%sp@
 	movel	sw_usp,%a0		/* get usp */
-	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
-	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+	movel	%a0@-,%sp@(PT_OFF_PC)	/* copy exception program counter */
+	movel	%a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
 	bra	7f
 	6:
 	clrl	%sp@-			/* stkadj */
@@ -89,8 +89,8 @@ LENOSYS = 38
 	bnes	8f			/* no, skip */
 	move	#0x2700,%sr		/* disable intrs */
 	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
 	moveml	%sp@,%d1-%d5/%a0-%a2
 	lea	%sp@(32),%sp		/* space for 8 regs */
 	movel	%sp@+,%d0
diff --git a/arch/m68k/include/asm/math-emu.h b/arch/m68k/include/asm/math-emu.h
index ddfab96403c..5e9249b0014 100644
--- a/arch/m68k/include/asm/math-emu.h
+++ b/arch/m68k/include/asm/math-emu.h
@@ -145,16 +145,16 @@ extern unsigned int fp_debugprint;
  * these are only used during instruction decoding
  * where we always know how deep we're on the stack.
  */
-#define FPS_DO		(PT_D0)
-#define FPS_D1		(PT_D1)
-#define FPS_D2		(PT_D2)
-#define FPS_A0		(PT_A0)
-#define FPS_A1		(PT_A1)
-#define FPS_A2		(PT_A2)
-#define FPS_SR		(PT_SR)
-#define FPS_PC		(PT_PC)
-#define FPS_EA		(PT_PC+6)
-#define FPS_PC2		(PT_PC+10)
+#define FPS_DO		(PT_OFF_D0)
+#define FPS_D1		(PT_OFF_D1)
+#define FPS_D2		(PT_OFF_D2)
+#define FPS_A0		(PT_OFF_A0)
+#define FPS_A1		(PT_OFF_A1)
+#define FPS_A2		(PT_OFF_A2)
+#define FPS_SR		(PT_OFF_SR)
+#define FPS_PC		(PT_OFF_PC)
+#define FPS_EA		(PT_OFF_PC+6)
+#define FPS_PC2		(PT_OFF_PC+10)
 
 .macro	fp_get_fp_reg
 	lea	(FPD_FPREG,FPDATA,%d0.w*4),%a0
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index b1f012f6c49..0cffab8d244 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -44,20 +44,20 @@ int main(void)
 	DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
 
 	/* offsets into the pt_regs */
-	DEFINE(PT_D0, offsetof(struct pt_regs, d0));
-	DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
-	DEFINE(PT_D1, offsetof(struct pt_regs, d1));
-	DEFINE(PT_D2, offsetof(struct pt_regs, d2));
-	DEFINE(PT_D3, offsetof(struct pt_regs, d3));
-	DEFINE(PT_D4, offsetof(struct pt_regs, d4));
-	DEFINE(PT_D5, offsetof(struct pt_regs, d5));
-	DEFINE(PT_A0, offsetof(struct pt_regs, a0));
-	DEFINE(PT_A1, offsetof(struct pt_regs, a1));
-	DEFINE(PT_A2, offsetof(struct pt_regs, a2));
-	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
-	DEFINE(PT_SR, offsetof(struct pt_regs, sr));
+	DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
+	DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+	DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
+	DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
+	DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
+	DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
+	DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
+	DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
+	DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
+	DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
+	DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
+	DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
 	/* bitfields are a bit difficult */
-	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
+	DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
 
 	/* offsets into the irq_handler struct */
 	DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index c3735cd6207..922f52e7ed1 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -77,17 +77,17 @@ ENTRY(ret_from_fork)
 	jra	.Lret_from_exception
 
 do_trace_entry:
-	movel	#-ENOSYS,%sp@(PT_D0)	| needed for strace
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
-	movel	%sp@(PT_ORIG_D0),%d0
+	movel	%sp@(PT_OFF_ORIG_D0),%d0
 	cmpl	#NR_syscalls,%d0
 	jcs	syscall
 badsys:
-	movel	#-ENOSYS,%sp@(PT_D0)
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)
 	jra	ret_from_syscall
 
 do_trace_exit:
@@ -103,7 +103,7 @@ ENTRY(ret_from_signal)
 	addql	#4,%sp
 /* on 68040 complete pending writebacks if any */
 #ifdef CONFIG_M68040
-	bfextu	%sp@(PT_VECTOR){#0,#4},%d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#0,#4},%d0
 	subql	#7,%d0				| bus error frame ?
 	jbne	1f
 	movel	%sp,%sp@-
@@ -127,7 +127,7 @@ ENTRY(system_call)
 	jcc	badsys
 syscall:
 	jbsr	@(sys_call_table,%d0:l:4)@(0)
-	movel	%d0,%sp@(PT_D0)		| save the return value
+	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
 ret_from_syscall:
 	|oriw	#0x0700,%sr
 	movew	%curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
@@ -135,7 +135,7 @@ ret_from_syscall:
 1:	RESTORE_ALL
 
 syscall_exit_work:
-	btst	#5,%sp@(PT_SR)		| check if returning to kernel
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
 	bnes	1b			| if so, skip resched, signals
 	lslw	#1,%d0
 	jcs	do_trace_exit
@@ -148,7 +148,7 @@ syscall_exit_work:
 
 ENTRY(ret_from_exception)
 .Lret_from_exception:
-	btst	#5,%sp@(PT_SR)		| check if returning to kernel
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
 	bnes	1f			| if so, skip resched, signals
 	| only allow interrupts when we are really the last one on the
 	| kernel stack, otherwise stack overflow can occur during
@@ -182,7 +182,7 @@ do_signal_return:
 	jbra	resume_userspace
 
 do_delayed_trace:
-	bclr	#7,%sp@(PT_SR)		| clear trace bit in SR
+	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
 	pea	1			| send SIGTRAP
 	movel	%curptr,%sp@-
 	pea	LSIGTRAP
@@ -199,7 +199,7 @@ ENTRY(auto_inthandler)
 	GET_CURRENT(%d0)
 	addqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
 					|  put exception # in d0
-	bfextu	%sp@(PT_VECTOR){#4,#10},%d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
 	subw	#VEC_SPUR,%d0
 
 	movel	%sp,%sp@-
@@ -216,7 +216,7 @@ ret_from_interrupt:
 	ALIGN
 ret_from_last_interrupt:
 	moveq	#(~ALLOWINT>>8)&0xff,%d0
-	andb	%sp@(PT_SR),%d0
+	andb	%sp@(PT_OFF_SR),%d0
 	jne	2b
 
 	/* check if we need to do software interrupts */
@@ -232,7 +232,7 @@ ENTRY(user_inthandler)
 	GET_CURRENT(%d0)
 	addqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
 					|  put exception # in d0
-	bfextu	%sp@(PT_VECTOR){#4,#10},%d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
 user_irqvec_fixup = . + 2
 	subw	#VEC_USER,%d0
 
diff --git a/arch/m68k/math-emu/fp_entry.S b/arch/m68k/math-emu/fp_entry.S
index 954b4f304a7..916c6f3d1f0 100644
--- a/arch/m68k/math-emu/fp_entry.S
+++ b/arch/m68k/math-emu/fp_entry.S
@@ -122,17 +122,17 @@ fp_get_data_reg:
 	.long	fp_get_d6, fp_get_d7
 
 fp_get_d0:
-	move.l	(PT_D0+8,%sp),%d0
+	move.l	(PT_OFF_D0+8,%sp),%d0
 	printf	PREGISTER,"{d0->%08x}",1,%d0
 	rts
 
 fp_get_d1:
-	move.l	(PT_D1+8,%sp),%d0
+	move.l	(PT_OFF_D1+8,%sp),%d0
 	printf	PREGISTER,"{d1->%08x}",1,%d0
 	rts
 
 fp_get_d2:
-	move.l	(PT_D2+8,%sp),%d0
+	move.l	(PT_OFF_D2+8,%sp),%d0
 	printf	PREGISTER,"{d2->%08x}",1,%d0
 	rts
 
@@ -173,35 +173,35 @@ fp_put_data_reg:
 
 fp_put_d0:
 	printf	PREGISTER,"{d0<-%08x}",1,%d0
-	move.l	%d0,(PT_D0+8,%sp)
+	move.l	%d0,(PT_OFF_D0+8,%sp)
 	rts
 
 fp_put_d1:
 	printf	PREGISTER,"{d1<-%08x}",1,%d0
-	move.l	%d0,(PT_D1+8,%sp)
+	move.l	%d0,(PT_OFF_D1+8,%sp)
 	rts
 
 fp_put_d2:
 	printf	PREGISTER,"{d2<-%08x}",1,%d0
-	move.l	%d0,(PT_D2+8,%sp)
+	move.l	%d0,(PT_OFF_D2+8,%sp)
 	rts
 
 fp_put_d3:
 	printf	PREGISTER,"{d3<-%08x}",1,%d0
 |	move.l	%d0,%d3
-	move.l	%d0,(PT_D3+8,%sp)
+	move.l	%d0,(PT_OFF_D3+8,%sp)
 	rts
 
 fp_put_d4:
 	printf	PREGISTER,"{d4<-%08x}",1,%d0
 |	move.l	%d0,%d4
-	move.l	%d0,(PT_D4+8,%sp)
+	move.l	%d0,(PT_OFF_D4+8,%sp)
 	rts
 
 fp_put_d5:
 	printf	PREGISTER,"{d5<-%08x}",1,%d0
 |	move.l	%d0,%d5
-	move.l	%d0,(PT_D5+8,%sp)
+	move.l	%d0,(PT_OFF_D5+8,%sp)
 	rts
 
 fp_put_d6:
@@ -225,17 +225,17 @@ fp_get_addr_reg:
 	.long	fp_get_a6, fp_get_a7
 
 fp_get_a0:
-	move.l	(PT_A0+8,%sp),%a0
+	move.l	(PT_OFF_A0+8,%sp),%a0
 	printf	PREGISTER,"{a0->%08x}",1,%a0
 	rts
 
 fp_get_a1:
-	move.l	(PT_A1+8,%sp),%a0
+	move.l	(PT_OFF_A1+8,%sp),%a0
 	printf	PREGISTER,"{a1->%08x}",1,%a0
 	rts
 
 fp_get_a2:
-	move.l	(PT_A2+8,%sp),%a0
+	move.l	(PT_OFF_A2+8,%sp),%a0
 	printf	PREGISTER,"{a2->%08x}",1,%a0
 	rts
 
@@ -276,17 +276,17 @@ fp_put_addr_reg:
 
 fp_put_a0:
 	printf	PREGISTER,"{a0<-%08x}",1,%a0
-	move.l	%a0,(PT_A0+8,%sp)
+	move.l	%a0,(PT_OFF_A0+8,%sp)
 	rts
 
 fp_put_a1:
 	printf	PREGISTER,"{a1<-%08x}",1,%a0
-	move.l	%a0,(PT_A1+8,%sp)
+	move.l	%a0,(PT_OFF_A1+8,%sp)
 	rts
 
 fp_put_a2:
 	printf	PREGISTER,"{a2<-%08x}",1,%a0
-	move.l	%a0,(PT_A2+8,%sp)
+	move.l	%a0,(PT_OFF_A2+8,%sp)
 	rts
 
 fp_put_a3:
-- 
cgit v1.2.3


From 0ee000e5e8fa2e5c760250be0d78d5906e3eb94b Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:35 +0200
Subject: locking, m68k: Calculate thread_info offset with asm offset

m68k has the thread_info structure embedded in its task struct.
Therefore its not possible to implement current_thread_info()
by looking at the stack pointer and do some simple calculations
like most other architectures do it.

To return the thread_info pointer for a task two defines are
used. This works until the spinlock function bodies get moved
into an own header file and CONFIG_SPINLOCK_DEBUG is turned on.
That results into this compile error:

  In file included from include/linux/spinlock.h:378,
                   from include/linux/seqlock.h:29,
                   from include/linux/time.h:8,
                   from include/linux/timex.h:56,
                   from include/linux/sched.h:54,
                   from arch/m68k/kernel/asm-offsets.c:12:
  include/linux/spinlock_api_smp.h: In function '__spin_unlock_irq':
  include/linux/spinlock_api_smp.h:371: error: 'current' undeclared (first use in this function)
  include/linux/spinlock_api_smp.h:371: error: (Each undeclared identifier is reported only once
  include/linux/spinlock_api_smp.h:371: error: for each function it appears in.)

Including asm/current.h to asm-offsets.c wouldn't help since
the definition of struct task is needed. So we end up with ugly
header file include dependencies.

To solve this calculate the offset of the thread_info structure
into the task struct in asm-offsets.h and use the offset in
task_thread_info(). This works just like it does for IA64 as
well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124417.329662275@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/m68k/include/asm/thread_info_mm.h | 11 ++++++++++-
 arch/m68k/kernel/asm-offsets.c         |  5 +++++
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index 6ea5c33b3c5..b6da3882be9 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -1,6 +1,10 @@
 #ifndef _ASM_M68K_THREAD_INFO_H
 #define _ASM_M68K_THREAD_INFO_H
 
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+#include <asm/current.h>
 #include <asm/types.h>
 #include <asm/page.h>
 
@@ -31,7 +35,12 @@ struct thread_info {
 #define init_thread_info	(init_task.thread.info)
 #define init_stack		(init_thread_union.stack)
 
-#define task_thread_info(tsk)	(&(tsk)->thread.info)
+#ifdef ASM_OFFSETS_C
+#define task_thread_info(tsk)	((struct thread_info *) NULL)
+#else
+#define task_thread_info(tsk)	((struct thread_info *)((char *)tsk+TASK_TINFO))
+#endif
+
 #define task_stack_page(tsk)	((tsk)->stack)
 #define current_thread_info()	task_thread_info(current)
 
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 0cffab8d244..25d6b721522 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -8,6 +8,8 @@
  * #defines from the assembly-language output.
  */
 
+#define ASM_OFFSETS_C
+
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
@@ -27,6 +29,9 @@ int main(void)
 	DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
 	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
 	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+#ifdef CONFIG_MMU
+	DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
+#endif
 
 	/* offsets into the thread struct */
 	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
-- 
cgit v1.2.3


From b62e180cae6bd82e246d871a1e44e03f8019d421 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:39 +0200
Subject: locking: Inline spinlock code for all locking variants on s390

Speeds up several benchmarks in a measurable way, so inline
all spin-lock variants by default.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124419.319518405@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/s390/include/asm/spinlock.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index c9af0d19c7a..41ce6861174 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -191,4 +191,33 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
+#define __always_inline__spin_lock
+#define __always_inline__read_lock
+#define __always_inline__write_lock
+#define __always_inline__spin_lock_bh
+#define __always_inline__read_lock_bh
+#define __always_inline__write_lock_bh
+#define __always_inline__spin_lock_irq
+#define __always_inline__read_lock_irq
+#define __always_inline__write_lock_irq
+#define __always_inline__spin_lock_irqsave
+#define __always_inline__read_lock_irqsave
+#define __always_inline__write_lock_irqsave
+#define __always_inline__spin_trylock
+#define __always_inline__read_trylock
+#define __always_inline__write_trylock
+#define __always_inline__spin_trylock_bh
+#define __always_inline__spin_unlock
+#define __always_inline__read_unlock
+#define __always_inline__write_unlock
+#define __always_inline__spin_unlock_bh
+#define __always_inline__read_unlock_bh
+#define __always_inline__write_unlock_bh
+#define __always_inline__spin_unlock_irq
+#define __always_inline__read_unlock_irq
+#define __always_inline__write_unlock_irq
+#define __always_inline__spin_unlock_irqrestore
+#define __always_inline__read_unlock_irqrestore
+#define __always_inline__write_unlock_irqrestore
+
 #endif /* __ASM_SPINLOCK_H */
-- 
cgit v1.2.3


From d8fb91e8344ff11381fc47d43e0b234065be4bd0 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Fri, 26 Jun 2009 08:14:36 +0200
Subject: CRIS: add pgprot_noncached

On CRIS, the high address bit controls caching, which means that
we can add a pgprot_noncached() macro that sets this bit in the
address.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/include/arch-v10/arch/mmu.h |  9 +++++----
 arch/cris/include/arch-v32/arch/mmu.h | 10 ++++++----
 arch/cris/include/asm/pgtable.h       |  2 ++
 3 files changed, 13 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/cris/include/arch-v10/arch/mmu.h b/arch/cris/include/arch-v10/arch/mmu.h
index df84f1716e6..e829e5a37bb 100644
--- a/arch/cris/include/arch-v10/arch/mmu.h
+++ b/arch/cris/include/arch-v10/arch/mmu.h
@@ -33,10 +33,10 @@ typedef struct
 
 /* CRIS PTE bits (see R_TLB_LO in the register description)
  *
- *   Bit:  31-13 12-------4    3        2       1       0  
- *         ________________________________________________
- *        | pfn | reserved | global | valid | kernel | we  |
- *        |_____|__________|________|_______|________|_____|
+ *   Bit:  31     30-13 12-------4    3        2       1       0
+ *         _______________________________________________________
+ *        | cache |pfn | reserved | global | valid | kernel | we  |
+ *        |_______|____|__________|________|_______|________|_____|
  *
  * (pfn = physical frame number)
  */
@@ -53,6 +53,7 @@ typedef struct
 #define _PAGE_VALID	   (1<<2) /* page is valid */
 #define _PAGE_SILENT_READ  (1<<2) /* synonym */
 #define _PAGE_GLOBAL       (1<<3) /* global page - context is ignored */
+#define _PAGE_NO_CACHE	   (1<<31) /* part of the uncached memory map */
 
 /* Bits the HW doesn't care about but the kernel uses them in SW */
 
diff --git a/arch/cris/include/arch-v32/arch/mmu.h b/arch/cris/include/arch-v32/arch/mmu.h
index 6bcdc3fdf7d..c1a13e05e96 100644
--- a/arch/cris/include/arch-v32/arch/mmu.h
+++ b/arch/cris/include/arch-v32/arch/mmu.h
@@ -28,10 +28,10 @@ typedef struct
 /*
  * CRISv32 PTE bits:
  *
- *  Bit:  31-13  12-5     4        3       2        1        0
- *       +-----+------+--------+-------+--------+-------+---------+
- *       | pfn | zero | global | valid | kernel | write | execute |
- *       +-----+------+--------+-------+--------+-------+---------+
+ *  Bit:   31     30-13  12-5     4        3       2        1        0
+ *       +-------+-----+------+--------+-------+--------+-------+---------+
+ *       | cache | pfn | zero | global | valid | kernel | write | execute |
+ *       +-------+-----+------+--------+-------+--------+-------+---------+
  */
 
 /*
@@ -45,6 +45,8 @@ typedef struct
 #define _PAGE_VALID         (1 << 3)	/* Page is valid. */
 #define _PAGE_SILENT_READ   (1 << 3)	/* Same as above. */
 #define _PAGE_GLOBAL        (1 << 4)	/* Global page. */
+#define _PAGE_NO_CACHE	    (1 << 31)	/* part of the uncached memory map */
+
 
 /*
  * The hardware doesn't care about these bits, but the kernel uses them in
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 50aa974aa83..1fcce00f01f 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -197,6 +197,8 @@ static inline pte_t __mk_pte(void * page, pgprot_t pgprot)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 { pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
 
+#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) | _PAGE_NO_CACHE))
+
 
 /* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval
  * __pte_page(pte_val) refers to the "virtual" DRAM interval
-- 
cgit v1.2.3


From bc07844a33734c4b2f32ef26d942d2f3ef9302ea Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 29 Aug 2009 18:09:57 +0200
Subject: x86: Distangle ioapic and i8259

The proposed Moorestown support patches use an extra feature flag
mechanism to make the ioapic work w/o an i8259. There is a much
simpler solution.

Most i8259 specific functions are already called dependend on the irq
number less than NR_IRQS_LEGACY. Replacing that constant by a
read_mostly variable which can be set to 0 by the platform setup code
allows us to achieve the same without any special feature flags.

That trivial change allows us to proceed with MRST w/o doing a full
blown overhaul of the ioapic code which would delay MRST unduly.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/io_apic.h |  2 ++
 arch/x86/kernel/apic/io_apic.c | 41 +++++++++++++++++++++++++++++------------
 2 files changed, 31 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 2b8aeb89933..e1f89a1a07e 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -143,6 +143,8 @@ extern int noioapicreroute;
 /* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */
 extern int timer_through_8259;
 
+extern void io_apic_disable_legacy(void);
+
 /*
  * If we use the IO-APIC for IRQ routing, disable automatic
  * assignment of PCI IRQ's.
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 5f4687187ce..6c961290a5f 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -91,6 +91,11 @@ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 /* # of MP IRQ source entries */
 int mp_irq_entries;
 
+/* Number of legacy interrupts */
+static int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY;
+/* GSI interrupts */
+static int nr_irqs_gsi = NR_IRQS_LEGACY;
+
 #if defined (CONFIG_MCA) || defined (CONFIG_EISA)
 int mp_bus_id_to_type[MAX_MP_BUSSES];
 #endif
@@ -172,6 +177,12 @@ static struct irq_cfg irq_cfgx[NR_IRQS] = {
 	[15] = { .vector = IRQ15_VECTOR, },
 };
 
+void __init io_apic_disable_legacy(void)
+{
+	nr_legacy_irqs = 0;
+	nr_irqs_gsi = 0;
+}
+
 int __init arch_early_irq_init(void)
 {
 	struct irq_cfg *cfg;
@@ -189,7 +200,7 @@ int __init arch_early_irq_init(void)
 		desc->chip_data = &cfg[i];
 		zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node);
 		zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node);
-		if (i < NR_IRQS_LEGACY)
+		if (i < nr_legacy_irqs)
 			cpumask_setall(cfg[i].domain);
 	}
 
@@ -883,7 +894,7 @@ static int __init find_isa_irq_apic(int irq, int type)
  */
 static int EISA_ELCR(unsigned int irq)
 {
-	if (irq < NR_IRQS_LEGACY) {
+	if (irq < nr_legacy_irqs) {
 		unsigned int port = 0x4d0 + (irq >> 3);
 		return (inb(port) >> (irq & 7)) & 1;
 	}
@@ -1480,7 +1491,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq
 	}
 
 	ioapic_register_intr(irq, desc, trigger);
-	if (irq < NR_IRQS_LEGACY)
+	if (irq < nr_legacy_irqs)
 		disable_8259A_irq(irq);
 
 	ioapic_write_entry(apic_id, pin, entry);
@@ -1851,7 +1862,7 @@ __apicdebuginit(void) print_PIC(void)
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET)
+	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1914,6 +1925,10 @@ void __init enable_IO_APIC(void)
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
 	}
+
+	if (!nr_legacy_irqs)
+		return;
+
 	for(apic = 0; apic < nr_ioapics; apic++) {
 		int pin;
 		/* See if any of the pins is in ExtINT mode */
@@ -1968,6 +1983,9 @@ void disable_IO_APIC(void)
 	 */
 	clear_IO_APIC();
 
+	if (!nr_legacy_irqs)
+		return;
+
 	/*
 	 * If the i8259 is routed through an IOAPIC
 	 * Put that IOAPIC in virtual wire mode
@@ -2198,7 +2216,7 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 	struct irq_cfg *cfg;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	if (irq < NR_IRQS_LEGACY) {
+	if (irq < nr_legacy_irqs) {
 		disable_8259A_irq(irq);
 		if (i8259A_irq_pending(irq))
 			was_pending = 1;
@@ -2709,7 +2727,7 @@ static inline void init_IO_APIC_traps(void)
 			 * so default to an old-fashioned 8259
 			 * interrupt if we can..
 			 */
-			if (irq < NR_IRQS_LEGACY)
+			if (irq < nr_legacy_irqs)
 				make_8259A_irq(irq);
 			else
 				/* Strange. Oh, well.. */
@@ -3045,7 +3063,7 @@ out:
  * the I/O APIC in all cases now.  No actual device should request
  * it anyway.  --macro
  */
-#define PIC_IRQS	(1 << PIC_CASCADE_IR)
+#define PIC_IRQS	(1UL << PIC_CASCADE_IR)
 
 void __init setup_IO_APIC(void)
 {
@@ -3053,8 +3071,7 @@ void __init setup_IO_APIC(void)
 	/*
 	 * calling enable_IO_APIC() is moved to setup_local_APIC for BP
 	 */
-
-	io_apic_irqs = ~PIC_IRQS;
+	io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL;
 
 	apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
 	/*
@@ -3065,7 +3082,8 @@ void __init setup_IO_APIC(void)
 	sync_Arb_IDs();
 	setup_IO_APIC_irqs();
 	init_IO_APIC_traps();
-	check_timer();
+	if (nr_legacy_irqs)
+		check_timer();
 }
 
 /*
@@ -3166,7 +3184,6 @@ static int __init ioapic_init_sysfs(void)
 
 device_initcall(ioapic_init_sysfs);
 
-static int nr_irqs_gsi = NR_IRQS_LEGACY;
 /*
  * Dynamic irq allocate and deallocation
  */
@@ -3907,7 +3924,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
 	/*
 	 * IRQs < 16 are already in the irq_2_pin[] map
 	 */
-	if (irq >= NR_IRQS_LEGACY) {
+	if (irq >= nr_legacy_irqs) {
 		cfg = desc->chip_data;
 		add_pin_to_irq_node(cfg, node, ioapic, pin);
 	}
-- 
cgit v1.2.3


From e11dadabf443dc3101f28b74d8b9d56870a87db4 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 31 Aug 2009 15:18:40 +0200
Subject: x86: apic namespace cleanup

boot_cpu_physical_apicid is a global variable and used as function
argument as well. Rename the function arguments to avoid confusion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/apic.h      | 14 +++++++-------
 arch/x86/kernel/apic/bigsmp_32.c |  2 +-
 arch/x86/kernel/apic/numaq_32.c  |  2 +-
 arch/x86/kernel/apic/summit_32.c |  2 +-
 arch/x86/kernel/setup.c          |  4 ++--
 5 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 6f15b29005a..d6a0f2636a6 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -292,7 +292,7 @@ struct apic {
 	int (*cpu_present_to_apicid)(int mps_cpu);
 	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
 	void (*setup_portio_remap)(void);
-	int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
+	int (*check_phys_apicid_present)(int phys_apicid);
 	void (*enable_apic_mode)(void);
 	int (*phys_pkg_id)(int cpuid_apic, int index_msb);
 
@@ -426,7 +426,7 @@ extern struct apic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 
 extern int default_cpu_present_to_apicid(int mps_cpu);
-extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
+extern int default_check_phys_apicid_present(int phys_apicid);
 #endif
 
 static inline void default_wait_for_init_deassert(atomic_t *deassert)
@@ -542,9 +542,9 @@ static inline int __default_cpu_present_to_apicid(int mps_cpu)
 }
 
 static inline int
-__default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+__default_check_phys_apicid_present(int phys_apicid)
 {
-	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+	return physid_isset(phys_apicid, phys_cpu_present_map);
 }
 
 #ifdef CONFIG_X86_32
@@ -554,13 +554,13 @@ static inline int default_cpu_present_to_apicid(int mps_cpu)
 }
 
 static inline int
-default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+default_check_phys_apicid_present(int phys_apicid)
 {
-	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+	return __default_check_phys_apicid_present(phys_apicid);
 }
 #else
 extern int default_cpu_present_to_apicid(int mps_cpu);
-extern int default_check_phys_apicid_present(int boot_cpu_physical_apicid);
+extern int default_check_phys_apicid_present(int phys_apicid);
 #endif
 
 static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 676cdac385c..77a06413b6b 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -112,7 +112,7 @@ static physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
 	return physids_promote(0xFFL);
 }
 
-static int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
+static int bigsmp_check_phys_apicid_present(int phys_apicid)
 {
 	return 1;
 }
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index f1ebed6bd15..efa00e2b850 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -413,7 +413,7 @@ static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
 
-static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid)
+static inline int numaq_check_phys_apicid_present(int phys_apicid)
 {
 	return 1;
 }
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index eafdfbd1ea9..645ecc4ff0b 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -272,7 +272,7 @@ static physid_mask_t summit_apicid_to_cpu_present(int apicid)
 	return physid_mask_of_physid(0);
 }
 
-static int summit_check_phys_apicid_present(int boot_cpu_physical_apicid)
+static int summit_check_phys_apicid_present(int physical_apicid)
 {
 	return 1;
 }
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2d93026af7c..fda22ec1a93 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -129,9 +129,9 @@ int default_cpu_present_to_apicid(int mps_cpu)
 	return __default_cpu_present_to_apicid(mps_cpu);
 }
 
-int default_check_phys_apicid_present(int boot_cpu_physical_apicid)
+int default_check_phys_apicid_present(int phys_apicid)
 {
-	return __default_check_phys_apicid_present(boot_cpu_physical_apicid);
+	return __default_check_phys_apicid_present(phys_apicid);
 }
 #endif
 
-- 
cgit v1.2.3


From 132ec92f3f70fe365c1f4b8d46e66cf8a2a16880 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Mon, 31 Aug 2009 09:50:09 +0200
Subject: x86, msr: Add rd/wrmsr interfaces with preset registers

native_{rdmsr,wrmsr}_safe_regs are two new interfaces which allow
presetting of a subset of eight x86 GPRs before executing the rd/wrmsr
instructions. This is needed at least on AMD K8 for accessing an erratum
workaround MSR.

Originally based on an idea by H. Peter Anvin.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-1-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/msr.h      | 13 ++++++
 arch/x86/include/asm/paravirt.h | 16 +++++++
 arch/x86/kernel/paravirt.c      |  2 +
 arch/x86/lib/Makefile           |  1 +
 arch/x86/lib/msr-reg.S          | 98 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 130 insertions(+)
 create mode 100644 arch/x86/lib/msr-reg.S

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 48ad9d29484..184d4a11396 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -113,6 +113,9 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 
 extern unsigned long long native_read_tsc(void);
 
+extern int native_rdmsr_safe_regs(u32 *regs);
+extern int native_wrmsr_safe_regs(u32 *regs);
+
 static __always_inline unsigned long long __native_read_tsc(void)
 {
 	DECLARE_ARGS(val, low, high);
@@ -189,6 +192,16 @@ static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
 	return err;
 }
 
+static inline int rdmsr_safe_regs(u32 *regs)
+{
+	return native_rdmsr_safe_regs(regs);
+}
+
+static inline int wrmsr_safe_regs(u32 *regs)
+{
+	return native_wrmsr_safe_regs(regs);
+}
+
 #define rdtscl(low)						\
 	((low) = (u32)__native_read_tsc())
 
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 4fb37c8a083..1705944e037 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -168,7 +168,9 @@ struct pv_cpu_ops {
 	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
 	u64 (*read_msr_amd)(unsigned int msr, int *err);
 	u64 (*read_msr)(unsigned int msr, int *err);
+	int (*rdmsr_regs)(u32 *regs);
 	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
+	int (*wrmsr_regs)(u32 *regs);
 
 	u64 (*read_tsc)(void);
 	u64 (*read_pmc)(int counter);
@@ -820,6 +822,12 @@ static inline u64 paravirt_read_msr(unsigned msr, int *err)
 {
 	return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
 }
+
+static inline int paravirt_rdmsr_regs(u32 *regs)
+{
+	return PVOP_CALL1(int, pv_cpu_ops.rdmsr_regs, regs);
+}
+
 static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
 {
 	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
@@ -829,6 +837,11 @@ static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
 	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
 }
 
+static inline int paravirt_wrmsr_regs(u32 *regs)
+{
+	return PVOP_CALL1(int, pv_cpu_ops.wrmsr_regs, regs);
+}
+
 /* These should all do BUG_ON(_err), but our headers are too tangled. */
 #define rdmsr(msr, val1, val2)			\
 do {						\
@@ -862,6 +875,9 @@ do {						\
 	_err;					\
 })
 
+#define rdmsr_safe_regs(regs)	paravirt_rdmsr_regs(regs)
+#define wrmsr_safe_regs(regs)	paravirt_wrmsr_regs(regs)
+
 static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 {
 	int err;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 70ec9b951d7..67594af43b3 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -362,8 +362,10 @@ struct pv_cpu_ops pv_cpu_ops = {
 #endif
 	.wbinvd = native_wbinvd,
 	.read_msr = native_read_msr_safe,
+	.rdmsr_regs = native_rdmsr_safe_regs,
 	.read_msr_amd = native_read_msr_amd_safe,
 	.write_msr = native_write_msr_safe,
+	.wrmsr_regs = native_wrmsr_safe_regs,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 	.read_tscp = native_read_tscp,
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 07c31899c9c..b59c0647d80 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -8,6 +8,7 @@ lib-y := delay.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
+lib-y += msr-reg.o
 
 ifeq ($(CONFIG_X86_32),y)
         obj-y += atomic64_32.o
diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
new file mode 100644
index 00000000000..51f1bb3f8c7
--- /dev/null
+++ b/arch/x86/lib/msr-reg.S
@@ -0,0 +1,98 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/msr.h>
+
+#ifdef CONFIG_X86_64
+/*
+ * int native_{rdmsr,wrmsr}_safe_regs(u32 gprs[8]);
+ *
+ * reg layout: u32 gprs[eax, ecx, edx, ebx, esp, ebp, esi, edi]
+ *
+ */
+.macro op_safe_regs op:req
+ENTRY(native_\op\()_safe_regs)
+	push    %rbx
+	push    %rbp
+	push    $0              /* Return value */
+	push    %rdi
+	movl    (%rdi), %eax
+	movl    4(%rdi), %ecx
+	movl    8(%rdi), %edx
+	movl    12(%rdi), %ebx
+	movl    20(%rdi), %ebp
+	movl    24(%rdi), %esi
+	movl    28(%rdi), %edi
+1:	\op
+2:	movl    %edi, %r10d
+	pop     %rdi
+	movl    %eax, (%rdi)
+	movl    %ecx, 4(%rdi)
+	movl    %edx, 8(%rdi)
+	movl    %ebx, 12(%rdi)
+	movl    %ebp, 20(%rdi)
+	movl    %esi, 24(%rdi)
+	movl    %r10d, 28(%rdi)
+	pop     %rax
+	pop     %rbp
+	pop     %rbx
+	ret
+3:
+	movq    $-EIO, 8(%rsp)
+	jmp     2b
+	.section __ex_table,"ax"
+	.balign 4
+	.quad   1b, 3b
+	.previous
+ENDPROC(native_\op\()_safe_regs)
+.endm
+
+#else /* X86_32 */
+
+.macro op_safe_regs op:req
+ENTRY(native_\op\()_safe_regs)
+	push    %ebx
+	push    %ebp
+	push    %esi
+	push    %edi
+	push    $0              /* Return value */
+	push    %eax
+	movl    4(%eax), %ecx
+	movl    8(%eax), %edx
+	movl    12(%eax), %ebx
+	movl    20(%eax), %ebp
+	movl    24(%eax), %esi
+	movl    28(%eax), %edi
+	movl    (%eax), %eax
+1:	\op
+2:	push    %eax
+	movl    4(%esp), %eax
+	pop     (%eax)
+	addl    $4, %esp
+	movl    %ecx, 4(%eax)
+	movl    %edx, 8(%eax)
+	movl    %ebx, 12(%eax)
+	movl    %ebp, 20(%eax)
+	movl    %esi, 24(%eax)
+	movl    %edi, 28(%eax)
+	pop     %eax
+	pop     %edi
+	pop     %esi
+	pop     %ebp
+	pop     %ebx
+	ret
+3:
+	movl    $-EIO, 4(%esp)
+	jmp     2b
+	.section __ex_table,"ax"
+	.balign 4
+	.long   1b, 3b
+	.previous
+ENDPROC(native_\op\()_safe_regs)
+.endm
+
+#endif
+
+op_safe_regs rdmsr
+op_safe_regs wrmsr
+
-- 
cgit v1.2.3


From 177fed1ee8d727c39601ce9fc2299b4cb25a718e Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Mon, 31 Aug 2009 09:50:10 +0200
Subject: x86, msr: Rewrite AMD rd/wrmsr variants

Switch them to native_{rd,wr}msr_safe_regs and remove
pv_cpu_ops.read_msr_amd.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-2-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/msr.h      | 38 +++++++++++++++++++++-----------------
 arch/x86/include/asm/paravirt.h | 26 ++++++++++++++++++++------
 arch/x86/kernel/paravirt.c      |  1 -
 3 files changed, 41 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 184d4a11396..09c5ca70d49 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -71,22 +71,6 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 	return EAX_EDX_VAL(val, low, high);
 }
 
-static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
-						      int *err)
-{
-	DECLARE_ARGS(val, low, high);
-
-	asm volatile("2: rdmsr ; xor %0,%0\n"
-		     "1:\n\t"
-		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %3,%0 ; jmp 1b\n\t"
-		     ".previous\n\t"
-		     _ASM_EXTABLE(2b, 3b)
-		     : "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
-	return EAX_EDX_VAL(val, low, high);
-}
-
 static inline void native_write_msr(unsigned int msr,
 				    unsigned low, unsigned high)
 {
@@ -184,14 +168,34 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 	*p = native_read_msr_safe(msr, &err);
 	return err;
 }
+
 static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
 {
+	u32 gprs[8] = { 0 };
 	int err;
 
-	*p = native_read_msr_amd_safe(msr, &err);
+	gprs[1] = msr;
+	gprs[7] = 0x9c5a203a;
+
+	err = native_rdmsr_safe_regs(gprs);
+
+	*p = gprs[0] | ((u64)gprs[2] << 32);
+
 	return err;
 }
 
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+	u32 gprs[8] = { 0 };
+
+	gprs[0] = (u32)val;
+	gprs[1] = msr;
+	gprs[2] = val >> 32;
+	gprs[7] = 0x9c5a203a;
+
+	return native_wrmsr_safe_regs(gprs);
+}
+
 static inline int rdmsr_safe_regs(u32 *regs)
 {
 	return native_rdmsr_safe_regs(regs);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 1705944e037..11574934a99 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -166,7 +166,6 @@ struct pv_cpu_ops {
 
 	/* MSR, PMC and TSR operations.
 	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
-	u64 (*read_msr_amd)(unsigned int msr, int *err);
 	u64 (*read_msr)(unsigned int msr, int *err);
 	int (*rdmsr_regs)(u32 *regs);
 	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
@@ -828,10 +827,6 @@ static inline int paravirt_rdmsr_regs(u32 *regs)
 	return PVOP_CALL1(int, pv_cpu_ops.rdmsr_regs, regs);
 }
 
-static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
-{
-	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
-}
 static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
 {
 	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
@@ -887,12 +882,31 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 }
 static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
 {
+	u32 gprs[8] = { 0 };
 	int err;
 
-	*p = paravirt_read_msr_amd(msr, &err);
+	gprs[1] = msr;
+	gprs[7] = 0x9c5a203a;
+
+	err = paravirt_rdmsr_regs(gprs);
+
+	*p = gprs[0] | ((u64)gprs[2] << 32);
+
 	return err;
 }
 
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+	u32 gprs[8] = { 0 };
+
+	gprs[0] = (u32)val;
+	gprs[1] = msr;
+	gprs[2] = val >> 32;
+	gprs[7] = 0x9c5a203a;
+
+	return paravirt_wrmsr_regs(gprs);
+}
+
 static inline u64 paravirt_read_tsc(void)
 {
 	return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 67594af43b3..f5b0b4a01fb 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -363,7 +363,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 	.wbinvd = native_wbinvd,
 	.read_msr = native_read_msr_safe,
 	.rdmsr_regs = native_rdmsr_safe_regs,
-	.read_msr_amd = native_read_msr_amd_safe,
 	.write_msr = native_write_msr_safe,
 	.wrmsr_regs = native_wrmsr_safe_regs,
 	.read_tsc = native_read_tsc,
-- 
cgit v1.2.3


From 6b0f43ddfa358dc71ad2a2d57bce5906c1c5dc1a Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Mon, 31 Aug 2009 09:50:11 +0200
Subject: x86, AMD: Disable wrongly set X86_FEATURE_LAHF_LM CPUID bit

fbd8b1819e80ac5a176d085fdddc3a34d1499318 turns off the bit for
/proc/cpuinfo. However, a proper/full fix would be to additionally
turn off the bit in the CPUID output so that future callers get
correct CPU features info.

Do that by basically reversing what the BIOS wrongfully does at boot.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1251705011-18636-3-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/amd.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 63fddcd082c..0a717fc6aeb 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -404,9 +404,18 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		/*
 		 * Some BIOSes incorrectly force this feature, but only K8
 		 * revision D (model = 0x14) and later actually support it.
+		 * (AMD Erratum #110, docId: 25759).
 		 */
-		if (c->x86_model < 0x14)
+		if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
+			u64 val;
+
 			clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
+			if (!rdmsrl_amd_safe(0xc001100d, &val)) {
+				val &= ~(1ULL << 32);
+				wrmsrl_amd_safe(0xc001100d, val);
+			}
+		}
+
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-- 
cgit v1.2.3


From fe9b4e4e40ffdabbd385cdf171cb861c2fd517c0 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 11:53:23 -0700
Subject: x86, asm: Add 32-bit versions of the combined CFI macros

Add 32-bit versions of the combined CFI macros, equivalent to the
64-bit ones except, obviously, operating on 32-bit stack words.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/dwarf2.h | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index 3afc5e87cfd..ae6253ab902 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -87,9 +87,25 @@
 	CFI_RESTORE \reg
 	.endm
 #else /*!CONFIG_X86_64*/
+	.macro pushl_cfi reg
+	pushl \reg
+	CFI_ADJUST_CFA_OFFSET 4
+	.endm
 
-	/* 32bit defenitions are missed yet */
+	.macro popl_cfi reg
+	popl \reg
+	CFI_ADJUST_CFA_OFFSET -4
+	.endm
 
+	.macro movl_cfi reg offset=0
+	movl %\reg, \offset(%esp)
+	CFI_REL_OFFSET \reg, \offset
+	.endm
+
+	.macro movl_cfi_restore offset reg
+	movl \offset(%esp), %\reg
+	CFI_RESTORE \reg
+	.endm
 #endif /*!CONFIG_X86_64*/
 #endif /*__ASSEMBLY__*/
 
-- 
cgit v1.2.3


From 709972b1f6f70535d1fddbe1243a51b90c408a1c Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 11:57:20 -0700
Subject: x86, asm: Make _ASM_EXTABLE() usable from assembly code

We have had this convenient macro _ASM_EXTABLE() to generate exception
table entry in inline assembly.  Make it also usable for pure
assembly.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/asm.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
index 56be78f582f..b3ed1e1460f 100644
--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -3,7 +3,7 @@
 
 #ifdef __ASSEMBLY__
 # define __ASM_FORM(x)	x
-# define __ASM_EX_SEC	.section __ex_table
+# define __ASM_EX_SEC	.section __ex_table, "a"
 #else
 # define __ASM_FORM(x)	" " #x " "
 # define __ASM_EX_SEC	" .section __ex_table,\"a\"\n"
@@ -38,10 +38,18 @@
 #define _ASM_DI		__ASM_REG(di)
 
 /* Exception table entry */
+#ifdef __ASSEMBLY__
+# define _ASM_EXTABLE(from,to)	    \
+	__ASM_EX_SEC ;		    \
+	_ASM_ALIGN ;		    \
+	_ASM_PTR from , to ;	    \
+	.previous
+#else
 # define _ASM_EXTABLE(from,to) \
 	__ASM_EX_SEC	\
 	_ASM_ALIGN "\n" \
 	_ASM_PTR #from "," #to "\n" \
 	" .previous\n"
+#endif
 
 #endif /* _ASM_X86_ASM_H */
-- 
cgit v1.2.3


From 79c5dca3619d6ae15815eec14cd7a43db5f38b47 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 13:59:53 -0700
Subject: x86, msr: CFI annotations, cleanups for msr-reg.S

Add CFI annotations for native_{rd,wr}msr_safe_regs().
Simplify the 64-bit implementation: we don't allow the upper half
registers to be set, and so we can use them to carry state across the
operation.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-1-git-send-email-petkovbb@gmail.com>
---
 arch/x86/lib/msr-reg.S | 80 ++++++++++++++++++++++++++------------------------
 1 file changed, 42 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index 51f1bb3f8c7..9e8cdcf5d73 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -1,5 +1,6 @@
 #include <linux/linkage.h>
 #include <linux/errno.h>
+#include <asm/dwarf2.h>
 #include <asm/asm.h>
 #include <asm/msr.h>
 
@@ -12,10 +13,11 @@
  */
 .macro op_safe_regs op:req
 ENTRY(native_\op\()_safe_regs)
-	push    %rbx
-	push    %rbp
-	push    $0              /* Return value */
-	push    %rdi
+	CFI_STARTPROC
+	pushq_cfi %rbx
+	pushq_cfi %rbp
+	movq	%rdi, %r10	/* Save pointer */
+	xorl	%r11d, %r11d	/* Return value */
 	movl    (%rdi), %eax
 	movl    4(%rdi), %ecx
 	movl    8(%rdi), %edx
@@ -23,27 +25,26 @@ ENTRY(native_\op\()_safe_regs)
 	movl    20(%rdi), %ebp
 	movl    24(%rdi), %esi
 	movl    28(%rdi), %edi
+	CFI_REMEMBER_STATE
 1:	\op
-2:	movl    %edi, %r10d
-	pop     %rdi
-	movl    %eax, (%rdi)
-	movl    %ecx, 4(%rdi)
-	movl    %edx, 8(%rdi)
-	movl    %ebx, 12(%rdi)
-	movl    %ebp, 20(%rdi)
-	movl    %esi, 24(%rdi)
-	movl    %r10d, 28(%rdi)
-	pop     %rax
-	pop     %rbp
-	pop     %rbx
+2:	movl    %eax, (%r10)
+	movl	%r11d, %eax	/* Return value */
+	movl    %ecx, 4(%r10)
+	movl    %edx, 8(%r10)
+	movl    %ebx, 12(%r10)
+	movl    %ebp, 20(%r10)
+	movl    %esi, 24(%r10)
+	movl    %edi, 28(%r10)
+	popq_cfi %rbp
+	popq_cfi %rbx
 	ret
 3:
-	movq    $-EIO, 8(%rsp)
+	CFI_RESTORE_STATE
+	movl    $-EIO, %r11d
 	jmp     2b
-	.section __ex_table,"ax"
-	.balign 4
-	.quad   1b, 3b
-	.previous
+
+	_ASM_EXTABLE(1b, 3b)
+	CFI_ENDPROC
 ENDPROC(native_\op\()_safe_regs)
 .endm
 
@@ -51,12 +52,13 @@ ENDPROC(native_\op\()_safe_regs)
 
 .macro op_safe_regs op:req
 ENTRY(native_\op\()_safe_regs)
-	push    %ebx
-	push    %ebp
-	push    %esi
-	push    %edi
-	push    $0              /* Return value */
-	push    %eax
+	CFI_STARTPROC
+	pushl_cfi %ebx
+	pushl_cfi %ebp
+	pushl_cfi %esi
+	pushl_cfi %edi
+	pushl_cfi $0              /* Return value */
+	pushl_cfi %eax
 	movl    4(%eax), %ecx
 	movl    8(%eax), %edx
 	movl    12(%eax), %ebx
@@ -64,30 +66,32 @@ ENTRY(native_\op\()_safe_regs)
 	movl    24(%eax), %esi
 	movl    28(%eax), %edi
 	movl    (%eax), %eax
+	CFI_REMEMBER_STATE
 1:	\op
-2:	push    %eax
+2:	pushl_cfi %eax
 	movl    4(%esp), %eax
-	pop     (%eax)
+	popl_cfi (%eax)
 	addl    $4, %esp
+	CFI_ADJUST_CFA_OFFSET -4
 	movl    %ecx, 4(%eax)
 	movl    %edx, 8(%eax)
 	movl    %ebx, 12(%eax)
 	movl    %ebp, 20(%eax)
 	movl    %esi, 24(%eax)
 	movl    %edi, 28(%eax)
-	pop     %eax
-	pop     %edi
-	pop     %esi
-	pop     %ebp
-	pop     %ebx
+	popl_cfi %eax
+	popl_cfi %edi
+	popl_cfi %esi
+	popl_cfi %ebp
+	popl_cfi %ebx
 	ret
 3:
+	CFI_RESTORE_STATE
 	movl    $-EIO, 4(%esp)
 	jmp     2b
-	.section __ex_table,"ax"
-	.balign 4
-	.long   1b, 3b
-	.previous
+
+	_ASM_EXTABLE(1b, 3b)
+	CFI_ENDPROC
 ENDPROC(native_\op\()_safe_regs)
 .endm
 
-- 
cgit v1.2.3


From 0cc0213e73af5963eca259c84876937c20689dbd Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 14:23:29 -0700
Subject: x86, msr: Have the _safe MSR functions return -EIO, not -EFAULT

For some reason, the _safe MSR functions returned -EFAULT, not -EIO.
However, the only user which cares about the return code as anything
other than a boolean is the MSR driver, which wants -EIO.  Change it
to -EIO across the board.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/include/asm/msr.h |  4 ++--
 arch/x86/kernel/msr.c      | 10 ++--------
 arch/x86/xen/enlighten.c   |  2 +-
 3 files changed, 5 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 09c5ca70d49..943fdd572e1 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -67,7 +67,7 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
 		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), [fault] "i" (-EFAULT));
+		     : "c" (msr), [fault] "i" (-EIO));
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -90,7 +90,7 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 		     _ASM_EXTABLE(2b, 3b)
 		     : [err] "=a" (err)
 		     : "c" (msr), "0" (low), "d" (high),
-		       [fault] "i" (-EFAULT)
+		       [fault] "i" (-EIO)
 		     : "memory");
 	return err;
 }
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 98fd6cd4e3a..2cfbb4b2c42 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -80,11 +80,8 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 
 	for (; count; count -= 8) {
 		err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
-		if (err) {
-			if (err == -EFAULT) /* Fix idiotic error code */
-				err = -EIO;
+		if (err)
 			break;
-		}
 		if (copy_to_user(tmp, &data, 8)) {
 			err = -EFAULT;
 			break;
@@ -115,11 +112,8 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 			break;
 		}
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
-		if (err) {
-			if (err == -EFAULT) /* Fix idiotic error code */
-				err = -EIO;
+		if (err)
 			break;
-		}
 		tmp += 2;
 		bytes += 8;
 	}
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0a1700a2be9..a8432d81690 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -713,7 +713,7 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 	set:
 		base = ((u64)high << 32) | low;
 		if (HYPERVISOR_set_segment_base(which, base) != 0)
-			ret = -EFAULT;
+			ret = -EIO;
 		break;
 #endif
 
-- 
cgit v1.2.3


From 8b956bf1f0f2b552ed93cf6cafe823edff298b3b Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 14:13:48 -0700
Subject: x86, msr: Create _on_cpu helpers for {rw,wr}msr_safe_regs()

Create _on_cpu helpers for {rw,wr}msr_safe_regs() analogously with the
other MSR functions.  This will be necessary to add support for these
to the MSR driver.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@gmail.com>
---
 arch/x86/include/asm/msr.h | 18 +++++++++++++----
 arch/x86/lib/msr.c         | 49 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 943fdd572e1..8e56712aa17 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -97,8 +97,8 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 
 extern unsigned long long native_read_tsc(void);
 
-extern int native_rdmsr_safe_regs(u32 *regs);
-extern int native_wrmsr_safe_regs(u32 *regs);
+extern int native_rdmsr_safe_regs(u32 regs[8]);
+extern int native_wrmsr_safe_regs(u32 regs[8]);
 
 static __always_inline unsigned long long __native_read_tsc(void)
 {
@@ -196,12 +196,12 @@ static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
 	return native_wrmsr_safe_regs(gprs);
 }
 
-static inline int rdmsr_safe_regs(u32 *regs)
+static inline int rdmsr_safe_regs(u32 regs[8])
 {
 	return native_rdmsr_safe_regs(regs);
 }
 
-static inline int wrmsr_safe_regs(u32 *regs)
+static inline int wrmsr_safe_regs(u32 regs[8])
 {
 	return native_wrmsr_safe_regs(regs);
 }
@@ -245,6 +245,8 @@ void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
 void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
 #else  /*  CONFIG_SMP  */
 static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
@@ -275,6 +277,14 @@ static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	return wrmsr_safe(msr_no, l, h);
 }
+static inline int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
+{
+	return rdmsr_safe_regs(regs);
+}
+static inline int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
+{
+	return wrmsr_safe_regs(regs);
+}
 #endif  /* CONFIG_SMP */
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index caa24aca811..33a1e3ca22d 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -175,3 +175,52 @@ int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 	return err ? err : rv.err;
 }
 EXPORT_SYMBOL(wrmsr_safe_on_cpu);
+
+/*
+ * These variants are significantly slower, but allows control over
+ * the entire 32-bit GPR set.
+ */
+struct msr_regs_info {
+	u32 *regs;
+	int err;
+};
+
+static void __rdmsr_safe_regs_on_cpu(void *info)
+{
+	struct msr_regs_info *rv = info;
+
+	rv->err = rdmsr_safe_regs(rv->regs);
+}
+
+static void __wrmsr_safe_regs_on_cpu(void *info)
+{
+	struct msr_regs_info *rv = info;
+
+	rv->err = wrmsr_safe_regs(rv->regs);
+}
+
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+{
+	int err;
+	struct msr_regs_info rv;
+
+	rv.regs   = regs;
+	rv.err    = -EIO;
+	err = smp_call_function_single(cpu, __rdmsr_safe_regs_on_cpu, &rv, 1);
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(rdmsr_safe_regs_on_cpu);
+
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+{
+	int err;
+	struct msr_regs_info rv;
+
+	rv.regs = regs;
+	rv.err  = -EIO;
+	err = smp_call_function_single(cpu, __wrmsr_safe_regs_on_cpu, &rv, 1);
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(wrmsr_safe_regs_on_cpu);
-- 
cgit v1.2.3


From ff55df53dfdd338906c8ba9d1f4a759b86b869d5 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 14:16:57 -0700
Subject: x86, msr: Export the register-setting MSR functions via /dev/*/msr

Make it possible to access the all-register-setting/getting MSR
functions via the MSR driver.  This is implemented as an ioctl() on
the standard MSR device node.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@gmail.com>
---
 arch/x86/include/asm/msr.h | 10 +++++++--
 arch/x86/kernel/msr.c      | 51 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 8e56712aa17..7e2b6ba962f 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -3,10 +3,16 @@
 
 #include <asm/msr-index.h>
 
-#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define X86_IOC_RDMSR_REGS	_IOWR('c', 0xA0, __u32[8])
+#define X86_IOC_WRMSR_REGS	_IOWR('c', 0xA1, __u32[8])
+
+#ifdef __KERNEL__
+
 #include <asm/asm.h>
 #include <asm/errno.h>
 #include <asm/cpumask.h>
@@ -286,6 +292,6 @@ static inline int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
 	return wrmsr_safe_regs(regs);
 }
 #endif  /* CONFIG_SMP */
-#endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
 #endif /* _ASM_X86_MSR_H */
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 2cfbb4b2c42..7dd95009417 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -1,6 +1,7 @@
 /* ----------------------------------------------------------------------- *
  *
  *   Copyright 2000-2008 H. Peter Anvin - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author: H. Peter Anvin
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -121,6 +122,54 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	return bytes ? bytes : err;
 }
 
+static long msr_ioctl(struct file *file, unsigned int ioc, unsigned long arg)
+{
+	u32 __user *uregs = (u32 __user *)arg;
+	u32 regs[8];
+	int cpu = iminor(file->f_path.dentry->d_inode);
+	int err;
+
+	switch (ioc) {
+	case X86_IOC_RDMSR_REGS:
+		if (!(file->f_mode & FMODE_READ)) {
+			err = -EBADF;
+			break;
+		}
+		if (copy_from_user(&regs, uregs, sizeof regs)) {
+			err = -EFAULT;
+			break;
+		}
+		err = rdmsr_safe_regs_on_cpu(cpu, regs);
+		if (err)
+			break;
+		if (copy_to_user(uregs, &regs, sizeof regs))
+			err = -EFAULT;
+		break;
+
+	case X86_IOC_WRMSR_REGS:
+		if (!(file->f_mode & FMODE_WRITE)) {
+			err = -EBADF;
+			break;
+		}
+		if (copy_from_user(&regs, uregs, sizeof regs)) {
+			err = -EFAULT;
+			break;
+		}
+		err = wrmsr_safe_regs_on_cpu(cpu, regs);
+		if (err)
+			break;
+		if (copy_to_user(uregs, &regs, sizeof regs))
+			err = -EFAULT;
+		break;
+
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+	return err;
+}
+
 static int msr_open(struct inode *inode, struct file *file)
 {
 	unsigned int cpu = iminor(file->f_path.dentry->d_inode);
@@ -151,6 +200,8 @@ static const struct file_operations msr_fops = {
 	.read = msr_read,
 	.write = msr_write,
 	.open = msr_open,
+	.unlocked_ioctl = msr_ioctl,
+	.compat_ioctl = msr_ioctl,
 };
 
 static int __cpuinit msr_device_create(int cpu)
-- 
cgit v1.2.3


From ce3f7cb96e67d6518c7fc7b361a76409c3817d64 Mon Sep 17 00:00:00 2001
From: Matt Fleming <matt@console-pimps.org>
Date: Tue, 1 Sep 2009 13:32:48 +0900
Subject: sh: Fix dcache flushing for N-way write-through caches.

This adopts the special-cased 2-way write-through dcache flusher for
N-ways and moves it in to the generic path. Assignment is done at runtime
via the check for the CCR_CACHE_WT bit in the same path as the per-way
writeback flushers.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 48 +++++++++++++++++++++++++++---------------------
 1 file changed, 27 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 397c1030c7a..b36a9c986a5 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -25,13 +25,14 @@
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
 #define MAX_ICACHE_PAGES	32
 
+static void __flush_dcache_segment_writethrough(unsigned long start,
+						unsigned long extent);
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent);
 static void __flush_dcache_segment_2way(unsigned long start,
 					unsigned long extent);
 static void __flush_dcache_segment_4way(unsigned long start,
 					unsigned long extent);
-
 static void __flush_cache_4096(unsigned long addr, unsigned long phys,
 			       unsigned long exec_offset);
 
@@ -95,10 +96,17 @@ static void __init emit_cache_params(void)
  */
 void __init p3_cache_init(void)
 {
+	unsigned int wt_enabled = !!(__raw_readl(CCR) & CCR_CACHE_WT);
+
 	compute_alias(&boot_cpu_data.icache);
 	compute_alias(&boot_cpu_data.dcache);
 	compute_alias(&boot_cpu_data.scache);
 
+	if (wt_enabled) {
+		__flush_dcache_segment_fn = __flush_dcache_segment_writethrough;
+		goto out;
+	}
+
 	switch (boot_cpu_data.dcache.ways) {
 	case 1:
 		__flush_dcache_segment_fn = __flush_dcache_segment_1way;
@@ -114,6 +122,7 @@ void __init p3_cache_init(void)
 		break;
 	}
 
+out:
 	emit_cache_params();
 }
 
@@ -607,6 +616,23 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys,
  * - If caches are disabled or configured in write-through mode, then
  *   the movca.l writes garbage directly into memory.
  */
+static void __flush_dcache_segment_writethrough(unsigned long start,
+					        unsigned long extent_per_way)
+{
+	unsigned long addr;
+	int i;
+
+	addr = CACHE_OC_ADDRESS_ARRAY | (start & cpu_data->dcache.entry_mask);
+
+	while (extent_per_way) {
+		for (i = 0; i < cpu_data->dcache.ways; i++)
+			__raw_writel(0, addr + cpu_data->dcache.way_incr * i);
+
+		addr += cpu_data->dcache.linesz;
+		extent_per_way -= cpu_data->dcache.linesz;
+	}
+}
+
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent_per_way)
 {
@@ -655,25 +681,6 @@ static void __flush_dcache_segment_1way(unsigned long start,
 	} while (a0 < a0e);
 }
 
-#ifdef CONFIG_CACHE_WRITETHROUGH
-/* This method of cache flushing avoids the problems discussed
- * in the comment above if writethrough caches are enabled. */
-static void __flush_dcache_segment_2way(unsigned long start,
-					unsigned long extent_per_way)
-{
-	unsigned long array_addr;
-
-	array_addr = CACHE_OC_ADDRESS_ARRAY |
-		(start & cpu_data->dcache.entry_mask);
-
-	while (extent_per_way) {
-		ctrl_outl(0, array_addr);
-		ctrl_outl(0, array_addr + cpu_data->dcache.way_incr);
-		array_addr += cpu_data->dcache.linesz;
-		extent_per_way -= cpu_data->dcache.linesz;
-	}
-}
-#else
 static void __flush_dcache_segment_2way(unsigned long start,
 					unsigned long extent_per_way)
 {
@@ -732,7 +739,6 @@ static void __flush_dcache_segment_2way(unsigned long start,
 		a1 += linesz;
 	} while (a0 < a0e);
 }
-#endif
 
 static void __flush_dcache_segment_4way(unsigned long start,
 					unsigned long extent_per_way)
-- 
cgit v1.2.3


From 96910b6dc8a4fdb75e69f09f47b62d41743d36ba Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:34 +0200
Subject: locking, m68k/asm-offsets: Rename signal defines

In order to be able to use asm-offsets.h in C files the
existing namespace conflicts must be solved first. In
asm-offsets.h there are defines for signal constants, so they
can be used in assembler files.

Unfortunately the existing defines use a 1:1 mapping for the
macro names which results in name space conflicts if the header
file would also be used in C files. So rename the created
defines and add an "L" prefix to each one since that has
already been done for the SIGTRAP define in entry_mm.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124416.998821502@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/m68k/include/asm/entry_mm.h | 1 -
 arch/m68k/kernel/asm-offsets.c   | 8 ++++----
 arch/m68k/math-emu/fp_entry.S    | 8 ++++----
 3 files changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h
index 4fcfc28c061..47412588621 100644
--- a/arch/m68k/include/asm/entry_mm.h
+++ b/arch/m68k/include/asm/entry_mm.h
@@ -46,7 +46,6 @@
 #define curptr a2
 
 LFLUSH_I_AND_D = 0x00000808
-LSIGTRAP = 5
 
 /* process bits for task_struct.ptrace */
 PT_TRACESYS_OFF = 3
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 25d6b721522..73e5e581245 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -89,10 +89,10 @@ int main(void)
 	DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref));
 
 	/* signal defines */
-	DEFINE(SIGSEGV, SIGSEGV);
-	DEFINE(SEGV_MAPERR, SEGV_MAPERR);
-	DEFINE(SIGTRAP, SIGTRAP);
-	DEFINE(TRAP_TRACE, TRAP_TRACE);
+	DEFINE(LSIGSEGV, SIGSEGV);
+	DEFINE(LSEGV_MAPERR, SEGV_MAPERR);
+	DEFINE(LSIGTRAP, SIGTRAP);
+	DEFINE(LTRAP_TRACE, TRAP_TRACE);
 
 	/* offsets into the custom struct */
 	DEFINE(CUSTOMBASE, &amiga_custom);
diff --git a/arch/m68k/math-emu/fp_entry.S b/arch/m68k/math-emu/fp_entry.S
index 916c6f3d1f0..a3fe1f348df 100644
--- a/arch/m68k/math-emu/fp_entry.S
+++ b/arch/m68k/math-emu/fp_entry.S
@@ -85,8 +85,8 @@ fp_err_ua2:
 fp_err_ua1:
 	addq.l	#4,%sp
 	move.l	%a0,-(%sp)
-	pea	SEGV_MAPERR
-	pea	SIGSEGV
+	pea	LSEGV_MAPERR
+	pea	LSIGSEGV
 	jsr	fpemu_signal
 	add.w	#12,%sp
 	jra	ret_from_exception
@@ -96,8 +96,8 @@ fp_err_ua1:
 	| it does not really belong here, but...
 fp_sendtrace060:
 	move.l	(FPS_PC,%sp),-(%sp)
-	pea	TRAP_TRACE
-	pea	SIGTRAP
+	pea	LTRAP_TRACE
+	pea	LSIGTRAP
 	jsr	fpemu_signal
 	add.w	#12,%sp
 	jra	ret_from_exception
-- 
cgit v1.2.3


From 1e1030dccb1084c8a38976d3656aab1d50d762da Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 1 Sep 2009 17:38:32 +0900
Subject: sh: nmi_debug support.

This implements support for NMI debugging that was shamelessly copied
from the avr32 port. A bit of special magic is needed in the interrupt
exception path given that the NMI exception handler is stubbed in to the
regular exception handling table despite being reported in INTEVT. So we
mangle the lookup and kick off an EXPEVT-style exception dispatch from
the INTEVT path for exceptions that do_IRQ() has no chance of handling.
As a result, we also drop the evt2irq() conversion from the do_IRQ() path
and just do it in assembly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/kdebug.h   |  1 +
 arch/sh/include/asm/system.h   |  2 +-
 arch/sh/kernel/Makefile        |  7 ++--
 arch/sh/kernel/cpu/sh3/entry.S | 26 ++++++++++++++
 arch/sh/kernel/cpu/sh3/ex.S    |  4 +--
 arch/sh/kernel/irq.c           |  2 +-
 arch/sh/kernel/nmi_debug.c     | 77 ++++++++++++++++++++++++++++++++++++++++++
 arch/sh/kernel/traps.c         | 21 ++++++++++++
 8 files changed, 132 insertions(+), 8 deletions(-)
 create mode 100644 arch/sh/kernel/nmi_debug.c

(limited to 'arch')

diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
index 0b9f896f203..985219f9759 100644
--- a/arch/sh/include/asm/kdebug.h
+++ b/arch/sh/include/asm/kdebug.h
@@ -4,6 +4,7 @@
 /* Grossly misnamed. */
 enum die_val {
 	DIE_TRAP,
+	DIE_NMI,
 	DIE_OOPS,
 };
 
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index 6b272238a46..b5c5acdc8c0 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -169,7 +169,7 @@ BUILD_TRAP_HANDLER(breakpoint);
 BUILD_TRAP_HANDLER(singlestep);
 BUILD_TRAP_HANDLER(fpu_error);
 BUILD_TRAP_HANDLER(fpu_state_restore);
-BUILD_TRAP_HANDLER(unwinder);
+BUILD_TRAP_HANDLER(nmi);
 
 #ifdef CONFIG_BUG
 extern void handle_BUG(struct pt_regs *);
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index f37cf02ad9b..a2d0a40f384 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -10,9 +10,10 @@ CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
 obj-y	:= debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o	\
-	   machvec.o process_$(BITS).o ptrace_$(BITS).o setup.o 	\
-	   signal_$(BITS).o sys_sh.o sys_sh$(BITS).o syscalls_$(BITS).o	\
-	   time.o topology.o traps.o traps_$(BITS).o unwinder.o
+	   machvec.o nmi_debug.o process_$(BITS).o ptrace_$(BITS).o	\
+	   setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o		\
+	   syscalls_$(BITS).o time.o topology.o traps.o			\
+	   traps_$(BITS).o unwinder.o
 
 obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index aebd33d18ff..d1142d36592 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -532,7 +532,33 @@ ENTRY(handle_interrupt)
 	mov.l	2f, r4
 	mov.l	3f, r9
 	mov.l	@r4, r4		! pass INTEVT vector as arg0
+
+	shlr2	r4
+	shlr	r4
+	mov	r4, r0		! save vector->jmp table offset for later
+
+	shlr2	r4		! vector to IRQ# conversion
+	add	#-0x10, r4
+
+	cmp/pz	r4		! is it a valid IRQ?
+	bt	10f
+
+	/*
+	 * We got here as a result of taking the INTEVT path for something
+	 * that isn't a valid hard IRQ, therefore we bypass the do_IRQ()
+	 * path and special case the event dispatch instead.  This is the
+	 * expected path for the NMI (and any other brilliantly implemented
+	 * exception), which effectively wants regular exception dispatch
+	 * but is unfortunately reported through INTEVT rather than
+	 * EXPEVT.  Grr.
+	 */
+	mov.l	6f, r9
+	mov.l	@(r0, r9), r9
 	jmp	@r9
+	 mov	r15, r8		! trap handlers take saved regs in r8
+
+10:
+	jmp	@r9		! Off to do_IRQ() we go.
 	 mov	r15, r5		! pass saved registers as arg1
 
 ENTRY(exception_none)
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index e5a0de39a2d..46610c35c23 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -48,9 +48,7 @@ ENTRY(exception_handling_table)
 	.long	system_call	! Unconditional Trap	 /* 160 */
 	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
-ENTRY(nmi_slot)
-	.long	kgdb_handle_exception	/* 1C0 */	! Allow trap to debugger
-ENTRY(user_break_point_trap)
+	.long	nmi_trap_handler	/* 1C0 */	! Allow trap to debugger
 	.long	break_point_trap	/* 1E0 */
 
 	/*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index d1053392e28..60f8af4497c 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -114,7 +114,7 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 #endif
 
 	irq_enter();
-	irq = irq_demux(evt2irq(irq));
+	irq = irq_demux(irq);
 
 #ifdef CONFIG_IRQSTACKS
 	curctx = (union irq_ctx *)current_thread_info();
diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c
new file mode 100644
index 00000000000..ff0abbd1e65
--- /dev/null
+++ b/arch/sh/kernel/nmi_debug.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h>
+
+enum nmi_action {
+	NMI_SHOW_STATE	= 1 << 0,
+	NMI_SHOW_REGS	= 1 << 1,
+	NMI_DIE		= 1 << 2,
+	NMI_DEBOUNCE	= 1 << 3,
+};
+
+static unsigned long nmi_actions;
+
+static int nmi_debug_notify(struct notifier_block *self,
+		unsigned long val, void *data)
+{
+	struct die_args *args = data;
+
+	if (likely(val != DIE_NMI))
+		return NOTIFY_DONE;
+
+	if (nmi_actions & NMI_SHOW_STATE)
+		show_state();
+	if (nmi_actions & NMI_SHOW_REGS)
+		show_regs(args->regs);
+	if (nmi_actions & NMI_DEBOUNCE)
+		mdelay(10);
+	if (nmi_actions & NMI_DIE)
+		return NOTIFY_BAD;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block nmi_debug_nb = {
+	.notifier_call = nmi_debug_notify,
+};
+
+static int __init nmi_debug_setup(char *str)
+{
+	char *p, *sep;
+
+	register_die_notifier(&nmi_debug_nb);
+
+	if (*str != '=')
+		return 0;
+
+	for (p = str + 1; *p; p = sep + 1) {
+		sep = strchr(p, ',');
+		if (sep)
+			*sep = 0;
+		if (strcmp(p, "state") == 0)
+			nmi_actions |= NMI_SHOW_STATE;
+		else if (strcmp(p, "regs") == 0)
+			nmi_actions |= NMI_SHOW_REGS;
+		else if (strcmp(p, "debounce") == 0)
+			nmi_actions |= NMI_DEBOUNCE;
+		else if (strcmp(p, "die") == 0)
+			nmi_actions |= NMI_DIE;
+		else
+			printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
+				p);
+		if (!sep)
+			break;
+	}
+
+	return 0;
+}
+__setup("nmi_debug", nmi_debug_setup);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index f69bd968fcc..a8396f36bd1 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -5,6 +5,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
+#include <linux/hardirq.h>
 #include <asm/unwinder.h>
 #include <asm/system.h>
 
@@ -91,3 +92,23 @@ BUILD_TRAP_HANDLER(bug)
 
 	force_sig(SIGTRAP, current);
 }
+
+BUILD_TRAP_HANDLER(nmi)
+{
+	TRAP_HANDLER_DECL;
+
+	nmi_enter();
+
+	switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
+	case NOTIFY_OK:
+	case NOTIFY_STOP:
+		break;
+	case NOTIFY_BAD:
+		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
+	default:
+		printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n");
+		break;
+	}
+
+	nmi_exit();
+}
-- 
cgit v1.2.3


From ade315d83c1d53b3c6b820134cb16601351810fe Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 1 Sep 2009 17:45:35 +0900
Subject: sh: Kill off kgdb's magical NMI debouncing.

The kgdb stub has traditionally tied in to the NMI slot, and manually
handled debounce. Now that we have a generic way to do this instead, all
of the stub-specific debounce silliness can be killed off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/kgdb.h     |  3 ---
 arch/sh/kernel/cpu/sh3/entry.S | 31 -------------------------------
 arch/sh/kernel/kgdb.c          |  2 --
 3 files changed, 36 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
index 72704ed725e..4235e228d92 100644
--- a/arch/sh/include/asm/kgdb.h
+++ b/arch/sh/include/asm/kgdb.h
@@ -30,9 +30,6 @@ static inline void arch_kgdb_breakpoint(void)
 	__asm__ __volatile__ ("trapa #0x3c\n");
 }
 
-/* State info */
-extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
-
 #define BUFMAX                 2048
 
 #define CACHE_FLUSH_IS_SAFE	1
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index d1142d36592..0151933e525 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -53,10 +53,6 @@
  *	syscall #
  *
  */
-#if defined(CONFIG_KGDB)
-NMI_VEC = 0x1c0			! Must catch early for debounce
-#endif
-
 /* Offsets to the stack */
 OFF_R0  =  0		/* Return value. New ABI also arg4 */
 OFF_R1  =  4     	/* New ABI: arg5 */
@@ -71,7 +67,6 @@ OFF_PC  =  (16*4)
 OFF_SR	=  (16*4+8)
 OFF_TRA	=  (16*4+6*4)
 
-
 #define k0	r0
 #define k1	r1
 #define k2	r2
@@ -281,21 +276,12 @@ restore_all:
 6:	or	k0, k2			! Set the IMASK-bits
 	ldc	k2, ssr
 	!
-#if defined(CONFIG_KGDB)
-	! Clear in_nmi
-	mov.l	6f, k0
-	mov	#0, k1
-	mov.b	k1, @k0
-#endif
 	mov	k4, r15
 	rte
 	 nop
 
 	.align	2
 5:	.long	0x00001000	! DSP
-#ifdef CONFIG_KGDB
-6:	.long	in_nmi
-#endif
 7:	.long	0x30000000
 
 ! common exception handler
@@ -487,23 +473,6 @@ ENTRY(save_low_regs)
 !
 	.balign 	512,0,512
 ENTRY(handle_interrupt)
-#if defined(CONFIG_KGDB)
-	mov.l	2f, k2
-	! Debounce (filter nested NMI)
-	mov.l	@k2, k0
-	mov.l	9f, k1
-	cmp/eq	k1, k0
-	bf	11f
-	mov.l	10f, k1
-	tas.b	@k1
-	bt	11f
-	rte
-	 nop
-	.align	2
-9:	.long	NMI_VEC
-10:	.long	in_nmi
-11:
-#endif /* defined(CONFIG_KGDB) */
 	sts	pr, k3		! save original pr value in k3
 	mova	exception_data, k0
 
diff --git a/arch/sh/kernel/kgdb.c b/arch/sh/kernel/kgdb.c
index d29de7864f3..3e532d0d4a5 100644
--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -15,8 +15,6 @@
 #include <linux/io.h>
 #include <asm/cacheflush.h>
 
-char in_nmi = 0;	/* Set during NMI to prevent re-entry */
-
 /* Macros for single step instruction identification */
 #define OPCODE_BT(op)		(((op) & 0xff00) == 0x8900)
 #define OPCODE_BF(op)		(((op) & 0xff00) == 0x8b00)
-- 
cgit v1.2.3


From acde31dc467797ccae3a55b791a77af446cce018 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 27 Aug 2009 14:29:20 +0100
Subject: kmemleak: Ignore the aperture memory hole on x86_64

This block is allocated with alloc_bootmem() and scanned by kmemleak but
the kernel direct mapping may no longer exist. This patch tells kmemleak
to ignore this memory hole. The dma32_bootmem_ptr in
dma32_reserve_bootmem() is also ignored.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/aperture_64.c | 6 ++++++
 arch/x86/kernel/pci-dma.c     | 6 ++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 676debfc170..128111d8ffe 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -20,6 +20,7 @@
 #include <linux/bitops.h>
 #include <linux/ioport.h>
 #include <linux/suspend.h>
+#include <linux/kmemleak.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 #include <asm/iommu.h>
@@ -94,6 +95,11 @@ static u32 __init allocate_aperture(void)
 	 * code for safe
 	 */
 	p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
+	/*
+	 * Kmemleak should not scan this block as it may not be mapped via the
+	 * kernel direct mapping.
+	 */
+	kmemleak_ignore(p);
 	if (!p || __pa(p)+aper_size > 0xffffffff) {
 		printk(KERN_ERR
 			"Cannot allocate aperture memory hole (%p,%uK)\n",
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..fa80f60e960 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -3,6 +3,7 @@
 #include <linux/dmar.h>
 #include <linux/bootmem.h>
 #include <linux/pci.h>
+#include <linux/kmemleak.h>
 
 #include <asm/proto.h>
 #include <asm/dma.h>
@@ -88,6 +89,11 @@ void __init dma32_reserve_bootmem(void)
 	size = roundup(dma32_bootmem_size, align);
 	dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
 				 512ULL<<20);
+	/*
+	 * Kmemleak should not scan this block as it may not be mapped via the
+	 * kernel direct mapping.
+	 */
+	kmemleak_ignore(dma32_bootmem_ptr);
 	if (dma32_bootmem_ptr)
 		dma32_bootmem_size = size;
 	else
-- 
cgit v1.2.3


From 983f4c514c4c9ddac1077a2c805fd16cbe3f7487 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 1 Sep 2009 21:12:55 +0900
Subject: Revert "sh: Kill off now redundant local irq disabling."

This reverts commit 64a6d72213dd810dd55bd0a503c36150af41c3c3.

Unfortunately we can't use on_each_cpu() for all of the cache ops, as
some of them only require preempt disabling. This seems to be the same
issue that impacts the mips r4k caches, where this code was based on.
This fixes up a deadlock that showed up in some IRQ context cases.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh2a.c   |  6 ++++-
 arch/sh/mm/cache-sh4.c    | 61 +++++++++++++++++++++++++++--------------------
 arch/sh/mm/cache-sh5.c    | 29 +++++++++++++++++-----
 arch/sh/mm/cache-sh7705.c |  8 +++++++
 4 files changed, 71 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
index d783361e3f0..975899d8356 100644
--- a/arch/sh/mm/cache-sh2a.c
+++ b/arch/sh/mm/cache-sh2a.c
@@ -102,10 +102,12 @@ static void sh2a_flush_icache_range(void *args)
 	struct flusher_data *data = args;
 	unsigned long start, end;
 	unsigned long v;
+	unsigned long flags;
 
 	start = data->addr1 & ~(L1_CACHE_BYTES-1);
 	end = (data->addr2 + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
 
+	local_irq_save(flags);
 	jump_to_uncached();
 
 	for (v = start; v < end; v+=L1_CACHE_BYTES) {
@@ -120,10 +122,12 @@ static void sh2a_flush_icache_range(void *args)
 			}
 		}
 		/* I-Cache invalidate */
-		ctrl_outl(addr, CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
+		ctrl_outl(addr,
+			  CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
 	}
 
 	back_to_cached();
+	local_irq_restore(flags);
 }
 
 void __init sh2a_cache_init(void)
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 70fb906419d..3ac4945cb49 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -48,44 +48,48 @@ static void sh4_flush_icache_range(void *args)
 	struct flusher_data *data = args;
 	int icacheaddr;
 	unsigned long start, end;
-	unsigned long v;
+	unsigned long flags, v;
 	int i;
 
 	start = data->addr1;
 	end = data->addr2;
 
-	/* If there are too many pages then just blow the caches */
-	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-		local_flush_cache_all(args);
-	} else {
-		/* selectively flush d-cache then invalidate the i-cache */
-		/* this is inefficient, so only use for small ranges */
-		start &= ~(L1_CACHE_BYTES-1);
-		end += L1_CACHE_BYTES-1;
-		end &= ~(L1_CACHE_BYTES-1);
-
-		jump_to_uncached();
-
-		for (v = start; v < end; v+=L1_CACHE_BYTES) {
-			__ocbwb(v);
-
-			icacheaddr = CACHE_IC_ADDRESS_ARRAY |
-				(v & cpu_data->icache.entry_mask);
-
-			for (i = 0; i < cpu_data->icache.ways;
-				i++, icacheaddr += cpu_data->icache.way_incr)
-				/* Clear i-cache line valid-bit */
-				ctrl_outl(0, icacheaddr);
-		}
+       /* If there are too many pages then just blow the caches */
+        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+                local_flush_cache_all(args);
+       } else {
+               /* selectively flush d-cache then invalidate the i-cache */
+               /* this is inefficient, so only use for small ranges */
+               start &= ~(L1_CACHE_BYTES-1);
+               end += L1_CACHE_BYTES-1;
+               end &= ~(L1_CACHE_BYTES-1);
+
+               local_irq_save(flags);
+               jump_to_uncached();
+
+               for (v = start; v < end; v+=L1_CACHE_BYTES) {
+                       asm volatile("ocbwb     %0"
+                                    : /* no output */
+                                    : "m" (__m(v)));
+
+                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
+                                       v & cpu_data->icache.entry_mask);
+
+                       for (i = 0; i < cpu_data->icache.ways;
+                               i++, icacheaddr += cpu_data->icache.way_incr)
+                                       /* Clear i-cache line valid-bit */
+                                       ctrl_outl(0, icacheaddr);
+               }
 
 		back_to_cached();
+		local_irq_restore(flags);
 	}
 }
 
 static inline void flush_cache_4096(unsigned long start,
 				    unsigned long phys)
 {
-	unsigned long exec_offset = 0;
+	unsigned long flags, exec_offset = 0;
 
 	/*
 	 * All types of SH-4 require PC to be in P2 to operate on the I-cache.
@@ -95,8 +99,10 @@ static inline void flush_cache_4096(unsigned long start,
 	    (start < CACHE_OC_ADDRESS_ARRAY))
 		exec_offset = 0x20000000;
 
+	local_irq_save(flags);
 	__flush_cache_4096(start | SH_CACHE_ASSOC,
 			   P1SEGADDR(phys), exec_offset);
+	local_irq_restore(flags);
 }
 
 /*
@@ -130,8 +136,9 @@ static void sh4_flush_dcache_page(void *arg)
 /* TODO: Selective icache invalidation through IC address array.. */
 static void __uses_jump_to_uncached flush_icache_all(void)
 {
-	unsigned long ccr;
+	unsigned long flags, ccr;
 
+	local_irq_save(flags);
 	jump_to_uncached();
 
 	/* Flush I-cache */
@@ -143,7 +150,9 @@ static void __uses_jump_to_uncached flush_icache_all(void)
 	 * back_to_cached() will take care of the barrier for us, don't add
 	 * another one!
 	 */
+
 	back_to_cached();
+	local_irq_restore(flags);
 }
 
 static inline void flush_dcache_all(void)
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 2f9dd6df00a..467ff8e260f 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -34,22 +34,28 @@ static inline void
 sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid,
 			   unsigned long paddr)
 {
+	local_irq_disable();
 	sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr);
 }
 
 static inline void sh64_teardown_dtlb_cache_slot(void)
 {
 	sh64_teardown_tlb_slot(dtlb_cache_slot);
+	local_irq_enable();
 }
 
 static inline void sh64_icache_inv_all(void)
 {
 	unsigned long long addr, flag, data;
+	unsigned long flags;
 
 	addr = ICCR0;
 	flag = ICCR0_ICI;
 	data = 0;
 
+	/* Make this a critical section for safety (probably not strictly necessary.) */
+	local_irq_save(flags);
+
 	/* Without %1 it gets unexplicably wrong */
 	__asm__ __volatile__ (
 		"getcfg	%3, 0, %0\n\t"
@@ -58,6 +64,8 @@ static inline void sh64_icache_inv_all(void)
 		"synci"
 		: "=&r" (data)
 		: "0" (data), "r" (flag), "r" (addr));
+
+	local_irq_restore(flags);
 }
 
 static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end)
@@ -82,6 +90,7 @@ static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long
 	   Also, eaddr is page-aligned. */
 	unsigned int cpu = smp_processor_id();
 	unsigned long long addr, end_addr;
+	unsigned long flags = 0;
 	unsigned long running_asid, vma_asid;
 	addr = eaddr;
 	end_addr = addr + PAGE_SIZE;
@@ -102,9 +111,10 @@ static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long
 
 	running_asid = get_asid();
 	vma_asid = cpu_asid(cpu, vma->vm_mm);
-	if (running_asid != vma_asid)
+	if (running_asid != vma_asid) {
+		local_irq_save(flags);
 		switch_and_save_asid(vma_asid);
-
+	}
 	while (addr < end_addr) {
 		/* Worth unrolling a little */
 		__asm__ __volatile__("icbi %0,  0" : : "r" (addr));
@@ -113,9 +123,10 @@ static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long
 		__asm__ __volatile__("icbi %0, 96" : : "r" (addr));
 		addr += 128;
 	}
-
-	if (running_asid != vma_asid)
+	if (running_asid != vma_asid) {
 		switch_and_save_asid(running_asid);
+		local_irq_restore(flags);
+	}
 }
 
 static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
@@ -148,12 +159,16 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
 		unsigned long eaddr;
 		unsigned long after_last_page_start;
 		unsigned long mm_asid, current_asid;
+		unsigned long flags = 0;
 
 		mm_asid = cpu_asid(smp_processor_id(), mm);
 		current_asid = get_asid();
 
-		if (mm_asid != current_asid)
+		if (mm_asid != current_asid) {
+			/* Switch ASID and run the invalidate loop under cli */
+			local_irq_save(flags);
 			switch_and_save_asid(mm_asid);
+		}
 
 		aligned_start = start & PAGE_MASK;
 		after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK);
@@ -179,8 +194,10 @@ static void sh64_icache_inv_user_page_range(struct mm_struct *mm,
 			aligned_start = vma->vm_end; /* Skip to start of next region */
 		}
 
-		if (mm_asid != current_asid)
+		if (mm_asid != current_asid) {
 			switch_and_save_asid(current_asid);
+			local_irq_restore(flags);
+		}
 	}
 }
 
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 9dc38660e3d..6293f57fa88 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -81,6 +81,7 @@ static void sh7705_flush_icache_range(void *args)
 static void __flush_dcache_page(unsigned long phys)
 {
 	unsigned long ways, waysize, addrstart;
+	unsigned long flags;
 
 	phys |= SH_CACHE_VALID;
 
@@ -97,6 +98,7 @@ static void __flush_dcache_page(unsigned long phys)
 	 * potential cache aliasing, therefore the optimisation is probably not
 	 * possible.
 	 */
+	local_irq_save(flags);
 	jump_to_uncached();
 
 	ways = current_cpu_data.dcache.ways;
@@ -124,6 +126,7 @@ static void __flush_dcache_page(unsigned long phys)
 	} while (--ways);
 
 	back_to_cached();
+	local_irq_restore(flags);
 }
 
 /*
@@ -142,9 +145,14 @@ static void sh7705_flush_dcache_page(void *page)
 
 static void sh7705_flush_cache_all(void *args)
 {
+	unsigned long flags;
+
+	local_irq_save(flags);
 	jump_to_uncached();
+
 	cache_wback_all();
 	back_to_cached();
+	local_irq_restore(flags);
 }
 
 /*
-- 
cgit v1.2.3


From 6f3795788b030c3c190fa063adfe519e016cc6fd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 1 Sep 2009 21:21:36 +0900
Subject: sh: Fix up UP deadlock with SMP-aware cache ops.

This builds on top of the previous reversion and implements a special
on_each_cpu() variant that simple disables preemption across the call
while leaving the interrupt state to the function itself. There were some
unintended consequences with IRQ disabling in some of these paths on UP
that ran in to a deadlock scenario with IRQs being missed.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 411fe605842..db2b1c5beff 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -34,6 +34,15 @@ static inline void noop__flush_region(void *start, int size)
 {
 }
 
+static inline void cacheop_on_each_cpu(void (*func) (void *info), void *info,
+                                   int wait)
+{
+	preempt_disable();
+	smp_call_function(func, info, wait);
+	func(info);
+	preempt_enable();
+}
+
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long vaddr, void *dst, const void *src,
 		       unsigned long len)
@@ -149,17 +158,17 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 
 void flush_cache_all(void)
 {
-	on_each_cpu(local_flush_cache_all, NULL, 1);
+	cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
 }
 
 void flush_cache_mm(struct mm_struct *mm)
 {
-	on_each_cpu(local_flush_cache_mm, mm, 1);
+	cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
 }
 
 void flush_cache_dup_mm(struct mm_struct *mm)
 {
-	on_each_cpu(local_flush_cache_dup_mm, mm, 1);
+	cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
 }
 
 void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
@@ -171,7 +180,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
 	data.addr1 = addr;
 	data.addr2 = pfn;
 
-	on_each_cpu(local_flush_cache_page, (void *)&data, 1);
+	cacheop_on_each_cpu(local_flush_cache_page, (void *)&data, 1);
 }
 
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
@@ -183,12 +192,12 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 	data.addr1 = start;
 	data.addr2 = end;
 
-	on_each_cpu(local_flush_cache_range, (void *)&data, 1);
+	cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
 }
 
 void flush_dcache_page(struct page *page)
 {
-	on_each_cpu(local_flush_dcache_page, page, 1);
+	cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
 }
 
 void flush_icache_range(unsigned long start, unsigned long end)
@@ -199,18 +208,18 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	data.addr1 = start;
 	data.addr2 = end;
 
-	on_each_cpu(local_flush_icache_range, (void *)&data, 1);
+	cacheop_on_each_cpu(local_flush_icache_range, (void *)&data, 1);
 }
 
 void flush_icache_page(struct vm_area_struct *vma, struct page *page)
 {
 	/* Nothing uses the VMA, so just pass the struct page along */
-	on_each_cpu(local_flush_icache_page, page, 1);
+	cacheop_on_each_cpu(local_flush_icache_page, page, 1);
 }
 
 void flush_cache_sigtramp(unsigned long address)
 {
-	on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
+	cacheop_on_each_cpu(local_flush_cache_sigtramp, (void *)address, 1);
 }
 
 static void compute_alias(struct cache_info *c)
-- 
cgit v1.2.3


From 5010c4f7e65b48205cd5ce8147ddf121f3fc7ce7 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 1 Sep 2009 22:37:10 +0900
Subject: sh: disable trapped I/O on SH7785LCR.

This board doesn't use trapped I/O for anything, so just kill off the
select. This was causing problems in the unhandled page fault die path.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index ee5bb200c71..aedd9deb5de 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -160,7 +160,6 @@ config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED if MMU
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
-- 
cgit v1.2.3


From d1af119a69fc9a625bd57a66d9c9fa88795b082c Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 1 Sep 2009 22:38:27 +0900
Subject: sh: Fix up build warning for SH7785LCR proto board.

This fixes up a build warning introduced by the proto board resource
changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-sh7785lcr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 726427c3522..e5a8a2fde39 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -285,7 +285,7 @@ static int __init sh7785lcr_devices_setup(void)
 				ARRAY_SIZE(sh7785lcr_i2c_devices));
 
 	if (mach_is_sh7785lcr_pt()) {
-		i2c_device.resource = &i2c_proto_resources;
+		i2c_device.resource = i2c_proto_resources;
 		i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
 	}
 
-- 
cgit v1.2.3


From 0395ac6447c05e9393d4f8187ea6588b9d1daeb7 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 4 Aug 2009 16:49:52 +0200
Subject: CRIS: convert to asm-generic/hardirq.h

Convert CRIS to use asm-generic/hardirq.h
Also remove unneeded (incorrect) prototypes for setup_irq().

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/arch-v10/kernel/time.c |  1 -
 arch/cris/arch-v32/kernel/smp.c  |  2 --
 arch/cris/arch-v32/kernel/time.c |  1 -
 arch/cris/include/asm/hardirq.h  | 12 ++----------
 arch/cris/kernel/irq.c           |  5 -----
 5 files changed, 2 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 2b73c7a5b64..31ca1418d5a 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -28,7 +28,6 @@
 
 extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
 extern int have_rtc;
 
 unsigned long get_ns_in_jiffie(void)
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index d2a3ff8c4d3..058adddf4e4 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -52,8 +52,6 @@ static struct mm_struct* flush_mm;
 static struct vm_area_struct* flush_vma;
 static unsigned long flush_addr;
 
-extern int setup_irq(int, struct irqaction *);
-
 /* Mode registers */
 static unsigned long irq_regs[NR_CPUS] = {
   regi_irq,
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 65633d0dab8..b1920d8de40 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -46,7 +46,6 @@ unsigned long timer_regs[NR_CPUS] =
 
 extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
 extern int have_rtc;
 
 #ifdef CONFIG_CPU_FREQ
diff --git a/arch/cris/include/asm/hardirq.h b/arch/cris/include/asm/hardirq.h
index 74178adeb1c..17bb12d760b 100644
--- a/arch/cris/include/asm/hardirq.h
+++ b/arch/cris/include/asm/hardirq.h
@@ -2,16 +2,6 @@
 #define __ASM_HARDIRQ_H
 
 #include <asm/irq.h>
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
 
 #define HARDIRQ_BITS	8
 
@@ -24,4 +14,6 @@ void ack_bad_irq(unsigned int irq);
 # error HARDIRQ_BITS is too low!
 #endif
 
+#include <asm-generic/hardirq.h>
+
 #endif /* __ASM_HARDIRQ_H */
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index 7f642fcffbf..0ca7d9892cc 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -38,11 +38,6 @@
 
 #include <asm/io.h>
 
-void ack_bad_irq(unsigned int irq)
-{
-	printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, j;
-- 
cgit v1.2.3


From 62f589c5e391dc2081db42e801382304c652e43a Mon Sep 17 00:00:00 2001
From: Stoyan Gaydarov <sgayda2@uiuc.edu>
Date: Wed, 22 Jul 2009 05:02:33 +0200
Subject: ARRAY_SIZE changes

These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/

Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/arch-v32/mach-a3/io.c | 2 +-
 arch/cris/arch-v32/mach-fs/io.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c
index c22f67ecd9f..090ceb99ef0 100644
--- a/arch/cris/arch-v32/mach-a3/io.c
+++ b/arch/cris/arch-v32/mach-a3/io.c
@@ -36,7 +36,7 @@ struct crisv32_ioport crisv32_ioports[] = {
 	},
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led_net0_green;
 struct crisv32_iopin crisv32_led_net0_red;
diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c
index cb6327b1f8f..a6958661fa8 100644
--- a/arch/cris/arch-v32/mach-fs/io.c
+++ b/arch/cris/arch-v32/mach-fs/io.c
@@ -52,7 +52,7 @@ struct crisv32_ioport crisv32_ioports[] = {
 	}
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led_net0_green;
 struct crisv32_iopin crisv32_led_net0_red;
-- 
cgit v1.2.3


From db39d5529d347de5e2eec1a72d67fcfacae6c5a2 Mon Sep 17 00:00:00 2001
From: Mark Langsdorf <mark.langsdorf@amd.com>
Date: Fri, 21 Aug 2009 19:15:28 -0500
Subject: [CPUFREQ] Powernow-k8: Enable more than 2 low P-states

Remove an obsolete check that used to prevent there being more
than 2 low P-states.  Now that low-to-low P-states changes are
enabled, it prevents otherwise workable configurations with
multiple low P-states.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Tested-by: Krists Krilovs <pow@pow.za.net>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 29 ++++-------------------------
 1 file changed, 4 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 2a50ef89100..0cbce0481a5 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -854,6 +854,10 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 		goto err_out;
 	}
 
+	/* fill in data */
+	data->numps = data->acpi_data.state_count;
+	powernow_k8_acpi_pst_values(data, 0);
+
 	if (cpu_family == CPU_HW_PSTATE)
 		ret_val = fill_powernow_table_pstate(data, powernow_table);
 	else
@@ -866,11 +870,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	powernow_table[data->acpi_data.state_count].index = 0;
 	data->powernow_table = powernow_table;
 
-	/* fill in data */
-	data->numps = data->acpi_data.state_count;
 	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
 		print_basics(data);
-	powernow_k8_acpi_pst_values(data, 0);
 
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);
@@ -941,7 +942,6 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
-	int cntlofreq = 0;
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 fid;
@@ -982,27 +982,6 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 			continue;
 		}
 
-		/* verify only 1 entry from the lo frequency table */
-		if (fid < HI_FID_TABLE_BOTTOM) {
-			if (cntlofreq) {
-				/* if both entries are the same,
-				 * ignore this one ... */
-				if ((freq != powernow_table[cntlofreq].frequency) ||
-				    (index != powernow_table[cntlofreq].index)) {
-					printk(KERN_ERR PFX
-						"Too many lo freq table "
-						"entries\n");
-					return 1;
-				}
-
-				dprintk("double low frequency table entry, "
-						"ignoring it.\n");
-				invalidate_entry(data, i);
-				continue;
-			} else
-				cntlofreq = i;
-		}
-
 		if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
 			printk(KERN_INFO PFX "invalid freq entries "
 				"%u kHz vs. %u kHz\n", freq,
-- 
cgit v1.2.3


From 1a8e42fa81e62d47cc471f7764f906bb42b27a54 Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Wed, 26 Aug 2009 13:19:37 -0400
Subject: [CPUFREQ] Create a blacklist for processors that should not load the
 acpi-cpufreq module.

Create a blacklist for processors that should not load the acpi-cpufreq module.

The initial entry in the blacklist function is the Intel 0f68 processor.  It's
specification update mentions errata AL30 which implies that cpufreq should not
run on this processor.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index ae9b503220c..badce508406 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -588,6 +588,21 @@ static const struct dmi_system_id sw_any_bug_dmi_table[] = {
 	},
 	{ }
 };
+
+static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
+{
+	/* http://www.intel.com/Assets/PDF/specupdate/314554.pdf
+	 * AL30: A Machine Check Exception (MCE) Occurring during an
+	 * Enhanced Intel SpeedStep Technology Ratio Change May Cause
+	 * Both Processor Cores to Lock Up when HT is enabled*/
+	if (c->x86_vendor == X86_VENDOR_INTEL) {
+		if ((c->x86 == 15) &&
+		    (c->x86_model == 6) &&
+		    (c->x86_mask == 8) && smt_capable())
+			return -ENODEV;
+		}
+	return 0;
+}
 #endif
 
 static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
@@ -602,6 +617,12 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	dprintk("acpi_cpufreq_cpu_init\n");
 
+#ifdef CONFIG_SMP
+	result = acpi_cpufreq_blacklist(c);
+	if (result)
+		return result;
+#endif
+
 	data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
-- 
cgit v1.2.3


From f6909f394c2d4a0a71320797df72d54c49c5927e Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 1 Sep 2009 13:31:52 -0700
Subject: x86, msr: fix msr-reg.S compilation with gas 2.16.1

msr-reg.S used the :req option on a macro argument, which wasn't
supported by gas 2.16.1 (but apparently by some earlier versions of
gas, just to be confusing.)  It isn't necessary, so just remove it.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
---
 arch/x86/lib/msr-reg.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index 9e8cdcf5d73..d5eaf53aa67 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -11,7 +11,7 @@
  * reg layout: u32 gprs[eax, ecx, edx, ebx, esp, ebp, esi, edi]
  *
  */
-.macro op_safe_regs op:req
+.macro op_safe_regs op
 ENTRY(native_\op\()_safe_regs)
 	CFI_STARTPROC
 	pushq_cfi %rbx
-- 
cgit v1.2.3


From e7a088f935180b90cfe6ab0aaae8a556f46885fe Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Tue, 1 Sep 2009 17:54:07 -0700
Subject: sparc: convert /proc/io_map, /proc/dvma_map to seq_file

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/ioport.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 87ea0d03d97..e71ce79d8c1 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -35,6 +35,7 @@
 #include <linux/slab.h>
 #include <linux/pci.h>		/* struct pci_dev */
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/scatterlist.h>
 #include <linux/of_device.h>
 
@@ -663,26 +664,33 @@ EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
 
 #ifdef CONFIG_PROC_FS
 
-static int
-_sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof,
-    void *data)
+static int sparc_io_proc_show(struct seq_file *m, void *v)
 {
-	char *p = buf, *e = buf + length;
-	struct resource *r;
+	struct resource *root = m->private, *r;
 	const char *nm;
 
-	for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
-		if (p + 32 >= e)	/* Better than nothing */
-			break;
+	for (r = root->child; r != NULL; r = r->sibling) {
 		if ((nm = r->name) == 0) nm = "???";
-		p += sprintf(p, "%016llx-%016llx: %s\n",
+		seq_printf(m, "%016llx-%016llx: %s\n",
 				(unsigned long long)r->start,
 				(unsigned long long)r->end, nm);
 	}
 
-	return p-buf;
+	return 0;
 }
 
+static int sparc_io_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sparc_io_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations sparc_io_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= sparc_io_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 #endif /* CONFIG_PROC_FS */
 
 /*
@@ -707,7 +715,7 @@ static struct resource *_sparc_find_resource(struct resource *root,
 static void register_proc_sparc_ioport(void)
 {
 #ifdef CONFIG_PROC_FS
-	create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap);
-	create_proc_read_entry("dvma_map",0,NULL,_sparc_io_get_info,&_sparc_dvma);
+	proc_create_data("io_map", 0, NULL, &sparc_io_proc_fops, &sparc_iomap);
+	proc_create_data("dvma_map", 0, NULL, &sparc_io_proc_fops, &_sparc_dvma);
 #endif
 }
-- 
cgit v1.2.3


From 69575d388603365f2afbf4166df93152df59b165 Mon Sep 17 00:00:00 2001
From: Shane Wang <shane.wang@intel.com>
Date: Tue, 1 Sep 2009 18:25:07 -0700
Subject: x86, intel_txt: clean up the impact on generic code, unbreak non-x86

Move tboot.h from asm to linux to fix the build errors of intel_txt
patch on non-X86 platforms. Remove the tboot code from generic code
init/main.c and kernel/cpu.c.

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig             |   4 +
 arch/x86/include/asm/tboot.h | 197 -------------------------------------------
 arch/x86/kernel/reboot.c     |   3 +-
 arch/x86/kernel/setup.c      |   3 +-
 arch/x86/kernel/smpboot.c    |   2 +-
 arch/x86/kernel/tboot.c      |  58 ++++++++++---
 6 files changed, 54 insertions(+), 213 deletions(-)
 delete mode 100644 arch/x86/include/asm/tboot.h

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 738bdc6b0f8..b66f2102c35 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -178,6 +178,10 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config HAVE_INTEL_TXT
+	def_bool y
+	depends on EXPERIMENTAL && DMAR && ACPI
+
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
 	bool
diff --git a/arch/x86/include/asm/tboot.h b/arch/x86/include/asm/tboot.h
deleted file mode 100644
index b13929d4e5f..00000000000
--- a/arch/x86/include/asm/tboot.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * tboot.h: shared data structure with tboot and kernel and functions
- *          used by kernel for runtime support of Intel(R) Trusted
- *          Execution Technology
- *
- * Copyright (c) 2006-2009, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef _ASM_TBOOT_H
-#define _ASM_TBOOT_H
-
-#include <acpi/acpi.h>
-
-/* these must have the values from 0-5 in this order */
-enum {
-	TB_SHUTDOWN_REBOOT = 0,
-	TB_SHUTDOWN_S5,
-	TB_SHUTDOWN_S4,
-	TB_SHUTDOWN_S3,
-	TB_SHUTDOWN_HALT,
-	TB_SHUTDOWN_WFS
-};
-
-#ifdef CONFIG_INTEL_TXT
-
-/* used to communicate between tboot and the launched kernel */
-
-#define TB_KEY_SIZE             64   /* 512 bits */
-
-#define MAX_TB_MAC_REGIONS      32
-
-struct tboot_mac_region {
-	u64  start;         /* must be 64 byte -aligned */
-	u32  size;          /* must be 64 byte -granular */
-} __packed;
-
-/* GAS - Generic Address Structure (ACPI 2.0+) */
-struct tboot_acpi_generic_address {
-	u8  space_id;
-	u8  bit_width;
-	u8  bit_offset;
-	u8  access_width;
-	u64 address;
-} __packed;
-
-/*
- * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec
- * (http://www.acpi.info/)
- */
-struct tboot_acpi_sleep_info {
-	struct tboot_acpi_generic_address pm1a_cnt_blk;
-	struct tboot_acpi_generic_address pm1b_cnt_blk;
-	struct tboot_acpi_generic_address pm1a_evt_blk;
-	struct tboot_acpi_generic_address pm1b_evt_blk;
-	u16 pm1a_cnt_val;
-	u16 pm1b_cnt_val;
-	u64 wakeup_vector;
-	u32 vector_width;
-	u64 kernel_s3_resume_vector;
-} __packed;
-
-/*
- * shared memory page used for communication between tboot and kernel
- */
-struct tboot {
-	/*
-	 * version 3+ fields:
-	 */
-
-	/* TBOOT_UUID */
-	u8 uuid[16];
-
-	/* version number: 5 is current */
-	u32 version;
-
-	/* physical addr of tb_log_t log */
-	u32 log_addr;
-
-	/*
-	 * physical addr of entry point for tboot shutdown and
-	 * type of shutdown (TB_SHUTDOWN_*) being requested
-	 */
-	u32 shutdown_entry;
-	u32 shutdown_type;
-
-	/* kernel-specified ACPI info for Sx shutdown */
-	struct tboot_acpi_sleep_info acpi_sinfo;
-
-	/* tboot location in memory (physical) */
-	u32 tboot_base;
-	u32 tboot_size;
-
-	/* memory regions (phys addrs) for tboot to MAC on S3 */
-	u8 num_mac_regions;
-	struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS];
-
-
-	/*
-	 * version 4+ fields:
-	 */
-
-	/* symmetric key for use by kernel; will be encrypted on S3 */
-	u8 s3_key[TB_KEY_SIZE];
-
-
-	/*
-	 * version 5+ fields:
-	 */
-
-	/* used to 4byte-align num_in_wfs */
-	u8 reserved_align[3];
-
-	/* number of processors in wait-for-SIPI */
-	u32 num_in_wfs;
-} __packed;
-
-/*
- * UUID for tboot data struct to facilitate matching
- * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is
- * represented as {} in the char array used here
- */
-#define TBOOT_UUID	{0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\
-			 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8}
-
-extern struct tboot *tboot;
-
-static inline int tboot_enabled(void)
-{
-	return tboot != NULL;
-}
-
-extern void tboot_probe(void);
-extern void tboot_create_trampoline(void);
-extern void tboot_shutdown(u32 shutdown_type);
-extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control);
-extern int tboot_wait_for_aps(int num_aps);
-extern struct acpi_table_header *tboot_get_dmar_table(
-				      struct acpi_table_header *dmar_tbl);
-extern int tboot_force_iommu(void);
-
-#else     /* CONFIG_INTEL_TXT */
-
-static inline int tboot_enabled(void)
-{
-	return 0;
-}
-
-static inline void tboot_probe(void)
-{
-}
-
-static inline void tboot_create_trampoline(void)
-{
-}
-
-static inline void tboot_shutdown(u32 shutdown_type)
-{
-}
-
-static inline void tboot_sleep(u8 sleep_state, u32 pm1a_control,
-			       u32 pm1b_control)
-{
-}
-
-static inline int tboot_wait_for_aps(int num_aps)
-{
-	return 0;
-}
-
-static inline struct acpi_table_header *tboot_get_dmar_table(
-					struct acpi_table_header *dmar_tbl)
-{
-	return dmar_tbl;
-}
-
-static inline int tboot_force_iommu(void)
-{
-	return 0;
-}
-
-#endif /* !CONFIG_INTEL_TXT */
-
-#endif /* _ASM_TBOOT_H */
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 9de01c5d979..18ce5c04242 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/efi.h>
+#include <linux/tboot.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
 #include <asm/apic.h>
@@ -24,8 +25,6 @@
 # include <asm/iommu.h>
 #endif
 
-#include <asm/tboot.h>
-
 /*
  * Power off function, if any
  */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 80d6e9e3248..6ce0d6f38f7 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -66,6 +66,7 @@
 
 #include <linux/percpu.h>
 #include <linux/crash_dump.h>
+#include <linux/tboot.h>
 
 #include <video/edid.h>
 
@@ -145,8 +146,6 @@ struct boot_params __initdata boot_params;
 struct boot_params boot_params;
 #endif
 
-#include <asm/tboot.h>
-
 /*
  * Machine setup..
  */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 61cc40887c4..7d9d8eea20a 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -47,6 +47,7 @@
 #include <linux/bootmem.h>
 #include <linux/err.h>
 #include <linux/nmi.h>
+#include <linux/tboot.h>
 
 #include <asm/acpi.h>
 #include <asm/desc.h>
@@ -62,7 +63,6 @@
 #include <asm/vmi.h>
 #include <asm/apic.h>
 #include <asm/setup.h>
-#include <asm/tboot.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index c2e760ca7b0..86c9f91b48a 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -22,11 +22,14 @@
 #include <linux/dma_remapping.h>
 #include <linux/init_task.h>
 #include <linux/spinlock.h>
+#include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/dmar.h>
+#include <linux/cpu.h>
 #include <linux/pfn.h>
 #include <linux/mm.h>
+#include <linux/tboot.h>
 
 #include <asm/trampoline.h>
 #include <asm/processor.h>
@@ -36,7 +39,6 @@
 #include <asm/fixmap.h>
 #include <asm/proto.h>
 #include <asm/setup.h>
-#include <asm/tboot.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 
@@ -154,13 +156,10 @@ static int map_tboot_pages(unsigned long vaddr, unsigned long start_pfn,
 	return 0;
 }
 
-void tboot_create_trampoline(void)
+static void tboot_create_trampoline(void)
 {
 	u32 map_base, map_size;
 
-	if (!tboot_enabled())
-		return;
-
 	/* Create identity map for tboot shutdown code. */
 	map_base = PFN_DOWN(tboot->tboot_base);
 	map_size = PFN_UP(tboot->tboot_size);
@@ -295,21 +294,58 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
 	tboot_shutdown(acpi_shutdown_map[sleep_state]);
 }
 
-int tboot_wait_for_aps(int num_aps)
+static atomic_t ap_wfs_count;
+
+static int tboot_wait_for_aps(int num_aps)
 {
 	unsigned long timeout;
 
+	timeout = AP_WAIT_TIMEOUT*HZ;
+	while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps &&
+	       timeout) {
+		mdelay(1);
+		timeout--;
+	}
+
+	if (timeout)
+		pr_warning("tboot wait for APs timeout\n");
+
+	return !(atomic_read((atomic_t *)&tboot->num_in_wfs) == num_aps);
+}
+
+static int __cpuinit tboot_cpu_callback(struct notifier_block *nfb,
+			unsigned long action, void *hcpu)
+{
+	switch (action) {
+	case CPU_DYING:
+		atomic_inc(&ap_wfs_count);
+		if (num_online_cpus() == 1)
+			if (tboot_wait_for_aps(atomic_read(&ap_wfs_count)))
+				return NOTIFY_BAD;
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block tboot_cpu_notifier __cpuinitdata =
+{
+	.notifier_call = tboot_cpu_callback,
+};
+
+static __init int tboot_late_init(void)
+{
 	if (!tboot_enabled())
 		return 0;
 
-	timeout = jiffies + AP_WAIT_TIMEOUT*HZ;
-	while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps &&
-	       time_before(jiffies, timeout))
-		cpu_relax();
+	tboot_create_trampoline();
 
-	return time_before(jiffies, timeout) ? 0 : 1;
+	atomic_set(&ap_wfs_count, 0);
+	register_hotcpu_notifier(&tboot_cpu_notifier);
+	return 0;
 }
 
+late_initcall(tboot_late_init);
+
 /*
  * TXT configuration registers (offsets from TXT_{PUB, PRIV}_CONFIG_REGS_BASE)
  */
-- 
cgit v1.2.3


From ae4b688db2432baad379f73fdcac13ec24f603d5 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Mon, 31 Aug 2009 13:11:54 +0800
Subject: x86: Move kernel_fpu_using to irq_fpu_usable in asm/i387.h

This function measures whether the FPU/SSE state can be touched in
interrupt context. If the interrupted code is in user space or has no
valid FPU/SSE context (CR0.TS == 1), FPU/SSE state can be used in IRQ
or soft_irq context too.

This is used by AES-NI accelerated AES implementation and PCLMULQDQ
accelerated GHASH implementation.

v3:
 - Renamed to irq_fpu_usable to reflect the purpose of the function.

v2:
 - Renamed to irq_is_fpu_using to reflect the real situation.

Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/crypto/aesni-intel_glue.c | 17 +++++------------
 arch/x86/include/asm/i387.h        |  8 ++++++++
 2 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index c580c5ec1ca..7667235ade1 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -59,13 +59,6 @@ asmlinkage void aesni_cbc_enc(struct crypto_aes_ctx *ctx, u8 *out,
 asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
 			      const u8 *in, unsigned int len, u8 *iv);
 
-static inline int kernel_fpu_using(void)
-{
-	if (in_interrupt() && !(read_cr0() & X86_CR0_TS))
-		return 1;
-	return 0;
-}
-
 static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx)
 {
 	unsigned long addr = (unsigned long)raw_ctx;
@@ -89,7 +82,7 @@ static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx,
 		return -EINVAL;
 	}
 
-	if (kernel_fpu_using())
+	if (irq_fpu_usable())
 		err = crypto_aes_expand_key(ctx, in_key, key_len);
 	else {
 		kernel_fpu_begin();
@@ -110,7 +103,7 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-	if (kernel_fpu_using())
+	if (irq_fpu_usable())
 		crypto_aes_encrypt_x86(ctx, dst, src);
 	else {
 		kernel_fpu_begin();
@@ -123,7 +116,7 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-	if (kernel_fpu_using())
+	if (irq_fpu_usable())
 		crypto_aes_decrypt_x86(ctx, dst, src);
 	else {
 		kernel_fpu_begin();
@@ -349,7 +342,7 @@ static int ablk_encrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (kernel_fpu_using()) {
+	if (irq_fpu_usable()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 		memcpy(cryptd_req, req, sizeof(*req));
@@ -370,7 +363,7 @@ static int ablk_decrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (kernel_fpu_using()) {
+	if (irq_fpu_usable()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 		memcpy(cryptd_req, req, sizeof(*req));
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 175adf58dd4..fb7f0d64e14 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -301,6 +301,14 @@ static inline void kernel_fpu_end(void)
 	preempt_enable();
 }
 
+static inline bool irq_fpu_usable(void)
+{
+	struct pt_regs *regs;
+
+	return !in_interrupt() || !(regs = get_irq_regs()) || \
+		user_mode(regs) || (read_cr0() & X86_CR0_TS);
+}
+
 /*
  * Some instructions like VIA's padlock instructions generate a spurious
  * DNA fault but don't modify SSE registers. And these instructions
-- 
cgit v1.2.3


From 0ed2c722c650513ba4bce868c7a052e576c060e2 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 28 Aug 2009 08:58:16 +0000
Subject: powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()

The two versions are doing almost exactly the same thing.  No need to
maintain them as separate files.  This patch also has the side effect
of making the PCI device tree scanning code available to 32 bit powerpc
machines, but no board ports actually make use of this feature at this
point.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pci.h             |  2 ++
 arch/powerpc/include/asm/ppc-pci.h         |  1 -
 arch/powerpc/kernel/of_platform.c          |  2 +-
 arch/powerpc/kernel/pci-common.c           | 49 ++++++++++++++++++++++++++++++
 arch/powerpc/kernel/pci_32.c               | 25 ++-------------
 arch/powerpc/kernel/pci_64.c               | 46 ++++------------------------
 arch/powerpc/platforms/pseries/pci_dlpar.c |  2 +-
 7 files changed, 61 insertions(+), 66 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index b856a837b4a..7aca4839387 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -233,6 +233,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
 
 extern void pcibios_setup_bus_devices(struct pci_bus *bus);
 extern void pcibios_setup_bus_self(struct pci_bus *bus);
+extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
+extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata);
 
 #endif	/* __KERNEL__ */
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 854ab713f56..2828f9d0f66 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -39,7 +39,6 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 
 extern void pci_devs_phb_init(void);
 extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-extern void scan_phb(struct pci_controller *hose);
 
 /* From rtas_pci.h */
 extern void init_pci_config_tokens (void);
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 87df428e358..1a4fc0d11a0 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -276,7 +276,7 @@ static int __devinit of_pci_phb_probe(struct of_device *dev,
 #endif /* CONFIG_EEH */
 
 	/* Scan the bus */
-	scan_phb(phb);
+	pcibios_scan_phb(phb, dev->node);
 	if (phb->bus == NULL)
 		return -ENXIO;
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 8f84a9a8428..e9f4840096b 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1688,3 +1688,52 @@ int early_find_capability(struct pci_controller *hose, int bus, int devfn,
 {
 	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
 }
+
+/**
+ * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
+ * @hose: Pointer to the PCI host controller instance structure
+ * @sysdata: value to use for sysdata pointer.  ppc32 and ppc64 differ here
+ *
+ * Note: the 'data' pointer is a temporary measure.  As 32 and 64 bit
+ * pci code gets merged, this parameter should become unnecessary because
+ * both will use the same value.
+ */
+void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+{
+	struct pci_bus *bus;
+	struct device_node *node = hose->dn;
+	int mode;
+
+	pr_debug("PCI: Scanning PHB %s\n",
+		 node ? node->full_name : "<NO NAME>");
+
+	/* Create an empty bus for the toplevel */
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
+			     sysdata);
+	if (bus == NULL) {
+		pr_err("Failed to create bus for PCI domain %04x\n",
+			hose->global_number);
+		return;
+	}
+	bus->secondary = hose->first_busno;
+	hose->bus = bus;
+
+	/* Get some IO space for the new PHB */
+	pcibios_setup_phb_io_space(hose);
+
+	/* Wire up PHB bus resources */
+	pcibios_setup_phb_resources(hose);
+
+	/* Get probe mode and perform scan */
+	mode = PCI_PROBE_NORMAL;
+	if (node && ppc_md.pci_probe_mode)
+		mode = ppc_md.pci_probe_mode(bus);
+	pr_debug("    probe mode: %d\n", mode);
+	if (mode == PCI_PROBE_DEVTREE) {
+		bus->subordinate = hose->last_busno;
+		of_scan_bus(node, bus);
+	}
+
+	if (mode == PCI_PROBE_NORMAL)
+		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 8cf15d961c3..c13668cf36d 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -354,36 +354,15 @@ pci_create_OF_bus_map(void)
 	}
 }
 
-static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
 {
-	struct pci_bus *bus;
-	struct device_node *node = hose->dn;
 	unsigned long io_offset;
 	struct resource *res = &hose->io_resource;
 
-	pr_debug("PCI: Scanning PHB %s\n",
-		 node ? node->full_name : "<NO NAME>");
-
-	/* Create an empty bus for the toplevel */
-	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
-	if (bus == NULL) {
-		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
-		       hose->global_number);
-		return;
-	}
-	bus->secondary = hose->first_busno;
-	hose->bus = bus;
-
 	/* Fixup IO space offset */
 	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
 	res->start = (res->start + io_offset) & 0xffffffffu;
 	res->end = (res->end + io_offset) & 0xffffffffu;
-
-	/* Wire up PHB bus resources */
-	pcibios_setup_phb_resources(hose);
-
-	/* Scan children */
-	hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
 }
 
 static int __init pcibios_init(void)
@@ -401,7 +380,7 @@ static int __init pcibios_init(void)
 		if (pci_assign_all_buses)
 			hose->first_busno = next_busno;
 		hose->last_busno = 0xff;
-		pcibios_scan_phb(hose);
+		pcibios_scan_phb(hose, hose);
 		pci_bus_add_devices(hose->bus);
 		if (pci_assign_all_buses || next_busno <= hose->last_busno)
 			next_busno = hose->last_busno + pcibios_assign_bus_offset;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 4d5b4ced7e4..ba949a2c93a 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,45 +43,6 @@ unsigned long pci_probe_only = 1;
 unsigned long pci_io_base = ISA_IO_BASE;
 EXPORT_SYMBOL(pci_io_base);
 
-void __devinit scan_phb(struct pci_controller *hose)
-{
-	struct pci_bus *bus;
-	struct device_node *node = hose->dn;
-	int mode;
-
-	pr_debug("PCI: Scanning PHB %s\n",
-		 node ? node->full_name : "<NO NAME>");
-
-	/* Create an empty bus for the toplevel */
-	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
-	if (bus == NULL) {
-		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
-		       hose->global_number);
-		return;
-	}
-	bus->secondary = hose->first_busno;
-	hose->bus = bus;
-
-	/* Get some IO space for the new PHB */
-	pcibios_map_io_space(bus);
-
-	/* Wire up PHB bus resources */
-	pcibios_setup_phb_resources(hose);
-
-	/* Get probe mode and perform scan */
-	mode = PCI_PROBE_NORMAL;
-	if (node && ppc_md.pci_probe_mode)
-		mode = ppc_md.pci_probe_mode(bus);
-	pr_debug("    probe mode: %d\n", mode);
-	if (mode == PCI_PROBE_DEVTREE) {
-		bus->subordinate = hose->last_busno;
-		of_scan_bus(node, bus);
-	}
-
-	if (mode == PCI_PROBE_NORMAL)
-		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
-}
-
 static int __init pcibios_init(void)
 {
 	struct pci_controller *hose, *tmp;
@@ -103,7 +64,7 @@ static int __init pcibios_init(void)
 
 	/* Scan all of the recorded PCI controllers.  */
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		scan_phb(hose);
+		pcibios_scan_phb(hose, hose->dn);
 		pci_bus_add_devices(hose->bus);
 	}
 
@@ -237,6 +198,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 }
 EXPORT_SYMBOL_GPL(pcibios_map_io_space);
 
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
+{
+	pcibios_map_io_space(hose->bus);
+}
+
 #define IOBASE_BRIDGE_NUMBER	0
 #define IOBASE_MEMORY		1
 #define IOBASE_IO		2
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index ad152a0e394..b6fa3e4b51b 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -151,7 +151,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
 	if (dn->child)
 		eeh_add_device_tree_early(dn);
 
-	scan_phb(phb);
+	pcibios_scan_phb(phb, dn);
 	pcibios_finish_adding_to_bus(phb->bus);
 
 	return phb;
-- 
cgit v1.2.3


From 46db2f86a3b2a94e0b33e0b4548fb7b7b6bdff66 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 28 Aug 2009 12:06:29 +0000
Subject: powerpc/pseries: Fix to handle slb resize across migration

The SLB can change sizes across a live migration, which was not
being handled, resulting in possible machine crashes during
migration if migrating to a machine which has a smaller max SLB
size than the source machine. Fix this by first reducing the
SLB size to the minimum possible value, which is 32, prior to
migration. Then during the device tree update which occurs after
migration, we make the call to ensure the SLB gets updated. Also
add the slb_size to the lparcfg output so that the migration
tools can check to make sure the kernel has this capability
before allowing migration in scenarios where the SLB size will change.

BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid
      breaking ppc32 build

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-hash64.h     |  2 ++
 arch/powerpc/kernel/lparcfg.c             |  3 +++
 arch/powerpc/kernel/rtas.c                |  7 ++++++-
 arch/powerpc/mm/slb.c                     | 16 ++++++++++++----
 arch/powerpc/platforms/pseries/reconfig.c |  9 ++++++++-
 5 files changed, 31 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index b537903b9fc..bebe31c2e90 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -41,6 +41,7 @@ extern char initial_stab[];
 
 #define SLB_NUM_BOLTED		3
 #define SLB_CACHE_ENTRIES	8
+#define SLB_MIN_SIZE		32
 
 /* Bits in the SLB ESID word */
 #define SLB_ESID_V		ASM_CONST(0x0000000008000000) /* valid */
@@ -276,6 +277,7 @@ extern void slb_flush_and_rebolt(void);
 extern void stab_initialize(unsigned long stab);
 
 extern void slb_vmalloc_update(void);
+extern void slb_set_size(u16 size);
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 2419cc706ff..ed0ac4e4b8d 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
 #include <asm/vio.h>
+#include <asm/mmu.h>
 
 #define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
@@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 
 	seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc);
 
+	seq_printf(m, "slb_size=%d\n", mmu_slb_size);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index c434823b8c8..bf90361bb70 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -39,6 +39,7 @@
 #include <asm/smp.h>
 #include <asm/atomic.h>
 #include <asm/time.h>
+#include <asm/mmu.h>
 
 struct rtas_t rtas = {
 	.lock = __RAW_SPIN_LOCK_UNLOCKED
@@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info)
 {
 	long rc = H_SUCCESS;
 	unsigned long msr_save;
+	u16 slb_size = mmu_slb_size;
 	int cpu;
 	struct rtas_suspend_me_data *data =
 		(struct rtas_suspend_me_data *)info;
@@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info)
 		/* All other cpus are in H_JOIN, this cpu does
 		 * the suspend.
 		 */
+		slb_set_size(SLB_MIN_SIZE);
 		printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n",
 		       smp_processor_id());
 		data->error = rtas_call(data->token, 0, 1, NULL);
 
-		if (data->error)
+		if (data->error) {
 			printk(KERN_DEBUG "ibm,suspend-me returned %d\n",
 			       data->error);
+			slb_set_size(slb_size);
+		}
 	} else {
 		printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
 		       smp_processor_id(), rc);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 07961c5c169..1d98ecc8eec 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -249,14 +249,22 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 static inline void patch_slb_encoding(unsigned int *insn_addr,
 				      unsigned int immed)
 {
-	/* Assume the instruction had a "0" immediate value, just
-	 * "or" in the new value
-	 */
-	*insn_addr |= immed;
+	*insn_addr = (*insn_addr & 0xffff0000) | immed;
 	flush_icache_range((unsigned long)insn_addr, 4+
 			   (unsigned long)insn_addr);
 }
 
+void slb_set_size(u16 size)
+{
+	extern unsigned int *slb_compare_rr_to_size;
+
+	if (mmu_slb_size == size)
+		return;
+
+	mmu_slb_size = size;
+	patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size);
+}
+
 void slb_initialize(void)
 {
 	unsigned long linear_llp, vmalloc_llp, io_llp;
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index b6f1b137d42..2e2bbe120b9 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -20,6 +20,7 @@
 #include <asm/machdep.h>
 #include <asm/uaccess.h>
 #include <asm/pSeries_reconfig.h>
+#include <asm/mmu.h>
 
 
 
@@ -439,9 +440,15 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!newprop)
 		return -ENOMEM;
 
+	if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
+		slb_set_size(*(int *)value);
+
 	oldprop = of_find_property(np, name,NULL);
-	if (!oldprop)
+	if (!oldprop) {
+		if (strlen(name))
+			return prom_add_property(np, newprop);
 		return -ENODEV;
+	}
 
 	rc = prom_update_property(np, newprop, oldprop);
 	if (rc)
-- 
cgit v1.2.3


From 1d5d9527d8ed8d87beb22a4fd954366aeabd12c7 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 1 Sep 2009 15:43:54 +0000
Subject: powerpc/book3e: Add missing page sizes

Add defines for the other page sizes.  Even if HW doesn't support them
we made them use them for hugetlbfs support.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pte-book3e.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
index 9800565aebb..b82b9dc91a7 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -20,9 +20,19 @@
 #define _PAGE_BAP_UX	0x000080
 #define _PAGE_PSIZE_MSK	0x000f00
 #define _PAGE_PSIZE_4K	0x000200
+#define _PAGE_PSIZE_8K	0x000300
+#define _PAGE_PSIZE_16K	0x000400
+#define _PAGE_PSIZE_32K	0x000500
 #define _PAGE_PSIZE_64K	0x000600
+#define _PAGE_PSIZE_128K	0x000700
+#define _PAGE_PSIZE_256K	0x000800
+#define _PAGE_PSIZE_512K	0x000900
 #define _PAGE_PSIZE_1M	0x000a00
+#define _PAGE_PSIZE_2M	0x000b00
+#define _PAGE_PSIZE_4M	0x000c00
+#define _PAGE_PSIZE_8M	0x000d00
 #define _PAGE_PSIZE_16M	0x000e00
+#define _PAGE_PSIZE_32M	0x000f00
 #define _PAGE_DIRTY	0x001000 /* C: page changed */
 #define _PAGE_SW0	0x002000
 #define _PAGE_U3	0x004000
-- 
cgit v1.2.3


From 76acc2c1a7a9a8c2cae7e9cf8d0a8b374a48aa94 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 1 Sep 2009 15:48:42 +0000
Subject: powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT

Switch to using the Power ISA defined PTE format when we have a 64-bit
PTE.  This makes the code handling between fsl-booke and book3e-64
similiar for TLB faults.

Additionally this lets use take advantage of the page size encodings and
full permissions that the HW PTE defines.

Also defined _PMD_PRESENT, _PMD_PRESENT_MASK, and _PMD_BAD since the
32-bit ppc arch code expects them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc32.h |  2 ++
 arch/powerpc/include/asm/pte-book3e.h    |  3 +++
 arch/powerpc/include/asm/pte-fsl-booke.h |  7 -------
 arch/powerpc/kernel/head_fsl_booke.S     | 36 ++++++++++++++++++++++----------
 4 files changed, 30 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index f2c52e25395..55646adfa84 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -111,6 +111,8 @@ extern int icache_44x_need_flush;
 #include <asm/pte-40x.h>
 #elif defined(CONFIG_44x)
 #include <asm/pte-44x.h>
+#elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#include <asm/pte-book3e.h>
 #elif defined(CONFIG_FSL_BOOKE)
 #include <asm/pte-fsl-booke.h>
 #elif defined(CONFIG_8xx)
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
index b82b9dc91a7..082d515930a 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -75,6 +75,9 @@
 /* On 32-bit, we never clear the top part of the PTE */
 #ifdef CONFIG_PPC32
 #define _PTE_NONE_MASK	0xffffffff00000000ULL
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h
index ce8a9e94ce7..2c12be5f677 100644
--- a/arch/powerpc/include/asm/pte-fsl-booke.h
+++ b/arch/powerpc/include/asm/pte-fsl-booke.h
@@ -33,13 +33,6 @@
 #define _PAGE_WRITETHRU	0x00400	/* H: W bit */
 #define _PAGE_SPECIAL	0x00800 /* S: Special page */
 
-#ifdef CONFIG_PTE_64BIT
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK	0xffffffffffff0000ULL
-/* We extend the size of the PTE flags area when using 64-bit PTEs */
-#define PTE_RPN_SHIFT	(PAGE_SHIFT + 8)
-#endif
-
 #define _PMD_PRESENT	0
 #define _PMD_PRESENT_MASK (PAGE_MASK)
 #define _PMD_BAD	(~PAGE_MASK)
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 2c5af525647..975788ca05d 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -575,7 +575,12 @@ interrupt_base:
 	 *       place or can we save a couple of instructions here ?
 	 */
 	mfspr	r12,SPRN_ESR
+#ifdef CONFIG_PTE_64BIT
+	li	r13,_PAGE_PRESENT
+	oris	r13,r13,_PAGE_ACCESSED@h
+#else
 	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+#endif
 	rlwimi	r13,r12,11,29,29
 
 	FIND_PTE
@@ -643,7 +648,12 @@ interrupt_base:
 
 4:
 	/* Make up the required permissions */
+#ifdef CONFIG_PTE_64BIT
+	li	r13,_PAGE_PRESENT | _PAGE_EXEC
+	oris	r13,r13,_PAGE_ACCESSED@h
+#else
 	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#endif
 
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
@@ -733,7 +743,7 @@ finish_tlb_load:
 
 	mfspr	r12, SPRN_MAS2
 #ifdef CONFIG_PTE_64BIT
-	rlwimi	r12, r11, 26, 24, 31	/* extract ...WIMGE from pte */
+	rlwimi	r12, r11, 32-19, 27, 31	/* extract WIMGE from pte */
 #else
 	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
 #endif
@@ -742,6 +752,20 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
+#ifdef CONFIG_PTE_64BIT
+	rlwinm	r12, r11, 32-2, 26, 31	/* Move in perm bits */
+	andi.	r10, r11, _PAGE_DIRTY
+	bne	1f
+	li	r10, MAS3_SW | MAS3_UW
+	andc	r12, r12, r10
+1:	rlwimi	r12, r13, 20, 0, 11	/* grab RPN[32:43] */
+	rlwimi	r12, r11, 20, 12, 19	/* grab RPN[44:51] */
+	mtspr	SPRN_MAS3, r12
+BEGIN_MMU_FTR_SECTION
+	srwi	r10, r13, 12		/* grab RPN[12:31] */
+	mtspr	SPRN_MAS7, r10
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
+#else
 	li	r10, (_PAGE_EXEC | _PAGE_PRESENT)
 	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
 	and	r12, r11, r10
@@ -749,16 +773,6 @@ finish_tlb_load:
 	slwi	r10, r12, 1
 	or	r10, r10, r12
 	iseleq	r12, r12, r10
-	
-#ifdef CONFIG_PTE_64BIT
-	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
-	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
-	mtspr	SPRN_MAS3, r12
-BEGIN_MMU_FTR_SECTION
-	srwi	r10, r13, 8		/* grab RPN[8:31] */
-	mtspr	SPRN_MAS7, r10
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
-#else
 	rlwimi	r11, r12, 0, 20, 31	/* Extract RPN from PTE and merge with perms */
 	mtspr	SPRN_MAS3, r11
 #endif
-- 
cgit v1.2.3


From cede3930f0ca6fef353fa01306c72a01420bd45e Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 31 Aug 2009 21:34:36 +0000
Subject: powerpc: Fix some late PowerMac G5 with PCIe ATI graphics

A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5
with the U4 bridge (latest generations, may also affect the iMac G5
"iSight") is causing us to re-assign the PCI BARs of the video card,
which can get it out of sync with the firmware, thus breaking offb.

This works around it by fixing up the bridge configuration properly
at boot time. It also fixes a bug where the firmware provides us with
an incorrect set of accessible regions in the device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/pci.c | 61 +++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 04cdd32624d..e81403b245b 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1286,3 +1286,64 @@ static void fixup_k2_sata(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
 
+/*
+ * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't
+ * configured by the firmware. The bridge itself seems to ignore them but it
+ * causes problems with Linux which then re-assigns devices below the bridge,
+ * thus changing addresses of those devices from what was in the device-tree,
+ * which sucks when those are video cards using offb
+ *
+ * We could just mark it transparent but I prefer fixing up the resources to
+ * properly show what's going on here, as I have some doubts about having them
+ * badly configured potentially being an issue for DMA.
+ *
+ * We leave PIO alone, it seems to be fine
+ *
+ * Oh and there's another funny bug. The OF properties advertize the region
+ * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's
+ * actually not true, this region is the memory mapped config space. So we
+ * also need to filter it out or we'll map things in the wrong place.
+ */
+static void fixup_u4_pcie(struct pci_dev* dev)
+{
+	struct pci_controller *host = pci_bus_to_host(dev->bus);
+	struct resource *region = NULL;
+	u32 reg;
+	int i;
+
+	/* Only do that on PowerMac */
+	if (!machine_is(powermac))
+		return;
+
+	/* Find the largest MMIO region */
+	for (i = 0; i < 3; i++) {
+		struct resource *r = &host->mem_resources[i];
+		if (!(r->flags & IORESOURCE_MEM))
+			continue;
+		/* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they
+		 * are reserved by HW for other things
+		 */
+		if (r->start >= 0xf0000000 && r->start < 0xf3000000)
+			continue;
+		if (!region || (r->end - r->start) >
+		    (region->end - region->start))
+			region = r;
+	}
+	/* Nothing found, bail */
+	if (region == 0)
+		return;
+
+	/* Print things out */
+	printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region);
+
+	/* Fixup bridge config space. We know it's a Mac, resource aren't
+	 * offset so let's just blast them as-is. We also know that they
+	 * fit in 32 bits
+	 */
+	reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000);
+	pci_write_config_dword(dev, PCI_MEMORY_BASE, reg);
+	pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0);
+	pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0);
+	pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie);
-- 
cgit v1.2.3


From 0fc0b732eaa38beb93a6fb62f77c7bd9622c76ec Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 2 Sep 2009 01:03:33 -0700
Subject: netdev: drivers should make ethtool_ops const

No need to put ethtool_ops in data, they should be const.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/um/drivers/net_kern.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 4c75409bc09..f114813ae25 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -285,7 +285,7 @@ static void uml_net_get_drvinfo(struct net_device *dev,
 	strcpy(info->version, "42");
 }
 
-static struct ethtool_ops uml_net_ethtool_ops = {
+static const struct ethtool_ops uml_net_ethtool_ops = {
 	.get_drvinfo	= uml_net_get_drvinfo,
 	.get_link	= ethtool_op_get_link,
 };
-- 
cgit v1.2.3


From 98b0979f025e5b98ce8f24e6dc0f9713e6f6c88c Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:17:41 +0100
Subject: MMC: MMCI: convert realview MMC to use gpiolib

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 17a07e6acfa..ab615e78b79 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -222,6 +222,9 @@ arch_initcall(realview_i2c_init);
 
 #define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
 static unsigned int realview_mmc_status(struct device *dev)
 {
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -238,15 +241,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 17,
+	.gpio_cd	= 16,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 19,
+	.gpio_cd	= 18,
 };
 
 /*
-- 
cgit v1.2.3


From 35c9221acb133ecc9abd701a1fb6fa909d177a77 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:07:46 +0100
Subject: ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910
 platform

Add the cpu.c and dev.c and modify w90p910 platform
to apply to use the common API(provided by cpu.c and dev.c)
at the same time, I renamed all w90x900 to nuc900 in every
c file of w90x900 platform and touchscreen's driver name.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile          |   8 +-
 arch/arm/mach-w90x900/clksel.c          |  12 +-
 arch/arm/mach-w90x900/clock.c           |   4 +-
 arch/arm/mach-w90x900/clock.h           |   8 +-
 arch/arm/mach-w90x900/cpu.c             | 212 +++++++++++++++++
 arch/arm/mach-w90x900/cpu.h             |  50 ++--
 arch/arm/mach-w90x900/dev.c             | 389 ++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/gpio.c            |  78 +++---
 arch/arm/mach-w90x900/irq.c             |  30 +--
 arch/arm/mach-w90x900/mach-nuc910evb.c  |  44 ++++
 arch/arm/mach-w90x900/mach-w90p910evb.c | 407 --------------------------------
 arch/arm/mach-w90x900/mfp-w90p910.c     | 158 -------------
 arch/arm/mach-w90x900/mfp.c             | 158 +++++++++++++
 arch/arm/mach-w90x900/nuc910.c          |  60 +++++
 arch/arm/mach-w90x900/nuc910.h          |  28 +++
 arch/arm/mach-w90x900/time.c            |  70 +++---
 arch/arm/mach-w90x900/w90p910.c         | 224 ------------------
 17 files changed, 1021 insertions(+), 919 deletions(-)
 create mode 100644 arch/arm/mach-w90x900/cpu.c
 create mode 100644 arch/arm/mach-w90x900/dev.c
 create mode 100644 arch/arm/mach-w90x900/mach-nuc910evb.c
 delete mode 100644 arch/arm/mach-w90x900/mach-w90p910evb.c
 delete mode 100644 arch/arm/mach-w90x900/mfp-w90p910.c
 create mode 100644 arch/arm/mach-w90x900/mfp.c
 create mode 100644 arch/arm/mach-w90x900/nuc910.c
 create mode 100644 arch/arm/mach-w90x900/nuc910.h
 delete mode 100644 arch/arm/mach-w90x900/w90p910.c

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 3ccd625455c..e38aa328e60 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-obj-y				+= clksel.o
+obj-y				:= irq.o time.o mfp.o gpio.o clock.o
+obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
-obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
+obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 
 # machine support
 
-obj-$(CONFIG_MACH_W90P910EVB)	+= mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
index 5a77eb91cb1..3de4a5211c3 100644
--- a/arch/arm/mach-w90x900/clksel.c
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -42,13 +42,13 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 
 	clksel = __raw_readl(REG_CLKSEL);
 
-	if (strcmp(dev_id, "w90p910-ms") == 0)
+	if (strcmp(dev_id, "nuc900-ms") == 0)
 		offset = MSOFFSET;
-	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
 		offset = ATAOFFSET;
-	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+	else if (strcmp(dev_id, "nuc900-lcd") == 0)
 		offset = LCDOFFSET;
-	else if (strcmp(dev_id, "w90p910-audio") == 0)
+	else if (strcmp(dev_id, "nuc900-audio") == 0)
 		offset = AUDOFFSET;
 	else
 		offset = CPUOFFSET;
@@ -59,7 +59,7 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 	__raw_writel(clksel, REG_CLKSEL);
 }
 
-void w90p910_clock_source(struct device *dev, unsigned char *src)
+void nuc900_clock_source(struct device *dev, unsigned char *src)
 {
 	unsigned int clkval;
 	const char *dev_id;
@@ -87,5 +87,5 @@ void w90p910_clock_source(struct device *dev, unsigned char *src)
 
 	mutex_unlock(&clksel_sem);
 }
-EXPORT_SYMBOL(w90p910_clock_source);
+EXPORT_SYMBOL(nuc900_clock_source);
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 70b67109637..b785994bab0 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -61,7 +61,7 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-void w90x900_clk_enable(struct clk *clk, int enable)
+void nuc900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
@@ -76,7 +76,7 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
-void w90x900_subclk_enable(struct clk *clk, int enable)
+void nuc900_subclk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index d2f0e50a70b..f5816a06eed 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,8 +12,8 @@
 
 #include <asm/clkdev.h>
 
-void w90x900_clk_enable(struct clk *clk, int enable);
-void w90x900_subclk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -24,13 +24,13 @@ struct clk {
 
 #define DEFINE_CLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_clk_enable,		\
+		.enable	= nuc900_clk_enable,		\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
 #define DEFINE_SUBCLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_subclk_enable,	\
+		.enable	= nuc900_subclk_enable,	\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
new file mode 100644
index 00000000000..921cef991bf
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-w90x900/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC900 series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc900_iodesc[] __initdata = {
+	IODESC_ENT(IRQ),
+	IODESC_ENT(GCR),
+	IODESC_ENT(UART),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(EBI),
+};
+
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc900_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+	DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+	DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc900_uart_data[] = {
+	NUC900_8250PORT(UART0),
+};
+
+struct platform_device nuc900_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= nuc900_uart_data,
+	},
+};
+
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init nuc900_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	nuc900_clock_source(NULL, "ext");
+
+	nuc900_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	nuc900_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", nuc900_set_cpufreq);
+
+/*Init NUC900 evb io*/
+
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	unsigned long idcode = 0x0;
+
+	iotable_init(mach_desc, mach_size);
+	iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+	idcode = __raw_readl(NUC900PDID);
+	if (idcode == NUC910_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+	else if (idcode == NUC920_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+	else if (idcode == NUC950_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+	else if (idcode == NUC960_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
+}
+
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
+{
+	clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index ddde959d898..4d58ba164e2 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
  * Copyright (c) 2008 Nuvoton technology corporation
  * All rights reserved.
  *
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -24,30 +24,7 @@
        .type    = MT_DEVICE,                           \
 }
 
-/*Cpu identifier register*/
-
-#define W90X900PDID	W90X900_VA_GCR
-#define W90P910_CPUID	0x02900910
-#define W90P920_CPUID	0x02900920
-#define W90P950_CPUID	0x02900950
-#define W90N960_CPUID	0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-extern void w90p910_clock_source(struct device *dev, unsigned char *src);
-
-#define W90X900_8250PORT(name)					\
+#define NUC900_8250PORT(name)					\
 {								\
 	.membase	= name##_BA,				\
 	.mapbase	= name##_PA,				\
@@ -57,3 +34,26 @@ extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 	.iotype		= UPIO_MEM,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
 }
+
+/*Cpu identifier register*/
+
+#define NUC900PDID	W90X900_VA_GCR
+#define NUC910_CPUID	0x02900910
+#define NUC920_CPUID	0x02900920
+#define NUC950_CPUID	0x02900950
+#define NUC960_CPUID	0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 00000000000..2a6f98de48d
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE	0xA0000000
+#define NUC900_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+	{
+		.name	=	"NOR Partition 1 for kernel (960K)",
+		.size	=	0xF0000,
+		.offset	=	0x10000,
+	},
+	{
+		.name	=	"NOR Partition 2 for image (1M)",
+		.size	=	0x100000,
+		.offset	=	0x100000,
+	},
+	{
+		.name	=	"NOR Partition 3 for user (2M)",
+		.size	=	0x200000,
+		.offset	=	0x00200000,
+	}
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+	.width		=	2,
+	.parts		=	nuc900_flash_partitions,
+	.nr_parts	=	ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+	{
+		.start	=	NUC900_FLASH_BASE,
+		.end	=	NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+		.flags	=	IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nuc900_flash_device = {
+	.name		=	"physmap-flash",
+	.id		=	0,
+	.dev		= {
+				.platform_data = &nuc900_flash_data,
+			},
+	.resource	=	nuc900_flash_resources,
+	.num_resources	=	ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+	.name		  = "nuc900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ehci_resource),
+	.resource	  = nuc900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+	.name		  = "nuc900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ohci_resource),
+	.resource	  = nuc900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+	.name		= "nuc900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_usbgadget_resource),
+	.resource	= nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+	.name		= "nuc900-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_emc_resource),
+	.resource	= nuc900_emc_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_spi = {
+	.name		= "nuc900-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
+	.resource	= nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  nuc900_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &nuc900_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_wdt = {
+	.name		= "nuc900-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_wdt_resource),
+	.resource	= nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_rtc = {
+	.name		= "nuc900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_rtc_resource),
+	.resource	= nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_ts = {
+	.name		= "nuc900-ts",
+	.id		= -1,
+	.resource	= nuc900_ts_resource,
+	.num_resources	= ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device nuc900_device_fmi = {
+	.name		= "nuc900-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_fmi_resource),
+	.resource	= nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device nuc900_device_kpi = {
+	.name		= "nuc900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
+	.resource	= nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+	&nuc900_serial_device,
+	&nuc900_flash_device,
+	&nuc900_device_usb_ehci,
+	&nuc900_device_usb_ohci,
+	&nuc900_device_usbgadget,
+	&nuc900_device_emc,
+	&nuc900_device_spi,
+	&nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+	platform_add_devices(device, size);
+	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+	spi_register_board_info(nuc900_spi_board_info,
+					ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0dfa182..ba05aec7ea4 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
 /*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
  *
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
  *
  *  Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -30,31 +30,31 @@
 #define GPIO_IN			(0x0C)
 #define GROUPINERV		(0x10)
 #define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
 
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.direction_input  = w90p910_dir_input,		\
-			.direction_output = w90p910_dir_output,		\
-			.get		  = w90p910_gpio_get,		\
-			.set		  = w90p910_gpio_set,		\
+			.direction_input  = nuc900_dir_input,		\
+			.direction_output = nuc900_dir_output,		\
+			.get		  = nuc900_gpio_get,		\
+			.set		  = nuc900_gpio_set,		\
 			.base		  = base_gpio,			\
 			.ngpio		  = nr_gpio,			\
 		}							\
 	}
 
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
 	struct gpio_chip	chip;
 	void __iomem		*regbase;	/* Base of group register*/
 	spinlock_t 		gpio_lock;
 };
 
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
 	unsigned int regval;
 
 	regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return (regval != 0);
 }
 
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 }
 
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval &= ~GPIO_GPIO(offset);
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, outreg);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static struct w90p910_gpio_chip w90p910_gpio[] = {
-	W90P910_GPIO_CHIP("GROUPC", 0, 16),
-	W90P910_GPIO_CHIP("GROUPD", 16, 10),
-	W90P910_GPIO_CHIP("GROUPE", 26, 14),
-	W90P910_GPIO_CHIP("GROUPF", 40, 10),
-	W90P910_GPIO_CHIP("GROUPG", 50, 17),
-	W90P910_GPIO_CHIP("GROUPH", 67, 8),
-	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+	NUC900_GPIO_CHIP("GROUPC", 0, 16),
+	NUC900_GPIO_CHIP("GROUPD", 16, 10),
+	NUC900_GPIO_CHIP("GROUPE", 26, 14),
+	NUC900_GPIO_CHIP("GROUPF", 40, 10),
+	NUC900_GPIO_CHIP("GROUPG", 50, 17),
+	NUC900_GPIO_CHIP("GROUPH", 67, 8),
+	NUC900_GPIO_CHIP("GROUPI", 75, 17),
 };
 
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
 {
 	unsigned	i;
-	struct w90p910_gpio_chip *gpio_chip;
+	struct nuc900_gpio_chip *gpio_chip;
 
 	for (i = 0; i < nr_group; i++) {
-		gpio_chip = &w90p910_gpio[i];
+		gpio_chip = &nuc900_gpio[i];
 		spin_lock_init(&gpio_chip->gpio_lock);
 		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
 		gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index a296c9b81d2..0ce9d8e867e 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -36,13 +36,13 @@ struct group_irq {
 
 static DEFINE_SPINLOCK(groupirq_lock);
 
-#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
-struct group_irq group_##_name = {				\
-		.enable		= w90x900_group_enable,		\
-		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+#define DEFINE_GROUP(_name, _ctrlbit, _num)				\
+struct group_irq group_##_name = {					\
+		.enable		= nuc900_group_enable,			\
+		.gpen		= ((1 << _num) - 1) << _ctrlbit,	\
 	}
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
 
 static DEFINE_GROUP(nirq0, 0, 4);
 static DEFINE_GROUP(nirq1, 4, 4);
@@ -77,7 +77,7 @@ static void group_irq_disable(struct group_irq *group_irq)
 	spin_unlock_irqrestore(&groupirq_lock, flags);
 }
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
 {
 	unsigned int groupen = gpirq->gpen;
 	unsigned long regval;
@@ -92,7 +92,7 @@ static void w90x900_group_enable(struct group_irq *gpirq, int enable)
 	__raw_writel(regval, REG_AIC_GEN);
 }
 
-static void w90x900_irq_mask(unsigned int irq)
+static void nuc900_irq_mask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -143,12 +143,12 @@ static void w90x900_irq_mask(unsigned int irq)
  * to REG_AIC_EOSCR for ACK
  */
 
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
 {
 	__raw_writel(0x01, REG_AIC_EOSCR);
 }
 
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -194,20 +194,20 @@ static void w90x900_irq_unmask(unsigned int irq)
 		group_irq_enable(group_irq);
 }
 
-static struct irq_chip w90x900_irq_chip = {
-	.ack	   = w90x900_irq_ack,
-	.mask	   = w90x900_irq_mask,
-	.unmask	   = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+	.ack	   = nuc900_irq_ack,
+	.mask	   = nuc900_irq_mask,
+	.unmask	   = nuc900_irq_unmask,
 };
 
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
 {
 	int irqno;
 
 	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
 
 	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
-		set_irq_chip(irqno, &w90x900_irq_chip);
+		set_irq_chip(irqno, &nuc900_irq_chip);
 		set_irq_handler(irqno, handle_level_irq);
 		set_irq_flags(irqno, IRQF_VALID);
 	}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 00000000000..ec05bda946f
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+	nuc910_map_io();
+	nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+	nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc910evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc910evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 117578aed68..00000000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE	0xA0000000
-#define W90P910_FLASH_SIZE	0x400000
-#define SPIOFFSET		0x200
-#define SPIOREG_SIZE		0x100
-
-static struct mtd_partition w90p910_flash_partitions[] = {
-	{
-		.name	=	"NOR Partition 1 for kernel (960K)",
-		.size	=	0xF0000,
-		.offset	=	0x10000,
-	},
-	{
-		.name	=	"NOR Partition 2 for image (1M)",
-		.size	=	0x100000,
-		.offset	=	0x100000,
-	},
-	{
-		.name	=	"NOR Partition 3 for user (2M)",
-		.size	=	0x200000,
-		.offset	=	0x00200000,
-	}
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
-	.width		=	2,
-	.parts		=	w90p910_flash_partitions,
-	.nr_parts	=	ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
-	{
-		.start	=	W90P910_FLASH_BASE,
-		.end	=	W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
-		.flags	=	IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device w90p910_flash_device = {
-	.name		=	"physmap-flash",
-	.id		=	0,
-	.dev		= {
-				.platform_data = &w90p910_flash_data,
-			},
-	.resource	=	w90p910_flash_resources,
-	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBEHCIHOST,
-		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
-	.name		  = "w90x900-ehci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
-	.resource	  = w90x900_usb_ehci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ehci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBOHCIHOST,
-		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
-	.name		  = "w90x900-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
-	.resource	  = w90x900_usb_ohci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ohci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
-	[0] = {
-		.start = W90X900_PA_ADC,
-		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_ts = {
-	.name		= "w90x900-ts",
-	.id		= -1,
-	.resource	= w90x900_ts_resource,
-	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_RTC,
-		.end   = W90X900_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_rtc = {
-	.name		= "w90x900-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
-	.resource	= w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_KPI,
-		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_KPI,
-		.end   = IRQ_KPI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device w90x900_device_kpi = {
-	.name		= "w90x900-kpi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
-	.resource	= w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBDEV,
-		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device w90x900_device_usbgadget = {
-	.name		= "w90x900-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
-	.resource	= w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-/* FMI Device */
-
-static struct resource w90p910_fmi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_FMI,
-		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_FMI,
-		.end   = IRQ_FMI,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_fmi = {
-	.name		= "w90p910-fmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
-	.resource	= w90p910_fmi_resource,
-};
-
-/* MAC device */
-
-static struct resource w90x900_emc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_EMC,
-		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_EMCTX,
-		.end   = IRQ_EMCTX,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_EMCRX,
-		.end   = IRQ_EMCRX,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
-static struct platform_device w90p910_device_emc = {
-	.name		= "w90p910-emc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
-	.resource	= w90x900_emc_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_emc_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-/* SPI device */
-
-static struct resource w90p910_spi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_I2C + SPIOFFSET,
-		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SSP,
-		.end   = IRQ_SSP,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_spi = {
-	.name		= "w90p910-spi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
-	.resource	= w90p910_spi_resource,
-};
-
-/* spi device, spi flash info */
-
-static struct mtd_partition w90p910_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x0100000,
-		.offset = 0,
-	},
-};
-
-static struct flash_platform_data w90p910_spi_flash_data = {
-	.name = "m25p80",
-	.parts =  w90p910_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
-	.type = "w25x16",
-};
-
-static struct spi_board_info w90p910_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &w90p910_spi_flash_data,
-		.mode = SPI_MODE_0,
-	},
-};
-
-/* WDT Device */
-
-static struct resource w90p910_wdt_resource[] = {
-	[0] = {
-		.start = W90X900_PA_TIMER,
-		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_wdt = {
-	.name		= "w90p910-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
-	.resource	= w90p910_wdt_resource,
-};
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
-	&w90p910_serial_device,
-	&w90p910_flash_device,
-	&w90x900_device_usb_ehci,
-	&w90x900_device_usb_ohci,
-	&w90x900_device_ts,
-	&w90x900_device_rtc,
-	&w90x900_device_kpi,
-	&w90x900_device_usbgadget,
-	&w90p910_device_fmi,
-	&w90p910_device_emc,
-	&w90p910_device_spi,
-	&w90p910_device_wdt,
-};
-
-static void __init w90p910evb_map_io(void)
-{
-	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
-	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-	spi_register_board_info(w90p910_spi_board_info,
-					ARRAY_SIZE(w90p910_spi_board_info));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
-	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= 0,
-	.map_io		= w90p910evb_map_io,
-	.init_irq	= w90x900_init_irq,
-	.init_machine	= w90p910evb_init,
-	.timer		= &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
deleted file mode 100644
index 4533098a0ee..00000000000
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
-
-#define GPSELF		(0x01 << 1)
-
-#define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
-
-#define GPSELEI0	(0x01 << 26)
-#define GPSELEI1	(0x01 << 27)
-
-#define GPIOG0TO1	(0x03 << 14)
-#define GPIOG2TO3	(0x03 << 16)
-#define ENSPI		(0x0a << 14)
-#define ENI2C0		(0x01 << 14)
-#define ENI2C1		(0x01 << 16)
-
-static DEFINE_MUTEX(mfp_mutex);
-
-void mfp_set_groupf(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-emc") == 0)
-		mfpen |= GPSELF;/*enable mac*/
-	else
-		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-lcd") == 0)
-		mfpen |= GPSELC;/*enable lcd*/
-	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
-			mfpen &= (~GPSELC);/*enable kpi*/
-			mfpen |= ENKPI;
-		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
-				mfpen &= (~GPSELC);/*enable nand*/
-				mfpen |= ENNAND;
-			} else
-				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	mfpen &= ~GPSELEI1;/*default gpio16*/
-
-	if (strcmp(dev_id, "w90p910-wdog") == 0)
-		mfpen |= GPSELEI1;/*enable wdog*/
-		else if (strcmp(dev_id, "w90p910-atapi") == 0)
-			mfpen |= GPSELEI0;/*enable atapi*/
-			else if (strcmp(dev_id, "w90p910-keypad") == 0)
-				mfpen &= ~GPSELEI0;/*enable keypad*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
-void mfp_set_groupg(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-spi") == 0) {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
-		mfpen |= ENSPI;/*enable spi*/
-	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
-		mfpen &= ~(GPIOG0TO1);
-		mfpen |= ENI2C0;/*enable i2c0*/
-	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
-		mfpen &= ~(GPIOG2TO3);
-		mfpen |= ENI2C1;/*enable i2c1*/
-	} else {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
-	}
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupg);
-
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
new file mode 100644
index 00000000000..a47dc9a708e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
+static DEFINE_MUTEX(mfp_mutex);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+		mfpen &= (~GPSELC);/*enable kpi*/
+		mfpen |= ENKPI;
+	} else if (strcmp(dev_id, "nuc900-nand") == 0) {
+		mfpen &= (~GPSELC);/*enable nand*/
+		mfpen |= ENNAND;
+	} else
+		mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
+	if (strcmp(dev_id, "nuc900-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
+		mfpen |= GPSELEI0;/*enable atapi*/
+	else if (strcmp(dev_id, "nuc900-keypad") == 0)
+		mfpen &= ~GPSELEI0;/*enable keypad*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 00000000000..656f03b3b62
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+	&nuc900_device_ts,
+	&nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
+	IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+	nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+	nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 00000000000..83e9ba5fc26
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 5e06770e601..4128af870b4 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -44,7 +44,7 @@
 
 unsigned int timer0_load;
 
-static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -71,7 +71,7 @@ static void w90p910_clockevent_setmode(enum clock_event_mode mode,
 	__raw_writel(val, REG_TCSR0);
 }
 
-static int w90p910_clockevent_setnextevent(unsigned long evt,
+static int nuc900_clockevent_setnextevent(unsigned long evt,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -85,20 +85,20 @@ static int w90p910_clockevent_setnextevent(unsigned long evt,
 	return 0;
 }
 
-static struct clock_event_device w90p910_clockevent_device = {
-	.name		= "w90p910-timer0",
+static struct clock_event_device nuc900_clockevent_device = {
+	.name		= "nuc900-timer0",
 	.shift		= 32,
 	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= w90p910_clockevent_setmode,
-	.set_next_event	= w90p910_clockevent_setnextevent,
+	.set_mode	= nuc900_clockevent_setmode,
+	.set_next_event	= nuc900_clockevent_setnextevent,
 	.rating		= 300,
 };
 
 /*IRQ handler for the timer*/
 
-static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &w90p910_clockevent_device;
+	struct clock_event_device *evt = &nuc900_clockevent_device;
 
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
 
@@ -106,40 +106,40 @@ static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90p910_timer0_irq = {
-	.name		= "w90p910-timer0",
+static struct irqaction nuc900_timer0_irq = {
+	.name		= "nuc900-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90p910_timer0_interrupt,
+	.handler	= nuc900_timer0_interrupt,
 };
 
-static void __init w90p910_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(unsigned int rate)
 {
-	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-					w90p910_clockevent_device.shift);
-	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&w90p910_clockevent_device);
+	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					nuc900_clockevent_device.shift);
+	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&nuc900_clockevent_device);
 }
 
-static cycle_t w90p910_get_cycles(struct clocksource *cs)
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
 	return ~__raw_readl(REG_TDR1);
 }
 
-static struct clocksource clocksource_w90p910 = {
-	.name	= "w90p910-timer1",
+static struct clocksource clocksource_nuc900 = {
+	.name	= "nuc900-timer1",
 	.rating	= 200,
-	.read	= w90p910_get_cycles,
+	.read	= nuc900_get_cycles,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.shift	= 20,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init w90p910_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(unsigned int rate)
 {
 	unsigned int val;
 
@@ -149,12 +149,12 @@ static void __init w90p910_clocksource_init(unsigned int rate)
 	val |= (COUNTEN | PERIOD);
 	__raw_writel(val, REG_TCSR1);
 
-	clocksource_w90p910.mult =
-		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
-	clocksource_register(&clocksource_w90p910);
+	clocksource_nuc900.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+	clocksource_register(&clocksource_nuc900);
 }
 
-static void __init w90p910_timer_init(void)
+static void __init nuc900_timer_init(void)
 {
 	struct clk *ck_ext = clk_get(NULL, "ext");
 	unsigned int	rate;
@@ -171,12 +171,12 @@ static void __init w90p910_timer_init(void)
 	__raw_writel(RESETINT, REG_TISR);
 	timer0_load = (rate / TICKS_PER_SEC);
 
-	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
 
-	w90p910_clocksource_init(rate);
-	w90p910_clockevents_init(rate);
+	nuc900_clocksource_init(rate);
+	nuc900_clockevents_init(rate);
 }
 
-struct sys_timer w90x900_timer = {
-	.init		= w90p910_timer_init,
+struct sys_timer nuc900_timer = {
+	.init		= nuc900_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
deleted file mode 100644
index d33723b69d1..00000000000
--- a/arch/arm/mach-w90x900/w90p910.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/w90p910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * W90P910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-	IODESC_ENT(IRQ),
-	IODESC_ENT(GCR),
-	IODESC_ENT(UART),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(EBI),
-	IODESC_ENT(USBEHCIHOST),
-	IODESC_ENT(USBOHCIHOST),
-	IODESC_ENT(ADC),
-	IODESC_ENT(RTC),
-	IODESC_ENT(KPI),
-	IODESC_ENT(USBDEV),
-	/*IODESC_ENT(LCD),*/
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_SUBCLK(ms, 0);
-static DEFINE_SUBCLK(sd, 1);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_SUBCLK(rmii, 2);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-static DEFINE_CLK(ext, 0);
-
-static struct clk_lookup w90p910_clkregs[] = {
-	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
-	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
-	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
-	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
-	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
-	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
-	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
-	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
-	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
-	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
-	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
-	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
-	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
-	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
-	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
-	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
-	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port w90p910_uart_data[] = {
-	W90X900_8250PORT(UART0),
-};
-
-struct platform_device w90p910_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= w90p910_uart_data,
-	},
-};
-
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
-	unsigned long idcode = 0x0;
-
-	iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
-	idcode = __raw_readl(W90X900PDID);
-	if (idcode != W90P910_CPUID)
-		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Set W90P910 cpu frequence*/
-static int __init w90p910_set_clkval(unsigned int cpufreq)
-{
-	unsigned int pllclk, ahbclk, apbclk, val;
-
-	pllclk = 0;
-	ahbclk = 0;
-	apbclk = 0;
-
-	switch (cpufreq) {
-	case 66:
-		pllclk = PLL_66MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 100:
-		pllclk = PLL_100MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 120:
-		pllclk = PLL_120MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 166:
-		pllclk = PLL_166MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 200:
-		pllclk = PLL_200MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-	}
-
-	__raw_writel(pllclk, REG_PLLCON0);
-
-	val = __raw_readl(REG_CLKDIV);
-	val &= ~(0x03 << 24 | 0x03 << 26);
-	val |= (ahbclk << 24 | apbclk << 26);
-	__raw_writel(val, REG_CLKDIV);
-
-	return 	0;
-}
-static int __init w90p910_set_cpufreq(char *str)
-{
-	unsigned long cpufreq, val;
-
-	if (!*str)
-		return 0;
-
-	strict_strtoul(str, 0, &cpufreq);
-
-	w90p910_clock_source(NULL, "ext");
-
-	w90p910_set_clkval(cpufreq);
-
-	mdelay(1);
-
-	val = __raw_readl(REG_CKSKEW);
-	val &= ~0xff;
-	val |= DEFAULTSKEW;
-	__raw_writel(val, REG_CKSKEW);
-
-	w90p910_clock_source(NULL, "pll0");
-
-	return 1;
-}
-
-__setup("cpufreq=", w90p910_set_cpufreq);
-
-/*Init W90P910 clock*/
-
-void __init w90p910_init_clocks(void)
-{
-	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
-
-static int __init w90p910_init_cpu(void)
-{
-	return 0;
-}
-
-static int __init w90x900_arch_init(void)
-{
-	return w90p910_init_cpu();
-}
-arch_initcall(w90x900_arch_init);
-- 
cgit v1.2.3


From 936fbe9efc96d40c8cdc23bba31a3beaad4f96c1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:08:24 +0100
Subject: ARM: 5683/1: Add nuc950 platform to w90x900

Add nuc950 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 ++++++++++
 arch/arm/mach-w90x900/Makefile         |  2 ++
 arch/arm/mach-w90x900/mach-nuc950evb.c | 44 +++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.c         | 54 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.h         | 28 ++++++++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc950evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178fe5ec..163b8010e57 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,11 @@ config CPU_W90P910
 	help
 	  Support for W90P910 of Nuvoton W90X900 CPUs.
 
+config CPU_NUC950
+	bool
+	help
+	  Support for NUCP950 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -16,4 +21,14 @@ config MACH_W90P910EVB
 
 endmenu
 
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+	bool "Nuvoton NUC950 Evaluation Board"
+	select CPU_NUC950
+	help
+	   Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index e38aa328e60..a4622b577a2 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -9,7 +9,9 @@ obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
+obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 00000000000..cef903bcccd
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+	nuc950_map_io();
+	nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+	nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc950evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc950evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 00000000000..149508116d1
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+	nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+	nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 00000000000..98a1148bc5a
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
-- 
cgit v1.2.3


From 8e22676e56673494a15ba95b57af21eb47d8b98a Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:09:03 +0100
Subject: ARM: 5684/1: Add nuc960 platform to w90x900

Add nuc960 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 ++++++++++
 arch/arm/mach-w90x900/Makefile         |  2 ++
 arch/arm/mach-w90x900/mach-nuc960evb.c | 44 +++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.c         | 54 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.h         | 28 ++++++++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc960evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 163b8010e57..69bab32a8bc 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -10,6 +10,11 @@ config CPU_NUC950
 	help
 	  Support for NUCP950 of Nuvoton NUC900 CPUs.
 
+config CPU_NUC960
+	bool
+	help
+	  Support for NUCP960 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -31,4 +36,14 @@ config MACH_W90P950EVB
 
 endmenu
 
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+	bool "Nuvoton NUC960 Evaluation Board"
+	select CPU_NUC960
+	help
+	   Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index a4622b577a2..828c0326441 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -10,8 +10,10 @@ obj-y				+= clksel.o dev.o cpu.o
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
+obj-$(CONFIG_CPU_NUC960)	+= nuc960.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
 obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB)	+= mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 00000000000..e3a46f19f2b
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+	nuc960_map_io();
+	nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+	nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc960evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc960evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 00000000000..8851a3a27ce
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+	nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+	nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 00000000000..f0c07cbe3a8
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
-- 
cgit v1.2.3


From 13f96d8f4c5a3f6a6b5e578d08869d79d690e0b2 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 1 Sep 2009 22:01:27 +0100
Subject: ARM: 5687/1: fix an oops with highmem

In xdr_partial_copy_from_skb() there is that sequence:

		kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA);
		[...]
		flush_dcache_page(*ppage);
		kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA);

Mixing flush_dcache_page() and kmap_atomic() is a bit odd,
especially since kunmap_atomic() must deal with cache issues
already.  OTOH the non-highmem case must use flush_dcache_page()
as kunmap_atomic() becomes a no op with no cache maintenance.

Problem is that with highmem the implementation of kmap_atomic()
doesn't set page->virtual, and page_address(page) returns 0 in
that case. Here flush_dcache_page() calls __flush_dcache_page()
which calls __cpuc_flush_dcache_page(page_address(page)) resulting
in a kernel oops.

None of the kmap_atomic() implementations uses set_page_address().
Hence we can assume page_address() is always expected to return 0 in
that case. Let's conditionally call __cpuc_flush_dcache_page() only
when the page address is non zero, and perform that test only when
highmem is configured.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/flush.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c07222eb5ce..575f3ad722e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -144,7 +144,14 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 * page.  This ensures that data in the physical page is mutually
 	 * coherent with the kernels mapping.
 	 */
-	__cpuc_flush_dcache_page(page_address(page));
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * kmap_atomic() doesn't set the page virtual address, and
+	 * kunmap_atomic() takes care of cache flushing already.
+	 */
+	if (page_address(page))
+#endif
+		__cpuc_flush_dcache_page(page_address(page));
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
-- 
cgit v1.2.3


From d0420c83f39f79afb82010c2d2cafd150eef651b Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 2 Sep 2009 09:14:16 +0100
Subject: KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]

Implement TIF_NOTIFY_RESUME for most of those architectures in which isn't yet
available, and, whilst we're at it, have it call the appropriate tracehook.

After this patch, blackfin, m68k* and xtensa still lack support and need
alteration of assembly code to make it work.

Resume notification can then be used (by a later patch) to install a new
session keyring on the parent of a process.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

cc: linux-arch@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/alpha/include/asm/thread_info.h  | 5 ++++-
 arch/alpha/kernel/signal.c            | 5 +++++
 arch/arm/include/asm/thread_info.h    | 3 +++
 arch/arm/kernel/entry-common.S        | 2 +-
 arch/arm/kernel/signal.c              | 5 +++++
 arch/avr32/include/asm/thread_info.h  | 6 +++++-
 arch/avr32/kernel/entry-avr32b.S      | 2 +-
 arch/avr32/kernel/signal.c            | 5 +++++
 arch/cris/kernel/ptrace.c             | 5 +++++
 arch/h8300/include/asm/thread_info.h  | 2 ++
 arch/h8300/kernel/signal.c            | 5 +++++
 arch/m32r/include/asm/thread_info.h   | 2 ++
 arch/m32r/kernel/signal.c             | 5 +++++
 arch/mips/include/asm/thread_info.h   | 2 ++
 arch/mips/kernel/signal.c             | 5 +++++
 arch/parisc/include/asm/thread_info.h | 4 +++-
 arch/parisc/kernel/entry.S            | 2 +-
 arch/parisc/kernel/signal.c           | 5 +++++
 18 files changed, 64 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 60c83abfde7..5076a8860b1 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -75,6 +75,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_UAC_SIGBUS		7
 #define TIF_MEMDIE		8
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
+#define TIF_NOTIFY_RESUME	10	/* callback before returning to user */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -82,10 +83,12 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 /* Work to do on interrupt/exception return.  */
-#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+				 _TIF_NOTIFY_RESUME)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index df65eaa84c4..04e17c1f0f1 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -683,4 +683,9 @@ do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
 {
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs, sw, r0, r19);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e50cbc..d3a39b1e6c0 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -130,11 +130,13 @@ extern void vfp_sync_state(struct thread_info *thread);
  *  TIF_SYSCALL_TRACE	- syscall trace active
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_NOTIFY_RESUME	- callback before returning to user
  *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
  *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
  */
 #define TIF_SIGPENDING		0
 #define TIF_NEED_RESCHED	1
+#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
@@ -143,6 +145,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 8c3de1a350b..7813ab782fd 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -51,7 +51,7 @@ fast_work_pending:
 work_pending:
 	tst	r1, #_TIF_NEED_RESCHED
 	bne	work_resched
-	tst	r1, #_TIF_SIGPENDING
+	tst	r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
 	beq	no_work_pending
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index f6bc5d44278..13dec276927 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -707,4 +707,9 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
 		do_signal(&current->blocked, regs, syscall);
+
+	if (thread_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index fc42de5ca20..fd0c5d7e933 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -84,6 +84,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		6
 #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
 #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
+#define TIF_NOTIFY_RESUME	9	/* callback before returning to user */
 #define TIF_FREEZE		29
 #define TIF_DEBUG		30	/* debugging enabled */
 #define TIF_USERSPACE		31      /* true if FS sets userspace */
@@ -96,6 +97,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 /* Note: The masks below must never span more than 16 bits! */
@@ -103,13 +105,15 @@ static inline struct thread_info *current_thread_info(void)
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK				\
 	((1 << TIF_SIGPENDING)			\
+	 | _TIF_NOTIFY_RESUME			\
 	 | (1 << TIF_NEED_RESCHED)		\
 	 | (1 << TIF_POLLING_NRFLAG)		\
 	 | (1 << TIF_BREAKPOINT)		\
 	 | (1 << TIF_RESTORE_SIGMASK))
 
 /* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE) | \
+				 _TIF_NOTIFY_RESUME)
 /* work to do on return from debug mode */
 #define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
 
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 009a80155d6..169268c40ae 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -281,7 +281,7 @@ syscall_exit_work:
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
 
-2:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
+2:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NOTIFY_RESUME
 	tst	r1, r2
 	breq	3f
 	unmask_interrupts
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 27227561bad..62d242e2d03 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -322,4 +322,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti)
 
 	if (ti->flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs, &current->blocked, syscall);
+
+	if (ti->flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index b326023baab..4f06d7fb43d 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -36,4 +36,9 @@ void do_notify_resume(int canrestart, struct pt_regs *regs,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(canrestart,regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 8bbc8b0ee45..70e67e47d02 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -89,6 +89,7 @@ static inline struct thread_info *current_thread_info(void)
 					   TIF_NEED_RESCHED */
 #define TIF_MEMDIE		4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_NOTIFY_RESUME	6	/* callback before returning to user */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 /* as above, but as bit values */
@@ -97,6 +98,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index cf3472f7389..56b3ab7dbbb 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -552,4 +552,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 {
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs, NULL);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 07bb5bd00e2..71578151a40 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -149,6 +149,7 @@ static inline unsigned int get_thread_fault_code(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_SINGLESTEP		3	/* restore singlestep on return to user mode */
 #define TIF_IRET		4	/* return with iret */
+#define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
 #define TIF_RESTORE_SIGMASK	8	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
@@ -160,6 +161,7 @@ static inline unsigned int get_thread_fault_code(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
 #define _TIF_IRET		(1<<TIF_IRET)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index 18124542a6e..3220258be18 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -408,5 +408,10 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs,oldset);
 
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+
 	clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index f9df720d2e4..01cc1630b66 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -115,6 +115,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
 #define TIF_SECCOMP		4	/* secure computing */
+#define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
@@ -139,6 +140,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 830c5ef9932..a3d1015471d 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -700,4 +700,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 4ce0edfbe96..ac775a76bff 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -59,6 +59,7 @@ struct thread_info {
 #define TIF_MEMDIE		5
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
 #define TIF_FREEZE		7	/* is freezing for suspend */
+#define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
@@ -67,8 +68,9 @@ struct thread_info {
 #define _TIF_32BIT		(1 << TIF_32BIT)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 
-#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | \
+#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
                                  _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
 
 #endif /* __KERNEL__ */
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index e552e547cb9..8c4712b74dc 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -948,7 +948,7 @@ intr_check_sig:
 	/* As above */
 	mfctl   %cr30,%r1
 	LDREG	TI_FLAGS(%r1),%r19
-	ldi	(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %r20
+	ldi	(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NOTIFY_RESUME), %r20
 	and,COND(<>)	%r19, %r20, %r0
 	b,n	intr_restore	/* skip past if we've nothing to do */
 
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index f82544225e8..b3bfc432670 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -645,4 +645,9 @@ void do_notify_resume(struct pt_regs *regs, long in_syscall)
 	if (test_thread_flag(TIF_SIGPENDING) ||
 	    test_thread_flag(TIF_RESTORE_SIGMASK))
 		do_signal(regs, in_syscall);
+
+	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
-- 
cgit v1.2.3


From ee18d64c1f632043a02e6f5ba5e045bb26a5465f Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 2 Sep 2009 09:14:21 +0100
Subject: KEYS: Add a keyctl to install a process's session keyring on its
 parent [try #6]

Add a keyctl to install a process's session keyring onto its parent.  This
replaces the parent's session keyring.  Because the COW credential code does
not permit one process to change another process's credentials directly, the
change is deferred until userspace next starts executing again.  Normally this
will be after a wait*() syscall.

To support this, three new security hooks have been provided:
cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in
the blank security creds and key_session_to_parent() - which asks the LSM if
the process may replace its parent's session keyring.

The replacement may only happen if the process has the same ownership details
as its parent, and the process has LINK permission on the session keyring, and
the session keyring is owned by the process, and the LSM permits it.

Note that this requires alteration to each architecture's notify_resume path.
This has been done for all arches barring blackfin, m68k* and xtensa, all of
which need assembly alteration to support TIF_NOTIFY_RESUME.  This allows the
replacement to be performed at the point the parent process resumes userspace
execution.

This allows the userspace AFS pioctl emulation to fully emulate newpag() and
the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to
alter the parent process's PAG membership.  However, since kAFS doesn't use
PAGs per se, but rather dumps the keys into the session keyring, the session
keyring of the parent must be replaced if, for example, VIOCSETTOK is passed
the newpag flag.

This can be tested with the following program:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>

	#define KEYCTL_SESSION_TO_PARENT	18

	#define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0)

	int main(int argc, char **argv)
	{
		key_serial_t keyring, key;
		long ret;

		keyring = keyctl_join_session_keyring(argv[1]);
		OSERROR(keyring, "keyctl_join_session_keyring");

		key = add_key("user", "a", "b", 1, keyring);
		OSERROR(key, "add_key");

		ret = keyctl(KEYCTL_SESSION_TO_PARENT);
		OSERROR(ret, "KEYCTL_SESSION_TO_PARENT");

		return 0;
	}

Compiled and linked with -lkeyutils, you should see something like:

	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	355907932 --alswrv   4043    -1   \_ keyring: _uid.4043
	[dhowells@andromeda ~]$ /tmp/newpag
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	1055658746 --alswrv   4043  4043   \_ user: a
	[dhowells@andromeda ~]$ /tmp/newpag hello
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: hello
	340417692 --alswrv   4043  4043   \_ user: a

Where the test program creates a new session keyring, sticks a user key named
'a' into it and then installs it on its parent.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/alpha/kernel/signal.c    | 2 ++
 arch/arm/kernel/signal.c      | 2 ++
 arch/avr32/kernel/signal.c    | 2 ++
 arch/cris/kernel/ptrace.c     | 2 ++
 arch/frv/kernel/signal.c      | 2 ++
 arch/h8300/kernel/signal.c    | 2 ++
 arch/ia64/kernel/process.c    | 2 ++
 arch/m32r/kernel/signal.c     | 2 ++
 arch/mips/kernel/signal.c     | 2 ++
 arch/mn10300/kernel/signal.c  | 2 ++
 arch/parisc/kernel/signal.c   | 2 ++
 arch/s390/kernel/signal.c     | 2 ++
 arch/sh/kernel/signal_32.c    | 2 ++
 arch/sh/kernel/signal_64.c    | 2 ++
 arch/sparc/kernel/signal_32.c | 2 ++
 arch/sparc/kernel/signal_64.c | 3 +++
 arch/x86/kernel/signal.c      | 2 ++
 17 files changed, 35 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 04e17c1f0f1..d91aaa74705 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -687,5 +687,7 @@ do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 13dec276927..ea4ad3a43c8 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -711,5 +711,7 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 	if (thread_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 62d242e2d03..de9f7fe2aef 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -326,5 +326,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti)
 	if (ti->flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index 4f06d7fb43d..32e9d5ee895 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -40,5 +40,7 @@ void do_notify_resume(int canrestart, struct pt_regs *regs,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 4a7a62c6e78..6b0a2b6fed6 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -572,6 +572,8 @@ asmlinkage void do_notify_resume(__u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(__frame);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 } /* end do_notify_resume() */
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index 56b3ab7dbbb..abac3ee8c52 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -556,5 +556,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 5d7c0e5b9e7..89969e95004 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -192,6 +192,8 @@ do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(&scr->pt);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 	/* copy user rbs to kernel rbs */
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index 3220258be18..f80bac17c65 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -411,6 +411,8 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 	clear_thread_flag(TIF_IRET);
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index a3d1015471d..c2acf31874a 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -704,5 +704,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index feb2f2e810d..a21f43bc68e 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -568,5 +568,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(__frame);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index b3bfc432670..5ca1c02b805 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -649,5 +649,7 @@ void do_notify_resume(struct pt_regs *regs, long in_syscall)
 	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 062bd64e65f..6b4fef877f9 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -536,4 +536,6 @@ void do_notify_resume(struct pt_regs *regs)
 {
 	clear_thread_flag(TIF_NOTIFY_RESUME);
 	tracehook_notify_resume(regs);
+	if (current->replacement_session_keyring)
+		key_replace_session_keyring();
 }
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index b5afbec1db5..04a21883f32 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -640,5 +640,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 0663a0ee602..9e5c9b1d7e9 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -772,5 +772,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 181d069a2d4..7ce1a1005b1 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -590,6 +590,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
 
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index ec82d76dc6f..647afbda7ae 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -613,5 +613,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
+
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 4c578751e94..81e58238c4c 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -869,6 +869,8 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 #ifdef CONFIG_X86_32
-- 
cgit v1.2.3


From f2486f26692433ba27cc10991a085b503b0422a3 Mon Sep 17 00:00:00 2001
From: "Luck, Tony" <tony.luck@intel.com>
Date: Mon, 31 Aug 2009 16:54:03 -0700
Subject: [IA64] Fix warning in dma-mapping.c

arch/ia64/kernel/dma-mapping.c:14: warning: control reaches end of non-void function
arch/ia64/kernel/dma-mapping.c:14: warning: no return statement in function returning non-void

This warning was introduced by commit: 390bd132b2831a2ad0268e84bffbfc0680debfe5
	Add dma_debug_init() for ia64

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/dma-mapping.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 39a3cd0a417..f2c1600da09 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -10,7 +10,9 @@ EXPORT_SYMBOL(dma_ops);
 
 static int __init dma_init(void)
 {
-       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+	return 0;
 }
 fs_initcall(dma_init);
 
-- 
cgit v1.2.3


From 5afe18d2f58812f3924edbd215464e5e3e8545e7 Mon Sep 17 00:00:00 2001
From: Jiri Bohac <jbohac@suse.cz>
Date: Wed, 2 Sep 2009 11:00:46 +0200
Subject: [IA64] fix csum_ipv6_magic()

The 32-bit parameters (len and csum) of csum_ipv6_magic() are passed in 64-bit
registers in2 and in4. The high order 32 bits of the registers were never
cleared, and garbage was sometimes calculated into the checksum.

Fix this by clearing the high order 32 bits of these registers.

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/lib/ip_fast_csum.S | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/lib/ip_fast_csum.S b/arch/ia64/lib/ip_fast_csum.S
index 1f86aeb2c94..620d9dc5220 100644
--- a/arch/ia64/lib/ip_fast_csum.S
+++ b/arch/ia64/lib/ip_fast_csum.S
@@ -96,20 +96,22 @@ END(ip_fast_csum)
 GLOBAL_ENTRY(csum_ipv6_magic)
 	ld4	r20=[in0],4
 	ld4	r21=[in1],4
-	dep	r15=in3,in2,32,16
+	zxt4	in2=in2
 	;;
 	ld4	r22=[in0],4
 	ld4	r23=[in1],4
-	mux1	r15=r15,@rev
+	dep	r15=in3,in2,32,16
 	;;
 	ld4	r24=[in0],4
 	ld4	r25=[in1],4
-	shr.u	r15=r15,16
+	mux1	r15=r15,@rev
 	add	r16=r20,r21
 	add	r17=r22,r23
+	zxt4	in4=in4
 	;;
 	ld4	r26=[in0],4
 	ld4	r27=[in1],4
+	shr.u	r15=r15,16
 	add	r18=r24,r25
 	add	r8=r16,r17
 	;;
-- 
cgit v1.2.3


From 0e3eaadfe3da84f98250ad8a2c36e87fe00e42ee Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Sat, 22 Aug 2009 13:30:11 +0530
Subject: ARM: OMAP4: Fix NULL pointer dereference crash.

After the patch series "[PATCH 00/14] OMAP PM fixes for .31-rc"
merge in 2.6.31-rc5, the kernel crashed during boot on OMAP4430.
This patch fixes it by adding UART4 support and related code.
Without this patch omap_serial_init() would produce " NULL pointer
dereference" and kernel crashes in the bootup on OMAP4430 platform.

Some more info on the merge issue can be found here.
More info- http://lkml.org/lkml/2009/8/20/192

Note: While merging this patch,"IO_ADDRESS" needs to be changed
to "OMAP2_IO_ADDRESS" if the Tony's below series is already merged in.
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15072.html

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/serial.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index dd3c735b558..645546cbd26 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -113,6 +113,21 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 	}
 };
 
+#ifdef CONFIG_ARCH_OMAP4
+static struct plat_serial8250_port serial_platform_data3[] = {
+	{
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+		.flags		= 0
+	}
+};
+#endif
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
@@ -550,6 +565,17 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 			},
 		},
 	},
+#ifdef CONFIG_ARCH_OMAP4
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= 3
+			.dev			= {
+				.platform_data	= serial_platform_data3,
+			},
+		},
+	},
+#endif
 };
 
 void __init omap_serial_init(void)
-- 
cgit v1.2.3


From aae290fb4d64e2b09b659f4b8a7f9d2547ef63b1 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Sat, 22 Aug 2009 13:30:12 +0530
Subject: ARM: OMAP4: Bypass the clock check.

Second reason of OMAP4 boot failure on 2.6.31.rc6, the UART
platform data is not getting registered to kernel.
Registration was failing because of clock check failure in
omap_serial_init().
Below patch fix the same.

OMAP4 clock framework patches are still getting discussed on mailing
list so till then we need this.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/serial.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 645546cbd26..0f508109adc 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -609,8 +609,11 @@ void __init omap_serial_init(void)
 			uart->fck = NULL;
 		}
 
-		if (!uart->ick || !uart->fck)
-			continue;
+		/* FIXME: Remove this once the clkdev is ready */
+		if (!cpu_is_omap44xx()) {
+			if (!uart->ick || !uart->fck)
+				continue;
+		}
 
 		uart->num = i;
 		p->private_data = uart;
-- 
cgit v1.2.3


From 24bcadb6508b7c0f7307749228841fe04af6d70f Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 21 Aug 2009 13:11:06 -0500
Subject: OMAP: Zoom2: update serial platform_data id for external UART

Now that on-chip UARTs each have separate platform_data, the external
UART needs an non-conflicting ID.  Since there are 3 on-chip UARTs,
the Zoom2 external UART will be registered after as the fourth.

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index f546063775b..e0948c92298 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 
 static struct platform_device zoom2_debugboard_serial_device = {
 	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
+	.id			= 3,
 	.dev			= {
 		.platform_data	= serial_platform_data,
 	},
-- 
cgit v1.2.3


From bbde6ebae6dacf2f6e6ac4ab28c1805a2d51c5e1 Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Mon, 24 Aug 2009 17:36:37 +0530
Subject: MUSB: Remove usb_musb_pm_init() call

In usb_musb_pm_init, we attempt to access an MUSB register
when the i-clock may not be on, or the module is otherwise
not accessible.

We need to either:
- enable the clock before this access, or
- remove this code and move it to the bootloader, or
- enable the clock in the bootloader

If we enable the clock in the bootloader, we might as well
add the workaround in the bootloader itself. This code will
anyway be changed once hwmod is in place, so remove it for now

This allows us to boot the kernel on certain OMAP3 boards with
a bootloader that doesn't enable this clock. Without this, we
will need to upgrade the bootloaders on these boards.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/usb-musb.c | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 739e59e8025..1145a2562b0 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -31,15 +31,6 @@
 #include <mach/mux.h>
 #include <mach/usb.h>
 
-#define OTG_SYSCONFIG	(OMAP34XX_HSUSB_OTG_BASE + 0x404)
-
-static void __init usb_musb_pm_init(void)
-{
-	/* Ensure force-idle mode for OTG controller */
-	if (cpu_is_omap34xx())
-		omap_writel(0, OTG_SYSCONFIG);
-}
-
 #ifdef CONFIG_USB_MUSB_SOC
 
 static struct resource musb_resources[] = {
@@ -173,13 +164,10 @@ void __init usb_musb_init(void)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 		return;
 	}
-
-	usb_musb_pm_init();
 }
 
 #else
 void __init usb_musb_init(void)
 {
-	usb_musb_pm_init();
 }
 #endif /* CONFIG_USB_MUSB_SOC */
-- 
cgit v1.2.3


From 5110b2980a1299f6c253260de385b0dc2b2308b0 Mon Sep 17 00:00:00 2001
From: "Reddy, Teerth" <teerth@ti.com>
Date: Mon, 24 Aug 2009 11:58:59 +0530
Subject: OMAP3: PM: add T2 interrupt line mux setting, and enable on 3430SDP

This patch changes for setting the padconf value for sys_nirq line
which is connected to T2 INTR1.  This will fix the T2 keypad wakeup
issue on OMAP3 SDP.

Signed-off-by: Teerth Reddy <teerth@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/board-3430sdp.c   | 6 ++++++
 arch/arm/mach-omap2/mux.c             | 5 +++++
 arch/arm/plat-omap/include/mach/mux.h | 3 +++
 3 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7e9b76cc767..31d9f56c648 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -473,6 +473,11 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -490,6 +495,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	enable_board_wakeup_source();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index f63f3a23782..2daa595aaff 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -542,6 +542,11 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
 		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
 		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* SYS_NIRQ T2 INT1 */
+MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
+		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
+		OMAP34XX_MUX_MODE0)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 2c57bad65b0..98dfab651df 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -885,6 +885,9 @@ enum omap34xx_index {
 	AH9_3430_MMC3_DAT1,
 	AF13_3430_MMC3_DAT2,
 	AF13_3430_MMC3_DAT3,
+
+	/* SYS_NIRQ T2 INT1 */
+	AF26_34XX_SYS_NIRQ,
 };
 
 struct omap_mux_cfg {
-- 
cgit v1.2.3


From 2fcc81a38b699a81e47fdd655cf514c789576554 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Fri, 21 Aug 2009 13:11:20 -0500
Subject: OMAP: Zoom2: release debug board detect gpio line

Release the Dbg board detection gpio once its purpose is served

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/board-zoom-debugboard.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index e0948c92298..1f13e2a1f32 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -129,6 +129,7 @@ static inline void __init zoom2_init_quaduart(void)
 static inline int omap_zoom2_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
+	int ret = 1;
 
 	debug_board_detect = ZOOM2_SMSC911X_GPIO;
 
@@ -140,10 +141,10 @@ static inline int omap_zoom2_debugboard_detect(void)
 	gpio_direction_input(debug_board_detect);
 
 	if (!gpio_get_value(debug_board_detect)) {
-		gpio_free(debug_board_detect);
-		return 0;
+		ret = 0;
 	}
-	return 1;
+	gpio_free(debug_board_detect);
+	return ret;
 }
 
 static struct platform_device *zoom2_devices[] __initdata = {
-- 
cgit v1.2.3


From d3d381c6365ef5b06c4184a3fe047cf027533970 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Sat, 22 Aug 2009 21:20:26 +0800
Subject: OMAP3: PM: fix lockdep warning caused by omap3_pm_init

This patch uses kmalloc(size,GFP_ATOMIC) instead of kmalloc(size,GFP_KERNEL)
to allocate memory for instance of struct power_state in pwrdms_setup(),
since it may be called by pwrdm_for_each() with irq disabled.

It is a easy fix for the following lockdep warning caused by
kmalloc(size,GFP_KERNEL) in pwrdms_setup():

Power Management for TI OMAP3.
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2282 lockdep_trace_alloc+0xe8/0xfc()
Modules linked in:
[<c0032ccc>] (unwind_backtrace+0x0/0xec) from [<c0056934>] (warn_slowpath_common+0x48/0x60)
[<c0056934>] (warn_slowpath_common+0x48/0x60) from [<c007da10>] (lockdep_trace_alloc+0xe8/0xfc)
[<c007da10>] (lockdep_trace_alloc+0xe8/0xfc) from [<c00cd9bc>] (kmem_cache_alloc+0x28/0x178)
[<c00cd9bc>] (kmem_cache_alloc+0x28/0x178) from [<c000f184>] (pwrdms_setup+0x30/0xf8)
[<c000f184>] (pwrdms_setup+0x30/0xf8) from [<c00381c4>] (pwrdm_for_each+0x64/0x84)
[<c00381c4>] (pwrdm_for_each+0x64/0x84) from [<c000ef60>] (omap3_pm_init+0x3f4/0x5ac)
[<c000ef60>] (omap3_pm_init+0x3f4/0x5ac) from [<c002c2c0>] (do_one_initcall+0x30/0x1d4)
[<c002c2c0>] (do_one_initcall+0x30/0x1d4) from [<c00088d8>] (kernel_init+0xa4/0x118)
[<c00088d8>] (kernel_init+0xa4/0x118) from [<c002ddf8>] (kernel_thread_exit+0x0/0x8)
---[ end trace 1e06f8d97dc5a19b ]---

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm34xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 488d595d8e4..d67b781045b 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -665,7 +665,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
 	if (!pwrdm->pwrsts)
 		return 0;
 
-	pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
 	if (!pwrst)
 		return -ENOMEM;
 	pwrst->pwrdm = pwrdm;
-- 
cgit v1.2.3


From ba20bb126940ce4847e146a0d00b7f7b0868d773 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 17:48:43 +0300
Subject: OMAP: PM counter infrastructure.

This patch provides the infrastructure to count how many times a
powerdomain entered a given power state (on, inactive, retention,
off). A number of functions are provided which will be called by the
chip specific powerdomain and clockdomain code whenever a transition
might have happened.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/clockdomain.c             |   2 +
 arch/arm/mach-omap2/powerdomain.c             | 101 +++++++++++++++++++++++++-
 arch/arm/plat-omap/include/mach/powerdomain.h |   7 ++
 3 files changed, 108 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 0e7d501865b..26912a95dc1 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -484,6 +484,8 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 			    v << __ffs(clkdm->clktrctrl_mask),
 			    clkdm->pwrdm.ptr->prcm_offs,
 			    CM_CLKSTCTRL);
+
+	pwrdm_clkdm_state_switch(clkdm);
 }
 
 /**
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 983f1cb676b..a2d98718c6d 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -35,6 +35,11 @@
 #include <mach/powerdomain.h>
 #include <mach/clockdomain.h>
 
+enum {
+	PWRDM_STATE_NOW = 0,
+	PWRDM_STATE_PREV,
+};
+
 /* pwrdm_list contains all registered struct powerdomains */
 static LIST_HEAD(pwrdm_list);
 
@@ -102,6 +107,63 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 	return pd->pwrdm;
 }
 
+static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
+{
+
+	int prev;
+	int state;
+
+	if (pwrdm == NULL)
+		return -EINVAL;
+
+	state = pwrdm_read_pwrst(pwrdm);
+
+	switch (flag) {
+	case PWRDM_STATE_NOW:
+		prev = pwrdm->state;
+		break;
+	case PWRDM_STATE_PREV:
+		prev = pwrdm_read_prev_pwrst(pwrdm);
+		if (pwrdm->state != prev)
+			pwrdm->state_counter[prev]++;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (state != prev)
+		pwrdm->state_counter[state]++;
+
+	pwrdm->state = state;
+
+	return 0;
+}
+
+static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm)
+{
+	pwrdm_clear_all_prev_pwrst(pwrdm);
+	_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+	return 0;
+}
+
+static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm)
+{
+	_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
+	return 0;
+}
+
+static __init void _pwrdm_setup(struct powerdomain *pwrdm)
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		pwrdm->state_counter[i] = 0;
+
+	pwrdm_wait_transition(pwrdm);
+	pwrdm->state = pwrdm_read_pwrst(pwrdm);
+	pwrdm->state_counter[pwrdm->state] = 1;
+
+}
 
 /* Public functions */
 
@@ -117,9 +179,12 @@ void pwrdm_init(struct powerdomain **pwrdm_list)
 {
 	struct powerdomain **p = NULL;
 
-	if (pwrdm_list)
-		for (p = pwrdm_list; *p; p++)
+	if (pwrdm_list) {
+		for (p = pwrdm_list; *p; p++) {
 			pwrdm_register(*p);
+			_pwrdm_setup(*p);
+		}
+	}
 }
 
 /**
@@ -1110,4 +1175,36 @@ int pwrdm_wait_transition(struct powerdomain *pwrdm)
 	return 0;
 }
 
+int pwrdm_state_switch(struct powerdomain *pwrdm)
+{
+	return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
+}
+
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
+{
+	if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
+		pwrdm_wait_transition(clkdm->pwrdm.ptr);
+		return pwrdm_state_switch(clkdm->pwrdm.ptr);
+	}
+
+	return -EINVAL;
+}
+int pwrdm_clk_state_switch(struct clk *clk)
+{
+	if (clk != NULL && clk->clkdm != NULL)
+		return pwrdm_clkdm_state_switch(clk->clkdm);
+	return -EINVAL;
+}
+
+int pwrdm_pre_transition(void)
+{
+	pwrdm_for_each(_pwrdm_pre_transition_cb);
+	return 0;
+}
+
+int pwrdm_post_transition(void)
+{
+	pwrdm_for_each(_pwrdm_post_transition_cb);
+	return 0;
+}
 
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 69c9e675d8e..52663fc549d 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -117,6 +117,8 @@ struct powerdomain {
 
 	struct list_head node;
 
+	int state;
+	unsigned state_counter[4];
 };
 
 
@@ -164,4 +166,9 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
 
+int pwrdm_state_switch(struct powerdomain *pwrdm);
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
+int pwrdm_pre_transition(void);
+int pwrdm_post_transition(void);
+
 #endif
-- 
cgit v1.2.3


From fe617af716bc09cbbdd11ad820d5818017a9f481 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 17:48:44 +0300
Subject: OMAP: PM: Hook into PM counters

This patch modifies the clock, clockdomain and OMAP3 specific
powerdomain code to call the PM counter infrastructure whenever one or
more powerdomains might have changed state.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/clock.c       | 2 ++
 arch/arm/mach-omap2/clockdomain.c | 3 +++
 arch/arm/mach-omap2/pm34xx.c      | 6 ++++++
 3 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 456e2ad5f62..f2a92d614f0 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -1043,5 +1043,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 		omap2_clk_disable(clk);
 	} else
 		_omap2_clk_disable(clk);
+	if (clk->clkdm != NULL)
+		pwrdm_clkdm_state_switch(clk->clkdm);
 }
 #endif
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 26912a95dc1..5b0b90b76e1 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -574,6 +574,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 		omap2_clkdm_wakeup(clkdm);
 
 	pwrdm_wait_transition(clkdm->pwrdm.ptr);
+	pwrdm_clkdm_state_switch(clkdm);
 
 	return 0;
 }
@@ -626,6 +627,8 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	else
 		omap2_clkdm_sleep(clkdm);
 
+	pwrdm_clkdm_state_switch(clkdm);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 488d595d8e4..f1976242f99 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -170,6 +170,8 @@ static void omap_sram_idle(void)
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
 		return;
 	}
+	pwrdm_pre_transition();
+
 	omap2_gpio_prepare_for_retention();
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
@@ -182,6 +184,9 @@ static void omap_sram_idle(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 	omap2_gpio_resume_after_retention();
+
+	pwrdm_post_transition();
+
 }
 
 /*
@@ -271,6 +276,7 @@ static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 	if (sleep_switch) {
 		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
 		pwrdm_wait_transition(pwrdm);
+		pwrdm_state_switch(pwrdm);
 	}
 
 err:
-- 
cgit v1.2.3


From a23456e9b02b3fae0fc78cb33fad69803a50e5bc Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 18:13:47 +0300
Subject: OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.

Add some infrastructure to easily iterate over clock and power
domains.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/clockdomain.c             | 5 +++--
 arch/arm/mach-omap2/pm24xx.c                  | 4 ++--
 arch/arm/mach-omap2/pm34xx.c                  | 8 ++++----
 arch/arm/plat-omap/include/mach/clockdomain.h | 3 ++-
 arch/arm/plat-omap/include/mach/powerdomain.h | 3 ++-
 5 files changed, 13 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 5b0b90b76e1..4ef7b4f5474 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -299,7 +299,8 @@ struct clockdomain *clkdm_lookup(const char *name)
  * anything else to indicate failure; or -EINVAL if the function pointer
  * is null.
  */
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
+			void *user)
 {
 	struct clockdomain *clkdm;
 	int ret = 0;
@@ -309,7 +310,7 @@ int clkdm_for_each(int (*fn)(struct clockdomain *clkdm))
 
 	mutex_lock(&clkdm_mutex);
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		ret = (*fn)(clkdm);
+		ret = (*fn)(clkdm, user);
 		if (ret)
 			break;
 	}
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 528dbdc26e2..bff5c4e8974 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -333,7 +333,7 @@ static struct platform_suspend_ops omap_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm, void *unused)
 {
 	omap2_clkdm_allow_idle(clkdm);
 	return 0;
@@ -385,7 +385,7 @@ static void __init prcm_setup_regs(void)
 	omap2_clkdm_sleep(gfx_clkdm);
 
 	/* Enable clockdomain hardware-supervised control for all clkdms */
-	clkdm_for_each(_pm_clkdm_enable_hwsup);
+	clkdm_for_each(_pm_clkdm_enable_hwsup, NULL);
 
 	/* Enable clock autoidle for all domains */
 	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index f1976242f99..331dfca93ed 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -664,7 +664,7 @@ static void __init prcm_setup_regs(void)
 	omap3_d2d_idle();
 }
 
-static int __init pwrdms_setup(struct powerdomain *pwrdm)
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	struct power_state *pwrst;
 
@@ -689,7 +689,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
  * supported. Initiate sleep transition for other clockdomains, if
  * they are not used
  */
-static int __init clkdms_setup(struct clockdomain *clkdm)
+static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
@@ -722,13 +722,13 @@ static int __init omap3_pm_init(void)
 		goto err1;
 	}
 
-	ret = pwrdm_for_each(pwrdms_setup);
+	ret = pwrdm_for_each(pwrdms_setup, NULL);
 	if (ret) {
 		printk(KERN_ERR "Failed to setup powerdomains\n");
 		goto err2;
 	}
 
-	(void) clkdm_for_each(clkdms_setup);
+	(void) clkdm_for_each(clkdms_setup, NULL);
 
 	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
 	if (mpu_pwrdm == NULL) {
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
index b9d0dd2da89..99ebd886f13 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/mach/clockdomain.h
@@ -95,7 +95,8 @@ int clkdm_register(struct clockdomain *clkdm);
 int clkdm_unregister(struct clockdomain *clkdm);
 struct clockdomain *clkdm_lookup(const char *name);
 
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm));
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
+			void *user);
 struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
 
 void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index 52663fc549d..de03f3dbbf3 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -128,7 +128,8 @@ int pwrdm_register(struct powerdomain *pwrdm);
 int pwrdm_unregister(struct powerdomain *pwrdm);
 struct powerdomain *pwrdm_lookup(const char *name);
 
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm));
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-- 
cgit v1.2.3


From 331b93f41dff21c8f95709032cb184fb82bf2003 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 18:13:48 +0300
Subject: OMAP: PM: Add pm-debug counters

This patch provides the debugfs entries and a function which will be
called by the PM code to register the time spent per domain per
state. Also some new fields are added to the powerdomain struct to
keep the time information.

NOTE: As of v2.6.29, using getnstimeofday() after drivers are
suspended is no longer safe since the timekeeping subsystem is also
suspended as part of the suspend process.  Instead use sched_clock()
which on OMAP returns the 32k SYNC timer in nanoseconds.

Also, do not print out status for meta powerdomains (dpll*)

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c                | 178 +++++++++++++++++++++++++-
 arch/arm/mach-omap2/pm.h                      |   4 +
 arch/arm/plat-omap/include/mach/powerdomain.h |   5 +
 3 files changed, 186 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index da3a53f8ccc..7383e85eac2 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -20,13 +20,15 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/timer.h>
+#include <linux/sched.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
 #include <mach/clock.h>
 #include <mach/board.h>
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
 
 #include "prm.h"
 #include "cm.h"
@@ -150,3 +152,177 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 	for (i = 0; i < reg_count; i++)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+struct dentry *pm_dbg_dir;
+
+static int pm_dbg_init_done;
+
+enum {
+	DEBUG_FILE_COUNTERS = 0,
+	DEBUG_FILE_TIMERS,
+};
+
+static const char pwrdm_state_names[][4] = {
+	"OFF",
+	"RET",
+	"INA",
+	"ON"
+};
+
+void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
+{
+	s64 t;
+
+	if (!pm_dbg_init_done)
+		return ;
+
+	/* Update timer for previous state */
+	t = sched_clock();
+
+	pwrdm->state_timer[prev] += t - pwrdm->timer;
+
+	pwrdm->timer = t;
+}
+
+static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+
+	if (strcmp(clkdm->name, "emu_clkdm") == 0 ||
+		strcmp(clkdm->name, "wkup_clkdm") == 0 ||
+		strncmp(clkdm->name, "dpll", 4) == 0)
+		return 0;
+
+	seq_printf(s, "%s->%s (%d)", clkdm->name,
+			clkdm->pwrdm.ptr->name,
+			atomic_read(&clkdm->usecount));
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+	int i;
+
+	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
+		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
+		strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	if (pwrdm->state != pwrdm_read_pwrst(pwrdm))
+		printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n",
+			pwrdm->name, pwrdm->state, pwrdm_read_pwrst(pwrdm));
+
+	seq_printf(s, "%s (%s)", pwrdm->name,
+			pwrdm_state_names[pwrdm->state]);
+	for (i = 0; i < 4; i++)
+		seq_printf(s, ",%s:%d", pwrdm_state_names[i],
+			pwrdm->state_counter[i]);
+
+	seq_printf(s, "\n");
+
+	return 0;
+}
+
+static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user)
+{
+	struct seq_file *s = (struct seq_file *)user;
+	int i;
+
+	if (strcmp(pwrdm->name, "emu_pwrdm") == 0 ||
+		strcmp(pwrdm->name, "wkup_pwrdm") == 0 ||
+		strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	pwrdm_state_switch(pwrdm);
+
+	seq_printf(s, "%s (%s)", pwrdm->name,
+		pwrdm_state_names[pwrdm->state]);
+
+	for (i = 0; i < 4; i++)
+		seq_printf(s, ",%s:%lld", pwrdm_state_names[i],
+			pwrdm->state_timer[i]);
+
+	seq_printf(s, "\n");
+	return 0;
+}
+
+static int pm_dbg_show_counters(struct seq_file *s, void *unused)
+{
+	pwrdm_for_each(pwrdm_dbg_show_counter, s);
+	clkdm_for_each(clkdm_dbg_show_counter, s);
+
+	return 0;
+}
+
+static int pm_dbg_show_timers(struct seq_file *s, void *unused)
+{
+	pwrdm_for_each(pwrdm_dbg_show_timer, s);
+	return 0;
+}
+
+static int pm_dbg_open(struct inode *inode, struct file *file)
+{
+	switch ((int)inode->i_private) {
+	case DEBUG_FILE_COUNTERS:
+		return single_open(file, pm_dbg_show_counters,
+			&inode->i_private);
+	case DEBUG_FILE_TIMERS:
+	default:
+		return single_open(file, pm_dbg_show_timers,
+			&inode->i_private);
+	};
+}
+
+static const struct file_operations debug_fops = {
+	.open           = pm_dbg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
+{
+	int i;
+	s64 t;
+
+	t = sched_clock();
+
+	for (i = 0; i < 4; i++)
+		pwrdm->state_timer[i] = 0;
+
+	pwrdm->timer = t;
+
+	return 0;
+}
+
+static int __init pm_dbg_init(void)
+{
+	struct dentry *d;
+
+	d = debugfs_create_dir("pm_debug", NULL);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+
+	(void) debugfs_create_file("count", S_IRUGO,
+		d, (void *)DEBUG_FILE_COUNTERS, &debug_fops);
+	(void) debugfs_create_file("time", S_IRUGO,
+		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
+
+	pwrdm_for_each(pwrdms_setup, NULL);
+
+	pm_dbg_init_done = 1;
+
+	return 0;
+}
+late_initcall(pm_dbg_init);
+
+#else
+void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
+#endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 21201cd4117..4589db1c8af 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,12 +11,16 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
+#include <mach/powerdomain.h>
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
 #define omap2_pm_debug				0
+#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
 #endif /* CONFIG_PM_DEBUG */
 
 extern void omap24xx_idle_loop_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
index de03f3dbbf3..6271d8556a4 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/mach/powerdomain.h
@@ -119,6 +119,11 @@ struct powerdomain {
 
 	int state;
 	unsigned state_counter[4];
+
+#ifdef CONFIG_PM_DEBUG
+	s64 timer;
+	s64 state_timer[4];
+#endif
 };
 
 
-- 
cgit v1.2.3


From 6199ab2690ca6f44f838603da079b3faa837e502 Mon Sep 17 00:00:00 2001
From: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Date: Wed, 15 Oct 2008 18:13:49 +0300
Subject: OMAP: PM debug: make powerdomains use PM-debug counters

Make the powerdomain code call the new hook for updating the time.
Also implement the updated pwrdm_for_each.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/powerdomain.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index a2d98718c6d..5a6cef3e42b 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -35,6 +35,8 @@
 #include <mach/powerdomain.h>
 #include <mach/clockdomain.h>
 
+#include "pm.h"
+
 enum {
 	PWRDM_STATE_NOW = 0,
 	PWRDM_STATE_PREV,
@@ -134,19 +136,21 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 	if (state != prev)
 		pwrdm->state_counter[state]++;
 
+	pm_dbg_update_time(pwrdm, prev);
+
 	pwrdm->state = state;
 
 	return 0;
 }
 
-static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm)
+static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
 {
 	pwrdm_clear_all_prev_pwrst(pwrdm);
 	_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
 	return 0;
 }
 
-static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm)
+static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
 {
 	_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
 	return 0;
@@ -282,7 +286,8 @@ struct powerdomain *pwrdm_lookup(const char *name)
  * anything else to indicate failure; or -EINVAL if the function
  * pointer is null.
  */
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user)
 {
 	struct powerdomain *temp_pwrdm;
 	unsigned long flags;
@@ -293,7 +298,7 @@ int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm))
 
 	read_lock_irqsave(&pwrdm_rwlock, flags);
 	list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
-		ret = (*fn)(temp_pwrdm);
+		ret = (*fn)(temp_pwrdm, user);
 		if (ret)
 			break;
 	}
@@ -1198,13 +1203,13 @@ int pwrdm_clk_state_switch(struct clk *clk)
 
 int pwrdm_pre_transition(void)
 {
-	pwrdm_for_each(_pwrdm_pre_transition_cb);
+	pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
 	return 0;
 }
 
 int pwrdm_post_transition(void)
 {
-	pwrdm_for_each(_pwrdm_post_transition_cb);
+	pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 2811d6b3237c9b77007a6b2b10ee5b576da0574e Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Wed, 29 Oct 2008 13:31:24 +0200
Subject: OMAP: PM debug: Add PRCM register dump support

Allows dumping out current register contents from the debug filesystem, and
also allows user to add arbitrary register save points into code. Current
register contents are available under debugfs at:

[debugfs]/pm_debug/registers/current

To add a save point, do following:

From module init (or somewhere before the save call, called only once):
  pm_dbg_init_regset(n); // n=1..4, allocates memory for dump area #n

From arbitrary code location:
  pm_dbg_regset_save(n); // n=1..4, saves registers to dump area #n

After this, the register dump can be seen under [debugfs]/pm_debug/registers/n

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c | 226 ++++++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-omap2/pm.h       |   4 +
 2 files changed, 229 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 7383e85eac2..982aa67f268 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -52,6 +52,8 @@ int omap2_pm_debug;
 	regs[reg_count].name = #reg; \
 	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
 
+static int __init pm_dbg_init(void);
+
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
 	struct reg {
@@ -157,6 +159,8 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
+static void pm_dbg_regset_store(u32 *ptr);
+
 struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
@@ -166,6 +170,160 @@ enum {
 	DEBUG_FILE_TIMERS,
 };
 
+struct pm_module_def {
+	char name[8]; /* Name of the module */
+	short type; /* CM or PRM */
+	unsigned short offset;
+	int low; /* First register address on this module */
+	int high; /* Last register address on this module */
+};
+
+#define MOD_CM 0
+#define MOD_PRM 1
+
+static const struct pm_module_def *pm_dbg_reg_modules;
+static const struct pm_module_def omap3_pm_reg_modules[] = {
+	{ "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c },
+	{ "OCP", MOD_CM, OCP_MOD, 0, 0x10 },
+	{ "MPU", MOD_CM, MPU_MOD, 4, 0x4c },
+	{ "CORE", MOD_CM, CORE_MOD, 0, 0x4c },
+	{ "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c },
+	{ "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 },
+	{ "CCR", MOD_CM, PLL_MOD, 0, 0x70 },
+	{ "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c },
+	{ "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c },
+	{ "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c },
+	{ "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 },
+	{ "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 },
+	{ "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c },
+
+	{ "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc },
+	{ "OCP", MOD_PRM, OCP_MOD, 4, 0x1c },
+	{ "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 },
+	{ "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 },
+	{ "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 },
+	{ "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 },
+	{ "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 },
+	{ "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 },
+	{ "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 },
+	{ "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 },
+	{ "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 },
+	{ "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 },
+	{ "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 },
+	{ "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 },
+	{ "", 0, 0, 0, 0 },
+};
+
+#define PM_DBG_MAX_REG_SETS 4
+
+static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS];
+
+static int pm_dbg_get_regset_size(void)
+{
+	static int regset_size;
+
+	if (regset_size == 0) {
+		int i = 0;
+
+		while (pm_dbg_reg_modules[i].name[0] != 0) {
+			regset_size += pm_dbg_reg_modules[i].high +
+				4 - pm_dbg_reg_modules[i].low;
+			i++;
+		}
+	}
+	return regset_size;
+}
+
+static int pm_dbg_show_regs(struct seq_file *s, void *unused)
+{
+	int i, j;
+	unsigned long val;
+	int reg_set = (int)s->private;
+	u32 *ptr;
+	void *store = NULL;
+	int regs;
+	int linefeed;
+
+	if (reg_set == 0) {
+		store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
+		ptr = store;
+		pm_dbg_regset_store(ptr);
+	} else {
+		ptr = pm_dbg_reg_set[reg_set - 1];
+	}
+
+	i = 0;
+
+	while (pm_dbg_reg_modules[i].name[0] != 0) {
+		regs = 0;
+		linefeed = 0;
+		if (pm_dbg_reg_modules[i].type == MOD_CM)
+			seq_printf(s, "MOD: CM_%s (%08x)\n",
+				pm_dbg_reg_modules[i].name,
+				(u32)(OMAP3430_CM_BASE +
+				pm_dbg_reg_modules[i].offset));
+		else
+			seq_printf(s, "MOD: PRM_%s (%08x)\n",
+				pm_dbg_reg_modules[i].name,
+				(u32)(OMAP3430_PRM_BASE +
+				pm_dbg_reg_modules[i].offset));
+
+		for (j = pm_dbg_reg_modules[i].low;
+			j <= pm_dbg_reg_modules[i].high; j += 4) {
+			val = *(ptr++);
+			if (val != 0) {
+				regs++;
+				if (linefeed) {
+					seq_printf(s, "\n");
+					linefeed = 0;
+				}
+				seq_printf(s, "  %02x => %08lx", j, val);
+				if (regs % 4 == 0)
+					linefeed = 1;
+			}
+		}
+		seq_printf(s, "\n");
+		i++;
+	}
+
+	if (store != NULL)
+		kfree(store);
+
+	return 0;
+}
+
+static void pm_dbg_regset_store(u32 *ptr)
+{
+	int i, j;
+	u32 val;
+
+	i = 0;
+
+	while (pm_dbg_reg_modules[i].name[0] != 0) {
+		for (j = pm_dbg_reg_modules[i].low;
+			j <= pm_dbg_reg_modules[i].high; j += 4) {
+			if (pm_dbg_reg_modules[i].type == MOD_CM)
+				val = cm_read_mod_reg(
+					pm_dbg_reg_modules[i].offset, j);
+			else
+				val = prm_read_mod_reg(
+					pm_dbg_reg_modules[i].offset, j);
+			*(ptr++) = val;
+		}
+		i++;
+	}
+}
+
+int pm_dbg_regset_save(int reg_set)
+{
+	if (pm_dbg_reg_set[reg_set-1] == NULL)
+		return -EINVAL;
+
+	pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]);
+
+	return 0;
+}
+
 static const char pwrdm_state_names[][4] = {
 	"OFF",
 	"RET",
@@ -280,6 +438,11 @@ static int pm_dbg_open(struct inode *inode, struct file *file)
 	};
 }
 
+static int pm_dbg_reg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pm_dbg_show_regs, inode->i_private);
+}
+
 static const struct file_operations debug_fops = {
 	.open           = pm_dbg_open,
 	.read           = seq_read,
@@ -287,6 +450,40 @@ static const struct file_operations debug_fops = {
 	.release        = single_release,
 };
 
+static const struct file_operations debug_reg_fops = {
+	.open           = pm_dbg_reg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+int pm_dbg_regset_init(int reg_set)
+{
+	char name[2];
+
+	if (!pm_dbg_init_done)
+		pm_dbg_init();
+
+	if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS ||
+		pm_dbg_reg_set[reg_set-1] != NULL)
+		return -EINVAL;
+
+	pm_dbg_reg_set[reg_set-1] =
+		kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL);
+
+	if (pm_dbg_reg_set[reg_set-1] == NULL)
+		return -ENOMEM;
+
+	if (pm_dbg_dir != NULL) {
+		sprintf(name, "%d", reg_set);
+
+		(void) debugfs_create_file(name, S_IRUGO,
+			pm_dbg_dir, (void *)reg_set, &debug_reg_fops);
+	}
+
+	return 0;
+}
+
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	int i;
@@ -304,8 +501,20 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 
 static int __init pm_dbg_init(void)
 {
+	int i;
 	struct dentry *d;
+	char name[2];
 
+	if (pm_dbg_init_done)
+		return 0;
+
+	if (cpu_is_omap34xx())
+		pm_dbg_reg_modules = omap3_pm_reg_modules;
+	else {
+		printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
+		return -ENODEV;
+	}
+		
 	d = debugfs_create_dir("pm_debug", NULL);
 	if (IS_ERR(d))
 		return PTR_ERR(d);
@@ -317,11 +526,26 @@ static int __init pm_dbg_init(void)
 
 	pwrdm_for_each(pwrdms_setup, NULL);
 
+	pm_dbg_dir = debugfs_create_dir("registers", d);
+	if (IS_ERR(pm_dbg_dir))
+		return PTR_ERR(pm_dbg_dir);
+
+	(void) debugfs_create_file("current", S_IRUGO,
+		pm_dbg_dir, (void *)0, &debug_reg_fops);
+
+	for (i = 0; i < PM_DBG_MAX_REG_SETS; i++)
+		if (pm_dbg_reg_set[i] != NULL) {
+			sprintf(name, "%d", i+1);
+			(void) debugfs_create_file(name, S_IRUGO,
+				pm_dbg_dir, (void *)(i+1), &debug_reg_fops);
+
+		}
+
 	pm_dbg_init_done = 1;
 
 	return 0;
 }
-late_initcall(pm_dbg_init);
+arch_initcall(pm_dbg_init);
 
 #else
 void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 4589db1c8af..8fa85677018 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -17,10 +17,14 @@
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
+extern int pm_dbg_regset_save(int reg_set);
+extern int pm_dbg_regset_init(int reg_set);
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
 #define omap2_pm_debug				0
 #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
+#define pm_dbg_regset_save(reg_set) do {} while (0);
+#define pm_dbg_regset_init(reg_set) do {} while (0);
 #endif /* CONFIG_PM_DEBUG */
 
 extern void omap24xx_idle_loop_suspend(void);
-- 
cgit v1.2.3


From 68d4778c701b7e22ddfd64e3afb6628c92718ad2 Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Wed, 26 Nov 2008 12:26:24 +0200
Subject: OMAP: PM: Added suspend target state control to debugfs for OMAP3

Target state can be read / programmed via files under:
  [debugfs]/pm_debug/[pwrdm]/suspend

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-omap2/pm-debug.c | 31 +++++++++++++++++++++++++++++--
 arch/arm/mach-omap2/pm.h       |  3 +++
 arch/arm/mach-omap2/pm34xx.c   | 24 ++++++++++++++++++++++++
 3 files changed, 56 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 982aa67f268..1b4c1600f8d 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -24,6 +24,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/module.h>
 
 #include <mach/clock.h>
 #include <mach/board.h>
@@ -484,10 +485,28 @@ int pm_dbg_regset_init(int reg_set)
 	return 0;
 }
 
-static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
+static int pwrdm_suspend_get(void *data, u64 *val)
+{
+	*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+
+	if (*val >= 0)
+		return 0;
+	return *val;
+}
+
+static int pwrdm_suspend_set(void *data, u64 val)
+{
+	return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
+			pwrdm_suspend_set, "%llu\n");
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 {
 	int i;
 	s64 t;
+	struct dentry *d;
 
 	t = sched_clock();
 
@@ -496,6 +515,14 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 
 	pwrdm->timer = t;
 
+	if (strncmp(pwrdm->name, "dpll", 4) == 0)
+		return 0;
+
+	d = debugfs_create_dir(pwrdm->name, (struct dentry *)dir);
+
+	(void) debugfs_create_file("suspend", S_IRUGO|S_IWUSR, d,
+			(void *)pwrdm, &pwrdm_suspend_fops);
+
 	return 0;
 }
 
@@ -524,7 +551,7 @@ static int __init pm_dbg_init(void)
 	(void) debugfs_create_file("time", S_IRUGO,
 		d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
 
-	pwrdm_for_each(pwrdms_setup, NULL);
+	pwrdm_for_each(pwrdms_setup, (void *)d);
 
 	pm_dbg_dir = debugfs_create_dir("registers", d);
 	if (IS_ERR(pm_dbg_dir))
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8fa85677018..8400f576892 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -13,6 +13,9 @@
 
 #include <mach/powerdomain.h>
 
+extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
+extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 331dfca93ed..26f2aca9abe 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -664,6 +664,30 @@ static void __init prcm_setup_regs(void)
 	omap3_d2d_idle();
 }
 
+int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
+{
+	struct power_state *pwrst;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (pwrst->pwrdm == pwrdm)
+			return pwrst->next_state;
+	}
+	return -EINVAL;
+}
+
+int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state)
+{
+	struct power_state *pwrst;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		if (pwrst->pwrdm == pwrdm) {
+			pwrst->next_state = state;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 {
 	struct power_state *pwrst;
-- 
cgit v1.2.3


From a3df6f7d3090e611bcc774cd2cba45ae016d37e1 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Thu, 3 Sep 2009 11:52:02 +1000
Subject: perf_counter/powerpc: Fix cache event codes for POWER7

I had the codes for L1 D-cache load accesses and misses swapped
around, and the wrong codes for LL-cache accesses and misses.
This corrects them.

Reported-by: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
LKML-Reference: <19103.8514.709300.585484@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/kernel/power7-pmu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 388cf57ad82..018d094d92f 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -317,7 +317,7 @@ static int power7_generic_events[] = {
  */
 static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
-		[C(OP_READ)] = {	0x400f0,	0xc880	},
+		[C(OP_READ)] = {	0xc880,		0x400f0	},
 		[C(OP_WRITE)] = {	0,		0x300f0	},
 		[C(OP_PREFETCH)] = {	0xd8b8,		0	},
 	},
@@ -327,8 +327,8 @@ static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 		[C(OP_PREFETCH)] = {	0x408a,		0	},
 	},
 	[C(LL)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
-		[C(OP_READ)] = {	0x6080,		0x6084	},
-		[C(OP_WRITE)] = {	0x6082,		0x6086	},
+		[C(OP_READ)] = {	0x16080,	0x26080	},
+		[C(OP_WRITE)] = {	0x16082,	0x26082	},
 		[C(OP_PREFETCH)] = {	0,		0	},
 	},
 	[C(DTLB)] = {		/* 	RESULT_ACCESS	RESULT_MISS */
-- 
cgit v1.2.3


From 0906a3ad33a254094fb74828e3ddb9af8771a6da Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 3 Sep 2009 17:21:10 +0900
Subject: sh: Fix up and optimize the kmap_coherent() interface.

This fixes up the kmap_coherent/kunmap_coherent() interface for recent
changes both in the page fault path and the shared cache flushers, as
well as adding in some optimizations.

One of the key things to note here is that the TLB flush itself is
deferred until the unmap, and the call in to update_mmu_cache() itself
goes away, relying on the regular page fault path to handle the lazy
dcache writeback if necessary.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/cacheflush.h |  2 +-
 arch/sh/include/asm/pgtable_32.h |  8 ++++++-
 arch/sh/include/asm/pgtable_64.h |  5 +++++
 arch/sh/mm/cache.c               |  8 +++----
 arch/sh/mm/fault_32.c            |  4 ++--
 arch/sh/mm/init.c                | 45 ++++++++++++++++++++++------------------
 arch/sh/mm/kmap.c                | 36 +++++++++++++++-----------------
 arch/sh/mm/nommu.c               |  2 +-
 8 files changed, 62 insertions(+), 48 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 11e41663058..c29918f3c81 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -85,7 +85,7 @@ extern void copy_from_user_page(struct vm_area_struct *vma,
 
 void kmap_coherent_init(void);
 void *kmap_coherent(struct page *page, unsigned long addr);
-void kunmap_coherent(void);
+void kunmap_coherent(void *kvaddr);
 
 #define PG_dcache_dirty	PG_arch_1
 
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 4c4429cda56..c0d359ce337 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -408,13 +408,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 /* to find an entry in a page-table-directory. */
 #define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+#define __pgd_offset(address)	pgd_index(address)
 
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(address)	pgd_offset(&init_mm, address)
 
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
 /* Find an entry in the third-level page table.. */
 #define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define __pte_offset(address)	pte_index(address)
+
 #define pte_offset_kernel(dir, address) \
 	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
 #define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
index c78990cda55..17cdbecc3ad 100644
--- a/arch/sh/include/asm/pgtable_64.h
+++ b/arch/sh/include/asm/pgtable_64.h
@@ -60,6 +60,9 @@ static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
 /* To find an entry in a kernel PGD. */
 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
+#define __pud_offset(address)	(((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define __pmd_offset(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+
 /*
  * PMD level access routines. Same notes as above.
  */
@@ -80,6 +83,8 @@ static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
 #define pte_index(address) \
 		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
+#define __pte_offset(address)	pte_index(address)
+
 #define pte_offset_kernel(dir, addr) \
 		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
 
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index db2b1c5beff..8e4a8d1ac4a 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -51,7 +51,7 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 	    !test_bit(PG_dcache_dirty, &page->flags)) {
 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(vto, src, len);
-		kunmap_coherent();
+		kunmap_coherent(vto);
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
@@ -70,7 +70,7 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 	    !test_bit(PG_dcache_dirty, &page->flags)) {
 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(dst, vfrom, len);
-		kunmap_coherent();
+		kunmap_coherent(vfrom);
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
@@ -89,7 +89,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 	    !test_bit(PG_dcache_dirty, &from->flags)) {
 		vfrom = kmap_coherent(from, vaddr);
 		copy_page(vto, vfrom);
-		kunmap_coherent();
+		kunmap_coherent(vfrom);
 	} else {
 		vfrom = kmap_atomic(from, KM_USER0);
 		copy_page(vto, vfrom);
@@ -150,7 +150,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 
 			kaddr = kmap_coherent(page, vmaddr);
 			__flush_wback_region((void *)kaddr, PAGE_SIZE);
-			kunmap_coherent();
+			kunmap_coherent(kaddr);
 		} else
 			__flush_wback_region((void *)addr, PAGE_SIZE);
 	}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index f1c93c880ed..781b413ff82 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -82,8 +82,8 @@ static noinline int vmalloc_fault(unsigned long address)
 	pmd_t *pmd_k;
 	pte_t *pte_k;
 
-	/* Make sure we are in vmalloc area: */
-	if (!(address >= VMALLOC_START && address < VMALLOC_END))
+	/* Make sure we are in vmalloc/module/P3 area: */
+	if (!(address >= VMALLOC_START && address < P3_ADDR_MAX))
 		return -1;
 
 	/*
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 0a9b4d855bc..edc842ff61e 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -106,27 +106,31 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
-	int pgd_idx;
+	pte_t *pte;
+	int i, j, k;
 	unsigned long vaddr;
 
-	vaddr = start & PMD_MASK;
-	end = (end + PMD_SIZE - 1) & PMD_MASK;
-	pgd_idx = pgd_index(vaddr);
-	pgd = pgd_base + pgd_idx;
-
-	for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) {
-		BUG_ON(pgd_none(*pgd));
-		pud = pud_offset(pgd, 0);
-		BUG_ON(pud_none(*pud));
-		pmd = pmd_offset(pud, 0);
-
-		if (!pmd_present(*pmd)) {
-			pte_t *pte_table;
-			pte_table = (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-			pmd_populate_kernel(&init_mm, pmd, pte_table);
+	vaddr = start;
+	i = __pgd_offset(vaddr);
+	j = __pud_offset(vaddr);
+	k = __pmd_offset(vaddr);
+	pgd = pgd_base + i;
+
+	for ( ; (i < PTRS_PER_PGD) && (vaddr != end); pgd++, i++) {
+		pud = (pud_t *)pgd;
+		for ( ; (j < PTRS_PER_PUD) && (vaddr != end); pud++, j++) {
+			pmd = (pmd_t *)pud;
+			for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) {
+				if (pmd_none(*pmd)) {
+					pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+					pmd_populate_kernel(&init_mm, pmd, pte);
+					BUG_ON(pte != pte_offset_kernel(pmd, 0));
+				}
+				vaddr += PMD_SIZE;
+			}
+			k = 0;
 		}
-
-		vaddr += PMD_SIZE;
+		j = 0;
 	}
 }
 #endif	/* CONFIG_MMU */
@@ -137,7 +141,7 @@ void __init page_table_range_init(unsigned long start, unsigned long end,
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
-	unsigned long vaddr;
+	unsigned long vaddr, end;
 	int nid;
 
 	/* We don't need to map the kernel through the TLB, as
@@ -155,7 +159,8 @@ void __init paging_init(void)
 	 * pte's will be filled in by __set_fixmap().
 	 */
 	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
-	page_table_range_init(vaddr, 0, swapper_pg_dir);
+	end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
+	page_table_range_init(vaddr, end, swapper_pg_dir);
 
 	kmap_coherent_init();
 
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index 3eecf0d42f1..c52cd8c40a6 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -24,9 +24,6 @@ void __init kmap_coherent_init(void)
 {
 	unsigned long vaddr;
 
-	if (!boot_cpu_data.dcache.n_aliases)
-		return;
-
 	/* cache the first coherent kmap pte */
 	vaddr = __fix_to_virt(FIX_CMAP_BEGIN);
 	kmap_coherent_pte = kmap_get_fixmap_pte(vaddr);
@@ -35,30 +32,31 @@ void __init kmap_coherent_init(void)
 void *kmap_coherent(struct page *page, unsigned long addr)
 {
 	enum fixed_addresses idx;
-	unsigned long vaddr, flags;
-	pte_t pte;
+	unsigned long vaddr;
 
 	BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
 
-	inc_preempt_count();
-
-	idx = (addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT;
-	vaddr = __fix_to_virt(FIX_CMAP_END - idx);
-	pte = mk_pte(page, PAGE_KERNEL);
+	pagefault_disable();
 
-	local_irq_save(flags);
-	flush_tlb_one(get_asid(), vaddr);
-	local_irq_restore(flags);
+	idx = FIX_CMAP_END -
+		((addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT);
+	vaddr = __fix_to_virt(idx);
 
-	update_mmu_cache(NULL, vaddr, pte);
-
-	set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte);
+	BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
+	set_pte(kmap_coherent_pte - idx, mk_pte(page, PAGE_KERNEL));
 
 	return (void *)vaddr;
 }
 
-void kunmap_coherent(void)
+void kunmap_coherent(void *kvaddr)
 {
-	dec_preempt_count();
-	preempt_check_resched();
+	if (kvaddr >= (void *)FIXADDR_START) {
+		unsigned long vaddr = (unsigned long)kvaddr & PAGE_MASK;
+		enum fixed_addresses idx = __virt_to_fix(vaddr);
+
+		pte_clear(&init_mm, vaddr, kmap_coherent_pte - idx);
+		local_flush_tlb_one(get_asid(), vaddr);
+	}
+
+	pagefault_enable();
 }
diff --git a/arch/sh/mm/nommu.c b/arch/sh/mm/nommu.c
index 51b54037216..ac16c05917e 100644
--- a/arch/sh/mm/nommu.c
+++ b/arch/sh/mm/nommu.c
@@ -81,7 +81,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 	return NULL;
 }
 
-void kunmap_coherent(void)
+void kunmap_coherent(void *kvaddr)
 {
 	BUG();
 }
-- 
cgit v1.2.3


From e6617c6ec28a17cf2f90262b835ec05b9b861400 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 3 Sep 2009 02:35:20 -0700
Subject: sparc64: Kill spurious NMI watchdog triggers by increasing limit to
 30 seconds.

This is a compromise and a temporary workaround for bootup NMI
watchdog triggers some people see with qla2xxx devices present.

This happens when, for example:

CPU 0 is in the driver init and looping submitting mailbox commands to
load the firmware, then waiting for completion.

CPU 1 is receiving the device interrupts.  CPU 1 is where the NMI
watchdog triggers.

CPU 0 is submitting mailbox commands fast enough that by the time CPU
1 returns from the device interrupt handler, a new one is pending.
This sequence runs for more than 5 seconds.

The problematic case is CPU 1's timer interrupt running when the
barrage of device interrupts begin.  Then we have:

	timer interrupt
	return for softirq checking
	pending, thus enable interrupts

		 qla2xxx interrupt
		 return
		 qla2xxx interrupt
		 return
		 ... 5+ seconds pass
		 final qla2xxx interrupt for fw load
		 return

	run timer softirq
	return

At some point in the multi-second qla2xxx interrupt storm we trigger
the NMI watchdog on CPU 1 from the NMI interrupt handler.

The timer softirq, once we get back to running it, is smart enough to
run the timer work enough times to make up for the missed timer
interrupts.

However, the NMI watchdogs (both x86 and sparc) use the timer
interrupt count to notice the cpu is wedged.  But in the above
scenerio we'll receive only one such timer interrupt even if we last
all the way back to running the timer softirq.

The default watchdog trigger point is only 5 seconds, which is pretty
low (the softwatchdog triggers at 60 seconds).  So increase it to 30
seconds for now.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/nmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 2c0cc72d295..b75bf502cd4 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -103,7 +103,7 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 	}
 	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
 		local_inc(&__get_cpu_var(alert_counter));
-		if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+		if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz)
 			die_nmi("BUG: NMI Watchdog detected LOCKUP",
 				regs, panic_on_timeout);
 	} else {
-- 
cgit v1.2.3


From e3e59876e82a5e1a07f365d5474e7b6943524725 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 14:02:10 +0200
Subject: x86/amd-iommu: Dump fault entry on DTE error

This patch adds code to dump the content of the device table
entry which caused an ILLEGAL_DEV_TABLE_ENTRY error from the
IOMMU hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..364c6de2637 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -138,6 +138,15 @@ static int iommu_has_npcache(struct amd_iommu *iommu)
  *
  ****************************************************************************/
 
+static void dump_dte_entry(u16 devid)
+{
+	int i;
+
+	for (i = 0; i < 8; ++i)
+		pr_err("AMD-Vi: DTE[%d]: %08x\n", i,
+			amd_iommu_dev_table[devid].data[i]);
+}
+
 static void iommu_print_event(void *__evt)
 {
 	u32 *event = __evt;
@@ -155,6 +164,7 @@ static void iommu_print_event(void *__evt)
 		       "address=0x%016llx flags=0x%04x]\n",
 		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
 		       address, flags);
+		dump_dte_entry(devid);
 		break;
 	case EVENT_TYPE_IO_FAULT:
 		printk("IO_PAGE_FAULT device=%02x:%02x.%x "
-- 
cgit v1.2.3


From 945b4ac44e5700acd3d974c176c8ace34b4d2e8e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 14:25:02 +0200
Subject: x86/amd-iommu: Dump illegal command on ILLEGAL_COMMAND_ERROR

This patch adds code to dump the command which caused an
ILLEGAL_COMMAND_ERROR raised by the IOMMU hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 364c6de2637..e62b35f5df1 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -147,6 +147,15 @@ static void dump_dte_entry(u16 devid)
 			amd_iommu_dev_table[devid].data[i]);
 }
 
+static void dump_command(unsigned long phys_addr)
+{
+	struct iommu_cmd *cmd = phys_to_virt(phys_addr);
+	int i;
+
+	for (i = 0; i < 4; ++i)
+		pr_err("AMD-Vi: CMD[%d]: %08x\n", i, cmd->data[i]);
+}
+
 static void iommu_print_event(void *__evt)
 {
 	u32 *event = __evt;
@@ -186,6 +195,7 @@ static void iommu_print_event(void *__evt)
 		break;
 	case EVENT_TYPE_ILL_CMD:
 		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+		dump_command(address);
 		break;
 	case EVENT_TYPE_CMD_HARD_ERR:
 		printk("COMMAND_HARDWARE_ERROR address=0x%016llx "
-- 
cgit v1.2.3


From e394d72aa8b319211b8f947d151d9d50b0fde842 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:28:33 +0200
Subject: x86/amd-iommu: Introduce function for iommu-local domain flush

This patch introduces a function to flush all domain tlbs
for on one given IOMMU. This is required later to reset the
command buffer on one IOMMU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 49 ++++++++++++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index e62b35f5df1..64cc582feb9 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -465,38 +465,55 @@ static void iommu_flush_tlb_pde(struct amd_iommu *iommu, u16 domid)
 }
 
 /*
- * This function is used to flush the IO/TLB for a given protection domain
- * on every IOMMU in the system
+ * This function flushes one domain on one IOMMU
  */
-static void iommu_flush_domain(u16 domid)
+static void flush_domain_on_iommu(struct amd_iommu *iommu, u16 domid)
 {
-	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct iommu_cmd cmd;
-
-	INC_STATS_COUNTER(domain_flush_all);
+	unsigned long flags;
 
 	__iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
 				      domid, 1, 1);
 
-	for_each_iommu(iommu) {
-		spin_lock_irqsave(&iommu->lock, flags);
-		__iommu_queue_command(iommu, &cmd);
-		__iommu_completion_wait(iommu);
-		__iommu_wait_for_completion(iommu);
-		spin_unlock_irqrestore(&iommu->lock, flags);
-	}
+	spin_lock_irqsave(&iommu->lock, flags);
+	__iommu_queue_command(iommu, &cmd);
+	__iommu_completion_wait(iommu);
+	__iommu_wait_for_completion(iommu);
+	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-void amd_iommu_flush_all_domains(void)
+static void flush_all_domains_on_iommu(struct amd_iommu *iommu)
 {
 	int i;
 
 	for (i = 1; i < MAX_DOMAIN_ID; ++i) {
 		if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
 			continue;
-		iommu_flush_domain(i);
+		flush_domain_on_iommu(iommu, i);
 	}
+
+}
+
+/*
+ * This function is used to flush the IO/TLB for a given protection domain
+ * on every IOMMU in the system
+ */
+static void iommu_flush_domain(u16 domid)
+{
+	struct amd_iommu *iommu;
+
+	INC_STATS_COUNTER(domain_flush_all);
+
+	for_each_iommu(iommu)
+		flush_domain_on_iommu(iommu, domid);
+}
+
+void amd_iommu_flush_all_domains(void)
+{
+	struct amd_iommu *iommu;
+
+	for_each_iommu(iommu)
+		flush_all_domains_on_iommu(iommu);
 }
 
 void amd_iommu_flush_all_devices(void)
-- 
cgit v1.2.3


From f2430bd104bec2706315e9e983a9d9f828ff9565 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 26 Aug 2009 12:10:19 +0200
Subject: x86/amd-iommu: Remove some merge helper code

This patch removes some left-overs which where put into the code to
simplify merging code which also depends on changes in other trees.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..70fdef54e06 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -41,9 +41,7 @@ static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 static LIST_HEAD(iommu_pd_list);
 static DEFINE_SPINLOCK(iommu_pd_list_lock);
 
-#ifdef CONFIG_IOMMU_API
 static struct iommu_ops amd_iommu_ops;
-#endif
 
 /*
  * general struct to manage commands send to an IOMMU
@@ -62,10 +60,6 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
 
-#ifndef BUS_NOTIFY_UNBOUND_DRIVER
-#define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
-#endif
-
 #ifdef CONFIG_AMD_IOMMU_STATS
 
 /*
-- 
cgit v1.2.3


From 4c6f40d4e0f0bba77a5f27eec4e1c6d1c457d324 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 16:43:58 +0200
Subject: x86/amd-iommu: replace "AMD IOMMU" by "AMD-Vi"

This patch replaces the "AMD IOMMU" printk strings with the
official name for the hardware: "AMD-Vi".

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  2 +-
 arch/x86/kernel/amd_iommu.c            |  2 +-
 arch/x86/kernel/amd_iommu_init.c       | 12 ++++++------
 3 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..106e1305ef8 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -198,7 +198,7 @@ extern bool amd_iommu_dump;
 #define DUMP_printk(format, arg...)					\
 	do {								\
 		if (amd_iommu_dump)						\
-			printk(KERN_INFO "AMD IOMMU: " format, ## arg);	\
+			printk(KERN_INFO "AMD-Vi: " format, ## arg);	\
 	} while(0);
 
 /*
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 70fdef54e06..3e62d783652 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -141,7 +141,7 @@ static void iommu_print_event(void *__evt)
 	int flags = (event[1] >> EVENT_FLAGS_SHIFT) & EVENT_FLAGS_MASK;
 	u64 address = (u64)(((u64)event[3]) << 32) | event[2];
 
-	printk(KERN_ERR "AMD IOMMU: Event logged [");
+	printk(KERN_ERR "AMD-Vi: Event logged [");
 
 	switch (type) {
 	case EVENT_TYPE_ILL_DEV:
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c1b17e97252..169958ad624 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -252,7 +252,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 /* Function to enable the hardware */
 static void iommu_enable(struct amd_iommu *iommu)
 {
-	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at %s cap 0x%hx\n",
+	printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
 	       dev_name(&iommu->dev->dev), iommu->cap_ptr);
 
 	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
@@ -902,7 +902,7 @@ static int __init iommu_setup_msi(struct amd_iommu *iommu)
 
 	r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
 			IRQF_SAMPLE_RANDOM,
-			"AMD IOMMU",
+			"AMD-Vi",
 			NULL);
 
 	if (r) {
@@ -1150,7 +1150,7 @@ int __init amd_iommu_init(void)
 
 
 	if (no_iommu) {
-		printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
+		printk(KERN_INFO "AMD-Vi disabled by kernel command line\n");
 		return 0;
 	}
 
@@ -1248,16 +1248,16 @@ int __init amd_iommu_init(void)
 
 	enable_iommus();
 
-	printk(KERN_INFO "AMD IOMMU: device isolation ");
+	printk(KERN_INFO "AMD-Vi: device isolation ");
 	if (amd_iommu_isolate)
 		printk("enabled\n");
 	else
 		printk("disabled\n");
 
 	if (amd_iommu_unmap_flush)
-		printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n");
+		printk(KERN_INFO "AMD-Vi: IO/TLB flush on unmap enabled\n");
 	else
-		printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n");
+		printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
 
 out:
 	return ret;
-- 
cgit v1.2.3


From ae908c22aa2b9f7d4b41bd02d14e473f79c22dd3 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 16:52:16 +0200
Subject: x86/amd-iommu: Remove redundant 'IOMMU' string

The 'IOMMU: ' prefix is not necessary because the
DUMP_printk macro already prints its own prefix.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 169958ad624..264b3ef9dd6 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -858,7 +858,7 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 		switch (*p) {
 		case ACPI_IVHD_TYPE:
 
-			DUMP_printk("IOMMU: device: %02x:%02x.%01x cap: %04x "
+			DUMP_printk("device: %02x:%02x.%01x cap: %04x "
 				    "seg: %d flags: %01x info %04x\n",
 				    PCI_BUS(h->devid), PCI_SLOT(h->devid),
 				    PCI_FUNC(h->devid), h->cap_ptr,
-- 
cgit v1.2.3


From e0faf54ee82bf9c07f0307b4391caad4020bd659 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:45:51 +0200
Subject: x86/amd-iommu: fix broken check in amd_iommu_flush_all_devices

The amd_iommu_pd_table is indexed by protection domain
number and not by device id. So this check is broken and
must be removed.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 3e62d783652..009d722af00 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -479,8 +479,6 @@ void amd_iommu_flush_all_devices(void)
 	int i;
 
 	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (amd_iommu_pd_table[i] == NULL)
-			continue;
 
 		iommu = amd_iommu_rlookup_table[i];
 		if (!iommu)
-- 
cgit v1.2.3


From d586d7852ccd0cecb502bf4809f827e60c486af0 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:39:23 +0200
Subject: x86/amd-iommu: Add function to flush all DTEs on one IOMMU

This function flushes all DTE entries on one IOMMU for all
devices behind this IOMMU. This is required for command
buffer resetting later.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 64cc582feb9..2dc093370d2 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -516,6 +516,19 @@ void amd_iommu_flush_all_domains(void)
 		flush_all_domains_on_iommu(iommu);
 }
 
+static void flush_all_devices_for_iommu(struct amd_iommu *iommu)
+{
+	int i;
+
+	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+		if (iommu != amd_iommu_rlookup_table[i])
+			continue;
+
+		iommu_queue_inv_dev_entry(iommu, i);
+		iommu_completion_wait(iommu);
+	}
+}
+
 void amd_iommu_flush_all_devices(void)
 {
 	struct amd_iommu *iommu;
-- 
cgit v1.2.3


From 93f1cc67cf3196174412adca87321b25c1c986b0 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 14:50:20 +0200
Subject: x86/amd-iommu: Add reset function for command buffers

This patch factors parts of the command buffer
initialization code into a seperate function which can be
used to reset the command buffer later.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  3 +++
 arch/x86/kernel/amd_iommu_init.c       | 20 +++++++++++++++-----
 2 files changed, 18 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..c54bc979dc1 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -457,4 +457,7 @@ static inline void amd_iommu_stats_init(void) { }
 
 #endif /* CONFIG_AMD_IOMMU_STATS */
 
+/* some function prototypes */
+extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
+
 #endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c1b17e97252..1752afef948 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -434,6 +434,20 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 	return cmd_buf;
 }
 
+/*
+ * This function resets the command buffer if the IOMMU stopped fetching
+ * commands from it.
+ */
+void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu)
+{
+	iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
+
+	writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+	writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
+	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+}
+
 /*
  * This function writes the command buffer address to the hardware and
  * enables it.
@@ -450,11 +464,7 @@ static void iommu_enable_command_buffer(struct amd_iommu *iommu)
 	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
 		    &entry, sizeof(entry));
 
-	/* set head and tail to zero manually */
-	writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
-	writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-
-	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+	amd_iommu_reset_cmd_buffer(iommu);
 }
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
-- 
cgit v1.2.3


From a345b23b79f1900e7d87c3165182504419180de4 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:01:43 +0200
Subject: x86/amd-iommu: Reset command buffer on ILLEGAL_COMMAND_ERROR

On an ILLEGAL_COMMAND_ERROR the IOMMU stops executing
further commands. This patch changes the code to handle this
case better by resetting the command buffer in the IOMMU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 2dc093370d2..2333d615f5e 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -61,6 +61,7 @@ static u64* alloc_pte(struct protection_domain *dom,
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
+static void reset_iommu_command_buffer(struct amd_iommu *iommu);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
 #define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
@@ -156,7 +157,7 @@ static void dump_command(unsigned long phys_addr)
 		pr_err("AMD-Vi: CMD[%d]: %08x\n", i, cmd->data[i]);
 }
 
-static void iommu_print_event(void *__evt)
+static void iommu_print_event(struct amd_iommu *iommu, void *__evt)
 {
 	u32 *event = __evt;
 	int type  = (event[1] >> EVENT_TYPE_SHIFT)  & EVENT_TYPE_MASK;
@@ -195,6 +196,7 @@ static void iommu_print_event(void *__evt)
 		break;
 	case EVENT_TYPE_ILL_CMD:
 		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+		reset_iommu_command_buffer(iommu);
 		dump_command(address);
 		break;
 	case EVENT_TYPE_CMD_HARD_ERR:
@@ -229,7 +231,7 @@ static void iommu_poll_events(struct amd_iommu *iommu)
 	tail = readl(iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
 
 	while (head != tail) {
-		iommu_print_event(iommu->evt_buf + head);
+		iommu_print_event(iommu, iommu->evt_buf + head);
 		head = (head + EVENT_ENTRY_SIZE) % iommu->evt_buf_size;
 	}
 
@@ -547,6 +549,15 @@ void amd_iommu_flush_all_devices(void)
 	}
 }
 
+static void reset_iommu_command_buffer(struct amd_iommu *iommu)
+{
+	pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
+
+	amd_iommu_reset_cmd_buffer(iommu);
+	flush_all_devices_for_iommu(iommu);
+	flush_all_domains_on_iommu(iommu);
+}
+
 /****************************************************************************
  *
  * The functions below are used the create the page table mappings for
-- 
cgit v1.2.3


From b26e81b871bd18184968f0bb3f12945906eadfce Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:08:09 +0200
Subject: x86/amd-iommu: Panic if IOMMU command buffer reset fails

To prevent the driver from doing recursive command buffer
resets, just panic when that recursion happens.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h | 3 +++
 arch/x86/kernel/amd_iommu.c            | 7 +++++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index c54bc979dc1..e676746a4a3 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -337,6 +337,9 @@ struct amd_iommu {
 	/* if one, we need to send a completion wait command */
 	bool need_sync;
 
+	/* becomes true if a command buffer reset is running */
+	bool reset_in_progress;
+
 	/* default dma_ops domain for that IOMMU */
 	struct dma_ops_domain *default_dom;
 };
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 2333d615f5e..b62a2f64dfc 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -553,9 +553,16 @@ static void reset_iommu_command_buffer(struct amd_iommu *iommu)
 {
 	pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
 
+	if (iommu->reset_in_progress)
+		panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
+
+	iommu->reset_in_progress = true;
+
 	amd_iommu_reset_cmd_buffer(iommu);
 	flush_all_devices_for_iommu(iommu);
 	flush_all_domains_on_iommu(iommu);
+
+	iommu->reset_in_progress = false;
 }
 
 /****************************************************************************
-- 
cgit v1.2.3


From 6a1eddd2f951656a6abbd42e2cddc2267c4a639d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:15:10 +0200
Subject: x86/amd-iommu: Reset command buffer if wait loop fails

Instead of a panic on an comletion wait loop failure, try to
recover from that event from resetting the command buffer.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index b62a2f64dfc..cfca80bfe75 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -318,8 +318,11 @@ static void __iommu_wait_for_completion(struct amd_iommu *iommu)
 	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
 	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
 
-	if (unlikely(i == EXIT_LOOP_COUNT))
-		panic("AMD IOMMU: Completion wait loop failed\n");
+	if (unlikely(i == EXIT_LOOP_COUNT)) {
+		spin_unlock(&iommu->lock);
+		reset_iommu_command_buffer(iommu);
+		spin_lock(&iommu->lock);
+	}
 }
 
 /*
-- 
cgit v1.2.3


From 9355a08186e52b7c120adea91c984923b54efa10 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 14:24:08 +0200
Subject: x86/amd-iommu: Make fetch_pte aware of dynamic mapping levels

This patch changes the fetch_pte function in the AMD IOMMU
driver to support dynamic mapping levels.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  9 +++++++++
 arch/x86/kernel/amd_iommu.c            | 24 +++++++++++++-----------
 2 files changed, 22 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..7fce4ef77bd 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -146,12 +146,21 @@
 #define PAGE_MODE_1_LEVEL 0x01
 #define PAGE_MODE_2_LEVEL 0x02
 #define PAGE_MODE_3_LEVEL 0x03
+#define PAGE_MODE_4_LEVEL 0x04
+#define PAGE_MODE_5_LEVEL 0x05
+#define PAGE_MODE_6_LEVEL 0x06
 
 #define IOMMU_PDE_NL_0   0x000ULL
 #define IOMMU_PDE_NL_1   0x200ULL
 #define IOMMU_PDE_NL_2   0x400ULL
 #define IOMMU_PDE_NL_3   0x600ULL
 
+#define PM_LEVEL_SHIFT(x)	(12 + ((x) * 9))
+#define PM_LEVEL_SIZE(x)	(((x) < 6) ? \
+				  ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
+				   (0xffffffffffffffffULL))
+#define PM_LEVEL_INDEX(x, a)	(((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
+
 #define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
 #define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
 #define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..29bcd358b6c 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -61,6 +61,8 @@ static u64* alloc_pte(struct protection_domain *dom,
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
+static u64 *fetch_pte(struct protection_domain *domain,
+		      unsigned long address);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
 #define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
@@ -670,24 +672,24 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
  * This function checks if there is a PTE for a given dma address. If
  * there is one, it returns the pointer to it.
  */
-static u64* fetch_pte(struct protection_domain *domain,
+static u64 *fetch_pte(struct protection_domain *domain,
 		      unsigned long address)
 {
+	int level;
 	u64 *pte;
 
-	pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(address)];
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return NULL;
+	while (level > 0) {
+		if (!IOMMU_PTE_PRESENT(*pte))
+			return NULL;
 
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+		level -= 1;
 
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return NULL;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+		pte = IOMMU_PTE_PAGE(*pte);
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
+	}
 
 	return pte;
 }
-- 
cgit v1.2.3


From 38a76eeeafb251bf67d143a34b37a8105cff302e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:02:47 +0200
Subject: x86/amd-iommu: Use fetch_pte in iommu_unmap_page

Instead of reimplementing existing logic use fetch_pte to
walk the page table in iommu_unmap_page.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 29bcd358b6c..5e527989999 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -546,23 +546,10 @@ static int iommu_map_page(struct protection_domain *dom,
 static void iommu_unmap_page(struct protection_domain *dom,
 			     unsigned long bus_addr)
 {
-	u64 *pte;
-
-	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
+	u64 *pte = fetch_pte(dom, bus_addr);
 
-	*pte = 0;
+	if (pte)
+		*pte = 0;
 }
 
 /*
-- 
cgit v1.2.3


From a6d41a4027b758a9473197a78fab45afb31003aa Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:08:55 +0200
Subject: x86/amd-iommu: Use fetch_pte in amd_iommu_iova_to_phys

Don't reimplement the page table walker in this function.
Use the generic one.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 5e527989999..4a54366d422 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -2140,21 +2140,9 @@ static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
 	phys_addr_t paddr;
 	u64 *pte;
 
-	pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(iova)];
+	pte = fetch_pte(domain, iova);
 
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return 0;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(iova)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return 0;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L0_INDEX(iova)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
+	if (!pte || !IOMMU_PTE_PRESENT(*pte))
 		return 0;
 
 	paddr  = *pte & IOMMU_PAGE_MASK;
-- 
cgit v1.2.3


From 6a0dbcbe4e612fbc9d73cd4dde8ebef19295058a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 15:41:59 +0200
Subject: x86/amd-iommu: Add a gneric version of amd_iommu_flush_all_devices

This patch adds a generic variant of
amd_iommu_flush_all_devices function which flushes only the
DTEs for a given protection domain.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 4a54366d422..5265dd17eb5 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -481,13 +481,14 @@ void amd_iommu_flush_all_domains(void)
 	}
 }
 
-void amd_iommu_flush_all_devices(void)
+static void flush_devices_by_domain(struct protection_domain *domain)
 {
 	struct amd_iommu *iommu;
 	int i;
 
 	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (amd_iommu_pd_table[i] == NULL)
+		if ((domain == NULL && amd_iommu_pd_table[i] == NULL) ||
+		    (amd_iommu_pd_table[i] != domain))
 			continue;
 
 		iommu = amd_iommu_rlookup_table[i];
@@ -499,6 +500,11 @@ void amd_iommu_flush_all_devices(void)
 	}
 }
 
+void amd_iommu_flush_all_devices(void)
+{
+	flush_devices_by_domain(NULL);
+}
+
 /****************************************************************************
  *
  * The functions below are used the create the page table mappings for
-- 
cgit v1.2.3


From 407d733e30a97daf5ea6f9eb5f9ebbd42a0a9ef2 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:07:00 +0200
Subject: x86/amd-iommu: Introduce set_dte_entry function

This function factors out some logic of attach_device to a
seperate function. This new function will be used to update
device table entries when necessary.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 5265dd17eb5..0fab1f1d135 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1058,18 +1058,10 @@ static struct protection_domain *domain_for_device(u16 devid)
 	return dom;
 }
 
-/*
- * If a device is not yet associated with a domain, this function does
- * assigns it visible for the hardware
- */
-static void attach_device(struct amd_iommu *iommu,
-			  struct protection_domain *domain,
-			  u16 devid)
+static void set_dte_entry(u16 devid, struct protection_domain *domain)
 {
-	unsigned long flags;
 	u64 pte_root = virt_to_phys(domain->pt_root);
-
-	domain->dev_cnt += 1;
+	unsigned long flags;
 
 	pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
 		    << DEV_ENTRY_MODE_SHIFT;
@@ -1082,6 +1074,21 @@ static void attach_device(struct amd_iommu *iommu,
 
 	amd_iommu_pd_table[devid] = domain;
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+}
+
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
+static void attach_device(struct amd_iommu *iommu,
+			  struct protection_domain *domain,
+			  u16 devid)
+{
+	/* set the DTE entry */
+	set_dte_entry(devid, domain);
+
+	/* increase reference counter */
+	domain->dev_cnt += 1;
 
        /*
         * We might boot into a crash-kernel here. The crashed kernel
-- 
cgit v1.2.3


From 04bfdd8406099fca2e6b8844748c4d6c5eba8c8d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:00:23 +0200
Subject: x86/amd-iommu: Flush domains if address space size was increased

Thist patch introduces the update_domain function which
propagates the larger address space of a protection domain
to the device table and flushes all relevant DTEs and the
domain TLB.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  1 +
 arch/x86/kernel/amd_iommu.c            | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 7fce4ef77bd..97f3d09d3be 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -235,6 +235,7 @@ struct protection_domain {
 	int mode;		/* paging mode (0-6 levels) */
 	u64 *pt_root;		/* page table root pointer */
 	unsigned long flags;	/* flags to find out type of domain */
+	bool updated;		/* complete domain flush required */
 	unsigned dev_cnt;	/* devices assigned to this domain */
 	void *priv;		/* private data */
 };
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 0fab1f1d135..5eab6a84b9c 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -63,6 +63,7 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned int pages);
 static u64 *fetch_pte(struct protection_domain *domain,
 		      unsigned long address);
+static void update_domain(struct protection_domain *domain);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
 #define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
@@ -546,6 +547,8 @@ static int iommu_map_page(struct protection_domain *dom,
 
 	*pte = __pte;
 
+	update_domain(dom);
+
 	return 0;
 }
 
@@ -762,9 +765,13 @@ static int alloc_new_range(struct amd_iommu *iommu,
 		dma_ops_reserve_addresses(dma_dom, i << PAGE_SHIFT, 1);
 	}
 
+	update_domain(&dma_dom->domain);
+
 	return 0;
 
 out_free:
+	update_domain(&dma_dom->domain);
+
 	free_page((unsigned long)dma_dom->aperture[index]->bitmap);
 
 	kfree(dma_dom->aperture[index]);
@@ -1294,6 +1301,29 @@ static int get_device_resources(struct device *dev,
 	return 1;
 }
 
+static void update_device_table(struct protection_domain *domain)
+{
+	int i;
+
+	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+		if (amd_iommu_pd_table[i] != domain)
+			continue;
+		set_dte_entry(i, domain);
+	}
+}
+
+static void update_domain(struct protection_domain *domain)
+{
+	if (!domain->updated)
+		return;
+
+	update_device_table(domain);
+	flush_devices_by_domain(domain);
+	iommu_flush_domain(domain->id);
+
+	domain->updated = false;
+}
+
 /*
  * If the pte_page is not yet allocated this function is called
  */
@@ -1351,6 +1381,8 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
 	} else
 		pte += IOMMU_PTE_L0_INDEX(address);
 
+	update_domain(&dom->domain);
+
 	return pte;
 }
 
-- 
cgit v1.2.3


From 50020fb6324465e478d6c8cdbf3c695f0a60358d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 15:38:40 +0200
Subject: x86/amd-iommu: Introduce increase_address_space function

This function will be used to increase the address space
size of a protection domain.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  4 ++++
 arch/x86/kernel/amd_iommu.c            | 27 +++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 97f3d09d3be..1b4b3d6c9f0 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -160,6 +160,10 @@
 				  ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
 				   (0xffffffffffffffffULL))
 #define PM_LEVEL_INDEX(x, a)	(((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
+#define PM_LEVEL_ENC(x)		(((x) << 9) & 0xe00ULL)
+#define PM_LEVEL_PDE(x, a)	((a) | PM_LEVEL_ENC((x)) | \
+				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+
 
 #define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
 #define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 5eab6a84b9c..fc97b51f028 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1324,6 +1324,33 @@ static void update_domain(struct protection_domain *domain)
 	domain->updated = false;
 }
 
+/*
+ * This function is used to add another level to an IO page table. Adding
+ * another level increases the size of the address space by 9 bits to a size up
+ * to 64 bits.
+ */
+static bool increase_address_space(struct protection_domain *domain,
+				   gfp_t gfp)
+{
+	u64 *pte;
+
+	if (domain->mode == PAGE_MODE_6_LEVEL)
+		/* address space already 64 bit large */
+		return false;
+
+	pte = (void *)get_zeroed_page(gfp);
+	if (!pte)
+		return false;
+
+	*pte             = PM_LEVEL_PDE(domain->mode,
+					virt_to_phys(domain->pt_root));
+	domain->pt_root  = pte;
+	domain->mode    += 1;
+	domain->updated  = true;
+
+	return true;
+}
+
 /*
  * If the pte_page is not yet allocated this function is called
  */
-- 
cgit v1.2.3


From 8bc3e127421bf3b735edbde05135892c12c5f615 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:48:40 +0200
Subject: x86/amd-iommu: Change alloc_pte to support 64 bit address space

This patch changes the alloc_pte function to be able to map
pages into the whole 64 bit address space supported by AMD
IOMMU hardware from the old limit of 2**39 bytes.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 44 ++++++++++++++++++++------------------------
 1 file changed, 20 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index fc97b51f028..3be2b61fc31 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -55,7 +55,7 @@ struct iommu_cmd {
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e);
 static struct dma_ops_domain *find_protection_domain(u16 devid);
-static u64* alloc_pte(struct protection_domain *dom,
+static u64 *alloc_pte(struct protection_domain *domain,
 		      unsigned long address, u64
 		      **pte_page, gfp_t gfp);
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
@@ -1351,39 +1351,35 @@ static bool increase_address_space(struct protection_domain *domain,
 	return true;
 }
 
-/*
- * If the pte_page is not yet allocated this function is called
- */
-static u64* alloc_pte(struct protection_domain *dom,
+static u64 *alloc_pte(struct protection_domain *domain,
 		      unsigned long address, u64 **pte_page, gfp_t gfp)
 {
 	u64 *pte, *page;
+	int level;
 
-	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(address)];
+	while (address > PM_LEVEL_SIZE(domain->mode))
+		increase_address_space(domain, gfp);
 
-	if (!IOMMU_PTE_PRESENT(*pte)) {
-		page = (u64 *)get_zeroed_page(gfp);
-		if (!page)
-			return NULL;
-		*pte = IOMMU_L2_PDE(virt_to_phys(page));
-	}
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+	while (level > 0) {
+		if (!IOMMU_PTE_PRESENT(*pte)) {
+			page = (u64 *)get_zeroed_page(gfp);
+			if (!page)
+				return NULL;
+			*pte = PM_LEVEL_PDE(level, virt_to_phys(page));
+		}
 
-	if (!IOMMU_PTE_PRESENT(*pte)) {
-		page = (u64 *)get_zeroed_page(gfp);
-		if (!page)
-			return NULL;
-		*pte = IOMMU_L1_PDE(virt_to_phys(page));
-	}
+		level -= 1;
 
-	pte = IOMMU_PTE_PAGE(*pte);
+		pte = IOMMU_PTE_PAGE(*pte);
 
-	if (pte_page)
-		*pte_page = pte;
+		if (pte_page && level == 0)
+			*pte_page = pte;
 
-	pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
+	}
 
 	return pte;
 }
-- 
cgit v1.2.3


From 8c8c143cdc95ebe50fd962917556e25e8912997b Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:30:00 +0200
Subject: x86/amd-iommu: Remove last usages of IOMMU_PTE_L0_INDEX

This change allows to remove these old macros later.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 3be2b61fc31..ebc1c844392 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1402,7 +1402,7 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
 		pte = alloc_pte(&dom->domain, address, &pte_page, GFP_ATOMIC);
 		aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
 	} else
-		pte += IOMMU_PTE_L0_INDEX(address);
+		pte += PM_LEVEL_INDEX(0, address);
 
 	update_domain(&dom->domain);
 
@@ -1466,7 +1466,7 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 	if (!pte)
 		return;
 
-	pte += IOMMU_PTE_L0_INDEX(address);
+	pte += PM_LEVEL_INDEX(0, address);
 
 	WARN_ON(!*pte);
 
-- 
cgit v1.2.3


From bad1cac28a707c69301a4d0612da9ccbecd51953 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:52:23 +0200
Subject: x86/amd-iommu: Remove bus_addr check in iommu_map_page

The driver now supports full 64 bit device address spaces.
So this check is not longer required.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index ebc1c844392..6ffb3e63765 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -530,8 +530,7 @@ static int iommu_map_page(struct protection_domain *dom,
 	bus_addr  = PAGE_ALIGN(bus_addr);
 	phys_addr = PAGE_ALIGN(phys_addr);
 
-	/* only support 512GB address spaces for now */
-	if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
+	if (!(prot & IOMMU_PROT_MASK))
 		return -EINVAL;
 
 	pte = alloc_pte(dom, bus_addr, NULL, GFP_KERNEL);
-- 
cgit v1.2.3


From 8f7a017ce05ed4522809448e169daa44fe6edeb1 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:55:24 +0200
Subject: x86/amd-iommu: Use 2-level page tables for dma_ops domains

The driver now supports a dynamic number of levels for IO
page tables. This allows to reduce the number of levels for
dma_ops domains by one because a dma_ops domain has usually
an address space size between 128MB and 4G.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6ffb3e63765..addf6588c36 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1010,7 +1010,7 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu)
 	dma_dom->domain.id = domain_id_alloc();
 	if (dma_dom->domain.id == 0)
 		goto free_dma_dom;
-	dma_dom->domain.mode = PAGE_MODE_3_LEVEL;
+	dma_dom->domain.mode = PAGE_MODE_2_LEVEL;
 	dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
 	dma_dom->domain.flags = PD_DMA_OPS_MASK;
 	dma_dom->domain.priv = dma_dom;
-- 
cgit v1.2.3


From 674d798a80cb6ea1defa01899099f40d9124423c Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:26:09 +0200
Subject: x86/amd-iommu: Remove old page table handling macros

These macros are not longer required. So remove them.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h | 19 -------------------
 1 file changed, 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 1b4b3d6c9f0..d66430de5f7 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -150,11 +150,6 @@
 #define PAGE_MODE_5_LEVEL 0x05
 #define PAGE_MODE_6_LEVEL 0x06
 
-#define IOMMU_PDE_NL_0   0x000ULL
-#define IOMMU_PDE_NL_1   0x200ULL
-#define IOMMU_PDE_NL_2   0x400ULL
-#define IOMMU_PDE_NL_3   0x600ULL
-
 #define PM_LEVEL_SHIFT(x)	(12 + ((x) * 9))
 #define PM_LEVEL_SIZE(x)	(((x) < 6) ? \
 				  ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
@@ -164,15 +159,6 @@
 #define PM_LEVEL_PDE(x, a)	((a) | PM_LEVEL_ENC((x)) | \
 				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
 
-
-#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
-#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
-#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
-
-#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
-#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
-#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
-
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
 #define IOMMU_PTE_U  (1ULL << 59)
@@ -180,11 +166,6 @@
 #define IOMMU_PTE_IR (1ULL << 61)
 #define IOMMU_PTE_IW (1ULL << 62)
 
-#define IOMMU_L1_PDE(address) \
-	((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-#define IOMMU_L2_PDE(address) \
-	((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-
 #define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
 #define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
 #define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
-- 
cgit v1.2.3


From a6b256b41357c33ccb2d105a4457e22bdc83e021 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 12:21:31 +0200
Subject: x86/amd-iommu: Support higher level PTEs in iommu_page_unmap

This patch changes fetch_pte and iommu_page_unmap to support
different page sizes too.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  1 +
 arch/x86/kernel/amd_iommu.c            | 21 +++++++++++++--------
 2 files changed, 14 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index d66430de5f7..351ca39ece0 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -158,6 +158,7 @@
 #define PM_LEVEL_ENC(x)		(((x) << 9) & 0xe00ULL)
 #define PM_LEVEL_PDE(x, a)	((a) | PM_LEVEL_ENC((x)) | \
 				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+#define PM_PTE_LEVEL(pte)	(((pte) >> 9) & 0x7ULL)
 
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index addf6588c36..002cf9cab9e 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -62,7 +62,7 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
 static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address);
+		      unsigned long address, int map_size);
 static void update_domain(struct protection_domain *domain);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
@@ -552,9 +552,9 @@ static int iommu_map_page(struct protection_domain *dom,
 }
 
 static void iommu_unmap_page(struct protection_domain *dom,
-			     unsigned long bus_addr)
+			     unsigned long bus_addr, int map_size)
 {
-	u64 *pte = fetch_pte(dom, bus_addr);
+	u64 *pte = fetch_pte(dom, bus_addr, map_size);
 
 	if (pte)
 		*pte = 0;
@@ -668,7 +668,7 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
  * there is one, it returns the pointer to it.
  */
 static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address)
+		      unsigned long address, int map_size)
 {
 	int level;
 	u64 *pte;
@@ -676,7 +676,7 @@ static u64 *fetch_pte(struct protection_domain *domain,
 	level =  domain->mode - 1;
 	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	while (level > 0) {
+	while (level > map_size) {
 		if (!IOMMU_PTE_PRESENT(*pte))
 			return NULL;
 
@@ -684,6 +684,11 @@ static u64 *fetch_pte(struct protection_domain *domain,
 
 		pte = IOMMU_PTE_PAGE(*pte);
 		pte = &pte[PM_LEVEL_INDEX(level, address)];
+
+		if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
+			pte = NULL;
+			break;
+		}
 	}
 
 	return pte;
@@ -757,7 +762,7 @@ static int alloc_new_range(struct amd_iommu *iommu,
 	for (i = dma_dom->aperture[index]->offset;
 	     i < dma_dom->aperture_size;
 	     i += PAGE_SIZE) {
-		u64 *pte = fetch_pte(&dma_dom->domain, i);
+		u64 *pte = fetch_pte(&dma_dom->domain, i, PM_MAP_4k);
 		if (!pte || !IOMMU_PTE_PRESENT(*pte))
 			continue;
 
@@ -2192,7 +2197,7 @@ static void amd_iommu_unmap_range(struct iommu_domain *dom,
 	iova  &= PAGE_MASK;
 
 	for (i = 0; i < npages; ++i) {
-		iommu_unmap_page(domain, iova);
+		iommu_unmap_page(domain, iova, PM_MAP_4k);
 		iova  += PAGE_SIZE;
 	}
 
@@ -2207,7 +2212,7 @@ static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
 	phys_addr_t paddr;
 	u64 *pte;
 
-	pte = fetch_pte(domain, iova);
+	pte = fetch_pte(domain, iova, PM_MAP_4k);
 
 	if (!pte || !IOMMU_PTE_PRESENT(*pte))
 		return 0;
-- 
cgit v1.2.3


From abdc5eb3d69279039ba6cb89719913d08013ab14 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 11:33:51 +0200
Subject: x86/amd-iommu: Change iommu_map_page to support multiple page sizes

This patch adds a map_size parameter to the iommu_map_page
function which makes it generic enough to handle multiple
page sizes. This also requires a change to alloc_pte which
is also done in this patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  6 ++++++
 arch/x86/kernel/amd_iommu.c            | 31 ++++++++++++++++++++-----------
 2 files changed, 26 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 351ca39ece0..9e8bb9746dc 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -160,6 +160,12 @@
 				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
 #define PM_PTE_LEVEL(pte)	(((pte) >> 9) & 0x7ULL)
 
+#define PM_MAP_4k		0
+#define PM_ADDR_MASK		0x000ffffffffff000ULL
+#define PM_MAP_MASK(lvl)	(PM_ADDR_MASK & \
+				(~((1ULL << (12 + ((lvl) * 9))) - 1)))
+#define PM_ALIGNED(lvl, addr)	((PM_MAP_MASK(lvl) & (addr)) == (addr))
+
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
 #define IOMMU_PTE_U  (1ULL << 59)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 002cf9cab9e..45be9499c97 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -56,8 +56,8 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e);
 static struct dma_ops_domain *find_protection_domain(u16 devid);
 static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address, u64
-		      **pte_page, gfp_t gfp);
+		      unsigned long address, int end_lvl,
+		      u64 **pte_page, gfp_t gfp);
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
@@ -523,17 +523,21 @@ void amd_iommu_flush_all_devices(void)
 static int iommu_map_page(struct protection_domain *dom,
 			  unsigned long bus_addr,
 			  unsigned long phys_addr,
-			  int prot)
+			  int prot,
+			  int map_size)
 {
 	u64 __pte, *pte;
 
 	bus_addr  = PAGE_ALIGN(bus_addr);
 	phys_addr = PAGE_ALIGN(phys_addr);
 
+	BUG_ON(!PM_ALIGNED(map_size, bus_addr));
+	BUG_ON(!PM_ALIGNED(map_size, phys_addr));
+
 	if (!(prot & IOMMU_PROT_MASK))
 		return -EINVAL;
 
-	pte = alloc_pte(dom, bus_addr, NULL, GFP_KERNEL);
+	pte = alloc_pte(dom, bus_addr, map_size, NULL, GFP_KERNEL);
 
 	if (IOMMU_PTE_PRESENT(*pte))
 		return -EBUSY;
@@ -612,7 +616,8 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 
 	for (addr = e->address_start; addr < e->address_end;
 	     addr += PAGE_SIZE) {
-		ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot);
+		ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot,
+				     PM_MAP_4k);
 		if (ret)
 			return ret;
 		/*
@@ -729,7 +734,7 @@ static int alloc_new_range(struct amd_iommu *iommu,
 		u64 *pte, *pte_page;
 
 		for (i = 0; i < num_ptes; ++i) {
-			pte = alloc_pte(&dma_dom->domain, address,
+			pte = alloc_pte(&dma_dom->domain, address, PM_MAP_4k,
 					&pte_page, gfp);
 			if (!pte)
 				goto out_free;
@@ -1356,7 +1361,10 @@ static bool increase_address_space(struct protection_domain *domain,
 }
 
 static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address, u64 **pte_page, gfp_t gfp)
+		      unsigned long address,
+		      int end_lvl,
+		      u64 **pte_page,
+		      gfp_t gfp)
 {
 	u64 *pte, *page;
 	int level;
@@ -1367,7 +1375,7 @@ static u64 *alloc_pte(struct protection_domain *domain,
 	level =  domain->mode - 1;
 	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	while (level > 0) {
+	while (level > end_lvl) {
 		if (!IOMMU_PTE_PRESENT(*pte)) {
 			page = (u64 *)get_zeroed_page(gfp);
 			if (!page)
@@ -1379,7 +1387,7 @@ static u64 *alloc_pte(struct protection_domain *domain,
 
 		pte = IOMMU_PTE_PAGE(*pte);
 
-		if (pte_page && level == 0)
+		if (pte_page && level == end_lvl)
 			*pte_page = pte;
 
 		pte = &pte[PM_LEVEL_INDEX(level, address)];
@@ -1403,7 +1411,8 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
 
 	pte = aperture->pte_pages[APERTURE_PAGE_INDEX(address)];
 	if (!pte) {
-		pte = alloc_pte(&dom->domain, address, &pte_page, GFP_ATOMIC);
+		pte = alloc_pte(&dom->domain, address, PM_MAP_4k, &pte_page,
+				GFP_ATOMIC);
 		aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
 	} else
 		pte += PM_LEVEL_INDEX(0, address);
@@ -2176,7 +2185,7 @@ static int amd_iommu_map_range(struct iommu_domain *dom,
 	paddr &= PAGE_MASK;
 
 	for (i = 0; i < npages; ++i) {
-		ret = iommu_map_page(domain, iova, paddr, prot);
+		ret = iommu_map_page(domain, iova, paddr, prot, PM_MAP_4k);
 		if (ret)
 			return ret;
 
-- 
cgit v1.2.3


From ac0101d396fee24994632f71b55b9f7f9ee16eff Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 16:00:35 +0200
Subject: x86/dma: Mark iommu_pass_through as __read_mostly

This variable is read most of the time. This patch marks it
as such. It also documents the meaning the this variable
while at it.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/pci-dma.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..873aa079d16 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -32,7 +32,14 @@ int no_iommu __read_mostly;
 /* Set this to 1 if there is a HW IOMMU in the system */
 int iommu_detected __read_mostly = 0;
 
-int iommu_pass_through;
+/*
+ * This variable becomes 1 if iommu=pt is passed on the kernel command line.
+ * If this variable is 1, IOMMU implementations do no DMA ranslation for
+ * devices and allow every device to access to whole physical memory. This is
+ * useful if a user want to use an IOMMU only for KVM device assignment to
+ * guests and not for driver dma translation.
+ */
+int iommu_pass_through __read_mostly;
 
 dma_addr_t bad_dma_address __read_mostly = 0;
 EXPORT_SYMBOL(bad_dma_address);
-- 
cgit v1.2.3


From 2650815fb03fe2bf1e6701584087ba669dcf92cd Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 26 Aug 2009 16:52:40 +0200
Subject: x86/amd-iommu: Add core functions for pd allocation/freeing

This patch factors some code of protection domain allocation
into seperate functions. This way the logic can be used to
allocate the passthrough domain later. As a side effect this
patch fixes an unlikely domain id leakage bug.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 36 ++++++++++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..0934348abfa 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1988,19 +1988,47 @@ static void cleanup_domain(struct protection_domain *domain)
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
 
-static int amd_iommu_domain_init(struct iommu_domain *dom)
+static void protection_domain_free(struct protection_domain *domain)
+{
+	if (!domain)
+		return;
+
+	if (domain->id)
+		domain_id_free(domain->id);
+
+	kfree(domain);
+}
+
+static struct protection_domain *protection_domain_alloc(void)
 {
 	struct protection_domain *domain;
 
 	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
 	if (!domain)
-		return -ENOMEM;
+		return NULL;
 
 	spin_lock_init(&domain->lock);
-	domain->mode = PAGE_MODE_3_LEVEL;
 	domain->id = domain_id_alloc();
 	if (!domain->id)
+		goto out_err;
+
+	return domain;
+
+out_err:
+	kfree(domain);
+
+	return NULL;
+}
+
+static int amd_iommu_domain_init(struct iommu_domain *dom)
+{
+	struct protection_domain *domain;
+
+	domain = protection_domain_alloc();
+	if (!domain)
 		goto out_free;
+
+	domain->mode    = PAGE_MODE_3_LEVEL;
 	domain->pt_root = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!domain->pt_root)
 		goto out_free;
@@ -2010,7 +2038,7 @@ static int amd_iommu_domain_init(struct iommu_domain *dom)
 	return 0;
 
 out_free:
-	kfree(domain);
+	protection_domain_free(domain);
 
 	return -ENOMEM;
 }
-- 
cgit v1.2.3


From 0feae533ddebe02cda6ccce5cac7349b446776a8 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 26 Aug 2009 15:26:30 +0200
Subject: x86/amd-iommu: Add passthrough mode initialization functions

When iommu=pt is passed on kernel command line the devices
should run untranslated. This requires the allocation of a
special domain for that purpose. This patch implements the
allocation and initialization path for iommu=pt.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu.h       |  1 +
 arch/x86/include/asm/amd_iommu_types.h |  4 ++
 arch/x86/kernel/amd_iommu.c            | 72 ++++++++++++++++++++++++++++++----
 3 files changed, 69 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index bdf96f119f0..ac95995b7ba 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -25,6 +25,7 @@
 #ifdef CONFIG_AMD_IOMMU
 extern int amd_iommu_init(void);
 extern int amd_iommu_init_dma_ops(void);
+extern int amd_iommu_init_passthrough(void);
 extern void amd_iommu_detect(void);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
 extern void amd_iommu_flush_all_domains(void);
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..49f7453bff7 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -143,6 +143,7 @@
 #define EVT_BUFFER_SIZE		8192 /* 512 entries */
 #define EVT_LEN_MASK		(0x9ULL << 56)
 
+#define PAGE_MODE_NONE    0x00
 #define PAGE_MODE_1_LEVEL 0x01
 #define PAGE_MODE_2_LEVEL 0x02
 #define PAGE_MODE_3_LEVEL 0x03
@@ -194,6 +195,9 @@
 #define PD_DMA_OPS_MASK		(1UL << 0) /* domain used for dma_ops */
 #define PD_DEFAULT_MASK		(1UL << 1) /* domain is a default dma_ops
 					      domain for an IOMMU */
+#define PD_PASSTHROUGH_MASK	(1UL << 2) /* domain has no page
+					      translation */
+
 extern bool amd_iommu_dump;
 #define DUMP_printk(format, arg...)					\
 	do {								\
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 0934348abfa..7987f20499a 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -41,6 +41,12 @@ static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 static LIST_HEAD(iommu_pd_list);
 static DEFINE_SPINLOCK(iommu_pd_list_lock);
 
+/*
+ * Domain for untranslated devices - only allocated
+ * if iommu=pt passed on kernel cmd line.
+ */
+static struct protection_domain *pt_domain;
+
 #ifdef CONFIG_IOMMU_API
 static struct iommu_ops amd_iommu_ops;
 #endif
@@ -1067,9 +1073,9 @@ static struct protection_domain *domain_for_device(u16 devid)
  * If a device is not yet associated with a domain, this function does
  * assigns it visible for the hardware
  */
-static void attach_device(struct amd_iommu *iommu,
-			  struct protection_domain *domain,
-			  u16 devid)
+static void __attach_device(struct amd_iommu *iommu,
+			    struct protection_domain *domain,
+			    u16 devid)
 {
 	unsigned long flags;
 	u64 pte_root = virt_to_phys(domain->pt_root);
@@ -1087,12 +1093,19 @@ static void attach_device(struct amd_iommu *iommu,
 
 	amd_iommu_pd_table[devid] = domain;
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+}
 
-       /*
-        * We might boot into a crash-kernel here. The crashed kernel
-        * left the caches in the IOMMU dirty. So we have to flush
-        * here to evict all dirty stuff.
-        */
+static void attach_device(struct amd_iommu *iommu,
+			  struct protection_domain *domain,
+			  u16 devid)
+{
+	__attach_device(iommu, domain, devid);
+
+	/*
+	 * We might boot into a crash-kernel here. The crashed kernel
+	 * left the caches in the IOMMU dirty. So we have to flush
+	 * here to evict all dirty stuff.
+	 */
 	iommu_queue_inv_dev_entry(iommu, devid);
 	iommu_flush_tlb_pde(iommu, domain->id);
 }
@@ -2219,3 +2232,46 @@ static struct iommu_ops amd_iommu_ops = {
 	.domain_has_cap = amd_iommu_domain_has_cap,
 };
 
+/*****************************************************************************
+ *
+ * The next functions do a basic initialization of IOMMU for pass through
+ * mode
+ *
+ * In passthrough mode the IOMMU is initialized and enabled but not used for
+ * DMA-API translation.
+ *
+ *****************************************************************************/
+
+int __init amd_iommu_init_passthrough(void)
+{
+	struct pci_dev *dev = NULL;
+	u16 devid, devid2;
+
+	/* allocate passthroug domain */
+	pt_domain = protection_domain_alloc();
+	if (!pt_domain)
+		return -ENOMEM;
+
+	pt_domain->mode |= PAGE_MODE_NONE;
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		struct amd_iommu *iommu;
+
+		devid = calc_devid(dev->bus->number, dev->devfn);
+		if (devid > amd_iommu_last_bdf)
+			continue;
+
+		devid2 = amd_iommu_alias_table[devid];
+
+		iommu = amd_iommu_rlookup_table[devid2];
+		if (!iommu)
+			continue;
+
+		__attach_device(iommu, pt_domain, devid);
+		__attach_device(iommu, pt_domain, devid2);
+	}
+
+	pr_info("AMD-Vi: Initialized for Passthrough Mode\n");
+
+	return 0;
+}
-- 
cgit v1.2.3


From aa879fff5d12318259816aa35023e941a1e4d3d9 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 31 Aug 2009 16:01:48 +0200
Subject: x86/amd-iommu: Fix device table write order

The V bit of the device table entry has to be set after the
rest of the entry is written to not confuse the hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 7987f20499a..2b1e77c714f 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1087,9 +1087,9 @@ static void __attach_device(struct amd_iommu *iommu,
 	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
 
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
-	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
 	amd_iommu_dev_table[devid].data[2] = domain->id;
+	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
+	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
 
 	amd_iommu_pd_table[devid] = domain;
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
-- 
cgit v1.2.3


From eba6ac60ba66c6bf6858938442204feaa67dea31 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 12:07:08 +0200
Subject: x86/amd-iommu: Align locking between attach_device and detach_device

This patch makes the locking behavior between the functions
attach_device and __attach_device consistent with the
locking behavior between detach_device and __detach_device.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 2b1e77c714f..9aa135d4453 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1077,29 +1077,38 @@ static void __attach_device(struct amd_iommu *iommu,
 			    struct protection_domain *domain,
 			    u16 devid)
 {
-	unsigned long flags;
-	u64 pte_root = virt_to_phys(domain->pt_root);
+	u64 pte_root;
 
-	domain->dev_cnt += 1;
+	/* lock domain */
+	spin_lock(&domain->lock);
+
+	pte_root = virt_to_phys(domain->pt_root);
 
 	pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
 		    << DEV_ENTRY_MODE_SHIFT;
 	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
 
-	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 	amd_iommu_dev_table[devid].data[2] = domain->id;
 	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
 	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
 
 	amd_iommu_pd_table[devid] = domain;
-	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	domain->dev_cnt += 1;
+
+	/* ready */
+	spin_unlock(&domain->lock);
 }
 
 static void attach_device(struct amd_iommu *iommu,
 			  struct protection_domain *domain,
 			  u16 devid)
 {
+	unsigned long flags;
+
+	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 	__attach_device(iommu, domain, devid);
+	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 
 	/*
 	 * We might boot into a crash-kernel here. The crashed kernel
-- 
cgit v1.2.3


From 21129f786f231f7a9dce5b504617b893f50a435f Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 11:59:42 +0200
Subject: x86/amd-iommu: Make sure a device is assigned in passthrough mode

When the IOMMU driver runs in passthrough mode it has to
make sure that every device not assigned to an IOMMU-API
domain must be put into the passthrough domain instead of
keeping it unassigned.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9aa135d4453..a8e74c34dd2 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1141,6 +1141,15 @@ static void __detach_device(struct protection_domain *domain, u16 devid)
 
 	/* ready */
 	spin_unlock(&domain->lock);
+
+	/*
+	 * If we run in passthrough mode the device must be assigned to the
+	 * passthrough domain if it is detached from any other domain
+	 */
+	if (iommu_pass_through) {
+		struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+		__attach_device(iommu, pt_domain, devid);
+	}
 }
 
 /*
-- 
cgit v1.2.3


From a1ca331c8aa75cd58fdf685e2e8745e1d3ec5c8f Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 12:22:22 +0200
Subject: x86/amd-iommu: Don't detach device from pt domain on driver unbind

This patch makes sure a device is not detached from the
passthrough domain when the device driver is unloaded or
does otherwise release the device.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index a8e74c34dd2..12a541deae5 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1195,6 +1195,8 @@ static int device_change_notifier(struct notifier_block *nb,
 	case BUS_NOTIFY_UNBOUND_DRIVER:
 		if (!domain)
 			goto out;
+		if (iommu_pass_through)
+			break;
 		detach_device(domain, devid);
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:
-- 
cgit v1.2.3


From 4751a95134e05f1172131d2001c6991d671fa58c Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 15:53:54 +0200
Subject: x86/amd-iommu: Initialize passthrough mode when requested

This patch enables the passthrough mode for AMD IOMMU by
running the initialization function when iommu=pt is passed
on the kernel command line.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu_init.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c1b17e97252..f00f489ab15 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -1242,12 +1242,18 @@ int __init amd_iommu_init(void)
 	if (ret)
 		goto free;
 
-	ret = amd_iommu_init_dma_ops();
+	if (iommu_pass_through)
+		ret = amd_iommu_init_passthrough();
+	else
+		ret = amd_iommu_init_dma_ops();
 	if (ret)
 		goto free;
 
 	enable_iommus();
 
+	if (iommu_pass_through)
+		goto out;
+
 	printk(KERN_INFO "AMD IOMMU: device isolation ");
 	if (amd_iommu_isolate)
 		printk("enabled\n");
-- 
cgit v1.2.3


From 6ac162d6c01ac7626f46c68c0770556cf682ce34 Mon Sep 17 00:00:00 2001
From: Pavel Vasilyev <pavel@pavlinux.ru>
Date: Thu, 3 Sep 2009 16:20:55 +0200
Subject: x86/gart: Do not select AGP for GART_IOMMU

There is no dependency from the gart code to the agp code.
And since a lot of systems today do not have agp anymore
remove this dependency from the kernel configuration.

Signed-off-by: Pavel Vasilyev <pavel@pavlinux.ru>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 13ffa5df37d..1d9c18aa17e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -586,7 +586,6 @@ config GART_IOMMU
 	bool "GART IOMMU support" if EMBEDDED
 	default y
 	select SWIOTLB
-	select AGP
 	depends on X86_64 && PCI
 	---help---
 	  Support for full DMA access of devices with 32bit memory access only
-- 
cgit v1.2.3


From 5d113262ee9e074e0d36362d878892819bfdeb47 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:13:53 +0300
Subject: OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups.

At the end of the list pd is a pointer to a NULL struct, so checking
if the address == NULL doesn't help here. In fact the original code
will just keep running past the struct to read who knows what in
memory.

This case manifests itself when from clkdms_setup() when enabling auto
idle for a clock domain and the clockdomain usecount is greater than
0. When _clkdm_add_autodeps() tries to add the a dependency that does
not exist in the powerdomain->wkdep_srcs array the for loop will run
past the wkdep_srcs array.

Currently in linux-omap you won't hit this because the not found case
is never executed, unless you start modifying powerdomains and their
wakeup/sleep deps.

Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/powerdomain.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 983f1cb676b..66206b6357f 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -83,7 +83,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 	if (!pwrdm || !deps || !omap_chip_is(pwrdm->omap_chip))
 		return ERR_PTR(-EINVAL);
 
-	for (pd = deps; pd; pd++) {
+	for (pd = deps; pd->pwrdm_name; pd++) {
 
 		if (!omap_chip_is(pd->omap_chip))
 			continue;
@@ -96,7 +96,7 @@ static struct powerdomain *_pwrdm_deps_lookup(struct powerdomain *pwrdm,
 
 	}
 
-	if (!pd)
+	if (!pd->pwrdm_name)
 		return ERR_PTR(-ENOENT);
 
 	return pd->pwrdm;
-- 
cgit v1.2.3


From 6dda2d4b1306c19e39496e9bb305424d1d547013 Mon Sep 17 00:00:00 2001
From: Tero Kristo <tero.kristo@nokia.com>
Date: Thu, 3 Sep 2009 20:13:56 +0300
Subject: OMAP: SDRC: Add several new register definitions

Add missing SDRC register offset macros.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
[paul@pwsan.com: added commit message]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/include/mach/sdrc.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 93f70d2cbce..1c09c78a48f 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -21,19 +21,28 @@
 /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
 
 #define SDRC_SYSCONFIG		0x010
+#define SDRC_CS_CFG		0x040
+#define SDRC_SHARING		0x044
+#define SDRC_ERR_TYPE		0x04C
 #define SDRC_DLLA_CTRL		0x060
 #define SDRC_DLLA_STATUS	0x064
 #define SDRC_DLLB_CTRL		0x068
 #define SDRC_DLLB_STATUS	0x06C
 #define SDRC_POWER		0x070
+#define SDRC_MCFG_0		0x080
 #define SDRC_MR_0		0x084
+#define SDRC_EMR2_0		0x08c
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MANUAL_0		0x0a8
+#define SDRC_MCFG_1		0x0B0
 #define SDRC_MR_1		0x0B4
+#define SDRC_EMR2_1		0x0BC
 #define SDRC_ACTIM_CTRL_A_1	0x0C4
 #define SDRC_ACTIM_CTRL_B_1	0x0C8
 #define SDRC_RFR_CTRL_1		0x0D4
+#define SDRC_MANUAL_1		0x0D8
 
 /*
  * These values represent the number of memory clock cycles between
-- 
cgit v1.2.3


From 11b66383aa722a3321d2aeec09808c5b140ad396 Mon Sep 17 00:00:00 2001
From: Sanjeev Premi <premi@ti.com>
Date: Thu, 3 Sep 2009 20:13:58 +0300
Subject: OMAP3 clock: Fixed processing of bootarg 'mpurate'

The argument 'mpurate' had no effect on the MPU
frequency. This patch fixes the same.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock34xx.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index cd7819cc0c9..fafcd32e690 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -27,6 +27,7 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
+#include <mach/cpu.h>
 #include <mach/clock.h>
 #include <mach/sram.h>
 #include <asm/div64.h>
@@ -1067,17 +1068,17 @@ static int __init omap2_clk_arch_init(void)
 		return -EINVAL;
 
 	/* REVISIT: not yet ready for 343x */
-#if 0
-	if (clk_set_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-#endif
+	if (clk_set_rate(&dpll1_ck, mpurate))
+		printk(KERN_ERR "*** Unable to set MPU rate\n");
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
+	       (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
+
+	calibrate_delay();
 
 	return 0;
 }
@@ -1136,7 +1137,7 @@ int __init omap2_clk_init(void)
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
+	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
 	       "%ld.%01ld/%ld/%ld MHz\n",
 	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
 	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
-- 
cgit v1.2.3


From 19f4d3a90bf2815cb97b66e603b5e0311d234458 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:00 +0300
Subject: OMAP clock: associate MPU clocks with the mpu_clkdm

All MPU-related clocks should be in the mpu_clkdm.  This is needed for the
upcoming omap_hwmod patches, which needs to know the clockdomain that arm_fck
is in.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock34xx.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 57cc2725b92..9a823c341b7 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1020,6 +1020,7 @@ static struct clk arm_fck = {
 	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
 	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
 	.clksel		= arm_fck_clksel,
+	.clkdm_name	= "mpu_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
 
-- 
cgit v1.2.3


From 08e3d5f28d4d696dc559898676019cbd36501025 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:00 +0300
Subject: OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm

omap2_init_clk_clkdm() is called as part of the chip architecture-specific
initialization code, so calling it again from the struct clk init pointer
just wastes cycles.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clock34xx.h | 20 --------------------
 1 file changed, 20 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9a823c341b7..c8119781e00 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1156,7 +1156,6 @@ static struct clk gfx_cg1_ck = {
 	.name		= "gfx_cg1_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1167,7 +1166,6 @@ static struct clk gfx_cg2_ck = {
 	.name		= "gfx_cg2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
 	.clkdm_name	= "gfx_3430es1_clkdm",
@@ -1211,7 +1209,6 @@ static struct clk sgx_ick = {
 	.name		= "sgx_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
 	.clkdm_name	= "sgx_clkdm",
@@ -1224,7 +1221,6 @@ static struct clk d2d_26m_fck = {
 	.name		= "d2d_26m_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1235,7 +1231,6 @@ static struct clk modem_fck = {
 	.name		= "modem_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
 	.clkdm_name	= "d2d_clkdm",
@@ -1623,7 +1618,6 @@ static struct clk core_l3_ick = {
 	.name		= "core_l3_ick",
 	.ops		= &clkops_null,
 	.parent		= &l3_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l3_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -1692,7 +1686,6 @@ static struct clk core_l4_ick = {
 	.name		= "core_l4_ick",
 	.ops		= &clkops_null,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2090,7 +2083,6 @@ static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_54m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2101,7 +2093,6 @@ static struct clk dss_96m_fck = {
 	.name		= "dss_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &omap_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_TV_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2112,7 +2103,6 @@ static struct clk dss2_alwon_fck = {
 	.name		= "dss2_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &sys_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2124,7 +2114,6 @@ static struct clk dss_ick_3430es1 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2136,7 +2125,6 @@ static struct clk dss_ick_3430es2 = {
 	.name		= "dss_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
 	.clkdm_name	= "dss_clkdm",
@@ -2160,7 +2148,6 @@ static struct clk cam_ick = {
 	.name		= "cam_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2171,7 +2158,6 @@ static struct clk csi2_96m_fck = {
 	.name		= "csi2_96m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &core_96m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
 	.clkdm_name	= "cam_clkdm",
@@ -2184,7 +2170,6 @@ static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll5_m2_ck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2195,7 +2180,6 @@ static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2207,7 +2191,6 @@ static struct clk usbhost_ick = {
 	.name		= "usbhost_ick",
 	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
-	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
 	.clkdm_name	= "usbhost_clkdm",
@@ -2269,7 +2252,6 @@ static struct clk gpt1_fck = {
 static struct clk wkup_32k_fck = {
 	.name		= "wkup_32k_fck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clk_clkdm,
 	.parent		= &omap_32k_fck,
 	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
@@ -2384,7 +2366,6 @@ static struct clk per_96m_fck = {
 	.name		= "per_96m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_96m_alwon_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
@@ -2393,7 +2374,6 @@ static struct clk per_48m_fck = {
 	.name		= "per_48m_fck",
 	.ops		= &clkops_null,
 	.parent		= &omap_48m_fck,
-	.init		= &omap2_init_clk_clkdm,
 	.clkdm_name	= "per_clkdm",
 	.recalc		= &followparent_recalc,
 };
-- 
cgit v1.2.3


From c0407a96d04794be586eab4a412320079446cf93 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:01 +0300
Subject: OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM
 no-op layer
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The interface provides device drivers, CPUFreq, and DSPBridge with a
means of controlling OMAP power management parameters that are not yet
supported by the Linux PM PMQoS interface.  Copious documentation is
in the patch in Documentation/arm/OMAP/omap_pm and the interface
header file, arch/arm/plat-omap/include/mach/omap-pm.h.

Thanks to Rajendra Nayak <rnayak@ti.com> for adding CORE (VDD2) OPP
support and moving the OPP table initialization earlier in the event
that the clock code needs them.  Thanks to Tero Kristo
<tero.kristo@nokia.com> for fixing the parameter check in
omap_pm_set_min_bus_tput().  Jouni signed off on Tero's patch.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Jouni Högander <jouni.hogander@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Igor Stoppa <igor.stoppa@nokia.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Veeramanikandan Raju <veera@ti.com>
Cc: Karthik Dasu <karthik-dp@ti.com>
---
 arch/arm/mach-omap2/io.c                  |   4 +
 arch/arm/plat-omap/Kconfig                |  13 ++
 arch/arm/plat-omap/Makefile               |   1 +
 arch/arm/plat-omap/include/mach/omap-pm.h | 301 ++++++++++++++++++++++++++++++
 arch/arm/plat-omap/omap-pm-noop.c         | 296 +++++++++++++++++++++++++++++
 5 files changed, 615 insertions(+)
 create mode 100644 arch/arm/plat-omap/include/mach/omap-pm.h
 create mode 100644 arch/arm/plat-omap/omap-pm-noop.c

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e9b9bcb19b4..4bfe873e1b8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -36,6 +36,7 @@
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
+#include <mach/omap-pm.h>
 #include <mach/powerdomain.h>
 
 #include "powerdomains.h"
@@ -281,9 +282,12 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 {
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
+	/* The OPP tables have to be registered before a clk init */
+	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
 #endif
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ab9f9efc9b6..64b3f52bd9b 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -187,6 +187,19 @@ config OMAP_SERIAL_WAKE
 	  to data on the serial RX line. This allows you to wake the
 	  system from serial console.
 
+choice
+	prompt "OMAP PM layer selection"
+	depends on ARCH_OMAP
+	default OMAP_PM_NOOP
+
+config OMAP_PM_NONE
+	bool "No PM layer"
+
+config OMAP_PM_NOOP
+	bool "No-op/debug PM layer"
+
+endchoice
+
 endmenu
 
 endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 769a4c20036..5e10d0a2eb8 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -26,3 +26,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
\ No newline at end of file
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/mach/omap-pm.h
new file mode 100644
index 00000000000..3ee41d71149
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-pm.h
@@ -0,0 +1,301 @@
+/*
+ * omap-pm.h - OMAP power management interface
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
+ * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
+ * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
+ * Richard Woodruff
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
+#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
+
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+
+#include "powerdomain.h"
+
+/**
+ * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
+ * @rate: target clock rate
+ * @opp_id: OPP ID
+ * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
+ *
+ * Operating performance point data.  Can vary by OMAP chip and board.
+ */
+struct omap_opp {
+	unsigned long rate;
+	u8 opp_id;
+	u16 min_vdd;
+};
+
+extern struct omap_opp *mpu_opps;
+extern struct omap_opp *dsp_opps;
+extern struct omap_opp *l3_opps;
+
+/*
+ * agent_id values for use with omap_pm_set_min_bus_tput():
+ *
+ * OCP_INITIATOR_AGENT is only valid for devices that can act as
+ * initiators -- it represents the device's L3 interconnect
+ * connection.  OCP_TARGET_AGENT represents the device's L4
+ * interconnect connection.
+ */
+#define OCP_TARGET_AGENT		1
+#define OCP_INITIATOR_AGENT		2
+
+/**
+ * omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
+ *
+ * Initialize anything that must be configured before the clock
+ * framework starts.  The "_if_" is to avoid name collisions with the
+ * PM idle-loop code.
+ */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+				 struct omap_opp *dsp_opp_table,
+				 struct omap_opp *l3_opp_table);
+
+/**
+ * omap_pm_if_init - OMAP PM init code called after clock fw init
+ *
+ * The main initialization code.  OPP tables are passed in here.  The
+ * "_if_" is to avoid name collisions with the PM idle-loop code.
+ */
+int __init omap_pm_if_init(void);
+
+/**
+ * omap_pm_if_exit - OMAP PM exit code
+ *
+ * Exit code; currently unused.  The "_if_" is to avoid name
+ * collisions with the PM idle-loop code.
+ */
+void omap_pm_if_exit(void);
+
+/*
+ * Device-driver-originated constraints (via board-*.c files, platform_data)
+ */
+
+
+/**
+ * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
+ * @dev: struct device * requesting the constraint
+ * @t: maximum MPU wakeup latency in microseconds
+ *
+ * Request that the maximum interrupt latency for the MPU to be no
+ * greater than 't' microseconds. "Interrupt latency" in this case is
+ * defined as the elapsed time from the occurrence of a hardware or
+ * timer interrupt to the time when the device driver's interrupt
+ * service routine has been entered by the MPU.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the MPU powerdomain into, and
+ * possibly the CORE powerdomain as well, since interrupt handling
+ * code currently runs from SDRAM.  Advanced PM or board*.c code may
+ * also configure interrupt controller priorities, OCP bus priorities,
+ * CPU speed(s), etc.
+ *
+ * This function will not affect device wakeup latency, e.g., time
+ * elapsed from when a device driver enables a hardware device with
+ * clk_enable(), to when the device is ready for register access or
+ * other use.  To control this device wakeup latency, use
+ * set_max_dev_wakeup_lat()
+ *
+ * Multiple calls to set_max_mpu_wakeup_lat() will replace the
+ * previous t value.  To remove the latency target for the MPU, call
+ * with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
+ * @dev: struct device * requesting the constraint
+ * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
+ * @r: minimum throughput (in KiB/s)
+ *
+ * Request that the minimum data throughput on the OCP interconnect
+ * attached to device 'dev' interconnect agent 'tbus_id' be no less
+ * than 'r' KiB/s.
+ *
+ * It is expected that the OMAP PM or bus code will use this
+ * information to set the interconnect clock to run at the lowest
+ * possible speed that satisfies all current system users.  The PM or
+ * bus code will adjust the estimate based on its model of the bus, so
+ * device driver authors should attempt to specify an accurate
+ * quantity for their device use case, and let the PM or bus code
+ * overestimate the numbers as necessary to handle request/response
+ * latency, other competing users on the system, etc.  On OMAP2/3, if
+ * a driver requests a minimum L4 interconnect speed constraint, the
+ * code will also need to add an minimum L3 interconnect speed
+ * constraint,
+ *
+ * Multiple calls to set_min_bus_tput() will replace the previous rate
+ * value for this device.  To remove the interconnect throughput
+ * restriction for this device, call with r = 0.
+ *
+ * No return value.
+ */
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+
+
+/**
+ * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
+ * @dev: struct device *
+ * @t: maximum device wakeup latency in microseconds
+ *
+ * Request that the maximum amount of time necessary for a device to
+ * become accessible after its clocks are enabled should be no greater
+ * than 't' microseconds.  Specifically, this represents the time from
+ * when a device driver enables device clocks with clk_enable(), to
+ * when the register reads and writes on the device will succeed.
+ * This function should be called before clk_disable() is called,
+ * since the power state transition decision may be made during
+ * clk_disable().
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the powerdomain enclosing this
+ * device into.
+ *
+ * Multiple calls to set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the wakeup
+ * latency restriction for this device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
+ * @dev: struct device *
+ * @t: maximum DMA transfer start latency in microseconds
+ *
+ * Request that the maximum system DMA transfer start latency for this
+ * device 'dev' should be no greater than 't' microseconds.  "DMA
+ * transfer start latency" here is defined as the elapsed time from
+ * when a device (e.g., McBSP) requests that a system DMA transfer
+ * start or continue, to the time at which data starts to flow into
+ * that device from the system DMA controller.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the CORE powerdomain into.
+ *
+ * Since system DMA transfers may not involve the MPU, this function
+ * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
+ * so.  Similarly, this function will not affect device wakeup latency
+ * -- use set_max_dev_wakeup_lat() to affect that.
+ *
+ * Multiple calls to set_max_sdma_lat() will replace the previous t
+ * value for this device.  To remove the maximum DMA latency for this
+ * device, call with t = -1.
+ *
+ * No return value.
+ */
+void omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+/**
+ * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
+ *
+ * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
+ * frequency entries.  The final item in the array should have .rate =
+ * .opp_id = 0.
+ */
+const struct omap_opp *omap_pm_dsp_get_opp_table(void);
+
+/**
+ * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
+ * @opp_id: target DSP OPP ID
+ *
+ * Set a minimum OPP ID for the DSP.  This is intended to be called
+ * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
+ * information that code receives from the DSP/BIOS load estimator is the
+ * target OPP ID; hence, this interface.  No return value.
+ */
+void omap_pm_dsp_set_min_opp(u8 opp_id);
+
+/**
+ * omap_pm_dsp_get_opp - report the current DSP OPP ID
+ *
+ * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
+ * MPU share a single voltage domain, the OPP ID returned back may
+ * represent a higher DSP speed than the OPP requested via
+ * omap_pm_dsp_set_min_opp().
+ *
+ * Returns the current VDD1 OPP ID, or 0 upon error.
+ */
+u8 omap_pm_dsp_get_opp(void);
+
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+/**
+ * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
+ *
+ * Provide a frequency table usable by CPUFreq for the current chip/board.
+ * Returns a pointer to a struct cpufreq_frequency_table array or NULL
+ * upon error.
+ */
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
+
+/**
+ * omap_pm_cpu_set_freq - set the current minimum MPU frequency
+ * @f: MPU frequency in Hz
+ *
+ * Set the current minimum CPU frequency.  The actual CPU frequency
+ * used could end up higher if the DSP requested a higher OPP.
+ * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
+ * return value.
+ */
+void omap_pm_cpu_set_freq(unsigned long f);
+
+/**
+ * omap_pm_cpu_get_freq - report the current CPU frequency
+ *
+ * Returns the current MPU frequency, or 0 upon error.
+ */
+unsigned long omap_pm_cpu_get_freq(void);
+
+
+/*
+ * Device context loss tracking
+ */
+
+/**
+ * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
+ * @dev: struct device *
+ *
+ * This function returns the number of times that the device @dev has
+ * lost its internal context.  This generally occurs on a powerdomain
+ * transition to OFF.  Drivers use this as an optimization to avoid restoring
+ * context if the device hasn't lost it.  To use, drivers should initially
+ * call this in their context save functions and store the result.  Early in
+ * the driver's context restore function, the driver should call this function
+ * again, and compare the result to the stored counter.  If they differ, the
+ * driver must restore device context.   If the number of context losses
+ * exceeds the maximum positive integer, the function will wrap to 0 and
+ * continue counting.  Returns the number of context losses for this device,
+ * or -EINVAL upon error.
+ */
+int omap_pm_get_dev_context_loss_count(struct device *dev);
+
+
+#endif
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
new file mode 100644
index 00000000000..e98f0a2a6c2
--- /dev/null
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -0,0 +1,296 @@
+/*
+ * omap-pm-noop.c - OMAP power management interface - dummy version
+ *
+ * This code implements the OMAP power management interface to
+ * drivers, CPUIdle, CPUFreq, and DSP Bridge.  It is strictly for
+ * debug/demonstration use, as it does nothing but printk() whenever a
+ * function is called (when DEBUG is defined, below)
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order):
+ * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
+ * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+
+/* Interface documentation is in mach/omap-pm.h */
+#include <mach/omap-pm.h>
+
+#include <mach/powerdomain.h>
+
+struct omap_opp *dsp_opps;
+struct omap_opp *mpu_opps;
+struct omap_opp *l3_opps;
+
+/*
+ * Device-driver-originated constraints (via board-*.c files)
+ */
+
+void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max MPU wakeup latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max MPU wakeup latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the MPU to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on the MPU and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+{
+	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
+	    agent_id != OCP_TARGET_AGENT)) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min bus tput constraint: "
+			 "dev %s for agent_id %d\n", dev_name(dev), agent_id);
+	else
+		pr_debug("OMAP PM: add min bus tput constraint: "
+			 "dev %s for agent_id %d: rate %ld KiB\n",
+			 dev_name(dev), agent_id, r);
+
+	/*
+	 * This code should model the interconnect and compute the
+	 * required clock frequency, convert that to a VDD2 OPP ID, then
+	 * set the VDD2 OPP appropriately.
+	 *
+	 * TI CDP code can call constraint_set here on the VDD2 OPP.
+	 */
+}
+
+void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max device latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max device latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux, this needs to map the device to a
+	 * powerdomain, then go through the list of current max lat
+	 * constraints on that powerdomain and find the smallest.  If
+	 * the latency constraint has changed, the code should
+	 * recompute the state to enter for the next powerdomain
+	 * state.  Conceivably, this code should also determine
+	 * whether to actually disable the device clocks or not,
+	 * depending on how long it takes to re-enable the clocks.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+}
+
+void omap_pm_set_max_sdma_lat(struct device *dev, long t)
+{
+	if (!dev || t < -1) {
+		WARN_ON(1);
+		return;
+	};
+
+	if (t == -1)
+		pr_debug("OMAP PM: remove max DMA latency constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add max DMA latency constraint: "
+			 "dev %s, t = %ld usec\n", dev_name(dev), t);
+
+	/*
+	 * For current Linux PM QOS params, this code should scan the
+	 * list of maximum CPU and DMA latencies and select the
+	 * smallest, then set cpu_dma_latency pm_qos_param
+	 * accordingly.
+	 *
+	 * For future Linux PM QOS params, with separate CPU and DMA
+	 * latency params, this code should just set the dma_latency param.
+	 *
+	 * TI CDP code can call constraint_set here.
+	 */
+
+}
+
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+const struct omap_opp *omap_pm_dsp_get_opp_table(void)
+{
+	pr_debug("OMAP PM: DSP request for OPP table\n");
+
+	/*
+	 * Return DSP frequency table here:  The final item in the
+	 * array should have .rate = .opp_id = 0.
+	 */
+
+	return NULL;
+}
+
+void omap_pm_dsp_set_min_opp(u8 opp_id)
+{
+	if (opp_id == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: DSP requests minimum VDD1 OPP to be %d\n", opp_id);
+
+	/*
+	 *
+	 * For l-o dev tree, our VDD1 clk is keyed on OPP ID, so we
+	 * can just test to see which is higher, the CPU's desired OPP
+	 * ID or the DSP's desired OPP ID, and use whichever is
+	 * highest.
+	 *
+	 * In CDP12.14+, the VDD1 OPP custom clock that controls the DSP
+	 * rate is keyed on MPU speed, not the OPP ID.  So we need to
+	 * map the OPP ID to the MPU speed for use with clk_set_rate()
+	 * if it is higher than the current OPP clock rate.
+	 *
+	 */
+}
+
+
+u8 omap_pm_dsp_get_opp(void)
+{
+	pr_debug("OMAP PM: DSP requests current DSP OPP ID\n");
+
+	/*
+	 * For l-o dev tree, call clk_get_rate() on VDD1 OPP clock
+	 *
+	 * CDP12.14+:
+	 * Call clk_get_rate() on the OPP custom clock, map that to an
+	 * OPP ID using the tables defined in board-*.c/chip-*.c files.
+	 */
+
+	return 0;
+}
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void)
+{
+	pr_debug("OMAP PM: CPUFreq request for frequency table\n");
+
+	/*
+	 * Return CPUFreq frequency table here: loop over
+	 * all VDD1 clkrates, pull out the mpu_ck frequencies, build
+	 * table
+	 */
+
+	return NULL;
+}
+
+void omap_pm_cpu_set_freq(unsigned long f)
+{
+	if (f == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	pr_debug("OMAP PM: CPUFreq requests CPU frequency to be set to %lu\n",
+		 f);
+
+	/*
+	 * For l-o dev tree, determine whether MPU freq or DSP OPP id
+	 * freq is higher.  Find the OPP ID corresponding to the
+	 * higher frequency.  Call clk_round_rate() and clk_set_rate()
+	 * on the OPP custom clock.
+	 *
+	 * CDP should just be able to set the VDD1 OPP clock rate here.
+	 */
+}
+
+unsigned long omap_pm_cpu_get_freq(void)
+{
+	pr_debug("OMAP PM: CPUFreq requests current CPU frequency\n");
+
+	/*
+	 * Call clk_get_rate() on the mpu_ck.
+	 */
+
+	return 0;
+}
+
+/*
+ * Device context loss tracking
+ */
+
+int omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+	if (!dev) {
+		WARN_ON(1);
+		return -EINVAL;
+	};
+
+	pr_debug("OMAP PM: returning context loss count for dev %s\n",
+		 dev_name(dev));
+
+	/*
+	 * Map the device to the powerdomain.  Return the powerdomain
+	 * off counter.
+	 */
+
+	return 0;
+}
+
+
+/* Should be called before clk framework init */
+int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
+				 struct omap_opp *dsp_opp_table,
+				 struct omap_opp *l3_opp_table)
+{
+	mpu_opps = mpu_opp_table;
+	dsp_opps = dsp_opp_table;
+	l3_opps = l3_opp_table;
+	return 0;
+}
+
+/* Must be called after clock framework is initialized */
+int __init omap_pm_if_init(void)
+{
+	return 0;
+}
+
+void omap_pm_if_exit(void)
+{
+	/* Deallocate CPUFreq frequency table here */
+}
+
-- 
cgit v1.2.3


From 71348bcaac6f4c372525d4d62e88a82a7330435b Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:02 +0300
Subject: OMAP2/3/4 PRCM: add module IDLEST wait code

After a hardware module's clocks are enabled, Linux must wait for it
to indicate readiness via its IDLEST bit before attempting to access
the device, otherwise register accesses to the device may trigger an
abort.  This has traditionally been implemented in the clock
framework, but this is the wrong place for it: the clock framework
doesn't know which module clocks must be enabled for a module to leave
idle; and if a module is not in smart-idle mode, it may never leave
idle at all.  This type of information is best stored in a
per-hardware module data structure (coming in a following patch),
rather than a per-clock data structure.  The new code will use these new
functions to handle waiting for modules to enable.

Once hardware module data is filled in for all of the on-chip devices,
the clock framework code to handle IDLEST waiting can be removed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/Makefile |  5 ++++
 arch/arm/mach-omap2/cm.c     | 70 ++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/cm.h     |  4 +++
 arch/arm/mach-omap2/cm4xxx.c | 68 ++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 147 insertions(+)
 create mode 100644 arch/arm/mach-omap2/cm.c
 create mode 100644 arch/arm/mach-omap2/cm4xxx.c

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8850a247bec..59d730fa77e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -35,6 +35,11 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
+# PRCM
+obj-$(CONFIG_ARCH_OMAP2)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
+obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
+
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
new file mode 100644
index 00000000000..8eb2dab8c7d
--- /dev/null
+++ b/arch/arm/mach-omap2/cm.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP2/3 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME		20000
+
+static const u8 cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+};
+
+/**
+ * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * XXX document
+ */
+int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	int ena = 0, i = 0;
+	u8 cm_idlest_reg;
+	u32 mask;
+
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+		return -EINVAL;
+
+	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+
+	if (cpu_is_omap24xx())
+		ena = idlest_shift;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	mask = 1 << idlest_shift;
+
+	/* XXX should be OMAP2 CM */
+	while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 18d9a121aa7..cfd0b726ba4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -98,6 +98,10 @@ extern u32 cm_read_mod_reg(s16 module, u16 idx);
 extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
 extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 
+extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+				      u8 idlest_shift);
+extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
+
 static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
 	return cm_rmw_mod_reg_bits(bits, bits, module, idx);
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
new file mode 100644
index 00000000000..e4ebd6d5313
--- /dev/null
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -0,0 +1,68 @@
+/*
+ * OMAP4 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/atomic.h>
+
+#include "cm.h"
+#include "cm-regbits-4xxx.h"
+
+/* XXX move this to cm.h */
+/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
+#define MAX_MODULE_READY_TIME			20000
+
+/*
+ * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
+ * CM_CLKCTRL register.
+ */
+#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK	(0x2 << 16)
+
+/*
+ * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
+ * the PRCM module offset address (from the CM module base) in bits 15-0.
+ */
+#define OMAP4_PRCM_MOD_CM_ID_SHIFT		16
+#define OMAP4_PRCM_MOD_OFFS_MASK		0xffff
+
+/**
+ * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset (XXX example)
+ * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
+ *
+ * XXX document
+ */
+int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
+{
+	int i = 0;
+	u8 cm_id;
+	u16 prcm_mod_offs;
+	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
+
+	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
+	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
+
+	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
+				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
+	       (i++ < MAX_MODULE_READY_TIME))
+		udelay(1);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
-- 
cgit v1.2.3


From b3c6df3ab2b17cd7ddf927d39a64f235b25ac8d4 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:02 +0300
Subject: OMAP2/3 board-*.c files: read bootloader configuration earlier

Most board-*.c files read configuration data from the bootloader in
their .init_machine() function.  This needs to happen earlier, at some
point before omap2_init_common_hw() is called.  This is because a
future patch will use the bootloader serial console port information
to enable the UART clocks earlier, immediately after omap2_clk_init().
This is in turn necessary since otherwise clock tree usecounts on
clocks like dpll4_m2x2_ck will be bogus, which can cause the
currently-active console UART clock to be disabled during boot.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/board-2430sdp.c      | 13 ++++++-------
 arch/arm/mach-omap2/board-3430sdp.c      | 18 +++++++++---------
 arch/arm/mach-omap2/board-apollon.c      | 20 ++++++++++----------
 arch/arm/mach-omap2/board-generic.c      | 10 +++++-----
 arch/arm/mach-omap2/board-h4.c           | 20 ++++++++++----------
 arch/arm/mach-omap2/board-ldp.c          | 20 ++++++++++----------
 arch/arm/mach-omap2/board-omap3beagle.c  | 26 +++++++++++++-------------
 arch/arm/mach-omap2/board-omap3evm.c     | 12 ++++++------
 arch/arm/mach-omap2/board-omap3pandora.c | 20 ++++++++++----------
 arch/arm/mach-omap2/board-overo.c        | 20 ++++++++++----------
 arch/arm/mach-omap2/board-rx51.c         |  4 ++--
 arch/arm/mach-omap2/board-zoom2.c        | 18 +++++++++---------
 arch/arm/mach-omap2/io.c                 |  2 ++
 arch/arm/mach-omap2/serial.c             | 14 +++++++++++++-
 arch/arm/plat-omap/include/mach/serial.h |  3 +++
 15 files changed, 118 insertions(+), 102 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 7f5a74d5924..42217b32f83 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -139,18 +139,19 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static struct omap_board_config_kernel sdp2430_config[] = {
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
+};
+
 static void __init omap_2430sdp_init_irq(void)
 {
+	omap_board_config = sdp2430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct omap_board_config_kernel sdp2430_config[] = {
-	{OMAP_TAG_LCD, &sdp2430_lcd_config},
-};
-
-
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -200,8 +201,6 @@ static void __init omap_2430sdp_init(void)
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
-	omap_board_config = sdp2430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 7e9b76cc767..4500e7f674d 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -167,13 +167,6 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 	&sdp3430_lcd_device,
 };
 
-static void __init omap_3430sdp_init_irq(void)
-{
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct omap_lcd_config sdp3430_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -182,6 +175,15 @@ static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
+static void __init omap_3430sdp_init_irq(void)
+{
+	omap_board_config = sdp3430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static int sdp3430_batt_table[] = {
 /* 0 C*/
 30800, 29500, 28300, 27100,
@@ -477,8 +479,6 @@ static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
-	omap_board_config = sdp3430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	if (omap_rev() > OMAP3430_REV_ES1_0)
 		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 	else
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 615f21d1eb2..7a2b54c7291 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -248,14 +248,6 @@ out:
 	clk_put(gpmc_fck);
 }
 
-static void __init omap_apollon_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
-}
-
 static struct omap_usb_config apollon_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 0x14,	/* 0:dev 1:host1 2:disable */
@@ -271,6 +263,16 @@ static struct omap_board_config_kernel apollon_config[] = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
+static void __init omap_apollon_init_irq(void)
+{
+	omap_board_config = apollon_config;
+	omap_board_config_size = ARRAY_SIZE(apollon_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	apollon_init_smc91x();
+}
+
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
@@ -319,8 +321,6 @@ static void __init omap_apollon_init(void)
 	 * if not needed.
 	 */
 	platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
-	omap_board_config = apollon_config;
-	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 3e401c5b6e4..2e09a1c444c 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -31,19 +31,19 @@
 #include <mach/board.h>
 #include <mach/common.h>
 
+static struct omap_board_config_kernel generic_config[] = {
+};
+
 static void __init omap_generic_init_irq(void)
 {
+	omap_board_config = generic_config;
+	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 
-static struct omap_board_config_kernel generic_config[] = {
-};
-
 static void __init omap_generic_init(void)
 {
-	omap_board_config = generic_config;
-	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index b6501d241c1..eaa02d012c5 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -268,14 +268,6 @@ static void __init h4_init_flash(void)
 	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
-static void __init omap_h4_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	h4_init_flash();
-}
-
 static struct omap_lcd_config h4_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -317,6 +309,16 @@ static struct omap_board_config_kernel h4_config[] = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
+static void __init omap_h4_init_irq(void)
+{
+	omap_board_config = h4_config;
+	omap_board_config_size = ARRAY_SIZE(h4_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	h4_init_flash();
+}
+
 static struct at24_platform_data m24c01 = {
 	.byte_len	= SZ_1K / 8,
 	.page_size	= 16,
@@ -361,8 +363,6 @@ static void __init omap_h4_init(void)
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_board_config = h4_config;
-	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap_usb_init(&h4_usb_config);
 	omap_serial_init();
 }
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 2dd6806a1e8..ec6854cbdd9 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -268,14 +268,6 @@ static inline void __init ldp_init_smsc911x(void)
 	gpio_direction_input(eth_gpio);
 }
 
-static void __init omap_ldp_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-	ldp_init_smsc911x();
-}
-
 static struct platform_device ldp_lcd_device = {
 	.name		= "ldp_lcd",
 	.id		= -1,
@@ -289,6 +281,16 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
+static void __init omap_ldp_init_irq(void)
+{
+	omap_board_config = ldp_config;
+	omap_board_config_size = ARRAY_SIZE(ldp_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+	ldp_init_smsc911x();
+}
+
 static struct twl4030_usb_data ldp_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -372,8 +374,6 @@ static void __init omap_ldp_init(void)
 {
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_board_config = ldp_config;
-	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	ts_gpio = 54;
 	ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 	spi_register_board_info(ldp_spi_board_info,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index d79ea8da627..500c9956876 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -281,17 +281,6 @@ static int __init omap3_beagle_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3_beagle_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-#ifdef CONFIG_OMAP_32K_TIMER
-	omap2_gp_clockevent_set_gptimer(12);
-#endif
-	omap_gpio_init();
-}
-
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "beagleboard::usr0",
@@ -349,6 +338,19 @@ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
 };
 
+static void __init omap3_beagle_init_irq(void)
+{
+	omap_board_config = omap3_beagle_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&omap3_beagle_lcd_device,
 	&leds_gpio,
@@ -398,8 +400,6 @@ static void __init omap3_beagle_init(void)
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
-	omap_board_config = omap3_beagle_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
 
 	omap_cfg_reg(J25_34XX_GPIO170);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3e0435371ce..d50b9be9058 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -274,18 +274,20 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 	},
 };
 
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+};
+
 static void __init omap3_evm_init_irq(void)
 {
+	omap_board_config = omap3_evm_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();
 }
 
-static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
-};
-
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
 	&omap3evm_smc911x_device,
@@ -296,8 +298,6 @@ static void __init omap3_evm_init(void)
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
-	omap_board_config = omap3_evm_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 
 	spi_register_board_info(omap3evm_spi_board_info,
 				ARRAY_SIZE(omap3evm_spi_board_info));
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 8236708c362..b43f6e36b6d 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -305,14 +305,6 @@ static int __init omap3pandora_i2c_init(void)
 	return 0;
 }
 
-static void __init omap3pandora_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static void __init omap3pandora_ads7846_init(void)
 {
 	int gpio = OMAP3_PANDORA_TS_GPIO;
@@ -375,6 +367,16 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
 };
 
+static void __init omap3pandora_init_irq(void)
+{
+	omap_board_config = omap3pandora_config;
+	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&omap3pandora_lcd_device,
 	&pandora_leds_gpio,
@@ -386,8 +388,6 @@ static void __init omap3pandora_init(void)
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
-	omap_board_config = omap3pandora_config;
-	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
 	omap_serial_init();
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index eb78e6eab4f..9917d2fddc2 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -357,14 +357,6 @@ static int __init overo_i2c_init(void)
 	return 0;
 }
 
-static void __init overo_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct platform_device overo_lcd_device = {
 	.name		= "overo_lcd",
 	.id		= -1,
@@ -378,6 +370,16 @@ static struct omap_board_config_kernel overo_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
+static void __init overo_init_irq(void)
+{
+	omap_board_config = overo_config;
+	omap_board_config_size = ARRAY_SIZE(overo_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
@@ -386,8 +388,6 @@ static void __init overo_init(void)
 {
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
-	omap_board_config = overo_config;
-	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index c0d13401425..f9196c3b1a7 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -56,6 +56,8 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
+	omap_board_config = rx51_config;
+	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
@@ -65,8 +67,6 @@ extern void __init rx51_peripherals_init(void);
 
 static void __init rx51_init(void)
 {
-	omap_board_config = rx51_config;
-	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index dabba2720a9..324009edbd5 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -90,13 +90,6 @@ static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
 	.rep		= 1,
 };
 
-static void __init omap_zoom2_init_irq(void)
-{
-	omap2_init_common_hw(NULL, NULL);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
 static struct omap_board_config_kernel zoom2_config[] __initdata = {
 };
 
@@ -212,6 +205,15 @@ static struct twl4030_usb_data zoom2_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static void __init omap_zoom2_init_irq(void)
+{
+	omap_board_config = zoom2_config;
+	omap_board_config_size = ARRAY_SIZE(zoom2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
 static struct twl4030_gpio_platform_data zoom2_gpio_data = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
@@ -262,8 +264,6 @@ extern int __init omap_zoom2_debugboard_init(void);
 static void __init omap_zoom2_init(void)
 {
 	omap_i2c_init();
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap_serial_init();
 	omap_zoom2_debugboard_init();
 	usb_musb_init();
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4bfe873e1b8..470b1d10c4e 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -32,6 +32,7 @@
 #include <mach/sram.h>
 #include <mach/sdrc.h>
 #include <mach/gpmc.h>
+#include <mach/serial.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
@@ -287,6 +288,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+	omap_serial_early_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index dd3c735b558..ca28424f2fb 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -552,7 +552,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 	},
 };
 
-void __init omap_serial_init(void)
+void __init omap_serial_early_init(void)
 {
 	int i;
 	char name[16];
@@ -595,6 +595,18 @@ void __init omap_serial_init(void)
 			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
+	}
+}
+
+void __init omap_serial_init(void)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index def0529c75e..e249186d26e 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
+#include <linux/init.h>
+
 #if defined(CONFIG_ARCH_OMAP1)
 /* OMAP1 serial ports */
 #define OMAP_UART1_BASE		0xfffb0000
@@ -53,6 +55,7 @@
 			})
 
 #ifndef __ASSEMBLER__
+extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
-- 
cgit v1.2.3


From 63c852384125ca0eff0e695f92cbbd439bed4aa3 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:03 +0300
Subject: OMAP2/3/4: create omap_hwmod layer

OMAP SoCs can be considered a collection of hardware IP blocks
connected by various interconnects.  The bus topology and device
integration data is somewhat more complex than platform_device can
encode.  This patch creates code and structures to manage information
about OMAP on-chip devices ("hardware modules") and their integration
to the rest of the chip.  Hardware module data is intended to be
generated dynamically from the TI hardware database for the OMAP4
chips and beyond, easing Linux support for new chip variants.

This code currently:

- resets and configures all hardware modules upon startup, reducing bootloader
  dependencies;

- provides hooks for Linux driver model code to enable, idle, and shutdown
  hardware modules (forthcoming patch);

- waits for hardware modules to leave idle once their clocks
  are enabled and OCP_SYSCONFIG bits are set appropriately.

- provides a means to pass arbitrary IP block configuration data (e.g.,
  FIFO size) to the device driver (via the dev_attr void pointer)

In the future this code is intended to:

- estimate interconnect bandwidth and latency characteristics to
  ensure constraints are satisfied during DVFS

- provide *GRPSEL bit data to the powerdomain code

- handle pin/ball muxing for devices

- generate IO mapping information dynamically

- supply device firewall configuration data

- provide hardware module data to other on-chip coprocessor software

- allow the removal of the "disable unused clocks" code in the OMAP2/3
  clock code

This patch represents a collaborative effort involving many people from TI,
Nokia, and the Linux-OMAP community.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Eric Thomas <ethomas@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
---
 arch/arm/mach-omap2/Makefile                 |    2 +-
 arch/arm/mach-omap2/omap_hwmod.c             | 1555 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/omap_hwmod.h |  447 ++++++++
 3 files changed, 2003 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-omap2/omap_hwmod.c
 create mode 100644 arch/arm/plat-omap/include/mach/omap_hwmod.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 59d730fa77e..8cb16777661 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
 prcm-common				= prcm.o powerdomain.o
 clock-common				= clock.o clockdomain.o
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
new file mode 100644
index 00000000000..3b10ad6c47d
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -0,0 +1,1555 @@
+/*
+ * omap_hwmod implementation for OMAP2/3/4
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ * With fixes and testing from Kevin Hilman
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code manages "OMAP modules" (on-chip devices) and their
+ * integration with Linux device driver and bus code.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - pin mux handling
+ * - handle IO mapping
+ * - bus throughput & module latency measurement code
+ *
+ * XXX add tests at the beginning of each function to ensure the hwmod is
+ * in the appropriate state
+ * XXX error return values should be checked to ensure that they are
+ * appropriate
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/bootmem.h>
+
+#include <mach/cpu.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/clock.h>
+#include <mach/omap_hwmod.h>
+
+#include "cm.h"
+
+/* Maximum microseconds to wait for OMAP module to reset */
+#define MAX_MODULE_RESET_WAIT		10000
+
+/* Name of the OMAP hwmod for the MPU */
+#define MPU_INITIATOR_NAME		"mpu_hwmod"
+
+/* omap_hwmod_list contains all registered struct omap_hwmods */
+static LIST_HEAD(omap_hwmod_list);
+
+static DEFINE_MUTEX(omap_hwmod_mutex);
+
+/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
+static struct omap_hwmod *mpu_oh;
+
+/* inited: 0 if omap_hwmod_init() has not yet been called; 1 otherwise */
+static u8 inited;
+
+
+/* Private functions */
+
+/**
+ * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
+ * @oh: struct omap_hwmod *
+ *
+ * Load the current value of the hwmod OCP_SYSCONFIG register into the
+ * struct omap_hwmod for later use.  Returns -EINVAL if the hwmod has no
+ * OCP_SYSCONFIG register or 0 upon success.
+ */
+static int _update_sysc_cache(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig) {
+		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot read "
+		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+		return -EINVAL;
+	}
+
+	/* XXX ensure module interface clock is up */
+
+	oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+
+	oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+
+	return 0;
+}
+
+/**
+ * _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
+ * @v: OCP_SYSCONFIG value to write
+ * @oh: struct omap_hwmod *
+ *
+ * Write @v into the module OCP_SYSCONFIG register, if it has one.  No
+ * return value.
+ */
+static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig) {
+		WARN(!oh->sysconfig, "omap_hwmod: %s: cannot write "
+		     "OCP_SYSCONFIG: not defined on hwmod\n", oh->name);
+		return;
+	}
+
+	/* XXX ensure module interface clock is up */
+
+	if (oh->_sysc_cache != v) {
+		oh->_sysc_cache = v;
+		omap_hwmod_writel(v, oh, oh->sysconfig->sysc_offs);
+	}
+}
+
+/**
+ * _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
+ * @oh: struct omap_hwmod *
+ * @standbymode: MIDLEMODE field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the master standby mode bits in @v to be @standbymode for
+ * the @oh hwmod.  Does not write to the hardware.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
+				   u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE))
+		return -EINVAL;
+
+	*v &= ~SYSC_MIDLEMODE_MASK;
+	*v |= __ffs(standbymode) << SYSC_MIDLEMODE_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
+ * @oh: struct omap_hwmod *
+ * @idlemode: SIDLEMODE field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the slave idle mode bits in @v to be @idlemode for the @oh
+ * hwmod.  Does not write to the hardware.  Returns -EINVAL upon error
+ * or 0 upon success.
+ */
+static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE))
+		return -EINVAL;
+
+	*v &= ~SYSC_SIDLEMODE_MASK;
+	*v |= __ffs(idlemode) << SYSC_SIDLEMODE_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * @oh: struct omap_hwmod *
+ * @clockact: CLOCKACTIVITY field bits
+ * @v: pointer to register contents to modify
+ *
+ * Update the clockactivity mode bits in @v to be @clockact for the
+ * @oh hwmod.  Used for additional powersaving on some modules.  Does
+ * not write to the hardware.  Returns -EINVAL upon error or 0 upon
+ * success.
+ */
+static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+		return -EINVAL;
+
+	*v &= ~SYSC_CLOCKACTIVITY_MASK;
+	*v |= clockact << SYSC_CLOCKACTIVITY_SHIFT;
+
+	return 0;
+}
+
+/**
+ * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Set the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_softreset(struct omap_hwmod *oh, u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET))
+		return -EINVAL;
+
+	*v |= SYSC_SOFTRESET_MASK;
+
+	return 0;
+}
+
+/**
+ * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
+ * @oh: struct omap_hwmod *
+ *
+ * Allow the hardware module @oh to send wakeups.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _enable_wakeup(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	v = oh->_sysc_cache;
+	v |= SYSC_ENAWAKEUP_MASK;
+	_write_sysconfig(v, oh);
+
+	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
+
+	oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
+
+	return 0;
+}
+
+/**
+ * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
+ * @oh: struct omap_hwmod *
+ *
+ * Prevent the hardware module @oh to send wakeups.  Returns -EINVAL
+ * upon error or 0 upon success.
+ */
+static int _disable_wakeup(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	v = oh->_sysc_cache;
+	v &= ~SYSC_ENAWAKEUP_MASK;
+	_write_sysconfig(v, oh);
+
+	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
+
+	oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
+
+	return 0;
+}
+
+/**
+ * _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
+ * @oh: struct omap_hwmod *
+ *
+ * Prevent the hardware module @oh from entering idle while the
+ * hardare module initiator @init_oh is active.  Useful when a module
+ * will be accessed by a particular initiator (e.g., if a module will
+ * be accessed by the IVA, there should be a sleepdep between the IVA
+ * initiator and the module).  Only applies to modules in smart-idle
+ * mode.  Returns -EINVAL upon error or passes along
+ * pwrdm_add_sleepdep() value upon success.
+ */
+static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
+{
+	if (!oh->_clk)
+		return -EINVAL;
+
+	return pwrdm_add_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
+				  init_oh->_clk->clkdm->pwrdm.ptr);
+}
+
+/**
+ * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
+ * @oh: struct omap_hwmod *
+ *
+ * Allow the hardware module @oh to enter idle while the hardare
+ * module initiator @init_oh is active.  Useful when a module will not
+ * be accessed by a particular initiator (e.g., if a module will not
+ * be accessed by the IVA, there should be no sleepdep between the IVA
+ * initiator and the module).  Only applies to modules in smart-idle
+ * mode.  Returns -EINVAL upon error or passes along
+ * pwrdm_add_sleepdep() value upon success.
+ */
+static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
+{
+	if (!oh->_clk)
+		return -EINVAL;
+
+	return pwrdm_del_sleepdep(oh->_clk->clkdm->pwrdm.ptr,
+				  init_oh->_clk->clkdm->pwrdm.ptr);
+}
+
+/**
+ * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh _clk (main
+ * functional clock pointer) if a main_clk is present.  Returns 0 on
+ * success or -EINVAL on error.
+ */
+static int _init_main_clk(struct omap_hwmod *oh)
+{
+	struct clk *c;
+	int ret = 0;
+
+	if (!oh->clkdev_con_id)
+		return 0;
+
+	c = clk_get_sys(oh->clkdev_dev_id, oh->clkdev_con_id);
+	WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s.%s\n",
+	     oh->name, oh->clkdev_dev_id, oh->clkdev_con_id);
+	if (IS_ERR(c))
+		ret = -EINVAL;
+	oh->_clk = c;
+
+	return ret;
+}
+
+/**
+ * _init_interface_clk - get a struct clk * for the the hwmod's interface clks
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh OCP slave interface
+ * clock pointers.  Returns 0 on success or -EINVAL on error.
+ */
+static int _init_interface_clks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct clk *c;
+	int i;
+	int ret = 0;
+
+	if (oh->slaves_cnt == 0)
+		return 0;
+
+	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		if (!os->clkdev_con_id)
+			continue;
+
+		c = clk_get_sys(os->clkdev_dev_id, os->clkdev_con_id);
+		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
+		     "interface_clk %s.%s\n", oh->name,
+		     os->clkdev_dev_id, os->clkdev_con_id);
+		if (IS_ERR(c))
+			ret = -EINVAL;
+		os->_clk = c;
+	}
+
+	return ret;
+}
+
+/**
+ * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Called from _init_clocks().  Populates the @oh omap_hwmod_opt_clk
+ * clock pointers.  Returns 0 on success or -EINVAL on error.
+ */
+static int _init_opt_clks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	struct clk *c;
+	int i;
+	int ret = 0;
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
+		c = clk_get_sys(oc->clkdev_dev_id, oc->clkdev_con_id);
+		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
+		     "%s.%s\n", oh->name, oc->clkdev_dev_id,
+		     oc->clkdev_con_id);
+		if (IS_ERR(c))
+			ret = -EINVAL;
+		oc->_clk = c;
+	}
+
+	return ret;
+}
+
+/**
+ * _enable_clocks - enable hwmod main clock and interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Enables all clocks necessary for register reads and writes to succeed
+ * on the hwmod @oh.  Returns 0.
+ */
+static int _enable_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
+
+	if (oh->_clk && !IS_ERR(oh->_clk))
+		clk_enable(oh->_clk);
+
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+				clk_enable(c);
+		}
+	}
+
+	/* The opt clocks are controlled by the device driver. */
+
+	return 0;
+}
+
+/**
+ * _disable_clocks - disable hwmod main clock and interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Disables the hwmod @oh main functional and interface clocks.  Returns 0.
+ */
+static int _disable_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
+
+	if (oh->_clk && !IS_ERR(oh->_clk))
+		clk_disable(oh->_clk);
+
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+				clk_disable(c);
+		}
+	}
+
+	/* The opt clocks are controlled by the device driver. */
+
+	return 0;
+}
+
+/**
+ * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the array index of the OCP slave port that the MPU
+ * addresses the device on, or -EINVAL upon error or not found.
+ */
+static int _find_mpu_port_index(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+	int found = 0;
+
+	if (!oh || oh->slaves_cnt == 0)
+		return -EINVAL;
+
+	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		if (os->user & OCP_USER_MPU) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found)
+		pr_debug("omap_hwmod: %s: MPU OCP slave port ID  %d\n",
+			 oh->name, i);
+	else
+		pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
+			 oh->name);
+
+	return (found) ? i : -EINVAL;
+}
+
+/**
+ * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
+ * @oh: struct omap_hwmod *
+ *
+ * Return the virtual address of the base of the register target of
+ * device @oh, or NULL on error.
+ */
+static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+{
+	struct omap_hwmod_ocp_if *os;
+	struct omap_hwmod_addr_space *mem;
+	int i;
+	int found = 0;
+
+	if (!oh || oh->slaves_cnt == 0)
+		return NULL;
+
+	os = *oh->slaves + index;
+
+	for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
+		if (mem->flags & ADDR_TYPE_RT) {
+			found = 1;
+			break;
+		}
+	}
+
+	/* XXX use ioremap() instead? */
+
+	if (found)
+		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
+			 oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
+	else
+		pr_debug("omap_hwmod: %s: no MPU register target found\n",
+			 oh->name);
+
+	return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
+}
+
+/**
+ * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * If module is marked as SWSUP_SIDLE, force the module out of slave
+ * idle; otherwise, configure it for smart-idle.  If module is marked
+ * as SWSUP_MSUSPEND, force the module out of master standby;
+ * otherwise, configure it for smart-standby.  No return value.
+ */
+static void _sysc_enable(struct omap_hwmod *oh)
+{
+	u8 idlemode;
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		_set_slave_idlemode(oh, idlemode, &v);
+	}
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
+			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		_set_master_standbymode(oh, idlemode, &v);
+	}
+
+	/* XXX OCP AUTOIDLE bit? */
+
+	if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
+	    oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
+		_set_clockactivity(oh, oh->sysconfig->clockact, &v);
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * If module is marked as SWSUP_SIDLE, force the module into slave
+ * idle; otherwise, configure it for smart-idle.  If module is marked
+ * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
+ * configure it for smart-standby.  No return value.
+ */
+static void _sysc_idle(struct omap_hwmod *oh)
+{
+	u8 idlemode;
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		_set_slave_idlemode(oh, idlemode, &v);
+	}
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) {
+		idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ?
+			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		_set_master_standbymode(oh, idlemode, &v);
+	}
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
+ * @oh: struct omap_hwmod *
+ *
+ * Force the module into slave idle and master suspend. No return
+ * value.
+ */
+static void _sysc_shutdown(struct omap_hwmod *oh)
+{
+	u32 v;
+
+	if (!oh->sysconfig)
+		return;
+
+	v = oh->_sysc_cache;
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE)
+		_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
+
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
+		_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
+
+	/* XXX clear OCP AUTOIDLE bit? */
+
+	_write_sysconfig(v, oh);
+}
+
+/**
+ * _lookup - find an omap_hwmod by name
+ * @name: find an omap_hwmod by name
+ *
+ * Return a pointer to an omap_hwmod by name, or NULL if not found.
+ * Caller must hold omap_hwmod_mutex.
+ */
+static struct omap_hwmod *_lookup(const char *name)
+{
+	struct omap_hwmod *oh, *temp_oh;
+
+	oh = NULL;
+
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		if (!strcmp(name, temp_oh->name)) {
+			oh = temp_oh;
+			break;
+		}
+	}
+
+	return oh;
+}
+
+/**
+ * _init_clocks - clk_get() all clocks associated with this hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Called by omap_hwmod_late_init() (after omap2_clk_init()).
+ * Resolves all clock names embedded in the hwmod.  Must be called
+ * with omap_hwmod_mutex held.  Returns -EINVAL if the omap_hwmod
+ * has not yet been registered or if the clocks have already been
+ * initialized, 0 on success, or a non-zero error on failure.
+ */
+static int _init_clocks(struct omap_hwmod *oh)
+{
+	int ret = 0;
+
+	if (!oh || (oh->_state != _HWMOD_STATE_REGISTERED))
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
+
+	ret |= _init_main_clk(oh);
+	ret |= _init_interface_clks(oh);
+	ret |= _init_opt_clks(oh);
+
+	oh->_state = _HWMOD_STATE_CLKS_INITED;
+
+	return ret;
+}
+
+/**
+ * _wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle.  Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm_wait_module_ready() function.
+ */
+static int _wait_target_ready(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return 0;
+
+	os = *oh->slaves + oh->_mpu_port_index;
+
+	if (!(os->flags & OCPIF_HAS_IDLEST))
+		return 0;
+
+	/* XXX check module SIDLEMODE */
+
+	/* XXX check clock enable states */
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+						 oh->prcm.omap2.idlest_reg_id,
+						 oh->prcm.omap2.idlest_idle_bit);
+#if 0
+	} else if (cpu_is_omap44xx()) {
+		ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs,
+						 oh->prcm.omap4.device_offs);
+#endif
+	} else {
+		BUG();
+	};
+
+	return ret;
+}
+
+/**
+ * _reset - reset an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
+ * enabled for this to work.  Must be called with omap_hwmod_mutex
+ * held.  Returns -EINVAL if the hwmod cannot be reset this way or if
+ * the hwmod is in the wrong state, -ETIMEDOUT if the module did not
+ * reset in time, or 0 upon success.
+ */
+static int _reset(struct omap_hwmod *oh)
+{
+	u32 r, v;
+	int c;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
+	    (oh->sysconfig->sysc_flags & SYSS_MISSING))
+		return -EINVAL;
+
+	/* clocks must be on for this operation */
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: reset can only be entered from "
+		     "enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
+
+	v = oh->_sysc_cache;
+	r = _set_softreset(oh, &v);
+	if (r)
+		return r;
+	_write_sysconfig(v, oh);
+
+	c = 0;
+	while (c < MAX_MODULE_RESET_WAIT &&
+	       !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
+		 SYSS_RESETDONE_MASK)) {
+		udelay(1);
+		c++;
+	}
+
+	if (c == MAX_MODULE_RESET_WAIT)
+		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
+		     oh->name, MAX_MODULE_RESET_WAIT);
+	else
+		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name,
+			 MAX_MODULE_RESET_WAIT);
+
+	/*
+	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
+	 * _wait_target_ready() or _reset()
+	 */
+
+	return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
+}
+
+/**
+ * _enable - enable an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
+ * register target.  Must be called with omap_hwmod_mutex held.
+ * Returns -EINVAL if the hwmod is in the wrong state or passes along
+ * the return value of _wait_target_ready().
+ */
+static int _enable(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (oh->_state != _HWMOD_STATE_INITIALIZED &&
+	    oh->_state != _HWMOD_STATE_IDLE &&
+	    oh->_state != _HWMOD_STATE_DISABLED) {
+		WARN(1, "omap_hwmod: %s: enabled state can only be entered "
+		     "from initialized, idle, or disabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
+
+	/* XXX mux balls */
+
+	_add_initiator_dep(oh, mpu_oh);
+	_enable_clocks(oh);
+
+	if (oh->sysconfig) {
+		if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+			_update_sysc_cache(oh);
+		_sysc_enable(oh);
+	}
+
+	r = _wait_target_ready(oh);
+	if (!r)
+		oh->_state = _HWMOD_STATE_ENABLED;
+
+	return r;
+}
+
+/**
+ * _idle - idle an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Idles an omap_hwmod @oh.  This should be called once the hwmod has
+ * no further work.  Returns -EINVAL if the hwmod is in the wrong
+ * state or returns 0.
+ */
+static int _idle(struct omap_hwmod *oh)
+{
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
+		     "enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: idling\n", oh->name);
+
+	if (oh->sysconfig)
+		_sysc_idle(oh);
+	_del_initiator_dep(oh, mpu_oh);
+	_disable_clocks(oh);
+
+	oh->_state = _HWMOD_STATE_IDLE;
+
+	return 0;
+}
+
+/**
+ * _shutdown - shutdown an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Shut down an omap_hwmod @oh.  This should be called when the driver
+ * used for the hwmod is removed or unloaded or if the driver is not
+ * used by the system.  Returns -EINVAL if the hwmod is in the wrong
+ * state or returns 0.
+ */
+static int _shutdown(struct omap_hwmod *oh)
+{
+	if (oh->_state != _HWMOD_STATE_IDLE &&
+	    oh->_state != _HWMOD_STATE_ENABLED) {
+		WARN(1, "omap_hwmod: %s: disabled state can only be entered "
+		     "from idle, or enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
+
+	if (oh->sysconfig)
+		_sysc_shutdown(oh);
+	_del_initiator_dep(oh, mpu_oh);
+	/* XXX what about the other system initiators here? DMA, tesla, d2d */
+	_disable_clocks(oh);
+	/* XXX Should this code also force-disable the optional clocks? */
+
+	/* XXX mux any associated balls to safe mode */
+
+	oh->_state = _HWMOD_STATE_DISABLED;
+
+	return 0;
+}
+
+/**
+ * _write_clockact_lock - set the module's clockactivity bits
+ * @oh: struct omap_hwmod *
+ * @clockact: CLOCKACTIVITY field bits
+ *
+ * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
+ * OCP_SYSCONFIG register.  Returns -EINVAL if the hwmod is in the
+ * wrong state or returns 0.
+ */
+static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact)
+{
+	u32 v;
+
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	v = oh->_sysc_cache;
+	_set_clockactivity(oh, clockact, &v);
+	_write_sysconfig(v, oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+
+/**
+ * _setup - do initial configuration of omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
+ * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex
+ * held.  Returns -EINVAL if the hwmod is in the wrong state or returns
+ * 0.
+ */
+static int _setup(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_ocp_if *os;
+	int i;
+
+	if (!oh)
+		return -EINVAL;
+
+	/* Set iclk autoidle mode */
+	if (oh->slaves_cnt > 0) {
+		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+			struct clk *c = os->_clk;
+
+			if (!c || IS_ERR(c))
+				continue;
+
+			if (os->flags & OCPIF_SWSUP_IDLE) {
+				/* XXX omap_iclk_deny_idle(c); */
+			} else {
+				/* XXX omap_iclk_allow_idle(c); */
+				clk_enable(c);
+			}
+		}
+	}
+
+	oh->_state = _HWMOD_STATE_INITIALIZED;
+
+	_enable(oh);
+
+	if (!(oh->flags & HWMOD_INIT_NO_RESET))
+		_reset(oh);
+
+	/* XXX OCP AUTOIDLE bit? */
+	/* XXX OCP ENAWAKEUP bit? */
+
+	if (!(oh->flags & HWMOD_INIT_NO_IDLE))
+		_idle(oh);
+
+	return 0;
+}
+
+
+
+/* Public functions */
+
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
+{
+	return __raw_readl(oh->_rt_va + reg_offs);
+}
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
+{
+	__raw_writel(v, oh->_rt_va + reg_offs);
+}
+
+/**
+ * omap_hwmod_register - register a struct omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod already
+ * has been registered by the same name; -EINVAL if the omap_hwmod is in the
+ * wrong state, or 0 on success.
+ *
+ * XXX The data should be copied into bootmem, so the original data
+ * should be marked __initdata and freed after init.  This would allow
+ * unneeded omap_hwmods to be freed on multi-OMAP configurations.  Note
+ * that the copy process would be relatively complex due to the large number
+ * of substructures.
+ */
+int omap_hwmod_register(struct omap_hwmod *oh)
+{
+	int ret, ms_id;
+
+	if (!oh || (oh->_state != _HWMOD_STATE_UNKNOWN))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+
+	pr_debug("omap_hwmod: %s: registering\n", oh->name);
+
+	if (_lookup(oh->name)) {
+		ret = -EEXIST;
+		goto ohr_unlock;
+	}
+
+	ms_id = _find_mpu_port_index(oh);
+	if (!IS_ERR_VALUE(ms_id)) {
+		oh->_mpu_port_index = ms_id;
+		oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+	} else {
+		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
+	}
+
+	list_add_tail(&oh->node, &omap_hwmod_list);
+
+	oh->_state = _HWMOD_STATE_REGISTERED;
+
+	ret = 0;
+
+ohr_unlock:
+	mutex_unlock(&omap_hwmod_mutex);
+	return ret;
+}
+
+/**
+ * omap_hwmod_lookup - look up a registered omap_hwmod by name
+ * @name: name of the omap_hwmod to look up
+ *
+ * Given a @name of an omap_hwmod, return a pointer to the registered
+ * struct omap_hwmod *, or NULL upon error.
+ */
+struct omap_hwmod *omap_hwmod_lookup(const char *name)
+{
+	struct omap_hwmod *oh;
+
+	if (!name)
+		return NULL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	oh = _lookup(name);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return oh;
+}
+
+/**
+ * omap_hwmod_for_each - call function for each registered omap_hwmod
+ * @fn: pointer to a callback function
+ *
+ * Call @fn for each registered omap_hwmod, passing @data to each
+ * function.  @fn must return 0 for success or any other value for
+ * failure.  If @fn returns non-zero, the iteration across omap_hwmods
+ * will stop and the non-zero return value will be passed to the
+ * caller of omap_hwmod_for_each().  @fn is called with
+ * omap_hwmod_for_each() held.
+ */
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
+{
+	struct omap_hwmod *temp_oh;
+	int ret;
+
+	if (!fn)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
+		ret = (*fn)(temp_oh);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return ret;
+}
+
+
+/**
+ * omap_hwmod_init - init omap_hwmod code and register hwmods
+ * @ohs: pointer to an array of omap_hwmods to register
+ *
+ * Intended to be called early in boot before the clock framework is
+ * initialized.  If @ohs is not null, will register all omap_hwmods
+ * listed in @ohs that are valid for this chip.  Returns -EINVAL if
+ * omap_hwmod_init() has already been called or 0 otherwise.
+ */
+int omap_hwmod_init(struct omap_hwmod **ohs)
+{
+	struct omap_hwmod *oh;
+	int r;
+
+	if (inited)
+		return -EINVAL;
+
+	inited = 1;
+
+	if (!ohs)
+		return 0;
+
+	oh = *ohs;
+	while (oh) {
+		if (omap_chip_is(oh->omap_chip)) {
+			r = omap_hwmod_register(oh);
+			WARN(r, "omap_hwmod: %s: omap_hwmod_register returned "
+			     "%d\n", oh->name, r);
+		}
+		oh = *++ohs;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_late_init - do some post-clock framework initialization
+ *
+ * Must be called after omap2_clk_init().  Resolves the struct clk names
+ * to struct clk pointers for each registered omap_hwmod.  Also calls
+ * _setup() on each hwmod.  Returns 0.
+ */
+int omap_hwmod_late_init(void)
+{
+	int r;
+
+	/* XXX check return value */
+	r = omap_hwmod_for_each(_init_clocks);
+	WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
+
+	mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
+	WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
+	     MPU_INITIATOR_NAME);
+
+	omap_hwmod_for_each(_setup);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_unregister - unregister an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Unregisters a previously-registered omap_hwmod @oh.  There's probably
+ * no use case for this, so it is likely to be removed in a later version.
+ *
+ * XXX Free all of the bootmem-allocated structures here when that is
+ * implemented.  Make it clear that core code is the only code that is
+ * expected to unregister modules.
+ */
+int omap_hwmod_unregister(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
+
+	mutex_lock(&omap_hwmod_mutex);
+	list_del(&oh->node);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_enable - enable an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Enable an omap_hwomd @oh.  Intended to be called by omap_device_enable().
+ * Returns -EINVAL on error or passes along the return value from _enable().
+ */
+int omap_hwmod_enable(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	r = _enable(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return r;
+}
+
+/**
+ * omap_hwmod_idle - idle an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Idle an omap_hwomd @oh.  Intended to be called by omap_device_idle().
+ * Returns -EINVAL on error or passes along the return value from _idle().
+ */
+int omap_hwmod_idle(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_idle(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_shutdown - shutdown an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Shutdown an omap_hwomd @oh.  Intended to be called by
+ * omap_device_shutdown().  Returns -EINVAL on error or passes along
+ * the return value from _shutdown().
+ */
+int omap_hwmod_shutdown(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_shutdown(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_enable_clocks - enable main_clk, all interface clocks
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by the omap_device code.
+ */
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
+{
+	mutex_lock(&omap_hwmod_mutex);
+	_enable_clocks(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_disable_clocks - disable main_clk, all interface clocks
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by the omap_device code.
+ */
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
+{
+	mutex_lock(&omap_hwmod_mutex);
+	_disable_clocks(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete
+ * @oh: struct omap_hwmod *oh
+ *
+ * Intended to be called by drivers and core code when all posted
+ * writes to a device must complete before continuing further
+ * execution (for example, after clearing some device IRQSTATUS
+ * register bits)
+ *
+ * XXX what about targets with multiple OCP threads?
+ */
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
+{
+	BUG_ON(!oh);
+
+	if (!oh->sysconfig || !oh->sysconfig->sysc_flags) {
+		WARN(1, "omap_device: %s: OCP barrier impossible due to "
+		      "device configuration\n", oh->name);
+		return;
+	}
+
+	/*
+	 * Forces posted writes to complete on the OCP thread handling
+	 * register writes
+	 */
+	omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
+}
+
+/**
+ * omap_hwmod_reset - reset the hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Under some conditions, a driver may wish to reset the entire device.
+ * Called from omap_device code.  Returns -EINVAL on error or passes along
+ * the return value from _reset()/_enable().
+ */
+int omap_hwmod_reset(struct omap_hwmod *oh)
+{
+	int r;
+
+	if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	r = _reset(oh);
+	if (!r)
+		r = _enable(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return r;
+}
+
+/**
+ * omap_hwmod_count_resources - count number of struct resources needed by hwmod
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the first element of an array of struct resource to fill
+ *
+ * Count the number of struct resource array elements necessary to
+ * contain omap_hwmod @oh resources.  Intended to be called by code
+ * that registers omap_devices.  Intended to be used to determine the
+ * size of a dynamically-allocated struct resource array, before
+ * calling omap_hwmod_fill_resources().  Returns the number of struct
+ * resource array elements needed.
+ *
+ * XXX This code is not optimized.  It could attempt to merge adjacent
+ * resource IDs.
+ *
+ */
+int omap_hwmod_count_resources(struct omap_hwmod *oh)
+{
+	int ret, i;
+
+	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
+
+	for (i = 0; i < oh->slaves_cnt; i++)
+		ret += (*oh->slaves + i)->addr_cnt;
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_fill_resources - fill struct resource array with hwmod data
+ * @oh: struct omap_hwmod *
+ * @res: pointer to the first element of an array of struct resource to fill
+ *
+ * Fill the struct resource array @res with resource data from the
+ * omap_hwmod @oh.  Intended to be called by code that registers
+ * omap_devices.  See also omap_hwmod_count_resources().  Returns the
+ * number of array elements filled.
+ */
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
+{
+	int i, j;
+	int r = 0;
+
+	/* For each IRQ, DMA, memory area, fill in array.*/
+
+	for (i = 0; i < oh->mpu_irqs_cnt; i++) {
+		(res + r)->start = *(oh->mpu_irqs + i);
+		(res + r)->end = *(oh->mpu_irqs + i);
+		(res + r)->flags = IORESOURCE_IRQ;
+		r++;
+	}
+
+	for (i = 0; i < oh->sdma_chs_cnt; i++) {
+		(res + r)->name = (oh->sdma_chs + i)->name;
+		(res + r)->start = (oh->sdma_chs + i)->dma_ch;
+		(res + r)->end = (oh->sdma_chs + i)->dma_ch;
+		(res + r)->flags = IORESOURCE_DMA;
+		r++;
+	}
+
+	for (i = 0; i < oh->slaves_cnt; i++) {
+		struct omap_hwmod_ocp_if *os;
+
+		os = *oh->slaves + i;
+
+		for (j = 0; j < os->addr_cnt; j++) {
+			(res + r)->start = (os->addr + j)->pa_start;
+			(res + r)->end = (os->addr + j)->pa_end;
+			(res + r)->flags = IORESOURCE_MEM;
+			r++;
+		}
+	}
+
+	return r;
+}
+
+/**
+ * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
+ * @oh: struct omap_hwmod *
+ *
+ * Return the powerdomain pointer associated with the OMAP module
+ * @oh's main clock.  If @oh does not have a main clk, return the
+ * powerdomain associated with the interface clock associated with the
+ * module's MPU port. (XXX Perhaps this should use the SDMA port
+ * instead?)  Returns NULL on error, or a struct powerdomain * on
+ * success.
+ */
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
+{
+	struct clk *c;
+
+	if (!oh)
+		return NULL;
+
+	if (oh->_clk) {
+		c = oh->_clk;
+	} else {
+		if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+			return NULL;
+		c = oh->slaves[oh->_mpu_port_index]->_clk;
+	}
+
+	return c->clkdm->pwrdm.ptr;
+
+}
+
+/**
+ * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
+ * @oh: struct omap_hwmod *
+ * @init_oh: struct omap_hwmod * (initiator)
+ *
+ * Add a sleep dependency between the initiator @init_oh and @oh.
+ * Intended to be called by DSP/Bridge code via platform_data for the
+ * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
+ * code needs to add/del initiator dependencies dynamically
+ * before/after accessing a device.  Returns the return value from
+ * _add_initiator_dep().
+ *
+ * XXX Keep a usecount in the clockdomain code
+ */
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh)
+{
+	return _add_initiator_dep(oh, init_oh);
+}
+
+/*
+ * XXX what about functions for drivers to save/restore ocp_sysconfig
+ * for context save/restore operations?
+ */
+
+/**
+ * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh
+ * @oh: struct omap_hwmod *
+ * @init_oh: struct omap_hwmod * (initiator)
+ *
+ * Remove a sleep dependency between the initiator @init_oh and @oh.
+ * Intended to be called by DSP/Bridge code via platform_data for the
+ * DSP case; and by the DMA code in the sDMA case.  DMA code, *Bridge
+ * code needs to add/del initiator dependencies dynamically
+ * before/after accessing a device.  Returns the return value from
+ * _del_initiator_dep().
+ *
+ * XXX Keep a usecount in the clockdomain code
+ */
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh)
+{
+	return _del_initiator_dep(oh, init_oh);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to BOTH
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to MAIN
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to ICLK
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK);
+}
+
+/**
+ * omap_hwmod_set_clockact_none - set clockactivity test to NONE
+ * @oh: struct omap_hwmod *
+ *
+ * On some modules, this function can affect the wakeup latency vs.
+ * power consumption balance.  Intended to be called by the
+ * omap_device layer.  Passes along the return value from
+ * _write_clockact_lock().
+ */
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh)
+{
+	return _write_clockact_lock(oh, CLOCKACT_TEST_NONE);
+}
+
+/**
+ * omap_hwmod_enable_wakeup - allow device to wake up the system
+ * @oh: struct omap_hwmod *
+ *
+ * Sets the module OCP socket ENAWAKEUP bit to allow the module to
+ * send wakeups to the PRCM.  Eventually this should sets PRCM wakeup
+ * registers to cause the PRCM to receive wakeup events from the
+ * module.  Does not set any wakeup routing registers beyond this
+ * point - if the module is to wake up any other module or subsystem,
+ * that must be set separately.  Called by omap_device code.  Returns
+ * -EINVAL on error or 0 upon success.
+ */
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_enable_wakeup(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
+
+/**
+ * omap_hwmod_disable_wakeup - prevent device from waking the system
+ * @oh: struct omap_hwmod *
+ *
+ * Clears the module OCP socket ENAWAKEUP bit to prevent the module
+ * from sending wakeups to the PRCM.  Eventually this should clear
+ * PRCM wakeup registers to cause the PRCM to ignore wakeup events
+ * from the module.  Does not set any wakeup routing registers beyond
+ * this point - if the module is to wake up any other module or
+ * subsystem, that must be set separately.  Called by omap_device
+ * code.  Returns -EINVAL on error or 0 upon success.
+ */
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP))
+		return -EINVAL;
+
+	mutex_lock(&omap_hwmod_mutex);
+	_disable_wakeup(oh);
+	mutex_unlock(&omap_hwmod_mutex);
+
+	return 0;
+}
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/mach/omap_hwmod.h
new file mode 100644
index 00000000000..1f79c20e292
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_hwmod.h
@@ -0,0 +1,447 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+
+#include <mach/cpu.h>
+
+struct omap_device;
+
+/* OCP SYSCONFIG bit shifts/masks */
+#define SYSC_MIDLEMODE_SHIFT		12
+#define SYSC_MIDLEMODE_MASK		(0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_CLOCKACTIVITY_SHIFT	8
+#define SYSC_CLOCKACTIVITY_MASK		(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_SIDLEMODE_SHIFT		3
+#define SYSC_SIDLEMODE_MASK		(0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_ENAWAKEUP_SHIFT		2
+#define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_SOFTRESET_SHIFT		1
+#define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT		0
+#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE		(1 << 0)
+#define HWMOD_IDLEMODE_NO		(1 << 1)
+#define HWMOD_IDLEMODE_SMART		(1 << 2)
+
+
+/**
+ * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_ch: DMA channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+	const char	*name;
+	u16		dma_ch;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clkdev_dev_id: opt clock: clkdev dev_id string
+ * @clkdev_con_id: opt clock: clkdev con_id string
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+	const char	*role;
+	const char	*clkdev_dev_id;
+	const char	*clkdev_con_id;
+	struct clk	*_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3		(1 << 0)
+#define OMAP_FIREWALL_L4		(1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+	u8 l3_perm_bit;
+	u8 l4_fw_region;
+	u8 l4_prot_group;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT	(1 << 0)
+#define ADDR_TYPE_RT		(1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure.  GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+	u32 pa_start;
+	u32 pa_end;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod.  Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU			(1 << 0)
+#define OCP_USER_SDMA			(1 << 1)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_HAS_IDLEST		(1 << 0)
+#define OCPIF_SWSUP_IDLE		(1 << 1)
+#define OCPIF_CAN_BURST			(1 << 2)
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clkdev_dev_id: interface clock: clkdev dev_id string
+ * @clkdev_con_id: interface clock: clkdev con_id string
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @addr_cnt: ARRAY_SIZE(@addr)
+ * @width: OCP data width
+ * @thread_cnt: number of threads
+ * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+	struct omap_hwmod		*master;
+	struct omap_hwmod		*slave;
+	struct omap_hwmod_addr_space	*addr;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	union {
+		struct omap_hwmod_omap2_firewall omap2;
+	}				fw;
+	u8				addr_cnt;
+	u8				width;
+	u8				thread_cnt;
+	u8				max_burst_len;
+	u8				user;
+	u8				flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT	2
+#define SLAVE_IDLE_SHIFT	0
+#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE	(1 << 0)
+#define SYSC_HAS_SOFTRESET	(1 << 1)
+#define SYSC_HAS_ENAWAKEUP	(1 << 2)
+#define SYSC_HAS_EMUFREE	(1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
+#define SYSC_HAS_SIDLEMODE	(1 << 5)
+#define SYSC_HAS_MIDLEMODE	(1 << 6)
+#define SYSS_MISSING		(1 << 7)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH	0x0
+#define CLOCKACT_TEST_MAIN	0x1
+#define CLOCKACT_TEST_ICLK	0x2
+#define CLOCKACT_TEST_NONE	0x3
+
+/**
+ * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module.  Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact.  This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ */
+struct omap_hwmod_sysconfig {
+	u16 rev_offs;
+	u16 sysc_offs;
+	u16 syss_offs;
+	u8 idlemodes;
+	u8 sysc_flags;
+	u8 clockact;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers.  In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+	s16 module_offs;
+	u8 prcm_reg_id;
+	u8 module_bit;
+	u8 idlest_reg_id;
+	u8 idlest_idle_bit;
+	u8 idlest_stdby_bit;
+};
+
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
+ * @device_offs: device register offset from @module_offs
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ */
+struct omap_hwmod_omap4_prcm {
+	u32 module_offs;
+	u16 device_offs;
+	u8 submodule_wkdep_bit;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ *     of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ *     of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ *     SDRAM controller, etc.
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ *     controller, etc.
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ */
+#define HWMOD_SWSUP_SIDLE			(1 << 0)
+#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
+#define HWMOD_INIT_NO_RESET			(1 << 2)
+#define HWMOD_INIT_NO_IDLE			(1 << 3)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ */
+#define _HWMOD_NO_MPU_PORT			(1 << 0)
+#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ *              (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN			0
+#define _HWMOD_STATE_REGISTERED			1
+#define _HWMOD_STATE_CLKS_INITED		2
+#define _HWMOD_STATE_INITIALIZED		3
+#define _HWMOD_STATE_ENABLED			4
+#define _HWMOD_STATE_IDLE			5
+#define _HWMOD_STATE_DISABLED			6
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
+ * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @prcm: PRCM data pertaining to this hwmod
+ * @clkdev_dev_id: main clock: clkdev dev_id string
+ * @clkdev_con_id: main clock: clkdev con_id string
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @masters: ptr to array of OCP ifs that this hwmod can initiate on
+ * @slaves: ptr to array of OCP ifs that this hwmod can respond on
+ * @sysconfig: device SYSCONFIG/SYSSTATUS register data
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_rt_va: cached register target start address (internal use)
+ * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
+ * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
+ * @mpu_irqs_cnt: number of @mpu_irqs
+ * @sdma_chs_cnt: number of @sdma_chs
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @flags: hwmod flags (documented below)
+ * @omap_chip: OMAP chips this hwmod is present on
+ * @node: list node for hwmod list (internal use)
+ *
+ * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
+ * clock," which for our purposes is defined as "the functional clock needed
+ * for register accesses to complete."  Modules may not have a main clock if
+ * the interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod {
+	const char			*name;
+	struct omap_device		*od;
+	u8				*mpu_irqs;
+	struct omap_hwmod_dma_info	*sdma_chs;
+	union {
+		struct omap_hwmod_omap2_prcm omap2;
+		struct omap_hwmod_omap4_prcm omap4;
+	}				prcm;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	struct omap_hwmod_opt_clk	*opt_clks;
+	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
+	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
+	struct omap_hwmod_sysconfig	*sysconfig;
+	void				*dev_attr;
+	u32				_sysc_cache;
+	void __iomem			*_rt_va;
+	struct list_head		node;
+	u16				flags;
+	u8				_mpu_port_index;
+	u8				msuspendmux_reg_id;
+	u8				msuspendmux_shift;
+	u8				response_lat;
+	u8				mpu_irqs_cnt;
+	u8				sdma_chs_cnt;
+	u8				opt_clks_cnt;
+	u8				masters_cnt;
+	u8				slaves_cnt;
+	u8				hwmods_cnt;
+	u8				_int_flags;
+	u8				_state;
+	const struct omap_chip_id	omap_chip;
+};
+
+int omap_hwmod_init(struct omap_hwmod **ohs);
+int omap_hwmod_register(struct omap_hwmod *oh);
+int omap_hwmod_unregister(struct omap_hwmod *oh);
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
+int omap_hwmod_late_init(void);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+#endif
-- 
cgit v1.2.3


From 02bfc030e4417003b7a94393102c92e39b2dfa65 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:05 +0300
Subject: OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects

Connect the omap_hwmod code to the kernel boot.  Create some basic
interconnect and device structures for OMAP2/3 chips.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/io.c              |  17 +++-
 arch/arm/mach-omap2/omap_hwmod.c      |   3 +-
 arch/arm/mach-omap2/omap_hwmod_2420.h | 141 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_2430.h | 143 +++++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_34xx.h | 168 ++++++++++++++++++++++++++++++++++
 5 files changed, 469 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-omap2/omap_hwmod_2420.h
 create mode 100644 arch/arm/mach-omap2/omap_hwmod_2430.h
 create mode 100644 arch/arm/mach-omap2/omap_hwmod_34xx.h

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 470b1d10c4e..7574b6f20e8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -39,12 +39,16 @@
 
 #include <mach/omap-pm.h>
 #include <mach/powerdomain.h>
-
 #include "powerdomains.h"
 
 #include <mach/clockdomain.h>
 #include "clockdomains.h"
 #endif
+#include <mach/omap_hwmod.h>
+#include "omap_hwmod_2420.h"
+#include "omap_hwmod_2430.h"
+#include "omap_hwmod_34xx.h"
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -281,6 +285,16 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
+	struct omap_hwmod **hwmods = NULL;
+
+	if (cpu_is_omap2420())
+		hwmods = omap2420_hwmods;
+	else if (cpu_is_omap2430())
+		hwmods = omap2430_hwmods;
+	else if (cpu_is_omap34xx())
+		hwmods = omap34xx_hwmods;
+
+	omap_hwmod_init(hwmods);
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	/* The OPP tables have to be registered before a clk init */
@@ -289,6 +303,7 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
 	omap_serial_early_init();
+	omap_hwmod_late_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 3b10ad6c47d..d2e0f1c9596 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -765,8 +765,7 @@ static int _reset(struct omap_hwmod *oh)
 		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
 		     oh->name, MAX_MODULE_RESET_WAIT);
 	else
-		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name,
-			 MAX_MODULE_RESET_WAIT);
+		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h
new file mode 100644
index 00000000000..767e4965ac4
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2420.h
@@ -0,0 +1,141 @@
+/*
+ * omap_hwmod_2420.h - hardware modules present on the OMAP2420 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2420_H
+
+#ifdef CONFIG_ARCH_OMAP2420
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2420_mpu_hwmod;
+static struct omap_hwmod omap2420_l3_hwmod;
+static struct omap_hwmod omap2420_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
+	.master	= &omap2420_l3_hwmod,
+	.slave	= &omap2420_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
+	.master = &omap2420_mpu_hwmod,
+	.slave	= &omap2420_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
+	&omap2420_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2420_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2420_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
+	.slaves		= omap2420_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+static struct omap_hwmod omap2420_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
+	.master	= &omap2420_l4_core_hwmod,
+	.slave	= &omap2420_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
+	&omap2420_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2420_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2420_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
+	.slaves		= omap2420_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
+	&omap2420_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2420_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2420_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
+	.slaves		= omap2420_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
+	&omap2420_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2420_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2420_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+static __initdata struct omap_hwmod *omap2420_hwmods[] = {
+	&omap2420_l3_hwmod,
+	&omap2420_l4_core_hwmod,
+	&omap2420_l4_wkup_hwmod,
+	&omap2420_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2420_hwmods		0
+#endif
+
+#endif
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h
new file mode 100644
index 00000000000..a412be6420e
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_2430.h
@@ -0,0 +1,143 @@
+/*
+ * omap_hwmod_2430.h - hardware modules present on the OMAP2430 chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX handle crossbar/shared link difference for L3?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD2430_H
+
+#ifdef CONFIG_ARCH_OMAP2430
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-24xx.h"
+
+static struct omap_hwmod omap2430_mpu_hwmod;
+static struct omap_hwmod omap2430_l3_hwmod;
+static struct omap_hwmod omap2430_l4_core_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
+	.master	= &omap2430_l3_hwmod,
+	.slave	= &omap2430_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
+	.master = &omap2430_mpu_hwmod,
+	.slave	= &omap2430_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
+	&omap2430_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* L3 */
+static struct omap_hwmod omap2430_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap2430_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
+	.slaves		= omap2430_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+static struct omap_hwmod omap2430_l4_wkup_hwmod;
+static struct omap_hwmod omap2430_mmc1_hwmod;
+static struct omap_hwmod omap2430_mmc2_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
+	.master	= &omap2430_l4_core_hwmod,
+	.slave	= &omap2430_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
+	&omap2430_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap2430_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap2430_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
+	.slaves		= omap2430_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
+	&omap2430_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap2430_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap2430_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
+	.slaves		= omap2430_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
+	&omap2430_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap2430_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "mpu_ck",
+	.masters	= omap2430_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+static __initdata struct omap_hwmod *omap2430_hwmods[] = {
+	&omap2430_l3_hwmod,
+	&omap2430_l4_core_hwmod,
+	&omap2430_l4_wkup_hwmod,
+	&omap2430_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap2430_hwmods		0
+#endif
+
+#endif
+
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
new file mode 100644
index 00000000000..1e069f83157
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h
@@ -0,0 +1,168 @@
+/*
+ * omap_hwmod_34xx.h - hardware modules present on the OMAP34xx chips
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD34XX_H
+
+#ifdef CONFIG_ARCH_OMAP34XX
+
+#include <mach/omap_hwmod.h>
+#include <mach/irqs.h>
+#include <mach/cpu.h>
+#include <mach/dma.h>
+
+#include "prm-regbits-34xx.h"
+
+static struct omap_hwmod omap34xx_mpu_hwmod;
+static struct omap_hwmod omap34xx_l3_hwmod;
+static struct omap_hwmod omap34xx_l4_core_hwmod;
+static struct omap_hwmod omap34xx_l4_per_hwmod;
+
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_core = {
+	.master	= &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_core_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap34xx_l3__l4_per = {
+	.master = &omap34xx_l3_hwmod,
+	.slave	= &omap34xx_l4_per_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap34xx_mpu__l3 = {
+	.master = &omap34xx_mpu_hwmod,
+	.slave	= &omap34xx_l3_hwmod,
+	.user	= OCP_USER_MPU,
+};
+
+/* Slave interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_slaves[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* Master interfaces on the L3 interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l3_masters[] = {
+	&omap34xx_l3__l4_core,
+	&omap34xx_l3__l4_per,
+};
+
+/* L3 */
+static struct omap_hwmod omap34xx_l3_hwmod = {
+	.name		= "l3_hwmod",
+	.masters	= omap34xx_l3_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l3_masters),
+	.slaves		= omap34xx_l3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+static struct omap_hwmod omap34xx_l4_wkup_hwmod;
+
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__l4_wkup = {
+	.master	= &omap34xx_l4_core_hwmod,
+	.slave	= &omap34xx_l4_wkup_hwmod,
+	.user	= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* Slave interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_slaves[] = {
+	&omap34xx_l3__l4_core,
+};
+
+/* Master interfaces on the L4_CORE interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_core_masters[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* L4 CORE */
+static struct omap_hwmod omap34xx_l4_core_hwmod = {
+	.name		= "l4_core_hwmod",
+	.masters	= omap34xx_l4_core_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_core_masters),
+	.slaves		= omap34xx_l4_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_slaves[] = {
+	&omap34xx_l3__l4_per,
+};
+
+/* Master interfaces on the L4_PER interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_per_masters[] = {
+};
+
+/* L4 PER */
+static struct omap_hwmod omap34xx_l4_per_hwmod = {
+	.name		= "l4_per_hwmod",
+	.masters	= omap34xx_l4_per_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_per_masters),
+	.slaves		= omap34xx_l4_per_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_per_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Slave interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_slaves[] = {
+	&omap34xx_l4_core__l4_wkup,
+};
+
+/* Master interfaces on the L4_WKUP interconnect */
+static struct omap_hwmod_ocp_if *omap34xx_l4_wkup_masters[] = {
+};
+
+/* L4 WKUP */
+static struct omap_hwmod omap34xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup_hwmod",
+	.masters	= omap34xx_l4_wkup_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_masters),
+	.slaves		= omap34xx_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap34xx_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* Master interfaces on the MPU device */
+static struct omap_hwmod_ocp_if *omap34xx_mpu_masters[] = {
+	&omap34xx_mpu__l3,
+};
+
+/* MPU */
+static struct omap_hwmod omap34xx_mpu_hwmod = {
+	.name		= "mpu_hwmod",
+	.clkdev_dev_id	= NULL,
+	.clkdev_con_id	= "arm_fck",
+	.masters	= omap34xx_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap34xx_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+	&omap34xx_l3_hwmod,
+	&omap34xx_l4_core_hwmod,
+	&omap34xx_l4_per_hwmod,
+	&omap34xx_l4_wkup_hwmod,
+	&omap34xx_mpu_hwmod,
+	NULL,
+};
+
+#else
+# define omap34xx_hwmods		0
+#endif
+
+#endif
+
+
-- 
cgit v1.2.3


From b04b65ab5b4fc86af073424af6295be4e067adf3 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Thu, 3 Sep 2009 20:14:05 +0300
Subject: OMAP2/3/4 core: create omap_device layer

The omap_device code provides a mapping of omap_hwmod structures into
the platform_device system, and includes some details on external
(board-level) integration.  This allows drivers to enable, idle, and
shutdown on-chip device resources, including clocks, regulators, etc.
The resources enabled and idled are dependent on the device's maximum
wakeup latency constraint (if present).

At the moment, omap_device functions are intended to be called from
platform_data function pointers.  Ideally in the future these
functions will be called from either subarchitecture-specific
platform_data activate, deactivate functions, or via an custom
bus/device type for OMAP.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Vikram Pandita <vikram.pandita@ti.com>
Cc: Sakari Poussa <sakari.poussa@nokia.com>
Cc: Anand Sawant <sawant@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Eric Thomas <ethomas@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
---
 arch/arm/plat-omap/Makefile                   |   4 +
 arch/arm/plat-omap/include/mach/omap_device.h | 141 ++++++
 arch/arm/plat-omap/omap_device.c              | 687 ++++++++++++++++++++++++++
 3 files changed, 832 insertions(+)
 create mode 100644 arch/arm/plat-omap/include/mach/omap_device.h
 create mode 100644 arch/arm/plat-omap/omap_device.c

(limited to 'arch')

diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 5e10d0a2eb8..98f01910c2c 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -12,6 +12,10 @@ obj-  :=
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
+# omap_device support (OMAP2+ only at the moment)
+obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
 obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/mach/omap_device.h
new file mode 100644
index 00000000000..bd0e136db33
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap_device.h
@@ -0,0 +1,141 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/omap_hwmod.h>
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN	0
+#define OMAP_DEVICE_STATE_ENABLED	1
+#define OMAP_DEVICE_STATE_IDLE		2
+#define OMAP_DEVICE_STATE_SHUTDOWN	3
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in microseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+	struct platform_device		pdev;
+	struct omap_hwmod		**hwmods;
+	struct omap_device_pm_latency	*pm_lats;
+	u32				dev_wakeup_lat;
+	u32				_dev_wakeup_lat_limit;
+	u8				pm_lats_cnt;
+	s8				pm_lat_level;
+	u8				hwmods_cnt;
+	u8				_state;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+int omap_device_count_resources(struct omap_device *od);
+int omap_device_fill_resources(struct omap_device *od, struct resource *res);
+
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt);
+
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **oh, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt);
+
+int omap_device_register(struct omap_device *od);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+	u32 deactivate_lat;
+	int (*deactivate_func)(struct omap_device *od);
+	u32 activate_lat;
+	int (*activate_func)(struct omap_device *od);
+};
+
+
+#endif
+
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
new file mode 100644
index 00000000000..2c409fc6dd2
--- /dev/null
+++ b/arch/arm/plat-omap/omap_device.c
@@ -0,0 +1,687 @@
+/*
+ * omap_device implementation
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code provides a consistent interface for OMAP device drivers
+ * to control power management and interconnect properties of their
+ * devices.
+ *
+ * In the medium- to long-term, this code should either be
+ * a) implemented via arch-specific pointers in platform_data
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_data func pointers
+ *
+ *
+ * Guidelines for usage by driver authors:
+ *
+ * 1. These functions are intended to be used by device drivers via
+ * function pointers in struct platform_data.  As an example,
+ * omap_device_enable() should be passed to the driver as
+ *
+ * struct foo_driver_platform_data {
+ * ...
+ *      int (*device_enable)(struct platform_device *pdev);
+ * ...
+ * }
+ *
+ * Note that the generic "device_enable" name is used, rather than
+ * "omap_device_enable".  This is so other architectures can pass in their
+ * own enable/disable functions here.
+ *
+ * This should be populated during device setup:
+ *
+ * ...
+ * pdata->device_enable = omap_device_enable;
+ * ...
+ *
+ * 2. Drivers should first check to ensure the function pointer is not null
+ * before calling it, as in:
+ *
+ * if (pdata->device_enable)
+ *     pdata->device_enable(pdev);
+ *
+ * This allows other architectures that don't use similar device_enable()/
+ * device_shutdown() functions to execute normally.
+ *
+ * ...
+ *
+ * Suggested usage by device drivers:
+ *
+ * During device initialization:
+ * device_enable()
+ *
+ * During device idle:
+ * (save remaining device context if necessary)
+ * device_idle();
+ *
+ * During device resume:
+ * device_enable();
+ * (restore context if necessary)
+ *
+ * During device shutdown:
+ * device_shutdown()
+ * (device must be reinitialized at this point to use it again)
+ *
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/omap_device.h>
+#include <mach/omap_hwmod.h>
+
+/* These parameters are passed to _omap_device_{de,}activate() */
+#define USE_WAKEUP_LAT			0
+#define IGNORE_WAKEUP_LAT		1
+
+/* XXX this should be moved into a separate file */
+#if defined(CONFIG_ARCH_OMAP2420)
+# define OMAP_32KSYNCT_BASE		0x48004000
+#elif defined(CONFIG_ARCH_OMAP2430)
+# define OMAP_32KSYNCT_BASE		0x49020000
+#elif defined(CONFIG_ARCH_OMAP3430)
+# define OMAP_32KSYNCT_BASE		0x48320000
+#else
+# error Unknown OMAP device
+#endif
+
+/* Private functions */
+
+/**
+ * _read_32ksynct - read the OMAP 32K sync timer
+ *
+ * Returns the current value of the 32KiHz synchronization counter.
+ * XXX this should be generalized to simply read the system clocksource.
+ * XXX this should be moved to a separate synctimer32k.c file
+ */
+static u32 _read_32ksynct(void)
+{
+	if (!cpu_class_is_omap2())
+		BUG();
+
+	return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
+}
+
+/**
+ * _omap_device_activate - increase device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: increase to latency target (0) or full readiness (1)?
+ *
+ * Increase readiness of omap_device @od (thus decreasing device
+ * wakeup latency, but consuming more power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully active.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is greater than the requested maximum wakeup latency, step
+ * backwards in the omap_device_pm_latency table to ensure the
+ * device's maximum wakeup latency is less than or equal to the
+ * requested maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
+{
+	u32 a, b;
+
+	pr_debug("omap_device: %s: activating\n", od->pdev.name);
+
+	while (od->pm_lat_level > 0) {
+		struct omap_device_pm_latency *odpl;
+		int act_lat = 0;
+
+		od->pm_lat_level--;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
+			break;
+
+		a = _read_32ksynct();
+
+		/* XXX check return code */
+		odpl->activate_func(od);
+
+		b = _read_32ksynct();
+
+		act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+		pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
+			 "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+
+		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
+		     "activate step %d took longer than expected (%d > %d)\n",
+		     od->pdev.name, od->pdev.id, od->pm_lat_level,
+		     act_lat, odpl->activate_lat);
+
+		od->dev_wakeup_lat -= odpl->activate_lat;
+	}
+
+	return 0;
+}
+
+/**
+ * _omap_device_deactivate - decrease device readiness
+ * @od: struct omap_device *
+ * @ignore_lat: decrease to latency target (0) or full inactivity (1)?
+ *
+ * Decrease readiness of omap_device @od (thus increasing device
+ * wakeup latency, but conserving power).  If @ignore_lat is
+ * IGNORE_WAKEUP_LAT, make the omap_device fully inactive.  Otherwise,
+ * if @ignore_lat is USE_WAKEUP_LAT, and the device's maximum wakeup
+ * latency is less than the requested maximum wakeup latency, step
+ * forwards in the omap_device_pm_latency table to ensure the device's
+ * maximum wakeup latency is less than or equal to the requested
+ * maximum wakeup latency.  Returns 0.
+ */
+static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
+{
+	u32 a, b;
+
+	pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+
+	while (od->pm_lat_level < od->pm_lats_cnt) {
+		struct omap_device_pm_latency *odpl;
+		int deact_lat = 0;
+
+		odpl = od->pm_lats + od->pm_lat_level;
+
+		if (!ignore_lat &&
+		    ((od->dev_wakeup_lat + odpl->activate_lat) >
+		     od->_dev_wakeup_lat_limit))
+			break;
+
+		a = _read_32ksynct();
+
+		/* XXX check return code */
+		odpl->deactivate_func(od);
+
+		b = _read_32ksynct();
+
+		deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+
+		pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
+			 "%d usec\n", od->pdev.name, od->pm_lat_level,
+			 deact_lat);
+
+		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
+		     "deactivate step %d took longer than expected (%d > %d)\n",
+		     od->pdev.name, od->pdev.id, od->pm_lat_level,
+		     deact_lat, odpl->deactivate_lat);
+
+		od->dev_wakeup_lat += odpl->activate_lat;
+
+		od->pm_lat_level++;
+	}
+
+	return 0;
+}
+
+static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
+{
+	return container_of(pdev, struct omap_device, pdev);
+}
+
+
+/* Public functions for use by core code */
+
+/**
+ * omap_device_count_resources - count number of struct resource entries needed
+ * @od: struct omap_device *
+ *
+ * Count the number of struct resource entries needed for this
+ * omap_device @od.  Used by omap_device_build_ss() to determine how
+ * much memory to allocate before calling
+ * omap_device_fill_resources().  Returns the count.
+ */
+int omap_device_count_resources(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int c = 0;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		c += omap_hwmod_count_resources(oh);
+
+	pr_debug("omap_device: %s: counted %d total resources across %d "
+		 "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+
+	return c;
+}
+
+/**
+ * omap_device_fill_resources - fill in array of struct resource
+ * @od: struct omap_device *
+ * @res: pointer to an array of struct resource to be filled in
+ *
+ * Populate one or more empty struct resource pointed to by @res with
+ * the resource data for this omap_device @od.  Used by
+ * omap_device_build_ss() after calling omap_device_count_resources().
+ * Ideally this function would not be needed at all.  If omap_device
+ * replaces platform_device, then we can specify our own
+ * get_resource()/ get_irq()/etc functions that use the underlying
+ * omap_hwmod information.  Or if platform_device is extended to use
+ * subarchitecture-specific function pointers, the various
+ * platform_device functions can simply call omap_device internal
+ * functions to get device resources.  Hacking around the existing
+ * platform_device code wastes memory.  Returns 0.
+ */
+int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+{
+	struct omap_hwmod *oh;
+	int c = 0;
+	int i, r;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) {
+		r = omap_hwmod_fill_resources(oh, res);
+		res += r;
+		c += r;
+	}
+
+	return 0;
+}
+
+/**
+ * omap_device_build - build and register an omap_device with one omap_hwmod
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering a single
+ * omap_device record, which in turn builds and registers a
+ * platform_device record.  See omap_device_build_ss() for more
+ * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
+ * passes along the return value of omap_device_build_ss().
+ */
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt)
+{
+	struct omap_hwmod *ohs[] = { oh };
+
+	if (!oh)
+		return ERR_PTR(-EINVAL);
+
+	return omap_device_build_ss(pdev_name, pdev_id, ohs, 1, pdata,
+				    pdata_len, pm_lats, pm_lats_cnt);
+}
+
+/**
+ * omap_device_build_ss - build and register an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for building and registering an omap_device
+ * subsystem record.  Subsystem records consist of multiple
+ * omap_hwmods.  This function in turn builds and registers a
+ * platform_device record.  Returns an ERR_PTR() on error, or passes
+ * along the return value of omap_device_register().
+ */
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **ohs, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt)
+{
+	int ret = -ENOMEM;
+	struct omap_device *od;
+	char *pdev_name2;
+	struct resource *res = NULL;
+	int res_count;
+	struct omap_hwmod **hwmods;
+
+	if (!ohs || oh_cnt == 0 || !pdev_name)
+		return ERR_PTR(-EINVAL);
+
+	if (!pdata && pdata_len > 0)
+		return ERR_PTR(-EINVAL);
+
+	pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
+		 oh_cnt);
+
+	od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+	if (!od)
+		return ERR_PTR(-ENOMEM);
+
+	od->hwmods_cnt = oh_cnt;
+
+	hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
+			 GFP_KERNEL);
+	if (!hwmods)
+		goto odbs_exit1;
+
+	memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
+	od->hwmods = hwmods;
+
+	pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
+	if (!pdev_name2)
+		goto odbs_exit2;
+	strcpy(pdev_name2, pdev_name);
+
+	od->pdev.name = pdev_name2;
+	od->pdev.id = pdev_id;
+
+	res_count = omap_device_count_resources(od);
+	if (res_count > 0) {
+		res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+		if (!res)
+			goto odbs_exit3;
+	}
+	omap_device_fill_resources(od, res);
+
+	od->pdev.num_resources = res_count;
+	od->pdev.resource = res;
+
+	platform_device_add_data(&od->pdev, pdata, pdata_len);
+
+	od->pm_lats = pm_lats;
+	od->pm_lats_cnt = pm_lats_cnt;
+
+	ret = omap_device_register(od);
+	if (ret)
+		goto odbs_exit4;
+
+	return od;
+
+odbs_exit4:
+	kfree(res);
+odbs_exit3:
+	kfree(pdev_name2);
+odbs_exit2:
+	kfree(hwmods);
+odbs_exit1:
+	kfree(od);
+
+	pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
+
+	return ERR_PTR(ret);
+}
+
+/**
+ * omap_device_register - register an omap_device with one omap_hwmod
+ * @od: struct omap_device * to register
+ *
+ * Register the omap_device structure.  This currently just calls
+ * platform_device_register() on the underlying platform_device.
+ * Returns the return value of platform_device_register().
+ */
+int omap_device_register(struct omap_device *od)
+{
+	pr_debug("omap_device: %s: registering\n", od->pdev.name);
+
+	return platform_device_register(&od->pdev);
+}
+
+
+/* Public functions for use by device drivers through struct platform_data */
+
+/**
+ * omap_device_enable - fully activate an omap_device
+ * @od: struct omap_device * to activate
+ *
+ * Do whatever is necessary for the hwmods underlying omap_device @od
+ * to be accessible and ready to operate.  This generally involves
+ * enabling clocks, setting SYSCONFIG registers; and in the future may
+ * involve remuxing pins.  Device drivers should call this function
+ * (through platform_data function pointers) where they would normally
+ * enable clocks, etc.  Returns -EINVAL if called when the omap_device
+ * is already enabled, or passes along the return value of
+ * _omap_device_activate().
+ */
+int omap_device_enable(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+		WARN(1, "omap_device: %s.%d: omap_device_enable() called from "
+		     "invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	/* Enable everything if we're enabling this device from scratch */
+	if (od->_state == OMAP_DEVICE_STATE_UNKNOWN)
+		od->pm_lat_level = od->pm_lats_cnt;
+
+	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
+
+	od->dev_wakeup_lat = 0;
+	od->_dev_wakeup_lat_limit = INT_MAX;
+	od->_state = OMAP_DEVICE_STATE_ENABLED;
+
+	return ret;
+}
+
+/**
+ * omap_device_idle - idle an omap_device
+ * @od: struct omap_device * to idle
+ *
+ * Idle omap_device @od by calling as many .deactivate_func() entries
+ * in the omap_device's pm_lats table as is possible without exceeding
+ * the device's maximum wakeup latency limit, pm_lat_limit.  Device
+ * drivers should call this function (through platform_data function
+ * pointers) where they would normally disable clocks after operations
+ * complete, etc..  Returns -EINVAL if the omap_device is not
+ * currently enabled, or passes along the return value of
+ * _omap_device_deactivate().
+ */
+int omap_device_idle(struct platform_device *pdev)
+{
+	int ret;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
+		WARN(1, "omap_device: %s.%d: omap_device_idle() called from "
+		     "invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+
+	od->_state = OMAP_DEVICE_STATE_IDLE;
+
+	return ret;
+}
+
+/**
+ * omap_device_shutdown - shut down an omap_device
+ * @od: struct omap_device * to shut down
+ *
+ * Shut down omap_device @od by calling all .deactivate_func() entries
+ * in the omap_device's pm_lats table and then shutting down all of
+ * the underlying omap_hwmods.  Used when a device is being "removed"
+ * or a device driver is being unloaded.  Returns -EINVAL if the
+ * omap_device is not currently enabled or idle, or passes along the
+ * return value of _omap_device_deactivate().
+ */
+int omap_device_shutdown(struct platform_device *pdev)
+{
+	int ret, i;
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
+	    od->_state != OMAP_DEVICE_STATE_IDLE) {
+		WARN(1, "omap_device: %s.%d: omap_device_shutdown() called "
+		     "from invalid state\n", od->pdev.name, od->pdev.id);
+		return -EINVAL;
+	}
+
+	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_shutdown(oh);
+
+	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
+
+	return ret;
+}
+
+/**
+ * omap_device_align_pm_lat - activate/deactivate device to match wakeup lat lim
+ * @od: struct omap_device *
+ *
+ * When a device's maximum wakeup latency limit changes, call some of
+ * the .activate_func or .deactivate_func function pointers in the
+ * omap_device's pm_lats array to ensure that the device's maximum
+ * wakeup latency is less than or equal to the new latency limit.
+ * Intended to be called by OMAP PM code whenever a device's maximum
+ * wakeup latency limit changes (e.g., via
+ * omap_pm_set_dev_wakeup_lat()).  Returns 0 if nothing needs to be
+ * done (e.g., if the omap_device is not currently idle, or if the
+ * wakeup latency is already current with the new limit) or passes
+ * along the return value of _omap_device_deactivate() or
+ * _omap_device_activate().
+ */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit)
+{
+	int ret = -EINVAL;
+	struct omap_device *od;
+
+	od = _find_by_pdev(pdev);
+
+	if (new_wakeup_lat_limit == od->dev_wakeup_lat)
+		return 0;
+
+	od->_dev_wakeup_lat_limit = new_wakeup_lat_limit;
+
+	if (od->_state != OMAP_DEVICE_STATE_IDLE)
+		return 0;
+	else if (new_wakeup_lat_limit > od->dev_wakeup_lat)
+		ret = _omap_device_deactivate(od, USE_WAKEUP_LAT);
+	else if (new_wakeup_lat_limit < od->dev_wakeup_lat)
+		ret = _omap_device_activate(od, USE_WAKEUP_LAT);
+
+	return ret;
+}
+
+/**
+ * omap_device_get_pwrdm - return the powerdomain * associated with @od
+ * @od: struct omap_device *
+ *
+ * Return the powerdomain associated with the first underlying
+ * omap_hwmod for this omap_device.  Intended for use by core OMAP PM
+ * code.  Returns NULL on error or a struct powerdomain * upon
+ * success.
+ */
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
+{
+	/*
+	 * XXX Assumes that all omap_hwmod powerdomains are identical.
+	 * This may not necessarily be true.  There should be a sanity
+	 * check in here to WARN() if any difference appears.
+	 */
+	if (!od->hwmods_cnt)
+		return NULL;
+
+	return omap_hwmod_get_pwrdm(od->hwmods[0]);
+}
+
+/*
+ * Public functions intended for use in omap_device_pm_latency
+ * .activate_func and .deactivate_func function pointers
+ */
+
+/**
+ * omap_device_enable_hwmods - call omap_hwmod_enable() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Enable all underlying hwmods.  Returns 0.
+ */
+int omap_device_enable_hwmods(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_enable(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
+ * @od: struct omap_device *od
+ *
+ * Idle all underlying hwmods.  Returns 0.
+ */
+int omap_device_idle_hwmods(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_idle(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_disable_clocks - disable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Disable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_disable_clocks(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_disable_clocks(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
+
+/**
+ * omap_device_enable_clocks - enable all main and interface clocks
+ * @od: struct omap_device *od
+ *
+ * Enable the main functional clock and interface clock for all of the
+ * omap_hwmods associated with the omap_device.  Returns 0.
+ */
+int omap_device_enable_clocks(struct omap_device *od)
+{
+	struct omap_hwmod *oh;
+	int i;
+
+	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
+		omap_hwmod_enable_clocks(oh);
+
+	/* XXX pass along return value here? */
+	return 0;
+}
-- 
cgit v1.2.3


From ca4caa4e1d45f9542fa54263974d0ef637157b4a Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Thu, 3 Sep 2009 20:14:06 +0300
Subject: OMAP clock: use debugfs_remove_recursive() for rewinding

Rewinding each debugfs entries to unregister if an error happens.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index e8c327a45a5..bf880e966d3 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -488,7 +488,7 @@ static int __init clk_debugfs_init(void)
 	}
 	return 0;
 err_out:
-	debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+	debugfs_remove_recursive(clk_debugfs_root);
 	return err;
 }
 late_initcall(clk_debugfs_init);
-- 
cgit v1.2.3


From 8adf65cfae2d6c2ec5c06e4521f089c62f9eff05 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 3 Sep 2009 21:26:34 +0200
Subject: x86, msr: Fix msr-reg.S compilation with gas 2.16.1, on 32-bit too

The macro was defined in the 32-bit path as well - breaking the
build on 32-bit platforms:

  arch/x86/lib/msr-reg.S: Assembler messages:
  arch/x86/lib/msr-reg.S:53: Error: Bad macro parameter list
  arch/x86/lib/msr-reg.S:100: Error: invalid character '_' in mnemonic
  arch/x86/lib/msr-reg.S:101: Error: invalid character '_' in mnemonic

Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <tip-f6909f394c2d4a0a71320797df72d54c49c5927e@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/msr-reg.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index d5eaf53aa67..69fa10623f2 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -50,7 +50,7 @@ ENDPROC(native_\op\()_safe_regs)
 
 #else /* X86_32 */
 
-.macro op_safe_regs op:req
+.macro op_safe_regs op
 ENTRY(native_\op\()_safe_regs)
 	CFI_STARTPROC
 	pushl_cfi %ebx
-- 
cgit v1.2.3


From 1ea0d14e480c245683927eecc03a70faf06e80c8 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 3 Sep 2009 12:27:15 -0700
Subject: x86/i386: Make sure stack-protector segment base is cache aligned

The Intel Optimization Reference Guide says:

	In Intel Atom microarchitecture, the address generation unit
	assumes that the segment base will be 0 by default. Non-zero
	segment base will cause load and store operations to experience
	a delay.
		- If the segment base isn't aligned to a cache line
		  boundary, the max throughput of memory operations is
		  reduced to one [e]very 9 cycles.
	[...]
	Assembly/Compiler Coding Rule 15. (H impact, ML generality)
	For Intel Atom processors, use segments with base set to 0
	whenever possible; avoid non-zero segment base address that is
	not aligned to cache line boundary at all cost.

We can't avoid having a non-zero base for the stack-protector
segment, but we can make it cache-aligned.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: <stable@kernel.org>
LKML-Reference: <4AA01893.6000507@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h      | 12 +++++++++++-
 arch/x86/include/asm/stackprotector.h |  4 ++--
 arch/x86/include/asm/system.h         |  2 +-
 arch/x86/kernel/cpu/common.c          |  2 +-
 arch/x86/kernel/head_32.S             |  1 -
 5 files changed, 15 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c7768269b1c..e597ecc8753 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -403,7 +403,17 @@ extern unsigned long kernel_eflags;
 extern asmlinkage void ignore_sysret(void);
 #else	/* X86_64 */
 #ifdef CONFIG_CC_STACKPROTECTOR
-DECLARE_PER_CPU(unsigned long, stack_canary);
+/*
+ * Make sure stack canary segment base is cached-aligned:
+ *   "For Intel Atom processors, avoid non zero segment base address
+ *    that is not aligned to cache line boundary at all cost."
+ * (Optim Ref Manual Assembly/Compiler Coding Rule 15.)
+ */
+struct stack_canary {
+	char __pad[20];		/* canary at %gs:20 */
+	unsigned long canary;
+};
+DECLARE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
 #endif
 #endif	/* X86_64 */
 
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 44efdff3975..15751776356 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -78,14 +78,14 @@ static __always_inline void boot_init_stack_canary(void)
 #ifdef CONFIG_X86_64
 	percpu_write(irq_stack_union.stack_canary, canary);
 #else
-	percpu_write(stack_canary, canary);
+	percpu_write(stack_canary.canary, canary);
 #endif
 }
 
 static inline void setup_stack_canary_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
-	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu) - 20;
+	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
 	struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
 	struct desc_struct desc;
 
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 75c49c782e2..f08f9737489 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -31,7 +31,7 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 	"movl %P[task_canary](%[next]), %%ebx\n\t"			\
 	"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
 #define __switch_canary_oparam						\
-	, [stack_canary] "=m" (per_cpu_var(stack_canary))
+	, [stack_canary] "=m" (per_cpu_var(stack_canary.canary))
 #define __switch_canary_iparam						\
 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
 #else	/* CC_STACKPROTECTOR */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index ced07ba5e93..7d84bc4c118 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1043,7 +1043,7 @@ DEFINE_PER_CPU(struct orig_ist, orig_ist);
 #else	/* CONFIG_X86_64 */
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-DEFINE_PER_CPU(unsigned long, stack_canary);
+DEFINE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
 #endif
 
 /* Make sure %fs and %gs are initialized properly in idle threads */
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index cc827ac9e8d..7ffec6b3b33 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -439,7 +439,6 @@ is386:	movl $2,%ecx		# set MP
 	jne 1f
 	movl $per_cpu__gdt_page,%eax
 	movl $per_cpu__stack_canary,%ecx
-	subl $20, %ecx
 	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
 	shrl $16, %ecx
 	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
-- 
cgit v1.2.3


From 4a376ec3a2599c02207cd4cbd5dbf73783548463 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:40:21 +0200
Subject: x86: Fix CPU llc_shared_map information for AMD Magny-Cours

Construct entire NodeID and use it as cpu_llc_id. Thus internal node
siblings are stored in llc_shared_map.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/cpufeature.h |  1 +
 arch/x86/kernel/cpu/amd.c         | 64 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 64 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4a28d22d479..847fee6493a 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -95,6 +95,7 @@
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
 #define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
 #define X86_FEATURE_EXTD_APICID	(3*32+26) /* has extended APICID (8 bits) */
+#define X86_FEATURE_AMD_DCM     (3*32+27) /* multi-node processor */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 0a717fc6aeb..a76d2c18f15 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -250,6 +250,64 @@ static int __cpuinit nearby_node(int apicid)
 }
 #endif
 
+/*
+ * Fixup core topology information for AMD multi-node processors.
+ * Assumption 1: Number of cores in each internal node is the same.
+ * Assumption 2: Mixed systems with both single-node and dual-node
+ *               processors are not supported.
+ */
+#ifdef CONFIG_X86_HT
+static void __cpuinit amd_fixup_dcm(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_PCI
+	u32 t, cpn;
+	u8 n, n_id;
+	int cpu = smp_processor_id();
+
+	/* fixup topology information only once for a core */
+	if (cpu_has(c, X86_FEATURE_AMD_DCM))
+		return;
+
+	/* check for multi-node processor on boot cpu */
+	t = read_pci_config(0, 24, 3, 0xe8);
+	if (!(t & (1 << 29)))
+		return;
+
+	set_cpu_cap(c, X86_FEATURE_AMD_DCM);
+
+	/* cores per node: each internal node has half the number of cores */
+	cpn = c->x86_max_cores >> 1;
+
+	/* even-numbered NB_id of this dual-node processor */
+	n = c->phys_proc_id << 1;
+
+	/*
+	 * determine internal node id and assign cores fifty-fifty to
+	 * each node of the dual-node processor
+	 */
+	t = read_pci_config(0, 24 + n, 3, 0xe8);
+	n = (t>>30) & 0x3;
+	if (n == 0) {
+		if (c->cpu_core_id < cpn)
+			n_id = 0;
+		else
+			n_id = 1;
+	} else {
+		if (c->cpu_core_id < cpn)
+			n_id = 1;
+		else
+			n_id = 0;
+	}
+
+	/* compute entire NodeID, use llc_shared_map to store sibling info */
+	per_cpu(cpu_llc_id, cpu) = (c->phys_proc_id << 1) + n_id;
+
+	/* fixup core id to be in range from 0 to cpn */
+	c->cpu_core_id = c->cpu_core_id % cpn;
+#endif
+}
+#endif
+
 /*
  * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
  * Assumes number of cores is a power of two.
@@ -267,6 +325,9 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 	c->phys_proc_id = c->initial_apicid >> bits;
 	/* use socket ID also for last level cache */
 	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
+	/* fixup topology information on multi-node processors */
+	if ((c->x86 == 0x10) && (c->x86_model == 9))
+		amd_fixup_dcm(c);
 #endif
 }
 
@@ -277,7 +338,8 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 	int node;
 	unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
 
-	node = c->phys_proc_id;
+	node = per_cpu(cpu_llc_id, cpu);
+
 	if (apicid_to_node[apicid] != NUMA_NO_NODE)
 		node = apicid_to_node[apicid];
 	if (!node_online(node)) {
-- 
cgit v1.2.3


From a326e948c538e8ce998f30d92e146ecea8a30421 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:41:19 +0200
Subject: x86, cacheinfo: Fixup L3 cache information for AMD multi-node
 processors

L3 cache size, associativity and shared_cpu information need to be
adapted to show information for an internal node instead of the
entire physical package.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/intel_cacheinfo.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 789efe217e1..cb98a73e516 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -241,7 +241,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	case 0:
 		if (!l1->val)
 			return;
-		assoc = l1->assoc;
+		assoc = assocs[l1->assoc];
 		line_size = l1->line_size;
 		lines_per_tag = l1->lines_per_tag;
 		size_in_kb = l1->size_in_kb;
@@ -249,7 +249,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	case 2:
 		if (!l2.val)
 			return;
-		assoc = l2.assoc;
+		assoc = assocs[l2.assoc];
 		line_size = l2.line_size;
 		lines_per_tag = l2.lines_per_tag;
 		/* cpu_data has errata corrections for K7 applied */
@@ -258,10 +258,14 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	case 3:
 		if (!l3.val)
 			return;
-		assoc = l3.assoc;
+		assoc = assocs[l3.assoc];
 		line_size = l3.line_size;
 		lines_per_tag = l3.lines_per_tag;
 		size_in_kb = l3.size_encoded * 512;
+		if (boot_cpu_has(X86_FEATURE_AMD_DCM)) {
+			size_in_kb = size_in_kb >> 1;
+			assoc = assoc >> 1;
+		}
 		break;
 	default:
 		return;
@@ -270,18 +274,14 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	eax->split.is_self_initializing = 1;
 	eax->split.type = types[leaf];
 	eax->split.level = levels[leaf];
-	if (leaf == 3)
-		eax->split.num_threads_sharing =
-			current_cpu_data.x86_max_cores - 1;
-	else
-		eax->split.num_threads_sharing = 0;
+	eax->split.num_threads_sharing = 0;
 	eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1;
 
 
-	if (assoc == 0xf)
+	if (assoc == 0xffff)
 		eax->split.is_fully_associative = 1;
 	ebx->split.coherency_line_size = line_size - 1;
-	ebx->split.ways_of_associativity = assocs[assoc] - 1;
+	ebx->split.ways_of_associativity = assoc - 1;
 	ebx->split.physical_line_partition = lines_per_tag - 1;
 	ecx->split.number_of_sets = (size_in_kb * 1024) / line_size /
 		(ebx->split.ways_of_associativity + 1) - 1;
@@ -522,6 +522,18 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 	int index_msb, i;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
+	if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+		struct cpuinfo_x86 *d;
+		for_each_online_cpu(i) {
+			if (!per_cpu(cpuid4_info, i))
+				continue;
+			d = &cpu_data(i);
+			this_leaf = CPUID4_INFO_IDX(i, index);
+			cpumask_copy(to_cpumask(this_leaf->shared_cpu_map),
+				     d->llc_shared_map);
+		}
+		return;
+	}
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
 
-- 
cgit v1.2.3


From cb9805ab5b97079f69a21b6b4e344a69d5c96157 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:42:20 +0200
Subject: x86, mcheck: Use correct cpumask for shared bank4

This fixes threshold_bank4 support on multi-node processors.

The correct mask to use is llc_shared_map, representing an internal
node on Magny-Cours.

We need to create 2 sets of symlinks for sibling shared banks -- one
set for each internal node, symlinks of each set should target the
first core on same internal node.

Currently only one set is created where all symlinks are targeting
the first core of the entire socket.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index ddae21620bd..1fecba404fd 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -489,12 +489,14 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	int i, err = 0;
 	struct threshold_bank *b = NULL;
 	char name[32];
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
 
 	sprintf(name, "threshold_bank%i", bank);
 
 #ifdef CONFIG_SMP
 	if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) {	/* symlink */
-		i = cpumask_first(cpu_core_mask(cpu));
+		i = cpumask_first(c->llc_shared_map);
 
 		/* first core not up yet */
 		if (cpu_data(i).cpu_core_id)
@@ -514,7 +516,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (err)
 			goto out;
 
-		cpumask_copy(b->cpus, cpu_core_mask(cpu));
+		cpumask_copy(b->cpus, c->llc_shared_map);
 		per_cpu(threshold_banks, cpu)[bank] = b;
 
 		goto out;
@@ -539,7 +541,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 #ifndef CONFIG_SMP
 	cpumask_setall(b->cpus);
 #else
-	cpumask_copy(b->cpus, cpu_core_mask(cpu));
+	cpumask_copy(b->cpus, c->llc_shared_map);
 #endif
 
 	per_cpu(threshold_banks, cpu)[bank] = b;
-- 
cgit v1.2.3


From 5a925b4282d7f805deafde62001a83dbaf8be275 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:44:28 +0200
Subject: x86, sched: Workaround broken sched domain creation for AMD
 Magny-Cours

Current sched domain creation code can't handle multi-node processors.
When switching to power_savings scheduling errors show up and
system might hang later on (due to broken sched domain hierarchy):

  # echo 0  >> /sys/devices/system/cpu/sched_mc_power_savings
  CPU0 attaching sched-domain:
   domain 0: span 0-5 level MC
    groups: 0 1 2 3 4 5
    domain 1: span 0-23 level NODE
     groups: 0-5 6-11 18-23 12-17
  ...
  # echo 1  >> /sys/devices/system/cpu/sched_mc_power_savings
  CPU0 attaching sched-domain:
   domain 0: span 0-11 level MC
    groups: 0 1 2 3 4 5 6 7 8 9 10 11
  ERROR: parent span is not a superset of domain->span
    domain 1: span 0-5 level CPU
  ERROR: domain->groups does not contain CPU0
     groups: 6-11 (__cpu_power = 12288)
  ERROR: groups don't span domain->span
     domain 2: span 0-23 level NODE
      groups:
  ERROR: domain->cpu_power not set

  ERROR: groups don't span domain->span
  ...

Fixing all aspects of power-savings scheduling for Magny-Cours needs
some larger changes in the sched domain creation code.

As a short-term and temporary workaround avoid the problems by
extending "the worst possible hack" ;-(
and always use llc_shared_map on AMD Magny-Cours when MC domain span
is calculated.

With this I get:

  # echo 1  >> /sys/devices/system/cpu/sched_mc_power_savings
  CPU0 attaching sched-domain:
   domain 0: span 0-5 level MC
    groups: 0 1 2 3 4 5
    domain 1: span 0-5 level CPU
     groups: 0-5 (__cpu_power = 6144)
     domain 2: span 0-23 level NODE
      groups: 0-5 (__cpu_power = 6144) 6-11 (__cpu_power = 6144) 18-23 (__cpu_power = 6144) 12-17 (__cpu_power = 6144)
  ...

I.e. no errors during sched domain creation, no system hangs, and also
mc_power_savings scheduling works to a certain extend.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/smpboot.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda69ee6..c36cc1452cd 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -434,7 +434,8 @@ const struct cpumask *cpu_coregroup_mask(int cpu)
 	 * For perf, we return last level cache shared map.
 	 * And for power savings, we return cpu_core_map
 	 */
-	if (sched_mc_power_savings || sched_smt_power_savings)
+	if ((sched_mc_power_savings || sched_smt_power_savings) &&
+	    !(cpu_has(c, X86_FEATURE_AMD_DCM)))
 		return cpu_core_mask(cpu);
 	else
 		return c->llc_shared_map;
-- 
cgit v1.2.3


From 53f824520b6d84ca5b4a8fd71addc91dbf64357e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 3 Sep 2009 14:31:44 -0700
Subject: x86/i386: Put aligned stack-canary in percpu shared_aligned section

Pack aligned things together into a special section to minimize
padding holes.

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <4AA035C0.9070202@goop.org>
[ queued up in tip:x86/asm because it depends on this commit:
  x86/i386: Make sure stack-protector segment base is cache aligned ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h | 2 +-
 arch/x86/kernel/cpu/common.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index e597ecc8753..ac7e79654f3 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -413,7 +413,7 @@ struct stack_canary {
 	char __pad[20];		/* canary at %gs:20 */
 	unsigned long canary;
 };
-DECLARE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
+DECLARE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
 #endif
 #endif	/* X86_64 */
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 7d84bc4c118..f23e236391a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1043,7 +1043,7 @@ DEFINE_PER_CPU(struct orig_ist, orig_ist);
 #else	/* CONFIG_X86_64 */
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-DEFINE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
+DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
 #endif
 
 /* Make sure %fs and %gs are initialized properly in idle threads */
-- 
cgit v1.2.3


From 747b50aaf728987732e6ff3ba10aba4acc4e0277 Mon Sep 17 00:00:00 2001
From: "markus.t.metzger@intel.com" <markus.t.metzger@intel.com>
Date: Wed, 2 Sep 2009 16:04:46 +0200
Subject: x86, perf_counter, bts: Fail if BTS is not available

Reserve PERF_COUNT_HW_BRANCH_INSTRUCTIONS with sample_period ==
1 for BTS tracing and fail, if BTS is not available.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090902140612.943801000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 396e35db705..2f41874ffb8 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -769,7 +769,7 @@ static int reserve_bts_hardware(void)
 	int cpu, err = 0;
 
 	if (!bts_available())
-		return -EOPNOTSUPP;
+		return 0;
 
 	get_online_cpus();
 
@@ -914,7 +914,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 			if (!reserve_pmc_hardware())
 				err = -EBUSY;
 			else
-				reserve_bts_hardware();
+				err = reserve_bts_hardware();
 		}
 		if (!err)
 			atomic_inc(&active_counters);
@@ -979,6 +979,13 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	if (config == -1LL)
 		return -EINVAL;
 
+	/*
+	 * Branch tracing:
+	 */
+	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
+	    (hwc->sample_period == 1) && !bts_available())
+		return -EOPNOTSUPP;
+
 	hwc->config |= config;
 
 	return 0;
@@ -1355,19 +1362,9 @@ static int x86_pmu_enable(struct perf_counter *counter)
 
 	idx = fixed_mode_idx(counter, hwc);
 	if (idx == X86_PMC_IDX_FIXED_BTS) {
-		/*
-		 * Try to use BTS for branch tracing. If that is not
-		 * available, try to get a generic counter.
-		 */
-		if (unlikely(!cpuc->ds))
-			goto try_generic;
-
-		/*
-		 * Try to get the fixed counter, if that is already taken
-		 * then try to get a generic counter:
-		 */
+		/* BTS is already occupied. */
 		if (test_and_set_bit(idx, cpuc->used_mask))
-			goto try_generic;
+			return -EAGAIN;
 
 		hwc->config_base	= 0;
 		hwc->counter_base	= 0;
-- 
cgit v1.2.3


From 596da17f94c103348ebe04129c00d536ea0e80e2 Mon Sep 17 00:00:00 2001
From: "markus.t.metzger@intel.com" <markus.t.metzger@intel.com>
Date: Wed, 2 Sep 2009 16:04:47 +0200
Subject: x86, perf_counter, bts: Correct pointer-to-u64 casts

On 32bit, pointers in the DS AREA configuration are cast to
u64. The current (long) cast to avoid compiler warnings results
in a signed 64bit address.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090902140615.305889000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 2f41874ffb8..3776b0b630c 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -726,7 +726,8 @@ static inline void init_debug_store_on_cpu(int cpu)
 		return;
 
 	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
-		     (u32)((u64)(long)ds), (u32)((u64)(long)ds >> 32));
+		     (u32)((u64)(unsigned long)ds),
+		     (u32)((u64)(unsigned long)ds >> 32));
 }
 
 static inline void fini_debug_store_on_cpu(int cpu)
@@ -757,7 +758,7 @@ static void release_bts_hardware(void)
 
 		per_cpu(cpu_hw_counters, cpu).ds = NULL;
 
-		kfree((void *)(long)ds->bts_buffer_base);
+		kfree((void *)(unsigned long)ds->bts_buffer_base);
 		kfree(ds);
 	}
 
@@ -788,7 +789,7 @@ static int reserve_bts_hardware(void)
 			break;
 		}
 
-		ds->bts_buffer_base = (u64)(long)buffer;
+		ds->bts_buffer_base = (u64)(unsigned long)buffer;
 		ds->bts_index = ds->bts_buffer_base;
 		ds->bts_absolute_maximum =
 			ds->bts_buffer_base + BTS_BUFFER_SIZE;
@@ -1491,7 +1492,7 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
 	};
 	struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
 	unsigned long orig_ip = data->regs->ip;
-	u64 at;
+	struct bts_record *at, *top;
 
 	if (!counter)
 		return;
@@ -1499,19 +1500,18 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
 	if (!ds)
 		return;
 
-	for (at = ds->bts_buffer_base;
-	     at < ds->bts_index;
-	     at += sizeof(struct bts_record)) {
-		struct bts_record *rec = (struct bts_record *)(long)at;
+	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
+	top = (struct bts_record *)(unsigned long)ds->bts_index;
 
-		data->regs->ip	= rec->from;
-		data->addr	= rec->to;
+	ds->bts_index = ds->bts_buffer_base;
+
+	for (; at < top; at++) {
+		data->regs->ip	= at->from;
+		data->addr	= at->to;
 
 		perf_counter_output(counter, 1, data);
 	}
 
-	ds->bts_index = ds->bts_buffer_base;
-
 	data->regs->ip	= orig_ip;
 	data->addr	= 0;
 
-- 
cgit v1.2.3


From 1653192f510bd8114b7b133d7289e6e5c3e95046 Mon Sep 17 00:00:00 2001
From: "markus.t.metzger@intel.com" <markus.t.metzger@intel.com>
Date: Wed, 2 Sep 2009 16:04:48 +0200
Subject: x86, perf_counter, bts: Do not allow kernel BTS tracing for now

Kernel BTS tracing generates too much data too fast for us to
handle, causing the kernel to hang.

Fail for BTS requests for kernel code.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zjilstra@chello.nl>
LKML-Reference: <20090902140616.901253000@intel.com>
[ This is really a workaround - but we want BTS tracing in .32
  so make sure we dont regress. The lockup should be fixed
  ASAP. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 3776b0b630c..f9cd0849bd4 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -984,8 +984,15 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	 * Branch tracing:
 	 */
 	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
-	    (hwc->sample_period == 1) && !bts_available())
-		return -EOPNOTSUPP;
+	    (hwc->sample_period == 1)) {
+		/* BTS is not supported by this architecture. */
+		if (!bts_available())
+			return -EOPNOTSUPP;
+
+		/* BTS is currently only allowed for user-mode. */
+		if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+			return -EOPNOTSUPP;
+	}
 
 	hwc->config |= config;
 
-- 
cgit v1.2.3


From 0d96b9ff748b5f57d6f1d6d21209f5745245aadc Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 29 Aug 2009 13:17:14 -0700
Subject: x86: Use hard_smp_processor_id() to get apic id for AMD K8 cpus

Otherwise, system with apci id lifting will have wrong apicid in
/proc/cpuinfo.

and use that in srat_detect_node().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4A998CCA.1040407@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/amd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index a76d2c18f15..e1600c775e1 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -336,7 +336,7 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	int cpu = smp_processor_id();
 	int node;
-	unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
+	unsigned apicid = c->apicid;
 
 	node = per_cpu(cpu_llc_id, cpu);
 
@@ -481,6 +481,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+	/* get apicid instead of initial apic id from cpuid */
+	c->apicid = hard_smp_processor_id();
 #else
 
 	/*
-- 
cgit v1.2.3


From 47734f89be0614b5acbd6a532390f9c72f019648 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 4 Sep 2009 11:21:24 +0200
Subject: sched: Clean up topology.h

Re-organize the flag settings so that it's visible at a glance
which sched-domains flags are set and which not.

With the new balancer code we'll need to re-tune these details
anyway, so make it cleaner to make fewer mistakes down the
road ;-)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/topology.h | 47 ++++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 066ef590d7e..be29eb81fb0 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -129,25 +129,34 @@ extern unsigned long node_remap_size[];
 #endif
 
 /* sched_domains SD_NODE_INIT for NUMA machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= SD_CACHE_NICE_TRIES,	\
-	.busy_idx		= 3,			\
-	.idle_idx		= SD_IDLE_IDX,		\
-	.newidle_idx		= SD_NEWIDLE_IDX,	\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= SD_FORKEXEC_IDX,	\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_WAKE_AFFINE	\
-				| SD_WAKE_BALANCE	\
-				| SD_SERIALIZE,		\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
+#define SD_NODE_INIT (struct sched_domain) {				\
+	.min_interval		= 8,					\
+	.max_interval		= 32,					\
+	.busy_factor		= 32,					\
+	.imbalance_pct		= 125,					\
+	.cache_nice_tries	= SD_CACHE_NICE_TRIES,			\
+	.busy_idx		= 3,					\
+	.idle_idx		= SD_IDLE_IDX,				\
+	.newidle_idx		= SD_NEWIDLE_IDX,			\
+	.wake_idx		= 1,					\
+	.forkexec_idx		= SD_FORKEXEC_IDX,			\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 0*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_WAKE_IDLE			\
+				| 1*SD_WAKE_AFFINE			\
+				| 1*SD_WAKE_BALANCE			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 0*SD_POWERSAVINGS_BALANCE		\
+				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 1*SD_SERIALIZE			\
+				| 0*SD_WAKE_IDLE_FAR			\
+				| 0*SD_PREFER_SIBLING			\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
 }
 
 #ifdef CONFIG_X86_64_ACPI_NUMA
-- 
cgit v1.2.3


From 840a0653100dbde599ae8ddf83fa214dfa5fd1aa Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 4 Sep 2009 11:32:54 +0200
Subject: sched: Turn on SD_BALANCE_NEWIDLE

Start the re-tuning of the balancer by turning on newidle.

It improves hackbench performance and parallelism on a 4x4 box.
The "perf stat --repeat 10" measurements give us:

  domain0             domain1
  .......................................
 -SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2041.273208  task-clock-msecs         #      9.354 CPUs    ( +-   0.363% )

 +SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2086.326925  task-clock-msecs         #     11.934 CPUs    ( +-   0.301% )

 +SD_BALANCE_NEWIDLE +SD_BALANCE_NEWIDLE:
   2115.289791  task-clock-msecs         #     12.158 CPUs    ( +-   0.263% )

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/topology.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index be29eb81fb0..ef7bc7fc252 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -142,7 +142,7 @@ extern unsigned long node_remap_size[];
 	.forkexec_idx		= SD_FORKEXEC_IDX,			\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
-				| 0*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_WAKE_IDLE			\
-- 
cgit v1.2.3


From 825c9fb47a0837db12fecf8d360e0e1d284ddb49 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Fri, 4 Sep 2009 02:56:22 -0700
Subject: sparc: add basic support for 'perf'

This wires up the perf_counter_open() syscall so that basic
software support for perf is working.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig                    | 2 ++
 arch/sparc/include/asm/perf_counter.h | 8 ++++++++
 arch/sparc/include/asm/unistd.h       | 3 ++-
 arch/sparc/kernel/systbls_32.S        | 2 +-
 arch/sparc/kernel/systbls_64.S        | 4 ++--
 5 files changed, 15 insertions(+), 4 deletions(-)
 create mode 100644 arch/sparc/include/asm/perf_counter.h

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index b847f880eec..2aa7cd39b48 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,6 +25,7 @@ config SPARC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select RTC_CLASS
 	select RTC_DRV_M48T59
+	select HAVE_PERF_COUNTERS
 
 config SPARC32
 	def_bool !64BIT
@@ -44,6 +45,7 @@ config SPARC64
 	select RTC_DRV_BQ4802
 	select RTC_DRV_SUN4V
 	select RTC_DRV_STARFIRE
+	select HAVE_PERF_COUNTERS
 
 config ARCH_DEFCONFIG
 	string
diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
new file mode 100644
index 00000000000..f07c587a830
--- /dev/null
+++ b/arch/sparc/include/asm/perf_counter.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SPARC_PERF_COUNTER_H
+#define __ASM_SPARC_PERF_COUNTER_H
+
+static inline void set_perf_counter_pending(void) { }
+
+#define	PERF_COUNTER_INDEX_OFFSET	0
+
+#endif
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index b2c406de7d4..706df669f3b 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -395,8 +395,9 @@
 #define __NR_preadv		324
 #define __NR_pwritev		325
 #define __NR_rt_tgsigqueueinfo	326
+#define __NR_perf_counter_open	327
 
-#define NR_SYSCALLS		327
+#define NR_SYSCALLS		328
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 69090165729..04181577cb6 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -82,5 +82,5 @@ sys_call_table:
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
 
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 2ee7250ba7a..91b06b7f7ac 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -83,7 +83,7 @@ sys_call_table32:
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
-	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_counter_open
 
 #endif /* CONFIG_COMPAT */
 
@@ -158,4 +158,4 @@ sys_call_table:
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-	.word sys_pwritev, sys_rt_tgsigqueueinfo
+	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
-- 
cgit v1.2.3


From bd4352cadfacb9084c97c853b025fac010266c26 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 4 Sep 2009 03:38:54 -0700
Subject: sparc64: Fix bootup with mcount in some configs.

Functions invoked early when booting up a cpu can't use
tracing because mcount requires a valid 'current_thread_info()'
and TLB mappings to be setup.

The code path of sun4v_register_mondo_queues --> register_one_mondo
is one such case.  sun4v_register_mondo_queues already has the
necessary 'notrace' annotation, but register_one_mondo does not.

Normally register_one_mondo is inlined so the bug doesn't trigger,
but with some config/compiler combinations, it won't be so we
must properly mark it notrace.

While we're here, add 'notrace' annoations to prom_printf and
prom_halt so that early error handling won't have the same problem.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-by: Leif Sawyer <lsawyer@gci.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/irq_64.c | 2 +-
 arch/sparc/prom/misc_64.c  | 2 +-
 arch/sparc/prom/printf.c   | 7 +++----
 3 files changed, 5 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index f0ee7905540..8daab33fc17 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -886,7 +886,7 @@ void notrace init_irqwork_curcpu(void)
  * Therefore you cannot make any OBP calls, not even prom_printf,
  * from these two routines.
  */
-static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
+static void __cpuinit notrace register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
 {
 	unsigned long num_entries = (qmask + 1) / 64;
 	unsigned long status;
diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c
index eedffb4fec2..39fc6af21b7 100644
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@@ -88,7 +88,7 @@ void prom_cmdline(void)
 /* Drop into the prom, but completely terminate the program.
  * No chance of continuing.
  */
-void prom_halt(void)
+void notrace prom_halt(void)
 {
 #ifdef CONFIG_SUN_LDOMS
 	if (ldom_domaining_enabled)
diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c
index 660943ee4c2..ca869266b9f 100644
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@@ -14,14 +14,14 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/compiler.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 
 static char ppbuf[1024];
 
-void
-prom_write(const char *buf, unsigned int n)
+void notrace prom_write(const char *buf, unsigned int n)
 {
 	char ch;
 
@@ -33,8 +33,7 @@ prom_write(const char *buf, unsigned int n)
 	}
 }
 
-void
-prom_printf(const char *fmt, ...)
+void notrace prom_printf(const char *fmt, ...)
 {
 	va_list args;
 	int i;
-- 
cgit v1.2.3


From 8e019366ba749a536131cde1947af6dcaccf8e8f Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Thu, 27 Aug 2009 14:50:00 +0100
Subject: kmemleak: Don't scan uninitialized memory when kmemcheck is enabled

Ingo Molnar reported the following kmemcheck warning when running both
kmemleak and kmemcheck enabled:

  PM: Adding info for No Bus:vcsa7
  WARNING: kmemcheck: Caught 32-bit read from uninitialized memory
  (f6f6e1a4)
  d873f9f600000000c42ae4c1005c87f70000000070665f666978656400000000
   i i i i u u u u i i i i i i i i i i i i i i i i i i i i i u u u
           ^

  Pid: 3091, comm: kmemleak Not tainted (2.6.31-rc7-tip #1303) P4DC6
  EIP: 0060:[<c110301f>] EFLAGS: 00010006 CPU: 0
  EIP is at scan_block+0x3f/0xe0
  EAX: f40bd700 EBX: f40bd780 ECX: f16b46c0 EDX: 00000001
  ESI: f6f6e1a4 EDI: 00000000 EBP: f10f3f4c ESP: c2605fcc
   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  CR0: 8005003b CR2: e89a4844 CR3: 30ff1000 CR4: 000006f0
  DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
  DR6: ffff4ff0 DR7: 00000400
   [<c110313c>] scan_object+0x7c/0xf0
   [<c1103389>] kmemleak_scan+0x1d9/0x400
   [<c1103a3c>] kmemleak_scan_thread+0x4c/0xb0
   [<c10819d4>] kthread+0x74/0x80
   [<c10257db>] kernel_thread_helper+0x7/0x3c
   [<ffffffff>] 0xffffffff
  kmemleak: 515 new suspected memory leaks (see
  /sys/kernel/debug/kmemleak)
  kmemleak: 42 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The problem here is that kmemleak will scan partially initialized
objects that makes kmemcheck complain. Fix that up by skipping
uninitialized memory regions when kmemcheck is enabled.

Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 arch/x86/mm/kmemcheck/kmemcheck.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
index 2c55ed09865..528bf954eb7 100644
--- a/arch/x86/mm/kmemcheck/kmemcheck.c
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -331,6 +331,20 @@ static void kmemcheck_read_strict(struct pt_regs *regs,
 	kmemcheck_shadow_set(shadow, size);
 }
 
+bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
+{
+	enum kmemcheck_shadow status;
+	void *shadow;
+
+	shadow = kmemcheck_shadow_lookup(addr);
+	if (!shadow)
+		return true;
+
+	status = kmemcheck_shadow_test(shadow, size);
+
+	return status == KMEMCHECK_SHADOW_INITIALIZED;
+}
+
 /* Access may cross page boundary */
 static void kmemcheck_read(struct pt_regs *regs,
 	unsigned long addr, unsigned int size)
-- 
cgit v1.2.3


From b19ae3999891cad21a3995c34d313dda5df014e2 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 4 Sep 2009 10:00:09 -0700
Subject: x86, msr: change msr-reg.o to obj-y, and export its symbols

Change msr-reg.o to obj-y (it will be included in virtually every
kernel since it is used by the initialization code for AMD processors)
and add a separate C file to export its symbols to modules, so that
msr.ko can use them; on uniprocessors we bypass the helper functions
in msr.o and use the accessor functions directly via inlines.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <20090904140834.GA15789@elte.hu>
Cc: Borislav Petkov <petkovbb@googlemail.com>
---
 arch/x86/lib/Makefile         | 3 ++-
 arch/x86/lib/msr-reg-export.c | 5 +++++
 2 files changed, 7 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/lib/msr-reg-export.c

(limited to 'arch')

diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index b59c0647d80..9e609206fac 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -8,7 +8,8 @@ lib-y := delay.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
-lib-y += msr-reg.o
+
+obj-y += msr-reg.o msr-reg-export.o
 
 ifeq ($(CONFIG_X86_32),y)
         obj-y += atomic64_32.o
diff --git a/arch/x86/lib/msr-reg-export.c b/arch/x86/lib/msr-reg-export.c
new file mode 100644
index 00000000000..a311cc59b65
--- /dev/null
+++ b/arch/x86/lib/msr-reg-export.c
@@ -0,0 +1,5 @@
+#include <linux/module.h>
+#include <asm/msr.h>
+
+EXPORT_SYMBOL(native_rdmsr_safe_regs);
+EXPORT_SYMBOL(native_wrmsr_safe_regs);
-- 
cgit v1.2.3


From 7929eb9cf643ae416e5081b2a6fa558d37b9854c Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 3 Sep 2009 21:45:59 +0100
Subject: ARM: 5691/1: fix cache aliasing issues between kmap() and
 kmap_atomic() with highmem

Let's suppose a highmem page is kmap'd with kmap().  A pkmap entry is
used, the page mapped to it, and the virtual cache is dirtied.  Then
kunmap() is used which does virtually nothing except for decrementing a
usage count.

Then, let's suppose the _same_ page gets mapped using kmap_atomic().
It is therefore mapped onto a fixmap entry instead, which has a
different virtual address unaware of the dirty cache data for that page
sitting in the pkmap mapping.

Fortunately it is easy to know if a pkmap mapping still exists for that
page and use it directly with kmap_atomic(), thanks to kmap_high_get().

And actual testing with a printk in the added code path shows that this
condition is actually met *extremely* frequently.  Seems that we've been
quite lucky that things have worked so well with highmem so far.

Cc: stable@kernel.org
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/highmem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index a34954d9df7..73cae57fa70 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -40,11 +40,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
 {
 	unsigned int idx;
 	unsigned long vaddr;
+	void *kmap;
 
 	pagefault_disable();
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	kmap = kmap_high_get(page);
+	if (kmap)
+		return kmap;
+
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,6 +85,9 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 #else
 		(void) idx;  /* to kill a warning */
 #endif
+	} else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
+		/* this address was obtained through kmap_high_get() */
+		kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
 	}
 	pagefault_enable();
 }
-- 
cgit v1.2.3


From 81bd5f6c966cf2f137c2759dfc78abdffcff055e Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Sat, 5 Sep 2009 16:27:35 +1000
Subject: crypto: sha-s390 - Fix warnings in import function

That patch should fix the warnings.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha1_s390.c   | 4 ++--
 arch/s390/crypto/sha256_s390.c | 4 ++--
 arch/s390/crypto/sha512_s390.c | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 4a943789c20..f6de7826c97 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -57,10 +57,10 @@ static int sha1_export(struct shash_desc *desc, void *out)
 	return 0;
 }
 
-static int sha1_import(struct shash_desc *desc, const u8 *in)
+static int sha1_import(struct shash_desc *desc, const void *in)
 {
 	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
-	struct sha1_state *ictx = in;
+	const struct sha1_state *ictx = in;
 
 	sctx->count = ictx->count;
 	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 2bab5197789..61a7db37212 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -53,10 +53,10 @@ static int sha256_export(struct shash_desc *desc, void *out)
 	return 0;
 }
 
-static int sha256_import(struct shash_desc *desc, const u8 *in)
+static int sha256_import(struct shash_desc *desc, const void *in)
 {
 	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
-	struct sha256_state *ictx = in;
+	const struct sha256_state *ictx = in;
 
 	sctx->count = ictx->count;
 	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index b4b3438ae77..4bf73d0dc52 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -52,10 +52,10 @@ static int sha512_export(struct shash_desc *desc, void *out)
 	return 0;
 }
 
-static int sha512_import(struct shash_desc *desc, const u8 *in)
+static int sha512_import(struct shash_desc *desc, const void *in)
 {
 	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
-	struct sha512_state *ictx = in;
+	const struct sha512_state *ictx = in;
 
 	if (unlikely(ictx->count[1]))
 		return -ERANGE;
-- 
cgit v1.2.3


From b592e89ac9af521be164490e45c53c93e89c776f Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Tue, 18 Aug 2009 15:43:31 +0200
Subject: [SCSI] zfcp: Remove duplicated code for debug timestamps

The timestamp calculation used for s390dbf output is the same in a
private zfcp function and in debug.c. Replace both with a common
inline function.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 arch/s390/include/asm/timex.h | 8 ++++++++
 arch/s390/kernel/debug.c      | 8 +-------
 arch/s390/kernel/time.c       | 1 +
 3 files changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index cc21e3e20fd..a07e699bb65 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -88,6 +88,14 @@ int get_sync_clock(unsigned long long *clock);
 void init_cpu_timer(void);
 unsigned long long monotonic_clock(void);
 
+void tod_to_timeval(__u64, struct timespec *);
+
+static inline
+void stck_to_timespec(unsigned long long stck, struct timespec *ts)
+{
+	tod_to_timeval(stck - TOD_UNIX_EPOCH, ts);
+}
+
 extern u64 sched_clock_base_cc;
 
 #endif
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index be8bceaf37d..4c512561687 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -63,8 +63,6 @@ typedef struct
 } debug_sprintf_entry_t;
 
 
-extern void tod_to_timeval(uint64_t todval, struct timespec *xtime);
-
 /* internal function prototyes */
 
 static int debug_init(void);
@@ -1450,17 +1448,13 @@ debug_dflt_header_fn(debug_info_t * id, struct debug_view *view,
 			 int area, debug_entry_t * entry, char *out_buf)
 {
 	struct timespec time_spec;
-	unsigned long long time;
 	char *except_str;
 	unsigned long caller;
 	int rc = 0;
 	unsigned int level;
 
 	level = entry->id.fields.level;
-	time = entry->id.stck;
-	/* adjust todclock to 1970 */
-	time -= 0x8126d60e46000000LL - (0x3c26700LL * 1000000 * 4096);
-	tod_to_timeval(time, &time_spec);
+	stck_to_timespec(entry->id.stck, &time_spec);
 
 	if (entry->id.fields.exception)
 		except_str = "*";
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d4c8e9c47c8..9693d98d4d4 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -90,6 +90,7 @@ void tod_to_timeval(__u64 todval, struct timespec *xtime)
 	todval -= (sec * 1000000) << 12;
 	xtime->tv_nsec = ((todval * 1000) >> 12);
 }
+EXPORT_SYMBOL(tod_to_timeval);
 
 void clock_comparator_work(void)
 {
-- 
cgit v1.2.3


From 74a01180db4bbfd61304ae0ba1f60af55ffc803d Mon Sep 17 00:00:00 2001
From: Roderick Colenbrander <thunderbird2k@gmail.com>
Date: Thu, 3 Sep 2009 09:57:23 -0600
Subject: powerpc: Fix i8259 interrupt driver kernel crash on ML510

This patch fixes a null pointer exception caused by removal of
'ack()' for level interrupts in the Xilinx interrupt driver.  A recent
change to the xilinx interrupt controller removed the ack hook for
level irqs.

Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/sysdev/xilinx_intc.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index 3ee1fd37bbf..40edad52077 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -234,7 +234,6 @@ static void xilinx_i8259_cascade(unsigned int irq, struct irq_desc *desc)
 		generic_handle_irq(cascade_irq);
 
 	/* Let xilinx_intc end the interrupt */
-	desc->chip->ack(irq);
 	desc->chip->unmask(irq);
 }
 
-- 
cgit v1.2.3


From 23b6c52cf558f2a1dc6c7010c601b3624eb4591f Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 5 Sep 2009 01:07:45 +0200
Subject: x86: Decrease the level of some NUMA messages to KERN_DEBUG

Some NUMA messages in srat_32.c are confusing to users,
because they seem to indicate errors, while in fact they
reflect normal behaviour.

Decrease the level of these messages to KERN_DEBUG so that
they don't show up unnecessarily.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
LKML-Reference: <200909050107.45175.rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 29a0e37114f..6f8aa33031c 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -215,7 +215,7 @@ int __init get_memcfg_from_srat(void)
 		goto out_fail;
 
 	if (num_memory_chunks == 0) {
-		printk(KERN_WARNING
+		printk(KERN_DEBUG
 			 "could not find any ACPI SRAT memory areas.\n");
 		goto out_fail;
 	}
@@ -277,7 +277,7 @@ int __init get_memcfg_from_srat(void)
 	}
 	return 1;
 out_fail:
-	printk(KERN_ERR "failed to get NUMA memory information from SRAT"
+	printk(KERN_DEBUG "failed to get NUMA memory information from SRAT"
 			" table\n");
 	return 0;
 }
-- 
cgit v1.2.3


From d535e4319a2e598ba25dc966ada4e52ea774e33f Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Fri, 4 Sep 2009 15:53:09 +0200
Subject: x86: Make memtype_seq_ops const

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb2806..e2900a36de0 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -826,7 +826,7 @@ static int memtype_seq_show(struct seq_file *seq, void *v)
 	return 0;
 }
 
-static struct seq_operations memtype_seq_ops = {
+static const struct seq_operations memtype_seq_ops = {
 	.start = memtype_seq_start,
 	.next  = memtype_seq_next,
 	.stop  = memtype_seq_stop,
-- 
cgit v1.2.3


From 56ddf7e6d4f69d7ce9f1c484b62e99d6b029e6f8 Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Wed, 2 Sep 2009 22:11:08 +0100
Subject: ARM: 5689/1: Update default config of HP Jornada 700-series machines

This patch updates the default config for HP Jornada 700-series handhelds.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/jornada720_defconfig | 329 ++++++++++++++++++++++------------
 1 file changed, 210 insertions(+), 119 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index f3074e49f2f..df9bfbea861 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 18:56:58 2008
+# Linux kernel version: 2.6.31-rc6
+# Fri Aug 21 15:41:39 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,16 +17,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -44,10 +41,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -56,9 +62,11 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -69,17 +77,22 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -87,30 +100,25 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,7 +134,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -136,14 +144,15 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -152,23 +161,25 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
 
 #
 # SA11x0 Implementations
@@ -188,14 +199,6 @@ CONFIG_SA1100_JORNADA720_SSP=y
 # CONFIG_SA1100_SIMPAD is not set
 CONFIG_SA1100_SSP=y
 
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
 #
 # Processor Type
 #
@@ -215,8 +218,8 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
 CONFIG_FORCE_MAX_ZONEORDER=9
 
 #
@@ -246,30 +249,36 @@ CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -281,9 +290,10 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -294,12 +304,14 @@ CONFIG_CMDLINE=""
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -353,7 +365,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -367,10 +378,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -379,6 +392,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -388,7 +402,10 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -431,14 +448,17 @@ CONFIG_IRCOMM=m
 CONFIG_SA1100_FIR=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -464,29 +484,34 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -513,8 +538,34 @@ CONFIG_DUMMY=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -523,17 +574,27 @@ CONFIG_MII=m
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -565,20 +626,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -587,8 +651,8 @@ CONFIG_TOUCHSCREEN_HP7XX=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -624,11 +688,12 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -649,6 +714,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
@@ -663,12 +732,14 @@ CONFIG_GPIOLIB=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -676,6 +747,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
@@ -687,22 +759,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -712,6 +769,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -733,7 +791,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
 
 #
 # Display device support
@@ -757,6 +825,8 @@ CONFIG_FONT_8x16=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -781,12 +851,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -794,15 +867,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_SA1100=y
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -811,12 +879,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -825,6 +897,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -846,14 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -862,6 +937,7 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -870,6 +946,7 @@ CONFIG_SYSFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -935,12 +1012,16 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -958,19 +1039,20 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -985,13 +1067,16 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1062,15 +1147,21 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1078,7 +1169,7 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From d656f07a7405e788e1275d0238b67f593615f2bb Mon Sep 17 00:00:00 2001
From: sedji gaouaou <sedji.gaouaou@atmel.com>
Date: Thu, 6 Aug 2009 15:20:22 +0100
Subject: ARM: 5640/1: This patch modifies the support of AC97 on the
 at91sam9263 ek board

This patch modifies the support of AC97 on the at91sam9263 ek board, so it would
share the code with AVR32.
Plus it removes a typo in at91sam9263_devices.c.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9263_devices.c | 14 +++++++-------
 arch/arm/mach-at91/board-sam9263ek.c     |  2 +-
 arch/arm/mach-at91/include/mach/board.h  |  6 ++----
 3 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f23324231..55719a97427 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -707,9 +707,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -725,8 +725,8 @@ static struct resource ac97_resources[] = {
 };
 
 static struct platform_device at91sam9263_ac97_device = {
-	.name		= "ac97c",
-	.id		= 1,
+	.name		= "atmel_ac97c",
+	.id		= 0,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
@@ -736,7 +736,7 @@ static struct platform_device at91sam9263_ac97_device = {
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -750,11 +750,11 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 	if (data->reset_pin)
 		at91_set_gpio_output(data->reset_pin, 0);
 
-	ac97_data = *ek_data;
+	ac97_data = *data;
 	platform_device_register(&at91sam9263_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f22..3b669b78e45 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -365,7 +365,7 @@ static void __init ek_add_device_buttons(void) {}
 /*
  * AC97
  */
-static struct atmel_ac97_data ek_ac97_data = {
+static struct ac97c_platform_data ek_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 74801d275cd..13f27a4b882 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <sound/atmel-ac97c.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -174,10 +175,7 @@ struct atmel_lcdfb_info;
 extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
 
  /* AC97 */
-struct atmel_ac97_data {
-	u8		reset_pin;	/* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 
  /* ISI */
 extern void __init at91_add_device_isi(void);
-- 
cgit v1.2.3


From 8c3cbd5a2b2cc244277f6089dae83f09f1e7a27b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 26 Aug 2009 15:33:16 +0100
Subject: ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board

Board code was wrongly setting up the reset pin for AC97 on at91sam9263ek.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3b669b78e45..1bf7bd4cbe1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -364,9 +364,9 @@ static void __init ek_add_device_buttons(void) {}
 
 /*
  * AC97
+ * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= AT91_PIN_PA13,
 };
 
 
-- 
cgit v1.2.3


From 5dbc46506a4f7b9f564bb7589a49ed32bc1caa15 Mon Sep 17 00:00:00 2001
From: Krzysztof Halasa <khc@pm.waw.pl>
Date: Sat, 5 Sep 2009 03:59:49 +0000
Subject: IXP42x HSS support for setting internal clock rate
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

HSS usually uses external clocks, so it's not a big deal. Internal clock
is used for direct DTE-DTE connections and when the DCE doesn't provide
it's own clock.

This also depends on the oscillator frequency. Intel seems to have
calculated the clock register settings for 33.33 MHz (66.66 MHz timer
base). Their settings seem quite suboptimal both in terms of average
frequency (60 ppm is unacceptable for G.703 applications, their primary
intended usage(?)) and jitter.

Many (most?) platforms use a 33.333 MHz oscillator, a 10 ppm difference
from Intel's base.

Instead of creating static tables, I've created a procedure to program
the HSS clock register. The register consists of 3 parts (A, B, C).
The average frequency (= bit rate) is:
66.66x MHz / (A  + (B + 1) / (C + 1))
The procedure aims at the closest average frequency, possibly at the
cost of increased jitter. Nobody would be able to directly drive an
unbufferred transmitter with a HSS anyway, and the frequency error is
what it really counts.

I've verified the above with an oscilloscope on IXP425. It seems IXP46x
and possibly IXP43x use a bit different clock generation algorithm - it
looks like the avg frequency is:
(on IXP465) 66.66x MHz / (A  + B / (C + 1)).
Also they use much greater precomputed A and B - on IXP425 it would
simply result in more jitter, but I don't know how does it work on
IXP46x (perhaps 3 least significant bits aren't used?).

Anyway it looks that they were aiming for exactly +60 ppm or -60 ppm,
while <1 ppm is typically possible (with a synchronized clock, of
course).

The attached patch makes it possible to set almost any bit rate
(my IXP425 533 MHz quits at > 22 Mb/s if a single port is used, and the
minimum is ca. 65 Kb/s).

This is independent of MVIP (multi-E1/T1 on one HSS) mode.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-ixp4xx/common.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 1e93dfee754..5083f03e9b5 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -416,6 +416,7 @@ static struct clocksource clocksource_ixp4xx = {
 };
 
 unsigned long ixp4xx_timer_freq = FREQ;
+EXPORT_SYMBOL(ixp4xx_timer_freq);
 static int __init ixp4xx_clocksource_init(void)
 {
 	clocksource_ixp4xx.mult =
-- 
cgit v1.2.3


From 99f329a2ba3c2d07cc90ca9309babf27ddf98bff Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@ucw.cz>
Date: Sun, 6 Sep 2009 07:28:40 +0200
Subject: [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume

sharpsl_pm.c code tries to read battery state very early during
resume, but those battery meters are connected on SPI and that's only
resumed way later.

Replace the check with simple checking of battery fatal signal, that
actually works at this stage.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/sharpsl_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 2546c066cd6..629e05d1196 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -678,8 +678,8 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab
 		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
 	}
 
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
 		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
 		corgi_goto_sleep(alarm_time, alarm_enable, state);
 		return 1;
-- 
cgit v1.2.3


From a8fae3ec5f118dc92517dcbed3ecf69ddb641d0f Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 7 Sep 2009 18:32:32 +0200
Subject: sched: enable SD_WAKE_IDLE

Now that SD_WAKE_IDLE doesn't make pipe-test suck anymore,
enable it by default for MC, CPU and NUMA domains.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/topology.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index ef7bc7fc252..26d06e052a1 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -152,7 +152,7 @@ extern unsigned long node_remap_size[];
 				| 0*SD_POWERSAVINGS_BALANCE		\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 1*SD_SERIALIZE			\
-				| 0*SD_WAKE_IDLE_FAR			\
+				| 1*SD_WAKE_IDLE_FAR			\
 				| 0*SD_PREFER_SIBLING			\
 				,					\
 	.last_balance		= jiffies,				\
-- 
cgit v1.2.3


From 6e4154d4c2dd3d7e61d19ddd2527322ce34c2f5a Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 8 Sep 2009 16:21:00 +0900
Subject: sh: Use more aggressive dcache purging in kmap teardown.

This fixes up a number of outstanding issues observed with old mappings
on the same colour hanging around. This requires some more optimal
handling, but is a safe fallback until all of the corner cases have been
handled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache.c | 11 ++++++-----
 arch/sh/mm/kmap.c  |  3 +++
 2 files changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index 8e4a8d1ac4a..35c37b7f717 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -97,7 +97,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 	}
 
 	if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-		__flush_wback_region(vto, PAGE_SIZE);
+		__flush_purge_region(vto, PAGE_SIZE);
 
 	kunmap_atomic(vto, KM_USER1);
 	/* Make sure this page is cleared on other CPU's too before using it */
@@ -112,7 +112,7 @@ void clear_user_highpage(struct page *page, unsigned long vaddr)
 	clear_page(kaddr);
 
 	if (pages_do_alias((unsigned long)kaddr, vaddr & PAGE_MASK))
-		__flush_wback_region(kaddr, PAGE_SIZE);
+		__flush_purge_region(kaddr, PAGE_SIZE);
 
 	kunmap_atomic(kaddr, KM_USER0);
 }
@@ -134,7 +134,7 @@ void __update_cache(struct vm_area_struct *vma,
 			unsigned long addr = (unsigned long)page_address(page);
 
 			if (pages_do_alias(addr, address & PAGE_MASK))
-				__flush_wback_region((void *)addr, PAGE_SIZE);
+				__flush_purge_region((void *)addr, PAGE_SIZE);
 		}
 	}
 }
@@ -149,10 +149,11 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 			void *kaddr;
 
 			kaddr = kmap_coherent(page, vmaddr);
-			__flush_wback_region((void *)kaddr, PAGE_SIZE);
+			/* XXX.. For now kunmap_coherent() does a purge */
+			/* __flush_purge_region((void *)kaddr, PAGE_SIZE); */
 			kunmap_coherent(kaddr);
 		} else
-			__flush_wback_region((void *)addr, PAGE_SIZE);
+			__flush_purge_region((void *)addr, PAGE_SIZE);
 	}
 }
 
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index c52cd8c40a6..16e01b5fed0 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -54,6 +54,9 @@ void kunmap_coherent(void *kvaddr)
 		unsigned long vaddr = (unsigned long)kvaddr & PAGE_MASK;
 		enum fixed_addresses idx = __virt_to_fix(vaddr);
 
+		/* XXX.. Kill this later, here for sanity at the moment.. */
+		__flush_purge_region((void *)vaddr, PAGE_SIZE);
+
 		pte_clear(&init_mm, vaddr, kmap_coherent_pte - idx);
 		local_flush_tlb_one(get_asid(), vaddr);
 	}
-- 
cgit v1.2.3


From a2494b9b5fb702becaf8d8e3138f7a1a0d3c537e Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 8 Sep 2009 16:23:08 +0900
Subject: sh: Kill off dcache writeback from copy_page().

Now that the cache purging is handled manually by all copy_page()
callers, we can kill off copy_page()'s on writeback. This optimizes the
non-aliasing case.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/lib/copy_page.S | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S
index 43de7e8e4e1..9d7b8bc5186 100644
--- a/arch/sh/lib/copy_page.S
+++ b/arch/sh/lib/copy_page.S
@@ -30,7 +30,9 @@ ENTRY(copy_page)
 	mov	r4,r10
 	mov	r5,r11
 	mov	r5,r8
-	mov.l	.Lpsz,r0
+	mov	#(PAGE_SIZE >> 10), r0
+	shll8	r0
+	shll2	r0
 	add	r0,r8
 	!
 1:	mov.l	@r11+,r0
@@ -43,7 +45,6 @@ ENTRY(copy_page)
 	mov.l	@r11+,r7
 #if defined(CONFIG_CPU_SH4)
 	movca.l	r0,@r10
-	mov	r10,r0
 #else
 	mov.l	r0,@r10
 #endif
@@ -55,9 +56,6 @@ ENTRY(copy_page)
 	mov.l	r3,@-r10
 	mov.l	r2,@-r10
 	mov.l	r1,@-r10
-#if defined(CONFIG_CPU_SH4)
-	ocbwb	@r0
-#endif
 	cmp/eq	r11,r8
 	bf/s	1b
 	 add	#28,r10
@@ -68,9 +66,6 @@ ENTRY(copy_page)
 	rts
 	 nop
 
-	.balign 4
-.Lpsz:	.long	PAGE_SIZE
-
 /*
  * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
  * Return the number of bytes NOT copied
-- 
cgit v1.2.3


From 54782674084ed9dc829050a8c18298db6847679d Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Tue, 23 Jun 2009 13:54:35 +0200
Subject: [ARM] orion5x: Add LaCie NAS 2Big Network support

This patch add support for the 2Big Network LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig         |   7 +
 arch/arm/mach-orion5x/Makefile        |   1 +
 arch/arm/mach-orion5x/net2big-setup.c | 431 ++++++++++++++++++++++++++++++++++
 3 files changed, 439 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/net2big-setup.c

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 5062b05b76b..c3d513cad5a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -103,6 +103,13 @@ config MACH_BIGDISK
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Big Disk Network NAS.
 
+config MACH_NET2BIG
+	bool "LaCie 2Big Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 1db8a3a2708..89772fcd65c 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
 obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
 obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
+obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 00000000000..7bd6283476f
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE		0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+	.width		= 1,
+	.parts		= net2big_partitions,
+	.nr_parts	= ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= NET2BIG_NOR_BOOT_BASE,
+	.end			= NET2BIG_NOR_BOOT_BASE
+					+ NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &net2big_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+	.n_ports	= 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ	19
+#define NET2BIG_GPIO_SATA0_POWER	23
+#define NET2BIG_GPIO_SATA1_POWER	25
+
+static void __init net2big_sata_power_init(void)
+{
+	int err;
+
+	/* Configure GPIOs over MPP max number. */
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+	err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA0 power GPIO\n");
+		return;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA1 power GPIO\n");
+		goto err_free_1;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA power request GPIO\n");
+		goto err_free_2;
+	}
+
+	if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+		gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+		return;
+	}
+
+	/*
+	 * SATA power up on both disk is done by pulling high the CPLD power
+	 * request line. The 300ms delay is related to the CPLD clock and is
+	 * needed to be sure that the CPLD has take into account the low line
+	 * status.
+	 */
+	msleep(300);
+	gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+	pr_info("net2big: power up SATA hard disks\n");
+
+	return;
+
+err_free_2:
+	gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+	gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+	return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ *                |                |
+ *       0        |       0        |  blink (rate 300ms)
+ *       1        |       0        |  off
+ *       ?        |       1        |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED	6
+#define NET2BIG_GPIO_PWR_BLUE_LED	16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP	7
+
+#define NET2BIG_GPIO_SATA0_RED_LED	11
+#define NET2BIG_GPIO_SATA1_RED_LED	10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED	17
+#define NET2BIG_GPIO_SATA1_BLUE_LED	13
+
+static struct gpio_led net2big_leds[] = {
+	{
+		.name = "net2big:red:power",
+		.gpio = NET2BIG_GPIO_PWR_RED_LED,
+	},
+	{
+		.name = "net2big:blue:power",
+		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+	},
+	{
+		.name = "net2big:red:sata0",
+		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
+	},
+	{
+		.name = "net2big:red:sata1",
+		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+	.num_leds = ARRAY_SIZE(net2big_leds),
+	.leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &net2big_led_data,
+	},
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+	int err;
+
+	/* Stop initial CPLD slow red/blue blinking on power LED. */
+	err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+			   "Power LED blink stop");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+	}
+	if (err)
+		pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+	/*
+	 * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+	 * hard disk activity.
+	 */
+	err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+			   "SATA0 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+			   "SATA1 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+	platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON	18
+#define NET2BIG_GPIO_POWER_SWITCH_ON	8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF	9
+
+#define NET2BIG_SWITCH_POWER_ON		0x1
+#define NET2BIG_SWITCH_POWER_OFF	0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_OFF,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_ON,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= NET2BIG_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+	.buttons	= net2big_buttons,
+	.nbuttons	= ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Raid mode (bit 0) */
+	{  1, MPP_GPIO },	/* USB port 2 fuse (0 = Fail, 1 = Ok) */
+	{  2, MPP_GPIO },	/* Raid mode (bit 1) */
+	{  3, MPP_GPIO },	/* Board ID (bit 0) */
+	{  4, MPP_GPIO },	/* Fan activity (0 = Off, 1 = On) */
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED (0 = Off, 1 = On) */
+	{  7, MPP_GPIO },	/* Disable initial blinking on front LED */
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_GPIO },	/* SATA 1 red LED (0 = Off, 1 = On) */
+	{ 11, MPP_GPIO },	/* SATA 0 red LED (0 = Off, 1 = On) */
+	{ 12, MPP_GPIO },	/* Board ID (bit 1) */
+	{ 13, MPP_GPIO },	/* SATA 1 blue LED blink control */
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_GPIO },	/* Blue front LED control */
+	{ 17, MPP_GPIO },	/* SATA 0 blue LED blink control */
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_GPIO },	/* SATA{0,1} power On/Off request */
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: SATA 0 power status */
+	/* 24: Board power off */
+	/* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF		24
+
+static void net2big_power_off(void)
+{
+	gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(net2big_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&net2big_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	net2big_sata_power_init();
+	orion5x_sata_init(&net2big_sata_data);
+
+	orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
+				   NET2BIG_NOR_BOOT_SIZE);
+	platform_device_register(&net2big_nor_flash);
+
+	platform_device_register(&net2big_gpio_buttons);
+	net2big_gpio_leds_init();
+
+	i2c_register_board_info(0, net2big_i2c_devices,
+				ARRAY_SIZE(net2big_i2c_devices));
+
+	orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = net2big_power_off;
+	else
+		pr_err("net2big: failed to configure power-off GPIO\n");
+
+	pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= net2big_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+
-- 
cgit v1.2.3


From 9308add6ea4fedeba37b0d7c4630a542bd34f214 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 8 Sep 2009 17:42:52 -0700
Subject: dmaengine: cleanup unused transaction types

No drivers currently implement these operation types, so they can be
deleted.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/mach-iop13xx/setup.c | 7 -------
 arch/arm/plat-iop/adma.c      | 2 --
 2 files changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index faaef95342b..5c147fb66a0 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -477,10 +477,8 @@ void __init iop13xx_platform_init(void)
 			plat_data = &iop13xx_adma_0_data;
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			break;
 		case IOP13XX_INIT_ADMA_1:
@@ -489,10 +487,8 @@ void __init iop13xx_platform_init(void)
 			plat_data = &iop13xx_adma_1_data;
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			break;
 		case IOP13XX_INIT_ADMA_2:
@@ -501,13 +497,10 @@ void __init iop13xx_platform_init(void)
 			plat_data = &iop13xx_adma_2_data;
 			dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR, plat_data->cap_mask);
-			dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
 			dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
 			dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
-			dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
 			dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ, plat_data->cap_mask);
-			dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
 			dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
 			break;
 		}
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index da1dd0dab07..1ff6a37e893 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -179,7 +179,6 @@ static int __init iop3xx_adma_cap_init(void)
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
 	#else
 	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
-	dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_0_data.cap_mask);
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
 	#endif
 
@@ -188,7 +187,6 @@ static int __init iop3xx_adma_cap_init(void)
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
 	#else
 	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
-	dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_1_data.cap_mask);
 	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
 	#endif
 
-- 
cgit v1.2.3


From 308136d1abcb2d759bac40ed4f5d42ac4af59d8b Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Tue, 8 Sep 2009 17:53:02 -0700
Subject: iop-adma: implement a private tx_list

Drop iop-adma's use of tx_list from struct dma_async_tx_descriptor in
preparation for removal of this field.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/arm/include/asm/hardware/iop_adma.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
index 385c6e8cbbd..95dc133d0a7 100644
--- a/arch/arm/include/asm/hardware/iop_adma.h
+++ b/arch/arm/include/asm/hardware/iop_adma.h
@@ -86,6 +86,7 @@ struct iop_adma_chan {
  * @idx: pool index
  * @unmap_src_cnt: number of xor sources
  * @unmap_len: transaction bytecount
+ * @tx_list: list of descriptors that are associated with one operation
  * @async_tx: support for the async_tx api
  * @group_list: list of slots that make up a multi-descriptor transaction
  *	for example transfer lengths larger than the supported hw max
@@ -102,6 +103,7 @@ struct iop_adma_desc_slot {
 	u16 idx;
 	u16 unmap_src_cnt;
 	size_t unmap_len;
+	struct list_head tx_list;
 	struct dma_async_tx_descriptor async_tx;
 	union {
 		u32 *xor_check_result;
-- 
cgit v1.2.3


From bbea0b6e0d214ef1511b9c6ccf3af26b38f0af7d Mon Sep 17 00:00:00 2001
From: Ira Snyder <iws@ovro.caltech.edu>
Date: Tue, 8 Sep 2009 17:53:04 -0700
Subject: fsldma: Add DMA_SLAVE support

Use the DMA_SLAVE capability of the DMAEngine API to copy/from a
scatterlist into an arbitrary list of hardware address/length pairs.

This allows a single DMA transaction to copy data from several different
devices into a scatterlist at the same time.

This also adds support to enable some controller-specific features such as
external start and external pause for a DMA transaction.

[dan.j.williams@intel.com: rebased on tx_list movement]
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Acked-by: Li Yang <leoli@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/powerpc/include/asm/fsldma.h | 136 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 136 insertions(+)
 create mode 100644 arch/powerpc/include/asm/fsldma.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/fsldma.h b/arch/powerpc/include/asm/fsldma.h
new file mode 100644
index 00000000000..a67aeed17d4
--- /dev/null
+++ b/arch/powerpc/include/asm/fsldma.h
@@ -0,0 +1,136 @@
+/*
+ * Freescale MPC83XX / MPC85XX DMA Controller
+ *
+ * Copyright (c) 2009 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ARCH_POWERPC_ASM_FSLDMA_H__
+#define __ARCH_POWERPC_ASM_FSLDMA_H__
+
+#include <linux/dmaengine.h>
+
+/*
+ * Definitions for the Freescale DMA controller's DMA_SLAVE implemention
+ *
+ * The Freescale DMA_SLAVE implementation was designed to handle many-to-many
+ * transfers. An example usage would be an accelerated copy between two
+ * scatterlists. Another example use would be an accelerated copy from
+ * multiple non-contiguous device buffers into a single scatterlist.
+ *
+ * A DMA_SLAVE transaction is defined by a struct fsl_dma_slave. This
+ * structure contains a list of hardware addresses that should be copied
+ * to/from the scatterlist passed into device_prep_slave_sg(). The structure
+ * also has some fields to enable hardware-specific features.
+ */
+
+/**
+ * struct fsl_dma_hw_addr
+ * @entry: linked list entry
+ * @address: the hardware address
+ * @length: length to transfer
+ *
+ * Holds a single physical hardware address / length pair for use
+ * with the DMAEngine DMA_SLAVE API.
+ */
+struct fsl_dma_hw_addr {
+	struct list_head entry;
+
+	dma_addr_t address;
+	size_t length;
+};
+
+/**
+ * struct fsl_dma_slave
+ * @addresses: a linked list of struct fsl_dma_hw_addr structures
+ * @request_count: value for DMA request count
+ * @src_loop_size: setup and enable constant source-address DMA transfers
+ * @dst_loop_size: setup and enable constant destination address DMA transfers
+ * @external_start: enable externally started DMA transfers
+ * @external_pause: enable externally paused DMA transfers
+ *
+ * Holds a list of address / length pairs for use with the DMAEngine
+ * DMA_SLAVE API implementation for the Freescale DMA controller.
+ */
+struct fsl_dma_slave {
+
+	/* List of hardware address/length pairs */
+	struct list_head addresses;
+
+	/* Support for extra controller features */
+	unsigned int request_count;
+	unsigned int src_loop_size;
+	unsigned int dst_loop_size;
+	bool external_start;
+	bool external_pause;
+};
+
+/**
+ * fsl_dma_slave_append - add an address/length pair to a struct fsl_dma_slave
+ * @slave: the &struct fsl_dma_slave to add to
+ * @address: the hardware address to add
+ * @length: the length of bytes to transfer from @address
+ *
+ * Add a hardware address/length pair to a struct fsl_dma_slave. Returns 0 on
+ * success, -ERRNO otherwise.
+ */
+static inline int fsl_dma_slave_append(struct fsl_dma_slave *slave,
+				       dma_addr_t address, size_t length)
+{
+	struct fsl_dma_hw_addr *addr;
+
+	addr = kzalloc(sizeof(*addr), GFP_ATOMIC);
+	if (!addr)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&addr->entry);
+	addr->address = address;
+	addr->length = length;
+
+	list_add_tail(&addr->entry, &slave->addresses);
+	return 0;
+}
+
+/**
+ * fsl_dma_slave_free - free a struct fsl_dma_slave
+ * @slave: the struct fsl_dma_slave to free
+ *
+ * Free a struct fsl_dma_slave and all associated address/length pairs
+ */
+static inline void fsl_dma_slave_free(struct fsl_dma_slave *slave)
+{
+	struct fsl_dma_hw_addr *addr, *tmp;
+
+	if (slave) {
+		list_for_each_entry_safe(addr, tmp, &slave->addresses, entry) {
+			list_del(&addr->entry);
+			kfree(addr);
+		}
+
+		kfree(slave);
+	}
+}
+
+/**
+ * fsl_dma_slave_alloc - allocate a struct fsl_dma_slave
+ * @gfp: the flags to pass to kmalloc when allocating this structure
+ *
+ * Allocate a struct fsl_dma_slave for use by the DMA_SLAVE API. Returns a new
+ * struct fsl_dma_slave on success, or NULL on failure.
+ */
+static inline struct fsl_dma_slave *fsl_dma_slave_alloc(gfp_t gfp)
+{
+	struct fsl_dma_slave *slave;
+
+	slave = kzalloc(sizeof(*slave), gfp);
+	if (!slave)
+		return NULL;
+
+	INIT_LIST_HEAD(&slave->addresses);
+	return slave;
+}
+
+#endif /* __ARCH_POWERPC_ASM_FSLDMA_H__ */
-- 
cgit v1.2.3


From d8902adcc1a9fd484c8cb5e575152e32192c1ff8 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Mon, 7 Sep 2009 03:26:23 +0000
Subject: dmaengine: sh: Add Support SuperH DMA Engine driver

This supported all DMA channels, and it was tested in SH7722,
SH7780, SH7785 and SH7763.
This can not use with SH DMA API.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 arch/sh/drivers/dma/Kconfig  | 12 +++++++++---
 arch/sh/drivers/dma/Makefile |  3 +--
 arch/sh/include/asm/dma-sh.h | 13 +++++++++++++
 3 files changed, 23 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig
index 63e9dd30b41..f935a7e5cbe 100644
--- a/arch/sh/drivers/dma/Kconfig
+++ b/arch/sh/drivers/dma/Kconfig
@@ -1,12 +1,9 @@
 menu "DMA support"
 
-config SH_DMA_API
-	bool
 
 config SH_DMA
 	bool "SuperH on-chip DMA controller (DMAC) support"
 	depends on CPU_SH3 || CPU_SH4
-	select SH_DMA_API
 	default n
 
 config SH_DMA_IRQ_MULTI
@@ -19,6 +16,15 @@ config SH_DMA_IRQ_MULTI
 		     CPU_SUBTYPE_SH7780  || CPU_SUBTYPE_SH7785  || \
 		     CPU_SUBTYPE_SH7760
 
+config SH_DMA_API
+	depends on SH_DMA
+	bool "SuperH DMA API support"
+	default n
+	help
+	  SH_DMA_API always enabled DMA API of used SuperH.
+	  If you want to use DMA ENGINE, you must not enable this.
+	  Please enable DMA_ENGINE and SH_DMAE.
+
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile
index c6068137b46..d88c9484762 100644
--- a/arch/sh/drivers/dma/Makefile
+++ b/arch/sh/drivers/dma/Makefile
@@ -2,8 +2,7 @@
 # Makefile for the SuperH DMA specific kernel interface routines under Linux.
 #
 
-obj-$(CONFIG_SH_DMA_API)	+= dma-api.o dma-sysfs.o
-obj-$(CONFIG_SH_DMA)		+= dma-sh.o
+obj-$(CONFIG_SH_DMA_API)	+= dma-sh.o dma-api.o dma-sysfs.o
 obj-$(CONFIG_PVR2_DMA)		+= dma-pvr2.o
 obj-$(CONFIG_G2_DMA)		+= dma-g2.o
 obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o
diff --git a/arch/sh/include/asm/dma-sh.h b/arch/sh/include/asm/dma-sh.h
index 0c8f8e14622..89bdac558db 100644
--- a/arch/sh/include/asm/dma-sh.h
+++ b/arch/sh/include/asm/dma-sh.h
@@ -115,4 +115,17 @@ static u32 dma_base_addr[] __maybe_unused = {
 #define CHCR    0x0C
 #define DMAOR	0x40
 
+/*
+ * for dma engine
+ *
+ * SuperH DMA mode
+ */
+#define SHDMA_MIX_IRQ	(1 << 1)
+#define SHDMA_DMAOR1	(1 << 2)
+#define SHDMA_DMAE1		(1 << 3)
+
+struct sh_dmae_pdata {
+	unsigned int mode;
+};
+
 #endif /* __DMA_SH_H */
-- 
cgit v1.2.3


From 3e5cd1f2576c720f1d0705fdd7ba64f27e8836b7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Sun, 16 Aug 2009 21:02:36 +0900
Subject: dmi: extend dmi_get_year() to dmi_get_date()

There are cases where full date information is required instead of
just the year.  Add month and day parsing to dmi_get_year() and rename
it to dmi_get_date().

As the original function only required '/' followed by any number of
parseable characters at the end of the string, keep that behavior to
avoid upsetting existing users.

The new function takes dates of format [mm[/dd]]/yy[yy].  Year, month
and date are checked to be in the ranges of [1-9999], [1-12] and
[1-31] respectively and any invalid or out-of-range component is
returned as zero.

The dummy implementation is updated accordingly but the return value
is updated to indicate field not found which is consistent with how
other dummy functions behave.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 arch/x86/pci/direct.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index bd13c3e4c6d..347d882b3bb 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -192,13 +192,14 @@ struct pci_raw_ops pci_direct_conf2 = {
 static int __init pci_sanity_check(struct pci_raw_ops *o)
 {
 	u32 x = 0;
-	int devfn;
+	int year, devfn;
 
 	if (pci_probe & PCI_NO_CHECKS)
 		return 1;
 	/* Assume Type 1 works for newer systems.
 	   This handles machines that don't have anything on PCI Bus 0. */
-	if (dmi_get_year(DMI_BIOS_DATE) >= 2001)
+	dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL);
+	if (year >= 2001)
 		return 1;
 
 	for (devfn = 0; devfn < 0x100; devfn++) {
-- 
cgit v1.2.3


From 682f88ab74e55dae55ea3bf30b46f56f71b793bd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 9 Sep 2009 13:19:46 +0900
Subject: sh: Cleanup whitespace damage in sh4_flush_icache_range().

There was quite a lot of tab->space damage done here from a former patch,
clean it up once and for all.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh4.c | 63 ++++++++++++++++++++++++++------------------------
 1 file changed, 33 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 3ac4945cb49..b2453bbef4c 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -46,7 +46,6 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
 static void sh4_flush_icache_range(void *args)
 {
 	struct flusher_data *data = args;
-	int icacheaddr;
 	unsigned long start, end;
 	unsigned long flags, v;
 	int i;
@@ -54,36 +53,40 @@ static void sh4_flush_icache_range(void *args)
 	start = data->addr1;
 	end = data->addr2;
 
-       /* If there are too many pages then just blow the caches */
-        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
-                local_flush_cache_all(args);
-       } else {
-               /* selectively flush d-cache then invalidate the i-cache */
-               /* this is inefficient, so only use for small ranges */
-               start &= ~(L1_CACHE_BYTES-1);
-               end += L1_CACHE_BYTES-1;
-               end &= ~(L1_CACHE_BYTES-1);
-
-               local_irq_save(flags);
-               jump_to_uncached();
-
-               for (v = start; v < end; v+=L1_CACHE_BYTES) {
-                       asm volatile("ocbwb     %0"
-                                    : /* no output */
-                                    : "m" (__m(v)));
-
-                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
-                                       v & cpu_data->icache.entry_mask);
-
-                       for (i = 0; i < cpu_data->icache.ways;
-                               i++, icacheaddr += cpu_data->icache.way_incr)
-                                       /* Clear i-cache line valid-bit */
-                                       ctrl_outl(0, icacheaddr);
-               }
-
-		back_to_cached();
-		local_irq_restore(flags);
+	/* If there are too many pages then just blow away the caches */
+	if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+		local_flush_cache_all(NULL);
+		return;
+	}
+
+	/*
+	 * Selectively flush d-cache then invalidate the i-cache.
+	 * This is inefficient, so only use this for small ranges.
+	 */
+	start &= ~(L1_CACHE_BYTES-1);
+	end += L1_CACHE_BYTES-1;
+	end &= ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = start; v < end; v += L1_CACHE_BYTES) {
+		unsigned long icacheaddr;
+
+		__ocbwb(v);
+
+		icacheaddr = CACHE_IC_ADDRESS_ARRAY | (v &
+				cpu_data->icache.entry_mask);
+
+		/* Clear i-cache line valid-bit */
+		for (i = 0; i < cpu_data->icache.ways; i++) {
+			__raw_writel(0, icacheaddr);
+			icacheaddr += cpu_data->icache.way_incr;
+		}
 	}
+
+	back_to_cached();
+	local_irq_restore(flags);
 }
 
 static inline void flush_cache_4096(unsigned long start,
-- 
cgit v1.2.3


From a8f22264550e64c0cd11fb6647284b0bd6407f9c Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 8 Sep 2009 23:16:06 -0700
Subject: sparc64: Manage NMI watchdog enabling like x86.

Use a per-cpu 'wd_enabled' boolean and a global atomic_t count
of watchdog NMI enabled cpus which is set to '-1' if something
is wrong with the watchdog and it can't be used.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/nmi.h |  2 +-
 arch/sparc/kernel/nmi.c      | 60 +++++++++++++++++++++++++++++++-------------
 arch/sparc/oprofile/init.c   |  2 +-
 3 files changed, 45 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index fbd546dd4fe..c7d11e435df 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -5,6 +5,6 @@ extern int __init nmi_init(void);
 extern void perfctr_irq(int irq, struct pt_regs *regs);
 extern void nmi_adjust_hz(unsigned int new_hz);
 
-extern int nmi_usable;
+extern atomic_t nmi_active;
 
 #endif /* __NMI_H */
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 2c0cc72d295..d1614e8384a 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -34,10 +34,17 @@
 static int nmi_watchdog_active;
 static int panic_on_timeout;
 
-int nmi_usable;
-EXPORT_SYMBOL_GPL(nmi_usable);
+/* nmi_active:
+ * >0: the NMI watchdog is active, but can be disabled
+ * <0: the NMI watchdog has not been set up, and cannot be enabled
+ *  0: the NMI watchdog is disabled, but can be enabled
+ */
+atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
+EXPORT_SYMBOL(nmi_active);
 
 static unsigned int nmi_hz = HZ;
+static DEFINE_PER_CPU(short, wd_enabled);
+static int endflag __initdata;
 
 static DEFINE_PER_CPU(unsigned int, last_irq_sum);
 static DEFINE_PER_CPU(local_t, alert_counter);
@@ -110,7 +117,7 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 		__get_cpu_var(last_irq_sum) = sum;
 		local_set(&__get_cpu_var(alert_counter), 0);
 	}
-	if (nmi_usable) {
+	if (__get_cpu_var(wd_enabled)) {
 		write_pic(picl_value(nmi_hz));
 		pcr_ops->write(pcr_enable);
 	}
@@ -121,8 +128,6 @@ static inline unsigned int get_nmi_count(int cpu)
 	return cpu_data(cpu).__nmi_count;
 }
 
-static int endflag __initdata;
-
 static __init void nmi_cpu_busy(void *data)
 {
 	local_irq_enable_in_hardirq();
@@ -143,12 +148,15 @@ static void report_broken_nmi(int cpu, int *prev_nmi_count)
 	printk(KERN_WARNING
 		"and attach the output of the 'dmesg' command.\n");
 
-	nmi_usable = 0;
+	per_cpu(wd_enabled, cpu) = 0;
+	atomic_dec(&nmi_active);
 }
 
-static void stop_watchdog(void *unused)
+static void stop_nmi_watchdog(void *unused)
 {
 	pcr_ops->write(PCR_PIC_PRIV);
+	__get_cpu_var(wd_enabled) = 0;
+	atomic_dec(&nmi_active);
 }
 
 static int __init check_nmi_watchdog(void)
@@ -156,6 +164,9 @@ static int __init check_nmi_watchdog(void)
 	unsigned int *prev_nmi_count;
 	int cpu, err;
 
+	if (!atomic_read(&nmi_active))
+		return 0;
+
 	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL);
 	if (!prev_nmi_count) {
 		err = -ENOMEM;
@@ -172,12 +183,15 @@ static int __init check_nmi_watchdog(void)
 	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
 
 	for_each_online_cpu(cpu) {
+		if (!per_cpu(wd_enabled, cpu))
+			continue;
 		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
 			report_broken_nmi(cpu, prev_nmi_count);
 	}
 	endflag = 1;
-	if (!nmi_usable) {
+	if (!atomic_read(&nmi_active)) {
 		kfree(prev_nmi_count);
+		atomic_set(&nmi_active, -1);
 		err = -ENODEV;
 		goto error;
 	}
@@ -188,12 +202,26 @@ static int __init check_nmi_watchdog(void)
 	kfree(prev_nmi_count);
 	return 0;
 error:
-	on_each_cpu(stop_watchdog, NULL, 1);
+	on_each_cpu(stop_nmi_watchdog, NULL, 1);
 	return err;
 }
 
-static void start_watchdog(void *unused)
+static void start_nmi_watchdog(void *unused)
+{
+	__get_cpu_var(wd_enabled) = 1;
+	atomic_inc(&nmi_active);
+
+	pcr_ops->write(PCR_PIC_PRIV);
+	write_pic(picl_value(nmi_hz));
+
+	pcr_ops->write(pcr_enable);
+}
+
+static void nmi_adjust_hz_one(void *unused)
 {
+	if (!__get_cpu_var(wd_enabled))
+		return;
+
 	pcr_ops->write(PCR_PIC_PRIV);
 	write_pic(picl_value(nmi_hz));
 
@@ -203,13 +231,13 @@ static void start_watchdog(void *unused)
 void nmi_adjust_hz(unsigned int new_hz)
 {
 	nmi_hz = new_hz;
-	on_each_cpu(start_watchdog, NULL, 1);
+	on_each_cpu(nmi_adjust_hz_one, NULL, 1);
 }
 EXPORT_SYMBOL_GPL(nmi_adjust_hz);
 
 static int nmi_shutdown(struct notifier_block *nb, unsigned long cmd, void *p)
 {
-	on_each_cpu(stop_watchdog, NULL, 1);
+	on_each_cpu(stop_nmi_watchdog, NULL, 1);
 	return 0;
 }
 
@@ -221,16 +249,14 @@ int __init nmi_init(void)
 {
 	int err;
 
-	nmi_usable = 1;
-
-	on_each_cpu(start_watchdog, NULL, 1);
+	on_each_cpu(start_nmi_watchdog, NULL, 1);
 
 	err = check_nmi_watchdog();
 	if (!err) {
 		err = register_reboot_notifier(&nmi_reboot_notifier);
 		if (err) {
-			nmi_usable = 0;
-			on_each_cpu(stop_watchdog, NULL, 1);
+			on_each_cpu(stop_nmi_watchdog, NULL, 1);
+			atomic_set(&nmi_active, -1);
 		}
 	}
 	return err;
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index d172f86439b..9ce34fd294c 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -57,7 +57,7 @@ static void timer_stop(void)
 
 static int op_nmi_timer_init(struct oprofile_operations *ops)
 {
-	if (!nmi_usable)
+	if (atomic_read(&nmi_active) <= 0)
 		return -ENODEV;
 
 	ops->start = timer_start;
-- 
cgit v1.2.3


From 4e85f5915dedb7c852c1e1189aa4133c87798a5e Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 8 Sep 2009 23:20:39 -0700
Subject: sparc64: Kill unnecessary cast in profile_timer_exceptions_notify().

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/oprofile/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index 9ce34fd294c..f97cb8b6ee5 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -21,7 +21,7 @@
 static int profile_timer_exceptions_notify(struct notifier_block *self,
 					   unsigned long val, void *data)
 {
-	struct die_args *args = (struct die_args *)data;
+	struct die_args *args = data;
 	int ret = NOTIFY_DONE;
 
 	switch (val) {
-- 
cgit v1.2.3


From d89be56b2153ccad7e8cd9e71b5d8b686632e8c2 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 8 Sep 2009 23:29:16 -0700
Subject: sparc64: Make touch_nmi_watchdog() actually work.

It guards it's actions on nmi_watchdog_active, but nothing ever
sets that and it's initial value is zero.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/nmi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index d1614e8384a..47a465fe3c3 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -31,7 +31,6 @@
  * level 14 as our IRQ off level.
  */
 
-static int nmi_watchdog_active;
 static int panic_on_timeout;
 
 /* nmi_active:
@@ -52,7 +51,7 @@ static DEFINE_PER_CPU(int, nmi_touch);
 
 void touch_nmi_watchdog(void)
 {
-	if (nmi_watchdog_active) {
+	if (atomic_read(&nmi_active)) {
 		int cpu;
 
 		for_each_present_cpu(cpu) {
-- 
cgit v1.2.3


From 733e5e4b4eb1bc1e27acbe092200154051171426 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 9 Sep 2009 08:30:21 +0100
Subject: KEYS: Add missing linux/tracehook.h #inclusions

Add #inclusions of linux/tracehook.h to those arch files that had the tracehook
call for TIF_NOTIFY_RESUME added when support for that flag was added to that
arch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/alpha/kernel/signal.c  | 1 +
 arch/arm/kernel/signal.c    | 1 +
 arch/avr32/kernel/signal.c  | 1 +
 arch/cris/kernel/ptrace.c   | 1 +
 arch/h8300/kernel/signal.c  | 1 +
 arch/m32r/kernel/signal.c   | 1 +
 arch/mips/kernel/signal.c   | 1 +
 arch/parisc/kernel/signal.c | 1 +
 8 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index d91aaa74705..0932dbb1ef8 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -20,6 +20,7 @@
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
 #include <linux/syscalls.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/sigcontext.h>
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ea4ad3a43c8..b76fe06d92e 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -12,6 +12,7 @@
 #include <linux/personality.h>
 #include <linux/freezer.h>
 #include <linux/uaccess.h>
+#include <linux/tracehook.h>
 
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index de9f7fe2aef..64f886fac2e 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -16,6 +16,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ucontext.h>
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index 32e9d5ee895..48b0f391263 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index abac3ee8c52..af842c369d2 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -39,6 +39,7 @@
 #include <linux/tty.h>
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index f80bac17c65..144b0f124fc 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -21,6 +21,7 @@
 #include <linux/stddef.h>
 #include <linux/personality.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index c2acf31874a..6254041b942 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -21,6 +21,7 @@
 #include <linux/compiler.h>
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
+#include <linux/tracehook.h>
 
 #include <asm/abi.h>
 #include <asm/asm.h>
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 5ca1c02b805..8eb3c63c407 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -25,6 +25,7 @@
 #include <linux/stddef.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/rt_sigframe.h>
 #include <asm/uaccess.h>
-- 
cgit v1.2.3


From a7db50405216610c8a0d62b8b400180b6f366733 Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Mon, 22 Jun 2009 08:08:07 -0600
Subject: PCI: remove pcibios_scan_all_fns()

This was #define'd as 0 on all platforms, so let's get rid of it.

This change makes pci_scan_slot() slightly easier to read.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/alpha/include/asm/pci.h    |  1 -
 arch/arm/include/asm/pci.h      |  2 --
 arch/h8300/include/asm/pci.h    |  1 -
 arch/ia64/include/asm/pci.h     | 14 ++++++++++++--
 arch/mips/include/asm/pci.h     |  2 --
 arch/mn10300/include/asm/pci.h  | 13 ++++++++++++-
 arch/parisc/include/asm/pci.h   |  1 -
 arch/powerpc/include/asm/pci.h  |  1 -
 arch/sh/include/asm/pci.h       |  1 -
 arch/sparc/include/asm/pci_32.h |  1 -
 arch/sparc/include/asm/pci_64.h |  1 -
 arch/um/include/asm/pci.h       |  1 -
 arch/x86/include/asm/pci.h      |  1 -
 13 files changed, 24 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index d22ace99d13..dd8dcabf160 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -52,7 +52,6 @@ struct pci_controller {
    bus numbers.  */
 
 #define pcibios_assign_all_busses()	1
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		alpha_mv.min_io_address
 #define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 0abf386ba3d..226cddd2fb6 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -6,8 +6,6 @@
 
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
-#define pcibios_scan_all_fns(a, b)	0
-
 #ifdef CONFIG_PCI_HOST_ITE8152
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PIC bus mater devices
diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
index 97389b35aa3..cc9762091c0 100644
--- a/arch/h8300/include/asm/pci.h
+++ b/arch/h8300/include/asm/pci.h
@@ -8,7 +8,6 @@
  */
 
 #define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
 
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index fcfca56bb85..55281aabe5f 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -17,7 +17,6 @@
  * loader.
  */
 #define pcibios_assign_all_busses()     0
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
@@ -135,7 +134,18 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev,
 extern void pcibios_bus_to_resource(struct pci_dev *dev,
 		struct resource *res, struct pci_bus_region *region);
 
-#define pcibios_scan_all_fns(a, b)	0
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
 
 #define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index a68d111e55e..5ebf82572ec 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -65,8 +65,6 @@ extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 
 extern unsigned int pcibios_assign_all_busses(void);
 
-#define pcibios_scan_all_fns(a, b)	0
-
 extern unsigned long PCIBIOS_MIN_IO;
 extern unsigned long PCIBIOS_MIN_MEM;
 
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index 19aecc90f7a..6095a28561d 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -101,7 +101,18 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev,
 				    struct resource *res,
 				    struct pci_bus_region *region);
 
-#define pcibios_scan_all_fns(a, b)	0
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
 
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index 7d842d699df..64c7aa590ae 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -233,7 +233,6 @@ static inline void pcibios_register_hba(struct pci_hba_data *x)
  *   rp7420/8420 boxes and then revisit this issue.
  */
 #define pcibios_assign_all_busses()     (1)
-#define pcibios_scan_all_fns(a, b)	(0)
 
 #define PCIBIOS_MIN_IO          0x10
 #define PCIBIOS_MIN_MEM         0x1000 /* NBPG - but pci/setup-res.c dies */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index d9483c504d2..36057c821ff 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -40,7 +40,6 @@ struct pci_dev;
  */
 #define pcibios_assign_all_busses() \
 	(ppc_pci_has_flag(PPC_PCI_REASSIGN_ALL_BUS))
-#define pcibios_scan_all_fns(a, b)	0
 
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index d3633f513eb..4163950cd1c 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -10,7 +10,6 @@
    or architectures with incomplete PCI setup by the loader */
 
 #define pcibios_assign_all_busses()	1
-#define pcibios_scan_all_fns(a, b)	0
 
 /*
  * A board can define one or more PCI channels that represent built-in (or
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index b41c4c19815..810d9248e23 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -10,7 +10,6 @@
  * or architectures with incomplete PCI setup by the loader.
  */
 #define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		0UL
 #define PCIBIOS_MIN_MEM		0UL
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 7a1e3566e59..a3297088828 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -10,7 +10,6 @@
  * or architectures with incomplete PCI setup by the loader.
  */
 #define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		0UL
 #define PCIBIOS_MIN_MEM		0UL
diff --git a/arch/um/include/asm/pci.h b/arch/um/include/asm/pci.h
index 59923199cdc..b44cf59ede1 100644
--- a/arch/um/include/asm/pci.h
+++ b/arch/um/include/asm/pci.h
@@ -2,6 +2,5 @@
 #define __UM_PCI_H
 
 #define PCI_DMA_BUS_IS_PHYS     (1)
-#define pcibios_scan_all_fns(a, b)	0
 
 #endif
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 1ff685ca221..f76a162c082 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -48,7 +48,6 @@ extern unsigned int pcibios_assign_all_busses(void);
 #else
 #define pcibios_assign_all_busses()	0
 #endif
-#define pcibios_scan_all_fns(a, b)	0
 
 extern unsigned long pci_mem_start;
 #define PCIBIOS_MIN_IO		0x1000
-- 
cgit v1.2.3


From eae91c0215d99f7727b66e2928fb73bf86bc9668 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <willy@linux.intel.com>
Date: Fri, 19 Jun 2009 09:36:13 -0400
Subject: frv/PCI: Use pci_claim_resource

Instead of open-coding pci_find_parent_resource and request_resource,
just call pci_claim_resource.

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/frv/mb93090-mb00/pci-frv.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 43d67534c71..566bdeb499d 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -86,7 +86,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 	struct pci_bus *bus;
 	struct pci_dev *dev;
 	int idx;
-	struct resource *r, *pr;
+	struct resource *r;
 
 	/* Depth-First Search on bus tree */
 	for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
@@ -96,8 +96,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				r = &dev->resource[idx];
 				if (!r->start)
 					continue;
-				pr = pci_find_parent_resource(dev, r);
-				if (!pr || request_resource(pr, r) < 0)
+				if (pci_claim_resource(dev, idx) < 0)
 					printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
 			}
 		}
@@ -110,7 +109,7 @@ static void __init pcibios_allocate_resources(int pass)
 	struct pci_dev *dev = NULL;
 	int idx, disabled;
 	u16 command;
-	struct resource *r, *pr;
+	struct resource *r;
 
 	for_each_pci_dev(dev) {
 		pci_read_config_word(dev, PCI_COMMAND, &command);
@@ -127,8 +126,7 @@ static void __init pcibios_allocate_resources(int pass)
 			if (pass == disabled) {
 				DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
 				    r->start, r->end, r->flags, disabled, pass);
-				pr = pci_find_parent_resource(dev, r);
-				if (!pr || request_resource(pr, r) < 0) {
+				if (pci_claim_resource(dev, idx) < 0) {
 					printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
 					/* We'll assign a new address later */
 					r->end -= r->start;
-- 
cgit v1.2.3


From 2547089ca2db132e307ef68848ba029a8ec2f341 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri, 10 Jul 2009 14:04:30 -0700
Subject: x86/PCI: initialize PCI bus node numbers early

The current mp_bus_to_node array is initialized only by AMD specific
code, since AMD platforms have registers that can be used for
determining mode numbers.  On new Intel platforms it's necessary to
initialize this array as well though, otherwise all PCI node numbers
will be 0, when in fact they should be -1 (indicating that I/O isn't
tied to any particular node).

So move the mp_bus_to_node code into the common PCI code, and
initialize it early with a default value of -1.  This may be overridden
later by arch code (e.g. the AMD code).

With this change, PCI consistent memory and other node specific
allocations (e.g. skbuff allocs) should occur on the "current" node.
If, for performance reasons, applications want to be bound to specific
nodes, they should open their devices only after being pinned to the
CPU where they'll run, for maximum locality.

Acked-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/amd_bus.c | 64 +---------------------------------------------
 arch/x86/pci/common.c  | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 70 insertions(+), 63 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 3ffa10df20b..572ee9782f2 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -15,63 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_NUMA
-
-#define BUS_NR 256
-
-#ifdef CONFIG_X86_64
-
-static int mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-		mp_bus_to_node[busnum] = node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node = -1;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return node;
-
-	node = mp_bus_to_node[busnum];
-
-	/*
-	 * let numa_node_id to decide it later in dma_alloc_pages
-	 * if there is no ram on that node
-	 */
-	if (node != -1 && !node_online(node))
-		node = -1;
-
-	return node;
-}
-
-#else /* CONFIG_X86_32 */
-
-static unsigned char mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-	mp_bus_to_node[busnum] = (unsigned char) node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return 0;
-	node = mp_bus_to_node[busnum];
-	return node;
-}
-
-#endif /* CONFIG_X86_32 */
-
-#endif /* CONFIG_NUMA */
-
 #ifdef CONFIG_X86_64
 
 /*
@@ -301,11 +244,6 @@ static int __init early_fill_mp_bus_info(void)
 	u64 val;
 	u32 address;
 
-#ifdef CONFIG_NUMA
-	for (i = 0; i < BUS_NR; i++)
-		mp_bus_to_node[i] = -1;
-#endif
-
 	if (!early_pci_allowed())
 		return -1;
 
@@ -346,7 +284,7 @@ static int __init early_fill_mp_bus_info(void)
 		node = (reg >> 4) & 0x07;
 #ifdef CONFIG_NUMA
 		for (j = min_bus; j <= max_bus; j++)
-			mp_bus_to_node[j] = (unsigned char) node;
+			set_mp_bus_to_node(j, node);
 #endif
 		link = (reg >> 8) & 0x03;
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 2202b6257b8..5db96d4304d 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -600,3 +600,72 @@ struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
 {
 	return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
 }
+
+/*
+ * NUMA info for PCI busses
+ *
+ * Early arch code is responsible for filling in reasonable values here.
+ * A node id of "-1" means "use current node".  In other words, if a bus
+ * has a -1 node id, it's not tightly coupled to any particular chunk
+ * of memory (as is the case on some Nehalem systems).
+ */
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+#ifdef CONFIG_X86_64
+
+static int mp_bus_to_node[BUS_NR] = {
+	[0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+		mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node = -1;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return node;
+
+	node = mp_bus_to_node[busnum];
+
+	/*
+	 * let numa_node_id to decide it later in dma_alloc_pages
+	 * if there is no ram on that node
+	 */
+	if (node != -1 && !node_online(node))
+		node = -1;
+
+	return node;
+}
+
+#else /* CONFIG_X86_32 */
+
+static unsigned char mp_bus_to_node[BUS_NR] = {
+	[0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+	mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return 0;
+	node = mp_bus_to_node[busnum];
+	return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */
-- 
cgit v1.2.3


From 80286879c209034245f0a28a2171d2ec23b7481c Mon Sep 17 00:00:00 2001
From: Alex Williamson <alex.williamson@hp.com>
Date: Thu, 30 Jul 2009 16:15:18 -0600
Subject: PCI iommu: iommu=pt is a valid early param

This avoids a "Malformed early option 'iommu'" on boot when trying
to use pass-through mode.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/kernel/pci-dma.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..ae13e34f724 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -212,10 +212,8 @@ static __init int iommu_setup(char *p)
 		if (!strncmp(p, "soft", 4))
 			swiotlb = 1;
 #endif
-		if (!strncmp(p, "pt", 2)) {
+		if (!strncmp(p, "pt", 2))
 			iommu_pass_through = 1;
-			return 1;
-		}
 
 		gart_parse_options(p);
 
-- 
cgit v1.2.3


From 6e19314cc98ab9ccc22c30d1c414984ac6de5ce2 Mon Sep 17 00:00:00 2001
From: Mike Mason <mmlnx@us.ibm.com>
Date: Thu, 30 Jul 2009 15:42:39 -0700
Subject: PCI/powerpc: support PCIe fundamental reset

By default, the EEH framework on powerpc does what's known as a "hot
reset" during recovery of a PCI Express device.  We've found a case
where the device needs a "fundamental reset" to recover properly.  The
current PCI error recovery and EEH frameworks do not support this
distinction.

The attached patch makes changes to EEH to utilize the new bit field.

Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Richard Lary <rlary@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/powerpc/kernel/pci_64.c         |  1 +
 arch/powerpc/platforms/pseries/eeh.c | 10 +++++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9e8902fa14c..b6e9ea45a71 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -143,6 +143,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	dev->dev.bus = &pci_bus_type;
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
+	dev->needs_freset = 0;       /* pcie fundamental reset required */
 
 	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
 	dev->device = get_int_prop(node, "device-id", 0xffff);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 989d6462c15..ccd8dd03b8c 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -744,7 +744,15 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 
 static void __rtas_set_slot_reset(struct pci_dn *pdn)
 {
-	rtas_pci_slot_reset (pdn, 1);
+	struct pci_dev *dev = pdn->pcidev;
+
+	/* Determine type of EEH reset required by device,
+	 * default hot reset or fundamental reset
+	 */
+	if (dev->needs_freset)
+		rtas_pci_slot_reset(pdn, 3);
+	else
+		rtas_pci_slot_reset(pdn, 1);
 
 	/* The PCI bus requires that the reset be held high for at least
 	 * a 100 milliseconds. We wait a bit longer 'just in case'.  */
-- 
cgit v1.2.3


From fa526d0d641b5365676a1fb821ce359e217c9b85 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Thu, 3 Sep 2009 12:56:02 -0500
Subject: x86, pat: Fix cacheflush address in change_page_attr_set_clr()

Fix address passed to cpa_flush_range() when changing page
attributes from WB to UC. The address (*addr) is
modified by __change_page_attr_set_clr(). The result is that
the pages being flushed start at the _end_ of the changed range
instead of the beginning.

This should be considered for 2.6.30-stable and 2.6.31-stable.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Stable team <stable@kernel.org>
---
 arch/x86/mm/pageattr.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7e600c1962d..e245775ec85 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -822,6 +822,7 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 {
 	struct cpa_data cpa;
 	int ret, cache, checkalias;
+	unsigned long baddr = 0;
 
 	/*
 	 * Check, if we are requested to change a not supported
@@ -853,6 +854,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 			 */
 			WARN_ON_ONCE(1);
 		}
+		/*
+		 * Save address for cache flush. *addr is modified in the call
+		 * to __change_page_attr_set_clr() below.
+		 */
+		baddr = *addr;
 	}
 
 	/* Must avoid aliasing mappings in the highmem code */
@@ -900,7 +906,7 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 			cpa_flush_array(addr, numpages, cache,
 					cpa.flags, pages);
 		} else
-			cpa_flush_range(*addr, numpages, cache);
+			cpa_flush_range(baddr, numpages, cache);
 	} else
 		cpa_flush_all(cache);
 
-- 
cgit v1.2.3


From 748df9a4c65625c386674c9b54dde73de6cc5af5 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Tue, 8 Sep 2009 12:16:18 +0200
Subject: x86/PCI: pci quirks, fix pci refcounting

Stanse found a pci reference leak in quirk_amd_nb_node.
Instead of putting nb_ht, there is a put of dev passed as
an argument.

http://stanse.fi.muni.cz/

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/kernel/quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index af71d06624b..6c3b2c6fd77 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -508,7 +508,7 @@ static void __init quirk_amd_nb_node(struct pci_dev *dev)
 
 	pci_read_config_dword(nb_ht, 0x60, &val);
 	set_dev_node(&dev->dev, val & 7);
-	pci_dev_put(dev);
+	pci_dev_put(nb_ht);
 }
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
-- 
cgit v1.2.3


From 577eebeae34d340685d8985dfdb7dfe337c511e8 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 27 Aug 2009 12:46:35 -0700
Subject: xen: make -fstack-protector work under Xen

-fstack-protector uses a special per-cpu "stack canary" value.
gcc generates special code in each function to test the canary to make
sure that the function's stack hasn't been overrun.

On x86-64, this is simply an offset of %gs, which is the usual per-cpu
base segment register, so setting it up simply requires loading %gs's
base as normal.

On i386, the stack protector segment is %gs (rather than the usual kernel
percpu %fs segment register).  This requires setting up the full kernel
GDT and then loading %gs accordingly.  We also need to make sure %gs is
initialized when bringing up secondary cpus too.

To keep things consistent, we do the full GDT/segment register setup on
both architectures.

Because we need to avoid -fstack-protected code before setting up the GDT
and because there's no way to disable it on a per-function basis, several
files need to have stack-protector inhibited.

[ Impact: allow Xen booting with stack-protector enabled ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/Makefile     |   4 ++
 arch/x86/xen/Makefile    |   2 +
 arch/x86/xen/enlighten.c | 131 ++++++++++++++++++++++++++++++++++++++++-------
 arch/x86/xen/smp.c       |   1 +
 4 files changed, 119 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index eefdeee8a87..72bb3a26c73 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,10 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o gup.o
 
+# Make sure __phys_addr has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_ioremap.o		:= $(nostackp)
+
 obj-$(CONFIG_SMP)		+= tlb.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 7410640db17..3bb4fc21f4f 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -8,6 +8,7 @@ endif
 # Make sure early boot has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_enlighten.o		:= $(nostackp)
+CFLAGS_mmu.o			:= $(nostackp)
 
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm.o xen-asm_$(BITS).o \
@@ -16,3 +17,4 @@ obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
 obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
+
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index eb33aaa8415..76143136dea 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -51,6 +51,7 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/reboot.h>
+#include <asm/stackprotector.h>
 
 #include "xen-ops.h"
 #include "mmu.h"
@@ -330,18 +331,28 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 	unsigned long frames[pages];
 	int f;
 
-	/* A GDT can be up to 64k in size, which corresponds to 8192
-	   8-byte entries, or 16 4k pages.. */
+	/*
+	 * A GDT can be up to 64k in size, which corresponds to 8192
+	 * 8-byte entries, or 16 4k pages..
+	 */
 
 	BUG_ON(size > 65536);
 	BUG_ON(va & ~PAGE_MASK);
 
 	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
 		int level;
-		pte_t *ptep = lookup_address(va, &level);
+		pte_t *ptep;
 		unsigned long pfn, mfn;
 		void *virt;
 
+		/*
+		 * The GDT is per-cpu and is in the percpu data area.
+		 * That can be virtually mapped, so we need to do a
+		 * page-walk to get the underlying MFN for the
+		 * hypercall.  The page can also be in the kernel's
+		 * linear range, so we need to RO that mapping too.
+		 */
+		ptep = lookup_address(va, &level);
 		BUG_ON(ptep == NULL);
 
 		pfn = pte_pfn(*ptep);
@@ -358,6 +369,44 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 		BUG();
 }
 
+/*
+ * load_gdt for early boot, when the gdt is only mapped once
+ */
+static __init void xen_load_gdt_boot(const struct desc_ptr *dtr)
+{
+	unsigned long va = dtr->address;
+	unsigned int size = dtr->size + 1;
+	unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+	unsigned long frames[pages];
+	int f;
+
+	/*
+	 * A GDT can be up to 64k in size, which corresponds to 8192
+	 * 8-byte entries, or 16 4k pages..
+	 */
+
+	BUG_ON(size > 65536);
+	BUG_ON(va & ~PAGE_MASK);
+
+	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
+		pte_t pte;
+		unsigned long pfn, mfn;
+
+		pfn = virt_to_pfn(va);
+		mfn = pfn_to_mfn(pfn);
+
+		pte = pfn_pte(pfn, PAGE_KERNEL_RO);
+
+		if (HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0))
+			BUG();
+
+		frames[f] = mfn;
+	}
+
+	if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+		BUG();
+}
+
 static void load_TLS_descriptor(struct thread_struct *t,
 				unsigned int cpu, unsigned int i)
 {
@@ -581,6 +630,29 @@ static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
 	preempt_enable();
 }
 
+/*
+ * Version of write_gdt_entry for use at early boot-time needed to
+ * update an entry as simply as possible.
+ */
+static __init void xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
+					    const void *desc, int type)
+{
+	switch (type) {
+	case DESC_LDT:
+	case DESC_TSS:
+		/* ignore */
+		break;
+
+	default: {
+		xmaddr_t maddr = virt_to_machine(&dt[entry]);
+
+		if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
+			dt[entry] = *(struct desc_struct *)desc;
+	}
+
+	}
+}
+
 static void xen_load_sp0(struct tss_struct *tss,
 			 struct thread_struct *thread)
 {
@@ -965,6 +1037,23 @@ static const struct machine_ops __initdata xen_machine_ops = {
 	.emergency_restart = xen_emergency_restart,
 };
 
+/*
+ * Set up the GDT and segment registers for -fstack-protector.  Until
+ * we do this, we have to be careful not to call any stack-protected
+ * function, which is most of the kernel.
+ */
+static void __init xen_setup_stackprotector(void)
+{
+	pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot;
+	pv_cpu_ops.load_gdt = xen_load_gdt_boot;
+
+	setup_stack_canary_segment(0);
+	switch_to_new_gdt(0);
+
+	pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry;
+	pv_cpu_ops.load_gdt = xen_load_gdt;
+}
+
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
@@ -983,13 +1072,28 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
-#ifdef CONFIG_X86_64
 	/*
-	 * Setup percpu state.  We only need to do this for 64-bit
-	 * because 32-bit already has %fs set properly.
+	 * Set up some pagetable state before starting to set any ptes.
 	 */
-	load_percpu_segment(0);
-#endif
+
+	/* Prevent unwanted bits from being set in PTEs. */
+	__supported_pte_mask &= ~_PAGE_GLOBAL;
+	if (!xen_initial_domain())
+		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
+	__supported_pte_mask |= _PAGE_IOMAP;
+
+	xen_setup_features();
+
+	/* Get mfn list */
+	if (!xen_feature(XENFEAT_auto_translated_physmap))
+		xen_build_dynamic_phys_to_machine();
+
+	/*
+	 * Set up kernel GDT and segment registers, mainly so that
+	 * -fstack-protector code can be executed.
+	 */
+	xen_setup_stackprotector();
 
 	xen_init_irq_ops();
 	xen_init_cpuid_mask();
@@ -1001,8 +1105,6 @@ asmlinkage void __init xen_start_kernel(void)
 	set_xen_basic_apic_ops();
 #endif
 
-	xen_setup_features();
-
 	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
 		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
 		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
@@ -1019,17 +1121,8 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_smp_init();
 
-	/* Get mfn list */
-	if (!xen_feature(XENFEAT_auto_translated_physmap))
-		xen_build_dynamic_phys_to_machine();
-
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	/* Prevent unwanted bits from being set in PTEs. */
-	__supported_pte_mask &= ~_PAGE_GLOBAL;
-	if (!xen_initial_domain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
 #ifdef CONFIG_X86_64
 	/* Work out if we support NX */
 	check_efer();
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 429834ec168..fe03eeed7b4 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -236,6 +236,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	ctxt->user_regs.ss = __KERNEL_DS;
 #ifdef CONFIG_X86_32
 	ctxt->user_regs.fs = __KERNEL_PERCPU;
+	ctxt->user_regs.gs = __KERNEL_STACK_CANARY;
 #else
 	ctxt->gs_base_kernel = per_cpu_offset(cpu);
 #endif
-- 
cgit v1.2.3


From 4d576b57b50a92801e6493e76e5243d6cff193d2 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 9 Sep 2009 12:33:51 -0700
Subject: xen: only enable interrupts while actually blocking for spinlock

Where possible we enable interrupts while waiting for a spinlock to
become free, in order to reduce big latency spikes in interrupt handling.

However, at present if we manage to pick up the spinlock just before
blocking, we'll end up holding the lock with interrupts enabled for a
while.  This will cause a deadlock if we recieve an interrupt in that
window, and the interrupt handler tries to take the lock too.

Solve this by shrinking the interrupt-enabled region to just around the
blocking call.

[ Impact: avoid race/deadlock when using Xen PV spinlocks ]

Reported-by: "Yang, Xiaowei" <xiaowei.yang@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/spinlock.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 5601506f2dd..2f91e565192 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -187,7 +187,6 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 	struct xen_spinlock *prev;
 	int irq = __get_cpu_var(lock_kicker_irq);
 	int ret;
-	unsigned long flags;
 	u64 start;
 
 	/* If kicker interrupts not initialized yet, just spin */
@@ -199,16 +198,12 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 	/* announce we're spinning */
 	prev = spinning_lock(xl);
 
-	flags = __raw_local_save_flags();
-	if (irq_enable) {
-		ADD_STATS(taken_slow_irqenable, 1);
-		raw_local_irq_enable();
-	}
-
 	ADD_STATS(taken_slow, 1);
 	ADD_STATS(taken_slow_nested, prev != NULL);
 
 	do {
+		unsigned long flags;
+
 		/* clear pending */
 		xen_clear_irq_pending(irq);
 
@@ -228,6 +223,12 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 			goto out;
 		}
 
+		flags = __raw_local_save_flags();
+		if (irq_enable) {
+			ADD_STATS(taken_slow_irqenable, 1);
+			raw_local_irq_enable();
+		}
+
 		/*
 		 * Block until irq becomes pending.  If we're
 		 * interrupted at this point (after the trylock but
@@ -238,13 +239,15 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 		 * pending.
 		 */
 		xen_poll_irq(irq);
+
+		raw_local_irq_restore(flags);
+
 		ADD_STATS(taken_slow_spurious, !xen_test_irq_pending(irq));
 	} while (!xen_test_irq_pending(irq)); /* check for spurious wakeups */
 
 	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 
 out:
-	raw_local_irq_restore(flags);
 	unspinning_lock(xl, prev);
 	spin_time_accum_blocked(start);
 
-- 
cgit v1.2.3


From 2496afbf1e50c70f80992656bcb730c8583ddac3 Mon Sep 17 00:00:00 2001
From: Yang Xiaowei <xiaowei.yang@intel.com>
Date: Wed, 9 Sep 2009 12:44:52 -0700
Subject: xen: use stronger barrier after unlocking lock

We need to have a stronger barrier between releasing the lock and
checking for any waiting spinners.  A compiler barrier is not sufficient
because the CPU's ordering rules do not prevent the read xl->spinners
from happening before the unlock assignment, as they are different
memory locations.

We need to have an explicit barrier to enforce the write-read ordering
to different memory locations.

Because of it, I can't bring up > 4 HVM guests on one SMP machine.

[ Code and commit comments expanded -J ]

[ Impact: avoid deadlock when using Xen PV spinlocks ]

Signed-off-by: Yang Xiaowei <xiaowei.yang@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/spinlock.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 2f91e565192..36a5141108d 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -326,8 +326,13 @@ static void xen_spin_unlock(struct raw_spinlock *lock)
 	smp_wmb();		/* make sure no writes get moved after unlock */
 	xl->lock = 0;		/* release lock */
 
-	/* make sure unlock happens before kick */
-	barrier();
+	/*
+	 * Make sure unlock happens before checking for waiting
+	 * spinners.  We need a strong barrier to enforce the
+	 * write-read ordering to different memory locations, as the
+	 * CPU makes no implied guarantees about their ordering.
+	 */
+	mb();
 
 	if (unlikely(xl->spinners))
 		xen_spin_unlock_slow(xl);
-- 
cgit v1.2.3


From af39bb8b07af83b579c90c09ba3943123cdb4132 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:00 -0700
Subject: core generic GPIO support for Freescale Coldfire processors.

This adds the basic infrastructure used by all of the different Coldfire CPUs.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/gpio.h              | 238 ++++++++++++++++++++++++++++++
 arch/m68k/include/asm/mcfgpio.h           |  40 +++++
 arch/m68k/include/asm/pinmux.h            |  30 ++++
 arch/m68knommu/Kconfig                    |   6 +
 arch/m68knommu/platform/coldfire/Makefile |   1 +
 arch/m68knommu/platform/coldfire/gpio.c   | 127 ++++++++++++++++
 arch/m68knommu/platform/coldfire/pinmux.c |  28 ++++
 7 files changed, 470 insertions(+)
 create mode 100644 arch/m68k/include/asm/gpio.h
 create mode 100644 arch/m68k/include/asm/mcfgpio.h
 create mode 100644 arch/m68k/include/asm/pinmux.h
 create mode 100644 arch/m68knommu/platform/coldfire/gpio.c
 create mode 100644 arch/m68knommu/platform/coldfire/pinmux.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h
new file mode 100644
index 00000000000..283214dc65a
--- /dev/null
+++ b/arch/m68k/include/asm/gpio.h
@@ -0,0 +1,238 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef coldfire_gpio_h
+#define coldfire_gpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/*
+ * The Freescale Coldfire family is quite varied in how they implement GPIO.
+ * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
+ * only one port, others have multiple ports; some have a single data latch
+ * for both input and output, others have a separate pin data register to read
+ * input; some require a read-modify-write access to change an output, others
+ * have set and clear registers for some of the outputs; Some have all the
+ * GPIOs in a single control area, others have some GPIOs implemented in
+ * different modules.
+ *
+ * This implementation attempts accomodate the differences while presenting
+ * a generic interface that will optimize to as few instructions as possible.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+    defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+
+/* These parts have GPIO organized by 8 bit ports */
+
+#define MCFGPIO_PORTTYPE		u8
+#define MCFGPIO_PORTSIZE		8
+#define mcfgpio_read(port)		__raw_readb(port)
+#define mcfgpio_write(data, port)	__raw_writeb(data, port)
+
+#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
+
+/* These parts have GPIO organized by 16 bit ports */
+
+#define MCFGPIO_PORTTYPE		u16
+#define MCFGPIO_PORTSIZE		16
+#define mcfgpio_read(port)		__raw_readw(port)
+#define mcfgpio_write(data, port)	__raw_writew(data, port)
+
+#elif defined(CONFIG_M5249)
+
+/* These parts have GPIO organized by 32 bit ports */
+
+#define MCFGPIO_PORTTYPE		u32
+#define MCFGPIO_PORTSIZE		32
+#define mcfgpio_read(port)		__raw_readl(port)
+#define mcfgpio_write(data, port)	__raw_writel(data, port)
+
+#endif
+
+#define mcfgpio_bit(gpio)		(1 << ((gpio) %  MCFGPIO_PORTSIZE))
+#define mcfgpio_port(gpio)		((gpio) / MCFGPIO_PORTSIZE)
+
+#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+    defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+/*
+ * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
+ * read-modify-write to change an output and a GPIO module which has separate
+ * set/clr registers to directly change outputs with a single write access.
+ */
+#if defined(CONFIG_M528x)
+/*
+ * The 528x also has GPIOs in other modules (GPT, QADC) which use
+ * read-modify-write as well as those controlled by the EPORT and GPIO modules.
+ */
+#define MCFGPIO_SCR_START		40
+#else
+#define MCFGPIO_SCR_START		8
+#endif
+
+#define MCFGPIO_SETR_PORT(gpio)		(MCFGPIO_SETR + \
+					mcfgpio_port(gpio - MCFGPIO_SCR_START))
+
+#define MCFGPIO_CLRR_PORT(gpio)		(MCFGPIO_CLRR + \
+					mcfgpio_port(gpio - MCFGPIO_SCR_START))
+#else
+
+#define MCFGPIO_SCR_START		MCFGPIO_PIN_MAX
+/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
+#define MCFGPIO_SETR_PORT(gpio)		0
+#define MCFGPIO_CLRR_PORT(gpio)		0
+
+#endif
+/*
+ * Coldfire specific helper functions
+ */
+
+/* return the port pin data register for a gpio */
+static inline u32 __mcf_gpio_ppdr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M5307) || defined(CONFIG_M5407)
+	return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+	if (gpio < 16)
+		return MCFSIM_PADAT;
+	else if (gpio < 32)
+		return MCFSIM_PBDAT;
+	else
+		return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+	if (gpio < 32)
+		return MCFSIM2_GPIOREAD;
+	else
+		return MCFSIM2_GPIO1READ;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+	if (gpio < 8)
+		return MCFEPORT_EPPDR;
+#if defined(CONFIG_M528x)
+	else if (gpio < 16)
+		return MCFGPTA_GPTPORT;
+	else if (gpio < 24)
+		return MCFGPTB_GPTPORT;
+	else if (gpio < 32)
+		return MCFQADC_PORTQA;
+	else if (gpio < 40)
+		return MCFQADC_PORTQB;
+#endif
+	else
+		return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/* return the port output data register for a gpio */
+static inline u32 __mcf_gpio_podr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+    defined(CONFIG_M5307) || defined(CONFIG_M5407)
+	return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+	if (gpio < 16)
+		return MCFSIM_PADAT;
+	else if (gpio < 32)
+		return MCFSIM_PBDAT;
+	else
+		return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249)
+	if (gpio < 32)
+		return MCFSIM2_GPIOWRITE;
+	else
+		return MCFSIM2_GPIO1WRITE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+      defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
+	if (gpio < 8)
+		return MCFEPORT_EPDR;
+#if defined(CONFIG_M528x)
+	else if (gpio < 16)
+		return MCFGPTA_GPTPORT;
+	else if (gpio < 24)
+		return MCFGPTB_GPTPORT;
+	else if (gpio < 32)
+		return MCFQADC_PORTQA;
+	else if (gpio < 40)
+		return MCFQADC_PORTQB;
+#endif
+	else
+		return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#endif
+}
+
+/*
+ * The Generic GPIO functions
+ *
+ * If the gpio is a compile time constant and is one of the Coldfire gpios,
+ * use the inline version, otherwise dispatch thru gpiolib.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
+		return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
+		if (gpio < MCFGPIO_SCR_START) {
+			unsigned long flags;
+			MCFGPIO_PORTTYPE data;
+
+			local_irq_save(flags);
+			data = mcfgpio_read(__mcf_gpio_podr(gpio));
+			if (value)
+				data |= mcfgpio_bit(gpio);
+			else
+				data &= ~mcfgpio_bit(gpio);
+			mcfgpio_write(data, __mcf_gpio_podr(gpio));
+			local_irq_restore(flags);
+		} else {
+			if (value)
+				mcfgpio_write(mcfgpio_bit(gpio),
+						MCFGPIO_SETR_PORT(gpio));
+			else
+				mcfgpio_write(~mcfgpio_bit(gpio),
+						MCFGPIO_CLRR_PORT(gpio));
+		}
+	} else
+		__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return (irq >= MCFGPIO_IRQ_VECBASE &&
+		irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ?
+		irq - MCFGPIO_IRQ_VECBASE : -ENXIO;
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
+}
+
+#endif
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h
new file mode 100644
index 00000000000..ee5e4ccce89
--- /dev/null
+++ b/arch/m68k/include/asm/mcfgpio.h
@@ -0,0 +1,40 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef mcfgpio_h
+#define mcfgpio_h
+
+#include <linux/io.h>
+#include <asm-generic/gpio.h>
+
+struct mcf_gpio_chip {
+	struct gpio_chip gpio_chip;
+	void __iomem *pddr;
+	void __iomem *podr;
+	void __iomem *ppdr;
+	void __iomem *setr;
+	void __iomem *clrr;
+	const u8 *gpio_to_pinmux;
+};
+
+int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
+int mcf_gpio_get_value(struct gpio_chip *, unsigned);
+int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
+void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
+int mcf_gpio_request(struct gpio_chip *, unsigned);
+void mcf_gpio_free(struct gpio_chip *, unsigned);
+
+#endif
diff --git a/arch/m68k/include/asm/pinmux.h b/arch/m68k/include/asm/pinmux.h
new file mode 100644
index 00000000000..119ee686dbd
--- /dev/null
+++ b/arch/m68k/include/asm/pinmux.h
@@ -0,0 +1,30 @@
+/*
+ * Coldfire generic GPIO pinmux support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef pinmux_h
+#define pinmux_h
+
+#define MCFPINMUX_NONE		-1
+
+extern int mcf_pinmux_request(unsigned, unsigned);
+extern void mcf_pinmux_release(unsigned, unsigned);
+
+static inline int mcf_pinmux_is_valid(unsigned pinmux)
+{
+	return pinmux != MCFPINMUX_NONE;
+}
+
+#endif
+
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 534376299a9..e2201b90aa2 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -47,6 +47,10 @@ config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
 
+config GENERIC_GPIO
+	bool
+	default n
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -182,6 +186,8 @@ config M527x
 config COLDFIRE
 	bool
 	depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407)
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	default y
 
 config CLOCK_SET
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 1bcb9372353..2667323c7fe 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -27,4 +27,5 @@ obj-$(CONFIG_M5307)	+= timers.o
 obj-$(CONFIG_M532x)	+= timers.o
 obj-$(CONFIG_M5407)	+= timers.o
 
+obj-y			+= pinmux.o gpio.o
 extra-y := head.o
diff --git a/arch/m68knommu/platform/coldfire/gpio.c b/arch/m68knommu/platform/coldfire/gpio.c
new file mode 100644
index 00000000000..ff004579345
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/gpio.c
@@ -0,0 +1,127 @@
+/*
+ * Coldfire generic GPIO support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/gpio.h>
+#include <asm/pinmux.h>
+#include <asm/mcfgpio.h>
+
+#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
+
+int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE dir;
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	local_irq_save(flags);
+	dir = mcfgpio_read(mcf_chip->pddr);
+	dir &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(dir, mcf_chip->pddr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
+}
+
+int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+		int value)
+{
+	unsigned long flags;
+	MCFGPIO_PORTTYPE data;
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	local_irq_save(flags);
+	/* write the value to the output latch */
+	data = mcfgpio_read(mcf_chip->podr);
+	if (value)
+		data |= mcfgpio_bit(chip->base + offset);
+	else
+		data &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->podr);
+
+	/* now set the direction to output */
+	data = mcfgpio_read(mcf_chip->pddr);
+	data |= mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->pddr);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	unsigned long flags;
+	MCFGPIO_PORTTYPE data;
+
+	local_irq_save(flags);
+	data = mcfgpio_read(mcf_chip->podr);
+	if (value)
+		data |= mcfgpio_bit(chip->base + offset);
+	else
+		data &= ~mcfgpio_bit(chip->base + offset);
+	mcfgpio_write(data, mcf_chip->podr);
+	local_irq_restore(flags);
+}
+
+void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	if (value)
+		mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
+	else
+		mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
+}
+
+int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	return mcf_chip->gpio_to_pinmux ?
+		mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
+}
+
+void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+
+	mcf_gpio_direction_input(chip, offset);
+
+	if (mcf_chip->gpio_to_pinmux)
+		mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
+}
+
+struct sysdev_class mcf_gpio_sysclass = {
+	.name	= "gpio",
+};
+
+static int __init mcf_gpio_sysinit(void)
+{
+	return sysdev_class_register(&mcf_gpio_sysclass);
+}
+
+core_initcall(mcf_gpio_sysinit);
diff --git a/arch/m68knommu/platform/coldfire/pinmux.c b/arch/m68knommu/platform/coldfire/pinmux.c
new file mode 100644
index 00000000000..8c62b825939
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/pinmux.c
@@ -0,0 +1,28 @@
+/*
+ * Coldfire generic GPIO pinmux support.
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/pinmux.h>
+
+int mcf_pinmux_request(unsigned pinmux, unsigned func)
+{
+	return 0;
+}
+
+void mcf_pinmux_release(unsigned pinmux, unsigned func)
+{
+}
-- 
cgit v1.2.3


From bc25b057fa0a0e4754b7e2524c509874649d11ae Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:01 -0700
Subject: generic GPIO support for the Freescale Coldfire 5206.

Add support for the 5206.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5206sim.h      | 10 +++++--
 arch/m68knommu/platform/5206/Makefile |  2 +-
 arch/m68knommu/platform/5206/gpio.c   | 49 +++++++++++++++++++++++++++++++++++
 3 files changed, 58 insertions(+), 3 deletions(-)
 create mode 100644 arch/m68knommu/platform/5206/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 7e3594dea88..7be8a2d3e65 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -85,9 +85,15 @@
 #define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
 #endif
 
-#define	MCFSIM_PADDR		0x1c5		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x1c9		/* Parallel Port Value (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x1c5)	/* Parallel Direction (r/w) */
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x1c9)	/* Parallel Port Value (r/w) */
 
+/*
+ * Generic GPIO
+ */
+#define MCFGPIO_PIN_MAX		8
+#define MCFGPIO_IRQ_VECBASE	-1
+#define MCFGPIO_IRQ_MAX		-1
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
  */
diff --git a/arch/m68knommu/platform/5206/Makefile b/arch/m68knommu/platform/5206/Makefile
index a439d9ab3f2..113c3339006 100644
--- a/arch/m68knommu/platform/5206/Makefile
+++ b/arch/m68knommu/platform/5206/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5206/gpio.c b/arch/m68knommu/platform/5206/gpio.c
new file mode 100644
index 00000000000..60f779ce165
--- /dev/null
+++ b/arch/m68knommu/platform/5206/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From 24a1836ecd471409aeb5362f63032126ebe7fb10 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:02 -0700
Subject: generic GPIO support for the Freescale Coldire 5206e.

Add support for the 5206e.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/5206e/Makefile |  2 +-
 arch/m68knommu/platform/5206e/config.c |  1 +
 arch/m68knommu/platform/5206e/gpio.c   | 49 ++++++++++++++++++++++++++++++++++
 3 files changed, 51 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68knommu/platform/5206e/gpio.c

(limited to 'arch')

diff --git a/arch/m68knommu/platform/5206e/Makefile b/arch/m68knommu/platform/5206e/Makefile
index a439d9ab3f2..113c3339006 100644
--- a/arch/m68knommu/platform/5206e/Makefile
+++ b/arch/m68knommu/platform/5206e/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 65887799db8..fcf1400db51 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -15,6 +15,7 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
 #include <asm/mcfuart.h>
 
diff --git a/arch/m68knommu/platform/5206e/gpio.c b/arch/m68knommu/platform/5206e/gpio.c
new file mode 100644
index 00000000000..60f779ce165
--- /dev/null
+++ b/arch/m68knommu/platform/5206e/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From afde8560b4217338c17b7dbc9e9d7676c1b3a5ff Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:03 -0700
Subject: generic GPIO support for the Freescale Coldfire 520x.

Add support for the 520x.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m520xsim.h      |  56 +++++++++
 arch/m68knommu/platform/520x/Makefile |   2 +-
 arch/m68knommu/platform/520x/gpio.c   | 211 ++++++++++++++++++++++++++++++++++
 3 files changed, 268 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68knommu/platform/520x/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 83bbcfd6e8f..e80b6a54ea9 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -41,6 +41,62 @@
 #define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
 #define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
 
+#define MCFEPORT_EPDDR			0xFC088002
+#define MCFEPORT_EPDR			0xFC088004
+#define MCFEPORT_EPPDR			0xFC088005
+
+#define MCFGPIO_PODR_BUSCTL		0xFC0A4000
+#define MCFGPIO_PODR_BE			0xFC0A4001
+#define MCFGPIO_PODR_CS			0xFC0A4002
+#define MCFGPIO_PODR_FECI2C		0xFC0A4003
+#define MCFGPIO_PODR_QSPI		0xFC0A4004
+#define MCFGPIO_PODR_TIMER		0xFC0A4005
+#define MCFGPIO_PODR_UART		0xFC0A4006
+#define MCFGPIO_PODR_FECH		0xFC0A4007
+#define MCFGPIO_PODR_FECL		0xFC0A4008
+
+#define MCFGPIO_PDDR_BUSCTL		0xFC0A400C
+#define MCFGPIO_PDDR_BE			0xFC0A400D
+#define MCFGPIO_PDDR_CS			0xFC0A400E
+#define MCFGPIO_PDDR_FECI2C		0xFC0A400F
+#define MCFGPIO_PDDR_QSPI		0xFC0A4010
+#define MCFGPIO_PDDR_TIMER		0xFC0A4011
+#define MCFGPIO_PDDR_UART		0xFC0A4012
+#define MCFGPIO_PDDR_FECH		0xFC0A4013
+#define MCFGPIO_PDDR_FECL		0xFC0A4014
+
+#define MCFGPIO_PPDSDR_BUSCTL		0xFC0A401A
+#define MCFGPIO_PPDSDR_BE		0xFC0A401B
+#define MCFGPIO_PPDSDR_CS		0xFC0A401C
+#define MCFGPIO_PPDSDR_FECI2C		0xFC0A401D
+#define MCFGPIO_PPDSDR_QSPI		0xFC0A401E
+#define MCFGPIO_PPDSDR_TIMER		0xFC0A401F
+#define MCFGPIO_PPDSDR_UART		0xFC0A4021
+#define MCFGPIO_PPDSDR_FECH		0xFC0A4021
+#define MCFGPIO_PPDSDR_FECL		0xFC0A4022
+
+#define MCFGPIO_PCLRR_BUSCTL		0xFC0A4024
+#define MCFGPIO_PCLRR_BE		0xFC0A4025
+#define MCFGPIO_PCLRR_CS		0xFC0A4026
+#define MCFGPIO_PCLRR_FECI2C		0xFC0A4027
+#define MCFGPIO_PCLRR_QSPI		0xFC0A4028
+#define MCFGPIO_PCLRR_TIMER		0xFC0A4029
+#define MCFGPIO_PCLRR_UART		0xFC0A402A
+#define MCFGPIO_PCLRR_FECH		0xFC0A402B
+#define MCFGPIO_PCLRR_FECL		0xFC0A402C
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_BUSCTL
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_BUSCTL
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_BUSCTL
+
+#define MCFGPIO_PIN_MAX			80
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+/****************************************************************************/
 
 #define MCF_GPIO_PAR_UART                   (0xA4036)
 #define MCF_GPIO_PAR_FECI2C                 (0xA4033)
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
index a50e76acc8f..435ab3483dc 100644
--- a/arch/m68knommu/platform/520x/Makefile
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -14,4 +14,4 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
diff --git a/arch/m68knommu/platform/520x/gpio.c b/arch/m68knommu/platform/520x/gpio.c
new file mode 100644
index 00000000000..15b5bb62a69
--- /dev/null
+++ b/arch/m68knommu/platform/520x/gpio.c
@@ -0,0 +1,211 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BE",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BE,
+		.podr				= MCFGPIO_PODR_BE,
+		.ppdr				= MCFGPIO_PPDSDR_BE,
+		.setr				= MCFGPIO_PPDSDR_BE,
+		.clrr				= MCFGPIO_PCLRR_BE,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 25,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 48,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UART",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UART,
+		.podr				= MCFGPIO_PODR_UART,
+		.ppdr				= MCFGPIO_PPDSDR_UART,
+		.setr				= MCFGPIO_PPDSDR_UART,
+		.clrr				= MCFGPIO_PCLRR_UART,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECH,
+		.podr				= MCFGPIO_PODR_FECH,
+		.ppdr				= MCFGPIO_PPDSDR_FECH,
+		.setr				= MCFGPIO_PPDSDR_FECH,
+		.clrr				= MCFGPIO_PCLRR_FECH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECL,
+		.podr				= MCFGPIO_PODR_FECL,
+		.ppdr				= MCFGPIO_PPDSDR_FECL,
+		.setr				= MCFGPIO_PPDSDR_FECL,
+		.clrr				= MCFGPIO_PCLRR_FECL,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From a03ce7d9ef05e145ef706f99e68d5ffacf0ad325 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:04 -0700
Subject: generic GPIO support for the Freescale Coldfire 523x.

Add support for the 523x.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m523xsim.h      |  77 +++++++++
 arch/m68knommu/platform/523x/Makefile |   2 +-
 arch/m68knommu/platform/523x/gpio.c   | 283 ++++++++++++++++++++++++++++++++++
 3 files changed, 361 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68knommu/platform/523x/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 55183b5df1b..a34894cf8e6 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -50,5 +50,82 @@
 #define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
 #define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
 
+#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
+#define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
+#define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
+#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100003)
+#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x100006)
+#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x100007)
+#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100009)
+#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_TIMER	(MCF_IPSBAR + 0x10000B)
+#define MCFGPIO_PODR_ETPU	(MCF_IPSBAR + 0x10000C)
+
+#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PDDR_DATAH	(MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PDDR_DATAL	(MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100018)
+#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x100019)
+#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x10001A)
+#define MCFGPIO_PDDR_TIMER	(MCF_IPSBAR + 0x10001B)
+#define MCFGPIO_PDDR_ETPU	(MCF_IPSBAR + 0x10001C)
+
+#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PPDSDR_DATAH	(MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PPDSDR_DATAL	(MCF_IPSBAR + 0x100022)
+#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x100023)
+#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100025)
+#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PPDSDR_TIMER	(MCF_IPSBAR + 0x10002B)
+#define MCFGPIO_PPDSDR_ETPU	(MCF_IPSBAR + 0x10002C)
+
+#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PCLRR_DATAH	(MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PCLRR_DATAL	(MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100034)
+#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x100035)
+#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100036)
+#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100037)
+#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x100038)
+#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100039)
+#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x10003A)
+#define MCFGPIO_PCLRR_TIMER	(MCF_IPSBAR + 0x10003B)
+#define MCFGPIO_PCLRR_ETPU	(MCF_IPSBAR + 0x10003C)
+
+/*
+ * EPort
+ */
+
+#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
+#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
+
+#define MCFGPIO_PIN_MAX			107
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
 /****************************************************************************/
 #endif	/* m523xsim_h */
diff --git a/arch/m68knommu/platform/523x/Makefile b/arch/m68knommu/platform/523x/Makefile
index 5694d593f02..b8f9b45440c 100644
--- a/arch/m68knommu/platform/523x/Makefile
+++ b/arch/m68knommu/platform/523x/Makefile
@@ -14,4 +14,4 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
diff --git a/arch/m68knommu/platform/523x/gpio.c b/arch/m68knommu/platform/523x/gpio.c
new file mode 100644
index 00000000000..f02840d54d3
--- /dev/null
+++ b/arch/m68knommu/platform/523x/gpio.c
@@ -0,0 +1,283 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ADDR",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 13,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ADDR,
+		.podr				= MCFGPIO_PODR_ADDR,
+		.ppdr				= MCFGPIO_PPDSDR_ADDR,
+		.setr				= MCFGPIO_PPDSDR_ADDR,
+		.clrr				= MCFGPIO_PCLRR_ADDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAH,
+		.podr				= MCFGPIO_PODR_DATAH,
+		.ppdr				= MCFGPIO_PPDSDR_DATAH,
+		.setr				= MCFGPIO_PPDSDR_DATAH,
+		.clrr				= MCFGPIO_PCLRR_DATAH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAL,
+		.podr				= MCFGPIO_PODR_DATAL,
+		.ppdr				= MCFGPIO_PPDSDR_DATAL,
+		.setr				= MCFGPIO_PPDSDR_DATAL,
+		.clrr				= MCFGPIO_PCLRR_DATAL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BS,
+		.podr				= MCFGPIO_PODR_BS,
+		.ppdr				= MCFGPIO_PPDSDR_BS,
+		.setr				= MCFGPIO_PPDSDR_BS,
+		.clrr				= MCFGPIO_PCLRR_BS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 49,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SDRAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_SDRAM,
+		.podr				= MCFGPIO_PODR_SDRAM,
+		.ppdr				= MCFGPIO_PPDSDR_SDRAM,
+		.setr				= MCFGPIO_PPDSDR_SDRAM,
+		.clrr				= MCFGPIO_PCLRR_SDRAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTH,
+		.podr				= MCFGPIO_PODR_UARTH,
+		.ppdr				= MCFGPIO_PPDSDR_UARTH,
+		.setr				= MCFGPIO_PPDSDR_UARTH,
+		.clrr				= MCFGPIO_PCLRR_UARTH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTL,
+		.podr				= MCFGPIO_PODR_UARTL,
+		.ppdr				= MCFGPIO_PPDSDR_UARTL,
+		.setr				= MCFGPIO_PPDSDR_UARTL,
+		.clrr				= MCFGPIO_PCLRR_UARTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ETPU",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ETPU,
+		.podr				= MCFGPIO_PODR_ETPU,
+		.ppdr				= MCFGPIO_PPDSDR_ETPU,
+		.setr				= MCFGPIO_PPDSDR_ETPU,
+		.clrr				= MCFGPIO_PCLRR_ETPU,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From 9e8ded166dcc7831ee6f31f8a0937cd9b58e83b0 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:05 -0700
Subject: generic GPIO support for the Freescale Coldfire 5249.

Add support for the 5249.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5249sim.h      | 23 ++++++++-----
 arch/m68knommu/platform/5249/Makefile |  2 +-
 arch/m68knommu/platform/5249/gpio.c   | 65 +++++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+), 10 deletions(-)
 create mode 100644 arch/m68knommu/platform/5249/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 366eb8602d2..2c23a83512a 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -73,14 +73,14 @@
 /*
  *	General purpose IO registers (in MBAR2).
  */
-#define	MCFSIM2_GPIOREAD	0x0		/* GPIO read values */
-#define	MCFSIM2_GPIOWRITE	0x4		/* GPIO write values */
-#define	MCFSIM2_GPIOENABLE	0x8		/* GPIO enabled */
-#define	MCFSIM2_GPIOFUNC	0xc		/* GPIO function */
-#define	MCFSIM2_GPIO1READ	0xb0		/* GPIO1 read values */
-#define	MCFSIM2_GPIO1WRITE	0xb4		/* GPIO1 write values */
-#define	MCFSIM2_GPIO1ENABLE	0xb8		/* GPIO1 enabled */
-#define	MCFSIM2_GPIO1FUNC	0xbc		/* GPIO1 function */
+#define	MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
+#define	MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
+#define	MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
+#define	MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
+#define	MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
+#define	MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
+#define	MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
+#define	MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
 
 #define	MCFSIM2_GPIOINTSTAT	0xc0		/* GPIO interrupt status */
 #define	MCFSIM2_GPIOINTCLEAR	0xc0		/* GPIO interrupt clear */
@@ -100,7 +100,12 @@
 #define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
 #define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
 
-
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX		64
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
 /*
  *	Macro to set IMR register. It is 32 bits on the 5249.
  */
diff --git a/arch/m68knommu/platform/5249/Makefile b/arch/m68knommu/platform/5249/Makefile
index a439d9ab3f2..113c3339006 100644
--- a/arch/m68knommu/platform/5249/Makefile
+++ b/arch/m68knommu/platform/5249/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5249/gpio.c b/arch/m68knommu/platform/5249/gpio.c
new file mode 100644
index 00000000000..c611eab8b3b
--- /dev/null
+++ b/arch/m68knommu/platform/5249/gpio.c
@@ -0,0 +1,65 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "GPIO0",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 32,
+		},
+		.pddr				= MCFSIM2_GPIOENABLE,
+		.podr				= MCFSIM2_GPIOWRITE,
+		.ppdr				= MCFSIM2_GPIOREAD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "GPIO1",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 32,
+			.ngpio			= 32,
+		},
+		.pddr				= MCFSIM2_GPIO1ENABLE,
+		.podr				= MCFSIM2_GPIO1WRITE,
+		.ppdr				= MCFSIM2_GPIO1READ,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From f1554da34f11518bde33776c292c1b58fc20f073 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:06 -0700
Subject: generic GPIO support for the Freescale Coldfire 527x.

Add support for the 5271 & 5275.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m527xsim.h      | 169 ++++++++++
 arch/m68knommu/platform/527x/Makefile |   2 +-
 arch/m68knommu/platform/527x/gpio.c   | 607 ++++++++++++++++++++++++++++++++++
 3 files changed, 777 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68knommu/platform/527x/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 95f4f8ee8f7..453356d72d8 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -54,6 +54,175 @@
 #define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
 #endif
 
+
+#ifdef CONFIG_M5271
+#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
+#define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
+#define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
+#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100003)
+#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x100006)
+#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x100007)
+#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100009)
+#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_TIMER	(MCF_IPSBAR + 0x10000B)
+
+#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PDDR_DATAH	(MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PDDR_DATAL	(MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100018)
+#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x100019)
+#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x10001A)
+#define MCFGPIO_PDDR_TIMER	(MCF_IPSBAR + 0x10001B)
+
+#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PPDSDR_DATAH	(MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PPDSDR_DATAL	(MCF_IPSBAR + 0x100022)
+#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x100023)
+#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100025)
+#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PPDSDR_TIMER	(MCF_IPSBAR + 0x10002B)
+
+#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PCLRR_DATAH	(MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PCLRR_DATAL	(MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100034)
+#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x100035)
+#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100036)
+#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100037)
+#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x100038)
+#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100039)
+#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x10003A)
+#define MCFGPIO_PCLRR_TIMER	(MCF_IPSBAR + 0x10003B)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_ADDR
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_ADDR
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_ADDR
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_ADDR
+
+#define MCFGPIO_PIN_MAX			100
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+#endif
+
+#ifdef CONFIG_M5275
+#define MCFGPIO_PODR_BUSCTL	(MCF_IPSBAR + 0x100004)
+#define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100005)
+#define MCFGPIO_PODR_CS		(MCF_IPSBAR + 0x100008)
+#define MCFGPIO_PODR_FEC0H	(MCF_IPSBAR + 0x10000A)
+#define MCFGPIO_PODR_FEC0L	(MCF_IPSBAR + 0x10000B)
+#define MCFGPIO_PODR_FECI2C	(MCF_IPSBAR + 0x10000C)
+#define MCFGPIO_PODR_QSPI	(MCF_IPSBAR + 0x10000D)
+#define MCFGPIO_PODR_SDRAM	(MCF_IPSBAR + 0x10000E)
+#define MCFGPIO_PODR_TIMERH	(MCF_IPSBAR + 0x10000F)
+#define MCFGPIO_PODR_TIMERL	(MCF_IPSBAR + 0x100010)
+#define MCFGPIO_PODR_UARTL	(MCF_IPSBAR + 0x100011)
+#define MCFGPIO_PODR_FEC1H	(MCF_IPSBAR + 0x100012)
+#define MCFGPIO_PODR_FEC1L	(MCF_IPSBAR + 0x100013)
+#define MCFGPIO_PODR_BS		(MCF_IPSBAR + 0x100014)
+#define MCFGPIO_PODR_IRQ	(MCF_IPSBAR + 0x100015)
+#define MCFGPIO_PODR_USBH	(MCF_IPSBAR + 0x100016)
+#define MCFGPIO_PODR_USBL	(MCF_IPSBAR + 0x100017)
+#define MCFGPIO_PODR_UARTH	(MCF_IPSBAR + 0x100018)
+
+#define MCFGPIO_PDDR_BUSCTL	(MCF_IPSBAR + 0x100020)
+#define MCFGPIO_PDDR_ADDR	(MCF_IPSBAR + 0x100021)
+#define MCFGPIO_PDDR_CS		(MCF_IPSBAR + 0x100024)
+#define MCFGPIO_PDDR_FEC0H	(MCF_IPSBAR + 0x100026)
+#define MCFGPIO_PDDR_FEC0L	(MCF_IPSBAR + 0x100027)
+#define MCFGPIO_PDDR_FECI2C	(MCF_IPSBAR + 0x100028)
+#define MCFGPIO_PDDR_QSPI	(MCF_IPSBAR + 0x100029)
+#define MCFGPIO_PDDR_SDRAM	(MCF_IPSBAR + 0x10002A)
+#define MCFGPIO_PDDR_TIMERH	(MCF_IPSBAR + 0x10002B)
+#define MCFGPIO_PDDR_TIMERL	(MCF_IPSBAR + 0x10002C)
+#define MCFGPIO_PDDR_UARTL	(MCF_IPSBAR + 0x10002D)
+#define MCFGPIO_PDDR_FEC1H	(MCF_IPSBAR + 0x10002E)
+#define MCFGPIO_PDDR_FEC1L	(MCF_IPSBAR + 0x10002F)
+#define MCFGPIO_PDDR_BS		(MCF_IPSBAR + 0x100030)
+#define MCFGPIO_PDDR_IRQ	(MCF_IPSBAR + 0x100031)
+#define MCFGPIO_PDDR_USBH	(MCF_IPSBAR + 0x100032)
+#define MCFGPIO_PDDR_USBL	(MCF_IPSBAR + 0x100033)
+#define MCFGPIO_PDDR_UARTH	(MCF_IPSBAR + 0x100034)
+
+#define MCFGPIO_PPDSDR_BUSCTL	(MCF_IPSBAR + 0x10003C)
+#define MCFGPIO_PPDSDR_ADDR	(MCF_IPSBAR + 0x10003D)
+#define MCFGPIO_PPDSDR_CS	(MCF_IPSBAR + 0x100040)
+#define MCFGPIO_PPDSDR_FEC0H	(MCF_IPSBAR + 0x100042)
+#define MCFGPIO_PPDSDR_FEC0L	(MCF_IPSBAR + 0x100043)
+#define MCFGPIO_PPDSDR_FECI2C	(MCF_IPSBAR + 0x100044)
+#define MCFGPIO_PPDSDR_QSPI	(MCF_IPSBAR + 0x100045)
+#define MCFGPIO_PPDSDR_SDRAM	(MCF_IPSBAR + 0x100046)
+#define MCFGPIO_PPDSDR_TIMERH	(MCF_IPSBAR + 0x100047)
+#define MCFGPIO_PPDSDR_TIMERL	(MCF_IPSBAR + 0x100048)
+#define MCFGPIO_PPDSDR_UARTL	(MCF_IPSBAR + 0x100049)
+#define MCFGPIO_PPDSDR_FEC1H	(MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PPDSDR_FEC1L	(MCF_IPSBAR + 0x10004B)
+#define MCFGPIO_PPDSDR_BS	(MCF_IPSBAR + 0x10004C)
+#define MCFGPIO_PPDSDR_IRQ	(MCF_IPSBAR + 0x10004D)
+#define MCFGPIO_PPDSDR_USBH	(MCF_IPSBAR + 0x10004E)
+#define MCFGPIO_PPDSDR_USBL	(MCF_IPSBAR + 0x10004F)
+#define MCFGPIO_PPDSDR_UARTH	(MCF_IPSBAR + 0x100050)
+
+#define MCFGPIO_PCLRR_BUSCTL	(MCF_IPSBAR + 0x100058)
+#define MCFGPIO_PCLRR_ADDR	(MCF_IPSBAR + 0x100059)
+#define MCFGPIO_PCLRR_CS	(MCF_IPSBAR + 0x10005C)
+#define MCFGPIO_PCLRR_FEC0H	(MCF_IPSBAR + 0x10005E)
+#define MCFGPIO_PCLRR_FEC0L	(MCF_IPSBAR + 0x10005F)
+#define MCFGPIO_PCLRR_FECI2C	(MCF_IPSBAR + 0x100060)
+#define MCFGPIO_PCLRR_QSPI	(MCF_IPSBAR + 0x100061)
+#define MCFGPIO_PCLRR_SDRAM	(MCF_IPSBAR + 0x100062)
+#define MCFGPIO_PCLRR_TIMERH	(MCF_IPSBAR + 0x100063)
+#define MCFGPIO_PCLRR_TIMERL	(MCF_IPSBAR + 0x100064)
+#define MCFGPIO_PCLRR_UARTL	(MCF_IPSBAR + 0x100065)
+#define MCFGPIO_PCLRR_FEC1H	(MCF_IPSBAR + 0x100066)
+#define MCFGPIO_PCLRR_FEC1L	(MCF_IPSBAR + 0x100067)
+#define MCFGPIO_PCLRR_BS	(MCF_IPSBAR + 0x100068)
+#define MCFGPIO_PCLRR_IRQ	(MCF_IPSBAR + 0x100069)
+#define MCFGPIO_PCLRR_USBH	(MCF_IPSBAR + 0x10006A)
+#define MCFGPIO_PCLRR_USBL	(MCF_IPSBAR + 0x10006B)
+#define MCFGPIO_PCLRR_UARTH	(MCF_IPSBAR + 0x10006C)
+
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_BUSCTL
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_BUSCTL
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_BUSCTL
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_BUSCTL
+
+#define MCFGPIO_PIN_MAX			148
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+#endif
+
+/*
+ * EPort
+ */
+
+#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
+#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
+
+
 /*
  *	GPIO pins setups to enable the UARTs.
  */
diff --git a/arch/m68knommu/platform/527x/Makefile b/arch/m68knommu/platform/527x/Makefile
index 26135d92b34..3d90e6d9245 100644
--- a/arch/m68knommu/platform/527x/Makefile
+++ b/arch/m68knommu/platform/527x/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/527x/gpio.c b/arch/m68knommu/platform/527x/gpio.c
new file mode 100644
index 00000000000..1028142851a
--- /dev/null
+++ b/arch/m68knommu/platform/527x/gpio.c
@@ -0,0 +1,607 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+#if defined(CONFIG_M5271)
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ADDR",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 13,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ADDR,
+		.podr				= MCFGPIO_PODR_ADDR,
+		.ppdr				= MCFGPIO_PPDSDR_ADDR,
+		.setr				= MCFGPIO_PPDSDR_ADDR,
+		.clrr				= MCFGPIO_PCLRR_ADDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAH,
+		.podr				= MCFGPIO_PODR_DATAH,
+		.ppdr				= MCFGPIO_PPDSDR_DATAH,
+		.setr				= MCFGPIO_PPDSDR_DATAH,
+		.clrr				= MCFGPIO_PCLRR_DATAH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DATAL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_DATAL,
+		.podr				= MCFGPIO_PODR_DATAL,
+		.ppdr				= MCFGPIO_PPDSDR_DATAL,
+		.setr				= MCFGPIO_PPDSDR_DATAL,
+		.clrr				= MCFGPIO_PCLRR_DATAL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BS,
+		.podr				= MCFGPIO_PODR_BS,
+		.ppdr				= MCFGPIO_PPDSDR_BS,
+		.setr				= MCFGPIO_PPDSDR_BS,
+		.clrr				= MCFGPIO_PCLRR_BS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 49,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SDRAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_SDRAM,
+		.podr				= MCFGPIO_PODR_SDRAM,
+		.ppdr				= MCFGPIO_PPDSDR_SDRAM,
+		.setr				= MCFGPIO_PPDSDR_SDRAM,
+		.clrr				= MCFGPIO_PCLRR_SDRAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTH,
+		.podr				= MCFGPIO_PODR_UARTH,
+		.ppdr				= MCFGPIO_PPDSDR_UARTH,
+		.setr				= MCFGPIO_PPDSDR_UARTH,
+		.clrr				= MCFGPIO_PCLRR_UARTH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTL,
+		.podr				= MCFGPIO_PODR_UARTL,
+		.ppdr				= MCFGPIO_PPDSDR_UARTL,
+		.setr				= MCFGPIO_PPDSDR_UARTL,
+		.clrr				= MCFGPIO_PCLRR_UARTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+#elif defined(CONFIG_M5275)
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "ADDR",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 21,
+			.ngpio			= 3,
+		},
+		.pddr				= MCFGPIO_PDDR_ADDR,
+		.podr				= MCFGPIO_PODR_ADDR,
+		.ppdr				= MCFGPIO_PPDSDR_ADDR,
+		.setr				= MCFGPIO_PPDSDR_ADDR,
+		.clrr				= MCFGPIO_PCLRR_ADDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 25,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC0H",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC0H,
+		.podr				= MCFGPIO_PODR_FEC0H,
+		.ppdr				= MCFGPIO_PPDSDR_FEC0H,
+		.setr				= MCFGPIO_PPDSDR_FEC0H,
+		.clrr				= MCFGPIO_PCLRR_FEC0H,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC0L",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC0L,
+		.podr				= MCFGPIO_PODR_FEC0L,
+		.ppdr				= MCFGPIO_PPDSDR_FEC0L,
+		.setr				= MCFGPIO_PPDSDR_FEC0L,
+		.clrr				= MCFGPIO_PCLRR_FEC0L,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 48,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SDRAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_SDRAM,
+		.podr				= MCFGPIO_PODR_SDRAM,
+		.ppdr				= MCFGPIO_PPDSDR_SDRAM,
+		.setr				= MCFGPIO_PPDSDR_SDRAM,
+		.clrr				= MCFGPIO_PCLRR_SDRAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMERH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMERH,
+		.podr				= MCFGPIO_PODR_TIMERH,
+		.ppdr				= MCFGPIO_PPDSDR_TIMERH,
+		.setr				= MCFGPIO_PPDSDR_TIMERH,
+		.clrr				= MCFGPIO_PCLRR_TIMERH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMERL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMERL,
+		.podr				= MCFGPIO_PODR_TIMERL,
+		.ppdr				= MCFGPIO_PPDSDR_TIMERL,
+		.setr				= MCFGPIO_PPDSDR_TIMERL,
+		.clrr				= MCFGPIO_PCLRR_TIMERL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTL,
+		.podr				= MCFGPIO_PODR_UARTL,
+		.ppdr				= MCFGPIO_PPDSDR_UARTL,
+		.setr				= MCFGPIO_PPDSDR_UARTL,
+		.clrr				= MCFGPIO_PCLRR_UARTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC1H",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC1H,
+		.podr				= MCFGPIO_PODR_FEC1H,
+		.ppdr				= MCFGPIO_PPDSDR_FEC1H,
+		.setr				= MCFGPIO_PPDSDR_FEC1H,
+		.clrr				= MCFGPIO_PCLRR_FEC1H,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FEC1L",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FEC1L,
+		.podr				= MCFGPIO_PODR_FEC1L,
+		.ppdr				= MCFGPIO_PPDSDR_FEC1L,
+		.setr				= MCFGPIO_PPDSDR_FEC1L,
+		.clrr				= MCFGPIO_PCLRR_FEC1L,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 114,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_BS,
+		.podr				= MCFGPIO_PODR_BS,
+		.ppdr				= MCFGPIO_PPDSDR_BS,
+		.setr				= MCFGPIO_PPDSDR_BS,
+		.clrr				= MCFGPIO_PCLRR_BS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "IRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 121,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_PDDR_IRQ,
+		.podr				= MCFGPIO_PODR_IRQ,
+		.ppdr				= MCFGPIO_PPDSDR_IRQ,
+		.setr				= MCFGPIO_PPDSDR_IRQ,
+		.clrr				= MCFGPIO_PCLRR_IRQ,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "USBH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 128,
+			.ngpio			= 1,
+		},
+		.pddr				= MCFGPIO_PDDR_USBH,
+		.podr				= MCFGPIO_PODR_USBH,
+		.ppdr				= MCFGPIO_PPDSDR_USBH,
+		.setr				= MCFGPIO_PPDSDR_USBH,
+		.clrr				= MCFGPIO_PCLRR_USBH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "USBL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 136,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_USBL,
+		.podr				= MCFGPIO_PODR_USBL,
+		.ppdr				= MCFGPIO_PPDSDR_USBL,
+		.setr				= MCFGPIO_PPDSDR_USBL,
+		.clrr				= MCFGPIO_PCLRR_USBL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UARTH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 144,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_UARTH,
+		.podr				= MCFGPIO_PODR_UARTH,
+		.ppdr				= MCFGPIO_PPDSDR_UARTH,
+		.setr				= MCFGPIO_PPDSDR_UARTH,
+		.clrr				= MCFGPIO_PCLRR_UARTH,
+	},
+#endif
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From 316f2c483c32e9385329303258d12e6e33892af5 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:07 -0700
Subject: generic GPIO support for the Freescale Coldfire 5272.

Add support for the 5272.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5272sim.h      | 24 +++++++----
 arch/m68knommu/platform/5272/Makefile |  2 +-
 arch/m68knommu/platform/5272/gpio.c   | 81 +++++++++++++++++++++++++++++++++++
 3 files changed, 97 insertions(+), 10 deletions(-)
 create mode 100644 arch/m68knommu/platform/5272/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 6217edc2113..0665ba1a5d3 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -63,16 +63,22 @@
 #define	MCFSIM_DCMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
 #define	MCFSIM_DCCR1		0x63		/* DRAM 1 Control reg (r/w) */
 
-#define	MCFSIM_PACNT		0x80		/* Port A Control (r/w) */
-#define	MCFSIM_PADDR		0x84		/* Port A Direction (r/w) */
-#define	MCFSIM_PADAT		0x86		/* Port A Data (r/w) */
-#define	MCFSIM_PBCNT		0x88		/* Port B Control (r/w) */
-#define	MCFSIM_PBDDR		0x8c		/* Port B Direction (r/w) */
-#define	MCFSIM_PBDAT		0x8e		/* Port B Data (r/w) */
-#define	MCFSIM_PCDDR		0x94		/* Port C Direction (r/w) */
-#define	MCFSIM_PCDAT		0x96		/* Port C Data (r/w) */
-#define	MCFSIM_PDCNT		0x98		/* Port D Control (r/w) */
+#define	MCFSIM_PACNT		(MCF_MBAR + 0x80) /* Port A Control (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x84) /* Port A Direction (r/w) */
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x86) /* Port A Data (r/w) */
+#define	MCFSIM_PBCNT		(MCF_MBAR + 0x88) /* Port B Control (r/w) */
+#define	MCFSIM_PBDDR		(MCF_MBAR + 0x8c) /* Port B Direction (r/w) */
+#define	MCFSIM_PBDAT		(MCF_MBAR + 0x8e) /* Port B Data (r/w) */
+#define	MCFSIM_PCDDR		(MCF_MBAR + 0x94) /* Port C Direction (r/w) */
+#define	MCFSIM_PCDAT		(MCF_MBAR + 0x96) /* Port C Data (r/w) */
+#define	MCFSIM_PDCNT		(MCF_MBAR + 0x98) /* Port D Control (r/w) */
 
 
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX			48
+#define MCFGPIO_IRQ_MAX			-1
+#define MCFGPIO_IRQ_VECBASE		-1
 /****************************************************************************/
 #endif	/* m5272sim_h */
diff --git a/arch/m68knommu/platform/5272/Makefile b/arch/m68knommu/platform/5272/Makefile
index 26135d92b34..3d90e6d9245 100644
--- a/arch/m68knommu/platform/5272/Makefile
+++ b/arch/m68knommu/platform/5272/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5272/gpio.c b/arch/m68knommu/platform/5272/gpio.c
new file mode 100644
index 00000000000..459db89a89c
--- /dev/null
+++ b/arch/m68knommu/platform/5272/gpio.c
@@ -0,0 +1,81 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "PB",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 16,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PBDDR,
+		.podr				= MCFSIM_PBDAT,
+		.ppdr				= MCFSIM_PBDAT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "PC",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 32,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PCDDR,
+		.podr				= MCFSIM_PCDAT,
+		.ppdr				= MCFSIM_PCDAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From 6da6e63c96f5fc8a92b6d1d6f12c2bf998588ffe Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:08 -0700
Subject: generic GPIO support for the Freescale Coldfire 528x.

Add support for the 528x.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m528xsim.h      | 151 ++++++++++++
 arch/m68knommu/platform/528x/Makefile |   2 +-
 arch/m68knommu/platform/528x/gpio.c   | 438 ++++++++++++++++++++++++++++++++++
 3 files changed, 590 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68knommu/platform/528x/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index d79c49f8134..e2ad1f42b65 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -40,6 +40,157 @@
 #define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
 #define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
 
+/*
+ * 	GPIO registers
+ */
+#define MCFGPIO_PORTA		(MCF_IPSBAR + 0x00100000)
+#define MCFGPIO_PORTB		(MCF_IPSBAR + 0x00100001)
+#define MCFGPIO_PORTC		(MCF_IPSBAR + 0x00100002)
+#define MCFGPIO_PORTD		(MCF_IPSBAR + 0x00100003)
+#define MCFGPIO_PORTE		(MCF_IPSBAR + 0x00100004)
+#define MCFGPIO_PORTF		(MCF_IPSBAR + 0x00100005)
+#define MCFGPIO_PORTG		(MCF_IPSBAR + 0x00100006)
+#define MCFGPIO_PORTH		(MCF_IPSBAR + 0x00100007)
+#define MCFGPIO_PORTJ		(MCF_IPSBAR + 0x00100008)
+#define MCFGPIO_PORTDD		(MCF_IPSBAR + 0x00100009)
+#define MCFGPIO_PORTEH		(MCF_IPSBAR + 0x0010000A)
+#define MCFGPIO_PORTEL		(MCF_IPSBAR + 0x0010000B)
+#define MCFGPIO_PORTAS		(MCF_IPSBAR + 0x0010000C)
+#define MCFGPIO_PORTQS		(MCF_IPSBAR + 0x0010000D)
+#define MCFGPIO_PORTSD		(MCF_IPSBAR + 0x0010000E)
+#define MCFGPIO_PORTTC		(MCF_IPSBAR + 0x0010000F)
+#define MCFGPIO_PORTTD		(MCF_IPSBAR + 0x00100010)
+#define MCFGPIO_PORTUA		(MCF_IPSBAR + 0x00100011)
+
+#define MCFGPIO_DDRA		(MCF_IPSBAR + 0x00100014)
+#define MCFGPIO_DDRB		(MCF_IPSBAR + 0x00100015)
+#define MCFGPIO_DDRC		(MCF_IPSBAR + 0x00100016)
+#define MCFGPIO_DDRD		(MCF_IPSBAR + 0x00100017)
+#define MCFGPIO_DDRE		(MCF_IPSBAR + 0x00100018)
+#define MCFGPIO_DDRF		(MCF_IPSBAR + 0x00100019)
+#define MCFGPIO_DDRG		(MCF_IPSBAR + 0x0010001A)
+#define MCFGPIO_DDRH		(MCF_IPSBAR + 0x0010001B)
+#define MCFGPIO_DDRJ		(MCF_IPSBAR + 0x0010001C)
+#define MCFGPIO_DDRDD		(MCF_IPSBAR + 0x0010001D)
+#define MCFGPIO_DDREH		(MCF_IPSBAR + 0x0010001E)
+#define MCFGPIO_DDREL		(MCF_IPSBAR + 0x0010001F)
+#define MCFGPIO_DDRAS		(MCF_IPSBAR + 0x00100020)
+#define MCFGPIO_DDRQS		(MCF_IPSBAR + 0x00100021)
+#define MCFGPIO_DDRSD		(MCF_IPSBAR + 0x00100022)
+#define MCFGPIO_DDRTC		(MCF_IPSBAR + 0x00100023)
+#define MCFGPIO_DDRTD		(MCF_IPSBAR + 0x00100024)
+#define MCFGPIO_DDRUA		(MCF_IPSBAR + 0x00100025)
+
+#define MCFGPIO_PORTAP		(MCF_IPSBAR + 0x00100028)
+#define MCFGPIO_PORTBP		(MCF_IPSBAR + 0x00100029)
+#define MCFGPIO_PORTCP		(MCF_IPSBAR + 0x0010002A)
+#define MCFGPIO_PORTDP		(MCF_IPSBAR + 0x0010002B)
+#define MCFGPIO_PORTEP		(MCF_IPSBAR + 0x0010002C)
+#define MCFGPIO_PORTFP		(MCF_IPSBAR + 0x0010002D)
+#define MCFGPIO_PORTGP		(MCF_IPSBAR + 0x0010002E)
+#define MCFGPIO_PORTHP		(MCF_IPSBAR + 0x0010002F)
+#define MCFGPIO_PORTJP		(MCF_IPSBAR + 0x00100030)
+#define MCFGPIO_PORTDDP		(MCF_IPSBAR + 0x00100031)
+#define MCFGPIO_PORTEHP		(MCF_IPSBAR + 0x00100032)
+#define MCFGPIO_PORTELP		(MCF_IPSBAR + 0x00100033)
+#define MCFGPIO_PORTASP		(MCF_IPSBAR + 0x00100034)
+#define MCFGPIO_PORTQSP		(MCF_IPSBAR + 0x00100035)
+#define MCFGPIO_PORTSDP		(MCF_IPSBAR + 0x00100036)
+#define MCFGPIO_PORTTCP		(MCF_IPSBAR + 0x00100037)
+#define MCFGPIO_PORTTDP		(MCF_IPSBAR + 0x00100038)
+#define MCFGPIO_PORTUAP		(MCF_IPSBAR + 0x00100039)
+
+#define MCFGPIO_SETA		(MCF_IPSBAR + 0x00100028)
+#define MCFGPIO_SETB		(MCF_IPSBAR + 0x00100029)
+#define MCFGPIO_SETC		(MCF_IPSBAR + 0x0010002A)
+#define MCFGPIO_SETD		(MCF_IPSBAR + 0x0010002B)
+#define MCFGPIO_SETE		(MCF_IPSBAR + 0x0010002C)
+#define MCFGPIO_SETF		(MCF_IPSBAR + 0x0010002D)
+#define MCFGPIO_SETG		(MCF_IPSBAR + 0x0010002E)
+#define MCFGPIO_SETH		(MCF_IPSBAR + 0x0010002F)
+#define MCFGPIO_SETJ		(MCF_IPSBAR + 0x00100030)
+#define MCFGPIO_SETDD		(MCF_IPSBAR + 0x00100031)
+#define MCFGPIO_SETEH		(MCF_IPSBAR + 0x00100032)
+#define MCFGPIO_SETEL		(MCF_IPSBAR + 0x00100033)
+#define MCFGPIO_SETAS		(MCF_IPSBAR + 0x00100034)
+#define MCFGPIO_SETQS		(MCF_IPSBAR + 0x00100035)
+#define MCFGPIO_SETSD		(MCF_IPSBAR + 0x00100036)
+#define MCFGPIO_SETTC		(MCF_IPSBAR + 0x00100037)
+#define MCFGPIO_SETTD		(MCF_IPSBAR + 0x00100038)
+#define MCFGPIO_SETUA		(MCF_IPSBAR + 0x00100039)
+
+#define MCFGPIO_CLRA		(MCF_IPSBAR + 0x0010003C)
+#define MCFGPIO_CLRB		(MCF_IPSBAR + 0x0010003D)
+#define MCFGPIO_CLRC		(MCF_IPSBAR + 0x0010003E)
+#define MCFGPIO_CLRD		(MCF_IPSBAR + 0x0010003F)
+#define MCFGPIO_CLRE		(MCF_IPSBAR + 0x00100040)
+#define MCFGPIO_CLRF		(MCF_IPSBAR + 0x00100041)
+#define MCFGPIO_CLRG		(MCF_IPSBAR + 0x00100042)
+#define MCFGPIO_CLRH		(MCF_IPSBAR + 0x00100043)
+#define MCFGPIO_CLRJ		(MCF_IPSBAR + 0x00100044)
+#define MCFGPIO_CLRDD		(MCF_IPSBAR + 0x00100045)
+#define MCFGPIO_CLREH		(MCF_IPSBAR + 0x00100046)
+#define MCFGPIO_CLREL		(MCF_IPSBAR + 0x00100047)
+#define MCFGPIO_CLRAS		(MCF_IPSBAR + 0x00100048)
+#define MCFGPIO_CLRQS		(MCF_IPSBAR + 0x00100049)
+#define MCFGPIO_CLRSD		(MCF_IPSBAR + 0x0010004A)
+#define MCFGPIO_CLRTC		(MCF_IPSBAR + 0x0010004B)
+#define MCFGPIO_CLRTD		(MCF_IPSBAR + 0x0010004C)
+#define MCFGPIO_CLRUA		(MCF_IPSBAR + 0x0010004D)
+
+#define MCFGPIO_PBCDPAR		(MCF_IPSBAR + 0x00100050)
+#define MCFGPIO_PFPAR		(MCF_IPSBAR + 0x00100051)
+#define MCFGPIO_PEPAR		(MCF_IPSBAR + 0x00100052)
+#define MCFGPIO_PJPAR		(MCF_IPSBAR + 0x00100054)
+#define MCFGPIO_PSDPAR		(MCF_IPSBAR + 0x00100055)
+#define MCFGPIO_PASPAR		(MCF_IPSBAR + 0x00100056)
+#define MCFGPIO_PEHLPAR		(MCF_IPSBAR + 0x00100058)
+#define MCFGPIO_PQSPAR		(MCF_IPSBAR + 0x00100059)
+#define MCFGPIO_PTCPAR		(MCF_IPSBAR + 0x0010005A)
+#define MCFGPIO_PTDPAR		(MCF_IPSBAR + 0x0010005B)
+#define MCFGPIO_PUAPAR		(MCF_IPSBAR + 0x0010005C)
+
+/*
+ * 	Edge Port registers
+ */
+#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x00130000)
+#define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x00130002)
+#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x00130003)
+#define MCFEPORT_EPDR		(MCF_IPSBAR + 0x00130004)
+#define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x00130005)
+#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x00130006)
+
+/*
+ * 	Queued ADC registers
+ */
+#define MCFQADC_PORTQA		(MCF_IPSBAR + 0x00190006)
+#define MCFQADC_PORTQB		(MCF_IPSBAR + 0x00190007)
+#define MCFQADC_DDRQA		(MCF_IPSBAR + 0x00190008)
+#define MCFQADC_DDRQB		(MCF_IPSBAR + 0x00190009)
+
+/*
+ * 	General Purpose Timers registers
+ */
+#define MCFGPTA_GPTPORT		(MCF_IPSBAR + 0x001A001D)
+#define MCFGPTA_GPTDDR		(MCF_IPSBAR + 0x001A001E)
+#define MCFGPTB_GPTPORT		(MCF_IPSBAR + 0x001B001D)
+#define MCFGPTB_GPTDDR		(MCF_IPSBAR + 0x001B001E)
+/*
+ *
+ * definitions for generic gpio support
+ *
+ */
+#define MCFGPIO_PODR		MCFGPIO_PORTA	/* port output data */
+#define MCFGPIO_PDDR		MCFGPIO_DDRA	/* port data direction */
+#define MCFGPIO_PPDR		MCFGPIO_PORTAP	/* port pin data */
+#define MCFGPIO_SETR		MCFGPIO_SETA	/* set output */
+#define MCFGPIO_CLRR		MCFGPIO_CLRA	/* clr output */
+
+#define MCFGPIO_IRQ_MAX		8
+#define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
+#define MCFGPIO_PIN_MAX		180
+
+
 /*
  *	Derek Cheung - 6 Feb 2005
  *		add I2C and QSPI register definition using Freescale's MCF5282
diff --git a/arch/m68knommu/platform/528x/Makefile b/arch/m68knommu/platform/528x/Makefile
index 26135d92b34..3d90e6d9245 100644
--- a/arch/m68knommu/platform/528x/Makefile
+++ b/arch/m68knommu/platform/528x/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/528x/gpio.c b/arch/m68knommu/platform/528x/gpio.c
new file mode 100644
index 00000000000..ec593950696
--- /dev/null
+++ b/arch/m68knommu/platform/528x/gpio.c
@@ -0,0 +1,438 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "NQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.base			= 1,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPTA_GPTDDR,
+		.podr				= MCFGPTA_GPTPORT,
+		.ppdr				= MCFGPTB_GPTPORT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TB",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPTB_GPTDDR,
+		.podr				= MCFGPTB_GPTPORT,
+		.ppdr				= MCFGPTB_GPTPORT,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFQADC_DDRQA,
+		.podr				= MCFQADC_PORTQA,
+		.ppdr				= MCFQADC_PORTQA,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QB",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFQADC_DDRQB,
+		.podr				= MCFQADC_PORTQB,
+		.ppdr				= MCFQADC_PORTQB,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "A",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRA,
+		.podr				= MCFGPIO_PORTA,
+		.ppdr				= MCFGPIO_PORTAP,
+		.setr				= MCFGPIO_SETA,
+		.clrr				= MCFGPIO_CLRA,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "B",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 48,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRB,
+		.podr				= MCFGPIO_PORTB,
+		.ppdr				= MCFGPIO_PORTBP,
+		.setr				= MCFGPIO_SETB,
+		.clrr				= MCFGPIO_CLRB,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 56,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRC,
+		.podr				= MCFGPIO_PORTC,
+		.ppdr				= MCFGPIO_PORTCP,
+		.setr				= MCFGPIO_SETC,
+		.clrr				= MCFGPIO_CLRC,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "D",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRD,
+		.podr				= MCFGPIO_PORTD,
+		.ppdr				= MCFGPIO_PORTDP,
+		.setr				= MCFGPIO_SETD,
+		.clrr				= MCFGPIO_CLRD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "E",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRE,
+		.podr				= MCFGPIO_PORTE,
+		.ppdr				= MCFGPIO_PORTEP,
+		.setr				= MCFGPIO_SETE,
+		.clrr				= MCFGPIO_CLRE,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "F",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRF,
+		.podr				= MCFGPIO_PORTF,
+		.ppdr				= MCFGPIO_PORTFP,
+		.setr				= MCFGPIO_SETF,
+		.clrr				= MCFGPIO_CLRF,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "G",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRG,
+		.podr				= MCFGPIO_PORTG,
+		.ppdr				= MCFGPIO_PORTGP,
+		.setr				= MCFGPIO_SETG,
+		.clrr				= MCFGPIO_CLRG,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "H",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRH,
+		.podr				= MCFGPIO_PORTH,
+		.ppdr				= MCFGPIO_PORTHP,
+		.setr				= MCFGPIO_SETH,
+		.clrr				= MCFGPIO_CLRH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "J",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRJ,
+		.podr				= MCFGPIO_PORTJ,
+		.ppdr				= MCFGPIO_PORTJP,
+		.setr				= MCFGPIO_SETJ,
+		.clrr				= MCFGPIO_CLRJ,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "DD",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 112,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDRDD,
+		.podr				= MCFGPIO_PORTDD,
+		.ppdr				= MCFGPIO_PORTDDP,
+		.setr				= MCFGPIO_SETDD,
+		.clrr				= MCFGPIO_CLRDD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "EH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 120,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDREH,
+		.podr				= MCFGPIO_PORTEH,
+		.ppdr				= MCFGPIO_PORTEHP,
+		.setr				= MCFGPIO_SETEH,
+		.clrr				= MCFGPIO_CLREH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "EL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 128,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_DDREL,
+		.podr				= MCFGPIO_PORTEL,
+		.ppdr				= MCFGPIO_PORTELP,
+		.setr				= MCFGPIO_SETEL,
+		.clrr				= MCFGPIO_CLREL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "AS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 136,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_DDRAS,
+		.podr				= MCFGPIO_PORTAS,
+		.ppdr				= MCFGPIO_PORTASP,
+		.setr				= MCFGPIO_SETAS,
+		.clrr				= MCFGPIO_CLRAS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 144,
+			.ngpio			= 7,
+		},
+		.pddr				= MCFGPIO_DDRQS,
+		.podr				= MCFGPIO_PORTQS,
+		.ppdr				= MCFGPIO_PORTQSP,
+		.setr				= MCFGPIO_SETQS,
+		.clrr				= MCFGPIO_CLRQS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SD",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 152,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_DDRSD,
+		.podr				= MCFGPIO_PORTSD,
+		.ppdr				= MCFGPIO_PORTSDP,
+		.setr				= MCFGPIO_SETSD,
+		.clrr				= MCFGPIO_CLRSD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TC",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 160,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_DDRTC,
+		.podr				= MCFGPIO_PORTTC,
+		.ppdr				= MCFGPIO_PORTTCP,
+		.setr				= MCFGPIO_SETTC,
+		.clrr				= MCFGPIO_CLRTC,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TD",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 168,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_DDRTD,
+		.podr				= MCFGPIO_PORTTD,
+		.ppdr				= MCFGPIO_PORTTDP,
+		.setr				= MCFGPIO_SETTD,
+		.clrr				= MCFGPIO_CLRTD,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UA",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 176,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_DDRUA,
+		.podr				= MCFGPIO_PORTUA,
+		.ppdr				= MCFGPIO_PORTUAP,
+		.setr				= MCFGPIO_SETUA,
+		.clrr				= MCFGPIO_CLRUA,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From f7a20ba06435d067247bd50a15a1d550b9b3fc7d Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:09 -0700
Subject: generic GPIO support for the Freescale Coldfire 5307.

Add support for the 5307.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5307sim.h      | 11 ++++++--
 arch/m68knommu/platform/5307/Makefile |  2 +-
 arch/m68knommu/platform/5307/gpio.c   | 49 +++++++++++++++++++++++++++++++++++
 3 files changed, 59 insertions(+), 3 deletions(-)
 create mode 100644 arch/m68knommu/platform/5307/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 5886728409c..6a1870c925a 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -90,8 +90,15 @@
 #define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
 
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX			16
+#define MCFGPIO_IRQ_MAX			-1
+#define MCFGPIO_IRQ_VECBASE		-1
 
 
 /* Definition offset address for CS2-7  -- old mask 5307 */
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index cfd586860fd..667db659845 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y	+= config.o
+obj-y	+= config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5307/gpio.c b/arch/m68knommu/platform/5307/gpio.c
new file mode 100644
index 00000000000..8da5880e406
--- /dev/null
+++ b/arch/m68knommu/platform/5307/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From 7846fe800a81adae1e28d9d035b5226f75358280 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:10 -0700
Subject: generic GPIO support for the Freescale Coldfire 532x.

Add support for the 532x.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m532xsim.h      | 154 +++++++++-------
 arch/m68knommu/platform/532x/Makefile |   2 +-
 arch/m68knommu/platform/532x/config.c |   4 +-
 arch/m68knommu/platform/532x/gpio.c   | 337 ++++++++++++++++++++++++++++++++++
 4 files changed, 424 insertions(+), 73 deletions(-)
 create mode 100644 arch/m68knommu/platform/532x/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index eb7fd444894..3e80810b378 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -422,70 +422,70 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_GPIO_PODR_FECH		MCF_REG08(0xFC0A4000)
-#define MCF_GPIO_PODR_FECL		MCF_REG08(0xFC0A4001)
-#define MCF_GPIO_PODR_SSI		MCF_REG08(0xFC0A4002)
-#define MCF_GPIO_PODR_BUSCTL		MCF_REG08(0xFC0A4003)
-#define MCF_GPIO_PODR_BE		MCF_REG08(0xFC0A4004)
-#define MCF_GPIO_PODR_CS		MCF_REG08(0xFC0A4005)
-#define MCF_GPIO_PODR_PWM		MCF_REG08(0xFC0A4006)
-#define MCF_GPIO_PODR_FECI2C		MCF_REG08(0xFC0A4007)
-#define MCF_GPIO_PODR_UART		MCF_REG08(0xFC0A4009)
-#define MCF_GPIO_PODR_QSPI		MCF_REG08(0xFC0A400A)
-#define MCF_GPIO_PODR_TIMER		MCF_REG08(0xFC0A400B)
-#define MCF_GPIO_PODR_LCDDATAH		MCF_REG08(0xFC0A400D)
-#define MCF_GPIO_PODR_LCDDATAM		MCF_REG08(0xFC0A400E)
-#define MCF_GPIO_PODR_LCDDATAL		MCF_REG08(0xFC0A400F)
-#define MCF_GPIO_PODR_LCDCTLH		MCF_REG08(0xFC0A4010)
-#define MCF_GPIO_PODR_LCDCTLL		MCF_REG08(0xFC0A4011)
-#define MCF_GPIO_PDDR_FECH		MCF_REG08(0xFC0A4014)
-#define MCF_GPIO_PDDR_FECL		MCF_REG08(0xFC0A4015)
-#define MCF_GPIO_PDDR_SSI		MCF_REG08(0xFC0A4016)
-#define MCF_GPIO_PDDR_BUSCTL		MCF_REG08(0xFC0A4017)
-#define MCF_GPIO_PDDR_BE		MCF_REG08(0xFC0A4018)
-#define MCF_GPIO_PDDR_CS		MCF_REG08(0xFC0A4019)
-#define MCF_GPIO_PDDR_PWM		MCF_REG08(0xFC0A401A)
-#define MCF_GPIO_PDDR_FECI2C		MCF_REG08(0xFC0A401B)
-#define MCF_GPIO_PDDR_UART		MCF_REG08(0xFC0A401C)
-#define MCF_GPIO_PDDR_QSPI		MCF_REG08(0xFC0A401E)
-#define MCF_GPIO_PDDR_TIMER		MCF_REG08(0xFC0A401F)
-#define MCF_GPIO_PDDR_LCDDATAH		MCF_REG08(0xFC0A4021)
-#define MCF_GPIO_PDDR_LCDDATAM		MCF_REG08(0xFC0A4022)
-#define MCF_GPIO_PDDR_LCDDATAL		MCF_REG08(0xFC0A4023)
-#define MCF_GPIO_PDDR_LCDCTLH		MCF_REG08(0xFC0A4024)
-#define MCF_GPIO_PDDR_LCDCTLL		MCF_REG08(0xFC0A4025)
-#define MCF_GPIO_PPDSDR_FECH		MCF_REG08(0xFC0A4028)
-#define MCF_GPIO_PPDSDR_FECL		MCF_REG08(0xFC0A4029)
-#define MCF_GPIO_PPDSDR_SSI		MCF_REG08(0xFC0A402A)
-#define MCF_GPIO_PPDSDR_BUSCTL		MCF_REG08(0xFC0A402B)
-#define MCF_GPIO_PPDSDR_BE		MCF_REG08(0xFC0A402C)
-#define MCF_GPIO_PPDSDR_CS		MCF_REG08(0xFC0A402D)
-#define MCF_GPIO_PPDSDR_PWM		MCF_REG08(0xFC0A402E)
-#define MCF_GPIO_PPDSDR_FECI2C		MCF_REG08(0xFC0A402F)
-#define MCF_GPIO_PPDSDR_UART		MCF_REG08(0xFC0A4031)
-#define MCF_GPIO_PPDSDR_QSPI		MCF_REG08(0xFC0A4032)
-#define MCF_GPIO_PPDSDR_TIMER		MCF_REG08(0xFC0A4033)
-#define MCF_GPIO_PPDSDR_LCDDATAH	MCF_REG08(0xFC0A4035)
-#define MCF_GPIO_PPDSDR_LCDDATAM	MCF_REG08(0xFC0A4036)
-#define MCF_GPIO_PPDSDR_LCDDATAL	MCF_REG08(0xFC0A4037)
-#define MCF_GPIO_PPDSDR_LCDCTLH		MCF_REG08(0xFC0A4038)
-#define MCF_GPIO_PPDSDR_LCDCTLL		MCF_REG08(0xFC0A4039)
-#define MCF_GPIO_PCLRR_FECH		MCF_REG08(0xFC0A403C)
-#define MCF_GPIO_PCLRR_FECL		MCF_REG08(0xFC0A403D)
-#define MCF_GPIO_PCLRR_SSI		MCF_REG08(0xFC0A403E)
-#define MCF_GPIO_PCLRR_BUSCTL		MCF_REG08(0xFC0A403F)
-#define MCF_GPIO_PCLRR_BE		MCF_REG08(0xFC0A4040)
-#define MCF_GPIO_PCLRR_CS		MCF_REG08(0xFC0A4041)
-#define MCF_GPIO_PCLRR_PWM		MCF_REG08(0xFC0A4042)
-#define MCF_GPIO_PCLRR_FECI2C		MCF_REG08(0xFC0A4043)
-#define MCF_GPIO_PCLRR_UART		MCF_REG08(0xFC0A4045)
-#define MCF_GPIO_PCLRR_QSPI		MCF_REG08(0xFC0A4046)
-#define MCF_GPIO_PCLRR_TIMER		MCF_REG08(0xFC0A4047)
-#define MCF_GPIO_PCLRR_LCDDATAH		MCF_REG08(0xFC0A4049)
-#define MCF_GPIO_PCLRR_LCDDATAM		MCF_REG08(0xFC0A404A)
-#define MCF_GPIO_PCLRR_LCDDATAL		MCF_REG08(0xFC0A404B)
-#define MCF_GPIO_PCLRR_LCDCTLH		MCF_REG08(0xFC0A404C)
-#define MCF_GPIO_PCLRR_LCDCTLL		MCF_REG08(0xFC0A404D)
+#define MCFGPIO_PODR_FECH		(0xFC0A4000)
+#define MCFGPIO_PODR_FECL		(0xFC0A4001)
+#define MCFGPIO_PODR_SSI		(0xFC0A4002)
+#define MCFGPIO_PODR_BUSCTL		(0xFC0A4003)
+#define MCFGPIO_PODR_BE			(0xFC0A4004)
+#define MCFGPIO_PODR_CS			(0xFC0A4005)
+#define MCFGPIO_PODR_PWM		(0xFC0A4006)
+#define MCFGPIO_PODR_FECI2C		(0xFC0A4007)
+#define MCFGPIO_PODR_UART		(0xFC0A4009)
+#define MCFGPIO_PODR_QSPI		(0xFC0A400A)
+#define MCFGPIO_PODR_TIMER		(0xFC0A400B)
+#define MCFGPIO_PODR_LCDDATAH		(0xFC0A400D)
+#define MCFGPIO_PODR_LCDDATAM		(0xFC0A400E)
+#define MCFGPIO_PODR_LCDDATAL		(0xFC0A400F)
+#define MCFGPIO_PODR_LCDCTLH		(0xFC0A4010)
+#define MCFGPIO_PODR_LCDCTLL		(0xFC0A4011)
+#define MCFGPIO_PDDR_FECH		(0xFC0A4014)
+#define MCFGPIO_PDDR_FECL		(0xFC0A4015)
+#define MCFGPIO_PDDR_SSI		(0xFC0A4016)
+#define MCFGPIO_PDDR_BUSCTL		(0xFC0A4017)
+#define MCFGPIO_PDDR_BE			(0xFC0A4018)
+#define MCFGPIO_PDDR_CS			(0xFC0A4019)
+#define MCFGPIO_PDDR_PWM		(0xFC0A401A)
+#define MCFGPIO_PDDR_FECI2C		(0xFC0A401B)
+#define MCFGPIO_PDDR_UART		(0xFC0A401C)
+#define MCFGPIO_PDDR_QSPI		(0xFC0A401E)
+#define MCFGPIO_PDDR_TIMER		(0xFC0A401F)
+#define MCFGPIO_PDDR_LCDDATAH		(0xFC0A4021)
+#define MCFGPIO_PDDR_LCDDATAM		(0xFC0A4022)
+#define MCFGPIO_PDDR_LCDDATAL		(0xFC0A4023)
+#define MCFGPIO_PDDR_LCDCTLH		(0xFC0A4024)
+#define MCFGPIO_PDDR_LCDCTLL		(0xFC0A4025)
+#define MCFGPIO_PPDSDR_FECH		(0xFC0A4028)
+#define MCFGPIO_PPDSDR_FECL		(0xFC0A4029)
+#define MCFGPIO_PPDSDR_SSI		(0xFC0A402A)
+#define MCFGPIO_PPDSDR_BUSCTL		(0xFC0A402B)
+#define MCFGPIO_PPDSDR_BE		(0xFC0A402C)
+#define MCFGPIO_PPDSDR_CS		(0xFC0A402D)
+#define MCFGPIO_PPDSDR_PWM		(0xFC0A402E)
+#define MCFGPIO_PPDSDR_FECI2C		(0xFC0A402F)
+#define MCFGPIO_PPDSDR_UART		(0xFC0A4031)
+#define MCFGPIO_PPDSDR_QSPI		(0xFC0A4032)
+#define MCFGPIO_PPDSDR_TIMER		(0xFC0A4033)
+#define MCFGPIO_PPDSDR_LCDDATAH		(0xFC0A4035)
+#define MCFGPIO_PPDSDR_LCDDATAM		(0xFC0A4036)
+#define MCFGPIO_PPDSDR_LCDDATAL		(0xFC0A4037)
+#define MCFGPIO_PPDSDR_LCDCTLH		(0xFC0A4038)
+#define MCFGPIO_PPDSDR_LCDCTLL		(0xFC0A4039)
+#define MCFGPIO_PCLRR_FECH		(0xFC0A403C)
+#define MCFGPIO_PCLRR_FECL		(0xFC0A403D)
+#define MCFGPIO_PCLRR_SSI		(0xFC0A403E)
+#define MCFGPIO_PCLRR_BUSCTL		(0xFC0A403F)
+#define MCFGPIO_PCLRR_BE		(0xFC0A4040)
+#define MCFGPIO_PCLRR_CS		(0xFC0A4041)
+#define MCFGPIO_PCLRR_PWM		(0xFC0A4042)
+#define MCFGPIO_PCLRR_FECI2C		(0xFC0A4043)
+#define MCFGPIO_PCLRR_UART		(0xFC0A4045)
+#define MCFGPIO_PCLRR_QSPI		(0xFC0A4046)
+#define MCFGPIO_PCLRR_TIMER		(0xFC0A4047)
+#define MCFGPIO_PCLRR_LCDDATAH		(0xFC0A4049)
+#define MCFGPIO_PCLRR_LCDDATAM		(0xFC0A404A)
+#define MCFGPIO_PCLRR_LCDDATAL		(0xFC0A404B)
+#define MCFGPIO_PCLRR_LCDCTLH		(0xFC0A404C)
+#define MCFGPIO_PCLRR_LCDCTLL		(0xFC0A404D)
 #define MCF_GPIO_PAR_FEC		MCF_REG08(0xFC0A4050)
 #define MCF_GPIO_PAR_PWM		MCF_REG08(0xFC0A4051)
 #define MCF_GPIO_PAR_BUSCTL		MCF_REG08(0xFC0A4052)
@@ -1187,6 +1187,20 @@
 /* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
 #define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
 
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_FECH
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_FECH
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_FECH
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_FECH
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_FECH
+
+#define MCFGPIO_PIN_MAX			136
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
+
 /*********************************************************************
  *
  * Interrupt Controller (INTC)
@@ -2154,12 +2168,12 @@
  *********************************************************************/
 
 /* Register read/write macros */
-#define MCF_EPORT_EPPAR                MCF_REG16(0xFC094000)
-#define MCF_EPORT_EPDDR                MCF_REG08(0xFC094002)
-#define MCF_EPORT_EPIER                MCF_REG08(0xFC094003)
-#define MCF_EPORT_EPDR                 MCF_REG08(0xFC094004)
-#define MCF_EPORT_EPPDR                MCF_REG08(0xFC094005)
-#define MCF_EPORT_EPFR                 MCF_REG08(0xFC094006)
+#define MCFEPORT_EPPAR                (0xFC094000)
+#define MCFEPORT_EPDDR                (0xFC094002)
+#define MCFEPORT_EPIER                (0xFC094003)
+#define MCFEPORT_EPDR                 (0xFC094004)
+#define MCFEPORT_EPPDR                (0xFC094005)
+#define MCFEPORT_EPFR                 (0xFC094006)
 
 /* Bit definitions and macros for MCF_EPORT_EPPAR */
 #define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
diff --git a/arch/m68knommu/platform/532x/Makefile b/arch/m68knommu/platform/532x/Makefile
index e431912f562..4cc23245bcd 100644
--- a/arch/m68knommu/platform/532x/Makefile
+++ b/arch/m68knommu/platform/532x/Makefile
@@ -15,4 +15,4 @@
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 #obj-y := config.o usb-mcf532x.o spi-mcf532x.o
-obj-y := config.o
+obj-y := config.o gpio.o
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index cdb761971f7..28eb9ea55f4 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -438,8 +438,8 @@ void gpio_init(void)
 	/* Initialize TIN3 as a GPIO output to enable the write
 	   half of the latch */
 	MCF_GPIO_PAR_TIMER = 0x00;
-	MCF_GPIO_PDDR_TIMER = 0x08;
-	MCF_GPIO_PCLRR_TIMER = 0x0;
+	__raw_writeb(0x08, MCFGPIO_PDDR_TIMER);
+	__raw_writeb(0x00, MCFGPIO_PCLRR_TIMER);
 
 }
 
diff --git a/arch/m68knommu/platform/532x/gpio.c b/arch/m68knommu/platform/532x/gpio.c
new file mode 100644
index 00000000000..184b77382c3
--- /dev/null
+++ b/arch/m68knommu/platform/532x/gpio.c
@@ -0,0 +1,337 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PIRQ",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFEPORT_EPDDR,
+		.podr				= MCFEPORT_EPDR,
+		.ppdr				= MCFEPORT_EPPDR,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 8,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECH,
+		.podr				= MCFGPIO_PODR_FECH,
+		.ppdr				= MCFGPIO_PPDSDR_FECH,
+		.setr				= MCFGPIO_PPDSDR_FECH,
+		.clrr				= MCFGPIO_PCLRR_FECH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 16,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_FECL,
+		.podr				= MCFGPIO_PODR_FECL,
+		.ppdr				= MCFGPIO_PPDSDR_FECL,
+		.setr				= MCFGPIO_PPDSDR_FECL,
+		.clrr				= MCFGPIO_PCLRR_FECL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "SSI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 24,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_SSI,
+		.podr				= MCFGPIO_PODR_SSI,
+		.ppdr				= MCFGPIO_PPDSDR_SSI,
+		.setr				= MCFGPIO_PPDSDR_SSI,
+		.clrr				= MCFGPIO_PCLRR_SSI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BUSCTL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 32,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BUSCTL,
+		.podr				= MCFGPIO_PODR_BUSCTL,
+		.ppdr				= MCFGPIO_PPDSDR_BUSCTL,
+		.setr				= MCFGPIO_PPDSDR_BUSCTL,
+		.clrr				= MCFGPIO_PCLRR_BUSCTL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "BE",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 40,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_BE,
+		.podr				= MCFGPIO_PODR_BE,
+		.ppdr				= MCFGPIO_PPDSDR_BE,
+		.setr				= MCFGPIO_PPDSDR_BE,
+		.clrr				= MCFGPIO_PCLRR_BE,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "CS",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 49,
+			.ngpio			= 5,
+		},
+		.pddr				= MCFGPIO_PDDR_CS,
+		.podr				= MCFGPIO_PODR_CS,
+		.ppdr				= MCFGPIO_PPDSDR_CS,
+		.setr				= MCFGPIO_PPDSDR_CS,
+		.clrr				= MCFGPIO_PCLRR_CS,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "PWM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 58,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_PWM,
+		.podr				= MCFGPIO_PODR_PWM,
+		.ppdr				= MCFGPIO_PPDSDR_PWM,
+		.setr				= MCFGPIO_PPDSDR_PWM,
+		.clrr				= MCFGPIO_PCLRR_PWM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "FECI2C",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 64,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_FECI2C,
+		.podr				= MCFGPIO_PODR_FECI2C,
+		.ppdr				= MCFGPIO_PPDSDR_FECI2C,
+		.setr				= MCFGPIO_PPDSDR_FECI2C,
+		.clrr				= MCFGPIO_PCLRR_FECI2C,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "UART",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 72,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_UART,
+		.podr				= MCFGPIO_PODR_UART,
+		.ppdr				= MCFGPIO_PPDSDR_UART,
+		.setr				= MCFGPIO_PPDSDR_UART,
+		.clrr				= MCFGPIO_PCLRR_UART,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "QSPI",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 80,
+			.ngpio			= 6,
+		},
+		.pddr				= MCFGPIO_PDDR_QSPI,
+		.podr				= MCFGPIO_PODR_QSPI,
+		.ppdr				= MCFGPIO_PPDSDR_QSPI,
+		.setr				= MCFGPIO_PPDSDR_QSPI,
+		.clrr				= MCFGPIO_PCLRR_QSPI,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "TIMER",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 88,
+			.ngpio			= 4,
+		},
+		.pddr				= MCFGPIO_PDDR_TIMER,
+		.podr				= MCFGPIO_PODR_TIMER,
+		.ppdr				= MCFGPIO_PPDSDR_TIMER,
+		.setr				= MCFGPIO_PPDSDR_TIMER,
+		.clrr				= MCFGPIO_PCLRR_TIMER,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDDATAH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 96,
+			.ngpio			= 2,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDDATAH,
+		.podr				= MCFGPIO_PODR_LCDDATAH,
+		.ppdr				= MCFGPIO_PPDSDR_LCDDATAH,
+		.setr				= MCFGPIO_PPDSDR_LCDDATAH,
+		.clrr				= MCFGPIO_PCLRR_LCDDATAH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDDATAM",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 104,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDDATAM,
+		.podr				= MCFGPIO_PODR_LCDDATAM,
+		.ppdr				= MCFGPIO_PPDSDR_LCDDATAM,
+		.setr				= MCFGPIO_PPDSDR_LCDDATAM,
+		.clrr				= MCFGPIO_PCLRR_LCDDATAM,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDDATAL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 112,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDDATAL,
+		.podr				= MCFGPIO_PODR_LCDDATAL,
+		.ppdr				= MCFGPIO_PPDSDR_LCDDATAL,
+		.setr				= MCFGPIO_PPDSDR_LCDDATAL,
+		.clrr				= MCFGPIO_PCLRR_LCDDATAL,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDCTLH",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 120,
+			.ngpio			= 1,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDCTLH,
+		.podr				= MCFGPIO_PODR_LCDCTLH,
+		.ppdr				= MCFGPIO_PPDSDR_LCDCTLH,
+		.setr				= MCFGPIO_PPDSDR_LCDCTLH,
+		.clrr				= MCFGPIO_PCLRR_LCDCTLH,
+	},
+	{
+		.gpio_chip			= {
+			.label			= "LCDCTLL",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value_fast,
+			.base			= 128,
+			.ngpio			= 8,
+		},
+		.pddr				= MCFGPIO_PDDR_LCDCTLL,
+		.podr				= MCFGPIO_PODR_LCDCTLL,
+		.ppdr				= MCFGPIO_PPDSDR_LCDCTLL,
+		.setr				= MCFGPIO_PPDSDR_LCDCTLL,
+		.clrr				= MCFGPIO_PCLRR_LCDCTLL,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From dca7cf33bb5c98187ffcc849652b1b2c4c8a0c25 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:11 -0700
Subject: generic GPIO support for the Freescale Coldfire 5407.

Add support for the 5407.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5407sim.h      | 10 +++++--
 arch/m68knommu/platform/5407/Makefile |  2 +-
 arch/m68knommu/platform/5407/gpio.c   | 49 +++++++++++++++++++++++++++++++++++
 3 files changed, 58 insertions(+), 3 deletions(-)
 create mode 100644 arch/m68knommu/platform/5407/gpio.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index cc22c4a5300..25194756b43 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -73,9 +73,15 @@
 #define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
 
-#define	MCFSIM_PADDR		0x244		/* Parallel Direction (r/w) */
-#define	MCFSIM_PADAT		0x248		/* Parallel Data (r/w) */
+#define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
+#define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
 
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX			16
+#define MCFGPIO_IRQ_MAX			-1
+#define MCFGPIO_IRQ_VECBASE		-1
 
 /*
  *	Some symbol defines for the above...
diff --git a/arch/m68knommu/platform/5407/Makefile b/arch/m68knommu/platform/5407/Makefile
index e6035e7a2d3..dee62c5dbaa 100644
--- a/arch/m68knommu/platform/5407/Makefile
+++ b/arch/m68knommu/platform/5407/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o
+obj-y := config.o gpio.o
 
diff --git a/arch/m68knommu/platform/5407/gpio.c b/arch/m68knommu/platform/5407/gpio.c
new file mode 100644
index 00000000000..8da5880e406
--- /dev/null
+++ b/arch/m68knommu/platform/5407/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 16,
+		},
+		.pddr				= MCFSIM_PADDR,
+		.podr				= MCFSIM_PADAT,
+		.ppdr				= MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);
-- 
cgit v1.2.3


From 732c611e5bbb76201397297f834dddd5ab684b05 Mon Sep 17 00:00:00 2001
From: "sfking@fdwdc.com" <sfking@fdwdc.com>
Date: Fri, 19 Jun 2009 18:11:12 -0700
Subject: generic GPIO support misc files.

The definition of MCFSIM_PADDR and MCFSIM_PADAT now has MCF_BAR already added in.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/mcfsmc.h | 6 +++---
 arch/m68k/include/asm/nettel.h | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
index 2d7a4dbd968..527bea5d678 100644
--- a/arch/m68k/include/asm/mcfsmc.h
+++ b/arch/m68k/include/asm/mcfsmc.h
@@ -167,15 +167,15 @@ void smc_remap(unsigned int ioaddr)
 	static int		once = 0;
 	extern unsigned short	ppdata;
 	if (once++ == 0) {
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+		*((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec;
 		ppdata |= 0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
 		outw(0x0001, ioaddr + BANK_SELECT);
 		outw(0x0001, ioaddr + BANK_SELECT);
 		outw(0x0067, ioaddr + BASE);
 
 		ppdata &= ~0x0080;
-		*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
 	}
 	
 	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
index 0299f6a2dee..4dec2d9fb99 100644
--- a/arch/m68k/include/asm/nettel.h
+++ b/arch/m68k/include/asm/nettel.h
@@ -48,14 +48,14 @@ extern volatile unsigned short ppdata;
 static __inline__ unsigned int mcf_getppdata(void)
 {
 	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	pp = (volatile unsigned short *) MCFSIM_PADAT;
 	return((unsigned int) *pp);
 }
 
 static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
 {
 	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+	pp = (volatile unsigned short *) MCFSIM_PADAT;
 	ppdata = (ppdata & ~mask) | bits;
 	*pp = ppdata;
 }
-- 
cgit v1.2.3


From ae0bb3e011fec51fa67073d8e23d8ffeb36185d1 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 19 May 2009 11:07:10 +0300
Subject: KVM: VMX: Properly handle software interrupt re-injection in real
 mode

When reinjecting a software interrupt or exception, use the correct
instruction length provided by the hardware instead of a hardcoded 1.

Fixes problems running the suse 9.1 livecd boot loader.

Problem introduced by commit f0a3602c20 ("KVM: Move interrupt injection
logic to x86.c").

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 29f912927a5..db0b8b6df19 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -801,8 +801,9 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = nr;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
-		if (nr == BP_VECTOR || nr == OF_VECTOR)
-			vmx->rmode.irq.rip++;
+		if (kvm_exception_is_soft(nr))
+			vmx->rmode.irq.rip +=
+				vmx->vcpu.arch.event_exit_inst_len;
 		intr_info |= INTR_TYPE_SOFT_INTR;
 		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
@@ -2468,6 +2469,9 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu)
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = irq;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
+		if (vcpu->arch.interrupt.soft)
+			vmx->rmode.irq.rip +=
+				vmx->vcpu.arch.event_exit_inst_len;
 		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
 			     irq | INTR_TYPE_SOFT_INTR | INTR_INFO_VALID_MASK);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
-- 
cgit v1.2.3


From af24a4e4aec77ef16c1971cf4465f767ba946034 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Fri, 15 May 2009 18:42:05 +0530
Subject: KVM: Replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of
 msr-index.h

Use standard msr-index.h's MSR declaration.

MSR_IA32_TSC is better than MSR_IA32_TIME_STAMP_COUNTER as it also solves
80 column issue.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 2 --
 arch/x86/kvm/svm.c              | 4 ++--
 arch/x86/kvm/vmx.c              | 4 ++--
 arch/x86/kvm/x86.c              | 5 ++---
 4 files changed, 6 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index eabdc1cfab5..79561752af9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -752,8 +752,6 @@ static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
 	kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
 }
 
-#define MSR_IA32_TIME_STAMP_COUNTER		0x010
-
 #define TSS_IOPB_BASE_OFFSET 0x66
 #define TSS_BASE_SIZE 0x68
 #define TSS_IOPB_SIZE (65536 / 8)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b1f658ad2f0..48b22c9892d 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1953,7 +1953,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	switch (ecx) {
-	case MSR_IA32_TIME_STAMP_COUNTER: {
+	case MSR_IA32_TSC: {
 		u64 tsc;
 
 		rdtscll(tsc);
@@ -2043,7 +2043,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	switch (ecx) {
-	case MSR_IA32_TIME_STAMP_COUNTER: {
+	case MSR_IA32_TSC: {
 		u64 tsc;
 
 		rdtscll(tsc);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index db0b8b6df19..c87c93fd129 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -941,7 +941,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	case MSR_EFER:
 		return kvm_get_msr_common(vcpu, msr_index, pdata);
 #endif
-	case MSR_IA32_TIME_STAMP_COUNTER:
+	case MSR_IA32_TSC:
 		data = guest_read_tsc();
 		break;
 	case MSR_IA32_SYSENTER_CS:
@@ -1001,7 +1001,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_SYSENTER_ESP:
 		vmcs_writel(GUEST_SYSENTER_ESP, data);
 		break;
-	case MSR_IA32_TIME_STAMP_COUNTER:
+	case MSR_IA32_TSC:
 		rdtscll(host_tsc);
 		guest_write_tsc(data, host_tsc);
 		break;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3d452901182..6d46079a901 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -466,7 +466,7 @@ static u32 msrs_to_save[] = {
 #ifdef CONFIG_X86_64
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
-	MSR_IA32_TIME_STAMP_COUNTER, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
+	MSR_IA32_TSC, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
 	MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
 };
 
@@ -644,8 +644,7 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 
 	/* Keep irq disabled to prevent changes to the clock */
 	local_irq_save(flags);
-	kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER,
-			  &vcpu->hv_clock.tsc_timestamp);
+	kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
 	ktime_get_ts(&ts);
 	local_irq_restore(flags);
 
-- 
cgit v1.2.3


From 890ca9aefa78f7831f8f633cab9e4803636dffe4 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Mon, 11 May 2009 16:48:15 +0800
Subject: KVM: Add MCE support

The related MSRs are emulated. MCE capability is exported via
extension KVM_CAP_MCE and ioctl KVM_X86_GET_MCE_CAP_SUPPORTED.  A new
vcpu ioctl command KVM_X86_SETUP_MCE is used to setup MCE emulation
such as the mcg_cap. MCE is injected via vcpu ioctl command
KVM_X86_SET_MCE. Extended machine-check state (MCG_EXT_P) and CMCI are
not implemented.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm.h      |   1 +
 arch/x86/include/asm/kvm_host.h |   5 +
 arch/x86/kvm/x86.c              | 220 +++++++++++++++++++++++++++++++++++-----
 3 files changed, 202 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 125be8b1956..708b9c32a5d 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -17,6 +17,7 @@
 #define __KVM_HAVE_USER_NMI
 #define __KVM_HAVE_GUEST_DEBUG
 #define __KVM_HAVE_MSIX
+#define __KVM_HAVE_MCE
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 79561752af9..81c68f630b1 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -373,6 +373,11 @@ struct kvm_vcpu_arch {
 	unsigned long dr6;
 	unsigned long dr7;
 	unsigned long eff_db[KVM_NR_DB_REGS];
+
+	u64 mcg_cap;
+	u64 mcg_status;
+	u64 mcg_ctl;
+	u64 *mce_banks;
 };
 
 struct kvm_mem_alias {
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6d46079a901..55a9dd182de 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -42,6 +42,7 @@
 #include <asm/msr.h>
 #include <asm/desc.h>
 #include <asm/mtrr.h>
+#include <asm/mce.h>
 
 #define MAX_IO_MSRS 256
 #define CR0_RESERVED_BITS						\
@@ -55,6 +56,10 @@
 			  | X86_CR4_OSXMMEXCPT | X86_CR4_VMXE))
 
 #define CR8_RESERVED_BITS (~(unsigned long)X86_CR8_TPR)
+
+#define KVM_MAX_MCE_BANKS 32
+#define KVM_MCE_CAP_SUPPORTED MCG_CTL_P
+
 /* EFER defaults:
  * - enable syscall per default because its emulated by KVM
  * - enable LME and LMA per default on 64 bit KVM
@@ -777,23 +782,43 @@ static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	return 0;
 }
 
-int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+static int set_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
+	u64 mcg_cap = vcpu->arch.mcg_cap;
+	unsigned bank_num = mcg_cap & 0xff;
+
 	switch (msr) {
-	case MSR_EFER:
-		set_efer(vcpu, data);
-		break;
-	case MSR_IA32_MC0_STATUS:
-		pr_unimpl(vcpu, "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n",
-		       __func__, data);
-		break;
 	case MSR_IA32_MCG_STATUS:
-		pr_unimpl(vcpu, "%s: MSR_IA32_MCG_STATUS 0x%llx, nop\n",
-			__func__, data);
+		vcpu->arch.mcg_status = data;
 		break;
 	case MSR_IA32_MCG_CTL:
-		pr_unimpl(vcpu, "%s: MSR_IA32_MCG_CTL 0x%llx, nop\n",
-			__func__, data);
+		if (!(mcg_cap & MCG_CTL_P))
+			return 1;
+		if (data != 0 && data != ~(u64)0)
+			return -1;
+		vcpu->arch.mcg_ctl = data;
+		break;
+	default:
+		if (msr >= MSR_IA32_MC0_CTL &&
+		    msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
+			u32 offset = msr - MSR_IA32_MC0_CTL;
+			/* only 0 or all 1s can be written to IA32_MCi_CTL */
+			if ((offset & 0x3) == 0 &&
+			    data != 0 && data != ~(u64)0)
+				return -1;
+			vcpu->arch.mce_banks[offset] = data;
+			break;
+		}
+		return 1;
+	}
+	return 0;
+}
+
+int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	switch (msr) {
+	case MSR_EFER:
+		set_efer(vcpu, data);
 		break;
 	case MSR_IA32_DEBUGCTLMSR:
 		if (!data) {
@@ -849,6 +874,10 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		kvm_request_guest_time_update(vcpu);
 		break;
 	}
+	case MSR_IA32_MCG_CTL:
+	case MSR_IA32_MCG_STATUS:
+	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
+		return set_msr_mce(vcpu, msr, data);
 	default:
 		pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data);
 		return 1;
@@ -904,26 +933,49 @@ static int get_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	return 0;
 }
 
-int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 {
 	u64 data;
+	u64 mcg_cap = vcpu->arch.mcg_cap;
+	unsigned bank_num = mcg_cap & 0xff;
 
 	switch (msr) {
-	case 0xc0010010: /* SYSCFG */
-	case 0xc0010015: /* HWCR */
-	case MSR_IA32_PLATFORM_ID:
 	case MSR_IA32_P5_MC_ADDR:
 	case MSR_IA32_P5_MC_TYPE:
-	case MSR_IA32_MC0_CTL:
-	case MSR_IA32_MCG_STATUS:
+		data = 0;
+		break;
 	case MSR_IA32_MCG_CAP:
+		data = vcpu->arch.mcg_cap;
+		break;
 	case MSR_IA32_MCG_CTL:
-	case MSR_IA32_MC0_MISC:
-	case MSR_IA32_MC0_MISC+4:
-	case MSR_IA32_MC0_MISC+8:
-	case MSR_IA32_MC0_MISC+12:
-	case MSR_IA32_MC0_MISC+16:
-	case MSR_IA32_MC0_MISC+20:
+		if (!(mcg_cap & MCG_CTL_P))
+			return 1;
+		data = vcpu->arch.mcg_ctl;
+		break;
+	case MSR_IA32_MCG_STATUS:
+		data = vcpu->arch.mcg_status;
+		break;
+	default:
+		if (msr >= MSR_IA32_MC0_CTL &&
+		    msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
+			u32 offset = msr - MSR_IA32_MC0_CTL;
+			data = vcpu->arch.mce_banks[offset];
+			break;
+		}
+		return 1;
+	}
+	*pdata = data;
+	return 0;
+}
+
+int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+	u64 data;
+
+	switch (msr) {
+	case 0xc0010010: /* SYSCFG */
+	case 0xc0010015: /* HWCR */
+	case MSR_IA32_PLATFORM_ID:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
 	case MSR_IA32_DEBUGCTLMSR:
@@ -966,6 +1018,13 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_KVM_SYSTEM_TIME:
 		data = vcpu->arch.time;
 		break;
+	case MSR_IA32_P5_MC_ADDR:
+	case MSR_IA32_P5_MC_TYPE:
+	case MSR_IA32_MCG_CAP:
+	case MSR_IA32_MCG_CTL:
+	case MSR_IA32_MCG_STATUS:
+	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
+		return get_msr_mce(vcpu, msr, pdata);
 	default:
 		pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
 		return 1;
@@ -1087,6 +1146,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IOMMU:
 		r = iommu_found();
 		break;
+	case KVM_CAP_MCE:
+		r = KVM_MAX_MCE_BANKS;
+		break;
 	default:
 		r = 0;
 		break;
@@ -1146,6 +1208,16 @@ long kvm_arch_dev_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
+	case KVM_X86_GET_MCE_CAP_SUPPORTED: {
+		u64 mce_cap;
+
+		mce_cap = KVM_MCE_CAP_SUPPORTED;
+		r = -EFAULT;
+		if (copy_to_user(argp, &mce_cap, sizeof mce_cap))
+			goto out;
+		r = 0;
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -1502,6 +1574,80 @@ static int vcpu_ioctl_tpr_access_reporting(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
+					u64 mcg_cap)
+{
+	int r;
+	unsigned bank_num = mcg_cap & 0xff, bank;
+
+	r = -EINVAL;
+	if (!bank_num)
+		goto out;
+	if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000))
+		goto out;
+	r = 0;
+	vcpu->arch.mcg_cap = mcg_cap;
+	/* Init IA32_MCG_CTL to all 1s */
+	if (mcg_cap & MCG_CTL_P)
+		vcpu->arch.mcg_ctl = ~(u64)0;
+	/* Init IA32_MCi_CTL to all 1s */
+	for (bank = 0; bank < bank_num; bank++)
+		vcpu->arch.mce_banks[bank*4] = ~(u64)0;
+out:
+	return r;
+}
+
+static int kvm_vcpu_ioctl_x86_set_mce(struct kvm_vcpu *vcpu,
+				      struct kvm_x86_mce *mce)
+{
+	u64 mcg_cap = vcpu->arch.mcg_cap;
+	unsigned bank_num = mcg_cap & 0xff;
+	u64 *banks = vcpu->arch.mce_banks;
+
+	if (mce->bank >= bank_num || !(mce->status & MCI_STATUS_VAL))
+		return -EINVAL;
+	/*
+	 * if IA32_MCG_CTL is not all 1s, the uncorrected error
+	 * reporting is disabled
+	 */
+	if ((mce->status & MCI_STATUS_UC) && (mcg_cap & MCG_CTL_P) &&
+	    vcpu->arch.mcg_ctl != ~(u64)0)
+		return 0;
+	banks += 4 * mce->bank;
+	/*
+	 * if IA32_MCi_CTL is not all 1s, the uncorrected error
+	 * reporting is disabled for the bank
+	 */
+	if ((mce->status & MCI_STATUS_UC) && banks[0] != ~(u64)0)
+		return 0;
+	if (mce->status & MCI_STATUS_UC) {
+		if ((vcpu->arch.mcg_status & MCG_STATUS_MCIP) ||
+		    !(vcpu->arch.cr4 & X86_CR4_MCE)) {
+			printk(KERN_DEBUG "kvm: set_mce: "
+			       "injects mce exception while "
+			       "previous one is in progress!\n");
+			set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+			return 0;
+		}
+		if (banks[1] & MCI_STATUS_VAL)
+			mce->status |= MCI_STATUS_OVER;
+		banks[2] = mce->addr;
+		banks[3] = mce->misc;
+		vcpu->arch.mcg_status = mce->mcg_status;
+		banks[1] = mce->status;
+		kvm_queue_exception(vcpu, MC_VECTOR);
+	} else if (!(banks[1] & MCI_STATUS_VAL)
+		   || !(banks[1] & MCI_STATUS_UC)) {
+		if (banks[1] & MCI_STATUS_VAL)
+			mce->status |= MCI_STATUS_OVER;
+		banks[2] = mce->addr;
+		banks[3] = mce->misc;
+		banks[1] = mce->status;
+	} else
+		banks[1] |= MCI_STATUS_OVER;
+	return 0;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
@@ -1635,6 +1781,24 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		kvm_lapic_set_vapic_addr(vcpu, va.vapic_addr);
 		break;
 	}
+	case KVM_X86_SETUP_MCE: {
+		u64 mcg_cap;
+
+		r = -EFAULT;
+		if (copy_from_user(&mcg_cap, argp, sizeof mcg_cap))
+			goto out;
+		r = kvm_vcpu_ioctl_x86_setup_mce(vcpu, mcg_cap);
+		break;
+	}
+	case KVM_X86_SET_MCE: {
+		struct kvm_x86_mce mce;
+
+		r = -EFAULT;
+		if (copy_from_user(&mce, argp, sizeof mce))
+			goto out;
+		r = kvm_vcpu_ioctl_x86_set_mce(vcpu, &mce);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -4440,6 +4604,14 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 			goto fail_mmu_destroy;
 	}
 
+	vcpu->arch.mce_banks = kzalloc(KVM_MAX_MCE_BANKS * sizeof(u64) * 4,
+				       GFP_KERNEL);
+	if (!vcpu->arch.mce_banks) {
+		r = -ENOMEM;
+		goto fail_mmu_destroy;
+	}
+	vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
+
 	return 0;
 
 fail_mmu_destroy:
-- 
cgit v1.2.3


From 60af2ecdc53af5b941e4a2eb99862a7ccf3ed7c8 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Thu, 14 May 2009 11:00:10 +0530
Subject: KVM: Use MSR names in place of address

Replace 0xc0010010 with MSR_K8_SYSCFG and 0xc0010015 with MSR_K7_HWCR.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 55a9dd182de..a93ba37eb52 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -973,8 +973,6 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	u64 data;
 
 	switch (msr) {
-	case 0xc0010010: /* SYSCFG */
-	case 0xc0010015: /* HWCR */
 	case MSR_IA32_PLATFORM_ID:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
@@ -983,6 +981,8 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_LASTBRANCHTOIP:
 	case MSR_IA32_LASTINTFROMIP:
 	case MSR_IA32_LASTINTTOIP:
+	case MSR_K8_SYSCFG:
+	case MSR_K7_HWCR:
 	case MSR_VM_HSAVE_PA:
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
-- 
cgit v1.2.3


From cb007648de83cf226d69ec76e1c01848b4e8e49f Mon Sep 17 00:00:00 2001
From: Mark McLoughlin <markmc@redhat.com>
Date: Tue, 12 May 2009 12:36:44 +0100
Subject: KVM: fix cpuid E2BIG handling for extended request types

If we run out of cpuid entries for extended request types
we should return -E2BIG, just like we do for the standard
request types.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a93ba37eb52..25a1c5739df 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1506,6 +1506,10 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 	for (func = 0x80000001; func <= limit && nent < cpuid->nent; ++func)
 		do_cpuid_ent(&cpuid_entries[nent], func, 0,
 			     &nent, cpuid->nent);
+	r = -E2BIG;
+	if (nent >= cpuid->nent)
+		goto out_free;
+
 	r = -EFAULT;
 	if (copy_to_user(entries, cpuid_entries,
 			 nent * sizeof(struct kvm_cpuid_entry2)))
-- 
cgit v1.2.3


From c9eaf20f268c7051bfde2ba212c5ea76a6cbc7a1 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 18 May 2009 16:13:45 +0300
Subject: KVM: x86 emulator: Implement zero-extended immediate decoding

Absolute jumps use zero extended immediate operands.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 616de4628d6..a30d5fc17ee 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -60,6 +60,7 @@
 #define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
 #define SrcOne      (7<<4)	/* Implied '1' */
 #define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
+#define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
 #define SrcMask     (0xf<<4)
 /* Generic ModRM decode. */
 #define ModRM       (1<<8)
@@ -1027,6 +1028,7 @@ done_prefixes:
 		c->src.type = OP_MEM;
 		break;
 	case SrcImm:
+	case SrcImmU:
 		c->src.type = OP_IMM;
 		c->src.ptr = (unsigned long *)c->eip;
 		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
@@ -1044,6 +1046,19 @@ done_prefixes:
 			c->src.val = insn_fetch(s32, 4, c->eip);
 			break;
 		}
+		if ((c->d & SrcMask) == SrcImmU) {
+			switch (c->src.bytes) {
+			case 1:
+				c->src.val &= 0xff;
+				break;
+			case 2:
+				c->src.val &= 0xffff;
+				break;
+			case 4:
+				c->src.val &= 0xffffffff;
+				break;
+			}
+		}
 		break;
 	case SrcImmByte:
 	case SrcImmUByte:
-- 
cgit v1.2.3


From ee3d29e8bee8d7c321279a9bd9bd25d4cfbf79b7 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 18 May 2009 16:15:20 +0300
Subject: KVM: x86 emulator: fix jmp far decoding (opcode 0xea)

The jump target should not be sign extened; use an unsigned decode flag.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index a30d5fc17ee..ef4dfca3ed7 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -196,7 +196,7 @@ static u32 opcode_table[256] = {
 	ByteOp | SrcImmUByte, SrcImmUByte,
 	/* 0xE8 - 0xEF */
 	SrcImm | Stack, SrcImm | ImplicitOps,
-	SrcImm | Src2Imm16, SrcImmByte | ImplicitOps,
+	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	/* 0xF0 - 0xF7 */
-- 
cgit v1.2.3


From 284e9b0f5ad0c049efb7f145588782bf3d8be93e Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Mon, 18 May 2009 08:16:14 -0400
Subject: KVM: cleanup arch/x86/kvm/Makefile

Use proper foo-y style list additions to cleanup all the conditionals,
move module selection after compound object selection and remove the
superflous comment.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/Makefile | 32 +++++++++++++-------------------
 1 file changed, 13 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index b43c4efafe8..bee9512cd60 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -1,22 +1,16 @@
-#
-# Makefile for Kernel-based Virtual Machine module
-#
-
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-                coalesced_mmio.o irq_comm.o)
-ifeq ($(CONFIG_KVM_TRACE),y)
-common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
-endif
-ifeq ($(CONFIG_IOMMU_API),y)
-common-objs += $(addprefix ../../../virt/kvm/, iommu.o)
-endif
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
-kvm-objs := $(common-objs) x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
-	i8254.o timer.o
-obj-$(CONFIG_KVM) += kvm.o
-kvm-intel-objs = vmx.o
-obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
-kvm-amd-objs = svm.o
-obj-$(CONFIG_KVM_AMD) += kvm-amd.o
+kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+				coalesced_mmio.o irq_comm.o)
+kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
+kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
+
+kvm-y			+= x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
+			   i8254.o timer.o
+kvm-intel-y		+= vmx.o
+kvm-amd-y		+= svm.o
+
+obj-$(CONFIG_KVM)	+= kvm.o
+obj-$(CONFIG_KVM_INTEL)	+= kvm-intel.o
+obj-$(CONFIG_KVM_AMD)	+= kvm-amd.o
-- 
cgit v1.2.3


From 787ff73637bbf34ef276cb04a127b421de71cc43 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Mon, 18 May 2009 11:44:06 +0300
Subject: KVM: Drop interrupt shadow when single stepping should be done only
 on VMX

The problem exists only on VMX. Also currently we skip this step if
there is pending exception. The patch fixes this too.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 8 ++++++++
 arch/x86/kvm/x86.c | 3 ---
 2 files changed, 8 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c87c93fd129..c14bffc8c1f 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3453,6 +3453,14 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	if (test_bit(VCPU_REGS_RIP, (unsigned long *)&vcpu->arch.regs_dirty))
 		vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
 
+	/* When single-stepping over STI and MOV SS, we must clear the
+	 * corresponding interruptibility bits in the guest state. Otherwise
+	 * vmentry fails as it then expects bit 14 (BS) in pending debug
+	 * exceptions being set, but that's not correct for the guest debugging
+	 * case. */
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		vmx_set_interrupt_shadow(vcpu, 0);
+
 	/*
 	 * Loading guest fpu may have cleared host cr0.ts
 	 */
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 25a1c5739df..f0642396783 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3361,9 +3361,6 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 
 static void inject_pending_irq(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		kvm_x86_ops->set_interrupt_shadow(vcpu, 0);
-
 	/* try to reinject previous events if any */
 	if (vcpu->arch.nmi_injected) {
 		kvm_x86_ops->set_nmi(vcpu);
-- 
cgit v1.2.3


From 0ba12d10817a8db1fd7d96d3283ec6c0b294aeab Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 21 May 2009 16:45:19 +0300
Subject: KVM: Move common KVM Kconfig items to new file virt/kvm/Kconfig

Reduce Kconfig code duplication.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/Kconfig    | 7 ++-----
 arch/powerpc/kvm/Kconfig | 3 +--
 arch/s390/kvm/Kconfig    | 6 +-----
 arch/x86/kvm/Kconfig     | 7 ++-----
 4 files changed, 6 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index 64d52093787..f922bbba379 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -1,12 +1,8 @@
 #
 # KVM configuration
 #
-config HAVE_KVM
-	bool
 
-config HAVE_KVM_IRQCHIP
-       bool
-       default y
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
@@ -28,6 +24,7 @@ config KVM
 	depends on PCI
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select HAVE_KVM_IRQCHIP
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 5a152a52796..46019dccce1 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -2,8 +2,7 @@
 # KVM configuration
 #
 
-config HAVE_KVM_IRQCHIP
-       bool
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 3e260b7e37b..ad75ce33be1 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -1,11 +1,7 @@
 #
 # KVM configuration
 #
-config HAVE_KVM
-       bool
-
-config HAVE_KVM_IRQCHIP
-       bool
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8600a09e0c6..939b1cb9c5b 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -1,12 +1,8 @@
 #
 # KVM configuration
 #
-config HAVE_KVM
-       bool
 
-config HAVE_KVM_IRQCHIP
-       bool
-       default y
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
@@ -29,6 +25,7 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select MMU_NOTIFIER
 	select ANON_INODES
+	select HAVE_KVM_IRQCHIP
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
-- 
cgit v1.2.3


From 721eecbf4fe995ca94a9edec0c9843b1cc0eaaf3 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Wed, 20 May 2009 10:30:49 -0400
Subject: KVM: irqfd

KVM provides a complete virtual system environment for guests, including
support for injecting interrupts modeled after the real exception/interrupt
facilities present on the native platform (such as the IDT on x86).
Virtual interrupts can come from a variety of sources (emulated devices,
pass-through devices, etc) but all must be injected to the guest via
the KVM infrastructure.  This patch adds a new mechanism to inject a specific
interrupt to a guest using a decoupled eventfd mechnanism:  Any legal signal
on the irqfd (using eventfd semantics from either userspace or kernel) will
translate into an injected interrupt in the guest at the next available
interrupt window.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/Kconfig  | 1 +
 arch/x86/kvm/Makefile | 2 +-
 arch/x86/kvm/x86.c    | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 939b1cb9c5b..8cd2a4efe23 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -26,6 +26,7 @@ config KVM
 	select MMU_NOTIFIER
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
+	select HAVE_KVM_EVENTFD
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index bee9512cd60..01e3c61f749 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -2,7 +2,7 @@
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-				coalesced_mmio.o irq_comm.o)
+				coalesced_mmio.o irq_comm.o eventfd.o)
 kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f0642396783..15f39fc08ec 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1126,6 +1126,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_REINJECT_CONTROL:
 	case KVM_CAP_IRQ_INJECT_STATUS:
 	case KVM_CAP_ASSIGN_DEV_IRQ:
+	case KVM_CAP_IRQFD:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
-- 
cgit v1.2.3


From c5ff41ce66382d657a76bc06ba252d848826950f Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Thu, 14 May 2009 22:42:53 +0200
Subject: KVM: Allow PIT emulation without speaker port

The in-kernel speaker emulation is only a dummy and also unneeded from
the performance point of view. Rather, it takes user space support to
generate sound output on the host, e.g. console beeps.

To allow this, introduce KVM_CREATE_PIT2 which controls in-kernel
speaker port emulation via a flag passed along the new IOCTL. It also
leaves room for future extensions of the PIT configuration interface.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 14 ++++++++------
 arch/x86/kvm/i8254.h |  2 +-
 arch/x86/kvm/x86.c   | 12 +++++++++++-
 3 files changed, 20 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 21f68e00524..0990bc9aac1 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -563,7 +563,7 @@ static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 	}
 }
 
-struct kvm_pit *kvm_create_pit(struct kvm *kvm)
+struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
 	struct kvm_kpit_state *pit_state;
@@ -589,11 +589,13 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 	pit->dev.private = pit;
 	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
 
-	pit->speaker_dev.read = speaker_ioport_read;
-	pit->speaker_dev.write = speaker_ioport_write;
-	pit->speaker_dev.in_range = speaker_in_range;
-	pit->speaker_dev.private = pit;
-	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+	if (flags & KVM_PIT_SPEAKER_DUMMY) {
+		pit->speaker_dev.read = speaker_ioport_read;
+		pit->speaker_dev.write = speaker_ioport_write;
+		pit->speaker_dev.in_range = speaker_in_range;
+		pit->speaker_dev.private = pit;
+		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+	}
 
 	kvm->arch.vpit = pit;
 	pit->kvm = kvm;
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index bbd863ff60b..b2670180f22 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -50,7 +50,7 @@ struct kvm_pit {
 
 void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu);
 void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val);
-struct kvm_pit *kvm_create_pit(struct kvm *kvm);
+struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags);
 void kvm_free_pit(struct kvm *kvm);
 void kvm_pit_reset(struct kvm_pit *pit);
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 15f39fc08ec..5eb3b8dd74b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1127,6 +1127,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IRQ_INJECT_STATUS:
 	case KVM_CAP_ASSIGN_DEV_IRQ:
 	case KVM_CAP_IRQFD:
+	case KVM_CAP_PIT2:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -2038,6 +2039,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	union {
 		struct kvm_pit_state ps;
 		struct kvm_memory_alias alias;
+		struct kvm_pit_config pit_config;
 	} u;
 
 	switch (ioctl) {
@@ -2098,12 +2100,20 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		}
 		break;
 	case KVM_CREATE_PIT:
+		u.pit_config.flags = KVM_PIT_SPEAKER_DUMMY;
+		goto create_pit;
+	case KVM_CREATE_PIT2:
+		r = -EFAULT;
+		if (copy_from_user(&u.pit_config, argp,
+				   sizeof(struct kvm_pit_config)))
+			goto out;
+	create_pit:
 		mutex_lock(&kvm->lock);
 		r = -EEXIST;
 		if (kvm->arch.vpit)
 			goto create_pit_unlock;
 		r = -ENOMEM;
-		kvm->arch.vpit = kvm_create_pit(kvm);
+		kvm->arch.vpit = kvm_create_pit(kvm, u.pit_config.flags);
 		if (kvm->arch.vpit)
 			r = 0;
 	create_pit_unlock:
-- 
cgit v1.2.3


From 3032b925f00ba2653f7695d356d6f8284c82038d Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Mon, 25 May 2009 10:22:17 +0200
Subject: KVM: ia64: Correct itc_offset calculations

Init the itc_offset for all possible vCPUs. The current code by
mistake ends up only initializing the offset on vCPU 0.

Spotted by Gleb Natapov.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 80c57b0a21c..319922137fd 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1224,7 +1224,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 		/*Initialize itc offset for vcpus*/
 		itc_offset = 0UL - kvm_get_itc(vcpu);
-		for (i = 0; i < kvm->arch.online_vcpus; i++) {
+		for (i = 0; i < KVM_MAX_VCPUS; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
 			v->arch.itc_offset = itc_offset;
-- 
cgit v1.2.3


From 9ace903d171db7dc2fed96e44ac62b6f4c3ccb3d Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Wed, 20 May 2009 15:34:55 +0200
Subject: KVM: s390: infrastructure to kick vcpus out of guest state

To ensure vcpu's come out of guest context in certain cases this patch adds a
s390 specific way to kick them out of guest context. Currently it kicks them
out to rerun the vcpu_run path in the s390 code, but the mechanism itself is
expandable and with a new flag we could also add e.g. kicks to userspace etc.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/include/asm/kvm_host.h |  5 ++--
 arch/s390/kvm/intercept.c        | 12 ++++++---
 arch/s390/kvm/kvm-s390.c         |  5 ++++
 arch/s390/kvm/kvm-s390.h         |  3 +++
 arch/s390/kvm/sigp.c             | 56 ++++++++++++++++++++++++----------------
 5 files changed, 54 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 1cd02f6073a..0a784f6f9c9 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -182,8 +182,9 @@ struct kvm_s390_interrupt_info {
 };
 
 /* for local_interrupt.action_flags */
-#define ACTION_STORE_ON_STOP 1
-#define ACTION_STOP_ON_STOP  2
+#define ACTION_STORE_ON_STOP		(1<<0)
+#define ACTION_STOP_ON_STOP		(1<<1)
+#define ACTION_RELOADVCPU_ON_STOP	(1<<2)
 
 struct kvm_s390_local_interrupt {
 	spinlock_t lock;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 98997ccba50..0732ab4305f 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -128,7 +128,7 @@ static int handle_noop(struct kvm_vcpu *vcpu)
 
 static int handle_stop(struct kvm_vcpu *vcpu)
 {
-	int rc;
+	int rc = 0;
 
 	vcpu->stat.exit_stop_request++;
 	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
@@ -141,12 +141,18 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 			rc = -ENOTSUPP;
 	}
 
+	if (vcpu->arch.local_int.action_bits & ACTION_RELOADVCPU_ON_STOP) {
+		vcpu->arch.local_int.action_bits &= ~ACTION_RELOADVCPU_ON_STOP;
+		rc = SIE_INTERCEPT_RERUNVCPU;
+		vcpu->run->exit_reason = KVM_EXIT_INTR;
+	}
+
 	if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
 		VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
 		rc = -ENOTSUPP;
-	} else
-		rc = 0;
+	}
+
 	spin_unlock_bh(&vcpu->arch.local_int.lock);
 	return rc;
 }
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 90d9d1ba258..1d65f627716 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -490,6 +490,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	vcpu_load(vcpu);
 
+rerun_vcpu:
 	/* verify, that memory has been registered */
 	if (!vcpu->kvm->arch.guest_memsize) {
 		vcpu_put(vcpu);
@@ -509,6 +510,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		vcpu->arch.sie_block->gpsw.addr = kvm_run->s390_sieic.addr;
 		break;
 	case KVM_EXIT_UNKNOWN:
+	case KVM_EXIT_INTR:
 	case KVM_EXIT_S390_RESET:
 		break;
 	default:
@@ -522,6 +524,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		rc = kvm_handle_sie_intercept(vcpu);
 	} while (!signal_pending(current) && !rc);
 
+	if (rc == SIE_INTERCEPT_RERUNVCPU)
+		goto rerun_vcpu;
+
 	if (signal_pending(current) && !rc)
 		rc = -EINTR;
 
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 748fee87232..2072cd4a013 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -20,6 +20,8 @@
 
 typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
+/* negativ values are error codes, positive values for internal conditions */
+#define SIE_INTERCEPT_RERUNVCPU		(1<<0)
 int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu);
 
 #define VM_EVENT(d_kvm, d_loglevel, d_string, d_args...)\
@@ -50,6 +52,7 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 		struct kvm_s390_interrupt *s390int);
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
+int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
 
 /* implemented in priv.c */
 int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 0ef81d6776e..21897b0f8a3 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -1,7 +1,7 @@
 /*
  * sigp.c - handlinge interprocessor communication
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -9,6 +9,7 @@
  *
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *               Christian Borntraeger <borntraeger@de.ibm.com>
+ *               Christian Ehrhardt <ehrhardt@de.ibm.com>
  */
 
 #include <linux/kvm.h>
@@ -107,46 +108,57 @@ unlock:
 	return rc;
 }
 
-static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
+static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action)
 {
-	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct kvm_s390_local_interrupt *li;
 	struct kvm_s390_interrupt_info *inti;
-	int rc;
-
-	if (cpu_addr >= KVM_MAX_VCPUS)
-		return 3; /* not operational */
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
 		return -ENOMEM;
-
 	inti->type = KVM_S390_SIGP_STOP;
 
-	spin_lock(&fi->lock);
-	li = fi->local_int[cpu_addr];
-	if (li == NULL) {
-		rc = 3; /* not operational */
-		kfree(inti);
-		goto unlock;
-	}
 	spin_lock_bh(&li->lock);
 	list_add_tail(&inti->list, &li->list);
 	atomic_set(&li->active, 1);
 	atomic_set_mask(CPUSTAT_STOP_INT, li->cpuflags);
-	if (store)
-		li->action_bits |= ACTION_STORE_ON_STOP;
-	li->action_bits |= ACTION_STOP_ON_STOP;
+	li->action_bits |= action;
 	if (waitqueue_active(&li->wq))
 		wake_up_interruptible(&li->wq);
 	spin_unlock_bh(&li->lock);
-	rc = 0; /* order accepted */
+
+	return 0; /* order accepted */
+}
+
+static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int action)
+{
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	int rc;
+
+	if (cpu_addr >= KVM_MAX_VCPUS)
+		return 3; /* not operational */
+
+	spin_lock(&fi->lock);
+	li = fi->local_int[cpu_addr];
+	if (li == NULL) {
+		rc = 3; /* not operational */
+		goto unlock;
+	}
+
+	rc = __inject_sigp_stop(li, action);
+
 unlock:
 	spin_unlock(&fi->lock);
 	VCPU_EVENT(vcpu, 4, "sent sigp stop to cpu %x", cpu_addr);
 	return rc;
 }
 
+int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action)
+{
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	return __inject_sigp_stop(li, action);
+}
+
 static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 {
 	int rc;
@@ -262,11 +274,11 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 		break;
 	case SIGP_STOP:
 		vcpu->stat.instruction_sigp_stop++;
-		rc = __sigp_stop(vcpu, cpu_addr, 0);
+		rc = __sigp_stop(vcpu, cpu_addr, ACTION_STOP_ON_STOP);
 		break;
 	case SIGP_STOP_STORE_STATUS:
 		vcpu->stat.instruction_sigp_stop++;
-		rc = __sigp_stop(vcpu, cpu_addr, 1);
+		rc = __sigp_stop(vcpu, cpu_addr, ACTION_STORE_ON_STOP);
 		break;
 	case SIGP_SET_ARCH:
 		vcpu->stat.instruction_sigp_arch++;
-- 
cgit v1.2.3


From b1d16c495d9e6fe48e7df2e1d18cafc6555a116a Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Wed, 20 May 2009 15:34:56 +0200
Subject: KVM: s390: fix signal handling

If signal pending is true we exit without updating kvm_run, userspace
currently just does nothing and jumps to kvm_run again.
Since we did not set an exit_reason we might end up with a random one
(whatever was the last exit). Therefore it was possible to e.g. jump to
the psw position the last real interruption set.
Setting the INTR exit reason ensures that no old psw data is swapped
in on reentry.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/kvm/kvm-s390.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 1d65f627716..5c1c3025900 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -527,8 +527,10 @@ rerun_vcpu:
 	if (rc == SIE_INTERCEPT_RERUNVCPU)
 		goto rerun_vcpu;
 
-	if (signal_pending(current) && !rc)
+	if (signal_pending(current) && !rc) {
+		kvm_run->exit_reason = KVM_EXIT_INTR;
 		rc = -EINTR;
+	}
 
 	if (rc == -ENOTSUPP) {
 		/* intercept cannot be handled in-kernel, prepare kvm-run */
-- 
cgit v1.2.3


From 628eb9b8a8f3ef31d8316112a4596b1a21b38159 Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Mon, 25 May 2009 13:40:51 +0200
Subject: KVM: s390: streamline memslot handling

This patch relocates the variables kvm-s390 uses to track guest mem addr/size.
As discussed dropping the variables at struct kvm_arch level allows to use the
common vcpu->request based mechanism to reload guest memory if e.g. changes
via set_memory_region.

The kick mechanism introduced in this series is used to ensure running vcpus
leave guest state to catch the update.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/include/asm/kvm_host.h |  4 +---
 arch/s390/kvm/gaccess.h          | 23 +++++++++---------
 arch/s390/kvm/intercept.c        |  6 ++---
 arch/s390/kvm/kvm-s390.c         | 50 +++++++++++++---------------------------
 arch/s390/kvm/kvm-s390.h         | 29 ++++++++++++++++++++++-
 arch/s390/kvm/sigp.c             |  4 ++--
 6 files changed, 62 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 0a784f6f9c9..75535d4d7a0 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -1,7 +1,7 @@
 /*
  * asm-s390/kvm_host.h - definition for kernel virtual machines on s390
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -228,8 +228,6 @@ struct kvm_vm_stat {
 };
 
 struct kvm_arch{
-	unsigned long guest_origin;
-	unsigned long guest_memsize;
 	struct sca_block *sca;
 	debug_info_t *dbf;
 	struct kvm_s390_float_interrupt float_int;
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index ed60f3a74a8..03c716a0f01 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -1,7 +1,7 @@
 /*
  * gaccess.h -  access guest memory
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -16,13 +16,14 @@
 #include <linux/compiler.h>
 #include <linux/kvm_host.h>
 #include <asm/uaccess.h>
+#include "kvm-s390.h"
 
 static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
 					       unsigned long guestaddr)
 {
 	unsigned long prefix  = vcpu->arch.sie_block->prefix;
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if (guestaddr < 2 * PAGE_SIZE)
 		guestaddr += prefix;
@@ -158,8 +159,8 @@ static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest,
 				const void *from, unsigned long n)
 {
 	unsigned long prefix  = vcpu->arch.sie_block->prefix;
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -209,8 +210,8 @@ static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to,
 				  unsigned long guestsrc, unsigned long n)
 {
 	unsigned long prefix  = vcpu->arch.sie_block->prefix;
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -244,8 +245,8 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu,
 					 unsigned long guestdest,
 					 const void *from, unsigned long n)
 {
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if (guestdest + n > memsize)
 		return -EFAULT;
@@ -262,8 +263,8 @@ static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to,
 					   unsigned long guestsrc,
 					   unsigned long n)
 {
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if (guestsrc + n > memsize)
 		return -EFAULT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 0732ab4305f..ba9d8a7bc1a 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -1,7 +1,7 @@
 /*
  * intercept.c - in-kernel handling for sie intercepts
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -164,9 +164,9 @@ static int handle_validity(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.exit_validity++;
 	if ((viwhy == 0x37) && (vcpu->arch.sie_block->prefix
-		<= vcpu->kvm->arch.guest_memsize - 2*PAGE_SIZE)){
+		<= kvm_s390_vcpu_get_memsize(vcpu) - 2*PAGE_SIZE)) {
 		rc = fault_in_pages_writeable((char __user *)
-			 vcpu->kvm->arch.guest_origin +
+			 vcpu->arch.sie_block->gmsor +
 			 vcpu->arch.sie_block->prefix,
 			 2*PAGE_SIZE);
 		if (rc)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 5c1c3025900..098bfa6fbdf 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1,7 +1,7 @@
 /*
  * s390host.c --  hosting zSeries kernel virtual machines
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -10,6 +10,7 @@
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *               Christian Borntraeger <borntraeger@de.ibm.com>
  *               Heiko Carstens <heiko.carstens@de.ibm.com>
+ *               Christian Ehrhardt <ehrhardt@de.ibm.com>
  */
 
 #include <linux/compiler.h>
@@ -278,16 +279,10 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gbea = 1;
 }
 
-/* The current code can have up to 256 pages for virtio */
-#define VIRTIODESCSPACE (256ul * 4096ul)
-
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
-	vcpu->arch.sie_block->gmslm = vcpu->kvm->arch.guest_memsize +
-				      vcpu->kvm->arch.guest_origin +
-				      VIRTIODESCSPACE - 1ul;
-	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
+	set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests);
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
@@ -491,9 +486,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	vcpu_load(vcpu);
 
 rerun_vcpu:
+	if (vcpu->requests)
+		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
+			kvm_s390_vcpu_set_mem(vcpu);
+
 	/* verify, that memory has been registered */
-	if (!vcpu->kvm->arch.guest_memsize) {
+	if (!vcpu->arch.sie_block->gmslm) {
 		vcpu_put(vcpu);
+		VCPU_EVENT(vcpu, 3, "%s", "no memory registered to run vcpu");
 		return -EINVAL;
 	}
 
@@ -691,7 +691,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	   vmas. It is okay to mmap() and munmap() stuff in this slot after
 	   doing this call at any time */
 
-	if (mem->slot || kvm->arch.guest_memsize)
+	if (mem->slot)
 		return -EINVAL;
 
 	if (mem->guest_phys_addr)
@@ -706,36 +706,18 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	if (!user_alloc)
 		return -EINVAL;
 
-	/* lock all vcpus */
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (!kvm->vcpus[i])
-			continue;
-		if (!mutex_trylock(&kvm->vcpus[i]->mutex))
-			goto fail_out;
-	}
-
-	kvm->arch.guest_origin = mem->userspace_addr;
-	kvm->arch.guest_memsize = mem->memory_size;
-
-	/* update sie control blocks, and unlock all vcpus */
+	/* request update of sie control block for all available vcpus */
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
-			kvm->vcpus[i]->arch.sie_block->gmsor =
-				kvm->arch.guest_origin;
-			kvm->vcpus[i]->arch.sie_block->gmslm =
-				kvm->arch.guest_memsize +
-				kvm->arch.guest_origin +
-				VIRTIODESCSPACE - 1ul;
-			mutex_unlock(&kvm->vcpus[i]->mutex);
+			if (test_and_set_bit(KVM_REQ_MMU_RELOAD,
+						&kvm->vcpus[i]->requests))
+				continue;
+			kvm_s390_inject_sigp_stop(kvm->vcpus[i],
+						  ACTION_RELOADVCPU_ON_STOP);
 		}
 	}
 
 	return 0;
-
-fail_out:
-	for (; i >= 0; i--)
-		mutex_unlock(&kvm->vcpus[i]->mutex);
-	return -EINVAL;
 }
 
 void kvm_arch_flush_shadow(struct kvm *kvm)
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 2072cd4a013..ec5eee7c25d 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -1,7 +1,7 @@
 /*
  * kvm_s390.h -  definition for kvm on s390
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -9,6 +9,7 @@
  *
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *               Christian Borntraeger <borntraeger@de.ibm.com>
+ *               Christian Ehrhardt <ehrhardt@de.ibm.com>
  */
 
 #ifndef ARCH_S390_KVM_S390_H
@@ -18,6 +19,9 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 
+/* The current code can have up to 256 pages for virtio */
+#define VIRTIODESCSPACE (256ul * 4096ul)
+
 typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
 /* negativ values are error codes, positive values for internal conditions */
@@ -54,6 +58,29 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
 int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
 
+static inline int kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.sie_block->gmslm
+		- vcpu->arch.sie_block->gmsor
+		- VIRTIODESCSPACE + 1ul;
+}
+
+static inline void kvm_s390_vcpu_set_mem(struct kvm_vcpu *vcpu)
+{
+	struct kvm_memory_slot *mem;
+
+	down_read(&vcpu->kvm->slots_lock);
+	mem = &vcpu->kvm->memslots[0];
+
+	vcpu->arch.sie_block->gmsor = mem->userspace_addr;
+	vcpu->arch.sie_block->gmslm =
+		mem->userspace_addr +
+		(mem->npages << PAGE_SHIFT) +
+		VIRTIODESCSPACE - 1ul;
+
+	up_read(&vcpu->kvm->slots_lock);
+}
+
 /* implemented in priv.c */
 int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 21897b0f8a3..40c8c6748cf 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -189,9 +189,9 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 	/* make sure that the new value is valid memory */
 	address = address & 0x7fffe000u;
 	if ((copy_from_guest(vcpu, &tmp,
-		(u64) (address + vcpu->kvm->arch.guest_origin) , 1)) ||
+		(u64) (address + vcpu->arch.sie_block->gmsor) , 1)) ||
 	   (copy_from_guest(vcpu, &tmp, (u64) (address +
-			vcpu->kvm->arch.guest_origin + PAGE_SIZE), 1))) {
+			vcpu->arch.sie_block->gmsor + PAGE_SIZE), 1))) {
 		*reg |= SIGP_STAT_INVALID_PARAMETER;
 		return 1; /* invalid parameter */
 	}
-- 
cgit v1.2.3


From 017cb99e875f2d8ff375cbb576c794b081cd0bd5 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 28 May 2009 11:56:31 +0200
Subject: KVM: SVM: use explicit 64bit storage for sysenter values

Since AMD does not support sysenter in 64bit mode, the VMCB fields storing
the MSRs are truncated to 32bit upon VMRUN/#VMEXIT. So store the values
in a separate 64bit storage to avoid truncation.

[andre: fix amd->amd migration]

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/kvm_svm.h | 2 ++
 arch/x86/kvm/svm.c     | 8 ++++----
 2 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
index ed66e4c078d..6f275b4cf62 100644
--- a/arch/x86/kvm/kvm_svm.h
+++ b/arch/x86/kvm/kvm_svm.h
@@ -27,6 +27,8 @@ struct vcpu_svm {
 	unsigned long vmcb_pa;
 	struct svm_cpu_data *svm_data;
 	uint64_t asid_generation;
+	uint64_t sysenter_esp;
+	uint64_t sysenter_eip;
 
 	u64 next_rip;
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 48b22c9892d..e3e7edca35d 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -367,8 +367,6 @@ static void svm_vcpu_init_msrpm(u32 *msrpm)
 #endif
 	set_msr_interception(msrpm, MSR_K6_STAR, 1, 1);
 	set_msr_interception(msrpm, MSR_IA32_SYSENTER_CS, 1, 1);
-	set_msr_interception(msrpm, MSR_IA32_SYSENTER_ESP, 1, 1);
-	set_msr_interception(msrpm, MSR_IA32_SYSENTER_EIP, 1, 1);
 }
 
 static void svm_enable_lbrv(struct vcpu_svm *svm)
@@ -1981,10 +1979,10 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 		*data = svm->vmcb->save.sysenter_cs;
 		break;
 	case MSR_IA32_SYSENTER_EIP:
-		*data = svm->vmcb->save.sysenter_eip;
+		*data = svm->sysenter_eip;
 		break;
 	case MSR_IA32_SYSENTER_ESP:
-		*data = svm->vmcb->save.sysenter_esp;
+		*data = svm->sysenter_esp;
 		break;
 	/* Nobody will change the following 5 values in the VMCB so
 	   we can safely return them on rdmsr. They will always be 0
@@ -2071,9 +2069,11 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		svm->vmcb->save.sysenter_cs = data;
 		break;
 	case MSR_IA32_SYSENTER_EIP:
+		svm->sysenter_eip = data;
 		svm->vmcb->save.sysenter_eip = data;
 		break;
 	case MSR_IA32_SYSENTER_ESP:
+		svm->sysenter_esp = data;
 		svm->vmcb->save.sysenter_esp = data;
 		break;
 	case MSR_IA32_DEBUGCTLMSR:
-- 
cgit v1.2.3


From 6c8166a77c98f473eb91e96a61c3cf78ac617278 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 18:15:37 +0300
Subject: KVM: SVM: Fold kvm_svm.h info svm.c

kvm_svm.h is only included from svm.c, so fold it in.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/kvm_svm.h | 53 --------------------------------------------------
 arch/x86/kvm/svm.c     | 41 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 40 insertions(+), 54 deletions(-)
 delete mode 100644 arch/x86/kvm/kvm_svm.h

(limited to 'arch')

diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
deleted file mode 100644
index 6f275b4cf62..00000000000
--- a/arch/x86/kvm/kvm_svm.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef __KVM_SVM_H
-#define __KVM_SVM_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/kvm_host.h>
-#include <asm/msr.h>
-
-#include <asm/svm.h>
-
-static const u32 host_save_user_msrs[] = {
-#ifdef CONFIG_X86_64
-	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
-	MSR_FS_BASE,
-#endif
-	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
-};
-
-#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
-
-struct kvm_vcpu;
-
-struct vcpu_svm {
-	struct kvm_vcpu vcpu;
-	struct vmcb *vmcb;
-	unsigned long vmcb_pa;
-	struct svm_cpu_data *svm_data;
-	uint64_t asid_generation;
-	uint64_t sysenter_esp;
-	uint64_t sysenter_eip;
-
-	u64 next_rip;
-
-	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
-	u64 host_gs_base;
-	unsigned long host_cr2;
-
-	u32 *msrpm;
-	struct vmcb *hsave;
-	u64 hsave_msr;
-
-	u64 nested_vmcb;
-
-	/* These are the merged vectors */
-	u32 *nested_msrpm;
-
-	/* gpa pointers to the real vectors */
-	u64 nested_vmcb_msrpm;
-};
-
-#endif
-
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e3e7edca35d..522e69597a1 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -15,7 +15,6 @@
  */
 #include <linux/kvm_host.h>
 
-#include "kvm_svm.h"
 #include "irq.h"
 #include "mmu.h"
 #include "kvm_cache_regs.h"
@@ -57,6 +56,46 @@ MODULE_LICENSE("GPL");
 #define nsvm_printk(fmt, args...) do {} while(0)
 #endif
 
+static const u32 host_save_user_msrs[] = {
+#ifdef CONFIG_X86_64
+	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
+	MSR_FS_BASE,
+#endif
+	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
+};
+
+#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
+
+struct kvm_vcpu;
+
+struct vcpu_svm {
+	struct kvm_vcpu vcpu;
+	struct vmcb *vmcb;
+	unsigned long vmcb_pa;
+	struct svm_cpu_data *svm_data;
+	uint64_t asid_generation;
+	uint64_t sysenter_esp;
+	uint64_t sysenter_eip;
+
+	u64 next_rip;
+
+	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
+	u64 host_gs_base;
+	unsigned long host_cr2;
+
+	u32 *msrpm;
+	struct vmcb *hsave;
+	u64 hsave_msr;
+
+	u64 nested_vmcb;
+
+	/* These are the merged vectors */
+	u32 *nested_msrpm;
+
+	/* gpa pointers to the real vectors */
+	u64 nested_vmcb_msrpm;
+};
+
 /* enable NPT for AMD64 and X86 with PAE */
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 static bool npt_enabled = true;
-- 
cgit v1.2.3


From 2986b8c72c272ea58edd37903b042c6da985627d Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 2 Jun 2009 11:46:14 +1000
Subject: KVM: powerpc: fix some init/exit annotations

Fixes a couple of warnings like this one:

WARNING: arch/powerpc/kvm/kvm-440.o(.text+0x1e8c): Section mismatch in reference from the function kvmppc_44x_exit() to the function .exit.text:kvmppc_booke_exit()
The function kvmppc_44x_exit() references a function in an exit section.
Often the function kvmppc_booke_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of kvmppc_booke_exit.

Also add some __init annotations on obvious routines.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/44x.c   | 4 ++--
 arch/powerpc/kvm/booke.c | 2 +-
 arch/powerpc/kvm/e500.c  | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index 0cef809cec2..f4d1b55aa70 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -138,7 +138,7 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 	kmem_cache_free(kvm_vcpu_cache, vcpu_44x);
 }
 
-static int kvmppc_44x_init(void)
+static int __init kvmppc_44x_init(void)
 {
 	int r;
 
@@ -149,7 +149,7 @@ static int kvmppc_44x_init(void)
 	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), THIS_MODULE);
 }
 
-static void kvmppc_44x_exit(void)
+static void __exit kvmppc_44x_exit(void)
 {
 	kvmppc_booke_exit();
 }
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 642e4204cf2..e7bf4d02948 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -520,7 +520,7 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 	return kvmppc_core_vcpu_translate(vcpu, tr);
 }
 
-int kvmppc_booke_init(void)
+int __init kvmppc_booke_init(void)
 {
 	unsigned long ivor[16];
 	unsigned long max_ivor = 0;
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index d8067fd81cd..674e796f7aa 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -132,7 +132,7 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
 }
 
-static int kvmppc_e500_init(void)
+static int __init kvmppc_e500_init(void)
 {
 	int r, i;
 	unsigned long ivor[3];
@@ -160,7 +160,7 @@ static int kvmppc_e500_init(void)
 	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE);
 }
 
-static void kvmppc_e500_exit(void)
+static void __init kvmppc_e500_exit(void)
 {
 	kvmppc_booke_exit();
 }
-- 
cgit v1.2.3


From d76685c4a074041ed168e0b04dd604c3df5dcaa5 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Mon, 1 Jun 2009 12:54:50 -0400
Subject: KVM: cleanup io_device code

We modernize the io_device code so that we use container_of() instead of
dev->private, and move the vtable to a separate ops structure
(theoretically allows better caching for multiple instances of the same
ops structure)

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 40 ++++++++++++++++++++++++++++------------
 arch/x86/kvm/i8259.c | 20 ++++++++++++++------
 arch/x86/kvm/lapic.c | 22 +++++++++++++++-------
 arch/x86/kvm/x86.c   |  2 +-
 4 files changed, 58 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 0990bc9aac1..e800d2d6626 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -350,10 +350,20 @@ void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val)
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 }
 
+static inline struct kvm_pit *dev_to_pit(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_pit, dev);
+}
+
+static inline struct kvm_pit *speaker_to_pit(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_pit, speaker_dev);
+}
+
 static void pit_ioport_write(struct kvm_io_device *this,
 			     gpa_t addr, int len, const void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	int channel, access;
@@ -426,7 +436,7 @@ static void pit_ioport_write(struct kvm_io_device *this,
 static void pit_ioport_read(struct kvm_io_device *this,
 			    gpa_t addr, int len, void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	int ret, count;
@@ -497,7 +507,7 @@ static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
 static void speaker_ioport_write(struct kvm_io_device *this,
 				 gpa_t addr, int len, const void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	u32 val = *(u32 *) data;
@@ -511,7 +521,7 @@ static void speaker_ioport_write(struct kvm_io_device *this,
 static void speaker_ioport_read(struct kvm_io_device *this,
 				gpa_t addr, int len, void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	unsigned int refresh_clock;
@@ -563,6 +573,18 @@ static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 	}
 }
 
+static const struct kvm_io_device_ops pit_dev_ops = {
+	.read     = pit_ioport_read,
+	.write    = pit_ioport_write,
+	.in_range = pit_in_range,
+};
+
+static const struct kvm_io_device_ops speaker_dev_ops = {
+	.read     = speaker_ioport_read,
+	.write    = speaker_ioport_write,
+	.in_range = speaker_in_range,
+};
+
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
@@ -583,17 +605,11 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	spin_lock_init(&pit->pit_state.inject_lock);
 
 	/* Initialize PIO device */
-	pit->dev.read = pit_ioport_read;
-	pit->dev.write = pit_ioport_write;
-	pit->dev.in_range = pit_in_range;
-	pit->dev.private = pit;
+	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
 	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
-		pit->speaker_dev.read = speaker_ioport_read;
-		pit->speaker_dev.write = speaker_ioport_write;
-		pit->speaker_dev.in_range = speaker_in_range;
-		pit->speaker_dev.private = pit;
+		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
 		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
 	}
 
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1ccb50c74f1..2520922282d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -444,10 +444,15 @@ static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
 	}
 }
 
+static inline struct kvm_pic *to_pic(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_pic, dev);
+}
+
 static void picdev_write(struct kvm_io_device *this,
 			 gpa_t addr, int len, const void *val)
 {
-	struct kvm_pic *s = this->private;
+	struct kvm_pic *s = to_pic(this);
 	unsigned char data = *(unsigned char *)val;
 
 	if (len != 1) {
@@ -474,7 +479,7 @@ static void picdev_write(struct kvm_io_device *this,
 static void picdev_read(struct kvm_io_device *this,
 			gpa_t addr, int len, void *val)
 {
-	struct kvm_pic *s = this->private;
+	struct kvm_pic *s = to_pic(this);
 	unsigned char data = 0;
 
 	if (len != 1) {
@@ -516,6 +521,12 @@ static void pic_irq_request(void *opaque, int level)
 	}
 }
 
+static const struct kvm_io_device_ops picdev_ops = {
+	.read     = picdev_read,
+	.write    = picdev_write,
+	.in_range = picdev_in_range,
+};
+
 struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 {
 	struct kvm_pic *s;
@@ -534,10 +545,7 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	/*
 	 * Initialize PIO device
 	 */
-	s->dev.read = picdev_read;
-	s->dev.write = picdev_write;
-	s->dev.in_range = picdev_in_range;
-	s->dev.private = s;
+	kvm_iodevice_init(&s->dev, &picdev_ops);
 	kvm_io_bus_register_dev(&kvm->pio_bus, &s->dev);
 	return s;
 }
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ae99d83f81a..4bfd458a4f3 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -522,10 +522,15 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 	return val;
 }
 
+static inline struct kvm_lapic *to_lapic(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_lapic, dev);
+}
+
 static void apic_mmio_read(struct kvm_io_device *this,
 			   gpa_t address, int len, void *data)
 {
-	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
+	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 result;
@@ -606,7 +611,7 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 static void apic_mmio_write(struct kvm_io_device *this,
 			    gpa_t address, int len, const void *data)
 {
-	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
+	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 val;
@@ -723,7 +728,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
 			   int len, int size)
 {
-	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
+	struct kvm_lapic *apic = to_lapic(this);
 	int ret = 0;
 
 
@@ -917,6 +922,12 @@ static struct kvm_timer_ops lapic_timer_ops = {
 	.is_periodic = lapic_is_periodic,
 };
 
+static const struct kvm_io_device_ops apic_mmio_ops = {
+	.read     = apic_mmio_read,
+	.write    = apic_mmio_write,
+	.in_range = apic_mmio_range,
+};
+
 int kvm_create_lapic(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic;
@@ -951,10 +962,7 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu)
 	vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE;
 
 	kvm_lapic_reset(vcpu);
-	apic->dev.read = apic_mmio_read;
-	apic->dev.write = apic_mmio_write;
-	apic->dev.in_range = apic_mmio_range;
-	apic->dev.private = apic;
+	kvm_iodevice_init(&apic->dev, &apic_mmio_ops);
 
 	return 0;
 nomem_free_apic:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 5eb3b8dd74b..75e9df09784 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2264,7 +2264,7 @@ static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
 
 	if (vcpu->arch.apic) {
 		dev = &vcpu->arch.apic->dev;
-		if (dev->in_range(dev, addr, len, is_write))
+		if (kvm_iodevice_in_range(dev, addr, len, is_write))
 			return dev;
 	}
 	return NULL;
-- 
cgit v1.2.3


From 6b66ac1ae3328177305a2600eb85b7446f41fdc9 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Mon, 1 Jun 2009 12:54:56 -0400
Subject: KVM: do not register i8254 PIO regions until we are initialized

We currently publish the i8254 resources to the pio_bus before the devices
are fully initialized.  Since we hold the pit_lock, its probably not
a real issue.  But lets clean this up anyway.

Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index e800d2d6626..977af7ab819 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -604,15 +604,6 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	mutex_lock(&pit->pit_state.lock);
 	spin_lock_init(&pit->pit_state.inject_lock);
 
-	/* Initialize PIO device */
-	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
-	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
-
-	if (flags & KVM_PIT_SPEAKER_DUMMY) {
-		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
-		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
-	}
-
 	kvm->arch.vpit = pit;
 	pit->kvm = kvm;
 
@@ -631,6 +622,14 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	pit->mask_notifier.func = pit_mask_notifer;
 	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 
+	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
+	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+
+	if (flags & KVM_PIT_SPEAKER_DUMMY) {
+		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
+		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+	}
+
 	return pit;
 }
 
-- 
cgit v1.2.3


From 2d84e993a8947dbeb6b416555940d97522330846 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 18:29:59 +0300
Subject: KVM: VMX: Avoid duplicate ept tlb flush when setting cr3

vmx_set_cr3() will call vmx_tlb_flush(), which will flush the ept context.
So there is no need to call ept_sync_context() explicitly.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c14bffc8c1f..ea0e1d5ebe7 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1651,7 +1651,6 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	if (enable_ept) {
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
-		ept_sync_context(eptp);
 		ept_load_pdptrs(vcpu);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
 			VMX_EPT_IDENTITY_PAGETABLE_ADDR;
-- 
cgit v1.2.3


From 8f5d549f028056d6ad6044f2d9e27ecf361d955e Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 18:41:29 +0300
Subject: KVM: VMX: Simplify pdptr and cr3 management

Instead of reading the PDPTRs from memory after every exit (which is slow
and wrong, as the PDPTRs are stored on the cpu), sync the PDPTRs from
memory to the VMCS before entry, and from the VMCS to memory after exit.
Do the same for cr3.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ea0e1d5ebe7..752465f98bf 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1547,10 +1547,6 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 {
 	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
-		if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
-			printk(KERN_ERR "EPT: Fail to load pdptrs!\n");
-			return;
-		}
 		vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
 		vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
 		vmcs_write64(GUEST_PDPTR2, vcpu->arch.pdptrs[2]);
@@ -1558,6 +1554,16 @@ static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 	}
 }
 
+static void ept_save_pdptrs(struct kvm_vcpu *vcpu)
+{
+	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
+		vcpu->arch.pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
+		vcpu->arch.pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
+		vcpu->arch.pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
+		vcpu->arch.pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
+	}
+}
+
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 
 static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
@@ -1651,7 +1657,6 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	if (enable_ept) {
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
-		ept_load_pdptrs(vcpu);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
 			VMX_EPT_IDENTITY_PAGETABLE_ADDR;
 	}
@@ -3252,7 +3257,7 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	 * to sync with guest real CR3. */
 	if (enable_ept && is_paging(vcpu)) {
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
-		ept_load_pdptrs(vcpu);
+		ept_save_pdptrs(vcpu);
 	}
 
 	if (unlikely(vmx->fail)) {
@@ -3437,6 +3442,10 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (enable_ept && is_paging(vcpu)) {
+		vmcs_writel(GUEST_CR3, vcpu->arch.cr3);
+		ept_load_pdptrs(vcpu);
+	}
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
 		vmx->entry_time = ktime_get();
-- 
cgit v1.2.3


From 6de4f3ada40b336522250a7832a0cc4de8856589 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 22:58:47 +0300
Subject: KVM: Cache pdptrs

Instead of reloading the pdptrs on every entry and exit (vmcs writes on vmx,
guest memory access on svm) extract them on demand.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  4 ++++
 arch/x86/kvm/kvm_cache_regs.h   |  9 +++++++++
 arch/x86/kvm/mmu.c              |  7 +++++--
 arch/x86/kvm/paging_tmpl.h      |  2 +-
 arch/x86/kvm/svm.c              | 24 ++++++++++++++++++------
 arch/x86/kvm/vmx.c              | 22 ++++++++++++++++++----
 arch/x86/kvm/x86.c              |  8 ++++++++
 7 files changed, 63 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 81c68f630b1..1cc901ec4ba 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -120,6 +120,10 @@ enum kvm_reg {
 	NR_VCPU_REGS
 };
 
+enum kvm_reg_ex {
+	VCPU_EXREG_PDPTR = NR_VCPU_REGS,
+};
+
 enum {
 	VCPU_SREG_ES,
 	VCPU_SREG_CS,
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index 1ff819dce7d..7bcc5b6a440 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -29,4 +29,13 @@ static inline void kvm_rip_write(struct kvm_vcpu *vcpu, unsigned long val)
 	kvm_register_write(vcpu, VCPU_REGS_RIP, val);
 }
 
+static inline u64 kvm_pdptr_read(struct kvm_vcpu *vcpu, int index)
+{
+	if (!test_bit(VCPU_EXREG_PDPTR,
+		      (unsigned long *)&vcpu->arch.regs_avail))
+		kvm_x86_ops->cache_reg(vcpu, VCPU_EXREG_PDPTR);
+
+	return vcpu->arch.pdptrs[index];
+}
+
 #endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 0ef5bb2b404..8ee67e3fb9d 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -18,6 +18,7 @@
  */
 
 #include "mmu.h"
+#include "kvm_cache_regs.h"
 
 #include <linux/kvm_host.h>
 #include <linux/types.h>
@@ -1954,6 +1955,7 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 	gfn_t root_gfn;
 	struct kvm_mmu_page *sp;
 	int direct = 0;
+	u64 pdptr;
 
 	root_gfn = vcpu->arch.cr3 >> PAGE_SHIFT;
 
@@ -1981,11 +1983,12 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 
 		ASSERT(!VALID_PAGE(root));
 		if (vcpu->arch.mmu.root_level == PT32E_ROOT_LEVEL) {
-			if (!is_present_pte(vcpu->arch.pdptrs[i])) {
+			pdptr = kvm_pdptr_read(vcpu, i);
+			if (!is_present_pte(pdptr)) {
 				vcpu->arch.mmu.pae_root[i] = 0;
 				continue;
 			}
-			root_gfn = vcpu->arch.pdptrs[i] >> PAGE_SHIFT;
+			root_gfn = pdptr >> PAGE_SHIFT;
 		} else if (vcpu->arch.mmu.root_level == 0)
 			root_gfn = 0;
 		if (mmu_check_root(vcpu, root_gfn))
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 67785f63539..4cb1dbfd7c2 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -131,7 +131,7 @@ walk:
 	pte = vcpu->arch.cr3;
 #if PTTYPE == 64
 	if (!is_long_mode(vcpu)) {
-		pte = vcpu->arch.pdptrs[(addr >> 30) & 3];
+		pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
 		if (!is_present_pte(pte))
 			goto not_present;
 		--walker->level;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 522e69597a1..7749b0692cb 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -777,6 +777,18 @@ static void svm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 	to_svm(vcpu)->vmcb->save.rflags = rflags;
 }
 
+static void svm_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
+{
+	switch (reg) {
+	case VCPU_EXREG_PDPTR:
+		BUG_ON(!npt_enabled);
+		load_pdptrs(vcpu, vcpu->arch.cr3);
+		break;
+	default:
+		BUG();
+	}
+}
+
 static void svm_set_vintr(struct vcpu_svm *svm)
 {
 	svm->vmcb->control.intercept |= 1ULL << INTERCEPT_VINTR;
@@ -2285,12 +2297,6 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		}
 		vcpu->arch.cr0 = svm->vmcb->save.cr0;
 		vcpu->arch.cr3 = svm->vmcb->save.cr3;
-		if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
-			if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
-				kvm_inject_gp(vcpu, 0);
-				return 1;
-			}
-		}
 		if (mmu_reload) {
 			kvm_mmu_reset_context(vcpu);
 			kvm_mmu_load(vcpu);
@@ -2641,6 +2647,11 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	svm->next_rip = 0;
 
+	if (npt_enabled) {
+		vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
+		vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
+	}
+
 	svm_complete_interrupts(svm);
 }
 
@@ -2749,6 +2760,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.set_gdt = svm_set_gdt,
 	.get_dr = svm_get_dr,
 	.set_dr = svm_set_dr,
+	.cache_reg = svm_cache_reg,
 	.get_rflags = svm_get_rflags,
 	.set_rflags = svm_set_rflags,
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 752465f98bf..d726dec6952 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -161,6 +161,8 @@ static struct kvm_vmx_segment_field {
 	VMX_SEGMENT_FIELD(LDTR),
 };
 
+static void ept_save_pdptrs(struct kvm_vcpu *vcpu);
+
 /*
  * Keep MSR_K6_STAR at the end, as setup_msrs() will try to optimize it
  * away by decrementing the array size.
@@ -1047,6 +1049,10 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 	case VCPU_REGS_RIP:
 		vcpu->arch.regs[VCPU_REGS_RIP] = vmcs_readl(GUEST_RIP);
 		break;
+	case VCPU_EXREG_PDPTR:
+		if (enable_ept)
+			ept_save_pdptrs(vcpu);
+		break;
 	default:
 		break;
 	}
@@ -1546,6 +1552,10 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 
 static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 {
+	if (!test_bit(VCPU_EXREG_PDPTR,
+		      (unsigned long *)&vcpu->arch.regs_dirty))
+		return;
+
 	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
 		vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
 		vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
@@ -1562,6 +1572,11 @@ static void ept_save_pdptrs(struct kvm_vcpu *vcpu)
 		vcpu->arch.pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
 		vcpu->arch.pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
 	}
+
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_avail);
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_dirty);
 }
 
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
@@ -3255,10 +3270,8 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
 	 * to sync with guest real CR3. */
-	if (enable_ept && is_paging(vcpu)) {
+	if (enable_ept && is_paging(vcpu))
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
-		ept_save_pdptrs(vcpu);
-	}
 
 	if (unlikely(vmx->fail)) {
 		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
@@ -3567,7 +3580,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
 	      );
 
-	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
+	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
+				  | (1 << VCPU_EXREG_PDPTR));
 	vcpu->arch.regs_dirty = 0;
 
 	get_debugreg(vcpu->arch.dr6, 6);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 75e9df09784..2ad8c97f58c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -246,6 +246,10 @@ int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
 	ret = 1;
 
 	memcpy(vcpu->arch.pdptrs, pdpte, sizeof(vcpu->arch.pdptrs));
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_avail);
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_dirty);
 out:
 
 	return ret;
@@ -261,6 +265,10 @@ static bool pdptrs_changed(struct kvm_vcpu *vcpu)
 	if (is_long_mode(vcpu) || !is_pae(vcpu))
 		return false;
 
+	if (!test_bit(VCPU_EXREG_PDPTR,
+		      (unsigned long *)&vcpu->arch.regs_avail))
+		return true;
+
 	r = kvm_read_guest(vcpu->kvm, vcpu->arch.cr3 & ~31u, pdpte, sizeof(pdpte));
 	if (r < 0)
 		goto out;
-- 
cgit v1.2.3


From 596ae895653fe336b9b5815ad2c175d22bb26f21 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 3 Jun 2009 14:12:10 +0300
Subject: KVM: VMX: Fix reporting of unhandled EPT violations

Instead of returning -ENOTSUPP, exit normally but indicate the hardware
exit reason.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index d726dec6952..959cb59cfae 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3153,8 +3153,8 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
 			(long unsigned int)exit_qualification);
 		kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-		kvm_run->hw.hardware_exit_reason = 0;
-		return -ENOTSUPP;
+		kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_VIOLATION;
+		return 0;
 	}
 
 	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
-- 
cgit v1.2.3


From 0cfb50e50dd27539fed9ba3cb33b0f22c0cddef0 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Fri, 5 Jun 2009 14:54:29 +0800
Subject: KVM: ppc: e500: Move to Book-3e MMU definitions

According to commit 70fe3af8403f85196bb74f22ce4813db7dfedc1a.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_tlb.c | 10 +++++-----
 arch/powerpc/kvm/e500_tlb.h |  6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index 0e773fc2d5e..a2048ac095a 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -269,7 +269,7 @@ static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu,
 	tlbsel = (vcpu_e500->mas4 >> 28) & 0x1;
 	victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0;
 	pidsel = (vcpu_e500->mas4 >> 16) & 0xf;
-	tsized = (vcpu_e500->mas4 >> 8) & 0xf;
+	tsized = (vcpu_e500->mas4 >> 7) & 0x1f;
 
 	vcpu_e500->mas0 = MAS0_TLBSEL(tlbsel) | MAS0_ESEL(victim)
 		| MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
@@ -309,7 +309,7 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 	vcpu_e500->shadow_pages[tlbsel][esel] = new_page;
 
 	/* Force TS=1 IPROT=0 TSIZE=4KB for all guest mappings. */
-	stlbe->mas1 = MAS1_TSIZE(BOOKE_PAGESZ_4K)
+	stlbe->mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K)
 		| MAS1_TID(get_tlb_tid(gtlbe)) | MAS1_TS | MAS1_VALID;
 	stlbe->mas2 = (gvaddr & MAS2_EPN)
 		| e500_shadow_mas2_attrib(gtlbe->mas2,
@@ -545,7 +545,7 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu)
 		case 0:
 			/* TLB0 */
 			gtlbe->mas1 &= ~MAS1_TSIZE(~0);
-			gtlbe->mas1 |= MAS1_TSIZE(BOOKE_PAGESZ_4K);
+			gtlbe->mas1 |= MAS1_TSIZE(BOOK3E_PAGESZ_4K);
 
 			stlbsel = 0;
 			sesel = kvmppc_e500_stlbe_map(vcpu_e500, 0, esel);
@@ -679,14 +679,14 @@ void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *vcpu_e500)
 
 	/* Insert large initial mapping for guest. */
 	tlbe = &vcpu_e500->guest_tlb[1][0];
-	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_256M);
+	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_256M);
 	tlbe->mas2 = 0;
 	tlbe->mas3 = E500_TLB_SUPER_PERM_MASK;
 	tlbe->mas7 = 0;
 
 	/* 4K map for serial output. Used by kernel wrapper. */
 	tlbe = &vcpu_e500->guest_tlb[1][1];
-	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_4K);
+	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_4K);
 	tlbe->mas2 = (0xe0004500 & 0xFFFFF000) | MAS2_I | MAS2_G;
 	tlbe->mas3 = (0xe0004500 & 0xFFFFF000) | E500_TLB_SUPER_PERM_MASK;
 	tlbe->mas7 = 0;
diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h
index 45b064b7690..d28e3010a5e 100644
--- a/arch/powerpc/kvm/e500_tlb.h
+++ b/arch/powerpc/kvm/e500_tlb.h
@@ -16,7 +16,7 @@
 #define __KVM_E500_TLB_H__
 
 #include <linux/kvm_host.h>
-#include <asm/mmu-fsl-booke.h>
+#include <asm/mmu-book3e.h>
 #include <asm/tlb.h>
 #include <asm/kvm_e500.h>
 
@@ -59,7 +59,7 @@ extern void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *);
 /* TLB helper functions */
 static inline unsigned int get_tlb_size(const struct tlbe *tlbe)
 {
-	return (tlbe->mas1 >> 8) & 0xf;
+	return (tlbe->mas1 >> 7) & 0x1f;
 }
 
 static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe)
@@ -70,7 +70,7 @@ static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe)
 static inline u64 get_tlb_bytes(const struct tlbe *tlbe)
 {
 	unsigned int pgsize = get_tlb_size(tlbe);
-	return 1ULL << 10 << (pgsize << 1);
+	return 1ULL << 10 << pgsize;
 }
 
 static inline gva_t get_tlb_end(const struct tlbe *tlbe)
-- 
cgit v1.2.3


From 5b7c1a2c17e77cd5416755bb9ac63278996f6c51 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Fri, 5 Jun 2009 14:54:30 +0800
Subject: KVM: ppc: e500: Directly pass pvr to guest

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_host.h | 1 -
 arch/powerpc/kvm/e500.c             | 3 ---
 arch/powerpc/kvm/emulate.c          | 2 +-
 3 files changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index fddc3ed715f..d4caa6127f5 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -153,7 +153,6 @@ struct kvm_vcpu_arch {
 	u32 pid;
 	u32 swap_pid;
 
-	u32 pvr;
 	u32 ccr0;
 	u32 ccr1;
 	u32 dbcr0;
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 674e796f7aa..64949eef43f 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -60,9 +60,6 @@ int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu)
 
 	kvmppc_e500_tlb_setup(vcpu_e500);
 
-	/* Use the same core vertion as host's */
-	vcpu->arch.pvr = mfspr(SPRN_PVR);
-
 	return 0;
 }
 
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index a561d6e8da1..f8b8248cb9b 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -187,7 +187,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			case SPRN_SRR1:
 				vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
 			case SPRN_PVR:
-				vcpu->arch.gpr[rt] = vcpu->arch.pvr; break;
+				vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
 
 			/* Note: mftb and TBRL/TBWL are user-accessible, so
 			 * the guest can always access the real TB anyways.
-- 
cgit v1.2.3


From 06579dd9c12f36ac575460a226d2020d84a0128b Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Fri, 5 Jun 2009 14:54:31 +0800
Subject: KVM: ppc: e500: Add MMUCFG and PVR emulation

Latest kernel started to use these two registers.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_emulate.c | 3 +++
 arch/powerpc/kvm/emulate.c      | 2 ++
 2 files changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index 3f760414b9f..be95b8d8e3b 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -180,6 +180,9 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	case SPRN_MMUCSR0:
 		vcpu->arch.gpr[rt] = 0; break;
 
+	case SPRN_MMUCFG:
+		vcpu->arch.gpr[rt] = mfspr(SPRN_MMUCFG); break;
+
 	/* extra exceptions */
 	case SPRN_IVOR32:
 		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL];
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index f8b8248cb9b..28a8237fe78 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -188,6 +188,8 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 				vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
 			case SPRN_PVR:
 				vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
+			case SPRN_PIR:
+				vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break;
 
 			/* Note: mftb and TBRL/TBWL are user-accessible, so
 			 * the guest can always access the real TB anyways.
-- 
cgit v1.2.3


From 238adc77051ab19b35663e7f214f52eaf44ed7ef Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Fri, 5 Jun 2009 16:13:34 +0200
Subject: KVM: Cleanup LAPIC interface

None of the interface services the LAPIC emulation provides need to be
exported to modules, and kvm_lapic_get_base is even totally unused
today.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4bfd458a4f3..a23f42e550a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -194,7 +194,6 @@ int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 
 	return highest_irr;
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_find_highest_irr);
 
 static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			     int vector, int level, int trig_mode);
@@ -768,7 +767,6 @@ void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
 	apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
 		     | (apic_get_reg(apic, APIC_TASKPRI) & 4));
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_set_tpr);
 
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
 {
@@ -781,7 +779,6 @@ u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
 
 	return (tpr & 0xf0) >> 4;
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_get_cr8);
 
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 {
@@ -805,12 +802,6 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 
 }
 
-u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.apic_base;
-}
-EXPORT_SYMBOL_GPL(kvm_lapic_get_base);
-
 void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic;
@@ -860,7 +851,6 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 		   vcpu, kvm_apic_id(apic),
 		   vcpu->arch.apic_base, apic->base_address);
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_reset);
 
 bool kvm_apic_present(struct kvm_vcpu *vcpu)
 {
@@ -871,7 +861,6 @@ int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
 {
 	return kvm_apic_present(vcpu) && apic_sw_enabled(vcpu->arch.apic);
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_enabled);
 
 /*
  *----------------------------------------------------------------------
@@ -970,7 +959,6 @@ nomem_free_apic:
 nomem:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL_GPL(kvm_create_lapic);
 
 int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu)
 {
-- 
cgit v1.2.3


From 9f4cc12765ea48a40347449d6802a3322ced8709 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 4 Jun 2009 15:08:21 -0300
Subject: KVM: Grab pic lock in kvm_pic_clear_isr_ack

isr_ack is protected by kvm_pic->lock.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 2520922282d..bf94a45f4f8 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -72,8 +72,10 @@ static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
 {
 	struct kvm_pic *s = pic_irqchip(kvm);
+	pic_lock(s);
 	s->pics[0].isr_ack = 0xff;
 	s->pics[1].isr_ack = 0xff;
+	pic_unlock(s);
 }
 
 /*
-- 
cgit v1.2.3


From fa40a8214bb9bcae8d49c234c19d8b4a6c1f37ff Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 4 Jun 2009 15:08:24 -0300
Subject: KVM: switch irq injection/acking data structures to irq_lock

Protect irq injection/acking data structures with a separate irq_lock
mutex. This fixes the following deadlock:

CPU A                               CPU B
kvm_vm_ioctl_deassign_dev_irq()
  mutex_lock(&kvm->lock);            worker_thread()
  -> kvm_deassign_irq()                -> kvm_assigned_dev_interrupt_work_handler()
    -> deassign_host_irq()               mutex_lock(&kvm->lock);
      -> cancel_work_sync() [blocked]

[gleb: fix ia64 path]

Reported-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c |  4 ++--
 arch/x86/kvm/i8254.c     |  4 ++--
 arch/x86/kvm/lapic.c     |  4 ++++
 arch/x86/kvm/x86.c       | 19 +++++++++----------
 4 files changed, 17 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 319922137fd..8dde36953af 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1000,10 +1000,10 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->lock);
+			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 				    irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->lock);
+			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 977af7ab819..3837db65d33 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -654,10 +654,10 @@ static void __inject_pit_timer_intr(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 	int i;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->irq_lock);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0);
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->irq_lock);
 
 	/*
 	 * Provides NMI watchdog support via Virtual Wire mode.
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index a23f42e550a..44f20cdb570 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -424,7 +424,9 @@ static void apic_set_eoi(struct kvm_lapic *apic)
 		trigger_mode = IOAPIC_LEVEL_TRIG;
 	else
 		trigger_mode = IOAPIC_EDGE_TRIG;
+	mutex_lock(&apic->vcpu->kvm->irq_lock);
 	kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
+	mutex_unlock(&apic->vcpu->kvm->irq_lock);
 }
 
 static void apic_send_ipi(struct kvm_lapic *apic)
@@ -448,7 +450,9 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 		   irq.trig_mode, irq.level, irq.dest_mode, irq.delivery_mode,
 		   irq.vector);
 
+	mutex_lock(&apic->vcpu->kvm->irq_lock);
 	kvm_irq_delivery_to_apic(apic->vcpu->kvm, apic, &irq);
+	mutex_unlock(&apic->vcpu->kvm->irq_lock);
 }
 
 static u32 apic_get_tmcct(struct kvm_lapic *apic)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2ad8c97f58c..05cbe83c74e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2136,10 +2136,10 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->lock);
+			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 					irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->lock);
+			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
@@ -2385,12 +2385,11 @@ mmio:
 	 */
 	mutex_lock(&vcpu->kvm->lock);
 	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
+	mutex_unlock(&vcpu->kvm->lock);
 	if (mmio_dev) {
 		kvm_iodevice_read(mmio_dev, gpa, bytes, val);
-		mutex_unlock(&vcpu->kvm->lock);
 		return X86EMUL_CONTINUE;
 	}
-	mutex_unlock(&vcpu->kvm->lock);
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2440,12 +2439,11 @@ mmio:
 	 */
 	mutex_lock(&vcpu->kvm->lock);
 	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
+	mutex_unlock(&vcpu->kvm->lock);
 	if (mmio_dev) {
 		kvm_iodevice_write(mmio_dev, gpa, bytes, val);
-		mutex_unlock(&vcpu->kvm->lock);
 		return X86EMUL_CONTINUE;
 	}
-	mutex_unlock(&vcpu->kvm->lock);
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2768,7 +2766,6 @@ static void kernel_pio(struct kvm_io_device *pio_dev,
 {
 	/* TODO: String I/O for in kernel device */
 
-	mutex_lock(&vcpu->kvm->lock);
 	if (vcpu->arch.pio.in)
 		kvm_iodevice_read(pio_dev, vcpu->arch.pio.port,
 				  vcpu->arch.pio.size,
@@ -2777,7 +2774,6 @@ static void kernel_pio(struct kvm_io_device *pio_dev,
 		kvm_iodevice_write(pio_dev, vcpu->arch.pio.port,
 				   vcpu->arch.pio.size,
 				   pd);
-	mutex_unlock(&vcpu->kvm->lock);
 }
 
 static void pio_string_write(struct kvm_io_device *pio_dev,
@@ -2787,14 +2783,12 @@ static void pio_string_write(struct kvm_io_device *pio_dev,
 	void *pd = vcpu->arch.pio_data;
 	int i;
 
-	mutex_lock(&vcpu->kvm->lock);
 	for (i = 0; i < io->cur_count; i++) {
 		kvm_iodevice_write(pio_dev, io->port,
 				   io->size,
 				   pd);
 		pd += io->size;
 	}
-	mutex_unlock(&vcpu->kvm->lock);
 }
 
 static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
@@ -2831,7 +2825,9 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	memcpy(vcpu->arch.pio_data, &val, 4);
 
+	mutex_lock(&vcpu->kvm->lock);
 	pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
+	mutex_unlock(&vcpu->kvm->lock);
 	if (pio_dev) {
 		kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
 		complete_pio(vcpu);
@@ -2895,9 +2891,12 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
 	vcpu->arch.pio.guest_gva = address;
 
+	mutex_lock(&vcpu->kvm->lock);
 	pio_dev = vcpu_find_pio_dev(vcpu, port,
 				    vcpu->arch.pio.cur_count,
 				    !vcpu->arch.pio.in);
+	mutex_unlock(&vcpu->kvm->lock);
+
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
-- 
cgit v1.2.3


From 3a624e29c7587b79abab60e279f9d1a62a3d4716 Mon Sep 17 00:00:00 2001
From: Nitin A Kamble <nitin.a.kamble@intel.com>
Date: Mon, 8 Jun 2009 11:34:16 -0700
Subject: KVM: VMX: Support Unrestricted Guest feature

"Unrestricted Guest" feature is added in the VMX specification.
Intel Westmere and onwards processors will support this feature.

    It allows kvm guests to run real mode and unpaged mode
code natively in the VMX mode when EPT is turned on. With the
unrestricted guest there is no need to emulate the guest real mode code
in the vm86 container or in the emulator. Also the guest big real mode
code works like native.

  The attached patch enhances KVM to use the unrestricted guest feature
if available on the processor. It also adds a new kernel/module
parameter to disable the unrestricted guest feature at the boot time.

Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 12 +++++----
 arch/x86/include/asm/vmx.h      |  1 +
 arch/x86/kvm/vmx.c              | 60 ++++++++++++++++++++++++++++++++++++-----
 3 files changed, 62 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 1cc901ec4ba..a1a96a57bb9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -37,12 +37,14 @@
 #define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS |	\
 				  0xFFFFFF0000000000ULL)
 
-#define KVM_GUEST_CR0_MASK				   \
-	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE \
-	 | X86_CR0_NW | X86_CR0_CD)
+#define KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST				\
+	(X86_CR0_WP | X86_CR0_NE | X86_CR0_NW | X86_CR0_CD)
+#define KVM_GUEST_CR0_MASK						\
+	(KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
+#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST				\
+	(X86_CR0_WP | X86_CR0_NE | X86_CR0_TS | X86_CR0_MP)
 #define KVM_VM_CR0_ALWAYS_ON						\
-	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE | X86_CR0_TS \
-	 | X86_CR0_MP)
+	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
 #define KVM_GUEST_CR4_MASK						\
 	(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
 #define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 11be5ad2e0e..e7927a639d6 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -55,6 +55,7 @@
 #define SECONDARY_EXEC_ENABLE_EPT               0x00000002
 #define SECONDARY_EXEC_ENABLE_VPID              0x00000020
 #define SECONDARY_EXEC_WBINVD_EXITING		0x00000040
+#define SECONDARY_EXEC_UNRESTRICTED_GUEST	0x00000080
 
 
 #define PIN_BASED_EXT_INTR_MASK                 0x00000001
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 959cb59cfae..f0f9773f0b0 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -51,6 +51,10 @@ module_param_named(flexpriority, flexpriority_enabled, bool, S_IRUGO);
 static int __read_mostly enable_ept = 1;
 module_param_named(ept, enable_ept, bool, S_IRUGO);
 
+static int __read_mostly enable_unrestricted_guest = 1;
+module_param_named(unrestricted_guest,
+			enable_unrestricted_guest, bool, S_IRUGO);
+
 static int __read_mostly emulate_invalid_guest_state = 0;
 module_param(emulate_invalid_guest_state, bool, S_IRUGO);
 
@@ -279,6 +283,12 @@ static inline int cpu_has_vmx_ept(void)
 		SECONDARY_EXEC_ENABLE_EPT;
 }
 
+static inline int cpu_has_vmx_unrestricted_guest(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_UNRESTRICTED_GUEST;
+}
+
 static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
 {
 	return flexpriority_enabled &&
@@ -1210,7 +1220,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 		opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
 			SECONDARY_EXEC_WBINVD_EXITING |
 			SECONDARY_EXEC_ENABLE_VPID |
-			SECONDARY_EXEC_ENABLE_EPT;
+			SECONDARY_EXEC_ENABLE_EPT |
+			SECONDARY_EXEC_UNRESTRICTED_GUEST;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
 					&_cpu_based_2nd_exec_control) < 0)
@@ -1340,8 +1351,13 @@ static __init int hardware_setup(void)
 	if (!cpu_has_vmx_vpid())
 		enable_vpid = 0;
 
-	if (!cpu_has_vmx_ept())
+	if (!cpu_has_vmx_ept()) {
 		enable_ept = 0;
+		enable_unrestricted_guest = 0;
+	}
+
+	if (!cpu_has_vmx_unrestricted_guest())
+		enable_unrestricted_guest = 0;
 
 	if (!cpu_has_vmx_flexpriority())
 		flexpriority_enabled = 0;
@@ -1440,6 +1456,9 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	unsigned long flags;
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (enable_unrestricted_guest)
+		return;
+
 	vmx->emulation_required = 1;
 	vcpu->arch.rmode.vm86_active = 1;
 
@@ -1593,7 +1612,6 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
 		vmx_set_cr4(vcpu, vcpu->arch.cr4);
-		*hw_cr0 |= X86_CR0_PE | X86_CR0_PG;
 		*hw_cr0 &= ~X86_CR0_WP;
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
@@ -1620,8 +1638,13 @@ static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
 
 static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
-	unsigned long hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) |
-				KVM_VM_CR0_ALWAYS_ON;
+	unsigned long hw_cr0;
+
+	if (enable_unrestricted_guest)
+		hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST)
+			| KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST;
+	else
+		hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON;
 
 	vmx_fpu_deactivate(vcpu);
 
@@ -1786,6 +1809,21 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu,
 		ar = 0xf3;
 	} else
 		ar = vmx_segment_access_rights(var);
+
+	/*
+	 *   Fix the "Accessed" bit in AR field of segment registers for older
+	 * qemu binaries.
+	 *   IA32 arch specifies that at the time of processor reset the
+	 * "Accessed" bit in the AR field of segment registers is 1. And qemu
+	 * is setting it to 0 in the usedland code. This causes invalid guest
+	 * state vmexit when "unrestricted guest" mode is turned on.
+	 *    Fix for this setup issue in cpu_reset is being pushed in the qemu
+	 * tree. Newer qemu binaries with that qemu fix would not need this
+	 * kvm hack.
+	 */
+	if (enable_unrestricted_guest && (seg != VCPU_SREG_LDTR))
+		ar |= 0x1; /* Accessed */
+
 	vmcs_write32(sf->ar_bytes, ar);
 }
 
@@ -2082,11 +2120,19 @@ out:
 static void seg_setup(int seg)
 {
 	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+	unsigned int ar;
 
 	vmcs_write16(sf->selector, 0);
 	vmcs_writel(sf->base, 0);
 	vmcs_write32(sf->limit, 0xffff);
-	vmcs_write32(sf->ar_bytes, 0xf3);
+	if (enable_unrestricted_guest) {
+		ar = 0x93;
+		if (seg == VCPU_SREG_CS)
+			ar |= 0x08; /* code segment */
+	} else
+		ar = 0xf3;
+
+	vmcs_write32(sf->ar_bytes, ar);
 }
 
 static int alloc_apic_access_page(struct kvm *kvm)
@@ -2229,6 +2275,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
 		if (!enable_ept)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
+		if (!enable_unrestricted_guest)
+			exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
 	}
 
-- 
cgit v1.2.3


From 7ffd92c53c5ebd0ad5a68ac3ca033c3a06374d19 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 9 Jun 2009 14:10:45 +0300
Subject: KVM: VMX: Move rmode structure to vmx-specific code

rmode is only used in vmx, so move it to vmx.c

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 10 ------
 arch/x86/kvm/vmx.c              | 78 +++++++++++++++++++++++------------------
 2 files changed, 44 insertions(+), 44 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index a1a96a57bb9..c7b0cc2b702 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -340,16 +340,6 @@ struct kvm_vcpu_arch {
 		u8 nr;
 	} interrupt;
 
-	struct {
-		int vm86_active;
-		u8 save_iopl;
-		struct kvm_save_segment {
-			u16 selector;
-			unsigned long base;
-			u32 limit;
-			u32 ar;
-		} tr, es, ds, fs, gs;
-	} rmode;
 	int halt_request; /* real mode on Intel only */
 
 	int cpuid_nent;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f0f9773f0b0..ae682929a64 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -88,6 +88,14 @@ struct vcpu_vmx {
 		int           guest_efer_loaded;
 	} host_state;
 	struct {
+		int vm86_active;
+		u8 save_iopl;
+		struct kvm_save_segment {
+			u16 selector;
+			unsigned long base;
+			u32 limit;
+			u32 ar;
+		} tr, es, ds, fs, gs;
 		struct {
 			bool pending;
 			u8 vector;
@@ -516,7 +524,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
 			eb |= 1u << BP_VECTOR;
 	}
-	if (vcpu->arch.rmode.vm86_active)
+	if (to_vmx(vcpu)->rmode.vm86_active)
 		eb = ~0;
 	if (enable_ept)
 		eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
@@ -752,7 +760,7 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
-	if (vcpu->arch.rmode.vm86_active)
+	if (to_vmx(vcpu)->rmode.vm86_active)
 		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 	vmcs_writel(GUEST_RFLAGS, rflags);
 }
@@ -809,7 +817,7 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
 	}
 
-	if (vcpu->arch.rmode.vm86_active) {
+	if (vmx->rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = nr;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -1395,15 +1403,15 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	vmx->emulation_required = 1;
-	vcpu->arch.rmode.vm86_active = 0;
+	vmx->rmode.vm86_active = 0;
 
-	vmcs_writel(GUEST_TR_BASE, vcpu->arch.rmode.tr.base);
-	vmcs_write32(GUEST_TR_LIMIT, vcpu->arch.rmode.tr.limit);
-	vmcs_write32(GUEST_TR_AR_BYTES, vcpu->arch.rmode.tr.ar);
+	vmcs_writel(GUEST_TR_BASE, vmx->rmode.tr.base);
+	vmcs_write32(GUEST_TR_LIMIT, vmx->rmode.tr.limit);
+	vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
 	flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
-	flags |= (vcpu->arch.rmode.save_iopl << IOPL_SHIFT);
+	flags |= (vmx->rmode.save_iopl << IOPL_SHIFT);
 	vmcs_writel(GUEST_RFLAGS, flags);
 
 	vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
@@ -1414,10 +1422,10 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	if (emulate_invalid_guest_state)
 		return;
 
-	fix_pmode_dataseg(VCPU_SREG_ES, &vcpu->arch.rmode.es);
-	fix_pmode_dataseg(VCPU_SREG_DS, &vcpu->arch.rmode.ds);
-	fix_pmode_dataseg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
-	fix_pmode_dataseg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
+	fix_pmode_dataseg(VCPU_SREG_ES, &vmx->rmode.es);
+	fix_pmode_dataseg(VCPU_SREG_DS, &vmx->rmode.ds);
+	fix_pmode_dataseg(VCPU_SREG_GS, &vmx->rmode.gs);
+	fix_pmode_dataseg(VCPU_SREG_FS, &vmx->rmode.fs);
 
 	vmcs_write16(GUEST_SS_SELECTOR, 0);
 	vmcs_write32(GUEST_SS_AR_BYTES, 0x93);
@@ -1460,19 +1468,19 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 		return;
 
 	vmx->emulation_required = 1;
-	vcpu->arch.rmode.vm86_active = 1;
+	vmx->rmode.vm86_active = 1;
 
-	vcpu->arch.rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
+	vmx->rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
 	vmcs_writel(GUEST_TR_BASE, rmode_tss_base(vcpu->kvm));
 
-	vcpu->arch.rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
+	vmx->rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
 	vmcs_write32(GUEST_TR_LIMIT, RMODE_TSS_SIZE - 1);
 
-	vcpu->arch.rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
+	vmx->rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
 	vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
-	vcpu->arch.rmode.save_iopl
+	vmx->rmode.save_iopl
 		= (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
 
 	flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
@@ -1494,10 +1502,10 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 		vmcs_writel(GUEST_CS_BASE, 0xf0000);
 	vmcs_write16(GUEST_CS_SELECTOR, vmcs_readl(GUEST_CS_BASE) >> 4);
 
-	fix_rmode_seg(VCPU_SREG_ES, &vcpu->arch.rmode.es);
-	fix_rmode_seg(VCPU_SREG_DS, &vcpu->arch.rmode.ds);
-	fix_rmode_seg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
-	fix_rmode_seg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
+	fix_rmode_seg(VCPU_SREG_ES, &vmx->rmode.es);
+	fix_rmode_seg(VCPU_SREG_DS, &vmx->rmode.ds);
+	fix_rmode_seg(VCPU_SREG_GS, &vmx->rmode.gs);
+	fix_rmode_seg(VCPU_SREG_FS, &vmx->rmode.fs);
 
 continue_rmode:
 	kvm_mmu_reset_context(vcpu);
@@ -1638,6 +1646,7 @@ static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
 
 static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long hw_cr0;
 
 	if (enable_unrestricted_guest)
@@ -1648,10 +1657,10 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 	vmx_fpu_deactivate(vcpu);
 
-	if (vcpu->arch.rmode.vm86_active && (cr0 & X86_CR0_PE))
+	if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE))
 		enter_pmode(vcpu);
 
-	if (!vcpu->arch.rmode.vm86_active && !(cr0 & X86_CR0_PE))
+	if (!vmx->rmode.vm86_active && !(cr0 & X86_CR0_PE))
 		enter_rmode(vcpu);
 
 #ifdef CONFIG_X86_64
@@ -1707,7 +1716,7 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
-	unsigned long hw_cr4 = cr4 | (vcpu->arch.rmode.vm86_active ?
+	unsigned long hw_cr4 = cr4 | (to_vmx(vcpu)->rmode.vm86_active ?
 		    KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
 
 	vcpu->arch.cr4 = cr4;
@@ -1787,20 +1796,21 @@ static u32 vmx_segment_access_rights(struct kvm_segment *var)
 static void vmx_set_segment(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg)
 {
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
 	u32 ar;
 
-	if (vcpu->arch.rmode.vm86_active && seg == VCPU_SREG_TR) {
-		vcpu->arch.rmode.tr.selector = var->selector;
-		vcpu->arch.rmode.tr.base = var->base;
-		vcpu->arch.rmode.tr.limit = var->limit;
-		vcpu->arch.rmode.tr.ar = vmx_segment_access_rights(var);
+	if (vmx->rmode.vm86_active && seg == VCPU_SREG_TR) {
+		vmx->rmode.tr.selector = var->selector;
+		vmx->rmode.tr.base = var->base;
+		vmx->rmode.tr.limit = var->limit;
+		vmx->rmode.tr.ar = vmx_segment_access_rights(var);
 		return;
 	}
 	vmcs_writel(sf->base, var->base);
 	vmcs_write32(sf->limit, var->limit);
 	vmcs_write16(sf->selector, var->selector);
-	if (vcpu->arch.rmode.vm86_active && var->s) {
+	if (vmx->rmode.vm86_active && var->s) {
 		/*
 		 * Hack real-mode segments into vm86 compatibility.
 		 */
@@ -2394,7 +2404,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		goto out;
 	}
 
-	vmx->vcpu.arch.rmode.vm86_active = 0;
+	vmx->rmode.vm86_active = 0;
 
 	vmx->soft_vnmi_blocked = 0;
 
@@ -2532,7 +2542,7 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu)
 	KVMTRACE_1D(INJ_VIRQ, vcpu, (u32)irq, handler);
 
 	++vcpu->stat.irq_injections;
-	if (vcpu->arch.rmode.vm86_active) {
+	if (vmx->rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = irq;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -2573,7 +2583,7 @@ static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
 	}
 
 	++vcpu->stat.nmi_injections;
-	if (vcpu->arch.rmode.vm86_active) {
+	if (vmx->rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = NMI_VECTOR;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -2737,7 +2747,7 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
 
-	if (vcpu->arch.rmode.vm86_active &&
+	if (vmx->rmode.vm86_active &&
 	    handle_rmode_exception(vcpu, intr_info & INTR_INFO_VECTOR_MASK,
 								error_code)) {
 		if (vcpu->arch.halt_request) {
-- 
cgit v1.2.3


From 439e218a6f4716da484314fc5a1f0a59b0212c01 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 10 Jun 2009 12:56:54 +0300
Subject: KVM: MMU: Fix is_dirty_pte()

is_dirty_pte() is used on guest ptes, not shadow ptes, so it needs to avoid
shadow_dirty_mask and use PT_DIRTY_MASK instead.

Misdetecting dirty pages could lead to unnecessarily setting the dirty bit
under EPT.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 8ee67e3fb9d..8f2cb29db2f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -242,7 +242,7 @@ static int is_writeble_pte(unsigned long pte)
 
 static int is_dirty_pte(unsigned long pte)
 {
-	return pte & shadow_dirty_mask;
+	return pte & PT_DIRTY_MASK;
 }
 
 static int is_rmap_pte(u64 pte)
-- 
cgit v1.2.3


From 43a3795a3a12425de31e25ce0ebc3bb41501cef7 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 10 Jun 2009 14:12:05 +0300
Subject: KVM: MMU: Adjust pte accessors to explicitly indicate guest or shadow
 pte

Since the guest and host ptes can have wildly different format, adjust
the pte accessor names to indicate on which type of pte they operate on.

No functional changes.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 16 ++++++++--------
 arch/x86/kvm/mmu.h         |  2 +-
 arch/x86/kvm/paging_tmpl.h | 22 +++++++++++-----------
 arch/x86/kvm/x86.c         |  2 +-
 4 files changed, 21 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 8f2cb29db2f..a039e6bc21f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -240,12 +240,12 @@ static int is_writeble_pte(unsigned long pte)
 	return pte & PT_WRITABLE_MASK;
 }
 
-static int is_dirty_pte(unsigned long pte)
+static int is_dirty_gpte(unsigned long pte)
 {
 	return pte & PT_DIRTY_MASK;
 }
 
-static int is_rmap_pte(u64 pte)
+static int is_rmap_spte(u64 pte)
 {
 	return is_shadow_present_pte(pte);
 }
@@ -502,7 +502,7 @@ static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	unsigned long *rmapp;
 	int i, count = 0;
 
-	if (!is_rmap_pte(*spte))
+	if (!is_rmap_spte(*spte))
 		return count;
 	gfn = unalias_gfn(vcpu->kvm, gfn);
 	sp = page_header(__pa(spte));
@@ -567,7 +567,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 	unsigned long *rmapp;
 	int i;
 
-	if (!is_rmap_pte(*spte))
+	if (!is_rmap_spte(*spte))
 		return;
 	sp = page_header(__pa(spte));
 	pfn = spte_to_pfn(*spte);
@@ -1769,7 +1769,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		 __func__, *shadow_pte, pt_access,
 		 write_fault, user_fault, gfn);
 
-	if (is_rmap_pte(*shadow_pte)) {
+	if (is_rmap_spte(*shadow_pte)) {
 		/*
 		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
 		 * the parent of the now unreachable PTE.
@@ -1805,7 +1805,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 	page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
 	if (!was_rmapped) {
 		rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
-		if (!is_rmap_pte(*shadow_pte))
+		if (!is_rmap_spte(*shadow_pte))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
 			rmap_recycle(vcpu, gfn, largepage);
@@ -1984,7 +1984,7 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 		ASSERT(!VALID_PAGE(root));
 		if (vcpu->arch.mmu.root_level == PT32E_ROOT_LEVEL) {
 			pdptr = kvm_pdptr_read(vcpu, i);
-			if (!is_present_pte(pdptr)) {
+			if (!is_present_gpte(pdptr)) {
 				vcpu->arch.mmu.pae_root[i] = 0;
 				continue;
 			}
@@ -2475,7 +2475,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		if ((bytes == 4) && (gpa % 4 == 0))
 			memcpy((void *)&gpte, new, 4);
 	}
-	if (!is_present_pte(gpte))
+	if (!is_present_gpte(gpte))
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 3494a2fb136..016bf7183e9 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -75,7 +75,7 @@ static inline int is_paging(struct kvm_vcpu *vcpu)
 	return vcpu->arch.cr0 & X86_CR0_PG;
 }
 
-static inline int is_present_pte(unsigned long pte)
+static inline int is_present_gpte(unsigned long pte)
 {
 	return pte & PT_PRESENT_MASK;
 }
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 4cb1dbfd7c2..238a193bbf5 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -132,7 +132,7 @@ walk:
 #if PTTYPE == 64
 	if (!is_long_mode(vcpu)) {
 		pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
-		if (!is_present_pte(pte))
+		if (!is_present_gpte(pte))
 			goto not_present;
 		--walker->level;
 	}
@@ -155,7 +155,7 @@ walk:
 
 		kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
 
-		if (!is_present_pte(pte))
+		if (!is_present_gpte(pte))
 			goto not_present;
 
 		rsvd_fault = is_rsvd_bits_set(vcpu, pte, walker->level);
@@ -205,7 +205,7 @@ walk:
 		--walker->level;
 	}
 
-	if (write_fault && !is_dirty_pte(pte)) {
+	if (write_fault && !is_dirty_gpte(pte)) {
 		bool ret;
 
 		mark_page_dirty(vcpu->kvm, table_gfn);
@@ -252,7 +252,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
-		if (!is_present_pte(gpte))
+		if (!is_present_gpte(gpte))
 			set_shadow_pte(spte, shadow_notrap_nonpresent_pte);
 		return;
 	}
@@ -289,7 +289,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 	pt_element_t curr_pte;
 	struct kvm_shadow_walk_iterator iterator;
 
-	if (!is_present_pte(gw->ptes[gw->level - 1]))
+	if (!is_present_gpte(gw->ptes[gw->level - 1]))
 		return NULL;
 
 	for_each_shadow_entry(vcpu, addr, iterator) {
@@ -318,7 +318,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		if (level == PT_DIRECTORY_LEVEL
 		    && gw->level == PT_DIRECTORY_LEVEL) {
 			direct = 1;
-			if (!is_dirty_pte(gw->ptes[level - 1]))
+			if (!is_dirty_gpte(gw->ptes[level - 1]))
 				access &= ~ACC_WRITE_MASK;
 			table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
 		} else {
@@ -489,7 +489,7 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 	if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte,
 				  sizeof(pt_element_t)))
 		return;
-	if (is_present_pte(gpte) && (gpte & PT_ACCESSED_MASK)) {
+	if (is_present_gpte(gpte) && (gpte & PT_ACCESSED_MASK)) {
 		if (mmu_topup_memory_caches(vcpu))
 			return;
 		kvm_mmu_pte_write(vcpu, pte_gpa, (const u8 *)&gpte,
@@ -536,7 +536,7 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, pt, sizeof pt);
 		pte_gpa += ARRAY_SIZE(pt) * sizeof(pt_element_t);
 		for (j = 0; j < ARRAY_SIZE(pt); ++j)
-			if (r || is_present_pte(pt[j]))
+			if (r || is_present_gpte(pt[j]))
 				sp->spt[i+j] = shadow_trap_nonpresent_pte;
 			else
 				sp->spt[i+j] = shadow_notrap_nonpresent_pte;
@@ -574,12 +574,12 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 					  sizeof(pt_element_t)))
 			return -EINVAL;
 
-		if (gpte_to_gfn(gpte) != gfn || !is_present_pte(gpte) ||
+		if (gpte_to_gfn(gpte) != gfn || !is_present_gpte(gpte) ||
 		    !(gpte & PT_ACCESSED_MASK)) {
 			u64 nonpresent;
 
 			rmap_remove(vcpu->kvm, &sp->spt[i]);
-			if (is_present_pte(gpte))
+			if (is_present_gpte(gpte))
 				nonpresent = shadow_trap_nonpresent_pte;
 			else
 				nonpresent = shadow_notrap_nonpresent_pte;
@@ -590,7 +590,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		nr_present++;
 		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
 		set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
-			 is_dirty_pte(gpte), 0, gfn,
+			 is_dirty_gpte(gpte), 0, gfn,
 			 spte_to_pfn(sp->spt[i]), true, false);
 	}
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 05cbe83c74e..e877efa3762 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -237,7 +237,7 @@ int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
 		goto out;
 	}
 	for (i = 0; i < ARRAY_SIZE(pdpte); ++i) {
-		if (is_present_pte(pdpte[i]) &&
+		if (is_present_gpte(pdpte[i]) &&
 		    (pdpte[i] & vcpu->arch.mmu.rsvd_bits_mask[0][2])) {
 			ret = 0;
 			goto out;
-- 
cgit v1.2.3


From d555c333aa544b222fe077adcd5dfea024b2c913 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 10 Jun 2009 14:24:23 +0300
Subject: KVM: MMU: s/shadow_pte/spte/

We use shadow_pte and spte inconsistently, switch to the shorter spelling.

Rename set_shadow_pte() to __set_spte() to avoid a conflict with the
existing set_spte(), and to indicate its lowlevelness.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 102 ++++++++++++++++++++++-----------------------
 arch/x86/kvm/paging_tmpl.h |  16 +++----
 2 files changed, 59 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index a039e6bc21f..d443a421ca3 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -143,7 +143,7 @@ module_param(oos_shadow, bool, 0644);
 #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 
 struct kvm_rmap_desc {
-	u64 *shadow_ptes[RMAP_EXT];
+	u64 *sptes[RMAP_EXT];
 	struct kvm_rmap_desc *more;
 };
 
@@ -262,7 +262,7 @@ static gfn_t pse36_gfn_delta(u32 gpte)
 	return (gpte & PT32_DIR_PSE36_MASK) << shift;
 }
 
-static void set_shadow_pte(u64 *sptep, u64 spte)
+static void __set_spte(u64 *sptep, u64 spte)
 {
 #ifdef CONFIG_X86_64
 	set_64bit((unsigned long *)sptep, spte);
@@ -514,23 +514,23 @@ static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	} else if (!(*rmapp & 1)) {
 		rmap_printk("rmap_add: %p %llx 1->many\n", spte, *spte);
 		desc = mmu_alloc_rmap_desc(vcpu);
-		desc->shadow_ptes[0] = (u64 *)*rmapp;
-		desc->shadow_ptes[1] = spte;
+		desc->sptes[0] = (u64 *)*rmapp;
+		desc->sptes[1] = spte;
 		*rmapp = (unsigned long)desc | 1;
 	} else {
 		rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
 		desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
-		while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
+		while (desc->sptes[RMAP_EXT-1] && desc->more) {
 			desc = desc->more;
 			count += RMAP_EXT;
 		}
-		if (desc->shadow_ptes[RMAP_EXT-1]) {
+		if (desc->sptes[RMAP_EXT-1]) {
 			desc->more = mmu_alloc_rmap_desc(vcpu);
 			desc = desc->more;
 		}
-		for (i = 0; desc->shadow_ptes[i]; ++i)
+		for (i = 0; desc->sptes[i]; ++i)
 			;
-		desc->shadow_ptes[i] = spte;
+		desc->sptes[i] = spte;
 	}
 	return count;
 }
@@ -542,14 +542,14 @@ static void rmap_desc_remove_entry(unsigned long *rmapp,
 {
 	int j;
 
-	for (j = RMAP_EXT - 1; !desc->shadow_ptes[j] && j > i; --j)
+	for (j = RMAP_EXT - 1; !desc->sptes[j] && j > i; --j)
 		;
-	desc->shadow_ptes[i] = desc->shadow_ptes[j];
-	desc->shadow_ptes[j] = NULL;
+	desc->sptes[i] = desc->sptes[j];
+	desc->sptes[j] = NULL;
 	if (j != 0)
 		return;
 	if (!prev_desc && !desc->more)
-		*rmapp = (unsigned long)desc->shadow_ptes[0];
+		*rmapp = (unsigned long)desc->sptes[0];
 	else
 		if (prev_desc)
 			prev_desc->more = desc->more;
@@ -594,8 +594,8 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 		desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
 		prev_desc = NULL;
 		while (desc) {
-			for (i = 0; i < RMAP_EXT && desc->shadow_ptes[i]; ++i)
-				if (desc->shadow_ptes[i] == spte) {
+			for (i = 0; i < RMAP_EXT && desc->sptes[i]; ++i)
+				if (desc->sptes[i] == spte) {
 					rmap_desc_remove_entry(rmapp,
 							       desc, i,
 							       prev_desc);
@@ -626,10 +626,10 @@ static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte)
 	prev_desc = NULL;
 	prev_spte = NULL;
 	while (desc) {
-		for (i = 0; i < RMAP_EXT && desc->shadow_ptes[i]; ++i) {
+		for (i = 0; i < RMAP_EXT && desc->sptes[i]; ++i) {
 			if (prev_spte == spte)
-				return desc->shadow_ptes[i];
-			prev_spte = desc->shadow_ptes[i];
+				return desc->sptes[i];
+			prev_spte = desc->sptes[i];
 		}
 		desc = desc->more;
 	}
@@ -651,7 +651,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 		BUG_ON(!(*spte & PT_PRESENT_MASK));
 		rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte);
 		if (is_writeble_pte(*spte)) {
-			set_shadow_pte(spte, *spte & ~PT_WRITABLE_MASK);
+			__set_spte(spte, *spte & ~PT_WRITABLE_MASK);
 			write_protected = 1;
 		}
 		spte = rmap_next(kvm, rmapp, spte);
@@ -675,7 +675,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 		if (is_writeble_pte(*spte)) {
 			rmap_remove(kvm, spte);
 			--kvm->stat.lpages;
-			set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+			__set_spte(spte, shadow_trap_nonpresent_pte);
 			spte = NULL;
 			write_protected = 1;
 		}
@@ -694,7 +694,7 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
 		BUG_ON(!(*spte & PT_PRESENT_MASK));
 		rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
 		rmap_remove(kvm, spte);
-		set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+		__set_spte(spte, shadow_trap_nonpresent_pte);
 		need_tlb_flush = 1;
 	}
 	return need_tlb_flush;
@@ -1369,7 +1369,7 @@ static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
 		}
 		BUG_ON(!parent_pte);
 		kvm_mmu_put_page(sp, parent_pte);
-		set_shadow_pte(parent_pte, shadow_trap_nonpresent_pte);
+		__set_spte(parent_pte, shadow_trap_nonpresent_pte);
 	}
 }
 
@@ -1517,7 +1517,7 @@ static void mmu_convert_notrap(struct kvm_mmu_page *sp)
 
 	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
 		if (pt[i] == shadow_notrap_nonpresent_pte)
-			set_shadow_pte(&pt[i], shadow_trap_nonpresent_pte);
+			__set_spte(&pt[i], shadow_trap_nonpresent_pte);
 	}
 }
 
@@ -1683,7 +1683,7 @@ static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
 	return 0;
 }
 
-static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int user_fault,
 		    int write_fault, int dirty, int largepage,
 		    gfn_t gfn, pfn_t pfn, bool speculative,
@@ -1733,7 +1733,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		 * is responsibility of mmu_get_page / kvm_sync_page.
 		 * Same reasoning can be applied to dirty page accounting.
 		 */
-		if (!can_unsync && is_writeble_pte(*shadow_pte))
+		if (!can_unsync && is_writeble_pte(*sptep))
 			goto set_pte;
 
 		if (mmu_need_write_protect(vcpu, gfn, can_unsync)) {
@@ -1750,62 +1750,62 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		mark_page_dirty(vcpu->kvm, gfn);
 
 set_pte:
-	set_shadow_pte(shadow_pte, spte);
+	__set_spte(sptep, spte);
 	return ret;
 }
 
-static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 			 unsigned pt_access, unsigned pte_access,
 			 int user_fault, int write_fault, int dirty,
 			 int *ptwrite, int largepage, gfn_t gfn,
 			 pfn_t pfn, bool speculative)
 {
 	int was_rmapped = 0;
-	int was_writeble = is_writeble_pte(*shadow_pte);
+	int was_writeble = is_writeble_pte(*sptep);
 	int rmap_count;
 
 	pgprintk("%s: spte %llx access %x write_fault %d"
 		 " user_fault %d gfn %lx\n",
-		 __func__, *shadow_pte, pt_access,
+		 __func__, *sptep, pt_access,
 		 write_fault, user_fault, gfn);
 
-	if (is_rmap_spte(*shadow_pte)) {
+	if (is_rmap_spte(*sptep)) {
 		/*
 		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
 		 * the parent of the now unreachable PTE.
 		 */
-		if (largepage && !is_large_pte(*shadow_pte)) {
+		if (largepage && !is_large_pte(*sptep)) {
 			struct kvm_mmu_page *child;
-			u64 pte = *shadow_pte;
+			u64 pte = *sptep;
 
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
-			mmu_page_remove_parent_pte(child, shadow_pte);
-		} else if (pfn != spte_to_pfn(*shadow_pte)) {
+			mmu_page_remove_parent_pte(child, sptep);
+		} else if (pfn != spte_to_pfn(*sptep)) {
 			pgprintk("hfn old %lx new %lx\n",
-				 spte_to_pfn(*shadow_pte), pfn);
-			rmap_remove(vcpu->kvm, shadow_pte);
+				 spte_to_pfn(*sptep), pfn);
+			rmap_remove(vcpu->kvm, sptep);
 		} else
 			was_rmapped = 1;
 	}
-	if (set_spte(vcpu, shadow_pte, pte_access, user_fault, write_fault,
+	if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
 		      dirty, largepage, gfn, pfn, speculative, true)) {
 		if (write_fault)
 			*ptwrite = 1;
 		kvm_x86_ops->tlb_flush(vcpu);
 	}
 
-	pgprintk("%s: setting spte %llx\n", __func__, *shadow_pte);
+	pgprintk("%s: setting spte %llx\n", __func__, *sptep);
 	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
-		 is_large_pte(*shadow_pte)? "2MB" : "4kB",
-		 is_present_pte(*shadow_pte)?"RW":"R", gfn,
-		 *shadow_pte, shadow_pte);
-	if (!was_rmapped && is_large_pte(*shadow_pte))
+		 is_large_pte(*sptep)? "2MB" : "4kB",
+		 is_present_pte(*sptep)?"RW":"R", gfn,
+		 *shadow_pte, sptep);
+	if (!was_rmapped && is_large_pte(*sptep))
 		++vcpu->kvm->stat.lpages;
 
-	page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
+	page_header_update_slot(vcpu->kvm, sptep, gfn);
 	if (!was_rmapped) {
-		rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
-		if (!is_rmap_spte(*shadow_pte))
+		rmap_count = rmap_add(vcpu, sptep, gfn, largepage);
+		if (!is_rmap_spte(*sptep))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
 			rmap_recycle(vcpu, gfn, largepage);
@@ -1816,7 +1816,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 			kvm_release_pfn_clean(pfn);
 	}
 	if (speculative) {
-		vcpu->arch.last_pte_updated = shadow_pte;
+		vcpu->arch.last_pte_updated = sptep;
 		vcpu->arch.last_pte_gfn = gfn;
 	}
 }
@@ -1854,10 +1854,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 				return -ENOMEM;
 			}
 
-			set_shadow_pte(iterator.sptep,
-				       __pa(sp->spt)
-				       | PT_PRESENT_MASK | PT_WRITABLE_MASK
-				       | shadow_user_mask | shadow_x_mask);
+			__set_spte(iterator.sptep,
+				   __pa(sp->spt)
+				   | PT_PRESENT_MASK | PT_WRITABLE_MASK
+				   | shadow_user_mask | shadow_x_mask);
 		}
 	}
 	return pt_write;
@@ -2389,7 +2389,7 @@ static void mmu_pte_write_zap_pte(struct kvm_vcpu *vcpu,
 			mmu_page_remove_parent_pte(child, spte);
 		}
 	}
-	set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+	__set_spte(spte, shadow_trap_nonpresent_pte);
 	if (is_large_pte(pte))
 		--vcpu->kvm->stat.lpages;
 }
@@ -3125,7 +3125,7 @@ static int count_rmaps(struct kvm_vcpu *vcpu)
 			d = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
 			while (d) {
 				for (k = 0; k < RMAP_EXT; ++k)
-					if (d->shadow_ptes[k])
+					if (d->sptes[k])
 						++nmaps;
 					else
 						break;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 238a193bbf5..322e8113aee 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -253,7 +253,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
 		if (!is_present_gpte(gpte))
-			set_shadow_pte(spte, shadow_notrap_nonpresent_pte);
+			__set_spte(spte, shadow_notrap_nonpresent_pte);
 		return;
 	}
 	pgprintk("%s: gpte %llx spte %p\n", __func__, (u64)gpte, spte);
@@ -311,7 +311,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 
 		if (is_large_pte(*sptep)) {
 			rmap_remove(vcpu->kvm, sptep);
-			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
 			kvm_flush_remote_tlbs(vcpu->kvm);
 		}
 
@@ -369,7 +369,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int user_fault = error_code & PFERR_USER_MASK;
 	int fetch_fault = error_code & PFERR_FETCH_MASK;
 	struct guest_walker walker;
-	u64 *shadow_pte;
+	u64 *sptep;
 	int write_pt = 0;
 	int r;
 	pfn_t pfn;
@@ -422,11 +422,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	if (mmu_notifier_retry(vcpu, mmu_seq))
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
-	shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
-				  largepage, &write_pt, pfn);
+	sptep = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
+			     largepage, &write_pt, pfn);
 
 	pgprintk("%s: shadow pte %p %llx ptwrite %d\n", __func__,
-		 shadow_pte, *shadow_pte, write_pt);
+		 sptep, *sptep, write_pt);
 
 	if (!write_pt)
 		vcpu->arch.last_pt_write_count = 0; /* reset fork detector */
@@ -472,7 +472,7 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 					--vcpu->kvm->stat.lpages;
 				need_flush = 1;
 			}
-			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
 			break;
 		}
 
@@ -583,7 +583,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 				nonpresent = shadow_trap_nonpresent_pte;
 			else
 				nonpresent = shadow_notrap_nonpresent_pte;
-			set_shadow_pte(&sp->spt[i], nonpresent);
+			__set_spte(&sp->spt[i], nonpresent);
 			continue;
 		}
 
-- 
cgit v1.2.3


From c5af89b68abb26eea5e745f33228f4d672f115e5 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:26 +0300
Subject: KVM: Introduce kvm_vcpu_is_bsp() function.

Use it instead of open code "vcpu_id zero is BSP" assumption.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c | 2 +-
 arch/ia64/kvm/vcpu.c     | 2 +-
 arch/x86/kvm/i8254.c     | 4 ++--
 arch/x86/kvm/i8259.c     | 6 +++---
 arch/x86/kvm/lapic.c     | 7 ++++---
 arch/x86/kvm/svm.c       | 4 ++--
 arch/x86/kvm/vmx.c       | 6 +++---
 arch/x86/kvm/x86.c       | 4 ++--
 8 files changed, 18 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 8dde36953af..4082665ace0 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1216,7 +1216,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	if (IS_ERR(vmm_vcpu))
 		return PTR_ERR(vmm_vcpu);
 
-	if (vcpu->vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(vcpu)) {
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
 		/*Set entry address for first run.*/
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index cc406d064a0..61a3320b62c 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -830,7 +830,7 @@ static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val)
 
 	kvm = (struct kvm *)KVM_VM_BASE;
 
-	if (vcpu->vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(vcpu)) {
 		for (i = 0; i < kvm->arch.online_vcpus; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3837db65d33..008a8318506 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -231,7 +231,7 @@ int pit_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
 
-	if (pit && vcpu->vcpu_id == 0 && pit->pit_state.irq_ack)
+	if (pit && kvm_vcpu_is_bsp(vcpu) && pit->pit_state.irq_ack)
 		return atomic_read(&pit->pit_state.pit_timer.pending);
 	return 0;
 }
@@ -252,7 +252,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
 	struct hrtimer *timer;
 
-	if (vcpu->vcpu_id != 0 || !pit)
+	if (!kvm_vcpu_is_bsp(vcpu) || !pit)
 		return;
 
 	timer = &pit->pit_state.pit_timer.timer;
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index bf94a45f4f8..148c52a608d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -57,7 +57,7 @@ static void pic_unlock(struct kvm_pic *s)
 	}
 
 	if (wakeup) {
-		vcpu = s->kvm->vcpus[0];
+		vcpu = s->kvm->bsp_vcpu;
 		if (vcpu)
 			kvm_vcpu_kick(vcpu);
 	}
@@ -254,7 +254,7 @@ void kvm_pic_reset(struct kvm_kpic_state *s)
 {
 	int irq, irqbase, n;
 	struct kvm *kvm = s->pics_state->irq_request_opaque;
-	struct kvm_vcpu *vcpu0 = kvm->vcpus[0];
+	struct kvm_vcpu *vcpu0 = kvm->bsp_vcpu;
 
 	if (s == &s->pics_state->pics[0])
 		irqbase = 0;
@@ -512,7 +512,7 @@ static void picdev_read(struct kvm_io_device *this,
 static void pic_irq_request(void *opaque, int level)
 {
 	struct kvm *kvm = opaque;
-	struct kvm_vcpu *vcpu = kvm->vcpus[0];
+	struct kvm_vcpu *vcpu = kvm->bsp_vcpu;
 	struct kvm_pic *s = pic_irqchip(kvm);
 	int irq = pic_get_irq(&s->pics[0]);
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 44f20cdb570..b0661300eb2 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -793,7 +793,8 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 		vcpu->arch.apic_base = value;
 		return;
 	}
-	if (apic->vcpu->vcpu_id)
+
+	if (!kvm_vcpu_is_bsp(apic->vcpu))
 		value &= ~MSR_IA32_APICBASE_BSP;
 
 	vcpu->arch.apic_base = value;
@@ -844,7 +845,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 	}
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
-	if (vcpu->vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(vcpu))
 		vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP;
 	apic_update_ppr(apic);
 
@@ -985,7 +986,7 @@ int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu)
 	u32 lvt0 = apic_get_reg(vcpu->arch.apic, APIC_LVT0);
 	int r = 0;
 
-	if (vcpu->vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(vcpu)) {
 		if (!apic_hw_enabled(vcpu->arch.apic))
 			r = 1;
 		if ((lvt0 & APIC_LVT_MASKED) == 0 &&
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 7749b0692cb..28b981409a8 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -642,7 +642,7 @@ static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
 
 	init_vmcb(svm);
 
-	if (vcpu->vcpu_id != 0) {
+	if (!kvm_vcpu_is_bsp(vcpu)) {
 		kvm_rip_write(vcpu, 0);
 		svm->vmcb->save.cs.base = svm->vcpu.arch.sipi_vector << 12;
 		svm->vmcb->save.cs.selector = svm->vcpu.arch.sipi_vector << 8;
@@ -706,7 +706,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	fx_init(&svm->vcpu);
 	svm->vcpu.fpu_active = 1;
 	svm->vcpu.arch.apic_base = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
-	if (svm->vcpu.vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(&svm->vcpu))
 		svm->vcpu.arch.apic_base |= MSR_IA32_APICBASE_BSP;
 
 	return &svm->vcpu;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ae682929a64..c08bb4cf372 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2411,7 +2411,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
 	kvm_set_cr8(&vmx->vcpu, 0);
 	msr = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
-	if (vmx->vcpu.vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(&vmx->vcpu))
 		msr |= MSR_IA32_APICBASE_BSP;
 	kvm_set_apic_base(&vmx->vcpu, msr);
 
@@ -2422,7 +2422,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	 * GUEST_CS_BASE should really be 0xffff0000, but VT vm86 mode
 	 * insists on having GUEST_CS_BASE == GUEST_CS_SELECTOR << 4.  Sigh.
 	 */
-	if (vmx->vcpu.vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(&vmx->vcpu)) {
 		vmcs_write16(GUEST_CS_SELECTOR, 0xf000);
 		vmcs_writel(GUEST_CS_BASE, 0x000f0000);
 	} else {
@@ -2451,7 +2451,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmcs_writel(GUEST_SYSENTER_EIP, 0);
 
 	vmcs_writel(GUEST_RFLAGS, 0x02);
-	if (vmx->vcpu.vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(&vmx->vcpu))
 		kvm_rip_write(vcpu, 0xfff0);
 	else
 		kvm_rip_write(vcpu, 0);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e877efa3762..d8adc1da76d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4330,7 +4330,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	/* Older userspace won't unhalt the vcpu on reset. */
-	if (vcpu->vcpu_id == 0 && kvm_rip_read(vcpu) == 0xfff0 &&
+	if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
 	    sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
 	    !(vcpu->arch.cr0 & X86_CR0_PE))
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
@@ -4601,7 +4601,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	kvm = vcpu->kvm;
 
 	vcpu->arch.mmu.root_hpa = INVALID_PAGE;
-	if (!irqchip_in_kernel(kvm) || vcpu->vcpu_id == 0)
+	if (!irqchip_in_kernel(kvm) || kvm_vcpu_is_bsp(vcpu))
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 	else
 		vcpu->arch.mp_state = KVM_MP_STATE_UNINITIALIZED;
-- 
cgit v1.2.3


From 1ed0ce000a6c20c36ec649e32fc24393ef418ed8 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:27 +0300
Subject: KVM: Use pointer to vcpu instead of vcpu_id in timer code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c     | 2 +-
 arch/x86/kvm/kvm_timer.h | 2 +-
 arch/x86/kvm/lapic.c     | 2 +-
 arch/x86/kvm/timer.c     | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 008a8318506..06d8f84ae8a 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -294,7 +294,7 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 	pt->timer.function = kvm_timer_fn;
 	pt->t_ops = &kpit_ops;
 	pt->kvm = ps->pit->kvm;
-	pt->vcpu_id = 0;
+	pt->vcpu = pt->kvm->bsp_vcpu;
 
 	atomic_set(&pt->pending, 0);
 	ps->irq_ack = 1;
diff --git a/arch/x86/kvm/kvm_timer.h b/arch/x86/kvm/kvm_timer.h
index 26bd6ba74e1..55c7524dda5 100644
--- a/arch/x86/kvm/kvm_timer.h
+++ b/arch/x86/kvm/kvm_timer.h
@@ -6,7 +6,7 @@ struct kvm_timer {
 	bool reinject;
 	struct kvm_timer_ops *t_ops;
 	struct kvm *kvm;
-	int vcpu_id;
+	struct kvm_vcpu *vcpu;
 };
 
 struct kvm_timer_ops {
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index b0661300eb2..b1694dc4572 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -950,7 +950,7 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu)
 	apic->lapic_timer.timer.function = kvm_timer_fn;
 	apic->lapic_timer.t_ops = &lapic_timer_ops;
 	apic->lapic_timer.kvm = vcpu->kvm;
-	apic->lapic_timer.vcpu_id = vcpu->vcpu_id;
+	apic->lapic_timer.vcpu = vcpu;
 
 	apic->base_address = APIC_DEFAULT_PHYS_BASE;
 	vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE;
diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 86dbac072d0..85cc743a820 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -33,7 +33,7 @@ enum hrtimer_restart kvm_timer_fn(struct hrtimer *data)
 	struct kvm_vcpu *vcpu;
 	struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
 
-	vcpu = ktimer->kvm->vcpus[ktimer->vcpu_id];
+	vcpu = ktimer->vcpu;
 	if (!vcpu)
 		return HRTIMER_NORESTART;
 
-- 
cgit v1.2.3


From 73880c80aa9c8dc353cd0ad26579023213cd5314 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:28 +0300
Subject: KVM: Break dependency between vcpu index in vcpus array and vcpu_id.

Archs are free to use vcpu_id as they see fit. For x86 it is used as
vcpu's apic id. New ioctl is added to configure boot vcpu id that was
assumed to be 0 till now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_host.h | 1 -
 arch/ia64/kvm/Kconfig            | 1 +
 arch/ia64/kvm/kvm-ia64.c         | 8 ++------
 arch/ia64/kvm/vcpu.c             | 2 +-
 arch/x86/kvm/Kconfig             | 1 +
 5 files changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 5f43697aed3..9cf1c4b1f92 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -465,7 +465,6 @@ struct kvm_arch {
 	unsigned long	metaphysical_rr4;
 	unsigned long	vmm_init_rr;
 
-	int		online_vcpus;
 	int		is_sn2;
 
 	struct kvm_ioapic *vioapic;
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index f922bbba379..cbadd8a6523 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -25,6 +25,7 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
+	select KVM_APIC_ARCHITECTURE
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 4082665ace0..d1f7bcda2c7 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -338,7 +338,7 @@ static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id,
 	union ia64_lid lid;
 	int i;
 
-	for (i = 0; i < kvm->arch.online_vcpus; i++) {
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
 		if (kvm->vcpus[i]) {
 			lid.val = VCPU_LID(kvm->vcpus[i]);
 			if (lid.id == id && lid.eid == eid)
@@ -412,7 +412,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	call_data.ptc_g_data = p->u.ptc_g_data;
 
-	for (i = 0; i < kvm->arch.online_vcpus; i++) {
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
 		if (!kvm->vcpus[i] || kvm->vcpus[i]->arch.mp_state ==
 						KVM_MP_STATE_UNINITIALIZED ||
 					vcpu == kvm->vcpus[i])
@@ -852,8 +852,6 @@ struct  kvm *kvm_arch_create_vm(void)
 
 	kvm_init_vm(kvm);
 
-	kvm->arch.online_vcpus = 0;
-
 	return kvm;
 
 }
@@ -1356,8 +1354,6 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 		goto fail;
 	}
 
-	kvm->arch.online_vcpus++;
-
 	return vcpu;
 fail:
 	return ERR_PTR(r);
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index 61a3320b62c..dce75b70cdd 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -831,7 +831,7 @@ static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val)
 	kvm = (struct kvm *)KVM_VM_BASE;
 
 	if (kvm_vcpu_is_bsp(vcpu)) {
-		for (i = 0; i < kvm->arch.online_vcpus; i++) {
+		for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
 			VMX(v, itc_offset) = itc_offset;
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8cd2a4efe23..7fbedfd34d6 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -27,6 +27,7 @@ config KVM
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_EVENTFD
+	select KVM_APIC_ARCHITECTURE
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
-- 
cgit v1.2.3


From 988a2cae6a3c0dea6df59808a935a9a697bfc28c Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:29 +0300
Subject: KVM: Use macro to iterate over vcpus.

[christian: remove unused variables on s390]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c   | 29 ++++++++++++++---------------
 arch/powerpc/kvm/powerpc.c | 16 ++++++++++------
 arch/s390/kvm/kvm-s390.c   | 31 +++++++++++++++----------------
 arch/x86/kvm/i8254.c       |  7 ++-----
 arch/x86/kvm/mmu.c         |  6 +++---
 arch/x86/kvm/x86.c         | 25 ++++++++++++-------------
 6 files changed, 56 insertions(+), 58 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d1f7bcda2c7..5c766bd82b0 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -337,13 +337,12 @@ static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id,
 {
 	union ia64_lid lid;
 	int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
-		if (kvm->vcpus[i]) {
-			lid.val = VCPU_LID(kvm->vcpus[i]);
-			if (lid.id == id && lid.eid == eid)
-				return kvm->vcpus[i];
-		}
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		lid.val = VCPU_LID(vcpu);
+		if (lid.id == id && lid.eid == eid)
+			return vcpu;
 	}
 
 	return NULL;
@@ -409,21 +408,21 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	struct kvm *kvm = vcpu->kvm;
 	struct call_data call_data;
 	int i;
+	struct kvm_vcpu *vcpui;
 
 	call_data.ptc_g_data = p->u.ptc_g_data;
 
-	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
-		if (!kvm->vcpus[i] || kvm->vcpus[i]->arch.mp_state ==
-						KVM_MP_STATE_UNINITIALIZED ||
-					vcpu == kvm->vcpus[i])
+	kvm_for_each_vcpu(i, vcpui, kvm) {
+		if (vcpui->arch.mp_state == KVM_MP_STATE_UNINITIALIZED ||
+				vcpu == vcpui)
 			continue;
 
-		if (waitqueue_active(&kvm->vcpus[i]->wq))
-			wake_up_interruptible(&kvm->vcpus[i]->wq);
+		if (waitqueue_active(&vcpui->wq))
+			wake_up_interruptible(&vcpui->wq);
 
-		if (kvm->vcpus[i]->cpu != -1) {
-			call_data.vcpu = kvm->vcpus[i];
-			smp_call_function_single(kvm->vcpus[i]->cpu,
+		if (vcpui->cpu != -1) {
+			call_data.vcpu = vcpui;
+			smp_call_function_single(vcpui->cpu,
 					vcpu_global_purge, &call_data, 1);
 		} else
 			printk(KERN_WARNING"kvm: Uninit vcpu received ipi!\n");
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2cf915e51e7..7ad30e0a1b9 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -122,13 +122,17 @@ struct kvm *kvm_arch_create_vm(void)
 static void kvmppc_free_vcpus(struct kvm *kvm)
 {
 	unsigned int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			kvm_arch_vcpu_free(kvm->vcpus[i]);
-			kvm->vcpus[i] = NULL;
-		}
-	}
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_arch_vcpu_free(vcpu);
+
+	mutex_lock(&kvm->lock);
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+		kvm->vcpus[i] = NULL;
+
+	atomic_set(&kvm->online_vcpus, 0);
+	mutex_unlock(&kvm->lock);
 }
 
 void kvm_arch_sync_events(struct kvm *kvm)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 098bfa6fbdf..07ced89740d 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -211,13 +211,17 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 static void kvm_free_vcpus(struct kvm *kvm)
 {
 	unsigned int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			kvm_arch_vcpu_destroy(kvm->vcpus[i]);
-			kvm->vcpus[i] = NULL;
-		}
-	}
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_arch_vcpu_destroy(vcpu);
+
+	mutex_lock(&kvm->lock);
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+		kvm->vcpus[i] = NULL;
+
+	atomic_set(&kvm->online_vcpus, 0);
+	mutex_unlock(&kvm->lock);
 }
 
 void kvm_arch_sync_events(struct kvm *kvm)
@@ -314,8 +318,6 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	BUG_ON(!kvm->arch.sca);
 	if (!kvm->arch.sca->cpu[id].sda)
 		kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block;
-	else
-		BUG_ON(!kvm->vcpus[id]); /* vcpu does already exist */
 	vcpu->arch.sie_block->scaoh = (__u32)(((__u64)kvm->arch.sca) >> 32);
 	vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca;
 
@@ -683,6 +685,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 				int user_alloc)
 {
 	int i;
+	struct kvm_vcpu *vcpu;
 
 	/* A few sanity checks. We can have exactly one memory slot which has
 	   to start at guest virtual zero and which has to be located at a
@@ -707,14 +710,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 		return -EINVAL;
 
 	/* request update of sie control block for all available vcpus */
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			if (test_and_set_bit(KVM_REQ_MMU_RELOAD,
-						&kvm->vcpus[i]->requests))
-				continue;
-			kvm_s390_inject_sigp_stop(kvm->vcpus[i],
-						  ACTION_RELOADVCPU_ON_STOP);
-		}
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (test_and_set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
+			continue;
+		kvm_s390_inject_sigp_stop(vcpu, ACTION_RELOADVCPU_ON_STOP);
 	}
 
 	return 0;
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 06d8f84ae8a..15fc95b2fc0 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -669,11 +669,8 @@ static void __inject_pit_timer_intr(struct kvm *kvm)
 	 * VCPU0, and only if its LVT0 is in EXTINT mode.
 	 */
 	if (kvm->arch.vapics_in_nmi_mode > 0)
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = kvm->vcpus[i];
-			if (vcpu)
-				kvm_apic_nmi_wd_deliver(vcpu);
-		}
+		kvm_for_each_vcpu(i, vcpu, kvm)
+			kvm_apic_nmi_wd_deliver(vcpu);
 }
 
 void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index d443a421ca3..5f97dbd2429 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1347,10 +1347,10 @@ static void kvm_mmu_put_page(struct kvm_mmu_page *sp, u64 *parent_pte)
 static void kvm_mmu_reset_last_pte_updated(struct kvm *kvm)
 {
 	int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < KVM_MAX_VCPUS; ++i)
-		if (kvm->vcpus[i])
-			kvm->vcpus[i]->arch.last_pte_updated = NULL;
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		vcpu->arch.last_pte_updated = NULL;
 }
 
 static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d8adc1da76d..89862a80e32 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2946,10 +2946,7 @@ static int kvmclock_cpufreq_notifier(struct notifier_block *nb, unsigned long va
 
 	spin_lock(&kvm_lock);
 	list_for_each_entry(kvm, &vm_list, vm_list) {
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = kvm->vcpus[i];
-			if (!vcpu)
-				continue;
+		kvm_for_each_vcpu(i, vcpu, kvm) {
 			if (vcpu->cpu != freq->cpu)
 				continue;
 			if (!kvm_request_guest_time_update(vcpu))
@@ -4678,20 +4675,22 @@ static void kvm_unload_vcpu_mmu(struct kvm_vcpu *vcpu)
 static void kvm_free_vcpus(struct kvm *kvm)
 {
 	unsigned int i;
+	struct kvm_vcpu *vcpu;
 
 	/*
 	 * Unpin any mmu pages first.
 	 */
-	for (i = 0; i < KVM_MAX_VCPUS; ++i)
-		if (kvm->vcpus[i])
-			kvm_unload_vcpu_mmu(kvm->vcpus[i]);
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			kvm_arch_vcpu_free(kvm->vcpus[i]);
-			kvm->vcpus[i] = NULL;
-		}
-	}
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_unload_vcpu_mmu(vcpu);
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_arch_vcpu_free(vcpu);
+
+	mutex_lock(&kvm->lock);
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+		kvm->vcpus[i] = NULL;
 
+	atomic_set(&kvm->online_vcpus, 0);
+	mutex_unlock(&kvm->lock);
 }
 
 void kvm_arch_sync_events(struct kvm *kvm)
-- 
cgit v1.2.3


From 3f5d18a96577fd78277e08c467041573b9a65eaf Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 11 Jun 2009 15:43:28 +0300
Subject: KVM: Return to userspace on emulation failure

Instead of mindlessly retrying to execute the instruction, report the
failure to userspace.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5f97dbd2429..b6e4cda7704 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2673,8 +2673,9 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code)
 		++vcpu->stat.mmio_exits;
 		return 0;
 	case EMULATE_FAIL:
-		kvm_report_emulation_failure(vcpu, "pagetable");
-		return 1;
+		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+		return 0;
 	default:
 		BUG();
 	}
-- 
cgit v1.2.3


From 776e6633363b5616be6fa4493a8b70ef8e2ea04b Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:03 -0300
Subject: KVM: MMU: introduce is_last_spte helper

Hiding some of the last largepage / level interaction (which is useful
for gbpages and for zero based levels).

Also merge the PT_PAGE_TABLE_LEVEL clearing loop in unlink_children.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b6e4cda7704..f85d9953a62 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -250,6 +250,15 @@ static int is_rmap_spte(u64 pte)
 	return is_shadow_present_pte(pte);
 }
 
+static int is_last_spte(u64 pte, int level)
+{
+	if (level == PT_PAGE_TABLE_LEVEL)
+		return 1;
+	if (level == PT_DIRECTORY_LEVEL && is_large_pte(pte))
+		return 1;
+	return 0;
+}
+
 static pfn_t spte_to_pfn(u64 pte)
 {
 	return (pte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
@@ -1313,25 +1322,17 @@ static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 
 	pt = sp->spt;
 
-	if (sp->role.level == PT_PAGE_TABLE_LEVEL) {
-		for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
-			if (is_shadow_present_pte(pt[i]))
-				rmap_remove(kvm, &pt[i]);
-			pt[i] = shadow_trap_nonpresent_pte;
-		}
-		return;
-	}
-
 	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
 		ent = pt[i];
 
 		if (is_shadow_present_pte(ent)) {
-			if (!is_large_pte(ent)) {
+			if (!is_last_spte(ent, sp->role.level)) {
 				ent &= PT64_BASE_ADDR_MASK;
 				mmu_page_remove_parent_pte(page_header(ent),
 							   &pt[i]);
 			} else {
-				--kvm->stat.lpages;
+				if (is_large_pte(ent))
+					--kvm->stat.lpages;
 				rmap_remove(kvm, &pt[i]);
 			}
 		}
@@ -2381,8 +2382,7 @@ static void mmu_pte_write_zap_pte(struct kvm_vcpu *vcpu,
 
 	pte = *spte;
 	if (is_shadow_present_pte(pte)) {
-		if (sp->role.level == PT_PAGE_TABLE_LEVEL ||
-		    is_large_pte(pte))
+		if (is_last_spte(pte, sp->role.level))
 			rmap_remove(vcpu->kvm, spte);
 		else {
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
-- 
cgit v1.2.3


From 08a3732bf2e68048c9166e929ca2115127a412ab Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:04 -0300
Subject: KVM: MMU audit: update count_writable_mappings / count_rmaps

Under testing, count_writable_mappings returns a value that is 2 integers
larger than what count_rmaps returns.

Suspicion is that either of the two functions is counting a duplicate (either
positively or negatively).

Modifying check_writable_mappings_rmap to check for rmap existance on
all present MMU pages fails to trigger an error, which should keep Avi
happy.

Also introduce mmu_spte_walk to invoke a callback on all present sptes visible
to the current vcpu, might be useful in the future.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 104 +++++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 94 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f85d9953a62..fd5579cc8ab 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3045,6 +3045,55 @@ static gva_t canonicalize(gva_t gva)
 	return gva;
 }
 
+
+typedef void (*inspect_spte_fn) (struct kvm *kvm, struct kvm_mmu_page *sp,
+				 u64 *sptep);
+
+static void __mmu_spte_walk(struct kvm *kvm, struct kvm_mmu_page *sp,
+			    inspect_spte_fn fn)
+{
+	int i;
+
+	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
+		u64 ent = sp->spt[i];
+
+		if (is_shadow_present_pte(ent)) {
+			if (sp->role.level > 1 && !is_large_pte(ent)) {
+				struct kvm_mmu_page *child;
+				child = page_header(ent & PT64_BASE_ADDR_MASK);
+				__mmu_spte_walk(kvm, child, fn);
+			}
+			if (sp->role.level == 1)
+				fn(kvm, sp, &sp->spt[i]);
+		}
+	}
+}
+
+static void mmu_spte_walk(struct kvm_vcpu *vcpu, inspect_spte_fn fn)
+{
+	int i;
+	struct kvm_mmu_page *sp;
+
+	if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+		return;
+	if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
+		hpa_t root = vcpu->arch.mmu.root_hpa;
+		sp = page_header(root);
+		__mmu_spte_walk(vcpu->kvm, sp, fn);
+		return;
+	}
+	for (i = 0; i < 4; ++i) {
+		hpa_t root = vcpu->arch.mmu.pae_root[i];
+
+		if (root && VALID_PAGE(root)) {
+			root &= PT64_BASE_ADDR_MASK;
+			sp = page_header(root);
+			__mmu_spte_walk(vcpu->kvm, sp, fn);
+		}
+	}
+	return;
+}
+
 static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 				gva_t va, int level)
 {
@@ -3137,9 +3186,47 @@ static int count_rmaps(struct kvm_vcpu *vcpu)
 	return nmaps;
 }
 
-static int count_writable_mappings(struct kvm_vcpu *vcpu)
+void inspect_spte_has_rmap(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *sptep)
+{
+	unsigned long *rmapp;
+	struct kvm_mmu_page *rev_sp;
+	gfn_t gfn;
+
+	if (*sptep & PT_WRITABLE_MASK) {
+		rev_sp = page_header(__pa(sptep));
+		gfn = rev_sp->gfns[sptep - rev_sp->spt];
+
+		if (!gfn_to_memslot(kvm, gfn)) {
+			if (!printk_ratelimit())
+				return;
+			printk(KERN_ERR "%s: no memslot for gfn %ld\n",
+					 audit_msg, gfn);
+			printk(KERN_ERR "%s: index %ld of sp (gfn=%lx)\n",
+					audit_msg, sptep - rev_sp->spt,
+					rev_sp->gfn);
+			dump_stack();
+			return;
+		}
+
+		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt], 0);
+		if (!*rmapp) {
+			if (!printk_ratelimit())
+				return;
+			printk(KERN_ERR "%s: no rmap for writable spte %llx\n",
+					 audit_msg, *sptep);
+			dump_stack();
+		}
+	}
+
+}
+
+void audit_writable_sptes_have_rmaps(struct kvm_vcpu *vcpu)
+{
+	mmu_spte_walk(vcpu, inspect_spte_has_rmap);
+}
+
+static void check_writable_mappings_rmap(struct kvm_vcpu *vcpu)
 {
-	int nmaps = 0;
 	struct kvm_mmu_page *sp;
 	int i;
 
@@ -3156,20 +3243,16 @@ static int count_writable_mappings(struct kvm_vcpu *vcpu)
 				continue;
 			if (!(ent & PT_WRITABLE_MASK))
 				continue;
-			++nmaps;
+			inspect_spte_has_rmap(vcpu->kvm, sp, &pt[i]);
 		}
 	}
-	return nmaps;
+	return;
 }
 
 static void audit_rmap(struct kvm_vcpu *vcpu)
 {
-	int n_rmap = count_rmaps(vcpu);
-	int n_actual = count_writable_mappings(vcpu);
-
-	if (n_rmap != n_actual)
-		printk(KERN_ERR "%s: (%s) rmap %d actual %d\n",
-		       __func__, audit_msg, n_rmap, n_actual);
+	check_writable_mappings_rmap(vcpu);
+	count_rmaps(vcpu);
 }
 
 static void audit_write_protection(struct kvm_vcpu *vcpu)
@@ -3203,6 +3286,7 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg)
 	audit_rmap(vcpu);
 	audit_write_protection(vcpu);
 	audit_mappings(vcpu);
+	audit_writable_sptes_have_rmaps(vcpu);
 	dbg = olddbg;
 }
 
-- 
cgit v1.2.3


From e58b0f9e0e2c17112e375a3f0ca1ef7e57730f68 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:05 -0300
Subject: KVM: MMU audit: update audit_write_protection

- Unsync pages contain writable sptes in the rmap.
- rmaps do not exclusively contain writable sptes anymore.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index fd5579cc8ab..4c2585cab18 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3260,20 +3260,28 @@ static void audit_write_protection(struct kvm_vcpu *vcpu)
 	struct kvm_mmu_page *sp;
 	struct kvm_memory_slot *slot;
 	unsigned long *rmapp;
+	u64 *spte;
 	gfn_t gfn;
 
 	list_for_each_entry(sp, &vcpu->kvm->arch.active_mmu_pages, link) {
 		if (sp->role.direct)
 			continue;
+		if (sp->unsync)
+			continue;
 
 		gfn = unalias_gfn(vcpu->kvm, sp->gfn);
 		slot = gfn_to_memslot_unaliased(vcpu->kvm, sp->gfn);
 		rmapp = &slot->rmap[gfn - slot->base_gfn];
-		if (*rmapp)
-			printk(KERN_ERR "%s: (%s) shadow page has writable"
-			       " mappings: gfn %lx role %x\n",
+
+		spte = rmap_next(vcpu->kvm, rmapp, NULL);
+		while (spte) {
+			if (*spte & PT_WRITABLE_MASK)
+				printk(KERN_ERR "%s: (%s) shadow page has "
+				"writable mappings: gfn %lx role %x\n",
 			       __func__, audit_msg, sp->gfn,
 			       sp->role.word);
+			spte = rmap_next(vcpu->kvm, rmapp, spte);
+		}
 	}
 }
 
-- 
cgit v1.2.3


From 48fc03174b125238c541cf00acd5e9b9dff6b9ba Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:06 -0300
Subject: KVM: MMU audit: nontrapping ptes in nonleaf level

It is valid to set non leaf sptes as notrap.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 4c2585cab18..86433513fb7 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3109,12 +3109,7 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 
 		va = canonicalize(va);
 		if (level > 1) {
-			if (ent == shadow_notrap_nonpresent_pte)
-				printk(KERN_ERR "audit: (%s) nontrapping pte"
-				       " in nonleaf level: levels %d gva %lx"
-				       " level %d pte %llx\n", audit_msg,
-				       vcpu->arch.mmu.root_level, va, level, ent);
-			else
+			if (is_shadow_present_pte(ent))
 				audit_mappings_page(vcpu, ent, va, level - 1);
 		} else {
 			gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, va);
-- 
cgit v1.2.3


From 2aaf65e8c40468b198b709a765abe311f91c1a1d Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:07 -0300
Subject: KVM: MMU audit: audit_mappings tweaks

- Fail early in case gfn_to_pfn returns is_error_pfn.
- For the pre pte write case, avoid spurious "gva is valid but spte is notrap"
  messages (the emulation code does the guest write first, so this particular
  case is OK).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 86433513fb7..50fe8541ed3 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3117,6 +3117,11 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 			pfn_t pfn = gfn_to_pfn(vcpu->kvm, gfn);
 			hpa_t hpa = (hpa_t)pfn << PAGE_SHIFT;
 
+			if (is_error_pfn(pfn)) {
+				kvm_release_pfn_clean(pfn);
+				continue;
+			}
+
 			if (is_shadow_present_pte(ent)
 			    && (ent & PT64_BASE_ADDR_MASK) != hpa)
 				printk(KERN_ERR "xx audit error: (%s) levels %d"
@@ -3288,7 +3293,8 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg)
 	audit_msg = msg;
 	audit_rmap(vcpu);
 	audit_write_protection(vcpu);
-	audit_mappings(vcpu);
+	if (strcmp("pre pte write", audit_msg) != 0)
+		audit_mappings(vcpu);
 	audit_writable_sptes_have_rmaps(vcpu);
 	dbg = olddbg;
 }
-- 
cgit v1.2.3


From 2920d7285740582d6101f32c37d8d54f82531e1e Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:08 -0300
Subject: KVM: MMU audit: largepage handling

Make the audit code aware of largepages.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 50fe8541ed3..780ce3fe791 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3058,12 +3058,11 @@ static void __mmu_spte_walk(struct kvm *kvm, struct kvm_mmu_page *sp,
 		u64 ent = sp->spt[i];
 
 		if (is_shadow_present_pte(ent)) {
-			if (sp->role.level > 1 && !is_large_pte(ent)) {
+			if (!is_last_spte(ent, sp->role.level)) {
 				struct kvm_mmu_page *child;
 				child = page_header(ent & PT64_BASE_ADDR_MASK);
 				__mmu_spte_walk(kvm, child, fn);
-			}
-			if (sp->role.level == 1)
+			} else
 				fn(kvm, sp, &sp->spt[i]);
 		}
 	}
@@ -3108,10 +3107,9 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 			continue;
 
 		va = canonicalize(va);
-		if (level > 1) {
-			if (is_shadow_present_pte(ent))
-				audit_mappings_page(vcpu, ent, va, level - 1);
-		} else {
+		if (is_shadow_present_pte(ent) && !is_last_spte(ent, level))
+			audit_mappings_page(vcpu, ent, va, level - 1);
+		else {
 			gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, va);
 			gfn_t gfn = gpa >> PAGE_SHIFT;
 			pfn_t pfn = gfn_to_pfn(vcpu->kvm, gfn);
@@ -3208,7 +3206,8 @@ void inspect_spte_has_rmap(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *sptep)
 			return;
 		}
 
-		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt], 0);
+		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt],
+				    is_large_pte(*sptep));
 		if (!*rmapp) {
 			if (!printk_ratelimit())
 				return;
-- 
cgit v1.2.3


From 71db602322b1197e7951655c46339324b6208bf9 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Fri, 12 Jun 2009 22:01:29 +0200
Subject: KVM: Move performance counter MSR access interception to generic x86
 path

The performance counter MSRs are different for AMD and Intel CPUs and they
are chosen mainly by the CPUID vendor string. This patch catches writes to
all addresses (regardless of VMX/SVM path) and handles them in the generic
MSR handler routine. Writing a 0 into the event select register is something
we perfectly emulate ;-), so don't print out a warning to dmesg in this
case.
This fixes booting a 64bit Windows guest with an AMD CPUID on an Intel host.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 16 ----------------
 arch/x86/kvm/vmx.c | 12 ------------
 arch/x86/kvm/x86.c | 30 ++++++++++++++++++++++++++++++
 3 files changed, 30 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 28b981409a8..060aa9f5571 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2142,22 +2142,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		else
 			svm_disable_lbrv(svm);
 		break;
-	case MSR_K7_EVNTSEL0:
-	case MSR_K7_EVNTSEL1:
-	case MSR_K7_EVNTSEL2:
-	case MSR_K7_EVNTSEL3:
-	case MSR_K7_PERFCTR0:
-	case MSR_K7_PERFCTR1:
-	case MSR_K7_PERFCTR2:
-	case MSR_K7_PERFCTR3:
-		/*
-		 * Just discard all writes to the performance counters; this
-		 * should keep both older linux and windows 64-bit guests
-		 * happy
-		 */
-		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
-
-		break;
 	case MSR_VM_HSAVE_PA:
 		svm->hsave_msr = data;
 		break;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c08bb4cf372..6ee929255a3 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1024,18 +1024,6 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_TSC:
 		rdtscll(host_tsc);
 		guest_write_tsc(data, host_tsc);
-		break;
-	case MSR_P6_PERFCTR0:
-	case MSR_P6_PERFCTR1:
-	case MSR_P6_EVNTSEL0:
-	case MSR_P6_EVNTSEL1:
-		/*
-		 * Just discard all writes to the performance counters; this
-		 * should keep both older linux and windows 64-bit guests
-		 * happy
-		 */
-		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", msr_index, data);
-
 		break;
 	case MSR_IA32_CR_PAT:
 		if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 89862a80e32..30492f0ba4e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -886,6 +886,36 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_IA32_MCG_STATUS:
 	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
 		return set_msr_mce(vcpu, msr, data);
+
+	/* Performance counters are not protected by a CPUID bit,
+	 * so we should check all of them in the generic path for the sake of
+	 * cross vendor migration.
+	 * Writing a zero into the event select MSRs disables them,
+	 * which we perfectly emulate ;-). Any other value should be at least
+	 * reported, some guests depend on them.
+	 */
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
+	case MSR_K7_EVNTSEL0:
+	case MSR_K7_EVNTSEL1:
+	case MSR_K7_EVNTSEL2:
+	case MSR_K7_EVNTSEL3:
+		if (data != 0)
+			pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
+				"0x%x data 0x%llx\n", msr, data);
+		break;
+	/* at least RHEL 4 unconditionally writes to the perfctr registers,
+	 * so we ignore writes to make it happy.
+	 */
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
+	case MSR_K7_PERFCTR0:
+	case MSR_K7_PERFCTR1:
+	case MSR_K7_PERFCTR2:
+	case MSR_K7_PERFCTR3:
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
+			"0x%x data 0x%llx\n", msr, data);
+		break;
 	default:
 		pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data);
 		return 1;
-- 
cgit v1.2.3


From e799794e02a368f79c3fae26aabaaadd0b7466ce Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:40 -0300
Subject: KVM: VMX: more MSR_IA32_VMX_EPT_VPID_CAP capability bits

Required for EPT misconfiguration handler.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/vmx.h |  7 +++++++
 arch/x86/kvm/vmx.c         | 20 ++++++++++++++++++++
 2 files changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index e7927a639d6..272514c2d45 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -352,9 +352,16 @@ enum vmcs_field {
 #define VMX_EPT_EXTENT_INDIVIDUAL_ADDR		0
 #define VMX_EPT_EXTENT_CONTEXT			1
 #define VMX_EPT_EXTENT_GLOBAL			2
+
+#define VMX_EPT_EXECUTE_ONLY_BIT		(1ull)
+#define VMX_EPT_PAGE_WALK_4_BIT			(1ull << 6)
+#define VMX_EPTP_UC_BIT				(1ull << 8)
+#define VMX_EPTP_WB_BIT				(1ull << 14)
+#define VMX_EPT_2MB_PAGE_BIT			(1ull << 16)
 #define VMX_EPT_EXTENT_INDIVIDUAL_BIT		(1ull << 24)
 #define VMX_EPT_EXTENT_CONTEXT_BIT		(1ull << 25)
 #define VMX_EPT_EXTENT_GLOBAL_BIT		(1ull << 26)
+
 #define VMX_EPT_DEFAULT_GAW			3
 #define VMX_EPT_MAX_GAW				0x4
 #define VMX_EPT_MT_EPTE_SHIFT			3
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6ee929255a3..6610181267b 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -270,6 +270,26 @@ static inline bool cpu_has_vmx_flexpriority(void)
 		cpu_has_vmx_virtualize_apic_accesses();
 }
 
+static inline bool cpu_has_vmx_ept_execute_only(void)
+{
+	return !!(vmx_capability.ept & VMX_EPT_EXECUTE_ONLY_BIT);
+}
+
+static inline bool cpu_has_vmx_eptp_uncacheable(void)
+{
+	return !!(vmx_capability.ept & VMX_EPTP_UC_BIT);
+}
+
+static inline bool cpu_has_vmx_eptp_writeback(void)
+{
+	return !!(vmx_capability.ept & VMX_EPTP_WB_BIT);
+}
+
+static inline bool cpu_has_vmx_ept_2m_page(void)
+{
+	return !!(vmx_capability.ept & VMX_EPT_2MB_PAGE_BIT);
+}
+
 static inline int cpu_has_vmx_invept_individual_addr(void)
 {
 	return !!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT);
-- 
cgit v1.2.3


From 4d88954d6246d7d43bb8903981731002179f1a1c Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:41 -0300
Subject: KVM: MMU: make for_each_shadow_entry aware of largepages

This way there is no need to add explicit checks in every
for_each_shadow_entry user.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 780ce3fe791..e18f65bf2de 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1302,6 +1302,11 @@ static bool shadow_walk_okay(struct kvm_shadow_walk_iterator *iterator)
 {
 	if (iterator->level < PT_PAGE_TABLE_LEVEL)
 		return false;
+
+	if (iterator->level == PT_PAGE_TABLE_LEVEL)
+		if (is_large_pte(*iterator->sptep))
+			return false;
+
 	iterator->index = SHADOW_PT_INDEX(iterator->addr, iterator->level);
 	iterator->sptep	= ((u64 *)__va(iterator->shadow_addr)) + iterator->index;
 	return true;
-- 
cgit v1.2.3


From 94d8b056a20bac4f9905d6dafcf7b7005207684a Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:42 -0300
Subject: KVM: MMU: add kvm_mmu_get_spte_hierarchy helper

Required by EPT misconfiguration handler.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 18 ++++++++++++++++++
 arch/x86/kvm/mmu.h |  2 ++
 2 files changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index e18f65bf2de..12974de88aa 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3038,6 +3038,24 @@ out:
 	return r;
 }
 
+int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4])
+{
+	struct kvm_shadow_walk_iterator iterator;
+	int nr_sptes = 0;
+
+	spin_lock(&vcpu->kvm->mmu_lock);
+	for_each_shadow_entry(vcpu, addr, iterator) {
+		sptes[iterator.level-1] = *iterator.sptep;
+		nr_sptes++;
+		if (!is_shadow_present_pte(*iterator.sptep))
+			break;
+	}
+	spin_unlock(&vcpu->kvm->mmu_lock);
+
+	return nr_sptes;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_get_spte_hierarchy);
+
 #ifdef AUDIT
 
 static const char *audit_msg;
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 016bf7183e9..61a1b3884b4 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -37,6 +37,8 @@
 #define PT32_ROOT_LEVEL 2
 #define PT32E_ROOT_LEVEL 3
 
+int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4]);
+
 static inline void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
 	if (unlikely(vcpu->kvm->arch.n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES))
-- 
cgit v1.2.3


From 68f89400bc92421d6da22e1ec8e3ec599c3c8244 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:43 -0300
Subject: KVM: VMX: EPT misconfiguration handler

Handler for EPT misconfiguration which checks for valid state
in the shadow pagetables, printing the spte on each level.

The separate WARN_ONs are useful for kerneloops.org.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 85 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6610181267b..94c07ada103 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3227,6 +3227,89 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
 }
 
+static u64 ept_rsvd_mask(u64 spte, int level)
+{
+	int i;
+	u64 mask = 0;
+
+	for (i = 51; i > boot_cpu_data.x86_phys_bits; i--)
+		mask |= (1ULL << i);
+
+	if (level > 2)
+		/* bits 7:3 reserved */
+		mask |= 0xf8;
+	else if (level == 2) {
+		if (spte & (1ULL << 7))
+			/* 2MB ref, bits 20:12 reserved */
+			mask |= 0x1ff000;
+		else
+			/* bits 6:3 reserved */
+			mask |= 0x78;
+	}
+
+	return mask;
+}
+
+static void ept_misconfig_inspect_spte(struct kvm_vcpu *vcpu, u64 spte,
+				       int level)
+{
+	printk(KERN_ERR "%s: spte 0x%llx level %d\n", __func__, spte, level);
+
+	/* 010b (write-only) */
+	WARN_ON((spte & 0x7) == 0x2);
+
+	/* 110b (write/execute) */
+	WARN_ON((spte & 0x7) == 0x6);
+
+	/* 100b (execute-only) and value not supported by logical processor */
+	if (!cpu_has_vmx_ept_execute_only())
+		WARN_ON((spte & 0x7) == 0x4);
+
+	/* not 000b */
+	if ((spte & 0x7)) {
+		u64 rsvd_bits = spte & ept_rsvd_mask(spte, level);
+
+		if (rsvd_bits != 0) {
+			printk(KERN_ERR "%s: rsvd_bits = 0x%llx\n",
+					 __func__, rsvd_bits);
+			WARN_ON(1);
+		}
+
+		if (level == 1 || (level == 2 && (spte & (1ULL << 7)))) {
+			u64 ept_mem_type = (spte & 0x38) >> 3;
+
+			if (ept_mem_type == 2 || ept_mem_type == 3 ||
+			    ept_mem_type == 7) {
+				printk(KERN_ERR "%s: ept_mem_type=0x%llx\n",
+						__func__, ept_mem_type);
+				WARN_ON(1);
+			}
+		}
+	}
+}
+
+static int handle_ept_misconfig(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	u64 sptes[4];
+	int nr_sptes, i;
+	gpa_t gpa;
+
+	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+
+	printk(KERN_ERR "EPT: Misconfiguration.\n");
+	printk(KERN_ERR "EPT: GPA: 0x%llx\n", gpa);
+
+	nr_sptes = kvm_mmu_get_spte_hierarchy(vcpu, gpa, sptes);
+
+	for (i = PT64_ROOT_LEVEL; i > PT64_ROOT_LEVEL - nr_sptes; --i)
+		ept_misconfig_inspect_spte(vcpu, sptes[i-1], i);
+
+	kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+	kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
+
+	return 0;
+}
+
 static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	u32 cpu_based_vm_exec_control;
@@ -3306,8 +3389,9 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
 	[EXIT_REASON_TASK_SWITCH]             = handle_task_switch,
-	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
 	[EXIT_REASON_MCE_DURING_VMENTRY]      = handle_machine_check,
+	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
+	[EXIT_REASON_EPT_MISCONFIG]           = handle_ept_misconfig,
 };
 
 static const int kvm_vmx_max_exit_handlers =
-- 
cgit v1.2.3


From 54dee9933e8d93589ad63ec3d6be39f1921b0767 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:44 -0300
Subject: KVM: VMX: conditionally disable 2M pages

Disable usage of 2M pages if VMX_EPT_2MB_PAGE_BIT (bit 16) is clear
in MSR_IA32_VMX_EPT_VPID_CAP and EPT is enabled.

[avi: s/largepages_disabled/largepages_enabled/ to avoid negative logic]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 94c07ada103..fc8d49c6bc5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1381,6 +1381,9 @@ static __init int hardware_setup(void)
 	if (!cpu_has_vmx_tpr_shadow())
 		kvm_x86_ops->update_cr8_intercept = NULL;
 
+	if (enable_ept && !cpu_has_vmx_ept_2m_page())
+		kvm_disable_largepages();
+
 	return alloc_kvm_area();
 }
 
-- 
cgit v1.2.3


From 6edf14d8d0df144d6928799040f46fa37b5460ae Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 11 Jun 2009 11:26:11 +0300
Subject: KVM: Replace pending exception by PF if it happens serially

Replace previous exception with a new one in a hope that instruction
re-execution will regenerate lost exception.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 30492f0ba4e..a066876f137 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -181,16 +181,22 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
 	++vcpu->stat.pf_guest;
 
 	if (vcpu->arch.exception.pending) {
-		if (vcpu->arch.exception.nr == PF_VECTOR) {
-			printk(KERN_DEBUG "kvm: inject_page_fault:"
-					" double fault 0x%lx\n", addr);
-			vcpu->arch.exception.nr = DF_VECTOR;
-			vcpu->arch.exception.error_code = 0;
-		} else if (vcpu->arch.exception.nr == DF_VECTOR) {
+		switch(vcpu->arch.exception.nr) {
+		case DF_VECTOR:
 			/* triple fault -> shutdown */
 			set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+			return;
+		case PF_VECTOR:
+			vcpu->arch.exception.nr = DF_VECTOR;
+			vcpu->arch.exception.error_code = 0;
+			return;
+		default:
+			/* replace previous exception with a new one in a hope
+			   that instruction re-execution will regenerate lost
+			   exception */
+			vcpu->arch.exception.pending = false;
+			break;
 		}
-		return;
 	}
 	vcpu->arch.cr2 = addr;
 	kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
-- 
cgit v1.2.3


From 33e4c68656a2e461b296ce714ec322978de85412 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 11 Jun 2009 11:06:51 +0300
Subject: KVM: Optimize searching for highest IRR

Most of the time IRR is empty, so instead of scanning the whole IRR on
each VM entry keep a variable that tells us if IRR is not empty. IRR
will have to be scanned twice on each IRQ delivery, but this is much
more rare than VM entry.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 24 +++++++++++++++++++++---
 arch/x86/kvm/lapic.h |  1 +
 2 files changed, 22 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index b1694dc4572..3bde43c3789 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -165,29 +165,46 @@ static int find_highest_vector(void *bitmap)
 
 static inline int apic_test_and_set_irr(int vec, struct kvm_lapic *apic)
 {
+	apic->irr_pending = true;
 	return apic_test_and_set_vector(vec, apic->regs + APIC_IRR);
 }
 
-static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
+static inline int apic_search_irr(struct kvm_lapic *apic)
 {
-	apic_clear_vector(vec, apic->regs + APIC_IRR);
+	return find_highest_vector(apic->regs + APIC_IRR);
 }
 
 static inline int apic_find_highest_irr(struct kvm_lapic *apic)
 {
 	int result;
 
-	result = find_highest_vector(apic->regs + APIC_IRR);
+	if (!apic->irr_pending)
+		return -1;
+
+	result = apic_search_irr(apic);
 	ASSERT(result == -1 || result >= 16);
 
 	return result;
 }
 
+static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
+{
+	apic->irr_pending = false;
+	apic_clear_vector(vec, apic->regs + APIC_IRR);
+	if (apic_search_irr(apic) != -1)
+		apic->irr_pending = true;
+}
+
 int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	int highest_irr;
 
+	/* This may race with setting of irr in __apic_accept_irq() and
+	 * value returned may be wrong, but kvm_vcpu_kick() in __apic_accept_irq
+	 * will cause vmexit immediately and the value will be recalculated
+	 * on the next vmentry.
+	 */
 	if (!apic)
 		return 0;
 	highest_irr = apic_find_highest_irr(apic);
@@ -843,6 +860,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 		apic_set_reg(apic, APIC_ISR + 0x10 * i, 0);
 		apic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
 	}
+	apic->irr_pending = false;
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
 	if (kvm_vcpu_is_bsp(vcpu))
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index a587f8349c4..3f3ecc6edbf 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -12,6 +12,7 @@ struct kvm_lapic {
 	struct kvm_timer lapic_timer;
 	u32 divide_count;
 	struct kvm_vcpu *vcpu;
+	bool irr_pending;
 	struct page *regs_page;
 	void *regs;
 	gpa_t vapic_addr;
-- 
cgit v1.2.3


From f7104db26ab2bc5f642892774ac8fb0f15400969 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Tue, 9 Jun 2009 15:37:01 +0200
Subject: KVM: Fix racy event propagation in timer

Minor issue that likely had no practical relevance: the kvm timer
function so far incremented the pending counter and then may reset it
again to 1 in case reinjection was disabled. This opened a small racy
window with the corresponding VCPU loop that may have happened to run
on another (real) CPU and already consumed the value.

Fix it by skipping the incrementation in case pending is already > 0.
This opens a different race windows, but may only rarely cause lost
events in case we do not care about them anyway (!reinject).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/timer.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 85cc743a820..1baed414b57 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -9,12 +9,16 @@ static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer)
 	int restart_timer = 0;
 	wait_queue_head_t *q = &vcpu->wq;
 
-	/* FIXME: this code should not know anything about vcpus */
-	if (!atomic_inc_and_test(&ktimer->pending))
-		set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
-
-	if (!ktimer->reinject)
-		atomic_set(&ktimer->pending, 1);
+	/*
+	 * There is a race window between reading and incrementing, but we do
+	 * not care about potentially loosing timer events in the !reinject
+	 * case anyway.
+	 */
+	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
+		/* FIXME: this code should not know anything about vcpus */
+		if (!atomic_inc_and_test(&ktimer->pending))
+			set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
+	}
 
 	if (waitqueue_active(q))
 		wake_up_interruptible(q);
-- 
cgit v1.2.3


From 681405bfc73a2717ae9b03b2bad465b009106f31 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Tue, 9 Jun 2009 15:37:03 +0200
Subject: KVM: Drop useless atomic test from timer function

The current code tries to optimize the setting of
KVM_REQ_PENDING_TIMER but used atomic_inc_and_test - which always
returns true unless pending had the invalid value of -1 on entry. This
patch drops the test part preserving the original semantic but
expressing it less confusingly.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/timer.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 1baed414b57..eea40439066 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -15,9 +15,9 @@ static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer)
 	 * case anyway.
 	 */
 	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
+		atomic_inc(&ktimer->pending);
 		/* FIXME: this code should not know anything about vcpus */
-		if (!atomic_inc_and_test(&ktimer->pending))
-			set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
+		set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
 	}
 
 	if (waitqueue_active(q))
-- 
cgit v1.2.3


From d3edefc0035669e8817d1d5c32ef03e882477323 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 16 Jun 2009 12:33:56 +0300
Subject: KVM: VMX: Only reload guest cr2 if different from host cr2

cr2 changes only rarely, and writing it is expensive.  Avoid the costly cr2
writes by checking if it does not already hold the desired value.

Shaves 70 cycles off the vmexit latency.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index fc8d49c6bc5..1a84ca191cd 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3651,11 +3651,16 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"mov %%"R"sp, %c[host_rsp](%0) \n\t"
 		__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
 		"1: \n\t"
+		/* Reload cr2 if changed */
+		"mov %c[cr2](%0), %%"R"ax \n\t"
+		"mov %%cr2, %%"R"dx \n\t"
+		"cmp %%"R"ax, %%"R"dx \n\t"
+		"je 2f \n\t"
+		"mov %%"R"ax, %%cr2 \n\t"
+		"2: \n\t"
 		/* Check if vmlaunch of vmresume is needed */
 		"cmpl $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
-		"mov %c[cr2](%0), %%"R"ax \n\t"
-		"mov %%"R"ax, %%cr2 \n\t"
 		"mov %c[rax](%0), %%"R"ax \n\t"
 		"mov %c[rbx](%0), %%"R"bx \n\t"
 		"mov %c[rdx](%0), %%"R"dx \n\t"
-- 
cgit v1.2.3


From b3dbf89e676e47ef3b10802f9aba5a8e04aba132 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 16 Jun 2009 12:36:33 +0300
Subject: KVM: SVM: Don't save/restore host cr2

The host never reads cr2 in process context, so are free to clobber it.  The
vmx code does this, so we can safely remove the save/restore code.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 17 -----------------
 1 file changed, 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 060aa9f5571..132be0c7c3e 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -81,7 +81,6 @@ struct vcpu_svm {
 
 	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
 	u64 host_gs_base;
-	unsigned long host_cr2;
 
 	u32 *msrpm;
 	struct vmcb *hsave;
@@ -186,19 +185,6 @@ static inline void invlpga(unsigned long addr, u32 asid)
 	asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
 }
 
-static inline unsigned long kvm_read_cr2(void)
-{
-	unsigned long cr2;
-
-	asm volatile ("mov %%cr2, %0" : "=r" (cr2));
-	return cr2;
-}
-
-static inline void kvm_write_cr2(unsigned long val)
-{
-	asm volatile ("mov %0, %%cr2" :: "r" (val));
-}
-
 static inline void force_new_asid(struct kvm_vcpu *vcpu)
 {
 	to_svm(vcpu)->asid_generation--;
@@ -2527,7 +2513,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	fs_selector = kvm_read_fs();
 	gs_selector = kvm_read_gs();
 	ldt_selector = kvm_read_ldt();
-	svm->host_cr2 = kvm_read_cr2();
 	if (!is_nested(svm))
 		svm->vmcb->save.cr2 = vcpu->arch.cr2;
 	/* required for live migration with NPT */
@@ -2614,8 +2599,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
 	vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
 
-	kvm_write_cr2(svm->host_cr2);
-
 	kvm_load_fs(fs_selector);
 	kvm_load_gs(gs_selector);
 	kvm_load_ldt(ldt_selector);
-- 
cgit v1.2.3


From 0367b4330e463c45981437083991b90d25a9d78d Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:22 +0200
Subject: x86: Add definition for IGNNE MSR

Hyper-V accesses MSR_IGNNE while running under KVM.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/msr-index.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 6be7fc254b5..bd5549034a9 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -374,6 +374,7 @@
 /* AMD-V MSRs */
 
 #define MSR_VM_CR                       0xc0010114
+#define MSR_VM_IGNNE                    0xc0010115
 #define MSR_VM_HSAVE_PA                 0xc0010117
 
 #endif /* _ASM_X86_MSR_INDEX_H */
-- 
cgit v1.2.3


From 3c5d0a44b011e0a1d857452f05c698e1008b4b4a Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:23 +0200
Subject: KVM: Implement MSRs used by Hyper-V

Hyper-V uses some MSRs, some of which are actually reserved for BIOS usage.

But let's be nice today and have it its way, because otherwise it fails
terribly.

[jaswinder: fix build for linux-next changes]

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 132be0c7c3e..146c17d406e 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2131,6 +2131,11 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	case MSR_VM_HSAVE_PA:
 		svm->hsave_msr = data;
 		break;
+	case MSR_VM_CR:
+	case MSR_VM_IGNNE:
+	case MSR_K7_HWCR:
+		pr_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
+		break;
 	default:
 		return kvm_set_msr_common(vcpu, ecx, data);
 	}
-- 
cgit v1.2.3


From ff092385e8285c03d8b148f42f46f98c5f4becd5 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:24 +0200
Subject: KVM: SVM: Implement INVLPGA

SVM adds another way to do INVLPG by ASID which Hyper-V makes use of,
so let's implement it!

For now we just do the same thing invlpg does, as asid switching
means we flush the mmu anyways. That might change one day though.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 146c17d406e..be699795d70 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1880,6 +1880,19 @@ static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int invlpga_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	struct kvm_vcpu *vcpu = &svm->vcpu;
+	nsvm_printk("INVLPGA\n");
+
+	/* Let's treat INVLPGA the same as INVLPG (can be optimized!) */
+	kvm_mmu_invlpg(vcpu, vcpu->arch.regs[VCPU_REGS_RAX]);
+
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+	skip_emulated_instruction(&svm->vcpu);
+	return 1;
+}
+
 static int invalid_op_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
@@ -2227,7 +2240,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_INVD]                         = emulate_on_interception,
 	[SVM_EXIT_HLT]				= halt_interception,
 	[SVM_EXIT_INVLPG]			= invlpg_interception,
-	[SVM_EXIT_INVLPGA]			= invalid_op_interception,
+	[SVM_EXIT_INVLPGA]			= invlpga_interception,
 	[SVM_EXIT_IOIO] 		  	= io_interception,
 	[SVM_EXIT_MSR]				= msr_interception,
 	[SVM_EXIT_TASK_SWITCH]			= task_switch_interception,
-- 
cgit v1.2.3


From 219b65dcf6c0bad83d51bfa12e25891c02de2414 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:25 +0200
Subject: KVM: SVM: Improve nested interrupt injection

While trying to get Hyper-V running, I realized that the interrupt injection
mechanisms that are in place right now are not 100% correct.

This patch makes nested SVM's interrupt injection behave more like on a
real machine.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 39 ++++++++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index be699795d70..45666618377 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1612,7 +1612,8 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	/* Kill any pending exceptions */
 	if (svm->vcpu.arch.exception.pending == true)
 		nsvm_printk("WARNING: Pending Exception\n");
-	svm->vcpu.arch.exception.pending = false;
+	kvm_clear_exception_queue(&svm->vcpu);
+	kvm_clear_interrupt_queue(&svm->vcpu);
 
 	/* Restore selected save entries */
 	svm->vmcb->save.es = hsave->save.es;
@@ -1680,7 +1681,8 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	svm->nested_vmcb = svm->vmcb->save.rax;
 
 	/* Clear internal status */
-	svm->vcpu.arch.exception.pending = false;
+	kvm_clear_exception_queue(&svm->vcpu);
+	kvm_clear_interrupt_queue(&svm->vcpu);
 
 	/* Save the old vmcb, so we don't need to pick what we save, but
 	   can restore everything when a VMEXIT occurs */
@@ -2362,21 +2364,14 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 		((/*control->int_vector >> 4*/ 0xf) << V_INTR_PRIO_SHIFT);
 }
 
-static void svm_queue_irq(struct kvm_vcpu *vcpu, unsigned nr)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	svm->vmcb->control.event_inj = nr |
-		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
-}
-
 static void svm_set_irq(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	nested_svm_intr(svm);
+	BUG_ON(!(svm->vcpu.arch.hflags & HF_GIF_MASK));
 
-	svm_queue_irq(vcpu, vcpu->arch.interrupt.nr);
+	svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
+		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
 }
 
 static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
@@ -2404,13 +2399,25 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 	struct vmcb *vmcb = svm->vmcb;
 	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
 		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		(svm->vcpu.arch.hflags & HF_GIF_MASK);
+		(svm->vcpu.arch.hflags & HF_GIF_MASK) &&
+		!is_nested(svm);
 }
 
 static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
-	svm_set_vintr(to_svm(vcpu));
-	svm_inject_irq(to_svm(vcpu), 0x0);
+	struct vcpu_svm *svm = to_svm(vcpu);
+	nsvm_printk("Trying to open IRQ window\n");
+
+	nested_svm_intr(svm);
+
+	/* In case GIF=0 we can't rely on the CPU to tell us when
+	 * GIF becomes 1, because that's a separate STGI/VMRUN intercept.
+	 * The next time we get that intercept, this function will be
+	 * called again though and we'll get the vintr intercept. */
+	if (svm->vcpu.arch.hflags & HF_GIF_MASK) {
+		svm_set_vintr(svm);
+		svm_inject_irq(svm, 0x0);
+	}
 }
 
 static void enable_nmi_window(struct kvm_vcpu *vcpu)
@@ -2489,6 +2496,8 @@ static void svm_complete_interrupts(struct vcpu_svm *svm)
 	case SVM_EXITINTINFO_TYPE_EXEPT:
 		/* In case of software exception do not reinject an exception
 		   vector, but re-execute and instruction instead */
+		if (is_nested(svm))
+			break;
 		if (kvm_exception_is_soft(vector))
 			break;
 		if (exitintinfo & SVM_EXITINTINFO_VALID_ERR) {
-- 
cgit v1.2.3


From 229456fc34b1c9031b04f7581e7b755d1cebfe9c Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 17 Jun 2009 09:22:14 -0300
Subject: KVM: convert custom marker based tracing to event traces

This allows use of the powerful ftrace infrastructure.

See Documentation/trace/ for usage information.

[avi, stephen: various build fixes]
[sheng: fix control register breakage]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |   2 +
 arch/x86/kvm/Makefile           |   4 +
 arch/x86/kvm/lapic.c            |   7 +-
 arch/x86/kvm/svm.c              |  84 +++++++++----
 arch/x86/kvm/trace.h            | 260 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/kvm/vmx.c              |  78 +++++++-----
 arch/x86/kvm/x86.c              |  48 +++-----
 7 files changed, 397 insertions(+), 86 deletions(-)
 create mode 100644 arch/x86/kvm/trace.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c7b0cc2b702..19027ab2041 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/mmu_notifier.h>
+#include <linux/tracepoint.h>
 
 #include <linux/kvm.h>
 #include <linux/kvm_para.h>
@@ -527,6 +528,7 @@ struct kvm_x86_ops {
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
 	int (*get_tdp_level)(void);
 	u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
+	const struct trace_print_flags *exit_reasons_str;
 };
 
 extern struct kvm_x86_ops *kvm_x86_ops;
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 01e3c61f749..7c56850b82c 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -1,6 +1,10 @@
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
+CFLAGS_x86.o := -I.
+CFLAGS_svm.o := -I.
+CFLAGS_vmx.o := -I.
+
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
 				coalesced_mmio.o irq_comm.o eventfd.o)
 kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 3bde43c3789..2e028659638 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -34,6 +34,7 @@
 #include <asm/atomic.h>
 #include "kvm_cache_regs.h"
 #include "irq.h"
+#include "trace.h"
 
 #ifndef CONFIG_X86_64
 #define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -515,8 +516,6 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 {
 	u32 val = 0;
 
-	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
-
 	if (offset >= LAPIC_MMIO_LENGTH)
 		return 0;
 
@@ -562,6 +561,8 @@ static void apic_mmio_read(struct kvm_io_device *this,
 	}
 	result = __apic_read(apic, offset & ~0xf);
 
+	trace_kvm_apic_read(offset, result);
+
 	switch (len) {
 	case 1:
 	case 2:
@@ -657,7 +658,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 	offset &= 0xff0;
 
-	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+	trace_kvm_apic_write(offset, val);
 
 	switch (offset) {
 	case APIC_ID:		/* Local APIC ID */
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 45666618377..b1c44620886 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -25,10 +25,12 @@
 #include <linux/vmalloc.h>
 #include <linux/highmem.h>
 #include <linux/sched.h>
+#include <linux/ftrace_event.h>
 
 #include <asm/desc.h>
 
 #include <asm/virtext.h>
+#include "trace.h"
 
 #define __ex(x) __kvm_handle_fault_on_reboot(x)
 
@@ -1096,7 +1098,6 @@ static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
 		val = 0;
 	}
 
-	KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
 	return val;
 }
 
@@ -1105,8 +1106,6 @@ static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)value, handler);
-
 	*exception = 0;
 
 	switch (dr) {
@@ -1154,14 +1153,7 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
 
-	if (!npt_enabled)
-		KVMTRACE_3D(PAGE_FAULT, &svm->vcpu, error_code,
-			    (u32)fault_address, (u32)(fault_address >> 32),
-			    handler);
-	else
-		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
-			    (u32)fault_address, (u32)(fault_address >> 32),
-			    handler);
+	trace_kvm_page_fault(fault_address, error_code);
 	/*
 	 * FIXME: Tis shouldn't be necessary here, but there is a flush
 	 * missing in the MMU code. Until we find this bug, flush the
@@ -1288,14 +1280,12 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 
 static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
-	KVMTRACE_0D(NMI, &svm->vcpu, handler);
 	return 1;
 }
 
 static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	++svm->vcpu.stat.irq_exits;
-	KVMTRACE_0D(INTR, &svm->vcpu, handler);
 	return 1;
 }
 
@@ -2077,8 +2067,7 @@ static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	if (svm_get_msr(&svm->vcpu, ecx, &data))
 		kvm_inject_gp(&svm->vcpu, 0);
 	else {
-		KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
-			    (u32)(data >> 32), handler);
+		trace_kvm_msr_read(ecx, data);
 
 		svm->vcpu.arch.regs[VCPU_REGS_RAX] = data & 0xffffffff;
 		svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
@@ -2163,8 +2152,7 @@ static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	u64 data = (svm->vcpu.arch.regs[VCPU_REGS_RAX] & -1u)
 		| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
 
-	KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
-		    handler);
+	trace_kvm_msr_write(ecx, data);
 
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
 	if (svm_set_msr(&svm->vcpu, ecx, data))
@@ -2185,8 +2173,6 @@ static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int interrupt_window_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
-	KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
-
 	svm_clear_vintr(svm);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
@@ -2265,8 +2251,7 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 exit_code = svm->vmcb->control.exit_code;
 
-	KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
-		    (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
+	trace_kvm_exit(exit_code, svm->vmcb->save.rip);
 
 	if (is_nested(svm)) {
 		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
@@ -2354,7 +2339,7 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
 	struct vmcb_control_area *control;
 
-	KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
+	trace_kvm_inj_virq(irq);
 
 	++svm->vcpu.stat.irq_injections;
 	control = &svm->vmcb->control;
@@ -2717,6 +2702,59 @@ static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	return 0;
 }
 
+static const struct trace_print_flags svm_exit_reasons_str[] = {
+	{ SVM_EXIT_READ_CR0,           		"read_cr0" },
+	{ SVM_EXIT_READ_CR3,	      		"read_cr3" },
+	{ SVM_EXIT_READ_CR4,	      		"read_cr4" },
+	{ SVM_EXIT_READ_CR8,  	      		"read_cr8" },
+	{ SVM_EXIT_WRITE_CR0,          		"write_cr0" },
+	{ SVM_EXIT_WRITE_CR3,	      		"write_cr3" },
+	{ SVM_EXIT_WRITE_CR4,          		"write_cr4" },
+	{ SVM_EXIT_WRITE_CR8, 	      		"write_cr8" },
+	{ SVM_EXIT_READ_DR0, 	      		"read_dr0" },
+	{ SVM_EXIT_READ_DR1,	      		"read_dr1" },
+	{ SVM_EXIT_READ_DR2,	      		"read_dr2" },
+	{ SVM_EXIT_READ_DR3,	      		"read_dr3" },
+	{ SVM_EXIT_WRITE_DR0,	      		"write_dr0" },
+	{ SVM_EXIT_WRITE_DR1,	      		"write_dr1" },
+	{ SVM_EXIT_WRITE_DR2,	      		"write_dr2" },
+	{ SVM_EXIT_WRITE_DR3,	      		"write_dr3" },
+	{ SVM_EXIT_WRITE_DR5,	      		"write_dr5" },
+	{ SVM_EXIT_WRITE_DR7,	      		"write_dr7" },
+	{ SVM_EXIT_EXCP_BASE + DB_VECTOR,	"DB excp" },
+	{ SVM_EXIT_EXCP_BASE + BP_VECTOR,	"BP excp" },
+	{ SVM_EXIT_EXCP_BASE + UD_VECTOR,	"UD excp" },
+	{ SVM_EXIT_EXCP_BASE + PF_VECTOR,	"PF excp" },
+	{ SVM_EXIT_EXCP_BASE + NM_VECTOR,	"NM excp" },
+	{ SVM_EXIT_EXCP_BASE + MC_VECTOR,	"MC excp" },
+	{ SVM_EXIT_INTR,			"interrupt" },
+	{ SVM_EXIT_NMI,				"nmi" },
+	{ SVM_EXIT_SMI,				"smi" },
+	{ SVM_EXIT_INIT,			"init" },
+	{ SVM_EXIT_VINTR,			"vintr" },
+	{ SVM_EXIT_CPUID,			"cpuid" },
+	{ SVM_EXIT_INVD,			"invd" },
+	{ SVM_EXIT_HLT,				"hlt" },
+	{ SVM_EXIT_INVLPG,			"invlpg" },
+	{ SVM_EXIT_INVLPGA,			"invlpga" },
+	{ SVM_EXIT_IOIO,			"io" },
+	{ SVM_EXIT_MSR,				"msr" },
+	{ SVM_EXIT_TASK_SWITCH,			"task_switch" },
+	{ SVM_EXIT_SHUTDOWN,			"shutdown" },
+	{ SVM_EXIT_VMRUN,			"vmrun" },
+	{ SVM_EXIT_VMMCALL,			"hypercall" },
+	{ SVM_EXIT_VMLOAD,			"vmload" },
+	{ SVM_EXIT_VMSAVE,			"vmsave" },
+	{ SVM_EXIT_STGI,			"stgi" },
+	{ SVM_EXIT_CLGI,			"clgi" },
+	{ SVM_EXIT_SKINIT,			"skinit" },
+	{ SVM_EXIT_WBINVD,			"wbinvd" },
+	{ SVM_EXIT_MONITOR,			"monitor" },
+	{ SVM_EXIT_MWAIT,			"mwait" },
+	{ SVM_EXIT_NPF,				"npf" },
+	{ -1, NULL }
+};
+
 static struct kvm_x86_ops svm_x86_ops = {
 	.cpu_has_kvm_support = has_svm,
 	.disabled_by_bios = is_disabled,
@@ -2778,6 +2816,8 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.set_tss_addr = svm_set_tss_addr,
 	.get_tdp_level = get_npt_level,
 	.get_mt_mask = svm_get_mt_mask,
+
+	.exit_reasons_str = svm_exit_reasons_str,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
new file mode 100644
index 00000000000..cd8c90db41a
--- /dev/null
+++ b/arch/x86/kvm/trace.h
@@ -0,0 +1,260 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_PATH arch/x86/kvm
+#define TRACE_INCLUDE_FILE trace
+
+/*
+ * Tracepoint for guest mode entry.
+ */
+TRACE_EVENT(kvm_entry,
+	TP_PROTO(unsigned int vcpu_id),
+	TP_ARGS(vcpu_id),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	vcpu_id		)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id	= vcpu_id;
+	),
+
+	TP_printk("vcpu %u", __entry->vcpu_id)
+);
+
+/*
+ * Tracepoint for hypercall.
+ */
+TRACE_EVENT(kvm_hypercall,
+	TP_PROTO(unsigned long nr, unsigned long a0, unsigned long a1,
+		 unsigned long a2, unsigned long a3),
+	TP_ARGS(nr, a0, a1, a2, a3),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long, 	nr		)
+		__field(	unsigned long,	a0		)
+		__field(	unsigned long,	a1		)
+		__field(	unsigned long,	a2		)
+		__field(	unsigned long,	a3		)
+	),
+
+	TP_fast_assign(
+		__entry->nr		= nr;
+		__entry->a0		= a0;
+		__entry->a1		= a1;
+		__entry->a2		= a2;
+		__entry->a3		= a3;
+	),
+
+	TP_printk("nr 0x%lx a0 0x%lx a1 0x%lx a2 0x%lx a3 0x%lx",
+		 __entry->nr, __entry->a0, __entry->a1,  __entry->a2,
+		 __entry->a3)
+);
+
+/*
+ * Tracepoint for PIO.
+ */
+TRACE_EVENT(kvm_pio,
+	TP_PROTO(unsigned int rw, unsigned int port, unsigned int size,
+		 unsigned int count),
+	TP_ARGS(rw, port, size, count),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int, 	rw		)
+		__field(	unsigned int, 	port		)
+		__field(	unsigned int, 	size		)
+		__field(	unsigned int,	count		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->port		= port;
+		__entry->size		= size;
+		__entry->count		= count;
+	),
+
+	TP_printk("pio_%s at 0x%x size %d count %d",
+		  __entry->rw ? "write" : "read",
+		  __entry->port, __entry->size, __entry->count)
+);
+
+/*
+ * Tracepoint for cpuid.
+ */
+TRACE_EVENT(kvm_cpuid,
+	TP_PROTO(unsigned int function, unsigned long rax, unsigned long rbx,
+		 unsigned long rcx, unsigned long rdx),
+	TP_ARGS(function, rax, rbx, rcx, rdx),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	function	)
+		__field(	unsigned long,	rax		)
+		__field(	unsigned long,	rbx		)
+		__field(	unsigned long,	rcx		)
+		__field(	unsigned long,	rdx		)
+	),
+
+	TP_fast_assign(
+		__entry->function	= function;
+		__entry->rax		= rax;
+		__entry->rbx		= rbx;
+		__entry->rcx		= rcx;
+		__entry->rdx		= rdx;
+	),
+
+	TP_printk("func %x rax %lx rbx %lx rcx %lx rdx %lx",
+		  __entry->function, __entry->rax,
+		  __entry->rbx, __entry->rcx, __entry->rdx)
+);
+
+/*
+ * Tracepoint for apic access.
+ */
+TRACE_EVENT(kvm_apic,
+	TP_PROTO(unsigned int rw, unsigned int reg, unsigned int val),
+	TP_ARGS(rw, reg, val),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	rw		)
+		__field(	unsigned int,	reg		)
+		__field(	unsigned int,	val		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->reg		= reg;
+		__entry->val		= val;
+	),
+
+	TP_printk("apic_%s 0x%x = 0x%x",
+		  __entry->rw ? "write" : "read",
+		  __entry->reg, __entry->val)
+);
+
+#define trace_kvm_apic_read(reg, val)		trace_kvm_apic(0, reg, val)
+#define trace_kvm_apic_write(reg, val)		trace_kvm_apic(1, reg, val)
+
+/*
+ * Tracepoint for kvm guest exit:
+ */
+TRACE_EVENT(kvm_exit,
+	TP_PROTO(unsigned int exit_reason, unsigned long guest_rip),
+	TP_ARGS(exit_reason, guest_rip),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	exit_reason	)
+		__field(	unsigned long,	guest_rip	)
+	),
+
+	TP_fast_assign(
+		__entry->exit_reason	= exit_reason;
+		__entry->guest_rip	= guest_rip;
+	),
+
+	TP_printk("reason %s rip 0x%lx",
+		 ftrace_print_symbols_seq(p, __entry->exit_reason,
+					  kvm_x86_ops->exit_reasons_str),
+		 __entry->guest_rip)
+);
+
+/*
+ * Tracepoint for kvm interrupt injection:
+ */
+TRACE_EVENT(kvm_inj_virq,
+	TP_PROTO(unsigned int irq),
+	TP_ARGS(irq),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	irq		)
+	),
+
+	TP_fast_assign(
+		__entry->irq		= irq;
+	),
+
+	TP_printk("irq %u", __entry->irq)
+);
+
+/*
+ * Tracepoint for page fault.
+ */
+TRACE_EVENT(kvm_page_fault,
+	TP_PROTO(unsigned long fault_address, unsigned int error_code),
+	TP_ARGS(fault_address, error_code),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	fault_address	)
+		__field(	unsigned int,	error_code	)
+	),
+
+	TP_fast_assign(
+		__entry->fault_address	= fault_address;
+		__entry->error_code	= error_code;
+	),
+
+	TP_printk("address %lx error_code %x",
+		  __entry->fault_address, __entry->error_code)
+);
+
+/*
+ * Tracepoint for guest MSR access.
+ */
+TRACE_EVENT(kvm_msr,
+	TP_PROTO(unsigned int rw, unsigned int ecx, unsigned long data),
+	TP_ARGS(rw, ecx, data),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	rw		)
+		__field(	unsigned int,	ecx		)
+		__field(	unsigned long,	data		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->ecx		= ecx;
+		__entry->data		= data;
+	),
+
+	TP_printk("msr_%s %x = 0x%lx",
+		  __entry->rw ? "write" : "read",
+		  __entry->ecx, __entry->data)
+);
+
+#define trace_kvm_msr_read(ecx, data)		trace_kvm_msr(0, ecx, data)
+#define trace_kvm_msr_write(ecx, data)		trace_kvm_msr(1, ecx, data)
+
+/*
+ * Tracepoint for guest CR access.
+ */
+TRACE_EVENT(kvm_cr,
+	TP_PROTO(unsigned int rw, unsigned int cr, unsigned long val),
+	TP_ARGS(rw, cr, val),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	rw		)
+		__field(	unsigned int,	cr		)
+		__field(	unsigned long,	val		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->cr		= cr;
+		__entry->val		= val;
+	),
+
+	TP_printk("cr_%s %x = 0x%lx",
+		  __entry->rw ? "write" : "read",
+		  __entry->cr, __entry->val)
+);
+
+#define trace_kvm_cr_read(cr, val)		trace_kvm_cr(0, cr, val)
+#define trace_kvm_cr_write(cr, val)		trace_kvm_cr(1, cr, val)
+
+#endif /* _TRACE_KVM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 1a84ca191cd..c6256b98f07 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -25,6 +25,7 @@
 #include <linux/highmem.h>
 #include <linux/sched.h>
 #include <linux/moduleparam.h>
+#include <linux/ftrace_event.h>
 #include "kvm_cache_regs.h"
 #include "x86.h"
 
@@ -34,6 +35,8 @@
 #include <asm/virtext.h>
 #include <asm/mce.h>
 
+#include "trace.h"
+
 #define __ex(x) __kvm_handle_fault_on_reboot(x)
 
 MODULE_AUTHOR("Qumranet");
@@ -2550,7 +2553,7 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu)
 	uint32_t intr;
 	int irq = vcpu->arch.interrupt.nr;
 
-	KVMTRACE_1D(INJ_VIRQ, vcpu, (u32)irq, handler);
+	trace_kvm_inj_virq(irq);
 
 	++vcpu->stat.irq_injections;
 	if (vmx->rmode.vm86_active) {
@@ -2751,8 +2754,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (enable_ept)
 			BUG();
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
-		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
-			    (u32)((u64)cr2 >> 32), handler);
+		trace_kvm_page_fault(cr2, error_code);
+
 		if (kvm_event_needs_reinjection(vcpu))
 			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
@@ -2799,7 +2802,6 @@ static int handle_external_interrupt(struct kvm_vcpu *vcpu,
 				     struct kvm_run *kvm_run)
 {
 	++vcpu->stat.irq_exits;
-	KVMTRACE_1D(INTR, vcpu, vmcs_read32(VM_EXIT_INTR_INFO), handler);
 	return 1;
 }
 
@@ -2847,7 +2849,7 @@ vmx_patch_hypercall(struct kvm_vcpu *vcpu, unsigned char *hypercall)
 
 static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
-	unsigned long exit_qualification;
+	unsigned long exit_qualification, val;
 	int cr;
 	int reg;
 
@@ -2856,21 +2858,19 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	reg = (exit_qualification >> 8) & 15;
 	switch ((exit_qualification >> 4) & 3) {
 	case 0: /* mov to cr */
-		KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr,
-			    (u32)kvm_register_read(vcpu, reg),
-			    (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
-			    handler);
+		val = kvm_register_read(vcpu, reg);
+		trace_kvm_cr_write(cr, val);
 		switch (cr) {
 		case 0:
-			kvm_set_cr0(vcpu, kvm_register_read(vcpu, reg));
+			kvm_set_cr0(vcpu, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 3:
-			kvm_set_cr3(vcpu, kvm_register_read(vcpu, reg));
+			kvm_set_cr3(vcpu, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 4:
-			kvm_set_cr4(vcpu, kvm_register_read(vcpu, reg));
+			kvm_set_cr4(vcpu, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 8: {
@@ -2892,23 +2892,19 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		vcpu->arch.cr0 &= ~X86_CR0_TS;
 		vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
 		vmx_fpu_activate(vcpu);
-		KVMTRACE_0D(CLTS, vcpu, handler);
 		skip_emulated_instruction(vcpu);
 		return 1;
 	case 1: /*mov from cr*/
 		switch (cr) {
 		case 3:
 			kvm_register_write(vcpu, reg, vcpu->arch.cr3);
-			KVMTRACE_3D(CR_READ, vcpu, (u32)cr,
-				    (u32)kvm_register_read(vcpu, reg),
-				    (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
-				    handler);
+			trace_kvm_cr_read(cr, vcpu->arch.cr3);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 8:
-			kvm_register_write(vcpu, reg, kvm_get_cr8(vcpu));
-			KVMTRACE_2D(CR_READ, vcpu, (u32)cr,
-				    (u32)kvm_register_read(vcpu, reg), handler);
+			val = kvm_get_cr8(vcpu);
+			kvm_register_write(vcpu, reg, val);
+			trace_kvm_cr_read(cr, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		}
@@ -2976,7 +2972,6 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			val = 0;
 		}
 		kvm_register_write(vcpu, reg, val);
-		KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
 	} else {
 		val = vcpu->arch.regs[reg];
 		switch (dr) {
@@ -3009,7 +3004,6 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			}
 			break;
 		}
-		KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)val, handler);
 	}
 	skip_emulated_instruction(vcpu);
 	return 1;
@@ -3031,8 +3025,7 @@ static int handle_rdmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		return 1;
 	}
 
-	KVMTRACE_3D(MSR_READ, vcpu, ecx, (u32)data, (u32)(data >> 32),
-		    handler);
+	trace_kvm_msr_read(ecx, data);
 
 	/* FIXME: handling of bits 32:63 of rax, rdx */
 	vcpu->arch.regs[VCPU_REGS_RAX] = data & -1u;
@@ -3047,8 +3040,7 @@ static int handle_wrmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	u64 data = (vcpu->arch.regs[VCPU_REGS_RAX] & -1u)
 		| ((u64)(vcpu->arch.regs[VCPU_REGS_RDX] & -1u) << 32);
 
-	KVMTRACE_3D(MSR_WRITE, vcpu, ecx, (u32)data, (u32)(data >> 32),
-		    handler);
+	trace_kvm_msr_write(ecx, data);
 
 	if (vmx_set_msr(vcpu, ecx, data) != 0) {
 		kvm_inject_gp(vcpu, 0);
@@ -3075,7 +3067,6 @@ static int handle_interrupt_window(struct kvm_vcpu *vcpu,
 	cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_INTR_PENDING;
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
 
-	KVMTRACE_0D(PEND_INTR, vcpu, handler);
 	++vcpu->stat.irq_window_exits;
 
 	/*
@@ -3227,6 +3218,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+	trace_kvm_page_fault(gpa, exit_qualification);
 	return kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
 }
 
@@ -3410,8 +3402,7 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	u32 exit_reason = vmx->exit_reason;
 	u32 vectoring_info = vmx->idt_vectoring_info;
 
-	KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)kvm_rip_read(vcpu),
-		    (u32)((u64)kvm_rip_read(vcpu) >> 32), entryexit);
+	trace_kvm_exit(exit_reason, kvm_rip_read(vcpu));
 
 	/* If we need to emulate an MMIO from handle_invalid_guest_state
 	 * we just return 0 */
@@ -3500,10 +3491,8 @@ static void vmx_complete_interrupts(struct vcpu_vmx *vmx)
 
 	/* We need to handle NMIs before interrupts are enabled */
 	if ((exit_intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR &&
-	    (exit_intr_info & INTR_INFO_VALID_MASK)) {
-		KVMTRACE_0D(NMI, &vmx->vcpu, handler);
+	    (exit_intr_info & INTR_INFO_VALID_MASK))
 		asm("int $2");
-	}
 
 	idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK;
 
@@ -3891,6 +3880,29 @@ static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	return ret;
 }
 
+static const struct trace_print_flags vmx_exit_reasons_str[] = {
+	{ EXIT_REASON_EXCEPTION_NMI,           "exception" },
+	{ EXIT_REASON_EXTERNAL_INTERRUPT,      "ext_irq" },
+	{ EXIT_REASON_TRIPLE_FAULT,            "triple_fault" },
+	{ EXIT_REASON_NMI_WINDOW,              "nmi_window" },
+	{ EXIT_REASON_IO_INSTRUCTION,          "io_instruction" },
+	{ EXIT_REASON_CR_ACCESS,               "cr_access" },
+	{ EXIT_REASON_DR_ACCESS,               "dr_access" },
+	{ EXIT_REASON_CPUID,                   "cpuid" },
+	{ EXIT_REASON_MSR_READ,                "rdmsr" },
+	{ EXIT_REASON_MSR_WRITE,               "wrmsr" },
+	{ EXIT_REASON_PENDING_INTERRUPT,       "interrupt_window" },
+	{ EXIT_REASON_HLT,                     "halt" },
+	{ EXIT_REASON_INVLPG,                  "invlpg" },
+	{ EXIT_REASON_VMCALL,                  "hypercall" },
+	{ EXIT_REASON_TPR_BELOW_THRESHOLD,     "tpr_below_thres" },
+	{ EXIT_REASON_APIC_ACCESS,             "apic_access" },
+	{ EXIT_REASON_WBINVD,                  "wbinvd" },
+	{ EXIT_REASON_TASK_SWITCH,             "task_switch" },
+	{ EXIT_REASON_EPT_VIOLATION,           "ept_violation" },
+	{ -1, NULL }
+};
+
 static struct kvm_x86_ops vmx_x86_ops = {
 	.cpu_has_kvm_support = cpu_has_kvm_support,
 	.disabled_by_bios = vmx_disabled_by_bios,
@@ -3950,6 +3962,8 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.set_tss_addr = vmx_set_tss_addr,
 	.get_tdp_level = get_ept_level,
 	.get_mt_mask = vmx_get_mt_mask,
+
+	.exit_reasons_str = vmx_exit_reasons_str,
 };
 
 static int __init vmx_init(void)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a066876f137..892a7a60c81 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -37,6 +37,8 @@
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>
 #include <linux/cpufreq.h>
+#define CREATE_TRACE_POINTS
+#include "trace.h"
 
 #include <asm/uaccess.h>
 #include <asm/msr.h>
@@ -347,9 +349,6 @@ EXPORT_SYMBOL_GPL(kvm_set_cr0);
 void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
 {
 	kvm_set_cr0(vcpu, (vcpu->arch.cr0 & ~0x0ful) | (msw & 0x0f));
-	KVMTRACE_1D(LMSW, vcpu,
-		    (u32)((vcpu->arch.cr0 & ~0x0ful) | (msw & 0x0f)),
-		    handler);
 }
 EXPORT_SYMBOL_GPL(kvm_lmsw);
 
@@ -2568,7 +2567,6 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 
 int emulate_clts(struct kvm_vcpu *vcpu)
 {
-	KVMTRACE_0D(CLTS, vcpu, handler);
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
 	return X86EMUL_CONTINUE;
 }
@@ -2851,12 +2849,8 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	vcpu->arch.pio.down = 0;
 	vcpu->arch.pio.rep = 0;
 
-	if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
-		KVMTRACE_2D(IO_READ, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
-	else
-		KVMTRACE_2D(IO_WRITE, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
+	trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
+		      size, 1);
 
 	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	memcpy(vcpu->arch.pio_data, &val, 4);
@@ -2892,12 +2886,8 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	vcpu->arch.pio.down = down;
 	vcpu->arch.pio.rep = rep;
 
-	if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
-		KVMTRACE_2D(IO_READ, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
-	else
-		KVMTRACE_2D(IO_WRITE, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
+	trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
+		      size, count);
 
 	if (!count) {
 		kvm_x86_ops->skip_emulated_instruction(vcpu);
@@ -3075,7 +3065,6 @@ void kvm_arch_exit(void)
 int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 {
 	++vcpu->stat.halt_exits;
-	KVMTRACE_0D(HLT, vcpu, handler);
 	if (irqchip_in_kernel(vcpu->kvm)) {
 		vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
 		return 1;
@@ -3106,7 +3095,7 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 	a2 = kvm_register_read(vcpu, VCPU_REGS_RDX);
 	a3 = kvm_register_read(vcpu, VCPU_REGS_RSI);
 
-	KVMTRACE_1D(VMMCALL, vcpu, (u32)nr, handler);
+	trace_kvm_hypercall(nr, a0, a1, a2, a3);
 
 	if (!is_long_mode(vcpu)) {
 		nr &= 0xFFFFFFFF;
@@ -3206,8 +3195,6 @@ unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
 		return 0;
 	}
-	KVMTRACE_3D(CR_READ, vcpu, (u32)cr, (u32)value,
-		    (u32)((u64)value >> 32), handler);
 
 	return value;
 }
@@ -3215,9 +3202,6 @@ unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
 		     unsigned long *rflags)
 {
-	KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)val,
-		    (u32)((u64)val >> 32), handler);
-
 	switch (cr) {
 	case 0:
 		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
@@ -3327,11 +3311,11 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 		kvm_register_write(vcpu, VCPU_REGS_RDX, best->edx);
 	}
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
-	KVMTRACE_5D(CPUID, vcpu, function,
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RAX),
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RBX),
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RCX),
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RDX), handler);
+	trace_kvm_cpuid(function,
+			kvm_register_read(vcpu, VCPU_REGS_RAX),
+			kvm_register_read(vcpu, VCPU_REGS_RBX),
+			kvm_register_read(vcpu, VCPU_REGS_RCX),
+			kvm_register_read(vcpu, VCPU_REGS_RDX));
 }
 EXPORT_SYMBOL_GPL(kvm_emulate_cpuid);
 
@@ -3527,7 +3511,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		set_debugreg(vcpu->arch.eff_db[3], 3);
 	}
 
-	KVMTRACE_0D(VMENTRY, vcpu, entryexit);
+	trace_kvm_entry(vcpu->vcpu_id);
 	kvm_x86_ops->run(vcpu, kvm_run);
 
 	if (unlikely(vcpu->arch.switch_db_regs)) {
@@ -4842,3 +4826,9 @@ int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
 	return kvm_x86_ops->interrupt_allowed(vcpu);
 }
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_msr);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_cr);
-- 
cgit v1.2.3


From 0cb5762ed2b3113b3b8aa84d1d26b815aea71787 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 17 Jun 2009 15:50:31 +0200
Subject: KVM: Allow emulation of syscalls instructions on #UD

Add the opcodes for syscall, sysenter and sysexit to the list of instructions
handled by the undefined opcode handler.

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 892a7a60c81..57e76b37242 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2667,14 +2667,33 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 
-		/* Reject the instructions other than VMCALL/VMMCALL when
-		 * try to emulate invalid opcode */
+		/* Only allow emulation of specific instructions on #UD
+		 * (namely VMMCALL, sysenter, sysexit, syscall)*/
 		c = &vcpu->arch.emulate_ctxt.decode;
-		if ((emulation_type & EMULTYPE_TRAP_UD) &&
-		    (!(c->twobyte && c->b == 0x01 &&
-		      (c->modrm_reg == 0 || c->modrm_reg == 3) &&
-		       c->modrm_mod == 3 && c->modrm_rm == 1)))
-			return EMULATE_FAIL;
+		if (emulation_type & EMULTYPE_TRAP_UD) {
+			if (!c->twobyte)
+				return EMULATE_FAIL;
+			switch (c->b) {
+			case 0x01: /* VMMCALL */
+				if (c->modrm_mod != 3 || c->modrm_rm != 1)
+					return EMULATE_FAIL;
+				break;
+			case 0x34: /* sysenter */
+			case 0x35: /* sysexit */
+				if (c->modrm_mod != 0 || c->modrm_rm != 0)
+					return EMULATE_FAIL;
+				break;
+			case 0x05: /* syscall */
+				if (c->modrm_mod != 0 || c->modrm_rm != 0)
+					return EMULATE_FAIL;
+				break;
+			default:
+				return EMULATE_FAIL;
+			}
+
+			if (!(c->modrm_reg == 0 || c->modrm_reg == 3))
+				return EMULATE_FAIL;
+		}
 
 		++vcpu->stat.insn_emulation;
 		if (r)  {
-- 
cgit v1.2.3


From b1d861431ed58f752b31e8c07da029072989bec7 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 17 Jun 2009 15:50:32 +0200
Subject: KVM: x86 emulator: Add missing EFLAGS bit definitions

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index ef4dfca3ed7..67af33aeb3f 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -320,8 +320,11 @@ static u32 group2_table[] = {
 };
 
 /* EFLAGS bit definitions. */
+#define EFLG_VM (1<<17)
+#define EFLG_RF (1<<16)
 #define EFLG_OF (1<<11)
 #define EFLG_DF (1<<10)
+#define EFLG_IF (1<<9)
 #define EFLG_SF (1<<7)
 #define EFLG_ZF (1<<6)
 #define EFLG_AF (1<<4)
-- 
cgit v1.2.3


From e99f0507125f45b723a9069e9e854c3c4758e7ba Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 17 Jun 2009 15:50:33 +0200
Subject: KVM: x86 emulator: Prepare for emulation of syscall instructions

Add the flags needed for syscall, sysenter and sysexit to the opcode table.
Catch (but for now ignore) the opcodes in the emulation switch/case.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 67af33aeb3f..b0da29d7403 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -32,6 +32,8 @@
 #include <linux/module.h>
 #include <asm/kvm_x86_emulate.h>
 
+#include "mmu.h"		/* for is_long_mode() */
+
 /*
  * Opcode effective-address decode tables.
  * Note that we only emulate instructions that have at least one memory
@@ -209,7 +211,7 @@ static u32 opcode_table[256] = {
 
 static u32 twobyte_table[256] = {
 	/* 0x00 - 0x0F */
-	0, Group | GroupDual | Group7, 0, 0, 0, 0, ImplicitOps, 0,
+	0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
 	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
 	/* 0x10 - 0x1F */
 	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
@@ -217,7 +219,9 @@ static u32 twobyte_table[256] = {
 	ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x30 - 0x3F */
-	ImplicitOps, 0, ImplicitOps, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	ImplicitOps, 0, ImplicitOps, 0,
+	ImplicitOps, ImplicitOps, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x40 - 0x47 */
 	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
 	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
@@ -1988,6 +1992,9 @@ twobyte_insn:
 			goto cannot_emulate;
 		}
 		break;
+	case 0x05: 		/* syscall */
+		goto cannot_emulate;
+		break;
 	case 0x06:
 		emulate_clts(ctxt->vcpu);
 		c->dst.type = OP_NONE;
@@ -2054,6 +2061,12 @@ twobyte_insn:
 		rc = X86EMUL_CONTINUE;
 		c->dst.type = OP_NONE;
 		break;
+	case 0x34:		/* sysenter */
+		goto cannot_emulate;
+		break;
+	case 0x35:		/* sysexit */
+		goto cannot_emulate;
+		break;
 	case 0x40 ... 0x4f:	/* cmov */
 		c->dst.val = c->dst.orig_val = c->src.val;
 		if (!test_cc(c->b, ctxt->eflags))
-- 
cgit v1.2.3


From e66bb2ccdcf76d032bbb464b35c292bb3ee58f9b Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 18 Jun 2009 12:56:00 +0200
Subject: KVM: x86 emulator: add syscall emulation

Handle #UD intercept of the syscall instruction in 32bit compat mode on
an Intel host.
Setup the segment descriptors for CS and SS and the EIP/ESP registers
according to the manual. Save the RIP and EFLAGS to the correct registers.

[avi: fix build on i386 due to missing R11]

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 84 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 83 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index b0da29d7403..4d7256da59d 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1397,6 +1397,85 @@ static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
 		ctxt->interruptibility = mask;
 }
 
+static inline void
+setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
+	struct kvm_segment *cs, struct kvm_segment *ss)
+{
+	memset(cs, 0, sizeof(struct kvm_segment));
+	kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
+	memset(ss, 0, sizeof(struct kvm_segment));
+
+	cs->l = 0;		/* will be adjusted later */
+	cs->base = 0;		/* flat segment */
+	cs->g = 1;		/* 4kb granularity */
+	cs->limit = 0xffffffff;	/* 4GB limit */
+	cs->type = 0x0b;	/* Read, Execute, Accessed */
+	cs->s = 1;
+	cs->dpl = 0;		/* will be adjusted later */
+	cs->present = 1;
+	cs->db = 1;
+
+	ss->unusable = 0;
+	ss->base = 0;		/* flat segment */
+	ss->limit = 0xffffffff;	/* 4GB limit */
+	ss->g = 1;		/* 4kb granularity */
+	ss->s = 1;
+	ss->type = 0x03;	/* Read/Write, Accessed */
+	ss->db = 1;		/* 32bit stack segment */
+	ss->dpl = 0;
+	ss->present = 1;
+}
+
+static int
+emulate_syscall(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* syscall is not available in real mode */
+	if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+	msr_data >>= 32;
+	cs.selector = (u16)(msr_data & 0xfffc);
+	ss.selector = (u16)(msr_data + 8);
+
+	if (is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->regs[VCPU_REGS_RCX] = c->eip;
+	if (is_long_mode(ctxt->vcpu)) {
+#ifdef CONFIG_X86_64
+		c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu,
+			ctxt->mode == X86EMUL_MODE_PROT64 ?
+			MSR_LSTAR : MSR_CSTAR, &msr_data);
+		c->eip = msr_data;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
+		ctxt->eflags &= ~(msr_data | EFLG_RF);
+#endif
+	} else {
+		/* legacy mode */
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+		c->eip = (u32)msr_data;
+
+		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	}
+
+	return 0;
+}
+
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
@@ -1993,7 +2072,10 @@ twobyte_insn:
 		}
 		break;
 	case 0x05: 		/* syscall */
-		goto cannot_emulate;
+		if (emulate_syscall(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
 		break;
 	case 0x06:
 		emulate_clts(ctxt->vcpu);
-- 
cgit v1.2.3


From 8c60435261deaefeb53ce3222d04d7d5bea81296 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 18 Jun 2009 12:56:01 +0200
Subject: KVM: x86 emulator: Add sysenter emulation

Handle #UD intercept of the sysenter instruction in 32bit compat mode on
an AMD host.
Setup the segment descriptors for CS and SS and the EIP/ESP registers
according to the manual.

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 70 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 4d7256da59d..7a9bddb3ebd 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1476,6 +1476,71 @@ emulate_syscall(struct x86_emulate_ctxt *ctxt)
 	return 0;
 }
 
+static int
+emulate_sysenter(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL ||
+		!(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* XXX sysenter/sysexit have not been tested in 64bit mode.
+	* Therefore, we inject an #UD.
+	*/
+	if (ctxt->mode == X86EMUL_MODE_PROT64)
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (ctxt->mode) {
+	case X86EMUL_MODE_PROT32:
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	case X86EMUL_MODE_PROT64:
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	}
+
+	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	cs.selector = (u16)msr_data;
+	cs.selector &= ~SELECTOR_RPL_MASK;
+	ss.selector = cs.selector + 8;
+	ss.selector &= ~SELECTOR_RPL_MASK;
+	if (ctxt->mode == X86EMUL_MODE_PROT64
+		|| is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
+	c->eip = msr_data;
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
+	c->regs[VCPU_REGS_RSP] = msr_data;
+
+	return 0;
+}
+
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
@@ -2144,7 +2209,10 @@ twobyte_insn:
 		c->dst.type = OP_NONE;
 		break;
 	case 0x34:		/* sysenter */
-		goto cannot_emulate;
+		if (emulate_sysenter(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
 		break;
 	case 0x35:		/* sysexit */
 		goto cannot_emulate;
-- 
cgit v1.2.3


From 4668f050787015805a7e8ea29cc4f81d8f07cedb Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 18 Jun 2009 12:56:02 +0200
Subject: KVM: x86 emulator: Add sysexit emulation

Handle #UD intercept of the sysexit instruction in 64bit mode returning to
32bit compat mode on an AMD host.
Setup the segment descriptors for CS and SS and the EIP/ESP registers
according to the manual.

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 72 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 7a9bddb3ebd..c6663d46f32 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1541,6 +1541,73 @@ emulate_sysenter(struct x86_emulate_ctxt *ctxt)
 	return 0;
 }
 
+static int
+emulate_sysexit(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+	int usermode;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* sysexit must be called from CPL 0 */
+	if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	if ((c->rex_prefix & 0x8) != 0x0)
+		usermode = X86EMUL_MODE_PROT64;
+	else
+		usermode = X86EMUL_MODE_PROT32;
+
+	cs.dpl = 3;
+	ss.dpl = 3;
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (usermode) {
+	case X86EMUL_MODE_PROT32:
+		cs.selector = (u16)(msr_data + 16);
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = (u16)(msr_data + 24);
+		break;
+	case X86EMUL_MODE_PROT64:
+		cs.selector = (u16)(msr_data + 32);
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = cs.selector + 8;
+		cs.db = 0;
+		cs.l = 1;
+		break;
+	}
+	cs.selector |= SELECTOR_RPL_MASK;
+	ss.selector |= SELECTOR_RPL_MASK;
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
+	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
+
+	return 0;
+}
+
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
@@ -2215,7 +2282,10 @@ twobyte_insn:
 			goto writeback;
 		break;
 	case 0x35:		/* sysexit */
-		goto cannot_emulate;
+		if (emulate_sysexit(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
 		break;
 	case 0x40 ... 0x4f:	/* cmov */
 		c->dst.val = c->dst.orig_val = c->src.val;
-- 
cgit v1.2.3


From ec04b2604c3707a46db1d26d98f82b11d0844669 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 19 Jun 2009 15:16:23 +0200
Subject: KVM: Prepare memslot data structures for multiple hugepage sizes

[avi: fix build on non-x86]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_host.h    |  3 ++-
 arch/powerpc/include/asm/kvm_host.h |  3 ++-
 arch/s390/include/asm/kvm_host.h    |  6 +++++-
 arch/x86/include/asm/kvm_host.h     | 12 ++++++------
 arch/x86/kvm/mmu.c                  | 30 ++++++++++++++++--------------
 arch/x86/kvm/paging_tmpl.h          |  3 ++-
 6 files changed, 33 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 9cf1c4b1f92..d9b6325a932 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -235,7 +235,8 @@ struct kvm_vm_data {
 #define KVM_REQ_PTC_G		32
 #define KVM_REQ_RESUME		33
 
-#define KVM_PAGES_PER_HPAGE	1
+#define KVM_NR_PAGE_SIZES	1
+#define KVM_PAGES_PER_HPAGE(x)	1
 
 struct kvm;
 struct kvm_vcpu;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index d4caa6127f5..c9c930ed11d 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -34,7 +34,8 @@
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 
 /* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1UL << 31)
+#define KVM_NR_PAGE_SIZES	1
+#define KVM_PAGES_PER_HPAGE(x)	(1UL<<31)
 
 struct kvm;
 struct kvm_run;
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 75535d4d7a0..78e07a622b4 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -40,7 +40,11 @@ struct sca_block {
 	struct sca_entry cpu[64];
 } __attribute__((packed));
 
-#define KVM_PAGES_PER_HPAGE 256
+#define KVM_NR_PAGE_SIZES 2
+#define KVM_HPAGE_SHIFT(x) (PAGE_SHIFT + ((x) - 1) * 8)
+#define KVM_HPAGE_SIZE(x) (1UL << KVM_HPAGE_SHIFT(x))
+#define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
+#define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
 #define CPUSTAT_HOST       0x80000000
 #define CPUSTAT_WAIT       0x10000000
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 19027ab2041..30b625d8e5f 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -54,12 +54,12 @@
 #define INVALID_PAGE (~(hpa_t)0)
 #define UNMAPPED_GVA (~(gpa_t)0)
 
-/* shadow tables are PAE even on non-PAE hosts */
-#define KVM_HPAGE_SHIFT 21
-#define KVM_HPAGE_SIZE (1UL << KVM_HPAGE_SHIFT)
-#define KVM_HPAGE_MASK (~(KVM_HPAGE_SIZE - 1))
-
-#define KVM_PAGES_PER_HPAGE (KVM_HPAGE_SIZE / PAGE_SIZE)
+/* KVM Hugepage definitions for x86 */
+#define KVM_NR_PAGE_SIZES	2
+#define KVM_HPAGE_SHIFT(x)	(PAGE_SHIFT + (((x) - 1) * 9))
+#define KVM_HPAGE_SIZE(x)	(1UL << KVM_HPAGE_SHIFT(x))
+#define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
+#define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
 #define DE_VECTOR 0
 #define DB_VECTOR 1
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 12974de88aa..b67585c1ef0 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -394,9 +394,9 @@ static int *slot_largepage_idx(gfn_t gfn, struct kvm_memory_slot *slot)
 {
 	unsigned long idx;
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE);
-	return &slot->lpage_info[idx].write_count;
+	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
+	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
+	return &slot->lpage_info[0][idx].write_count;
 }
 
 static void account_shadowed(struct kvm *kvm, gfn_t gfn)
@@ -485,10 +485,10 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
 	if (!lpage)
 		return &slot->rmap[gfn - slot->base_gfn];
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE);
+	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
+	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
 
-	return &slot->lpage_info[idx].rmap_pde;
+	return &slot->lpage_info[0][idx].rmap_pde;
 }
 
 /*
@@ -731,11 +731,11 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 		end = start + (memslot->npages << PAGE_SHIFT);
 		if (hva >= start && hva < end) {
 			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+			int idx = gfn_offset /
+			          KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL);
 			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
 			retval |= handler(kvm,
-					  &memslot->lpage_info[
-						  gfn_offset /
-						  KVM_PAGES_PER_HPAGE].rmap_pde);
+					&memslot->lpage_info[0][idx].rmap_pde);
 		}
 	}
 
@@ -1876,8 +1876,9 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	pfn_t pfn;
 	unsigned long mmu_seq;
 
-	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
+	if (is_largepage_backed(vcpu, gfn &
+			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
 
@@ -2082,8 +2083,9 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	if (r)
 		return r;
 
-	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
+	if (is_largepage_backed(vcpu, gfn &
+			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
@@ -2485,7 +2487,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
 	if (is_large_pte(gpte) && is_largepage_backed(vcpu, gfn)) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
+		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
 	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 322e8113aee..53e129cec5f 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -401,7 +401,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 
 	if (walker.level == PT_DIRECTORY_LEVEL) {
 		gfn_t large_gfn;
-		large_gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE-1);
+		large_gfn = walker.gfn &
+			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		if (is_largepage_backed(vcpu, large_gfn)) {
 			walker.gfn = large_gfn;
 			largepage = 1;
-- 
cgit v1.2.3


From 894a9c5543abf6f88d36dc1b9f5d90f35db09cb3 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 23 Jun 2009 15:05:14 -0300
Subject: KVM: x86: missing locking in PIT/IRQCHIP/SET_BSP_CPU ioctl paths

Correct missing locking in a few places in x86's vm_ioctl handling path.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c |  2 --
 arch/x86/kvm/x86.c   | 12 ++++++++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 15fc95b2fc0..bcd00c76d69 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -345,9 +345,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 
 void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val)
 {
-	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	pit_load_count(kvm, channel, val);
-	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 }
 
 static inline struct kvm_pit *dev_to_pit(struct kvm_io_device *dev)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 57e76b37242..e9b0982d258 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1987,19 +1987,25 @@ static int kvm_vm_ioctl_set_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 	r = 0;
 	switch (chip->chip_id) {
 	case KVM_IRQCHIP_PIC_MASTER:
+		spin_lock(&pic_irqchip(kvm)->lock);
 		memcpy(&pic_irqchip(kvm)->pics[0],
 			&chip->chip.pic,
 			sizeof(struct kvm_pic_state));
+		spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_PIC_SLAVE:
+		spin_lock(&pic_irqchip(kvm)->lock);
 		memcpy(&pic_irqchip(kvm)->pics[1],
 			&chip->chip.pic,
 			sizeof(struct kvm_pic_state));
+		spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_IOAPIC:
+		mutex_lock(&kvm->irq_lock);
 		memcpy(ioapic_irqchip(kvm),
 			&chip->chip.ioapic,
 			sizeof(struct kvm_ioapic_state));
+		mutex_unlock(&kvm->irq_lock);
 		break;
 	default:
 		r = -EINVAL;
@@ -2013,7 +2019,9 @@ static int kvm_vm_ioctl_get_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
 	int r = 0;
 
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(ps, &kvm->arch.vpit->pit_state, sizeof(struct kvm_pit_state));
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
 
@@ -2021,8 +2029,10 @@ static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
 	int r = 0;
 
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
 	kvm_pit_load_count(kvm, 0, ps->channels[0].count);
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
 
@@ -2031,7 +2041,9 @@ static int kvm_vm_ioctl_reinject(struct kvm *kvm,
 {
 	if (!kvm->arch.vpit)
 		return -ENXIO;
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	kvm->arch.vpit->pit_state.pit_timer.reinject = control->pit_reinject;
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 8f1589d95e5eab1ed287f217a33656e922cdbdd0 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 24 Jun 2009 12:44:33 +0200
Subject: KVM: ignore AMDs HWCR register access to set the FFDIS bit

Linux tries to disable the flush filter on all AMD K8 CPUs. Since KVM
does not handle the needed MSR, the injected #GP will panic the Linux
kernel. Ignore setting of the HWCR.FFDIS bit in this MSR to let Linux
boot with an AMD K8 family guest CPU.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 1 -
 arch/x86/kvm/x86.c | 8 ++++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b1c44620886..8728e514c85 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2137,7 +2137,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		break;
 	case MSR_VM_CR:
 	case MSR_VM_IGNNE:
-	case MSR_K7_HWCR:
 		pr_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
 		break;
 	default:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e9b0982d258..cae5b12bf93 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -833,6 +833,14 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_EFER:
 		set_efer(vcpu, data);
 		break;
+	case MSR_K7_HWCR:
+		data &= ~(u64)0x40;	/* ignore flush filter disable */
+		if (data != 0) {
+			pr_unimpl(vcpu, "unimplemented HWCR wrmsr: 0x%llx\n",
+				data);
+			return 1;
+		}
+		break;
 	case MSR_IA32_DEBUGCTLMSR:
 		if (!data) {
 			/* We support the non-activated case already */
-- 
cgit v1.2.3


From 1fdbd48c242db996107f72ae4140ffe8163e26a8 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 24 Jun 2009 12:44:34 +0200
Subject: KVM: ignore reads from AMDs C1E enabled MSR

If the Linux kernel detects an C1E capable AMD processor (K8 RevF and
higher), it will access a certain MSR on every attempt to go to halt.
Explicitly handle this read and return 0 to let KVM run a Linux guest
with the native AMD host CPU propagated to the guest.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cae5b12bf93..6aace61fdb6 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1038,6 +1038,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
 	case MSR_K7_EVNTSEL0:
+	case MSR_K8_INT_PENDING_MSG:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From ed85c0685321a139cefd6622b21467643f0159e1 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 25 Jun 2009 12:36:49 +0200
Subject: KVM: introduce module parameter for ignoring unknown MSRs accesses

KVM will inject a #GP into the guest if that tries to access unhandled
MSRs. This will crash many guests. Although it would be the correct
way to actually handle these MSRs, we introduce a runtime switchable
module param called "ignore_msrs" (defaults to 0). If this is Y, unknown
MSR reads will return 0, while MSR writes are simply dropped. In both cases
we print a message to dmesg to inform the user about that.

You can change the behaviour at any time by saying:

 # echo 1 > /sys/modules/kvm/parameters/ignore_msrs

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6aace61fdb6..0be75d53b7f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -83,6 +83,9 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
 struct kvm_x86_ops *kvm_x86_ops;
 EXPORT_SYMBOL_GPL(kvm_x86_ops);
 
+int ignore_msrs = 0;
+module_param_named(ignore_msrs, ignore_msrs, bool, S_IRUGO | S_IWUSR);
+
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "pf_fixed", VCPU_STAT(pf_fixed) },
 	{ "pf_guest", VCPU_STAT(pf_guest) },
@@ -930,8 +933,15 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			"0x%x data 0x%llx\n", msr, data);
 		break;
 	default:
-		pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data);
-		return 1;
+		if (!ignore_msrs) {
+			pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n",
+				msr, data);
+			return 1;
+		} else {
+			pr_unimpl(vcpu, "ignored wrmsr: 0x%x data %llx\n",
+				msr, data);
+			break;
+		}
 	}
 	return 0;
 }
@@ -1078,8 +1088,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
 		return get_msr_mce(vcpu, msr, pdata);
 	default:
-		pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
-		return 1;
+		if (!ignore_msrs) {
+			pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
+			return 1;
+		} else {
+			pr_unimpl(vcpu, "ignored rdmsr: 0x%x\n", msr);
+			data = 0;
+		}
+		break;
 	}
 	*pdata = data;
 	return 0;
-- 
cgit v1.2.3


From 46f43c6ee022c3aeb9686b104234b9f27fac03c2 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 18 Jun 2009 11:47:27 -0300
Subject: KVM: powerpc: convert marker probes to event trace

[avi: make it build]
[avi: fold trace-arch.h into trace.h]

CC: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/44x_tlb.c  |  11 ++---
 arch/powerpc/kvm/Makefile   |   4 ++
 arch/powerpc/kvm/e500_tlb.c |  16 +++----
 arch/powerpc/kvm/emulate.c  |   3 +-
 arch/powerpc/kvm/powerpc.c  |   3 ++
 arch/powerpc/kvm/trace.h    | 104 ++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 126 insertions(+), 15 deletions(-)
 create mode 100644 arch/powerpc/kvm/trace.h

(limited to 'arch')

diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 4a16f472cc1..ff3cb63b811 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -30,6 +30,7 @@
 #include "timing.h"
 
 #include "44x_tlb.h"
+#include "trace.h"
 
 #ifndef PPC44x_TLBE_SIZE
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_4K
@@ -263,7 +264,7 @@ static void kvmppc_44x_shadow_release(struct kvmppc_vcpu_44x *vcpu_44x,
 
 	/* XXX set tlb_44x_index to stlb_index? */
 
-	KVMTRACE_1D(STLB_INVAL, &vcpu_44x->vcpu, stlb_index, handler);
+	trace_kvm_stlb_inval(stlb_index);
 }
 
 void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
@@ -365,8 +366,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
 	/* Insert shadow mapping into hardware TLB. */
 	kvmppc_44x_tlbe_set_modified(vcpu_44x, victim);
 	kvmppc_44x_tlbwe(victim, &stlbe);
-	KVMTRACE_5D(STLB_WRITE, vcpu, victim, stlbe.tid, stlbe.word0, stlbe.word1,
-	            stlbe.word2, handler);
+	trace_kvm_stlb_write(victim, stlbe.tid, stlbe.word0, stlbe.word1,
+			     stlbe.word2);
 }
 
 /* For a particular guest TLB entry, invalidate the corresponding host TLB
@@ -485,8 +486,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws)
 		kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index);
 	}
 
-	KVMTRACE_5D(GTLB_WRITE, vcpu, gtlb_index, tlbe->tid, tlbe->word0,
-	            tlbe->word1, tlbe->word2, handler);
+	trace_kvm_gtlb_write(gtlb_index, tlbe->tid, tlbe->word0, tlbe->word1,
+			     tlbe->word2);
 
 	kvmppc_set_exit_type(vcpu, EMULATED_TLBWE_EXITS);
 	return EMULATE_DONE;
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 459c7ee580f..4f407f2662f 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -10,6 +10,10 @@ common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
 common-objs-$(CONFIG_KVM_TRACE)  += $(addprefix ../../../virt/kvm/, kvm_trace.o)
 
+CFLAGS_44x_tlb.o  := -I.
+CFLAGS_e500_tlb.o := -I.
+CFLAGS_emulate.o  := -I.
+
 kvm-objs := $(common-objs-y) powerpc.o emulate.o
 obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index a2048ac095a..fb1e1dc11ba 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -22,6 +22,7 @@
 
 #include "../mm/mmu_decl.h"
 #include "e500_tlb.h"
+#include "trace.h"
 
 #define to_htlb1_esel(esel) (tlb1_entry_num - (esel) - 1)
 
@@ -224,9 +225,8 @@ static void kvmppc_e500_stlbe_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
 
 	kvmppc_e500_shadow_release(vcpu_e500, tlbsel, esel);
 	stlbe->mas1 = 0;
-	KVMTRACE_5D(STLB_INVAL, &vcpu_e500->vcpu, index_of(tlbsel, esel),
-			stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
-			handler);
+	trace_kvm_stlb_inval(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2,
+			     stlbe->mas3, stlbe->mas7);
 }
 
 static void kvmppc_e500_tlb1_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
@@ -319,9 +319,8 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 				vcpu_e500->vcpu.arch.msr & MSR_PR);
 	stlbe->mas7 = (hpaddr >> 32) & MAS7_RPN;
 
-	KVMTRACE_5D(STLB_WRITE, &vcpu_e500->vcpu, index_of(tlbsel, esel),
-			stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
-			handler);
+	trace_kvm_stlb_write(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2,
+			     stlbe->mas3, stlbe->mas7);
 }
 
 /* XXX only map the one-one case, for now use TLB0 */
@@ -535,9 +534,8 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu)
 	gtlbe->mas3 = vcpu_e500->mas3;
 	gtlbe->mas7 = vcpu_e500->mas7;
 
-	KVMTRACE_5D(GTLB_WRITE, vcpu, vcpu_e500->mas0,
-			gtlbe->mas1, gtlbe->mas2, gtlbe->mas3, gtlbe->mas7,
-			handler);
+	trace_kvm_gtlb_write(vcpu_e500->mas0, gtlbe->mas1, gtlbe->mas2,
+			     gtlbe->mas3, gtlbe->mas7);
 
 	/* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */
 	if (tlbe_is_host_safe(vcpu, gtlbe)) {
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 28a8237fe78..7737146af3f 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -29,6 +29,7 @@
 #include <asm/kvm_ppc.h>
 #include <asm/disassemble.h>
 #include "timing.h"
+#include "trace.h"
 
 #define OP_TRAP 3
 
@@ -419,7 +420,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		}
 	}
 
-	KVMTRACE_3D(PPC_INSTR, vcpu, inst, (int)vcpu->arch.pc, emulated, entryexit);
+	trace_kvm_ppc_instr(inst, vcpu->arch.pc, emulated);
 
 	if (advance)
 		vcpu->arch.pc += 4; /* Advance past emulated instruction. */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 7ad30e0a1b9..0341391eff1 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -31,6 +31,9 @@
 #include "timing.h"
 #include "../mm/mmu_decl.h"
 
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	return gfn;
diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h
new file mode 100644
index 00000000000..67f219de045
--- /dev/null
+++ b/arch/powerpc/kvm/trace.h
@@ -0,0 +1,104 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace
+
+/*
+ * Tracepoint for guest mode entry.
+ */
+TRACE_EVENT(kvm_ppc_instr,
+	TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate),
+	TP_ARGS(inst, pc, emulate),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	inst		)
+		__field(	unsigned long,	pc		)
+		__field(	unsigned int,	emulate		)
+	),
+
+	TP_fast_assign(
+		__entry->inst		= inst;
+		__entry->pc		= pc;
+		__entry->emulate	= emulate;
+	),
+
+	TP_printk("inst %u pc 0x%lx emulate %u\n",
+		  __entry->inst, __entry->pc, __entry->emulate)
+);
+
+TRACE_EVENT(kvm_stlb_inval,
+	TP_PROTO(unsigned int stlb_index),
+	TP_ARGS(stlb_index),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	stlb_index	)
+	),
+
+	TP_fast_assign(
+		__entry->stlb_index	= stlb_index;
+	),
+
+	TP_printk("stlb_index %u", __entry->stlb_index)
+);
+
+TRACE_EVENT(kvm_stlb_write,
+	TP_PROTO(unsigned int victim, unsigned int tid, unsigned int word0,
+		 unsigned int word1, unsigned int word2),
+	TP_ARGS(victim, tid, word0, word1, word2),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	victim		)
+		__field(	unsigned int,	tid		)
+		__field(	unsigned int,	word0		)
+		__field(	unsigned int,	word1		)
+		__field(	unsigned int,	word2		)
+	),
+
+	TP_fast_assign(
+		__entry->victim		= victim;
+		__entry->tid		= tid;
+		__entry->word0		= word0;
+		__entry->word1		= word1;
+		__entry->word2		= word2;
+	),
+
+	TP_printk("victim %u tid %u w0 %u w1 %u w2 %u",
+		__entry->victim, __entry->tid, __entry->word0,
+		__entry->word1, __entry->word2)
+);
+
+TRACE_EVENT(kvm_gtlb_write,
+	TP_PROTO(unsigned int gtlb_index, unsigned int tid, unsigned int word0,
+		 unsigned int word1, unsigned int word2),
+	TP_ARGS(gtlb_index, tid, word0, word1, word2),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	gtlb_index	)
+		__field(	unsigned int,	tid		)
+		__field(	unsigned int,	word0		)
+		__field(	unsigned int,	word1		)
+		__field(	unsigned int,	word2		)
+	),
+
+	TP_fast_assign(
+		__entry->gtlb_index	= gtlb_index;
+		__entry->tid		= tid;
+		__entry->word0		= word0;
+		__entry->word1		= word1;
+		__entry->word2		= word2;
+	),
+
+	TP_printk("gtlb_index %u tid %u w0 %u w1 %u w2 %u",
+		__entry->gtlb_index, __entry->tid, __entry->word0,
+		__entry->word1, __entry->word2)
+);
+
+#endif /* _TRACE_KVM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
-- 
cgit v1.2.3


From 2023a29cbe34139afcea8f65f8aef78c325c5dc0 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 18 Jun 2009 11:47:28 -0300
Subject: KVM: remove old KVMTRACE support code

Return EOPNOTSUPP for KVM_TRACE_ENABLE/PAUSE/DISABLE ioctls.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/Kconfig     |  3 ---
 arch/powerpc/kvm/Kconfig  | 11 -----------
 arch/powerpc/kvm/Makefile |  2 --
 arch/s390/kvm/Kconfig     |  3 ---
 arch/x86/kvm/Kconfig      | 12 ------------
 arch/x86/kvm/Makefile     |  1 -
 6 files changed, 32 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index cbadd8a6523..ef3e7be29ca 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -47,9 +47,6 @@ config KVM_INTEL
 	  Provides support for KVM on Itanium 2 processors equipped with the VT
 	  extensions.
 
-config KVM_TRACE
-       bool
-
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 46019dccce1..c2992684661 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -58,17 +58,6 @@ config KVM_E500
 
 	  If unsure, say N.
 
-config KVM_TRACE
-	bool "KVM trace support"
-	depends on KVM && MARKERS && SYSFS
-	select RELAY
-	select DEBUG_FS
-	default n
-	---help---
-	  This option allows reading a trace of kvm-related events through
-	  relayfs.  Note the ABI is not considered stable and will be
-	  modified in future updates.
-
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 4f407f2662f..37655fe19f2 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -8,8 +8,6 @@ EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
 common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
-common-objs-$(CONFIG_KVM_TRACE)  += $(addprefix ../../../virt/kvm/, kvm_trace.o)
-
 CFLAGS_44x_tlb.o  := -I.
 CFLAGS_e500_tlb.o := -I.
 CFLAGS_emulate.o  := -I.
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index ad75ce33be1..bf164fc2186 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -34,9 +34,6 @@ config KVM
 
 	  If unsure, say N.
 
-config KVM_TRACE
-       bool
-
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
 source drivers/virtio/Kconfig
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 7fbedfd34d6..b84e571f417 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -62,18 +62,6 @@ config KVM_AMD
 	  To compile this as a module, choose M here: the module
 	  will be called kvm-amd.
 
-config KVM_TRACE
-	bool "KVM trace support"
-	depends on KVM && SYSFS
-	select MARKERS
-	select RELAY
-	select DEBUG_FS
-	default n
-	---help---
-	  This option allows reading a trace of kvm-related events through
-	  relayfs.  Note the ABI is not considered stable and will be
-	  modified in future updates.
-
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
 source drivers/lguest/Kconfig
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 7c56850b82c..afaaa7627d9 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -7,7 +7,6 @@ CFLAGS_vmx.o := -I.
 
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
 				coalesced_mmio.o irq_comm.o eventfd.o)
-kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
 kvm-y			+= x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
-- 
cgit v1.2.3


From 108b56690f35e083c5559116d6656f59a557a815 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 29 Jun 2009 22:24:21 +0300
Subject: KVM: switch pit creation to slots_lock

switch pit creation to slots_lock. slots_lock is already taken for read
everywhere, so we only need to take it for write when creating pit.
This is in preparation to removing in_range and kvm->lock around it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0be75d53b7f..7ce6367c197 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2188,7 +2188,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 				   sizeof(struct kvm_pit_config)))
 			goto out;
 	create_pit:
-		mutex_lock(&kvm->lock);
+		down_write(&kvm->slots_lock);
 		r = -EEXIST;
 		if (kvm->arch.vpit)
 			goto create_pit_unlock;
@@ -2197,7 +2197,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (kvm->arch.vpit)
 			r = 0;
 	create_pit_unlock:
-		mutex_unlock(&kvm->lock);
+		up_write(&kvm->slots_lock);
 		break;
 	case KVM_IRQ_LINE_STATUS:
 	case KVM_IRQ_LINE: {
-- 
cgit v1.2.3


From 6c474694530f377507f9aca438c17206e051e6e7 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 29 Jun 2009 22:24:26 +0300
Subject: KVM: convert bus to slots_lock

Use slots_lock to protect device list on the bus.  slots_lock is already
taken for read everywhere, so we only need to take it for write when
registering devices.  This is in preparation to removing in_range and
kvm->lock around it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 5 +++--
 arch/x86/kvm/i8259.c | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index bcd00c76d69..4082cdd468e 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -583,6 +583,7 @@ static const struct kvm_io_device_ops speaker_dev_ops = {
 	.in_range = speaker_in_range,
 };
 
+/* Caller must have writers lock on slots_lock */
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
@@ -621,11 +622,11 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 
 	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
-	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+	__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
 		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
-		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+		__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
 	}
 
 	return pit;
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 148c52a608d..1851aec8a7d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -548,6 +548,6 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	 * Initialize PIO device
 	 */
 	kvm_iodevice_init(&s->dev, &picdev_ops);
-	kvm_io_bus_register_dev(&kvm->pio_bus, &s->dev);
+	kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
 	return s;
 }
-- 
cgit v1.2.3


From bda9020e2463ec94db9f97e8615f3bae22069838 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 29 Jun 2009 22:24:32 +0300
Subject: KVM: remove in_range from io devices

This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.

This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c |  28 ++++--------
 arch/x86/kvm/i8254.c     |  49 +++++++++++----------
 arch/x86/kvm/i8259.c     |  20 +++++----
 arch/x86/kvm/lapic.c     |  44 +++++++++----------
 arch/x86/kvm/x86.c       | 110 ++++++++++++++---------------------------------
 5 files changed, 98 insertions(+), 153 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 5c766bd82b0..d7aa6bb8f47 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -210,16 +210,6 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 }
 
-static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-					gpa_t addr, int len, int is_write)
-{
-	struct kvm_io_device *dev;
-
-	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len, is_write);
-
-	return dev;
-}
-
 static int handle_vm_error(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
@@ -231,6 +221,7 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct kvm_mmio_req *p;
 	struct kvm_io_device *mmio_dev;
+	int r;
 
 	p = kvm_get_vcpu_ioreq(vcpu);
 
@@ -247,16 +238,13 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	kvm_run->exit_reason = KVM_EXIT_MMIO;
 	return 0;
 mmio:
-	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr, p->size, !p->dir);
-	if (mmio_dev) {
-		if (!p->dir)
-			kvm_iodevice_write(mmio_dev, p->addr, p->size,
-						&p->data);
-		else
-			kvm_iodevice_read(mmio_dev, p->addr, p->size,
-						&p->data);
-
-	} else
+	if (p->dir)
+		r = kvm_io_bus_read(&vcpu->kvm->mmio_bus, p->addr,
+				    p->size, &p->data);
+	else
+		r = kvm_io_bus_write(&vcpu->kvm->mmio_bus, p->addr,
+				     p->size, &p->data);
+	if (r)
 		printk(KERN_ERR"kvm: No iodevice found! addr:%lx\n", p->addr);
 	p->state = STATE_IORESP_READY;
 
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 4082cdd468e..8c3ac30ef9b 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -358,8 +358,14 @@ static inline struct kvm_pit *speaker_to_pit(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_pit, speaker_dev);
 }
 
-static void pit_ioport_write(struct kvm_io_device *this,
-			     gpa_t addr, int len, const void *data)
+static inline int pit_in_range(gpa_t addr)
+{
+	return ((addr >= KVM_PIT_BASE_ADDRESS) &&
+		(addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
+}
+
+static int pit_ioport_write(struct kvm_io_device *this,
+			    gpa_t addr, int len, const void *data)
 {
 	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
@@ -367,6 +373,8 @@ static void pit_ioport_write(struct kvm_io_device *this,
 	int channel, access;
 	struct kvm_kpit_channel_state *s;
 	u32 val = *(u32 *) data;
+	if (!pit_in_range(addr))
+		return -EOPNOTSUPP;
 
 	val  &= 0xff;
 	addr &= KVM_PIT_CHANNEL_MASK;
@@ -429,16 +437,19 @@ static void pit_ioport_write(struct kvm_io_device *this,
 	}
 
 	mutex_unlock(&pit_state->lock);
+	return 0;
 }
 
-static void pit_ioport_read(struct kvm_io_device *this,
-			    gpa_t addr, int len, void *data)
+static int pit_ioport_read(struct kvm_io_device *this,
+			   gpa_t addr, int len, void *data)
 {
 	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	int ret, count;
 	struct kvm_kpit_channel_state *s;
+	if (!pit_in_range(addr))
+		return -EOPNOTSUPP;
 
 	addr &= KVM_PIT_CHANNEL_MASK;
 	s = &pit_state->channels[addr];
@@ -493,37 +504,36 @@ static void pit_ioport_read(struct kvm_io_device *this,
 	memcpy(data, (char *)&ret, len);
 
 	mutex_unlock(&pit_state->lock);
+	return 0;
 }
 
-static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
-			int len, int is_write)
-{
-	return ((addr >= KVM_PIT_BASE_ADDRESS) &&
-		(addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
-}
-
-static void speaker_ioport_write(struct kvm_io_device *this,
-				 gpa_t addr, int len, const void *data)
+static int speaker_ioport_write(struct kvm_io_device *this,
+				gpa_t addr, int len, const void *data)
 {
 	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	u32 val = *(u32 *) data;
+	if (addr != KVM_SPEAKER_BASE_ADDRESS)
+		return -EOPNOTSUPP;
 
 	mutex_lock(&pit_state->lock);
 	pit_state->speaker_data_on = (val >> 1) & 1;
 	pit_set_gate(kvm, 2, val & 1);
 	mutex_unlock(&pit_state->lock);
+	return 0;
 }
 
-static void speaker_ioport_read(struct kvm_io_device *this,
-				gpa_t addr, int len, void *data)
+static int speaker_ioport_read(struct kvm_io_device *this,
+			       gpa_t addr, int len, void *data)
 {
 	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	unsigned int refresh_clock;
 	int ret;
+	if (addr != KVM_SPEAKER_BASE_ADDRESS)
+		return -EOPNOTSUPP;
 
 	/* Refresh clock toggles at about 15us. We approximate as 2^14ns. */
 	refresh_clock = ((unsigned int)ktime_to_ns(ktime_get()) >> 14) & 1;
@@ -535,12 +545,7 @@ static void speaker_ioport_read(struct kvm_io_device *this,
 		len = sizeof(ret);
 	memcpy(data, (char *)&ret, len);
 	mutex_unlock(&pit_state->lock);
-}
-
-static int speaker_in_range(struct kvm_io_device *this, gpa_t addr,
-			    int len, int is_write)
-{
-	return (addr == KVM_SPEAKER_BASE_ADDRESS);
+	return 0;
 }
 
 void kvm_pit_reset(struct kvm_pit *pit)
@@ -574,13 +579,11 @@ static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 static const struct kvm_io_device_ops pit_dev_ops = {
 	.read     = pit_ioport_read,
 	.write    = pit_ioport_write,
-	.in_range = pit_in_range,
 };
 
 static const struct kvm_io_device_ops speaker_dev_ops = {
 	.read     = speaker_ioport_read,
 	.write    = speaker_ioport_write,
-	.in_range = speaker_in_range,
 };
 
 /* Caller must have writers lock on slots_lock */
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1851aec8a7d..1d1bb75dc7b 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -430,8 +430,7 @@ static u32 elcr_ioport_read(void *opaque, u32 addr1)
 	return s->elcr;
 }
 
-static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
-			   int len, int is_write)
+static int picdev_in_range(gpa_t addr)
 {
 	switch (addr) {
 	case 0x20:
@@ -451,16 +450,18 @@ static inline struct kvm_pic *to_pic(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_pic, dev);
 }
 
-static void picdev_write(struct kvm_io_device *this,
+static int picdev_write(struct kvm_io_device *this,
 			 gpa_t addr, int len, const void *val)
 {
 	struct kvm_pic *s = to_pic(this);
 	unsigned char data = *(unsigned char *)val;
+	if (!picdev_in_range(addr))
+		return -EOPNOTSUPP;
 
 	if (len != 1) {
 		if (printk_ratelimit())
 			printk(KERN_ERR "PIC: non byte write\n");
-		return;
+		return 0;
 	}
 	pic_lock(s);
 	switch (addr) {
@@ -476,18 +477,21 @@ static void picdev_write(struct kvm_io_device *this,
 		break;
 	}
 	pic_unlock(s);
+	return 0;
 }
 
-static void picdev_read(struct kvm_io_device *this,
-			gpa_t addr, int len, void *val)
+static int picdev_read(struct kvm_io_device *this,
+		       gpa_t addr, int len, void *val)
 {
 	struct kvm_pic *s = to_pic(this);
 	unsigned char data = 0;
+	if (!picdev_in_range(addr))
+		return -EOPNOTSUPP;
 
 	if (len != 1) {
 		if (printk_ratelimit())
 			printk(KERN_ERR "PIC: non byte read\n");
-		return;
+		return 0;
 	}
 	pic_lock(s);
 	switch (addr) {
@@ -504,6 +508,7 @@ static void picdev_read(struct kvm_io_device *this,
 	}
 	*(unsigned char *)val = data;
 	pic_unlock(s);
+	return 0;
 }
 
 /*
@@ -526,7 +531,6 @@ static void pic_irq_request(void *opaque, int level)
 static const struct kvm_io_device_ops picdev_ops = {
 	.read     = picdev_read,
 	.write    = picdev_write,
-	.in_range = picdev_in_range,
 };
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 2e028659638..265a765f038 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -546,18 +546,27 @@ static inline struct kvm_lapic *to_lapic(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_lapic, dev);
 }
 
-static void apic_mmio_read(struct kvm_io_device *this,
-			   gpa_t address, int len, void *data)
+static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
+{
+	return apic_hw_enabled(apic) &&
+	    addr >= apic->base_address &&
+	    addr < apic->base_address + LAPIC_MMIO_LENGTH;
+}
+
+static int apic_mmio_read(struct kvm_io_device *this,
+			  gpa_t address, int len, void *data)
 {
 	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 result;
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
 
 	if ((alignment + len) > 4) {
 		printk(KERN_ERR "KVM_APIC_READ: alignment error %lx %d",
 		       (unsigned long)address, len);
-		return;
+		return 0;
 	}
 	result = __apic_read(apic, offset & ~0xf);
 
@@ -574,6 +583,7 @@ static void apic_mmio_read(struct kvm_io_device *this,
 		       "should be 1,2, or 4 instead\n", len);
 		break;
 	}
+	return 0;
 }
 
 static void update_divide_count(struct kvm_lapic *apic)
@@ -629,13 +639,15 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 		apic->vcpu->kvm->arch.vapics_in_nmi_mode--;
 }
 
-static void apic_mmio_write(struct kvm_io_device *this,
-			    gpa_t address, int len, const void *data)
+static int apic_mmio_write(struct kvm_io_device *this,
+			   gpa_t address, int len, const void *data)
 {
 	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 val;
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
 
 	/*
 	 * APIC register must be aligned on 128-bits boundary.
@@ -646,7 +658,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 		/* Don't shout loud, $infamous_os would cause only noise. */
 		apic_debug("apic write: bad size=%d %lx\n",
 			   len, (long)address);
-		return;
+		return 0;
 	}
 
 	val = *(u32 *) data;
@@ -729,7 +741,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 		hrtimer_cancel(&apic->lapic_timer.timer);
 		apic_set_reg(apic, APIC_TMICT, val);
 		start_apic_timer(apic);
-		return;
+		return 0;
 
 	case APIC_TDCR:
 		if (val & 4)
@@ -743,22 +755,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 			   offset);
 		break;
 	}
-
-}
-
-static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
-			   int len, int size)
-{
-	struct kvm_lapic *apic = to_lapic(this);
-	int ret = 0;
-
-
-	if (apic_hw_enabled(apic) &&
-	    (addr >= apic->base_address) &&
-	    (addr < (apic->base_address + LAPIC_MMIO_LENGTH)))
-		ret = 1;
-
-	return ret;
+	return 0;
 }
 
 void kvm_free_lapic(struct kvm_vcpu *vcpu)
@@ -938,7 +935,6 @@ static struct kvm_timer_ops lapic_timer_ops = {
 static const struct kvm_io_device_ops apic_mmio_ops = {
 	.read     = apic_mmio_read,
 	.write    = apic_mmio_write,
-	.in_range = apic_mmio_range,
 };
 
 int kvm_create_lapic(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7ce6367c197..96f0ae7d97b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2333,35 +2333,23 @@ static void kvm_init_msr_list(void)
 	num_msrs_to_save = j;
 }
 
-/*
- * Only apic need an MMIO device hook, so shortcut now..
- */
-static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr, int len,
-						int is_write)
+static int vcpu_mmio_write(struct kvm_vcpu *vcpu, gpa_t addr, int len,
+			   const void *v)
 {
-	struct kvm_io_device *dev;
+	if (vcpu->arch.apic &&
+	    !kvm_iodevice_write(&vcpu->arch.apic->dev, addr, len, v))
+		return 0;
 
-	if (vcpu->arch.apic) {
-		dev = &vcpu->arch.apic->dev;
-		if (kvm_iodevice_in_range(dev, addr, len, is_write))
-			return dev;
-	}
-	return NULL;
+	return kvm_io_bus_write(&vcpu->kvm->mmio_bus, addr, len, v);
 }
 
-
-static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr, int len,
-						int is_write)
+static int vcpu_mmio_read(struct kvm_vcpu *vcpu, gpa_t addr, int len, void *v)
 {
-	struct kvm_io_device *dev;
+	if (vcpu->arch.apic &&
+	    !kvm_iodevice_read(&vcpu->arch.apic->dev, addr, len, v))
+		return 0;
 
-	dev = vcpu_find_pervcpu_dev(vcpu, addr, len, is_write);
-	if (dev == NULL)
-		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len,
-					  is_write);
-	return dev;
+	return kvm_io_bus_read(&vcpu->kvm->mmio_bus, addr, len, v);
 }
 
 static int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
@@ -2430,7 +2418,6 @@ static int emulator_read_emulated(unsigned long addr,
 				  unsigned int bytes,
 				  struct kvm_vcpu *vcpu)
 {
-	struct kvm_io_device *mmio_dev;
 	gpa_t                 gpa;
 
 	if (vcpu->mmio_read_completed) {
@@ -2455,13 +2442,8 @@ mmio:
 	/*
 	 * Is this MMIO handled locally?
 	 */
-	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
-	mutex_unlock(&vcpu->kvm->lock);
-	if (mmio_dev) {
-		kvm_iodevice_read(mmio_dev, gpa, bytes, val);
+	if (!vcpu_mmio_read(vcpu, gpa, bytes, val))
 		return X86EMUL_CONTINUE;
-	}
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2488,7 +2470,6 @@ static int emulator_write_emulated_onepage(unsigned long addr,
 					   unsigned int bytes,
 					   struct kvm_vcpu *vcpu)
 {
-	struct kvm_io_device *mmio_dev;
 	gpa_t                 gpa;
 
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
@@ -2509,13 +2490,8 @@ mmio:
 	/*
 	 * Is this MMIO handled locally?
 	 */
-	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
-	mutex_unlock(&vcpu->kvm->lock);
-	if (mmio_dev) {
-		kvm_iodevice_write(mmio_dev, gpa, bytes, val);
+	if (!vcpu_mmio_write(vcpu, gpa, bytes, val))
 		return X86EMUL_CONTINUE;
-	}
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2850,48 +2826,40 @@ int complete_pio(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
-static void kernel_pio(struct kvm_io_device *pio_dev,
-		       struct kvm_vcpu *vcpu,
-		       void *pd)
+static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
 {
 	/* TODO: String I/O for in kernel device */
+	int r;
 
 	if (vcpu->arch.pio.in)
-		kvm_iodevice_read(pio_dev, vcpu->arch.pio.port,
-				  vcpu->arch.pio.size,
-				  pd);
+		r = kvm_io_bus_read(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
+				    vcpu->arch.pio.size, pd);
 	else
-		kvm_iodevice_write(pio_dev, vcpu->arch.pio.port,
-				   vcpu->arch.pio.size,
-				   pd);
+		r = kvm_io_bus_write(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
+				     vcpu->arch.pio.size, pd);
+	return r;
 }
 
-static void pio_string_write(struct kvm_io_device *pio_dev,
-			     struct kvm_vcpu *vcpu)
+static int pio_string_write(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pio_request *io = &vcpu->arch.pio;
 	void *pd = vcpu->arch.pio_data;
-	int i;
+	int i, r = 0;
 
 	for (i = 0; i < io->cur_count; i++) {
-		kvm_iodevice_write(pio_dev, io->port,
-				   io->size,
-				   pd);
+		if (kvm_io_bus_write(&vcpu->kvm->pio_bus,
+				     io->port, io->size, pd)) {
+			r = -EOPNOTSUPP;
+			break;
+		}
 		pd += io->size;
 	}
-}
-
-static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
-					       gpa_t addr, int len,
-					       int is_write)
-{
-	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr, len, is_write);
+	return r;
 }
 
 int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		  int size, unsigned port)
 {
-	struct kvm_io_device *pio_dev;
 	unsigned long val;
 
 	vcpu->run->exit_reason = KVM_EXIT_IO;
@@ -2911,11 +2879,7 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	memcpy(vcpu->arch.pio_data, &val, 4);
 
-	mutex_lock(&vcpu->kvm->lock);
-	pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
-	mutex_unlock(&vcpu->kvm->lock);
-	if (pio_dev) {
-		kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
+	if (!kernel_pio(vcpu, vcpu->arch.pio_data)) {
 		complete_pio(vcpu);
 		return 1;
 	}
@@ -2929,7 +2893,6 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 {
 	unsigned now, in_page;
 	int ret = 0;
-	struct kvm_io_device *pio_dev;
 
 	vcpu->run->exit_reason = KVM_EXIT_IO;
 	vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT;
@@ -2973,12 +2936,6 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
 	vcpu->arch.pio.guest_gva = address;
 
-	mutex_lock(&vcpu->kvm->lock);
-	pio_dev = vcpu_find_pio_dev(vcpu, port,
-				    vcpu->arch.pio.cur_count,
-				    !vcpu->arch.pio.in);
-	mutex_unlock(&vcpu->kvm->lock);
-
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
@@ -2986,16 +2943,13 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 			kvm_inject_gp(vcpu, 0);
 			return 1;
 		}
-		if (ret == 0 && pio_dev) {
-			pio_string_write(pio_dev, vcpu);
+		if (ret == 0 && !pio_string_write(vcpu)) {
 			complete_pio(vcpu);
 			if (vcpu->arch.pio.count == 0)
 				ret = 1;
 		}
-	} else if (pio_dev)
-		pr_unimpl(vcpu, "no string pio read support yet, "
-		       "port %x size %d count %ld\n",
-			port, size, count);
+	}
+	/* no string PIO read support yet */
 
 	return ret;
 }
-- 
cgit v1.2.3


From c323c0e5f06150cc000e09e8e3b22356099e7bde Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 24 Jun 2009 15:37:05 +0200
Subject: KVM: Ignore PCI ECS I/O enablement

Linux guests will try to enable access to the extended PCI config space
via the I/O ports 0xCF8/0xCFC on AMD Fam10h CPU. Since we (currently?)
don't use ECS, simply ignore write and read attempts.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 96f0ae7d97b..af40e23df25 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -844,6 +844,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			return 1;
 		}
 		break;
+	case MSR_AMD64_NB_CFG:
+		break;
 	case MSR_IA32_DEBUGCTLMSR:
 		if (!data) {
 			/* We support the non-activated case already */
@@ -1049,6 +1051,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_P6_EVNTSEL1:
 	case MSR_K7_EVNTSEL0:
 	case MSR_K8_INT_PENDING_MSG:
+	case MSR_AMD64_NB_CFG:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From aec51dc4f1584018d7e35269e04e3dde3d2033e6 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 1 Jul 2009 16:01:02 +0300
Subject: KVM: Trace mmio

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index af40e23df25..d32e3c6d317 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -37,6 +37,8 @@
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>
 #include <linux/cpufreq.h>
+#include <trace/events/kvm.h>
+#undef TRACE_INCLUDE_FILE
 #define CREATE_TRACE_POINTS
 #include "trace.h"
 
@@ -2425,6 +2427,8 @@ static int emulator_read_emulated(unsigned long addr,
 
 	if (vcpu->mmio_read_completed) {
 		memcpy(val, vcpu->mmio_data, bytes);
+		trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes,
+			       vcpu->mmio_phys_addr, *(u64 *)val);
 		vcpu->mmio_read_completed = 0;
 		return X86EMUL_CONTINUE;
 	}
@@ -2445,8 +2449,12 @@ mmio:
 	/*
 	 * Is this MMIO handled locally?
 	 */
-	if (!vcpu_mmio_read(vcpu, gpa, bytes, val))
+	if (!vcpu_mmio_read(vcpu, gpa, bytes, val)) {
+		trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes, gpa, *(u64 *)val);
 		return X86EMUL_CONTINUE;
+	}
+
+	trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, bytes, gpa, 0);
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2490,6 +2498,7 @@ static int emulator_write_emulated_onepage(unsigned long addr,
 		return X86EMUL_CONTINUE;
 
 mmio:
+	trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, bytes, gpa, *(u64 *)val);
 	/*
 	 * Is this MMIO handled locally?
 	 */
-- 
cgit v1.2.3


From cb24772140e09cb2503af7a4736ae3e08e9ac7d3 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 1 Jul 2009 18:25:44 +0300
Subject: KVM: Trace apic registers using their symbolic names

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/trace.h | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index cd8c90db41a..6c2c87fa6e4 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -111,6 +111,15 @@ TRACE_EVENT(kvm_cpuid,
 		  __entry->rbx, __entry->rcx, __entry->rdx)
 );
 
+#define AREG(x) { APIC_##x, "APIC_" #x }
+
+#define kvm_trace_symbol_apic						    \
+	AREG(ID), AREG(LVR), AREG(TASKPRI), AREG(ARBPRI), AREG(PROCPRI),    \
+	AREG(EOI), AREG(RRR), AREG(LDR), AREG(DFR), AREG(SPIV), AREG(ISR),  \
+	AREG(TMR), AREG(IRR), AREG(ESR), AREG(ICR), AREG(ICR2), AREG(LVTT), \
+	AREG(LVTTHMR), AREG(LVTPC), AREG(LVT0), AREG(LVT1), AREG(LVTERR),   \
+	AREG(TMICT), AREG(TMCCT), AREG(TDCR), AREG(SELF_IPI), AREG(EFEAT),  \
+	AREG(ECTRL)
 /*
  * Tracepoint for apic access.
  */
@@ -130,9 +139,10 @@ TRACE_EVENT(kvm_apic,
 		__entry->val		= val;
 	),
 
-	TP_printk("apic_%s 0x%x = 0x%x",
+	TP_printk("apic_%s %s = 0x%x",
 		  __entry->rw ? "write" : "read",
-		  __entry->reg, __entry->val)
+		  __print_symbolic(__entry->reg, kvm_trace_symbol_apic),
+		  __entry->val)
 );
 
 #define trace_kvm_apic_read(reg, val)		trace_kvm_apic(0, reg, val)
-- 
cgit v1.2.3


From fc61b800f9506ca47bf1439342a79847f2353562 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 5 Jul 2009 17:39:35 +0300
Subject: KVM: Add Directed EOI support to APIC emulation

Directed EOI is specified by x2APIC, but is available even when lapic is
in xAPIC mode.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/apicdef.h |  2 ++
 arch/x86/kvm/lapic.c           | 38 ++++++++++++++++++++++++++++++--------
 arch/x86/kvm/lapic.h           |  1 +
 arch/x86/kvm/x86.c             |  4 ++--
 arch/x86/kvm/x86.h             |  4 ++++
 5 files changed, 39 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 7ddb36ab933..74ca38f6a4d 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -14,6 +14,7 @@
 
 #define	APIC_LVR	0x30
 #define		APIC_LVR_MASK		0xFF00FF
+#define		APIC_LVR_DIRECTED_EOI	(1 << 24)
 #define		GET_APIC_VERSION(x)	((x) & 0xFFu)
 #define		GET_APIC_MAXLVT(x)	(((x) >> 16) & 0xFFu)
 #ifdef CONFIG_X86_32
@@ -40,6 +41,7 @@
 #define		APIC_DFR_CLUSTER		0x0FFFFFFFul
 #define		APIC_DFR_FLAT			0xFFFFFFFFul
 #define	APIC_SPIV	0xF0
+#define		APIC_SPIV_DIRECTED_EOI		(1 << 12)
 #define		APIC_SPIV_FOCUS_DISABLED	(1 << 9)
 #define		APIC_SPIV_APIC_ENABLED		(1 << 8)
 #define	APIC_ISR	0x100
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 265a765f038..62ea2abfd96 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -35,6 +35,7 @@
 #include "kvm_cache_regs.h"
 #include "irq.h"
 #include "trace.h"
+#include "x86.h"
 
 #ifndef CONFIG_X86_64
 #define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -142,6 +143,21 @@ static inline int apic_lvt_nmi_mode(u32 lvt_val)
 	return (lvt_val & (APIC_MODE_MASK | APIC_LVT_MASKED)) == APIC_DM_NMI;
 }
 
+void kvm_apic_set_version(struct kvm_vcpu *vcpu)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+	struct kvm_cpuid_entry2 *feat;
+	u32 v = APIC_VERSION;
+
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return;
+
+	feat = kvm_find_cpuid_entry(apic->vcpu, 0x1, 0);
+	if (feat && (feat->ecx & (1 << (X86_FEATURE_X2APIC & 31))))
+		v |= APIC_LVR_DIRECTED_EOI;
+	apic_set_reg(apic, APIC_LVR, v);
+}
+
 static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
 	LVT_MASK | APIC_LVT_TIMER_PERIODIC,	/* LVTT */
 	LVT_MASK | APIC_MODE_MASK,	/* LVTTHMR */
@@ -442,9 +458,11 @@ static void apic_set_eoi(struct kvm_lapic *apic)
 		trigger_mode = IOAPIC_LEVEL_TRIG;
 	else
 		trigger_mode = IOAPIC_EDGE_TRIG;
-	mutex_lock(&apic->vcpu->kvm->irq_lock);
-	kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
-	mutex_unlock(&apic->vcpu->kvm->irq_lock);
+	if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI)) {
+		mutex_lock(&apic->vcpu->kvm->irq_lock);
+		kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
+		mutex_unlock(&apic->vcpu->kvm->irq_lock);
+	}
 }
 
 static void apic_send_ipi(struct kvm_lapic *apic)
@@ -694,8 +712,11 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
 		break;
 
-	case APIC_SPIV:
-		apic_set_reg(apic, APIC_SPIV, val & 0x3ff);
+	case APIC_SPIV: {
+		u32 mask = 0x3ff;
+		if (apic_get_reg(apic, APIC_LVR) & APIC_LVR_DIRECTED_EOI)
+			mask |= APIC_SPIV_DIRECTED_EOI;
+		apic_set_reg(apic, APIC_SPIV, val & mask);
 		if (!(val & APIC_SPIV_APIC_ENABLED)) {
 			int i;
 			u32 lvt_val;
@@ -710,7 +731,7 @@ static int apic_mmio_write(struct kvm_io_device *this,
 
 		}
 		break;
-
+	}
 	case APIC_ICR:
 		/* No delay here, so we always clear the pending bit */
 		apic_set_reg(apic, APIC_ICR, val & ~(1 << 12));
@@ -837,7 +858,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 	hrtimer_cancel(&apic->lapic_timer.timer);
 
 	apic_set_reg(apic, APIC_ID, vcpu->vcpu_id << 24);
-	apic_set_reg(apic, APIC_LVR, APIC_VERSION);
+	kvm_apic_set_version(apic->vcpu);
 
 	for (i = 0; i < APIC_LVT_NUM; i++)
 		apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
@@ -1041,7 +1062,8 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu)
 
 	apic->base_address = vcpu->arch.apic_base &
 			     MSR_IA32_APICBASE_BASE;
-	apic_set_reg(apic, APIC_LVR, APIC_VERSION);
+	kvm_apic_set_version(vcpu);
+
 	apic_update_ppr(apic);
 	hrtimer_cancel(&apic->lapic_timer.timer);
 	update_divide_count(apic);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 3f3ecc6edbf..bc1c5243c86 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -29,6 +29,7 @@ u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
 u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
+void kvm_apic_set_version(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d32e3c6d317..086f93137e3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -79,8 +79,6 @@ static u64 __read_mostly efer_reserved_bits = 0xfffffffffffffffeULL;
 
 static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				    struct kvm_cpuid_entry2 __user *entries);
-struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
-					      u32 function, u32 index);
 
 struct kvm_x86_ops *kvm_x86_ops;
 EXPORT_SYMBOL_GPL(kvm_x86_ops);
@@ -1373,6 +1371,7 @@ static int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 	vcpu->arch.cpuid_nent = cpuid->nent;
 	cpuid_fix_nx_cap(vcpu);
 	r = 0;
+	kvm_apic_set_version(vcpu);
 
 out_free:
 	vfree(cpuid_entries);
@@ -1394,6 +1393,7 @@ static int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
 			   cpuid->nent * sizeof(struct kvm_cpuid_entry2)))
 		goto out;
 	vcpu->arch.cpuid_nent = cpuid->nent;
+	kvm_apic_set_version(vcpu);
 	return 0;
 
 out:
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 4c8e10af78e..5eadea585d2 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -31,4 +31,8 @@ static inline bool kvm_exception_is_soft(unsigned int nr)
 {
 	return (nr == BP_VECTOR) || (nr == OF_VECTOR);
 }
+
+struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
+                                             u32 function, u32 index);
+
 #endif
-- 
cgit v1.2.3


From 0105d1a526404cfc9779552a6198bfd0e5fc937a Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 5 Jul 2009 17:39:36 +0300
Subject: KVM: x2apic interface to lapic

This patch implements MSR interface to local apic as defines by x2apic
Intel specification.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 223 +++++++++++++++++++++++++++++++++++++--------------
 arch/x86/kvm/lapic.h |   2 +
 arch/x86/kvm/x86.c   |   7 +-
 3 files changed, 173 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 62ea2abfd96..683345a121b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -32,6 +32,7 @@
 #include <asm/current.h>
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
+#include <asm/apicdef.h>
 #include "kvm_cache_regs.h"
 #include "irq.h"
 #include "trace.h"
@@ -158,6 +159,11 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu)
 	apic_set_reg(apic, APIC_LVR, v);
 }
 
+static inline int apic_x2apic_mode(struct kvm_lapic *apic)
+{
+	return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
+}
+
 static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
 	LVT_MASK | APIC_LVT_TIMER_PERIODIC,	/* LVTT */
 	LVT_MASK | APIC_MODE_MASK,	/* LVTTHMR */
@@ -284,7 +290,12 @@ int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest)
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
 {
 	int result = 0;
-	u8 logical_id;
+	u32 logical_id;
+
+	if (apic_x2apic_mode(apic)) {
+		logical_id = apic_get_reg(apic, APIC_LDR);
+		return logical_id & mda;
+	}
 
 	logical_id = GET_APIC_LOGICAL_ID(apic_get_reg(apic, APIC_LDR));
 
@@ -477,7 +488,10 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 	irq.level = icr_low & APIC_INT_ASSERT;
 	irq.trig_mode = icr_low & APIC_INT_LEVELTRIG;
 	irq.shorthand = icr_low & APIC_SHORT_MASK;
-	irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
+	if (apic_x2apic_mode(apic))
+		irq.dest_id = icr_high;
+	else
+		irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
 
 	apic_debug("icr_high 0x%x, icr_low 0x%x, "
 		   "short_hand 0x%x, dest 0x%x, trig_mode 0x%x, level 0x%x, "
@@ -538,6 +552,12 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 		return 0;
 
 	switch (offset) {
+	case APIC_ID:
+		if (apic_x2apic_mode(apic))
+			val = kvm_apic_id(apic);
+		else
+			val = kvm_apic_id(apic) << 24;
+		break;
 	case APIC_ARBPRI:
 		printk(KERN_WARNING "Access APIC ARBPRI register "
 		       "which is for P6\n");
@@ -564,28 +584,26 @@ static inline struct kvm_lapic *to_lapic(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_lapic, dev);
 }
 
-static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
-{
-	return apic_hw_enabled(apic) &&
-	    addr >= apic->base_address &&
-	    addr < apic->base_address + LAPIC_MMIO_LENGTH;
-}
-
-static int apic_mmio_read(struct kvm_io_device *this,
-			  gpa_t address, int len, void *data)
+static int apic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
+		void *data)
 {
-	struct kvm_lapic *apic = to_lapic(this);
-	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 result;
-	if (!apic_mmio_in_range(apic, address))
-		return -EOPNOTSUPP;
+	/* this bitmask has a bit cleared for each reserver register */
+	static const u64 rmask = 0x43ff01ffffffe70cULL;
 
 	if ((alignment + len) > 4) {
-		printk(KERN_ERR "KVM_APIC_READ: alignment error %lx %d",
-		       (unsigned long)address, len);
-		return 0;
+		printk(KERN_ERR "KVM_APIC_READ: alignment error %x %d\n",
+				offset, len);
+		return 1;
 	}
+
+	if (offset > 0x3f0 || !(rmask & (1ULL << (offset >> 4)))) {
+		printk(KERN_ERR "KVM_APIC_READ: read reserved register %x\n",
+				offset);
+		return 1;
+	}
+
 	result = __apic_read(apic, offset & ~0xf);
 
 	trace_kvm_apic_read(offset, result);
@@ -604,6 +622,27 @@ static int apic_mmio_read(struct kvm_io_device *this,
 	return 0;
 }
 
+static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
+{
+	return apic_hw_enabled(apic) &&
+	    addr >= apic->base_address &&
+	    addr < apic->base_address + LAPIC_MMIO_LENGTH;
+}
+
+static int apic_mmio_read(struct kvm_io_device *this,
+			   gpa_t address, int len, void *data)
+{
+	struct kvm_lapic *apic = to_lapic(this);
+	u32 offset = address - apic->base_address;
+
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
+
+	apic_reg_read(apic, offset, len, data);
+
+	return 0;
+}
+
 static void update_divide_count(struct kvm_lapic *apic)
 {
 	u32 tmp1, tmp2, tdcr;
@@ -657,42 +696,18 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 		apic->vcpu->kvm->arch.vapics_in_nmi_mode--;
 }
 
-static int apic_mmio_write(struct kvm_io_device *this,
-			   gpa_t address, int len, const void *data)
+static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 {
-	struct kvm_lapic *apic = to_lapic(this);
-	unsigned int offset = address - apic->base_address;
-	unsigned char alignment = offset & 0xf;
-	u32 val;
-	if (!apic_mmio_in_range(apic, address))
-		return -EOPNOTSUPP;
-
-	/*
-	 * APIC register must be aligned on 128-bits boundary.
-	 * 32/64/128 bits registers must be accessed thru 32 bits.
-	 * Refer SDM 8.4.1
-	 */
-	if (len != 4 || alignment) {
-		/* Don't shout loud, $infamous_os would cause only noise. */
-		apic_debug("apic write: bad size=%d %lx\n",
-			   len, (long)address);
-		return 0;
-	}
-
-	val = *(u32 *) data;
+	int ret = 0;
 
-	/* too common printing */
-	if (offset != APIC_EOI)
-		apic_debug("%s: offset 0x%x with length 0x%x, and value is "
-			   "0x%x\n", __func__, offset, len, val);
+	trace_kvm_apic_write(reg, val);
 
-	offset &= 0xff0;
-
-	trace_kvm_apic_write(offset, val);
-
-	switch (offset) {
+	switch (reg) {
 	case APIC_ID:		/* Local APIC ID */
-		apic_set_reg(apic, APIC_ID, val);
+		if (!apic_x2apic_mode(apic))
+			apic_set_reg(apic, APIC_ID, val);
+		else
+			ret = 1;
 		break;
 
 	case APIC_TASKPRI:
@@ -705,11 +720,17 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		break;
 
 	case APIC_LDR:
-		apic_set_reg(apic, APIC_LDR, val & APIC_LDR_MASK);
+		if (!apic_x2apic_mode(apic))
+			apic_set_reg(apic, APIC_LDR, val & APIC_LDR_MASK);
+		else
+			ret = 1;
 		break;
 
 	case APIC_DFR:
-		apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
+		if (!apic_x2apic_mode(apic))
+			apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
+		else
+			ret = 1;
 		break;
 
 	case APIC_SPIV: {
@@ -739,7 +760,9 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		break;
 
 	case APIC_ICR2:
-		apic_set_reg(apic, APIC_ICR2, val & 0xff000000);
+		if (!apic_x2apic_mode(apic))
+			val &= 0xff000000;
+		apic_set_reg(apic, APIC_ICR2, val);
 		break;
 
 	case APIC_LVT0:
@@ -753,8 +776,8 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		if (!apic_sw_enabled(apic))
 			val |= APIC_LVT_MASKED;
 
-		val &= apic_lvt_mask[(offset - APIC_LVTT) >> 4];
-		apic_set_reg(apic, offset, val);
+		val &= apic_lvt_mask[(reg - APIC_LVTT) >> 4];
+		apic_set_reg(apic, reg, val);
 
 		break;
 
@@ -762,7 +785,7 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		hrtimer_cancel(&apic->lapic_timer.timer);
 		apic_set_reg(apic, APIC_TMICT, val);
 		start_apic_timer(apic);
-		return 0;
+		break;
 
 	case APIC_TDCR:
 		if (val & 4)
@@ -771,11 +794,58 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		update_divide_count(apic);
 		break;
 
+	case APIC_ESR:
+		if (apic_x2apic_mode(apic) && val != 0) {
+			printk(KERN_ERR "KVM_WRITE:ESR not zero %x\n", val);
+			ret = 1;
+		}
+		break;
+
+	case APIC_SELF_IPI:
+		if (apic_x2apic_mode(apic)) {
+			apic_reg_write(apic, APIC_ICR, 0x40000 | (val & 0xff));
+		} else
+			ret = 1;
+		break;
 	default:
-		apic_debug("Local APIC Write to read-only register %x\n",
-			   offset);
+		ret = 1;
 		break;
 	}
+	if (ret)
+		apic_debug("Local APIC Write to read-only register %x\n", reg);
+	return ret;
+}
+
+static int apic_mmio_write(struct kvm_io_device *this,
+			    gpa_t address, int len, const void *data)
+{
+	struct kvm_lapic *apic = to_lapic(this);
+	unsigned int offset = address - apic->base_address;
+	u32 val;
+
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
+
+	/*
+	 * APIC register must be aligned on 128-bits boundary.
+	 * 32/64/128 bits registers must be accessed thru 32 bits.
+	 * Refer SDM 8.4.1
+	 */
+	if (len != 4 || (offset & 0xf)) {
+		/* Don't shout loud, $infamous_os would cause only noise. */
+		apic_debug("apic write: bad size=%d %lx\n", len, (long)address);
+		return;
+	}
+
+	val = *(u32*)data;
+
+	/* too common printing */
+	if (offset != APIC_EOI)
+		apic_debug("%s: offset 0x%x with length 0x%x, and value is "
+			   "0x%x\n", __func__, offset, len, val);
+
+	apic_reg_write(apic, offset & 0xff0, val);
+
 	return 0;
 }
 
@@ -834,6 +904,11 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 		value &= ~MSR_IA32_APICBASE_BSP;
 
 	vcpu->arch.apic_base = value;
+	if (apic_x2apic_mode(apic)) {
+		u32 id = kvm_apic_id(apic);
+		u32 ldr = ((id & ~0xf) << 16) | (1 << (id & 0xf));
+		apic_set_reg(apic, APIC_LDR, ldr);
+	}
 	apic->base_address = apic->vcpu->arch.apic_base &
 			     MSR_IA32_APICBASE_BASE;
 
@@ -1130,3 +1205,35 @@ void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr)
 
 	vcpu->arch.apic->vapic_addr = vapic_addr;
 }
+
+int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+	u32 reg = (msr - APIC_BASE_MSR) << 4;
+
+	if (!irqchip_in_kernel(vcpu->kvm) || !apic_x2apic_mode(apic))
+		return 1;
+
+	/* if this is ICR write vector before command */
+	if (msr == 0x830)
+		apic_reg_write(apic, APIC_ICR2, (u32)(data >> 32));
+	return apic_reg_write(apic, reg, (u32)data);
+}
+
+int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+	u32 reg = (msr - APIC_BASE_MSR) << 4, low, high = 0;
+
+	if (!irqchip_in_kernel(vcpu->kvm) || !apic_x2apic_mode(apic))
+		return 1;
+
+	if (apic_reg_read(apic, reg, 4, &low))
+		return 1;
+	if (msr == 0x830)
+		apic_reg_read(apic, APIC_ICR2, 4, &high);
+
+	*data = (((u64)high) << 32) | low;
+
+	return 0;
+}
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index bc1c5243c86..40010b09c4a 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -46,4 +46,6 @@ void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
 void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
 void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
 
+int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
+int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
 #endif
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 086f93137e3..a50c83232e7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -867,6 +867,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_IA32_APICBASE:
 		kvm_set_apic_base(vcpu, data);
 		break;
+	case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+		return kvm_x2apic_msr_write(vcpu, msr, data);
 	case MSR_IA32_MISC_ENABLE:
 		vcpu->arch.ia32_misc_enable_msr = data;
 		break;
@@ -1065,6 +1067,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_APICBASE:
 		data = kvm_get_apic_base(vcpu);
 		break;
+	case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+		return kvm_x2apic_msr_read(vcpu, msr, pdata);
+		break;
 	case MSR_IA32_MISC_ENABLE:
 		data = vcpu->arch.ia32_misc_enable_msr;
 		break;
@@ -1469,7 +1474,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
 		0 /* Reserved */ | F(CX16) | 0 /* xTPR Update, PDCM */ |
 		0 /* Reserved, DCA */ | F(XMM4_1) |
-		F(XMM4_2) | 0 /* x2APIC */ | F(MOVBE) | F(POPCNT) |
+		F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) |
 		0 /* Reserved, XSAVE, OSXSAVE */;
 	/* cpuid 0x80000001.ecx */
 	const u32 kvm_supported_word6_x86_features =
-- 
cgit v1.2.3


From 756975bbfd185169aac19f227d65a8d738a5f5f8 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Mon, 6 Jul 2009 11:05:39 +0800
Subject: KVM: Fix apic_mmio_write return for unaligned write

Some in-famous OS do unaligned writing for APIC MMIO, and the return value
has been missed in recent change, then the OS hangs.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 683345a121b..6c846030854 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -834,7 +834,7 @@ static int apic_mmio_write(struct kvm_io_device *this,
 	if (len != 4 || (offset & 0xf)) {
 		/* Don't shout loud, $infamous_os would cause only noise. */
 		apic_debug("apic write: bad size=%d %lx\n", len, (long)address);
-		return;
+		return 0;
 	}
 
 	val = *(u32*)data;
-- 
cgit v1.2.3


From 6098ca939ee5ceb81d6628b9130112516bae7400 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Fri, 3 Jul 2009 16:00:14 +0200
Subject: KVM: handle AMD microcode MSR

Windows 7 tries to update the CPU's microcode on some processors,
so we ignore the MSR write here. The patchlevel register is already handled
(returning 0), because the MSR number is the same as Intel's.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a50c83232e7..6dde99ca743 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -861,6 +861,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
 	case MSR_VM_HSAVE_PA:
+	case MSR_AMD64_PATCH_LOADER:
 		break;
 	case 0x200 ... 0x2ff:
 		return set_msr_mtrr(vcpu, msr, data);
-- 
cgit v1.2.3


From dc7e795e3dd2a763e5ceaa1615f307e808cf3932 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Wed, 1 Jul 2009 20:52:03 +0200
Subject: Revert "KVM: x86: check for cr3 validity in ioctl_set_sregs"

This reverts commit 6c20e1442bb1c62914bb85b7f4a38973d2a423ba.

To my understanding, it became obsolete with the advent of the more
robust check in mmu_alloc_roots (89da4ff17f). Moreover, it prevents
the conceptually safe pattern

 1. set sregs
 2. register mem-slots
 3. run vcpu

by setting a sticky triple fault during step 1.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6dde99ca743..0e74d98641a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4326,13 +4326,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	vcpu->arch.cr2 = sregs->cr2;
 	mmu_reset_needed |= vcpu->arch.cr3 != sregs->cr3;
-
-	down_read(&vcpu->kvm->slots_lock);
-	if (gfn_to_memslot(vcpu->kvm, sregs->cr3 >> PAGE_SHIFT))
-		vcpu->arch.cr3 = sregs->cr3;
-	else
-		set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
-	up_read(&vcpu->kvm->slots_lock);
+	vcpu->arch.cr3 = sregs->cr3;
 
 	kvm_set_cr8(vcpu, sregs->cr8);
 
-- 
cgit v1.2.3


From 07420171593908406c3a59d6f884d426a921a5ea Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 6 Jul 2009 12:21:32 +0300
Subject: KVM: MMU: Trace guest pagetable walker

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         |   3 ++
 arch/x86/kvm/mmutrace.h    | 117 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kvm/paging_tmpl.h |  11 +++--
 3 files changed, 128 insertions(+), 3 deletions(-)
 create mode 100644 arch/x86/kvm/mmutrace.h

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b67585c1ef0..c0dda6447b9 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -140,6 +140,9 @@ module_param(oos_shadow, bool, 0644);
 #define ACC_USER_MASK    PT_USER_MASK
 #define ACC_ALL          (ACC_EXEC_MASK | ACC_WRITE_MASK | ACC_USER_MASK)
 
+#define CREATE_TRACE_POINTS
+#include "mmutrace.h"
+
 #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 
 struct kvm_rmap_desc {
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
new file mode 100644
index 00000000000..1367f82717d
--- /dev/null
+++ b/arch/x86/kvm/mmutrace.h
@@ -0,0 +1,117 @@
+#if !defined(_TRACE_KVMMMU_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVMMMU_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvmmmu
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE mmutrace
+
+#define kvm_mmu_trace_pferr_flags       \
+	{ PFERR_PRESENT_MASK, "P" },	\
+	{ PFERR_WRITE_MASK, "W" },	\
+	{ PFERR_USER_MASK, "U" },	\
+	{ PFERR_RSVD_MASK, "RSVD" },	\
+	{ PFERR_FETCH_MASK, "F" }
+
+/*
+ * A pagetable walk has started
+ */
+TRACE_EVENT(
+	kvm_mmu_pagetable_walk,
+	TP_PROTO(u64 addr, int write_fault, int user_fault, int fetch_fault),
+	TP_ARGS(addr, write_fault, user_fault, fetch_fault),
+
+	TP_STRUCT__entry(
+		__field(__u64, addr)
+		__field(__u32, pferr)
+	),
+
+	TP_fast_assign(
+		__entry->addr = addr;
+		__entry->pferr = (!!write_fault << 1) | (!!user_fault << 2)
+		                 | (!!fetch_fault << 4);
+	),
+
+	TP_printk("addr %llx pferr %x %s", __entry->addr, __entry->pferr,
+		  __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
+);
+
+
+/* We just walked a paging element */
+TRACE_EVENT(
+	kvm_mmu_paging_element,
+	TP_PROTO(u64 pte, int level),
+	TP_ARGS(pte, level),
+
+	TP_STRUCT__entry(
+		__field(__u64, pte)
+		__field(__u32, level)
+		),
+
+	TP_fast_assign(
+		__entry->pte = pte;
+		__entry->level = level;
+		),
+
+	TP_printk("pte %llx level %u", __entry->pte, __entry->level)
+);
+
+/* We set a pte accessed bit */
+TRACE_EVENT(
+	kvm_mmu_set_accessed_bit,
+	TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+	TP_ARGS(table_gfn, index, size),
+
+	TP_STRUCT__entry(
+		__field(__u64, gpa)
+		),
+
+	TP_fast_assign(
+		__entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
+				+ index * size;
+		),
+
+	TP_printk("gpa %llx", __entry->gpa)
+);
+
+/* We set a pte dirty bit */
+TRACE_EVENT(
+	kvm_mmu_set_dirty_bit,
+	TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+	TP_ARGS(table_gfn, index, size),
+
+	TP_STRUCT__entry(
+		__field(__u64, gpa)
+		),
+
+	TP_fast_assign(
+		__entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
+				+ index * size;
+		),
+
+	TP_printk("gpa %llx", __entry->gpa)
+);
+
+TRACE_EVENT(
+	kvm_mmu_walker_error,
+	TP_PROTO(u32 pferr),
+	TP_ARGS(pferr),
+
+	TP_STRUCT__entry(
+		__field(__u32, pferr)
+		),
+
+	TP_fast_assign(
+		__entry->pferr = pferr;
+		),
+
+	TP_printk("pferr %x %s", __entry->pferr,
+		  __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
+);
+
+#endif /* _TRACE_KVMMMU_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 53e129cec5f..36ac6d70a84 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -125,13 +125,15 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
 	gpa_t pte_gpa;
 	int rsvd_fault = 0;
 
-	pgprintk("%s: addr %lx\n", __func__, addr);
+	trace_kvm_mmu_pagetable_walk(addr, write_fault, user_fault,
+				     fetch_fault);
 walk:
 	walker->level = vcpu->arch.mmu.root_level;
 	pte = vcpu->arch.cr3;
 #if PTTYPE == 64
 	if (!is_long_mode(vcpu)) {
 		pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
+		trace_kvm_mmu_paging_element(pte, walker->level);
 		if (!is_present_gpte(pte))
 			goto not_present;
 		--walker->level;
@@ -150,10 +152,9 @@ walk:
 		pte_gpa += index * sizeof(pt_element_t);
 		walker->table_gfn[walker->level - 1] = table_gfn;
 		walker->pte_gpa[walker->level - 1] = pte_gpa;
-		pgprintk("%s: table_gfn[%d] %lx\n", __func__,
-			 walker->level - 1, table_gfn);
 
 		kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
+		trace_kvm_mmu_paging_element(pte, walker->level);
 
 		if (!is_present_gpte(pte))
 			goto not_present;
@@ -175,6 +176,8 @@ walk:
 #endif
 
 		if (!(pte & PT_ACCESSED_MASK)) {
+			trace_kvm_mmu_set_accessed_bit(table_gfn, index,
+						       sizeof(pte));
 			mark_page_dirty(vcpu->kvm, table_gfn);
 			if (FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn,
 			    index, pte, pte|PT_ACCESSED_MASK))
@@ -208,6 +211,7 @@ walk:
 	if (write_fault && !is_dirty_gpte(pte)) {
 		bool ret;
 
+		trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
 		mark_page_dirty(vcpu->kvm, table_gfn);
 		ret = FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn, index, pte,
 			    pte|PT_DIRTY_MASK);
@@ -239,6 +243,7 @@ err:
 		walker->error_code |= PFERR_FETCH_MASK;
 	if (rsvd_fault)
 		walker->error_code |= PFERR_RSVD_MASK;
+	trace_kvm_mmu_walker_error(walker->error_code);
 	return 0;
 }
 
-- 
cgit v1.2.3


From f691fe1da7e2715137d21ae5a80bec64db4625db Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 6 Jul 2009 15:58:14 +0300
Subject: KVM: Trace shadow page lifecycle

Create, sync, unsync, zap.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c      |  10 +++--
 arch/x86/kvm/mmutrace.h | 103 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 109 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index c0dda6447b9..ac121b39a5b 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1122,6 +1122,7 @@ static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		return 1;
 	}
 
+	trace_kvm_mmu_sync_page(sp);
 	if (rmap_write_protect(vcpu->kvm, sp->gfn))
 		kvm_flush_remote_tlbs(vcpu->kvm);
 	kvm_unlink_unsync_page(vcpu->kvm, sp);
@@ -1244,8 +1245,6 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 		quadrant &= (1 << ((PT32_PT_BITS - PT64_PT_BITS) * level)) - 1;
 		role.quadrant = quadrant;
 	}
-	pgprintk("%s: looking gfn %lx role %x\n", __func__,
-		 gfn, role.word);
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	hlist_for_each_entry_safe(sp, node, tmp, bucket, hash_link)
@@ -1262,14 +1261,13 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 				set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
 				kvm_mmu_mark_parents_unsync(vcpu, sp);
 			}
-			pgprintk("%s: found\n", __func__);
+			trace_kvm_mmu_get_page(sp, false);
 			return sp;
 		}
 	++vcpu->kvm->stat.mmu_cache_miss;
 	sp = kvm_mmu_alloc_page(vcpu, parent_pte);
 	if (!sp)
 		return sp;
-	pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
 	sp->gfn = gfn;
 	sp->role = role;
 	hlist_add_head(&sp->hash_link, bucket);
@@ -1282,6 +1280,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 		vcpu->arch.mmu.prefetch_page(vcpu, sp);
 	else
 		nonpaging_prefetch_page(vcpu, sp);
+	trace_kvm_mmu_get_page(sp, true);
 	return sp;
 }
 
@@ -1410,6 +1409,8 @@ static int mmu_zap_unsync_children(struct kvm *kvm,
 static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	int ret;
+
+	trace_kvm_mmu_zap_page(sp);
 	++kvm->stat.mmu_shadow_zapped;
 	ret = mmu_zap_unsync_children(kvm, sp);
 	kvm_mmu_page_unlink_children(kvm, sp);
@@ -1656,6 +1657,7 @@ static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	struct kvm_mmu_page *s;
 	struct hlist_node *node, *n;
 
+	trace_kvm_mmu_unsync_page(sp);
 	index = kvm_page_table_hashfn(sp->gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	/* don't unsync if pagetable is shadowed with multiple roles */
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
index 1367f82717d..3e4a5c6ca2a 100644
--- a/arch/x86/kvm/mmutrace.h
+++ b/arch/x86/kvm/mmutrace.h
@@ -2,12 +2,48 @@
 #define _TRACE_KVMMMU_H
 
 #include <linux/tracepoint.h>
+#include <linux/ftrace_event.h>
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvmmmu
 #define TRACE_INCLUDE_PATH .
 #define TRACE_INCLUDE_FILE mmutrace
 
+#define KVM_MMU_PAGE_FIELDS \
+	__field(__u64, gfn) \
+	__field(__u32, role) \
+	__field(__u32, root_count) \
+	__field(__u32, unsync)
+
+#define KVM_MMU_PAGE_ASSIGN(sp)			     \
+	__entry->gfn = sp->gfn;			     \
+	__entry->role = sp->role.word;		     \
+	__entry->root_count = sp->root_count;        \
+	__entry->unsync = sp->unsync;
+
+#define KVM_MMU_PAGE_PRINTK() ({				        \
+	const char *ret = p->buffer + p->len;				\
+	static const char *access_str[] = {			        \
+		"---", "--x", "w--", "w-x", "-u-", "-ux", "wu-", "wux"  \
+	};							        \
+	union kvm_mmu_page_role role;				        \
+								        \
+	role.word = __entry->role;					\
+									\
+	trace_seq_printf(p, "sp gfn %llx %u/%u q%u%s %s%s %spge"	\
+			 " %snxe root %u %s%c",				\
+			 __entry->gfn, role.level, role.glevels,	\
+			 role.quadrant,					\
+			 role.direct ? " direct" : "",			\
+			 access_str[role.access],			\
+			 role.invalid ? " invalid" : "",		\
+			 role.cr4_pge ? "" : "!",			\
+			 role.nxe ? "" : "!",				\
+			 __entry->root_count,				\
+			 __entry->unsync ? "unsync" : "sync", 0);	\
+	ret;								\
+		})
+
 #define kvm_mmu_trace_pferr_flags       \
 	{ PFERR_PRESENT_MASK, "P" },	\
 	{ PFERR_WRITE_MASK, "W" },	\
@@ -111,6 +147,73 @@ TRACE_EVENT(
 		  __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
 );
 
+TRACE_EVENT(
+	kvm_mmu_get_page,
+	TP_PROTO(struct kvm_mmu_page *sp, bool created),
+	TP_ARGS(sp, created),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		__field(bool, created)
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		__entry->created = created;
+		),
+
+	TP_printk("%s %s", KVM_MMU_PAGE_PRINTK(),
+		  __entry->created ? "new" : "existing")
+);
+
+TRACE_EVENT(
+	kvm_mmu_sync_page,
+	TP_PROTO(struct kvm_mmu_page *sp),
+	TP_ARGS(sp),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		),
+
+	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
+TRACE_EVENT(
+	kvm_mmu_unsync_page,
+	TP_PROTO(struct kvm_mmu_page *sp),
+	TP_ARGS(sp),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		),
+
+	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
+TRACE_EVENT(
+	kvm_mmu_zap_page,
+	TP_PROTO(struct kvm_mmu_page *sp),
+	TP_ARGS(sp),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		),
+
+	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
 #endif /* _TRACE_KVMMMU_H */
 
 /* This part must be outside protection */
-- 
cgit v1.2.3


From f7c6d140032ae7e80df36d350c6edc41f92b2f94 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 2 Jul 2009 15:04:14 +0200
Subject: KVM: fix MMIO_CONF_BASE MSR access

Some Windows versions check whether the BIOS has setup MMI/O for
config space accesses on AMD Fam10h CPUs, we say "no" by returning 0 on
reads and only allow disabling of MMI/O CfgSpace setup by igoring "0" writes.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0e74d98641a..95fa45c0f16 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -844,6 +844,13 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			return 1;
 		}
 		break;
+	case MSR_FAM10H_MMIO_CONF_BASE:
+		if (data != 0) {
+			pr_unimpl(vcpu, "unimplemented MMIO_CONF_BASE wrmsr: "
+				"0x%llx\n", data);
+			return 1;
+		}
+		break;
 	case MSR_AMD64_NB_CFG:
 		break;
 	case MSR_IA32_DEBUGCTLMSR:
@@ -1055,6 +1062,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_K7_EVNTSEL0:
 	case MSR_K8_INT_PENDING_MSG:
 	case MSR_AMD64_NB_CFG:
+	case MSR_FAM10H_MMIO_CONF_BASE:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From 1000ff8d893765d7b56e32fe16dbe4814f172588 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 7 Jul 2009 16:00:57 +0300
Subject: KVM: Add trace points in irqchip code

Add tracepoint in msi/ioapic/pic set_irq() functions,
in IPI sending and in the point where IRQ is placed into
apic's IRR.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c |  3 ++
 arch/x86/kvm/lapic.c |  4 +++
 arch/x86/kvm/trace.h | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 92 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1d1bb75dc7b..e4bcbddecb3 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -30,6 +30,7 @@
 #include "irq.h"
 
 #include <linux/kvm_host.h>
+#include "trace.h"
 
 static void pic_lock(struct kvm_pic *s)
 	__acquires(&s->lock)
@@ -190,6 +191,8 @@ int kvm_pic_set_irq(void *opaque, int irq, int level)
 	if (irq >= 0 && irq < PIC_NUM_PINS) {
 		ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
 		pic_update_irq(s);
+		trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
+				      s->pics[irq >> 3].imr, ret == 0);
 	}
 	pic_unlock(s);
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 6c846030854..5d697602048 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -375,6 +375,8 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			break;
 
 		result = !apic_test_and_set_irr(vector, apic);
+		trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
+					  trig_mode, vector, result);
 		if (!result) {
 			if (trig_mode)
 				apic_debug("level trig mode repeatedly for "
@@ -493,6 +495,8 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 	else
 		irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
 
+	trace_kvm_apic_ipi(icr_low, irq.dest_id);
+
 	apic_debug("icr_high 0x%x, icr_low 0x%x, "
 		   "short_hand 0x%x, dest 0x%x, trig_mode 0x%x, level 0x%x, "
 		   "dest_mode 0x%x, delivery_mode 0x%x, vector 0x%x\n",
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 6c2c87fa6e4..0d480e77eac 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -264,6 +264,91 @@ TRACE_EVENT(kvm_cr,
 #define trace_kvm_cr_read(cr, val)		trace_kvm_cr(0, cr, val)
 #define trace_kvm_cr_write(cr, val)		trace_kvm_cr(1, cr, val)
 
+TRACE_EVENT(kvm_pic_set_irq,
+	    TP_PROTO(__u8 chip, __u8 pin, __u8 elcr, __u8 imr, bool coalesced),
+	    TP_ARGS(chip, pin, elcr, imr, coalesced),
+
+	TP_STRUCT__entry(
+		__field(	__u8,		chip		)
+		__field(	__u8,		pin		)
+		__field(	__u8,		elcr		)
+		__field(	__u8,		imr		)
+		__field(	bool,		coalesced	)
+	),
+
+	TP_fast_assign(
+		__entry->chip		= chip;
+		__entry->pin		= pin;
+		__entry->elcr		= elcr;
+		__entry->imr		= imr;
+		__entry->coalesced	= coalesced;
+	),
+
+	TP_printk("chip %u pin %u (%s%s)%s",
+		  __entry->chip, __entry->pin,
+		  (__entry->elcr & (1 << __entry->pin)) ? "level":"edge",
+		  (__entry->imr & (1 << __entry->pin)) ? "|masked":"",
+		  __entry->coalesced ? " (coalesced)" : "")
+);
+
+#define kvm_apic_dst_shorthand		\
+	{0x0, "dst"},			\
+	{0x1, "self"},			\
+	{0x2, "all"},			\
+	{0x3, "all-but-self"}
+
+TRACE_EVENT(kvm_apic_ipi,
+	    TP_PROTO(__u32 icr_low, __u32 dest_id),
+	    TP_ARGS(icr_low, dest_id),
+
+	TP_STRUCT__entry(
+		__field(	__u32,		icr_low		)
+		__field(	__u32,		dest_id		)
+	),
+
+	TP_fast_assign(
+		__entry->icr_low	= icr_low;
+		__entry->dest_id	= dest_id;
+	),
+
+	TP_printk("dst %x vec %u (%s|%s|%s|%s|%s)",
+		  __entry->dest_id, (u8)__entry->icr_low,
+		  __print_symbolic((__entry->icr_low >> 8 & 0x7),
+				   kvm_deliver_mode),
+		  (__entry->icr_low & (1<<11)) ? "logical" : "physical",
+		  (__entry->icr_low & (1<<14)) ? "assert" : "de-assert",
+		  (__entry->icr_low & (1<<15)) ? "level" : "edge",
+		  __print_symbolic((__entry->icr_low >> 18 & 0x3),
+				   kvm_apic_dst_shorthand))
+);
+
+TRACE_EVENT(kvm_apic_accept_irq,
+	    TP_PROTO(__u32 apicid, __u16 dm, __u8 tm, __u8 vec, bool coalesced),
+	    TP_ARGS(apicid, dm, tm, vec, coalesced),
+
+	TP_STRUCT__entry(
+		__field(	__u32,		apicid		)
+		__field(	__u16,		dm		)
+		__field(	__u8,		tm		)
+		__field(	__u8,		vec		)
+		__field(	bool,		coalesced	)
+	),
+
+	TP_fast_assign(
+		__entry->apicid		= apicid;
+		__entry->dm		= dm;
+		__entry->tm		= tm;
+		__entry->vec		= vec;
+		__entry->coalesced	= coalesced;
+	),
+
+	TP_printk("apicid %x vec %u (%s|%s)%s",
+		  __entry->apicid, __entry->vec,
+		  __print_symbolic((__entry->dm >> 8 & 0x7), kvm_deliver_mode),
+		  __entry->tm ? "level" : "edge",
+		  __entry->coalesced ? " (coalesced)" : "")
+);
+
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
-- 
cgit v1.2.3


From c7f0f24b1f82ec049fcfb8e6d4e1cee2815efbe5 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 7 Jul 2009 15:27:32 +0300
Subject: KVM: No need to kick cpu if not in a guest mode

This will save a couple of IPIs.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 95fa45c0f16..e3d9040f215 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3506,6 +3506,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	smp_mb__after_clear_bit();
 
 	if (vcpu->requests || need_resched() || signal_pending(current)) {
+		set_bit(KVM_REQ_KICK, &vcpu->requests);
 		local_irq_enable();
 		preempt_enable();
 		r = 1;
-- 
cgit v1.2.3


From 0d1de2d901f4ba0972a3886496a44fb1d3300dbd Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 12 Jul 2009 16:10:55 +0300
Subject: KVM: Always report x2apic as supported feature

We emulate x2apic in software, so host support is not required.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e3d9040f215..dfb0e37b3c6 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1504,6 +1504,9 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	case 1:
 		entry->edx &= kvm_supported_word0_x86_features;
 		entry->ecx &= kvm_supported_word4_x86_features;
+		/* we support x2apic emulation even if host does not support
+		 * it since we emulate x2apic in software */
+		entry->ecx |= F(X2APIC);
 		break;
 	/* function 2 entries are STATEFUL. That is, repeated cpuid commands
 	 * may return different values. This forces us to get_cpu() before
-- 
cgit v1.2.3


From e9f4275732add046fed4a548b8dbb98dbe500d2f Mon Sep 17 00:00:00 2001
From: Beth Kon <eak@us.ibm.com>
Date: Tue, 7 Jul 2009 11:50:38 -0400
Subject: KVM: PIT support for HPET legacy mode

When kvm is in hpet_legacy_mode, the hpet is providing the timer
interrupt and the pit should not be. So in legacy mode, the pit timer
is destroyed, but the *state* of the pit is maintained. So if kvm or
the guest tries to modify the state of the pit, this modification is
accepted, *except* that the timer isn't actually started. When we exit
hpet_legacy_mode, the current state of the pit (which is up to date
since we've been accepting modifications) is used to restart the pit
timer.

The saved_mode code in kvm_pit_load_count temporarily changes mode to
0xff in order to destroy the timer, but then restores the actual
value, again maintaining "current" state of the pit for possible later
reenablement.

[avi: add some reserved storage in the ioctl; make SET_PIT2 IOW]
[marcelo: fix memory corruption due to reserved storage]

Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm.h |  9 +++++++
 arch/x86/kvm/i8254.c       | 22 +++++++++++++----
 arch/x86/kvm/i8254.h       |  3 ++-
 arch/x86/kvm/x86.c         | 59 +++++++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 87 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 708b9c32a5d..4a5fe914dc5 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -18,6 +18,7 @@
 #define __KVM_HAVE_GUEST_DEBUG
 #define __KVM_HAVE_MSIX
 #define __KVM_HAVE_MCE
+#define __KVM_HAVE_PIT_STATE2
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
@@ -237,6 +238,14 @@ struct kvm_pit_state {
 	struct kvm_pit_channel_state channels[3];
 };
 
+#define KVM_PIT_FLAGS_HPET_LEGACY  0x00000001
+
+struct kvm_pit_state2 {
+	struct kvm_pit_channel_state channels[3];
+	__u32 flags;
+	__u32 reserved[9];
+};
+
 struct kvm_reinject_control {
 	__u8 pit_reinject;
 	__u8 reserved[31];
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 8c3ac30ef9b..9b62c57ba6e 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -332,20 +332,33 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 	case 1:
         /* FIXME: enhance mode 4 precision */
 	case 4:
-		create_pit_timer(ps, val, 0);
+		if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) {
+			create_pit_timer(ps, val, 0);
+		}
 		break;
 	case 2:
 	case 3:
-		create_pit_timer(ps, val, 1);
+		if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){
+			create_pit_timer(ps, val, 1);
+		}
 		break;
 	default:
 		destroy_pit_timer(&ps->pit_timer);
 	}
 }
 
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val)
+void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start)
 {
-	pit_load_count(kvm, channel, val);
+	u8 saved_mode;
+	if (hpet_legacy_start) {
+		/* save existing mode for later reenablement */
+		saved_mode = kvm->arch.vpit->pit_state.channels[0].mode;
+		kvm->arch.vpit->pit_state.channels[0].mode = 0xff; /* disable timer */
+		pit_load_count(kvm, channel, val);
+		kvm->arch.vpit->pit_state.channels[0].mode = saved_mode;
+	} else {
+		pit_load_count(kvm, channel, val);
+	}
 }
 
 static inline struct kvm_pit *dev_to_pit(struct kvm_io_device *dev)
@@ -554,6 +567,7 @@ void kvm_pit_reset(struct kvm_pit *pit)
 	struct kvm_kpit_channel_state *c;
 
 	mutex_lock(&pit->pit_state.lock);
+	pit->pit_state.flags = 0;
 	for (i = 0; i < 3; i++) {
 		c = &pit->pit_state.channels[i];
 		c->mode = 0xff;
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index b2670180f22..d4c1c7ffdc0 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -21,6 +21,7 @@ struct kvm_kpit_channel_state {
 
 struct kvm_kpit_state {
 	struct kvm_kpit_channel_state channels[3];
+	u32 flags;
 	struct kvm_timer pit_timer;
 	bool is_periodic;
 	u32    speaker_data_on;
@@ -49,7 +50,7 @@ struct kvm_pit {
 #define KVM_PIT_CHANNEL_MASK	    0x3
 
 void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu);
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val);
+void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start);
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags);
 void kvm_free_pit(struct kvm *kvm);
 void kvm_pit_reset(struct kvm_pit *pit);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index dfb0e37b3c6..2214384ff61 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1213,6 +1213,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_ASSIGN_DEV_IRQ:
 	case KVM_CAP_IRQFD:
 	case KVM_CAP_PIT2:
+	case KVM_CAP_PIT_STATE2:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -2078,7 +2079,36 @@ static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 
 	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
-	kvm_pit_load_count(kvm, 0, ps->channels[0].count);
+	kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0);
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
+{
+	int r = 0;
+
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
+	memcpy(ps->channels, &kvm->arch.vpit->pit_state.channels,
+		sizeof(ps->channels));
+	ps->flags = kvm->arch.vpit->pit_state.flags;
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
+{
+	int r = 0, start = 0;
+	u32 prev_legacy, cur_legacy;
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
+	prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY;
+	cur_legacy = ps->flags & KVM_PIT_FLAGS_HPET_LEGACY;
+	if (!prev_legacy && cur_legacy)
+		start = 1;
+	memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels,
+	       sizeof(kvm->arch.vpit->pit_state.channels));
+	kvm->arch.vpit->pit_state.flags = ps->flags;
+	kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start);
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
@@ -2140,6 +2170,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	 */
 	union {
 		struct kvm_pit_state ps;
+		struct kvm_pit_state2 ps2;
 		struct kvm_memory_alias alias;
 		struct kvm_pit_config pit_config;
 	} u;
@@ -2322,6 +2353,32 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
+	case KVM_GET_PIT2: {
+		r = -ENXIO;
+		if (!kvm->arch.vpit)
+			goto out;
+		r = kvm_vm_ioctl_get_pit2(kvm, &u.ps2);
+		if (r)
+			goto out;
+		r = -EFAULT;
+		if (copy_to_user(argp, &u.ps2, sizeof(u.ps2)))
+			goto out;
+		r = 0;
+		break;
+	}
+	case KVM_SET_PIT2: {
+		r = -EFAULT;
+		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
+			goto out;
+		r = -ENXIO;
+		if (!kvm->arch.vpit)
+			goto out;
+		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+		if (r)
+			goto out;
+		r = 0;
+		break;
+	}
 	case KVM_REINJECT_CONTROL: {
 		struct kvm_reinject_control control;
 		r =  -EFAULT;
-- 
cgit v1.2.3


From 090b7aff27120cdae76a346a70db394844fea598 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Tue, 7 Jul 2009 17:08:44 -0400
Subject: KVM: make io_bus interface more robust

Today kvm_io_bus_regsiter_dev() returns void and will internally BUG_ON
if it fails.  We want to create dynamic MMIO/PIO entries driven from
userspace later in the series, so we need to enhance the code to be more
robust with the following changes:

   1) Add a return value to the registration function
   2) Fix up all the callsites to check the return code, handle any
      failures, and percolate the error up to the caller.
   3) Add an unregister function that collapses holes in the array

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 20 ++++++++++++++++++--
 arch/x86/kvm/i8259.c |  9 ++++++++-
 2 files changed, 26 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 9b62c57ba6e..137e5481710 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -605,6 +605,7 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
 	struct kvm_kpit_state *pit_state;
+	int ret;
 
 	pit = kzalloc(sizeof(struct kvm_pit), GFP_KERNEL);
 	if (!pit)
@@ -639,14 +640,29 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 
 	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
-	__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+	ret = __kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+	if (ret < 0)
+		goto fail;
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
 		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
-		__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+		ret = __kvm_io_bus_register_dev(&kvm->pio_bus,
+						&pit->speaker_dev);
+		if (ret < 0)
+			goto fail_unregister;
 	}
 
 	return pit;
+
+fail_unregister:
+	__kvm_io_bus_unregister_dev(&kvm->pio_bus, &pit->dev);
+
+fail:
+	if (pit->irq_source_id >= 0)
+		kvm_free_irq_source_id(kvm, pit->irq_source_id);
+
+	kfree(pit);
+	return NULL;
 }
 
 void kvm_free_pit(struct kvm *kvm)
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index e4bcbddecb3..daf4606b029 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -539,6 +539,8 @@ static const struct kvm_io_device_ops picdev_ops = {
 struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 {
 	struct kvm_pic *s;
+	int ret;
+
 	s = kzalloc(sizeof(struct kvm_pic), GFP_KERNEL);
 	if (!s)
 		return NULL;
@@ -555,6 +557,11 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	 * Initialize PIO device
 	 */
 	kvm_iodevice_init(&s->dev, &picdev_ops);
-	kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
+	ret = kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
+	if (ret < 0) {
+		kfree(s);
+		return NULL;
+	}
+
 	return s;
 }
-- 
cgit v1.2.3


From d34e6b175e61821026893ec5298cc8e7558df43a Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Tue, 7 Jul 2009 17:08:49 -0400
Subject: KVM: add ioeventfd support

ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd
signal when written to by a guest.  Host userspace can register any
arbitrary IO address with a corresponding eventfd and then pass the eventfd
to a specific end-point of interest for handling.

Normal IO requires a blocking round-trip since the operation may cause
side-effects in the emulated model or may return data to the caller.
Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM
"heavy-weight" exit back to userspace, and is ultimately serviced by qemu's
device model synchronously before returning control back to the vcpu.

However, there is a subclass of IO which acts purely as a trigger for
other IO (such as to kick off an out-of-band DMA request, etc).  For these
patterns, the synchronous call is particularly expensive since we really
only want to simply get our notification transmitted asychronously and
return as quickly as possible.  All the sychronous infrastructure to ensure
proper data-dependencies are met in the normal IO case are just unecessary
overhead for signalling.  This adds additional computational load on the
system, as well as latency to the signalling path.

Therefore, we provide a mechanism for registration of an in-kernel trigger
point that allows the VCPU to only require a very brief, lightweight
exit just long enough to signal an eventfd.  This also means that any
clients compatible with the eventfd interface (which includes userspace
and kernelspace equally well) can now register to be notified. The end
result should be a more flexible and higher performance notification API
for the backend KVM hypervisor and perhipheral components.

To test this theory, we built a test-harness called "doorbell".  This
module has a function called "doorbell_ring()" which simply increments a
counter for each time the doorbell is signaled.  It supports signalling
from either an eventfd, or an ioctl().

We then wired up two paths to the doorbell: One via QEMU via a registered
io region and through the doorbell ioctl().  The other is direct via
ioeventfd.

You can download this test harness here:

ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2

The measured results are as follows:

qemu-mmio:       110000 iops, 9.09us rtt
ioeventfd-mmio: 200100 iops, 5.00us rtt
ioeventfd-pio:  367300 iops, 2.72us rtt

I didn't measure qemu-pio, because I have to figure out how to register a
PIO region with qemu's device model, and I got lazy.  However, for now we
can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO,
and -350ns for HC, we get:

qemu-pio:      153139 iops, 6.53us rtt
ioeventfd-hc: 412585 iops, 2.37us rtt

these are just for fun, for now, until I can gather more data.

Here is a graph for your convenience:

http://developer.novell.com/wiki/images/7/76/Iofd-chart.png

The conclusion to draw is that we save about 4us by skipping the userspace
hop.

--------------------

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2214384ff61..42160b031fc 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1212,6 +1212,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IRQ_INJECT_STATUS:
 	case KVM_CAP_ASSIGN_DEV_IRQ:
 	case KVM_CAP_IRQFD:
+	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_PIT2:
 	case KVM_CAP_PIT_STATE2:
 		r = 1;
-- 
cgit v1.2.3


From a205bc19f0d203f31a15bd2f9464ef05f918b77e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 9 Jul 2009 16:36:01 +0200
Subject: KVM: MMU: Fix MMU_DEBUG compile breakage

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index ac121b39a5b..f1f08159e11 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1808,8 +1808,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	pgprintk("%s: setting spte %llx\n", __func__, *sptep);
 	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
 		 is_large_pte(*sptep)? "2MB" : "4kB",
-		 is_present_pte(*sptep)?"RW":"R", gfn,
-		 *shadow_pte, sptep);
+		 *sptep & PT_PRESENT_MASK ?"RW":"R", gfn,
+		 *sptep, sptep);
 	if (!was_rmapped && is_large_pte(*sptep))
 		++vcpu->kvm->stat.lpages;
 
-- 
cgit v1.2.3


From b59bb7bdf08ee98e0d1f1758901f545655b7a413 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 9 Jul 2009 15:33:51 +0300
Subject: KVM: Move exception handling to the same place as other events

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 42160b031fc..11cfd897aac 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -223,13 +223,6 @@ void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 }
 EXPORT_SYMBOL_GPL(kvm_queue_exception_e);
 
-static void __queue_exception(struct kvm_vcpu *vcpu)
-{
-	kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
-				     vcpu->arch.exception.has_error_code,
-				     vcpu->arch.exception.error_code);
-}
-
 /*
  * Load the pae pdptrs.  Return true is they are all valid.
  */
@@ -3491,9 +3484,16 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 	kvm_x86_ops->update_cr8_intercept(vcpu, tpr, max_irr);
 }
 
-static void inject_pending_irq(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void inject_pending_event(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	/* try to reinject previous events if any */
+	if (vcpu->arch.exception.pending) {
+		kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
+					  vcpu->arch.exception.has_error_code,
+					  vcpu->arch.exception.error_code);
+		return;
+	}
+
 	if (vcpu->arch.nmi_injected) {
 		kvm_x86_ops->set_nmi(vcpu);
 		return;
@@ -3574,10 +3574,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		goto out;
 	}
 
-	if (vcpu->arch.exception.pending)
-		__queue_exception(vcpu);
-	else
-		inject_pending_irq(vcpu, kvm_run);
+	inject_pending_event(vcpu, kvm_run);
 
 	/* enable NMI/IRQ window open exits if needed */
 	if (vcpu->arch.nmi_pending)
-- 
cgit v1.2.3


From 0b71785dc05f1f66e6268022b9953c0d6a9985c6 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 9 Jul 2009 15:33:53 +0300
Subject: KVM: Move kvm_cpu_get_interrupt() declaration to x86 code

It is implemented only by x86.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 30b625d8e5f..3f4f00a2353 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -797,5 +797,6 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
 int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
+int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
 
 #endif /* _ASM_X86_KVM_HOST_H */
-- 
cgit v1.2.3


From a1b37100d9e29c1f8dc3e2f5490a205c80180e01 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 9 Jul 2009 15:33:52 +0300
Subject: KVM: Reduce runnability interface with arch support code

Remove kvm_cpu_has_interrupt() and kvm_arch_interrupt_allowed() from
interface between general code and arch code. kvm_arch_vcpu_runnable()
checks for interrupts instead.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c        | 16 ++--------------
 arch/powerpc/kvm/powerpc.c      | 13 +------------
 arch/s390/kvm/interrupt.c       |  8 +-------
 arch/x86/include/asm/kvm_host.h |  2 ++
 arch/x86/kvm/x86.c              |  6 ++++--
 5 files changed, 10 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d7aa6bb8f47..0ad09f05efa 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1935,19 +1935,6 @@ int kvm_highest_pending_irq(struct kvm_vcpu *vcpu)
     return find_highest_bits((int *)&vpd->irr[0]);
 }
 
-int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
-{
-	if (kvm_highest_pending_irq(vcpu) != -1)
-		return 1;
-	return 0;
-}
-
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
-	/* do real check here */
-	return 1;
-}
-
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.timer_fired;
@@ -1960,7 +1947,8 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE;
+	return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE) ||
+		(kvm_highest_pending_irq(vcpu) != -1);
 }
 
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 0341391eff1..2a4551f78f6 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -39,20 +39,9 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 	return gfn;
 }
 
-int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
-{
-	return !!(v->arch.pending_exceptions);
-}
-
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
-	/* do real check here */
-	return 1;
-}
-
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
-	return !(v->arch.msr & MSR_WE);
+	return !(v->arch.msr & MSR_WE) || !!(v->arch.pending_exceptions);
 }
 
 
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 4d613415c43..2c2f9835341 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -283,7 +283,7 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
-int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
+static int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 {
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
 	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
@@ -320,12 +320,6 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 	return rc;
 }
 
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
-	/* do real check here */
-	return 1;
-}
-
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	return 0;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 3f4f00a2353..08732d7b6d9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -797,6 +797,8 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
 int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
+int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
 int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
 
 #endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 11cfd897aac..b87d65d89a0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4890,8 +4890,10 @@ void kvm_arch_flush_shadow(struct kvm *kvm)
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE
-	       || vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED
-	       || vcpu->arch.nmi_pending;
+		|| vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED
+		|| vcpu->arch.nmi_pending ||
+		(kvm_arch_interrupt_allowed(vcpu) &&
+		 kvm_cpu_has_interrupt(vcpu));
 }
 
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
-- 
cgit v1.2.3


From 4088bb3caee82086fd85a844604274f6237f66a7 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Wed, 8 Jul 2009 11:26:54 +0300
Subject: KVM: silence lapic kernel messages that can be triggered by a guest

Some Linux versions (f8) try to read EOI register that is write only.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/lapic.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 5d697602048..66122bfc74a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -597,14 +597,14 @@ static int apic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
 	static const u64 rmask = 0x43ff01ffffffe70cULL;
 
 	if ((alignment + len) > 4) {
-		printk(KERN_ERR "KVM_APIC_READ: alignment error %x %d\n",
-				offset, len);
+		apic_debug("KVM_APIC_READ: alignment error %x %d\n",
+			   offset, len);
 		return 1;
 	}
 
 	if (offset > 0x3f0 || !(rmask & (1ULL << (offset >> 4)))) {
-		printk(KERN_ERR "KVM_APIC_READ: read reserved register %x\n",
-				offset);
+		apic_debug("KVM_APIC_READ: read reserved register %x\n",
+			   offset);
 		return 1;
 	}
 
-- 
cgit v1.2.3


From 3662cb1cd6ed26873ca808f3e16cc54246ad40ca Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Thu, 9 Jul 2009 17:00:42 +0800
Subject: KVM: Discard unnecessary kvm_mmu_flush_tlb() in kvm_mmu_load()

set_cr3() should already cover the TLB flushing.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f1f08159e11..87c67f44927 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2373,8 +2373,8 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	if (r)
 		goto out;
+	/* set_cr3() should ensure TLB has been flushed */
 	kvm_x86_ops->set_cr3(vcpu, vcpu->arch.mmu.root_hpa);
-	kvm_mmu_flush_tlb(vcpu);
 out:
 	return r;
 }
-- 
cgit v1.2.3


From 6a1ac77110ee3e8d8dfdef8442f3b30b3d83e6a2 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 15 Jul 2009 15:34:41 -0300
Subject: KVM: MMU: fix missing locking in alloc_mmu_pages

n_requested_mmu_pages/n_free_mmu_pages are used by
kvm_mmu_change_mmu_pages to calculate the number of pages to zap.

alloc_mmu_pages, called from the vcpu initialization path, modifies this
variables without proper locking, which can result in a negative value
in kvm_mmu_change_mmu_pages (say, with cpu hotplug).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/mmu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 87c67f44927..86c2551fe13 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2728,12 +2728,14 @@ static int alloc_mmu_pages(struct kvm_vcpu *vcpu)
 
 	ASSERT(vcpu);
 
+	spin_lock(&vcpu->kvm->mmu_lock);
 	if (vcpu->kvm->arch.n_requested_mmu_pages)
 		vcpu->kvm->arch.n_free_mmu_pages =
 					vcpu->kvm->arch.n_requested_mmu_pages;
 	else
 		vcpu->kvm->arch.n_free_mmu_pages =
 					vcpu->kvm->arch.n_alloc_mmu_pages;
+	spin_unlock(&vcpu->kvm->mmu_lock);
 	/*
 	 * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
 	 * Therefore we need to allocate shadow page tables in the first
-- 
cgit v1.2.3


From decde80b6a2fedd6ea62ea5c4bc4b3cb9fabf153 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 12 Jul 2009 17:13:29 +0300
Subject: KVM: s390: remove unused structs

They are not used by common code without defines which s390 does not
have.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/s390/include/asm/kvm.h | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
index 0b2f829f6d5..3dfcaeb5d7f 100644
--- a/arch/s390/include/asm/kvm.h
+++ b/arch/s390/include/asm/kvm.h
@@ -15,15 +15,6 @@
  */
 #include <linux/types.h>
 
-/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
-struct kvm_pic_state {
-	/* no PIC for s390 */
-};
-
-struct kvm_ioapic_state {
-	/* no IOAPIC for s390 */
-};
-
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
 	/* general purpose regs for s390 */
-- 
cgit v1.2.3


From 46a359e71526909a18a47aaf4347343d6d1d74b2 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 18 Jul 2009 23:58:32 +0900
Subject: KVM: x86: use get_desc_base() and get_desc_limit()

Use get_desc_base() and get_desc_limit() to get the base address and
limit in desc_struct.

Cc: Avi Kivity <avi@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/x86.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index b87d65d89a0..6277a316821 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -142,8 +142,7 @@ unsigned long segment_base(u16 selector)
 		table_base = segment_base(ldt_selector);
 	}
 	d = (struct desc_struct *)(table_base + (selector & ~7));
-	v = d->base0 | ((unsigned long)d->base1 << 16) |
-		((unsigned long)d->base2 << 24);
+	v = get_desc_base(d);
 #ifdef CONFIG_X86_64
 	if (d->s == 0 && (d->type == 2 || d->type == 9 || d->type == 11))
 		v |= ((unsigned long)((struct ldttss_desc64 *)d)->base3) << 32;
@@ -3947,11 +3946,8 @@ static void kvm_set_segment(struct kvm_vcpu *vcpu,
 static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
 				   struct kvm_segment *kvm_desct)
 {
-	kvm_desct->base = seg_desc->base0;
-	kvm_desct->base |= seg_desc->base1 << 16;
-	kvm_desct->base |= seg_desc->base2 << 24;
-	kvm_desct->limit = seg_desc->limit0;
-	kvm_desct->limit |= seg_desc->limit << 16;
+	kvm_desct->base = get_desc_base(seg_desc);
+	kvm_desct->limit = get_desc_limit(seg_desc);
 	if (seg_desc->g) {
 		kvm_desct->limit <<= 12;
 		kvm_desct->limit |= 0xfff;
@@ -4030,11 +4026,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
 			     struct desc_struct *seg_desc)
 {
-	u32 base_addr;
-
-	base_addr = seg_desc->base0;
-	base_addr |= (seg_desc->base1 << 16);
-	base_addr |= (seg_desc->base2 << 24);
+	u32 base_addr = get_desc_base(seg_desc);
 
 	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
@@ -4323,7 +4315,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 		}
 	}
 
-	if (!nseg_desc.p || (nseg_desc.limit0 | nseg_desc.limit << 16) < 0x67) {
+	if (!nseg_desc.p || get_desc_limit(&nseg_desc) < 0x67) {
 		kvm_queue_exception_e(vcpu, TS_VECTOR, tss_selector & 0xfffc);
 		return 1;
 	}
-- 
cgit v1.2.3


From b792c344dfd57ee2cf737440e4a9b4a5bc39d1db Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:00:01 +0900
Subject: KVM: x86: use kvm_get_gdt() and kvm_read_ldt()

Use kvm_get_gdt() and kvm_read_ldt() to reduce inline assembly code.

Cc: Avi Kivity <avi@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/svm.c | 6 +++---
 arch/x86/kvm/x86.c | 5 ++---
 2 files changed, 5 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 8728e514c85..92fc0dab505 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -290,7 +290,7 @@ static void svm_hardware_enable(void *garbage)
 
 	struct svm_cpu_data *svm_data;
 	uint64_t efer;
-	struct desc_ptr gdt_descr;
+	struct descriptor_table gdt_descr;
 	struct desc_struct *gdt;
 	int me = raw_smp_processor_id();
 
@@ -310,8 +310,8 @@ static void svm_hardware_enable(void *garbage)
 	svm_data->max_asid = cpuid_ebx(SVM_CPUID_FUNC) - 1;
 	svm_data->next_asid = svm_data->max_asid + 1;
 
-	asm volatile ("sgdt %0" : "=m"(gdt_descr));
-	gdt = (struct desc_struct *)gdt_descr.address;
+	kvm_get_gdt(&gdt_descr);
+	gdt = (struct desc_struct *)gdt_descr.base;
 	svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
 
 	rdmsrl(MSR_EFER, efer);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6277a316821..c7ec0c921c0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -132,13 +132,12 @@ unsigned long segment_base(u16 selector)
 	if (selector == 0)
 		return 0;
 
-	asm("sgdt %0" : "=m"(gdt));
+	kvm_get_gdt(&gdt);
 	table_base = gdt.base;
 
 	if (selector & 4) {           /* from ldt */
-		u16 ldt_selector;
+		u16 ldt_selector = kvm_read_ldt();
 
-		asm("sldt %0" : "=g"(ldt_selector));
 		table_base = segment_base(ldt_selector);
 	}
 	d = (struct desc_struct *)(table_base + (selector & ~7));
-- 
cgit v1.2.3


From b927a3cec081a605142f5b7e90b730611bee28b1 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Tue, 21 Jul 2009 10:42:48 +0800
Subject: KVM: VMX: Introduce KVM_SET_IDENTITY_MAP_ADDR ioctl

Now KVM allow guest to modify guest's physical address of EPT's identity mapping page.

(change from v1, discard unnecessary check, change ioctl to accept parameter
address rather than value)

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/vmx.c              | 15 ++++++++++-----
 arch/x86/kvm/x86.c              | 19 +++++++++++++++++++
 3 files changed, 30 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 08732d7b6d9..e210b218df4 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -411,6 +411,7 @@ struct kvm_arch{
 
 	struct page *ept_identity_pagetable;
 	bool ept_identity_pagetable_done;
+	gpa_t ept_identity_map_addr;
 
 	unsigned long irq_sources_bitmap;
 	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c6256b98f07..686e1abb681 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1719,7 +1719,7 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
-			VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+			vcpu->kvm->arch.ept_identity_map_addr;
 	}
 
 	vmx_flush_tlb(vcpu);
@@ -2122,7 +2122,7 @@ static int init_rmode_identity_map(struct kvm *kvm)
 	if (likely(kvm->arch.ept_identity_pagetable_done))
 		return 1;
 	ret = 0;
-	identity_map_pfn = VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT;
+	identity_map_pfn = kvm->arch.ept_identity_map_addr >> PAGE_SHIFT;
 	r = kvm_clear_guest_page(kvm, identity_map_pfn, 0, PAGE_SIZE);
 	if (r < 0)
 		goto out;
@@ -2191,14 +2191,15 @@ static int alloc_identity_pagetable(struct kvm *kvm)
 		goto out;
 	kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
 	kvm_userspace_mem.flags = 0;
-	kvm_userspace_mem.guest_phys_addr = VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+	kvm_userspace_mem.guest_phys_addr =
+		kvm->arch.ept_identity_map_addr;
 	kvm_userspace_mem.memory_size = PAGE_SIZE;
 	r = __kvm_set_memory_region(kvm, &kvm_userspace_mem, 0);
 	if (r)
 		goto out;
 
 	kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
-			VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT);
+			kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
 out:
 	up_write(&kvm->slots_lock);
 	return r;
@@ -3814,9 +3815,13 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		if (alloc_apic_access_page(kvm) != 0)
 			goto free_vmcs;
 
-	if (enable_ept)
+	if (enable_ept) {
+		if (!kvm->arch.ept_identity_map_addr)
+			kvm->arch.ept_identity_map_addr =
+				VMX_EPT_IDENTITY_PAGETABLE_ADDR;
 		if (alloc_identity_pagetable(kvm) != 0)
 			goto free_vmcs;
+	}
 
 	return &vmx->vcpu;
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c7ec0c921c0..f4cb1baaa04 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1206,6 +1206,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_PIT2:
 	case KVM_CAP_PIT_STATE2:
+	case KVM_CAP_SET_IDENTITY_MAP_ADDR:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1906,6 +1907,13 @@ static int kvm_vm_ioctl_set_tss_addr(struct kvm *kvm, unsigned long addr)
 	return ret;
 }
 
+static int kvm_vm_ioctl_set_identity_map_addr(struct kvm *kvm,
+					      u64 ident_addr)
+{
+	kvm->arch.ept_identity_map_addr = ident_addr;
+	return 0;
+}
+
 static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
 					  u32 kvm_nr_mmu_pages)
 {
@@ -2173,6 +2181,17 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (r < 0)
 			goto out;
 		break;
+	case KVM_SET_IDENTITY_MAP_ADDR: {
+		u64 ident_addr;
+
+		r = -EFAULT;
+		if (copy_from_user(&ident_addr, argp, sizeof ident_addr))
+			goto out;
+		r = kvm_vm_ioctl_set_identity_map_addr(kvm, ident_addr);
+		if (r < 0)
+			goto out;
+		break;
+	}
 	case KVM_SET_MEMORY_REGION: {
 		struct kvm_memory_region kvm_mem;
 		struct kvm_userspace_memory_region kvm_userspace_mem;
-- 
cgit v1.2.3


From 84fde248fe42f130cdda39faaa8bb1224c6a13ff Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 16 Jul 2009 17:03:30 +0300
Subject: KVM: PIT: Unregister ack notifier callback when freeing

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/i8254.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 137e5481710..472653c15a2 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -672,6 +672,8 @@ void kvm_free_pit(struct kvm *kvm)
 	if (kvm->arch.vpit) {
 		kvm_unregister_irq_mask_notifier(kvm, 0,
 					       &kvm->arch.vpit->mask_notifier);
+		kvm_unregister_irq_ack_notifier(kvm,
+				&kvm->arch.vpit->pit_state.irq_ack_notifier);
 		mutex_lock(&kvm->arch.vpit->pit_state.lock);
 		timer = &kvm->arch.vpit->pit_state.pit_timer.timer;
 		hrtimer_cancel(timer);
-- 
cgit v1.2.3


From 7f582ab6d8116ce8db5792c219a278519deae6ad Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Wed, 22 Jul 2009 23:53:01 +0200
Subject: KVM: VMX: Avoid to return ENOTSUPP to userland

Choose some allowed error values for the cases VMX returned ENOTSUPP so
far as these values could be returned by the KVM_RUN IOCTL.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 686e1abb681..c5aaa1b5fdb 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3133,7 +3133,7 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		printk(KERN_ERR
 		       "Fail to handle apic access vmexit! Offset is 0x%lx\n",
 		       offset);
-		return -ENOTSUPP;
+		return -ENOEXEC;
 	}
 	return 1;
 }
@@ -3202,7 +3202,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	if (exit_qualification & (1 << 6)) {
 		printk(KERN_ERR "EPT: GPA exceeds GAW!\n");
-		return -ENOTSUPP;
+		return -EINVAL;
 	}
 
 	gla_validity = (exit_qualification >> 7) & 0x3;
-- 
cgit v1.2.3


From 5f0269f5d72f622514daec9af158c32e933800b6 Mon Sep 17 00:00:00 2001
From: Mikhail Ershov <arcezed@gmail.com>
Date: Mon, 3 Aug 2009 14:58:25 +0300
Subject: KVM: Align cr8 threshold when userspace changes cr8

Commit f0a3602c20 ("KVM: Move interrupt injection logic to x86.c") does not
update the cr8 intercept if the lapic is disabled, so when userspace updates
cr8, the cr8 threshold control is not updated and we are left with illegal
control fields.

Fix by explicitly resetting the cr8 threshold.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f4cb1baaa04..69de7248083 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4445,6 +4445,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
 	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
+	update_cr8_intercept(vcpu);
+
 	/* Older userspace won't unhalt the vcpu on reset. */
 	if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
 	    sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
-- 
cgit v1.2.3


From 1444885a045fe3b1905a14ea1b52540bf556578b Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Mon, 27 Jul 2009 23:41:01 -0300
Subject: KVM: limit lapic periodic timer frequency

Otherwise its possible to starve the host by programming lapic timer
with a very high frequency.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 66122bfc74a..5b9d1ae09ca 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -670,6 +670,15 @@ static void start_apic_timer(struct kvm_lapic *apic)
 
 	if (!apic->lapic_timer.period)
 		return;
+	/*
+	 * Do not allow the guest to program periodic timers with small
+	 * interval, since the hrtimers are not throttled by the host
+	 * scheduler.
+	 */
+	if (apic_lvtt_period(apic)) {
+		if (apic->lapic_timer.period < NSEC_PER_MSEC/2)
+			apic->lapic_timer.period = NSEC_PER_MSEC/2;
+	}
 
 	hrtimer_start(&apic->lapic_timer.timer,
 		      ktime_add_ns(now, apic->lapic_timer.period),
-- 
cgit v1.2.3


From 44ad9944f151390363fc6edaba466de8dfef050f Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:42 +0200
Subject: KVM: MMU: make rmap code aware of mapping levels

This patch removes the largepage parameter from the rmap_add function.
Together with rmap_remove this function now uses the role.level field to
find determine if the page is a huge page.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 53 ++++++++++++++++++++++++++++-------------------------
 1 file changed, 28 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 86c2551fe13..b93ad2c79c1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -479,19 +479,19 @@ static int is_largepage_backed(struct kvm_vcpu *vcpu, gfn_t large_gfn)
  * Note: gfn must be unaliased before this function get called
  */
 
-static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
+static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int level)
 {
 	struct kvm_memory_slot *slot;
 	unsigned long idx;
 
 	slot = gfn_to_memslot(kvm, gfn);
-	if (!lpage)
+	if (likely(level == PT_PAGE_TABLE_LEVEL))
 		return &slot->rmap[gfn - slot->base_gfn];
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
+	idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
+		(slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
 
-	return &slot->lpage_info[0][idx].rmap_pde;
+	return &slot->lpage_info[level - 2][idx].rmap_pde;
 }
 
 /*
@@ -507,7 +507,7 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
  * the spte was not added.
  *
  */
-static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
 	struct kvm_mmu_page *sp;
 	struct kvm_rmap_desc *desc;
@@ -519,7 +519,7 @@ static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	gfn = unalias_gfn(vcpu->kvm, gfn);
 	sp = page_header(__pa(spte));
 	sp->gfns[spte - sp->spt] = gfn;
-	rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 	if (!*rmapp) {
 		rmap_printk("rmap_add: %p %llx 0->1\n", spte, *spte);
 		*rmapp = (unsigned long)spte;
@@ -589,7 +589,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 		kvm_release_pfn_dirty(pfn);
 	else
 		kvm_release_pfn_clean(pfn);
-	rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], is_large_pte(*spte));
+	rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
 	if (!*rmapp) {
 		printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
 		BUG();
@@ -652,10 +652,10 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 {
 	unsigned long *rmapp;
 	u64 *spte;
-	int write_protected = 0;
+	int i, write_protected = 0;
 
 	gfn = unalias_gfn(kvm, gfn);
-	rmapp = gfn_to_rmap(kvm, gfn, 0);
+	rmapp = gfn_to_rmap(kvm, gfn, PT_PAGE_TABLE_LEVEL);
 
 	spte = rmap_next(kvm, rmapp, NULL);
 	while (spte) {
@@ -677,21 +677,24 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 	}
 
 	/* check for huge page mappings */
-	rmapp = gfn_to_rmap(kvm, gfn, 1);
-	spte = rmap_next(kvm, rmapp, NULL);
-	while (spte) {
-		BUG_ON(!spte);
-		BUG_ON(!(*spte & PT_PRESENT_MASK));
-		BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
-		pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
-		if (is_writeble_pte(*spte)) {
-			rmap_remove(kvm, spte);
-			--kvm->stat.lpages;
-			__set_spte(spte, shadow_trap_nonpresent_pte);
-			spte = NULL;
-			write_protected = 1;
+	for (i = PT_DIRECTORY_LEVEL;
+	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+		rmapp = gfn_to_rmap(kvm, gfn, i);
+		spte = rmap_next(kvm, rmapp, NULL);
+		while (spte) {
+			BUG_ON(!spte);
+			BUG_ON(!(*spte & PT_PRESENT_MASK));
+			BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
+			pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
+			if (is_writeble_pte(*spte)) {
+				rmap_remove(kvm, spte);
+				--kvm->stat.lpages;
+				__set_spte(spte, shadow_trap_nonpresent_pte);
+				spte = NULL;
+				write_protected = 1;
+			}
+			spte = rmap_next(kvm, rmapp, spte);
 		}
-		spte = rmap_next(kvm, rmapp, spte);
 	}
 
 	return write_protected;
@@ -1815,7 +1818,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 
 	page_header_update_slot(vcpu->kvm, sptep, gfn);
 	if (!was_rmapped) {
-		rmap_count = rmap_add(vcpu, sptep, gfn, largepage);
+		rmap_count = rmap_add(vcpu, sptep, gfn);
 		if (!is_rmap_spte(*sptep))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
-- 
cgit v1.2.3


From d25797b24c0ff2efc2b2fabaebb0ec0cafc0d3e3 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:43 +0200
Subject: KVM: MMU: rename is_largepage_backed to mapping_level

With the new name and the corresponding backend changes this function
can now support multiple hugepage sizes.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 100 ++++++++++++++++++++++++++++++---------------
 arch/x86/kvm/paging_tmpl.h |   4 +-
 2 files changed, 69 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b93ad2c79c1..c707936b241 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -393,37 +393,52 @@ static void mmu_free_rmap_desc(struct kvm_rmap_desc *rd)
  * Return the pointer to the largepage write count for a given
  * gfn, handling slots that are not large page aligned.
  */
-static int *slot_largepage_idx(gfn_t gfn, struct kvm_memory_slot *slot)
+static int *slot_largepage_idx(gfn_t gfn,
+			       struct kvm_memory_slot *slot,
+			       int level)
 {
 	unsigned long idx;
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
-	return &slot->lpage_info[0][idx].write_count;
+	idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
+	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
+	return &slot->lpage_info[level - 2][idx].write_count;
 }
 
 static void account_shadowed(struct kvm *kvm, gfn_t gfn)
 {
+	struct kvm_memory_slot *slot;
 	int *write_count;
+	int i;
 
 	gfn = unalias_gfn(kvm, gfn);
-	write_count = slot_largepage_idx(gfn,
-					 gfn_to_memslot_unaliased(kvm, gfn));
-	*write_count += 1;
+
+	slot = gfn_to_memslot_unaliased(kvm, gfn);
+	for (i = PT_DIRECTORY_LEVEL;
+	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+		write_count   = slot_largepage_idx(gfn, slot, i);
+		*write_count += 1;
+	}
 }
 
 static void unaccount_shadowed(struct kvm *kvm, gfn_t gfn)
 {
+	struct kvm_memory_slot *slot;
 	int *write_count;
+	int i;
 
 	gfn = unalias_gfn(kvm, gfn);
-	write_count = slot_largepage_idx(gfn,
-					 gfn_to_memslot_unaliased(kvm, gfn));
-	*write_count -= 1;
-	WARN_ON(*write_count < 0);
+	for (i = PT_DIRECTORY_LEVEL;
+	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+		slot          = gfn_to_memslot_unaliased(kvm, gfn);
+		write_count   = slot_largepage_idx(gfn, slot, i);
+		*write_count -= 1;
+		WARN_ON(*write_count < 0);
+	}
 }
 
-static int has_wrprotected_page(struct kvm *kvm, gfn_t gfn)
+static int has_wrprotected_page(struct kvm *kvm,
+				gfn_t gfn,
+				int level)
 {
 	struct kvm_memory_slot *slot;
 	int *largepage_idx;
@@ -431,47 +446,67 @@ static int has_wrprotected_page(struct kvm *kvm, gfn_t gfn)
 	gfn = unalias_gfn(kvm, gfn);
 	slot = gfn_to_memslot_unaliased(kvm, gfn);
 	if (slot) {
-		largepage_idx = slot_largepage_idx(gfn, slot);
+		largepage_idx = slot_largepage_idx(gfn, slot, level);
 		return *largepage_idx;
 	}
 
 	return 1;
 }
 
-static int host_largepage_backed(struct kvm *kvm, gfn_t gfn)
+static int host_mapping_level(struct kvm *kvm, gfn_t gfn)
 {
+	unsigned long page_size = PAGE_SIZE;
 	struct vm_area_struct *vma;
 	unsigned long addr;
-	int ret = 0;
+	int i, ret = 0;
 
 	addr = gfn_to_hva(kvm, gfn);
 	if (kvm_is_error_hva(addr))
-		return ret;
+		return page_size;
 
 	down_read(&current->mm->mmap_sem);
 	vma = find_vma(current->mm, addr);
-	if (vma && is_vm_hugetlb_page(vma))
-		ret = 1;
+	if (!vma)
+		goto out;
+
+	page_size = vma_kernel_pagesize(vma);
+
+out:
 	up_read(&current->mm->mmap_sem);
 
+	for (i = PT_PAGE_TABLE_LEVEL;
+	     i < (PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES); ++i) {
+		if (page_size >= KVM_HPAGE_SIZE(i))
+			ret = i;
+		else
+			break;
+	}
+
 	return ret;
 }
 
-static int is_largepage_backed(struct kvm_vcpu *vcpu, gfn_t large_gfn)
+static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
 {
 	struct kvm_memory_slot *slot;
-
-	if (has_wrprotected_page(vcpu->kvm, large_gfn))
-		return 0;
-
-	if (!host_largepage_backed(vcpu->kvm, large_gfn))
-		return 0;
+	int host_level;
+	int level = PT_PAGE_TABLE_LEVEL;
 
 	slot = gfn_to_memslot(vcpu->kvm, large_gfn);
 	if (slot && slot->dirty_bitmap)
-		return 0;
+		return PT_PAGE_TABLE_LEVEL;
 
-	return 1;
+	host_level = host_mapping_level(vcpu->kvm, large_gfn);
+
+	if (host_level == PT_PAGE_TABLE_LEVEL)
+		return host_level;
+
+	for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) {
+
+		if (has_wrprotected_page(vcpu->kvm, large_gfn, level))
+			break;
+	}
+
+	return level - 1;
 }
 
 /*
@@ -1733,7 +1768,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	if ((pte_access & ACC_WRITE_MASK)
 	    || (write_fault && !is_write_protection(vcpu) && !user_fault)) {
 
-		if (largepage && has_wrprotected_page(vcpu->kvm, gfn)) {
+		if (largepage && has_wrprotected_page(vcpu->kvm, gfn, 1)) {
 			ret = 1;
 			spte = shadow_trap_nonpresent_pte;
 			goto set_pte;
@@ -1884,8 +1919,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	pfn_t pfn;
 	unsigned long mmu_seq;
 
-	if (is_largepage_backed(vcpu, gfn &
-			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
@@ -2091,8 +2125,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	if (r)
 		return r;
 
-	if (is_largepage_backed(vcpu, gfn &
-			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
@@ -2494,7 +2527,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
-	if (is_large_pte(gpte) && is_largepage_backed(vcpu, gfn)) {
+	if (is_large_pte(gpte) &&
+	    (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL)) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 36ac6d70a84..44f0346578c 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -407,8 +407,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	if (walker.level == PT_DIRECTORY_LEVEL) {
 		gfn_t large_gfn;
 		large_gfn = walker.gfn &
-			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		if (is_largepage_backed(vcpu, large_gfn)) {
+			    ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
+		if (mapping_level(vcpu, large_gfn) == PT_DIRECTORY_LEVEL) {
 			walker.gfn = large_gfn;
 			largepage = 1;
 		}
-- 
cgit v1.2.3


From 852e3c19ac64b7c3912e8efe42d3ce090ebc0161 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:44 +0200
Subject: KVM: MMU: make direct mapping paths aware of mapping levels

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  2 +-
 arch/x86/kvm/mmu.c              | 83 ++++++++++++++++++++++++-----------------
 arch/x86/kvm/paging_tmpl.h      |  6 +--
 3 files changed, 53 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index e210b218df4..e09dc26d96b 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -315,7 +315,7 @@ struct kvm_vcpu_arch {
 	struct {
 		gfn_t gfn;	/* presumed gfn during guest pte update */
 		pfn_t pfn;	/* pfn corresponding to that gfn */
-		int largepage;
+		int level;
 		unsigned long mmu_seq;
 	} update_pte;
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index c707936b241..110c224ed1f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -257,7 +257,7 @@ static int is_last_spte(u64 pte, int level)
 {
 	if (level == PT_PAGE_TABLE_LEVEL)
 		return 1;
-	if (level == PT_DIRECTORY_LEVEL && is_large_pte(pte))
+	if (is_large_pte(pte))
 		return 1;
 	return 0;
 }
@@ -753,7 +753,7 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
 static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 			  int (*handler)(struct kvm *kvm, unsigned long *rmapp))
 {
-	int i;
+	int i, j;
 	int retval = 0;
 
 	/*
@@ -772,11 +772,15 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 		end = start + (memslot->npages << PAGE_SHIFT);
 		if (hva >= start && hva < end) {
 			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
-			int idx = gfn_offset /
-			          KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL);
+
 			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
-			retval |= handler(kvm,
-					&memslot->lpage_info[0][idx].rmap_pde);
+
+			for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
+				int idx = gfn_offset;
+				idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
+				retval |= handler(kvm,
+					&memslot->lpage_info[j][idx].rmap_pde);
+			}
 		}
 	}
 
@@ -814,12 +818,15 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
 
 #define RMAP_RECYCLE_THRESHOLD 1000
 
-static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
 	unsigned long *rmapp;
+	struct kvm_mmu_page *sp;
+
+	sp = page_header(__pa(spte));
 
 	gfn = unalias_gfn(vcpu->kvm, gfn);
-	rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 
 	kvm_unmap_rmapp(vcpu->kvm, rmapp);
 	kvm_flush_remote_tlbs(vcpu->kvm);
@@ -1734,7 +1741,7 @@ static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
 
 static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int user_fault,
-		    int write_fault, int dirty, int largepage,
+		    int write_fault, int dirty, int level,
 		    gfn_t gfn, pfn_t pfn, bool speculative,
 		    bool can_unsync)
 {
@@ -1757,7 +1764,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		spte |= shadow_nx_mask;
 	if (pte_access & ACC_USER_MASK)
 		spte |= shadow_user_mask;
-	if (largepage)
+	if (level > PT_PAGE_TABLE_LEVEL)
 		spte |= PT_PAGE_SIZE_MASK;
 	if (tdp_enabled)
 		spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
@@ -1768,7 +1775,8 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	if ((pte_access & ACC_WRITE_MASK)
 	    || (write_fault && !is_write_protection(vcpu) && !user_fault)) {
 
-		if (largepage && has_wrprotected_page(vcpu->kvm, gfn, 1)) {
+		if (level > PT_PAGE_TABLE_LEVEL &&
+		    has_wrprotected_page(vcpu->kvm, gfn, level)) {
 			ret = 1;
 			spte = shadow_trap_nonpresent_pte;
 			goto set_pte;
@@ -1806,7 +1814,7 @@ set_pte:
 static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 			 unsigned pt_access, unsigned pte_access,
 			 int user_fault, int write_fault, int dirty,
-			 int *ptwrite, int largepage, gfn_t gfn,
+			 int *ptwrite, int level, gfn_t gfn,
 			 pfn_t pfn, bool speculative)
 {
 	int was_rmapped = 0;
@@ -1823,7 +1831,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
 		 * the parent of the now unreachable PTE.
 		 */
-		if (largepage && !is_large_pte(*sptep)) {
+		if (level > PT_PAGE_TABLE_LEVEL &&
+		    !is_large_pte(*sptep)) {
 			struct kvm_mmu_page *child;
 			u64 pte = *sptep;
 
@@ -1836,8 +1845,9 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		} else
 			was_rmapped = 1;
 	}
+
 	if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
-		      dirty, largepage, gfn, pfn, speculative, true)) {
+		      dirty, level, gfn, pfn, speculative, true)) {
 		if (write_fault)
 			*ptwrite = 1;
 		kvm_x86_ops->tlb_flush(vcpu);
@@ -1857,7 +1867,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		if (!is_rmap_spte(*sptep))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
-			rmap_recycle(vcpu, gfn, largepage);
+			rmap_recycle(vcpu, sptep, gfn);
 	} else {
 		if (was_writeble)
 			kvm_release_pfn_dirty(pfn);
@@ -1875,7 +1885,7 @@ static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
 }
 
 static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
-			int largepage, gfn_t gfn, pfn_t pfn)
+			int level, gfn_t gfn, pfn_t pfn)
 {
 	struct kvm_shadow_walk_iterator iterator;
 	struct kvm_mmu_page *sp;
@@ -1883,11 +1893,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 	gfn_t pseudo_gfn;
 
 	for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) {
-		if (iterator.level == PT_PAGE_TABLE_LEVEL
-		    || (largepage && iterator.level == PT_DIRECTORY_LEVEL)) {
+		if (iterator.level == level) {
 			mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
 				     0, write, 1, &pt_write,
-				     largepage, gfn, pfn, false);
+				     level, gfn, pfn, false);
 			++vcpu->stat.pf_fixed;
 			break;
 		}
@@ -1915,14 +1924,20 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 {
 	int r;
-	int largepage = 0;
+	int level;
 	pfn_t pfn;
 	unsigned long mmu_seq;
 
-	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		largepage = 1;
-	}
+	level = mapping_level(vcpu, gfn);
+
+	/*
+	 * This path builds a PAE pagetable - so we can map 2mb pages at
+	 * maximum. Therefore check if the level is larger than that.
+	 */
+	if (level > PT_DIRECTORY_LEVEL)
+		level = PT_DIRECTORY_LEVEL;
+
+	gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
 
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
@@ -1938,7 +1953,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	if (mmu_notifier_retry(vcpu, mmu_seq))
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
-	r = __direct_map(vcpu, v, write, largepage, gfn, pfn);
+	r = __direct_map(vcpu, v, write, level, gfn, pfn);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 
@@ -2114,7 +2129,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 {
 	pfn_t pfn;
 	int r;
-	int largepage = 0;
+	int level;
 	gfn_t gfn = gpa >> PAGE_SHIFT;
 	unsigned long mmu_seq;
 
@@ -2125,10 +2140,10 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	if (r)
 		return r;
 
-	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		largepage = 1;
-	}
+	level = mapping_level(vcpu, gfn);
+
+	gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
+
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
@@ -2141,7 +2156,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
-			 largepage, gfn, pfn);
+			 level, gfn, pfn);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
@@ -2448,7 +2463,7 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
 				  const void *new)
 {
 	if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
-		if (!vcpu->arch.update_pte.largepage ||
+		if (vcpu->arch.update_pte.level == PT_PAGE_TABLE_LEVEL ||
 		    sp->role.glevels == PT32_ROOT_LEVEL) {
 			++vcpu->kvm->stat.mmu_pde_zapped;
 			return;
@@ -2498,7 +2513,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	u64 gpte = 0;
 	pfn_t pfn;
 
-	vcpu->arch.update_pte.largepage = 0;
+	vcpu->arch.update_pte.level = PT_PAGE_TABLE_LEVEL;
 
 	if (bytes != 4 && bytes != 8)
 		return;
@@ -2530,7 +2545,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	if (is_large_pte(gpte) &&
 	    (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL)) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		vcpu->arch.update_pte.largepage = 1;
+		vcpu->arch.update_pte.level = PT_DIRECTORY_LEVEL;
 	}
 	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 44f0346578c..b167f0d57b5 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -253,7 +253,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pt_element_t gpte;
 	unsigned pte_access;
 	pfn_t pfn;
-	int largepage = vcpu->arch.update_pte.largepage;
+	int level = vcpu->arch.update_pte.level;
 
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
@@ -272,7 +272,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
-		     gpte & PT_DIRTY_MASK, NULL, largepage,
+		     gpte & PT_DIRTY_MASK, NULL, level,
 		     gpte_to_gfn(gpte), pfn, true);
 }
 
@@ -306,7 +306,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 				     gw->pte_access & access,
 				     user_fault, write_fault,
 				     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
-				     ptwrite, largepage,
+				     ptwrite, level,
 				     gw->gfn, pfn, false);
 			break;
 		}
-- 
cgit v1.2.3


From e04da980c35d75fa050ba4009ad99025432d8d7d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:45 +0200
Subject: KVM: MMU: make page walker aware of mapping levels

The page walker may be used with nested paging too when accessing mmio
areas.  Make it support the additional page-level too.

[ Marcelo: fix reserved bit check for 1gb pte ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 17 ++++++++++++++-
 arch/x86/kvm/paging_tmpl.h | 52 +++++++++++++++++++++++++---------------------
 2 files changed, 44 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 110c224ed1f..09ab6433bf1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -108,6 +108,9 @@ module_param(oos_shadow, bool, 0644);
 
 #define PT32_LEVEL_MASK(level) \
 		(((1ULL << PT32_LEVEL_BITS) - 1) << PT32_LEVEL_SHIFT(level))
+#define PT32_LVL_OFFSET_MASK(level) \
+	(PT32_BASE_ADDR_MASK & ((1ULL << (PAGE_SHIFT + (((level) - 1) \
+						* PT32_LEVEL_BITS))) - 1))
 
 #define PT32_INDEX(address, level)\
 	(((address) >> PT32_LEVEL_SHIFT(level)) & ((1 << PT32_LEVEL_BITS) - 1))
@@ -116,10 +119,19 @@ module_param(oos_shadow, bool, 0644);
 #define PT64_BASE_ADDR_MASK (((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1))
 #define PT64_DIR_BASE_ADDR_MASK \
 	(PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + PT64_LEVEL_BITS)) - 1))
+#define PT64_LVL_ADDR_MASK(level) \
+	(PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
+						* PT64_LEVEL_BITS))) - 1))
+#define PT64_LVL_OFFSET_MASK(level) \
+	(PT64_BASE_ADDR_MASK & ((1ULL << (PAGE_SHIFT + (((level) - 1) \
+						* PT64_LEVEL_BITS))) - 1))
 
 #define PT32_BASE_ADDR_MASK PAGE_MASK
 #define PT32_DIR_BASE_ADDR_MASK \
 	(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + PT32_LEVEL_BITS)) - 1))
+#define PT32_LVL_ADDR_MASK(level) \
+	(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
+					    * PT32_LEVEL_BITS))) - 1))
 
 #define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | PT_USER_MASK \
 			| PT64_NX_MASK)
@@ -130,6 +142,7 @@ module_param(oos_shadow, bool, 0644);
 #define PFERR_RSVD_MASK (1U << 3)
 #define PFERR_FETCH_MASK (1U << 4)
 
+#define PT_PDPE_LEVEL 3
 #define PT_DIRECTORY_LEVEL 2
 #define PT_PAGE_TABLE_LEVEL 1
 
@@ -2273,7 +2286,9 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[0][0] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51);
 		context->rsvd_bits_mask[1][3] = context->rsvd_bits_mask[0][3];
-		context->rsvd_bits_mask[1][2] = context->rsvd_bits_mask[0][2];
+		context->rsvd_bits_mask[1][2] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 51) |
+			rsvd_bits(13, 29);
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51) |
 			rsvd_bits(13, 20);		/* large page */
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index b167f0d57b5..578276e34bd 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -27,7 +27,8 @@
 	#define guest_walker guest_walker64
 	#define FNAME(name) paging##64_##name
 	#define PT_BASE_ADDR_MASK PT64_BASE_ADDR_MASK
-	#define PT_DIR_BASE_ADDR_MASK PT64_DIR_BASE_ADDR_MASK
+	#define PT_LVL_ADDR_MASK(lvl) PT64_LVL_ADDR_MASK(lvl)
+	#define PT_LVL_OFFSET_MASK(lvl) PT64_LVL_OFFSET_MASK(lvl)
 	#define PT_INDEX(addr, level) PT64_INDEX(addr, level)
 	#define PT_LEVEL_MASK(level) PT64_LEVEL_MASK(level)
 	#define PT_LEVEL_BITS PT64_LEVEL_BITS
@@ -43,7 +44,8 @@
 	#define guest_walker guest_walker32
 	#define FNAME(name) paging##32_##name
 	#define PT_BASE_ADDR_MASK PT32_BASE_ADDR_MASK
-	#define PT_DIR_BASE_ADDR_MASK PT32_DIR_BASE_ADDR_MASK
+	#define PT_LVL_ADDR_MASK(lvl) PT32_LVL_ADDR_MASK(lvl)
+	#define PT_LVL_OFFSET_MASK(lvl) PT32_LVL_OFFSET_MASK(lvl)
 	#define PT_INDEX(addr, level) PT32_INDEX(addr, level)
 	#define PT_LEVEL_MASK(level) PT32_LEVEL_MASK(level)
 	#define PT_LEVEL_BITS PT32_LEVEL_BITS
@@ -53,8 +55,8 @@
 	#error Invalid PTTYPE value
 #endif
 
-#define gpte_to_gfn FNAME(gpte_to_gfn)
-#define gpte_to_gfn_pde FNAME(gpte_to_gfn_pde)
+#define gpte_to_gfn_lvl FNAME(gpte_to_gfn_lvl)
+#define gpte_to_gfn(pte) gpte_to_gfn_lvl((pte), PT_PAGE_TABLE_LEVEL)
 
 /*
  * The guest_walker structure emulates the behavior of the hardware page
@@ -71,14 +73,9 @@ struct guest_walker {
 	u32 error_code;
 };
 
-static gfn_t gpte_to_gfn(pt_element_t gpte)
+static gfn_t gpte_to_gfn_lvl(pt_element_t gpte, int lvl)
 {
-	return (gpte & PT_BASE_ADDR_MASK) >> PAGE_SHIFT;
-}
-
-static gfn_t gpte_to_gfn_pde(pt_element_t gpte)
-{
-	return (gpte & PT_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
+	return (gpte & PT_LVL_ADDR_MASK(lvl)) >> PAGE_SHIFT;
 }
 
 static bool FNAME(cmpxchg_gpte)(struct kvm *kvm,
@@ -189,18 +186,24 @@ walk:
 
 		walker->ptes[walker->level - 1] = pte;
 
-		if (walker->level == PT_PAGE_TABLE_LEVEL) {
-			walker->gfn = gpte_to_gfn(pte);
-			break;
-		}
-
-		if (walker->level == PT_DIRECTORY_LEVEL
-		    && (pte & PT_PAGE_SIZE_MASK)
-		    && (PTTYPE == 64 || is_pse(vcpu))) {
-			walker->gfn = gpte_to_gfn_pde(pte);
-			walker->gfn += PT_INDEX(addr, PT_PAGE_TABLE_LEVEL);
-			if (PTTYPE == 32 && is_cpuid_PSE36())
+		if ((walker->level == PT_PAGE_TABLE_LEVEL) ||
+		    ((walker->level == PT_DIRECTORY_LEVEL) &&
+				(pte & PT_PAGE_SIZE_MASK)  &&
+				(PTTYPE == 64 || is_pse(vcpu))) ||
+		    ((walker->level == PT_PDPE_LEVEL) &&
+				(pte & PT_PAGE_SIZE_MASK)  &&
+				is_long_mode(vcpu))) {
+			int lvl = walker->level;
+
+			walker->gfn = gpte_to_gfn_lvl(pte, lvl);
+			walker->gfn += (addr & PT_LVL_OFFSET_MASK(lvl))
+					>> PAGE_SHIFT;
+
+			if (PTTYPE == 32 &&
+			    walker->level == PT_DIRECTORY_LEVEL &&
+			    is_cpuid_PSE36())
 				walker->gfn += pse36_gfn_delta(pte);
+
 			break;
 		}
 
@@ -609,9 +612,10 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 #undef PT_BASE_ADDR_MASK
 #undef PT_INDEX
 #undef PT_LEVEL_MASK
-#undef PT_DIR_BASE_ADDR_MASK
+#undef PT_LVL_ADDR_MASK
+#undef PT_LVL_OFFSET_MASK
 #undef PT_LEVEL_BITS
 #undef PT_MAX_FULL_LEVELS
 #undef gpte_to_gfn
-#undef gpte_to_gfn_pde
+#undef gpte_to_gfn_lvl
 #undef CMPXCHG
-- 
cgit v1.2.3


From 7e4e4056f72da51c5dede48515df0ecd20eaf8ca Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:46 +0200
Subject: KVM: MMU: shadow support for 1gb pages

This patch adds support for shadow paging to the 1gb page table code in KVM.
With this code the guest can use 1gb pages even if the host does not support
them.

[ Marcelo: fix shadow page collision on pmd level if a guest 1gb page is mapped
           with 4kb ptes on host level ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 -
 arch/x86/kvm/mmu.c              | 14 ++------------
 arch/x86/kvm/paging_tmpl.h      | 43 +++++++++++++++++++----------------------
 3 files changed, 22 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index e09dc26d96b..c9fb2bc13a8 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -315,7 +315,6 @@ struct kvm_vcpu_arch {
 	struct {
 		gfn_t gfn;	/* presumed gfn during guest pte update */
 		pfn_t pfn;	/* pfn corresponding to that gfn */
-		int level;
 		unsigned long mmu_seq;
 	} update_pte;
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 09ab6433bf1..1249c12e1d5 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2478,11 +2478,8 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
 				  const void *new)
 {
 	if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
-		if (vcpu->arch.update_pte.level == PT_PAGE_TABLE_LEVEL ||
-		    sp->role.glevels == PT32_ROOT_LEVEL) {
-			++vcpu->kvm->stat.mmu_pde_zapped;
-			return;
-		}
+		++vcpu->kvm->stat.mmu_pde_zapped;
+		return;
         }
 
 	++vcpu->kvm->stat.mmu_pte_updated;
@@ -2528,8 +2525,6 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	u64 gpte = 0;
 	pfn_t pfn;
 
-	vcpu->arch.update_pte.level = PT_PAGE_TABLE_LEVEL;
-
 	if (bytes != 4 && bytes != 8)
 		return;
 
@@ -2557,11 +2552,6 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
-	if (is_large_pte(gpte) &&
-	    (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL)) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		vcpu->arch.update_pte.level = PT_DIRECTORY_LEVEL;
-	}
 	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 578276e34bd..d2fec9c12d2 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -256,7 +256,6 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pt_element_t gpte;
 	unsigned pte_access;
 	pfn_t pfn;
-	int level = vcpu->arch.update_pte.level;
 
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
@@ -275,7 +274,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
-		     gpte & PT_DIRTY_MASK, NULL, level,
+		     gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL,
 		     gpte_to_gfn(gpte), pfn, true);
 }
 
@@ -284,7 +283,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
  */
 static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			 struct guest_walker *gw,
-			 int user_fault, int write_fault, int largepage,
+			 int user_fault, int write_fault, int hlevel,
 			 int *ptwrite, pfn_t pfn)
 {
 	unsigned access = gw->pt_access;
@@ -303,8 +302,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 	for_each_shadow_entry(vcpu, addr, iterator) {
 		level = iterator.level;
 		sptep = iterator.sptep;
-		if (level == PT_PAGE_TABLE_LEVEL
-		    || (largepage && level == PT_DIRECTORY_LEVEL)) {
+		if (iterator.level == hlevel) {
 			mmu_set_spte(vcpu, sptep, access,
 				     gw->pte_access & access,
 				     user_fault, write_fault,
@@ -323,12 +321,15 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			kvm_flush_remote_tlbs(vcpu->kvm);
 		}
 
-		if (level == PT_DIRECTORY_LEVEL
-		    && gw->level == PT_DIRECTORY_LEVEL) {
+		if (level <= gw->level) {
+			int delta = level - gw->level + 1;
 			direct = 1;
-			if (!is_dirty_gpte(gw->ptes[level - 1]))
+			if (!is_dirty_gpte(gw->ptes[level - delta]))
 				access &= ~ACC_WRITE_MASK;
-			table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
+			table_gfn = gpte_to_gfn(gw->ptes[level - delta]);
+			/* advance table_gfn when emulating 1gb pages with 4k */
+			if (delta == 0)
+				table_gfn += PT_INDEX(addr, level);
 		} else {
 			direct = 0;
 			table_gfn = gw->table_gfn[level - 2];
@@ -381,7 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int write_pt = 0;
 	int r;
 	pfn_t pfn;
-	int largepage = 0;
+	int level = PT_PAGE_TABLE_LEVEL;
 	unsigned long mmu_seq;
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
@@ -407,15 +408,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		return 0;
 	}
 
-	if (walker.level == PT_DIRECTORY_LEVEL) {
-		gfn_t large_gfn;
-		large_gfn = walker.gfn &
-			    ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		if (mapping_level(vcpu, large_gfn) == PT_DIRECTORY_LEVEL) {
-			walker.gfn = large_gfn;
-			largepage = 1;
-		}
+	if (walker.level >= PT_DIRECTORY_LEVEL) {
+		level = min(walker.level, mapping_level(vcpu, walker.gfn));
+		walker.gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE(level) - 1);
 	}
+
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
@@ -432,8 +429,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	sptep = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
-			     largepage, &write_pt, pfn);
-
+			     level, &write_pt, pfn);
 	pgprintk("%s: shadow pte %p %llx ptwrite %d\n", __func__,
 		 sptep, *sptep, write_pt);
 
@@ -468,8 +464,9 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 		sptep = iterator.sptep;
 
 		/* FIXME: properly handle invlpg on large guest pages */
-		if (level == PT_PAGE_TABLE_LEVEL ||
-		    ((level == PT_DIRECTORY_LEVEL) && is_large_pte(*sptep))) {
+		if (level == PT_PAGE_TABLE_LEVEL  ||
+		    ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) ||
+		    ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) {
 			struct kvm_mmu_page *sp = page_header(__pa(sptep));
 
 			pte_gpa = (sp->gfn << PAGE_SHIFT);
@@ -599,7 +596,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		nr_present++;
 		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
 		set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
-			 is_dirty_gpte(gpte), 0, gfn,
+			 is_dirty_gpte(gpte), PT_PAGE_TABLE_LEVEL, gfn,
 			 spte_to_pfn(sp->spt[i]), true, false);
 	}
 
-- 
cgit v1.2.3


From 04326caacff2b162d359c15a2edf634448897d1a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:47 +0200
Subject: KVM: MMU: enable gbpages by increasing nr of pagesizes

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c9fb2bc13a8..3315efaacf9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -55,7 +55,7 @@
 #define UNMAPPED_GVA (~(gpa_t)0)
 
 /* KVM Hugepage definitions for x86 */
-#define KVM_NR_PAGE_SIZES	2
+#define KVM_NR_PAGE_SIZES	3
 #define KVM_HPAGE_SHIFT(x)	(PAGE_SHIFT + (((x) - 1) * 9))
 #define KVM_HPAGE_SIZE(x)	(1UL << KVM_HPAGE_SHIFT(x))
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
-- 
cgit v1.2.3


From 344f414fa0f16254dd07195d4cd11b2f92931d3d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:48 +0200
Subject: KVM: report 1GB page support to userspace

If userspace knows that the kernel part supports 1GB pages it can enable
the corresponding cpuid bit so that guests actually use GB pages.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 2 ++
 arch/x86/kvm/svm.c              | 6 ++++++
 arch/x86/kvm/vmx.c              | 6 ++++++
 arch/x86/kvm/x86.c              | 3 ++-
 4 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 3315efaacf9..b17d845897b 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -528,6 +528,8 @@ struct kvm_x86_ops {
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
 	int (*get_tdp_level)(void);
 	u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
+	bool (*gb_page_enable)(void);
+
 	const struct trace_print_flags *exit_reasons_str;
 };
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 92fc0dab505..10e718db990 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2754,6 +2754,11 @@ static const struct trace_print_flags svm_exit_reasons_str[] = {
 	{ -1, NULL }
 };
 
+static bool svm_gb_page_enable(void)
+{
+	return true;
+}
+
 static struct kvm_x86_ops svm_x86_ops = {
 	.cpu_has_kvm_support = has_svm,
 	.disabled_by_bios = is_disabled,
@@ -2817,6 +2822,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.get_mt_mask = svm_get_mt_mask,
 
 	.exit_reasons_str = svm_exit_reasons_str,
+	.gb_page_enable = svm_gb_page_enable,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c5aaa1b5fdb..32e6d2031ba 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3908,6 +3908,11 @@ static const struct trace_print_flags vmx_exit_reasons_str[] = {
 	{ -1, NULL }
 };
 
+static bool vmx_gb_page_enable(void)
+{
+	return false;
+}
+
 static struct kvm_x86_ops vmx_x86_ops = {
 	.cpu_has_kvm_support = cpu_has_kvm_support,
 	.disabled_by_bios = vmx_disabled_by_bios,
@@ -3969,6 +3974,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.get_mt_mask = vmx_get_mt_mask,
 
 	.exit_reasons_str = vmx_exit_reasons_str,
+	.gb_page_enable = vmx_gb_page_enable,
 };
 
 static int __init vmx_init(void)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 69de7248083..fa525d511d9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1444,6 +1444,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			 u32 index, int *nent, int maxnent)
 {
 	unsigned f_nx = is_efer_nx() ? F(NX) : 0;
+	unsigned f_gbpages = kvm_x86_ops->gb_page_enable() ? F(GBPAGES) : 0;
 #ifdef CONFIG_X86_64
 	unsigned f_lm = F(LM);
 #else
@@ -1468,7 +1469,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
 		F(PAT) | F(PSE36) | 0 /* Reserved */ |
 		f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
-		F(FXSR) | F(FXSR_OPT) | 0 /* GBPAGES */ | 0 /* RDTSCP */ |
+		F(FXSR) | F(FXSR_OPT) | f_gbpages | 0 /* RDTSCP */ |
 		0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
 	/* cpuid 1.ecx */
 	const u32 kvm_supported_word4_x86_features =
-- 
cgit v1.2.3


From 95fb4eb6981216c07ac01f598e61b273b6eff58c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 29 Jul 2009 00:46:38 +0200
Subject: KVM: remove superfluous NULL pointer check in
 kvm_inject_pit_timer_irqs()

This takes care of the following entries from Dan's list:

arch/x86/kvm/i8254.c +714 kvm_inject_pit_timer_irqs(6) warning: variable derefenced in initializer 'vcpu'
arch/x86/kvm/i8254.c +714 kvm_inject_pit_timer_irqs(6) warning: variable derefenced before check 'vcpu'

Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 472653c15a2..82ad523b490 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -713,7 +713,7 @@ void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_kpit_state *ps;
 
-	if (vcpu && pit) {
+	if (pit) {
 		int inject = 0;
 		ps = &pit->pit_state;
 
-- 
cgit v1.2.3


From 3b80fffe2b31fb716d3ebe729c54464ee7856723 Mon Sep 17 00:00:00 2001
From: Izik Eidus <ieidus@redhat.com>
Date: Tue, 28 Jul 2009 15:26:58 -0300
Subject: KVM: MMU: make __kvm_mmu_free_some_pages handle empty list

First check if the list is empty before attempting to look at list
entries.

Cc: stable@kernel.org
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 1249c12e1d5..28be35c6ff1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2705,7 +2705,8 @@ EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
-	while (vcpu->kvm->arch.n_free_mmu_pages < KVM_REFILL_PAGES) {
+	while (vcpu->kvm->arch.n_free_mmu_pages < KVM_REFILL_PAGES &&
+	       !list_empty(&vcpu->kvm->arch.active_mmu_pages)) {
 		struct kvm_mmu_page *sp;
 
 		sp = container_of(vcpu->kvm->arch.active_mmu_pages.prev,
-- 
cgit v1.2.3


From b90c062c65cc8839edfac39778a37a55ca9bda36 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 28 Jul 2009 15:26:59 -0300
Subject: KVM: MMU: fix bogus alloc_mmu_pages assignment

Remove the bogus n_free_mmu_pages assignment from alloc_mmu_pages.

It breaks accounting of mmu pages, since n_free_mmu_pages is modified
but the real number of pages remains the same.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 28be35c6ff1..6f38178af92 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2786,14 +2786,6 @@ static int alloc_mmu_pages(struct kvm_vcpu *vcpu)
 
 	ASSERT(vcpu);
 
-	spin_lock(&vcpu->kvm->mmu_lock);
-	if (vcpu->kvm->arch.n_requested_mmu_pages)
-		vcpu->kvm->arch.n_free_mmu_pages =
-					vcpu->kvm->arch.n_requested_mmu_pages;
-	else
-		vcpu->kvm->arch.n_free_mmu_pages =
-					vcpu->kvm->arch.n_alloc_mmu_pages;
-	spin_unlock(&vcpu->kvm->mmu_lock);
 	/*
 	 * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
 	 * Therefore we need to allocate shadow page tables in the first
-- 
cgit v1.2.3


From 07708c4af1346ab1521b26a202f438366b7bcffd Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 3 Aug 2009 18:43:28 +0200
Subject: KVM: x86: Disallow hypercalls for guest callers in rings > 0

So far unprivileged guest callers running in ring 3 can issue, e.g., MMU
hypercalls. Normally, such callers cannot provide any hand-crafted MMU
command structure as it has to be passed by its physical address, but
they can still crash the guest kernel by passing random addresses.

To close the hole, this patch considers hypercalls valid only if issued
from guest ring 0. This may still be relaxed on a per-hypercall base in
the future once required.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fa525d511d9..92b5eddaa87 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3213,6 +3213,11 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 		a3 &= 0xFFFFFFFF;
 	}
 
+	if (kvm_x86_ops->get_cpl(vcpu) != 0) {
+		ret = -KVM_EPERM;
+		goto out;
+	}
+
 	switch (nr) {
 	case KVM_HC_VAPIC_POLL_IRQ:
 		ret = 0;
@@ -3224,6 +3229,7 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 		ret = -KVM_ENOSYS;
 		break;
 	}
+out:
 	kvm_register_write(vcpu, VCPU_REGS_RAX, ret);
 	++vcpu->stat.hypercalls;
 	return r;
-- 
cgit v1.2.3


From eab4b8aa34fc64e3a91358e1612e6d059396193b Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 4 Aug 2009 15:02:54 +0300
Subject: KVM: VMX: Optimize vmx_get_cpl()

Instead of calling vmx_get_segment() (which reads a whole bunch of
vmcs fields), read only the cs selector which contains the cpl.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 32e6d2031ba..0ba706e87c5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1773,16 +1773,13 @@ static void vmx_get_segment(struct kvm_vcpu *vcpu,
 
 static int vmx_get_cpl(struct kvm_vcpu *vcpu)
 {
-	struct kvm_segment kvm_seg;
-
 	if (!(vcpu->arch.cr0 & X86_CR0_PE)) /* if real mode */
 		return 0;
 
 	if (vmx_get_rflags(vcpu) & X86_EFLAGS_VM) /* if virtual 8086 */
 		return 3;
 
-	vmx_get_segment(vcpu, &kvm_seg, VCPU_SREG_CS);
-	return kvm_seg.selector & 3;
+	return vmcs_read16(GUEST_CS_SELECTOR) & 3;
 }
 
 static u32 vmx_segment_access_rights(struct kvm_segment *var)
-- 
cgit v1.2.3


From 1f3ee616dd21ff155f781c35509229bf2788c072 Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@redhat.com>
Date: Tue, 30 Jun 2009 16:24:28 +0530
Subject: KVM: ignore reads to perfctr msrs

We ignore writes to the perfctr msrs. Ignore reads as well.

Kaspersky antivirus crashes Windows guests if it can't read
these MSRs.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 92b5eddaa87..132c5100d4f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1048,9 +1048,12 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_K8_SYSCFG:
 	case MSR_K7_HWCR:
 	case MSR_VM_HSAVE_PA:
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
 	case MSR_K7_EVNTSEL0:
+	case MSR_K7_PERFCTR0:
 	case MSR_K8_INT_PENDING_MSG:
 	case MSR_AMD64_NB_CFG:
 	case MSR_FAM10H_MMIO_CONF_BASE:
-- 
cgit v1.2.3


From 3a34a8810b2ed316bfe58fa53640e8d30de3f6c2 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 4 Aug 2009 02:08:45 -0700
Subject: KVM: fix EFER read buffer overflow

Check whether index is within bounds before grabbing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 0ba706e87c5..31c3a8740c4 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -571,12 +571,15 @@ static void reload_tss(void)
 static void load_transition_efer(struct vcpu_vmx *vmx)
 {
 	int efer_offset = vmx->msr_offset_efer;
-	u64 host_efer = vmx->host_msrs[efer_offset].data;
-	u64 guest_efer = vmx->guest_msrs[efer_offset].data;
+	u64 host_efer;
+	u64 guest_efer;
 	u64 ignore_bits;
 
 	if (efer_offset < 0)
 		return;
+	host_efer = vmx->host_msrs[efer_offset].data;
+	guest_efer = vmx->guest_msrs[efer_offset].data;
+
 	/*
 	 * NX is emulated; LMA and LME handled by hardware; SCE meaninless
 	 * outside long mode
-- 
cgit v1.2.3


From 956f97cf665dc8c8ce2d5138bb38c022673b12d7 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 4 Aug 2009 15:30:27 +0300
Subject: KVM: Call kvm_vcpu_kick() inside pic spinlock

d5ecfdd25 moved it out because back than it was impossible to
call it inside spinlock. This restriction no longer exists.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 10 +---------
 arch/x86/kvm/irq.h   |  1 -
 2 files changed, 1 insertion(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index daf4606b029..d27320c8d46 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -43,11 +43,9 @@ static void pic_unlock(struct kvm_pic *s)
 {
 	struct kvm *kvm = s->kvm;
 	unsigned acks = s->pending_acks;
-	bool wakeup = s->wakeup_needed;
 	struct kvm_vcpu *vcpu;
 
 	s->pending_acks = 0;
-	s->wakeup_needed = false;
 
 	spin_unlock(&s->lock);
 
@@ -56,12 +54,6 @@ static void pic_unlock(struct kvm_pic *s)
 				     __ffs(acks));
 		acks &= acks - 1;
 	}
-
-	if (wakeup) {
-		vcpu = s->kvm->bsp_vcpu;
-		if (vcpu)
-			kvm_vcpu_kick(vcpu);
-	}
 }
 
 static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
@@ -527,7 +519,7 @@ static void pic_irq_request(void *opaque, int level)
 	s->output = level;
 	if (vcpu && level && (s->pics[0].isr_ack & (1 << irq))) {
 		s->pics[0].isr_ack &= ~(1 << irq);
-		s->wakeup_needed = true;
+		kvm_vcpu_kick(vcpu);
 	}
 }
 
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 9f593188129..7d6058a2fd3 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -63,7 +63,6 @@ struct kvm_kpic_state {
 
 struct kvm_pic {
 	spinlock_t lock;
-	bool wakeup_needed;
 	unsigned pending_acks;
 	struct kvm *kvm;
 	struct kvm_kpic_state pics[2]; /* 0 is master pic, 1 is slave pic */
-- 
cgit v1.2.3


From 938396a2341a4a96eaa5bea93a2bcdd69827c70c Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 4 Aug 2009 15:30:28 +0300
Subject: KVM: Call ack notifiers from PIC when guest OS acks an IRQ.

Currently they are called when irq vector is been delivered.  Calling ack
notifiers at this point is wrong.  Device assignment ack notifier enables
host interrupts, but guest not yet had a chance to clear interrupt
condition in a device.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index d27320c8d46..3aacd331e2d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -41,25 +41,16 @@ static void pic_lock(struct kvm_pic *s)
 static void pic_unlock(struct kvm_pic *s)
 	__releases(&s->lock)
 {
-	struct kvm *kvm = s->kvm;
-	unsigned acks = s->pending_acks;
-	struct kvm_vcpu *vcpu;
-
-	s->pending_acks = 0;
-
 	spin_unlock(&s->lock);
-
-	while (acks) {
-		kvm_notify_acked_irq(kvm, SELECT_PIC(__ffs(acks)),
-				     __ffs(acks));
-		acks &= acks - 1;
-	}
 }
 
 static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 {
 	s->isr &= ~(1 << irq);
 	s->isr_ack |= (1 << irq);
+	if (s != &s->pics_state->pics[0])
+		irq += 8;
+	kvm_notify_acked_irq(s->pics_state->kvm, SELECT_PIC(irq), irq);
 }
 
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
@@ -240,7 +231,6 @@ int kvm_pic_read_irq(struct kvm *kvm)
 	}
 	pic_update_irq(s);
 	pic_unlock(s);
-	kvm_notify_acked_irq(kvm, SELECT_PIC(irq), irq);
 
 	return intno;
 }
@@ -260,7 +250,7 @@ void kvm_pic_reset(struct kvm_kpic_state *s)
 		if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
 			if (s->irr & (1 << irq) || s->isr & (1 << irq)) {
 				n = irq + irqbase;
-				s->pics_state->pending_acks |= 1 << n;
+				kvm_notify_acked_irq(kvm, SELECT_PIC(n), n);
 			}
 	}
 	s->last_irr = 0;
-- 
cgit v1.2.3


From 88ba63c2653b9b4857148fedba47ba2d8a4652c9 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 4 Aug 2009 15:30:29 +0300
Subject: KVM: Replace pic_lock()/pic_unlock() with direct call to spinlock
 functions

They are not doing anything else now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 36 ++++++++++++------------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 3aacd331e2d..01f15168280 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -32,18 +32,6 @@
 #include <linux/kvm_host.h>
 #include "trace.h"
 
-static void pic_lock(struct kvm_pic *s)
-	__acquires(&s->lock)
-{
-	spin_lock(&s->lock);
-}
-
-static void pic_unlock(struct kvm_pic *s)
-	__releases(&s->lock)
-{
-	spin_unlock(&s->lock);
-}
-
 static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 {
 	s->isr &= ~(1 << irq);
@@ -56,10 +44,10 @@ static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
 {
 	struct kvm_pic *s = pic_irqchip(kvm);
-	pic_lock(s);
+	spin_lock(&s->lock);
 	s->pics[0].isr_ack = 0xff;
 	s->pics[1].isr_ack = 0xff;
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 }
 
 /*
@@ -160,9 +148,9 @@ static void pic_update_irq(struct kvm_pic *s)
 
 void kvm_pic_update_irq(struct kvm_pic *s)
 {
-	pic_lock(s);
+	spin_lock(&s->lock);
 	pic_update_irq(s);
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 }
 
 int kvm_pic_set_irq(void *opaque, int irq, int level)
@@ -170,14 +158,14 @@ int kvm_pic_set_irq(void *opaque, int irq, int level)
 	struct kvm_pic *s = opaque;
 	int ret = -1;
 
-	pic_lock(s);
+	spin_lock(&s->lock);
 	if (irq >= 0 && irq < PIC_NUM_PINS) {
 		ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
 		pic_update_irq(s);
 		trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
 				      s->pics[irq >> 3].imr, ret == 0);
 	}
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 
 	return ret;
 }
@@ -205,7 +193,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 	int irq, irq2, intno;
 	struct kvm_pic *s = pic_irqchip(kvm);
 
-	pic_lock(s);
+	spin_lock(&s->lock);
 	irq = pic_get_irq(&s->pics[0]);
 	if (irq >= 0) {
 		pic_intack(&s->pics[0], irq);
@@ -230,7 +218,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 		intno = s->pics[0].irq_base + irq;
 	}
 	pic_update_irq(s);
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 
 	return intno;
 }
@@ -448,7 +436,7 @@ static int picdev_write(struct kvm_io_device *this,
 			printk(KERN_ERR "PIC: non byte write\n");
 		return 0;
 	}
-	pic_lock(s);
+	spin_lock(&s->lock);
 	switch (addr) {
 	case 0x20:
 	case 0x21:
@@ -461,7 +449,7 @@ static int picdev_write(struct kvm_io_device *this,
 		elcr_ioport_write(&s->pics[addr & 1], addr, data);
 		break;
 	}
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 	return 0;
 }
 
@@ -478,7 +466,7 @@ static int picdev_read(struct kvm_io_device *this,
 			printk(KERN_ERR "PIC: non byte read\n");
 		return 0;
 	}
-	pic_lock(s);
+	spin_lock(&s->lock);
 	switch (addr) {
 	case 0x20:
 	case 0x21:
@@ -492,7 +480,7 @@ static int picdev_read(struct kvm_io_device *this,
 		break;
 	}
 	*(unsigned char *)val = data;
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 256cd2ef4f5c125f5df2c81d8457f080a4684ae6 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 10 Aug 2009 10:41:27 +0300
Subject: x86: Export kmap_atomic_to_page()

Needed by KVM.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/mm/highmem_32.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 2112ed55e7e..572f47c1c73 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -104,6 +104,7 @@ EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
 EXPORT_SYMBOL(kmap_atomic_prot);
+EXPORT_SYMBOL(kmap_atomic_to_page);
 
 void __init set_highmem_pages_init(void)
 {
-- 
cgit v1.2.3


From 2af9194d1b683f91ae956afff9afb0b52a241371 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:28 +0200
Subject: KVM: SVM: add helper functions for global interrupt flag

This patch makes the code easier to read when it comes to setting,
clearing and checking the status of the virtualized global
interrupt flag for the VCPU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 10e718db990..9f7277273a2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -129,6 +129,21 @@ static inline bool is_nested(struct vcpu_svm *svm)
 	return svm->nested_vmcb;
 }
 
+static inline void enable_gif(struct vcpu_svm *svm)
+{
+	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+}
+
+static inline void disable_gif(struct vcpu_svm *svm)
+{
+	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+}
+
+static inline bool gif_set(struct vcpu_svm *svm)
+{
+	return !!(svm->vcpu.arch.hflags & HF_GIF_MASK);
+}
+
 static unsigned long iopm_base;
 
 struct kvm_ldttss_desc {
@@ -621,7 +636,9 @@ static void init_vmcb(struct vcpu_svm *svm)
 	force_new_asid(&svm->vcpu);
 
 	svm->nested_vmcb = 0;
-	svm->vcpu.arch.hflags = HF_GIF_MASK;
+	svm->vcpu.arch.hflags = 0;
+
+	enable_gif(svm);
 }
 
 static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
@@ -1629,7 +1646,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->save.cpl = 0;
 	svm->vmcb->control.exit_int_info = 0;
 
-	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+	disable_gif(svm);
 	/* Exit nested SVM mode */
 	svm->nested_vmcb = 0;
 
@@ -1761,7 +1778,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
 	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
 
-	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+	enable_gif(svm);
 
 	return 0;
 }
@@ -1850,7 +1867,7 @@ static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+	enable_gif(svm);
 
 	return 1;
 }
@@ -1863,7 +1880,7 @@ static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+	disable_gif(svm);
 
 	/* After a CLGI no interrupts should come */
 	svm_clear_vintr(svm);
@@ -2352,7 +2369,7 @@ static void svm_set_irq(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	BUG_ON(!(svm->vcpu.arch.hflags & HF_GIF_MASK));
+	BUG_ON(!(gif_set(svm)));
 
 	svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
 		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
@@ -2383,7 +2400,7 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 	struct vmcb *vmcb = svm->vmcb;
 	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
 		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		(svm->vcpu.arch.hflags & HF_GIF_MASK) &&
+		gif_set(svm) &&
 		!is_nested(svm);
 }
 
@@ -2398,7 +2415,7 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 	 * GIF becomes 1, because that's a separate STGI/VMRUN intercept.
 	 * The next time we get that intercept, this function will be
 	 * called again though and we'll get the vintr intercept. */
-	if (svm->vcpu.arch.hflags & HF_GIF_MASK) {
+	if (gif_set(svm)) {
 		svm_set_vintr(svm);
 		svm_inject_irq(svm, 0x0);
 	}
-- 
cgit v1.2.3


From 33740e4009b7d287538f68f614eb3542df3597e4 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:29 +0200
Subject: KVM: SVM: optimize nested #vmexit

It is more efficient to copy only the relevant parts of the vmcb back to
the nested vmcb when we emulate an vmexit.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 68 ++++++++++++++++++++++++++----------------------------
 1 file changed, 33 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 9f7277273a2..2f5f2236f2a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1572,53 +1572,52 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
 	struct vmcb *hsave = svm->hsave;
-	u64 nested_save[] = { nested_vmcb->save.cr0,
-			      nested_vmcb->save.cr3,
-			      nested_vmcb->save.cr4,
-			      nested_vmcb->save.efer,
-			      nested_vmcb->control.intercept_cr_read,
-			      nested_vmcb->control.intercept_cr_write,
-			      nested_vmcb->control.intercept_dr_read,
-			      nested_vmcb->control.intercept_dr_write,
-			      nested_vmcb->control.intercept_exceptions,
-			      nested_vmcb->control.intercept,
-			      nested_vmcb->control.msrpm_base_pa,
-			      nested_vmcb->control.iopm_base_pa,
-			      nested_vmcb->control.tsc_offset };
+	struct vmcb *vmcb = svm->vmcb;
 
 	/* Give the current vmcb to the guest */
-	memcpy(nested_vmcb, svm->vmcb, sizeof(struct vmcb));
-	nested_vmcb->save.cr0 = nested_save[0];
-	if (!npt_enabled)
-		nested_vmcb->save.cr3 = nested_save[1];
-	nested_vmcb->save.cr4 = nested_save[2];
-	nested_vmcb->save.efer = nested_save[3];
-	nested_vmcb->control.intercept_cr_read = nested_save[4];
-	nested_vmcb->control.intercept_cr_write = nested_save[5];
-	nested_vmcb->control.intercept_dr_read = nested_save[6];
-	nested_vmcb->control.intercept_dr_write = nested_save[7];
-	nested_vmcb->control.intercept_exceptions = nested_save[8];
-	nested_vmcb->control.intercept = nested_save[9];
-	nested_vmcb->control.msrpm_base_pa = nested_save[10];
-	nested_vmcb->control.iopm_base_pa = nested_save[11];
-	nested_vmcb->control.tsc_offset = nested_save[12];
+	disable_gif(svm);
+
+	nested_vmcb->save.es     = vmcb->save.es;
+	nested_vmcb->save.cs     = vmcb->save.cs;
+	nested_vmcb->save.ss     = vmcb->save.ss;
+	nested_vmcb->save.ds     = vmcb->save.ds;
+	nested_vmcb->save.gdtr   = vmcb->save.gdtr;
+	nested_vmcb->save.idtr   = vmcb->save.idtr;
+	if (npt_enabled)
+		nested_vmcb->save.cr3    = vmcb->save.cr3;
+	nested_vmcb->save.cr2    = vmcb->save.cr2;
+	nested_vmcb->save.rflags = vmcb->save.rflags;
+	nested_vmcb->save.rip    = vmcb->save.rip;
+	nested_vmcb->save.rsp    = vmcb->save.rsp;
+	nested_vmcb->save.rax    = vmcb->save.rax;
+	nested_vmcb->save.dr7    = vmcb->save.dr7;
+	nested_vmcb->save.dr6    = vmcb->save.dr6;
+	nested_vmcb->save.cpl    = vmcb->save.cpl;
+
+	nested_vmcb->control.int_ctl           = vmcb->control.int_ctl;
+	nested_vmcb->control.int_vector        = vmcb->control.int_vector;
+	nested_vmcb->control.int_state         = vmcb->control.int_state;
+	nested_vmcb->control.exit_code         = vmcb->control.exit_code;
+	nested_vmcb->control.exit_code_hi      = vmcb->control.exit_code_hi;
+	nested_vmcb->control.exit_info_1       = vmcb->control.exit_info_1;
+	nested_vmcb->control.exit_info_2       = vmcb->control.exit_info_2;
+	nested_vmcb->control.exit_int_info     = vmcb->control.exit_int_info;
+	nested_vmcb->control.exit_int_info_err = vmcb->control.exit_int_info_err;
+	nested_vmcb->control.tlb_ctl           = 0;
+	nested_vmcb->control.event_inj         = 0;
+	nested_vmcb->control.event_inj_err     = 0;
 
 	/* We always set V_INTR_MASKING and remember the old value in hflags */
 	if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
 		nested_vmcb->control.int_ctl &= ~V_INTR_MASKING_MASK;
 
-	if ((nested_vmcb->control.int_ctl & V_IRQ_MASK) &&
-	    (nested_vmcb->control.int_vector)) {
-		nsvm_printk("WARNING: IRQ 0x%x still enabled on #VMEXIT\n",
-				nested_vmcb->control.int_vector);
-	}
-
 	/* Restore the original control entries */
 	svm->vmcb->control = hsave->control;
 
 	/* Kill any pending exceptions */
 	if (svm->vcpu.arch.exception.pending == true)
 		nsvm_printk("WARNING: Pending Exception\n");
+
 	kvm_clear_exception_queue(&svm->vcpu);
 	kvm_clear_interrupt_queue(&svm->vcpu);
 
@@ -1646,7 +1645,6 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->save.cpl = 0;
 	svm->vmcb->control.exit_int_info = 0;
 
-	disable_gif(svm);
 	/* Exit nested SVM mode */
 	svm->nested_vmcb = 0;
 
-- 
cgit v1.2.3


From defbba5660fb9fcad186bd799a635e52994a4d1a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:30 +0200
Subject: KVM: SVM: optimize nested vmrun

Only copy the necessary parts of the vmcb save area on vmrun and save
precious time.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 2f5f2236f2a..f11f88005c2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1681,6 +1681,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
 	struct vmcb *hsave = svm->hsave;
+	struct vmcb *vmcb = svm->vmcb;
 
 	/* nested_vmcb is our indicator if nested SVM is activated */
 	svm->nested_vmcb = svm->vmcb->save.rax;
@@ -1691,12 +1692,25 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 
 	/* Save the old vmcb, so we don't need to pick what we save, but
 	   can restore everything when a VMEXIT occurs */
-	memcpy(hsave, svm->vmcb, sizeof(struct vmcb));
-	/* We need to remember the original CR3 in the SPT case */
-	if (!npt_enabled)
-		hsave->save.cr3 = svm->vcpu.arch.cr3;
-	hsave->save.cr4 = svm->vcpu.arch.cr4;
-	hsave->save.rip = svm->next_rip;
+	hsave->save.es     = vmcb->save.es;
+	hsave->save.cs     = vmcb->save.cs;
+	hsave->save.ss     = vmcb->save.ss;
+	hsave->save.ds     = vmcb->save.ds;
+	hsave->save.gdtr   = vmcb->save.gdtr;
+	hsave->save.idtr   = vmcb->save.idtr;
+	hsave->save.efer   = svm->vcpu.arch.shadow_efer;
+	hsave->save.cr0    = svm->vcpu.arch.cr0;
+	hsave->save.cr4    = svm->vcpu.arch.cr4;
+	hsave->save.rflags = vmcb->save.rflags;
+	hsave->save.rip    = svm->next_rip;
+	hsave->save.rsp    = vmcb->save.rsp;
+	hsave->save.rax    = vmcb->save.rax;
+	if (npt_enabled)
+		hsave->save.cr3    = vmcb->save.cr3;
+	else
+		hsave->save.cr3    = svm->vcpu.arch.cr3;
+
+	hsave->control = vmcb->control;
 
 	if (svm->vmcb->save.rflags & X86_EFLAGS_IF)
 		svm->vcpu.arch.hflags |= HF_HIF_MASK;
@@ -1721,7 +1735,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 		kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
 		kvm_mmu_reset_context(&svm->vcpu);
 	}
-	svm->vmcb->save.cr2 = nested_vmcb->save.cr2;
+	svm->vmcb->save.cr2 = svm->vcpu.arch.cr2 = nested_vmcb->save.cr2;
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RAX, nested_vmcb->save.rax);
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RSP, nested_vmcb->save.rsp);
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RIP, nested_vmcb->save.rip);
-- 
cgit v1.2.3


From 0460a979b4b7a564e59eaa8efbba6f5ae38c5b78 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:31 +0200
Subject: KVM: SVM: copy only necessary parts of the control area on
 vmrun/vmexit

The vmcb control area contains more then 800 bytes of reserved fields
which are unnecessarily copied. Fix this by introducing a copy
function which only copies the relevant part and saves time.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index f11f88005c2..df795bcebd2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1567,6 +1567,38 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 			     nested_svm_exit_handled_real);
 }
 
+static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *from_vmcb)
+{
+	struct vmcb_control_area *dst  = &dst_vmcb->control;
+	struct vmcb_control_area *from = &from_vmcb->control;
+
+	dst->intercept_cr_read    = from->intercept_cr_read;
+	dst->intercept_cr_write   = from->intercept_cr_write;
+	dst->intercept_dr_read    = from->intercept_dr_read;
+	dst->intercept_dr_write   = from->intercept_dr_write;
+	dst->intercept_exceptions = from->intercept_exceptions;
+	dst->intercept            = from->intercept;
+	dst->iopm_base_pa         = from->iopm_base_pa;
+	dst->msrpm_base_pa        = from->msrpm_base_pa;
+	dst->tsc_offset           = from->tsc_offset;
+	dst->asid                 = from->asid;
+	dst->tlb_ctl              = from->tlb_ctl;
+	dst->int_ctl              = from->int_ctl;
+	dst->int_vector           = from->int_vector;
+	dst->int_state            = from->int_state;
+	dst->exit_code            = from->exit_code;
+	dst->exit_code_hi         = from->exit_code_hi;
+	dst->exit_info_1          = from->exit_info_1;
+	dst->exit_info_2          = from->exit_info_2;
+	dst->exit_int_info        = from->exit_int_info;
+	dst->exit_int_info_err    = from->exit_int_info_err;
+	dst->nested_ctl           = from->nested_ctl;
+	dst->event_inj            = from->event_inj;
+	dst->event_inj_err        = from->event_inj_err;
+	dst->nested_cr3           = from->nested_cr3;
+	dst->lbr_ctl              = from->lbr_ctl;
+}
+
 static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 				  void *arg2, void *opaque)
 {
@@ -1612,7 +1644,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 		nested_vmcb->control.int_ctl &= ~V_INTR_MASKING_MASK;
 
 	/* Restore the original control entries */
-	svm->vmcb->control = hsave->control;
+	copy_vmcb_control_area(vmcb, hsave);
 
 	/* Kill any pending exceptions */
 	if (svm->vcpu.arch.exception.pending == true)
@@ -1710,7 +1742,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	else
 		hsave->save.cr3    = svm->vcpu.arch.cr3;
 
-	hsave->control = vmcb->control;
+	copy_vmcb_control_area(hsave, vmcb);
 
 	if (svm->vmcb->save.rflags & X86_EFLAGS_IF)
 		svm->vcpu.arch.hflags |= HF_HIF_MASK;
-- 
cgit v1.2.3


From a5c3832dfe6324862b4fd1d90831266b15d4b58e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:32 +0200
Subject: KVM: SVM: complete interrupts after handling nested exits

The interrupt completion code must run after nested exits are handled
because not injected interrupts or exceptions may be handled by the l1
guest first.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index df795bcebd2..825b82540f0 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -111,6 +111,7 @@ static int nested = 0;
 module_param(nested, int, S_IRUGO);
 
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
+static void svm_complete_interrupts(struct vcpu_svm *svm);
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
@@ -2324,6 +2325,8 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		}
 	}
 
+	svm_complete_interrupts(svm);
+
 	if (npt_enabled) {
 		int mmu_reload = 0;
 		if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -2690,8 +2693,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
 		vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
 	}
-
-	svm_complete_interrupts(svm);
 }
 
 #undef R
-- 
cgit v1.2.3


From e6aa9abd7381557c67be6a9e7240eb132ca00d66 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:33 +0200
Subject: KVM: SVM: move nested svm state into seperate struct

This makes it more clear for which purpose these members in the vcpu_svm
exist.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 62 +++++++++++++++++++++++++++++-------------------------
 1 file changed, 33 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 825b82540f0..fbadaa7cb27 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -70,6 +70,18 @@ static const u32 host_save_user_msrs[] = {
 
 struct kvm_vcpu;
 
+struct nested_state {
+	struct vmcb *hsave;
+	u64 hsave_msr;
+	u64 vmcb;
+
+	/* These are the merged vectors */
+	u32 *msrpm;
+
+	/* gpa pointers to the real vectors */
+	u64 vmcb_msrpm;
+};
+
 struct vcpu_svm {
 	struct kvm_vcpu vcpu;
 	struct vmcb *vmcb;
@@ -85,16 +97,8 @@ struct vcpu_svm {
 	u64 host_gs_base;
 
 	u32 *msrpm;
-	struct vmcb *hsave;
-	u64 hsave_msr;
-
-	u64 nested_vmcb;
 
-	/* These are the merged vectors */
-	u32 *nested_msrpm;
-
-	/* gpa pointers to the real vectors */
-	u64 nested_vmcb_msrpm;
+	struct nested_state nested;
 };
 
 /* enable NPT for AMD64 and X86 with PAE */
@@ -127,7 +131,7 @@ static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 
 static inline bool is_nested(struct vcpu_svm *svm)
 {
-	return svm->nested_vmcb;
+	return svm->nested.vmcb;
 }
 
 static inline void enable_gif(struct vcpu_svm *svm)
@@ -636,7 +640,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 	}
 	force_new_asid(&svm->vcpu);
 
-	svm->nested_vmcb = 0;
+	svm->nested.vmcb = 0;
 	svm->vcpu.arch.hflags = 0;
 
 	enable_gif(svm);
@@ -699,9 +703,9 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	hsave_page = alloc_page(GFP_KERNEL);
 	if (!hsave_page)
 		goto uninit;
-	svm->hsave = page_address(hsave_page);
+	svm->nested.hsave = page_address(hsave_page);
 
-	svm->nested_msrpm = page_address(nested_msrpm_pages);
+	svm->nested.msrpm = page_address(nested_msrpm_pages);
 
 	svm->vmcb = page_address(page);
 	clear_page(svm->vmcb);
@@ -731,8 +735,8 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu)
 
 	__free_page(pfn_to_page(svm->vmcb_pa >> PAGE_SHIFT));
 	__free_pages(virt_to_page(svm->msrpm), MSRPM_ALLOC_ORDER);
-	__free_page(virt_to_page(svm->hsave));
-	__free_pages(virt_to_page(svm->nested_msrpm), MSRPM_ALLOC_ORDER);
+	__free_page(virt_to_page(svm->nested.hsave));
+	__free_pages(virt_to_page(svm->nested.msrpm), MSRPM_ALLOC_ORDER);
 	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, svm);
 }
@@ -1558,13 +1562,13 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 
 	switch (svm->vmcb->control.exit_code) {
 	case SVM_EXIT_MSR:
-		return nested_svm_do(svm, svm->nested_vmcb,
-				     svm->nested_vmcb_msrpm, NULL,
+		return nested_svm_do(svm, svm->nested.vmcb,
+				     svm->nested.vmcb_msrpm, NULL,
 				     nested_svm_exit_handled_msr);
 	default: break;
 	}
 
-	return nested_svm_do(svm, svm->nested_vmcb, 0, &k,
+	return nested_svm_do(svm, svm->nested.vmcb, 0, &k,
 			     nested_svm_exit_handled_real);
 }
 
@@ -1604,7 +1608,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 				  void *arg2, void *opaque)
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	struct vmcb *hsave = svm->hsave;
+	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
 	/* Give the current vmcb to the guest */
@@ -1679,7 +1683,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->control.exit_int_info = 0;
 
 	/* Exit nested SVM mode */
-	svm->nested_vmcb = 0;
+	svm->nested.vmcb = 0;
 
 	return 0;
 }
@@ -1687,7 +1691,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 static int nested_svm_vmexit(struct vcpu_svm *svm)
 {
 	nsvm_printk("VMexit\n");
-	if (nested_svm_do(svm, svm->nested_vmcb, 0,
+	if (nested_svm_do(svm, svm->nested.vmcb, 0,
 			  NULL, nested_svm_vmexit_real))
 		return 1;
 
@@ -1703,8 +1707,8 @@ static int nested_svm_vmrun_msrpm(struct vcpu_svm *svm, void *arg1,
 	int i;
 	u32 *nested_msrpm = (u32*)arg1;
 	for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
-		svm->nested_msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
-	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested_msrpm);
+		svm->nested.msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
+	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested.msrpm);
 
 	return 0;
 }
@@ -1713,11 +1717,11 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 			    void *arg2, void *opaque)
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	struct vmcb *hsave = svm->hsave;
+	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
 	/* nested_vmcb is our indicator if nested SVM is activated */
-	svm->nested_vmcb = svm->vmcb->save.rax;
+	svm->nested.vmcb = svm->vmcb->save.rax;
 
 	/* Clear internal status */
 	kvm_clear_exception_queue(&svm->vcpu);
@@ -1795,7 +1799,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 
 	svm->vmcb->control.intercept |= nested_vmcb->control.intercept;
 
-	svm->nested_vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
+	svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
 
 	force_new_asid(&svm->vcpu);
 	svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
@@ -1897,7 +1901,7 @@ static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 			  NULL, nested_svm_vmrun))
 		return 1;
 
-	if (nested_svm_do(svm, svm->nested_vmcb_msrpm, 0,
+	if (nested_svm_do(svm, svm->nested.vmcb_msrpm, 0,
 		      NULL, nested_svm_vmrun_msrpm))
 		return 1;
 
@@ -2107,7 +2111,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 		*data = svm->vmcb->save.last_excp_to;
 		break;
 	case MSR_VM_HSAVE_PA:
-		*data = svm->hsave_msr;
+		*data = svm->nested.hsave_msr;
 		break;
 	case MSR_VM_CR:
 		*data = 0;
@@ -2195,7 +2199,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 			svm_disable_lbrv(svm);
 		break;
 	case MSR_VM_HSAVE_PA:
-		svm->hsave_msr = data;
+		svm->nested.hsave_msr = data;
 		break;
 	case MSR_VM_CR:
 	case MSR_VM_IGNNE:
-- 
cgit v1.2.3


From aad42c641cfcda4f87abc4f6588329b9b3cc3364 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:34 +0200
Subject: KVM: SVM: cache nested intercepts

When the nested intercepts are cached we don't need to call
get_user_pages and/or map the nested vmcb on every nested #vmexit to
check who will handle the intercept.
Further this patch aligns the emulated svm behavior better to real
hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index fbadaa7cb27..4426c631057 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -80,6 +80,15 @@ struct nested_state {
 
 	/* gpa pointers to the real vectors */
 	u64 vmcb_msrpm;
+
+	/* cache for intercepts of the guest */
+	u16 intercept_cr_read;
+	u16 intercept_cr_write;
+	u16 intercept_dr_read;
+	u16 intercept_dr_write;
+	u32 intercept_exceptions;
+	u64 intercept;
+
 };
 
 struct vcpu_svm {
@@ -1452,7 +1461,6 @@ static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
 					void *arg2,
 					void *opaque)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
 	bool kvm_overrides = *(bool *)opaque;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
@@ -1479,38 +1487,38 @@ static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
 	switch (exit_code) {
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
-		if (nested_vmcb->control.intercept_cr_read & cr_bits)
+		if (svm->nested.intercept_cr_read & cr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
-		if (nested_vmcb->control.intercept_cr_write & cr_bits)
+		if (svm->nested.intercept_cr_write & cr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
-		if (nested_vmcb->control.intercept_dr_read & dr_bits)
+		if (svm->nested.intercept_dr_read & dr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
-		if (nested_vmcb->control.intercept_dr_write & dr_bits)
+		if (svm->nested.intercept_dr_write & dr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
 		u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
-		if (nested_vmcb->control.intercept_exceptions & excp_bits)
+		if (svm->nested.intercept_exceptions & excp_bits)
 			return 1;
 		break;
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
 		nsvm_printk("exit code: 0x%x\n", exit_code);
-		if (nested_vmcb->control.intercept & exit_bits)
+		if (svm->nested.intercept & exit_bits)
 			return 1;
 	}
 	}
@@ -1801,6 +1809,14 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 
 	svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
 
+	/* cache intercepts */
+	svm->nested.intercept_cr_read    = nested_vmcb->control.intercept_cr_read;
+	svm->nested.intercept_cr_write   = nested_vmcb->control.intercept_cr_write;
+	svm->nested.intercept_dr_read    = nested_vmcb->control.intercept_dr_read;
+	svm->nested.intercept_dr_write   = nested_vmcb->control.intercept_dr_write;
+	svm->nested.intercept_exceptions = nested_vmcb->control.intercept_exceptions;
+	svm->nested.intercept            = nested_vmcb->control.intercept;
+
 	force_new_asid(&svm->vcpu);
 	svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
 	svm->vmcb->control.exit_int_info_err = nested_vmcb->control.exit_int_info_err;
-- 
cgit v1.2.3


From 4c2161aed55c294c4c42622455f067a4b3077b85 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:35 +0200
Subject: KVM: SVM: consolidate nested_svm_exit_handled

When caching guest intercepts there is no need anymore for the
nested_svm_exit_handled_real function. So move its code into
nested_svm_exit_handled.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 109 ++++++++++++++++++++++++-----------------------------
 1 file changed, 49 insertions(+), 60 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 4426c631057..bdd73fd9a75 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1456,15 +1456,58 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
-static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
-					void *arg1,
-					void *arg2,
-					void *opaque)
+static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
+				       void *arg1, void *arg2,
+				       void *opaque)
+{
+	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	u8 *msrpm = (u8 *)arg2;
+	u32 t0, t1;
+	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
+	u32 param = svm->vmcb->control.exit_info_1 & 1;
+
+	if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
+		return 0;
+
+	switch (msr) {
+	case 0 ... 0x1fff:
+		t0 = (msr * 2) % 8;
+		t1 = msr / 8;
+		break;
+	case 0xc0000000 ... 0xc0001fff:
+		t0 = (8192 + msr - 0xc0000000) * 2;
+		t1 = (t0 / 8);
+		t0 %= 8;
+		break;
+	case 0xc0010000 ... 0xc0011fff:
+		t0 = (16384 + msr - 0xc0010000) * 2;
+		t1 = (t0 / 8);
+		t0 %= 8;
+		break;
+	default:
+		return 1;
+		break;
+	}
+	if (msrpm[t1] & ((1 << param) << t0))
+		return 1;
+
+	return 0;
+}
+
+static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 {
-	bool kvm_overrides = *(bool *)opaque;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
-	if (kvm_overrides) {
+	switch (svm->vmcb->control.exit_code) {
+	case SVM_EXIT_MSR:
+		return nested_svm_do(svm, svm->nested.vmcb,
+				     svm->nested.vmcb_msrpm, NULL,
+				     nested_svm_exit_handled_msr);
+	default:
+		break;
+	}
+
+	if (kvm_override) {
 		switch (exit_code) {
 		case SVM_EXIT_INTR:
 		case SVM_EXIT_NMI:
@@ -1526,60 +1569,6 @@ static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
 	return 0;
 }
 
-static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
-				       void *arg1, void *arg2,
-				       void *opaque)
-{
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	u8 *msrpm = (u8 *)arg2;
-        u32 t0, t1;
-	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
-	u32 param = svm->vmcb->control.exit_info_1 & 1;
-
-	if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
-		return 0;
-
-	switch(msr) {
-	case 0 ... 0x1fff:
-		t0 = (msr * 2) % 8;
-		t1 = msr / 8;
-		break;
-	case 0xc0000000 ... 0xc0001fff:
-		t0 = (8192 + msr - 0xc0000000) * 2;
-		t1 = (t0 / 8);
-		t0 %= 8;
-		break;
-	case 0xc0010000 ... 0xc0011fff:
-		t0 = (16384 + msr - 0xc0010000) * 2;
-		t1 = (t0 / 8);
-		t0 %= 8;
-		break;
-	default:
-		return 1;
-		break;
-	}
-	if (msrpm[t1] & ((1 << param) << t0))
-		return 1;
-
-	return 0;
-}
-
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
-{
-	bool k = kvm_override;
-
-	switch (svm->vmcb->control.exit_code) {
-	case SVM_EXIT_MSR:
-		return nested_svm_do(svm, svm->nested.vmcb,
-				     svm->nested.vmcb_msrpm, NULL,
-				     nested_svm_exit_handled_msr);
-	default: break;
-	}
-
-	return nested_svm_do(svm, svm->nested.vmcb, 0, &k,
-			     nested_svm_exit_handled_real);
-}
-
 static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *from_vmcb)
 {
 	struct vmcb_control_area *dst  = &dst_vmcb->control;
-- 
cgit v1.2.3


From 9c4e40b9949868928bd7fec67a4b0902d90e57ed Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:36 +0200
Subject: KVM: SVM: do nested vmexit in nested_svm_exit_handled

If this function returns true a nested vmexit is required. Move that
vmexit into the nested_svm_exit_handled function. This also simplifies
the handling of nested #pf intercepts in this function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 42 +++++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index bdd73fd9a75..3bb6d4b92b3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1366,8 +1366,6 @@ static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 		svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
 		if (nested_svm_exit_handled(svm, false)) {
 			nsvm_printk("VMexit -> EXCP 0x%x\n", nr);
-
-			nested_svm_vmexit(svm);
 			return 1;
 		}
 	}
@@ -1388,7 +1386,6 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 
 		if (nested_svm_exit_handled(svm, false)) {
 			nsvm_printk("VMexit -> INTR\n");
-			nested_svm_vmexit(svm);
 			return 1;
 		}
 	}
@@ -1497,15 +1494,7 @@ static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 {
 	u32 exit_code = svm->vmcb->control.exit_code;
-
-	switch (svm->vmcb->control.exit_code) {
-	case SVM_EXIT_MSR:
-		return nested_svm_do(svm, svm->nested.vmcb,
-				     svm->nested.vmcb_msrpm, NULL,
-				     nested_svm_exit_handled_msr);
-	default:
-		break;
-	}
+	bool vmexit = false;
 
 	if (kvm_override) {
 		switch (exit_code) {
@@ -1528,45 +1517,55 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 	}
 
 	switch (exit_code) {
+	case SVM_EXIT_MSR:
+		if (nested_svm_do(svm, svm->nested.vmcb, svm->nested.vmcb_msrpm,
+				  NULL, nested_svm_exit_handled_msr))
+			vmexit = true;
+		break;
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
 		if (svm->nested.intercept_cr_read & cr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
 		if (svm->nested.intercept_cr_write & cr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
 		if (svm->nested.intercept_dr_read & dr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
 		if (svm->nested.intercept_dr_write & dr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
 		u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
 		if (svm->nested.intercept_exceptions & excp_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
 		nsvm_printk("exit code: 0x%x\n", exit_code);
 		if (svm->nested.intercept & exit_bits)
-			return 1;
+			vmexit = true;
 	}
 	}
 
-	return 0;
+	if (vmexit) {
+		nsvm_printk("#VMEXIT reason=%04x\n", exit_code);
+		nested_svm_vmexit(svm);
+	}
+
+	return vmexit;
 }
 
 static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *from_vmcb)
@@ -2327,11 +2326,8 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
 			    exit_code, svm->vmcb->control.exit_info_1,
 			    svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
-		if (nested_svm_exit_handled(svm, true)) {
-			nested_svm_vmexit(svm);
-			nsvm_printk("-> #VMEXIT\n");
+		if (nested_svm_exit_handled(svm, true))
 			return 1;
-		}
 	}
 
 	svm_complete_interrupts(svm);
-- 
cgit v1.2.3


From 0295ad7de86a6347316bc7414c1b9c15f56a1333 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:37 +0200
Subject: KVM: SVM: simplify nested_svm_check_exception

Makes the code of this function more readable by removing on
indentation level for the core logic.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 3bb6d4b92b3..67fad6641d5 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1359,18 +1359,15 @@ static int nested_svm_check_permissions(struct vcpu_svm *svm)
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code)
 {
-	if (is_nested(svm)) {
-		svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
-		svm->vmcb->control.exit_code_hi = 0;
-		svm->vmcb->control.exit_info_1 = error_code;
-		svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
-		if (nested_svm_exit_handled(svm, false)) {
-			nsvm_printk("VMexit -> EXCP 0x%x\n", nr);
-			return 1;
-		}
-	}
+	if (!is_nested(svm))
+		return 0;
 
-	return 0;
+	svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
+	svm->vmcb->control.exit_code_hi = 0;
+	svm->vmcb->control.exit_info_1 = error_code;
+	svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
+
+	return nested_svm_exit_handled(svm, false);
 }
 
 static inline int nested_svm_intr(struct vcpu_svm *svm)
-- 
cgit v1.2.3


From 34f80cfad59ee587e374cbaf5f2a31d9f5015404 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:38 +0200
Subject: KVM: SVM: get rid of nested_svm_vmexit_real

This patch is the starting point of removing nested_svm_do from the
nested svm code. The nested_svm_do function basically maps two guest
physical pages to host virtual addresses and calls a passed function
on it. This function pointer code flow is hard to read and not the
best technical solution here.
As a side effect this patch indroduces the nested_svm_[un]map helper
functions.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 52 ++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 67fad6641d5..5e55a1bdd13 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1390,6 +1390,39 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 	return 0;
 }
 
+static void *nested_svm_map(struct vcpu_svm *svm, u64 gpa, enum km_type idx)
+{
+	struct page *page;
+
+	down_read(&current->mm->mmap_sem);
+	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
+	up_read(&current->mm->mmap_sem);
+
+	if (is_error_page(page))
+		goto error;
+
+	return kmap_atomic(page, idx);
+
+error:
+	kvm_release_page_clean(page);
+	kvm_inject_gp(&svm->vcpu, 0);
+
+	return NULL;
+}
+
+static void nested_svm_unmap(void *addr, enum km_type idx)
+{
+	struct page *page;
+
+	if (!addr)
+		return;
+
+	page = kmap_atomic_to_page(addr);
+
+	kunmap_atomic(addr, idx);
+	kvm_release_page_dirty(page);
+}
+
 static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
 {
 	struct page *page;
@@ -1597,13 +1630,16 @@ static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *fr
 	dst->lbr_ctl              = from->lbr_ctl;
 }
 
-static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
-				  void *arg2, void *opaque)
+static int nested_svm_vmexit(struct vcpu_svm *svm)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	struct vmcb *nested_vmcb;
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
+	nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, KM_USER0);
+	if (!nested_vmcb)
+		return 1;
+
 	/* Give the current vmcb to the guest */
 	disable_gif(svm);
 
@@ -1678,15 +1714,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	/* Exit nested SVM mode */
 	svm->nested.vmcb = 0;
 
-	return 0;
-}
-
-static int nested_svm_vmexit(struct vcpu_svm *svm)
-{
-	nsvm_printk("VMexit\n");
-	if (nested_svm_do(svm, svm->nested.vmcb, 0,
-			  NULL, nested_svm_vmexit_real))
-		return 1;
+	nested_svm_unmap(nested_vmcb, KM_USER0);
 
 	kvm_mmu_reset_context(&svm->vcpu);
 	kvm_mmu_load(&svm->vcpu);
-- 
cgit v1.2.3


From 3d62d9aa9868865217ce3a1b70d6039a98b50820 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:39 +0200
Subject: KVM: SVM: clean up nested_svm_exit_handled_msr

This patch changes nested svm to call nested_svm_exit_handled_msr
directly and not through nested_svm_do.

[alex: fix oops due to nested kmap_atomics]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 38 +++++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 5e55a1bdd13..e85d79142ff 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1483,18 +1483,21 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
-static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
-				       void *arg1, void *arg2,
-				       void *opaque)
+static bool nested_svm_exit_handled_msr(struct vcpu_svm *svm)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	u8 *msrpm = (u8 *)arg2;
-	u32 t0, t1;
-	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u32 param = svm->vmcb->control.exit_info_1 & 1;
+	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
+	bool ret = false;
+	u32 t0, t1;
+	u8 *msrpm;
 
-	if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
-		return 0;
+	if (!(svm->nested.intercept & (1ULL << INTERCEPT_MSR_PROT)))
+		return false;
+
+	msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
+
+	if (!msrpm)
+		goto out;
 
 	switch (msr) {
 	case 0 ... 0x1fff:
@@ -1512,13 +1515,16 @@ static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
 		t0 %= 8;
 		break;
 	default:
-		return 1;
-		break;
+		ret = true;
+		goto out;
 	}
-	if (msrpm[t1] & ((1 << param) << t0))
-		return 1;
 
-	return 0;
+	ret = msrpm[t1] & ((1 << param) << t0);
+
+out:
+	nested_svm_unmap(msrpm, KM_USER0);
+
+	return ret;
 }
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
@@ -1548,9 +1554,7 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 
 	switch (exit_code) {
 	case SVM_EXIT_MSR:
-		if (nested_svm_do(svm, svm->nested.vmcb, svm->nested.vmcb_msrpm,
-				  NULL, nested_svm_exit_handled_msr))
-			vmexit = true;
+		vmexit = nested_svm_exit_handled_msr(svm);
 		break;
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
-- 
cgit v1.2.3


From 9966bf6872598362b632b738213edfb5a961315d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:40 +0200
Subject: KVM: SVM: clean up nestec vmload/vmsave paths

This patch removes the usage of nested_svm_do from the vmload and
vmsave emulation code paths.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e85d79142ff..78c0463ccdd 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -128,8 +128,6 @@ static void svm_complete_interrupts(struct vcpu_svm *svm);
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
-static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
-			     void *arg2, void *opaque);
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code);
 
@@ -1865,7 +1863,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	return 0;
 }
 
-static int nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
+static void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
 {
 	to_vmcb->save.fs = from_vmcb->save.fs;
 	to_vmcb->save.gs = from_vmcb->save.gs;
@@ -1879,44 +1877,44 @@ static int nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
 	to_vmcb->save.sysenter_cs = from_vmcb->save.sysenter_cs;
 	to_vmcb->save.sysenter_esp = from_vmcb->save.sysenter_esp;
 	to_vmcb->save.sysenter_eip = from_vmcb->save.sysenter_eip;
-
-	return 1;
-}
-
-static int nested_svm_vmload(struct vcpu_svm *svm, void *nested_vmcb,
-			     void *arg2, void *opaque)
-{
-	return nested_svm_vmloadsave((struct vmcb *)nested_vmcb, svm->vmcb);
-}
-
-static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
-			     void *arg2, void *opaque)
-{
-	return nested_svm_vmloadsave(svm->vmcb, (struct vmcb *)nested_vmcb);
 }
 
 static int vmload_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
+	struct vmcb *nested_vmcb;
+
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmload);
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	if (!nested_vmcb)
+		return 1;
+
+	nested_svm_vmloadsave(nested_vmcb, svm->vmcb);
+	nested_svm_unmap(nested_vmcb, KM_USER0);
 
 	return 1;
 }
 
 static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
+	struct vmcb *nested_vmcb;
+
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmsave);
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	if (!nested_vmcb)
+		return 1;
+
+	nested_svm_vmloadsave(svm->vmcb, nested_vmcb);
+	nested_svm_unmap(nested_vmcb, KM_USER0);
 
 	return 1;
 }
-- 
cgit v1.2.3


From 9738b2c97d19d87e5c204ae8c3f715a546bb6773 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:41 +0200
Subject: KVM: SVM: clean up nested vmrun path

This patch removes the usage of nested_svm_do from the vmrun emulation
path.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 78c0463ccdd..68b6d4cdd15 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1724,25 +1724,35 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	return 0;
 }
 
-static int nested_svm_vmrun_msrpm(struct vcpu_svm *svm, void *arg1,
-				  void *arg2, void *opaque)
+static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 {
+	u32 *nested_msrpm;
 	int i;
-	u32 *nested_msrpm = (u32*)arg1;
+
+	nested_msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
+	if (!nested_msrpm)
+		return false;
+
 	for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
 		svm->nested.msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
+
 	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested.msrpm);
 
-	return 0;
+	nested_svm_unmap(nested_msrpm, KM_USER0);
+
+	return true;
 }
 
-static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
-			    void *arg2, void *opaque)
+static bool nested_svm_vmrun(struct vcpu_svm *svm)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	struct vmcb *nested_vmcb;
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	if (!nested_vmcb)
+		return false;
+
 	/* nested_vmcb is our indicator if nested SVM is activated */
 	svm->nested.vmcb = svm->vmcb->save.rax;
 
@@ -1858,9 +1868,11 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
 	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
 
+	nested_svm_unmap(nested_vmcb, KM_USER0);
+
 	enable_gif(svm);
 
-	return 0;
+	return true;
 }
 
 static void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
@@ -1928,12 +1940,10 @@ static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	if (nested_svm_do(svm, svm->vmcb->save.rax, 0,
-			  NULL, nested_svm_vmrun))
+	if (!nested_svm_vmrun(svm))
 		return 1;
 
-	if (nested_svm_do(svm, svm->nested.vmcb_msrpm, 0,
-		      NULL, nested_svm_vmrun_msrpm))
+	if (!nested_svm_vmrun_msrpm(svm))
 		return 1;
 
 	return 1;
-- 
cgit v1.2.3


From ea8e064fe22a132da1473d82a57751208e6b8bfd Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:42 +0200
Subject: KVM: SVM: remove nested_svm_do and helper functions

This function is not longer required. So remove it.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 60 ------------------------------------------------------
 1 file changed, 60 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 68b6d4cdd15..d458297d54c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1421,66 +1421,6 @@ static void nested_svm_unmap(void *addr, enum km_type idx)
 	kvm_release_page_dirty(page);
 }
 
-static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
-{
-	struct page *page;
-
-	down_read(&current->mm->mmap_sem);
-	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
-	up_read(&current->mm->mmap_sem);
-
-	if (is_error_page(page)) {
-		printk(KERN_INFO "%s: could not find page at 0x%llx\n",
-		       __func__, gpa);
-		kvm_release_page_clean(page);
-		kvm_inject_gp(&svm->vcpu, 0);
-		return NULL;
-	}
-	return page;
-}
-
-static int nested_svm_do(struct vcpu_svm *svm,
-			 u64 arg1_gpa, u64 arg2_gpa, void *opaque,
-			 int (*handler)(struct vcpu_svm *svm,
-					void *arg1,
-					void *arg2,
-					void *opaque))
-{
-	struct page *arg1_page;
-	struct page *arg2_page = NULL;
-	void *arg1;
-	void *arg2 = NULL;
-	int retval;
-
-	arg1_page = nested_svm_get_page(svm, arg1_gpa);
-	if(arg1_page == NULL)
-		return 1;
-
-	if (arg2_gpa) {
-		arg2_page = nested_svm_get_page(svm, arg2_gpa);
-		if(arg2_page == NULL) {
-			kvm_release_page_clean(arg1_page);
-			return 1;
-		}
-	}
-
-	arg1 = kmap_atomic(arg1_page, KM_USER0);
-	if (arg2_gpa)
-		arg2 = kmap_atomic(arg2_page, KM_USER1);
-
-	retval = handler(svm, arg1, arg2, opaque);
-
-	kunmap_atomic(arg1, KM_USER0);
-	if (arg2_gpa)
-		kunmap_atomic(arg2, KM_USER1);
-
-	kvm_release_page_dirty(arg1_page);
-	if (arg2_gpa)
-		kvm_release_page_dirty(arg2_page);
-
-	return retval;
-}
-
 static bool nested_svm_exit_handled_msr(struct vcpu_svm *svm)
 {
 	u32 param = svm->vmcb->control.exit_info_1 & 1;
-- 
cgit v1.2.3


From 1f8da47805072e89454ccfdada553c2afc4dfb79 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:43 +0200
Subject: KVM: SVM: handle errors in vmrun emulation path appropriatly

If nested svm fails to load the msrpm the vmrun succeeds with the old
msrpm which is not correct. This patch changes the logic to roll back
to host mode in case the msrpm cannot be loaded.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index d458297d54c..53376f144d7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1874,6 +1874,7 @@ static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	nsvm_printk("VMrun\n");
+
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
@@ -1884,7 +1885,18 @@ static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 		return 1;
 
 	if (!nested_svm_vmrun_msrpm(svm))
-		return 1;
+		goto failed;
+
+	return 1;
+
+failed:
+
+	svm->vmcb->control.exit_code    = SVM_EXIT_ERR;
+	svm->vmcb->control.exit_code_hi = 0;
+	svm->vmcb->control.exit_info_1  = 0;
+	svm->vmcb->control.exit_info_2  = 0;
+
+	nested_svm_vmexit(svm);
 
 	return 1;
 }
-- 
cgit v1.2.3


From 410e4d573d9b7fbd134f9a47815b6ad517492a08 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:44 +0200
Subject: KVM: SVM: move special nested exit handling to separate function

This patch moves the handling for special nested vmexits like #pf to a
separate function. This makes the kvm_override parameter obsolete and
makes the code more readable.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 80 ++++++++++++++++++++++++++++++++++--------------------
 1 file changed, 50 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 53376f144d7..be28a38db91 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -47,6 +47,10 @@ MODULE_LICENSE("GPL");
 #define SVM_FEATURE_LBRV (1 << 1)
 #define SVM_FEATURE_SVML (1 << 2)
 
+#define NESTED_EXIT_HOST	0	/* Exit handled on host level */
+#define NESTED_EXIT_DONE	1	/* Exit caused nested vmexit  */
+#define NESTED_EXIT_CONTINUE	2	/* Further checks needed      */
+
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
 /* Turn on to get debugging output*/
@@ -126,7 +130,7 @@ module_param(nested, int, S_IRUGO);
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 static void svm_complete_interrupts(struct vcpu_svm *svm);
 
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
+static int nested_svm_exit_handled(struct vcpu_svm *svm);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code);
@@ -1365,7 +1369,7 @@ static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 	svm->vmcb->control.exit_info_1 = error_code;
 	svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
 
-	return nested_svm_exit_handled(svm, false);
+	return nested_svm_exit_handled(svm);
 }
 
 static inline int nested_svm_intr(struct vcpu_svm *svm)
@@ -1379,7 +1383,7 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 
 		svm->vmcb->control.exit_code = SVM_EXIT_INTR;
 
-		if (nested_svm_exit_handled(svm, false)) {
+		if (nested_svm_exit_handled(svm)) {
 			nsvm_printk("VMexit -> INTR\n");
 			return 1;
 		}
@@ -1465,31 +1469,39 @@ out:
 	return ret;
 }
 
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
+static int nested_svm_exit_special(struct vcpu_svm *svm)
 {
 	u32 exit_code = svm->vmcb->control.exit_code;
-	bool vmexit = false;
 
-	if (kvm_override) {
-		switch (exit_code) {
-		case SVM_EXIT_INTR:
-		case SVM_EXIT_NMI:
-			return 0;
+	switch (exit_code) {
+	case SVM_EXIT_INTR:
+	case SVM_EXIT_NMI:
+		return NESTED_EXIT_HOST;
 		/* For now we are always handling NPFs when using them */
-		case SVM_EXIT_NPF:
-			if (npt_enabled)
-				return 0;
-			break;
-		/* When we're shadowing, trap PFs */
-		case SVM_EXIT_EXCP_BASE + PF_VECTOR:
-			if (!npt_enabled)
-				return 0;
-			break;
-		default:
-			break;
-		}
+	case SVM_EXIT_NPF:
+		if (npt_enabled)
+			return NESTED_EXIT_HOST;
+		break;
+	/* When we're shadowing, trap PFs */
+	case SVM_EXIT_EXCP_BASE + PF_VECTOR:
+		if (!npt_enabled)
+			return NESTED_EXIT_HOST;
+		break;
+	default:
+		break;
 	}
 
+	return NESTED_EXIT_CONTINUE;
+}
+
+/*
+ * If this function returns true, this #vmexit was already handled
+ */
+static int nested_svm_exit_handled(struct vcpu_svm *svm)
+{
+	u32 exit_code = svm->vmcb->control.exit_code;
+	int vmexit = NESTED_EXIT_HOST;
+
 	switch (exit_code) {
 	case SVM_EXIT_MSR:
 		vmexit = nested_svm_exit_handled_msr(svm);
@@ -1497,42 +1509,42 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
 		if (svm->nested.intercept_cr_read & cr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
 		if (svm->nested.intercept_cr_write & cr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
 		if (svm->nested.intercept_dr_read & dr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
 		if (svm->nested.intercept_dr_write & dr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
 		u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
 		if (svm->nested.intercept_exceptions & excp_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
 		nsvm_printk("exit code: 0x%x\n", exit_code);
 		if (svm->nested.intercept & exit_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 	}
 	}
 
-	if (vmexit) {
+	if (vmexit == NESTED_EXIT_DONE) {
 		nsvm_printk("#VMEXIT reason=%04x\n", exit_code);
 		nested_svm_vmexit(svm);
 	}
@@ -2312,10 +2324,18 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	trace_kvm_exit(exit_code, svm->vmcb->save.rip);
 
 	if (is_nested(svm)) {
+		int vmexit;
+
 		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
 			    exit_code, svm->vmcb->control.exit_info_1,
 			    svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
-		if (nested_svm_exit_handled(svm, true))
+
+		vmexit = nested_svm_exit_special(svm);
+
+		if (vmexit == NESTED_EXIT_CONTINUE)
+			vmexit = nested_svm_exit_handled(svm);
+
+		if (vmexit == NESTED_EXIT_DONE)
 			return 1;
 	}
 
-- 
cgit v1.2.3


From cda0ffdd862d36d0b054249ce920f00d1dbae037 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:45 +0200
Subject: KVM: SVM: remove unnecessary is_nested check from svm_cpu_run

This check is not necessary. We have to sync the vcpu->arch.cr2 always
back to the VMCB. This patch remove the is_nested check.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index be28a38db91..a1cfa7d57ab 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2602,8 +2602,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	fs_selector = kvm_read_fs();
 	gs_selector = kvm_read_gs();
 	ldt_selector = kvm_read_ldt();
-	if (!is_nested(svm))
-		svm->vmcb->save.cr2 = vcpu->arch.cr2;
+	svm->vmcb->save.cr2 = vcpu->arch.cr2;
 	/* required for live migration with NPT */
 	if (npt_enabled)
 		svm->vmcb->save.cr3 = vcpu->arch.cr3;
-- 
cgit v1.2.3


From 26666957a58fab7c8a4a31f1ab24d3bbf4c58c7a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:46 +0200
Subject: KVM: SVM: move nested_svm_intr main logic out of if-clause

This patch removes one indentation level from nested_svm_intr and
makes the logic more readable.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index a1cfa7d57ab..144f2025799 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1374,19 +1374,20 @@ static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 
 static inline int nested_svm_intr(struct vcpu_svm *svm)
 {
-	if (is_nested(svm)) {
-		if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
-			return 0;
+	if (!is_nested(svm))
+		return 0;
 
-		if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
-			return 0;
+	if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
+		return 0;
 
-		svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+	if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
+		return 0;
 
-		if (nested_svm_exit_handled(svm)) {
-			nsvm_printk("VMexit -> INTR\n");
-			return 1;
-		}
+	svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+
+	if (nested_svm_exit_handled(svm)) {
+		nsvm_printk("VMexit -> INTR\n");
+		return 1;
 	}
 
 	return 0;
-- 
cgit v1.2.3


From 108768de55949c778bd95b36f3b17e652e59cd5b Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:47 +0200
Subject: KVM: SVM: check for nested VINTR flag in svm_interrupt_allowed

Not checking for this flag breaks any nested hypervisor that does not
set VINTR. So fix it with this patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 144f2025799..6610f60b4c9 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2463,7 +2463,7 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
 		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
 		gif_set(svm) &&
-		!is_nested(svm);
+		!(is_nested(svm) && (svm->vcpu.arch.hflags & HF_VINTR_MASK));
 }
 
 static void enable_irq_window(struct kvm_vcpu *vcpu)
-- 
cgit v1.2.3


From 4b6e4dca7011613c8508640c10a091b3ed2cd215 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:48 +0200
Subject: KVM: SVM: enable nested svm by default

Nested SVM is (in my experience) stable enough to be enabled by
default. So omit the requirement to pass a module parameter.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 6610f60b4c9..8f7751a66a2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -124,7 +124,7 @@ static int npt = 1;
 
 module_param(npt, int, S_IRUGO);
 
-static int nested = 0;
+static int nested = 1;
 module_param(nested, int, S_IRUGO);
 
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
-- 
cgit v1.2.3


From cb142eb743d02d48165c9d941b601d731cc4a003 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 9 Aug 2009 15:17:40 +0300
Subject: KVM: Update cr8 intercept when APIC TPR is changed by userspace

Since on vcpu entry we do it only if apic is enabled we should do
it when TPR is changed while apic is disabled. This happens when windows
resets HW without setting TPR to zero.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 132c5100d4f..31bf98427f4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -77,6 +77,7 @@ static u64 __read_mostly efer_reserved_bits = 0xfffffffffffffffeULL;
 #define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
+static void update_cr8_intercept(struct kvm_vcpu *vcpu);
 static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				    struct kvm_cpuid_entry2 __user *entries);
 
@@ -1629,6 +1630,7 @@ static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
 	vcpu_load(vcpu);
 	memcpy(vcpu->arch.apic->regs, s->regs, sizeof *s);
 	kvm_apic_post_state_restore(vcpu);
+	update_cr8_intercept(vcpu);
 	vcpu_put(vcpu);
 
 	return 0;
-- 
cgit v1.2.3


From 52c7847d121da3651c08d9e9a99eb8a7cf2faa7a Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 10 Aug 2009 15:42:41 +0300
Subject: KVM: SVM: Drop tlb flush workaround in npt

It is no longer possible to reproduce the problem any more, so presumably
it has been fixed.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 8f7751a66a2..944cc9c04b3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1187,17 +1187,8 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	error_code = svm->vmcb->control.exit_info_1;
 
 	trace_kvm_page_fault(fault_address, error_code);
-	/*
-	 * FIXME: Tis shouldn't be necessary here, but there is a flush
-	 * missing in the MMU code. Until we find this bug, flush the
-	 * complete TLB here on an NPF
-	 */
-	if (npt_enabled)
-		svm_flush_tlb(&svm->vcpu);
-	else {
-		if (kvm_event_needs_reinjection(&svm->vcpu))
-			kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
-	}
+	if (!npt_enabled && kvm_event_needs_reinjection(&svm->vcpu))
+		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
-- 
cgit v1.2.3


From 345dcaa8fde7fa70252d58c862bf41fd2149ca2c Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 12 Aug 2009 15:29:37 +0300
Subject: KVM: VMX: Adjust rflags if in real mode emulation

We set rflags.vm86 when virtualizing real mode to do through vm8086 mode;
so we need to take it out again when reading rflags.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 31c3a8740c4..2b7e7bd190f 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -781,7 +781,12 @@ static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
-	return vmcs_readl(GUEST_RFLAGS);
+	unsigned long rflags;
+
+	rflags = vmcs_readl(GUEST_RFLAGS);
+	if (to_vmx(vcpu)->rmode.vm86_active)
+		rflags &= ~(unsigned long)(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
+	return rflags;
 }
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
-- 
cgit v1.2.3


From c0c7c04b874bf98a10d8e0c8322a5d3bc93536bc Mon Sep 17 00:00:00 2001
From: Anthony Liguori <aliguori@us.ibm.com>
Date: Tue, 11 Aug 2009 15:57:59 -0500
Subject: KVM: When switching to a vm8086 task, load segments as 16-bit

According to 16.2.5 in the SDM, eflags.vm in the tss is consulted before loading
and new segments.  If eflags.vm == 1, then the segments are treated as 16-bit
segments.  The LDTR and TR are not normally available in vm86 mode so if they
happen to somehow get loaded, they need to be treated as 32-bit segments.

This fixes an invalid vmentry failure in a custom OS that was happening after
a task switch into vm8086 mode.  Since the segments were being mistakenly
treated as 32-bit, we loaded garbage state.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 31bf98427f4..1aa7e6d91d4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4101,12 +4101,19 @@ static int kvm_load_realmode_segment(struct kvm_vcpu *vcpu, u16 selector, int se
 	return 0;
 }
 
+static int is_vm86_segment(struct kvm_vcpu *vcpu, int seg)
+{
+	return (seg != VCPU_SREG_LDTR) &&
+		(seg != VCPU_SREG_TR) &&
+		(kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_VM);
+}
+
 int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 				int type_bits, int seg)
 {
 	struct kvm_segment kvm_seg;
 
-	if (!(vcpu->arch.cr0 & X86_CR0_PE))
+	if (is_vm86_segment(vcpu, seg) || !(vcpu->arch.cr0 & X86_CR0_PE))
 		return kvm_load_realmode_segment(vcpu, selector, seg);
 	if (load_segment_descriptor_to_kvm_desct(vcpu, selector, &kvm_seg))
 		return 1;
-- 
cgit v1.2.3


From 56e8231841301ad38e347e33fd4319c89f697045 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 12 Aug 2009 15:04:37 +0300
Subject: KVM: Rename x86_emulate.c to emulate.c

We're in arch/x86, what could we possibly be emulating?

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_emulate.h     |  187 +++
 arch/x86/include/asm/kvm_host.h        |    2 +-
 arch/x86/include/asm/kvm_x86_emulate.h |  187 ---
 arch/x86/kvm/Makefile                  |    2 +-
 arch/x86/kvm/emulate.c                 | 2392 ++++++++++++++++++++++++++++++++
 arch/x86/kvm/x86.c                     |    2 +-
 arch/x86/kvm/x86_emulate.c             | 2392 --------------------------------
 7 files changed, 2582 insertions(+), 2582 deletions(-)
 create mode 100644 arch/x86/include/asm/kvm_emulate.h
 delete mode 100644 arch/x86/include/asm/kvm_x86_emulate.h
 create mode 100644 arch/x86/kvm/emulate.c
 delete mode 100644 arch/x86/kvm/x86_emulate.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
new file mode 100644
index 00000000000..b7ed2c42311
--- /dev/null
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -0,0 +1,187 @@
+/******************************************************************************
+ * x86_emulate.h
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef _ASM_X86_KVM_X86_EMULATE_H
+#define _ASM_X86_KVM_X86_EMULATE_H
+
+struct x86_emulate_ctxt;
+
+/*
+ * x86_emulate_ops:
+ *
+ * These operations represent the instruction emulator's interface to memory.
+ * There are two categories of operation: those that act on ordinary memory
+ * regions (*_std), and those that act on memory regions known to require
+ * special treatment or emulation (*_emulated).
+ *
+ * The emulator assumes that an instruction accesses only one 'emulated memory'
+ * location, that this location is the given linear faulting address (cr2), and
+ * that this is one of the instruction's data operands. Instruction fetches and
+ * stack operations are assumed never to access emulated memory. The emulator
+ * automatically deduces which operand of a string-move operation is accessing
+ * emulated memory, and assumes that the other operand accesses normal memory.
+ *
+ * NOTES:
+ *  1. The emulator isn't very smart about emulated vs. standard memory.
+ *     'Emulated memory' access addresses should be checked for sanity.
+ *     'Normal memory' accesses may fault, and the caller must arrange to
+ *     detect and handle reentrancy into the emulator via recursive faults.
+ *     Accesses may be unaligned and may cross page boundaries.
+ *  2. If the access fails (cannot emulate, or a standard access faults) then
+ *     it is up to the memop to propagate the fault to the guest VM via
+ *     some out-of-band mechanism, unknown to the emulator. The memop signals
+ *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
+ *     then immediately bail.
+ *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
+ *     cmpxchg8b_emulated need support 8-byte accesses.
+ *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
+ */
+/* Access completed successfully: continue emulation as normal. */
+#define X86EMUL_CONTINUE        0
+/* Access is unhandleable: bail from emulation and return error to caller. */
+#define X86EMUL_UNHANDLEABLE    1
+/* Terminate emulation but return success to the caller. */
+#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
+#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
+#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
+struct x86_emulate_ops {
+	/*
+	 * read_std: Read bytes of standard (non-emulated/special) memory.
+	 *           Used for instruction fetch, stack operations, and others.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_std)(unsigned long addr, void *val,
+			unsigned int bytes, struct kvm_vcpu *vcpu);
+
+	/*
+	 * read_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_emulated)(unsigned long addr,
+			     void *val,
+			     unsigned int bytes,
+			     struct kvm_vcpu *vcpu);
+
+	/*
+	 * write_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to which to write.
+	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
+	 *                required).
+	 *  @bytes: [IN ] Number of bytes to write to memory.
+	 */
+	int (*write_emulated)(unsigned long addr,
+			      const void *val,
+			      unsigned int bytes,
+			      struct kvm_vcpu *vcpu);
+
+	/*
+	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
+	 *                   emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to access.
+	 *  @old:   [IN ] Value expected to be current at @addr.
+	 *  @new:   [IN ] Value to write to @addr.
+	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
+	 */
+	int (*cmpxchg_emulated)(unsigned long addr,
+				const void *old,
+				const void *new,
+				unsigned int bytes,
+				struct kvm_vcpu *vcpu);
+
+};
+
+/* Type, address-of, and value of an instruction's operand. */
+struct operand {
+	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
+	unsigned int bytes;
+	unsigned long val, orig_val, *ptr;
+};
+
+struct fetch_cache {
+	u8 data[15];
+	unsigned long start;
+	unsigned long end;
+};
+
+struct decode_cache {
+	u8 twobyte;
+	u8 b;
+	u8 lock_prefix;
+	u8 rep_prefix;
+	u8 op_bytes;
+	u8 ad_bytes;
+	u8 rex_prefix;
+	struct operand src;
+	struct operand src2;
+	struct operand dst;
+	bool has_seg_override;
+	u8 seg_override;
+	unsigned int d;
+	unsigned long regs[NR_VCPU_REGS];
+	unsigned long eip;
+	/* modrm */
+	u8 modrm;
+	u8 modrm_mod;
+	u8 modrm_reg;
+	u8 modrm_rm;
+	u8 use_modrm_ea;
+	bool rip_relative;
+	unsigned long modrm_ea;
+	void *modrm_ptr;
+	unsigned long modrm_val;
+	struct fetch_cache fetch;
+};
+
+#define X86_SHADOW_INT_MOV_SS  1
+#define X86_SHADOW_INT_STI     2
+
+struct x86_emulate_ctxt {
+	/* Register state before/after emulation. */
+	struct kvm_vcpu *vcpu;
+
+	unsigned long eflags;
+	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
+	int mode;
+	u32 cs_base;
+
+	/* interruptibility state, as a result of execution of STI or MOV SS */
+	int interruptibility;
+
+	/* decode cache */
+	struct decode_cache decode;
+};
+
+/* Repeat String Operation Prefix */
+#define REPE_PREFIX	1
+#define REPNE_PREFIX	2
+
+/* Execution mode, passed to the emulator. */
+#define X86EMUL_MODE_REAL     0	/* Real mode.             */
+#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
+#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
+#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
+
+/* Host execution mode. */
+#if defined(CONFIG_X86_32)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
+#elif defined(CONFIG_X86_64)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
+#endif
+
+int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
+		    struct x86_emulate_ops *ops);
+int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
+		     struct x86_emulate_ops *ops);
+
+#endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index b17d845897b..33901be75a3 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -138,7 +138,7 @@ enum {
 	VCPU_SREG_LDTR,
 };
 
-#include <asm/kvm_x86_emulate.h>
+#include <asm/kvm_emulate.h>
 
 #define KVM_NR_MEM_OBJS 40
 
diff --git a/arch/x86/include/asm/kvm_x86_emulate.h b/arch/x86/include/asm/kvm_x86_emulate.h
deleted file mode 100644
index b7ed2c42311..00000000000
--- a/arch/x86/include/asm/kvm_x86_emulate.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/******************************************************************************
- * x86_emulate.h
- *
- * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
- *
- * Copyright (c) 2005 Keir Fraser
- *
- * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
- */
-
-#ifndef _ASM_X86_KVM_X86_EMULATE_H
-#define _ASM_X86_KVM_X86_EMULATE_H
-
-struct x86_emulate_ctxt;
-
-/*
- * x86_emulate_ops:
- *
- * These operations represent the instruction emulator's interface to memory.
- * There are two categories of operation: those that act on ordinary memory
- * regions (*_std), and those that act on memory regions known to require
- * special treatment or emulation (*_emulated).
- *
- * The emulator assumes that an instruction accesses only one 'emulated memory'
- * location, that this location is the given linear faulting address (cr2), and
- * that this is one of the instruction's data operands. Instruction fetches and
- * stack operations are assumed never to access emulated memory. The emulator
- * automatically deduces which operand of a string-move operation is accessing
- * emulated memory, and assumes that the other operand accesses normal memory.
- *
- * NOTES:
- *  1. The emulator isn't very smart about emulated vs. standard memory.
- *     'Emulated memory' access addresses should be checked for sanity.
- *     'Normal memory' accesses may fault, and the caller must arrange to
- *     detect and handle reentrancy into the emulator via recursive faults.
- *     Accesses may be unaligned and may cross page boundaries.
- *  2. If the access fails (cannot emulate, or a standard access faults) then
- *     it is up to the memop to propagate the fault to the guest VM via
- *     some out-of-band mechanism, unknown to the emulator. The memop signals
- *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
- *     then immediately bail.
- *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
- *     cmpxchg8b_emulated need support 8-byte accesses.
- *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
- */
-/* Access completed successfully: continue emulation as normal. */
-#define X86EMUL_CONTINUE        0
-/* Access is unhandleable: bail from emulation and return error to caller. */
-#define X86EMUL_UNHANDLEABLE    1
-/* Terminate emulation but return success to the caller. */
-#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
-#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
-#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
-struct x86_emulate_ops {
-	/*
-	 * read_std: Read bytes of standard (non-emulated/special) memory.
-	 *           Used for instruction fetch, stack operations, and others.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_std)(unsigned long addr, void *val,
-			unsigned int bytes, struct kvm_vcpu *vcpu);
-
-	/*
-	 * read_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_emulated)(unsigned long addr,
-			     void *val,
-			     unsigned int bytes,
-			     struct kvm_vcpu *vcpu);
-
-	/*
-	 * write_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to which to write.
-	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
-	 *                required).
-	 *  @bytes: [IN ] Number of bytes to write to memory.
-	 */
-	int (*write_emulated)(unsigned long addr,
-			      const void *val,
-			      unsigned int bytes,
-			      struct kvm_vcpu *vcpu);
-
-	/*
-	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
-	 *                   emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to access.
-	 *  @old:   [IN ] Value expected to be current at @addr.
-	 *  @new:   [IN ] Value to write to @addr.
-	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
-	 */
-	int (*cmpxchg_emulated)(unsigned long addr,
-				const void *old,
-				const void *new,
-				unsigned int bytes,
-				struct kvm_vcpu *vcpu);
-
-};
-
-/* Type, address-of, and value of an instruction's operand. */
-struct operand {
-	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
-	unsigned int bytes;
-	unsigned long val, orig_val, *ptr;
-};
-
-struct fetch_cache {
-	u8 data[15];
-	unsigned long start;
-	unsigned long end;
-};
-
-struct decode_cache {
-	u8 twobyte;
-	u8 b;
-	u8 lock_prefix;
-	u8 rep_prefix;
-	u8 op_bytes;
-	u8 ad_bytes;
-	u8 rex_prefix;
-	struct operand src;
-	struct operand src2;
-	struct operand dst;
-	bool has_seg_override;
-	u8 seg_override;
-	unsigned int d;
-	unsigned long regs[NR_VCPU_REGS];
-	unsigned long eip;
-	/* modrm */
-	u8 modrm;
-	u8 modrm_mod;
-	u8 modrm_reg;
-	u8 modrm_rm;
-	u8 use_modrm_ea;
-	bool rip_relative;
-	unsigned long modrm_ea;
-	void *modrm_ptr;
-	unsigned long modrm_val;
-	struct fetch_cache fetch;
-};
-
-#define X86_SHADOW_INT_MOV_SS  1
-#define X86_SHADOW_INT_STI     2
-
-struct x86_emulate_ctxt {
-	/* Register state before/after emulation. */
-	struct kvm_vcpu *vcpu;
-
-	unsigned long eflags;
-	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
-	int mode;
-	u32 cs_base;
-
-	/* interruptibility state, as a result of execution of STI or MOV SS */
-	int interruptibility;
-
-	/* decode cache */
-	struct decode_cache decode;
-};
-
-/* Repeat String Operation Prefix */
-#define REPE_PREFIX	1
-#define REPNE_PREFIX	2
-
-/* Execution mode, passed to the emulator. */
-#define X86EMUL_MODE_REAL     0	/* Real mode.             */
-#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
-#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
-#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
-
-/* Host execution mode. */
-#if defined(CONFIG_X86_32)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
-#elif defined(CONFIG_X86_64)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
-#endif
-
-int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
-		    struct x86_emulate_ops *ops);
-int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
-		     struct x86_emulate_ops *ops);
-
-#endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index afaaa7627d9..0e7fe78d0f7 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -9,7 +9,7 @@ kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
 				coalesced_mmio.o irq_comm.o eventfd.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
-kvm-y			+= x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
+kvm-y			+= x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
 			   i8254.o timer.o
 kvm-intel-y		+= vmx.o
 kvm-amd-y		+= svm.o
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
new file mode 100644
index 00000000000..2eb807a7b62
--- /dev/null
+++ b/arch/x86/kvm/emulate.c
@@ -0,0 +1,2392 @@
+/******************************************************************************
+ * emulate.c
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * Linux coding style, mod r/m decoder, segment base fixes, real-mode
+ * privileged instructions:
+ *
+ * Copyright (C) 2006 Qumranet
+ *
+ *   Avi Kivity <avi@qumranet.com>
+ *   Yaniv Kamay <yaniv@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef __KERNEL__
+#include <stdio.h>
+#include <stdint.h>
+#include <public/xen.h>
+#define DPRINTF(_f, _a ...) printf(_f , ## _a)
+#else
+#include <linux/kvm_host.h>
+#include "kvm_cache_regs.h"
+#define DPRINTF(x...) do {} while (0)
+#endif
+#include <linux/module.h>
+#include <asm/kvm_emulate.h>
+
+#include "mmu.h"		/* for is_long_mode() */
+
+/*
+ * Opcode effective-address decode tables.
+ * Note that we only emulate instructions that have at least one memory
+ * operand (excluding implicit stack references). We assume that stack
+ * references and instruction fetches will never occur in special memory
+ * areas that require emulation. So, for example, 'mov <imm>,<reg>' need
+ * not be handled.
+ */
+
+/* Operand sizes: 8-bit operands or specified/overridden size. */
+#define ByteOp      (1<<0)	/* 8-bit operands. */
+/* Destination operand type. */
+#define ImplicitOps (1<<1)	/* Implicit in opcode. No generic decode. */
+#define DstReg      (2<<1)	/* Register operand. */
+#define DstMem      (3<<1)	/* Memory operand. */
+#define DstAcc      (4<<1)      /* Destination Accumulator */
+#define DstMask     (7<<1)
+/* Source operand type. */
+#define SrcNone     (0<<4)	/* No source operand. */
+#define SrcImplicit (0<<4)	/* Source operand is implicit in the opcode. */
+#define SrcReg      (1<<4)	/* Register operand. */
+#define SrcMem      (2<<4)	/* Memory operand. */
+#define SrcMem16    (3<<4)	/* Memory operand (16-bit). */
+#define SrcMem32    (4<<4)	/* Memory operand (32-bit). */
+#define SrcImm      (5<<4)	/* Immediate operand. */
+#define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
+#define SrcOne      (7<<4)	/* Implied '1' */
+#define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
+#define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
+#define SrcMask     (0xf<<4)
+/* Generic ModRM decode. */
+#define ModRM       (1<<8)
+/* Destination is only written; never read. */
+#define Mov         (1<<9)
+#define BitOp       (1<<10)
+#define MemAbs      (1<<11)      /* Memory operand is absolute displacement */
+#define String      (1<<12)     /* String instruction (rep capable) */
+#define Stack       (1<<13)     /* Stack instruction (push/pop) */
+#define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
+#define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
+#define GroupMask   0xff        /* Group number stored in bits 0:7 */
+/* Source 2 operand type */
+#define Src2None    (0<<29)
+#define Src2CL      (1<<29)
+#define Src2ImmByte (2<<29)
+#define Src2One     (3<<29)
+#define Src2Imm16   (4<<29)
+#define Src2Mask    (7<<29)
+
+enum {
+	Group1_80, Group1_81, Group1_82, Group1_83,
+	Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
+};
+
+static u32 opcode_table[256] = {
+	/* 0x00 - 0x07 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	/* 0x08 - 0x0F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x10 - 0x17 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x18 - 0x1F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x20 - 0x27 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
+	/* 0x28 - 0x2F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x30 - 0x37 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x38 - 0x3F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	0, 0,
+	/* 0x40 - 0x47 */
+	DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
+	/* 0x48 - 0x4F */
+	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
+	/* 0x50 - 0x57 */
+	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
+	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
+	/* 0x58 - 0x5F */
+	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
+	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
+	/* 0x60 - 0x67 */
+	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
+	0, 0, 0, 0,
+	/* 0x68 - 0x6F */
+	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
+	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
+	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
+	/* 0x70 - 0x77 */
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	/* 0x78 - 0x7F */
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	/* 0x80 - 0x87 */
+	Group | Group1_80, Group | Group1_81,
+	Group | Group1_82, Group | Group1_83,
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	/* 0x88 - 0x8F */
+	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
+	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
+	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+	/* 0x90 - 0x97 */
+	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
+	/* 0x98 - 0x9F */
+	0, 0, SrcImm | Src2Imm16, 0,
+	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
+	/* 0xA0 - 0xA7 */
+	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
+	ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
+	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+	ByteOp | ImplicitOps | String, ImplicitOps | String,
+	/* 0xA8 - 0xAF */
+	0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+	ByteOp | ImplicitOps | String, ImplicitOps | String,
+	/* 0xB0 - 0xB7 */
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	/* 0xB8 - 0xBF */
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	/* 0xC0 - 0xC7 */
+	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
+	0, ImplicitOps | Stack, 0, 0,
+	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
+	/* 0xC8 - 0xCF */
+	0, 0, 0, ImplicitOps | Stack,
+	ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
+	/* 0xD0 - 0xD7 */
+	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+	0, 0, 0, 0,
+	/* 0xD8 - 0xDF */
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xE0 - 0xE7 */
+	0, 0, 0, 0,
+	ByteOp | SrcImmUByte, SrcImmUByte,
+	ByteOp | SrcImmUByte, SrcImmUByte,
+	/* 0xE8 - 0xEF */
+	SrcImm | Stack, SrcImm | ImplicitOps,
+	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	/* 0xF0 - 0xF7 */
+	0, 0, 0, 0,
+	ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
+	/* 0xF8 - 0xFF */
+	ImplicitOps, 0, ImplicitOps, ImplicitOps,
+	ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
+};
+
+static u32 twobyte_table[256] = {
+	/* 0x00 - 0x0F */
+	0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
+	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
+	/* 0x10 - 0x1F */
+	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x20 - 0x2F */
+	ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x30 - 0x3F */
+	ImplicitOps, 0, ImplicitOps, 0,
+	ImplicitOps, ImplicitOps, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x40 - 0x47 */
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	/* 0x48 - 0x4F */
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	/* 0x50 - 0x5F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x60 - 0x6F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x70 - 0x7F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x80 - 0x8F */
+	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
+	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
+	/* 0x90 - 0x9F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xA0 - 0xA7 */
+	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	DstMem | SrcReg | Src2ImmByte | ModRM,
+	DstMem | SrcReg | Src2CL | ModRM, 0, 0,
+	/* 0xA8 - 0xAF */
+	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	DstMem | SrcReg | Src2ImmByte | ModRM,
+	DstMem | SrcReg | Src2CL | ModRM,
+	ModRM, 0,
+	/* 0xB0 - 0xB7 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
+	    DstMem | SrcReg | ModRM | BitOp,
+	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+	    DstReg | SrcMem16 | ModRM | Mov,
+	/* 0xB8 - 0xBF */
+	0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
+	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+	    DstReg | SrcMem16 | ModRM | Mov,
+	/* 0xC0 - 0xCF */
+	0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xD0 - 0xDF */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xE0 - 0xEF */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xF0 - 0xFF */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static u32 group_table[] = {
+	[Group1_80*8] =
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	[Group1_81*8] =
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	[Group1_82*8] =
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	[Group1_83*8] =
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	[Group1A*8] =
+	DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
+	[Group3_Byte*8] =
+	ByteOp | SrcImm | DstMem | ModRM, 0,
+	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+	0, 0, 0, 0,
+	[Group3*8] =
+	DstMem | SrcImm | ModRM, 0,
+	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+	0, 0, 0, 0,
+	[Group4*8] =
+	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+	0, 0, 0, 0, 0, 0,
+	[Group5*8] =
+	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+	SrcMem | ModRM | Stack, 0,
+	SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
+	[Group7*8] =
+	0, 0, ModRM | SrcMem, ModRM | SrcMem,
+	SrcNone | ModRM | DstMem | Mov, 0,
+	SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
+};
+
+static u32 group2_table[] = {
+	[Group7*8] =
+	SrcNone | ModRM, 0, 0, SrcNone | ModRM,
+	SrcNone | ModRM | DstMem | Mov, 0,
+	SrcMem16 | ModRM | Mov, 0,
+};
+
+/* EFLAGS bit definitions. */
+#define EFLG_VM (1<<17)
+#define EFLG_RF (1<<16)
+#define EFLG_OF (1<<11)
+#define EFLG_DF (1<<10)
+#define EFLG_IF (1<<9)
+#define EFLG_SF (1<<7)
+#define EFLG_ZF (1<<6)
+#define EFLG_AF (1<<4)
+#define EFLG_PF (1<<2)
+#define EFLG_CF (1<<0)
+
+/*
+ * Instruction emulation:
+ * Most instructions are emulated directly via a fragment of inline assembly
+ * code. This allows us to save/restore EFLAGS and thus very easily pick up
+ * any modified flags.
+ */
+
+#if defined(CONFIG_X86_64)
+#define _LO32 "k"		/* force 32-bit operand */
+#define _STK  "%%rsp"		/* stack pointer */
+#elif defined(__i386__)
+#define _LO32 ""		/* force 32-bit operand */
+#define _STK  "%%esp"		/* stack pointer */
+#endif
+
+/*
+ * These EFLAGS bits are restored from saved value during emulation, and
+ * any changes are written back to the saved value after emulation.
+ */
+#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
+
+/* Before executing instruction: restore necessary bits in EFLAGS. */
+#define _PRE_EFLAGS(_sav, _msk, _tmp)					\
+	/* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
+	"movl %"_sav",%"_LO32 _tmp"; "                                  \
+	"push %"_tmp"; "                                                \
+	"push %"_tmp"; "                                                \
+	"movl %"_msk",%"_LO32 _tmp"; "                                  \
+	"andl %"_LO32 _tmp",("_STK"); "                                 \
+	"pushf; "                                                       \
+	"notl %"_LO32 _tmp"; "                                          \
+	"andl %"_LO32 _tmp",("_STK"); "                                 \
+	"andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); "	\
+	"pop  %"_tmp"; "                                                \
+	"orl  %"_LO32 _tmp",("_STK"); "                                 \
+	"popf; "                                                        \
+	"pop  %"_sav"; "
+
+/* After executing instruction: write-back necessary bits in EFLAGS. */
+#define _POST_EFLAGS(_sav, _msk, _tmp) \
+	/* _sav |= EFLAGS & _msk; */		\
+	"pushf; "				\
+	"pop  %"_tmp"; "			\
+	"andl %"_msk",%"_LO32 _tmp"; "		\
+	"orl  %"_LO32 _tmp",%"_sav"; "
+
+#ifdef CONFIG_X86_64
+#define ON64(x) x
+#else
+#define ON64(x)
+#endif
+
+#define ____emulate_2op(_op, _src, _dst, _eflags, _x, _y, _suffix)	\
+	do {								\
+		__asm__ __volatile__ (					\
+			_PRE_EFLAGS("0", "4", "2")			\
+			_op _suffix " %"_x"3,%1; "			\
+			_POST_EFLAGS("0", "4", "2")			\
+			: "=m" (_eflags), "=m" ((_dst).val),		\
+			  "=&r" (_tmp)					\
+			: _y ((_src).val), "i" (EFLAGS_MASK));		\
+	} while (0)
+
+
+/* Raw emulation: instruction has two explicit operands. */
+#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
+	do {								\
+		unsigned long _tmp;					\
+									\
+		switch ((_dst).bytes) {					\
+		case 2:							\
+			____emulate_2op(_op,_src,_dst,_eflags,_wx,_wy,"w"); \
+			break;						\
+		case 4:							\
+			____emulate_2op(_op,_src,_dst,_eflags,_lx,_ly,"l"); \
+			break;						\
+		case 8:							\
+			ON64(____emulate_2op(_op,_src,_dst,_eflags,_qx,_qy,"q")); \
+			break;						\
+		}							\
+	} while (0)
+
+#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
+	do {								     \
+		unsigned long _tmp;					     \
+		switch ((_dst).bytes) {				             \
+		case 1:							     \
+			____emulate_2op(_op,_src,_dst,_eflags,_bx,_by,"b");  \
+			break;						     \
+		default:						     \
+			__emulate_2op_nobyte(_op, _src, _dst, _eflags,	     \
+					     _wx, _wy, _lx, _ly, _qx, _qy);  \
+			break;						     \
+		}							     \
+	} while (0)
+
+/* Source operand is byte-sized and may be restricted to just %cl. */
+#define emulate_2op_SrcB(_op, _src, _dst, _eflags)                      \
+	__emulate_2op(_op, _src, _dst, _eflags,				\
+		      "b", "c", "b", "c", "b", "c", "b", "c")
+
+/* Source operand is byte, word, long or quad sized. */
+#define emulate_2op_SrcV(_op, _src, _dst, _eflags)                      \
+	__emulate_2op(_op, _src, _dst, _eflags,				\
+		      "b", "q", "w", "r", _LO32, "r", "", "r")
+
+/* Source operand is word, long or quad sized. */
+#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags)               \
+	__emulate_2op_nobyte(_op, _src, _dst, _eflags,			\
+			     "w", "r", _LO32, "r", "", "r")
+
+/* Instruction has three operands and one operand is stored in ECX register */
+#define __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, _suffix, _type) 	\
+	do {									\
+		unsigned long _tmp;						\
+		_type _clv  = (_cl).val;  					\
+		_type _srcv = (_src).val;    					\
+		_type _dstv = (_dst).val;					\
+										\
+		__asm__ __volatile__ (						\
+			_PRE_EFLAGS("0", "5", "2")				\
+			_op _suffix " %4,%1 \n"					\
+			_POST_EFLAGS("0", "5", "2")				\
+			: "=m" (_eflags), "+r" (_dstv), "=&r" (_tmp)		\
+			: "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK)		\
+			); 							\
+										\
+		(_cl).val  = (unsigned long) _clv;				\
+		(_src).val = (unsigned long) _srcv;				\
+		(_dst).val = (unsigned long) _dstv;				\
+	} while (0)
+
+#define emulate_2op_cl(_op, _cl, _src, _dst, _eflags)				\
+	do {									\
+		switch ((_dst).bytes) {						\
+		case 2:								\
+			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
+						"w", unsigned short);         	\
+			break;							\
+		case 4: 							\
+			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
+						"l", unsigned int);           	\
+			break;							\
+		case 8:								\
+			ON64(__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,	\
+						"q", unsigned long));  		\
+			break;							\
+		}								\
+	} while (0)
+
+#define __emulate_1op(_op, _dst, _eflags, _suffix)			\
+	do {								\
+		unsigned long _tmp;					\
+									\
+		__asm__ __volatile__ (					\
+			_PRE_EFLAGS("0", "3", "2")			\
+			_op _suffix " %1; "				\
+			_POST_EFLAGS("0", "3", "2")			\
+			: "=m" (_eflags), "+m" ((_dst).val),		\
+			  "=&r" (_tmp)					\
+			: "i" (EFLAGS_MASK));				\
+	} while (0)
+
+/* Instruction has only one explicit operand (no source operand). */
+#define emulate_1op(_op, _dst, _eflags)                                    \
+	do {								\
+		switch ((_dst).bytes) {				        \
+		case 1:	__emulate_1op(_op, _dst, _eflags, "b"); break;	\
+		case 2:	__emulate_1op(_op, _dst, _eflags, "w"); break;	\
+		case 4:	__emulate_1op(_op, _dst, _eflags, "l"); break;	\
+		case 8:	ON64(__emulate_1op(_op, _dst, _eflags, "q")); break; \
+		}							\
+	} while (0)
+
+/* Fetch next part of the instruction being emulated. */
+#define insn_fetch(_type, _size, _eip)                                  \
+({	unsigned long _x;						\
+	rc = do_insn_fetch(ctxt, ops, (_eip), &_x, (_size));		\
+	if (rc != 0)							\
+		goto done;						\
+	(_eip) += (_size);						\
+	(_type)_x;							\
+})
+
+static inline unsigned long ad_mask(struct decode_cache *c)
+{
+	return (1UL << (c->ad_bytes << 3)) - 1;
+}
+
+/* Access/update address held in a register, based on addressing mode. */
+static inline unsigned long
+address_mask(struct decode_cache *c, unsigned long reg)
+{
+	if (c->ad_bytes == sizeof(unsigned long))
+		return reg;
+	else
+		return reg & ad_mask(c);
+}
+
+static inline unsigned long
+register_address(struct decode_cache *c, unsigned long base, unsigned long reg)
+{
+	return base + address_mask(c, reg);
+}
+
+static inline void
+register_address_increment(struct decode_cache *c, unsigned long *reg, int inc)
+{
+	if (c->ad_bytes == sizeof(unsigned long))
+		*reg += inc;
+	else
+		*reg = (*reg & ~ad_mask(c)) | ((*reg + inc) & ad_mask(c));
+}
+
+static inline void jmp_rel(struct decode_cache *c, int rel)
+{
+	register_address_increment(c, &c->eip, rel);
+}
+
+static void set_seg_override(struct decode_cache *c, int seg)
+{
+	c->has_seg_override = true;
+	c->seg_override = seg;
+}
+
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+{
+	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
+		return 0;
+
+	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+}
+
+static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+				       struct decode_cache *c)
+{
+	if (!c->has_seg_override)
+		return 0;
+
+	return seg_base(ctxt, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_SS);
+}
+
+static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
+			      struct x86_emulate_ops *ops,
+			      unsigned long linear, u8 *dest)
+{
+	struct fetch_cache *fc = &ctxt->decode.fetch;
+	int rc;
+	int size;
+
+	if (linear < fc->start || linear >= fc->end) {
+		size = min(15UL, PAGE_SIZE - offset_in_page(linear));
+		rc = ops->read_std(linear, fc->data, size, ctxt->vcpu);
+		if (rc)
+			return rc;
+		fc->start = linear;
+		fc->end = linear + size;
+	}
+	*dest = fc->data[linear - fc->start];
+	return 0;
+}
+
+static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
+			 struct x86_emulate_ops *ops,
+			 unsigned long eip, void *dest, unsigned size)
+{
+	int rc = 0;
+
+	eip += ctxt->cs_base;
+	while (size--) {
+		rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
+		if (rc)
+			return rc;
+	}
+	return 0;
+}
+
+/*
+ * Given the 'reg' portion of a ModRM byte, and a register block, return a
+ * pointer into the block that addresses the relevant register.
+ * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
+ */
+static void *decode_register(u8 modrm_reg, unsigned long *regs,
+			     int highbyte_regs)
+{
+	void *p;
+
+	p = &regs[modrm_reg];
+	if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
+		p = (unsigned char *)&regs[modrm_reg & 3] + 1;
+	return p;
+}
+
+static int read_descriptor(struct x86_emulate_ctxt *ctxt,
+			   struct x86_emulate_ops *ops,
+			   void *ptr,
+			   u16 *size, unsigned long *address, int op_bytes)
+{
+	int rc;
+
+	if (op_bytes == 2)
+		op_bytes = 3;
+	*address = 0;
+	rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2,
+			   ctxt->vcpu);
+	if (rc)
+		return rc;
+	rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes,
+			   ctxt->vcpu);
+	return rc;
+}
+
+static int test_cc(unsigned int condition, unsigned int flags)
+{
+	int rc = 0;
+
+	switch ((condition & 15) >> 1) {
+	case 0: /* o */
+		rc |= (flags & EFLG_OF);
+		break;
+	case 1: /* b/c/nae */
+		rc |= (flags & EFLG_CF);
+		break;
+	case 2: /* z/e */
+		rc |= (flags & EFLG_ZF);
+		break;
+	case 3: /* be/na */
+		rc |= (flags & (EFLG_CF|EFLG_ZF));
+		break;
+	case 4: /* s */
+		rc |= (flags & EFLG_SF);
+		break;
+	case 5: /* p/pe */
+		rc |= (flags & EFLG_PF);
+		break;
+	case 7: /* le/ng */
+		rc |= (flags & EFLG_ZF);
+		/* fall through */
+	case 6: /* l/nge */
+		rc |= (!(flags & EFLG_SF) != !(flags & EFLG_OF));
+		break;
+	}
+
+	/* Odd condition identifiers (lsb == 1) have inverted sense. */
+	return (!!rc ^ (condition & 1));
+}
+
+static void decode_register_operand(struct operand *op,
+				    struct decode_cache *c,
+				    int inhibit_bytereg)
+{
+	unsigned reg = c->modrm_reg;
+	int highbyte_regs = c->rex_prefix == 0;
+
+	if (!(c->d & ModRM))
+		reg = (c->b & 7) | ((c->rex_prefix & 1) << 3);
+	op->type = OP_REG;
+	if ((c->d & ByteOp) && !inhibit_bytereg) {
+		op->ptr = decode_register(reg, c->regs, highbyte_regs);
+		op->val = *(u8 *)op->ptr;
+		op->bytes = 1;
+	} else {
+		op->ptr = decode_register(reg, c->regs, 0);
+		op->bytes = c->op_bytes;
+		switch (op->bytes) {
+		case 2:
+			op->val = *(u16 *)op->ptr;
+			break;
+		case 4:
+			op->val = *(u32 *)op->ptr;
+			break;
+		case 8:
+			op->val = *(u64 *) op->ptr;
+			break;
+		}
+	}
+	op->orig_val = op->val;
+}
+
+static int decode_modrm(struct x86_emulate_ctxt *ctxt,
+			struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	u8 sib;
+	int index_reg = 0, base_reg = 0, scale;
+	int rc = 0;
+
+	if (c->rex_prefix) {
+		c->modrm_reg = (c->rex_prefix & 4) << 1;	/* REX.R */
+		index_reg = (c->rex_prefix & 2) << 2; /* REX.X */
+		c->modrm_rm = base_reg = (c->rex_prefix & 1) << 3; /* REG.B */
+	}
+
+	c->modrm = insn_fetch(u8, 1, c->eip);
+	c->modrm_mod |= (c->modrm & 0xc0) >> 6;
+	c->modrm_reg |= (c->modrm & 0x38) >> 3;
+	c->modrm_rm |= (c->modrm & 0x07);
+	c->modrm_ea = 0;
+	c->use_modrm_ea = 1;
+
+	if (c->modrm_mod == 3) {
+		c->modrm_ptr = decode_register(c->modrm_rm,
+					       c->regs, c->d & ByteOp);
+		c->modrm_val = *(unsigned long *)c->modrm_ptr;
+		return rc;
+	}
+
+	if (c->ad_bytes == 2) {
+		unsigned bx = c->regs[VCPU_REGS_RBX];
+		unsigned bp = c->regs[VCPU_REGS_RBP];
+		unsigned si = c->regs[VCPU_REGS_RSI];
+		unsigned di = c->regs[VCPU_REGS_RDI];
+
+		/* 16-bit ModR/M decode. */
+		switch (c->modrm_mod) {
+		case 0:
+			if (c->modrm_rm == 6)
+				c->modrm_ea += insn_fetch(u16, 2, c->eip);
+			break;
+		case 1:
+			c->modrm_ea += insn_fetch(s8, 1, c->eip);
+			break;
+		case 2:
+			c->modrm_ea += insn_fetch(u16, 2, c->eip);
+			break;
+		}
+		switch (c->modrm_rm) {
+		case 0:
+			c->modrm_ea += bx + si;
+			break;
+		case 1:
+			c->modrm_ea += bx + di;
+			break;
+		case 2:
+			c->modrm_ea += bp + si;
+			break;
+		case 3:
+			c->modrm_ea += bp + di;
+			break;
+		case 4:
+			c->modrm_ea += si;
+			break;
+		case 5:
+			c->modrm_ea += di;
+			break;
+		case 6:
+			if (c->modrm_mod != 0)
+				c->modrm_ea += bp;
+			break;
+		case 7:
+			c->modrm_ea += bx;
+			break;
+		}
+		if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
+		    (c->modrm_rm == 6 && c->modrm_mod != 0))
+			if (!c->has_seg_override)
+				set_seg_override(c, VCPU_SREG_SS);
+		c->modrm_ea = (u16)c->modrm_ea;
+	} else {
+		/* 32/64-bit ModR/M decode. */
+		if ((c->modrm_rm & 7) == 4) {
+			sib = insn_fetch(u8, 1, c->eip);
+			index_reg |= (sib >> 3) & 7;
+			base_reg |= sib & 7;
+			scale = sib >> 6;
+
+			if ((base_reg & 7) == 5 && c->modrm_mod == 0)
+				c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			else
+				c->modrm_ea += c->regs[base_reg];
+			if (index_reg != 4)
+				c->modrm_ea += c->regs[index_reg] << scale;
+		} else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
+			if (ctxt->mode == X86EMUL_MODE_PROT64)
+				c->rip_relative = 1;
+		} else
+			c->modrm_ea += c->regs[c->modrm_rm];
+		switch (c->modrm_mod) {
+		case 0:
+			if (c->modrm_rm == 5)
+				c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			break;
+		case 1:
+			c->modrm_ea += insn_fetch(s8, 1, c->eip);
+			break;
+		case 2:
+			c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			break;
+		}
+	}
+done:
+	return rc;
+}
+
+static int decode_abs(struct x86_emulate_ctxt *ctxt,
+		      struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+
+	switch (c->ad_bytes) {
+	case 2:
+		c->modrm_ea = insn_fetch(u16, 2, c->eip);
+		break;
+	case 4:
+		c->modrm_ea = insn_fetch(u32, 4, c->eip);
+		break;
+	case 8:
+		c->modrm_ea = insn_fetch(u64, 8, c->eip);
+		break;
+	}
+done:
+	return rc;
+}
+
+int
+x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+	int mode = ctxt->mode;
+	int def_op_bytes, def_ad_bytes, group;
+
+	/* Shadow copy of register state. Committed on successful emulation. */
+
+	memset(c, 0, sizeof(struct decode_cache));
+	c->eip = kvm_rip_read(ctxt->vcpu);
+	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
+	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+
+	switch (mode) {
+	case X86EMUL_MODE_REAL:
+	case X86EMUL_MODE_PROT16:
+		def_op_bytes = def_ad_bytes = 2;
+		break;
+	case X86EMUL_MODE_PROT32:
+		def_op_bytes = def_ad_bytes = 4;
+		break;
+#ifdef CONFIG_X86_64
+	case X86EMUL_MODE_PROT64:
+		def_op_bytes = 4;
+		def_ad_bytes = 8;
+		break;
+#endif
+	default:
+		return -1;
+	}
+
+	c->op_bytes = def_op_bytes;
+	c->ad_bytes = def_ad_bytes;
+
+	/* Legacy prefixes. */
+	for (;;) {
+		switch (c->b = insn_fetch(u8, 1, c->eip)) {
+		case 0x66:	/* operand-size override */
+			/* switch between 2/4 bytes */
+			c->op_bytes = def_op_bytes ^ 6;
+			break;
+		case 0x67:	/* address-size override */
+			if (mode == X86EMUL_MODE_PROT64)
+				/* switch between 4/8 bytes */
+				c->ad_bytes = def_ad_bytes ^ 12;
+			else
+				/* switch between 2/4 bytes */
+				c->ad_bytes = def_ad_bytes ^ 6;
+			break;
+		case 0x26:	/* ES override */
+		case 0x2e:	/* CS override */
+		case 0x36:	/* SS override */
+		case 0x3e:	/* DS override */
+			set_seg_override(c, (c->b >> 3) & 3);
+			break;
+		case 0x64:	/* FS override */
+		case 0x65:	/* GS override */
+			set_seg_override(c, c->b & 7);
+			break;
+		case 0x40 ... 0x4f: /* REX */
+			if (mode != X86EMUL_MODE_PROT64)
+				goto done_prefixes;
+			c->rex_prefix = c->b;
+			continue;
+		case 0xf0:	/* LOCK */
+			c->lock_prefix = 1;
+			break;
+		case 0xf2:	/* REPNE/REPNZ */
+			c->rep_prefix = REPNE_PREFIX;
+			break;
+		case 0xf3:	/* REP/REPE/REPZ */
+			c->rep_prefix = REPE_PREFIX;
+			break;
+		default:
+			goto done_prefixes;
+		}
+
+		/* Any legacy prefix after a REX prefix nullifies its effect. */
+
+		c->rex_prefix = 0;
+	}
+
+done_prefixes:
+
+	/* REX prefix. */
+	if (c->rex_prefix)
+		if (c->rex_prefix & 8)
+			c->op_bytes = 8;	/* REX.W */
+
+	/* Opcode byte(s). */
+	c->d = opcode_table[c->b];
+	if (c->d == 0) {
+		/* Two-byte opcode? */
+		if (c->b == 0x0f) {
+			c->twobyte = 1;
+			c->b = insn_fetch(u8, 1, c->eip);
+			c->d = twobyte_table[c->b];
+		}
+	}
+
+	if (c->d & Group) {
+		group = c->d & GroupMask;
+		c->modrm = insn_fetch(u8, 1, c->eip);
+		--c->eip;
+
+		group = (group << 3) + ((c->modrm >> 3) & 7);
+		if ((c->d & GroupDual) && (c->modrm >> 6) == 3)
+			c->d = group2_table[group];
+		else
+			c->d = group_table[group];
+	}
+
+	/* Unrecognised? */
+	if (c->d == 0) {
+		DPRINTF("Cannot emulate %02x\n", c->b);
+		return -1;
+	}
+
+	if (mode == X86EMUL_MODE_PROT64 && (c->d & Stack))
+		c->op_bytes = 8;
+
+	/* ModRM and SIB bytes. */
+	if (c->d & ModRM)
+		rc = decode_modrm(ctxt, ops);
+	else if (c->d & MemAbs)
+		rc = decode_abs(ctxt, ops);
+	if (rc)
+		goto done;
+
+	if (!c->has_seg_override)
+		set_seg_override(c, VCPU_SREG_DS);
+
+	if (!(!c->twobyte && c->b == 0x8d))
+		c->modrm_ea += seg_override_base(ctxt, c);
+
+	if (c->ad_bytes != 8)
+		c->modrm_ea = (u32)c->modrm_ea;
+	/*
+	 * Decode and fetch the source operand: register, memory
+	 * or immediate.
+	 */
+	switch (c->d & SrcMask) {
+	case SrcNone:
+		break;
+	case SrcReg:
+		decode_register_operand(&c->src, c, 0);
+		break;
+	case SrcMem16:
+		c->src.bytes = 2;
+		goto srcmem_common;
+	case SrcMem32:
+		c->src.bytes = 4;
+		goto srcmem_common;
+	case SrcMem:
+		c->src.bytes = (c->d & ByteOp) ? 1 :
+							   c->op_bytes;
+		/* Don't fetch the address for invlpg: it could be unmapped. */
+		if (c->twobyte && c->b == 0x01 && c->modrm_reg == 7)
+			break;
+	srcmem_common:
+		/*
+		 * For instructions with a ModR/M byte, switch to register
+		 * access if Mod = 3.
+		 */
+		if ((c->d & ModRM) && c->modrm_mod == 3) {
+			c->src.type = OP_REG;
+			c->src.val = c->modrm_val;
+			c->src.ptr = c->modrm_ptr;
+			break;
+		}
+		c->src.type = OP_MEM;
+		break;
+	case SrcImm:
+	case SrcImmU:
+		c->src.type = OP_IMM;
+		c->src.ptr = (unsigned long *)c->eip;
+		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		if (c->src.bytes == 8)
+			c->src.bytes = 4;
+		/* NB. Immediates are sign-extended as necessary. */
+		switch (c->src.bytes) {
+		case 1:
+			c->src.val = insn_fetch(s8, 1, c->eip);
+			break;
+		case 2:
+			c->src.val = insn_fetch(s16, 2, c->eip);
+			break;
+		case 4:
+			c->src.val = insn_fetch(s32, 4, c->eip);
+			break;
+		}
+		if ((c->d & SrcMask) == SrcImmU) {
+			switch (c->src.bytes) {
+			case 1:
+				c->src.val &= 0xff;
+				break;
+			case 2:
+				c->src.val &= 0xffff;
+				break;
+			case 4:
+				c->src.val &= 0xffffffff;
+				break;
+			}
+		}
+		break;
+	case SrcImmByte:
+	case SrcImmUByte:
+		c->src.type = OP_IMM;
+		c->src.ptr = (unsigned long *)c->eip;
+		c->src.bytes = 1;
+		if ((c->d & SrcMask) == SrcImmByte)
+			c->src.val = insn_fetch(s8, 1, c->eip);
+		else
+			c->src.val = insn_fetch(u8, 1, c->eip);
+		break;
+	case SrcOne:
+		c->src.bytes = 1;
+		c->src.val = 1;
+		break;
+	}
+
+	/*
+	 * Decode and fetch the second source operand: register, memory
+	 * or immediate.
+	 */
+	switch (c->d & Src2Mask) {
+	case Src2None:
+		break;
+	case Src2CL:
+		c->src2.bytes = 1;
+		c->src2.val = c->regs[VCPU_REGS_RCX] & 0x8;
+		break;
+	case Src2ImmByte:
+		c->src2.type = OP_IMM;
+		c->src2.ptr = (unsigned long *)c->eip;
+		c->src2.bytes = 1;
+		c->src2.val = insn_fetch(u8, 1, c->eip);
+		break;
+	case Src2Imm16:
+		c->src2.type = OP_IMM;
+		c->src2.ptr = (unsigned long *)c->eip;
+		c->src2.bytes = 2;
+		c->src2.val = insn_fetch(u16, 2, c->eip);
+		break;
+	case Src2One:
+		c->src2.bytes = 1;
+		c->src2.val = 1;
+		break;
+	}
+
+	/* Decode and fetch the destination operand: register or memory. */
+	switch (c->d & DstMask) {
+	case ImplicitOps:
+		/* Special instructions do their own operand decoding. */
+		return 0;
+	case DstReg:
+		decode_register_operand(&c->dst, c,
+			 c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
+		break;
+	case DstMem:
+		if ((c->d & ModRM) && c->modrm_mod == 3) {
+			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+			c->dst.type = OP_REG;
+			c->dst.val = c->dst.orig_val = c->modrm_val;
+			c->dst.ptr = c->modrm_ptr;
+			break;
+		}
+		c->dst.type = OP_MEM;
+		break;
+	case DstAcc:
+		c->dst.type = OP_REG;
+		c->dst.bytes = c->op_bytes;
+		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
+		switch (c->op_bytes) {
+			case 1:
+				c->dst.val = *(u8 *)c->dst.ptr;
+				break;
+			case 2:
+				c->dst.val = *(u16 *)c->dst.ptr;
+				break;
+			case 4:
+				c->dst.val = *(u32 *)c->dst.ptr;
+				break;
+		}
+		c->dst.orig_val = c->dst.val;
+		break;
+	}
+
+	if (c->rip_relative)
+		c->modrm_ea += c->eip;
+
+done:
+	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
+}
+
+static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+
+	c->dst.type  = OP_MEM;
+	c->dst.bytes = c->op_bytes;
+	c->dst.val = c->src.val;
+	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
+	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
+					       c->regs[VCPU_REGS_RSP]);
+}
+
+static int emulate_pop(struct x86_emulate_ctxt *ctxt,
+		       struct x86_emulate_ops *ops,
+		       void *dest, int len)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+
+	rc = ops->read_emulated(register_address(c, ss_base(ctxt),
+						 c->regs[VCPU_REGS_RSP]),
+				dest, len, ctxt->vcpu);
+	if (rc != 0)
+		return rc;
+
+	register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
+	return rc;
+}
+
+static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
+				struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+
+	rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
+	if (rc != 0)
+		return rc;
+	return 0;
+}
+
+static inline void emulate_grp2(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	switch (c->modrm_reg) {
+	case 0:	/* rol */
+		emulate_2op_SrcB("rol", c->src, c->dst, ctxt->eflags);
+		break;
+	case 1:	/* ror */
+		emulate_2op_SrcB("ror", c->src, c->dst, ctxt->eflags);
+		break;
+	case 2:	/* rcl */
+		emulate_2op_SrcB("rcl", c->src, c->dst, ctxt->eflags);
+		break;
+	case 3:	/* rcr */
+		emulate_2op_SrcB("rcr", c->src, c->dst, ctxt->eflags);
+		break;
+	case 4:	/* sal/shl */
+	case 6:	/* sal/shl */
+		emulate_2op_SrcB("sal", c->src, c->dst, ctxt->eflags);
+		break;
+	case 5:	/* shr */
+		emulate_2op_SrcB("shr", c->src, c->dst, ctxt->eflags);
+		break;
+	case 7:	/* sar */
+		emulate_2op_SrcB("sar", c->src, c->dst, ctxt->eflags);
+		break;
+	}
+}
+
+static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
+			       struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+
+	switch (c->modrm_reg) {
+	case 0 ... 1:	/* test */
+		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
+		break;
+	case 2:	/* not */
+		c->dst.val = ~c->dst.val;
+		break;
+	case 3:	/* neg */
+		emulate_1op("neg", c->dst, ctxt->eflags);
+		break;
+	default:
+		DPRINTF("Cannot emulate %02x\n", c->b);
+		rc = X86EMUL_UNHANDLEABLE;
+		break;
+	}
+	return rc;
+}
+
+static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
+			       struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+
+	switch (c->modrm_reg) {
+	case 0:	/* inc */
+		emulate_1op("inc", c->dst, ctxt->eflags);
+		break;
+	case 1:	/* dec */
+		emulate_1op("dec", c->dst, ctxt->eflags);
+		break;
+	case 2: /* call near abs */ {
+		long int old_eip;
+		old_eip = c->eip;
+		c->eip = c->src.val;
+		c->src.val = old_eip;
+		emulate_push(ctxt);
+		break;
+	}
+	case 4: /* jmp abs */
+		c->eip = c->src.val;
+		break;
+	case 6:	/* push */
+		emulate_push(ctxt);
+		break;
+	}
+	return 0;
+}
+
+static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
+			       struct x86_emulate_ops *ops,
+			       unsigned long memop)
+{
+	struct decode_cache *c = &ctxt->decode;
+	u64 old, new;
+	int rc;
+
+	rc = ops->read_emulated(memop, &old, 8, ctxt->vcpu);
+	if (rc != 0)
+		return rc;
+
+	if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
+	    ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
+
+		c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
+		c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
+		ctxt->eflags &= ~EFLG_ZF;
+
+	} else {
+		new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
+		       (u32) c->regs[VCPU_REGS_RBX];
+
+		rc = ops->cmpxchg_emulated(memop, &old, &new, 8, ctxt->vcpu);
+		if (rc != 0)
+			return rc;
+		ctxt->eflags |= EFLG_ZF;
+	}
+	return 0;
+}
+
+static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
+			   struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+	unsigned long cs;
+
+	rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
+	if (rc)
+		return rc;
+	if (c->op_bytes == 4)
+		c->eip = (u32)c->eip;
+	rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
+	if (rc)
+		return rc;
+	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
+	return rc;
+}
+
+static inline int writeback(struct x86_emulate_ctxt *ctxt,
+			    struct x86_emulate_ops *ops)
+{
+	int rc;
+	struct decode_cache *c = &ctxt->decode;
+
+	switch (c->dst.type) {
+	case OP_REG:
+		/* The 4-byte case *is* correct:
+		 * in 64-bit mode we zero-extend.
+		 */
+		switch (c->dst.bytes) {
+		case 1:
+			*(u8 *)c->dst.ptr = (u8)c->dst.val;
+			break;
+		case 2:
+			*(u16 *)c->dst.ptr = (u16)c->dst.val;
+			break;
+		case 4:
+			*c->dst.ptr = (u32)c->dst.val;
+			break;	/* 64b: zero-ext */
+		case 8:
+			*c->dst.ptr = c->dst.val;
+			break;
+		}
+		break;
+	case OP_MEM:
+		if (c->lock_prefix)
+			rc = ops->cmpxchg_emulated(
+					(unsigned long)c->dst.ptr,
+					&c->dst.orig_val,
+					&c->dst.val,
+					c->dst.bytes,
+					ctxt->vcpu);
+		else
+			rc = ops->write_emulated(
+					(unsigned long)c->dst.ptr,
+					&c->dst.val,
+					c->dst.bytes,
+					ctxt->vcpu);
+		if (rc != 0)
+			return rc;
+		break;
+	case OP_NONE:
+		/* no writeback */
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+{
+	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
+	/*
+	 * an sti; sti; sequence only disable interrupts for the first
+	 * instruction. So, if the last instruction, be it emulated or
+	 * not, left the system with the INT_STI flag enabled, it
+	 * means that the last instruction is an sti. We should not
+	 * leave the flag on in this case. The same goes for mov ss
+	 */
+	if (!(int_shadow & mask))
+		ctxt->interruptibility = mask;
+}
+
+static inline void
+setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
+	struct kvm_segment *cs, struct kvm_segment *ss)
+{
+	memset(cs, 0, sizeof(struct kvm_segment));
+	kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
+	memset(ss, 0, sizeof(struct kvm_segment));
+
+	cs->l = 0;		/* will be adjusted later */
+	cs->base = 0;		/* flat segment */
+	cs->g = 1;		/* 4kb granularity */
+	cs->limit = 0xffffffff;	/* 4GB limit */
+	cs->type = 0x0b;	/* Read, Execute, Accessed */
+	cs->s = 1;
+	cs->dpl = 0;		/* will be adjusted later */
+	cs->present = 1;
+	cs->db = 1;
+
+	ss->unusable = 0;
+	ss->base = 0;		/* flat segment */
+	ss->limit = 0xffffffff;	/* 4GB limit */
+	ss->g = 1;		/* 4kb granularity */
+	ss->s = 1;
+	ss->type = 0x03;	/* Read/Write, Accessed */
+	ss->db = 1;		/* 32bit stack segment */
+	ss->dpl = 0;
+	ss->present = 1;
+}
+
+static int
+emulate_syscall(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* syscall is not available in real mode */
+	if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+	msr_data >>= 32;
+	cs.selector = (u16)(msr_data & 0xfffc);
+	ss.selector = (u16)(msr_data + 8);
+
+	if (is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->regs[VCPU_REGS_RCX] = c->eip;
+	if (is_long_mode(ctxt->vcpu)) {
+#ifdef CONFIG_X86_64
+		c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu,
+			ctxt->mode == X86EMUL_MODE_PROT64 ?
+			MSR_LSTAR : MSR_CSTAR, &msr_data);
+		c->eip = msr_data;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
+		ctxt->eflags &= ~(msr_data | EFLG_RF);
+#endif
+	} else {
+		/* legacy mode */
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+		c->eip = (u32)msr_data;
+
+		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	}
+
+	return 0;
+}
+
+static int
+emulate_sysenter(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL ||
+		!(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* XXX sysenter/sysexit have not been tested in 64bit mode.
+	* Therefore, we inject an #UD.
+	*/
+	if (ctxt->mode == X86EMUL_MODE_PROT64)
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (ctxt->mode) {
+	case X86EMUL_MODE_PROT32:
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	case X86EMUL_MODE_PROT64:
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	}
+
+	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	cs.selector = (u16)msr_data;
+	cs.selector &= ~SELECTOR_RPL_MASK;
+	ss.selector = cs.selector + 8;
+	ss.selector &= ~SELECTOR_RPL_MASK;
+	if (ctxt->mode == X86EMUL_MODE_PROT64
+		|| is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
+	c->eip = msr_data;
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
+	c->regs[VCPU_REGS_RSP] = msr_data;
+
+	return 0;
+}
+
+static int
+emulate_sysexit(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+	int usermode;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* sysexit must be called from CPL 0 */
+	if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	if ((c->rex_prefix & 0x8) != 0x0)
+		usermode = X86EMUL_MODE_PROT64;
+	else
+		usermode = X86EMUL_MODE_PROT32;
+
+	cs.dpl = 3;
+	ss.dpl = 3;
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (usermode) {
+	case X86EMUL_MODE_PROT32:
+		cs.selector = (u16)(msr_data + 16);
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = (u16)(msr_data + 24);
+		break;
+	case X86EMUL_MODE_PROT64:
+		cs.selector = (u16)(msr_data + 32);
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = cs.selector + 8;
+		cs.db = 0;
+		cs.l = 1;
+		break;
+	}
+	cs.selector |= SELECTOR_RPL_MASK;
+	ss.selector |= SELECTOR_RPL_MASK;
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
+	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
+
+	return 0;
+}
+
+int
+x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
+{
+	unsigned long memop = 0;
+	u64 msr_data;
+	unsigned long saved_eip = 0;
+	struct decode_cache *c = &ctxt->decode;
+	unsigned int port;
+	int io_dir_in;
+	int rc = 0;
+
+	ctxt->interruptibility = 0;
+
+	/* Shadow copy of register state. Committed on successful emulation.
+	 * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
+	 * modify them.
+	 */
+
+	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+	saved_eip = c->eip;
+
+	if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
+		memop = c->modrm_ea;
+
+	if (c->rep_prefix && (c->d & String)) {
+		/* All REP prefixes have the same first termination condition */
+		if (c->regs[VCPU_REGS_RCX] == 0) {
+			kvm_rip_write(ctxt->vcpu, c->eip);
+			goto done;
+		}
+		/* The second termination condition only applies for REPE
+		 * and REPNE. Test if the repeat string operation prefix is
+		 * REPE/REPZ or REPNE/REPNZ and if it's the case it tests the
+		 * corresponding termination condition according to:
+		 * 	- if REPE/REPZ and ZF = 0 then done
+		 * 	- if REPNE/REPNZ and ZF = 1 then done
+		 */
+		if ((c->b == 0xa6) || (c->b == 0xa7) ||
+				(c->b == 0xae) || (c->b == 0xaf)) {
+			if ((c->rep_prefix == REPE_PREFIX) &&
+				((ctxt->eflags & EFLG_ZF) == 0)) {
+					kvm_rip_write(ctxt->vcpu, c->eip);
+					goto done;
+			}
+			if ((c->rep_prefix == REPNE_PREFIX) &&
+				((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
+				kvm_rip_write(ctxt->vcpu, c->eip);
+				goto done;
+			}
+		}
+		c->regs[VCPU_REGS_RCX]--;
+		c->eip = kvm_rip_read(ctxt->vcpu);
+	}
+
+	if (c->src.type == OP_MEM) {
+		c->src.ptr = (unsigned long *)memop;
+		c->src.val = 0;
+		rc = ops->read_emulated((unsigned long)c->src.ptr,
+					&c->src.val,
+					c->src.bytes,
+					ctxt->vcpu);
+		if (rc != 0)
+			goto done;
+		c->src.orig_val = c->src.val;
+	}
+
+	if ((c->d & DstMask) == ImplicitOps)
+		goto special_insn;
+
+
+	if (c->dst.type == OP_MEM) {
+		c->dst.ptr = (unsigned long *)memop;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.val = 0;
+		if (c->d & BitOp) {
+			unsigned long mask = ~(c->dst.bytes * 8 - 1);
+
+			c->dst.ptr = (void *)c->dst.ptr +
+						   (c->src.val & mask) / 8;
+		}
+		if (!(c->d & Mov) &&
+				   /* optimisation - avoid slow emulated read */
+		    ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
+					   &c->dst.val,
+					  c->dst.bytes, ctxt->vcpu)) != 0))
+			goto done;
+	}
+	c->dst.orig_val = c->dst.val;
+
+special_insn:
+
+	if (c->twobyte)
+		goto twobyte_insn;
+
+	switch (c->b) {
+	case 0x00 ... 0x05:
+	      add:		/* add */
+		emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x08 ... 0x0d:
+	      or:		/* or */
+		emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x10 ... 0x15:
+	      adc:		/* adc */
+		emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x18 ... 0x1d:
+	      sbb:		/* sbb */
+		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x20 ... 0x25:
+	      and:		/* and */
+		emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x28 ... 0x2d:
+	      sub:		/* sub */
+		emulate_2op_SrcV("sub", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x30 ... 0x35:
+	      xor:		/* xor */
+		emulate_2op_SrcV("xor", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x38 ... 0x3d:
+	      cmp:		/* cmp */
+		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x40 ... 0x47: /* inc r16/r32 */
+		emulate_1op("inc", c->dst, ctxt->eflags);
+		break;
+	case 0x48 ... 0x4f: /* dec r16/r32 */
+		emulate_1op("dec", c->dst, ctxt->eflags);
+		break;
+	case 0x50 ... 0x57:  /* push reg */
+		emulate_push(ctxt);
+		break;
+	case 0x58 ... 0x5f: /* pop reg */
+	pop_instruction:
+		rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
+		if (rc != 0)
+			goto done;
+		break;
+	case 0x63:		/* movsxd */
+		if (ctxt->mode != X86EMUL_MODE_PROT64)
+			goto cannot_emulate;
+		c->dst.val = (s32) c->src.val;
+		break;
+	case 0x68: /* push imm */
+	case 0x6a: /* push imm8 */
+		emulate_push(ctxt);
+		break;
+	case 0x6c:		/* insb */
+	case 0x6d:		/* insw/insd */
+		 if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+				1,
+				(c->d & ByteOp) ? 1 : c->op_bytes,
+				c->rep_prefix ?
+				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
+				(ctxt->eflags & EFLG_DF),
+				register_address(c, es_base(ctxt),
+						 c->regs[VCPU_REGS_RDI]),
+				c->rep_prefix,
+				c->regs[VCPU_REGS_RDX]) == 0) {
+			c->eip = saved_eip;
+			return -1;
+		}
+		return 0;
+	case 0x6e:		/* outsb */
+	case 0x6f:		/* outsw/outsd */
+		if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+				0,
+				(c->d & ByteOp) ? 1 : c->op_bytes,
+				c->rep_prefix ?
+				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
+				(ctxt->eflags & EFLG_DF),
+					 register_address(c,
+					  seg_override_base(ctxt, c),
+						 c->regs[VCPU_REGS_RSI]),
+				c->rep_prefix,
+				c->regs[VCPU_REGS_RDX]) == 0) {
+			c->eip = saved_eip;
+			return -1;
+		}
+		return 0;
+	case 0x70 ... 0x7f: /* jcc (short) */
+		if (test_cc(c->b, ctxt->eflags))
+			jmp_rel(c, c->src.val);
+		break;
+	case 0x80 ... 0x83:	/* Grp1 */
+		switch (c->modrm_reg) {
+		case 0:
+			goto add;
+		case 1:
+			goto or;
+		case 2:
+			goto adc;
+		case 3:
+			goto sbb;
+		case 4:
+			goto and;
+		case 5:
+			goto sub;
+		case 6:
+			goto xor;
+		case 7:
+			goto cmp;
+		}
+		break;
+	case 0x84 ... 0x85:
+		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x86 ... 0x87:	/* xchg */
+	xchg:
+		/* Write back the register source. */
+		switch (c->dst.bytes) {
+		case 1:
+			*(u8 *) c->src.ptr = (u8) c->dst.val;
+			break;
+		case 2:
+			*(u16 *) c->src.ptr = (u16) c->dst.val;
+			break;
+		case 4:
+			*c->src.ptr = (u32) c->dst.val;
+			break;	/* 64b reg: zero-extend */
+		case 8:
+			*c->src.ptr = c->dst.val;
+			break;
+		}
+		/*
+		 * Write back the memory destination with implicit LOCK
+		 * prefix.
+		 */
+		c->dst.val = c->src.val;
+		c->lock_prefix = 1;
+		break;
+	case 0x88 ... 0x8b:	/* mov */
+		goto mov;
+	case 0x8c: { /* mov r/m, sreg */
+		struct kvm_segment segreg;
+
+		if (c->modrm_reg <= 5)
+			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
+		else {
+			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
+			       c->modrm);
+			goto cannot_emulate;
+		}
+		c->dst.val = segreg.selector;
+		break;
+	}
+	case 0x8d: /* lea r16/r32, m */
+		c->dst.val = c->modrm_ea;
+		break;
+	case 0x8e: { /* mov seg, r/m16 */
+		uint16_t sel;
+		int type_bits;
+		int err;
+
+		sel = c->src.val;
+		if (c->modrm_reg == VCPU_SREG_SS)
+			toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
+
+		if (c->modrm_reg <= 5) {
+			type_bits = (c->modrm_reg == 1) ? 9 : 1;
+			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
+							  type_bits, c->modrm_reg);
+		} else {
+			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
+					c->modrm);
+			goto cannot_emulate;
+		}
+
+		if (err < 0)
+			goto cannot_emulate;
+
+		c->dst.type = OP_NONE;  /* Disable writeback. */
+		break;
+	}
+	case 0x8f:		/* pop (sole member of Grp1a) */
+		rc = emulate_grp1a(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
+	case 0x90: /* nop / xchg r8,rax */
+		if (!(c->rex_prefix & 1)) { /* nop */
+			c->dst.type = OP_NONE;
+			break;
+		}
+	case 0x91 ... 0x97: /* xchg reg,rax */
+		c->src.type = c->dst.type = OP_REG;
+		c->src.bytes = c->dst.bytes = c->op_bytes;
+		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
+		c->src.val = *(c->src.ptr);
+		goto xchg;
+	case 0x9c: /* pushf */
+		c->src.val =  (unsigned long) ctxt->eflags;
+		emulate_push(ctxt);
+		break;
+	case 0x9d: /* popf */
+		c->dst.type = OP_REG;
+		c->dst.ptr = (unsigned long *) &ctxt->eflags;
+		c->dst.bytes = c->op_bytes;
+		goto pop_instruction;
+	case 0xa0 ... 0xa1:	/* mov */
+		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+		c->dst.val = c->src.val;
+		break;
+	case 0xa2 ... 0xa3:	/* mov */
+		c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
+		break;
+	case 0xa4 ... 0xa5:	/* movs */
+		c->dst.type = OP_MEM;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)register_address(c,
+						   es_base(ctxt),
+						   c->regs[VCPU_REGS_RDI]);
+		if ((rc = ops->read_emulated(register_address(c,
+					   seg_override_base(ctxt, c),
+					c->regs[VCPU_REGS_RSI]),
+					&c->dst.val,
+					c->dst.bytes, ctxt->vcpu)) != 0)
+			goto done;
+		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		break;
+	case 0xa6 ... 0xa7:	/* cmps */
+		c->src.type = OP_NONE; /* Disable writeback. */
+		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->src.ptr = (unsigned long *)register_address(c,
+				       seg_override_base(ctxt, c),
+						   c->regs[VCPU_REGS_RSI]);
+		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
+						&c->src.val,
+						c->src.bytes,
+						ctxt->vcpu)) != 0)
+			goto done;
+
+		c->dst.type = OP_NONE; /* Disable writeback. */
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)register_address(c,
+						   es_base(ctxt),
+						   c->regs[VCPU_REGS_RDI]);
+		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
+						&c->dst.val,
+						c->dst.bytes,
+						ctxt->vcpu)) != 0)
+			goto done;
+
+		DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
+
+		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+
+		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+				       (ctxt->eflags & EFLG_DF) ? -c->src.bytes
+								  : c->src.bytes);
+		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+								  : c->dst.bytes);
+
+		break;
+	case 0xaa ... 0xab:	/* stos */
+		c->dst.type = OP_MEM;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)register_address(c,
+						   es_base(ctxt),
+						   c->regs[VCPU_REGS_RDI]);
+		c->dst.val = c->regs[VCPU_REGS_RAX];
+		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		break;
+	case 0xac ... 0xad:	/* lods */
+		c->dst.type = OP_REG;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+		if ((rc = ops->read_emulated(register_address(c,
+						 seg_override_base(ctxt, c),
+						 c->regs[VCPU_REGS_RSI]),
+						 &c->dst.val,
+						 c->dst.bytes,
+						 ctxt->vcpu)) != 0)
+			goto done;
+		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		break;
+	case 0xae ... 0xaf:	/* scas */
+		DPRINTF("Urk! I don't handle SCAS.\n");
+		goto cannot_emulate;
+	case 0xb0 ... 0xbf: /* mov r, imm */
+		goto mov;
+	case 0xc0 ... 0xc1:
+		emulate_grp2(ctxt);
+		break;
+	case 0xc3: /* ret */
+		c->dst.type = OP_REG;
+		c->dst.ptr = &c->eip;
+		c->dst.bytes = c->op_bytes;
+		goto pop_instruction;
+	case 0xc6 ... 0xc7:	/* mov (sole member of Grp11) */
+	mov:
+		c->dst.val = c->src.val;
+		break;
+	case 0xcb:		/* ret far */
+		rc = emulate_ret_far(ctxt, ops);
+		if (rc)
+			goto done;
+		break;
+	case 0xd0 ... 0xd1:	/* Grp2 */
+		c->src.val = 1;
+		emulate_grp2(ctxt);
+		break;
+	case 0xd2 ... 0xd3:	/* Grp2 */
+		c->src.val = c->regs[VCPU_REGS_RCX];
+		emulate_grp2(ctxt);
+		break;
+	case 0xe4: 	/* inb */
+	case 0xe5: 	/* in */
+		port = c->src.val;
+		io_dir_in = 1;
+		goto do_io;
+	case 0xe6: /* outb */
+	case 0xe7: /* out */
+		port = c->src.val;
+		io_dir_in = 0;
+		goto do_io;
+	case 0xe8: /* call (near) */ {
+		long int rel = c->src.val;
+		c->src.val = (unsigned long) c->eip;
+		jmp_rel(c, rel);
+		emulate_push(ctxt);
+		break;
+	}
+	case 0xe9: /* jmp rel */
+		goto jmp;
+	case 0xea: /* jmp far */
+		if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
+					VCPU_SREG_CS) < 0) {
+			DPRINTF("jmp far: Failed to load CS descriptor\n");
+			goto cannot_emulate;
+		}
+
+		c->eip = c->src.val;
+		break;
+	case 0xeb:
+	      jmp:		/* jmp rel short */
+		jmp_rel(c, c->src.val);
+		c->dst.type = OP_NONE; /* Disable writeback. */
+		break;
+	case 0xec: /* in al,dx */
+	case 0xed: /* in (e/r)ax,dx */
+		port = c->regs[VCPU_REGS_RDX];
+		io_dir_in = 1;
+		goto do_io;
+	case 0xee: /* out al,dx */
+	case 0xef: /* out (e/r)ax,dx */
+		port = c->regs[VCPU_REGS_RDX];
+		io_dir_in = 0;
+	do_io:	if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
+				   (c->d & ByteOp) ? 1 : c->op_bytes,
+				   port) != 0) {
+			c->eip = saved_eip;
+			goto cannot_emulate;
+		}
+		break;
+	case 0xf4:              /* hlt */
+		ctxt->vcpu->arch.halt_request = 1;
+		break;
+	case 0xf5:	/* cmc */
+		/* complement carry flag from eflags reg */
+		ctxt->eflags ^= EFLG_CF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xf6 ... 0xf7:	/* Grp3 */
+		rc = emulate_grp3(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
+	case 0xf8: /* clc */
+		ctxt->eflags &= ~EFLG_CF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfa: /* cli */
+		ctxt->eflags &= ~X86_EFLAGS_IF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfb: /* sti */
+		toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
+		ctxt->eflags |= X86_EFLAGS_IF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfc: /* cld */
+		ctxt->eflags &= ~EFLG_DF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfd: /* std */
+		ctxt->eflags |= EFLG_DF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfe ... 0xff:	/* Grp4/Grp5 */
+		rc = emulate_grp45(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
+	}
+
+writeback:
+	rc = writeback(ctxt, ops);
+	if (rc != 0)
+		goto done;
+
+	/* Commit shadow register state. */
+	memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
+	kvm_rip_write(ctxt->vcpu, c->eip);
+
+done:
+	if (rc == X86EMUL_UNHANDLEABLE) {
+		c->eip = saved_eip;
+		return -1;
+	}
+	return 0;
+
+twobyte_insn:
+	switch (c->b) {
+	case 0x01: /* lgdt, lidt, lmsw */
+		switch (c->modrm_reg) {
+			u16 size;
+			unsigned long address;
+
+		case 0: /* vmcall */
+			if (c->modrm_mod != 3 || c->modrm_rm != 1)
+				goto cannot_emulate;
+
+			rc = kvm_fix_hypercall(ctxt->vcpu);
+			if (rc)
+				goto done;
+
+			/* Let the processor re-execute the fixed hypercall */
+			c->eip = kvm_rip_read(ctxt->vcpu);
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		case 2: /* lgdt */
+			rc = read_descriptor(ctxt, ops, c->src.ptr,
+					     &size, &address, c->op_bytes);
+			if (rc)
+				goto done;
+			realmode_lgdt(ctxt->vcpu, size, address);
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		case 3: /* lidt/vmmcall */
+			if (c->modrm_mod == 3) {
+				switch (c->modrm_rm) {
+				case 1:
+					rc = kvm_fix_hypercall(ctxt->vcpu);
+					if (rc)
+						goto done;
+					break;
+				default:
+					goto cannot_emulate;
+				}
+			} else {
+				rc = read_descriptor(ctxt, ops, c->src.ptr,
+						     &size, &address,
+						     c->op_bytes);
+				if (rc)
+					goto done;
+				realmode_lidt(ctxt->vcpu, size, address);
+			}
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		case 4: /* smsw */
+			c->dst.bytes = 2;
+			c->dst.val = realmode_get_cr(ctxt->vcpu, 0);
+			break;
+		case 6: /* lmsw */
+			realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
+				      &ctxt->eflags);
+			c->dst.type = OP_NONE;
+			break;
+		case 7: /* invlpg*/
+			emulate_invlpg(ctxt->vcpu, memop);
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		default:
+			goto cannot_emulate;
+		}
+		break;
+	case 0x05: 		/* syscall */
+		if (emulate_syscall(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
+		break;
+	case 0x06:
+		emulate_clts(ctxt->vcpu);
+		c->dst.type = OP_NONE;
+		break;
+	case 0x08:		/* invd */
+	case 0x09:		/* wbinvd */
+	case 0x0d:		/* GrpP (prefetch) */
+	case 0x18:		/* Grp16 (prefetch/nop) */
+		c->dst.type = OP_NONE;
+		break;
+	case 0x20: /* mov cr, reg */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		c->regs[c->modrm_rm] =
+				realmode_get_cr(ctxt->vcpu, c->modrm_reg);
+		c->dst.type = OP_NONE;	/* no writeback */
+		break;
+	case 0x21: /* mov from dr to reg */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		rc = emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
+		if (rc)
+			goto cannot_emulate;
+		c->dst.type = OP_NONE;	/* no writeback */
+		break;
+	case 0x22: /* mov reg, cr */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		realmode_set_cr(ctxt->vcpu,
+				c->modrm_reg, c->modrm_val, &ctxt->eflags);
+		c->dst.type = OP_NONE;
+		break;
+	case 0x23: /* mov from reg to dr */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		rc = emulator_set_dr(ctxt, c->modrm_reg,
+				     c->regs[c->modrm_rm]);
+		if (rc)
+			goto cannot_emulate;
+		c->dst.type = OP_NONE;	/* no writeback */
+		break;
+	case 0x30:
+		/* wrmsr */
+		msr_data = (u32)c->regs[VCPU_REGS_RAX]
+			| ((u64)c->regs[VCPU_REGS_RDX] << 32);
+		rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
+		if (rc) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			c->eip = kvm_rip_read(ctxt->vcpu);
+		}
+		rc = X86EMUL_CONTINUE;
+		c->dst.type = OP_NONE;
+		break;
+	case 0x32:
+		/* rdmsr */
+		rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
+		if (rc) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			c->eip = kvm_rip_read(ctxt->vcpu);
+		} else {
+			c->regs[VCPU_REGS_RAX] = (u32)msr_data;
+			c->regs[VCPU_REGS_RDX] = msr_data >> 32;
+		}
+		rc = X86EMUL_CONTINUE;
+		c->dst.type = OP_NONE;
+		break;
+	case 0x34:		/* sysenter */
+		if (emulate_sysenter(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
+		break;
+	case 0x35:		/* sysexit */
+		if (emulate_sysexit(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
+		break;
+	case 0x40 ... 0x4f:	/* cmov */
+		c->dst.val = c->dst.orig_val = c->src.val;
+		if (!test_cc(c->b, ctxt->eflags))
+			c->dst.type = OP_NONE; /* no writeback */
+		break;
+	case 0x80 ... 0x8f: /* jnz rel, etc*/
+		if (test_cc(c->b, ctxt->eflags))
+			jmp_rel(c, c->src.val);
+		c->dst.type = OP_NONE;
+		break;
+	case 0xa3:
+	      bt:		/* bt */
+		c->dst.type = OP_NONE;
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("bt", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xa4: /* shld imm8, r, r/m */
+	case 0xa5: /* shld cl, r, r/m */
+		emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xab:
+	      bts:		/* bts */
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xac: /* shrd imm8, r, r/m */
+	case 0xad: /* shrd cl, r, r/m */
+		emulate_2op_cl("shrd", c->src2, c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xae:              /* clflush */
+		break;
+	case 0xb0 ... 0xb1:	/* cmpxchg */
+		/*
+		 * Save real source value, then compare EAX against
+		 * destination.
+		 */
+		c->src.orig_val = c->src.val;
+		c->src.val = c->regs[VCPU_REGS_RAX];
+		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+		if (ctxt->eflags & EFLG_ZF) {
+			/* Success: write back to memory. */
+			c->dst.val = c->src.orig_val;
+		} else {
+			/* Failure: write the value we saw to EAX. */
+			c->dst.type = OP_REG;
+			c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+		}
+		break;
+	case 0xb3:
+	      btr:		/* btr */
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("btr", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xb6 ... 0xb7:	/* movzx */
+		c->dst.bytes = c->op_bytes;
+		c->dst.val = (c->d & ByteOp) ? (u8) c->src.val
+						       : (u16) c->src.val;
+		break;
+	case 0xba:		/* Grp8 */
+		switch (c->modrm_reg & 3) {
+		case 0:
+			goto bt;
+		case 1:
+			goto bts;
+		case 2:
+			goto btr;
+		case 3:
+			goto btc;
+		}
+		break;
+	case 0xbb:
+	      btc:		/* btc */
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("btc", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xbe ... 0xbf:	/* movsx */
+		c->dst.bytes = c->op_bytes;
+		c->dst.val = (c->d & ByteOp) ? (s8) c->src.val :
+							(s16) c->src.val;
+		break;
+	case 0xc3:		/* movnti */
+		c->dst.bytes = c->op_bytes;
+		c->dst.val = (c->op_bytes == 4) ? (u32) c->src.val :
+							(u64) c->src.val;
+		break;
+	case 0xc7:		/* Grp9 (cmpxchg8b) */
+		rc = emulate_grp9(ctxt, ops, memop);
+		if (rc != 0)
+			goto done;
+		c->dst.type = OP_NONE;
+		break;
+	}
+	goto writeback;
+
+cannot_emulate:
+	DPRINTF("Cannot emulate %02x\n", c->b);
+	c->eip = saved_eip;
+	return -1;
+}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1aa7e6d91d4..c0e942747b0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2759,7 +2759,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 	kvm_clear_exception_queue(vcpu);
 	vcpu->arch.mmio_fault_cr2 = cr2;
 	/*
-	 * TODO: fix x86_emulate.c to use guest_read/write_register
+	 * TODO: fix emulate.c to use guest_read/write_register
 	 * instead of direct ->regs accesses, can save hundred cycles
 	 * on Intel for instructions that don't read/change RSP, for
 	 * for example.
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
deleted file mode 100644
index c6663d46f32..00000000000
--- a/arch/x86/kvm/x86_emulate.c
+++ /dev/null
@@ -1,2392 +0,0 @@
-/******************************************************************************
- * x86_emulate.c
- *
- * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
- *
- * Copyright (c) 2005 Keir Fraser
- *
- * Linux coding style, mod r/m decoder, segment base fixes, real-mode
- * privileged instructions:
- *
- * Copyright (C) 2006 Qumranet
- *
- *   Avi Kivity <avi@qumranet.com>
- *   Yaniv Kamay <yaniv@qumranet.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2.  See
- * the COPYING file in the top-level directory.
- *
- * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
- */
-
-#ifndef __KERNEL__
-#include <stdio.h>
-#include <stdint.h>
-#include <public/xen.h>
-#define DPRINTF(_f, _a ...) printf(_f , ## _a)
-#else
-#include <linux/kvm_host.h>
-#include "kvm_cache_regs.h"
-#define DPRINTF(x...) do {} while (0)
-#endif
-#include <linux/module.h>
-#include <asm/kvm_x86_emulate.h>
-
-#include "mmu.h"		/* for is_long_mode() */
-
-/*
- * Opcode effective-address decode tables.
- * Note that we only emulate instructions that have at least one memory
- * operand (excluding implicit stack references). We assume that stack
- * references and instruction fetches will never occur in special memory
- * areas that require emulation. So, for example, 'mov <imm>,<reg>' need
- * not be handled.
- */
-
-/* Operand sizes: 8-bit operands or specified/overridden size. */
-#define ByteOp      (1<<0)	/* 8-bit operands. */
-/* Destination operand type. */
-#define ImplicitOps (1<<1)	/* Implicit in opcode. No generic decode. */
-#define DstReg      (2<<1)	/* Register operand. */
-#define DstMem      (3<<1)	/* Memory operand. */
-#define DstAcc      (4<<1)      /* Destination Accumulator */
-#define DstMask     (7<<1)
-/* Source operand type. */
-#define SrcNone     (0<<4)	/* No source operand. */
-#define SrcImplicit (0<<4)	/* Source operand is implicit in the opcode. */
-#define SrcReg      (1<<4)	/* Register operand. */
-#define SrcMem      (2<<4)	/* Memory operand. */
-#define SrcMem16    (3<<4)	/* Memory operand (16-bit). */
-#define SrcMem32    (4<<4)	/* Memory operand (32-bit). */
-#define SrcImm      (5<<4)	/* Immediate operand. */
-#define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
-#define SrcOne      (7<<4)	/* Implied '1' */
-#define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
-#define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
-#define SrcMask     (0xf<<4)
-/* Generic ModRM decode. */
-#define ModRM       (1<<8)
-/* Destination is only written; never read. */
-#define Mov         (1<<9)
-#define BitOp       (1<<10)
-#define MemAbs      (1<<11)      /* Memory operand is absolute displacement */
-#define String      (1<<12)     /* String instruction (rep capable) */
-#define Stack       (1<<13)     /* Stack instruction (push/pop) */
-#define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
-#define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
-#define GroupMask   0xff        /* Group number stored in bits 0:7 */
-/* Source 2 operand type */
-#define Src2None    (0<<29)
-#define Src2CL      (1<<29)
-#define Src2ImmByte (2<<29)
-#define Src2One     (3<<29)
-#define Src2Imm16   (4<<29)
-#define Src2Mask    (7<<29)
-
-enum {
-	Group1_80, Group1_81, Group1_82, Group1_83,
-	Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
-};
-
-static u32 opcode_table[256] = {
-	/* 0x00 - 0x07 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
-	/* 0x08 - 0x0F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x10 - 0x17 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x18 - 0x1F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x20 - 0x27 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
-	/* 0x28 - 0x2F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x30 - 0x37 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x38 - 0x3F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
-	0, 0,
-	/* 0x40 - 0x47 */
-	DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
-	/* 0x48 - 0x4F */
-	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
-	/* 0x50 - 0x57 */
-	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
-	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
-	/* 0x58 - 0x5F */
-	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
-	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
-	/* 0x60 - 0x67 */
-	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
-	0, 0, 0, 0,
-	/* 0x68 - 0x6F */
-	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
-	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
-	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
-	/* 0x70 - 0x77 */
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	/* 0x78 - 0x7F */
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	/* 0x80 - 0x87 */
-	Group | Group1_80, Group | Group1_81,
-	Group | Group1_82, Group | Group1_83,
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	/* 0x88 - 0x8F */
-	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
-	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
-	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
-	/* 0x90 - 0x97 */
-	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
-	/* 0x98 - 0x9F */
-	0, 0, SrcImm | Src2Imm16, 0,
-	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
-	/* 0xA0 - 0xA7 */
-	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
-	ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
-	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | String, ImplicitOps | String,
-	/* 0xA8 - 0xAF */
-	0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | String, ImplicitOps | String,
-	/* 0xB0 - 0xB7 */
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	/* 0xB8 - 0xBF */
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	/* 0xC0 - 0xC7 */
-	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
-	0, ImplicitOps | Stack, 0, 0,
-	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
-	/* 0xC8 - 0xCF */
-	0, 0, 0, ImplicitOps | Stack,
-	ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
-	/* 0xD0 - 0xD7 */
-	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
-	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
-	0, 0, 0, 0,
-	/* 0xD8 - 0xDF */
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xE0 - 0xE7 */
-	0, 0, 0, 0,
-	ByteOp | SrcImmUByte, SrcImmUByte,
-	ByteOp | SrcImmUByte, SrcImmUByte,
-	/* 0xE8 - 0xEF */
-	SrcImm | Stack, SrcImm | ImplicitOps,
-	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
-	/* 0xF0 - 0xF7 */
-	0, 0, 0, 0,
-	ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
-	/* 0xF8 - 0xFF */
-	ImplicitOps, 0, ImplicitOps, ImplicitOps,
-	ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
-};
-
-static u32 twobyte_table[256] = {
-	/* 0x00 - 0x0F */
-	0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
-	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
-	/* 0x10 - 0x1F */
-	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x20 - 0x2F */
-	ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x30 - 0x3F */
-	ImplicitOps, 0, ImplicitOps, 0,
-	ImplicitOps, ImplicitOps, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x40 - 0x47 */
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	/* 0x48 - 0x4F */
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	/* 0x50 - 0x5F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x60 - 0x6F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x70 - 0x7F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x80 - 0x8F */
-	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
-	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
-	/* 0x90 - 0x9F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xA0 - 0xA7 */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
-	DstMem | SrcReg | Src2ImmByte | ModRM,
-	DstMem | SrcReg | Src2CL | ModRM, 0, 0,
-	/* 0xA8 - 0xAF */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
-	DstMem | SrcReg | Src2ImmByte | ModRM,
-	DstMem | SrcReg | Src2CL | ModRM,
-	ModRM, 0,
-	/* 0xB0 - 0xB7 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
-	    DstMem | SrcReg | ModRM | BitOp,
-	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
-	    DstReg | SrcMem16 | ModRM | Mov,
-	/* 0xB8 - 0xBF */
-	0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
-	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
-	    DstReg | SrcMem16 | ModRM | Mov,
-	/* 0xC0 - 0xCF */
-	0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xD0 - 0xDF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xE0 - 0xEF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xF0 - 0xFF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-static u32 group_table[] = {
-	[Group1_80*8] =
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	[Group1_81*8] =
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	[Group1_82*8] =
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	[Group1_83*8] =
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	[Group1A*8] =
-	DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
-	[Group3_Byte*8] =
-	ByteOp | SrcImm | DstMem | ModRM, 0,
-	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
-	0, 0, 0, 0,
-	[Group3*8] =
-	DstMem | SrcImm | ModRM, 0,
-	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
-	0, 0, 0, 0,
-	[Group4*8] =
-	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
-	0, 0, 0, 0, 0, 0,
-	[Group5*8] =
-	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
-	SrcMem | ModRM | Stack, 0,
-	SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
-	[Group7*8] =
-	0, 0, ModRM | SrcMem, ModRM | SrcMem,
-	SrcNone | ModRM | DstMem | Mov, 0,
-	SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
-};
-
-static u32 group2_table[] = {
-	[Group7*8] =
-	SrcNone | ModRM, 0, 0, SrcNone | ModRM,
-	SrcNone | ModRM | DstMem | Mov, 0,
-	SrcMem16 | ModRM | Mov, 0,
-};
-
-/* EFLAGS bit definitions. */
-#define EFLG_VM (1<<17)
-#define EFLG_RF (1<<16)
-#define EFLG_OF (1<<11)
-#define EFLG_DF (1<<10)
-#define EFLG_IF (1<<9)
-#define EFLG_SF (1<<7)
-#define EFLG_ZF (1<<6)
-#define EFLG_AF (1<<4)
-#define EFLG_PF (1<<2)
-#define EFLG_CF (1<<0)
-
-/*
- * Instruction emulation:
- * Most instructions are emulated directly via a fragment of inline assembly
- * code. This allows us to save/restore EFLAGS and thus very easily pick up
- * any modified flags.
- */
-
-#if defined(CONFIG_X86_64)
-#define _LO32 "k"		/* force 32-bit operand */
-#define _STK  "%%rsp"		/* stack pointer */
-#elif defined(__i386__)
-#define _LO32 ""		/* force 32-bit operand */
-#define _STK  "%%esp"		/* stack pointer */
-#endif
-
-/*
- * These EFLAGS bits are restored from saved value during emulation, and
- * any changes are written back to the saved value after emulation.
- */
-#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
-
-/* Before executing instruction: restore necessary bits in EFLAGS. */
-#define _PRE_EFLAGS(_sav, _msk, _tmp)					\
-	/* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
-	"movl %"_sav",%"_LO32 _tmp"; "                                  \
-	"push %"_tmp"; "                                                \
-	"push %"_tmp"; "                                                \
-	"movl %"_msk",%"_LO32 _tmp"; "                                  \
-	"andl %"_LO32 _tmp",("_STK"); "                                 \
-	"pushf; "                                                       \
-	"notl %"_LO32 _tmp"; "                                          \
-	"andl %"_LO32 _tmp",("_STK"); "                                 \
-	"andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); "	\
-	"pop  %"_tmp"; "                                                \
-	"orl  %"_LO32 _tmp",("_STK"); "                                 \
-	"popf; "                                                        \
-	"pop  %"_sav"; "
-
-/* After executing instruction: write-back necessary bits in EFLAGS. */
-#define _POST_EFLAGS(_sav, _msk, _tmp) \
-	/* _sav |= EFLAGS & _msk; */		\
-	"pushf; "				\
-	"pop  %"_tmp"; "			\
-	"andl %"_msk",%"_LO32 _tmp"; "		\
-	"orl  %"_LO32 _tmp",%"_sav"; "
-
-#ifdef CONFIG_X86_64
-#define ON64(x) x
-#else
-#define ON64(x)
-#endif
-
-#define ____emulate_2op(_op, _src, _dst, _eflags, _x, _y, _suffix)	\
-	do {								\
-		__asm__ __volatile__ (					\
-			_PRE_EFLAGS("0", "4", "2")			\
-			_op _suffix " %"_x"3,%1; "			\
-			_POST_EFLAGS("0", "4", "2")			\
-			: "=m" (_eflags), "=m" ((_dst).val),		\
-			  "=&r" (_tmp)					\
-			: _y ((_src).val), "i" (EFLAGS_MASK));		\
-	} while (0)
-
-
-/* Raw emulation: instruction has two explicit operands. */
-#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
-	do {								\
-		unsigned long _tmp;					\
-									\
-		switch ((_dst).bytes) {					\
-		case 2:							\
-			____emulate_2op(_op,_src,_dst,_eflags,_wx,_wy,"w"); \
-			break;						\
-		case 4:							\
-			____emulate_2op(_op,_src,_dst,_eflags,_lx,_ly,"l"); \
-			break;						\
-		case 8:							\
-			ON64(____emulate_2op(_op,_src,_dst,_eflags,_qx,_qy,"q")); \
-			break;						\
-		}							\
-	} while (0)
-
-#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
-	do {								     \
-		unsigned long _tmp;					     \
-		switch ((_dst).bytes) {				             \
-		case 1:							     \
-			____emulate_2op(_op,_src,_dst,_eflags,_bx,_by,"b");  \
-			break;						     \
-		default:						     \
-			__emulate_2op_nobyte(_op, _src, _dst, _eflags,	     \
-					     _wx, _wy, _lx, _ly, _qx, _qy);  \
-			break;						     \
-		}							     \
-	} while (0)
-
-/* Source operand is byte-sized and may be restricted to just %cl. */
-#define emulate_2op_SrcB(_op, _src, _dst, _eflags)                      \
-	__emulate_2op(_op, _src, _dst, _eflags,				\
-		      "b", "c", "b", "c", "b", "c", "b", "c")
-
-/* Source operand is byte, word, long or quad sized. */
-#define emulate_2op_SrcV(_op, _src, _dst, _eflags)                      \
-	__emulate_2op(_op, _src, _dst, _eflags,				\
-		      "b", "q", "w", "r", _LO32, "r", "", "r")
-
-/* Source operand is word, long or quad sized. */
-#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags)               \
-	__emulate_2op_nobyte(_op, _src, _dst, _eflags,			\
-			     "w", "r", _LO32, "r", "", "r")
-
-/* Instruction has three operands and one operand is stored in ECX register */
-#define __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, _suffix, _type) 	\
-	do {									\
-		unsigned long _tmp;						\
-		_type _clv  = (_cl).val;  					\
-		_type _srcv = (_src).val;    					\
-		_type _dstv = (_dst).val;					\
-										\
-		__asm__ __volatile__ (						\
-			_PRE_EFLAGS("0", "5", "2")				\
-			_op _suffix " %4,%1 \n"					\
-			_POST_EFLAGS("0", "5", "2")				\
-			: "=m" (_eflags), "+r" (_dstv), "=&r" (_tmp)		\
-			: "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK)		\
-			); 							\
-										\
-		(_cl).val  = (unsigned long) _clv;				\
-		(_src).val = (unsigned long) _srcv;				\
-		(_dst).val = (unsigned long) _dstv;				\
-	} while (0)
-
-#define emulate_2op_cl(_op, _cl, _src, _dst, _eflags)				\
-	do {									\
-		switch ((_dst).bytes) {						\
-		case 2:								\
-			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
-						"w", unsigned short);         	\
-			break;							\
-		case 4: 							\
-			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
-						"l", unsigned int);           	\
-			break;							\
-		case 8:								\
-			ON64(__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,	\
-						"q", unsigned long));  		\
-			break;							\
-		}								\
-	} while (0)
-
-#define __emulate_1op(_op, _dst, _eflags, _suffix)			\
-	do {								\
-		unsigned long _tmp;					\
-									\
-		__asm__ __volatile__ (					\
-			_PRE_EFLAGS("0", "3", "2")			\
-			_op _suffix " %1; "				\
-			_POST_EFLAGS("0", "3", "2")			\
-			: "=m" (_eflags), "+m" ((_dst).val),		\
-			  "=&r" (_tmp)					\
-			: "i" (EFLAGS_MASK));				\
-	} while (0)
-
-/* Instruction has only one explicit operand (no source operand). */
-#define emulate_1op(_op, _dst, _eflags)                                    \
-	do {								\
-		switch ((_dst).bytes) {				        \
-		case 1:	__emulate_1op(_op, _dst, _eflags, "b"); break;	\
-		case 2:	__emulate_1op(_op, _dst, _eflags, "w"); break;	\
-		case 4:	__emulate_1op(_op, _dst, _eflags, "l"); break;	\
-		case 8:	ON64(__emulate_1op(_op, _dst, _eflags, "q")); break; \
-		}							\
-	} while (0)
-
-/* Fetch next part of the instruction being emulated. */
-#define insn_fetch(_type, _size, _eip)                                  \
-({	unsigned long _x;						\
-	rc = do_insn_fetch(ctxt, ops, (_eip), &_x, (_size));		\
-	if (rc != 0)							\
-		goto done;						\
-	(_eip) += (_size);						\
-	(_type)_x;							\
-})
-
-static inline unsigned long ad_mask(struct decode_cache *c)
-{
-	return (1UL << (c->ad_bytes << 3)) - 1;
-}
-
-/* Access/update address held in a register, based on addressing mode. */
-static inline unsigned long
-address_mask(struct decode_cache *c, unsigned long reg)
-{
-	if (c->ad_bytes == sizeof(unsigned long))
-		return reg;
-	else
-		return reg & ad_mask(c);
-}
-
-static inline unsigned long
-register_address(struct decode_cache *c, unsigned long base, unsigned long reg)
-{
-	return base + address_mask(c, reg);
-}
-
-static inline void
-register_address_increment(struct decode_cache *c, unsigned long *reg, int inc)
-{
-	if (c->ad_bytes == sizeof(unsigned long))
-		*reg += inc;
-	else
-		*reg = (*reg & ~ad_mask(c)) | ((*reg + inc) & ad_mask(c));
-}
-
-static inline void jmp_rel(struct decode_cache *c, int rel)
-{
-	register_address_increment(c, &c->eip, rel);
-}
-
-static void set_seg_override(struct decode_cache *c, int seg)
-{
-	c->has_seg_override = true;
-	c->seg_override = seg;
-}
-
-static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
-{
-	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
-		return 0;
-
-	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
-}
-
-static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
-				       struct decode_cache *c)
-{
-	if (!c->has_seg_override)
-		return 0;
-
-	return seg_base(ctxt, c->seg_override);
-}
-
-static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
-{
-	return seg_base(ctxt, VCPU_SREG_ES);
-}
-
-static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
-{
-	return seg_base(ctxt, VCPU_SREG_SS);
-}
-
-static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
-			      struct x86_emulate_ops *ops,
-			      unsigned long linear, u8 *dest)
-{
-	struct fetch_cache *fc = &ctxt->decode.fetch;
-	int rc;
-	int size;
-
-	if (linear < fc->start || linear >= fc->end) {
-		size = min(15UL, PAGE_SIZE - offset_in_page(linear));
-		rc = ops->read_std(linear, fc->data, size, ctxt->vcpu);
-		if (rc)
-			return rc;
-		fc->start = linear;
-		fc->end = linear + size;
-	}
-	*dest = fc->data[linear - fc->start];
-	return 0;
-}
-
-static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
-			 struct x86_emulate_ops *ops,
-			 unsigned long eip, void *dest, unsigned size)
-{
-	int rc = 0;
-
-	eip += ctxt->cs_base;
-	while (size--) {
-		rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
-		if (rc)
-			return rc;
-	}
-	return 0;
-}
-
-/*
- * Given the 'reg' portion of a ModRM byte, and a register block, return a
- * pointer into the block that addresses the relevant register.
- * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
- */
-static void *decode_register(u8 modrm_reg, unsigned long *regs,
-			     int highbyte_regs)
-{
-	void *p;
-
-	p = &regs[modrm_reg];
-	if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
-		p = (unsigned char *)&regs[modrm_reg & 3] + 1;
-	return p;
-}
-
-static int read_descriptor(struct x86_emulate_ctxt *ctxt,
-			   struct x86_emulate_ops *ops,
-			   void *ptr,
-			   u16 *size, unsigned long *address, int op_bytes)
-{
-	int rc;
-
-	if (op_bytes == 2)
-		op_bytes = 3;
-	*address = 0;
-	rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2,
-			   ctxt->vcpu);
-	if (rc)
-		return rc;
-	rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes,
-			   ctxt->vcpu);
-	return rc;
-}
-
-static int test_cc(unsigned int condition, unsigned int flags)
-{
-	int rc = 0;
-
-	switch ((condition & 15) >> 1) {
-	case 0: /* o */
-		rc |= (flags & EFLG_OF);
-		break;
-	case 1: /* b/c/nae */
-		rc |= (flags & EFLG_CF);
-		break;
-	case 2: /* z/e */
-		rc |= (flags & EFLG_ZF);
-		break;
-	case 3: /* be/na */
-		rc |= (flags & (EFLG_CF|EFLG_ZF));
-		break;
-	case 4: /* s */
-		rc |= (flags & EFLG_SF);
-		break;
-	case 5: /* p/pe */
-		rc |= (flags & EFLG_PF);
-		break;
-	case 7: /* le/ng */
-		rc |= (flags & EFLG_ZF);
-		/* fall through */
-	case 6: /* l/nge */
-		rc |= (!(flags & EFLG_SF) != !(flags & EFLG_OF));
-		break;
-	}
-
-	/* Odd condition identifiers (lsb == 1) have inverted sense. */
-	return (!!rc ^ (condition & 1));
-}
-
-static void decode_register_operand(struct operand *op,
-				    struct decode_cache *c,
-				    int inhibit_bytereg)
-{
-	unsigned reg = c->modrm_reg;
-	int highbyte_regs = c->rex_prefix == 0;
-
-	if (!(c->d & ModRM))
-		reg = (c->b & 7) | ((c->rex_prefix & 1) << 3);
-	op->type = OP_REG;
-	if ((c->d & ByteOp) && !inhibit_bytereg) {
-		op->ptr = decode_register(reg, c->regs, highbyte_regs);
-		op->val = *(u8 *)op->ptr;
-		op->bytes = 1;
-	} else {
-		op->ptr = decode_register(reg, c->regs, 0);
-		op->bytes = c->op_bytes;
-		switch (op->bytes) {
-		case 2:
-			op->val = *(u16 *)op->ptr;
-			break;
-		case 4:
-			op->val = *(u32 *)op->ptr;
-			break;
-		case 8:
-			op->val = *(u64 *) op->ptr;
-			break;
-		}
-	}
-	op->orig_val = op->val;
-}
-
-static int decode_modrm(struct x86_emulate_ctxt *ctxt,
-			struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	u8 sib;
-	int index_reg = 0, base_reg = 0, scale;
-	int rc = 0;
-
-	if (c->rex_prefix) {
-		c->modrm_reg = (c->rex_prefix & 4) << 1;	/* REX.R */
-		index_reg = (c->rex_prefix & 2) << 2; /* REX.X */
-		c->modrm_rm = base_reg = (c->rex_prefix & 1) << 3; /* REG.B */
-	}
-
-	c->modrm = insn_fetch(u8, 1, c->eip);
-	c->modrm_mod |= (c->modrm & 0xc0) >> 6;
-	c->modrm_reg |= (c->modrm & 0x38) >> 3;
-	c->modrm_rm |= (c->modrm & 0x07);
-	c->modrm_ea = 0;
-	c->use_modrm_ea = 1;
-
-	if (c->modrm_mod == 3) {
-		c->modrm_ptr = decode_register(c->modrm_rm,
-					       c->regs, c->d & ByteOp);
-		c->modrm_val = *(unsigned long *)c->modrm_ptr;
-		return rc;
-	}
-
-	if (c->ad_bytes == 2) {
-		unsigned bx = c->regs[VCPU_REGS_RBX];
-		unsigned bp = c->regs[VCPU_REGS_RBP];
-		unsigned si = c->regs[VCPU_REGS_RSI];
-		unsigned di = c->regs[VCPU_REGS_RDI];
-
-		/* 16-bit ModR/M decode. */
-		switch (c->modrm_mod) {
-		case 0:
-			if (c->modrm_rm == 6)
-				c->modrm_ea += insn_fetch(u16, 2, c->eip);
-			break;
-		case 1:
-			c->modrm_ea += insn_fetch(s8, 1, c->eip);
-			break;
-		case 2:
-			c->modrm_ea += insn_fetch(u16, 2, c->eip);
-			break;
-		}
-		switch (c->modrm_rm) {
-		case 0:
-			c->modrm_ea += bx + si;
-			break;
-		case 1:
-			c->modrm_ea += bx + di;
-			break;
-		case 2:
-			c->modrm_ea += bp + si;
-			break;
-		case 3:
-			c->modrm_ea += bp + di;
-			break;
-		case 4:
-			c->modrm_ea += si;
-			break;
-		case 5:
-			c->modrm_ea += di;
-			break;
-		case 6:
-			if (c->modrm_mod != 0)
-				c->modrm_ea += bp;
-			break;
-		case 7:
-			c->modrm_ea += bx;
-			break;
-		}
-		if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
-		    (c->modrm_rm == 6 && c->modrm_mod != 0))
-			if (!c->has_seg_override)
-				set_seg_override(c, VCPU_SREG_SS);
-		c->modrm_ea = (u16)c->modrm_ea;
-	} else {
-		/* 32/64-bit ModR/M decode. */
-		if ((c->modrm_rm & 7) == 4) {
-			sib = insn_fetch(u8, 1, c->eip);
-			index_reg |= (sib >> 3) & 7;
-			base_reg |= sib & 7;
-			scale = sib >> 6;
-
-			if ((base_reg & 7) == 5 && c->modrm_mod == 0)
-				c->modrm_ea += insn_fetch(s32, 4, c->eip);
-			else
-				c->modrm_ea += c->regs[base_reg];
-			if (index_reg != 4)
-				c->modrm_ea += c->regs[index_reg] << scale;
-		} else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
-			if (ctxt->mode == X86EMUL_MODE_PROT64)
-				c->rip_relative = 1;
-		} else
-			c->modrm_ea += c->regs[c->modrm_rm];
-		switch (c->modrm_mod) {
-		case 0:
-			if (c->modrm_rm == 5)
-				c->modrm_ea += insn_fetch(s32, 4, c->eip);
-			break;
-		case 1:
-			c->modrm_ea += insn_fetch(s8, 1, c->eip);
-			break;
-		case 2:
-			c->modrm_ea += insn_fetch(s32, 4, c->eip);
-			break;
-		}
-	}
-done:
-	return rc;
-}
-
-static int decode_abs(struct x86_emulate_ctxt *ctxt,
-		      struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
-
-	switch (c->ad_bytes) {
-	case 2:
-		c->modrm_ea = insn_fetch(u16, 2, c->eip);
-		break;
-	case 4:
-		c->modrm_ea = insn_fetch(u32, 4, c->eip);
-		break;
-	case 8:
-		c->modrm_ea = insn_fetch(u64, 8, c->eip);
-		break;
-	}
-done:
-	return rc;
-}
-
-int
-x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
-	int mode = ctxt->mode;
-	int def_op_bytes, def_ad_bytes, group;
-
-	/* Shadow copy of register state. Committed on successful emulation. */
-
-	memset(c, 0, sizeof(struct decode_cache));
-	c->eip = kvm_rip_read(ctxt->vcpu);
-	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
-	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
-
-	switch (mode) {
-	case X86EMUL_MODE_REAL:
-	case X86EMUL_MODE_PROT16:
-		def_op_bytes = def_ad_bytes = 2;
-		break;
-	case X86EMUL_MODE_PROT32:
-		def_op_bytes = def_ad_bytes = 4;
-		break;
-#ifdef CONFIG_X86_64
-	case X86EMUL_MODE_PROT64:
-		def_op_bytes = 4;
-		def_ad_bytes = 8;
-		break;
-#endif
-	default:
-		return -1;
-	}
-
-	c->op_bytes = def_op_bytes;
-	c->ad_bytes = def_ad_bytes;
-
-	/* Legacy prefixes. */
-	for (;;) {
-		switch (c->b = insn_fetch(u8, 1, c->eip)) {
-		case 0x66:	/* operand-size override */
-			/* switch between 2/4 bytes */
-			c->op_bytes = def_op_bytes ^ 6;
-			break;
-		case 0x67:	/* address-size override */
-			if (mode == X86EMUL_MODE_PROT64)
-				/* switch between 4/8 bytes */
-				c->ad_bytes = def_ad_bytes ^ 12;
-			else
-				/* switch between 2/4 bytes */
-				c->ad_bytes = def_ad_bytes ^ 6;
-			break;
-		case 0x26:	/* ES override */
-		case 0x2e:	/* CS override */
-		case 0x36:	/* SS override */
-		case 0x3e:	/* DS override */
-			set_seg_override(c, (c->b >> 3) & 3);
-			break;
-		case 0x64:	/* FS override */
-		case 0x65:	/* GS override */
-			set_seg_override(c, c->b & 7);
-			break;
-		case 0x40 ... 0x4f: /* REX */
-			if (mode != X86EMUL_MODE_PROT64)
-				goto done_prefixes;
-			c->rex_prefix = c->b;
-			continue;
-		case 0xf0:	/* LOCK */
-			c->lock_prefix = 1;
-			break;
-		case 0xf2:	/* REPNE/REPNZ */
-			c->rep_prefix = REPNE_PREFIX;
-			break;
-		case 0xf3:	/* REP/REPE/REPZ */
-			c->rep_prefix = REPE_PREFIX;
-			break;
-		default:
-			goto done_prefixes;
-		}
-
-		/* Any legacy prefix after a REX prefix nullifies its effect. */
-
-		c->rex_prefix = 0;
-	}
-
-done_prefixes:
-
-	/* REX prefix. */
-	if (c->rex_prefix)
-		if (c->rex_prefix & 8)
-			c->op_bytes = 8;	/* REX.W */
-
-	/* Opcode byte(s). */
-	c->d = opcode_table[c->b];
-	if (c->d == 0) {
-		/* Two-byte opcode? */
-		if (c->b == 0x0f) {
-			c->twobyte = 1;
-			c->b = insn_fetch(u8, 1, c->eip);
-			c->d = twobyte_table[c->b];
-		}
-	}
-
-	if (c->d & Group) {
-		group = c->d & GroupMask;
-		c->modrm = insn_fetch(u8, 1, c->eip);
-		--c->eip;
-
-		group = (group << 3) + ((c->modrm >> 3) & 7);
-		if ((c->d & GroupDual) && (c->modrm >> 6) == 3)
-			c->d = group2_table[group];
-		else
-			c->d = group_table[group];
-	}
-
-	/* Unrecognised? */
-	if (c->d == 0) {
-		DPRINTF("Cannot emulate %02x\n", c->b);
-		return -1;
-	}
-
-	if (mode == X86EMUL_MODE_PROT64 && (c->d & Stack))
-		c->op_bytes = 8;
-
-	/* ModRM and SIB bytes. */
-	if (c->d & ModRM)
-		rc = decode_modrm(ctxt, ops);
-	else if (c->d & MemAbs)
-		rc = decode_abs(ctxt, ops);
-	if (rc)
-		goto done;
-
-	if (!c->has_seg_override)
-		set_seg_override(c, VCPU_SREG_DS);
-
-	if (!(!c->twobyte && c->b == 0x8d))
-		c->modrm_ea += seg_override_base(ctxt, c);
-
-	if (c->ad_bytes != 8)
-		c->modrm_ea = (u32)c->modrm_ea;
-	/*
-	 * Decode and fetch the source operand: register, memory
-	 * or immediate.
-	 */
-	switch (c->d & SrcMask) {
-	case SrcNone:
-		break;
-	case SrcReg:
-		decode_register_operand(&c->src, c, 0);
-		break;
-	case SrcMem16:
-		c->src.bytes = 2;
-		goto srcmem_common;
-	case SrcMem32:
-		c->src.bytes = 4;
-		goto srcmem_common;
-	case SrcMem:
-		c->src.bytes = (c->d & ByteOp) ? 1 :
-							   c->op_bytes;
-		/* Don't fetch the address for invlpg: it could be unmapped. */
-		if (c->twobyte && c->b == 0x01 && c->modrm_reg == 7)
-			break;
-	srcmem_common:
-		/*
-		 * For instructions with a ModR/M byte, switch to register
-		 * access if Mod = 3.
-		 */
-		if ((c->d & ModRM) && c->modrm_mod == 3) {
-			c->src.type = OP_REG;
-			c->src.val = c->modrm_val;
-			c->src.ptr = c->modrm_ptr;
-			break;
-		}
-		c->src.type = OP_MEM;
-		break;
-	case SrcImm:
-	case SrcImmU:
-		c->src.type = OP_IMM;
-		c->src.ptr = (unsigned long *)c->eip;
-		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		if (c->src.bytes == 8)
-			c->src.bytes = 4;
-		/* NB. Immediates are sign-extended as necessary. */
-		switch (c->src.bytes) {
-		case 1:
-			c->src.val = insn_fetch(s8, 1, c->eip);
-			break;
-		case 2:
-			c->src.val = insn_fetch(s16, 2, c->eip);
-			break;
-		case 4:
-			c->src.val = insn_fetch(s32, 4, c->eip);
-			break;
-		}
-		if ((c->d & SrcMask) == SrcImmU) {
-			switch (c->src.bytes) {
-			case 1:
-				c->src.val &= 0xff;
-				break;
-			case 2:
-				c->src.val &= 0xffff;
-				break;
-			case 4:
-				c->src.val &= 0xffffffff;
-				break;
-			}
-		}
-		break;
-	case SrcImmByte:
-	case SrcImmUByte:
-		c->src.type = OP_IMM;
-		c->src.ptr = (unsigned long *)c->eip;
-		c->src.bytes = 1;
-		if ((c->d & SrcMask) == SrcImmByte)
-			c->src.val = insn_fetch(s8, 1, c->eip);
-		else
-			c->src.val = insn_fetch(u8, 1, c->eip);
-		break;
-	case SrcOne:
-		c->src.bytes = 1;
-		c->src.val = 1;
-		break;
-	}
-
-	/*
-	 * Decode and fetch the second source operand: register, memory
-	 * or immediate.
-	 */
-	switch (c->d & Src2Mask) {
-	case Src2None:
-		break;
-	case Src2CL:
-		c->src2.bytes = 1;
-		c->src2.val = c->regs[VCPU_REGS_RCX] & 0x8;
-		break;
-	case Src2ImmByte:
-		c->src2.type = OP_IMM;
-		c->src2.ptr = (unsigned long *)c->eip;
-		c->src2.bytes = 1;
-		c->src2.val = insn_fetch(u8, 1, c->eip);
-		break;
-	case Src2Imm16:
-		c->src2.type = OP_IMM;
-		c->src2.ptr = (unsigned long *)c->eip;
-		c->src2.bytes = 2;
-		c->src2.val = insn_fetch(u16, 2, c->eip);
-		break;
-	case Src2One:
-		c->src2.bytes = 1;
-		c->src2.val = 1;
-		break;
-	}
-
-	/* Decode and fetch the destination operand: register or memory. */
-	switch (c->d & DstMask) {
-	case ImplicitOps:
-		/* Special instructions do their own operand decoding. */
-		return 0;
-	case DstReg:
-		decode_register_operand(&c->dst, c,
-			 c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
-		break;
-	case DstMem:
-		if ((c->d & ModRM) && c->modrm_mod == 3) {
-			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-			c->dst.type = OP_REG;
-			c->dst.val = c->dst.orig_val = c->modrm_val;
-			c->dst.ptr = c->modrm_ptr;
-			break;
-		}
-		c->dst.type = OP_MEM;
-		break;
-	case DstAcc:
-		c->dst.type = OP_REG;
-		c->dst.bytes = c->op_bytes;
-		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
-		switch (c->op_bytes) {
-			case 1:
-				c->dst.val = *(u8 *)c->dst.ptr;
-				break;
-			case 2:
-				c->dst.val = *(u16 *)c->dst.ptr;
-				break;
-			case 4:
-				c->dst.val = *(u32 *)c->dst.ptr;
-				break;
-		}
-		c->dst.orig_val = c->dst.val;
-		break;
-	}
-
-	if (c->rip_relative)
-		c->modrm_ea += c->eip;
-
-done:
-	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
-}
-
-static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-
-	c->dst.type  = OP_MEM;
-	c->dst.bytes = c->op_bytes;
-	c->dst.val = c->src.val;
-	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
-	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
-					       c->regs[VCPU_REGS_RSP]);
-}
-
-static int emulate_pop(struct x86_emulate_ctxt *ctxt,
-		       struct x86_emulate_ops *ops,
-		       void *dest, int len)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc;
-
-	rc = ops->read_emulated(register_address(c, ss_base(ctxt),
-						 c->regs[VCPU_REGS_RSP]),
-				dest, len, ctxt->vcpu);
-	if (rc != 0)
-		return rc;
-
-	register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
-	return rc;
-}
-
-static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
-				struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc;
-
-	rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
-	if (rc != 0)
-		return rc;
-	return 0;
-}
-
-static inline void emulate_grp2(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	switch (c->modrm_reg) {
-	case 0:	/* rol */
-		emulate_2op_SrcB("rol", c->src, c->dst, ctxt->eflags);
-		break;
-	case 1:	/* ror */
-		emulate_2op_SrcB("ror", c->src, c->dst, ctxt->eflags);
-		break;
-	case 2:	/* rcl */
-		emulate_2op_SrcB("rcl", c->src, c->dst, ctxt->eflags);
-		break;
-	case 3:	/* rcr */
-		emulate_2op_SrcB("rcr", c->src, c->dst, ctxt->eflags);
-		break;
-	case 4:	/* sal/shl */
-	case 6:	/* sal/shl */
-		emulate_2op_SrcB("sal", c->src, c->dst, ctxt->eflags);
-		break;
-	case 5:	/* shr */
-		emulate_2op_SrcB("shr", c->src, c->dst, ctxt->eflags);
-		break;
-	case 7:	/* sar */
-		emulate_2op_SrcB("sar", c->src, c->dst, ctxt->eflags);
-		break;
-	}
-}
-
-static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
-			       struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
-
-	switch (c->modrm_reg) {
-	case 0 ... 1:	/* test */
-		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
-		break;
-	case 2:	/* not */
-		c->dst.val = ~c->dst.val;
-		break;
-	case 3:	/* neg */
-		emulate_1op("neg", c->dst, ctxt->eflags);
-		break;
-	default:
-		DPRINTF("Cannot emulate %02x\n", c->b);
-		rc = X86EMUL_UNHANDLEABLE;
-		break;
-	}
-	return rc;
-}
-
-static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
-			       struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-
-	switch (c->modrm_reg) {
-	case 0:	/* inc */
-		emulate_1op("inc", c->dst, ctxt->eflags);
-		break;
-	case 1:	/* dec */
-		emulate_1op("dec", c->dst, ctxt->eflags);
-		break;
-	case 2: /* call near abs */ {
-		long int old_eip;
-		old_eip = c->eip;
-		c->eip = c->src.val;
-		c->src.val = old_eip;
-		emulate_push(ctxt);
-		break;
-	}
-	case 4: /* jmp abs */
-		c->eip = c->src.val;
-		break;
-	case 6:	/* push */
-		emulate_push(ctxt);
-		break;
-	}
-	return 0;
-}
-
-static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
-			       struct x86_emulate_ops *ops,
-			       unsigned long memop)
-{
-	struct decode_cache *c = &ctxt->decode;
-	u64 old, new;
-	int rc;
-
-	rc = ops->read_emulated(memop, &old, 8, ctxt->vcpu);
-	if (rc != 0)
-		return rc;
-
-	if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
-	    ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
-
-		c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
-		c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
-		ctxt->eflags &= ~EFLG_ZF;
-
-	} else {
-		new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
-		       (u32) c->regs[VCPU_REGS_RBX];
-
-		rc = ops->cmpxchg_emulated(memop, &old, &new, 8, ctxt->vcpu);
-		if (rc != 0)
-			return rc;
-		ctxt->eflags |= EFLG_ZF;
-	}
-	return 0;
-}
-
-static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
-			   struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc;
-	unsigned long cs;
-
-	rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
-	if (rc)
-		return rc;
-	if (c->op_bytes == 4)
-		c->eip = (u32)c->eip;
-	rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
-	if (rc)
-		return rc;
-	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
-	return rc;
-}
-
-static inline int writeback(struct x86_emulate_ctxt *ctxt,
-			    struct x86_emulate_ops *ops)
-{
-	int rc;
-	struct decode_cache *c = &ctxt->decode;
-
-	switch (c->dst.type) {
-	case OP_REG:
-		/* The 4-byte case *is* correct:
-		 * in 64-bit mode we zero-extend.
-		 */
-		switch (c->dst.bytes) {
-		case 1:
-			*(u8 *)c->dst.ptr = (u8)c->dst.val;
-			break;
-		case 2:
-			*(u16 *)c->dst.ptr = (u16)c->dst.val;
-			break;
-		case 4:
-			*c->dst.ptr = (u32)c->dst.val;
-			break;	/* 64b: zero-ext */
-		case 8:
-			*c->dst.ptr = c->dst.val;
-			break;
-		}
-		break;
-	case OP_MEM:
-		if (c->lock_prefix)
-			rc = ops->cmpxchg_emulated(
-					(unsigned long)c->dst.ptr,
-					&c->dst.orig_val,
-					&c->dst.val,
-					c->dst.bytes,
-					ctxt->vcpu);
-		else
-			rc = ops->write_emulated(
-					(unsigned long)c->dst.ptr,
-					&c->dst.val,
-					c->dst.bytes,
-					ctxt->vcpu);
-		if (rc != 0)
-			return rc;
-		break;
-	case OP_NONE:
-		/* no writeback */
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
-{
-	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
-	/*
-	 * an sti; sti; sequence only disable interrupts for the first
-	 * instruction. So, if the last instruction, be it emulated or
-	 * not, left the system with the INT_STI flag enabled, it
-	 * means that the last instruction is an sti. We should not
-	 * leave the flag on in this case. The same goes for mov ss
-	 */
-	if (!(int_shadow & mask))
-		ctxt->interruptibility = mask;
-}
-
-static inline void
-setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
-	struct kvm_segment *cs, struct kvm_segment *ss)
-{
-	memset(cs, 0, sizeof(struct kvm_segment));
-	kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
-	memset(ss, 0, sizeof(struct kvm_segment));
-
-	cs->l = 0;		/* will be adjusted later */
-	cs->base = 0;		/* flat segment */
-	cs->g = 1;		/* 4kb granularity */
-	cs->limit = 0xffffffff;	/* 4GB limit */
-	cs->type = 0x0b;	/* Read, Execute, Accessed */
-	cs->s = 1;
-	cs->dpl = 0;		/* will be adjusted later */
-	cs->present = 1;
-	cs->db = 1;
-
-	ss->unusable = 0;
-	ss->base = 0;		/* flat segment */
-	ss->limit = 0xffffffff;	/* 4GB limit */
-	ss->g = 1;		/* 4kb granularity */
-	ss->s = 1;
-	ss->type = 0x03;	/* Read/Write, Accessed */
-	ss->db = 1;		/* 32bit stack segment */
-	ss->dpl = 0;
-	ss->present = 1;
-}
-
-static int
-emulate_syscall(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
-	u64 msr_data;
-
-	/* syscall is not available in real mode */
-	if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
-		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
-		return -1;
-
-	setup_syscalls_segments(ctxt, &cs, &ss);
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
-	msr_data >>= 32;
-	cs.selector = (u16)(msr_data & 0xfffc);
-	ss.selector = (u16)(msr_data + 8);
-
-	if (is_long_mode(ctxt->vcpu)) {
-		cs.db = 0;
-		cs.l = 1;
-	}
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
-
-	c->regs[VCPU_REGS_RCX] = c->eip;
-	if (is_long_mode(ctxt->vcpu)) {
-#ifdef CONFIG_X86_64
-		c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
-
-		kvm_x86_ops->get_msr(ctxt->vcpu,
-			ctxt->mode == X86EMUL_MODE_PROT64 ?
-			MSR_LSTAR : MSR_CSTAR, &msr_data);
-		c->eip = msr_data;
-
-		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
-		ctxt->eflags &= ~(msr_data | EFLG_RF);
-#endif
-	} else {
-		/* legacy mode */
-		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
-		c->eip = (u32)msr_data;
-
-		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
-	}
-
-	return 0;
-}
-
-static int
-emulate_sysenter(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
-	u64 msr_data;
-
-	/* inject #UD if LOCK prefix is used */
-	if (c->lock_prefix)
-		return -1;
-
-	/* inject #GP if in real mode or paging is disabled */
-	if (ctxt->mode == X86EMUL_MODE_REAL ||
-		!(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
-		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
-	}
-
-	/* XXX sysenter/sysexit have not been tested in 64bit mode.
-	* Therefore, we inject an #UD.
-	*/
-	if (ctxt->mode == X86EMUL_MODE_PROT64)
-		return -1;
-
-	setup_syscalls_segments(ctxt, &cs, &ss);
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
-	switch (ctxt->mode) {
-	case X86EMUL_MODE_PROT32:
-		if ((msr_data & 0xfffc) == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		break;
-	case X86EMUL_MODE_PROT64:
-		if (msr_data == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		break;
-	}
-
-	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
-	cs.selector = (u16)msr_data;
-	cs.selector &= ~SELECTOR_RPL_MASK;
-	ss.selector = cs.selector + 8;
-	ss.selector &= ~SELECTOR_RPL_MASK;
-	if (ctxt->mode == X86EMUL_MODE_PROT64
-		|| is_long_mode(ctxt->vcpu)) {
-		cs.db = 0;
-		cs.l = 1;
-	}
-
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
-	c->eip = msr_data;
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
-	c->regs[VCPU_REGS_RSP] = msr_data;
-
-	return 0;
-}
-
-static int
-emulate_sysexit(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
-	u64 msr_data;
-	int usermode;
-
-	/* inject #UD if LOCK prefix is used */
-	if (c->lock_prefix)
-		return -1;
-
-	/* inject #GP if in real mode or paging is disabled */
-	if (ctxt->mode == X86EMUL_MODE_REAL
-		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
-		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
-	}
-
-	/* sysexit must be called from CPL 0 */
-	if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
-		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
-	}
-
-	setup_syscalls_segments(ctxt, &cs, &ss);
-
-	if ((c->rex_prefix & 0x8) != 0x0)
-		usermode = X86EMUL_MODE_PROT64;
-	else
-		usermode = X86EMUL_MODE_PROT32;
-
-	cs.dpl = 3;
-	ss.dpl = 3;
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
-	switch (usermode) {
-	case X86EMUL_MODE_PROT32:
-		cs.selector = (u16)(msr_data + 16);
-		if ((msr_data & 0xfffc) == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		ss.selector = (u16)(msr_data + 24);
-		break;
-	case X86EMUL_MODE_PROT64:
-		cs.selector = (u16)(msr_data + 32);
-		if (msr_data == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		ss.selector = cs.selector + 8;
-		cs.db = 0;
-		cs.l = 1;
-		break;
-	}
-	cs.selector |= SELECTOR_RPL_MASK;
-	ss.selector |= SELECTOR_RPL_MASK;
-
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
-
-	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
-	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
-
-	return 0;
-}
-
-int
-x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
-{
-	unsigned long memop = 0;
-	u64 msr_data;
-	unsigned long saved_eip = 0;
-	struct decode_cache *c = &ctxt->decode;
-	unsigned int port;
-	int io_dir_in;
-	int rc = 0;
-
-	ctxt->interruptibility = 0;
-
-	/* Shadow copy of register state. Committed on successful emulation.
-	 * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
-	 * modify them.
-	 */
-
-	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
-	saved_eip = c->eip;
-
-	if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
-		memop = c->modrm_ea;
-
-	if (c->rep_prefix && (c->d & String)) {
-		/* All REP prefixes have the same first termination condition */
-		if (c->regs[VCPU_REGS_RCX] == 0) {
-			kvm_rip_write(ctxt->vcpu, c->eip);
-			goto done;
-		}
-		/* The second termination condition only applies for REPE
-		 * and REPNE. Test if the repeat string operation prefix is
-		 * REPE/REPZ or REPNE/REPNZ and if it's the case it tests the
-		 * corresponding termination condition according to:
-		 * 	- if REPE/REPZ and ZF = 0 then done
-		 * 	- if REPNE/REPNZ and ZF = 1 then done
-		 */
-		if ((c->b == 0xa6) || (c->b == 0xa7) ||
-				(c->b == 0xae) || (c->b == 0xaf)) {
-			if ((c->rep_prefix == REPE_PREFIX) &&
-				((ctxt->eflags & EFLG_ZF) == 0)) {
-					kvm_rip_write(ctxt->vcpu, c->eip);
-					goto done;
-			}
-			if ((c->rep_prefix == REPNE_PREFIX) &&
-				((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
-				kvm_rip_write(ctxt->vcpu, c->eip);
-				goto done;
-			}
-		}
-		c->regs[VCPU_REGS_RCX]--;
-		c->eip = kvm_rip_read(ctxt->vcpu);
-	}
-
-	if (c->src.type == OP_MEM) {
-		c->src.ptr = (unsigned long *)memop;
-		c->src.val = 0;
-		rc = ops->read_emulated((unsigned long)c->src.ptr,
-					&c->src.val,
-					c->src.bytes,
-					ctxt->vcpu);
-		if (rc != 0)
-			goto done;
-		c->src.orig_val = c->src.val;
-	}
-
-	if ((c->d & DstMask) == ImplicitOps)
-		goto special_insn;
-
-
-	if (c->dst.type == OP_MEM) {
-		c->dst.ptr = (unsigned long *)memop;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.val = 0;
-		if (c->d & BitOp) {
-			unsigned long mask = ~(c->dst.bytes * 8 - 1);
-
-			c->dst.ptr = (void *)c->dst.ptr +
-						   (c->src.val & mask) / 8;
-		}
-		if (!(c->d & Mov) &&
-				   /* optimisation - avoid slow emulated read */
-		    ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
-					   &c->dst.val,
-					  c->dst.bytes, ctxt->vcpu)) != 0))
-			goto done;
-	}
-	c->dst.orig_val = c->dst.val;
-
-special_insn:
-
-	if (c->twobyte)
-		goto twobyte_insn;
-
-	switch (c->b) {
-	case 0x00 ... 0x05:
-	      add:		/* add */
-		emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x08 ... 0x0d:
-	      or:		/* or */
-		emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x10 ... 0x15:
-	      adc:		/* adc */
-		emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x18 ... 0x1d:
-	      sbb:		/* sbb */
-		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x20 ... 0x25:
-	      and:		/* and */
-		emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x28 ... 0x2d:
-	      sub:		/* sub */
-		emulate_2op_SrcV("sub", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x30 ... 0x35:
-	      xor:		/* xor */
-		emulate_2op_SrcV("xor", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x38 ... 0x3d:
-	      cmp:		/* cmp */
-		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x40 ... 0x47: /* inc r16/r32 */
-		emulate_1op("inc", c->dst, ctxt->eflags);
-		break;
-	case 0x48 ... 0x4f: /* dec r16/r32 */
-		emulate_1op("dec", c->dst, ctxt->eflags);
-		break;
-	case 0x50 ... 0x57:  /* push reg */
-		emulate_push(ctxt);
-		break;
-	case 0x58 ... 0x5f: /* pop reg */
-	pop_instruction:
-		rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
-		if (rc != 0)
-			goto done;
-		break;
-	case 0x63:		/* movsxd */
-		if (ctxt->mode != X86EMUL_MODE_PROT64)
-			goto cannot_emulate;
-		c->dst.val = (s32) c->src.val;
-		break;
-	case 0x68: /* push imm */
-	case 0x6a: /* push imm8 */
-		emulate_push(ctxt);
-		break;
-	case 0x6c:		/* insb */
-	case 0x6d:		/* insw/insd */
-		 if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
-				1,
-				(c->d & ByteOp) ? 1 : c->op_bytes,
-				c->rep_prefix ?
-				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
-				(ctxt->eflags & EFLG_DF),
-				register_address(c, es_base(ctxt),
-						 c->regs[VCPU_REGS_RDI]),
-				c->rep_prefix,
-				c->regs[VCPU_REGS_RDX]) == 0) {
-			c->eip = saved_eip;
-			return -1;
-		}
-		return 0;
-	case 0x6e:		/* outsb */
-	case 0x6f:		/* outsw/outsd */
-		if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
-				0,
-				(c->d & ByteOp) ? 1 : c->op_bytes,
-				c->rep_prefix ?
-				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
-				(ctxt->eflags & EFLG_DF),
-					 register_address(c,
-					  seg_override_base(ctxt, c),
-						 c->regs[VCPU_REGS_RSI]),
-				c->rep_prefix,
-				c->regs[VCPU_REGS_RDX]) == 0) {
-			c->eip = saved_eip;
-			return -1;
-		}
-		return 0;
-	case 0x70 ... 0x7f: /* jcc (short) */
-		if (test_cc(c->b, ctxt->eflags))
-			jmp_rel(c, c->src.val);
-		break;
-	case 0x80 ... 0x83:	/* Grp1 */
-		switch (c->modrm_reg) {
-		case 0:
-			goto add;
-		case 1:
-			goto or;
-		case 2:
-			goto adc;
-		case 3:
-			goto sbb;
-		case 4:
-			goto and;
-		case 5:
-			goto sub;
-		case 6:
-			goto xor;
-		case 7:
-			goto cmp;
-		}
-		break;
-	case 0x84 ... 0x85:
-		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x86 ... 0x87:	/* xchg */
-	xchg:
-		/* Write back the register source. */
-		switch (c->dst.bytes) {
-		case 1:
-			*(u8 *) c->src.ptr = (u8) c->dst.val;
-			break;
-		case 2:
-			*(u16 *) c->src.ptr = (u16) c->dst.val;
-			break;
-		case 4:
-			*c->src.ptr = (u32) c->dst.val;
-			break;	/* 64b reg: zero-extend */
-		case 8:
-			*c->src.ptr = c->dst.val;
-			break;
-		}
-		/*
-		 * Write back the memory destination with implicit LOCK
-		 * prefix.
-		 */
-		c->dst.val = c->src.val;
-		c->lock_prefix = 1;
-		break;
-	case 0x88 ... 0x8b:	/* mov */
-		goto mov;
-	case 0x8c: { /* mov r/m, sreg */
-		struct kvm_segment segreg;
-
-		if (c->modrm_reg <= 5)
-			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
-		else {
-			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
-			       c->modrm);
-			goto cannot_emulate;
-		}
-		c->dst.val = segreg.selector;
-		break;
-	}
-	case 0x8d: /* lea r16/r32, m */
-		c->dst.val = c->modrm_ea;
-		break;
-	case 0x8e: { /* mov seg, r/m16 */
-		uint16_t sel;
-		int type_bits;
-		int err;
-
-		sel = c->src.val;
-		if (c->modrm_reg == VCPU_SREG_SS)
-			toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
-
-		if (c->modrm_reg <= 5) {
-			type_bits = (c->modrm_reg == 1) ? 9 : 1;
-			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
-							  type_bits, c->modrm_reg);
-		} else {
-			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
-					c->modrm);
-			goto cannot_emulate;
-		}
-
-		if (err < 0)
-			goto cannot_emulate;
-
-		c->dst.type = OP_NONE;  /* Disable writeback. */
-		break;
-	}
-	case 0x8f:		/* pop (sole member of Grp1a) */
-		rc = emulate_grp1a(ctxt, ops);
-		if (rc != 0)
-			goto done;
-		break;
-	case 0x90: /* nop / xchg r8,rax */
-		if (!(c->rex_prefix & 1)) { /* nop */
-			c->dst.type = OP_NONE;
-			break;
-		}
-	case 0x91 ... 0x97: /* xchg reg,rax */
-		c->src.type = c->dst.type = OP_REG;
-		c->src.bytes = c->dst.bytes = c->op_bytes;
-		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
-		c->src.val = *(c->src.ptr);
-		goto xchg;
-	case 0x9c: /* pushf */
-		c->src.val =  (unsigned long) ctxt->eflags;
-		emulate_push(ctxt);
-		break;
-	case 0x9d: /* popf */
-		c->dst.type = OP_REG;
-		c->dst.ptr = (unsigned long *) &ctxt->eflags;
-		c->dst.bytes = c->op_bytes;
-		goto pop_instruction;
-	case 0xa0 ... 0xa1:	/* mov */
-		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		c->dst.val = c->src.val;
-		break;
-	case 0xa2 ... 0xa3:	/* mov */
-		c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
-		break;
-	case 0xa4 ... 0xa5:	/* movs */
-		c->dst.type = OP_MEM;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		if ((rc = ops->read_emulated(register_address(c,
-					   seg_override_base(ctxt, c),
-					c->regs[VCPU_REGS_RSI]),
-					&c->dst.val,
-					c->dst.bytes, ctxt->vcpu)) != 0)
-			goto done;
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
-	case 0xa6 ... 0xa7:	/* cmps */
-		c->src.type = OP_NONE; /* Disable writeback. */
-		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->src.ptr = (unsigned long *)register_address(c,
-				       seg_override_base(ctxt, c),
-						   c->regs[VCPU_REGS_RSI]);
-		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
-						&c->src.val,
-						c->src.bytes,
-						ctxt->vcpu)) != 0)
-			goto done;
-
-		c->dst.type = OP_NONE; /* Disable writeback. */
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
-						&c->dst.val,
-						c->dst.bytes,
-						ctxt->vcpu)) != 0)
-			goto done;
-
-		DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
-
-		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->src.bytes
-								  : c->src.bytes);
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-								  : c->dst.bytes);
-
-		break;
-	case 0xaa ... 0xab:	/* stos */
-		c->dst.type = OP_MEM;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		c->dst.val = c->regs[VCPU_REGS_RAX];
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
-	case 0xac ... 0xad:	/* lods */
-		c->dst.type = OP_REG;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		if ((rc = ops->read_emulated(register_address(c,
-						 seg_override_base(ctxt, c),
-						 c->regs[VCPU_REGS_RSI]),
-						 &c->dst.val,
-						 c->dst.bytes,
-						 ctxt->vcpu)) != 0)
-			goto done;
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
-	case 0xae ... 0xaf:	/* scas */
-		DPRINTF("Urk! I don't handle SCAS.\n");
-		goto cannot_emulate;
-	case 0xb0 ... 0xbf: /* mov r, imm */
-		goto mov;
-	case 0xc0 ... 0xc1:
-		emulate_grp2(ctxt);
-		break;
-	case 0xc3: /* ret */
-		c->dst.type = OP_REG;
-		c->dst.ptr = &c->eip;
-		c->dst.bytes = c->op_bytes;
-		goto pop_instruction;
-	case 0xc6 ... 0xc7:	/* mov (sole member of Grp11) */
-	mov:
-		c->dst.val = c->src.val;
-		break;
-	case 0xcb:		/* ret far */
-		rc = emulate_ret_far(ctxt, ops);
-		if (rc)
-			goto done;
-		break;
-	case 0xd0 ... 0xd1:	/* Grp2 */
-		c->src.val = 1;
-		emulate_grp2(ctxt);
-		break;
-	case 0xd2 ... 0xd3:	/* Grp2 */
-		c->src.val = c->regs[VCPU_REGS_RCX];
-		emulate_grp2(ctxt);
-		break;
-	case 0xe4: 	/* inb */
-	case 0xe5: 	/* in */
-		port = c->src.val;
-		io_dir_in = 1;
-		goto do_io;
-	case 0xe6: /* outb */
-	case 0xe7: /* out */
-		port = c->src.val;
-		io_dir_in = 0;
-		goto do_io;
-	case 0xe8: /* call (near) */ {
-		long int rel = c->src.val;
-		c->src.val = (unsigned long) c->eip;
-		jmp_rel(c, rel);
-		emulate_push(ctxt);
-		break;
-	}
-	case 0xe9: /* jmp rel */
-		goto jmp;
-	case 0xea: /* jmp far */
-		if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
-					VCPU_SREG_CS) < 0) {
-			DPRINTF("jmp far: Failed to load CS descriptor\n");
-			goto cannot_emulate;
-		}
-
-		c->eip = c->src.val;
-		break;
-	case 0xeb:
-	      jmp:		/* jmp rel short */
-		jmp_rel(c, c->src.val);
-		c->dst.type = OP_NONE; /* Disable writeback. */
-		break;
-	case 0xec: /* in al,dx */
-	case 0xed: /* in (e/r)ax,dx */
-		port = c->regs[VCPU_REGS_RDX];
-		io_dir_in = 1;
-		goto do_io;
-	case 0xee: /* out al,dx */
-	case 0xef: /* out (e/r)ax,dx */
-		port = c->regs[VCPU_REGS_RDX];
-		io_dir_in = 0;
-	do_io:	if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
-				   (c->d & ByteOp) ? 1 : c->op_bytes,
-				   port) != 0) {
-			c->eip = saved_eip;
-			goto cannot_emulate;
-		}
-		break;
-	case 0xf4:              /* hlt */
-		ctxt->vcpu->arch.halt_request = 1;
-		break;
-	case 0xf5:	/* cmc */
-		/* complement carry flag from eflags reg */
-		ctxt->eflags ^= EFLG_CF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xf6 ... 0xf7:	/* Grp3 */
-		rc = emulate_grp3(ctxt, ops);
-		if (rc != 0)
-			goto done;
-		break;
-	case 0xf8: /* clc */
-		ctxt->eflags &= ~EFLG_CF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfa: /* cli */
-		ctxt->eflags &= ~X86_EFLAGS_IF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfb: /* sti */
-		toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
-		ctxt->eflags |= X86_EFLAGS_IF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfc: /* cld */
-		ctxt->eflags &= ~EFLG_DF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfd: /* std */
-		ctxt->eflags |= EFLG_DF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfe ... 0xff:	/* Grp4/Grp5 */
-		rc = emulate_grp45(ctxt, ops);
-		if (rc != 0)
-			goto done;
-		break;
-	}
-
-writeback:
-	rc = writeback(ctxt, ops);
-	if (rc != 0)
-		goto done;
-
-	/* Commit shadow register state. */
-	memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
-	kvm_rip_write(ctxt->vcpu, c->eip);
-
-done:
-	if (rc == X86EMUL_UNHANDLEABLE) {
-		c->eip = saved_eip;
-		return -1;
-	}
-	return 0;
-
-twobyte_insn:
-	switch (c->b) {
-	case 0x01: /* lgdt, lidt, lmsw */
-		switch (c->modrm_reg) {
-			u16 size;
-			unsigned long address;
-
-		case 0: /* vmcall */
-			if (c->modrm_mod != 3 || c->modrm_rm != 1)
-				goto cannot_emulate;
-
-			rc = kvm_fix_hypercall(ctxt->vcpu);
-			if (rc)
-				goto done;
-
-			/* Let the processor re-execute the fixed hypercall */
-			c->eip = kvm_rip_read(ctxt->vcpu);
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		case 2: /* lgdt */
-			rc = read_descriptor(ctxt, ops, c->src.ptr,
-					     &size, &address, c->op_bytes);
-			if (rc)
-				goto done;
-			realmode_lgdt(ctxt->vcpu, size, address);
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		case 3: /* lidt/vmmcall */
-			if (c->modrm_mod == 3) {
-				switch (c->modrm_rm) {
-				case 1:
-					rc = kvm_fix_hypercall(ctxt->vcpu);
-					if (rc)
-						goto done;
-					break;
-				default:
-					goto cannot_emulate;
-				}
-			} else {
-				rc = read_descriptor(ctxt, ops, c->src.ptr,
-						     &size, &address,
-						     c->op_bytes);
-				if (rc)
-					goto done;
-				realmode_lidt(ctxt->vcpu, size, address);
-			}
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		case 4: /* smsw */
-			c->dst.bytes = 2;
-			c->dst.val = realmode_get_cr(ctxt->vcpu, 0);
-			break;
-		case 6: /* lmsw */
-			realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
-				      &ctxt->eflags);
-			c->dst.type = OP_NONE;
-			break;
-		case 7: /* invlpg*/
-			emulate_invlpg(ctxt->vcpu, memop);
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		default:
-			goto cannot_emulate;
-		}
-		break;
-	case 0x05: 		/* syscall */
-		if (emulate_syscall(ctxt) == -1)
-			goto cannot_emulate;
-		else
-			goto writeback;
-		break;
-	case 0x06:
-		emulate_clts(ctxt->vcpu);
-		c->dst.type = OP_NONE;
-		break;
-	case 0x08:		/* invd */
-	case 0x09:		/* wbinvd */
-	case 0x0d:		/* GrpP (prefetch) */
-	case 0x18:		/* Grp16 (prefetch/nop) */
-		c->dst.type = OP_NONE;
-		break;
-	case 0x20: /* mov cr, reg */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		c->regs[c->modrm_rm] =
-				realmode_get_cr(ctxt->vcpu, c->modrm_reg);
-		c->dst.type = OP_NONE;	/* no writeback */
-		break;
-	case 0x21: /* mov from dr to reg */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		rc = emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
-		if (rc)
-			goto cannot_emulate;
-		c->dst.type = OP_NONE;	/* no writeback */
-		break;
-	case 0x22: /* mov reg, cr */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		realmode_set_cr(ctxt->vcpu,
-				c->modrm_reg, c->modrm_val, &ctxt->eflags);
-		c->dst.type = OP_NONE;
-		break;
-	case 0x23: /* mov from reg to dr */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		rc = emulator_set_dr(ctxt, c->modrm_reg,
-				     c->regs[c->modrm_rm]);
-		if (rc)
-			goto cannot_emulate;
-		c->dst.type = OP_NONE;	/* no writeback */
-		break;
-	case 0x30:
-		/* wrmsr */
-		msr_data = (u32)c->regs[VCPU_REGS_RAX]
-			| ((u64)c->regs[VCPU_REGS_RDX] << 32);
-		rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
-		if (rc) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = kvm_rip_read(ctxt->vcpu);
-		}
-		rc = X86EMUL_CONTINUE;
-		c->dst.type = OP_NONE;
-		break;
-	case 0x32:
-		/* rdmsr */
-		rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
-		if (rc) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = kvm_rip_read(ctxt->vcpu);
-		} else {
-			c->regs[VCPU_REGS_RAX] = (u32)msr_data;
-			c->regs[VCPU_REGS_RDX] = msr_data >> 32;
-		}
-		rc = X86EMUL_CONTINUE;
-		c->dst.type = OP_NONE;
-		break;
-	case 0x34:		/* sysenter */
-		if (emulate_sysenter(ctxt) == -1)
-			goto cannot_emulate;
-		else
-			goto writeback;
-		break;
-	case 0x35:		/* sysexit */
-		if (emulate_sysexit(ctxt) == -1)
-			goto cannot_emulate;
-		else
-			goto writeback;
-		break;
-	case 0x40 ... 0x4f:	/* cmov */
-		c->dst.val = c->dst.orig_val = c->src.val;
-		if (!test_cc(c->b, ctxt->eflags))
-			c->dst.type = OP_NONE; /* no writeback */
-		break;
-	case 0x80 ... 0x8f: /* jnz rel, etc*/
-		if (test_cc(c->b, ctxt->eflags))
-			jmp_rel(c, c->src.val);
-		c->dst.type = OP_NONE;
-		break;
-	case 0xa3:
-	      bt:		/* bt */
-		c->dst.type = OP_NONE;
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("bt", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xa4: /* shld imm8, r, r/m */
-	case 0xa5: /* shld cl, r, r/m */
-		emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xab:
-	      bts:		/* bts */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xac: /* shrd imm8, r, r/m */
-	case 0xad: /* shrd cl, r, r/m */
-		emulate_2op_cl("shrd", c->src2, c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xae:              /* clflush */
-		break;
-	case 0xb0 ... 0xb1:	/* cmpxchg */
-		/*
-		 * Save real source value, then compare EAX against
-		 * destination.
-		 */
-		c->src.orig_val = c->src.val;
-		c->src.val = c->regs[VCPU_REGS_RAX];
-		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-		if (ctxt->eflags & EFLG_ZF) {
-			/* Success: write back to memory. */
-			c->dst.val = c->src.orig_val;
-		} else {
-			/* Failure: write the value we saw to EAX. */
-			c->dst.type = OP_REG;
-			c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		}
-		break;
-	case 0xb3:
-	      btr:		/* btr */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("btr", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xb6 ... 0xb7:	/* movzx */
-		c->dst.bytes = c->op_bytes;
-		c->dst.val = (c->d & ByteOp) ? (u8) c->src.val
-						       : (u16) c->src.val;
-		break;
-	case 0xba:		/* Grp8 */
-		switch (c->modrm_reg & 3) {
-		case 0:
-			goto bt;
-		case 1:
-			goto bts;
-		case 2:
-			goto btr;
-		case 3:
-			goto btc;
-		}
-		break;
-	case 0xbb:
-	      btc:		/* btc */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("btc", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xbe ... 0xbf:	/* movsx */
-		c->dst.bytes = c->op_bytes;
-		c->dst.val = (c->d & ByteOp) ? (s8) c->src.val :
-							(s16) c->src.val;
-		break;
-	case 0xc3:		/* movnti */
-		c->dst.bytes = c->op_bytes;
-		c->dst.val = (c->op_bytes == 4) ? (u32) c->src.val :
-							(u64) c->src.val;
-		break;
-	case 0xc7:		/* Grp9 (cmpxchg8b) */
-		rc = emulate_grp9(ctxt, ops, memop);
-		if (rc != 0)
-			goto done;
-		c->dst.type = OP_NONE;
-		break;
-	}
-	goto writeback;
-
-cannot_emulate:
-	DPRINTF("Cannot emulate %02x\n", c->b);
-	c->eip = saved_eip;
-	return -1;
-}
-- 
cgit v1.2.3


From 27c238106862fb0dd3e229c48c1ef56502b0ec88 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 16 Aug 2009 15:31:11 +0300
Subject: KVM: Add __KERNEL__ guards to exported headers

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_para.h | 4 ++++
 arch/s390/include/asm/kvm_para.h | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
index 0d6d8ca07b8..1588aee781a 100644
--- a/arch/ia64/include/asm/kvm_para.h
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -19,9 +19,13 @@
  *
  */
 
+#ifdef __KERNEL__
+
 static inline unsigned int kvm_arch_para_features(void)
 {
 	return 0;
 }
 
 #endif
+
+#endif
diff --git a/arch/s390/include/asm/kvm_para.h b/arch/s390/include/asm/kvm_para.h
index 2c503796b61..6964db226f8 100644
--- a/arch/s390/include/asm/kvm_para.h
+++ b/arch/s390/include/asm/kvm_para.h
@@ -13,6 +13,8 @@
 #ifndef __S390_KVM_PARA_H
 #define __S390_KVM_PARA_H
 
+#ifdef __KERNEL__
+
 /*
  * Hypercalls for KVM on s390. The calling convention is similar to the
  * s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1
@@ -147,4 +149,6 @@ static inline unsigned int kvm_arch_para_features(void)
 	return 0;
 }
 
+#endif
+
 #endif /* __S390_KVM_PARA_H */
-- 
cgit v1.2.3


From fa6870c6b64214aced218d930ec7221e2a9767b8 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 16 Aug 2009 15:31:33 +0300
Subject: KVM: Add missing #include

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_para.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index b8a3305ae09..c584076a47f 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_KVM_PARA_H
 #define _ASM_X86_KVM_PARA_H
 
+#include <linux/types.h>
+
 /* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
  * should be used to determine that a VM is running under KVM.
  */
-- 
cgit v1.2.3


From 7bdb588827265bf42dd420e95d34275c83603568 Mon Sep 17 00:00:00 2001
From: Mohammed Gamal <m.gamal005@gmail.com>
Date: Wed, 19 Aug 2009 01:26:28 +0300
Subject: KVM: x86 emulator: Add adc and sbb missing decoder flags

Add missing decoder flags for adc and sbb instructions
(opcodes 0x14-0x15, 0x1c-0x1d)

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/emulate.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 2eb807a7b62..1be5cd640e9 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -100,11 +100,11 @@ static u32 opcode_table[256] = {
 	/* 0x10 - 0x17 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
 	/* 0x18 - 0x1F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
 	/* 0x20 - 0x27 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-- 
cgit v1.2.3


From d9048d3278ed4d395e63899257c3fa377693968b Mon Sep 17 00:00:00 2001
From: Mikhail Ershov <Mike.Ershov@gmail.com>
Date: Wed, 19 Aug 2009 14:08:07 +0400
Subject: KVM: Use kvm_{read,write}_guest_virt() to read and write segment
 descriptors

Segment descriptors tables can be placed on two non-contiguous pages.
This patch makes reading segment descriptors by linear address.

Signed-off-by: Mikhail Ershov <Mike.Ershov@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c0e942747b0..59a8ba4d56b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4021,7 +4021,6 @@ static void get_segment_descriptor_dtable(struct kvm_vcpu *vcpu,
 static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
-	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -4031,16 +4030,13 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
 		return 1;
 	}
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
-	gpa += index * 8;
-	return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
+	return kvm_read_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
 }
 
 /* allowed just for 8 bytes segments */
 static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
-	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -4048,9 +4044,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 
 	if (dtable.limit < index * 8 + 7)
 		return 1;
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
-	gpa += index * 8;
-	return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
+	return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
 }
 
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
-- 
cgit v1.2.3


From 95eb84a7588d7d7afd3096807efc052adc7479e1 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Wed, 19 Aug 2009 09:52:18 +0800
Subject: KVM: VMX: Fix EPT with WP bit change during paging

QNX update WP bit when paging enabled, which is not covered yet. This one fix
QNX boot with EPT.

Cc: stable@kernel.org
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 2b7e7bd190f..1ee811cef23 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1642,7 +1642,6 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
 		vmx_set_cr4(vcpu, vcpu->arch.cr4);
-		*hw_cr0 &= ~X86_CR0_WP;
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
@@ -1651,9 +1650,10 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			       CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
 		vmx_set_cr4(vcpu, vcpu->arch.cr4);
-		if (!(vcpu->arch.cr0 & X86_CR0_WP))
-			*hw_cr0 &= ~X86_CR0_WP;
 	}
+
+	if (!(cr0 & X86_CR0_WP))
+		*hw_cr0 &= ~X86_CR0_WP;
 }
 
 static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
-- 
cgit v1.2.3


From 88c808fd42b53a7e01a2ac3253ef31fef74cb5af Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 17 Aug 2009 22:49:40 +0300
Subject: KVM: Protect update_cr8_intercept() when running without an apic

update_cr8_intercept() can be triggered from userspace while there
is no apic present.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 59a8ba4d56b..35e7fc54de3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3500,6 +3500,9 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 	if (!kvm_x86_ops->update_cr8_intercept)
 		return;
 
+	if (!vcpu->arch.apic)
+		return;
+
 	if (!vcpu->arch.apic->vapic_addr)
 		max_irr = kvm_lapic_find_highest_irr(vcpu);
 	else
-- 
cgit v1.2.3


From 60f24784a92c25c269a5e741a8ce8ff63e887be8 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 27 Aug 2009 13:37:06 +0300
Subject: KVM: Optimize kvm_mmu_unprotect_page_virt() for tdp

We know no pages are protected, so we can short-circuit the whole thing
(including fairly nasty guest memory accesses).

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 6f38178af92..eca41ae9f45 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2694,6 +2694,9 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	gpa_t gpa;
 	int r;
 
+	if (tdp_enabled)
+		return 0;
+
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
-- 
cgit v1.2.3


From 5fff7d270bd6a4759b6d663741b729cdee370257 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 27 Aug 2009 18:41:30 +0300
Subject: KVM: VMX: Fix cr8 exiting control clobbering by EPT

Don't call adjust_vmx_controls() two times for the same control.
It restores options that were dropped earlier.  This loses us the cr8
exit control, which causes a massive performance regression Windows x64.

Cc: stable@kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 1ee811cef23..eec04129402 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1262,12 +1262,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 	if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) {
 		/* CR3 accesses and invlpg don't need to cause VM Exits when EPT
 		   enabled */
-		min &= ~(CPU_BASED_CR3_LOAD_EXITING |
-			 CPU_BASED_CR3_STORE_EXITING |
-			 CPU_BASED_INVLPG_EXITING);
-		if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
-					&_cpu_based_exec_control) < 0)
-			return -EIO;
+		_cpu_based_exec_control &= ~(CPU_BASED_CR3_LOAD_EXITING |
+					     CPU_BASED_CR3_STORE_EXITING |
+					     CPU_BASED_INVLPG_EXITING);
 		rdmsr(MSR_IA32_VMX_EPT_VPID_CAP,
 		      vmx_capability.ept, vmx_capability.vpid);
 	}
-- 
cgit v1.2.3


From a20316d2aa41a8f4fd171648bad8f044f6060826 Mon Sep 17 00:00:00 2001
From: Glauber Costa <glommer@redhat.com>
Date: Mon, 31 Aug 2009 03:04:31 -0400
Subject: KVM guest: fix bogus wallclock physical address calculation

The use of __pa() to calculate the address of a C-visible symbol
is wrong, and can lead to unpredictable results. See arch/x86/include/asm/page.h
for details.

It should be replaced with __pa_symbol(), that does the correct math here,
by taking relocations into account.  This ensures the correct wallclock data
structure physical address is passed to the hypervisor.

Cc: stable@kernel.org
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kernel/kvmclock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 223af43f152..e5efcdcca31 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -50,8 +50,8 @@ static unsigned long kvm_get_wallclock(void)
 	struct timespec ts;
 	int low, high;
 
-	low = (int)__pa(&wall_clock);
-	high = ((u64)__pa(&wall_clock) >> 32);
+	low = (int)__pa_symbol(&wall_clock);
+	high = ((u64)__pa_symbol(&wall_clock) >> 32);
 	native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
 
 	vcpu_time = &get_cpu_var(hv_clock);
-- 
cgit v1.2.3


From ee297936a7ed7e8477a200eb9c6de13150adbf0c Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Fri, 7 Aug 2009 15:51:12 +0200
Subject: [ARM] pxa: remove left-over struct clk *other field from struct clk

Its removal was omitted when all its uses were removed in 8c3abc7d...
"[ARM] pxa: convert to clkdev and match clocks by struct device where possible"

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/clock.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 5599bceff73..978a3667e90 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -12,7 +12,6 @@ struct clk {
 	unsigned int		cken;
 	unsigned int		delay;
 	unsigned int		enabled;
-	struct clk		*other;
 };
 
 #define INIT_CLKREG(_clk,_devname,_conname)		\
-- 
cgit v1.2.3


From 9304d008d6ba41ff52ef6eae44337398e83b4436 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Mon, 31 Aug 2009 20:16:54 +0800
Subject: [ARM] pxa: remove duplicate mfp definition in mach

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/mfp.h | 301 +----------------------------------
 1 file changed, 1 insertion(+), 300 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 482185053a9..271e249ae34 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -16,305 +16,6 @@
 #ifndef __ASM_ARCH_MFP_H
 #define __ASM_ARCH_MFP_H
 
-#define mfp_to_gpio(m)	((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_INPUT		(0x6 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+#include <plat/mfp.h>
 
 #endif /* __ASM_ARCH_MFP_H */
-- 
cgit v1.2.3


From fb60870f630f926d2299b6ebd31fc94714dcd734 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Tue, 11 Aug 2009 14:39:09 +0200
Subject: [ARM] pxa: add MFP_PULL_FLOAT

There is currently an uncovered case for MFP configuration on PXAs which
is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN
bits. This case is needed to explicitly let pins float, even if the
selected alternate function would default to a configuration with a pull
resistor enabled.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/include/plat/mfp.h | 5 +++--
 arch/arm/plat-pxa/mfp.c              | 3 +++
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 64019464c8d..08ad665460b 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -325,8 +325,9 @@ typedef unsigned long mfp_cfg_t;
 #define MFP_PULL_LOW		(0x1 << 21)
 #define MFP_PULL_HIGH		(0x2 << 21)
 #define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+#define MFP_PULL_FLOAT		(0x4 << 21)
+#define MFP_PULL_MASK		(0x7 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x7)
 
 #define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
 				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index e716c622a17..9405d0379c8 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -77,11 +77,13 @@
  * MFPR_PULL_LOW        1         0        1
  * MFPR_PULL_HIGH       1         1        0
  * MFPR_PULL_BOTH       1         1        1
+ * MFPR_PULL_FLOAT	1         0        0
  */
 #define MFPR_PULL_NONE		(0)
 #define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
 #define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
 #define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
@@ -116,6 +118,7 @@ static const unsigned long mfpr_pull[] = {
 	MFPR_PULL_LOW,
 	MFPR_PULL_HIGH,
 	MFPR_PULL_BOTH,
+	MFPR_PULL_FLOAT,
 };
 
 /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-- 
cgit v1.2.3


From 063936df925f54a32649490f828af9af66ef8c8e Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 17 Jun 2009 13:57:40 +0800
Subject: [ARM] pxa: support mfp of pxa935

Add and initialize the mfp setting of pxa935 chip.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/pxa930.c           | 19 +++++++++-
 arch/arm/plat-pxa/include/plat/mfp.h | 68 ++++++++++++++++++++++++++++++++++++
 2 files changed, 86 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 71131742fff..06429200828 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -176,13 +176,30 @@ static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
+	MFP_ADDR(GPIO159, 0x0524),
+	MFP_ADDR(GPIO163, 0x0534),
+	MFP_ADDR(GPIO167, 0x0544),
+	MFP_ADDR(GPIO168, 0x0548),
+	MFP_ADDR(GPIO169, 0x054c),
+	MFP_ADDR(GPIO170, 0x0550),
+	MFP_ADDR(GPIO171, 0x0554),
+	MFP_ADDR(GPIO172, 0x0558),
+	MFP_ADDR(GPIO173, 0x055c),
+
+	MFP_ADDR_END,
+};
+
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930()) {
+	if (cpu_is_pxa930() || cpu_is_pxa935()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
 
+	if (cpu_is_pxa935())
+		mfp_init_addr(pxa935_mfp_addr_map);
+
 	return 0;
 }
 
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 08ad665460b..22086e696e8 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -150,6 +150,74 @@ enum {
 	MFP_PIN_GPIO125,
 	MFP_PIN_GPIO126,
 	MFP_PIN_GPIO127,
+
+	MFP_PIN_GPIO128,
+	MFP_PIN_GPIO129,
+	MFP_PIN_GPIO130,
+	MFP_PIN_GPIO131,
+	MFP_PIN_GPIO132,
+	MFP_PIN_GPIO133,
+	MFP_PIN_GPIO134,
+	MFP_PIN_GPIO135,
+	MFP_PIN_GPIO136,
+	MFP_PIN_GPIO137,
+	MFP_PIN_GPIO138,
+	MFP_PIN_GPIO139,
+	MFP_PIN_GPIO140,
+	MFP_PIN_GPIO141,
+	MFP_PIN_GPIO142,
+	MFP_PIN_GPIO143,
+	MFP_PIN_GPIO144,
+	MFP_PIN_GPIO145,
+	MFP_PIN_GPIO146,
+	MFP_PIN_GPIO147,
+	MFP_PIN_GPIO148,
+	MFP_PIN_GPIO149,
+	MFP_PIN_GPIO150,
+	MFP_PIN_GPIO151,
+	MFP_PIN_GPIO152,
+	MFP_PIN_GPIO153,
+	MFP_PIN_GPIO154,
+	MFP_PIN_GPIO155,
+	MFP_PIN_GPIO156,
+	MFP_PIN_GPIO157,
+	MFP_PIN_GPIO158,
+	MFP_PIN_GPIO159,
+	MFP_PIN_GPIO160,
+	MFP_PIN_GPIO161,
+	MFP_PIN_GPIO162,
+	MFP_PIN_GPIO163,
+	MFP_PIN_GPIO164,
+	MFP_PIN_GPIO165,
+	MFP_PIN_GPIO166,
+	MFP_PIN_GPIO167,
+	MFP_PIN_GPIO168,
+	MFP_PIN_GPIO169,
+	MFP_PIN_GPIO170,
+	MFP_PIN_GPIO171,
+	MFP_PIN_GPIO172,
+	MFP_PIN_GPIO173,
+	MFP_PIN_GPIO174,
+	MFP_PIN_GPIO175,
+	MFP_PIN_GPIO176,
+	MFP_PIN_GPIO177,
+	MFP_PIN_GPIO178,
+	MFP_PIN_GPIO179,
+	MFP_PIN_GPIO180,
+	MFP_PIN_GPIO181,
+	MFP_PIN_GPIO182,
+	MFP_PIN_GPIO183,
+	MFP_PIN_GPIO184,
+	MFP_PIN_GPIO185,
+	MFP_PIN_GPIO186,
+	MFP_PIN_GPIO187,
+	MFP_PIN_GPIO188,
+	MFP_PIN_GPIO189,
+	MFP_PIN_GPIO190,
+	MFP_PIN_GPIO191,
+
+	MFP_PIN_GPIO255 = 255,
+
 	MFP_PIN_GPIO0_2,
 	MFP_PIN_GPIO1_2,
 	MFP_PIN_GPIO2_2,
-- 
cgit v1.2.3


From 9db95cb6c430b3d9b8abbd5870e0d1e69b884ba0 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Mon, 31 Aug 2009 17:23:44 +0800
Subject: [ARM] pxa: expand irq support for PXA93x and PXA950

PXA93x/950 has additional 64 GPIOs, each is a secondary interrupt
source for IRQ_GPIO_2_x, extend PXA_GPIO_IRQ_{BASE,NUM}.

PXA93x/950 specific IRQ definitions are added as well.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/irqs.h | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 6a1d9599334..abd2c2cf213 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -68,6 +68,7 @@
 #ifdef CONFIG_PXA3xx
 #define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
 #define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
 #define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
@@ -81,8 +82,31 @@
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
 #endif
 
-#define PXA_GPIO_IRQ_BASE	PXA_IRQ(64)
-#define PXA_GPIO_IRQ_NUM	(128)
+#ifdef CONFIG_CPU_PXA935
+#define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
+#define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
+
+#define IRQ_MMC3_PXA935	PXA_IRQ(72)	/* MMC3 Controller (PXA935) */
+#define IRQ_MMC4_PXA935	PXA_IRQ(73)	/* MMC4 Controller (PXA935) */
+#define IRQ_MMC5_PXA935	PXA_IRQ(74)	/* MMC5 Controller (PXA935) */
+
+#define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
+#define IRQ_ACIPC0	PXA_IRQ(5)
+#define IRQ_ACIPC1	PXA_IRQ(40)
+#define IRQ_ACIPC2	PXA_IRQ(19)
+#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball */
+#endif
+
+#ifdef CONFIG_CPU_PXA950
+#define IRQ_GC500	PXA_IRQ(70)	/* Graphics Controller (PXA950) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
+#define PXA_GPIO_IRQ_NUM	(192)
 
 #define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
 #define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
-- 
cgit v1.2.3


From 337c1db645bce3f5a832129c4a803dc157ac7e9a Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Fri, 21 Aug 2009 16:10:41 +0800
Subject: [ARM] pxa: update cpu_is_xsc3() to include Marvell CPUID

CPU id is changed in Marvell chip. So update the code in cpu_is_xsc3().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/include/asm/cputype.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index b3e656c6fb7..7c6e208a7de 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -73,7 +73,10 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
 #else
 static inline int cpu_is_xsc3(void)
 {
-	if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+	/* It covers both Intel ID and Marvell ID */
+	if ((id == 0x69056000) || (id == 0x56056000))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.3


From 4646dd2795e793f97b7fd40206567bf72e6cdf21 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 26 Aug 2009 10:32:00 +0800
Subject: [ARM] pxa: add cpu_is_pxa950() and Kconfig options

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig                 |  5 +++++
 arch/arm/mach-pxa/include/mach/hardware.h | 17 +++++++++++++++++
 2 files changed, 22 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 89c992b8f75..626cecb6e73 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -21,6 +21,11 @@ config CPU_PXA930
 
 config CPU_PXA935
 	bool "PXA935 (codename Tavor-P65)"
+	select CPU_PXA930
+
+config CPU_PXA950
+	bool "PXA950 (codename Tavor-PV2)"
+	select CPU_PXA930
 
 endmenu
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 16ab79547da..aa3d9f70a08 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -197,6 +197,16 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA950
+#define __cpu_is_pxa950(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		id == 0x697;				\
+	 })
+#else
+#define __cpu_is_pxa950(id)	(0)
+#endif
+
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -249,6 +259,13 @@
 		__cpu_is_pxa935(id);			\
 	 })
 
+#define cpu_is_pxa950()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa950(id);			\
+	 })
+
+
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
-- 
cgit v1.2.3


From 6ba39282bb3ee486a142ee3fd61196d329622ed9 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 19 Aug 2009 19:30:24 +0800
Subject: [ARM] pxa: add more registers in interrupt controller

Add priority registers and new registers of pxa935.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/regs-intc.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index ad23e74b762..68464ce1c1e 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -13,6 +13,7 @@
 #define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
 #define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
 #define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+#define ICHP		__REG(0x40D00018)  /* Interrupt Controller Highest Priority Register */
 
 #define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
 #define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
@@ -20,4 +21,14 @@
 #define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
 #define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
 
+#define ICIP3		__REG(0x40D00130)  /* Interrupt Controller IRQ Pending Register 3 */
+#define ICMR3		__REG(0x40D00134)  /* Interrupt Controller Mask Register 3 */
+#define ICLR3		__REG(0x40D00138)  /* Interrupt Controller Level Register 3 */
+#define ICFP3		__REG(0x40D0013C)  /* Interrupt Controller FIQ Pending Register 3 */
+#define ICPR3		__REG(0x40D00140)  /* Interrupt Controller Pending Register 3 */
+
+#define IPR(x)		__REG(0x40D0001C + (x < 32 ? (x << 2)		\
+				: (x < 64 ? (0x94 + ((x - 32) << 2))	\
+				: (0x128 + ((x - 64) << 2)))))
+
 #endif /* __ASM_MACH_REGS_INTC_H */
-- 
cgit v1.2.3


From d2c37068429b29d6549cf3486fc84b836689e122 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 19 Aug 2009 19:49:31 +0800
Subject: [ARM] pxa: initialize default interrupt priority and use ICHP for IRQ
 handling

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/entry-macro.S | 25 +++++++++----------------
 arch/arm/mach-pxa/irq.c                      |  8 +++++++-
 2 files changed, 16 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index f6b4bf3e73d..241880608ac 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -24,34 +24,27 @@
 		mov	\tmp, \tmp, lsr #13
 		and	\tmp, \tmp, #0x7		@ Core G
 		cmp	\tmp, #1
-		bhi	1004f
+		bhi	1002f
 
+		@ Core Generation 1 (PXA25x)
 		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
 		add	\base, \base, #0x00d00000
 		ldr	\irqstat, [\base, #0]		@ ICIP
 		ldr	\irqnr, [\base, #4]		@ ICMR
-		b	1002f
 
-1004:
-		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
-		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
 		ands	\irqnr, \irqstat, \irqnr
-		beq	1003f
+		beq	1001f
 		rsb	\irqstat, \irqnr, #0
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #(32 + PXA_IRQ(0))
+		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
 		b	1001f
-1003:
-		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
-		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
 1002:
-		ands	\irqnr, \irqstat, \irqnr
+		@ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
+		mrc	p6, 0, \irqstat, c5, c0, 0	@ ICHP
+		tst	\irqstat, #0x80000000
 		beq	1001f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
+		bic	\irqstat, \irqstat, #0x80000000
+		mov	\irqnr, \irqstat, lsr #16
 1001:
 		.endm
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index f6e0300e4f6..d694ce28966 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -120,7 +120,7 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
 
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
-	int irq;
+	int irq, i;
 
 	pxa_internal_irq_nr = irq_nr;
 
@@ -129,6 +129,12 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
 	}
 
+	/* initialize interrupt priority */
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < irq_nr; i++)
+			IPR(i) = i | (1 << 31);
+	}
+
 	/* only unmasked interrupts kick us out of idle */
 	ICCR = 1;
 
-- 
cgit v1.2.3


From f0f04f0840e41411895056bece50bfbd5dfc81cc Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 9 Jul 2009 19:04:48 +0200
Subject: [ARM] pxa: add clock definition for graphics controller

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 4 ++--
 arch/arm/mach-pxa/pxa300.c                   | 2 ++
 arch/arm/mach-pxa/pxa320.c                   | 2 ++
 3 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 7d1a059b3d4..e91d63cfe81 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -208,7 +208,7 @@
 #define CKEN_MVED	43	/* < MVED clock enable */
 
 /* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
+#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
 
 #endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 4ba6d21f851..f4af6e2bef8 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -84,9 +84,11 @@ static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 };
 
 static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
 
 static struct clk_lookup common_clkregs[] = {
 	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 8b3d97efada..c7373e74a10 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -78,9 +78,11 @@ static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 };
 
 static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
 
 static struct clk_lookup pxa320_clkregs[] = {
 	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static int __init pxa320_init(void)
-- 
cgit v1.2.3


From 1ff2c33e197f0a65e4641b2dbac1a8c85f5204dd Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 9 Jul 2009 19:04:49 +0200
Subject: [ARM] pxa: add device definition for graphics controller

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/devices.c | 27 +++++++++++++++++++++++++++
 arch/arm/mach-pxa/devices.h |  2 ++
 2 files changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index ecc08f360b6..46fabe1cca1 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -935,6 +935,33 @@ void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
 {
 	pxa_register_device(&pxa3xx_device_nand, info);
 }
+
+static struct resource pxa3xx_resources_gcu[] = {
+	{
+		.start	= 0x54000000,
+		.end	= 0x54000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_GCU,
+		.end	= IRQ_GCU,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+	.name		= "pxa3xx-gcu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
+	.resource	= pxa3xx_resources_gcu,
+	.dev		= {
+		.dma_mask = &pxa3xx_gcu_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
 #endif /* CONFIG_PXA3xx */
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index ecc24a4dca6..93817d99761 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -35,4 +35,6 @@ extern struct platform_device pxa27x_device_pwm1;
 extern struct platform_device pxa3xx_device_nand;
 extern struct platform_device pxa3xx_device_i2c_power;
 
+extern struct platform_device pxa3xx_device_gcu;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
-- 
cgit v1.2.3


From 17e513ec79f9524f737f367a1efe97489aff9546 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 9 Jul 2009 19:04:50 +0200
Subject: [ARM] pxa: rename GCU IRQ for consistency

For consistency reasons, rename IRQ_GRPHICS to IRQ_GCU.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/irqs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index abd2c2cf213..7af0de4bf65 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -71,7 +71,7 @@
 #define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller */
 #define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
 #define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
 #define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
-- 
cgit v1.2.3


From 36714c935a5d4125c6ccd013484de725dc09b387 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@marvell.com>
Date: Wed, 1 Jul 2009 14:17:16 +0800
Subject: [ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfig

Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig.
Since they're similar platform and servicing for same SoC family.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/configs/littleton_defconfig |  783 --------------------
 arch/arm/configs/pxa3xx_defconfig    | 1332 ++++++++++++++++++++++++++++++++++
 arch/arm/configs/zylonite_defconfig  |  736 -------------------
 3 files changed, 1332 insertions(+), 1519 deletions(-)
 delete mode 100644 arch/arm/configs/littleton_defconfig
 create mode 100644 arch/arm/configs/pxa3xx_defconfig
 delete mode 100644 arch/arm/configs/zylonite_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig
deleted file mode 100644
index 1db49690805..00000000000
--- a/arch/arm/configs/littleton_defconfig
+++ /dev/null
@@ -1,783 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Fri Dec 21 11:06:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-CONFIG_MACH_LITTLETON=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
new file mode 100644
index 00000000000..733b851e5b7
--- /dev/null
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -0,0 +1,1332 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Mon Jul 13 22:48:49 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+CONFIG_CPU_PXA930=y
+CONFIG_CPU_PXA935=y
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+CONFIG_MACH_ZYLONITE=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_PXA930_ROTARY=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PXA930_TRKBALL=y
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MAX7301=y
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_DA903X=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig
deleted file mode 100644
index 7949d04a360..00000000000
--- a/arch/arm/configs/zylonite_defconfig
+++ /dev/null
@@ -1,736 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Tue Oct 23 13:33:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-- 
cgit v1.2.3


From 43c6342b1562cc27d8ba1240220cb887ad0e36f0 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 8 Aug 2009 23:07:20 +0200
Subject: [ARM] pxa/dma: cosmetic move of EXPORT_SYMBOL under their functions

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/dma.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 70aeee407f7..897663dbc5f 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -71,6 +71,7 @@ int pxa_request_dma (char *name, pxa_dma_prio prio,
 	local_irq_restore(flags);
 	return i;
 }
+EXPORT_SYMBOL(pxa_request_dma);
 
 void pxa_free_dma (int dma_ch)
 {
@@ -88,6 +89,7 @@ void pxa_free_dma (int dma_ch)
 	dma_channels[dma_ch].name = NULL;
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(pxa_free_dma);
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
@@ -139,6 +141,3 @@ int __init pxa_init_dma(int irq, int num_ch)
 	num_dma_channels = num_ch;
 	return 0;
 }
-
-EXPORT_SYMBOL(pxa_request_dma);
-EXPORT_SYMBOL(pxa_free_dma);
-- 
cgit v1.2.3


From d46f5e4a20867da84d12a35407cf7dcc8713c9cc Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 8 Aug 2009 23:07:21 +0200
Subject: [ARM] pxa/dma: optimize irq handler loop

Reduce loop for dma irq handler callbacks to the minimum
required.

Since V1: included suggestion from Nicolas Pitre to improve
even further the loop.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/dma.c | 29 +++++++++++++++--------------
 1 file changed, 15 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 897663dbc5f..56b51cf0718 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -94,20 +94,21 @@ EXPORT_SYMBOL(pxa_free_dma);
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
 	int i, dint = DINT;
-
-	for (i = 0; i < num_dma_channels; i++) {
-		if (dint & (1 << i)) {
-			struct dma_channel *channel = &dma_channels[i];
-			if (channel->name && channel->irq_handler) {
-				channel->irq_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
-				DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-			}
+	struct dma_channel *channel;
+
+	while (dint) {
+		i = __ffs(dint);
+		dint &= (dint - 1);
+		channel = &dma_channels[i];
+		if (channel->name && channel->irq_handler) {
+			channel->irq_handler(i, channel->data);
+		} else {
+			/*
+			 * IRQ for an unregistered DMA channel:
+			 * let's clear the interrupts and disable it.
+			 */
+			printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+			DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
 		}
 	}
 	return IRQ_HANDLED;
-- 
cgit v1.2.3


From d294948c2ce4e1c85f452154469752cc9b8e876d Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Sat, 8 Aug 2009 23:07:22 +0200
Subject: [ARM] pxa/dma: add debugfs entries

Add some debug information for PXA DMA :
 - descriptors queued
 - channels state
 - global state

--
Since V1: reverted to old register access (no more dma_readl() or dma_writel()).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/dma.c | 249 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 248 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 56b51cf0718..2975798d411 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -17,22 +17,266 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/memory.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
 
+#define DMA_DEBUG_NAME		"pxa_dma"
+#define DMA_MAX_REQUESTERS	64
+
 struct dma_channel {
 	char *name;
 	pxa_dma_prio prio;
 	void (*irq_handler)(int, void *);
 	void *data;
+	spinlock_t lock;
 };
 
 static struct dma_channel *dma_channels;
 static int num_dma_channels;
 
+/*
+ * Debug fs
+ */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
+
+static int dbg_show_requester_chan(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i;
+	u32 drcmr;
+
+	pos += seq_printf(s, "DMA channel %d requesters list :\n", chan);
+	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
+		drcmr = DRCMR(i);
+		if ((drcmr & DRCMR_CHLNUM) == chan)
+			pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
+					  !!(drcmr & DRCMR_MAPVLD));
+	}
+	return pos;
+}
+
+static inline int dbg_burst_from_dcmd(u32 dcmd)
+{
+	int burst = (dcmd >> 16) & 0x3;
+
+	return burst ? 4 << burst : 0;
+}
+
+static int is_phys_valid(unsigned long addr)
+{
+	return pfn_valid(__phys_to_pfn(addr));
+}
+
+#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
+#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
+
+static int dbg_show_descriptors(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i, max_show = 20, burst, width;
+	u32 dcmd;
+	unsigned long phys_desc;
+	struct pxa_dma_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_channels[chan].lock, flags);
+	phys_desc = DDADR(chan);
+
+	pos += seq_printf(s, "DMA channel %d descriptors :\n", chan);
+	pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0);
+	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
+		desc = phys_to_virt(phys_desc);
+		dcmd = desc->dcmd;
+		burst = dbg_burst_from_dcmd(dcmd);
+		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+		pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
+				  i, phys_desc, desc);
+		pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
+		pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
+		pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
+		pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d"
+				  " width=%d len=%d)\n",
+				  dcmd,
+				  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+				  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+				  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+				  DCMD_STR(ENDIAN), burst, width,
+				  dcmd & DCMD_LENGTH);
+		phys_desc = desc->ddadr;
+	}
+	if (i == max_show)
+		pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
+				  i, phys_desc);
+	else
+		pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n",
+				  i, phys_desc, phys_desc == DDADR_STOP ?
+				  "DDADR_STOP" : "invalid");
+
+	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
+	return pos;
+}
+
+static int dbg_show_chan_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	u32 dcsr, dcmd;
+	int burst, width;
+	static char *str_prio[] = { "high", "normal", "low" };
+
+	dcsr = DCSR(chan);
+	dcmd = DCMD(chan);
+	burst = dbg_burst_from_dcmd(dcmd);
+	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+	pos += seq_printf(s, "DMA channel %d\n", chan);
+	pos += seq_printf(s, "\tPriority : %s\n",
+			  str_prio[dma_channels[chan].prio]);
+	pos += seq_printf(s, "\tUnaligned transfer bit: %s\n",
+			  DALGN & (1 << chan) ? "yes" : "no");
+	pos += seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+			  dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
+			  DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
+			  DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
+			  DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
+			  DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
+			  DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
+			  DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
+
+	pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d"
+			  " len=%d)\n",
+			  dcmd,
+			  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+			  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+			  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+			  DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
+	pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
+	pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
+	pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
+	return pos;
+}
+
+static int dbg_show_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+
+	/* basic device status */
+	pos += seq_printf(s, "DMA engine status\n");
+	pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
+
+	return pos;
+}
+
+#define DBGFS_FUNC_DECL(name) \
+static int dbg_open_##name(struct inode *inode, struct file *file) \
+{ \
+	return single_open(file, dbg_show_##name, inode->i_private); \
+} \
+static const struct file_operations dbg_fops_##name = { \
+	.owner		= THIS_MODULE, \
+	.open		= dbg_open_##name, \
+	.llseek		= seq_lseek, \
+	.read		= seq_read, \
+	.release	= single_release, \
+}
+
+DBGFS_FUNC_DECL(state);
+DBGFS_FUNC_DECL(chan_state);
+DBGFS_FUNC_DECL(descriptors);
+DBGFS_FUNC_DECL(requester_chan);
+
+static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
+{
+	char chan_name[11];
+	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
+	struct dentry *chan_reqs = NULL;
+	void *dt;
+
+	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
+	chan = debugfs_create_dir(chan_name, chandir);
+	dt = (void *)ch;
+
+	if (chan)
+		chan_state = debugfs_create_file("state", 0400, chan, dt,
+						 &dbg_fops_chan_state);
+	if (chan_state)
+		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
+						 &dbg_fops_descriptors);
+	if (chan_descr)
+		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
+						&dbg_fops_requester_chan);
+	if (!chan_reqs)
+		goto err_state;
+
+	return chan;
+
+err_state:
+	debugfs_remove_recursive(chan);
+	return NULL;
+}
+
+static void pxa_dma_init_debugfs(void)
+{
+	int i;
+	struct dentry *chandir;
+
+	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
+	if (IS_ERR(dbgfs_root) || !dbgfs_root)
+		goto err_root;
+
+	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
+					  &dbg_fops_state);
+	if (!dbgfs_state)
+		goto err_state;
+
+	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
+			     GFP_KERNEL);
+	if (!dbgfs_state)
+		goto err_alloc;
+
+	chandir = debugfs_create_dir("channels", dbgfs_root);
+	if (!chandir)
+		goto err_chandir;
+
+	for (i = 0; i < num_dma_channels; i++) {
+		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
+		if (!dbgfs_chan[i])
+			goto err_chans;
+	}
+
+	return;
+err_chans:
+err_chandir:
+	kfree(dbgfs_chan);
+err_alloc:
+err_state:
+	debugfs_remove_recursive(dbgfs_root);
+err_root:
+	pr_err("pxa_dma: debugfs is not available\n");
+}
+
+static void __exit pxa_dma_cleanup_debugfs(void)
+{
+	debugfs_remove_recursive(dbgfs_root);
+}
+#else
+static inline void pxa_dma_init_debugfs(void) {}
+static inline void pxa_dma_cleanup_debugfs(void) {}
+#endif
+
 int pxa_request_dma (char *name, pxa_dma_prio prio,
 			void (*irq_handler)(int, void *),
 			void *data)
@@ -130,6 +374,7 @@ int __init pxa_init_dma(int irq, int num_ch)
 	for (i = 0; i < num_ch; i++) {
 		DCSR(i) = 0;
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+		spin_lock_init(&dma_channels[i].lock);
 	}
 
 	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
@@ -138,7 +383,9 @@ int __init pxa_init_dma(int irq, int num_ch)
 		kfree(dma_channels);
 		return ret;
 	}
-
 	num_dma_channels = num_ch;
+
+	pxa_dma_init_debugfs();
+
 	return 0;
 }
-- 
cgit v1.2.3


From b405db6c015fe8e4c9d8199a0355bb16d95d7049 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Tue, 23 Jun 2009 23:21:03 +0200
Subject: [ARM] pxamci: add simple gpio controls

The MMC block needs 3 external datas to work :
 - is the MMC card put in "read-only mode" ?
 - is a MMC card inserted or removed ?
 - enable power towards the MMC card

Several platforms provide these controls through
gpios. Expand the platform_data to request and use these
gpios is set up by board code.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Pierre.Ossman <pierre@ossman.eu>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/mmc.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
index 6d1304c9270..02a69dc2ee6 100644
--- a/arch/arm/mach-pxa/include/mach/mmc.h
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -14,6 +14,11 @@ struct pxamci_platform_data {
 	int (*get_ro)(struct device *);
 	void (*setpower)(struct device *, unsigned int);
 	void (*exit)(struct device *, void *);
+	int gpio_card_detect;			/* gpio detecting card insertion */
+	int gpio_card_ro;			/* gpio detecting read only toggle */
+	bool gpio_card_ro_invert;		/* gpio ro is inverted */
+	int gpio_power;				/* gpio powering up MMC bus */
+	bool gpio_power_invert;			/* gpio power is inverted */
 };
 
 extern void pxa_set_mci_info(struct pxamci_platform_data *info);
-- 
cgit v1.2.3


From 7a648256b20c493c99757fe1d248daf7954647bc Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Mon, 6 Jul 2009 22:16:42 +0200
Subject: [ARM] pxa: factor pxamci gpio handling

Several boards use always the same pattern with pxamci :
request gpio, request irq for that gpio to detect MMC card
insertion, request gpio for read-only mode detection, etc
...

Now that pxamci provides platform_data to describe simple
gpio management of the MMC external controls, use it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: rpurdie@rpsys.net
Cc: drwyrm@gmail.com
Cc: sakoman@gmail.com
Cc: marek.vasut@gmail.com
Cc: s.hauer@pengutronix.de
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cm-x270.c          | 54 ++--------------------
 arch/arm/mach-pxa/cm-x300.c          | 71 +++++------------------------
 arch/arm/mach-pxa/colibri-pxa3xx.c   | 11 +++--
 arch/arm/mach-pxa/corgi.c            | 75 ++----------------------------
 arch/arm/mach-pxa/csb726.c           | 54 ++--------------------
 arch/arm/mach-pxa/em-x270.c          | 17 ++++---
 arch/arm/mach-pxa/gumstix.c          |  5 +-
 arch/arm/mach-pxa/idp.c              |  5 +-
 arch/arm/mach-pxa/imote2.c           |  3 ++
 arch/arm/mach-pxa/lubbock.c          | 13 ++++--
 arch/arm/mach-pxa/magician.c         | 49 ++++----------------
 arch/arm/mach-pxa/mainstone.c        | 11 +++--
 arch/arm/mach-pxa/mioa701.c          | 68 +++-------------------------
 arch/arm/mach-pxa/palmld.c           | 80 ++------------------------------
 arch/arm/mach-pxa/palmt5.c           | 80 ++------------------------------
 arch/arm/mach-pxa/palmte2.c          | 80 ++------------------------------
 arch/arm/mach-pxa/palmtx.c           | 80 ++------------------------------
 arch/arm/mach-pxa/palmz72.c          | 88 +++---------------------------------
 arch/arm/mach-pxa/pcm990-baseboard.c | 13 ++++--
 arch/arm/mach-pxa/poodle.c           | 53 ++++------------------
 arch/arm/mach-pxa/spitz.c            | 62 +++----------------------
 arch/arm/mach-pxa/tosa.c             | 82 +++------------------------------
 arch/arm/mach-pxa/trizeps4.c         |  3 ++
 arch/arm/mach-pxa/zylonite.c         |  3 ++
 24 files changed, 143 insertions(+), 917 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 1d2cec25391..59292181088 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -271,56 +271,12 @@ static inline void cmx270_init_ohci(void) {}
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static int cmx270_mci_init(struct device *dev,
-			   irq_handler_t cmx270_detect_int,
-			   void *data)
-{
-	int err;
-
-	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
-	if (err) {
-		dev_warn(dev, "power gpio unavailable\n");
-		return err;
-	}
-
-	gpio_direction_output(GPIO105_MMC_POWER, 0);
-
-	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		gpio_free(GPIO105_MMC_POWER);
-		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
-			" request MMC card detect IRQ\n");
-	}
-
-	return err;
-}
-
-static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		dev_dbg(dev, "power on\n");
-		gpio_set_value(GPIO105_MMC_POWER, 0);
-	} else {
-		gpio_set_value(GPIO105_MMC_POWER, 1);
-		dev_dbg(dev, "power off\n");
-	}
-}
-
-static void cmx270_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CMX270_MMC_IRQ, data);
-	gpio_free(GPIO105_MMC_POWER);
-}
-
 static struct pxamci_platform_data cmx270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cmx270_mci_init,
-	.setpower 	= cmx270_mci_setpower,
-	.exit		= cmx270_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO83_MMC_IRQ,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO105_MMC_POWER,
+	.gpio_power_invert	= 1,
 };
 
 static void __init cmx270_init_mmc(void)
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 465da26591b..aac2cda60e0 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -306,68 +306,21 @@ static void cm_x300_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci_init,
-	.exit		= cm_x300_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= cm_x300_mci_init,
+	.exit			= cm_x300_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
-static int cm_x300_mci2_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO85_MMC2_WP);
-}
-
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-			     void *data)
-{
-	int err;
-
-	/*
-	 * setup GPIO for CM-X300 MMC controller
-	 */
-	err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(GPIO82_MMC2_IRQ);
-
-	err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(GPIO85_MMC2_WP);
-
-	err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(GPIO85_MMC2_WP);
-err_request_wp:
-	gpio_free(GPIO82_MMC2_IRQ);
-err_request_cd:
-	return err;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-	free_irq(CM_X300_MMC2_IRQ, data);
-	gpio_free(GPIO82_MMC2_IRQ);
-	gpio_free(GPIO85_MMC2_WP);
-}
-
 static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci2_init,
-	.exit		= cm_x300_mci2_exit,
-	.get_ro		= cm_x300_mci2_ro,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC2_IRQ,
+	.gpio_card_ro		= GPIO85_MMC2_WP,
+	.gpio_power		= -1,
 };
 
 static void __init cm_x300_init_mmc(void)
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index ea34e34f8cd..2c846bbfc43 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -95,10 +95,13 @@ static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init		= colibri_pxa3xx_mci_init,
-	.exit		= colibri_pxa3xx_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init			= colibri_pxa3xx_mci_init,
+	.exit			= colibri_pxa3xx_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 5363e1aea3f..39a94585f97 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -307,77 +307,11 @@ static struct platform_device corgiled_device = {
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data corgi_mci_platform_data;
-
-static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
-	gpio_direction_input(CORGI_GPIO_nSD_WP);
-	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
-
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-				IRQF_DISABLED | IRQF_TRIGGER_RISING |
-				IRQF_TRIGGER_FALLING,
-				"MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_3;
-	}
-	return 0;
-
-err_free_3:
-	gpio_free(CORGI_GPIO_SD_PWR);
-err_free_2:
-	gpio_free(CORGI_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
-static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
-}
-
-static int corgi_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CORGI_GPIO_nSD_WP);
-}
-
-static void corgi_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(CORGI_GPIO_SD_PWR);
-	gpio_free(CORGI_GPIO_nSD_WP);
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data corgi_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= corgi_mci_init,
-	.get_ro		= corgi_mci_get_ro,
-	.setpower 	= corgi_mci_setpower,
-	.exit		= corgi_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
+	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
 
 
@@ -636,6 +570,7 @@ static void __init corgi_init(void)
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 7d3e1b46e55..79141f86272 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -130,61 +130,17 @@ static struct pxamci_platform_data csb726_mci_data;
 static int csb726_mci_init(struct device *dev,
 		irq_handler_t detect, void *data)
 {
-	int err;
-
 	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-
-	err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
-	if (err)
-		goto err_det_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
-	if (err)
-		goto err_det_dir;
-
-	err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
-	if (err)
-		goto err_ro_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_RO);
-	if (err)
-		goto err_ro_dir;
-
-	err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
-			IRQF_DISABLED, "MMC card detect", data);
-	if (err)
-		goto err_irq;
-
 	return 0;
-
-err_irq:
-err_ro_dir:
-	gpio_free(CSB726_GPIO_MMC_RO);
-err_ro_req:
-err_det_dir:
-	gpio_free(CSB726_GPIO_MMC_DETECT);
-err_det_req:
-	return err;
-}
-
-static int csb726_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CSB726_GPIO_MMC_RO);
-}
-
-static void csb726_mci_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
-	gpio_free(CSB726_GPIO_MMC_RO);
-	gpio_free(CSB726_GPIO_MMC_DETECT);
 }
 
 static struct pxamci_platform_data csb726_mci = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init		= csb726_mci_init,
-	.get_ro		= csb726_mci_get_ro,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init			= csb726_mci_init,
 	/* FIXME setpower */
-	.exit		= csb726_mci_exit,
+	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
+	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data csb726_ohci_platform_data = {
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9cd09465a0e..e0121f4fcaf 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -646,13 +646,16 @@ static int em_x270_mci_get_ro(struct device *dev)
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
-			  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
-			  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
-			  MMC_VDD_30_31|MMC_VDD_31_32,
-	.init 		= em_x270_mci_init,
-	.setpower 	= em_x270_mci_setpower,
-	.exit		= em_x270_mci_exit,
+	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+				  MMC_VDD_30_31|MMC_VDD_31_32,
+	.init 			= em_x270_mci_init,
+	.setpower 		= em_x270_mci_setpower,
+	.exit			= em_x270_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init em_x270_init_mmc(void)
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index ca9912ea78d..1708c010984 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -88,7 +88,10 @@ static struct platform_device *devices[] __initdata = {
 
 #ifdef CONFIG_MMC_PXA
 static struct pxamci_platform_data gumstix_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect 	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init gumstix_mmc_init(void)
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6243b59d9b..b6486ef20b1 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -168,7 +168,10 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 };
 
 static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init idp_init(void)
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 961807dc646..2a4945db31c 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -389,6 +389,9 @@ static int imote2_mci_get_ro(struct device *dev)
 static struct pxamci_platform_data imote2_mci_platform_data = {
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
 	.get_ro = imote2_mci_get_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power = -1,
 };
 
 static struct mtd_partition imote2flash_partitions[] = {
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index f04c8333dff..1785cc9494d 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -482,11 +482,14 @@ static void lubbock_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay	= 1,
-	.init 		= lubbock_mci_init,
-	.get_ro		= lubbock_mci_get_ro,
-	.exit 		= lubbock_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay		= 1,
+	.init 			= lubbock_mci_init,
+	.get_ro			= lubbock_mci_get_ro,
+	.exit 			= lubbock_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index ca39669cffc..0daba43d7ca 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -651,55 +651,24 @@ static struct platform_device bq24022 = {
 static int magician_mci_init(struct device *dev,
 				irq_handler_t detect_irq, void *data)
 {
-	int err;
-
-	err = request_irq(IRQ_MAGICIAN_SD, detect_irq,
+	return request_irq(IRQ_MAGICIAN_SD, detect_irq,
 				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-				"MMC card detect", data);
-	if (err)
-		goto err_request_irq;
-	err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER");
-	if (err)
-		goto err_request_power;
-	err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY");
-	if (err)
-		goto err_request_readonly;
-
-	return 0;
-
-err_request_readonly:
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
-err_request_power:
-	free_irq(IRQ_MAGICIAN_SD, data);
-err_request_irq:
-	return err;
-}
-
-static void magician_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *pdata = dev->platform_data;
-
-	gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
-}
-
-static int magician_mci_get_ro(struct device *dev)
-{
-	return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
+				"mmc card detect", data);
 }
 
 static void magician_mci_exit(struct device *dev, void *data)
 {
-	gpio_free(EGPIO_MAGICIAN_nSD_READONLY);
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
 	free_irq(IRQ_MAGICIAN_SD, data);
 }
 
 static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     = magician_mci_init,
-	.get_ro   = magician_mci_get_ro,
-	.setpower = magician_mci_setpower,
-	.exit     = magician_mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init     		= magician_mci_init,
+	.exit     		= magician_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
+	.gpio_card_ro_invert	= 1,
+	.gpio_power		= EGPIO_MAGICIAN_SD_POWER,
 };
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f4dabf0273c..f7dc23078ce 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -450,10 +450,13 @@ static void mainstone_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= mainstone_mci_init,
-	.setpower 	= mainstone_mci_setpower,
-	.exit		= mainstone_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= mainstone_mci_init,
+	.setpower 		= mainstone_mci_setpower,
+	.exit			= mainstone_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2d28132c725..a8122ecd2a3 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -434,72 +434,15 @@ struct gpio_vbus_mach_info gpio_vbus_data = {
 /*
  * SDIO/MMC Card controller
  */
-static void mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		gpio_set_value(GPIO91_SDIO_EN, 1);	/* enable SDIO power */
-	else
-		gpio_set_value(GPIO91_SDIO_EN, 0);	/* disable SDIO power */
-}
-
-static int mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO78_SDIO_RO);
-}
-
-struct gpio_ress mci_gpios[] = {
-	MIO_GPIO_IN(GPIO78_SDIO_RO, 	"SDIO readonly detect"),
-	MIO_GPIO_IN(GPIO15_SDIO_INSERT,	"SDIO insertion detect"),
-	MIO_GPIO_OUT(GPIO91_SDIO_EN, 0,	"SDIO power enable")
-};
-
-static void mci_exit(struct device *dev, void *data)
-{
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-	free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
-}
-
-static struct pxamci_platform_data mioa701_mci_info;
-
 /**
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
-{
-	int rc;
-	int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
-
-	rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
-	if (rc)
-		goto err_gpio;
-	/* enable RE/FE interrupt on card insertion and removal */
-	rc = request_irq(irq, detect_int,
-			 IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			 IRQF_TRIGGER_FALLING,
-			 "MMC card detect", data);
-	if (rc)
-		goto err_irq;
-
-	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
-	return 0;
-
-err_irq:
-	dev_err(dev, "mioa701_mci_init: MMC/SD:"
-		" can't request MMC card detect IRQ\n");
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-err_gpio:
-	return rc;
-}
-
 static struct pxamci_platform_data mioa701_mci_info = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init	  = mci_init,
-	.get_ro	  = mci_get_ro,
-	.setpower = mci_setpower,
-	.exit	  = mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO15_SDIO_INSERT,
+	.gpio_card_ro		= GPIO78_SDIO_RO,
+	.gpio_power		= GPIO91_SDIO_EN,
 };
 
 /* FlashRAM */
@@ -841,7 +784,7 @@ static void mioa701_restart(char c, const char *cmd)
 static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
-	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
 };
 
 static void __init mioa701_machine_init(void)
@@ -855,6 +798,7 @@ static void __init mioa701_machine_init(void)
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
+	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 169fcc18154..445749198cd 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -143,83 +143,11 @@ static unsigned long palmld_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
-			palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmld_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-}
-
-static void palmld_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmld_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmld_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmld_mci_power,
-	.get_ro		= palmld_mci_get_ro,
-	.init 		= palmld_mci_init,
-	.exit		= palmld_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 33f726ff55e..42d0528d3e9 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -124,83 +124,11 @@ static unsigned long palmt5_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
-			palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmt5_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-	free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-}
-
-static void palmt5_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmt5_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmt5_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmt5_mci_power,
-	.get_ro		= palmt5_mci_get_ro,
-	.init 		= palmt5_mci_init,
-	.exit		= palmt5_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index d823b09801d..d9ef76c9278 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -117,83 +117,11 @@ static unsigned long palmte2_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmte2_mci_init(struct device *dev,
-				irq_handler_t palmte2_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
-			palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmte2_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-}
-
-static void palmte2_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmte2_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmte2_mci_power,
-	.get_ro		= palmte2_mci_get_ro,
-	.init 		= palmte2_mci_init,
-	.exit		= palmte2_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTE2_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTE2_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTE2_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 83d02087958..4a9ca718962 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -140,83 +140,11 @@ static unsigned long palmtx_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
-			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmtx_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-}
-
-static void palmtx_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmtx_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmtx_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmtx_mci_power,
-	.get_ro		= palmtx_mci_get_ro,
-	.init 		= palmtx_mci_init,
-	.exit		= palmtx_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c3645aa3fa3..d8fa53c1917 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -129,88 +129,14 @@ static unsigned long palmz72_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmz72_mci_init(struct device *dev,
-				irq_handler_t palmz72_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
-			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	/* SD_POWER is not actually power, but it is more like chip
-	 * select, i.e. it is inverted */
-
-	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	if (err)
-		goto err4;
-	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-err4:
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmz72_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-}
-
-static void palmz72_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	if (p_d->ocr_mask & (1 << vdd))
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	else
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
-}
-
-static int palmz72_mci_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
-}
-
+/* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
 static struct pxamci_platform_data palmz72_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmz72_mci_power,
-	.get_ro		= palmz72_mci_ro,
-	.init 		= palmz72_mci_init,
-	.exit		= palmz72_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMZ72_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMZ72_SD_RO,
+	.gpio_power		= GPIO_NR_PALMZ72_SD_POWER_N,
+	.gpio_power_invert	= 1,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 01791d74e08..e211633471f 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -321,11 +321,14 @@ static void pcm990_mci_exit(struct device *dev, void *data)
 #define MSECS_PER_JIFFY (1000/HZ)
 
 static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay	= 250 / MSECS_PER_JIFFY,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= pcm990_mci_init,
-	.setpower 	= pcm990_mci_setpower,
-	.exit		= pcm990_mci_exit,
+	.detect_delay		= 250 / MSECS_PER_JIFFY,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 			= pcm990_mci_init,
+	.setpower 		= pcm990_mci_setpower,
+	.exit			= pcm990_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data pcm990_ohci_platform_data = {
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 9352d4a3483..333b1dc2dd3 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -245,20 +245,10 @@ static inline void poodle_init_spi(void) {}
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data poodle_mci_platform_data;
-
 static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
 {
 	int err;
 
-	err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
 	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
 	if (err)
 		goto err_free_2;
@@ -267,34 +257,14 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
 	if (err)
 		goto err_free_3;
 
-	gpio_direction_input(POODLE_GPIO_nSD_DETECT);
-	gpio_direction_input(POODLE_GPIO_nSD_WP);
-
 	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
 	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
 
-	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_4;
-	}
-
 	return 0;
 
-err_free_4:
-	gpio_free(POODLE_GPIO_SD_PWR1);
 err_free_3:
 	gpio_free(POODLE_GPIO_SD_PWR);
 err_free_2:
-	gpio_free(POODLE_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(POODLE_GPIO_nSD_DETECT);
-err_out:
 	return err;
 }
 
@@ -312,28 +282,20 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 	}
 }
 
-static int poodle_mci_get_ro(struct device *dev)
-{
-	return !!gpio_get_value(POODLE_GPIO_nSD_WP);
-	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
-}
-
-
 static void poodle_mci_exit(struct device *dev, void *data)
 {
-	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
 	gpio_free(POODLE_GPIO_SD_PWR1);
 	gpio_free(POODLE_GPIO_SD_PWR);
-	gpio_free(POODLE_GPIO_nSD_WP);
-	gpio_free(POODLE_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= poodle_mci_init,
-	.get_ro		= poodle_mci_get_ro,
-	.setpower 	= poodle_mci_setpower,
-	.exit		= poodle_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= poodle_mci_init,
+	.setpower 		= poodle_mci_setpower,
+	.exit			= poodle_mci_exit,
+	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
@@ -521,6 +483,7 @@ static void __init poodle_init(void)
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
+	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dda310fe71c..da85327e630 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -378,45 +378,6 @@ static inline void spitz_init_spi(void) {}
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-
-static struct pxamci_platform_data spitz_mci_platform_data;
-
-static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
-	gpio_direction_input(SPITZ_GPIO_nSD_WP);
-
-	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			  IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_2;
-	}
-	return 0;
-
-err_free_2:
-	gpio_free(SPITZ_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
@@ -427,24 +388,12 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
 }
 
-static int spitz_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(SPITZ_GPIO_nSD_WP);
-}
-
-static void spitz_mci_exit(struct device *dev, void *data)
-{
-	free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(SPITZ_GPIO_nSD_WP);
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data spitz_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= spitz_mci_init,
-	.get_ro		= spitz_mci_get_ro,
-	.setpower 	= spitz_mci_setpower,
-	.exit		= spitz_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 		= spitz_mci_setpower,
+	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
@@ -695,6 +644,7 @@ static void __init common_init(void)
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 117ad5920e5..b56cc5667bb 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -247,49 +247,10 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 /*
  * MMC/SD Device
  */
-static struct pxamci_platform_data tosa_mci_platform_data;
-
 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
 {
 	int err;
 
-	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
-		goto err_gpio_detect;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
-	if (err)
-		goto err_gpio_detect_dir;
-
-	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				"MMC/SD card detect", data);
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		goto err_irq;
-	}
-
-	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
-		goto err_gpio_wp;
-	}
-	err = gpio_direction_input(TOSA_GPIO_SD_WP);
-	if (err)
-		goto err_gpio_wp_dir;
-
-	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_pwr;
-	}
-	err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
-	if (err)
-		goto err_gpio_pwr_dir;
-
 	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
@@ -304,51 +265,21 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 err_gpio_int_dir:
 	gpio_free(TOSA_GPIO_nSD_INT);
 err_gpio_int:
-err_gpio_pwr_dir:
-	gpio_free(TOSA_GPIO_PWR_ON);
-err_gpio_pwr:
-err_gpio_wp_dir:
-	gpio_free(TOSA_GPIO_SD_WP);
-err_gpio_wp:
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-err_irq:
-err_gpio_detect_dir:
-	gpio_free(TOSA_GPIO_nSD_DETECT);
-err_gpio_detect:
 	return err;
 }
 
-static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 1);
-	} else {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 0);
-	}
-}
-
-static int tosa_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(TOSA_GPIO_SD_WP);
-}
-
 static void tosa_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(TOSA_GPIO_nSD_INT);
-	gpio_free(TOSA_GPIO_PWR_ON);
-	gpio_free(TOSA_GPIO_SD_WP);
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
-	.ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           = tosa_mci_init,
-	.get_ro		= tosa_mci_get_ro,
-	.setpower       = tosa_mci_setpower,
-	.exit           = tosa_mci_exit,
+	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init           	= tosa_mci_init,
+	.exit           	= tosa_mci_exit,
+	.gpio_card_detect	= TOSA_GPIO_nSD_DETECT,
+	.gpio_card_ro		= TOSA_GPIO_SD_WP,
+	.gpio_power		= TOSA_GPIO_PWR_ON,
 };
 
 /*
@@ -910,6 +841,7 @@ static void __init tosa_init(void)
 	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
+	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 825f540176d..32299869b35 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -367,6 +367,9 @@ static struct pxamci_platform_data trizeps4_mci_platform_data = {
 	.exit		= trizeps4_mci_exit,
 	.get_ro		= NULL,	/* write-protection not supported */
 	.setpower 	= NULL,	/* power-switching not supported */
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 /****************************************************************************
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 218d2001f1d..09784d3954e 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -290,6 +290,9 @@ static struct pxamci_platform_data zylonite_mci_platform_data = {
 	.init 		= zylonite_mci_init,
 	.exit		= zylonite_mci_exit,
 	.get_ro		= zylonite_mci_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
-- 
cgit v1.2.3


From 70f6d3e8a6670d1cccab5e206315b935eb62a08e Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Mon, 13 Jul 2009 22:57:56 +0800
Subject: [ARM] pxa/littleton: update littleton to use the new gpio_card_detect
 for mmc

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/littleton.c | 43 +++++--------------------------------------
 1 file changed, 5 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 55b3788fd1a..13848955d13 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -265,45 +265,12 @@ static inline void littleton_init_keypad(void) {}
 #endif
 
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int littleton_mci_init(struct device *dev,
-			      irq_handler_t littleton_detect_int, void *data)
-{
-	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-
-	gpio_direction_input(gpio_cd);
-
-	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "mmc card detect", data);
-	if (err) {
-		dev_err(dev, "failed to request card detect IRQ\n");
-		goto err_request_irq;
-	}
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void littleton_mci_exit(struct device *dev, void *data)
-{
-	int gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	free_irq(gpio_to_irq(gpio_cd), data);
-	gpio_free(gpio_cd);
-}
-
 static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= littleton_mci_init,
-	.exit		= littleton_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init littleton_init_mmc(void)
-- 
cgit v1.2.3


From 0d95c1fa5661b11cf7777af2613563cc3c683d8d Mon Sep 17 00:00:00 2001
From: Daniel Ribeiro <drwyrm@gmail.com>
Date: Tue, 23 Jun 2009 12:39:25 -0300
Subject: [ARM] pxa/ezx: set IRQ_BOARD_END for EZX

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig             | 1 +
 arch/arm/mach-pxa/include/mach/irqs.h | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 626cecb6e73..32e44b3a8fb 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -463,6 +463,7 @@ config PXA_EZX
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 7af0de4bf65..567204c3959 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -129,6 +129,8 @@
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
 #elif defined(CONFIG_MACH_ZYLONITE)
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#elif defined(CONFIG_PXA_EZX)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 23)
 #else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 #endif
-- 
cgit v1.2.3


From 53740df16f42163255031d24d99ba207a9ac81a9 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Wed, 17 Jun 2009 10:32:54 +0200
Subject: [ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards

NAND feature will be enabled when the appropriate config option is set.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa300.c       |  1 +
 arch/arm/mach-pxa/colibri-pxa320.c       |  1 +
 arch/arm/mach-pxa/colibri-pxa3xx.c       | 41 ++++++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/colibri.h |  6 +++++
 4 files changed, 49 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 7c9c34c19ae..37c239c5656 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -172,6 +172,7 @@ void __init colibri_pxa300_init(void)
 {
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa300_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa310_init_ac97();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index a18d37b3c5e..458c1a147b6 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -168,6 +168,7 @@ void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa320_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa320_init_ac97();
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 2c846bbfc43..efebaf4d734 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,6 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -157,3 +158,43 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 }
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition colibri_nand_partitions[] = {
+	{
+		.name        = "bootloader",
+		.offset      = 0,
+		.size        = SZ_512K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.parts		= colibri_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+	pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index a88d7caff0d..811743c5614 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -23,6 +23,12 @@ static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
 extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-- 
cgit v1.2.3


From ecc85e166fbec0378215aab13925b0e980a48d1e Mon Sep 17 00:00:00 2001
From: Alex Roman <alex.roman@gmail.com>
Date: Fri, 3 Jul 2009 14:58:59 +0800
Subject: [ARM] pxa/colibri: add UART MFP configuration for the PXA320 module

This patch configures the MFP pads for UART1, UART2, UART3 for the
Toradex Colibri PXA320 module. Previously they were just not
configured resulting in just the first UART working because it was the
only one that was configured by the bootloader (Toradex EBOOT in our
case).

This patch is against vanilla 2.6.30 and has been tested with the
Toradex Orchid carrier board (all three UARTs were functional).

Signed-off-by: Alex Roman <alex.roman@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/colibri-pxa320.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 458c1a147b6..494572825c7 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -164,6 +164,37 @@ static inline void __init colibri_pxa320_init_ac97(void)
 static inline void colibri_pxa320_init_ac97(void) {}
 #endif
 
+/*
+ * The following configuration is verified to work with the Toradex Orchid
+ * carrier board
+ */
+static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
+	/* UART 1 configuration (may be set by bootloader) */
+	GPIO99_UART1_CTS,
+	GPIO104_UART1_RTS,
+	GPIO97_UART1_RXD,
+	GPIO98_UART1_TXD,
+	GPIO101_UART1_DTR,
+	GPIO103_UART1_DSR,
+	GPIO100_UART1_DCD,
+	GPIO102_UART1_RI,
+
+	/* UART 2 configuration */
+	GPIO109_UART2_CTS,
+	GPIO112_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+
+	/* UART 3 configuration */
+	GPIO30_UART3_RXD,
+	GPIO31_UART3_TXD,
+};
+
+static void __init colibri_pxa320_init_uart(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
+}
+
 void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
@@ -174,6 +205,7 @@ void __init colibri_pxa320_init(void)
 	colibri_pxa320_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
+	colibri_pxa320_init_uart();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-- 
cgit v1.2.3


From 4a3d3abe91963d7b3e562e70fc6c5c9d3f76fb30 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 13 May 2009 11:33:43 +0200
Subject: [ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/pcm990-baseboard.c | 54 +++++++++++++++++++++++++++++-------
 1 file changed, 44 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index e211633471f..bbda57078e0 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -430,25 +430,56 @@ static void pcm990_camera_free_bus(struct soc_camera_link *link)
 	gpio_bus_switch = -EINVAL;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match with the camera ID above */
-	.query_bus_param = pcm990_camera_query_bus_param,
-	.set_bus_param = pcm990_camera_set_bus_param,
-	.free_bus = pcm990_camera_free_bus,
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 	{
 		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("pca9536", 0x41),
 		.platform_data = &pca9536_data,
-	}, {
+	},
+};
+
+static struct i2c_board_info pcm990_camera_i2c[] = {
+	{
 		I2C_BOARD_INFO("mt9v022", 0x48),
-		.platform_data = &iclink, /* With extender */
 	}, {
 		I2C_BOARD_INFO("mt9m001", 0x5d),
-		.platform_data = &iclink, /* With extender */
+	},
+};
+
+static struct soc_camera_link iclink[] = {
+	{
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[0],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9v022",
+	}, {
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[1],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9m001",
+	},
+};
+
+static struct platform_device pcm990_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &iclink[0],
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &iclink[1],
+		},
 	},
 };
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
@@ -504,6 +535,9 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
+
+	platform_device_register(&pcm990_camera[0]);
+	platform_device_register(&pcm990_camera[1]);
 #endif
 
 	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
-- 
cgit v1.2.3


From a48c24a696f0d93c49f913b7818e9819612b1f4e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Fri, 24 Apr 2009 18:40:27 +0200
Subject: [ARM] pxa/mioa701: convert mioa701 to the new platform-device
 soc-camera interface

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/mioa701.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index a8122ecd2a3..3cab452e556 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -708,19 +708,20 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
 	},
 };
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match id in pxa27x_device_camera in device.c */
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
 	{
-		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("mt9m111", 0x5d),
-		.platform_data = &iclink,
 	},
 };
 
+static struct soc_camera_link iclink = {
+	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
+	.board_info	= &mioa701_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
 struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
@@ -754,6 +755,7 @@ MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
+MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -764,6 +766,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_dev,
 	&strataflash,
 	&gpio_vbus,
+	&mioa701_camera,
 	&mioa701_board,
 };
 
@@ -813,7 +816,6 @@ static void __init mioa701_machine_init(void)
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }
 
 static void mioa701_machine_exit(void)
-- 
cgit v1.2.3


From 489db6a662af5ca1b6574bae2d974017346bb983 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 12 May 2009 18:12:29 +0200
Subject: [ARM] pxa/em-x270: convert em-x270 to soc-camera as platform-device

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/em-x270.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index e0121f4fcaf..2ed1dfe194b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1025,22 +1025,32 @@ static int em_x270_sensor_power(struct device *dev, int on)
 	return 0;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0,
-	.power = em_x270_sensor_power,
-};
-
 static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x48),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,
+	.power		= em_x270_sensor_power,
+	.board_info	= &em_x270_i2c_cam_info[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
+static struct platform_device em_x270_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &iclink,
 	},
 };
 
 static void  __init em_x270_init_camera(void)
 {
-	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
+	platform_device_register(&em_x270_camera);
 }
 #else
 static inline void em_x270_init_camera(void) {}
-- 
cgit v1.2.3


From 9cf97b1beeb8596b1e923642e3f2af949fc68082 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Sun, 26 Jul 2009 13:48:39 +0300
Subject: [ARM] pxa/em-x270: remove debug leftovers

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/em-x270.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2ed1dfe194b..8614cabd2dd 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1258,7 +1258,6 @@ static void __init em_x270_init_i2c(void)
 
 static void __init em_x270_module_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
 	mmc_cd = GPIO13_MMC_CD;
@@ -1270,7 +1269,6 @@ static void __init em_x270_module_init(void)
 
 static void __init em_x270_exeda_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
 
 	mmc_cd = GPIO114_MMC_CD;
-- 
cgit v1.2.3


From 100a1d250d3806caa97b08d04cb558372c8e8097 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Sun, 26 Jul 2009 13:48:40 +0300
Subject: [ARM] pxa/em-x270: add vcc_core regulator

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/em-x270.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 8614cabd2dd..aec7f4214b1 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1116,6 +1116,7 @@ REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
 REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
 REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
 
 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
 	static struct regulator_init_data _ldo##_data = {		\
@@ -1138,6 +1139,7 @@ REGULATOR_INIT(ldo10, 2000000, 3200000,
 	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
 REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
 REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
 
 struct led_info em_x270_led_info = {
 	.name = "em-x270:orange",
@@ -1207,6 +1209,8 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = {
 	DA9030_LDO(12),
 	DA9030_LDO(19),
 
+	DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
 	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
 	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
 	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
-- 
cgit v1.2.3


From a2099e49f4f8728b0c0301a4e3eb650644ee9206 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Mon, 3 Aug 2009 12:07:52 +0300
Subject: [ARM] pxa/cm-x270: add libertas device registration

v2 changes:
- use gpio_to_irq instead of IRQ_GPIO
- check gpio_direction_output return value to be on the safe side :)

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cm-x270.c | 110 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 108 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 59292181088..eea78b6c2bc 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -13,13 +13,18 @@
 #include <linux/sysdev.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+
 #include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
@@ -34,6 +39,10 @@
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
 
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP	(19)
+#define GPIO102_WLAN_RST	(102)
+
 static unsigned long cmx270_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
@@ -94,8 +103,8 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO26_SSP1_RXD,
 
 	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_SSP2_SFRM,
+	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
+	GPIO14_GPIO,
 	GPIO87_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
@@ -123,6 +132,7 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
 	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
 	GPIO53_GPIO,				/* PC card reset */
+	GPIO102_GPIO,				/* WLAN reset */
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
@@ -131,6 +141,7 @@ static unsigned long cmx270_pin_config[] = {
 	/* interrupts */
 	GPIO10_GPIO,	/* DM9000 interrupt */
 	GPIO83_GPIO,	/* MMC card detect */
+	GPIO95_GPIO,	/* WLAN interrupt */
 };
 
 /* V3020 RTC */
@@ -287,6 +298,100 @@ static void __init cmx270_init_mmc(void)
 static inline void cmx270_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 1000,
+	.gpio_cs	= 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_GPIO,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+};
+
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		return err;
+
+	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+	if (err)
+		goto err_free_strap;
+
+	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+	gpio_set_value(GPIO102_WLAN_RST, 1);
+	msleep(100);
+
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return err;
+}
+
+static int cm_x270_libertas_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO102_WLAN_RST, 0);
+	gpio_free(GPIO102_WLAN_RST);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return 0;
+}
+
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= cm_x270_libertas_setup,
+	.teardown		= cm_x270_libertas_teardown,
+};
+
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+	{
+		.modalias		= "libertas_spi",
+		.max_speed_hz		= 13000000,
+		.bus_num		= 2,
+		.irq			= gpio_to_irq(95),
+		.chip_select		= 0,
+		.controller_data	= &cm_x270_libertas_chip,
+		.platform_data		= &cm_x270_libertas_pdata,
+	},
+};
+
+static void __init cmx270_init_spi(void)
+{
+	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
+}
+#else
+static inline void cmx270_init_spi(void) {}
+#endif
+
 void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
@@ -299,4 +404,5 @@ void __init cmx270_init(void)
 	cmx270_init_mmc();
 	cmx270_init_ohci();
 	cmx270_init_2700G();
+	cmx270_init_spi();
 }
-- 
cgit v1.2.3


From 9845b6b15cf03ae3f473c39a13f2454abad50e09 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 16 Jul 2009 19:38:41 +0200
Subject: [ARM] pxa/palm: add detect_delay to mmc for PalmTX,T5,LD

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmld.c | 1 +
 arch/arm/mach-pxa/palmt5.c | 1 +
 arch/arm/mach-pxa/palmtx.c | 1 +
 3 files changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 445749198cd..08c599b49d8 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -148,6 +148,7 @@ static struct pxamci_platform_data palmld_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 42d0528d3e9..88dcaac358a 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -129,6 +129,7 @@ static struct pxamci_platform_data palmt5_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4a9ca718962..fffa32a6fa3 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -145,6 +145,7 @@ static struct pxamci_platform_data palmtx_mci_platform_data = {
 	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
-- 
cgit v1.2.3


From d7c307cfe76ae0c0493fbdac417ef6e30221f61b Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 17 Jul 2009 19:46:58 +0200
Subject: [ARM] pxa/palm: Add NOR flash support for PalmLD

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmld.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 08c599b49d8..b3ae8b958ad 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -25,6 +25,9 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -140,6 +143,42 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO13_GPIO,	/* earphone detect */
 };
 
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmld_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmld_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmld_partitions,
+		.nr_parts	= ARRAY_SIZE(palmld_partitions)
+	}
+};
+
+static struct resource palmld_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_4M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmld_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmld_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmld_flash_data,
+	},
+};
+
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
@@ -489,6 +528,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_supply,
 	&palmld_asoc,
 	&palmld_hdd,
+	&palmld_flash,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
-- 
cgit v1.2.3


From 3eb37ff06ba189ce386d582179fc9abd37a92405 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 18 Jul 2009 16:51:41 +0200
Subject: [ARM] pxa/palm: add NAND Flash support for PalmTX

This patch adds support for NAND chip found in PalmTX handheld. Support
is implemented through the gen_nand driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/palmtx.h |  5 ++
 arch/arm/mach-pxa/palmtx.c              | 83 ++++++++++++++++++++++++++++++++-
 2 files changed, 86 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index e74082c872e..1be0db6ed55 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -82,6 +82,11 @@
 #define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
 #define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
 
+#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
+#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
+#define PALMTX_NAND_ALE_VIRT	0xff100000
+#define PALMTX_NAND_CLE_VIRT	0xff200000
+
 /* TOUCHSCREEN */
 #define AC97_LINK_FRAME			21
 
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fffa32a6fa3..052f99863da 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -28,6 +28,8 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -131,6 +133,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO34_FFUART_RXD,
 	GPIO39_FFUART_TXD,
 
+	/* NAND */
+	GPIO15_nCS_1,
+	GPIO18_RDY,
+
 	/* MISC. */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO12_GPIO,	/* power detect */
@@ -421,6 +427,68 @@ static struct pxafb_mach_info palmtx_lcd_screen = {
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+/******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, PALMTX_NAND_CLE_VIRT);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, PALMTX_NAND_ALE_VIRT);
+	else
+		writeb(cmd, nandaddr);
+}
+
+static struct mtd_partition palmtx_partition_info[] = {
+	[0] = {
+		.name	= "palmtx-0",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data palmtx_nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
+		.partitions		= palmtx_partition_info,
+		.chip_delay		= 20,
+		.part_probe_types 	= palmtx_part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= palmtx_nand_cmd_ctl,
+	},
+};
+
+static struct resource palmtx_nand_resource[] = {
+	[0]	= {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device palmtx_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
+	.resource	= palmtx_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmtx_nand_platdata,
+	}
+};
+
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
@@ -447,6 +515,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_supply,
 	&palmtx_asoc,
 	&palmtx_gpio_vbus,
+	&palmtx_nand,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -454,8 +523,18 @@ static struct map_desc palmtx_io_desc[] __initdata = {
 	.virtual	= PALMTX_PCMCIA_VIRT,
 	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
 	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE
-},
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_ALE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_CLE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}
 };
 
 static void __init palmtx_map_io(void)
-- 
cgit v1.2.3


From 91cf6a97b9a155081c455bd453b7ab889d31da03 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Mon, 27 Jul 2009 02:07:41 +0200
Subject: [ARM] pxa/palm: Add NOR Flash support for PalmTX

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/palmtx.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 052f99863da..c0aca18b71b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -30,6 +30,8 @@
 #include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -143,6 +145,42 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO107_GPIO,	/* earphone detect */
 };
 
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmtx_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmtx_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmtx_partitions,
+		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
+	}
+};
+
+static struct resource palmtx_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmtx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmtx_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmtx_flash_data,
+	},
+};
+
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
@@ -515,6 +553,7 @@ static struct platform_device *devices[] __initdata = {
 	&power_supply,
 	&palmtx_asoc,
 	&palmtx_gpio_vbus,
+	&palmtx_flash,
 	&palmtx_nand,
 };
 
-- 
cgit v1.2.3


From 5d783a2d592ce5fdc01292470059ed15998e404e Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 16 Jul 2009 13:26:48 +0200
Subject: [ARM] pxa: Palm Tungsten|C initial support

This patch adds basic support for Palm Tungsten|C handheld.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig               |   9 +
 arch/arm/mach-pxa/Makefile              |   1 +
 arch/arm/mach-pxa/include/mach/palmtc.h |  86 ++++++
 arch/arm/mach-pxa/palmtc.c              | 462 ++++++++++++++++++++++++++++++++
 4 files changed, 558 insertions(+)
 create mode 100644 arch/arm/mach-pxa/include/mach/palmtc.h
 create mode 100644 arch/arm/mach-pxa/palmtc.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 32e44b3a8fb..d1dcb1cf075 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -376,6 +376,15 @@ config MACH_PALMTE2
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 	  handheld computer.
 
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
 config MACH_PALMT5
 	bool "Palm Tungsten|T5"
 	default y
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d4c6122a342..aa8f83e9421 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
new file mode 100644
index 00000000000..3dc9b074ab4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -0,0 +1,86 @@
+/*
+ * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
+ *
+ * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *		Holger Bocklet <bitz.email@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTC_H_
+#define _INCLUDE_PALMTC_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
+#define GPIO_NR_PALMTC_CRADLE_DETECT	5
+#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
+
+/* SD/MMC */
+#define GPIO_NR_PALMTC_SD_DETECT_N	12
+#define GPIO_NR_PALMTC_SD_POWER		32
+#define GPIO_NR_PALMTC_SD_READONLY	54
+
+/* WLAN */
+#define GPIO_NR_PALMTC_PCMCIA_READY	13
+#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
+#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
+#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
+#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
+#define GPIO_NR_PALMTC_PCMCIA_RESET	78
+
+/* UDC */
+#define GPIO_NR_PALMTC_USB_DETECT_N	4
+#define GPIO_NR_PALMTC_USB_POWER	36
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTC_BL_POWER		16
+#define GPIO_NR_PALMTC_LCD_POWER	44
+#define GPIO_NR_PALMTC_LCD_BLANK	38
+
+/* UART */
+#define GPIO_NR_PALMTC_RS232_POWER	37
+
+/* IRDA */
+#define GPIO_NR_PALMTC_IR_DISABLE	45
+
+/* IRQs */
+#define IRQ_GPIO_PALMTC_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY	IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+
+/* UCB1400 GPIOs */
+#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
+#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
+#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
+#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
+#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
+
+/** HERE ARE INIT VALUES **/
+#define PALMTC_UCB1400_GPIO_OFFSET	0x80
+
+/* BATTERY */
+#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
+#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
+#define PALMTC_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
+
+#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTC_MAX_INTENSITY		0xFE
+#define PALMTC_DEFAULT_INTENSITY	0x7E
+#define PALMTC_LIMIT_MASK		0x7F
+#define PALMTC_PRESCALER		0x3F
+#define PALMTC_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
new file mode 100644
index 00000000000..f70f1f820ee
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -0,0 +1,462 @@
+/*
+ * linux/arch/arm/mach-pxa/palmtc.c
+ *
+ * Support for the Palm Tungsten|C
+ *
+ * Author:	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Petr Blaha <p3t3@centrum.cz>
+ *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/ucb1400.h>
+#include <linux/power_supply.h>
+#include <linux/gpio_keys.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtc.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtc_pin_config[] __initdata = {
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+	GPIO12_GPIO,	/* detect */
+	GPIO32_GPIO,	/* power */
+	GPIO54_GPIO,	/* r/o switch */
+
+	/* PCMCIA */
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO45_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO17_PWM1_OUT,
+
+	/* USB */
+	GPIO4_GPIO,	/* detect */
+	GPIO36_GPIO,	/* pullup */
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MATRIX KEYPAD */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
+	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
+	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
+	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
+	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
+	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
+	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
+	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
+	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
+	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
+	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
+	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
+	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
+	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
+	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
+
+	/* PXA GPIO KEYS */
+	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
+
+	/* MISC */
+	GPIO1_RST,	/* reset */
+	GPIO2_GPIO,	/* earphone detect */
+	GPIO16_GPIO,	/* backlight switch */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static struct pxamci_platform_data palmtc_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
+	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
+	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
+	.detect_delay		= 20,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtc_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
+};
+
+static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
+	.buttons	= palmtc_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
+};
+
+static struct platform_device palmtc_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtc_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtc_backlight_notify(int brightness)
+{
+	/* backlight is on when GPIO16 AF0 is high */
+	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
+	return brightness;
+}
+
+static void palmtc_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtc_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= PALMTC_MAX_INTENSITY,
+	.dft_brightness	= PALMTC_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTC_PERIOD_NS,
+	.init		= palmtc_backlight_init,
+	.notify		= palmtc_backlight_notify,
+	.exit		= palmtc_backlight_exit,
+};
+
+static struct platform_device palmtc_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa25x_device_pwm1.dev,
+		.platform_data	= &palmtc_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmtc_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMTC_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMTC_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmtc_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
+}
+
+static void palmtc_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTC_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtc_ficp_platform_data = {
+	.startup		= palmtc_irda_startup,
+	.shutdown		= palmtc_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtc_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * Keyboard
+ ******************************************************************************/
+static const uint32_t palmtc_matrix_keys[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(0, 1, KEY_X),
+	KEY(0, 2, KEY_POWER),
+	KEY(0, 3, KEY_TAB),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_LEFTSHIFT),
+	KEY(0, 7, KEY_Z),
+	KEY(0, 8, KEY_S),
+	KEY(0, 9, KEY_W),
+	KEY(0, 10, KEY_E),
+	KEY(0, 11, KEY_UP),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 3, KEY_D),
+	KEY(1, 4, KEY_C),
+	KEY(1, 5, KEY_F),
+	KEY(1, 6, KEY_R),
+	KEY(1, 7, KEY_SPACE),
+	KEY(1, 8, KEY_V),
+	KEY(1, 9, KEY_G),
+	KEY(1, 10, KEY_T),
+	KEY(1, 11, KEY_LEFT),
+
+	KEY(2, 0, KEY_F3),
+	KEY(2, 1, KEY_LEFTCTRL),
+	KEY(2, 3, KEY_H),
+	KEY(2, 4, KEY_Y),
+	KEY(2, 5, KEY_N),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_U),
+	KEY(2, 8, KEY_M),
+	KEY(2, 9, KEY_K),
+	KEY(2, 10, KEY_I),
+	KEY(2, 11, KEY_RIGHT),
+
+	KEY(3, 0, KEY_F4),
+	KEY(3, 1, KEY_ENTER),
+	KEY(3, 3, KEY_DOT),
+	KEY(3, 4, KEY_L),
+	KEY(3, 5, KEY_O),
+	KEY(3, 6, KEY_LEFTALT),
+	KEY(3, 7, KEY_ENTER),
+	KEY(3, 8, KEY_BACKSPACE),
+	KEY(3, 9, KEY_P),
+	KEY(3, 10, KEY_B),
+	KEY(3, 11, KEY_FN),
+};
+
+const struct matrix_keymap_data palmtc_keymap_data = {
+	.keymap			= palmtc_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
+};
+
+const static unsigned int palmtc_keypad_row_gpios[] = {
+	0, 9, 10, 11
+};
+
+const static unsigned int palmtc_keypad_col_gpios[] = {
+	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
+};
+
+static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
+	.keymap_data	= &palmtc_keymap_data,
+	.col_gpios	= palmtc_keypad_row_gpios,
+	.num_col_gpios	= 12,
+	.row_gpios	= palmtc_keypad_col_gpios,
+	.num_row_gpios	= 4,
+	.active_low	= 1,
+
+	.debounce_ms		= 20,
+	.col_scan_delay_us	= 5,
+};
+
+static struct platform_device palmtc_keyboard = {
+	.name	= "matrix-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_keypad_platform_data,
+	},
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
+};
+
+/******************************************************************************
+ * Touchscreen / Battery / GPIO-extender
+ ******************************************************************************/
+static struct platform_device palmtc_ucb1400_core = {
+	.name	= "ucb1400_core",
+	.id	= -1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct resource palmtc_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_16M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition palmtc_flash_parts[] = {
+	{
+		.name	= "U-Boot Bootloader",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "Linux Kernel",
+		.offset	= 0x40000,
+		.size	= 0x2c0000,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= 0x300000,
+		.size	= 0xcc0000,
+	},
+	{
+		.name	= "U-Boot Environment",
+		.offset	= 0xfc0000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data palmtc_flash_data = {
+	.width		= 4,
+	.parts		= palmtc_flash_parts,
+	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
+};
+
+static struct platform_device palmtc_flash = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &palmtc_flash_resource,
+	.num_resources	= 1,
+	.dev = {
+		.platform_data	= &palmtc_flash_data,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtc_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtc_lcd_screen = {
+	.modes			= palmtc_lcd_modes,
+	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmtc_backlight,
+	&palmtc_ucb1400_core,
+	&palmtc_keyboard,
+	&palmtc_pxa_keys,
+	&palmtc_flash,
+};
+
+static void __init palmtc_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+
+	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_mci_info(&palmtc_mci_platform_data);
+	pxa_set_udc_info(&palmtc_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtc_ficp_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+};
+
+MACHINE_START(PALMTC, "Palm Tungsten|C")
+	.phys_io	= 0x40000000,
+	.boot_params 	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtc_init
+MACHINE_END
-- 
cgit v1.2.3


From e2c509c7e63ffdeef21f292441c3d4ce73db9250 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <philipp.zabel@gmail.com>
Date: Fri, 7 Aug 2009 17:01:04 +0200
Subject: [ARM] pxa/hx4700: use platform_lcd driver

Instead of directly registering an lcd_device, use the platform_lcd driver.
This fixes a broken build in case CONFIG_LCD_CLASS_DEVICE is not enabled.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Ben Dooks <ben-linux-arm@fluff.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/hx4700.c | 56 ++++++++++++++++++----------------------------
 1 file changed, 22 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 81359d574f8..f2058721254 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,6 +45,7 @@
 #include <mach/irda.h>
 #include <mach/pxa2xx_spi.h>
 
+#include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
 #include "devices.h"
@@ -368,8 +369,6 @@ static struct platform_device egpio = {
  * LCD - Sony display connected to ATI Imageon w3220
  */
 
-static int lcd_power;
-
 static void sony_lcd_init(void)
 {
 	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
@@ -410,35 +409,6 @@ static void sony_lcd_off(void)
 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
 }
 
-static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
-{
-	switch (level) {
-	case FB_BLANK_UNBLANK:
-		sony_lcd_init();
-		break;
-	case FB_BLANK_NORMAL:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		sony_lcd_off();
-		break;
-	}
-	lcd_power = level;
-	return 0;
-}
-
-static int hx4700_lcd_get_power(struct lcd_device *lm)
-{
-	return lcd_power;
-}
-
-static struct lcd_ops hx4700_lcd_ops = {
-	.get_power = hx4700_lcd_get_power,
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct lcd_device *hx4700_lcd_device;
-
 #ifdef CONFIG_PM
 static void w3220_lcd_suspend(struct w100fb_par *wfb)
 {
@@ -573,6 +543,27 @@ static struct platform_device w3220 = {
 	.resource      = w3220_resources,
 };
 
+static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	if (power)
+		sony_lcd_init();
+	else
+		sony_lcd_off();
+}
+
+static struct plat_lcd_data hx4700_lcd_data = {
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct platform_device hx4700_lcd = {
+	.name = "platform-lcd",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &hx4700_lcd_data,
+		.parent        = &w3220.dev,
+	},
+};
+
 /*
  * Backlight
  */
@@ -872,9 +863,6 @@ static void __init hx4700_init(void)
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 
-	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
-					(void *)&w3220_info, &hx4700_lcd_ops);
-
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
-- 
cgit v1.2.3


From a90c4fb89a870dede5d69a7eb5cb320158e21aab Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Mon, 27 Jul 2009 16:58:50 +0800
Subject: [ARM] pxa/corgi: make use of GPIO based matrix keypad driver

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/corgi.c | 131 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 130 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 39a94585f97..0ff5ed80936 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -29,6 +29,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -104,6 +105,28 @@ static unsigned long corgi_pin_config[] __initdata = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 
+	/* GPIO Matrix Keypad */
+	GPIO66_GPIO,	/* column 0 */
+	GPIO67_GPIO,	/* column 1 */
+	GPIO68_GPIO,	/* column 2 */
+	GPIO69_GPIO,	/* column 3 */
+	GPIO70_GPIO,	/* column 4 */
+	GPIO71_GPIO,	/* column 5 */
+	GPIO72_GPIO,	/* column 6 */
+	GPIO73_GPIO,	/* column 7 */
+	GPIO74_GPIO,	/* column 8 */
+	GPIO75_GPIO,	/* column 9 */
+	GPIO76_GPIO,	/* column 10 */
+	GPIO77_GPIO,	/* column 11 */
+	GPIO58_GPIO,	/* row 0 */
+	GPIO59_GPIO,	/* row 1 */
+	GPIO60_GPIO,	/* row 2 */
+	GPIO61_GPIO,	/* row 3 */
+	GPIO62_GPIO,	/* row 4 */
+	GPIO63_GPIO,	/* row 5 */
+	GPIO64_GPIO,	/* row 6 */
+	GPIO65_GPIO,	/* row 7 */
+
 	/* GPIO */
 	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
 	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
@@ -267,9 +290,115 @@ static struct platform_device corgifb_device = {
 /*
  * Corgi Keyboard Device
  */
+#define CORGI_KEY_CALENDER	KEY_F1
+#define CORGI_KEY_ADDRESS	KEY_F2
+#define CORGI_KEY_FN		KEY_F3
+#define CORGI_KEY_CANCEL	KEY_F4
+#define CORGI_KEY_OFF		KEY_SUSPEND
+#define CORGI_KEY_EXOK		KEY_F5
+#define CORGI_KEY_EXCANCEL	KEY_F6
+#define CORGI_KEY_EXJOGDOWN	KEY_F7
+#define CORGI_KEY_EXJOGUP	KEY_F8
+#define CORGI_KEY_JAP1		KEY_LEFTCTRL
+#define CORGI_KEY_JAP2		KEY_LEFTALT
+#define CORGI_KEY_MAIL		KEY_F10
+#define CORGI_KEY_OK		KEY_F11
+#define CORGI_KEY_MENU		KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, CORGI_KEY_CALENDER),
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, CORGI_KEY_ADDRESS),
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 10, KEY_LEFTSHIFT),
+	KEY(5, 0, CORGI_KEY_MAIL),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, CORGI_KEY_FN),
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, CORGI_KEY_JAP1),
+	KEY(6, 2, CORGI_KEY_JAP2),
+	KEY(6, 3, CORGI_KEY_CANCEL),
+	KEY(6, 4, CORGI_KEY_OK),
+	KEY(6, 5, CORGI_KEY_MENU),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+	KEY(7, 0, CORGI_KEY_OFF),
+	KEY(7, 1, CORGI_KEY_EXOK),
+	KEY(7, 2, CORGI_KEY_EXCANCEL),
+	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+	KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+	.keymap		= corgikbd_keymap,
+	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+		{ 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+	.keymap_data		= &corgikbd_keymap_data,
+	.row_gpios		= corgikbd_row_gpios,
+	.col_gpios		= corgikbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device corgikbd_device = {
-	.name		= "corgi-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &corgikbd_pdata,
+	},
 };
 
 /*
-- 
cgit v1.2.3


From 93dd29a818a0fdb485a8f10bac58f5993e55d9c8 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Mon, 27 Jul 2009 16:59:39 +0800
Subject: [ARM] pxa/spitz: make use of GPIO based matrix keypad driver

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/spitz.c | 129 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 128 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index da85327e630..c4b8305b66a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -24,6 +24,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -111,6 +112,26 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
 	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
 
+	/* GPIO matrix keypad */
+	GPIO88_GPIO,	/* column 0 */
+	GPIO23_GPIO,	/* column 1 */
+	GPIO24_GPIO,	/* column 2 */
+	GPIO25_GPIO,	/* column 3 */
+	GPIO26_GPIO,	/* column 4 */
+	GPIO27_GPIO,	/* column 5 */
+	GPIO52_GPIO,	/* column 6 */
+	GPIO103_GPIO,	/* column 7 */
+	GPIO107_GPIO,	/* column 8 */
+	GPIO108_GPIO,	/* column 9 */
+	GPIO114_GPIO,	/* column 10 */
+	GPIO12_GPIO,	/* row 0 */
+	GPIO17_GPIO,	/* row 1 */
+	GPIO91_GPIO,	/* row 2 */
+	GPIO34_GPIO,	/* row 3 */
+	GPIO36_GPIO,	/* row 4 */
+	GPIO38_GPIO,	/* row 5 */
+	GPIO39_GPIO,	/* row 6 */
+
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
@@ -242,9 +263,115 @@ EXPORT_SYMBOL(spitzscoop2_device);
 /*
  * Spitz Keyboard Device
  */
+#define SPITZ_KEY_CALENDAR	KEY_F1
+#define SPITZ_KEY_ADDRESS	KEY_F2
+#define SPITZ_KEY_FN		KEY_F3
+#define SPITZ_KEY_CANCEL	KEY_F4
+#define SPITZ_KEY_EXOK		KEY_F5
+#define SPITZ_KEY_EXCANCEL	KEY_F6
+#define SPITZ_KEY_EXJOGDOWN	KEY_F7
+#define SPITZ_KEY_EXJOGUP	KEY_F8
+#define SPITZ_KEY_JAP1		KEY_LEFTALT
+#define SPITZ_KEY_JAP2		KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC		KEY_F9
+#define SPITZ_KEY_MAIL		KEY_F10
+#define SPITZ_KEY_OK		KEY_F11
+#define SPITZ_KEY_MENU		KEY_F12
+
+static const uint32_t spitzkbd_keymap[] = {
+	KEY(0, 0, KEY_LEFTCTRL),
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(0, 9, SPITZ_KEY_EXOK),	/* EXOK */
+	KEY(0, 10, SPITZ_KEY_EXCANCEL),	/* EXCANCEL */
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(1, 9, SPITZ_KEY_EXJOGDOWN),	/* EXJOGDOWN */
+	KEY(1, 10, SPITZ_KEY_EXJOGUP),	/* EXJOGUP */
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, SPITZ_KEY_ADDRESS),	/* ADDRESS */
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, SPITZ_KEY_CALENDAR),	/* CALENDAR */
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 9, KEY_LEFTSHIFT),
+	KEY(5, 0, SPITZ_KEY_MAIL),	/* MAIL */
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 10, SPITZ_KEY_FN),	/* FN */
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, SPITZ_KEY_JAP1),	/* JAP1 */
+	KEY(6, 2, SPITZ_KEY_JAP2),	/* JAP2 */
+	KEY(6, 3, SPITZ_KEY_CANCEL),	/* CANCEL */
+	KEY(6, 4, SPITZ_KEY_OK),	/* OK */
+	KEY(6, 5, SPITZ_KEY_MENU),	/* MENU */
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+};
+
+static const struct matrix_keymap_data spitzkbd_keymap_data = {
+	.keymap		= spitzkbd_keymap,
+	.keymap_size	= ARRAY_SIZE(spitzkbd_keymap),
+};
+
+static const uint32_t spitzkbd_row_gpios[] =
+		{ 12, 17, 91, 34, 36, 38, 39 };
+static const uint32_t spitzkbd_col_gpios[] =
+		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
+
+static struct matrix_keypad_platform_data spitzkbd_pdata = {
+	.keymap_data		= &spitzkbd_keymap_data,
+	.row_gpios		= spitzkbd_row_gpios,
+	.col_gpios		= spitzkbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(spitzkbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(spitzkbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device spitzkbd_device = {
-	.name		= "spitz-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &spitzkbd_pdata,
+	},
 };
 
 
-- 
cgit v1.2.3


From 7dafdf3d22a59499a1d4dddeb626c0bc76ef455d Mon Sep 17 00:00:00 2001
From: "walker@suse.cz" <walker@suse.cz>
Date: Mon, 31 Aug 2009 19:25:57 +0200
Subject: [ARM] pxa/treo680: pxamci simplify to use GPIO
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/treo680.c | 84 +++------------------------------------------
 1 file changed, 4 insertions(+), 80 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 753ec4df17b..5d3ec080770 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -153,87 +153,11 @@ static unsigned long treo680_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int treo680_mci_init(struct device *dev,
-		irq_handler_t treo680_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
-
-	if (err)
-		goto err;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
-	if (err)
-		goto err2;
-
-	err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
-			treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-
-	if (err) {
-		dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
-			     __func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
-	if (err)
-		goto err5;
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void treo680_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-}
-
-static void treo680_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int treo680_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
-}
-
 static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= treo680_mci_power,
-	.get_ro		= treo680_mci_get_ro,
-	.init 		= treo680_mci_init,
-	.exit		= treo680_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO680_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
+	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
 };
 
 /******************************************************************************
-- 
cgit v1.2.3


From 28d7a94680b16673af27779b289b4be2abd2e248 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Tom=C3=A1=C5=A1=20=C4=8Cech?= <sleep_walker@suse.cz>
Date: Thu, 3 Sep 2009 16:55:47 +0200
Subject: [ARM] pxa/treo680: move LCD power GPIO to proper place
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/treo680.c | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 5d3ec080770..9a2df64c659 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -254,16 +254,9 @@ static int treo680_backlight_init(struct device *dev)
 	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
 	if (ret)
 		goto err2;
-	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
-	if (ret)
-		goto err3;
 
 	return 0;
-err3:
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
+
 err2:
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
 err:
@@ -279,7 +272,6 @@ static int treo680_backlight_notify(int brightness)
 static void treo680_backlight_exit(struct device *dev)
 {
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
 }
 
 static struct platform_pwm_backlight_data treo680_backlight_data = {
@@ -470,6 +462,11 @@ static struct pxafb_mode_info treo680_lcd_modes[] = {
 },
 };
 
+static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+}
+
 static struct pxafb_mach_info treo680_lcd_screen = {
 	.modes		= treo680_lcd_modes,
 	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
@@ -509,11 +506,32 @@ static void __init treo680_udc_init(void)
 	}
 }
 
+static void __init treo680_lcd_power_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+	if (ret) {
+		pr_err("Treo680: LCD power GPIO request failed!\n");
+		return;
+	}
+
+	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+	if (ret) {
+		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+		gpio_free(GPIO_NR_TREO680_LCD_POWER);
+		return;
+	}
+
+	treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+}
+
 static void __init treo680_init(void)
 {
 	treo680_pm_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
 	pxa_set_keypad_info(&treo680_keypad_platform_data);
+	treo680_lcd_power_init();
 	set_pxa_fb_info(&treo680_lcd_screen);
 	pxa_set_mci_info(&treo680_mci_platform_data);
 	treo680_udc_init();
-- 
cgit v1.2.3


From 51238bfefb92d15d07c15aec8c6a8fcc7b228e8c Mon Sep 17 00:00:00 2001
From: Matej Kenda <matejken@gmail.com>
Date: Mon, 7 Sep 2009 14:08:34 +0800
Subject: [ARM] pxa: add support for the IskraTel XCEP board
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Added support for the Iskratel XCEP single board computer, embedded in
instruments used in particle accelerators.

The patch contains the platform specific code, Makefile and Kconfig
changes for platform arm-pxa.

Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si>
Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig  |  15 ++++
 arch/arm/mach-pxa/Makefile |   2 +
 arch/arm/mach-pxa/xcep.c   | 187 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 204 insertions(+)
 create mode 100644 arch/arm/mach-pxa/xcep.c

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index d1dcb1cf075..b3cdfe55c03 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -504,6 +504,21 @@ config MACH_EZX_E2
 	default y
 	depends on PXA_EZX
 
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select PXA25x
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index aa8f83e9421..c9890a124cf 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -79,6 +79,8 @@ obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
+
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
new file mode 100644
index 00000000000..3fd79cbb36c
--- /dev/null
+++ b/arch/arm/mach-pxa/xcep.c
@@ -0,0 +1,187 @@
+/*  linux/arch/arm/mach-pxa/xcep.c
+ *
+ *  Support for the Iskratel Electronics XCEP platform as used in
+ *  the Libera instruments from Instrumentation Technologies.
+ *
+ *  Author:     Ales Bardorfer <ales@i-tech.si>
+ *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
+ *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
+ *  Created:    June 2006
+ *  Copyright:  (C) 2006-2009 Instrumentation Technologies
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#include "generic.h"
+
+#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
+#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
+#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
+#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
+#define XCEP_ETH_IRQ		IRQ_GPIO0
+
+/*  XCEP CPLD base */
+#define XCEP_CPLD_BASE		0xf0000000
+
+
+/* Flash partitions. */
+
+static struct mtd_partition xcep_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Bootloader ENV",
+		.size =		0x00040000,
+		.offset =	0x00040000,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00080000,
+	}, {
+		.name =		"Rescue fs",
+		.size =		0x00280000,
+		.offset =	0x00180000,
+	}, {
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00400000
+	}
+};
+
+static struct physmap_flash_data xcep_flash_data[] = {
+	{
+		.width		= 4,		/* bankwidth in bytes */
+		.parts		= xcep_partitions,
+		.nr_parts	= ARRAY_SIZE(xcep_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = xcep_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/* SMC LAN91C111 network controller. */
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= XCEP_ETH_PHYS,
+		.end	= XCEP_ETH_PHYS_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= XCEP_ETH_IRQ,
+		.end	= XCEP_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= "smc91x-attrib",
+		.start	= XCEP_ETH_ATTR,
+		.end	= XCEP_ETH_ATTR_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata xcep_smc91x_info = {
+	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &xcep_smc91x_info,
+	},
+};
+
+
+static struct platform_device *devices[] __initdata = {
+	&flash_device,
+	&smc91x_device,
+};
+
+
+/* We have to state that there are HWMON devices on the I2C bus on XCEP.
+ * Drivers for HWMON verify capabilities of the adapter when loading and
+ * refuse to attach if the adapter doesn't support HWMON class of devices.
+ * See also Documentation/i2c/porting-clients. */
+static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
+	.class = I2C_CLASS_HWMON
+};
+
+
+static mfp_cfg_t xcep_pin_config[] __initdata = {
+	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
+	GPIO80_nCS_4,	/* CPLD chip select. */
+	/* SSP communication to MSP430 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO27_SSP1_EXTCLK
+};
+
+static void __init xcep_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+
+	/* See Intel XScale Developer's Guide for details */
+	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
+	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
+	MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+	pxa_set_i2c_info(&xcep_i2c_platform_data);
+}
+
+MACHINE_START(XCEP, "Iskratel XCEP")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= xcep_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
-- 
cgit v1.2.3


From 23440f85ff2ffce96155736b50238aa0b94a358f Mon Sep 17 00:00:00 2001
From: Matej Kenda <matejken@gmail.com>
Date: Mon, 7 Sep 2009 14:14:29 +0800
Subject: [ARM] pxa: add defconfig for IskraTel XCEP board

Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/configs/xcep_defconfig | 1129 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 1129 insertions(+)
 create mode 100644 arch/arm/configs/xcep_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
new file mode 100644
index 00000000000..33bb7250946
--- /dev/null
+++ b/arch/arm/configs/xcep_defconfig
@@ -0,0 +1,1129 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 09:02:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=".xcep-itech"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_MACH_XCEP=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 2a23ec3679d84ac243add761fa3d3872cf6dcb11 Mon Sep 17 00:00:00 2001
From: Jonathan McDowell <noodles@earth.li>
Date: Sat, 4 Jul 2009 14:43:56 +0100
Subject: [ARM] pxa: balloon3 (http://balloonboard.org/) base machine support

So, again against latest pxa-linux-2.6/devel, with the following
changes:

 * Move to __raw_readl/__raw_writel for FPGA/CPLD register access
 * Change Toppoly LCD config to be selectable at run time rather than
   compile time.
 * Remove currently unused irq device suspend/resume functions.
 * Strip out unnecessary/duplicated #includes.
 * Some code style cleanups.

Balloon3 (http://balloonboard.org/) base machine support

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/Kconfig                   |   6 +
 arch/arm/mach-pxa/Makefile                  |   1 +
 arch/arm/mach-pxa/balloon3.c                | 361 ++++++++++++++++++++++++++++
 arch/arm/mach-pxa/include/mach/balloon3.h   | 134 +++++++++++
 arch/arm/mach-pxa/include/mach/irqs.h       |  10 +
 arch/arm/mach-pxa/include/mach/uncompress.h |   2 +-
 6 files changed, 513 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-pxa/balloon3.c
 create mode 100644 arch/arm/mach-pxa/include/mach/balloon3.h

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index b3cdfe55c03..a6f8eab14ba 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -84,6 +84,12 @@ config MACH_MP900C
 	bool "Nec Mobilepro 900/c"
 	select PXA25x
 
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
 	select PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c9890a124cf..f10e152bfc2 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
new file mode 100644
index 00000000000..f23138b8fca
--- /dev/null
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -0,0 +1,361 @@
+/*
+ *  linux/arch/arm/mach-pxa/balloon3.c
+ *
+ *  Support for Balloonboard.org Balloon3 board.
+ *
+ *  Author:	Nick Bane, Wookey, Jonathan McDowell
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from mainstone.c, by Nico Pitre
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+		(1 << BALLOON3_FEATURE_AUDIO) |
+		(1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+	if (!arg)
+		return 0;
+
+	return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+static void balloon3_mask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled &= ~(1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled |= (1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+	.name		= "FPGA",
+	.ack		= balloon3_mask_irq,
+	.mask		= balloon3_mask_irq,
+	.unmask		= balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+					balloon3_irq_enabled;
+
+	do {
+		/* clear useless edge notification */
+		if (desc->chip->ack)
+			desc->chip->ack(BALLOON3_AUX_NIRQ);
+		while (pending) {
+			irq = BALLOON3_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+			pending &= pending - 1;
+		}
+		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+				balloon3_irq_enabled;
+	} while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+	/* setup extra Balloon3 irqs */
+	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+		set_irq_chip(irq, &balloon3_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+	set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+	pr_debug("%s: chained handler installed - irq %d automatically "
+		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+static void balloon3_backlight_power(int on)
+{
+	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static unsigned long balloon3_lcd_pin_config[] = {
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	GPIO99_GPIO,		/* Backlight */
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_pxafb_info = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_backlight_power	= balloon3_backlight_power,
+};
+
+static unsigned long balloon3_mmc_pin_config[] = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
+static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		pr_debug("%s: on\n", __func__);
+		/* FIXME something to prod here? */
+	} else {
+		pr_debug("%s: off\n", __func__);
+		/* FIXME something to prod here? */
+	}
+}
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 	= balloon3_mci_setpower,
+};
+
+static int balloon3_udc_is_connected(void)
+{
+	pr_debug("%s: udc connected\n", __func__);
+	return 1;
+}
+
+static void balloon3_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
+		pr_debug("%s: connect\n", __func__);
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~UP2OCR_DPPUE;
+		pr_debug("%s: disconnect\n", __func__);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info = {
+	.udc_is_connected = balloon3_udc_is_connected,
+	.udc_command      = balloon3_udc_command,
+};
+
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+};
+
+static unsigned long balloon3_ohci_pin_config[] = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Wakeup GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* NAND & IDLE LED GPIOs */
+	GPIO9_GPIO,
+	GPIO10_GPIO,
+};
+
+static struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	},
+	{
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_leds_platform_data,
+	},
+};
+
+static void __init balloon3_init(void)
+{
+	pr_info("Initialising Balloon3\n");
+
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	pxa_set_i2c_info(NULL);
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+		pxa_set_ac97_info(NULL);
+
+	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
+			"LCD Backlight Power");
+		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+		set_pxa_fb_info(&balloon3_pxafb_info);
+	}
+
+	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+		pxa_set_mci_info(&balloon3_mci_platform_data);
+	}
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
+		pxa_set_ohci_info(&balloon3_ohci_platform_data);
+	}
+	pxa_set_udc_info(&balloon3_udc_info);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+	platform_device_register(&balloon3led_device);
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+	{	/* CPLD/FPGA */
+		.virtual	=  BALLOON3_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
+		.length		= BALLOON3_FPGA_LENGTH,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init balloon3_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+	/* Maintainer: Nick Bane. */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= balloon3_map_io,
+	.init_irq	= balloon3_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= balloon3_init,
+	.boot_params	= PHYS_OFFSET + 0x100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
new file mode 100644
index 00000000000..bfec09b1814
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -0,0 +1,134 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/balloon3.h
+ *
+ *  Authors:	Nick Bane and Wookey
+ *  Created:	Oct, 2005
+ *  Copyright:	Toby Churchill Ltd
+ *  Cribbed from mainstone.c, by Nicholas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_BALLOON3_H
+#define ASM_ARCH_BALLOON3_H
+
+enum balloon3_features {
+	BALLOON3_FEATURE_OHCI,
+	BALLOON3_FEATURE_MMC,
+	BALLOON3_FEATURE_CF,
+	BALLOON3_FEATURE_AUDIO,
+	BALLOON3_FEATURE_TOPPOLY,
+};
+
+#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
+#define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
+#define BALLOON3_FPGA_LENGTH	0x01000000
+
+/* FPGA/CPLD registers */
+#define BALLOON3_PCMCIA0_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+/* fixme - same for now */
+#define BALLOON3_PCMCIA1_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_NANDIO_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+/* fpga/cpld interrupt control register */
+#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
+#define BALLOON3_NANDIO_CTL2_REG 	(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NANDIO_CTL_REG 	(BALLOON3_FPGA_VIRT + 0x00e00014)
+#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
+
+#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
+#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
+#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
+
+/* GPIOs for irqs */
+#define BALLOON3_GPIO_AUX_NIRQ		(94)
+#define BALLOON3_GPIO_CODEC_IRQ		(95)
+
+/* Timer and Idle LED locations */
+#define BALLOON3_GPIO_LED_NAND		(9)
+#define BALLOON3_GPIO_LED_IDLE		(10)
+
+/* backlight control */
+#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
+
+#define BALLOON3_GPIO_S0_CD		(105)
+
+/* FPGA Interrupt Mask/Acknowledge Register */
+#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
+#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
+
+/* CF Status Register */
+#define BALLOON3_PCMCIA_nIRQ		(1 << 0)  /* IRQ / ready signal */
+#define BALLOON3_PCMCIA_nSTSCHG_BVD1	(1 << 1)
+					/* VDD sense / card status changed */
+
+/* CF control register (write) */
+#define BALLOON3_PCMCIA_RESET		(1 << 0)   /* Card reset signal */
+#define BALLOON3_PCMCIA_ENABLE		(1 << 1)
+#define BALLOON3_PCMCIA_ADD_ENABLE	(1 << 2)
+
+/* CPLD (and FPGA) interface definitions */
+#define CPLD_LCD0_DATA_SET             0x00
+#define CPLD_LCD0_DATA_CLR             0x10
+#define CPLD_LCD0_COMMAND_SET          0x01
+#define CPLD_LCD0_COMMAND_CLR          0x11
+#define CPLD_LCD1_DATA_SET             0x02
+#define CPLD_LCD1_DATA_CLR             0x12
+#define CPLD_LCD1_COMMAND_SET          0x03
+#define CPLD_LCD1_COMMAND_CLR          0x13
+
+#define CPLD_MISC_SET                  0x07
+#define CPLD_MISC_CLR                  0x17
+#define CPLD_MISC_LOON_NRESET_BIT      0
+#define CPLD_MISC_LOON_UNSUSP_BIT      1
+#define CPLD_MISC_RUN_5V_BIT           2
+#define CPLD_MISC_CHG_D0_BIT           3
+#define CPLD_MISC_CHG_D1_BIT           4
+#define CPLD_MISC_DAC_NCS_BIT          5
+
+#define CPLD_LCD_SET                   0x08
+#define CPLD_LCD_CLR                   0x18
+#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
+#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
+#define CPLD_LCD_LED_RED_BIT           4
+#define CPLD_LCD_LED_GREEN_BIT         5
+#define CPLD_LCD_NRESET_BIT            7
+
+#define CPLD_LCD_RO_SET                0x09
+#define CPLD_LCD_RO_CLR                0x19
+#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
+#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
+
+#define CPLD_SERIAL_SET                0x0a
+#define CPLD_SERIAL_CLR                0x1a
+#define CPLD_SERIAL_GSM_RI_BIT         0
+#define CPLD_SERIAL_GSM_CTS_BIT        1
+#define CPLD_SERIAL_GSM_DTR_BIT        2
+#define CPLD_SERIAL_LPR_CTS_BIT        3
+#define CPLD_SERIAL_TC232_CTS_BIT      4
+#define CPLD_SERIAL_TC232_DSR_BIT      5
+
+#define CPLD_SROUTING_SET              0x0b
+#define CPLD_SROUTING_CLR              0x1b
+#define CPLD_SROUTING_MSP430_LPR       0
+#define CPLD_SROUTING_MSP430_TC232     1
+#define CPLD_SROUTING_MSP430_GSM       2
+#define CPLD_SROUTING_LOON_LPR         (0 << 4)
+#define CPLD_SROUTING_LOON_TC232       (1 << 4)
+#define CPLD_SROUTING_LOON_GSM         (2 << 4)
+
+#define CPLD_AROUTING_SET              0x0c
+#define CPLD_AROUTING_CLR              0x1c
+#define CPLD_AROUTING_MIC2PHONE_BIT    0
+#define CPLD_AROUTING_PHONE2INT_BIT    1
+#define CPLD_AROUTING_PHONE2EXT_BIT    2
+#define CPLD_AROUTING_LOONL2INT_BIT    3
+#define CPLD_AROUTING_LOONL2EXT_BIT    4
+#define CPLD_AROUTING_LOONR2PHONE_BIT  5
+#define CPLD_AROUTING_LOONR2INT_BIT    6
+#define CPLD_AROUTING_LOONR2EXT_BIT    7
+
+extern int balloon3_has(enum balloon3_features feature);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 567204c3959..3677a9af9c8 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -263,6 +263,16 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
 #define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
 #define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index b54749413e9..237734b5b1b 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -37,7 +37,7 @@ static inline void arch_decomp_setup(void)
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300())
+	    || machine_is_cm_x300() || machine_is_balloon3())
 		UART = STUART;
 }
 
-- 
cgit v1.2.3


From c4bd01727380ce666aba987b3d7c0e838cb99bbe Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Fri, 17 Jul 2009 12:50:43 +0200
Subject: [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c

and convert PXA-based devices to gpio_pwdown where possible.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/corgi.c             | 27 +-------------------
 arch/arm/mach-pxa/e740.c              |  1 -
 arch/arm/mach-pxa/e750.c              |  1 -
 arch/arm/mach-pxa/eseries.c           | 39 ++---------------------------
 arch/arm/mach-pxa/hx4700.c            |  9 ++-----
 arch/arm/mach-pxa/include/mach/irda.h |  2 ++
 arch/arm/mach-pxa/lubbock.c           |  5 ++--
 arch/arm/mach-pxa/magician.c          | 10 ++------
 arch/arm/mach-pxa/mainstone.c         |  5 ++--
 arch/arm/mach-pxa/palmld.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmt5.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmtc.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmte2.c           | 30 ++---------------------
 arch/arm/mach-pxa/palmtx.c            | 30 ++---------------------
 arch/arm/mach-pxa/palmz72.c           | 28 +--------------------
 arch/arm/mach-pxa/poodle.c            | 27 +-------------------
 arch/arm/mach-pxa/pxa2xx.c            |  1 +
 arch/arm/mach-pxa/spitz.c             | 46 +++--------------------------------
 arch/arm/mach-pxa/tosa.c              |  9 ++++---
 arch/arm/mach-pxa/treo680.c           | 39 ++---------------------------
 arch/arm/mach-pxa/trizeps4.c          |  1 +
 21 files changed, 40 insertions(+), 360 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 0ff5ed80936..b536b5a5a10 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -447,34 +447,9 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
 /*
  * Irda
  */
-static void corgi_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int corgi_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void corgi_irda_shutdown(struct device *dev)
-{
-	gpio_free(CORGI_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
+	.gpio_pwdown		= CORGI_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= corgi_irda_transceiver_mode,
-	.startup		= corgi_irda_startup,
-	.shutdown		= corgi_irda_shutdown,
 };
 
 
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index a36fc17f671..49acdfa6650 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -199,7 +199,6 @@ static void __init e740_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 1d00110590e..4052ece3ef4 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -200,7 +200,6 @@ static void __init e750_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c60dadf847a..91417f03506 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -47,44 +47,9 @@ struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
 	.gpio_pullup_inverted = 1
 };
 
-static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(GPIO_E7XX_IR_OFF, 1);
-		pxa2xx_transceiver_mode(dev, mode);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(GPIO_E7XX_IR_OFF, 0);
-	}
-}
-
-int e7xx_irda_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
-	if (ret)
-		goto out;
-
-	ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
-	if (ret)
-		goto out;
-
-	e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
-out:
-	return ret;
-}
-
-static void e7xx_irda_shutdown(struct device *dev)
-{
-	e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(GPIO_E7XX_IR_OFF);
-}
-
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = e7xx_irda_transceiver_mode,
-	.shutdown = e7xx_irda_shutdown,
+	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 int eseries_tmio_enable(struct platform_device *dev)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index f2058721254..abff9e13274 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -175,14 +175,9 @@ static int hx4700_gpio_request(struct gpio_ress *gpios, int size)
  * IRDA
  */
 
-static void irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
-}
-
 static struct pxaficp_platform_data ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = irda_transceiver_mode,
+	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
index 0a50c3c763d..3cd41f77dda 100644
--- a/arch/arm/mach-pxa/include/mach/irda.h
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -12,6 +12,8 @@ struct pxaficp_platform_data {
 	void (*transceiver_mode)(struct device *dev, int mode);
 	int (*startup)(struct device *dev);
 	void (*shutdown)(struct device *dev);
+	int gpio_pwdown;		/* powerdown GPIO for the IrDA chip */
+	bool gpio_pwdown_inverted;	/* gpio_pwdown is inverted */
 };
 
 extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1785cc9494d..c6a94d3fdd6 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -507,8 +507,9 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode = lubbock_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
+	.transceiver_mode	= lubbock_irda_transceiver_mode,
 };
 
 static void __init lubbock_init(void)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 0daba43d7ca..5360c07f513 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -140,15 +140,9 @@ static unsigned long magician_pin_config[] __initdata = {
  * IRDA
  */
 
-static void magician_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data magician_ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = magician_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f7dc23078ce..a4eeae345e6 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -479,8 +479,9 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode = mainstone_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= mainstone_irda_transceiver_mode,
 };
 
 static struct gpio_keys_button gpio_keys_button[] = {
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index b3ae8b958ad..1ad029dd443 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -304,35 +304,9 @@ static struct platform_device palmld_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmld_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmld_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-}
-
-static void palmld_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmld_ficp_platform_data = {
-	.startup		= palmld_irda_startup,
-	.shutdown		= palmld_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmld_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMLD_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 88dcaac358a..2dd7ce28556 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -243,35 +243,9 @@ static struct platform_device palmt5_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmt5_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmt5_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-}
-
-static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmt5_ficp_platform_data = {
-	.startup		= palmt5_irda_startup,
-	.shutdown		= palmt5_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmt5_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMT5_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index f70f1f820ee..bb2cc0dd44e 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -218,35 +218,9 @@ static struct platform_device palmtc_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmtc_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTC_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTC_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmtc_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTC_IR_DISABLE);
-}
-
-static void palmtc_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTC_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmtc_ficp_platform_data = {
-	.startup		= palmtc_irda_startup,
-	.shutdown		= palmtc_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmtc_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index d9ef76c9278..277c4062e3c 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -215,35 +215,9 @@ static struct platform_device palmte2_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmte2_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmte2_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-}
-
-static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.startup		= palmte2_irda_startup,
-	.shutdown		= palmte2_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmte2_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index c0aca18b71b..76a2b37eaf3 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -303,35 +303,9 @@ static struct platform_device palmtx_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmtx_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmtx_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-}
-
-static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
-	.startup		= palmtx_irda_startup,
-	.shutdown		= palmtx_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmtx_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTX_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index d8fa53c1917..c2bf493c5f5 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -230,35 +230,9 @@ static struct platform_device palmz72_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmz72_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmz72_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-}
-
-static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmz72_ficp_platform_data = {
-	.startup		= palmz72_irda_startup,
-	.shutdown		= palmz72_irda_shutdown,
+	.gpio_pwdown		= GPIO_NR_PALMZ72_IR_DISABLE,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= palmz72_irda_transceiver_mode,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 333b1dc2dd3..a186994f77f 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -302,34 +302,9 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
 /*
  * Irda
  */
-static void poodle_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int poodle_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(POODLE_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void poodle_irda_shutdown(struct device *dev)
-{
-	gpio_free(POODLE_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
+	.gpio_pwdown		= POODLE_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= poodle_irda_transceiver_mode,
-	.startup		= poodle_irda_startup,
-	.shutdown		= poodle_irda_shutdown,
 };
 
 
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2f3394f8591..868270421b8 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -52,3 +52,4 @@ void pxa2xx_transceiver_mode(struct device *dev, int mode)
 	} else
 		BUG();
 }
+EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c4b8305b66a..f9dc59c054b 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -560,50 +560,10 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 /*
  * Irda
  */
-static int spitz_irda_startup(struct device *dev)
-{
-	int rc;
-
-	rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
-	if (rc)
-		goto err;
-
-	rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
-	if (rc)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(SPITZ_GPIO_IR_ON);
-err:
-	return rc;
-}
-
-static void spitz_irda_shutdown(struct device *dev)
-{
-	gpio_free(SPITZ_GPIO_IR_ON);
-}
-
-static void spitz_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-#ifdef CONFIG_MACH_AKITA
-static void akita_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-#endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
+/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= spitz_irda_transceiver_mode,
-	.startup		= spitz_irda_startup,
-	.shutdown		= spitz_irda_shutdown,
 };
 
 
@@ -782,6 +742,8 @@ static void __init common_init(void)
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
+	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+
 	platform_scoop_config = &spitz_pcmcia_config;
 
 	common_init();
@@ -824,7 +786,7 @@ static struct nand_ecclayout akita_oobinfo = {
 
 static void __init akita_init(void)
 {
-	spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
 
 	sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
 	sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index b56cc5667bb..e81a52673d4 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -337,10 +337,11 @@ static void tosa_irda_shutdown(struct device *dev)
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = tosa_irda_transceiver_mode,
-	.startup = tosa_irda_startup,
-	.shutdown = tosa_irda_shutdown,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= tosa_irda_transceiver_mode,
+	.startup		= tosa_irda_startup,
+	.shutdown		= tosa_irda_shutdown,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 9a2df64c659..fe085076fbf 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -295,44 +295,9 @@ static struct platform_device treo680_backlight = {
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static void treo680_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int treo680_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
-	if (err)
-		goto err1;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
-	if (err)
-		goto err2;
-
-	return 0;
-
-err2:
-	dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-err1:
-	dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
-	return err;
-}
-
-static void treo680_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-}
-
 static struct pxaficp_platform_data treo680_ficp_info = {
-	.transceiver_cap  = IR_FIRMODE | IR_SIRMODE | IR_OFF,
-	.startup          = treo680_irda_startup,
-	.shutdown         = treo680_irda_shutdown,
-	.transceiver_mode = treo680_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_TREO680_IR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 32299869b35..3981e0356d1 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -415,6 +415,7 @@ static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 }
 
 static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.gpio_pwdown		= -1,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= trizeps4_irda_transceiver_mode,
 	.startup		= trizeps4_irda_startup,
-- 
cgit v1.2.3


From 76c36d016a3f958d6231dcdef54a132614c3b578 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 05:55:17 -0700
Subject: sparc64: Provide extern decls for sparc_??u_type strings.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/system_64.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
index 6c077816ab2..25e848f0cad 100644
--- a/arch/sparc/include/asm/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
@@ -29,6 +29,10 @@ enum sparc_cpu {
 /* This cannot ever be a sun4c :) That's just history. */
 #define ARCH_SUN4C 0
 
+extern const char *sparc_cpu_type;
+extern const char *sparc_fpu_type;
+extern const char *sparc_pmu_type;
+
 extern char reboot_command[];
 
 /* These are here in an effort to more fully work around Spitfire Errata
-- 
cgit v1.2.3


From 2d0740c4562493b60f59ca9b0330a2d5e01d43ec Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 05:56:16 -0700
Subject: sparc64: Use nmi_enter() and nmi_exit(), as needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/nmi.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 47a465fe3c3..7de19dd30f4 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -84,6 +84,7 @@ static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
 	if (do_panic || panic_on_oops)
 		panic("Non maskable interrupt");
 
+	nmi_exit();
 	local_irq_enable();
 	do_exit(SIGBUS);
 }
@@ -98,6 +99,8 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 
 	local_cpu_data().__nmi_count++;
 
+	nmi_enter();
+
 	if (notify_die(DIE_NMI, "nmi", regs, 0,
 		       pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
 		touched = 1;
@@ -120,6 +123,8 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 		write_pic(picl_value(nmi_hz));
 		pcr_ops->write(pcr_enable);
 	}
+
+	nmi_exit();
 }
 
 static inline unsigned int get_nmi_count(int cpu)
-- 
cgit v1.2.3


From 5686f9c3d67d5a20108fa26105c98b042df13123 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 05:59:24 -0700
Subject: sparc64: Implement a real set_perf_counter_pending().

When the perf counter subsystem needs to reschedule work out
from an NMI, it invokes set_perf_counter_pending().

This triggers a non-NMI irq which should invoke
perf_counter_do_pending().

Currently this won't trigger because sparc64 won't trigger
the perf counter subsystem from NMIs, but when the HW counter
support is added it will.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/perf_counter.h |  2 +-
 arch/sparc/kernel/pcr.c               | 14 +++++++++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
index f07c587a830..38d64454643 100644
--- a/arch/sparc/include/asm/perf_counter.h
+++ b/arch/sparc/include/asm/perf_counter.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SPARC_PERF_COUNTER_H
 #define __ASM_SPARC_PERF_COUNTER_H
 
-static inline void set_perf_counter_pending(void) { }
+extern void set_perf_counter_pending(void);
 
 #define	PERF_COUNTER_INDEX_OFFSET	0
 
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index 1ae8cdd7e70..68ff0010707 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -7,6 +7,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 
+#include <linux/perf_counter.h>
+
 #include <asm/pil.h>
 #include <asm/pcr.h>
 #include <asm/nmi.h>
@@ -34,10 +36,20 @@ unsigned int picl_shift;
  */
 void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
 {
+	struct pt_regs *old_regs;
+
 	clear_softint(1 << PIL_DEFERRED_PCR_WORK);
+
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+#ifdef CONFIG_PERF_COUNTERS
+	perf_counter_do_pending();
+#endif
+	irq_exit();
+	set_irq_regs(old_regs);
 }
 
-void schedule_deferred_pcr_work(void)
+void set_perf_counter_pending(void)
 {
 	set_softint(1 << PIL_DEFERRED_PCR_WORK);
 }
-- 
cgit v1.2.3


From 59abbd1e7cfd6018fb8e58a96aa562aaff8711e7 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 06:28:20 -0700
Subject: sparc64: Initial hw perf counter support.

Only supports one simple counter and only UltraSPARC-IIIi chips.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/nmi.h          |   3 +
 arch/sparc/include/asm/perf_counter.h |   6 +
 arch/sparc/kernel/Makefile            |   3 +
 arch/sparc/kernel/nmi.c               |   8 +-
 arch/sparc/kernel/perf_counter.c      | 520 ++++++++++++++++++++++++++++++++++
 5 files changed, 538 insertions(+), 2 deletions(-)
 create mode 100644 arch/sparc/kernel/perf_counter.c

(limited to 'arch')

diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index c7d11e435df..72e6500e7ab 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -7,4 +7,7 @@ extern void nmi_adjust_hz(unsigned int new_hz);
 
 extern atomic_t nmi_active;
 
+extern void start_nmi_watchdog(void *unused);
+extern void stop_nmi_watchdog(void *unused);
+
 #endif /* __NMI_H */
diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
index 38d64454643..5d7a8ca0e49 100644
--- a/arch/sparc/include/asm/perf_counter.h
+++ b/arch/sparc/include/asm/perf_counter.h
@@ -5,4 +5,10 @@ extern void set_perf_counter_pending(void);
 
 #define	PERF_COUNTER_INDEX_OFFSET	0
 
+#ifdef CONFIG_PERF_COUNTERS
+extern void init_hw_perf_counters(void);
+#else
+static inline void init_hw_perf_counters(void)	{ }
+#endif
+
 #endif
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index b0041756c9f..f96dc5761f7 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -103,3 +103,6 @@ obj-$(CONFIG_SUN_LDOMS) += ldc.o vio.o viohs.o ds.o
 obj-$(CONFIG_AUDIT)     += audit.o
 audit--$(CONFIG_AUDIT)  := compat_audit.o
 obj-$(CONFIG_COMPAT)    += $(audit--y)
+
+pc--$(CONFIG_PERF_COUNTERS) := perf_counter.o
+obj-$(CONFIG_SPARC64)	+= $(pc--y)
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 7de19dd30f4..391a6ed9a18 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/smp.h>
 
+#include <asm/perf_counter.h>
 #include <asm/ptrace.h>
 #include <asm/local.h>
 #include <asm/pcr.h>
@@ -156,7 +157,7 @@ static void report_broken_nmi(int cpu, int *prev_nmi_count)
 	atomic_dec(&nmi_active);
 }
 
-static void stop_nmi_watchdog(void *unused)
+void stop_nmi_watchdog(void *unused)
 {
 	pcr_ops->write(PCR_PIC_PRIV);
 	__get_cpu_var(wd_enabled) = 0;
@@ -210,7 +211,7 @@ error:
 	return err;
 }
 
-static void start_nmi_watchdog(void *unused)
+void start_nmi_watchdog(void *unused)
 {
 	__get_cpu_var(wd_enabled) = 1;
 	atomic_inc(&nmi_active);
@@ -263,6 +264,9 @@ int __init nmi_init(void)
 			atomic_set(&nmi_active, -1);
 		}
 	}
+	if (!err)
+		init_hw_perf_counters();
+
 	return err;
 }
 
diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
new file mode 100644
index 00000000000..f2c781450d0
--- /dev/null
+++ b/arch/sparc/kernel/perf_counter.c
@@ -0,0 +1,520 @@
+/* Performance counter support for sparc64.
+ *
+ * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ *
+ * This code is based almost entirely upon the x86 perf counter
+ * code, which is:
+ *
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ */
+
+#include <linux/perf_counter.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+
+#include <asm/cpudata.h>
+#include <asm/atomic.h>
+#include <asm/nmi.h>
+#include <asm/pcr.h>
+
+/* Sparc64 chips have two performance counters, 32-bits each, with
+ * overflow interrupts generated on transition from 0xffffffff to 0.
+ * The counters are accessed in one go using a 64-bit register.
+ *
+ * Both counters are controlled using a single control register.  The
+ * only way to stop all sampling is to clear all of the context (user,
+ * supervisor, hypervisor) sampling enable bits.  But these bits apply
+ * to both counters, thus the two counters can't be enabled/disabled
+ * individually.
+ *
+ * The control register has two event fields, one for each of the two
+ * counters.  It's thus nearly impossible to have one counter going
+ * while keeping the other one stopped.  Therefore it is possible to
+ * get overflow interrupts for counters not currently "in use" and
+ * that condition must be checked in the overflow interrupt handler.
+ *
+ * So we use a hack, in that we program inactive counters with the
+ * "sw_count0" and "sw_count1" events.  These count how many times
+ * the instruction "sethi %hi(0xfc000), %g0" is executed.  It's an
+ * unusual way to encode a NOP and therefore will not trigger in
+ * normal code.
+ */
+
+#define MAX_HWCOUNTERS			2
+#define MAX_PERIOD			((1UL << 32) - 1)
+
+#define PIC_UPPER_INDEX			0
+#define PIC_LOWER_INDEX			1
+
+#define PIC_UPPER_NOP			0x1c
+#define PIC_LOWER_NOP			0x14
+
+struct cpu_hw_counters {
+	struct perf_counter	*counters[MAX_HWCOUNTERS];
+	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
+	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
+	int enabled;
+};
+DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = { .enabled = 1, };
+
+struct perf_event_map {
+	u16	encoding;
+	u8	pic_mask;
+#define PIC_NONE	0x00
+#define PIC_UPPER	0x01
+#define PIC_LOWER	0x02
+};
+
+struct sparc_pmu {
+	const struct perf_event_map	*(*event_map)(int);
+	int				max_events;
+	int				upper_shift;
+	int				lower_shift;
+	int				event_mask;
+};
+
+static const struct perf_event_map ultra3i_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
+};
+
+static const struct perf_event_map *ultra3i_event_map(int event)
+{
+	return &ultra3i_perfmon_event_map[event];
+}
+
+static const struct sparc_pmu ultra3i_pmu = {
+	.event_map	= ultra3i_event_map,
+	.max_events	= ARRAY_SIZE(ultra3i_perfmon_event_map),
+	.upper_shift	= 11,
+	.lower_shift	= 4,
+	.event_mask	= 0x3f,
+};
+
+static const struct sparc_pmu *sparc_pmu __read_mostly;
+
+static u64 event_encoding(u64 event, int idx)
+{
+	if (idx == PIC_UPPER_INDEX)
+		event <<= sparc_pmu->upper_shift;
+	else
+		event <<= sparc_pmu->lower_shift;
+	return event;
+}
+
+static u64 mask_for_index(int idx)
+{
+	return event_encoding(sparc_pmu->event_mask, idx);
+}
+
+static u64 nop_for_index(int idx)
+{
+	return event_encoding(idx == PIC_UPPER_INDEX ?
+			      PIC_UPPER_NOP : PIC_LOWER_NOP, idx);
+}
+
+static inline void sparc_pmu_enable_counter(struct hw_perf_counter *hwc,
+					    int idx)
+{
+	u64 val, mask = mask_for_index(idx);
+
+	val = pcr_ops->read();
+	pcr_ops->write((val & ~mask) | hwc->config);
+}
+
+static inline void sparc_pmu_disable_counter(struct hw_perf_counter *hwc,
+					     int idx)
+{
+	u64 mask = mask_for_index(idx);
+	u64 nop = nop_for_index(idx);
+	u64 val = pcr_ops->read();
+
+	pcr_ops->write((val & ~mask) | nop);
+}
+
+void hw_perf_enable(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val;
+	int i;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	val = pcr_ops->read();
+
+	for (i = 0; i < MAX_HWCOUNTERS; i++) {
+		struct perf_counter *cp = cpuc->counters[i];
+		struct hw_perf_counter *hwc;
+
+		if (!cp)
+			continue;
+		hwc = &cp->hw;
+		val |= hwc->config_base;
+	}
+
+	pcr_ops->write(val);
+}
+
+void hw_perf_disable(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+
+	val = pcr_ops->read();
+	val &= ~(PCR_UTRACE | PCR_STRACE);
+	pcr_ops->write(val);
+}
+
+static u32 read_pmc(int idx)
+{
+	u64 val;
+
+	read_pic(val);
+	if (idx == PIC_UPPER_INDEX)
+		val >>= 32;
+
+	return val & 0xffffffff;
+}
+
+static void write_pmc(int idx, u64 val)
+{
+	u64 shift, mask, pic;
+
+	shift = 0;
+	if (idx == PIC_UPPER_INDEX)
+		shift = 32;
+
+	mask = ((u64) 0xffffffff) << shift;
+	val <<= shift;
+
+	read_pic(pic);
+	pic &= ~mask;
+	pic |= val;
+	write_pic(pic);
+}
+
+static int sparc_perf_counter_set_period(struct perf_counter *counter,
+					 struct hw_perf_counter *hwc, int idx)
+{
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+	if (left > MAX_PERIOD)
+		left = MAX_PERIOD;
+
+	atomic64_set(&hwc->prev_count, (u64)-left);
+
+	write_pmc(idx, (u64)(-left) & 0xffffffff);
+
+	perf_counter_update_userpage(counter);
+
+	return ret;
+}
+
+static int sparc_pmu_enable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	struct hw_perf_counter *hwc = &counter->hw;
+	int idx = hwc->idx;
+
+	if (test_and_set_bit(idx, cpuc->used_mask))
+		return -EAGAIN;
+
+	sparc_pmu_disable_counter(hwc, idx);
+
+	cpuc->counters[idx] = counter;
+	set_bit(idx, cpuc->active_mask);
+
+	sparc_perf_counter_set_period(counter, hwc, idx);
+	sparc_pmu_enable_counter(hwc, idx);
+	perf_counter_update_userpage(counter);
+	return 0;
+}
+
+static u64 sparc_perf_counter_update(struct perf_counter *counter,
+				     struct hw_perf_counter *hwc, int idx)
+{
+	int shift = 64 - 32;
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = read_pmc(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &counter->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static void sparc_pmu_disable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	struct hw_perf_counter *hwc = &counter->hw;
+	int idx = hwc->idx;
+
+	clear_bit(idx, cpuc->active_mask);
+	sparc_pmu_disable_counter(hwc, idx);
+
+	barrier();
+
+	sparc_perf_counter_update(counter, hwc, idx);
+	cpuc->counters[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_counter_update_userpage(counter);
+}
+
+static void sparc_pmu_read(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	sparc_perf_counter_update(counter, hwc, hwc->idx);
+}
+
+static void sparc_pmu_unthrottle(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	sparc_pmu_enable_counter(hwc, hwc->idx);
+}
+
+static atomic_t active_counters = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmc_grab_mutex);
+
+void perf_counter_grab_pmc(void)
+{
+	if (atomic_inc_not_zero(&active_counters))
+		return;
+
+	mutex_lock(&pmc_grab_mutex);
+	if (atomic_read(&active_counters) == 0) {
+		if (atomic_read(&nmi_active) > 0) {
+			on_each_cpu(stop_nmi_watchdog, NULL, 1);
+			BUG_ON(atomic_read(&nmi_active) != 0);
+		}
+		atomic_inc(&active_counters);
+	}
+	mutex_unlock(&pmc_grab_mutex);
+}
+
+void perf_counter_release_pmc(void)
+{
+	if (atomic_dec_and_mutex_lock(&active_counters, &pmc_grab_mutex)) {
+		if (atomic_read(&nmi_active) == 0)
+			on_each_cpu(start_nmi_watchdog, NULL, 1);
+		mutex_unlock(&pmc_grab_mutex);
+	}
+}
+
+static void hw_perf_counter_destroy(struct perf_counter *counter)
+{
+	perf_counter_release_pmc();
+}
+
+static int __hw_perf_counter_init(struct perf_counter *counter)
+{
+	struct perf_counter_attr *attr = &counter->attr;
+	struct hw_perf_counter *hwc = &counter->hw;
+	const struct perf_event_map *pmap;
+	u64 enc;
+
+	if (atomic_read(&nmi_active) < 0)
+		return -ENODEV;
+
+	if (attr->type != PERF_TYPE_HARDWARE)
+		return -EOPNOTSUPP;
+
+	if (attr->config >= sparc_pmu->max_events)
+		return -EINVAL;
+
+	perf_counter_grab_pmc();
+	counter->destroy = hw_perf_counter_destroy;
+
+	/* We save the enable bits in the config_base.  So to
+	 * turn off sampling just write 'config', and to enable
+	 * things write 'config | config_base'.
+	 */
+	hwc->config_base = 0;
+	if (!attr->exclude_user)
+		hwc->config_base |= PCR_UTRACE;
+	if (!attr->exclude_kernel)
+		hwc->config_base |= PCR_STRACE;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = MAX_PERIOD;
+		hwc->last_period = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	pmap = sparc_pmu->event_map(attr->config);
+
+	enc = pmap->encoding;
+	if (pmap->pic_mask & PIC_UPPER) {
+		hwc->idx = PIC_UPPER_INDEX;
+		enc <<= sparc_pmu->upper_shift;
+	} else {
+		hwc->idx = PIC_LOWER_INDEX;
+		enc <<= sparc_pmu->lower_shift;
+	}
+
+	hwc->config |= enc;
+	return 0;
+}
+
+static const struct pmu pmu = {
+	.enable		= sparc_pmu_enable,
+	.disable	= sparc_pmu_disable,
+	.read		= sparc_pmu_read,
+	.unthrottle	= sparc_pmu_unthrottle,
+};
+
+const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
+{
+	int err = __hw_perf_counter_init(counter);
+
+	if (err)
+		return ERR_PTR(err);
+	return &pmu;
+}
+
+void perf_counter_print_debug(void)
+{
+	unsigned long flags;
+	u64 pcr, pic;
+	int cpu;
+
+	if (!sparc_pmu)
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+
+	pcr = pcr_ops->read();
+	read_pic(pic);
+
+	pr_info("\n");
+	pr_info("CPU#%d: PCR[%016llx] PIC[%016llx]\n",
+		cpu, pcr, pic);
+
+	local_irq_restore(flags);
+}
+
+static int __kprobes perf_counter_nmi_handler(struct notifier_block *self,
+					      unsigned long cmd, void *__args)
+{
+	struct die_args *args = __args;
+	struct perf_sample_data data;
+	struct cpu_hw_counters *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	if (!atomic_read(&active_counters))
+		return NOTIFY_DONE;
+
+	switch (cmd) {
+	case DIE_NMI:
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	regs = args->regs;
+
+	data.regs = regs;
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_counters);
+	for (idx = 0; idx < MAX_HWCOUNTERS; idx++) {
+		struct perf_counter *counter = cpuc->counters[idx];
+		struct hw_perf_counter *hwc;
+		u64 val;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		hwc = &counter->hw;
+		val = sparc_perf_counter_update(counter, hwc, idx);
+		if (val & (1ULL << 31))
+			continue;
+
+		data.period = counter->hw.last_period;
+		if (!sparc_perf_counter_set_period(counter, hwc, idx))
+			continue;
+
+		if (perf_counter_overflow(counter, 1, &data))
+			sparc_pmu_disable_counter(hwc, idx);
+	}
+
+	return NOTIFY_STOP;
+}
+
+static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
+	.notifier_call		= perf_counter_nmi_handler,
+};
+
+static bool __init supported_pmu(void)
+{
+	if (!strcmp(sparc_pmu_type, "ultra3i")) {
+		sparc_pmu = &ultra3i_pmu;
+		return true;
+	}
+	return false;
+}
+
+void __init init_hw_perf_counters(void)
+{
+	pr_info("Performance counters: ");
+
+	if (!supported_pmu()) {
+		pr_cont("No support for PMU type '%s'\n", sparc_pmu_type);
+		return;
+	}
+
+	pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
+
+	/* All sparc64 PMUs currently have 2 counters.  But this simple
+	 * driver only supports one active counter at a time.
+	 */
+	perf_max_counters = 1;
+
+	register_die_notifier(&perf_counter_nmi_notifier);
+}
-- 
cgit v1.2.3


From 91b9286d819b821fd742c0053fe0748818374198 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:09:06 -0700
Subject: sparc64: Provide hypervisor tracing bit support for perf counters.

A PMU need only specify which bit in the PCR enabled hypervisor
tracing in order to enable this.

This will be used in Niagara-2 perf counter support.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index f2c781450d0..d86009fa6f8 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -77,6 +77,7 @@ struct sparc_pmu {
 	int				upper_shift;
 	int				lower_shift;
 	int				event_mask;
+	int				hv_bit;
 };
 
 static const struct perf_event_map ultra3i_perfmon_event_map[] = {
@@ -178,7 +179,7 @@ void hw_perf_disable(void)
 	cpuc->enabled = 0;
 
 	val = pcr_ops->read();
-	val &= ~(PCR_UTRACE | PCR_STRACE);
+	val &= ~(PCR_UTRACE | PCR_STRACE | sparc_pmu->hv_bit);
 	pcr_ops->write(val);
 }
 
@@ -377,6 +378,8 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 		hwc->config_base |= PCR_UTRACE;
 	if (!attr->exclude_kernel)
 		hwc->config_base |= PCR_STRACE;
+	if (!attr->exclude_hv)
+		hwc->config_base |= sparc_pmu->hv_bit;
 
 	if (!hwc->sample_period) {
 		hwc->sample_period = MAX_PERIOD;
-- 
cgit v1.2.3


From 496c07e3b43475124d7f2d77fafbc1f5055abfee Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:10:59 -0700
Subject: sparc64: Provide a way to specify a perf counter overflow IRQ enable
 bit.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index d86009fa6f8..0cd5487b341 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -78,6 +78,7 @@ struct sparc_pmu {
 	int				lower_shift;
 	int				event_mask;
 	int				hv_bit;
+	int				irq_bit;
 };
 
 static const struct perf_event_map ultra3i_perfmon_event_map[] = {
@@ -179,7 +180,8 @@ void hw_perf_disable(void)
 	cpuc->enabled = 0;
 
 	val = pcr_ops->read();
-	val &= ~(PCR_UTRACE | PCR_STRACE | sparc_pmu->hv_bit);
+	val &= ~(PCR_UTRACE | PCR_STRACE |
+		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
 	pcr_ops->write(val);
 }
 
@@ -373,7 +375,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	 * turn off sampling just write 'config', and to enable
 	 * things write 'config | config_base'.
 	 */
-	hwc->config_base = 0;
+	hwc->config_base = sparc_pmu->irq_bit;
 	if (!attr->exclude_user)
 		hwc->config_base |= PCR_UTRACE;
 	if (!attr->exclude_kernel)
-- 
cgit v1.2.3


From 660d13765f342ecb6e774fcbc35b64beb0a069da Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:13:26 -0700
Subject: sparc64: Perf counter 'nop' event is not constant.

On Niagara-2, for example, it's going to be different.  So make
it something specified in sparc_pmu.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index 0cd5487b341..f3b8ccca3c9 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -52,9 +52,6 @@
 #define PIC_UPPER_INDEX			0
 #define PIC_LOWER_INDEX			1
 
-#define PIC_UPPER_NOP			0x1c
-#define PIC_LOWER_NOP			0x14
-
 struct cpu_hw_counters {
 	struct perf_counter	*counters[MAX_HWCOUNTERS];
 	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
@@ -79,6 +76,8 @@ struct sparc_pmu {
 	int				event_mask;
 	int				hv_bit;
 	int				irq_bit;
+	int				upper_nop;
+	int				lower_nop;
 };
 
 static const struct perf_event_map ultra3i_perfmon_event_map[] = {
@@ -99,6 +98,8 @@ static const struct sparc_pmu ultra3i_pmu = {
 	.upper_shift	= 11,
 	.lower_shift	= 4,
 	.event_mask	= 0x3f,
+	.upper_nop	= 0x1c,
+	.lower_nop	= 0x14,
 };
 
 static const struct sparc_pmu *sparc_pmu __read_mostly;
@@ -120,7 +121,8 @@ static u64 mask_for_index(int idx)
 static u64 nop_for_index(int idx)
 {
 	return event_encoding(idx == PIC_UPPER_INDEX ?
-			      PIC_UPPER_NOP : PIC_LOWER_NOP, idx);
+			      sparc_pmu->upper_nop :
+			      sparc_pmu->lower_nop, idx);
 }
 
 static inline void sparc_pmu_enable_counter(struct hw_perf_counter *hwc,
-- 
cgit v1.2.3


From b73d884756303316ead4cd7dad51236b2a515a1a Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:22:18 -0700
Subject: sparc64: Initial niagara2 perf counter support.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index f3b8ccca3c9..09de4035eaa 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -102,6 +102,32 @@ static const struct sparc_pmu ultra3i_pmu = {
 	.lower_nop	= 0x14,
 };
 
+static const struct perf_event_map niagara2_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0208, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0302, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x0201, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x0202, PIC_UPPER | PIC_LOWER },
+};
+
+static const struct perf_event_map *niagara2_event_map(int event)
+{
+	return &niagara2_perfmon_event_map[event];
+}
+
+static const struct sparc_pmu niagara2_pmu = {
+	.event_map	= niagara2_event_map,
+	.max_events	= ARRAY_SIZE(niagara2_perfmon_event_map),
+	.upper_shift	= 19,
+	.lower_shift	= 6,
+	.event_mask	= 0xfff,
+	.hv_bit		= 0x8,
+	.irq_bit	= 0x03,
+	.upper_nop	= 0x220,
+	.lower_nop	= 0x220,
+};
+
 static const struct sparc_pmu *sparc_pmu __read_mostly;
 
 static u64 event_encoding(u64 event, int idx)
@@ -504,6 +530,10 @@ static bool __init supported_pmu(void)
 		sparc_pmu = &ultra3i_pmu;
 		return true;
 	}
+	if (!strcmp(sparc_pmu_type, "niagara2")) {
+		sparc_pmu = &niagara2_pmu;
+		return true;
+	}
 	return false;
 }
 
-- 
cgit v1.2.3


From 6ba661787594868512a71c129062ebd57d0c01e7 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 25 Aug 2009 01:13:10 -0300
Subject: KVM guest: do not batch pte updates from interrupt context

Commit b8bcfe997e4 made paravirt pte updates synchronous in interrupt
context.

Unfortunately the KVM pv mmu code caches the lazy/nonlazy mode
internally, so a pte update from interrupt context during a lazy mmu
operation can be batched while it should be performed synchronously.

https://bugzilla.redhat.com/show_bug.cgi?id=518022

Drop the internal mode variable and use paravirt_get_lazy_mode(), which
returns the correct state.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kernel/kvm.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index c664d515f61..63b0ec8d3d4 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -34,7 +34,6 @@
 struct kvm_para_state {
 	u8 mmu_queue[MMU_QUEUE_SIZE];
 	int mmu_queue_len;
-	enum paravirt_lazy_mode mode;
 };
 
 static DEFINE_PER_CPU(struct kvm_para_state, para_state);
@@ -77,7 +76,7 @@ static void kvm_deferred_mmu_op(void *buffer, int len)
 {
 	struct kvm_para_state *state = kvm_para_state();
 
-	if (state->mode != PARAVIRT_LAZY_MMU) {
+	if (paravirt_get_lazy_mode() != PARAVIRT_LAZY_MMU) {
 		kvm_mmu_op(buffer, len);
 		return;
 	}
@@ -185,10 +184,7 @@ static void kvm_release_pt(unsigned long pfn)
 
 static void kvm_enter_lazy_mmu(void)
 {
-	struct kvm_para_state *state = kvm_para_state();
-
 	paravirt_enter_lazy_mmu();
-	state->mode = paravirt_get_lazy_mode();
 }
 
 static void kvm_leave_lazy_mmu(void)
@@ -197,7 +193,6 @@ static void kvm_leave_lazy_mmu(void)
 
 	mmu_queue_flush(state);
 	paravirt_leave_lazy_mmu();
-	state->mode = paravirt_get_lazy_mode();
 }
 
 static void __init paravirt_ops_setup(void)
-- 
cgit v1.2.3


From 3d53c27d05950390712f92c5ad1604c60190ed64 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 1 Sep 2009 12:34:07 +0300
Subject: KVM: Use thread debug register storage instead of kvm specific data

Instead of saving the debug registers from the processor to a kvm data
structure, rely in the debug registers stored in the thread structure.
This allows us not to save dr6 and dr7.

Reduces lightweight vmexit cost by 350 cycles, or 11 percent.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  3 ---
 arch/x86/kvm/x86.c              | 22 +++++++---------------
 2 files changed, 7 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 33901be75a3..e8f166a02c7 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -362,9 +362,6 @@ struct kvm_vcpu_arch {
 	u32 pat;
 
 	int switch_db_regs;
-	unsigned long host_db[KVM_NR_DB_REGS];
-	unsigned long host_dr6;
-	unsigned long host_dr7;
 	unsigned long db[KVM_NR_DB_REGS];
 	unsigned long dr6;
 	unsigned long dr7;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 35e7fc54de3..3e893c4fdd3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3623,14 +3623,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	kvm_guest_enter();
 
-	get_debugreg(vcpu->arch.host_dr6, 6);
-	get_debugreg(vcpu->arch.host_dr7, 7);
 	if (unlikely(vcpu->arch.switch_db_regs)) {
-		get_debugreg(vcpu->arch.host_db[0], 0);
-		get_debugreg(vcpu->arch.host_db[1], 1);
-		get_debugreg(vcpu->arch.host_db[2], 2);
-		get_debugreg(vcpu->arch.host_db[3], 3);
-
 		set_debugreg(0, 7);
 		set_debugreg(vcpu->arch.eff_db[0], 0);
 		set_debugreg(vcpu->arch.eff_db[1], 1);
@@ -3641,15 +3634,14 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	trace_kvm_entry(vcpu->vcpu_id);
 	kvm_x86_ops->run(vcpu, kvm_run);
 
-	if (unlikely(vcpu->arch.switch_db_regs)) {
-		set_debugreg(0, 7);
-		set_debugreg(vcpu->arch.host_db[0], 0);
-		set_debugreg(vcpu->arch.host_db[1], 1);
-		set_debugreg(vcpu->arch.host_db[2], 2);
-		set_debugreg(vcpu->arch.host_db[3], 3);
+	if (unlikely(vcpu->arch.switch_db_regs || test_thread_flag(TIF_DEBUG))) {
+		set_debugreg(current->thread.debugreg0, 0);
+		set_debugreg(current->thread.debugreg1, 1);
+		set_debugreg(current->thread.debugreg2, 2);
+		set_debugreg(current->thread.debugreg3, 3);
+		set_debugreg(current->thread.debugreg6, 6);
+		set_debugreg(current->thread.debugreg7, 7);
 	}
-	set_debugreg(vcpu->arch.host_dr6, 6);
-	set_debugreg(vcpu->arch.host_dr7, 7);
 
 	set_bit(KVM_REQ_KICK, &vcpu->requests);
 	local_irq_enable();
-- 
cgit v1.2.3


From e8a48342e9bc1c65ffe4bb3b3ac964e726dbd4c0 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 1 Sep 2009 16:06:25 +0300
Subject: KVM: VMX: Conditionally reload debug register 6

Only reload debug register 6 if we're running with the guest's
debug registers.  Saves around 150 cycles from the guest lightweight
exit path.

dr6 contains a couple of bits that are updated on #DB, so intercept
that unconditionally and update those bits then.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/vmx.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index eec04129402..f482100eff8 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -540,10 +540,12 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR);
 	if (!vcpu->fpu_active)
 		eb |= 1u << NM_VECTOR;
+	/*
+	 * Unconditionally intercept #DB so we can maintain dr6 without
+	 * reading it every exit.
+	 */
+	eb |= 1u << DB_VECTOR;
 	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
-		if (vcpu->guest_debug &
-		    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
-			eb |= 1u << DB_VECTOR;
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
 			eb |= 1u << BP_VECTOR;
 	}
@@ -3632,7 +3634,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	 */
 	vmcs_writel(HOST_CR0, read_cr0());
 
-	set_debugreg(vcpu->arch.dr6, 6);
+	if (vcpu->arch.switch_db_regs)
+		set_debugreg(vcpu->arch.dr6, 6);
 
 	asm(
 		/* Store host registers */
@@ -3734,7 +3737,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 				  | (1 << VCPU_EXREG_PDPTR));
 	vcpu->arch.regs_dirty = 0;
 
-	get_debugreg(vcpu->arch.dr6, 6);
+	if (vcpu->arch.switch_db_regs)
+		get_debugreg(vcpu->arch.dr6, 6);
 
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 	if (vmx->rmode.irq.pending)
-- 
cgit v1.2.3


From 542423b0dd162a9dbf91109461703bd0e545c71f Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 27 Aug 2009 15:07:30 +0300
Subject: KVM: VMX: call vmx_load_host_state() only if msr is cached

No need to call it before each kvm_(set|get)_msr_common()

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f482100eff8..cc6e00a9f72 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1007,9 +1007,9 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 		data = vmcs_readl(GUEST_SYSENTER_ESP);
 		break;
 	default:
-		vmx_load_host_state(to_vmx(vcpu));
 		msr = find_msr_entry(to_vmx(vcpu), msr_index);
 		if (msr) {
+			vmx_load_host_state(to_vmx(vcpu));
 			data = msr->data;
 			break;
 		}
@@ -1066,9 +1066,9 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 		}
 		/* Otherwise falls through to kvm_set_msr_common */
 	default:
-		vmx_load_host_state(vmx);
 		msr = find_msr_entry(vmx, msr_index);
 		if (msr) {
+			vmx_load_host_state(vmx);
 			msr->data = data;
 			break;
 		}
-- 
cgit v1.2.3


From e3904e6ed0d525e383eb961ed1da0596a10e5387 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 8 Sep 2009 14:50:51 -0300
Subject: KVM: x86: drop duplicate kvm_flush_remote_tlb calls

kvm_mmu_slot_remove_write_access already calls it.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3e893c4fdd3..7627ff607a9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2152,7 +2152,6 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		spin_lock(&kvm->mmu_lock);
 		kvm_mmu_slot_remove_write_access(kvm, log->slot);
 		spin_unlock(&kvm->mmu_lock);
-		kvm_flush_remote_tlbs(kvm);
 		memslot = &kvm->memslots[log->slot];
 		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
 		memset(memslot->dirty_bitmap, 0, n);
@@ -4896,7 +4895,6 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 
 	kvm_mmu_slot_remove_write_access(kvm, mem->slot);
 	spin_unlock(&kvm->mmu_lock);
-	kvm_flush_remote_tlbs(kvm);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 4da748960a6bd7b1e123e01bfa8f2dbcb6be209e Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 27 Aug 2009 16:25:04 +0300
Subject: KVM: fix misreporting of coalesced interrupts by kvm tracer

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/lapic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 5b9d1ae09ca..1ae5ceba7eb 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -376,7 +376,7 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 
 		result = !apic_test_and_set_irr(vector, apic);
 		trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
-					  trig_mode, vector, result);
+					  trig_mode, vector, !result);
 		if (!result) {
 			if (trig_mode)
 				apic_debug("level trig mode repeatedly for "
-- 
cgit v1.2.3


From 0a79b009525b160081d75cef5dbf45817956acf2 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 1 Sep 2009 12:03:25 +0300
Subject: KVM: VMX: Check cpl before emulating debug register access

Debug registers may only be accessed from cpl 0.  Unfortunately, vmx will
code to emulate the instruction even though it was issued from guest
userspace, possibly leading to an unexpected trap later.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/vmx.c              |  2 ++
 arch/x86/kvm/x86.c              | 13 +++++++++++++
 3 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index e8f166a02c7..3be000435fa 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -620,6 +620,7 @@ void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
 			   u32 error_code);
+bool kvm_require_cpl(struct kvm_vcpu *vcpu, int required_cpl);
 
 int kvm_pic_set_irq(void *opaque, int irq, int level);
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index cc6e00a9f72..f3812014bd0 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2934,6 +2934,8 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	unsigned long val;
 	int dr, reg;
 
+	if (!kvm_require_cpl(vcpu, 0))
+		return 1;
 	dr = vmcs_readl(GUEST_DR7);
 	if (dr & DR7_GD) {
 		/*
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7627ff607a9..4137cc579ba 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -222,6 +222,19 @@ void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 }
 EXPORT_SYMBOL_GPL(kvm_queue_exception_e);
 
+/*
+ * Checks if cpl <= required_cpl; if true, return true.  Otherwise queue
+ * a #GP and return false.
+ */
+bool kvm_require_cpl(struct kvm_vcpu *vcpu, int required_cpl)
+{
+	if (kvm_x86_ops->get_cpl(vcpu) <= required_cpl)
+		return true;
+	kvm_queue_exception_e(vcpu, GP_VECTOR, 0);
+	return false;
+}
+EXPORT_SYMBOL_GPL(kvm_require_cpl);
+
 /*
  * Load the pae pdptrs.  Return true is they are all valid.
  */
-- 
cgit v1.2.3


From 78c86e5e5691fc84d5fbea0cd4ac7147e87b7490 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 10 Sep 2009 10:09:38 -0700
Subject: x86: split __phys_addr out into separate file

Split __phys_addr out into its own file so we can disable
-fstack-protector in a fine-grained fashion.  Also it doesn't
have terribly much to do with the rest of ioremap.c.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/Makefile   |  4 +--
 arch/x86/mm/ioremap.c  | 72 +-------------------------------------------------
 arch/x86/mm/physaddr.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/mm/physaddr.h | 10 +++++++
 4 files changed, 83 insertions(+), 73 deletions(-)
 create mode 100644 arch/x86/mm/physaddr.c
 create mode 100644 arch/x86/mm/physaddr.h

(limited to 'arch')

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 72bb3a26c73..9b5a9f59a47 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,9 +1,9 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o gup.o
+	    pat.o pgtable.o physaddr.o gup.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_ioremap.o		:= $(nostackp)
+CFLAGS_physaddr.o		:= $(nostackp)
 
 obj-$(CONFIG_SMP)		+= tlb.o
 
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 8a450930834..04e1ad60c63 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -22,77 +22,7 @@
 #include <asm/pgalloc.h>
 #include <asm/pat.h>
 
-static inline int phys_addr_valid(resource_size_t addr)
-{
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-	return !(addr >> boot_cpu_data.x86_phys_bits);
-#else
-	return 1;
-#endif
-}
-
-#ifdef CONFIG_X86_64
-
-unsigned long __phys_addr(unsigned long x)
-{
-	if (x >= __START_KERNEL_map) {
-		x -= __START_KERNEL_map;
-		VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
-		x += phys_base;
-	} else {
-		VIRTUAL_BUG_ON(x < PAGE_OFFSET);
-		x -= PAGE_OFFSET;
-		VIRTUAL_BUG_ON(!phys_addr_valid(x));
-	}
-	return x;
-}
-EXPORT_SYMBOL(__phys_addr);
-
-bool __virt_addr_valid(unsigned long x)
-{
-	if (x >= __START_KERNEL_map) {
-		x -= __START_KERNEL_map;
-		if (x >= KERNEL_IMAGE_SIZE)
-			return false;
-		x += phys_base;
-	} else {
-		if (x < PAGE_OFFSET)
-			return false;
-		x -= PAGE_OFFSET;
-		if (!phys_addr_valid(x))
-			return false;
-	}
-
-	return pfn_valid(x >> PAGE_SHIFT);
-}
-EXPORT_SYMBOL(__virt_addr_valid);
-
-#else
-
-#ifdef CONFIG_DEBUG_VIRTUAL
-unsigned long __phys_addr(unsigned long x)
-{
-	/* VMALLOC_* aren't constants  */
-	VIRTUAL_BUG_ON(x < PAGE_OFFSET);
-	VIRTUAL_BUG_ON(__vmalloc_start_set && is_vmalloc_addr((void *) x));
-	return x - PAGE_OFFSET;
-}
-EXPORT_SYMBOL(__phys_addr);
-#endif
-
-bool __virt_addr_valid(unsigned long x)
-{
-	if (x < PAGE_OFFSET)
-		return false;
-	if (__vmalloc_start_set && is_vmalloc_addr((void *) x))
-		return false;
-	if (x >= FIXADDR_START)
-		return false;
-	return pfn_valid((x - PAGE_OFFSET) >> PAGE_SHIFT);
-}
-EXPORT_SYMBOL(__virt_addr_valid);
-
-#endif
+#include "physaddr.h"
 
 int page_is_ram(unsigned long pagenr)
 {
diff --git a/arch/x86/mm/physaddr.c b/arch/x86/mm/physaddr.c
new file mode 100644
index 00000000000..d2e2735327b
--- /dev/null
+++ b/arch/x86/mm/physaddr.c
@@ -0,0 +1,70 @@
+#include <linux/mmdebug.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+
+#include "physaddr.h"
+
+#ifdef CONFIG_X86_64
+
+unsigned long __phys_addr(unsigned long x)
+{
+	if (x >= __START_KERNEL_map) {
+		x -= __START_KERNEL_map;
+		VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
+		x += phys_base;
+	} else {
+		VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+		x -= PAGE_OFFSET;
+		VIRTUAL_BUG_ON(!phys_addr_valid(x));
+	}
+	return x;
+}
+EXPORT_SYMBOL(__phys_addr);
+
+bool __virt_addr_valid(unsigned long x)
+{
+	if (x >= __START_KERNEL_map) {
+		x -= __START_KERNEL_map;
+		if (x >= KERNEL_IMAGE_SIZE)
+			return false;
+		x += phys_base;
+	} else {
+		if (x < PAGE_OFFSET)
+			return false;
+		x -= PAGE_OFFSET;
+		if (!phys_addr_valid(x))
+			return false;
+	}
+
+	return pfn_valid(x >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(__virt_addr_valid);
+
+#else
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+unsigned long __phys_addr(unsigned long x)
+{
+	/* VMALLOC_* aren't constants  */
+	VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+	VIRTUAL_BUG_ON(__vmalloc_start_set && is_vmalloc_addr((void *) x));
+	return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+#endif
+
+bool __virt_addr_valid(unsigned long x)
+{
+	if (x < PAGE_OFFSET)
+		return false;
+	if (__vmalloc_start_set && is_vmalloc_addr((void *) x))
+		return false;
+	if (x >= FIXADDR_START)
+		return false;
+	return pfn_valid((x - PAGE_OFFSET) >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(__virt_addr_valid);
+
+#endif	/* CONFIG_X86_64 */
diff --git a/arch/x86/mm/physaddr.h b/arch/x86/mm/physaddr.h
new file mode 100644
index 00000000000..a3cd5a0c97b
--- /dev/null
+++ b/arch/x86/mm/physaddr.h
@@ -0,0 +1,10 @@
+#include <asm/processor.h>
+
+static inline int phys_addr_valid(resource_size_t addr)
+{
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+	return !(addr >> boot_cpu_data.x86_phys_bits);
+#else
+	return 1;
+#endif
+}
-- 
cgit v1.2.3


From fc06b8520b3bf9aaeb2e27debe6719c215bd4916 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Thu, 10 Sep 2009 17:22:44 -0400
Subject: x86/tracing: comment need for atomic nop

The dynamic function tracer relys on the macro P6_NOP5 always being
an atomic NOP. If for some reason it is changed to be two operations
(like a nop2 nop3) it can faults within the kernel when the function
tracer modifies the code.

This patch adds a comment to note that the P6_NOPs are expected to
be atomic. This will hopefully prevent anyone from changing that.

Reported-by: Mathieu Desnoyer <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/include/asm/nops.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/nops.h b/arch/x86/include/asm/nops.h
index ad2668ee1aa..6d8723a766c 100644
--- a/arch/x86/include/asm/nops.h
+++ b/arch/x86/include/asm/nops.h
@@ -65,6 +65,8 @@
    6: osp nopl 0x00(%eax,%eax,1)
    7: nopl 0x00000000(%eax)
    8: nopl 0x00000000(%eax,%eax,1)
+   Note: All the above are assumed to be a single instruction.
+	There is kernel code that depends on this.
 */
 #define P6_NOP1	GENERIC_NOP1
 #define P6_NOP2	".byte 0x66,0x90\n"
-- 
cgit v1.2.3


From 5367b6887e7d8c870a5da7d9b8c6e9c207684e43 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Thu, 10 Sep 2009 02:53:50 +0100
Subject: x86: Fix code patching for paravirt-alternatives on 486

As reported in <http://bugs.debian.org/511703> and
<http://bugs.debian.org/515982>, kernels with paravirt-alternatives
enabled crash in text_poke_early() on at least some 486-class
processors.

The problem is that text_poke_early() itself uses inline functions
affected by paravirt-alternatives and so will modify instructions that
have already been prefetched.  Pentium and later processors will
invalidate the prefetched instructions in this case, but 486-class
processors do not.

Change sync_core() to limit prefetching on 486-class (and 386-class)
processors, and move the call to sync_core() above the call to the
modifiable local_irq_restore().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
LKML-Reference: <1252547631.3423.134.camel@localhost>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/processor.h | 16 +++++++++++++---
 arch/x86/kernel/alternative.c    |  2 +-
 2 files changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c7768269b1c..2db56c57a28 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -703,13 +703,23 @@ static inline void cpu_relax(void)
 	rep_nop();
 }
 
-/* Stop speculative execution: */
+/* Stop speculative execution and prefetching of modified code. */
 static inline void sync_core(void)
 {
 	int tmp;
 
-	asm volatile("cpuid" : "=a" (tmp) : "0" (1)
-		     : "ebx", "ecx", "edx", "memory");
+#if defined(CONFIG_M386) || defined(CONFIG_M486)
+	if (boot_cpu_data.x86 < 5)
+		/* There is no speculative execution.
+		 * jmp is a barrier to prefetching. */
+		asm volatile("jmp 1f\n1:\n" ::: "memory");
+	else
+#endif
+		/* cpuid is a barrier to speculative execution.
+		 * Prefetched instructions are automatically
+		 * invalidated when modified. */
+		asm volatile("cpuid" : "=a" (tmp) : "0" (1)
+			     : "ebx", "ecx", "edx", "memory");
 }
 
 static inline void __monitor(const void *eax, unsigned long ecx,
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index f5765870257..b8ebd0b689b 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -490,8 +490,8 @@ void *text_poke_early(void *addr, const void *opcode, size_t len)
 	unsigned long flags;
 	local_irq_save(flags);
 	memcpy(addr, opcode, len);
-	local_irq_restore(flags);
 	sync_core();
+	local_irq_restore(flags);
 	/* Could also do a CLFLUSH here to speed up CPU recovery; but
 	   that causes hangs on some VIA CPUs. */
 	return addr;
-- 
cgit v1.2.3


From 80938332d8cf652f6b16e0788cf0ca136befe0b5 Mon Sep 17 00:00:00 2001
From: Michal Hocko <mhocko@suse.cz>
Date: Tue, 8 Sep 2009 11:01:55 +0200
Subject: x86: Increase MIN_GAP to include randomized stack

Currently we are not including randomized stack size when calculating
mmap_base address in arch_pick_mmap_layout for topdown case. This might
cause that mmap_base starts in the stack reserved area because stack is
randomized by 1GB for 64b (8MB for 32b) and the minimum gap is 128MB.

If the stack really grows down to mmap_base then we can get silent mmap
region overwrite by the stack values.

Let's include maximum stack randomization size into MIN_GAP which is
used as the low bound for the gap in mmap.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
LKML-Reference: <1252400515-6866-1-git-send-email-mhocko@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Stable Team <stable@kernel.org>
---
 arch/x86/include/asm/elf.h |  2 ++
 arch/x86/mm/mmap.c         | 17 +++++++++++++++--
 2 files changed, 17 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 83c1bc8d2e8..456a304b817 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -299,6 +299,8 @@ do {									\
 
 #ifdef CONFIG_X86_32
 
+#define STACK_RND_MASK (0x7ff)
+
 #define VDSO_HIGH_BASE		(__fix_to_virt(FIX_VDSO))
 
 #define ARCH_DLINFO		ARCH_DLINFO_IA32(vdso_enabled)
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 16582960056..c8191defc38 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -29,13 +29,26 @@
 #include <linux/random.h>
 #include <linux/limits.h>
 #include <linux/sched.h>
+#include <asm/elf.h>
+
+static unsigned int stack_maxrandom_size(void)
+{
+	unsigned int max = 0;
+	if ((current->flags & PF_RANDOMIZE) &&
+		!(current->personality & ADDR_NO_RANDOMIZE)) {
+		max = ((-1U) & STACK_RND_MASK) << PAGE_SHIFT;
+	}
+
+	return max;
+}
+
 
 /*
  * Top of mmap area (just below the process stack).
  *
- * Leave an at least ~128 MB hole.
+ * Leave an at least ~128 MB hole with possible stack randomization.
  */
-#define MIN_GAP (128*1024*1024)
+#define MIN_GAP (128*1024*1024UL + stack_maxrandom_size())
 #define MAX_GAP (TASK_SIZE/6*5)
 
 /*
-- 
cgit v1.2.3


From 8708d002c416b8bf87351bc626d15d7407896edb Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Thu, 10 Sep 2009 12:47:20 +0000
Subject: powerpc/irq: Improve nanodoc

The OF helpers look like nanodoc but are missing the header. Fix this and a
typo (s/nad/and/) while we are here.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/irq.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 0a5137676e1..bbcd1aaf3df 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -302,7 +302,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
 
 /* -- OF helpers -- */
 
-/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+/**
+ * irq_create_of_mapping - Map a hardware interrupt into linux virq space
  * @controller: Device node of the interrupt controller
  * @inspec: Interrupt specifier from the device-tree
  * @intsize: Size of the interrupt specifier from the device-tree
@@ -314,8 +315,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
 extern unsigned int irq_create_of_mapping(struct device_node *controller,
 					  u32 *intspec, unsigned int intsize);
 
-
-/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+/**
+ * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
  * @device: Device node of the device whose interrupt is to be mapped
  * @index: Index of the interrupt to map
  *
-- 
cgit v1.2.3


From 757cbd46d11cfa7506b7dd5dd6657ae645bf6a17 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 8 Sep 2009 17:38:52 +0000
Subject: powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops

The following commit introduced a compile error since it removed
the implementation of smp_85xx_basic_setup:

commit 77c0a700c1c292edafa11c1e52821ce4636f81b0
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date:   Fri Aug 28 14:25:04 2009 +1000

    powerpc: Properly start decrementer on BookE secondary CPUs

Make it so that smp_ops probe() and setup_cpu() can be set to NULL.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/smp.c         | 10 +++++++---
 arch/powerpc/platforms/85xx/smp.c | 10 ----------
 2 files changed, 7 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 96f107cc016..d387b3937cc 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -269,7 +269,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	cpu_callin_map[boot_cpuid] = 1;
 
 	if (smp_ops)
-		max_cpus = smp_ops->probe();
+		if (smp_ops->probe)
+			max_cpus = smp_ops->probe();
+		else
+			max_cpus = NR_CPUS;
 	else
 		max_cpus = 1;
  
@@ -493,7 +496,8 @@ int __devinit start_secondary(void *unused)
 	preempt_disable();
 	cpu_callin_map[cpu] = 1;
 
-	smp_ops->setup_cpu(cpu);
+	if (smp_ops->setup_cpu)
+		smp_ops->setup_cpu(cpu);
 	if (smp_ops->take_timebase)
 		smp_ops->take_timebase();
 
@@ -556,7 +560,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	old_mask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
 	
-	if (smp_ops)
+	if (smp_ops && smp_ops->setup_cpu)
 		smp_ops->setup_cpu(boot_cpuid);
 
 	set_cpus_allowed(current, old_mask);
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 94f901da491..04160a4cc69 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -88,25 +88,15 @@ struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
 };
 
-static int __init smp_dummy_probe(void)
-{
-	return NR_CPUS;
-}
-
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
 
-	smp_85xx_ops.message_pass = NULL;
-
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np) {
 		smp_85xx_ops.probe = smp_mpic_probe;
 		smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
 		smp_85xx_ops.message_pass = smp_mpic_message_pass;
-	} else {
-		smp_85xx_ops.probe = smp_dummy_probe;
-		smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
 	}
 
 	if (cpu_has_feature(CPU_FTR_DBELL))
-- 
cgit v1.2.3


From a6dbf93a2ad853585409e715eb96dca9177e3c39 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Wed, 9 Sep 2009 01:26:03 +0000
Subject: powerpc: Fix bug where perf_counters breaks oprofile

Currently there is a bug where if you use oprofile on a pSeries
machine, then use perf_counters, then use oprofile again, oprofile
will not work correctly; it will lose the PMU configuration the next
time the hypervisor does a partition context switch, and thereafter
won't count anything.

Maynard Johnson identified the sequence causing the problem:
- oprofile setup calls ppc_enable_pmcs(), which calls
  pseries_lpar_enable_pmcs, which tells the hypervisor that we want
  to use the PMU, and sets the "PMU in use" flag in the lppaca.
  This flag tells the hypervisor whether it needs to save and restore
  the PMU config.
- The perf_counter code sets and clears the "PMU in use" flag directly
  as it context-switches the PMU between tasks, and leaves it clear
  when it finishes.
- oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs,
  which does nothing because it has already been called.  In particular
  it doesn't set the "PMU in use" flag.

This fixes the problem by arranging for ppc_enable_pmcs to always set
the "PMU in use" flag.  It makes the perf_counter code call
ppc_enable_pmcs also rather than calling the lower-level function
directly, and removes the setting of the "PMU in use" flag from
pseries_lpar_enable_pmcs, since that is now done in its caller.

This also removes the declaration of pasemi_enable_pmcs because it
isn't defined anywhere.

Reported-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pmc.h         | 16 ++++++++++++++--
 arch/powerpc/kernel/perf_counter.c     | 13 +++----------
 arch/powerpc/kernel/sysfs.c            |  3 +++
 arch/powerpc/platforms/pseries/setup.c |  4 ----
 4 files changed, 20 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index d6a616a1b3e..ccc68b50d05 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -27,10 +27,22 @@ extern perf_irq_t perf_irq;
 
 int reserve_pmc_hardware(perf_irq_t new_perf_irq);
 void release_pmc_hardware(void);
+void ppc_enable_pmcs(void);
 
 #ifdef CONFIG_PPC64
-void power4_enable_pmcs(void);
-void pasemi_enable_pmcs(void);
+#include <asm/lppaca.h>
+
+static inline void ppc_set_pmu_inuse(int inuse)
+{
+	get_lppaca()->pmcregs_in_use = inuse;
+}
+
+extern void power4_enable_pmcs(void);
+
+#else /* CONFIG_PPC64 */
+
+static inline void ppc_set_pmu_inuse(int inuse) { }
+
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 70e1f57f7dd..ccd6b213564 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -62,7 +62,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
 {
 	return 0;
 }
-static inline void perf_set_pmu_inuse(int inuse) { }
 static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
 static inline u32 perf_get_misc_flags(struct pt_regs *regs)
 {
@@ -93,11 +92,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
 	return 0;
 }
 
-static inline void perf_set_pmu_inuse(int inuse)
-{
-	get_lppaca()->pmcregs_in_use = inuse;
-}
-
 /*
  * The user wants a data address recorded.
  * If we're not doing instruction sampling, give them the SDAR
@@ -531,8 +525,7 @@ void hw_perf_disable(void)
 		 * Check if we ever enabled the PMU on this cpu.
 		 */
 		if (!cpuhw->pmcs_enabled) {
-			if (ppc_md.enable_pmcs)
-				ppc_md.enable_pmcs();
+			ppc_enable_pmcs();
 			cpuhw->pmcs_enabled = 1;
 		}
 
@@ -594,7 +587,7 @@ void hw_perf_enable(void)
 		mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
 		mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
 		if (cpuhw->n_counters == 0)
-			perf_set_pmu_inuse(0);
+			ppc_set_pmu_inuse(0);
 		goto out_enable;
 	}
 
@@ -627,7 +620,7 @@ void hw_perf_enable(void)
 	 * bit set and set the hardware counters to their initial values.
 	 * Then unfreeze the counters.
 	 */
-	perf_set_pmu_inuse(1);
+	ppc_set_pmu_inuse(1);
 	mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
 	mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
 	mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index f41aec85aa4..956ab33fd73 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -17,6 +17,7 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/smp.h>
+#include <asm/pmc.h>
 
 #include "cacheinfo.h"
 
@@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled);
 
 void ppc_enable_pmcs(void)
 {
+	ppc_set_pmu_inuse(1);
+
 	/* Only need to enable them once */
 	if (__get_cpu_var(pmcs_enabled))
 		return;
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 8d75ea21296..ca5f2e10972 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -223,10 +223,6 @@ static void pseries_lpar_enable_pmcs(void)
 	set = 1UL << 63;
 	reset = 0;
 	plpar_hcall_norets(H_PERFMON, set, reset);
-
-	/* instruct hypervisor to maintain PMCs */
-	if (firmware_has_feature(FW_FEATURE_SPLPAR))
-		get_lppaca()->pmcregs_in_use = 1;
 }
 
 static void __init pseries_discover_pic(void)
-- 
cgit v1.2.3


From e51ee31e8af22948dcc3b115978469b09c96c3fd Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Wed, 9 Sep 2009 20:28:49 +0000
Subject: powerpc/perf_counters: Reduce stack usage of power_check_constraints

Michael Ellerman reported stack-frame size warnings being produced
for power_check_constraints(), which uses an 8*8 array of u64 and
two 8*8 arrays of unsigned long, which are currently allocated on the
stack, along with some other smaller variables.  These arrays come
to 1.5kB on 64-bit or 1kB on 32-bit, which is a bit too much for the
stack.

This fixes the problem by putting these arrays in the existing
per-cpu cpu_hw_counters struct.  This is OK because two of the call
sites have interrupts disabled already; for the third call site we
use get_cpu_var, which disables preemption, so we know we won't
get a context switch while we're in power_check_constraints().
Note that power_check_constraints() can be called during context
switch but is not called from interrupts.

Reported-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/perf_counter.c | 55 ++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index ccd6b213564..7ceefaf3a7f 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -32,6 +32,9 @@ struct cpu_hw_counters {
 	unsigned long mmcr[3];
 	struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS];
 	u8  limited_hwidx[MAX_LIMITED_HWCOUNTERS];
+	u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
 };
 DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters);
 
@@ -239,13 +242,11 @@ static void write_pmc(int idx, unsigned long val)
  * and see if any combination of alternative codes is feasible.
  * The feasible set is returned in event[].
  */
-static int power_check_constraints(u64 event[], unsigned int cflags[],
+static int power_check_constraints(struct cpu_hw_counters *cpuhw,
+				   u64 event[], unsigned int cflags[],
 				   int n_ev)
 {
 	unsigned long mask, value, nv;
-	u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
 	unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
 	int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS];
 	int i, j;
@@ -260,21 +261,23 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 		if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
 		    && !ppmu->limited_pmc_event(event[i])) {
 			ppmu->get_alternatives(event[i], cflags[i],
-					       alternatives[i]);
-			event[i] = alternatives[i][0];
+					       cpuhw->alternatives[i]);
+			event[i] = cpuhw->alternatives[i][0];
 		}
-		if (ppmu->get_constraint(event[i], &amasks[i][0],
-					 &avalues[i][0]))
+		if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0],
+					 &cpuhw->avalues[i][0]))
 			return -1;
 	}
 	value = mask = 0;
 	for (i = 0; i < n_ev; ++i) {
-		nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf);
+		nv = (value | cpuhw->avalues[i][0]) +
+			(value & cpuhw->avalues[i][0] & addf);
 		if ((((nv + tadd) ^ value) & mask) != 0 ||
-		    (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0)
+		    (((nv + tadd) ^ cpuhw->avalues[i][0]) &
+		     cpuhw->amasks[i][0]) != 0)
 			break;
 		value = nv;
-		mask |= amasks[i][0];
+		mask |= cpuhw->amasks[i][0];
 	}
 	if (i == n_ev)
 		return 0;	/* all OK */
@@ -285,10 +288,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 	for (i = 0; i < n_ev; ++i) {
 		choice[i] = 0;
 		n_alt[i] = ppmu->get_alternatives(event[i], cflags[i],
-						  alternatives[i]);
+						  cpuhw->alternatives[i]);
 		for (j = 1; j < n_alt[i]; ++j)
-			ppmu->get_constraint(alternatives[i][j],
-					     &amasks[i][j], &avalues[i][j]);
+			ppmu->get_constraint(cpuhw->alternatives[i][j],
+					     &cpuhw->amasks[i][j],
+					     &cpuhw->avalues[i][j]);
 	}
 
 	/* enumerate all possibilities and see if any will work */
@@ -307,11 +311,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 		 * where k > j, will satisfy the constraints.
 		 */
 		while (++j < n_alt[i]) {
-			nv = (value | avalues[i][j]) +
-				(value & avalues[i][j] & addf);
+			nv = (value | cpuhw->avalues[i][j]) +
+				(value & cpuhw->avalues[i][j] & addf);
 			if ((((nv + tadd) ^ value) & mask) == 0 &&
-			    (((nv + tadd) ^ avalues[i][j])
-			     & amasks[i][j]) == 0)
+			    (((nv + tadd) ^ cpuhw->avalues[i][j])
+			     & cpuhw->amasks[i][j]) == 0)
 				break;
 		}
 		if (j >= n_alt[i]) {
@@ -333,7 +337,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 			svalues[i] = value;
 			smasks[i] = mask;
 			value = nv;
-			mask |= amasks[i][j];
+			mask |= cpuhw->amasks[i][j];
 			++i;
 			j = -1;
 		}
@@ -341,7 +345,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 
 	/* OK, we have a feasible combination, tell the caller the solution */
 	for (i = 0; i < n_ev; ++i)
-		event[i] = alternatives[i][choice[i]];
+		event[i] = cpuhw->alternatives[i][choice[i]];
 	return 0;
 }
 
@@ -745,7 +749,7 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader,
 		return -EAGAIN;
 	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n))
 		return -EAGAIN;
-	i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0);
+	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
 	if (i < 0)
 		return -EAGAIN;
 	cpuhw->n_counters = n0 + n;
@@ -800,7 +804,7 @@ static int power_pmu_enable(struct perf_counter *counter)
 	cpuhw->flags[n0] = counter->hw.counter_base;
 	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1))
 		goto out;
-	if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1))
+	if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
 		goto out;
 
 	counter->hw.config = cpuhw->events[n0];
@@ -1005,6 +1009,7 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
 	unsigned int cflags[MAX_HWCOUNTERS];
 	int n;
 	int err;
+	struct cpu_hw_counters *cpuhw;
 
 	if (!ppmu)
 		return ERR_PTR(-ENXIO);
@@ -1083,7 +1088,11 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
 	cflags[n] = flags;
 	if (check_excludes(ctrs, cflags, n, 1))
 		return ERR_PTR(-EINVAL);
-	if (power_check_constraints(events, cflags, n + 1))
+
+	cpuhw = &get_cpu_var(cpu_hw_counters);
+	err = power_check_constraints(cpuhw, events, cflags, n + 1);
+	put_cpu_var(cpu_hw_counters);
+	if (err)
 		return ERR_PTR(-EINVAL);
 
 	counter->hw.config = events[n];
-- 
cgit v1.2.3


From c6c9eacef09a94b5866b83556196440aca876702 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 8 Sep 2009 14:16:58 +0000
Subject: powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead

Also remove a duplicate setting of it in the context switch path
on BookE.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/process.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 678ff132e8b..0a321643305 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -284,14 +284,13 @@ int set_dabr(unsigned long dabr)
 		return ppc_md.set_dabr(dabr);
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
-	mtspr(SPRN_DABR, dabr);
-#endif
-
 #if defined(CONFIG_BOOKE)
 	mtspr(SPRN_DAC1, dabr);
+#elif defined(CONFIG_PPC_BOOK3S)
+	mtspr(SPRN_DABR, dabr);
 #endif
 
+
 	return 0;
 }
 
@@ -372,15 +371,16 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #endif /* CONFIG_SMP */
 
-	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
-		set_dabr(new->thread.dabr);
-
 #if defined(CONFIG_BOOKE)
 	/* If new thread DAC (HW breakpoint) is the same then leave it */
 	if (new->thread.dabr)
 		set_dabr(new->thread.dabr);
+#else
+	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
+		set_dabr(new->thread.dabr);
 #endif
 
+
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
-- 
cgit v1.2.3


From 125ecce6960e3365433ec5c734365a51e88bf3d9 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 10 Sep 2009 01:39:37 +0000
Subject: sh: Add I2C device support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 428d1187ce5..6721b2516a7 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -324,6 +324,13 @@ static struct platform_device ceu1_device = {
 	},
 };
 
+/* I2C device */
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -506,10 +513,14 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
 	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
 
+	/* enable I2C device */
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
-device_initcall(devices_setup);
+arch_initcall(devices_setup);
 
 static struct sh_machine_vector mv_ecovec __initmv = {
 	.mv_name	= "R0P7724 (EcoVec)",
-- 
cgit v1.2.3


From 378a569eaa2bff8f22bb312a76cf0a97d5d329ae Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 10 Sep 2009 01:39:52 +0000
Subject: sh: add romimage-macros.h

romimage macros which are used in kfr2r09 is very useful for other board.
This patch divides kfr2r09's romimage.h into
romimage-macros and partner-jet-setup.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/romimage-macros.h        | 73 ++++++++++++++++++++++++++++
 arch/sh/include/mach-kfr2r09/mach/romimage.h | 70 +-------------------------
 2 files changed, 74 insertions(+), 69 deletions(-)
 create mode 100644 arch/sh/include/asm/romimage-macros.h

(limited to 'arch')

diff --git a/arch/sh/include/asm/romimage-macros.h b/arch/sh/include/asm/romimage-macros.h
new file mode 100644
index 00000000000..ae17a150bb5
--- /dev/null
+++ b/arch/sh/include/asm/romimage-macros.h
@@ -0,0 +1,73 @@
+#ifndef __ROMIMAGE_MACRO_H
+#define __ROMIMAGE_MACRO_H
+
+/* The LIST command is used to include comments in the script */
+.macro	LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro  ED, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.l r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro  EW, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.w r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro  EB, addr, data
+	mov.l 1f, r1
+	mov.l 2f, r0
+	mov.b r0, @r1
+	bra 3f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :	.long \data
+3 :
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro  WAIT, time
+	mov.l  2f, r3
+1 :
+	nop
+	tst     r3, r3
+	bf/s    1b
+	dt      r3
+	bra	3f
+	 nop
+	.align 2
+2 :	.long \time * 100
+3 :
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro  DD, addr, addr2, nr
+	mov.l 1f, r1
+	mov.l @r1, r0
+	bra 2f
+	 nop
+	.align 2
+1 :	.long \addr
+2 :
+.endm
+
+#endif /* __ROMIMAGE_MACRO_H */
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index 39ee7944356..a110823f2bd 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -3,75 +3,7 @@
  * the assembly code is the first code to be executed in the romImage
  */
 
-/* The LIST command is used to include comments in the script */
-.macro	LIST comment
-.endm
-
-/* The ED command is used to write a 32-bit word */
-.macro  ED, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.l r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The EW command is used to write a 16-bit word */
-.macro  EW, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.w r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The EB command is used to write an 8-bit word */
-.macro  EB, addr, data
-        mov.l 1f ,r1
-        mov.l 2f ,r0
-        mov.b r0, @r1
-	bra 3f
-	 nop
-	.align 2
-1:	.long \addr
-2:	.long \data
-3:
-.endm
-
-/* The WAIT command is used to delay the execution */
-.macro  WAIT, time
-        mov.l  2f ,r3
-1:
-        nop
-        tst     r3, r3
-        bf/s    1b
-         dt      r3
-	bra	3f
-	 nop
-	.align 2
-2:	.long \time * 100
-3:
-.endm
-
-/* The DD command is used to read a 32-bit word */
-.macro  DD, addr, addr2, nr
-        mov.l 1f ,r1
-        mov.l @r1, r0
-	bra 2f
-	 nop
-	.align 2
-1:	.long \addr
-2:
-.endm
-
+#include <asm/romimage-macros.h>
 #include "partner-jet-setup.txt"
 
 	/* execute icbi after enabling cache */
-- 
cgit v1.2.3


From be4ebf999a38dfe9d7d705c4913624ec816c48f2 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 10 Sep 2009 01:39:55 +0000
Subject: sh: Add romImage support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c               |  1 +
 .../mach-ecovec24/mach/partner-jet-setup.txt       | 79 ++++++++++++++++++++++
 arch/sh/include/mach-ecovec24/mach/romimage.h      | 20 ++++++
 3 files changed, 100 insertions(+)
 create mode 100644 arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
 create mode 100644 arch/sh/include/mach-ecovec24/mach/romimage.h

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6721b2516a7..b44c06058e3 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -378,6 +378,7 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_LNKSTA,       NULL);
 
 	/* enable USB */
+	ctrl_outw(0x0000, 0xA4D80000);
 	gpio_request(GPIO_PTB3,  NULL);
 	gpio_request(GPIO_PTB4,  NULL);
 	gpio_request(GPIO_PTB5,  NULL);
diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
new file mode 100644
index 00000000000..ae805baec22
--- /dev/null
+++ b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
@@ -0,0 +1,79 @@
+LIST "partner-jet-setup.txt"
+LIST "(C) Copyright 2009 Renesas Solutions Corp"
+LIST "Kuninori Morimoto <morimoto.kuninori@renesas.com>"
+LIST "--------------------------------"
+LIST "zImage (RAM boot)"
+LIST "This script can be used to boot the kernel from RAM via JTAG:"
+LIST "> < partner-jet-setup.txt"
+LIST "> RD zImage, 0xa8800000"
+LIST "> G=0xa8800000"
+LIST "--------------------------------"
+LIST "romImage (Flash boot)"
+LIST "Use the following command to burn the zImage to flash via JTAG:"
+LIST "> RD romImage, 0"
+LIST "--------------------------------"
+
+LIST "disable watchdog"
+EW 0xa4520004, 0xa507
+
+LIST "MMU"
+ED 0xff000010, 0x00000004
+
+LIST "setup clocks"
+ED 0xa4150024, 0x00004000
+ED 0xa4150000, 0x8E003508
+ED 0xa4150004, 0x00000000
+
+WAIT 1
+
+LIST "BSC"
+ED 0xff800020, 0xa5a50000
+ED 0xfec10000, 0x00000013
+ED 0xfec10004, 0x11110400
+ED 0xfec10024, 0x00000440
+
+WAIT 1
+
+LIST "setup sdram"
+ED 0xfd000108, 0x00000181
+ED 0xfd000020, 0x015B0002
+ED 0xfd000030, 0x03061502
+ED 0xfd000034, 0x02020102
+ED 0xfd000038, 0x01090305
+ED 0xfd00003c, 0x00000002
+ED 0xfd000008, 0x00000005
+ED 0xfd000018, 0x00000001
+
+WAIT 1
+
+ED 0xfd000014, 0x00000002
+ED 0xfd000060, 0x00020000
+ED 0xfd000060, 0x00030000
+ED 0xfd000060, 0x00010040
+ED 0xfd000060, 0x00000532
+ED 0xfd000014, 0x00000002
+ED 0xfd000014, 0x00000004
+ED 0xfd000014, 0x00000004
+ED 0xfd000060, 0x00000432
+ED 0xfd000060, 0x000103C0
+ED 0xfd000060, 0x00010040
+
+WAIT 1
+
+ED 0xfd000010, 0x00000001
+ED 0xfd000044, 0x00000613
+ED 0xfd000048, 0x238C003A
+ED 0xfd000014, 0x00000002
+
+LIST "Dummy read"
+DD 0x0c400000, 0x0c400000
+
+ED 0xfd000014, 0x00000002
+ED 0xfd000014, 0x00000004
+ED 0xfd000108, 0x00000080
+ED 0xfd000040, 0x00010000
+
+WAIT 1
+
+LIST "setup cache"
+ED 0xff00001c, 0x0000090b
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
new file mode 100644
index 00000000000..1c8787ecb1c
--- /dev/null
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -0,0 +1,20 @@
+/* EcoVec board specific boot code:
+ * converts the "partner-jet-script.txt" script into assembly
+ * the assembly code is the first code to be executed in the romImage
+ */
+
+#include <asm/romimage-macros.h>
+#include "partner-jet-setup.txt"
+
+	/* execute icbi after enabling cache */
+	mov.l	1f, r0
+	icbi	@r0
+
+	/* jump to cached area */
+	mova	2f, r0
+	jmp	@r0
+	nop
+
+	.align 2
+1 :	.long 0xa8000000
+2 :
-- 
cgit v1.2.3


From 4907d57f76dc1d6c49c19c653fb705b9a2a8487c Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 10 Sep 2009 01:39:58 +0000
Subject: sh: EcoVec24: write MAC address in boot

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 81 +++++++++++++++++++++++++++++++++++-
 1 file changed, 79 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index b44c06058e3..6cd1b782845 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/i2c.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/heartbeat.h>
@@ -342,9 +343,77 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&ceu1_device,
 };
 
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+	struct i2c_msg msg[2];
+	u8 buf;
+	int ret;
+
+	msg[0].addr  = EEPROM_ADDR;
+	msg[0].flags = 0;
+	msg[0].len   = 1;
+	msg[0].buf   = &command;
+
+	msg[1].addr  = EEPROM_ADDR;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len   = 1;
+	msg[1].buf   = &buf;
+
+	ret = i2c_transfer(a, msg, 2);
+	if (ret < 0) {
+		printk(KERN_ERR "error %d\n", ret);
+		buf = 0xff;
+	}
+
+	return buf;
+}
+
+#define MAC_LEN 6
+static void __init sh_eth_init(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(1);
+	struct clk *eth_clk;
+	u8 mac[MAC_LEN];
+	int i;
+
+	if (!a) {
+		pr_err("can not get I2C 1\n");
+		return;
+	}
+
+	eth_clk = clk_get(NULL, "eth0");
+	if (!eth_clk) {
+		pr_err("can not get eth0 clk\n");
+		return;
+	}
+
+	/* read MAC address frome EEPROM */
+	for (i = 0; i < MAC_LEN; i++) {
+		mac[i] = mac_read(a, 0x10 + i);
+		msleep(10);
+	}
+
+	/* clock enable */
+	clk_enable(eth_clk);
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl((mac[0] << 24) |
+		  (mac[1] << 16) |
+		  (mac[2] <<  8) |
+		  (mac[3] <<  0), SH_ETH_MAHR);
+	ctrl_outl((mac[4] <<  8) |
+		  (mac[5] <<  0), SH_ETH_MALR);
+
+	clk_put(eth_clk);
+}
+
 #define PORT_HIZA 0xA4050158
 #define IODRIVEA  0xA405018A
-static int __init devices_setup(void)
+static int __init arch_setup(void)
 {
 	/* enable SCIFA0 */
 	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
@@ -521,7 +590,15 @@ static int __init devices_setup(void)
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }
-arch_initcall(devices_setup);
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	sh_eth_init();
+	return 0;
+}
+device_initcall(devices_setup);
+
 
 static struct sh_machine_vector mv_ecovec __initmv = {
 	.mv_name	= "R0P7724 (EcoVec)",
-- 
cgit v1.2.3


From 643e9d10957e80ebbb3aabbb43788eb5cf9ac033 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 10 Sep 2009 01:40:00 +0000
Subject: sh: EcoVec24: add HIZA setting for LED

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 6cd1b782845..4d6d5884c67 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -428,6 +428,7 @@ static int __init arch_setup(void)
 	gpio_direction_output(GPIO_PTG1, 0);
 	gpio_direction_output(GPIO_PTG2, 0);
 	gpio_direction_output(GPIO_PTG3, 0);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
 
 	/* enable SH-Eth */
 	gpio_request(GPIO_PTA1, NULL);
-- 
cgit v1.2.3


From c386cff1bf0b9bf37d33291e3c96034e83da2af2 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 10 Sep 2009 01:40:02 +0000
Subject: sh: USB disable process is needed if romImage boot for EcoVec24

when you use romImage on EcoVec24, 1st Linux will enable USB device.
But no-one disable it.
So re-started Linux will get interrupt before USB driver is attached.
This patch disable USB device at first

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
index ae805baec22..8b8e4fa1fee 100644
--- a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
+++ b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
@@ -77,3 +77,6 @@ WAIT 1
 
 LIST "setup cache"
 ED 0xff00001c, 0x0000090b
+
+LIST "disable USB"
+EW 0xA4D80000, 0x0000
-- 
cgit v1.2.3


From 094f7bd80c18b3e2c148db6fdf224ced3ee705a5 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 10 Sep 2009 01:40:05 +0000
Subject: sh: Add EcoVec24 romImage defconfig

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/ecovec24-romimage_defconfig | 1032 +++++++++++++++++++++++++++
 1 file changed, 1032 insertions(+)
 create mode 100644 arch/sh/configs/ecovec24-romimage_defconfig

(limited to 'arch')

diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
new file mode 100644
index 00000000000..9a22c64775b
--- /dev/null
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -0,0 +1,1032 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc7
+# Tue Sep  8 13:56:18 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+CONFIG_SH_ECOVEC=y
+
+#
+# Timer and clock configuration
+#
+# CONFIG_SH_TIMER_TMU is not set
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_SH_CLK_CPG=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
-- 
cgit v1.2.3


From 6a78ec16ca40cc98e387b2d8d80adbeedda02bbc Mon Sep 17 00:00:00 2001
From: Yusuke Goda <goda.yusuke@renesas.com>
Date: Fri, 11 Sep 2009 02:42:46 +0000
Subject: sh: Fix the indication point of the liquid crystal of
 AP-325RXA(AP3300)

Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 19eea4ab1cc..bcf1f40bcc6 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -188,7 +188,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.name = "LB070WV1",
 			.xres = 800,
 			.yres = 480,
-			.left_margin = 40,
+			.left_margin = 32,
 			.right_margin = 160,
 			.hsync_len = 8,
 			.upper_margin = 63,
-- 
cgit v1.2.3


From bd96f37895197563bc1d6d6f7c012b3ae7df1c45 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 4 Sep 2009 23:46:18 -0700
Subject: Input: pxa27x_keypad - allow modifying keymap from userspace

Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-pxa/include/mach/pxa27x_keypad.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index 63e8965ad85..7b4eadc6df3 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -6,6 +6,8 @@
 
 #define MAX_MATRIX_KEY_ROWS	(8)
 #define MAX_MATRIX_KEY_COLS	(8)
+#define MATRIX_ROW_SHIFT	(3)
+#define MAX_DIRECT_KEY_NUM	(8)
 
 /* pxa3xx keypad platform specific parameters
  *
@@ -34,7 +36,7 @@ struct pxa27x_keypad_platform_data {
 
 	/* direct keys */
 	int		direct_key_num;
-	unsigned int	direct_key_map[8];
+	unsigned int	direct_key_map[MAX_DIRECT_KEY_NUM];
 
 	/* rotary encoders 0 */
 	int		enable_rotary0;
-- 
cgit v1.2.3


From 1d6ed32226326a6e6cd67cd9ee4294bcbb0c9a15 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Sep 2009 15:36:09 +1000
Subject: powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline

That code uses dma_mapping_error() with a NULL device, which is
a bad idea :-) The proper fix might be to start using some kind
of pseudo device for all these low level mappings with the
hypervisor but that will be for another day. Since it directly
calls into the low level iommu code, I see no problem in having
it directly test against DMA_ERROR_CODE instead of using the
accessors with a NULL argument for now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/iseries/mf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index fef4d515051..0d9343df35b 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -872,7 +872,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
 		count = 256 - off;
 
 	dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(NULL, dma_addr))
+	if (dma_addr == DMA_ERROR_CODE)
 		return -ENOMEM;
 	memset(page, 0, off + count);
 	memset(&vsp_cmd, 0, sizeof(vsp_cmd));
-- 
cgit v1.2.3


From d331d8305cba713605854aab63a000fb892353a7 Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Thu, 13 Aug 2009 09:03:02 +0100
Subject: powerpc/nvram: Enable use Generic NVRAM driver for different size
 chips

Remove the reliance on a staticly defined NVRAM size, allowing
platforms to support NVRAMs with sizes differing from the standard.

A fall back value is provided for platforms not supporting this extension.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/nvram.h | 3 +++
 arch/powerpc/kernel/setup_32.c   | 8 ++++++++
 2 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
index efde5ac82f7..6c587eddee5 100644
--- a/arch/powerpc/include/asm/nvram.h
+++ b/arch/powerpc/include/asm/nvram.h
@@ -107,6 +107,9 @@ extern void	pmac_xpram_write(int xpaddr, u8 data);
 /* Synchronize NVRAM */
 extern void	nvram_sync(void);
 
+/* Determine NVRAM size */
+extern ssize_t nvram_get_size(void);
+
 /* Normal access to NVRAM */
 extern unsigned char nvram_read_byte(int i);
 extern void nvram_write_byte(unsigned char c, int i);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index e1e3059cf34..53bcf3d792d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -210,6 +210,14 @@ void nvram_write_byte(unsigned char val, int addr)
 }
 EXPORT_SYMBOL(nvram_write_byte);
 
+ssize_t nvram_get_size(void)
+{
+	if (ppc_md.nvram_size)
+		return ppc_md.nvram_size();
+	return -1;
+}
+EXPORT_SYMBOL(nvram_get_size);
+
 void nvram_sync(void)
 {
 	if (ppc_md.nvram_sync)
-- 
cgit v1.2.3


From 62733e5a5a480a893e56fa6133ae90904d857bc4 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:15 +0200
Subject: [S390] cio: move scsw helper functions to header file

All scsw helper functions are very short and usage of them shouldn't
result in function calls. Therefore we move them to a separate header
file.
Also saves a lot of EXPORT_SYMBOLs.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/chsc.h |  28 ++
 arch/s390/include/asm/cio.h  | 223 +---------
 arch/s390/include/asm/scsw.h | 956 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 985 insertions(+), 222 deletions(-)
 create mode 100644 arch/s390/include/asm/scsw.h

(limited to 'arch')

diff --git a/arch/s390/include/asm/chsc.h b/arch/s390/include/asm/chsc.h
index 807997f7414..4943654ed7f 100644
--- a/arch/s390/include/asm/chsc.h
+++ b/arch/s390/include/asm/chsc.h
@@ -125,4 +125,32 @@ struct chsc_cpd_info {
 #define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
 #define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
 
+#ifdef __KERNEL__
+
+struct css_general_char {
+	u64 : 12;
+	u32 dynio : 1;	 /* bit 12 */
+	u32 : 28;
+	u32 aif : 1;	 /* bit 41 */
+	u32 : 3;
+	u32 mcss : 1;	 /* bit 45 */
+	u32 fcs : 1;	 /* bit 46 */
+	u32 : 1;
+	u32 ext_mb : 1;  /* bit 48 */
+	u32 : 7;
+	u32 aif_tdd : 1; /* bit 56 */
+	u32 : 1;
+	u32 qebsm : 1;	 /* bit 58 */
+	u32 : 8;
+	u32 aif_osa : 1; /* bit 67 */
+	u32 : 14;
+	u32 cib : 1;	 /* bit 82 */
+	u32 : 5;
+	u32 fcx : 1;	 /* bit 88 */
+	u32 : 7;
+}__attribute__((packed));
+
+extern struct css_general_char css_general_characteristics;
+
+#endif /* __KERNEL__ */
 #endif
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index 619bf94b11f..e85679af54d 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -15,228 +15,7 @@
 #define LPM_ANYPATH 0xff
 #define __MAX_CSSID 0
 
-/**
- * struct cmd_scsw - command-mode subchannel status word
- * @key: subchannel key
- * @sctl: suspend control
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @pfch: prefetch
- * @isic: initial-status interruption control
- * @alcc: address-limit checking control
- * @ssi: suppress-suspended interruption
- * @zcc: zero condition code
- * @ectl: extended control
- * @pno: path not operational
- * @res: reserved
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @cpa: channel program address
- * @dstat: device status
- * @cstat: subchannel status
- * @count: residual count
- */
-struct cmd_scsw {
-	__u32 key  : 4;
-	__u32 sctl : 1;
-	__u32 eswf : 1;
-	__u32 cc   : 2;
-	__u32 fmt  : 1;
-	__u32 pfch : 1;
-	__u32 isic : 1;
-	__u32 alcc : 1;
-	__u32 ssi  : 1;
-	__u32 zcc  : 1;
-	__u32 ectl : 1;
-	__u32 pno  : 1;
-	__u32 res  : 1;
-	__u32 fctl : 3;
-	__u32 actl : 7;
-	__u32 stctl : 5;
-	__u32 cpa;
-	__u32 dstat : 8;
-	__u32 cstat : 8;
-	__u32 count : 16;
-} __attribute__ ((packed));
-
-/**
- * struct tm_scsw - transport-mode subchannel status word
- * @key: subchannel key
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @x: IRB-format control
- * @q: interrogate-complete
- * @ectl: extended control
- * @pno: path not operational
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @tcw: TCW address
- * @dstat: device status
- * @cstat: subchannel status
- * @fcxs: FCX status
- * @schxs: subchannel-extended status
- */
-struct tm_scsw {
-	u32 key:4;
-	u32 :1;
-	u32 eswf:1;
-	u32 cc:2;
-	u32 fmt:3;
-	u32 x:1;
-	u32 q:1;
-	u32 :1;
-	u32 ectl:1;
-	u32 pno:1;
-	u32 :1;
-	u32 fctl:3;
-	u32 actl:7;
-	u32 stctl:5;
-	u32 tcw;
-	u32 dstat:8;
-	u32 cstat:8;
-	u32 fcxs:8;
-	u32 schxs:8;
-} __attribute__ ((packed));
-
-/**
- * union scsw - subchannel status word
- * @cmd: command-mode SCSW
- * @tm: transport-mode SCSW
- */
-union scsw {
-	struct cmd_scsw cmd;
-	struct tm_scsw tm;
-} __attribute__ ((packed));
-
-int scsw_is_tm(union scsw *scsw);
-u32 scsw_key(union scsw *scsw);
-u32 scsw_eswf(union scsw *scsw);
-u32 scsw_cc(union scsw *scsw);
-u32 scsw_ectl(union scsw *scsw);
-u32 scsw_pno(union scsw *scsw);
-u32 scsw_fctl(union scsw *scsw);
-u32 scsw_actl(union scsw *scsw);
-u32 scsw_stctl(union scsw *scsw);
-u32 scsw_dstat(union scsw *scsw);
-u32 scsw_cstat(union scsw *scsw);
-int scsw_is_solicited(union scsw *scsw);
-int scsw_is_valid_key(union scsw *scsw);
-int scsw_is_valid_eswf(union scsw *scsw);
-int scsw_is_valid_cc(union scsw *scsw);
-int scsw_is_valid_ectl(union scsw *scsw);
-int scsw_is_valid_pno(union scsw *scsw);
-int scsw_is_valid_fctl(union scsw *scsw);
-int scsw_is_valid_actl(union scsw *scsw);
-int scsw_is_valid_stctl(union scsw *scsw);
-int scsw_is_valid_dstat(union scsw *scsw);
-int scsw_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_valid_key(union scsw *scsw);
-int scsw_cmd_is_valid_sctl(union scsw *scsw);
-int scsw_cmd_is_valid_eswf(union scsw *scsw);
-int scsw_cmd_is_valid_cc(union scsw *scsw);
-int scsw_cmd_is_valid_fmt(union scsw *scsw);
-int scsw_cmd_is_valid_pfch(union scsw *scsw);
-int scsw_cmd_is_valid_isic(union scsw *scsw);
-int scsw_cmd_is_valid_alcc(union scsw *scsw);
-int scsw_cmd_is_valid_ssi(union scsw *scsw);
-int scsw_cmd_is_valid_zcc(union scsw *scsw);
-int scsw_cmd_is_valid_ectl(union scsw *scsw);
-int scsw_cmd_is_valid_pno(union scsw *scsw);
-int scsw_cmd_is_valid_fctl(union scsw *scsw);
-int scsw_cmd_is_valid_actl(union scsw *scsw);
-int scsw_cmd_is_valid_stctl(union scsw *scsw);
-int scsw_cmd_is_valid_dstat(union scsw *scsw);
-int scsw_cmd_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_solicited(union scsw *scsw);
-int scsw_tm_is_valid_key(union scsw *scsw);
-int scsw_tm_is_valid_eswf(union scsw *scsw);
-int scsw_tm_is_valid_cc(union scsw *scsw);
-int scsw_tm_is_valid_fmt(union scsw *scsw);
-int scsw_tm_is_valid_x(union scsw *scsw);
-int scsw_tm_is_valid_q(union scsw *scsw);
-int scsw_tm_is_valid_ectl(union scsw *scsw);
-int scsw_tm_is_valid_pno(union scsw *scsw);
-int scsw_tm_is_valid_fctl(union scsw *scsw);
-int scsw_tm_is_valid_actl(union scsw *scsw);
-int scsw_tm_is_valid_stctl(union scsw *scsw);
-int scsw_tm_is_valid_dstat(union scsw *scsw);
-int scsw_tm_is_valid_cstat(union scsw *scsw);
-int scsw_tm_is_valid_fcxs(union scsw *scsw);
-int scsw_tm_is_valid_schxs(union scsw *scsw);
-int scsw_tm_is_solicited(union scsw *scsw);
-
-#define SCSW_FCTL_CLEAR_FUNC	 0x1
-#define SCSW_FCTL_HALT_FUNC	 0x2
-#define SCSW_FCTL_START_FUNC	 0x4
-
-#define SCSW_ACTL_SUSPENDED	 0x1
-#define SCSW_ACTL_DEVACT	 0x2
-#define SCSW_ACTL_SCHACT	 0x4
-#define SCSW_ACTL_CLEAR_PEND	 0x8
-#define SCSW_ACTL_HALT_PEND	 0x10
-#define SCSW_ACTL_START_PEND	 0x20
-#define SCSW_ACTL_RESUME_PEND	 0x40
-
-#define SCSW_STCTL_STATUS_PEND	 0x1
-#define SCSW_STCTL_SEC_STATUS	 0x2
-#define SCSW_STCTL_PRIM_STATUS	 0x4
-#define SCSW_STCTL_INTER_STATUS	 0x8
-#define SCSW_STCTL_ALERT_STATUS	 0x10
-
-#define DEV_STAT_ATTENTION	 0x80
-#define DEV_STAT_STAT_MOD	 0x40
-#define DEV_STAT_CU_END		 0x20
-#define DEV_STAT_BUSY		 0x10
-#define DEV_STAT_CHN_END	 0x08
-#define DEV_STAT_DEV_END	 0x04
-#define DEV_STAT_UNIT_CHECK	 0x02
-#define DEV_STAT_UNIT_EXCEP	 0x01
-
-#define SCHN_STAT_PCI		 0x80
-#define SCHN_STAT_INCORR_LEN	 0x40
-#define SCHN_STAT_PROG_CHECK	 0x20
-#define SCHN_STAT_PROT_CHECK	 0x10
-#define SCHN_STAT_CHN_DATA_CHK	 0x08
-#define SCHN_STAT_CHN_CTRL_CHK	 0x04
-#define SCHN_STAT_INTF_CTRL_CHK	 0x02
-#define SCHN_STAT_CHAIN_CHECK	 0x01
-
-/*
- * architectured values for first sense byte
- */
-#define SNS0_CMD_REJECT		0x80
-#define SNS_CMD_REJECT		SNS0_CMD_REJEC
-#define SNS0_INTERVENTION_REQ	0x40
-#define SNS0_BUS_OUT_CHECK	0x20
-#define SNS0_EQUIPMENT_CHECK	0x10
-#define SNS0_DATA_CHECK		0x08
-#define SNS0_OVERRUN		0x04
-#define SNS0_INCOMPL_DOMAIN	0x01
-
-/*
- * architectured values for second sense byte
- */
-#define SNS1_PERM_ERR		0x80
-#define SNS1_INV_TRACK_FORMAT	0x40
-#define SNS1_EOC		0x20
-#define SNS1_MESSAGE_TO_OPER	0x10
-#define SNS1_NO_REC_FOUND	0x08
-#define SNS1_FILE_PROTECTED	0x04
-#define SNS1_WRITE_INHIBITED	0x02
-#define SNS1_INPRECISE_END	0x01
-
-/*
- * architectured values for third sense byte
- */
-#define SNS2_REQ_INH_WRITE	0x80
-#define SNS2_CORRECTABLE	0x40
-#define SNS2_FIRST_LOG_ERR	0x20
-#define SNS2_ENV_DATA_PRESENT	0x10
-#define SNS2_INPRECISE_END	0x04
+#include <asm/scsw.h>
 
 /**
  * struct ccw1 - channel command word
diff --git a/arch/s390/include/asm/scsw.h b/arch/s390/include/asm/scsw.h
new file mode 100644
index 00000000000..de389cb54d2
--- /dev/null
+++ b/arch/s390/include/asm/scsw.h
@@ -0,0 +1,956 @@
+/*
+ *  Helper functions for scsw access.
+ *
+ *    Copyright IBM Corp. 2008,2009
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_SCSW_H_
+#define _ASM_S390_SCSW_H_
+
+#include <linux/types.h>
+#include <asm/chsc.h>
+#include <asm/cio.h>
+
+/**
+ * struct cmd_scsw - command-mode subchannel status word
+ * @key: subchannel key
+ * @sctl: suspend control
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @pfch: prefetch
+ * @isic: initial-status interruption control
+ * @alcc: address-limit checking control
+ * @ssi: suppress-suspended interruption
+ * @zcc: zero condition code
+ * @ectl: extended control
+ * @pno: path not operational
+ * @res: reserved
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @cpa: channel program address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @count: residual count
+ */
+struct cmd_scsw {
+	__u32 key  : 4;
+	__u32 sctl : 1;
+	__u32 eswf : 1;
+	__u32 cc   : 2;
+	__u32 fmt  : 1;
+	__u32 pfch : 1;
+	__u32 isic : 1;
+	__u32 alcc : 1;
+	__u32 ssi  : 1;
+	__u32 zcc  : 1;
+	__u32 ectl : 1;
+	__u32 pno  : 1;
+	__u32 res  : 1;
+	__u32 fctl : 3;
+	__u32 actl : 7;
+	__u32 stctl : 5;
+	__u32 cpa;
+	__u32 dstat : 8;
+	__u32 cstat : 8;
+	__u32 count : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct tm_scsw - transport-mode subchannel status word
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @x: IRB-format control
+ * @q: interrogate-complete
+ * @ectl: extended control
+ * @pno: path not operational
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @tcw: TCW address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @fcxs: FCX status
+ * @schxs: subchannel-extended status
+ */
+struct tm_scsw {
+	u32 key:4;
+	u32 :1;
+	u32 eswf:1;
+	u32 cc:2;
+	u32 fmt:3;
+	u32 x:1;
+	u32 q:1;
+	u32 :1;
+	u32 ectl:1;
+	u32 pno:1;
+	u32 :1;
+	u32 fctl:3;
+	u32 actl:7;
+	u32 stctl:5;
+	u32 tcw;
+	u32 dstat:8;
+	u32 cstat:8;
+	u32 fcxs:8;
+	u32 schxs:8;
+} __attribute__ ((packed));
+
+/**
+ * union scsw - subchannel status word
+ * @cmd: command-mode SCSW
+ * @tm: transport-mode SCSW
+ */
+union scsw {
+	struct cmd_scsw cmd;
+	struct tm_scsw tm;
+} __attribute__ ((packed));
+
+#define SCSW_FCTL_CLEAR_FUNC	 0x1
+#define SCSW_FCTL_HALT_FUNC	 0x2
+#define SCSW_FCTL_START_FUNC	 0x4
+
+#define SCSW_ACTL_SUSPENDED	 0x1
+#define SCSW_ACTL_DEVACT	 0x2
+#define SCSW_ACTL_SCHACT	 0x4
+#define SCSW_ACTL_CLEAR_PEND	 0x8
+#define SCSW_ACTL_HALT_PEND	 0x10
+#define SCSW_ACTL_START_PEND	 0x20
+#define SCSW_ACTL_RESUME_PEND	 0x40
+
+#define SCSW_STCTL_STATUS_PEND	 0x1
+#define SCSW_STCTL_SEC_STATUS	 0x2
+#define SCSW_STCTL_PRIM_STATUS	 0x4
+#define SCSW_STCTL_INTER_STATUS	 0x8
+#define SCSW_STCTL_ALERT_STATUS	 0x10
+
+#define DEV_STAT_ATTENTION	 0x80
+#define DEV_STAT_STAT_MOD	 0x40
+#define DEV_STAT_CU_END		 0x20
+#define DEV_STAT_BUSY		 0x10
+#define DEV_STAT_CHN_END	 0x08
+#define DEV_STAT_DEV_END	 0x04
+#define DEV_STAT_UNIT_CHECK	 0x02
+#define DEV_STAT_UNIT_EXCEP	 0x01
+
+#define SCHN_STAT_PCI		 0x80
+#define SCHN_STAT_INCORR_LEN	 0x40
+#define SCHN_STAT_PROG_CHECK	 0x20
+#define SCHN_STAT_PROT_CHECK	 0x10
+#define SCHN_STAT_CHN_DATA_CHK	 0x08
+#define SCHN_STAT_CHN_CTRL_CHK	 0x04
+#define SCHN_STAT_INTF_CTRL_CHK	 0x02
+#define SCHN_STAT_CHAIN_CHECK	 0x01
+
+/*
+ * architectured values for first sense byte
+ */
+#define SNS0_CMD_REJECT		0x80
+#define SNS_CMD_REJECT		SNS0_CMD_REJEC
+#define SNS0_INTERVENTION_REQ	0x40
+#define SNS0_BUS_OUT_CHECK	0x20
+#define SNS0_EQUIPMENT_CHECK	0x10
+#define SNS0_DATA_CHECK		0x08
+#define SNS0_OVERRUN		0x04
+#define SNS0_INCOMPL_DOMAIN	0x01
+
+/*
+ * architectured values for second sense byte
+ */
+#define SNS1_PERM_ERR		0x80
+#define SNS1_INV_TRACK_FORMAT	0x40
+#define SNS1_EOC		0x20
+#define SNS1_MESSAGE_TO_OPER	0x10
+#define SNS1_NO_REC_FOUND	0x08
+#define SNS1_FILE_PROTECTED	0x04
+#define SNS1_WRITE_INHIBITED	0x02
+#define SNS1_INPRECISE_END	0x01
+
+/*
+ * architectured values for third sense byte
+ */
+#define SNS2_REQ_INH_WRITE	0x80
+#define SNS2_CORRECTABLE	0x40
+#define SNS2_FIRST_LOG_ERR	0x20
+#define SNS2_ENV_DATA_PRESENT	0x10
+#define SNS2_INPRECISE_END	0x04
+
+/**
+ * scsw_is_tm - check for transport mode scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the specified scsw is a transport mode scsw, zero
+ * otherwise.
+ */
+static inline int scsw_is_tm(union scsw *scsw)
+{
+	return css_general_characteristics.fcx && (scsw->tm.x == 1);
+}
+
+/**
+ * scsw_key - return scsw key field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the key field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_key(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.key;
+	else
+		return scsw->cmd.key;
+}
+
+/**
+ * scsw_eswf - return scsw eswf field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the eswf field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_eswf(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.eswf;
+	else
+		return scsw->cmd.eswf;
+}
+
+/**
+ * scsw_cc - return scsw cc field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the cc field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_cc(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.cc;
+	else
+		return scsw->cmd.cc;
+}
+
+/**
+ * scsw_ectl - return scsw ectl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the ectl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_ectl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.ectl;
+	else
+		return scsw->cmd.ectl;
+}
+
+/**
+ * scsw_pno - return scsw pno field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the pno field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_pno(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.pno;
+	else
+		return scsw->cmd.pno;
+}
+
+/**
+ * scsw_fctl - return scsw fctl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the fctl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_fctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.fctl;
+	else
+		return scsw->cmd.fctl;
+}
+
+/**
+ * scsw_actl - return scsw actl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the actl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_actl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.actl;
+	else
+		return scsw->cmd.actl;
+}
+
+/**
+ * scsw_stctl - return scsw stctl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the stctl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_stctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.stctl;
+	else
+		return scsw->cmd.stctl;
+}
+
+/**
+ * scsw_dstat - return scsw dstat field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the dstat field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_dstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.dstat;
+	else
+		return scsw->cmd.dstat;
+}
+
+/**
+ * scsw_cstat - return scsw cstat field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the cstat field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_cstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.cstat;
+	else
+		return scsw->cmd.cstat;
+}
+
+/**
+ * scsw_cmd_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_key(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_sctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_sctl(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_eswf(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_cmd_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_cc(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_cmd_is_valid_fmt - check fmt field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fmt field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_fmt(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_pfch - check pfch field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pfch field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_pfch(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_isic - check isic field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the isic field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_isic(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_alcc - check alcc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the alcc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_alcc(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_ssi - check ssi field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ssi field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_ssi(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_zcc - check zcc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the zcc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_zcc(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS);
+}
+
+/**
+ * scsw_cmd_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_ectl(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       !(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_ALERT_STATUS);
+}
+
+/**
+ * scsw_cmd_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_pno(union scsw *scsw)
+{
+	return (scsw->cmd.fctl != 0) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (!(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) ||
+		 ((scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
+		  (scsw->cmd.actl & SCSW_ACTL_SUSPENDED)));
+}
+
+/**
+ * scsw_cmd_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_fctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_actl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_stctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_dstat(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->cmd.cc != 3);
+}
+
+/**
+ * scsw_cmd_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_cstat(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->cmd.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_key(union scsw *scsw)
+{
+	return (scsw->tm.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_tm_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_eswf(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_tm_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_cc(union scsw *scsw)
+{
+	return (scsw->tm.fctl & SCSW_FCTL_START_FUNC) &&
+	       (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_tm_is_valid_fmt - check fmt field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fmt field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fmt(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_x - check x field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the x field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_x(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_q - check q field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the q field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_q(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_ectl(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       !(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
+	       (scsw->tm.stctl & SCSW_STCTL_ALERT_STATUS);
+}
+
+/**
+ * scsw_tm_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_pno(union scsw *scsw)
+{
+	return (scsw->tm.fctl != 0) &&
+	       (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (!(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) ||
+		 ((scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
+		  (scsw->tm.actl & SCSW_ACTL_SUSPENDED)));
+}
+
+/**
+ * scsw_tm_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_actl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_stctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_dstat(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->tm.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_cstat(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->tm.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_fcxs - check fcxs field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fcxs field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fcxs(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_schxs - check schxs field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the schxs field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_schxs(union scsw *scsw)
+{
+	return (scsw->tm.cstat & (SCHN_STAT_PROG_CHECK |
+				  SCHN_STAT_INTF_CTRL_CHK |
+				  SCHN_STAT_PROT_CHECK |
+				  SCHN_STAT_CHN_DATA_CHK));
+}
+
+/**
+ * scsw_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_actl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_actl(scsw);
+	else
+		return scsw_cmd_is_valid_actl(scsw);
+}
+
+/**
+ * scsw_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_cc(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_cc(scsw);
+	else
+		return scsw_cmd_is_valid_cc(scsw);
+}
+
+/**
+ * scsw_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_cstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_cstat(scsw);
+	else
+		return scsw_cmd_is_valid_cstat(scsw);
+}
+
+/**
+ * scsw_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_dstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_dstat(scsw);
+	else
+		return scsw_cmd_is_valid_dstat(scsw);
+}
+
+/**
+ * scsw_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_ectl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_ectl(scsw);
+	else
+		return scsw_cmd_is_valid_ectl(scsw);
+}
+
+/**
+ * scsw_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_eswf(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_eswf(scsw);
+	else
+		return scsw_cmd_is_valid_eswf(scsw);
+}
+
+/**
+ * scsw_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_fctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_fctl(scsw);
+	else
+		return scsw_cmd_is_valid_fctl(scsw);
+}
+
+/**
+ * scsw_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_key(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_key(scsw);
+	else
+		return scsw_cmd_is_valid_key(scsw);
+}
+
+/**
+ * scsw_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_pno(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_pno(scsw);
+	else
+		return scsw_cmd_is_valid_pno(scsw);
+}
+
+/**
+ * scsw_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_stctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_stctl(scsw);
+	else
+		return scsw_cmd_is_valid_stctl(scsw);
+}
+
+/**
+ * scsw_cmd_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the command mode scsw indicates that the associated
+ * status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_cmd_is_solicited(union scsw *scsw)
+{
+	return (scsw->cmd.cc != 0) || (scsw->cmd.stctl !=
+		(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
+}
+
+/**
+ * scsw_tm_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the transport mode scsw indicates that the associated
+ * status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_tm_is_solicited(union scsw *scsw)
+{
+	return (scsw->tm.cc != 0) || (scsw->tm.stctl !=
+		(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
+}
+
+/**
+ * scsw_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the transport or command mode scsw indicates that the
+ * associated status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_is_solicited(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_solicited(scsw);
+	else
+		return scsw_cmd_is_solicited(scsw);
+}
+
+#endif /* _ASM_S390_SCSW_H_ */
-- 
cgit v1.2.3


From 05e7ff7da78bad3edc1290ed86b4a37da72ced62 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:31 +0200
Subject: [S390] introduce get_clock_monotonic

Introduce get_clock_monotonic() function which can be used to get a
(fast) timestamp. Resolution is the same as for get_clock(). The
only difference is that the timestamps are monotonic and don't jump
backward or forward.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/timex.h | 14 ++++++++++++++
 arch/s390/kernel/time.c       |  3 ++-
 2 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index cc21e3e20fd..24aa1cda20a 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -90,4 +90,18 @@ unsigned long long monotonic_clock(void);
 
 extern u64 sched_clock_base_cc;
 
+/**
+ * get_clock_monotonic - returns current time in clock rate units
+ *
+ * The caller must ensure that preemption is disabled.
+ * The clock and sched_clock_base get changed via stop_machine.
+ * Therefore preemption must be disabled when calling this
+ * function, otherwise the returned value is not guaranteed to
+ * be monotonic.
+ */
+static inline unsigned long long get_clock_monotonic(void)
+{
+	return get_clock_xt() - sched_clock_base_cc;
+}
+
 #endif
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d4c8e9c47c8..54e327e9af0 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -60,6 +60,7 @@
 #define TICK_SIZE tick
 
 u64 sched_clock_base_cc = -1;	/* Force to data section. */
+EXPORT_SYMBOL_GPL(sched_clock_base_cc);
 
 static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
@@ -68,7 +69,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
  */
 unsigned long long notrace sched_clock(void)
 {
-	return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
+	return (get_clock_monotonic() * 125) >> 9;
 }
 
 /*
-- 
cgit v1.2.3


From 04efc3be767cfed0d348fd598eba8fe5f5bf5fe6 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:32 +0200
Subject: [S390] convert/optimize csum_fold() to C

In the meantime gcc generates better code than the old inline
assemblies do. Original inline assembly results in:

lr	%r1,%r2
sr	%r3,%r3
lr	%r2,%r1
srdl	%r2,16
alr	%r2,%r3
alr	%r1,%r2
srl	%r1,16
xilf	%r1,65535
llghr	%r2,%r1
br	%r14

Out of the C code gcc generates this:

rll	%r1,%r2,16
ar	%r1,%r2
srl	%r1,16
xilf	%r1,65535
llghr	%r2,%r1
br	%r14

In addition we don't have any static register allocations anymore and
gcc is free to shuffle instructions around for better pipeline usage.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/checksum.h | 25 ++++---------------------
 1 file changed, 4 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h
index d5a8e7c1477..6c00f6800a3 100644
--- a/arch/s390/include/asm/checksum.h
+++ b/arch/s390/include/asm/checksum.h
@@ -78,28 +78,11 @@ csum_partial_copy_nocheck (const void *src, void *dst, int len, __wsum sum)
  */
 static inline __sum16 csum_fold(__wsum sum)
 {
-#ifndef __s390x__
-	register_pair rp;
+	u32 csum = (__force u32) sum;
 
-	asm volatile(
-		"	slr	%N1,%N1\n"	/* %0 = H L */
-		"	lr	%1,%0\n"	/* %0 = H L, %1 = H L 0 0 */
-		"	srdl	%1,16\n"	/* %0 = H L, %1 = 0 H L 0 */
-		"	alr	%1,%N1\n"	/* %0 = H L, %1 = L H L 0 */
-		"	alr	%0,%1\n"	/* %0 = H+L+C L+H */
-		"	srl	%0,16\n"	/* %0 = H+L+C */
-		: "+&d" (sum), "=d" (rp) : : "cc");
-#else /* __s390x__ */
-	asm volatile(
-		"	sr	3,3\n"		/* %0 = H*65536 + L */
-		"	lr	2,%0\n"		/* %0 = H L, 2/3 = H L / 0 0 */
-		"	srdl	2,16\n"		/* %0 = H L, 2/3 = 0 H / L 0 */
-		"	alr	2,3\n"		/* %0 = H L, 2/3 = L H / L 0 */
-		"	alr	%0,2\n"		/* %0 = H+L+C L+H */
-		"	srl	%0,16\n"	/* %0 = H+L+C */
-		: "+&d" (sum) : : "cc", "2", "3");
-#endif /* __s390x__ */
-	return (__force __sum16) ~sum;
+	csum += (csum >> 16) + (csum << 16);
+	csum >>= 16;
+	return (__force __sum16) ~csum;
 }
 
 /*
-- 
cgit v1.2.3


From 6ac2a4ddd10d6916785b4c566d521025c855f823 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:33 +0200
Subject: [S390] improve mcount code

Move the 64 bit mount code from mcount.S into mcount64.S and avoid
code duplication.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/Makefile   |   2 +-
 arch/s390/kernel/mcount.S   | 147 +++-----------------------------------------
 arch/s390/kernel/mcount64.S |  78 +++++++++++++++++++++++
 3 files changed, 89 insertions(+), 138 deletions(-)
 create mode 100644 arch/s390/kernel/mcount64.S

(limited to 'arch')

diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index c75ed43b1a1..794955305f3 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
 
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
+obj-$(CONFIG_FUNCTION_TRACER)	+= $(if $(CONFIG_64BIT),mcount64.o,mcount.o)
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 2a0a5e97ba8..dfe015d7398 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -11,111 +11,27 @@
 ftrace_stub:
 	br	%r14
 
-#ifdef CONFIG_64BIT
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
 	.globl _mcount
 _mcount:
-	br	%r14
-
-	.globl ftrace_caller
-ftrace_caller:
-	larl	%r1,function_trace_stop
-	icm	%r1,0xf,0(%r1)
-	bnzr	%r14
-	stmg	%r2,%r5,32(%r15)
-	stg	%r14,112(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-160
-	stg	%r1,__SF_BACKCHAIN(%r15)
-	lgr	%r2,%r14
-	lg	%r3,168(%r15)
-	larl	%r14,ftrace_dyn_func
-	lg	%r14,0(%r14)
-	basr	%r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	.globl	ftrace_graph_caller
-ftrace_graph_caller:
-	# This unconditional branch gets runtime patched. Change only if
-	# you know what you are doing. See ftrace_enable_graph_caller().
-	j	0f
-	lg	%r2,272(%r15)
-	lg	%r3,168(%r15)
-	brasl	%r14,prepare_ftrace_return
-	stg	%r2,168(%r15)
-0:
-#endif
-	aghi	%r15,160
-	lmg	%r2,%r5,32(%r15)
-	lg	%r14,112(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
 	br	%r14
 
 	.data
 	.globl	ftrace_dyn_func
 ftrace_dyn_func:
-	.quad	ftrace_stub
+	.long	ftrace_stub
 	.previous
 
-#else /* CONFIG_DYNAMIC_FTRACE */
-
-	.globl _mcount
-_mcount:
-	larl	%r1,function_trace_stop
-	icm	%r1,0xf,0(%r1)
-	bnzr	%r14
-	stmg	%r2,%r5,32(%r15)
-	stg	%r14,112(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-160
-	stg	%r1,__SF_BACKCHAIN(%r15)
-	lgr	%r2,%r14
-	lg	%r3,168(%r15)
-	larl	%r14,ftrace_trace_function
-	lg	%r14,0(%r14)
-	basr	%r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	lg	%r2,272(%r15)
-	lg	%r3,168(%r15)
-	brasl	%r14,prepare_ftrace_return
-	stg	%r2,168(%r15)
-#endif
-	aghi	%r15,160
-	lmg	%r2,%r5,32(%r15)
-	lg	%r14,112(%r15)
-	br	%r14
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
-	.globl	return_to_handler
-return_to_handler:
-	stmg	%r2,%r5,32(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-160
-	stg	%r1,__SF_BACKCHAIN(%r15)
-	brasl	%r14,ftrace_return_to_handler
-	aghi	%r15,160
-	lgr	%r14,%r2
-	lmg	%r2,%r5,32(%r15)
-	br	%r14
-
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#else /* CONFIG_64BIT */
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-	.globl _mcount
-_mcount:
-	br	%r14
-
 	.globl ftrace_caller
 ftrace_caller:
+#endif
 	stm	%r2,%r5,16(%r15)
 	bras	%r1,2f
+#ifdef CONFIG_DYNAMIC_FTRACE
+0:	.long	ftrace_dyn_func
+#else
 0:	.long	ftrace_trace_function
+#endif
 1:	.long	function_trace_stop
 2:	l	%r2,1b-0b(%r1)
 	icm	%r2,0xf,0(%r2)
@@ -131,53 +47,13 @@ ftrace_caller:
 	l	%r14,0(%r14)
 	basr	%r14,%r14
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
 	.globl	ftrace_graph_caller
 ftrace_graph_caller:
 	# This unconditional branch gets runtime patched. Change only if
 	# you know what you are doing. See ftrace_enable_graph_caller().
 	j	1f
-	bras	%r1,0f
-	.long	prepare_ftrace_return
-0:	l	%r2,152(%r15)
-	l	%r4,0(%r1)
-	l	%r3,100(%r15)
-	basr	%r14,%r4
-	st	%r2,100(%r15)
-1:
 #endif
-	ahi	%r15,96
-	l	%r14,56(%r15)
-3:	lm	%r2,%r5,16(%r15)
-	br	%r14
-
-	.data
-	.globl	ftrace_dyn_func
-ftrace_dyn_func:
-	.long	ftrace_stub
-	.previous
-
-#else /* CONFIG_DYNAMIC_FTRACE */
-
-	.globl _mcount
-_mcount:
-	stm	%r2,%r5,16(%r15)
-	bras	%r1,2f
-0:	.long	ftrace_trace_function
-1:	.long	function_trace_stop
-2:	l	%r2,1b-0b(%r1)
-	icm	%r2,0xf,0(%r2)
-	jnz	3f
-	st	%r14,56(%r15)
-	lr	%r0,%r15
-	ahi	%r15,-96
-	l	%r3,100(%r15)
-	la	%r2,0(%r14)
-	st	%r0,__SF_BACKCHAIN(%r15)
-	la	%r3,0(%r3)
-	l	%r14,0b-0b(%r1)
-	l	%r14,0(%r14)
-	basr	%r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	bras	%r1,0f
 	.long	prepare_ftrace_return
 0:	l	%r2,152(%r15)
@@ -185,14 +61,13 @@ _mcount:
 	l	%r3,100(%r15)
 	basr	%r14,%r4
 	st	%r2,100(%r15)
+1:
 #endif
 	ahi	%r15,96
 	l	%r14,56(%r15)
 3:	lm	%r2,%r5,16(%r15)
 	br	%r14
 
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 	.globl	return_to_handler
@@ -211,6 +86,4 @@ return_to_handler:
 	lm	%r2,%r5,16(%r15)
 	br	%r14
 
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#endif /* CONFIG_64BIT */
+#endif
diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S
new file mode 100644
index 00000000000..c37211c6092
--- /dev/null
+++ b/arch/s390/kernel/mcount64.S
@@ -0,0 +1,78 @@
+/*
+ * Copyright IBM Corp. 2008,2009
+ *
+ *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <asm/asm-offsets.h>
+
+	.globl ftrace_stub
+ftrace_stub:
+	br	%r14
+
+	.globl _mcount
+_mcount:
+#ifdef CONFIG_DYNAMIC_FTRACE
+	br	%r14
+
+	.data
+	.globl	ftrace_dyn_func
+ftrace_dyn_func:
+	.quad	ftrace_stub
+	.previous
+
+	.globl ftrace_caller
+ftrace_caller:
+#endif
+	larl	%r1,function_trace_stop
+	icm	%r1,0xf,0(%r1)
+	bnzr	%r14
+	stmg	%r2,%r5,32(%r15)
+	stg	%r14,112(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	lgr	%r2,%r14
+	lg	%r3,168(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
+	larl	%r14,ftrace_dyn_func
+#else
+	larl	%r14,ftrace_trace_function
+#endif
+	lg	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	# This unconditional branch gets runtime patched. Change only if
+	# you know what you are doing. See ftrace_enable_graph_caller().
+	j	0f
+#endif
+	lg	%r2,272(%r15)
+	lg	%r3,168(%r15)
+	brasl	%r14,prepare_ftrace_return
+	stg	%r2,168(%r15)
+0:
+#endif
+	aghi	%r15,160
+	lmg	%r2,%r5,32(%r15)
+	lg	%r14,112(%r15)
+	br	%r14
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+	.globl	return_to_handler
+return_to_handler:
+	stmg	%r2,%r5,32(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	brasl	%r14,ftrace_return_to_handler
+	aghi	%r15,160
+	lgr	%r14,%r2
+	lmg	%r2,%r5,32(%r15)
+	br	%r14
+
+#endif
-- 
cgit v1.2.3


From 12751058515860ed43c8f874ebcb2097b323736a Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:34 +0200
Subject: [S390] atomic ops: add effecient atomic64 support for 31 bit

Use compare double and swap to implement efficient atomic64 ops for 31 bit.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig              |   1 -
 arch/s390/include/asm/atomic.h | 164 +++++++++++++++++++++++++++++++----------
 2 files changed, 127 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ae5d72f47e..47836b945d0 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,7 +95,6 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_COUNTERS
-	select GENERIC_ATOMIC64 if !64BIT
 
 config SCHED_OMIT_FRAME_POINTER
 	bool
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index c7d0abfb0f0..b491d5e963c 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -1,28 +1,20 @@
 #ifndef __ARCH_S390_ATOMIC__
 #define __ARCH_S390_ATOMIC__
 
-#include <linux/compiler.h>
-#include <linux/types.h>
-
 /*
- *  include/asm-s390/atomic.h
+ * Copyright 1999,2009 IBM Corp.
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *	      Denis Joseph Barrow,
+ *	      Arnd Bergmann <arndb@de.ibm.com>,
  *
- *  S390 version
- *    Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Denis Joseph Barrow,
- *		 Arnd Bergmann (arndb@de.ibm.com)
- *
- *  Derived from "include/asm-i386/bitops.h"
- *    Copyright (C) 1992, Linus Torvalds
+ * Atomic operations that C can't guarantee us.
+ * Useful for resource counting etc.
+ * s390 uses 'Compare And Swap' for atomicity in SMP enviroment.
  *
  */
 
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
- */
+#include <linux/compiler.h>
+#include <linux/types.h>
 
 #define ATOMIC_INIT(i)  { (i) }
 
@@ -146,9 +138,10 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 
 #undef __CS_LOOP
 
-#ifdef __s390x__
 #define ATOMIC64_INIT(i)  { (i) }
 
+#ifdef CONFIG_64BIT
+
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 
 #define __CSG_LOOP(ptr, op_val, op_string) ({				\
@@ -202,21 +195,11 @@ static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
 {
 	return __CSG_LOOP(v, i, "agr");
 }
-#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
-#define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
-#define atomic64_inc(_v)		atomic64_add_return(1, _v)
-#define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
-#define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
 
 static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
 {
 	return __CSG_LOOP(v, i, "sgr");
 }
-#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
-#define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
-#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
-#define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
-#define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
 
 static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
 {
@@ -249,6 +232,111 @@ static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
 	return old;
 }
 
+#undef __CSG_LOOP
+
+#else /* CONFIG_64BIT */
+
+typedef struct {
+	long long counter;
+} atomic64_t;
+
+static inline long long atomic64_read(const atomic64_t *v)
+{
+	register_pair rp;
+
+	asm volatile(
+		"	lm	%0,%N0,0(%1)"
+		: "=&d" (rp)
+		: "a" (&v->counter), "m" (v->counter)
+		);
+	return rp.pair;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	register_pair rp = {.pair = i};
+
+	asm volatile(
+		"	stm	%1,%N1,0(%2)"
+		: "=m" (v->counter)
+		: "d" (rp), "a" (&v->counter)
+		);
+}
+
+static inline long long atomic64_xchg(atomic64_t *v, long long new)
+{
+	register_pair rp_new = {.pair = new};
+	register_pair rp_old;
+
+	asm volatile(
+		"	lm	%0,%N0,0(%2)\n"
+		"0:	cds	%0,%3,0(%2)\n"
+		"	jl	0b\n"
+		: "=&d" (rp_old), "+m" (v->counter)
+		: "a" (&v->counter), "d" (rp_new)
+		: "cc");
+	return rp_old.pair;
+}
+
+static inline long long atomic64_cmpxchg(atomic64_t *v,
+					 long long old, long long new)
+{
+	register_pair rp_old = {.pair = old};
+	register_pair rp_new = {.pair = new};
+
+	asm volatile(
+		"	cds	%0,%3,0(%2)"
+		: "+&d" (rp_old), "+m" (v->counter)
+		: "a" (&v->counter), "d" (rp_new)
+		: "cc");
+	return rp_old.pair;
+}
+
+
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old + i;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+	return new;
+}
+
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old - i;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+	return new;
+}
+
+static inline void atomic64_set_mask(unsigned long long mask, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old | mask;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old & mask;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+#endif /* CONFIG_64BIT */
+
 static __inline__ int atomic64_add_unless(atomic64_t *v,
 					  long long a, long long u)
 {
@@ -265,15 +353,17 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 	return c != u;
 }
 
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#undef __CSG_LOOP
-
-#else /* __s390x__ */
-
-#include <asm-generic/atomic64.h>
-
-#endif /* __s390x__ */
+#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
+#define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
+#define atomic64_inc(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
+#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
+#define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
+#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1, 0)
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
-- 
cgit v1.2.3


From bfe3349b516df011dcf6462b0fd748a6f5c2e8af Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:35 +0200
Subject: [S390] atomic ops: small cleanups

Couple of coding style fixes, replace __inline__ with inline and
remove #ifdef __KERNEL_- since the header file isn't exported.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/atomic.h | 41 +++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index b491d5e963c..ae7c8f9f94a 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -18,8 +18,6 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#ifdef __KERNEL__
-
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 
 #define __CS_LOOP(ptr, op_val, op_string) ({				\
@@ -69,7 +67,7 @@ static inline void atomic_set(atomic_t *v, int i)
 	barrier();
 }
 
-static __inline__ int atomic_add_return(int i, atomic_t * v)
+static inline int atomic_add_return(int i, atomic_t *v)
 {
 	return __CS_LOOP(v, i, "ar");
 }
@@ -79,7 +77,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 #define atomic_inc_return(_v)		atomic_add_return(1, _v)
 #define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
 
-static __inline__ int atomic_sub_return(int i, atomic_t * v)
+static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	return __CS_LOOP(v, i, "sr");
 }
@@ -89,19 +87,19 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 #define atomic_dec_return(_v)		atomic_sub_return(1, _v)
 #define atomic_dec_and_test(_v)		(atomic_sub_return(1, _v) == 0)
 
-static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_clear_mask(unsigned long mask, atomic_t *v)
 {
-	       __CS_LOOP(v, ~mask, "nr");
+	__CS_LOOP(v, ~mask, "nr");
 }
 
-static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_set_mask(unsigned long mask, atomic_t *v)
 {
-	       __CS_LOOP(v, mask, "or");
+	__CS_LOOP(v, mask, "or");
 }
 
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
 
-static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 	asm volatile(
@@ -119,7 +117,7 @@ static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
 	return old;
 }
 
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
 {
 	int c, old;
 	c = atomic_read(v);
@@ -155,7 +153,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 		: "=&d" (old_val), "=&d" (new_val),			\
 		  "=Q" (((atomic_t *)(ptr))->counter)			\
 		: "d" (op_val),	"Q" (((atomic_t *)(ptr))->counter)	\
-		: "cc", "memory" );					\
+		: "cc", "memory");					\
 	new_val;							\
 })
 
@@ -173,7 +171,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 		  "=m" (((atomic_t *)(ptr))->counter)			\
 		: "a" (ptr), "d" (op_val),				\
 		  "m" (((atomic_t *)(ptr))->counter)			\
-		: "cc", "memory" );					\
+		: "cc", "memory");					\
 	new_val;							\
 })
 
@@ -191,29 +189,29 @@ static inline void atomic64_set(atomic64_t *v, long long i)
 	barrier();
 }
 
-static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
 {
 	return __CSG_LOOP(v, i, "agr");
 }
 
-static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
 {
 	return __CSG_LOOP(v, i, "sgr");
 }
 
-static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_clear_mask(unsigned long mask, atomic64_t *v)
 {
-	       __CSG_LOOP(v, ~mask, "ngr");
+	__CSG_LOOP(v, ~mask, "ngr");
 }
 
-static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v)
 {
-	       __CSG_LOOP(v, mask, "ogr");
+	__CSG_LOOP(v, mask, "ogr");
 }
 
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
 
-static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
+static inline long long atomic64_cmpxchg(atomic64_t *v,
 					     long long old, long long new)
 {
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
@@ -337,8 +335,7 @@ static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
 
 #endif /* CONFIG_64BIT */
 
-static __inline__ int atomic64_add_unless(atomic64_t *v,
-					  long long a, long long u)
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
 	long long c, old;
 	c = atomic64_read(v);
@@ -371,5 +368,5 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 #define smp_mb__after_atomic_inc()	smp_mb()
 
 #include <asm-generic/atomic-long.h>
-#endif /* __KERNEL__ */
+
 #endif /* __ARCH_S390_ATOMIC__  */
-- 
cgit v1.2.3


From f3d1263e81daf2be1353baf1ad3f6e25d135f2c5 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:36 +0200
Subject: [S390] hibernation: remove dead file

There is no caller of do_after_copyback() anywhere. Remove it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/power/Makefile    |  1 -
 arch/s390/power/swsusp_64.c | 17 -----------------
 2 files changed, 18 deletions(-)
 delete mode 100644 arch/s390/power/swsusp_64.c

(limited to 'arch')

diff --git a/arch/s390/power/Makefile b/arch/s390/power/Makefile
index 973bb45a8fe..ee2f279beff 100644
--- a/arch/s390/power/Makefile
+++ b/arch/s390/power/Makefile
@@ -4,5 +4,4 @@
 
 obj-$(CONFIG_HIBERNATION) += suspend.o
 obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_HIBERNATION) += swsusp_64.o
 obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
diff --git a/arch/s390/power/swsusp_64.c b/arch/s390/power/swsusp_64.c
deleted file mode 100644
index 9516a517d72..00000000000
--- a/arch/s390/power/swsusp_64.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-#include <asm/system.h>
-#include <linux/interrupt.h>
-
-void do_after_copyback(void)
-{
-	mb();
-}
-
-- 
cgit v1.2.3


From c48ff644f2c86f34f69f382b68b16c6d30854783 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:37 +0200
Subject: [S390] hibernation: merge files and move to kernel/

Merge the nearly empty C files and move everything from power/ to
kernel/. That way the files are easier to handle.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Makefile              |   3 +-
 arch/s390/kernel/Makefile       |   2 +-
 arch/s390/kernel/suspend.c      |  73 ++++++++++++++++
 arch/s390/kernel/swsusp_asm64.S | 184 ++++++++++++++++++++++++++++++++++++++++
 arch/s390/power/Makefile        |   7 --
 arch/s390/power/suspend.c       |  40 ---------
 arch/s390/power/swsusp.c        |  42 ---------
 arch/s390/power/swsusp_asm64.S  | 184 ----------------------------------------
 8 files changed, 259 insertions(+), 276 deletions(-)
 create mode 100644 arch/s390/kernel/suspend.c
 create mode 100644 arch/s390/kernel/swsusp_asm64.S
 delete mode 100644 arch/s390/power/Makefile
 delete mode 100644 arch/s390/power/suspend.c
 delete mode 100644 arch/s390/power/swsusp.c
 delete mode 100644 arch/s390/power/swsusp_asm64.S

(limited to 'arch')

diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 0ff387cebf8..fc8fb20e7fc 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -88,8 +88,7 @@ LDFLAGS_vmlinux := -e start
 head-y		:= arch/s390/kernel/head.o arch/s390/kernel/init_task.o
 
 core-y		+= arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
-		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ \
-		   arch/s390/power/
+		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
 
 libs-y		+= arch/s390/lib/
 drivers-y	+= drivers/s390/
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 794955305f3..c7be8e10b87 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -32,7 +32,7 @@ extra-y				+= head.o init_task.o vmlinux.lds
 
 obj-$(CONFIG_MODULES)		+= s390_ksyms.o module.o
 obj-$(CONFIG_SMP)		+= smp.o topology.o
-
+obj-$(CONFIG_HIBERNATION)	+= suspend.o swsusp_asm64.o
 obj-$(CONFIG_AUDIT)		+= audit.o
 compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
 obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
new file mode 100644
index 00000000000..086bee970ca
--- /dev/null
+++ b/arch/s390/kernel/suspend.c
@@ -0,0 +1,73 @@
+/*
+ * Suspend support specific for s390.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ */
+
+#include <linux/suspend.h>
+#include <linux/reboot.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/ipl.h>
+
+/*
+ * References to section boundaries
+ */
+extern const void __nosave_begin, __nosave_end;
+
+/*
+ *  check if given pfn is in the 'nosave' or in the read only NSS section
+ */
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
+					>> PAGE_SHIFT;
+	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
+	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
+
+	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
+		return 1;
+	if (pfn >= stext_pfn && pfn <= eshared_pfn) {
+		if (ipl_info.type == IPL_TYPE_NSS)
+			return 1;
+	} else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
+		return 1;
+	return 0;
+}
+
+void save_processor_state(void)
+{
+	/* swsusp_arch_suspend() actually saves all cpu register contents.
+	 * Machine checks must be disabled since swsusp_arch_suspend() stores
+	 * register contents to their lowcore save areas. That's the same
+	 * place where register contents on machine checks would be saved.
+	 * To avoid register corruption disable machine checks.
+	 * We must also disable machine checks in the new psw mask for
+	 * program checks, since swsusp_arch_suspend() may generate program
+	 * checks. Disabling machine checks for all other new psw masks is
+	 * just paranoia.
+	 */
+	local_mcck_disable();
+	/* Disable lowcore protection */
+	__ctl_clear_bit(0,28);
+	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
+}
+
+void restore_processor_state(void)
+{
+	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+	/* Enable lowcore protection */
+	__ctl_set_bit(0,28);
+	local_mcck_enable();
+}
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
new file mode 100644
index 00000000000..7cd6b096f0d
--- /dev/null
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -0,0 +1,184 @@
+/*
+ * S390 64-bit swsusp implementation
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Save register context in absolute 0 lowcore and call swsusp_save() to
+ * create in-memory kernel image. The context is saved in the designated
+ * "store status" memory locations (see POP).
+ * We return from this function twice. The first time during the suspend to
+ * disk process. The second time via the swsusp_arch_resume() function
+ * (see below) in the resume process.
+ * This function runs with disabled interrupts.
+ */
+	.section .text
+	.align	4
+	.globl swsusp_arch_suspend
+swsusp_arch_suspend:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Store prefix register on stack */
+	stpx	__SF_EMPTY(%r15)
+
+	/* Save prefix register contents for lowcore */
+	llgf	%r4,__SF_EMPTY(%r15)
+
+	/* Get pointer to save area */
+	lghi	%r1,0x1000
+
+	/* Store registers */
+	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
+	stfpc	0x31c(%r1)			/* store fpu control */
+	std	0,0x200(%r1)			/* store f0 */
+	std	1,0x208(%r1)			/* store f1 */
+	std	2,0x210(%r1)			/* store f2 */
+	std	3,0x218(%r1)			/* store f3 */
+	std	4,0x220(%r1)			/* store f4 */
+	std	5,0x228(%r1)			/* store f5 */
+	std	6,0x230(%r1)			/* store f6 */
+	std	7,0x238(%r1)			/* store f7 */
+	std	8,0x240(%r1)			/* store f8 */
+	std	9,0x248(%r1)			/* store f9 */
+	std	10,0x250(%r1)			/* store f10 */
+	std	11,0x258(%r1)			/* store f11 */
+	std	12,0x260(%r1)			/* store f12 */
+	std	13,0x268(%r1)			/* store f13 */
+	std	14,0x270(%r1)			/* store f14 */
+	std	15,0x278(%r1)			/* store f15 */
+	stam	%a0,%a15,0x340(%r1)		/* store access registers */
+	stctg	%c0,%c15,0x380(%r1)		/* store control registers */
+	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
+
+	stpt	0x328(%r1)			/* store timer */
+	stckc	0x330(%r1)			/* store clock comparator */
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	lghi	%r2,0
+	lghi	%r3,2*PAGE_SIZE
+	lghi	%r5,2*PAGE_SIZE
+1:	mvcle	%r2,%r4,0
+	jo	1b
+
+	/* Save image */
+	brasl	%r14,swsusp_save
+
+	/* Restore prefix register and return */
+	lghi	%r1,0x1000
+	spx	0x318(%r1)
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
+
+/*
+ * Restore saved memory image to correct place and restore register context.
+ * Then we return to the function that called swsusp_arch_suspend().
+ * swsusp_arch_resume() runs with disabled interrupts.
+ */
+	.globl swsusp_arch_resume
+swsusp_arch_resume:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+#ifdef CONFIG_SMP
+	/* Save boot cpu number */
+	brasl	%r14,smp_get_phys_cpu_id
+	lgr	%r10,%r2
+#endif
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	/* Restore saved image */
+	larl	%r1,restore_pblist
+	lg	%r1,0(%r1)
+	ltgr	%r1,%r1
+	jz	2f
+0:
+	lg	%r2,8(%r1)
+	lg	%r4,0(%r1)
+	lghi	%r3,PAGE_SIZE
+	lghi	%r5,PAGE_SIZE
+1:
+	mvcle	%r2,%r4,0
+	jo	1b
+	lg	%r1,16(%r1)
+	ltgr	%r1,%r1
+	jnz	0b
+2:
+	ptlb				/* flush tlb */
+
+	/* Restore registers */
+	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
+
+	spt	0x328(%r13)		/* reprogram timer */
+	//sckc	0x330(%r13)		/* set clock comparator */
+
+	lctlg	%c0,%c15,0x380(%r13)	/* load control registers */
+	lam	%a0,%a15,0x340(%r13)	/* load access registers */
+
+	lfpc	0x31c(%r13)		/* load fpu control */
+	ld	0,0x200(%r13)		/* load f0 */
+	ld	1,0x208(%r13)		/* load f1 */
+	ld	2,0x210(%r13)		/* load f2 */
+	ld	3,0x218(%r13)		/* load f3 */
+	ld	4,0x220(%r13)		/* load f4 */
+	ld	5,0x228(%r13)		/* load f5 */
+	ld	6,0x230(%r13)		/* load f6 */
+	ld	7,0x238(%r13)		/* load f7 */
+	ld	8,0x240(%r13)		/* load f8 */
+	ld	9,0x248(%r13)		/* load f9 */
+	ld	10,0x250(%r13)		/* load f10 */
+	ld	11,0x258(%r13)		/* load f11 */
+	ld	12,0x260(%r13)		/* load f12 */
+	ld	13,0x268(%r13)		/* load f13 */
+	ld	14,0x270(%r13)		/* load f14 */
+	ld	15,0x278(%r13)		/* load f15 */
+
+	/* Load old stack */
+	lg	%r15,0x2f8(%r13)
+
+	/* Pointer to save area */
+	lghi	%r13,0x1000
+
+#ifdef CONFIG_SMP
+	/* Switch CPUs */
+	lgr	%r2,%r10		/* get cpu id */
+	llgf	%r3,0x318(%r13)
+	brasl	%r14,smp_switch_boot_cpu_in_resume
+#endif
+	/* Restore prefix register */
+	spx	0x318(%r13)
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Return 0 */
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
diff --git a/arch/s390/power/Makefile b/arch/s390/power/Makefile
deleted file mode 100644
index ee2f279beff..00000000000
--- a/arch/s390/power/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for s390 PM support
-#
-
-obj-$(CONFIG_HIBERNATION) += suspend.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
diff --git a/arch/s390/power/suspend.c b/arch/s390/power/suspend.c
deleted file mode 100644
index b3351eceebb..00000000000
--- a/arch/s390/power/suspend.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Suspend support specific for s390.
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- */
-
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <linux/reboot.h>
-#include <linux/pfn.h>
-#include <asm/sections.h>
-#include <asm/ipl.h>
-
-/*
- * References to section boundaries
- */
-extern const void __nosave_begin, __nosave_end;
-
-/*
- *  check if given pfn is in the 'nosave' or in the read only NSS section
- */
-int pfn_is_nosave(unsigned long pfn)
-{
-	unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
-	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
-					>> PAGE_SHIFT;
-	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
-	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
-
-	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
-		return 1;
-	if (pfn >= stext_pfn && pfn <= eshared_pfn) {
-		if (ipl_info.type == IPL_TYPE_NSS)
-			return 1;
-	} else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
-		return 1;
-	return 0;
-}
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
deleted file mode 100644
index bd1f5c6b0b8..00000000000
--- a/arch/s390/power/swsusp.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-#include <asm/system.h>
-
-void save_processor_state(void)
-{
-	/* swsusp_arch_suspend() actually saves all cpu register contents.
-	 * Machine checks must be disabled since swsusp_arch_suspend() stores
-	 * register contents to their lowcore save areas. That's the same
-	 * place where register contents on machine checks would be saved.
-	 * To avoid register corruption disable machine checks.
-	 * We must also disable machine checks in the new psw mask for
-	 * program checks, since swsusp_arch_suspend() may generate program
-	 * checks. Disabling machine checks for all other new psw masks is
-	 * just paranoia.
-	 */
-	local_mcck_disable();
-	/* Disable lowcore protection */
-	__ctl_clear_bit(0,28);
-	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
-}
-
-void restore_processor_state(void)
-{
-	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
-	/* Enable lowcore protection */
-	__ctl_set_bit(0,28);
-	local_mcck_enable();
-}
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
deleted file mode 100644
index b26df5c5933..00000000000
--- a/arch/s390/power/swsusp_asm64.S
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * S390 64-bit swsusp implementation
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
- */
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-
-/*
- * Save register context in absolute 0 lowcore and call swsusp_save() to
- * create in-memory kernel image. The context is saved in the designated
- * "store status" memory locations (see POP).
- * We return from this function twice. The first time during the suspend to
- * disk process. The second time via the swsusp_arch_resume() function
- * (see below) in the resume process.
- * This function runs with disabled interrupts.
- */
-	.section .text
-	.align	2
-	.globl swsusp_arch_suspend
-swsusp_arch_suspend:
-	stmg	%r6,%r15,__SF_GPRS(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-STACK_FRAME_OVERHEAD
-	stg	%r1,__SF_BACKCHAIN(%r15)
-
-	/* Deactivate DAT */
-	stnsm	__SF_EMPTY(%r15),0xfb
-
-	/* Store prefix register on stack */
-	stpx	__SF_EMPTY(%r15)
-
-	/* Save prefix register contents for lowcore */
-	llgf	%r4,__SF_EMPTY(%r15)
-
-	/* Get pointer to save area */
-	lghi	%r1,0x1000
-
-	/* Store registers */
-	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
-	stfpc	0x31c(%r1)			/* store fpu control */
-	std	0,0x200(%r1)			/* store f0 */
-	std	1,0x208(%r1)			/* store f1 */
-	std	2,0x210(%r1)			/* store f2 */
-	std	3,0x218(%r1)			/* store f3 */
-	std	4,0x220(%r1)			/* store f4 */
-	std	5,0x228(%r1)			/* store f5 */
-	std	6,0x230(%r1)			/* store f6 */
-	std	7,0x238(%r1)			/* store f7 */
-	std	8,0x240(%r1)			/* store f8 */
-	std	9,0x248(%r1)			/* store f9 */
-	std	10,0x250(%r1)			/* store f10 */
-	std	11,0x258(%r1)			/* store f11 */
-	std	12,0x260(%r1)			/* store f12 */
-	std	13,0x268(%r1)			/* store f13 */
-	std	14,0x270(%r1)			/* store f14 */
-	std	15,0x278(%r1)			/* store f15 */
-	stam	%a0,%a15,0x340(%r1)		/* store access registers */
-	stctg	%c0,%c15,0x380(%r1)		/* store control registers */
-	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
-
-	stpt	0x328(%r1)			/* store timer */
-	stckc	0x330(%r1)			/* store clock comparator */
-
-	/* Activate DAT */
-	stosm	__SF_EMPTY(%r15),0x04
-
-	/* Set prefix page to zero */
-	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
-	spx	__SF_EMPTY(%r15)
-
-	lghi	%r2,0
-	lghi	%r3,2*PAGE_SIZE
-	lghi	%r5,2*PAGE_SIZE
-1:	mvcle	%r2,%r4,0
-	jo	1b
-
-	/* Save image */
-	brasl	%r14,swsusp_save
-
-	/* Restore prefix register and return */
-	lghi	%r1,0x1000
-	spx	0x318(%r1)
-	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
-	lghi	%r2,0
-	br	%r14
-
-/*
- * Restore saved memory image to correct place and restore register context.
- * Then we return to the function that called swsusp_arch_suspend().
- * swsusp_arch_resume() runs with disabled interrupts.
- */
-	.globl swsusp_arch_resume
-swsusp_arch_resume:
-	stmg	%r6,%r15,__SF_GPRS(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-STACK_FRAME_OVERHEAD
-	stg	%r1,__SF_BACKCHAIN(%r15)
-
-#ifdef CONFIG_SMP
-	/* Save boot cpu number */
-	brasl	%r14,smp_get_phys_cpu_id
-	lgr	%r10,%r2
-#endif
-	/* Deactivate DAT */
-	stnsm	__SF_EMPTY(%r15),0xfb
-
-	/* Set prefix page to zero */
-	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
-	spx	__SF_EMPTY(%r15)
-
-	/* Restore saved image */
-	larl	%r1,restore_pblist
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
-	jz	2f
-0:
-	lg	%r2,8(%r1)
-	lg	%r4,0(%r1)
-	lghi	%r3,PAGE_SIZE
-	lghi	%r5,PAGE_SIZE
-1:
-	mvcle	%r2,%r4,0
-	jo	1b
-	lg	%r1,16(%r1)
-	ltgr	%r1,%r1
-	jnz	0b
-2:
-	ptlb				/* flush tlb */
-
-	/* Restore registers */
-	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
-
-	spt	0x328(%r13)		/* reprogram timer */
-	//sckc	0x330(%r13)		/* set clock comparator */
-
-	lctlg	%c0,%c15,0x380(%r13)	/* load control registers */
-	lam	%a0,%a15,0x340(%r13)	/* load access registers */
-
-	lfpc	0x31c(%r13)		/* load fpu control */
-	ld	0,0x200(%r13)		/* load f0 */
-	ld	1,0x208(%r13)		/* load f1 */
-	ld	2,0x210(%r13)		/* load f2 */
-	ld	3,0x218(%r13)		/* load f3 */
-	ld	4,0x220(%r13)		/* load f4 */
-	ld	5,0x228(%r13)		/* load f5 */
-	ld	6,0x230(%r13)		/* load f6 */
-	ld	7,0x238(%r13)		/* load f7 */
-	ld	8,0x240(%r13)		/* load f8 */
-	ld	9,0x248(%r13)		/* load f9 */
-	ld	10,0x250(%r13)		/* load f10 */
-	ld	11,0x258(%r13)		/* load f11 */
-	ld	12,0x260(%r13)		/* load f12 */
-	ld	13,0x268(%r13)		/* load f13 */
-	ld	14,0x270(%r13)		/* load f14 */
-	ld	15,0x278(%r13)		/* load f15 */
-
-	/* Load old stack */
-	lg	%r15,0x2f8(%r13)
-
-	/* Pointer to save area */
-	lghi	%r13,0x1000
-
-#ifdef CONFIG_SMP
-	/* Switch CPUs */
-	lgr	%r2,%r10		/* get cpu id */
-	llgf	%r3,0x318(%r13)
-	brasl	%r14,smp_switch_boot_cpu_in_resume
-#endif
-	/* Restore prefix register */
-	spx	0x318(%r13)
-
-	/* Activate DAT */
-	stosm	__SF_EMPTY(%r15),0x04
-
-	/* Return 0 */
-	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
-	lghi	%r2,0
-	br	%r14
-- 
cgit v1.2.3


From 684d2fd48e718e70dad21ef7c528649578147e48 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:40 +0200
Subject: [S390] kernel: Append scpdata to kernel boot command line

Append scpdata to the kernel boot command line. If scpdata starts
with the equal sign (=), the kernel boot command line is replaced.
(For consistency with zIPL and IPL PARM parameters.)

To use scpdata for the kernel boot command line, scpdata must consist
of ascii characters only. If scpdata contains other characters,
scpdata is not appended to the kernel boot command line.
In addition, re-IPL is extended for setting scpdata for the next
Linux reboot.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/ipl.h   |   5 +-
 arch/s390/include/asm/setup.h |   2 +-
 arch/s390/kernel/early.c      |  35 +++++++---
 arch/s390/kernel/ipl.c        | 157 ++++++++++++++++++++++++++++++++++++++----
 4 files changed, 172 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 1171e6d144a..5e95d95450b 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -57,6 +57,8 @@ struct ipl_block_fcp {
 } __attribute__((packed));
 
 #define DIAG308_VMPARM_SIZE	64
+#define DIAG308_SCPDATA_SIZE	(PAGE_SIZE - (sizeof(struct ipl_list_hdr) + \
+				 offsetof(struct ipl_block_fcp, scp_data)))
 
 struct ipl_block_ccw {
 	u8  load_parm[8];
@@ -91,7 +93,8 @@ extern void do_halt(void);
 extern void do_poff(void);
 extern void ipl_save_parameters(void);
 extern void ipl_update_parameters(void);
-extern void get_ipl_vmparm(char *);
+extern size_t append_ipl_vmparm(char *, size_t);
+extern size_t append_ipl_scpdata(char *, size_t);
 
 enum {
 	IPL_DEVNO_VALID		= 1,
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 38b0fc221ed..e37478e8728 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -8,7 +8,7 @@
 #ifndef _ASM_S390_SETUP_H
 #define _ASM_S390_SETUP_H
 
-#define COMMAND_LINE_SIZE	1024
+#define COMMAND_LINE_SIZE	4096
 
 #define ARCH_COMMAND_LINE_SIZE	896
 
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index cae14c49951..21f3799fe27 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -81,6 +81,8 @@ asm(
 	"	br	14\n"
 	"	.size	savesys_ipl_nss, .-savesys_ipl_nss\n");
 
+static __initdata char upper_command_line[COMMAND_LINE_SIZE];
+
 static noinline __init void create_kernel_nss(void)
 {
 	unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size;
@@ -90,7 +92,6 @@ static noinline __init void create_kernel_nss(void)
 	int response;
 	size_t len;
 	char *savesys_ptr;
-	char upper_command_line[COMMAND_LINE_SIZE];
 	char defsys_cmd[DEFSYS_CMD_SIZE];
 	char savesys_cmd[SAVESYS_CMD_SIZE];
 
@@ -367,21 +368,35 @@ static __init void rescue_initrd(void)
 }
 
 /* Set up boot command line */
-static void __init setup_boot_command_line(void)
+static void __init append_to_cmdline(size_t (*ipl_data)(char *, size_t))
 {
-	char *parm = NULL;
+	char *parm, *delim;
+	size_t rc, len;
+
+	len = strlen(boot_command_line);
 
+	delim = boot_command_line + len;	/* '\0' character position */
+	parm  = boot_command_line + len + 1;	/* append right after '\0' */
+
+	rc = ipl_data(parm, COMMAND_LINE_SIZE - len - 1);
+	if (rc) {
+		if (*parm == '=')
+			memmove(boot_command_line, parm + 1, rc);
+		else
+			*delim = ' ';		/* replace '\0' with space */
+	}
+}
+
+static void __init setup_boot_command_line(void)
+{
 	/* copy arch command line */
 	strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
 
 	/* append IPL PARM data to the boot command line */
-	if (MACHINE_IS_VM) {
-		parm = boot_command_line + strlen(boot_command_line);
-		*parm++ = ' ';
-		get_ipl_vmparm(parm);
-		if (parm[0] == '=')
-			memmove(boot_command_line, parm + 1, strlen(parm));
-	}
+	if (MACHINE_IS_VM)
+		append_to_cmdline(append_ipl_vmparm);
+
+	append_to_cmdline(append_ipl_scpdata);
 }
 
 
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 371a2d88f4a..04451a5e3c1 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -272,17 +272,18 @@ static ssize_t ipl_type_show(struct kobject *kobj, struct kobj_attribute *attr,
 static struct kobj_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type);
 
 /* VM IPL PARM routines */
-static void reipl_get_ascii_vmparm(char *dest,
+size_t reipl_get_ascii_vmparm(char *dest, size_t size,
 				   const struct ipl_parameter_block *ipb)
 {
 	int i;
-	int len = 0;
+	size_t len;
 	char has_lowercase = 0;
 
+	len = 0;
 	if ((ipb->ipl_info.ccw.vm_flags & DIAG308_VM_FLAGS_VP_VALID) &&
 	    (ipb->ipl_info.ccw.vm_parm_len > 0)) {
 
-		len = ipb->ipl_info.ccw.vm_parm_len;
+		len = min_t(size_t, size - 1, ipb->ipl_info.ccw.vm_parm_len);
 		memcpy(dest, ipb->ipl_info.ccw.vm_parm, len);
 		/* If at least one character is lowercase, we assume mixed
 		 * case; otherwise we convert everything to lowercase.
@@ -299,14 +300,20 @@ static void reipl_get_ascii_vmparm(char *dest,
 		EBCASC(dest, len);
 	}
 	dest[len] = 0;
+
+	return len;
 }
 
-void get_ipl_vmparm(char *dest)
+size_t append_ipl_vmparm(char *dest, size_t size)
 {
+	size_t rc;
+
+	rc = 0;
 	if (diag308_set_works && (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_CCW))
-		reipl_get_ascii_vmparm(dest, &ipl_block);
+		rc = reipl_get_ascii_vmparm(dest, size, &ipl_block);
 	else
 		dest[0] = 0;
+	return rc;
 }
 
 static ssize_t ipl_vm_parm_show(struct kobject *kobj,
@@ -314,10 +321,56 @@ static ssize_t ipl_vm_parm_show(struct kobject *kobj,
 {
 	char parm[DIAG308_VMPARM_SIZE + 1] = {};
 
-	get_ipl_vmparm(parm);
+	append_ipl_vmparm(parm, sizeof(parm));
 	return sprintf(page, "%s\n", parm);
 }
 
+static size_t scpdata_length(const char* buf, size_t count)
+{
+	while (count) {
+		if (buf[count - 1] != '\0' && buf[count - 1] != ' ')
+			break;
+		count--;
+	}
+	return count;
+}
+
+size_t reipl_append_ascii_scpdata(char *dest, size_t size,
+				  const struct ipl_parameter_block *ipb)
+{
+	size_t count;
+	size_t i;
+
+	count = min(size - 1, scpdata_length(ipb->ipl_info.fcp.scp_data,
+					     ipb->ipl_info.fcp.scp_data_len));
+	if (!count)
+		goto out;
+
+	for (i = 0; i < count; i++)
+		if (!isascii(ipb->ipl_info.fcp.scp_data[i])) {
+			count = 0;
+			goto out;
+		}
+
+	memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+out:
+	dest[count] = '\0';
+	return count;
+}
+
+size_t append_ipl_scpdata(char *dest, size_t len)
+{
+	size_t rc;
+
+	rc = 0;
+	if (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_FCP)
+		rc = reipl_append_ascii_scpdata(dest, len, &ipl_block);
+	else
+		dest[0] = 0;
+	return rc;
+}
+
+
 static struct kobj_attribute sys_ipl_vm_parm_attr =
 	__ATTR(parm, S_IRUGO, ipl_vm_parm_show, NULL);
 
@@ -553,7 +606,7 @@ static ssize_t reipl_generic_vmparm_show(struct ipl_parameter_block *ipb,
 {
 	char vmparm[DIAG308_VMPARM_SIZE + 1] = {};
 
-	reipl_get_ascii_vmparm(vmparm, ipb);
+	reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
 	return sprintf(page, "%s\n", vmparm);
 }
 
@@ -626,6 +679,59 @@ static struct kobj_attribute sys_reipl_ccw_vmparm_attr =
 
 /* FCP reipl device attributes */
 
+static ssize_t reipl_fcp_scpdata_read(struct kobject *kobj,
+				      struct bin_attribute *attr,
+				      char *buf, loff_t off, size_t count)
+{
+	size_t size = reipl_block_fcp->ipl_info.fcp.scp_data_len;
+	void *scp_data = reipl_block_fcp->ipl_info.fcp.scp_data;
+
+	return memory_read_from_buffer(buf, count, &off, scp_data, size);
+}
+
+static ssize_t reipl_fcp_scpdata_write(struct kobject *kobj,
+				       struct bin_attribute *attr,
+				       char *buf, loff_t off, size_t count)
+{
+	size_t padding;
+	size_t scpdata_len;
+
+	if (off < 0)
+		return -EINVAL;
+
+	if (off >= DIAG308_SCPDATA_SIZE)
+		return -ENOSPC;
+
+	if (count > DIAG308_SCPDATA_SIZE - off)
+		count = DIAG308_SCPDATA_SIZE - off;
+
+	memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf + off, count);
+	scpdata_len = off + count;
+
+	if (scpdata_len % 8) {
+		padding = 8 - (scpdata_len % 8);
+		memset(reipl_block_fcp->ipl_info.fcp.scp_data + scpdata_len,
+		       0, padding);
+		scpdata_len += padding;
+	}
+
+	reipl_block_fcp->ipl_info.fcp.scp_data_len = scpdata_len;
+	reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN + scpdata_len;
+	reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN + scpdata_len;
+
+	return count;
+}
+
+static struct bin_attribute sys_reipl_fcp_scp_data_attr = {
+	.attr = {
+		.name = "scp_data",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = PAGE_SIZE,
+	.read = reipl_fcp_scpdata_read,
+	.write = reipl_fcp_scpdata_write,
+};
+
 DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n",
 		   reipl_block_fcp->ipl_info.fcp.wwpn);
 DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%016llx\n",
@@ -647,7 +753,6 @@ static struct attribute *reipl_fcp_attrs[] = {
 };
 
 static struct attribute_group reipl_fcp_attr_group = {
-	.name  = IPL_FCP_STR,
 	.attrs = reipl_fcp_attrs,
 };
 
@@ -895,6 +1000,7 @@ static struct kobj_attribute reipl_type_attr =
 	__ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store);
 
 static struct kset *reipl_kset;
+static struct kset *reipl_fcp_kset;
 
 static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
 			   const enum ipl_method m)
@@ -906,7 +1012,7 @@ static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
 
 	reipl_get_ascii_loadparm(loadparm, ipb);
 	reipl_get_ascii_nss_name(nss_name, ipb);
-	reipl_get_ascii_vmparm(vmparm, ipb);
+	reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
 
 	switch (m) {
 	case REIPL_METHOD_CCW_VM:
@@ -1076,23 +1182,44 @@ static int __init reipl_fcp_init(void)
 	int rc;
 
 	if (!diag308_set_works) {
-		if (ipl_info.type == IPL_TYPE_FCP)
+		if (ipl_info.type == IPL_TYPE_FCP) {
 			make_attrs_ro(reipl_fcp_attrs);
-		else
+			sys_reipl_fcp_scp_data_attr.attr.mode = S_IRUGO;
+		} else
 			return 0;
 	}
 
 	reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!reipl_block_fcp)
 		return -ENOMEM;
-	rc = sysfs_create_group(&reipl_kset->kobj, &reipl_fcp_attr_group);
+
+	/* sysfs: create fcp kset for mixing attr group and bin attrs */
+	reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL,
+					     &reipl_kset->kobj);
+	if (!reipl_kset) {
+		free_page((unsigned long) reipl_block_fcp);
+		return -ENOMEM;
+	}
+
+	rc = sysfs_create_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
 	if (rc) {
-		free_page((unsigned long)reipl_block_fcp);
+		kset_unregister(reipl_fcp_kset);
+		free_page((unsigned long) reipl_block_fcp);
 		return rc;
 	}
-	if (ipl_info.type == IPL_TYPE_FCP) {
+
+	rc = sysfs_create_bin_file(&reipl_fcp_kset->kobj,
+				   &sys_reipl_fcp_scp_data_attr);
+	if (rc) {
+		sysfs_remove_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
+		kset_unregister(reipl_fcp_kset);
+		free_page((unsigned long) reipl_block_fcp);
+		return rc;
+	}
+
+	if (ipl_info.type == IPL_TYPE_FCP)
 		memcpy(reipl_block_fcp, IPL_PARMBLOCK_START, PAGE_SIZE);
-	} else {
+	else {
 		reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN;
 		reipl_block_fcp->hdr.version = IPL_PARM_BLOCK_VERSION;
 		reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN;
-- 
cgit v1.2.3


From 18d00acfe2f3fc5ee62f679eb2e397ae962fe69b Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:41 +0200
Subject: [S390] kernel: Convert upper case scpdata to lower case

If the CP SET LOADDEV on the 3215 console has been used to specify
SCPdata, all data is converted to upper case letters.

When scpdata contains upper case letters only, convert all letters
to lower case.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ipl.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 04451a5e3c1..ee57a42e6e9 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -340,19 +340,28 @@ size_t reipl_append_ascii_scpdata(char *dest, size_t size,
 {
 	size_t count;
 	size_t i;
+	int has_lowercase;
 
 	count = min(size - 1, scpdata_length(ipb->ipl_info.fcp.scp_data,
 					     ipb->ipl_info.fcp.scp_data_len));
 	if (!count)
 		goto out;
 
-	for (i = 0; i < count; i++)
+	has_lowercase = 0;
+	for (i = 0; i < count; i++) {
 		if (!isascii(ipb->ipl_info.fcp.scp_data[i])) {
 			count = 0;
 			goto out;
 		}
+		if (!has_lowercase && islower(ipb->ipl_info.fcp.scp_data[i]))
+			has_lowercase = 1;
+	}
 
-	memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+	if (has_lowercase)
+		memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+	else
+		for (i = 0; i < count; i++)
+			dest[i] = tolower(ipb->ipl_info.fcp.scp_data[i]);
 out:
 	dest[count] = '\0';
 	return count;
-- 
cgit v1.2.3


From a8c3cb4955d1a051732ead9ecf8bcffc8e7c039d Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:42 +0200
Subject: [S390] move (io|sysc)_restore_trace_psw into .data section

The sysc_restore_trace_psw and io_restore_trace_psw storage locations
are created in the .text section. When creating and IPLing from a named
saved system (NSS), writing to these locations causes a protection exception
(because the .text section is mapped as shared read-only in the NSS).

To permit write access, move the storage locations into the .data section.

The problem occurs only when CONFIG_TRACE_IRQFLAGS is set.
The git commmit that has introduced these variables is:
411788ea7fca01ee803af8225ac35807b4d02050

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/entry.S   | 16 ++++++++++++++--
 arch/s390/kernel/entry64.S |  4 ++++
 2 files changed, 18 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index c4c80a22bc1..f78580a7403 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -278,7 +278,8 @@ sysc_return:
 	bnz	BASED(sysc_work)  # there is work to do (signals etc.)
 sysc_restore:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	la	%r1,BASED(sysc_restore_trace_psw)
+	la	%r1,BASED(sysc_restore_trace_psw_addr)
+	l	%r1,0(%r1)
 	lpsw	0(%r1)
 sysc_restore_trace:
 	TRACE_IRQS_CHECK
@@ -289,10 +290,15 @@ sysc_leave:
 sysc_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+sysc_restore_trace_psw_addr:
+	.long sysc_restore_trace_psw
+
+	.section .data,"aw",@progbits
 	.align	8
 	.globl	sysc_restore_trace_psw
 sysc_restore_trace_psw:
 	.long	0, sysc_restore_trace + 0x80000000
+	.previous
 #endif
 
 #
@@ -606,7 +612,8 @@ io_return:
 	bnz	BASED(io_work)		# there is work to do (signals etc.)
 io_restore:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	la	%r1,BASED(io_restore_trace_psw)
+	la	%r1,BASED(io_restore_trace_psw_addr)
+	l	%r1,0(%r1)
 	lpsw	0(%r1)
 io_restore_trace:
 	TRACE_IRQS_CHECK
@@ -617,10 +624,15 @@ io_leave:
 io_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+io_restore_trace_psw_addr:
+	.long io_restore_trace_psw
+
+	.section .data,"aw",@progbits
 	.align	8
 	.globl	io_restore_trace_psw
 io_restore_trace_psw:
 	.long	0, io_restore_trace + 0x80000000
+	.previous
 #endif
 
 #
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index f6618e9e15e..009ca6175db 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -284,10 +284,12 @@ sysc_leave:
 sysc_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+	.section .data,"aw",@progbits
 	.align	8
 	.globl sysc_restore_trace_psw
 sysc_restore_trace_psw:
 	.quad	0, sysc_restore_trace
+	.previous
 #endif
 
 #
@@ -595,10 +597,12 @@ io_leave:
 io_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+	.section .data,"aw",@progbits
 	.align	8
 	.globl io_restore_trace_psw
 io_restore_trace_psw:
 	.quad	0, io_restore_trace
+	.previous
 #endif
 
 #
-- 
cgit v1.2.3


From 26803144666bd2155a19392fa58a7d512d9c0962 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 11 Sep 2009 10:28:43 +0200
Subject: [S390] Use macros for .data.page_aligned.

.data.page_aligned should not need a separate output section, so as
part of this cleanup I moved into the .data output section in the
linker scripts in order to eliminate unnecessary references to the
section name.

Remove the reference to .data.idt, since nothing is put into the
.data.idt section on the s390 architecture.  It looks like Cyrill
Gorcunov posted a patch to remove the .data.idt code on s390
previously:

<http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/2536.html>

CCing him and the people who acked that patch in case there's a reason
it wasn't applied.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/vmlinux.lds.S | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index a53db23ee09..8e023c8c246 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -60,6 +60,7 @@ SECTIONS
 	} :data
 
 	.data : {		/* Data */
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 		DATA_DATA
 		CONSTRUCTORS
 	}
@@ -72,11 +73,6 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__nosave_end = .;
 
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.idt)
-	}
-
 	. = ALIGN(0x100);
 	.data.cacheline_aligned : {
 		*(.data.cacheline_aligned)
-- 
cgit v1.2.3


From 04a95f6df9d7753098729ef1464e38552627af9d Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 11 Sep 2009 10:28:44 +0200
Subject: [S390] clean up linker script using new linker script macros.

Note that this patch moves .data.init_task inside _edata.  In
addition, the alignment of .init.ramfs changes: It is now PAGE_ALIGNED
and __initramfs_end is arbitrarily aligned; Previously it was
only aligned to a 0x100-byte boundary, and always ended on an even
byte.

This change results in fewer output sections and in some data being
reordered, but should have no functional effect.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/vmlinux.lds.S | 83 ++++--------------------------------------
 1 file changed, 7 insertions(+), 76 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 8e023c8c246..7315f9e67e1 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -52,51 +52,18 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	_eshared = .;		/* End of shareable data */
 
-	. = ALIGN(16);		/* Exception table */
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	} :data
-
-	.data : {		/* Data */
-		PAGE_ALIGNED_DATA(PAGE_SIZE)
-		DATA_DATA
-		CONSTRUCTORS
-	}
-
-	. = ALIGN(PAGE_SIZE);
-	.data_nosave : {
-	__nosave_begin = .;
-		*(.data.nosave)
-	}
-	. = ALIGN(PAGE_SIZE);
-	__nosave_end = .;
+	EXCEPTION_TABLE(16) :data
 
-	. = ALIGN(0x100);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
+	RW_DATA_SECTION(0x100, PAGE_SIZE, THREAD_SIZE)
 
-	. = ALIGN(0x100);
-	.data.read_mostly : {
-		*(.data.read_mostly)
-	}
 	_edata = .;		/* End of data section */
 
-	. = ALIGN(THREAD_SIZE);	/* init_task */
-	.data.init_task : {
-		*(.data.init_task)
-	}
-
 	/* will be freed after init */
 	. = ALIGN(PAGE_SIZE);	/* Init code and data */
 	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
+
+	INIT_TEXT_SECTION(PAGE_SIZE)
+
 	/*
 	 * .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -107,49 +74,13 @@ SECTIONS
 
 	/* early.c uses stsi, which requires page aligned data. */
 	. = ALIGN(PAGE_SIZE);
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(0x100);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(0x100);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		. = ALIGN(2);
-		__initramfs_end = .;
-	}
-#endif
+	INIT_DATA_SECTION(0x100)
 
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;		/* freed after init ends here */
 
-	/* BSS */
-	.bss : {
-		__bss_start = .;
-		*(.bss)
-		. = ALIGN(2);
-		__bss_stop = .;
-	}
+	BSS_SECTION(0, 2, 0)
 
 	_end = . ;
 
-- 
cgit v1.2.3


From d3135e0c40c9a13ad0c57783f2b9569c4c00bd26 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:45 +0200
Subject: [S390] kernel: always keep machine flags in lowcore

Eleminate the local variable machine_flags and always change machine
flags directly in the lowcore.
This avoids confusion about when and why the two variables have to be
synchronized.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/early.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 21f3799fe27..734deeaa736 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -35,8 +35,6 @@
 
 char kernel_nss_name[NSS_NAME_SIZE + 1];
 
-static unsigned long machine_flags;
-
 static void __init setup_boot_command_line(void);
 
 /*
@@ -206,12 +204,9 @@ static noinline __init void detect_machine_type(void)
 
 	/* Running under KVM? If not we assume z/VM */
 	if (!memcmp(vmms.vm[0].cpi, "\xd2\xe5\xd4", 3))
-		machine_flags |= MACHINE_FLAG_KVM;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_KVM;
 	else
-		machine_flags |= MACHINE_FLAG_VM;
-
-	/* Store machine flags for setting up lowcore early */
-	S390_lowcore.machine_flags = machine_flags;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_VM;
 }
 
 static __init void early_pgm_check_handler(void)
@@ -246,7 +241,7 @@ static noinline __init void setup_hpage(void)
 	facilities = stfl();
 	if (!(facilities & (1UL << 23)) || !(facilities & (1UL << 29)))
 		return;
-	machine_flags |= MACHINE_FLAG_HPAGE;
+	S390_lowcore.machine_flags |= MACHINE_FLAG_HPAGE;
 	__ctl_set_bit(0, 23);
 #endif
 }
@@ -264,7 +259,7 @@ static __init void detect_mvpg(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP), "a" (0) : "memory", "cc", "0");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_MVPG;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_MVPG;
 #endif
 }
 
@@ -280,7 +275,7 @@ static __init void detect_ieee(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc), "=d" (tmp): "0" (-EOPNOTSUPP) : "cc");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_IEEE;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_IEEE;
 #endif
 }
 
@@ -299,7 +294,7 @@ static __init void detect_csp(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc", "0", "1", "2");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_CSP;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_CSP;
 #endif
 }
 
@@ -316,7 +311,7 @@ static __init void detect_diag9c(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP), "d" (cpu_address) : "cc");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_DIAG9C;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG9C;
 }
 
 static __init void detect_diag44(void)
@@ -331,7 +326,7 @@ static __init void detect_diag44(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_DIAG44;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG44;
 #endif
 }
 
@@ -342,11 +337,11 @@ static __init void detect_machine_facilities(void)
 
 	facilities = stfl();
 	if (facilities & (1 << 28))
-		machine_flags |= MACHINE_FLAG_IDTE;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_IDTE;
 	if (facilities & (1 << 23))
-		machine_flags |= MACHINE_FLAG_PFMF;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_PFMF;
 	if (facilities & (1 << 4))
-		machine_flags |= MACHINE_FLAG_MVCOS;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
 #endif
 }
 
@@ -428,7 +423,6 @@ void __init startup_init(void)
 	setup_hpage();
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
-	S390_lowcore.machine_flags = machine_flags;
 #ifdef CONFIG_DYNAMIC_FTRACE
 	S390_lowcore.ftrace_func = (unsigned long)ftrace_caller;
 #endif
-- 
cgit v1.2.3


From 275c340941991a925969c03ec6b900fd135d09dd Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 11 Sep 2009 10:28:46 +0200
Subject: [S390] remove unused irq_cpustat_t defintion

No need to defined a irq_cpustat_t type if __ARCH_IRQ_STAT is defined.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/hardirq.h | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
index 89ec7056da2..498bc389238 100644
--- a/arch/s390/include/asm/hardirq.h
+++ b/arch/s390/include/asm/hardirq.h
@@ -18,13 +18,6 @@
 #include <linux/interrupt.h>
 #include <asm/lowcore.h>
 
-/* irq_cpustat_t is unused currently, but could be converted
- * into a percpu variable instead of storing softirq_pending
- * on the lowcore */
-typedef struct {
-	unsigned int __softirq_pending;
-} irq_cpustat_t;
-
 #define local_softirq_pending() (S390_lowcore.softirq_pending)
 
 #define __ARCH_IRQ_STAT
-- 
cgit v1.2.3


From 2395ecd98f028b16a6200eb81108a0f67461d16b Mon Sep 17 00:00:00 2001
From: Vitaliy Gusev <vgusev@openvz.org>
Date: Fri, 11 Sep 2009 10:28:48 +0200
Subject: [S390] hypfs: remove useless variable qname

Local variable 'qname' in the function hypfs_create_file() really is not
used for any purpose.

Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Cc: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/hypfs/inode.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 5a805df216b..e760b5b0141 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -355,11 +355,7 @@ static struct dentry *hypfs_create_file(struct super_block *sb,
 {
 	struct dentry *dentry;
 	struct inode *inode;
-	struct qstr qname;
 
-	qname.name = name;
-	qname.len = strlen(name);
-	qname.hash = full_name_hash(name, qname.len);
 	mutex_lock(&parent->d_inode->i_mutex);
 	dentry = lookup_one_len(name, parent, strlen(name));
 	if (IS_ERR(dentry)) {
-- 
cgit v1.2.3


From 11af97e18ea8c310d73b59f1361e6f04444e05a8 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:53 +0200
Subject: [S390] kernel: Print an error message if kernel NSS cannot be defined

If a named saved system (NSS) cannot be defined or saved, print out an
error message with the return code of the underlying z/VM CP command.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/early.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 734deeaa736..bf8b4ae7ff2 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -6,6 +6,9 @@
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  */
 
+#define KMSG_COMPONENT "setup"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/errno.h>
@@ -16,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/pfn.h>
 #include <linux/uaccess.h>
+#include <linux/kernel.h>
 #include <asm/ebcdic.h>
 #include <asm/ipl.h>
 #include <asm/lowcore.h>
@@ -140,6 +144,8 @@ static noinline __init void create_kernel_nss(void)
 	__cpcmd(defsys_cmd, NULL, 0, &response);
 
 	if (response != 0) {
+		pr_err("Defining the Linux kernel NSS failed with rc=%d\n",
+			response);
 		kernel_nss_name[0] = '\0';
 		return;
 	}
@@ -152,8 +158,11 @@ static noinline __init void create_kernel_nss(void)
 	 *	       max SAVESYS_CMD_SIZE
 	 * On error: response contains the numeric portion of cp error message.
 	 *	     for SAVESYS it will be >= 263
+	 *	     for missing privilege class, it will be 1
 	 */
-	if (response > SAVESYS_CMD_SIZE) {
+	if (response > SAVESYS_CMD_SIZE || response == 1) {
+		pr_err("Saving the Linux kernel NSS failed with rc=%d\n",
+			response);
 		kernel_nss_name[0] = '\0';
 		return;
 	}
-- 
cgit v1.2.3


From ad2a5d8e0b518f997af126dd737127bdada90a6f Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:54 +0200
Subject: [S390] hypfs: Use "%u" instead of "%d" for unsigned ints in snprintf

For printing unsigned integers hypfs uses "%d" in snprintf(). This is wrong.
With this patch "%u" is used instead.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/hypfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index e760b5b0141..bd9914b8948 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -422,7 +422,7 @@ struct dentry *hypfs_create_u64(struct super_block *sb, struct dentry *dir,
 	char tmp[TMP_SIZE];
 	struct dentry *dentry;
 
-	snprintf(tmp, TMP_SIZE, "%lld\n", (unsigned long long int)value);
+	snprintf(tmp, TMP_SIZE, "%llu\n", (unsigned long long int)value);
 	buffer = kstrdup(tmp, GFP_KERNEL);
 	if (!buffer)
 		return ERR_PTR(-ENOMEM);
-- 
cgit v1.2.3


From c4de0c1a18237c2727dde8ad392e333539b0af3c Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:56 +0200
Subject: [S390] kvm: use console_initcall() to initialize s390 virtio console

Use a console_initcall() to initialize the s390 virtio console and
clean up s390 console initialization in setup.c.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/kvm_virtio.h | 10 ----------
 arch/s390/kernel/setup.c           | 10 +++-------
 2 files changed, 3 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h
index 0503936f101..acdfdff2661 100644
--- a/arch/s390/include/asm/kvm_virtio.h
+++ b/arch/s390/include/asm/kvm_virtio.h
@@ -54,14 +54,4 @@ struct kvm_vqconfig {
  * This is pagesize for historical reasons. */
 #define KVM_S390_VIRTIO_RING_ALIGN	4096
 
-#ifdef __KERNEL__
-/* early virtio console setup */
-#ifdef CONFIG_S390_GUEST
-extern void s390_virtio_console_init(void);
-#else
-static inline void s390_virtio_console_init(void)
-{
-}
-#endif /* CONFIG_VIRTIO_CONSOLE */
-#endif /* __KERNEL__ */
 #endif
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index cbb897bc50b..9ed13a1ed37 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -156,15 +156,11 @@ __setup("condev=", condev_setup);
 
 static void __init set_preferred_console(void)
 {
-	if (MACHINE_IS_KVM) {
+	if (MACHINE_IS_KVM)
 		add_preferred_console("hvc", 0, NULL);
-		s390_virtio_console_init();
-		return;
-	}
-
-	if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+	else if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
 		add_preferred_console("ttyS", 0, NULL);
-	if (CONSOLE_IS_3270)
+	else if (CONSOLE_IS_3270)
 		add_preferred_console("tty3270", 0, NULL);
 }
 
-- 
cgit v1.2.3


From 50aa98bad056a17655864a4d71ebc32d95c629a7 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:57 +0200
Subject: [S390] fix recursive locking on page_table_lock

Suzuki Poulose reported the following recursive locking bug on s390:

Here is the stack trace : (see Appendix I for more info)

  [<0000000000406ed6>] _spin_lock+0x52/0x94
  [<0000000000103bde>] crst_table_free+0x14e/0x1a4
  [<00000000001ba684>] __pmd_alloc+0x114/0x1ec
  [<00000000001be8d0>] handle_mm_fault+0x2cc/0xb80
  [<0000000000407d62>] do_dat_exception+0x2b6/0x3a0
  [<0000000000114f8c>] sysc_return+0x0/0x8
  [<00000200001642b2>] 0x200001642b2

The page_table_lock is already acquired in __pmd_alloc (mm/memory.c) and
it tries to populate the pud/pgd with a new pmd allocated. If another
thread populates it before we get a chance, we free the pmd using
pmd_free().

On s390x, pmd_free(even pud_free ) is #defined to crst_table_free(),
which acquires the page_table_lock to protect the crst_table index updates.

Hence this ends up in a recursive locking of the page_table_lock.

The solution suggested by Dave Hansen is to use a new spin lock in the mmu
context to protect the access to the crst_list and the pgtable_list.

Reported-by: Suzuki Poulose <suzuki@in.ibm.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/mmu.h     |  1 +
 arch/s390/include/asm/pgalloc.h |  1 +
 arch/s390/mm/pgtable.c          | 24 ++++++++++++------------
 arch/s390/mm/vmem.c             |  1 +
 4 files changed, 15 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index 3b59216e628..03be99919d6 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -2,6 +2,7 @@
 #define __MMU_H
 
 typedef struct {
+	spinlock_t list_lock;
 	struct list_head crst_list;
 	struct list_head pgtable_list;
 	unsigned long asce_bits;
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index b2658b9220f..ddad5903341 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -140,6 +140,7 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
+	spin_lock_init(&mm->context.list_lock);
 	INIT_LIST_HEAD(&mm->context.crst_list);
 	INIT_LIST_HEAD(&mm->context.pgtable_list);
 	return (pgd_t *) crst_table_alloc(mm, s390_noexec);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 56566720798..c7021524707 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -78,9 +78,9 @@ unsigned long *crst_table_alloc(struct mm_struct *mm, int noexec)
 		}
 		page->index = page_to_phys(shadow);
 	}
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	list_add(&page->lru, &mm->context.crst_list);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	return (unsigned long *) page_to_phys(page);
 }
 
@@ -89,9 +89,9 @@ void crst_table_free(struct mm_struct *mm, unsigned long *table)
 	unsigned long *shadow = get_shadow_table(table);
 	struct page *page = virt_to_page(table);
 
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	list_del(&page->lru);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	if (shadow)
 		free_pages((unsigned long) shadow, ALLOC_ORDER);
 	free_pages((unsigned long) table, ALLOC_ORDER);
@@ -182,7 +182,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 	unsigned long bits;
 
 	bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	page = NULL;
 	if (!list_empty(&mm->context.pgtable_list)) {
 		page = list_first_entry(&mm->context.pgtable_list,
@@ -191,7 +191,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 			page = NULL;
 	}
 	if (!page) {
-		spin_unlock(&mm->page_table_lock);
+		spin_unlock(&mm->context.list_lock);
 		page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
 		if (!page)
 			return NULL;
@@ -202,7 +202,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 			clear_table_pgstes(table);
 		else
 			clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
-		spin_lock(&mm->page_table_lock);
+		spin_lock(&mm->context.list_lock);
 		list_add(&page->lru, &mm->context.pgtable_list);
 	}
 	table = (unsigned long *) page_to_phys(page);
@@ -213,7 +213,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 	page->flags |= bits;
 	if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
 		list_move_tail(&page->lru, &mm->context.pgtable_list);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	return table;
 }
 
@@ -225,7 +225,7 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
 	bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
 	bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
 	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	page->flags ^= bits;
 	if (page->flags & FRAG_MASK) {
 		/* Page now has some free pgtable fragments. */
@@ -234,7 +234,7 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
 	} else
 		/* All fragments of the 4K page have been freed. */
 		list_del(&page->lru);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	if (page) {
 		pgtable_page_dtor(page);
 		__free_page(page);
@@ -245,7 +245,7 @@ void disable_noexec(struct mm_struct *mm, struct task_struct *tsk)
 {
 	struct page *page;
 
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	/* Free shadow region and segment tables. */
 	list_for_each_entry(page, &mm->context.crst_list, lru)
 		if (page->index) {
@@ -255,7 +255,7 @@ void disable_noexec(struct mm_struct *mm, struct task_struct *tsk)
 	/* "Free" second halves of page tables. */
 	list_for_each_entry(page, &mm->context.pgtable_list, lru)
 		page->flags &= ~SECOND_HALVES;
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	mm->context.noexec = 0;
 	update_mm(mm, tsk);
 }
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index e4868bfc672..5f91a38d759 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -331,6 +331,7 @@ void __init vmem_map_init(void)
 	unsigned long start, end;
 	int i;
 
+	spin_lock_init(&init_mm.context.list_lock);
 	INIT_LIST_HEAD(&init_mm.context.crst_list);
 	INIT_LIST_HEAD(&init_mm.context.pgtable_list);
 	init_mm.context.noexec = 0;
-- 
cgit v1.2.3


From 0c88ee5b7523e76e290d558c28cd0be48ffad597 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:58 +0200
Subject: [S390] Initialize __LC_THREAD_INFO early.

"lockdep: Fix backtraces" reveales a bug in early setup code: when
lockdep tries to save a stack backtrace before setup_arch has been
called the lowcore pointer for the current thread info pointer isn't
initialized yet.
However our save stack backtrace code relies on it. If the pointer
isn't initialized the saved backtrace will have zero entries.
lockdep however relies (correctly) on the fact that that cannot
happen.
A write access to some random memory region is the result.

Fix this by initializing the thread info pointer early.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/head31.S | 1 +
 arch/s390/kernel/head64.S | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index 2ced846065b..602b508cd4c 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -24,6 +24,7 @@ startup_continue:
 # Setup stack
 #
 	l	%r15,.Linittu-.LPG1(%r13)
+	st	%r15,__LC_THREAD_INFO	# cache thread info in lowcore
 	mvc	__LC_CURRENT(4),__TI_task(%r15)
 	ahi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
 	st	%r15,__LC_KERNEL_STACK	# set end of kernel stack
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 65667b2e65c..bdcb3f05bcd 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -92,6 +92,7 @@ startup_continue:
 # Setup stack
 #
 	larl	%r15,init_thread_union
+	stg	%r15,__LC_THREAD_INFO	# cache thread info in lowcore
 	lg	%r14,__TI_task(%r15)	# cache current in lowcore
 	stg	%r14,__LC_CURRENT
 	aghi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
-- 
cgit v1.2.3


From f64d04c042193183c6dad98944ae2861b998e8b7 Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:59 +0200
Subject: [S390] s390dbf: Add description for usage of "%s" in sprintf events

Using "%s" in sprintf event functions is dangerous. This patch adds a short
description for this issue to the s390 debug feature documentation.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/debug.h | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 31ed5686a96..18124b75a7a 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -167,6 +167,10 @@ debug_text_event(debug_info_t* id, int level, const char* txt)
         return debug_event_common(id,level,txt,strlen(txt));
 }
 
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
 extern debug_entry_t *
 debug_sprintf_event(debug_info_t* id,int level,char *string,...)
 	__attribute__ ((format(printf, 3, 4)));
@@ -206,7 +210,10 @@ debug_text_exception(debug_info_t* id, int level, const char* txt)
         return debug_exception_common(id,level,txt,strlen(txt));
 }
 
-
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
 extern debug_entry_t *
 debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
 	__attribute__ ((format(printf, 3, 4)));
-- 
cgit v1.2.3


From 5dd1d2ece0250125fec2dcccbfb8ab9bb2ac020c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:00 +0200
Subject: [S390] use generic scatterlist.h

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/scatterlist.h | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index 29ec8e28c8d..35d786fe93a 100644
--- a/arch/s390/include/asm/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
@@ -1,19 +1 @@
-#ifndef _ASMS390_SCATTERLIST_H
-#define _ASMS390_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-    unsigned long sg_magic;
-#endif
-    unsigned long page_link;
-    unsigned int offset;
-    unsigned int length;
-};
-
-#ifdef __s390x__
-#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
-#else
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-#endif
-
-#endif /* _ASMS390X_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
-- 
cgit v1.2.3


From 2ddddf3e0a55a7fcd6f240a7416cfcb12dd38b7e Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:01 +0200
Subject: [S390] Enable guest page hinting by default.

Get rid of the PAGE_STATES config option and enable guest page hinting
by default.
It can be disabled by specifying "cmma=off" at the command line.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig              | 7 -------
 arch/s390/include/asm/page.h   | 4 ----
 arch/s390/include/asm/system.h | 4 ----
 arch/s390/mm/Makefile          | 4 ++--
 arch/s390/mm/page-states.c     | 6 ++----
 5 files changed, 4 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 47836b945d0..e030e86ff6a 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -480,13 +480,6 @@ config CMM_IUCV
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.
 
-config PAGE_STATES
-	bool "Unused page notification"
-	help
-	  This enables the notification of unused pages to the
-	  hypervisor. The ESSA instruction is used to do the states
-	  changes between a page that has content and the unused state.
-
 config APPLDATA_BASE
 	bool "Linux - VM Monitor Stream, base infrastructure"
 	depends on PROC_FS
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 3e3594d01f8..5e9daf5d7f2 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -125,8 +125,6 @@ page_get_storage_key(unsigned long addr)
 	return skey;
 }
 
-#ifdef CONFIG_PAGE_STATES
-
 struct page;
 void arch_free_page(struct page *page, int order);
 void arch_alloc_page(struct page *page, int order);
@@ -134,8 +132,6 @@ void arch_alloc_page(struct page *page, int order);
 #define HAVE_ARCH_FREE_PAGE
 #define HAVE_ARCH_ALLOC_PAGE
 
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #define __PAGE_OFFSET           0x0UL
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 4fb83c1cdb7..379661d2f81 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -109,11 +109,7 @@ extern void pfault_fini(void);
 #define pfault_fini()		do { } while (0)
 #endif /* CONFIG_PFAULT */
 
-#ifdef CONFIG_PAGE_STATES
 extern void cmma_init(void);
-#else
-static inline void cmma_init(void) { }
-#endif
 
 #define finish_arch_switch(prev) do {					     \
 	set_fs(current->thread.mm_segment);				     \
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index db05661ac89..eec05448441 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux s390-specific parts of the memory manager.
 #
 
-obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
+obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o \
+	    page-states.o
 obj-$(CONFIG_CMM) += cmm.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PAGE_STATES) += page-states.o
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index fc0ad73ffd9..f92ec203ad9 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -1,6 +1,4 @@
 /*
- * arch/s390/mm/page-states.c
- *
  * Copyright IBM Corp. 2008
  *
  * Guest page hinting for unused pages.
@@ -17,11 +15,12 @@
 #define ESSA_SET_STABLE		1
 #define ESSA_SET_UNUSED		2
 
-static int cmma_flag;
+static int cmma_flag = 1;
 
 static int __init cmma(char *str)
 {
 	char *parm;
+
 	parm = strstrip(str);
 	if (strcmp(parm, "yes") == 0 || strcmp(parm, "on") == 0) {
 		cmma_flag = 1;
@@ -32,7 +31,6 @@ static int __init cmma(char *str)
 		return 1;
 	return 0;
 }
-
 __setup("cmma=", cmma);
 
 void __init cmma_init(void)
-- 
cgit v1.2.3


From 4bb5e07b68565d7983108993aa23eccf5f1b35fe Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:03 +0200
Subject: [S390] Limit cpu detection to 256 physical cpus.

Saves us more than 65k pointless IPIs.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/cpu.h | 6 ++++++
 arch/s390/kernel/head.S     | 1 +
 arch/s390/kernel/head64.S   | 8 +++-----
 arch/s390/kernel/smp.c      | 5 +++--
 4 files changed, 13 insertions(+), 7 deletions(-)
 create mode 100644 arch/s390/include/asm/cpu.h

(limited to 'arch')

diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
new file mode 100644
index 00000000000..702ad46841c
--- /dev/null
+++ b/arch/s390/include/asm/cpu.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_S390_CPU_H
+#define _ASM_S390_CPU_H
+
+#define MAX_CPU_ADDRESS 255
+
+#endif /* _ASM_S390_CPU_H */
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index ec688234852..c52b4f7742f 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -27,6 +27,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
+#include <asm/cpu.h>
 
 #ifdef CONFIG_64BIT
 #define ARCH_OFFSET	4
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index bdcb3f05bcd..6a250808092 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -62,9 +62,9 @@ startup_continue:
 	clr	%r11,%r12
 	je	5f			# no more space in prefix array
 4:
-	ahi	%r8,1				# next cpu (r8 += 1)
-	cl	%r8,.Llast_cpu-.LPG1(%r13)	# is last possible cpu ?
-	jl	1b				# jump if not last cpu
+	ahi	%r8,1			# next cpu (r8 += 1)
+	chi	%r8,MAX_CPU_ADDRESS	# is last possible cpu ?
+	jle	1b			# jump if not last cpu
 5:
 	lhi	%r1,2			# mode 2 = esame (dump)
 	j	6f
@@ -130,8 +130,6 @@ startup_continue:
 #ifdef CONFIG_ZFCPDUMP
 .Lcurrent_cpu:
 	.long 0x0
-.Llast_cpu:
-	.long 0x0000ffff
 .Lpref_arr_ptr:
 	.long zfcpdump_prefix_array
 #endif /* CONFIG_ZFCPDUMP */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index be2cae08340..9261495ca2c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -49,6 +49,7 @@
 #include <asm/sclp.h>
 #include <asm/cputime.h>
 #include <asm/vdso.h>
+#include <asm/cpu.h>
 #include "entry.h"
 
 static struct task_struct *current_set[NR_CPUS];
@@ -300,7 +301,7 @@ static int smp_rescan_cpus_sigp(cpumask_t avail)
 	logical_cpu = cpumask_first(&avail);
 	if (logical_cpu >= nr_cpu_ids)
 		return 0;
-	for (cpu_id = 0; cpu_id <= 65535; cpu_id++) {
+	for (cpu_id = 0; cpu_id <= MAX_CPU_ADDRESS; cpu_id++) {
 		if (cpu_known(cpu_id))
 			continue;
 		__cpu_logical_map[logical_cpu] = cpu_id;
@@ -379,7 +380,7 @@ static void __init smp_detect_cpus(void)
 	/* Use sigp detection algorithm if sclp doesn't work. */
 	if (sclp_get_cpu_info(info)) {
 		smp_use_sigp_detection = 1;
-		for (cpu = 0; cpu <= 65535; cpu++) {
+		for (cpu = 0; cpu <= MAX_CPU_ADDRESS; cpu++) {
 			if (cpu == boot_cpu_addr)
 				continue;
 			__cpu_logical_map[CPU_INIT_NO] = cpu;
-- 
cgit v1.2.3


From e86a6ed63f46fe8fb555fda531084bca3ef62fd7 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:04 +0200
Subject: [S390] Get rid of cpuid.h header file.

Merge cpuid.h header file into cpu.h.
While at it convert from typedef to struct declaration and also
convert cio code to use proper lowcore structure instead of casts.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/cpu.h       | 20 ++++++++++++++++++++
 arch/s390/include/asm/cpuid.h     | 25 -------------------------
 arch/s390/include/asm/kvm_host.h  |  6 +++---
 arch/s390/include/asm/lowcore.h   |  6 +++---
 arch/s390/include/asm/processor.h |  4 ++--
 5 files changed, 28 insertions(+), 33 deletions(-)
 delete mode 100644 arch/s390/include/asm/cpuid.h

(limited to 'arch')

diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
index 702ad46841c..471234b9057 100644
--- a/arch/s390/include/asm/cpu.h
+++ b/arch/s390/include/asm/cpu.h
@@ -1,6 +1,26 @@
+/*
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Hartmut Penner <hp@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Christian Ehrhardt <ehrhardt@de.ibm.com>,
+ */
+
 #ifndef _ASM_S390_CPU_H
 #define _ASM_S390_CPU_H
 
 #define MAX_CPU_ADDRESS 255
 
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct cpuid
+{
+	unsigned int version :	8;
+	unsigned int ident   : 24;
+	unsigned int machine : 16;
+	unsigned int unused  : 16;
+} __packed;
+
+#endif /* __ASSEMBLY__ */
 #endif /* _ASM_S390_CPU_H */
diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h
deleted file mode 100644
index 07836a2e522..00000000000
--- a/arch/s390/include/asm/cpuid.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *    Copyright IBM Corp. 2000,2009
- *    Author(s): Hartmut Penner <hp@de.ibm.com>,
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
- *		 Christian Ehrhardt <ehrhardt@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CPUID_H_
-#define _ASM_S390_CPUID_H_
-
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-typedef struct
-{
-	unsigned int version :	8;
-	unsigned int ident   : 24;
-	unsigned int machine : 16;
-	unsigned int unused  : 16;
-} __attribute__ ((packed)) cpuid_t;
-
-#endif /* _ASM_S390_CPUID_H_ */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 1cd02f6073a..698988f6940 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/kvm_host.h>
 #include <asm/debug.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
 
 #define KVM_MAX_VCPUS 64
 #define KVM_MEMORY_SLOTS 32
@@ -217,8 +217,8 @@ struct kvm_vcpu_arch {
 	struct hrtimer    ckc_timer;
 	struct tasklet_struct tasklet;
 	union  {
-		cpuid_t	  cpu_id;
-		u64	  stidp_data;
+		struct cpuid	cpu_id;
+		u64		stidp_data;
 	};
 };
 
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 5046ad6b7a6..6bc9426a6fb 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -132,7 +132,7 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
 #include <asm/ptrace.h>
 #include <linux/types.h>
 
@@ -275,7 +275,7 @@ struct _lowcore
 	__u32	user_exec_asce;			/* 0x02ac */
 
 	/* SMP info area */
-	cpuid_t	cpu_id;				/* 0x02b0 */
+	struct cpuid cpu_id;			/* 0x02b0 */
 	__u32	cpu_nr;				/* 0x02b8 */
 	__u32	softirq_pending;		/* 0x02bc */
 	__u32	percpu_offset;			/* 0x02c0 */
@@ -380,7 +380,7 @@ struct _lowcore
 	__u64	user_exec_asce;			/* 0x0318 */
 
 	/* SMP info area */
-	cpuid_t	cpu_id;				/* 0x0320 */
+	struct cpuid cpu_id;			/* 0x0320 */
 	__u32	cpu_nr;				/* 0x0328 */
 	__u32	softirq_pending;		/* 0x032c */
 	__u64	percpu_offset;			/* 0x0330 */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index c139fa7b8e8..cf8eed3fa77 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -14,7 +14,7 @@
 #define __ASM_S390_PROCESSOR_H
 
 #include <linux/linkage.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/setup.h>
@@ -26,7 +26,7 @@
  */
 #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
 
-static inline void get_cpu_id(cpuid_t *ptr)
+static inline void get_cpu_id(struct cpuid *ptr)
 {
 	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
 }
-- 
cgit v1.2.3


From 5c0b912e755caaad555eb6feefdb1124462d8f37 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:05 +0200
Subject: [S390] Remove smp_cpu_not_running.

smp_cpu_not_running() and cpu_stopped() are doing the same.
Remove one and also get rid of the last hard_smp_processor_id() leftover.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/smp.h | 32 +-------------------------------
 arch/s390/kernel/smp.c      | 34 +++++++++++++++++++---------------
 2 files changed, 20 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 72137bc907a..c991fe6473c 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -51,32 +51,7 @@ extern void machine_power_off_smp(void);
 #define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
 
 #define raw_smp_processor_id()	(S390_lowcore.cpu_nr)
-
-/*
- * returns 1 if cpu is in stopped/check stopped state or not operational
- * returns 0 otherwise
- */
-static inline int
-smp_cpu_not_running(int cpu)
-{
-	__u32 status;
-
-	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
-	case sigp_order_code_accepted:
-	case sigp_status_stored:
-		/* Check for stopped and check stop state */
-		if (status & 0x50)
-			return 1;
-		break;
-	case sigp_not_operational:
-		return 1;
-	default:
-		break;
-	}
-	return 0;
-}
-
-#define cpu_logical_map(cpu) (cpu)
+#define cpu_logical_map(cpu)	(cpu)
 
 extern int __cpu_disable (void);
 extern void __cpu_die (unsigned int cpu);
@@ -91,11 +66,6 @@ extern void arch_send_call_function_ipi(cpumask_t mask);
 
 #endif
 
-#ifndef CONFIG_SMP
-#define hard_smp_processor_id()		0
-#define smp_cpu_not_running(cpu)	1
-#endif
-
 #ifdef CONFIG_HOTPLUG_CPU
 extern int smp_rescan_cpus(void);
 #else
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 9261495ca2c..56c16876b91 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -71,6 +71,23 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 static void smp_ext_bitcall(int, ec_bit_sig);
 
+static int cpu_stopped(int cpu)
+{
+	__u32 status;
+
+	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+	case sigp_order_code_accepted:
+	case sigp_status_stored:
+		/* Check for stopped and check stop state */
+		if (status & 0x50)
+			return 1;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
 void smp_send_stop(void)
 {
 	int cpu, rc;
@@ -87,7 +104,7 @@ void smp_send_stop(void)
 			rc = signal_processor(cpu, sigp_stop);
 		} while (rc == sigp_busy);
 
-		while (!smp_cpu_not_running(cpu))
+		while (!cpu_stopped(cpu))
 			cpu_relax();
 	}
 }
@@ -270,19 +287,6 @@ static inline void smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) { }
 
 #endif /* CONFIG_ZFCPDUMP */
 
-static int cpu_stopped(int cpu)
-{
-	__u32 status;
-
-	/* Check for stopped state */
-	if (signal_processor_ps(&status, 0, cpu, sigp_sense) ==
-	    sigp_status_stored) {
-		if (status & 0x40)
-			return 1;
-	}
-	return 0;
-}
-
 static int cpu_known(int cpu_id)
 {
 	int cpu;
@@ -636,7 +640,7 @@ int __cpu_disable(void)
 void __cpu_die(unsigned int cpu)
 {
 	/* Wait until target cpu is down */
-	while (!smp_cpu_not_running(cpu))
+	while (!cpu_stopped(cpu))
 		cpu_relax();
 	smp_free_lowcore(cpu);
 	pr_info("Processor %d stopped\n", cpu);
-- 
cgit v1.2.3


From bde69af2ab696eebfac9583ea1e8a46b571e317f Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:06 +0200
Subject: [S390] Wire up page fault events for software perf counters.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/fault.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index e5e119fe03b..1abbadd497e 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -10,6 +10,7 @@
  *    Copyright (C) 1995  Linus Torvalds
  */
 
+#include <linux/perf_counter.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -305,7 +306,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int write)
 	 * interrupts again and then search the VMAs
 	 */
 	local_irq_enable();
-
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 	down_read(&mm->mmap_sem);
 
 	si_code = SEGV_MAPERR;
@@ -363,11 +364,15 @@ good_area:
 		}
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
-
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
         up_read(&mm->mmap_sem);
 	/*
 	 * The instruction that caused the program check will
-- 
cgit v1.2.3


From 52a7a1cec88acdaf3f8b36a6b1fe904f6eca7ee5 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 10 Sep 2009 15:26:30 +0200
Subject: [ARM] pxafb: add accelerator ID for PXA3xx GCU

Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer
conditionally, depending on a new flag in struct pxafb_mach_info.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Dennis Oliver Kropp <dok@directfb.org>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/pxafb.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 6932720ba04..f73061c90b5 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -118,7 +118,8 @@ struct pxafb_mach_info {
 	u_int		fixed_modes:1,
 			cmap_inverse:1,
 			cmap_static:1,
-			unused:29;
+			acceleration_enabled:1,
+			unused:28;
 
 	/* The following should be defined in LCCR0
 	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-- 
cgit v1.2.3


From e517a5e97080bbe52857bd0d7df9b66602d53c4d Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Thu, 10 Sep 2009 17:48:48 -0700
Subject: agp/intel: Fix the pre-9xx chipset flush.

Ever since we enabled GEM, the pre-9xx chipsets (particularly 865) have had
serious stability issues.  Back in May a wbinvd was added to the DRM to
work around much of the problem.  Some failure remained -- easily visible
by dragging a window around on an X -retro desktop, or by looking at bugzilla.

The chipset flush was on the right track -- hitting the right amount of
memory, and it appears to be the only way to flush on these chipsets, but the
flush page was mapped uncached.  As a result, the writes trying to clear the
writeback cache ended up bypassing the cache, and not flushing anything!  The
wbinvd would flush out other writeback data and often cause the data we wanted
to get flushed, but not always.  By removing the setting of the page to UC
and instead just clflushing the data we write to try to flush it, we get the
desired behavior with no wbinvd.

This exports clflush_cache_range(), which was laying around and happened to
basically match the code I was otherwise going to copy from the DRM.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Cc: stable@kernel.org
---
 arch/x86/mm/pageattr.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7e600c1962d..5866b28eede 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -143,6 +143,7 @@ void clflush_cache_range(void *vaddr, unsigned int size)
 
 	mb();
 }
+EXPORT_SYMBOL_GPL(clflush_cache_range);
 
 static void __cpa_flush_all(void *arg)
 {
-- 
cgit v1.2.3


From b7cfda9fc3d7aa60cffab5367f2a72a4a70060cd Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 7 Sep 2009 15:06:42 +0100
Subject: ARM: Fix pfn_valid() for sparse memory

On OMAP platforms, some people want to declare to segment up the memory
between the kernel and a separate application such that there is a hole
in the middle of the memory as far as Linux is concerned.  However,
they want to be able to mmap() the hole.

This currently causes problems, because update_mmu_cache() thinks that
there are valid struct pages for the "hole".  Fix this by making
pfn_valid() slightly more expensive, by checking whether the PFN is
contained within the meminfo array.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Khasim Syed Mohammed <khasim@ti.com>
---
 arch/arm/include/asm/memory.h | 17 -----------------
 arch/arm/include/asm/page.h   |  4 ++++
 arch/arm/mm/init.c            | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..b3b54c6216a 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -212,7 +212,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
  *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *  pfn_valid(pfn)	indicates whether a PFN number is valid
  *
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
@@ -221,10 +220,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
@@ -241,18 +236,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
 #define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
 
-#define pfn_valid(pfn)						\
-	({							\
-		unsigned int nid = PFN_TO_NID(pfn);		\
-		int valid = nid < MAX_NUMNODES;			\
-		if (valid) {					\
-			pg_data_t *node = NODE_DATA(nid);	\
-			valid = (pfn - node->node_start_pfn) <	\
-				node->node_spanned_pages;	\
-		}						\
-		valid;						\
-	})
-
 #define virt_to_page(kaddr)					\
 	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
 
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 9c746af1bf6..3a32af4cce3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -194,6 +194,10 @@ typedef unsigned long pgprot_t;
 
 typedef struct page *pgtable_t;
 
+#ifndef CONFIG_SPARSEMEM
+extern int pfn_valid(unsigned long);
+#endif
+
 #include <asm/memory.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3a7279c1ce5..ea36186f32c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
+#include <linux/sort.h>
 #include <linux/highmem.h>
 
 #include <asm/mach-types.h>
@@ -349,12 +350,43 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	free_area_init_node(node, zone_size, min, zhole_size);
 }
 
+#ifndef CONFIG_SPARSEMEM
+int pfn_valid(unsigned long pfn)
+{
+	struct meminfo *mi = &meminfo;
+	unsigned int left = 0, right = mi->nr_banks;
+
+	do {
+		unsigned int mid = (right + left) / 2;
+		struct membank *bank = &mi->bank[mid];
+
+		if (pfn < bank_pfn_start(bank))
+			right = mid;
+		else if (pfn >= bank_pfn_end(bank))
+			left = mid + 1;
+		else
+			return 1;
+	} while (left < right);
+	return 0;
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
 	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
+	sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
+
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
-- 
cgit v1.2.3


From f17a1f06d2fa93f4825be572622eb02c4894db4e Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 4 Aug 2009 01:01:02 +0100
Subject: ARM: 5636/1: Move vendor enum to AMBA include

This moves the primecell vendor enum definition inside vic.c
out to linux/amba/bus.h where it belongs and replace any
occurances of specific vendor ID:s with the respective enums
instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index bc1f9ad61ff..920ced0b73c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -272,11 +273,6 @@ static struct irq_chip vic_chip = {
 static void vik_init_st(void __iomem *base, unsigned int irq_start,
 			 u32 vic_sources);
 
-enum vic_vendor {
-	VENDOR_ARM = 0x41,
-	VENDOR_ST = 0x80,
-};
-
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -289,7 +285,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 {
 	unsigned int i;
 	u32 cellid = 0;
-	enum vic_vendor vendor;
+	enum amba_vendor vendor;
 
 	/* Identify which VIC cell this one is, by reading the ID */
 	for (i = 0; i < 4; i++) {
@@ -301,13 +297,13 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	       base, cellid, vendor);
 
 	switch(vendor) {
-	case VENDOR_ST:
+	case AMBA_VENDOR_ST:
 		vik_init_st(base, irq_start, vic_sources);
 		return;
 	default:
 		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
 		/* fall through */
-	case VENDOR_ARM:
+	case AMBA_VENDOR_ARM:
 		break;
 	}
 
-- 
cgit v1.2.3


From c1cb6b7fb5190ad55b31aa3289d48fedd288ddaa Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 12 Sep 2009 12:00:17 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 68 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 200d83a9828..c8c55b46934 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Aug 1 16:26:02 2009
+# Last update: Sat Sep 12 12:00:16 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1962,7 +1962,7 @@ ethernut5		MACH_ETHERNUT5		ETHERNUT5		1971
 arm11			MACH_ARM11		ARM11			1972
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
 cpupxa255		MACH_CPUPXA255		CPUPXA255		1974
-cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
 cheflux			MACH_CHEFLUX		CHEFLUX			1976
 eb_cpux9k2		MACH_EB_CPUX9K2		EB_CPUX9K2		1977
 opcotec			MACH_OPCOTEC		OPCOTEC			1978
@@ -2249,14 +2249,14 @@ omap3_phrazer		MACH_OMAP3_PHRAZER	OMAP3_PHRAZER		2261
 darwin			MACH_DARWIN		DARWIN			2262
 oratiscomu		MACH_ORATISCOMU		ORATISCOMU		2263
 rtsbc20			MACH_RTSBC20		RTSBC20			2264
-i780			MACH_I780		I780			2265
+sgh_i780		MACH_I780		I780			2265
 gemini324		MACH_GEMINI324		GEMINI324		2266
 oratislan		MACH_ORATISLAN		ORATISLAN		2267
 oratisalog		MACH_ORATISALOG		ORATISALOG		2268
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2p_ca9			MACH_V2P_CA9		V2P_CA9			2272
+v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2349,3 +2349,63 @@ openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
 hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
 wayland			MACH_WAYLAND		WAYLAND			2363
 acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
+hwat91			MACH_HWAT91		HWAT91			2365
+at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
+csb732			MACH_CSB732		CSB732			2367
+u8500			MACH_U8500		U8500			2368
+huqiu			MACH_HUQIU		HUQIU			2369
+mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+pmt1g			MACH_PMT1G		PMT1G			2371
+htcelf			MACH_HTCELF		HTCELF			2372
+armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
+armadillo440		MACH_ARMADILLO440	ARMADILLO440		2374
+u_chip_dual_arm		MACH_U_CHIP_DUAL_ARM	U_CHIP_DUAL_ARM		2375
+csr_bdb3		MACH_CSR_BDB3		CSR_BDB3		2376
+dolby_cat1018		MACH_DOLBY_CAT1018	DOLBY_CAT1018		2377
+hy9307			MACH_HY9307		HY9307			2378
+aspire_easystore	MACH_A_ES		A_ES			2379
+davinci_irif		MACH_DAVINCI_IRIF	DAVINCI_IRIF		2380
+agama9263		MACH_AGAMA9263		AGAMA9263		2381
+marvell_jasper		MACH_MARVELL_JASPER	MARVELL_JASPER		2382
+flint			MACH_FLINT		FLINT			2383
+tavorevb3		MACH_TAVOREVB3		TAVOREVB3		2384
+sch_m490		MACH_SCH_M490		SCH_M490		2386
+rbl01			MACH_RBL01		RBL01			2387
+omnifi			MACH_OMNIFI		OMNIFI			2388
+otavalo			MACH_OTAVALO		OTAVALO			2389
+sienna			MACH_SIENNA		SIENNA			2390
+htc_excalibur_s620	MACH_HTC_EXCALIBUR_S620	HTC_EXCALIBUR_S620	2391
+htc_opal		MACH_HTC_OPAL		HTC_OPAL		2392
+touchbook		MACH_TOUCHBOOK		TOUCHBOOK		2393
+latte			MACH_LATTE		LATTE			2394
+xa200			MACH_XA200		XA200			2395
+nimrod			MACH_NIMROD		NIMROD			2396
+cc9p9215_3g		MACH_CC9P9215_3G	CC9P9215_3G		2397
+cc9p9215_3gjs		MACH_CC9P9215_3GJS	CC9P9215_3GJS		2398
+tk71			MACH_TK71		TK71			2399
+comham3525		MACH_COMHAM3525		COMHAM3525		2400
+mx31erebus		MACH_MX31EREBUS		MX31EREBUS		2401
+mcardmx27		MACH_MCARDMX27		MCARDMX27		2402
+paradise		MACH_PARADISE		PARADISE		2403
+tide			MACH_TIDE		TIDE			2404
+wzl2440			MACH_WZL2440		WZL2440			2405
+sdrdemo			MACH_SDRDEMO		SDRDEMO			2406
+ethercan2		MACH_ETHERCAN2		ETHERCAN2		2407
+ecmimg20		MACH_ECMIMG20		ECMIMG20		2408
+omap_dragon		MACH_OMAP_DRAGON	OMAP_DRAGON		2409
+halo			MACH_HALO		HALO			2410
+huangshan		MACH_HUANGSHAN		HUANGSHAN		2411
+vl_ma2sc		MACH_VL_MA2SC		VL_MA2SC		2412
+raumfeld_rc		MACH_RAUMFELD_RC	RAUMFELD_RC		2413
+raumfeld_connector	MACH_RAUMFELD_CONNECTOR	RAUMFELD_CONNECTOR	2414
+raumfeld_speaker	MACH_RAUMFELD_SPEAKER	RAUMFELD_SPEAKER	2415
+multibus_master		MACH_MULTIBUS_MASTER	MULTIBUS_MASTER		2416
+multibus_pbk		MACH_MULTIBUS_PBK	MULTIBUS_PBK		2417
+tnetv107x		MACH_TNETV107X		TNETV107X		2418
+snake			MACH_SNAKE		SNAKE			2419
+cwmx27			MACH_CWMX27		CWMX27			2420
+sch_m480		MACH_SCH_M480		SCH_M480		2421
+platypus		MACH_PLATYPUS		PLATYPUS		2422
+pss2			MACH_PSS2		PSS2			2423
+davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
+str9100			MACH_STR9100		STR9100			2425
-- 
cgit v1.2.3


From 4818d80942b7c0021d213b7c5f1a14a832820a01 Mon Sep 17 00:00:00 2001
From: Jiri Olsa <jolsa@redhat.com>
Date: Wed, 29 Jul 2009 10:58:37 +0200
Subject: tracing/function-graph: x86_64 stack allocation cleanup

Only 24 bytes needs to be reserved on the stack for the function graph
tracer on x86_64.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20090729085837.GB4998@jolsa.lab.eng.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/entry_64.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index c251be74510..d59fe323807 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -146,7 +146,7 @@ ENTRY(ftrace_graph_caller)
 END(ftrace_graph_caller)
 
 GLOBAL(return_to_handler)
-	subq  $80, %rsp
+	subq  $24, %rsp
 
 	/* Save the return values */
 	movq %rax, (%rsp)
@@ -155,10 +155,10 @@ GLOBAL(return_to_handler)
 
 	call ftrace_return_to_handler
 
-	movq %rax, 72(%rsp)
+	movq %rax, 16(%rsp)
 	movq 8(%rsp), %rdx
 	movq (%rsp), %rax
-	addq $72, %rsp
+	addq $16, %rsp
 	retq
 #endif
 
-- 
cgit v1.2.3


From 2fd5a021071ef54c503ab8d9894acae3eccf4f92 Mon Sep 17 00:00:00 2001
From: Rafael Ignacio Zurita <rizurita@yahoo.com>
Date: Mon, 14 Sep 2009 03:01:58 +0000
Subject: sh: clkfwk: remove bogus set_bus_parent() from SH7709.

This fixes up broken clock re-parenting undertaken by the SH7709 clock
framework code, which is currently in conflict with the legacy CPG
framework. With this change in place, the legacy CPG ancestry is used,
and we manage to avoid contending on the clock_list_sem mutex, which is
already held under the legacy registration path, resulting in livelock.

In order for SH7709 to fully support the varying clock modes, it needs to
implement a more complete clock framework. After this change it is in
sync with legacy CPG mode, which ends up being the default configuration
for this CPU anyways.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh3/clock-sh7709.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
index fa30b601773..e8749505bd2 100644
--- a/arch/sh/kernel/cpu/sh3/clock-sh7709.c
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -22,13 +22,6 @@ static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
 static int ifc_divisors[]    = { 1, 2, 4, 1, 3, 1, 1, 1 };
 static int pfc_divisors[]    = { 1, 2, 4, 1, 3, 6, 1, 1 };
 
-static void set_bus_parent(struct clk *clk)
-{
-	struct clk *bus_clk = clk_get(NULL, "bus_clk");
-	clk->parent = bus_clk;
-	clk_put(bus_clk);
-}
-
 static void master_clk_init(struct clk *clk)
 {
 	int frqcr = ctrl_inw(FRQCR);
@@ -50,9 +43,6 @@ static unsigned long module_clk_recalc(struct clk *clk)
 }
 
 static struct clk_ops sh7709_module_clk_ops = {
-#ifdef CLOCK_MODE_0_1_2_7
-	.init		= set_bus_parent,
-#endif
 	.recalc		= module_clk_recalc,
 };
 
@@ -78,7 +68,6 @@ static unsigned long cpu_clk_recalc(struct clk *clk)
 }
 
 static struct clk_ops sh7709_cpu_clk_ops = {
-	.init		= set_bus_parent,
 	.recalc		= cpu_clk_recalc,
 };
 
-- 
cgit v1.2.3


From 3639dfb57d39747a3069678237e8ab810525fcb0 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 14 Sep 2009 17:29:35 +0900
Subject: sh: multi-evt support for SH-X3 proto CPU.

This adds support for multiple vectors per unique IRQ masking source on
the SH-X3 proto CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-shx3.c | 55 +++++++++++++-----------------------
 1 file changed, 20 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 07f078961c7..e848443deeb 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -268,11 +268,7 @@ enum {
 	UNUSED = 0,
 
 	/* interrupt sources */
-	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
-	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
-	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
-	IRL_HHLL, IRL_HHLH, IRL_HHHL,
-	IRQ0, IRQ1, IRQ2, IRQ3,
+	IRL, IRQ0, IRQ1, IRQ2, IRQ3,
 	HUDII,
 	TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
 	PCII0, PCII1, PCII2, PCII3, PCII4,
@@ -287,10 +283,7 @@ enum {
 	DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
 	DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
 	IIC, VIN0, VIN1, VCORE0, ATAPI,
-	DTU0_TEND, DTU0_AE, DTU0_TMISS,
-	DTU1_TEND, DTU1_AE, DTU1_TMISS,
-	DTU2_TEND, DTU2_AE, DTU2_TMISS,
-	DTU3_TEND, DTU3_AE, DTU3_TMISS,
+	DTU0, DTU1, DTU2, DTU3,
 	FE0, FE1,
 	GPIO0, GPIO1, GPIO2, GPIO3,
 	PAM, IRM,
@@ -298,8 +291,8 @@ enum {
 	INTICI4, INTICI5, INTICI6, INTICI7,
 
 	/* interrupt groups */
-	IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
-	DMAC0, DMAC1, DTU0, DTU1, DTU2, DTU3,
+	PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
+	DMAC0, DMAC1,
 };
 
 static struct intc_vect vectors[] __initdata = {
@@ -332,14 +325,14 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(IIC, 0xae0),
 	INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20),
 	INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60),
-	INTC_VECT(DTU0_TEND, 0xc00), INTC_VECT(DTU0_AE, 0xc20),
-	INTC_VECT(DTU0_TMISS, 0xc40),
-	INTC_VECT(DTU1_TEND, 0xc60), INTC_VECT(DTU1_AE, 0xc80),
-	INTC_VECT(DTU1_TMISS, 0xca0),
-	INTC_VECT(DTU2_TEND, 0xcc0), INTC_VECT(DTU2_AE, 0xce0),
-	INTC_VECT(DTU2_TMISS, 0xd00),
-	INTC_VECT(DTU3_TEND, 0xd20), INTC_VECT(DTU3_AE, 0xd40),
-	INTC_VECT(DTU3_TMISS, 0xd60),
+	INTC_VECT(DTU0, 0xc00), INTC_VECT(DTU0, 0xc20),
+	INTC_VECT(DTU0, 0xc40),
+	INTC_VECT(DTU1, 0xc60), INTC_VECT(DTU1, 0xc80),
+	INTC_VECT(DTU1, 0xca0),
+	INTC_VECT(DTU2, 0xcc0), INTC_VECT(DTU2, 0xce0),
+	INTC_VECT(DTU2, 0xd00),
+	INTC_VECT(DTU3, 0xd20), INTC_VECT(DTU3, 0xd40),
+	INTC_VECT(DTU3, 0xd60),
 	INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20),
 	INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
 	INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0),
@@ -351,10 +344,6 @@ static struct intc_vect vectors[] __initdata = {
 };
 
 static struct intc_group groups[] __initdata = {
-	INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
-		   IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
-		   IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
-		   IRL_HHLL, IRL_HHLH, IRL_HHHL),
 	INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
 	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
 	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
@@ -364,10 +353,6 @@ static struct intc_group groups[] __initdata = {
 		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
 	INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
 		   DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
-	INTC_GROUP(DTU0, DTU0_TEND, DTU0_AE, DTU0_TMISS),
-	INTC_GROUP(DTU1, DTU1_TEND, DTU1_AE, DTU1_TMISS),
-	INTC_GROUP(DTU2, DTU2_TEND, DTU2_AE, DTU2_TMISS),
-	INTC_GROUP(DTU3, DTU3_TEND, DTU3_AE, DTU3_TMISS),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
@@ -434,14 +419,14 @@ static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups,
 
 /* External interrupt pins in IRL mode */
 static struct intc_vect vectors_irl[] __initdata = {
-	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
-	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
-	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
-	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
-	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
-	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
-	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
-	INTC_VECT(IRL_HHHL, 0x3c0),
+	INTC_VECT(IRL, 0x200), INTC_VECT(IRL, 0x220),
+	INTC_VECT(IRL, 0x240), INTC_VECT(IRL, 0x260),
+	INTC_VECT(IRL, 0x280), INTC_VECT(IRL, 0x2a0),
+	INTC_VECT(IRL, 0x2c0), INTC_VECT(IRL, 0x2e0),
+	INTC_VECT(IRL, 0x300), INTC_VECT(IRL, 0x320),
+	INTC_VECT(IRL, 0x340), INTC_VECT(IRL, 0x360),
+	INTC_VECT(IRL, 0x380), INTC_VECT(IRL, 0x3a0),
+	INTC_VECT(IRL, 0x3c0),
 };
 
 static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
-- 
cgit v1.2.3


From 549d042df240dfb4203bab40ad44f9336751b7d6 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Fri, 24 Jul 2009 13:51:42 +0200
Subject: x86, mce: pass mce info to EDAC for decoding

Move NB decoder along with required defines to EDAC MCE core. Add
registration routines for further decoding of the MCE info in the AMD64
EDAC module.

CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 01213048f62..b82866f6adf 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -183,6 +183,11 @@ void mce_log(struct mce *mce)
 	set_bit(0, &mce_need_notify);
 }
 
+void __weak decode_mce(struct mce *m)
+{
+	return;
+}
+
 static void print_mce(struct mce *m)
 {
 	printk(KERN_EMERG
@@ -205,6 +210,8 @@ static void print_mce(struct mce *m)
 	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
 			m->cpuvendor, m->cpuid, m->time, m->socketid,
 			m->apicid);
+
+	decode_mce(m);
 }
 
 static void print_mce_head(void)
-- 
cgit v1.2.3


From 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Tue, 28 Jul 2009 14:47:10 +0200
Subject: x86, mce: do not compile mcelog message on AMD

Now that decoding is done in-kernel, suppress mcelog message part.

CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index b82866f6adf..9bfe9d2ea61 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -222,7 +222,10 @@ static void print_mce_head(void)
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n"
+#endif
+	       );
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
-- 
cgit v1.2.3


From e34e77ce348feac3c8c607774efb1f8a9262127d Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Mon, 14 Sep 2009 20:52:25 +0200
Subject: x86, mce: Fix compilation with !CONFIG_DEBUG_FS in mce-severity.c

Fix compilation error in arch/x86/kernel/cpu/mcheck/mce-severity.c
when CONFIG_DEBUG_FS is disabled, introduced in commit
5be9ed251f58881dfc3dd6742a81ff9ad1a7bb04.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce-severity.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index bc35a073d15..8a85dd1b1aa 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -139,6 +139,7 @@ int mce_severity(struct mce *a, int tolerant, char **msg)
 	}
 }
 
+#ifdef CONFIG_DEBUG_FS
 static void *s_start(struct seq_file *f, loff_t *pos)
 {
 	if (*pos >= ARRAY_SIZE(severities))
@@ -212,3 +213,4 @@ err_out:
 	return -ENOMEM;
 }
 late_initcall(severities_debugfs_init);
+#endif
-- 
cgit v1.2.3


From 4295ab34883d2070b1145e14f4619478e9788807 Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <[seto.hidetoshi@jp.fujitsu.com]>
Date: Thu, 6 Aug 2009 14:51:56 -0700
Subject: [IA64] kdump: Mask MCA/INIT on frozen cpus

Summary:

  INIT asserted on kdump kernel invokes INIT handler not only on a
  cpu that running on the kdump kernel, but also BSP of the panicked
  kernel, because the (badly) frozen BSP can be thawed by INIT.

Description:

  The kdump_cpu_freeze() is called on cpus except one that initiates
  panic and/or kdump, to stop/offline the cpu (on ia64, it means we
  pass control of cpus to SAL, or put them in spinloop).  Note that
  CPU0(BSP) always go to spinloop, so if panic was happened on an AP,
  there are at least 2cpus (= the AP and BSP) which not back to SAL.

  On the spinning cpus, interrupts are disabled (rsm psr.i), but INIT
  is still interruptible because psr.mc for mask them is not set unless
  kdump_cpu_freeze() is not called from MCA/INIT context.

  Therefore, assume that a panic was happened on an AP, kdump was
  invoked, new INIT handlers for kdump kernel was registered and then
  an INIT is asserted.  From the viewpoint of SAL, there are 2 online
  cpus, so INIT will be delivered to both of them.  It likely means
  that not only the AP (= a cpu executing kdump) enters INIT handler
  which is newly registered, but also BSP (= another cpu spinning in
  panicked kernel) enters the same INIT handler.  Of course setting of
  registers in BSP are still old (for panicked kernel), so what happen
  with running handler with wrong setting will be extremely unexpected.
  I believe this is not desirable behavior.

How to Reproduce:

  Start kdump on one of APs (e.g. cpu1)
    # taskset 0x2 echo c > /proc/sysrq-trigger
  Then assert INIT after kdump kernel is booted, after new INIT handler
  for kdump kernel is registered.

Expected results:

  An INIT handler is invoked only on the AP.

Actual results:

  An INIT handler is invoked on the AP and BSP.

Sample of results:

  I got following console log by asserting INIT after prompt "root:/>".
  It seems that two monarchs appeared by one INIT, and one panicked at
  last.  And it also seems that the panicked one supposed there were
  4 online cpus and no one did rendezvous:

    :
    [  0 %]dropping to initramfs shell
    exiting this shell will reboot your system
    root:/> Entered OS INIT handler. PSP=fff301a0 cpu=0 monarch=0
    ia64_init_handler: Promoting cpu 0 to monarch.
    Delaying for 5 seconds...
    All OS INIT slaves have reached rendezvous
    Processes interrupted by INIT - 0 (cpu 0 task 0xa000000100af0000)
    :
    <<snip>>
    :
    Entered OS INIT handler. PSP=fff301a0 cpu=0 monarch=1
    Delaying for 5 seconds...
    mlogbuf_finish: printing switched to urgent mode, MCA/INIT might be dodgy or fail.
    OS INIT slave did not rendezvous on cpu 1 2 3
    INIT swapper 0[0]: bugcheck! 0 [1]
    :
    <<snip>>
    :
    Kernel panic - not syncing: Attempted to kill the idle task!

Proposed fix:

  To avoid this problem, this patch inserts ia64_set_psr_mc() to mask
  INIT on cpus going to be frozen.  This masking have no effect if the
  kdump_cpu_freeze() is called from INIT handler when kdump_on_init == 1,
  because psr.mc is already turned on to 1 before entering OS_INIT.
  I confirmed that weird log like above are disappeared after applying
  this patch.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/mca.h |  1 +
 arch/ia64/kernel/crash.c    |  4 ++++
 arch/ia64/kernel/head.S     |  2 +-
 arch/ia64/kernel/mca_asm.S  | 27 +++++++++++++++++++++++++++
 4 files changed, 33 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h
index 44a0b53df90..cb0952f5183 100644
--- a/arch/ia64/include/asm/mca.h
+++ b/arch/ia64/include/asm/mca.h
@@ -151,6 +151,7 @@ extern void ia64_mca_cmc_vector_setup(void);
 extern int  ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *));
 extern void ia64_unreg_MCA_extension(void);
 extern unsigned long ia64_get_rnat(unsigned long *);
+extern void ia64_set_psr_mc(void);
 extern void ia64_mca_printk(const char * fmt, ...)
 	 __attribute__ ((format (printf, 1, 2)));
 
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index f065093f8e9..3f3a5797d19 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -129,10 +129,14 @@ void
 kdump_cpu_freeze(struct unw_frame_info *info, void *arg)
 {
 	int cpuid;
+
 	local_irq_disable();
 	cpuid = smp_processor_id();
 	crash_save_this_cpu();
 	current->thread.ksp = (__u64)info->sw - 16;
+
+	ia64_set_psr_mc();	/* mask MCA/INIT and stop reentrance */
+
 	atomic_inc(&kdump_cpu_frozen);
 	kdump_status[cpuid] = 1;
 	mb();
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 23f846de62d..e1f97ac9eef 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -1242,7 +1242,7 @@ GLOBAL_ENTRY(ia64_jump_to_sal)
 	movl r16=SAL_PSR_BITS_TO_SET;;
 	mov cr.ipsr=r16
 	mov cr.ifs=r0;;
-	rfi;;
+	rfi;;			// note: this unmask MCA/INIT (psr.mc)
 1:
 	/*
 	 * Invalidate all TLB data/inst
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index a06d46548ff..8d2eabe3119 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -1073,3 +1073,30 @@ GLOBAL_ENTRY(ia64_get_rnat)
 	mov ar.rsc=3
 	br.ret.sptk.many rp
 END(ia64_get_rnat)
+
+
+// void ia64_set_psr_mc(void)
+//
+// Set psr.mc bit to mask MCA/INIT.
+GLOBAL_ENTRY(ia64_set_psr_mc)
+	rsm psr.i | psr.ic		// disable interrupts
+	;;
+	srlz.d
+	;;
+	mov r14 = psr			// get psr{36:35,31:0}
+	movl r15 = 1f
+	;;
+	dep r14 = -1, r14, PSR_MC, 1	// set psr.mc
+	;;
+	dep r14 = -1, r14, PSR_IC, 1	// set psr.ic
+	;;
+	dep r14 = -1, r14, PSR_BN, 1	// keep bank1 in use
+	;;
+	mov cr.ipsr = r14
+	mov cr.ifs = r0
+	mov cr.iip = r15
+	;;
+	rfi
+1:
+	br.ret.sptk.many rp
+END(ia64_set_psr_mc)
-- 
cgit v1.2.3


From 07a6a4ae827b54cec4c1b1d92bed1cc9176b45ec Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <[seto.hidetoshi@jp.fujitsu.com]>
Date: Thu, 6 Aug 2009 14:51:56 -0700
Subject: [IA64] kexec: Make INIT safe while transition to

kdump/kexec kernel

Summary:

  Asserting INIT on the beginning of kdump/kexec kernel will result
  in unexpected behavior because INIT handler for previous kernel is
  invoked on new kernel.

Description:

  In panic situation, we can receive INIT while kernel transition,
  i.e. from beginning of panic to bootstrap of kdump kernel.
  Since we initialize registers on leave from current kernel, no
  longer monarch/slave handlers of current kernel in virtual mode are
  called safely.  (In fact system goes hang as far as I confirmed)

How to Reproduce:

  Start kdump
    # echo c > /proc/sysrq-trigger
  Then assert INIT while kdump kernel is booting, before new INIT
  handler for kdump kernel is registered.

Expected(Desirable) result:

  kdump kernel boots without any problem, crashdump retrieved

Actual result:

  INIT handler for previous kernel is invoked on kdump kernel
  => panic, hang etc. (unexpected)

Proposed fix:

  We can unregister these init handlers from SAL before jumping into
  new kernel, however then the INIT will fallback to default behavior,
  result in warmboot by SAL (according to the SAL specification) and
  we cannot retrieve the crashdump.

  Therefore this patch introduces a NOP init handler and register it
  to SAL before leave from current kernel, to start kdump safely by
  preventing INITs from entering virtual mode and resulting in warmboot.

  On the other hand, in case of kexec that not for kdump, it also
  has same problem with INIT while kernel transition.
  This patch handles this case differently, because for kexec
  unregistering handlers will be preferred than registering NOP
  handler, since the situation "no handlers registered" is usual
  state for kernel's entry.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/mca.h      |  1 +
 arch/ia64/kernel/machine_kexec.c | 12 ++++++++++++
 arch/ia64/kernel/mca_asm.S       | 20 ++++++++++++++++++++
 3 files changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h
index cb0952f5183..c171cdf0a78 100644
--- a/arch/ia64/include/asm/mca.h
+++ b/arch/ia64/include/asm/mca.h
@@ -145,6 +145,7 @@ extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *);
 extern void ia64_init_handler(struct pt_regs *,
 			      struct switch_stack *,
 			      struct ia64_sal_os_state *);
+extern void ia64_os_init_on_kdump(void);
 extern void ia64_monarch_init_handler(void);
 extern void ia64_slave_init_handler(void);
 extern void ia64_mca_cmc_vector_setup(void);
diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c
index 0823de1f6eb..571d66373e0 100644
--- a/arch/ia64/kernel/machine_kexec.c
+++ b/arch/ia64/kernel/machine_kexec.c
@@ -24,6 +24,8 @@
 #include <asm/delay.h>
 #include <asm/meminit.h>
 #include <asm/processor.h>
+#include <asm/sal.h>
+#include <asm/mca.h>
 
 typedef NORET_TYPE void (*relocate_new_kernel_t)(
 					unsigned long indirection_page,
@@ -85,11 +87,21 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg)
 	void *pal_addr = efi_get_pal_addr();
 	unsigned long code_addr = (unsigned long)page_address(image->control_code_page);
 	int ii;
+	u64 fp, gp;
+	ia64_fptr_t *init_handler = (ia64_fptr_t *)ia64_os_init_on_kdump;
 
 	BUG_ON(!image);
 	if (image->type == KEXEC_TYPE_CRASH) {
 		crash_save_this_cpu();
 		current->thread.ksp = (__u64)info->sw - 16;
+
+		/* Register noop init handler */
+		fp = ia64_tpa(init_handler->fp);
+		gp = ia64_tpa(ia64_getreg(_IA64_REG_GP));
+		ia64_sal_set_vectors(SAL_VECTOR_OS_INIT, fp, gp, 0, fp, gp, 0);
+	} else {
+		/* Unregister init handlers of current kernel */
+		ia64_sal_set_vectors(SAL_VECTOR_OS_INIT, 0, 0, 0, 0, 0, 0);
 	}
 
 	/* Interrupts aren't acceptable while we reboot */
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 8d2eabe3119..7461d2573d4 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -40,6 +40,7 @@
 
 	.global ia64_do_tlb_purge
 	.global ia64_os_mca_dispatch
+	.global ia64_os_init_on_kdump
 	.global ia64_os_init_dispatch_monarch
 	.global ia64_os_init_dispatch_slave
 
@@ -298,6 +299,25 @@ END(ia64_os_mca_virtual_begin)
 
 //StartMain////////////////////////////////////////////////////////////////////
 
+//
+// NOP init handler for kdump.  In panic situation, we may receive INIT
+// while kernel transition.  Since we initialize registers on leave from
+// current kernel, no longer monarch/slave handlers of current kernel in
+// virtual mode are called safely.
+// We can unregister these init handlers from SAL, however then the INIT
+// will result in warmboot by SAL and we cannot retrieve the crashdump.
+// Therefore register this NOP function to SAL, to prevent entering virtual
+// mode and resulting warmboot by SAL.
+//
+ia64_os_init_on_kdump:
+	mov		r8=r0		// IA64_INIT_RESUME
+	mov             r9=r10		// SAL_GP
+	mov		r22=r17		// *minstate
+	;;
+	mov		r10=r0		// return to same context
+	mov		b0=r12		// SAL_CHECK return address
+	br		b0
+
 //
 // SAL to OS entry point for INIT on all processors.  This has been defined for
 // registration purposes with SAL as a part of ia64_mca_init.  Monarch and
-- 
cgit v1.2.3


From 6cc3efcdf01cf874ffe770919395918a3ee9365b Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <[seto.hidetoshi@jp.fujitsu.com]>
Date: Thu, 6 Aug 2009 14:51:57 -0700
Subject: [IA64] kexec: Unregister MCA handler before kexec

Summary:

  MCA on the beginning of kdump/kexec kernel will result in unexpected
  behavior because MCA handler for previous kernel is invoked on the
  kdump kernel.

Description:

  Once a cpu is passed to new kernel, all resources in previous kernel
  should not be used from the cpu.  Even the resources for MCA handler
  are no exception.  So we cannot handle MCAs and its machine check
  errors during kernel transition, until new handler for new kernel is
  registered with new resources ready for handling the MCA.

How to reproduce:

  Assert MCA while kdump kernel is booting, before new MCA handler for
  kdump kernel is registered.

Expected(Desirable) results:

  No recovery, cancel kdump and reboot the system.

Actual results:

  MCA handler for previous kernel is invoked on the kdump kernel.
  => panic, hang etc. (unexpected)

Proposed fix:

  To avoid entering MCA handler from early stage of new kernel,
  unregister the entry point from SAL before leave from current
  kernel.  Then SAL will make all MCAs to warmboot safely, without
  invoking OS_MCA.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/machine_kexec.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kernel/machine_kexec.c b/arch/ia64/kernel/machine_kexec.c
index 571d66373e0..3d3aeef4694 100644
--- a/arch/ia64/kernel/machine_kexec.c
+++ b/arch/ia64/kernel/machine_kexec.c
@@ -104,6 +104,9 @@ static void ia64_machine_kexec(struct unw_frame_info *info, void *arg)
 		ia64_sal_set_vectors(SAL_VECTOR_OS_INIT, 0, 0, 0, 0, 0, 0);
 	}
 
+	/* Unregister mca handler - No more recovery on current kernel */
+	ia64_sal_set_vectors(SAL_VECTOR_OS_MCA, 0, 0, 0, 0, 0, 0);
+
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
-- 
cgit v1.2.3


From 68cb14c7c46d9204ba451a534f15a8bc12c88e28 Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <[seto.hidetoshi@jp.fujitsu.com]>
Date: Thu, 6 Aug 2009 14:51:57 -0700
Subject: [IA64] kdump: Don't return APs to SAL from kdump

Summary:

  Asserting INIT on cpu going to be offline will result in unexpected
  behavior.  It will be a real problem in kdump cases where INIT might
  be asserted to unstable APs going to be offline by returning to SAL.

Description:

  Since psr.mc is cleared when bits in psr are set to SAL_PSR_BITS_TO_SET
  in ia64_jump_to_sal(), there is a small window (~few msecs) that the
  cpu can receive INIT even if the cpu enter there via INIT handler.
  In this window we do restore of registers for SAL, so INIT asserted
  here will not work properly.

  It is hard to remove this window by masking INIT (i.e. setting psr.mc)
  because we have to unmask it later in OS, because we have to use branch
  instruction (br.ret, not rfi) to return SAL, due to OS_BOOT_RENDEZ to
  SAL return convention.

  I suppose this window will not be a real problem on cpu offline if we
  can educate people not to push INIT button during hotplug operation.
  However, only exception is a race in kdump and INIT.  Now kdump returns
  APs to SAL before processing dump, but the kernel might receive INIT at
  that point in time.  Such INIT might be asserted by kdump itself if an
  AP doesn't react IPI soon and kdump decided to use INIT to stop the AP.
  Or it might be asserted by operator or an external agent to start dump
  on the unstable system.

  Such panic+INIT or INIT+INIT cases should be rare, but it will be happy
  if we can retrieve crashdump even in such cases.

How to reproduce:

  panic+INIT or INIT+INIT, with kdump configured

Expected results:

  crashdump is retrieved anyway

Actual results:

  panic, hang etc. (unexpected)

Proposed fix

  To avoid the window on the way to SAL, this patch stops returning APs
  to SAL in case of kdump.  In other words, this patch makes APs spin
  in OS instead of spinning in SAL.

  (* Note: What impact would be there?  If a cpu is spinning in SAL,
   the cpu is in BOOT_RENDEZ loop, as same as offlined cpu.
   In theory if an INIT is asserted there, cpus in the BOOT_RENDEZ loop
   should not invoke OS_INIT on it.  So in either way, no matter where
   the cpu is spinning actually in, once cpu starts spin and act as
   "frozen," INIT on the cpu have no effects.
   From another point of view, all debug information on the cpu should
   have stored to memory before the cpu start to be frozen.  So no more
   action on the cpu is required.)

  I confirmed that the kdump sometime hangs by concurrent INITs (another
  INIT after an INIT), and it doesn't hang after applying this patch.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/crash.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 3f3a5797d19..b2a8b3da8af 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -140,10 +140,6 @@ kdump_cpu_freeze(struct unw_frame_info *info, void *arg)
 	atomic_inc(&kdump_cpu_frozen);
 	kdump_status[cpuid] = 1;
 	mb();
-#ifdef CONFIG_HOTPLUG_CPU
-	if (cpuid != 0)
-		ia64_jump_to_sal(&sal_boot_rendez_state[cpuid]);
-#endif
 	for (;;)
 		cpu_relax();
 }
-- 
cgit v1.2.3


From 1726b0883dd08636705ea55d577eb0ec314ba427 Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <[seto.hidetoshi@jp.fujitsu.com]>
Date: Thu, 6 Aug 2009 14:51:57 -0700
Subject: [IA64] kdump: Mask INIT first in panic-kdump path

Summary:

  Asserting INIT might block kdump if the system is already going to
  start kdump via panic.

Description:

  INIT can interrupt anywhere in panic path, so it can interrupt in
  middle of kdump kicked by panic.  Therefore there is a race if kdump
  is kicked concurrently, via Panic and via INIT.

  INIT could fail to invoke kdump if the system is already going to
  start kdump via panic.  It could not restart kdump from INIT handler
  if some of cpus are already playing dead with INIT masked.  It also
  means that INIT could block kdump's progress if no monarch is entered
  in the INIT rendezvous.

  Panic+INIT is a rare, but possible situation since it can be assumed
  that the kernel or an internal agent decides to panic the unstable
  system while another external agent decides to send an INIT to the
  system at same time.

How to reproduce:

  Assert INIT just after panic, before all other cpus have frozen

Expected results:

  continue kdump invoked by panic, or restart kdump from INIT

Actual results:

  might be hang, crashdump not retrieved

Proposed Fix:

  This patch masks INIT first in panic path to take the initiative on
  kdump, and reuse atomic value kdump_in_progress to make sure there is
  only one initiator of kdump.  All INITs asserted later should be used
  only for freezing all other cpus.

  This mask will be removed soon by rfi in relocate_kernel.S, before jump
  into kdump kernel, after all cpus are frozen and no-op INIT handler is
  registered.  So if INIT was in the interval while it is masked, it will
  pend on the system and will received just after the rfi, and handled by
  the no-op handler.

  If there was a MCA event while psr.mc is 1, in theory the event will
  pend on the system and will received just after the rfi same as above.
  MCA handler is unregistered here at the time, so received MCA will not
  reach to OS_MCA and will result in warmboot by SAL.

  Note that codes in this masked interval are relatively simpler than
  that in MCA/INIT handler which also executed with the mask.  So it can
  be said that probability of error in this interval is supposed not so
  higher than that in MCA/INIT handler.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/crash.c           | 47 +++++++++++++++++++++++++++++++++-----
 arch/ia64/kernel/relocate_kernel.S |  2 +-
 2 files changed, 42 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index b2a8b3da8af..9c851b73f27 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -23,6 +23,7 @@
 int kdump_status[NR_CPUS];
 static atomic_t kdump_cpu_frozen;
 atomic_t kdump_in_progress;
+static int kdump_freeze_monarch;
 static int kdump_on_init = 1;
 static int kdump_on_fatal_mca = 1;
 
@@ -108,6 +109,33 @@ machine_crash_shutdown(struct pt_regs *pt)
 	 */
 	kexec_disable_iosapic();
 #ifdef CONFIG_SMP
+	/*
+	 * If kdump_on_init is set and an INIT is asserted here, kdump will
+	 * be started again via INIT monarch.
+	 */
+	local_irq_disable();
+	ia64_set_psr_mc();	/* mask MCA/INIT */
+	if (atomic_inc_return(&kdump_in_progress) != 1)
+		unw_init_running(kdump_cpu_freeze, NULL);
+
+	/*
+	 * Now this cpu is ready for kdump.
+	 * Stop all others by IPI or INIT.  They could receive INIT from
+	 * outside and might be INIT monarch, but only thing they have to
+	 * do is falling into kdump_cpu_freeze().
+	 *
+	 * If an INIT is asserted here:
+	 * - All receivers might be slaves, since some of cpus could already
+	 *   be frozen and INIT might be masked on monarch.  In this case,
+	 *   all slaves will park in while (monarch_cpu == -1) loop before
+	 *   DIE_INIT_SLAVE_ENTER that for waiting monarch enters.
+	 *	=> TBD: freeze all slaves
+	 * - One might be a monarch, but INIT rendezvous will fail since
+	 *   at least this cpu already have INIT masked so it never join
+	 *   to the rendezvous.  In this case, all slaves and monarch will
+	 *   be frozen after timeout of the INIT rendezvous.
+	 *	=> TBD: freeze them without waiting timeout
+	 */
 	kdump_smp_send_stop();
 	/* not all cpu response to IPI, send INIT to freeze them */
 	if (kdump_wait_cpu_freeze() && kdump_on_init) 	{
@@ -177,13 +205,18 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	switch (val) {
 	case DIE_INIT_MONARCH_PROCESS:
 		if (kdump_on_init) {
-			atomic_set(&kdump_in_progress, 1);
+			if (atomic_inc_return(&kdump_in_progress) != 1)
+				kdump_freeze_monarch = 1;
 			*(nd->monarch_cpu) = -1;
 		}
 		break;
 	case DIE_INIT_MONARCH_LEAVE:
-		if (kdump_on_init)
-			machine_kdump_on_init();
+		if (kdump_on_init) {
+			if (kdump_freeze_monarch)
+				unw_init_running(kdump_cpu_freeze, NULL);
+			else
+				machine_kdump_on_init();
+		}
 		break;
 	case DIE_INIT_SLAVE_LEAVE:
 		if (atomic_read(&kdump_in_progress))
@@ -196,9 +229,11 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	case DIE_MCA_MONARCH_LEAVE:
 		/* *(nd->data) indicate if MCA is recoverable */
 		if (kdump_on_fatal_mca && !(*(nd->data))) {
-			atomic_set(&kdump_in_progress, 1);
-			*(nd->monarch_cpu) = -1;
-			machine_kdump_on_init();
+			if (atomic_inc_return(&kdump_in_progress) == 1) {
+				*(nd->monarch_cpu) = -1;
+				machine_kdump_on_init();
+			}
+			/* We got fatal MCA while kdump!? No way!! */
 		}
 		break;
 	}
diff --git a/arch/ia64/kernel/relocate_kernel.S b/arch/ia64/kernel/relocate_kernel.S
index 903babd22d6..32f6fc131fb 100644
--- a/arch/ia64/kernel/relocate_kernel.S
+++ b/arch/ia64/kernel/relocate_kernel.S
@@ -52,7 +52,7 @@ GLOBAL_ENTRY(relocate_new_kernel)
 	srlz.i
 	;;
 	mov ar.rnat=r18
-	rfi
+	rfi				// note: this unmask MCA/INIT (psr.mc)
 	;;
 1:
 	//physical mode code begin
-- 
cgit v1.2.3


From 5959906ee9dee602a46e49c868a7e543e050d605 Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <[seto.hidetoshi@jp.fujitsu.com]>
Date: Thu, 6 Aug 2009 14:51:57 -0700
Subject: [IA64] kdump: Try INIT regardless of

kdump_on_init

CPUs should be frozen if possible, otherwise it might hinder kdump.
So if there are CPUs not respond to IPI, try INIT to stop them.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/crash.c | 43 +++++++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 9c851b73f27..0995fdc7b29 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -138,8 +138,10 @@ machine_crash_shutdown(struct pt_regs *pt)
 	 */
 	kdump_smp_send_stop();
 	/* not all cpu response to IPI, send INIT to freeze them */
-	if (kdump_wait_cpu_freeze() && kdump_on_init) 	{
+	if (kdump_wait_cpu_freeze()) {
 		kdump_smp_send_init();
+		/* wait again, don't go ahead if possible */
+		kdump_wait_cpu_freeze();
 	}
 #endif
 }
@@ -178,6 +180,19 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	struct ia64_mca_notify_die *nd;
 	struct die_args *args = data;
 
+	if (atomic_read(&kdump_in_progress)) {
+		switch (val) {
+		case DIE_INIT_MONARCH_LEAVE:
+			if (!kdump_freeze_monarch)
+				break;
+			/* fall through */
+		case DIE_INIT_SLAVE_LEAVE:
+		case DIE_MCA_RENDZVOUS_LEAVE:
+			unw_init_running(kdump_cpu_freeze, NULL);
+			break;
+		}
+	}
+
 	if (!kdump_on_init && !kdump_on_fatal_mca)
 		return NOTIFY_DONE;
 
@@ -190,41 +205,25 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	}
 
 	if (val != DIE_INIT_MONARCH_LEAVE &&
-	    val != DIE_INIT_SLAVE_LEAVE &&
 	    val != DIE_INIT_MONARCH_PROCESS &&
-	    val != DIE_MCA_RENDZVOUS_LEAVE &&
 	    val != DIE_MCA_MONARCH_LEAVE)
 		return NOTIFY_DONE;
 
 	nd = (struct ia64_mca_notify_die *)args->err;
-	/* Reason code 1 means machine check rendezvous*/
-	if ((val == DIE_INIT_MONARCH_LEAVE || val == DIE_INIT_SLAVE_LEAVE
-	    || val == DIE_INIT_MONARCH_PROCESS) && nd->sos->rv_rc == 1)
-		return NOTIFY_DONE;
 
 	switch (val) {
 	case DIE_INIT_MONARCH_PROCESS:
-		if (kdump_on_init) {
+		/* Reason code 1 means machine check rendezvous*/
+		if (kdump_on_init && (nd->sos->rv_rc != 1)) {
 			if (atomic_inc_return(&kdump_in_progress) != 1)
 				kdump_freeze_monarch = 1;
 			*(nd->monarch_cpu) = -1;
 		}
 		break;
 	case DIE_INIT_MONARCH_LEAVE:
-		if (kdump_on_init) {
-			if (kdump_freeze_monarch)
-				unw_init_running(kdump_cpu_freeze, NULL);
-			else
-				machine_kdump_on_init();
-		}
-		break;
-	case DIE_INIT_SLAVE_LEAVE:
-		if (atomic_read(&kdump_in_progress))
-			unw_init_running(kdump_cpu_freeze, NULL);
-		break;
-	case DIE_MCA_RENDZVOUS_LEAVE:
-		if (atomic_read(&kdump_in_progress))
-			unw_init_running(kdump_cpu_freeze, NULL);
+		/* Reason code 1 means machine check rendezvous*/
+		if (kdump_on_init && (nd->sos->rv_rc != 1))
+			machine_kdump_on_init();
 		break;
 	case DIE_MCA_MONARCH_LEAVE:
 		/* *(nd->data) indicate if MCA is recoverable */
-- 
cgit v1.2.3


From 0cced40e7c58b1105aef3ca446da7b158a18a9a6 Mon Sep 17 00:00:00 2001
From: Hidetoshi Seto <[seto.hidetoshi@jp.fujitsu.com]>
Date: Thu, 6 Aug 2009 14:51:58 -0700
Subject: [IA64] kdump: Short path to freeze CPUs

Setting monarch_cpu = -1 to let slaves frozen might not work, because
there might be slaves being late, not entered the rendezvous yet.
Such slaves might be caught in while (monarch_cpu == -1) loop.

Use kdump_in_progress instead of monarch_cpus to break INIT rendezvous
and let all slaves enter DIE_INIT_SLAVE_LEAVE smoothly.

And monarch no longer need to manage rendezvous if once kdump_in_progress
is set, catch the monarch in DIE_INIT_MONARCH_ENTER then.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: kexec@lists.infradead.org
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/crash.c | 15 ++++++---------
 arch/ia64/kernel/mca.c   | 15 +++++++++++++--
 2 files changed, 19 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 0995fdc7b29..6631a9dfafd 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -127,14 +127,13 @@ machine_crash_shutdown(struct pt_regs *pt)
 	 * If an INIT is asserted here:
 	 * - All receivers might be slaves, since some of cpus could already
 	 *   be frozen and INIT might be masked on monarch.  In this case,
-	 *   all slaves will park in while (monarch_cpu == -1) loop before
-	 *   DIE_INIT_SLAVE_ENTER that for waiting monarch enters.
-	 *	=> TBD: freeze all slaves
+	 *   all slaves will be frozen soon since kdump_in_progress will let
+	 *   them into DIE_INIT_SLAVE_LEAVE.
 	 * - One might be a monarch, but INIT rendezvous will fail since
 	 *   at least this cpu already have INIT masked so it never join
 	 *   to the rendezvous.  In this case, all slaves and monarch will
-	 *   be frozen after timeout of the INIT rendezvous.
-	 *	=> TBD: freeze them without waiting timeout
+	 *   be frozen soon with no wait since the INIT rendezvous is skipped
+	 *   by kdump_in_progress.
 	 */
 	kdump_smp_send_stop();
 	/* not all cpu response to IPI, send INIT to freeze them */
@@ -187,6 +186,7 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 				break;
 			/* fall through */
 		case DIE_INIT_SLAVE_LEAVE:
+		case DIE_INIT_MONARCH_ENTER:
 		case DIE_MCA_RENDZVOUS_LEAVE:
 			unw_init_running(kdump_cpu_freeze, NULL);
 			break;
@@ -217,7 +217,6 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 		if (kdump_on_init && (nd->sos->rv_rc != 1)) {
 			if (atomic_inc_return(&kdump_in_progress) != 1)
 				kdump_freeze_monarch = 1;
-			*(nd->monarch_cpu) = -1;
 		}
 		break;
 	case DIE_INIT_MONARCH_LEAVE:
@@ -228,10 +227,8 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	case DIE_MCA_MONARCH_LEAVE:
 		/* *(nd->data) indicate if MCA is recoverable */
 		if (kdump_on_fatal_mca && !(*(nd->data))) {
-			if (atomic_inc_return(&kdump_in_progress) == 1) {
-				*(nd->monarch_cpu) = -1;
+			if (atomic_inc_return(&kdump_in_progress) == 1)
 				machine_kdump_on_init();
-			}
 			/* We got fatal MCA while kdump!? No way!! */
 		}
 		break;
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 7b30d21c519..d2877a7bfe2 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1682,14 +1682,25 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 
 	if (!sos->monarch) {
 		ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT;
+
+#ifdef CONFIG_KEXEC
+		while (monarch_cpu == -1 && !atomic_read(&kdump_in_progress))
+			udelay(1000);
+#else
 		while (monarch_cpu == -1)
-		       cpu_relax();	/* spin until monarch enters */
+			cpu_relax();	/* spin until monarch enters */
+#endif
 
 		NOTIFY_INIT(DIE_INIT_SLAVE_ENTER, regs, (long)&nd, 1);
 		NOTIFY_INIT(DIE_INIT_SLAVE_PROCESS, regs, (long)&nd, 1);
 
+#ifdef CONFIG_KEXEC
+		while (monarch_cpu != -1 && !atomic_read(&kdump_in_progress))
+			udelay(1000);
+#else
 		while (monarch_cpu != -1)
-		       cpu_relax();	/* spin until monarch leaves */
+			cpu_relax();	/* spin until monarch leaves */
+#endif
 
 		NOTIFY_INIT(DIE_INIT_SLAVE_LEAVE, regs, (long)&nd, 1);
 
-- 
cgit v1.2.3


From 033eb0acddb71bbee32dce285256b3489b17ef7f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 15 Sep 2009 09:26:04 +0900
Subject: sh: cpufreq: Include CPU id in info messages.

This tidies up the printks when running on SMP, and aids in debugging
when certain cores are unable to be scaled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpufreq.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c
index e0590ffebd7..dce4f3ff093 100644
--- a/arch/sh/kernel/cpufreq.c
+++ b/arch/sh/kernel/cpufreq.c
@@ -82,7 +82,8 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	cpuclk = clk_get(NULL, "cpu_clk");
 	if (IS_ERR(cpuclk)) {
-		printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
+		printk(KERN_ERR "cpufreq: couldn't get CPU#%d clk\n",
+		       policy->cpu);
 		return PTR_ERR(cpuclk);
 	}
 
@@ -95,22 +96,21 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->min		= policy->cpuinfo.min_freq;
 	policy->max		= policy->cpuinfo.max_freq;
 
-
 	/*
 	 * Catch the cases where the clock framework hasn't been wired up
 	 * properly to support scaling.
 	 */
 	if (unlikely(policy->min == policy->max)) {
 		printk(KERN_ERR "cpufreq: clock framework rate rounding "
-		       "not supported on this CPU.\n");
+		       "not supported on CPU#%d.\n", policy->cpu);
 
 		clk_put(cpuclk);
 		return -EINVAL;
 	}
 
-	printk(KERN_INFO "cpufreq: Frequencies - Minimum %u.%03u MHz, "
+	printk(KERN_INFO "cpufreq: CPU#%d Frequencies - Minimum %u.%03u MHz, "
 	       "Maximum %u.%03u MHz.\n",
-	       policy->min / 1000, policy->min % 1000,
+	       policy->cpu, policy->min / 1000, policy->min % 1000,
 	       policy->max / 1000, policy->max % 1000);
 
 	return 0;
-- 
cgit v1.2.3


From 1f85d381062a046fd8f3ddb654a5276266daf72c Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Tue, 15 Sep 2009 00:21:34 +0000
Subject: sh: add kycr2_delay for sh_keysc

After KYCR2 is set, udelay might become necessary if there are only a
small number of keys attached. This patch introduces an optional delay
through the platform data to address this problem.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/sh_keysc.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
index b5a4dd5a972..4a65b1e40ea 100644
--- a/arch/sh/include/asm/sh_keysc.h
+++ b/arch/sh/include/asm/sh_keysc.h
@@ -7,6 +7,7 @@ struct sh_keysc_info {
 	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
 	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
 	int delay;
+	int kycr2_delay;
 	int keycodes[SH_KEYSC_MAXKEYS];
 };
 
-- 
cgit v1.2.3


From e9103e74907d748f3cfe1b75b9d895f61c4ebc17 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 14 Sep 2009 11:23:00 +0000
Subject: sh: Add KEYSC support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 52 ++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 4d6d5884c67..b89e47920b5 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -18,10 +18,12 @@
 #include <linux/delay.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/i2c.h>
+#include <linux/input.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
+#include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 
 /*
@@ -332,6 +334,46 @@ static struct i2c_board_info i2c1_devices[] = {
 	},
 };
 
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 50,
+	.kycr2_delay	= 100,
+	.keycodes	= { KEY_1, 0, 0, 0, 0,
+			    KEY_2, 0, 0, 0, 0,
+			    KEY_3, 0, 0, 0, 0,
+			    KEY_4, 0, 0, 0, 0,
+			    KEY_5, 0, 0, 0, 0,
+			    KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+	.archdata = {
+		.hwblk_id = HWBLK_KEYSC,
+	},
+};
+
 static struct platform_device *ecovec_devices[] __initdata = {
 	&heartbeat_device,
 	&nor_flash_device,
@@ -341,6 +383,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&lcdc_device,
 	&ceu0_device,
 	&ceu1_device,
+	&keysc_device,
 };
 
 #define EEPROM_ADDR 0x50
@@ -584,6 +627,15 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_VIO1_CLK, NULL);
 	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
 
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+
 	/* enable I2C device */
 	i2c_register_board_info(1, i2c1_devices,
 				ARRAY_SIZE(i2c1_devices));
-- 
cgit v1.2.3


From 147df2d68f209fef6a53b345a5a9a9ea38a60f66 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 14 Sep 2009 11:22:31 +0000
Subject: sh: mach-ecovec24: deassert usb irq on boot.

This patch prevents the USB1 interrupt from remaining asserted
immediately after re-boot or during a jump in to a secondary kernel.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index b89e47920b5..40decfe0f37 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -492,6 +492,7 @@ static int __init arch_setup(void)
 
 	/* enable USB */
 	ctrl_outw(0x0000, 0xA4D80000);
+	ctrl_outw(0x0000, 0xA4D90000);
 	gpio_request(GPIO_PTB3,  NULL);
 	gpio_request(GPIO_PTB4,  NULL);
 	gpio_request(GPIO_PTB5,  NULL);
-- 
cgit v1.2.3


From a991801a7029ebba4a3eb72536f73c26d1482be0 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Mon, 14 Sep 2009 11:23:16 +0000
Subject: sh: mach-ecovec24: need asm/clock.h.

Fixes up build failures.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 40decfe0f37..7da274ae744 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -24,6 +24,7 @@
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
 #include <asm/sh_keysc.h>
+#include <asm/clock.h>
 #include <cpu/sh7724.h>
 
 /*
-- 
cgit v1.2.3


From bb7001b50123fcb05f331b22092243f92e9bcec9 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 11 Sep 2009 09:05:00 +0000
Subject: sh: kfr2r09: document the PLL/FLL <-> RF relationship.

Early clock initialization sets up PLL/FLL values for optimal RF
behaviour. As this relationship is presently undocumented, we document
this in the script so the rationale is apparent.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
index a19ac31c8cd..3a65503714e 100644
--- a/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
+++ b/arch/sh/include/mach-kfr2r09/mach/partner-jet-setup.txt
@@ -27,6 +27,8 @@ ED 0xff800020, 0xa5a50001
 ED 0xfec10000, 0x0000001b
 
 LIST "setup clocks"
+LIST "The PLL and FLL values are updated here for the optimal"
+LIST "RF frequency and improved reception sensitivity."
 ED 0xa4150004, 0x00000050
 ED 0xa4150000, 0x91053508
 WAIT 1
-- 
cgit v1.2.3


From 353f6dd2dec992ddd34620a94b051b0f76227379 Mon Sep 17 00:00:00 2001
From: Anirban Sinha <asinha@zeugmasystems.com>
Date: Mon, 14 Sep 2009 11:13:37 -0700
Subject: cleanup console_print()

console_print() is an old legacy interface mostly unused in the entire
kernel tree. It's best to clean up its existing use and let developers
use their own implementation of it as they feel fit.

Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/kernel/head.S    | 1 +
 arch/ia64/kernel/head.h    | 1 +
 arch/ia64/kernel/process.c | 7 +++++++
 3 files changed, 9 insertions(+)
 create mode 100644 arch/ia64/kernel/head.h

(limited to 'arch')

diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 23f846de62d..e6c5c3d5e1f 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -34,6 +34,7 @@
 #include <asm/mca_asm.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include "head.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET				\
diff --git a/arch/ia64/kernel/head.h b/arch/ia64/kernel/head.h
new file mode 100644
index 00000000000..2e2ac6824e6
--- /dev/null
+++ b/arch/ia64/kernel/head.h
@@ -0,0 +1 @@
+extern void console_print(const char *s);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 89969e95004..9bcec9945c1 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -161,6 +161,13 @@ show_regs (struct pt_regs *regs)
 		show_stack(NULL, NULL);
 }
 
+/* local support for deprecated console_print */
+void
+console_print(const char *s)
+{
+	printk(KERN_EMERG "%s", s);
+}
+
 void
 do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 {
-- 
cgit v1.2.3


From c8c2df9055074197ba12902c6d7e840667fb56d6 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 15 Sep 2009 09:47:35 +0900
Subject: sh: Fix up sh7705 flush_dcache_page() build.

Type mismatch caused the page deref to blow up, fix it up as per the sh4
change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/cache-sh7705.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 6293f57fa88..2cadee2037a 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -133,8 +133,9 @@ static void __flush_dcache_page(unsigned long phys)
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
  */
-static void sh7705_flush_dcache_page(void *page)
+static void sh7705_flush_dcache_page(void *arg)
 {
+	struct page *page = arg;
 	struct address_space *mapping = page_mapping(page);
 
 	if (mapping && !mapping_mapped(mapping))
-- 
cgit v1.2.3


From a6f15ade97989d414e9bf33874c9d5d1f39808ec Mon Sep 17 00:00:00 2001
From: Phil Edworthy <phil.edworthy@renesas.com>
Date: Tue, 15 Sep 2009 12:00:30 +0000
Subject: video: sh_mobile_lcdcfb: use both register sets for display panning

Switch to using both register sets - side A and side B for display panning.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c      | 2 +-
 arch/sh/boards/mach-ecovec24/setup.c | 2 +-
 arch/sh/boards/mach-kfr2r09/setup.c  | 2 +-
 arch/sh/boards/mach-migor/setup.c    | 2 +-
 arch/sh/boards/mach-se/7724/setup.c  | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index bcf1f40bcc6..327d47c25a5 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -211,7 +211,7 @@ static struct resource lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 7da274ae744..bbe601d4209 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -239,7 +239,7 @@ static struct resource lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000,
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 7155be0d115..c08d33fe210 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -162,7 +162,7 @@ static struct resource kfr2r09_sh_lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index be8f0d94f6f..6ed1fd32369 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -279,7 +279,7 @@ static struct resource migor_lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 1876c8306c8..00973e0f8c6 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -166,7 +166,7 @@ static struct resource lcdc_resources[] = {
 	[0] = {
 		.name	= "LCDC",
 		.start	= 0xfe940000,
-		.end	= 0xfe941fff,
+		.end	= 0xfe942fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-- 
cgit v1.2.3


From c88d5910890ad35af283344417891344604f0438 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 10 Sep 2009 13:50:02 +0200
Subject: sched: Merge select_task_rq_fair() and sched_balance_self()

The problem with wake_idle() is that is doesn't respect things like
cpu_power, which means it doesn't deal well with SMT nor the recent
RT interaction.

To cure this, it needs to do what sched_balance_self() does, which
leads to the possibility of merging select_task_rq_fair() and
sched_balance_self().

Modify sched_balance_self() to:

  - update_shares() when walking up the domain tree,
    (it only called it for the top domain, but it should
     have done this anyway), which allows us to remove
    this ugly bit from try_to_wake_up().

  - do wake_affine() on the smallest domain that contains
    both this (the waking) and the prev (the wakee) cpu for
    WAKE invocations.

Then use the top-down balance steps it had to replace wake_idle().

This leads to the dissapearance of SD_WAKE_BALANCE and
SD_WAKE_IDLE_FAR, with SD_WAKE_IDLE replaced with SD_BALANCE_WAKE.

SD_WAKE_AFFINE needs SD_BALANCE_WAKE to be effective.

Touch all topology bits to replace the old with new SD flags --
platforms might need re-tuning, enabling SD_BALANCE_WAKE
conditionally on a NUMA distance seems like a good additional
feature, magny-core and small nehalem systems would want this
enabled, systems with slow interconnects would not.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/topology.h           | 5 +++--
 arch/mips/include/asm/mach-ip27/topology.h | 2 +-
 arch/powerpc/include/asm/topology.h        | 5 ++---
 arch/sh/include/asm/topology.h             | 4 ++--
 arch/sparc/include/asm/topology_64.h       | 4 ++--
 arch/x86/include/asm/topology.h            | 4 +---
 6 files changed, 11 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index 7b4c8c70b2d..cf6053b226c 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -67,6 +67,7 @@ void build_cpu_to_node_map(void);
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_WAKE	\
 				| SD_WAKE_AFFINE,	\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
@@ -91,8 +92,8 @@ void build_cpu_to_node_map(void);
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_BALANCE_WAKE	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 64,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index 07547231e07..d8332398f5b 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -48,7 +48,7 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
 	.cache_nice_tries	= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
-				| SD_WAKE_BALANCE,	\
+				| SD_BALANCE_WAKE,	\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 054a16d6808..c6343313ff5 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -62,9 +62,8 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_NEWIDLE	\
-				| SD_WAKE_IDLE		\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_BALANCE_WAKE	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index b69ee850906..dc1531e2f25 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -21,8 +21,8 @@
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_BALANCE_WAKE	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index e5ea8d33242..1d091abd2d1 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -57,8 +57,8 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
-				| SD_SERIALIZE		\
-				| SD_WAKE_BALANCE,	\
+				| SD_BALANCE_WAKE	\
+				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 }
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 26d06e052a1..966d58dc627 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -145,14 +145,12 @@ extern unsigned long node_remap_size[];
 				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
-				| 0*SD_WAKE_IDLE			\
+				| 1*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
-				| 1*SD_WAKE_BALANCE			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 1*SD_SERIALIZE			\
-				| 1*SD_WAKE_IDLE_FAR			\
 				| 0*SD_PREFER_SIBLING			\
 				,					\
 	.last_balance		= jiffies,				\
-- 
cgit v1.2.3


From 78e7ed53c9f42f04f9401ada6f7047db60781676 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 3 Sep 2009 13:16:51 +0200
Subject: sched: Tweak wake_idx

When merging select_task_rq_fair() and sched_balance_self() we lost
the use of wake_idx, restore that and set them to 0 to make wake
balancing more aggressive.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/topology.h     | 5 +++--
 arch/powerpc/include/asm/topology.h  | 3 ++-
 arch/sh/include/asm/topology.h       | 2 +-
 arch/sparc/include/asm/topology_64.h | 2 +-
 arch/x86/include/asm/topology.h      | 2 +-
 5 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index cf6053b226c..47f3c51d5e2 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -62,11 +62,12 @@ void build_cpu_to_node_map(void);
 	.busy_idx		= 2,			\
 	.idle_idx		= 1,			\
 	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
+	.wake_idx		= 0,			\
 	.forkexec_idx		= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
 				| SD_BALANCE_WAKE	\
 				| SD_WAKE_AFFINE,	\
 	.last_balance		= jiffies,		\
@@ -87,7 +88,7 @@ void build_cpu_to_node_map(void);
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
 	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
+	.wake_idx		= 0,			\
 	.forkexec_idx		= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index c6343313ff5..a6b220ab56d 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -58,9 +58,10 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 	.busy_idx		= 3,			\
 	.idle_idx		= 1,			\
 	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
+	.wake_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_WAKE	\
 				| SD_SERIALIZE,		\
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index dc1531e2f25..9054e5c0ad5 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -16,7 +16,7 @@
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
 	.newidle_idx		= 2,			\
-	.wake_idx		= 1,			\
+	.wake_idx		= 0,			\
 	.forkexec_idx		= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 1d091abd2d1..bc3a0930ed6 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -52,7 +52,7 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
 	.newidle_idx		= 0, 			\
-	.wake_idx		= 1,			\
+	.wake_idx		= 0,			\
 	.forkexec_idx		= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 966d58dc627..4b1b335097b 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -138,7 +138,7 @@ extern unsigned long node_remap_size[];
 	.busy_idx		= 3,					\
 	.idle_idx		= SD_IDLE_IDX,				\
 	.newidle_idx		= SD_NEWIDLE_IDX,			\
-	.wake_idx		= 1,					\
+	.wake_idx		= 0,					\
 	.forkexec_idx		= SD_FORKEXEC_IDX,			\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
-- 
cgit v1.2.3


From 0ec9fab3d186d9cbb00c0f694d4a260d07c198d9 Mon Sep 17 00:00:00 2001
From: Mike Galbraith <efault@gmx.de>
Date: Tue, 15 Sep 2009 15:07:03 +0200
Subject: sched: Improve latencies and throughput

Make the idle balancer more agressive, to improve a
x264 encoding workload provided by Jason Garrett-Glaser:

 NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 252.82 fps, 22096.60 kb/s
 encoded 600 frames, 250.69 fps, 22096.60 kb/s
 encoded 600 frames, 245.76 fps, 22096.60 kb/s

 NO_NEXT_BUDDY LB_BIAS
 encoded 600 frames, 344.44 fps, 22096.60 kb/s
 encoded 600 frames, 346.66 fps, 22096.60 kb/s
 encoded 600 frames, 352.59 fps, 22096.60 kb/s

 NO_NEXT_BUDDY NO_LB_BIAS
 encoded 600 frames, 425.75 fps, 22096.60 kb/s
 encoded 600 frames, 425.45 fps, 22096.60 kb/s
 encoded 600 frames, 422.49 fps, 22096.60 kb/s

Peter pointed out that this is better done via newidle_idx,
not via LB_BIAS, newidle balancing should look for where
there is load _now_, not where there was load 2 ticks ago.

Worst-case latencies are improved as well as no buddies
means less vruntime spread. (as per prior lkml discussions)

This change improves kbuild-peak parallelism as well.

Reported-by: Jason Garrett-Glaser <darkshikari@gmail.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1253011667.9128.16.camel@marge.simson.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/topology.h    | 5 +++--
 arch/powerpc/include/asm/topology.h | 2 +-
 arch/sh/include/asm/topology.h      | 3 ++-
 arch/x86/include/asm/topology.h     | 4 +---
 4 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index 47f3c51d5e2..42f1673ec83 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -61,7 +61,7 @@ void build_cpu_to_node_map(void);
 	.cache_nice_tries	= 2,			\
 	.busy_idx		= 2,			\
 	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
+	.newidle_idx		= 0,			\
 	.wake_idx		= 0,			\
 	.forkexec_idx		= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
@@ -87,10 +87,11 @@ void build_cpu_to_node_map(void);
 	.cache_nice_tries	= 2,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
-	.newidle_idx		= 2,			\
+	.newidle_idx		= 0,			\
 	.wake_idx		= 0,			\
 	.forkexec_idx		= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_WAKE	\
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index a6b220ab56d..1a2c9eb42a0 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -57,7 +57,7 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 	.cache_nice_tries	= 1,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 1,			\
-	.newidle_idx		= 2,			\
+	.newidle_idx		= 0,			\
 	.wake_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index 9054e5c0ad5..c8436771e31 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -15,13 +15,14 @@
 	.cache_nice_tries	= 2,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 2,			\
-	.newidle_idx		= 2,			\
+	.newidle_idx		= 0,			\
 	.wake_idx		= 0,			\
 	.forkexec_idx		= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_WAKE	\
+				| SD_BALANCE_NEWIDLE	\
 				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 4b1b335097b..7fafd1bc414 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -116,14 +116,12 @@ extern unsigned long node_remap_size[];
 
 # define SD_CACHE_NICE_TRIES	1
 # define SD_IDLE_IDX		1
-# define SD_NEWIDLE_IDX		2
 # define SD_FORKEXEC_IDX	0
 
 #else
 
 # define SD_CACHE_NICE_TRIES	2
 # define SD_IDLE_IDX		2
-# define SD_NEWIDLE_IDX		2
 # define SD_FORKEXEC_IDX	1
 
 #endif
@@ -137,7 +135,7 @@ extern unsigned long node_remap_size[];
 	.cache_nice_tries	= SD_CACHE_NICE_TRIES,			\
 	.busy_idx		= 3,					\
 	.idle_idx		= SD_IDLE_IDX,				\
-	.newidle_idx		= SD_NEWIDLE_IDX,			\
+	.newidle_idx		= 0,					\
 	.wake_idx		= 0,					\
 	.forkexec_idx		= SD_FORKEXEC_IDX,			\
 									\
-- 
cgit v1.2.3


From b8a543ea5a5896830a9969bacfd047f9d15940b2 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Tue, 15 Sep 2009 15:22:03 +0200
Subject: sched: Reduce forkexec_idx

If we're looking to place a new task, we might as well find the
idlest position _now_, not 1 tick ago.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/topology.h     | 4 ++--
 arch/sh/include/asm/topology.h       | 2 +-
 arch/sparc/include/asm/topology_64.h | 2 +-
 arch/x86/include/asm/topology.h      | 4 +---
 4 files changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index 42f1673ec83..569b9dafc78 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -63,7 +63,7 @@ void build_cpu_to_node_map(void);
 	.idle_idx		= 1,			\
 	.newidle_idx		= 0,			\
 	.wake_idx		= 0,			\
-	.forkexec_idx		= 1,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
@@ -89,7 +89,7 @@ void build_cpu_to_node_map(void);
 	.idle_idx		= 2,			\
 	.newidle_idx		= 0,			\
 	.wake_idx		= 0,			\
-	.forkexec_idx		= 1,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index c8436771e31..a8cc564b703 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -17,7 +17,7 @@
 	.idle_idx		= 2,			\
 	.newidle_idx		= 0,			\
 	.wake_idx		= 0,			\
-	.forkexec_idx		= 1,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index bc3a0930ed6..10b979d1de2 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -53,7 +53,7 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 	.idle_idx		= 2,			\
 	.newidle_idx		= 0, 			\
 	.wake_idx		= 0,			\
-	.forkexec_idx		= 1,			\
+	.forkexec_idx		= 0,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 7fafd1bc414..589f12383d7 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -116,13 +116,11 @@ extern unsigned long node_remap_size[];
 
 # define SD_CACHE_NICE_TRIES	1
 # define SD_IDLE_IDX		1
-# define SD_FORKEXEC_IDX	0
 
 #else
 
 # define SD_CACHE_NICE_TRIES	2
 # define SD_IDLE_IDX		2
-# define SD_FORKEXEC_IDX	1
 
 #endif
 
@@ -137,7 +135,7 @@ extern unsigned long node_remap_size[];
 	.idle_idx		= SD_IDLE_IDX,				\
 	.newidle_idx		= 0,					\
 	.wake_idx		= 0,					\
-	.forkexec_idx		= SD_FORKEXEC_IDX,			\
+	.forkexec_idx		= 0,					\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
 				| 1*SD_BALANCE_NEWIDLE			\
-- 
cgit v1.2.3


From a8303aaf2b2f74714db6d204ab4fcb810942664e Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 2 Sep 2009 10:56:56 +0200
Subject: x86: Move APERF/MPERF into a X86_FEATURE

Move the APERFMPERF capacility into a X86_FEATURE flag so that it
can be used outside of the acpi cpufreq driver.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: cpufreq@vger.kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cpufeature.h          | 1 +
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 9 ++-------
 arch/x86/kernel/cpu/intel.c                | 6 ++++++
 3 files changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 847fee6493a..9cfc88b9774 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -96,6 +96,7 @@
 #define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
 #define X86_FEATURE_EXTD_APICID	(3*32+26) /* has extended APICID (8 bits) */
 #define X86_FEATURE_AMD_DCM     (3*32+27) /* multi-node processor */
+#define X86_FEATURE_APERFMPERF	(3*32+28) /* APERFMPERF */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index ae9b503220c..509e6a7db71 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -60,7 +60,6 @@ enum {
 };
 
 #define INTEL_MSR_RANGE		(0xffff)
-#define CPUID_6_ECX_APERFMPERF_CAPABILITY	(0x1)
 
 struct acpi_cpufreq_data {
 	struct acpi_processor_performance *acpi_data;
@@ -731,12 +730,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	acpi_processor_notify_smm(THIS_MODULE);
 
 	/* Check for APERF/MPERF support in hardware */
-	if (c->x86_vendor == X86_VENDOR_INTEL && c->cpuid_level >= 6) {
-		unsigned int ecx;
-		ecx = cpuid_ecx(6);
-		if (ecx & CPUID_6_ECX_APERFMPERF_CAPABILITY)
-			acpi_cpufreq_driver.getavg = get_measured_perf;
-	}
+	if (cpu_has(c, X86_FEATURE_APERFMPERF))
+		acpi_cpufreq_driver.getavg = get_measured_perf;
 
 	dprintk("CPU%u - ACPI performance management activated.\n", cpu);
 	for (i = 0; i < perf->state_count; i++)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 80a722a071b..40e1835b35e 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -350,6 +350,12 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
 	}
 
+	if (c->cpuid_level > 6) {
+		unsigned ecx = cpuid_ecx(6);
+		if (ecx & 0x01)
+			set_cpu_cap(c, X86_FEATURE_APERFMPERF);
+	}
+
 	if (cpu_has_xmm2)
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
 	if (cpu_has_ds) {
-- 
cgit v1.2.3


From 5cbc19a983141729d716be17197028434127b376 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 2 Sep 2009 11:49:52 +0200
Subject: x86: Add generic aperf/mperf code

Move some of the aperf/mperf code out from the cpufreq driver
thingy so that other people can enjoy it too.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: cpufreq@vger.kernel.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h           | 30 ++++++++++++
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 79 ++++--------------------------
 2 files changed, 39 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index e08ea043e08..4ae2ccfed63 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -27,6 +27,7 @@ struct mm_struct;
 #include <linux/cpumask.h>
 #include <linux/cache.h>
 #include <linux/threads.h>
+#include <linux/math64.h>
 #include <linux/init.h>
 
 /*
@@ -1020,4 +1021,33 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
 extern int get_tsc_mode(unsigned long adr);
 extern int set_tsc_mode(unsigned int val);
 
+struct aperfmperf {
+	u64 aperf, mperf;
+};
+
+static inline void get_aperfmperf(struct aperfmperf *am)
+{
+	WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_APERFMPERF));
+
+	rdmsrl(MSR_IA32_APERF, am->aperf);
+	rdmsrl(MSR_IA32_MPERF, am->mperf);
+}
+
+#define APERFMPERF_SHIFT 10
+
+static inline
+unsigned long calc_aperfmperf_ratio(struct aperfmperf *old,
+				    struct aperfmperf *new)
+{
+	u64 aperf = new->aperf - old->aperf;
+	u64 mperf = new->mperf - old->mperf;
+	unsigned long ratio = aperf;
+
+	mperf >>= APERFMPERF_SHIFT;
+	if (mperf)
+		ratio = div64_u64(aperf, mperf);
+
+	return ratio;
+}
+
 #endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 509e6a7db71..4109679863c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -70,11 +70,7 @@ struct acpi_cpufreq_data {
 
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
 
-struct acpi_msr_data {
-	u64 saved_aperf, saved_mperf;
-};
-
-static DEFINE_PER_CPU(struct acpi_msr_data, msr_data);
+static DEFINE_PER_CPU(struct aperfmperf, old_perf);
 
 DEFINE_TRACE(power_mark);
 
@@ -243,23 +239,12 @@ static u32 get_cur_val(const struct cpumask *mask)
 	return cmd.val;
 }
 
-struct perf_pair {
-	union {
-		struct {
-			u32 lo;
-			u32 hi;
-		} split;
-		u64 whole;
-	} aperf, mperf;
-};
-
 /* Called via smp_call_function_single(), on the target CPU */
 static void read_measured_perf_ctrs(void *_cur)
 {
-	struct perf_pair *cur = _cur;
+	struct aperfmperf *am = _cur;
 
-	rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi);
-	rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi);
+	get_aperfmperf(am);
 }
 
 /*
@@ -278,63 +263,17 @@ static void read_measured_perf_ctrs(void *_cur)
 static unsigned int get_measured_perf(struct cpufreq_policy *policy,
 				      unsigned int cpu)
 {
-	struct perf_pair readin, cur;
-	unsigned int perf_percent;
+	struct aperfmperf perf;
+	unsigned long ratio;
 	unsigned int retval;
 
-	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
+	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1))
 		return 0;
 
-	cur.aperf.whole = readin.aperf.whole -
-				per_cpu(msr_data, cpu).saved_aperf;
-	cur.mperf.whole = readin.mperf.whole -
-				per_cpu(msr_data, cpu).saved_mperf;
-	per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole;
-	per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole;
-
-#ifdef __i386__
-	/*
-	 * We dont want to do 64 bit divide with 32 bit kernel
-	 * Get an approximate value. Return failure in case we cannot get
-	 * an approximate value.
-	 */
-	if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) {
-		int shift_count;
-		u32 h;
-
-		h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi);
-		shift_count = fls(h);
-
-		cur.aperf.whole >>= shift_count;
-		cur.mperf.whole >>= shift_count;
-	}
-
-	if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {
-		int shift_count = 7;
-		cur.aperf.split.lo >>= shift_count;
-		cur.mperf.split.lo >>= shift_count;
-	}
-
-	if (cur.aperf.split.lo && cur.mperf.split.lo)
-		perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo;
-	else
-		perf_percent = 0;
-
-#else
-	if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) {
-		int shift_count = 7;
-		cur.aperf.whole >>= shift_count;
-		cur.mperf.whole >>= shift_count;
-	}
-
-	if (cur.aperf.whole && cur.mperf.whole)
-		perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole;
-	else
-		perf_percent = 0;
-
-#endif
+	ratio = calc_aperfmperf_ratio(&per_cpu(old_perf, cpu), &perf);
+	per_cpu(old_perf, cpu) = perf;
 
-	retval = (policy->cpuinfo.max_freq * perf_percent) / 100;
+	retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT;
 
 	return retval;
 }
-- 
cgit v1.2.3


From 47fe38fcff0517e67d395c039d2e26d2de688a60 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 2 Sep 2009 13:49:18 +0200
Subject: x86: sched: Provide arch implementations using aperf/mperf

APERF/MPERF support for cpu_power.

APERF/MPERF is arch defined to be a relative scale of work capacity
per logical cpu, this is assumed to include SMT and Turbo mode.

APERF/MPERF are specified to both reset to 0 when either counter
wraps, which is highly inconvenient, since that'll give a blimp
when that happens. The manual specifies writing 0 to the counters
after each read, but that's 1) too expensive, and 2) destroys the
possibility of sharing these counters with other users, so we live
with the blimp - the other existing user does too.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/Makefile |  2 +-
 arch/x86/kernel/cpu/sched.c  | 55 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/kernel/cpu/sched.c

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index c1f253dac15..8dd30638fe4 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -13,7 +13,7 @@ CFLAGS_common.o		:= $(nostackp)
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
-obj-y			+= vmware.o hypervisor.o
+obj-y			+= vmware.o hypervisor.o sched.o
 
 obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
diff --git a/arch/x86/kernel/cpu/sched.c b/arch/x86/kernel/cpu/sched.c
new file mode 100644
index 00000000000..6c00a8f3cce
--- /dev/null
+++ b/arch/x86/kernel/cpu/sched.c
@@ -0,0 +1,55 @@
+#include <linux/sched.h>
+#include <linux/math64.h>
+#include <linux/percpu.h>
+#include <linux/irqflags.h>
+
+#include <asm/cpufeature.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_SMP
+
+static DEFINE_PER_CPU(struct aperfmperf, old_perf);
+
+static unsigned long scale_aperfmperf(void)
+{
+	struct aperfmperf val, *old = &__get_cpu_var(old_perf);
+	unsigned long ratio, flags;
+
+	local_irq_save(flags);
+	get_aperfmperf(&val);
+	local_irq_restore(flags);
+
+	ratio = calc_aperfmperf_ratio(old, &val);
+	*old = val;
+
+	return ratio;
+}
+
+unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu)
+{
+	/*
+	 * do aperf/mperf on the cpu level because it includes things
+	 * like turbo mode, which are relevant to full cores.
+	 */
+	if (boot_cpu_has(X86_FEATURE_APERFMPERF))
+		return scale_aperfmperf();
+
+	/*
+	 * maybe have something cpufreq here
+	 */
+
+	return default_scale_freq_power(sd, cpu);
+}
+
+unsigned long arch_scale_smt_power(struct sched_domain *sd, int cpu)
+{
+	/*
+	 * aperf/mperf already includes the smt gain
+	 */
+	if (boot_cpu_has(X86_FEATURE_APERFMPERF))
+		return SCHED_LOAD_SCALE;
+
+	return default_scale_smt_power(sd, cpu);
+}
+
+#endif
-- 
cgit v1.2.3


From 9b6b93998a0d9c44d6701be5b472f3302c3a8596 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Tue, 25 Aug 2009 20:54:10 +0200
Subject: [IA64] pci_br, fix infinite loop in find_free_ate()

When
* there is almost out of ates
* one asks for more than one ate
* there are some available at the end of ate array
then the inner for loop will end without incrementing 'index'. This
means the outer loop will start at the same point finding it's available
and runs the inner loop again from the same index. This repeats forever.

Hence make sure we check we were at the end of ate array and return
an error in such case.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Found-by: Jeff Mahoney <jeffm@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/sn/pci/pcibr/pcibr_ate.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
index 239b3cedcf2..5bc34eac9e0 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
@@ -54,6 +54,8 @@ static int find_free_ate(struct ate_resource *ate_resource, int start,
 					break;
 				}
 			}
+			if (i >= ate_resource->num_ate)
+				return -1;
 		} else
 			index++;	/* Try next ate */
 	}
-- 
cgit v1.2.3


From f172468a142c6989144ccb827c1b57c69229e8ba Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 31 Jul 2009 16:57:51 -0400
Subject: [IA64] Use .ref.text, not .text.init for start_ap.

It seems that start_ap doesn't need to be in a special location in the
kernel, but it references some init code so it should be in .ref.text.

Since this is the only thing in the .text.head section, eliminate
.text.head from the linker script.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/head.S        | 2 +-
 arch/ia64/kernel/vmlinux.lds.S | 2 --
 2 files changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index e1f97ac9eef..12305d3d483 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -181,7 +181,7 @@ swapper_pg_dir:
 halt_msg:
 	stringz "Halting kernel\n"
 
-	.section .text.head,"ax"
+	__REF
 
 	.global start_ap
 
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 4a95e86b9ac..fa3a558e3d7 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -51,8 +51,6 @@ SECTIONS
 	KPROBES_TEXT
 	*(.gnu.linkonce.t*)
     }
-  .text.head : AT(ADDR(.text.head) - LOAD_OFFSET)
-	{ *(.text.head) }
   .text2 : AT(ADDR(.text2) - LOAD_OFFSET)
 	{ *(.text2) }
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From 2f82af08fcc7dc01a7e98a49a5995a77e32a2925 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Mon, 14 Sep 2009 03:25:28 -0400
Subject: Nicolas Pitre has a new email address

Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/boot/compressed/head-sa1100.S         | 2 +-
 arch/arm/lib/lib1funcs.S                       | 2 +-
 arch/arm/lib/sha1.S                            | 2 +-
 arch/arm/mach-sa1100/include/mach/assabet.h    | 2 +-
 arch/arm/mach-sa1100/include/mach/hardware.h   | 2 +-
 arch/arm/mach-sa1100/include/mach/memory.h     | 2 +-
 arch/arm/mach-sa1100/include/mach/neponset.h   | 2 +-
 arch/arm/mach-sa1100/include/mach/system.h     | 2 +-
 arch/arm/mach-sa1100/include/mach/uncompress.h | 2 +-
 arch/arm/mach-sa1100/pm.c                      | 2 +-
 arch/arm/mach-sa1100/time.c                    | 2 +-
 arch/arm/mm/proc-xscale.S                      | 2 +-
 arch/arm/plat-iop/setup.c                      | 2 +-
 arch/arm/plat-omap/include/mach/system.h       | 2 +-
 14 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 4c8c0e46027..6179d94dd5c 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -1,7 +1,7 @@
 /* 
  * linux/arch/arm/boot/compressed/head-sa1100.S
  * 
- * Copyright (C) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net>
  * 
  * SA1100 specific tweaks.  This is merged into head.S by the linker.
  *
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index 67964bcfc85..6dc06487f3c 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines
  *
- * Author: Nicolas Pitre <nico@cam.org>
+ * Author: Nicolas Pitre <nico@fluxnic.net>
  *   - contributed to gcc-3.4 on Sep 30, 2003
  *   - adapted for the Linux kernel on Oct 2, 2003
  */
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index 09b548cac1a..eb0edb80d7b 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -3,7 +3,7 @@
  *
  *  SHA transform optimized for ARM
  *
- *  Copyright:	(C) 2005 by Nicolas Pitre <nico@cam.org>
+ *  Copyright:	(C) 2005 by Nicolas Pitre <nico@fluxnic.net>
  *  Created:	September 17, 2005
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
index 3959b20d5d1..28c2cf50c25 100644
--- a/arch/arm/mach-sa1100/include/mach/assabet.h
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/assabet.h
  *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 60711822b12..99f5856d8de 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/hardware.h
  *
- * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1998 Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware definitions for SA1100 architecture
  *
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index e9f8eed900f..d5277f9bee7 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/memory.h
  *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@fluxnic.net>
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index d3f044f92c0..ffe2bc45eed 100644
--- a/arch/arm/mach-sa1100/include/mach/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/neponset.h
  *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 942b153e251..ba9da9f7f18 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/system.h
  *
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 714160b03d7..6cb39ddde65 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/uncompress.h
  *
- * (C) 1999 Nicolas Pitre <nico@cam.org>
+ * (C) 1999 Nicolas Pitre <nico@fluxnic.net>
  *
  * Reorganised to be machine independent.
  */
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 111cce67ad2..c83fdc80edf 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -15,7 +15,7 @@
  * 			Save more value for the resume function! Support
  * 			Bitsy/Assabet/Freebird board
  *
- * 2001-08-29:	Nicolas Pitre <nico@cam.org>
+ * 2001-08-29:	Nicolas Pitre <nico@fluxnic.net>
  * 			Cleaned up, pushed platform dependent stuff
  * 			in the platform specific files.
  *
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 711c0295c66..95d92e8e56a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -4,7 +4,7 @@
  * Copyright (C) 1998 Deborah Wallach.
  * Twiddles  (C) 1999 Hugo Fiennes <hugo@empeg.com>
  *
- * 2000/03/29 (C) Nicolas Pitre <nico@cam.org>
+ * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net>
  *	Rewritten: big cleanup, much simpler, better HZ accuracy.
  *
  */
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 0cce37b9393..423394260bc 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -17,7 +17,7 @@
  *
  * 2001 Sep 08:
  *	Completely revisited, many important fixes
- *	Nicolas Pitre <nico@cam.org>
+ *	Nicolas Pitre <nico@fluxnic.net>
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
index 9e573e78176..bade586fed0 100644
--- a/arch/arm/plat-iop/setup.c
+++ b/arch/arm/plat-iop/setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/plat-iop/setup.c
  *
- * Author: Nicolas Pitre <nico@cam.org>
+ * Author: Nicolas Pitre <nico@fluxnic.net>
  * Copyright (C) 2001 MontaVista Software, Inc.
  * Copyright (C) 2004 Intel Corporation.
  *
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 1060e345423..ed8ec747726 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -1,6 +1,6 @@
 /*
  * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
-- 
cgit v1.2.3


From ed7af3e63bd2458d5138c4b7e92fe4e1cdc97d9d Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 31 Jul 2009 16:57:52 -0400
Subject: [IA64] Use standard macros for page-aligned data.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/head.S        | 2 +-
 arch/ia64/kernel/vmlinux.lds.S | 4 +++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 12305d3d483..1a6e44515eb 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -167,7 +167,7 @@ RestRR:											\
 	mov _tmp2=((ia64_rid(IA64_REGION_ID_KERNEL, (num<<61)) << 8) | (pgsize << 2) | vhpt);; \
 	mov rr[_tmp1]=_tmp2
 
-	.section __special_page_section,"ax"
+	__PAGE_ALIGNED_DATA
 
 	.global empty_zero_page
 empty_zero_page:
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index fa3a558e3d7..b484b86da83 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -219,7 +219,9 @@ SECTIONS
 	{ *(.data.init_task) }
 
   .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
-        { *(__special_page_section)
+        {
+	PAGE_ALIGNED_DATA(PAGE_SIZE)
+	  . = ALIGN(PAGE_SIZE);
 	  __start_gate_section = .;
 	  *(.data.gate)
 	  __stop_gate_section = .;
-- 
cgit v1.2.3


From 6ae86350857bf3e862f8dcd10039ccb45e056f85 Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 31 Jul 2009 16:57:53 -0400
Subject: [IA64] Clean up linker script using standard macros.

Aside from using fewer output sections and moving some data around,
the main side effect of this change is changing the alignment of some
sections. In particular:

* cachline-aligned and read_mostly data are now aligned to
  SMP_CACHE_BYTES. (Previously, they were laid out consecutively after
  a PAGE_SIZE alignment)
* .init.ramfs is now page-aligned, per the INIT_RAM_FS
  macro. (Previously it had no explicit alignment).

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/vmlinux.lds.S | 109 +++++------------------------------------
 1 file changed, 11 insertions(+), 98 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index b484b86da83..f69f411516d 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -64,14 +64,7 @@ SECTIONS
   NOTES :code :note		/* put .notes in text and mark in PT_NOTE  */
   code_continues : {} :code	/* switch back to regular program...  */
 
-  /* Exception table */
-  . = ALIGN(16);
-  __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET)
-	{
-	  __start___ex_table = .;
-	  *(__ex_table)
-	  __stop___ex_table = .;
-	}
+  EXCEPTION_TABLE(16)
 
   /* MCA table */
   . = ALIGN(16);
@@ -113,38 +106,9 @@ SECTIONS
 
   . = ALIGN(PAGE_SIZE);
   __init_begin = .;
-  .init.text : AT(ADDR(.init.text) - LOAD_OFFSET)
-	{
-	  _sinittext = .;
-	  INIT_TEXT
-	  _einittext = .;
-	}
-
-  .init.data : AT(ADDR(.init.data) - LOAD_OFFSET)
-	{ INIT_DATA }
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET)
-	{
-	  __initramfs_start = .;
-	  *(.init.ramfs)
-	  __initramfs_end = .;
-	}
-#endif
 
-   . = ALIGN(16);
-  .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET)
-        {
-	  __setup_start = .;
-	  *(.init.setup)
-	  __setup_end = .;
-	}
-  .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET)
-	{
-	  __initcall_start = .;
-	INITCALLS
-	  __initcall_end = .;
-	}
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
 
   .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
 	{
@@ -202,22 +166,9 @@ SECTIONS
 	}
 #endif
 
-  . = ALIGN(8);
-   __con_initcall_start = .;
-  .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET)
-	{ *(.con_initcall.init) }
-  __con_initcall_end = .;
-  __security_initcall_start = .;
-  .security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET)
-	{ *(.security_initcall.init) }
-  __security_initcall_end = .;
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
-  /* The initial task and kernel stack */
-  .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET)
-	{ *(.data.init_task) }
-
   .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
         {
 	PAGE_ALIGNED_DATA(PAGE_SIZE)
@@ -236,12 +187,6 @@ SECTIONS
   				 * kernel data
 				 */
 
-  .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET)
-        { *(.data.read_mostly) }
-
-  .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET)
-        { *(.data.cacheline_aligned) }
-
   /* Per-cpu data: */
   . = ALIGN(PERCPU_PAGE_SIZE);
   PERCPU_VADDR(PERCPU_ADDR, :percpu)
@@ -258,6 +203,9 @@ SECTIONS
 		__cpu0_per_cpu = .;
   . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
 #endif
+		INIT_TASK_DATA(PAGE_SIZE)
+		CACHELINE_ALIGNED_DATA(SMP_CACHE_BYTES)
+		READ_MOSTLY_DATA(SMP_CACHE_BYTES)
 		DATA_DATA
 		*(.data1)
 		*(.gnu.linkonce.d*)
@@ -274,49 +222,14 @@ SECTIONS
   .sdata : AT(ADDR(.sdata) - LOAD_OFFSET)
 	{ *(.sdata) *(.sdata1) *(.srdata) }
   _edata  =  .;
-  __bss_start = .;
-  .sbss : AT(ADDR(.sbss) - LOAD_OFFSET)
-	{ *(.sbss) *(.scommon) }
-  .bss : AT(ADDR(.bss) - LOAD_OFFSET)
-	{ *(.bss) *(COMMON) }
-  __bss_stop = .;
+
+  BSS_SECTION(0, 0, 0)
 
   _end = .;
 
   code : { } :code
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-  /DISCARD/ : { *(.comment) }
+
+  STABS_DEBUG
+  DWARF_DEBUG
   /DISCARD/ : { *(.note) }
 }
-- 
cgit v1.2.3


From 8079ce34f2c3f5bfedcea8d4fb7290ce46ac5b56 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Mon, 31 Aug 2009 16:49:19 +0200
Subject: sfi: Remove unused code

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/sfi.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index 761df3f759c..b294b7a0d4b 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -55,16 +55,12 @@ void __init mp_sfi_register_lapic_address(unsigned long address)
 /* All CPUs enumerated by SFI must be present and enabled */
 void __cpuinit mp_sfi_register_lapic(u8 id)
 {
-	int boot_cpu = 0;
-
 	if (MAX_APICS - id <= 0) {
 		pr_warning("Processor #%d invalid (max %d)\n",
 			id, MAX_APICS);
 		return;
 	}
 
-	if (id == boot_cpu_physical_apicid)
-		boot_cpu = 1;
 	pr_info("registering lapic[%d]\n", id);
 
 	generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR)));
-- 
cgit v1.2.3


From 3834f47291df475be3f0f0fb7ccaa098967cc054 Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Mon, 14 Sep 2009 13:01:53 +0800
Subject: SFI: remove unneeded includes

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/sfi.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index b294b7a0d4b..34e09938265 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -21,22 +21,15 @@
 #define KMSG_COMPONENT "SFI"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
-#include <linux/bootmem.h>
-#include <linux/cpumask.h>
-#include <linux/module.h>
 #include <linux/acpi.h>
 #include <linux/init.h>
-#include <linux/efi.h>
-#include <linux/irq.h>
 #include <linux/sfi.h>
 #include <linux/io.h>
 
 #include <asm/io_apic.h>
-#include <asm/pgtable.h>
 #include <asm/mpspec.h>
 #include <asm/setup.h>
 #include <asm/apic.h>
-#include <asm/e820.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
-- 
cgit v1.2.3


From 59fcf48fdebe65e4774d2c7ec76b7845d281749a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 14 Sep 2009 12:25:34 +0100
Subject: ARM: 5696/1: Include device.h in VIC driver

Currently build with the next head fails on archs using PL190
VIC because when we include amba/bus.h we need to include
device.h first.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 920ced0b73c..f232941de8a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
-- 
cgit v1.2.3


From 910a17e57ab6cd22b300bde4ce5f633f175c7ccd Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Tue, 15 Sep 2009 10:23:53 +0100
Subject: ARM: 5700/1: ARM: Introduce ARM_L1_CACHE_SHIFT to define cache line
 size

Currently kernel believes that all ARM CPUs have L1_CACHE_SHIFT == 5.
It's not true at least for CPUs based on Cortex-A8.

List of CPUs with cache line size != 32 should be expanded later.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/cache.h | 2 +-
 arch/arm/mm/Kconfig          | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index feaa75f0013..66c160b8547 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -4,7 +4,7 @@
 #ifndef __ASMARM_CACHE_H
 #define __ASMARM_CACHE_H
 
-#define L1_CACHE_SHIFT		5
+#define L1_CACHE_SHIFT		CONFIG_ARM_L1_CACHE_SHIFT
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
 /*
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5fe595aeba6..8d43e58f924 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -771,3 +771,8 @@ config CACHE_XSC3L2
 	select OUTER_CACHE
 	help
 	  This option enables the L2 cache on XScale3.
+
+config ARM_L1_CACHE_SHIFT
+	int
+	default 6 if ARCH_OMAP3
+	default 5
-- 
cgit v1.2.3


From dca230f00d737353e2dffae489c916b41971921f Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Tue, 15 Sep 2009 10:26:33 +0100
Subject: ARM: 5701/1: ARM: copy_page.S: take into account the size of the
 cache line

Optimized version of copy_page() was written with assumption that cache
line size is 32 bytes. On Cortex-A8 cache line size is 64 bytes.

This patch tries to generalize copy_page() to work with any cache line
size if cache line size is multiple of 16 and page size is multiple of
two cache line size.

After this optimization we've got ~25% speedup on OMAP3(tested in
userspace).

There is test for kernelspace which trigger copy-on-write after fork():

 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>

 #define BUF_SIZE (10000*4096)
 #define NFORK 200

 int main(int argc, char **argv)
 {
         char *buf = malloc(BUF_SIZE);
         int i;

         memset(buf, 0, BUF_SIZE);

         for(i = 0; i < NFORK; i++) {
                 if (fork()) {
                         wait(NULL);
                 } else {
                         int j;

                         for(j = 0; j < BUF_SIZE; j+= 4096)
                                 buf[j] = (j & 0xFF) + 1;
                         break;
                 }
         }

         free(buf);
         return 0;
 }

Before optimization this test takes ~66 seconds, after optimization
takes ~56 seconds.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@nokia.com>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/lib/copy_page.S | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 6ae04db1ca4..6ee2f6706f8 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -12,8 +12,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 
-#define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
+#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
 
 		.text
 		.align	5
@@ -26,17 +27,16 @@
 ENTRY(copy_page)
 		stmfd	sp!, {r4, lr}			@	2
 	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r1, #32]		)
+	PLD(	pld	[r1, #L1_CACHE_BYTES]		)
 		mov	r2, #COPY_COUNT			@	1
 		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-1:	PLD(	pld	[r1, #64]		)
-	PLD(	pld	[r1, #96]		)
-2:		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
+1:	PLD(	pld	[r1, #2 * L1_CACHE_BYTES])
+	PLD(	pld	[r1, #3 * L1_CACHE_BYTES])
+2:
+	.rept	(2 * L1_CACHE_BYTES / 16 - 1)
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmia	r1!, {r3, r4, ip, lr}		@	4
+	.endr
 		subs	r2, r2, #1			@	1
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmgtia	r1!, {r3, r4, ip, lr}		@	4
-- 
cgit v1.2.3


From bc581770cfdd8c17ea17d324dc05e2f9c599e7ca Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 15 Sep 2009 17:30:37 +0100
Subject: ARM: 5580/2: ARM TCM (Tightly-Coupled Memory) support v3

This adds the TCM interface to Linux, when active, it will
detect and report TCM memories and sizes early in boot if
present, introduce generic TCM memory handling, provide a
generic TCM memory pool and select TCM memory for the U300
platform.

See the Documentation/arm/tcm.txt for documentation.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                         |   5 +
 arch/arm/include/asm/cputype.h           |   5 +
 arch/arm/include/asm/tcm.h               |  31 ++++
 arch/arm/kernel/Makefile                 |   1 +
 arch/arm/kernel/setup.c                  |   2 +
 arch/arm/kernel/tcm.c                    | 246 +++++++++++++++++++++++++++++++
 arch/arm/kernel/tcm.h                    |  17 +++
 arch/arm/kernel/vmlinux.lds.S            |  57 +++++++
 arch/arm/mach-u300/include/mach/memory.h |   8 +
 arch/arm/mm/init.c                       |   8 +
 10 files changed, 380 insertions(+)
 create mode 100644 arch/arm/include/asm/tcm.h
 create mode 100644 arch/arm/kernel/tcm.c
 create mode 100644 arch/arm/kernel/tcm.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d778a699f57..1c4119c6004 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,6 +46,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
+config HAVE_TCM
+	bool
+	select GENERIC_ALLOCATOR
+
 config NO_IOPORT
 	bool
 
@@ -649,6 +653,7 @@ config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
 	select CPU_ARM926T
+	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_TIME
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index b3e656c6fb7..54a1f1d76b1 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -63,6 +63,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
 	return read_cpuid(CPUID_CACHETYPE);
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
+{
+	return read_cpuid(CPUID_TCM);
+}
+
 /*
  * Intel's XScale3 core supports some v6 features (supersections, L2)
  * but advertises itself as v5 as it does not support the v6 ISA.  For
diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h
new file mode 100644
index 00000000000..5929ef5d927
--- /dev/null
+++ b/arch/arm/include/asm/tcm.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#ifndef __ASMARM_TCM_H
+#define __ASMARM_TCM_H
+
+#ifndef CONFIG_HAVE_TCM
+#error "You should not be including tcm.h unless you have a TCM!"
+#endif
+
+#include <linux/compiler.h>
+
+/* Tag variables with this */
+#define __tcmdata __section(.tcm.data)
+/* Tag constants with this */
+#define __tcmconst __section(.tcm.rodata)
+/* Tag functions inside TCM called from outside TCM with this */
+#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
+/* Tag function inside TCM called from inside TCM  with this */
+#define __tcmlocalfunc __section(.tcm.text)
+
+void *tcm_alloc(size_t len);
+void tcm_free(void *addr, size_t len);
+
+#endif
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 3213c9382b1..6808e01aedc 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
+obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d4d4f77c91b..c6c57b640b6 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -45,6 +45,7 @@
 
 #include "compat.h"
 #include "atags.h"
+#include "tcm.h"
 
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
@@ -749,6 +750,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	cpu_init();
+	tcm_init();
 
 	/*
 	 * Set up various architecture-specific pointers
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
new file mode 100644
index 00000000000..e50303868f1
--- /dev/null
+++ b/arch/arm/kernel/tcm.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/genalloc.h>
+#include <linux/string.h> /* memcpy */
+#include <asm/page.h> /* PAGE_SHIFT */
+#include <asm/cputype.h>
+#include <asm/mach/map.h>
+#include <mach/memory.h>
+#include "tcm.h"
+
+/* Scream and warn about misuse */
+#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
+    !defined(DTCM_OFFSET) || !defined(DTCM_END)
+#error "TCM support selected but offsets not defined!"
+#endif
+
+static struct gen_pool *tcm_pool;
+
+/* TCM section definitions from the linker */
+extern char __itcm_start, __sitcm_text, __eitcm_text;
+extern char __dtcm_start, __sdtcm_data, __edtcm_data;
+
+/*
+ * TCM memory resources
+ */
+static struct resource dtcm_res = {
+	.name = "DTCM RAM",
+	.start = DTCM_OFFSET,
+	.end = DTCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct resource itcm_res = {
+	.name = "ITCM RAM",
+	.start = ITCM_OFFSET,
+	.end = ITCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct map_desc dtcm_iomap[] __initdata = {
+	{
+		.virtual	= DTCM_OFFSET,
+		.pfn		= __phys_to_pfn(DTCM_OFFSET),
+		.length		= (DTCM_END - DTCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+static struct map_desc itcm_iomap[] __initdata = {
+	{
+		.virtual	= ITCM_OFFSET,
+		.pfn		= __phys_to_pfn(ITCM_OFFSET),
+		.length		= (ITCM_END - ITCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+/*
+ * Allocate a chunk of TCM memory
+ */
+void *tcm_alloc(size_t len)
+{
+	unsigned long vaddr;
+
+	if (!tcm_pool)
+		return NULL;
+
+	vaddr = gen_pool_alloc(tcm_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	return (void *) vaddr;
+}
+EXPORT_SYMBOL(tcm_alloc);
+
+/*
+ * Free a chunk of TCM memory
+ */
+void tcm_free(void *addr, size_t len)
+{
+	gen_pool_free(tcm_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(tcm_free);
+
+
+static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+{
+	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
+				    256, 512, 1024, -1, -1, -1, -1 };
+	u32 tcm_region;
+	int tcm_size;
+
+	/* Read the special TCM region register c9, 0 */
+	if (!type)
+		asm("mrc	p15, 0, %0, c9, c1, 0"
+		    : "=r" (tcm_region));
+	else
+		asm("mrc	p15, 0, %0, c9, c1, 1"
+		    : "=r" (tcm_region));
+
+	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
+	if (tcm_size < 0) {
+		pr_err("CPU: %sTCM of unknown size!\n",
+			type ? "I" : "D");
+	} else {
+		pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+			type ? "I" : "D",
+			tcm_size,
+			(tcm_region & 0xfffff000U),
+			(tcm_region & 1) ? "" : "not ");
+	}
+
+	if (tcm_size != expected_size) {
+		pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
+		       type ? "I" : "D",
+		       tcm_size,
+		       expected_size);
+		/* Adjust to the expected size? what can we do... */
+	}
+
+	/* Force move the TCM bank to where we want it, enable */
+	tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+
+	if (!type)
+		asm("mcr	p15, 0, %0, c9, c1, 0"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+	else
+		asm("mcr	p15, 0, %0, c9, c1, 1"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+
+	pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
+		 type ? "I" : "D",
+		 tcm_size,
+		 (tcm_region & 0xfffff000U));
+}
+
+/*
+ * This initializes the TCM memory
+ */
+void __init tcm_init(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	char *start;
+	char *end;
+	char *ram;
+
+	/* Setup DTCM if present */
+	if (tcm_status & (1 << 16)) {
+		setup_tcm_bank(0, DTCM_OFFSET,
+			       (DTCM_END - DTCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &dtcm_res);
+		iotable_init(dtcm_iomap, 1);
+		/* Copy data from RAM to DTCM */
+		start = &__sdtcm_data;
+		end   = &__edtcm_data;
+		ram   = &__dtcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+	}
+
+	/* Setup ITCM if present */
+	if (tcm_status & 1) {
+		setup_tcm_bank(1, ITCM_OFFSET,
+			       (ITCM_END - ITCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &itcm_res);
+		iotable_init(itcm_iomap, 1);
+		/* Copy code from RAM to ITCM */
+		start = &__sitcm_text;
+		end   = &__eitcm_text;
+		ram   = &__itcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+	}
+}
+
+/*
+ * This creates the TCM memory pool and has to be done later,
+ * during the core_initicalls, since the allocator is not yet
+ * up and running when the first initialization runs.
+ */
+static int __init setup_tcm_pool(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	u32 dtcm_pool_start = (u32) &__edtcm_data;
+	u32 itcm_pool_start = (u32) &__eitcm_text;
+	int ret;
+
+	/*
+	 * Set up malloc pool, 2^2 = 4 bytes granularity since
+	 * the TCM is sometimes just 4 KiB. NB: pages and cache
+	 * line alignments does not matter in TCM!
+	 */
+	tcm_pool = gen_pool_create(2, -1);
+
+	pr_debug("Setting up TCM memory pool\n");
+
+	/* Add the rest of DTCM to the TCM pool */
+	if (tcm_status & (1 << 16)) {
+		if (dtcm_pool_start < DTCM_END) {
+			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
+					   DTCM_END - dtcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU DTCM: could not add DTCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 DTCM_END - dtcm_pool_start + 1,
+				 dtcm_pool_start);
+		}
+	}
+
+	/* Add the rest of ITCM to the TCM pool */
+	if (tcm_status & 1) {
+		if (itcm_pool_start < ITCM_END) {
+			ret = gen_pool_add(tcm_pool, itcm_pool_start,
+					   ITCM_END - itcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU ITCM: could not add ITCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 ITCM_END - itcm_pool_start + 1,
+				 itcm_pool_start);
+		}
+	}
+	return 0;
+}
+
+core_initcall(setup_tcm_pool);
diff --git a/arch/arm/kernel/tcm.h b/arch/arm/kernel/tcm.h
new file mode 100644
index 00000000000..8015ad434a4
--- /dev/null
+++ b/arch/arm/kernel/tcm.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifdef CONFIG_HAVE_TCM
+void __init tcm_init(void);
+#else
+/* No TCM support, just blank inlines to be optimized out */
+inline void tcm_init(void)
+{
+}
+#endif
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 69371028a20..39d3ffb9ff2 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -198,6 +198,63 @@ SECTIONS
 	}
 	_edata_loc = __data_loc + SIZEOF(.data);
 
+#ifdef CONFIG_HAVE_TCM
+        /*
+	 * We align everything to a page boundary so we can
+	 * free it after init has commenced and TCM contents have
+	 * been copied to its destination.
+	 */
+	.tcm_start : {
+		. = ALIGN(PAGE_SIZE);
+		__tcm_start = .;
+		__itcm_start = .;
+	}
+
+	/*
+	 * Link these to the ITCM RAM
+	 * Put VMA to the TCM address and LMA to the common RAM
+	 * and we'll upload the contents from RAM to TCM and free
+	 * the used RAM after that.
+	 */
+	.text_itcm ITCM_OFFSET : AT(__itcm_start)
+	{
+		__sitcm_text = .;
+		*(.tcm.text)
+		*(.tcm.rodata)
+		. = ALIGN(4);
+		__eitcm_text = .;
+	}
+
+	/*
+	 * Reset the dot pointer, this is needed to create the
+	 * relative __dtcm_start below (to be used as extern in code).
+	 */
+	. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+	.dtcm_start : {
+		__dtcm_start = .;
+	}
+
+	/* TODO: add remainder of ITCM as well, that can be used for data! */
+	.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+	{
+		. = ALIGN(4);
+		__sdtcm_data = .;
+		*(.tcm.data)
+		. = ALIGN(4);
+		__edtcm_data = .;
+	}
+
+	/* Reset the dot pointer or the linker gets confused */
+	. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+	/* End marker for freeing TCM copy in linked object */
+	.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+		. = ALIGN(PAGE_SIZE);
+		__tcm_end = .;
+	}
+#endif
+
 	.bss : {
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index bf134bcc129..ab000df7fc0 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -34,6 +34,14 @@
 	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
 #endif
 
+/*
+ * TCM memory whereabouts
+ */
+#define ITCM_OFFSET	0xffff2000
+#define ITCM_END	0xffff3fff
+#define DTCM_OFFSET	0xffff4000
+#define DTCM_END	0xffff5fff
+
 /*
  * We enable a real big DMA buffer if need be.
  */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index ea36186f32c..764d5dc9af7 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -613,6 +613,14 @@ void __init mem_init(void)
 
 void free_initmem(void)
 {
+#ifdef CONFIG_HAVE_TCM
+	extern char *__tcm_start, *__tcm_end;
+
+	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
+				    __phys_to_pfn(__pa(__tcm_end)),
+				    "TCM link");
+#endif
+
 	if (!machine_is_integrator() && !machine_is_cintegrator())
 		totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
 					    __phys_to_pfn(__pa(__init_end)),
-- 
cgit v1.2.3


From 9e6c82cd3e1a739ef48bf8c1decc8e7a7d8de3ac Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 14 Sep 2009 12:57:11 +0100
Subject: ARM: 5698/1: MMCI pass capabilities in platform data

This makes it possible to pass down the host controller
capabilities for the MMCI driver using the platform data. It
also provides the capabilties for the U300 implementation as an
example, and makes sure the 4bit wide mode is set if this is
requested by the ios() now that we can actually set that
capability for a platform.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/mmc.h | 1 +
 arch/arm/mach-u300/mmc.c        | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index b490ecc79de..27bec555ee1 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -12,6 +12,7 @@ struct mmc_platform_data {
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
+	unsigned long capabilities;
 };
 
 #endif
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 585cc013639..089b9957b6a 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -158,6 +158,8 @@ int __devinit mmc_init(struct amba_device *adev)
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
+	mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
+		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
-- 
cgit v1.2.3


From c573b29baf3e1b71a60ee6de76dd28c9c49fb87f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Thu, 2 Jul 2009 14:08:03 +1000
Subject: arch/m68knommu/kernel/time.c: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index d182b2f7221..c2aa717de08 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -69,7 +69,7 @@ static unsigned long read_rtc_mmss(void)
 	if ((year += 1900) < 1970)
 		year += 100;
 
-	return  mktime(year, mon, day, hour, min, sec);;
+	return  mktime(year, mon, day, hour, min, sec);
 }
 
 unsigned long read_persistent_clock(void)
-- 
cgit v1.2.3


From f3aa42c6b26f502f6502ea2e07908d5768a3dd35 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Sat, 4 Jul 2009 00:13:57 +1000
Subject: m68k: remove unused elia.h include file

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/elia.h | 41 -----------------------------------------
 1 file changed, 41 deletions(-)
 delete mode 100644 arch/m68k/include/asm/elia.h

(limited to 'arch')

diff --git a/arch/m68k/include/asm/elia.h b/arch/m68k/include/asm/elia.h
deleted file mode 100644
index e037d4e2de3..00000000000
--- a/arch/m68k/include/asm/elia.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/****************************************************************************/
-
-/*
- *	elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
- *
- *	(C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
- *	(C) Copyright 1999-2000, Lineo (www.lineo.com)
- */
-
-/****************************************************************************/
-#ifndef	elia_h
-#define	elia_h
-/****************************************************************************/
-
-#include <asm/coldfire.h>
-
-#ifdef CONFIG_eLIA
-
-/*
- *	The serial port DTR and DCD lines are also on the Parallel I/O
- *	as well, so define those too.
- */
-
-#define	eLIA_DCD1		0x0001
-#define	eLIA_DCD0		0x0002
-#define	eLIA_DTR1		0x0004
-#define	eLIA_DTR0		0x0008
-
-#define	eLIA_PCIRESET		0x0020
-
-/*
- *	Kernel macros to set and unset the LEDs.
- */
-#ifndef __ASSEMBLY__
-extern unsigned short	ppdata;
-#endif /* __ASSEMBLY__ */
-
-#endif	/* CONFIG_eLIA */
-
-/****************************************************************************/
-#endif	/* elia_h */
-- 
cgit v1.2.3


From d668bf0a0d73daea4eaaf748435752f52cc077aa Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 4 Aug 2009 16:52:44 +0200
Subject: m68knommu: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/hardirq_no.h | 10 +---------
 arch/m68knommu/kernel/irq.c        |  5 -----
 2 files changed, 1 insertion(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h
index bfad28149a4..b44b14be87d 100644
--- a/arch/m68k/include/asm/hardirq_no.h
+++ b/arch/m68k/include/asm/hardirq_no.h
@@ -1,16 +1,8 @@
 #ifndef __M68K_HARDIRQ_H
 #define __M68K_HARDIRQ_H
 
-#include <linux/cache.h>
-#include <linux/threads.h>
 #include <asm/irq.h>
 
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 #define HARDIRQ_BITS	8
 
 /*
@@ -22,6 +14,6 @@ typedef struct {
 # error HARDIRQ_BITS is too low!
 #endif
 
-void ack_bad_irq(unsigned int irq);
+#include <asm-generic/hardirq.h>
 
 #endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index 56e0f4c55a6..9e0c100447c 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -29,11 +29,6 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 	set_irq_regs(oldregs);
 }
 
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq);
-}
-
 static struct irq_chip m_irq_chip = {
 	.name		= "M68K-INTC",
 	.enable		= enable_vector,
-- 
cgit v1.2.3


From 633ea5d78b8b01ba903aeaae10297033830a52dd Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Thu, 23 Apr 2009 11:03:20 +1000
Subject: m68k: merge mmu and non-mmu versions of processor.h

The mmu and non-mmu versions of processor.h have a lot of common code.
This is a strait forward merge. start_thread() could be improved, but
that is not quite as strait forward, leaving for a follow on change.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/processor.h    | 171 ++++++++++++++++++++++++++++++++++-
 arch/m68k/include/asm/processor_mm.h | 130 --------------------------
 arch/m68k/include/asm/processor_no.h | 143 -----------------------------
 3 files changed, 168 insertions(+), 276 deletions(-)
 delete mode 100644 arch/m68k/include/asm/processor_mm.h
 delete mode 100644 arch/m68k/include/asm/processor_no.h

(limited to 'arch')

diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index fc3f2c22f2b..74fd674b15a 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -1,5 +1,170 @@
-#ifdef __uClinux__
-#include "processor_no.h"
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/thread_info.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	return sw_usp;
 #else
-#include "processor_mm.h"
+	unsigned long usp;
+	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+	return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+	extern unsigned int sw_usp;
+	sw_usp = usp;
+#else
+	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_SIZE	(0xF0000000UL)
+#else
+#define TASK_SIZE	(0x0E000000UL)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#ifdef CONFIG_MMU
+#ifndef CONFIG_SUN3
+#define TASK_UNMAPPED_BASE	0xC0000000UL
+#else
+#define TASK_UNMAPPED_BASE	0x0A000000UL
+#endif
+#define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
+#else
+#define TASK_UNMAPPED_BASE	0
+#endif
+
+struct thread_struct {
+	unsigned long  ksp;		/* kernel stack pointer */
+	unsigned long  usp;		/* user stack pointer */
+	unsigned short sr;		/* saved status register */
+	unsigned short fs;		/* saved fs (sfc, dfc) */
+	unsigned long  crp[2];		/* cpu root pointer */
+	unsigned long  esp0;		/* points to SR of stack frame */
+	unsigned long  faddr;		/* info about last fault */
+	int            signo, code;
+	unsigned long  fp[8*3];
+	unsigned long  fpcntl[3];	/* fp control regs */
+	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+	struct thread_info info;
+};
+
+#define INIT_THREAD  {							\
+	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
+	.sr	= PS_S,							\
+	.fs	= __KERNEL_DS,						\
+	.info	= INIT_THREAD_INFO(init_task),				\
+}
+
+#ifdef CONFIG_MMU
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+				unsigned long usp)
+{
+	/* reads from user space */
+	set_fs(USER_DS);
+
+	regs->pc = pc;
+	regs->sr &= ~0x2000;
+	wrusp(usp);
+}
+
+#else
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#ifdef CONFIG_COLDFIRE
+#define reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
+#else
+#define reformat(_regs)		do { } while (0)
+#endif
+
+#define start_thread(_regs, _pc, _usp)                  \
+do {                                                    \
+	set_fs(USER_DS); /* reads from user space */    \
+	(_regs)->pc = (_pc);                            \
+	((struct switch_stack *)(_regs))[-1].a6 = 0;    \
+	reformat(_regs);                                \
+	if (current->mm)                                \
+		(_regs)->d5 = current->mm->start_data;  \
+	(_regs)->sr &= ~0x2000;                         \
+	wrusp(_usp);                                    \
+} while(0)
+
+#endif
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define	KSTK_EIP(tsk)	\
+    ({			\
+	unsigned long eip = 0;	 \
+	if ((tsk)->thread.esp0 > PAGE_SIZE && \
+	    (virt_addr_valid((tsk)->thread.esp0))) \
+	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+	eip; })
+#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()	barrier()
+
 #endif
diff --git a/arch/m68k/include/asm/processor_mm.h b/arch/m68k/include/asm/processor_mm.h
deleted file mode 100644
index 1f61ef53f0e..00000000000
--- a/arch/m68k/include/asm/processor_mm.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * include/asm-m68k/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/thread_info.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-
-static inline unsigned long rdusp(void)
-{
-	unsigned long usp;
-
-	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
-	return usp;
-}
-
-static inline void wrusp(unsigned long usp)
-{
-	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#ifndef CONFIG_SUN3
-#define TASK_SIZE	(0xF0000000UL)
-#else
-#define TASK_SIZE	(0x0E000000UL)
-#endif
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	STACK_TOP
-#endif
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#ifndef CONFIG_SUN3
-#define TASK_UNMAPPED_BASE	0xC0000000UL
-#else
-#define TASK_UNMAPPED_BASE	0x0A000000UL
-#endif
-#define TASK_UNMAPPED_ALIGN(addr, off)	PAGE_ALIGN(addr)
-
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned short sr;		/* saved status register */
-	unsigned short fs;		/* saved fs (sfc, dfc) */
-	unsigned long  crp[2];		/* cpu root pointer */
-	unsigned long  esp0;		/* points to SR of stack frame */
-	unsigned long  faddr;		/* info about last fault */
-	int            signo, code;
-	unsigned long  fp[8*3];
-	unsigned long  fpcntl[3];	/* fp control regs */
-	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-	struct thread_info info;
-};
-
-#define INIT_THREAD  {							\
-	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
-	.sr	= PS_S,							\
-	.fs	= __KERNEL_DS,						\
-	.info	= INIT_THREAD_INFO(init_task),				\
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-static inline void start_thread(struct pt_regs * regs, unsigned long pc,
-				unsigned long usp)
-{
-	/* reads from user space */
-	set_fs(USER_DS);
-
-	regs->pc = pc;
-	regs->sr &= ~0x2000;
-	wrusp(usp);
-}
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    (virt_addr_valid((tsk)->thread.esp0))) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()	barrier()
-
-#endif
diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h
deleted file mode 100644
index 7a1e0ba35f5..00000000000
--- a/arch/m68k/include/asm/processor_no.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * include/asm-m68knommu/processor.h
- *
- * Copyright (C) 1995 Hamish Macdonald
- */
-
-#ifndef __ASM_M68K_PROCESSOR_H
-#define __ASM_M68K_PROCESSOR_H
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <asm/types.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-
-static inline unsigned long rdusp(void)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	return(sw_usp);
-#else
-  	unsigned long usp;
-	__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
-	return usp;
-#endif
-}
-
-static inline void wrusp(unsigned long usp)
-{
-#ifdef CONFIG_COLDFIRE
-	extern unsigned int sw_usp;
-	sw_usp = usp;
-#else
-	__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
-#endif
-}
-
-/*
- * User space process size: 3.75GB. This is hardcoded into a few places,
- * so don't change it unless you know what you are doing.
- */
-#define TASK_SIZE	(0xF0000000UL)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it
- */
-#define TASK_UNMAPPED_BASE	0
-
-/* 
- * if you change this structure, you must change the code and offsets
- * in m68k/machasm.S
- */
-   
-struct thread_struct {
-	unsigned long  ksp;		/* kernel stack pointer */
-	unsigned long  usp;		/* user stack pointer */
-	unsigned short sr;		/* saved status register */
-	unsigned short fs;		/* saved fs (sfc, dfc) */
-	unsigned long  crp[2];		/* cpu root pointer */
-	unsigned long  esp0;		/* points to SR of stack frame */
-	unsigned long  fp[8*3];
-	unsigned long  fpcntl[3];	/* fp control regs */
-	unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
-};
-
-#define INIT_THREAD  {							\
-	.ksp	= sizeof(init_stack) + (unsigned long) init_stack,	\
-	.sr	= PS_S,							\
-	.fs	= __KERNEL_DS,						\
-}
-
-/*
- * Coldfire stacks need to be re-aligned on trap exit, conventional
- * 68k can handle this case cleanly.
- */
-#if defined(CONFIG_COLDFIRE)
-#define	reformat(_regs)		do { (_regs)->format = 0x4; } while(0)
-#else
-#define	reformat(_regs)		do { } while (0)
-#endif
-
-/*
- * Do necessary setup to start up a newly executed thread.
- *
- * pass the data segment into user programs if it exists,
- * it can't hurt anything as far as I can tell
- */
-#define start_thread(_regs, _pc, _usp)			\
-do {							\
-	set_fs(USER_DS); /* reads from user space */	\
-	(_regs)->pc = (_pc);				\
-	((struct switch_stack *)(_regs))[-1].a6 = 0;	\
-	reformat(_regs);				\
-	if (current->mm)				\
-		(_regs)->d5 = current->mm->start_data;	\
-	(_regs)->sr &= ~0x2000;				\
-	wrusp(_usp);					\
-} while(0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-unsigned long thread_saved_pc(struct task_struct *tsk);
-unsigned long get_wchan(struct task_struct *p);
-
-#define	KSTK_EIP(tsk)	\
-    ({			\
-	unsigned long eip = 0;	 \
-	if ((tsk)->thread.esp0 > PAGE_SIZE && \
-	    (virt_addr_valid((tsk)->thread.esp0))) \
-	      eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
-	eip; })
-#define	KSTK_ESP(tsk)	((tsk) == current ? rdusp() : (tsk)->thread.usp)
-
-#define cpu_relax()    barrier()
-
-#endif
-- 
cgit v1.2.3


From 3ddc7e261a990d03fa4e78e37e6623ca45b18d77 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 26 Jun 2009 16:51:05 +1000
Subject: m68k: merge mmu and non-mmu versions of irq.h

It is reasonably strait forward to merge the mmu and non-mmu versions
of irq.h. Most of the defines and structs are not needed on non-mmu.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/irq.h    | 135 ++++++++++++++++++++++++++++++++++++++++-
 arch/m68k/include/asm/irq_mm.h | 126 --------------------------------------
 arch/m68k/include/asm/irq_no.h |  26 --------
 3 files changed, 132 insertions(+), 155 deletions(-)
 delete mode 100644 arch/m68k/include/asm/irq_mm.h
 delete mode 100644 arch/m68k/include/asm/irq_no.h

(limited to 'arch')

diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index d031416595b..907eff1edd2 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -1,5 +1,134 @@
-#ifdef __uClinux__
-#include "irq_no.h"
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+/*
+ * This should be the same as the max(NUM_X_SOURCES) for all the
+ * different m68k hosts compiled into the kernel.
+ * Currently the Atari has 72 and the Amiga 24, but if both are
+ * supported in the kernel it is better to make room for 72.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define NR_IRQS 256
+#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+#define NR_IRQS 200
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#define NR_IRQS 72
+#elif defined(CONFIG_Q40)
+#define NR_IRQS	43
+#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU)
+#define NR_IRQS	32
+#elif defined(CONFIG_APOLLO)
+#define NR_IRQS	24
+#elif defined(CONFIG_HP300)
+#define NR_IRQS	8
 #else
-#include "irq_mm.h"
+#define NR_IRQS	0
 #endif
+
+#ifdef CONFIG_MMU
+
+#include <linux/linkage.h>
+#include <linux/hardirq.h>
+#include <linux/irqreturn.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession.  Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ_SPURIOUS	0
+
+#define IRQ_AUTO_1	1	/* level 1 interrupt */
+#define IRQ_AUTO_2	2	/* level 2 interrupt */
+#define IRQ_AUTO_3	3	/* level 3 interrupt */
+#define IRQ_AUTO_4	4	/* level 4 interrupt */
+#define IRQ_AUTO_5	5	/* level 5 interrupt */
+#define IRQ_AUTO_6	6	/* level 6 interrupt */
+#define IRQ_AUTO_7	7	/* level 7 interrupt (non-maskable) */
+
+#define IRQ_USER	8
+
+extern unsigned int irq_canonicalize(unsigned int irq);
+
+struct pt_regs;
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
+ */
+#ifndef MACH_AMIGA_ONLY
+#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
+#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
+#define IRQ_FLG_FAST	(0x0004)
+#define IRQ_FLG_SLOW	(0x0008)
+#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
+#endif
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+	irqreturn_t	(*handler)(int, void *);
+	void		*dev_id;
+	struct irq_node *next;
+	unsigned long	flags;
+	const char	*devname;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+struct irq_handler {
+	int		(*handler)(int, void *);
+	unsigned long	flags;
+	void		*dev_id;
+	const char	*devname;
+};
+
+struct irq_controller {
+	const char *name;
+	spinlock_t lock;
+	int (*startup)(unsigned int irq);
+	void (*shutdown)(unsigned int irq);
+	void (*enable)(unsigned int irq);
+	void (*disable)(unsigned int irq);
+};
+
+extern int m68k_irq_startup(unsigned int);
+extern void m68k_irq_shutdown(unsigned int);
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
+				      void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
+
+asmlinkage void m68k_handle_int(unsigned int);
+asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+
+#else
+#define irq_canonicalize(irq)  (irq)
+#endif /* CONFIG_MMU */
+
+#endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h
deleted file mode 100644
index 0cab42cad79..00000000000
--- a/arch/m68k/include/asm/irq_mm.h
+++ /dev/null
@@ -1,126 +0,0 @@
-#ifndef _M68K_IRQ_H_
-#define _M68K_IRQ_H_
-
-#include <linux/linkage.h>
-#include <linux/hardirq.h>
-#include <linux/irqreturn.h>
-#include <linux/spinlock_types.h>
-
-/*
- * This should be the same as the max(NUM_X_SOURCES) for all the
- * different m68k hosts compiled into the kernel.
- * Currently the Atari has 72 and the Amiga 24, but if both are
- * supported in the kernel it is better to make room for 72.
- */
-#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
-#define NR_IRQS 200
-#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
-#define NR_IRQS 72
-#elif defined(CONFIG_Q40)
-#define NR_IRQS	43
-#elif defined(CONFIG_AMIGA)
-#define NR_IRQS	32
-#elif defined(CONFIG_APOLLO)
-#define NR_IRQS	24
-#elif defined(CONFIG_HP300)
-#define NR_IRQS	8
-#else
-#define NR_IRQS	0
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-/*
- * Interrupt source definitions
- * General interrupt sources are the level 1-7.
- * Adding an interrupt service routine for one of these sources
- * results in the addition of that routine to a chain of routines.
- * Each one is called in succession.  Each individual interrupt
- * service routine should determine if the device associated with
- * that routine requires service.
- */
-
-#define IRQ_SPURIOUS	0
-
-#define IRQ_AUTO_1	1	/* level 1 interrupt */
-#define IRQ_AUTO_2	2	/* level 2 interrupt */
-#define IRQ_AUTO_3	3	/* level 3 interrupt */
-#define IRQ_AUTO_4	4	/* level 4 interrupt */
-#define IRQ_AUTO_5	5	/* level 5 interrupt */
-#define IRQ_AUTO_6	6	/* level 6 interrupt */
-#define IRQ_AUTO_7	7	/* level 7 interrupt (non-maskable) */
-
-#define IRQ_USER	8
-
-extern unsigned int irq_canonicalize(unsigned int irq);
-
-struct pt_regs;
-
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
-#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
-#define IRQ_FLG_FAST	(0x0004)
-#define IRQ_FLG_SLOW	(0x0008)
-#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
-#endif
-
-/*
- * This structure is used to chain together the ISRs for a particular
- * interrupt source (if it supports chaining).
- */
-typedef struct irq_node {
-	irqreturn_t	(*handler)(int, void *);
-	void		*dev_id;
-	struct irq_node *next;
-	unsigned long	flags;
-	const char	*devname;
-} irq_node_t;
-
-/*
- * This structure has only 4 elements for speed reasons
- */
-struct irq_handler {
-	int		(*handler)(int, void *);
-	unsigned long	flags;
-	void		*dev_id;
-	const char	*devname;
-};
-
-struct irq_controller {
-	const char *name;
-	spinlock_t lock;
-	int (*startup)(unsigned int irq);
-	void (*shutdown)(unsigned int irq);
-	void (*enable)(unsigned int irq);
-	void (*disable)(unsigned int irq);
-};
-
-extern int m68k_irq_startup(unsigned int);
-extern void m68k_irq_shutdown(unsigned int);
-
-/*
- * This function returns a new irq_node_t
- */
-extern irq_node_t *new_irq_node(void);
-
-extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
-				      void (*handler)(unsigned int, struct pt_regs *));
-extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
-
-asmlinkage void m68k_handle_int(unsigned int);
-asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
-
-#endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_no.h b/arch/m68k/include/asm/irq_no.h
deleted file mode 100644
index 9373c31ac87..00000000000
--- a/arch/m68k/include/asm/irq_no.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _M68KNOMMU_IRQ_H_
-#define _M68KNOMMU_IRQ_H_
-
-#ifdef CONFIG_COLDFIRE
-/*
- * On the ColdFire we keep track of all vectors. That way drivers
- * can register whatever vector number they wish, and we can deal
- * with it.
- */
-#define	SYS_IRQS	256
-#define	NR_IRQS		SYS_IRQS
-
-#else
-
-/*
- * # of m68k interrupts
- */
-#define SYS_IRQS	8
-#define NR_IRQS		(24 + SYS_IRQS)
-
-#endif /* CONFIG_COLDFIRE */
-
-
-#define irq_canonicalize(irq)	(irq)
-
-#endif /* _M68KNOMMU_IRQ_H_ */
-- 
cgit v1.2.3


From 6192c1ea0ac5806592c5c9cc2b2b94b0298df02b Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Thu, 2 Jul 2009 16:11:58 +1000
Subject: m68k: merge the mmu and non-mmu versions of checksum.h

The mmu and non-mmu versions of checksum.h are mostly the same,
merge them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/checksum.h    | 173 +++++++++++++++++++++++++++++++++++-
 arch/m68k/include/asm/checksum_mm.h | 148 ------------------------------
 arch/m68k/include/asm/checksum_no.h | 132 ---------------------------
 arch/m68knommu/lib/checksum.c       |  11 +--
 4 files changed, 171 insertions(+), 293 deletions(-)
 delete mode 100644 arch/m68k/include/asm/checksum_mm.h
 delete mode 100644 arch/m68k/include/asm/checksum_no.h

(limited to 'arch')

diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
index 1cf54476745..ec514485c8b 100644
--- a/arch/m68k/include/asm/checksum.h
+++ b/arch/m68k/include/asm/checksum.h
@@ -1,5 +1,170 @@
-#ifdef __uClinux__
-#include "checksum_no.h"
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+						void *dst,
+						int len, __wsum sum,
+						int *csum_err);
+
+extern __wsum csum_partial_copy_nocheck(const void *src,
+					      void *dst, int len,
+					      __wsum sum);
+
+
+#ifdef CONFIG_COLDFIRE
+
+/*
+ *	The ColdFire cores don't support all the 68k instructions used
+ *	in the optimized checksum code below. So it reverts back to using
+ *	more standard C coded checksums. The fast checksum code is
+ *	significantly larger than the optimized version, so it is not
+ *	inlined here.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp = (__force u32)sum;
+
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+	tmp = (tmp & 0xffff) + (tmp >> 16);
+
+	return (__force __sum16)~tmp;
+}
+
 #else
-#include "checksum_mm.h"
-#endif
+
+/*
+ *	This is a version of ip_fast_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum = 0;
+	unsigned long tmp;
+
+	__asm__ ("subqw #1,%2\n"
+		 "1:\t"
+		 "movel %1@+,%3\n\t"
+		 "addxl %3,%0\n\t"
+		 "dbra  %2,1b\n\t"
+		 "movel %0,%3\n\t"
+		 "swap  %3\n\t"
+		 "addxw %3,%0\n\t"
+		 "clrw  %3\n\t"
+		 "addxw %3,%0\n\t"
+		 : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
+		 : "0" (sum), "1" (iph), "2" (ihl)
+		 : "memory");
+	return (__force __sum16)~sum;
+}
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp = (__force u32)sum;
+
+	__asm__("swap %1\n\t"
+		"addw %1, %0\n\t"
+		"clrw %1\n\t"
+		"addxw %1, %0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "0" (sum), "1" (tmp));
+
+	return (__force __sum16)~sum;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	__asm__ ("addl  %2,%0\n\t"
+		 "addxl %3,%0\n\t"
+		 "addxl %4,%0\n\t"
+		 "clrl %1\n\t"
+		 "addxl %1,%0"
+		 : "=&d" (sum), "=d" (saddr)
+		 : "g" (daddr), "1" (saddr), "d" (len + proto),
+		   "0" (sum));
+	return sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, unsigned short proto, __wsum sum)
+{
+	register unsigned long tmp;
+	__asm__("addl %2@,%0\n\t"
+		"movel %2@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %2@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@,%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(4),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(8),%1\n\t"
+		"addxl %1,%0\n\t"
+		"movel %3@(12),%1\n\t"
+		"addxl %1,%0\n\t"
+		"addxl %4,%0\n\t"
+		"clrl %1\n\t"
+		"addxl %1,%0"
+		: "=&d" (sum), "=&d" (tmp)
+		: "a" (saddr), "a" (daddr), "d" (len + proto),
+		  "0" (sum));
+
+	return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/checksum_mm.h b/arch/m68k/include/asm/checksum_mm.h
deleted file mode 100644
index 494f9aec37e..00000000000
--- a/arch/m68k/include/asm/checksum_mm.h
+++ /dev/null
@@ -1,148 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
-						void *dst,
-						int len, __wsum sum,
-						int *csum_err);
-
-extern __wsum csum_partial_copy_nocheck(const void *src,
-					      void *dst, int len,
-					      __wsum sum);
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- *
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	unsigned int sum = 0;
-	unsigned long tmp;
-
-	__asm__ ("subqw #1,%2\n"
-		 "1:\t"
-		 "movel %1@+,%3\n\t"
-		 "addxl %3,%0\n\t"
-		 "dbra  %2,1b\n\t"
-		 "movel %0,%3\n\t"
-		 "swap  %3\n\t"
-		 "addxw %3,%0\n\t"
-		 "clrw  %3\n\t"
-		 "addxw %3,%0\n\t"
-		 : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
-		 : "0" (sum), "1" (iph), "2" (ihl)
-		 : "memory");
-	return (__force __sum16)~sum;
-}
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-	__asm__("swap %1\n\t"
-		"addw %1, %0\n\t"
-		"clrw %1\n\t"
-		"addxw %1, %0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "0" (sum), "1" (tmp));
-	return (__force __sum16)~sum;
-}
-
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("addl  %2,%0\n\t"
-		 "addxl %3,%0\n\t"
-		 "addxl %4,%0\n\t"
-		 "clrl %1\n\t"
-		 "addxl %1,%0"
-		 : "=&d" (sum), "=d" (saddr)
-		 : "g" (daddr), "1" (saddr), "d" (len + proto),
-		   "0" (sum));
-	return sum;
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
-{
-	register unsigned long tmp;
-	__asm__("addl %2@,%0\n\t"
-		"movel %2@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@,%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"addxl %4,%0\n\t"
-		"clrl %1\n\t"
-		"addxl %1,%0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "a" (saddr), "a" (daddr), "d" (len + proto),
-		  "0" (sum));
-
-	return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/checksum_no.h b/arch/m68k/include/asm/checksum_no.h
deleted file mode 100644
index 81883482ffb..00000000000
--- a/arch/m68k/include/asm/checksum_no.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _M68K_CHECKSUM_H
-#define _M68K_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-	int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src,
-	void *dst, int len, __wsum sum, int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- *	Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
-	unsigned int tmp = (__force u32)sum;
-#ifdef CONFIG_COLDFIRE
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	tmp = (tmp & 0xffff) + (tmp >> 16);
-	return (__force __sum16)~tmp;
-#else
-	__asm__("swap %1\n\t"
-		"addw %1, %0\n\t"
-		"clrw %1\n\t"
-		"addxw %1, %0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "0" (sum), "1" (sum));
-	return (__force __sum16)~sum;
-#endif
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	__asm__ ("addl  %1,%0\n\t"
-		 "addxl %4,%0\n\t"
-		 "addxl %5,%0\n\t"
-		 "clrl %1\n\t"
-		 "addxl %1,%0"
-		 : "=&d" (sum), "=&d" (saddr)
-		 : "0" (daddr), "1" (saddr), "d" (len + proto),
-		   "d"(sum));
-	return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
-{
-	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
-{
-	register unsigned long tmp;
-	__asm__("addl %2@,%0\n\t"
-		"movel %2@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %2@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@,%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(4),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(8),%1\n\t"
-		"addxl %1,%0\n\t"
-		"movel %3@(12),%1\n\t"
-		"addxl %1,%0\n\t"
-		"addxl %4,%0\n\t"
-		"clrl %1\n\t"
-		"addxl %1,%0"
-		: "=&d" (sum), "=&d" (tmp)
-		: "a" (saddr), "a" (daddr), "d" (len + proto),
-		  "0" (sum));
-
-	return csum_fold(sum);
-}
-
-#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68knommu/lib/checksum.c b/arch/m68knommu/lib/checksum.c
index 269d83bfbbe..eccf25d3d73 100644
--- a/arch/m68knommu/lib/checksum.c
+++ b/arch/m68knommu/lib/checksum.c
@@ -92,6 +92,7 @@ out:
 	return result;
 }
 
+#ifdef CONFIG_COLDFIRE
 /*
  *	This is a version of ip_compute_csum() optimized for IP headers,
  *	which always checksum on 4 octet boundaries.
@@ -100,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	return (__force __sum16)~do_csum(iph,ihl*4);
 }
+#endif
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -126,15 +128,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum)
 
 EXPORT_SYMBOL(csum_partial);
 
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
 /*
  * copy from fs while checksumming, otherwise like csum_partial
  */
-- 
cgit v1.2.3


From cba89e231f97139dc6013030210624efd1087f68 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 12 Jun 2009 15:11:17 +1000
Subject: m68k: merge mmu and non-mmu versions of dma.h

The non-mmu version of dma.h contains a lot of ColdFire specific DMA
support, but also all of the base m68k support. So use the non-mmu
version of dma.h for all.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/dma.h    | 492 +++++++++++++++++++++++++++++++++++++++-
 arch/m68k/include/asm/dma_mm.h |  16 --
 arch/m68k/include/asm/dma_no.h | 494 -----------------------------------------
 3 files changed, 489 insertions(+), 513 deletions(-)
 delete mode 100644 arch/m68k/include/asm/dma_mm.h
 delete mode 100644 arch/m68k/include/asm/dma_no.h

(limited to 'arch')

diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index b82e660cf1c..3b85f6e6c09 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -1,5 +1,491 @@
-#ifdef __uClinux__
-#include "dma_no.h"
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ *               Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
 #else
-#include "dma_mm.h"
+#define MAX_M68K_DMA_CHANNELS 2
 #endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	            0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD          2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG          4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         5
+/* I/O to memory, 8 bits, single-address-mode */
+#define DMA_MODE_READ_SINGLE        8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE       9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE  10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE  12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF  0x01
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF  0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG  0x00
+#define DMA_MODE_SIZE_BYTE  0x01
+#define DMA_MODE_SIZE_WORD  0x02
+#define DMA_MODE_SIZE_LINE  0x03
+
+/*
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned char  *dmapb;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned char  *dmabp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+  dmabp = (unsigned char *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+
+  // Set command register
+  dmawp[MCFDMA_DCR] =
+    MCFDMA_DCR_INT |         // Enable completion irq
+    MCFDMA_DCR_CS |          // Force one xfer per request
+    MCFDMA_DCR_AA |          // Enable auto alignment
+    // single-address-mode
+    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+    // sets s_rw (-> r/w) high if Memory to I/0
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+    // Memory to I/O or I/O to Memory
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+    // 32 bit, 16 bit or 8 bit transfers
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+                                   MCFDMA_DCR_SSIZE_BYTE)) |
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+                                   MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_SAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  unsigned short count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  count = dmawp[MCFDMA_BCR];
+  return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping.  For instance, with the exception of the 16-bit
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA.  All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose.  This puts a crimp in distinguishing between the 'device
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value.  Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit.  Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned int  *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned int   *dmalp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+
+  // Set command register
+  dmalp[MCFDMA_DMR] =
+    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
+    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
+    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data.
+    // source static-address-mode
+    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+    // dest static-address-mode
+    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+
+  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_DSAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DDAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned int *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned int *dmalp;
+  unsigned int count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  count = dmalp[MCFDMA_DBCR];
+  return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+
+/* it's useless on the m68k, but unfortunately needed by the new
+   bootmem allocator (but this should do it for this) */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+#define MAX_DMA_CHANNELS 8
+
+extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);	/* release it again */
+
+#define isa_dma_bridge_buggy    (0)
+
+#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h
deleted file mode 100644
index 4240fbc946f..00000000000
--- a/arch/m68k/include/asm/dma_mm.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
-
-
-/* it's useless on the m68k, but unfortunately needed by the new
-   bootmem allocator (but this should do it for this) */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-#define MAX_DMA_CHANNELS 8
-
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-#define isa_dma_bridge_buggy    (0)
-
-#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h
deleted file mode 100644
index 939a0205621..00000000000
--- a/arch/m68k/include/asm/dma_no.h
+++ /dev/null
@@ -1,494 +0,0 @@
-#ifndef _M68K_DMA_H
-#define _M68K_DMA_H 1
- 
-//#define	DMA_DEBUG	1
-
-
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- *               Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
-	defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M532x)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	            0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD          2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG          4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         5
-/* I/O to memory, 8 bits, single-address-mode */     
-#define DMA_MODE_READ_SINGLE        8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE       9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE  10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE  12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01  
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06 
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF  0x01  
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10  
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60  
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF  0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG  0x00
-#define DMA_MODE_SIZE_BYTE  0x01
-#define DMA_MODE_SIZE_WORD  0x02
-#define DMA_MODE_SIZE_LINE  0x03
-
-/* 
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned char  *dmapb;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmapb = (unsigned char *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
-  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned char  *dmabp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
-  dmabp = (unsigned char *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
-
-  // Set command register
-  dmawp[MCFDMA_DCR] =
-    MCFDMA_DCR_INT |         // Enable completion irq
-    MCFDMA_DCR_CS |          // Force one xfer per request
-    MCFDMA_DCR_AA |          // Enable auto alignment
-    // single-address-mode
-    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
-    // sets s_rw (-> r/w) high if Memory to I/0
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
-    // Memory to I/O or I/O to Memory
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
-    // 32 bit, 16 bit or 8 bit transfers
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
-                                   MCFDMA_DCR_SSIZE_BYTE)) |
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
-                                   MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
-	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_SAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
-	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
-	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  unsigned short count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  count = dmawp[MCFDMA_BCR];
-  return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping.  For instance, with the exception of the 16-bit 
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA.  All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose.  This puts a crimp in distinguishing between the 'device 
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value.  Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit.  Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned int  *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned int   *dmalp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  // Clear config errors
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
-
-  // Set command register
-  dmalp[MCFDMA_DMR] =
-    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
-    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
-    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
-    // source static-address-mode
-    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
-    // dest static-address-mode
-    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
-    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-    
-  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
-  
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
-	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  // Determine which address registers are used for memory/device accesses
-  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
-    // Source incrementing, must be memory
-    dmalp[MCFDMA_DSAR] = a;
-    // Set dest address, must be device
-    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
-  } else {
-    // Destination incrementing, must be memory
-    dmalp[MCFDMA_DDAR] = a;
-    // Set source address, must be device
-    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
-	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
-	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned int *dmalp;
-  
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned int *dmalp;
-  unsigned int count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  count = dmalp[MCFDMA_DBCR];
-  return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
- 
-#define MAX_DMA_CHANNELS 8
-
-/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
-   occurrence should be flagged as an error.  */
-/* under 2.4 it is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
- 
-#endif /* _M68K_DMA_H */
-- 
cgit v1.2.3


From 584320156b7e42e74105ca78bdf895d2b0269251 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 5 Aug 2009 14:02:48 +1000
Subject: m68k: clean up comment delimiters in dma.h

Change C99 style comments to traditional K&R style.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/dma.h | 54 ++++++++++++++++++++++-----------------------
 1 file changed, 27 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index 3b85f6e6c09..6fbdfe89510 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -177,21 +177,21 @@ static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
   dmabp = (unsigned char *) dma_base_addr[dmanr];
   dmawp = (unsigned short *) dma_base_addr[dmanr];
 
-  // Clear config errors
+  /* Clear config errors */
   dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
 
-  // Set command register
+  /* Set command register */
   dmawp[MCFDMA_DCR] =
-    MCFDMA_DCR_INT |         // Enable completion irq
-    MCFDMA_DCR_CS |          // Force one xfer per request
-    MCFDMA_DCR_AA |          // Enable auto alignment
-    // single-address-mode
+    MCFDMA_DCR_INT |         /* Enable completion irq */
+    MCFDMA_DCR_CS |          /* Force one xfer per request */
+    MCFDMA_DCR_AA |          /* Enable auto alignment */
+    /* single-address-mode */
     ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
-    // sets s_rw (-> r/w) high if Memory to I/0
+    /* sets s_rw (-> r/w) high if Memory to I/0 */
     ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
-    // Memory to I/O or I/O to Memory
+    /* Memory to I/O or I/O to Memory */
     ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
-    // 32 bit, 16 bit or 8 bit transfers
+    /* 32 bit, 16 bit or 8 bit transfers */
     ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD :
      ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
                                    MCFDMA_DCR_SSIZE_BYTE)) |
@@ -219,16 +219,16 @@ static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
   dmawp = (unsigned short *) dma_base_addr[dmanr];
   dmalp = (unsigned int *) dma_base_addr[dmanr];
 
-  // Determine which address registers are used for memory/device accesses
+  /* Determine which address registers are used for memory/device accesses */
   if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
-    // Source incrementing, must be memory
+    /* Source incrementing, must be memory */
     dmalp[MCFDMA_SAR] = a;
-    // Set dest address, must be device
+    /* Set dest address, must be device */
     dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
   } else {
-    // Destination incrementing, must be memory
+    /* Destination incrementing, must be memory */
     dmalp[MCFDMA_DAR] = a;
-    // Set source address, must be device
+    /* Set source address, must be device */
     dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
   }
 
@@ -367,19 +367,19 @@ static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
   dmalp = (unsigned int *) dma_base_addr[dmanr];
   dmawp = (unsigned short *) dma_base_addr[dmanr];
 
-  // Clear config errors
+  /* Clear config errors */
   dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
 
-  // Set command register
+  /* Set command register */
   dmalp[MCFDMA_DMR] =
-    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
-    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
-    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data.
-    // source static-address-mode
+    MCFDMA_DMR_RQM_DUAL |         /* Mandatory Request Mode setting */
+    MCFDMA_DMR_DSTT_SD  |         /* Set up addressing types; set to supervisor-data. */
+    MCFDMA_DMR_SRCT_SD  |         /* Set up addressing types; set to supervisor-data. */
+    /* source static-address-mode */
     ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
-    // dest static-address-mode
+    /* dest static-address-mode */
     ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
-    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+    /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */
     (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
     (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
 
@@ -403,16 +403,16 @@ static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
 
   dmalp = (unsigned int *) dma_base_addr[dmanr];
 
-  // Determine which address registers are used for memory/device accesses
+  /* Determine which address registers are used for memory/device accesses */
   if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
-    // Source incrementing, must be memory
+    /* Source incrementing, must be memory */
     dmalp[MCFDMA_DSAR] = a;
-    // Set dest address, must be device
+    /* Set dest address, must be device */
     dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
   } else {
-    // Destination incrementing, must be memory
+    /* Destination incrementing, must be memory */
     dmalp[MCFDMA_DDAR] = a;
-    // Set source address, must be device
+    /* Set source address, must be device */
     dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
   }
 
-- 
cgit v1.2.3


From cd3dd4068db5e1258a14b63e0feaf0332640d896 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Mon, 27 Apr 2009 15:09:29 +1000
Subject: m68knommu: use general interrupt controller for ColdFire 520x family

Create general interrupt controller code for the ColdFire 520x family,
that does proper masking and unmasking of interrupts. With this in
place some of the driver hacks in place to support ColdFire interrupts
can finally go away.

Within the ColdFire family there is a variety of different interrupt
controllers in use. Some are used on multiple parts, some on only one.
There is quite some differences in some varients, so much so that
common code for all ColdFire parts would be impossible.

This commit introduces code to support one of the newer interrupt
controllers in the ColdFire 5208 and 5207 parts. It has very simple
mask and unmask operations, so is one of the easiest to support.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m520xsim.h             |  2 +
 arch/m68knommu/kernel/irq.c                  |  4 ++
 arch/m68knommu/platform/coldfire/Makefile    |  2 +-
 arch/m68knommu/platform/coldfire/intc-simr.c | 61 ++++++++++++++++++++++++++++
 4 files changed, 68 insertions(+), 1 deletion(-)
 create mode 100644 arch/m68knommu/platform/coldfire/intc-simr.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index e80b6a54ea9..e79b9bc76a1 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -22,6 +22,8 @@
 #define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
 #define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
 #define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
+#define MCFINTC_SIMR        0x1c        /* Set interrupt mask 0-63 */
+#define MCFINTC_CIMR        0x1d        /* Clear interrupt mask 0-63 */
 #define MCFINTC_ICR0        0x40        /* Base ICR register */
 
 #define MCFINT_VECBASE      64
diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index 9e0c100447c..47f6af57e18 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -29,6 +29,8 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 	set_irq_regs(oldregs);
 }
 
+#if !defined(CONFIG_M520x)
+
 static struct irq_chip m_irq_chip = {
 	.name		= "M68K-INTC",
 	.enable		= enable_vector,
@@ -50,6 +52,8 @@ void __init init_IRQ(void)
 	}
 }
 
+#endif
+
 int show_interrupts(struct seq_file *p, void *v)
 {
 	struct irqaction *ap;
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 2667323c7fe..dd242db7daa 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -17,7 +17,7 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 obj-$(CONFIG_COLDFIRE)	+= clk.o dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
-obj-$(CONFIG_M520x)	+= pit.o
+obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
 obj-$(CONFIG_M523x)	+= pit.o dma_timer.o
 obj-$(CONFIG_M5249)	+= timers.o
 obj-$(CONFIG_M527x)	+= pit.o
diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c
new file mode 100644
index 00000000000..3b614a3508f
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/intc-simr.c
@@ -0,0 +1,61 @@
+/*
+ * intc-simr.c
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+static void intc_irq_mask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 63))
+		__raw_writeb(irq - MCFINT_VECBASE, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR);
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 63))
+		__raw_writeb(irq - MCFINT_VECBASE, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR);
+}
+
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 63))
+		__raw_writeb(5, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + irq - MCFINT_VECBASE);
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+		intc_irq_set_type(irq, 0);
+	}
+}
+
-- 
cgit v1.2.3


From d0d77c26cb6195e881325befc950cc54732ba261 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Mon, 27 Apr 2009 15:15:01 +1000
Subject: m68knommu: remove per device interrupt mask setting for ColdFire 520x

With general interrupt controller code in place we don't need specific
unmasking code for the internal ColdFire 520x UARTs or ethernet (FEC).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/520x/config.c | 21 ---------------------
 1 file changed, 21 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 1c43a8aec69..6a1fd743817 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -85,16 +85,11 @@ static struct platform_device *m520x_devices[] __initdata = {
 
 static void __init m520x_uart_init_line(int line, int irq)
 {
-	u32 imr;
 	u16 par;
 	u8 par2;
 
 	writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
 
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	switch (line) {
 	case 0:
 		par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
@@ -131,7 +126,6 @@ static void __init m520x_uarts_init(void)
 
 static void __init m520x_fec_init(void)
 {
-	u32 imr;
 	u8 v;
 
 	/* Unmask FEC interrupts at ColdFire interrupt controller */
@@ -139,10 +133,6 @@ static void __init m520x_fec_init(void)
 	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40);
 	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42);
 
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0x0001FFF0;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-
 	/* Set multi-function pins to ethernet mode */
 	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC);
 	writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC);
@@ -153,17 +143,6 @@ static void __init m520x_fec_init(void)
 
 /***************************************************************************/
 
-/*
- *  Program the vector to be an auto-vectored.
- */
-
-void mcf_autovector(unsigned int vec)
-{
-    /* Everything is auto-vectored on the 520x devices */
-}
-
-/***************************************************************************/
-
 static void m520x_cpu_reset(void)
 {
 	local_irq_disable();
-- 
cgit v1.2.3


From 2fba4f0b035f7723073068cf8b3a01ec38f72ed5 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Mon, 27 Apr 2009 15:38:03 +1000
Subject: m68knommu: general interrupt controller for ColdFire many 52xx parts

Create general interrupt controller code for the many ColdFire version 2
cores that use the two region INTC interrupt controller. This includes the
523x family, 5270, 5271, 5274, 5275, and the 528x families.

This code does proper masking and unmasking of interrupts. With this in
place some of the driver hacks in place to support ColdFire interrupts
can finally go away.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/irq.c               |  3 +-
 arch/m68knommu/platform/coldfire/Makefile |  6 +-
 arch/m68knommu/platform/coldfire/intc-2.c | 93 +++++++++++++++++++++++++++++++
 3 files changed, 98 insertions(+), 4 deletions(-)
 create mode 100644 arch/m68knommu/platform/coldfire/intc-2.c

(limited to 'arch')

diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index 47f6af57e18..f9965d7ee7c 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -29,7 +29,8 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 	set_irq_regs(oldregs);
 }
 
-#if !defined(CONFIG_M520x)
+#if !defined(CONFIG_M520x) && !defined(CONFIG_M523x) && \
+    !defined(CONFIG_M527x) && !defined(CONFIG_M528x)
 
 static struct irq_chip m_irq_chip = {
 	.name		= "M68K-INTC",
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index dd242db7daa..bce9a62d3a1 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -18,11 +18,11 @@ obj-$(CONFIG_COLDFIRE)	+= clk.o dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
 obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
-obj-$(CONFIG_M523x)	+= pit.o dma_timer.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o
 obj-$(CONFIG_M5249)	+= timers.o
-obj-$(CONFIG_M527x)	+= pit.o
+obj-$(CONFIG_M527x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5272)	+= timers.o
-obj-$(CONFIG_M528x)	+= pit.o
+obj-$(CONFIG_M528x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5307)	+= timers.o
 obj-$(CONFIG_M532x)	+= timers.o
 obj-$(CONFIG_M5407)	+= timers.o
diff --git a/arch/m68knommu/platform/coldfire/intc-2.c b/arch/m68knommu/platform/coldfire/intc-2.c
new file mode 100644
index 00000000000..5598c8b8661
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/intc-2.c
@@ -0,0 +1,93 @@
+/*
+ * intc-1.c
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ *	Each vector needs a unique priority and level asscoiated with it.
+ *	We don't really care so much what they are, we don't rely on the
+ *	tranditional priority interrupt scheme of the m68k/ColdFire.
+ */
+static u8 intc_intpri = 0x36;
+
+static void intc_irq_mask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+		unsigned long imraddr;
+		u32 val, imrbit;
+
+		irq -= MCFINT_VECBASE;
+		imraddr = MCF_IPSBAR;
+		imraddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+		imraddr += (irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL;
+		imrbit = 0x1 << (irq & 0x1f);
+
+		val = __raw_readl(imraddr);
+		__raw_writel(val | imrbit, imraddr);
+	}
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 128)) {
+		unsigned long intaddr, imraddr, icraddr;
+		u32 val, imrbit;
+
+		irq -= MCFINT_VECBASE;
+		intaddr = MCF_IPSBAR;
+		intaddr += (irq & 0x40) ? MCFICM_INTC1 : MCFICM_INTC0;
+		imraddr = intaddr + ((irq & 0x20) ? MCFINTC_IMRH : MCFINTC_IMRL);
+		icraddr = intaddr + MCFINTC_ICR0 + (irq & 0x3f);
+		imrbit = 0x1 << (irq & 0x1f);
+
+		/* Don't set the "maskall" bit! */
+		if ((irq & 0x20) == 0)
+			imrbit |= 0x1;
+
+		if (__raw_readb(icraddr) == 0)
+			__raw_writeb(intc_intpri--, icraddr);
+
+		val = __raw_readl(imraddr);
+		__raw_writel(val & ~imrbit, imraddr);
+	}
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	/* Mask all interrupt sources */
+	__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+	__raw_writel(0x1, MCF_IPSBAR + MCFICM_INTC1 + MCFINTC_IMRL);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+	}
+}
+
-- 
cgit v1.2.3


From 1b718c71b7830c77a9b70826be83b899e314b585 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 28 Apr 2009 10:57:36 +1000
Subject: m68knommu: clean up ColdFire 527x interrupt setup

With the common intc-2 interrupt controller code in place the ColdFire
527x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/527x/config.c | 49 -----------------------------------
 1 file changed, 49 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c
index f746439cfd3..fa51be17283 100644
--- a/arch/m68knommu/platform/527x/config.c
+++ b/arch/m68knommu/platform/527x/config.c
@@ -116,23 +116,13 @@ static struct platform_device *m527x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m527x_uart_init_line(int line, int irq)
 {
 	u16 sepmask;
-	u32 imr;
 
 	if ((line < 0) || (line > 2))
 		return;
 
-	/* level 6, line based priority */
-	writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	/*
 	 * External Pin Mask Setting & Enable External Pin for Interface
 	 */
@@ -157,32 +147,11 @@ static void __init m527x_uarts_init(void)
 
 /***************************************************************************/
 
-static void __init m527x_fec_irq_init(int nr)
-{
-	unsigned long base;
-	u32 imr;
-
-	base = MCF_IPSBAR + (nr ? MCFICM_INTC1 : MCFICM_INTC0);
-
-	writeb(0x28, base + MCFINTC_ICR0 + 23);
-	writeb(0x27, base + MCFINTC_ICR0 + 27);
-	writeb(0x26, base + MCFINTC_ICR0 + 29);
-
-	imr = readl(base + MCFINTC_IMRH);
-	imr &= ~0xf;
-	writel(imr, base + MCFINTC_IMRH);
-	imr = readl(base + MCFINTC_IMRL);
-	imr &= ~0xff800001;
-	writel(imr, base + MCFINTC_IMRL);
-}
-
 static void __init m527x_fec_init(void)
 {
 	u16 par;
 	u8 v;
 
-	m527x_fec_irq_init(0);
-
 	/* Set multi-function pins to ethernet mode for fec0 */
 #if defined(CONFIG_M5271)
 	v = readb(MCF_IPSBAR + 0x100047);
@@ -195,8 +164,6 @@ static void __init m527x_fec_init(void)
 #endif
 
 #ifdef CONFIG_FEC2
-	m527x_fec_irq_init(1);
-
 	/* Set multi-function pins to ethernet mode for fec1 */
 	par = readw(MCF_IPSBAR + 0x100082);
 	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
@@ -207,21 +174,6 @@ static void __init m527x_fec_init(void)
 
 /***************************************************************************/
 
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
 static void m527x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -232,7 +184,6 @@ static void m527x_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_disableall();
 	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
-- 
cgit v1.2.3


From 980f9235eba5091d9fbbeb7fb72348c19d1ba710 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 28 Apr 2009 14:24:25 +1000
Subject: m68knommu: clean up ColdFire 528x interrupt setup

With the common intc-2 interrupt controller code in place the ColdFire
528x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/528x/config.c | 51 ++---------------------------------
 1 file changed, 2 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index a1d1a61c4fe..6e608d1836f 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -3,8 +3,8 @@
 /*
  *	linux/arch/m68knommu/platform/528x/config.c
  *
- *	Sub-architcture dependant initialization code for the Motorola
- *	5280 and 5282 CPUs.
+ *	Sub-architcture dependant initialization code for the Freescale
+ *	5280, 5281 and 5282 CPUs.
  *
  *	Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
  *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
@@ -15,20 +15,13 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
 /***************************************************************************/
 
 static struct mcf_platform_uart m528x_uart_platform[] = {
@@ -91,23 +84,13 @@ static struct platform_device *m528x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m528x_uart_init_line(int line, int irq)
 {
 	u8 port;
-	u32 imr;
 
 	if ((line < 0) || (line > 2))
 		return;
 
-	/* level 6, line based priority */
-	writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-
 	/* make sure PUAPAR is set for UART0 and UART1 */
 	if (line < 2) {
 		port = readb(MCF_MBAR + MCF5282_GPIO_PUAPAR);
@@ -129,21 +112,8 @@ static void __init m528x_uarts_init(void)
 
 static void __init m528x_fec_init(void)
 {
-	u32 imr;
 	u16 v16;
 
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
-	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
-	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
-
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0xf;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-	imr &= ~0xff800001;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-
 	/* Set multi-function pins to ethernet mode for fec0 */
 	v16 = readw(MCF_IPSBAR + 0x100056);
 	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
@@ -152,21 +122,6 @@ static void __init m528x_fec_init(void)
 
 /***************************************************************************/
 
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
 static void m528x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -204,8 +159,6 @@ void wildfiremod_halt(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_disableall();
-
 #ifdef CONFIG_WILDFIRE
 	mach_halt = wildfire_halt;
 #endif
-- 
cgit v1.2.3


From 1f946533bb562f5144752ea583cac45e9410fdaa Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 28 Apr 2009 15:59:10 +1000
Subject: m68knommu: clean up ColdFire 523x interrupt setup

With the common intc-2 interrupt controller code in place the ColdFire
523x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/523x/config.c | 63 -----------------------------------
 1 file changed, 63 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
index 961fefebca1..00f08d2e43b 100644
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -82,66 +82,6 @@ static struct platform_device *m523x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
-static void __init m523x_uart_init_line(int line, int irq)
-{
-	u32 imr;
-
-	if ((line < 0) || (line > 2))
-		return;
-
-	writeb(0x30+line, (INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line));
-
-	imr = readl(INTC0 + MCFINTC_IMRL);
-	imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
-	writel(imr, INTC0 + MCFINTC_IMRL);
-}
-
-static void __init m523x_uarts_init(void)
-{
-	const int nrlines = ARRAY_SIZE(m523x_uart_platform);
-	int line;
-
-	for (line = 0; (line < nrlines); line++)
-		m523x_uart_init_line(line, m523x_uart_platform[line].irq);
-}
-
-/***************************************************************************/
-
-static void __init m523x_fec_init(void)
-{
-	u32 imr;
-
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
-	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
-	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
-
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr &= ~0xf;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-	imr &= ~0xff800001;
-	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
-}
-
-/***************************************************************************/
-
-void mcf_disableall(void)
-{
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
-	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
-}
-
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 523x */
-}
-/***************************************************************************/
-
 static void m523x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -152,10 +92,7 @@ static void m523x_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_disableall();
 	mach_reset = m523x_cpu_reset;
-	m523x_uarts_init();
-	m523x_fec_init();
 }
 
 /***************************************************************************/
-- 
cgit v1.2.3


From 277c5e3e26cac45010f57a581c56476639b2cfa0 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 29 Apr 2009 12:07:13 +1000
Subject: m68knommu: general interrupt controller for ColdFire 532x parts

The ColdFire 532x family of parts uses 2 of the same INTC interrupt
controlers used in the ColdFire 520x family. So modify the code to
support both parts. The extra code for the second INTC controler in
the case of the 520x is easily optimized away to nothing.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m520xsim.h             | 15 +++++++++++++--
 arch/m68k/include/asm/m532xsim.h             | 18 ++++++++++--------
 arch/m68knommu/kernel/irq.c                  |  3 ++-
 arch/m68knommu/platform/coldfire/Makefile    |  2 +-
 arch/m68knommu/platform/coldfire/intc-simr.c | 24 ++++++++++++++++++------
 5 files changed, 44 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index e79b9bc76a1..91de39c8d86 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -11,9 +11,8 @@
 #define m520xsim_h
 /****************************************************************************/
 
-
 /*
- *  Define the 5282 SIM register set addresses.
+ *  Define the 520x SIM register set addresses.
  */
 #define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
 #define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
@@ -26,6 +25,18 @@
 #define MCFINTC_CIMR        0x1d        /* Clear interrupt mask 0-63 */
 #define MCFINTC_ICR0        0x40        /* Base ICR register */
 
+/*
+ *  The common interrupt controller code just wants to know the absolute
+ *  address to the SIMR and CIMR registers (not offsets into IPSBAR).
+ *  The 520x family only has a single INTC unit.
+ */
+#define MCFINTC0_SIMR       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR)
+#define MCFINTC0_CIMR       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR)
+#define	MCFINTC0_ICR0       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0)
+#define MCFINTC1_SIMR       (0)
+#define MCFINTC1_CIMR       (0)
+#define	MCFINTC1_ICR0       (0)
+
 #define MCFINT_VECBASE      64
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 3e80810b378..41c57e0f445 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -58,10 +58,12 @@
 
 #define	MCFSIM_IMR_MASKALL	0xFFFFFFFF	/* All SIM intr sources */
 
-#define MCFSIM_IMR_SIMR0	0xFC04801C
-#define MCFSIM_IMR_SIMR1	0xFC04C01C
-#define MCFSIM_IMR_CIMR0	0xFC04801D
-#define MCFSIM_IMR_CIMR1	0xFC04C01D
+#define	MCFINTC0_SIMR		0xFC04801C
+#define	MCFINTC0_CIMR		0xFC04801D
+#define	MCFINTC0_ICR0		0xFC048040
+#define	MCFINTC1_SIMR		0xFC04C01C
+#define	MCFINTC1_CIMR		0xFC04C01D
+#define	MCFINTC1_ICR0		0xFC04C040
 
 #define MCFSIM_ICR_TIMER1	(0xFC048040+32)
 #define MCFSIM_ICR_TIMER2	(0xFC048040+33)
@@ -87,16 +89,16 @@
 
 
 #define mcf_enable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
+	*((volatile unsigned char *) (MCFINTC0_CIMR)) = (irq);
 
 #define mcf_enable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
+	*((volatile unsigned char *) (MCFINTC1_CIMR)) = (irq);
 
 #define mcf_disable_irq0(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
+	*((volatile unsigned char *) (MCFINTC0_SIMR)) = (irq);
 
 #define mcf_disable_irq1(irq)		\
-	*((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+	*((volatile unsigned char *) (MCFINTC1_SIMR)) = (irq);
 
 /*
  *	Define the Cache register flags.
diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index f9965d7ee7c..93d567bbf33 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -30,7 +30,8 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 }
 
 #if !defined(CONFIG_M520x) && !defined(CONFIG_M523x) && \
-    !defined(CONFIG_M527x) && !defined(CONFIG_M528x)
+    !defined(CONFIG_M527x) && !defined(CONFIG_M528x) && \
+    !defined(CONFIG_M532x)
 
 static struct irq_chip m_irq_chip = {
 	.name		= "M68K-INTC",
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index bce9a62d3a1..6c5f699cf14 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_M527x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5272)	+= timers.o
 obj-$(CONFIG_M528x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5307)	+= timers.o
-obj-$(CONFIG_M532x)	+= timers.o
+obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
 obj-$(CONFIG_M5407)	+= timers.o
 
 obj-y			+= pinmux.o gpio.o
diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c
index 3b614a3508f..86fc2047d7a 100644
--- a/arch/m68knommu/platform/coldfire/intc-simr.c
+++ b/arch/m68knommu/platform/coldfire/intc-simr.c
@@ -20,20 +20,32 @@
 
 static void intc_irq_mask(unsigned int irq)
 {
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 63))
-		__raw_writeb(irq - MCFINT_VECBASE, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR);
+	if (irq >= MCFINT_VECBASE) {
+		if (irq < MCFINT_VECBASE + 64)
+			__raw_writeb(irq - MCFINT_VECBASE, MCFINTC0_SIMR);
+		else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_SIMR)
+			__raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_SIMR);
+	}
 }
 
 static void intc_irq_unmask(unsigned int irq)
 {
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 63))
-		__raw_writeb(irq - MCFINT_VECBASE, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR);
+	if (irq >= MCFINT_VECBASE) {
+		if (irq < MCFINT_VECBASE + 64)
+			__raw_writeb(irq - MCFINT_VECBASE, MCFINTC0_CIMR);
+		else if ((irq < MCFINT_VECBASE + 128) && MCFINTC1_CIMR)
+			__raw_writeb(irq - MCFINT_VECBASE - 64, MCFINTC1_CIMR);
+	}
 }
 
 static int intc_irq_set_type(unsigned int irq, unsigned int type)
 {
-	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECBASE + 63))
-		__raw_writeb(5, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + irq - MCFINT_VECBASE);
+	if (irq >= MCFINT_VECBASE) {
+		if (irq < MCFINT_VECBASE + 64)
+			__raw_writeb(5, MCFINTC0_ICR0 + irq - MCFINT_VECBASE);
+		else if ((irq < MCFINT_VECBASE) && MCFINTC1_ICR0)
+			__raw_writeb(5, MCFINTC1_ICR0 + irq - MCFINT_VECBASE - 64);
+	}
 	return 0;
 }
 
-- 
cgit v1.2.3


From 6589c1d71581618dfc344628fb425ee4f09ce904 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 29 Apr 2009 13:31:27 +1000
Subject: m68knommu: clean up ColdFire 532x interrupt setup

With the common intc-simr interrupt controller code in place the ColdFire
532x family startup code can be greatly simplified. Remove all the
interrupt masking code, and the per-device interrupt config here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/532x/config.c | 18 ------------------
 1 file changed, 18 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index 28eb9ea55f4..3d585599588 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -20,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
@@ -98,18 +97,11 @@ static struct platform_device *m532x_devices[] __initdata = {
 static void __init m532x_uart_init_line(int line, int irq)
 {
 	if (line == 0) {
-		MCF_INTC0_ICR26 = 0x3;
-		MCF_INTC0_CIMR = 26;
 		/* GPIO initialization */
 		MCF_GPIO_PAR_UART |= 0x000F;
 	} else if (line == 1) {
-		MCF_INTC0_ICR27 = 0x3;
-		MCF_INTC0_CIMR = 27;
 		/* GPIO initialization */
 		MCF_GPIO_PAR_UART |= 0x0FF0;
-	} else if (line == 2) {
-		MCF_INTC0_ICR28 = 0x3;
-		MCF_INTC0_CIMR = 28;
 	}
 }
 
@@ -125,14 +117,6 @@ static void __init m532x_uarts_init(void)
 
 static void __init m532x_fec_init(void)
 {
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	MCF_INTC0_ICR36 = 0x2;
-	MCF_INTC0_ICR40 = 0x2;
-	MCF_INTC0_ICR42 = 0x2;
-
-	MCF_INTC0_IMRH &= ~(MCF_INTC_IMRH_INT_MASK36 |
-		MCF_INTC_IMRH_INT_MASK40 | MCF_INTC_IMRH_INT_MASK42);
-
 	/* Set multi-function pins to ethernet mode for fec0 */
 	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
 		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
@@ -172,8 +156,6 @@ static void m532x_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if !defined(CONFIG_BOOTPARAM)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0x4000, 4);
-- 
cgit v1.2.3


From 33a21263bf74177209c11f08246fc308916d9ffa Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Thu, 30 Apr 2009 16:22:24 +1000
Subject: m68knommu: use common interrupt controller code for older ColdFire
 CPU's

The old ColdFire CPU's (5206, 5307, 5407, 5249 etc) use a simple
interrupt controller. Use common setup code for them. This addition
means that all ColdFire CPU's now have some specific type of interrupt
controller code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/irq.c                |  4 +--
 arch/m68knommu/platform/coldfire/Makefile  | 12 +++----
 arch/m68knommu/platform/coldfire/intc.c    | 55 ++++++++++++++++++++++++++++++
 arch/m68knommu/platform/coldfire/vectors.c | 20 +----------
 4 files changed, 63 insertions(+), 28 deletions(-)
 create mode 100644 arch/m68knommu/platform/coldfire/intc.c

(limited to 'arch')

diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index 93d567bbf33..73daaf0a455 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -29,9 +29,7 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 	set_irq_regs(oldregs);
 }
 
-#if !defined(CONFIG_M520x) && !defined(CONFIG_M523x) && \
-    !defined(CONFIG_M527x) && !defined(CONFIG_M528x) && \
-    !defined(CONFIG_M532x)
+#if !defined(CONFIG_COLDFIRE)
 
 static struct irq_chip m_irq_chip = {
 	.name		= "M68K-INTC",
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 6c5f699cf14..24ea95a2312 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -15,17 +15,17 @@
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-$(CONFIG_COLDFIRE)	+= clk.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206)	+= timers.o
-obj-$(CONFIG_M5206e)	+= timers.o
+obj-$(CONFIG_M5206)	+= timers.o intc.o
+obj-$(CONFIG_M5206e)	+= timers.o intc.o
 obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
 obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o
-obj-$(CONFIG_M5249)	+= timers.o
+obj-$(CONFIG_M5249)	+= timers.o intc.o
 obj-$(CONFIG_M527x)	+= pit.o intc-2.o
-obj-$(CONFIG_M5272)	+= timers.o
+obj-$(CONFIG_M5272)	+= timers.o intc.o
 obj-$(CONFIG_M528x)	+= pit.o intc-2.o
-obj-$(CONFIG_M5307)	+= timers.o
+obj-$(CONFIG_M5307)	+= timers.o intc.o
 obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
-obj-$(CONFIG_M5407)	+= timers.o
+obj-$(CONFIG_M5407)	+= timers.o intc.o
 
 obj-y			+= pinmux.o gpio.o
 extra-y := head.o
diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
new file mode 100644
index 00000000000..c81ab6e5cf2
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -0,0 +1,55 @@
+/*
+ * intc.c
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/traps.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc_irq_mask(unsigned int irq)
+{
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+}
+
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+		intc_irq_set_type(irq, 0);
+	}
+}
+
diff --git a/arch/m68knommu/platform/coldfire/vectors.c b/arch/m68knommu/platform/coldfire/vectors.c
index bdca0297fa9..a21d3f870b7 100644
--- a/arch/m68knommu/platform/coldfire/vectors.c
+++ b/arch/m68knommu/platform/coldfire/vectors.c
@@ -1,7 +1,7 @@
 /***************************************************************************/
 
 /*
- *	linux/arch/m68knommu/platform/5307/vectors.c
+ *	linux/arch/m68knommu/platform/coldfire/vectors.c
  *
  *	Copyright (C) 1999-2007, Greg Ungerer <gerg@snapgear.com>
  */
@@ -15,7 +15,6 @@
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
 #include <asm/mcfwdebug.h>
 
 /***************************************************************************/
@@ -79,20 +78,3 @@ void __init init_vectors(void)
 }
 
 /***************************************************************************/
-
-void enable_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-void disable_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-void ack_vector(unsigned int irq)
-{
-	/* Currently no action on ColdFire */
-}
-
-/***************************************************************************/
-- 
cgit v1.2.3


From 1985d2538cccdcdb444d03bc5994be82e85e1f60 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 1 May 2009 16:54:49 +1000
Subject: m68knommu: complete interrupt controller code for the 68328 CPU's

Define the interrupt controller structures along with the interrupt
controller code for the 68328 CPU family. This brings the interrupt
setup and control into one place for this CPU family.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68328/ints.c | 72 ++++++++++++++++++++----------------
 1 file changed, 40 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c
index 72e56d554f4..b91ee85d4b5 100644
--- a/arch/m68knommu/platform/68328/ints.c
+++ b/arch/m68knommu/platform/68328/ints.c
@@ -73,34 +73,6 @@ extern e_vector *_ramvec;
 /* The number of spurious interrupts */
 volatile unsigned int num_spurious;
 
-/*
- * This function should be called during kernel startup to initialize
- * the machine vector table.
- */
-void __init init_vectors(void)
-{
-	int i;
-
-	/* set up the vectors */
-	for (i = 72; i < 256; ++i)
-		_ramvec[i] = (e_vector) bad_interrupt;
-
-	_ramvec[32] = system_call;
-
-	_ramvec[65] = (e_vector) inthandler1;
-	_ramvec[66] = (e_vector) inthandler2;
-	_ramvec[67] = (e_vector) inthandler3;
-	_ramvec[68] = (e_vector) inthandler4;
-	_ramvec[69] = (e_vector) inthandler5;
-	_ramvec[70] = (e_vector) inthandler6;
-	_ramvec[71] = (e_vector) inthandler7;
- 
-	IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */
-
-	/* turn off all interrupts */
-	IMR = ~0;
-}
-
 /* The 68k family did not have a good way to determine the source
  * of interrupts until later in the family.  The EC000 core does
  * not provide the vector number on the stack, we vector everything
@@ -163,18 +135,54 @@ void process_int(int vec, struct pt_regs *fp)
 	}
 }
 
-void enable_vector(unsigned int irq)
+static void intc_irq_unmask(unsigned int irq)
 {
 	IMR &= ~(1<<irq);
 }
 
-void disable_vector(unsigned int irq)
+static void intc_irq_mask(unsigned int irq)
 {
 	IMR |= (1<<irq);
 }
 
-void ack_vector(unsigned int irq)
+static struct irq_chip intc_irq_chip = {
+	.name		= "M68K-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+};
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the machine vector table.
+ */
+void __init init_IRQ(void)
 {
-	/* Nothing needed */
+	int i;
+
+	/* set up the vectors */
+	for (i = 72; i < 256; ++i)
+		_ramvec[i] = (e_vector) bad_interrupt;
+
+	_ramvec[32] = system_call;
+
+	_ramvec[65] = (e_vector) inthandler1;
+	_ramvec[66] = (e_vector) inthandler2;
+	_ramvec[67] = (e_vector) inthandler3;
+	_ramvec[68] = (e_vector) inthandler4;
+	_ramvec[69] = (e_vector) inthandler5;
+	_ramvec[70] = (e_vector) inthandler6;
+	_ramvec[71] = (e_vector) inthandler7;
+
+	IVR = 0x40; /* Set DragonBall IVR (interrupt base) to 64 */
+
+	/* turn off all interrupts */
+	IMR = ~0;
+
+	for (i = 0; (i < NR_IRQS); i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+		irq_desc[i].chip = &intc_irq_chip;
+	}
 }
 
-- 
cgit v1.2.3


From 0531d7b36b9894b60ba9c0633993d49a813555ff Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 1 May 2009 17:22:36 +1000
Subject: m68knommu: complete interrupt controller code for the 68360 CPU

Define the interrupt controller structures along with the interrupt
controller code for the 68360 CPU. This brings the interrupt setup
and control into one place for this CPU family.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/68360/ints.c | 44 ++++++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/68360/ints.c b/arch/m68knommu/platform/68360/ints.c
index c36781157e0..1143f77caca 100644
--- a/arch/m68knommu/platform/68360/ints.c
+++ b/arch/m68knommu/platform/68360/ints.c
@@ -37,11 +37,33 @@ extern void *_ramvec[];
 /* The number of spurious interrupts */
 volatile unsigned int num_spurious;
 
+static void intc_irq_unmask(unsigned int irq)
+{
+	pquicc->intr_cimr |= (1 << irq);
+}
+
+static void intc_irq_mask(unsigned int irq)
+{
+	pquicc->intr_cimr &= ~(1 << irq);
+}
+
+static void intc_irq_ack(unsigned int irq)
+{
+	pquicc->intr_cisr = (1 << irq);
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "M68K-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.ack		= intc_irq_ack,
+};
+
 /*
  * This function should be called during kernel startup to initialize
  * the vector table.
  */
-void init_vectors(void)
+void init_IRQ(void)
 {
 	int i;
 	int vba = (CPM_VECTOR_BASE<<4);
@@ -109,20 +131,12 @@ void init_vectors(void)
 
 	/* turn off all CPM interrupts */
 	pquicc->intr_cimr = 0x00000000;
-}
-
-void enable_vector(unsigned int irq)
-{
-	pquicc->intr_cimr |= (1 << irq);
-}
 
-void disable_vector(unsigned int irq)
-{
-	pquicc->intr_cimr &= ~(1 << irq);
-}
-
-void ack_vector(unsigned int irq)
-{
-	pquicc->intr_cisr = (1 << irq);
+	for (i = 0; (i < NR_IRQS); i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = NULL;
+		irq_desc[i].depth = 1;
+		irq_desc[i].chip = &intc_irq_chip;
+	}
 }
 
-- 
cgit v1.2.3


From de4cbfb5994465e7c0f4cc545722b1144e8ba717 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 1 May 2009 17:23:37 +1000
Subject: m68knommu: remove the common interrupt controller structure

Each different m68knommu CPU interrupt controller type has its own
interrupt controller data structures now. Remove the old, and now not
used, common irq structs and init code from here.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/kernel/irq.c | 25 -------------------------
 1 file changed, 25 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/kernel/irq.c b/arch/m68knommu/kernel/irq.c
index 73daaf0a455..c9cac36d442 100644
--- a/arch/m68knommu/kernel/irq.c
+++ b/arch/m68knommu/kernel/irq.c
@@ -29,31 +29,6 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
 	set_irq_regs(oldregs);
 }
 
-#if !defined(CONFIG_COLDFIRE)
-
-static struct irq_chip m_irq_chip = {
-	.name		= "M68K-INTC",
-	.enable		= enable_vector,
-	.disable	= disable_vector,
-	.ack		= ack_vector,
-};
-
-void __init init_IRQ(void)
-{
-	int irq;
-
-	init_vectors();
-
-	for (irq = 0; (irq < NR_IRQS); irq++) {
-		irq_desc[irq].status = IRQ_DISABLED;
-		irq_desc[irq].action = NULL;
-		irq_desc[irq].depth = 1;
-		irq_desc[irq].chip = &m_irq_chip;
-	}
-}
-
-#endif
-
 int show_interrupts(struct seq_file *p, void *v)
 {
 	struct irqaction *ap;
-- 
cgit v1.2.3


From a3d9bf1dfdaf6f7df6c5340521dff1aafe39393f Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 6 May 2009 10:14:04 +1000
Subject: m68knommu: remove unecessary interrupt level setting in ColdFire 520x
 setup

The new code for the interrupt controller in the ColdFire 520x takes
care of all the interrupt controller setup. No manual config of the
level registers (ICR) is required by the  platform device setup code.
So remove it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/520x/config.c | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
index 6a1fd743817..92614de42cd 100644
--- a/arch/m68knommu/platform/520x/config.c
+++ b/arch/m68knommu/platform/520x/config.c
@@ -81,15 +81,11 @@ static struct platform_device *m520x_devices[] __initdata = {
 
 /***************************************************************************/
 
-#define	INTC0	(MCF_MBAR + MCFICM_INTC0)
-
 static void __init m520x_uart_init_line(int line, int irq)
 {
 	u16 par;
 	u8 par2;
 
-	writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
-
 	switch (line) {
 	case 0:
 		par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
@@ -128,11 +124,6 @@ static void __init m520x_fec_init(void)
 {
 	u8 v;
 
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 36);
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40);
-	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42);
-
 	/* Set multi-function pins to ethernet mode */
 	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC);
 	writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC);
-- 
cgit v1.2.3


From f1a59d244abd8d7b94b90f45ee5e0988e5a154cb Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 6 May 2009 11:36:00 +1000
Subject: m68knommu: remove interrupt masking from ColdFire pit timer

With proper interrupt controller code in place there is no need for
devices like the timers to have custom interrupt masking code.
Remove it (and the defines that go along with it).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m520xsim.h       |  4 ----
 arch/m68k/include/asm/mcfsim.h         | 14 --------------
 arch/m68knommu/platform/coldfire/pit.c |  8 --------
 3 files changed, 26 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 91de39c8d86..ed2b69b9680 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -124,10 +124,6 @@
 #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
 #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
 
-#define ICR_INTRCONF		0x05
-#define MCFPIT_IMR		MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
-
 /*
  *  Reset Controll Unit.
  */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index da3f2ceff3a..b90425fb50f 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -101,20 +101,6 @@
 #endif
 
 
-/*
- *	PIT interrupt settings, if not found in mXXXXsim.h file.
- */
-#ifndef	ICR_INTRCONF
-#define	ICR_INTRCONF		0x2b            /* PIT1 level 5, priority 3 */
-#endif
-#ifndef	MCFPIT_IMR
-#define	MCFPIT_IMR		MCFINTC_IMRH
-#endif
-#ifndef	MCFPIT_IMR_IBIT
-#define	MCFPIT_IMR_IBIT		(1 << (MCFINT_PIT1 - 32))
-#endif
-
-
 #ifndef __ASSEMBLY__
 /*
  *	Definition for the interrupt auto-vectoring support.
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 61b96211f8f..d8720ee3451 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -32,7 +32,6 @@
  */
 #define	FREQ	((MCF_CLK / 2) / 64)
 #define	TA(a)	(MCF_IPSBAR + MCFPIT_BASE1 + (a))
-#define	INTC0	(MCF_IPSBAR + MCFICM_INTC0)
 #define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
 
 static u32 pit_cnt;
@@ -154,8 +153,6 @@ static struct clocksource pit_clk = {
 
 void hw_timer_init(void)
 {
-	u32 imr;
-
 	cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id());
 	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
 	cf_pit_clockevent.max_delta_ns =
@@ -166,11 +163,6 @@ void hw_timer_init(void)
 
 	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
-	__raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1);
-	imr = __raw_readl(INTC0 + MCFPIT_IMR);
-	imr &= ~MCFPIT_IMR_IBIT;
-	__raw_writel(imr, INTC0 + MCFPIT_IMR);
-
 	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
 	clocksource_register(&pit_clk);
 }
-- 
cgit v1.2.3


From 91b1b94f88219ea1b747264f4f6995a1202566cb Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 6 May 2009 14:25:40 +1000
Subject: m68knommu: remove timer device interrupt setup for ColdFire 532x

With fully implemented interrupt controller code we don't need to do
the custom interrupt setup for the timer device of the ColdFire 532x.
Remove that code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/532x/config.c | 14 --------------
 1 file changed, 14 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index 3d585599588..66e212b58b8 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -128,20 +128,6 @@ static void __init m532x_fec_init(void)
 
 void mcf_settimericr(unsigned int timer, unsigned int level)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr;
-	unsigned char irq;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  irq = 33; icr = MCFSIM_ICR_TIMER2; break;
-		default: irq = 32; icr = MCFSIM_ICR_TIMER1; break;
-		}
-		
-		icrp = (volatile unsigned char *) (icr);
-		*icrp = level;
-		mcf_enable_irq0(irq);
-	}
 }
 
 /***************************************************************************/
-- 
cgit v1.2.3


From e47cc3d6acacffdc673779a44c21a4a12b20db23 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 6 May 2009 14:28:25 +1000
Subject: m68knommu: mask off all interrupts in ColdFire intc-simr controller

The ColdFire intc-simr interrupt controller should mask off all
interrupt sources at init time. Doing it here instead of separately
in each platform setup.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m532xsim.h             | 33 ----------------------------
 arch/m68knommu/platform/coldfire/intc-simr.c |  5 +++++
 2 files changed, 5 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 41c57e0f445..021a0e15527 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -56,8 +56,6 @@
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
 
-#define	MCFSIM_IMR_MASKALL	0xFFFFFFFF	/* All SIM intr sources */
-
 #define	MCFINTC0_SIMR		0xFC04801C
 #define	MCFINTC0_CIMR		0xFC04801D
 #define	MCFINTC0_ICR0		0xFC048040
@@ -69,37 +67,6 @@
 #define MCFSIM_ICR_TIMER2	(0xFC048040+33)
 
 
-/*
- *	Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-#define	mcf_getiprl()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
-
-#define	mcf_getiprh()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
-
-
-#define mcf_enable_irq0(irq)		\
-	*((volatile unsigned char *) (MCFINTC0_CIMR)) = (irq);
-
-#define mcf_enable_irq1(irq)		\
-	*((volatile unsigned char *) (MCFINTC1_CIMR)) = (irq);
-
-#define mcf_disable_irq0(irq)		\
-	*((volatile unsigned char *) (MCFINTC0_SIMR)) = (irq);
-
-#define mcf_disable_irq1(irq)		\
-	*((volatile unsigned char *) (MCFINTC1_SIMR)) = (irq);
-
 /*
  *	Define the Cache register flags.
  */
diff --git a/arch/m68knommu/platform/coldfire/intc-simr.c b/arch/m68knommu/platform/coldfire/intc-simr.c
index 86fc2047d7a..1b01e79c2f6 100644
--- a/arch/m68knommu/platform/coldfire/intc-simr.c
+++ b/arch/m68knommu/platform/coldfire/intc-simr.c
@@ -62,6 +62,11 @@ void __init init_IRQ(void)
 
 	init_vectors();
 
+	/* Mask all interrupt sources */
+	__raw_writeb(0xff, MCFINTC0_SIMR);
+	if (MCFINTC1_SIMR)
+		__raw_writeb(0xff, MCFINTC1_SIMR);
+
 	for (irq = 0; (irq < NR_IRQS); irq++) {
 		irq_desc[irq].status = IRQ_DISABLED;
 		irq_desc[irq].action = NULL;
-- 
cgit v1.2.3


From 5938084bd8843490a4493d19fb108df70d87df2d Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 19 May 2009 13:56:44 +1000
Subject: m68knommu: move ColdFire INTC definitions to new include file

Create an mcfintc.h include file with the definitions for the old style
ColdFire interrupt controller. They are only needed on CPU's that use
this old controller - so isolate them on their own.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/mcfintc.h | 106 ++++++++++++++++++++++++++++++++++++++++
 arch/m68k/include/asm/mcfsim.h  |  81 +++---------------------------
 2 files changed, 114 insertions(+), 73 deletions(-)
 create mode 100644 arch/m68k/include/asm/mcfintc.h

(limited to 'arch')

diff --git a/arch/m68k/include/asm/mcfintc.h b/arch/m68k/include/asm/mcfintc.h
new file mode 100644
index 00000000000..a75a001e773
--- /dev/null
+++ b/arch/m68k/include/asm/mcfintc.h
@@ -0,0 +1,106 @@
+/****************************************************************************/
+
+/*
+ *	mcfintc.h -- support definitions for the simple ColdFire
+ *		     Interrupt Controller
+ *
+ * 	(C) Copyright 2009,  Greg Ungerer <gerg@uclinux.org>
+ */
+
+/****************************************************************************/
+#ifndef	mcfintc_h
+#define	mcfintc_h
+/****************************************************************************/
+
+/*
+ * Most of the older ColdFire parts use the same simple interrupt
+ * controller. This is currently used on the 5206, 5206e, 5249, 5307
+ * and 5407 parts.
+ *
+ * The builtin peripherals are masked through dedicated bits in the
+ * Interrupt Mask register (IMR) - and this is not indexed (or in any way
+ * related to) the actual interrupt number they use. So knowing the IRQ
+ * number doesn't explicitly map to a certain internal device for
+ * interrupt control purposes.
+ */
+
+/*
+ * Define the base address of the SIM within the MBAR address space.
+ */
+#define	MCFSIM_BASE		0x0		/* Base address within SIM */
+
+/*
+ * Bit definitions for the ICR family of registers.
+ */
+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+
+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
+
+/*
+ *	Bit definitions for the ICR family of registers.
+ */
+#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
+#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
+#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
+#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
+#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
+#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
+#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
+#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
+#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+
+#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
+#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
+#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
+#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
+
+/*
+ *	Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
+#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
+#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
+#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
+#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
+#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
+#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
+
+#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
+#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
+#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
+#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
+#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
+#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
+#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
+#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
+#endif
+
+/*
+ *	Mask for all of the SIM devices. Some parts have more or less
+ *	SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
+#endif
+
+
+/****************************************************************************/
+#endif	/* mcfintc_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index b90425fb50f..9c70a67bf85 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -4,7 +4,7 @@
  *	mcfsim.h -- ColdFire System Integration Module support.
  *
  *	(C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
- * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ * 	(C) Copyright 2000, Lineo Inc. (www.lineo.com)
  */
 
 /****************************************************************************/
@@ -12,19 +12,21 @@
 #define	mcfsim_h
 /****************************************************************************/
 
-
 /*
- *	Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
- *	5307 or 5407 specific addresses.
+ * Include the appropriate ColdFire CPU specific System Integration Module
+ * (SIM) definitions.
  */
 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
 #include <asm/m5206sim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M520x)
 #include <asm/m520xsim.h>
 #elif defined(CONFIG_M523x)
 #include <asm/m523xsim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M5249)
 #include <asm/m5249sim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M527x)
 #include <asm/m527xsim.h>
 #elif defined(CONFIG_M5272)
@@ -33,80 +35,13 @@
 #include <asm/m528xsim.h>
 #elif defined(CONFIG_M5307)
 #include <asm/m5307sim.h>
+#include <asm/mcfintc.h>
 #elif defined(CONFIG_M532x)
 #include <asm/m532xsim.h>
 #elif defined(CONFIG_M5407)
 #include <asm/m5407sim.h>
+#include <asm/mcfintc.h>
 #endif
 
-
-/*
- *	Define the base address of the SIM within the MBAR address space.
- */
-#define	MCFSIM_BASE		0x0		/* Base address of SIM */
-
-
-/*
- *	Bit definitions for the ICR family of registers.
- */
-#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
-#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
-#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
-#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
-#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
-#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
-#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
-#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
-#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
-
-#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
-#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
-#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
-#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
-
-/*
- *	Bit definitions for the Interrupt Mask register (IMR).
- */
-#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
-#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
-#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
-#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
-#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
-#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
-#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
-
-#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
-#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
-#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
-#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
-#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
-#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
-#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
-#endif
-
-/*
- *	Mask for all of the SIM devices. Some parts have more or less
- *	SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
-#endif
-
-
-#ifndef __ASSEMBLY__
-/*
- *	Definition for the interrupt auto-vectoring support.
- */
-extern void	mcf_autovector(unsigned int vec);
-#endif /* __ASSEMBLY__ */
-
 /****************************************************************************/
 #endif	/* mcfsim_h */
-- 
cgit v1.2.3


From 5187995f0a9253e915dfee83684eae7b692213e6 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 19 May 2009 14:08:47 +1000
Subject: m68knommu: remove duplicate ColdFire mcf_autovector() code

Each of the ColdFire CPU platform code that used the old style interrupt
controller had its own copy of the mcf_autovector() function. They are all
the same, remove them all and create a single function in the common
coldfire/intc.c code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/5206/config.c   | 17 -----------------
 arch/m68knommu/platform/5206e/config.c  | 17 -----------------
 arch/m68knommu/platform/5249/config.c   | 14 --------------
 arch/m68knommu/platform/5272/config.c   |  7 -------
 arch/m68knommu/platform/5307/config.c   | 14 --------------
 arch/m68knommu/platform/5407/config.c   | 14 --------------
 arch/m68knommu/platform/coldfire/intc.c | 27 +++++++++++++++++++++++++++
 7 files changed, 27 insertions(+), 83 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index f6f79874e9a..481617a23d0 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -68,23 +68,6 @@ static void __init m5206_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-	unsigned char		icr;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		vec -= 25;
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
-		*(mbar + MCFSIM_ICR1 + vec) = icr;
-		vec = 0x1 << (vec + 1);
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
 void mcf_settimericr(unsigned int timer, unsigned int level)
 {
 	volatile unsigned char *icrp;
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index fcf1400db51..29e565a4443 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -69,23 +69,6 @@ static void __init m5206e_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-	unsigned char		icr;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		vec -= 25;
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
-		*(mbar + MCFSIM_ICR1 + vec) = icr;
-		vec = 0x1 << (vec + 1);
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
 void mcf_settimericr(unsigned int timer, unsigned int level)
 {
 	volatile unsigned char *icrp;
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 93d99882592..365fb6c5270 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -66,20 +66,6 @@ static void __init m5249_uarts_init(void)
 }
 
 
-/***************************************************************************/
-
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		vec = 0x1 << (vec - 24);
-		*(mbar + MCFSIM_AVR) |= vec;
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
 /***************************************************************************/
 
 void mcf_settimericr(unsigned int timer, unsigned int level)
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 5f95fcde05f..94a66c12c96 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -148,13 +148,6 @@ void mcf_disableall(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	/* Everything is auto-vectored on the 5272 */
-}
-
-/***************************************************************************/
-
 void mcf_settimericr(int timer, int level)
 {
 	volatile unsigned long *icrp;
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 39da9e9ff67..60fe45d5139 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -83,20 +83,6 @@ static void __init m5307_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		vec = 0x1 << (vec - 24);
-		*(mbar + MCFSIM_AVR) |= vec;
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
 void mcf_settimericr(unsigned int timer, unsigned int level)
 {
 	volatile unsigned char *icrp;
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
index b41d942bf8d..1e8ef74ea15 100644
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -74,20 +74,6 @@ static void __init m5407_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_autovector(unsigned int vec)
-{
-	volatile unsigned char  *mbar;
-
-	if ((vec >= 25) && (vec <= 31)) {
-		mbar = (volatile unsigned char *) MCF_MBAR;
-		vec = 0x1 << (vec - 24);
-		*(mbar + MCFSIM_AVR) |= vec;
-		mcf_setimr(mcf_getimr() & ~vec);
-	}
-}
-
-/***************************************************************************/
-
 void mcf_settimericr(unsigned int timer, unsigned int level)
 {
 	volatile unsigned char *icrp;
diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
index c81ab6e5cf2..f7a61346ee2 100644
--- a/arch/m68knommu/platform/coldfire/intc.c
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -18,6 +18,33 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 
+/*
+ * Define the vector numbers for the basic 7 interrupt sources.
+ * These are often referred to as the "external" interrupts in
+ * the ColdFire documentation (for the early ColdFire cores at least).
+ */
+#define	EIRQ1	25
+#define	EIRQ7	31
+
+/*
+ * Interrupts can be "vectored" on the ColdFire cores that support this old
+ * interrupt controller. That is, the device raising the interrupt can also
+ * supply the vector number to interrupt through. The AVR register of the
+ * interrupt controller enables or disables this for each external interrupt,
+ * so provide generic support for this. Setting this up is out-of-band for
+ * the interrupt system API's, and needs to be done by the driver that
+ * supports this device. Very few devices actually use this.
+ */
+void mcf_autovector(int irq)
+{
+	if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
+		u8 avec;
+		avec = __raw_readb(MCF_MBAR + MCFSIM_AVR);
+		avec |= (0x1 << (irq - EIRQ1 + 1));
+		__raw_writeb(avec, MCF_MBAR + MCFSIM_AVR);
+	}
+}
+
 static void intc_irq_mask(unsigned int irq)
 {
 }
-- 
cgit v1.2.3


From f2154bef817ac3d0ea67b52526fd8e88898b66f9 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 19 May 2009 14:38:08 +1000
Subject: m68knommu: merge old ColdFire interrupt controller masking macros

Currently the code that supports setting the old style ColdFire interrupt
controller mask registers is macros in the include files of each of the
CPU types. Merge all these into a set of real masking functions in the
old Coldfire interrupt controller code proper. All the macros are basically
the same (excepting a register size difference on really early parts).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5206sim.h        | 16 ++------
 arch/m68k/include/asm/m5249sim.h        | 13 ------
 arch/m68k/include/asm/m5307sim.h        | 17 --------
 arch/m68k/include/asm/m5407sim.h        | 13 ------
 arch/m68k/include/asm/mcfintc.h         | 73 +++++++++++----------------------
 arch/m68knommu/platform/5206/config.c   | 11 +++--
 arch/m68knommu/platform/5206e/config.c  | 12 +++---
 arch/m68knommu/platform/5249/config.c   | 11 +++--
 arch/m68knommu/platform/5307/config.c   | 12 +++---
 arch/m68knommu/platform/5407/config.c   | 12 +++---
 arch/m68knommu/platform/coldfire/intc.c | 59 +++++++++++++++++++++++++-
 11 files changed, 109 insertions(+), 140 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 7be8a2d3e65..b50061aaf8f 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -117,21 +117,11 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
 #endif
 
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_MASKALL	0xfffe		/* All SIM intr sources */
-#endif
-
 /*
- *	Macro to get and set IMR register. It is 16 bits on the 5206.
+ * Let the common interrupt handler code know that the ColdFire 5206*
+ * family of CPU's only has a 16bit sized IMR register.
  */
-#define	mcf_getimr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
-
-#define	mcf_getipr()		\
-	*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+#define	MCFSIM_IMR_IS_16BITS
 
 /****************************************************************************/
 #endif	/* m5206sim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 2c23a83512a..36ed31bbf6c 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -106,19 +106,6 @@
 #define MCFGPIO_PIN_MAX		64
 #define MCFGPIO_IRQ_MAX		-1
 #define MCFGPIO_IRQ_VECBASE	-1
-/*
- *	Macro to set IMR register. It is 32 bits on the 5249.
- */
-#define	MCFSIM_IMR_MASKALL	0x7fffe		/* All SIM intr sources */
-
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
 
 /****************************************************************************/
 
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 6a1870c925a..60946225699 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -124,23 +124,6 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
-#if defined(CONFIG_M5307)
-#define	MCFSIM_IMR_MASKALL	0x3fffe		/* All SIM intr sources */
-#endif
-
-/*
- *	Macro to set IMR register. It is 32 bits on the 5307.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
  */
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index 25194756b43..3c4bd5f08cd 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -96,19 +96,6 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
-/*
- *	Macro to set IMR register. It is 32 bits on the 5407.
- */
-#define	mcf_getimr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
-
-#define	mcf_setimr(imr)		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
-
-#define	mcf_getipr()		\
-	*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
-
-
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
  */
diff --git a/arch/m68k/include/asm/mcfintc.h b/arch/m68k/include/asm/mcfintc.h
index a75a001e773..213aa6c68ab 100644
--- a/arch/m68k/include/asm/mcfintc.h
+++ b/arch/m68k/include/asm/mcfintc.h
@@ -48,59 +48,32 @@
 #define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
 
 /*
- *	Bit definitions for the ICR family of registers.
+ * IMR bit position definitions.
  */
-#define	MCFSIM_ICR_AUTOVEC	0x80		/* Auto-vectored intr */
-#define	MCFSIM_ICR_LEVEL0	0x00		/* Level 0 intr */
-#define	MCFSIM_ICR_LEVEL1	0x04		/* Level 1 intr */
-#define	MCFSIM_ICR_LEVEL2	0x08		/* Level 2 intr */
-#define	MCFSIM_ICR_LEVEL3	0x0c		/* Level 3 intr */
-#define	MCFSIM_ICR_LEVEL4	0x10		/* Level 4 intr */
-#define	MCFSIM_ICR_LEVEL5	0x14		/* Level 5 intr */
-#define	MCFSIM_ICR_LEVEL6	0x18		/* Level 6 intr */
-#define	MCFSIM_ICR_LEVEL7	0x1c		/* Level 7 intr */
+#define	MCFINTC_EINT1		1		/* External int #1 */
+#define	MCFINTC_EINT2		2		/* External int #2 */
+#define	MCFINTC_EINT3		3		/* External int #3 */
+#define	MCFINTC_EINT4		4		/* External int #4 */
+#define	MCFINTC_EINT5		5		/* External int #5 */
+#define	MCFINTC_EINT6		6		/* External int #6 */
+#define	MCFINTC_EINT7		7		/* External int #7 */
+#define	MCFINTC_SWT		8		/* Software Watchdog */
+#define	MCFINTC_TIMER1		9
+#define	MCFINTC_TIMER2		10
+#define	MCFINTC_I2C		11		/* I2C / MBUS */
+#define	MCFINTC_UART0		12
+#define	MCFINTC_UART1		13
+#define	MCFINTC_DMA0		14
+#define	MCFINTC_DMA1		15
+#define	MCFINTC_DMA2		16
+#define	MCFINTC_DMA3		17
+#define	MCFINTC_QSPI		18
 
-#define	MCFSIM_ICR_PRI0		0x00		/* Priority 0 intr */
-#define	MCFSIM_ICR_PRI1		0x01		/* Priority 1 intr */
-#define	MCFSIM_ICR_PRI2		0x02		/* Priority 2 intr */
-#define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
-
-/*
- *	Bit definitions for the Interrupt Mask register (IMR).
- */
-#define	MCFSIM_IMR_EINT1	0x0002		/* External intr # 1 */
-#define	MCFSIM_IMR_EINT2	0x0004		/* External intr # 2 */
-#define	MCFSIM_IMR_EINT3	0x0008		/* External intr # 3 */
-#define	MCFSIM_IMR_EINT4	0x0010		/* External intr # 4 */
-#define	MCFSIM_IMR_EINT5	0x0020		/* External intr # 5 */
-#define	MCFSIM_IMR_EINT6	0x0040		/* External intr # 6 */
-#define	MCFSIM_IMR_EINT7	0x0080		/* External intr # 7 */
-
-#define	MCFSIM_IMR_SWD		0x0100		/* Software Watchdog intr */
-#define	MCFSIM_IMR_TIMER1	0x0200		/* TIMER 1 intr */
-#define	MCFSIM_IMR_TIMER2	0x0400		/* TIMER 2 intr */
-#define MCFSIM_IMR_MBUS		0x0800		/* MBUS intr	*/
-#define	MCFSIM_IMR_UART1	0x1000		/* UART 1 intr */
-#define	MCFSIM_IMR_UART2	0x2000		/* UART 2 intr */
-
-#if defined(CONFIG_M5206e)
-#define	MCFSIM_IMR_DMA1		0x4000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x8000		/* DMA 2 intr */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
-#define	MCFSIM_IMR_DMA0		0x4000		/* DMA 0 intr */
-#define	MCFSIM_IMR_DMA1		0x8000		/* DMA 1 intr */
-#define	MCFSIM_IMR_DMA2		0x10000		/* DMA 2 intr */
-#define	MCFSIM_IMR_DMA3		0x20000		/* DMA 3 intr */
+#ifndef __ASSEMBLER__
+void mcf_autovector(int irq);
+void mcf_setimr(int index);
+void mcf_clrimr(int index);
 #endif
 
-/*
- *	Mask for all of the SIM devices. Some parts have more or less
- *	SIM devices. This is a catchall for the sandard set.
- */
-#ifndef MCFSIM_IMR_MASKALL
-#define	MCFSIM_IMR_MASKALL	0x3ffe		/* All intr sources */
-#endif
-
-
 /****************************************************************************/
 #endif	/* mcfintc_h */
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index 481617a23d0..0dce2383320 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -49,11 +49,11 @@ static void __init m5206_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_clrimr(MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_clrimr(MCFINTC_UART1);
 	}
 }
 
@@ -75,13 +75,13 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 	if (timer <= 2) {
 		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
+		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
+		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
 		}
 
 		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
 		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
+		mcf_clrimr(imr);
 	}
 }
 
@@ -100,7 +100,6 @@ void m5206_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
 	mach_reset = m5206_cpu_reset;
 }
 
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 29e565a4443..08ef7e26898 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -50,11 +50,11 @@ static void __init m5206e_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_clrimr(MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_clrimr(MCFINTC_UART1);
 	}
 }
 
@@ -76,13 +76,13 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 	if (timer <= 2) {
 		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
+		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
+		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
 		}
 
 		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
 		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
+		mcf_clrimr(imr);
 	}
 }
 
@@ -101,8 +101,6 @@ void m5206e_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if defined(CONFIG_NETtel)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 365fb6c5270..7261a3d28ad 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -48,11 +48,11 @@ static void __init m5249_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_clrimr(MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_clrimr(MCFINTC_UART1);
 	}
 }
 
@@ -75,13 +75,13 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 	if (timer <= 2) {
 		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
+		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
+		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
 		}
 
 		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
 		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
+		mcf_clrimr(imr);
 	}
 }
 
@@ -100,7 +100,6 @@ void m5249_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
 	mach_reset = m5249_cpu_reset;
 }
 
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 60fe45d5139..3e27d2ec03f 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -64,11 +64,11 @@ static void __init m5307_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_clrimr(MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_clrimr(MCFINTC_UART1);
 	}
 }
 
@@ -90,13 +90,13 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 	if (timer <= 2) {
 		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
+		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
+		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
 		}
 
 		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
 		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
+		mcf_clrimr(imr);
 	}
 }
 
@@ -115,8 +115,6 @@ void m5307_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if defined(CONFIG_NETtel) || \
     defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
 	/* Copy command line from FLASH to local buffer... */
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
index 1e8ef74ea15..8aa94837bbc 100644
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -55,11 +55,11 @@ static void __init m5407_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+		mcf_clrimr(MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+		mcf_clrimr(MCFINTC_UART1);
 	}
 }
 
@@ -81,13 +81,13 @@ void mcf_settimericr(unsigned int timer, unsigned int level)
 
 	if (timer <= 2) {
 		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
+		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
+		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
 		}
 
 		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
 		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_setimr(mcf_getimr() & ~imr);
+		mcf_clrimr(imr);
 	}
 }
 
@@ -106,8 +106,6 @@ void m5407_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-	mcf_setimr(MCFSIM_IMR_MASKALL);
-
 #if defined(CONFIG_CLEOPATRA)
 	/* Different timer setup - to prevent device clash */
 	mcf_timervector = 30;
diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
index f7a61346ee2..88bffac50c6 100644
--- a/arch/m68knommu/platform/coldfire/intc.c
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -1,5 +1,5 @@
 /*
- * intc.c
+ * intc.c  -- support for the old ColdFire interrupt controller
  *
  * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
  *
@@ -26,6 +26,62 @@
 #define	EIRQ1	25
 #define	EIRQ7	31
 
+/*
+ * In the early version 2 core ColdFire parts the IMR register was 16 bits
+ * in size. Version 3 (and later version 2) core parts have a 32 bit
+ * sized IMR register. Provide some size independant methods to access the
+ * IMR register.
+ */
+#ifdef MCFSIM_IMR_IS_16BITS
+
+void mcf_setimr(int index)
+{
+        u16 imr;
+        imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	__raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+        u16 imr;
+        imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	__raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u16 imr;
+        imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	imr |= mask;
+	__raw_writew(imr, MCF_MBAR + MCFSIM_IMR);
+}
+
+#else
+
+void mcf_setimr(int index)
+{
+        u32 imr;
+        imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	__raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_clrimr(int index)
+{
+        u32 imr;
+        imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	__raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
+}
+
+void mcf_maskimr(unsigned int mask)
+{
+	u32 imr;
+        imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	imr |= mask;
+	__raw_writel(imr, MCF_MBAR + MCFSIM_IMR);
+}
+
+#endif
+
 /*
  * Interrupts can be "vectored" on the ColdFire cores that support this old
  * interrupt controller. That is, the device raising the interrupt can also
@@ -70,6 +126,7 @@ void __init init_IRQ(void)
 	int irq;
 
 	init_vectors();
+	mcf_maskimr(0xffffffff);
 
 	for (irq = 0; (irq < NR_IRQS); irq++) {
 		irq_desc[irq].status = IRQ_DISABLED;
-- 
cgit v1.2.3


From f9311f26434cea3e926f56ca2aa3e5740e962c72 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 19 May 2009 14:39:19 +1000
Subject: m68knommu: support code to mask external interrupts on old ColdFire
 CPU's

The external interrupts used on the old Coldfire parts with the old style
interrupt controller can be properly mask/unmasked in the interrupt
handling code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/coldfire/intc.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
index 88bffac50c6..14db26bf6e2 100644
--- a/arch/m68knommu/platform/coldfire/intc.c
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -103,10 +103,14 @@ void mcf_autovector(int irq)
 
 static void intc_irq_mask(unsigned int irq)
 {
+	if ((irq >= EIRQ1) && (irq <= EIRQ7))
+		mcf_setimr(irq - EIRQ1 + 1);
 }
 
 static void intc_irq_unmask(unsigned int irq)
 {
+	if ((irq >= EIRQ1) && (irq <= EIRQ7))
+		mcf_clrimr(irq - EIRQ1 + 1);
 }
 
 static int intc_irq_set_type(unsigned int irq, unsigned int type)
-- 
cgit v1.2.3


From 04b75b10dceadf937e3707ecc3dfccf6a076fd29 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 19 May 2009 14:52:40 +1000
Subject: m68knommu: simplify ColdFire "timers" clock initialization

The ColdFire "timers" clock setup can be simplified. There is really no
need for the flexible per-platform setup code. The clock interrupt can be
hard defined per CPU platform (in CPU include files). This makes the
actual timer code simpler.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5206sim.h          | 13 ++++++-----
 arch/m68k/include/asm/m5249sim.h          |  6 +++++
 arch/m68k/include/asm/m5272sim.h          |  5 ++++
 arch/m68k/include/asm/m5307sim.h          |  6 +++++
 arch/m68k/include/asm/m5407sim.h          |  5 ++++
 arch/m68knommu/platform/5206/config.c     | 25 +++++++++-----------
 arch/m68knommu/platform/5206e/config.c    | 25 +++++++++-----------
 arch/m68knommu/platform/5249/config.c     | 26 +++++++++------------
 arch/m68knommu/platform/5272/config.c     | 22 +++++++----------
 arch/m68knommu/platform/5307/config.c     | 35 +++++++++------------------
 arch/m68knommu/platform/5407/config.c     | 39 ++++++++++---------------------
 arch/m68knommu/platform/coldfire/timers.c | 17 ++++----------
 12 files changed, 97 insertions(+), 127 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index b50061aaf8f..9c384e294af 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -88,12 +88,19 @@
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x1c5)	/* Parallel Direction (r/w) */
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x1c9)	/* Parallel Port Value (r/w) */
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+
 /*
  * Generic GPIO
  */
 #define MCFGPIO_PIN_MAX		8
 #define MCFGPIO_IRQ_VECBASE	-1
 #define MCFGPIO_IRQ_MAX		-1
+
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
  */
@@ -117,11 +124,5 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR15	/* DMA 2 ICR */
 #endif
 
-/*
- * Let the common interrupt handler code know that the ColdFire 5206*
- * family of CPU's only has a 16bit sized IMR register.
- */
-#define	MCFSIM_IMR_IS_16BITS
-
 /****************************************************************************/
 #endif	/* m5206sim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 36ed31bbf6c..8d76a193071 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -70,6 +70,12 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+
 /*
  *	General purpose IO registers (in MBAR2).
  */
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 0665ba1a5d3..469686ffc4a 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -73,6 +73,11 @@
 #define	MCFSIM_PCDAT		(MCF_MBAR + 0x96) /* Port C Data (r/w) */
 #define	MCFSIM_PDCNT		(MCF_MBAR + 0x98) /* Port D Control (r/w) */
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		69		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	70		/* Timer1, Level 7 */
 
 /*
  * Generic GPIO support
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 60946225699..c6830e5b54c 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -124,6 +124,7 @@
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
 
+
 /*
  *	Some symbol defines for the Parallel Port Pin Assignment Register
  */
@@ -139,6 +140,11 @@
 #define IRQ3_LEVEL6	0x40
 #define IRQ1_LEVEL2	0x20
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
 /*
  *	Define the Cache register flags.
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index 3c4bd5f08cd..c399abbf953 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -111,6 +111,11 @@
 #define IRQ3_LEVEL6	0x40
 #define IRQ1_LEVEL2	0x20
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
 /*
  *	Define the Cache register flags.
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index 0dce2383320..c1d24796ef2 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -68,21 +68,17 @@ static void __init m5206_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5206_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_clrimr(imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+#endif
 }
 
 /***************************************************************************/
@@ -101,6 +97,7 @@ void m5206_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5206_cpu_reset;
+	m5206_timers_init();
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 08ef7e26898..363296af2ee 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -69,21 +69,17 @@ static void __init m5206e_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5206e_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_clrimr(imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+#endif
 }
 
 /***************************************************************************/
@@ -108,6 +104,7 @@ void __init config_BSP(char *commandp, int size)
 #endif /* CONFIG_NETtel */
 
 	mach_reset = m5206e_cpu_reset;
+	m5206e_timers_init();
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 7261a3d28ad..51202b1096c 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -65,24 +65,19 @@ static void __init m5249_uarts_init(void)
 		m5249_uart_init_line(line, m5249_uart_platform[line].irq);
 }
 
-
 /***************************************************************************/
 
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5249_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_clrimr(imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+#endif
 }
 
 /***************************************************************************/
@@ -101,6 +96,7 @@ void m5249_cpu_reset(void)
 void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5249_cpu_reset;
+	m5249_timers_init();
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index 94a66c12c96..b16add9aa4e 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -20,12 +20,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 /*
  *	Some platforms need software versions of the GPIO data registers.
  */
@@ -148,14 +142,15 @@ void mcf_disableall(void)
 
 /***************************************************************************/
 
-void mcf_settimericr(int timer, int level)
+static void __init m5272_timers_init(void)
 {
-	volatile unsigned long *icrp;
+	/* Timer1 @ level6 is always used as system timer */
+	writel((0x8 | 0x6) << ((4 - 1) * 4), MCF_MBAR + MCFSIM_ICR1);
 
-	if ((timer >= 1 ) && (timer <= 4)) {
-		icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-		*icrp = (0x8 | level) << ((4 - timer) * 4);
-	}
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 @ level7 is to be used as a high speed profile timer  */
+	writel((0x8 | 0x7) << ((4 - 2) * 4), MCF_MBAR + MCFSIM_ICR1);
+#endif
 }
 
 /***************************************************************************/
@@ -195,9 +190,8 @@ void __init config_BSP(char *commandp, int size)
 	commandp[size-1] = 0;
 #endif
 
-	mcf_timervector = 69;
-	mcf_profilevector = 70;
 	mach_reset = m5272_cpu_reset;
+	m5272_timers_init();
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index 3e27d2ec03f..b711597ac8e 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -21,12 +21,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 /*
  *	Some platforms need software versions of the GPIO data registers.
  */
@@ -83,21 +77,17 @@ static void __init m5307_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5307_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_clrimr(imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+#endif
 }
 
 /***************************************************************************/
@@ -120,13 +110,10 @@ void __init config_BSP(char *commandp, int size)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
 	commandp[size-1] = 0;
-	/* Different timer setup - to prevent device clash */
-	mcf_timervector = 30;
-	mcf_profilevector = 31;
-	mcf_timerlevel = 6;
 #endif
 
 	mach_reset = m5307_cpu_reset;
+	m5307_timers_init();
 
 #ifdef CONFIG_BDM_DISABLE
 	/*
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
index 8aa94837bbc..cc80029a4a0 100644
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -20,12 +20,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m5407_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
@@ -59,6 +53,7 @@ static void __init m5407_uart_init_line(int line, int irq)
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
+		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
 		mcf_clrimr(MCFINTC_UART1);
 	}
 }
@@ -74,21 +69,17 @@ static void __init m5407_uarts_init(void)
 
 /***************************************************************************/
 
-void mcf_settimericr(unsigned int timer, unsigned int level)
+static void __init m5407_timers_init(void)
 {
-	volatile unsigned char *icrp;
-	unsigned int icr, imr;
-
-	if (timer <= 2) {
-		switch (timer) {
-		case 2:  icr = MCFSIM_TIMER2ICR; imr = MCFINTC_TIMER2; break;
-		default: icr = MCFSIM_TIMER1ICR; imr = MCFINTC_TIMER1; break;
-		}
-
-		icrp = (volatile unsigned char *) (MCF_MBAR + icr);
-		*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
-		mcf_clrimr(imr);
-	}
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+#endif
 }
 
 /***************************************************************************/
@@ -106,14 +97,8 @@ void m5407_cpu_reset(void)
 
 void __init config_BSP(char *commandp, int size)
 {
-#if defined(CONFIG_CLEOPATRA)
-	/* Different timer setup - to prevent device clash */
-	mcf_timervector = 30;
-	mcf_profilevector = 31;
-	mcf_timerlevel = 6;
-#endif
-
 	mach_reset = m5407_cpu_reset;
+	m5407_timers_init();
 }
 
 /***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index 1ba8a373165..77b0c17ce6b 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -30,15 +30,6 @@
 #define	FREQ	(MCF_BUSCLK / 16)
 #define	TA(a)	(MCF_MBAR + MCFTIMER_BASE1 + (a))
 
-/*
- *	Default the timer and vector to use for ColdFire. Some ColdFire
- *	CPU's and some boards may want different. Their sub-architecture
- *	startup code (in config.c) can change these if they want.
- */
-unsigned int	mcf_timervector = 29;
-unsigned int	mcf_profilevector = 31;
-unsigned int	mcf_timerlevel = 5;
-
 /*
  *	These provide the underlying interrupt vector support.
  *	Unfortunately it is a little different on each ColdFire.
@@ -107,7 +98,7 @@ static struct clocksource mcftmr_clk = {
 
 void hw_timer_init(void)
 {
-	setup_irq(mcf_timervector, &mcftmr_timer_irq);
+	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
 
 	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
 	mcftmr_cycles_per_jiffy = FREQ / HZ;
@@ -124,7 +115,7 @@ void hw_timer_init(void)
 	mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
 	clocksource_register(&mcftmr_clk);
 
-	mcf_settimericr(1, mcf_timerlevel);
+	mcf_clrimr(MCFINTC_TIMER1);
 
 #ifdef CONFIG_HIGHPROFILE
 	coldfire_profile_init();
@@ -171,7 +162,7 @@ void coldfire_profile_init(void)
 	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
 	       PROFILEHZ);
 
-	setup_irq(mcf_profilevector, &coldfire_profile_irq);
+	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
 
 	/* Set up TIMER 2 as high speed profile clock */
 	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
@@ -180,7 +171,7 @@ void coldfire_profile_init(void)
 	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
 
-	mcf_settimericr(2, 7);
+	mcf_clrimr(MCFINTC_TIMER2);
 }
 
 /***************************************************************************/
-- 
cgit v1.2.3


From f6a66276f5fdc018d2a9378c71de3bae13c588d7 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 19 May 2009 15:00:01 +1000
Subject: m68knommu: clean up ColdFire 532x CPU timer setup

The newer ColdFire 532x family of CPU's uses the old timer, but has a
newer interrupt controller. It doesn't need the special timer setup
that was required when using the older interrupt controller. Remove the
dead timer irq and level setting code, and define the hard coded vector.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m532xsim.h      |  5 +++++
 arch/m68knommu/platform/532x/config.c | 17 +----------------
 2 files changed, 6 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 021a0e15527..36bf15aec9a 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -66,6 +66,11 @@
 #define MCFSIM_ICR_TIMER1	(0xFC048040+32)
 #define MCFSIM_ICR_TIMER2	(0xFC048040+33)
 
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define	MCF_IRQ_TIMER		(64 + 32)	/* Timer0 */
+#define	MCF_IRQ_PROFILER	(64 + 33)	/* Timer1 */
 
 /*
  *	Define the Cache register flags.
diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c
index 66e212b58b8..d632948e64e 100644
--- a/arch/m68knommu/platform/532x/config.c
+++ b/arch/m68knommu/platform/532x/config.c
@@ -30,12 +30,6 @@
 
 /***************************************************************************/
 
-extern unsigned int mcf_timervector;
-extern unsigned int mcf_profilevector;
-extern unsigned int mcf_timerlevel;
-
-/***************************************************************************/
-
 static struct mcf_platform_uart m532x_uart_platform[] = {
 	{
 		.mapbase	= MCFUART_BASE1,
@@ -87,6 +81,7 @@ static struct platform_device m532x_fec = {
 	.num_resources		= ARRAY_SIZE(m532x_fec_resources),
 	.resource		= m532x_fec_resources,
 };
+
 static struct platform_device *m532x_devices[] __initdata = {
 	&m532x_uart,
 	&m532x_fec,
@@ -126,12 +121,6 @@ static void __init m532x_fec_init(void)
 
 /***************************************************************************/
 
-void mcf_settimericr(unsigned int timer, unsigned int level)
-{
-}
-
-/***************************************************************************/
-
 static void m532x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -153,10 +142,6 @@ void __init config_BSP(char *commandp, int size)
 	}
 #endif
 
-	mcf_timervector = 64+32;
-	mcf_profilevector = 64+33;
-	mach_reset = m532x_cpu_reset;
-
 #ifdef CONFIG_BDM_DISABLE
 	/*
 	 * Disable the BDM clocking.  This also turns off most of the rest of
-- 
cgit v1.2.3


From 39f0fb6a3448cfc316e0d5295ed1b121db50037e Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 22 May 2009 13:33:35 +1000
Subject: m68knommu: map ColdFire interrupts to correct masking bits

The older simple ColdFire interrupt controller has no one-to-one mapping
of interrupt numbers to bits in the interrupt mask register. Create a
mapping array that each ColdFire CPU type can populate with its available
interrupts and the bits that each use in the interrupt mask register.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/mcfintc.h         | 22 ++++++++++++-----
 arch/m68knommu/platform/5206/config.c   | 13 +++++++---
 arch/m68knommu/platform/5206e/config.c  | 13 +++++++---
 arch/m68knommu/platform/5249/config.c   |  8 +++---
 arch/m68knommu/platform/5307/config.c   | 14 ++++++++---
 arch/m68knommu/platform/5407/config.c   | 15 ++++++++---
 arch/m68knommu/platform/coldfire/intc.c | 44 ++++++++++++++++++++-------------
 7 files changed, 90 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/mcfintc.h b/arch/m68k/include/asm/mcfintc.h
index 213aa6c68ab..4183320a381 100644
--- a/arch/m68k/include/asm/mcfintc.h
+++ b/arch/m68k/include/asm/mcfintc.h
@@ -24,11 +24,6 @@
  * interrupt control purposes.
  */
 
-/*
- * Define the base address of the SIM within the MBAR address space.
- */
-#define	MCFSIM_BASE		0x0		/* Base address within SIM */
-
 /*
  * Bit definitions for the ICR family of registers.
  */
@@ -48,7 +43,9 @@
 #define	MCFSIM_ICR_PRI3		0x03		/* Priority 3 intr */
 
 /*
- * IMR bit position definitions.
+ * IMR bit position definitions. Not all ColdFire parts with this interrupt
+ * controller actually support all of these interrupt sources. But the bit
+ * numbers are the same in all cores.
  */
 #define	MCFINTC_EINT1		1		/* External int #1 */
 #define	MCFINTC_EINT2		2		/* External int #2 */
@@ -70,6 +67,19 @@
 #define	MCFINTC_QSPI		18
 
 #ifndef __ASSEMBLER__
+
+/*
+ * There is no one-is-one correspondance between the interrupt number (irq)
+ * and the bit fields on the mask register. So we create a per-cpu type
+ * mapping of irq to mask bit. The CPU platform code needs to register
+ * its supported irq's at init time, using this function.
+ */
+extern unsigned char mcf_irq2imr[];
+static inline void mcf_mapirq2imr(int irq, int imr)
+{
+	mcf_irq2imr[irq] = imr;
+}
+
 void mcf_autovector(int irq);
 void mcf_setimr(int index);
 void mcf_clrimr(int index);
diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c
index c1d24796ef2..9c335465e66 100644
--- a/arch/m68knommu/platform/5206/config.c
+++ b/arch/m68knommu/platform/5206/config.c
@@ -49,11 +49,11 @@ static void __init m5206_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART0);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -73,11 +73,13 @@ static void __init m5206_timers_init(void)
 	/* Timer1 is always used as system timer */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
 
 #ifdef CONFIG_HIGHPROFILE
 	/* Timer2 is to be used as a high speed profile timer  */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
 #endif
 }
 
@@ -98,13 +100,18 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5206_cpu_reset;
 	m5206_timers_init();
+	m5206_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5206_uarts_init();
 	platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index 363296af2ee..0f41ba82a3b 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -50,11 +50,11 @@ static void __init m5206e_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART0);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -74,11 +74,13 @@ static void __init m5206e_timers_init(void)
 	/* Timer1 is always used as system timer */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
 
 #ifdef CONFIG_HIGHPROFILE
 	/* Timer2 is to be used as a high speed profile timer  */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
 #endif
 }
 
@@ -105,13 +107,18 @@ void __init config_BSP(char *commandp, int size)
 
 	mach_reset = m5206e_cpu_reset;
 	m5206e_timers_init();
+	m5206e_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5206e_uarts_init();
 	platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c
index 51202b1096c..646f5ba462f 100644
--- a/arch/m68knommu/platform/5249/config.c
+++ b/arch/m68knommu/platform/5249/config.c
@@ -48,11 +48,11 @@ static void __init m5249_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART0);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -72,11 +72,13 @@ static void __init m5249_timers_init(void)
 	/* Timer1 is always used as system timer */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
 
 #ifdef CONFIG_HIGHPROFILE
 	/* Timer2 is to be used as a high speed profile timer  */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
 #endif
 }
 
@@ -97,13 +99,13 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5249_cpu_reset;
 	m5249_timers_init();
+	m5249_uarts_init();
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5249_uarts_init();
 	platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c
index b711597ac8e..00900ac06a9 100644
--- a/arch/m68knommu/platform/5307/config.c
+++ b/arch/m68knommu/platform/5307/config.c
@@ -58,11 +58,11 @@ static void __init m5307_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART0);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -82,11 +82,13 @@ static void __init m5307_timers_init(void)
 	/* Timer1 is always used as system timer */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
 
 #ifdef CONFIG_HIGHPROFILE
 	/* Timer2 is to be used as a high speed profile timer  */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
 #endif
 }
 
@@ -114,6 +116,13 @@ void __init config_BSP(char *commandp, int size)
 
 	mach_reset = m5307_cpu_reset;
 	m5307_timers_init();
+	m5307_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 
 #ifdef CONFIG_BDM_DISABLE
 	/*
@@ -129,7 +138,6 @@ void __init config_BSP(char *commandp, int size)
 
 static int __init init_BSP(void)
 {
-	m5307_uarts_init();
 	platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c
index cc80029a4a0..70ea789a400 100644
--- a/arch/m68knommu/platform/5407/config.c
+++ b/arch/m68knommu/platform/5407/config.c
@@ -49,12 +49,11 @@ static void __init m5407_uart_init_line(int line, int irq)
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
-		mcf_clrimr(MCFINTC_UART0);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
 		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
-		mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
-		mcf_clrimr(MCFINTC_UART1);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }
 
@@ -74,11 +73,13 @@ static void __init m5407_timers_init(void)
 	/* Timer1 is always used as system timer */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
 
 #ifdef CONFIG_HIGHPROFILE
 	/* Timer2 is to be used as a high speed profile timer  */
 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
 		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
 #endif
 }
 
@@ -99,13 +100,19 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5407_cpu_reset;
 	m5407_timers_init();
+	m5407_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(27, MCFINTC_EINT3);
+	mcf_mapirq2imr(29, MCFINTC_EINT5);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m5407_uarts_init();
 	platform_add_devices(m5407_devices, ARRAY_SIZE(m5407_devices));
 	return 0;
 }
diff --git a/arch/m68knommu/platform/coldfire/intc.c b/arch/m68knommu/platform/coldfire/intc.c
index 14db26bf6e2..a4560c86db7 100644
--- a/arch/m68knommu/platform/coldfire/intc.c
+++ b/arch/m68knommu/platform/coldfire/intc.c
@@ -19,9 +19,17 @@
 #include <asm/mcfsim.h>
 
 /*
- * Define the vector numbers for the basic 7 interrupt sources.
- * These are often referred to as the "external" interrupts in
- * the ColdFire documentation (for the early ColdFire cores at least).
+ * The mapping of irq number to a mask register bit is not one-to-one.
+ * The irq numbers are either based on "level" of interrupt or fixed
+ * for an autovector-able interrupt. So we keep a local data structure
+ * that maps from irq to mask register. Not all interrupts will have
+ * an IMR bit.
+ */
+unsigned char mcf_irq2imr[NR_IRQS];
+
+/*
+ * Define the miniumun and maximum external interrupt numbers.
+ * This is also used as the "level" interrupt numbers.
  */
 #define	EIRQ1	25
 #define	EIRQ7	31
@@ -36,22 +44,22 @@
 
 void mcf_setimr(int index)
 {
-        u16 imr;
-        imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
 	__raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
 }
 
 void mcf_clrimr(int index)
 {
-        u16 imr;
-        imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	u16 imr;
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
 	__raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
 }
 
 void mcf_maskimr(unsigned int mask)
 {
 	u16 imr;
-        imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readw(MCF_MBAR + MCFSIM_IMR);
 	imr |= mask;
 	__raw_writew(imr, MCF_MBAR + MCFSIM_IMR);
 }
@@ -60,22 +68,22 @@ void mcf_maskimr(unsigned int mask)
 
 void mcf_setimr(int index)
 {
-        u32 imr;
-        imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
 	__raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR);
 }
 
 void mcf_clrimr(int index)
 {
-        u32 imr;
-        imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	u32 imr;
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
 	__raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR);
 }
 
 void mcf_maskimr(unsigned int mask)
 {
 	u32 imr;
-        imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
+	imr = __raw_readl(MCF_MBAR + MCFSIM_IMR);
 	imr |= mask;
 	__raw_writel(imr, MCF_MBAR + MCFSIM_IMR);
 }
@@ -93,24 +101,26 @@ void mcf_maskimr(unsigned int mask)
  */
 void mcf_autovector(int irq)
 {
+#ifdef MCFSIM_AVR
 	if ((irq >= EIRQ1) && (irq <= EIRQ7)) {
 		u8 avec;
 		avec = __raw_readb(MCF_MBAR + MCFSIM_AVR);
 		avec |= (0x1 << (irq - EIRQ1 + 1));
 		__raw_writeb(avec, MCF_MBAR + MCFSIM_AVR);
 	}
+#endif
 }
 
 static void intc_irq_mask(unsigned int irq)
 {
-	if ((irq >= EIRQ1) && (irq <= EIRQ7))
-		mcf_setimr(irq - EIRQ1 + 1);
+	if (mcf_irq2imr[irq])
+		mcf_setimr(mcf_irq2imr[irq]);
 }
 
 static void intc_irq_unmask(unsigned int irq)
 {
-	if ((irq >= EIRQ1) && (irq <= EIRQ7))
-		mcf_clrimr(irq - EIRQ1 + 1);
+	if (mcf_irq2imr[irq])
+		mcf_clrimr(mcf_irq2imr[irq]);
 }
 
 static int intc_irq_set_type(unsigned int irq, unsigned int type)
-- 
cgit v1.2.3


From 3945ca0f84fee3fe564189fe8cf8f02491d19622 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 22 May 2009 13:50:53 +1000
Subject: m68knommu: clean up old ColdFire timer irq setup

The recent changes to the old ColdFire interrupt controller code means
we no longer need to manually unmask the timer interrupt. That is now
done in the interrupt controller code proper.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/coldfire/timers.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index 77b0c17ce6b..2304d736c70 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -34,7 +34,6 @@
  *	These provide the underlying interrupt vector support.
  *	Unfortunately it is a little different on each ColdFire.
  */
-extern void mcf_settimericr(int timer, int level);
 void coldfire_profile_init(void);
 
 #if defined(CONFIG_M532x)
@@ -98,8 +97,6 @@ static struct clocksource mcftmr_clk = {
 
 void hw_timer_init(void)
 {
-	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
-
 	__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
 	mcftmr_cycles_per_jiffy = FREQ / HZ;
 	/*
@@ -115,7 +112,7 @@ void hw_timer_init(void)
 	mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
 	clocksource_register(&mcftmr_clk);
 
-	mcf_clrimr(MCFINTC_TIMER1);
+	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
 
 #ifdef CONFIG_HIGHPROFILE
 	coldfire_profile_init();
@@ -162,8 +159,6 @@ void coldfire_profile_init(void)
 	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
 	       PROFILEHZ);
 
-	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
-
 	/* Set up TIMER 2 as high speed profile clock */
 	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
 
@@ -171,7 +166,7 @@ void coldfire_profile_init(void)
 	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
 
-	mcf_clrimr(MCFINTC_TIMER2);
+	setup_irq(MCF_IRQ_PROFILER, &coldfire_profile_irq);
 }
 
 /***************************************************************************/
-- 
cgit v1.2.3


From da3601a5fa664c8d51383fe916d96bd4fbce84b8 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Fri, 22 May 2009 14:16:39 +1000
Subject: m68knommu: add support for second interrupt controller of ColdFire
 5249

The ColdFire 5249 CPU has a second (compleletly different) interrupt
controller. It is the only ColdFire CPU that has this type. It controlls
GPIO interrupts amongst a number of interrupts from other internal
peripherals. Add support code for it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5249sim.h      | 20 ++++++++++--
 arch/m68knommu/platform/5249/Makefile |  2 +-
 arch/m68knommu/platform/5249/intc2.c  | 59 +++++++++++++++++++++++++++++++++++
 3 files changed, 78 insertions(+), 3 deletions(-)
 create mode 100644 arch/m68knommu/platform/5249/intc2.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 8d76a193071..14bce877ed8 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -106,6 +106,22 @@
 #define	MCFSIM2_IDECONFIG1	0x18c		/* IDEconfig1 */
 #define	MCFSIM2_IDECONFIG2	0x190		/* IDEconfig2 */
 
+/*
+ * Define the base interrupt for the second interrupt controller.
+ * We set it to 128, out of the way of the base interrupts, and plenty
+ * of room for its 64 interrupts.
+ */
+#define	MCFINTC2_VECBASE	128
+
+#define	MCFINTC2_GPIOIRQ0	(MCFINTC2_VECBASE + 32)
+#define	MCFINTC2_GPIOIRQ1	(MCFINTC2_VECBASE + 33)
+#define	MCFINTC2_GPIOIRQ2	(MCFINTC2_VECBASE + 34)
+#define	MCFINTC2_GPIOIRQ3	(MCFINTC2_VECBASE + 35)
+#define	MCFINTC2_GPIOIRQ4	(MCFINTC2_VECBASE + 36)
+#define	MCFINTC2_GPIOIRQ5	(MCFINTC2_VECBASE + 37)
+#define	MCFINTC2_GPIOIRQ6	(MCFINTC2_VECBASE + 38)
+#define	MCFINTC2_GPIOIRQ7	(MCFINTC2_VECBASE + 39)
+
 /*
  * Generic GPIO support
  */
@@ -135,9 +151,9 @@
 	subql	#1,%a1				/* get MBAR2 address in a1 */
 
 	/*
-	 *      Move secondary interrupts to base at 128.
+	 *      Move secondary interrupts to their base (128).
 	 */
-	moveb	#0x80,%d0
+	moveb	#MCFINTC2_VECBASE,%d0
 	moveb	%d0,0x16b(%a1)			/* interrupt base register */
 
 	/*
diff --git a/arch/m68knommu/platform/5249/Makefile b/arch/m68knommu/platform/5249/Makefile
index 113c3339006..f56225d1582 100644
--- a/arch/m68knommu/platform/5249/Makefile
+++ b/arch/m68knommu/platform/5249/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o gpio.o
+obj-y := config.o gpio.o intc2.o
 
diff --git a/arch/m68knommu/platform/5249/intc2.c b/arch/m68knommu/platform/5249/intc2.c
new file mode 100644
index 00000000000..d09d9da0453
--- /dev/null
+++ b/arch/m68knommu/platform/5249/intc2.c
@@ -0,0 +1,59 @@
+/*
+ * intc2.c  -- support for the 2nd INTC controller of the 5249
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(unsigned int irq)
+{
+	u32 imr;
+	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	imr &= ~(0x1 << (irq - MCFINTC2_GPIOIRQ0));
+	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(unsigned int irq)
+{
+	u32 imr;
+	imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	imr |= (0x1 << (irq - MCFINTC2_GPIOIRQ0));
+	writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(unsigned int irq)
+{
+	writel(0x1 << (irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+	.name		= "CF-INTC2",
+	.mask		= intc2_irq_gpio_mask,
+	.unmask		= intc2_irq_gpio_unmask,
+	.ack		= intc2_irq_gpio_ack,
+};
+
+static int __init mcf_intc2_init(void)
+{
+	int irq;
+
+	/* GPIO interrupt sources */
+	for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++)
+		irq_desc[irq].chip = &intc2_irq_gpio_chip;
+
+	return 0;
+}
+
+arch_initcall(mcf_intc2_init);
-- 
cgit v1.2.3


From 9075216d2c8761c91dc268125f6580af3ffc58b5 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 7 Jul 2009 09:39:11 +1000
Subject: m68knommu: create a speciailized ColdFire 5272 interrupt controller

The ColdFire 5272 CPU has a very different interrupt controller than
any of the other ColdFire parts. It needs its own controller code to
correctly setup and ack interrupts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/m5272sim.h          |  37 +++++++-
 arch/m68knommu/platform/5272/Makefile     |   2 +-
 arch/m68knommu/platform/5272/intc.c       | 138 ++++++++++++++++++++++++++++++
 arch/m68knommu/platform/coldfire/Makefile |   2 +-
 4 files changed, 174 insertions(+), 5 deletions(-)
 create mode 100644 arch/m68knommu/platform/5272/intc.c

(limited to 'arch')

diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index 469686ffc4a..df3332c2317 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -12,7 +12,6 @@
 #define	m5272sim_h
 /****************************************************************************/
 
-
 /*
  *	Define the 5272 SIM register set addresses.
  */
@@ -76,8 +75,40 @@
 /*
  *	Define system peripheral IRQ usage.
  */
-#define	MCF_IRQ_TIMER		69		/* Timer0, Level 6 */
-#define	MCF_IRQ_PROFILER	70		/* Timer1, Level 7 */
+#define	MCFINT_VECBASE		64		/* Base of interrupts */
+#define	MCF_IRQ_SPURIOUS	64		/* User Spurious */
+#define	MCF_IRQ_EINT1		65		/* External Interrupt 1 */
+#define	MCF_IRQ_EINT2		66		/* External Interrupt 2 */
+#define	MCF_IRQ_EINT3		67		/* External Interrupt 3 */
+#define	MCF_IRQ_EINT4		68		/* External Interrupt 4 */
+#define	MCF_IRQ_TIMER1		69		/* Timer 1 */
+#define	MCF_IRQ_TIMER2		70		/* Timer 2 */
+#define	MCF_IRQ_TIMER3		71		/* Timer 3 */
+#define	MCF_IRQ_TIMER4		72		/* Timer 4 */
+#define	MCF_IRQ_UART1		73		/* UART 1 */
+#define	MCF_IRQ_UART2		74		/* UART 2 */
+#define	MCF_IRQ_PLIP		75		/* PLIC 2Khz Periodic */
+#define	MCF_IRQ_PLIA		76		/* PLIC Asynchronous */
+#define	MCF_IRQ_USB0		77		/* USB Endpoint 0 */
+#define	MCF_IRQ_USB1		78		/* USB Endpoint 1 */
+#define	MCF_IRQ_USB2		79		/* USB Endpoint 2 */
+#define	MCF_IRQ_USB3		80		/* USB Endpoint 3 */
+#define	MCF_IRQ_USB4		81		/* USB Endpoint 4 */
+#define	MCF_IRQ_USB5		82		/* USB Endpoint 5 */
+#define	MCF_IRQ_USB6		83		/* USB Endpoint 6 */
+#define	MCF_IRQ_USB7		84		/* USB Endpoint 7 */
+#define	MCF_IRQ_DMA		85		/* DMA Controller */
+#define	MCF_IRQ_ERX		86		/* Ethernet Receiver */
+#define	MCF_IRQ_ETX		87		/* Ethernet Transmitter */
+#define	MCF_IRQ_ENTC		88		/* Ethernet Non-Time Critical */
+#define	MCF_IRQ_QSPI		89		/* Queued Serial Interface */
+#define	MCF_IRQ_EINT5		90		/* External Interrupt 5 */
+#define	MCF_IRQ_EINT6		91		/* External Interrupt 6 */
+#define	MCF_IRQ_SWTO		92		/* Software Watchdog */
+#define	MCFINT_VECMAX		95		/* Maxmum interrupt */
+
+#define	MCF_IRQ_TIMER		MCF_IRQ_TIMER1
+#define	MCF_IRQ_PROFILER	MCF_IRQ_TIMER2
 
 /*
  * Generic GPIO support
diff --git a/arch/m68knommu/platform/5272/Makefile b/arch/m68knommu/platform/5272/Makefile
index 3d90e6d9245..93673ef8e2c 100644
--- a/arch/m68knommu/platform/5272/Makefile
+++ b/arch/m68knommu/platform/5272/Makefile
@@ -14,5 +14,5 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y := config.o gpio.o
+obj-y := config.o gpio.o intc.o
 
diff --git a/arch/m68knommu/platform/5272/intc.c b/arch/m68knommu/platform/5272/intc.c
new file mode 100644
index 00000000000..7081e0a9720
--- /dev/null
+++ b/arch/m68knommu/platform/5272/intc.c
@@ -0,0 +1,138 @@
+/*
+ * intc.c  --  interrupt controller or ColdFire 5272 SoC
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * The 5272 ColdFire interrupt controller is nothing like any other
+ * ColdFire interrupt controller - it truly is completely different.
+ * Given its age it is unlikely to be used on any other ColdFire CPU.
+ */
+
+/*
+ * The masking and priproty setting of interrupts on the 5272 is done
+ * via a set of 4 "Interrupt Controller Registers" (ICR). There is a
+ * loose mapping of vector number to register and internal bits, but
+ * a table is the easiest and quickest way to map them.
+ */
+struct irqmap {
+	unsigned char	icr;
+	unsigned char	index;
+	unsigned char	ack;
+};
+
+static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
+	/*MCF_IRQ_SPURIOUS*/	{ .icr = 0,           .index = 0,  .ack = 0, },
+	/*MCF_IRQ_EINT1*/	{ .icr = MCFSIM_ICR1, .index = 28, .ack = 1, },
+	/*MCF_IRQ_EINT2*/	{ .icr = MCFSIM_ICR1, .index = 24, .ack = 1, },
+	/*MCF_IRQ_EINT3*/	{ .icr = MCFSIM_ICR1, .index = 20, .ack = 1, },
+	/*MCF_IRQ_EINT4*/	{ .icr = MCFSIM_ICR1, .index = 16, .ack = 1, },
+	/*MCF_IRQ_TIMER1*/	{ .icr = MCFSIM_ICR1, .index = 12, .ack = 0, },
+	/*MCF_IRQ_TIMER2*/	{ .icr = MCFSIM_ICR1, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_TIMER3*/	{ .icr = MCFSIM_ICR1, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_TIMER4*/	{ .icr = MCFSIM_ICR1, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_UART1*/	{ .icr = MCFSIM_ICR2, .index = 28, .ack = 0, },
+	/*MCF_IRQ_UART2*/	{ .icr = MCFSIM_ICR2, .index = 24, .ack = 0, },
+	/*MCF_IRQ_PLIP*/	{ .icr = MCFSIM_ICR2, .index = 20, .ack = 0, },
+	/*MCF_IRQ_PLIA*/	{ .icr = MCFSIM_ICR2, .index = 16, .ack = 0, },
+	/*MCF_IRQ_USB0*/	{ .icr = MCFSIM_ICR2, .index = 12, .ack = 0, },
+	/*MCF_IRQ_USB1*/	{ .icr = MCFSIM_ICR2, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_USB2*/	{ .icr = MCFSIM_ICR2, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_USB3*/	{ .icr = MCFSIM_ICR2, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_USB4*/	{ .icr = MCFSIM_ICR3, .index = 28, .ack = 0, },
+	/*MCF_IRQ_USB5*/	{ .icr = MCFSIM_ICR3, .index = 24, .ack = 0, },
+	/*MCF_IRQ_USB6*/	{ .icr = MCFSIM_ICR3, .index = 20, .ack = 0, },
+	/*MCF_IRQ_USB7*/	{ .icr = MCFSIM_ICR3, .index = 16, .ack = 0, },
+	/*MCF_IRQ_DMA*/		{ .icr = MCFSIM_ICR3, .index = 12, .ack = 0, },
+	/*MCF_IRQ_ERX*/		{ .icr = MCFSIM_ICR3, .index = 8,  .ack = 0, },
+	/*MCF_IRQ_ETX*/		{ .icr = MCFSIM_ICR3, .index = 4,  .ack = 0, },
+	/*MCF_IRQ_ENTC*/	{ .icr = MCFSIM_ICR3, .index = 0,  .ack = 0, },
+	/*MCF_IRQ_QSPI*/	{ .icr = MCFSIM_ICR4, .index = 28, .ack = 0, },
+	/*MCF_IRQ_EINT5*/	{ .icr = MCFSIM_ICR4, .index = 24, .ack = 1, },
+	/*MCF_IRQ_EINT6*/	{ .icr = MCFSIM_ICR4, .index = 20, .ack = 1, },
+	/*MCF_IRQ_SWTO*/	{ .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
+};
+
+static void intc_irq_mask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		u32 v;
+		irq -= MCFINT_VECBASE;
+		v = 0x8 << intc_irqmap[irq].index;
+		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+	}
+}
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		u32 v;
+		irq -= MCFINT_VECBASE;
+		v = 0xd << intc_irqmap[irq].index;
+		writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+	}
+}
+
+static void intc_irq_ack(unsigned int irq)
+{
+	/* Only external interrupts are acked */
+	if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+		irq -= MCFINT_VECBASE;
+		if (intc_irqmap[irq].ack) {
+			u32 v;
+			v = 0xd << intc_irqmap[irq].index;
+			writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+		}
+	}
+}
+
+static int intc_irq_set_type(unsigned int irq, unsigned int type)
+{
+	/* We can set the edge type here for external interrupts */
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.mask		= intc_irq_mask,
+	.unmask		= intc_irq_unmask,
+	.ack		= intc_irq_ack,
+	.set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq;
+
+	init_vectors();
+
+	/* Mask all interrupt sources */
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR1);
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR2);
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR3);
+	writel(0x88888888, MCF_MBAR + MCFSIM_ICR4);
+
+	for (irq = 0; (irq < NR_IRQS); irq++) {
+		irq_desc[irq].status = IRQ_DISABLED;
+		irq_desc[irq].action = NULL;
+		irq_desc[irq].depth = 1;
+		irq_desc[irq].chip = &intc_irq_chip;
+		intc_irq_set_type(irq, 0);
+	}
+}
+
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 24ea95a2312..f72a0e5d999 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_M520x)	+= pit.o intc-simr.o
 obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o
 obj-$(CONFIG_M5249)	+= timers.o intc.o
 obj-$(CONFIG_M527x)	+= pit.o intc-2.o
-obj-$(CONFIG_M5272)	+= timers.o intc.o
+obj-$(CONFIG_M5272)	+= timers.o
 obj-$(CONFIG_M528x)	+= pit.o intc-2.o
 obj-$(CONFIG_M5307)	+= timers.o intc.o
 obj-$(CONFIG_M532x)	+= timers.o intc-simr.o
-- 
cgit v1.2.3


From 49802967cb7ec4f36a64e192108babe1c3b67e8e Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 7 Jul 2009 12:13:23 +1000
Subject: m68knommu: remove ColdFire direct interrupt register access

Now that the ColdFire 5272 has full interrupt controller functionality
we can remove all the interrupt masking and acking code from the FEC
ethernet driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/5272/config.c | 65 +++++------------------------------
 1 file changed, 8 insertions(+), 57 deletions(-)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c
index b16add9aa4e..59278c0887d 100644
--- a/arch/m68knommu/platform/5272/config.c
+++ b/arch/m68knommu/platform/5272/config.c
@@ -31,11 +31,11 @@ unsigned char ledbank = 0xff;
 static struct mcf_platform_uart m5272_uart_platform[] = {
 	{
 		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
+		.irq		= MCF_IRQ_UART1,
 	},
 	{
 		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
+		.irq		= MCF_IRQ_UART2,
 	},
 	{ },
 };
@@ -53,18 +53,18 @@ static struct resource m5272_fec_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= 86,
-		.end		= 86,
+		.start		= MCF_IRQ_ERX,
+		.end		= MCF_IRQ_ERX,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 87,
-		.end		= 87,
+		.start		= MCF_IRQ_ETX,
+		.end		= MCF_IRQ_ETX,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 88,
-		.end		= 88,
+		.start		= MCF_IRQ_ENTC,
+		.end		= MCF_IRQ_ENTC,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -88,9 +88,6 @@ static void __init m5272_uart_init_line(int line, int irq)
 	u32 v;
 
 	if ((line >= 0) && (line < 2)) {
-		v = (line) ? 0x0e000000 : 0xe0000000;
-		writel(v, MCF_MBAR + MCFSIM_ICR2);
-
 		/* Enable the output lines for the serial ports */
 		v = readl(MCF_MBAR + MCFSIM_PBCNT);
 		v = (v & ~0x000000ff) | 0x00000055;
@@ -113,48 +110,6 @@ static void __init m5272_uarts_init(void)
 
 /***************************************************************************/
 
-static void __init m5272_fec_init(void)
-{
-	u32 imr;
-
-	/* Unmask FEC interrupts at ColdFire interrupt controller */
-	imr = readl(MCF_MBAR + MCFSIM_ICR3);
-	imr = (imr & ~0x00000fff) | 0x00000ddd;
-	writel(imr, MCF_MBAR + MCFSIM_ICR3);
-
-	imr = readl(MCF_MBAR + MCFSIM_ICR1);
-	imr = (imr & ~0x0f000000) | 0x0d000000;
-	writel(imr, MCF_MBAR + MCFSIM_ICR1);
-}
-
-/***************************************************************************/
-
-void mcf_disableall(void)
-{
-	volatile unsigned long	*icrp;
-
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	icrp[0] = 0x88888888;
-	icrp[1] = 0x88888888;
-	icrp[2] = 0x88888888;
-	icrp[3] = 0x88888888;
-}
-
-/***************************************************************************/
-
-static void __init m5272_timers_init(void)
-{
-	/* Timer1 @ level6 is always used as system timer */
-	writel((0x8 | 0x6) << ((4 - 1) * 4), MCF_MBAR + MCFSIM_ICR1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 @ level7 is to be used as a high speed profile timer  */
-	writel((0x8 | 0x7) << ((4 - 2) * 4), MCF_MBAR + MCFSIM_ICR1);
-#endif
-}
-
-/***************************************************************************/
-
 static void m5272_cpu_reset(void)
 {
 	local_irq_disable();
@@ -178,8 +133,6 @@ void __init config_BSP(char *commandp, int size)
 	*pivrp = 0x40;
 #endif
 
-	mcf_disableall();
-
 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
 	/* Copy command line from FLASH to local buffer... */
 	memcpy(commandp, (char *) 0xf0004000, size);
@@ -191,7 +144,6 @@ void __init config_BSP(char *commandp, int size)
 #endif
 
 	mach_reset = m5272_cpu_reset;
-	m5272_timers_init();
 }
 
 /***************************************************************************/
@@ -199,7 +151,6 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
-	m5272_fec_init();
 	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 	return 0;
 }
-- 
cgit v1.2.3


From fe84c1087a6e2e76396cd4003a525c3110354ad0 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Tue, 11 Aug 2009 16:33:51 +1000
Subject: m68knommu: relax IO_SPACE_LIMIT setting

There is really no limit to the addresses which can be used by the
in*() and out*() family of IO space calls in m68k non-MMU environments.
So don't impose an artificial address limit, allow the full 32bit range.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/io_no.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 6adef1ee208..7f57436ec18 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -134,7 +134,7 @@ static inline void io_insl(unsigned int addr, void *buf, int len)
 #define insw(a,b,l) io_insw(a,b,l)
 #define insl(a,b,l) io_insl(a,b,l)
 
-#define IO_SPACE_LIMIT 0xffff
+#define IO_SPACE_LIMIT 0xffffffff
 
 
 /* Values for nocacheflag and cmode */
-- 
cgit v1.2.3


From d89395babbe811811e70c6ee3465e3b60c0cdc11 Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 12 Aug 2009 11:35:49 +1000
Subject: m68knommu: remove special interrupt handling code for ne2k support

The improved interrupt support for ColdFire CPU cores means we no
longer need all the interrupt setup and ack hacks to support the NE2000
driver on ColdFire platforms. Remove all that code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/mcfne.h | 83 -------------------------------------------
 1 file changed, 83 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
index 431f63aadd0..bf638be0958 100644
--- a/arch/m68k/include/asm/mcfne.h
+++ b/arch/m68k/include/asm/mcfne.h
@@ -238,88 +238,5 @@ void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
 #endif /* COLDFIRE_NE2000_FUNCS */
 #endif /* NE2000_OFFOFFSET */
 
-/****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- *	Lastly the interrupt set up code...
- *	Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned long	*icrp;
-	volatile unsigned long	*pitr;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77077777) | 0x00d00000;
-
-	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
-	*pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
-	volatile unsigned long	*icrp;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-	mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
 /****************************************************************************/
 #endif	/* mcfne_h */
-- 
cgit v1.2.3


From 14c16db3906ba9453e9c786323f872e11fd0f48d Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@uclinux.org>
Date: Wed, 12 Aug 2009 16:14:43 +1000
Subject: m68knommu: set multi-function pins for ethernet when enabled

The ethernet pins on the 532x ColdFire CPU family are multi-function
pins. We need to enable them as ethernet pins when using the FEC
ethernet driver.

Bug report, and older patch, from timothee@manaud.net.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68knommu/platform/523x/config.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c
index 00f08d2e43b..6ba84f2aa39 100644
--- a/arch/m68knommu/platform/523x/config.c
+++ b/arch/m68knommu/platform/523x/config.c
@@ -82,6 +82,20 @@ static struct platform_device *m523x_devices[] __initdata = {
 
 /***************************************************************************/
 
+static void __init m523x_fec_init(void)
+{
+	u16 par;
+	u8 v;
+
+	/* Set multi-function pins to ethernet use */
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100078);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+}
+
+/***************************************************************************/
+
 static void m523x_cpu_reset(void)
 {
 	local_irq_disable();
@@ -99,6 +113,7 @@ void __init config_BSP(char *commandp, int size)
 
 static int __init init_BSP(void)
 {
+	m523x_fec_init();
 	platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
 	return 0;
 }
-- 
cgit v1.2.3


From 2756730b798e4f1f8343cf034c33cc730ae3a5d4 Mon Sep 17 00:00:00 2001
From: Philippe De Muyter <phdm@macqel.be>
Date: Wed, 12 Aug 2009 16:35:28 +1000
Subject: m68knommu: fix ColdFire definition of CLOCK_TICK_RATE

The good definition of CLOCK_TICK_RATE for coldfires has been lost in the
merge of m68k and m68knommu include files.  Restore it.  Culprit :
commit ebafc17468d58bd903c886175ca84a4edc69ae1d

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/timex.h | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
index b87f2f278f6..6759dad954f 100644
--- a/arch/m68k/include/asm/timex.h
+++ b/arch/m68k/include/asm/timex.h
@@ -3,10 +3,23 @@
  *
  * m68k architecture timex specifications
  */
-#ifndef _ASMm68k_TIMEX_H
-#define _ASMm68k_TIMEX_H
+#ifndef _ASMm68K_TIMEX_H
+#define _ASMm68K_TIMEX_H
 
+#ifdef CONFIG_COLDFIRE
+/*
+ * CLOCK_TICK_RATE should give the underlying frequency of the tick timer
+ * to make ntp work best.  For Coldfires, that's the main clock.
+ */
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE	MCF_CLK
+#else
+/*
+ * This default CLOCK_TICK_RATE is probably wrong for many 68k boards
+ * Users of those boards will need to check and modify accordingly
+ */
 #define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+#endif
 
 typedef unsigned long cycles_t;
 
-- 
cgit v1.2.3


From 2985709d7f3078c7609ae7f16affc0fb478d7d7a Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Mon, 7 Sep 2009 17:26:49 +1000
Subject: m68knommu: Make PAGE_SIZE available to assembly files.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/page_no.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 9aa3f90f485..1f31b060cc8 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -1,10 +1,12 @@
 #ifndef _M68KNOMMU_PAGE_H
 #define _M68KNOMMU_PAGE_H
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 
 #define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #include <asm/setup.h>
-- 
cgit v1.2.3


From 9adb15b80bf1dc6b30a584e76efc876dfd029a13 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Tue, 8 Sep 2009 14:26:00 +0900
Subject: ARM: S3C6410: use correct divider_shift in setrate_clksrc()

In s3c64xx_setrate_clksrc() we used sclk->shift, but actually need to
use sclk->divider_shift to correctly calculate the value for the divider
register.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[ben-linux@fluff.org: Minor re-indentation of description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index febac1950d8..c972d2f8c27 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -302,8 +302,8 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
-- 
cgit v1.2.3


From 6d025ac2fcf9d736ee399efddae74a3362dfa7da Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Tue, 8 Sep 2009 14:30:48 +0900
Subject: ARM: S3C6410: update clk->parent when setting clock source

This ensures the clock hierarchy data structures are updated when we
change the clock source in the actual hardware registers.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
[ben-linux@fluff.org: Minor re-indentation of subject]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index c972d2f8c27..54eef9326c2 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -328,6 +328,8 @@ static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent)
 		clksrc |= src_nr << sclk->shift;
 
 		__raw_writel(clksrc, S3C_CLK_SRC);
+
+		clk->parent = parent;
 		return 0;
 	}
 
-- 
cgit v1.2.3


From 5e49bc4d9e982bbfdaf7d6cf8bd96e43bd9f7db6 Mon Sep 17 00:00:00 2001
From: Thomas Abraham <thomas.ab@samsung.com>
Date: Tue, 8 Sep 2009 14:35:29 +0900
Subject: ARM: S3C64XX: Fix divider value calculation in
 s3c64xx_roundrate_clksrc

In s3c64xx_roundrate_clksrc function, the calculation is wrong. This
patch fixes this calculation.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/s3c6400-clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 54eef9326c2..9745852261e 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -345,7 +345,7 @@ static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk,
 	if (rate > parent_rate)
 		rate = parent_rate;
 	else {
-		div = rate / parent_rate;
+		div = parent_rate / rate;
 
 		if (div == 0)
 			div = 1;
-- 
cgit v1.2.3


From 23c94b47be85207a8a9e0ac3ac89b16edf6356f0 Mon Sep 17 00:00:00 2001
From: Jassi <jassi.brar@samsung.com>
Date: Tue, 15 Sep 2009 19:01:18 +0900
Subject: ARM: S3C64XX: DMA: struct s3c64xx_dma_buff lli fix.

Correct the lli structure in struct s3c64xx_dma_buff which should
have been 'struct pl080s_lli' (samsung specific) instead of the generic
version 'struct pl080_lli'

Signed-Off-by: Jassi <jassi.brar@samsung.com>
[ben-linux@fluff.org: Edited description and subject fields]

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/dma-plat.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
index 0c30dd98672..8f76a1e474d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -26,7 +26,7 @@ struct s3c64xx_dma_buff {
 	struct s3c64xx_dma_buff *next;
 
 	void			*pw;
-	struct pl080_lli	*lli;
+	struct pl080s_lli	*lli;
 	dma_addr_t		 lli_dma;
 };
 
-- 
cgit v1.2.3


From 3ea61e49223c499c705b80ea385cb4df9c08da21 Mon Sep 17 00:00:00 2001
From: Jassi <jassi.brar@samsung.com>
Date: Tue, 15 Sep 2009 19:01:19 +0900
Subject: ARM: S3C64XX: DMA: 'size' argument of dma_pool_create

Provide actual minimum(struct pl080s_lli) size of block to
dma_pool_create call, instead of hardcoded 32 bytes.

Signed-Off-by: Jassi <jassi.brar@samsung.com>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 67aa93dbb69..b26d2a242d9 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -697,7 +697,7 @@ static int __init s3c64xx_dma_init(void)
 
 	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 
-	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
 	if (!dma_pool) {
 		printk(KERN_ERR "%s: failed to create pool\n", __func__);
 		return -ENOMEM;
-- 
cgit v1.2.3


From b93011e72c1476b08ff62977ecf648080ba38c1a Mon Sep 17 00:00:00 2001
From: Jassi <jassi.brar@samsung.com>
Date: Tue, 15 Sep 2009 19:01:20 +0900
Subject: ARM: S3C64XX: DMA: Debugged alloc's with GFP_KERNEL flag in Intr
 context.

s3c2410_dma_enqueue makes call to kzalloc and dma_pool_alloc with GFP_KERNEL
flag set, this can be an issue for drivers, like I2S, which call
s3c2410_dma_enqueue from dma-bufferdone callback.

Change the flag GFP_KERNEL to GFP_ATOMIC to avoid any problems.

Signed-Off-by: Jassi <jassi.brar@samsung.com>
[ben-linux@fluff.org: Minor description edit and re-wrap]

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/dma.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index b26d2a242d9..266a10745a8 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -345,13 +345,13 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 	if (!chan)
 		return -EINVAL;
 
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
 	if (!buff) {
 		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
 		return -ENOMEM;
 	}
 
-	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
 	if (!lli) {
 		printk(KERN_ERR "%s: no memory for lli\n", __func__);
 		ret = -ENOMEM;
-- 
cgit v1.2.3


From 09d3f3f0e02c8a900d076c302c5c02227f33572d Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 15 Sep 2009 17:04:38 -0700
Subject: sparc: Kill PROM console driver.

Many years ago when this driver was written, it had a use, but these
days it's nothing but trouble and distributions should not enable it
in any situation.

Pretty much every console device a sparc machine could see has a
bonafide real driver, making the PROM console hack unnecessary.

If any new device shows up, we should write a driver instead of
depending upon this crutch to save us.  We've been able to take care
of this even when no chip documentation exists (sunxvr500, sunxvr2500)
so there are no excuses.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/setup_32.c | 2 --
 arch/sparc/kernel/setup_64.c | 2 --
 2 files changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 16a47ffe03c..9be2af55c5c 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -268,8 +268,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
-#elif defined(CONFIG_PROM_CONSOLE)
-	conswitchp = &prom_con;
 #endif
 	boot_flags_init(*cmdline_p);
 
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index f2bcfd2967d..21180339cb0 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -295,8 +295,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
-#elif defined(CONFIG_PROM_CONSOLE)
-	conswitchp = &prom_con;
 #endif
 
 	idprom_init();
-- 
cgit v1.2.3


From a74f7e0410da9da7942cf4f08bbdb0e4fc76f972 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 16 Sep 2009 14:30:34 +0900
Subject: sh: Wire up HAVE_SYSCALL_TRACEPOINTS.

This is necessary to get ftrace syscall tracing working again.. a fairly
trivial and mechanical change. The one benefit is that this can also be
enabled on sh64, despite not having its own ftrace port.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/Kconfig                   |  1 +
 arch/sh/include/asm/thread_info.h |  8 ++++----
 arch/sh/kernel/ptrace_32.c        | 15 ++++++---------
 arch/sh/kernel/ptrace_64.c        |  9 +++++++++
 4 files changed, 20 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2f5352c06a0..4df3570fe51 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -20,6 +20,7 @@ config SUPERH
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_SYSCALL_TRACEPOINTS
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	help
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index 5123bcaa850..bdeb9d46d17 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -116,7 +116,7 @@ extern void free_thread_info(struct thread_info *ti);
 #define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
 #define TIF_SECCOMP		6	/* secure computing */
 #define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
-#define TIF_SYSCALL_FTRACE	8	/* for ftrace syscall instrumentation */
+#define TIF_SYSCALL_TRACEPOINT	8	/* for ftrace syscall instrumentation */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18
@@ -130,7 +130,7 @@ extern void free_thread_info(struct thread_info *ti);
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SYSCALL_FTRACE	(1 << TIF_SYSCALL_FTRACE)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_USEDFPU		(1 << TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
@@ -144,13 +144,13 @@ extern void free_thread_info(struct thread_info *ti);
 /* work to do in syscall trace */
 #define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
 				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP    | \
-				 _TIF_SYSCALL_FTRACE)
+				 _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
 				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
 				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
-				 _TIF_NOTIFY_RESUME | _TIF_SYSCALL_FTRACE)
+				 _TIF_NOTIFY_RESUME | _TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index f4f58e438a2..9be35f34809 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -34,7 +34,8 @@
 #include <asm/syscalls.h>
 #include <asm/fpu.h>
 
-#include <trace/syscall.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
 
 /*
  * This routine will get a word off of the process kernel stack.
@@ -461,10 +462,8 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1L;
 
-#ifdef CONFIG_FTRACE_SYSCALLS
-	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
-		ftrace_syscall_enter(regs);
-#endif
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[0]);
 
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[3],
@@ -482,10 +481,8 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
 				   regs->regs[0]);
 
-#ifdef CONFIG_FTRACE_SYSCALLS
-	if (unlikely(test_thread_flag(TIF_SYSCALL_FTRACE)))
-		ftrace_syscall_exit(regs);
-#endif
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[0]);
 
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index 695097438f0..952da83903d 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -40,6 +40,9 @@
 #include <asm/syscalls.h>
 #include <asm/fpu.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
 /* This mask defines the bits of the SR which the user is not allowed to
    change, which are everything except S, Q, M, PR, SZ, FR. */
 #define SR_MASK      (0xffff8cfd)
@@ -438,6 +441,9 @@ asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1LL;
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_enter(regs, regs->regs[9]);
+
 	if (unlikely(current->audit_context))
 		audit_syscall_entry(audit_arch(), regs->regs[1],
 				    regs->regs[2], regs->regs[3],
@@ -452,6 +458,9 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
 				   regs->regs[9]);
 
+	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+		trace_sys_exit(regs, regs->regs[9]);
+
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall_exit(regs, 0);
 }
-- 
cgit v1.2.3


From 480c646c32f368dfa2a076f7a120a7795e786e62 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 16 Sep 2009 15:06:39 +0900
Subject: sh: Kill off unused se_skipped in alignment trap notification code.

Nothing is using this, resulting in a build error with certain
configurations. Just kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 583ace55b0d..6aba9af79ea 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -47,7 +47,6 @@
 
 static unsigned long se_user;
 static unsigned long se_sys;
-static unsigned long se_skipped;
 static unsigned long se_half;
 static unsigned long se_word;
 static unsigned long se_dword;
@@ -77,7 +76,6 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
 
 	p += sprintf(p, "User:\t\t%lu\n", se_user);
 	p += sprintf(p, "System:\t\t%lu\n", se_sys);
-	p += sprintf(p, "Skipped:\t%lu\n", se_skipped);
 	p += sprintf(p, "Half:\t\t%lu\n", se_half);
 	p += sprintf(p, "Word:\t\t%lu\n", se_word);
 	p += sprintf(p, "DWord:\t\t%lu\n", se_dword);
-- 
cgit v1.2.3


From 0a375d75902c522ea36c6dc409296622f93db4a7 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 16 Sep 2009 00:31:26 -0700
Subject: sparc: Update defconfigs.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/configs/sparc32_defconfig | 44 +++++++++++++++++--------------
 arch/sparc/configs/sparc64_defconfig | 51 +++++++++++++++++++++---------------
 2 files changed, 55 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index a0f62a808ed..983d59824a2 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Tue Aug 18 23:45:52 2009
+# Linux kernel version: 2.6.31
+# Wed Sep 16 00:03:43 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_SPARC=y
@@ -39,11 +39,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,10 +88,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 # CONFIG_STRIP_ASM_SYMS is not set
@@ -102,6 +105,8 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -169,6 +174,7 @@ CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_SUN_PM=y
 # CONFIG_SPARC_LED is not set
 CONFIG_SERIAL_CONSOLE=y
+# CONFIG_SPARC_LEON is not set
 
 #
 # Bus options (PCI etc.)
@@ -259,6 +265,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -288,6 +295,7 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -295,7 +303,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -426,6 +433,7 @@ CONFIG_SCSI_QLOGICPTI=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_SUNESP=y
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -524,12 +532,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -569,11 +572,11 @@ CONFIG_INPUT_EVBUG=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-CONFIG_KEYBOARD_SUNKBD=m
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SUNKBD=m
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ALPS=y
@@ -581,6 +584,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -708,12 +712,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Console display driver support
 #
-# CONFIG_PROM_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -814,6 +816,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -877,7 +880,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -984,14 +986,17 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_KGDB=y
@@ -1014,7 +1019,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1057,11 +1061,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index fdddf7a6f72..f80b881dfea 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Tue Aug 18 23:56:02 2009
+# Linux kernel version: 2.6.31
+# Tue Sep 15 17:06:03 2009
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -19,7 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
@@ -48,11 +48,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_GROUP_SCHED=y
@@ -96,10 +97,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+CONFIG_PERF_COUNTERS=y
+CONFIG_EVENT_PROFILE=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
@@ -119,7 +123,9 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -317,6 +323,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -349,6 +356,7 @@ CONFIG_NET_TCPPROBE=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -356,7 +364,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -549,6 +556,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SUNESP is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -704,12 +712,7 @@ CONFIG_NIU=m
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -768,11 +771,11 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=y
 CONFIG_KEYBOARD_LKKBD=m
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -780,6 +783,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -883,7 +887,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
 
@@ -1102,7 +1105,6 @@ CONFIG_FB_ATY_GX=y
 #
 # Console display driver support
 #
-# CONFIG_PROM_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -1124,6 +1126,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_SUN_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1232,7 +1235,6 @@ CONFIG_SND_SUN_CS4231=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1256,6 +1258,7 @@ CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1289,6 +1292,7 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
@@ -1379,6 +1383,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1493,6 +1498,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1553,7 +1559,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1656,12 +1661,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -1692,6 +1699,7 @@ CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1716,7 +1724,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1759,11 +1766,13 @@ CONFIG_CRYPTO_XTS=m
 #
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-- 
cgit v1.2.3


From 54e2603f1a85b9725aa13518d69148b6e7061aa9 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 16 Sep 2009 08:42:26 +0200
Subject: x86: platform: Fix section annotations

init_IRQ() and x86_late_time_init() are missing __init annotations.

The x86 platform ops variables are annotated, but the annotation needs
to be put between the variable name and the "=" of the initializer.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/irqinit.c  | 2 +-
 arch/x86/kernel/time.c     | 2 +-
 arch/x86/kernel/x86_init.c | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index e0142cda239..73b16649b7d 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -140,7 +140,7 @@ void __init init_ISA_irqs(void)
 	}
 }
 
-void init_IRQ(void)
+void __init init_IRQ(void)
 {
 	x86_init.irqs.intr_init();
 }
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index fcece00356a..e293ac56c72 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -105,7 +105,7 @@ void __init hpet_time_init(void)
 	setup_default_timer_irq();
 }
 
-static void x86_late_time_init(void)
+static __init void x86_late_time_init(void)
 {
 	x86_init.timers.timer_init();
 	tsc_init();
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 24be7f39789..68824c7be4e 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -23,7 +23,7 @@ void __init x86_init_pgd_noop(pgd_t *unused) { }
  * The platform setup functions are preset with the default functions
  * for standard PC hardware.
  */
-struct __initdata x86_init_ops x86_init = {
+struct x86_init_ops x86_init __initdata = {
 
 	.resources = {
 		.probe_roms		= x86_init_noop,
@@ -64,7 +64,7 @@ struct __initdata x86_init_ops x86_init = {
 	},
 };
 
-__cpuinitdata struct x86_cpuinit_ops x86_cpuinit = {
+struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
 };
 
-- 
cgit v1.2.3


From 7c423e98856df9b941223a7e7845b2502ad84b00 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 16 Sep 2009 09:38:24 +0200
Subject: sched: x86: Name old_perf in a unique way

Silly percpu bits don't respect static..

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
---
 arch/x86/kernel/cpu/sched.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/sched.c b/arch/x86/kernel/cpu/sched.c
index 6c00a8f3cce..a640ae5ad20 100644
--- a/arch/x86/kernel/cpu/sched.c
+++ b/arch/x86/kernel/cpu/sched.c
@@ -8,11 +8,11 @@
 
 #ifdef CONFIG_SMP
 
-static DEFINE_PER_CPU(struct aperfmperf, old_perf);
+static DEFINE_PER_CPU(struct aperfmperf, old_perf_sched);
 
 static unsigned long scale_aperfmperf(void)
 {
-	struct aperfmperf val, *old = &__get_cpu_var(old_perf);
+	struct aperfmperf val, *old = &__get_cpu_var(old_perf_sched);
 	unsigned long ratio, flags;
 
 	local_irq_save(flags);
-- 
cgit v1.2.3


From 6a8126911a5ab167783fce18ae9cc70ec9b84fe2 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 16 Sep 2009 11:33:40 +0200
Subject: x86, EDAC: Provide function to return NodeId of a CPU

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/processor.h |  2 ++
 arch/x86/kernel/cpu/amd.c        | 10 ++++++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index e08ea043e08..42a3f936dad 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -1020,4 +1020,6 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
 extern int get_tsc_mode(unsigned long adr);
 extern int set_tsc_mode(unsigned int val);
 
+extern int amd_get_nb_id(int cpu);
+
 #endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 22a47c82f3c..f32fa71ccf9 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -333,6 +333,16 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 #endif
 }
 
+int amd_get_nb_id(int cpu)
+{
+	int id = 0;
+#ifdef CONFIG_SMP
+	id = per_cpu(cpu_llc_id, cpu);
+#endif
+	return id;
+}
+EXPORT_SYMBOL_GPL(amd_get_nb_id);
+
 static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 {
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
-- 
cgit v1.2.3


From a6e04aa92965565968573a220a35b4e907385697 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Wed, 16 Sep 2009 11:50:09 +0200
Subject: HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault
 handler v2

Add VM_FAULT_HWPOISON handling to the x86 page fault handler. This is
very similar to VM_FAULT_OOM, the only difference is that a different
si_code is passed to user space and the new addr_lsb field is initialized.

v2: Make the printk more verbose/unique

Cc: x86@kernel.org

Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 arch/x86/mm/fault.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 775a020990a..8ba56240820 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -167,6 +167,7 @@ force_sig_info_fault(int si_signo, int si_code, unsigned long address,
 	info.si_errno	= 0;
 	info.si_code	= si_code;
 	info.si_addr	= (void __user *)address;
+	info.si_addr_lsb = si_code == BUS_MCEERR_AR ? PAGE_SHIFT : 0;
 
 	force_sig_info(si_signo, &info, tsk);
 }
@@ -790,10 +791,12 @@ out_of_memory(struct pt_regs *regs, unsigned long error_code,
 }
 
 static void
-do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
+do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
+	  unsigned int fault)
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
+	int code = BUS_ADRERR;
 
 	up_read(&mm->mmap_sem);
 
@@ -809,7 +812,15 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
 	tsk->thread.error_code	= error_code;
 	tsk->thread.trap_no	= 14;
 
-	force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
+#ifdef CONFIG_MEMORY_FAILURE
+	if (fault & VM_FAULT_HWPOISON) {
+		printk(KERN_ERR
+	"MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n",
+			tsk->comm, tsk->pid, address);
+		code = BUS_MCEERR_AR;
+	}
+#endif
+	force_sig_info_fault(SIGBUS, code, address, tsk);
 }
 
 static noinline void
@@ -819,8 +830,8 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code,
 	if (fault & VM_FAULT_OOM) {
 		out_of_memory(regs, error_code, address);
 	} else {
-		if (fault & VM_FAULT_SIGBUS)
-			do_sigbus(regs, error_code, address);
+		if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON))
+			do_sigbus(regs, error_code, address, fault);
 		else
 			BUG();
 	}
-- 
cgit v1.2.3


From 7bd867dfb4e0357e06a3211ab2bd0e714110def3 Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Thu, 10 Sep 2009 10:48:56 +0800
Subject: x86: Move get/set_wallclock to x86_platform_ops

get/set_wallclock() have already a set of platform dependent
implementations (default, EFI, paravirt). MRST will add another
variant.

Moving them to platform ops simplifies the existing code and minimizes
the effort to integrate new variants.

Signed-off-by: Feng Tang <feng.tang@intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/paravirt.h       | 10 -------
 arch/x86/include/asm/paravirt_types.h |  4 ---
 arch/x86/include/asm/time.h           | 50 -----------------------------------
 arch/x86/include/asm/x86_init.h       |  4 +++
 arch/x86/kernel/efi.c                 |  4 +++
 arch/x86/kernel/kvmclock.c            |  4 +--
 arch/x86/kernel/paravirt.c            |  2 --
 arch/x86/kernel/rtc.c                 | 12 +++------
 arch/x86/kernel/vmi_32.c              |  4 +--
 arch/x86/kernel/x86_init.c            |  2 ++
 arch/x86/lguest/boot.c                |  4 +--
 arch/x86/xen/enlighten.c              |  4 +--
 12 files changed, 21 insertions(+), 83 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 1e458a55330..a69ae87bd7d 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -24,16 +24,6 @@ static inline void load_sp0(struct tss_struct *tss,
 	PVOP_VCALL2(pv_cpu_ops.load_sp0, tss, thread);
 }
 
-static inline unsigned long get_wallclock(void)
-{
-	return PVOP_CALL0(unsigned long, pv_time_ops.get_wallclock);
-}
-
-static inline int set_wallclock(unsigned long nowtime)
-{
-	return PVOP_CALL1(int, pv_time_ops.set_wallclock, nowtime);
-}
-
 /* The paravirtualized CPUID instruction. */
 static inline void __cpuid(unsigned int *eax, unsigned int *ebx,
 			   unsigned int *ecx, unsigned int *edx)
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 0d812e592e3..c25d5e3bdf9 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -88,10 +88,6 @@ struct pv_lazy_ops {
 };
 
 struct pv_time_ops {
-	/* Set and set time of day */
-	unsigned long (*get_wallclock)(void);
-	int (*set_wallclock)(unsigned long);
-
 	unsigned long long (*sched_clock)(void);
 	unsigned long (*get_tsc_khz)(void);
 };
diff --git a/arch/x86/include/asm/time.h b/arch/x86/include/asm/time.h
index 9c5608b21c2..7bdec4e9b73 100644
--- a/arch/x86/include/asm/time.h
+++ b/arch/x86/include/asm/time.h
@@ -4,57 +4,7 @@
 extern void hpet_time_init(void);
 
 #include <asm/mc146818rtc.h>
-#ifdef CONFIG_X86_32
-#include <linux/efi.h>
-
-static inline unsigned long native_get_wallclock(void)
-{
-	unsigned long retval;
-
-	if (efi_enabled)
-		retval = efi_get_time();
-	else
-		retval = mach_get_cmos_time();
-
-	return retval;
-}
-
-static inline int native_set_wallclock(unsigned long nowtime)
-{
-	int retval;
-
-	if (efi_enabled)
-		retval = efi_set_rtc_mmss(nowtime);
-	else
-		retval = mach_set_rtc_mmss(nowtime);
-
-	return retval;
-}
-
-#else
-extern void native_time_init_hook(void);
-
-static inline unsigned long native_get_wallclock(void)
-{
-	return mach_get_cmos_time();
-}
-
-static inline int native_set_wallclock(unsigned long nowtime)
-{
-	return mach_set_rtc_mmss(nowtime);
-}
-
-#endif
 
 extern void time_init(void);
 
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else /* !CONFIG_PARAVIRT */
-
-#define get_wallclock() native_get_wallclock()
-#define set_wallclock(x) native_set_wallclock(x)
-
-#endif /* CONFIG_PARAVIRT */
-
 #endif /* _ASM_X86_TIME_H */
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index b6c89428137..2c756fd4ab0 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -114,9 +114,13 @@ struct x86_cpuinit_ops {
 /**
  * struct x86_platform_ops - platform specific runtime functions
  * @calibrate_tsc:		calibrate TSC
+ * @get_wallclock:		get time from HW clock like RTC etc.
+ * @set_wallclock:		set time back to HW clock
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
+	unsigned long (*get_wallclock)(void);
+	int (*set_wallclock)(unsigned long nowtime);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index fe26ba3e345..ad5bd988fb7 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -42,6 +42,7 @@
 #include <asm/time.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
+#include <asm/x86_init.h>
 
 #define EFI_DEBUG	1
 #define PFX 		"EFI: "
@@ -453,6 +454,9 @@ void __init efi_init(void)
 	if (add_efi_memmap)
 		do_add_efi_memmap();
 
+	x86_platform.get_wallclock = efi_get_time;
+	x86_platform.set_wallclock = efi_set_rtc_mmss;
+
 	/* Setup for EFI runtime service */
 	reboot_type = BOOT_EFI;
 
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 75a21b61b86..59ab94db12e 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -184,10 +184,10 @@ void __init kvmclock_init(void)
 	if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) {
 		if (kvm_register_clock("boot clock"))
 			return;
-		pv_time_ops.get_wallclock = kvm_get_wallclock;
-		pv_time_ops.set_wallclock = kvm_set_wallclock;
 		pv_time_ops.sched_clock = kvm_clock_read;
 		x86_platform.calibrate_tsc = kvm_get_tsc_khz;
+		x86_platform.get_wallclock = kvm_get_wallclock;
+		x86_platform.set_wallclock = kvm_set_wallclock;
 #ifdef CONFIG_X86_LOCAL_APIC
 		x86_cpuinit.setup_percpu_clockev =
 			kvm_setup_secondary_clock;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 7cbf898d839..c0fb85aed43 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -306,8 +306,6 @@ struct pv_init_ops pv_init_ops = {
 };
 
 struct pv_time_ops pv_time_ops = {
-	.get_wallclock = native_get_wallclock,
-	.set_wallclock = native_set_wallclock,
 	.sched_clock = native_sched_clock,
 };
 
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 5d465b207e7..b8652f2e685 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -8,6 +8,7 @@
 #include <linux/pnp.h>
 
 #include <asm/vsyscall.h>
+#include <asm/x86_init.h>
 #include <asm/time.h>
 
 #ifdef CONFIG_X86_32
@@ -165,13 +166,13 @@ void rtc_cmos_write(unsigned char val, unsigned char addr)
 }
 EXPORT_SYMBOL(rtc_cmos_write);
 
-static int set_rtc_mmss(unsigned long nowtime)
+int update_persistent_clock(struct timespec now)
 {
 	unsigned long flags;
 	int retval;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	retval = set_wallclock(nowtime);
+	retval = x86_platform.set_wallclock(now.tv_sec);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return retval;
@@ -183,17 +184,12 @@ unsigned long read_persistent_clock(void)
 	unsigned long retval, flags;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	retval = get_wallclock();
+	retval = x86_platform.get_wallclock();
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return retval;
 }
 
-int update_persistent_clock(struct timespec now)
-{
-	return set_rtc_mmss(now.tv_sec);
-}
-
 unsigned long long native_read_tsc(void)
 {
 	return __native_read_tsc();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 052ae81ee08..31e6f6cfe53 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -818,14 +818,14 @@ static inline int __init activate_vmi(void)
 		vmi_timer_ops.cancel_alarm =
 			 vmi_get_function(VMI_CALL_CancelAlarm);
 		x86_init.timers.timer_init = vmi_time_init;
-		pv_time_ops.get_wallclock = vmi_get_wallclock;
-		pv_time_ops.set_wallclock = vmi_set_wallclock;
 #ifdef CONFIG_X86_LOCAL_APIC
 		x86_init.timers.setup_percpu_clockev = vmi_time_bsp_init;
 		x86_cpuinit.setup_percpu_clockev = vmi_time_ap_init;
 #endif
 		pv_time_ops.sched_clock = vmi_sched_clock;
 		x86_platform.calibrate_tsc = vmi_tsc_khz;
+		x86_platform.get_wallclock = vmi_get_wallclock;
+		x86_platform.set_wallclock = vmi_set_wallclock;
 
 		/* We have true wallclock functions; disable CMOS clock sync */
 		no_sync_cmos_clock = 1;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 68824c7be4e..4449a4a2c2e 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -70,4 +70,6 @@ struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 
 struct x86_platform_ops x86_platform = {
 	.calibrate_tsc			= native_calibrate_tsc,
+	.get_wallclock			= mach_get_cmos_time,
+	.set_wallclock			= mach_set_rtc_mmss,
 };
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index fabe745513d..4cb7d5d18b8 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1318,13 +1318,11 @@ __init void lguest_init(void)
 	set_lguest_basic_apic_ops();
 #endif
 
-	/* Time operations */
-	pv_time_ops.get_wallclock = lguest_get_wallclock;
-
 	x86_init.resources.memory_setup = lguest_memory_setup;
 	x86_init.irqs.intr_init = lguest_init_IRQ;
 	x86_init.timers.timer_init = lguest_time_init;
 	x86_platform.calibrate_tsc = lguest_tsc_khz;
+	x86_platform.get_wallclock =  lguest_get_wallclock;
 
 	/*
 	 * Now is a good time to look at the implementations of these functions
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index ee8cac77c8a..b5bf8b9119a 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -842,8 +842,6 @@ static const struct pv_init_ops xen_init_ops __initdata = {
 };
 
 static const struct pv_time_ops xen_time_ops __initdata = {
-	.set_wallclock = xen_set_wallclock,
-	.get_wallclock = xen_get_wallclock,
 	.sched_clock = xen_sched_clock,
 };
 
@@ -980,6 +978,8 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_cpuinit.setup_percpu_clockev = x86_init_noop;
 
 	x86_platform.calibrate_tsc = xen_tsc_khz;
+	x86_platform.get_wallclock = xen_get_wallclock;
+	x86_platform.set_wallclock = xen_set_wallclock;
 
 #ifdef CONFIG_X86_64
 	/*
-- 
cgit v1.2.3


From 182a85f8a119c789610a9d464f4129ded9f3c107 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 16 Sep 2009 13:24:49 +0200
Subject: sched: Disable wakeup balancing

Sysbench thinks SD_BALANCE_WAKE is too agressive and kbuild doesn't
really mind too much, SD_BALANCE_NEWIDLE picks up most of the
slack.

On a dual socket, quad core, dual thread nehalem system:

sysbench (--num_threads=16):

 SD_BALANCE_WAKE-: 13982 tx/s
 SD_BALANCE_WAKE+: 15688 tx/s

kbuild (-j16):

 SD_BALANCE_WAKE-: 47.648295846  seconds time elapsed   ( +-   0.312% )
 SD_BALANCE_WAKE+: 47.608607360  seconds time elapsed   ( +-   0.026% )

(same within noise)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/topology.h           | 2 --
 arch/mips/include/asm/mach-ip27/topology.h | 1 -
 arch/powerpc/include/asm/topology.h        | 1 -
 arch/sh/include/asm/topology.h             | 1 -
 arch/sparc/include/asm/topology_64.h       | 1 -
 arch/x86/include/asm/topology.h            | 2 +-
 6 files changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index 569b9dafc78..d0141fbf51d 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -68,7 +68,6 @@ void build_cpu_to_node_map(void);
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
-				| SD_BALANCE_WAKE	\
 				| SD_WAKE_AFFINE,	\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
@@ -94,7 +93,6 @@ void build_cpu_to_node_map(void);
 				| SD_BALANCE_NEWIDLE	\
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
-				| SD_BALANCE_WAKE	\
 				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 64,			\
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index d8332398f5b..23059170700 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -48,7 +48,6 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
 	.cache_nice_tries	= 1,			\
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_WAKE,	\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
 	.nr_balance_failed	= 0,			\
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 1a2c9eb42a0..394edcbcce7 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -63,7 +63,6 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 				| SD_BALANCE_EXEC	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_NEWIDLE	\
-				| SD_BALANCE_WAKE	\
 				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index a8cc564b703..f8c40cc6505 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -21,7 +21,6 @@
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_WAKE	\
 				| SD_BALANCE_NEWIDLE	\
 				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 10b979d1de2..26cd25c0839 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -57,7 +57,6 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 	.flags			= SD_LOAD_BALANCE	\
 				| SD_BALANCE_FORK	\
 				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_WAKE	\
 				| SD_SERIALIZE,		\
 	.last_balance		= jiffies,		\
 	.balance_interval	= 1,			\
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 589f12383d7..6f0695d744b 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -141,7 +141,7 @@ extern unsigned long node_remap_size[];
 				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
-				| 1*SD_BALANCE_WAKE			\
+				| 0*SD_BALANCE_WAKE			\
 				| 1*SD_WAKE_AFFINE			\
 				| 0*SD_SHARE_CPUPOWER			\
 				| 0*SD_POWERSAVINGS_BALANCE		\
-- 
cgit v1.2.3


From f0adb134d8dc9993a9998dc50845ec4f6ff4fadc Mon Sep 17 00:00:00 2001
From: Kurt Roeckx <kurt@roeckx.be>
Date: Wed, 16 Sep 2009 11:09:32 -0400
Subject: [CPUFREQ] Fix NULL ptr regression in powernow-k8

Fixes bugzilla #13780

From: Kurt Roeckx <kurt@roeckx.be>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 0cbce0481a5..6394aa5c798 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -605,9 +605,10 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
 	return 0;
 }
 
-static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry)
+static void invalidate_entry(struct cpufreq_frequency_table *powernow_table,
+		unsigned int entry)
 {
-	data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
 }
 
 static void print_basics(struct powernow_k8_data *data)
@@ -915,13 +916,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 					"bad value %d.\n", i, index);
 			printk(KERN_ERR PFX "Please report to BIOS "
 					"manufacturer\n");
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
 		if (!(hi & HW_PSTATE_VALID_MASK)) {
 			dprintk("invalid pstate %d, ignoring\n", index);
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 
@@ -970,7 +971,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		/* verify frequency is OK */
 		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
 			dprintk("invalid freq %u kHz, ignoring\n", freq);
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 
@@ -978,7 +979,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 		 * BIOSs are using "off" to indicate invalid */
 		if (vid == VID_OFF) {
 			dprintk("invalid vid %u, ignoring\n", vid);
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 
@@ -988,7 +989,7 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
 				(unsigned int)
 				(data->acpi_data.states[i].core_frequency
 				 * 1000));
-			invalidate_entry(data, i);
+			invalidate_entry(powernow_table, i);
 			continue;
 		}
 	}
-- 
cgit v1.2.3


From ab8e8df87421574fe053bf1770353af5b24a2bbb Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 11:53:18 -0400
Subject: davinci: DM644x platform changes for vpfe capture

DM644x platform and board setup

This adds platform and board setup changes required to support
vpfe capture driver on DM644x

Tested video capture on DM6446 with tvp514x driver

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm644x-evm.c    | 74 +++++++++++++++++++++++++++--
 arch/arm/mach-davinci/dm644x.c              | 56 ++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/dm644x.h |  2 +
 3 files changed, 129 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 31cf84fbb01..1213a0087ad 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -28,6 +28,9 @@
 #include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+
+#include <media/tvp514x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -194,6 +197,72 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM6446 EVM",
+	.ccdc = "DM6446 CCDC",
+};
+
 static struct platform_device rtc_dev = {
 	.name           = "rtc_davinci_evm",
 	.id             = -1,
@@ -562,9 +631,6 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),
 	},
-	/* ALSO:
-	 * - tvp5146 video decoder (0x5d)
-	 */
 };
 
 /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
@@ -594,6 +660,8 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm644x_set_vpfe_config(&vpfe_cfg);
 	dm644x_init();
 }
 
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index e554aa6c9a8..d6e0fa5a8d8 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -580,6 +580,59 @@ static struct platform_device dm644x_asp_device = {
 	.resource	= dm644x_asp_resources,
 };
 
+static struct resource dm644x_vpss_resources[] = {
+	{
+		/* VPSS Base address */
+		.name		= "vpss",
+		.start          = 0x01c73400,
+		.end            = 0x01c73400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm644x_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm644x_vpss",
+	.num_resources		= ARRAY_SIZE(dm644x_vpss_resources),
+	.resource		= dm644x_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = 0x01c70400,
+		.end            = 0x01c70400 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm644x_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm644x_io_desc[] = {
@@ -715,6 +768,9 @@ static int __init dm644x_init_devices(void)
 
 	platform_device_register(&dm644x_edma_device);
 	platform_device_register(&dm644x_emac_device);
+	platform_device_register(&dm644x_vpss_device);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 8b157ceec0c..0efb73852c2 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -26,6 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -36,5 +37,6 @@
 
 void __init dm644x_init(void);
 void __init dm644x_init_asp(struct snd_platform_data *pdata);
+void dm644x_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM644X_H */
-- 
cgit v1.2.3


From 51e68e27d310034332b67a6762914af9589b3db5 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 12:02:50 -0400
Subject: davinci: DM355 - platform changes for vpfe capture

DM355 platform and board setup

This has platform and board setup changes to support vpfe capture
driver for DM355 EVMs.

Tested video capture on DM355 using tvp514x

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c    | 76 +++++++++++++++++++++++++--
 arch/arm/mach-davinci/dm355.c              | 83 ++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/dm355.h |  2 +
 arch/arm/mach-davinci/include/mach/mux.h   |  9 ++++
 4 files changed, 167 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 9f25fd8ca4a..77e80679882 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
@@ -136,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
 }
 
 static struct i2c_board_info dm355evm_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
 		.platform_data = dm355evm_mmcsd_gpios,
-		/* plus irq */ },
+	},
+	/* { plus irq  }, */
 	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
 };
 
 static void __init evm_init_i2c(void)
@@ -179,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = {
 	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	}
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM355 EVM",
+	.ccdc = "DM355 CCDC",
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&dm355evm_dm9000,
 	&davinci_nand_device,
@@ -190,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 4f42169c029..059670018af 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -488,6 +488,14 @@ MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
 MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
 MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
 MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
+
+MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
+MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
+MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
 #endif
 };
 
@@ -659,6 +667,67 @@ static struct platform_device dm355_asp1_device = {
 	.resource	= dm355_asp1_resources,
 };
 
+static struct resource dm355_vpss_resources[] = {
+	{
+		/* VPSS BL Base address */
+		.name		= "vpss",
+		.start          = 0x01c70800,
+		.end            = 0x01c70800 + 0xff,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		/* VPSS CLK Base address */
+		.name		= "vpss",
+		.start          = 0x01c70000,
+		.end            = 0x01c70000 + 0xf,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm355_vpss_device = {
+	.name			= "vpss",
+	.id			= -1,
+	.dev.platform_data	= "dm355_vpss",
+	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
+	.resource		= dm355_vpss_resources,
+};
+
+static struct resource vpfe_resources[] = {
+	{
+		.start          = IRQ_VDINT0,
+		.end            = IRQ_VDINT0,
+		.flags          = IORESOURCE_IRQ,
+	},
+	{
+		.start          = IRQ_VDINT1,
+		.end            = IRQ_VDINT1,
+		.flags          = IORESOURCE_IRQ,
+	},
+	/* CCDC Base address */
+	{
+		.flags          = IORESOURCE_MEM,
+		.start          = 0x01c70600,
+		.end            = 0x01c70600 + 0x1ff,
+	},
+};
+
+static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device vpfe_capture_dev = {
+	.name		= CAPTURE_DRV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpfe_resources),
+	.resource	= vpfe_resources,
+	.dev = {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void dm355_set_vpfe_config(struct vpfe_config *cfg)
+{
+	vpfe_capture_dev.dev.platform_data = cfg;
+}
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -792,6 +861,20 @@ static int __init dm355_init_devices(void)
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
+	platform_device_register(&dm355_vpss_device);
+	/*
+	 * setup Mux configuration for vpfe input and register
+	 * vpfe capture platform device
+	 */
+	davinci_cfg_reg(DM355_VIN_PCLK);
+	davinci_cfg_reg(DM355_VIN_CAM_WEN);
+	davinci_cfg_reg(DM355_VIN_CAM_VD);
+	davinci_cfg_reg(DM355_VIN_CAM_HD);
+	davinci_cfg_reg(DM355_VIN_YIN_EN);
+	davinci_cfg_reg(DM355_VIN_CINL_EN);
+	davinci_cfg_reg(DM355_VIN_CINH_EN);
+	platform_device_register(&vpfe_capture_dev);
+
 	return 0;
 }
 postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h
index 03faaef95a9..85536d8e833 100644
--- a/arch/arm/mach-davinci/include/mach/dm355.h
+++ b/arch/arm/mach-davinci/include/mach/dm355.h
@@ -13,6 +13,7 @@
 
 #include <mach/hardware.h>
 #include <mach/asp.h>
+#include <media/davinci/vpfe_capture.h>
 
 #define ASP1_TX_EVT_EN	1
 #define ASP1_RX_EVT_EN	2
@@ -23,5 +24,6 @@ void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		struct spi_board_info *info, unsigned len);
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
+void dm355_set_vpfe_config(struct vpfe_config *cfg);
 
 #endif /* __ASM_ARCH_DM355_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 773283281be..bb84893a4e8 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -161,6 +161,15 @@ enum davinci_dm355_index {
 	DM355_VOUT_HVSYNC,
 	DM355_VOUT_COUTL_EN,
 	DM355_VOUT_COUTH_EN,
+
+	/* Video In Pin Mux */
+	DM355_VIN_PCLK,
+	DM355_VIN_CAM_WEN,
+	DM355_VIN_CAM_VD,
+	DM355_VIN_CAM_HD,
+	DM355_VIN_YIN_EN,
+	DM355_VIN_CINL_EN,
+	DM355_VIN_CINH_EN,
 };
 
 enum davinci_dm365_index {
-- 
cgit v1.2.3


From 85609c1ccda64af7d7c277469183f20e4f3b69c3 Mon Sep 17 00:00:00 2001
From: Muralidharan Karicheri <m-karicheri2@ti.com>
Date: Wed, 16 Sep 2009 13:15:30 -0400
Subject: DaVinci: DM646x - platform changes for vpif capture and display
 drivers

VPIF display changes (Chaithrika)

Add platform device and resource structures. Also define a platform specific
clock setup function that can be accessed by the driver to configure the clock
and CPLD.

VPIF caputure changes (Murali)

1) Modify vpif_subdev_info to add board_info, routing information and
   vpif interface configuration. Remove addr since it is part of
   board_info

2) Add code to setup channel mode and input decoder path for vpif
   capture driver

Also incorporated comments against version v0 of the patch series and
added a spinlock to protect writes to common registers

Tested on DM6467 on channel 0 using TVP514x. Following bootargs used
for drivers:

   vpif_capture.ch0_bufsize=829440 vpif_display.ch2_bufsize=829440

Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm646x-evm.c    | 319 +++++++++++++++++++++++++++-
 arch/arm/mach-davinci/dm646x.c              | 104 +++++++++
 arch/arm/mach-davinci/include/mach/dm646x.h |  59 +++++
 3 files changed, 481 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 20547049b48..24e0e13b149 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -34,6 +34,8 @@
 #include <linux/i2c/pcf857x.h>
 #include <linux/etherdevice.h>
 
+#include <media/tvp514x.h>
+
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -62,6 +64,30 @@
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+#define VIDCLKCTL_OFFSET	(DAVINCI_SYSTEM_MODULE_BASE + 0x38)
+#define VSCLKDIS_OFFSET		(DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
+#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8		(BIT(9))
+#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
+#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8		(BIT(13))
+#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
+
+#define VIDCH2CLK		(BIT(10))
+#define VIDCH3CLK		(BIT(11))
+#define VIDCH1CLK		(BIT(4))
+#define TVP7002_INPUT		(BIT(4))
+#define TVP5147_INPUT		(~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
+#define TVP5147_CH0		"tvp514x-0"
+#define TVP5147_CH1		"tvp514x-1"
+
+static void __iomem *vpif_vidclkctl_reg;
+static void __iomem *vpif_vsclkdis_reg;
+/* spin lock for updating above registers */
+static spinlock_t vpif_reg_lock;
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
@@ -287,6 +313,40 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 	},
 };
 
+static struct i2c_client *cpld_client;
+
+static int cpld_video_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	cpld_client = client;
+	return 0;
+}
+
+static int __devexit cpld_video_remove(struct i2c_client *client)
+{
+	cpld_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id cpld_video_id[] = {
+	{ "cpld_video", 0 },
+	{ }
+};
+
+static struct i2c_driver cpld_video_driver = {
+	.driver = {
+		.name	= "cpld_video",
+	},
+	.probe		= cpld_video_probe,
+	.remove		= cpld_video_remove,
+	.id_table	= cpld_video_id,
+};
+
+static void evm_init_cpld(void)
+{
+	i2c_add_driver(&cpld_video_driver);
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -301,7 +361,10 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x18),
-	}
+	},
+	{
+		I2C_BOARD_INFO("cpld_video", 0x3b),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -309,11 +372,265 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay      = 0 /* usec */,
 };
 
+static int set_vpif_clock(int mux_mode, int hd)
+{
+	unsigned long flags;
+	unsigned int value;
+	int val = 0;
+	int err = 0;
+
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	/* disable the clock */
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	value |= (VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (mux_mode == 1)
+		val &= ~0x40;
+	else
+		val |= 0x40;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	value = __raw_readl(vpif_vidclkctl_reg);
+	value &= ~(VCH2CLK_MASK);
+	value &= ~(VCH3CLK_MASK);
+
+	if (hd >= 1)
+		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
+	else
+		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
+
+	__raw_writel(value, vpif_vidclkctl_reg);
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	/* enable the clock */
+	value &= ~(VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	return 0;
+}
+
+static struct vpif_subdev_info dm646x_vpif_subdev[] = {
+	{
+		.name	= "adv7343",
+		.board_info = {
+			I2C_BOARD_INFO("adv7343", 0x2a),
+		},
+	},
+	{
+		.name	= "ths7303",
+		.board_info = {
+			I2C_BOARD_INFO("ths7303", 0x2c),
+		},
+	},
+};
+
+static const char *output[] = {
+	"Composite",
+	"Component",
+	"S-Video",
+};
+
+static struct vpif_display_config dm646x_vpif_display_config = {
+	.set_clock	= set_vpif_clock,
+	.subdevinfo	= dm646x_vpif_subdev,
+	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
+	.output		= output,
+	.output_count	= ARRAY_SIZE(output),
+	.card_name	= "DM646x EVM",
+};
+
+/**
+ * setup_vpif_input_path()
+ * @channel: channel id (0 - CH0, 1 - CH1)
+ * @sub_dev_name: ptr sub device name
+ *
+ * This will set vpif input to capture data from tvp514x or
+ * tvp7002.
+ */
+static int setup_vpif_input_path(int channel, const char *sub_dev_name)
+{
+	int err = 0;
+	int val;
+
+	/* for channel 1, we don't do anything */
+	if (channel != 0)
+		return 0;
+
+	if (!cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
+	    !strcmp(sub_dev_name, TVP5147_CH1))
+		val &= TVP5147_INPUT;
+	else
+		val |= TVP7002_INPUT;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+	return 0;
+}
+
+/**
+ * setup_vpif_input_channel_mode()
+ * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
+ *
+ * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
+ */
+static int setup_vpif_input_channel_mode(int mux_mode)
+{
+	unsigned long flags;
+	int err = 0;
+	int val;
+	u32 value;
+
+	if (!vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	if (mux_mode) {
+		val &= VPIF_INPUT_TWO_CHANNEL;
+		value |= VIDCH1CLK;
+	} else {
+		val |= VPIF_INPUT_ONE_CHANNEL;
+		value &= ~VIDCH1CLK;
+	}
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static struct vpif_subdev_info vpif_capture_sdev_info[] = {
+	{
+		.name	= TVP5147_CH0,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+	{
+		.name	= TVP5147_CH1,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5c),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+};
+
+static const struct vpif_input dm6467_ch0_inputs[] = {
+	{
+		.input = {
+			.index = 0,
+			.name = "Composite",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH0,
+	},
+};
+
+static const struct vpif_input dm6467_ch1_inputs[] = {
+       {
+		.input = {
+			.index = 0,
+			.name = "S-Video",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH1,
+	},
+};
+
+static struct vpif_capture_config dm646x_vpif_capture_cfg = {
+	.setup_input_path = setup_vpif_input_path,
+	.setup_input_channel_mode = setup_vpif_input_channel_mode,
+	.subdev_info = vpif_capture_sdev_info,
+	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+	.chan_config[0] = {
+		.inputs = dm6467_ch0_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
+	},
+	.chan_config[1] = {
+		.inputs = dm6467_ch1_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
+	},
+};
+
+static void __init evm_init_video(void)
+{
+	vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4);
+	vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4);
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) {
+		pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n");
+		return;
+	}
+	spin_lock_init(&vpif_reg_lock);
+
+	dm646x_setup_vpif(&dm646x_vpif_display_config,
+			  &dm646x_vpif_capture_cfg);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
 	i2c_add_driver(&dm6467evm_cpld_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+	evm_init_cpld();
+	evm_init_video();
 }
 
 static void __init davinci_map_io(void)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 8fa28039f27..0976049c7b3 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -32,6 +32,15 @@
 #include "clock.h"
 #include "mux.h"
 
+#define DAVINCI_VPIF_BASE       (0x01C12000)
+#define VDD3P3V_PWDN_OFFSET	(0x48)
+#define VSCLKDIS_OFFSET		(0x6C)
+
+#define VDD3P3V_VID_MASK	(BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
+					BIT_MASK(0))
+#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
+					BIT_MASK(8))
+
 /*
  * Device specific clocks
  */
@@ -686,6 +695,75 @@ static struct platform_device dm646x_dit_device = {
 	.id	= -1,
 };
 
+static u64 vpif_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource vpif_resource[] = {
+	{
+		.start	= DAVINCI_VPIF_BASE,
+		.end	= DAVINCI_VPIF_BASE + 0x03ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device vpif_dev = {
+	.name		= "vpif",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_resource,
+	.num_resources	= ARRAY_SIZE(vpif_resource),
+};
+
+static struct resource vpif_display_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT2,
+		.end   = IRQ_DM646X_VP_VERTINT2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT3,
+		.end   = IRQ_DM646X_VP_VERTINT3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_display_dev = {
+	.name		= "vpif_display",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_display_resource,
+	.num_resources	= ARRAY_SIZE(vpif_display_resource),
+};
+
+static struct resource vpif_capture_resource[] = {
+	{
+		.start = IRQ_DM646X_VP_VERTINT0,
+		.end   = IRQ_DM646X_VP_VERTINT0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT1,
+		.end   = IRQ_DM646X_VP_VERTINT1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_capture_dev = {
+	.name		= "vpif_capture",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= vpif_capture_resource,
+	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -814,6 +892,32 @@ void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
 	platform_device_register(&dm646x_dit_device);
 }
 
+void dm646x_setup_vpif(struct vpif_display_config *display_config,
+		       struct vpif_capture_config *capture_config)
+{
+	unsigned int value;
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+	value = __raw_readl(base + VSCLKDIS_OFFSET);
+	value &= ~VSCLKDIS_MASK;
+	__raw_writel(value, base + VSCLKDIS_OFFSET);
+
+	value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
+	value &= ~VDD3P3V_VID_MASK;
+	__raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
+
+	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
+
+	vpif_display_dev.dev.platform_data = display_config;
+	vpif_capture_dev.dev.platform_data = capture_config;
+	platform_device_register(&vpif_dev);
+	platform_device_register(&vpif_display_dev);
+	platform_device_register(&vpif_capture_dev);
+}
+
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index feb1e02cdbd..8cec746ae9d 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -14,6 +14,8 @@
 #include <mach/hardware.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
@@ -29,4 +31,61 @@ void __init dm646x_init_ide(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 
+void dm646x_video_init(void);
+
+enum vpif_if_type {
+	VPIF_IF_BT656,
+	VPIF_IF_BT1120,
+	VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+	enum vpif_if_type if_type;
+	unsigned hd_pol:1;
+	unsigned vd_pol:1;
+	unsigned fid_pol:1;
+};
+
+struct vpif_subdev_info {
+	const char *name;
+	struct i2c_board_info board_info;
+	u32 input;
+	u32 output;
+	unsigned can_route:1;
+	struct vpif_interface vpif_if;
+};
+
+struct vpif_display_config {
+	int (*set_clock)(int, int);
+	struct vpif_subdev_info *subdevinfo;
+	int subdev_count;
+	const char **output;
+	int output_count;
+	const char *card_name;
+};
+
+struct vpif_input {
+	struct v4l2_input input;
+	const char *subdev_name;
+};
+
+#define VPIF_CAPTURE_MAX_CHANNELS	2
+
+struct vpif_capture_chan_config {
+	const struct vpif_input *inputs;
+	int input_count;
+};
+
+struct vpif_capture_config {
+	int (*setup_input_channel_mode)(int);
+	int (*setup_input_path)(int, const char *);
+	struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+	struct vpif_subdev_info *subdev_info;
+	int subdev_count;
+	const char *card_name;
+};
+
+void dm646x_setup_vpif(struct vpif_display_config *,
+		       struct vpif_capture_config *);
+
 #endif /* __ASM_ARCH_DM646X_H */
-- 
cgit v1.2.3


From f4c3f03838ae47a92f2d15d48ddf68deae5d7ebb Mon Sep 17 00:00:00 2001
From: Anirban Sinha <asinha@zeugmasystems.com>
Date: Wed, 16 Sep 2009 10:16:18 -0700
Subject: Fix ia64 build breakage in head.S

The "cleanup console_print()" patch in commit
353f6dd2dec992ddd34620a94b051b0f76227379 introduced an "extern"
declaration into an assembly language file.  Remove it.

Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/kernel/head.S | 1 -
 arch/ia64/kernel/head.h | 1 -
 2 files changed, 2 deletions(-)
 delete mode 100644 arch/ia64/kernel/head.h

(limited to 'arch')

diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index e6c5c3d5e1f..23f846de62d 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -34,7 +34,6 @@
 #include <asm/mca_asm.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
-#include "head.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET				\
diff --git a/arch/ia64/kernel/head.h b/arch/ia64/kernel/head.h
deleted file mode 100644
index 2e2ac6824e6..00000000000
--- a/arch/ia64/kernel/head.h
+++ /dev/null
@@ -1 +0,0 @@
-extern void console_print(const char *s);
-- 
cgit v1.2.3


From f39d56ec469a9ade221ceeb85a37b051374f616b Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 2 Dec 2008 14:08:58 +0000
Subject: Blackfin: bf537-stamp: update ADP5588 header name

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index bd656907b8c..b8e8c92f6b9 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1089,7 +1089,7 @@ static struct platform_device i2c_bfin_twi_device = {
 
 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
 #include <linux/input.h>
-#include <linux/i2c/adp5588_keys.h>
+#include <linux/i2c/adp5588.h>
 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
 	[0]	 = KEY_GRAVE,
 	[1]	 = KEY_1,
-- 
cgit v1.2.3


From e68d1ebc30e033612bb69f949da654d72beae57d Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Wed, 3 Jun 2009 09:46:22 +0000
Subject: Blackfin: bf537-stamp: declare SPI IRQ resources

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/bfin5xx_spi.h | 1 +
 arch/blackfin/mach-bf537/boards/stamp.c | 6 ++++++
 2 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index aaeb4df10d5..c281c632827 100644
--- a/arch/blackfin/include/asm/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -127,6 +127,7 @@ struct bfin5xx_spi_chip {
 	u32 cs_gpio;
 	/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
 	u16 idle_tx_val;
+	u8 pio_interrupt; /* Enable spi data irq */
 };
 
 #endif /* _SPI_CHANNEL_H_ */
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index b8e8c92f6b9..d619313b1a7 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -555,6 +555,7 @@ static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 8,
+	.pio_interrupt = 0,
 };
 #endif
 
@@ -864,6 +865,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI,
 		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
 		.flags = IORESOURCE_IRQ,
 	},
 };
-- 
cgit v1.2.3


From d4b834c13940b5433d16ae3605794b3d74804348 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 4 Jun 2009 10:14:17 +0000
Subject: Blackfin: bf537-stamp: add resources for AD1938 audio card

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d619313b1a7..b9da9790a44 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -524,6 +524,15 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+	.cs_gpio = GPIO_PF5,
+};
+#endif
+
 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 	.enable_dma = 0,
@@ -754,6 +763,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+	{
+		.modalias = "ad1938-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.controller_data = &ad1938_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 	{
 		.modalias = "ad9960-spi",
-- 
cgit v1.2.3


From ae4f073c40bf677b03826262e6022b4a251fe437 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Mon, 22 Jun 2009 02:02:16 +0000
Subject: Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4]

We handle many exceptions at EVT5 (hardware error level) so that we can
catch exceptions in our exception handling code.  Today - if the global
interrupt enable bit (IPEND[4]) is set (interrupts disabled) our trap
handling code goes into a infinite loop, since we need interrupts to be
on to defer things to EVT5.

Normal kernel code should not trigger this for any reason as IPEND[4] gets
cleared early (when doing an interrupt context save) and the kernel stack
there should be sane (or something much worse is happening in the system).
But there have been a few times where this has happened, so this change
makes sure we dump a proper crash message even when things have gone south.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/pda.h    |  1 +
 arch/blackfin/kernel/asm-offsets.c |  1 +
 arch/blackfin/kernel/traps.c       | 19 +++++----
 arch/blackfin/mach-common/entry.S  | 86 ++++++++++++++++++++++++--------------
 4 files changed, 66 insertions(+), 41 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index b42555c1431..69b96b40c18 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -50,6 +50,7 @@ struct blackfin_pda {			/* Per-processor Data Area */
 	unsigned long ex_optr;
 	unsigned long ex_buf[4];
 	unsigned long ex_imask;		/* Saved imask from exception */
+	unsigned long ex_ipend;		/* Saved IPEND from exception */
 	unsigned long *ex_stack;	/* Exception stack space */
 
 #ifdef ANOMALY_05000261
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index b5df9459d6d..8ad4f2c6996 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -145,6 +145,7 @@ int main(void)
 	DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf));
 	DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask));
 	DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack));
+	DEFINE(PDA_EXIPEND, offsetof(struct blackfin_pda, ex_ipend));
 #ifdef ANOMALY_05000261
 	DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx));
 #endif
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index bf2b2d1f8ae..fccf741ed3b 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -267,11 +267,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	 * double faults if the stack has become corrupt
 	 */
 
-#ifndef CONFIG_KGDB
-	/* IPEND is skipped if KGDB isn't enabled (see entry code) */
-	fp->ipend = bfin_read_IPEND();
-#endif
-
 	/* trap_c() will be called for exceptions. During exceptions
 	 * processing, the pc value should be set with retx value.
 	 * With this change we can cleanup some code in signal.c- TODO
@@ -1116,10 +1111,16 @@ void show_regs(struct pt_regs *fp)
 
 	verbose_printk(KERN_NOTICE "%s", linux_banner);
 
-	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
-		       print_tainted());
-	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  SYSCFG: %04lx\n",
-		       (long)fp->seqstat, fp->ipend, fp->syscfg);
+	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
+	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
+		(long)fp->seqstat, fp->ipend, cpu_pda[smp_processor_id()].ex_imask, fp->syscfg);
+	if (fp->ipend & EVT_IRPTEN)
+		verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
+	if (!(cpu_pda[smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
+			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
+		verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
+	if (!(cpu_pda[smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
+		verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
 			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index fb1795d5be2..4c07fcb356a 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -301,25 +301,31 @@ ENTRY(_ex_replaceable)
 	nop;
 
 ENTRY(_ex_trap_c)
+	/* The only thing that has been saved in this context is
+	 * (R7:6,P5:4), ASTAT & SP - don't use anything else
+	 */
+
+	GET_PDA(p5, r6);
+
 	/* Make sure we are not in a double fault */
 	p4.l = lo(IPEND);
 	p4.h = hi(IPEND);
 	r7 = [p4];
 	CC = BITTST (r7, 5);
 	if CC jump _double_fault;
+	[p5 + PDA_EXIPEND] = r7;
 
 	/* Call C code (trap_c) to handle the exception, which most
 	 * likely involves sending a signal to the current process.
 	 * To avoid double faults, lower our priority to IRQ5 first.
 	 */
-	P5.h = _exception_to_level5;
-	P5.l = _exception_to_level5;
+	r7.h = _exception_to_level5;
+	r7.l = _exception_to_level5;
 	p4.l = lo(EVT5);
 	p4.h = hi(EVT5);
-	[p4] = p5;
+	[p4] = r7;
 	csync;
 
-	GET_PDA(p5, r6);
 #ifndef CONFIG_DEBUG_DOUBLEFAULT
 
 	/*
@@ -349,8 +355,7 @@ ENTRY(_ex_trap_c)
 	BITCLR(r6, SYSCFG_SSSTEP_P);
 	SYSCFG = r6;
 
-	/* Disable all interrupts, but make sure level 5 is enabled so
-	 * we can switch to that level.  Save the old mask.  */
+	/* Save the current IMASK, since we change in order to jump to level 5 */
 	cli r6;
 	[p5 + PDA_EXIMASK] = r6;
 
@@ -358,9 +363,21 @@ ENTRY(_ex_trap_c)
 	p4.h = hi(SAFE_USER_INSTRUCTION);
 	retx = p4;
 
+	/* Disable all interrupts, but make sure level 5 is enabled so
+	 * we can switch to that level.
+	 */
 	r6 = 0x3f;
 	sti r6;
 
+	/* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
+	 * clear it (re-enabling interrupts again) by the special sequence of pushing
+	 * RETI onto the stack.  This way we can lower ourselves to IVG5 even if the
+	 * exception was taken after the interrupt handler was called but before it
+	 * got a chance to enable global interrupts itself.
+	 */
+	[--sp] = reti;
+	sp += 4;
+
 	raise 5;
 	jump.s _bfin_return_from_exception;
 ENDPROC(_ex_trap_c)
@@ -420,47 +437,52 @@ ENDPROC(_double_fault)
 ENTRY(_exception_to_level5)
 	SAVE_ALL_SYS
 
-	GET_PDA(p4, r7);        /* Fetch current PDA */
-	r6 = [p4 + PDA_RETX];
+	GET_PDA(p5, r7);        /* Fetch current PDA */
+	r6 = [p5 + PDA_RETX];
 	[sp + PT_PC] = r6;
 
-	r6 = [p4 + PDA_SYSCFG];
+	r6 = [p5 + PDA_SYSCFG];
 	[sp + PT_SYSCFG] = r6;
 
-	/* Restore interrupt mask.  We haven't pushed RETI, so this
-	 * doesn't enable interrupts until we return from this handler.  */
-	r6 = [p4 + PDA_EXIMASK];
-	sti r6;
-
 	/* Restore the hardware error vector.  */
-	P5.h = _evt_ivhw;
-	P5.l = _evt_ivhw;
+	r7.h = _evt_ivhw;
+	r7.l = _evt_ivhw;
 	p4.l = lo(EVT5);
 	p4.h = hi(EVT5);
-	[p4] = p5;
+	[p4] = r7;
 	csync;
 
-	p2.l = lo(IPEND);
-	p2.h = hi(IPEND);
-	csync;
-	r0 = [p2];              /* Read current IPEND */
-	[sp + PT_IPEND] = r0;   /* Store IPEND */
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	/* Now that we have the hardware error vector programmed properly
+	 * we can re-enable interrupts (IPEND[4]), so if the _trap_c causes
+	 * another hardware error, we can catch it (self-nesting).
+	 */
+	[--sp] = reti;
+	sp += 4;
+#endif
+
+	r7 = [p5 + PDA_EXIPEND]	/* Read the IPEND from the Exception state */
+	[sp + PT_IPEND] = r7;   /* Store IPEND onto the stack */
 
 	r0 = sp; 	/* stack frame pt_regs pointer argument ==> r0 */
 	SP += -12;
 	call _trap_c;
 	SP += 12;
 
-#ifdef CONFIG_DEBUG_DOUBLEFAULT
-	/* Grab ILAT */
-	p2.l = lo(ILAT);
-	p2.h = hi(ILAT);
-	r0 = [p2];
-	r1 = 0x20;  /* Did I just cause anther HW error? */
-	r0 = r0 & r1;
-	CC = R0 == R1;
-	if CC JUMP _double_fault;
-#endif
+	/* If interrupts were off during the exception (IPEND[4] = 1), turn them off
+	 * before we return.
+	 */
+	CC = BITTST(r7, EVT_IRPTEN_P)
+	if !CC jump 1f;
+	/* this will load a random value into the reti register - but that is OK,
+	 * since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro
+	 */
+	sp += -4;
+	reti = [sp++];
+1:
+	/* restore the interrupt mask (IMASK) */
+	r6 = [p5 + PDA_EXIMASK];
+	sti r6;
 
 	call _ret_from_exception;
 	RESTORE_ALL_SYS
-- 
cgit v1.2.3


From d8ca63955a81fd443016ef8813f8e6fd8dea7de4 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:22:25 +0200
Subject: Blackfin: checkpatch --file arch/blackfin/kernel/ipipe.c

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/ipipe.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index b8d22034b9a..a7256775fb9 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -30,10 +30,10 @@
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/kthread.h>
-#include <asm/unistd.h>
+#include <linux/unistd.h>
+#include <linux/io.h>
 #include <asm/system.h>
 #include <asm/atomic.h>
-#include <asm/io.h>
 
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
@@ -90,6 +90,7 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
 	struct ipipe_domain *this_domain, *next_domain;
 	struct list_head *head, *pos;
+	struct ipipe_irqdesc *idesc;
 	int m_ack, s = -1;
 
 	/*
@@ -100,17 +101,20 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
 	this_domain = __ipipe_current_domain;
+	idesc = &this_domain->irqs[irq];
 
-	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
+	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &idesc->control)))
 		head = &this_domain->p_link;
 	else {
 		head = __ipipe_pipeline.next;
 		next_domain = list_entry(head, struct ipipe_domain, p_link);
-		if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
-			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+		idesc = &next_domain->irqs[irq];
+		if (likely(test_bit(IPIPE_WIRED_FLAG, &idesc->control))) {
+			if (!m_ack && idesc->acknowledge != NULL)
+				idesc->acknowledge(irq, irq_to_desc(irq));
 			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
-				s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
+				s = __test_and_set_bit(IPIPE_STALL_FLAG,
+						       &p->status);
 			__ipipe_dispatch_wired(next_domain, irq);
 			goto out;
 		}
@@ -121,14 +125,15 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 	pos = head;
 	while (pos != &__ipipe_pipeline) {
 		next_domain = list_entry(pos, struct ipipe_domain, p_link);
-		if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
+		idesc = &next_domain->irqs[irq];
+		if (test_bit(IPIPE_HANDLE_FLAG, &idesc->control)) {
 			__ipipe_set_irq_pending(next_domain, irq);
-			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+			if (!m_ack && idesc->acknowledge != NULL) {
+				idesc->acknowledge(irq, irq_to_desc(irq));
 				m_ack = 1;
 			}
 		}
-		if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
+		if (!test_bit(IPIPE_PASS_FLAG, &idesc->control))
 			break;
 		pos = next_domain->p_link.next;
 	}
@@ -333,12 +338,9 @@ asmlinkage void __ipipe_sync_root(void)
 
 void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	if (__ipipe_root_domain_p) {
-		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
-			return;
-	}
+	if (__ipipe_root_domain_p &&
+	    test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+		return;
 
 	__ipipe_sync_stage(syncmask);
 }
-
-EXPORT_SYMBOL(show_stack);
-- 
cgit v1.2.3


From b9c7eb498ddce1f77536707398b6175696570e80 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:22:48 +0200
Subject: Blackfin: fix misnomer of some I-pipe helpers

__ipipe_{stall, unstall}_root_raw() identifiers may leave the reader
under the impression that only the virtual state is affected by these
operations, which is wrong. Pick names following the convention used
throughout the interrupt pipeline code.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/ipipe.h |  7 -------
 arch/blackfin/kernel/ipipe.c      | 44 ++++++++++++++++++---------------------
 arch/blackfin/lib/ins.S           |  4 ++--
 3 files changed, 22 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 87ba9ad399c..4617ba66278 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -145,10 +145,6 @@ void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-void __ipipe_stall_root_raw(void);
-
-void __ipipe_unstall_root_raw(void);
-
 void __ipipe_serial_debug(const char *fmt, ...);
 
 asmlinkage void __ipipe_call_irqtail(unsigned long addr);
@@ -234,9 +230,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 #define task_hijacked(p)		0
 #define ipipe_trap_notify(t, r)  	0
 
-#define __ipipe_stall_root_raw()	do { } while (0)
-#define __ipipe_unstall_root_raw()	do { } while (0)
-
 #define ipipe_init_irq_threads()		do { } while (0)
 #define ipipe_start_irq_thread(irq, desc)	0
 
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index a7256775fb9..be4f24ebd40 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -191,30 +191,6 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 }
 EXPORT_SYMBOL(__ipipe_disable_irqdesc);
 
-void __ipipe_stall_root_raw(void)
-{
-	/*
-	 * This code is called by the ins{bwl} routines (see
-	 * arch/blackfin/lib/ins.S), which are heavily used by the
-	 * network stack. It masks all interrupts but those handled by
-	 * non-root domains, so that we keep decent network transfer
-	 * rates for Linux without inducing pathological jitter for
-	 * the real-time domain.
-	 */
-	__asm__ __volatile__ ("sti %0;" : : "d"(__ipipe_irq_lvmask));
-
-	__set_bit(IPIPE_STALL_FLAG,
-		  &ipipe_root_cpudom_var(status));
-}
-
-void __ipipe_unstall_root_raw(void)
-{
-	__clear_bit(IPIPE_STALL_FLAG,
-		    &ipipe_root_cpudom_var(status));
-
-	__asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags));
-}
-
 int __ipipe_syscall_root(struct pt_regs *regs)
 {
 	struct ipipe_percpu_domain_data *p;
@@ -344,3 +320,23 @@ void ___ipipe_sync_pipeline(unsigned long syncmask)
 
 	__ipipe_sync_stage(syncmask);
 }
+
+void __ipipe_disable_root_irqs_hw(void)
+{
+	/*
+	 * This code is called by the ins{bwl} routines (see
+	 * arch/blackfin/lib/ins.S), which are heavily used by the
+	 * network stack. It masks all interrupts but those handled by
+	 * non-root domains, so that we keep decent network transfer
+	 * rates for Linux without inducing pathological jitter for
+	 * the real-time domain.
+	 */
+	bfin_sti(__ipipe_irq_lvmask);
+	__set_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+void __ipipe_enable_root_irqs_hw(void)
+{
+	__clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+	bfin_sti(bfin_irq_flags);
+}
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index 1863a6ba507..3edbd8db659 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -16,7 +16,7 @@
 	[--sp] = rets; \
 	[--sp] = (P5:0); \
 	sp += -12; \
-	call ___ipipe_stall_root_raw; \
+	call ___ipipe_disable_root_irqs_hw; \
 	sp += 12; \
 	(P5:0) = [sp++];
 # define CLI_INNER_NOP
@@ -28,7 +28,7 @@
 #ifdef CONFIG_IPIPE
 # define DO_STI \
 	sp += -12; \
-	call ___ipipe_unstall_root_raw; \
+	call ___ipipe_enable_root_irqs_hw; \
 	sp += 12; \
 2:	rets = [sp++];
 #else
-- 
cgit v1.2.3


From bc569f1a77199926be97ba6266dbea27768264df Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:23:12 +0200
Subject: Blackfin: export show_stack() to modules

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/traps.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index fccf741ed3b..599459749a5 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -944,6 +944,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	}
 #endif
 }
+EXPORT_SYMBOL(show_stack);
 
 void dump_stack(void)
 {
-- 
cgit v1.2.3


From 6b8019c85e18295466095a5778a14c1e9a067554 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:23:32 +0200
Subject: Blackfin: allow high priority domains to preempt schedule_tail()

ret_from_fork is always entered with hw interrupts off, which prevents
real-time domains to preempt the Linux kernel during part of the
initial context switch to the new task, which could in turn raise the
worst-case latency figures.

To avoid this, stall the root domain stage in the interrupt pipeline
to keep the scheduling tail code free from Linux-handled IRQs, then
enable hardware interrupts again.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/entry.S | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index a9cfba9946b..3f8769b7db5 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -43,8 +43,28 @@
 
 ENTRY(_ret_from_fork)
 #ifdef CONFIG_IPIPE
-	[--sp] = reti; 		/* IRQs on. */
-	SP += 4;
+	/*
+	 * Hw IRQs are off on entry, and we don't want the scheduling tail
+	 * code to starve high priority domains from interrupts while it
+	 * runs. Therefore we first stall the root stage to have the
+	 * virtual interrupt state reflect IMASK.
+	 */
+	p0.l = ___ipipe_root_status;
+	p0.h = ___ipipe_root_status;
+	r4 = [p0];
+	bitset(r4, 0);
+	[p0] = r4;
+	/*
+	 * Then we may enable hw IRQs, allowing preemption from high
+	 * priority domains. schedule_tail() will do local_irq_enable()
+	 * since Blackfin does not define __ARCH_WANT_UNLOCKED_CTXSW, so
+	 * there is no need to unstall the root domain by ourselves
+	 * afterwards.
+	 */
+	p0.l = _bfin_irq_flags;
+	p0.h = _bfin_irq_flags;
+	r4 = [p0];
+	sti r4;
 #endif /* CONFIG_IPIPE */
 	SP += -12;
 	call _schedule_tail;
-- 
cgit v1.2.3


From 9703a73c983edab860d6d145c87480440fc83348 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:23:48 +0200
Subject: Blackfin: use generic name for EVT14 handler

The purpose of the EVT14 handler may depend on whether CONFIG_IPIPE is
enabled, albeit its implementation can be the same in both cases. When
the interrupt pipeline is enabled, EVT14 can be used to raise the core
priority level for the running code; when CONFIG_IPIPE is off, EVT14
can be used to lower this level before running softirq handlers.

Rename evt14_softirq to evt_evt14 to pick an identifier that fits
both, which allows to reuse the same vector setup code as well.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/bfin-global.h   | 1 -
 arch/blackfin/include/asm/irq_handler.h   | 1 +
 arch/blackfin/mach-common/entry.S         | 8 ++++----
 arch/blackfin/mach-common/ints-priority.c | 2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index e39277ea43e..e6ecbe4f4d0 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -66,7 +66,6 @@ extern void program_IAR(void);
 
 extern asmlinkage void lower_to_irq14(void);
 extern asmlinkage void bfin_return_from_exception(void);
-extern asmlinkage void evt14_softirq(void);
 extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
 
diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
index 139b5208f9d..7d9e2d3bbed 100644
--- a/arch/blackfin/include/asm/irq_handler.h
+++ b/arch/blackfin/include/asm/irq_handler.h
@@ -17,6 +17,7 @@ asmlinkage void evt_evt10(void);
 asmlinkage void evt_evt11(void);
 asmlinkage void evt_evt12(void);
 asmlinkage void evt_evt13(void);
+asmlinkage void evt_evt14(void);
 asmlinkage void evt_soft_int1(void);
 asmlinkage void evt_system_call(void);
 asmlinkage void init_exception_buff(void);
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 4c07fcb356a..919f7aef077 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -975,10 +975,10 @@ ENTRY(_lower_to_irq14)
 #endif
 
 #ifdef CONFIG_DEBUG_HWERR
-	/* enable irq14 & hwerr interrupt, until we transition to _evt14_softirq */
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
 	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 #else
-	/* Only enable irq14 interrupt, until we transition to _evt14_softirq */
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
 	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 #endif
 	sti r0;
@@ -986,7 +986,7 @@ ENTRY(_lower_to_irq14)
 	rti;
 ENDPROC(_lower_to_irq14)
 
-ENTRY(_evt14_softirq)
+ENTRY(_evt_evt14)
 #ifdef CONFIG_DEBUG_HWERR
 	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
 	sti r0;
@@ -996,7 +996,7 @@ ENTRY(_evt14_softirq)
 	[--sp] = RETI;
 	SP += 4;
 	rts;
-ENDPROC(_evt14_softirq)
+ENDPROC(_evt_evt14)
 
 ENTRY(_schedule_and_signal_from_int)
 	/* To end up here, vector 15 was changed - so we have to change it
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index b42150190d0..4cc55bc4142 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -967,7 +967,7 @@ void __cpuinit init_exception_vectors(void)
 	bfin_write_EVT11(evt_evt11);
 	bfin_write_EVT12(evt_evt12);
 	bfin_write_EVT13(evt_evt13);
-	bfin_write_EVT14(evt14_softirq);
+	bfin_write_EVT14(evt_evt14);
 	bfin_write_EVT15(evt_system_call);
 	CSYNC();
 }
-- 
cgit v1.2.3


From fc9afb997f3e871d1c289258d59b48db30984950 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:24:02 +0200
Subject: Blackfin: reuse evt_evt14 handler to perform irqtail epilogue

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-common/interrupt.S | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 9c46680186e..ae7fc88ab6a 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -276,33 +276,11 @@ ENTRY(___ipipe_call_irqtail)
 	( r7:4, p5:3 ) = [sp++];
 	rets = [sp++];
 
-	[--sp] = reti;
-	reti = [sp++];          /* IRQs are off. */
-	r0.h = 3f;
-	r0.l = 3f;
-	p0.l = lo(EVT14);
-	p0.h = hi(EVT14);
-	[p0] = r0;
-	csync;
 	r0 = 0x401f (z);
 	sti r0;
-	raise 14;
-	[--sp] = reti;          /* IRQs on. */
+	raise 14;		/* Branches to _evt_evt14 */
 2:
 	jump 2b;                /* Likely paranoid. */
-3:
-	sp += 4;                /* Discard saved RETI */
-	r0.h = _evt14_softirq;
-	r0.l = _evt14_softirq;
-	p0.l = lo(EVT14);
-	p0.h = hi(EVT14);
-	[p0] = r0;
-	csync;
-	p0.l = _bfin_irq_flags;
-	p0.h = _bfin_irq_flags;
-	r0 = [p0];
-	sti r0;
-	rts;
 ENDPROC(___ipipe_call_irqtail)
 
 #endif /* CONFIG_IPIPE */
-- 
cgit v1.2.3


From 70f47202320623270f327e249df0121c09e45c09 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:24:18 +0200
Subject: Blackfin: allow EVT5 to preempt irqtail prologue (CONFIG_DEBUG_HWERR)

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-common/interrupt.S | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index ae7fc88ab6a..29fbf67f47f 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -276,7 +276,15 @@ ENTRY(___ipipe_call_irqtail)
 	( r7:4, p5:3 ) = [sp++];
 	rets = [sp++];
 
-	r0 = 0x401f (z);
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IVHW | \
+		EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | \
+		EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
 	sti r0;
 	raise 14;		/* Branches to _evt_evt14 */
 2:
-- 
cgit v1.2.3


From 7a7967dc1b606f8c88e33bbec773bf82b4a52e6e Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:25:52 +0200
Subject: Blackfin: document __ipipe_call_irqtail

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-common/interrupt.S | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 29fbf67f47f..c754ff74bd5 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -261,6 +261,31 @@ ENTRY(_evt_system_call)
 ENDPROC(_evt_system_call)
 
 #ifdef CONFIG_IPIPE
+/*
+ * __ipipe_call_irqtail: lowers the current priority level to EVT15
+ * before running a user-defined routine, then raises the priority
+ * level to EVT14 to prepare the caller for a normal interrupt
+ * return through RTI.
+ *
+ * We currently use this facility in two occasions:
+ *
+ * - to branch to __ipipe_irq_tail_hook as requested by a high
+ *   priority domain after the pipeline delivered an interrupt,
+ *   e.g. such as Xenomai, in order to start its rescheduling
+ *   procedure, since we may not switch tasks when IRQ levels are
+ *   nested on the Blackfin, so we have to fake an interrupt return
+ *   so that we may reschedule immediately.
+ *
+ * - to branch to sync_root_irqs, in order to play any interrupt
+ *   pending for the root domain (i.e. the Linux kernel). This lowers
+ *   the core priority level enough so that Linux IRQ handlers may
+ *   never delay interrupts handled by high priority domains; we defer
+ *   those handlers until this point instead. This is a substitute
+ *   to using a threaded interrupt model for the Linux kernel.
+ *
+ * r0: address of user-defined routine
+ * context: caller must have preempted EVT15, hw interrupts must be off.
+ */
 ENTRY(___ipipe_call_irqtail)
 	p0 = r0;
 	r0.l = 1f;
-- 
cgit v1.2.3


From 9ea7770fdb0d6742d6a0aba62facda4b35356cf2 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:26:07 +0200
Subject: Blackfin: sanitize manual control of IPEND[4]

Cleanup is performed in two ways:

- remove extraneous updates of IPEND[4] w/ CONFIG_IPIPE,
  and document remaining use.

- substitute pop-reg-from-stack instructions with plain SP fixups in
  all save-RETI-then-discard patterns.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-common/entry.S | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 919f7aef077..2c58b60ff13 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -708,8 +708,14 @@ ENTRY(_system_call)
 #ifdef CONFIG_IPIPE
 	cc = BITTST(r7, TIF_IRQ_SYNC);
 	if !cc jump .Lsyscall_no_irqsync;
+	/*
+	 * Clear IPEND[4] manually to undo what resume_userspace_1 just did;
+	 * we need this so that high priority domain interrupts may still
+	 * preempt the current domain while the pipeline log is being played
+	 * back.
+	 */
 	[--sp] = reti;
-	r0 = [sp++];
+	SP += 4; /* don't merge with next insn to keep the pattern obvious */
 	SP += -12;
 	call ___ipipe_sync_root;
 	SP += 12;
@@ -721,7 +727,7 @@ ENTRY(_system_call)
 
 	/* Reenable interrupts.  */
 	[--sp] = reti;
-	r0 = [sp++];
+	sp += 4;
 
 	SP += -12;
 	call _schedule;
@@ -737,7 +743,7 @@ ENTRY(_system_call)
 .Lsyscall_do_signals:
 	/* Reenable interrupts.  */
 	[--sp] = reti;
-	r0 = [sp++];
+	sp += 4;
 
 	r0 = sp;
 	SP += -12;
@@ -747,10 +753,6 @@ ENTRY(_system_call)
 .Lsyscall_really_exit:
 	r5 = [sp + PT_RESERVED];
 	rets = r5;
-#ifdef CONFIG_IPIPE
-	[--sp] = reti;
-	r5 = [sp++];
-#endif /* CONFIG_IPIPE */
 	rts;
 ENDPROC(_system_call)
 
@@ -904,14 +906,9 @@ ENDPROC(_ret_from_exception)
 
 #ifdef CONFIG_IPIPE
 
-_sync_root_irqs:
-	[--sp] = reti;		/* Reenable interrupts */
-	r0 = [sp++];
-	jump.l ___ipipe_sync_root
-
 _resume_kernel_from_int:
-	r0.l = _sync_root_irqs
-	r0.h = _sync_root_irqs
+	r0.l = ___ipipe_sync_root;
+	r0.h = ___ipipe_sync_root;
 	[--sp] = rets;
 	[--sp] = ( r7:4, p5:3 );
 	SP += -12;
-- 
cgit v1.2.3


From f4e129399c9ead8ec37910ce9793813698c2df51 Mon Sep 17 00:00:00 2001
From: Philippe Gerum <rpm@xenomai.org>
Date: Mon, 22 Jun 2009 18:26:22 +0200
Subject: Blackfin: inline I-pipe bypass code in ret_from_exception

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/ipipe.c      |  5 -----
 arch/blackfin/mach-common/entry.S | 14 +++++++-------
 2 files changed, 7 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index be4f24ebd40..5d7382396dc 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -164,11 +164,6 @@ out:
 		__clear_bit(IPIPE_STALL_FLAG, &p->status);
 }
 
-int __ipipe_check_root(void)
-{
-	return ipipe_root_domain_p;
-}
-
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 2c58b60ff13..cbc5b6d1ed0 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -840,13 +840,13 @@ ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
 #ifdef CONFIG_IPIPE
-	[--sp] = rets;
-	SP += -12;
-	call ___ipipe_check_root
-	SP += 12
-	rets = [sp++];
-	cc = r0 == 0;
-	if cc jump 4f;                /* not on behalf of Linux, get out */
+	p2.l = _per_cpu__ipipe_percpu_domain;
+	p2.h = _per_cpu__ipipe_percpu_domain;
+	r0.l = _ipipe_root;
+	r0.h = _ipipe_root;
+	r2 = [p2];
+	cc = r0 == r2;
+	if !cc jump 4f;  /* not on behalf of the root domain, get out */
 #endif /* CONFIG_IPIPE */
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
-- 
cgit v1.2.3


From 18070dd6692a35bec266ed9ea559c24da4fdeeef Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Tue, 23 Jun 2009 20:17:21 +0000
Subject: Blackfin: cleanup traps decode_address() a bit

Unify the address display to shrink the code, and add missing decoding of
a few special Blackfin-specific regions (L1 ROM and MMRs).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/traps.c | 48 +++++++++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 599459749a5..519accaf4af 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -100,7 +100,11 @@ static void decode_address(char *buf, unsigned long address)
 	char *modname;
 	char *delim = ":";
 	char namebuf[128];
+#endif
+
+	buf += sprintf(buf, "<0x%08lx> ", address);
 
+#ifdef CONFIG_KALLSYMS
 	/* look up the address and see if we are in kernel space */
 	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
 
@@ -108,23 +112,33 @@ static void decode_address(char *buf, unsigned long address)
 		/* yeah! kernel space! */
 		if (!modname)
 			modname = delim = "";
-		sprintf(buf, "<0x%p> { %s%s%s%s + 0x%lx }",
-		              (void *)address, delim, modname, delim, symname,
-		              (unsigned long)offset);
+		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
+		        delim, modname, delim, symname,
+		        (unsigned long)offset);
 		return;
-
 	}
 #endif
 
-	/* Problem in fixed code section? */
 	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
-		sprintf(buf, "<0x%p> /* Maybe fixed code section */", (void *)address);
+		/* Problem in fixed code section? */
+		strcat(buf, "/* Maybe fixed code section */");
+		return;
+
+	} else if (address < CONFIG_BOOT_LOAD) {
+		/* Problem somewhere before the kernel start address */
+		strcat(buf, "/* Maybe null pointer? */");
+		return;
+
+	} else if (address >= COREMMR_BASE) {
+		strcat(buf, "/* core mmrs */");
+		return;
+
+	} else if (address >= SYSMMR_BASE) {
+		strcat(buf, "/* system mmrs */");
 		return;
-	}
 
-	/* Problem somewhere before the kernel start address */
-	if (address < CONFIG_BOOT_LOAD) {
-		sprintf(buf, "<0x%p> /* Maybe null pointer? */", (void *)address);
+	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
+		strcat(buf, "/* on-chip L1 ROM */");
 		return;
 	}
 
@@ -172,18 +186,16 @@ static void decode_address(char *buf, unsigned long address)
 						offset = (address - vma->vm_start) +
 							 (vma->vm_pgoff << PAGE_SHIFT);
 
-					sprintf(buf, "<0x%p> [ %s + 0x%lx ]",
-						(void *)address, name, offset);
+					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
 				} else
-					sprintf(buf, "<0x%p> [ %s vma:0x%lx-0x%lx]",
-						(void *)address, name,
-						vma->vm_start, vma->vm_end);
+					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
+						name, vma->vm_start, vma->vm_end);
 
 				if (!in_atomic)
 					mmput(mm);
 
-				if (!strlen(buf))
-					sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
+				if (buf[0] == '\0')
+					sprintf(buf, "[ %s ] dynamic memory", name);
 
 				goto done;
 			}
@@ -193,7 +205,7 @@ static void decode_address(char *buf, unsigned long address)
 	}
 
 	/* we were unable to find this address anywhere */
-	sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
+	sprintf(buf, "/* kernel dynamic memory */");
 
 done:
 	write_unlock_irqrestore(&tasklist_lock, flags);
-- 
cgit v1.2.3


From c014e15a2f667f91b5c2d08a90d77197a89d8065 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Wed, 24 Jun 2009 20:02:58 -0400
Subject: Blackfin: convert ptrace to new memory functions

Now that we have a Blackfin memory function to figure out how to properly
access the different regions, drop the custom memory range checks in our
ptrace code and use that.  It makes the code nicer and fixes bugs where
the ptrace logic wasn't handling all the different regions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/ptrace.c | 129 +++++++++++++++++++++++-------------------
 1 file changed, 72 insertions(+), 57 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 6a387eec6b6..271d7c63cef 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -206,6 +206,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
 	unsigned long __user *datap = (unsigned long __user *)data;
+	void *paddr = (void *)addr;
 
 	switch (request) {
 		/* when I and D space are separate, these will need to be fixed. */
@@ -215,42 +216,49 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_PEEKTEXT:	/* read word at location addr. */
 		{
 			unsigned long tmp = 0;
-			int copied;
+			int copied = 0, to_copy = sizeof(tmp);
 
 			ret = -EIO;
-			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %ld\n", addr, sizeof(data));
-			if (is_user_addr_valid(child, addr, sizeof(tmp)) < 0)
+			pr_debug("ptrace: PEEKTEXT at addr 0x%08lx + %i\n", addr, to_copy);
+			if (is_user_addr_valid(child, addr, to_copy) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-			if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start()
-			    && addr + sizeof(tmp) <= get_l1_code_start() + L1_CODE_LENGTH) {
-				safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
-			    && addr + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
-			    && addr + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else if (addr >= FIXED_CODE_START
-			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
-				copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
-				copied = sizeof(tmp);
-
-			} else
+			switch (bfin_mem_access_type(addr, to_copy)) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
 				copied = access_process_vm(child, addr, &tmp,
-							   sizeof(tmp), 0);
+				                           to_copy, 0);
+				if (copied)
+					break;
+
+				/* hrm, why didn't that work ... maybe no mapping */
+				if (addr >= FIXED_CODE_START &&
+				    addr + to_copy <= FIXED_CODE_END) {
+					copy_from_user_page(0, 0, 0, &tmp, paddr, to_copy);
+					copied = to_copy;
+				} else if (addr >= BOOT_ROM_START) {
+					memcpy(&tmp, paddr, to_copy);
+					copied = to_copy;
+				}
 
-			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
-			if (copied != sizeof(tmp))
 				break;
-			ret = put_user(tmp, datap);
+			case BFIN_MEM_ACCESS_DMA:
+				if (safe_dma_memcpy(&tmp, paddr, to_copy))
+					copied = to_copy;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(&tmp, paddr, to_copy))
+					copied = to_copy;
+				break;
+			default:
+				copied = 0;
+				break;
+			}
+
+			pr_debug("ptrace: copied size %d [0x%08lx]\n", copied, tmp);
+			if (copied == to_copy)
+				ret = put_user(tmp, datap);
 			break;
 		}
 
@@ -294,43 +302,50 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		/* fall through */
 	case PTRACE_POKETEXT:	/* write the word at location addr. */
 		{
-			int copied;
+			int copied = 0, to_copy = sizeof(data);
 
 			ret = -EIO;
-			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %ld bytes %lx\n",
-			         addr, sizeof(data), data);
-			if (is_user_addr_valid(child, addr, sizeof(data)) < 0)
+			pr_debug("ptrace: POKETEXT at addr 0x%08lx + %i bytes %lx\n",
+			         addr, to_copy, data);
+			if (is_user_addr_valid(child, addr, to_copy) < 0)
 				break;
 			pr_debug("ptrace: user address is valid\n");
 
-			if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start()
-			    && addr + sizeof(data) <= get_l1_code_start() + L1_CODE_LENGTH) {
-				safe_dma_memcpy ((void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else if (L1_DATA_A_LENGTH != 0 && addr >= L1_DATA_A_START
-			    && addr + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
-				memcpy((void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else if (L1_DATA_B_LENGTH != 0 && addr >= L1_DATA_B_START
-			    && addr + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
-				memcpy((void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else if (addr >= FIXED_CODE_START
-			    && addr + sizeof(data) <= FIXED_CODE_END) {
-				copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
-				copied = sizeof(data);
-
-			} else
+			switch (bfin_mem_access_type(addr, to_copy)) {
+			case BFIN_MEM_ACCESS_CORE:
+			case BFIN_MEM_ACCESS_CORE_ONLY:
 				copied = access_process_vm(child, addr, &data,
-							   sizeof(data), 1);
+				                           to_copy, 0);
+				if (copied)
+					break;
+
+				/* hrm, why didn't that work ... maybe no mapping */
+				if (addr >= FIXED_CODE_START &&
+				    addr + to_copy <= FIXED_CODE_END) {
+					copy_to_user_page(0, 0, 0, paddr, &data, to_copy);
+					copied = to_copy;
+				} else if (addr >= BOOT_ROM_START) {
+					memcpy(paddr, &data, to_copy);
+					copied = to_copy;
+				}
 
-			pr_debug("ptrace: copied size %d\n", copied);
-			if (copied != sizeof(data))
 				break;
-			ret = 0;
+			case BFIN_MEM_ACCESS_DMA:
+				if (safe_dma_memcpy(paddr, &data, to_copy))
+					copied = to_copy;
+				break;
+			case BFIN_MEM_ACCESS_ITEST:
+				if (isram_memcpy(paddr, &data, to_copy))
+					copied = to_copy;
+				break;
+			default:
+				copied = 0;
+				break;
+			}
+
+			pr_debug("ptrace: copied size %d\n", copied);
+			if (copied == to_copy)
+				ret = 0;
 			break;
 		}
 
-- 
cgit v1.2.3


From 22532578ee0f8725e0155e528c29ff992c1950c7 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Thu, 25 Jun 2009 15:49:38 +0000
Subject: Blackfin: reject outdated/unused/wrong relocation types

All kernel modules are required to be built with -mlong-calls and thus
should not generate any of these relocations.  If they do, it means the
module has not been compiled properly, so rather than trying to handle
them (and running into random run time errors) just error out on module
load to force the module to be compiled correctly.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/module.c | 42 ++++++++----------------------------------
 1 file changed, 8 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index d5aee362668..bb940784cf2 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -243,40 +243,6 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 #endif
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
-		case R_BFIN_PCREL24:
-		case R_BFIN_PCREL24_JUMP_L:
-			/* Add the value, subtract its postition */
-			location16 =
-			    (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].
-					  sh_addr + rel[i].r_offset - 2);
-			location32 = (uint32_t *) location16;
-			value -= (uint32_t) location32;
-			value >>= 1;
-			if ((value & 0xFF000000) != 0 &&
-			    (value & 0xFF000000) != 0xFF000000) {
-				printk(KERN_ERR "module %s: relocation overflow\n",
-				       mod->name);
-				return -ENOEXEC;
-			}
-			pr_debug("value is %x, before %x-%x after %x-%x\n", value,
-			       *location16, *(location16 + 1),
-			       (*location16 & 0xff00) | (value >> 16 & 0x00ff),
-			       value & 0xffff);
-			*location16 =
-			    (*location16 & 0xff00) | (value >> 16 & 0x00ff);
-			*(location16 + 1) = value & 0xffff;
-			break;
-		case R_BFIN_PCREL12_JUMP:
-		case R_BFIN_PCREL12_JUMP_S:
-			value -= (uint32_t) location32;
-			value >>= 1;
-			*location16 = (value & 0xfff);
-			break;
-		case R_BFIN_PCREL10:
-			value -= (uint32_t) location32;
-			value >>= 1;
-			*location16 = (value & 0x3ff);
-			break;
 		case R_BFIN_LUIMM16:
 			pr_debug("before %x after %x\n", *location16,
 				       (value & 0xffff));
@@ -302,6 +268,14 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			pr_debug("before %x after %x\n", *location32, value);
 			*location32 = value;
 			break;
+		case R_BFIN_PCREL24:
+		case R_BFIN_PCREL24_JUMP_L:
+		case R_BFIN_PCREL12_JUMP:
+		case R_BFIN_PCREL12_JUMP_S:
+		case R_BFIN_PCREL10:
+			printk(KERN_ERR "module %s: Unsupported relocation: %u (no -mlong-calls?)\n"
+				mod->name, ELF32_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
 		default:
 			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
 			       mod->name, ELF32_R_TYPE(rel[i].r_info));
-- 
cgit v1.2.3


From dc6b1ac98434d2c39d86de19aec9cf701b588c81 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 26 Jun 2009 00:35:24 +0000
Subject: Blackfin: cleanup printk() usage in module code

Convert all printk() statements to use the common pr_xxx() funcs and use
the new pr_fmt() function to standardize all of the output.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/module.c | 59 ++++++++++++++++++-------------------------
 1 file changed, 25 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index bb940784cf2..b8f4c67eb2e 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -27,6 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#define pr_fmt(fmt) "module %s: " fmt
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
@@ -72,9 +73,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-				       "module %s: L1 instruction memory allocation failed\n",
-				       mod->name);
+				pr_err("L1 inst memory allocation failed\n",
+					mod->name);
 				return -1;
 			}
 			dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -87,8 +87,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
@@ -102,8 +101,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
@@ -115,8 +113,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.data_b_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
@@ -128,8 +125,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.bss_b_l1 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L1 data memory allocation failed\n",
+				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
@@ -143,9 +139,8 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.text_l2 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-				       "module %s: L2 SRAM allocation failed\n",
-				       mod->name);
+				pr_err("L2 SRAM allocation failed\n",
+					mod->name);
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
@@ -158,8 +153,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.data_l2 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L2 SRAM allocation failed\n",
+				pr_err("L2 SRAM allocation failed\n",
 					mod->name);
 				return -1;
 			}
@@ -173,8 +167,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.bss_l2 = dest;
 			if (dest == NULL) {
-				printk(KERN_ERR
-					"module %s: L2 SRAM allocation failed\n",
+				pr_err("L2 SRAM allocation failed\n",
 					mod->name);
 				return -1;
 			}
@@ -190,7 +183,7 @@ int
 apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
 	       unsigned int symindex, unsigned int relsec, struct module *me)
 {
-	printk(KERN_ERR "module %s: .rel unsupported\n", me->name);
+	pr_err(".rel unsupported\n", me->name);
 	return -ENOEXEC;
 }
 
@@ -217,8 +210,8 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 	uint16_t *location16;
 	uint32_t value;
 
-	pr_debug("Applying relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
+	pr_debug("applying relocate section %u to %u\n", mod->name,
+		relsec, sechdrs[relsec].sh_info);
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
 		location16 =
@@ -231,21 +224,22 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 		    + ELF32_R_SYM(rel[i].r_info);
 		value = sym->st_value;
 		value += rel[i].r_addend;
-		pr_debug("location is %x, value is %x type is %d \n",
-			 (unsigned int) location32, value,
-			 ELF32_R_TYPE(rel[i].r_info));
+
 #ifdef CONFIG_SMP
 		if ((unsigned long)location16 >= COREB_L1_DATA_A_START) {
-			printk(KERN_ERR "module %s: cannot relocate in L1: %u (SMP kernel)",
-				       mod->name, ELF32_R_TYPE(rel[i].r_info));
+			pr_err("cannot relocate in L1: %u (SMP kernel)",
+				mod->name, ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
 #endif
+
+		pr_debug("location is %lx, value is %x type is %d\n",
+			mod->name, (unsigned long)location32, value,
+			ELF32_R_TYPE(rel[i].r_info));
+
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
 		case R_BFIN_LUIMM16:
-			pr_debug("before %x after %x\n", *location16,
-				       (value & 0xffff));
 			tmp = (value & 0xffff);
 			if ((unsigned long)location16 >= L1_CODE_START) {
 				dma_memcpy(location16, &tmp, 2);
@@ -253,8 +247,6 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 				*location16 = tmp;
 			break;
 		case R_BFIN_HUIMM16:
-			pr_debug("before %x after %x\n", *location16,
-				       ((value >> 16) & 0xffff));
 			tmp = ((value >> 16) & 0xffff);
 			if ((unsigned long)location16 >= L1_CODE_START) {
 				dma_memcpy(location16, &tmp, 2);
@@ -265,7 +257,6 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			*location16 = (value & 0xffff);
 			break;
 		case R_BFIN_BYTE4_DATA:
-			pr_debug("before %x after %x\n", *location32, value);
 			*location32 = value;
 			break;
 		case R_BFIN_PCREL24:
@@ -273,12 +264,12 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 		case R_BFIN_PCREL12_JUMP:
 		case R_BFIN_PCREL12_JUMP_S:
 		case R_BFIN_PCREL10:
-			printk(KERN_ERR "module %s: Unsupported relocation: %u (no -mlong-calls?)\n"
+			pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
 				mod->name, ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		default:
-			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
-			       mod->name, ELF32_R_TYPE(rel[i].r_info));
+			pr_err("unknown relocation: %u\n", mod->name,
+				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
 	}
-- 
cgit v1.2.3


From 70deca9f9ca99e7a5fb88b9e4cb18e5eb1b79120 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 26 Jun 2009 00:37:40 +0000
Subject: Blackfin: convert malloc()/memset() to zalloc() in module code

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/module.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index b8f4c67eb2e..50d7fbfe1ce 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -98,14 +98,13 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
 		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
 		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
-			dest = l1_data_sram_alloc(s->sh_size);
+			dest = l1_data_sram_zalloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
 				pr_err("L1 data memory allocation failed\n",
 					mod->name);
 				return -1;
 			}
-			memset(dest, 0, s->sh_size);
 			s->sh_flags &= ~SHF_ALLOC;
 			s->sh_addr = (unsigned long)dest;
 		}
@@ -164,14 +163,13 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
 		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
 		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
-			dest = l2_sram_alloc(s->sh_size);
+			dest = l2_sram_zalloc(s->sh_size);
 			mod->arch.bss_l2 = dest;
 			if (dest == NULL) {
 				pr_err("L2 SRAM allocation failed\n",
 					mod->name);
 				return -1;
 			}
-			memset(dest, 0, s->sh_size);
 			s->sh_flags &= ~SHF_ALLOC;
 			s->sh_addr = (unsigned long)dest;
 		}
-- 
cgit v1.2.3


From 459fec9073bca854badc1a719f7c12f5162d0edd Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 26 Jun 2009 00:48:33 +0000
Subject: Blackfin: cleanup module section checking

The current module section handling code has a lot of verbose statements
copied and pasted throughout which makes it pretty hard to digest at a
glance.  By unifying all of these up front, it is a lot easier to quickly
get an idea of what is actually going on.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/module.c | 111 +++++++++++++++++++++++-------------------
 1 file changed, 60 insertions(+), 51 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 50d7fbfe1ce..2ad805e67af 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -53,7 +53,7 @@ void module_free(struct module *mod, void *module_region)
 
 /* Transfer the section to the L1 memory */
 int
-module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
+module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			  char *secstrings, struct module *mod)
 {
 	/*
@@ -64,12 +64,18 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 	 * NOTE: this breaks the semantic of mod->arch structure.
 	 */
 	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
-	void *dest = NULL;
+	void *dest;
 
 	for (s = sechdrs; s < sechdrs_end; ++s) {
-		if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
+		const char *shname = secstrings + s->sh_name;
+
+		if (s->sh_size == 0)
+			continue;
+
+		if (!strcmp(".l1.text", shname) ||
+		    (!strcmp(".text", shname) &&
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L1))) {
+
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
@@ -78,12 +84,11 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 				return -1;
 			}
 			dma_memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l1.data", shname) ||
+		           (!strcmp(".data", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
+
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
@@ -92,12 +97,11 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
-		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l1.bss", shname) ||
+		           (!strcmp(".bss", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L1))) {
+
 			dest = l1_data_sram_zalloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
@@ -105,10 +109,9 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 					mod->name);
 				return -1;
 			}
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l1.data.B", secstrings + s->sh_name) == 0) {
+
+		} else if (!strcmp(".l1.data.B", shname)) {
+
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.data_b_l1 = dest;
 			if (dest == NULL) {
@@ -117,10 +120,9 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l1.bss.B", secstrings + s->sh_name) == 0) {
+
+		} else if (!strcmp(".l1.bss.B", shname)) {
+
 			dest = l1_data_B_sram_alloc(s->sh_size);
 			mod->arch.bss_b_l1 = dest;
 			if (dest == NULL) {
@@ -129,12 +131,11 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 				return -1;
 			}
 			memset(dest, 0, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l2.text", shname) ||
+		           (!strcmp(".text", shname) &&
+		            (hdr->e_flags & EF_BFIN_CODE_IN_L2))) {
+
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.text_l2 = dest;
 			if (dest == NULL) {
@@ -143,12 +144,11 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
-		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l2.data", shname) ||
+		           (!strcmp(".data", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
+
 			dest = l2_sram_alloc(s->sh_size);
 			mod->arch.data_l2 = dest;
 			if (dest == NULL) {
@@ -157,12 +157,11 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 				return -1;
 			}
 			memcpy(dest, (void *)s->sh_addr, s->sh_size);
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
-		if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
-		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+
+		} else if (!strcmp(".l2.bss", shname) ||
+		           (!strcmp(".bss", shname) &&
+		            (hdr->e_flags & EF_BFIN_DATA_IN_L2))) {
+
 			dest = l2_sram_zalloc(s->sh_size);
 			mod->arch.bss_l2 = dest;
 			if (dest == NULL) {
@@ -170,10 +169,14 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 					mod->name);
 				return -1;
 			}
-			s->sh_flags &= ~SHF_ALLOC;
-			s->sh_addr = (unsigned long)dest;
-		}
+
+		} else
+			continue;
+
+		s->sh_flags &= ~SHF_ALLOC;
+		s->sh_addr = (unsigned long)dest;
 	}
+
 	return 0;
 }
 
@@ -295,22 +298,28 @@ module_finalize(const Elf_Ehdr * hdr,
 	for (i = 1; i < hdr->e_shnum; i++) {
 		const char *strtab = (char *)sechdrs[strindex].sh_addr;
 		unsigned int info = sechdrs[i].sh_info;
+		const char *shname = secstrings + sechdrs[i].sh_name;
 
 		/* Not a valid relocation section? */
 		if (info >= hdr->e_shnum)
 			continue;
 
-		if ((sechdrs[i].sh_type == SHT_RELA) &&
-		    ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
-		    (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
-		    ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
-			(hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
+		/* Only support RELA relocation types */
+		if (sechdrs[i].sh_type != SHT_RELA)
+			continue;
+
+		if (!strcmp(".rela.l2.text", shname) ||
+		    !strcmp(".rela.l1.text", shname) ||
+		    (!strcmp(".rela.text", shname) &&
+			 (hdr->e_flags & (EF_BFIN_CODE_IN_L1 | EF_BFIN_CODE_IN_L2)))) {
+
 			err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
 					   symindex, i, mod);
 			if (err < 0)
 				return -ENOEXEC;
 		}
 	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From a769094061289453e8c331d7746e0e26f5d1e38b Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 26 Jun 2009 00:49:51 +0000
Subject: Blackfin: fix module reloc handling for all memory regions

The current module relocation code has spotty handling wrt different
memory regions (like L1 instruction).  Rather than try to fix each
little spot, use the new common memory functions to greatly simplify
everything and make sure it is always correct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/module.c | 62 ++++++++++++++++++++++++-------------------
 1 file changed, 34 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 2ad805e67af..67fc7a56c86 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -37,6 +37,7 @@
 #include <linux/kernel.h>
 #include <asm/dma.h>
 #include <asm/cacheflush.h>
+#include <asm/uaccess.h>
 
 void *module_alloc(unsigned long size)
 {
@@ -199,26 +200,23 @@ apply_relocate(Elf_Shdr * sechdrs, const char *strtab,
 /*            gas does not generate it.                                  */
 /*************************************************************************/
 int
-apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
+apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		   unsigned int symindex, unsigned int relsec,
 		   struct module *mod)
 {
 	unsigned int i;
-	unsigned short tmp;
 	Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
-	uint32_t *location32;
-	uint16_t *location16;
-	uint32_t value;
+	unsigned long location, value, size;
 
 	pr_debug("applying relocate section %u to %u\n", mod->name,
 		relsec, sechdrs[relsec].sh_info);
+
 	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
 		/* This is where to make the change */
-		location16 =
-		    (uint16_t *) (sechdrs[sechdrs[relsec].sh_info].sh_addr +
-				  rel[i].r_offset);
-		location32 = (uint32_t *) location16;
+		location = sechdrs[sechdrs[relsec].sh_info].sh_addr +
+		           rel[i].r_offset;
+
 		/* This is the symbol it is referring to. Note that all
 		   undefined symbols have been resolved. */
 		sym = (Elf32_Sym *) sechdrs[symindex].sh_addr
@@ -227,39 +225,28 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 		value += rel[i].r_addend;
 
 #ifdef CONFIG_SMP
-		if ((unsigned long)location16 >= COREB_L1_DATA_A_START) {
+		if (location >= COREB_L1_DATA_A_START) {
 			pr_err("cannot relocate in L1: %u (SMP kernel)",
 				mod->name, ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
 #endif
 
-		pr_debug("location is %lx, value is %x type is %d\n",
-			mod->name, (unsigned long)location32, value,
-			ELF32_R_TYPE(rel[i].r_info));
+		pr_debug("location is %lx, value is %lx type is %d\n",
+			mod->name, location, value, ELF32_R_TYPE(rel[i].r_info));
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 
-		case R_BFIN_LUIMM16:
-			tmp = (value & 0xffff);
-			if ((unsigned long)location16 >= L1_CODE_START) {
-				dma_memcpy(location16, &tmp, 2);
-			} else
-				*location16 = tmp;
-			break;
 		case R_BFIN_HUIMM16:
-			tmp = ((value >> 16) & 0xffff);
-			if ((unsigned long)location16 >= L1_CODE_START) {
-				dma_memcpy(location16, &tmp, 2);
-			} else
-				*location16 = tmp;
-			break;
+			value >>= 16;
+		case R_BFIN_LUIMM16:
 		case R_BFIN_RIMM16:
-			*location16 = (value & 0xffff);
+			size = 2;
 			break;
 		case R_BFIN_BYTE4_DATA:
-			*location32 = value;
+			size = 4;
 			break;
+
 		case R_BFIN_PCREL24:
 		case R_BFIN_PCREL24_JUMP_L:
 		case R_BFIN_PCREL12_JUMP:
@@ -268,12 +255,31 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab,
 			pr_err("unsupported relocation: %u (no -mlong-calls?)\n",
 				mod->name, ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
+
 		default:
 			pr_err("unknown relocation: %u\n", mod->name,
 				ELF32_R_TYPE(rel[i].r_info));
 			return -ENOEXEC;
 		}
+
+		switch (bfin_mem_access_type(location, size)) {
+		case BFIN_MEM_ACCESS_CORE:
+		case BFIN_MEM_ACCESS_CORE_ONLY:
+			memcpy((void *)location, &value, size);
+			break;
+		case BFIN_MEM_ACCESS_DMA:
+			dma_memcpy((void *)location, &value, size);
+			break;
+		case BFIN_MEM_ACCESS_ITEST:
+			isram_memcpy((void *)location, &value, size);
+			break;
+		default:
+			pr_err("invalid relocation for %#lx\n",
+				mod->name, location);
+			return -ENOEXEC;
+		}
 	}
+
 	return 0;
 }
 
-- 
cgit v1.2.3


From 2f812c0bd5ee1d9c145fb1c3523ecdf45e05f8ce Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Fri, 26 Jun 2009 12:52:46 +0000
Subject: Blackfin: clean up early memory setup code

Remove code duplication, and only print out memory warnings when they are
an actual problem.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/setup.c | 60 +++++++++++++++++++++++---------------------
 1 file changed, 32 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6225edae488..6dbf21930a9 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -511,6 +511,7 @@ static __init void memory_setup(void)
 #ifdef CONFIG_MTD_UCLINUX
 	unsigned long mtd_phys = 0;
 #endif
+	unsigned long max_mem;
 
 	_rambase = (unsigned long)_stext;
 	_ramstart = (unsigned long)_end;
@@ -520,7 +521,22 @@ static __init void memory_setup(void)
 		panic("DMA region exceeds memory limit: %lu.",
 			_ramend - _ramstart);
 	}
-	memory_end = _ramend - DMA_UNCACHED_REGION;
+	max_mem = memory_end = _ramend - DMA_UNCACHED_REGION;
+
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
+	/* Due to a Hardware Anomaly we need to limit the size of usable
+	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
+	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+	 */
+# if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
+	if (max_mem >= 56 * 1024 * 1024)
+		max_mem = 56 * 1024 * 1024;
+# else
+	if (max_mem >= 60 * 1024 * 1024)
+		max_mem = 60 * 1024 * 1024;
+# endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
+#endif				/* ANOMALY_05000263 */
+
 
 #ifdef CONFIG_MPU
 	/* Round up to multiple of 4MB */
@@ -549,22 +565,16 @@ static __init void memory_setup(void)
 
 # if defined(CONFIG_ROMFS_FS)
 	if (((unsigned long *)mtd_phys)[0] == ROMSB_WORD0
-	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
+	    && ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1) {
 		mtd_size =
 		    PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-#  if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
-	/* Due to a Hardware Anomaly we need to limit the size of usable
-	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
-	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
-	 */
-#   if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
-	if (memory_end >= 56 * 1024 * 1024)
-		memory_end = 56 * 1024 * 1024;
-#   else
-	if (memory_end >= 60 * 1024 * 1024)
-		memory_end = 60 * 1024 * 1024;
-#   endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
-#  endif				/* ANOMALY_05000263 */
+
+		/* ROM_FS is XIP, so if we found it, we need to limit memory */
+		if (memory_end > max_mem) {
+			pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20);
+			memory_end = max_mem;
+		}
+	}
 # endif				/* CONFIG_ROMFS_FS */
 
 	/* Since the default MTD_UCLINUX has no magic number, we just blindly
@@ -586,20 +596,14 @@ static __init void memory_setup(void)
 	}
 #endif				/* CONFIG_MTD_UCLINUX */
 
-#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
-	/* Due to a Hardware Anomaly we need to limit the size of usable
-	 * instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
-	 * 05000263 - Hardware loop corrupted when taking an ICPLB exception
+	/* We need lo limit memory, since everything could have a text section
+	 * of userspace in it, and expose anomaly 05000263. If the anomaly
+	 * doesn't exist, or we don't need to - then dont.
 	 */
-#if (defined(CONFIG_DEBUG_HUNT_FOR_ZERO))
-	if (memory_end >= 56 * 1024 * 1024)
-		memory_end = 56 * 1024 * 1024;
-#else
-	if (memory_end >= 60 * 1024 * 1024)
-		memory_end = 60 * 1024 * 1024;
-#endif				/* CONFIG_DEBUG_HUNT_FOR_ZERO */
-	printk(KERN_NOTICE "Warning: limiting memory to %liMB due to hardware anomaly 05000263\n", memory_end >> 20);
-#endif				/* ANOMALY_05000263 */
+	if (memory_end > max_mem) {
+		pr_info("Limiting kernel memory to %liMB due to anomaly 05000263\n", max_mem >> 20);
+		memory_end = max_mem;
+	}
 
 #ifdef CONFIG_MPU
 	page_mask_nelts = ((_ramend >> PAGE_SHIFT) + 31) / 32;
-- 
cgit v1.2.3


From 204844ebd08cfb0c83689e55d6633dcd0230d36d Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Tue, 30 Jun 2009 14:57:22 +0000
Subject: Blackfin: rename PCF8574 driver config

The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the
defines in the board resources accordingly.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf518/boards/ezbrd.c    | 2 +-
 arch/blackfin/mach-bf527/boards/cm_bf527.c | 2 +-
 arch/blackfin/mach-bf527/boards/ezbrd.c    | 2 +-
 arch/blackfin/mach-bf527/boards/ezkit.c    | 2 +-
 arch/blackfin/mach-bf533/boards/stamp.c    | 2 +-
 arch/blackfin/mach-bf537/boards/stamp.c    | 2 +-
 arch/blackfin/mach-bf548/boards/ezkit.c    | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 809be268e42..4c594e647eb 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -539,7 +539,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index b09484f538f..3a620666bb8 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -799,7 +799,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.type = "pcf8574_lcd",
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.type = "pcf8574_keypad",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 2ad68cd10ae..809c7907b6e 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -596,7 +596,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 75e563d3f9d..b843d0e3f67 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -863,7 +863,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PF8,
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 3d743ccaff6..42d4c9fcc12 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -458,7 +458,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = 39,
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index b9da9790a44..72d11de3047 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1348,7 +1348,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = IRQ_PG6,
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index dc0dd9b2bce..aa82836ebc7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -869,7 +869,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
 #endif
-#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 		.irq = 212,
-- 
cgit v1.2.3


From 9c954f89412b346e0aeec01c5729cb7ca63e2673 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Tue, 30 Jun 2009 09:48:03 +0000
Subject: Blackfin: unify duplicated SMP checks in L2 cache kconfig

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/Kconfig | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 7faa2f554ab..8d04ed968fd 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -987,7 +987,7 @@ endchoice
 config BFIN_L2_DCACHEABLE
 	bool "Enable DCACHE for L2 SRAM"
 	depends on BFIN_DCACHE
-	depends on BF54x || BF561
+	depends on (BF54x || BF561) && !SMP
 	default n
 choice
 	prompt "L2 SRAM DCACHE policy"
@@ -995,11 +995,9 @@ choice
 	default BFIN_L2_WRITEBACK
 config BFIN_L2_WRITEBACK
 	bool "Write back"
-	depends on !SMP
 
 config BFIN_L2_WRITETHROUGH
 	bool "Write through"
-	depends on !SMP
 endchoice
 
 
-- 
cgit v1.2.3


From 81c969a8bc4bdc39032f6c58e50e61a8daeeb655 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Wed, 1 Jul 2009 15:42:13 +0000
Subject: Blackfin: push SRAM locks down into related ifdefs

Rather than defining the locks and initializing them all the time, only do
so when we actually need them (i.e. the SRAM regions exist).  This avoids
dead data and code bloat during runtime.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mm/sram-alloc.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index 99e4dbb1dfd..eb63ab353e5 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -42,11 +42,6 @@
 #include <asm/mem_map.h>
 #include "blackfin_sram.h"
 
-static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock);
-static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock);
-static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock);
-static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp;
-
 /* the data structure for L1 scratchpad and DATA SRAM */
 struct sram_piece {
 	void *paddr;
@@ -55,6 +50,7 @@ struct sram_piece {
 	struct sram_piece *next;
 };
 
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock);
 static DEFINE_PER_CPU(struct sram_piece, free_l1_ssram_head);
 static DEFINE_PER_CPU(struct sram_piece, used_l1_ssram_head);
 
@@ -68,12 +64,18 @@ static DEFINE_PER_CPU(struct sram_piece, free_l1_data_B_sram_head);
 static DEFINE_PER_CPU(struct sram_piece, used_l1_data_B_sram_head);
 #endif
 
+#if L1_DATA_A_LENGTH || L1_DATA_B_LENGTH
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock);
+#endif
+
 #if L1_CODE_LENGTH != 0
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock);
 static DEFINE_PER_CPU(struct sram_piece, free_l1_inst_sram_head);
 static DEFINE_PER_CPU(struct sram_piece, used_l1_inst_sram_head);
 #endif
 
 #if L2_LENGTH != 0
+static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp;
 static struct sram_piece free_l2_sram_head, used_l2_sram_head;
 #endif
 
@@ -225,10 +227,10 @@ static void __init l2_sram_init(void)
 	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
 		L2_LENGTH >> 10,
 		free_l2_sram_head.next->size >> 10);
-#endif
 
 	/* mutex initialize */
 	spin_lock_init(&l2_sram_lock);
+#endif
 }
 
 static int __init bfin_sram_init(void)
@@ -416,18 +418,17 @@ EXPORT_SYMBOL(sram_free);
 
 void *l1_data_A_sram_alloc(size_t size)
 {
+#if L1_DATA_A_LENGTH != 0
 	unsigned long flags;
-	void *addr = NULL;
+	void *addr;
 	unsigned int cpu;
 
 	cpu = get_cpu();
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
-#if L1_DATA_A_LENGTH != 0
 	addr = _sram_alloc(size, &per_cpu(free_l1_data_A_sram_head, cpu),
 			&per_cpu(used_l1_data_A_sram_head, cpu));
-#endif
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
@@ -437,11 +438,15 @@ void *l1_data_A_sram_alloc(size_t size)
 		 (long unsigned int)addr, size);
 
 	return addr;
+#else
+	return NULL;
+#endif
 }
 EXPORT_SYMBOL(l1_data_A_sram_alloc);
 
 int l1_data_A_sram_free(const void *addr)
 {
+#if L1_DATA_A_LENGTH != 0
 	unsigned long flags;
 	int ret;
 	unsigned int cpu;
@@ -450,18 +455,17 @@ int l1_data_A_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&per_cpu(l1_data_sram_lock, cpu), flags);
 
-#if L1_DATA_A_LENGTH != 0
 	ret = _sram_free(addr, &per_cpu(free_l1_data_A_sram_head, cpu),
 			&per_cpu(used_l1_data_A_sram_head, cpu));
-#else
-	ret = -1;
-#endif
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&per_cpu(l1_data_sram_lock, cpu), flags);
 	put_cpu();
 
 	return ret;
+#else
+	return -1;
+#endif
 }
 EXPORT_SYMBOL(l1_data_A_sram_free);
 
-- 
cgit v1.2.3


From 53e18df745b6f833df07ead62ded09ebae3b0303 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Fri, 3 Jul 2009 00:17:45 +0000
Subject: Blackfin: add support for common FDPIC ptrace requests

The FDPIC arches support a standard set of ptrace requests so rather than
define our own custom API, hook up those requests for common code to
leverage.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/ptrace.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 271d7c63cef..30f4828277a 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -285,9 +285,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				tmp = child->mm->start_data;
 #ifdef CONFIG_BINFMT_ELF_FDPIC
 			} else if (addr == (sizeof(struct pt_regs) + 12)) {
-				tmp = child->mm->context.exec_fdpic_loadmap;
+				goto case_PTRACE_GETFDPIC_EXEC;
 			} else if (addr == (sizeof(struct pt_regs) + 16)) {
-				tmp = child->mm->context.interp_fdpic_loadmap;
+				goto case_PTRACE_GETFDPIC_INTERP;
 #endif
 			} else {
 				tmp = get_reg(child, addr);
@@ -296,6 +296,28 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		}
 
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	case PTRACE_GETFDPIC: {
+		unsigned long tmp = 0;
+
+		switch (addr) {
+		case_PTRACE_GETFDPIC_EXEC:
+		case PTRACE_GETFDPIC_EXEC:
+			tmp = child->mm->context.exec_fdpic_loadmap;
+			break;
+		case_PTRACE_GETFDPIC_INTERP:
+		case PTRACE_GETFDPIC_INTERP:
+			tmp = child->mm->context.interp_fdpic_loadmap;
+			break;
+		default:
+			break;
+		}
+
+		ret = put_user(tmp, datap);
+		break;
+	}
+#endif
+
 		/* when I and D space are separate, this will have to be fixed. */
 	case PTRACE_POKEDATA:
 		pr_debug("ptrace: PTRACE_PEEKDATA\n");
-- 
cgit v1.2.3


From 3f871feaf3390c6d6e578818f867917c2e4738a2 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Mon, 6 Jul 2009 14:53:19 +0000
Subject: Blackfin: add an early shadow console

Add a memory based shadow console to keep a copy of the printk buffer in a
location which can be found externally.  This allows bootloaders to locate
and utilize the log buffer in case of silent (early/resume/etc...) crashes.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/early_printk.h |  2 +
 arch/blackfin/kernel/Makefile            |  1 +
 arch/blackfin/kernel/setup.c             |  2 +
 arch/blackfin/kernel/shadow_console.c    | 78 ++++++++++++++++++++++++++++++++
 4 files changed, 83 insertions(+)
 create mode 100644 arch/blackfin/kernel/shadow_console.c

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h
index 110f1c1f845..f5b6b7d972e 100644
--- a/arch/blackfin/include/asm/early_printk.h
+++ b/arch/blackfin/include/asm/early_printk.h
@@ -23,6 +23,8 @@
 
 #ifdef CONFIG_EARLY_PRINTK
 extern int setup_early_printk(char *);
+extern void enable_shadow_console(void);
 #else
 #define setup_early_printk(fmt) do { } while (0)
+#define enable_shadow_console(fmt)  do { } while (0)
 #endif /* CONFIG_EARLY_PRINTK */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 141d9281e4b..a8ddbc8ed5a 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
 obj-$(CONFIG_STACKTRACE)             += stacktrace.o
 
 # the kgdb test puts code into L2 and without linker
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6dbf21930a9..3974764acd2 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -810,6 +810,8 @@ void __init setup_arch(char **cmdline_p)
 {
 	unsigned long sclk, cclk;
 
+	enable_shadow_console();
+
 	/* Check to make sure we are running on the right processor */
 	if (unlikely(CPUID != bfin_cpuid()))
 		printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c
new file mode 100644
index 00000000000..15819ff1057
--- /dev/null
+++ b/arch/blackfin/kernel/shadow_console.c
@@ -0,0 +1,78 @@
+/*
+ * manage a small early shadow of the log buffer which we can pass between the
+ * bootloader so early crash messages are communicated properly and easily
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/string.h>
+#include <asm/blackfin.h>
+#include <asm/irq_handler.h>
+#include <asm/early_printk.h>
+
+#define SHADOW_CONSOLE_START		(0x500)
+#define SHADOW_CONSOLE_END		(0x1000)
+#define SHADOW_CONSOLE_MAGIC_LOC	(0x4F0)
+#define SHADOW_CONSOLE_MAGIC		(0xDEADBEEF)
+
+static __initdata char *shadow_console_buffer = (char *)SHADOW_CONSOLE_START;
+
+static __init void early_shadow_write(struct console *con, const char *s,
+				unsigned int n)
+{
+	/*
+	 * save 2 bytes for the double null at the end
+	 * once we fail on a long line, make sure we don't write a short line afterwards
+	 */
+	if ((shadow_console_buffer + n) <= (char *)(SHADOW_CONSOLE_END - 2)) {
+		memcpy(shadow_console_buffer, s, n);
+		shadow_console_buffer += n;
+		shadow_console_buffer[0] = 0;
+		shadow_console_buffer[1] = 0;
+	} else
+		shadow_console_buffer = (char *)SHADOW_CONSOLE_END;
+}
+
+static __initdata struct console early_shadow_console = {
+	.name = "early_shadow",
+	.write = early_shadow_write,
+	.flags = CON_BOOT | CON_PRINTBUFFER,
+	.index = -1,
+	.device = 0,
+};
+
+__init void enable_shadow_console(void)
+{
+	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
+
+	if (!(early_shadow_console.flags & CON_ENABLED)) {
+		register_console(&early_shadow_console);
+		/* for now, assume things are going to fail */
+		*loc = SHADOW_CONSOLE_MAGIC;
+		loc++;
+		*loc = SHADOW_CONSOLE_START;
+	}
+}
+
+static __init int disable_shadow_console(void)
+{
+	/*
+	 * by the time pure_initcall runs, the standard console is enabled,
+	 * and the early_console is off, so unset the magic numbers
+	 * unregistering the console is taken care of in common code (See
+	 * ./kernel/printk:disable_boot_consoles() )
+	 */
+	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
+
+	*loc = 0;
+
+	return 0;
+}
+pure_initcall(disable_shadow_console);
-- 
cgit v1.2.3


From 837ec2d56c41640d1f1238e52c350b2a516d29ba Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Tue, 7 Jul 2009 20:17:09 +0000
Subject: Blackfin: catch hardware errors earlier during booting

Allow hardware errors to be caught during early portions of booting, and
leave something in the shadow console that people can use to debug their
system with (to be printed out by the bootloader on next reset).

This enables the hardare error interrupts in head.S, allowing us to find
hardware errors when they happen (well, as much as you can with a hardware
error) and prints out the trace if it is enabled.  This will catch errors
(like booting the wrong image on a 533) which previously resulted in a
infinite loop/hang, as well as random hardware errors before before
setup_arch().

To disable this debug only feature - turn off EARLY_PRINTK.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/early_printk.h | 22 ++++++++++
 arch/blackfin/kernel/bfin_dma_5xx.c      |  6 +++
 arch/blackfin/kernel/early_printk.c      | 74 ++++++++++++++++++++++++++++++--
 arch/blackfin/kernel/setup.c             |  3 ++
 arch/blackfin/kernel/shadow_console.c    | 51 ++++++++++++++++++----
 arch/blackfin/mach-common/head.S         | 11 +++++
 arch/blackfin/mm/init.c                  |  3 ++
 7 files changed, 158 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/early_printk.h b/arch/blackfin/include/asm/early_printk.h
index f5b6b7d972e..53a762b6fcd 100644
--- a/arch/blackfin/include/asm/early_printk.h
+++ b/arch/blackfin/include/asm/early_printk.h
@@ -21,10 +21,32 @@
  * GNU General Public License for more details.
  */
 
+
+#ifndef __ASM_EARLY_PRINTK_H__
+#define __ASM_EARLY_PRINTK_H__
+
 #ifdef CONFIG_EARLY_PRINTK
+/* For those that don't include it already */
+#include <linux/console.h>
+
 extern int setup_early_printk(char *);
 extern void enable_shadow_console(void);
+extern int shadow_console_enabled(void);
+extern void mark_shadow_error(void);
+extern void early_shadow_reg(unsigned long reg, unsigned int n);
+extern void early_shadow_write(struct console *con, const char *s,
+	unsigned int n) __attribute__((nonnull(2)));
+#define early_shadow_puts(str) early_shadow_write(NULL, str, strlen(str))
+#define early_shadow_stamp() \
+	do { \
+		early_shadow_puts(__FILE__ " : " __stringify(__LINE__) " ["); \
+		early_shadow_puts(__func__); \
+		early_shadow_puts("]\n"); \
+	} while (0)
 #else
 #define setup_early_printk(fmt) do { } while (0)
 #define enable_shadow_console(fmt)  do { } while (0)
+#define early_shadow_stamp() do { } while (0)
 #endif /* CONFIG_EARLY_PRINTK */
+
+#endif /* __ASM_EARLY_PRINTK_H__ */
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 9f9b8281665..14dea1a87b7 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -19,6 +19,7 @@
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
 #include <asm/uaccess.h>
+#include <asm/early_printk.h>
 
 /*
  * To make sure we work around 05000119 - we always check DMA_DONE bit,
@@ -236,6 +237,7 @@ void blackfin_dma_resume(void)
  */
 void __init blackfin_dma_early_init(void)
 {
+	early_shadow_stamp();
 	bfin_write_MDMA_S0_CONFIG(0);
 	bfin_write_MDMA_S1_CONFIG(0);
 }
@@ -246,6 +248,8 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 	unsigned long src = (unsigned long)psrc;
 	struct dma_register *dst_ch, *src_ch;
 
+	early_shadow_stamp();
+
 	/* We assume that everything is 4 byte aligned, so include
 	 * a basic sanity check
 	 */
@@ -300,6 +304,8 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 
 void __init early_dma_memcpy_done(void)
 {
+	early_shadow_stamp();
+
 	while ((bfin_read_MDMA_S0_CONFIG() && !(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) ||
 	       (bfin_read_MDMA_S1_CONFIG() && !(bfin_read_MDMA_D1_IRQ_STATUS() & DMA_DONE)))
 		continue;
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 2ab56811841..931c78b5ea1 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -27,6 +27,7 @@
 #include <linux/serial_core.h>
 #include <linux/console.h>
 #include <linux/string.h>
+#include <linux/reboot.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <asm/early_printk.h>
@@ -181,6 +182,22 @@ asmlinkage void __init init_early_exception_vectors(void)
 	u32 evt;
 	SSYNC();
 
+	/*
+	 * This starts up the shadow buffer, incase anything crashes before
+	 * setup arch
+	 */
+	mark_shadow_error();
+	early_shadow_puts(linux_banner);
+	early_shadow_stamp();
+
+	if (CPUID != bfin_cpuid()) {
+		early_shadow_puts("Running on wrong machine type, expected");
+		early_shadow_reg(CPUID, 16);
+		early_shadow_puts(", but running on");
+		early_shadow_reg(bfin_cpuid(), 16);
+		early_shadow_puts("\n");
+	}
+
 	/* cannot program in software:
 	 * evt0 - emulation (jtag)
 	 * evt1 - reset
@@ -199,6 +216,7 @@ asmlinkage void __init init_early_exception_vectors(void)
 
 }
 
+__attribute__((__noreturn__))
 asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 {
 	/* This can happen before the uart is initialized, so initialize
@@ -210,10 +228,58 @@ asmlinkage void __init early_trap_c(struct pt_regs *fp, void *retaddr)
 	if (likely(early_console == NULL) && CPUID == bfin_cpuid())
 		setup_early_printk(DEFAULT_EARLY_PORT);
 
-	printk(KERN_EMERG "Early panic\n");
-	dump_bfin_mem(fp);
-	show_regs(fp);
-	dump_bfin_trace_buffer();
+	if (!shadow_console_enabled()) {
+		/* crap - we crashed before setup_arch() */
+		early_shadow_puts("panic before setup_arch\n");
+		early_shadow_puts("IPEND:");
+		early_shadow_reg(fp->ipend, 16);
+		if (fp->seqstat & SEQSTAT_EXCAUSE) {
+			early_shadow_puts("\nEXCAUSE:");
+			early_shadow_reg(fp->seqstat & SEQSTAT_EXCAUSE, 8);
+		}
+		if (fp->seqstat & SEQSTAT_HWERRCAUSE) {
+			early_shadow_puts("\nHWERRCAUSE:");
+			early_shadow_reg(
+				(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14, 8);
+		}
+		early_shadow_puts("\nErr @");
+		if (fp->ipend & EVT_EVX)
+			early_shadow_reg(fp->retx, 32);
+		else
+			early_shadow_reg(fp->pc, 32);
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+		early_shadow_puts("\nTrace:");
+		if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+			while (bfin_read_TBUFSTAT() & TBUFCNT) {
+				early_shadow_puts("\nT  :");
+				early_shadow_reg(bfin_read_TBUF(), 32);
+				early_shadow_puts("\n S :");
+				early_shadow_reg(bfin_read_TBUF(), 32);
+			}
+		}
+#endif
+		early_shadow_puts("\nUse bfin-elf-addr2line to determine "
+			"function names\n");
+		/*
+		 * We should panic(), but we can't - since panic calls printk,
+		 * and printk uses memcpy.
+		 * we want to reboot, but if the machine type is different,
+		 * can't due to machine specific reboot sequences
+		 */
+		if (CPUID == bfin_cpuid()) {
+			early_shadow_puts("Trying to restart\n");
+			machine_restart("");
+		}
+
+		early_shadow_puts("Halting, since it is not safe to restart\n");
+		while (1)
+			asm volatile ("EMUEXCPT; IDLE;\n");
+
+	} else {
+		printk(KERN_EMERG "Early panic\n");
+		show_regs(fp);
+		dump_bfin_trace_buffer();
+	}
 
 	panic("Died early");
 }
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 3974764acd2..f92fffc3168 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -187,6 +187,8 @@ void __init bfin_relocate_l1_mem(void)
 	unsigned long l1_data_b_length;
 	unsigned long l2_length;
 
+	early_shadow_stamp();
+
 	/*
 	 * due to the ALIGN(4) in the arch/blackfin/kernel/vmlinux.lds.S
 	 * we know that everything about l1 text/data is nice and aligned,
@@ -1352,6 +1354,7 @@ const struct seq_operations cpuinfo_op = {
 
 void __init cmdline_init(const char *r0)
 {
+	early_shadow_stamp();
 	if (r0)
 		strncpy(command_line, r0, COMMAND_LINE_SIZE);
 }
diff --git a/arch/blackfin/kernel/shadow_console.c b/arch/blackfin/kernel/shadow_console.c
index 15819ff1057..8b8c7107a16 100644
--- a/arch/blackfin/kernel/shadow_console.c
+++ b/arch/blackfin/kernel/shadow_console.c
@@ -24,15 +24,18 @@
 
 static __initdata char *shadow_console_buffer = (char *)SHADOW_CONSOLE_START;
 
-static __init void early_shadow_write(struct console *con, const char *s,
+__init void early_shadow_write(struct console *con, const char *s,
 				unsigned int n)
 {
+	unsigned int i;
 	/*
 	 * save 2 bytes for the double null at the end
 	 * once we fail on a long line, make sure we don't write a short line afterwards
 	 */
 	if ((shadow_console_buffer + n) <= (char *)(SHADOW_CONSOLE_END - 2)) {
-		memcpy(shadow_console_buffer, s, n);
+		/* can't use memcpy - it may not be relocated yet */
+		for (i = 0; i <= n; i++)
+			shadow_console_buffer[i] = s[i];
 		shadow_console_buffer += n;
 		shadow_console_buffer[0] = 0;
 		shadow_console_buffer[1] = 0;
@@ -48,16 +51,24 @@ static __initdata struct console early_shadow_console = {
 	.device = 0,
 };
 
-__init void enable_shadow_console(void)
+__init int shadow_console_enabled(void)
+{
+	return early_shadow_console.flags & CON_ENABLED;
+}
+
+__init void mark_shadow_error(void)
 {
 	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
+	loc[0] = SHADOW_CONSOLE_MAGIC;
+	loc[1] = SHADOW_CONSOLE_START;
+}
 
-	if (!(early_shadow_console.flags & CON_ENABLED)) {
+__init void enable_shadow_console(void)
+{
+	if (!shadow_console_enabled()) {
 		register_console(&early_shadow_console);
 		/* for now, assume things are going to fail */
-		*loc = SHADOW_CONSOLE_MAGIC;
-		loc++;
-		*loc = SHADOW_CONSOLE_START;
+		mark_shadow_error();
 	}
 }
 
@@ -71,8 +82,32 @@ static __init int disable_shadow_console(void)
 	 */
 	int *loc = (int *)SHADOW_CONSOLE_MAGIC_LOC;
 
-	*loc = 0;
+	loc[0] = 0;
 
 	return 0;
 }
 pure_initcall(disable_shadow_console);
+
+/*
+ * since we can't use printk, dump numbers (as hex), n = # bits
+ */
+__init void early_shadow_reg(unsigned long reg, unsigned int n)
+{
+	/*
+	 * can't use any "normal" kernel features, since thay
+	 * may not be relocated to their execute address yet
+	 */
+	int i;
+	char ascii[11] = " 0x";
+
+	n = n / 4;
+	reg = reg << ((8 - n) * 4);
+	n += 3;
+
+	for (i = 3; i <= n ; i++) {
+		ascii[i] = hex_asc_lo(reg >> 28);
+		reg <<= 4;
+	}
+	early_shadow_write(NULL, ascii, n);
+
+}
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index f826f6b9f91..66910121fa6 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -153,6 +153,8 @@ ENTRY(__start)
 
 #ifdef CONFIG_EARLY_PRINTK
 	call _init_early_exception_vectors;
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+	sti r0;
 #endif
 
 	r0 = 0 (x);
@@ -212,12 +214,21 @@ ENTRY(__start)
 	[p0] = p1;
 	csync;
 
+#ifdef CONFIG_EARLY_PRINTK
+	r0 = (EVT_IVG15 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU) (z);
+#else
 	r0 = EVT_IVG15 (z);
+#endif
 	sti r0;
 
 	raise 15;
+#ifdef CONFIG_EARLY_PRINTK
+	p0.l = _early_trap;
+	p0.h = _early_trap;
+#else
 	p0.l = .LWAIT_HERE;
 	p0.h = .LWAIT_HERE;
+#endif
 	reti = p0;
 #if ANOMALY_05000281
 	nop; nop; nop;
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 68bd0bd680c..b88ce7fda54 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -33,6 +33,7 @@
 #include <asm/bfin-global.h>
 #include <asm/pda.h>
 #include <asm/cplbinit.h>
+#include <asm/early_printk.h>
 #include "blackfin_sram.h"
 
 /*
@@ -113,6 +114,8 @@ asmlinkage void __init init_pda(void)
 {
 	unsigned int cpu = raw_smp_processor_id();
 
+	early_shadow_stamp();
+
 	/* Initialize the PDA fields holding references to other parts
 	   of the memory. The content of such memory is still
 	   undefined at the time of the call, we are only setting up
-- 
cgit v1.2.3


From a2f78cfc656e3013e5024460a7b8a0b3dde456d3 Mon Sep 17 00:00:00 2001
From: Stefan Pledl <stefan.pledl@mesutronic.de>
Date: Sat, 11 Jul 2009 13:50:42 +0200
Subject: Blackfin: fix BF548 UART0 DMA IRQ translation

The initial BF54x port included some defines to keep code simple across
different processors, but it just ended up causing the UART0 DMA IRQs to
be set to the UART1 channels.

Signed-off-by: Stefan Pledl <stefan.pledl@mesutronic.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf548/dma.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index 535980652bf..d9239bc05dd 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -91,16 +91,16 @@ int channel2irq(unsigned int channel)
 		ret_irq = IRQ_SPI1;
 		break;
 	case CH_UART0_RX:
-		ret_irq = IRQ_UART_RX;
+		ret_irq = IRQ_UART0_RX;
 		break;
 	case CH_UART0_TX:
-		ret_irq = IRQ_UART_TX;
+		ret_irq = IRQ_UART0_TX;
 		break;
 	case CH_UART1_RX:
-		ret_irq = IRQ_UART_RX;
+		ret_irq = IRQ_UART1_RX;
 		break;
 	case CH_UART1_TX:
-		ret_irq = IRQ_UART_TX;
+		ret_irq = IRQ_UART1_TX;
 		break;
 	case CH_EPPI0:
 		ret_irq = IRQ_EPPI0;
-- 
cgit v1.2.3


From f41e2fded031cd8f3c0430687fa6b35ca0589088 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Mon, 13 Jul 2009 04:16:42 +0000
Subject: Blackfin: bf538: add bfin_clear_PPI_STATUS() helper

Add the bf538 version of bfin_clear_PPI_STATUS() to match all other ports.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf538/include/mach/cdefBF538.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 99ca3f4305e..1de67515dc9 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -1310,6 +1310,7 @@
 #define bfin_write_PPI_CONTROL(val)    bfin_write16(PPI_CONTROL, val)
 #define bfin_read_PPI_STATUS()         bfin_read16(PPI_STATUS)
 #define bfin_write_PPI_STATUS(val)     bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS()        bfin_read_PPI_STATUS()
 #define bfin_read_PPI_DELAY()          bfin_read16(PPI_DELAY)
 #define bfin_write_PPI_DELAY(val)      bfin_write16(PPI_DELAY, val)
 #define bfin_read_PPI_COUNT()          bfin_read16(PPI_COUNT)
-- 
cgit v1.2.3


From 2120b68f31d3b08be99010b3992f58f07794b8b0 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Thu, 16 Jul 2009 10:12:30 +0000
Subject: Blackfin: bf533-stamp: add resources for mmc_spi card

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf533/boards/stamp.c | 40 +++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 42d4c9fcc12..e6548a62394 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -35,6 +35,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
@@ -223,6 +224,34 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+static int bfin_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+		"mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+	.init = bfin_mmc_spi_init,
+	.exit = bfin_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+	.pio_interrupt = 0,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 	{
@@ -286,6 +315,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &spidev_chip_info,
 	},
 #endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.platform_data = &bfin_mmc_spi_pdata,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-- 
cgit v1.2.3


From 407505dc01ac2b4f2944cd3c6a0c02473ffb869e Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Thu, 16 Jul 2009 10:36:35 +0000
Subject: Blackfin: do not try displaying the end of the stack

The end of the stack may not be valid (and that could be OK), so do not
attempt to parse it.  If we do, we might use a bad pointer in kernel space
which makes things panic().

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 519accaf4af..18c6cd4150f 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -911,7 +911,7 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 		frame_no = 0;
 
 		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		     addr <= endstack; addr++, i++) {
+		     addr < endstack; addr++, i++) {
 
 			ret_addr = 0;
 			if (!j && i % 8 == 0)
-- 
cgit v1.2.3


From 427f277e5f472b6c1bc444ef5f7d30ebe280420e Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Fri, 17 Jul 2009 07:04:55 +0000
Subject: Blackfin: bf537-stamp: update AD714x resources

Push the device table to the board resources as data interpretation can be
changed on a per-board basis.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 133 +++++++++++++++++++++++++++++++-
 1 file changed, 131 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 72d11de3047..e5fffe7e84c 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -540,6 +540,120 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static struct ad714x_slider_plat slider_plat[] = {
+	{
+		.start_stage = 0,
+		.end_stage = 7,
+		.max_coord = 128,
+	},
+};
+
+static struct ad714x_button_plat button_plat[] = {
+	{
+		.keycode = BTN_FORWARD,
+		.l_mask = 0,
+		.h_mask = 0x600,
+	},
+	{
+		.keycode = BTN_LEFT,
+		.l_mask = 0,
+		.h_mask = 0x500,
+	},
+	{
+		.keycode = BTN_MIDDLE,
+		.l_mask = 0,
+		.h_mask = 0x800,
+	},
+	{
+		.keycode = BTN_RIGHT,
+		.l_mask = 0x100,
+		.h_mask = 0x400,
+	},
+	{
+		.keycode = BTN_BACK,
+		.l_mask = 0x200,
+		.h_mask = 0x400,
+	},
+};
+static struct ad714x_platform_data ad7147_platfrom_data = {
+	.slider_num = 1,
+	.button_num = 5,
+	.slider = slider_plat,
+	.button = button_plat,
+	.stage_cfg_reg =  {
+		{0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
+		{0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
+		{0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
+		{0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
+		{0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
+	},
+	.sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
+};
+#endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
+#include <linux/input.h>
+#include <linux/input/ad714x.h>
+static struct ad714x_button_plat button_plat[] = {
+	{
+		.keycode = BTN_1,
+		.l_mask = 0,
+		.h_mask = 0x1,
+	},
+	{
+		.keycode = BTN_2,
+		.l_mask = 0,
+		.h_mask = 0x2,
+	},
+	{
+		.keycode = BTN_3,
+		.l_mask = 0,
+		.h_mask = 0x4,
+	},
+	{
+		.keycode = BTN_4,
+		.l_mask = 0x0,
+		.h_mask = 0x8,
+	},
+};
+static struct ad714x_platform_data ad7142_platfrom_data = {
+	.button_num = 4,
+	.button = button_plat,
+	.stage_cfg_reg =  {
+		/* fixme: figure out right setting for all comoponent according
+		 * to hardware feature of EVAL-AD7142EB board */
+		{0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+		{0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
+	},
+	.sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
+};
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 
@@ -784,6 +898,20 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
+
+#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+	{
+		.modalias = "ad714x_captouch",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF4,
+		.bus_num = 0,
+		.chip_select = 5,
+		.mode = SPI_MODE_3,
+		.platform_data = &ad7147_platfrom_data,
+		.controller_data = &ad7147_spi_chip_info,
+	},
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -1337,10 +1465,11 @@ static struct adp5520_platform_data adp5520_pdev_data = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+#if defined(CONFIG_INPUT_EVAL_AD7142EB)
 	{
-		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
+		I2C_BOARD_INFO("ad7142_captouch", 0x2C),
 		.irq = IRQ_PG5,
+		.platform_data = (void *)&ad7142_platfrom_data,
 	},
 #endif
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
-- 
cgit v1.2.3


From 8fc4dd9e876cbda4dfe09ca85e4e1520b36dce77 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Sat, 18 Jul 2009 16:54:03 +0200
Subject: Blackfin: clean up duplicate I2C device type definitions

I2C_BOARD_INFO() already sets .type, no need to set it again.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf527/boards/cm_bf527.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 3a620666bb8..85f9ac56c6c 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -796,13 +796,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-		.type = "pcf8574_lcd",
 	},
 #endif
 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.type = "pcf8574_keypad",
 		.irq = IRQ_PF8,
 	},
 #endif
-- 
cgit v1.2.3


From 36b841288656b9b30b5d2add2fd136ac7eab5867 Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Tue, 21 Jul 2009 02:26:57 +0000
Subject: Blackfin: fix MPU handling of invalid memory accesses

The protect_page() function was incorrectly setting up the hardware tables
based on possible access capabilities rather than the actual requested
values.  This means we would grant more access to mmap-ed pages than we
should have.  Once we fix this, we need to tweak the signal generated by
such accesses to aline ourselves with other ports.  This allows the LTP
mmap0{5,6,7} cases to run properly.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/mmu_context.h | 6 +++---
 arch/blackfin/kernel/traps.c            | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index 944e29faae4..040410bb07e 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -127,17 +127,17 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr,
 	unsigned long idx = page >> 5;
 	unsigned long bit = 1 << (page & 31);
 
-	if (flags & VM_MAYREAD)
+	if (flags & VM_READ)
 		mask[idx] |= bit;
 	else
 		mask[idx] &= ~bit;
 	mask += page_mask_nelts;
-	if (flags & VM_MAYWRITE)
+	if (flags & VM_WRITE)
 		mask[idx] |= bit;
 	else
 		mask[idx] &= ~bit;
 	mask += page_mask_nelts;
-	if (flags & VM_MAYEXEC)
+	if (flags & VM_EXEC)
 		mask[idx] |= bit;
 	else
 		mask[idx] &= ~bit;
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 18c6cd4150f..644e35e3355 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -411,7 +411,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	/* 0x23 - Data CPLB protection violation, handled here */
 	case VEC_CPLB_VL:
 		info.si_code = ILL_CPLB_VI;
-		sig = SIGBUS;
+		sig = SIGSEGV;
 		strerror = KERN_NOTICE EXC_0x23(KERN_NOTICE);
 		CHK_DEBUGGER_TRAP_MAYBE();
 		break;
-- 
cgit v1.2.3


From 858c5e9abc5c614b2eceb6a361118f31821ac968 Mon Sep 17 00:00:00 2001
From: Cliff Cai <cliff.cai@analog.com>
Date: Wed, 22 Jul 2009 06:34:55 +0000
Subject: Blackfin: bf533-stamp: fix typo in SPI frequency for ad1836 codec

One too many zeros means we run way faster than the codec can handle.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf533/boards/stamp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index e6548a62394..7a7b656216c 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -280,7 +280,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
 		.modalias = "ad1836-spi",
-		.max_speed_hz = 31250000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 		.controller_data = &ad1836_spi_chip_info,
-- 
cgit v1.2.3


From 01b9f4b0ed3b1111b2080a3c9bcb66df1fdf48b7 Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Wed, 22 Jul 2009 11:56:24 +0000
Subject: Blackfin: improve double fault debug handling

Since the hardware only provides reporting for the last exception handled,
and the values are valid only when executing the exception handler, we
need to save the context for reporting at a later point.  While we do this
for one exception, it doesn't work properly when handling a second one as
the original exception is clobbered by the double fault.  So when double
fault debugging is enabled, create a dedicated shadow of these values and
save/restore out of there.  Now the crash report properly displays the
first exception as well as the second one.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/pda.h      |  6 ++++++
 arch/blackfin/kernel/asm-offsets.c   |  6 ++++++
 arch/blackfin/kernel/traps.c         |  8 ++++----
 arch/blackfin/mach-bf561/secondary.S |  8 ++++----
 arch/blackfin/mach-common/entry.S    | 22 +++++++++++++---------
 arch/blackfin/mach-common/head.S     |  8 ++++----
 6 files changed, 37 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index 69b96b40c18..a6f95695731 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -61,6 +61,12 @@ struct blackfin_pda {			/* Per-processor Data Area */
 	unsigned long retx;
 	unsigned long seqstat;
 	unsigned int __nmi_count;	/* number of times NMI asserted on this CPU */
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	unsigned long dcplb_doublefault_addr;
+	unsigned long icplb_doublefault_addr;
+	unsigned long retx_doublefault;
+	unsigned long seqstat_doublefault;
+#endif
 };
 
 extern struct blackfin_pda cpu_pda[];
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c
index 8ad4f2c6996..f05d1b99b0e 100644
--- a/arch/blackfin/kernel/asm-offsets.c
+++ b/arch/blackfin/kernel/asm-offsets.c
@@ -153,6 +153,12 @@ int main(void)
 	DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr));
 	DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx));
 	DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat));
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+	DEFINE(PDA_DF_DCPLB, offsetof(struct blackfin_pda, dcplb_doublefault_addr));
+	DEFINE(PDA_DF_ICPLB, offsetof(struct blackfin_pda, icplb_doublefault_addr));
+	DEFINE(PDA_DF_SEQSTAT, offsetof(struct blackfin_pda, seqstat_doublefault));
+	DEFINE(PDA_DF_RETX, offsetof(struct blackfin_pda, retx_doublefault));
+#endif
 #ifdef CONFIG_SMP
 	/* Inter-core lock (in L2 SRAM) */
 	DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot));
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 644e35e3355..0904430d413 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -229,12 +229,12 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
 		unsigned int cpu = smp_processor_id();
 		char buf[150];
-		decode_address(buf, cpu_pda[cpu].retx);
+		decode_address(buf, cpu_pda[cpu].retx_doublefault);
 		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
-			(unsigned int)cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE, buf);
-		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
+			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
 		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
 		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
 
 		decode_address(buf, fp->retx);
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index 35280f06b7b..097550f7b55 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -126,22 +126,22 @@ ENTRY(_coreb_trampoline_start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r7 = [p0 + PDA_RETX];
+	r7 = [p0 + PDA_DF_RETX];
 	p1.l = _init_saved_retx_coreb;
 	p1.h = _init_saved_retx_coreb;
 	[p1] = r7;
 
-	r7 = [p0 + PDA_DCPLB];
+	r7 = [p0 + PDA_DF_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr_coreb;
 	p1.h = _init_saved_dcplb_fault_addr_coreb;
 	[p1] = r7;
 
-	r7 = [p0 + PDA_ICPLB];
+	r7 = [p0 + PDA_DF_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr_coreb;
 	p1.h = _init_saved_icplb_fault_addr_coreb;
 	[p1] = r7;
 
-	r7 = [p0 + PDA_SEQSTAT];
+	r7 = [p0 + PDA_DF_SEQSTAT];
 	p1.l = _init_saved_seqstat_coreb;
 	p1.h = _init_saved_seqstat_coreb;
 	[p1] = r7;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index cbc5b6d1ed0..4e8e3fe0ba1 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -326,8 +326,6 @@ ENTRY(_ex_trap_c)
 	[p4] = r7;
 	csync;
 
-#ifndef CONFIG_DEBUG_DOUBLEFAULT
-
 	/*
 	 * Save these registers, as they are only valid in exception context
 	 *  (where we are now - as soon as we defer to IRQ5, they can change)
@@ -347,7 +345,10 @@ ENTRY(_ex_trap_c)
 
 	r6 = retx;
 	[p5 + PDA_RETX] = r6;
-#endif
+
+	r6 = SEQSTAT;
+	[p5 + PDA_SEQSTAT] = r6;
+
 	/* Save the state of single stepping */
 	r6 = SYSCFG;
 	[p5 + PDA_SYSCFG] = r6;
@@ -444,6 +445,9 @@ ENTRY(_exception_to_level5)
 	r6 = [p5 + PDA_SYSCFG];
 	[sp + PT_SYSCFG] = r6;
 
+	r6 = [p5 + PDA_SEQSTAT]; /* Read back seqstat */
+	[sp + PT_SEQSTAT] = r6;
+
 	/* Restore the hardware error vector.  */
 	r7.h = _evt_ivhw;
 	r7.l = _evt_ivhw;
@@ -496,7 +500,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	 */
 	EX_SCRATCH_REG = sp;
 	GET_PDA_SAFE(sp);
-	sp = [sp + PDA_EXSTACK]
+	sp = [sp + PDA_EXSTACK];
 	/* Try to deal with syscalls quickly.  */
 	[--sp] = ASTAT;
 	[--sp] = (R7:6,P5:4);
@@ -532,18 +536,18 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	p4.l = lo(DCPLB_FAULT_ADDR);
 	p4.h = hi(DCPLB_FAULT_ADDR);
 	r7 = [p4];
-	[p5 + PDA_DCPLB] = r7;
+	[p5 + PDA_DF_DCPLB] = r7;
 
 	p4.l = lo(ICPLB_FAULT_ADDR);
 	p4.h = hi(ICPLB_FAULT_ADDR);
 	r7 = [p4];
-	[p5 + PDA_ICPLB] = r7;
+	[p5 + PDA_DF_ICPLB] = r7;
 
-	r6 = retx;
-	[p5 + PDA_RETX] = r6;
+	r7 = retx;
+	[p5 + PDA_DF_RETX] = r7;
 
 	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
-	[p5 + PDA_SEQSTAT] = r7;
+	[p5 + PDA_DF_SEQSTAT] = r7;
 #else
 	r7 = SEQSTAT;           /* reason code is in bit 5:0 */
 #endif
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 66910121fa6..9c79dfea2a5 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -124,22 +124,22 @@ ENTRY(__start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r6 = [p0 + PDA_RETX];
+	r6 = [p0 + PDA_DF_RETX];
 	p1.l = _init_saved_retx;
 	p1.h = _init_saved_retx;
 	[p1] = r6;
 
-	r6 = [p0 + PDA_DCPLB];
+	r6 = [p0 + PDA_DF_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr;
 	p1.h = _init_saved_dcplb_fault_addr;
 	[p1] = r6;
 
-	r6 = [p0 + PDA_ICPLB];
+	r6 = [p0 + PDA_DF_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr;
 	p1.h = _init_saved_icplb_fault_addr;
 	[p1] = r6;
 
-	r6 = [p0 + PDA_SEQSTAT];
+	r6 = [p0 + PDA_DF_SEQSTAT];
 	p1.l = _init_saved_seqstat;
 	p1.h = _init_saved_seqstat;
 	[p1] = r6;
-- 
cgit v1.2.3


From 2fff7f8800e3567adf74e29b91ad192761d8fb3c Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 23 Jul 2009 04:20:48 +0000
Subject: Blackfin: bf537-stamp: drop ATA interrupt probe workaround

The interrupt probe workaround doesn't work without hacks to common code,
and the add-on card only needs a simple resistor to fix the problem, so
drop the board-specific hack.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index e5fffe7e84c..192e34ea3f2 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1728,11 +1728,6 @@ static int __init stamp_init(void)
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
-#if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
-	 && defined(PATA_INT)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 61f09b5a09fb3962bbd3990a9a5a8470197955bb Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Fri, 24 Jul 2009 08:48:31 +0000
Subject: Blackfin: convert boards to use platform data with smc91x

Latest smc91x driver allows you to specify settings in board resources
rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf527/boards/cm_bf527.c   | 11 +++++++++++
 arch/blackfin/mach-bf527/boards/ezkit.c      | 11 +++++++++++
 arch/blackfin/mach-bf533/boards/H8606.c      | 11 +++++++++++
 arch/blackfin/mach-bf533/boards/blackstamp.c | 11 +++++++++++
 arch/blackfin/mach-bf533/boards/cm_bf533.c   | 11 +++++++++++
 arch/blackfin/mach-bf533/boards/ezkit.c      | 11 +++++++++++
 arch/blackfin/mach-bf533/boards/stamp.c      | 11 +++++++++++
 arch/blackfin/mach-bf537/boards/cm_bf537.c   | 11 +++++++++++
 arch/blackfin/mach-bf537/boards/pnav10.c     | 11 +++++++++++
 arch/blackfin/mach-bf537/boards/stamp.c      | 11 +++++++++++
 arch/blackfin/mach-bf537/boards/tcm_bf537.c  | 11 +++++++++++
 arch/blackfin/mach-bf538/boards/ezkit.c      | 11 +++++++++++
 arch/blackfin/mach-bf561/boards/cm_bf561.c   | 10 ++++++++++
 arch/blackfin/mach-bf561/boards/ezkit.c      | 11 +++++++++++
 14 files changed, 153 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 85f9ac56c6c..cb360e99f1d 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -275,6 +275,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -293,6 +301,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index b843d0e3f67..617a2873843 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -292,6 +292,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -310,6 +318,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 38cf8ffd6d7..1bd8b61e688 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -88,6 +88,14 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 9ecdc361fa6..8208d67e2c9 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -48,6 +48,14 @@ static struct platform_device rtc_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -66,6 +74,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 1443e92d8b6..705256837a0 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -195,6 +195,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.start = 0x20200300,
@@ -211,6 +219,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 4e3e511bf14..88b2dfc74d2 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -67,6 +67,14 @@ static struct platform_device bfin_fb_adv7393_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -84,6 +92,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 7a7b656216c..f3dc2830631 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -63,6 +63,14 @@ static struct platform_device rtc_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -81,6 +89,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 2a87d1cfcd0..3681d2cb40b 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -223,6 +223,14 @@ static struct platform_device hitachi_fb_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.start = 0x20200300,
@@ -240,6 +248,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 838240f151f..3bbe10227bf 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -92,6 +92,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -110,6 +118,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 192e34ea3f2..313249e6c94 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -171,6 +171,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -189,6 +197,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index e523e6e610d..97a86b4ce96 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -223,6 +223,14 @@ static struct platform_device hitachi_fb_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.start = 0x20200300,
@@ -240,6 +248,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 57695b4c3c0..42297fad46b 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -177,6 +177,14 @@ static struct platform_device bfin_sir2_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -194,6 +202,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 0c9d72c5f5b..ebb07554fb0 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -213,6 +213,13 @@ static struct platform_device hitachi_fb_device = {
 
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
 
 static struct resource smc91x_resources[] = {
 	{
@@ -231,6 +238,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 4df904f9e90..10edc998beb 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -147,6 +147,14 @@ static struct platform_device net2272_bfin_device = {
  *  Driver needs to know address, irq and flag pin.
  */
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_32BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -166,6 +174,9 @@ static struct platform_device smc91x_device = {
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smc91x_resources),
 	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 #endif
 
-- 
cgit v1.2.3


From 8d71e075966e29232cd38d8ca6335047a164c1dc Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 27 Jul 2009 00:44:25 +0000
Subject: Blackfin: drop unused MMR defines that only cause bad code to be
 written

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf518/include/mach/blackfin.h   | 10 ---
 arch/blackfin/mach-bf527/include/mach/blackfin.h   | 10 ---
 arch/blackfin/mach-bf533/dma.c                     |  8 +-
 .../mach-bf533/include/mach/bfin_serial_5xx.h      |  8 +-
 arch/blackfin/mach-bf533/include/mach/blackfin.h   |  7 --
 arch/blackfin/mach-bf537/dma.c                     |  8 +-
 arch/blackfin/mach-bf537/include/mach/blackfin.h   | 90 ----------------------
 arch/blackfin/mach-bf538/include/mach/blackfin.h   | 10 ---
 arch/blackfin/mach-bf548/include/mach/blackfin.h   | 89 ---------------------
 9 files changed, 12 insertions(+), 228 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index e8e14c2769e..83421d39314 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -68,11 +68,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
 #define BFIN_UART_NR_PORTS	2
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -88,11 +83,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 03665a8e16b..ea9cb0fef8b 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -56,11 +56,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
 #define BFIN_UART_NR_PORTS	2
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -76,11 +71,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf533/dma.c b/arch/blackfin/mach-bf533/dma.c
index 0a6eb8f24d9..7a443c37fb9 100644
--- a/arch/blackfin/mach-bf533/dma.c
+++ b/arch/blackfin/mach-bf533/dma.c
@@ -76,12 +76,12 @@ int channel2irq(unsigned int channel)
 		ret_irq = IRQ_SPI;
 		break;
 
-	case CH_UART_RX:
-		ret_irq = IRQ_UART_RX;
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
 		break;
 
-	case CH_UART_TX:
-		ret_irq = IRQ_UART_TX;
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
 		break;
 
 	case CH_MEM_STREAM0_SRC:
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 4062e24e759..6965b4088c4 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -131,11 +131,11 @@ struct bfin_serial_res {
 struct bfin_serial_res bfin_serial_resource[] = {
 	{
 	0xFFC00400,
-	IRQ_UART_RX,
-	IRQ_UART_ERROR,
+	IRQ_UART0_RX,
+	IRQ_UART0_ERROR,
 #ifdef CONFIG_SERIAL_BFIN_DMA
-	CH_UART_TX,
-	CH_UART_RX,
+	CH_UART0_TX,
+	CH_UART0_RX,
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index 39aa175f19f..499e897a4f4 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -43,13 +43,6 @@
 
 #define BFIN_UART_NR_PORTS      1
 
-#define CH_UART_RX CH_UART0_RX
-#define CH_UART_TX CH_UART0_TX
-
-#define IRQ_UART_ERROR IRQ_UART0_ERROR
-#define IRQ_UART_RX    IRQ_UART0_RX
-#define IRQ_UART_TX    IRQ_UART0_TX
-
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
 #define OFFSET_RBR              0x00	/* Receive Buffer register              */
 #define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c
index 81185051de9..d23fc0edf2b 100644
--- a/arch/blackfin/mach-bf537/dma.c
+++ b/arch/blackfin/mach-bf537/dma.c
@@ -96,12 +96,12 @@ int channel2irq(unsigned int channel)
 		ret_irq = IRQ_SPI;
 		break;
 
-	case CH_UART_RX:
-		ret_irq = IRQ_UART_RX;
+	case CH_UART0_RX:
+		ret_irq = IRQ_UART0_RX;
 		break;
 
-	case CH_UART_TX:
-		ret_irq = IRQ_UART_TX;
+	case CH_UART0_TX:
+		ret_irq = IRQ_UART0_TX;
 		break;
 
 	case CH_MEM_STREAM0_SRC:
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index f5e5015ad83..9ee8834c8f1 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -45,96 +45,11 @@
 #if !defined(__ASSEMBLY__)
 #include "cdefBF534.h"
 
-/* UART 0*/
-#define bfin_read_UART_THR() bfin_read_UART0_THR()
-#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
-#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
-#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define bfin_read_UART_IER() bfin_read_UART0_IER()
-#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
-#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
-#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
-#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
-#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
-#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
-#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
-#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-
 #if defined(CONFIG_BF537) || defined(CONFIG_BF536)
 #include "cdefBF537.h"
 #endif
 #endif
 
-/* MAP used DEFINES from BF533 to BF537 - so we don't need to change them in the driver, kernel, etc. */
-
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
-/* DMA Channel */
-#define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
-#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
-#define CH_UART_RX CH_UART0_RX
-#define bfin_read_CH_UART_TX() bfin_read_CH_UART0_TX()
-#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART0_TX(val)
-#define CH_UART_TX CH_UART0_TX
-
-/* System Interrupt Controller */
-#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART0_RX()
-#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART0_RX(val)
-#define IRQ_UART_RX IRQ_UART0_RX
-#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART0_TX()
-#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART0_TX(val)
-#define	IRQ_UART_TX IRQ_UART0_TX
-#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART0_ERROR()
-#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART0_ERROR(val)
-#define	IRQ_UART_ERROR IRQ_UART0_ERROR
-
-/* MMR Registers*/
-#define bfin_read_UART_THR() bfin_read_UART0_THR()
-#define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define BFIN_UART_THR UART0_THR
-#define bfin_read_UART_RBR() bfin_read_UART0_RBR()
-#define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define BFIN_UART_RBR UART0_RBR
-#define bfin_read_UART_DLL() bfin_read_UART0_DLL()
-#define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define BFIN_UART_DLL UART0_DLL
-#define bfin_read_UART_IER() bfin_read_UART0_IER()
-#define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define BFIN_UART_IER UART0_IER
-#define bfin_read_UART_DLH() bfin_read_UART0_DLH()
-#define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define BFIN_UART_DLH UART0_DLH
-#define bfin_read_UART_IIR() bfin_read_UART0_IIR()
-#define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define BFIN_UART_IIR UART0_IIR
-#define bfin_read_UART_LCR() bfin_read_UART0_LCR()
-#define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define BFIN_UART_LCR UART0_LCR
-#define bfin_read_UART_MCR() bfin_read_UART0_MCR()
-#define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define BFIN_UART_MCR UART0_MCR
-#define bfin_read_UART_LSR() bfin_read_UART0_LSR()
-#define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define BFIN_UART_LSR UART0_LSR
-#define bfin_read_UART_SCR() bfin_read_UART0_SCR()
-#define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define BFIN_UART_SCR  UART0_SCR
-#define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
-#define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-#define BFIN_UART_GCTL UART0_GCTL
-
 #define BFIN_UART_NR_PORTS	2
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -150,11 +65,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 9496196ac16..5ecee169095 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -47,11 +47,6 @@
 #endif
 #endif
 
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
 #define BFIN_UART_NR_PORTS	3
 
 #define OFFSET_THR              0x00	/* Transmit Holding register            */
@@ -67,11 +62,6 @@
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
 #define OFFSET_GCTL             0x24	/* Global Control Register              */
 
-/* DPMC*/
-#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
-#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
-#define STOPCK_OFF STOPCK
-
 /* PLL_DIV Masks													*/
 #define CCLK_DIV1 CSEL_DIV1	/*          CCLK = VCO / 1                                  */
 #define CCLK_DIV2 CSEL_DIV2	/*          CCLK = VCO / 2                                  */
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 6b97396d817..318667b2f03 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -72,97 +72,8 @@
 #include "cdefBF549.h"
 #endif
 
-/* UART 1*/
-#define bfin_read_UART_THR()		bfin_read_UART1_THR()
-#define bfin_write_UART_THR(val)	bfin_write_UART1_THR(val)
-#define bfin_read_UART_RBR()		bfin_read_UART1_RBR()
-#define bfin_write_UART_RBR(val)	bfin_write_UART1_RBR(val)
-#define bfin_read_UART_DLL()		bfin_read_UART1_DLL()
-#define bfin_write_UART_DLL(val)	bfin_write_UART1_DLL(val)
-#define bfin_read_UART_IER()		bfin_read_UART1_IER()
-#define bfin_write_UART_IER(val)	bfin_write_UART1_IER(val)
-#define bfin_read_UART_DLH()		bfin_read_UART1_DLH()
-#define bfin_write_UART_DLH(val)	bfin_write_UART1_DLH(val)
-#define bfin_read_UART_IIR()		bfin_read_UART1_IIR()
-#define bfin_write_UART_IIR(val)	bfin_write_UART1_IIR(val)
-#define bfin_read_UART_LCR()		bfin_read_UART1_LCR()
-#define bfin_write_UART_LCR(val)	bfin_write_UART1_LCR(val)
-#define bfin_read_UART_MCR()		bfin_read_UART1_MCR()
-#define bfin_write_UART_MCR(val)	bfin_write_UART1_MCR(val)
-#define bfin_read_UART_LSR()		bfin_read_UART1_LSR()
-#define bfin_write_UART_LSR(val)	bfin_write_UART1_LSR(val)
-#define bfin_read_UART_SCR()		bfin_read_UART1_SCR()
-#define bfin_write_UART_SCR(val)	bfin_write_UART1_SCR(val)
-#define bfin_read_UART_GCTL()		bfin_read_UART1_GCTL()
-#define bfin_write_UART_GCTL(val)	bfin_write_UART1_GCTL(val)
-
 #endif
 
-/* MAP used DEFINES from BF533 to BF54x - so we don't need to change 
- * them in the driver, kernel, etc. */
-
-/* UART_IIR Register */
-#define STATUS(x)	((x << 1) & 0x06)
-#define STATUS_P1	0x02
-#define STATUS_P0	0x01
-
-/* UART 0*/
-
-/* DMA Channel */
-#define bfin_read_CH_UART_RX()		bfin_read_CH_UART1_RX()
-#define bfin_write_CH_UART_RX(val)	bfin_write_CH_UART1_RX(val)
-#define bfin_read_CH_UART_TX()		bfin_read_CH_UART1_TX()
-#define bfin_write_CH_UART_TX(val)	bfin_write_CH_UART1_TX(val)
-#define CH_UART_RX			CH_UART1_RX
-#define CH_UART_TX			CH_UART1_TX
-
-/* System Interrupt Controller */
-#define bfin_read_IRQ_UART_RX()		bfin_read_IRQ_UART1_RX()
-#define bfin_write_IRQ_UART_RX(val)	bfin_write_IRQ_UART1_RX(val)
-#define bfin_read_IRQ_UART_TX()		bfin_read_IRQ_UART1_TX()
-#define bfin_write_IRQ_UART_TX(val)	bfin_write_IRQ_UART1_TX(val)
-#define bfin_read_IRQ_UART_ERROR()	bfin_read_IRQ_UART1_ERROR()
-#define bfin_write_IRQ_UART_ERROR(val)	bfin_write_IRQ_UART1_ERROR(val)
-#define IRQ_UART_RX			IRQ_UART1_RX
-#define	IRQ_UART_TX			IRQ_UART1_TX
-#define	IRQ_UART_ERROR			IRQ_UART1_ERROR
-
-/* MMR Registers*/
-#define bfin_read_UART_THR()		bfin_read_UART1_THR()
-#define bfin_write_UART_THR(val)	bfin_write_UART1_THR(val)
-#define bfin_read_UART_RBR()		bfin_read_UART1_RBR()
-#define bfin_write_UART_RBR(val)	bfin_write_UART1_RBR(val)
-#define bfin_read_UART_DLL()		bfin_read_UART1_DLL()
-#define bfin_write_UART_DLL(val)	bfin_write_UART1_DLL(val)
-#define bfin_read_UART_IER()		bfin_read_UART1_IER()
-#define bfin_write_UART_IER(val)	bfin_write_UART1_IER(val)
-#define bfin_read_UART_DLH()		bfin_read_UART1_DLH()
-#define bfin_write_UART_DLH(val)	bfin_write_UART1_DLH(val)
-#define bfin_read_UART_IIR()		bfin_read_UART1_IIR()
-#define bfin_write_UART_IIR(val)	bfin_write_UART1_IIR(val)
-#define bfin_read_UART_LCR()		bfin_read_UART1_LCR()
-#define bfin_write_UART_LCR(val)	bfin_write_UART1_LCR(val)
-#define bfin_read_UART_MCR()		bfin_read_UART1_MCR()
-#define bfin_write_UART_MCR(val)	bfin_write_UART1_MCR(val)
-#define bfin_read_UART_LSR()		bfin_read_UART1_LSR()
-#define bfin_write_UART_LSR(val)	bfin_write_UART1_LSR(val)
-#define bfin_read_UART_SCR()		bfin_read_UART1_SCR()
-#define bfin_write_UART_SCR(val)	bfin_write_UART1_SCR(val)
-#define bfin_read_UART_GCTL()		bfin_read_UART1_GCTL()
-#define bfin_write_UART_GCTL(val)	bfin_write_UART1_GCTL(val)
-
-#define BFIN_UART_THR			UART1_THR
-#define BFIN_UART_RBR			UART1_RBR
-#define BFIN_UART_DLL			UART1_DLL
-#define BFIN_UART_IER			UART1_IER
-#define BFIN_UART_DLH			UART1_DLH
-#define BFIN_UART_IIR			UART1_IIR
-#define BFIN_UART_LCR			UART1_LCR
-#define BFIN_UART_MCR			UART1_MCR
-#define BFIN_UART_LSR			UART1_LSR
-#define BFIN_UART_SCR			UART1_SCR
-#define BFIN_UART_GCTL			UART1_GCTL
-
 #define BFIN_UART_NR_PORTS	4
 
 #define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
-- 
cgit v1.2.3


From b3dec4a4ff495248170358cb3b8254a814e5b096 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Mon, 27 Jul 2009 06:42:50 +0000
Subject: Blackfin: cm-bf527/bf537-stamp: fix dm9000 resources

The dm9000 driver expects two IORESOURCE_MEM to get at the device, so make
sure we declare things properly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf527/boards/cm_bf527.c | 7 ++++++-
 arch/blackfin/mach-bf537/boards/stamp.c    | 7 ++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index cb360e99f1d..18b9bd7d7d6 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -311,10 +311,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB804,
+		.end	= 0x203FB804 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 313249e6c94..9b67006ec84 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -207,10 +207,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB804,
+		.end	= 0x203FB804 + 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-- 
cgit v1.2.3


From 0e101ec12e68f25dd769a4b7ecb5e7ead0aae7c0 Mon Sep 17 00:00:00 2001
From: Stefan Pledl <stefan.pledl@mesutronic.de>
Date: Wed, 29 Jul 2009 08:09:45 +0000
Subject: Blackfin: bf548-ezkit: fix incorrect LCD size parameters

I think we have to use the physical dimensions [mm] of the display for
.width and .heigth in struct bfin_bf54xfb_mach_info bf54x_lq043_data which
are copied to fbinfo->var.height/.width in bf54x-lq043fb.c.

linux/fb.h describes this values as 'height/weight of picture in mm'

Otherwise QT calcs the wrong dpi value and the displayed fonts are very
small.

Signed-off-by: Stefan Pledl <stefan.pledl@mesutronic.de>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf548/boards/ezkit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index aa82836ebc7..3c06010475a 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -99,8 +99,8 @@ static struct platform_device bfin_isp1760_device = {
 #include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
-	.width =	480,
-	.height =	272,
+	.width =	95,
+	.height =	54,
 	.xres =		{480, 480, 480},
 	.yres =		{272, 272, 272},
 	.bpp =		{24, 24, 24},
-- 
cgit v1.2.3


From ac860751eb2cb1bdf8bb341d849b38c483f5d83b Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sun, 2 Aug 2009 14:26:48 +0200
Subject: Blackfin: fix read buffer overflow

Check whether index is within bounds before testing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/bfin_dma_5xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 14dea1a87b7..384868dedac 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -147,8 +147,8 @@ EXPORT_SYMBOL(request_dma);
 
 int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data)
 {
-	BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
-	       && channel < MAX_DMA_CHANNELS));
+	BUG_ON(channel >= MAX_DMA_CHANNELS ||
+			dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
 
 	if (callback != NULL) {
 		int ret;
@@ -182,8 +182,8 @@ static void clear_dma_buffer(unsigned int channel)
 void free_dma(unsigned int channel)
 {
 	pr_debug("freedma() : BEGIN \n");
-	BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
-	       && channel < MAX_DMA_CHANNELS));
+	BUG_ON(channel >= MAX_DMA_CHANNELS ||
+			dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
 
 	/* Halt the DMA */
 	disable_dma(channel);
-- 
cgit v1.2.3


From f1cb64625c4f5309747b8067a309e0bcc630b303 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Mon, 3 Aug 2009 04:40:36 +0000
Subject: Blackfin: bf538-ezkit: add resources for parallel flash

The board has some parallel flash hooked up to the async banks, so add
appropriate physmap resources for it.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf538/boards/ezkit.c | 49 +++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 42297fad46b..9113f60d65f 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -31,6 +31,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -561,6 +562,50 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x180000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	.end   = 0x202fffff,
+#else
+	.end   = 0x203fffff,
+#endif
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
 static struct platform_device *cm_bf538_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -609,6 +654,10 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 
 	&bfin_gpios_device,
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device,
+#endif
 };
 
 static int __init ezkit_init(void)
-- 
cgit v1.2.3


From bd411b15cc4b3f31f67d15e1afffbd1ec650d5b8 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Wed, 5 Aug 2009 10:02:14 +0000
Subject: Blackfin: update anomaly lists

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf518/include/mach/anomaly.h |  1 +
 arch/blackfin/mach-bf527/include/mach/anomaly.h | 13 +++++++++++--
 arch/blackfin/mach-bf537/include/mach/anomaly.h |  2 +-
 arch/blackfin/mach-bf538/include/mach/anomaly.h |  2 +-
 arch/blackfin/mach-bf548/include/mach/anomaly.h | 21 +++++++++++++++++++--
 arch/blackfin/mach-bf561/include/mach/anomaly.h |  2 ++
 6 files changed, 35 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 753ed810e1c..e9c65390edd 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -124,6 +124,7 @@
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000389 (0)
 #define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000447 (0)
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index c438ca89d8c..3f9052687fa 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file should be up to date with:
- *  - Revision C, 03/13/2009; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List
  *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
@@ -176,7 +176,7 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
-/* USB DMA Short Packet Data Corruption */
+/* USB DMA Mode 1 Short Packet Data Corruption */
 #define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
@@ -186,12 +186,20 @@
 #define ANOMALY_05000456 (1)
 /* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
 #define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
 /* USB Rx DMA hang */
 #define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (1)
 /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
 #define ANOMALY_05000467 (1)
+/* PLL Latches Incorrect Settings During Reset */
+#define ANOMALY_05000469 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -238,6 +246,7 @@
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index e66aa131f51..f091ad2d8ea 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -143,7 +143,7 @@
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 2)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index 451cf8a82a4..26b76083e14 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -113,7 +113,7 @@
 /* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */
 #define ANOMALY_05000375 (__SILICON_REVISION__ < 4)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 3)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 /* Speculative Fetches Can Cause Undesired External FIFO Operations */
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index cd040fe0bc5..52b116ae522 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file should be up to date with:
- *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -162,6 +162,8 @@
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
 /* Incorrect Use of Stack in Lockbox Firmware During Authentication */
 #define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
 /* OTP Write Accesses Not Supported */
 #define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
@@ -176,12 +178,26 @@
 #define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
 /* USB DMA Mode 1 Short Packet Data Corruption */
 #define ANOMALY_05000450 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
 /* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
-#define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
+#define ANOMALY_05000456 (1)
+/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
+#define ANOMALY_05000457 (1)
+/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
+#define ANOMALY_05000460 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
+/* USB DMA RX Data Corruption */
+#define ANOMALY_05000463 (1)
+/* USB TX DMA Hang */
+#define ANOMALY_05000464 (1)
 /* USB Rx DMA hang */
 #define ANOMALY_05000465 (1)
+/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
+#define ANOMALY_05000466 (1)
 /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
 #define ANOMALY_05000467 (1)
 
@@ -230,6 +246,7 @@
 #define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
+#define ANOMALY_05000402 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index a5312b2d267..70da495c966 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -262,6 +262,8 @@
 #define ANOMALY_05000366 (1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 4)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 /* TESTSET Instruction Causes Data Corruption with Writeback Data Cache Enabled */
-- 
cgit v1.2.3


From 8312440e05ea74feabc648ad8f36c823af4ddd8e Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 6 Aug 2009 21:03:02 +0000
Subject: Blackfin: bf537-stamp: update ad1836 resources

Update the ad1836 resources for the new ASoC driver.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9b67006ec84..d438ca40bc1 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -532,8 +532,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -883,14 +883,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 	{
 		.modalias = "ad1836-spi",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
 		.controller_data = &ad1836_spi_chip_info,
+		.mode = SPI_MODE_3,
 	},
 #endif
 
@@ -1628,6 +1629,13 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -1733,6 +1741,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&stamp_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
 };
 
 static int __init stamp_init(void)
-- 
cgit v1.2.3


From eb7bd9c461bbfbb195cb1e1346453222a4352df4 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Fri, 7 Aug 2009 01:20:58 +0000
Subject: Blackfin: cleanup sync handling when enabling/disabling cplbs

The handling of updating the [DI]MEM_CONTROL MMRs does not follow proper
sync procedures as laid out in the Blackfin programming manual.  So rather
than audit/fix every call location, create helper functions that do the
right things in order to safely update these MMRs.  Then convert all call
sites to use these new helper functions.

While we're fixing the code, drop the workaround for anomaly 05000125 as
that anomaly applies to old versions of silicon that we do not support.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/cplb.h            | 46 ++++++++++++++++++++-
 arch/blackfin/kernel/cplb-mpu/cacheinit.c   |  6 ++-
 arch/blackfin/kernel/cplb-mpu/cplbmgr.c     | 61 +++++----------------------
 arch/blackfin/kernel/cplb-nompu/cacheinit.c |  6 ++-
 arch/blackfin/kernel/cplb-nompu/cplbmgr.c   | 33 ++-------------
 arch/blackfin/mach-bf561/secondary.S        | 20 ++-------
 arch/blackfin/mach-common/entry.S           | 14 ++-----
 arch/blackfin/mach-common/pm.c              | 64 ++++-------------------------
 8 files changed, 84 insertions(+), 166 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index c5dacf8f8cf..d18d16837a6 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -125,4 +125,48 @@
 #define FAULT_USERSUPV  (1 << 17)
 #define FAULT_CPLBBITS  0x0000ffff
 
-#endif				/* _CPLB_H */
+#ifndef __ASSEMBLY__
+
+static inline void _disable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) & ~mask;
+	/* CSYNC to ensure load store ordering */
+	__builtin_bfin_csync();
+	bfin_write32(mmr, ctrl);
+	__builtin_bfin_ssync();
+}
+static inline void disable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) & ~mask;
+	CSYNC();
+	bfin_write32(mmr, ctrl);
+	SSYNC();
+}
+#define _disable_dcplb() _disable_cplb(DMEM_CONTROL, ENDCPLB)
+#define  disable_dcplb()  disable_cplb(DMEM_CONTROL, ENDCPLB)
+#define _disable_icplb() _disable_cplb(IMEM_CONTROL, ENICPLB)
+#define  disable_icplb()  disable_cplb(IMEM_CONTROL, ENICPLB)
+
+static inline void _enable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) | mask;
+	/* CSYNC to ensure load store ordering */
+	__builtin_bfin_csync();
+	bfin_write32(mmr, ctrl);
+	__builtin_bfin_ssync();
+}
+static inline void enable_cplb(u32 mmr, u32 mask)
+{
+	u32 ctrl = bfin_read32(mmr) | mask;
+	CSYNC();
+	bfin_write32(mmr, ctrl);
+	SSYNC();
+}
+#define _enable_dcplb()  _enable_cplb(DMEM_CONTROL, ENDCPLB)
+#define  enable_dcplb()   enable_cplb(DMEM_CONTROL, ENDCPLB)
+#define _enable_icplb()  _enable_cplb(IMEM_CONTROL, ENICPLB)
+#define  enable_icplb()   enable_cplb(IMEM_CONTROL, ENICPLB)
+
+#endif		/* __ASSEMBLY__ */
+
+#endif		/* _CPLB_H */
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
index d5a86c3017f..a082681faa8 100644
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
@@ -30,13 +30,14 @@ void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
 	unsigned long ctrl;
 	int i;
 
-	SSYNC();
 	for (i = 0; i < MAX_CPLBS; i++) {
 		bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr);
 		bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data);
 	}
 	ctrl = bfin_read_IMEM_CONTROL();
 	ctrl |= IMC | ENICPLB;
+	/* CSYNC to ensure load store ordering */
+	CSYNC();
 	bfin_write_IMEM_CONTROL(ctrl);
 	SSYNC();
 }
@@ -48,7 +49,6 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	unsigned long ctrl;
 	int i;
 
-	SSYNC();
 	for (i = 0; i < MAX_CPLBS; i++) {
 		bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr);
 		bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data);
@@ -63,6 +63,8 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	 *  to port B
 	 */
 	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
+	/* CSYNC to ensure load store ordering */
+	CSYNC();
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index bcdfe9b0b71..651b12773e0 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -22,6 +22,7 @@
 
 #include <asm/blackfin.h>
 #include <asm/cacheflush.h>
+#include <asm/cplb.h>
 #include <asm/cplbinit.h>
 #include <asm/mmu_context.h>
 
@@ -41,46 +42,6 @@ int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS];
 int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS];
 int nr_cplb_flush[NR_CPUS];
 
-static inline void disable_dcplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl &= ~ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
-static inline void enable_dcplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
-static inline void disable_icplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl &= ~ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
-static inline void enable_icplb(void)
-{
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-
 /*
  * Given the contents of the status register, return the index of the
  * CPLB that caused the fault.
@@ -198,10 +159,10 @@ static noinline int dcplb_miss(unsigned int cpu)
 	dcplb_tbl[cpu][idx].addr = addr;
 	dcplb_tbl[cpu][idx].data = d_data;
 
-	disable_dcplb();
+	_disable_dcplb();
 	bfin_write32(DCPLB_DATA0 + idx * 4, d_data);
 	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
-	enable_dcplb();
+	_enable_dcplb();
 
 	return 0;
 }
@@ -288,10 +249,10 @@ static noinline int icplb_miss(unsigned int cpu)
 	icplb_tbl[cpu][idx].addr = addr;
 	icplb_tbl[cpu][idx].data = i_data;
 
-	disable_icplb();
+	_disable_icplb();
 	bfin_write32(ICPLB_DATA0 + idx * 4, i_data);
 	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
-	enable_icplb();
+	_enable_icplb();
 
 	return 0;
 }
@@ -340,19 +301,19 @@ void flush_switched_cplbs(unsigned int cpu)
 	nr_cplb_flush[cpu]++;
 
 	local_irq_save_hw(flags);
-	disable_icplb();
+	_disable_icplb();
 	for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
 		icplb_tbl[cpu][i].data = 0;
 		bfin_write32(ICPLB_DATA0 + i * 4, 0);
 	}
-	enable_icplb();
+	_enable_icplb();
 
-	disable_dcplb();
+	_disable_dcplb();
 	for (i = first_switched_dcplb; i < MAX_CPLBS; i++) {
 		dcplb_tbl[cpu][i].data = 0;
 		bfin_write32(DCPLB_DATA0 + i * 4, 0);
 	}
-	enable_dcplb();
+	_enable_dcplb();
 	local_irq_restore_hw(flags);
 
 }
@@ -385,7 +346,7 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 #endif
 	}
 
-	disable_dcplb();
+	_disable_dcplb();
 	for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
 		dcplb_tbl[cpu][i].addr = addr;
 		dcplb_tbl[cpu][i].data = d_data;
@@ -393,6 +354,6 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 		bfin_write32(DCPLB_ADDR0 + i * 4, addr);
 		addr += PAGE_SIZE;
 	}
-	enable_dcplb();
+	_enable_dcplb();
 	local_irq_restore_hw(flags);
 }
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
index d5a86c3017f..a082681faa8 100644
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
@@ -30,13 +30,14 @@ void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
 	unsigned long ctrl;
 	int i;
 
-	SSYNC();
 	for (i = 0; i < MAX_CPLBS; i++) {
 		bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr);
 		bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data);
 	}
 	ctrl = bfin_read_IMEM_CONTROL();
 	ctrl |= IMC | ENICPLB;
+	/* CSYNC to ensure load store ordering */
+	CSYNC();
 	bfin_write_IMEM_CONTROL(ctrl);
 	SSYNC();
 }
@@ -48,7 +49,6 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	unsigned long ctrl;
 	int i;
 
-	SSYNC();
 	for (i = 0; i < MAX_CPLBS; i++) {
 		bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr);
 		bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data);
@@ -63,6 +63,8 @@ void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
 	 *  to port B
 	 */
 	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
+	/* CSYNC to ensure load store ordering */
+	CSYNC();
 	bfin_write_DMEM_CONTROL(ctrl);
 	SSYNC();
 }
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index 12b030842fd..aabbb42c42c 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -48,36 +48,13 @@ int nr_cplb_flush[NR_CPUS], nr_dcplb_prot[NR_CPUS];
 #define MGR_ATTR
 #endif
 
-/*
- * We're in an exception handler.  The normal cli nop nop workaround
- * isn't going to do very much, as the only thing that can interrupt
- * us is an NMI, and the cli isn't going to stop that.
- */
-#define NOWA_SSYNC __asm__ __volatile__ ("ssync;")
-
-/* Anomaly handlers provide SSYNCs, so avoid extra if anomaly is present */
-#if ANOMALY_05000125
-
-#define bfin_write_DMEM_CONTROL_SSYNC(v)    bfin_write_DMEM_CONTROL(v)
-#define bfin_write_IMEM_CONTROL_SSYNC(v)    bfin_write_IMEM_CONTROL(v)
-
-#else
-
-#define bfin_write_DMEM_CONTROL_SSYNC(v) \
-    do { NOWA_SSYNC; bfin_write_DMEM_CONTROL(v); NOWA_SSYNC; } while (0)
-#define bfin_write_IMEM_CONTROL_SSYNC(v) \
-    do { NOWA_SSYNC; bfin_write_IMEM_CONTROL(v); NOWA_SSYNC; } while (0)
-
-#endif
-
 static inline void write_dcplb_data(int cpu, int idx, unsigned long data,
 				    unsigned long addr)
 {
-	unsigned long ctrl = bfin_read_DMEM_CONTROL();
-	bfin_write_DMEM_CONTROL_SSYNC(ctrl & ~ENDCPLB);
+	_disable_dcplb();
 	bfin_write32(DCPLB_DATA0 + idx * 4, data);
 	bfin_write32(DCPLB_ADDR0 + idx * 4, addr);
-	bfin_write_DMEM_CONTROL_SSYNC(ctrl);
+	_enable_dcplb();
 
 #ifdef CONFIG_CPLB_INFO
 	dcplb_tbl[cpu][idx].addr = addr;
@@ -88,12 +65,10 @@ static inline void write_dcplb_data(int cpu, int idx, unsigned long data,
 static inline void write_icplb_data(int cpu, int idx, unsigned long data,
 				    unsigned long addr)
 {
-	unsigned long ctrl = bfin_read_IMEM_CONTROL();
-
-	bfin_write_IMEM_CONTROL_SSYNC(ctrl & ~ENICPLB);
+	_disable_icplb();
 	bfin_write32(ICPLB_DATA0 + idx * 4, data);
 	bfin_write32(ICPLB_ADDR0 + idx * 4, addr);
-	bfin_write_IMEM_CONTROL_SSYNC(ctrl);
+	_enable_icplb();
 
 #ifdef CONFIG_CPLB_INFO
 	icplb_tbl[cpu][idx].addr = addr;
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
index 097550f7b55..f72a6af20c4 100644
--- a/arch/blackfin/mach-bf561/secondary.S
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -85,16 +85,10 @@ ENTRY(_coreb_trampoline_start)
 	R0 = ~ENICPLB;
 	R0 = R0 & R1;
 
-	/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
+	/* Disabling of CPLBs should be proceeded by a CSYNC */
+	CSYNC;
 	[p0] = R0;
 	SSYNC;
-#ifdef ANOMALY_05000125
-	STI R2;
-#endif
 
 	/* Turn off the dcache */
 	p0.l = LO(DMEM_CONTROL);
@@ -103,16 +97,10 @@ ENTRY(_coreb_trampoline_start)
 	R0 = ~ENDCPLB;
 	R0 = R0 & R1;
 
-	/* Anomaly 05000125 */
-#ifdef ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
+	/* Disabling of CPLBs should be proceeded by a CSYNC */
+	CSYNC;
 	[p0] = R0;
 	SSYNC;
-#ifdef ANOMALY_05000125
-	STI R2;
-#endif
 
 	/* in case of double faults, save a few things */
 	p0.l = _init_retx_coreb;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 4e8e3fe0ba1..e7eb16355f7 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -397,8 +397,7 @@ ENTRY(_double_fault)
 
 	R5 = [P4];              /* Control Register*/
 	BITCLR(R5,ENICPLB_P);
-	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
 
@@ -406,8 +405,7 @@ ENTRY(_double_fault)
 	P4.H = HI(DMEM_CONTROL);
 	R5 = [P4];
 	BITCLR(R5,ENDCPLB_P);
-	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
 
@@ -1146,9 +1144,7 @@ ENTRY(_early_trap)
 
 	R5 = [P4];              /* Control Register*/
 	BITCLR(R5,ENICPLB_P);
-	CLI R1;
-	SSYNC;          /* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
 
@@ -1156,11 +1152,9 @@ ENTRY(_early_trap)
 	P4.H = HI(DMEM_CONTROL);
 	R5 = [P4];
 	BITCLR(R5,ENDCPLB_P);
-	SSYNC;          /* SSYNC required before writing to DMEM_CONTROL. */
-	.align 8;
+	CSYNC;          /* Disabling of CPLBs should be proceeded by a CSYNC */
 	[P4] = R5;
 	SSYNC;
-	STI R1;
 
 	r0 = sp;        /* stack frame pt_regs pointer argument ==> r0 */
 	r1 = RETX;
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 9e7e27b7fc8..0e3d4ff9d8b 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -38,6 +38,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
+#include <asm/cplb.h>
 #include <asm/gpio.h>
 #include <asm/dma.h>
 #include <asm/dpmc.h>
@@ -170,58 +171,6 @@ static void flushinv_all_dcache(void)
 }
 #endif
 
-static inline void dcache_disable(void)
-{
-#ifdef CONFIG_BFIN_DCACHE
-	unsigned long ctrl;
-
-#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
-	flushinv_all_dcache();
-#endif
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl &= ~ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
-static inline void dcache_enable(void)
-{
-#ifdef CONFIG_BFIN_DCACHE
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_DMEM_CONTROL();
-	ctrl |= ENDCPLB;
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
-static inline void icache_disable(void)
-{
-#ifdef CONFIG_BFIN_ICACHE
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl &= ~ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
-static inline void icache_enable(void)
-{
-#ifdef CONFIG_BFIN_ICACHE
-	unsigned long ctrl;
-	SSYNC();
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= ENICPLB;
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-#endif
-}
-
 int bfin_pm_suspend_mem_enter(void)
 {
 	unsigned long flags;
@@ -258,16 +207,19 @@ int bfin_pm_suspend_mem_enter(void)
 
 	bfin_gpio_pm_hibernate_suspend();
 
-	dcache_disable();
-	icache_disable();
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
+	flushinv_all_dcache();
+#endif
+	_disable_dcplb();
+	_disable_icplb();
 	bf53x_suspend_l1_mem(memptr);
 
 	do_hibernate(wakeup | vr_wakeup);	/* Goodbye */
 
 	bf53x_resume_l1_mem(memptr);
 
-	icache_enable();
-	dcache_enable();
+	_enable_icplb();
+	_enable_dcplb();
 
 	bfin_gpio_pm_hibernate_restore();
 	blackfin_dma_resume();
-- 
cgit v1.2.3


From ad46163ac2c78eb828bbe52eaf562cab922b9e5d Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Fri, 7 Aug 2009 03:52:54 +0000
Subject: Blackfin: SMP port does not yet support cpu frequency scaling

We have an item to get this fixed, but in the mean time, disable selection
via Kconfig dependencies.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8d04ed968fd..6040aadf00e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1152,11 +1152,12 @@ source "fs/Kconfig.binfmt"
 endmenu
 
 menu "Power management options"
+	depends on !SMP
+
 source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on !SMP
 
 choice
 	prompt "Standby Power Saving Mode"
@@ -1244,6 +1245,7 @@ config PM_BFIN_WAKE_GP
 endmenu
 
 menu "CPU Frequency scaling"
+	depends on !SMP
 
 source "drivers/cpufreq/Kconfig"
 
-- 
cgit v1.2.3


From 7b06263bd70b66210fbb919be9e706ef5e82836a Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Tue, 11 Aug 2009 21:27:09 +0000
Subject: Blackfin: fix BF522/BF523 max VCO mixup

The BF522 and BF523 had their real max VCO values swapped.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 6040aadf00e..8d6b5ae9c19 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -574,8 +574,8 @@ config MAX_VCO_HZ
 	default 400000000 if BF514
 	default 400000000 if BF516
 	default 400000000 if BF518
-	default 600000000 if BF522
-	default 400000000 if BF523
+	default 400000000 if BF522
+	default 600000000 if BF523
 	default 400000000 if BF524
 	default 600000000 if BF525
 	default 400000000 if BF526
-- 
cgit v1.2.3


From c4baebf2683d16f24a84a99268ef5f7318905337 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Wed, 12 Aug 2009 23:05:35 +0000
Subject: Blackfin: do not trace the exception handler

Since the exception handler cannot cause exceptions, we cannot trace it
without easily causing double faults and crashing the system.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/traps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 0904430d413..7b3ba06e10a 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -257,7 +257,7 @@ static int kernel_mode_regs(struct pt_regs *regs)
 	return regs->ipend & 0xffc0;
 }
 
-asmlinkage void trap_c(struct pt_regs *fp)
+asmlinkage notrace void trap_c(struct pt_regs *fp)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int j;
-- 
cgit v1.2.3


From 0198b3bcaed1374f454e56e46f0e1ca1fc24e0a1 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Thu, 13 Aug 2009 04:27:31 +0000
Subject: Blackfin: drop board resources for dead devices (pbx/ad9960)

These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf518/boards/ezbrd.c     | 27 ------------------
 arch/blackfin/mach-bf527/boards/cm_bf527.c  | 43 ----------------------------
 arch/blackfin/mach-bf527/boards/ezbrd.c     | 27 ------------------
 arch/blackfin/mach-bf527/boards/ezkit.c     | 43 ----------------------------
 arch/blackfin/mach-bf533/boards/H8606.c     | 26 -----------------
 arch/blackfin/mach-bf533/boards/stamp.c     | 28 ------------------
 arch/blackfin/mach-bf537/boards/cm_bf537.c  | 17 -----------
 arch/blackfin/mach-bf537/boards/pnav10.c    | 16 -----------
 arch/blackfin/mach-bf537/boards/stamp.c     | 44 -----------------------------
 arch/blackfin/mach-bf537/boards/tcm_bf537.c | 17 -----------
 arch/blackfin/mach-bf561/boards/cm_bf561.c  | 16 -----------
 11 files changed, 304 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 4c594e647eb..03e4a9941f0 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -199,15 +199,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -296,24 +287,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 18b9bd7d7d6..fdd518c1b87 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -495,13 +495,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -509,15 +502,6 @@ static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -591,15 +575,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -610,24 +585,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 809c7907b6e..68b4c804364 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -263,15 +263,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -376,24 +367,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 617a2873843..4ab9cfa74fd 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -512,13 +512,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -526,15 +519,6 @@ static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 	.enable_dma = 0,
@@ -632,15 +616,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -652,24 +627,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 1bd8b61e688..30ff3c4a3ab 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -201,15 +201,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x1c04,
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
@@ -248,23 +239,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias	 = "fxs-spi",
-		.max_speed_hz	 = 4,
-		.bus_num	 = 1,
-		.chip_select	 = 3,
-		.controller_data = &spi_si3xxx_chip_info,
-	},
-
-	{
-		.modalias	 = "fxo-spi",
-		.max_speed_hz	 = 4,
-		.bus_num	 = 1,
-		.chip_select	 = 2,
-		.controller_data = &spi_si3xxx_chip_info,
-	},
-#endif
 };
 
 /* SPI (0) */
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index f3dc2830631..3954baa00c6 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -219,15 +219,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
 	.enable_dma = 0,
@@ -298,25 +289,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 3681d2cb40b..159e5b2f9e6 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 3bbe10227bf..0d93bbe6d27 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -293,13 +293,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -366,15 +359,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d438ca40bc1..d5aabeeb81e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -549,13 +549,6 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
 #include <linux/input.h>
 #include <linux/input/ad714x.h>
@@ -698,15 +691,6 @@ static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 #include <linux/spi/ad7877.h>
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
@@ -906,16 +890,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-
 #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
 	{
 		.modalias = "ad714x_captouch",
@@ -940,24 +914,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 	{
 		.modalias		= "ad7877",
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 97a86b4ce96..88eade89842 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index ebb07554fb0..cedcc3c6b23 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -98,13 +98,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 	.enable_dma = 0,
@@ -146,15 +139,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
-- 
cgit v1.2.3


From 3aa670419a02b19a2168894f7edbb5e4b9e4e607 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Thu, 13 Aug 2009 19:32:11 -0400
Subject: Blackfin: punt dead cache locking code

No one uses these functions, and some are duplicate of existing C code.  So
just punt the whole thing.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/Kconfig                   |   4 -
 arch/blackfin/include/asm/bfin-global.h |   5 -
 arch/blackfin/kernel/setup.c            |  51 --------
 arch/blackfin/mach-common/Makefile      |   1 -
 arch/blackfin/mach-common/lock.S        | 223 --------------------------------
 5 files changed, 284 deletions(-)
 delete mode 100644 arch/blackfin/mach-common/lock.S

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8d6b5ae9c19..f20dc775a22 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -917,10 +917,6 @@ comment "Cache Support"
 config BFIN_ICACHE
 	bool "Enable ICACHE"
 	default y
-config BFIN_ICACHE_LOCK
-	bool "Enable Instruction Cache Locking"
-	depends on BFIN_ICACHE
-	default n
 config BFIN_EXTMEM_ICACHEABLE
 	bool "Enable ICACHE for external memory"
 	depends on BFIN_ICACHE
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index e6ecbe4f4d0..aef0594e786 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -99,11 +99,6 @@ extern unsigned long bfin_sic_iwr[];
 extern unsigned vr_wakeup;
 extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
 
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-extern void cache_grab_lock(int way);
-extern void bfin_cache_lock(int way);
-#endif
-
 #endif
 
 #endif				/* _BLACKFIN_H_ */
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index f92fffc3168..ce02f981842 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -1238,57 +1238,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 #ifdef __ARCH_SYNC_CORE_ICACHE
 	seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", cpudata->icache_invld_count);
 #endif
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-	switch ((cpudata->imemctl >> 3) & WAYALL_L) {
-	case WAY0_L:
-		seq_printf(m, "Way0 Locked-Down\n");
-		break;
-	case WAY1_L:
-		seq_printf(m, "Way1 Locked-Down\n");
-		break;
-	case WAY01_L:
-		seq_printf(m, "Way0,Way1 Locked-Down\n");
-		break;
-	case WAY2_L:
-		seq_printf(m, "Way2 Locked-Down\n");
-		break;
-	case WAY02_L:
-		seq_printf(m, "Way0,Way2 Locked-Down\n");
-		break;
-	case WAY12_L:
-		seq_printf(m, "Way1,Way2 Locked-Down\n");
-		break;
-	case WAY012_L:
-		seq_printf(m, "Way0,Way1 & Way2 Locked-Down\n");
-		break;
-	case WAY3_L:
-		seq_printf(m, "Way3 Locked-Down\n");
-		break;
-	case WAY03_L:
-		seq_printf(m, "Way0,Way3 Locked-Down\n");
-		break;
-	case WAY13_L:
-		seq_printf(m, "Way1,Way3 Locked-Down\n");
-		break;
-	case WAY013_L:
-		seq_printf(m, "Way 0,Way1,Way3 Locked-Down\n");
-		break;
-	case WAY32_L:
-		seq_printf(m, "Way3,Way2 Locked-Down\n");
-		break;
-	case WAY320_L:
-		seq_printf(m, "Way3,Way2,Way0 Locked-Down\n");
-		break;
-	case WAY321_L:
-		seq_printf(m, "Way3,Way2,Way1 Locked-Down\n");
-		break;
-	case WAYALL_L:
-		seq_printf(m, "All Ways are locked\n");
-		break;
-	default:
-		seq_printf(m, "No Ways are locked\n");
-	}
-#endif
 
 	if (cpu_num != num_possible_cpus() - 1)
 		return 0;
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index dd8b2dc97f5..814cb483853 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -6,7 +6,6 @@ obj-y := \
 	cache.o cache-c.o entry.o head.o \
 	interrupt.o arch_checks.o ints-priority.o
 
-obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
 obj-$(CONFIG_PM)          += pm.o dpmc_modes.o
 obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S
deleted file mode 100644
index 6c5f5f0ea7f..00000000000
--- a/arch/blackfin/mach-common/lock.S
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * File:         arch/blackfin/mach-common/lock.S
- * Based on:
- * Author:       LG Soft India
- *
- * Created:      ?
- * Description:  kernel locks
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-/* When you come here, it is assumed that
- * R0 - Which way to be locked
- */
-
-ENTRY(_cache_grab_lock)
-
-	[--SP]=( R7:0,P5:0 );
-
-	P1.H = HI(IMEM_CONTROL);
-	P1.L = LO(IMEM_CONTROL);
-	P5.H = HI(ICPLB_ADDR0);
-	P5.L = LO(ICPLB_ADDR0);
-	P4.H = HI(ICPLB_DATA0);
-	P4.L = LO(ICPLB_DATA0);
-	R7 = R0;
-
-	/* If the code of interest already resides in the cache
-	 * invalidate the entire cache itself.
-	 * invalidate_entire_icache;
-	 */
-
-	SP += -12;
-	[--SP] = RETS;
-	CALL _invalidate_entire_icache;
-	RETS = [SP++];
-	SP += 12;
-
-	/* Disable the Interrupts*/
-
-	CLI R3;
-
-.LLOCK_WAY:
-
-	/* Way0 - 0xFFA133E0
-	 * Way1 - 0xFFA137E0
-	 * Way2 - 0xFFA13BE0	Total Way Size = 4K
-	 * Way3 - 0xFFA13FE0
-	 */
-
-	/* Procedure Ex. -Set the locks for other ways by setting ILOC[3:1]
-	 * Only Way0 of the instruction cache can now be
-	 * replaced by a new code
-	 */
-
-	R5 = R7;
-	CC = BITTST(R7,0);
-	IF CC JUMP .LCLEAR1;
-	R7 = 0;
-	BITSET(R7,0);
-	JUMP .LDONE1;
-
-.LCLEAR1:
-	R7 = 0;
-	BITCLR(R7,0);
-.LDONE1:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-	R7 = R5;
-	CC = BITTST(R7,1);
-	IF CC JUMP .LCLEAR2;
-	R7 = 0;
-	BITSET(R7,1);
-	JUMP .LDONE2;
-
-.LCLEAR2:
-	R7 = 0;
-	BITCLR(R7,1);
-.LDONE2:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-	R7 = R5;
-	CC = BITTST(R7,2);
-	IF CC JUMP .LCLEAR3;
-	R7 = 0;
-	BITSET(R7,2);
-	JUMP .LDONE3;
-.LCLEAR3:
-	R7 = 0;
-	BITCLR(R7,2);
-.LDONE3:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-
-	R7 = R5;
-	CC = BITTST(R7,3);
-	IF CC JUMP .LCLEAR4;
-	R7 = 0;
-	BITSET(R7,3);
-	JUMP .LDONE4;
-.LCLEAR4:
-	R7 = 0;
-	BITCLR(R7,3);
-.LDONE4:	R4 = R7 << 3;
-	R7 = [P1];
-	R7 = R7 | R4;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-
-	STI R3;
-
-	( R7:0,P5:0 ) = [SP++];
-
-	RTS;
-ENDPROC(_cache_grab_lock)
-
-/* After the execution of critical code, the code is now locked into
- * the cache way. Now we need to set ILOC.
- *
- * R0 - Which way to be locked
- */
-
-ENTRY(_bfin_cache_lock)
-
-	[--SP]=( R7:0,P5:0 );
-
-	P1.H = HI(IMEM_CONTROL);
-	P1.L = LO(IMEM_CONTROL);
-
-	/* Disable the Interrupts*/
-	CLI R3;
-
-	R7 = [P1];
-	R2 = ~(0x78) (X);	/* mask out ILOC */
-	R7 = R7 & R2;
-	R0 = R0 << 3;
-	R7 = R0 | R7;
-	SSYNC;		/* SSYNC required writing to IMEM_CONTROL. */
-	.align 8;
-	[P1] = R7;
-	SSYNC;
-	/* Renable the Interrupts */
-	STI R3;
-
-	( R7:0,P5:0 ) = [SP++];
-	RTS;
-ENDPROC(_bfin_cache_lock)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_invalidate_entire_icache)
-	[--SP] = ( R7:5);
-
-	P0.L = LO(IMEM_CONTROL);
-	P0.H = HI(IMEM_CONTROL);
-	R7 = [P0];
-
-	/* Clear the IMC bit , All valid bits in the instruction
-	 * cache are set to the invalid state
-	 */
-	BITCLR(R7,IMC_P);
-	CLI R6;
-	SSYNC;		/* SSYNC required before invalidating cache. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	/* Configures the instruction cache agian */
-	R6 = (IMC | ENICPLB);
-	R7 = R7 | R6;
-
-	CLI R6;
-	SSYNC;		/* SSYNC required before writing to IMEM_CONTROL. */
-	.align 8;
-	[P0] = R7;
-	SSYNC;
-	STI R6;
-
-	( R7:5) = [SP++];
-	RTS;
-ENDPROC(_invalidate_entire_icache)
-- 
cgit v1.2.3


From dac981740f4b990eadf523b0900859f189dd2b4e Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 13 Aug 2009 21:07:37 +0000
Subject: Blackfin: delete '-spi' suffix in ad1836/ad1938 driver name

The ASoC drivers have dropped the redundant "-spi" suffix in the driver
name, so update the board resources accordingly.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf527/boards/cm_bf527.c  | 2 +-
 arch/blackfin/mach-bf527/boards/ezkit.c     | 2 +-
 arch/blackfin/mach-bf533/boards/H8606.c     | 2 +-
 arch/blackfin/mach-bf533/boards/cm_bf533.c  | 2 +-
 arch/blackfin/mach-bf533/boards/ezkit.c     | 2 +-
 arch/blackfin/mach-bf533/boards/stamp.c     | 2 +-
 arch/blackfin/mach-bf537/boards/cm_bf537.c  | 2 +-
 arch/blackfin/mach-bf537/boards/pnav10.c    | 2 +-
 arch/blackfin/mach-bf537/boards/stamp.c     | 4 ++--
 arch/blackfin/mach-bf537/boards/tcm_bf537.c | 2 +-
 arch/blackfin/mach-bf548/boards/ezkit.c     | 2 +-
 arch/blackfin/mach-bf561/boards/cm_bf561.c  | 2 +-
 arch/blackfin/mach-bf561/boards/ezkit.c     | 2 +-
 13 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index fdd518c1b87..a0f623d07d3 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -568,7 +568,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 4ab9cfa74fd..2849b09abe9 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -609,7 +609,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 30ff3c4a3ab..6c2b47fe4fe 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -231,7 +231,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 16,
 		.bus_num = 1,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index 705256837a0..ef31bc5fb1c 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -130,7 +130,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 88b2dfc74d2..fd518e383b7 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -274,7 +274,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 3954baa00c6..729fd7c2633 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -281,7 +281,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 159e5b2f9e6..220cfda60f0 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -135,7 +135,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 0d93bbe6d27..10b35b838ba 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -352,7 +352,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d5aabeeb81e..7ce7d943b0c 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -870,7 +870,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
 	|| defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
@@ -881,7 +881,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
 	{
-		.modalias = "ad1938-spi",
+		.modalias = "ad1938",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 88eade89842..dc4f161c444 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -135,7 +135,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 3c06010475a..e50d136bea7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -702,7 +702,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 1,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index cedcc3c6b23..5721620cfae 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -132,7 +132,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 10edc998beb..caed96bb957 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -345,7 +345,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 	{
-		.modalias = "ad1836-spi",
+		.modalias = "ad1836",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-- 
cgit v1.2.3


From 926494943b7d9dbc998adb298a92a708232ce46b Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 17 Aug 2009 19:05:07 +0000
Subject: Blackfin: optimize fixed code handling for the most common case

The majority of the time we are returning to user space, it is not in the
fixed atomic code region.  So rather than branch to a function where we
check the PC and return, do the check inline and branch only when needed.

Also, tweak some of the fixed code handling based on assumptions we are
aware of but cannot be expressed in C.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/process.c    | 10 ++--------
 arch/blackfin/mach-common/entry.S |  6 ++++++
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 9da36bab7cc..f5b28618964 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -282,25 +282,19 @@ void finish_atomic_sections (struct pt_regs *regs)
 {
 	int __user *up0 = (int __user *)regs->p0;
 
-	if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END)
-		return;
-
 	switch (regs->pc) {
 	case ATOMIC_XCHG32 + 2:
 		put_user(regs->r1, up0);
-		regs->pc += 2;
+		regs->pc = ATOMIC_XCHG32 + 4;
 		break;
 
 	case ATOMIC_CAS32 + 2:
 	case ATOMIC_CAS32 + 4:
 		if (regs->r0 == regs->r1)
+	case ATOMIC_CAS32 + 6:
 			put_user(regs->r2, up0);
 		regs->pc = ATOMIC_CAS32 + 8;
 		break;
-	case ATOMIC_CAS32 + 6:
-		put_user(regs->r2, up0);
-		regs->pc += 2;
-		break;
 
 	case ATOMIC_ADD32 + 2:
 		regs->r0 = regs->r1 + regs->r0;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index e7eb16355f7..a9b15aaf525 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1025,6 +1025,12 @@ ENTRY(_schedule_and_signal_from_int)
 #endif
 	sti r0;
 
+	/* finish the userspace "atomic" functions for it */
+	r1 = FIXED_CODE_END;
+	r2 = [sp + PT_PC];
+	cc = r1 <= r2;
+	if cc jump .Lresume_userspace (bp);
+
 	r0 = sp;
 	sp += -12;
 	call _finish_atomic_sections;
-- 
cgit v1.2.3


From 1794131471ba19c7e30610515074b520cb34d3bb Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Tue, 18 Aug 2009 04:29:33 +0000
Subject: Blackfin: handle the core timer interrupt with handle_percpu_irq on
 SMP

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-common/ints-priority.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 4cc55bc4142..6ffda78aaf9 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1052,18 +1052,26 @@ int __init init_arch_irq(void)
 			set_irq_chained_handler(irq, bfin_demux_error_irq);
 			break;
 #endif
+
 #ifdef CONFIG_SMP
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+		case IRQ_TIMER0:
+#endif
+#ifdef CONFIG_TICKSOURCE_CORETMR
+		case IRQ_CORETMR:
+#endif
 		case IRQ_SUPPLE_0:
 		case IRQ_SUPPLE_1:
 			set_irq_handler(irq, handle_percpu_irq);
 			break;
 #endif
+
 #ifdef CONFIG_IPIPE
 #ifndef CONFIG_TICKSOURCE_CORETMR
 		case IRQ_TIMER0:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
-#endif /* !CONFIG_TICKSOURCE_CORETMR */
+#endif
 		case IRQ_CORETMR:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
@@ -1071,15 +1079,10 @@ int __init init_arch_irq(void)
 			set_irq_handler(irq, handle_level_irq);
 			break;
 #else /* !CONFIG_IPIPE */
-#ifdef CONFIG_TICKSOURCE_GPTMR0
-		case IRQ_TIMER0:
-			set_irq_handler(irq, handle_percpu_irq);
-			break;
-#endif /* CONFIG_TICKSOURCE_GPTMR0 */
 		default:
 			set_irq_handler(irq, handle_simple_irq);
 			break;
-#endif	/* !CONFIG_IPIPE */
+#endif /* !CONFIG_IPIPE */
 		}
 	}
 
-- 
cgit v1.2.3


From 8d7ac69ffaf740cdf98bdd5073c2d70a8828200e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 18 Aug 2009 16:45:25 +0000
Subject: Blackfin: Fix link errors with binutils 2.19 and GCC 4.3

Not sure whether this has been reported/fixed before.

Today I built a Blackfin tool-chain from scratch for -tip testing,
and it triggers:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.data_a_l1' referenced in expression

and:

 arch/blackfin/kernel/vmlinux.lds:1238: undefined section `.text_data_l1'
referenced in expression

Now i dont have any way to test this linker script, but it now at
least builds fine after fixing what appears to be typos in those
assert statements.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/vmlinux.lds.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index d7ffe299b97..21ac7c26079 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -221,7 +221,7 @@ SECTIONS
 		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
-	ASSERT (SIZEOF(.data_a_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
+	ASSERT (SIZEOF(.data_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
 
 	.data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
 	{
@@ -262,7 +262,7 @@ SECTIONS
 		. = ALIGN(4);
 		__ebss_l2 = .;
 	}
-	ASSERT (SIZEOF(.text_data_l1) <= L2_LENGTH, "L2 overflow!")
+	ASSERT (SIZEOF(.text_data_l2) <= L2_LENGTH, "L2 overflow!")
 
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
-- 
cgit v1.2.3


From 00dd66d012f944817a7d0cdcb0c8cb174e46937a Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Wed, 19 Aug 2009 03:15:56 +0000
Subject: Blackfin: remove useless duplicated assignment in gpio code

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/bfin_gpio.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 6b944627137..fc4681c0170 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -722,7 +722,6 @@ void bfin_gpio_pm_hibernate_suspend(void)
 		gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
 		gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
 		gpio_bank_saved[bank].data = gpio_array[bank]->data;
-		gpio_bank_saved[bank].data = gpio_array[bank]->data;
 		gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
 		gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
 	}
-- 
cgit v1.2.3


From b6dbde27dd95cc0397d9722ad8365fa93a07b0d3 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Thu, 20 Aug 2009 04:17:47 +0000
Subject: Blackfin: use raw_smp_processor_id() in exception code

When preempt debugging is enabled, smp_processor_id() may utilize the
"current" structure.  This may not be safe to access under all exceptions
due to it being in dynamically allocated memory.  So in exception code,
make sure we use raw_smp_processor_id() instead to get at the real value
directly.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/cplb-mpu/cplbmgr.c   |  2 +-
 arch/blackfin/kernel/cplb-nompu/cplbmgr.c |  2 +-
 arch/blackfin/kernel/traps.c              | 12 ++++++------
 3 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 651b12773e0..8e1e9e9e963 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -280,7 +280,7 @@ static noinline int dcplb_protection_fault(unsigned int cpu)
 int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 	switch (cause) {
 	case 0x23:
 		return dcplb_protection_fault(cpu);
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index aabbb42c42c..d9ea46c6e41 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -202,7 +202,7 @@ MGR_ATTR static int dcplb_miss(int cpu)
 MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs)
 {
 	int cause = seqstat & 0x3f;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 	switch (cause) {
 	case VEC_CPLB_I_M:
 		return icplb_miss(cpu);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 7b3ba06e10a..56464cb8edf 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -227,7 +227,7 @@ asmlinkage void double_fault_c(struct pt_regs *fp)
 	printk(KERN_EMERG "Double Fault\n");
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
 	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
-		unsigned int cpu = smp_processor_id();
+		unsigned int cpu = raw_smp_processor_id();
 		char buf[150];
 		decode_address(buf, cpu_pda[cpu].retx_doublefault);
 		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
@@ -263,7 +263,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)
 	int j;
 #endif
 #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 #endif
 	const char *strerror = NULL;
 	int sig = 0;
@@ -1098,7 +1098,7 @@ void show_regs(struct pt_regs *fp)
 	struct irqaction *action;
 	unsigned int i;
 	unsigned long flags = 0;
-	unsigned int cpu = smp_processor_id();
+	unsigned int cpu = raw_smp_processor_id();
 	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
 	verbose_printk(KERN_NOTICE "\n");
@@ -1126,13 +1126,13 @@ void show_regs(struct pt_regs *fp)
 
 	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
 	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, cpu_pda[smp_processor_id()].ex_imask, fp->syscfg);
+		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
 	if (fp->ipend & EVT_IRPTEN)
 		verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
-	if (!(cpu_pda[smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
 			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
 		verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
-	if (!(cpu_pda[smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
 		verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
 	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
 		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
-- 
cgit v1.2.3


From 05d17dfaab6671def3fcdcd95c39fd49924dbb3b Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Fri, 21 Aug 2009 03:49:19 +0000
Subject: Blackfin: fix spelling in a few comments

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/setup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index ce02f981842..369535b61ed 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -112,7 +112,7 @@ void __cpuinit bfin_setup_caches(unsigned int cpu)
 	/*
 	 * In cache coherence emulation mode, we need to have the
 	 * D-cache enabled before running any atomic operation which
-	 * might invove cache invalidation (i.e. spinlock, rwlock).
+	 * might involve cache invalidation (i.e. spinlock, rwlock).
 	 * So printk's are deferred until then.
 	 */
 #ifdef CONFIG_BFIN_ICACHE
@@ -699,7 +699,7 @@ static __init void setup_bootmem_allocator(void)
 	sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map);
 	print_memory_map("boot memmap");
 
-	/* intialize globals in linux/bootmem.h */
+	/* initialize globals in linux/bootmem.h */
 	find_min_max_pfn();
 	/* pfn of the last usable page frame */
 	if (max_pfn > memory_end >> PAGE_SHIFT)
-- 
cgit v1.2.3


From dedfd5d7f21b08d50ba8c0220778e119952e2f77 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Wed, 26 Aug 2009 15:54:10 +0000
Subject: Blackfin: workaround anomaly 05000283

Make sure our interrupt entry code with exact hardware errors handles
anomaly 05000283 (infinite stall in system MMR kill) so we don't stall
while under load.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/entry.h     | 30 ++++++++++++++++++++++++++----
 arch/blackfin/mach-common/entry.S     | 18 ++----------------
 arch/blackfin/mach-common/interrupt.S | 19 +++----------------
 3 files changed, 31 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
index ec58efc130e..55b808fced7 100644
--- a/arch/blackfin/include/asm/entry.h
+++ b/arch/blackfin/include/asm/entry.h
@@ -36,6 +36,21 @@
 # define LOAD_IPIPE_IPEND
 #endif
 
+/*
+ * Workaround for anomalies 05000283 and 05000315
+ */
+#if ANOMALY_05000283 || ANOMALY_05000315
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)		\
+	cc = dreg == dreg;				\
+	preg.h = HI(CHIPID);				\
+	preg.l = LO(CHIPID);				\
+	if cc jump 1f;					\
+	dreg.l = W[preg];				\
+1:
+#else
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)
+#endif /* ANOMALY_05000283 || ANOMALY_05000315 */
+
 #ifndef CONFIG_EXACT_HWERR
 /* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
  * otherwise it is a waste of cycles.
@@ -88,17 +103,22 @@
  * As you can see by the code - we actually need to do two SSYNCS - one to
  * make sure the read/writes complete, and another to make sure the hardware
  * error is recognized by the core.
+ *
+ * The extra nop before the SSYNC is to make sure we work around 05000244,
+ * since the 283/315 workaround includes a branch to the end
  */
 #define INTERRUPT_ENTRY(N)						\
-    SSYNC;								\
-    SSYNC;								\
     [--sp] = SYSCFG;							\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
     R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
     P0.L = LO(ILAT);							\
     P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
     R0 = [P0];								\
     CC = BITTST(R0, EVT_IVHW_P);					\
     IF CC JUMP 1f;							\
@@ -118,15 +138,17 @@
     RTI;
 
 #define TIMER_INTERRUPT_ENTRY(N)					\
-    SSYNC;								\
-    SSYNC;								\
     [--sp] = SYSCFG;							\
     [--sp] = P0;	/*orig_p0*/					\
     [--sp] = R0;	/*orig_r0*/					\
     [--sp] = (R7:0,P5:0);						\
     R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
     P0.L = LO(ILAT);							\
     P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
     R0 = [P0];								\
     CC = BITTST(R0, EVT_IVHW_P);					\
     IF CC JUMP 1f;							\
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index a9b15aaf525..01af24cde36 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -513,14 +513,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	ssync;
 #endif
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r7 == r7;
-	p5.h = HI(CHIPID);
-	p5.l = LO(CHIPID);
-	if cc jump 1f;
-	r7.l = W[p5];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p5, r7)
 
 #ifdef CONFIG_DEBUG_DOUBLEFAULT
 	/*
@@ -1134,14 +1127,7 @@ ENTRY(_early_trap)
 	SAVE_ALL_SYS
 	trace_buffer_stop(p0,r0);
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r5 == r5;
-	p4.h = HI(CHIPID);
-	p4.l = LO(CHIPID);
-	if cc jump 1f;
-	r5.l = W[p4];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p4, r5)
 
 	/* Turn caches off, to ensure we don't get double exceptions */
 
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index c754ff74bd5..82d417ef4b5 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -119,14 +119,8 @@ __common_int_entry:
 	fp = 0;
 #endif
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r7 == r7;
-	p5.h = HI(CHIPID);
-	p5.l = LO(CHIPID);
-	if cc jump 1f;
-	r7.l = W[p5];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p5, r7)
+
 	r1 =  sp;
 	SP += -12;
 #ifdef CONFIG_IPIPE
@@ -158,14 +152,7 @@ ENTRY(_evt_ivhw)
 	fp = 0;
 #endif
 
-#if ANOMALY_05000283 || ANOMALY_05000315
-	cc = r7 == r7;
-	p5.h = HI(CHIPID);
-	p5.l = LO(CHIPID);
-	if cc jump 1f;
-	r7.l = W[p5];
-1:
-#endif
+	ANOMALY_283_315_WORKAROUND(p5, r7)
 
 	/* Handle all stacked hardware errors
 	 * To make sure we don't hang forever, only do it 10 times
-- 
cgit v1.2.3


From c40cdb2cbdd3cfa783c22087d29ef570d60dd141 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Thu, 27 Aug 2009 01:46:48 +0000
Subject: Blackfin: add some isram-driver self tests

Make it easy to figure out if code changes here are correct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/Kconfig.debug     |   6 ++
 arch/blackfin/mm/isram-driver.c | 212 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 216 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 1fc4981d486..87f195ee2e0 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -252,4 +252,10 @@ config ACCESS_CHECK
 
 	  Say N here to disable that check to improve the performance.
 
+config BFIN_ISRAM_SELF_TEST
+	bool "isram boot self tests"
+	default n
+	help
+	  Run some self tests of the isram driver code at boot.
+
 endmenu
diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index c080e70f98b..02eaaa641d4 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -16,6 +16,8 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#define pr_fmt(fmt) "isram: " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -23,6 +25,7 @@
 #include <linux/sched.h>
 
 #include <asm/blackfin.h>
+#include <asm/dma.h>
 
 /*
  * IMPORTANT WARNING ABOUT THESE FUNCTIONS
@@ -127,8 +130,7 @@ static bool isram_check_addr(const void *addr, size_t n)
 	    (addr < (void *)(L1_CODE_START + L1_CODE_LENGTH))) {
 		if ((addr + n) > (void *)(L1_CODE_START + L1_CODE_LENGTH)) {
 			show_stack(NULL, NULL);
-			printk(KERN_ERR "isram_memcpy: copy involving %p length "
-					"(%zu) too long\n", addr, n);
+			pr_err("copy involving %p length (%zu) too long\n", addr, n);
 		}
 		return true;
 	}
@@ -199,3 +201,209 @@ void *isram_memcpy(void *dest, const void *src, size_t n)
 }
 EXPORT_SYMBOL(isram_memcpy);
 
+#ifdef CONFIG_BFIN_ISRAM_SELF_TEST
+
+#define TEST_LEN 0x100
+
+static __init void hex_dump(unsigned char *buf, int len)
+{
+	while (len--)
+		pr_cont("%02x", *buf++);
+}
+
+static __init int isram_read_test(char *sdram, void *l1inst)
+{
+	int i, ret = 0;
+	uint64_t data1, data2;
+
+	pr_info("INFO: running isram_read tests\n");
+
+	/* setup some different data to play with */
+	for (i = 0; i < TEST_LEN; ++i)
+		sdram[i] = i;
+	dma_memcpy(l1inst, sdram, TEST_LEN);
+
+	/* make sure we can read the L1 inst */
+	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+		data1 = isram_read(l1inst + i);
+		memcpy(&data2, sdram + i, sizeof(data2));
+		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+			pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
+				l1inst + i, data1, data2);
+			++ret;
+		}
+	}
+
+	return ret;
+}
+
+static __init int isram_write_test(char *sdram, void *l1inst)
+{
+	int i, ret = 0;
+	uint64_t data1, data2;
+
+	pr_info("INFO: running isram_write tests\n");
+
+	/* setup some different data to play with */
+	memset(sdram, 0, TEST_LEN * 2);
+	dma_memcpy(l1inst, sdram, TEST_LEN);
+	for (i = 0; i < TEST_LEN; ++i)
+		sdram[i] = i;
+
+	/* make sure we can write the L1 inst */
+	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+		memcpy(&data1, sdram + i, sizeof(data1));
+		isram_write(l1inst + i, data1);
+		data2 = isram_read(l1inst + i);
+		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+			pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
+				l1inst + i, data1, data2);
+			++ret;
+		}
+	}
+
+	dma_memcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
+	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+		pr_err("FAIL: isram_write() did not work properly\n");
+		++ret;
+	}
+
+	return ret;
+}
+
+static __init int
+_isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
+                   void *(*fmemcpy)(void *, const void *, size_t))
+{
+	memset(sdram, pattern, TEST_LEN);
+	fmemcpy(l1inst, sdram, TEST_LEN);
+	fmemcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
+	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+		pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
+			smemcpy, l1inst, sdram, TEST_LEN, pattern);
+		return 1;
+	}
+	return 0;
+}
+#define _isram_memcpy_test(a, b, c, d) _isram_memcpy_test(a, b, c, #d, d)
+
+static __init int isram_memcpy_test(char *sdram, void *l1inst)
+{
+	int i, j, thisret, ret = 0;
+
+	/* check broad isram_memcpy() */
+	pr_info("INFO: running broad isram_memcpy tests\n");
+	for (i = 0xf; i >= 0; --i)
+		ret += _isram_memcpy_test(i, sdram, l1inst, isram_memcpy);
+
+	/* check read of small, unaligned, and hardware 64bit limits */
+	pr_info("INFO: running isram_memcpy (read) tests\n");
+
+	for (i = 0; i < TEST_LEN; ++i)
+		sdram[i] = i;
+	dma_memcpy(l1inst, sdram, TEST_LEN);
+
+	thisret = 0;
+	for (i = 0; i < TEST_LEN - 32; ++i) {
+		unsigned char cmp[32];
+		for (j = 1; j <= 32; ++j) {
+			memset(cmp, 0, sizeof(cmp));
+			isram_memcpy(cmp, l1inst + i, j);
+			if (memcmp(cmp, sdram + i, j)) {
+				pr_err("FAIL: %p:", l1inst + 1);
+				hex_dump(cmp, j);
+				pr_cont(" SDRAM:");
+				hex_dump(sdram + i, j);
+				pr_cont("\n");
+				if (++thisret > 20) {
+					pr_err("FAIL: skipping remaining series\n");
+					i = TEST_LEN;
+					break;
+				}
+			}
+		}
+	}
+	ret += thisret;
+
+	/* check write of small, unaligned, and hardware 64bit limits */
+	pr_info("INFO: running isram_memcpy (write) tests\n");
+
+	memset(sdram + TEST_LEN, 0, TEST_LEN);
+	dma_memcpy(l1inst, sdram + TEST_LEN, TEST_LEN);
+
+	thisret = 0;
+	for (i = 0; i < TEST_LEN - 32; ++i) {
+		unsigned char cmp[32];
+		for (j = 1; j <= 32; ++j) {
+			isram_memcpy(l1inst + i, sdram + i, j);
+			dma_memcpy(cmp, l1inst + i, j);
+			if (memcmp(cmp, sdram + i, j)) {
+				pr_err("FAIL: %p:", l1inst + i);
+				hex_dump(cmp, j);
+				pr_cont(" SDRAM:");
+				hex_dump(sdram + i, j);
+				pr_cont("\n");
+				if (++thisret > 20) {
+					pr_err("FAIL: skipping remaining series\n");
+					i = TEST_LEN;
+					break;
+				}
+			}
+		}
+	}
+	ret += thisret;
+
+	return ret;
+}
+
+static __init int isram_test_init(void)
+{
+	int ret;
+	char *sdram;
+	void *l1inst;
+
+	sdram = kmalloc(TEST_LEN * 2, GFP_KERNEL);
+	if (!sdram) {
+		pr_warning("SKIP: could not allocate sdram\n");
+		return 0;
+	}
+
+	l1inst = l1_inst_sram_alloc(TEST_LEN);
+	if (!l1inst) {
+		kfree(sdram);
+		pr_warning("SKIP: could not allocate L1 inst\n");
+		return 0;
+	}
+
+	/* sanity check initial L1 inst state */
+	ret = 1;
+	pr_info("INFO: running initial dma_memcpy checks\n");
+	if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
+		goto abort;
+	if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
+		goto abort;
+
+	ret = 0;
+	ret += isram_read_test(sdram, l1inst);
+	ret += isram_write_test(sdram, l1inst);
+	ret += isram_memcpy_test(sdram, l1inst);
+
+ abort:
+	sram_free(l1inst);
+	kfree(sdram);
+
+	if (ret)
+		return -EIO;
+
+	pr_info("PASS: all tests worked !\n");
+	return 0;
+}
+late_initcall(isram_test_init);
+
+static __exit void isram_test_exit(void)
+{
+	/* stub to allow unloading */
+}
+module_exit(isram_test_exit);
+
+#endif
-- 
cgit v1.2.3


From ba877d4491a06ae69d53981bc242ef97a8157026 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 27 Aug 2009 04:09:32 +0000
Subject: Blackfin: bf537-stamp: add adp5588 gpio resources

For the adp5588 GPIO daughter card.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 7ce7d943b0c..9db6b40743e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1437,6 +1437,14 @@ static struct adp5520_platform_data adp5520_pdev_data = {
 
 #endif
 
+#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+#include <linux/i2c/adp5588.h>
+static struct adp5588_gpio_platfrom_data adp5588_gpio_data = {
+	.gpio_start = 50,
+	.pullup_dis_mask = 0,
+};
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_INPUT_EVAL_AD7142EB)
 	{
@@ -1484,6 +1492,12 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adxl34x_info,
 	},
 #endif
+#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+	{
+		I2C_BOARD_INFO("adp5588-gpio", 0x34),
+		.platform_data = (void *)&adp5588_gpio_data,
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-- 
cgit v1.2.3


From 774b80229fcb9df22aadec8fc5b143a842135535 Mon Sep 17 00:00:00 2001
From: Robin Getz <robin.getz@analog.com>
Date: Thu, 27 Aug 2009 14:39:31 +0000
Subject: Blackfin: fix typo in isram_write()

The DTEST write bit is 2, not 1.  Improve comments in the related macro
while we're here.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mm/isram-driver.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mm/isram-driver.c b/arch/blackfin/mm/isram-driver.c
index 02eaaa641d4..beb1a608824 100644
--- a/arch/blackfin/mm/isram-driver.c
+++ b/arch/blackfin/mm/isram-driver.c
@@ -53,10 +53,12 @@ static DEFINE_SPINLOCK(dtest_lock);
 #define IADDR2DTEST(x) \
 	({ unsigned long __addr = (unsigned long)(x); \
 		(__addr & 0x47F8)        | /* address bits 14 & 10:3 */ \
+		(__addr & 0x8000) << 23  | /* Bank A/B               */ \
 		(__addr & 0x0800) << 15  | /* address bit  11        */ \
-		(__addr  & 0x3000) << 4  | /* address bits 13:12     */ \
-		(__addr  & 0x8000) << 8  | /* address bit  15        */ \
-		(0x1000004);               /* isram access           */ \
+		(__addr & 0x3000) <<  4  | /* address bits 13:12     */ \
+		(__addr & 0x8000) <<  8  | /* address bit  15        */ \
+		(0x1000000)              | /* instruction access = 1 */ \
+		(0x4);                     /* data array = 1         */ \
 	})
 
 /* Takes a pointer, and returns the offset (in bits) which things should be shifted */
@@ -73,7 +75,7 @@ static void isram_write(const void *addr, uint64_t data)
 	if (addr >= (void *)(L1_CODE_START + L1_CODE_LENGTH))
 		return;
 
-	cmd = IADDR2DTEST(addr) | 1;             /* write */
+	cmd = IADDR2DTEST(addr) | 2;             /* write */
 
 	/*
 	 * Writes to DTEST_DATA[0:1] need to be atomic with write to DTEST_COMMAND
-- 
cgit v1.2.3


From 4e4d496ee3bdc587682f2bf675bed71d64752416 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Sun, 30 Aug 2009 20:45:50 +0000
Subject: Blackfin: fix BF54x SPI CS resources

The BF54x has three slave select signals for SPI0/SPI1, not eight.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf548/boards/cm_bf548.c | 4 ++--
 arch/blackfin/mach-bf548/boards/ezkit.c    | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index f5a3c30a41b..290b6e9ec21 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -642,7 +642,7 @@ static struct resource bfin_spi1_resource[] = {
 
 /* SPI controller data */
 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -658,7 +658,7 @@ static struct platform_device bf54x_spi_master0 = {
 };
 
 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index e50d136bea7..c66f3801274 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -783,7 +783,7 @@ static struct resource bfin_spi1_resource[] = {
 
 /* SPI controller data */
 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -799,7 +799,7 @@ static struct platform_device bf54x_spi_master0 = {
 };
 
 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
-	.num_chipselect = 8,
+	.num_chipselect = 3,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
-- 
cgit v1.2.3


From 4a3e53c1c4dd44b9d0fa1537c1294eb72229bfce Mon Sep 17 00:00:00 2001
From: Mingquan Pan <grace.pan@analog.com>
Date: Mon, 31 Aug 2009 04:56:06 +0000
Subject: Blackfin: use KERN_ALERT in all kgdb_test output

Most messages are already using KERN_ALERT, so be consistent to make
things easier to check with test scripts.

Signed-off-by: Mingquan Pan <grace.pan@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/kgdb_test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index dbcf3e45cb0..59fc42dc5d6 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -54,7 +54,7 @@ void kgdb_l2_test(void)
 
 int kgdb_test(char *name, int len, int count, int z)
 {
-	printk(KERN_DEBUG "kgdb name(%d): %s, %d, %d\n", len, name, count, z);
+	printk(KERN_ALERT "kgdb name(%d): %s, %d, %d\n", len, name, count, z);
 	count = z;
 	return count;
 }
-- 
cgit v1.2.3


From 4663f6ef251766cc9f7ab21af35661d8a736bef2 Mon Sep 17 00:00:00 2001
From: Bernd Schmidt <bernds_cb1@t-online.de>
Date: Wed, 2 Sep 2009 08:14:05 +0000
Subject: Blackfin: add ICPLB coverage for async banks

When doing XIP, we need to execute out of the async banks, so we need
ICPLBs to allow this.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/cplb-nompu/cplbinit.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 685f160a5a3..5d8ad503f82 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -36,7 +36,7 @@ int first_switched_icplb PDT_ATTR;
 int first_switched_dcplb PDT_ATTR;
 
 struct cplb_boundary dcplb_bounds[9] PDT_ATTR;
-struct cplb_boundary icplb_bounds[7] PDT_ATTR;
+struct cplb_boundary icplb_bounds[9] PDT_ATTR;
 
 int icplb_nr_bounds PDT_ATTR;
 int dcplb_nr_bounds PDT_ATTR;
@@ -167,14 +167,21 @@ void __init generate_cplb_tables_all(void)
 		icplb_bounds[i_i++].data = (reserved_mem_icache_on ?
 					    SDRAM_IGENERIC : SDRAM_INON_CHBL);
 	}
+	/* Addressing hole up to the async bank.  */
+	icplb_bounds[i_i].eaddr = ASYNC_BANK0_BASE;
+	icplb_bounds[i_i++].data = 0;
+	/* ASYNC banks.  */
+	icplb_bounds[i_i].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE;
+	icplb_bounds[i_i++].data = SDRAM_EBIU;
 	/* Addressing hole up to BootROM.  */
 	icplb_bounds[i_i].eaddr = BOOT_ROM_START;
 	icplb_bounds[i_i++].data = 0;
 	/* BootROM -- largest one should be less than 1 meg.  */
 	icplb_bounds[i_i].eaddr = BOOT_ROM_START + (1 * 1024 * 1024);
 	icplb_bounds[i_i++].data = SDRAM_IGENERIC;
+
 	if (L2_LENGTH) {
-		/* Addressing hole up to L2 SRAM, including the async bank.  */
+		/* Addressing hole up to L2 SRAM.  */
 		icplb_bounds[i_i].eaddr = L2_START;
 		icplb_bounds[i_i++].data = 0;
 		/* L2 SRAM.  */
-- 
cgit v1.2.3


From 88c28b2df99d306a47d7fb88520482059643e503 Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 7 Sep 2009 03:20:48 +0000
Subject: Blackfin: increase default async timings for parallel flashes

The default async timings are a little too fast for the parallel flash
that is attached by default to the async banks.  So slow things down a bit
so accessing the hardware is stable.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/configs/BF518F-EZBRD_defconfig | 4 ++--
 arch/blackfin/configs/BF526-EZBRD_defconfig  | 4 ++--
 arch/blackfin/configs/BF527-EZKIT_defconfig  | 4 ++--
 arch/blackfin/configs/BF548-EZKIT_defconfig  | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index dcfb4889559..9905b26009e 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -358,9 +358,9 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC0
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 48a3a7a9099..9dc68208802 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -359,9 +359,9 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC0
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index dd8352791da..77e35d4baf5 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -363,9 +363,9 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC0
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index b3d3cab81cf..f773ad1155d 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -400,7 +400,7 @@ CONFIG_C_AMBEN_ALL=y
 # EBIU_AMBCTL Control
 #
 CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
-- 
cgit v1.2.3


From 769cfc0d08e796c593b903ec393a2e90aae5f807 Mon Sep 17 00:00:00 2001
From: Barry Song <barry.song@analog.com>
Date: Thu, 10 Sep 2009 04:32:47 +0000
Subject: Blackfin: bf538-ezkit: add SPI IRQ resources

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf538/boards/ezkit.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 9113f60d65f..f2ac3b0ebf2 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -402,6 +402,11 @@ static struct resource bfin_spi2_resource[] = {
 	[1] = {
 		.start = CH_SPI2,
 		.end   = CH_SPI2,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI2,
+		.end   = IRQ_SPI2,
 		.flags = IORESOURCE_IRQ,
 	}
 };
-- 
cgit v1.2.3


From 6058434468daa16580a77922661b31b880d60db5 Mon Sep 17 00:00:00 2001
From: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Date: Thu, 10 Sep 2009 15:12:08 +0000
Subject: Blackfin: cm-bf537u: split board from cm-bf537e

The cm-bf537u module, while similar to the cm-bf537e, is different enough
to warrant its own resources.  It has a USB controller but no PHY.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/Kconfig                       |   7 +-
 arch/blackfin/mach-bf537/boards/Kconfig     |  12 +-
 arch/blackfin/mach-bf537/boards/Makefile    |   3 +-
 arch/blackfin/mach-bf537/boards/cm_bf537.c  | 632 ------------------------
 arch/blackfin/mach-bf537/boards/cm_bf537e.c | 727 ++++++++++++++++++++++++++++
 arch/blackfin/mach-bf537/boards/cm_bf537u.c | 633 ++++++++++++++++++++++++
 6 files changed, 1375 insertions(+), 639 deletions(-)
 delete mode 100644 arch/blackfin/mach-bf537/boards/cm_bf537.c
 create mode 100644 arch/blackfin/mach-bf537/boards/cm_bf537e.c
 create mode 100644 arch/blackfin/mach-bf537/boards/cm_bf537u.c

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f20dc775a22..e7a781d2148 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -342,8 +342,9 @@ config MEM_MT48LC64M4A2FB_7E
 config MEM_MT48LC16M16A2TG_75
 	bool
 	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
-		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-		|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
+		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM_E \
+		|| BFIN537_BLUETECHNIX_CM_U || H8606_HVSISTEMAS \
+		|| BFIN527_BLUETECHNIX_CM)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -459,7 +460,7 @@ config VCO_MULT
 	default "45" if BFIN533_STAMP
 	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
-	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
+	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
 	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
 	help
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 77c59da87e8..44132fda63b 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -9,11 +9,17 @@ config BFIN537_STAMP
 	help
 	  BF537-STAMP board support.
 
-config BFIN537_BLUETECHNIX_CM
-	bool "Bluetechnix CM-BF537"
+config BFIN537_BLUETECHNIX_CM_E
+	bool "Bluetechnix CM-BF537E"
 	depends on (BF537)
 	help
-	  CM-BF537 support for EVAL- and DEV-Board.
+	  CM-BF537E support for EVAL- and DEV-Board.
+
+config BFIN537_BLUETECHNIX_CM_U
+	bool "Bluetechnix CM-BF537U"
+	depends on (BF537)
+	help
+	  CM-BF537U support for EVAL- and DEV-Board.
 
 config BFIN537_BLUETECHNIX_TCM
 	bool "Bluetechnix TCM-BF537"
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 68b98a7af6a..7e6aa4e5b20 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,8 @@
 #
 
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
-obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_E) += cm_bf537e.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_CM_U) += cm_bf537u.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o
 obj-$(CONFIG_CAMSIG_MINOTAUR)          += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
deleted file mode 100644
index 220cfda60f0..00000000000
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:  Board description file
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/ata_platform.h>
-#include <linux/irq.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "Bluetechnix CM BF537";
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00020000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0xe0000,
-		.offset = 0x20000
-	}, {
-		.name = "file system(spi)",
-		.size = 0x700000,
-		.offset = 0x00100000,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-	.enable_dma = 1,         /* use dma transfer with this chip*/
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 8,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
-	{
-		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. */
-		.platform_data = NULL, /* No spi_driver specific config */
-		.controller_data = &spi_adc_chip_info,
-	},
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-	{
-		.modalias = "ad1836",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-		.controller_data = &ad1836_spi_chip_info,
-	},
-#endif
-
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
-static struct platform_device hitachi_fb_device = {
-	.name = "hitachi-tx09",
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda = RPC_LED_100_10,
-	.ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x20200300,
-		.end = 0x20200300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF14,
-		.end = IRQ_PF14,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20308000,
-		.end = 0x20308000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20308004,
-		.end = 0x20308004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PG15,
-		.end = IRQ_PG15,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20200000,
-		.end = 0x20200000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PH14,
-		.end = IRQ_PH14,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-static struct resource bfin_gpios_resources = {
-	.start = 0,
-	.end   = MAX_BLACKFIN_GPIOS - 1,
-	.flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
-	.name = "simple-gpio",
-	.id = -1,
-	.num_resources = 1,
-	.resource = &bfin_gpios_resources,
-};
-
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
-static struct mtd_partition cm_partitions[] = {
-	{
-		.name   = "bootloader(nor)",
-		.size   = 0x40000,
-		.offset = 0,
-	}, {
-		.name   = "linux kernel(nor)",
-		.size   = 0xE0000,
-		.offset = MTDPART_OFS_APPEND,
-	}, {
-		.name   = "file system(nor)",
-		.size   = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data cm_flash_data = {
-	.width    = 2,
-	.parts    = cm_partitions,
-	.nr_parts = ARRAY_SIZE(cm_partitions),
-};
-
-static unsigned cm_flash_gpios[] = { GPIO_PF4 };
-
-static struct resource cm_flash_resource[] = {
-	{
-		.name  = "cfi_probe",
-		.start = 0x20000000,
-		.end   = 0x201fffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = (unsigned long)cm_flash_gpios,
-		.end   = ARRAY_SIZE(cm_flash_gpios),
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device cm_flash_device = {
-	.name          = "gpio-addr-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &cm_flash_data,
-	},
-	.num_resources = ARRAY_SIZE(cm_flash_resource),
-	.resource      = cm_flash_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device bfin_uart_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	IRQ_PF14
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 2,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x2030C000,
-		.end = 0x2030C01F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2030D018,
-		.end = 0x2030D01B,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-	VRPAIR(VLEV_085, 250000000),
-	VRPAIR(VLEV_090, 376000000),
-	VRPAIR(VLEV_095, 426000000),
-	VRPAIR(VLEV_100, 426000000),
-	VRPAIR(VLEV_105, 476000000),
-	VRPAIR(VLEV_110, 476000000),
-	VRPAIR(VLEV_115, 476000000),
-	VRPAIR(VLEV_120, 500000000),
-	VRPAIR(VLEV_125, 533000000),
-	VRPAIR(VLEV_130, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-static struct platform_device *cm_bf537_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
-	&hitachi_fb_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-	&i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-	&bfin_sport0_uart_device,
-	&bfin_sport1_uart_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-	&net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	&bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
-	&cm_flash_device,
-#endif
-
-	&bfin_gpios_device,
-};
-
-static int __init cm_bf537_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
-	return 0;
-}
-
-arch_initcall(cm_bf537_init);
-
-void bfin_get_ether_addr(char *addr)
-{
-	random_ether_addr(addr);
-	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
new file mode 100644
index 00000000000..87acb7dd2df
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -0,0 +1,727 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
+ * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537E";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG13,
+		.end = IRQ_PG13,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+	{
+		/*
+		 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+		 */
+		.start = -1,
+		.end = -1,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537e_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+	&hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init cm_bf537e_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf537e_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
new file mode 100644
index 00000000000..8219dc3d65b
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -0,0 +1,633 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/cm_bf537u.c
+ * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/mmc_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537U";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00020000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = 0x20000
+	}, {
+		.name = "file system(spi)",
+		.size = 0x700000,
+		.offset = 0x00100000,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+	.name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda = RPC_LED_100_10,
+	.ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	{
+		.start = 0x20200300,
+		.end = 0x20200300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF14,
+		.end = IRQ_PF14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20308000,
+		.end = 0x20308000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20308004,
+		.end = 0x20308004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PG15,
+		.end = IRQ_PG15,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20200000,
+		.end = 0x20200000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PH14,
+		.end = IRQ_PH14,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PH0 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 2,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x2030C000,
+		.end = 0x2030C01F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2030D018,
+		.end = 0x2030D01B,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 500000000),
+	VRPAIR(VLEV_125, 533000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *cm_bf537u_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+	&hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init cm_bf537u_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(cm_bf537u_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
-- 
cgit v1.2.3


From 9c21453e376c03bcba9c6d89dc5735b40a35b098 Mon Sep 17 00:00:00 2001
From: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Date: Thu, 10 Sep 2009 15:30:03 +0000
Subject: Blackfin: update cm board resources

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/mach-bf527/boards/cm_bf527.c  |  97 ++++++++++++-----------
 arch/blackfin/mach-bf533/boards/cm_bf533.c  | 114 +++++++++++++++++++++++++++-
 arch/blackfin/mach-bf537/boards/tcm_bf537.c |  13 ++--
 arch/blackfin/mach-bf548/boards/cm_bf548.c  |  15 +++-
 arch/blackfin/mach-bf561/boards/cm_bf561.c  | 113 ++++++++++++++++++++++++++-
 5 files changed, 297 insertions(+), 55 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index a0f623d07d3..08a3f01c988 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -151,46 +151,6 @@ static struct platform_device musb_device = {
 };
 #endif
 
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition ezkit_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezkit_flash_data = {
-	.width      = 2,
-	.parts      = ezkit_partitions,
-	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
-};
-
-static struct resource ezkit_flash_resource = {
-	.start = 0x20000000,
-	.end   = 0x201fffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezkit_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezkit_flash_resource,
-};
-#endif
-
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
@@ -662,6 +622,55 @@ static struct platform_device bfin_fb_adv7393_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+	{
+		.name   = "bootloader(nor)",
+		.size   = 0x40000,
+		.offset = 0,
+	}, {
+		.name   = "linux kernel(nor)",
+		.size   = 0x100000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name   = "file system(nor)",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data cm_flash_data = {
+	.width    = 2,
+	.parts    = cm_partitions,
+	.nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PH9, GPIO_PG11 };
+
+static struct resource cm_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)cm_flash_gpios,
+		.end   = ARRAY_SIZE(cm_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device cm_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &cm_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(cm_flash_resource),
+	.resource      = cm_flash_resource,
+};
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 static struct resource bfin_uart_resources[] = {
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -847,7 +856,7 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
-static struct platform_device *stamp_devices[] __initdata = {
+static struct platform_device *cmbf527_devices[] __initdata = {
 
 	&bfin_dpmc,
 
@@ -930,8 +939,8 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-	&ezkit_flash_device,
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&cm_flash_device,
 #endif
 
 	&bfin_gpios_device,
@@ -942,7 +951,7 @@ static int __init cm_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	i2c_register_board_info(0, bfin_i2c_board_info,
 				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	platform_add_devices(cmbf527_devices, ARRAY_SIZE(cmbf527_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index ef31bc5fb1c..7443b26c80c 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -31,8 +31,10 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
@@ -141,9 +143,9 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 5,
+		.chip_select = 1,
 		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -225,6 +227,40 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x20308000,
+		.end = 0x20308000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF8,
+		.end = IRQ_PF8,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
 static struct resource bfin_gpios_resources = {
 	.start = 0,
 	.end   = MAX_BLACKFIN_GPIOS - 1,
@@ -335,6 +371,68 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF6,
+		.end = IRQ_PF6,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux+rootfs(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
+
+
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -393,10 +491,22 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 	&smc91x_device,
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+	&smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&para_flash_device,
+#endif
+
 	&bfin_gpios_device,
 };
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index dc4f161c444..61353f7bcb9 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -45,6 +45,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <linux/spi/mmc_spi.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -148,7 +149,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 5,
+		.chip_select = 1,
 		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -279,12 +280,12 @@ static struct platform_device isp1362_hcd_device = {
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 static struct resource net2272_bfin_resources[] = {
 	{
-		.start = 0x20200000,
-		.end = 0x20200000 + 0x100,
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = IRQ_PH14,
-		.end = IRQ_PH14,
+		.start = IRQ_PG13,
+		.end = IRQ_PG13,
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
@@ -318,7 +319,7 @@ static struct mtd_partition cm_partitions[] = {
 		.offset = 0,
 	}, {
 		.name   = "linux kernel(nor)",
-		.size   = 0xE0000,
+		.size   = 0x100000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name   = "file system(nor)",
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 290b6e9ec21..e565aae11d7 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -291,6 +291,8 @@ static struct platform_device bfin_sir3_device = {
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
 static struct resource smsc911x_resources[] = {
 	{
 		.name = "smsc911x-memory",
@@ -304,11 +306,22 @@ static struct resource smsc911x_resources[] = {
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
 static struct platform_device smsc911x_device = {
 	.name = "smsc911x",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(smsc911x_resources),
 	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 #endif
 
@@ -473,7 +486,7 @@ static struct mtd_partition para_partitions[] = {
 		.offset     = 0,
 	}, {
 		.name       = "linux kernel(nor)",
-		.size       = 0x400000,
+		.size       = 0x100000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "file system(nor)",
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 5721620cfae..6577ecfcf11 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -42,6 +42,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <linux/mtd/physmap.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -142,9 +143,9 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 5,
+		.chip_select = 1,
 		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
@@ -228,6 +229,62 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct resource smsc911x_resources[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = 0x24008000,
+		.end = 0x24008000 + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_PF43,
+		.end = IRQ_PF43,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.flags = SMSC911X_USE_16BIT,
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x24000000,
+		.end = 0x24000000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF45,
+		.end = IRQ_PF45,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
 static struct resource bfin_gpios_resources = {
 	.start = 0,
 	.end   = MAX_BLACKFIN_GPIOS - 1,
@@ -363,6 +420,46 @@ static struct platform_device bfin_pata_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition para_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x100000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data para_flash_data = {
+	.width      = 2,
+	.parts      = para_partitions,
+	.nr_parts   = ARRAY_SIZE(para_partitions),
+};
+
+static struct resource para_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x207fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device para_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &para_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &para_flash_resource,
+};
+#endif
+
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -416,6 +513,14 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 	&smc91x_device,
 #endif
 
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+	&smsc911x_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
@@ -424,6 +529,10 @@ static struct platform_device *cm_bf561_devices[] __initdata = {
 	&bfin_pata_device,
 #endif
 
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&para_flash_device,
+#endif
+
 	&bfin_gpios_device,
 };
 
-- 
cgit v1.2.3


From 3289651a9767556822adbd492be957a1287ffd3f Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 14 Sep 2009 01:50:22 +0000
Subject: Blackfin: update ftrace_push_return_trace() breakage

Commit 71e308a239c updated ftrace_push_return_trace() prototype but didn't
update the Blackfin ftrace code, so things broke.  Since we don't support
the new stuff yet, call it with stub values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
index 905bfc40a00..f2c85ac6f2d 100644
--- a/arch/blackfin/kernel/ftrace.c
+++ b/arch/blackfin/kernel/ftrace.c
@@ -24,7 +24,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth) == -EBUSY)
+	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth, 0) == -EBUSY)
 		return;
 
 	trace.func = self_addr;
-- 
cgit v1.2.3


From e78feaaeeb9bbf78f961917d72d692802ac110e8 Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Mon, 14 Sep 2009 04:41:00 +0000
Subject: Blackfin: swap clocksource ratings for gptimer/cycles

The cycles clocksource is a higher resolution than the gptimer one, so
make sure the ratings field reflects this.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/Kconfig          | 2 +-
 arch/blackfin/kernel/time-ts.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index e7a781d2148..9a01d445eca 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -648,7 +648,7 @@ config CYCLES_CLOCKSOURCE
 	  writing the registers will most likely crash the kernel.
 
 config GPTMR0_CLOCKSOURCE
-	bool "Use GPTimer0 as a clocksource (higher rating)"
+	bool "Use GPTimer0 as a clocksource"
 	select BFIN_GPTIMERS
 	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 0791eba40d9..f9715764383 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -66,7 +66,7 @@ static cycle_t bfin_read_cycles(struct clocksource *cs)
 
 static struct clocksource bfin_cs_cycles = {
 	.name		= "bfin_cs_cycles",
-	.rating		= 350,
+	.rating		= 400,
 	.read		= bfin_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.shift		= 22,
@@ -115,7 +115,7 @@ static cycle_t bfin_read_gptimer0(void)
 
 static struct clocksource bfin_cs_gptimer0 = {
 	.name		= "bfin_cs_gptimer0",
-	.rating		= 400,
+	.rating		= 350,
 	.read		= bfin_read_gptimer0,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 22,
-- 
cgit v1.2.3


From ea426e6c62d0f742d87451adc47e91d87b9c3d27 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 14 Sep 2009 19:42:26 +0000
Subject: Blackfin: unify cache init functions

The CPLB implementations (mpu/nompu) had exact copies of the cacheinit
code.  Even the i/d cache functions are largely the same.  So unify them
both in the common kernel cache code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/kernel/cplb-mpu/Makefile      |  2 +-
 arch/blackfin/kernel/cplb-mpu/cacheinit.c   | 71 -----------------------------
 arch/blackfin/kernel/cplb-nompu/Makefile    |  2 +-
 arch/blackfin/kernel/cplb-nompu/cacheinit.c | 71 -----------------------------
 arch/blackfin/mach-common/cache-c.c         | 44 +++++++++++++++++-
 5 files changed, 45 insertions(+), 145 deletions(-)
 delete mode 100644 arch/blackfin/kernel/cplb-mpu/cacheinit.c
 delete mode 100644 arch/blackfin/kernel/cplb-nompu/cacheinit.c

(limited to 'arch')

diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile
index 7d70d3bf321..394d0b1b28f 100644
--- a/arch/blackfin/kernel/cplb-mpu/Makefile
+++ b/arch/blackfin/kernel/cplb-mpu/Makefile
@@ -2,7 +2,7 @@
 # arch/blackfin/kernel/cplb-nompu/Makefile
 #
 
-obj-y := cplbinit.o cacheinit.o cplbmgr.o
+obj-y := cplbinit.o cplbmgr.o
 
 CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
 		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c
deleted file mode 100644
index a082681faa8..00000000000
--- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/cpu.h>
-
-#include <asm/cacheflush.h>
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/cplbinit.h>
-
-#if defined(CONFIG_BFIN_ICACHE)
-void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr);
-		bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data);
-	}
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= IMC | ENICPLB;
-	/* CSYNC to ensure load store ordering */
-	CSYNC();
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr);
-		bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data);
-	}
-
-	ctrl = bfin_read_DMEM_CONTROL();
-
-	/*
-	 *  Anomaly notes:
-	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
-	 *  register, so that the port preferences for DAG0 and DAG1 are set
-	 *  to port B
-	 */
-	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
-	/* CSYNC to ensure load store ordering */
-	CSYNC();
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile
index 7d70d3bf321..394d0b1b28f 100644
--- a/arch/blackfin/kernel/cplb-nompu/Makefile
+++ b/arch/blackfin/kernel/cplb-nompu/Makefile
@@ -2,7 +2,7 @@
 # arch/blackfin/kernel/cplb-nompu/Makefile
 #
 
-obj-y := cplbinit.o cacheinit.o cplbmgr.o
+obj-y := cplbinit.o cplbmgr.o
 
 CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \
 		    -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c
deleted file mode 100644
index a082681faa8..00000000000
--- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/cpu.h>
-
-#include <asm/cacheflush.h>
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/cplbinit.h>
-
-#if defined(CONFIG_BFIN_ICACHE)
-void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr);
-		bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data);
-	}
-	ctrl = bfin_read_IMEM_CONTROL();
-	ctrl |= IMC | ENICPLB;
-	/* CSYNC to ensure load store ordering */
-	CSYNC();
-	bfin_write_IMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
-{
-	unsigned long ctrl;
-	int i;
-
-	for (i = 0; i < MAX_CPLBS; i++) {
-		bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr);
-		bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data);
-	}
-
-	ctrl = bfin_read_DMEM_CONTROL();
-
-	/*
-	 *  Anomaly notes:
-	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
-	 *  register, so that the port preferences for DAG0 and DAG1 are set
-	 *  to port B
-	 */
-	ctrl |= DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0);
-	/* CSYNC to ensure load store ordering */
-	CSYNC();
-	bfin_write_DMEM_CONTROL(ctrl);
-	SSYNC();
-}
-#endif
diff --git a/arch/blackfin/mach-common/cache-c.c b/arch/blackfin/mach-common/cache-c.c
index b59ce3cb380..4ebbd78db3a 100644
--- a/arch/blackfin/mach-common/cache-c.c
+++ b/arch/blackfin/mach-common/cache-c.c
@@ -1,14 +1,16 @@
 /*
  * Blackfin cache control code (simpler control-style functions)
  *
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
  * Licensed under the GPL-2 or later.
  */
 
+#include <linux/init.h>
 #include <asm/blackfin.h>
+#include <asm/cplbinit.h>
 
 /* Invalidate the Entire Data cache by
  * clearing DMC[1:0] bits
@@ -34,3 +36,43 @@ void blackfin_invalidate_entire_icache(void)
 	SSYNC();
 }
 
+#if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE)
+
+static void
+bfin_cache_init(struct cplb_entry *cplb_tbl, unsigned long cplb_addr,
+                unsigned long cplb_data, unsigned long mem_control,
+                unsigned long mem_mask)
+{
+	int i;
+
+	for (i = 0; i < MAX_CPLBS; i++) {
+		bfin_write32(cplb_addr + i * 4, cplb_tbl[i].addr);
+		bfin_write32(cplb_data + i * 4, cplb_tbl[i].data);
+	}
+
+	_enable_cplb(mem_control, mem_mask);
+}
+
+#ifdef CONFIG_BFIN_ICACHE
+void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl)
+{
+	bfin_cache_init(icplb_tbl, ICPLB_ADDR0, ICPLB_DATA0, IMEM_CONTROL,
+		(IMC | ENICPLB));
+}
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl)
+{
+	/*
+	 *  Anomaly notes:
+	 *  05000287 - We implement workaround #2 - Change the DMEM_CONTROL
+	 *  register, so that the port preferences for DAG0 and DAG1 are set
+	 *  to port B
+	 */
+	bfin_cache_init(dcplb_tbl, DCPLB_ADDR0, DCPLB_DATA0, DMEM_CONTROL,
+		(DMEM_CNTR | PORT_PREF0 | (ANOMALY_05000287 ? PORT_PREF1 : 0)));
+}
+#endif
+
+#endif
-- 
cgit v1.2.3


From 3b67d91b3e2c789952379f5157704c2162330492 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Mon, 14 Sep 2009 21:22:06 +0000
Subject: Blackfin: fix elf_fpregset_t definition

The elf_fpregset_t type relied on an empty struct in the asm/user.h, but
the transition to asm-generic/user.h dropped that empty struct.  Rather
than restore this useless struct, define the only user (elf_fpregset_t)
as an empty struct itself.  This fixes building when ELF dump support is
enabled.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/elf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 5a87baf0659..c823e8ebbfa 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -23,7 +23,7 @@ typedef unsigned long elf_greg_t;
 #define ELF_NGREG 40 /* (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) */
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 
-typedef struct user_bfinfp_struct elf_fpregset_t;
+typedef struct { } elf_fpregset_t;
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-- 
cgit v1.2.3


From 5bf9cbef9972f851172391a37261b12bba63f733 Mon Sep 17 00:00:00 2001
From: Yi Li <yi.li@analog.com>
Date: Tue, 15 Sep 2009 09:24:31 +0000
Subject: Blackfin: update ftrace for latest toolchain

The mcount support that was finally added to the Blackfin gcc port isn't
exactly the same as what ftrace was developed against.  Now that the final
gcc version is in place, update the ftrace code to match.

While updating this, fix the swapped arguments to the tracer (signature is
(ip, parent_ip) while we were passing (parent_ip, ip)).

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
 arch/blackfin/include/asm/ftrace.h  |  2 +-
 arch/blackfin/kernel/ftrace-entry.S | 23 ++++++++++++-----------
 2 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 8643680f0f7..90c9b400ba6 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -8,6 +8,6 @@
 #ifndef __ASM_BFIN_FTRACE_H__
 #define __ASM_BFIN_FTRACE_H__
 
-#define MCOUNT_INSN_SIZE	8 /* sizeof mcount call: LINK + CALL */
+#define MCOUNT_INSN_SIZE	6 /* sizeof "[++sp] = rets; call __mcount;" */
 
 #endif
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
index 6980b7a0615..76dd4fbcd17 100644
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -17,8 +17,8 @@
  * only one we can blow away.  With pointer registers, we have P0-P2.
  *
  * Upon entry, the RETS will point to the top of the current profiled
- * function.  And since GCC setup the frame for us, the previous function
- * will be waiting there.  mmmm pie.
+ * function.  And since GCC pushed the previous RETS for us, the previous
+ * function will be waiting there.  mmmm pie.
  */
 ENTRY(__mcount)
 	/* save third function arg early so we can do testing below */
@@ -70,14 +70,14 @@ ENTRY(__mcount)
 	/* setup the tracer function */
 	p0 = r3;
 
-	/* tracer(ulong frompc, ulong selfpc):
-	 *  frompc: the pc that did the call to ...
-	 *  selfpc: ... this location
-	 * the selfpc itself will need adjusting for the mcount call
+	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
+	 *  ip: this point was called by ...
+	 *  parent_ip: ... this function
+	 * the ip itself will need adjusting for the mcount call
 	 */
-	r1 = rets;
-	r0 = [fp + 4];
-	r1 += -MCOUNT_INSN_SIZE;
+	r0 = rets;
+	r1 = [sp + 16];	/* skip the 4 local regs on stack */
+	r0 += -MCOUNT_INSN_SIZE;
 
 	/* call the tracer */
 	call (p0);
@@ -106,9 +106,10 @@ ENTRY(_ftrace_graph_caller)
 	[--sp] = r1;
 	[--sp] = rets;
 
-	r0 = fp;
+	/* prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) */
+	r0 = sp;
 	r1 = rets;
-	r0 += 4;
+	r0 += 16;	/* skip the 4 local regs on stack */
 	r1 += -MCOUNT_INSN_SIZE;
 	call _prepare_ftrace_return;
 
-- 
cgit v1.2.3


From 9973affe9bbcde64041890d8793eb2e74143c298 Mon Sep 17 00:00:00 2001
From: Chen Liqin <liqin.chen@sunplusct.com>
Date: Thu, 17 Sep 2009 12:05:56 +0800
Subject: score: add TIF_NOTIFY_RESUME define in asm/thread_info.h

---
 arch/score/include/asm/thread_info.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/score/include/asm/thread_info.h b/arch/score/include/asm/thread_info.h
index 0af8ca074c8..3a112288552 100644
--- a/arch/score/include/asm/thread_info.h
+++ b/arch/score/include/asm/thread_info.h
@@ -85,6 +85,7 @@ register struct thread_info *__current_thread_info __asm__("r28");
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
 #define TIF_SIGPENDING		1	/* signal pending */
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling
 						 TIF_NEED_RESCHED */
@@ -93,6 +94,7 @@ register struct thread_info *__current_thread_info __asm__("r28");
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 
-- 
cgit v1.2.3


From 064a16dc41be879d12bd5de5d2f9d38d890e0ee7 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Wed, 16 Sep 2009 11:34:34 +0000
Subject: sh: mach-ecovec24: Add user debug switch support

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index bbe601d4209..96bc1698310 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -638,6 +638,16 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 	gpio_request(GPIO_FN_KEYIN0,      NULL);
 
+	/* enable user debug switch */
+	gpio_request(GPIO_PTR0, NULL);
+	gpio_request(GPIO_PTR4, NULL);
+	gpio_request(GPIO_PTR5, NULL);
+	gpio_request(GPIO_PTR6, NULL);
+	gpio_direction_input(GPIO_PTR0);
+	gpio_direction_input(GPIO_PTR4);
+	gpio_direction_input(GPIO_PTR5);
+	gpio_direction_input(GPIO_PTR6);
+
 	/* enable I2C device */
 	i2c_register_board_info(1, i2c1_devices,
 				ARRAY_SIZE(i2c1_devices));
-- 
cgit v1.2.3


From 9312fffbad5661a0ad52b5ca5a04875c763a35fa Mon Sep 17 00:00:00 2001
From: Amit Kucheria <amit.kucheria@verdurent.com>
Date: Thu, 27 Aug 2009 20:27:57 +0200
Subject: mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board

Add support for Dynamic Power Switching (DPS) for the RX51 board.

These scripts are still a work-in-progress. I'll keep sending patches to
update the scripts as they are optimised.

Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 122 ++++++++++++++++++++++++++-
 1 file changed, 120 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 56d931a425f..e70baa79901 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-omap2/board-rx51-flash.c
+ * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
  *
  * Copyright (C) 2008-2009 Nokia
  *
@@ -282,7 +282,124 @@ static struct twl4030_usb_data rx51_usb_data = {
 	.usb_mode		= T2_USB_MODE_ULPI,
 };
 
-static struct twl4030_platform_data rx51_twldata = {
+static struct twl4030_ins sleep_on_seq[] __initdata = {
+/*
+ * Turn off VDD1 and VDD2.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
+/*
+ * And also turn off the OMAP3 PLLs and the sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
+};
+
+static struct twl4030_script sleep_on_script __initdata = {
+	.script = sleep_on_seq,
+	.size   = ARRAY_SIZE(sleep_on_seq),
+	.flags  = TWL4030_SLEEP_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_seq[] __initdata = {
+/*
+ * Reenable the OMAP3 PLLs.
+ * Wakeup VDD1 and VDD2.
+ * Reenable sysclk output.
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
+	{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_script __initdata = {
+	.script	= wakeup_seq,
+	.size	= ARRAY_SIZE(wakeup_seq),
+	.flags	= TWL4030_WAKEUP12_SCRIPT,
+};
+
+static struct twl4030_ins wakeup_p3_seq[] __initdata = {
+/*
+ * Wakeup VDD1 (dummy to be able to insert a delay)
+ * Enable CLKEN
+ */
+	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
+};
+
+static struct twl4030_script wakeup_p3_script __initdata = {
+	.script	= wakeup_p3_seq,
+	.size	= ARRAY_SIZE(wakeup_p3_seq),
+	.flags	= TWL4030_WAKEUP3_SCRIPT,
+};
+
+static struct twl4030_ins wrst_seq[] __initdata = {
+/*
+ * Reset twl4030.
+ * Reset VDD1 regulator.
+ * Reset VDD2 regulator.
+ * Reset VPLL1 regulator.
+ * Enable sysclk output.
+ * Reenable twl4030.
+ */
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
+		0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
+	{MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
+};
+
+static struct twl4030_script wrst_script __initdata = {
+	.script = wrst_seq,
+	.size   = ARRAY_SIZE(wrst_seq),
+	.flags  = TWL4030_WRST_SCRIPT,
+};
+
+static struct twl4030_script *twl4030_scripts[] __initdata = {
+	/* wakeup12 script should be loaded before sleep script, otherwise a
+	   board might hit retention before loading of wakeup script is
+	   completed. This can cause boot failures depending on timing issues.
+	*/
+	&wakeup_script,
+	&sleep_on_script,
+	&wakeup_p3_script,
+	&wrst_script,
+};
+
+static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
+	{ .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
+	{ .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
+	{ .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
+	  .type2 = 3},
+	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
+		.type2 = 1 },
+	{ 0, 0},
+};
+
+static struct twl4030_power_data rx51_t2scripts_data __initdata = {
+	.scripts        = twl4030_scripts,
+	.num = ARRAY_SIZE(twl4030_scripts),
+	.resource_config = twl4030_rconfig,
+};
+
+
+
+static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
 
@@ -291,6 +408,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
 	.usb			= &rx51_usb_data,
+	.power			= &rx51_t2scripts_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,
-- 
cgit v1.2.3


From ebdb5ab81c6b9fda130975d50fd6f43cb15c4ce6 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 6 Jul 2009 14:57:48 +0100
Subject: ARM: S3C64XX: Provide for board-specific IRQs

Set up some IRQ space to allocation to off-SoC interrupt controllers.
Default this to 16 IRQs. If individual boards require more than this
then they will need to modify this file so allocating a small number
helps reduce the number of modifications required.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c64xx/include/plat/irqs.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index 743a70094d0..7956fd3bb19 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -194,9 +194,17 @@
 
 #define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
 
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#define IRQ_BOARD_NR 16
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
 /* Set the default NR_IRQS */
 
-#define NR_IRQS	(IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#define NR_IRQS	(IRQ_BOARD_END + 1)
 
 #endif /* __ASM_PLAT_S3C64XX_IRQS_H */
 
-- 
cgit v1.2.3


From d23b3517400e4638e76e8c8667c100721c6f03fe Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 17 Sep 2009 00:01:54 +0100
Subject: ARM: S3C: Add missing selection of S3C_DEV_NAND in machine Kconfigs.

A number of machines that need s3c_device_nand present do not select
this in their Kconfig entries. Add the necessary selection of the
configuration S3C_DEV_NAND so that we avoid the following error:

arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io':
arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts':
arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init':
arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig | 5 +++++
 arch/arm/mach-s3c2412/Kconfig | 3 +++
 arch/arm/mach-s3c2440/Kconfig | 6 ++++++
 arch/arm/mach-s3c6400/Kconfig | 1 +
 arch/arm/mach-s3c6410/Kconfig | 1 +
 5 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index d8c023d4df3..3d4e9da3fa5 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -77,6 +77,7 @@ config ARCH_H1940
 	select CPU_S3C2410
 	select PM_H1940 if PM
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -89,6 +90,7 @@ config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -103,6 +105,7 @@ config ARCH_BAST
 	select S3C24XX_DCLK
 	select ISA
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -111,6 +114,7 @@ config MACH_OTOM
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -154,6 +158,7 @@ config MACH_QT2410
 	bool "QT2410"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 35c1bde89cf..c2bdc4635d1 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -48,6 +48,7 @@ config MACH_JIVE
 	bool "Logitech Jive"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -61,6 +62,7 @@ config MACH_SMDK2413
 	select MACH_S3C2413
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -84,6 +86,7 @@ config MACH_VSTMS
 	bool "VMSTMS"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8ae1b288f7f..d7bba919a77 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -48,6 +48,7 @@ config MACH_OSIRIS
 	select S3C2440_XTAL_12000000
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -57,6 +58,7 @@ config MACH_RX3715
 	select CPU_S3C2440
 	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
 
@@ -66,6 +68,7 @@ config ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the SMDK2440.
 
@@ -74,6 +77,7 @@ config MACH_NEXCODER_2440
  	select CPU_S3C2440
 	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -88,6 +92,7 @@ config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
@@ -97,6 +102,7 @@ config MACH_MINI2440
 	select EEPROM_AT24
 	select LEDS_TRIGGER_BACKLIGHT
 	select SND_S3C24XX_SOC_S3C24XX_UDA134X
+	select S3C_DEV_NAND
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index f5af212066c..770b72067e3 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -26,6 +26,7 @@ config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
 	select S3C6400_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index f9d0f09f976..53fc3ff657f 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -102,6 +102,7 @@ config MACH_HMT
 	bool "Airgoo HMT"
 	select CPU_S3C6410
 	select S3C_DEV_FB
+	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	select S3C64XX_SETUP_FB_24BPP
 	select HAVE_PWM
-- 
cgit v1.2.3


From e3bf887d73309808d47c74f2f024d2497c8f7048 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 28 Aug 2009 12:29:58 +0100
Subject: MIPS: Fix potencial build error in <asm/delay.h>

<asm/delay.h> will break if HZ isn't defined.  In 2.6.26 and later we're
usually lucky ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/delay.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h
index d2d8949be6b..e7cd78277c2 100644
--- a/arch/mips/include/asm/delay.h
+++ b/arch/mips/include/asm/delay.h
@@ -11,6 +11,8 @@
 #ifndef _ASM_DELAY_H
 #define _ASM_DELAY_H
 
+#include <linux/param.h>
+
 extern void __delay(unsigned int loops);
 extern void __ndelay(unsigned int ns);
 extern void __udelay(unsigned int us);
-- 
cgit v1.2.3


From 2608441164fde82b7fc0dd050ca0c46be0df23f8 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 20 Aug 2009 12:35:53 -0700
Subject: MIPS: Octeon: Check all CCAs in cvmx_write_csr.

The current code only checks CCA of 0 when deciding if a dummy read is
needed.  Since the kernel can (and does) use other CCAs we need to
mask out the CCA bits from the address.  Since the address constant
now fits in 16 bits, there is an added benefit that smaller code is
generated.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/octeon/cvmx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index e31e3fe14f8..9d9381e2e3d 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -271,7 +271,7 @@ static inline void cvmx_write_csr(uint64_t csr_addr, uint64_t val)
 	 * what RSL read we do, so we choose CVMX_MIO_BOOT_BIST_STAT
 	 * because it is fast and harmless.
 	 */
-	if ((csr_addr >> 40) == (0x800118))
+	if (((csr_addr >> 40) & 0x7ffff) == (0x118))
 		cvmx_read64(CVMX_MIO_BOOT_BIST_STAT);
 }
 
-- 
cgit v1.2.3


From 6de4c6f9c8ead69d2f423ea80a384ef98bb4b3f8 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Wed, 12 Aug 2009 23:59:27 +0400
Subject: MIPS: Lasat: Fix compilation

Header needed for current_cpu_data which expands to smp_processor_id().
However, linux/smp.h can't be included into asm/cpu-info.h due to horrible
circular dependencies, so plug it here.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/lasat/lasat.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h
index caeba1e302a..a1ada1c27c1 100644
--- a/arch/mips/include/asm/lasat/lasat.h
+++ b/arch/mips/include/asm/lasat/lasat.h
@@ -227,6 +227,7 @@ extern void lasat_write_eeprom_info(void);
  * It is used for the bit-banging rtc and eeprom drivers */
 
 #include <linux/delay.h>
+#include <linux/smp.h>
 
 /* calculating with the slowest board with 100 MHz clock */
 #define LASAT_100_DIVIDER 20
-- 
cgit v1.2.3


From 75f453164178a1749297fc466300bf3e34ef8103 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Fri, 28 Aug 2009 11:26:58 +0200
Subject: MIPS: Alchemy: add gpio_request/gpio_free stubs for CONFIG_GPIOLIB=n

Some drivers use gpio_request/gpio_free regardless of whether
gpiolib is actually built;  add stubs to work around the ensuing
compile failures.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-au1x00/gpio-au1000.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 127d4ed9f07..feea00148b5 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -578,6 +578,15 @@ static inline int irq_to_gpio(int irq)
 	return alchemy_irq_to_gpio(irq);
 }
 
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
 #endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
 
 
-- 
cgit v1.2.3


From 99502d94c3649c5c5e6e81e323caf422a2f1591c Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 31 Jul 2009 16:58:17 -0400
Subject: MIPS: make page.h constants available to assembly.

page.h includes ifndef __ASSEMBLY__ guards, but PAGE_SIZE and some other
constants are defined using "1UL", which the assembler does not support.
Use the _AC macro from const.h to make them available to assembly (and
linker scripts).

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/page.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 4320239cf4e..f266295cce5 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -10,6 +10,7 @@
 #define _ASM_PAGE_H
 
 #include <spaces.h>
+#include <linux/const.h>
 
 /*
  * PAGE_SHIFT determines the page size
@@ -29,12 +30,12 @@
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PAGE_SHIFT	16
 #endif
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
 
 #ifdef CONFIG_HUGETLB_PAGE
 #define HPAGE_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
-#define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
+#define HPAGE_SIZE	(_AC(1,UL) << HPAGE_SHIFT)
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #endif /* CONFIG_HUGETLB_PAGE */
-- 
cgit v1.2.3


From 13680ade4e57090a8ccad332e84e1f3d48b67125 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Fri, 4 Sep 2009 22:09:04 +0900
Subject: MIPS: TXx9: Disable PM capability of TX493[89] internal ether

Some TC35815 variants (i.e. TX493[89] internal ether) report existance of
PM registers though they are not supported.  Disable PM features by
clearing pdev->pm_cap.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/pci.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 7b637a7c0e6..707cfa9c547 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -341,6 +341,15 @@ static void quirk_slc90e66_ide(struct pci_dev *dev)
 }
 #endif /* CONFIG_TOSHIBA_FPCIB0 */
 
+static void tc35815_fixup(struct pci_dev *dev)
+{
+	/* This device may have PM registers but not they are not suported. */
+	if (dev->pm_cap) {
+		dev_info(&dev->dev, "PM disabled\n");
+		dev->pm_cap = 0;
+	}
+}
+
 static void final_fixup(struct pci_dev *dev)
 {
 	unsigned char bist;
@@ -374,6 +383,10 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
 	quirk_slc90e66_ide);
 #endif
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
+			PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
+			PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup);
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
 DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
 
-- 
cgit v1.2.3


From 70ebadc8e30efef3bf21ba94b3571537de8bcf4e Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 13 Sep 2009 21:15:18 +0200
Subject: MIPS: TXx9: Fix error handling.

Error handling code following a kzalloc should free the allocated data.
Error handling code following an ioremap should iounmap the allocated data.

The semantic match that finds the first problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/setup.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index a205e2ba8e7..c860810722c 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -782,7 +782,7 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 		return;
 	iocled->mmioaddr = ioremap(baseaddr, 1);
 	if (!iocled->mmioaddr)
-		return;
+		goto out_free;
 	iocled->chip.get = txx9_iocled_get;
 	iocled->chip.set = txx9_iocled_set;
 	iocled->chip.direction_input = txx9_iocled_dir_in;
@@ -791,13 +791,13 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	iocled->chip.base = basenum;
 	iocled->chip.ngpio = num;
 	if (gpiochip_add(&iocled->chip))
-		return;
+		goto out_unmap;
 	if (basenum < 0)
 		basenum = iocled->chip.base;
 
 	pdev = platform_device_alloc("leds-gpio", basenum);
 	if (!pdev)
-		return;
+		goto out_gpio;
 	iocled->pdata.num_leds = num;
 	iocled->pdata.leds = iocled->leds;
 	for (i = 0; i < num; i++) {
@@ -812,7 +812,16 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	}
 	pdev->dev.platform_data = &iocled->pdata;
 	if (platform_device_add(pdev))
-		platform_device_put(pdev);
+		goto out_pdev;
+	return;
+out_pdev:
+	platform_device_put(pdev);
+out_gpio:
+	gpio_remove(&iocled->chip);
+out_unmap:
+	iounmap(iocled->mmioaddr);
+out_free:
+	kfree(iocled);
 }
 #else /* CONFIG_LEDS_GPIO */
 void __init txx9_iocled_init(unsigned long baseaddr,
-- 
cgit v1.2.3


From 7e17615c45980fc34d3f7d04bc7063cfc32180ec Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 15 Sep 2009 13:36:13 +0200
Subject: MIPS: Get rid of duplicate cpu_idle() prototype.

Since 2.6.11-rc1 there is a prototype in <linux/smp.h>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/smp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index bc7d9b05e2f..64668a93248 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -32,6 +32,7 @@
 #include <linux/cpumask.h>
 #include <linux/cpu.h>
 #include <linux/err.h>
+#include <linux/smp.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
@@ -49,8 +50,6 @@ volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
 int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
 int __cpu_logical_map[NR_CPUS];		/* Map logical to physical */
 
-extern void cpu_idle(void);
-
 /* Number of TCs (or siblings in Intel speak) per CPU core */
 int smp_num_siblings = 1;
 EXPORT_SYMBOL(smp_num_siblings);
-- 
cgit v1.2.3


From 1f320d053c666567a8e440ebcec4ed7f7006b006 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 15 Sep 2009 14:50:39 +0200
Subject: MIPS: Malta: Convert reset initialization to initcall.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mti-malta/malta-reset.c | 7 ++++++-
 arch/mips/mti-malta/malta-setup.c | 1 -
 2 files changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
index f48d60e8429..32942053624 100644
--- a/arch/mips/mti-malta/malta-reset.c
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -22,6 +22,7 @@
  * Reset the MIPS boards.
  *
  */
+#include <linux/init.h>
 #include <linux/pm.h>
 
 #include <asm/io.h>
@@ -45,9 +46,13 @@ static void mips_machine_halt(void)
 }
 
 
-void mips_reboot_setup(void)
+static int __init mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
 	_machine_halt = mips_machine_halt;
 	pm_power_off = mips_machine_halt;
+
+	return 0;
 }
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index dc78b8983ee..b7f37d4982f 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -218,7 +218,6 @@ void __init plat_mem_setup(void)
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	screen_info_setup();
 #endif
-	mips_reboot_setup();
 
 	board_be_init = malta_be_init;
 	board_be_handler = malta_be_handler;
-- 
cgit v1.2.3


From 38c9fb743f0d6e9dd8ee45e3e6247bc7d147c4de Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 15 Sep 2009 15:00:02 +0200
Subject: MIPS: Fulong: Convert reset initialization to initcall.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mips-boards/generic.h | 2 --
 arch/mips/lemote/lm2e/reset.c               | 7 ++++++-
 arch/mips/lemote/lm2e/setup.c               | 3 ---
 3 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
index c0da1a881e3..46c08563e53 100644
--- a/arch/mips/include/asm/mips-boards/generic.h
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -87,8 +87,6 @@
 
 extern int mips_revision_sconid;
 
-extern void mips_reboot_setup(void);
-
 #ifdef CONFIG_PCI
 extern void mips_pcibios_init(void);
 #else
diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c
index 099387a3827..2e64bf6929e 100644
--- a/arch/mips/lemote/lm2e/reset.c
+++ b/arch/mips/lemote/lm2e/reset.c
@@ -7,6 +7,7 @@
  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  */
+#include <linux/init.h>
 #include <linux/pm.h>
 
 #include <asm/reboot.h>
@@ -33,9 +34,13 @@ static void loongson2e_power_off(void)
 	loongson2e_halt();
 }
 
-void mips_reboot_setup(void)
+static int __init mips_reboot_setup(void)
 {
 	_machine_restart = loongson2e_restart;
 	_machine_halt = loongson2e_halt;
 	pm_power_off = loongson2e_power_off;
+
+	return 0;
 }
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c
index ebd6ceaef2f..79dae630611 100644
--- a/arch/mips/lemote/lm2e/setup.c
+++ b/arch/mips/lemote/lm2e/setup.c
@@ -41,8 +41,6 @@
 #include <linux/screen_info.h>
 #endif
 
-extern void mips_reboot_setup(void);
-
 unsigned long cpu_clock_freq;
 unsigned long bus_clock;
 unsigned int memsize;
@@ -77,7 +75,6 @@ void __init plat_mem_setup(void)
 {
 	set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE,
 				IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1));
-	mips_reboot_setup();
 
 	__wbflush = wbflush_loongson2e;
 
-- 
cgit v1.2.3


From 03bf6ad9d8b4d2f490fe08812e2c8a461219c91c Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 15 Sep 2009 22:58:23 +0200
Subject: MIPS: FW: Build with -Werror

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/fw/arc/Makefile | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/fw/arc/Makefile b/arch/mips/fw/arc/Makefile
index 4f349ec1ea2..e0aaad482b0 100644
--- a/arch/mips/fw/arc/Makefile
+++ b/arch/mips/fw/arc/Makefile
@@ -8,3 +8,5 @@ lib-y				+= cmdline.o env.o file.o identify.o init.o \
 lib-$(CONFIG_ARC_MEMORY)	+= memory.o
 lib-$(CONFIG_ARC_CONSOLE)	+= arc_con.o
 lib-$(CONFIG_ARC_PROMLIB)	+= promlib.o
+
+EXTRA_CFLAGS			+= -Werror
-- 
cgit v1.2.3


From eb42306b7a45703815e898a4742507c08ca01860 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 15 Sep 2009 23:04:59 +0200
Subject: MIPS: IP22, IP28: Build with -Werror

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip22/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index ef1564e40c8..416b18f9fa7 100644
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -10,4 +10,4 @@ obj-$(CONFIG_SGI_IP22) += ip22-berr.o
 obj-$(CONFIG_SGI_IP28) += ip28-berr.o
 obj-$(CONFIG_EISA)	+= ip22-eisa.o
 
-# EXTRA_CFLAGS += -Werror
+EXTRA_CFLAGS += -Werror
-- 
cgit v1.2.3


From efc49ef556b135739386c64fd5c2ecd99b300446 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:18:09 +0800
Subject: MIPS: Loongson: Remove existing early_printk implementation

Removes the existing implementation of early_printk for fulong.  The old
implementation was based on the outdated board-specific dbg_io.c.

Since commit 8d60a903d986ffa26c41f0092320a3b9da20bfaf dbg_io.c is not longer
needed; it will be removed by the next patch, and a new implementation of
early_printk will be added later.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/lemote/lm2e/prom.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/lemote/lm2e/prom.c b/arch/mips/lemote/lm2e/prom.c
index 7edc15dfed6..d78cedf28c1 100644
--- a/arch/mips/lemote/lm2e/prom.c
+++ b/arch/mips/lemote/lm2e/prom.c
@@ -21,7 +21,6 @@
 extern unsigned long bus_clock;
 extern unsigned long cpu_clock_freq;
 extern unsigned int memsize, highmemsize;
-extern int putDebugChar(unsigned char byte);
 
 static int argc;
 /* pmon passes arguments in 32bit pointers */
@@ -90,8 +89,3 @@ do {									\
 void __init prom_free_prom_memory(void)
 {
 }
-
-void prom_putchar(char c)
-{
-	putDebugChar(c);
-}
-- 
cgit v1.2.3


From 95ff7c955376d5bd52f044f445ea04eab4fb0f9a Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:19:33 +0800
Subject: MIPS: Loongson: Remove out-of-date board-specific kgdb source code

Since the re-implementation of kgdb by commit
8854700115ecf8aa6f087aa915b7b6cf18090d39 the platform-specific version
has become superfluous, remove it.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/lemote/lm2e/Makefile |   2 +-
 arch/mips/lemote/lm2e/dbg_io.c | 146 -----------------------------------------
 2 files changed, 1 insertion(+), 147 deletions(-)
 delete mode 100644 arch/mips/lemote/lm2e/dbg_io.c

(limited to 'arch')

diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile
index d34671d1b89..b0c03390241 100644
--- a/arch/mips/lemote/lm2e/Makefile
+++ b/arch/mips/lemote/lm2e/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Lemote Fulong mini-PC board.
 #
 
-obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o
+obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o mem.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/lemote/lm2e/dbg_io.c b/arch/mips/lemote/lm2e/dbg_io.c
deleted file mode 100644
index 6c95da3ca76..00000000000
--- a/arch/mips/lemote/lm2e/dbg_io.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <asm/serial.h>
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-#ifdef CONFIG_64BIT
-#define         BASE                    (0xffffffffbfd003f8)
-#else
-#define         BASE                    (0xbfd003f8)
-#endif
-
-#define         MAX_BAUD                BASE_BAUD
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              1
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)	readb((char *)BASE + (y))
-#define         UART16550_WRITE(y, z)	writeb(z, (char *)BASE + (y))
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	u32 divisor;
-
-	/* disable interrupts */
-	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-	/* set up buad rate */
-	/* set DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-	/* set divisor */
-	divisor = MAX_BAUD / baud;
-	UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-	UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-	/* clear DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-
-	/* set data format */
-	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0) ;
-	return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		/*
-		   debugInit(UART16550_BAUD_115200,
-		   UART16550_DATA_8BIT,
-		   UART16550_PARITY_NONE, UART16550_STOP_1BIT); */
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0) ;
-	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-	return 1;
-}
-- 
cgit v1.2.3


From f6a2740d0c1b3fd0d3cc8ec17e232f82f2d8b14c Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:20:20 +0800
Subject: MIPS: Loongson: Add new early_printk implmentation

This patch is based on the implementation in the lm2e-fixes branch of
Philippe's git://git.linux-cisco.org/linux-mips.git and the
malta-specific early_printk implementation.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/lemote/lm2e/Makefile       |  5 +++++
 arch/mips/lemote/lm2e/early_printk.c | 41 ++++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/mips/lemote/lm2e/early_printk.c

(limited to 'arch')

diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile
index b0c03390241..f19173252d6 100644
--- a/arch/mips/lemote/lm2e/Makefile
+++ b/arch/mips/lemote/lm2e/Makefile
@@ -4,4 +4,9 @@
 
 obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o mem.o
 
+#
+# Early printk support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/lemote/lm2e/early_printk.c b/arch/mips/lemote/lm2e/early_printk.c
new file mode 100644
index 00000000000..811c7dec1ed
--- /dev/null
+++ b/arch/mips/lemote/lm2e/early_printk.c
@@ -0,0 +1,41 @@
+/*  early printk support
+ *
+ *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ *  Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+
+#include <asm/mips-boards/bonito64.h>
+
+#define UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
+
+#define PORT(base, offset) (u8 *)(base + offset)
+
+static inline unsigned int serial_in(phys_addr_t base, int offset)
+{
+	return readb(PORT(base, offset));
+}
+
+static inline void serial_out(phys_addr_t base, int offset, int value)
+{
+	writeb(value, PORT(base, offset));
+}
+
+void prom_putchar(char c)
+{
+	phys_addr_t uart_base =
+		(phys_addr_t) ioremap_nocache(UART_BASE, 8);
+
+	while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(uart_base, UART_TX, c);
+}
-- 
cgit v1.2.3


From 8f0de87fa97667fa05c7bc938396ec759f021a21 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:20:56 +0800
Subject: MIPS: Loongson: pm: Remove redundant source code

The implmentation of loongson2e_power_off and loongson2e_halt is almostly
the same, just preserve one of them.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/lemote/lm2e/reset.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c
index 2e64bf6929e..a6499a20078 100644
--- a/arch/mips/lemote/lm2e/reset.c
+++ b/arch/mips/lemote/lm2e/reset.c
@@ -29,16 +29,11 @@ static void loongson2e_halt(void)
 	while (1) ;
 }
 
-static void loongson2e_power_off(void)
-{
-	loongson2e_halt();
-}
-
 static int __init mips_reboot_setup(void)
 {
 	_machine_restart = loongson2e_restart;
 	_machine_halt = loongson2e_halt;
-	pm_power_off = loongson2e_power_off;
+	pm_power_off = loongson2e_halt;
 
 	return 0;
 }
-- 
cgit v1.2.3


From f256a5775a357e2527c7bbfb59c125c4c4c356ad Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:21:27 +0800
Subject: MIPS: Loongson: pm: clean up the reboot support

Several magic numbers have been replaced by relative macros, which will be
more readable and understandable.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/lemote/lm2e/reset.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c
index a6499a20078..0faa140f403 100644
--- a/arch/mips/lemote/lm2e/reset.c
+++ b/arch/mips/lemote/lm2e/reset.c
@@ -6,22 +6,24 @@
  *
  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Zhangjin Wu, wuzj@lemote.com
  */
 #include <linux/init.h>
 #include <linux/pm.h>
+#include <linux/io.h>
 
 #include <asm/reboot.h>
+#include <asm/mips-boards/bonito64.h>
 
 static void loongson2e_restart(char *command)
 {
-#ifdef CONFIG_32BIT
-	*(unsigned long *)0xbfe00104 &= ~(1 << 2);
-	*(unsigned long *)0xbfe00104 |= (1 << 2);
-#else
-	*(unsigned long *)0xffffffffbfe00104 &= ~(1 << 2);
-	*(unsigned long *)0xffffffffbfe00104 |= (1 << 2);
-#endif
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
+	/* do preparation for reboot */
+	BONITO_BONGENCFG &= ~(1 << 2);
+	BONITO_BONGENCFG |= (1 << 2);
+
+	/* reboot via jumping to boot base address */
+	((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
 }
 
 static void loongson2e_halt(void)
-- 
cgit v1.2.3


From f54a40ee6b3cb4da638d7705e433bc80aa4f49f6 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:22:11 +0800
Subject: MIPS: Loongson: PCI: use existing mips_io_port_base

mips_io_port_base is initialized via set_io_port_base() in
arch/mips/lemote/lm2e/setup.c, we can use it directly here.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/lemote/lm2e/pci.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c
index 8be03a8e1ad..152efb65bba 100644
--- a/arch/mips/lemote/lm2e/pci.c
+++ b/arch/mips/lemote/lm2e/pci.c
@@ -84,10 +84,7 @@ static int __init pcibios_init(void)
 {
 	ict_pcimap();
 
-	loongson2e_pci_controller.io_map_base =
-	    (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE,
-				    loongson2e_pci_io_resource.end -
-				    loongson2e_pci_io_resource.start + 1);
+	loongson2e_pci_controller.io_map_base = mips_io_port_base;
 
 	register_pci_controller(&loongson2e_pci_controller);
 
-- 
cgit v1.2.3


From bd92aa013e8fcd17328ec8e060477761cf3380d9 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:22:36 +0800
Subject: MIPS: Loongson: Split the implementation of prom and setup parts

This patch split the old initilization and setup implementation to
several file, one file one logic function.

the other main changes include:

	1. as the script/checkpatch.pl suggests, use strict_strtol instead
	of simple_strtol in arch/mips/lemote/lm2e/cmdline.c

	2. use the existed macros in asm/mips-boards/bonito64.h as the
	arguments of set_io_port_base() and remove the un-needed ones in
	asm/mach-lemote/pci.h

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-lemote/pci.h |  1 -
 arch/mips/lemote/lm2e/Makefile          |  3 +-
 arch/mips/lemote/lm2e/cmdline.c         | 53 +++++++++++++++++++
 arch/mips/lemote/lm2e/env.c             | 60 ++++++++++++++++++++++
 arch/mips/lemote/lm2e/init.c            | 34 ++++++++++++
 arch/mips/lemote/lm2e/machtype.c        | 15 ++++++
 arch/mips/lemote/lm2e/mem.c             | 13 +++++
 arch/mips/lemote/lm2e/prom.c            | 91 ---------------------------------
 arch/mips/lemote/lm2e/setup.c           | 34 +-----------
 arch/mips/lemote/lm2e/time.c            | 30 +++++++++++
 10 files changed, 208 insertions(+), 126 deletions(-)
 create mode 100644 arch/mips/lemote/lm2e/cmdline.c
 create mode 100644 arch/mips/lemote/lm2e/env.c
 create mode 100644 arch/mips/lemote/lm2e/init.c
 create mode 100644 arch/mips/lemote/lm2e/machtype.c
 delete mode 100644 arch/mips/lemote/lm2e/prom.c
 create mode 100644 arch/mips/lemote/lm2e/time.c

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-lemote/pci.h
index ea6aa143b78..0307e493526 100644
--- a/arch/mips/include/asm/mach-lemote/pci.h
+++ b/arch/mips/include/asm/mach-lemote/pci.h
@@ -25,6 +25,5 @@
 #define LOONGSON2E_PCI_MEM_START	0x14000000UL
 #define LOONGSON2E_PCI_MEM_END		0x1fffffffUL
 #define LOONGSON2E_PCI_IO_START		0x00004000UL
-#define LOONGSON2E_IO_PORT_BASE		0x1fd00000UL
 
 #endif /* !_LEMOTE_PCI_H_ */
diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile
index f19173252d6..a5bc1efc362 100644
--- a/arch/mips/lemote/lm2e/Makefile
+++ b/arch/mips/lemote/lm2e/Makefile
@@ -2,7 +2,8 @@
 # Makefile for Lemote Fulong mini-PC board.
 #
 
-obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o mem.o
+obj-y += setup.o init.o reset.o irq.o pci.o bonito-irq.o mem.o \
+		env.o cmdline.o time.o machtype.o
 
 #
 # Early printk support
diff --git a/arch/mips/lemote/lm2e/cmdline.c b/arch/mips/lemote/lm2e/cmdline.c
new file mode 100644
index 00000000000..442b93587e8
--- /dev/null
+++ b/arch/mips/lemote/lm2e/cmdline.c
@@ -0,0 +1,53 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+
+int prom_argc;
+/* pmon passes arguments in 32bit pointers */
+int *_prom_argv;
+
+void __init prom_init_cmdline(void)
+{
+	int i;
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	prom_argc = fw_arg0;
+	_prom_argv = (int *)fw_arg1;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < prom_argc; i++) {
+		l = (long)_prom_argv[i];
+		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, ((char *)l));
+		strcat(arcs_cmdline, " ");
+	}
+
+	if ((strstr(arcs_cmdline, "console=")) == NULL)
+		strcat(arcs_cmdline, " console=ttyS0,115200");
+	if ((strstr(arcs_cmdline, "root=")) == NULL)
+		strcat(arcs_cmdline, " root=/dev/hda1");
+}
diff --git a/arch/mips/lemote/lm2e/env.c b/arch/mips/lemote/lm2e/env.c
new file mode 100644
index 00000000000..9e88409f7a3
--- /dev/null
+++ b/arch/mips/lemote/lm2e/env.c
@@ -0,0 +1,60 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+
+unsigned long bus_clock, cpu_clock_freq;
+unsigned long memsize, highmemsize;
+
+/* pmon passes arguments in 32bit pointers */
+int *_prom_envp;
+
+#define parse_even_earlier(res, option, p)				\
+do {									\
+	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
+			strict_strtol((char *)p + strlen(option"="),	\
+					10, &res);			\
+} while (0)
+
+void __init prom_init_env(void)
+{
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	_prom_envp = (int *)fw_arg2;
+
+	l = (long)*_prom_envp;
+	while (l != 0) {
+		parse_even_earlier(bus_clock, "busclock", l);
+		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
+		parse_even_earlier(memsize, "memsize", l);
+		parse_even_earlier(highmemsize, "highmemsize", l);
+		_prom_envp++;
+		l = (long)*_prom_envp;
+	}
+	if (memsize == 0)
+		memsize = 256;
+
+	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
+		bus_clock, cpu_clock_freq, memsize, highmemsize);
+}
diff --git a/arch/mips/lemote/lm2e/init.c b/arch/mips/lemote/lm2e/init.c
new file mode 100644
index 00000000000..6fe624d697e
--- /dev/null
+++ b/arch/mips/lemote/lm2e/init.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mips-boards/bonito64.h>
+
+extern void __init prom_init_cmdline(void);
+extern void __init prom_init_env(void);
+extern void __init prom_init_memory(void);
+
+void __init prom_init(void)
+{
+    /* init base address of io space */
+	set_io_port_base((unsigned long)
+		ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
+
+	prom_init_cmdline();
+	prom_init_env();
+	prom_init_memory();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/lemote/lm2e/machtype.c b/arch/mips/lemote/lm2e/machtype.c
new file mode 100644
index 00000000000..8d803eea787
--- /dev/null
+++ b/arch/mips/lemote/lm2e/machtype.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+const char *get_system_type(void)
+{
+	return "lemote-fulong";
+}
+
diff --git a/arch/mips/lemote/lm2e/mem.c b/arch/mips/lemote/lm2e/mem.c
index 16cd21587d3..f24af70b669 100644
--- a/arch/mips/lemote/lm2e/mem.c
+++ b/arch/mips/lemote/lm2e/mem.c
@@ -8,6 +8,19 @@
 #include <linux/fcntl.h>
 #include <linux/mm.h>
 
+#include <asm/bootinfo.h>
+
+extern unsigned long memsize, highmemsize;
+
+void __init prom_init_memory(void)
+{
+    add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+#ifdef CONFIG_64BIT
+    if (highmemsize > 0)
+		add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM);
+#endif /* CONFIG_64BIT */
+}
+
 /* override of arch/mips/mm/cache.c: __uncached_access */
 int __uncached_access(struct file *file, unsigned long addr)
 {
diff --git a/arch/mips/lemote/lm2e/prom.c b/arch/mips/lemote/lm2e/prom.c
deleted file mode 100644
index d78cedf28c1..00000000000
--- a/arch/mips/lemote/lm2e/prom.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-
-extern unsigned long bus_clock;
-extern unsigned long cpu_clock_freq;
-extern unsigned int memsize, highmemsize;
-
-static int argc;
-/* pmon passes arguments in 32bit pointers */
-static int *arg;
-static int *env;
-
-const char *get_system_type(void)
-{
-	return "lemote-fulong";
-}
-
-void __init prom_init_cmdline(void)
-{
-	int i;
-	long l;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < argc; i++) {
-		l = (long)arg[i];
-		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, ((char *)l));
-		strcat(arcs_cmdline, " ");
-	}
-}
-
-void __init prom_init(void)
-{
-	long l;
-	argc = fw_arg0;
-	arg = (int *)fw_arg1;
-	env = (int *)fw_arg2;
-
-	prom_init_cmdline();
-
-	if ((strstr(arcs_cmdline, "console=")) == NULL)
-		strcat(arcs_cmdline, " console=ttyS0,115200");
-	if ((strstr(arcs_cmdline, "root=")) == NULL)
-		strcat(arcs_cmdline, " root=/dev/hda1");
-
-#define parse_even_earlier(res, option, p)				\
-do {									\
-	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-		res = simple_strtol((char *)p + strlen(option"="),	\
-				    NULL, 10);				\
-} while (0)
-
-	l = (long)*env;
-	while (l != 0) {
-		parse_even_earlier(bus_clock, "busclock", l);
-		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
-		parse_even_earlier(memsize, "memsize", l);
-		parse_even_earlier(highmemsize, "highmemsize", l);
-		env++;
-		l = (long)*env;
-	}
-	if (memsize == 0)
-		memsize = 256;
-
-	pr_info("busclock=%ld, cpuclock=%ld,memsize=%d,highmemsize=%d\n",
-	       bus_clock, cpu_clock_freq, memsize, highmemsize);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c
index 79dae630611..03578cf0ee7 100644
--- a/arch/mips/lemote/lm2e/setup.c
+++ b/arch/mips/lemote/lm2e/setup.c
@@ -26,37 +26,16 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-#include <linux/bootmem.h>
 #include <linux/init.h>
-#include <linux/irq.h>
+#include <linux/module.h>
 
-#include <asm/bootinfo.h>
-#include <asm/mc146818-time.h>
-#include <asm/time.h>
 #include <asm/wbflush.h>
-#include <asm/mach-lemote/pci.h>
 
 #ifdef CONFIG_VT
 #include <linux/console.h>
 #include <linux/screen_info.h>
 #endif
 
-unsigned long cpu_clock_freq;
-unsigned long bus_clock;
-unsigned int memsize;
-unsigned int highmemsize = 0;
-
-void __init plat_time_init(void)
-{
-	/* setup mips r4k timer */
-	mips_hpt_frequency = cpu_clock_freq / 2;
-}
-
-unsigned long read_persistent_clock(void)
-{
-	return mc146818_get_cmos_time();
-}
-
 void (*__wbflush)(void);
 EXPORT_SYMBOL(__wbflush);
 
@@ -73,18 +52,8 @@ static void wbflush_loongson2e(void)
 
 void __init plat_mem_setup(void)
 {
-	set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE,
-				IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1));
-
 	__wbflush = wbflush_loongson2e;
 
-	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-#ifdef CONFIG_64BIT
-	if (highmemsize > 0) {
-		add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM);
-	}
-#endif
-
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
@@ -104,5 +73,4 @@ void __init plat_mem_setup(void)
 	conswitchp = &dummy_con;
 #endif
 #endif
-
 }
diff --git a/arch/mips/lemote/lm2e/time.c b/arch/mips/lemote/lm2e/time.c
new file mode 100644
index 00000000000..b9d3f11b620
--- /dev/null
+++ b/arch/mips/lemote/lm2e/time.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+
+extern unsigned long cpu_clock_freq;
+
+void __init plat_time_init(void)
+{
+	/* setup mips r4k timer */
+	mips_hpt_frequency = cpu_clock_freq / 2;
+}
+
+unsigned long read_persistent_clock(void)
+{
+	return mc146818_get_cmos_time();
+}
-- 
cgit v1.2.3


From 5e983ff654ca3df3007b5b558b5271bb4622afa4 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:23:03 +0800
Subject: MIPS: Loongson: clean up the coding style

With the help of script/checkpatch.pl, i have cleaned up the coding
style.

1. remove un-needed header files and tune some comments.
2. remove some un-needed { }

add a new header file loongson.h:

3. move some common header files to loongson.h
4. move some common extern declartions to loongson.h

and this new header file is needed for future loongson2f support.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-lemote/loongson.h | 36 +++++++++++++++++++++
 arch/mips/include/asm/mach-lemote/pci.h      |  8 +++--
 arch/mips/lemote/lm2e/bonito-irq.c           | 27 ++--------------
 arch/mips/lemote/lm2e/cmdline.c              |  5 ++-
 arch/mips/lemote/lm2e/early_printk.c         |  4 +--
 arch/mips/lemote/lm2e/env.c                  |  6 ++--
 arch/mips/lemote/lm2e/init.c                 |  6 +---
 arch/mips/lemote/lm2e/irq.c                  | 48 ++++------------------------
 arch/mips/lemote/lm2e/mem.c                  |  2 +-
 arch/mips/lemote/lm2e/pci.c                  | 26 ++-------------
 arch/mips/lemote/lm2e/reset.c                | 43 -------------------------
 arch/mips/lemote/lm2e/setup.c                | 22 ++-----------
 arch/mips/lemote/lm2e/time.c                 |  5 +--
 arch/mips/pci/fixup-lm2e.c                   | 18 -----------
 14 files changed, 62 insertions(+), 194 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-lemote/loongson.h
 delete mode 100644 arch/mips/lemote/lm2e/reset.c

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-lemote/loongson.h b/arch/mips/include/asm/mach-lemote/loongson.h
new file mode 100644
index 00000000000..76cc2bddfa4
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/loongson.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_MACH_LOONGSON_LOONGSON_H
+#define __ASM_MACH_LOONGSON_LOONGSON_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+
+/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */
+#include <asm/mips-boards/bonito64.h>
+
+/* loongson internal northbridge initialization */
+extern void bonito_irq_init(void);
+
+/* loongson-based machines specific reboot setup */
+extern void mips_reboot_setup(void);
+
+/* environment arguments from bootloader */
+extern unsigned long bus_clock, cpu_clock_freq;
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern void __init prom_init_memory(void);
+extern void __init prom_init_cmdline(void);
+extern void __init prom_init_env(void);
+
+#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-lemote/pci.h
index 0307e493526..92b2f59d890 100644
--- a/arch/mips/include/asm/mach-lemote/pci.h
+++ b/arch/mips/include/asm/mach-lemote/pci.h
@@ -19,11 +19,13 @@
  * 02139, USA.
  */
 
-#ifndef _LEMOTE_PCI_H_
-#define _LEMOTE_PCI_H_
+#ifndef __ASM_MACH_LEMOTE_PCI_H_
+#define __ASM_MACH_LEMOTE_PCI_H_
+
+extern struct pci_ops bonito64_pci_ops;
 
 #define LOONGSON2E_PCI_MEM_START	0x14000000UL
 #define LOONGSON2E_PCI_MEM_END		0x1fffffffUL
 #define LOONGSON2E_PCI_IO_START		0x00004000UL
 
-#endif /* !_LEMOTE_PCI_H_ */
+#endif /* !__ASM_MACH_LEMOTE_PCI_H_ */
diff --git a/arch/mips/lemote/lm2e/bonito-irq.c b/arch/mips/lemote/lm2e/bonito-irq.c
index 8fc3bce7075..3e31e7ad713 100644
--- a/arch/mips/lemote/lm2e/bonito-irq.c
+++ b/arch/mips/lemote/lm2e/bonito-irq.c
@@ -10,32 +10,10 @@
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/mips-boards/bonito64.h>
 
+#include <loongson.h>
 
 static inline void bonito_irq_enable(unsigned int irq)
 {
@@ -66,9 +44,8 @@ void bonito_irq_init(void)
 {
 	u32 i;
 
-	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++) {
+	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
 		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
-	}
 
 	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
 }
diff --git a/arch/mips/lemote/lm2e/cmdline.c b/arch/mips/lemote/lm2e/cmdline.c
index 442b93587e8..75f1b243ee4 100644
--- a/arch/mips/lemote/lm2e/cmdline.c
+++ b/arch/mips/lemote/lm2e/cmdline.c
@@ -17,11 +17,10 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
-#include <linux/io.h>
-#include <linux/init.h>
-
 #include <asm/bootinfo.h>
 
+#include <loongson.h>
+
 int prom_argc;
 /* pmon passes arguments in 32bit pointers */
 int *_prom_argv;
diff --git a/arch/mips/lemote/lm2e/early_printk.c b/arch/mips/lemote/lm2e/early_printk.c
index 811c7dec1ed..3e0a6eaa404 100644
--- a/arch/mips/lemote/lm2e/early_printk.c
+++ b/arch/mips/lemote/lm2e/early_printk.c
@@ -9,11 +9,9 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  */
-#include <linux/io.h>
-#include <linux/init.h>
 #include <linux/serial_reg.h>
 
-#include <asm/mips-boards/bonito64.h>
+#include <loongson.h>
 
 #define UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
 
diff --git a/arch/mips/lemote/lm2e/env.c b/arch/mips/lemote/lm2e/env.c
index 9e88409f7a3..b9ef5038554 100644
--- a/arch/mips/lemote/lm2e/env.c
+++ b/arch/mips/lemote/lm2e/env.c
@@ -17,12 +17,10 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
-
-#include <linux/io.h>
-#include <linux/init.h>
-
 #include <asm/bootinfo.h>
 
+#include <loongson.h>
+
 unsigned long bus_clock, cpu_clock_freq;
 unsigned long memsize, highmemsize;
 
diff --git a/arch/mips/lemote/lm2e/init.c b/arch/mips/lemote/lm2e/init.c
index 6fe624d697e..3abe927422a 100644
--- a/arch/mips/lemote/lm2e/init.c
+++ b/arch/mips/lemote/lm2e/init.c
@@ -8,15 +8,11 @@
  * option) any later version.
  */
 
-#include <linux/init.h>
 #include <linux/bootmem.h>
 
 #include <asm/bootinfo.h>
-#include <asm/mips-boards/bonito64.h>
 
-extern void __init prom_init_cmdline(void);
-extern void __init prom_init_env(void);
-extern void __init prom_init_memory(void);
+#include <loongson.h>
 
 void __init prom_init(void)
 {
diff --git a/arch/mips/lemote/lm2e/irq.c b/arch/mips/lemote/lm2e/irq.c
index 1d0a09f3b83..fb7643a2561 100644
--- a/arch/mips/lemote/lm2e/irq.c
+++ b/arch/mips/lemote/lm2e/irq.c
@@ -6,35 +6,14 @@
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
 #include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/i8259.h>
-#include <asm/mipsregs.h>
-#include <asm/mips-boards/bonito64.h>
-
 
+#include <loongson.h>
 /*
  * the first level int-handler will jump here if it is a bonito irq
  */
@@ -67,27 +46,24 @@ static void i8259_irqdispatch(void)
 	int irq;
 
 	irq = i8259_irq();
-	if (irq >= 0) {
+	if (irq >= 0)
 		do_IRQ(irq);
-	} else {
+	else
 		spurious_interrupt();
-	}
-
 }
 
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
 
-	if (pending & CAUSEF_IP7) {
+	if (pending & CAUSEF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-	} else if (pending & CAUSEF_IP5) {
+	else if (pending & CAUSEF_IP5)
 		i8259_irqdispatch();
-	} else if (pending & CAUSEF_IP2) {
+	else if (pending & CAUSEF_IP2)
 		bonito_irqdispatch();
-	} else {
+	else
 		spurious_interrupt();
-	}
 }
 
 static struct irqaction cascade_irqaction = {
@@ -97,8 +73,6 @@ static struct irqaction cascade_irqaction = {
 
 void __init arch_init_irq(void)
 {
-	extern void bonito_irq_init(void);
-
 	/*
 	 * Clear all of the interrupts while we change the able around a bit.
 	 * int-handler is not on bootstrap
@@ -128,16 +102,8 @@ void __init arch_init_irq(void)
 	init_i8259_irqs();
 	bonito_irq_init();
 
-	/*
-	printk("GPIODATA=%x, GPIOIE=%x\n", BONITO_GPIODATA, BONITO_GPIOIE);
-	printk("INTEN=%x, INTSET=%x, INTCLR=%x, INTISR=%x\n",
-			BONITO_INTEN, BONITO_INTENSET,
-			BONITO_INTENCLR, BONITO_INTISR);
-	*/
-
 	/* bonito irq at IP2 */
 	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
 	/* 8259 irq at IP5 */
 	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
-
 }
diff --git a/arch/mips/lemote/lm2e/mem.c b/arch/mips/lemote/lm2e/mem.c
index f24af70b669..6a7feb178fa 100644
--- a/arch/mips/lemote/lm2e/mem.c
+++ b/arch/mips/lemote/lm2e/mem.c
@@ -10,7 +10,7 @@
 
 #include <asm/bootinfo.h>
 
-extern unsigned long memsize, highmemsize;
+#include <loongson.h>
 
 void __init prom_init_memory(void)
 {
diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c
index 152efb65bba..bee846e6d8a 100644
--- a/arch/mips/lemote/lm2e/pci.c
+++ b/arch/mips/lemote/lm2e/pci.c
@@ -1,6 +1,4 @@
 /*
- * pci.c
- *
  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
@@ -8,31 +6,11 @@
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
-#include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/mips-boards/bonito64.h>
-#include <asm/mach-lemote/pci.h>
 
-extern struct pci_ops bonito64_pci_ops;
+#include <pci.h>
+#include <loongson.h>
 
 static struct resource loongson2e_pci_mem_resource = {
 	.name   = "LOONGSON2E PCI MEM",
diff --git a/arch/mips/lemote/lm2e/reset.c b/arch/mips/lemote/lm2e/reset.c
deleted file mode 100644
index 0faa140f403..00000000000
--- a/arch/mips/lemote/lm2e/reset.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Zhangjin Wu, wuzj@lemote.com
- */
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/io.h>
-
-#include <asm/reboot.h>
-#include <asm/mips-boards/bonito64.h>
-
-static void loongson2e_restart(char *command)
-{
-	/* do preparation for reboot */
-	BONITO_BONGENCFG &= ~(1 << 2);
-	BONITO_BONGENCFG |= (1 << 2);
-
-	/* reboot via jumping to boot base address */
-	((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
-}
-
-static void loongson2e_halt(void)
-{
-	while (1) ;
-}
-
-static int __init mips_reboot_setup(void)
-{
-	_machine_restart = loongson2e_restart;
-	_machine_halt = loongson2e_halt;
-	pm_power_off = loongson2e_halt;
-
-	return 0;
-}
-
-arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c
index 03578cf0ee7..66390215973 100644
--- a/arch/mips/lemote/lm2e/setup.c
+++ b/arch/mips/lemote/lm2e/setup.c
@@ -1,7 +1,4 @@
 /*
- * BRIEF MODULE DESCRIPTION
- * setup.c - board dependent boot routines
- *
  * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
  * Author: Fuxin Zhang, zhangfx@lemote.com
  *
@@ -9,28 +6,13 @@
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
-#include <linux/init.h>
 #include <linux/module.h>
 
 #include <asm/wbflush.h>
 
+#include <loongson.h>
+
 #ifdef CONFIG_VT
 #include <linux/console.h>
 #include <linux/screen_info.h>
diff --git a/arch/mips/lemote/lm2e/time.c b/arch/mips/lemote/lm2e/time.c
index b9d3f11b620..b13d1717465 100644
--- a/arch/mips/lemote/lm2e/time.c
+++ b/arch/mips/lemote/lm2e/time.c
@@ -10,13 +10,10 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  */
-
-#include <linux/init.h>
-
 #include <asm/mc146818-time.h>
 #include <asm/time.h>
 
-extern unsigned long cpu_clock_freq;
+#include <loongson.h>
 
 void __init plat_time_init(void)
 {
diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-lm2e.c
index e18ae4f574c..0c4c7a81213 100644
--- a/arch/mips/pci/fixup-lm2e.c
+++ b/arch/mips/pci/fixup-lm2e.c
@@ -1,6 +1,4 @@
 /*
- * fixup-lm2e.c
- *
  * Copyright (C) 2004 ICT CAS
  * Author: Li xiaoyu, ICT CAS
  *   lixy@ict.ac.cn
@@ -12,22 +10,6 @@
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
  */
 #include <linux/init.h>
 #include <linux/pci.h>
-- 
cgit v1.2.3


From f7face03c66cea12159191ba8d2a9ee735da0b0d Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Thu, 2 Jul 2009 23:23:30 +0800
Subject: MIPS: Loongson: PCI: Clean up pcimap setup

Fixup the wrong original comment of pcimap, and make the source code more
understandable. and also, some new extra consideration is added in.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-lemote/loongson.h | 17 ++++++++++++
 arch/mips/include/asm/mach-lemote/pci.h      |  4 +--
 arch/mips/lemote/lm2e/pci.c                  | 41 ++++++++++++++++++----------
 3 files changed, 45 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-lemote/loongson.h b/arch/mips/include/asm/mach-lemote/loongson.h
index 76cc2bddfa4..916eacec94e 100644
--- a/arch/mips/include/asm/mach-lemote/loongson.h
+++ b/arch/mips/include/asm/mach-lemote/loongson.h
@@ -33,4 +33,21 @@ extern void __init prom_init_memory(void);
 extern void __init prom_init_cmdline(void);
 extern void __init prom_init_env(void);
 
+/* PCI Configuration Registers */
+#define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
+
+/* PCI_Hit*_Sel_* */
+
+#define LOONGSON_PCI_HIT0_SEL_L     BONITO(BONITO_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H     BONITO(BONITO_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L     BONITO(BONITO_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H     BONITO(BONITO_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L     BONITO(BONITO_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H     BONITO(BONITO_REGBASE + 0x64)
+
+/* PXArb Config & Status */
+
+#define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
+
 #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-lemote/pci.h
index 92b2f59d890..3e6b1300afb 100644
--- a/arch/mips/include/asm/mach-lemote/pci.h
+++ b/arch/mips/include/asm/mach-lemote/pci.h
@@ -24,8 +24,8 @@
 
 extern struct pci_ops bonito64_pci_ops;
 
-#define LOONGSON2E_PCI_MEM_START	0x14000000UL
-#define LOONGSON2E_PCI_MEM_END		0x1fffffffUL
+#define LOONGSON2E_PCI_MEM_START	BONITO_PCILO1_BASE
+#define LOONGSON2E_PCI_MEM_END		(BONITO_PCILO1_BASE + 0x04000000 * 2)
 #define LOONGSON2E_PCI_IO_START		0x00004000UL
 
 #endif /* !__ASM_MACH_LEMOTE_PCI_H_ */
diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c
index bee846e6d8a..9812c30cc6e 100644
--- a/arch/mips/lemote/lm2e/pci.c
+++ b/arch/mips/lemote/lm2e/pci.c
@@ -34,33 +34,44 @@ static struct pci_controller  loongson2e_pci_controller = {
 	.io_offset      = 0x00000000UL,
 };
 
-static void __init ict_pcimap(void)
+static void __init setup_pcimap(void)
 {
 	/*
-	 * local to PCI mapping: [256M,512M] -> [256M,512M]; differ from PMON
-	 *
+	 * local to PCI mapping for CPU accessing PCI space
 	 * CPU address space [256M,448M] is window for accessing pci space
-	 * we set pcimap_lo[0,1,2] to map it to pci space [256M,448M]
-	 * pcimap: bit18,pcimap_2; bit[17-12],lo2;bit[11-6],lo1;bit[5-0],lo0
+	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+	 *
+	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
 	 */
-	/* 1,00 0110 ,0001 01,00 0000 */
-	BONITO_PCIMAP = 0x46140;
-
-	/* 1, 00 0010, 0000,01, 00 0000 */
-	/* BONITO_PCIMAP = 0x42040; */
+	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
+		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
+		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
+		BONITO_PCIMAP_WIN(0, 0);
 
 	/*
-	 * PCI to local mapping: [2G,2G+256M] -> [0,256M]
+	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
 	 */
-	BONITO_PCIBASE0 = 0x80000000;
-	BONITO_PCIBASE1 = 0x00800000;
-	BONITO_PCIBASE2 = 0x90000000;
+	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
+	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
+	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+	/* avoid deadlock of PCI reading/writing lock operation */
+	LOONGSON_PCI_ISR4C = 0xd2000001ul;
 
+	/* can not change gnt to break pci transfer when device's gnt not
+	deassert for some broken device */
+	LOONGSON_PXARB_CFG = 0x00fe0105ul;
 }
 
 static int __init pcibios_init(void)
 {
-	ict_pcimap();
+	setup_pcimap();
 
 	loongson2e_pci_controller.io_map_base = mips_io_port_base;
 
-- 
cgit v1.2.3


From 92d1b63dbae0865bee5317ca6b65e0b304dc590d Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:24:01 +0800
Subject: MIPS: Loongson: RTC: Enable legacy RTC driver on fulong

RTC_LIB is selected by MIPS by default, and therefore, the legacy RTC
driver is disabled. but fortunately, RTC_LIB not works on fulong, so,
enabling the legcy RTC driver is needed, otherwise, the tools like
hwclock will not work.

Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3ca0fe1a912..a383dac8101 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -6,7 +6,7 @@ config MIPS
 	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
-	select RTC_LIB
+	select RTC_LIB if !LEMOTE_FULONG
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
-- 
cgit v1.2.3


From 67b35e5d01aba7a83f2161b0c90acb08afa01e3e Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzj@lemote.com>
Date: Thu, 2 Jul 2009 23:25:46 +0800
Subject: MIPS: Loongson: Add oprofile support

This kernel support is needed by the user-space tool:oprofile to profile
linux kernel or applications via loongson2 performance counters. you can
enable this driver via CONFIG_OPROFILE = y or m.

On Loongson2 there are two performance counters, each one can count 16
events respectively. when anyone of the performance counter overflows, an
interrupt will be generated and is routed to the IRQ MIPS_CPU_IRQ_BASE + 6.

Signed-off-by: Yanhua <yanh@lemote.com>
Signed-off-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-lemote/loongson.h |   3 +
 arch/mips/lemote/lm2e/irq.c                  |   2 +
 arch/mips/oprofile/Makefile                  |   1 +
 arch/mips/oprofile/common.c                  |   4 +
 arch/mips/oprofile/op_model_loongson2.c      | 177 +++++++++++++++++++++++++++
 5 files changed, 187 insertions(+)
 create mode 100644 arch/mips/oprofile/op_model_loongson2.c

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-lemote/loongson.h b/arch/mips/include/asm/mach-lemote/loongson.h
index 916eacec94e..95ee4c8f2d5 100644
--- a/arch/mips/include/asm/mach-lemote/loongson.h
+++ b/arch/mips/include/asm/mach-lemote/loongson.h
@@ -50,4 +50,7 @@ extern void __init prom_init_env(void);
 #define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
 #define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
 
+/* loongson2-specific perf counter IRQ */
+#define LOONGSON2_PERFCNT_IRQ   (MIPS_CPU_IRQ_BASE + 6)
+
 #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/lemote/lm2e/irq.c b/arch/mips/lemote/lm2e/irq.c
index fb7643a2561..9585f5aa7cc 100644
--- a/arch/mips/lemote/lm2e/irq.c
+++ b/arch/mips/lemote/lm2e/irq.c
@@ -58,6 +58,8 @@ asmlinkage void plat_irq_dispatch(void)
 
 	if (pending & CAUSEF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
+		do_IRQ(LOONGSON2_PERFCNT_IRQ);
 	else if (pending & CAUSEF_IP5)
 		i8259_irqdispatch();
 	else if (pending & CAUSEF_IP2)
diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile
index bf3be6fcf7f..02cc65e52d1 100644
--- a/arch/mips/oprofile/Makefile
+++ b/arch/mips/oprofile/Makefile
@@ -15,3 +15,4 @@ oprofile-$(CONFIG_CPU_MIPS64)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_R10000)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_SB1)		+= op_model_mipsxx.o
 oprofile-$(CONFIG_CPU_RM9000)		+= op_model_rm9000.o
+oprofile-$(CONFIG_CPU_LOONGSON2)	+= op_model_loongson2.o
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 3bf3354547f..7832ad257a1 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -16,6 +16,7 @@
 
 extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
 extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
+extern struct op_mips_model op_model_loongson2_ops __attribute__((weak));
 
 static struct op_mips_model *model;
 
@@ -93,6 +94,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_RM9000:
 		lmodel = &op_model_rm9000_ops;
 		break;
+	case CPU_LOONGSON2:
+		lmodel = &op_model_loongson2_ops;
+		break;
 	};
 
 	if (!lmodel)
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
new file mode 100644
index 00000000000..655cb8dec34
--- /dev/null
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -0,0 +1,177 @@
+/*
+ * Loongson2 performance counter driver for oprofile
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Yanhua <yanh@lemote.com>
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+
+#include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
+#include "op_impl.h"
+
+/*
+ * a patch should be sent to oprofile with the loongson-specific support.
+ * otherwise, the oprofile tool will not recognize this and complain about
+ * "cpu_type 'unset' is not valid".
+ */
+#define LOONGSON2_CPU_TYPE	"mips/godson2"
+
+#define LOONGSON2_COUNTER1_EVENT(event)	((event & 0x0f) << 5)
+#define LOONGSON2_COUNTER2_EVENT(event)	((event & 0x0f) << 9)
+
+#define LOONGSON2_PERFCNT_EXL			(1UL	<<  0)
+#define LOONGSON2_PERFCNT_KERNEL		(1UL    <<  1)
+#define LOONGSON2_PERFCNT_SUPERVISOR	(1UL    <<  2)
+#define LOONGSON2_PERFCNT_USER			(1UL    <<  3)
+#define LOONGSON2_PERFCNT_INT_EN		(1UL    <<  4)
+#define LOONGSON2_PERFCNT_OVERFLOW		(1ULL   << 31)
+
+/* Loongson2 performance counter register */
+#define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
+#define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
+#define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
+#define write_c0_perfcnt(val) __write_64bit_c0_register($25, 0, val)
+
+static struct loongson2_register_config {
+	unsigned int ctrl;
+	unsigned long long reset_counter1;
+	unsigned long long reset_counter2;
+	int cnt1_enalbed, cnt2_enalbed;
+} reg;
+
+DEFINE_SPINLOCK(sample_lock);
+
+static char *oprofid = "LoongsonPerf";
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
+/* Compute all of the registers in preparation for enabling profiling.  */
+
+static void loongson2_reg_setup(struct op_counter_config *cfg)
+{
+	unsigned int ctrl = 0;
+
+	reg.reset_counter1 = 0;
+	reg.reset_counter2 = 0;
+	/* Compute the performance counter ctrl word.  */
+	/* For now count kernel and user mode */
+	if (cfg[0].enabled) {
+		ctrl |= LOONGSON2_COUNTER1_EVENT(cfg[0].event);
+		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
+	}
+
+	if (cfg[1].enabled) {
+		ctrl |= LOONGSON2_COUNTER2_EVENT(cfg[1].event);
+		reg.reset_counter2 = (0x80000000ULL - cfg[1].count);
+	}
+
+	if (cfg[0].enabled || cfg[1].enabled) {
+		ctrl |= LOONGSON2_PERFCNT_EXL | LOONGSON2_PERFCNT_INT_EN;
+		if (cfg[0].kernel || cfg[1].kernel)
+			ctrl |= LOONGSON2_PERFCNT_KERNEL;
+		if (cfg[0].user || cfg[1].user)
+			ctrl |= LOONGSON2_PERFCNT_USER;
+	}
+
+	reg.ctrl = ctrl;
+
+	reg.cnt1_enalbed = cfg[0].enabled;
+	reg.cnt2_enalbed = cfg[1].enabled;
+
+}
+
+/* Program all of the registers in preparation for enabling profiling.  */
+
+static void loongson2_cpu_setup(void *args)
+{
+	uint64_t perfcount;
+
+	perfcount = (reg.reset_counter2 << 32) | reg.reset_counter1;
+	write_c0_perfcnt(perfcount);
+}
+
+static void loongson2_cpu_start(void *args)
+{
+	/* Start all counters on current CPU */
+	if (reg.cnt1_enalbed || reg.cnt2_enalbed)
+		write_c0_perfctrl(reg.ctrl);
+}
+
+static void loongson2_cpu_stop(void *args)
+{
+	/* Stop all counters on current CPU */
+	write_c0_perfctrl(0);
+	memset(&reg, 0, sizeof(reg));
+}
+
+static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
+{
+	uint64_t counter, counter1, counter2;
+	struct pt_regs *regs = get_irq_regs();
+	int enabled;
+	unsigned long flags;
+
+	/*
+	 * LOONGSON2 defines two 32-bit performance counters.
+	 * To avoid a race updating the registers we need to stop the counters
+	 * while we're messing with
+	 * them ...
+	 */
+
+	/* Check whether the irq belongs to me */
+	enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
+	if (!enabled)
+		return IRQ_NONE;
+
+	counter = read_c0_perfcnt();
+	counter1 = counter & 0xffffffff;
+	counter2 = counter >> 32;
+
+	spin_lock_irqsave(&sample_lock, flags);
+
+	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
+		if (reg.cnt1_enalbed)
+			oprofile_add_sample(regs, 0);
+		counter1 = reg.reset_counter1;
+	}
+	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
+		if (reg.cnt2_enalbed)
+			oprofile_add_sample(regs, 1);
+		counter2 = reg.reset_counter2;
+	}
+
+	spin_unlock_irqrestore(&sample_lock, flags);
+
+	write_c0_perfcnt((counter2 << 32) | counter1);
+
+	return IRQ_HANDLED;
+}
+
+static int __init loongson2_init(void)
+{
+	return request_irq(LOONGSON2_PERFCNT_IRQ, loongson2_perfcount_handler,
+			   IRQF_SHARED, "Perfcounter", oprofid);
+}
+
+static void loongson2_exit(void)
+{
+	write_c0_perfctrl(0);
+	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
+}
+
+struct op_mips_model op_model_loongson2_ops = {
+	.reg_setup = loongson2_reg_setup,
+	.cpu_setup = loongson2_cpu_setup,
+	.init = loongson2_init,
+	.exit = loongson2_exit,
+	.cpu_start = loongson2_cpu_start,
+	.cpu_stop = loongson2_cpu_stop,
+	.cpu_type = LOONGSON2_CPU_TYPE,
+	.num_counters = 2
+};
-- 
cgit v1.2.3


From 8e4971175acc910eb4258df82a6bd8f2c4e4e5b5 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Thu, 2 Jul 2009 23:26:08 +0800
Subject: MIPS: Loongson: Change naming methods

To make source code of loongson sharable to the machines(such as gdium)
made by the other companies, we rename arch/mips/lemote to
arch/mips/loongson, asm/mach-lemote to asm/mach-loongson, and rename lm2e
to the name of the machine: fuloong-2e. accordingly, FULONG are renamed to
FULOONG2E to make it distinguishable to the future FULOONG2F.  and also,
some other relative tuning is needed.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                                  |   8 +-
 arch/mips/Makefile                                 |   8 +-
 .../asm/mach-lemote/cpu-feature-overrides.h        |  59 ------
 arch/mips/include/asm/mach-lemote/dma-coherence.h  |  68 -------
 arch/mips/include/asm/mach-lemote/loongson.h       |  56 ------
 arch/mips/include/asm/mach-lemote/mc146818rtc.h    |  36 ----
 arch/mips/include/asm/mach-lemote/pci.h            |  31 ---
 arch/mips/include/asm/mach-lemote/war.h            |  25 ---
 .../asm/mach-loongson/cpu-feature-overrides.h      |  59 ++++++
 .../mips/include/asm/mach-loongson/dma-coherence.h |  68 +++++++
 arch/mips/include/asm/mach-loongson/loongson.h     |  53 +++++
 arch/mips/include/asm/mach-loongson/mc146818rtc.h  |  36 ++++
 arch/mips/include/asm/mach-loongson/pci.h          |  31 +++
 arch/mips/include/asm/mach-loongson/war.h          |  25 +++
 arch/mips/include/asm/mips-boards/bonito64.h       |   2 +-
 arch/mips/lemote/lm2e/Makefile                     |  13 --
 arch/mips/lemote/lm2e/bonito-irq.c                 |  51 -----
 arch/mips/lemote/lm2e/cmdline.c                    |  52 -----
 arch/mips/lemote/lm2e/early_printk.c               |  39 ----
 arch/mips/lemote/lm2e/env.c                        |  58 ------
 arch/mips/lemote/lm2e/init.c                       |  30 ---
 arch/mips/lemote/lm2e/irq.c                        | 111 ----------
 arch/mips/lemote/lm2e/machtype.c                   |  15 --
 arch/mips/lemote/lm2e/mem.c                        |  36 ----
 arch/mips/lemote/lm2e/pci.c                        |  83 --------
 arch/mips/lemote/lm2e/setup.c                      |  58 ------
 arch/mips/lemote/lm2e/time.c                       |  27 ---
 arch/mips/loongson/fuloong-2e/Makefile             |  13 ++
 arch/mips/loongson/fuloong-2e/bonito-irq.c         |  51 +++++
 arch/mips/loongson/fuloong-2e/cmdline.c            |  52 +++++
 arch/mips/loongson/fuloong-2e/early_printk.c       |  39 ++++
 arch/mips/loongson/fuloong-2e/env.c                |  58 ++++++
 arch/mips/loongson/fuloong-2e/init.c               |  30 +++
 arch/mips/loongson/fuloong-2e/irq.c                | 111 ++++++++++
 arch/mips/loongson/fuloong-2e/machtype.c           |  15 ++
 arch/mips/loongson/fuloong-2e/mem.c                |  36 ++++
 arch/mips/loongson/fuloong-2e/pci.c                |  83 ++++++++
 arch/mips/loongson/fuloong-2e/reset.c              |  44 ++++
 arch/mips/loongson/fuloong-2e/time.c               |  27 +++
 arch/mips/pci/Makefile                             |   2 +-
 arch/mips/pci/fixup-fuloong2e.c                    | 224 +++++++++++++++++++++
 arch/mips/pci/fixup-lm2e.c                         | 224 ---------------------
 arch/mips/pci/ops-bonito64.c                       |   4 +-
 43 files changed, 1067 insertions(+), 1084 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
 delete mode 100644 arch/mips/include/asm/mach-lemote/dma-coherence.h
 delete mode 100644 arch/mips/include/asm/mach-lemote/loongson.h
 delete mode 100644 arch/mips/include/asm/mach-lemote/mc146818rtc.h
 delete mode 100644 arch/mips/include/asm/mach-lemote/pci.h
 delete mode 100644 arch/mips/include/asm/mach-lemote/war.h
 create mode 100644 arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-loongson/dma-coherence.h
 create mode 100644 arch/mips/include/asm/mach-loongson/loongson.h
 create mode 100644 arch/mips/include/asm/mach-loongson/mc146818rtc.h
 create mode 100644 arch/mips/include/asm/mach-loongson/pci.h
 create mode 100644 arch/mips/include/asm/mach-loongson/war.h
 delete mode 100644 arch/mips/lemote/lm2e/Makefile
 delete mode 100644 arch/mips/lemote/lm2e/bonito-irq.c
 delete mode 100644 arch/mips/lemote/lm2e/cmdline.c
 delete mode 100644 arch/mips/lemote/lm2e/early_printk.c
 delete mode 100644 arch/mips/lemote/lm2e/env.c
 delete mode 100644 arch/mips/lemote/lm2e/init.c
 delete mode 100644 arch/mips/lemote/lm2e/irq.c
 delete mode 100644 arch/mips/lemote/lm2e/machtype.c
 delete mode 100644 arch/mips/lemote/lm2e/mem.c
 delete mode 100644 arch/mips/lemote/lm2e/pci.c
 delete mode 100644 arch/mips/lemote/lm2e/setup.c
 delete mode 100644 arch/mips/lemote/lm2e/time.c
 create mode 100644 arch/mips/loongson/fuloong-2e/Makefile
 create mode 100644 arch/mips/loongson/fuloong-2e/bonito-irq.c
 create mode 100644 arch/mips/loongson/fuloong-2e/cmdline.c
 create mode 100644 arch/mips/loongson/fuloong-2e/early_printk.c
 create mode 100644 arch/mips/loongson/fuloong-2e/env.c
 create mode 100644 arch/mips/loongson/fuloong-2e/init.c
 create mode 100644 arch/mips/loongson/fuloong-2e/irq.c
 create mode 100644 arch/mips/loongson/fuloong-2e/machtype.c
 create mode 100644 arch/mips/loongson/fuloong-2e/mem.c
 create mode 100644 arch/mips/loongson/fuloong-2e/pci.c
 create mode 100644 arch/mips/loongson/fuloong-2e/reset.c
 create mode 100644 arch/mips/loongson/fuloong-2e/time.c
 create mode 100644 arch/mips/pci/fixup-fuloong2e.c
 delete mode 100644 arch/mips/pci/fixup-lm2e.c

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a383dac8101..3414e230182 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -6,7 +6,7 @@ config MIPS
 	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
-	select RTC_LIB if !LEMOTE_FULONG
+	select RTC_LIB if !LEMOTE_FULOONG2E
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
@@ -174,8 +174,8 @@ config LASAT
 	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config LEMOTE_FULONG
-	bool "Lemote Fulong mini-PC"
+config LEMOTE_FULOONG2E
+	bool "Lemote Fuloong2e mini-PC"
 	select ARCH_SPARSEMEM_ENABLE
 	select CEVT_R4K
 	select CSRC_R4K
@@ -196,7 +196,7 @@ config LEMOTE_FULONG
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
 	help
-	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
+	  Lemote Fuloong2e mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
 
 config MIPS_MALTA
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 861da514a46..7754cbbbf4e 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -314,11 +314,11 @@ cflags-$(CONFIG_WR_PPMC)		+= -I$(srctree)/arch/mips/include/asm/mach-wrppmc
 load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 
 #
-# lemote fulong mini-PC board
+# lemote fuloong2e mini-PC board
 #
-core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/
-load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
-cflags-$(CONFIG_LEMOTE_FULONG) += -I$(srctree)/arch/mips/include/asm/mach-lemote
+core-$(CONFIG_LEMOTE_FULOONG2E) +=arch/mips/loongson/fuloong-2e/
+load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
+cflags-$(CONFIG_LEMOTE_FULOONG2E) += -I$(srctree)/arch/mips/include/asm/mach-loongson/
 
 #
 # MIPS Malta board
diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
deleted file mode 100644
index 550a10dc9db..00000000000
--- a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
- * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
- * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
- *
- * reference: /proc/cpuinfo,
- * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
- * 	arch/mips/kernel/proc.c(show_cpuinfo),
- *      loongson2f user manual.
- */
-
-#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
-
-#define cpu_dcache_line_size()	32
-#define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	32
-
-
-#define cpu_has_32fpr		1
-#define cpu_has_3k_cache	0
-#define cpu_has_4k_cache	1
-#define cpu_has_4kex		1
-#define cpu_has_64bits		1
-#define cpu_has_cache_cdex_p	0
-#define cpu_has_cache_cdex_s	0
-#define cpu_has_counter		1
-#define cpu_has_dc_aliases	1
-#define cpu_has_divec		0
-#define cpu_has_dsp		0
-#define cpu_has_ejtag		0
-#define cpu_has_fpu		1
-#define cpu_has_ic_fills_f_dc	0
-#define cpu_has_inclusive_pcaches	1
-#define cpu_has_llsc 		1
-#define cpu_has_mcheck		0
-#define cpu_has_mdmx		0
-#define cpu_has_mips16		0
-#define cpu_has_mips32r1	0
-#define cpu_has_mips32r2	0
-#define cpu_has_mips3d		0
-#define cpu_has_mips64r1	0
-#define cpu_has_mips64r2	0
-#define cpu_has_mipsmt		0
-#define cpu_has_prefetch	0
-#define cpu_has_smartmips	0
-#define cpu_has_tlb		1
-#define cpu_has_tx39_cache	0
-#define cpu_has_userlocal	0
-#define cpu_has_vce		0
-#define cpu_has_vtag_icache	0
-#define cpu_has_watch		1
-#define cpu_icache_snoops_remote_store	1
-
-#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h
deleted file mode 100644
index c8de5e75077..00000000000
--- a/arch/mips/include/asm/mach-lemote/dma-coherence.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- */
-#ifndef __ASM_MACH_LEMOTE_DMA_COHERENCE_H
-#define __ASM_MACH_LEMOTE_DMA_COHERENCE_H
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_addr & 0x7fffffff;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_extra_sync_for_device(struct device *dev)
-{
-	return;
-}
-
-static inline int plat_dma_mapping_error(struct device *dev,
-					 dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_LEMOTE_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-lemote/loongson.h b/arch/mips/include/asm/mach-lemote/loongson.h
deleted file mode 100644
index 95ee4c8f2d5..00000000000
--- a/arch/mips/include/asm/mach-lemote/loongson.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Wu Zhangjin <wuzj@lemote.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __ASM_MACH_LOONGSON_LOONGSON_H
-#define __ASM_MACH_LOONGSON_LOONGSON_H
-
-#include <linux/io.h>
-#include <linux/init.h>
-
-/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */
-#include <asm/mips-boards/bonito64.h>
-
-/* loongson internal northbridge initialization */
-extern void bonito_irq_init(void);
-
-/* loongson-based machines specific reboot setup */
-extern void mips_reboot_setup(void);
-
-/* environment arguments from bootloader */
-extern unsigned long bus_clock, cpu_clock_freq;
-extern unsigned long memsize, highmemsize;
-
-/* loongson-specific command line, env and memory initialization */
-extern void __init prom_init_memory(void);
-extern void __init prom_init_cmdline(void);
-extern void __init prom_init_env(void);
-
-/* PCI Configuration Registers */
-#define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
-
-/* PCI_Hit*_Sel_* */
-
-#define LOONGSON_PCI_HIT0_SEL_L     BONITO(BONITO_REGBASE + 0x50)
-#define LOONGSON_PCI_HIT0_SEL_H     BONITO(BONITO_REGBASE + 0x54)
-#define LOONGSON_PCI_HIT1_SEL_L     BONITO(BONITO_REGBASE + 0x58)
-#define LOONGSON_PCI_HIT1_SEL_H     BONITO(BONITO_REGBASE + 0x5c)
-#define LOONGSON_PCI_HIT2_SEL_L     BONITO(BONITO_REGBASE + 0x60)
-#define LOONGSON_PCI_HIT2_SEL_H     BONITO(BONITO_REGBASE + 0x64)
-
-/* PXArb Config & Status */
-
-#define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
-#define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
-
-/* loongson2-specific perf counter IRQ */
-#define LOONGSON2_PERFCNT_IRQ   (MIPS_CPU_IRQ_BASE + 6)
-
-#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-lemote/mc146818rtc.h b/arch/mips/include/asm/mach-lemote/mc146818rtc.h
deleted file mode 100644
index ed5147e1108..00000000000
--- a/arch/mips/include/asm/mach-lemote/mc146818rtc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
- *
- * RTC routines for PC style attached Dallas chip.
- */
-#ifndef __ASM_MACH_LEMOTE_MC146818RTC_H
-#define __ASM_MACH_LEMOTE_MC146818RTC_H
-
-#include <linux/io.h>
-
-#define RTC_PORT(x)	(0x70 + (x))
-#define RTC_IRQ		8
-
-static inline unsigned char CMOS_READ(unsigned long addr)
-{
-	outb_p(addr, RTC_PORT(0));
-	return inb_p(RTC_PORT(1));
-}
-
-static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
-{
-	outb_p(addr, RTC_PORT(0));
-	outb_p(data, RTC_PORT(1));
-}
-
-#define RTC_ALWAYS_BCD	0
-
-#ifndef mc146818_decode_year
-#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
-#endif
-
-#endif /* __ASM_MACH_LEMOTE_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-lemote/pci.h b/arch/mips/include/asm/mach-lemote/pci.h
deleted file mode 100644
index 3e6b1300afb..00000000000
--- a/arch/mips/include/asm/mach-lemote/pci.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General
- * Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
- * 02139, USA.
- */
-
-#ifndef __ASM_MACH_LEMOTE_PCI_H_
-#define __ASM_MACH_LEMOTE_PCI_H_
-
-extern struct pci_ops bonito64_pci_ops;
-
-#define LOONGSON2E_PCI_MEM_START	BONITO_PCILO1_BASE
-#define LOONGSON2E_PCI_MEM_END		(BONITO_PCILO1_BASE + 0x04000000 * 2)
-#define LOONGSON2E_PCI_IO_START		0x00004000UL
-
-#endif /* !__ASM_MACH_LEMOTE_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-lemote/war.h b/arch/mips/include/asm/mach-lemote/war.h
deleted file mode 100644
index 05f89e0f2a1..00000000000
--- a/arch/mips/include/asm/mach-lemote/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_LEMOTE_WAR_H
-#define __ASM_MIPS_MACH_LEMOTE_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR	0
-#define R4600_V1_HIT_CACHEOP_WAR	0
-#define R4600_V2_HIT_CACHEOP_WAR	0
-#define R5432_CP0_INTERRUPT_WAR		0
-#define BCM1250_M3_WAR			0
-#define SIBYTE_1956_WAR			0
-#define MIPS4K_ICACHE_REFILL_WAR	0
-#define MIPS_CACHE_SYNC_WAR		0
-#define TX49XX_ICACHE_INDEX_INV_WAR	0
-#define RM9000_CDEX_SMP_WAR		0
-#define ICACHE_REFILLS_WORKAROUND_WAR	0
-#define R10000_LLSC_WAR			0
-#define MIPS34K_MISSED_ITLB_WAR		0
-
-#endif /* __ASM_MIPS_MACH_LEMOTE_WAR_H */
diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
new file mode 100644
index 00000000000..ce5b6e270e3
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * 	arch/mips/kernel/proc.c(show_cpuinfo),
+ *      loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	1
+#define cpu_has_divec		0
+#define cpu_has_dsp		0
+#define cpu_has_ejtag		0
+#define cpu_has_fpu		1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc 		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_mipsmt		0
+#define cpu_has_prefetch	0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_userlocal	0
+#define cpu_has_vce		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+#define cpu_icache_snoops_remote_store	1
+
+#endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-loongson/dma-coherence.h b/arch/mips/include/asm/mach-loongson/dma-coherence.h
new file mode 100644
index 00000000000..71a6851ba83
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/dma-coherence.h
@@ -0,0 +1,68 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ */
+#ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
+#define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
+
+struct device;
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+					  size_t size)
+{
+	return virt_to_phys(addr) | 0x80000000;
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+					       struct page *page)
+{
+	return page_to_phys(page) | 0x80000000;
+}
+
+static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
+	dma_addr_t dma_addr)
+{
+	return dma_addr & 0x7fffffff;
+}
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
+	size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 0;
+}
+
+#endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
new file mode 100644
index 00000000000..e9f74dee24e
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __ASM_MACH_LOONGSON_LOONGSON_H
+#define __ASM_MACH_LOONGSON_LOONGSON_H
+
+#include <linux/io.h>
+#include <linux/init.h>
+
+/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */
+#include <asm/mips-boards/bonito64.h>
+
+/* loongson internal northbridge initialization */
+extern void bonito_irq_init(void);
+
+/* environment arguments from bootloader */
+extern unsigned long bus_clock, cpu_clock_freq;
+extern unsigned long memsize, highmemsize;
+
+/* loongson-specific command line, env and memory initialization */
+extern void __init prom_init_memory(void);
+extern void __init prom_init_cmdline(void);
+extern void __init prom_init_env(void);
+
+/* PCI Configuration Registers */
+#define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
+
+/* PCI_Hit*_Sel_* */
+
+#define LOONGSON_PCI_HIT0_SEL_L     BONITO(BONITO_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H     BONITO(BONITO_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L     BONITO(BONITO_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H     BONITO(BONITO_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L     BONITO(BONITO_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H     BONITO(BONITO_REGBASE + 0x64)
+
+/* PXArb Config & Status */
+
+#define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
+
+/* loongson2-specific perf counter IRQ */
+#define LOONGSON2_PERFCNT_IRQ   (MIPS_CPU_IRQ_BASE + 6)
+
+#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
diff --git a/arch/mips/include/asm/mach-loongson/mc146818rtc.h b/arch/mips/include/asm/mach-loongson/mc146818rtc.h
new file mode 100644
index 00000000000..ed7fe978335
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/mc146818rtc.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * RTC routines for PC style attached Dallas chip.
+ */
+#ifndef __ASM_MACH_LOONGSON_MC146818RTC_H
+#define __ASM_MACH_LOONGSON_MC146818RTC_H
+
+#include <linux/io.h>
+
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_IRQ		8
+
+static inline unsigned char CMOS_READ(unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	return inb_p(RTC_PORT(1));
+}
+
+static inline void CMOS_WRITE(unsigned char data, unsigned long addr)
+{
+	outb_p(addr, RTC_PORT(0));
+	outb_p(data, RTC_PORT(1));
+}
+
+#define RTC_ALWAYS_BCD	0
+
+#ifndef mc146818_decode_year
+#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970)
+#endif
+
+#endif /* __ASM_MACH_LOONGSON_MC146818RTC_H */
diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h
new file mode 100644
index 00000000000..e229b2904cc
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/pci.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be
+ * useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ * 02139, USA.
+ */
+
+#ifndef __ASM_MACH_LOONGSON_PCI_H_
+#define __ASM_MACH_LOONGSON_PCI_H_
+
+extern struct pci_ops bonito64_pci_ops;
+
+#define LOONGSON2E_PCI_MEM_START	BONITO_PCILO1_BASE
+#define LOONGSON2E_PCI_MEM_END		(BONITO_PCILO1_BASE + 0x04000000 * 2)
+#define LOONGSON2E_PCI_IO_START		0x00004000UL
+
+#endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/war.h b/arch/mips/include/asm/mach-loongson/war.h
new file mode 100644
index 00000000000..4b971c3ffd8
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MACH_LOONGSON_WAR_H
+#define __ASM_MACH_LOONGSON_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MACH_LEMOTE_WAR_H */
diff --git a/arch/mips/include/asm/mips-boards/bonito64.h b/arch/mips/include/asm/mips-boards/bonito64.h
index a0f04bb99c9..a576ce044c3 100644
--- a/arch/mips/include/asm/mips-boards/bonito64.h
+++ b/arch/mips/include/asm/mips-boards/bonito64.h
@@ -26,7 +26,7 @@
 /* offsets from base register */
 #define BONITO(x)	(x)
 
-#elif defined(CONFIG_LEMOTE_FULONG)
+#elif defined(CONFIG_LEMOTE_FULOONG2E)
 
 #define BONITO(x) (*(volatile u32 *)((char *)CKSEG1ADDR(BONITO_REG_BASE) + (x)))
 #define BONITO_IRQ_BASE   32
diff --git a/arch/mips/lemote/lm2e/Makefile b/arch/mips/lemote/lm2e/Makefile
deleted file mode 100644
index a5bc1efc362..00000000000
--- a/arch/mips/lemote/lm2e/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile for Lemote Fulong mini-PC board.
-#
-
-obj-y += setup.o init.o reset.o irq.o pci.o bonito-irq.o mem.o \
-		env.o cmdline.o time.o machtype.o
-
-#
-# Early printk support
-#
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/lemote/lm2e/bonito-irq.c b/arch/mips/lemote/lm2e/bonito-irq.c
deleted file mode 100644
index 3e31e7ad713..00000000000
--- a/arch/mips/lemote/lm2e/bonito-irq.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/interrupt.h>
-
-#include <loongson.h>
-
-static inline void bonito_irq_enable(unsigned int irq)
-{
-	BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
-	mmiowb();
-}
-
-static inline void bonito_irq_disable(unsigned int irq)
-{
-	BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
-	mmiowb();
-}
-
-static struct irq_chip bonito_irq_type = {
-	.name	= "bonito_irq",
-	.ack	= bonito_irq_disable,
-	.mask	= bonito_irq_disable,
-	.mask_ack = bonito_irq_disable,
-	.unmask	= bonito_irq_enable,
-};
-
-static struct irqaction dma_timeout_irqaction = {
-	.handler	= no_action,
-	.name		= "dma_timeout",
-};
-
-void bonito_irq_init(void)
-{
-	u32 i;
-
-	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
-		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
-
-	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
-}
diff --git a/arch/mips/lemote/lm2e/cmdline.c b/arch/mips/lemote/lm2e/cmdline.c
deleted file mode 100644
index 75f1b243ee4..00000000000
--- a/arch/mips/lemote/lm2e/cmdline.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-int prom_argc;
-/* pmon passes arguments in 32bit pointers */
-int *_prom_argv;
-
-void __init prom_init_cmdline(void)
-{
-	int i;
-	long l;
-
-	/* firmware arguments are initialized in head.S */
-	prom_argc = fw_arg0;
-	_prom_argv = (int *)fw_arg1;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < prom_argc; i++) {
-		l = (long)_prom_argv[i];
-		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, ((char *)l));
-		strcat(arcs_cmdline, " ");
-	}
-
-	if ((strstr(arcs_cmdline, "console=")) == NULL)
-		strcat(arcs_cmdline, " console=ttyS0,115200");
-	if ((strstr(arcs_cmdline, "root=")) == NULL)
-		strcat(arcs_cmdline, " root=/dev/hda1");
-}
diff --git a/arch/mips/lemote/lm2e/early_printk.c b/arch/mips/lemote/lm2e/early_printk.c
deleted file mode 100644
index 3e0a6eaa404..00000000000
--- a/arch/mips/lemote/lm2e/early_printk.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*  early printk support
- *
- *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- *  Author: Wu Zhangjin, wuzj@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/serial_reg.h>
-
-#include <loongson.h>
-
-#define UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
-
-#define PORT(base, offset) (u8 *)(base + offset)
-
-static inline unsigned int serial_in(phys_addr_t base, int offset)
-{
-	return readb(PORT(base, offset));
-}
-
-static inline void serial_out(phys_addr_t base, int offset, int value)
-{
-	writeb(value, PORT(base, offset));
-}
-
-void prom_putchar(char c)
-{
-	phys_addr_t uart_base =
-		(phys_addr_t) ioremap_nocache(UART_BASE, 8);
-
-	while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(uart_base, UART_TX, c);
-}
diff --git a/arch/mips/lemote/lm2e/env.c b/arch/mips/lemote/lm2e/env.c
deleted file mode 100644
index b9ef5038554..00000000000
--- a/arch/mips/lemote/lm2e/env.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-unsigned long bus_clock, cpu_clock_freq;
-unsigned long memsize, highmemsize;
-
-/* pmon passes arguments in 32bit pointers */
-int *_prom_envp;
-
-#define parse_even_earlier(res, option, p)				\
-do {									\
-	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-			strict_strtol((char *)p + strlen(option"="),	\
-					10, &res);			\
-} while (0)
-
-void __init prom_init_env(void)
-{
-	long l;
-
-	/* firmware arguments are initialized in head.S */
-	_prom_envp = (int *)fw_arg2;
-
-	l = (long)*_prom_envp;
-	while (l != 0) {
-		parse_even_earlier(bus_clock, "busclock", l);
-		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
-		parse_even_earlier(memsize, "memsize", l);
-		parse_even_earlier(highmemsize, "highmemsize", l);
-		_prom_envp++;
-		l = (long)*_prom_envp;
-	}
-	if (memsize == 0)
-		memsize = 256;
-
-	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
-		bus_clock, cpu_clock_freq, memsize, highmemsize);
-}
diff --git a/arch/mips/lemote/lm2e/init.c b/arch/mips/lemote/lm2e/init.c
deleted file mode 100644
index 3abe927422a..00000000000
--- a/arch/mips/lemote/lm2e/init.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-void __init prom_init(void)
-{
-    /* init base address of io space */
-	set_io_port_base((unsigned long)
-		ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
-
-	prom_init_cmdline();
-	prom_init_env();
-	prom_init_memory();
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/lemote/lm2e/irq.c b/arch/mips/lemote/lm2e/irq.c
deleted file mode 100644
index 9585f5aa7cc..00000000000
--- a/arch/mips/lemote/lm2e/irq.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/i8259.h>
-
-#include <loongson.h>
-/*
- * the first level int-handler will jump here if it is a bonito irq
- */
-static void bonito_irqdispatch(void)
-{
-	u32 int_status;
-	int i;
-
-	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
-	int_status = BONITO_INTISR;
-	if (int_status & (1 << 10)) {
-		while (int_status & (1 << 10)) {
-			udelay(1);
-			int_status = BONITO_INTISR;
-		}
-	}
-
-	/* Get pending sources, masked by current enables */
-	int_status = BONITO_INTISR & BONITO_INTEN;
-
-	if (int_status != 0) {
-		i = __ffs(int_status);
-		int_status &= ~(1 << i);
-		do_IRQ(BONITO_IRQ_BASE + i);
-	}
-}
-
-static void i8259_irqdispatch(void)
-{
-	int irq;
-
-	irq = i8259_irq();
-	if (irq >= 0)
-		do_IRQ(irq);
-	else
-		spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
-	if (pending & CAUSEF_IP7)
-		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
-		do_IRQ(LOONGSON2_PERFCNT_IRQ);
-	else if (pending & CAUSEF_IP5)
-		i8259_irqdispatch();
-	else if (pending & CAUSEF_IP2)
-		bonito_irqdispatch();
-	else
-		spurious_interrupt();
-}
-
-static struct irqaction cascade_irqaction = {
-	.handler = no_action,
-	.name = "cascade",
-};
-
-void __init arch_init_irq(void)
-{
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 * int-handler is not on bootstrap
-	 */
-	clear_c0_status(ST0_IM | ST0_BEV);
-	local_irq_disable();
-
-	/* most bonito irq should be level triggered */
-	BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
-		BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
-	BONITO_INTSTEER = 0;
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	BONITO_INTENCLR = ~0;
-
-	/* init all controller
-	 *   0-15         ------> i8259 interrupt
-	 *   16-23        ------> mips cpu interrupt
-	 *   32-63        ------> bonito irq
-	 */
-
-	/* Sets the first-level interrupt dispatcher. */
-	mips_cpu_irq_init();
-	init_i8259_irqs();
-	bonito_irq_init();
-
-	/* bonito irq at IP2 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
-	/* 8259 irq at IP5 */
-	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
-}
diff --git a/arch/mips/lemote/lm2e/machtype.c b/arch/mips/lemote/lm2e/machtype.c
deleted file mode 100644
index 8d803eea787..00000000000
--- a/arch/mips/lemote/lm2e/machtype.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-const char *get_system_type(void)
-{
-	return "lemote-fulong";
-}
-
diff --git a/arch/mips/lemote/lm2e/mem.c b/arch/mips/lemote/lm2e/mem.c
deleted file mode 100644
index 6a7feb178fa..00000000000
--- a/arch/mips/lemote/lm2e/mem.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/fs.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-void __init prom_init_memory(void)
-{
-    add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-#ifdef CONFIG_64BIT
-    if (highmemsize > 0)
-		add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM);
-#endif /* CONFIG_64BIT */
-}
-
-/* override of arch/mips/mm/cache.c: __uncached_access */
-int __uncached_access(struct file *file, unsigned long addr)
-{
-	if (file->f_flags & O_SYNC)
-		return 1;
-
-	/*
-	 * On the Lemote Loongson 2e system, the peripheral registers
-	 * reside between 0x1000:0000 and 0x2000:0000.
-	 */
-	return addr >= __pa(high_memory) ||
-		((addr >= 0x10000000) && (addr < 0x20000000));
-}
diff --git a/arch/mips/lemote/lm2e/pci.c b/arch/mips/lemote/lm2e/pci.c
deleted file mode 100644
index 9812c30cc6e..00000000000
--- a/arch/mips/lemote/lm2e/pci.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/pci.h>
-
-#include <pci.h>
-#include <loongson.h>
-
-static struct resource loongson2e_pci_mem_resource = {
-	.name   = "LOONGSON2E PCI MEM",
-	.start  = LOONGSON2E_PCI_MEM_START,
-	.end    = LOONGSON2E_PCI_MEM_END,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct resource loongson2e_pci_io_resource = {
-	.name   = "LOONGSON2E PCI IO MEM",
-	.start  = LOONGSON2E_PCI_IO_START,
-	.end    = IO_SPACE_LIMIT,
-	.flags  = IORESOURCE_IO,
-};
-
-static struct pci_controller  loongson2e_pci_controller = {
-	.pci_ops        = &bonito64_pci_ops,
-	.io_resource    = &loongson2e_pci_io_resource,
-	.mem_resource   = &loongson2e_pci_mem_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_offset      = 0x00000000UL,
-};
-
-static void __init setup_pcimap(void)
-{
-	/*
-	 * local to PCI mapping for CPU accessing PCI space
-	 * CPU address space [256M,448M] is window for accessing pci space
-	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
-	 *
-	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
-	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
-	 */
-	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
-		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
-		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
-		BONITO_PCIMAP_WIN(0, 0);
-
-	/*
-	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
-	 */
-	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
-	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
-	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
-	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
-	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
-	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
-	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
-	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
-
-	/* avoid deadlock of PCI reading/writing lock operation */
-	LOONGSON_PCI_ISR4C = 0xd2000001ul;
-
-	/* can not change gnt to break pci transfer when device's gnt not
-	deassert for some broken device */
-	LOONGSON_PXARB_CFG = 0x00fe0105ul;
-}
-
-static int __init pcibios_init(void)
-{
-	setup_pcimap();
-
-	loongson2e_pci_controller.io_map_base = mips_io_port_base;
-
-	register_pci_controller(&loongson2e_pci_controller);
-
-	return 0;
-}
-
-arch_initcall(pcibios_init);
diff --git a/arch/mips/lemote/lm2e/setup.c b/arch/mips/lemote/lm2e/setup.c
deleted file mode 100644
index 66390215973..00000000000
--- a/arch/mips/lemote/lm2e/setup.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/module.h>
-
-#include <asm/wbflush.h>
-
-#include <loongson.h>
-
-#ifdef CONFIG_VT
-#include <linux/console.h>
-#include <linux/screen_info.h>
-#endif
-
-void (*__wbflush)(void);
-EXPORT_SYMBOL(__wbflush);
-
-static void wbflush_loongson2e(void)
-{
-	asm(".set\tpush\n\t"
-	    ".set\tnoreorder\n\t"
-	    ".set mips3\n\t"
-	    "sync\n\t"
-	    "nop\n\t"
-	    ".set\tpop\n\t"
-	    ".set mips0\n\t");
-}
-
-void __init plat_mem_setup(void)
-{
-	__wbflush = wbflush_loongson2e;
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-
-	screen_info = (struct screen_info) {
-		0, 25,		/* orig-x, orig-y */
-		    0,		/* unused */
-		    0,		/* orig-video-page */
-		    0,		/* orig-video-mode */
-		    80,		/* orig-video-cols */
-		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
-		    25,		/* orig-video-lines */
-		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
-		    16		/* orig-video-points */
-	};
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-}
diff --git a/arch/mips/lemote/lm2e/time.c b/arch/mips/lemote/lm2e/time.c
deleted file mode 100644
index b13d1717465..00000000000
--- a/arch/mips/lemote/lm2e/time.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <asm/mc146818-time.h>
-#include <asm/time.h>
-
-#include <loongson.h>
-
-void __init plat_time_init(void)
-{
-	/* setup mips r4k timer */
-	mips_hpt_frequency = cpu_clock_freq / 2;
-}
-
-unsigned long read_persistent_clock(void)
-{
-	return mc146818_get_cmos_time();
-}
diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile
new file mode 100644
index 00000000000..feb1d6bba49
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for Lemote Fuloong2e mini-PC board.
+#
+
+obj-y += setup.o init.o reset.o irq.o pci.o bonito-irq.o mem.o \
+		env.o cmdline.o time.o machtype.o
+
+#
+# Early printk support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/fuloong-2e/bonito-irq.c b/arch/mips/loongson/fuloong-2e/bonito-irq.c
new file mode 100644
index 00000000000..3e31e7ad713
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/bonito-irq.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+
+static inline void bonito_irq_enable(unsigned int irq)
+{
+	BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
+	mmiowb();
+}
+
+static inline void bonito_irq_disable(unsigned int irq)
+{
+	BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
+	mmiowb();
+}
+
+static struct irq_chip bonito_irq_type = {
+	.name	= "bonito_irq",
+	.ack	= bonito_irq_disable,
+	.mask	= bonito_irq_disable,
+	.mask_ack = bonito_irq_disable,
+	.unmask	= bonito_irq_enable,
+};
+
+static struct irqaction dma_timeout_irqaction = {
+	.handler	= no_action,
+	.name		= "dma_timeout",
+};
+
+void bonito_irq_init(void)
+{
+	u32 i;
+
+	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
+		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
+
+	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
+}
diff --git a/arch/mips/loongson/fuloong-2e/cmdline.c b/arch/mips/loongson/fuloong-2e/cmdline.c
new file mode 100644
index 00000000000..75f1b243ee4
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/cmdline.c
@@ -0,0 +1,52 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+int prom_argc;
+/* pmon passes arguments in 32bit pointers */
+int *_prom_argv;
+
+void __init prom_init_cmdline(void)
+{
+	int i;
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	prom_argc = fw_arg0;
+	_prom_argv = (int *)fw_arg1;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < prom_argc; i++) {
+		l = (long)_prom_argv[i];
+		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, ((char *)l));
+		strcat(arcs_cmdline, " ");
+	}
+
+	if ((strstr(arcs_cmdline, "console=")) == NULL)
+		strcat(arcs_cmdline, " console=ttyS0,115200");
+	if ((strstr(arcs_cmdline, "root=")) == NULL)
+		strcat(arcs_cmdline, " root=/dev/hda1");
+}
diff --git a/arch/mips/loongson/fuloong-2e/early_printk.c b/arch/mips/loongson/fuloong-2e/early_printk.c
new file mode 100644
index 00000000000..3e0a6eaa404
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/early_printk.c
@@ -0,0 +1,39 @@
+/*  early printk support
+ *
+ *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ *  Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/serial_reg.h>
+
+#include <loongson.h>
+
+#define UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
+
+#define PORT(base, offset) (u8 *)(base + offset)
+
+static inline unsigned int serial_in(phys_addr_t base, int offset)
+{
+	return readb(PORT(base, offset));
+}
+
+static inline void serial_out(phys_addr_t base, int offset, int value)
+{
+	writeb(value, PORT(base, offset));
+}
+
+void prom_putchar(char c)
+{
+	phys_addr_t uart_base =
+		(phys_addr_t) ioremap_nocache(UART_BASE, 8);
+
+	while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(uart_base, UART_TX, c);
+}
diff --git a/arch/mips/loongson/fuloong-2e/env.c b/arch/mips/loongson/fuloong-2e/env.c
new file mode 100644
index 00000000000..b9ef5038554
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/env.c
@@ -0,0 +1,58 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+unsigned long bus_clock, cpu_clock_freq;
+unsigned long memsize, highmemsize;
+
+/* pmon passes arguments in 32bit pointers */
+int *_prom_envp;
+
+#define parse_even_earlier(res, option, p)				\
+do {									\
+	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
+			strict_strtol((char *)p + strlen(option"="),	\
+					10, &res);			\
+} while (0)
+
+void __init prom_init_env(void)
+{
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	_prom_envp = (int *)fw_arg2;
+
+	l = (long)*_prom_envp;
+	while (l != 0) {
+		parse_even_earlier(bus_clock, "busclock", l);
+		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
+		parse_even_earlier(memsize, "memsize", l);
+		parse_even_earlier(highmemsize, "highmemsize", l);
+		_prom_envp++;
+		l = (long)*_prom_envp;
+	}
+	if (memsize == 0)
+		memsize = 256;
+
+	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
+		bus_clock, cpu_clock_freq, memsize, highmemsize);
+}
diff --git a/arch/mips/loongson/fuloong-2e/init.c b/arch/mips/loongson/fuloong-2e/init.c
new file mode 100644
index 00000000000..3abe927422a
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/init.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init prom_init(void)
+{
+    /* init base address of io space */
+	set_io_port_base((unsigned long)
+		ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
+
+	prom_init_cmdline();
+	prom_init_env();
+	prom_init_memory();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
new file mode 100644
index 00000000000..9585f5aa7cc
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+
+#include <loongson.h>
+/*
+ * the first level int-handler will jump here if it is a bonito irq
+ */
+static void bonito_irqdispatch(void)
+{
+	u32 int_status;
+	int i;
+
+	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
+	int_status = BONITO_INTISR;
+	if (int_status & (1 << 10)) {
+		while (int_status & (1 << 10)) {
+			udelay(1);
+			int_status = BONITO_INTISR;
+		}
+	}
+
+	/* Get pending sources, masked by current enables */
+	int_status = BONITO_INTISR & BONITO_INTEN;
+
+	if (int_status != 0) {
+		i = __ffs(int_status);
+		int_status &= ~(1 << i);
+		do_IRQ(BONITO_IRQ_BASE + i);
+	}
+}
+
+static void i8259_irqdispatch(void)
+{
+	int irq;
+
+	irq = i8259_irq();
+	if (irq >= 0)
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (pending & CAUSEF_IP7)
+		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
+		do_IRQ(LOONGSON2_PERFCNT_IRQ);
+	else if (pending & CAUSEF_IP5)
+		i8259_irqdispatch();
+	else if (pending & CAUSEF_IP2)
+		bonito_irqdispatch();
+	else
+		spurious_interrupt();
+}
+
+static struct irqaction cascade_irqaction = {
+	.handler = no_action,
+	.name = "cascade",
+};
+
+void __init arch_init_irq(void)
+{
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 * int-handler is not on bootstrap
+	 */
+	clear_c0_status(ST0_IM | ST0_BEV);
+	local_irq_disable();
+
+	/* most bonito irq should be level triggered */
+	BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
+		BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
+	BONITO_INTSTEER = 0;
+
+	/*
+	 * Mask out all interrupt by writing "1" to all bit position in
+	 * the interrupt reset reg.
+	 */
+	BONITO_INTENCLR = ~0;
+
+	/* init all controller
+	 *   0-15         ------> i8259 interrupt
+	 *   16-23        ------> mips cpu interrupt
+	 *   32-63        ------> bonito irq
+	 */
+
+	/* Sets the first-level interrupt dispatcher. */
+	mips_cpu_irq_init();
+	init_i8259_irqs();
+	bonito_irq_init();
+
+	/* bonito irq at IP2 */
+	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
+	/* 8259 irq at IP5 */
+	setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
+}
diff --git a/arch/mips/loongson/fuloong-2e/machtype.c b/arch/mips/loongson/fuloong-2e/machtype.c
new file mode 100644
index 00000000000..e03aa0de617
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/machtype.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+const char *get_system_type(void)
+{
+	return "lemote-fuloong-2e-box";
+}
+
diff --git a/arch/mips/loongson/fuloong-2e/mem.c b/arch/mips/loongson/fuloong-2e/mem.c
new file mode 100644
index 00000000000..6a7feb178fa
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/mem.c
@@ -0,0 +1,36 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init prom_init_memory(void)
+{
+    add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+#ifdef CONFIG_64BIT
+    if (highmemsize > 0)
+		add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM);
+#endif /* CONFIG_64BIT */
+}
+
+/* override of arch/mips/mm/cache.c: __uncached_access */
+int __uncached_access(struct file *file, unsigned long addr)
+{
+	if (file->f_flags & O_SYNC)
+		return 1;
+
+	/*
+	 * On the Lemote Loongson 2e system, the peripheral registers
+	 * reside between 0x1000:0000 and 0x2000:0000.
+	 */
+	return addr >= __pa(high_memory) ||
+		((addr >= 0x10000000) && (addr < 0x20000000));
+}
diff --git a/arch/mips/loongson/fuloong-2e/pci.c b/arch/mips/loongson/fuloong-2e/pci.c
new file mode 100644
index 00000000000..9812c30cc6e
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/pci.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/pci.h>
+
+#include <pci.h>
+#include <loongson.h>
+
+static struct resource loongson2e_pci_mem_resource = {
+	.name   = "LOONGSON2E PCI MEM",
+	.start  = LOONGSON2E_PCI_MEM_START,
+	.end    = LOONGSON2E_PCI_MEM_END,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct resource loongson2e_pci_io_resource = {
+	.name   = "LOONGSON2E PCI IO MEM",
+	.start  = LOONGSON2E_PCI_IO_START,
+	.end    = IO_SPACE_LIMIT,
+	.flags  = IORESOURCE_IO,
+};
+
+static struct pci_controller  loongson2e_pci_controller = {
+	.pci_ops        = &bonito64_pci_ops,
+	.io_resource    = &loongson2e_pci_io_resource,
+	.mem_resource   = &loongson2e_pci_mem_resource,
+	.mem_offset     = 0x00000000UL,
+	.io_offset      = 0x00000000UL,
+};
+
+static void __init setup_pcimap(void)
+{
+	/*
+	 * local to PCI mapping for CPU accessing PCI space
+	 * CPU address space [256M,448M] is window for accessing pci space
+	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+	 *
+	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
+	 */
+	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
+		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
+		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
+		BONITO_PCIMAP_WIN(0, 0);
+
+	/*
+	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
+	 */
+	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
+	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
+	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+	/* avoid deadlock of PCI reading/writing lock operation */
+	LOONGSON_PCI_ISR4C = 0xd2000001ul;
+
+	/* can not change gnt to break pci transfer when device's gnt not
+	deassert for some broken device */
+	LOONGSON_PXARB_CFG = 0x00fe0105ul;
+}
+
+static int __init pcibios_init(void)
+{
+	setup_pcimap();
+
+	loongson2e_pci_controller.io_map_base = mips_io_port_base;
+
+	register_pci_controller(&loongson2e_pci_controller);
+
+	return 0;
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c
new file mode 100644
index 00000000000..c21299af7f6
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/reset.c
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Zhangjin Wu, wuzj@lemote.com
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+
+#include <loongson.h>
+
+static void loongson2e_restart(char *command)
+{
+	/* do preparation for reboot */
+	BONITO_BONGENCFG &= ~(1 << 2);
+	BONITO_BONGENCFG |= (1 << 2);
+
+	/* reboot via jumping to boot base address */
+	((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
+}
+
+static void loongson2e_halt(void)
+{
+	while (1)
+		;
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = loongson2e_restart;
+	_machine_halt = loongson2e_halt;
+	pm_power_off = loongson2e_halt;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/loongson/fuloong-2e/time.c b/arch/mips/loongson/fuloong-2e/time.c
new file mode 100644
index 00000000000..b13d1717465
--- /dev/null
+++ b/arch/mips/loongson/fuloong-2e/time.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+
+#include <loongson.h>
+
+void __init plat_time_init(void)
+{
+	/* setup mips r4k timer */
+	mips_hpt_frequency = cpu_clock_freq / 2;
+}
+
+unsigned long read_persistent_clock(void)
+{
+	return mc146818_get_cmos_time();
+}
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 63d8a297c58..0d4d5ea6fac 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_PNX8550)	+= fixup-pnx8550.o ops-pnx8550.o
-obj-$(CONFIG_LEMOTE_FULONG)	+= fixup-lm2e.o ops-bonito64.o
+obj-$(CONFIG_LEMOTE_FULOONG2E)	+= fixup-fuloong2e.o ops-bonito64.o
 obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o
diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c
new file mode 100644
index 00000000000..0c4c7a81213
--- /dev/null
+++ b/arch/mips/pci/fixup-fuloong2e.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2004 ICT CAS
+ * Author: Li xiaoyu, ICT CAS
+ *   lixy@ict.ac.cn
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/mips-boards/bonito64.h>
+
+/* South bridge slot number is set by the pci probe process */
+static u8 sb_slot = 5;
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = 0;
+
+	if (slot == sb_slot) {
+		switch (PCI_FUNC(dev->devfn)) {
+		case 2:
+			irq = 10;
+			break;
+		case 3:
+			irq = 11;
+			break;
+		case 5:
+			irq = 9;
+			break;
+		}
+	} else {
+		irq = BONITO_IRQ_BASE + 25 + pin;
+	}
+	return irq;
+
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	/* Configues port 1, 2, 3, 4 to be validate*/
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
+
+	/* System clock is 48-MHz Oscillator. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+
+static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
+{
+	unsigned char c;
+
+	sb_slot = PCI_SLOT(pdev->devfn);
+
+	printk(KERN_INFO "via686b fix: ISA bridge\n");
+
+	/*  Enable I/O Recovery time */
+	pci_write_config_byte(pdev, 0x40, 0x08);
+
+	/*  Enable ISA refresh */
+	pci_write_config_byte(pdev, 0x41, 0x01);
+
+	/*  disable ISA line buffer */
+	pci_write_config_byte(pdev, 0x45, 0x00);
+
+	/*  Gate INTR, and flush line buffer */
+	pci_write_config_byte(pdev, 0x46, 0xe0);
+
+	/*  Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
+	/* pci_write_config_byte(pdev, 0x47, 0x20); */
+
+	/*
+	 *  enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
+	 *  enable time-out timer
+	 */
+	pci_write_config_byte(pdev, 0x47, 0xe6);
+
+	/*
+	 * enable level trigger on pci irqs: 9,10,11,13
+	 * important! without this PCI interrupts won't work
+	 */
+	outb(0x2e, 0x4d1);
+
+	/*  512 K PCI Decode */
+	pci_write_config_byte(pdev, 0x48, 0x01);
+
+	/*  Wait for PGNT before grant to ISA Master/DMA */
+	pci_write_config_byte(pdev, 0x4a, 0x84);
+
+	/*
+	 * Plug'n'Play
+	 *
+	 *  Parallel DRQ 3, Floppy DRQ 2 (default)
+	 */
+	pci_write_config_byte(pdev, 0x50, 0x0e);
+
+	/*
+	 * IRQ Routing for Floppy and Parallel port
+	 *
+	 *  IRQ 6 for floppy, IRQ 7 for parallel port
+	 */
+	pci_write_config_byte(pdev, 0x51, 0x76);
+
+	/* IRQ Routing for serial ports (take IRQ 3 and 4) */
+	pci_write_config_byte(pdev, 0x52, 0x34);
+
+	/*  All IRQ's level triggered. */
+	pci_write_config_byte(pdev, 0x54, 0x00);
+
+	/* route PIRQA-D irq */
+	pci_write_config_byte(pdev, 0x55, 0x90);	/* bit 7-4, PIRQA */
+	pci_write_config_byte(pdev, 0x56, 0xba);	/* bit 7-4, PIRQC; */
+							/* 3-0, PIRQB */
+	pci_write_config_byte(pdev, 0x57, 0xd0);	/* bit 7-4, PIRQD */
+
+	/* enable function 5/6, audio/modem */
+	pci_read_config_byte(pdev, 0x85, &c);
+	c &= ~(0x3 << 2);
+	pci_write_config_byte(pdev, 0x85, c);
+
+	printk(KERN_INFO"via686b fix: ISA bridge done\n");
+}
+
+static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
+{
+	printk(KERN_INFO"via686b fix: IDE\n");
+
+	/* Modify IDE controller setup */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
+	pci_write_config_byte(pdev, PCI_COMMAND,
+			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+			      PCI_COMMAND_MASTER);
+	pci_write_config_byte(pdev, 0x40, 0x0b);
+	/* legacy mode */
+	pci_write_config_byte(pdev, 0x42, 0x09);
+
+#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
+	/* disable read prefetch/write post buffers */
+	pci_write_config_byte(pdev, 0x41, 0x02);
+
+	/* use 3/4 as fifo thresh hold  */
+	pci_write_config_byte(pdev, 0x43, 0x0a);
+	pci_write_config_byte(pdev, 0x44, 0x00);
+
+	pci_write_config_byte(pdev, 0x45, 0x00);
+#else
+	pci_write_config_byte(pdev, 0x41, 0xc2);
+	pci_write_config_byte(pdev, 0x43, 0x35);
+	pci_write_config_byte(pdev, 0x44, 0x1c);
+
+	pci_write_config_byte(pdev, 0x45, 0x10);
+#endif
+
+	printk(KERN_INFO"via686b fix: IDE done\n");
+}
+
+static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
+{
+	/* irq routing */
+	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
+}
+
+static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
+{
+	/* irq routing */
+	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
+}
+
+static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+	unsigned char c;
+
+	/* enable IO */
+	pci_write_config_byte(pdev, PCI_COMMAND,
+			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+			      PCI_COMMAND_MASTER);
+	pci_read_config_dword(pdev, 0x4, &val);
+	pci_write_config_dword(pdev, 0x4, val | 1);
+
+	/* route ac97 IRQ */
+	pci_write_config_byte(pdev, 0x3c, 9);
+
+	pci_read_config_byte(pdev, 0x8, &c);
+
+	/* link control: enable link & SGD PCM output */
+	pci_write_config_byte(pdev, 0x41, 0xcc);
+
+	/* disable game port, FM, midi, sb, enable write to reg2c-2f */
+	pci_write_config_byte(pdev, 0x42, 0x20);
+
+	/* we are using Avance logic codec */
+	pci_write_config_word(pdev, 0x2c, 0x1005);
+	pci_write_config_word(pdev, 0x2e, 0x4710);
+	pci_read_config_dword(pdev, 0x2c, &val);
+
+	pci_write_config_byte(pdev, 0x42, 0x0);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
+			 loongson2e_686b_func0_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
+			 loongson2e_686b_func1_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
+			 loongson2e_686b_func2_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
+			 loongson2e_686b_func3_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
+			 loongson2e_686b_func5_fixup);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+			 loongson2e_nec_fixup);
diff --git a/arch/mips/pci/fixup-lm2e.c b/arch/mips/pci/fixup-lm2e.c
deleted file mode 100644
index 0c4c7a81213..00000000000
--- a/arch/mips/pci/fixup-lm2e.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Copyright (C) 2004 ICT CAS
- * Author: Li xiaoyu, ICT CAS
- *   lixy@ict.ac.cn
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/mips-boards/bonito64.h>
-
-/* South bridge slot number is set by the pci probe process */
-static u8 sb_slot = 5;
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = 0;
-
-	if (slot == sb_slot) {
-		switch (PCI_FUNC(dev->devfn)) {
-		case 2:
-			irq = 10;
-			break;
-		case 3:
-			irq = 11;
-			break;
-		case 5:
-			irq = 9;
-			break;
-		}
-	} else {
-		irq = BONITO_IRQ_BASE + 25 + pin;
-	}
-	return irq;
-
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
-{
-	unsigned int val;
-
-	/* Configues port 1, 2, 3, 4 to be validate*/
-	pci_read_config_dword(pdev, 0xe0, &val);
-	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
-
-	/* System clock is 48-MHz Oscillator. */
-	pci_write_config_dword(pdev, 0xe4, 1 << 5);
-}
-
-static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
-{
-	unsigned char c;
-
-	sb_slot = PCI_SLOT(pdev->devfn);
-
-	printk(KERN_INFO "via686b fix: ISA bridge\n");
-
-	/*  Enable I/O Recovery time */
-	pci_write_config_byte(pdev, 0x40, 0x08);
-
-	/*  Enable ISA refresh */
-	pci_write_config_byte(pdev, 0x41, 0x01);
-
-	/*  disable ISA line buffer */
-	pci_write_config_byte(pdev, 0x45, 0x00);
-
-	/*  Gate INTR, and flush line buffer */
-	pci_write_config_byte(pdev, 0x46, 0xe0);
-
-	/*  Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
-	/* pci_write_config_byte(pdev, 0x47, 0x20); */
-
-	/*
-	 *  enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
-	 *  enable time-out timer
-	 */
-	pci_write_config_byte(pdev, 0x47, 0xe6);
-
-	/*
-	 * enable level trigger on pci irqs: 9,10,11,13
-	 * important! without this PCI interrupts won't work
-	 */
-	outb(0x2e, 0x4d1);
-
-	/*  512 K PCI Decode */
-	pci_write_config_byte(pdev, 0x48, 0x01);
-
-	/*  Wait for PGNT before grant to ISA Master/DMA */
-	pci_write_config_byte(pdev, 0x4a, 0x84);
-
-	/*
-	 * Plug'n'Play
-	 *
-	 *  Parallel DRQ 3, Floppy DRQ 2 (default)
-	 */
-	pci_write_config_byte(pdev, 0x50, 0x0e);
-
-	/*
-	 * IRQ Routing for Floppy and Parallel port
-	 *
-	 *  IRQ 6 for floppy, IRQ 7 for parallel port
-	 */
-	pci_write_config_byte(pdev, 0x51, 0x76);
-
-	/* IRQ Routing for serial ports (take IRQ 3 and 4) */
-	pci_write_config_byte(pdev, 0x52, 0x34);
-
-	/*  All IRQ's level triggered. */
-	pci_write_config_byte(pdev, 0x54, 0x00);
-
-	/* route PIRQA-D irq */
-	pci_write_config_byte(pdev, 0x55, 0x90);	/* bit 7-4, PIRQA */
-	pci_write_config_byte(pdev, 0x56, 0xba);	/* bit 7-4, PIRQC; */
-							/* 3-0, PIRQB */
-	pci_write_config_byte(pdev, 0x57, 0xd0);	/* bit 7-4, PIRQD */
-
-	/* enable function 5/6, audio/modem */
-	pci_read_config_byte(pdev, 0x85, &c);
-	c &= ~(0x3 << 2);
-	pci_write_config_byte(pdev, 0x85, c);
-
-	printk(KERN_INFO"via686b fix: ISA bridge done\n");
-}
-
-static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
-{
-	printk(KERN_INFO"via686b fix: IDE\n");
-
-	/* Modify IDE controller setup */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
-	pci_write_config_byte(pdev, PCI_COMMAND,
-			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			      PCI_COMMAND_MASTER);
-	pci_write_config_byte(pdev, 0x40, 0x0b);
-	/* legacy mode */
-	pci_write_config_byte(pdev, 0x42, 0x09);
-
-#if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
-	/* disable read prefetch/write post buffers */
-	pci_write_config_byte(pdev, 0x41, 0x02);
-
-	/* use 3/4 as fifo thresh hold  */
-	pci_write_config_byte(pdev, 0x43, 0x0a);
-	pci_write_config_byte(pdev, 0x44, 0x00);
-
-	pci_write_config_byte(pdev, 0x45, 0x00);
-#else
-	pci_write_config_byte(pdev, 0x41, 0xc2);
-	pci_write_config_byte(pdev, 0x43, 0x35);
-	pci_write_config_byte(pdev, 0x44, 0x1c);
-
-	pci_write_config_byte(pdev, 0x45, 0x10);
-#endif
-
-	printk(KERN_INFO"via686b fix: IDE done\n");
-}
-
-static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
-{
-	/* irq routing */
-	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
-}
-
-static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
-{
-	/* irq routing */
-	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
-}
-
-static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
-{
-	unsigned int val;
-	unsigned char c;
-
-	/* enable IO */
-	pci_write_config_byte(pdev, PCI_COMMAND,
-			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-			      PCI_COMMAND_MASTER);
-	pci_read_config_dword(pdev, 0x4, &val);
-	pci_write_config_dword(pdev, 0x4, val | 1);
-
-	/* route ac97 IRQ */
-	pci_write_config_byte(pdev, 0x3c, 9);
-
-	pci_read_config_byte(pdev, 0x8, &c);
-
-	/* link control: enable link & SGD PCM output */
-	pci_write_config_byte(pdev, 0x41, 0xcc);
-
-	/* disable game port, FM, midi, sb, enable write to reg2c-2f */
-	pci_write_config_byte(pdev, 0x42, 0x20);
-
-	/* we are using Avance logic codec */
-	pci_write_config_word(pdev, 0x2c, 0x1005);
-	pci_write_config_word(pdev, 0x2e, 0x4710);
-	pci_read_config_dword(pdev, 0x2c, &val);
-
-	pci_write_config_byte(pdev, 0x42, 0x0);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
-			 loongson2e_686b_func0_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
-			 loongson2e_686b_func1_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
-			 loongson2e_686b_func2_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
-			 loongson2e_686b_func3_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
-			 loongson2e_686b_func5_fixup);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
-			 loongson2e_nec_fixup);
diff --git a/arch/mips/pci/ops-bonito64.c b/arch/mips/pci/ops-bonito64.c
index f742c51acf0..54e55e7a243 100644
--- a/arch/mips/pci/ops-bonito64.c
+++ b/arch/mips/pci/ops-bonito64.c
@@ -29,7 +29,7 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
-#ifdef CONFIG_LEMOTE_FULONG
+#ifdef CONFIG_LEMOTE_FULOONG2E
 #define CFG_SPACE_REG(offset) (void *)CKSEG1ADDR(BONITO_PCICFG_BASE | (offset))
 #define ID_SEL_BEGIN 11
 #else
@@ -77,7 +77,7 @@ static int bonito64_pcibios_config_access(unsigned char access_type,
 	addrp = CFG_SPACE_REG(addr & 0xffff);
 	if (access_type == PCI_ACCESS_WRITE) {
 		writel(cpu_to_le32(*data), addrp);
-#ifndef CONFIG_LEMOTE_FULONG
+#ifndef CONFIG_LEMOTE_FULOONG2E
 		/* Wait till done */
 		while (BONITO_PCIMSTAT & 0xF);
 #endif
-- 
cgit v1.2.3


From 85749d24bcf90440b10394312e5b1c96d1a62cdb Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Thu, 2 Jul 2009 23:26:45 +0800
Subject: MIPS: Loongson: Split common loongson source code out

To share common loongson source code between all of the loongson-based
machines. there is a need to split it out of the fuloong-2e/ directory.
at the same time, other according tuning is needed. the machine-specific
parts are defined as macros in relative header file, pci.h, mem.h,
machine.h.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                              | 32 +++-------
 arch/mips/Makefile                             |  7 ++-
 arch/mips/include/asm/mach-loongson/loongson.h | 11 ++++
 arch/mips/include/asm/mach-loongson/machine.h  | 22 +++++++
 arch/mips/include/asm/mach-loongson/mem.h      | 30 ++++++++++
 arch/mips/include/asm/mach-loongson/pci.h      | 12 +++-
 arch/mips/loongson/Kconfig                     | 31 ++++++++++
 arch/mips/loongson/Makefile                    | 11 ++++
 arch/mips/loongson/common/Makefile             | 11 ++++
 arch/mips/loongson/common/bonito-irq.c         | 51 ++++++++++++++++
 arch/mips/loongson/common/cmdline.c            | 52 ++++++++++++++++
 arch/mips/loongson/common/early_printk.c       | 38 ++++++++++++
 arch/mips/loongson/common/env.c                | 58 ++++++++++++++++++
 arch/mips/loongson/common/init.c               | 30 ++++++++++
 arch/mips/loongson/common/irq.c                | 74 +++++++++++++++++++++++
 arch/mips/loongson/common/machtype.c           | 17 ++++++
 arch/mips/loongson/common/mem.c                | 35 +++++++++++
 arch/mips/loongson/common/pci.c                | 83 ++++++++++++++++++++++++++
 arch/mips/loongson/common/reset.c              | 44 ++++++++++++++
 arch/mips/loongson/common/setup.c              | 58 ++++++++++++++++++
 arch/mips/loongson/common/time.c               | 27 +++++++++
 arch/mips/loongson/fuloong-2e/Makefile         |  8 +--
 arch/mips/loongson/fuloong-2e/bonito-irq.c     | 51 ----------------
 arch/mips/loongson/fuloong-2e/cmdline.c        | 52 ----------------
 arch/mips/loongson/fuloong-2e/early_printk.c   | 39 ------------
 arch/mips/loongson/fuloong-2e/env.c            | 58 ------------------
 arch/mips/loongson/fuloong-2e/init.c           | 30 ----------
 arch/mips/loongson/fuloong-2e/irq.c            | 52 ++--------------
 arch/mips/loongson/fuloong-2e/machtype.c       | 15 -----
 arch/mips/loongson/fuloong-2e/mem.c            | 36 -----------
 arch/mips/loongson/fuloong-2e/pci.c            | 83 --------------------------
 arch/mips/loongson/fuloong-2e/reset.c          | 37 +++---------
 arch/mips/loongson/fuloong-2e/time.c           | 27 ---------
 33 files changed, 720 insertions(+), 502 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-loongson/machine.h
 create mode 100644 arch/mips/include/asm/mach-loongson/mem.h
 create mode 100644 arch/mips/loongson/Kconfig
 create mode 100644 arch/mips/loongson/Makefile
 create mode 100644 arch/mips/loongson/common/Makefile
 create mode 100644 arch/mips/loongson/common/bonito-irq.c
 create mode 100644 arch/mips/loongson/common/cmdline.c
 create mode 100644 arch/mips/loongson/common/early_printk.c
 create mode 100644 arch/mips/loongson/common/env.c
 create mode 100644 arch/mips/loongson/common/init.c
 create mode 100644 arch/mips/loongson/common/irq.c
 create mode 100644 arch/mips/loongson/common/machtype.c
 create mode 100644 arch/mips/loongson/common/mem.c
 create mode 100644 arch/mips/loongson/common/pci.c
 create mode 100644 arch/mips/loongson/common/reset.c
 create mode 100644 arch/mips/loongson/common/setup.c
 create mode 100644 arch/mips/loongson/common/time.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/bonito-irq.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/cmdline.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/early_printk.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/env.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/init.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/machtype.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/mem.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/pci.c
 delete mode 100644 arch/mips/loongson/fuloong-2e/time.c

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3414e230182..482dcc3b91e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -174,30 +174,15 @@ config LASAT
 	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config LEMOTE_FULOONG2E
-	bool "Lemote Fuloong2e mini-PC"
-	select ARCH_SPARSEMEM_ENABLE
-	select CEVT_R4K
-	select CSRC_R4K
-	select SYS_HAS_CPU_LOONGSON2
-	select DMA_NONCOHERENT
-	select BOOT_ELF32
-	select BOARD_SCACHE
-	select HAVE_STD_PC_SERIAL_PORT
-	select HW_HAS_PCI
-	select I8259
-	select ISA
-	select IRQ_CPU
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select SYS_HAS_EARLY_PRINTK
-	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select CPU_HAS_WB
+config MACH_LOONGSON
+	bool "Loongson family of machines"
 	help
-	  Lemote Fuloong2e mini-PC board based on the Chinese Loongson-2E CPU and
-	  an FPGA northbridge
+	  This enables the support of Loongson family of machines.
+
+	  Loongson is a family of general-purpose MIPS-compatible CPUs.
+	  developed at Institute of Computing Technology (ICT),
+	  Chinese Academy of Sciences (CAS) in the People's Republic
+	  of China. The chief architect is Professor Weiwu Hu.
 
 config MIPS_MALTA
 	bool "MIPS Malta board"
@@ -668,6 +653,7 @@ source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/cavium-octeon/Kconfig"
+source "arch/mips/loongson/Kconfig"
 
 endmenu
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 7754cbbbf4e..94d6f581386 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -314,11 +314,12 @@ cflags-$(CONFIG_WR_PPMC)		+= -I$(srctree)/arch/mips/include/asm/mach-wrppmc
 load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 
 #
-# lemote fuloong2e mini-PC board
+# Loongson family
 #
-core-$(CONFIG_LEMOTE_FULOONG2E) +=arch/mips/loongson/fuloong-2e/
+core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
+cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
+                    -mno-branch-likely
 load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
-cflags-$(CONFIG_LEMOTE_FULOONG2E) += -I$(srctree)/arch/mips/include/asm/mach-loongson/
 
 #
 # MIPS Malta board
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index e9f74dee24e..da70bcf2304 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -21,6 +21,10 @@
 /* loongson internal northbridge initialization */
 extern void bonito_irq_init(void);
 
+/* machine-specific reboot/halt operation */
+extern void mach_prepare_reboot(void);
+extern void mach_prepare_shutdown(void);
+
 /* environment arguments from bootloader */
 extern unsigned long bus_clock, cpu_clock_freq;
 extern unsigned long memsize, highmemsize;
@@ -30,6 +34,13 @@ extern void __init prom_init_memory(void);
 extern void __init prom_init_cmdline(void);
 extern void __init prom_init_env(void);
 
+/* irq operation functions */
+extern void bonito_irqdispatch(void);
+extern void __init bonito_irq_init(void);
+extern void __init set_irq_trigger_mode(void);
+extern void __init mach_init_irq(void);
+extern void mach_irq_dispatch(unsigned int pending);
+
 /* PCI Configuration Registers */
 #define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
 
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
new file mode 100644
index 00000000000..8e60d363594
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON_MACHINE_H
+#define __ASM_MACH_LOONGSON_MACHINE_H
+
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
+
+#define LOONGSON_MACHNAME "lemote-fuloong-2e-box"
+
+#endif
+
+#endif /* __ASM_MACH_LOONGSON_MACHINE_H */
diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h
new file mode 100644
index 00000000000..bd7b3cba7e3
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/mem.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_MACH_LOONGSON_MEM_H
+#define __ASM_MACH_LOONGSON_MEM_H
+
+/*
+ * On Lemote Loongson 2e
+ *
+ * the high memory space starts from 512M.
+ * the peripheral registers reside between 0x1000:0000 and 0x2000:0000.
+ */
+
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+#define LOONGSON_HIGHMEM_START  0x20000000
+
+#define LOONGSON_MMIO_MEM_START 0x10000000
+#define LOONGSON_MMIO_MEM_END   0x20000000
+
+#endif
+
+#endif /* __ASM_MACH_LOONGSON_MEM_H */
diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h
index e229b2904cc..f1663ca81da 100644
--- a/arch/mips/include/asm/mach-loongson/pci.h
+++ b/arch/mips/include/asm/mach-loongson/pci.h
@@ -24,8 +24,14 @@
 
 extern struct pci_ops bonito64_pci_ops;
 
-#define LOONGSON2E_PCI_MEM_START	BONITO_PCILO1_BASE
-#define LOONGSON2E_PCI_MEM_END		(BONITO_PCILO1_BASE + 0x04000000 * 2)
-#define LOONGSON2E_PCI_IO_START		0x00004000UL
+#ifdef CONFIG_LEMOTE_FULOONG2E
+
+/* this pci memory space is mapped by pcimap in pci.c */
+#define LOONGSON_PCI_MEM_START	BONITO_PCILO1_BASE
+#define LOONGSON_PCI_MEM_END	(BONITO_PCILO1_BASE + 0x04000000 * 2)
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#endif
 
 #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
new file mode 100644
index 00000000000..376712a0e2f
--- /dev/null
+++ b/arch/mips/loongson/Kconfig
@@ -0,0 +1,31 @@
+choice
+    prompt "Machine Type"
+    depends on MACH_LOONGSON
+
+config LEMOTE_FULOONG2E
+    bool "Lemote Fuloong(2e) mini-PC"
+    select ARCH_SPARSEMEM_ENABLE
+    select CEVT_R4K
+    select CSRC_R4K
+    select SYS_HAS_CPU_LOONGSON2
+    select DMA_NONCOHERENT
+    select BOOT_ELF32
+    select BOARD_SCACHE
+    select HW_HAS_PCI
+    select I8259
+    select ISA
+    select IRQ_CPU
+    select SYS_SUPPORTS_32BIT_KERNEL
+    select SYS_SUPPORTS_64BIT_KERNEL
+    select SYS_SUPPORTS_LITTLE_ENDIAN
+    select SYS_SUPPORTS_HIGHMEM
+    select SYS_HAS_EARLY_PRINTK
+    select GENERIC_HARDIRQS_NO__DO_IRQ
+    select GENERIC_ISA_DMA_SUPPORT_BROKEN
+    select CPU_HAS_WB
+    help
+      Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
+      an FPGA northbridge
+
+      Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
+endchoice
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
new file mode 100644
index 00000000000..39048c455d7
--- /dev/null
+++ b/arch/mips/loongson/Makefile
@@ -0,0 +1,11 @@
+#
+# Common code for all Loongson based systems
+#
+
+obj-$(CONFIG_MACH_LOONGSON) += common/
+
+#
+# Lemote Fuloong mini-PC (Loongson 2E-based)
+#
+
+obj-$(CONFIG_LEMOTE_FULOONG2E)  += fuloong-2e/
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
new file mode 100644
index 00000000000..4e3889dec39
--- /dev/null
+++ b/arch/mips/loongson/common/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for loongson based machines.
+#
+
+obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
+    pci.o bonito-irq.o mem.o
+
+#
+# Early printk support
+#
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/loongson/common/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c
new file mode 100644
index 00000000000..3e31e7ad713
--- /dev/null
+++ b/arch/mips/loongson/common/bonito-irq.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+
+static inline void bonito_irq_enable(unsigned int irq)
+{
+	BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
+	mmiowb();
+}
+
+static inline void bonito_irq_disable(unsigned int irq)
+{
+	BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
+	mmiowb();
+}
+
+static struct irq_chip bonito_irq_type = {
+	.name	= "bonito_irq",
+	.ack	= bonito_irq_disable,
+	.mask	= bonito_irq_disable,
+	.mask_ack = bonito_irq_disable,
+	.unmask	= bonito_irq_enable,
+};
+
+static struct irqaction dma_timeout_irqaction = {
+	.handler	= no_action,
+	.name		= "dma_timeout",
+};
+
+void bonito_irq_init(void)
+{
+	u32 i;
+
+	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
+		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
+
+	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
+}
diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c
new file mode 100644
index 00000000000..75f1b243ee4
--- /dev/null
+++ b/arch/mips/loongson/common/cmdline.c
@@ -0,0 +1,52 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+int prom_argc;
+/* pmon passes arguments in 32bit pointers */
+int *_prom_argv;
+
+void __init prom_init_cmdline(void)
+{
+	int i;
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	prom_argc = fw_arg0;
+	_prom_argv = (int *)fw_arg1;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < prom_argc; i++) {
+		l = (long)_prom_argv[i];
+		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, ((char *)l));
+		strcat(arcs_cmdline, " ");
+	}
+
+	if ((strstr(arcs_cmdline, "console=")) == NULL)
+		strcat(arcs_cmdline, " console=ttyS0,115200");
+	if ((strstr(arcs_cmdline, "root=")) == NULL)
+		strcat(arcs_cmdline, " root=/dev/hda1");
+}
diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c
new file mode 100644
index 00000000000..bc73edc0cfd
--- /dev/null
+++ b/arch/mips/loongson/common/early_printk.c
@@ -0,0 +1,38 @@
+/*  early printk support
+ *
+ *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ *  Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/serial_reg.h>
+
+#include <loongson.h>
+#include <machine.h>
+
+#define PORT(base, offset) (u8 *)(base + offset)
+
+static inline unsigned int serial_in(phys_addr_t base, int offset)
+{
+	return readb(PORT(base, offset));
+}
+
+static inline void serial_out(phys_addr_t base, int offset, int value)
+{
+	writeb(value, PORT(base, offset));
+}
+
+void prom_putchar(char c)
+{
+	phys_addr_t uart_base =
+		(phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8);
+
+	while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(uart_base, UART_TX, c);
+}
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
new file mode 100644
index 00000000000..b9ef5038554
--- /dev/null
+++ b/arch/mips/loongson/common/env.c
@@ -0,0 +1,58 @@
+/*
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2003 ICT CAS
+ * Author: Michael Guo <guoyi@ict.ac.cn>
+ *
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+unsigned long bus_clock, cpu_clock_freq;
+unsigned long memsize, highmemsize;
+
+/* pmon passes arguments in 32bit pointers */
+int *_prom_envp;
+
+#define parse_even_earlier(res, option, p)				\
+do {									\
+	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
+			strict_strtol((char *)p + strlen(option"="),	\
+					10, &res);			\
+} while (0)
+
+void __init prom_init_env(void)
+{
+	long l;
+
+	/* firmware arguments are initialized in head.S */
+	_prom_envp = (int *)fw_arg2;
+
+	l = (long)*_prom_envp;
+	while (l != 0) {
+		parse_even_earlier(bus_clock, "busclock", l);
+		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
+		parse_even_earlier(memsize, "memsize", l);
+		parse_even_earlier(highmemsize, "highmemsize", l);
+		_prom_envp++;
+		l = (long)*_prom_envp;
+	}
+	if (memsize == 0)
+		memsize = 256;
+
+	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
+		bus_clock, cpu_clock_freq, memsize, highmemsize);
+}
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
new file mode 100644
index 00000000000..3abe927422a
--- /dev/null
+++ b/arch/mips/loongson/common/init.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+
+void __init prom_init(void)
+{
+    /* init base address of io space */
+	set_io_port_base((unsigned long)
+		ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
+
+	prom_init_cmdline();
+	prom_init_env();
+	prom_init_memory();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c
new file mode 100644
index 00000000000..f368c735cbd
--- /dev/null
+++ b/arch/mips/loongson/common/irq.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <loongson.h>
+/*
+ * the first level int-handler will jump here if it is a bonito irq
+ */
+void bonito_irqdispatch(void)
+{
+	u32 int_status;
+	int i;
+
+	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
+	int_status = BONITO_INTISR;
+	if (int_status & (1 << 10)) {
+		while (int_status & (1 << 10)) {
+			udelay(1);
+			int_status = BONITO_INTISR;
+		}
+	}
+
+	/* Get pending sources, masked by current enables */
+	int_status = BONITO_INTISR & BONITO_INTEN;
+
+	if (int_status != 0) {
+		i = __ffs(int_status);
+		int_status &= ~(1 << i);
+		do_IRQ(BONITO_IRQ_BASE + i);
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending;
+
+	pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	/* machine-specific plat_irq_dispatch */
+	mach_irq_dispatch(pending);
+}
+
+void __init arch_init_irq(void)
+{
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 * int-handler is not on bootstrap
+	 */
+	clear_c0_status(ST0_IM | ST0_BEV);
+	local_irq_disable();
+
+	/* setting irq trigger mode */
+	set_irq_trigger_mode();
+
+	/* no steer */
+	BONITO_INTSTEER = 0;
+
+	/*
+	 * Mask out all interrupt by writing "1" to all bit position in
+	 * the interrupt reset reg.
+	 */
+	BONITO_INTENCLR = ~0;
+
+	/* machine specific irq init */
+	mach_init_irq();
+}
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
new file mode 100644
index 00000000000..845b3fb47e0
--- /dev/null
+++ b/arch/mips/loongson/common/machtype.c
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <machine.h>
+
+const char *get_system_type(void)
+{
+	return LOONGSON_MACHNAME;
+}
+
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
new file mode 100644
index 00000000000..7c92f79b648
--- /dev/null
+++ b/arch/mips/loongson/common/mem.c
@@ -0,0 +1,35 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+
+#include <asm/bootinfo.h>
+
+#include <loongson.h>
+#include <mem.h>
+
+void __init prom_init_memory(void)
+{
+    add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
+#ifdef CONFIG_64BIT
+    if (highmemsize > 0)
+	add_memory_region(LOONGSON_HIGHMEM_START,
+		highmemsize << 20, BOOT_MEM_RAM);
+#endif /* CONFIG_64BIT */
+}
+
+/* override of arch/mips/mm/cache.c: __uncached_access */
+int __uncached_access(struct file *file, unsigned long addr)
+{
+	if (file->f_flags & O_SYNC)
+		return 1;
+
+	return addr >= __pa(high_memory) ||
+		((addr >= LOONGSON_MMIO_MEM_START) &&
+		 (addr < LOONGSON_MMIO_MEM_END));
+}
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
new file mode 100644
index 00000000000..a3a4abfb6c9
--- /dev/null
+++ b/arch/mips/loongson/common/pci.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/pci.h>
+
+#include <pci.h>
+#include <loongson.h>
+
+static struct resource loongson_pci_mem_resource = {
+	.name   = "pci memory space",
+	.start  = LOONGSON_PCI_MEM_START,
+	.end    = LOONGSON_PCI_MEM_END,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct resource loongson_pci_io_resource = {
+	.name   = "pci io space",
+	.start  = LOONGSON_PCI_IO_START,
+	.end    = IO_SPACE_LIMIT,
+	.flags  = IORESOURCE_IO,
+};
+
+static struct pci_controller  loongson_pci_controller = {
+	.pci_ops        = &bonito64_pci_ops,
+	.io_resource    = &loongson_pci_io_resource,
+	.mem_resource   = &loongson_pci_mem_resource,
+	.mem_offset     = 0x00000000UL,
+	.io_offset      = 0x00000000UL,
+};
+
+static void __init setup_pcimap(void)
+{
+	/*
+	 * local to PCI mapping for CPU accessing PCI space
+	 * CPU address space [256M,448M] is window for accessing pci space
+	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
+	 *
+	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
+	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
+	 */
+	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
+		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
+		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
+		BONITO_PCIMAP_WIN(0, 0);
+
+	/*
+	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
+	 */
+	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
+	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
+	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
+	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
+	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
+	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
+	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
+
+	/* avoid deadlock of PCI reading/writing lock operation */
+	LOONGSON_PCI_ISR4C = 0xd2000001ul;
+
+	/* can not change gnt to break pci transfer when device's gnt not
+	deassert for some broken device */
+	LOONGSON_PXARB_CFG = 0x00fe0105ul;
+}
+
+static int __init pcibios_init(void)
+{
+	setup_pcimap();
+
+	loongson_pci_controller.io_map_base = mips_io_port_base;
+
+	register_pci_controller(&loongson_pci_controller);
+
+	return 0;
+}
+
+arch_initcall(pcibios_init);
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
new file mode 100644
index 00000000000..97e918251ed
--- /dev/null
+++ b/arch/mips/loongson/common/reset.c
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Zhangjin Wu, wuzj@lemote.com
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+
+#include <loongson.h>
+
+static void loongson_restart(char *command)
+{
+	/* do preparation for reboot */
+	mach_prepare_reboot();
+
+	/* reboot via jumping to boot base address */
+	((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
+}
+
+static void loongson_halt(void)
+{
+	mach_prepare_shutdown();
+	while (1)
+		;
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = loongson_restart;
+	_machine_halt = loongson_halt;
+	pm_power_off = loongson_halt;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c
new file mode 100644
index 00000000000..4cd2aa9a342
--- /dev/null
+++ b/arch/mips/loongson/common/setup.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <linux/module.h>
+
+#include <asm/wbflush.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#include <linux/screen_info.h>
+#endif
+
+void (*__wbflush)(void);
+EXPORT_SYMBOL(__wbflush);
+
+static void wbflush_loongson(void)
+{
+	asm(".set\tpush\n\t"
+	    ".set\tnoreorder\n\t"
+	    ".set mips3\n\t"
+	    "sync\n\t"
+	    "nop\n\t"
+	    ".set\tpop\n\t"
+	    ".set mips0\n\t");
+}
+
+void __init plat_mem_setup(void)
+{
+	__wbflush = wbflush_loongson;
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	conswitchp = &vga_con;
+
+	screen_info = (struct screen_info) {
+		0, 25,		/* orig-x, orig-y */
+		    0,		/* unused */
+		    0,		/* orig-video-page */
+		    0,		/* orig-video-mode */
+		    80,		/* orig-video-cols */
+		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
+		    25,		/* orig-video-lines */
+		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
+		    16		/* orig-video-points */
+	};
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}
diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
new file mode 100644
index 00000000000..b13d1717465
--- /dev/null
+++ b/arch/mips/loongson/common/time.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
+ * Author: Fuxin Zhang, zhangfx@lemote.com
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <asm/mc146818-time.h>
+#include <asm/time.h>
+
+#include <loongson.h>
+
+void __init plat_time_init(void)
+{
+	/* setup mips r4k timer */
+	mips_hpt_frequency = cpu_clock_freq / 2;
+}
+
+unsigned long read_persistent_clock(void)
+{
+	return mc146818_get_cmos_time();
+}
diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile
index feb1d6bba49..96e45c13c85 100644
--- a/arch/mips/loongson/fuloong-2e/Makefile
+++ b/arch/mips/loongson/fuloong-2e/Makefile
@@ -2,12 +2,6 @@
 # Makefile for Lemote Fuloong2e mini-PC board.
 #
 
-obj-y += setup.o init.o reset.o irq.o pci.o bonito-irq.o mem.o \
-		env.o cmdline.o time.o machtype.o
-
-#
-# Early printk support
-#
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-y += irq.o reset.o machtype.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/fuloong-2e/bonito-irq.c b/arch/mips/loongson/fuloong-2e/bonito-irq.c
deleted file mode 100644
index 3e31e7ad713..00000000000
--- a/arch/mips/loongson/fuloong-2e/bonito-irq.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/interrupt.h>
-
-#include <loongson.h>
-
-static inline void bonito_irq_enable(unsigned int irq)
-{
-	BONITO_INTENSET = (1 << (irq - BONITO_IRQ_BASE));
-	mmiowb();
-}
-
-static inline void bonito_irq_disable(unsigned int irq)
-{
-	BONITO_INTENCLR = (1 << (irq - BONITO_IRQ_BASE));
-	mmiowb();
-}
-
-static struct irq_chip bonito_irq_type = {
-	.name	= "bonito_irq",
-	.ack	= bonito_irq_disable,
-	.mask	= bonito_irq_disable,
-	.mask_ack = bonito_irq_disable,
-	.unmask	= bonito_irq_enable,
-};
-
-static struct irqaction dma_timeout_irqaction = {
-	.handler	= no_action,
-	.name		= "dma_timeout",
-};
-
-void bonito_irq_init(void)
-{
-	u32 i;
-
-	for (i = BONITO_IRQ_BASE; i < BONITO_IRQ_BASE + 32; i++)
-		set_irq_chip_and_handler(i, &bonito_irq_type, handle_level_irq);
-
-	setup_irq(BONITO_IRQ_BASE + 10, &dma_timeout_irqaction);
-}
diff --git a/arch/mips/loongson/fuloong-2e/cmdline.c b/arch/mips/loongson/fuloong-2e/cmdline.c
deleted file mode 100644
index 75f1b243ee4..00000000000
--- a/arch/mips/loongson/fuloong-2e/cmdline.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-int prom_argc;
-/* pmon passes arguments in 32bit pointers */
-int *_prom_argv;
-
-void __init prom_init_cmdline(void)
-{
-	int i;
-	long l;
-
-	/* firmware arguments are initialized in head.S */
-	prom_argc = fw_arg0;
-	_prom_argv = (int *)fw_arg1;
-
-	/* arg[0] is "g", the rest is boot parameters */
-	arcs_cmdline[0] = '\0';
-	for (i = 1; i < prom_argc; i++) {
-		l = (long)_prom_argv[i];
-		if (strlen(arcs_cmdline) + strlen(((char *)l) + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, ((char *)l));
-		strcat(arcs_cmdline, " ");
-	}
-
-	if ((strstr(arcs_cmdline, "console=")) == NULL)
-		strcat(arcs_cmdline, " console=ttyS0,115200");
-	if ((strstr(arcs_cmdline, "root=")) == NULL)
-		strcat(arcs_cmdline, " root=/dev/hda1");
-}
diff --git a/arch/mips/loongson/fuloong-2e/early_printk.c b/arch/mips/loongson/fuloong-2e/early_printk.c
deleted file mode 100644
index 3e0a6eaa404..00000000000
--- a/arch/mips/loongson/fuloong-2e/early_printk.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*  early printk support
- *
- *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *  Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- *  Author: Wu Zhangjin, wuzj@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/serial_reg.h>
-
-#include <loongson.h>
-
-#define UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
-
-#define PORT(base, offset) (u8 *)(base + offset)
-
-static inline unsigned int serial_in(phys_addr_t base, int offset)
-{
-	return readb(PORT(base, offset));
-}
-
-static inline void serial_out(phys_addr_t base, int offset, int value)
-{
-	writeb(value, PORT(base, offset));
-}
-
-void prom_putchar(char c)
-{
-	phys_addr_t uart_base =
-		(phys_addr_t) ioremap_nocache(UART_BASE, 8);
-
-	while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(uart_base, UART_TX, c);
-}
diff --git a/arch/mips/loongson/fuloong-2e/env.c b/arch/mips/loongson/fuloong-2e/env.c
deleted file mode 100644
index b9ef5038554..00000000000
--- a/arch/mips/loongson/fuloong-2e/env.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Based on Ocelot Linux port, which is
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2003 ICT CAS
- * Author: Michael Guo <guoyi@ict.ac.cn>
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-unsigned long bus_clock, cpu_clock_freq;
-unsigned long memsize, highmemsize;
-
-/* pmon passes arguments in 32bit pointers */
-int *_prom_envp;
-
-#define parse_even_earlier(res, option, p)				\
-do {									\
-	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-			strict_strtol((char *)p + strlen(option"="),	\
-					10, &res);			\
-} while (0)
-
-void __init prom_init_env(void)
-{
-	long l;
-
-	/* firmware arguments are initialized in head.S */
-	_prom_envp = (int *)fw_arg2;
-
-	l = (long)*_prom_envp;
-	while (l != 0) {
-		parse_even_earlier(bus_clock, "busclock", l);
-		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
-		parse_even_earlier(memsize, "memsize", l);
-		parse_even_earlier(highmemsize, "highmemsize", l);
-		_prom_envp++;
-		l = (long)*_prom_envp;
-	}
-	if (memsize == 0)
-		memsize = 256;
-
-	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
-		bus_clock, cpu_clock_freq, memsize, highmemsize);
-}
diff --git a/arch/mips/loongson/fuloong-2e/init.c b/arch/mips/loongson/fuloong-2e/init.c
deleted file mode 100644
index 3abe927422a..00000000000
--- a/arch/mips/loongson/fuloong-2e/init.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-void __init prom_init(void)
-{
-    /* init base address of io space */
-	set_io_port_base((unsigned long)
-		ioremap(BONITO_PCIIO_BASE, BONITO_PCIIO_SIZE));
-
-	prom_init_cmdline();
-	prom_init_env();
-	prom_init_memory();
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index 9585f5aa7cc..7888cf69424 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -7,39 +7,12 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  */
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/i8259.h>
 
 #include <loongson.h>
-/*
- * the first level int-handler will jump here if it is a bonito irq
- */
-static void bonito_irqdispatch(void)
-{
-	u32 int_status;
-	int i;
-
-	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
-	int_status = BONITO_INTISR;
-	if (int_status & (1 << 10)) {
-		while (int_status & (1 << 10)) {
-			udelay(1);
-			int_status = BONITO_INTISR;
-		}
-	}
-
-	/* Get pending sources, masked by current enables */
-	int_status = BONITO_INTISR & BONITO_INTEN;
-
-	if (int_status != 0) {
-		i = __ffs(int_status);
-		int_status &= ~(1 << i);
-		do_IRQ(BONITO_IRQ_BASE + i);
-	}
-}
 
 static void i8259_irqdispatch(void)
 {
@@ -52,10 +25,8 @@ static void i8259_irqdispatch(void)
 		spurious_interrupt();
 }
 
-asmlinkage void plat_irq_dispatch(void)
+asmlinkage void mach_irq_dispatch(unsigned int pending)
 {
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-
 	if (pending & CAUSEF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
@@ -73,26 +44,15 @@ static struct irqaction cascade_irqaction = {
 	.name = "cascade",
 };
 
-void __init arch_init_irq(void)
+void __init set_irq_trigger_mode(void)
 {
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 * int-handler is not on bootstrap
-	 */
-	clear_c0_status(ST0_IM | ST0_BEV);
-	local_irq_disable();
-
 	/* most bonito irq should be level triggered */
 	BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR |
-		BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
-	BONITO_INTSTEER = 0;
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	BONITO_INTENCLR = ~0;
+	    BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES;
+}
 
+void __init mach_init_irq(void)
+{
 	/* init all controller
 	 *   0-15         ------> i8259 interrupt
 	 *   16-23        ------> mips cpu interrupt
diff --git a/arch/mips/loongson/fuloong-2e/machtype.c b/arch/mips/loongson/fuloong-2e/machtype.c
deleted file mode 100644
index e03aa0de617..00000000000
--- a/arch/mips/loongson/fuloong-2e/machtype.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-const char *get_system_type(void)
-{
-	return "lemote-fuloong-2e-box";
-}
-
diff --git a/arch/mips/loongson/fuloong-2e/mem.c b/arch/mips/loongson/fuloong-2e/mem.c
deleted file mode 100644
index 6a7feb178fa..00000000000
--- a/arch/mips/loongson/fuloong-2e/mem.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/fs.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-
-#include <asm/bootinfo.h>
-
-#include <loongson.h>
-
-void __init prom_init_memory(void)
-{
-    add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
-#ifdef CONFIG_64BIT
-    if (highmemsize > 0)
-		add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM);
-#endif /* CONFIG_64BIT */
-}
-
-/* override of arch/mips/mm/cache.c: __uncached_access */
-int __uncached_access(struct file *file, unsigned long addr)
-{
-	if (file->f_flags & O_SYNC)
-		return 1;
-
-	/*
-	 * On the Lemote Loongson 2e system, the peripheral registers
-	 * reside between 0x1000:0000 and 0x2000:0000.
-	 */
-	return addr >= __pa(high_memory) ||
-		((addr >= 0x10000000) && (addr < 0x20000000));
-}
diff --git a/arch/mips/loongson/fuloong-2e/pci.c b/arch/mips/loongson/fuloong-2e/pci.c
deleted file mode 100644
index 9812c30cc6e..00000000000
--- a/arch/mips/loongson/fuloong-2e/pci.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/pci.h>
-
-#include <pci.h>
-#include <loongson.h>
-
-static struct resource loongson2e_pci_mem_resource = {
-	.name   = "LOONGSON2E PCI MEM",
-	.start  = LOONGSON2E_PCI_MEM_START,
-	.end    = LOONGSON2E_PCI_MEM_END,
-	.flags  = IORESOURCE_MEM,
-};
-
-static struct resource loongson2e_pci_io_resource = {
-	.name   = "LOONGSON2E PCI IO MEM",
-	.start  = LOONGSON2E_PCI_IO_START,
-	.end    = IO_SPACE_LIMIT,
-	.flags  = IORESOURCE_IO,
-};
-
-static struct pci_controller  loongson2e_pci_controller = {
-	.pci_ops        = &bonito64_pci_ops,
-	.io_resource    = &loongson2e_pci_io_resource,
-	.mem_resource   = &loongson2e_pci_mem_resource,
-	.mem_offset     = 0x00000000UL,
-	.io_offset      = 0x00000000UL,
-};
-
-static void __init setup_pcimap(void)
-{
-	/*
-	 * local to PCI mapping for CPU accessing PCI space
-	 * CPU address space [256M,448M] is window for accessing pci space
-	 * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M]
-	 *
-	 * pcimap: PCI_MAP2  PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0
-	 * 	     [<2G]   [384M,448M] [320M,384M] [0M,64M]
-	 */
-	BONITO_PCIMAP = BONITO_PCIMAP_PCIMAP_2 |
-		BONITO_PCIMAP_WIN(2, BONITO_PCILO2_BASE) |
-		BONITO_PCIMAP_WIN(1, BONITO_PCILO1_BASE) |
-		BONITO_PCIMAP_WIN(0, 0);
-
-	/*
-	 * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M]
-	 */
-	BONITO_PCIBASE0 = 0x80000000ul;   /* base: 2G -> mmap: 0M */
-	/* size: 256M, burst transmission, pre-fetch enable, 64bit */
-	LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul;
-	LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful;
-	LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */
-	LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul;
-	LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */
-	LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul;
-
-	/* avoid deadlock of PCI reading/writing lock operation */
-	LOONGSON_PCI_ISR4C = 0xd2000001ul;
-
-	/* can not change gnt to break pci transfer when device's gnt not
-	deassert for some broken device */
-	LOONGSON_PXARB_CFG = 0x00fe0105ul;
-}
-
-static int __init pcibios_init(void)
-{
-	setup_pcimap();
-
-	loongson2e_pci_controller.io_map_base = mips_io_port_base;
-
-	register_pci_controller(&loongson2e_pci_controller);
-
-	return 0;
-}
-
-arch_initcall(pcibios_init);
diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c
index c21299af7f6..677fe186db9 100644
--- a/arch/mips/loongson/fuloong-2e/reset.c
+++ b/arch/mips/loongson/fuloong-2e/reset.c
@@ -1,44 +1,23 @@
-/*
+/* Board-specific reboot/shutdown routines
+ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
+ *
+ * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
+ * Author: Wu Zhangjin, wuzj@lemote.com
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
- *
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Zhangjin Wu, wuzj@lemote.com
  */
-#include <linux/init.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
 
 #include <loongson.h>
 
-static void loongson2e_restart(char *command)
+void mach_prepare_reboot(void)
 {
-	/* do preparation for reboot */
 	BONITO_BONGENCFG &= ~(1 << 2);
 	BONITO_BONGENCFG |= (1 << 2);
-
-	/* reboot via jumping to boot base address */
-	((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) ();
 }
 
-static void loongson2e_halt(void)
+void mach_prepare_shutdown(void)
 {
-	while (1)
-		;
 }
-
-static int __init mips_reboot_setup(void)
-{
-	_machine_restart = loongson2e_restart;
-	_machine_halt = loongson2e_halt;
-	pm_power_off = loongson2e_halt;
-
-	return 0;
-}
-
-arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/loongson/fuloong-2e/time.c b/arch/mips/loongson/fuloong-2e/time.c
deleted file mode 100644
index b13d1717465..00000000000
--- a/arch/mips/loongson/fuloong-2e/time.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
- * Author: Wu Zhangjin, wuzj@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <asm/mc146818-time.h>
-#include <asm/time.h>
-
-#include <loongson.h>
-
-void __init plat_time_init(void)
-{
-	/* setup mips r4k timer */
-	mips_hpt_frequency = cpu_clock_freq / 2;
-}
-
-unsigned long read_persistent_clock(void)
-{
-	return mc146818_get_cmos_time();
-}
-- 
cgit v1.2.3


From 3209e70e5ed1821be8d9b87fe9e8bd6cffa4b4c7 Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Thu, 2 Jul 2009 23:27:12 +0800
Subject: MIPS: Loongson: Add a machtype kernel command line argument

The difference between some loongson-based machines is very small, so, if
there is no necessary to add new kernel config options to cope with this
difference, it will be better to share the same kernel image file between
them, benefit from this, the linux distribution developers only have a need
to compile the kernel one time.

This machtype kernel command line argument will be used later to share the
same kernel image file between two different machines(menglong & yeeloong)
made by lemote.

Thanks very much to Zhang Le for cleaning up the machtype implementation.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/bootinfo.h              | 12 +++++++++
 arch/mips/include/asm/mach-loongson/machine.h |  2 +-
 arch/mips/loongson/common/Makefile            |  2 +-
 arch/mips/loongson/common/machtype.c          | 35 ++++++++++++++++++++++++++-
 arch/mips/loongson/fuloong-2e/Makefile        |  2 +-
 5 files changed, 49 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 610fe3af7a0..f5dfaf6a160 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -7,6 +7,7 @@
  * Copyright (C) 1995, 1996 Andreas Busse
  * Copyright (C) 1995, 1996 Stoned Elipot
  * Copyright (C) 1995, 1996 Paul M. Antoine.
+ * Copyright (C) 2009       Zhang Le
  */
 #ifndef _ASM_BOOTINFO_H
 #define _ASM_BOOTINFO_H
@@ -57,6 +58,17 @@
 #define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/
 #define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/
 
+/*
+ * Valid machtype for Loongson family
+ */
+#define MACH_LOONGSON_UNKNOWN  0
+#define MACH_LEMOTE_FL2E       1
+#define MACH_LEMOTE_FL2F       2
+#define MACH_LEMOTE_ML2F7      3
+#define MACH_LEMOTE_YL2F89     4
+#define MACH_DEXXON_GDIUM2F10  5
+#define MACH_LOONGSON_END      6
+
 #define CL_SIZE			COMMAND_LINE_SIZE
 
 extern char *system_type;
diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h
index 8e60d363594..206ea206791 100644
--- a/arch/mips/include/asm/mach-loongson/machine.h
+++ b/arch/mips/include/asm/mach-loongson/machine.h
@@ -15,7 +15,7 @@
 
 #define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
 
-#define LOONGSON_MACHNAME "lemote-fuloong-2e-box"
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
 
 #endif
 
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 4e3889dec39..656b3cc0a2a 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
-    pci.o bonito-irq.o mem.o
+    pci.o bonito-irq.o mem.o machtype.o
 
 #
 # Early printk support
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 845b3fb47e0..7b348248de7 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -2,16 +2,49 @@
  * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology
  * Author: Wu Zhangjin, wuzj@lemote.com
  *
+ * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+#include <linux/errno.h>
+#include <asm/bootinfo.h>
 
+#include <loongson.h>
 #include <machine.h>
 
+static const char *system_types[] = {
+	[MACH_LOONGSON_UNKNOWN]         "unknown loongson machine",
+	[MACH_LEMOTE_FL2E]              "lemote-fuloong-2e-box",
+	[MACH_LEMOTE_FL2F]              "lemote-fuloong-2f-box",
+	[MACH_LEMOTE_ML2F7]             "lemote-mengloong-2f-7inches",
+	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
+	[MACH_DEXXON_GDIUM2F10]         "dexxon-gidum-2f-10inches",
+	[MACH_LOONGSON_END]             NULL,
+};
+
 const char *get_system_type(void)
 {
-	return LOONGSON_MACHNAME;
+	if (mips_machtype == MACH_UNKNOWN)
+		mips_machtype = LOONGSON_MACHTYPE;
+
+	return system_types[mips_machtype];
 }
 
+static __init int machtype_setup(char *str)
+{
+	int machtype = MACH_LEMOTE_FL2E;
+
+	if (!str)
+		return -EINVAL;
+
+	for (; system_types[machtype]; machtype++)
+		if (strstr(system_types[machtype], str)) {
+			mips_machtype = machtype;
+			break;
+		}
+	return 0;
+}
+__setup("machtype=", machtype_setup);
diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile
index 96e45c13c85..3aba5fcc09d 100644
--- a/arch/mips/loongson/fuloong-2e/Makefile
+++ b/arch/mips/loongson/fuloong-2e/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Lemote Fuloong2e mini-PC board.
 #
 
-obj-y += irq.o reset.o machtype.o
+obj-y += irq.o reset.o
 
 EXTRA_CFLAGS += -Werror
-- 
cgit v1.2.3


From 3702bba5eb4f7a0c89107089af6fd9bc2966b65a Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Thu, 2 Jul 2009 23:27:41 +0800
Subject: MIPS: Loongson: Add GCC 4.4 support for Loongson2E

Because only gcc >=4.4 have loongson-specific support, we need to choose
the suitable -march argument for gcc <= 4.3 and gcc >= 4.4, and here, we
use -march=loongson2e for loongson2e.

Thanks goes to Arnaud Patard <apatard@mandriva.com> for suggestion of
using cc-options(Documentation/kbuild/makefiles.txt). and thanks Zhang
Le for introducing the new CPU_LOONGSON2E kernel option.

NOTE: -mtune option is not need if -march and -mtune use the same value.

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig          | 18 +++++++++++-------
 arch/mips/Makefile         |  6 +++++-
 arch/mips/loongson/Kconfig |  2 +-
 3 files changed, 17 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 482dcc3b91e..466920aa067 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1030,12 +1030,10 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
-config CPU_LOONGSON2
-	bool "Loongson 2"
-	depends on SYS_HAS_CPU_LOONGSON2
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select CPU_SUPPORTS_64BIT_KERNEL
-	select CPU_SUPPORTS_HIGHMEM
+config CPU_LOONGSON2E
+	bool "Loongson 2E"
+	depends on SYS_HAS_CPU_LOONGSON2E
+	select CPU_LOONGSON2
 	help
 	  The Loongson 2E processor implements the MIPS III instruction set
 	  with many extensions.
@@ -1282,7 +1280,13 @@ config CPU_CAVIUM_OCTEON
 
 endchoice
 
-config SYS_HAS_CPU_LOONGSON2
+config CPU_LOONGSON2
+	bool
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+
+config SYS_HAS_CPU_LOONGSON2E
 	bool
 
 config SYS_HAS_CPU_MIPS32_R1
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 94d6f581386..1efa9aa6488 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -120,7 +120,11 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2)	+= -march=r4600 -Wa,--trap
+# only gcc >= 4.4 have the loongson-specific support
+cflags-$(CONFIG_CPU_LOONGSON2)	+= -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+	$(call cc-option,-march=loongson2e,-march=r4600)
+
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 376712a0e2f..d45092505fa 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -7,7 +7,7 @@ config LEMOTE_FULOONG2E
     select ARCH_SPARSEMEM_ENABLE
     select CEVT_R4K
     select CSRC_R4K
-    select SYS_HAS_CPU_LOONGSON2
+    select SYS_HAS_CPU_LOONGSON2E
     select DMA_NONCOHERENT
     select BOOT_ELF32
     select BOARD_SCACHE
-- 
cgit v1.2.3


From 6f4c7b32e156ac67ae170554cfba0929272c7adf Mon Sep 17 00:00:00 2001
From: Wu Zhangjin <wuzhangjin@gmail.com>
Date: Thu, 2 Jul 2009 23:28:04 +0800
Subject: MIPS: Loongson: Update the default config file for fuloong2e

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/configs/fulong_defconfig    | 1912 ---------------------------------
 arch/mips/configs/fuloong2e_defconfig | 1819 +++++++++++++++++++++++++++++++
 2 files changed, 1819 insertions(+), 1912 deletions(-)
 delete mode 100644 arch/mips/configs/fulong_defconfig
 create mode 100644 arch/mips/configs/fuloong2e_defconfig

(limited to 'arch')

diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
deleted file mode 100644
index 786a9bc9a69..00000000000
--- a/arch/mips/configs/fulong_defconfig
+++ /dev/null
@@ -1,1912 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Fri Nov 28 17:53:48 2008
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-CONFIG_LEMOTE_FULONG=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_I8259=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-
-#
-# CPU selection
-#
-CONFIG_CPU_LOONGSON2=y
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_LOONGSON2=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-# CONFIG_PAGE_SIZE_4KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PAGE_SIZE_16KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_WB=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="lm32"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-CONFIG_ISA=y
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=y
-CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_PHONET=m
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-CONFIG_NET_9P=m
-# CONFIG_NET_9P_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x1fc00000
-CONFIG_MTD_PHYSMAP_LEN=0x80000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-CONFIG_MACVLAN=m
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-CONFIG_VETH=m
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOL2TP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_NET_FC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-CONFIG_I2C_VIAPRO=m
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DMA_CONTIG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_VIDEO_SH_MOBILE_CEU=m
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-CONFIG_USB_M5602=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_USB_DSBR is not set
-CONFIG_USB_SI470X=m
-CONFIG_USB_MR800=m
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-CONFIG_FB_RADEON=y
-# CONFIG_FB_RADEON_I2C is not set
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_VIA82XX=m
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_MIPS=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-CONFIG_USB_WUSB_CBAF=m
-# CONFIG_USB_WUSB_CBAF_DEBUG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_C67X00_HCD=m
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_ISP1760_HCD=m
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
-# CONFIG_USB_STORAGE_KARMA is not set
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_SEVSEG=m
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_VST=m
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=m
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-CONFIG_UIO=m
-CONFIG_UIO_CIF=m
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=m
-CONFIG_EXT4DEV_COMPAT=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=936
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_OMFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp936"
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_CIFS_DEBUG2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-CONFIG_NLS_CODEPAGE_936=y
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=2048
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
new file mode 100644
index 00000000000..0197f0de6b3
--- /dev/null
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -0,0 +1,1819 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Thu Jul  2 22:37:00 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_MACH_LOONGSON=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_LEMOTE_FULOONG2E=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_LOONGSON2E=y
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_LOONGSON2=y
+CONFIG_SYS_HAS_CPU_LOONGSON2E=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+# CONFIG_PAGE_SIZE_4KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-fuloong2e"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_HIBERNATION is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_PHONET=m
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TC35815 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NET_FC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+# CONFIG_FB_RADEON_I2C is not set
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_VIA82XX=m
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+CONFIG_HID_PID=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=y
+CONFIG_USB_MOUSE=y
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_C67X00_HCD=m
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=m
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_SEVSEG=m
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_VST=m
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp936"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=y
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From d47fbb5996269f3081deb7a1b4ba717557256555 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Wed, 15 Jul 2009 12:09:34 +0200
Subject: MIPS: AR7: Make board code register ar7_wdt as a platform device

This patch makes the board code register the ar7_wdt driver as a platform
device. We move the dynamic resource calculation here since the driver
should not be aware of the AR7 SoC version it is running on.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/ar7/platform.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index cf50fa29b19..e2278c04459 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -417,6 +417,20 @@ static struct platform_device ar7_udc = {
 	.num_resources = ARRAY_SIZE(usb_res),
 };
 
+static struct resource ar7_wdt_res = {
+	.name = "regs",
+	.start = -1, /* Filled at runtime */
+	.end = -1, /* Filled at runtime */
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ar7_wdt = {
+	.id = -1,
+	.name  = "ar7_wdt",
+	.resource = &ar7_wdt_res,
+	.num_resources = 1,
+};
+
 static inline unsigned char char2hex(char h)
 {
 	switch (h) {
@@ -487,6 +501,7 @@ static void __init detect_leds(void)
 
 static int __init ar7_register_devices(void)
 {
+	u16 chip_id;
 	int res;
 #ifdef CONFIG_SERIAL_8250
 	static struct uart_port uart_port[2];
@@ -565,6 +580,23 @@ static int __init ar7_register_devices(void)
 
 	res = platform_device_register(&ar7_udc);
 
+	chip_id = ar7_chip_id();
+	switch (chip_id) {
+	case AR7_CHIP_7100:
+	case AR7_CHIP_7200:
+		ar7_wdt_res.start = AR7_REGS_WDT;
+		break;
+	case AR7_CHIP_7300:
+		ar7_wdt_res.start = UR8_REGS_WDT;
+		break;
+	default:
+		break;
+	}
+
+	ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
+
+	res = platform_device_register(&ar7_wdt);
+
 	return res;
 }
 arch_initcall(ar7_register_devices);
-- 
cgit v1.2.3


From 24ffce18a4b6b5e9769200582c09df7ff044259f Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 4 Aug 2009 16:54:04 +0200
Subject: MIPS: Convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/hardirq.h | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/hardirq.h b/arch/mips/include/asm/hardirq.h
index 90bf399e6dd..c977a86c2c6 100644
--- a/arch/mips/include/asm/hardirq.h
+++ b/arch/mips/include/asm/hardirq.h
@@ -10,15 +10,9 @@
 #ifndef _ASM_HARDIRQ_H
 #define _ASM_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 extern void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif /* _ASM_HARDIRQ_H */
-- 
cgit v1.2.3


From a0b54e256d513ed99e456bea6e4e188ff92e7c46 Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 31 Jul 2009 16:58:18 -0400
Subject: MIPS: Use PAGE_SIZE in assembly instead of _PAGE_SIZE.

Now that PAGE_SIZE is available to assembly directly, there is no need
to separately expose it as _PAGE_SIZE through asm-offsets.

In addition, remove _PAGE_SHIFT from asm-offsets, since it was never
needed, and is not used anywhere.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/asm-offsets.c |  3 ---
 arch/mips/kernel/vmlinux.lds.S | 15 ++++++++-------
 arch/mips/power/hibernate.S    |  3 ++-
 3 files changed, 10 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 8d006ec6567..2c1e1d02338 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -183,9 +183,6 @@ void output_mm_defines(void)
 	OFFSET(MM_PGD, mm_struct, pgd);
 	OFFSET(MM_CONTEXT, mm_struct, context);
 	BLANK();
-	DEFINE(_PAGE_SIZE, PAGE_SIZE);
-	DEFINE(_PAGE_SHIFT, PAGE_SHIFT);
-	BLANK();
 	DEFINE(_PGD_T_SIZE, sizeof(pgd_t));
 	DEFINE(_PMD_T_SIZE, sizeof(pmd_t));
 	DEFINE(_PTE_T_SIZE, sizeof(pte_t));
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 1474c18fb77..ae8c1976df5 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -1,4 +1,5 @@
 #include <asm/asm-offsets.h>
+#include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 
 #undef mips
@@ -76,7 +77,7 @@ SECTIONS
 		 * of ‘init_thread_union’ is greater than maximum
 		 * object file alignment.  Using 32768
 		 */
-		. = ALIGN(_PAGE_SIZE);
+		. = ALIGN(PAGE_SIZE);
 		*(.data.init_task)
 
 		DATA_DATA
@@ -96,12 +97,12 @@ SECTIONS
 		*(.sdata)
 	}
 
-	. = ALIGN(_PAGE_SIZE);
+	. = ALIGN(PAGE_SIZE);
 	.data_nosave : {
 		__nosave_begin = .;
 		*(.data.nosave)
 	}
-	. = ALIGN(_PAGE_SIZE);
+	. = ALIGN(PAGE_SIZE);
 	__nosave_end = .;
 
 	. = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT);
@@ -111,7 +112,7 @@ SECTIONS
 	_edata =  .;			/* End of data section */
 
 	/* will be freed after init */
-	. = ALIGN(_PAGE_SIZE);		/* Init code and data */
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
 	__init_begin = .;
 	.init.text : {
 		_sinittext = .;
@@ -151,15 +152,15 @@ SECTIONS
 		EXIT_DATA
 	}
 #if defined(CONFIG_BLK_DEV_INITRD)
-	. = ALIGN(_PAGE_SIZE);
+	. = ALIGN(PAGE_SIZE);
 	.init.ramfs : {
 		__initramfs_start = .;
 		*(.init.ramfs)
 		__initramfs_end = .;
 	}
 #endif
-	PERCPU(_PAGE_SIZE)
-	. = ALIGN(_PAGE_SIZE);
+	PERCPU(PAGE_SIZE)
+	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	/* freed after init ends here */
 
diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S
index 4b8174b382d..0cf86fb32ec 100644
--- a/arch/mips/power/hibernate.S
+++ b/arch/mips/power/hibernate.S
@@ -8,6 +8,7 @@
  *         Wu Zhangjin <wuzj@lemote.com>
  */
 #include <asm/asm-offsets.h>
+#include <asm/page.h>
 #include <asm/regdef.h>
 #include <asm/asm.h>
 
@@ -34,7 +35,7 @@ LEAF(swsusp_arch_resume)
 0:
 	PTR_L t1, PBE_ADDRESS(t0)   /* source */
 	PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */
-	PTR_ADDIU t3, t1, _PAGE_SIZE
+	PTR_ADDIU t3, t1, PAGE_SIZE
 1:
 	REG_L t8, (t1)
 	REG_S t8, (t2)
-- 
cgit v1.2.3


From 6eb10bc9e2deab06630261cd05c4cb1e9a60e980 Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 31 Jul 2009 16:58:19 -0400
Subject: MIPS: Clean up linker script using new linker script macros.

This patch results in fewer output sections and in some data being
reordered, but should have no functional impact.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/vmlinux.lds.S | 86 ++++--------------------------------------
 1 file changed, 8 insertions(+), 78 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index ae8c1976df5..2769bed3d2a 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -43,13 +43,7 @@ SECTIONS
 	} :text = 0
 	_etext = .;	/* End of text section */
 
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/* Exception table for data bus errors */
 	__dbe_table : {
@@ -66,20 +60,10 @@ SECTIONS
 	/* writeable */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
-		/*
-		 * This ALIGN is needed as a workaround for a bug a
-		 * gcc bug upto 4.1 which limits the maximum alignment
-		 * to at most 32kB and results in the following
-		 * warning:
-		 *
-		 *  CC      arch/mips/kernel/init_task.o
-		 * arch/mips/kernel/init_task.c:30: warning: alignment
-		 * of ‘init_thread_union’ is greater than maximum
-		 * object file alignment.  Using 32768
-		 */
-		. = ALIGN(PAGE_SIZE);
-		*(.data.init_task)
 
+		INIT_TASK_DATA(PAGE_SIZE)
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
 		DATA_DATA
 		CONSTRUCTORS
 	}
@@ -96,51 +80,13 @@ SECTIONS
 	.sdata : {
 		*(.sdata)
 	}
-
-	. = ALIGN(PAGE_SIZE);
-	.data_nosave : {
-		__nosave_begin = .;
-		*(.data.nosave)
-	}
-	. = ALIGN(PAGE_SIZE);
-	__nosave_end = .;
-
-	. = ALIGN(1 << CONFIG_MIPS_L1_CACHE_SHIFT);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
 	_edata =  .;			/* End of data section */
 
 	/* will be freed after init */
 	. = ALIGN(PAGE_SIZE);		/* Init code and data */
 	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 
 	/* .exit.text is discarded at runtime, not link time, to deal with
 	 * references from .rodata
@@ -151,29 +97,13 @@ SECTIONS
 	.exit.data : {
 		EXIT_DATA
 	}
-#if defined(CONFIG_BLK_DEV_INITRD)
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
+
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	/* freed after init ends here */
 
-	__bss_start = .;	/* BSS */
-	.sbss  : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
+	BSS_SECTION(0, 0, 0)
 
 	_end = . ;
 
-- 
cgit v1.2.3


From f4c6b6bc5a4fc8d607f2d89369008c85a3a12a8b Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 17 Sep 2009 02:25:05 +0200
Subject: MIPS: Consolidate all CONFIG_CPU_HAS_LLSC use in a single C file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/system.h   | 12 ++++++++++++
 arch/mips/kernel/octeon_switch.S |  3 ---
 arch/mips/kernel/r2300_switch.S  |  3 ---
 arch/mips/kernel/r4k_switch.S    |  3 ---
 4 files changed, 12 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
index cd30f83235b..a2e9239b45a 100644
--- a/arch/mips/include/asm/system.h
+++ b/arch/mips/include/asm/system.h
@@ -63,11 +63,23 @@ do {									\
 #define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0)
 #endif
 
+#ifdef CONFIG_CPU_HAS_LLSC
+#define __clear_software_ll_bit() do { } while (0)
+#else
+extern unsigned long ll_bit;
+
+#define __clear_software_ll_bit()					\
+do {									\
+	ll_bit = 0;							\
+} while (0)
+#endif
+
 #define switch_to(prev, next, last)					\
 do {									\
 	__mips_mt_fpaff_switch_to(prev);				\
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
+	__clear_software_ll_bit();					\
 	(last) = resume(prev, next, task_thread_info(next));		\
 } while (0)
 
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index d52389672b0..3952b8323ef 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -36,9 +36,6 @@
 	.align	7
 	LEAF(resume)
 	.set arch=octeon
-#ifndef CONFIG_CPU_HAS_LLSC
-	sw	zero, ll_bit
-#endif
 	mfc0	t1, CP0_STATUS
 	LONG_S	t1, THREAD_STATUS(a0)
 	cpu_save_nonscratch a0
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 656bde2e11b..698414b7a25 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -46,9 +46,6 @@
  *                     struct thread_info *next_ti) )
  */
 LEAF(resume)
-#ifndef CONFIG_CPU_HAS_LLSC
-	sw      zero, ll_bit
-#endif
 	mfc0	t1, CP0_STATUS
 	sw	t1, THREAD_STATUS(a0)
 	cpu_save_nonscratch a0
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index d9bfae53c43..8893ee1a236 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -45,9 +45,6 @@
  */
 	.align	5
 	LEAF(resume)
-#ifndef CONFIG_CPU_HAS_LLSC
-	sw	zero, ll_bit
-#endif
 	mfc0	t1, CP0_STATUS
 	LONG_S	t1, THREAD_STATUS(a0)
 	cpu_save_nonscratch a0
-- 
cgit v1.2.3


From f1e39a4a616cd9981a9decfd5332fd07a01abb8b Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 17 Sep 2009 02:25:05 +0200
Subject: MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline
 assembler

This way it doesn't have to use CONFIG_CPU_HAS_LLSC anymore.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/system.h |   3 ++
 arch/mips/kernel/scall32-o32.S |  72 --------------------------
 arch/mips/kernel/scall64-64.S  |  72 --------------------------
 arch/mips/kernel/syscall.c     | 112 +++++++++++++++++++++++++++++++++++++++--
 arch/mips/kernel/traps.c       |   5 +-
 5 files changed, 114 insertions(+), 150 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
index a2e9239b45a..23f68b40d4b 100644
--- a/arch/mips/include/asm/system.h
+++ b/arch/mips/include/asm/system.h
@@ -32,6 +32,9 @@ extern asmlinkage void *resume(void *last, void *next, void *next_ti);
 
 struct task_struct;
 
+extern unsigned int ll_bit;
+extern struct task_struct *ll_task;
+
 #ifdef CONFIG_MIPS_MT_FPAFF
 
 /*
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index b5708212353..7c2de4f091c 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -187,78 +187,6 @@ illegal_syscall:
 	j	o32_syscall_exit
 	END(handle_sys)
 
-	LEAF(mips_atomic_set)
-	andi	v0, a1, 3			# must be word aligned
-	bnez	v0, bad_alignment
-
-	lw	v1, TI_ADDR_LIMIT($28)		# in legal address range?
-	addiu	a0, a1, 4
-	or	a0, a0, a1
-	and	a0, a0, v1
-	bltz	a0, bad_address
-
-#ifdef CONFIG_CPU_HAS_LLSC
-	/* Ok, this is the ll/sc case.  World is sane :-)  */
-1:	ll	v0, (a1)
-	move	a0, a2
-2:	sc	a0, (a1)
-#if R10000_LLSC_WAR
-	beqzl	a0, 1b
-#else
-	beqz	a0, 1b
-#endif
-
-	.section __ex_table,"a"
-	PTR	1b, bad_stack
-	PTR	2b, bad_stack
-	.previous
-#else
-	sw	a1, 16(sp)
-	sw	a2, 20(sp)
-
-	move	a0, sp
-	move	a2, a1
-	li	a1, 1
-	jal	do_page_fault
-
-	lw	a1, 16(sp)
-	lw	a2, 20(sp)
-
-	/*
-	 * At this point the page should be readable and writable unless
-	 * there was no more memory available.
-	 */
-1:	lw	v0, (a1)
-2:	sw	a2, (a1)
-
-	.section __ex_table,"a"
-	PTR	1b, no_mem
-	PTR	2b, no_mem
-	.previous
-#endif
-
-	sw	zero, PT_R7(sp)		# success
-	sw	v0, PT_R2(sp)		# result
-
-	j	o32_syscall_exit	# continue like a normal syscall
-
-no_mem:	li	v0, -ENOMEM
-	jr	ra
-
-bad_address:
-	li	v0, -EFAULT
-	jr	ra
-
-bad_alignment:
-	li	v0, -EINVAL
-	jr	ra
-	END(mips_atomic_set)
-
-	LEAF(sys_sysmips)
-	beq	a0, MIPS_ATOMIC_SET, mips_atomic_set
-	j	_sys_sysmips
-	END(sys_sysmips)
-
 	LEAF(sys_syscall)
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 3d866f24e06..b97b993846d 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -124,78 +124,6 @@ illegal_syscall:
 	j	n64_syscall_exit
 	END(handle_sys64)
 
-	LEAF(mips_atomic_set)
-	andi	v0, a1, 3			# must be word aligned
-	bnez	v0, bad_alignment
-
-	LONG_L	v1, TI_ADDR_LIMIT($28)		# in legal address range?
-	LONG_ADDIU	a0, a1, 4
-	or	a0, a0, a1
-	and	a0, a0, v1
-	bltz	a0, bad_address
-
-#ifdef CONFIG_CPU_HAS_LLSC
-	/* Ok, this is the ll/sc case.  World is sane :-)  */
-1:	ll	v0, (a1)
-	move	a0, a2
-2:	sc	a0, (a1)
-#if R10000_LLSC_WAR
-	beqzl	a0, 1b
-#else
-	beqz	a0, 1b
-#endif
-
-	.section __ex_table,"a"
-	PTR	1b, bad_stack
-	PTR	2b, bad_stack
-	.previous
-#else
-	sw	a1, 16(sp)
-	sw	a2, 20(sp)
-
-	move	a0, sp
-	move	a2, a1
-	li	a1, 1
-	jal	do_page_fault
-
-	lw	a1, 16(sp)
-	lw	a2, 20(sp)
-
-	/*
-	 * At this point the page should be readable and writable unless
-	 * there was no more memory available.
-	 */
-1:	lw	v0, (a1)
-2:	sw	a2, (a1)
-
-	.section __ex_table,"a"
-	PTR	1b, no_mem
-	PTR	2b, no_mem
-	.previous
-#endif
-
-	sd	zero, PT_R7(sp)		# success
-	sd	v0, PT_R2(sp)		# result
-
-	j	n64_syscall_exit	# continue like a normal syscall
-
-no_mem:	li	v0, -ENOMEM
-	jr	ra
-
-bad_address:
-	li	v0, -EFAULT
-	jr	ra
-
-bad_alignment:
-	li	v0, -EINVAL
-	jr	ra
-	END(mips_atomic_set)
-
-	LEAF(sys_sysmips)
-	beq	a0, MIPS_ATOMIC_SET, mips_atomic_set
-	j	_sys_sysmips
-	END(sys_sysmips)
-
 	.align	3
 sys_call_table:
 	PTR	sys_read			/* 5000 */
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 8cf38464404..3fe1fcfa2e7 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -28,7 +28,9 @@
 #include <linux/compiler.h>
 #include <linux/module.h>
 #include <linux/ipc.h>
+#include <linux/uaccess.h>
 
+#include <asm/asm.h>
 #include <asm/branch.h>
 #include <asm/cachectl.h>
 #include <asm/cacheflush.h>
@@ -290,12 +292,116 @@ SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
 	return 0;
 }
 
-asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3)
+static inline int mips_atomic_set(struct pt_regs *regs,
+	unsigned long addr, unsigned long new)
 {
+	unsigned long old, tmp;
+	unsigned int err;
+
+	if (unlikely(addr & 3))
+		return -EINVAL;
+
+	if (unlikely(!access_ok(VERIFY_WRITE, addr, 4)))
+		return -EINVAL;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__ (
+		"	li	%[err], 0				\n"
+		"1:	ll	%[old], (%[addr])			\n"
+		"	move	%[tmp], %[new]				\n"
+		"2:	sc	%[tmp], (%[addr])			\n"
+		"	beqzl	%[tmp], 1b				\n"
+		"3:							\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%[err], %[efault]			\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"STR(PTR)"	1b, 4b				\n"
+		"	"STR(PTR)"	2b, 4b				\n"
+		"	.previous					\n"
+		: [old] "=&r" (old),
+		  [err] "=&r" (err),
+		  [tmp] "=&r" (tmp)
+		: [addr] "r" (addr),
+		  [new] "r" (new),
+		  [efault] "i" (-EFAULT)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__ (
+		"	li	%[err], 0				\n"
+		"1:	ll	%[old], (%[addr])			\n"
+		"	move	%[tmp], %[new]				\n"
+		"2:	sc	%[tmp], (%[addr])			\n"
+		"	bnez	%[tmp], 4f				\n"
+		"3:							\n"
+		"	.subsection 2					\n"
+		"4:	b	1b					\n"
+		"	.previous					\n"
+		"							\n"
+		"	.section .fixup,\"ax\"				\n"
+		"5:	li	%[err], %[efault]			\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"STR(PTR)"	1b, 5b				\n"
+		"	"STR(PTR)"	2b, 5b				\n"
+		"	.previous					\n"
+		: [old] "=&r" (old),
+		  [err] "=&r" (err),
+		  [tmp] "=&r" (tmp)
+		: [addr] "r" (addr),
+		  [new] "r" (new),
+		  [efault] "i" (-EFAULT)
+		: "memory");
+	} else {
+		do {
+			preempt_disable();
+			ll_bit = 1;
+			ll_task = current;
+			preempt_enable();
+
+			err = __get_user(old, (unsigned int *) addr);
+			err |= __put_user(new, (unsigned int *) addr);
+			if (err)
+				break;
+			rmb();
+		} while (!ll_bit);
+	}
+
+	if (unlikely(err))
+		return err;
+
+	regs->regs[2] = old;
+	regs->regs[7] = 0;	/* No error */
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+	"	move	$29, %0						\n"
+	"	j	syscall_exit					\n"
+	: /* no outputs */
+	: "r" (regs));
+
+	/* unreached.  Honestly.  */
+	while (1);
+}
+
+save_static_function(sys_sysmips);
+static int __used noinline
+_sys_sysmips(nabi_no_regargs struct pt_regs regs)
+{
+	long cmd, arg1, arg2, arg3;
+
+	cmd = regs.regs[4];
+	arg1 = regs.regs[5];
+	arg2 = regs.regs[6];
+	arg3 = regs.regs[7];
+
 	switch (cmd) {
 	case MIPS_ATOMIC_SET:
-		printk(KERN_CRIT "How did I get here?\n");
-		return -EINVAL;
+		return mips_atomic_set(&regs, arg1, arg2);
 
 	case MIPS_FIXADE:
 		if (arg1 & ~3)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 08f1edf355e..0a18b4c62af 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -466,9 +466,8 @@ asmlinkage void do_be(struct pt_regs *regs)
  * The ll_bit is cleared by r*_switch.S
  */
 
-unsigned long ll_bit;
-
-static struct task_struct *ll_task = NULL;
+unsigned int ll_bit;
+struct task_struct *ll_task;
 
 static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode)
 {
-- 
cgit v1.2.3


From 43e6ae6d9f08304682294c14c6b7f2b2441668e7 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 17 Sep 2009 02:25:05 +0200
Subject: MIPS: Rewrite clearing of ll_bit on context switch in C

This also means there is now only one implementation not 3 left.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/system.h | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
index 23f68b40d4b..cc7262ff076 100644
--- a/arch/mips/include/asm/system.h
+++ b/arch/mips/include/asm/system.h
@@ -66,16 +66,11 @@ do {									\
 #define __mips_mt_fpaff_switch_to(prev) do { (void) (prev); } while (0)
 #endif
 
-#ifdef CONFIG_CPU_HAS_LLSC
-#define __clear_software_ll_bit() do { } while (0)
-#else
-extern unsigned long ll_bit;
-
 #define __clear_software_ll_bit()					\
 do {									\
-	ll_bit = 0;							\
+	if (!__builtin_constant_p(cpu_has_llsc) || !cpu_has_llsc)	\
+		ll_bit = 0;						\
 } while (0)
-#endif
 
 #define switch_to(prev, next, last)					\
 do {									\
-- 
cgit v1.2.3


From b8d6f78cd058e34ec706f7cb353fdb2eb743c050 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 17 Sep 2009 02:25:06 +0200
Subject: MIPS: Malta: Remove pointless use use of CONFIG_CPU_HAS_LLSC

All CPUs for Malta support LL/SC.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-malta/cpu-feature-overrides.h | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
index 7f3e3f9bd23..2848cea42bc 100644
--- a/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-malta/cpu-feature-overrides.h
@@ -28,11 +28,7 @@
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
-#ifdef CONFIG_CPU_HAS_LLSC
 #define cpu_has_llsc		1
-#else
-#define cpu_has_llsc		0
-#endif
 /* #define cpu_has_vtag_icache	? */
 /* #define cpu_has_dc_aliases	? */
 /* #define cpu_has_ic_fills_f_dc ? */
-- 
cgit v1.2.3


From f7ade3c168e4f437c11f57be012992bbb0e3075c Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 17 Sep 2009 02:25:06 +0200
Subject: MIPS: Get rid of CONFIG_CPU_HAS_LLSC

CONFIG_CPU_HAS_LLSC duplicated the function of cpu_has_llsc for no good
reason and and the results if the one was enabled and the other disabled
was very unobvious.  Remove it now that there are no more remaining users.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                          | 20 --------------------
 arch/mips/configs/ar7_defconfig            |  1 -
 arch/mips/configs/bcm47xx_defconfig        |  1 -
 arch/mips/configs/bigsur_defconfig         |  1 -
 arch/mips/configs/cobalt_defconfig         |  1 -
 arch/mips/configs/db1000_defconfig         |  1 -
 arch/mips/configs/db1100_defconfig         |  1 -
 arch/mips/configs/db1200_defconfig         |  1 -
 arch/mips/configs/db1500_defconfig         |  1 -
 arch/mips/configs/db1550_defconfig         |  1 -
 arch/mips/configs/excite_defconfig         |  1 -
 arch/mips/configs/ip22_defconfig           |  1 -
 arch/mips/configs/ip27_defconfig           |  1 -
 arch/mips/configs/ip28_defconfig           |  1 -
 arch/mips/configs/ip32_defconfig           |  1 -
 arch/mips/configs/jazz_defconfig           |  1 -
 arch/mips/configs/lasat_defconfig          |  1 -
 arch/mips/configs/malta_defconfig          |  1 -
 arch/mips/configs/markeins_defconfig       |  1 -
 arch/mips/configs/mipssim_defconfig        |  1 -
 arch/mips/configs/msp71xx_defconfig        |  1 -
 arch/mips/configs/mtx1_defconfig           |  1 -
 arch/mips/configs/pb1100_defconfig         |  1 -
 arch/mips/configs/pb1500_defconfig         |  1 -
 arch/mips/configs/pb1550_defconfig         |  1 -
 arch/mips/configs/pnx8335-stb225_defconfig |  1 -
 arch/mips/configs/pnx8550-jbs_defconfig    |  1 -
 arch/mips/configs/pnx8550-stb810_defconfig |  1 -
 arch/mips/configs/rb532_defconfig          |  1 -
 arch/mips/configs/rbtx49xx_defconfig       |  1 -
 arch/mips/configs/rm200_defconfig          |  1 -
 arch/mips/configs/sb1250-swarm_defconfig   |  1 -
 arch/mips/configs/wrppmc_defconfig         |  1 -
 arch/mips/configs/yosemite_defconfig       |  1 -
 34 files changed, 53 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 466920aa067..224e548f0fc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1041,7 +1041,6 @@ config CPU_LOONGSON2E
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1059,7 +1058,6 @@ config CPU_MIPS32_R1
 config CPU_MIPS32_R2
 	bool "MIPS32 Release 2"
 	depends on SYS_HAS_CPU_MIPS32_R2
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1073,7 +1071,6 @@ config CPU_MIPS32_R2
 config CPU_MIPS64_R1
 	bool "MIPS64 Release 1"
 	depends on SYS_HAS_CPU_MIPS64_R1
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1093,7 +1090,6 @@ config CPU_MIPS64_R1
 config CPU_MIPS64_R2
 	bool "MIPS64 Release 2"
 	depends on SYS_HAS_CPU_MIPS64_R2
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1139,7 +1135,6 @@ config CPU_VR41XX
 config CPU_R4300
 	bool "R4300"
 	depends on SYS_HAS_CPU_R4300
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1148,7 +1143,6 @@ config CPU_R4300
 config CPU_R4X00
 	bool "R4x00"
 	depends on SYS_HAS_CPU_R4X00
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1158,7 +1152,6 @@ config CPU_R4X00
 config CPU_TX49XX
 	bool "R49XX"
 	depends on SYS_HAS_CPU_TX49XX
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1166,7 +1159,6 @@ config CPU_TX49XX
 config CPU_R5000
 	bool "R5000"
 	depends on SYS_HAS_CPU_R5000
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1175,14 +1167,12 @@ config CPU_R5000
 config CPU_R5432
 	bool "R5432"
 	depends on SYS_HAS_CPU_R5432
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R5500
 	bool "R5500"
 	depends on SYS_HAS_CPU_R5500
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HUGEPAGES
@@ -1193,7 +1183,6 @@ config CPU_R5500
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
-	select CPU_HAS_LLSC
 	depends on SYS_HAS_CPU_R6000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
@@ -1203,7 +1192,6 @@ config CPU_R6000
 config CPU_NEVADA
 	bool "RM52xx"
 	depends on SYS_HAS_CPU_NEVADA
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1213,7 +1201,6 @@ config CPU_R8000
 	bool "R8000"
 	depends on EXPERIMENTAL
 	depends on SYS_HAS_CPU_R8000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1223,7 +1210,6 @@ config CPU_R8000
 config CPU_R10000
 	bool "R10000"
 	depends on SYS_HAS_CPU_R10000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1234,7 +1220,6 @@ config CPU_R10000
 config CPU_RM7000
 	bool "RM7000"
 	depends on SYS_HAS_CPU_RM7000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1243,7 +1228,6 @@ config CPU_RM7000
 config CPU_RM9000
 	bool "RM9000"
 	depends on SYS_HAS_CPU_RM9000
-	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1253,7 +1237,6 @@ config CPU_RM9000
 config CPU_SB1
 	bool "SB1"
 	depends on SYS_HAS_CPU_SB1
-	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1673,9 +1656,6 @@ config SB1_PASS_2_1_WORKAROUNDS
 config 64BIT_PHYS_ADDR
 	bool
 
-config CPU_HAS_LLSC
-	bool
-
 config CPU_HAS_SMARTMIPS
 	depends on SYS_SUPPORTS_SMARTMIPS
 	bool "Support for the SmartMIPS ASE"
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index dad5b6769d7..35648302f7c 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -125,7 +125,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index d8694332b34..94b7d57f906 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -111,7 +111,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index d6d35b2e5fe..13d9eb4736c 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -129,7 +129,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index eb44b72254a..6c8cca8589b 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -112,7 +112,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index a279165e3a7..dbdf3bb1a34 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 8944d15caf1..fa681447589 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index ab17973107f..d73f1de43b5 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index b65803f1935..ec3e028a5b2 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -116,7 +116,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index a190ac07740..7631dae51be 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 4e465e94599..1995d43a2ed 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -118,7 +118,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 11582287641..f14d38ba603 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -130,7 +130,6 @@ CONFIG_IP22_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 0208723adf2..1fc73aa7b50 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -105,7 +105,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index 70a744e9a8c..539dccb0345 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -123,7 +123,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index de4c7a0a96d..d934bdefb39 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -118,7 +118,6 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index bbacc35d804..d22df61833a 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -119,7 +119,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index bc9159fda72..044074db7e5 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -108,7 +108,6 @@ CONFIG_R5000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 1ecdd3b65dc..3f01870b4d6 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -139,7 +139,6 @@ CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_MIPS_MT_FPAFF=y
 # CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
 # CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_MIPSR2_IRQ_EI=y
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
index bad8901f8f3..d001f7e8741 100644
--- a/arch/mips/configs/markeins_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 2c0a6314e90..7358454deaa 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 # CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index 84d6491b3d4..ecbc030b7b6 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -129,7 +129,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index fadb351d249..9477f040796 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -116,7 +116,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 9e21e333a2f..be8091ef0a7 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index af67ed4f71a..e74ba794c78 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -114,7 +114,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 7956f56cbf3..1d896fd830d 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig
index 2728caa6c2f..fef4d31c205 100644
--- a/arch/mips/configs/pnx8335-stb225_defconfig
+++ b/arch/mips/configs/pnx8335-stb225_defconfig
@@ -112,7 +112,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 723bd5176a3..e10c7116c3c 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index b5052fb42e9..5ed3c8dfa0a 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -112,7 +112,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index f28dc32974e..f40c3a04739 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -113,7 +113,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 1efe977497d..c69813b8488 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -142,7 +142,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 0f4da0325ea..e53b8d096cf 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -124,7 +124,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index a9acaa2f9da..7f38c0b956f 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -133,7 +133,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_SB1_PASS_2_WORKAROUNDS=y
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index fc2c56731b9..06acc7482e4 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -120,7 +120,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index ea8249c75b3..69feaf88b51 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -115,7 +115,6 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-- 
cgit v1.2.3


From b791d1193af9772040e592d5aa161790f800b762 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Mon, 13 Jul 2009 11:15:19 -0700
Subject: MIPS: Allow kernel use of LL/SC to be separate from the presence of
 LL/SC.

On some CPUs, it is more efficient to disable and enable interrupts in the
kernel rather than use ll/sc for atomic operations.  But if we were to set
cpu_has_llsc to false, we would break the userspace futex interface (in
asm/futex.h).

We separate the two concepts, with a new predicate kernel_uses_llsc, that
lets us disable the kernel's use of ll/sc while still allowing the futex
code to use it.

Also there were a couple of cases in bitops.h where we were using ll/sc
unconditionally even if cpu_has_llsc were false.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/atomic.h       | 40 ++++++++++++++++++------------------
 arch/mips/include/asm/bitops.h       | 34 +++++++++++++++---------------
 arch/mips/include/asm/cmpxchg.h      |  4 ++--
 arch/mips/include/asm/cpu-features.h |  3 +++
 arch/mips/include/asm/local.h        |  8 ++++----
 arch/mips/include/asm/system.h       |  8 ++++----
 6 files changed, 50 insertions(+), 47 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index eb7f01cfd1a..dd75d673447 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -49,7 +49,7 @@
  */
 static __inline__ void atomic_add(int i, atomic_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -61,7 +61,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -94,7 +94,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
  */
 static __inline__ void atomic_sub(int i, atomic_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -106,7 +106,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -139,7 +139,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -153,7 +153,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -191,7 +191,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -205,7 +205,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -251,7 +251,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -269,7 +269,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		int temp;
 
 		__asm__ __volatile__(
@@ -428,7 +428,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
  */
 static __inline__ void atomic64_add(long i, atomic64_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -440,7 +440,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -473,7 +473,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
  */
 static __inline__ void atomic64_sub(long i, atomic64_t * v)
 {
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -485,7 +485,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		"	.set	mips0					\n"
 		: "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -518,7 +518,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -532,7 +532,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -570,7 +570,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -584,7 +584,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -630,7 +630,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
 
 		__asm__ __volatile__(
@@ -648,7 +648,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		long temp;
 
 		__asm__ __volatile__(
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index b1e9e97a9c7..84a383806b2 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -61,7 +61,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# set_bit	\n"
@@ -72,7 +72,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (1UL << bit), "m" (*m));
 #ifdef CONFIG_CPU_MIPSR2
-	} else if (__builtin_constant_p(bit)) {
+	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
 		__asm__ __volatile__(
 		"1:	" __LL "%0, %1			# set_bit	\n"
 		"	" __INS "%0, %4, %2, 1				\n"
@@ -84,7 +84,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (bit), "m" (*m), "r" (~0));
 #endif /* CONFIG_CPU_MIPSR2 */
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# set_bit	\n"
@@ -126,7 +126,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# clear_bit	\n"
@@ -137,7 +137,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (~(1UL << bit)), "m" (*m));
 #ifdef CONFIG_CPU_MIPSR2
-	} else if (__builtin_constant_p(bit)) {
+	} else if (kernel_uses_llsc && __builtin_constant_p(bit)) {
 		__asm__ __volatile__(
 		"1:	" __LL "%0, %1			# clear_bit	\n"
 		"	" __INS "%0, $0, %2, 1				\n"
@@ -149,7 +149,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (bit), "m" (*m));
 #endif /* CONFIG_CPU_MIPSR2 */
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	" __LL "%0, %1			# clear_bit	\n"
@@ -202,7 +202,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned short bit = nr & SZLONG_MASK;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -215,7 +215,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		"	.set	mips0				\n"
 		: "=&r" (temp), "=m" (*m)
 		: "ir" (1UL << bit), "m" (*m));
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -260,7 +260,7 @@ static inline int test_and_set_bit(unsigned long nr,
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -275,7 +275,7 @@ static inline int test_and_set_bit(unsigned long nr,
 		: "=&r" (temp), "=m" (*m), "=&r" (res)
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -328,7 +328,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -343,7 +343,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 		: "=&r" (temp), "=m" (*m), "=&r" (res)
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -397,7 +397,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -414,7 +414,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
 #ifdef CONFIG_CPU_MIPSR2
-	} else if (__builtin_constant_p(nr)) {
+	} else if (kernel_uses_llsc && __builtin_constant_p(nr)) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -431,7 +431,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		: "ir" (bit), "m" (*m)
 		: "memory");
 #endif
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -487,7 +487,7 @@ static inline int test_and_change_bit(unsigned long nr,
 
 	smp_llsc_mb();
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
@@ -502,7 +502,7 @@ static inline int test_and_change_bit(unsigned long nr,
 		: "=&r" (temp), "=m" (*m), "=&r" (res)
 		: "r" (1UL << bit), "m" (*m)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
 		unsigned long temp;
 
diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h
index 4a812c3ceb9..815a438a268 100644
--- a/arch/mips/include/asm/cmpxchg.h
+++ b/arch/mips/include/asm/cmpxchg.h
@@ -16,7 +16,7 @@
 ({									\
 	__typeof(*(m)) __ret;						\
 									\
-	if (cpu_has_llsc && R10000_LLSC_WAR) {				\
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {				\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
@@ -33,7 +33,7 @@
 		: "=&r" (__ret), "=R" (*m)				\
 		: "R" (*m), "Jr" (old), "Jr" (new)			\
 		: "memory");						\
-	} else if (cpu_has_llsc) {					\
+	} else if (kernel_uses_llsc) {					\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 8ab1d12ba7f..1f4df647c38 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -80,6 +80,9 @@
 #ifndef cpu_has_llsc
 #define cpu_has_llsc		(cpu_data[0].options & MIPS_CPU_LLSC)
 #endif
+#ifndef kernel_uses_llsc
+#define kernel_uses_llsc	cpu_has_llsc
+#endif
 #ifndef cpu_has_mips16
 #define cpu_has_mips16		(cpu_data[0].ases & MIPS_ASE_MIPS16)
 #endif
diff --git a/arch/mips/include/asm/local.h b/arch/mips/include/asm/local.h
index f96fd59e084..361f4f16c30 100644
--- a/arch/mips/include/asm/local.h
+++ b/arch/mips/include/asm/local.h
@@ -29,7 +29,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 {
 	unsigned long result;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
@@ -43,7 +43,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
 		: "Ir" (i), "m" (l->a.counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
@@ -74,7 +74,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 {
 	unsigned long result;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
@@ -88,7 +88,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 		: "=&r" (result), "=&r" (temp), "=m" (l->a.counter)
 		: "Ir" (i), "m" (l->a.counter)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long temp;
 
 		__asm__ __volatile__(
diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
index cc7262ff076..fcf5f98d90c 100644
--- a/arch/mips/include/asm/system.h
+++ b/arch/mips/include/asm/system.h
@@ -94,7 +94,7 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 {
 	__u32 retval;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
@@ -109,7 +109,7 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
@@ -146,7 +146,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 {
 	__u64 retval;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
@@ -159,7 +159,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 		: "=&r" (retval), "=m" (*m), "=&r" (dummy)
 		: "R" (*m), "Jr" (val)
 		: "memory");
-	} else if (cpu_has_llsc) {
+	} else if (kernel_uses_llsc) {
 		unsigned long dummy;
 
 		__asm__ __volatile__(
-- 
cgit v1.2.3


From 9d24bafb0d1ecf636f71a56f9d6f071f5c7a882d Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Mon, 13 Jul 2009 11:15:20 -0700
Subject: MIPS: Octeon: Set kernel_uses_llsc to false on non-SMP builds.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 .../include/asm/mach-cavium-octeon/cpu-feature-overrides.h   | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index 3d830756b13..425e708d4fb 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -31,12 +31,16 @@
 #define cpu_has_cache_cdex_s	0
 #define cpu_has_prefetch	1
 
+#define cpu_has_llsc		1
 /*
- * We should disable LL/SC on non SMP systems as it is faster to
- * disable interrupts for atomic access than a LL/SC.  Unfortunatly we
- * cannot as this breaks asm/futex.h
+ * We Disable LL/SC on non SMP systems as it is faster to disable
+ * interrupts for atomic access than a LL/SC.
  */
-#define cpu_has_llsc		1
+#ifdef CONFIG_SMP
+# define kernel_uses_llsc	1
+#else
+# define kernel_uses_llsc	0
+#endif
 #define cpu_has_vtag_icache	1
 #define cpu_has_dc_aliases	0
 #define cpu_has_ic_fills_f_dc	0
-- 
cgit v1.2.3


From 2882b0c63ac6085fd5c18959240b6f7d6ffb8d5b Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Sat, 22 Aug 2009 18:09:27 +0200
Subject: MIPS: Alchemy: get rid of allow_au1k_wait

Eliminate the 'allow_au1k_wait' variable.  MIPS kernel installs the
Alchemy-specific wait code before timer initialization;  if the C0
timer must be used for timekeeping the wait function is set to NULL
which means no wait implementation is available.

As a sideeffect, the 'wait instruction available' output in
/proc/cpuinfo now correctly indicates whether 'wait' is usable.

Run-tested on DB1200.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/time.c | 15 +++++++++------
 arch/mips/kernel/cpu-probe.c    | 13 +++++--------
 2 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 33fbae79af5..f34ff860194 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -36,14 +36,13 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 
+#include <asm/processor.h>
 #include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>
 
 /* 32kHz clock enabled and detected */
 #define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
 
-extern int allow_au1k_wait; /* default off for CP0 Counter */
-
 static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
@@ -153,13 +152,17 @@ void __init plat_time_init(void)
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 
-	/* can now use 'wait' */
-	allow_au1k_wait = 1;
 	return;
 
 cntr_err:
-	/* counters unusable, use C0 counter */
+	/*
+	 * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
+	 * function is called.  Because the Alchemy counters are unusable
+	 * the C0 timekeeping code is installed and use of the 'wait'
+	 * instruction must be prohibited, which is done most easily by
+	 * assigning NULL to cpu_wait.
+	 */
+	cpu_wait = NULL;
 	r4k_clockevent_init();
 	init_r4k_clocksource();
-	allow_au1k_wait = 0;
 }
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 1abe9905c9c..6e4807a19c0 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -91,16 +91,13 @@ static void rm7k_wait_irqoff(void)
 	local_irq_enable();
 }
 
-/* The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter. */
-int allow_au1k_wait;
-
+/*
+ * The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter.
+ * alchemy/common/time.c may override cpu_wait!
+ */
 static void au1k_wait(void)
 {
-	if (!allow_au1k_wait)
-		return;
-
-	/* using the wait instruction makes CP0 counter unusable */
 	__asm__("	.set	mips3			\n"
 		"	cache	0x14, 0(%0)		\n"
 		"	cache	0x14, 32(%0)		\n"
-- 
cgit v1.2.3


From 982f6ffeeed5ef6104cfd72e517ff9e7a9270fda Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 17 Sep 2009 02:25:07 +0200
Subject: MIPS: Remove useless zero initializations.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/boot/elf2ecoff.c           |  4 ++--
 arch/mips/dec/prom/memory.c          |  2 +-
 arch/mips/emma/markeins/setup.c      |  2 +-
 arch/mips/fw/cfe/cfe_api.c           |  4 ++--
 arch/mips/kernel/cpu-bugs64.c        |  2 +-
 arch/mips/kernel/cpu-probe.c         |  4 ++--
 arch/mips/kernel/kspd.c              |  6 +++---
 arch/mips/kernel/mips-mt-fpaff.c     |  2 +-
 arch/mips/kernel/mips-mt.c           | 10 +++++-----
 arch/mips/kernel/rtlx.c              |  2 +-
 arch/mips/kernel/setup.c             |  2 +-
 arch/mips/kernel/smtc.c              | 10 +++++-----
 arch/mips/kernel/vpe.c               |  2 +-
 arch/mips/mipssim/sim_setup.c        |  2 +-
 arch/mips/mm/tlb-r4k.c               |  2 +-
 arch/mips/mti-malta/malta-init.c     |  2 +-
 arch/mips/nxp/pnx833x/stb22x/board.c |  2 +-
 arch/mips/nxp/pnx8550/common/proc.c  |  6 +++---
 arch/mips/pci/pci-bcm1480.c          |  2 +-
 arch/mips/pci/pci-bcm1480ht.c        |  2 +-
 arch/mips/pci/pci-sb1250.c           |  2 +-
 arch/mips/pci/pci.c                  |  4 ++--
 22 files changed, 38 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c
index c5a7f308c40..e19d906236a 100644
--- a/arch/mips/boot/elf2ecoff.c
+++ b/arch/mips/boot/elf2ecoff.c
@@ -59,8 +59,8 @@ struct sect {
 };
 
 int *symTypeTable;
-int must_convert_endian = 0;
-int format_bigendian = 0;
+int must_convert_endian;
+int format_bigendian;
 
 static void copy(int out, int in, off_t offset, off_t size)
 {
diff --git a/arch/mips/dec/prom/memory.c b/arch/mips/dec/prom/memory.c
index 5a557e268f7..e95ff3054ff 100644
--- a/arch/mips/dec/prom/memory.c
+++ b/arch/mips/dec/prom/memory.c
@@ -18,7 +18,7 @@
 #include <asm/sections.h>
 
 
-volatile unsigned long mem_err = 0;	/* So we know an error occurred */
+volatile unsigned long mem_err;		/* So we know an error occurred */
 
 /*
  * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
index 335dc8c1a1b..9b3f51e5f14 100644
--- a/arch/mips/emma/markeins/setup.c
+++ b/arch/mips/emma/markeins/setup.c
@@ -32,7 +32,7 @@
 
 extern void markeins_led(const char *);
 
-static int bus_frequency = 0;
+static int bus_frequency;
 
 static void markeins_machine_restart(char *command)
 {
diff --git a/arch/mips/fw/cfe/cfe_api.c b/arch/mips/fw/cfe/cfe_api.c
index 717db74f7c6..d06dc5a6b8d 100644
--- a/arch/mips/fw/cfe/cfe_api.c
+++ b/arch/mips/fw/cfe/cfe_api.c
@@ -45,8 +45,8 @@ int cfe_iocb_dispatch(struct cfe_xiocb *xiocb);
  * passed in two registers each, and CFE expects one.
  */
 
-static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb) = 0;
-static u64 cfe_handle = 0;
+static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb);
+static u64 cfe_handle;
 
 int cfe_init(u64 handle, u64 ept)
 {
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 02b7713cf71..408d0a07b3a 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -167,7 +167,7 @@ static inline void check_mult_sh(void)
 	panic(bug64hit, !R4000_WAR ? r4kwar : nowar);
 }
 
-static volatile int daddi_ov __cpuinitdata = 0;
+static volatile int daddi_ov __cpuinitdata;
 
 asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
 {
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 6e4807a19c0..4579d5c12da 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -31,7 +31,7 @@
  * The wait instruction stops the pipeline and reduces the power consumption of
  * the CPU very much.
  */
-void (*cpu_wait)(void) = NULL;
+void (*cpu_wait)(void);
 
 static void r3081_wait(void)
 {
@@ -112,7 +112,7 @@ static void au1k_wait(void)
 		: : "r" (au1k_wait));
 }
 
-static int __initdata nowait = 0;
+static int __initdata nowait;
 
 static int __init wait_disable(char *s)
 {
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index fd6e5122403..f2397f00db4 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -31,7 +31,7 @@
 #include <asm/rtlx.h>
 #include <asm/kspd.h>
 
-static struct workqueue_struct *workqueue = NULL;
+static struct workqueue_struct *workqueue;
 static struct work_struct work;
 
 extern unsigned long cpu_khz;
@@ -58,7 +58,7 @@ struct mtsp_syscall_generic {
 };
 
 static struct list_head kspd_notifylist;
-static int sp_stopping = 0;
+static int sp_stopping;
 
 /* these should match with those in the SDE kit */
 #define MTSP_SYSCALL_BASE	0
@@ -328,7 +328,7 @@ static void sp_cleanup(void)
 	sys_chdir("/");
 }
 
-static int channel_open = 0;
+static int channel_open;
 
 /* the work handler */
 static void sp_work(struct work_struct *unused)
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index 42461310b18..cbc6182b006 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -18,7 +18,7 @@
 cpumask_t mt_fpu_cpumask;
 
 static int fpaff_threshold = -1;
-unsigned long mt_fpemul_threshold = 0;
+unsigned long mt_fpemul_threshold;
 
 /*
  * Replacement functions for the sys_sched_setaffinity() and
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index d01665a453f..b2259e7cd82 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -125,10 +125,10 @@ void mips_mt_regdump(unsigned long mvpctl)
 	local_irq_restore(flags);
 }
 
-static int mt_opt_norps = 0;
+static int mt_opt_norps;
 static int mt_opt_rpsctl = -1;
 static int mt_opt_nblsu = -1;
-static int mt_opt_forceconfig7 = 0;
+static int mt_opt_forceconfig7;
 static int mt_opt_config7 = -1;
 
 static int __init rps_disable(char *s)
@@ -161,8 +161,8 @@ static int __init config7_set(char *str)
 __setup("config7=", config7_set);
 
 /* Experimental cache flush control parameters that should go away some day */
-int mt_protiflush = 0;
-int mt_protdflush = 0;
+int mt_protiflush;
+int mt_protdflush;
 int mt_n_iflushes = 1;
 int mt_n_dflushes = 1;
 
@@ -194,7 +194,7 @@ static int __init ndflush(char *s)
 }
 __setup("ndflush=", ndflush);
 
-static unsigned int itc_base = 0;
+static unsigned int itc_base;
 
 static int __init set_itc_base(char *str)
 {
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 4ce93aa7b37..a10ebfdc28a 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -57,7 +57,7 @@ static struct chan_waitqueues {
 } channel_wqs[RTLX_CHANNELS];
 
 static struct vpe_notifications notify;
-static int sp_stopping = 0;
+static int sp_stopping;
 
 extern void *vpe_get_shared(int index);
 
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 2950b97253b..2b290d70083 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -441,7 +441,7 @@ static void __init bootmem_init(void)
  * initialization hook for anything else was introduced.
  */
 
-static int usermem __initdata = 0;
+static int usermem __initdata;
 
 static int __init early_parse_mem(char *p)
 {
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index c16bb6d6c25..1a466baf0ed 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -95,14 +95,14 @@ void init_smtc_stats(void);
 
 /* Global SMTC Status */
 
-unsigned int smtc_status = 0;
+unsigned int smtc_status;
 
 /* Boot command line configuration overrides */
 
 static int vpe0limit;
-static int ipibuffers = 0;
-static int nostlb = 0;
-static int asidmask = 0;
+static int ipibuffers;
+static int nostlb;
+static int asidmask;
 unsigned long smtc_asid_mask = 0xff;
 
 static int __init vpe0tcs(char *str)
@@ -151,7 +151,7 @@ __setup("asidmask=", asidmask_set);
 
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 
-static int hang_trig = 0;
+static int hang_trig;
 
 static int __init hangtrig_enable(char *s)
 {
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 9a1ab7e87fd..eb6c4c5b7fb 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -74,7 +74,7 @@ static const int minor = 1;	/* fixed for now  */
 
 #ifdef CONFIG_MIPS_APSP_KSPD
 static struct kspd_notifications kspd_events;
-static int kspd_events_reqd = 0;
+static int kspd_events_reqd;
 #endif
 
 /* grab the likely amount of memory we will need. */
diff --git a/arch/mips/mipssim/sim_setup.c b/arch/mips/mipssim/sim_setup.c
index 7c7148ef264..2877675c5f0 100644
--- a/arch/mips/mipssim/sim_setup.c
+++ b/arch/mips/mipssim/sim_setup.c
@@ -37,7 +37,7 @@
 
 
 static void __init serial_init(void);
-unsigned int _isbonito = 0;
+unsigned int _isbonito;
 
 const char *get_system_type(void)
 {
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index cee502caf39..d73428b18b0 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -475,7 +475,7 @@ static void __cpuinit probe_tlb(unsigned long config)
 	c->tlbsize = ((reg >> 25) & 0x3f) + 1;
 }
 
-static int __cpuinitdata ntlb = 0;
+static int __cpuinitdata ntlb;
 static int __init set_ntlb(char *str)
 {
 	get_option(&str, &ntlb);
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 27c807b67fe..f1b14c8a4a1 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -47,7 +47,7 @@ int *_prom_argv, *_prom_envp;
  */
 #define prom_envp(index) ((char *)(long)_prom_envp[(index)])
 
-int init_debug = 0;
+int init_debug;
 
 static int mips_revision_corid;
 int mips_revision_sconid;
diff --git a/arch/mips/nxp/pnx833x/stb22x/board.c b/arch/mips/nxp/pnx833x/stb22x/board.c
index 90cc604bdad..644eb7c3210 100644
--- a/arch/mips/nxp/pnx833x/stb22x/board.c
+++ b/arch/mips/nxp/pnx833x/stb22x/board.c
@@ -39,7 +39,7 @@
 #define PNX8335_DEBUG7 0x441c
 
 int prom_argc;
-char **prom_argv = 0, **prom_envp = 0;
+char **prom_argv, **prom_envp;
 
 extern void prom_init_cmdline(void);
 extern char *prom_getenv(char *envname);
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index acf1fa88944..af094cd1d85 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -69,9 +69,9 @@ static int pnx8550_registers_read(char* page, char** start, off_t offset, int co
         return len;
 }
 
-static struct proc_dir_entry* pnx8550_dir        = NULL;
-static struct proc_dir_entry* pnx8550_timers     = NULL;
-static struct proc_dir_entry* pnx8550_registers  = NULL;
+static struct proc_dir_entry* pnx8550_dir;
+static struct proc_dir_entry* pnx8550_timers;
+static struct proc_dir_entry* pnx8550_registers;
 
 static int pnx8550_proc_init( void )
 {
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index a9060c77184..6f5e24c6ae6 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -57,7 +57,7 @@ static void *cfg_space;
 #define PCI_BUS_ENABLED	1
 #define PCI_DEVICE_MODE	2
 
-static int bcm1480_bus_status = 0;
+static int bcm1480_bus_status;
 
 #define PCI_BRIDGE_DEVICE  0
 
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index f54f45412b0..50cc6e9e824 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -56,7 +56,7 @@ static void *ht_cfg_space;
 #define PCI_BUS_ENABLED	1
 #define PCI_DEVICE_MODE	2
 
-static int bcm1480ht_bus_status = 0;
+static int bcm1480ht_bus_status;
 
 #define PCI_BRIDGE_DEVICE  0
 #define HT_BRIDGE_DEVICE   1
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index bf639590b8b..ada24e6f951 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -58,7 +58,7 @@ static void *cfg_space;
 #define LDT_BUS_ENABLED	2
 #define PCI_DEVICE_MODE	4
 
-static int sb1250_bus_status = 0;
+static int sb1250_bus_status;
 
 #define PCI_BRIDGE_DEVICE  0
 #define LDT_BRIDGE_DEVICE  1
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index b0eb9e75c68..9a11c222689 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -31,8 +31,8 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
 
 static struct pci_controller *hose_head, **hose_tail = &hose_head;
 
-unsigned long PCIBIOS_MIN_IO	= 0x0000;
-unsigned long PCIBIOS_MIN_MEM	= 0;
+unsigned long PCIBIOS_MIN_IO;
+unsigned long PCIBIOS_MIN_MEM;
 
 static int pci_initialized;
 
-- 
cgit v1.2.3


From e26449153c386904d2801d6348d66d00e5ba2211 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 20 Aug 2009 14:10:22 -0700
Subject: MIPS: Octeon:  Add hardware RNG platform device.

Add a platform device for the Octeon Random Number Generator (RNG).

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/setup.c              | 43 ++++++++++++++
 arch/mips/include/asm/octeon/cvmx-rnm-defs.h | 88 ++++++++++++++++++++++++++++
 2 files changed, 131 insertions(+)
 create mode 100644 arch/mips/include/asm/octeon/cvmx-rnm-defs.h

(limited to 'arch')

diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index da559249cc2..468a1209833 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -33,6 +33,7 @@
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-rnm-defs.h>
 
 #ifdef CONFIG_CAVIUM_DECODE_RSL
 extern void cvmx_interrupt_rsl_decode(void);
@@ -926,3 +927,45 @@ out:
 	return ret;
 }
 device_initcall(octeon_cf_device_init);
+
+/* Octeon Random Number Generator.  */
+static int __init octeon_rng_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+
+	struct resource rng_resources[] = {
+		{
+			.flags	= IORESOURCE_MEM,
+			.start	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS),
+			.end	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf
+		}, {
+			.flags	= IORESOURCE_MEM,
+			.start	= cvmx_build_io_address(8, 0),
+			.end	= cvmx_build_io_address(8, 0) + 0x7
+		}
+	};
+
+	pd = platform_device_alloc("octeon_rng", -1);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = platform_device_add_resources(pd, rng_resources,
+					    ARRAY_SIZE(rng_resources));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+
+out:
+	return ret;
+}
+device_initcall(octeon_rng_device_init);
diff --git a/arch/mips/include/asm/octeon/cvmx-rnm-defs.h b/arch/mips/include/asm/octeon/cvmx-rnm-defs.h
new file mode 100644
index 00000000000..4586958c97b
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-rnm-defs.h
@@ -0,0 +1,88 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_RNM_DEFS_H__
+#define __CVMX_RNM_DEFS_H__
+
+#include <linux/types.h>
+
+#define CVMX_RNM_BIST_STATUS \
+	 CVMX_ADD_IO_SEG(0x0001180040000008ull)
+#define CVMX_RNM_CTL_STATUS \
+	 CVMX_ADD_IO_SEG(0x0001180040000000ull)
+
+union cvmx_rnm_bist_status {
+	uint64_t u64;
+	struct cvmx_rnm_bist_status_s {
+		uint64_t reserved_2_63:62;
+		uint64_t rrc:1;
+		uint64_t mem:1;
+	} s;
+	struct cvmx_rnm_bist_status_s cn30xx;
+	struct cvmx_rnm_bist_status_s cn31xx;
+	struct cvmx_rnm_bist_status_s cn38xx;
+	struct cvmx_rnm_bist_status_s cn38xxp2;
+	struct cvmx_rnm_bist_status_s cn50xx;
+	struct cvmx_rnm_bist_status_s cn52xx;
+	struct cvmx_rnm_bist_status_s cn52xxp1;
+	struct cvmx_rnm_bist_status_s cn56xx;
+	struct cvmx_rnm_bist_status_s cn56xxp1;
+	struct cvmx_rnm_bist_status_s cn58xx;
+	struct cvmx_rnm_bist_status_s cn58xxp1;
+};
+
+union cvmx_rnm_ctl_status {
+	uint64_t u64;
+	struct cvmx_rnm_ctl_status_s {
+		uint64_t reserved_9_63:55;
+		uint64_t ent_sel:4;
+		uint64_t exp_ent:1;
+		uint64_t rng_rst:1;
+		uint64_t rnm_rst:1;
+		uint64_t rng_en:1;
+		uint64_t ent_en:1;
+	} s;
+	struct cvmx_rnm_ctl_status_cn30xx {
+		uint64_t reserved_4_63:60;
+		uint64_t rng_rst:1;
+		uint64_t rnm_rst:1;
+		uint64_t rng_en:1;
+		uint64_t ent_en:1;
+	} cn30xx;
+	struct cvmx_rnm_ctl_status_cn30xx cn31xx;
+	struct cvmx_rnm_ctl_status_cn30xx cn38xx;
+	struct cvmx_rnm_ctl_status_cn30xx cn38xxp2;
+	struct cvmx_rnm_ctl_status_s cn50xx;
+	struct cvmx_rnm_ctl_status_s cn52xx;
+	struct cvmx_rnm_ctl_status_s cn52xxp1;
+	struct cvmx_rnm_ctl_status_s cn56xx;
+	struct cvmx_rnm_ctl_status_s cn56xxp1;
+	struct cvmx_rnm_ctl_status_s cn58xx;
+	struct cvmx_rnm_ctl_status_s cn58xxp1;
+};
+
+#endif
-- 
cgit v1.2.3


From a7bcb1ae6094db78b077ae17e92c69de7643014f Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Thu, 27 Aug 2009 19:21:18 +0200
Subject: MIPS: Alchemy: override loops_per_jiffy detection

loops_per_jiffy depends on coreclk speed;  preset it instead of
letting the kernel waste precious microseconds trying to approximate it.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/setup.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 3f036b3d400..6184baa5678 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -27,6 +27,7 @@
 
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/jiffies.h>
 #include <linux/module.h>
 #include <linux/pm.h>
 
@@ -53,6 +54,9 @@ void __init plat_mem_setup(void)
 	printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
 	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
 
+	/* this is faster than wasting cycles trying to approximate it */
+	preset_lpj = (est_freq >> 1) / HZ;
+
 	_machine_restart = au1000_restart;
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
-- 
cgit v1.2.3


From e0cc87f59490d7d62a8ab2a76498dc8a2b64927a Mon Sep 17 00:00:00 2001
From: Wu Fei <at.wufei@gmail.com>
Date: Thu, 3 Sep 2009 22:29:53 +0800
Subject: MIPS: Shrink the size of tlb handler

By combining swapper_pg_dir and module_pg_dir, several if conditions
can be eliminated from the tlb exception handler. The reason they
can be combined is that, the effective virtual address of vmalloc
returned is at the bottom, and of module_alloc returned is at the
top. It also fixes the bug in vmalloc(), which happens when its
return address is not covered by the first pgd.

Signed-off-by: Wu Fei <at.wufei@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/pgtable-64.h | 11 +++------
 arch/mips/mm/init.c                |  3 ---
 arch/mips/mm/pgtable-64.c          |  3 ---
 arch/mips/mm/tlbex.c               | 49 --------------------------------------
 4 files changed, 3 insertions(+), 63 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 4ed9d1bba2b..9cd50899395 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -109,13 +109,13 @@
 
 #define VMALLOC_START		MAP_BASE
 #define VMALLOC_END	\
-	(VMALLOC_START + PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE)
+	(VMALLOC_START + \
+	 PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE - (1UL << 32))
 #if defined(CONFIG_MODULES) && defined(KBUILD_64BIT_SYM32) && \
 	VMALLOC_START != CKSSEG
 /* Load modules into 32bit-compatible segment. */
 #define MODULE_START	CKSSEG
 #define MODULE_END	(FIXADDR_START-2*PAGE_SIZE)
-extern pgd_t module_pg_dir[PTRS_PER_PGD];
 #endif
 
 #define pte_ERROR(e) \
@@ -188,12 +188,7 @@ static inline void pud_clear(pud_t *pudp)
 #define __pmd_offset(address)	pmd_index(address)
 
 /* to find an entry in a kernel page-table-directory */
-#ifdef MODULE_START
-#define pgd_offset_k(address) \
-	((address) >= MODULE_START ? module_pg_dir : pgd_offset(&init_mm, 0UL))
-#else
-#define pgd_offset_k(address) pgd_offset(&init_mm, 0UL)
-#endif
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
 #define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
 #define pmd_index(address)	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 0e820508ff2..38c79c55b06 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -475,9 +475,6 @@ unsigned long pgd_current[NR_CPUS];
  */
 pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER);
 #ifdef CONFIG_64BIT
-#ifdef MODULE_START
-pgd_t module_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER);
-#endif
 pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned(PMD_ORDER);
 #endif
 pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index e4b565aeb00..1121019fa45 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -59,9 +59,6 @@ void __init pagetable_init(void)
 
 	/* Initialize the entire pgd.  */
 	pgd_init((unsigned long)swapper_pg_dir);
-#ifdef MODULE_START
-	pgd_init((unsigned long)module_pg_dir);
-#endif
 	pmd_init((unsigned long)invalid_pmd_table, (unsigned long)invalid_pte_table);
 
 	pgd_base = swapper_pg_dir;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 9a17bf8395d..bc66f57f325 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -499,11 +499,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
-#ifdef MODULE_START
-	uasm_il_bltz(p, r, tmp, label_module_alloc);
-#else
 	uasm_il_bltz(p, r, tmp, label_vmalloc);
-#endif
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_SMP
@@ -556,52 +552,7 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 {
 	long swpd = (long)swapper_pg_dir;
 
-#ifdef MODULE_START
-	long modd = (long)module_pg_dir;
-
-	uasm_l_module_alloc(l, *p);
-	/*
-	 * Assumption:
-	 * VMALLOC_START >= 0xc000000000000000UL
-	 * MODULE_START >= 0xe000000000000000UL
-	 */
-	UASM_i_SLL(p, ptr, bvaddr, 2);
-	uasm_il_bgez(p, r, ptr, label_vmalloc);
-
-	if (uasm_in_compat_space_p(MODULE_START) &&
-	    !uasm_rel_lo(MODULE_START)) {
-		uasm_i_lui(p, ptr, uasm_rel_hi(MODULE_START)); /* delay slot */
-	} else {
-		/* unlikely configuration */
-		uasm_i_nop(p); /* delay slot */
-		UASM_i_LA(p, ptr, MODULE_START);
-	}
-	uasm_i_dsubu(p, bvaddr, bvaddr, ptr);
-
-	if (uasm_in_compat_space_p(modd) && !uasm_rel_lo(modd)) {
-		uasm_il_b(p, r, label_vmalloc_done);
-		uasm_i_lui(p, ptr, uasm_rel_hi(modd));
-	} else {
-		UASM_i_LA_mostly(p, ptr, modd);
-		uasm_il_b(p, r, label_vmalloc_done);
-		if (uasm_in_compat_space_p(modd))
-			uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(modd));
-		else
-			uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(modd));
-	}
-
 	uasm_l_vmalloc(l, *p);
-	if (uasm_in_compat_space_p(MODULE_START) &&
-	    !uasm_rel_lo(MODULE_START) &&
-	    MODULE_START << 32 == VMALLOC_START)
-		uasm_i_dsll32(p, ptr, ptr, 0);	/* typical case */
-	else
-		UASM_i_LA(p, ptr, VMALLOC_START);
-#else
-	uasm_l_vmalloc(l, *p);
-	UASM_i_LA(p, ptr, VMALLOC_START);
-#endif
-	uasm_i_dsubu(p, bvaddr, bvaddr, ptr);
 
 	if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
 		uasm_il_b(p, r, label_vmalloc_done);
-- 
cgit v1.2.3


From 2ca2ebfd952d0338a0972c1f1f56b9b0c1a3b09c Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Wed, 2 Sep 2009 15:47:34 -0700
Subject: MIPS: Don't corrupt page tables on vmalloc fault.

The code after the vmalloc_fault: label in do_page_fault() modifies
user page tables, this is not correct for 64-bit kernels.

For 64-bit kernels we should go straight to the no_context handler
skipping vmalloc_fault.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/fault.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index f956ecbb813..e97a7a2fb2c 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -58,11 +58,17 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
+#ifdef CONFIG_64BIT
+# define VMALLOC_FAULT_TARGET no_context
+#else
+# define VMALLOC_FAULT_TARGET vmalloc_fault
+#endif
+
 	if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END))
-		goto vmalloc_fault;
+		goto VMALLOC_FAULT_TARGET;
 #ifdef MODULE_START
 	if (unlikely(address >= MODULE_START && address < MODULE_END))
-		goto vmalloc_fault;
+		goto VMALLOC_FAULT_TARGET;
 #endif
 
 	/*
@@ -203,6 +209,7 @@ do_sigbus:
 	force_sig_info(SIGBUS, &info, tsk);
 
 	return;
+#ifndef CONFIG_64BIT
 vmalloc_fault:
 	{
 		/*
@@ -241,4 +248,5 @@ vmalloc_fault:
 			goto no_context;
 		return;
 	}
+#endif
 }
-- 
cgit v1.2.3


From 512254ba8383c5dd7eca6819d0da1ce2fe9ede47 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Wed, 16 Sep 2009 14:54:18 -0700
Subject: MIPS: Octeon:  Move some platform device registration to its own
 file.

There is a bunch of platform device registration in
arch/mips/cavium-octeon/setup.c.  We move it to its own file in
preparation for adding more platform devices.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/Makefile          |   4 +-
 arch/mips/cavium-octeon/octeon-platform.c | 164 ++++++++++++++++++++++++++++++
 arch/mips/cavium-octeon/setup.c           | 146 --------------------------
 3 files changed, 166 insertions(+), 148 deletions(-)
 create mode 100644 arch/mips/cavium-octeon/octeon-platform.c

(limited to 'arch')

diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index d6903c3f3d5..13943628052 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -6,10 +6,10 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 #
-# Copyright (C) 2005-2008 Cavium Networks
+# Copyright (C) 2005-2009 Cavium Networks
 #
 
-obj-y := setup.o serial.o octeon-irq.o csrc-octeon.o
+obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
 obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
new file mode 100644
index 00000000000..be711dd2d91
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -0,0 +1,164 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2009 Cavium Networks
+ * Copyright (C) 2008 Wind River Systems
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-rnm-defs.h>
+
+static struct octeon_cf_data octeon_cf_data;
+
+static int __init octeon_cf_device_init(void)
+{
+	union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
+	unsigned long base_ptr, region_base, region_size;
+	struct platform_device *pd;
+	struct resource cf_resources[3];
+	unsigned int num_resources;
+	int i;
+	int ret = 0;
+
+	/* Setup octeon-cf platform device if present. */
+	base_ptr = 0;
+	if (octeon_bootinfo->major_version == 1
+		&& octeon_bootinfo->minor_version >= 1) {
+		if (octeon_bootinfo->compact_flash_common_base_addr)
+			base_ptr =
+				octeon_bootinfo->compact_flash_common_base_addr;
+	} else {
+		base_ptr = 0x1d000800;
+	}
+
+	if (!base_ptr)
+		return ret;
+
+	/* Find CS0 region. */
+	for (i = 0; i < 8; i++) {
+		mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i));
+		region_base = mio_boot_reg_cfg.s.base << 16;
+		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+		if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
+		    && base_ptr < region_base + region_size)
+			break;
+	}
+	if (i >= 7) {
+		/* i and i + 1 are CS0 and CS1, both must be less than 8. */
+		goto out;
+	}
+	octeon_cf_data.base_region = i;
+	octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width;
+	octeon_cf_data.base_region_bias = base_ptr - region_base;
+	memset(cf_resources, 0, sizeof(cf_resources));
+	num_resources = 0;
+	cf_resources[num_resources].flags	= IORESOURCE_MEM;
+	cf_resources[num_resources].start	= region_base;
+	cf_resources[num_resources].end	= region_base + region_size - 1;
+	num_resources++;
+
+
+	if (!(base_ptr & 0xfffful)) {
+		/*
+		 * Boot loader signals availability of DMA (true_ide
+		 * mode) by setting low order bits of base_ptr to
+		 * zero.
+		 */
+
+		/* Asume that CS1 immediately follows. */
+		mio_boot_reg_cfg.u64 =
+			cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
+		region_base = mio_boot_reg_cfg.s.base << 16;
+		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+		if (!mio_boot_reg_cfg.s.en)
+			goto out;
+
+		cf_resources[num_resources].flags	= IORESOURCE_MEM;
+		cf_resources[num_resources].start	= region_base;
+		cf_resources[num_resources].end	= region_base + region_size - 1;
+		num_resources++;
+
+		octeon_cf_data.dma_engine = 0;
+		cf_resources[num_resources].flags	= IORESOURCE_IRQ;
+		cf_resources[num_resources].start	= OCTEON_IRQ_BOOTDMA;
+		cf_resources[num_resources].end	= OCTEON_IRQ_BOOTDMA;
+		num_resources++;
+	} else {
+		octeon_cf_data.dma_engine = -1;
+	}
+
+	pd = platform_device_alloc("pata_octeon_cf", -1);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	pd->dev.platform_data = &octeon_cf_data;
+
+	ret = platform_device_add_resources(pd, cf_resources, num_resources);
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+out:
+	return ret;
+}
+device_initcall(octeon_cf_device_init);
+
+/* Octeon Random Number Generator.  */
+static int __init octeon_rng_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+
+	struct resource rng_resources[] = {
+		{
+			.flags	= IORESOURCE_MEM,
+			.start	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS),
+			.end	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf
+		}, {
+			.flags	= IORESOURCE_MEM,
+			.start	= cvmx_build_io_address(8, 0),
+			.end	= cvmx_build_io_address(8, 0) + 0x7
+		}
+	};
+
+	pd = platform_device_alloc("octeon_rng", -1);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = platform_device_add_resources(pd, rng_resources,
+					    ARRAY_SIZE(rng_resources));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+
+out:
+	return ret;
+}
+device_initcall(octeon_rng_device_init);
+
+MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Platform driver for Octeon SOC");
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index 468a1209833..b321d3b1687 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -11,7 +11,6 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/serial.h>
 #include <linux/smp.h>
 #include <linux/types.h>
@@ -33,7 +32,6 @@
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-rnm-defs.h>
 
 #ifdef CONFIG_CAVIUM_DECODE_RSL
 extern void cvmx_interrupt_rsl_decode(void);
@@ -825,147 +823,3 @@ void prom_free_prom_memory(void)
 	   CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
 	octeon_hal_setup_reserved32();
 }
-
-static struct octeon_cf_data octeon_cf_data;
-
-static int __init octeon_cf_device_init(void)
-{
-	union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
-	unsigned long base_ptr, region_base, region_size;
-	struct platform_device *pd;
-	struct resource cf_resources[3];
-	unsigned int num_resources;
-	int i;
-	int ret = 0;
-
-	/* Setup octeon-cf platform device if present. */
-	base_ptr = 0;
-	if (octeon_bootinfo->major_version == 1
-		&& octeon_bootinfo->minor_version >= 1) {
-		if (octeon_bootinfo->compact_flash_common_base_addr)
-			base_ptr =
-				octeon_bootinfo->compact_flash_common_base_addr;
-	} else {
-		base_ptr = 0x1d000800;
-	}
-
-	if (!base_ptr)
-		return ret;
-
-	/* Find CS0 region. */
-	for (i = 0; i < 8; i++) {
-		mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i));
-		region_base = mio_boot_reg_cfg.s.base << 16;
-		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
-		if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
-		    && base_ptr < region_base + region_size)
-			break;
-	}
-	if (i >= 7) {
-		/* i and i + 1 are CS0 and CS1, both must be less than 8. */
-		goto out;
-	}
-	octeon_cf_data.base_region = i;
-	octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width;
-	octeon_cf_data.base_region_bias = base_ptr - region_base;
-	memset(cf_resources, 0, sizeof(cf_resources));
-	num_resources = 0;
-	cf_resources[num_resources].flags	= IORESOURCE_MEM;
-	cf_resources[num_resources].start	= region_base;
-	cf_resources[num_resources].end	= region_base + region_size - 1;
-	num_resources++;
-
-
-	if (!(base_ptr & 0xfffful)) {
-		/*
-		 * Boot loader signals availability of DMA (true_ide
-		 * mode) by setting low order bits of base_ptr to
-		 * zero.
-		 */
-
-		/* Asume that CS1 immediately follows. */
-		mio_boot_reg_cfg.u64 =
-			cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
-		region_base = mio_boot_reg_cfg.s.base << 16;
-		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
-		if (!mio_boot_reg_cfg.s.en)
-			goto out;
-
-		cf_resources[num_resources].flags	= IORESOURCE_MEM;
-		cf_resources[num_resources].start	= region_base;
-		cf_resources[num_resources].end	= region_base + region_size - 1;
-		num_resources++;
-
-		octeon_cf_data.dma_engine = 0;
-		cf_resources[num_resources].flags	= IORESOURCE_IRQ;
-		cf_resources[num_resources].start	= OCTEON_IRQ_BOOTDMA;
-		cf_resources[num_resources].end	= OCTEON_IRQ_BOOTDMA;
-		num_resources++;
-	} else {
-		octeon_cf_data.dma_engine = -1;
-	}
-
-	pd = platform_device_alloc("pata_octeon_cf", -1);
-	if (!pd) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	pd->dev.platform_data = &octeon_cf_data;
-
-	ret = platform_device_add_resources(pd, cf_resources, num_resources);
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pd);
-	if (ret)
-		goto fail;
-
-	return ret;
-fail:
-	platform_device_put(pd);
-out:
-	return ret;
-}
-device_initcall(octeon_cf_device_init);
-
-/* Octeon Random Number Generator.  */
-static int __init octeon_rng_device_init(void)
-{
-	struct platform_device *pd;
-	int ret = 0;
-
-	struct resource rng_resources[] = {
-		{
-			.flags	= IORESOURCE_MEM,
-			.start	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS),
-			.end	= XKPHYS_TO_PHYS(CVMX_RNM_CTL_STATUS) + 0xf
-		}, {
-			.flags	= IORESOURCE_MEM,
-			.start	= cvmx_build_io_address(8, 0),
-			.end	= cvmx_build_io_address(8, 0) + 0x7
-		}
-	};
-
-	pd = platform_device_alloc("octeon_rng", -1);
-	if (!pd) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	ret = platform_device_add_resources(pd, rng_resources,
-					    ARRAY_SIZE(rng_resources));
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pd);
-	if (ret)
-		goto fail;
-
-	return ret;
-fail:
-	platform_device_put(pd);
-
-out:
-	return ret;
-}
-device_initcall(octeon_rng_device_init);
-- 
cgit v1.2.3


From 0de663ef8627f35fda9106a8faaca512f29e493e Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Tue, 18 Aug 2009 13:23:37 +0100
Subject: MIPS: BCM63xx: Add Broadcom 63xx CPU definitions.

Todo: Nothing ever detects CPU_BCM6338 but the code tests for it anyway.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/cpu.h  |  7 +++++++
 arch/mips/kernel/cpu-probe.c | 23 +++++++++++++++++++++++
 arch/mips/mm/tlbex.c         |  4 ++++
 3 files changed, 34 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 3bdc0e3d89c..4b96d1a3605 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -113,6 +113,12 @@
 
 #define PRID_IMP_BCM4710	0x4000
 #define PRID_IMP_BCM3302	0x9000
+#define PRID_IMP_BCM6338	0x9000
+#define PRID_IMP_BCM6345	0x8000
+#define PRID_IMP_BCM6348	0x9100
+#define PRID_IMP_BCM4350	0xA000
+#define PRID_REV_BCM6358	0x0010
+#define PRID_REV_BCM6368	0x0030
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_CAVIUM
@@ -210,6 +216,7 @@ enum cpu_type_enum {
 	 */
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
+	CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358,
 
 	/*
 	 * MIPS64 class processors
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 4579d5c12da..f709657e4dc 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -156,6 +156,9 @@ void __init check_wait(void)
 	case CPU_25KF:
 	case CPU_PR4450:
 	case CPU_BCM3302:
+	case CPU_BCM6338:
+	case CPU_BCM6348:
+	case CPU_BCM6358:
 	case CPU_CAVIUM_OCTEON:
 		cpu_wait = r4k_wait;
 		break;
@@ -854,6 +857,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
 	case PRID_IMP_BCM3302:
+	 /* same as PRID_IMP_BCM6338 */
 		c->cputype = CPU_BCM3302;
 		__cpu_name[cpu] = "Broadcom BCM3302";
 		break;
@@ -861,6 +865,25 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_BCM4710;
 		__cpu_name[cpu] = "Broadcom BCM4710";
 		break;
+	case PRID_IMP_BCM6345:
+		c->cputype = CPU_BCM6345;
+		__cpu_name[cpu] = "Broadcom BCM6345";
+		break;
+	case PRID_IMP_BCM6348:
+		c->cputype = CPU_BCM6348;
+		__cpu_name[cpu] = "Broadcom BCM6348";
+		break;
+	case PRID_IMP_BCM4350:
+		switch (c->processor_id & 0xf0) {
+		case PRID_REV_BCM6358:
+			c->cputype = CPU_BCM6358;
+			__cpu_name[cpu] = "Broadcom BCM6358";
+			break;
+		default:
+			c->cputype = CPU_UNKNOWN;
+			break;
+		}
+		break;
 	}
 }
 
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index bc66f57f325..bb1719a55d2 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -321,6 +321,10 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_BCM3302:
 	case CPU_BCM4710:
 	case CPU_LOONGSON2:
+	case CPU_BCM6338:
+	case CPU_BCM6345:
+	case CPU_BCM6348:
+	case CPU_BCM6358:
 	case CPU_R5500:
 		if (m4kc_tlbp_war())
 			uasm_i_nop(p);
-- 
cgit v1.2.3


From e7300d04bd0809eb7ea10a2ed8c729459f816e36 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Tue, 18 Aug 2009 13:23:37 +0100
Subject: MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig                                  |  16 +
 arch/mips/Makefile                                 |   7 +
 arch/mips/bcm63xx/Kconfig                          |  25 +
 arch/mips/bcm63xx/Makefile                         |   7 +
 arch/mips/bcm63xx/boards/Kconfig                   |  11 +
 arch/mips/bcm63xx/boards/Makefile                  |   3 +
 arch/mips/bcm63xx/boards/board_bcm963xx.c          | 837 ++++++++++++++++++
 arch/mips/bcm63xx/clk.c                            | 226 +++++
 arch/mips/bcm63xx/cpu.c                            | 345 ++++++++
 arch/mips/bcm63xx/cs.c                             | 144 +++
 arch/mips/bcm63xx/dev-dsp.c                        |  56 ++
 arch/mips/bcm63xx/early_printk.c                   |  30 +
 arch/mips/bcm63xx/gpio.c                           | 134 +++
 arch/mips/bcm63xx/irq.c                            | 253 ++++++
 arch/mips/bcm63xx/prom.c                           |  55 ++
 arch/mips/bcm63xx/setup.c                          | 125 +++
 arch/mips/bcm63xx/timer.c                          | 205 +++++
 arch/mips/configs/bcm63xx_defconfig                | 972 +++++++++++++++++++++
 arch/mips/include/asm/fixmap.h                     |   4 +
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h |  12 +
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h   |  11 +
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h   | 538 ++++++++++++
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h    |  10 +
 .../include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h     |  13 +
 .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    |  45 +
 .../include/asm/mach-bcm63xx/bcm63xx_dev_pci.h     |   6 +
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h  |  22 +
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h    |  93 ++
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h   |  15 +
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h  | 773 ++++++++++++++++
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h |  11 +
 .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |  60 ++
 .../asm/mach-bcm63xx/cpu-feature-overrides.h       |  51 ++
 arch/mips/include/asm/mach-bcm63xx/gpio.h          |  15 +
 arch/mips/include/asm/mach-bcm63xx/war.h           |  25 +
 arch/mips/pci/Makefile                             |   2 +
 arch/mips/pci/fixup-bcm63xx.c                      |  21 +
 arch/mips/pci/ops-bcm63xx.c                        | 467 ++++++++++
 arch/mips/pci/pci-bcm63xx.c                        | 224 +++++
 arch/mips/pci/pci-bcm63xx.h                        |  27 +
 40 files changed, 5896 insertions(+)
 create mode 100644 arch/mips/bcm63xx/Kconfig
 create mode 100644 arch/mips/bcm63xx/Makefile
 create mode 100644 arch/mips/bcm63xx/boards/Kconfig
 create mode 100644 arch/mips/bcm63xx/boards/Makefile
 create mode 100644 arch/mips/bcm63xx/boards/board_bcm963xx.c
 create mode 100644 arch/mips/bcm63xx/clk.c
 create mode 100644 arch/mips/bcm63xx/cpu.c
 create mode 100644 arch/mips/bcm63xx/cs.c
 create mode 100644 arch/mips/bcm63xx/dev-dsp.c
 create mode 100644 arch/mips/bcm63xx/early_printk.c
 create mode 100644 arch/mips/bcm63xx/gpio.c
 create mode 100644 arch/mips/bcm63xx/irq.c
 create mode 100644 arch/mips/bcm63xx/prom.c
 create mode 100644 arch/mips/bcm63xx/setup.c
 create mode 100644 arch/mips/bcm63xx/timer.c
 create mode 100644 arch/mips/configs/bcm63xx_defconfig
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/gpio.h
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/war.h
 create mode 100644 arch/mips/pci/fixup-bcm63xx.c
 create mode 100644 arch/mips/pci/ops-bcm63xx.c
 create mode 100644 arch/mips/pci/pci-bcm63xx.c
 create mode 100644 arch/mips/pci/pci-bcm63xx.h

(limited to 'arch')

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 224e548f0fc..705a7a9170f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -80,6 +80,21 @@ config BCM47XX
 	help
 	 Support for BCM47XX based boards
 
+config BCM63XX
+	bool "Broadcom BCM63XX based boards"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+	select SWAP_IO_SPACE
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	 Support for BCM63XX based boards
+
 config MIPS_COBALT
 	bool "Cobalt Server"
 	select CEVT_R4K
@@ -645,6 +660,7 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
+source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 1efa9aa6488..c825b14b4ed 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -564,6 +564,13 @@ core-$(CONFIG_BCM47XX)		+= arch/mips/bcm47xx/
 cflags-$(CONFIG_BCM47XX)	+= -I$(srctree)/arch/mips/include/asm/mach-bcm47xx
 load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
 
+#
+# Broadcom BCM63XX boards
+#
+core-$(CONFIG_BCM63XX)		+= arch/mips/bcm63xx/
+cflags-$(CONFIG_BCM63XX)	+= -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
+load-$(CONFIG_BCM63XX)		:= 0xffffffff80010000
+
 #
 # SNI RM
 #
diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig
new file mode 100644
index 00000000000..fb177d6df06
--- /dev/null
+++ b/arch/mips/bcm63xx/Kconfig
@@ -0,0 +1,25 @@
+menu "CPU support"
+	depends on BCM63XX
+
+config BCM63XX_CPU_6338
+	bool "support 6338 CPU"
+	select HW_HAS_PCI
+	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
+
+config BCM63XX_CPU_6345
+	bool "support 6345 CPU"
+	select USB_OHCI_BIG_ENDIAN_DESC
+	select USB_OHCI_BIG_ENDIAN_MMIO
+
+config BCM63XX_CPU_6348
+	bool "support 6348 CPU"
+	select HW_HAS_PCI
+
+config BCM63XX_CPU_6358
+	bool "support 6358 CPU"
+	select HW_HAS_PCI
+endmenu
+
+source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
new file mode 100644
index 00000000000..99bbc8753a2
--- /dev/null
+++ b/arch/mips/bcm63xx/Makefile
@@ -0,0 +1,7 @@
+obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
+		   dev-dsp.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+
+obj-y		+= boards/
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig
new file mode 100644
index 00000000000..c6aed33d893
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/Kconfig
@@ -0,0 +1,11 @@
+choice
+	prompt "Board support"
+	depends on BCM63XX
+	default BOARD_BCM963XX
+
+config BOARD_BCM963XX
+       bool "Generic Broadcom 963xx boards"
+	select SSB
+       help
+
+endchoice
diff --git a/arch/mips/bcm63xx/boards/Makefile b/arch/mips/bcm63xx/boards/Makefile
new file mode 100644
index 00000000000..e5cc86dc1da
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
new file mode 100644
index 00000000000..fd77f548207
--- /dev/null
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -0,0 +1,837 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ssb/ssb.h>
+#include <asm/addrspace.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_dev_pci.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+#include <board_bcm963xx.h>
+
+#define PFX	"board_bcm963xx: "
+
+static struct bcm963xx_nvram nvram;
+static unsigned int mac_addr_used;
+static struct board_info board;
+
+/*
+ * known 6338 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6338
+static struct board_info __initdata board_96338gw = {
+	.name				= "96338GW",
+	.expected_cpu_id		= 0x6338,
+
+	.has_enet0			= 1,
+	.enet0 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ses",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		}
+	},
+};
+
+static struct board_info __initdata board_96338w = {
+	.name				= "96338W",
+	.expected_cpu_id		= 0x6338,
+
+	.has_enet0			= 1,
+	.enet0 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ses",
+			.gpio		= 5,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+#endif
+
+/*
+ * known 6345 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6345
+static struct board_info __initdata board_96345gw2 = {
+	.name				= "96345GW2",
+	.expected_cpu_id		= 0x6345,
+};
+#endif
+
+/*
+ * known 6348 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6348
+static struct board_info __initdata board_96348r = {
+	.name				= "96348R",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw_10 = {
+	.name				= "96348GW-10",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0			= 1,
+	.has_pccard			= 1,
+	.has_ehci0			= 1,
+
+	.has_dsp			= 1,
+	.dsp = {
+		.gpio_rst		= 6,
+		.gpio_int		= 34,
+		.cs			= 2,
+		.ext_irq		= 2,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw_11 = {
+	.name				= "96348GW-11",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_96348gw = {
+	.name				= "96348GW",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0 = 1,
+
+	.has_dsp			= 1,
+	.dsp = {
+		.gpio_rst		= 6,
+		.gpio_int		= 34,
+		.ext_irq		= 2,
+		.cs			= 2,
+	},
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 2,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 3,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 0,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 1,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_FAST2404 = {
+        .name                           = "F@ST2404",
+        .expected_cpu_id                = 0x6348,
+
+        .has_enet0                      = 1,
+        .has_enet1                      = 1,
+        .has_pci                        = 1,
+
+        .enet0 = {
+                .has_phy                = 1,
+                .use_internal_phy       = 1,
+        },
+
+        .enet1 = {
+                .force_speed_100        = 1,
+                .force_duplex_full      = 1,
+        },
+
+
+        .has_ohci0 = 1,
+        .has_pccard = 1,
+        .has_ehci0 = 1,
+};
+
+static struct board_info __initdata board_DV201AMR = {
+	.name				= "DV201AMR",
+	.expected_cpu_id		= 0x6348,
+
+	.has_pci			= 1,
+	.has_ohci0			= 1,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+};
+
+static struct board_info __initdata board_96348gw_a = {
+	.name				= "96348GW-A",
+	.expected_cpu_id		= 0x6348,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+	.has_ohci0 = 1,
+};
+#endif
+
+/*
+ * known 6358 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6358
+static struct board_info __initdata board_96358vw = {
+	.name				= "96358VW",
+	.expected_cpu_id		= 0x6358,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		{
+			.name		= "adsl-fail",
+			.gpio		= 15,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp",
+			.gpio		= 22,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 23,
+			.active_low	= 1,
+		},
+		{
+			.name		= "power",
+			.gpio		= 4,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 5,
+		},
+	},
+};
+
+static struct board_info __initdata board_96358vw2 = {
+	.name				= "96358VW2",
+	.expected_cpu_id		= 0x6358,
+
+	.has_enet0			= 1,
+	.has_enet1			= 1,
+	.has_pci			= 1,
+
+	.enet0 = {
+		.has_phy		= 1,
+		.use_internal_phy	= 1,
+	},
+
+	.enet1 = {
+		.force_speed_100	= 1,
+		.force_duplex_full	= 1,
+	},
+
+
+	.has_ohci0 = 1,
+	.has_pccard = 1,
+	.has_ehci0 = 1,
+
+	.leds = {
+		{
+			.name		= "adsl",
+			.gpio		= 22,
+			.active_low	= 1,
+		},
+		{
+			.name		= "ppp-fail",
+			.gpio		= 23,
+		},
+		{
+			.name		= "power",
+			.gpio		= 5,
+			.active_low	= 1,
+			.default_trigger = "default-on",
+		},
+		{
+			.name		= "stop",
+			.gpio		= 4,
+			.active_low	= 1,
+		},
+	},
+};
+
+static struct board_info __initdata board_AGPFS0 = {
+	.name                           = "AGPF-S0",
+	.expected_cpu_id                = 0x6358,
+
+	.has_enet0                      = 1,
+	.has_enet1                      = 1,
+	.has_pci                        = 1,
+
+	.enet0 = {
+		.has_phy                = 1,
+		.use_internal_phy       = 1,
+	},
+
+	.enet1 = {
+		.force_speed_100        = 1,
+		.force_duplex_full      = 1,
+	},
+
+	.has_ohci0 = 1,
+	.has_ehci0 = 1,
+};
+#endif
+
+/*
+ * all boards
+ */
+static const struct board_info __initdata *bcm963xx_boards[] = {
+#ifdef CONFIG_BCM63XX_CPU_6338
+	&board_96338gw,
+	&board_96338w,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+	&board_96345gw2,
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+	&board_96348r,
+	&board_96348gw,
+	&board_96348gw_10,
+	&board_96348gw_11,
+	&board_FAST2404,
+	&board_DV201AMR,
+	&board_96348gw_a,
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+	&board_96358vw,
+	&board_96358vw2,
+	&board_AGPFS0,
+#endif
+};
+
+/*
+ * early init callback, read nvram data from flash and checksum it
+ */
+void __init board_prom_init(void)
+{
+	unsigned int check_len, i;
+	u8 *boot_addr, *cfe, *p;
+	char cfe_version[32];
+	u32 val;
+
+	/* read base address of boot chip select (0)
+	 * 6345 does not have MPI but boots from standard
+	 * MIPS Flash address */
+	if (BCMCPU_IS_6345())
+		val = 0x1fc00000;
+	else {
+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+		val &= MPI_CSBASE_BASE_MASK;
+	}
+	boot_addr = (u8 *)KSEG1ADDR(val);
+
+	/* dump cfe version */
+	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+	if (!memcmp(cfe, "cfe-v", 5))
+		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+	else
+		strcpy(cfe_version, "unknown");
+	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+
+	/* extract nvram data */
+	memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
+
+	/* check checksum before using data */
+	if (nvram.version <= 4)
+		check_len = offsetof(struct bcm963xx_nvram, checksum_old);
+	else
+		check_len = sizeof(nvram);
+	val = 0;
+	p = (u8 *)&nvram;
+	while (check_len--)
+		val += *p;
+	if (val) {
+		printk(KERN_ERR PFX "invalid nvram checksum\n");
+		return;
+	}
+
+	/* find board by name */
+	for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+		if (strncmp(nvram.name, bcm963xx_boards[i]->name,
+			    sizeof(nvram.name)))
+			continue;
+		/* copy, board desc array is marked initdata */
+		memcpy(&board, bcm963xx_boards[i], sizeof(board));
+		break;
+	}
+
+	/* bail out if board is not found, will complain later */
+	if (!board.name[0]) {
+		char name[17];
+		memcpy(name, nvram.name, 16);
+		name[16] = 0;
+		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
+		       name);
+		return;
+	}
+
+	/* setup pin multiplexing depending on board enabled device,
+	 * this has to be done this early since PCI init is done
+	 * inside arch_initcall */
+	val = 0;
+
+#ifdef CONFIG_PCI
+	if (board.has_pci) {
+		bcm63xx_pci_enabled = 1;
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G2_PCI;
+	}
+#endif
+
+	if (board.has_pccard) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G1_MII_PCCARD;
+	}
+
+	if (board.has_enet0 && !board.enet0.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	if (board.has_enet1 && !board.enet1.use_internal_phy) {
+		if (BCMCPU_IS_6348())
+			val |= GPIO_MODE_6348_G3_EXT_MII |
+				GPIO_MODE_6348_G0_EXT_MII;
+	}
+
+	bcm_gpio_writel(val, GPIO_MODE_REG);
+}
+
+/*
+ * second stage init callback, good time to panic if we couldn't
+ * identify on which board we're running since early printk is working
+ */
+void __init board_setup(void)
+{
+	if (!board.name[0])
+		panic("unable to detect bcm963xx board");
+	printk(KERN_INFO PFX "board name: %s\n", board.name);
+
+	/* make sure we're running on expected cpu */
+	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
+		panic("unexpected CPU for bcm963xx board");
+}
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+	return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+	u8 *p;
+	int count;
+
+	if (mac_addr_used >= nvram.mac_addr_count) {
+		printk(KERN_ERR PFX "not enough mac address\n");
+		return -ENODEV;
+	}
+
+	memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+	p = mac + ETH_ALEN - 1;
+	count = mac_addr_used;
+
+	while (count--) {
+		do {
+			(*p)++;
+			if (*p != 0)
+				break;
+			p--;
+		} while (p != mac);
+	}
+
+	if (p == mac) {
+		printk(KERN_ERR PFX "unable to fetch mac address\n");
+		return -ENODEV;
+	}
+
+	mac_addr_used++;
+	return 0;
+}
+
+static struct mtd_partition mtd_partitions[] = {
+	{
+		.name		= "cfe",
+		.offset		= 0x0,
+		.size		= 0x40000,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width			= 2,
+	.nr_parts		= ARRAY_SIZE(mtd_partitions),
+	.parts			= mtd_partitions,
+};
+
+static struct resource mtd_resources[] = {
+	{
+		.start		= 0,	/* filled at runtime */
+		.end		= 0,	/* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device mtd_dev = {
+	.name			= "physmap-flash",
+	.resource		= mtd_resources,
+	.num_resources		= ARRAY_SIZE(mtd_resources),
+	.dev			= {
+		.platform_data	= &flash_data,
+	},
+};
+
+/*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+#ifdef CONFIG_SSB_PCIHOST
+static struct ssb_sprom bcm63xx_sprom = {
+	.revision		= 0x02,
+	.board_rev		= 0x17,
+	.country_code		= 0x0,
+	.ant_available_bg 	= 0x3,
+	.pa0b0			= 0x15ae,
+	.pa0b1			= 0xfa85,
+	.pa0b2			= 0xfe8d,
+	.pa1b0			= 0xffff,
+	.pa1b1			= 0xffff,
+	.pa1b2			= 0xffff,
+	.gpio0			= 0xff,
+	.gpio1			= 0xff,
+	.gpio2			= 0xff,
+	.gpio3			= 0xff,
+	.maxpwr_bg		= 0x004c,
+	.itssi_bg		= 0x00,
+	.boardflags_lo		= 0x2848,
+	.boardflags_hi		= 0x0000,
+};
+#endif
+
+static struct gpio_led_platform_data bcm63xx_led_data;
+
+static struct platform_device bcm63xx_gpio_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &bcm63xx_led_data,
+};
+
+/*
+ * third stage init callback, register all board devices.
+ */
+int __init board_register_devices(void)
+{
+	u32 val;
+
+	if (board.has_enet0 &&
+	    !board_get_mac_address(board.enet0.mac_addr))
+		bcm63xx_enet_register(0, &board.enet0);
+
+	if (board.has_enet1 &&
+	    !board_get_mac_address(board.enet1.mac_addr))
+		bcm63xx_enet_register(1, &board.enet1);
+
+	if (board.has_dsp)
+		bcm63xx_dsp_register(&board.dsp);
+
+	/* Generate MAC address for WLAN and
+	 * register our SPROM */
+#ifdef CONFIG_SSB_PCIHOST
+	if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+		if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+			printk(KERN_ERR "failed to register fallback SPROM\n");
+	}
+#endif
+
+	/* read base address of boot chip select (0) */
+	if (BCMCPU_IS_6345())
+		val = 0x1fc00000;
+	else {
+		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+		val &= MPI_CSBASE_BASE_MASK;
+	}
+	mtd_resources[0].start = val;
+	mtd_resources[0].end = 0x1FFFFFFF;
+
+	platform_device_register(&mtd_dev);
+
+	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+	bcm63xx_led_data.leds = board.leds;
+
+	platform_device_register(&bcm63xx_gpio_leds);
+
+	return 0;
+}
+
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
new file mode 100644
index 00000000000..2c68ee9ccee
--- /dev/null
+++ b/arch/mips/bcm63xx/clk.c
@@ -0,0 +1,226 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_clk.h>
+
+static DEFINE_MUTEX(clocks_mutex);
+
+
+static void clk_enable_unlocked(struct clk *clk)
+{
+	if (clk->set && (clk->usage++) == 0)
+		clk->set(clk, 1);
+}
+
+static void clk_disable_unlocked(struct clk *clk)
+{
+	if (clk->set && (--clk->usage) == 0)
+		clk->set(clk, 0);
+}
+
+static void bcm_hwclock_set(u32 mask, int enable)
+{
+	u32 reg;
+
+	reg = bcm_perf_readl(PERF_CKCTL_REG);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	bcm_perf_writel(reg, PERF_CKCTL_REG);
+}
+
+/*
+ * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+ */
+static void enet_misc_set(struct clk *clk, int enable)
+{
+	u32 mask;
+
+	if (BCMCPU_IS_6338())
+		mask = CKCTL_6338_ENET_EN;
+	else if (BCMCPU_IS_6345())
+		mask = CKCTL_6345_ENET_EN;
+	else if (BCMCPU_IS_6348())
+		mask = CKCTL_6348_ENET_EN;
+	else
+		/* BCMCPU_IS_6358 */
+		mask = CKCTL_6358_EMUSB_EN;
+	bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_enet_misc = {
+	.set	= enet_misc_set,
+};
+
+/*
+ * Ethernet MAC clocks: only revelant on 6358, silently enable misc
+ * clocks
+ */
+static void enetx_set(struct clk *clk, int enable)
+{
+	if (enable)
+		clk_enable_unlocked(&clk_enet_misc);
+	else
+		clk_disable_unlocked(&clk_enet_misc);
+
+	if (BCMCPU_IS_6358()) {
+		u32 mask;
+
+		if (clk->id == 0)
+			mask = CKCTL_6358_ENET0_EN;
+		else
+			mask = CKCTL_6358_ENET1_EN;
+		bcm_hwclock_set(mask, enable);
+	}
+}
+
+static struct clk clk_enet0 = {
+	.id	= 0,
+	.set	= enetx_set,
+};
+
+static struct clk clk_enet1 = {
+	.id	= 1,
+	.set	= enetx_set,
+};
+
+/*
+ * Ethernet PHY clock
+ */
+static void ephy_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6358())
+		return;
+	bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
+}
+
+
+static struct clk clk_ephy = {
+	.set	= ephy_set,
+};
+
+/*
+ * PCM clock
+ */
+static void pcm_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6358())
+		return;
+	bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
+}
+
+static struct clk clk_pcm = {
+	.set	= pcm_set,
+};
+
+/*
+ * USB host clock
+ */
+static void usbh_set(struct clk *clk, int enable)
+{
+	if (!BCMCPU_IS_6348())
+		return;
+	bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+}
+
+static struct clk clk_usbh = {
+	.set	= usbh_set,
+};
+
+/*
+ * SPI clock
+ */
+static void spi_set(struct clk *clk, int enable)
+{
+	u32 mask;
+
+	if (BCMCPU_IS_6338())
+		mask = CKCTL_6338_SPI_EN;
+	else if (BCMCPU_IS_6348())
+		mask = CKCTL_6348_SPI_EN;
+	else
+		/* BCMCPU_IS_6358 */
+		mask = CKCTL_6358_SPI_EN;
+	bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_spi = {
+	.set	= spi_set,
+};
+
+/*
+ * Internal peripheral clock
+ */
+static struct clk clk_periph = {
+	.rate	= (50 * 1000 * 1000),
+};
+
+
+/*
+ * Linux clock API implementation
+ */
+int clk_enable(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	clk_enable_unlocked(clk);
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	clk_disable_unlocked(clk);
+	mutex_unlock(&clocks_mutex);
+}
+
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "enet0"))
+		return &clk_enet0;
+	if (!strcmp(id, "enet1"))
+		return &clk_enet1;
+	if (!strcmp(id, "ephy"))
+		return &clk_ephy;
+	if (!strcmp(id, "usbh"))
+		return &clk_usbh;
+	if (!strcmp(id, "spi"))
+		return &clk_spi;
+	if (!strcmp(id, "periph"))
+		return &clk_periph;
+	if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
+		return &clk_pcm;
+	return ERR_PTR(-ENOENT);
+}
+
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
new file mode 100644
index 00000000000..6dc43f0483e
--- /dev/null
+++ b/arch/mips/bcm63xx/cpu.c
@@ -0,0 +1,345 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_irq.h>
+
+const unsigned long *bcm63xx_regs_base;
+EXPORT_SYMBOL(bcm63xx_regs_base);
+
+const int *bcm63xx_irqs;
+EXPORT_SYMBOL(bcm63xx_irqs);
+
+static u16 bcm63xx_cpu_id;
+static u16 bcm63xx_cpu_rev;
+static unsigned int bcm63xx_cpu_freq;
+static unsigned int bcm63xx_memory_size;
+
+/*
+ * 6338 register sets and irqs
+ */
+static const unsigned long bcm96338_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6338_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6338_PERF_BASE,
+	[RSET_TIMER]		= BCM_6338_TIMER_BASE,
+	[RSET_WDT]		= BCM_6338_WDT_BASE,
+	[RSET_UART0]		= BCM_6338_UART0_BASE,
+	[RSET_GPIO]		= BCM_6338_GPIO_BASE,
+	[RSET_SPI]		= BCM_6338_SPI_BASE,
+	[RSET_OHCI0]		= BCM_6338_OHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6338_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6338_USBH_PRIV_BASE,
+	[RSET_UDC0]		= BCM_6338_UDC0_BASE,
+	[RSET_MPI]		= BCM_6338_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6338_PCMCIA_BASE,
+	[RSET_SDRAM]		= BCM_6338_SDRAM_BASE,
+	[RSET_DSL]		= BCM_6338_DSL_BASE,
+	[RSET_ENET0]		= BCM_6338_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6338_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6338_ENETDMA_BASE,
+	[RSET_MEMC]		= BCM_6338_MEMC_BASE,
+	[RSET_DDR]		= BCM_6338_DDR_BASE,
+};
+
+static const int bcm96338_irqs[] = {
+	[IRQ_TIMER]		= BCM_6338_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6338_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6338_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6338_ENET0_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6338_ENET_PHY_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6338_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6338_ENET0_TXDMA_IRQ,
+};
+
+/*
+ * 6345 register sets and irqs
+ */
+static const unsigned long bcm96345_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6345_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6345_PERF_BASE,
+	[RSET_TIMER]		= BCM_6345_TIMER_BASE,
+	[RSET_WDT]		= BCM_6345_WDT_BASE,
+	[RSET_UART0]		= BCM_6345_UART0_BASE,
+	[RSET_GPIO]		= BCM_6345_GPIO_BASE,
+	[RSET_SPI]		= BCM_6345_SPI_BASE,
+	[RSET_UDC0]		= BCM_6345_UDC0_BASE,
+	[RSET_OHCI0]		= BCM_6345_OHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6345_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6345_USBH_PRIV_BASE,
+	[RSET_MPI]		= BCM_6345_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6345_PCMCIA_BASE,
+	[RSET_DSL]		= BCM_6345_DSL_BASE,
+	[RSET_ENET0]		= BCM_6345_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6345_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6345_ENETDMA_BASE,
+	[RSET_EHCI0]		= BCM_6345_EHCI0_BASE,
+	[RSET_SDRAM]		= BCM_6345_SDRAM_BASE,
+	[RSET_MEMC]		= BCM_6345_MEMC_BASE,
+	[RSET_DDR]		= BCM_6345_DDR_BASE,
+};
+
+static const int bcm96345_irqs[] = {
+	[IRQ_TIMER]		= BCM_6345_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6345_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6345_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6345_ENET0_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6345_ENET_PHY_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6345_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6345_ENET0_TXDMA_IRQ,
+};
+
+/*
+ * 6348 register sets and irqs
+ */
+static const unsigned long bcm96348_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6348_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6348_PERF_BASE,
+	[RSET_TIMER]		= BCM_6348_TIMER_BASE,
+	[RSET_WDT]		= BCM_6348_WDT_BASE,
+	[RSET_UART0]		= BCM_6348_UART0_BASE,
+	[RSET_GPIO]		= BCM_6348_GPIO_BASE,
+	[RSET_SPI]		= BCM_6348_SPI_BASE,
+	[RSET_OHCI0]		= BCM_6348_OHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6348_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6348_USBH_PRIV_BASE,
+	[RSET_MPI]		= BCM_6348_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6348_PCMCIA_BASE,
+	[RSET_SDRAM]		= BCM_6348_SDRAM_BASE,
+	[RSET_DSL]		= BCM_6348_DSL_BASE,
+	[RSET_ENET0]		= BCM_6348_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6348_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6348_ENETDMA_BASE,
+	[RSET_MEMC]		= BCM_6348_MEMC_BASE,
+	[RSET_DDR]		= BCM_6348_DDR_BASE,
+};
+
+static const int bcm96348_irqs[] = {
+	[IRQ_TIMER]		= BCM_6348_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6348_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6348_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6348_ENET0_IRQ,
+	[IRQ_ENET1]		= BCM_6348_ENET1_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6348_ENET_PHY_IRQ,
+	[IRQ_OHCI0]		= BCM_6348_OHCI0_IRQ,
+	[IRQ_PCMCIA]		= BCM_6348_PCMCIA_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6348_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6348_ENET0_TXDMA_IRQ,
+	[IRQ_ENET1_RXDMA]	= BCM_6348_ENET1_RXDMA_IRQ,
+	[IRQ_ENET1_TXDMA]	= BCM_6348_ENET1_TXDMA_IRQ,
+	[IRQ_PCI]		= BCM_6348_PCI_IRQ,
+};
+
+/*
+ * 6358 register sets and irqs
+ */
+static const unsigned long bcm96358_regs_base[] = {
+	[RSET_DSL_LMEM]		= BCM_6358_DSL_LMEM_BASE,
+	[RSET_PERF]		= BCM_6358_PERF_BASE,
+	[RSET_TIMER]		= BCM_6358_TIMER_BASE,
+	[RSET_WDT]		= BCM_6358_WDT_BASE,
+	[RSET_UART0]		= BCM_6358_UART0_BASE,
+	[RSET_GPIO]		= BCM_6358_GPIO_BASE,
+	[RSET_SPI]		= BCM_6358_SPI_BASE,
+	[RSET_OHCI0]		= BCM_6358_OHCI0_BASE,
+	[RSET_EHCI0]		= BCM_6358_EHCI0_BASE,
+	[RSET_OHCI_PRIV]	= BCM_6358_OHCI_PRIV_BASE,
+	[RSET_USBH_PRIV]	= BCM_6358_USBH_PRIV_BASE,
+	[RSET_MPI]		= BCM_6358_MPI_BASE,
+	[RSET_PCMCIA]		= BCM_6358_PCMCIA_BASE,
+	[RSET_SDRAM]		= BCM_6358_SDRAM_BASE,
+	[RSET_DSL]		= BCM_6358_DSL_BASE,
+	[RSET_ENET0]		= BCM_6358_ENET0_BASE,
+	[RSET_ENET1]		= BCM_6358_ENET1_BASE,
+	[RSET_ENETDMA]		= BCM_6358_ENETDMA_BASE,
+	[RSET_MEMC]		= BCM_6358_MEMC_BASE,
+	[RSET_DDR]		= BCM_6358_DDR_BASE,
+};
+
+static const int bcm96358_irqs[] = {
+	[IRQ_TIMER]		= BCM_6358_TIMER_IRQ,
+	[IRQ_UART0]		= BCM_6358_UART0_IRQ,
+	[IRQ_DSL]		= BCM_6358_DSL_IRQ,
+	[IRQ_ENET0]		= BCM_6358_ENET0_IRQ,
+	[IRQ_ENET1]		= BCM_6358_ENET1_IRQ,
+	[IRQ_ENET_PHY]		= BCM_6358_ENET_PHY_IRQ,
+	[IRQ_OHCI0]		= BCM_6358_OHCI0_IRQ,
+	[IRQ_EHCI0]		= BCM_6358_EHCI0_IRQ,
+	[IRQ_PCMCIA]		= BCM_6358_PCMCIA_IRQ,
+	[IRQ_ENET0_RXDMA]	= BCM_6358_ENET0_RXDMA_IRQ,
+	[IRQ_ENET0_TXDMA]	= BCM_6358_ENET0_TXDMA_IRQ,
+	[IRQ_ENET1_RXDMA]	= BCM_6358_ENET1_RXDMA_IRQ,
+	[IRQ_ENET1_TXDMA]	= BCM_6358_ENET1_TXDMA_IRQ,
+	[IRQ_PCI]		= BCM_6358_PCI_IRQ,
+};
+
+u16 __bcm63xx_get_cpu_id(void)
+{
+	return bcm63xx_cpu_id;
+}
+
+EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
+
+u16 bcm63xx_get_cpu_rev(void)
+{
+	return bcm63xx_cpu_rev;
+}
+
+EXPORT_SYMBOL(bcm63xx_get_cpu_rev);
+
+unsigned int bcm63xx_get_cpu_freq(void)
+{
+	return bcm63xx_cpu_freq;
+}
+
+unsigned int bcm63xx_get_memory_size(void)
+{
+	return bcm63xx_memory_size;
+}
+
+static unsigned int detect_cpu_clock(void)
+{
+	unsigned int tmp, n1 = 0, n2 = 0, m1 = 0;
+
+	/* BCM6338 has a fixed 240 Mhz frequency */
+	if (BCMCPU_IS_6338())
+		return 240000000;
+
+	/* BCM6345 has a fixed 140Mhz frequency */
+	if (BCMCPU_IS_6345())
+		return 140000000;
+
+	/*
+	 * frequency depends on PLL configuration:
+	 */
+	if (BCMCPU_IS_6348()) {
+		/* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */
+		tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG);
+		n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT;
+		n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT;
+		m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT;
+		n1 += 1;
+		n2 += 2;
+		m1 += 1;
+	}
+
+	if (BCMCPU_IS_6358()) {
+		/* 16MHz * N1 * N2 / M1_CPU */
+		tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG);
+		n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT;
+		n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT;
+		m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT;
+	}
+
+	return (16 * 1000000 * n1 * n2) / m1;
+}
+
+/*
+ * attempt to detect the amount of memory installed
+ */
+static unsigned int detect_memory_size(void)
+{
+	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+	u32 val;
+
+	if (BCMCPU_IS_6345())
+		return (8 * 1024 * 1024);
+
+	if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
+		val = bcm_sdram_readl(SDRAM_CFG_REG);
+		rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT;
+		cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT;
+		is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0;
+		banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
+	}
+
+	if (BCMCPU_IS_6358()) {
+		val = bcm_memc_readl(MEMC_CFG_REG);
+		rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
+		cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
+		is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1;
+		banks = 2;
+	}
+
+	/* 0 => 11 address bits ... 2 => 13 address bits */
+	rows += 11;
+
+	/* 0 => 8 address bits ... 2 => 10 address bits */
+	cols += 8;
+
+	return 1 << (cols + rows + (is_32bits + 1) + banks);
+}
+
+void __init bcm63xx_cpu_init(void)
+{
+	unsigned int tmp, expected_cpu_id;
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	/* soc registers location depends on cpu type */
+	expected_cpu_id = 0;
+
+	switch (c->cputype) {
+	/*
+	 * BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c
+	 */
+	case CPU_BCM3302:
+		expected_cpu_id = BCM6338_CPU_ID;
+		bcm63xx_regs_base = bcm96338_regs_base;
+		bcm63xx_irqs = bcm96338_irqs;
+		break;
+	case CPU_BCM6345:
+		expected_cpu_id = BCM6345_CPU_ID;
+		bcm63xx_regs_base = bcm96345_regs_base;
+		bcm63xx_irqs = bcm96345_irqs;
+		break;
+	case CPU_BCM6348:
+		expected_cpu_id = BCM6348_CPU_ID;
+		bcm63xx_regs_base = bcm96348_regs_base;
+		bcm63xx_irqs = bcm96348_irqs;
+		break;
+	case CPU_BCM6358:
+		expected_cpu_id = BCM6358_CPU_ID;
+		bcm63xx_regs_base = bcm96358_regs_base;
+		bcm63xx_irqs = bcm96358_irqs;
+		break;
+	}
+
+	/*
+	 * really early to panic, but delaying panic would not help since we
+	 * will never get any working console
+	 */
+	if (!expected_cpu_id)
+		panic("unsupported Broadcom CPU");
+
+	/*
+	 * bcm63xx_regs_base is set, we can access soc registers
+	 */
+
+	/* double check CPU type */
+	tmp = bcm_perf_readl(PERF_REV_REG);
+	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+
+	if (bcm63xx_cpu_id != expected_cpu_id)
+		panic("bcm63xx CPU id mismatch");
+
+	bcm63xx_cpu_freq = detect_cpu_clock();
+	bcm63xx_memory_size = detect_memory_size();
+
+	printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n",
+	       bcm63xx_cpu_id, bcm63xx_cpu_rev);
+	printk(KERN_INFO "CPU frequency is %u MHz\n",
+	       bcm63xx_cpu_freq / 1000000);
+	printk(KERN_INFO "%uMB of RAM installed\n",
+	       bcm63xx_memory_size >> 20);
+}
diff --git a/arch/mips/bcm63xx/cs.c b/arch/mips/bcm63xx/cs.c
new file mode 100644
index 00000000000..50d8190bbf7
--- /dev/null
+++ b/arch/mips/bcm63xx/cs.c
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/log2.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_cs.h>
+
+static DEFINE_SPINLOCK(bcm63xx_cs_lock);
+
+/*
+ * check if given chip select exists
+ */
+static int is_valid_cs(unsigned int cs)
+{
+	if (cs > 6)
+		return 0;
+	return 1;
+}
+
+/*
+ * Configure chipselect base address and size (bytes).
+ * Size must be a power of two between 8k and 256M.
+ */
+int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	/* sanity check on size */
+	if (size != roundup_pow_of_two(size))
+		return -EINVAL;
+
+	if (size < 8 * 1024 || size > 256 * 1024 * 1024)
+		return -EINVAL;
+
+	val = (base & MPI_CSBASE_BASE_MASK);
+	/* 8k => 0 - 256M => 15 */
+	val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	bcm_mpi_writel(val, MPI_CSBASE_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_base);
+
+/*
+ * configure chipselect timing (ns)
+ */
+int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
+			   unsigned int setup, unsigned int hold)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+	val &= ~(MPI_CSCTL_WAIT_MASK);
+	val &= ~(MPI_CSCTL_SETUP_MASK);
+	val &= ~(MPI_CSCTL_HOLD_MASK);
+	val |= wait << MPI_CSCTL_WAIT_SHIFT;
+	val |= setup << MPI_CSCTL_SETUP_SHIFT;
+	val |= hold << MPI_CSCTL_HOLD_SHIFT;
+	bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_timing);
+
+/*
+ * configure other chipselect parameter (data bus size, ...)
+ */
+int bcm63xx_set_cs_param(unsigned int cs, u32 params)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	/* none of this fields apply to pcmcia */
+	if (cs == MPI_CS_PCMCIA_COMMON ||
+	    cs == MPI_CS_PCMCIA_ATTR ||
+	    cs == MPI_CS_PCMCIA_IO)
+		return -EINVAL;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+	val &= ~(MPI_CSCTL_DATA16_MASK);
+	val &= ~(MPI_CSCTL_SYNCMODE_MASK);
+	val &= ~(MPI_CSCTL_TSIZE_MASK);
+	val &= ~(MPI_CSCTL_ENDIANSWAP_MASK);
+	val |= params;
+	bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_param);
+
+/*
+ * set cs status (enable/disable)
+ */
+int bcm63xx_set_cs_status(unsigned int cs, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (!is_valid_cs(cs))
+		return -EINVAL;
+
+	spin_lock_irqsave(&bcm63xx_cs_lock, flags);
+	val = bcm_mpi_readl(MPI_CSCTL_REG(cs));
+	if (enable)
+		val |= MPI_CSCTL_ENABLE_MASK;
+	else
+		val &= ~MPI_CSCTL_ENABLE_MASK;
+	bcm_mpi_writel(val, MPI_CSCTL_REG(cs));
+	spin_unlock_irqrestore(&bcm63xx_cs_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_set_cs_status);
diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c
new file mode 100644
index 00000000000..da46d1d3c77
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-dsp.c
@@ -0,0 +1,56 @@
+/*
+ * Broadcom BCM63xx VoIP DSP registration
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+static struct resource voip_dsp_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_voip_dsp_device = {
+	.name		= "bcm63xx-voip-dsp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(voip_dsp_resources),
+	.resource	= voip_dsp_resources,
+};
+
+int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd)
+{
+	struct bcm63xx_dsp_platform_data *dpd;
+	u32 val;
+
+	/* Get the memory window */
+	val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1));
+	val &= MPI_CSBASE_BASE_MASK;
+	voip_dsp_resources[0].start = val;
+	voip_dsp_resources[0].end = val + 0xFFFFFFF;
+	voip_dsp_resources[1].start = pd->ext_irq;
+
+	/* copy given platform data */
+	dpd = bcm63xx_voip_dsp_device.dev.platform_data;
+	memcpy(dpd, pd, sizeof (*pd));
+
+	return platform_device_register(&bcm63xx_voip_dsp_device);
+}
diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c
new file mode 100644
index 00000000000..bf353c937df
--- /dev/null
+++ b/arch/mips/bcm63xx/early_printk.c
@@ -0,0 +1,30 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static void __init wait_xfered(void)
+{
+	unsigned int val;
+
+	/* wait for any previous char to be transmitted */
+	do {
+		val = bcm_uart0_readl(UART_IR_REG);
+		if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+			break;
+	} while (1);
+}
+
+void __init prom_putchar(char c)
+{
+	wait_xfered();
+	bcm_uart0_writel(c, UART_FIFO_REG);
+	wait_xfered();
+}
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
new file mode 100644
index 00000000000..87ca3904633
--- /dev/null
+++ b/arch/mips/bcm63xx/gpio.c
@@ -0,0 +1,134 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_gpio.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+static u32 gpio_out_low, gpio_out_high;
+
+static void bcm63xx_gpio_set(struct gpio_chip *chip,
+			     unsigned gpio, int val)
+{
+	u32 reg;
+	u32 mask;
+	u32 *v;
+	unsigned long flags;
+
+	if (gpio >= chip->ngpio)
+		BUG();
+
+	if (gpio < 32) {
+		reg = GPIO_DATA_LO_REG;
+		mask = 1 << gpio;
+		v = &gpio_out_low;
+	} else {
+		reg = GPIO_DATA_HI_REG;
+		mask = 1 << (gpio - 32);
+		v = &gpio_out_high;
+	}
+
+	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+	if (val)
+		*v |= mask;
+	else
+		*v &= ~mask;
+	bcm_gpio_writel(*v, reg);
+	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+}
+
+static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 reg;
+	u32 mask;
+
+	if (gpio >= chip->ngpio)
+		BUG();
+
+	if (gpio < 32) {
+		reg = GPIO_DATA_LO_REG;
+		mask = 1 << gpio;
+	} else {
+		reg = GPIO_DATA_HI_REG;
+		mask = 1 << (gpio - 32);
+	}
+
+	return !!(bcm_gpio_readl(reg) & mask);
+}
+
+static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
+				      unsigned gpio, int dir)
+{
+	u32 reg;
+	u32 mask;
+	u32 tmp;
+	unsigned long flags;
+
+	if (gpio >= chip->ngpio)
+		BUG();
+
+	if (gpio < 32) {
+		reg = GPIO_CTL_LO_REG;
+		mask = 1 << gpio;
+	} else {
+		reg = GPIO_CTL_HI_REG;
+		mask = 1 << (gpio - 32);
+	}
+
+	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
+	tmp = bcm_gpio_readl(reg);
+	if (dir == GPIO_DIR_IN)
+		tmp &= ~mask;
+	else
+		tmp |= mask;
+	bcm_gpio_writel(tmp, reg);
+	spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags);
+
+	return 0;
+}
+
+static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN);
+}
+
+static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned gpio, int value)
+{
+	bcm63xx_gpio_set(chip, gpio, value);
+	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT);
+}
+
+
+static struct gpio_chip bcm63xx_gpio_chip = {
+	.label			= "bcm63xx-gpio",
+	.direction_input	= bcm63xx_gpio_direction_input,
+	.direction_output	= bcm63xx_gpio_direction_output,
+	.get			= bcm63xx_gpio_get,
+	.set			= bcm63xx_gpio_set,
+	.base			= 0,
+};
+
+int __init bcm63xx_gpio_init(void)
+{
+	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
+	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
+
+	return gpiochip_add(&bcm63xx_gpio_chip);
+}
+
+arch_initcall(bcm63xx_gpio_init);
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
new file mode 100644
index 00000000000..a0c5cd18c19
--- /dev/null
+++ b/arch/mips/bcm63xx/irq.c
@@ -0,0 +1,253 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_irq.h>
+
+/*
+ * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
+ * prioritize any interrupt relatively to another. the static counter
+ * will resume the loop where it ended the last time we left this
+ * function.
+ */
+static void bcm63xx_irq_dispatch_internal(void)
+{
+	u32 pending;
+	static int i;
+
+	pending = bcm_perf_readl(PERF_IRQMASK_REG) &
+		bcm_perf_readl(PERF_IRQSTAT_REG);
+
+	if (!pending)
+		return ;
+
+	while (1) {
+		int to_call = i;
+
+		i = (i + 1) & 0x1f;
+		if (pending & (1 << to_call)) {
+			do_IRQ(to_call + IRQ_INTERNAL_BASE);
+			break;
+		}
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	u32 cause;
+
+	do {
+		cause = read_c0_cause() & read_c0_status() & ST0_IM;
+
+		if (!cause)
+			break;
+
+		if (cause & CAUSEF_IP7)
+			do_IRQ(7);
+		if (cause & CAUSEF_IP2)
+			bcm63xx_irq_dispatch_internal();
+		if (cause & CAUSEF_IP3)
+			do_IRQ(IRQ_EXT_0);
+		if (cause & CAUSEF_IP4)
+			do_IRQ(IRQ_EXT_1);
+		if (cause & CAUSEF_IP5)
+			do_IRQ(IRQ_EXT_2);
+		if (cause & CAUSEF_IP6)
+			do_IRQ(IRQ_EXT_3);
+	} while (1);
+}
+
+/*
+ * internal IRQs operations: only mask/unmask on PERF irq mask
+ * register.
+ */
+static inline void bcm63xx_internal_irq_mask(unsigned int irq)
+{
+	u32 mask;
+
+	irq -= IRQ_INTERNAL_BASE;
+	mask = bcm_perf_readl(PERF_IRQMASK_REG);
+	mask &= ~(1 << irq);
+	bcm_perf_writel(mask, PERF_IRQMASK_REG);
+}
+
+static void bcm63xx_internal_irq_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	irq -= IRQ_INTERNAL_BASE;
+	mask = bcm_perf_readl(PERF_IRQMASK_REG);
+	mask |= (1 << irq);
+	bcm_perf_writel(mask, PERF_IRQMASK_REG);
+}
+
+static unsigned int bcm63xx_internal_irq_startup(unsigned int irq)
+{
+	bcm63xx_internal_irq_unmask(irq);
+	return 0;
+}
+
+/*
+ * external IRQs operations: mask/unmask and clear on PERF external
+ * irq control register.
+ */
+static void bcm63xx_external_irq_mask(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= IRQ_EXT_BASE;
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg &= ~EXTIRQ_CFG_MASK(irq);
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static void bcm63xx_external_irq_unmask(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= IRQ_EXT_BASE;
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg |= EXTIRQ_CFG_MASK(irq);
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static void bcm63xx_external_irq_clear(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= IRQ_EXT_BASE;
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg |= EXTIRQ_CFG_CLEAR(irq);
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+}
+
+static unsigned int bcm63xx_external_irq_startup(unsigned int irq)
+{
+	set_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
+	irq_enable_hazard();
+	bcm63xx_external_irq_unmask(irq);
+	return 0;
+}
+
+static void bcm63xx_external_irq_shutdown(unsigned int irq)
+{
+	bcm63xx_external_irq_mask(irq);
+	clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE));
+	irq_disable_hazard();
+}
+
+static int bcm63xx_external_irq_set_type(unsigned int irq,
+					 unsigned int flow_type)
+{
+	u32 reg;
+	struct irq_desc *desc = irq_desc + irq;
+
+	irq -= IRQ_EXT_BASE;
+
+	flow_type &= IRQ_TYPE_SENSE_MASK;
+
+	if (flow_type == IRQ_TYPE_NONE)
+		flow_type = IRQ_TYPE_LEVEL_LOW;
+
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+		reg |= EXTIRQ_CFG_BOTHEDGE(irq);
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+		reg |= EXTIRQ_CFG_SENSE(irq);
+		reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
+		reg &= ~EXTIRQ_CFG_SENSE(irq);
+		reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+		reg |= EXTIRQ_CFG_SENSE(irq);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+		reg &= ~EXTIRQ_CFG_SENSE(irq);
+		break;
+
+	default:
+		printk(KERN_ERR "bogus flow type combination given !\n");
+		return -EINVAL;
+	}
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+
+	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))  {
+		desc->status |= IRQ_LEVEL;
+		desc->handle_irq = handle_level_irq;
+	} else {
+		desc->handle_irq = handle_edge_irq;
+	}
+
+	return 0;
+}
+
+static struct irq_chip bcm63xx_internal_irq_chip = {
+	.name		= "bcm63xx_ipic",
+	.startup	= bcm63xx_internal_irq_startup,
+	.shutdown	= bcm63xx_internal_irq_mask,
+
+	.mask		= bcm63xx_internal_irq_mask,
+	.mask_ack	= bcm63xx_internal_irq_mask,
+	.unmask		= bcm63xx_internal_irq_unmask,
+};
+
+static struct irq_chip bcm63xx_external_irq_chip = {
+	.name		= "bcm63xx_epic",
+	.startup	= bcm63xx_external_irq_startup,
+	.shutdown	= bcm63xx_external_irq_shutdown,
+
+	.ack		= bcm63xx_external_irq_clear,
+
+	.mask		= bcm63xx_external_irq_mask,
+	.unmask		= bcm63xx_external_irq_unmask,
+
+	.set_type	= bcm63xx_external_irq_set_type,
+};
+
+static struct irqaction cpu_ip2_cascade_action = {
+	.handler	= no_action,
+	.name		= "cascade_ip2",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	mips_cpu_irq_init();
+	for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
+		set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip,
+					 handle_level_irq);
+
+	for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i)
+		set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip,
+					 handle_edge_irq);
+
+	setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action);
+}
diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c
new file mode 100644
index 00000000000..fb284fbc585
--- /dev/null
+++ b/arch/mips/bcm63xx/prom.c
@@ -0,0 +1,55 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_gpio.h>
+
+void __init prom_init(void)
+{
+	u32 reg, mask;
+
+	bcm63xx_cpu_init();
+
+	/* stop any running watchdog */
+	bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG);
+	bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
+
+	/* disable all hardware blocks clock for now */
+	if (BCMCPU_IS_6338())
+		mask = CKCTL_6338_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6345())
+		mask = CKCTL_6345_ALL_SAFE_EN;
+	else if (BCMCPU_IS_6348())
+		mask = CKCTL_6348_ALL_SAFE_EN;
+	else
+		/* BCMCPU_IS_6358() */
+		mask = CKCTL_6358_ALL_SAFE_EN;
+
+	reg = bcm_perf_readl(PERF_CKCTL_REG);
+	reg &= ~mask;
+	bcm_perf_writel(reg, PERF_CKCTL_REG);
+
+	/* assign command line from kernel config */
+	strcpy(arcs_cmdline, CONFIG_CMDLINE);
+
+	/* register gpiochip */
+	bcm63xx_gpio_init();
+
+	/* do low level board init */
+	board_prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
new file mode 100644
index 00000000000..b18a0ca926f
--- /dev/null
+++ b/arch/mips/bcm63xx/setup.c
@@ -0,0 +1,125 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/cacheflush.h>
+#include <bcm63xx_board.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+void bcm63xx_machine_halt(void)
+{
+	printk(KERN_INFO "System halted\n");
+	while (1)
+		;
+}
+
+static void bcm6348_a1_reboot(void)
+{
+	u32 reg;
+
+	/* soft reset all blocks */
+	printk(KERN_INFO "soft-reseting all blocks ...\n");
+	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+	reg &= ~SOFTRESET_6348_ALL;
+	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+	mdelay(10);
+
+	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
+	reg |= SOFTRESET_6348_ALL;
+	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
+	mdelay(10);
+
+	/* Jump to the power on address. */
+	printk(KERN_INFO "jumping to reset vector.\n");
+	/* set high vectors (base at 0xbfc00000 */
+	set_c0_status(ST0_BEV | ST0_ERL);
+	/* run uncached in kseg0 */
+	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+	__flush_cache_all();
+	/* remove all wired TLB entries */
+	write_c0_wired(0);
+	__asm__ __volatile__(
+		"jr\t%0"
+		:
+		: "r" (0xbfc00000));
+	while (1)
+		;
+}
+
+void bcm63xx_machine_reboot(void)
+{
+	u32 reg;
+
+	/* mask and clear all external irq */
+	reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
+	reg &= ~EXTIRQ_CFG_MASK_ALL;
+	reg |= EXTIRQ_CFG_CLEAR_ALL;
+	bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
+
+	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
+		bcm6348_a1_reboot();
+
+	printk(KERN_INFO "triggering watchdog soft-reset...\n");
+	bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG);
+	while (1)
+		;
+}
+
+static void __bcm63xx_machine_reboot(char *p)
+{
+	bcm63xx_machine_reboot();
+}
+
+/*
+ * return system type in /proc/cpuinfo
+ */
+const char *get_system_type(void)
+{
+	static char buf[128];
+	snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)",
+		 board_get_name(),
+		 bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
+	return buf;
+}
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
+}
+
+void __init plat_mem_setup(void)
+{
+	add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
+
+	_machine_halt = bcm63xx_machine_halt;
+	_machine_restart = __bcm63xx_machine_reboot;
+	pm_power_off = bcm63xx_machine_halt;
+
+	set_io_port_base(0);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+
+	board_setup();
+}
+
+int __init bcm63xx_register_devices(void)
+{
+	return board_register_devices();
+}
+
+arch_initcall(bcm63xx_register_devices);
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
new file mode 100644
index 00000000000..ba522bdcde4
--- /dev/null
+++ b/arch/mips/bcm63xx/timer.c
@@ -0,0 +1,205 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_timer.h>
+#include <bcm63xx_regs.h>
+
+static DEFINE_SPINLOCK(timer_reg_lock);
+static DEFINE_SPINLOCK(timer_data_lock);
+static struct clk *periph_clk;
+
+static struct timer_data {
+	void	(*cb)(void *);
+	void	*data;
+} timer_data[BCM63XX_TIMER_COUNT];
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	u32 stat;
+	int i;
+
+	spin_lock(&timer_reg_lock);
+	stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
+	spin_unlock(&timer_reg_lock);
+
+	for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
+		if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
+			continue;
+
+		spin_lock(&timer_data_lock);
+		if (!timer_data[i].cb) {
+			spin_unlock(&timer_data_lock);
+			continue;
+		}
+
+		timer_data[i].cb(timer_data[i].data);
+		spin_unlock(&timer_data_lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+int bcm63xx_timer_enable(int id)
+{
+	u32 reg;
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return -EINVAL;
+
+	spin_lock_irqsave(&timer_reg_lock, flags);
+
+	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+	reg |= TIMER_CTL_ENABLE_MASK;
+	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+	reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
+	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_enable);
+
+int bcm63xx_timer_disable(int id)
+{
+	u32 reg;
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return -EINVAL;
+
+	spin_lock_irqsave(&timer_reg_lock, flags);
+
+	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+	reg &= ~TIMER_CTL_ENABLE_MASK;
+	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+	reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
+	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_disable);
+
+int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
+{
+	unsigned long flags;
+	int ret;
+
+	if (id >= BCM63XX_TIMER_COUNT || !callback)
+		return -EINVAL;
+
+	ret = 0;
+	spin_lock_irqsave(&timer_data_lock, flags);
+	if (timer_data[id].cb) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	timer_data[id].cb = callback;
+	timer_data[id].data = data;
+
+out:
+	spin_unlock_irqrestore(&timer_data_lock, flags);
+	return ret;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_register);
+
+void bcm63xx_timer_unregister(int id)
+{
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return;
+
+	spin_lock_irqsave(&timer_data_lock, flags);
+	timer_data[id].cb = NULL;
+	spin_unlock_irqrestore(&timer_data_lock, flags);
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_unregister);
+
+unsigned int bcm63xx_timer_countdown(unsigned int countdown_us)
+{
+	return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_countdown);
+
+int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
+{
+	u32 reg, countdown;
+	unsigned long flags;
+
+	if (id >= BCM63XX_TIMER_COUNT)
+		return -EINVAL;
+
+	countdown = bcm63xx_timer_countdown(countdown_us);
+	if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
+		return -EINVAL;
+
+	spin_lock_irqsave(&timer_reg_lock, flags);
+	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
+
+	if (monotonic)
+		reg &= ~TIMER_CTL_MONOTONIC_MASK;
+	else
+		reg |= TIMER_CTL_MONOTONIC_MASK;
+
+	reg &= ~TIMER_CTL_COUNTDOWN_MASK;
+	reg |= countdown;
+	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
+
+	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(bcm63xx_timer_set);
+
+int bcm63xx_timer_init(void)
+{
+	int ret, irq;
+	u32 reg;
+
+	reg = bcm_timer_readl(TIMER_IRQSTAT_REG);
+	reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN;
+	reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN;
+	reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN;
+	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
+
+	periph_clk = clk_get(NULL, "periph");
+	if (IS_ERR(periph_clk))
+		return -ENODEV;
+
+	irq = bcm63xx_get_irq_number(IRQ_TIMER);
+	ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
+	if (ret) {
+		printk(KERN_ERR "bcm63xx_timer: failed to register irq\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+arch_initcall(bcm63xx_timer_init);
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
new file mode 100644
index 00000000000..ea00c18d1f7
--- /dev/null
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -0,0 +1,972 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Sun May 31 20:17:18 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+CONFIG_BCM63XX=y
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+
+#
+# CPU support
+#
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BOARD_BCM963XX=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_MMU=y
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCMCIA_BCM63XX=y
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BCM63XX_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_BCM63XX_ENET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+# CONFIG_SSB_DRIVER_PCICORE is not set
+# CONFIG_SSB_DRIVER_MIPS is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 0f5caa1307f..efeddc8db8b 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -67,11 +67,15 @@ enum fixed_addresses {
  * the start of the fixmap, and leave one page empty
  * at the top of mem..
  */
+#ifdef CONFIG_BCM63XX
+#define FIXADDR_TOP     ((unsigned long)(long)(int)0xff000000)
+#else
 #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
 #define FIXADDR_TOP	((unsigned long)(long)(int)(0xff000000 - 0x20000))
 #else
 #define FIXADDR_TOP	((unsigned long)(long)(int)0xfffe0000)
 #endif
+#endif
 #define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
 #define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
 
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
new file mode 100644
index 00000000000..fa3e7e617b0
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
@@ -0,0 +1,12 @@
+#ifndef BCM63XX_BOARD_H_
+#define BCM63XX_BOARD_H_
+
+const char *board_get_name(void);
+
+void board_prom_init(void);
+
+void board_setup(void);
+
+int board_register_devices(void);
+
+#endif /* ! BCM63XX_BOARD_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
new file mode 100644
index 00000000000..8fcf8df4418
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
@@ -0,0 +1,11 @@
+#ifndef BCM63XX_CLK_H_
+#define BCM63XX_CLK_H_
+
+struct clk {
+	void		(*set)(struct clk *, int);
+	unsigned int	rate;
+	unsigned int	usage;
+	int		id;
+};
+
+#endif /* ! BCM63XX_CLK_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
new file mode 100644
index 00000000000..b12c4aca2cc
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -0,0 +1,538 @@
+#ifndef BCM63XX_CPU_H_
+#define BCM63XX_CPU_H_
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+/*
+ * Macro to fetch bcm63xx cpu id and revision, should be optimized at
+ * compile time if only one CPU support is enabled (idea stolen from
+ * arm mach-types)
+ */
+#define BCM6338_CPU_ID		0x6338
+#define BCM6345_CPU_ID		0x6345
+#define BCM6348_CPU_ID		0x6348
+#define BCM6358_CPU_ID		0x6358
+
+void __init bcm63xx_cpu_init(void);
+u16 __bcm63xx_get_cpu_id(void);
+u16 bcm63xx_get_cpu_rev(void);
+unsigned int bcm63xx_get_cpu_freq(void);
+
+#ifdef CONFIG_BCM63XX_CPU_6338
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6338_CPU_ID
+# endif
+# define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+#else
+# define BCMCPU_IS_6338()	(0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6345
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6345_CPU_ID
+# endif
+# define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+#else
+# define BCMCPU_IS_6345()	(0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6348
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6348_CPU_ID
+# endif
+# define BCMCPU_IS_6348()	(bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
+#else
+# define BCMCPU_IS_6348()	(0)
+#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6358
+# ifdef bcm63xx_get_cpu_id
+#  undef bcm63xx_get_cpu_id
+#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+#  define BCMCPU_RUNTIME_DETECT
+# else
+#  define bcm63xx_get_cpu_id()	BCM6358_CPU_ID
+# endif
+# define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+#else
+# define BCMCPU_IS_6358()	(0)
+#endif
+
+#ifndef bcm63xx_get_cpu_id
+#error "No CPU support configured"
+#endif
+
+/*
+ * While registers sets are (mostly) the same across 63xx CPU, base
+ * address of these sets do change.
+ */
+enum bcm63xx_regs_set {
+	RSET_DSL_LMEM = 0,
+	RSET_PERF,
+	RSET_TIMER,
+	RSET_WDT,
+	RSET_UART0,
+	RSET_GPIO,
+	RSET_SPI,
+	RSET_UDC0,
+	RSET_OHCI0,
+	RSET_OHCI_PRIV,
+	RSET_USBH_PRIV,
+	RSET_MPI,
+	RSET_PCMCIA,
+	RSET_DSL,
+	RSET_ENET0,
+	RSET_ENET1,
+	RSET_ENETDMA,
+	RSET_EHCI0,
+	RSET_SDRAM,
+	RSET_MEMC,
+	RSET_DDR,
+};
+
+#define RSET_DSL_LMEM_SIZE		(64 * 1024 * 4)
+#define RSET_DSL_SIZE			4096
+#define RSET_WDT_SIZE			12
+#define RSET_ENET_SIZE			2048
+#define RSET_ENETDMA_SIZE		2048
+#define RSET_UART_SIZE			24
+#define RSET_UDC_SIZE			256
+#define RSET_OHCI_SIZE			256
+#define RSET_EHCI_SIZE			256
+#define RSET_PCMCIA_SIZE		12
+
+/*
+ * 6338 register sets base address
+ */
+#define BCM_6338_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6338_PERF_BASE		(0xfffe0000)
+#define BCM_6338_BB_BASE		(0xfffe0100)
+#define BCM_6338_TIMER_BASE		(0xfffe0200)
+#define BCM_6338_WDT_BASE		(0xfffe021c)
+#define BCM_6338_UART0_BASE		(0xfffe0300)
+#define BCM_6338_GPIO_BASE		(0xfffe0400)
+#define BCM_6338_SPI_BASE		(0xfffe0c00)
+#define BCM_6338_UDC0_BASE		(0xdeadbeef)
+#define BCM_6338_USBDMA_BASE		(0xfffe2400)
+#define BCM_6338_OHCI0_BASE		(0xdeadbeef)
+#define BCM_6338_OHCI_PRIV_BASE		(0xfffe3000)
+#define BCM_6338_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_6338_MPI_BASE		(0xfffe3160)
+#define BCM_6338_PCMCIA_BASE		(0xdeadbeef)
+#define BCM_6338_SDRAM_REGS_BASE	(0xfffe3100)
+#define BCM_6338_DSL_BASE		(0xfffe1000)
+#define BCM_6338_SAR_BASE		(0xfffe2000)
+#define BCM_6338_UBUS_BASE		(0xdeadbeef)
+#define BCM_6338_ENET0_BASE		(0xfffe2800)
+#define BCM_6338_ENET1_BASE		(0xdeadbeef)
+#define BCM_6338_ENETDMA_BASE		(0xfffe2400)
+#define BCM_6338_EHCI0_BASE		(0xdeadbeef)
+#define BCM_6338_SDRAM_BASE		(0xfffe3100)
+#define BCM_6338_MEMC_BASE		(0xdeadbeef)
+#define BCM_6338_DDR_BASE		(0xdeadbeef)
+
+/*
+ * 6345 register sets base address
+ */
+#define BCM_6345_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6345_PERF_BASE		(0xfffe0000)
+#define BCM_6345_BB_BASE		(0xfffe0100)
+#define BCM_6345_TIMER_BASE		(0xfffe0200)
+#define BCM_6345_WDT_BASE		(0xfffe021c)
+#define BCM_6345_UART0_BASE		(0xfffe0300)
+#define BCM_6345_GPIO_BASE		(0xfffe0400)
+#define BCM_6345_SPI_BASE		(0xdeadbeef)
+#define BCM_6345_UDC0_BASE		(0xdeadbeef)
+#define BCM_6345_USBDMA_BASE		(0xfffe2800)
+#define BCM_6345_ENET0_BASE		(0xfffe1800)
+#define BCM_6345_ENETDMA_BASE		(0xfffe2800)
+#define BCM_6345_PCMCIA_BASE		(0xfffe2028)
+#define BCM_6345_MPI_BASE		(0xdeadbeef)
+#define BCM_6345_OHCI0_BASE		(0xfffe2100)
+#define BCM_6345_OHCI_PRIV_BASE		(0xfffe2200)
+#define BCM_6345_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_6345_SDRAM_REGS_BASE	(0xfffe2300)
+#define BCM_6345_DSL_BASE		(0xdeadbeef)
+#define BCM_6345_SAR_BASE		(0xdeadbeef)
+#define BCM_6345_UBUS_BASE		(0xdeadbeef)
+#define BCM_6345_ENET1_BASE		(0xdeadbeef)
+#define BCM_6345_EHCI0_BASE		(0xdeadbeef)
+#define BCM_6345_SDRAM_BASE		(0xfffe2300)
+#define BCM_6345_MEMC_BASE		(0xdeadbeef)
+#define BCM_6345_DDR_BASE		(0xdeadbeef)
+
+/*
+ * 6348 register sets base address
+ */
+#define BCM_6348_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6348_PERF_BASE		(0xfffe0000)
+#define BCM_6348_TIMER_BASE		(0xfffe0200)
+#define BCM_6348_WDT_BASE		(0xfffe021c)
+#define BCM_6348_UART0_BASE		(0xfffe0300)
+#define BCM_6348_GPIO_BASE		(0xfffe0400)
+#define BCM_6348_SPI_BASE		(0xfffe0c00)
+#define BCM_6348_UDC0_BASE		(0xfffe1000)
+#define BCM_6348_OHCI0_BASE		(0xfffe1b00)
+#define BCM_6348_OHCI_PRIV_BASE		(0xfffe1c00)
+#define BCM_6348_USBH_PRIV_BASE		(0xdeadbeef)
+#define BCM_6348_MPI_BASE		(0xfffe2000)
+#define BCM_6348_PCMCIA_BASE		(0xfffe2054)
+#define BCM_6348_SDRAM_REGS_BASE	(0xfffe2300)
+#define BCM_6348_DSL_BASE		(0xfffe3000)
+#define BCM_6348_ENET0_BASE		(0xfffe6000)
+#define BCM_6348_ENET1_BASE		(0xfffe6800)
+#define BCM_6348_ENETDMA_BASE		(0xfffe7000)
+#define BCM_6348_EHCI0_BASE		(0xdeadbeef)
+#define BCM_6348_SDRAM_BASE		(0xfffe2300)
+#define BCM_6348_MEMC_BASE		(0xdeadbeef)
+#define BCM_6348_DDR_BASE		(0xdeadbeef)
+
+/*
+ * 6358 register sets base address
+ */
+#define BCM_6358_DSL_LMEM_BASE		(0xfff00000)
+#define BCM_6358_PERF_BASE		(0xfffe0000)
+#define BCM_6358_TIMER_BASE		(0xfffe0040)
+#define BCM_6358_WDT_BASE		(0xfffe005c)
+#define BCM_6358_UART0_BASE		(0xfffe0100)
+#define BCM_6358_GPIO_BASE		(0xfffe0080)
+#define BCM_6358_SPI_BASE		(0xdeadbeef)
+#define BCM_6358_UDC0_BASE		(0xfffe0800)
+#define BCM_6358_OHCI0_BASE		(0xfffe1400)
+#define BCM_6358_OHCI_PRIV_BASE		(0xdeadbeef)
+#define BCM_6358_USBH_PRIV_BASE		(0xfffe1500)
+#define BCM_6358_MPI_BASE		(0xfffe1000)
+#define BCM_6358_PCMCIA_BASE		(0xfffe1054)
+#define BCM_6358_SDRAM_REGS_BASE	(0xfffe2300)
+#define BCM_6358_DSL_BASE		(0xfffe3000)
+#define BCM_6358_ENET0_BASE		(0xfffe4000)
+#define BCM_6358_ENET1_BASE		(0xfffe4800)
+#define BCM_6358_ENETDMA_BASE		(0xfffe5000)
+#define BCM_6358_EHCI0_BASE		(0xfffe1300)
+#define BCM_6358_SDRAM_BASE		(0xdeadbeef)
+#define BCM_6358_MEMC_BASE		(0xfffe1200)
+#define BCM_6358_DDR_BASE		(0xfffe12a0)
+
+
+extern const unsigned long *bcm63xx_regs_base;
+
+static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
+{
+#ifdef BCMCPU_RUNTIME_DETECT
+	return bcm63xx_regs_base[set];
+#else
+#ifdef CONFIG_BCM63XX_CPU_6338
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6338_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6338_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6338_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6338_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6338_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6338_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6338_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6338_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6338_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6338_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6338_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6338_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6338_PCMCIA_BASE;
+	case RSET_DSL:
+		return BCM_6338_DSL_BASE;
+	case RSET_ENET0:
+		return BCM_6338_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6338_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6338_ENETDMA_BASE;
+	case RSET_EHCI0:
+		return BCM_6338_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6338_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6338_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6338_DDR_BASE;
+	}
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6345
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6345_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6345_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6345_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6345_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6345_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6345_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6345_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6345_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6345_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6345_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6345_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6345_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6345_PCMCIA_BASE;
+	case RSET_DSL:
+		return BCM_6345_DSL_BASE;
+	case RSET_ENET0:
+		return BCM_6345_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6345_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6345_ENETDMA_BASE;
+	case RSET_EHCI0:
+		return BCM_6345_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6345_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6345_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6345_DDR_BASE;
+	}
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6348
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6348_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6348_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6348_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6348_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6348_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6348_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6348_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6348_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6348_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6348_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6348_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6348_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6348_PCMCIA_BASE;
+	case RSET_DSL:
+		return BCM_6348_DSL_BASE;
+	case RSET_ENET0:
+		return BCM_6348_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6348_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6348_ENETDMA_BASE;
+	case RSET_EHCI0:
+		return BCM_6348_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6348_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6348_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6348_DDR_BASE;
+	}
+#endif
+#ifdef CONFIG_BCM63XX_CPU_6358
+	switch (set) {
+	case RSET_DSL_LMEM:
+		return BCM_6358_DSL_LMEM_BASE;
+	case RSET_PERF:
+		return BCM_6358_PERF_BASE;
+	case RSET_TIMER:
+		return BCM_6358_TIMER_BASE;
+	case RSET_WDT:
+		return BCM_6358_WDT_BASE;
+	case RSET_UART0:
+		return BCM_6358_UART0_BASE;
+	case RSET_GPIO:
+		return BCM_6358_GPIO_BASE;
+	case RSET_SPI:
+		return BCM_6358_SPI_BASE;
+	case RSET_UDC0:
+		return BCM_6358_UDC0_BASE;
+	case RSET_OHCI0:
+		return BCM_6358_OHCI0_BASE;
+	case RSET_OHCI_PRIV:
+		return BCM_6358_OHCI_PRIV_BASE;
+	case RSET_USBH_PRIV:
+		return BCM_6358_USBH_PRIV_BASE;
+	case RSET_MPI:
+		return BCM_6358_MPI_BASE;
+	case RSET_PCMCIA:
+		return BCM_6358_PCMCIA_BASE;
+	case RSET_ENET0:
+		return BCM_6358_ENET0_BASE;
+	case RSET_ENET1:
+		return BCM_6358_ENET1_BASE;
+	case RSET_ENETDMA:
+		return BCM_6358_ENETDMA_BASE;
+	case RSET_DSL:
+		return BCM_6358_DSL_BASE;
+	case RSET_EHCI0:
+		return BCM_6358_EHCI0_BASE;
+	case RSET_SDRAM:
+		return BCM_6358_SDRAM_BASE;
+	case RSET_MEMC:
+		return BCM_6358_MEMC_BASE;
+	case RSET_DDR:
+		return BCM_6358_DDR_BASE;
+	}
+#endif
+#endif
+	/* unreached */
+	return 0;
+}
+
+/*
+ * IRQ number changes across CPU too
+ */
+enum bcm63xx_irq {
+	IRQ_TIMER = 0,
+	IRQ_UART0,
+	IRQ_DSL,
+	IRQ_ENET0,
+	IRQ_ENET1,
+	IRQ_ENET_PHY,
+	IRQ_OHCI0,
+	IRQ_EHCI0,
+	IRQ_PCMCIA0,
+	IRQ_ENET0_RXDMA,
+	IRQ_ENET0_TXDMA,
+	IRQ_ENET1_RXDMA,
+	IRQ_ENET1_TXDMA,
+	IRQ_PCI,
+	IRQ_PCMCIA,
+};
+
+/*
+ * 6338 irqs
+ */
+#define BCM_6338_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6338_SPI_IRQ		(IRQ_INTERNAL_BASE + 1)
+#define BCM_6338_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6338_DG_IRQ			(IRQ_INTERNAL_BASE + 4)
+#define BCM_6338_DSL_IRQ		(IRQ_INTERNAL_BASE + 5)
+#define BCM_6338_ATM_IRQ		(IRQ_INTERNAL_BASE + 6)
+#define BCM_6338_UDC0_IRQ		(IRQ_INTERNAL_BASE + 7)
+#define BCM_6338_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6338_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_SDRAM_IRQ		(IRQ_INTERNAL_BASE + 10)
+#define BCM_6338_USB_CNTL_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 11)
+#define BCM_6338_USB_CNTL_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 12)
+#define BCM_6338_USB_BULK_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13)
+#define BCM_6338_USB_BULK_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 14)
+#define BCM_6338_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 15)
+#define BCM_6338_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 16)
+#define BCM_6338_SDIO_IRQ		(IRQ_INTERNAL_BASE + 17)
+
+/*
+ * 6345 irqs
+ */
+#define BCM_6345_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6345_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6345_DSL_IRQ		(IRQ_INTERNAL_BASE + 3)
+#define BCM_6345_ATM_IRQ		(IRQ_INTERNAL_BASE + 4)
+#define BCM_6345_USB_IRQ		(IRQ_INTERNAL_BASE + 5)
+#define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 1)
+#define BCM_6345_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 2)
+#define BCM_6345_EBI_RX_IRQ		(IRQ_INTERNAL_BASE + 13 + 5)
+#define BCM_6345_EBI_TX_IRQ		(IRQ_INTERNAL_BASE + 13 + 6)
+#define BCM_6345_RESERVED_RX_IRQ	(IRQ_INTERNAL_BASE + 13 + 9)
+#define BCM_6345_RESERVED_TX_IRQ	(IRQ_INTERNAL_BASE + 13 + 10)
+#define BCM_6345_USB_BULK_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 13)
+#define BCM_6345_USB_BULK_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 14)
+#define BCM_6345_USB_CNTL_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 15)
+#define BCM_6345_USB_CNTL_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 16)
+#define BCM_6345_USB_ISO_RX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 17)
+#define BCM_6345_USB_ISO_TX_DMA_IRQ	(IRQ_INTERNAL_BASE + 13 + 18)
+
+/*
+ * 6348 irqs
+ */
+#define BCM_6348_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6348_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6348_DSL_IRQ		(IRQ_INTERNAL_BASE + 4)
+#define BCM_6348_ENET1_IRQ		(IRQ_INTERNAL_BASE + 7)
+#define BCM_6348_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6348_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6348_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6348_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 20)
+#define BCM_6348_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 21)
+#define BCM_6348_ENET1_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 22)
+#define BCM_6348_ENET1_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 23)
+#define BCM_6348_PCMCIA_IRQ		(IRQ_INTERNAL_BASE + 24)
+#define BCM_6348_PCI_IRQ		(IRQ_INTERNAL_BASE + 24)
+
+/*
+ * 6358 irqs
+ */
+#define BCM_6358_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
+#define BCM_6358_UART0_IRQ		(IRQ_INTERNAL_BASE + 2)
+#define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
+#define BCM_6358_ENET1_IRQ		(IRQ_INTERNAL_BASE + 6)
+#define BCM_6358_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
+#define BCM_6358_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6358_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
+#define BCM_6358_ENET0_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 15)
+#define BCM_6358_ENET0_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 16)
+#define BCM_6358_ENET1_RXDMA_IRQ	(IRQ_INTERNAL_BASE + 17)
+#define BCM_6358_ENET1_TXDMA_IRQ	(IRQ_INTERNAL_BASE + 18)
+#define BCM_6358_DSL_IRQ		(IRQ_INTERNAL_BASE + 29)
+#define BCM_6358_PCI_IRQ		(IRQ_INTERNAL_BASE + 31)
+#define BCM_6358_PCMCIA_IRQ		(IRQ_INTERNAL_BASE + 24)
+
+extern const int *bcm63xx_irqs;
+
+static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq)
+{
+	return bcm63xx_irqs[irq];
+}
+
+/*
+ * return installed memory size
+ */
+unsigned int bcm63xx_get_memory_size(void);
+
+#endif /* !BCM63XX_CPU_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
new file mode 100644
index 00000000000..b1821c866e5
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
@@ -0,0 +1,10 @@
+#ifndef BCM63XX_CS_H
+#define BCM63XX_CS_H
+
+int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size);
+int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait,
+			   unsigned int setup, unsigned int hold);
+int bcm63xx_set_cs_param(unsigned int cs, u32 flags);
+int bcm63xx_set_cs_status(unsigned int cs, int enable);
+
+#endif /* !BCM63XX_CS_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
new file mode 100644
index 00000000000..b587d45c304
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h
@@ -0,0 +1,13 @@
+#ifndef __BCM63XX_DSP_H
+#define __BCM63XX_DSP_H
+
+struct bcm63xx_dsp_platform_data {
+	unsigned gpio_rst;
+	unsigned gpio_int;
+	unsigned cs;
+	unsigned ext_irq;
+};
+
+int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd);
+
+#endif /* __BCM63XX_DSP_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
new file mode 100644
index 00000000000..d53f611184b
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
@@ -0,0 +1,45 @@
+#ifndef BCM63XX_DEV_ENET_H_
+#define BCM63XX_DEV_ENET_H_
+
+#include <linux/if_ether.h>
+#include <linux/init.h>
+
+/*
+ * on board ethernet platform data
+ */
+struct bcm63xx_enet_platform_data {
+	char mac_addr[ETH_ALEN];
+
+	int has_phy;
+
+	/* if has_phy, then set use_internal_phy */
+	int use_internal_phy;
+
+	/* or fill phy info to use an external one */
+	int phy_id;
+	int has_phy_interrupt;
+	int phy_interrupt;
+
+	/* if has_phy, use autonegociated pause parameters or force
+	 * them */
+	int pause_auto;
+	int pause_rx;
+	int pause_tx;
+
+	/* if !has_phy, set desired forced speed/duplex */
+	int force_speed_100;
+	int force_duplex_full;
+
+	/* if !has_phy, set callback to perform mii device
+	 * init/remove */
+	int (*mii_config)(struct net_device *dev, int probe,
+			  int (*mii_read)(struct net_device *dev,
+					  int phy_id, int reg),
+			  void (*mii_write)(struct net_device *dev,
+					    int phy_id, int reg, int val));
+};
+
+int __init bcm63xx_enet_register(int unit,
+				 const struct bcm63xx_enet_platform_data *pd);
+
+#endif /* ! BCM63XX_DEV_ENET_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
new file mode 100644
index 00000000000..c549344b70a
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_PCI_H_
+#define BCM63XX_DEV_PCI_H_
+
+extern int bcm63xx_pci_enabled;
+
+#endif /* BCM63XX_DEV_PCI_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
new file mode 100644
index 00000000000..76a0b7216af
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
@@ -0,0 +1,22 @@
+#ifndef BCM63XX_GPIO_H
+#define BCM63XX_GPIO_H
+
+#include <linux/init.h>
+
+int __init bcm63xx_gpio_init(void);
+
+static inline unsigned long bcm63xx_gpio_count(void)
+{
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6358_CPU_ID:
+		return 40;
+	case BCM6348_CPU_ID:
+	default:
+		return 37;
+	}
+}
+
+#define GPIO_DIR_OUT	0x0
+#define GPIO_DIR_IN	0x1
+
+#endif /* !BCM63XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
new file mode 100644
index 00000000000..91180fac6ed
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
@@ -0,0 +1,93 @@
+#ifndef BCM63XX_IO_H_
+#define BCM63XX_IO_H_
+
+#include "bcm63xx_cpu.h"
+
+/*
+ * Physical memory map, RAM is mapped at 0x0.
+ *
+ * Note that size MUST be a power of two.
+ */
+#define BCM_PCMCIA_COMMON_BASE_PA	(0x20000000)
+#define BCM_PCMCIA_COMMON_SIZE		(16 * 1024 * 1024)
+#define BCM_PCMCIA_COMMON_END_PA	(BCM_PCMCIA_COMMON_BASE_PA +	\
+					 BCM_PCMCIA_COMMON_SIZE - 1)
+
+#define BCM_PCMCIA_ATTR_BASE_PA		(0x21000000)
+#define BCM_PCMCIA_ATTR_SIZE		(16 * 1024 * 1024)
+#define BCM_PCMCIA_ATTR_END_PA		(BCM_PCMCIA_ATTR_BASE_PA +	\
+					 BCM_PCMCIA_ATTR_SIZE - 1)
+
+#define BCM_PCMCIA_IO_BASE_PA		(0x22000000)
+#define BCM_PCMCIA_IO_SIZE		(64 * 1024)
+#define BCM_PCMCIA_IO_END_PA		(BCM_PCMCIA_IO_BASE_PA +	\
+					BCM_PCMCIA_IO_SIZE - 1)
+
+#define BCM_PCI_MEM_BASE_PA		(0x30000000)
+#define BCM_PCI_MEM_SIZE		(128 * 1024 * 1024)
+#define BCM_PCI_MEM_END_PA		(BCM_PCI_MEM_BASE_PA +		\
+					BCM_PCI_MEM_SIZE - 1)
+
+#define BCM_PCI_IO_BASE_PA		(0x08000000)
+#define BCM_PCI_IO_SIZE			(64 * 1024)
+#define BCM_PCI_IO_END_PA		(BCM_PCI_IO_BASE_PA +		\
+					BCM_PCI_IO_SIZE - 1)
+#define BCM_PCI_IO_HALF_PA		(BCM_PCI_IO_BASE_PA +		\
+					(BCM_PCI_IO_SIZE / 2) - 1)
+
+#define BCM_CB_MEM_BASE_PA		(0x38000000)
+#define BCM_CB_MEM_SIZE			(128 * 1024 * 1024)
+#define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
+					BCM_CB_MEM_SIZE - 1)
+
+
+/*
+ * Internal registers are accessed through KSEG3
+ */
+#define BCM_REGS_VA(x)	((void __iomem *)(x))
+
+#define bcm_readb(a)	(*(volatile unsigned char *)	BCM_REGS_VA(a))
+#define bcm_readw(a)	(*(volatile unsigned short *)	BCM_REGS_VA(a))
+#define bcm_readl(a)	(*(volatile unsigned int *)	BCM_REGS_VA(a))
+#define bcm_writeb(v, a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v))
+#define bcm_writew(v, a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v))
+#define bcm_writel(v, a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v))
+
+/*
+ * IO helpers to access register set for current CPU
+ */
+#define bcm_rset_readb(s, o)	bcm_readb(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_readw(s, o)	bcm_readw(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_readl(s, o)	bcm_readl(bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writeb(s, v, o)	bcm_writeb((v), \
+					bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writew(s, v, o)	bcm_writew((v), \
+					bcm63xx_regset_address(s) + (o))
+#define bcm_rset_writel(s, v, o)	bcm_writel((v), \
+					bcm63xx_regset_address(s) + (o))
+
+/*
+ * helpers for frequently used register sets
+ */
+#define bcm_perf_readl(o)	bcm_rset_readl(RSET_PERF, (o))
+#define bcm_perf_writel(v, o)	bcm_rset_writel(RSET_PERF, (v), (o))
+#define bcm_timer_readl(o)	bcm_rset_readl(RSET_TIMER, (o))
+#define bcm_timer_writel(v, o)	bcm_rset_writel(RSET_TIMER, (v), (o))
+#define bcm_wdt_readl(o)	bcm_rset_readl(RSET_WDT, (o))
+#define bcm_wdt_writel(v, o)	bcm_rset_writel(RSET_WDT, (v), (o))
+#define bcm_gpio_readl(o)	bcm_rset_readl(RSET_GPIO, (o))
+#define bcm_gpio_writel(v, o)	bcm_rset_writel(RSET_GPIO, (v), (o))
+#define bcm_uart0_readl(o)	bcm_rset_readl(RSET_UART0, (o))
+#define bcm_uart0_writel(v, o)	bcm_rset_writel(RSET_UART0, (v), (o))
+#define bcm_mpi_readl(o)	bcm_rset_readl(RSET_MPI, (o))
+#define bcm_mpi_writel(v, o)	bcm_rset_writel(RSET_MPI, (v), (o))
+#define bcm_pcmcia_readl(o)	bcm_rset_readl(RSET_PCMCIA, (o))
+#define bcm_pcmcia_writel(v, o)	bcm_rset_writel(RSET_PCMCIA, (v), (o))
+#define bcm_sdram_readl(o)	bcm_rset_readl(RSET_SDRAM, (o))
+#define bcm_sdram_writel(v, o)	bcm_rset_writel(RSET_SDRAM, (v), (o))
+#define bcm_memc_readl(o)	bcm_rset_readl(RSET_MEMC, (o))
+#define bcm_memc_writel(v, o)	bcm_rset_writel(RSET_MEMC, (v), (o))
+#define bcm_ddr_readl(o)	bcm_rset_readl(RSET_DDR, (o))
+#define bcm_ddr_writel(v, o)	bcm_rset_writel(RSET_DDR, (v), (o))
+
+#endif /* ! BCM63XX_IO_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
new file mode 100644
index 00000000000..5f95577c821
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
@@ -0,0 +1,15 @@
+#ifndef BCM63XX_IRQ_H_
+#define BCM63XX_IRQ_H_
+
+#include <bcm63xx_cpu.h>
+
+#define IRQ_MIPS_BASE			0
+#define IRQ_INTERNAL_BASE		8
+
+#define IRQ_EXT_BASE			(IRQ_MIPS_BASE + 3)
+#define IRQ_EXT_0			(IRQ_EXT_BASE + 0)
+#define IRQ_EXT_1			(IRQ_EXT_BASE + 1)
+#define IRQ_EXT_2			(IRQ_EXT_BASE + 2)
+#define IRQ_EXT_3			(IRQ_EXT_BASE + 3)
+
+#endif /* ! BCM63XX_IRQ_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
new file mode 100644
index 00000000000..ed4ccec87dd
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -0,0 +1,773 @@
+#ifndef BCM63XX_REGS_H_
+#define BCM63XX_REGS_H_
+
+/*************************************************************************
+ * _REG relative to RSET_PERF
+ *************************************************************************/
+
+/* Chip Identifier / Revision register */
+#define PERF_REV_REG			0x0
+#define REV_CHIPID_SHIFT		16
+#define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
+#define REV_REVID_SHIFT			0
+#define REV_REVID_MASK			(0xffff << REV_REVID_SHIFT)
+
+/* Clock Control register */
+#define PERF_CKCTL_REG			0x4
+
+#define CKCTL_6338_ADSLPHY_EN		(1 << 0)
+#define CKCTL_6338_MPI_EN		(1 << 1)
+#define CKCTL_6338_DRAM_EN		(1 << 2)
+#define CKCTL_6338_ENET_EN		(1 << 4)
+#define CKCTL_6338_USBS_EN		(1 << 4)
+#define CKCTL_6338_SAR_EN		(1 << 5)
+#define CKCTL_6338_SPI_EN		(1 << 9)
+
+#define CKCTL_6338_ALL_SAFE_EN		(CKCTL_6338_ADSLPHY_EN |	\
+					CKCTL_6338_MPI_EN |		\
+					CKCTL_6338_ENET_EN |		\
+					CKCTL_6338_SAR_EN |		\
+					CKCTL_6338_SPI_EN)
+
+#define CKCTL_6345_CPU_EN		(1 << 0)
+#define CKCTL_6345_BUS_EN		(1 << 1)
+#define CKCTL_6345_EBI_EN		(1 << 2)
+#define CKCTL_6345_UART_EN		(1 << 3)
+#define CKCTL_6345_ADSLPHY_EN		(1 << 4)
+#define CKCTL_6345_ENET_EN		(1 << 7)
+#define CKCTL_6345_USBH_EN		(1 << 8)
+
+#define CKCTL_6345_ALL_SAFE_EN		(CKCTL_6345_ENET_EN |	\
+					CKCTL_6345_USBH_EN |	\
+					CKCTL_6345_ADSLPHY_EN)
+
+#define CKCTL_6348_ADSLPHY_EN		(1 << 0)
+#define CKCTL_6348_MPI_EN		(1 << 1)
+#define CKCTL_6348_SDRAM_EN		(1 << 2)
+#define CKCTL_6348_M2M_EN		(1 << 3)
+#define CKCTL_6348_ENET_EN		(1 << 4)
+#define CKCTL_6348_SAR_EN		(1 << 5)
+#define CKCTL_6348_USBS_EN		(1 << 6)
+#define CKCTL_6348_USBH_EN		(1 << 8)
+#define CKCTL_6348_SPI_EN		(1 << 9)
+
+#define CKCTL_6348_ALL_SAFE_EN		(CKCTL_6348_ADSLPHY_EN |	\
+					CKCTL_6348_M2M_EN |		\
+					CKCTL_6348_ENET_EN |		\
+					CKCTL_6348_SAR_EN |		\
+					CKCTL_6348_USBS_EN |		\
+					CKCTL_6348_USBH_EN |		\
+					CKCTL_6348_SPI_EN)
+
+#define CKCTL_6358_ENET_EN		(1 << 4)
+#define CKCTL_6358_ADSLPHY_EN		(1 << 5)
+#define CKCTL_6358_PCM_EN		(1 << 8)
+#define CKCTL_6358_SPI_EN		(1 << 9)
+#define CKCTL_6358_USBS_EN		(1 << 10)
+#define CKCTL_6358_SAR_EN		(1 << 11)
+#define CKCTL_6358_EMUSB_EN		(1 << 17)
+#define CKCTL_6358_ENET0_EN		(1 << 18)
+#define CKCTL_6358_ENET1_EN		(1 << 19)
+#define CKCTL_6358_USBSU_EN		(1 << 20)
+#define CKCTL_6358_EPHY_EN		(1 << 21)
+
+#define CKCTL_6358_ALL_SAFE_EN		(CKCTL_6358_ENET_EN |		\
+					CKCTL_6358_ADSLPHY_EN |		\
+					CKCTL_6358_PCM_EN |		\
+					CKCTL_6358_SPI_EN |		\
+					CKCTL_6358_USBS_EN |		\
+					CKCTL_6358_SAR_EN |		\
+					CKCTL_6358_EMUSB_EN |		\
+					CKCTL_6358_ENET0_EN |		\
+					CKCTL_6358_ENET1_EN |		\
+					CKCTL_6358_USBSU_EN |		\
+					CKCTL_6358_EPHY_EN)
+
+/* System PLL Control register  */
+#define PERF_SYS_PLL_CTL_REG		0x8
+#define SYS_PLL_SOFT_RESET		0x1
+
+/* Interrupt Mask register */
+#define PERF_IRQMASK_REG		0xc
+#define PERF_IRQSTAT_REG		0x10
+
+/* Interrupt Status register */
+#define PERF_IRQSTAT_REG		0x10
+
+/* External Interrupt Configuration register */
+#define PERF_EXTIRQ_CFG_REG		0x14
+#define EXTIRQ_CFG_SENSE(x)		(1 << (x))
+#define EXTIRQ_CFG_STAT(x)		(1 << (x + 5))
+#define EXTIRQ_CFG_CLEAR(x)		(1 << (x + 10))
+#define EXTIRQ_CFG_MASK(x)		(1 << (x + 15))
+#define EXTIRQ_CFG_BOTHEDGE(x)		(1 << (x + 20))
+#define EXTIRQ_CFG_LEVELSENSE(x)	(1 << (x + 25))
+
+#define EXTIRQ_CFG_CLEAR_ALL		(0xf << 10)
+#define EXTIRQ_CFG_MASK_ALL		(0xf << 15)
+
+/* Soft Reset register */
+#define PERF_SOFTRESET_REG		0x28
+
+#define SOFTRESET_6338_SPI_MASK		(1 << 0)
+#define SOFTRESET_6338_ENET_MASK	(1 << 2)
+#define SOFTRESET_6338_USBH_MASK	(1 << 3)
+#define SOFTRESET_6338_USBS_MASK	(1 << 4)
+#define SOFTRESET_6338_ADSL_MASK	(1 << 5)
+#define SOFTRESET_6338_DMAMEM_MASK	(1 << 6)
+#define SOFTRESET_6338_SAR_MASK		(1 << 7)
+#define SOFTRESET_6338_ACLC_MASK	(1 << 8)
+#define SOFTRESET_6338_ADSLMIPSPLL_MASK	(1 << 10)
+#define SOFTRESET_6338_ALL	 (SOFTRESET_6338_SPI_MASK |		\
+				  SOFTRESET_6338_ENET_MASK |		\
+				  SOFTRESET_6338_USBH_MASK |		\
+				  SOFTRESET_6338_USBS_MASK |		\
+				  SOFTRESET_6338_ADSL_MASK |		\
+				  SOFTRESET_6338_DMAMEM_MASK |		\
+				  SOFTRESET_6338_SAR_MASK |		\
+				  SOFTRESET_6338_ACLC_MASK |		\
+				  SOFTRESET_6338_ADSLMIPSPLL_MASK)
+
+#define SOFTRESET_6348_SPI_MASK		(1 << 0)
+#define SOFTRESET_6348_ENET_MASK	(1 << 2)
+#define SOFTRESET_6348_USBH_MASK	(1 << 3)
+#define SOFTRESET_6348_USBS_MASK	(1 << 4)
+#define SOFTRESET_6348_ADSL_MASK	(1 << 5)
+#define SOFTRESET_6348_DMAMEM_MASK	(1 << 6)
+#define SOFTRESET_6348_SAR_MASK		(1 << 7)
+#define SOFTRESET_6348_ACLC_MASK	(1 << 8)
+#define SOFTRESET_6348_ADSLMIPSPLL_MASK	(1 << 10)
+
+#define SOFTRESET_6348_ALL	 (SOFTRESET_6348_SPI_MASK |		\
+				  SOFTRESET_6348_ENET_MASK |		\
+				  SOFTRESET_6348_USBH_MASK |		\
+				  SOFTRESET_6348_USBS_MASK |		\
+				  SOFTRESET_6348_ADSL_MASK |		\
+				  SOFTRESET_6348_DMAMEM_MASK |		\
+				  SOFTRESET_6348_SAR_MASK |		\
+				  SOFTRESET_6348_ACLC_MASK |		\
+				  SOFTRESET_6348_ADSLMIPSPLL_MASK)
+
+/* MIPS PLL control register */
+#define PERF_MIPSPLLCTL_REG		0x34
+#define MIPSPLLCTL_N1_SHIFT		20
+#define MIPSPLLCTL_N1_MASK		(0x7 << MIPSPLLCTL_N1_SHIFT)
+#define MIPSPLLCTL_N2_SHIFT		15
+#define MIPSPLLCTL_N2_MASK		(0x1f << MIPSPLLCTL_N2_SHIFT)
+#define MIPSPLLCTL_M1REF_SHIFT		12
+#define MIPSPLLCTL_M1REF_MASK		(0x7 << MIPSPLLCTL_M1REF_SHIFT)
+#define MIPSPLLCTL_M2REF_SHIFT		9
+#define MIPSPLLCTL_M2REF_MASK		(0x7 << MIPSPLLCTL_M2REF_SHIFT)
+#define MIPSPLLCTL_M1CPU_SHIFT		6
+#define MIPSPLLCTL_M1CPU_MASK		(0x7 << MIPSPLLCTL_M1CPU_SHIFT)
+#define MIPSPLLCTL_M1BUS_SHIFT		3
+#define MIPSPLLCTL_M1BUS_MASK		(0x7 << MIPSPLLCTL_M1BUS_SHIFT)
+#define MIPSPLLCTL_M2BUS_SHIFT		0
+#define MIPSPLLCTL_M2BUS_MASK		(0x7 << MIPSPLLCTL_M2BUS_SHIFT)
+
+/* ADSL PHY PLL Control register */
+#define PERF_ADSLPLLCTL_REG		0x38
+#define ADSLPLLCTL_N1_SHIFT		20
+#define ADSLPLLCTL_N1_MASK		(0x7 << ADSLPLLCTL_N1_SHIFT)
+#define ADSLPLLCTL_N2_SHIFT		15
+#define ADSLPLLCTL_N2_MASK		(0x1f << ADSLPLLCTL_N2_SHIFT)
+#define ADSLPLLCTL_M1REF_SHIFT		12
+#define ADSLPLLCTL_M1REF_MASK		(0x7 << ADSLPLLCTL_M1REF_SHIFT)
+#define ADSLPLLCTL_M2REF_SHIFT		9
+#define ADSLPLLCTL_M2REF_MASK		(0x7 << ADSLPLLCTL_M2REF_SHIFT)
+#define ADSLPLLCTL_M1CPU_SHIFT		6
+#define ADSLPLLCTL_M1CPU_MASK		(0x7 << ADSLPLLCTL_M1CPU_SHIFT)
+#define ADSLPLLCTL_M1BUS_SHIFT		3
+#define ADSLPLLCTL_M1BUS_MASK		(0x7 << ADSLPLLCTL_M1BUS_SHIFT)
+#define ADSLPLLCTL_M2BUS_SHIFT		0
+#define ADSLPLLCTL_M2BUS_MASK		(0x7 << ADSLPLLCTL_M2BUS_SHIFT)
+
+#define ADSLPLLCTL_VAL(n1, n2, m1ref, m2ref, m1cpu, m1bus, m2bus)	\
+				(((n1) << ADSLPLLCTL_N1_SHIFT) |	\
+				((n2) << ADSLPLLCTL_N2_SHIFT) |		\
+				((m1ref) << ADSLPLLCTL_M1REF_SHIFT) |	\
+				((m2ref) << ADSLPLLCTL_M2REF_SHIFT) |	\
+				((m1cpu) << ADSLPLLCTL_M1CPU_SHIFT) |	\
+				((m1bus) << ADSLPLLCTL_M1BUS_SHIFT) |	\
+				((m2bus) << ADSLPLLCTL_M2BUS_SHIFT))
+
+
+/*************************************************************************
+ * _REG relative to RSET_TIMER
+ *************************************************************************/
+
+#define BCM63XX_TIMER_COUNT		4
+#define TIMER_T0_ID			0
+#define TIMER_T1_ID			1
+#define TIMER_T2_ID			2
+#define TIMER_WDT_ID			3
+
+/* Timer irqstat register */
+#define TIMER_IRQSTAT_REG		0
+#define TIMER_IRQSTAT_TIMER_CAUSE(x)	(1 << (x))
+#define TIMER_IRQSTAT_TIMER0_CAUSE	(1 << 0)
+#define TIMER_IRQSTAT_TIMER1_CAUSE	(1 << 1)
+#define TIMER_IRQSTAT_TIMER2_CAUSE	(1 << 2)
+#define TIMER_IRQSTAT_WDT_CAUSE		(1 << 3)
+#define TIMER_IRQSTAT_TIMER_IR_EN(x)	(1 << ((x) + 8))
+#define TIMER_IRQSTAT_TIMER0_IR_EN	(1 << 8)
+#define TIMER_IRQSTAT_TIMER1_IR_EN	(1 << 9)
+#define TIMER_IRQSTAT_TIMER2_IR_EN	(1 << 10)
+
+/* Timer control register */
+#define TIMER_CTLx_REG(x)		(0x4 + (x * 4))
+#define TIMER_CTL0_REG			0x4
+#define TIMER_CTL1_REG			0x8
+#define TIMER_CTL2_REG			0xC
+#define TIMER_CTL_COUNTDOWN_MASK	(0x3fffffff)
+#define TIMER_CTL_MONOTONIC_MASK	(1 << 30)
+#define TIMER_CTL_ENABLE_MASK		(1 << 31)
+
+
+/*************************************************************************
+ * _REG relative to RSET_WDT
+ *************************************************************************/
+
+/* Watchdog default count register */
+#define WDT_DEFVAL_REG			0x0
+
+/* Watchdog control register */
+#define WDT_CTL_REG			0x4
+
+/* Watchdog control register constants */
+#define WDT_START_1			(0xff00)
+#define WDT_START_2			(0x00ff)
+#define WDT_STOP_1			(0xee00)
+#define WDT_STOP_2			(0x00ee)
+
+/* Watchdog reset length register */
+#define WDT_RSTLEN_REG			0x8
+
+
+/*************************************************************************
+ * _REG relative to RSET_UARTx
+ *************************************************************************/
+
+/* UART Control Register */
+#define UART_CTL_REG			0x0
+#define UART_CTL_RXTMOUTCNT_SHIFT	0
+#define UART_CTL_RXTMOUTCNT_MASK	(0x1f << UART_CTL_RXTMOUTCNT_SHIFT)
+#define UART_CTL_RSTTXDN_SHIFT		5
+#define UART_CTL_RSTTXDN_MASK		(1 << UART_CTL_RSTTXDN_SHIFT)
+#define UART_CTL_RSTRXFIFO_SHIFT		6
+#define UART_CTL_RSTRXFIFO_MASK		(1 << UART_CTL_RSTRXFIFO_SHIFT)
+#define UART_CTL_RSTTXFIFO_SHIFT		7
+#define UART_CTL_RSTTXFIFO_MASK		(1 << UART_CTL_RSTTXFIFO_SHIFT)
+#define UART_CTL_STOPBITS_SHIFT		8
+#define UART_CTL_STOPBITS_MASK		(0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_1		(0x7 << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_STOPBITS_2		(0xf << UART_CTL_STOPBITS_SHIFT)
+#define UART_CTL_BITSPERSYM_SHIFT	12
+#define UART_CTL_BITSPERSYM_MASK	(0x3 << UART_CTL_BITSPERSYM_SHIFT)
+#define UART_CTL_XMITBRK_SHIFT		14
+#define UART_CTL_XMITBRK_MASK		(1 << UART_CTL_XMITBRK_SHIFT)
+#define UART_CTL_RSVD_SHIFT		15
+#define UART_CTL_RSVD_MASK		(1 << UART_CTL_RSVD_SHIFT)
+#define UART_CTL_RXPAREVEN_SHIFT		16
+#define UART_CTL_RXPAREVEN_MASK		(1 << UART_CTL_RXPAREVEN_SHIFT)
+#define UART_CTL_RXPAREN_SHIFT		17
+#define UART_CTL_RXPAREN_MASK		(1 << UART_CTL_RXPAREN_SHIFT)
+#define UART_CTL_TXPAREVEN_SHIFT		18
+#define UART_CTL_TXPAREVEN_MASK		(1 << UART_CTL_TXPAREVEN_SHIFT)
+#define UART_CTL_TXPAREN_SHIFT		18
+#define UART_CTL_TXPAREN_MASK		(1 << UART_CTL_TXPAREN_SHIFT)
+#define UART_CTL_LOOPBACK_SHIFT		20
+#define UART_CTL_LOOPBACK_MASK		(1 << UART_CTL_LOOPBACK_SHIFT)
+#define UART_CTL_RXEN_SHIFT		21
+#define UART_CTL_RXEN_MASK		(1 << UART_CTL_RXEN_SHIFT)
+#define UART_CTL_TXEN_SHIFT		22
+#define UART_CTL_TXEN_MASK		(1 << UART_CTL_TXEN_SHIFT)
+#define UART_CTL_BRGEN_SHIFT		23
+#define UART_CTL_BRGEN_MASK		(1 << UART_CTL_BRGEN_SHIFT)
+
+/* UART Baudword register */
+#define UART_BAUD_REG			0x4
+
+/* UART Misc Control register */
+#define UART_MCTL_REG			0x8
+#define UART_MCTL_DTR_SHIFT		0
+#define UART_MCTL_DTR_MASK		(1 << UART_MCTL_DTR_SHIFT)
+#define UART_MCTL_RTS_SHIFT		1
+#define UART_MCTL_RTS_MASK		(1 << UART_MCTL_RTS_SHIFT)
+#define UART_MCTL_RXFIFOTHRESH_SHIFT	8
+#define UART_MCTL_RXFIFOTHRESH_MASK	(0xf << UART_MCTL_RXFIFOTHRESH_SHIFT)
+#define UART_MCTL_TXFIFOTHRESH_SHIFT	12
+#define UART_MCTL_TXFIFOTHRESH_MASK	(0xf << UART_MCTL_TXFIFOTHRESH_SHIFT)
+#define UART_MCTL_RXFIFOFILL_SHIFT	16
+#define UART_MCTL_RXFIFOFILL_MASK	(0x1f << UART_MCTL_RXFIFOFILL_SHIFT)
+#define UART_MCTL_TXFIFOFILL_SHIFT	24
+#define UART_MCTL_TXFIFOFILL_MASK	(0x1f << UART_MCTL_TXFIFOFILL_SHIFT)
+
+/* UART External Input Configuration register */
+#define UART_EXTINP_REG			0xc
+#define UART_EXTINP_RI_SHIFT		0
+#define UART_EXTINP_RI_MASK		(1 << UART_EXTINP_RI_SHIFT)
+#define UART_EXTINP_CTS_SHIFT		1
+#define UART_EXTINP_CTS_MASK		(1 << UART_EXTINP_CTS_SHIFT)
+#define UART_EXTINP_DCD_SHIFT		2
+#define UART_EXTINP_DCD_MASK		(1 << UART_EXTINP_DCD_SHIFT)
+#define UART_EXTINP_DSR_SHIFT		3
+#define UART_EXTINP_DSR_MASK		(1 << UART_EXTINP_DSR_SHIFT)
+#define UART_EXTINP_IRSTAT(x)		(1 << (x + 4))
+#define UART_EXTINP_IRMASK(x)		(1 << (x + 8))
+#define UART_EXTINP_IR_RI		0
+#define UART_EXTINP_IR_CTS		1
+#define UART_EXTINP_IR_DCD		2
+#define UART_EXTINP_IR_DSR		3
+#define UART_EXTINP_RI_NOSENSE_SHIFT	16
+#define UART_EXTINP_RI_NOSENSE_MASK	(1 << UART_EXTINP_RI_NOSENSE_SHIFT)
+#define UART_EXTINP_CTS_NOSENSE_SHIFT	17
+#define UART_EXTINP_CTS_NOSENSE_MASK	(1 << UART_EXTINP_CTS_NOSENSE_SHIFT)
+#define UART_EXTINP_DCD_NOSENSE_SHIFT	18
+#define UART_EXTINP_DCD_NOSENSE_MASK	(1 << UART_EXTINP_DCD_NOSENSE_SHIFT)
+#define UART_EXTINP_DSR_NOSENSE_SHIFT	19
+#define UART_EXTINP_DSR_NOSENSE_MASK	(1 << UART_EXTINP_DSR_NOSENSE_SHIFT)
+
+/* UART Interrupt register */
+#define UART_IR_REG			0x10
+#define UART_IR_MASK(x)			(1 << (x + 16))
+#define UART_IR_STAT(x)			(1 << (x))
+#define UART_IR_EXTIP			0
+#define UART_IR_TXUNDER			1
+#define UART_IR_TXOVER			2
+#define UART_IR_TXTRESH			3
+#define UART_IR_TXRDLATCH		4
+#define UART_IR_TXEMPTY			5
+#define UART_IR_RXUNDER			6
+#define UART_IR_RXOVER			7
+#define UART_IR_RXTIMEOUT		8
+#define UART_IR_RXFULL			9
+#define UART_IR_RXTHRESH		10
+#define UART_IR_RXNOTEMPTY		11
+#define UART_IR_RXFRAMEERR		12
+#define UART_IR_RXPARERR		13
+#define UART_IR_RXBRK			14
+#define UART_IR_TXDONE			15
+
+/* UART Fifo register */
+#define UART_FIFO_REG			0x14
+#define UART_FIFO_VALID_SHIFT		0
+#define UART_FIFO_VALID_MASK		0xff
+#define UART_FIFO_FRAMEERR_SHIFT	8
+#define UART_FIFO_FRAMEERR_MASK		(1 << UART_FIFO_FRAMEERR_SHIFT)
+#define UART_FIFO_PARERR_SHIFT		9
+#define UART_FIFO_PARERR_MASK		(1 << UART_FIFO_PARERR_SHIFT)
+#define UART_FIFO_BRKDET_SHIFT		10
+#define UART_FIFO_BRKDET_MASK		(1 << UART_FIFO_BRKDET_SHIFT)
+#define UART_FIFO_ANYERR_MASK		(UART_FIFO_FRAMEERR_MASK |	\
+					UART_FIFO_PARERR_MASK |		\
+					UART_FIFO_BRKDET_MASK)
+
+
+/*************************************************************************
+ * _REG relative to RSET_GPIO
+ *************************************************************************/
+
+/* GPIO registers */
+#define GPIO_CTL_HI_REG			0x0
+#define GPIO_CTL_LO_REG			0x4
+#define GPIO_DATA_HI_REG		0x8
+#define GPIO_DATA_LO_REG		0xC
+
+/* GPIO mux registers and constants */
+#define GPIO_MODE_REG			0x18
+
+#define GPIO_MODE_6348_G4_DIAG		0x00090000
+#define GPIO_MODE_6348_G4_UTOPIA	0x00080000
+#define GPIO_MODE_6348_G4_LEGACY_LED	0x00030000
+#define GPIO_MODE_6348_G4_MII_SNOOP	0x00020000
+#define GPIO_MODE_6348_G4_EXT_EPHY	0x00010000
+#define GPIO_MODE_6348_G3_DIAG		0x00009000
+#define GPIO_MODE_6348_G3_UTOPIA	0x00008000
+#define GPIO_MODE_6348_G3_EXT_MII	0x00007000
+#define GPIO_MODE_6348_G2_DIAG		0x00000900
+#define GPIO_MODE_6348_G2_PCI		0x00000500
+#define GPIO_MODE_6348_G1_DIAG		0x00000090
+#define GPIO_MODE_6348_G1_UTOPIA	0x00000080
+#define GPIO_MODE_6348_G1_SPI_UART	0x00000060
+#define GPIO_MODE_6348_G1_SPI_MASTER	0x00000060
+#define GPIO_MODE_6348_G1_MII_PCCARD	0x00000040
+#define GPIO_MODE_6348_G1_MII_SNOOP	0x00000020
+#define GPIO_MODE_6348_G1_EXT_EPHY	0x00000010
+#define GPIO_MODE_6348_G0_DIAG		0x00000009
+#define GPIO_MODE_6348_G0_EXT_MII	0x00000007
+
+#define GPIO_MODE_6358_EXTRACS		(1 << 5)
+#define GPIO_MODE_6358_UART1		(1 << 6)
+#define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
+#define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
+#define GPIO_MODE_6358_UTOPIA		(1 << 12)
+
+
+/*************************************************************************
+ * _REG relative to RSET_ENET
+ *************************************************************************/
+
+/* Receiver Configuration register */
+#define ENET_RXCFG_REG			0x0
+#define ENET_RXCFG_ALLMCAST_SHIFT	1
+#define ENET_RXCFG_ALLMCAST_MASK	(1 << ENET_RXCFG_ALLMCAST_SHIFT)
+#define ENET_RXCFG_PROMISC_SHIFT	3
+#define ENET_RXCFG_PROMISC_MASK		(1 << ENET_RXCFG_PROMISC_SHIFT)
+#define ENET_RXCFG_LOOPBACK_SHIFT	4
+#define ENET_RXCFG_LOOPBACK_MASK	(1 << ENET_RXCFG_LOOPBACK_SHIFT)
+#define ENET_RXCFG_ENFLOW_SHIFT		5
+#define ENET_RXCFG_ENFLOW_MASK		(1 << ENET_RXCFG_ENFLOW_SHIFT)
+
+/* Receive Maximum Length register */
+#define ENET_RXMAXLEN_REG		0x4
+#define ENET_RXMAXLEN_SHIFT		0
+#define ENET_RXMAXLEN_MASK		(0x7ff << ENET_RXMAXLEN_SHIFT)
+
+/* Transmit Maximum Length register */
+#define ENET_TXMAXLEN_REG		0x8
+#define ENET_TXMAXLEN_SHIFT		0
+#define ENET_TXMAXLEN_MASK		(0x7ff << ENET_TXMAXLEN_SHIFT)
+
+/* MII Status/Control register */
+#define ENET_MIISC_REG			0x10
+#define ENET_MIISC_MDCFREQDIV_SHIFT	0
+#define ENET_MIISC_MDCFREQDIV_MASK	(0x7f << ENET_MIISC_MDCFREQDIV_SHIFT)
+#define ENET_MIISC_PREAMBLEEN_SHIFT	7
+#define ENET_MIISC_PREAMBLEEN_MASK	(1 << ENET_MIISC_PREAMBLEEN_SHIFT)
+
+/* MII Data register */
+#define ENET_MIIDATA_REG		0x14
+#define ENET_MIIDATA_DATA_SHIFT		0
+#define ENET_MIIDATA_DATA_MASK		(0xffff << ENET_MIIDATA_DATA_SHIFT)
+#define ENET_MIIDATA_TA_SHIFT		16
+#define ENET_MIIDATA_TA_MASK		(0x3 << ENET_MIIDATA_TA_SHIFT)
+#define ENET_MIIDATA_REG_SHIFT		18
+#define ENET_MIIDATA_REG_MASK		(0x1f << ENET_MIIDATA_REG_SHIFT)
+#define ENET_MIIDATA_PHYID_SHIFT	23
+#define ENET_MIIDATA_PHYID_MASK		(0x1f << ENET_MIIDATA_PHYID_SHIFT)
+#define ENET_MIIDATA_OP_READ_MASK	(0x6 << 28)
+#define ENET_MIIDATA_OP_WRITE_MASK	(0x5 << 28)
+
+/* Ethernet Interrupt Mask register */
+#define ENET_IRMASK_REG			0x18
+
+/* Ethernet Interrupt register */
+#define ENET_IR_REG			0x1c
+#define ENET_IR_MII			(1 << 0)
+#define ENET_IR_MIB			(1 << 1)
+#define ENET_IR_FLOWC			(1 << 2)
+
+/* Ethernet Control register */
+#define ENET_CTL_REG			0x2c
+#define ENET_CTL_ENABLE_SHIFT		0
+#define ENET_CTL_ENABLE_MASK		(1 << ENET_CTL_ENABLE_SHIFT)
+#define ENET_CTL_DISABLE_SHIFT		1
+#define ENET_CTL_DISABLE_MASK		(1 << ENET_CTL_DISABLE_SHIFT)
+#define ENET_CTL_SRESET_SHIFT		2
+#define ENET_CTL_SRESET_MASK		(1 << ENET_CTL_SRESET_SHIFT)
+#define ENET_CTL_EPHYSEL_SHIFT		3
+#define ENET_CTL_EPHYSEL_MASK		(1 << ENET_CTL_EPHYSEL_SHIFT)
+
+/* Transmit Control register */
+#define ENET_TXCTL_REG			0x30
+#define ENET_TXCTL_FD_SHIFT		0
+#define ENET_TXCTL_FD_MASK		(1 << ENET_TXCTL_FD_SHIFT)
+
+/* Transmit Watermask register */
+#define ENET_TXWMARK_REG		0x34
+#define ENET_TXWMARK_WM_SHIFT		0
+#define ENET_TXWMARK_WM_MASK		(0x3f << ENET_TXWMARK_WM_SHIFT)
+
+/* MIB Control register */
+#define ENET_MIBCTL_REG			0x38
+#define ENET_MIBCTL_RDCLEAR_SHIFT	0
+#define ENET_MIBCTL_RDCLEAR_MASK	(1 << ENET_MIBCTL_RDCLEAR_SHIFT)
+
+/* Perfect Match Data Low register */
+#define ENET_PML_REG(x)			(0x58 + (x) * 8)
+#define ENET_PMH_REG(x)			(0x5c + (x) * 8)
+#define ENET_PMH_DATAVALID_SHIFT	16
+#define ENET_PMH_DATAVALID_MASK		(1 << ENET_PMH_DATAVALID_SHIFT)
+
+/* MIB register */
+#define ENET_MIB_REG(x)			(0x200 + (x) * 4)
+#define ENET_MIB_REG_COUNT		55
+
+
+/*************************************************************************
+ * _REG relative to RSET_ENETDMA
+ *************************************************************************/
+
+/* Controller Configuration Register */
+#define ENETDMA_CFG_REG			(0x0)
+#define ENETDMA_CFG_EN_SHIFT		0
+#define ENETDMA_CFG_EN_MASK		(1 << ENETDMA_CFG_EN_SHIFT)
+#define ENETDMA_CFG_FLOWCH_MASK(x)	(1 << ((x >> 1) + 1))
+
+/* Flow Control Descriptor Low Threshold register */
+#define ENETDMA_FLOWCL_REG(x)		(0x4 + (x) * 6)
+
+/* Flow Control Descriptor High Threshold register */
+#define ENETDMA_FLOWCH_REG(x)		(0x8 + (x) * 6)
+
+/* Flow Control Descriptor Buffer Alloca Threshold register */
+#define ENETDMA_BUFALLOC_REG(x)		(0xc + (x) * 6)
+#define ENETDMA_BUFALLOC_FORCE_SHIFT	31
+#define ENETDMA_BUFALLOC_FORCE_MASK	(1 << ENETDMA_BUFALLOC_FORCE_SHIFT)
+
+/* Channel Configuration register */
+#define ENETDMA_CHANCFG_REG(x)		(0x100 + (x) * 0x10)
+#define ENETDMA_CHANCFG_EN_SHIFT	0
+#define ENETDMA_CHANCFG_EN_MASK		(1 << ENETDMA_CHANCFG_EN_SHIFT)
+#define ENETDMA_CHANCFG_PKTHALT_SHIFT	1
+#define ENETDMA_CHANCFG_PKTHALT_MASK	(1 << ENETDMA_CHANCFG_PKTHALT_SHIFT)
+
+/* Interrupt Control/Status register */
+#define ENETDMA_IR_REG(x)		(0x104 + (x) * 0x10)
+#define ENETDMA_IR_BUFDONE_MASK		(1 << 0)
+#define ENETDMA_IR_PKTDONE_MASK		(1 << 1)
+#define ENETDMA_IR_NOTOWNER_MASK	(1 << 2)
+
+/* Interrupt Mask register */
+#define ENETDMA_IRMASK_REG(x)		(0x108 + (x) * 0x10)
+
+/* Maximum Burst Length */
+#define ENETDMA_MAXBURST_REG(x)		(0x10C + (x) * 0x10)
+
+/* Ring Start Address register */
+#define ENETDMA_RSTART_REG(x)		(0x200 + (x) * 0x10)
+
+/* State Ram Word 2 */
+#define ENETDMA_SRAM2_REG(x)		(0x204 + (x) * 0x10)
+
+/* State Ram Word 3 */
+#define ENETDMA_SRAM3_REG(x)		(0x208 + (x) * 0x10)
+
+/* State Ram Word 4 */
+#define ENETDMA_SRAM4_REG(x)		(0x20c + (x) * 0x10)
+
+
+/*************************************************************************
+ * _REG relative to RSET_OHCI_PRIV
+ *************************************************************************/
+
+#define OHCI_PRIV_REG			0x0
+#define OHCI_PRIV_PORT1_HOST_SHIFT	0
+#define OHCI_PRIV_PORT1_HOST_MASK	(1 << OHCI_PRIV_PORT1_HOST_SHIFT)
+#define OHCI_PRIV_REG_SWAP_SHIFT	3
+#define OHCI_PRIV_REG_SWAP_MASK		(1 << OHCI_PRIV_REG_SWAP_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_USBH_PRIV
+ *************************************************************************/
+
+#define USBH_PRIV_SWAP_REG		0x0
+#define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT	4
+#define USBH_PRIV_SWAP_EHCI_ENDN_MASK	(1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT)
+#define USBH_PRIV_SWAP_EHCI_DATA_SHIFT	3
+#define USBH_PRIV_SWAP_EHCI_DATA_MASK	(1 << USBH_PRIV_SWAP_EHCI_DATA_SHIFT)
+#define USBH_PRIV_SWAP_OHCI_ENDN_SHIFT	1
+#define USBH_PRIV_SWAP_OHCI_ENDN_MASK	(1 << USBH_PRIV_SWAP_OHCI_ENDN_SHIFT)
+#define USBH_PRIV_SWAP_OHCI_DATA_SHIFT	0
+#define USBH_PRIV_SWAP_OHCI_DATA_MASK	(1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT)
+
+#define USBH_PRIV_TEST_REG		0x24
+
+
+/*************************************************************************
+ * _REG relative to RSET_MPI
+ *************************************************************************/
+
+/* well known (hard wired) chip select */
+#define MPI_CS_PCMCIA_COMMON		4
+#define MPI_CS_PCMCIA_ATTR		5
+#define MPI_CS_PCMCIA_IO		6
+
+/* Chip select base register */
+#define MPI_CSBASE_REG(x)		(0x0 + (x) * 8)
+#define MPI_CSBASE_BASE_SHIFT		13
+#define MPI_CSBASE_BASE_MASK		(0x1ffff << MPI_CSBASE_BASE_SHIFT)
+#define MPI_CSBASE_SIZE_SHIFT		0
+#define MPI_CSBASE_SIZE_MASK		(0xf << MPI_CSBASE_SIZE_SHIFT)
+
+#define MPI_CSBASE_SIZE_8K		0
+#define MPI_CSBASE_SIZE_16K		1
+#define MPI_CSBASE_SIZE_32K		2
+#define MPI_CSBASE_SIZE_64K		3
+#define MPI_CSBASE_SIZE_128K		4
+#define MPI_CSBASE_SIZE_256K		5
+#define MPI_CSBASE_SIZE_512K		6
+#define MPI_CSBASE_SIZE_1M		7
+#define MPI_CSBASE_SIZE_2M		8
+#define MPI_CSBASE_SIZE_4M		9
+#define MPI_CSBASE_SIZE_8M		10
+#define MPI_CSBASE_SIZE_16M		11
+#define MPI_CSBASE_SIZE_32M		12
+#define MPI_CSBASE_SIZE_64M		13
+#define MPI_CSBASE_SIZE_128M		14
+#define MPI_CSBASE_SIZE_256M		15
+
+/* Chip select control register */
+#define MPI_CSCTL_REG(x)		(0x4 + (x) * 8)
+#define MPI_CSCTL_ENABLE_MASK		(1 << 0)
+#define MPI_CSCTL_WAIT_SHIFT		1
+#define MPI_CSCTL_WAIT_MASK		(0x7 << MPI_CSCTL_WAIT_SHIFT)
+#define MPI_CSCTL_DATA16_MASK		(1 << 4)
+#define MPI_CSCTL_SYNCMODE_MASK		(1 << 7)
+#define MPI_CSCTL_TSIZE_MASK		(1 << 8)
+#define MPI_CSCTL_ENDIANSWAP_MASK	(1 << 10)
+#define MPI_CSCTL_SETUP_SHIFT		16
+#define MPI_CSCTL_SETUP_MASK		(0xf << MPI_CSCTL_SETUP_SHIFT)
+#define MPI_CSCTL_HOLD_SHIFT		20
+#define MPI_CSCTL_HOLD_MASK		(0xf << MPI_CSCTL_HOLD_SHIFT)
+
+/* PCI registers */
+#define MPI_SP0_RANGE_REG		0x100
+#define MPI_SP0_REMAP_REG		0x104
+#define MPI_SP0_REMAP_ENABLE_MASK	(1 << 0)
+#define MPI_SP1_RANGE_REG		0x10C
+#define MPI_SP1_REMAP_REG		0x110
+#define MPI_SP1_REMAP_ENABLE_MASK	(1 << 0)
+
+#define MPI_L2PCFG_REG			0x11C
+#define MPI_L2PCFG_CFG_TYPE_SHIFT	0
+#define MPI_L2PCFG_CFG_TYPE_MASK	(0x3 << MPI_L2PCFG_CFG_TYPE_SHIFT)
+#define MPI_L2PCFG_REG_SHIFT		2
+#define MPI_L2PCFG_REG_MASK		(0x3f << MPI_L2PCFG_REG_SHIFT)
+#define MPI_L2PCFG_FUNC_SHIFT		8
+#define MPI_L2PCFG_FUNC_MASK		(0x7 << MPI_L2PCFG_FUNC_SHIFT)
+#define MPI_L2PCFG_DEVNUM_SHIFT		11
+#define MPI_L2PCFG_DEVNUM_MASK		(0x1f << MPI_L2PCFG_DEVNUM_SHIFT)
+#define MPI_L2PCFG_CFG_USEREG_MASK	(1 << 30)
+#define MPI_L2PCFG_CFG_SEL_MASK		(1 << 31)
+
+#define MPI_L2PMEMRANGE1_REG		0x120
+#define MPI_L2PMEMBASE1_REG		0x124
+#define MPI_L2PMEMREMAP1_REG		0x128
+#define MPI_L2PMEMRANGE2_REG		0x12C
+#define MPI_L2PMEMBASE2_REG		0x130
+#define MPI_L2PMEMREMAP2_REG		0x134
+#define MPI_L2PIORANGE_REG		0x138
+#define MPI_L2PIOBASE_REG		0x13C
+#define MPI_L2PIOREMAP_REG		0x140
+#define MPI_L2P_BASE_MASK		(0xffff8000)
+#define MPI_L2PREMAP_ENABLED_MASK	(1 << 0)
+#define MPI_L2PREMAP_IS_CARDBUS_MASK	(1 << 2)
+
+#define MPI_PCIMODESEL_REG		0x144
+#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK	(1 << 0)
+#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK	(1 << 1)
+#define MPI_PCIMODESEL_EXT_ARB_MASK	(1 << 2)
+#define MPI_PCIMODESEL_PREFETCH_SHIFT	4
+#define MPI_PCIMODESEL_PREFETCH_MASK	(0xf << MPI_PCIMODESEL_PREFETCH_SHIFT)
+
+#define MPI_LOCBUSCTL_REG		0x14C
+#define MPI_LOCBUSCTL_EN_PCI_GPIO_MASK	(1 << 0)
+#define MPI_LOCBUSCTL_U2P_NOSWAP_MASK	(1 << 1)
+
+#define MPI_LOCINT_REG			0x150
+#define MPI_LOCINT_MASK(x)		(1 << (x + 16))
+#define MPI_LOCINT_STAT(x)		(1 << (x))
+#define MPI_LOCINT_DIR_FAILED		6
+#define MPI_LOCINT_EXT_PCI_INT		7
+#define MPI_LOCINT_SERR			8
+#define MPI_LOCINT_CSERR		9
+
+#define MPI_PCICFGCTL_REG		0x178
+#define MPI_PCICFGCTL_CFGADDR_SHIFT	2
+#define MPI_PCICFGCTL_CFGADDR_MASK	(0x1f << MPI_PCICFGCTL_CFGADDR_SHIFT)
+#define MPI_PCICFGCTL_WRITEEN_MASK	(1 << 7)
+
+#define MPI_PCICFGDATA_REG		0x17C
+
+/* PCI host bridge custom register */
+#define BCMPCI_REG_TIMERS		0x40
+#define REG_TIMER_TRDY_SHIFT		0
+#define REG_TIMER_TRDY_MASK		(0xff << REG_TIMER_TRDY_SHIFT)
+#define REG_TIMER_RETRY_SHIFT		8
+#define REG_TIMER_RETRY_MASK		(0xff << REG_TIMER_RETRY_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_PCMCIA
+ *************************************************************************/
+
+#define PCMCIA_C1_REG			0x0
+#define PCMCIA_C1_CD1_MASK		(1 << 0)
+#define PCMCIA_C1_CD2_MASK		(1 << 1)
+#define PCMCIA_C1_VS1_MASK		(1 << 2)
+#define PCMCIA_C1_VS2_MASK		(1 << 3)
+#define PCMCIA_C1_VS1OE_MASK		(1 << 6)
+#define PCMCIA_C1_VS2OE_MASK		(1 << 7)
+#define PCMCIA_C1_CBIDSEL_SHIFT		(8)
+#define PCMCIA_C1_CBIDSEL_MASK		(0x1f << PCMCIA_C1_CBIDSEL_SHIFT)
+#define PCMCIA_C1_EN_PCMCIA_GPIO_MASK	(1 << 13)
+#define PCMCIA_C1_EN_PCMCIA_MASK	(1 << 14)
+#define PCMCIA_C1_EN_CARDBUS_MASK	(1 << 15)
+#define PCMCIA_C1_RESET_MASK		(1 << 18)
+
+#define PCMCIA_C2_REG			0x8
+#define PCMCIA_C2_DATA16_MASK		(1 << 0)
+#define PCMCIA_C2_BYTESWAP_MASK		(1 << 1)
+#define PCMCIA_C2_RWCOUNT_SHIFT		2
+#define PCMCIA_C2_RWCOUNT_MASK		(0x3f << PCMCIA_C2_RWCOUNT_SHIFT)
+#define PCMCIA_C2_INACTIVE_SHIFT	8
+#define PCMCIA_C2_INACTIVE_MASK		(0x3f << PCMCIA_C2_INACTIVE_SHIFT)
+#define PCMCIA_C2_SETUP_SHIFT		16
+#define PCMCIA_C2_SETUP_MASK		(0x3f << PCMCIA_C2_SETUP_SHIFT)
+#define PCMCIA_C2_HOLD_SHIFT		24
+#define PCMCIA_C2_HOLD_MASK		(0x3f << PCMCIA_C2_HOLD_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_SDRAM
+ *************************************************************************/
+
+#define SDRAM_CFG_REG			0x0
+#define SDRAM_CFG_ROW_SHIFT		4
+#define SDRAM_CFG_ROW_MASK		(0x3 << SDRAM_CFG_ROW_SHIFT)
+#define SDRAM_CFG_COL_SHIFT		6
+#define SDRAM_CFG_COL_MASK		(0x3 << SDRAM_CFG_COL_SHIFT)
+#define SDRAM_CFG_32B_SHIFT		10
+#define SDRAM_CFG_32B_MASK		(1 << SDRAM_CFG_32B_SHIFT)
+#define SDRAM_CFG_BANK_SHIFT		13
+#define SDRAM_CFG_BANK_MASK		(1 << SDRAM_CFG_BANK_SHIFT)
+
+#define SDRAM_PRIO_REG			0x2C
+#define SDRAM_PRIO_MIPS_SHIFT		29
+#define SDRAM_PRIO_MIPS_MASK		(1 << SDRAM_PRIO_MIPS_SHIFT)
+#define SDRAM_PRIO_ADSL_SHIFT		30
+#define SDRAM_PRIO_ADSL_MASK		(1 << SDRAM_PRIO_ADSL_SHIFT)
+#define SDRAM_PRIO_EN_SHIFT		31
+#define SDRAM_PRIO_EN_MASK		(1 << SDRAM_PRIO_EN_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_MEMC
+ *************************************************************************/
+
+#define MEMC_CFG_REG			0x4
+#define MEMC_CFG_32B_SHIFT		1
+#define MEMC_CFG_32B_MASK		(1 << MEMC_CFG_32B_SHIFT)
+#define MEMC_CFG_COL_SHIFT		3
+#define MEMC_CFG_COL_MASK		(0x3 << MEMC_CFG_COL_SHIFT)
+#define MEMC_CFG_ROW_SHIFT		6
+#define MEMC_CFG_ROW_MASK		(0x3 << MEMC_CFG_ROW_SHIFT)
+
+
+/*************************************************************************
+ * _REG relative to RSET_DDR
+ *************************************************************************/
+
+#define DDR_DMIPSPLLCFG_REG		0x18
+#define DMIPSPLLCFG_M1_SHIFT		0
+#define DMIPSPLLCFG_M1_MASK		(0xff << DMIPSPLLCFG_M1_SHIFT)
+#define DMIPSPLLCFG_N1_SHIFT		23
+#define DMIPSPLLCFG_N1_MASK		(0x3f << DMIPSPLLCFG_N1_SHIFT)
+#define DMIPSPLLCFG_N2_SHIFT		29
+#define DMIPSPLLCFG_N2_MASK		(0x7 << DMIPSPLLCFG_N2_SHIFT)
+
+#endif /* BCM63XX_REGS_H_ */
+
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
new file mode 100644
index 00000000000..c0fce833c9e
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
@@ -0,0 +1,11 @@
+#ifndef BCM63XX_TIMER_H_
+#define BCM63XX_TIMER_H_
+
+int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data);
+void bcm63xx_timer_unregister(int id);
+int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us);
+int bcm63xx_timer_enable(int id);
+int bcm63xx_timer_disable(int id);
+unsigned int bcm63xx_timer_countdown(unsigned int countdown_us);
+
+#endif /* !BCM63XX_TIMER_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
new file mode 100644
index 00000000000..6479090a410
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -0,0 +1,60 @@
+#ifndef BOARD_BCM963XX_H_
+#define BOARD_BCM963XX_H_
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_dev_dsp.h>
+
+/*
+ * flash mapping
+ */
+#define BCM963XX_CFE_VERSION_OFFSET	0x570
+#define BCM963XX_NVRAM_OFFSET		0x580
+
+/*
+ * nvram structure
+ */
+struct bcm963xx_nvram {
+	u32	version;
+	u8	reserved1[256];
+	u8	name[16];
+	u32	main_tp_number;
+	u32	psi_size;
+	u32	mac_addr_count;
+	u8	mac_addr_base[6];
+	u8	reserved2[2];
+	u32	checksum_old;
+	u8	reserved3[720];
+	u32	checksum_high;
+};
+
+/*
+ * board definition
+ */
+struct board_info {
+	u8		name[16];
+	unsigned int	expected_cpu_id;
+
+	/* enabled feature/device */
+	unsigned int	has_enet0:1;
+	unsigned int	has_enet1:1;
+	unsigned int	has_pci:1;
+	unsigned int	has_pccard:1;
+	unsigned int	has_ohci0:1;
+	unsigned int	has_ehci0:1;
+	unsigned int	has_dsp:1;
+
+	/* ethernet config */
+	struct bcm63xx_enet_platform_data enet0;
+	struct bcm63xx_enet_platform_data enet1;
+
+	/* DSP config */
+	struct bcm63xx_dsp_platform_data dsp;
+
+	/* GPIO LEDs */
+	struct gpio_led leds[5];
+};
+
+#endif /* ! BOARD_BCM963XX_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
new file mode 100644
index 00000000000..71742bac940
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H
+
+#include <bcm63xx_cpu.h>
+
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_4k_cache		1
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#define cpu_has_watch			0
+#define cpu_has_divec			1
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			1
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+#define cpu_has_mips16			0
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_smartmips		0
+#define cpu_has_vtag_icache		0
+
+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345))
+#define cpu_has_dc_aliases		0
+#endif
+
+#define cpu_has_ic_fills_f_dc		0
+#define cpu_has_pindexed_dcache		0
+
+#define cpu_has_mips32r1		1
+#define cpu_has_mips32r2		0
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#define cpu_has_dsp			0
+#define cpu_has_mipsmt			0
+#define cpu_has_userlocal		0
+
+#define cpu_has_nofpuex			0
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+#define cpu_scache_line_size()		0
+
+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h
new file mode 100644
index 00000000000..7cda8c0a397
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H
+#define __ASM_MIPS_MACH_BCM63XX_GPIO_H
+
+#include <bcm63xx_gpio.h>
+
+#define gpio_to_irq(gpio)	NULL
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+
+#define gpio_cansleep __gpio_cansleep
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/war.h b/arch/mips/include/asm/mach-bcm63xx/war.h
new file mode 100644
index 00000000000..8e3f3fdf320
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H
+#define __ASM_MIPS_MACH_BCM63XX_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 0d4d5ea6fac..91bfe73a7f6 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_NEC_MARKEINS)	+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
+obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
+					ops-bcm63xx.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c
new file mode 100644
index 00000000000..340863009da
--- /dev/null
+++ b/arch/mips/pci/fixup-bcm63xx.c
@@ -0,0 +1,21 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <bcm63xx_cpu.h>
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return bcm63xx_get_irq_number(IRQ_PCI);
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
new file mode 100644
index 00000000000..822ae179bc5
--- /dev/null
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -0,0 +1,467 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * swizzle 32bits data to return only the needed part
+ */
+static int postprocess_read(u32 data, int where, unsigned int size)
+{
+	u32 ret;
+
+	ret = 0;
+	switch (size) {
+	case 1:
+		ret = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		ret = (data >> ((where & 3) << 3)) & 0xffff;
+		break;
+	case 4:
+		ret = data;
+		break;
+	}
+	return ret;
+}
+
+static int preprocess_write(u32 orig_data, u32 val, int where,
+			    unsigned int size)
+{
+	u32 ret;
+
+	ret = 0;
+	switch (size) {
+	case 1:
+		ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 2:
+		ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 4:
+		ret = val;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * setup hardware for a configuration cycle with given parameters
+ */
+static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
+				    unsigned int devfn, int where)
+{
+	unsigned int slot, func, reg;
+	u32 val;
+
+	slot = PCI_SLOT(devfn);
+	func = PCI_FUNC(devfn);
+	reg = where >> 2;
+
+	/* sanity check */
+	if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
+		return 1;
+
+	if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
+		return 1;
+
+	if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
+		return 1;
+
+	/* ok, setup config access */
+	val = (reg << MPI_L2PCFG_REG_SHIFT);
+	val |= (func << MPI_L2PCFG_FUNC_SHIFT);
+	val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
+	val |= MPI_L2PCFG_CFG_USEREG_MASK;
+	val |= MPI_L2PCFG_CFG_SEL_MASK;
+	/* type 0 cycle for local bus, type 1 cycle for anything else */
+	if (type != 0) {
+		/* FIXME: how to specify bus ??? */
+		val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
+	}
+	bcm_mpi_writel(val, MPI_L2PCFG_REG);
+
+	return 0;
+}
+
+static int bcm63xx_do_cfg_read(int type, unsigned int busn,
+				unsigned int devfn, int where, int size,
+				u32 *val)
+{
+	u32 data;
+
+	/* two phase cycle, first we write address, then read data at
+	 * another location, caller already has a spinlock so no need
+	 * to add one here  */
+	if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	iob();
+	data = le32_to_cpu(__raw_readl(pci_iospace_start));
+	/* restore IO space normal behaviour */
+	bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+	*val = postprocess_read(data, where, size);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_do_cfg_write(int type, unsigned int busn,
+				 unsigned int devfn, int where, int size,
+				 u32 val)
+{
+	u32 data;
+
+	/* two phase cycle, first we write address, then write data to
+	 * another location, caller already has a spinlock so no need
+	 * to add one here  */
+	if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	iob();
+
+	data = le32_to_cpu(__raw_readl(pci_iospace_start));
+	data = preprocess_write(data, val, where, size);
+
+	__raw_writel(cpu_to_le32(data), pci_iospace_start);
+	wmb();
+	/* no way to know the access is done, we have to wait */
+	udelay(500);
+	/* restore IO space normal behaviour */
+	bcm_mpi_writel(0, MPI_L2PCFG_REG);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
+			     int where, int size, u32 *val)
+{
+	int type;
+
+	type = bus->parent ? 1 : 0;
+
+	if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return bcm63xx_do_cfg_read(type, bus->number, devfn,
+				    where, size, val);
+}
+
+static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 val)
+{
+	int type;
+
+	type = bus->parent ? 1 : 0;
+
+	if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return bcm63xx_do_cfg_write(type, bus->number, devfn,
+				     where, size, val);
+}
+
+struct pci_ops bcm63xx_pci_ops = {
+	.read   = bcm63xx_pci_read,
+	.write  = bcm63xx_pci_write
+};
+
+#ifdef CONFIG_CARDBUS
+/*
+ * emulate configuration read access on a cardbus bridge
+ */
+#define FAKE_CB_BRIDGE_SLOT	0x1e
+
+static int fake_cb_bridge_bus_number = -1;
+
+static struct {
+	u16 pci_command;
+	u8 cb_latency;
+	u8 subordinate_busn;
+	u8 cardbus_busn;
+	u8 pci_busn;
+	int bus_assigned;
+	u16 bridge_control;
+
+	u32 mem_base0;
+	u32 mem_limit0;
+	u32 mem_base1;
+	u32 mem_limit1;
+
+	u32 io_base0;
+	u32 io_limit0;
+	u32 io_base1;
+	u32 io_limit1;
+} fake_cb_bridge_regs;
+
+static int fake_cb_bridge_read(int where, int size, u32 *val)
+{
+	unsigned int reg;
+	u32 data;
+
+	data = 0;
+	reg = where >> 2;
+	switch (reg) {
+	case (PCI_VENDOR_ID >> 2):
+	case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
+		/* create dummy vendor/device id from our cpu id */
+		data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
+		break;
+
+	case (PCI_COMMAND >> 2):
+		data = (PCI_STATUS_DEVSEL_SLOW << 16);
+		data |= fake_cb_bridge_regs.pci_command;
+		break;
+
+	case (PCI_CLASS_REVISION >> 2):
+		data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
+		break;
+
+	case (PCI_CACHE_LINE_SIZE >> 2):
+		data = (PCI_HEADER_TYPE_CARDBUS << 16);
+		break;
+
+	case (PCI_INTERRUPT_LINE >> 2):
+		/* bridge control */
+		data = (fake_cb_bridge_regs.bridge_control << 16);
+		/* pin:intA line:0xff */
+		data |= (0x1 << 8) | 0xff;
+		break;
+
+	case (PCI_CB_PRIMARY_BUS >> 2):
+		data = (fake_cb_bridge_regs.cb_latency << 24);
+		data |= (fake_cb_bridge_regs.subordinate_busn << 16);
+		data |= (fake_cb_bridge_regs.cardbus_busn << 8);
+		data |= fake_cb_bridge_regs.pci_busn;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_0 >> 2):
+		data = fake_cb_bridge_regs.mem_base0;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_0 >> 2):
+		data = fake_cb_bridge_regs.mem_limit0;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_1 >> 2):
+		data = fake_cb_bridge_regs.mem_base1;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_1 >> 2):
+		data = fake_cb_bridge_regs.mem_limit1;
+		break;
+
+	case (PCI_CB_IO_BASE_0 >> 2):
+		/* | 1 for 32bits io support */
+		data = fake_cb_bridge_regs.io_base0 | 0x1;
+		break;
+
+	case (PCI_CB_IO_LIMIT_0 >> 2):
+		data = fake_cb_bridge_regs.io_limit0;
+		break;
+
+	case (PCI_CB_IO_BASE_1 >> 2):
+		/* | 1 for 32bits io support */
+		data = fake_cb_bridge_regs.io_base1 | 0x1;
+		break;
+
+	case (PCI_CB_IO_LIMIT_1 >> 2):
+		data = fake_cb_bridge_regs.io_limit1;
+		break;
+	}
+
+	*val = postprocess_read(data, where, size);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * emulate configuration write access on a cardbus bridge
+ */
+static int fake_cb_bridge_write(int where, int size, u32 val)
+{
+	unsigned int reg;
+	u32 data, tmp;
+	int ret;
+
+	ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
+
+	data = preprocess_write(data, val, where, size);
+
+	reg = where >> 2;
+	switch (reg) {
+	case (PCI_COMMAND >> 2):
+		fake_cb_bridge_regs.pci_command = (data & 0xffff);
+		break;
+
+	case (PCI_CB_PRIMARY_BUS >> 2):
+		fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
+		fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
+		fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
+		fake_cb_bridge_regs.pci_busn = data & 0xff;
+		if (fake_cb_bridge_regs.cardbus_busn)
+			fake_cb_bridge_regs.bus_assigned = 1;
+		break;
+
+	case (PCI_INTERRUPT_LINE >> 2):
+		tmp = (data >> 16) & 0xffff;
+		/* disable memory prefetch support */
+		tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
+		tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
+		fake_cb_bridge_regs.bridge_control = tmp;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_0 >> 2):
+		fake_cb_bridge_regs.mem_base0 = data;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_0 >> 2):
+		fake_cb_bridge_regs.mem_limit0 = data;
+		break;
+
+	case (PCI_CB_MEMORY_BASE_1 >> 2):
+		fake_cb_bridge_regs.mem_base1 = data;
+		break;
+
+	case (PCI_CB_MEMORY_LIMIT_1 >> 2):
+		fake_cb_bridge_regs.mem_limit1 = data;
+		break;
+
+	case (PCI_CB_IO_BASE_0 >> 2):
+		fake_cb_bridge_regs.io_base0 = data;
+		break;
+
+	case (PCI_CB_IO_LIMIT_0 >> 2):
+		fake_cb_bridge_regs.io_limit0 = data;
+		break;
+
+	case (PCI_CB_IO_BASE_1 >> 2):
+		fake_cb_bridge_regs.io_base1 = data;
+		break;
+
+	case (PCI_CB_IO_LIMIT_1 >> 2):
+		fake_cb_bridge_regs.io_limit1 = data;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *val)
+{
+	/* snoop access to slot 0x1e on root bus, we fake a cardbus
+	 * bridge at this location */
+	if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
+		fake_cb_bridge_bus_number = bus->number;
+		return fake_cb_bridge_read(where, size, val);
+	}
+
+	/* a  configuration  cycle for  the  device  behind the  cardbus
+	 * bridge is  actually done as a  type 0 cycle  on the primary
+	 * bus. This means that only  one device can be on the cardbus
+	 * bus */
+	if (fake_cb_bridge_regs.bus_assigned &&
+	    bus->number == fake_cb_bridge_regs.cardbus_busn &&
+	    PCI_SLOT(devfn) == 0)
+		return bcm63xx_do_cfg_read(0, 0,
+					   PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
+					   where, size, val);
+
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 val)
+{
+	if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
+		fake_cb_bridge_bus_number = bus->number;
+		return fake_cb_bridge_write(where, size, val);
+	}
+
+	if (fake_cb_bridge_regs.bus_assigned &&
+	    bus->number == fake_cb_bridge_regs.cardbus_busn &&
+	    PCI_SLOT(devfn) == 0)
+		return bcm63xx_do_cfg_write(0, 0,
+					    PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
+					    where, size, val);
+
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+struct pci_ops bcm63xx_cb_ops = {
+	.read   = bcm63xx_cb_read,
+	.write   = bcm63xx_cb_write,
+};
+
+/*
+ * only one IO window, so it  cannot be shared by PCI and cardbus, use
+ * fixup to choose and detect unhandled configuration
+ */
+static void bcm63xx_fixup(struct pci_dev *dev)
+{
+	static int io_window = -1;
+	int i, found, new_io_window;
+	u32 val;
+
+	/* look for any io resource */
+	found = 0;
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		return;
+
+	/* skip our fake bus with only cardbus bridge on it */
+	if (dev->bus->number == fake_cb_bridge_bus_number)
+		return;
+
+	/* find on which bus the device is */
+	if (fake_cb_bridge_regs.bus_assigned &&
+	    dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
+	    PCI_SLOT(dev->devfn) == 0)
+		new_io_window = 1;
+	else
+		new_io_window = 0;
+
+	if (new_io_window == io_window)
+		return;
+
+	if (io_window != -1) {
+		printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
+		       "need IO, which hardware cannot do\n");
+		return;
+	}
+
+	printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
+	       (new_io_window == 0) ? "PCI" : "cardbus");
+
+	val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
+	if (io_window)
+		val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
+	else
+		val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
+	bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
+
+	io_window = new_io_window;
+}
+
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
+#endif
diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c
new file mode 100644
index 00000000000..82e0fde1dba
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.c
@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+
+#include "pci-bcm63xx.h"
+
+/*
+ * Allow PCI to be disabled at runtime depending on board nvram
+ * configuration
+ */
+int bcm63xx_pci_enabled;
+
+static struct resource bcm_pci_mem_resource = {
+	.name   = "bcm63xx PCI memory space",
+	.start  = BCM_PCI_MEM_BASE_PA,
+	.end    = BCM_PCI_MEM_END_PA,
+	.flags  = IORESOURCE_MEM
+};
+
+static struct resource bcm_pci_io_resource = {
+	.name   = "bcm63xx PCI IO space",
+	.start  = BCM_PCI_IO_BASE_PA,
+#ifdef CONFIG_CARDBUS
+	.end    = BCM_PCI_IO_HALF_PA,
+#else
+	.end    = BCM_PCI_IO_END_PA,
+#endif
+	.flags  = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_controller = {
+	.pci_ops	= &bcm63xx_pci_ops,
+	.io_resource	= &bcm_pci_io_resource,
+	.mem_resource	= &bcm_pci_mem_resource,
+};
+
+/*
+ * We handle cardbus  via a fake Cardbus bridge,  memory and io spaces
+ * have to be  clearly separated from PCI one  since we have different
+ * memory decoder.
+ */
+#ifdef CONFIG_CARDBUS
+static struct resource bcm_cb_mem_resource = {
+	.name   = "bcm63xx Cardbus memory space",
+	.start  = BCM_CB_MEM_BASE_PA,
+	.end    = BCM_CB_MEM_END_PA,
+	.flags  = IORESOURCE_MEM
+};
+
+static struct resource bcm_cb_io_resource = {
+	.name   = "bcm63xx Cardbus IO space",
+	.start  = BCM_PCI_IO_HALF_PA + 1,
+	.end    = BCM_PCI_IO_END_PA,
+	.flags  = IORESOURCE_IO
+};
+
+struct pci_controller bcm63xx_cb_controller = {
+	.pci_ops	= &bcm63xx_cb_ops,
+	.io_resource	= &bcm_cb_io_resource,
+	.mem_resource	= &bcm_cb_mem_resource,
+};
+#endif
+
+static u32 bcm63xx_int_cfg_readl(u32 reg)
+{
+	u32 tmp;
+
+	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+	tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
+	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+	iob();
+	return bcm_mpi_readl(MPI_PCICFGDATA_REG);
+}
+
+static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
+{
+	u32 tmp;
+
+	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
+	tmp |=  MPI_PCICFGCTL_WRITEEN_MASK;
+	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
+	bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
+}
+
+void __iomem *pci_iospace_start;
+
+static int __init bcm63xx_pci_init(void)
+{
+	unsigned int mem_size;
+	u32 val;
+
+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+		return -ENODEV;
+
+	if (!bcm63xx_pci_enabled)
+		return -ENODEV;
+
+	/*
+	 * configuration  access are  done through  IO space,  remap 4
+	 * first bytes to access it from CPU.
+	 *
+	 * this means that  no io access from CPU  should happen while
+	 * we do a configuration cycle,  but there's no way we can add
+	 * a spinlock for each io access, so this is currently kind of
+	 * broken on SMP.
+	 */
+	pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4);
+	if (!pci_iospace_start)
+		return -ENOMEM;
+
+	/* setup local bus to PCI access (PCI memory) */
+	val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
+	bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
+	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
+
+	/* set Cardbus IDSEL (type 0 cfg access on primary bus for
+	 * this IDSEL will be done on Cardbus instead) */
+	val = bcm_pcmcia_readl(PCMCIA_C1_REG);
+	val &= ~PCMCIA_C1_CBIDSEL_MASK;
+	val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
+	bcm_pcmcia_writel(val, PCMCIA_C1_REG);
+
+#ifdef CONFIG_CARDBUS
+	/* setup local bus to PCI access (Cardbus memory) */
+	val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
+	bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
+	val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
+	bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
+#else
+	/* disable second access windows */
+	bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
+#endif
+
+	/* setup local bus  to PCI access (IO memory),  we have only 1
+	 * IO window  for both PCI  and cardbus, but it  cannot handle
+	 * both  at the  same time,  assume standard  PCI for  now, if
+	 * cardbus card has  IO zone, PCI fixup will  change window to
+	 * cardbus */
+	val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
+	bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
+	bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
+	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
+
+	/* enable PCI related GPIO pins */
+	bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
+
+	/* setup PCI to local bus access, used by PCI device to target
+	 * local RAM while bus mastering */
+	bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
+	if (BCMCPU_IS_6358())
+		val = MPI_SP0_REMAP_ENABLE_MASK;
+	else
+		val = 0;
+	bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
+
+	bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
+	bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
+
+	mem_size = bcm63xx_get_memory_size();
+
+	/* 6348 before rev b0 exposes only 16 MB of RAM memory through
+	 * PCI, throw a warning if we have more memory */
+	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
+		if (mem_size > (16 * 1024 * 1024))
+			printk(KERN_WARNING "bcm63xx: this CPU "
+			       "revision cannot handle more than 16MB "
+			       "of RAM for PCI bus mastering\n");
+	} else {
+		/* setup sp0 range to local RAM size */
+		bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
+		bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
+	}
+
+	/* change  host bridge  retry  counter to  infinite number  of
+	 * retry,  needed for  some broadcom  wifi cards  with Silicon
+	 * Backplane bus where access to srom seems very slow  */
+	val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
+	val &= ~REG_TIMER_RETRY_MASK;
+	bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
+
+	/* enable memory decoder and bus mastering */
+	val = bcm63xx_int_cfg_readl(PCI_COMMAND);
+	val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	bcm63xx_int_cfg_writel(val, PCI_COMMAND);
+
+	/* enable read prefetching & disable byte swapping for bus
+	 * mastering transfers */
+	val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
+	val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
+	val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
+	val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
+	val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
+	bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
+
+	/* enable pci interrupt */
+	val = bcm_mpi_readl(MPI_LOCINT_REG);
+	val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
+	bcm_mpi_writel(val, MPI_LOCINT_REG);
+
+	register_pci_controller(&bcm63xx_controller);
+
+#ifdef CONFIG_CARDBUS
+	register_pci_controller(&bcm63xx_cb_controller);
+#endif
+
+	/* mark memory space used for IO mapping as reserved */
+	request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
+			   "bcm63xx PCI IO space");
+	return 0;
+}
+
+arch_initcall(bcm63xx_pci_init);
diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h
new file mode 100644
index 00000000000..a6e594ef3d6
--- /dev/null
+++ b/arch/mips/pci/pci-bcm63xx.h
@@ -0,0 +1,27 @@
+#ifndef PCI_BCM63XX_H_
+#define PCI_BCM63XX_H_
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_dev_pci.h>
+
+/*
+ * Cardbus shares  the PCI bus, but has  no IDSEL, so a  special id is
+ * reserved for it.  If you have a standard PCI device at this id, you
+ * need to change the following definition.
+ */
+#define CARDBUS_PCI_IDSEL	0x8
+
+/*
+ * defined in ops-bcm63xx.c
+ */
+extern struct pci_ops bcm63xx_pci_ops;
+extern struct pci_ops bcm63xx_cb_ops;
+
+/*
+ * defined in pci-bcm63xx.c
+ */
+extern void __iomem *pci_iospace_start;
+
+#endif /* ! PCI_BCM63XX_H_ */
-- 
cgit v1.2.3


From 9b1fc55a05006523bced65f4d99f7072831ff56a Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Tue, 18 Aug 2009 13:23:40 +0100
Subject: MIPS: BCM63xx: Add integrated ethernet mac support.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/bcm63xx/Makefile   |   2 +-
 arch/mips/bcm63xx/dev-enet.c | 159 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 160 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm63xx/dev-enet.c

(limited to 'arch')

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index 99bbc8753a2..aaa585cf26e 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,5 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o
+		   dev-dsp.o dev-enet.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/dev-enet.c b/arch/mips/bcm63xx/dev-enet.c
new file mode 100644
index 00000000000..9f544badd0b
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-enet.c
@@ -0,0 +1,159 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_dev_enet.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource shared_res[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bcm63xx_enet_shared_device = {
+	.name		= "bcm63xx_enet_shared",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(shared_res),
+	.resource	= shared_res,
+};
+
+static int shared_device_registered;
+
+static struct resource enet0_res[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct bcm63xx_enet_platform_data enet0_pd;
+
+static struct platform_device bcm63xx_enet0_device = {
+	.name		= "bcm63xx_enet",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(enet0_res),
+	.resource	= enet0_res,
+	.dev		= {
+		.platform_data = &enet0_pd,
+	},
+};
+
+static struct resource enet1_res[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct bcm63xx_enet_platform_data enet1_pd;
+
+static struct platform_device bcm63xx_enet1_device = {
+	.name		= "bcm63xx_enet",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(enet1_res),
+	.resource	= enet1_res,
+	.dev		= {
+		.platform_data = &enet1_pd,
+	},
+};
+
+int __init bcm63xx_enet_register(int unit,
+				 const struct bcm63xx_enet_platform_data *pd)
+{
+	struct platform_device *pdev;
+	struct bcm63xx_enet_platform_data *dpd;
+	int ret;
+
+	if (unit > 1)
+		return -ENODEV;
+
+	if (!shared_device_registered) {
+		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
+		shared_res[0].end = shared_res[0].start;
+		if (BCMCPU_IS_6338())
+			shared_res[0].end += (RSET_ENETDMA_SIZE / 2)  - 1;
+		else
+			shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+
+		ret = platform_device_register(&bcm63xx_enet_shared_device);
+		if (ret)
+			return ret;
+		shared_device_registered = 1;
+	}
+
+	if (unit == 0) {
+		enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0);
+		enet0_res[0].end = enet0_res[0].start;
+		enet0_res[0].end += RSET_ENET_SIZE - 1;
+		enet0_res[1].start = bcm63xx_get_irq_number(IRQ_ENET0);
+		enet0_res[2].start = bcm63xx_get_irq_number(IRQ_ENET0_RXDMA);
+		enet0_res[3].start = bcm63xx_get_irq_number(IRQ_ENET0_TXDMA);
+		pdev = &bcm63xx_enet0_device;
+	} else {
+		enet1_res[0].start = bcm63xx_regset_address(RSET_ENET1);
+		enet1_res[0].end = enet1_res[0].start;
+		enet1_res[0].end += RSET_ENET_SIZE - 1;
+		enet1_res[1].start = bcm63xx_get_irq_number(IRQ_ENET1);
+		enet1_res[2].start = bcm63xx_get_irq_number(IRQ_ENET1_RXDMA);
+		enet1_res[3].start = bcm63xx_get_irq_number(IRQ_ENET1_TXDMA);
+		pdev = &bcm63xx_enet1_device;
+	}
+
+	/* copy given platform data */
+	dpd = pdev->dev.platform_data;
+	memcpy(dpd, pd, sizeof(*pd));
+
+	/* adjust them in case internal phy is used */
+	if (dpd->use_internal_phy) {
+
+		/* internal phy only exists for enet0 */
+		if (unit == 1)
+			return -ENODEV;
+
+		dpd->phy_id = 1;
+		dpd->has_phy_interrupt = 1;
+		dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY);
+	}
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		return ret;
+	return 0;
+}
-- 
cgit v1.2.3


From 9a5963eb494c8a7be65199e15854551df7d2d939 Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Wed, 16 Sep 2009 21:56:49 +0200
Subject: oprofile: fix oprofile regression: select RING_BUFFER_ALLOW_SWAP

commit 85bac32c4a52c592b857f2c360cc5ec93a097d70
    ring-buffer: only enable ring_buffer_swap_cpu when needed
broke oprofile (at least on s390, but likely on all platforms).

this patch lets oprofile select RING_BUFER_ALLOW_SWAP to make
ring_buffer_swap_cpu usable for oprofile.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
LKML-Reference: <200909162156.49239.borntraeger@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/Kconfig b/arch/Kconfig
index beea3ccebb5..7f418bbc261 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -9,6 +9,7 @@ config OPROFILE
 	depends on TRACING_SUPPORT
 	select TRACING
 	select RING_BUFFER
+	select RING_BUFFER_ALLOW_SWAP
 	help
 	  OProfile is a profiling system capable of profiling the
 	  whole system, include the kernel, kernel modules, libraries,
-- 
cgit v1.2.3


From dcb73bf402e0d5b28ce925dbbe4dab3b00b21eee Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Wed, 16 Sep 2009 14:28:03 -0700
Subject: x86, pat: don't use rb-tree based lookup in reserve_memtype()

Recent enhancement of rb-tree based lookup exposed a  bug with the lookup
mechanism in the reserve_memtype() which ensures that there are no conflicting
memtype requests for the memory range.

memtype_rb_search() returns an entry which has a start address <= new start
address. And from here we traverse the linear linked list to check if there
any conflicts with the existing mappings. As the rbtree is based on the
start address of the memory range, it is quite possible that we have several
overlapped mappings whose start address is much less than new requested start
but the end is >= new requested end. This results in conflicting memtype
mappings.

Same bug exists with the old code which uses cached_entry from where
we traverse the linear linked list. But the new rb-tree code exposes this
bug fairly easily.

For now, don't use the memtype_rb_search() and always start the search from
the head of linear linked list in reserve_memtype(). Linear linked list
for most of the systems grow's to few 10's of entries(as we track memory type
of RAM pages using struct page). So we should be ok for now.

We still retain the rbtree and use it to speed up free_memtype() which
doesn't have the same bug(as we know what exactly we are searching for
in free_memtype).

Also use list_for_each_entry_from() in free_memtype() so that we start
the search from rb-tree lookup result.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <1253136483.4119.12.camel@sbs-t61.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index d2a72abc9de..9b647f67938 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -424,17 +424,9 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
-	entry = memtype_rb_search(&memtype_rbroot, new->start);
-	if (likely(entry != NULL)) {
-		/* To work correctly with list_for_each_entry_continue */
-		entry = list_entry(entry->nd.prev, struct memtype, nd);
-	} else {
-		entry = list_entry(&memtype_list, struct memtype, nd);
-	}
-
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
-	list_for_each_entry_continue(entry, &memtype_list, nd) {
+	list_for_each_entry(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
 			break;
@@ -532,7 +524,7 @@ int free_memtype(u64 start, u64 end)
 	 * in sorted start address
 	 */
 	saved_entry = entry;
-	list_for_each_entry(entry, &memtype_list, nd) {
+	list_for_each_entry_from(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
 			rb_erase(&entry->rb, &memtype_rbroot);
 			list_del(&entry->nd);
-- 
cgit v1.2.3


From 87ba00515657eede6077fa195ca6592b98cc31e3 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 17 Sep 2009 17:46:46 -0700
Subject: sparc64: vio: Kill BUILD_BUG_ON() in vio_dring_avail().

GCC can't see the 'constant' properly as computed by
is_power_of_2() etc.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/vio.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
index d4de32f0f8a..9d83d3bcb49 100644
--- a/arch/sparc/include/asm/vio.h
+++ b/arch/sparc/include/asm/vio.h
@@ -258,8 +258,6 @@ static inline void *vio_dring_entry(struct vio_dring_state *dr,
 static inline u32 vio_dring_avail(struct vio_dring_state *dr,
 				  unsigned int ring_size)
 {
-	BUILD_BUG_ON(!is_power_of_2(ring_size));
-
 	return (dr->pending -
 		((dr->prod - dr->cons) & (ring_size - 1)));
 }
-- 
cgit v1.2.3


From bc3eb7076b2b808f79abd4bd33b6a7feebb6f5d5 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Fri, 18 Sep 2009 07:49:25 +0200
Subject: x86: Remove final bits of CONFIG_X86_OLD_MCE

Caught by Linus.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
[ fixed up context conflict manually. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/power/cpu.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 417c9f5b4af..8aa85f17667 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -243,10 +243,6 @@ static void __restore_processor_state(struct saved_context *ctxt)
 
 	do_fpu_end();
 	mtrr_bp_restore();
-
-#ifdef CONFIG_X86_OLD_MCE
-	mcheck_init(&boot_cpu_data);
-#endif
 }
 
 /* Needed by apm.c */
-- 
cgit v1.2.3


From c2777f98c205148f1a0d4f9ac03b9cb20b39b2da Mon Sep 17 00:00:00 2001
From: Daniel Walker <dwalker@fifo99.com>
Date: Sat, 12 Sep 2009 10:40:20 -0700
Subject: x86: apic: Convert BUG() to BUG_ON()

This was done using Coccinelle's BUG_ON semantic patch.

Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Cc: Julia Lawall <julia@diku.dk>
LKML-Reference: <1252777220-30796-1-git-send-email-dwalker@fifo99.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 159740decc4..79e5b92a580 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1196,8 +1196,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Double-check whether this APIC is really registered.
 	 * This is meaningless in clustered apic mode, so we skip it.
 	 */
-	if (!apic->apic_id_registered())
-		BUG();
+	BUG_ON(!apic->apic_id_registered());
 
 	/*
 	 * Intel recommends to set DFR, LDR and TPR before enabling
-- 
cgit v1.2.3


From d2374aecda3f6c9b0d13287027132a37311da300 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Wed, 9 Sep 2009 10:41:05 -0500
Subject: x86: SGI UV: Fix IPI macros

The UV BIOS has changed the way interrupt remapping is being done.
This affects the id used for sending IPIs. The upper id bits no
longer need to be masked off.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090909154104.GA25083@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uv/uv_hub.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 77a68505419..03a0cbdb305 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -422,7 +422,7 @@ static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
 	unsigned long val;
 
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
-			((apicid & 0x3f) << UVH_IPI_INT_APIC_ID_SHFT) |
+			((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
 			(vector << UVH_IPI_INT_VECTOR_SHFT);
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
-- 
cgit v1.2.3


From 8dc579e868addafd24c0a015c12f0e536b1084b1 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Thu, 10 Sep 2009 09:31:49 -0500
Subject: x86: SGI UV: Add volatile semantics to macros that access chipset
 registers

Add volatile-semantics to the SGI UV read/write macros that are
used to access chipset memory mapped registers. No direct
references to volatile are made. Instead the readq/writeq macros
are used.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Cc: dwalker@fifo99.com
Cc: cfriesen@nortel.com
LKML-Reference: <20090910143149.GA14273@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uv/uv_hub.h | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 03a0cbdb305..04eb6c958b9 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -15,6 +15,7 @@
 #include <linux/numa.h>
 #include <linux/percpu.h>
 #include <linux/timer.h>
+#include <linux/io.h>
 #include <asm/types.h>
 #include <asm/percpu.h>
 #include <asm/uv/uv_mmrs.h>
@@ -258,13 +259,13 @@ static inline unsigned long *uv_global_mmr32_address(int pnode,
 static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
 				 unsigned long val)
 {
-	*uv_global_mmr32_address(pnode, offset) = val;
+	writeq(val, uv_global_mmr32_address(pnode, offset));
 }
 
 static inline unsigned long uv_read_global_mmr32(int pnode,
 						 unsigned long offset)
 {
-	return *uv_global_mmr32_address(pnode, offset);
+	return readq(uv_global_mmr32_address(pnode, offset));
 }
 
 /*
@@ -281,13 +282,13 @@ static inline unsigned long *uv_global_mmr64_address(int pnode,
 static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
 				unsigned long val)
 {
-	*uv_global_mmr64_address(pnode, offset) = val;
+	writeq(val, uv_global_mmr64_address(pnode, offset));
 }
 
 static inline unsigned long uv_read_global_mmr64(int pnode,
 						 unsigned long offset)
 {
-	return *uv_global_mmr64_address(pnode, offset);
+	return readq(uv_global_mmr64_address(pnode, offset));
 }
 
 /*
@@ -301,22 +302,22 @@ static inline unsigned long *uv_local_mmr_address(unsigned long offset)
 
 static inline unsigned long uv_read_local_mmr(unsigned long offset)
 {
-	return *uv_local_mmr_address(offset);
+	return readq(uv_local_mmr_address(offset));
 }
 
 static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
 {
-	*uv_local_mmr_address(offset) = val;
+	writeq(val, uv_local_mmr_address(offset));
 }
 
 static inline unsigned char uv_read_local_mmr8(unsigned long offset)
 {
-	return *((unsigned char *)uv_local_mmr_address(offset));
+	return readb(uv_local_mmr_address(offset));
 }
 
 static inline void uv_write_local_mmr8(unsigned long offset, unsigned char val)
 {
-	*((unsigned char *)uv_local_mmr_address(offset)) = val;
+	writeb(val, uv_local_mmr_address(offset));
 }
 
 /*
-- 
cgit v1.2.3


From daf7b9c9216e2b82e4c14b7248a85286dab021c3 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Wed, 9 Sep 2009 10:43:39 -0500
Subject: x86: SGI UV: Map MMIO-High memory range

UV depends on the MMRHI space being identity mapped. The patch:

	x86: Make 64-bit efi_ioremap use ioremap on MMIO regions

changed this to make efi regions at a different address using
ioremap. Add the identity mapping to uv_system_init.

( Note this code was previously present but was deleted when BIOS
  added the ranges to the EFI map - previous efi code identify
  mapped the ranges. )

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20090909154339.GA7946@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 601159374e8..f5f5886a6b5 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -389,6 +389,16 @@ static __init void map_gru_high(int max_pnode)
 		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
 }
 
+static __init void map_mmr_high(int max_pnode)
+{
+	union uvh_rh_gam_mmr_overlay_config_mmr_u mmr;
+	int shift = UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT;
+
+	mmr.v = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR);
+	if (mmr.s.enable)
+		map_high("MMR", mmr.s.base, shift, max_pnode, map_uc);
+}
+
 static __init void map_mmioh_high(int max_pnode)
 {
 	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
@@ -643,6 +653,7 @@ void __init uv_system_init(void)
 	}
 
 	map_gru_high(max_pnode);
+	map_mmr_high(max_pnode);
 	map_mmioh_high(max_pnode);
 
 	uv_cpu_init();
-- 
cgit v1.2.3


From 7715a1e887c5dedc9cf1e57a8f35df261c749b08 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Fri, 18 Sep 2009 03:41:10 -0700
Subject: x86/PCI: default pcibus cpumask to all cpus if it lacks affinity

The early initialization of the pci bus to node mapping leaves all busses
with a node id of -1 if it lacks memory affinity.  Thus, cpumask_of_pcibus
must return all online cpus for such busses.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/include/asm/pci.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index f76a162c082..ada8c201d51 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -143,7 +143,11 @@ static inline int __pcibus_to_node(const struct pci_bus *bus)
 static inline const struct cpumask *
 cpumask_of_pcibus(const struct pci_bus *bus)
 {
-	return cpumask_of_node(__pcibus_to_node(bus));
+	int node;
+
+	node = __pcibus_to_node(bus);
+	return (node == -1) ? cpu_online_mask :
+			      cpumask_of_node(node);
 }
 #endif
 
-- 
cgit v1.2.3


From 76baeebf7df493703eeb4428eac015bdb7fabda6 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri, 18 Sep 2009 09:13:57 -0700
Subject: x86/PCI: make 32 bit NUMA node array int, not unsigned char

We use -1 to indicate no node affinity, so we need a signed type here or
all sorts of bad things happen, like crashes in dev_attr_show as
reported by Ingo:

[  158.058140] warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
[  159.370562] BUG: unable to handle kernel NULL pointer dereference at (null)
[  159.372694] IP: [<ffffffff8143b722>] bitmap_scnprintf+0x72/0xd0
[  159.372694] PGD 71d3e067 PUD 7052e067 PMD 0
[  159.372694] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[  159.372694] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/local_cpus
[  159.372694] CPU 0
[  159.372694] Pid: 7364, comm: irqbalance Not tainted 2.6.31-tip #8043 System Product Name
[  159.372694] RIP: 0010:[<ffffffff8143b722>]  [<ffffffff8143b722>] bitmap_scnprintf+0x72/0xd0
[  159.372694] RSP: 0018:ffff8800712a1e38  EFLAGS: 00010246
[  159.372694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  159.372694] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff880077dc5000
[  159.372694] RBP: ffff8800712a1e68 R08: 0000000000000001 R09: 0000000000000001
[  159.372694] R10: ffffffff8215c47c R11: 0000000000000000 R12: 0000000000000000
[  159.372694] R13: 0000000000000000 R14: 0000000000000ffe R15: ffff880077dc5000
[  159.372694] FS:  00007f5f578f76f0(0000) GS:ffff880007000000(0000) knlGS:0000000000000000
[  159.372694] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  159.372694] CR2: 0000000000000000 CR3: 0000000071a77000 CR4: 00000000000006f0
[  159.372694] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  159.372694] DR3: ffffffff835109dc DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  159.372694] Process irqbalance (pid: 7364, threadinfo ffff8800712a0000, task ffff880070773000)
[  159.372694] Stack:
[  159.372694]  2222222222222222 ffff880077dc5000 fffffffffffffffb ffff88007d366b40
[  159.372694] <0> ffff8800712a1f48 ffff88007d3840a0 ffff8800712a1e88 ffffffff8146332b
[  159.372694] <0> fffffffffffffff4 ffffffff82450718 ffff8800712a1ea8 ffffffff815a9a1f
[  159.372694] Call Trace:
[  159.372694]  [<ffffffff8146332b>] local_cpus_show+0x3b/0x60
[  159.372694]  [<ffffffff815a9a1f>] dev_attr_show+0x2f/0x60
[  159.372694]  [<ffffffff8118ee6f>] sysfs_read_file+0xbf/0x1d0
[  159.372694]  [<ffffffff8112afe9>] vfs_read+0xc9/0x180
[  159.372694]  [<ffffffff8112c365>] sys_read+0x55/0x90
[  159.372694]  [<ffffffff810114f2>] system_call_fastpath+0x16/0x1b
[  159.372694] Code: 41 b9 01 00 00 00 44 8d 46 03 49 63 fc 0f 49 d3 c1 f8 1f 4c 01 ff c1 e8 1a c1 fa 06 41 c1 e8 02 8d 0c 03 48 63 d2 83 e1 3f 29 c1 <49> 8b 44 d5 00 48 c7 c2 8c 37 16 82 48 d3 e8 89 f1 44 89 f6 49
[  159.372694] RIP  [<ffffffff8143b722>] bitmap_scnprintf+0x72/0xd0
[  159.372694]  RSP <ffff8800712a1e38>
[  159.372694] CR2: 0000000000000000
[  159.600828] ---[ end trace 35550c356e84e60c ]---

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 5db96d4304d..1331fcf2614 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -646,7 +646,7 @@ int get_mp_bus_to_node(int busnum)
 
 #else /* CONFIG_X86_32 */
 
-static unsigned char mp_bus_to_node[BUS_NR] = {
+static int mp_bus_to_node[BUS_NR] = {
 	[0 ... BUS_NR - 1] = -1
 };
 
-- 
cgit v1.2.3


From d223246ef7e6d73c8e3d9b58f27f2eb3fe95e25d Mon Sep 17 00:00:00 2001
From: Anders Kaseorg <andersk@ksplice.com>
Date: Wed, 16 Sep 2009 16:44:26 -0400
Subject: x86: fix fragile computation of vsyscall address

Previously, the address of the vsyscall page (VSYSCALL_PHYS_ADDR,
VSYSCALL_VIRT_ADDR) was computed by arithmetic on the address of the
last section.  This leads to bugs when new sections are inserted, such
as the one fixed by commit d312ceda567ab91acd756cde95ac5fbc6b40ed40.
Let's compute it from the current address instead.

Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/vmlinux.lds.S | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 0ccb57d5ee3..b96ca472fa2 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -135,24 +135,21 @@ SECTIONS
 #ifdef CONFIG_X86_64
 
 #define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
-                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
-                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
 
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD_OFFSET (VSYSCALL_ADDR - __vsyscall_0 + LOAD_OFFSET)
 #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
 
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0)
 #define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
 
+	. = ALIGN(4096);
+	__vsyscall_0 = .;
+
 	. = VSYSCALL_ADDR;
-	.vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+	.vsyscall_0 : AT(VLOAD(.vsyscall_0)) {
 		*(.vsyscall_0)
 	} :user
 
-	__vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
 	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
 	.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
 		*(.vsyscall_fn)
@@ -192,11 +189,9 @@ SECTIONS
 		*(.vsyscall_3)
 	}
 
-	. = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+	. = __vsyscall_0 + PAGE_SIZE;
 
 #undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
 #undef VLOAD_OFFSET
 #undef VLOAD
 #undef VVIRT_OFFSET
-- 
cgit v1.2.3


From 1dc818c1c574a4caa7b575bd9018d04090fb6c86 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Wed, 16 Sep 2009 16:44:27 -0400
Subject: x86: convert compressed loader to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".

Linus suggested that we merge the ".text.head" section with ".text"
(presumably while preserving the fact that the head code starts at 0).
When I tried this it caused the kernel to not boot.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/compressed/head_32.S     | 3 ++-
 arch/x86/boot/compressed/head_64.S     | 3 ++-
 arch/x86/boot/compressed/vmlinux.lds.S | 6 ++++--
 3 files changed, 8 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 75e4f001e70..f543b70ffae 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -23,13 +23,14 @@
  */
 	.text
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-	.section ".text.head","ax",@progbits
+	__HEAD
 ENTRY(startup_32)
 	cld
 	/*
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index f62c284db9e..077e1b69198 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -24,6 +24,7 @@
 	.code32
 	.text
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/pgtable_types.h>
@@ -33,7 +34,7 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
-	.section ".text.head"
+	__HEAD
 	.code32
 ENTRY(startup_32)
 	cld
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index cc353e1b3ff..f4193bb4878 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -1,3 +1,5 @@
+#include <asm-generic/vmlinux.lds.h>
+
 OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
 
 #undef i386
@@ -18,9 +20,9 @@ SECTIONS
 	 * address 0.
 	 */
 	. = 0;
-	.text.head : {
+	.head.text : {
 		_head = . ;
-		*(.text.head)
+		HEAD_TEXT
 		_ehead = . ;
 	}
 	.rodata.compressed : {
-- 
cgit v1.2.3


From 4ae59b916d269255800d69a07ac5b0c368a417f8 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Wed, 16 Sep 2009 16:44:28 -0400
Subject: x86: convert to use __HEAD and HEAD_TEXT macros.

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  It also eliminates the
".text.head" output section (instead placing head code at the start of
the .text output section), which should be harmless.

This patch only changes the sections in the actual kernel, not those
in the compressed boot loader.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/head_32.S     |  2 +-
 arch/x86/kernel/head_64.S     |  2 +-
 arch/x86/kernel/vmlinux.lds.S | 12 +++---------
 3 files changed, 5 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 7ffec6b3b33..64ad7696786 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -79,7 +79,7 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
  * any particular GDT layout, because we load our own as soon as we
  * can.
  */
-.section .text.head,"ax",@progbits
+__HEAD
 ENTRY(startup_32)
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 		us to not reload segments */
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index fa54f78e2a0..26406601031 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -40,7 +40,7 @@ L4_START_KERNEL = pgd_index(__START_KERNEL_map)
 L3_START_KERNEL = pud_index(__START_KERNEL_map)
 
 	.text
-	.section .text.head
+	__HEAD
 	.code64
 	.globl startup_64
 startup_64:
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index b96ca472fa2..5c7826dd804 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -65,17 +65,11 @@ SECTIONS
 #endif
 
 	/* Text and read-only data */
-
-	/* bootstrapping code */
-	.text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
-		_text = .;
-		*(.text.head)
-	} :text = 0x9090
-
-	/* The rest of the text */
 	.text :  AT(ADDR(.text) - LOAD_OFFSET) {
+		_text = .;
+		/* bootstrapping code */
+		HEAD_TEXT
 #ifdef CONFIG_X86_32
-		/* not really needed, already page aligned */
 		. = ALIGN(PAGE_SIZE);
 		*(.text.page_aligned)
 #endif
-- 
cgit v1.2.3


From 07e81d61605f885920f31634a65aace52beb97db Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Wed, 16 Sep 2009 16:44:29 -0400
Subject: x86: Use section .data.page_aligned for the idt_table.

The .data.idt section is just squashed into the .data.page_aligned
output section by the linker script anyway, so it might as well be in
the .data.page_aligned section.

This eliminates all references to .data.idt on x86.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/traps.c       | 6 ++----
 arch/x86/kernel/vmlinux.lds.S | 1 -
 2 files changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 83264922a87..ea23d3b76f9 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -73,11 +73,9 @@ char ignore_fpu_irq;
 
 /*
  * The IDT has to be page-aligned to simplify the Pentium
- * F0 0F bug workaround.. We have a special link segment
- * for this.
+ * F0 0F bug workaround.
  */
-gate_desc idt_table[NR_VECTORS]
-	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
+gate_desc idt_table[NR_VECTORS] __page_aligned_data = { { { { 0, 0 } } }, };
 #endif
 
 DECLARE_BITMAP(used_vectors, NR_VECTORS);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 5c7826dd804..7d6cef363c4 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -112,7 +112,6 @@ SECTIONS
 #endif
 
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
-		*(.data.idt)
 
 		CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
 
-- 
cgit v1.2.3


From 123f3e1d76952759c0fc8b4fec55a3fc8084d56f Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Wed, 16 Sep 2009 16:44:30 -0400
Subject: x86: Cleanup linker script using new linker script macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/vmlinux.lds.S | 47 +++----------------------------------------
 1 file changed, 3 insertions(+), 44 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 7d6cef363c4..8d2d0a271e2 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -88,13 +88,7 @@ SECTIONS
 
 	NOTES :text :note
 
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	} :text = 0x9090
+	EXCEPTION_TABLE(16) :text = 0x9090
 
 	RO_DATA(PAGE_SIZE)
 
@@ -207,36 +201,12 @@ SECTIONS
 	PERCPU_VADDR(0, :percpu)
 #endif
 
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 #ifdef CONFIG_X86_64
 	:init
 #endif
 
-	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
-		INIT_DATA
-	}
-
-	. = ALIGN(16);
-	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
+	INIT_DATA_SECTION(16)
 
 	.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
 		__x86_cpu_dev_start = .;
@@ -244,8 +214,6 @@ SECTIONS
 		__x86_cpu_dev_end = .;
 	}
 
-	SECURITY_INIT
-
 	. = ALIGN(8);
 	.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
 		__parainstructions = .;
@@ -276,15 +244,6 @@ SECTIONS
 		EXIT_DATA
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
 #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
 	PERCPU(PAGE_SIZE)
 #endif
-- 
cgit v1.2.3


From 5622f295b53fb60dbf9bed3e2c89d182490a8b7f Mon Sep 17 00:00:00 2001
From: Markus Metzger <markus.t.metzger@intel.com>
Date: Tue, 15 Sep 2009 13:00:23 +0200
Subject: x86, perf_counter, bts: Optimize BTS overflow handling

Draining the BTS buffer on a buffer overflow interrupt takes too
long resulting in a kernel lockup when tracing the kernel.

Restructure perf_counter sampling into sample creation and sample
output.

Prepare a single reference sample for BTS sampling and update the
from and to address fields when draining the BTS buffer. Drain the
entire BTS buffer between a single perf_output_begin() /
perf_output_end() pair.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090915130023.A16204@sedona.ch.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 60 +++++++++++++++++++++++---------------
 1 file changed, 37 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index f9cd0849bd4..6a0e71b3812 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -36,10 +36,10 @@ static u64 perf_counter_mask __read_mostly;
 #define BTS_RECORD_SIZE		24
 
 /* The size of a per-cpu BTS buffer in bytes: */
-#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 1024)
+#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 2048)
 
 /* The BTS overflow threshold in bytes from the end of the buffer: */
-#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 64)
+#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 128)
 
 
 /*
@@ -1488,8 +1488,7 @@ void perf_counter_print_debug(void)
 	local_irq_restore(flags);
 }
 
-static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
-				       struct perf_sample_data *data)
+static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc)
 {
 	struct debug_store *ds = cpuc->ds;
 	struct bts_record {
@@ -1498,8 +1497,11 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
 		u64	flags;
 	};
 	struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
-	unsigned long orig_ip = data->regs->ip;
 	struct bts_record *at, *top;
+	struct perf_output_handle handle;
+	struct perf_event_header header;
+	struct perf_sample_data data;
+	struct pt_regs regs;
 
 	if (!counter)
 		return;
@@ -1510,19 +1512,38 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
 	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
 	top = (struct bts_record *)(unsigned long)ds->bts_index;
 
+	if (top <= at)
+		return;
+
 	ds->bts_index = ds->bts_buffer_base;
 
+
+	data.period	= counter->hw.last_period;
+	data.addr	= 0;
+	regs.ip		= 0;
+
+	/*
+	 * Prepare a generic sample, i.e. fill in the invariant fields.
+	 * We will overwrite the from and to address before we output
+	 * the sample.
+	 */
+	perf_prepare_sample(&header, &data, counter, &regs);
+
+	if (perf_output_begin(&handle, counter,
+			      header.size * (top - at), 1, 1))
+		return;
+
 	for (; at < top; at++) {
-		data->regs->ip	= at->from;
-		data->addr	= at->to;
+		data.ip		= at->from;
+		data.addr	= at->to;
 
-		perf_counter_output(counter, 1, data);
+		perf_output_sample(&handle, &header, &data, counter);
 	}
 
-	data->regs->ip	= orig_ip;
-	data->addr	= 0;
+	perf_output_end(&handle);
 
 	/* There's new data available. */
+	counter->hw.interrupts++;
 	counter->pending_kill = POLL_IN;
 }
 
@@ -1552,13 +1573,9 @@ static void x86_pmu_disable(struct perf_counter *counter)
 	x86_perf_counter_update(counter, hwc, idx);
 
 	/* Drain the remaining BTS records. */
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
-		struct perf_sample_data data;
-		struct pt_regs regs;
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS))
+		intel_pmu_drain_bts_buffer(cpuc);
 
-		data.regs = &regs;
-		intel_pmu_drain_bts_buffer(cpuc, &data);
-	}
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
 
@@ -1619,7 +1636,6 @@ static int p6_pmu_handle_irq(struct pt_regs *regs)
 	int idx, handled = 0;
 	u64 val;
 
-	data.regs = regs;
 	data.addr = 0;
 
 	cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -1644,7 +1660,7 @@ static int p6_pmu_handle_irq(struct pt_regs *regs)
 		if (!x86_perf_counter_set_period(counter, hwc, idx))
 			continue;
 
-		if (perf_counter_overflow(counter, 1, &data))
+		if (perf_counter_overflow(counter, 1, &data, regs))
 			p6_pmu_disable_counter(hwc, idx);
 	}
 
@@ -1665,13 +1681,12 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	int bit, loops;
 	u64 ack, status;
 
-	data.regs = regs;
 	data.addr = 0;
 
 	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	perf_disable();
-	intel_pmu_drain_bts_buffer(cpuc, &data);
+	intel_pmu_drain_bts_buffer(cpuc);
 	status = intel_pmu_get_status();
 	if (!status) {
 		perf_enable();
@@ -1702,7 +1717,7 @@ again:
 
 		data.period = counter->hw.last_period;
 
-		if (perf_counter_overflow(counter, 1, &data))
+		if (perf_counter_overflow(counter, 1, &data, regs))
 			intel_pmu_disable_counter(&counter->hw, bit);
 	}
 
@@ -1729,7 +1744,6 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 	int idx, handled = 0;
 	u64 val;
 
-	data.regs = regs;
 	data.addr = 0;
 
 	cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -1754,7 +1768,7 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 		if (!x86_perf_counter_set_period(counter, hwc, idx))
 			continue;
 
-		if (perf_counter_overflow(counter, 1, &data))
+		if (perf_counter_overflow(counter, 1, &data, regs))
 			amd_pmu_disable_counter(hwc, idx);
 	}
 
-- 
cgit v1.2.3


From fc5377668c3d808e1d53c4aee152c836f55c3490 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 17 Sep 2009 19:35:28 +0200
Subject: tracing: Remove markers

Now that the last users of markers have migrated to the event
tracer we can kill off the (now orphan) support code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090917173527.GA1699@lst.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/platforms/cell/spufs/file.c  | 1 -
 arch/powerpc/platforms/cell/spufs/sched.c | 1 -
 2 files changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index ab8aef9bb8e..8f079b865ad 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -29,7 +29,6 @@
 #include <linux/poll.h>
 #include <linux/ptrace.h>
 #include <linux/seq_file.h>
-#include <linux/marker.h>
 
 #include <asm/io.h>
 #include <asm/time.h>
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index bb5b77c66d0..4678078fede 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -39,7 +39,6 @@
 #include <linux/pid_namespace.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/marker.h>
 
 #include <asm/io.h>
 #include <asm/mmu_context.h>
-- 
cgit v1.2.3


From ba978365031dbe84ee8ba2d7977cb667f40caf04 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 18 Sep 2009 21:42:01 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c8c55b46934..94be7bb6cb9 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Sep 12 12:00:16 2009
+# Last update: Fri Sep 18 21:42:00 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1638,7 +1638,7 @@ mx35evb			MACH_MX35EVB		MX35EVB			1643
 aml_m8050		MACH_AML_M8050		AML_M8050		1644
 mx35_3ds		MACH_MX35_3DS		MX35_3DS		1645
 mars			MACH_MARS		MARS			1646
-ntosd_644xa		MACH_NTOSD_644XA	NTOSD_644XA		1647
+neuros_osd2		MACH_NEUROS_OSD2	NEUROS_OSD2		1647
 badger			MACH_BADGER		BADGER			1648
 trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
 trizeps5		MACH_TRIZEPS5		TRIZEPS5		1650
@@ -1654,7 +1654,7 @@ vf10xx			MACH_VF10XX		VF10XX			1659
 zoran43xx		MACH_ZORAN43XX		ZORAN43XX		1660
 sonix926		MACH_SONIX926		SONIX926		1661
 celestialsemi		MACH_CELESTIALSEMI	CELESTIALSEMI		1662
-cc9m2443		MACH_CC9M2443		CC9M2443		1663
+cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1663
 tw5334			MACH_TW5334		TW5334			1664
 omap_htcartemis		MACH_HTCARTEMIS		HTCARTEMIS		1665
 nal_hlite		MACH_NAL_HLITE		NAL_HLITE		1666
@@ -1802,7 +1802,7 @@ ccw9p9215js		MACH_CCW9P9215JS	CCW9P9215JS		1811
 rd88f5181l_ge		MACH_RD88F5181L_GE	RD88F5181L_GE		1812
 sifmain			MACH_SIFMAIN		SIFMAIN			1813
 sam9_l9261		MACH_SAM9_L9261		SAM9_L9261		1814
-cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1815
+cc9m2443		MACH_CC9M2443		CC9M2443		1815
 xaria300		MACH_XARIA300		XARIA300		1816
 it9200			MACH_IT9200		IT9200			1817
 rd88f5181l_fxo		MACH_RD88F5181L_FXO	RD88F5181L_FXO		1818
@@ -2409,3 +2409,15 @@ platypus		MACH_PLATYPUS		PLATYPUS		2422
 pss2			MACH_PSS2		PSS2			2423
 davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
 str9100			MACH_STR9100		STR9100			2425
+net5big			MACH_NET5BIG		NET5BIG			2426
+seabed9263		MACH_SEABED9263		SEABED9263		2427
+mx51_m2id		MACH_MX51_M2ID		MX51_M2ID		2428
+octvocplus_eb		MACH_OCTVOCPLUS_EB	OCTVOCPLUS_EB		2429
+klk_firefox		MACH_KLK_FIREFOX	KLK_FIREFOX		2430
+klk_wirma_module	MACH_KLK_WIRMA_MODULE	KLK_WIRMA_MODULE	2431
+klk_wirma_mmi		MACH_KLK_WIRMA_MMI	KLK_WIRMA_MMI		2432
+supersonic		MACH_SUPERSONIC		SUPERSONIC		2433
+liberty			MACH_LIBERTY		LIBERTY			2434
+mh355			MACH_MH355		MH355			2435
+pc7802			MACH_PC7802		PC7802			2436
+gnet_sgc		MACH_GNET_SGC		GNET_SGC		2437
-- 
cgit v1.2.3


From 88ddb81e0f56cc7b603174d9666ecc80237425a0 Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 18 Sep 2009 15:52:07 -0400
Subject: frv: remove unused .altinstructions code

It appears that frv copied the .altinstructions definitions in its linker
script from x86. Since frv doesn't put anything in those sections, this
is just dead code.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/vmlinux.lds.S | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index 7dbf41f68b5..cfb41813193 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -51,11 +51,6 @@ SECTIONS
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
   SECURITY_INIT
-  . = ALIGN(4);
-  __alt_instructions = .;
-  .altinstructions : { *(.altinstructions) }
-  __alt_instructions_end = .;
- .altinstr_replacement : { *(.altinstr_replacement) }
 
   PERCPU(4096)
 
-- 
cgit v1.2.3


From 9c88b25bcfde51eccf2cca13d933a2948d0ca4eb Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 18 Sep 2009 15:52:08 -0400
Subject: frv: clean up linker script using new linker script macros.

This is largely a straightforward conversion. The patch results in
fewer output sections, and some data being reordered, but should have
no functional impact.

Also, note that this patch moves some data (namely, init_task and
cacheline-aligned) inside [_sdata,_edata].

Because frv already builds using -ffunction-sections -fdata-sections,
we can't use BSS_SECTION or RW_DATA_SECTION yet, since they do not
currently include the required .bss.* and .data.* sections.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/vmlinux.lds.S | 61 +++++--------------------------------------
 1 file changed, 7 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index cfb41813193..cbe811fccfc 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -35,45 +35,13 @@ SECTIONS
 #endif
   }
   _einittext = .;
-  .init.data : { INIT_DATA }
-
-  . = ALIGN(8);
-  __setup_start = .;
-  .setup.init : { KEEP(*(.init.setup)) }
-  __setup_end = .;
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-  SECURITY_INIT
 
+  INIT_DATA_SECTION(8)
   PERCPU(4096)
 
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  . = ALIGN(THREAD_SIZE);
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
-  /* put sections together that have massive alignment issues */
-  . = ALIGN(THREAD_SIZE);
-  .data.init_task : {
-	  /* init task record & stack */
-	  *(.data.init_task)
-  }
-
-  . = ALIGN(L1_CACHE_BYTES);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
   .trap : {
 	/* trap table management - read entry-table.S before modifying */
 	. = ALIGN(8192);
@@ -119,13 +87,12 @@ SECTIONS
 
 	}
 
-  . = ALIGN(8);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { KEEP(*(__ex_table)) }
-  __stop___ex_table = .;
+  EXCEPTION_TABLE(8)
 
   _sdata = .;
   .data : {			/* Data */
+	INIT_TASK_DATA(THREAD_SIZE)
+	CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 	DATA_DATA
 	*(.data.*)
 	EXIT_DATA
@@ -154,22 +121,8 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   __kernel_image_end = .;
 
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-
-  .debug_line		0 : { *(.debug_line) }
-  .debug_info		0 : { *(.debug_info) }
-  .debug_abbrev		0 : { *(.debug_abbrev) }
-  .debug_aranges	0 : { *(.debug_aranges) }
-  .debug_frame		0 : { *(.debug_frame) }
-  .debug_pubnames	0 : { *(.debug_pubnames) }
-  .debug_str		0 : { *(.debug_str) }
-  .debug_ranges		0 : { *(.debug_ranges) }
+  STABS_DEBUG
+  DWARF_DEBUG
 
   .comment 0 : { *(.comment) }
 
-- 
cgit v1.2.3


From 3240a77b515f4a15e24d8a3a2135bc87b02cf1d6 Mon Sep 17 00:00:00 2001
From: Geoffrey Thomas <geofft@ksplice.com>
Date: Fri, 18 Sep 2009 15:52:09 -0400
Subject: sparc: Clean up linker script using new linker script macros.

Signed-off-by: Geoffrey Thomas <geofft@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc/kernel/vmlinux.lds.S | 75 ++++-------------------------------------
 1 file changed, 7 insertions(+), 68 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index 866390feb68..4e599259396 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -51,70 +51,27 @@ SECTIONS
 	_etext = .;
 
 	RO_DATA(PAGE_SIZE)
-	.data :	{
-		DATA_DATA
-		CONSTRUCTORS
-	}
 	.data1 : {
 		*(.data1)
 	}
-	. = ALIGN(SMP_CACHE_BYTES);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
-	. = ALIGN(SMP_CACHE_BYTES);
-	.data.read_mostly : {
-		*(.data.read_mostly)
-	}
+	RW_DATA_SECTION(SMP_CACHE_BYTES, 0, THREAD_SIZE)
+
 	/* End of data section */
 	_edata = .;
 
-	/* init_task */
-	. = ALIGN(THREAD_SIZE);
-	.data.init_task : {
-		*(.data.init_task)
-	}
 	.fixup : {
 		__start___fixup = .;
 		*(.fixup)
 		__stop___fixup = .;
 	}
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 	NOTES
 
 	. = ALIGN(PAGE_SIZE);
-	.init.text : {
-		__init_begin = .;
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
+	__init_begin = ALIGN(PAGE_SIZE);
+	INIT_TEXT_SECTION(PAGE_SIZE)
 	__init_text_end = .;
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
+	INIT_DATA_SECTION(16)
 
 	. = ALIGN(4);
 	.tsb_ldquad_phys_patch : {
@@ -146,29 +103,11 @@ SECTIONS
 		__sun4v_2insn_patch_end = .;
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
 	PERCPU(PAGE_SIZE)
 
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
-	__bss_start = .;
-	.sbss : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.dynbss)
-		*(.bss)
-		*(COMMON)
-	}
+	BSS_SECTION(0, 0, 0)
 	_end = . ;
 
 	STABS_DEBUG
-- 
cgit v1.2.3


From a2ca00ea9398265a26eabb358bba83c8b75c463d Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 17 Sep 2009 13:10:50 +0100
Subject: ARM: 5704/1: U300 sched_clock implementation v2

This adds the long debated sched_clock() override for the weak
in-kernel jiffybased sched_clock(). The implementation is more or
less identical to the one used in arch/arm/plat-omap/common.c
and at last attempt to merge this the merge was postponed at the
request of Peter Zijlstra due to pending discussions regarding
generalized clocksource-based sched_clock() implementations by
adding a flag to the clocksource. However that discussion ended
up with the generic code needing to be rewritten and Paul Mundt
see no reason not to proceed with this for the time being as it
can be easily converted once the generic code is in place.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/timer.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index cce53204880..26d26f5100f 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -346,6 +346,21 @@ static struct clocksource clocksource_u300_1mhz = {
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+unsigned long long notrace sched_clock(void)
+{
+	return clocksource_cyc2ns(clocksource_u300_1mhz.read(
+				  &clocksource_u300_1mhz),
+				  clocksource_u300_1mhz.mult,
+				  clocksource_u300_1mhz.shift);
+}
+
 
 /*
  * This sets up the system timers, clock source and clock event.
-- 
cgit v1.2.3


From ee2b805c8eb6459cf541ef141ff70dae17af59ca Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Sat, 15 Aug 2009 15:12:05 +0100
Subject: ARM: 5678/1: SSP/SPI PL022 polarity terminology fix

The definition of the SPI clock phase for the Motorola mode of
the PL022 driver was incorrect: the spec had been interpreted as
data being recieved on rising or falling edge of the clocks while
the correct interpretation is that data can be recieved on the
first or second edge transition, falling or rising depending on
the polarity setting.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index 307d007ea7f..f0e887bea30 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -48,7 +48,7 @@ struct pl022_config_chip dummy_chip_info = {
 	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
 	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
 	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
-	.clk_phase = SSP_CLK_FALLING_EDGE,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
 	.clk_pol = SSP_CLK_POL_IDLE_LOW,
 	.ctrl_len = SSP_BITS_12,
 	.wait_state = SSP_MWIRE_WAIT_ZERO,
-- 
cgit v1.2.3


From 200b812d0084f800bc52465e273b118ff5f8141f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 18 Sep 2009 23:27:05 +0100
Subject: Clear the exclusive monitor when returning from an exception

The patch adds a CLREX or dummy STREX to the exception return path. This
is needed because several atomic/locking operations use a pair of
LDREX/STREXEQ and the EQ condition may not always be satisfied. This
would leave the exclusive monitor status set and may cause problems with
atomic/locking operations in the interrupted code.

With this patch, the atomic_set() operation can be a simple STR
instruction (on SMP systems, the global exclusive monitor is cleared by
STR anyway). Clearing the exclusive monitor during context switch is no
longer needed as this is handled by the exception return path anyway.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jamie Lokier <jamie@shareable.org>
---
 arch/arm/include/asm/atomic.h  | 26 +++++++-------------------
 arch/arm/kernel/entry-armv.S   |  7 -------
 arch/arm/kernel/entry-header.S | 14 ++++++++++++++
 3 files changed, 21 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9ed2377fe8e..d0daeab2234 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -19,31 +19,21 @@
 
 #ifdef __KERNEL__
 
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
 #define atomic_read(v)	((v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
 /*
  * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
  * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
  */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
 static inline void atomic_add(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -163,8 +153,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long flags;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3d727a8a23b..a332bc7225b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -734,13 +734,6 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
-	clrex
-#else
-	strex	r5, r4, [ip]			@ Clear exclusive monitor
-#endif
-#endif
 #if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
 #elif !defined(CONFIG_TLS_REG_EMUL)
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a4eaf4f920c..e17e3c30d95 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -76,13 +76,25 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+	ldr	r0, [sp]
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#endif
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+#endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
 	.else
@@ -98,6 +110,7 @@
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
+	clrex					@ clear the exclusive monitor
 	ldr	r0, [sp, #S_SP]			@ top of the stack
 	ldr	r1, [sp, #S_PC]			@ return address
 	tst	r0, #4				@ orig stack 8-byte aligned?
@@ -110,6 +123,7 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
+	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
-- 
cgit v1.2.3


From 74109b8913277b1dbd072039d1e0a930d2834389 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Fri, 18 Sep 2009 15:09:33 +0100
Subject: Fix "W" macro in arch/arm/include/asm/unified.h

Please, fold into 0becb088501886f37ade38762c8eaaf4263572cc
aka "Thumb-2: Add macros for the unified assembler syntax"

otherwise:

	crypto/cast6.c:372:39: error: macro "W" passed 2 arguments, but takes just 1

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/unified.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index 073e85b9b96..bc631161e9c 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -35,7 +35,9 @@
 
 #define ARM(x...)
 #define THUMB(x...)	x
+#ifdef __ASSEMBLY__
 #define W(instr)	instr.w
+#endif
 #define BSYM(sym)	sym + 1
 
 #else	/* !CONFIG_THUMB2_KERNEL */
@@ -45,7 +47,9 @@
 
 #define ARM(x...)	x
 #define THUMB(x...)
+#ifdef __ASSEMBLY__
 #define W(instr)	instr
+#endif
 #define BSYM(sym)	sym
 
 #endif	/* CONFIG_THUMB2_KERNEL */
-- 
cgit v1.2.3


From 83e686ea0291ee93b87dcdc00b96443b80de56c9 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 18 Sep 2009 23:27:07 +0100
Subject: Thumb-2: Correctly handle undefined instructions in the kernel

VFP instructions in the kernel may trigger undefined exceptions if VFP
hardware is not present. This patch corrects the loading of such Thumb-2
instructions. It also marks the "no_fp" label as a function so that the
linker generate a Thumb address.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/kernel/entry-armv.S | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index a332bc7225b..0a2ba51cf35 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -272,7 +272,15 @@ __und_svc:
 	@
 	@  r0 - instruction
 	@
+#ifndef	CONFIG_THUMB2_KERNEL
 	ldr	r0, [r2, #-4]
+#else
+	ldrh	r0, [r2, #-2]			@ Thumb instruction at LR - 2
+	and	r9, r0, #0xf800
+	cmp	r9, #0xe800			@ 32-bit instruction if xx >= 0
+	ldrhhs	r9, [r2]			@ bottom 16 bits
+	orrhs	r0, r9, r0, lsl #16
+#endif
 	adr	r9, BSYM(1f)
 	bl	call_fpe
 
@@ -678,7 +686,9 @@ ENTRY(fp_enter)
 	.word	no_fp
 	.previous
 
-no_fp:	mov	pc, lr
+ENTRY(no_fp)
+	mov	pc, lr
+ENDPROC(no_fp)
 
 __und_usr_unknown:
 	enable_irq
-- 
cgit v1.2.3


From c41debafc6e396a8e15f1f017aec7c0cf67e1b54 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:06:21 -0300
Subject: V4L/DVB (12504): soc-camera: prepare soc_camera_platform.c and its
 users for conversion

soc_camera_platform.c is only used by y SuperH ap325rxa board. This patch
converts soc_camera_platform.c and its users for the soc-camera platform-
device conversion and also extends soc-camera core to handle non-I2C cameras.

Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 arch/sh/boards/board-ap325rxa.c | 43 ++++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 327d47c25a5..7e2d2de0384 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -310,6 +310,9 @@ static int camera_set_capture(struct soc_camera_platform_info *info,
 	return ret;
 }
 
+static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev);
+static void ap325rxa_camera_del(struct soc_camera_link *icl);
+
 static struct soc_camera_platform_info camera_info = {
 	.iface = 0,
 	.format_name = "UYVY",
@@ -323,6 +326,10 @@ static struct soc_camera_platform_info camera_info = {
 	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
 	.set_capture = camera_set_capture,
+	.link = {
+		.add_device	= ap325rxa_camera_add,
+		.del_device	= ap325rxa_camera_del,
+	},
 };
 
 static struct platform_device camera_device = {
@@ -332,15 +339,20 @@ static struct platform_device camera_device = {
 	},
 };
 
-static int __init camera_setup(void)
+static int ap325rxa_camera_add(struct soc_camera_link *icl,
+			       struct device *dev)
 {
-	if (camera_probe() > 0)
-		platform_device_register(&camera_device);
+	if (icl != &camera_info.link || camera_probe() <= 0)
+		return -ENODEV;
 
-	return 0;
+	return platform_device_register(&camera_device);
 }
-late_initcall(camera_setup);
 
+static void ap325rxa_camera_del(struct soc_camera_link *icl)
+{
+	if (icl == &camera_info.link)
+		platform_device_unregister(&camera_device);
+}
 #endif /* CONFIG_I2C */
 
 static int ov7725_power(struct device *dev, int mode)
@@ -423,11 +435,19 @@ static struct ov772x_camera_info ov7725_info = {
 	},
 };
 
-static struct platform_device ap325rxa_camera = {
-	.name	= "soc-camera-pdrv",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &ov7725_info.link,
+static struct platform_device ap325rxa_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_info.link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &camera_info.link,
+		},
 	},
 };
 
@@ -438,7 +458,8 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 	&ceu_device,
 	&nand_flash_device,
 	&sdcard_cn3_device,
-	&ap325rxa_camera,
+	&ap325rxa_camera[0],
+	&ap325rxa_camera[1],
 };
 
 static struct spi_board_info ap325rxa_spi_devices[] = {
-- 
cgit v1.2.3


From bc1937b41d8253e2b554da385023a92189d38917 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:06:22 -0300
Subject: V4L/DVB (12505): soc_camera_platform: pass device pointer from
 soc-camera core on .add_device()

Add a struct device pointer to struct soc_camera_platform_info and let the user
(ap325rxa) pass it down to soc_camera_platform.c in its .add_device() method.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 arch/sh/boards/board-ap325rxa.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 7e2d2de0384..97a2fc97e10 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -345,6 +345,8 @@ static int ap325rxa_camera_add(struct soc_camera_link *icl,
 	if (icl != &camera_info.link || camera_probe() <= 0)
 		return -ENODEV;
 
+	camera_info.dev = dev;
+
 	return platform_device_register(&camera_device);
 }
 
-- 
cgit v1.2.3


From 83fe78ea02df8a992dbda8fc3397ddb2646e733e Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:34:17 -0300
Subject: V4L/DVB (12507): sh: soc-camera updates

Update ap325rxa to specify .bus_id in struct soc_camera_link explicitly, remove
unused .iface from struct soc_camera_platform_info.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 arch/sh/boards/board-ap325rxa.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 97a2fc97e10..a89eb8b8531 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -314,7 +314,6 @@ static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev);
 static void ap325rxa_camera_del(struct soc_camera_link *icl);
 
 static struct soc_camera_platform_info camera_info = {
-	.iface = 0,
 	.format_name = "UYVY",
 	.format_depth = 16,
 	.format = {
@@ -327,6 +326,7 @@ static struct soc_camera_platform_info camera_info = {
 	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
 	.set_capture = camera_set_capture,
 	.link = {
+		.bus_id		= 0,
 		.add_device	= ap325rxa_camera_add,
 		.del_device	= ap325rxa_camera_del,
 	},
@@ -430,6 +430,7 @@ static struct ov772x_camera_info ov7725_info = {
 	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
 	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
 	.link = {
+		.bus_id		= 0,
 		.power		= ov7725_power,
 		.board_info	= &ap325rxa_i2c_camera[0],
 		.i2c_adapter_id	= 0,
-- 
cgit v1.2.3


From 0bab829de1ab60d8c3cbf7e402192bb9446840b7 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 25 Aug 2009 11:34:18 -0300
Subject: V4L/DVB (12509): sh: prepare board-ap325rxa.c for v4l2-subdev
 conversion

We will be registering and unregistering the soc_camera_platform platform
device multiple times, therefore we need a .release() method and have to
nullify the kobj.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 arch/sh/boards/board-ap325rxa.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index a89eb8b8531..2d080732a96 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -329,13 +329,19 @@ static struct soc_camera_platform_info camera_info = {
 		.bus_id		= 0,
 		.add_device	= ap325rxa_camera_add,
 		.del_device	= ap325rxa_camera_del,
+		.module_name	= "soc_camera_platform",
 	},
 };
 
+static void dummy_release(struct device *dev)
+{
+}
+
 static struct platform_device camera_device = {
 	.name		= "soc_camera_platform",
 	.dev		= {
 		.platform_data	= &camera_info,
+		.release	= dummy_release,
 	},
 };
 
@@ -352,8 +358,12 @@ static int ap325rxa_camera_add(struct soc_camera_link *icl,
 
 static void ap325rxa_camera_del(struct soc_camera_link *icl)
 {
-	if (icl == &camera_info.link)
-		platform_device_unregister(&camera_device);
+	if (icl != &camera_info.link)
+		return;
+
+	platform_device_unregister(&camera_device);
+	memset(&camera_device.dev.kobj, 0,
+	       sizeof(camera_device.dev.kobj));
 }
 #endif /* CONFIG_I2C */
 
-- 
cgit v1.2.3


From 2fbd07a5f5d1295fa9b0c0564ec27da7c276a75a Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Fri, 18 Sep 2009 19:29:59 -0700
Subject: x86, apic: Use logical flat on intel with <= 8 logical cpus

On Intel platforms, we can use logical flat mode if there are <= 8
logical cpu's (irrespective of physical apic id values). This will
enable simplified and efficient IPI and device interrupt routing on
such platforms.

Fix the relevant comments while we are at it.

We can clean up default_setup_apic_routing() by using apic->probe()
but that is a different item.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "yinghai@kernel.org" <yinghai@kernel.org>
LKML-Reference: <1253327399.3948.747.camel@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c     | 26 ++++++++------------------
 arch/x86/kernel/apic/probe_64.c | 15 +++++++++++----
 2 files changed, 19 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 79e5b92a580..072aea6c630 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -61,7 +61,7 @@ unsigned int boot_cpu_physical_apicid = -1U;
 /*
  * The highest APIC ID seen during enumeration.
  *
- * This determines the messaging protocol we can use: if all APIC IDs
+ * On AMD, this determines the messaging protocol we can use: if all APIC IDs
  * are in the 0 ... 7 range, then we can use logical addressing which
  * has some performance advantages (better broadcasting).
  *
@@ -1915,24 +1915,14 @@ void __cpuinit generic_processor_info(int apicid, int version)
 		max_physical_apicid = apicid;
 
 #ifdef CONFIG_X86_32
-	/*
-	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-	 * but we need to work other dependencies like SMP_SUSPEND etc
-	 * before this can be done without some confusion.
-	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-	 *       - Ashok Raj <ashok.raj@intel.com>
-	 */
-	if (max_physical_apicid >= 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		if (num_processors > 8)
+			def_to_bigsmp = 1;
+		break;
+	case X86_VENDOR_AMD:
+		if (max_physical_apicid >= 8)
 			def_to_bigsmp = 1;
-		}
 	}
 #endif
 
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 65edc180fc8..c4cbd3080c1 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -64,16 +64,23 @@ void __init default_setup_apic_routing(void)
 			apic = &apic_x2apic_phys;
 		else
 			apic = &apic_x2apic_cluster;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 	}
 #endif
 
 	if (apic == &apic_flat) {
-		if (max_physical_apicid >= 8)
-			apic = &apic_physflat;
-		printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (num_processors > 8)
+				apic = &apic_physflat;
+			break;
+		case X86_VENDOR_AMD:
+			if (max_physical_apicid >= 8)
+				apic = &apic_physflat;
+		}
 	}
 
+	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
+
 	if (is_vsmp_box()) {
 		/* need to update phys_pkg_id */
 		apic->phys_pkg_id = apicid_phys_pkg_id;
-- 
cgit v1.2.3


From 6161352142d5fed4cd753b32e5ccde66e705b14e Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Thu, 17 Sep 2009 16:11:28 +0200
Subject: tracing, perf: Convert the power tracer into an event tracer

This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".

This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c |  7 ++-----
 arch/x86/kernel/process.c                  | 28 +++++++++-------------------
 2 files changed, 11 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 4109679863c..479cc8c418c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -33,7 +33,7 @@
 #include <linux/cpufreq.h>
 #include <linux/compiler.h>
 #include <linux/dmi.h>
-#include <trace/power.h>
+#include <trace/events/power.h>
 
 #include <linux/acpi.h>
 #include <linux/io.h>
@@ -72,8 +72,6 @@ static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
 
 static DEFINE_PER_CPU(struct aperfmperf, old_perf);
 
-DEFINE_TRACE(power_mark);
-
 /* acpi_perf_data is a pointer to percpu data. */
 static struct acpi_processor_performance *acpi_perf_data;
 
@@ -332,7 +330,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	unsigned int next_perf_state = 0; /* Index into perf table */
 	unsigned int i;
 	int result = 0;
-	struct power_trace it;
 
 	dprintk("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
 
@@ -364,7 +361,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	trace_power_mark(&it, POWER_PSTATE, next_perf_state);
+	trace_power_frequency(POWER_PSTATE, data->freq_table[next_state].frequency);
 
 	switch (data->cpu_feature) {
 	case SYSTEM_INTEL_MSR_CAPABLE:
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 071166a4ba8..7b60e390688 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -9,7 +9,7 @@
 #include <linux/pm.h>
 #include <linux/clockchips.h>
 #include <linux/random.h>
-#include <trace/power.h>
+#include <trace/events/power.h>
 #include <asm/system.h>
 #include <asm/apic.h>
 #include <asm/syscalls.h>
@@ -25,9 +25,6 @@ EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
 
-DEFINE_TRACE(power_start);
-DEFINE_TRACE(power_end);
-
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
 	*dst = *src;
@@ -299,9 +296,7 @@ static inline int hlt_use_halt(void)
 void default_idle(void)
 {
 	if (hlt_use_halt()) {
-		struct power_trace it;
-
-		trace_power_start(&it, POWER_CSTATE, 1);
+		trace_power_start(POWER_CSTATE, 1);
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
 		 * TS_POLLING-cleared state must be visible before we
@@ -314,7 +309,7 @@ void default_idle(void)
 		else
 			local_irq_enable();
 		current_thread_info()->status |= TS_POLLING;
-		trace_power_end(&it);
+		trace_power_end(0);
 	} else {
 		local_irq_enable();
 		/* loop is done by the caller */
@@ -372,9 +367,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
  */
 void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 {
-	struct power_trace it;
-
-	trace_power_start(&it, POWER_CSTATE, (ax>>4)+1);
+	trace_power_start(POWER_CSTATE, (ax>>4)+1);
 	if (!need_resched()) {
 		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
@@ -384,15 +377,14 @@ void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 		if (!need_resched())
 			__mwait(ax, cx);
 	}
-	trace_power_end(&it);
+	trace_power_end(0);
 }
 
 /* Default MONITOR/MWAIT with no hints, used for default C1 state */
 static void mwait_idle(void)
 {
-	struct power_trace it;
 	if (!need_resched()) {
-		trace_power_start(&it, POWER_CSTATE, 1);
+		trace_power_start(POWER_CSTATE, 1);
 		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
 
@@ -402,7 +394,7 @@ static void mwait_idle(void)
 			__sti_mwait(0, 0);
 		else
 			local_irq_enable();
-		trace_power_end(&it);
+		trace_power_end(0);
 	} else
 		local_irq_enable();
 }
@@ -414,13 +406,11 @@ static void mwait_idle(void)
  */
 static void poll_idle(void)
 {
-	struct power_trace it;
-
-	trace_power_start(&it, POWER_CSTATE, 0);
+	trace_power_start(POWER_CSTATE, 0);
 	local_irq_enable();
 	while (!need_resched())
 		cpu_relax();
-	trace_power_end(&it);
+	trace_power_end(0);
 }
 
 /*
-- 
cgit v1.2.3


From 2cc0bab8616a3d0ae1bae11f5cf16a582424aa91 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 12:44:18 -0700
Subject: ARM: STMP3xxx: deallocation with negative index of descriptors[]

The last deallocation is invalid. In the last iteration, i is -1.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: dmitry pervushin <dpervushin@embeddedalley.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-stmp3xxx/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
index d2f497764dc..ef88f25fb87 100644
--- a/arch/arm/plat-stmp3xxx/dma.c
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -264,7 +264,7 @@ int stmp3xxx_dma_make_chain(int ch, struct stmp37xx_circ_dma_chain *chain,
 					stmp3xxx_dma_free_command(ch,
 								  &descriptors
 								  [i]);
-				} while (i-- >= 0);
+				} while (i-- > 0);
 			}
 			return err;
 		}
-- 
cgit v1.2.3


From 3318c4bddba34be4881cfcf8cf3d56e41678b716 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@ucw.cz>
Date: Fri, 18 Sep 2009 12:44:19 -0700
Subject: ARM: spitz: fix touchscreen max presure

This fixes max_pressure for spitz's touchscreen, and is requirement
for getting reasonable pressure numbers from touchscreen driver.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/spitz.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dda310fe71c..08d08f4a383 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -296,6 +296,7 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
+	.pressure_max		= 1024,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
-- 
cgit v1.2.3


From 7da18afa423f167e7ef3c9728e584d8bf05bd55a Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 12:44:17 -0700
Subject: ARM: s3c: fix check of index into s3c_gpios[]

The check of the s3c_gpios[] index had an off-by-one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-s3c/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index 260fdc6ad68..5ff24e0f9f8 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -28,7 +28,7 @@ static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
 
 	gpn = chip->chip.base;
 	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
 		s3c_gpios[gpn] = chip;
 	}
 }
-- 
cgit v1.2.3


From 0c02a20ff7695f9c54cc7c013dda326270ccdac8 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Sat, 19 Sep 2009 09:37:23 -0700
Subject: intel-iommu: Kill DMAR_BROKEN_GFX_WA option.

Just make it depend on BROKEN for now, in case people scream really loud
about it (and because we might want to keep some of this logic for an
upcoming BIOS workaround, so I don't just want to rip it out entirely
just yet). But for graphics devices, it really ought to be unnecessary.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/x86/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 738bdc6b0f8..22a0fd13211 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1916,7 +1916,7 @@ config DMAR_DEFAULT_ON
 config DMAR_BROKEN_GFX_WA
 	def_bool n
 	prompt "Workaround broken graphics drivers (going away soon)"
-	depends on DMAR
+	depends on DMAR && BROKEN
 	---help---
 	  Current Graphics drivers tend to use physical address
 	  for DMA and avoid using DMA APIs. Setting this config
-- 
cgit v1.2.3


From 288f023e708efd89d77ce9acf977a33a623ae83d Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@infradead.org>
Date: Sat, 19 Sep 2009 13:35:33 +0200
Subject: tracing, x86, cpuidle: Move the end point of a C state in the power
 tracer

The "end of a C state" trace point currently happens before
the code runs that corrects the TSC for having stopped during idle.

The result of this is that the timestamp of the end-of-C-state event
is garbage on cpus where the TSC stops during idle.

This patch moves the end point of the C state to after the timekeeping
engine of the kernel has been corrected.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090919133533.139c2a46@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/process.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 7b60e390688..847ab416031 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -309,7 +309,6 @@ void default_idle(void)
 		else
 			local_irq_enable();
 		current_thread_info()->status |= TS_POLLING;
-		trace_power_end(0);
 	} else {
 		local_irq_enable();
 		/* loop is done by the caller */
@@ -377,7 +376,6 @@ void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 		if (!need_resched())
 			__mwait(ax, cx);
 	}
-	trace_power_end(0);
 }
 
 /* Default MONITOR/MWAIT with no hints, used for default C1 state */
@@ -394,7 +392,6 @@ static void mwait_idle(void)
 			__sti_mwait(0, 0);
 		else
 			local_irq_enable();
-		trace_power_end(0);
 	} else
 		local_irq_enable();
 }
-- 
cgit v1.2.3


From a017421ddcdf34474f1133b27e33ab2ca6c19b96 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Tue, 15 Sep 2009 17:17:27 +0200
Subject: x86, mce: Fix compile warning in case of CONFIG_SMP=n

Fix following compile warning:

  arch/x86/kernel/cpu/mcheck/mce_amd.c: In function 'threshold_create_bank':
  arch/x86/kernel/cpu/mcheck/mce_amd.c:492: warning: unused variable 'c'

which shows up when kernel is compiled with CONFIG_SMP=n.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20090915151727.GB21670@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 8cd5224943b..83a3d1f4efc 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -489,8 +489,9 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	int i, err = 0;
 	struct threshold_bank *b = NULL;
 	char name[32];
+#ifdef CONFIG_SMP
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
-
+#endif
 
 	sprintf(name, "threshold_bank%i", bank);
 
-- 
cgit v1.2.3


From 778dbcc1ebea6f9a560020110987449bf4607e5f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Fri, 18 Sep 2009 12:51:44 -0700
Subject: mtd: onenand: make onenand/generic.c more generic

Remove the ARM dependency from the generic "onenand" platform device
driver.  This change makes the driver useful for other architectures as
well.  Needed for the SuperH kfr2r09 board.

Apart from the obvious Kconfig bits, the most important change is the move
away from ARM specific includes and platform data.  Together with this
change the only in-tree board code gets an update, and the driver name is
also changed gracefully break potential out of tree drivers.

The driver is also updated to allow NULL as platform data together with a
few changes to make use of resource_size() and dev_name().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/mach-omap2/board-apollon.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index dcfc20d0389..b4d4ef6d90b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -87,7 +87,7 @@ static struct mtd_partition apollon_partitions[] = {
 	},
 };
 
-static struct flash_platform_data apollon_flash_data = {
+static struct onenand_platform_data apollon_flash_data = {
 	.parts		= apollon_partitions,
 	.nr_parts	= ARRAY_SIZE(apollon_partitions),
 };
@@ -99,7 +99,7 @@ static struct resource apollon_flash_resource[] = {
 };
 
 static struct platform_device apollon_onenand_device = {
-	.name		= "onenand",
+	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &apollon_flash_data,
-- 
cgit v1.2.3


From eda6da9286ad5b35b1eb70f6368958a8ee41a9dd Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 19 Sep 2009 11:07:57 -0700
Subject: Revert 'x86: Fix system crash when loading with "reservetop"
 parameter'

After close looking, commit 8126dec3 will break:

 1. some cpu feature  in early stage too, like cpu_has_x2apic
 2. will break built-in-command line
 3. will break other memmap= and mem=
 4. early_dbgp and early_console that will use early_ioremap to access mmio (?)

So revert it.

Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>,
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML-Reference: <4AB51DFD.2000904@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 19f15c4076f..f5baa2ae0c8 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -712,21 +712,6 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-#ifdef CONFIG_X86_64
-	/*
-	 * Must call this twice: Once just to detect whether hardware doesn't
-	 * support NX (so that the early EHCI debug console setup can safely
-	 * call set_fixmap(), and then again after parsing early parameters to
-	 * honor the respective command line option.
-	 */
-	check_efer();
-#endif
-
-	parse_early_param();
-
 	/* VMI may relocate the fixmap; do this before touching ioremap area */
 	vmi_init();
 
@@ -809,6 +794,21 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+#ifdef CONFIG_X86_64
+	/*
+	 * Must call this twice: Once just to detect whether hardware doesn't
+	 * support NX (so that the early EHCI debug console setup can safely
+	 * call set_fixmap(), and then again after parsing early parameters to
+	 * honor the respective command line option.
+	 */
+	check_efer();
+#endif
+
+	parse_early_param();
+
 #ifdef CONFIG_X86_64
 	check_efer();
 #endif
-- 
cgit v1.2.3


From e454cea20bdcff10ee698d11b8882662a0153a47 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Fri, 18 Sep 2009 23:01:12 +0200
Subject: Driver-Core: extend devnode callbacks to provide permissions

This allows subsytems to provide devtmpfs with non-default permissions
for the device node. Instead of the default mode of 0600, null, zero,
random, urandom, full, tty, ptmx now have a mode of 0666, which allows
non-privileged processes to access standard device nodes in case no
other userspace process applies the expected permissions.

This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kernel/cpuid.c          | 4 ++--
 arch/x86/kernel/microcode_core.c | 2 +-
 arch/x86/kernel/msr.c            | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index b07af886124..6a52d4b36a3 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -182,7 +182,7 @@ static struct notifier_block __refdata cpuid_class_cpu_notifier =
 	.notifier_call = cpuid_class_cpu_callback,
 };
 
-static char *cpuid_nodename(struct device *dev)
+static char *cpuid_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "cpu/%u/cpuid", MINOR(dev->devt));
 }
@@ -203,7 +203,7 @@ static int __init cpuid_init(void)
 		err = PTR_ERR(cpuid_class);
 		goto out_chrdev;
 	}
-	cpuid_class->nodename = cpuid_nodename;
+	cpuid_class->devnode = cpuid_devnode;
 	for_each_online_cpu(i) {
 		err = cpuid_device_create(i);
 		if (err != 0)
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 9371448290a..0db7969b0dd 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -236,7 +236,7 @@ static const struct file_operations microcode_fops = {
 static struct miscdevice microcode_dev = {
 	.minor			= MICROCODE_MINOR,
 	.name			= "microcode",
-	.devnode		= "cpu/microcode",
+	.nodename		= "cpu/microcode",
 	.fops			= &microcode_fops,
 };
 
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 7dd95009417..6a3cefc7dda 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -241,7 +241,7 @@ static struct notifier_block __refdata msr_class_cpu_notifier = {
 	.notifier_call = msr_class_cpu_callback,
 };
 
-static char *msr_nodename(struct device *dev)
+static char *msr_devnode(struct device *dev, mode_t *mode)
 {
 	return kasprintf(GFP_KERNEL, "cpu/%u/msr", MINOR(dev->devt));
 }
@@ -262,7 +262,7 @@ static int __init msr_init(void)
 		err = PTR_ERR(msr_class);
 		goto out_chrdev;
 	}
-	msr_class->nodename = msr_nodename;
+	msr_class->devnode = msr_devnode;
 	for_each_online_cpu(i) {
 		err = msr_device_create(i);
 		if (err != 0)
-- 
cgit v1.2.3


From ebd2c8f6d2ec4012c267ecb95e72a57b8355a705 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Sat, 19 Sep 2009 13:13:28 -0700
Subject: serial: kill off uart_info

We moved this into uart_state, now move the fields out of the separate
structure and kill it off.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/mn10300/kernel/asm-offsets.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 2646fcbd7d8..82b40079ad7 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -95,7 +95,7 @@ void foo(void)
 	OFFSET(__iobase,		mn10300_serial_port, _iobase);
 
 	DEFINE(__UART_XMIT_SIZE,	UART_XMIT_SIZE);
-	OFFSET(__xmit_buffer,		uart_info, xmit.buf);
-	OFFSET(__xmit_head,		uart_info, xmit.head);
-	OFFSET(__xmit_tail,		uart_info, xmit.tail);
+	OFFSET(__xmit_buffer,		uart_state, xmit.buf);
+	OFFSET(__xmit_head,		uart_state, xmit.head);
+	OFFSET(__xmit_tail,		uart_state, xmit.tail);
 }
-- 
cgit v1.2.3


From 59e9c5ae17179fe561103fbe0808fac5976ca1bd Mon Sep 17 00:00:00 2001
From: vimal singh <vimalsingh@ti.com>
Date: Mon, 13 Jul 2009 16:26:24 +0530
Subject: mtd: omap: add support for nand prefetch-read and post-write

This patch adds prefetch support to access nand flash in mpu mode.
This patch also adds 8-bit nand support (omap_read/write_buf8).
Prefetch can be used for both 8- and 16-bit devices.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/mach-omap2/gpmc.c             | 63 +++++++++++++++++++++++++++++++++-
 arch/arm/plat-omap/include/mach/gpmc.h |  4 +++
 2 files changed, 66 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f91934b2b09..15876828db2 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -57,6 +57,11 @@
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
 
+#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
+#define CS_NUM_SHIFT		24
+#define ENABLE_PREFETCH		(0x1 << 7)
+#define DMA_MPU_MODE		2
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -386,6 +391,63 @@ void gpmc_cs_free(int cs)
 }
 EXPORT_SYMBOL(gpmc_cs_free);
 
+/**
+ * gpmc_prefetch_enable - configures and starts prefetch transfer
+ * @cs: nand cs (chip select) number
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+int gpmc_prefetch_enable(int cs, int dma_mode,
+				unsigned int u32_count, int is_write)
+{
+	uint32_t prefetch_config1;
+
+	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+		/* Set the amount of bytes to be prefetched */
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
+
+		/* Set dma/mpu mode, the prefetch read / post write and
+		 * enable the engine. Set which cs is has requested for.
+		 */
+		prefetch_config1 = ((cs << CS_NUM_SHIFT) |
+					PREFETCH_FIFOTHRESHOLD |
+					ENABLE_PREFETCH |
+					(dma_mode << DMA_MPU_MODE) |
+					(0x1 & is_write));
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
+	} else {
+		return -EBUSY;
+	}
+	/*  Start the prefetch engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpmc_prefetch_enable);
+
+/**
+ * gpmc_prefetch_reset - disables and stops the prefetch engine
+ */
+void gpmc_prefetch_reset(void)
+{
+	/* Stop the PFPW engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
+
+	/* Reset/disable the PFPW engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
+}
+EXPORT_SYMBOL(gpmc_prefetch_reset);
+
+/**
+ * gpmc_prefetch_status - reads prefetch status of engine
+ */
+int  gpmc_prefetch_status(void)
+{
+	return gpmc_read_reg(GPMC_PREFETCH_STATUS);
+}
+EXPORT_SYMBOL(gpmc_prefetch_status);
+
 static void __init gpmc_mem_init(void)
 {
 	int cs;
@@ -452,6 +514,5 @@ void __init gpmc_init(void)
 	l &= 0x03 << 3;
 	l |= (0x02 << 3) | (1 << 0);
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
-
 	gpmc_mem_init();
 }
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 921b16532ff..9c99cda77ba 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -103,6 +103,10 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
+extern int gpmc_prefetch_enable(int cs, int dma_mode,
+					unsigned int u32_count, int is_write);
+extern void gpmc_prefetch_reset(void);
+extern int gpmc_prefetch_status(void);
 extern void __init gpmc_init(void);
 
 #endif
-- 
cgit v1.2.3


From 4765d681a4dccdc6ded7dd20329f5498aa53b0d0 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sun, 20 Sep 2009 14:38:09 +0530
Subject: includecheck fix: s390, sys_s390.c

fix the following 'make includecheck' warning:

  arch/s390/kernel/sys_s390.c: linux/syscalls.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068809.4382.111.camel@ht.satnam>
---
 arch/s390/kernel/sys_s390.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index c7ae4b17e0e..e9d94f61d50 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -29,7 +29,6 @@
 #include <linux/personality.h>
 #include <linux/unistd.h>
 #include <linux/ipc.h>
-#include <linux/syscalls.h>
 #include <asm/uaccess.h>
 #include "entry.h"
 
-- 
cgit v1.2.3


From caa27b66bd7188fd063769eaf4b33533ef0709e6 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Mon, 20 Jul 2009 21:37:11 +0200
Subject: kbuild: use INSTALLKERNEL to select customized installkernel script

Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:

    make INSTALLKERNEL=arm-installkernel install

With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.

The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.

The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]

This patch undos what Ian did in commit:

  0f8e2d62fa04441cd12c08ce521e84e5bd3f8a46
  ("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")

The patch has been lightly tested on x86 only - but all changes
looks obvious.

Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/Makefile                    | 4 ++--
 arch/arm/boot/install.sh             | 4 ++--
 arch/blackfin/Makefile               | 4 ++--
 arch/blackfin/boot/install.sh        | 6 +++---
 arch/ia64/install.sh                 | 4 ++--
 arch/m32r/boot/compressed/install.sh | 4 ++--
 arch/m68k/install.sh                 | 4 ++--
 arch/parisc/Makefile                 | 4 ++--
 arch/parisc/install.sh               | 4 ++--
 arch/powerpc/Makefile                | 4 ++--
 arch/powerpc/boot/install.sh         | 4 ++--
 arch/s390/boot/install.sh            | 4 ++--
 arch/sh/boot/compressed/install.sh   | 4 ++--
 arch/x86/Makefile                    | 4 ++--
 arch/x86/boot/install.sh             | 4 ++--
 15 files changed, 31 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7350557a81e..68c6ab0749d 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -279,7 +279,7 @@ define archhelp
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
-  echo  '                  Install using (your) ~/bin/installkernel or'
-  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
 endef
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 9f9bed20734..06ea7d42ce8 100644
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -21,8 +21,8 @@
 #
 
 # User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 6f9533c3d75..f063b772934 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -155,7 +155,7 @@ define archhelp
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
   echo  '  install         - Install kernel using'
-  echo  '                     (your) ~/bin/$(CROSS_COMPILE)installkernel or'
-  echo  '                     (distribution) PATH: $(CROSS_COMPILE)installkernel or'
+  echo  '                     (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                     (distribution) PATH: $(INSTALLKERNEL) or'
   echo  '                     install to $$(INSTALL_PATH)'
 endef
diff --git a/arch/blackfin/boot/install.sh b/arch/blackfin/boot/install.sh
index 9560a6b2910..e2c6e40902b 100644
--- a/arch/blackfin/boot/install.sh
+++ b/arch/blackfin/boot/install.sh
@@ -36,9 +36,9 @@ verify "$3"
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if which ${CROSS_COMPILE}installkernel >/dev/null 2>&1; then
-	exec ${CROSS_COMPILE}installkernel "$@"
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if which ${INSTALLKERNEL} >/dev/null 2>&1; then
+	exec ${INSTALLKERNEL} "$@"
 fi
 
 # Default install - same as make zlilo
diff --git a/arch/ia64/install.sh b/arch/ia64/install.sh
index 929e780026d..0e932f5dcd1 100644
--- a/arch/ia64/install.sh
+++ b/arch/ia64/install.sh
@@ -21,8 +21,8 @@
 
 # User may have a custom install script
 
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo
 
diff --git a/arch/m32r/boot/compressed/install.sh b/arch/m32r/boot/compressed/install.sh
index 6d72e9e7269..16e5a0a1343 100644
--- a/arch/m32r/boot/compressed/install.sh
+++ b/arch/m32r/boot/compressed/install.sh
@@ -24,8 +24,8 @@
 
 # User may have a custom install script
 
-if [ -x /sbin/installkernel ]; then
-  exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+  exec /sbin/${INSTALLKERNEL} "$@"
 fi
 
 if [ "$2" = "zImage" ]; then
diff --git a/arch/m68k/install.sh b/arch/m68k/install.sh
index 9c6bae6112e..57d640d4382 100644
--- a/arch/m68k/install.sh
+++ b/arch/m68k/install.sh
@@ -33,8 +33,8 @@ verify "$3"
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo
 
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index da6f66901c9..55cca1dac43 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -118,8 +118,8 @@ define archhelp
 	@echo  '* vmlinux	- Uncompressed kernel image (./vmlinux)'
 	@echo  '  palo		- Bootable image (./lifimage)'
 	@echo  '  install	- Install kernel using'
-	@echo  '		  (your) ~/bin/installkernel or'
-	@echo  '		  (distribution) /sbin/installkernel or'
+	@echo  '		  (your) ~/bin/$(INSTALLKERNEL) or'
+	@echo  '		  (distribution) /sbin/$(INSTALLKERNEL) or'
 	@echo  '		  copy to $$(INSTALL_PATH)'
 endef
 
diff --git a/arch/parisc/install.sh b/arch/parisc/install.sh
index 9632b3e164c..e593fc8d58b 100644
--- a/arch/parisc/install.sh
+++ b/arch/parisc/install.sh
@@ -21,8 +21,8 @@
 
 # User may have a custom install script
 
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install
 
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 952a3963e9e..13e3fd852d6 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -182,8 +182,8 @@ define archhelp
   @echo '  simpleImage.<dt> - Firmware independent image.'
   @echo '  treeImage.<dt>  - Support for older IBM 4xx firmware (not U-Boot)'
   @echo '  install         - Install kernel using'
-  @echo '                    (your) ~/bin/installkernel or'
-  @echo '                    (distribution) /sbin/installkernel or'
+  @echo '                    (your) ~/bin/$(INSTALLKERNEL) or'
+  @echo '                    (distribution) /sbin/$(INSTALLKERNEL) or'
   @echo '                    install to $$(INSTALL_PATH) and run lilo'
   @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
   @echo ''
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index 98312d169c8..b6a256bc96e 100644
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -23,8 +23,8 @@ set -e
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install
 
diff --git a/arch/s390/boot/install.sh b/arch/s390/boot/install.sh
index d4026f62cb0..aed3069699b 100644
--- a/arch/s390/boot/install.sh
+++ b/arch/s390/boot/install.sh
@@ -21,8 +21,8 @@
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo
 
diff --git a/arch/sh/boot/compressed/install.sh b/arch/sh/boot/compressed/install.sh
index 90589f0fec1..f9f41818b17 100644
--- a/arch/sh/boot/compressed/install.sh
+++ b/arch/sh/boot/compressed/install.sh
@@ -23,8 +23,8 @@
 
 # User may have a custom install script
 
-if [ -x /sbin/installkernel ]; then
-  exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+  exec /sbin/${INSTALLKERNEL} "$@"
 fi
 
 if [ "$2" = "zImage" ]; then
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 7983c420eaf..a012ee8ef80 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -179,8 +179,8 @@ archclean:
 define archhelp
   echo  '* bzImage      - Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install      - Install kernel using'
-  echo  '                  (your) ~/bin/installkernel or'
-  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  (your) ~/bin/$(INSTALLKERNEL) or'
+  echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
   echo  '  fdimage      - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
   echo  '  fdimage144   - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
diff --git a/arch/x86/boot/install.sh b/arch/x86/boot/install.sh
index 8d60ee15dfd..d13ec1c3864 100644
--- a/arch/x86/boot/install.sh
+++ b/arch/x86/boot/install.sh
@@ -33,8 +33,8 @@ verify "$3"
 
 # User may have a custom install script
 
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 # Default install - same as make zlilo
 
-- 
cgit v1.2.3


From f86fd306605287d7c7f4f0f8e8e2a9d49d28b396 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sat, 19 Sep 2009 10:14:33 +0200
Subject: kbuild: rename ld-option to cc-ldoption

ld-option is misnamed as it test options to gcc, not to ld.
Renamed it to reflect this.

Cc: Andi Kleen <andi@firstfloor.org>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/ia64/kernel/Makefile.gate      | 2 +-
 arch/powerpc/kernel/vdso32/Makefile | 2 +-
 arch/powerpc/kernel/vdso64/Makefile | 2 +-
 arch/s390/kernel/vdso32/Makefile    | 2 +-
 arch/s390/kernel/vdso64/Makefile    | 2 +-
 arch/sh/kernel/vsyscall/Makefile    | 2 +-
 arch/x86/vdso/Makefile              | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/Makefile.gate b/arch/ia64/kernel/Makefile.gate
index 1d87f84069b..ab9b03a9adc 100644
--- a/arch/ia64/kernel/Makefile.gate
+++ b/arch/ia64/kernel/Makefile.gate
@@ -10,7 +10,7 @@ quiet_cmd_gate = GATE $@
       cmd_gate = $(CC) -nostdlib $(GATECFLAGS_$(@F)) -Wl,-T,$(filter-out FORCE,$^) -o $@
 
 GATECFLAGS_gate.so = -shared -s -Wl,-soname=linux-gate.so.1 \
-		     $(call ld-option, -Wl$(comma)--hash-style=sysv)
+		     $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 $(obj)/gate.so: $(obj)/gate.lds $(obj)/gate.o FORCE
 	$(call if_changed,gate)
 
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index b54b8168813..51ead52141b 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -16,7 +16,7 @@ GCOV_PROFILE := n
 
 EXTRA_CFLAGS := -shared -fno-common -fno-builtin
 EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
-		$(call ld-option, -Wl$(comma)--hash-style=sysv)
+		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 EXTRA_AFLAGS := -D__VDSO32__ -s
 
 obj-y += vdso32_wrapper.o
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index dd0c8e93677..79da65d44a2 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -11,7 +11,7 @@ GCOV_PROFILE := n
 
 EXTRA_CFLAGS := -shared -fno-common -fno-builtin
 EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
-		$(call ld-option, -Wl$(comma)--hash-style=sysv)
+		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 EXTRA_AFLAGS := -D__VDSO64__ -s
 
 obj-y += vdso64_wrapper.o
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index ca78ad60ba2..d13e8755a8c 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -13,7 +13,7 @@ KBUILD_AFLAGS_31 += -m31 -s
 KBUILD_CFLAGS_31 := $(filter-out -m64,$(KBUILD_CFLAGS))
 KBUILD_CFLAGS_31 += -m31 -fPIC -shared -fno-common -fno-builtin
 KBUILD_CFLAGS_31 += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
-			$(call ld-option, -Wl$(comma)--hash-style=sysv)
+			$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 
 $(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_31)
 $(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_31)
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index 6fc8e829258..449352dda9c 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -13,7 +13,7 @@ KBUILD_AFLAGS_64 += -m64 -s
 KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS))
 KBUILD_CFLAGS_64 += -m64 -fPIC -shared -fno-common -fno-builtin
 KBUILD_CFLAGS_64 += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
-			$(call ld-option, -Wl$(comma)--hash-style=sysv)
+			$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 
 $(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_64)
 $(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_64)
diff --git a/arch/sh/kernel/vsyscall/Makefile b/arch/sh/kernel/vsyscall/Makefile
index 4bbce1cfa35..8f0ea5fc835 100644
--- a/arch/sh/kernel/vsyscall/Makefile
+++ b/arch/sh/kernel/vsyscall/Makefile
@@ -15,7 +15,7 @@ quiet_cmd_syscall = SYSCALL $@
 export CPPFLAGS_vsyscall.lds += -P -C -Ush
 
 vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
-		$(call ld-option, -Wl$(comma)--hash-style=sysv)
+		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 
 SYSCFLAGS_vsyscall-trapa.so	= $(vsyscall-flags)
 
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 88112b49f02..6b4ffedb93c 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -122,7 +122,7 @@ quiet_cmd_vdso = VDSO    $@
 		       $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \
 		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^)
 
-VDSO_LDFLAGS = -fPIC -shared $(call ld-option, -Wl$(comma)--hash-style=sysv)
+VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 GCOV_PROFILE := n
 
 #
-- 
cgit v1.2.3


From 51b563fc93c8cb5bff1d67a0a71c374e4a4ea049 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Sun, 20 Sep 2009 12:28:22 +0200
Subject: arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0

Albin Tonnerre <albin.tonnerre@free-electrons.com> reported:

    Bash 4 filters out variables which contain a dot in them.
    This happends to be the case of CPPFLAGS_vmlinux.lds.
    This is rather unfortunate, as it now causes
    build failures when using SHELL=/bin/bash to compile,
    or when bash happens to be used by make (eg when it's /bin/sh)

Remove the common definition of CPPFLAGS_vmlinux.lds by
pushing relevant stuff to either Makefile.build or the
arch specific kernel/Makefile where we build the linker script.

This is also nice cleanup as we move the information out where
it is used.

Notes for the different architectures touched:

arm - we use an already exported symbol
cris - we use a config symbol aleady available
       [Not build tested]
mips - the jiffies complexity has moved to vmlinux.lds.S where we need it.
       Added a few variables to CPPFLAGS - they are only used by
       the linker script.
       [Not build tested]
powerpc - removed assignment that is not needed
          [not build tested]
sparc - simplified it using $(BITS)
um - introduced a few new exported variables to deal with this
xtensa - added options to CPP invocation
         [not build tested]

Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/Makefile              |  2 +-
 arch/arm/kernel/Makefile       |  3 ++-
 arch/cris/Makefile             |  2 --
 arch/cris/kernel/Makefile      |  1 +
 arch/mips/Makefile             | 27 +++------------------------
 arch/mips/kernel/vmlinux.lds.S | 13 +++++++++++--
 arch/powerpc/Makefile          |  2 --
 arch/sparc/Makefile            |  4 ----
 arch/sparc/kernel/Makefile     |  6 +++++-
 arch/um/Makefile               |  9 ++++-----
 arch/um/kernel/Makefile        |  3 +++
 arch/um/kernel/vmlinux.lds.S   |  3 +++
 arch/xtensa/kernel/Makefile    |  3 ++-
 13 files changed, 35 insertions(+), 43 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 68c6ab0749d..c695fdac5b3 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -14,7 +14,7 @@ LDFLAGS_vmlinux	:=-p --no-undefined -X
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 endif
-CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
+
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 3213c9382b1..c446aeff7b8 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -2,7 +2,8 @@
 # Makefile for the linux kernel.
 #
 
-AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
+AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
 ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index 71e17d3eedd..29c2ceb38a7 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -42,8 +42,6 @@ LD = $(CROSS_COMPILE)ld -mcrislinux
 
 OBJCOPYFLAGS := -O binary -R .note -R .comment -S
 
-CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
-
 KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc)
 KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc)
 KBUILD_CPPFLAGS += $(inc)
diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile
index ee7bcd4d20b..b45640b3e60 100644
--- a/arch/cris/kernel/Makefile
+++ b/arch/cris/kernel/Makefile
@@ -3,6 +3,7 @@
 # Makefile for the linux kernel.
 #
 
+CPPFLAGS_vmlinux.lds := -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
 extra-y	:= vmlinux.lds
 
 obj-y   := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index c825b14b4ed..77f5021218d 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -627,16 +627,6 @@ endif
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
-ifdef CONFIG_32BIT
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-JIFFIES			= jiffies_64
-else
-JIFFIES			= jiffies_64 + 4
-endif
-else
-JIFFIES			= jiffies_64
-endif
-
 #
 # Automatically detect the build format. By default we choose
 # the elf format according to the load address.
@@ -660,8 +650,9 @@ ifdef CONFIG_64BIT
 endif
 
 KBUILD_AFLAGS	+= $(cflags-y)
-KBUILD_CFLAGS	+= $(cflags-y) \
-			-D"VMLINUX_LOAD_ADDRESS=$(load-y)"
+KBUILD_CFLAGS	+= $(cflags-y)
+KBUILD_CPPFLAGS += -D"VMLINUX_LOAD_ADDRESS=$(load-y)"
+KBUILD_CPPFLAGS += -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
 
 LDFLAGS			+= -m $(ld-emul)
 
@@ -676,18 +667,6 @@ endif
 
 OBJCOPYFLAGS		+= --remove-section=.reginfo
 
-#
-# Choosing incompatible machines durings configuration will result in
-# error messages during linking.  Select a default linkscript if
-# none has been choosen above.
-#
-
-CPPFLAGS_vmlinux.lds := \
-	$(KBUILD_CFLAGS) \
-	-D"LOADADDR=$(load-y)" \
-	-D"JIFFIES=$(JIFFIES)" \
-	-D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
-
 head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
 
 libs-y			+= arch/mips/lib/
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 2769bed3d2a..9bf0e3df7c5 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -10,7 +10,16 @@ PHDRS {
 	text PT_LOAD FLAGS(7);	/* RWX */
 	note PT_NOTE FLAGS(4);	/* R__ */
 }
-jiffies = JIFFIES;
+
+ifdef CONFIG_32BIT
+	ifdef CONFIG_CPU_LITTLE_ENDIAN
+		jiffies  = jiffies_64;
+	else
+		jiffies  = jiffies_64 + 4;
+	endif
+else
+	jiffies  = jiffies_64;
+endif
 
 SECTIONS
 {
@@ -29,7 +38,7 @@ SECTIONS
 	/* . = 0xa800000000300000; */
 	. = 0xffffffff80300000;
 #endif
-	. = LOADADDR;
+	. = VMLINUX_LOAD_ADDRESS;
 	/* read-only */
 	_text = .;	/* Text and read-only data */
 	.text : {
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 13e3fd852d6..aacf629c1a9 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -158,8 +158,6 @@ drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 # Default to zImage, override when needed
 all: zImage
 
-CPPFLAGS_vmlinux.lds	:= -Upowerpc
-
 BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
 
 PHONY += $(BOOT_TARGETS)
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 467221dd570..dfe272d1446 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -31,7 +31,6 @@ export BITS    := 32
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
 KBUILD_AFLAGS += -m32
-CPPFLAGS_vmlinux.lds += -m32
 
 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000
 #  Since 2.5.40, the first stage is left not btfix-ed.
@@ -45,9 +44,6 @@ else
 
 CHECKFLAGS      += -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64
 
-# Undefine sparc when processing vmlinux.lds - it is used
-# And teach CPP we are doing 64 bit builds (for this case)
-CPPFLAGS_vmlinux.lds += -m64 -Usparc
 LDFLAGS              := -m elf64_sparc
 export BITS          := 64
 
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 247cc620cee..96aad394cd3 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -7,7 +7,11 @@ ccflags-y := -Werror
 
 extra-y     := head_$(BITS).o
 extra-y     += init_task.o
-extra-y     += vmlinux.lds
+
+# Undefine sparc when processing vmlinux.lds - it is used
+# And teach CPP we are doing $(BITS) builds (for this case)
+CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS)
+extra-y              += vmlinux.lds
 
 obj-$(CONFIG_SPARC32)   += entry.o wof.o wuf.o
 obj-$(CONFIG_SPARC32)   += etrap_32.o
diff --git a/arch/um/Makefile b/arch/um/Makefile
index 0728def3223..fc633dbacf8 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -96,11 +96,10 @@ CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,)
 	$(call cc-option, -fno-stack-protector,) \
 	$(call cc-option, -fno-stack-protector-all,)
 
-CONFIG_KERNEL_STACK_ORDER ?= 2
-STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
-
-CPPFLAGS_vmlinux.lds = -U$(SUBARCH) -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \
-	-DELF_FORMAT="$(ELF_FORMAT)" -DKERNEL_STACK_SIZE=$(STACK_SIZE)
+# Options used by linker script
+export LDS_START      := $(START)
+export LDS_ELF_ARCH   := $(ELF_ARCH)
+export LDS_ELF_FORMAT := $(ELF_FORMAT)
 
 # The wrappers will select whether using "malloc" or the kernel allocator.
 LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index 388ec0a3ea9..1119233597a 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -3,6 +3,9 @@
 # Licensed under the GPL
 #
 
+CPPFLAGS_vmlinux.lds := -U$(SUBARCH) -DSTART=$(LDS_START) \
+                        -DELF_ARCH=$(LDS_ELF_ARCH)        \
+                        -DELF_FORMAT=$(LDS_ELF_FORMAT)
 extra-y := vmlinux.lds
 clean-files :=
 
diff --git a/arch/um/kernel/vmlinux.lds.S b/arch/um/kernel/vmlinux.lds.S
index f8aeb448aab..16e49bfa2b4 100644
--- a/arch/um/kernel/vmlinux.lds.S
+++ b/arch/um/kernel/vmlinux.lds.S
@@ -1,3 +1,6 @@
+
+KERNEL_STACK_SIZE = 4096 * (1 << CONFIG_KERNEL_STACK_ORDER);
+
 #ifdef CONFIG_LD_SCRIPT_STATIC
 #include "uml.lds.S"
 #else
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index fe3186de6a3..6f56d95f2c1 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -27,7 +27,8 @@ sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g'	\
 	-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
 
 quiet_cmd__cpp_lds_S = LDS     $@
-      cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
+      cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
+                       | sed $(sed-y) >$@
 
 $(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
 	$(call if_changed_dep,_cpp_lds_S)
-- 
cgit v1.2.3


From edf382bc6d4429d796fc3b26f7a33eaeca9db8ec Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sun, 20 Sep 2009 14:41:40 +0530
Subject: includecheck fix: um, helper.c

fix the following 'make includecheck' warning:

  arch/um/os-Linux/helper.c: linux/limits.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: jdike@addtoit.com
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247064950.4382.45.camel@ht.satnam>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
---
 arch/um/os-Linux/helper.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index 30860b89ec5..b6b1096152a 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -15,7 +15,6 @@
 #include "os.h"
 #include "um_malloc.h"
 #include "user.h"
-#include <linux/limits.h>
 
 struct helper_data {
 	void (*pre_exec)(void*);
-- 
cgit v1.2.3


From 144374dcc3ad0436f0a1bb3095836cf0ec32eebe Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sun, 20 Sep 2009 15:09:26 +0530
Subject: includecheck fix: x86, traps.c

fix the following 'make includecheck' warning:

  arch/x86/kernel/traps.c: asm/traps.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247065094.4382.49.camel@ht.satnam>
---
 arch/x86/kernel/traps.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7dc0de9d1ed..9346e102338 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -65,7 +65,6 @@
 #else
 #include <asm/processor-flags.h>
 #include <asm/setup.h>
-#include <asm/traps.h>
 
 asmlinkage int system_call(void);
 
-- 
cgit v1.2.3


From fcf989216138858003f0c354698260f29e6e10b0 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sun, 20 Sep 2009 15:13:18 +0530
Subject: includecheck fix: x86, shadow.c

fix the following 'make includecheck' warning:

  arch/x86/mm/kmemcheck/shadow.c: linux/module.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247065179.4382.51.camel@ht.satnam>
---
 arch/x86/mm/kmemcheck/shadow.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/kmemcheck/shadow.c b/arch/x86/mm/kmemcheck/shadow.c
index e773b6bd007..3f66b82076a 100644
--- a/arch/x86/mm/kmemcheck/shadow.c
+++ b/arch/x86/mm/kmemcheck/shadow.c
@@ -1,7 +1,6 @@
 #include <linux/kmemcheck.h>
 #include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 5ac7687860dbfd3dd90e09d2c10dd31de91f20c2 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Date: Sun, 20 Sep 2009 16:34:24 +0530
Subject: includecheck fix: x86, cpu/common.c

fix the following 'make includecheck' warning:

  arch/x86/kernel/cpu/common.c: linux/smp.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1252087783.6385.10.camel@ht.satnam>
---
 arch/x86/kernel/cpu/common.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 2055fc2b2e6..2fea97eccf7 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -34,7 +34,6 @@
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/pat.h>
-#include <linux/smp.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
-- 
cgit v1.2.3


From 4275c13ca8859af8a1390856c82173bcdfc32938 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Sat, 19 Sep 2009 05:58:54 +0100
Subject: ARM: 5712/1: SA1100: initialise spinlock in DMA code

Declare it using DEFINE_SPINLOCK()

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 95f9c5a6d6d..cb4521a6f42 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -39,7 +39,7 @@ typedef struct {
 
 static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
 
-static spinlock_t dma_list_lock;
+static DEFINE_SPINLOCK(dma_list_lock);
 
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-- 
cgit v1.2.3


From c88d6aa71bd2ad7b4da2f281bd64ada65d533d83 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:41:58 +0100
Subject: ARM: Provide definitions and helpers for decoding the FSR register

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index cc8829d7e11..1bb38712c86 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -25,6 +25,18 @@
 
 #include "fault.h"
 
+/*
+ * Fault status register encodings
+ */
+#define FSR_WRITE		(1 << 11)
+#define FSR_FS4			(1 << 10)
+#define FSR_FS3_0		(15)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+
 #ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
@@ -201,7 +213,7 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	 * memory access, so we can handle it.
 	 */
 good_area:
-	if (fsr & (1 << 11)) /* write? */
+	if (fsr & FSR_WRITE)
 		mask = VM_WRITE;
 	else
 		mask = VM_READ|VM_EXEC|VM_WRITE;
@@ -216,7 +228,7 @@ good_area:
 	 * than endlessly redo the fault.
 	 */
 survive:
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -489,7 +501,7 @@ hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *)
 asmlinkage void __exception
 do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
 	struct siginfo info;
 
 	if (!inf->fn(addr, fsr, regs))
-- 
cgit v1.2.3


From b42c6344b091db680fd1ec7a0483e8b6796f802b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:47:40 +0100
Subject: ARM: Update page fault handling for new OOM techniques

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 47 ++++++++++++++---------------------------------
 1 file changed, 14 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 1bb38712c86..501304f7e30 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -223,37 +223,18 @@ good_area:
 		goto out;
 
 	/*
-	 * If for any reason at all we couldn't handle
-	 * the fault, make sure we exit gracefully rather
-	 * than endlessly redo the fault.
+	 * If for any reason at all we couldn't handle the fault, make
+	 * sure we exit gracefully rather than endlessly redo the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			return fault;
-		BUG();
-	}
+	if (unlikely(fault & VM_FAULT_ERROR))
+		return fault;
 	if (fault & VM_FAULT_MAJOR)
 		tsk->maj_flt++;
 	else
 		tsk->min_flt++;
 	return fault;
 
-out_of_memory:
-	if (!is_global_init(tsk))
-		goto out;
-
-	/*
-	 * If we are out of memory for pid1, sleep for a while and retry
-	 */
-	up_read(&mm->mmap_sem);
-	yield();
-	down_read(&mm->mmap_sem);
-	goto survive;
-
 check_stack:
 	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
 		goto good_area;
@@ -301,6 +282,16 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, call the OOM killer, and return to
+		 * userspace (which will retry the fault, or kill us if we
+		 * got oom-killed)
+		 */
+		pagefault_out_of_memory();
+		return 0;
+	}
+
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
@@ -308,16 +299,6 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	if (!user_mode(regs))
 		goto no_context;
 
-	if (fault & VM_FAULT_OOM) {
-		/*
-		 * We ran out of memory, or some other thing
-		 * happened to us that made us unable to handle
-		 * the page fault gracefully.
-		 */
-		printk("VM: killing process %s\n", tsk->comm);
-		do_group_exit(SIGKILL);
-		return 0;
-	}
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to
-- 
cgit v1.2.3


From bf4569922b97824f33e5d08d0bbe4b34fe43e4cd Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:52:19 +0100
Subject: ARM: Ensure correct might_sleep() check in pagefault path

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 501304f7e30..b8b3bb4423c 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -271,6 +271,13 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
 			goto no_context;
 		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in
+		 * which case, we'll have missed the might_sleep() from
+		 * down_read()
+		 */
+		might_sleep();
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);
-- 
cgit v1.2.3


From 63234717d170d39ee9cc873f29930b0fb142a114 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@unipv.it>
Date: Wed, 29 Jul 2009 18:51:56 +0200
Subject: mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/configs/nhk8815_defconfig        |  2 +-
 arch/arm/mach-nomadik/board-nhk8815.c     | 92 +++++++++++++++++++++++++++++++
 arch/arm/mach-nomadik/include/mach/fsmc.h | 29 ++++++++++
 arch/arm/mach-nomadik/include/mach/nand.h | 16 ++++++
 4 files changed, 138 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-nomadik/include/mach/fsmc.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/nand.h

(limited to 'arch')

diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 9bb45b932f0..600cb270f2b 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -498,7 +498,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_ECC_SMC=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 79bdea943eb..59c1dbb686c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -16,12 +16,103 @@
 #include <linux/amba/bus.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <mach/setup.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
 #include "clock.h"
 
+/* These adresses span 16MB, so use three individual pages */
+static struct resource nhk8815_nand_resources[] = {
+	{
+		.name = "nand_addr",
+		.start = NAND_IO_ADDR,
+		.end = NAND_IO_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_cmd",
+		.start = NAND_IO_CMD,
+		.end = NAND_IO_CMD + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_data",
+		.start = NAND_IO_DATA,
+		.end = NAND_IO_DATA + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static int nhk8815_nand_init(void)
+{
+	/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
+	writel(0x0000000E, FSMC_PCR(0));
+	writel(0x000D0A00, FSMC_PMEM(0));
+	writel(0x00100A00, FSMC_PATT(0));
+
+	/* enable access to the chip select area */
+	writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
+
+	return 0;
+}
+
+/*
+ * These partitions are the same as those used in the 2.6.20 release
+ * shipped by the vendor; the first two partitions are mandated
+ * by the boot ROM, and the bootloader area is somehow oversized...
+ */
+static struct mtd_partition nhk8815_partitions[] = {
+	{
+		.name	= "X-Loader(NAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M,
+	}, {
+		.name	= "Kernel zImage(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 3 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct nomadik_nand_platform_data nhk8815_nand_data = {
+	.parts		= nhk8815_partitions,
+	.nparts		= ARRAY_SIZE(nhk8815_partitions),
+	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
+			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
+	.init		= nhk8815_nand_init,
+};
+
+static struct platform_device nhk8815_nand_device = {
+	.name		= "nomadik_nand",
+	.dev		= {
+		.platform_data = &nhk8815_nand_data,
+	},
+	.resource	= nhk8815_nand_resources,
+	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
+};
+
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -81,6 +172,7 @@ static int __init nhk8815_eth_init(void)
 device_initcall(nhk8815_eth_init);
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	&nhk8815_nand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };
diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h
new file mode 100644
index 00000000000..8c2c0518368
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/fsmc.h
@@ -0,0 +1,29 @@
+
+/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
+
+#ifndef __ASM_ARCH_FSMC_H
+#define __ASM_ARCH_FSMC_H
+
+#include <mach/hardware.h>
+/*
+ * Register list
+ */
+
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x)     (NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x)     (NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
+/* PC-card and NAND:
+ * PCR = control register
+ * PMEM = memory timing
+ * PATT = attribute timing
+ * PIO = I/O timing
+ * PECCR = ECC result
+ */
+#define FSMC_PCR(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
+#define FSMC_PMEM(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
+#define FSMC_PATT(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
+#define FSMC_PIO(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
+#define FSMC_PECCR(x)   (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
+
+#endif /* __ASM_ARCH_FSMC_H */
diff --git a/arch/arm/mach-nomadik/include/mach/nand.h b/arch/arm/mach-nomadik/include/mach/nand.h
new file mode 100644
index 00000000000..c3c8254c22a
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/nand.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+	struct mtd_partition *parts;
+	int nparts;
+	int options;
+	int (*init) (void);
+	int (*exit) (void);
+};
+
+#define NAND_IO_DATA	0x40000000
+#define NAND_IO_CMD	0x40800000
+#define NAND_IO_ADDR	0x41000000
+
+#endif				/* __ASM_ARCH_NAND_H */
-- 
cgit v1.2.3


From 8b85e7cbcfedfcdc2fa1bcc8945f23fc6ad3d07f Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@unipv.it>
Date: Fri, 24 Jul 2009 13:30:04 +0200
Subject: mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/arm/mach-nomadik/board-nhk8815.c | 63 +++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 59c1dbb686c..6bfd537d5af 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -24,6 +24,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
@@ -112,6 +113,66 @@ static struct platform_device nhk8815_nand_device = {
 	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
 };
 
+/* These are the partitions for the OneNand device, different from above */
+static struct mtd_partition nhk8815_onenand_partitions[] = {
+	{
+		.name	= "X-Loader(OneNAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M-SZ_256K,
+	}, {
+		.name	= "SysImage(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct flash_platform_data nhk8815_onenand_data = {
+	.parts		= nhk8815_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
+};
+
+static struct resource nhk8815_onenand_resource[] = {
+	{
+		.start		= 0x30000000,
+		.end		= 0x30000000 + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nhk8815_onenand_device = {
+	.name		= "onenand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &nhk8815_onenand_data,
+	},
+	.resource	= nhk8815_onenand_resource,
+	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
+};
+
+static void __init nhk8815_onenand_init(void)
+{
+#ifdef CONFIG_ONENAND
+       /* Set up SMCS0 for OneNand */
+       writel(0x000030db, FSMC_BCR0);
+       writel(0x02100551, FSMC_BTR0);
+#endif
+}
 
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -173,6 +234,7 @@ device_initcall(nhk8815_eth_init);
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
 	&nhk8815_nand_device,
+	&nhk8815_onenand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };
@@ -182,6 +244,7 @@ static void __init nhk8815_platform_init(void)
 	int i;
 
 	cpu8815_platform_init();
+	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 
-- 
cgit v1.2.3


From d374bf14a5ff18133bd6a6cc00f189949f7ba8fb Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 12:53:01 +0100
Subject: ARM: Separate out access error checking

Since we get notified separately about prefetch aborts, which may be
permission faults, we need to check for appropriate access permissions
when handling a fault.  This patch prepares us for doing this by
separating out the access error checking.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index b8b3bb4423c..b7ce07d416c 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -194,18 +194,33 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
-static int
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+	if (fsr & FSR_WRITE)
+		mask = VM_WRITE;
+
+	return vma->vm_flags & mask ? false : true;
+}
+
+static int __kprobes
 __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 		struct task_struct *tsk)
 {
 	struct vm_area_struct *vma;
-	int fault, mask;
+	int fault;
 
 	vma = find_vma(mm, addr);
 	fault = VM_FAULT_BADMAP;
-	if (!vma)
+	if (unlikely(!vma))
 		goto out;
-	if (vma->vm_start > addr)
+	if (unlikely(vma->vm_start > addr))
 		goto check_stack;
 
 	/*
@@ -213,14 +228,10 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	 * memory access, so we can handle it.
 	 */
 good_area:
-	if (fsr & FSR_WRITE)
-		mask = VM_WRITE;
-	else
-		mask = VM_READ|VM_EXEC|VM_WRITE;
-
-	fault = VM_FAULT_BADACCESS;
-	if (!(vma->vm_flags & mask))
+	if (access_error(fsr, vma)) {
+		fault = VM_FAULT_BADACCESS;
 		goto out;
+	}
 
 	/*
 	 * If for any reason at all we couldn't handle the fault, make
-- 
cgit v1.2.3


From df297bf6c7933e7b021cdc1bf3f9e319ea3a7e9c Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 20 Sep 2009 13:18:47 +0100
Subject: ARM: Add support for checking access permissions on prefetch aborts

ARMv6 introduces non-executable mappings, which can cause prefetch aborts
when an attempt is made to execute from such a mapping.  Currently, this
causes us to loop in the page fault handler since we don't correctly
check for proper permissions.

Fix this by checking that VMAs have VM_EXEC set for prefetch aborts.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index b7ce07d416c..379f7855605 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -26,8 +26,9 @@
 #include "fault.h"
 
 /*
- * Fault status register encodings
+ * Fault status register encodings.  We steal bit 31 for our own purposes.
  */
+#define FSR_LNX_PF		(1 << 31)
 #define FSR_WRITE		(1 << 11)
 #define FSR_FS4			(1 << 10)
 #define FSR_FS3_0		(15)
@@ -205,6 +206,8 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 
 	if (fsr & FSR_WRITE)
 		mask = VM_WRITE;
+	if (fsr & FSR_LNX_PF)
+		mask = VM_EXEC;
 
 	return vma->vm_flags & mask ? false : true;
 }
@@ -503,7 +506,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
 	struct siginfo info;
 
-	if (!inf->fn(addr, fsr, regs))
+	if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
 		return;
 
 	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
@@ -519,6 +522,6 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 asmlinkage void __exception
 do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
 {
-	do_translation_fault(addr, 0, regs);
+	do_translation_fault(addr, FSR_LNX_PF, regs);
 }
 
-- 
cgit v1.2.3


From a1792cdacaf5180e04e07811e220c4a3b4a9c33e Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 9 Sep 2009 10:04:47 +0200
Subject: perf_counter: x86: Fix PMU resource leak

Dave noticed that we leak the PMU resource reservations when we
fail the hardware counter init.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
LKML-Reference: <1252483487.7746.164.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index dbdf712fae9..a6c8b27553c 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -924,6 +924,8 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	if (err)
 		return err;
 
+	counter->destroy = hw_perf_counter_destroy;
+
 	/*
 	 * Generate PMC IRQs:
 	 * (keep 'enabled' bit clear for now)
@@ -953,8 +955,6 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 			return -EOPNOTSUPP;
 	}
 
-	counter->destroy = hw_perf_counter_destroy;
-
 	/*
 	 * Raw event type provide the config in the event structure
 	 */
@@ -2107,8 +2107,11 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
 	int err;
 
 	err = __hw_perf_counter_init(counter);
-	if (err)
+	if (err) {
+		if (counter->destroy)
+			counter->destroy(counter);
 		return ERR_PTR(err);
+	}
 
 	return &pmu;
 }
-- 
cgit v1.2.3


From 9ff6d8e06fbd9249804d43574167c2acc52886be Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Mon, 14 Sep 2009 09:28:07 -0700
Subject: x86, mtrr: Convert loop to a while based construct, avoid naked
 semicolon

Perhaps this is a more readable/standard form.

Signed-off-by: Joe Perches <joe@perches.com>
LKML-Reference: <1252945687.3937.14.camel@Joe-Laptop.home>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/if.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index 08b6ea4c62b..f04e7252760 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -126,8 +126,8 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 		return -EINVAL;
 
 	base = simple_strtoull(line + 5, &ptr, 0);
-	for (; isspace(*ptr); ++ptr)
-		;
+	while (isspace(*ptr))
+		ptr++;
 
 	if (strncmp(ptr, "size=", 5))
 		return -EINVAL;
@@ -135,14 +135,14 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 	size = simple_strtoull(ptr + 5, &ptr, 0);
 	if ((base & 0xfff) || (size & 0xfff))
 		return -EINVAL;
-	for (; isspace(*ptr); ++ptr)
-		;
+	while (isspace(*ptr))
+		ptr++;
 
 	if (strncmp(ptr, "type=", 5))
 		return -EINVAL;
 	ptr += 5;
-	for (; isspace(*ptr); ++ptr)
-		;
+	while (isspace(*ptr))
+		ptr++;
 
 	for (i = 0; i < MTRR_NUM_TYPES; ++i) {
 		if (strcmp(ptr, mtrr_strings[i]))
-- 
cgit v1.2.3


From efc8f7419ea0a97c38d0b80785c8c3d9ab8a4872 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 18 Sep 2009 06:39:15 +0800
Subject: x86/i386: Remove duplicated #include

Remove duplicated #include in:

  arch/x86/kernel/cpu/common.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 2055fc2b2e6..2fea97eccf7 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -34,7 +34,6 @@
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/pat.h>
-#include <linux/smp.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
-- 
cgit v1.2.3


From 8312136fa8b0a3ec7323bbb1a46be8c0c26e994e Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Tue, 15 Sep 2009 11:12:30 +0400
Subject: x86, apic: Fix missed handling of discrete apics

In case of discrete (pretty old) apics we may have cpu_has_apic bit
not set but have to check if smp_found_config (MP spec) is there
and apic was not disabled.

Also don't forget to print apic/io-apic for such case as well.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090915071230.GA10604@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h    | 13 +++++++++++++
 arch/x86/kernel/apic/apic.c    |  2 +-
 arch/x86/kernel/apic/io_apic.c |  4 ++--
 3 files changed, 16 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 586b7adb8e5..9a86fb40490 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -65,6 +65,19 @@ static inline void default_inquire_remote_apic(int apicid)
 		__inquire_remote_apic(apicid);
 }
 
+/*
+ * With 82489DX we can't rely on apic feature bit
+ * retrieved via cpuid but still have to deal with
+ * such an apic chip so we assume that SMP configuration
+ * is found from MP table (64bit case uses ACPI mostly
+ * which set smp presence flag as well so we are safe
+ * to use this helper too).
+ */
+static inline bool apic_from_smp_config(void)
+{
+	return smp_found_config && !disable_apic;
+}
+
 /*
  * Basic functions accessing APICs.
  */
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 072aea6c630..2d59dfa2978 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -978,7 +978,7 @@ void lapic_shutdown(void)
 {
 	unsigned long flags;
 
-	if (!cpu_has_apic)
+	if (!cpu_has_apic && !apic_from_smp_config())
 		return;
 
 	local_irq_save(flags);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 3c8f9e75d03..593c4f8a8bb 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1863,7 +1863,7 @@ __apicdebuginit(int) print_all_ICs(void)
 	print_PIC();
 
 	/* don't print out if apic is not there */
-	if (!cpu_has_apic || disable_apic)
+	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
 	print_all_local_APICs();
@@ -1981,7 +1981,7 @@ void disable_IO_APIC(void)
 	/*
 	 * Use virtual wire A mode when interrupt remapping is enabled.
 	 */
-	if (cpu_has_apic)
+	if (cpu_has_apic || apic_from_smp_config())
 		disconnect_bsp_APIC(!intr_remapping_enabled &&
 				ioapic_i8259.pin != -1);
 }
-- 
cgit v1.2.3


From 878f4f533e5b4498215e67e0f886b0fc81417f5e Mon Sep 17 00:00:00 2001
From: Felipe Contreras <felipe.contreras@gmail.com>
Date: Thu, 17 Sep 2009 00:38:38 +0300
Subject: x86: Trivial whitespace cleanups

Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alok N Kataria <akataria@vmware.com>
Cc: "Tan Wei Chong" <wei.chong.tan@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
LKML-Reference: <1253137123-18047-2-git-send-email-felipe.contreras@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/string_32.h | 1 -
 arch/x86/kernel/tsc.c            | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
index c86f452256d..ae907e61718 100644
--- a/arch/x86/include/asm/string_32.h
+++ b/arch/x86/include/asm/string_32.h
@@ -65,7 +65,6 @@ static __always_inline void *__constant_memcpy(void *to, const void *from,
 	case 4:
 		*(int *)to = *(int *)from;
 		return to;
-
 	case 3:
 		*(short *)to = *(short *)from;
 		*((char *)to + 2) = *((char *)from + 2);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 71f4368b357..8a2fc112369 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -670,7 +670,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	if ((val == CPUFREQ_PRECHANGE  && freq->old < freq->new) ||
 			(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
 			(val == CPUFREQ_RESUMECHANGE)) {
-		*lpj = 	cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+		*lpj = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
 
 		tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
 		if (!(freq->flags & CPUFREQ_CONST_LOOPS))
-- 
cgit v1.2.3


From 4fe487828b912ca004b4f4505275ab164ed6ce9f Mon Sep 17 00:00:00 2001
From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Date: Thu, 17 Sep 2009 15:54:01 +0300
Subject: x86: Fix uaccess_32.h typo

Trivial: correct "that the we don't" typo.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
LKML-Reference: <20090917125401.GU3717@localdomain.by>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/uaccess_32.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 5e06259e90e..632fb44b4cb 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -33,7 +33,7 @@ unsigned long __must_check __copy_from_user_ll_nocache_nozero
  * Copy data from kernel space to user space.  Caller must check
  * the specified block with access_ok() before calling this function.
  * The caller should also make sure he pins the user space address
- * so that the we don't result in page fault and sleep.
+ * so that we don't result in page fault and sleep.
  *
  * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
  * we return the initial request size (1, 2 or 4), as copy_*_user should do.
-- 
cgit v1.2.3


From 414128bd33fef3242747154dfa444970bc5caf4c Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Fri, 4 Sep 2009 09:13:49 +0100
Subject: x86: Increase timeout for EHCI debug port reset completion in early
 printk

On one of my systems, several thousand iterations are needed before
CMD_RESET can be observed clear after setting it. Using a much
higher value here obviously cannot hurt.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <4AA0E85D02000078000136F9@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/early_printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 335f049d110..b11cab3c323 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -624,7 +624,7 @@ try_next_port:
 		return -1;
 	}
 
-	loop = 10;
+	loop = 100000;
 	/* Reset the EHCI controller */
 	cmd = readl(&ehci_regs->command);
 	cmd |= CMD_RESET;
-- 
cgit v1.2.3


From 5f68563996e812f9ca35b3939ad2a42e5d254d66 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Fri, 4 Sep 2009 09:16:22 +0100
Subject: x86: cpuinit-annotate SMP boot trampolines properly

Add missing annotations, and make use of include/linux/init.h's
macros.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4AA0E8F60200007800013703@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/trampoline.c    | 4 ++--
 arch/x86/kernel/trampoline_32.S | 8 ++------
 arch/x86/kernel/trampoline_64.S | 5 +++--
 3 files changed, 7 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index 808031a5ba1..699f7eeb896 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -4,7 +4,7 @@
 #include <asm/e820.h>
 
 /* ready for x86_64 and x86 */
-unsigned char *trampoline_base = __va(TRAMPOLINE_BASE);
+unsigned char *__cpuinitdata trampoline_base = __va(TRAMPOLINE_BASE);
 
 void __init reserve_trampoline_memory(void)
 {
@@ -26,7 +26,7 @@ void __init reserve_trampoline_memory(void)
  * bootstrap into the page concerned. The caller
  * has made sure it's suitably aligned.
  */
-unsigned long setup_trampoline(void)
+unsigned long __cpuinit setup_trampoline(void)
 {
 	memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE);
 	return virt_to_phys(trampoline_base);
diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S
index 66d874e5404..8508237e8e4 100644
--- a/arch/x86/kernel/trampoline_32.S
+++ b/arch/x86/kernel/trampoline_32.S
@@ -28,16 +28,12 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
 
 /* We can free up trampoline after bootup if cpu hotplug is not supported. */
-#ifndef CONFIG_HOTPLUG_CPU
-.section ".cpuinit.data","aw",@progbits
-#else
-.section .rodata,"a",@progbits
-#endif
-
+__CPUINITRODATA
 .code16
 
 ENTRY(trampoline_data)
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index cddfb8d386b..596d54c660a 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -25,14 +25,15 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/pgtable_types.h>
 #include <asm/page_types.h>
 #include <asm/msr.h>
 #include <asm/segment.h>
 #include <asm/processor-flags.h>
 
-.section .rodata, "a", @progbits
-
+/* We can free up the trampoline after bootup if cpu hotplug is not supported. */
+__CPUINITRODATA
 .code16
 
 ENTRY(trampoline_data)
-- 
cgit v1.2.3


From 8d0cc631f6dd0a9283ceb7d61d8b85ecbcd355ea Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Fri, 4 Sep 2009 09:18:07 +0100
Subject: x86: Correct segment permission flags in 64-bit linker script

While these don't get actively used (afaict), it still doesn't hurt
for them to properly reflect what how respective segments will get
mapped/ accessed.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4AA0E95F0200007800013707@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/vmlinux.lds.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 0ccb57d5ee3..a46acccec38 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -45,9 +45,9 @@ PHDRS {
 	text PT_LOAD FLAGS(5);          /* R_E */
 	data PT_LOAD FLAGS(7);          /* RWE */
 #ifdef CONFIG_X86_64
-	user PT_LOAD FLAGS(7);          /* RWE */
+	user PT_LOAD FLAGS(5);          /* R_E */
 #ifdef CONFIG_SMP
-	percpu PT_LOAD FLAGS(7);        /* RWE */
+	percpu PT_LOAD FLAGS(6);        /* RW_ */
 #endif
 	init PT_LOAD FLAGS(7);          /* RWE */
 #endif
-- 
cgit v1.2.3


From 6399c087458859cddff2d6b46befb95b866df3e0 Mon Sep 17 00:00:00 2001
From: Alok Kataria <akataria@vmware.com>
Date: Fri, 4 Sep 2009 13:13:39 -0700
Subject: x86: Print the hypervisor returned tsc_khz during boot

On an AMD-64 system the processor frequency that is printed during
system boot, may be different than the tsc frequency that was
returned by the hypervisor, due to the value returned from
calibrate_cpu.

For debugging timekeeping or other related issues it might be
better to get the tsc_khz value returned by the hypervisor.

The patch below now prints the tsc frequency that the VMware
hypervisor returned.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <1252095219.12518.13.camel@ank32.eng.vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/vmware.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 0a46b4df5d8..1cbed97b59c 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -58,6 +58,9 @@ static unsigned long vmware_get_tsc_khz(void)
 	tsc_hz = eax | (((uint64_t)ebx) << 32);
 	do_div(tsc_hz, 1000);
 	BUG_ON(tsc_hz >> 32);
+	printk(KERN_INFO "TSC freq read from hypervisor : %lu.%03lu MHz\n",
+			 (unsigned long) tsc_hz / 1000,
+			 (unsigned long) tsc_hz % 1000);
 	return tsc_hz;
 }
 
@@ -69,6 +72,9 @@ void __init vmware_platform_setup(void)
 
 	if (ebx != UINT_MAX)
 		x86_platform.calibrate_tsc = vmware_get_tsc_khz;
+	else
+		printk(KERN_WARNING
+		       "Failed to get TSC freq from the hypervisor\n");
 }
 
 /*
-- 
cgit v1.2.3


From dcbb5593d980bbf4ceef320f8c75210398ed84db Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 20 Sep 2009 15:57:28 -0700
Subject: loongson: fix cut-and-paste mis-merge

Ingo points out that I screwed up when merging the 'timers-for-linus'
branch in commit a03fdb7612874834d6847107198712d18b5242c7.

A bit too much copy-and-pasting caused the end result to have an
extraneous 'return' in the middle of an expression.  That was obviously
bogus.  Blush.

Reported-by-with-patch: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mips/loongson/common/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c
index 0edbef32b86..6e08c8270ab 100644
--- a/arch/mips/loongson/common/time.c
+++ b/arch/mips/loongson/common/time.c
@@ -23,6 +23,6 @@ void __init plat_time_init(void)
 
 void read_persistent_clock(struct timespec *ts)
 {
-	ts->tv_sec = return mc146818_get_cmos_time();
+	ts->tv_sec = mc146818_get_cmos_time();
 	ts->tv_nsec = 0;
 }
-- 
cgit v1.2.3


From d200c922bc2b1ac88b8d33b6cfff2ed837af186a Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sun, 20 Sep 2009 18:14:13 -0400
Subject: Use new __init_task_data macro in arch init_task.c files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/kernel/init_task.c            | 5 ++---
 arch/avr32/kernel/init_task.c          | 5 ++---
 arch/cris/kernel/process.c             | 5 ++---
 arch/frv/kernel/init_task.c            | 5 ++---
 arch/h8300/kernel/init_task.c          | 5 ++---
 arch/ia64/kernel/init_task.c           | 3 ++-
 arch/m32r/kernel/init_task.c           | 5 ++---
 arch/m68k/kernel/process.c             | 6 +++---
 arch/m68knommu/kernel/init_task.c      | 5 ++---
 arch/microblaze/kernel/init_task.c     | 5 ++---
 arch/mips/kernel/init_task.c           | 5 ++---
 arch/mn10300/kernel/init_task.c        | 5 ++---
 arch/parisc/kernel/init_task.c         | 4 ++--
 arch/powerpc/kernel/init_task.c        | 5 ++---
 arch/powerpc/kernel/machine_kexec_64.c | 5 +++--
 arch/s390/kernel/init_task.c           | 5 ++---
 arch/score/kernel/init_task.c          | 5 ++---
 arch/sh/kernel/init_task.c             | 5 ++---
 arch/sparc/kernel/init_task.c          | 5 ++---
 arch/um/kernel/init_task.c             | 5 ++---
 arch/x86/kernel/init_task.c            | 5 ++---
 arch/xtensa/kernel/init_task.c         | 5 ++---
 22 files changed, 46 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index 3f470866bb8..e7cbb50dc35 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -24,9 +24,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  *
  * The things we do for performance..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/avr32/kernel/init_task.c b/arch/avr32/kernel/init_task.c
index 57ec9f2dcd9..6b2343e6fe3 100644
--- a/arch/avr32/kernel/init_task.c
+++ b/arch/avr32/kernel/init_task.c
@@ -18,9 +18,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 /*
  * Initial thread structure. Must be aligned on an 8192-byte boundary.
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index 51dcd04d277..c99aeab7cef 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -45,9 +45,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/frv/kernel/init_task.c b/arch/frv/kernel/init_task.c
index 1d3df1d9495..3c3e0b336a9 100644
--- a/arch/frv/kernel/init_task.c
+++ b/arch/frv/kernel/init_task.c
@@ -19,9 +19,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/h8300/kernel/init_task.c b/arch/h8300/kernel/init_task.c
index 089c65ed6eb..54c1062ee80 100644
--- a/arch/h8300/kernel/init_task.c
+++ b/arch/h8300/kernel/init_task.c
@@ -31,7 +31,6 @@ EXPORT_SYMBOL(init_task);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
diff --git a/arch/ia64/kernel/init_task.c b/arch/ia64/kernel/init_task.c
index c475fc281be..e253ab8fcbc 100644
--- a/arch/ia64/kernel/init_task.c
+++ b/arch/ia64/kernel/init_task.c
@@ -33,7 +33,8 @@ union {
 		struct thread_info thread_info;
 	} s;
 	unsigned long stack[KERNEL_STACK_SIZE/sizeof (unsigned long)];
-} init_task_mem asm ("init_task") __attribute__((section(".data.init_task"))) = {{
+} init_task_mem asm ("init_task") __init_task_data =
+	{{
 	.task =		INIT_TASK(init_task_mem.s.task),
 	.thread_info =	INIT_THREAD_INFO(init_task_mem.s.task)
 }};
diff --git a/arch/m32r/kernel/init_task.c b/arch/m32r/kernel/init_task.c
index fce57e5d3f9..6c42d5f8df5 100644
--- a/arch/m32r/kernel/init_task.c
+++ b/arch/m32r/kernel/init_task.c
@@ -20,9 +20,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 72bad65dba3..41230c595a8 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -42,9 +42,9 @@
  */
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
-__attribute__((section(".data.init_task"), aligned(THREAD_SIZE)))
-       = { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data
+	__attribute__((aligned(THREAD_SIZE))) =
+		{ INIT_THREAD_INFO(init_task) };
 
 /* initial task structure */
 struct task_struct init_task = INIT_TASK(init_task);
diff --git a/arch/m68knommu/kernel/init_task.c b/arch/m68knommu/kernel/init_task.c
index 45e97a207fe..cbf9dc3cc51 100644
--- a/arch/m68knommu/kernel/init_task.c
+++ b/arch/m68knommu/kernel/init_task.c
@@ -31,7 +31,6 @@ EXPORT_SYMBOL(init_task);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
diff --git a/arch/microblaze/kernel/init_task.c b/arch/microblaze/kernel/init_task.c
index 67da22579b6..b5d711f94ff 100644
--- a/arch/microblaze/kernel/init_task.c
+++ b/arch/microblaze/kernel/init_task.c
@@ -19,9 +19,8 @@
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 struct task_struct init_task = INIT_TASK(init_task);
 EXPORT_SYMBOL(init_task);
diff --git a/arch/mips/kernel/init_task.c b/arch/mips/kernel/init_task.c
index 5b457a40c78..6d6ca530589 100644
--- a/arch/mips/kernel/init_task.c
+++ b/arch/mips/kernel/init_task.c
@@ -21,9 +21,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  *
  * The things we do for performance..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"),
-	               __aligned__(THREAD_SIZE))) =
+union thread_union init_thread_union __init_task_data
+	__attribute__((__aligned__(THREAD_SIZE))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 /*
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
index 80d423b80af..a481b043bea 100644
--- a/arch/mn10300/kernel/init_task.c
+++ b/arch/mn10300/kernel/init_task.c
@@ -27,9 +27,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index 82974b20fc1..d020eae6525 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -43,8 +43,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
+union thread_union init_thread_union __init_task_data
+	__attribute__((aligned(128))) =
 		{ INIT_THREAD_INFO(init_task) };
 
 #if PT_NLEVELS == 3
diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c
index ffc4253fef5..2375b7eb1c7 100644
--- a/arch/powerpc/kernel/init_task.c
+++ b/arch/powerpc/kernel/init_task.c
@@ -16,9 +16,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 49e705fcee6..040bd1de8d9 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -13,6 +13,7 @@
 #include <linux/kexec.h>
 #include <linux/smp.h>
 #include <linux/thread_info.h>
+#include <linux/init_task.h>
 #include <linux/errno.h>
 
 #include <asm/page.h>
@@ -249,8 +250,8 @@ static void kexec_prepare_cpus(void)
  * We could use a smaller stack if we don't care about anything using
  * current, but that audit has not been performed.
  */
-static union thread_union kexec_stack
-	__attribute__((__section__(".data.init_task"))) = { };
+static union thread_union kexec_stack __init_task_data =
+	{ };
 
 /* Our assembly helper, in kexec_stub.S */
 extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c
index fe787f9e5f3..4d1c9fb0b54 100644
--- a/arch/s390/kernel/init_task.c
+++ b/arch/s390/kernel/init_task.c
@@ -25,9 +25,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/score/kernel/init_task.c b/arch/score/kernel/init_task.c
index ff952f6c63f..baa03ee217d 100644
--- a/arch/score/kernel/init_task.c
+++ b/arch/score/kernel/init_task.c
@@ -34,9 +34,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"), __aligned__(THREAD_SIZE))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c
index 1719957c0a6..11f2ea556a6 100644
--- a/arch/sh/kernel/init_task.c
+++ b/arch/sh/kernel/init_task.c
@@ -17,9 +17,8 @@ struct pt_regs fake_swapper_regs;
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c
index 28125c5b3d3..5fe3d65581f 100644
--- a/arch/sparc/kernel/init_task.c
+++ b/arch/sparc/kernel/init_task.c
@@ -18,6 +18,5 @@ EXPORT_SYMBOL(init_task);
  * If this is not aligned on a 8k boundry, then you should change code
  * in etrap.S which assumes it.
  */
-union thread_union init_thread_union
-	__attribute__((section (".data.init_task")))
-	= { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index b25121b537d..8aa77b61a5f 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -30,9 +30,8 @@ EXPORT_SYMBOL(init_task);
  * "init_task" linker map entry..
  */
 
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 union thread_union cpu0_irqstack
 	__attribute__((__section__(".data.init_irqstack"))) =
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index 270ff83efc1..3a54dcb9cd0 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -20,9 +20,8 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
  * way process stacks are handled. This is done by having a special
  * "init_task" linker map entry..
  */
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 /*
  * Initial task structure.
diff --git a/arch/xtensa/kernel/init_task.c b/arch/xtensa/kernel/init_task.c
index c4302f0e4ba..cd122fb7e48 100644
--- a/arch/xtensa/kernel/init_task.c
+++ b/arch/xtensa/kernel/init_task.c
@@ -23,9 +23,8 @@
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
-	__attribute__((__section__(".data.init_task"))) =
-{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
 
 struct task_struct init_task = INIT_TASK(init_task);
 
-- 
cgit v1.2.3


From 02b7da37f7acd49277dea1481dc0c5c246c09732 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Sun, 20 Sep 2009 18:14:14 -0400
Subject: Use macros for .bss.page_aligned section.

This patch changes the remaining direct references to
.bss.page_aligned in C and assembly code to use the macros in
include/linux/linkage.h.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/sh/kernel/irq.c      | 6 ++----
 arch/x86/kernel/head_32.S | 2 +-
 arch/x86/kernel/head_64.S | 2 +-
 arch/xtensa/kernel/head.S | 2 +-
 4 files changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 60f8af4497c..7cb933ba495 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -165,11 +165,9 @@ asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 }
 
 #ifdef CONFIG_IRQSTACKS
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
 
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
 
 /*
  * allocate per-cpu stacks for hardirq and for softirq processing
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index b766e8c7252..1dac2395842 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -608,7 +608,7 @@ ENTRY(initial_code)
 /*
  * BSS section
  */
-.section ".bss.page_aligned","wa"
+__PAGE_ALIGNED_BSS
 	.align PAGE_SIZE_asm
 #ifdef CONFIG_X86_PAE
 swapper_pg_pmd:
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index fa54f78e2a0..d0bc0a13a43 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -418,7 +418,7 @@ ENTRY(phys_base)
 ENTRY(idt_table)
 	.skip IDT_ENTRIES * 16
 
-	.section .bss.page_aligned, "aw", @nobits
+	__PAGE_ALIGNED_BSS
 	.align PAGE_SIZE
 ENTRY(empty_zero_page)
 	.skip PAGE_SIZE
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index d9ddc1ba761..d215adcfd4e 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -235,7 +235,7 @@ should_never_return:
  * BSS section
  */
 	
-.section ".bss.page_aligned", "w"
+__PAGE_ALIGNED_BSS
 #ifdef CONFIG_MMU
 ENTRY(swapper_pg_dir)
 	.fill	PAGE_SIZE, 1, 0
-- 
cgit v1.2.3


From abe1ee3a221d53778c3e58747bbec6e518e5471b Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Sun, 20 Sep 2009 18:14:15 -0400
Subject: Use macros for .data.page_aligned section.

This patch changes the remaining direct references to
.data.page_aligned in C and assembly code to use the macros in
include/linux/linkage.h.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/avr32/mm/init.c                        | 4 +---
 arch/powerpc/kernel/vdso.c                  | 3 ++-
 arch/powerpc/kernel/vdso32/vdso32_wrapper.S | 3 ++-
 arch/powerpc/kernel/vdso64/vdso64_wrapper.S | 3 ++-
 arch/s390/kernel/vdso.c                     | 2 +-
 arch/s390/kernel/vdso32/vdso32_wrapper.S    | 3 ++-
 arch/s390/kernel/vdso64/vdso64_wrapper.S    | 3 ++-
 arch/x86/include/asm/cache.h                | 4 +++-
 arch/x86/kernel/head_32.S                   | 2 +-
 9 files changed, 16 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index e819fa69a90..cc60d10cf8f 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -24,11 +24,9 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
-#define __page_aligned	__attribute__((section(".data.page_aligned")))
-
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_data;
 
 struct page *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index a0abce251d0..3faaf29bdb2 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -1,3 +1,4 @@
+
 /*
  *    Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
  *			 <benh@kernel.crashing.org>
@@ -74,7 +75,7 @@ static int vdso_ready;
 static union {
 	struct vdso_data	data;
 	u8			page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __page_aligned_data;
 struct vdso_data *vdso_data = &vdso_data_store.data;
 
 /* Format of the patch table */
diff --git a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
index 556f0caa5d8..6e8f507ed32 100644
--- a/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
+++ b/arch/powerpc/kernel/vdso32/vdso32_wrapper.S
@@ -1,7 +1,8 @@
 #include <linux/init.h>
+#include <linux/linkage.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	__PAGE_ALIGNED_DATA
 
 	.globl vdso32_start, vdso32_end
 	.balign PAGE_SIZE
diff --git a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
index 0529cb9e3b9..b8553d62b79 100644
--- a/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
+++ b/arch/powerpc/kernel/vdso64/vdso64_wrapper.S
@@ -1,7 +1,8 @@
 #include <linux/init.h>
+#include <linux/linkage.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	__PAGE_ALIGNED_DATA
 
 	.globl vdso64_start, vdso64_end
 	.balign PAGE_SIZE
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 45e1708b70f..45a3e9a7ae2 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -75,7 +75,7 @@ __setup("vdso=", vdso_setup);
 static union {
 	struct vdso_data	data;
 	u8			page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __page_aligned_data;
 struct vdso_data *vdso_data = &vdso_data_store.data;
 
 /*
diff --git a/arch/s390/kernel/vdso32/vdso32_wrapper.S b/arch/s390/kernel/vdso32/vdso32_wrapper.S
index 61639a89e70..ae42f8ce350 100644
--- a/arch/s390/kernel/vdso32/vdso32_wrapper.S
+++ b/arch/s390/kernel/vdso32/vdso32_wrapper.S
@@ -1,7 +1,8 @@
 #include <linux/init.h>
+#include <linux/linkage.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	__PAGE_ALIGNED_DATA
 
 	.globl vdso32_start, vdso32_end
 	.balign PAGE_SIZE
diff --git a/arch/s390/kernel/vdso64/vdso64_wrapper.S b/arch/s390/kernel/vdso64/vdso64_wrapper.S
index d8e2ac14d56..c245842b516 100644
--- a/arch/s390/kernel/vdso64/vdso64_wrapper.S
+++ b/arch/s390/kernel/vdso64/vdso64_wrapper.S
@@ -1,7 +1,8 @@
 #include <linux/init.h>
+#include <linux/linkage.h>
 #include <asm/page.h>
 
-	.section ".data.page_aligned"
+	__PAGE_ALIGNED_DATA
 
 	.globl vdso64_start, vdso64_end
 	.balign PAGE_SIZE
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
index 5d367caa0e3..549860d3be8 100644
--- a/arch/x86/include/asm/cache.h
+++ b/arch/x86/include/asm/cache.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_CACHE_H
 #define _ASM_X86_CACHE_H
 
+#include <linux/linkage.h>
+
 /* L1 cache line size */
 #define L1_CACHE_SHIFT	(CONFIG_X86_L1_CACHE_SHIFT)
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
@@ -13,7 +15,7 @@
 #ifdef CONFIG_SMP
 #define __cacheline_aligned_in_smp					\
 	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))	\
-	__attribute__((__section__(".data.page_aligned")))
+	__page_aligned_data
 #endif
 #endif
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 1dac2395842..218aad7ee76 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -626,7 +626,7 @@ ENTRY(empty_zero_page)
  * This starts the data section.
  */
 #ifdef CONFIG_X86_PAE
-.section ".data.page_aligned","wa"
+__PAGE_ALIGNED_DATA
 	/* Page-aligned for the benefit of paravirt? */
 	.align PAGE_SIZE_asm
 ENTRY(swapper_pg_dir)
-- 
cgit v1.2.3


From cd74c86bdf705f824d494a2bbda393d1d562b40a Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 21 Sep 2009 16:44:32 +1000
Subject: perf_counter, powerpc, sparc: Fix compilation after
 perf_counter_overflow() change

Commit 5622f295 ("x86, perf_counter, bts: Optimize BTS overflow
handling") removed the regs field from struct perf_sample_data and
added a regs parameter to perf_counter_overflow().  This breaks the
build on powerpc (and Sparc) as reported by Sachin Sant:

  arch/powerpc/kernel/perf_counter.c: In function 'record_and_restart':
  arch/powerpc/kernel/perf_counter.c:1165: error: unknown field 'regs' specified in initializer

This adjusts arch/powerpc/kernel/perf_counter.c to correspond with the
new struct perf_sample_data and perf_counter_overflow().

[ v2: also fix Sparc, Markus Metzger <markus.t.metzger@intel.com> ]

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: benh@kernel.crashing.org
Cc: linuxppc-dev@ozlabs.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19127.8400.376239.586120@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/kernel/perf_counter.c | 3 +--
 arch/sparc/kernel/perf_counter.c   | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 7ceefaf3a7f..5ccf9bca96c 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -1162,7 +1162,6 @@ static void record_and_restart(struct perf_counter *counter, unsigned long val,
 	 */
 	if (record) {
 		struct perf_sample_data data = {
-			.regs	= regs,
 			.addr	= 0,
 			.period	= counter->hw.last_period,
 		};
@@ -1170,7 +1169,7 @@ static void record_and_restart(struct perf_counter *counter, unsigned long val,
 		if (counter->attr.sample_type & PERF_SAMPLE_ADDR)
 			perf_get_data_addr(regs, &data.addr);
 
-		if (perf_counter_overflow(counter, nmi, &data)) {
+		if (perf_counter_overflow(counter, nmi, &data, regs)) {
 			/*
 			 * Interrupts are coming too fast - throttle them
 			 * by setting the counter to 0, so it will be
diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index 09de4035eaa..b1265ce8a05 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -493,7 +493,6 @@ static int __kprobes perf_counter_nmi_handler(struct notifier_block *self,
 
 	regs = args->regs;
 
-	data.regs = regs;
 	data.addr = 0;
 
 	cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -513,7 +512,7 @@ static int __kprobes perf_counter_nmi_handler(struct notifier_block *self,
 		if (!sparc_perf_counter_set_period(counter, hwc, idx))
 			continue;
 
-		if (perf_counter_overflow(counter, 1, &data))
+		if (perf_counter_overflow(counter, 1, &data, regs))
 			sparc_pmu_disable_counter(hwc, idx);
 	}
 
-- 
cgit v1.2.3


From dfc65094d0313cc48969fa60bcf33d693aeb05a7 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 21 Sep 2009 11:31:35 +0200
Subject: perf_counter: Rename 'event' to event_id/hw_event

In preparation to the renames, to avoid a namespace clash.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 48 +++++++++++++++++++-------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index a6c8b27553c..b1f115696c8 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -124,9 +124,9 @@ static const u64 p6_perfmon_event_map[] =
   [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
 };
 
-static u64 p6_pmu_event_map(int event)
+static u64 p6_pmu_event_map(int hw_event)
 {
-	return p6_perfmon_event_map[event];
+	return p6_perfmon_event_map[hw_event];
 }
 
 /*
@@ -137,7 +137,7 @@ static u64 p6_pmu_event_map(int event)
  */
 #define P6_NOP_COUNTER			0x0000002EULL
 
-static u64 p6_pmu_raw_event(u64 event)
+static u64 p6_pmu_raw_event(u64 hw_event)
 {
 #define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
 #define P6_EVNTSEL_UNIT_MASK		0x0000FF00ULL
@@ -152,7 +152,7 @@ static u64 p6_pmu_raw_event(u64 event)
 	 P6_EVNTSEL_INV_MASK   |	\
 	 P6_EVNTSEL_COUNTER_MASK)
 
-	return event & P6_EVNTSEL_MASK;
+	return hw_event & P6_EVNTSEL_MASK;
 }
 
 
@@ -170,16 +170,16 @@ static const u64 intel_perfmon_event_map[] =
   [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
 };
 
-static u64 intel_pmu_event_map(int event)
+static u64 intel_pmu_event_map(int hw_event)
 {
-	return intel_perfmon_event_map[event];
+	return intel_perfmon_event_map[hw_event];
 }
 
 /*
- * Generalized hw caching related event table, filled
+ * Generalized hw caching related hw_event table, filled
  * in on a per model basis. A value of 0 means
- * 'not supported', -1 means 'event makes no sense on
- * this CPU', any other value means the raw event
+ * 'not supported', -1 means 'hw_event makes no sense on
+ * this CPU', any other value means the raw hw_event
  * ID.
  */
 
@@ -463,7 +463,7 @@ static const u64 atom_hw_cache_event_ids
  },
 };
 
-static u64 intel_pmu_raw_event(u64 event)
+static u64 intel_pmu_raw_event(u64 hw_event)
 {
 #define CORE_EVNTSEL_EVENT_MASK		0x000000FFULL
 #define CORE_EVNTSEL_UNIT_MASK		0x0000FF00ULL
@@ -478,7 +478,7 @@ static u64 intel_pmu_raw_event(u64 event)
 	 CORE_EVNTSEL_INV_MASK  |	\
 	 CORE_EVNTSEL_COUNTER_MASK)
 
-	return event & CORE_EVNTSEL_MASK;
+	return hw_event & CORE_EVNTSEL_MASK;
 }
 
 static const u64 amd_hw_cache_event_ids
@@ -585,12 +585,12 @@ static const u64 amd_perfmon_event_map[] =
   [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
 };
 
-static u64 amd_pmu_event_map(int event)
+static u64 amd_pmu_event_map(int hw_event)
 {
-	return amd_perfmon_event_map[event];
+	return amd_perfmon_event_map[hw_event];
 }
 
-static u64 amd_pmu_raw_event(u64 event)
+static u64 amd_pmu_raw_event(u64 hw_event)
 {
 #define K7_EVNTSEL_EVENT_MASK	0x7000000FFULL
 #define K7_EVNTSEL_UNIT_MASK	0x00000FF00ULL
@@ -605,7 +605,7 @@ static u64 amd_pmu_raw_event(u64 event)
 	 K7_EVNTSEL_INV_MASK   |	\
 	 K7_EVNTSEL_COUNTER_MASK)
 
-	return event & K7_EVNTSEL_MASK;
+	return hw_event & K7_EVNTSEL_MASK;
 }
 
 /*
@@ -956,7 +956,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	}
 
 	/*
-	 * Raw event type provide the config in the event structure
+	 * Raw hw_event type provide the config in the hw_event structure
 	 */
 	if (attr->type == PERF_TYPE_RAW) {
 		hwc->config |= x86_pmu.raw_event(attr->config);
@@ -1245,7 +1245,7 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 		ret = 1;
 	}
 	/*
-	 * Quirk: certain CPUs dont like it if just 1 event is left:
+	 * Quirk: certain CPUs dont like it if just 1 hw_event is left:
 	 */
 	if (unlikely(left < 2))
 		left = 2;
@@ -1337,11 +1337,11 @@ static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 static int
 fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 {
-	unsigned int event;
+	unsigned int hw_event;
 
-	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
+	hw_event = hwc->config & ARCH_PERFMON_EVENT_MASK;
 
-	if (unlikely((event ==
+	if (unlikely((hw_event ==
 		      x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS)) &&
 		     (hwc->sample_period == 1)))
 		return X86_PMC_IDX_FIXED_BTS;
@@ -1349,11 +1349,11 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
-	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
+	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
 		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
-	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
+	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
 		return X86_PMC_IDX_FIXED_CPU_CYCLES;
-	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_BUS_CYCLES)))
+	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_BUS_CYCLES)))
 		return X86_PMC_IDX_FIXED_BUS_CYCLES;
 
 	return -1;
@@ -1970,7 +1970,7 @@ static int intel_pmu_init(void)
 
 	/*
 	 * Check whether the Architectural PerfMon supports
-	 * Branch Misses Retired Event or not.
+	 * Branch Misses Retired hw_event or not.
 	 */
 	cpuid(10, &eax.full, &ebx, &unused, &edx.full);
 	if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
-- 
cgit v1.2.3


From cdd6c482c9ff9c55475ee7392ec8f672eddb7be6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 21 Sep 2009 12:02:48 +0200
Subject: perf: Do the big rename: Performance Counters -> Performance Events

Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/arm/include/asm/unistd.h           |    2 +-
 arch/arm/kernel/calls.S                 |    2 +-
 arch/blackfin/include/asm/unistd.h      |    2 +-
 arch/blackfin/mach-common/entry.S       |    2 +-
 arch/frv/Kconfig                        |    2 +-
 arch/frv/include/asm/perf_counter.h     |   17 -
 arch/frv/include/asm/perf_event.h       |   17 +
 arch/frv/include/asm/unistd.h           |    2 +-
 arch/frv/kernel/entry.S                 |    2 +-
 arch/frv/lib/Makefile                   |    2 +-
 arch/frv/lib/perf_counter.c             |   19 -
 arch/frv/lib/perf_event.c               |   19 +
 arch/m68k/include/asm/unistd.h          |    2 +-
 arch/m68k/kernel/entry.S                |    2 +-
 arch/m68knommu/kernel/syscalltable.S    |    2 +-
 arch/microblaze/include/asm/unistd.h    |    2 +-
 arch/microblaze/kernel/syscall_table.S  |    2 +-
 arch/mips/include/asm/unistd.h          |    6 +-
 arch/mips/kernel/scall32-o32.S          |    2 +-
 arch/mips/kernel/scall64-64.S           |    2 +-
 arch/mips/kernel/scall64-n32.S          |    2 +-
 arch/mips/kernel/scall64-o32.S          |    2 +-
 arch/mn10300/include/asm/unistd.h       |    2 +-
 arch/mn10300/kernel/entry.S             |    2 +-
 arch/parisc/Kconfig                     |    2 +-
 arch/parisc/include/asm/perf_counter.h  |    7 -
 arch/parisc/include/asm/perf_event.h    |    7 +
 arch/parisc/include/asm/unistd.h        |    4 +-
 arch/parisc/kernel/syscall_table.S      |    2 +-
 arch/powerpc/Kconfig                    |    2 +-
 arch/powerpc/include/asm/hw_irq.h       |   22 +-
 arch/powerpc/include/asm/paca.h         |    2 +-
 arch/powerpc/include/asm/perf_counter.h |  110 --
 arch/powerpc/include/asm/perf_event.h   |  110 ++
 arch/powerpc/include/asm/systbl.h       |    2 +-
 arch/powerpc/include/asm/unistd.h       |    2 +-
 arch/powerpc/kernel/Makefile            |    2 +-
 arch/powerpc/kernel/asm-offsets.c       |    2 +-
 arch/powerpc/kernel/entry_64.S          |    8 +-
 arch/powerpc/kernel/irq.c               |    8 +-
 arch/powerpc/kernel/mpc7450-pmu.c       |    2 +-
 arch/powerpc/kernel/perf_callchain.c    |    2 +-
 arch/powerpc/kernel/perf_counter.c      | 1315 ------------------
 arch/powerpc/kernel/perf_event.c        | 1315 ++++++++++++++++++
 arch/powerpc/kernel/power4-pmu.c        |    2 +-
 arch/powerpc/kernel/power5+-pmu.c       |    2 +-
 arch/powerpc/kernel/power5-pmu.c        |    2 +-
 arch/powerpc/kernel/power6-pmu.c        |    2 +-
 arch/powerpc/kernel/power7-pmu.c        |    2 +-
 arch/powerpc/kernel/ppc970-pmu.c        |    2 +-
 arch/powerpc/kernel/time.c              |   30 +-
 arch/powerpc/mm/fault.c                 |    8 +-
 arch/powerpc/platforms/Kconfig.cputype  |    4 +-
 arch/s390/Kconfig                       |    2 +-
 arch/s390/include/asm/perf_counter.h    |   10 -
 arch/s390/include/asm/perf_event.h      |   10 +
 arch/s390/include/asm/unistd.h          |    2 +-
 arch/s390/kernel/compat_wrapper.S       |    8 +-
 arch/s390/kernel/syscalls.S             |    2 +-
 arch/s390/mm/fault.c                    |    8 +-
 arch/sh/Kconfig                         |    2 +-
 arch/sh/include/asm/perf_counter.h      |    9 -
 arch/sh/include/asm/perf_event.h        |    9 +
 arch/sh/include/asm/unistd_32.h         |    2 +-
 arch/sh/include/asm/unistd_64.h         |    2 +-
 arch/sh/kernel/syscalls_32.S            |    2 +-
 arch/sh/kernel/syscalls_64.S            |    2 +-
 arch/sh/mm/fault_32.c                   |    8 +-
 arch/sh/mm/tlbflush_64.c                |    8 +-
 arch/sparc/Kconfig                      |    4 +-
 arch/sparc/include/asm/perf_counter.h   |   14 -
 arch/sparc/include/asm/perf_event.h     |   14 +
 arch/sparc/include/asm/unistd.h         |    2 +-
 arch/sparc/kernel/Makefile              |    2 +-
 arch/sparc/kernel/nmi.c                 |    4 +-
 arch/sparc/kernel/pcr.c                 |   10 +-
 arch/sparc/kernel/perf_counter.c        |  556 --------
 arch/sparc/kernel/perf_event.c          |  556 ++++++++
 arch/sparc/kernel/systbls_32.S          |    2 +-
 arch/sparc/kernel/systbls_64.S          |    4 +-
 arch/x86/Kconfig                        |    2 +-
 arch/x86/ia32/ia32entry.S               |    2 +-
 arch/x86/include/asm/entry_arch.h       |    2 +-
 arch/x86/include/asm/perf_counter.h     |  108 --
 arch/x86/include/asm/perf_event.h       |  108 ++
 arch/x86/include/asm/unistd_32.h        |    2 +-
 arch/x86/include/asm/unistd_64.h        |    4 +-
 arch/x86/kernel/apic/apic.c             |    6 +-
 arch/x86/kernel/cpu/Makefile            |    2 +-
 arch/x86/kernel/cpu/common.c            |    4 +-
 arch/x86/kernel/cpu/perf_counter.c      | 2298 -------------------------------
 arch/x86/kernel/cpu/perf_event.c        | 2298 +++++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/perfctr-watchdog.c  |    2 +-
 arch/x86/kernel/entry_64.S              |    2 +-
 arch/x86/kernel/irqinit.c               |    2 +-
 arch/x86/kernel/syscall_table_32.S      |    2 +-
 arch/x86/mm/fault.c                     |    8 +-
 arch/x86/oprofile/op_model_ppro.c       |    4 +-
 arch/x86/oprofile/op_x86_model.h        |    2 +-
 99 files changed, 4604 insertions(+), 4604 deletions(-)
 delete mode 100644 arch/frv/include/asm/perf_counter.h
 create mode 100644 arch/frv/include/asm/perf_event.h
 delete mode 100644 arch/frv/lib/perf_counter.c
 create mode 100644 arch/frv/lib/perf_event.c
 delete mode 100644 arch/parisc/include/asm/perf_counter.h
 create mode 100644 arch/parisc/include/asm/perf_event.h
 delete mode 100644 arch/powerpc/include/asm/perf_counter.h
 create mode 100644 arch/powerpc/include/asm/perf_event.h
 delete mode 100644 arch/powerpc/kernel/perf_counter.c
 create mode 100644 arch/powerpc/kernel/perf_event.c
 delete mode 100644 arch/s390/include/asm/perf_counter.h
 create mode 100644 arch/s390/include/asm/perf_event.h
 delete mode 100644 arch/sh/include/asm/perf_counter.h
 create mode 100644 arch/sh/include/asm/perf_event.h
 delete mode 100644 arch/sparc/include/asm/perf_counter.h
 create mode 100644 arch/sparc/include/asm/perf_event.h
 delete mode 100644 arch/sparc/kernel/perf_counter.c
 create mode 100644 arch/sparc/kernel/perf_event.c
 delete mode 100644 arch/x86/include/asm/perf_counter.h
 create mode 100644 arch/x86/include/asm/perf_event.h
 delete mode 100644 arch/x86/kernel/cpu/perf_counter.c
 create mode 100644 arch/x86/kernel/cpu/perf_event.c

(limited to 'arch')

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 9122c9ee18f..89f7eade20a 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -390,7 +390,7 @@
 #define __NR_preadv			(__NR_SYSCALL_BASE+361)
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
-#define __NR_perf_counter_open		(__NR_SYSCALL_BASE+364)
+#define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index ecfa98954d1..fafce1b5c69 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -373,7 +373,7 @@
 		CALL(sys_preadv)
 		CALL(sys_pwritev)
 		CALL(sys_rt_tgsigqueueinfo)
-		CALL(sys_perf_counter_open)
+		CALL(sys_perf_event_open)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index c8e7ee4768c..02b1529dad5 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -381,7 +381,7 @@
 #define __NR_preadv		366
 #define __NR_pwritev		367
 #define __NR_rt_tgsigqueueinfo	368
-#define __NR_perf_counter_open	369
+#define __NR_perf_event_open	369
 
 #define __NR_syscall		370
 #define NR_syscalls		__NR_syscall
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 01af24cde36..1e7cac23e25 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1620,7 +1620,7 @@ ENTRY(_sys_call_table)
 	.long _sys_preadv
 	.long _sys_pwritev
 	.long _sys_rt_tgsigqueueinfo
-	.long _sys_perf_counter_open
+	.long _sys_perf_event_open
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index b86e19c9b5b..4b5830bcbe2 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -7,7 +7,7 @@ config FRV
 	default y
 	select HAVE_IDE
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_PERF_COUNTERS
+	select HAVE_PERF_EVENTS
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/perf_counter.h b/arch/frv/include/asm/perf_counter.h
deleted file mode 100644
index ccf726e61b2..00000000000
--- a/arch/frv/include/asm/perf_counter.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* FRV performance counter support
- *
- * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_PERF_COUNTER_H
-#define _ASM_PERF_COUNTER_H
-
-#define PERF_COUNTER_INDEX_OFFSET	0
-
-#endif /* _ASM_PERF_COUNTER_H */
diff --git a/arch/frv/include/asm/perf_event.h b/arch/frv/include/asm/perf_event.h
new file mode 100644
index 00000000000..a69e0155d14
--- /dev/null
+++ b/arch/frv/include/asm/perf_event.h
@@ -0,0 +1,17 @@
+/* FRV performance event support
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PERF_EVENT_H
+#define _ASM_PERF_EVENT_H
+
+#define PERF_EVENT_INDEX_OFFSET	0
+
+#endif /* _ASM_PERF_EVENT_H */
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 4a8fb427ce0..be6ef0f5cd4 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -342,7 +342,7 @@
 #define __NR_preadv		333
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
-#define __NR_perf_counter_open	336
+#define __NR_perf_event_open	336
 
 #ifdef __KERNEL__
 
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index fde1e446b44..189397ec012 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1525,6 +1525,6 @@ sys_call_table:
 	.long sys_preadv
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile
index 0a377210c89..f4709756d0d 100644
--- a/arch/frv/lib/Makefile
+++ b/arch/frv/lib/Makefile
@@ -5,4 +5,4 @@
 lib-y := \
 	__ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \
 	checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \
-	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_counter.o
+	outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o perf_event.o
diff --git a/arch/frv/lib/perf_counter.c b/arch/frv/lib/perf_counter.c
deleted file mode 100644
index 2000feecd57..00000000000
--- a/arch/frv/lib/perf_counter.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/* Performance counter handling
- *
- * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#include <linux/perf_counter.h>
-
-/*
- * mark the performance counter as pending
- */
-void set_perf_counter_pending(void)
-{
-}
diff --git a/arch/frv/lib/perf_event.c b/arch/frv/lib/perf_event.c
new file mode 100644
index 00000000000..9ac5acfd2e9
--- /dev/null
+++ b/arch/frv/lib/perf_event.c
@@ -0,0 +1,19 @@
+/* Performance event handling
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/perf_event.h>
+
+/*
+ * mark the performance event as pending
+ */
+void set_perf_event_pending(void)
+{
+}
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 946d8691f2b..48b87f5ced5 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -335,7 +335,7 @@
 #define __NR_preadv		329
 #define __NR_pwritev		330
 #define __NR_rt_tgsigqueueinfo	331
-#define __NR_perf_counter_open	332
+#define __NR_perf_event_open	332
 
 #ifdef __KERNEL__
 
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 922f52e7ed1..c5b33634c98 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -756,5 +756,5 @@ sys_call_table:
 	.long sys_preadv
 	.long sys_pwritev		/* 330 */
 	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
 
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 0ae123e0898..23535cc415a 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -350,7 +350,7 @@ ENTRY(sys_call_table)
 	.long sys_preadv
 	.long sys_pwritev		/* 330 */
 	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index 0b852327c0e..cb05a07e55e 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -381,7 +381,7 @@
 #define __NR_preadv		363 /* new */
 #define __NR_pwritev		364 /* new */
 #define __NR_rt_tgsigqueueinfo	365 /* new */
-#define __NR_perf_counter_open	366 /* new */
+#define __NR_perf_event_open	366 /* new */
 
 #define __NR_syscalls		367
 
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 457216097df..ecec1915513 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -370,4 +370,4 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall
 	.long sys_ni_syscall
 	.long sys_rt_tgsigqueueinfo	/* 365 */
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index e753a777949..8c9dfa9e901 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -353,7 +353,7 @@
 #define __NR_preadv			(__NR_Linux + 330)
 #define __NR_pwritev			(__NR_Linux + 331)
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
-#define __NR_perf_counter_open		(__NR_Linux + 333)
+#define __NR_perf_event_open		(__NR_Linux + 333)
 #define __NR_accept4			(__NR_Linux + 334)
 
 /*
@@ -664,7 +664,7 @@
 #define __NR_preadv			(__NR_Linux + 289)
 #define __NR_pwritev			(__NR_Linux + 290)
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
-#define __NR_perf_counter_open		(__NR_Linux + 292)
+#define __NR_perf_event_open		(__NR_Linux + 292)
 #define __NR_accept4			(__NR_Linux + 293)
 
 /*
@@ -979,7 +979,7 @@
 #define __NR_preadv			(__NR_Linux + 293)
 #define __NR_pwritev			(__NR_Linux + 294)
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
-#define __NR_perf_counter_open		(__NR_Linux + 296)
+#define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
 
 /*
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 7c2de4f091c..fd2a9bb620d 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -581,7 +581,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_preadv		6	/* 4330 */
 	sys	sys_pwritev		6
 	sys	sys_rt_tgsigqueueinfo	4
-	sys	sys_perf_counter_open	5
+	sys	sys_perf_event_open	5
 	sys	sys_accept4		4
 	.endm
 
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index b97b993846d..18bf7f32c5e 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -418,6 +418,6 @@ sys_call_table:
 	PTR	sys_preadv
 	PTR	sys_pwritev			/* 5390 */
 	PTR	sys_rt_tgsigqueueinfo
-	PTR	sys_perf_counter_open
+	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 1a6ae124635..6ebc0797669 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -416,6 +416,6 @@ EXPORT(sysn32_call_table)
 	PTR	sys_preadv
 	PTR	sys_pwritev
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
-	PTR	sys_perf_counter_open
+	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index cd31087a651..9bbf9775e0b 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -536,6 +536,6 @@ sys_call_table:
 	PTR	compat_sys_preadv		/* 4330 */
 	PTR	compat_sys_pwritev
 	PTR	compat_sys_rt_tgsigqueueinfo
-	PTR	sys_perf_counter_open
+	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index fad68616af3..2a983931c11 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -347,7 +347,7 @@
 #define __NR_preadv		334
 #define __NR_pwritev		335
 #define __NR_rt_tgsigqueueinfo	336
-#define __NR_perf_counter_open	337
+#define __NR_perf_event_open	337
 
 #ifdef __KERNEL__
 
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index e0d2563af4f..a94e7ea3faa 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -723,7 +723,7 @@ ENTRY(sys_call_table)
 	.long sys_preadv
 	.long sys_pwritev		/* 335 */
 	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 06f8d5b5b0f..f388dc68f60 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -16,7 +16,7 @@ config PARISC
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
-	select HAVE_PERF_COUNTERS
+	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/parisc/include/asm/perf_counter.h b/arch/parisc/include/asm/perf_counter.h
deleted file mode 100644
index dc9e829f701..00000000000
--- a/arch/parisc/include/asm/perf_counter.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_PARISC_PERF_COUNTER_H
-#define __ASM_PARISC_PERF_COUNTER_H
-
-/* parisc only supports software counters through this interface. */
-static inline void set_perf_counter_pending(void) { }
-
-#endif /* __ASM_PARISC_PERF_COUNTER_H */
diff --git a/arch/parisc/include/asm/perf_event.h b/arch/parisc/include/asm/perf_event.h
new file mode 100644
index 00000000000..cc146427d8f
--- /dev/null
+++ b/arch/parisc/include/asm/perf_event.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_PARISC_PERF_EVENT_H
+#define __ASM_PARISC_PERF_EVENT_H
+
+/* parisc only supports software events through this interface. */
+static inline void set_perf_event_pending(void) { }
+
+#endif /* __ASM_PARISC_PERF_EVENT_H */
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index f3d3b8b012c..cda158318c6 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -810,9 +810,9 @@
 #define __NR_preadv		(__NR_Linux + 315)
 #define __NR_pwritev		(__NR_Linux + 316)
 #define __NR_rt_tgsigqueueinfo	(__NR_Linux + 317)
-#define __NR_perf_counter_open	(__NR_Linux + 318)
+#define __NR_perf_event_open	(__NR_Linux + 318)
 
-#define __NR_Linux_syscalls	(__NR_perf_counter_open + 1)
+#define __NR_Linux_syscalls	(__NR_perf_event_open + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index cf145eb026b..843f423dec6 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -416,7 +416,7 @@
 	ENTRY_COMP(preadv)		/* 315 */
 	ENTRY_COMP(pwritev)
 	ENTRY_COMP(rt_tgsigqueueinfo)
-	ENTRY_SAME(perf_counter_open)
+	ENTRY_SAME(perf_event_open)
 
 	/* Nothing yet */
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8250902265c..4fd479059d6 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -129,7 +129,7 @@ config PPC
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
 	select GENERIC_ATOMIC64 if PPC32
-	select HAVE_PERF_COUNTERS
+	select HAVE_PERF_EVENTS
 
 config EARLY_PRINTK
 	bool
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index e73d554538d..abbc2aaaced 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -135,43 +135,43 @@ static inline int irqs_disabled_flags(unsigned long flags)
  */
 struct irq_chip;
 
-#ifdef CONFIG_PERF_COUNTERS
+#ifdef CONFIG_PERF_EVENTS
 
 #ifdef CONFIG_PPC64
-static inline unsigned long test_perf_counter_pending(void)
+static inline unsigned long test_perf_event_pending(void)
 {
 	unsigned long x;
 
 	asm volatile("lbz %0,%1(13)"
 		: "=r" (x)
-		: "i" (offsetof(struct paca_struct, perf_counter_pending)));
+		: "i" (offsetof(struct paca_struct, perf_event_pending)));
 	return x;
 }
 
-static inline void set_perf_counter_pending(void)
+static inline void set_perf_event_pending(void)
 {
 	asm volatile("stb %0,%1(13)" : :
 		"r" (1),
-		"i" (offsetof(struct paca_struct, perf_counter_pending)));
+		"i" (offsetof(struct paca_struct, perf_event_pending)));
 }
 
-static inline void clear_perf_counter_pending(void)
+static inline void clear_perf_event_pending(void)
 {
 	asm volatile("stb %0,%1(13)" : :
 		"r" (0),
-		"i" (offsetof(struct paca_struct, perf_counter_pending)));
+		"i" (offsetof(struct paca_struct, perf_event_pending)));
 }
 #endif /* CONFIG_PPC64 */
 
-#else  /* CONFIG_PERF_COUNTERS */
+#else  /* CONFIG_PERF_EVENTS */
 
-static inline unsigned long test_perf_counter_pending(void)
+static inline unsigned long test_perf_event_pending(void)
 {
 	return 0;
 }
 
-static inline void clear_perf_counter_pending(void) {}
-#endif /* CONFIG_PERF_COUNTERS */
+static inline void clear_perf_event_pending(void) {}
+#endif /* CONFIG_PERF_EVENTS */
 
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index b634456ea89..154f405b642 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -122,7 +122,7 @@ struct paca_struct {
 	u8 soft_enabled;		/* irq soft-enable flag */
 	u8 hard_enabled;		/* set if irqs are enabled in MSR */
 	u8 io_sync;			/* writel() needs spin_unlock sync */
-	u8 perf_counter_pending;	/* PM interrupt while soft-disabled */
+	u8 perf_event_pending;	/* PM interrupt while soft-disabled */
 
 	/* Stuff for accurate time accounting */
 	u64 user_time;			/* accumulated usermode TB ticks */
diff --git a/arch/powerpc/include/asm/perf_counter.h b/arch/powerpc/include/asm/perf_counter.h
deleted file mode 100644
index 0ea0639fcf7..00000000000
--- a/arch/powerpc/include/asm/perf_counter.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Performance counter support - PowerPC-specific definitions.
- *
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-
-#include <asm/hw_irq.h>
-
-#define MAX_HWCOUNTERS		8
-#define MAX_EVENT_ALTERNATIVES	8
-#define MAX_LIMITED_HWCOUNTERS	2
-
-/*
- * This struct provides the constants and functions needed to
- * describe the PMU on a particular POWER-family CPU.
- */
-struct power_pmu {
-	const char	*name;
-	int		n_counter;
-	int		max_alternatives;
-	unsigned long	add_fields;
-	unsigned long	test_adder;
-	int		(*compute_mmcr)(u64 events[], int n_ev,
-				unsigned int hwc[], unsigned long mmcr[]);
-	int		(*get_constraint)(u64 event, unsigned long *mskp,
-				unsigned long *valp);
-	int		(*get_alternatives)(u64 event, unsigned int flags,
-				u64 alt[]);
-	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
-	int		(*limited_pmc_event)(u64 event);
-	u32		flags;
-	int		n_generic;
-	int		*generic_events;
-	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
-			       [PERF_COUNT_HW_CACHE_OP_MAX]
-			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
-};
-
-/*
- * Values for power_pmu.flags
- */
-#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
-#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
-
-/*
- * Values for flags to get_alternatives()
- */
-#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
-#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
-#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
-
-extern int register_power_pmu(struct power_pmu *);
-
-struct pt_regs;
-extern unsigned long perf_misc_flags(struct pt_regs *regs);
-extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
-
-#define PERF_COUNTER_INDEX_OFFSET	1
-
-/*
- * Only override the default definitions in include/linux/perf_counter.h
- * if we have hardware PMU support.
- */
-#ifdef CONFIG_PPC_PERF_CTRS
-#define perf_misc_flags(regs)	perf_misc_flags(regs)
-#endif
-
-/*
- * The power_pmu.get_constraint function returns a 32/64-bit value and
- * a 32/64-bit mask that express the constraints between this event and
- * other events.
- *
- * The value and mask are divided up into (non-overlapping) bitfields
- * of three different types:
- *
- * Select field: this expresses the constraint that some set of bits
- * in MMCR* needs to be set to a specific value for this event.  For a
- * select field, the mask contains 1s in every bit of the field, and
- * the value contains a unique value for each possible setting of the
- * MMCR* bits.  The constraint checking code will ensure that two events
- * that set the same field in their masks have the same value in their
- * value dwords.
- *
- * Add field: this expresses the constraint that there can be at most
- * N events in a particular class.  A field of k bits can be used for
- * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
- * set (and the other bits 0), and the value has only the least significant
- * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
- * in the struct power_pmu for this processor come into play.  The
- * add_fields value contains 1 in the LSB of the field, and the
- * test_adder contains 2^(k-1) - 1 - N in the field.
- *
- * NAND field: this expresses the constraint that you may not have events
- * in all of a set of classes.  (For example, on PPC970, you can't select
- * events from the FPU, ISU and IDU simultaneously, although any two are
- * possible.)  For N classes, the field is N+1 bits wide, and each class
- * is assigned one bit from the least-significant N bits.  The mask has
- * only the most-significant bit set, and the value has only the bit
- * for the event's class set.  The test_adder has the least significant
- * bit set in the field.
- *
- * If an event is not subject to the constraint expressed by a particular
- * field, then it will have 0 in both the mask and value for that field.
- */
diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
new file mode 100644
index 00000000000..2499aaadaeb
--- /dev/null
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -0,0 +1,110 @@
+/*
+ * Performance event support - PowerPC-specific definitions.
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+
+#include <asm/hw_irq.h>
+
+#define MAX_HWEVENTS		8
+#define MAX_EVENT_ALTERNATIVES	8
+#define MAX_LIMITED_HWEVENTS	2
+
+/*
+ * This struct provides the constants and functions needed to
+ * describe the PMU on a particular POWER-family CPU.
+ */
+struct power_pmu {
+	const char	*name;
+	int		n_event;
+	int		max_alternatives;
+	unsigned long	add_fields;
+	unsigned long	test_adder;
+	int		(*compute_mmcr)(u64 events[], int n_ev,
+				unsigned int hwc[], unsigned long mmcr[]);
+	int		(*get_constraint)(u64 event_id, unsigned long *mskp,
+				unsigned long *valp);
+	int		(*get_alternatives)(u64 event_id, unsigned int flags,
+				u64 alt[]);
+	void		(*disable_pmc)(unsigned int pmc, unsigned long mmcr[]);
+	int		(*limited_pmc_event)(u64 event_id);
+	u32		flags;
+	int		n_generic;
+	int		*generic_events;
+	int		(*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+			       [PERF_COUNT_HW_CACHE_OP_MAX]
+			       [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+/*
+ * Values for power_pmu.flags
+ */
+#define PPMU_LIMITED_PMC5_6	1	/* PMC5/6 have limited function */
+#define PPMU_ALT_SIPR		2	/* uses alternate posn for SIPR/HV */
+
+/*
+ * Values for flags to get_alternatives()
+ */
+#define PPMU_LIMITED_PMC_OK	1	/* can put this on a limited PMC */
+#define PPMU_LIMITED_PMC_REQD	2	/* have to put this on a limited PMC */
+#define PPMU_ONLY_COUNT_RUN	4	/* only counting in run state */
+
+extern int register_power_pmu(struct power_pmu *);
+
+struct pt_regs;
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+
+#define PERF_EVENT_INDEX_OFFSET	1
+
+/*
+ * Only override the default definitions in include/linux/perf_event.h
+ * if we have hardware PMU support.
+ */
+#ifdef CONFIG_PPC_PERF_CTRS
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#endif
+
+/*
+ * The power_pmu.get_constraint function returns a 32/64-bit value and
+ * a 32/64-bit mask that express the constraints between this event_id and
+ * other events.
+ *
+ * The value and mask are divided up into (non-overlapping) bitfields
+ * of three different types:
+ *
+ * Select field: this expresses the constraint that some set of bits
+ * in MMCR* needs to be set to a specific value for this event_id.  For a
+ * select field, the mask contains 1s in every bit of the field, and
+ * the value contains a unique value for each possible setting of the
+ * MMCR* bits.  The constraint checking code will ensure that two events
+ * that set the same field in their masks have the same value in their
+ * value dwords.
+ *
+ * Add field: this expresses the constraint that there can be at most
+ * N events in a particular class.  A field of k bits can be used for
+ * N <= 2^(k-1) - 1.  The mask has the most significant bit of the field
+ * set (and the other bits 0), and the value has only the least significant
+ * bit of the field set.  In addition, the 'add_fields' and 'test_adder'
+ * in the struct power_pmu for this processor come into play.  The
+ * add_fields value contains 1 in the LSB of the field, and the
+ * test_adder contains 2^(k-1) - 1 - N in the field.
+ *
+ * NAND field: this expresses the constraint that you may not have events
+ * in all of a set of classes.  (For example, on PPC970, you can't select
+ * events from the FPU, ISU and IDU simultaneously, although any two are
+ * possible.)  For N classes, the field is N+1 bits wide, and each class
+ * is assigned one bit from the least-significant N bits.  The mask has
+ * only the most-significant bit set, and the value has only the bit
+ * for the event_id's class set.  The test_adder has the least significant
+ * bit set in the field.
+ *
+ * If an event_id is not subject to the constraint expressed by a particular
+ * field, then it will have 0 in both the mask and value for that field.
+ */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index ed24bd92fe4..c7d671a7d9a 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -322,7 +322,7 @@ SYSCALL_SPU(epoll_create1)
 SYSCALL_SPU(dup3)
 SYSCALL_SPU(pipe2)
 SYSCALL(inotify_init1)
-SYSCALL_SPU(perf_counter_open)
+SYSCALL_SPU(perf_event_open)
 COMPAT_SYS_SPU(preadv)
 COMPAT_SYS_SPU(pwritev)
 COMPAT_SYS(rt_tgsigqueueinfo)
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index cef080bfc60..f6ca7617676 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -341,7 +341,7 @@
 #define __NR_dup3		316
 #define __NR_pipe2		317
 #define __NR_inotify_init1	318
-#define __NR_perf_counter_open	319
+#define __NR_perf_event_open	319
 #define __NR_preadv		320
 #define __NR_pwritev		321
 #define __NR_rt_tgsigqueueinfo	322
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 569f79ccd31..b23664a0b86 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -97,7 +97,7 @@ obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
-obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_counter.o perf_callchain.o
+obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_event.o perf_callchain.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index f0df285f0f8..0812b0f414b 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -133,7 +133,7 @@ int main(void)
 	DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
-	DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_counter_pending));
+	DEFINE(PACAPERFPEND, offsetof(struct paca_struct, perf_event_pending));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
 #ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 66bcda34a6b..900e0eea009 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -556,14 +556,14 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 2:
 	TRACE_AND_RESTORE_IRQ(r5);
 
-#ifdef CONFIG_PERF_COUNTERS
-	/* check paca->perf_counter_pending if we're enabling ints */
+#ifdef CONFIG_PERF_EVENTS
+	/* check paca->perf_event_pending if we're enabling ints */
 	lbz	r3,PACAPERFPEND(r13)
 	and.	r3,r3,r5
 	beq	27f
-	bl	.perf_counter_do_pending
+	bl	.perf_event_do_pending
 27:
-#endif /* CONFIG_PERF_COUNTERS */
+#endif /* CONFIG_PERF_EVENTS */
 
 	/* extract EE bit and use it to restore paca->hard_enabled */
 	ld	r3,_MSR(r1)
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index f7f376ea7b1..e5d12117798 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -53,7 +53,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/debugfs.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -138,9 +138,9 @@ notrace void raw_local_irq_restore(unsigned long en)
 	}
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
-	if (test_perf_counter_pending()) {
-		clear_perf_counter_pending();
-		perf_counter_do_pending();
+	if (test_perf_event_pending()) {
+		clear_perf_event_pending();
+		perf_event_do_pending();
 	}
 
 	/*
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index cc466d039af..09d72028f31 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/string.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c
index f74b62c6751..0a03cf70d24 100644
--- a/arch/powerpc/kernel/perf_callchain.c
+++ b/arch/powerpc/kernel/perf_callchain.c
@@ -10,7 +10,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/percpu.h>
 #include <linux/uaccess.h>
 #include <linux/mm.h>
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
deleted file mode 100644
index 5ccf9bca96c..00000000000
--- a/arch/powerpc/kernel/perf_counter.c
+++ /dev/null
@@ -1,1315 +0,0 @@
-/*
- * Performance counter support - powerpc architecture code
- *
- * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/perf_counter.h>
-#include <linux/percpu.h>
-#include <linux/hardirq.h>
-#include <asm/reg.h>
-#include <asm/pmc.h>
-#include <asm/machdep.h>
-#include <asm/firmware.h>
-#include <asm/ptrace.h>
-
-struct cpu_hw_counters {
-	int n_counters;
-	int n_percpu;
-	int disabled;
-	int n_added;
-	int n_limited;
-	u8  pmcs_enabled;
-	struct perf_counter *counter[MAX_HWCOUNTERS];
-	u64 events[MAX_HWCOUNTERS];
-	unsigned int flags[MAX_HWCOUNTERS];
-	unsigned long mmcr[3];
-	struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS];
-	u8  limited_hwidx[MAX_LIMITED_HWCOUNTERS];
-	u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-};
-DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters);
-
-struct power_pmu *ppmu;
-
-/*
- * Normally, to ignore kernel events we set the FCS (freeze counters
- * in supervisor mode) bit in MMCR0, but if the kernel runs with the
- * hypervisor bit set in the MSR, or if we are running on a processor
- * where the hypervisor bit is forced to 1 (as on Apple G5 processors),
- * then we need to use the FCHV bit to ignore kernel events.
- */
-static unsigned int freeze_counters_kernel = MMCR0_FCS;
-
-/*
- * 32-bit doesn't have MMCRA but does have an MMCR2,
- * and a few other names are different.
- */
-#ifdef CONFIG_PPC32
-
-#define MMCR0_FCHV		0
-#define MMCR0_PMCjCE		MMCR0_PMCnCE
-
-#define SPRN_MMCRA		SPRN_MMCR2
-#define MMCRA_SAMPLE_ENABLE	0
-
-static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
-{
-	return 0;
-}
-static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
-static inline u32 perf_get_misc_flags(struct pt_regs *regs)
-{
-	return 0;
-}
-static inline void perf_read_regs(struct pt_regs *regs) { }
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PPC32 */
-
-/*
- * Things that are specific to 64-bit implementations.
- */
-#ifdef CONFIG_PPC64
-
-static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
-{
-	unsigned long mmcra = regs->dsisr;
-
-	if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) {
-		unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT;
-		if (slot > 1)
-			return 4 * (slot - 1);
-	}
-	return 0;
-}
-
-/*
- * The user wants a data address recorded.
- * If we're not doing instruction sampling, give them the SDAR
- * (sampled data address).  If we are doing instruction sampling, then
- * only give them the SDAR if it corresponds to the instruction
- * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC
- * bit in MMCRA.
- */
-static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
-{
-	unsigned long mmcra = regs->dsisr;
-	unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
-		POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
-
-	if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
-		*addrp = mfspr(SPRN_SDAR);
-}
-
-static inline u32 perf_get_misc_flags(struct pt_regs *regs)
-{
-	unsigned long mmcra = regs->dsisr;
-
-	if (TRAP(regs) != 0xf00)
-		return 0;	/* not a PMU interrupt */
-
-	if (ppmu->flags & PPMU_ALT_SIPR) {
-		if (mmcra & POWER6_MMCRA_SIHV)
-			return PERF_EVENT_MISC_HYPERVISOR;
-		return (mmcra & POWER6_MMCRA_SIPR) ?
-			PERF_EVENT_MISC_USER : PERF_EVENT_MISC_KERNEL;
-	}
-	if (mmcra & MMCRA_SIHV)
-		return PERF_EVENT_MISC_HYPERVISOR;
-	return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER :
-		PERF_EVENT_MISC_KERNEL;
-}
-
-/*
- * Overload regs->dsisr to store MMCRA so we only need to read it once
- * on each interrupt.
- */
-static inline void perf_read_regs(struct pt_regs *regs)
-{
-	regs->dsisr = mfspr(SPRN_MMCRA);
-}
-
-/*
- * If interrupts were soft-disabled when a PMU interrupt occurs, treat
- * it as an NMI.
- */
-static inline int perf_intr_is_nmi(struct pt_regs *regs)
-{
-	return !regs->softe;
-}
-
-#endif /* CONFIG_PPC64 */
-
-static void perf_counter_interrupt(struct pt_regs *regs);
-
-void perf_counter_print_debug(void)
-{
-}
-
-/*
- * Read one performance monitor counter (PMC).
- */
-static unsigned long read_pmc(int idx)
-{
-	unsigned long val;
-
-	switch (idx) {
-	case 1:
-		val = mfspr(SPRN_PMC1);
-		break;
-	case 2:
-		val = mfspr(SPRN_PMC2);
-		break;
-	case 3:
-		val = mfspr(SPRN_PMC3);
-		break;
-	case 4:
-		val = mfspr(SPRN_PMC4);
-		break;
-	case 5:
-		val = mfspr(SPRN_PMC5);
-		break;
-	case 6:
-		val = mfspr(SPRN_PMC6);
-		break;
-#ifdef CONFIG_PPC64
-	case 7:
-		val = mfspr(SPRN_PMC7);
-		break;
-	case 8:
-		val = mfspr(SPRN_PMC8);
-		break;
-#endif /* CONFIG_PPC64 */
-	default:
-		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
-		val = 0;
-	}
-	return val;
-}
-
-/*
- * Write one PMC.
- */
-static void write_pmc(int idx, unsigned long val)
-{
-	switch (idx) {
-	case 1:
-		mtspr(SPRN_PMC1, val);
-		break;
-	case 2:
-		mtspr(SPRN_PMC2, val);
-		break;
-	case 3:
-		mtspr(SPRN_PMC3, val);
-		break;
-	case 4:
-		mtspr(SPRN_PMC4, val);
-		break;
-	case 5:
-		mtspr(SPRN_PMC5, val);
-		break;
-	case 6:
-		mtspr(SPRN_PMC6, val);
-		break;
-#ifdef CONFIG_PPC64
-	case 7:
-		mtspr(SPRN_PMC7, val);
-		break;
-	case 8:
-		mtspr(SPRN_PMC8, val);
-		break;
-#endif /* CONFIG_PPC64 */
-	default:
-		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
-	}
-}
-
-/*
- * Check if a set of events can all go on the PMU at once.
- * If they can't, this will look at alternative codes for the events
- * and see if any combination of alternative codes is feasible.
- * The feasible set is returned in event[].
- */
-static int power_check_constraints(struct cpu_hw_counters *cpuhw,
-				   u64 event[], unsigned int cflags[],
-				   int n_ev)
-{
-	unsigned long mask, value, nv;
-	unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
-	int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS];
-	int i, j;
-	unsigned long addf = ppmu->add_fields;
-	unsigned long tadd = ppmu->test_adder;
-
-	if (n_ev > ppmu->n_counter)
-		return -1;
-
-	/* First see if the events will go on as-is */
-	for (i = 0; i < n_ev; ++i) {
-		if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
-		    && !ppmu->limited_pmc_event(event[i])) {
-			ppmu->get_alternatives(event[i], cflags[i],
-					       cpuhw->alternatives[i]);
-			event[i] = cpuhw->alternatives[i][0];
-		}
-		if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0],
-					 &cpuhw->avalues[i][0]))
-			return -1;
-	}
-	value = mask = 0;
-	for (i = 0; i < n_ev; ++i) {
-		nv = (value | cpuhw->avalues[i][0]) +
-			(value & cpuhw->avalues[i][0] & addf);
-		if ((((nv + tadd) ^ value) & mask) != 0 ||
-		    (((nv + tadd) ^ cpuhw->avalues[i][0]) &
-		     cpuhw->amasks[i][0]) != 0)
-			break;
-		value = nv;
-		mask |= cpuhw->amasks[i][0];
-	}
-	if (i == n_ev)
-		return 0;	/* all OK */
-
-	/* doesn't work, gather alternatives... */
-	if (!ppmu->get_alternatives)
-		return -1;
-	for (i = 0; i < n_ev; ++i) {
-		choice[i] = 0;
-		n_alt[i] = ppmu->get_alternatives(event[i], cflags[i],
-						  cpuhw->alternatives[i]);
-		for (j = 1; j < n_alt[i]; ++j)
-			ppmu->get_constraint(cpuhw->alternatives[i][j],
-					     &cpuhw->amasks[i][j],
-					     &cpuhw->avalues[i][j]);
-	}
-
-	/* enumerate all possibilities and see if any will work */
-	i = 0;
-	j = -1;
-	value = mask = nv = 0;
-	while (i < n_ev) {
-		if (j >= 0) {
-			/* we're backtracking, restore context */
-			value = svalues[i];
-			mask = smasks[i];
-			j = choice[i];
-		}
-		/*
-		 * See if any alternative k for event i,
-		 * where k > j, will satisfy the constraints.
-		 */
-		while (++j < n_alt[i]) {
-			nv = (value | cpuhw->avalues[i][j]) +
-				(value & cpuhw->avalues[i][j] & addf);
-			if ((((nv + tadd) ^ value) & mask) == 0 &&
-			    (((nv + tadd) ^ cpuhw->avalues[i][j])
-			     & cpuhw->amasks[i][j]) == 0)
-				break;
-		}
-		if (j >= n_alt[i]) {
-			/*
-			 * No feasible alternative, backtrack
-			 * to event i-1 and continue enumerating its
-			 * alternatives from where we got up to.
-			 */
-			if (--i < 0)
-				return -1;
-		} else {
-			/*
-			 * Found a feasible alternative for event i,
-			 * remember where we got up to with this event,
-			 * go on to the next event, and start with
-			 * the first alternative for it.
-			 */
-			choice[i] = j;
-			svalues[i] = value;
-			smasks[i] = mask;
-			value = nv;
-			mask |= cpuhw->amasks[i][j];
-			++i;
-			j = -1;
-		}
-	}
-
-	/* OK, we have a feasible combination, tell the caller the solution */
-	for (i = 0; i < n_ev; ++i)
-		event[i] = cpuhw->alternatives[i][choice[i]];
-	return 0;
-}
-
-/*
- * Check if newly-added counters have consistent settings for
- * exclude_{user,kernel,hv} with each other and any previously
- * added counters.
- */
-static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[],
-			  int n_prev, int n_new)
-{
-	int eu = 0, ek = 0, eh = 0;
-	int i, n, first;
-	struct perf_counter *counter;
-
-	n = n_prev + n_new;
-	if (n <= 1)
-		return 0;
-
-	first = 1;
-	for (i = 0; i < n; ++i) {
-		if (cflags[i] & PPMU_LIMITED_PMC_OK) {
-			cflags[i] &= ~PPMU_LIMITED_PMC_REQD;
-			continue;
-		}
-		counter = ctrs[i];
-		if (first) {
-			eu = counter->attr.exclude_user;
-			ek = counter->attr.exclude_kernel;
-			eh = counter->attr.exclude_hv;
-			first = 0;
-		} else if (counter->attr.exclude_user != eu ||
-			   counter->attr.exclude_kernel != ek ||
-			   counter->attr.exclude_hv != eh) {
-			return -EAGAIN;
-		}
-	}
-
-	if (eu || ek || eh)
-		for (i = 0; i < n; ++i)
-			if (cflags[i] & PPMU_LIMITED_PMC_OK)
-				cflags[i] |= PPMU_LIMITED_PMC_REQD;
-
-	return 0;
-}
-
-static void power_pmu_read(struct perf_counter *counter)
-{
-	s64 val, delta, prev;
-
-	if (!counter->hw.idx)
-		return;
-	/*
-	 * Performance monitor interrupts come even when interrupts
-	 * are soft-disabled, as long as interrupts are hard-enabled.
-	 * Therefore we treat them like NMIs.
-	 */
-	do {
-		prev = atomic64_read(&counter->hw.prev_count);
-		barrier();
-		val = read_pmc(counter->hw.idx);
-	} while (atomic64_cmpxchg(&counter->hw.prev_count, prev, val) != prev);
-
-	/* The counters are only 32 bits wide */
-	delta = (val - prev) & 0xfffffffful;
-	atomic64_add(delta, &counter->count);
-	atomic64_sub(delta, &counter->hw.period_left);
-}
-
-/*
- * On some machines, PMC5 and PMC6 can't be written, don't respect
- * the freeze conditions, and don't generate interrupts.  This tells
- * us if `counter' is using such a PMC.
- */
-static int is_limited_pmc(int pmcnum)
-{
-	return (ppmu->flags & PPMU_LIMITED_PMC5_6)
-		&& (pmcnum == 5 || pmcnum == 6);
-}
-
-static void freeze_limited_counters(struct cpu_hw_counters *cpuhw,
-				    unsigned long pmc5, unsigned long pmc6)
-{
-	struct perf_counter *counter;
-	u64 val, prev, delta;
-	int i;
-
-	for (i = 0; i < cpuhw->n_limited; ++i) {
-		counter = cpuhw->limited_counter[i];
-		if (!counter->hw.idx)
-			continue;
-		val = (counter->hw.idx == 5) ? pmc5 : pmc6;
-		prev = atomic64_read(&counter->hw.prev_count);
-		counter->hw.idx = 0;
-		delta = (val - prev) & 0xfffffffful;
-		atomic64_add(delta, &counter->count);
-	}
-}
-
-static void thaw_limited_counters(struct cpu_hw_counters *cpuhw,
-				  unsigned long pmc5, unsigned long pmc6)
-{
-	struct perf_counter *counter;
-	u64 val;
-	int i;
-
-	for (i = 0; i < cpuhw->n_limited; ++i) {
-		counter = cpuhw->limited_counter[i];
-		counter->hw.idx = cpuhw->limited_hwidx[i];
-		val = (counter->hw.idx == 5) ? pmc5 : pmc6;
-		atomic64_set(&counter->hw.prev_count, val);
-		perf_counter_update_userpage(counter);
-	}
-}
-
-/*
- * Since limited counters don't respect the freeze conditions, we
- * have to read them immediately after freezing or unfreezing the
- * other counters.  We try to keep the values from the limited
- * counters as consistent as possible by keeping the delay (in
- * cycles and instructions) between freezing/unfreezing and reading
- * the limited counters as small and consistent as possible.
- * Therefore, if any limited counters are in use, we read them
- * both, and always in the same order, to minimize variability,
- * and do it inside the same asm that writes MMCR0.
- */
-static void write_mmcr0(struct cpu_hw_counters *cpuhw, unsigned long mmcr0)
-{
-	unsigned long pmc5, pmc6;
-
-	if (!cpuhw->n_limited) {
-		mtspr(SPRN_MMCR0, mmcr0);
-		return;
-	}
-
-	/*
-	 * Write MMCR0, then read PMC5 and PMC6 immediately.
-	 * To ensure we don't get a performance monitor interrupt
-	 * between writing MMCR0 and freezing/thawing the limited
-	 * counters, we first write MMCR0 with the counter overflow
-	 * interrupt enable bits turned off.
-	 */
-	asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5"
-		     : "=&r" (pmc5), "=&r" (pmc6)
-		     : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)),
-		       "i" (SPRN_MMCR0),
-		       "i" (SPRN_PMC5), "i" (SPRN_PMC6));
-
-	if (mmcr0 & MMCR0_FC)
-		freeze_limited_counters(cpuhw, pmc5, pmc6);
-	else
-		thaw_limited_counters(cpuhw, pmc5, pmc6);
-
-	/*
-	 * Write the full MMCR0 including the counter overflow interrupt
-	 * enable bits, if necessary.
-	 */
-	if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE))
-		mtspr(SPRN_MMCR0, mmcr0);
-}
-
-/*
- * Disable all counters to prevent PMU interrupts and to allow
- * counters to be added or removed.
- */
-void hw_perf_disable(void)
-{
-	struct cpu_hw_counters *cpuhw;
-	unsigned long flags;
-
-	if (!ppmu)
-		return;
-	local_irq_save(flags);
-	cpuhw = &__get_cpu_var(cpu_hw_counters);
-
-	if (!cpuhw->disabled) {
-		cpuhw->disabled = 1;
-		cpuhw->n_added = 0;
-
-		/*
-		 * Check if we ever enabled the PMU on this cpu.
-		 */
-		if (!cpuhw->pmcs_enabled) {
-			ppc_enable_pmcs();
-			cpuhw->pmcs_enabled = 1;
-		}
-
-		/*
-		 * Disable instruction sampling if it was enabled
-		 */
-		if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
-			mtspr(SPRN_MMCRA,
-			      cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
-			mb();
-		}
-
-		/*
-		 * Set the 'freeze counters' bit.
-		 * The barrier is to make sure the mtspr has been
-		 * executed and the PMU has frozen the counters
-		 * before we return.
-		 */
-		write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC);
-		mb();
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * Re-enable all counters if disable == 0.
- * If we were previously disabled and counters were added, then
- * put the new config on the PMU.
- */
-void hw_perf_enable(void)
-{
-	struct perf_counter *counter;
-	struct cpu_hw_counters *cpuhw;
-	unsigned long flags;
-	long i;
-	unsigned long val;
-	s64 left;
-	unsigned int hwc_index[MAX_HWCOUNTERS];
-	int n_lim;
-	int idx;
-
-	if (!ppmu)
-		return;
-	local_irq_save(flags);
-	cpuhw = &__get_cpu_var(cpu_hw_counters);
-	if (!cpuhw->disabled) {
-		local_irq_restore(flags);
-		return;
-	}
-	cpuhw->disabled = 0;
-
-	/*
-	 * If we didn't change anything, or only removed counters,
-	 * no need to recalculate MMCR* settings and reset the PMCs.
-	 * Just reenable the PMU with the current MMCR* settings
-	 * (possibly updated for removal of counters).
-	 */
-	if (!cpuhw->n_added) {
-		mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
-		mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
-		if (cpuhw->n_counters == 0)
-			ppc_set_pmu_inuse(0);
-		goto out_enable;
-	}
-
-	/*
-	 * Compute MMCR* values for the new set of counters
-	 */
-	if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_counters, hwc_index,
-			       cpuhw->mmcr)) {
-		/* shouldn't ever get here */
-		printk(KERN_ERR "oops compute_mmcr failed\n");
-		goto out;
-	}
-
-	/*
-	 * Add in MMCR0 freeze bits corresponding to the
-	 * attr.exclude_* bits for the first counter.
-	 * We have already checked that all counters have the
-	 * same values for these bits as the first counter.
-	 */
-	counter = cpuhw->counter[0];
-	if (counter->attr.exclude_user)
-		cpuhw->mmcr[0] |= MMCR0_FCP;
-	if (counter->attr.exclude_kernel)
-		cpuhw->mmcr[0] |= freeze_counters_kernel;
-	if (counter->attr.exclude_hv)
-		cpuhw->mmcr[0] |= MMCR0_FCHV;
-
-	/*
-	 * Write the new configuration to MMCR* with the freeze
-	 * bit set and set the hardware counters to their initial values.
-	 * Then unfreeze the counters.
-	 */
-	ppc_set_pmu_inuse(1);
-	mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
-	mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
-	mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
-				| MMCR0_FC);
-
-	/*
-	 * Read off any pre-existing counters that need to move
-	 * to another PMC.
-	 */
-	for (i = 0; i < cpuhw->n_counters; ++i) {
-		counter = cpuhw->counter[i];
-		if (counter->hw.idx && counter->hw.idx != hwc_index[i] + 1) {
-			power_pmu_read(counter);
-			write_pmc(counter->hw.idx, 0);
-			counter->hw.idx = 0;
-		}
-	}
-
-	/*
-	 * Initialize the PMCs for all the new and moved counters.
-	 */
-	cpuhw->n_limited = n_lim = 0;
-	for (i = 0; i < cpuhw->n_counters; ++i) {
-		counter = cpuhw->counter[i];
-		if (counter->hw.idx)
-			continue;
-		idx = hwc_index[i] + 1;
-		if (is_limited_pmc(idx)) {
-			cpuhw->limited_counter[n_lim] = counter;
-			cpuhw->limited_hwidx[n_lim] = idx;
-			++n_lim;
-			continue;
-		}
-		val = 0;
-		if (counter->hw.sample_period) {
-			left = atomic64_read(&counter->hw.period_left);
-			if (left < 0x80000000L)
-				val = 0x80000000L - left;
-		}
-		atomic64_set(&counter->hw.prev_count, val);
-		counter->hw.idx = idx;
-		write_pmc(idx, val);
-		perf_counter_update_userpage(counter);
-	}
-	cpuhw->n_limited = n_lim;
-	cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE;
-
- out_enable:
-	mb();
-	write_mmcr0(cpuhw, cpuhw->mmcr[0]);
-
-	/*
-	 * Enable instruction sampling if necessary
-	 */
-	if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
-		mb();
-		mtspr(SPRN_MMCRA, cpuhw->mmcr[2]);
-	}
-
- out:
-	local_irq_restore(flags);
-}
-
-static int collect_events(struct perf_counter *group, int max_count,
-			  struct perf_counter *ctrs[], u64 *events,
-			  unsigned int *flags)
-{
-	int n = 0;
-	struct perf_counter *counter;
-
-	if (!is_software_counter(group)) {
-		if (n >= max_count)
-			return -1;
-		ctrs[n] = group;
-		flags[n] = group->hw.counter_base;
-		events[n++] = group->hw.config;
-	}
-	list_for_each_entry(counter, &group->sibling_list, list_entry) {
-		if (!is_software_counter(counter) &&
-		    counter->state != PERF_COUNTER_STATE_OFF) {
-			if (n >= max_count)
-				return -1;
-			ctrs[n] = counter;
-			flags[n] = counter->hw.counter_base;
-			events[n++] = counter->hw.config;
-		}
-	}
-	return n;
-}
-
-static void counter_sched_in(struct perf_counter *counter, int cpu)
-{
-	counter->state = PERF_COUNTER_STATE_ACTIVE;
-	counter->oncpu = cpu;
-	counter->tstamp_running += counter->ctx->time - counter->tstamp_stopped;
-	if (is_software_counter(counter))
-		counter->pmu->enable(counter);
-}
-
-/*
- * Called to enable a whole group of counters.
- * Returns 1 if the group was enabled, or -EAGAIN if it could not be.
- * Assumes the caller has disabled interrupts and has
- * frozen the PMU with hw_perf_save_disable.
- */
-int hw_perf_group_sched_in(struct perf_counter *group_leader,
-	       struct perf_cpu_context *cpuctx,
-	       struct perf_counter_context *ctx, int cpu)
-{
-	struct cpu_hw_counters *cpuhw;
-	long i, n, n0;
-	struct perf_counter *sub;
-
-	if (!ppmu)
-		return 0;
-	cpuhw = &__get_cpu_var(cpu_hw_counters);
-	n0 = cpuhw->n_counters;
-	n = collect_events(group_leader, ppmu->n_counter - n0,
-			   &cpuhw->counter[n0], &cpuhw->events[n0],
-			   &cpuhw->flags[n0]);
-	if (n < 0)
-		return -EAGAIN;
-	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n))
-		return -EAGAIN;
-	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
-	if (i < 0)
-		return -EAGAIN;
-	cpuhw->n_counters = n0 + n;
-	cpuhw->n_added += n;
-
-	/*
-	 * OK, this group can go on; update counter states etc.,
-	 * and enable any software counters
-	 */
-	for (i = n0; i < n0 + n; ++i)
-		cpuhw->counter[i]->hw.config = cpuhw->events[i];
-	cpuctx->active_oncpu += n;
-	n = 1;
-	counter_sched_in(group_leader, cpu);
-	list_for_each_entry(sub, &group_leader->sibling_list, list_entry) {
-		if (sub->state != PERF_COUNTER_STATE_OFF) {
-			counter_sched_in(sub, cpu);
-			++n;
-		}
-	}
-	ctx->nr_active += n;
-
-	return 1;
-}
-
-/*
- * Add a counter to the PMU.
- * If all counters are not already frozen, then we disable and
- * re-enable the PMU in order to get hw_perf_enable to do the
- * actual work of reconfiguring the PMU.
- */
-static int power_pmu_enable(struct perf_counter *counter)
-{
-	struct cpu_hw_counters *cpuhw;
-	unsigned long flags;
-	int n0;
-	int ret = -EAGAIN;
-
-	local_irq_save(flags);
-	perf_disable();
-
-	/*
-	 * Add the counter to the list (if there is room)
-	 * and check whether the total set is still feasible.
-	 */
-	cpuhw = &__get_cpu_var(cpu_hw_counters);
-	n0 = cpuhw->n_counters;
-	if (n0 >= ppmu->n_counter)
-		goto out;
-	cpuhw->counter[n0] = counter;
-	cpuhw->events[n0] = counter->hw.config;
-	cpuhw->flags[n0] = counter->hw.counter_base;
-	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1))
-		goto out;
-	if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
-		goto out;
-
-	counter->hw.config = cpuhw->events[n0];
-	++cpuhw->n_counters;
-	++cpuhw->n_added;
-
-	ret = 0;
- out:
-	perf_enable();
-	local_irq_restore(flags);
-	return ret;
-}
-
-/*
- * Remove a counter from the PMU.
- */
-static void power_pmu_disable(struct perf_counter *counter)
-{
-	struct cpu_hw_counters *cpuhw;
-	long i;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	perf_disable();
-
-	power_pmu_read(counter);
-
-	cpuhw = &__get_cpu_var(cpu_hw_counters);
-	for (i = 0; i < cpuhw->n_counters; ++i) {
-		if (counter == cpuhw->counter[i]) {
-			while (++i < cpuhw->n_counters)
-				cpuhw->counter[i-1] = cpuhw->counter[i];
-			--cpuhw->n_counters;
-			ppmu->disable_pmc(counter->hw.idx - 1, cpuhw->mmcr);
-			if (counter->hw.idx) {
-				write_pmc(counter->hw.idx, 0);
-				counter->hw.idx = 0;
-			}
-			perf_counter_update_userpage(counter);
-			break;
-		}
-	}
-	for (i = 0; i < cpuhw->n_limited; ++i)
-		if (counter == cpuhw->limited_counter[i])
-			break;
-	if (i < cpuhw->n_limited) {
-		while (++i < cpuhw->n_limited) {
-			cpuhw->limited_counter[i-1] = cpuhw->limited_counter[i];
-			cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i];
-		}
-		--cpuhw->n_limited;
-	}
-	if (cpuhw->n_counters == 0) {
-		/* disable exceptions if no counters are running */
-		cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE);
-	}
-
-	perf_enable();
-	local_irq_restore(flags);
-}
-
-/*
- * Re-enable interrupts on a counter after they were throttled
- * because they were coming too fast.
- */
-static void power_pmu_unthrottle(struct perf_counter *counter)
-{
-	s64 val, left;
-	unsigned long flags;
-
-	if (!counter->hw.idx || !counter->hw.sample_period)
-		return;
-	local_irq_save(flags);
-	perf_disable();
-	power_pmu_read(counter);
-	left = counter->hw.sample_period;
-	counter->hw.last_period = left;
-	val = 0;
-	if (left < 0x80000000L)
-		val = 0x80000000L - left;
-	write_pmc(counter->hw.idx, val);
-	atomic64_set(&counter->hw.prev_count, val);
-	atomic64_set(&counter->hw.period_left, left);
-	perf_counter_update_userpage(counter);
-	perf_enable();
-	local_irq_restore(flags);
-}
-
-struct pmu power_pmu = {
-	.enable		= power_pmu_enable,
-	.disable	= power_pmu_disable,
-	.read		= power_pmu_read,
-	.unthrottle	= power_pmu_unthrottle,
-};
-
-/*
- * Return 1 if we might be able to put counter on a limited PMC,
- * or 0 if not.
- * A counter can only go on a limited PMC if it counts something
- * that a limited PMC can count, doesn't require interrupts, and
- * doesn't exclude any processor mode.
- */
-static int can_go_on_limited_pmc(struct perf_counter *counter, u64 ev,
-				 unsigned int flags)
-{
-	int n;
-	u64 alt[MAX_EVENT_ALTERNATIVES];
-
-	if (counter->attr.exclude_user
-	    || counter->attr.exclude_kernel
-	    || counter->attr.exclude_hv
-	    || counter->attr.sample_period)
-		return 0;
-
-	if (ppmu->limited_pmc_event(ev))
-		return 1;
-
-	/*
-	 * The requested event isn't on a limited PMC already;
-	 * see if any alternative code goes on a limited PMC.
-	 */
-	if (!ppmu->get_alternatives)
-		return 0;
-
-	flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD;
-	n = ppmu->get_alternatives(ev, flags, alt);
-
-	return n > 0;
-}
-
-/*
- * Find an alternative event that goes on a normal PMC, if possible,
- * and return the event code, or 0 if there is no such alternative.
- * (Note: event code 0 is "don't count" on all machines.)
- */
-static u64 normal_pmc_alternative(u64 ev, unsigned long flags)
-{
-	u64 alt[MAX_EVENT_ALTERNATIVES];
-	int n;
-
-	flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD);
-	n = ppmu->get_alternatives(ev, flags, alt);
-	if (!n)
-		return 0;
-	return alt[0];
-}
-
-/* Number of perf_counters counting hardware events */
-static atomic_t num_counters;
-/* Used to avoid races in calling reserve/release_pmc_hardware */
-static DEFINE_MUTEX(pmc_reserve_mutex);
-
-/*
- * Release the PMU if this is the last perf_counter.
- */
-static void hw_perf_counter_destroy(struct perf_counter *counter)
-{
-	if (!atomic_add_unless(&num_counters, -1, 1)) {
-		mutex_lock(&pmc_reserve_mutex);
-		if (atomic_dec_return(&num_counters) == 0)
-			release_pmc_hardware();
-		mutex_unlock(&pmc_reserve_mutex);
-	}
-}
-
-/*
- * Translate a generic cache event config to a raw event code.
- */
-static int hw_perf_cache_event(u64 config, u64 *eventp)
-{
-	unsigned long type, op, result;
-	int ev;
-
-	if (!ppmu->cache_events)
-		return -EINVAL;
-
-	/* unpack config */
-	type = config & 0xff;
-	op = (config >> 8) & 0xff;
-	result = (config >> 16) & 0xff;
-
-	if (type >= PERF_COUNT_HW_CACHE_MAX ||
-	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
-	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	ev = (*ppmu->cache_events)[type][op][result];
-	if (ev == 0)
-		return -EOPNOTSUPP;
-	if (ev == -1)
-		return -EINVAL;
-	*eventp = ev;
-	return 0;
-}
-
-const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
-{
-	u64 ev;
-	unsigned long flags;
-	struct perf_counter *ctrs[MAX_HWCOUNTERS];
-	u64 events[MAX_HWCOUNTERS];
-	unsigned int cflags[MAX_HWCOUNTERS];
-	int n;
-	int err;
-	struct cpu_hw_counters *cpuhw;
-
-	if (!ppmu)
-		return ERR_PTR(-ENXIO);
-	switch (counter->attr.type) {
-	case PERF_TYPE_HARDWARE:
-		ev = counter->attr.config;
-		if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0)
-			return ERR_PTR(-EOPNOTSUPP);
-		ev = ppmu->generic_events[ev];
-		break;
-	case PERF_TYPE_HW_CACHE:
-		err = hw_perf_cache_event(counter->attr.config, &ev);
-		if (err)
-			return ERR_PTR(err);
-		break;
-	case PERF_TYPE_RAW:
-		ev = counter->attr.config;
-		break;
-	default:
-		return ERR_PTR(-EINVAL);
-	}
-	counter->hw.config_base = ev;
-	counter->hw.idx = 0;
-
-	/*
-	 * If we are not running on a hypervisor, force the
-	 * exclude_hv bit to 0 so that we don't care what
-	 * the user set it to.
-	 */
-	if (!firmware_has_feature(FW_FEATURE_LPAR))
-		counter->attr.exclude_hv = 0;
-
-	/*
-	 * If this is a per-task counter, then we can use
-	 * PM_RUN_* events interchangeably with their non RUN_*
-	 * equivalents, e.g. PM_RUN_CYC instead of PM_CYC.
-	 * XXX we should check if the task is an idle task.
-	 */
-	flags = 0;
-	if (counter->ctx->task)
-		flags |= PPMU_ONLY_COUNT_RUN;
-
-	/*
-	 * If this machine has limited counters, check whether this
-	 * event could go on a limited counter.
-	 */
-	if (ppmu->flags & PPMU_LIMITED_PMC5_6) {
-		if (can_go_on_limited_pmc(counter, ev, flags)) {
-			flags |= PPMU_LIMITED_PMC_OK;
-		} else if (ppmu->limited_pmc_event(ev)) {
-			/*
-			 * The requested event is on a limited PMC,
-			 * but we can't use a limited PMC; see if any
-			 * alternative goes on a normal PMC.
-			 */
-			ev = normal_pmc_alternative(ev, flags);
-			if (!ev)
-				return ERR_PTR(-EINVAL);
-		}
-	}
-
-	/*
-	 * If this is in a group, check if it can go on with all the
-	 * other hardware counters in the group.  We assume the counter
-	 * hasn't been linked into its leader's sibling list at this point.
-	 */
-	n = 0;
-	if (counter->group_leader != counter) {
-		n = collect_events(counter->group_leader, ppmu->n_counter - 1,
-				   ctrs, events, cflags);
-		if (n < 0)
-			return ERR_PTR(-EINVAL);
-	}
-	events[n] = ev;
-	ctrs[n] = counter;
-	cflags[n] = flags;
-	if (check_excludes(ctrs, cflags, n, 1))
-		return ERR_PTR(-EINVAL);
-
-	cpuhw = &get_cpu_var(cpu_hw_counters);
-	err = power_check_constraints(cpuhw, events, cflags, n + 1);
-	put_cpu_var(cpu_hw_counters);
-	if (err)
-		return ERR_PTR(-EINVAL);
-
-	counter->hw.config = events[n];
-	counter->hw.counter_base = cflags[n];
-	counter->hw.last_period = counter->hw.sample_period;
-	atomic64_set(&counter->hw.period_left, counter->hw.last_period);
-
-	/*
-	 * See if we need to reserve the PMU.
-	 * If no counters are currently in use, then we have to take a
-	 * mutex to ensure that we don't race with another task doing
-	 * reserve_pmc_hardware or release_pmc_hardware.
-	 */
-	err = 0;
-	if (!atomic_inc_not_zero(&num_counters)) {
-		mutex_lock(&pmc_reserve_mutex);
-		if (atomic_read(&num_counters) == 0 &&
-		    reserve_pmc_hardware(perf_counter_interrupt))
-			err = -EBUSY;
-		else
-			atomic_inc(&num_counters);
-		mutex_unlock(&pmc_reserve_mutex);
-	}
-	counter->destroy = hw_perf_counter_destroy;
-
-	if (err)
-		return ERR_PTR(err);
-	return &power_pmu;
-}
-
-/*
- * A counter has overflowed; update its count and record
- * things if requested.  Note that interrupts are hard-disabled
- * here so there is no possibility of being interrupted.
- */
-static void record_and_restart(struct perf_counter *counter, unsigned long val,
-			       struct pt_regs *regs, int nmi)
-{
-	u64 period = counter->hw.sample_period;
-	s64 prev, delta, left;
-	int record = 0;
-
-	/* we don't have to worry about interrupts here */
-	prev = atomic64_read(&counter->hw.prev_count);
-	delta = (val - prev) & 0xfffffffful;
-	atomic64_add(delta, &counter->count);
-
-	/*
-	 * See if the total period for this counter has expired,
-	 * and update for the next period.
-	 */
-	val = 0;
-	left = atomic64_read(&counter->hw.period_left) - delta;
-	if (period) {
-		if (left <= 0) {
-			left += period;
-			if (left <= 0)
-				left = period;
-			record = 1;
-		}
-		if (left < 0x80000000LL)
-			val = 0x80000000LL - left;
-	}
-
-	/*
-	 * Finally record data if requested.
-	 */
-	if (record) {
-		struct perf_sample_data data = {
-			.addr	= 0,
-			.period	= counter->hw.last_period,
-		};
-
-		if (counter->attr.sample_type & PERF_SAMPLE_ADDR)
-			perf_get_data_addr(regs, &data.addr);
-
-		if (perf_counter_overflow(counter, nmi, &data, regs)) {
-			/*
-			 * Interrupts are coming too fast - throttle them
-			 * by setting the counter to 0, so it will be
-			 * at least 2^30 cycles until the next interrupt
-			 * (assuming each counter counts at most 2 counts
-			 * per cycle).
-			 */
-			val = 0;
-			left = ~0ULL >> 1;
-		}
-	}
-
-	write_pmc(counter->hw.idx, val);
-	atomic64_set(&counter->hw.prev_count, val);
-	atomic64_set(&counter->hw.period_left, left);
-	perf_counter_update_userpage(counter);
-}
-
-/*
- * Called from generic code to get the misc flags (i.e. processor mode)
- * for an event.
- */
-unsigned long perf_misc_flags(struct pt_regs *regs)
-{
-	u32 flags = perf_get_misc_flags(regs);
-
-	if (flags)
-		return flags;
-	return user_mode(regs) ? PERF_EVENT_MISC_USER :
-		PERF_EVENT_MISC_KERNEL;
-}
-
-/*
- * Called from generic code to get the instruction pointer
- * for an event.
- */
-unsigned long perf_instruction_pointer(struct pt_regs *regs)
-{
-	unsigned long ip;
-
-	if (TRAP(regs) != 0xf00)
-		return regs->nip;	/* not a PMU interrupt */
-
-	ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
-	return ip;
-}
-
-/*
- * Performance monitor interrupt stuff
- */
-static void perf_counter_interrupt(struct pt_regs *regs)
-{
-	int i;
-	struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters);
-	struct perf_counter *counter;
-	unsigned long val;
-	int found = 0;
-	int nmi;
-
-	if (cpuhw->n_limited)
-		freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5),
-					mfspr(SPRN_PMC6));
-
-	perf_read_regs(regs);
-
-	nmi = perf_intr_is_nmi(regs);
-	if (nmi)
-		nmi_enter();
-	else
-		irq_enter();
-
-	for (i = 0; i < cpuhw->n_counters; ++i) {
-		counter = cpuhw->counter[i];
-		if (!counter->hw.idx || is_limited_pmc(counter->hw.idx))
-			continue;
-		val = read_pmc(counter->hw.idx);
-		if ((int)val < 0) {
-			/* counter has overflowed */
-			found = 1;
-			record_and_restart(counter, val, regs, nmi);
-		}
-	}
-
-	/*
-	 * In case we didn't find and reset the counter that caused
-	 * the interrupt, scan all counters and reset any that are
-	 * negative, to avoid getting continual interrupts.
-	 * Any that we processed in the previous loop will not be negative.
-	 */
-	if (!found) {
-		for (i = 0; i < ppmu->n_counter; ++i) {
-			if (is_limited_pmc(i + 1))
-				continue;
-			val = read_pmc(i + 1);
-			if ((int)val < 0)
-				write_pmc(i + 1, 0);
-		}
-	}
-
-	/*
-	 * Reset MMCR0 to its normal value.  This will set PMXE and
-	 * clear FC (freeze counters) and PMAO (perf mon alert occurred)
-	 * and thus allow interrupts to occur again.
-	 * XXX might want to use MSR.PM to keep the counters frozen until
-	 * we get back out of this interrupt.
-	 */
-	write_mmcr0(cpuhw, cpuhw->mmcr[0]);
-
-	if (nmi)
-		nmi_exit();
-	else
-		irq_exit();
-}
-
-void hw_perf_counter_setup(int cpu)
-{
-	struct cpu_hw_counters *cpuhw = &per_cpu(cpu_hw_counters, cpu);
-
-	if (!ppmu)
-		return;
-	memset(cpuhw, 0, sizeof(*cpuhw));
-	cpuhw->mmcr[0] = MMCR0_FC;
-}
-
-int register_power_pmu(struct power_pmu *pmu)
-{
-	if (ppmu)
-		return -EBUSY;		/* something's already registered */
-
-	ppmu = pmu;
-	pr_info("%s performance monitor hardware support registered\n",
-		pmu->name);
-
-#ifdef MSR_HV
-	/*
-	 * Use FCHV to ignore kernel events if MSR.HV is set.
-	 */
-	if (mfmsr() & MSR_HV)
-		freeze_counters_kernel = MMCR0_FCHV;
-#endif /* CONFIG_PPC64 */
-
-	return 0;
-}
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
new file mode 100644
index 00000000000..c98321fcb45
--- /dev/null
+++ b/arch/powerpc/kernel/perf_event.c
@@ -0,0 +1,1315 @@
+/*
+ * Performance event support - powerpc architecture code
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <linux/hardirq.h>
+#include <asm/reg.h>
+#include <asm/pmc.h>
+#include <asm/machdep.h>
+#include <asm/firmware.h>
+#include <asm/ptrace.h>
+
+struct cpu_hw_events {
+	int n_events;
+	int n_percpu;
+	int disabled;
+	int n_added;
+	int n_limited;
+	u8  pmcs_enabled;
+	struct perf_event *event[MAX_HWEVENTS];
+	u64 events[MAX_HWEVENTS];
+	unsigned int flags[MAX_HWEVENTS];
+	unsigned long mmcr[3];
+	struct perf_event *limited_event[MAX_LIMITED_HWEVENTS];
+	u8  limited_hwidx[MAX_LIMITED_HWEVENTS];
+	u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+	unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+	unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+struct power_pmu *ppmu;
+
+/*
+ * Normally, to ignore kernel events we set the FCS (freeze events
+ * in supervisor mode) bit in MMCR0, but if the kernel runs with the
+ * hypervisor bit set in the MSR, or if we are running on a processor
+ * where the hypervisor bit is forced to 1 (as on Apple G5 processors),
+ * then we need to use the FCHV bit to ignore kernel events.
+ */
+static unsigned int freeze_events_kernel = MMCR0_FCS;
+
+/*
+ * 32-bit doesn't have MMCRA but does have an MMCR2,
+ * and a few other names are different.
+ */
+#ifdef CONFIG_PPC32
+
+#define MMCR0_FCHV		0
+#define MMCR0_PMCjCE		MMCR0_PMCnCE
+
+#define SPRN_MMCRA		SPRN_MMCR2
+#define MMCRA_SAMPLE_ENABLE	0
+
+static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
+{
+	return 0;
+}
+static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
+static inline u32 perf_get_misc_flags(struct pt_regs *regs)
+{
+	return 0;
+}
+static inline void perf_read_regs(struct pt_regs *regs) { }
+static inline int perf_intr_is_nmi(struct pt_regs *regs)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PPC32 */
+
+/*
+ * Things that are specific to 64-bit implementations.
+ */
+#ifdef CONFIG_PPC64
+
+static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
+{
+	unsigned long mmcra = regs->dsisr;
+
+	if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) {
+		unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT;
+		if (slot > 1)
+			return 4 * (slot - 1);
+	}
+	return 0;
+}
+
+/*
+ * The user wants a data address recorded.
+ * If we're not doing instruction sampling, give them the SDAR
+ * (sampled data address).  If we are doing instruction sampling, then
+ * only give them the SDAR if it corresponds to the instruction
+ * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC
+ * bit in MMCRA.
+ */
+static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
+{
+	unsigned long mmcra = regs->dsisr;
+	unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
+		POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
+
+	if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
+		*addrp = mfspr(SPRN_SDAR);
+}
+
+static inline u32 perf_get_misc_flags(struct pt_regs *regs)
+{
+	unsigned long mmcra = regs->dsisr;
+
+	if (TRAP(regs) != 0xf00)
+		return 0;	/* not a PMU interrupt */
+
+	if (ppmu->flags & PPMU_ALT_SIPR) {
+		if (mmcra & POWER6_MMCRA_SIHV)
+			return PERF_RECORD_MISC_HYPERVISOR;
+		return (mmcra & POWER6_MMCRA_SIPR) ?
+			PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL;
+	}
+	if (mmcra & MMCRA_SIHV)
+		return PERF_RECORD_MISC_HYPERVISOR;
+	return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER :
+		PERF_RECORD_MISC_KERNEL;
+}
+
+/*
+ * Overload regs->dsisr to store MMCRA so we only need to read it once
+ * on each interrupt.
+ */
+static inline void perf_read_regs(struct pt_regs *regs)
+{
+	regs->dsisr = mfspr(SPRN_MMCRA);
+}
+
+/*
+ * If interrupts were soft-disabled when a PMU interrupt occurs, treat
+ * it as an NMI.
+ */
+static inline int perf_intr_is_nmi(struct pt_regs *regs)
+{
+	return !regs->softe;
+}
+
+#endif /* CONFIG_PPC64 */
+
+static void perf_event_interrupt(struct pt_regs *regs);
+
+void perf_event_print_debug(void)
+{
+}
+
+/*
+ * Read one performance monitor event (PMC).
+ */
+static unsigned long read_pmc(int idx)
+{
+	unsigned long val;
+
+	switch (idx) {
+	case 1:
+		val = mfspr(SPRN_PMC1);
+		break;
+	case 2:
+		val = mfspr(SPRN_PMC2);
+		break;
+	case 3:
+		val = mfspr(SPRN_PMC3);
+		break;
+	case 4:
+		val = mfspr(SPRN_PMC4);
+		break;
+	case 5:
+		val = mfspr(SPRN_PMC5);
+		break;
+	case 6:
+		val = mfspr(SPRN_PMC6);
+		break;
+#ifdef CONFIG_PPC64
+	case 7:
+		val = mfspr(SPRN_PMC7);
+		break;
+	case 8:
+		val = mfspr(SPRN_PMC8);
+		break;
+#endif /* CONFIG_PPC64 */
+	default:
+		printk(KERN_ERR "oops trying to read PMC%d\n", idx);
+		val = 0;
+	}
+	return val;
+}
+
+/*
+ * Write one PMC.
+ */
+static void write_pmc(int idx, unsigned long val)
+{
+	switch (idx) {
+	case 1:
+		mtspr(SPRN_PMC1, val);
+		break;
+	case 2:
+		mtspr(SPRN_PMC2, val);
+		break;
+	case 3:
+		mtspr(SPRN_PMC3, val);
+		break;
+	case 4:
+		mtspr(SPRN_PMC4, val);
+		break;
+	case 5:
+		mtspr(SPRN_PMC5, val);
+		break;
+	case 6:
+		mtspr(SPRN_PMC6, val);
+		break;
+#ifdef CONFIG_PPC64
+	case 7:
+		mtspr(SPRN_PMC7, val);
+		break;
+	case 8:
+		mtspr(SPRN_PMC8, val);
+		break;
+#endif /* CONFIG_PPC64 */
+	default:
+		printk(KERN_ERR "oops trying to write PMC%d\n", idx);
+	}
+}
+
+/*
+ * Check if a set of events can all go on the PMU at once.
+ * If they can't, this will look at alternative codes for the events
+ * and see if any combination of alternative codes is feasible.
+ * The feasible set is returned in event_id[].
+ */
+static int power_check_constraints(struct cpu_hw_events *cpuhw,
+				   u64 event_id[], unsigned int cflags[],
+				   int n_ev)
+{
+	unsigned long mask, value, nv;
+	unsigned long smasks[MAX_HWEVENTS], svalues[MAX_HWEVENTS];
+	int n_alt[MAX_HWEVENTS], choice[MAX_HWEVENTS];
+	int i, j;
+	unsigned long addf = ppmu->add_fields;
+	unsigned long tadd = ppmu->test_adder;
+
+	if (n_ev > ppmu->n_event)
+		return -1;
+
+	/* First see if the events will go on as-is */
+	for (i = 0; i < n_ev; ++i) {
+		if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
+		    && !ppmu->limited_pmc_event(event_id[i])) {
+			ppmu->get_alternatives(event_id[i], cflags[i],
+					       cpuhw->alternatives[i]);
+			event_id[i] = cpuhw->alternatives[i][0];
+		}
+		if (ppmu->get_constraint(event_id[i], &cpuhw->amasks[i][0],
+					 &cpuhw->avalues[i][0]))
+			return -1;
+	}
+	value = mask = 0;
+	for (i = 0; i < n_ev; ++i) {
+		nv = (value | cpuhw->avalues[i][0]) +
+			(value & cpuhw->avalues[i][0] & addf);
+		if ((((nv + tadd) ^ value) & mask) != 0 ||
+		    (((nv + tadd) ^ cpuhw->avalues[i][0]) &
+		     cpuhw->amasks[i][0]) != 0)
+			break;
+		value = nv;
+		mask |= cpuhw->amasks[i][0];
+	}
+	if (i == n_ev)
+		return 0;	/* all OK */
+
+	/* doesn't work, gather alternatives... */
+	if (!ppmu->get_alternatives)
+		return -1;
+	for (i = 0; i < n_ev; ++i) {
+		choice[i] = 0;
+		n_alt[i] = ppmu->get_alternatives(event_id[i], cflags[i],
+						  cpuhw->alternatives[i]);
+		for (j = 1; j < n_alt[i]; ++j)
+			ppmu->get_constraint(cpuhw->alternatives[i][j],
+					     &cpuhw->amasks[i][j],
+					     &cpuhw->avalues[i][j]);
+	}
+
+	/* enumerate all possibilities and see if any will work */
+	i = 0;
+	j = -1;
+	value = mask = nv = 0;
+	while (i < n_ev) {
+		if (j >= 0) {
+			/* we're backtracking, restore context */
+			value = svalues[i];
+			mask = smasks[i];
+			j = choice[i];
+		}
+		/*
+		 * See if any alternative k for event_id i,
+		 * where k > j, will satisfy the constraints.
+		 */
+		while (++j < n_alt[i]) {
+			nv = (value | cpuhw->avalues[i][j]) +
+				(value & cpuhw->avalues[i][j] & addf);
+			if ((((nv + tadd) ^ value) & mask) == 0 &&
+			    (((nv + tadd) ^ cpuhw->avalues[i][j])
+			     & cpuhw->amasks[i][j]) == 0)
+				break;
+		}
+		if (j >= n_alt[i]) {
+			/*
+			 * No feasible alternative, backtrack
+			 * to event_id i-1 and continue enumerating its
+			 * alternatives from where we got up to.
+			 */
+			if (--i < 0)
+				return -1;
+		} else {
+			/*
+			 * Found a feasible alternative for event_id i,
+			 * remember where we got up to with this event_id,
+			 * go on to the next event_id, and start with
+			 * the first alternative for it.
+			 */
+			choice[i] = j;
+			svalues[i] = value;
+			smasks[i] = mask;
+			value = nv;
+			mask |= cpuhw->amasks[i][j];
+			++i;
+			j = -1;
+		}
+	}
+
+	/* OK, we have a feasible combination, tell the caller the solution */
+	for (i = 0; i < n_ev; ++i)
+		event_id[i] = cpuhw->alternatives[i][choice[i]];
+	return 0;
+}
+
+/*
+ * Check if newly-added events have consistent settings for
+ * exclude_{user,kernel,hv} with each other and any previously
+ * added events.
+ */
+static int check_excludes(struct perf_event **ctrs, unsigned int cflags[],
+			  int n_prev, int n_new)
+{
+	int eu = 0, ek = 0, eh = 0;
+	int i, n, first;
+	struct perf_event *event;
+
+	n = n_prev + n_new;
+	if (n <= 1)
+		return 0;
+
+	first = 1;
+	for (i = 0; i < n; ++i) {
+		if (cflags[i] & PPMU_LIMITED_PMC_OK) {
+			cflags[i] &= ~PPMU_LIMITED_PMC_REQD;
+			continue;
+		}
+		event = ctrs[i];
+		if (first) {
+			eu = event->attr.exclude_user;
+			ek = event->attr.exclude_kernel;
+			eh = event->attr.exclude_hv;
+			first = 0;
+		} else if (event->attr.exclude_user != eu ||
+			   event->attr.exclude_kernel != ek ||
+			   event->attr.exclude_hv != eh) {
+			return -EAGAIN;
+		}
+	}
+
+	if (eu || ek || eh)
+		for (i = 0; i < n; ++i)
+			if (cflags[i] & PPMU_LIMITED_PMC_OK)
+				cflags[i] |= PPMU_LIMITED_PMC_REQD;
+
+	return 0;
+}
+
+static void power_pmu_read(struct perf_event *event)
+{
+	s64 val, delta, prev;
+
+	if (!event->hw.idx)
+		return;
+	/*
+	 * Performance monitor interrupts come even when interrupts
+	 * are soft-disabled, as long as interrupts are hard-enabled.
+	 * Therefore we treat them like NMIs.
+	 */
+	do {
+		prev = atomic64_read(&event->hw.prev_count);
+		barrier();
+		val = read_pmc(event->hw.idx);
+	} while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+
+	/* The events are only 32 bits wide */
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &event->hw.period_left);
+}
+
+/*
+ * On some machines, PMC5 and PMC6 can't be written, don't respect
+ * the freeze conditions, and don't generate interrupts.  This tells
+ * us if `event' is using such a PMC.
+ */
+static int is_limited_pmc(int pmcnum)
+{
+	return (ppmu->flags & PPMU_LIMITED_PMC5_6)
+		&& (pmcnum == 5 || pmcnum == 6);
+}
+
+static void freeze_limited_events(struct cpu_hw_events *cpuhw,
+				    unsigned long pmc5, unsigned long pmc6)
+{
+	struct perf_event *event;
+	u64 val, prev, delta;
+	int i;
+
+	for (i = 0; i < cpuhw->n_limited; ++i) {
+		event = cpuhw->limited_event[i];
+		if (!event->hw.idx)
+			continue;
+		val = (event->hw.idx == 5) ? pmc5 : pmc6;
+		prev = atomic64_read(&event->hw.prev_count);
+		event->hw.idx = 0;
+		delta = (val - prev) & 0xfffffffful;
+		atomic64_add(delta, &event->count);
+	}
+}
+
+static void thaw_limited_events(struct cpu_hw_events *cpuhw,
+				  unsigned long pmc5, unsigned long pmc6)
+{
+	struct perf_event *event;
+	u64 val;
+	int i;
+
+	for (i = 0; i < cpuhw->n_limited; ++i) {
+		event = cpuhw->limited_event[i];
+		event->hw.idx = cpuhw->limited_hwidx[i];
+		val = (event->hw.idx == 5) ? pmc5 : pmc6;
+		atomic64_set(&event->hw.prev_count, val);
+		perf_event_update_userpage(event);
+	}
+}
+
+/*
+ * Since limited events don't respect the freeze conditions, we
+ * have to read them immediately after freezing or unfreezing the
+ * other events.  We try to keep the values from the limited
+ * events as consistent as possible by keeping the delay (in
+ * cycles and instructions) between freezing/unfreezing and reading
+ * the limited events as small and consistent as possible.
+ * Therefore, if any limited events are in use, we read them
+ * both, and always in the same order, to minimize variability,
+ * and do it inside the same asm that writes MMCR0.
+ */
+static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0)
+{
+	unsigned long pmc5, pmc6;
+
+	if (!cpuhw->n_limited) {
+		mtspr(SPRN_MMCR0, mmcr0);
+		return;
+	}
+
+	/*
+	 * Write MMCR0, then read PMC5 and PMC6 immediately.
+	 * To ensure we don't get a performance monitor interrupt
+	 * between writing MMCR0 and freezing/thawing the limited
+	 * events, we first write MMCR0 with the event overflow
+	 * interrupt enable bits turned off.
+	 */
+	asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5"
+		     : "=&r" (pmc5), "=&r" (pmc6)
+		     : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)),
+		       "i" (SPRN_MMCR0),
+		       "i" (SPRN_PMC5), "i" (SPRN_PMC6));
+
+	if (mmcr0 & MMCR0_FC)
+		freeze_limited_events(cpuhw, pmc5, pmc6);
+	else
+		thaw_limited_events(cpuhw, pmc5, pmc6);
+
+	/*
+	 * Write the full MMCR0 including the event overflow interrupt
+	 * enable bits, if necessary.
+	 */
+	if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE))
+		mtspr(SPRN_MMCR0, mmcr0);
+}
+
+/*
+ * Disable all events to prevent PMU interrupts and to allow
+ * events to be added or removed.
+ */
+void hw_perf_disable(void)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+
+	if (!ppmu)
+		return;
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuhw->disabled) {
+		cpuhw->disabled = 1;
+		cpuhw->n_added = 0;
+
+		/*
+		 * Check if we ever enabled the PMU on this cpu.
+		 */
+		if (!cpuhw->pmcs_enabled) {
+			ppc_enable_pmcs();
+			cpuhw->pmcs_enabled = 1;
+		}
+
+		/*
+		 * Disable instruction sampling if it was enabled
+		 */
+		if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+			mtspr(SPRN_MMCRA,
+			      cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+			mb();
+		}
+
+		/*
+		 * Set the 'freeze events' bit.
+		 * The barrier is to make sure the mtspr has been
+		 * executed and the PMU has frozen the events
+		 * before we return.
+		 */
+		write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC);
+		mb();
+	}
+	local_irq_restore(flags);
+}
+
+/*
+ * Re-enable all events if disable == 0.
+ * If we were previously disabled and events were added, then
+ * put the new config on the PMU.
+ */
+void hw_perf_enable(void)
+{
+	struct perf_event *event;
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+	long i;
+	unsigned long val;
+	s64 left;
+	unsigned int hwc_index[MAX_HWEVENTS];
+	int n_lim;
+	int idx;
+
+	if (!ppmu)
+		return;
+	local_irq_save(flags);
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	if (!cpuhw->disabled) {
+		local_irq_restore(flags);
+		return;
+	}
+	cpuhw->disabled = 0;
+
+	/*
+	 * If we didn't change anything, or only removed events,
+	 * no need to recalculate MMCR* settings and reset the PMCs.
+	 * Just reenable the PMU with the current MMCR* settings
+	 * (possibly updated for removal of events).
+	 */
+	if (!cpuhw->n_added) {
+		mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+		mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
+		if (cpuhw->n_events == 0)
+			ppc_set_pmu_inuse(0);
+		goto out_enable;
+	}
+
+	/*
+	 * Compute MMCR* values for the new set of events
+	 */
+	if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_events, hwc_index,
+			       cpuhw->mmcr)) {
+		/* shouldn't ever get here */
+		printk(KERN_ERR "oops compute_mmcr failed\n");
+		goto out;
+	}
+
+	/*
+	 * Add in MMCR0 freeze bits corresponding to the
+	 * attr.exclude_* bits for the first event.
+	 * We have already checked that all events have the
+	 * same values for these bits as the first event.
+	 */
+	event = cpuhw->event[0];
+	if (event->attr.exclude_user)
+		cpuhw->mmcr[0] |= MMCR0_FCP;
+	if (event->attr.exclude_kernel)
+		cpuhw->mmcr[0] |= freeze_events_kernel;
+	if (event->attr.exclude_hv)
+		cpuhw->mmcr[0] |= MMCR0_FCHV;
+
+	/*
+	 * Write the new configuration to MMCR* with the freeze
+	 * bit set and set the hardware events to their initial values.
+	 * Then unfreeze the events.
+	 */
+	ppc_set_pmu_inuse(1);
+	mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+	mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
+	mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
+				| MMCR0_FC);
+
+	/*
+	 * Read off any pre-existing events that need to move
+	 * to another PMC.
+	 */
+	for (i = 0; i < cpuhw->n_events; ++i) {
+		event = cpuhw->event[i];
+		if (event->hw.idx && event->hw.idx != hwc_index[i] + 1) {
+			power_pmu_read(event);
+			write_pmc(event->hw.idx, 0);
+			event->hw.idx = 0;
+		}
+	}
+
+	/*
+	 * Initialize the PMCs for all the new and moved events.
+	 */
+	cpuhw->n_limited = n_lim = 0;
+	for (i = 0; i < cpuhw->n_events; ++i) {
+		event = cpuhw->event[i];
+		if (event->hw.idx)
+			continue;
+		idx = hwc_index[i] + 1;
+		if (is_limited_pmc(idx)) {
+			cpuhw->limited_event[n_lim] = event;
+			cpuhw->limited_hwidx[n_lim] = idx;
+			++n_lim;
+			continue;
+		}
+		val = 0;
+		if (event->hw.sample_period) {
+			left = atomic64_read(&event->hw.period_left);
+			if (left < 0x80000000L)
+				val = 0x80000000L - left;
+		}
+		atomic64_set(&event->hw.prev_count, val);
+		event->hw.idx = idx;
+		write_pmc(idx, val);
+		perf_event_update_userpage(event);
+	}
+	cpuhw->n_limited = n_lim;
+	cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE;
+
+ out_enable:
+	mb();
+	write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+
+	/*
+	 * Enable instruction sampling if necessary
+	 */
+	if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+		mb();
+		mtspr(SPRN_MMCRA, cpuhw->mmcr[2]);
+	}
+
+ out:
+	local_irq_restore(flags);
+}
+
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *ctrs[], u64 *events,
+			  unsigned int *flags)
+{
+	int n = 0;
+	struct perf_event *event;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		ctrs[n] = group;
+		flags[n] = group->hw.event_base;
+		events[n++] = group->hw.config;
+	}
+	list_for_each_entry(event, &group->sibling_list, list_entry) {
+		if (!is_software_event(event) &&
+		    event->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			ctrs[n] = event;
+			flags[n] = event->hw.event_base;
+			events[n++] = event->hw.config;
+		}
+	}
+	return n;
+}
+
+static void event_sched_in(struct perf_event *event, int cpu)
+{
+	event->state = PERF_EVENT_STATE_ACTIVE;
+	event->oncpu = cpu;
+	event->tstamp_running += event->ctx->time - event->tstamp_stopped;
+	if (is_software_event(event))
+		event->pmu->enable(event);
+}
+
+/*
+ * Called to enable a whole group of events.
+ * Returns 1 if the group was enabled, or -EAGAIN if it could not be.
+ * Assumes the caller has disabled interrupts and has
+ * frozen the PMU with hw_perf_save_disable.
+ */
+int hw_perf_group_sched_in(struct perf_event *group_leader,
+	       struct perf_cpu_context *cpuctx,
+	       struct perf_event_context *ctx, int cpu)
+{
+	struct cpu_hw_events *cpuhw;
+	long i, n, n0;
+	struct perf_event *sub;
+
+	if (!ppmu)
+		return 0;
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	n0 = cpuhw->n_events;
+	n = collect_events(group_leader, ppmu->n_event - n0,
+			   &cpuhw->event[n0], &cpuhw->events[n0],
+			   &cpuhw->flags[n0]);
+	if (n < 0)
+		return -EAGAIN;
+	if (check_excludes(cpuhw->event, cpuhw->flags, n0, n))
+		return -EAGAIN;
+	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
+	if (i < 0)
+		return -EAGAIN;
+	cpuhw->n_events = n0 + n;
+	cpuhw->n_added += n;
+
+	/*
+	 * OK, this group can go on; update event states etc.,
+	 * and enable any software events
+	 */
+	for (i = n0; i < n0 + n; ++i)
+		cpuhw->event[i]->hw.config = cpuhw->events[i];
+	cpuctx->active_oncpu += n;
+	n = 1;
+	event_sched_in(group_leader, cpu);
+	list_for_each_entry(sub, &group_leader->sibling_list, list_entry) {
+		if (sub->state != PERF_EVENT_STATE_OFF) {
+			event_sched_in(sub, cpu);
+			++n;
+		}
+	}
+	ctx->nr_active += n;
+
+	return 1;
+}
+
+/*
+ * Add a event to the PMU.
+ * If all events are not already frozen, then we disable and
+ * re-enable the PMU in order to get hw_perf_enable to do the
+ * actual work of reconfiguring the PMU.
+ */
+static int power_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	unsigned long flags;
+	int n0;
+	int ret = -EAGAIN;
+
+	local_irq_save(flags);
+	perf_disable();
+
+	/*
+	 * Add the event to the list (if there is room)
+	 * and check whether the total set is still feasible.
+	 */
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	n0 = cpuhw->n_events;
+	if (n0 >= ppmu->n_event)
+		goto out;
+	cpuhw->event[n0] = event;
+	cpuhw->events[n0] = event->hw.config;
+	cpuhw->flags[n0] = event->hw.event_base;
+	if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1))
+		goto out;
+	if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
+		goto out;
+
+	event->hw.config = cpuhw->events[n0];
+	++cpuhw->n_events;
+	++cpuhw->n_added;
+
+	ret = 0;
+ out:
+	perf_enable();
+	local_irq_restore(flags);
+	return ret;
+}
+
+/*
+ * Remove a event from the PMU.
+ */
+static void power_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuhw;
+	long i;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	perf_disable();
+
+	power_pmu_read(event);
+
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	for (i = 0; i < cpuhw->n_events; ++i) {
+		if (event == cpuhw->event[i]) {
+			while (++i < cpuhw->n_events)
+				cpuhw->event[i-1] = cpuhw->event[i];
+			--cpuhw->n_events;
+			ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
+			if (event->hw.idx) {
+				write_pmc(event->hw.idx, 0);
+				event->hw.idx = 0;
+			}
+			perf_event_update_userpage(event);
+			break;
+		}
+	}
+	for (i = 0; i < cpuhw->n_limited; ++i)
+		if (event == cpuhw->limited_event[i])
+			break;
+	if (i < cpuhw->n_limited) {
+		while (++i < cpuhw->n_limited) {
+			cpuhw->limited_event[i-1] = cpuhw->limited_event[i];
+			cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i];
+		}
+		--cpuhw->n_limited;
+	}
+	if (cpuhw->n_events == 0) {
+		/* disable exceptions if no events are running */
+		cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE);
+	}
+
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+/*
+ * Re-enable interrupts on a event after they were throttled
+ * because they were coming too fast.
+ */
+static void power_pmu_unthrottle(struct perf_event *event)
+{
+	s64 val, left;
+	unsigned long flags;
+
+	if (!event->hw.idx || !event->hw.sample_period)
+		return;
+	local_irq_save(flags);
+	perf_disable();
+	power_pmu_read(event);
+	left = event->hw.sample_period;
+	event->hw.last_period = left;
+	val = 0;
+	if (left < 0x80000000L)
+		val = 0x80000000L - left;
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+	perf_enable();
+	local_irq_restore(flags);
+}
+
+struct pmu power_pmu = {
+	.enable		= power_pmu_enable,
+	.disable	= power_pmu_disable,
+	.read		= power_pmu_read,
+	.unthrottle	= power_pmu_unthrottle,
+};
+
+/*
+ * Return 1 if we might be able to put event on a limited PMC,
+ * or 0 if not.
+ * A event can only go on a limited PMC if it counts something
+ * that a limited PMC can count, doesn't require interrupts, and
+ * doesn't exclude any processor mode.
+ */
+static int can_go_on_limited_pmc(struct perf_event *event, u64 ev,
+				 unsigned int flags)
+{
+	int n;
+	u64 alt[MAX_EVENT_ALTERNATIVES];
+
+	if (event->attr.exclude_user
+	    || event->attr.exclude_kernel
+	    || event->attr.exclude_hv
+	    || event->attr.sample_period)
+		return 0;
+
+	if (ppmu->limited_pmc_event(ev))
+		return 1;
+
+	/*
+	 * The requested event_id isn't on a limited PMC already;
+	 * see if any alternative code goes on a limited PMC.
+	 */
+	if (!ppmu->get_alternatives)
+		return 0;
+
+	flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD;
+	n = ppmu->get_alternatives(ev, flags, alt);
+
+	return n > 0;
+}
+
+/*
+ * Find an alternative event_id that goes on a normal PMC, if possible,
+ * and return the event_id code, or 0 if there is no such alternative.
+ * (Note: event_id code 0 is "don't count" on all machines.)
+ */
+static u64 normal_pmc_alternative(u64 ev, unsigned long flags)
+{
+	u64 alt[MAX_EVENT_ALTERNATIVES];
+	int n;
+
+	flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD);
+	n = ppmu->get_alternatives(ev, flags, alt);
+	if (!n)
+		return 0;
+	return alt[0];
+}
+
+/* Number of perf_events counting hardware events */
+static atomic_t num_events;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * Release the PMU if this is the last perf_event.
+ */
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (!atomic_add_unless(&num_events, -1, 1)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_dec_return(&num_events) == 0)
+			release_pmc_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+/*
+ * Translate a generic cache event_id config to a raw event_id code.
+ */
+static int hw_perf_cache_event(u64 config, u64 *eventp)
+{
+	unsigned long type, op, result;
+	int ev;
+
+	if (!ppmu->cache_events)
+		return -EINVAL;
+
+	/* unpack config */
+	type = config & 0xff;
+	op = (config >> 8) & 0xff;
+	result = (config >> 16) & 0xff;
+
+	if (type >= PERF_COUNT_HW_CACHE_MAX ||
+	    op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+	    result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	ev = (*ppmu->cache_events)[type][op][result];
+	if (ev == 0)
+		return -EOPNOTSUPP;
+	if (ev == -1)
+		return -EINVAL;
+	*eventp = ev;
+	return 0;
+}
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	u64 ev;
+	unsigned long flags;
+	struct perf_event *ctrs[MAX_HWEVENTS];
+	u64 events[MAX_HWEVENTS];
+	unsigned int cflags[MAX_HWEVENTS];
+	int n;
+	int err;
+	struct cpu_hw_events *cpuhw;
+
+	if (!ppmu)
+		return ERR_PTR(-ENXIO);
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		ev = event->attr.config;
+		if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0)
+			return ERR_PTR(-EOPNOTSUPP);
+		ev = ppmu->generic_events[ev];
+		break;
+	case PERF_TYPE_HW_CACHE:
+		err = hw_perf_cache_event(event->attr.config, &ev);
+		if (err)
+			return ERR_PTR(err);
+		break;
+	case PERF_TYPE_RAW:
+		ev = event->attr.config;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+	event->hw.config_base = ev;
+	event->hw.idx = 0;
+
+	/*
+	 * If we are not running on a hypervisor, force the
+	 * exclude_hv bit to 0 so that we don't care what
+	 * the user set it to.
+	 */
+	if (!firmware_has_feature(FW_FEATURE_LPAR))
+		event->attr.exclude_hv = 0;
+
+	/*
+	 * If this is a per-task event, then we can use
+	 * PM_RUN_* events interchangeably with their non RUN_*
+	 * equivalents, e.g. PM_RUN_CYC instead of PM_CYC.
+	 * XXX we should check if the task is an idle task.
+	 */
+	flags = 0;
+	if (event->ctx->task)
+		flags |= PPMU_ONLY_COUNT_RUN;
+
+	/*
+	 * If this machine has limited events, check whether this
+	 * event_id could go on a limited event.
+	 */
+	if (ppmu->flags & PPMU_LIMITED_PMC5_6) {
+		if (can_go_on_limited_pmc(event, ev, flags)) {
+			flags |= PPMU_LIMITED_PMC_OK;
+		} else if (ppmu->limited_pmc_event(ev)) {
+			/*
+			 * The requested event_id is on a limited PMC,
+			 * but we can't use a limited PMC; see if any
+			 * alternative goes on a normal PMC.
+			 */
+			ev = normal_pmc_alternative(ev, flags);
+			if (!ev)
+				return ERR_PTR(-EINVAL);
+		}
+	}
+
+	/*
+	 * If this is in a group, check if it can go on with all the
+	 * other hardware events in the group.  We assume the event
+	 * hasn't been linked into its leader's sibling list at this point.
+	 */
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader, ppmu->n_event - 1,
+				   ctrs, events, cflags);
+		if (n < 0)
+			return ERR_PTR(-EINVAL);
+	}
+	events[n] = ev;
+	ctrs[n] = event;
+	cflags[n] = flags;
+	if (check_excludes(ctrs, cflags, n, 1))
+		return ERR_PTR(-EINVAL);
+
+	cpuhw = &get_cpu_var(cpu_hw_events);
+	err = power_check_constraints(cpuhw, events, cflags, n + 1);
+	put_cpu_var(cpu_hw_events);
+	if (err)
+		return ERR_PTR(-EINVAL);
+
+	event->hw.config = events[n];
+	event->hw.event_base = cflags[n];
+	event->hw.last_period = event->hw.sample_period;
+	atomic64_set(&event->hw.period_left, event->hw.last_period);
+
+	/*
+	 * See if we need to reserve the PMU.
+	 * If no events are currently in use, then we have to take a
+	 * mutex to ensure that we don't race with another task doing
+	 * reserve_pmc_hardware or release_pmc_hardware.
+	 */
+	err = 0;
+	if (!atomic_inc_not_zero(&num_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&num_events) == 0 &&
+		    reserve_pmc_hardware(perf_event_interrupt))
+			err = -EBUSY;
+		else
+			atomic_inc(&num_events);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+	event->destroy = hw_perf_event_destroy;
+
+	if (err)
+		return ERR_PTR(err);
+	return &power_pmu;
+}
+
+/*
+ * A event has overflowed; update its count and record
+ * things if requested.  Note that interrupts are hard-disabled
+ * here so there is no possibility of being interrupted.
+ */
+static void record_and_restart(struct perf_event *event, unsigned long val,
+			       struct pt_regs *regs, int nmi)
+{
+	u64 period = event->hw.sample_period;
+	s64 prev, delta, left;
+	int record = 0;
+
+	/* we don't have to worry about interrupts here */
+	prev = atomic64_read(&event->hw.prev_count);
+	delta = (val - prev) & 0xfffffffful;
+	atomic64_add(delta, &event->count);
+
+	/*
+	 * See if the total period for this event has expired,
+	 * and update for the next period.
+	 */
+	val = 0;
+	left = atomic64_read(&event->hw.period_left) - delta;
+	if (period) {
+		if (left <= 0) {
+			left += period;
+			if (left <= 0)
+				left = period;
+			record = 1;
+		}
+		if (left < 0x80000000LL)
+			val = 0x80000000LL - left;
+	}
+
+	/*
+	 * Finally record data if requested.
+	 */
+	if (record) {
+		struct perf_sample_data data = {
+			.addr	= 0,
+			.period	= event->hw.last_period,
+		};
+
+		if (event->attr.sample_type & PERF_SAMPLE_ADDR)
+			perf_get_data_addr(regs, &data.addr);
+
+		if (perf_event_overflow(event, nmi, &data, regs)) {
+			/*
+			 * Interrupts are coming too fast - throttle them
+			 * by setting the event to 0, so it will be
+			 * at least 2^30 cycles until the next interrupt
+			 * (assuming each event counts at most 2 counts
+			 * per cycle).
+			 */
+			val = 0;
+			left = ~0ULL >> 1;
+		}
+	}
+
+	write_pmc(event->hw.idx, val);
+	atomic64_set(&event->hw.prev_count, val);
+	atomic64_set(&event->hw.period_left, left);
+	perf_event_update_userpage(event);
+}
+
+/*
+ * Called from generic code to get the misc flags (i.e. processor mode)
+ * for an event_id.
+ */
+unsigned long perf_misc_flags(struct pt_regs *regs)
+{
+	u32 flags = perf_get_misc_flags(regs);
+
+	if (flags)
+		return flags;
+	return user_mode(regs) ? PERF_RECORD_MISC_USER :
+		PERF_RECORD_MISC_KERNEL;
+}
+
+/*
+ * Called from generic code to get the instruction pointer
+ * for an event_id.
+ */
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
+{
+	unsigned long ip;
+
+	if (TRAP(regs) != 0xf00)
+		return regs->nip;	/* not a PMU interrupt */
+
+	ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
+	return ip;
+}
+
+/*
+ * Performance monitor interrupt stuff
+ */
+static void perf_event_interrupt(struct pt_regs *regs)
+{
+	int i;
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+	struct perf_event *event;
+	unsigned long val;
+	int found = 0;
+	int nmi;
+
+	if (cpuhw->n_limited)
+		freeze_limited_events(cpuhw, mfspr(SPRN_PMC5),
+					mfspr(SPRN_PMC6));
+
+	perf_read_regs(regs);
+
+	nmi = perf_intr_is_nmi(regs);
+	if (nmi)
+		nmi_enter();
+	else
+		irq_enter();
+
+	for (i = 0; i < cpuhw->n_events; ++i) {
+		event = cpuhw->event[i];
+		if (!event->hw.idx || is_limited_pmc(event->hw.idx))
+			continue;
+		val = read_pmc(event->hw.idx);
+		if ((int)val < 0) {
+			/* event has overflowed */
+			found = 1;
+			record_and_restart(event, val, regs, nmi);
+		}
+	}
+
+	/*
+	 * In case we didn't find and reset the event that caused
+	 * the interrupt, scan all events and reset any that are
+	 * negative, to avoid getting continual interrupts.
+	 * Any that we processed in the previous loop will not be negative.
+	 */
+	if (!found) {
+		for (i = 0; i < ppmu->n_event; ++i) {
+			if (is_limited_pmc(i + 1))
+				continue;
+			val = read_pmc(i + 1);
+			if ((int)val < 0)
+				write_pmc(i + 1, 0);
+		}
+	}
+
+	/*
+	 * Reset MMCR0 to its normal value.  This will set PMXE and
+	 * clear FC (freeze events) and PMAO (perf mon alert occurred)
+	 * and thus allow interrupts to occur again.
+	 * XXX might want to use MSR.PM to keep the events frozen until
+	 * we get back out of this interrupt.
+	 */
+	write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+
+	if (nmi)
+		nmi_exit();
+	else
+		irq_exit();
+}
+
+void hw_perf_event_setup(int cpu)
+{
+	struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+	if (!ppmu)
+		return;
+	memset(cpuhw, 0, sizeof(*cpuhw));
+	cpuhw->mmcr[0] = MMCR0_FC;
+}
+
+int register_power_pmu(struct power_pmu *pmu)
+{
+	if (ppmu)
+		return -EBUSY;		/* something's already registered */
+
+	ppmu = pmu;
+	pr_info("%s performance monitor hardware support registered\n",
+		pmu->name);
+
+#ifdef MSR_HV
+	/*
+	 * Use FCHV to ignore kernel events if MSR.HV is set.
+	 */
+	if (mfmsr() & MSR_HV)
+		freeze_events_kernel = MMCR0_FCHV;
+#endif /* CONFIG_PPC64 */
+
+	return 0;
+}
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
index 3c90a3d9173..2a361cdda63 100644
--- a/arch/powerpc/kernel/power4-pmu.c
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/kernel.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index 31918af3e35..0f4c1c73a6a 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/kernel.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index 867f6f66396..c351b3a57fb 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/kernel.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index fa21890531d..ca399ba5034 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/kernel.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 018d094d92f..28a4daacdc0 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/kernel.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/string.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 75dccb71a04..479574413a9 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -9,7 +9,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/string.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <asm/reg.h>
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 465e498bcb3..df45a7449a6 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -53,7 +53,7 @@
 #include <linux/posix-timers.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -527,25 +527,25 @@ void __init iSeries_time_init_early(void)
 }
 #endif /* CONFIG_PPC_ISERIES */
 
-#if defined(CONFIG_PERF_COUNTERS) && defined(CONFIG_PPC32)
-DEFINE_PER_CPU(u8, perf_counter_pending);
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_PPC32)
+DEFINE_PER_CPU(u8, perf_event_pending);
 
-void set_perf_counter_pending(void)
+void set_perf_event_pending(void)
 {
-	get_cpu_var(perf_counter_pending) = 1;
+	get_cpu_var(perf_event_pending) = 1;
 	set_dec(1);
-	put_cpu_var(perf_counter_pending);
+	put_cpu_var(perf_event_pending);
 }
 
-#define test_perf_counter_pending()	__get_cpu_var(perf_counter_pending)
-#define clear_perf_counter_pending()	__get_cpu_var(perf_counter_pending) = 0
+#define test_perf_event_pending()	__get_cpu_var(perf_event_pending)
+#define clear_perf_event_pending()	__get_cpu_var(perf_event_pending) = 0
 
-#else  /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */
+#else  /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */
 
-#define test_perf_counter_pending()	0
-#define clear_perf_counter_pending()
+#define test_perf_event_pending()	0
+#define clear_perf_event_pending()
 
-#endif /* CONFIG_PERF_COUNTERS && CONFIG_PPC32 */
+#endif /* CONFIG_PERF_EVENTS && CONFIG_PPC32 */
 
 /*
  * For iSeries shared processors, we have to let the hypervisor
@@ -573,9 +573,9 @@ void timer_interrupt(struct pt_regs * regs)
 	set_dec(DECREMENTER_MAX);
 
 #ifdef CONFIG_PPC32
-	if (test_perf_counter_pending()) {
-		clear_perf_counter_pending();
-		perf_counter_do_pending();
+	if (test_perf_event_pending()) {
+		clear_perf_event_pending();
+		perf_event_do_pending();
 	}
 	if (atomic_read(&ppc_n_lost_interrupts) != 0)
 		do_IRQ(regs);
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 830bef0a113..e7dae82c128 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -29,7 +29,7 @@
 #include <linux/module.h>
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 
 #include <asm/firmware.h>
 #include <asm/page.h>
@@ -171,7 +171,7 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 		die("Weird page fault", regs, SIGSEGV);
 	}
 
-	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/* When running in the kernel we expect faults to occur only to
 	 * addresses in user space.  All other faults represent errors in the
@@ -312,7 +312,7 @@ good_area:
 	}
 	if (ret & VM_FAULT_MAJOR) {
 		current->maj_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
 				     regs, address);
 #ifdef CONFIG_PPC_SMLPAR
 		if (firmware_has_feature(FW_FEATURE_CMO)) {
@@ -323,7 +323,7 @@ good_area:
 #endif
 	} else {
 		current->min_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
 				     regs, address);
 	}
 	up_read(&mm->mmap_sem);
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 9efc8bda01b..e382cae678b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -280,9 +280,9 @@ config PPC_HAVE_PMU_SUPPORT
 
 config PPC_PERF_CTRS
        def_bool y
-       depends on PERF_COUNTERS && PPC_HAVE_PMU_SUPPORT
+       depends on PERF_EVENTS && PPC_HAVE_PMU_SUPPORT
        help
-         This enables the powerpc-specific perf_counter back-end.
+         This enables the powerpc-specific perf_event back-end.
 
 config SMP
 	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1c866efd217..43c0acad716 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -94,7 +94,7 @@ config S390
 	select HAVE_KVM if 64BIT
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
-	select HAVE_PERF_COUNTERS
+	select HAVE_PERF_EVENTS
 
 config SCHED_OMIT_FRAME_POINTER
 	bool
diff --git a/arch/s390/include/asm/perf_counter.h b/arch/s390/include/asm/perf_counter.h
deleted file mode 100644
index 7015188c2cc..00000000000
--- a/arch/s390/include/asm/perf_counter.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Performance counter support - s390 specific definitions.
- *
- * Copyright 2009 Martin Schwidefsky, IBM Corporation.
- */
-
-static inline void set_perf_counter_pending(void) {}
-static inline void clear_perf_counter_pending(void) {}
-
-#define PERF_COUNTER_INDEX_OFFSET 0
diff --git a/arch/s390/include/asm/perf_event.h b/arch/s390/include/asm/perf_event.h
new file mode 100644
index 00000000000..3840cbe7763
--- /dev/null
+++ b/arch/s390/include/asm/perf_event.h
@@ -0,0 +1,10 @@
+/*
+ * Performance event support - s390 specific definitions.
+ *
+ * Copyright 2009 Martin Schwidefsky, IBM Corporation.
+ */
+
+static inline void set_perf_event_pending(void) {}
+static inline void clear_perf_event_pending(void) {}
+
+#define PERF_EVENT_INDEX_OFFSET 0
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
index c80602d7c88..cb5232df151 100644
--- a/arch/s390/include/asm/unistd.h
+++ b/arch/s390/include/asm/unistd.h
@@ -268,7 +268,7 @@
 #define	__NR_preadv		328
 #define	__NR_pwritev		329
 #define __NR_rt_tgsigqueueinfo	330
-#define __NR_perf_counter_open	331
+#define __NR_perf_event_open	331
 #define NR_syscalls 332
 
 /* 
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 88a83366819..624790042d4 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1832,11 +1832,11 @@ compat_sys_rt_tgsigqueueinfo_wrapper:
 	llgtr	%r5,%r5			# struct compat_siginfo *
 	jg	compat_sys_rt_tgsigqueueinfo_wrapper # branch to system call
 
-	.globl	sys_perf_counter_open_wrapper
-sys_perf_counter_open_wrapper:
-	llgtr	%r2,%r2			# const struct perf_counter_attr *
+	.globl	sys_perf_event_open_wrapper
+sys_perf_event_open_wrapper:
+	llgtr	%r2,%r2			# const struct perf_event_attr *
 	lgfr	%r3,%r3			# pid_t
 	lgfr	%r4,%r4			# int
 	lgfr	%r5,%r5			# int
 	llgfr	%r6,%r6			# unsigned long
-	jg	sys_perf_counter_open	# branch to system call
+	jg	sys_perf_event_open	# branch to system call
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index ad1acd20038..0b5083681e7 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -339,4 +339,4 @@ SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
 SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
 SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
 SYSCALL(sys_rt_tgsigqueueinfo,sys_rt_tgsigqueueinfo,compat_sys_rt_tgsigqueueinfo_wrapper) /* 330 */
-SYSCALL(sys_perf_counter_open,sys_perf_counter_open,sys_perf_counter_open_wrapper)
+SYSCALL(sys_perf_event_open,sys_perf_event_open,sys_perf_event_open_wrapper)
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 1abbadd497e..6d507462967 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -10,7 +10,7 @@
  *    Copyright (C) 1995  Linus Torvalds
  */
 
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -306,7 +306,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int write)
 	 * interrupts again and then search the VMAs
 	 */
 	local_irq_enable();
-	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 	down_read(&mm->mmap_sem);
 
 	si_code = SEGV_MAPERR;
@@ -366,11 +366,11 @@ good_area:
 	}
 	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
 				     regs, address);
 	} else {
 		tsk->min_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
 				     regs, address);
 	}
         up_read(&mm->mmap_sem);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 4df3570fe51..b940424f8cc 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,7 +16,7 @@ config SUPERH
 	select HAVE_IOREMAP_PROT if MMU
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_PERF_COUNTERS
+	select HAVE_PERF_EVENTS
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
deleted file mode 100644
index d8e6bb9c0cc..00000000000
--- a/arch/sh/include/asm/perf_counter.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_SH_PERF_COUNTER_H
-#define __ASM_SH_PERF_COUNTER_H
-
-/* SH only supports software counters through this interface. */
-static inline void set_perf_counter_pending(void) {}
-
-#define PERF_COUNTER_INDEX_OFFSET	0
-
-#endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/asm/perf_event.h b/arch/sh/include/asm/perf_event.h
new file mode 100644
index 00000000000..11a302297ab
--- /dev/null
+++ b/arch/sh/include/asm/perf_event.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_PERF_EVENT_H
+#define __ASM_SH_PERF_EVENT_H
+
+/* SH only supports software events through this interface. */
+static inline void set_perf_event_pending(void) {}
+
+#define PERF_EVENT_INDEX_OFFSET	0
+
+#endif /* __ASM_SH_PERF_EVENT_H */
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 925dd40d9d5..f3fd1b9eb6b 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -344,7 +344,7 @@
 #define __NR_preadv		333
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
-#define __NR_perf_counter_open	336
+#define __NR_perf_event_open	336
 
 #define NR_syscalls 337
 
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
index 2b84bc916bc..343ce8f073e 100644
--- a/arch/sh/include/asm/unistd_64.h
+++ b/arch/sh/include/asm/unistd_64.h
@@ -384,7 +384,7 @@
 #define __NR_preadv		361
 #define __NR_pwritev		362
 #define __NR_rt_tgsigqueueinfo	363
-#define __NR_perf_counter_open	364
+#define __NR_perf_event_open	364
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 16ba225ede8..19fd11dd987 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -352,4 +352,4 @@ ENTRY(sys_call_table)
 	.long sys_preadv
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index af6fb7410c2..5bfde6c7749 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -390,4 +390,4 @@ sys_call_table:
 	.long sys_preadv
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index 781b413ff82..47530104e0a 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,7 +15,7 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
@@ -157,7 +157,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	if ((regs->sr & SR_IMASK) != SR_IMASK)
 		local_irq_enable();
 
-	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt, have no user context or are running
@@ -208,11 +208,11 @@ survive:
 	}
 	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
 				     regs, address);
 	} else {
 		tsk->min_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
 				     regs, address);
 	}
 
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index 2dcc48528f7..de0b0e88182 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -20,7 +20,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -116,7 +116,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	/* Not an IO address, so reenable interrupts */
 	local_irq_enable();
 
-	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -201,11 +201,11 @@ survive:
 
 	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
 				     regs, address);
 	} else {
 		tsk->min_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
 				     regs, address);
 	}
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 86b82348b97..97fca4695e0 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,7 +25,7 @@ config SPARC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select RTC_CLASS
 	select RTC_DRV_M48T59
-	select HAVE_PERF_COUNTERS
+	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 
@@ -47,7 +47,7 @@ config SPARC64
 	select RTC_DRV_BQ4802
 	select RTC_DRV_SUN4V
 	select RTC_DRV_STARFIRE
-	select HAVE_PERF_COUNTERS
+	select HAVE_PERF_EVENTS
 
 config ARCH_DEFCONFIG
 	string
diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
deleted file mode 100644
index 5d7a8ca0e49..00000000000
--- a/arch/sparc/include/asm/perf_counter.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_SPARC_PERF_COUNTER_H
-#define __ASM_SPARC_PERF_COUNTER_H
-
-extern void set_perf_counter_pending(void);
-
-#define	PERF_COUNTER_INDEX_OFFSET	0
-
-#ifdef CONFIG_PERF_COUNTERS
-extern void init_hw_perf_counters(void);
-#else
-static inline void init_hw_perf_counters(void)	{ }
-#endif
-
-#endif
diff --git a/arch/sparc/include/asm/perf_event.h b/arch/sparc/include/asm/perf_event.h
new file mode 100644
index 00000000000..7e2669894ce
--- /dev/null
+++ b/arch/sparc/include/asm/perf_event.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_SPARC_PERF_EVENT_H
+#define __ASM_SPARC_PERF_EVENT_H
+
+extern void set_perf_event_pending(void);
+
+#define	PERF_EVENT_INDEX_OFFSET	0
+
+#ifdef CONFIG_PERF_EVENTS
+extern void init_hw_perf_events(void);
+#else
+static inline void init_hw_perf_events(void)	{ }
+#endif
+
+#endif
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 706df669f3b..42f2316c3ea 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -395,7 +395,7 @@
 #define __NR_preadv		324
 #define __NR_pwritev		325
 #define __NR_rt_tgsigqueueinfo	326
-#define __NR_perf_counter_open	327
+#define __NR_perf_event_open	327
 
 #define NR_SYSCALLS		328
 
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 247cc620cee..3a048fad7ee 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -104,5 +104,5 @@ obj-$(CONFIG_AUDIT)     += audit.o
 audit--$(CONFIG_AUDIT)  := compat_audit.o
 obj-$(CONFIG_COMPAT)    += $(audit--y)
 
-pc--$(CONFIG_PERF_COUNTERS) := perf_counter.o
+pc--$(CONFIG_PERF_EVENTS) := perf_event.o
 obj-$(CONFIG_SPARC64)	+= $(pc--y)
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 378eb53e077..b129611590a 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/smp.h>
 
-#include <asm/perf_counter.h>
+#include <asm/perf_event.h>
 #include <asm/ptrace.h>
 #include <asm/local.h>
 #include <asm/pcr.h>
@@ -265,7 +265,7 @@ int __init nmi_init(void)
 		}
 	}
 	if (!err)
-		init_hw_perf_counters();
+		init_hw_perf_events();
 
 	return err;
 }
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index 68ff0010707..2d94e7a03af 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -7,7 +7,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 
 #include <asm/pil.h>
 #include <asm/pcr.h>
@@ -15,7 +15,7 @@
 
 /* This code is shared between various users of the performance
  * counters.  Users will be oprofile, pseudo-NMI watchdog, and the
- * perf_counter support layer.
+ * perf_event support layer.
  */
 
 #define PCR_SUN4U_ENABLE	(PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE)
@@ -42,14 +42,14 @@ void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
 
 	old_regs = set_irq_regs(regs);
 	irq_enter();
-#ifdef CONFIG_PERF_COUNTERS
-	perf_counter_do_pending();
+#ifdef CONFIG_PERF_EVENTS
+	perf_event_do_pending();
 #endif
 	irq_exit();
 	set_irq_regs(old_regs);
 }
 
-void set_perf_counter_pending(void)
+void set_perf_event_pending(void)
 {
 	set_softint(1 << PIL_DEFERRED_PCR_WORK);
 }
diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
deleted file mode 100644
index b1265ce8a05..00000000000
--- a/arch/sparc/kernel/perf_counter.c
+++ /dev/null
@@ -1,556 +0,0 @@
-/* Performance counter support for sparc64.
- *
- * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
- *
- * This code is based almost entirely upon the x86 perf counter
- * code, which is:
- *
- *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- *  Copyright (C) 2009 Jaswinder Singh Rajput
- *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
- */
-
-#include <linux/perf_counter.h>
-#include <linux/kprobes.h>
-#include <linux/kernel.h>
-#include <linux/kdebug.h>
-#include <linux/mutex.h>
-
-#include <asm/cpudata.h>
-#include <asm/atomic.h>
-#include <asm/nmi.h>
-#include <asm/pcr.h>
-
-/* Sparc64 chips have two performance counters, 32-bits each, with
- * overflow interrupts generated on transition from 0xffffffff to 0.
- * The counters are accessed in one go using a 64-bit register.
- *
- * Both counters are controlled using a single control register.  The
- * only way to stop all sampling is to clear all of the context (user,
- * supervisor, hypervisor) sampling enable bits.  But these bits apply
- * to both counters, thus the two counters can't be enabled/disabled
- * individually.
- *
- * The control register has two event fields, one for each of the two
- * counters.  It's thus nearly impossible to have one counter going
- * while keeping the other one stopped.  Therefore it is possible to
- * get overflow interrupts for counters not currently "in use" and
- * that condition must be checked in the overflow interrupt handler.
- *
- * So we use a hack, in that we program inactive counters with the
- * "sw_count0" and "sw_count1" events.  These count how many times
- * the instruction "sethi %hi(0xfc000), %g0" is executed.  It's an
- * unusual way to encode a NOP and therefore will not trigger in
- * normal code.
- */
-
-#define MAX_HWCOUNTERS			2
-#define MAX_PERIOD			((1UL << 32) - 1)
-
-#define PIC_UPPER_INDEX			0
-#define PIC_LOWER_INDEX			1
-
-struct cpu_hw_counters {
-	struct perf_counter	*counters[MAX_HWCOUNTERS];
-	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
-	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
-	int enabled;
-};
-DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = { .enabled = 1, };
-
-struct perf_event_map {
-	u16	encoding;
-	u8	pic_mask;
-#define PIC_NONE	0x00
-#define PIC_UPPER	0x01
-#define PIC_LOWER	0x02
-};
-
-struct sparc_pmu {
-	const struct perf_event_map	*(*event_map)(int);
-	int				max_events;
-	int				upper_shift;
-	int				lower_shift;
-	int				event_mask;
-	int				hv_bit;
-	int				irq_bit;
-	int				upper_nop;
-	int				lower_nop;
-};
-
-static const struct perf_event_map ultra3i_perfmon_event_map[] = {
-	[PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
-	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
-	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
-	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
-};
-
-static const struct perf_event_map *ultra3i_event_map(int event)
-{
-	return &ultra3i_perfmon_event_map[event];
-}
-
-static const struct sparc_pmu ultra3i_pmu = {
-	.event_map	= ultra3i_event_map,
-	.max_events	= ARRAY_SIZE(ultra3i_perfmon_event_map),
-	.upper_shift	= 11,
-	.lower_shift	= 4,
-	.event_mask	= 0x3f,
-	.upper_nop	= 0x1c,
-	.lower_nop	= 0x14,
-};
-
-static const struct perf_event_map niagara2_perfmon_event_map[] = {
-	[PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
-	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
-	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0208, PIC_UPPER | PIC_LOWER },
-	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0302, PIC_UPPER | PIC_LOWER },
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x0201, PIC_UPPER | PIC_LOWER },
-	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x0202, PIC_UPPER | PIC_LOWER },
-};
-
-static const struct perf_event_map *niagara2_event_map(int event)
-{
-	return &niagara2_perfmon_event_map[event];
-}
-
-static const struct sparc_pmu niagara2_pmu = {
-	.event_map	= niagara2_event_map,
-	.max_events	= ARRAY_SIZE(niagara2_perfmon_event_map),
-	.upper_shift	= 19,
-	.lower_shift	= 6,
-	.event_mask	= 0xfff,
-	.hv_bit		= 0x8,
-	.irq_bit	= 0x03,
-	.upper_nop	= 0x220,
-	.lower_nop	= 0x220,
-};
-
-static const struct sparc_pmu *sparc_pmu __read_mostly;
-
-static u64 event_encoding(u64 event, int idx)
-{
-	if (idx == PIC_UPPER_INDEX)
-		event <<= sparc_pmu->upper_shift;
-	else
-		event <<= sparc_pmu->lower_shift;
-	return event;
-}
-
-static u64 mask_for_index(int idx)
-{
-	return event_encoding(sparc_pmu->event_mask, idx);
-}
-
-static u64 nop_for_index(int idx)
-{
-	return event_encoding(idx == PIC_UPPER_INDEX ?
-			      sparc_pmu->upper_nop :
-			      sparc_pmu->lower_nop, idx);
-}
-
-static inline void sparc_pmu_enable_counter(struct hw_perf_counter *hwc,
-					    int idx)
-{
-	u64 val, mask = mask_for_index(idx);
-
-	val = pcr_ops->read();
-	pcr_ops->write((val & ~mask) | hwc->config);
-}
-
-static inline void sparc_pmu_disable_counter(struct hw_perf_counter *hwc,
-					     int idx)
-{
-	u64 mask = mask_for_index(idx);
-	u64 nop = nop_for_index(idx);
-	u64 val = pcr_ops->read();
-
-	pcr_ops->write((val & ~mask) | nop);
-}
-
-void hw_perf_enable(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	u64 val;
-	int i;
-
-	if (cpuc->enabled)
-		return;
-
-	cpuc->enabled = 1;
-	barrier();
-
-	val = pcr_ops->read();
-
-	for (i = 0; i < MAX_HWCOUNTERS; i++) {
-		struct perf_counter *cp = cpuc->counters[i];
-		struct hw_perf_counter *hwc;
-
-		if (!cp)
-			continue;
-		hwc = &cp->hw;
-		val |= hwc->config_base;
-	}
-
-	pcr_ops->write(val);
-}
-
-void hw_perf_disable(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	u64 val;
-
-	if (!cpuc->enabled)
-		return;
-
-	cpuc->enabled = 0;
-
-	val = pcr_ops->read();
-	val &= ~(PCR_UTRACE | PCR_STRACE |
-		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
-	pcr_ops->write(val);
-}
-
-static u32 read_pmc(int idx)
-{
-	u64 val;
-
-	read_pic(val);
-	if (idx == PIC_UPPER_INDEX)
-		val >>= 32;
-
-	return val & 0xffffffff;
-}
-
-static void write_pmc(int idx, u64 val)
-{
-	u64 shift, mask, pic;
-
-	shift = 0;
-	if (idx == PIC_UPPER_INDEX)
-		shift = 32;
-
-	mask = ((u64) 0xffffffff) << shift;
-	val <<= shift;
-
-	read_pic(pic);
-	pic &= ~mask;
-	pic |= val;
-	write_pic(pic);
-}
-
-static int sparc_perf_counter_set_period(struct perf_counter *counter,
-					 struct hw_perf_counter *hwc, int idx)
-{
-	s64 left = atomic64_read(&hwc->period_left);
-	s64 period = hwc->sample_period;
-	int ret = 0;
-
-	if (unlikely(left <= -period)) {
-		left = period;
-		atomic64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (unlikely(left <= 0)) {
-		left += period;
-		atomic64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-	if (left > MAX_PERIOD)
-		left = MAX_PERIOD;
-
-	atomic64_set(&hwc->prev_count, (u64)-left);
-
-	write_pmc(idx, (u64)(-left) & 0xffffffff);
-
-	perf_counter_update_userpage(counter);
-
-	return ret;
-}
-
-static int sparc_pmu_enable(struct perf_counter *counter)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	struct hw_perf_counter *hwc = &counter->hw;
-	int idx = hwc->idx;
-
-	if (test_and_set_bit(idx, cpuc->used_mask))
-		return -EAGAIN;
-
-	sparc_pmu_disable_counter(hwc, idx);
-
-	cpuc->counters[idx] = counter;
-	set_bit(idx, cpuc->active_mask);
-
-	sparc_perf_counter_set_period(counter, hwc, idx);
-	sparc_pmu_enable_counter(hwc, idx);
-	perf_counter_update_userpage(counter);
-	return 0;
-}
-
-static u64 sparc_perf_counter_update(struct perf_counter *counter,
-				     struct hw_perf_counter *hwc, int idx)
-{
-	int shift = 64 - 32;
-	u64 prev_raw_count, new_raw_count;
-	s64 delta;
-
-again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
-	new_raw_count = read_pmc(idx);
-
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
-			     new_raw_count) != prev_raw_count)
-		goto again;
-
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
-
-	atomic64_add(delta, &counter->count);
-	atomic64_sub(delta, &hwc->period_left);
-
-	return new_raw_count;
-}
-
-static void sparc_pmu_disable(struct perf_counter *counter)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	struct hw_perf_counter *hwc = &counter->hw;
-	int idx = hwc->idx;
-
-	clear_bit(idx, cpuc->active_mask);
-	sparc_pmu_disable_counter(hwc, idx);
-
-	barrier();
-
-	sparc_perf_counter_update(counter, hwc, idx);
-	cpuc->counters[idx] = NULL;
-	clear_bit(idx, cpuc->used_mask);
-
-	perf_counter_update_userpage(counter);
-}
-
-static void sparc_pmu_read(struct perf_counter *counter)
-{
-	struct hw_perf_counter *hwc = &counter->hw;
-	sparc_perf_counter_update(counter, hwc, hwc->idx);
-}
-
-static void sparc_pmu_unthrottle(struct perf_counter *counter)
-{
-	struct hw_perf_counter *hwc = &counter->hw;
-	sparc_pmu_enable_counter(hwc, hwc->idx);
-}
-
-static atomic_t active_counters = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmc_grab_mutex);
-
-void perf_counter_grab_pmc(void)
-{
-	if (atomic_inc_not_zero(&active_counters))
-		return;
-
-	mutex_lock(&pmc_grab_mutex);
-	if (atomic_read(&active_counters) == 0) {
-		if (atomic_read(&nmi_active) > 0) {
-			on_each_cpu(stop_nmi_watchdog, NULL, 1);
-			BUG_ON(atomic_read(&nmi_active) != 0);
-		}
-		atomic_inc(&active_counters);
-	}
-	mutex_unlock(&pmc_grab_mutex);
-}
-
-void perf_counter_release_pmc(void)
-{
-	if (atomic_dec_and_mutex_lock(&active_counters, &pmc_grab_mutex)) {
-		if (atomic_read(&nmi_active) == 0)
-			on_each_cpu(start_nmi_watchdog, NULL, 1);
-		mutex_unlock(&pmc_grab_mutex);
-	}
-}
-
-static void hw_perf_counter_destroy(struct perf_counter *counter)
-{
-	perf_counter_release_pmc();
-}
-
-static int __hw_perf_counter_init(struct perf_counter *counter)
-{
-	struct perf_counter_attr *attr = &counter->attr;
-	struct hw_perf_counter *hwc = &counter->hw;
-	const struct perf_event_map *pmap;
-	u64 enc;
-
-	if (atomic_read(&nmi_active) < 0)
-		return -ENODEV;
-
-	if (attr->type != PERF_TYPE_HARDWARE)
-		return -EOPNOTSUPP;
-
-	if (attr->config >= sparc_pmu->max_events)
-		return -EINVAL;
-
-	perf_counter_grab_pmc();
-	counter->destroy = hw_perf_counter_destroy;
-
-	/* We save the enable bits in the config_base.  So to
-	 * turn off sampling just write 'config', and to enable
-	 * things write 'config | config_base'.
-	 */
-	hwc->config_base = sparc_pmu->irq_bit;
-	if (!attr->exclude_user)
-		hwc->config_base |= PCR_UTRACE;
-	if (!attr->exclude_kernel)
-		hwc->config_base |= PCR_STRACE;
-	if (!attr->exclude_hv)
-		hwc->config_base |= sparc_pmu->hv_bit;
-
-	if (!hwc->sample_period) {
-		hwc->sample_period = MAX_PERIOD;
-		hwc->last_period = hwc->sample_period;
-		atomic64_set(&hwc->period_left, hwc->sample_period);
-	}
-
-	pmap = sparc_pmu->event_map(attr->config);
-
-	enc = pmap->encoding;
-	if (pmap->pic_mask & PIC_UPPER) {
-		hwc->idx = PIC_UPPER_INDEX;
-		enc <<= sparc_pmu->upper_shift;
-	} else {
-		hwc->idx = PIC_LOWER_INDEX;
-		enc <<= sparc_pmu->lower_shift;
-	}
-
-	hwc->config |= enc;
-	return 0;
-}
-
-static const struct pmu pmu = {
-	.enable		= sparc_pmu_enable,
-	.disable	= sparc_pmu_disable,
-	.read		= sparc_pmu_read,
-	.unthrottle	= sparc_pmu_unthrottle,
-};
-
-const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
-{
-	int err = __hw_perf_counter_init(counter);
-
-	if (err)
-		return ERR_PTR(err);
-	return &pmu;
-}
-
-void perf_counter_print_debug(void)
-{
-	unsigned long flags;
-	u64 pcr, pic;
-	int cpu;
-
-	if (!sparc_pmu)
-		return;
-
-	local_irq_save(flags);
-
-	cpu = smp_processor_id();
-
-	pcr = pcr_ops->read();
-	read_pic(pic);
-
-	pr_info("\n");
-	pr_info("CPU#%d: PCR[%016llx] PIC[%016llx]\n",
-		cpu, pcr, pic);
-
-	local_irq_restore(flags);
-}
-
-static int __kprobes perf_counter_nmi_handler(struct notifier_block *self,
-					      unsigned long cmd, void *__args)
-{
-	struct die_args *args = __args;
-	struct perf_sample_data data;
-	struct cpu_hw_counters *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	if (!atomic_read(&active_counters))
-		return NOTIFY_DONE;
-
-	switch (cmd) {
-	case DIE_NMI:
-		break;
-
-	default:
-		return NOTIFY_DONE;
-	}
-
-	regs = args->regs;
-
-	data.addr = 0;
-
-	cpuc = &__get_cpu_var(cpu_hw_counters);
-	for (idx = 0; idx < MAX_HWCOUNTERS; idx++) {
-		struct perf_counter *counter = cpuc->counters[idx];
-		struct hw_perf_counter *hwc;
-		u64 val;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-		hwc = &counter->hw;
-		val = sparc_perf_counter_update(counter, hwc, idx);
-		if (val & (1ULL << 31))
-			continue;
-
-		data.period = counter->hw.last_period;
-		if (!sparc_perf_counter_set_period(counter, hwc, idx))
-			continue;
-
-		if (perf_counter_overflow(counter, 1, &data, regs))
-			sparc_pmu_disable_counter(hwc, idx);
-	}
-
-	return NOTIFY_STOP;
-}
-
-static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
-	.notifier_call		= perf_counter_nmi_handler,
-};
-
-static bool __init supported_pmu(void)
-{
-	if (!strcmp(sparc_pmu_type, "ultra3i")) {
-		sparc_pmu = &ultra3i_pmu;
-		return true;
-	}
-	if (!strcmp(sparc_pmu_type, "niagara2")) {
-		sparc_pmu = &niagara2_pmu;
-		return true;
-	}
-	return false;
-}
-
-void __init init_hw_perf_counters(void)
-{
-	pr_info("Performance counters: ");
-
-	if (!supported_pmu()) {
-		pr_cont("No support for PMU type '%s'\n", sparc_pmu_type);
-		return;
-	}
-
-	pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
-
-	/* All sparc64 PMUs currently have 2 counters.  But this simple
-	 * driver only supports one active counter at a time.
-	 */
-	perf_max_counters = 1;
-
-	register_die_notifier(&perf_counter_nmi_notifier);
-}
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
new file mode 100644
index 00000000000..2d6a1b10c81
--- /dev/null
+++ b/arch/sparc/kernel/perf_event.c
@@ -0,0 +1,556 @@
+/* Performance event support for sparc64.
+ *
+ * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ *
+ * This code is based almost entirely upon the x86 perf event
+ * code, which is:
+ *
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ */
+
+#include <linux/perf_event.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+
+#include <asm/cpudata.h>
+#include <asm/atomic.h>
+#include <asm/nmi.h>
+#include <asm/pcr.h>
+
+/* Sparc64 chips have two performance counters, 32-bits each, with
+ * overflow interrupts generated on transition from 0xffffffff to 0.
+ * The counters are accessed in one go using a 64-bit register.
+ *
+ * Both counters are controlled using a single control register.  The
+ * only way to stop all sampling is to clear all of the context (user,
+ * supervisor, hypervisor) sampling enable bits.  But these bits apply
+ * to both counters, thus the two counters can't be enabled/disabled
+ * individually.
+ *
+ * The control register has two event fields, one for each of the two
+ * counters.  It's thus nearly impossible to have one counter going
+ * while keeping the other one stopped.  Therefore it is possible to
+ * get overflow interrupts for counters not currently "in use" and
+ * that condition must be checked in the overflow interrupt handler.
+ *
+ * So we use a hack, in that we program inactive counters with the
+ * "sw_count0" and "sw_count1" events.  These count how many times
+ * the instruction "sethi %hi(0xfc000), %g0" is executed.  It's an
+ * unusual way to encode a NOP and therefore will not trigger in
+ * normal code.
+ */
+
+#define MAX_HWEVENTS			2
+#define MAX_PERIOD			((1UL << 32) - 1)
+
+#define PIC_UPPER_INDEX			0
+#define PIC_LOWER_INDEX			1
+
+struct cpu_hw_events {
+	struct perf_event	*events[MAX_HWEVENTS];
+	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+	int enabled;
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
+
+struct perf_event_map {
+	u16	encoding;
+	u8	pic_mask;
+#define PIC_NONE	0x00
+#define PIC_UPPER	0x01
+#define PIC_LOWER	0x02
+};
+
+struct sparc_pmu {
+	const struct perf_event_map	*(*event_map)(int);
+	int				max_events;
+	int				upper_shift;
+	int				lower_shift;
+	int				event_mask;
+	int				hv_bit;
+	int				irq_bit;
+	int				upper_nop;
+	int				lower_nop;
+};
+
+static const struct perf_event_map ultra3i_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
+};
+
+static const struct perf_event_map *ultra3i_event_map(int event_id)
+{
+	return &ultra3i_perfmon_event_map[event_id];
+}
+
+static const struct sparc_pmu ultra3i_pmu = {
+	.event_map	= ultra3i_event_map,
+	.max_events	= ARRAY_SIZE(ultra3i_perfmon_event_map),
+	.upper_shift	= 11,
+	.lower_shift	= 4,
+	.event_mask	= 0x3f,
+	.upper_nop	= 0x1c,
+	.lower_nop	= 0x14,
+};
+
+static const struct perf_event_map niagara2_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0208, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0302, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x0201, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x0202, PIC_UPPER | PIC_LOWER },
+};
+
+static const struct perf_event_map *niagara2_event_map(int event_id)
+{
+	return &niagara2_perfmon_event_map[event_id];
+}
+
+static const struct sparc_pmu niagara2_pmu = {
+	.event_map	= niagara2_event_map,
+	.max_events	= ARRAY_SIZE(niagara2_perfmon_event_map),
+	.upper_shift	= 19,
+	.lower_shift	= 6,
+	.event_mask	= 0xfff,
+	.hv_bit		= 0x8,
+	.irq_bit	= 0x03,
+	.upper_nop	= 0x220,
+	.lower_nop	= 0x220,
+};
+
+static const struct sparc_pmu *sparc_pmu __read_mostly;
+
+static u64 event_encoding(u64 event_id, int idx)
+{
+	if (idx == PIC_UPPER_INDEX)
+		event_id <<= sparc_pmu->upper_shift;
+	else
+		event_id <<= sparc_pmu->lower_shift;
+	return event_id;
+}
+
+static u64 mask_for_index(int idx)
+{
+	return event_encoding(sparc_pmu->event_mask, idx);
+}
+
+static u64 nop_for_index(int idx)
+{
+	return event_encoding(idx == PIC_UPPER_INDEX ?
+			      sparc_pmu->upper_nop :
+			      sparc_pmu->lower_nop, idx);
+}
+
+static inline void sparc_pmu_enable_event(struct hw_perf_event *hwc,
+					    int idx)
+{
+	u64 val, mask = mask_for_index(idx);
+
+	val = pcr_ops->read();
+	pcr_ops->write((val & ~mask) | hwc->config);
+}
+
+static inline void sparc_pmu_disable_event(struct hw_perf_event *hwc,
+					     int idx)
+{
+	u64 mask = mask_for_index(idx);
+	u64 nop = nop_for_index(idx);
+	u64 val = pcr_ops->read();
+
+	pcr_ops->write((val & ~mask) | nop);
+}
+
+void hw_perf_enable(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val;
+	int i;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	val = pcr_ops->read();
+
+	for (i = 0; i < MAX_HWEVENTS; i++) {
+		struct perf_event *cp = cpuc->events[i];
+		struct hw_perf_event *hwc;
+
+		if (!cp)
+			continue;
+		hwc = &cp->hw;
+		val |= hwc->config_base;
+	}
+
+	pcr_ops->write(val);
+}
+
+void hw_perf_disable(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+
+	val = pcr_ops->read();
+	val &= ~(PCR_UTRACE | PCR_STRACE |
+		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
+	pcr_ops->write(val);
+}
+
+static u32 read_pmc(int idx)
+{
+	u64 val;
+
+	read_pic(val);
+	if (idx == PIC_UPPER_INDEX)
+		val >>= 32;
+
+	return val & 0xffffffff;
+}
+
+static void write_pmc(int idx, u64 val)
+{
+	u64 shift, mask, pic;
+
+	shift = 0;
+	if (idx == PIC_UPPER_INDEX)
+		shift = 32;
+
+	mask = ((u64) 0xffffffff) << shift;
+	val <<= shift;
+
+	read_pic(pic);
+	pic &= ~mask;
+	pic |= val;
+	write_pic(pic);
+}
+
+static int sparc_perf_event_set_period(struct perf_event *event,
+					 struct hw_perf_event *hwc, int idx)
+{
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+	if (left > MAX_PERIOD)
+		left = MAX_PERIOD;
+
+	atomic64_set(&hwc->prev_count, (u64)-left);
+
+	write_pmc(idx, (u64)(-left) & 0xffffffff);
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static int sparc_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	if (test_and_set_bit(idx, cpuc->used_mask))
+		return -EAGAIN;
+
+	sparc_pmu_disable_event(hwc, idx);
+
+	cpuc->events[idx] = event;
+	set_bit(idx, cpuc->active_mask);
+
+	sparc_perf_event_set_period(event, hwc, idx);
+	sparc_pmu_enable_event(hwc, idx);
+	perf_event_update_userpage(event);
+	return 0;
+}
+
+static u64 sparc_perf_event_update(struct perf_event *event,
+				     struct hw_perf_event *hwc, int idx)
+{
+	int shift = 64 - 32;
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = read_pmc(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static void sparc_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	clear_bit(idx, cpuc->active_mask);
+	sparc_pmu_disable_event(hwc, idx);
+
+	barrier();
+
+	sparc_perf_event_update(event, hwc, idx);
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+static void sparc_pmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	sparc_perf_event_update(event, hwc, hwc->idx);
+}
+
+static void sparc_pmu_unthrottle(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	sparc_pmu_enable_event(hwc, hwc->idx);
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmc_grab_mutex);
+
+void perf_event_grab_pmc(void)
+{
+	if (atomic_inc_not_zero(&active_events))
+		return;
+
+	mutex_lock(&pmc_grab_mutex);
+	if (atomic_read(&active_events) == 0) {
+		if (atomic_read(&nmi_active) > 0) {
+			on_each_cpu(stop_nmi_watchdog, NULL, 1);
+			BUG_ON(atomic_read(&nmi_active) != 0);
+		}
+		atomic_inc(&active_events);
+	}
+	mutex_unlock(&pmc_grab_mutex);
+}
+
+void perf_event_release_pmc(void)
+{
+	if (atomic_dec_and_mutex_lock(&active_events, &pmc_grab_mutex)) {
+		if (atomic_read(&nmi_active) == 0)
+			on_each_cpu(start_nmi_watchdog, NULL, 1);
+		mutex_unlock(&pmc_grab_mutex);
+	}
+}
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	perf_event_release_pmc();
+}
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	const struct perf_event_map *pmap;
+	u64 enc;
+
+	if (atomic_read(&nmi_active) < 0)
+		return -ENODEV;
+
+	if (attr->type != PERF_TYPE_HARDWARE)
+		return -EOPNOTSUPP;
+
+	if (attr->config >= sparc_pmu->max_events)
+		return -EINVAL;
+
+	perf_event_grab_pmc();
+	event->destroy = hw_perf_event_destroy;
+
+	/* We save the enable bits in the config_base.  So to
+	 * turn off sampling just write 'config', and to enable
+	 * things write 'config | config_base'.
+	 */
+	hwc->config_base = sparc_pmu->irq_bit;
+	if (!attr->exclude_user)
+		hwc->config_base |= PCR_UTRACE;
+	if (!attr->exclude_kernel)
+		hwc->config_base |= PCR_STRACE;
+	if (!attr->exclude_hv)
+		hwc->config_base |= sparc_pmu->hv_bit;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = MAX_PERIOD;
+		hwc->last_period = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	pmap = sparc_pmu->event_map(attr->config);
+
+	enc = pmap->encoding;
+	if (pmap->pic_mask & PIC_UPPER) {
+		hwc->idx = PIC_UPPER_INDEX;
+		enc <<= sparc_pmu->upper_shift;
+	} else {
+		hwc->idx = PIC_LOWER_INDEX;
+		enc <<= sparc_pmu->lower_shift;
+	}
+
+	hwc->config |= enc;
+	return 0;
+}
+
+static const struct pmu pmu = {
+	.enable		= sparc_pmu_enable,
+	.disable	= sparc_pmu_disable,
+	.read		= sparc_pmu_read,
+	.unthrottle	= sparc_pmu_unthrottle,
+};
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	int err = __hw_perf_event_init(event);
+
+	if (err)
+		return ERR_PTR(err);
+	return &pmu;
+}
+
+void perf_event_print_debug(void)
+{
+	unsigned long flags;
+	u64 pcr, pic;
+	int cpu;
+
+	if (!sparc_pmu)
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+
+	pcr = pcr_ops->read();
+	read_pic(pic);
+
+	pr_info("\n");
+	pr_info("CPU#%d: PCR[%016llx] PIC[%016llx]\n",
+		cpu, pcr, pic);
+
+	local_irq_restore(flags);
+}
+
+static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
+					      unsigned long cmd, void *__args)
+{
+	struct die_args *args = __args;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	if (!atomic_read(&active_events))
+		return NOTIFY_DONE;
+
+	switch (cmd) {
+	case DIE_NMI:
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	regs = args->regs;
+
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx < MAX_HWEVENTS; idx++) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+		u64 val;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		hwc = &event->hw;
+		val = sparc_perf_event_update(event, hwc, idx);
+		if (val & (1ULL << 31))
+			continue;
+
+		data.period = event->hw.last_period;
+		if (!sparc_perf_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 1, &data, regs))
+			sparc_pmu_disable_event(hwc, idx);
+	}
+
+	return NOTIFY_STOP;
+}
+
+static __read_mostly struct notifier_block perf_event_nmi_notifier = {
+	.notifier_call		= perf_event_nmi_handler,
+};
+
+static bool __init supported_pmu(void)
+{
+	if (!strcmp(sparc_pmu_type, "ultra3i")) {
+		sparc_pmu = &ultra3i_pmu;
+		return true;
+	}
+	if (!strcmp(sparc_pmu_type, "niagara2")) {
+		sparc_pmu = &niagara2_pmu;
+		return true;
+	}
+	return false;
+}
+
+void __init init_hw_perf_events(void)
+{
+	pr_info("Performance events: ");
+
+	if (!supported_pmu()) {
+		pr_cont("No support for PMU type '%s'\n", sparc_pmu_type);
+		return;
+	}
+
+	pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
+
+	/* All sparc64 PMUs currently have 2 events.  But this simple
+	 * driver only supports one active event at a time.
+	 */
+	perf_max_events = 1;
+
+	register_die_notifier(&perf_event_nmi_notifier);
+}
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 04181577cb6..0f1658d3749 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -82,5 +82,5 @@ sys_call_table:
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
 
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 91b06b7f7ac..009825f6e73 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -83,7 +83,7 @@ sys_call_table32:
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
-	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_counter_open
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open
 
 #endif /* CONFIG_COMPAT */
 
@@ -158,4 +158,4 @@ sys_call_table:
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
+	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 51c59015b28..e4ff5d1280c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -24,7 +24,7 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
-	select HAVE_PERF_COUNTERS if (!M386 && !M486)
+	select HAVE_PERF_EVENTS if (!M386 && !M486)
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index ba331bfd111..74619c4f9fd 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -831,5 +831,5 @@ ia32_sys_call_table:
 	.quad compat_sys_preadv
 	.quad compat_sys_pwritev
 	.quad compat_sys_rt_tgsigqueueinfo	/* 335 */
-	.quad sys_perf_counter_open
+	.quad sys_perf_event_open
 ia32_syscall_end:
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index 5e3f2044f0d..f5693c81a1d 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -49,7 +49,7 @@ BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
 BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
 BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
 
-#ifdef CONFIG_PERF_COUNTERS
+#ifdef CONFIG_PERF_EVENTS
 BUILD_INTERRUPT(perf_pending_interrupt, LOCAL_PENDING_VECTOR)
 #endif
 
diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
deleted file mode 100644
index e7b7c938ae2..00000000000
--- a/arch/x86/include/asm/perf_counter.h
+++ /dev/null
@@ -1,108 +0,0 @@
-#ifndef _ASM_X86_PERF_COUNTER_H
-#define _ASM_X86_PERF_COUNTER_H
-
-/*
- * Performance counter hw details:
- */
-
-#define X86_PMC_MAX_GENERIC					8
-#define X86_PMC_MAX_FIXED					3
-
-#define X86_PMC_IDX_GENERIC				        0
-#define X86_PMC_IDX_FIXED				       32
-#define X86_PMC_IDX_MAX					       64
-
-#define MSR_ARCH_PERFMON_PERFCTR0			      0xc1
-#define MSR_ARCH_PERFMON_PERFCTR1			      0xc2
-
-#define MSR_ARCH_PERFMON_EVENTSEL0			     0x186
-#define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
-
-#define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
-#define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
-#define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)
-#define ARCH_PERFMON_EVENTSEL_USR			  (1 << 16)
-
-/*
- * Includes eventsel and unit mask as well:
- */
-#define ARCH_PERFMON_EVENT_MASK				    0xffff
-
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 		 0
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
-		(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
-
-#define ARCH_PERFMON_BRANCH_MISSES_RETIRED			 6
-
-/*
- * Intel "Architectural Performance Monitoring" CPUID
- * detection/enumeration details:
- */
-union cpuid10_eax {
-	struct {
-		unsigned int version_id:8;
-		unsigned int num_counters:8;
-		unsigned int bit_width:8;
-		unsigned int mask_length:8;
-	} split;
-	unsigned int full;
-};
-
-union cpuid10_edx {
-	struct {
-		unsigned int num_counters_fixed:4;
-		unsigned int reserved:28;
-	} split;
-	unsigned int full;
-};
-
-
-/*
- * Fixed-purpose performance counters:
- */
-
-/*
- * All 3 fixed-mode PMCs are configured via this single MSR:
- */
-#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL			0x38d
-
-/*
- * The counts are available in three separate MSRs:
- */
-
-/* Instr_Retired.Any: */
-#define MSR_ARCH_PERFMON_FIXED_CTR0			0x309
-#define X86_PMC_IDX_FIXED_INSTRUCTIONS			(X86_PMC_IDX_FIXED + 0)
-
-/* CPU_CLK_Unhalted.Core: */
-#define MSR_ARCH_PERFMON_FIXED_CTR1			0x30a
-#define X86_PMC_IDX_FIXED_CPU_CYCLES			(X86_PMC_IDX_FIXED + 1)
-
-/* CPU_CLK_Unhalted.Ref: */
-#define MSR_ARCH_PERFMON_FIXED_CTR2			0x30b
-#define X86_PMC_IDX_FIXED_BUS_CYCLES			(X86_PMC_IDX_FIXED + 2)
-
-/*
- * We model BTS tracing as another fixed-mode PMC.
- *
- * We choose a value in the middle of the fixed counter range, since lower
- * values are used by actual fixed counters and higher values are used
- * to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr.
- */
-#define X86_PMC_IDX_FIXED_BTS				(X86_PMC_IDX_FIXED + 16)
-
-
-#ifdef CONFIG_PERF_COUNTERS
-extern void init_hw_perf_counters(void);
-extern void perf_counters_lapic_init(void);
-
-#define PERF_COUNTER_INDEX_OFFSET			0
-
-#else
-static inline void init_hw_perf_counters(void)		{ }
-static inline void perf_counters_lapic_init(void)	{ }
-#endif
-
-#endif /* _ASM_X86_PERF_COUNTER_H */
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
new file mode 100644
index 00000000000..ad7ce3fd506
--- /dev/null
+++ b/arch/x86/include/asm/perf_event.h
@@ -0,0 +1,108 @@
+#ifndef _ASM_X86_PERF_EVENT_H
+#define _ASM_X86_PERF_EVENT_H
+
+/*
+ * Performance event hw details:
+ */
+
+#define X86_PMC_MAX_GENERIC					8
+#define X86_PMC_MAX_FIXED					3
+
+#define X86_PMC_IDX_GENERIC				        0
+#define X86_PMC_IDX_FIXED				       32
+#define X86_PMC_IDX_MAX					       64
+
+#define MSR_ARCH_PERFMON_PERFCTR0			      0xc1
+#define MSR_ARCH_PERFMON_PERFCTR1			      0xc2
+
+#define MSR_ARCH_PERFMON_EVENTSEL0			     0x186
+#define MSR_ARCH_PERFMON_EVENTSEL1			     0x187
+
+#define ARCH_PERFMON_EVENTSEL0_ENABLE			  (1 << 22)
+#define ARCH_PERFMON_EVENTSEL_INT			  (1 << 20)
+#define ARCH_PERFMON_EVENTSEL_OS			  (1 << 17)
+#define ARCH_PERFMON_EVENTSEL_USR			  (1 << 16)
+
+/*
+ * Includes eventsel and unit mask as well:
+ */
+#define ARCH_PERFMON_EVENT_MASK				    0xffff
+
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 		 0
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
+		(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
+
+#define ARCH_PERFMON_BRANCH_MISSES_RETIRED			 6
+
+/*
+ * Intel "Architectural Performance Monitoring" CPUID
+ * detection/enumeration details:
+ */
+union cpuid10_eax {
+	struct {
+		unsigned int version_id:8;
+		unsigned int num_events:8;
+		unsigned int bit_width:8;
+		unsigned int mask_length:8;
+	} split;
+	unsigned int full;
+};
+
+union cpuid10_edx {
+	struct {
+		unsigned int num_events_fixed:4;
+		unsigned int reserved:28;
+	} split;
+	unsigned int full;
+};
+
+
+/*
+ * Fixed-purpose performance events:
+ */
+
+/*
+ * All 3 fixed-mode PMCs are configured via this single MSR:
+ */
+#define MSR_ARCH_PERFMON_FIXED_CTR_CTRL			0x38d
+
+/*
+ * The counts are available in three separate MSRs:
+ */
+
+/* Instr_Retired.Any: */
+#define MSR_ARCH_PERFMON_FIXED_CTR0			0x309
+#define X86_PMC_IDX_FIXED_INSTRUCTIONS			(X86_PMC_IDX_FIXED + 0)
+
+/* CPU_CLK_Unhalted.Core: */
+#define MSR_ARCH_PERFMON_FIXED_CTR1			0x30a
+#define X86_PMC_IDX_FIXED_CPU_CYCLES			(X86_PMC_IDX_FIXED + 1)
+
+/* CPU_CLK_Unhalted.Ref: */
+#define MSR_ARCH_PERFMON_FIXED_CTR2			0x30b
+#define X86_PMC_IDX_FIXED_BUS_CYCLES			(X86_PMC_IDX_FIXED + 2)
+
+/*
+ * We model BTS tracing as another fixed-mode PMC.
+ *
+ * We choose a value in the middle of the fixed event range, since lower
+ * values are used by actual fixed events and higher values are used
+ * to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr.
+ */
+#define X86_PMC_IDX_FIXED_BTS				(X86_PMC_IDX_FIXED + 16)
+
+
+#ifdef CONFIG_PERF_EVENTS
+extern void init_hw_perf_events(void);
+extern void perf_events_lapic_init(void);
+
+#define PERF_EVENT_INDEX_OFFSET			0
+
+#else
+static inline void init_hw_perf_events(void)		{ }
+static inline void perf_events_lapic_init(void)	{ }
+#endif
+
+#endif /* _ASM_X86_PERF_EVENT_H */
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 8deaada61bc..6fb3c209a7e 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -341,7 +341,7 @@
 #define __NR_preadv		333
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
-#define __NR_perf_counter_open	336
+#define __NR_perf_event_open	336
 
 #ifdef __KERNEL__
 
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index b9f3c60de5f..8d3ad0adbc6 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -659,8 +659,8 @@ __SYSCALL(__NR_preadv, sys_preadv)
 __SYSCALL(__NR_pwritev, sys_pwritev)
 #define __NR_rt_tgsigqueueinfo			297
 __SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
-#define __NR_perf_counter_open			298
-__SYSCALL(__NR_perf_counter_open, sys_perf_counter_open)
+#define __NR_perf_event_open			298
+__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a34601f5298..754174d09de 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -14,7 +14,7 @@
  *	Mikael Pettersson	:	PM converted to driver model.
  */
 
-#include <linux/perf_counter.h>
+#include <linux/perf_event.h>
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/acpi_pmtmr.h>
@@ -35,7 +35,7 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 
-#include <asm/perf_counter.h>
+#include <asm/perf_event.h>
 #include <asm/x86_init.h>
 #include <asm/pgalloc.h>
 #include <asm/atomic.h>
@@ -1189,7 +1189,7 @@ void __cpuinit setup_local_APIC(void)
 		apic_write(APIC_ESR, 0);
 	}
 #endif
-	perf_counters_lapic_init();
+	perf_events_lapic_init();
 
 	preempt_disable();
 
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 8dd30638fe4..68537e957a9 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
 obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
 obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
 
-obj-$(CONFIG_PERF_COUNTERS)		+= perf_counter.o
+obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
 
 obj-$(CONFIG_X86_MCE)			+= mcheck/
 obj-$(CONFIG_MTRR)			+= mtrr/
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 2fea97eccf7..cc25c2b4a56 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -13,7 +13,7 @@
 #include <linux/io.h>
 
 #include <asm/stackprotector.h>
-#include <asm/perf_counter.h>
+#include <asm/perf_event.h>
 #include <asm/mmu_context.h>
 #include <asm/hypervisor.h>
 #include <asm/processor.h>
@@ -869,7 +869,7 @@ void __init identify_boot_cpu(void)
 #else
 	vgetcpu_set_mode();
 #endif
-	init_hw_perf_counters();
+	init_hw_perf_events();
 }
 
 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
deleted file mode 100644
index b1f115696c8..00000000000
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ /dev/null
@@ -1,2298 +0,0 @@
-/*
- * Performance counter x86 architecture code
- *
- *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
- *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
- *  Copyright (C) 2009 Jaswinder Singh Rajput
- *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
- *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
- *
- *  For licencing details see kernel-base/COPYING
- */
-
-#include <linux/perf_counter.h>
-#include <linux/capability.h>
-#include <linux/notifier.h>
-#include <linux/hardirq.h>
-#include <linux/kprobes.h>
-#include <linux/module.h>
-#include <linux/kdebug.h>
-#include <linux/sched.h>
-#include <linux/uaccess.h>
-#include <linux/highmem.h>
-#include <linux/cpu.h>
-
-#include <asm/apic.h>
-#include <asm/stacktrace.h>
-#include <asm/nmi.h>
-
-static u64 perf_counter_mask __read_mostly;
-
-/* The maximal number of PEBS counters: */
-#define MAX_PEBS_COUNTERS	4
-
-/* The size of a BTS record in bytes: */
-#define BTS_RECORD_SIZE		24
-
-/* The size of a per-cpu BTS buffer in bytes: */
-#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 2048)
-
-/* The BTS overflow threshold in bytes from the end of the buffer: */
-#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 128)
-
-
-/*
- * Bits in the debugctlmsr controlling branch tracing.
- */
-#define X86_DEBUGCTL_TR			(1 << 6)
-#define X86_DEBUGCTL_BTS		(1 << 7)
-#define X86_DEBUGCTL_BTINT		(1 << 8)
-#define X86_DEBUGCTL_BTS_OFF_OS		(1 << 9)
-#define X86_DEBUGCTL_BTS_OFF_USR	(1 << 10)
-
-/*
- * A debug store configuration.
- *
- * We only support architectures that use 64bit fields.
- */
-struct debug_store {
-	u64	bts_buffer_base;
-	u64	bts_index;
-	u64	bts_absolute_maximum;
-	u64	bts_interrupt_threshold;
-	u64	pebs_buffer_base;
-	u64	pebs_index;
-	u64	pebs_absolute_maximum;
-	u64	pebs_interrupt_threshold;
-	u64	pebs_counter_reset[MAX_PEBS_COUNTERS];
-};
-
-struct cpu_hw_counters {
-	struct perf_counter	*counters[X86_PMC_IDX_MAX];
-	unsigned long		used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
-	unsigned long		active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
-	unsigned long		interrupts;
-	int			enabled;
-	struct debug_store	*ds;
-};
-
-/*
- * struct x86_pmu - generic x86 pmu
- */
-struct x86_pmu {
-	const char	*name;
-	int		version;
-	int		(*handle_irq)(struct pt_regs *);
-	void		(*disable_all)(void);
-	void		(*enable_all)(void);
-	void		(*enable)(struct hw_perf_counter *, int);
-	void		(*disable)(struct hw_perf_counter *, int);
-	unsigned	eventsel;
-	unsigned	perfctr;
-	u64		(*event_map)(int);
-	u64		(*raw_event)(u64);
-	int		max_events;
-	int		num_counters;
-	int		num_counters_fixed;
-	int		counter_bits;
-	u64		counter_mask;
-	int		apic;
-	u64		max_period;
-	u64		intel_ctrl;
-	void		(*enable_bts)(u64 config);
-	void		(*disable_bts)(void);
-};
-
-static struct x86_pmu x86_pmu __read_mostly;
-
-static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = {
-	.enabled = 1,
-};
-
-/*
- * Not sure about some of these
- */
-static const u64 p6_perfmon_event_map[] =
-{
-  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
-  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0f2e,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x012e,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
-  [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
-};
-
-static u64 p6_pmu_event_map(int hw_event)
-{
-	return p6_perfmon_event_map[hw_event];
-}
-
-/*
- * Counter setting that is specified not to count anything.
- * We use this to effectively disable a counter.
- *
- * L2_RQSTS with 0 MESI unit mask.
- */
-#define P6_NOP_COUNTER			0x0000002EULL
-
-static u64 p6_pmu_raw_event(u64 hw_event)
-{
-#define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
-#define P6_EVNTSEL_UNIT_MASK		0x0000FF00ULL
-#define P6_EVNTSEL_EDGE_MASK		0x00040000ULL
-#define P6_EVNTSEL_INV_MASK		0x00800000ULL
-#define P6_EVNTSEL_COUNTER_MASK		0xFF000000ULL
-
-#define P6_EVNTSEL_MASK			\
-	(P6_EVNTSEL_EVENT_MASK |	\
-	 P6_EVNTSEL_UNIT_MASK  |	\
-	 P6_EVNTSEL_EDGE_MASK  |	\
-	 P6_EVNTSEL_INV_MASK   |	\
-	 P6_EVNTSEL_COUNTER_MASK)
-
-	return hw_event & P6_EVNTSEL_MASK;
-}
-
-
-/*
- * Intel PerfMon v3. Used on Core2 and later.
- */
-static const u64 intel_perfmon_event_map[] =
-{
-  [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
-  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x4f2e,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x412e,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
-  [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
-};
-
-static u64 intel_pmu_event_map(int hw_event)
-{
-	return intel_perfmon_event_map[hw_event];
-}
-
-/*
- * Generalized hw caching related hw_event table, filled
- * in on a per model basis. A value of 0 means
- * 'not supported', -1 means 'hw_event makes no sense on
- * this CPU', any other value means the raw hw_event
- * ID.
- */
-
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-static u64 __read_mostly hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX];
-
-static const u64 nehalem_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
-		[ C(RESULT_MISS)   ] = 0x024e, /* L1D_PREFETCH.MISS            */
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                    */
-		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0,
-		[ C(RESULT_MISS)   ] = 0x0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0324, /* L2_RQSTS.LOADS               */
-		[ C(RESULT_MISS)   ] = 0x0224, /* L2_RQSTS.LD_MISS             */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0c24, /* L2_RQSTS.RFOS                */
-		[ C(RESULT_MISS)   ] = 0x0824, /* L2_RQSTS.RFO_MISS            */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f2e, /* LLC Reference                */
-		[ C(RESULT_MISS)   ] = 0x412e, /* LLC Misses                   */
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI   (alias)  */
-		[ C(RESULT_MISS)   ] = 0x0108, /* DTLB_LOAD_MISSES.ANY         */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI   (alias)  */
-		[ C(RESULT_MISS)   ] = 0x010c, /* MEM_STORE_RETIRED.DTLB_MISS  */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0,
-		[ C(RESULT_MISS)   ] = 0x0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x01c0, /* INST_RETIRED.ANY_P           */
-		[ C(RESULT_MISS)   ] = 0x20c8, /* ITLB_MISS_RETIRED            */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
-		[ C(RESULT_MISS)   ] = 0x03e8, /* BPU_CLEARS.ANY               */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-static const u64 core2_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI          */
-		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE       */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI          */
-		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE       */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x104e, /* L1D_PREFETCH.REQUESTS      */
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0080, /* L1I.READS                  */
-		[ C(RESULT_MISS)   ] = 0x0081, /* L1I.MISSES                 */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0208, /* DTLB_MISSES.MISS_LD        */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0808, /* DTLB_MISSES.MISS_ST        */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
-		[ C(RESULT_MISS)   ] = 0x1282, /* ITLBMISSES                 */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
-		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-static const u64 atom_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE.LD               */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE.ST               */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                  */
-		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                 */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
-		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE_LD.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0508, /* DTLB_MISSES.MISS_LD        */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE_ST.MESI  (alias) */
-		[ C(RESULT_MISS)   ] = 0x0608, /* DTLB_MISSES.MISS_ST        */
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
-		[ C(RESULT_MISS)   ] = 0x0282, /* ITLB.MISSES                */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
-		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-static u64 intel_pmu_raw_event(u64 hw_event)
-{
-#define CORE_EVNTSEL_EVENT_MASK		0x000000FFULL
-#define CORE_EVNTSEL_UNIT_MASK		0x0000FF00ULL
-#define CORE_EVNTSEL_EDGE_MASK		0x00040000ULL
-#define CORE_EVNTSEL_INV_MASK		0x00800000ULL
-#define CORE_EVNTSEL_COUNTER_MASK	0xFF000000ULL
-
-#define CORE_EVNTSEL_MASK		\
-	(CORE_EVNTSEL_EVENT_MASK |	\
-	 CORE_EVNTSEL_UNIT_MASK  |	\
-	 CORE_EVNTSEL_EDGE_MASK  |	\
-	 CORE_EVNTSEL_INV_MASK  |	\
-	 CORE_EVNTSEL_COUNTER_MASK)
-
-	return hw_event & CORE_EVNTSEL_MASK;
-}
-
-static const u64 amd_hw_cache_event_ids
-				[PERF_COUNT_HW_CACHE_MAX]
-				[PERF_COUNT_HW_CACHE_OP_MAX]
-				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
-		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0267, /* Data Prefetcher :attempts  */
-		[ C(RESULT_MISS)   ] = 0x0167, /* Data Prefetcher :cancelled */
-	},
- },
- [ C(L1I ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction cache fetches  */
-		[ C(RESULT_MISS)   ] = 0x0081, /* Instruction cache misses   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0x014B, /* Prefetch Instructions :Load */
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(LL  ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x037D, /* Requests to L2 Cache :IC+DC */
-		[ C(RESULT_MISS)   ] = 0x037E, /* L2 Cache Misses : IC+DC     */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x017F, /* L2 Fill/Writeback           */
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(DTLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
-		[ C(RESULT_MISS)   ] = 0x0046, /* L1 DTLB and L2 DLTB Miss   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = 0,
-		[ C(RESULT_MISS)   ] = 0,
-	},
- },
- [ C(ITLB) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction fecthes        */
-		[ C(RESULT_MISS)   ] = 0x0085, /* Instr. fetch ITLB misses   */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
- [ C(BPU ) ] = {
-	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x00c2, /* Retired Branch Instr.      */
-		[ C(RESULT_MISS)   ] = 0x00c3, /* Retired Mispredicted BI    */
-	},
-	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
-	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = -1,
-		[ C(RESULT_MISS)   ] = -1,
-	},
- },
-};
-
-/*
- * AMD Performance Monitor K7 and later.
- */
-static const u64 amd_perfmon_event_map[] =
-{
-  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0076,
-  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
-  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
-  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
-  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
-};
-
-static u64 amd_pmu_event_map(int hw_event)
-{
-	return amd_perfmon_event_map[hw_event];
-}
-
-static u64 amd_pmu_raw_event(u64 hw_event)
-{
-#define K7_EVNTSEL_EVENT_MASK	0x7000000FFULL
-#define K7_EVNTSEL_UNIT_MASK	0x00000FF00ULL
-#define K7_EVNTSEL_EDGE_MASK	0x000040000ULL
-#define K7_EVNTSEL_INV_MASK	0x000800000ULL
-#define K7_EVNTSEL_COUNTER_MASK	0x0FF000000ULL
-
-#define K7_EVNTSEL_MASK			\
-	(K7_EVNTSEL_EVENT_MASK |	\
-	 K7_EVNTSEL_UNIT_MASK  |	\
-	 K7_EVNTSEL_EDGE_MASK  |	\
-	 K7_EVNTSEL_INV_MASK   |	\
-	 K7_EVNTSEL_COUNTER_MASK)
-
-	return hw_event & K7_EVNTSEL_MASK;
-}
-
-/*
- * Propagate counter elapsed time into the generic counter.
- * Can only be executed on the CPU where the counter is active.
- * Returns the delta events processed.
- */
-static u64
-x86_perf_counter_update(struct perf_counter *counter,
-			struct hw_perf_counter *hwc, int idx)
-{
-	int shift = 64 - x86_pmu.counter_bits;
-	u64 prev_raw_count, new_raw_count;
-	s64 delta;
-
-	if (idx == X86_PMC_IDX_FIXED_BTS)
-		return 0;
-
-	/*
-	 * Careful: an NMI might modify the previous counter value.
-	 *
-	 * Our tactic to handle this is to first atomically read and
-	 * exchange a new raw count - then add that new-prev delta
-	 * count to the generic counter atomically:
-	 */
-again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
-	rdmsrl(hwc->counter_base + idx, new_raw_count);
-
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
-					new_raw_count) != prev_raw_count)
-		goto again;
-
-	/*
-	 * Now we have the new raw value and have updated the prev
-	 * timestamp already. We can now calculate the elapsed delta
-	 * (counter-)time and add that to the generic counter.
-	 *
-	 * Careful, not all hw sign-extends above the physical width
-	 * of the count.
-	 */
-	delta = (new_raw_count << shift) - (prev_raw_count << shift);
-	delta >>= shift;
-
-	atomic64_add(delta, &counter->count);
-	atomic64_sub(delta, &hwc->period_left);
-
-	return new_raw_count;
-}
-
-static atomic_t active_counters;
-static DEFINE_MUTEX(pmc_reserve_mutex);
-
-static bool reserve_pmc_hardware(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	int i;
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		disable_lapic_nmi_watchdog();
-
-	for (i = 0; i < x86_pmu.num_counters; i++) {
-		if (!reserve_perfctr_nmi(x86_pmu.perfctr + i))
-			goto perfctr_fail;
-	}
-
-	for (i = 0; i < x86_pmu.num_counters; i++) {
-		if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
-			goto eventsel_fail;
-	}
-#endif
-
-	return true;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-eventsel_fail:
-	for (i--; i >= 0; i--)
-		release_evntsel_nmi(x86_pmu.eventsel + i);
-
-	i = x86_pmu.num_counters;
-
-perfctr_fail:
-	for (i--; i >= 0; i--)
-		release_perfctr_nmi(x86_pmu.perfctr + i);
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
-
-	return false;
-#endif
-}
-
-static void release_pmc_hardware(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	int i;
-
-	for (i = 0; i < x86_pmu.num_counters; i++) {
-		release_perfctr_nmi(x86_pmu.perfctr + i);
-		release_evntsel_nmi(x86_pmu.eventsel + i);
-	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
-#endif
-}
-
-static inline bool bts_available(void)
-{
-	return x86_pmu.enable_bts != NULL;
-}
-
-static inline void init_debug_store_on_cpu(int cpu)
-{
-	struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
-
-	if (!ds)
-		return;
-
-	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
-		     (u32)((u64)(unsigned long)ds),
-		     (u32)((u64)(unsigned long)ds >> 32));
-}
-
-static inline void fini_debug_store_on_cpu(int cpu)
-{
-	if (!per_cpu(cpu_hw_counters, cpu).ds)
-		return;
-
-	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
-}
-
-static void release_bts_hardware(void)
-{
-	int cpu;
-
-	if (!bts_available())
-		return;
-
-	get_online_cpus();
-
-	for_each_online_cpu(cpu)
-		fini_debug_store_on_cpu(cpu);
-
-	for_each_possible_cpu(cpu) {
-		struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
-
-		if (!ds)
-			continue;
-
-		per_cpu(cpu_hw_counters, cpu).ds = NULL;
-
-		kfree((void *)(unsigned long)ds->bts_buffer_base);
-		kfree(ds);
-	}
-
-	put_online_cpus();
-}
-
-static int reserve_bts_hardware(void)
-{
-	int cpu, err = 0;
-
-	if (!bts_available())
-		return 0;
-
-	get_online_cpus();
-
-	for_each_possible_cpu(cpu) {
-		struct debug_store *ds;
-		void *buffer;
-
-		err = -ENOMEM;
-		buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL);
-		if (unlikely(!buffer))
-			break;
-
-		ds = kzalloc(sizeof(*ds), GFP_KERNEL);
-		if (unlikely(!ds)) {
-			kfree(buffer);
-			break;
-		}
-
-		ds->bts_buffer_base = (u64)(unsigned long)buffer;
-		ds->bts_index = ds->bts_buffer_base;
-		ds->bts_absolute_maximum =
-			ds->bts_buffer_base + BTS_BUFFER_SIZE;
-		ds->bts_interrupt_threshold =
-			ds->bts_absolute_maximum - BTS_OVFL_TH;
-
-		per_cpu(cpu_hw_counters, cpu).ds = ds;
-		err = 0;
-	}
-
-	if (err)
-		release_bts_hardware();
-	else {
-		for_each_online_cpu(cpu)
-			init_debug_store_on_cpu(cpu);
-	}
-
-	put_online_cpus();
-
-	return err;
-}
-
-static void hw_perf_counter_destroy(struct perf_counter *counter)
-{
-	if (atomic_dec_and_mutex_lock(&active_counters, &pmc_reserve_mutex)) {
-		release_pmc_hardware();
-		release_bts_hardware();
-		mutex_unlock(&pmc_reserve_mutex);
-	}
-}
-
-static inline int x86_pmu_initialized(void)
-{
-	return x86_pmu.handle_irq != NULL;
-}
-
-static inline int
-set_ext_hw_attr(struct hw_perf_counter *hwc, struct perf_counter_attr *attr)
-{
-	unsigned int cache_type, cache_op, cache_result;
-	u64 config, val;
-
-	config = attr->config;
-
-	cache_type = (config >>  0) & 0xff;
-	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
-		return -EINVAL;
-
-	cache_op = (config >>  8) & 0xff;
-	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
-		return -EINVAL;
-
-	cache_result = (config >> 16) & 0xff;
-	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	val = hw_cache_event_ids[cache_type][cache_op][cache_result];
-
-	if (val == 0)
-		return -ENOENT;
-
-	if (val == -1)
-		return -EINVAL;
-
-	hwc->config |= val;
-
-	return 0;
-}
-
-static void intel_pmu_enable_bts(u64 config)
-{
-	unsigned long debugctlmsr;
-
-	debugctlmsr = get_debugctlmsr();
-
-	debugctlmsr |= X86_DEBUGCTL_TR;
-	debugctlmsr |= X86_DEBUGCTL_BTS;
-	debugctlmsr |= X86_DEBUGCTL_BTINT;
-
-	if (!(config & ARCH_PERFMON_EVENTSEL_OS))
-		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_OS;
-
-	if (!(config & ARCH_PERFMON_EVENTSEL_USR))
-		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_USR;
-
-	update_debugctlmsr(debugctlmsr);
-}
-
-static void intel_pmu_disable_bts(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	unsigned long debugctlmsr;
-
-	if (!cpuc->ds)
-		return;
-
-	debugctlmsr = get_debugctlmsr();
-
-	debugctlmsr &=
-		~(X86_DEBUGCTL_TR | X86_DEBUGCTL_BTS | X86_DEBUGCTL_BTINT |
-		  X86_DEBUGCTL_BTS_OFF_OS | X86_DEBUGCTL_BTS_OFF_USR);
-
-	update_debugctlmsr(debugctlmsr);
-}
-
-/*
- * Setup the hardware configuration for a given attr_type
- */
-static int __hw_perf_counter_init(struct perf_counter *counter)
-{
-	struct perf_counter_attr *attr = &counter->attr;
-	struct hw_perf_counter *hwc = &counter->hw;
-	u64 config;
-	int err;
-
-	if (!x86_pmu_initialized())
-		return -ENODEV;
-
-	err = 0;
-	if (!atomic_inc_not_zero(&active_counters)) {
-		mutex_lock(&pmc_reserve_mutex);
-		if (atomic_read(&active_counters) == 0) {
-			if (!reserve_pmc_hardware())
-				err = -EBUSY;
-			else
-				err = reserve_bts_hardware();
-		}
-		if (!err)
-			atomic_inc(&active_counters);
-		mutex_unlock(&pmc_reserve_mutex);
-	}
-	if (err)
-		return err;
-
-	counter->destroy = hw_perf_counter_destroy;
-
-	/*
-	 * Generate PMC IRQs:
-	 * (keep 'enabled' bit clear for now)
-	 */
-	hwc->config = ARCH_PERFMON_EVENTSEL_INT;
-
-	/*
-	 * Count user and OS events unless requested not to.
-	 */
-	if (!attr->exclude_user)
-		hwc->config |= ARCH_PERFMON_EVENTSEL_USR;
-	if (!attr->exclude_kernel)
-		hwc->config |= ARCH_PERFMON_EVENTSEL_OS;
-
-	if (!hwc->sample_period) {
-		hwc->sample_period = x86_pmu.max_period;
-		hwc->last_period = hwc->sample_period;
-		atomic64_set(&hwc->period_left, hwc->sample_period);
-	} else {
-		/*
-		 * If we have a PMU initialized but no APIC
-		 * interrupts, we cannot sample hardware
-		 * counters (user-space has to fall back and
-		 * sample via a hrtimer based software counter):
-		 */
-		if (!x86_pmu.apic)
-			return -EOPNOTSUPP;
-	}
-
-	/*
-	 * Raw hw_event type provide the config in the hw_event structure
-	 */
-	if (attr->type == PERF_TYPE_RAW) {
-		hwc->config |= x86_pmu.raw_event(attr->config);
-		return 0;
-	}
-
-	if (attr->type == PERF_TYPE_HW_CACHE)
-		return set_ext_hw_attr(hwc, attr);
-
-	if (attr->config >= x86_pmu.max_events)
-		return -EINVAL;
-
-	/*
-	 * The generic map:
-	 */
-	config = x86_pmu.event_map(attr->config);
-
-	if (config == 0)
-		return -ENOENT;
-
-	if (config == -1LL)
-		return -EINVAL;
-
-	/*
-	 * Branch tracing:
-	 */
-	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
-	    (hwc->sample_period == 1)) {
-		/* BTS is not supported by this architecture. */
-		if (!bts_available())
-			return -EOPNOTSUPP;
-
-		/* BTS is currently only allowed for user-mode. */
-		if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
-			return -EOPNOTSUPP;
-	}
-
-	hwc->config |= config;
-
-	return 0;
-}
-
-static void p6_pmu_disable_all(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	u64 val;
-
-	if (!cpuc->enabled)
-		return;
-
-	cpuc->enabled = 0;
-	barrier();
-
-	/* p6 only has one enable register */
-	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
-	wrmsrl(MSR_P6_EVNTSEL0, val);
-}
-
-static void intel_pmu_disable_all(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-
-	if (!cpuc->enabled)
-		return;
-
-	cpuc->enabled = 0;
-	barrier();
-
-	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
-
-	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
-		intel_pmu_disable_bts();
-}
-
-static void amd_pmu_disable_all(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	int idx;
-
-	if (!cpuc->enabled)
-		return;
-
-	cpuc->enabled = 0;
-	/*
-	 * ensure we write the disable before we start disabling the
-	 * counters proper, so that amd_pmu_enable_counter() does the
-	 * right thing.
-	 */
-	barrier();
-
-	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		u64 val;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-		rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
-		if (!(val & ARCH_PERFMON_EVENTSEL0_ENABLE))
-			continue;
-		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
-		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
-	}
-}
-
-void hw_perf_disable(void)
-{
-	if (!x86_pmu_initialized())
-		return;
-	return x86_pmu.disable_all();
-}
-
-static void p6_pmu_enable_all(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	unsigned long val;
-
-	if (cpuc->enabled)
-		return;
-
-	cpuc->enabled = 1;
-	barrier();
-
-	/* p6 only has one enable register */
-	rdmsrl(MSR_P6_EVNTSEL0, val);
-	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-	wrmsrl(MSR_P6_EVNTSEL0, val);
-}
-
-static void intel_pmu_enable_all(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-
-	if (cpuc->enabled)
-		return;
-
-	cpuc->enabled = 1;
-	barrier();
-
-	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
-
-	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
-		struct perf_counter *counter =
-			cpuc->counters[X86_PMC_IDX_FIXED_BTS];
-
-		if (WARN_ON_ONCE(!counter))
-			return;
-
-		intel_pmu_enable_bts(counter->hw.config);
-	}
-}
-
-static void amd_pmu_enable_all(void)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	int idx;
-
-	if (cpuc->enabled)
-		return;
-
-	cpuc->enabled = 1;
-	barrier();
-
-	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		struct perf_counter *counter = cpuc->counters[idx];
-		u64 val;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		val = counter->hw.config;
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
-	}
-}
-
-void hw_perf_enable(void)
-{
-	if (!x86_pmu_initialized())
-		return;
-	x86_pmu.enable_all();
-}
-
-static inline u64 intel_pmu_get_status(void)
-{
-	u64 status;
-
-	rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
-
-	return status;
-}
-
-static inline void intel_pmu_ack_status(u64 ack)
-{
-	wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, ack);
-}
-
-static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	(void)checking_wrmsrl(hwc->config_base + idx,
-			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
-}
-
-static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	(void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
-}
-
-static inline void
-intel_pmu_disable_fixed(struct hw_perf_counter *hwc, int __idx)
-{
-	int idx = __idx - X86_PMC_IDX_FIXED;
-	u64 ctrl_val, mask;
-
-	mask = 0xfULL << (idx * 4);
-
-	rdmsrl(hwc->config_base, ctrl_val);
-	ctrl_val &= ~mask;
-	(void)checking_wrmsrl(hwc->config_base, ctrl_val);
-}
-
-static inline void
-p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	u64 val = P6_NOP_COUNTER;
-
-	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-
-	(void)checking_wrmsrl(hwc->config_base + idx, val);
-}
-
-static inline void
-intel_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
-		intel_pmu_disable_bts();
-		return;
-	}
-
-	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
-		intel_pmu_disable_fixed(hwc, idx);
-		return;
-	}
-
-	x86_pmu_disable_counter(hwc, idx);
-}
-
-static inline void
-amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	x86_pmu_disable_counter(hwc, idx);
-}
-
-static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
-
-/*
- * Set the next IRQ period, based on the hwc->period_left value.
- * To be called with the counter disabled in hw:
- */
-static int
-x86_perf_counter_set_period(struct perf_counter *counter,
-			     struct hw_perf_counter *hwc, int idx)
-{
-	s64 left = atomic64_read(&hwc->period_left);
-	s64 period = hwc->sample_period;
-	int err, ret = 0;
-
-	if (idx == X86_PMC_IDX_FIXED_BTS)
-		return 0;
-
-	/*
-	 * If we are way outside a reasoable range then just skip forward:
-	 */
-	if (unlikely(left <= -period)) {
-		left = period;
-		atomic64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (unlikely(left <= 0)) {
-		left += period;
-		atomic64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-	/*
-	 * Quirk: certain CPUs dont like it if just 1 hw_event is left:
-	 */
-	if (unlikely(left < 2))
-		left = 2;
-
-	if (left > x86_pmu.max_period)
-		left = x86_pmu.max_period;
-
-	per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
-
-	/*
-	 * The hw counter starts counting from this counter offset,
-	 * mark it to be able to extra future deltas:
-	 */
-	atomic64_set(&hwc->prev_count, (u64)-left);
-
-	err = checking_wrmsrl(hwc->counter_base + idx,
-			     (u64)(-left) & x86_pmu.counter_mask);
-
-	perf_counter_update_userpage(counter);
-
-	return ret;
-}
-
-static inline void
-intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx)
-{
-	int idx = __idx - X86_PMC_IDX_FIXED;
-	u64 ctrl_val, bits, mask;
-	int err;
-
-	/*
-	 * Enable IRQ generation (0x8),
-	 * and enable ring-3 counting (0x2) and ring-0 counting (0x1)
-	 * if requested:
-	 */
-	bits = 0x8ULL;
-	if (hwc->config & ARCH_PERFMON_EVENTSEL_USR)
-		bits |= 0x2;
-	if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
-		bits |= 0x1;
-	bits <<= (idx * 4);
-	mask = 0xfULL << (idx * 4);
-
-	rdmsrl(hwc->config_base, ctrl_val);
-	ctrl_val &= ~mask;
-	ctrl_val |= bits;
-	err = checking_wrmsrl(hwc->config_base, ctrl_val);
-}
-
-static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	u64 val;
-
-	val = hwc->config;
-	if (cpuc->enabled)
-		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-
-	(void)checking_wrmsrl(hwc->config_base + idx, val);
-}
-
-
-static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
-		if (!__get_cpu_var(cpu_hw_counters).enabled)
-			return;
-
-		intel_pmu_enable_bts(hwc->config);
-		return;
-	}
-
-	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
-		intel_pmu_enable_fixed(hwc, idx);
-		return;
-	}
-
-	x86_pmu_enable_counter(hwc, idx);
-}
-
-static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-
-	if (cpuc->enabled)
-		x86_pmu_enable_counter(hwc, idx);
-}
-
-static int
-fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
-{
-	unsigned int hw_event;
-
-	hw_event = hwc->config & ARCH_PERFMON_EVENT_MASK;
-
-	if (unlikely((hw_event ==
-		      x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS)) &&
-		     (hwc->sample_period == 1)))
-		return X86_PMC_IDX_FIXED_BTS;
-
-	if (!x86_pmu.num_counters_fixed)
-		return -1;
-
-	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
-		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
-	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
-		return X86_PMC_IDX_FIXED_CPU_CYCLES;
-	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_BUS_CYCLES)))
-		return X86_PMC_IDX_FIXED_BUS_CYCLES;
-
-	return -1;
-}
-
-/*
- * Find a PMC slot for the freshly enabled / scheduled in counter:
- */
-static int x86_pmu_enable(struct perf_counter *counter)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	struct hw_perf_counter *hwc = &counter->hw;
-	int idx;
-
-	idx = fixed_mode_idx(counter, hwc);
-	if (idx == X86_PMC_IDX_FIXED_BTS) {
-		/* BTS is already occupied. */
-		if (test_and_set_bit(idx, cpuc->used_mask))
-			return -EAGAIN;
-
-		hwc->config_base	= 0;
-		hwc->counter_base	= 0;
-		hwc->idx		= idx;
-	} else if (idx >= 0) {
-		/*
-		 * Try to get the fixed counter, if that is already taken
-		 * then try to get a generic counter:
-		 */
-		if (test_and_set_bit(idx, cpuc->used_mask))
-			goto try_generic;
-
-		hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
-		/*
-		 * We set it so that counter_base + idx in wrmsr/rdmsr maps to
-		 * MSR_ARCH_PERFMON_FIXED_CTR0 ... CTR2:
-		 */
-		hwc->counter_base =
-			MSR_ARCH_PERFMON_FIXED_CTR0 - X86_PMC_IDX_FIXED;
-		hwc->idx = idx;
-	} else {
-		idx = hwc->idx;
-		/* Try to get the previous generic counter again */
-		if (test_and_set_bit(idx, cpuc->used_mask)) {
-try_generic:
-			idx = find_first_zero_bit(cpuc->used_mask,
-						  x86_pmu.num_counters);
-			if (idx == x86_pmu.num_counters)
-				return -EAGAIN;
-
-			set_bit(idx, cpuc->used_mask);
-			hwc->idx = idx;
-		}
-		hwc->config_base  = x86_pmu.eventsel;
-		hwc->counter_base = x86_pmu.perfctr;
-	}
-
-	perf_counters_lapic_init();
-
-	x86_pmu.disable(hwc, idx);
-
-	cpuc->counters[idx] = counter;
-	set_bit(idx, cpuc->active_mask);
-
-	x86_perf_counter_set_period(counter, hwc, idx);
-	x86_pmu.enable(hwc, idx);
-
-	perf_counter_update_userpage(counter);
-
-	return 0;
-}
-
-static void x86_pmu_unthrottle(struct perf_counter *counter)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	struct hw_perf_counter *hwc = &counter->hw;
-
-	if (WARN_ON_ONCE(hwc->idx >= X86_PMC_IDX_MAX ||
-				cpuc->counters[hwc->idx] != counter))
-		return;
-
-	x86_pmu.enable(hwc, hwc->idx);
-}
-
-void perf_counter_print_debug(void)
-{
-	u64 ctrl, status, overflow, pmc_ctrl, pmc_count, prev_left, fixed;
-	struct cpu_hw_counters *cpuc;
-	unsigned long flags;
-	int cpu, idx;
-
-	if (!x86_pmu.num_counters)
-		return;
-
-	local_irq_save(flags);
-
-	cpu = smp_processor_id();
-	cpuc = &per_cpu(cpu_hw_counters, cpu);
-
-	if (x86_pmu.version >= 2) {
-		rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, ctrl);
-		rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
-		rdmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, overflow);
-		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR_CTRL, fixed);
-
-		pr_info("\n");
-		pr_info("CPU#%d: ctrl:       %016llx\n", cpu, ctrl);
-		pr_info("CPU#%d: status:     %016llx\n", cpu, status);
-		pr_info("CPU#%d: overflow:   %016llx\n", cpu, overflow);
-		pr_info("CPU#%d: fixed:      %016llx\n", cpu, fixed);
-	}
-	pr_info("CPU#%d: used:       %016llx\n", cpu, *(u64 *)cpuc->used_mask);
-
-	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl);
-		rdmsrl(x86_pmu.perfctr  + idx, pmc_count);
-
-		prev_left = per_cpu(pmc_prev_left[idx], cpu);
-
-		pr_info("CPU#%d:   gen-PMC%d ctrl:  %016llx\n",
-			cpu, idx, pmc_ctrl);
-		pr_info("CPU#%d:   gen-PMC%d count: %016llx\n",
-			cpu, idx, pmc_count);
-		pr_info("CPU#%d:   gen-PMC%d left:  %016llx\n",
-			cpu, idx, prev_left);
-	}
-	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
-		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, pmc_count);
-
-		pr_info("CPU#%d: fixed-PMC%d count: %016llx\n",
-			cpu, idx, pmc_count);
-	}
-	local_irq_restore(flags);
-}
-
-static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc)
-{
-	struct debug_store *ds = cpuc->ds;
-	struct bts_record {
-		u64	from;
-		u64	to;
-		u64	flags;
-	};
-	struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
-	struct bts_record *at, *top;
-	struct perf_output_handle handle;
-	struct perf_event_header header;
-	struct perf_sample_data data;
-	struct pt_regs regs;
-
-	if (!counter)
-		return;
-
-	if (!ds)
-		return;
-
-	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
-	top = (struct bts_record *)(unsigned long)ds->bts_index;
-
-	if (top <= at)
-		return;
-
-	ds->bts_index = ds->bts_buffer_base;
-
-
-	data.period	= counter->hw.last_period;
-	data.addr	= 0;
-	regs.ip		= 0;
-
-	/*
-	 * Prepare a generic sample, i.e. fill in the invariant fields.
-	 * We will overwrite the from and to address before we output
-	 * the sample.
-	 */
-	perf_prepare_sample(&header, &data, counter, &regs);
-
-	if (perf_output_begin(&handle, counter,
-			      header.size * (top - at), 1, 1))
-		return;
-
-	for (; at < top; at++) {
-		data.ip		= at->from;
-		data.addr	= at->to;
-
-		perf_output_sample(&handle, &header, &data, counter);
-	}
-
-	perf_output_end(&handle);
-
-	/* There's new data available. */
-	counter->hw.interrupts++;
-	counter->pending_kill = POLL_IN;
-}
-
-static void x86_pmu_disable(struct perf_counter *counter)
-{
-	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
-	struct hw_perf_counter *hwc = &counter->hw;
-	int idx = hwc->idx;
-
-	/*
-	 * Must be done before we disable, otherwise the nmi handler
-	 * could reenable again:
-	 */
-	clear_bit(idx, cpuc->active_mask);
-	x86_pmu.disable(hwc, idx);
-
-	/*
-	 * Make sure the cleared pointer becomes visible before we
-	 * (potentially) free the counter:
-	 */
-	barrier();
-
-	/*
-	 * Drain the remaining delta count out of a counter
-	 * that we are disabling:
-	 */
-	x86_perf_counter_update(counter, hwc, idx);
-
-	/* Drain the remaining BTS records. */
-	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS))
-		intel_pmu_drain_bts_buffer(cpuc);
-
-	cpuc->counters[idx] = NULL;
-	clear_bit(idx, cpuc->used_mask);
-
-	perf_counter_update_userpage(counter);
-}
-
-/*
- * Save and restart an expired counter. Called by NMI contexts,
- * so it has to be careful about preempting normal counter ops:
- */
-static int intel_pmu_save_and_restart(struct perf_counter *counter)
-{
-	struct hw_perf_counter *hwc = &counter->hw;
-	int idx = hwc->idx;
-	int ret;
-
-	x86_perf_counter_update(counter, hwc, idx);
-	ret = x86_perf_counter_set_period(counter, hwc, idx);
-
-	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
-		intel_pmu_enable_counter(hwc, idx);
-
-	return ret;
-}
-
-static void intel_pmu_reset(void)
-{
-	struct debug_store *ds = __get_cpu_var(cpu_hw_counters).ds;
-	unsigned long flags;
-	int idx;
-
-	if (!x86_pmu.num_counters)
-		return;
-
-	local_irq_save(flags);
-
-	printk("clearing PMU state on CPU#%d\n", smp_processor_id());
-
-	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		checking_wrmsrl(x86_pmu.eventsel + idx, 0ull);
-		checking_wrmsrl(x86_pmu.perfctr  + idx, 0ull);
-	}
-	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
-		checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
-	}
-	if (ds)
-		ds->bts_index = ds->bts_buffer_base;
-
-	local_irq_restore(flags);
-}
-
-static int p6_pmu_handle_irq(struct pt_regs *regs)
-{
-	struct perf_sample_data data;
-	struct cpu_hw_counters *cpuc;
-	struct perf_counter *counter;
-	struct hw_perf_counter *hwc;
-	int idx, handled = 0;
-	u64 val;
-
-	data.addr = 0;
-
-	cpuc = &__get_cpu_var(cpu_hw_counters);
-
-	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		counter = cpuc->counters[idx];
-		hwc = &counter->hw;
-
-		val = x86_perf_counter_update(counter, hwc, idx);
-		if (val & (1ULL << (x86_pmu.counter_bits - 1)))
-			continue;
-
-		/*
-		 * counter overflow
-		 */
-		handled		= 1;
-		data.period	= counter->hw.last_period;
-
-		if (!x86_perf_counter_set_period(counter, hwc, idx))
-			continue;
-
-		if (perf_counter_overflow(counter, 1, &data, regs))
-			p6_pmu_disable_counter(hwc, idx);
-	}
-
-	if (handled)
-		inc_irq_stat(apic_perf_irqs);
-
-	return handled;
-}
-
-/*
- * This handler is triggered by the local APIC, so the APIC IRQ handling
- * rules apply:
- */
-static int intel_pmu_handle_irq(struct pt_regs *regs)
-{
-	struct perf_sample_data data;
-	struct cpu_hw_counters *cpuc;
-	int bit, loops;
-	u64 ack, status;
-
-	data.addr = 0;
-
-	cpuc = &__get_cpu_var(cpu_hw_counters);
-
-	perf_disable();
-	intel_pmu_drain_bts_buffer(cpuc);
-	status = intel_pmu_get_status();
-	if (!status) {
-		perf_enable();
-		return 0;
-	}
-
-	loops = 0;
-again:
-	if (++loops > 100) {
-		WARN_ONCE(1, "perfcounters: irq loop stuck!\n");
-		perf_counter_print_debug();
-		intel_pmu_reset();
-		perf_enable();
-		return 1;
-	}
-
-	inc_irq_stat(apic_perf_irqs);
-	ack = status;
-	for_each_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
-		struct perf_counter *counter = cpuc->counters[bit];
-
-		clear_bit(bit, (unsigned long *) &status);
-		if (!test_bit(bit, cpuc->active_mask))
-			continue;
-
-		if (!intel_pmu_save_and_restart(counter))
-			continue;
-
-		data.period = counter->hw.last_period;
-
-		if (perf_counter_overflow(counter, 1, &data, regs))
-			intel_pmu_disable_counter(&counter->hw, bit);
-	}
-
-	intel_pmu_ack_status(ack);
-
-	/*
-	 * Repeat if there is more work to be done:
-	 */
-	status = intel_pmu_get_status();
-	if (status)
-		goto again;
-
-	perf_enable();
-
-	return 1;
-}
-
-static int amd_pmu_handle_irq(struct pt_regs *regs)
-{
-	struct perf_sample_data data;
-	struct cpu_hw_counters *cpuc;
-	struct perf_counter *counter;
-	struct hw_perf_counter *hwc;
-	int idx, handled = 0;
-	u64 val;
-
-	data.addr = 0;
-
-	cpuc = &__get_cpu_var(cpu_hw_counters);
-
-	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		counter = cpuc->counters[idx];
-		hwc = &counter->hw;
-
-		val = x86_perf_counter_update(counter, hwc, idx);
-		if (val & (1ULL << (x86_pmu.counter_bits - 1)))
-			continue;
-
-		/*
-		 * counter overflow
-		 */
-		handled		= 1;
-		data.period	= counter->hw.last_period;
-
-		if (!x86_perf_counter_set_period(counter, hwc, idx))
-			continue;
-
-		if (perf_counter_overflow(counter, 1, &data, regs))
-			amd_pmu_disable_counter(hwc, idx);
-	}
-
-	if (handled)
-		inc_irq_stat(apic_perf_irqs);
-
-	return handled;
-}
-
-void smp_perf_pending_interrupt(struct pt_regs *regs)
-{
-	irq_enter();
-	ack_APIC_irq();
-	inc_irq_stat(apic_pending_irqs);
-	perf_counter_do_pending();
-	irq_exit();
-}
-
-void set_perf_counter_pending(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
-#endif
-}
-
-void perf_counters_lapic_init(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (!x86_pmu.apic || !x86_pmu_initialized())
-		return;
-
-	/*
-	 * Always use NMI for PMU
-	 */
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-#endif
-}
-
-static int __kprobes
-perf_counter_nmi_handler(struct notifier_block *self,
-			 unsigned long cmd, void *__args)
-{
-	struct die_args *args = __args;
-	struct pt_regs *regs;
-
-	if (!atomic_read(&active_counters))
-		return NOTIFY_DONE;
-
-	switch (cmd) {
-	case DIE_NMI:
-	case DIE_NMI_IPI:
-		break;
-
-	default:
-		return NOTIFY_DONE;
-	}
-
-	regs = args->regs;
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-#endif
-	/*
-	 * Can't rely on the handled return value to say it was our NMI, two
-	 * counters could trigger 'simultaneously' raising two back-to-back NMIs.
-	 *
-	 * If the first NMI handles both, the latter will be empty and daze
-	 * the CPU.
-	 */
-	x86_pmu.handle_irq(regs);
-
-	return NOTIFY_STOP;
-}
-
-static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
-	.notifier_call		= perf_counter_nmi_handler,
-	.next			= NULL,
-	.priority		= 1
-};
-
-static struct x86_pmu p6_pmu = {
-	.name			= "p6",
-	.handle_irq		= p6_pmu_handle_irq,
-	.disable_all		= p6_pmu_disable_all,
-	.enable_all		= p6_pmu_enable_all,
-	.enable			= p6_pmu_enable_counter,
-	.disable		= p6_pmu_disable_counter,
-	.eventsel		= MSR_P6_EVNTSEL0,
-	.perfctr		= MSR_P6_PERFCTR0,
-	.event_map		= p6_pmu_event_map,
-	.raw_event		= p6_pmu_raw_event,
-	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
-	.apic			= 1,
-	.max_period		= (1ULL << 31) - 1,
-	.version		= 0,
-	.num_counters		= 2,
-	/*
-	 * Counters have 40 bits implemented. However they are designed such
-	 * that bits [32-39] are sign extensions of bit 31. As such the
-	 * effective width of a counter for P6-like PMU is 32 bits only.
-	 *
-	 * See IA-32 Intel Architecture Software developer manual Vol 3B
-	 */
-	.counter_bits		= 32,
-	.counter_mask		= (1ULL << 32) - 1,
-};
-
-static struct x86_pmu intel_pmu = {
-	.name			= "Intel",
-	.handle_irq		= intel_pmu_handle_irq,
-	.disable_all		= intel_pmu_disable_all,
-	.enable_all		= intel_pmu_enable_all,
-	.enable			= intel_pmu_enable_counter,
-	.disable		= intel_pmu_disable_counter,
-	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
-	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
-	.event_map		= intel_pmu_event_map,
-	.raw_event		= intel_pmu_raw_event,
-	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
-	.apic			= 1,
-	/*
-	 * Intel PMCs cannot be accessed sanely above 32 bit width,
-	 * so we install an artificial 1<<31 period regardless of
-	 * the generic counter period:
-	 */
-	.max_period		= (1ULL << 31) - 1,
-	.enable_bts		= intel_pmu_enable_bts,
-	.disable_bts		= intel_pmu_disable_bts,
-};
-
-static struct x86_pmu amd_pmu = {
-	.name			= "AMD",
-	.handle_irq		= amd_pmu_handle_irq,
-	.disable_all		= amd_pmu_disable_all,
-	.enable_all		= amd_pmu_enable_all,
-	.enable			= amd_pmu_enable_counter,
-	.disable		= amd_pmu_disable_counter,
-	.eventsel		= MSR_K7_EVNTSEL0,
-	.perfctr		= MSR_K7_PERFCTR0,
-	.event_map		= amd_pmu_event_map,
-	.raw_event		= amd_pmu_raw_event,
-	.max_events		= ARRAY_SIZE(amd_perfmon_event_map),
-	.num_counters		= 4,
-	.counter_bits		= 48,
-	.counter_mask		= (1ULL << 48) - 1,
-	.apic			= 1,
-	/* use highest bit to detect overflow */
-	.max_period		= (1ULL << 47) - 1,
-};
-
-static int p6_pmu_init(void)
-{
-	switch (boot_cpu_data.x86_model) {
-	case 1:
-	case 3:  /* Pentium Pro */
-	case 5:
-	case 6:  /* Pentium II */
-	case 7:
-	case 8:
-	case 11: /* Pentium III */
-		break;
-	case 9:
-	case 13:
-		/* Pentium M */
-		break;
-	default:
-		pr_cont("unsupported p6 CPU model %d ",
-			boot_cpu_data.x86_model);
-		return -ENODEV;
-	}
-
-	x86_pmu = p6_pmu;
-
-	if (!cpu_has_apic) {
-		pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
-		pr_info("no hardware sampling interrupt available.\n");
-		x86_pmu.apic = 0;
-	}
-
-	return 0;
-}
-
-static int intel_pmu_init(void)
-{
-	union cpuid10_edx edx;
-	union cpuid10_eax eax;
-	unsigned int unused;
-	unsigned int ebx;
-	int version;
-
-	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
-		/* check for P6 processor family */
-	   if (boot_cpu_data.x86 == 6) {
-		return p6_pmu_init();
-	   } else {
-		return -ENODEV;
-	   }
-	}
-
-	/*
-	 * Check whether the Architectural PerfMon supports
-	 * Branch Misses Retired hw_event or not.
-	 */
-	cpuid(10, &eax.full, &ebx, &unused, &edx.full);
-	if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
-		return -ENODEV;
-
-	version = eax.split.version_id;
-	if (version < 2)
-		return -ENODEV;
-
-	x86_pmu				= intel_pmu;
-	x86_pmu.version			= version;
-	x86_pmu.num_counters		= eax.split.num_counters;
-	x86_pmu.counter_bits		= eax.split.bit_width;
-	x86_pmu.counter_mask		= (1ULL << eax.split.bit_width) - 1;
-
-	/*
-	 * Quirk: v2 perfmon does not report fixed-purpose counters, so
-	 * assume at least 3 counters:
-	 */
-	x86_pmu.num_counters_fixed	= max((int)edx.split.num_counters_fixed, 3);
-
-	/*
-	 * Install the hw-cache-events table:
-	 */
-	switch (boot_cpu_data.x86_model) {
-	case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
-	case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
-	case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
-	case 29: /* six-core 45 nm xeon "Dunnington" */
-		memcpy(hw_cache_event_ids, core2_hw_cache_event_ids,
-		       sizeof(hw_cache_event_ids));
-
-		pr_cont("Core2 events, ");
-		break;
-	default:
-	case 26:
-		memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
-		       sizeof(hw_cache_event_ids));
-
-		pr_cont("Nehalem/Corei7 events, ");
-		break;
-	case 28:
-		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
-		       sizeof(hw_cache_event_ids));
-
-		pr_cont("Atom events, ");
-		break;
-	}
-	return 0;
-}
-
-static int amd_pmu_init(void)
-{
-	/* Performance-monitoring supported from K7 and later: */
-	if (boot_cpu_data.x86 < 6)
-		return -ENODEV;
-
-	x86_pmu = amd_pmu;
-
-	/* Events are common for all AMDs */
-	memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
-	       sizeof(hw_cache_event_ids));
-
-	return 0;
-}
-
-void __init init_hw_perf_counters(void)
-{
-	int err;
-
-	pr_info("Performance Counters: ");
-
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_INTEL:
-		err = intel_pmu_init();
-		break;
-	case X86_VENDOR_AMD:
-		err = amd_pmu_init();
-		break;
-	default:
-		return;
-	}
-	if (err != 0) {
-		pr_cont("no PMU driver, software counters only.\n");
-		return;
-	}
-
-	pr_cont("%s PMU driver.\n", x86_pmu.name);
-
-	if (x86_pmu.num_counters > X86_PMC_MAX_GENERIC) {
-		WARN(1, KERN_ERR "hw perf counters %d > max(%d), clipping!",
-		     x86_pmu.num_counters, X86_PMC_MAX_GENERIC);
-		x86_pmu.num_counters = X86_PMC_MAX_GENERIC;
-	}
-	perf_counter_mask = (1 << x86_pmu.num_counters) - 1;
-	perf_max_counters = x86_pmu.num_counters;
-
-	if (x86_pmu.num_counters_fixed > X86_PMC_MAX_FIXED) {
-		WARN(1, KERN_ERR "hw perf counters fixed %d > max(%d), clipping!",
-		     x86_pmu.num_counters_fixed, X86_PMC_MAX_FIXED);
-		x86_pmu.num_counters_fixed = X86_PMC_MAX_FIXED;
-	}
-
-	perf_counter_mask |=
-		((1LL << x86_pmu.num_counters_fixed)-1) << X86_PMC_IDX_FIXED;
-	x86_pmu.intel_ctrl = perf_counter_mask;
-
-	perf_counters_lapic_init();
-	register_die_notifier(&perf_counter_nmi_notifier);
-
-	pr_info("... version:                 %d\n",     x86_pmu.version);
-	pr_info("... bit width:               %d\n",     x86_pmu.counter_bits);
-	pr_info("... generic counters:        %d\n",     x86_pmu.num_counters);
-	pr_info("... value mask:              %016Lx\n", x86_pmu.counter_mask);
-	pr_info("... max period:              %016Lx\n", x86_pmu.max_period);
-	pr_info("... fixed-purpose counters:  %d\n",     x86_pmu.num_counters_fixed);
-	pr_info("... counter mask:            %016Lx\n", perf_counter_mask);
-}
-
-static inline void x86_pmu_read(struct perf_counter *counter)
-{
-	x86_perf_counter_update(counter, &counter->hw, counter->hw.idx);
-}
-
-static const struct pmu pmu = {
-	.enable		= x86_pmu_enable,
-	.disable	= x86_pmu_disable,
-	.read		= x86_pmu_read,
-	.unthrottle	= x86_pmu_unthrottle,
-};
-
-const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
-{
-	int err;
-
-	err = __hw_perf_counter_init(counter);
-	if (err) {
-		if (counter->destroy)
-			counter->destroy(counter);
-		return ERR_PTR(err);
-	}
-
-	return &pmu;
-}
-
-/*
- * callchain support
- */
-
-static inline
-void callchain_store(struct perf_callchain_entry *entry, u64 ip)
-{
-	if (entry->nr < PERF_MAX_STACK_DEPTH)
-		entry->ip[entry->nr++] = ip;
-}
-
-static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
-static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry);
-static DEFINE_PER_CPU(int, in_nmi_frame);
-
-
-static void
-backtrace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-	/* Ignore warnings */
-}
-
-static void backtrace_warning(void *data, char *msg)
-{
-	/* Ignore warnings */
-}
-
-static int backtrace_stack(void *data, char *name)
-{
-	per_cpu(in_nmi_frame, smp_processor_id()) =
-			x86_is_stack_id(NMI_STACK, name);
-
-	return 0;
-}
-
-static void backtrace_address(void *data, unsigned long addr, int reliable)
-{
-	struct perf_callchain_entry *entry = data;
-
-	if (per_cpu(in_nmi_frame, smp_processor_id()))
-		return;
-
-	if (reliable)
-		callchain_store(entry, addr);
-}
-
-static const struct stacktrace_ops backtrace_ops = {
-	.warning		= backtrace_warning,
-	.warning_symbol		= backtrace_warning_symbol,
-	.stack			= backtrace_stack,
-	.address		= backtrace_address,
-};
-
-#include "../dumpstack.h"
-
-static void
-perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
-{
-	callchain_store(entry, PERF_CONTEXT_KERNEL);
-	callchain_store(entry, regs->ip);
-
-	dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
-}
-
-/*
- * best effort, GUP based copy_from_user() that assumes IRQ or NMI context
- */
-static unsigned long
-copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
-{
-	unsigned long offset, addr = (unsigned long)from;
-	int type = in_nmi() ? KM_NMI : KM_IRQ0;
-	unsigned long size, len = 0;
-	struct page *page;
-	void *map;
-	int ret;
-
-	do {
-		ret = __get_user_pages_fast(addr, 1, 0, &page);
-		if (!ret)
-			break;
-
-		offset = addr & (PAGE_SIZE - 1);
-		size = min(PAGE_SIZE - offset, n - len);
-
-		map = kmap_atomic(page, type);
-		memcpy(to, map+offset, size);
-		kunmap_atomic(map, type);
-		put_page(page);
-
-		len  += size;
-		to   += size;
-		addr += size;
-
-	} while (len < n);
-
-	return len;
-}
-
-static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
-{
-	unsigned long bytes;
-
-	bytes = copy_from_user_nmi(frame, fp, sizeof(*frame));
-
-	return bytes == sizeof(*frame);
-}
-
-static void
-perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
-{
-	struct stack_frame frame;
-	const void __user *fp;
-
-	if (!user_mode(regs))
-		regs = task_pt_regs(current);
-
-	fp = (void __user *)regs->bp;
-
-	callchain_store(entry, PERF_CONTEXT_USER);
-	callchain_store(entry, regs->ip);
-
-	while (entry->nr < PERF_MAX_STACK_DEPTH) {
-		frame.next_frame	     = NULL;
-		frame.return_address = 0;
-
-		if (!copy_stack_frame(fp, &frame))
-			break;
-
-		if ((unsigned long)fp < regs->sp)
-			break;
-
-		callchain_store(entry, frame.return_address);
-		fp = frame.next_frame;
-	}
-}
-
-static void
-perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry)
-{
-	int is_user;
-
-	if (!regs)
-		return;
-
-	is_user = user_mode(regs);
-
-	if (!current || current->pid == 0)
-		return;
-
-	if (is_user && current->state != TASK_RUNNING)
-		return;
-
-	if (!is_user)
-		perf_callchain_kernel(regs, entry);
-
-	if (current->mm)
-		perf_callchain_user(regs, entry);
-}
-
-struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
-{
-	struct perf_callchain_entry *entry;
-
-	if (in_nmi())
-		entry = &__get_cpu_var(pmc_nmi_entry);
-	else
-		entry = &__get_cpu_var(pmc_irq_entry);
-
-	entry->nr = 0;
-
-	perf_do_callchain(regs, entry);
-
-	return entry;
-}
-
-void hw_perf_counter_setup_online(int cpu)
-{
-	init_debug_store_on_cpu(cpu);
-}
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
new file mode 100644
index 00000000000..0d03629fb1a
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -0,0 +1,2298 @@
+/*
+ * Performance events x86 architecture code
+ *
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
+ *
+ *  For licencing details see kernel-base/COPYING
+ */
+
+#include <linux/perf_event.h>
+#include <linux/capability.h>
+#include <linux/notifier.h>
+#include <linux/hardirq.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/highmem.h>
+#include <linux/cpu.h>
+
+#include <asm/apic.h>
+#include <asm/stacktrace.h>
+#include <asm/nmi.h>
+
+static u64 perf_event_mask __read_mostly;
+
+/* The maximal number of PEBS events: */
+#define MAX_PEBS_EVENTS	4
+
+/* The size of a BTS record in bytes: */
+#define BTS_RECORD_SIZE		24
+
+/* The size of a per-cpu BTS buffer in bytes: */
+#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 2048)
+
+/* The BTS overflow threshold in bytes from the end of the buffer: */
+#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 128)
+
+
+/*
+ * Bits in the debugctlmsr controlling branch tracing.
+ */
+#define X86_DEBUGCTL_TR			(1 << 6)
+#define X86_DEBUGCTL_BTS		(1 << 7)
+#define X86_DEBUGCTL_BTINT		(1 << 8)
+#define X86_DEBUGCTL_BTS_OFF_OS		(1 << 9)
+#define X86_DEBUGCTL_BTS_OFF_USR	(1 << 10)
+
+/*
+ * A debug store configuration.
+ *
+ * We only support architectures that use 64bit fields.
+ */
+struct debug_store {
+	u64	bts_buffer_base;
+	u64	bts_index;
+	u64	bts_absolute_maximum;
+	u64	bts_interrupt_threshold;
+	u64	pebs_buffer_base;
+	u64	pebs_index;
+	u64	pebs_absolute_maximum;
+	u64	pebs_interrupt_threshold;
+	u64	pebs_event_reset[MAX_PEBS_EVENTS];
+};
+
+struct cpu_hw_events {
+	struct perf_event	*events[X86_PMC_IDX_MAX];
+	unsigned long		used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	unsigned long		active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	unsigned long		interrupts;
+	int			enabled;
+	struct debug_store	*ds;
+};
+
+/*
+ * struct x86_pmu - generic x86 pmu
+ */
+struct x86_pmu {
+	const char	*name;
+	int		version;
+	int		(*handle_irq)(struct pt_regs *);
+	void		(*disable_all)(void);
+	void		(*enable_all)(void);
+	void		(*enable)(struct hw_perf_event *, int);
+	void		(*disable)(struct hw_perf_event *, int);
+	unsigned	eventsel;
+	unsigned	perfctr;
+	u64		(*event_map)(int);
+	u64		(*raw_event)(u64);
+	int		max_events;
+	int		num_events;
+	int		num_events_fixed;
+	int		event_bits;
+	u64		event_mask;
+	int		apic;
+	u64		max_period;
+	u64		intel_ctrl;
+	void		(*enable_bts)(u64 config);
+	void		(*disable_bts)(void);
+};
+
+static struct x86_pmu x86_pmu __read_mostly;
+
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
+	.enabled = 1,
+};
+
+/*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0079,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x012e,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x0062,
+};
+
+static u64 p6_pmu_event_map(int hw_event)
+{
+	return p6_perfmon_event_map[hw_event];
+}
+
+/*
+ * Event setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_EVENT			0x0000002EULL
+
+static u64 p6_pmu_raw_event(u64 hw_event)
+{
+#define P6_EVNTSEL_EVENT_MASK		0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK		0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK		0x00040000ULL
+#define P6_EVNTSEL_INV_MASK		0x00800000ULL
+#define P6_EVNTSEL_REG_MASK		0xFF000000ULL
+
+#define P6_EVNTSEL_MASK			\
+	(P6_EVNTSEL_EVENT_MASK |	\
+	 P6_EVNTSEL_UNIT_MASK  |	\
+	 P6_EVNTSEL_EDGE_MASK  |	\
+	 P6_EVNTSEL_INV_MASK   |	\
+	 P6_EVNTSEL_REG_MASK)
+
+	return hw_event & P6_EVNTSEL_MASK;
+}
+
+
+/*
+ * Intel PerfMon v3. Used on Core2 and later.
+ */
+static const u64 intel_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x4f2e,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x412e,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
+};
+
+static u64 intel_pmu_event_map(int hw_event)
+{
+	return intel_perfmon_event_map[hw_event];
+}
+
+/*
+ * Generalized hw caching related hw_event table, filled
+ * in on a per model basis. A value of 0 means
+ * 'not supported', -1 means 'hw_event makes no sense on
+ * this CPU', any other value means the raw hw_event
+ * ID.
+ */
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+static u64 __read_mostly hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX];
+
+static const u64 nehalem_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
+		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
+		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
+		[ C(RESULT_MISS)   ] = 0x024e, /* L1D_PREFETCH.MISS            */
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                    */
+		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0324, /* L2_RQSTS.LOADS               */
+		[ C(RESULT_MISS)   ] = 0x0224, /* L2_RQSTS.LD_MISS             */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0c24, /* L2_RQSTS.RFOS                */
+		[ C(RESULT_MISS)   ] = 0x0824, /* L2_RQSTS.RFO_MISS            */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2e, /* LLC Reference                */
+		[ C(RESULT_MISS)   ] = 0x412e, /* LLC Misses                   */
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI   (alias)  */
+		[ C(RESULT_MISS)   ] = 0x0108, /* DTLB_LOAD_MISSES.ANY         */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI   (alias)  */
+		[ C(RESULT_MISS)   ] = 0x010c, /* MEM_STORE_RETIRED.DTLB_MISS  */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x01c0, /* INST_RETIRED.ANY_P           */
+		[ C(RESULT_MISS)   ] = 0x20c8, /* ITLB_MISS_RETIRED            */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ALL_BRANCHES */
+		[ C(RESULT_MISS)   ] = 0x03e8, /* BPU_CLEARS.ANY               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static const u64 core2_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI          */
+		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE       */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI          */
+		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE       */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x104e, /* L1D_PREFETCH.REQUESTS      */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* L1I.READS                  */
+		[ C(RESULT_MISS)   ] = 0x0081, /* L1I.MISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0208, /* DTLB_MISSES.MISS_LD        */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0808, /* DTLB_MISSES.MISS_ST        */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
+		[ C(RESULT_MISS)   ] = 0x1282, /* ITLBMISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
+		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static const u64 atom_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE.LD               */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE.ST               */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0380, /* L1I.READS                  */
+		[ C(RESULT_MISS)   ] = 0x0280, /* L1I.MISSES                 */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f29, /* L2_LD.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x4129, /* L2_LD.ISTATE               */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x4f2A, /* L2_ST.MESI                 */
+		[ C(RESULT_MISS)   ] = 0x412A, /* L2_ST.ISTATE               */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2140, /* L1D_CACHE_LD.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0508, /* DTLB_MISSES.MISS_LD        */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x2240, /* L1D_CACHE_ST.MESI  (alias) */
+		[ C(RESULT_MISS)   ] = 0x0608, /* DTLB_MISSES.MISS_ST        */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c0, /* INST_RETIRED.ANY_P         */
+		[ C(RESULT_MISS)   ] = 0x0282, /* ITLB.MISSES                */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED.ANY        */
+		[ C(RESULT_MISS)   ] = 0x00c5, /* BP_INST_RETIRED.MISPRED    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+static u64 intel_pmu_raw_event(u64 hw_event)
+{
+#define CORE_EVNTSEL_EVENT_MASK		0x000000FFULL
+#define CORE_EVNTSEL_UNIT_MASK		0x0000FF00ULL
+#define CORE_EVNTSEL_EDGE_MASK		0x00040000ULL
+#define CORE_EVNTSEL_INV_MASK		0x00800000ULL
+#define CORE_EVNTSEL_REG_MASK	0xFF000000ULL
+
+#define CORE_EVNTSEL_MASK		\
+	(CORE_EVNTSEL_EVENT_MASK |	\
+	 CORE_EVNTSEL_UNIT_MASK  |	\
+	 CORE_EVNTSEL_EDGE_MASK  |	\
+	 CORE_EVNTSEL_INV_MASK  |	\
+	 CORE_EVNTSEL_REG_MASK)
+
+	return hw_event & CORE_EVNTSEL_MASK;
+}
+
+static const u64 amd_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
+		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0267, /* Data Prefetcher :attempts  */
+		[ C(RESULT_MISS)   ] = 0x0167, /* Data Prefetcher :cancelled */
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction cache fetches  */
+		[ C(RESULT_MISS)   ] = 0x0081, /* Instruction cache misses   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x014B, /* Prefetch Instructions :Load */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x037D, /* Requests to L2 Cache :IC+DC */
+		[ C(RESULT_MISS)   ] = 0x037E, /* L2 Cache Misses : IC+DC     */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x017F, /* L2 Fill/Writeback           */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
+		[ C(RESULT_MISS)   ] = 0x0046, /* L1 DTLB and L2 DLTB Miss   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0080, /* Instruction fecthes        */
+		[ C(RESULT_MISS)   ] = 0x0085, /* Instr. fetch ITLB misses   */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x00c2, /* Retired Branch Instr.      */
+		[ C(RESULT_MISS)   ] = 0x00c3, /* Retired Mispredicted BI    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+/*
+ * AMD Performance Monitor K7 and later.
+ */
+static const u64 amd_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x0076,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0080,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0081,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x00c5,
+};
+
+static u64 amd_pmu_event_map(int hw_event)
+{
+	return amd_perfmon_event_map[hw_event];
+}
+
+static u64 amd_pmu_raw_event(u64 hw_event)
+{
+#define K7_EVNTSEL_EVENT_MASK	0x7000000FFULL
+#define K7_EVNTSEL_UNIT_MASK	0x00000FF00ULL
+#define K7_EVNTSEL_EDGE_MASK	0x000040000ULL
+#define K7_EVNTSEL_INV_MASK	0x000800000ULL
+#define K7_EVNTSEL_REG_MASK	0x0FF000000ULL
+
+#define K7_EVNTSEL_MASK			\
+	(K7_EVNTSEL_EVENT_MASK |	\
+	 K7_EVNTSEL_UNIT_MASK  |	\
+	 K7_EVNTSEL_EDGE_MASK  |	\
+	 K7_EVNTSEL_INV_MASK   |	\
+	 K7_EVNTSEL_REG_MASK)
+
+	return hw_event & K7_EVNTSEL_MASK;
+}
+
+/*
+ * Propagate event elapsed time into the generic event.
+ * Can only be executed on the CPU where the event is active.
+ * Returns the delta events processed.
+ */
+static u64
+x86_perf_event_update(struct perf_event *event,
+			struct hw_perf_event *hwc, int idx)
+{
+	int shift = 64 - x86_pmu.event_bits;
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+
+	if (idx == X86_PMC_IDX_FIXED_BTS)
+		return 0;
+
+	/*
+	 * Careful: an NMI might modify the previous event value.
+	 *
+	 * Our tactic to handle this is to first atomically read and
+	 * exchange a new raw count - then add that new-prev delta
+	 * count to the generic event atomically:
+	 */
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	rdmsrl(hwc->event_base + idx, new_raw_count);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+					new_raw_count) != prev_raw_count)
+		goto again;
+
+	/*
+	 * Now we have the new raw value and have updated the prev
+	 * timestamp already. We can now calculate the elapsed delta
+	 * (event-)time and add that to the generic event.
+	 *
+	 * Careful, not all hw sign-extends above the physical width
+	 * of the count.
+	 */
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static atomic_t active_events;
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+static bool reserve_pmc_hardware(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int i;
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		disable_lapic_nmi_watchdog();
+
+	for (i = 0; i < x86_pmu.num_events; i++) {
+		if (!reserve_perfctr_nmi(x86_pmu.perfctr + i))
+			goto perfctr_fail;
+	}
+
+	for (i = 0; i < x86_pmu.num_events; i++) {
+		if (!reserve_evntsel_nmi(x86_pmu.eventsel + i))
+			goto eventsel_fail;
+	}
+#endif
+
+	return true;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+eventsel_fail:
+	for (i--; i >= 0; i--)
+		release_evntsel_nmi(x86_pmu.eventsel + i);
+
+	i = x86_pmu.num_events;
+
+perfctr_fail:
+	for (i--; i >= 0; i--)
+		release_perfctr_nmi(x86_pmu.perfctr + i);
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		enable_lapic_nmi_watchdog();
+
+	return false;
+#endif
+}
+
+static void release_pmc_hardware(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int i;
+
+	for (i = 0; i < x86_pmu.num_events; i++) {
+		release_perfctr_nmi(x86_pmu.perfctr + i);
+		release_evntsel_nmi(x86_pmu.eventsel + i);
+	}
+
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		enable_lapic_nmi_watchdog();
+#endif
+}
+
+static inline bool bts_available(void)
+{
+	return x86_pmu.enable_bts != NULL;
+}
+
+static inline void init_debug_store_on_cpu(int cpu)
+{
+	struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
+
+	if (!ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
+		     (u32)((u64)(unsigned long)ds),
+		     (u32)((u64)(unsigned long)ds >> 32));
+}
+
+static inline void fini_debug_store_on_cpu(int cpu)
+{
+	if (!per_cpu(cpu_hw_events, cpu).ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
+}
+
+static void release_bts_hardware(void)
+{
+	int cpu;
+
+	if (!bts_available())
+		return;
+
+	get_online_cpus();
+
+	for_each_online_cpu(cpu)
+		fini_debug_store_on_cpu(cpu);
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
+
+		if (!ds)
+			continue;
+
+		per_cpu(cpu_hw_events, cpu).ds = NULL;
+
+		kfree((void *)(unsigned long)ds->bts_buffer_base);
+		kfree(ds);
+	}
+
+	put_online_cpus();
+}
+
+static int reserve_bts_hardware(void)
+{
+	int cpu, err = 0;
+
+	if (!bts_available())
+		return 0;
+
+	get_online_cpus();
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds;
+		void *buffer;
+
+		err = -ENOMEM;
+		buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL);
+		if (unlikely(!buffer))
+			break;
+
+		ds = kzalloc(sizeof(*ds), GFP_KERNEL);
+		if (unlikely(!ds)) {
+			kfree(buffer);
+			break;
+		}
+
+		ds->bts_buffer_base = (u64)(unsigned long)buffer;
+		ds->bts_index = ds->bts_buffer_base;
+		ds->bts_absolute_maximum =
+			ds->bts_buffer_base + BTS_BUFFER_SIZE;
+		ds->bts_interrupt_threshold =
+			ds->bts_absolute_maximum - BTS_OVFL_TH;
+
+		per_cpu(cpu_hw_events, cpu).ds = ds;
+		err = 0;
+	}
+
+	if (err)
+		release_bts_hardware();
+	else {
+		for_each_online_cpu(cpu)
+			init_debug_store_on_cpu(cpu);
+	}
+
+	put_online_cpus();
+
+	return err;
+}
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	if (atomic_dec_and_mutex_lock(&active_events, &pmc_reserve_mutex)) {
+		release_pmc_hardware();
+		release_bts_hardware();
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+}
+
+static inline int x86_pmu_initialized(void)
+{
+	return x86_pmu.handle_irq != NULL;
+}
+
+static inline int
+set_ext_hw_attr(struct hw_perf_event *hwc, struct perf_event_attr *attr)
+{
+	unsigned int cache_type, cache_op, cache_result;
+	u64 config, val;
+
+	config = attr->config;
+
+	cache_type = (config >>  0) & 0xff;
+	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+		return -EINVAL;
+
+	cache_op = (config >>  8) & 0xff;
+	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+		return -EINVAL;
+
+	cache_result = (config >> 16) & 0xff;
+	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+		return -EINVAL;
+
+	val = hw_cache_event_ids[cache_type][cache_op][cache_result];
+
+	if (val == 0)
+		return -ENOENT;
+
+	if (val == -1)
+		return -EINVAL;
+
+	hwc->config |= val;
+
+	return 0;
+}
+
+static void intel_pmu_enable_bts(u64 config)
+{
+	unsigned long debugctlmsr;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr |= X86_DEBUGCTL_TR;
+	debugctlmsr |= X86_DEBUGCTL_BTS;
+	debugctlmsr |= X86_DEBUGCTL_BTINT;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_OS))
+		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_OS;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_USR))
+		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_USR;
+
+	update_debugctlmsr(debugctlmsr);
+}
+
+static void intel_pmu_disable_bts(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	unsigned long debugctlmsr;
+
+	if (!cpuc->ds)
+		return;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr &=
+		~(X86_DEBUGCTL_TR | X86_DEBUGCTL_BTS | X86_DEBUGCTL_BTINT |
+		  X86_DEBUGCTL_BTS_OFF_OS | X86_DEBUGCTL_BTS_OFF_USR);
+
+	update_debugctlmsr(debugctlmsr);
+}
+
+/*
+ * Setup the hardware configuration for a given attr_type
+ */
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	u64 config;
+	int err;
+
+	if (!x86_pmu_initialized())
+		return -ENODEV;
+
+	err = 0;
+	if (!atomic_inc_not_zero(&active_events)) {
+		mutex_lock(&pmc_reserve_mutex);
+		if (atomic_read(&active_events) == 0) {
+			if (!reserve_pmc_hardware())
+				err = -EBUSY;
+			else
+				err = reserve_bts_hardware();
+		}
+		if (!err)
+			atomic_inc(&active_events);
+		mutex_unlock(&pmc_reserve_mutex);
+	}
+	if (err)
+		return err;
+
+	event->destroy = hw_perf_event_destroy;
+
+	/*
+	 * Generate PMC IRQs:
+	 * (keep 'enabled' bit clear for now)
+	 */
+	hwc->config = ARCH_PERFMON_EVENTSEL_INT;
+
+	/*
+	 * Count user and OS events unless requested not to.
+	 */
+	if (!attr->exclude_user)
+		hwc->config |= ARCH_PERFMON_EVENTSEL_USR;
+	if (!attr->exclude_kernel)
+		hwc->config |= ARCH_PERFMON_EVENTSEL_OS;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = x86_pmu.max_period;
+		hwc->last_period = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	} else {
+		/*
+		 * If we have a PMU initialized but no APIC
+		 * interrupts, we cannot sample hardware
+		 * events (user-space has to fall back and
+		 * sample via a hrtimer based software event):
+		 */
+		if (!x86_pmu.apic)
+			return -EOPNOTSUPP;
+	}
+
+	/*
+	 * Raw hw_event type provide the config in the hw_event structure
+	 */
+	if (attr->type == PERF_TYPE_RAW) {
+		hwc->config |= x86_pmu.raw_event(attr->config);
+		return 0;
+	}
+
+	if (attr->type == PERF_TYPE_HW_CACHE)
+		return set_ext_hw_attr(hwc, attr);
+
+	if (attr->config >= x86_pmu.max_events)
+		return -EINVAL;
+
+	/*
+	 * The generic map:
+	 */
+	config = x86_pmu.event_map(attr->config);
+
+	if (config == 0)
+		return -ENOENT;
+
+	if (config == -1LL)
+		return -EINVAL;
+
+	/*
+	 * Branch tracing:
+	 */
+	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
+	    (hwc->sample_period == 1)) {
+		/* BTS is not supported by this architecture. */
+		if (!bts_available())
+			return -EOPNOTSUPP;
+
+		/* BTS is currently only allowed for user-mode. */
+		if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+			return -EOPNOTSUPP;
+	}
+
+	hwc->config |= config;
+
+	return 0;
+}
+
+static void p6_pmu_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	barrier();
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
+static void intel_pmu_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	barrier();
+
+	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
+		intel_pmu_disable_bts();
+}
+
+static void amd_pmu_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int idx;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	/*
+	 * ensure we write the disable before we start disabling the
+	 * events proper, so that amd_pmu_enable_event() does the
+	 * right thing.
+	 */
+	barrier();
+
+	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+		u64 val;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
+		if (!(val & ARCH_PERFMON_EVENTSEL0_ENABLE))
+			continue;
+		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
+	}
+}
+
+void hw_perf_disable(void)
+{
+	if (!x86_pmu_initialized())
+		return;
+	return x86_pmu.disable_all();
+}
+
+static void p6_pmu_enable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	unsigned long val;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	/* p6 only has one enable register */
+	rdmsrl(MSR_P6_EVNTSEL0, val);
+	val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+	wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
+static void intel_pmu_enable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
+		struct perf_event *event =
+			cpuc->events[X86_PMC_IDX_FIXED_BTS];
+
+		if (WARN_ON_ONCE(!event))
+			return;
+
+		intel_pmu_enable_bts(event->hw.config);
+	}
+}
+
+static void amd_pmu_enable_all(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int idx;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+		struct perf_event *event = cpuc->events[idx];
+		u64 val;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		val = event->hw.config;
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
+	}
+}
+
+void hw_perf_enable(void)
+{
+	if (!x86_pmu_initialized())
+		return;
+	x86_pmu.enable_all();
+}
+
+static inline u64 intel_pmu_get_status(void)
+{
+	u64 status;
+
+	rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+
+	return status;
+}
+
+static inline void intel_pmu_ack_status(u64 ack)
+{
+	wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, ack);
+}
+
+static inline void x86_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	(void)checking_wrmsrl(hwc->config_base + idx,
+			      hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
+}
+
+static inline void x86_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	(void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
+}
+
+static inline void
+intel_pmu_disable_fixed(struct hw_perf_event *hwc, int __idx)
+{
+	int idx = __idx - X86_PMC_IDX_FIXED;
+	u64 ctrl_val, mask;
+
+	mask = 0xfULL << (idx * 4);
+
+	rdmsrl(hwc->config_base, ctrl_val);
+	ctrl_val &= ~mask;
+	(void)checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+p6_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val = P6_NOP_EVENT;
+
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+static inline void
+intel_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		intel_pmu_disable_bts();
+		return;
+	}
+
+	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
+		intel_pmu_disable_fixed(hwc, idx);
+		return;
+	}
+
+	x86_pmu_disable_event(hwc, idx);
+}
+
+static inline void
+amd_pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	x86_pmu_disable_event(hwc, idx);
+}
+
+static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
+
+/*
+ * Set the next IRQ period, based on the hwc->period_left value.
+ * To be called with the event disabled in hw:
+ */
+static int
+x86_perf_event_set_period(struct perf_event *event,
+			     struct hw_perf_event *hwc, int idx)
+{
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int err, ret = 0;
+
+	if (idx == X86_PMC_IDX_FIXED_BTS)
+		return 0;
+
+	/*
+	 * If we are way outside a reasoable range then just skip forward:
+	 */
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+	/*
+	 * Quirk: certain CPUs dont like it if just 1 hw_event is left:
+	 */
+	if (unlikely(left < 2))
+		left = 2;
+
+	if (left > x86_pmu.max_period)
+		left = x86_pmu.max_period;
+
+	per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
+
+	/*
+	 * The hw event starts counting from this event offset,
+	 * mark it to be able to extra future deltas:
+	 */
+	atomic64_set(&hwc->prev_count, (u64)-left);
+
+	err = checking_wrmsrl(hwc->event_base + idx,
+			     (u64)(-left) & x86_pmu.event_mask);
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+static inline void
+intel_pmu_enable_fixed(struct hw_perf_event *hwc, int __idx)
+{
+	int idx = __idx - X86_PMC_IDX_FIXED;
+	u64 ctrl_val, bits, mask;
+	int err;
+
+	/*
+	 * Enable IRQ generation (0x8),
+	 * and enable ring-3 counting (0x2) and ring-0 counting (0x1)
+	 * if requested:
+	 */
+	bits = 0x8ULL;
+	if (hwc->config & ARCH_PERFMON_EVENTSEL_USR)
+		bits |= 0x2;
+	if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+		bits |= 0x1;
+	bits <<= (idx * 4);
+	mask = 0xfULL << (idx * 4);
+
+	rdmsrl(hwc->config_base, ctrl_val);
+	ctrl_val &= ~mask;
+	ctrl_val |= bits;
+	err = checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static void p6_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	u64 val;
+
+	val = hwc->config;
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+	(void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+
+static void intel_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		if (!__get_cpu_var(cpu_hw_events).enabled)
+			return;
+
+		intel_pmu_enable_bts(hwc->config);
+		return;
+	}
+
+	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
+		intel_pmu_enable_fixed(hwc, idx);
+		return;
+	}
+
+	x86_pmu_enable_event(hwc, idx);
+}
+
+static void amd_pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->enabled)
+		x86_pmu_enable_event(hwc, idx);
+}
+
+static int
+fixed_mode_idx(struct perf_event *event, struct hw_perf_event *hwc)
+{
+	unsigned int hw_event;
+
+	hw_event = hwc->config & ARCH_PERFMON_EVENT_MASK;
+
+	if (unlikely((hw_event ==
+		      x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS)) &&
+		     (hwc->sample_period == 1)))
+		return X86_PMC_IDX_FIXED_BTS;
+
+	if (!x86_pmu.num_events_fixed)
+		return -1;
+
+	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
+		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
+	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
+		return X86_PMC_IDX_FIXED_CPU_CYCLES;
+	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_BUS_CYCLES)))
+		return X86_PMC_IDX_FIXED_BUS_CYCLES;
+
+	return -1;
+}
+
+/*
+ * Find a PMC slot for the freshly enabled / scheduled in event:
+ */
+static int x86_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	idx = fixed_mode_idx(event, hwc);
+	if (idx == X86_PMC_IDX_FIXED_BTS) {
+		/* BTS is already occupied. */
+		if (test_and_set_bit(idx, cpuc->used_mask))
+			return -EAGAIN;
+
+		hwc->config_base	= 0;
+		hwc->event_base	= 0;
+		hwc->idx		= idx;
+	} else if (idx >= 0) {
+		/*
+		 * Try to get the fixed event, if that is already taken
+		 * then try to get a generic event:
+		 */
+		if (test_and_set_bit(idx, cpuc->used_mask))
+			goto try_generic;
+
+		hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
+		/*
+		 * We set it so that event_base + idx in wrmsr/rdmsr maps to
+		 * MSR_ARCH_PERFMON_FIXED_CTR0 ... CTR2:
+		 */
+		hwc->event_base =
+			MSR_ARCH_PERFMON_FIXED_CTR0 - X86_PMC_IDX_FIXED;
+		hwc->idx = idx;
+	} else {
+		idx = hwc->idx;
+		/* Try to get the previous generic event again */
+		if (test_and_set_bit(idx, cpuc->used_mask)) {
+try_generic:
+			idx = find_first_zero_bit(cpuc->used_mask,
+						  x86_pmu.num_events);
+			if (idx == x86_pmu.num_events)
+				return -EAGAIN;
+
+			set_bit(idx, cpuc->used_mask);
+			hwc->idx = idx;
+		}
+		hwc->config_base  = x86_pmu.eventsel;
+		hwc->event_base = x86_pmu.perfctr;
+	}
+
+	perf_events_lapic_init();
+
+	x86_pmu.disable(hwc, idx);
+
+	cpuc->events[idx] = event;
+	set_bit(idx, cpuc->active_mask);
+
+	x86_perf_event_set_period(event, hwc, idx);
+	x86_pmu.enable(hwc, idx);
+
+	perf_event_update_userpage(event);
+
+	return 0;
+}
+
+static void x86_pmu_unthrottle(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+
+	if (WARN_ON_ONCE(hwc->idx >= X86_PMC_IDX_MAX ||
+				cpuc->events[hwc->idx] != event))
+		return;
+
+	x86_pmu.enable(hwc, hwc->idx);
+}
+
+void perf_event_print_debug(void)
+{
+	u64 ctrl, status, overflow, pmc_ctrl, pmc_count, prev_left, fixed;
+	struct cpu_hw_events *cpuc;
+	unsigned long flags;
+	int cpu, idx;
+
+	if (!x86_pmu.num_events)
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+	cpuc = &per_cpu(cpu_hw_events, cpu);
+
+	if (x86_pmu.version >= 2) {
+		rdmsrl(MSR_CORE_PERF_GLOBAL_CTRL, ctrl);
+		rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, status);
+		rdmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, overflow);
+		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR_CTRL, fixed);
+
+		pr_info("\n");
+		pr_info("CPU#%d: ctrl:       %016llx\n", cpu, ctrl);
+		pr_info("CPU#%d: status:     %016llx\n", cpu, status);
+		pr_info("CPU#%d: overflow:   %016llx\n", cpu, overflow);
+		pr_info("CPU#%d: fixed:      %016llx\n", cpu, fixed);
+	}
+	pr_info("CPU#%d: used:       %016llx\n", cpu, *(u64 *)cpuc->used_mask);
+
+	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+		rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl);
+		rdmsrl(x86_pmu.perfctr  + idx, pmc_count);
+
+		prev_left = per_cpu(pmc_prev_left[idx], cpu);
+
+		pr_info("CPU#%d:   gen-PMC%d ctrl:  %016llx\n",
+			cpu, idx, pmc_ctrl);
+		pr_info("CPU#%d:   gen-PMC%d count: %016llx\n",
+			cpu, idx, pmc_count);
+		pr_info("CPU#%d:   gen-PMC%d left:  %016llx\n",
+			cpu, idx, prev_left);
+	}
+	for (idx = 0; idx < x86_pmu.num_events_fixed; idx++) {
+		rdmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, pmc_count);
+
+		pr_info("CPU#%d: fixed-PMC%d count: %016llx\n",
+			cpu, idx, pmc_count);
+	}
+	local_irq_restore(flags);
+}
+
+static void intel_pmu_drain_bts_buffer(struct cpu_hw_events *cpuc)
+{
+	struct debug_store *ds = cpuc->ds;
+	struct bts_record {
+		u64	from;
+		u64	to;
+		u64	flags;
+	};
+	struct perf_event *event = cpuc->events[X86_PMC_IDX_FIXED_BTS];
+	struct bts_record *at, *top;
+	struct perf_output_handle handle;
+	struct perf_event_header header;
+	struct perf_sample_data data;
+	struct pt_regs regs;
+
+	if (!event)
+		return;
+
+	if (!ds)
+		return;
+
+	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
+	top = (struct bts_record *)(unsigned long)ds->bts_index;
+
+	if (top <= at)
+		return;
+
+	ds->bts_index = ds->bts_buffer_base;
+
+
+	data.period	= event->hw.last_period;
+	data.addr	= 0;
+	regs.ip		= 0;
+
+	/*
+	 * Prepare a generic sample, i.e. fill in the invariant fields.
+	 * We will overwrite the from and to address before we output
+	 * the sample.
+	 */
+	perf_prepare_sample(&header, &data, event, &regs);
+
+	if (perf_output_begin(&handle, event,
+			      header.size * (top - at), 1, 1))
+		return;
+
+	for (; at < top; at++) {
+		data.ip		= at->from;
+		data.addr	= at->to;
+
+		perf_output_sample(&handle, &header, &data, event);
+	}
+
+	perf_output_end(&handle);
+
+	/* There's new data available. */
+	event->hw.interrupts++;
+	event->pending_kill = POLL_IN;
+}
+
+static void x86_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	/*
+	 * Must be done before we disable, otherwise the nmi handler
+	 * could reenable again:
+	 */
+	clear_bit(idx, cpuc->active_mask);
+	x86_pmu.disable(hwc, idx);
+
+	/*
+	 * Make sure the cleared pointer becomes visible before we
+	 * (potentially) free the event:
+	 */
+	barrier();
+
+	/*
+	 * Drain the remaining delta count out of a event
+	 * that we are disabling:
+	 */
+	x86_perf_event_update(event, hwc, idx);
+
+	/* Drain the remaining BTS records. */
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS))
+		intel_pmu_drain_bts_buffer(cpuc);
+
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
+/*
+ * Save and restart an expired event. Called by NMI contexts,
+ * so it has to be careful about preempting normal event ops:
+ */
+static int intel_pmu_save_and_restart(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+	int ret;
+
+	x86_perf_event_update(event, hwc, idx);
+	ret = x86_perf_event_set_period(event, hwc, idx);
+
+	if (event->state == PERF_EVENT_STATE_ACTIVE)
+		intel_pmu_enable_event(hwc, idx);
+
+	return ret;
+}
+
+static void intel_pmu_reset(void)
+{
+	struct debug_store *ds = __get_cpu_var(cpu_hw_events).ds;
+	unsigned long flags;
+	int idx;
+
+	if (!x86_pmu.num_events)
+		return;
+
+	local_irq_save(flags);
+
+	printk("clearing PMU state on CPU#%d\n", smp_processor_id());
+
+	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+		checking_wrmsrl(x86_pmu.eventsel + idx, 0ull);
+		checking_wrmsrl(x86_pmu.perfctr  + idx, 0ull);
+	}
+	for (idx = 0; idx < x86_pmu.num_events_fixed; idx++) {
+		checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
+	}
+	if (ds)
+		ds->bts_index = ds->bts_buffer_base;
+
+	local_irq_restore(flags);
+}
+
+static int p6_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int idx, handled = 0;
+	u64 val;
+
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+
+	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		event = cpuc->events[idx];
+		hwc = &event->hw;
+
+		val = x86_perf_event_update(event, hwc, idx);
+		if (val & (1ULL << (x86_pmu.event_bits - 1)))
+			continue;
+
+		/*
+		 * event overflow
+		 */
+		handled		= 1;
+		data.period	= event->hw.last_period;
+
+		if (!x86_perf_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 1, &data, regs))
+			p6_pmu_disable_event(hwc, idx);
+	}
+
+	if (handled)
+		inc_irq_stat(apic_perf_irqs);
+
+	return handled;
+}
+
+/*
+ * This handler is triggered by the local APIC, so the APIC IRQ handling
+ * rules apply:
+ */
+static int intel_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	int bit, loops;
+	u64 ack, status;
+
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+
+	perf_disable();
+	intel_pmu_drain_bts_buffer(cpuc);
+	status = intel_pmu_get_status();
+	if (!status) {
+		perf_enable();
+		return 0;
+	}
+
+	loops = 0;
+again:
+	if (++loops > 100) {
+		WARN_ONCE(1, "perfevents: irq loop stuck!\n");
+		perf_event_print_debug();
+		intel_pmu_reset();
+		perf_enable();
+		return 1;
+	}
+
+	inc_irq_stat(apic_perf_irqs);
+	ack = status;
+	for_each_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
+		struct perf_event *event = cpuc->events[bit];
+
+		clear_bit(bit, (unsigned long *) &status);
+		if (!test_bit(bit, cpuc->active_mask))
+			continue;
+
+		if (!intel_pmu_save_and_restart(event))
+			continue;
+
+		data.period = event->hw.last_period;
+
+		if (perf_event_overflow(event, 1, &data, regs))
+			intel_pmu_disable_event(&event->hw, bit);
+	}
+
+	intel_pmu_ack_status(ack);
+
+	/*
+	 * Repeat if there is more work to be done:
+	 */
+	status = intel_pmu_get_status();
+	if (status)
+		goto again;
+
+	perf_enable();
+
+	return 1;
+}
+
+static int amd_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int idx, handled = 0;
+	u64 val;
+
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+
+	for (idx = 0; idx < x86_pmu.num_events; idx++) {
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		event = cpuc->events[idx];
+		hwc = &event->hw;
+
+		val = x86_perf_event_update(event, hwc, idx);
+		if (val & (1ULL << (x86_pmu.event_bits - 1)))
+			continue;
+
+		/*
+		 * event overflow
+		 */
+		handled		= 1;
+		data.period	= event->hw.last_period;
+
+		if (!x86_perf_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 1, &data, regs))
+			amd_pmu_disable_event(hwc, idx);
+	}
+
+	if (handled)
+		inc_irq_stat(apic_perf_irqs);
+
+	return handled;
+}
+
+void smp_perf_pending_interrupt(struct pt_regs *regs)
+{
+	irq_enter();
+	ack_APIC_irq();
+	inc_irq_stat(apic_pending_irqs);
+	perf_event_do_pending();
+	irq_exit();
+}
+
+void set_perf_event_pending(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
+#endif
+}
+
+void perf_events_lapic_init(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (!x86_pmu.apic || !x86_pmu_initialized())
+		return;
+
+	/*
+	 * Always use NMI for PMU
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
+}
+
+static int __kprobes
+perf_event_nmi_handler(struct notifier_block *self,
+			 unsigned long cmd, void *__args)
+{
+	struct die_args *args = __args;
+	struct pt_regs *regs;
+
+	if (!atomic_read(&active_events))
+		return NOTIFY_DONE;
+
+	switch (cmd) {
+	case DIE_NMI:
+	case DIE_NMI_IPI:
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	regs = args->regs;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+#endif
+	/*
+	 * Can't rely on the handled return value to say it was our NMI, two
+	 * events could trigger 'simultaneously' raising two back-to-back NMIs.
+	 *
+	 * If the first NMI handles both, the latter will be empty and daze
+	 * the CPU.
+	 */
+	x86_pmu.handle_irq(regs);
+
+	return NOTIFY_STOP;
+}
+
+static __read_mostly struct notifier_block perf_event_nmi_notifier = {
+	.notifier_call		= perf_event_nmi_handler,
+	.next			= NULL,
+	.priority		= 1
+};
+
+static struct x86_pmu p6_pmu = {
+	.name			= "p6",
+	.handle_irq		= p6_pmu_handle_irq,
+	.disable_all		= p6_pmu_disable_all,
+	.enable_all		= p6_pmu_enable_all,
+	.enable			= p6_pmu_enable_event,
+	.disable		= p6_pmu_disable_event,
+	.eventsel		= MSR_P6_EVNTSEL0,
+	.perfctr		= MSR_P6_PERFCTR0,
+	.event_map		= p6_pmu_event_map,
+	.raw_event		= p6_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(p6_perfmon_event_map),
+	.apic			= 1,
+	.max_period		= (1ULL << 31) - 1,
+	.version		= 0,
+	.num_events		= 2,
+	/*
+	 * Events have 40 bits implemented. However they are designed such
+	 * that bits [32-39] are sign extensions of bit 31. As such the
+	 * effective width of a event for P6-like PMU is 32 bits only.
+	 *
+	 * See IA-32 Intel Architecture Software developer manual Vol 3B
+	 */
+	.event_bits		= 32,
+	.event_mask		= (1ULL << 32) - 1,
+};
+
+static struct x86_pmu intel_pmu = {
+	.name			= "Intel",
+	.handle_irq		= intel_pmu_handle_irq,
+	.disable_all		= intel_pmu_disable_all,
+	.enable_all		= intel_pmu_enable_all,
+	.enable			= intel_pmu_enable_event,
+	.disable		= intel_pmu_disable_event,
+	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
+	.perfctr		= MSR_ARCH_PERFMON_PERFCTR0,
+	.event_map		= intel_pmu_event_map,
+	.raw_event		= intel_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(intel_perfmon_event_map),
+	.apic			= 1,
+	/*
+	 * Intel PMCs cannot be accessed sanely above 32 bit width,
+	 * so we install an artificial 1<<31 period regardless of
+	 * the generic event period:
+	 */
+	.max_period		= (1ULL << 31) - 1,
+	.enable_bts		= intel_pmu_enable_bts,
+	.disable_bts		= intel_pmu_disable_bts,
+};
+
+static struct x86_pmu amd_pmu = {
+	.name			= "AMD",
+	.handle_irq		= amd_pmu_handle_irq,
+	.disable_all		= amd_pmu_disable_all,
+	.enable_all		= amd_pmu_enable_all,
+	.enable			= amd_pmu_enable_event,
+	.disable		= amd_pmu_disable_event,
+	.eventsel		= MSR_K7_EVNTSEL0,
+	.perfctr		= MSR_K7_PERFCTR0,
+	.event_map		= amd_pmu_event_map,
+	.raw_event		= amd_pmu_raw_event,
+	.max_events		= ARRAY_SIZE(amd_perfmon_event_map),
+	.num_events		= 4,
+	.event_bits		= 48,
+	.event_mask		= (1ULL << 48) - 1,
+	.apic			= 1,
+	/* use highest bit to detect overflow */
+	.max_period		= (1ULL << 47) - 1,
+};
+
+static int p6_pmu_init(void)
+{
+	switch (boot_cpu_data.x86_model) {
+	case 1:
+	case 3:  /* Pentium Pro */
+	case 5:
+	case 6:  /* Pentium II */
+	case 7:
+	case 8:
+	case 11: /* Pentium III */
+		break;
+	case 9:
+	case 13:
+		/* Pentium M */
+		break;
+	default:
+		pr_cont("unsupported p6 CPU model %d ",
+			boot_cpu_data.x86_model);
+		return -ENODEV;
+	}
+
+	x86_pmu = p6_pmu;
+
+	if (!cpu_has_apic) {
+		pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n");
+		pr_info("no hardware sampling interrupt available.\n");
+		x86_pmu.apic = 0;
+	}
+
+	return 0;
+}
+
+static int intel_pmu_init(void)
+{
+	union cpuid10_edx edx;
+	union cpuid10_eax eax;
+	unsigned int unused;
+	unsigned int ebx;
+	int version;
+
+	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+		/* check for P6 processor family */
+	   if (boot_cpu_data.x86 == 6) {
+		return p6_pmu_init();
+	   } else {
+		return -ENODEV;
+	   }
+	}
+
+	/*
+	 * Check whether the Architectural PerfMon supports
+	 * Branch Misses Retired hw_event or not.
+	 */
+	cpuid(10, &eax.full, &ebx, &unused, &edx.full);
+	if (eax.split.mask_length <= ARCH_PERFMON_BRANCH_MISSES_RETIRED)
+		return -ENODEV;
+
+	version = eax.split.version_id;
+	if (version < 2)
+		return -ENODEV;
+
+	x86_pmu				= intel_pmu;
+	x86_pmu.version			= version;
+	x86_pmu.num_events		= eax.split.num_events;
+	x86_pmu.event_bits		= eax.split.bit_width;
+	x86_pmu.event_mask		= (1ULL << eax.split.bit_width) - 1;
+
+	/*
+	 * Quirk: v2 perfmon does not report fixed-purpose events, so
+	 * assume at least 3 events:
+	 */
+	x86_pmu.num_events_fixed	= max((int)edx.split.num_events_fixed, 3);
+
+	/*
+	 * Install the hw-cache-events table:
+	 */
+	switch (boot_cpu_data.x86_model) {
+	case 15: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
+	case 22: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
+	case 23: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
+	case 29: /* six-core 45 nm xeon "Dunnington" */
+		memcpy(hw_cache_event_ids, core2_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		pr_cont("Core2 events, ");
+		break;
+	default:
+	case 26:
+		memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		pr_cont("Nehalem/Corei7 events, ");
+		break;
+	case 28:
+		memcpy(hw_cache_event_ids, atom_hw_cache_event_ids,
+		       sizeof(hw_cache_event_ids));
+
+		pr_cont("Atom events, ");
+		break;
+	}
+	return 0;
+}
+
+static int amd_pmu_init(void)
+{
+	/* Performance-monitoring supported from K7 and later: */
+	if (boot_cpu_data.x86 < 6)
+		return -ENODEV;
+
+	x86_pmu = amd_pmu;
+
+	/* Events are common for all AMDs */
+	memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
+	       sizeof(hw_cache_event_ids));
+
+	return 0;
+}
+
+void __init init_hw_perf_events(void)
+{
+	int err;
+
+	pr_info("Performance Events: ");
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		err = intel_pmu_init();
+		break;
+	case X86_VENDOR_AMD:
+		err = amd_pmu_init();
+		break;
+	default:
+		return;
+	}
+	if (err != 0) {
+		pr_cont("no PMU driver, software events only.\n");
+		return;
+	}
+
+	pr_cont("%s PMU driver.\n", x86_pmu.name);
+
+	if (x86_pmu.num_events > X86_PMC_MAX_GENERIC) {
+		WARN(1, KERN_ERR "hw perf events %d > max(%d), clipping!",
+		     x86_pmu.num_events, X86_PMC_MAX_GENERIC);
+		x86_pmu.num_events = X86_PMC_MAX_GENERIC;
+	}
+	perf_event_mask = (1 << x86_pmu.num_events) - 1;
+	perf_max_events = x86_pmu.num_events;
+
+	if (x86_pmu.num_events_fixed > X86_PMC_MAX_FIXED) {
+		WARN(1, KERN_ERR "hw perf events fixed %d > max(%d), clipping!",
+		     x86_pmu.num_events_fixed, X86_PMC_MAX_FIXED);
+		x86_pmu.num_events_fixed = X86_PMC_MAX_FIXED;
+	}
+
+	perf_event_mask |=
+		((1LL << x86_pmu.num_events_fixed)-1) << X86_PMC_IDX_FIXED;
+	x86_pmu.intel_ctrl = perf_event_mask;
+
+	perf_events_lapic_init();
+	register_die_notifier(&perf_event_nmi_notifier);
+
+	pr_info("... version:                 %d\n",     x86_pmu.version);
+	pr_info("... bit width:               %d\n",     x86_pmu.event_bits);
+	pr_info("... generic events:        %d\n",     x86_pmu.num_events);
+	pr_info("... value mask:              %016Lx\n", x86_pmu.event_mask);
+	pr_info("... max period:              %016Lx\n", x86_pmu.max_period);
+	pr_info("... fixed-purpose events:  %d\n",     x86_pmu.num_events_fixed);
+	pr_info("... event mask:            %016Lx\n", perf_event_mask);
+}
+
+static inline void x86_pmu_read(struct perf_event *event)
+{
+	x86_perf_event_update(event, &event->hw, event->hw.idx);
+}
+
+static const struct pmu pmu = {
+	.enable		= x86_pmu_enable,
+	.disable	= x86_pmu_disable,
+	.read		= x86_pmu_read,
+	.unthrottle	= x86_pmu_unthrottle,
+};
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	int err;
+
+	err = __hw_perf_event_init(event);
+	if (err) {
+		if (event->destroy)
+			event->destroy(event);
+		return ERR_PTR(err);
+	}
+
+	return &pmu;
+}
+
+/*
+ * callchain support
+ */
+
+static inline
+void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+	if (entry->nr < PERF_MAX_STACK_DEPTH)
+		entry->ip[entry->nr++] = ip;
+}
+
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry);
+static DEFINE_PER_CPU(int, in_nmi_frame);
+
+
+static void
+backtrace_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+	/* Ignore warnings */
+}
+
+static void backtrace_warning(void *data, char *msg)
+{
+	/* Ignore warnings */
+}
+
+static int backtrace_stack(void *data, char *name)
+{
+	per_cpu(in_nmi_frame, smp_processor_id()) =
+			x86_is_stack_id(NMI_STACK, name);
+
+	return 0;
+}
+
+static void backtrace_address(void *data, unsigned long addr, int reliable)
+{
+	struct perf_callchain_entry *entry = data;
+
+	if (per_cpu(in_nmi_frame, smp_processor_id()))
+		return;
+
+	if (reliable)
+		callchain_store(entry, addr);
+}
+
+static const struct stacktrace_ops backtrace_ops = {
+	.warning		= backtrace_warning,
+	.warning_symbol		= backtrace_warning_symbol,
+	.stack			= backtrace_stack,
+	.address		= backtrace_address,
+};
+
+#include "../dumpstack.h"
+
+static void
+perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	callchain_store(entry, regs->ip);
+
+	dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
+}
+
+/*
+ * best effort, GUP based copy_from_user() that assumes IRQ or NMI context
+ */
+static unsigned long
+copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long offset, addr = (unsigned long)from;
+	int type = in_nmi() ? KM_NMI : KM_IRQ0;
+	unsigned long size, len = 0;
+	struct page *page;
+	void *map;
+	int ret;
+
+	do {
+		ret = __get_user_pages_fast(addr, 1, 0, &page);
+		if (!ret)
+			break;
+
+		offset = addr & (PAGE_SIZE - 1);
+		size = min(PAGE_SIZE - offset, n - len);
+
+		map = kmap_atomic(page, type);
+		memcpy(to, map+offset, size);
+		kunmap_atomic(map, type);
+		put_page(page);
+
+		len  += size;
+		to   += size;
+		addr += size;
+
+	} while (len < n);
+
+	return len;
+}
+
+static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
+{
+	unsigned long bytes;
+
+	bytes = copy_from_user_nmi(frame, fp, sizeof(*frame));
+
+	return bytes == sizeof(*frame);
+}
+
+static void
+perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	struct stack_frame frame;
+	const void __user *fp;
+
+	if (!user_mode(regs))
+		regs = task_pt_regs(current);
+
+	fp = (void __user *)regs->bp;
+
+	callchain_store(entry, PERF_CONTEXT_USER);
+	callchain_store(entry, regs->ip);
+
+	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		frame.next_frame	     = NULL;
+		frame.return_address = 0;
+
+		if (!copy_stack_frame(fp, &frame))
+			break;
+
+		if ((unsigned long)fp < regs->sp)
+			break;
+
+		callchain_store(entry, frame.return_address);
+		fp = frame.next_frame;
+	}
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+	int is_user;
+
+	if (!regs)
+		return;
+
+	is_user = user_mode(regs);
+
+	if (!current || current->pid == 0)
+		return;
+
+	if (is_user && current->state != TASK_RUNNING)
+		return;
+
+	if (!is_user)
+		perf_callchain_kernel(regs, entry);
+
+	if (current->mm)
+		perf_callchain_user(regs, entry);
+}
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry;
+
+	if (in_nmi())
+		entry = &__get_cpu_var(pmc_nmi_entry);
+	else
+		entry = &__get_cpu_var(pmc_irq_entry);
+
+	entry->nr = 0;
+
+	perf_do_callchain(regs, entry);
+
+	return entry;
+}
+
+void hw_perf_event_setup_online(int cpu)
+{
+	init_debug_store_on_cpu(cpu);
+}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 392bea43b89..fab786f60ed 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -20,7 +20,7 @@
 #include <linux/kprobes.h>
 
 #include <asm/apic.h>
-#include <asm/perf_counter.h>
+#include <asm/perf_event.h>
 
 struct nmi_watchdog_ctlblk {
 	unsigned int cccr_msr;
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index d59fe323807..681c3fda739 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1021,7 +1021,7 @@ apicinterrupt ERROR_APIC_VECTOR \
 apicinterrupt SPURIOUS_APIC_VECTOR \
 	spurious_interrupt smp_spurious_interrupt
 
-#ifdef CONFIG_PERF_COUNTERS
+#ifdef CONFIG_PERF_EVENTS
 apicinterrupt LOCAL_PENDING_VECTOR \
 	perf_pending_interrupt smp_perf_pending_interrupt
 #endif
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 300883112e3..40f30773fb2 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -208,7 +208,7 @@ static void __init apic_intr_init(void)
 	alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
 
 	/* Performance monitoring interrupts: */
-# ifdef CONFIG_PERF_COUNTERS
+# ifdef CONFIG_PERF_EVENTS
 	alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt);
 # endif
 
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index d51321ddafd..0157cd26d7c 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -335,4 +335,4 @@ ENTRY(sys_call_table)
 	.long sys_preadv
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
-	.long sys_perf_counter_open
+	.long sys_perf_event_open
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 775a020990a..82728f2c6d5 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -10,7 +10,7 @@
 #include <linux/bootmem.h>		/* max_low_pfn			*/
 #include <linux/kprobes.h>		/* __kprobes, ...		*/
 #include <linux/mmiotrace.h>		/* kmmio_handler, ...		*/
-#include <linux/perf_counter.h>		/* perf_swcounter_event		*/
+#include <linux/perf_event.h>		/* perf_sw_event		*/
 
 #include <asm/traps.h>			/* dotraplinkage, ...		*/
 #include <asm/pgalloc.h>		/* pgd_*(), ...			*/
@@ -1017,7 +1017,7 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	if (unlikely(error_code & PF_RSVD))
 		pgtable_bad(regs, error_code, address);
 
-	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt, have no user context or are running
@@ -1114,11 +1114,11 @@ good_area:
 
 	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
 				     regs, address);
 	} else {
 		tsk->min_flt++;
-		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
 				     regs, address);
 	}
 
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 4899215999d..8eb05878554 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -234,11 +234,11 @@ static void arch_perfmon_setup_counters(void)
 	if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
 		current_cpu_data.x86_model == 15) {
 		eax.split.version_id = 2;
-		eax.split.num_counters = 2;
+		eax.split.num_events = 2;
 		eax.split.bit_width = 40;
 	}
 
-	num_counters = eax.split.num_counters;
+	num_counters = eax.split.num_events;
 
 	op_arch_perfmon_spec.num_counters = num_counters;
 	op_arch_perfmon_spec.num_controls = num_counters;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index b83776180c7..7b8e75d1608 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -13,7 +13,7 @@
 #define OP_X86_MODEL_H
 
 #include <asm/types.h>
-#include <asm/perf_counter.h>
+#include <asm/perf_event.h>
 
 struct op_msr {
 	unsigned long	addr;
-- 
cgit v1.2.3


From 8cc11f5ab5384dad6c63905f71882e65cd70b7b7 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Sun, 6 Sep 2009 23:10:10 -0400
Subject: microblaze: Cleanup linker script using new linker script macros.

I wasn't able to further clean up the linker script using the
INIT_DATA_SECTION macro because of the FIXME comment for the
.init.ramfs section; when that is resolved we should convert
microblaze to use INIT_DATA_SECTION.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/vmlinux.lds.S | 39 ++++++++----------------------------
 1 file changed, 8 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index ec5fa91a48d..b76c17c9ae4 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -13,6 +13,8 @@ OUTPUT_ARCH(microblaze)
 ENTRY(_start)
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
 
 jiffies = jiffies_64 + 4;
 
@@ -39,12 +41,7 @@ SECTIONS {
 
 	. = ALIGN(16);
 	RODATA
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/*
 	 * sdata2 section can go anywhere, but must be word aligned
@@ -61,12 +58,7 @@ SECTIONS {
 	}
 
 	_sdata = . ;
-	.data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
-		DATA_DATA
-		CONSTRUCTORS
-	}
-	. = ALIGN(32);
-	.data.cacheline_aligned : { *(.data.cacheline_aligned) }
+	RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
 	_edata = . ;
 
 	/* Reserve some low RAM for r0 based memory references */
@@ -74,10 +66,6 @@ SECTIONS {
 	r0_ram = . ;
 	. = . +  4096;	/* a page should be enough */
 
-	/* The initial task */
-	. = ALIGN(8192);
-	.data.init_task : { *(.data.init_task) }
-
 	/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
 	. = ALIGN(8);
 	.sdata : {
@@ -96,12 +84,7 @@ SECTIONS {
 
 	__init_begin = .;
 
-	. = ALIGN(4096);
-	.init.text : {
-		_sinittext = . ;
-		INIT_TEXT
-		_einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 
 	.init.data : {
 		INIT_DATA
@@ -115,21 +98,15 @@ SECTIONS {
 	}
 
 	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
+		INIT_SETUP(0)
 	}
 
 	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
+		INIT_CALLS
 	}
 
 	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 
 	SECURITY_INIT
-- 
cgit v1.2.3


From 2622434ee0108c65808a63f067e72d0bbc75b372 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 30 Jul 2009 14:31:23 +0200
Subject: microblaze: Add checking mechanism for MSR instruction

It was necessary to use fourth parameter(r8) in early_printk
to show messages on console.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/setup.h |  2 +-
 arch/microblaze/kernel/head.S       | 17 +++++++++++++++--
 arch/microblaze/kernel/setup.c      | 12 +++++++++++-
 3 files changed, 27 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index 27f8dafd8c3..ed67c9ed15b 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -38,7 +38,7 @@ extern void early_console_reg_tlb_alloc(unsigned int addr);
 void time_init(void);
 void init_IRQ(void);
 void machine_early_init(const char *cmdline, unsigned int ram,
-						unsigned int fdt);
+			unsigned int fdt, unsigned int msr);
 
 void machine_restart(char *cmd);
 void machine_shutdown(void);
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index e41c6ce2a7b..bfc7ea801cc 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -55,6 +55,19 @@ ENTRY(_start)
 	andi	r1, r1, ~2
 	mts	rmsr, r1
 
+/*
+ * Here is checking mechanism which check if Microblaze has msr instructions
+ * We load msr and compare it with previous r1 value - if is the same,
+ * msr instructions works if not - cpu don't have them.
+ */
+	or	r8, r0, r0 /* 0 - I have msr instr, 1 - I don't have */
+	or	r12, r0, r0
+	msrset	r12, 0	/* set nothing - just read msr for test */
+	cmpu	r12, r12, r1
+	beqi	r12, 1f
+	ori	r8, r0, 1 /* I don't have msr */
+1:
+
 /* r7 may point to an FDT, or there may be one linked in.
    if it's in r7, we've got to save it away ASAP.
    We ensure r7 points to a valid FDT, just in case the bootloader
@@ -209,8 +222,8 @@ start_here:
 	 * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for
 	 * the function.
 	 */
-	la	r8, r0, machine_early_init
-	brald	r15, r8
+	la	r9, r0, machine_early_init
+	brald	r15, r9
 	nop
 
 #ifndef CONFIG_MMU
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 2a97bf513b6..8c1e0f4dcf1 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -94,7 +94,7 @@ inline unsigned get_romfs_len(unsigned *addr)
 #endif	/* CONFIG_MTD_UCLINUX_EBSS */
 
 void __init machine_early_init(const char *cmdline, unsigned int ram,
-		unsigned int fdt)
+		unsigned int fdt, unsigned int msr)
 {
 	unsigned long *src, *dst = (unsigned long *)0x0;
 
@@ -157,6 +157,16 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
 
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+	if (msr)
+		early_printk("!!!Your kernel has setup MSR instruction but "
+				"CPU don't have it %d\n", msr);
+#else
+	if (!msr)
+		early_printk("!!!Your kernel not setup MSR instruction but "
+				"CPU have it %d\n", msr);
+#endif
+
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)
 		*dst = *src;
 
-- 
cgit v1.2.3


From 9002062ff52696888847224a778a3279bc8c1cb5 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 31 Aug 2009 16:24:56 +0200
Subject: microblaze: Improve checking mechanism for MSR instruction

It is more safe to use clear instead of msrset.
We save some instructions too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/head.S | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index bfc7ea801cc..697ce3007f3 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -54,19 +54,16 @@ ENTRY(_start)
 	mfs	r1, rmsr
 	andi	r1, r1, ~2
 	mts	rmsr, r1
-
 /*
  * Here is checking mechanism which check if Microblaze has msr instructions
  * We load msr and compare it with previous r1 value - if is the same,
  * msr instructions works if not - cpu don't have them.
  */
-	or	r8, r0, r0 /* 0 - I have msr instr, 1 - I don't have */
-	or	r12, r0, r0
-	msrset	r12, 0	/* set nothing - just read msr for test */
-	cmpu	r12, r12, r1
-	beqi	r12, 1f
-	ori	r8, r0, 1 /* I don't have msr */
-1:
+	/* r8=0 - I have msr instr, 1 - I don't have them */
+	rsubi	r0, r0, 1	/* set the carry bit */
+	msrclr	r0, 0x4		/* try to clear it */
+	/* read the carry bit, r8 will be '0' if msrclr exists */
+	addik	r8, r0, 0
 
 /* r7 may point to an FDT, or there may be one linked in.
    if it's in r7, we've got to save it away ASAP.
-- 
cgit v1.2.3


From d5b37092aae1edaa638b156b16d09854ad6a1ec0 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 24 Aug 2009 13:25:16 +0200
Subject: microblaze: Implement include/asm/syscall.h.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/syscall.h | 99 +++++++++++++++++++++++++++++++++++
 1 file changed, 99 insertions(+)
 create mode 100644 arch/microblaze/include/asm/syscall.h

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/syscall.h b/arch/microblaze/include/asm/syscall.h
new file mode 100644
index 00000000000..048dfcd8d89
--- /dev/null
+++ b/arch/microblaze/include/asm/syscall.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_MICROBLAZE_SYSCALL_H
+#define __ASM_MICROBLAZE_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R12 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->r12;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* TODO.  */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r3;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->r3 = -error;
+	else
+		regs->r3 = val;
+}
+
+static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs,
+							  unsigned int n)
+{
+	switch (n) {
+	case 5: return regs->r10;
+	case 4: return regs->r9;
+	case 3: return regs->r8;
+	case 2: return regs->r7;
+	case 1: return regs->r6;
+	case 0: return regs->r5;
+	default:
+		BUG();
+	}
+	return ~0;
+}
+
+static inline void microblaze_set_syscall_arg(struct pt_regs *regs,
+					      unsigned int n,
+					      unsigned long val)
+{
+	switch (n) {
+	case 5:
+		regs->r10 = val;
+	case 4:
+		regs->r9 = val;
+	case 3:
+		regs->r8 = val;
+	case 2:
+		regs->r7 = val;
+	case 1:
+		regs->r6 = val;
+	case 0:
+		regs->r5 = val;
+	default:
+		BUG();
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	while (n--)
+		*args++ = microblaze_get_syscall_arg(regs, i++);
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	while (n--)
+		microblaze_set_syscall_arg(regs, i++, *args++);
+}
+
+#endif /* __ASM_MICROBLAZE_SYSCALL_H */
-- 
cgit v1.2.3


From 57c0c15b5244320065374ad2c54f4fbec77a6428 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 21 Sep 2009 12:20:38 +0200
Subject: perf: Tidy up after the big rename

 - provide compatibility Kconfig entry for existing PERF_COUNTERS .config's

 - provide courtesy copy of old perf_counter.h, for user-space projects

 - small indentation fixups

 - fix up MAINTAINERS

 - fix small x86 printout fallout

 - fix up small PowerPC comment fallout (use 'counter' as in register)

Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/include/asm/paca.h  |  2 +-
 arch/powerpc/kernel/perf_event.c | 12 ++++++------
 arch/x86/kernel/cpu/perf_event.c | 14 +++++++-------
 3 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 154f405b642..7d8514cecea 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -122,7 +122,7 @@ struct paca_struct {
 	u8 soft_enabled;		/* irq soft-enable flag */
 	u8 hard_enabled;		/* set if irqs are enabled in MSR */
 	u8 io_sync;			/* writel() needs spin_unlock sync */
-	u8 perf_event_pending;	/* PM interrupt while soft-disabled */
+	u8 perf_event_pending;		/* PM interrupt while soft-disabled */
 
 	/* Stuff for accurate time accounting */
 	u64 user_time;			/* accumulated usermode TB ticks */
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index c98321fcb45..197b7d95879 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -41,7 +41,7 @@ DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
 struct power_pmu *ppmu;
 
 /*
- * Normally, to ignore kernel events we set the FCS (freeze events
+ * Normally, to ignore kernel events we set the FCS (freeze counters
  * in supervisor mode) bit in MMCR0, but if the kernel runs with the
  * hypervisor bit set in the MSR, or if we are running on a processor
  * where the hypervisor bit is forced to 1 (as on Apple G5 processors),
@@ -159,7 +159,7 @@ void perf_event_print_debug(void)
 }
 
 /*
- * Read one performance monitor event (PMC).
+ * Read one performance monitor counter (PMC).
  */
 static unsigned long read_pmc(int idx)
 {
@@ -409,7 +409,7 @@ static void power_pmu_read(struct perf_event *event)
 		val = read_pmc(event->hw.idx);
 	} while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
 
-	/* The events are only 32 bits wide */
+	/* The counters are only 32 bits wide */
 	delta = (val - prev) & 0xfffffffful;
 	atomic64_add(delta, &event->count);
 	atomic64_sub(delta, &event->hw.period_left);
@@ -543,7 +543,7 @@ void hw_perf_disable(void)
 		}
 
 		/*
-		 * Set the 'freeze events' bit.
+		 * Set the 'freeze counters' bit.
 		 * The barrier is to make sure the mtspr has been
 		 * executed and the PMU has frozen the events
 		 * before we return.
@@ -1124,7 +1124,7 @@ const struct pmu *hw_perf_event_init(struct perf_event *event)
 }
 
 /*
- * A event has overflowed; update its count and record
+ * A counter has overflowed; update its count and record
  * things if requested.  Note that interrupts are hard-disabled
  * here so there is no possibility of being interrupted.
  */
@@ -1271,7 +1271,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
 
 	/*
 	 * Reset MMCR0 to its normal value.  This will set PMXE and
-	 * clear FC (freeze events) and PMAO (perf mon alert occurred)
+	 * clear FC (freeze counters) and PMAO (perf mon alert occurred)
 	 * and thus allow interrupts to occur again.
 	 * XXX might want to use MSR.PM to keep the events frozen until
 	 * we get back out of this interrupt.
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 0d03629fb1a..a3c7adb06b7 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -2081,13 +2081,13 @@ void __init init_hw_perf_events(void)
 	perf_events_lapic_init();
 	register_die_notifier(&perf_event_nmi_notifier);
 
-	pr_info("... version:                 %d\n",     x86_pmu.version);
-	pr_info("... bit width:               %d\n",     x86_pmu.event_bits);
-	pr_info("... generic events:        %d\n",     x86_pmu.num_events);
-	pr_info("... value mask:              %016Lx\n", x86_pmu.event_mask);
-	pr_info("... max period:              %016Lx\n", x86_pmu.max_period);
-	pr_info("... fixed-purpose events:  %d\n",     x86_pmu.num_events_fixed);
-	pr_info("... event mask:            %016Lx\n", perf_event_mask);
+	pr_info("... version:                %d\n",     x86_pmu.version);
+	pr_info("... bit width:              %d\n",     x86_pmu.event_bits);
+	pr_info("... generic registers:      %d\n",     x86_pmu.num_events);
+	pr_info("... value mask:             %016Lx\n", x86_pmu.event_mask);
+	pr_info("... max period:             %016Lx\n", x86_pmu.max_period);
+	pr_info("... fixed-purpose events:   %d\n",     x86_pmu.num_events_fixed);
+	pr_info("... event mask:             %016Lx\n", perf_event_mask);
 }
 
 static inline void x86_pmu_read(struct perf_event *event)
-- 
cgit v1.2.3


From 7d3392e54653171bd13467bf37f1182e83fadd08 Mon Sep 17 00:00:00 2001
From: Markus Heidelberg <markus.heidelberg@web.de>
Date: Fri, 12 Jun 2009 01:02:35 +0200
Subject: trivial: remove references to non-existent include/linux/config.h

Ignore drivers/staging/ since it is very likely that new drivers
introduce it again.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/h8300/kernel/timer/tpu.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/h8300/kernel/timer/tpu.c b/arch/h8300/kernel/timer/tpu.c
index e7c6e614a75..2193a2e2859 100644
--- a/arch/h8300/kernel/timer/tpu.c
+++ b/arch/h8300/kernel/timer/tpu.c
@@ -7,7 +7,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-- 
cgit v1.2.3


From 411c94038594b2a3fd123d09bdec3fe2500e383d Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Tue, 7 Jul 2009 15:24:23 +0530
Subject: trivial: fix typo "for for" in multiple files

trivial: fix typo "for for" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/blackfin/mach-bf538/include/mach/defBF539.h | 2 +-
 arch/powerpc/kernel/udbg_16550.c                 | 2 +-
 arch/powerpc/platforms/powermac/udbg_scc.c       | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index bdc330cd0e1..1c58914a874 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2325,7 +2325,7 @@
 #define	AMBEN_B0_B1	0x0004	/* Enable Asynchronous Memory Banks 0 &	1 only */
 #define	AMBEN_B0_B1_B2	0x0006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
 #define	AMBEN_ALL	0x0008	/* Enable Asynchronous Memory Banks (all) 0, 1,	2, and 3 */
-#define	CDPRIO		0x0100	/* DMA has priority over core for for external accesses */
+#define	CDPRIO		0x0100	/* DMA has priority over core for external accesses */
 
 /* EBIU_AMGCTL Bit Positions */
 #define	AMCKEN_P		0x0000	/* Enable CLKOUT */
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index acb74a17bbb..b4b167b3364 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -1,5 +1,5 @@
 /*
- * udbg for for NS16550 compatable serial ports
+ * udbg for NS16550 compatable serial ports
  *
  * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
  *
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 572771fd846..9490157da62 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -1,5 +1,5 @@
 /*
- * udbg for for zilog scc ports as found on Apple PowerMacs
+ * udbg for zilog scc ports as found on Apple PowerMacs
  *
  * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
  *
-- 
cgit v1.2.3


From 4f37940d64a155c025968118849b596f6aaa8128 Mon Sep 17 00:00:00 2001
From: "Samuel R. C. Vale" <srcvale@holoscopio.com>
Date: Fri, 10 Jul 2009 12:07:15 -0300
Subject: trivial: fix typos in comments s/DGBU/DBGU/

DBGU means Debug Unit, was refered as "DGBU" in some files. Fixed to "DBGU".

Signed-off-by: Samuel R. C. Vale <srcvale@holoscopio.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
 arch/arm/mach-at91/board-cam60.c       | 2 +-
 arch/arm/mach-at91/board-neocore926.c  | 2 +-
 arch/arm/mach-at91/board-qil-a9260.c   | 2 +-
 arch/arm/mach-at91/board-sam9260ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9261ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9263ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9g20ek.c   | 2 +-
 arch/arm/mach-at91/board-sam9rlek.c    | 2 +-
 arch/arm/mach-at91/board-usb-a9260.c   | 2 +-
 arch/arm/mach-at91/board-usb-a9263.c   | 2 +-
 11 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 61e52b66bc7..50667bed7cc 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -53,7 +53,7 @@ static void __init afeb9260_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index d3ba29c5d8c..02138af631e 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -50,7 +50,7 @@ static void __init cam60_map_io(void)
 	/* Initialize processor: 10 MHz crystal */
 	at91sam9260_initialize(10000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9ba7ba2cc3b..8c0b71c95be 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -56,7 +56,7 @@ static void __init neocore926_map_io(void)
 	/* Initialize processor: 20 MHz crystal */
 	at91sam9263_initialize(20000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 4cff9a7e61d..664938e8f66 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 93a0f8b100e..ba9d501b5c5 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -54,7 +54,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index f9b19993a7a..c4c8865d52d 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -61,7 +61,7 @@ static void __init ek_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 1bf7bd4cbe1..26f1aa6049a 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -57,7 +57,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 16.367 MHz crystal */
 	at91sam9263_initialize(16367660);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index ca470d504ea..29cf8317748 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -50,7 +50,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 9d07679efce..94ffb5c103b 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -43,7 +43,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9rl_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index d13304c0bc4..905d6ef7680 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index d96405b7d57..b6a3480383e 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -52,7 +52,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.00 MHz crystal */
 	at91sam9263_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */
-- 
cgit v1.2.3


From fd589a8f0a13f53a2dd580b1fe170633cf6b095f Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Thu, 16 Jul 2009 17:13:03 +0200
Subject: trivial: fix typo "to to" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/ia64/ia32/sys_ia32.c            | 2 +-
 arch/um/include/shared/ptrace_user.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 16ef61a91d9..625ed8f76fc 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1270,7 +1270,7 @@ putreg (struct task_struct *child, int regno, unsigned int value)
 	      case PT_CS:
 		if (value != __USER_CS)
 			printk(KERN_ERR
-			       "ia32.putreg: attempt to to set invalid segment register %d = %x\n",
+			       "ia32.putreg: attempt to set invalid segment register %d = %x\n",
 			       regno, value);
 		break;
 	      default:
diff --git a/arch/um/include/shared/ptrace_user.h b/arch/um/include/shared/ptrace_user.h
index 4bce6e01288..7fd8539bc19 100644
--- a/arch/um/include/shared/ptrace_user.h
+++ b/arch/um/include/shared/ptrace_user.h
@@ -29,7 +29,7 @@ extern int ptrace_setregs(long pid, unsigned long *regs_in);
  * recompilation. So, we use PTRACE_OLDSETOPTIONS in UML.
  * We also want to be able to build the kernel on 2.4, which doesn't
  * have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare
- * PTRACE_OLDSETOPTIONS to to be the same as PTRACE_SETOPTIONS.
+ * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS.
  *
  * On architectures, that start to support PTRACE_O_TRACESYSGOOD on
  * linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't
-- 
cgit v1.2.3


From 7da8b6ddc7a03346f825925e0d981ca2bd1ed617 Mon Sep 17 00:00:00 2001
From: Michael Tokarev <mjt@tls.msk.ru>
Date: Wed, 22 Jul 2009 17:50:23 +0400
Subject: trivial: fix missing printk space in amd_k7_smp_check

This trivial patch fixes one missing space in printk.

I already fixed it about half a year ago or more, but the change (in
arch/x86/kernel/cpu/smpboot.c at that time) didn't made into
mainline yet.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

index 28e5f59..6c139ed 100644
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/x86/kernel/cpu/amd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index f32fa71ccf9..c910a716a71 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -184,7 +184,7 @@ static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
 	 * approved Athlon
 	 */
 	WARN_ONCE(1, "WARNING: This combination of AMD"
-		"processors is not suitable for SMP.\n");
+		" processors is not suitable for SMP.\n");
 	if (!test_taint(TAINT_UNSAFE_SMP))
 		add_taint(TAINT_UNSAFE_SMP);
 
-- 
cgit v1.2.3


From 3dbda77e6f3375f87090cfce97b2551d3723521b Mon Sep 17 00:00:00 2001
From: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Date: Thu, 23 Jul 2009 08:31:31 +0200
Subject: trivial: fix typos "man[ae]g?ment" -> "management"

Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/arm/Makefile                     | 2 +-
 arch/frv/lib/cache.S                  | 2 +-
 arch/mn10300/include/asm/cacheflush.h | 4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7350557a81e..54661125a8b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -25,7 +25,7 @@ KBUILD_CFLAGS	+=$(call cc-option,-marm,)
 # Select a platform tht is kept up-to-date
 KBUILD_DEFCONFIG := versatile_defconfig
 
-# defines filename extension depending memory manement type.
+# defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
 MMUEXT		:= -nommu
 endif
diff --git a/arch/frv/lib/cache.S b/arch/frv/lib/cache.S
index 0e10ad8dc46..0c4fb204911 100644
--- a/arch/frv/lib/cache.S
+++ b/arch/frv/lib/cache.S
@@ -1,4 +1,4 @@
-/* cache.S: cache managment routines
+/* cache.S: cache management routines
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h
index 2db746a251f..1a55d61f0d0 100644
--- a/arch/mn10300/include/asm/cacheflush.h
+++ b/arch/mn10300/include/asm/cacheflush.h
@@ -17,7 +17,7 @@
 #include <linux/mm.h>
 
 /*
- * virtually-indexed cache managment (our cache is physically indexed)
+ * virtually-indexed cache management (our cache is physically indexed)
  */
 #define flush_cache_all()			do {} while (0)
 #define flush_cache_mm(mm)			do {} while (0)
@@ -31,7 +31,7 @@
 #define flush_dcache_mmap_unlock(mapping)	do {} while (0)
 
 /*
- * physically-indexed cache managment
+ * physically-indexed cache management
  */
 #ifndef CONFIG_MN10300_CACHE_DISABLED
 
-- 
cgit v1.2.3


From a419aef8b858a2bdb98df60336063d28df4b272f Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 18 Aug 2009 11:18:35 -0700
Subject: trivial: remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 arch/s390/hypfs/inode.c    | 2 +-
 arch/s390/kvm/interrupt.c  | 2 +-
 arch/sparc/kernel/irq_64.c | 2 +-
 arch/um/drivers/net_kern.c | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index bd9914b8948..1baa635717b 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -496,7 +496,7 @@ static int __init hypfs_init(void)
 	}
 	s390_kobj = kobject_create_and_add("s390", hypervisor_kobj);
 	if (!s390_kobj) {
-		rc = -ENOMEM;;
+		rc = -ENOMEM;
 		goto fail_sysfs;
 	}
 	rc = register_filesystem(&hypfs_type);
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 2c2f9835341..43486c2408e 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -478,7 +478,7 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 	if (!inti)
 		return -ENOMEM;
 
-	inti->type = KVM_S390_PROGRAM_INT;;
+	inti->type = KVM_S390_PROGRAM_INT;
 	inti->pgm.code = code;
 
 	VCPU_EVENT(vcpu, 3, "inject: program check %d (from kernel)", code);
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index 8daab33fc17..8ab1d4728a4 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -229,7 +229,7 @@ static unsigned int sun4u_compute_tid(unsigned long imap, unsigned long cpuid)
 				tid = ((a << IMAP_AID_SHIFT) |
 				       (n << IMAP_NID_SHIFT));
 				tid &= (IMAP_AID_SAFARI |
-					IMAP_NID_SAFARI);;
+					IMAP_NID_SAFARI);
 			}
 		} else {
 			tid = cpuid << IMAP_TID_SHIFT;
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index f114813ae25..a74245ae3a8 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -533,7 +533,7 @@ static int eth_parse(char *str, int *index_out, char **str_out,
 		     char **error_out)
 {
 	char *end;
-	int n, err = -EINVAL;;
+	int n, err = -EINVAL;
 
 	n = simple_strtoul(str, &end, 0);
 	if (end == str) {
-- 
cgit v1.2.3


From 6ff89e9d62014b0e21fad96cf4d72d68b3aa0d8c Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 11:43:00 +0100
Subject: ARM: 5620/1: at91/dmaengine: integration of at_hdmac driver in
 at91sam9rl

This is the integration of DMA engine driver into at91sam9rl device file. The
associated driver is at_hdmac.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9rl_devices.c | 47 +++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 728186515cd..1c2dced8748 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -21,10 +21,56 @@
 #include <mach/at91sam9rl.h>
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
+/* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 2,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9RL_ID_DMA,
+		.end	= AT91SAM9RL_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
 /* --------------------------------------------------------------------
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
@@ -1103,6 +1149,7 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
-- 
cgit v1.2.3


From 40262b2b6efac507005a2c981175266bf81152a7 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 11:43:01 +0100
Subject: ARM: 5621/1: at91/dmaengine: integration of at_hdmac driver in
 at91sam9g45 series

This is the integration of DMA engine driver into at91sam9g45 series
device file.
The associated driver is at_hdmac.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 49 ++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d746e8621bc..45720c84f0b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -24,10 +24,58 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
+/* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 8,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_DMA,
+		.end	= AT91SAM9G45_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  USB Host (OHCI)
  * -------------------------------------------------------------------- */
@@ -1220,6 +1268,7 @@ void __init at91_add_device_serial(void) {}
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
-- 
cgit v1.2.3


From 378ac65e6c6779c526c9016cafb61d84ff9cbecd Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 18 Sep 2009 16:14:22 +0100
Subject: ARM: 5709/1: at91: add AC97 support to at91sam9g45 series and
 at91sam9m10g45ek board

Add the support of AC97 on the at91sam9g45 chip series and -ek board.
It will share the code with AVR32 ac97c alsa driver "atmel_ac97c".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 55 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9m10g45ek.c  | 10 ++++++
 2 files changed, 65 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 45720c84f0b..d581cff80c4 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -597,6 +597,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_AC97C,
+		.end	= AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_AC97C,
+		.end	= AT91SAM9G45_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD8, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD9, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD7, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD6, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9g45_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index b8558eae522..64c3843f323 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -310,6 +310,14 @@ static void __init ek_add_device_buttons(void) {}
 #endif
 
 
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
 /*
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
@@ -372,6 +380,8 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
-- 
cgit v1.2.3


From 439a33074c7d0895dd1e13ac354b8b4505d3ea43 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 18 Sep 2009 16:14:21 +0100
Subject: ARM: 5710/1: at91: add AC97 support to at91sam9rl and at91sam9rlek
 board

Add the support of AC97 on the at91sam9rl chip and -ek board.
It will share the code with AVR32 ac97c alsa driver "atmel_ac97c".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9rl_devices.c | 55 +++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9rlek.c     | 10 ++++++
 2 files changed, 65 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 1c2dced8748..d345f5453db 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -443,6 +443,61 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_AC97C,
+		.end	= AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_AC97C,
+		.end	= AT91SAM9RL_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD1, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD2, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD3, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD4, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9rl_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 9d07679efce..cde056570a4 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -210,6 +210,14 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 #endif
 
 
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
 /*
  * LEDs
  */
@@ -299,6 +307,8 @@ static void __init ek_board_init(void)
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
 	/* LEDs */
-- 
cgit v1.2.3


From 9c5e8fecc4a86adbf363f5cf344c0ccccdbb8982 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 18 Sep 2009 20:40:27 +0100
Subject: ARM: 5711/1: locomo.c: CodingStyle cleanups

EXPORT* macros should follow immediately after the closing function
brace line.

The prototype for locomo_chip_driver() is not needed since the static
(inline) function is located earlier in the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/locomo.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 2293f0ce061..bd36c778c81 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -865,6 +865,7 @@ void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_set_dir);
 
 int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 {
@@ -882,6 +883,7 @@ int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_level);
 
 int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 {
@@ -899,6 +901,7 @@ int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_output);
 
 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 {
@@ -920,6 +923,7 @@ void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_write);
 
 static void locomo_m62332_sendbit(void *mapbase, int bit)
 {
@@ -1084,13 +1088,12 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_m62332_senddata);
 
 /*
  *	Frontlight control
  */
 
-static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
-
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
 {
 	unsigned long flags;
@@ -1182,11 +1185,13 @@ int locomo_driver_register(struct locomo_driver *driver)
 	driver->drv.bus = &locomo_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_register);
 
 void locomo_driver_unregister(struct locomo_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_unregister);
 
 static int __init locomo_init(void)
 {
@@ -1208,11 +1213,3 @@ module_exit(locomo_exit);
 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
-
-EXPORT_SYMBOL(locomo_driver_register);
-EXPORT_SYMBOL(locomo_driver_unregister);
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-EXPORT_SYMBOL(locomo_gpio_read_level);
-EXPORT_SYMBOL(locomo_gpio_read_output);
-EXPORT_SYMBOL(locomo_gpio_write);
-EXPORT_SYMBOL(locomo_m62332_senddata);
-- 
cgit v1.2.3


From 2003b7af259611312ea132da1f5006ae0b8e47d7 Mon Sep 17 00:00:00 2001
From: Frederic Riss <frederic.riss@gmail.com>
Date: Mon, 21 Sep 2009 08:43:30 +0100
Subject: ARM: 5715/1: Make kprobes unregistration SMP safe

ARM kprobes use an illegal instruction to trigger kprobes. In the
current implementation, there's a race between the unregistration of a
kprobe and the illegal instruction exception handler if they run at the
same time on different cores.

When reading the value of the undefined instruction, the exception
handler might get the original legal instruction as just patched
concurrently by arch_disarm_kprobe(). When this happen the kprobe
handler won't run, and thus the exception handler will oops because it
believe it just hit an undefined instruction in kernel space.

The following patch synchronizes the code patching in the kprobes
unregistration using stop_machine and thus avoids the above race.

Signed-off-by: Frederic RISS <frederic.riss@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/kprobes.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index f692efddd44..60c62c377fa 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
@@ -83,10 +84,24 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	flush_insns(p->addr, 1);
 }
 
+/*
+ * The actual disarming is done here on each CPU and synchronized using
+ * stop_machine. This synchronization is necessary on SMP to avoid removing
+ * a probe between the moment the 'Undefined Instruction' exception is raised
+ * and the moment the exception handler reads the faulting instruction from
+ * memory.
+ */
+int __kprobes __arch_disarm_kprobe(void *p)
+{
+	struct kprobe *kp = p;
+	*kp->addr = kp->opcode;
+	flush_insns(kp->addr, 1);
+	return 0;
+}
+
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	*p->addr = p->opcode;
-	flush_insns(p->addr, 1);
+	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
-- 
cgit v1.2.3


From 4321532cec25e1747961d83fb4f78ec24ea92966 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 21 Sep 2009 12:30:32 +0100
Subject: ARM: 5718/1: Sane busids for RealView board components

This removes the totally bogus bus ID:s with two-digit hex numerals
either referring to the base address of corresponding versatile
machine or just some arbitrarily chosen digit in favor of just using
the device identifier as a string. I kept the "dev:" prefix for
DevChips, "fpga:" prefix for FPGA:s and "issp:" prefix for the
other processor bus, just in case someone likes them.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c            | 18 +++++++--------
 arch/arm/mach-realview/realview_eb.c     | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pb1176.c | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pb11mp.c | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pba8.c   | 38 ++++++++++++++++----------------
 arch/arm/mach-realview/realview_pbx.c    | 38 ++++++++++++++++----------------
 6 files changed, 104 insertions(+), 104 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index dc3519c50ab..5a5e1f72461 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -296,31 +296,31 @@ static struct clk ref24_clk = {
 
 static struct clk_lookup lookups[] = {
 	{	/* UART0 */
-		.dev_id		= "dev:f1",
+		.dev_id		= "dev:uart0",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
+		.dev_id		= "dev:uart1",
 		.clk		= &ref24_clk,
 	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
+		.dev_id		= "dev:uart2",
 		.clk		= &ref24_clk,
 	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
+		.dev_id		= "fpga:uart3",
 		.clk		= &ref24_clk,
 	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
+		.dev_id		= "fpga:kmi0",
 		.clk		= &ref24_clk,
 	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
+		.dev_id		= "fpga:kmi1",
 		.clk		= &ref24_clk,
 	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
+		.dev_id		= "fpga:mmc0",
 		.clk		= &ref24_clk,
 	}, {	/* EB:CLCD */
-		.dev_id		= "dev:20",
+		.dev_id		= "dev:clcd",
 		.clk		= &oscvco_clk,
 	}, {	/* PB:CLCD */
-		.dev_id		= "issp:20",
+		.dev_id		= "issp:clcd",
 		.clk		= &oscvco_clk,
 	}
 };
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index abd13b44867..c0795ea3b3a 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -193,27 +193,27 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define EB_SSP_DMA	{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
+AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
+AMBA_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
+AMBA_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  EB_SMC,   NULL);
-AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
-AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2",  EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3",  EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  EB_SSP,   NULL);
+AMBA_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
+AMBA_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
+AMBA_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
+AMBA_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
+AMBA_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
+AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
+AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 17fbb0e889b..395dc18070b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -170,29 +170,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB1176_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB1176_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB1176_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:30",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
+//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 //	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index fdd042b85f4..c0c9e35e6e3 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -172,29 +172,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PB11MP_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB11MP_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB11MP_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB11MP_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB11MP_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB11MP_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 70bba9900d9..4fc64e146c3 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -162,29 +162,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PBA8_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBA8_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBA8_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBA8_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBA8_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBA8_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ce6c5d25fbe..cf68b542606 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -182,29 +182,29 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PBX_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
-- 
cgit v1.2.3


From ceb69a899f0819bce825083bd487c6afacc0d1b4 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Fri, 11 Sep 2009 00:59:07 +0200
Subject: ixp4xx: timer and clocks cleanups
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch does a few simple cleanups of the ixp4xx timer
and clocksource/clockevent code in mach-ixp4xx/common.c:

- ixp4xx_clocksource_init() is static and always returns 0,
  which is ignored by its only caller: make it return void
- ixp4xx_clockevent_init(): ditto
- ixp4xx_get_cycles() is only referenced locally: make it static
- use the ixp4xx_timer_irq.dev_id field to pass &clockevent_ixp4xx
  to ixp4xx_timer_interrupt() via its dev_id parameter, allowing
  the code in ixp4xx_timer_interrupt() to be smaller and faster

Tested on an ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/common.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 5083f03e9b5..cfd52fb341c 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -41,8 +41,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-static int __init ixp4xx_clocksource_init(void);
-static int __init ixp4xx_clockevent_init(void);
+static void __init ixp4xx_clocksource_init(void);
+static void __init ixp4xx_clockevent_init(void);
 static struct clock_event_device clockevent_ixp4xx;
 
 /*************************************************************************
@@ -267,7 +267,7 @@ void __init ixp4xx_init_irq(void)
 
 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &clockevent_ixp4xx;
+	struct clock_event_device *evt = dev_id;
 
 	/* Clear Pending Interrupt by writing '1' to it */
 	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
@@ -281,6 +281,7 @@ static struct irqaction ixp4xx_timer_irq = {
 	.name		= "timer1",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= ixp4xx_timer_interrupt,
+	.dev_id		= &clockevent_ixp4xx,
 };
 
 void __init ixp4xx_timer_init(void)
@@ -401,7 +402,7 @@ void __init ixp4xx_sys_init(void)
 /*
  * clocksource
  */
-cycle_t ixp4xx_get_cycles(struct clocksource *cs)
+static cycle_t ixp4xx_get_cycles(struct clocksource *cs)
 {
 	return *IXP4XX_OSTS;
 }
@@ -417,14 +418,12 @@ static struct clocksource clocksource_ixp4xx = {
 
 unsigned long ixp4xx_timer_freq = FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
-static int __init ixp4xx_clocksource_init(void)
+static void __init ixp4xx_clocksource_init(void)
 {
 	clocksource_ixp4xx.mult =
 		clocksource_hz2mult(ixp4xx_timer_freq,
 				    clocksource_ixp4xx.shift);
 	clocksource_register(&clocksource_ixp4xx);
-
-	return 0;
 }
 
 /*
@@ -480,7 +479,7 @@ static struct clock_event_device clockevent_ixp4xx = {
 	.set_next_event	= ixp4xx_set_next_event,
 };
 
-static int __init ixp4xx_clockevent_init(void)
+static void __init ixp4xx_clockevent_init(void)
 {
 	clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
 					clockevent_ixp4xx.shift);
@@ -491,5 +490,4 @@ static int __init ixp4xx_clockevent_init(void)
 	clockevent_ixp4xx.cpumask = cpumask_of(0);
 
 	clockevents_register_device(&clockevent_ixp4xx);
-	return 0;
 }
-- 
cgit v1.2.3


From 74c32e7234afc4586391c0c0f290d266a3e57fe5 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Fri, 11 Sep 2009 00:56:54 +0200
Subject: ixp4xx: arch_idle() documentation fixup
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The body of the mach-ixp4xx arch_idle() is mysteriously
disabled by an #if 0 .. #endif. Normally one would expect
to find a call to cpu_do_idle() there, but that call is
disabled, even though cpu_do_idle() is implemented for
XScale cores (and ixp4xx is one).

The explanation can be found in the ixp42x developer's manual
which states that the XScale core clock and power management
registers aren't implemented on ixp42x [3.5.2.2].

Also, the disabled code has suffered from bit rot:
- it checks hlt_counter which is obsolete, as that variable
  and all related code now is private to kernel/process.c
- it passes too many parameters to cpu_do_idle()

So this patch:
- adds a comment before the #if 0 to explain why
  cpu_do_idle() mustn't be called on ixp4xx
- removes the obsolete test of hlt_counter and the
  obsolete parameter to cpu_do_idle()

This is purely a documentation fixup and changes no
generated code. Even so, it has been tested on an
ixp420 machine (ds101).

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
---
 arch/arm/mach-ixp4xx/include/mach/system.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index d2aa26f5acd..54c0af7fa2d 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -13,9 +13,11 @@
 
 static inline void arch_idle(void)
 {
+	/* ixp4xx does not implement the XScale PWRMODE register,
+	 * so it must not call cpu_do_idle() here.
+	 */
 #if 0
-	if (!hlt_counter)
-		cpu_do_idle(0);
+	cpu_do_idle();
 #endif
 }
 
-- 
cgit v1.2.3


From b75fe4e5b869f8dbebd36df64a7fcda0c5b318ed Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 21 Sep 2009 13:34:06 -0700
Subject: xen: check EFER for NX before setting up GDT mapping

x86-64 assumes NX is available by default, so we need to
explicitly check for it before using NX.  Some first-generation
Intel x86-64 processors didn't support NX, and even recent systems
allow it to be disabled in BIOS.

[ Impact: prevent Xen crash on NX-less 64-bit machines ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
---
 arch/x86/mm/Makefile     |  1 +
 arch/x86/xen/enlighten.c | 10 +++++-----
 2 files changed, 6 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9b5a9f59a47..dd313d035de 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -4,6 +4,7 @@ obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_physaddr.o		:= $(nostackp)
+CFLAGS_init.o			:= $(nostackp)
 
 obj-$(CONFIG_SMP)		+= tlb.o
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0dd0c2c6cae..5d701bf66a2 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1083,6 +1083,11 @@ asmlinkage void __init xen_start_kernel(void)
 
 	__supported_pte_mask |= _PAGE_IOMAP;
 
+#ifdef CONFIG_X86_64
+	/* Work out if we support NX */
+	check_efer();
+#endif
+
 	xen_setup_features();
 
 	/* Get mfn list */
@@ -1123,11 +1128,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-#ifdef CONFIG_X86_64
-	/* Work out if we support NX */
-	check_efer();
-#endif
-
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-- 
cgit v1.2.3


From c44c9ec0f38b939b3200436e3aa95c1aa83c41c7 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 21 Sep 2009 13:40:42 -0700
Subject: x86: split NX setup into separate file to limit unstack-protected
 code

Move the NX setup into a separate file so that it can be compiled
without stack-protection while leaving the rest of the mm/init code
protected.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/pgtable_types.h |  1 +
 arch/x86/mm/Makefile                 |  4 +--
 arch/x86/mm/init.c                   | 63 --------------------------------
 arch/x86/mm/setup_nx.c               | 69 ++++++++++++++++++++++++++++++++++++
 4 files changed, 72 insertions(+), 65 deletions(-)
 create mode 100644 arch/x86/mm/setup_nx.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 54cb697f490..e9918d99f83 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -277,6 +277,7 @@ static inline pteval_t pte_flags(pte_t pte)
 typedef struct page *pgtable_t;
 
 extern pteval_t __supported_pte_mask;
+extern void set_nx(void);
 extern int nx_enabled;
 
 #define pgprot_writecombine	pgprot_writecombine
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index dd313d035de..06630d26e56 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,10 +1,10 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o physaddr.o gup.o
+	    pat.o pgtable.o physaddr.o gup.o setup_nx.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_physaddr.o		:= $(nostackp)
-CFLAGS_init.o			:= $(nostackp)
+CFLAGS_setup_nx.o		:= $(nostackp)
 
 obj-$(CONFIG_SMP)		+= tlb.o
 
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 0607119cef9..73ffd5536f6 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -28,69 +28,6 @@ int direct_gbpages
 #endif
 ;
 
-int nx_enabled;
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-static int disable_nx __cpuinitdata;
-
-/*
- * noexec = on|off
- *
- * Control non-executable mappings for processes.
- *
- * on      Enable
- * off     Disable
- */
-static int __init noexec_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
-		disable_nx = 0;
-	} else if (!strncmp(str, "off", 3)) {
-		disable_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-	}
-	return 0;
-}
-early_param("noexec", noexec_setup);
-#endif
-
-#ifdef CONFIG_X86_PAE
-static void __init set_nx(void)
-{
-	unsigned int v[4], l, h;
-
-	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
-		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
-
-		if ((v[3] & (1 << 20)) && !disable_nx) {
-			rdmsr(MSR_EFER, l, h);
-			l |= EFER_NX;
-			wrmsr(MSR_EFER, l, h);
-			nx_enabled = 1;
-			__supported_pte_mask |= _PAGE_NX;
-		}
-	}
-}
-#else
-static inline void set_nx(void)
-{
-}
-#endif
-
-#ifdef CONFIG_X86_64
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || disable_nx)
-		__supported_pte_mask &= ~_PAGE_NX;
-}
-#endif
-
 static void __init find_early_table_space(unsigned long end, int use_pse,
 					  int use_gbpages)
 {
diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c
new file mode 100644
index 00000000000..513d8ed5d2e
--- /dev/null
+++ b/arch/x86/mm/setup_nx.c
@@ -0,0 +1,69 @@
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+
+int nx_enabled;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+static int disable_nx __cpuinitdata;
+
+/*
+ * noexec = on|off
+ *
+ * Control non-executable mappings for processes.
+ *
+ * on      Enable
+ * off     Disable
+ */
+static int __init noexec_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		disable_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		disable_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
+	}
+	return 0;
+}
+early_param("noexec", noexec_setup);
+#endif
+
+#ifdef CONFIG_X86_PAE
+void __init set_nx(void)
+{
+	unsigned int v[4], l, h;
+
+	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
+		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+
+		if ((v[3] & (1 << 20)) && !disable_nx) {
+			rdmsr(MSR_EFER, l, h);
+			l |= EFER_NX;
+			wrmsr(MSR_EFER, l, h);
+			nx_enabled = 1;
+			__supported_pte_mask |= _PAGE_NX;
+		}
+	}
+}
+#else
+void set_nx(void)
+{
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || disable_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+#endif
+
-- 
cgit v1.2.3


From afc26cb39e1e74c87a1b5eb013ead2590b91489c Mon Sep 17 00:00:00 2001
From: Julie Zhu <julie.zhu@xilinx.com>
Date: Mon, 27 Jul 2009 11:45:32 -0600
Subject: microblaze: Add architectural support for USB EHCI host controllers

Add architectural support for USB EHCI host controllers. It has been tested
using the USB EHCI host controller from Xilinx Inc., using both High Speed
devices and Full Speed devices.

Signed-off-by: Julie Zhu <julie.zhu@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Kconfig          | 1 +
 arch/microblaze/include/asm/io.h | 3 +++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 2db722d80d4..bbd8327f189 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 config MICROBLAZE
 	def_bool y
 	select HAVE_LMB
+	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config SWAP
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 7c3ec13b44d..fc9997b73c0 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -210,6 +210,9 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define in_be32(a) __raw_readl((const void __iomem __force *)(a))
 #define in_be16(a) __raw_readw(a)
 
+#define writel_be(v, a)	out_be32((__force unsigned *)a, v)
+#define readl_be(a)	in_be32((__force unsigned *)a)
+
 /*
  * Little endian
  */
-- 
cgit v1.2.3


From ac854ff1fc779101ff1989c3a20c1f238a2b5f3a Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 17 Sep 2009 17:37:33 +0200
Subject: microblaze: Save and restore msr in hw exception

I thought that this part of code could be removed because just
save and restore MSR but any code can't change it. But seems to
that any part of code works with this information.

This patch solved problem with allocation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/hw_exception_handler.S | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 3288c973767..0ad0f7011a1 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -84,9 +84,10 @@
 #define NUM_TO_REG(num)		r ## num
 
 #ifdef CONFIG_MMU
-/* FIXME you can't change first load of MSR because there is
- * hardcoded jump bri 4 */
 	#define RESTORE_STATE			\
+		lwi	r5, r1, 0;		\
+		mts	rmsr, r5;		\
+		nop;				\
 		lwi	r3, r1, PT_R3;		\
 		lwi	r4, r1, PT_R4;		\
 		lwi	r5, r1, PT_R5;		\
@@ -309,6 +310,9 @@ _hw_exception_handler:
 	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
 #endif
 
+	mfs	r5, rmsr;
+	nop
+	swi	r5, r1, 0;
 	mfs	r3, resr
 	nop
 	mfs	r4, rear;
-- 
cgit v1.2.3


From a8f90e906783f1f815120eefe813b23cb396e9bd Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Tue, 22 Sep 2009 09:48:08 +1000
Subject: perf_event, powerpc: Fix compilation after big perf_counter rename

This fixes two places in the powerpc perf_event (perf_counter) code
where 'list_entry' needs to be changed to 'group_entry', but were
missed in commit 65abc865 ("perf_counter: Rename list_entry ->
group_entry, counter_list -> group_list").

This also changes 'event' back to 'counter' in a couple of
contexts:

* Field and function names that deal with the limited-function
  counters: it's really the hardware counters whose function is
  limited, not the events that they count.  Hence:

  MAX_LIMITED_HWEVENTS -> MAX_LIMITED_HWCOUNTERS
  limited_event -> limited_counter
  freeze/thaw_limited_events -> freeze/thaw_limited_counters

* The machine-specific PMU description struct (struct power_pmu): this
  renames 'n_event' back to 'n_counter' since it really describes how
  many hardware counters the machine has.  (Renaming this back avoids
  a compile error in each of the machine-specific PMU back-ends where
  they initialize their power_pmu struct.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19128.4280.813369.589704@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/include/asm/perf_event.h |  4 ++--
 arch/powerpc/kernel/perf_event.c      | 38 +++++++++++++++++------------------
 2 files changed, 21 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
index 2499aaadaeb..3288ce3997e 100644
--- a/arch/powerpc/include/asm/perf_event.h
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -14,7 +14,7 @@
 
 #define MAX_HWEVENTS		8
 #define MAX_EVENT_ALTERNATIVES	8
-#define MAX_LIMITED_HWEVENTS	2
+#define MAX_LIMITED_HWCOUNTERS	2
 
 /*
  * This struct provides the constants and functions needed to
@@ -22,7 +22,7 @@
  */
 struct power_pmu {
 	const char	*name;
-	int		n_event;
+	int		n_counter;
 	int		max_alternatives;
 	unsigned long	add_fields;
 	unsigned long	test_adder;
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 197b7d95879..bbcbae183e9 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -30,8 +30,8 @@ struct cpu_hw_events {
 	u64 events[MAX_HWEVENTS];
 	unsigned int flags[MAX_HWEVENTS];
 	unsigned long mmcr[3];
-	struct perf_event *limited_event[MAX_LIMITED_HWEVENTS];
-	u8  limited_hwidx[MAX_LIMITED_HWEVENTS];
+	struct perf_event *limited_counter[MAX_LIMITED_HWCOUNTERS];
+	u8  limited_hwidx[MAX_LIMITED_HWCOUNTERS];
 	u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
@@ -253,7 +253,7 @@ static int power_check_constraints(struct cpu_hw_events *cpuhw,
 	unsigned long addf = ppmu->add_fields;
 	unsigned long tadd = ppmu->test_adder;
 
-	if (n_ev > ppmu->n_event)
+	if (n_ev > ppmu->n_counter)
 		return -1;
 
 	/* First see if the events will go on as-is */
@@ -426,7 +426,7 @@ static int is_limited_pmc(int pmcnum)
 		&& (pmcnum == 5 || pmcnum == 6);
 }
 
-static void freeze_limited_events(struct cpu_hw_events *cpuhw,
+static void freeze_limited_counters(struct cpu_hw_events *cpuhw,
 				    unsigned long pmc5, unsigned long pmc6)
 {
 	struct perf_event *event;
@@ -434,7 +434,7 @@ static void freeze_limited_events(struct cpu_hw_events *cpuhw,
 	int i;
 
 	for (i = 0; i < cpuhw->n_limited; ++i) {
-		event = cpuhw->limited_event[i];
+		event = cpuhw->limited_counter[i];
 		if (!event->hw.idx)
 			continue;
 		val = (event->hw.idx == 5) ? pmc5 : pmc6;
@@ -445,7 +445,7 @@ static void freeze_limited_events(struct cpu_hw_events *cpuhw,
 	}
 }
 
-static void thaw_limited_events(struct cpu_hw_events *cpuhw,
+static void thaw_limited_counters(struct cpu_hw_events *cpuhw,
 				  unsigned long pmc5, unsigned long pmc6)
 {
 	struct perf_event *event;
@@ -453,7 +453,7 @@ static void thaw_limited_events(struct cpu_hw_events *cpuhw,
 	int i;
 
 	for (i = 0; i < cpuhw->n_limited; ++i) {
-		event = cpuhw->limited_event[i];
+		event = cpuhw->limited_counter[i];
 		event->hw.idx = cpuhw->limited_hwidx[i];
 		val = (event->hw.idx == 5) ? pmc5 : pmc6;
 		atomic64_set(&event->hw.prev_count, val);
@@ -495,9 +495,9 @@ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0)
 		       "i" (SPRN_PMC5), "i" (SPRN_PMC6));
 
 	if (mmcr0 & MMCR0_FC)
-		freeze_limited_events(cpuhw, pmc5, pmc6);
+		freeze_limited_counters(cpuhw, pmc5, pmc6);
 	else
-		thaw_limited_events(cpuhw, pmc5, pmc6);
+		thaw_limited_counters(cpuhw, pmc5, pmc6);
 
 	/*
 	 * Write the full MMCR0 including the event overflow interrupt
@@ -653,7 +653,7 @@ void hw_perf_enable(void)
 			continue;
 		idx = hwc_index[i] + 1;
 		if (is_limited_pmc(idx)) {
-			cpuhw->limited_event[n_lim] = event;
+			cpuhw->limited_counter[n_lim] = event;
 			cpuhw->limited_hwidx[n_lim] = idx;
 			++n_lim;
 			continue;
@@ -702,7 +702,7 @@ static int collect_events(struct perf_event *group, int max_count,
 		flags[n] = group->hw.event_base;
 		events[n++] = group->hw.config;
 	}
-	list_for_each_entry(event, &group->sibling_list, list_entry) {
+	list_for_each_entry(event, &group->sibling_list, group_entry) {
 		if (!is_software_event(event) &&
 		    event->state != PERF_EVENT_STATE_OFF) {
 			if (n >= max_count)
@@ -742,7 +742,7 @@ int hw_perf_group_sched_in(struct perf_event *group_leader,
 		return 0;
 	cpuhw = &__get_cpu_var(cpu_hw_events);
 	n0 = cpuhw->n_events;
-	n = collect_events(group_leader, ppmu->n_event - n0,
+	n = collect_events(group_leader, ppmu->n_counter - n0,
 			   &cpuhw->event[n0], &cpuhw->events[n0],
 			   &cpuhw->flags[n0]);
 	if (n < 0)
@@ -764,7 +764,7 @@ int hw_perf_group_sched_in(struct perf_event *group_leader,
 	cpuctx->active_oncpu += n;
 	n = 1;
 	event_sched_in(group_leader, cpu);
-	list_for_each_entry(sub, &group_leader->sibling_list, list_entry) {
+	list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
 		if (sub->state != PERF_EVENT_STATE_OFF) {
 			event_sched_in(sub, cpu);
 			++n;
@@ -797,7 +797,7 @@ static int power_pmu_enable(struct perf_event *event)
 	 */
 	cpuhw = &__get_cpu_var(cpu_hw_events);
 	n0 = cpuhw->n_events;
-	if (n0 >= ppmu->n_event)
+	if (n0 >= ppmu->n_counter)
 		goto out;
 	cpuhw->event[n0] = event;
 	cpuhw->events[n0] = event->hw.config;
@@ -848,11 +848,11 @@ static void power_pmu_disable(struct perf_event *event)
 		}
 	}
 	for (i = 0; i < cpuhw->n_limited; ++i)
-		if (event == cpuhw->limited_event[i])
+		if (event == cpuhw->limited_counter[i])
 			break;
 	if (i < cpuhw->n_limited) {
 		while (++i < cpuhw->n_limited) {
-			cpuhw->limited_event[i-1] = cpuhw->limited_event[i];
+			cpuhw->limited_counter[i-1] = cpuhw->limited_counter[i];
 			cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i];
 		}
 		--cpuhw->n_limited;
@@ -1078,7 +1078,7 @@ const struct pmu *hw_perf_event_init(struct perf_event *event)
 	 */
 	n = 0;
 	if (event->group_leader != event) {
-		n = collect_events(event->group_leader, ppmu->n_event - 1,
+		n = collect_events(event->group_leader, ppmu->n_counter - 1,
 				   ctrs, events, cflags);
 		if (n < 0)
 			return ERR_PTR(-EINVAL);
@@ -1230,7 +1230,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
 	int nmi;
 
 	if (cpuhw->n_limited)
-		freeze_limited_events(cpuhw, mfspr(SPRN_PMC5),
+		freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5),
 					mfspr(SPRN_PMC6));
 
 	perf_read_regs(regs);
@@ -1260,7 +1260,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
 	 * Any that we processed in the previous loop will not be negative.
 	 */
 	if (!found) {
-		for (i = 0; i < ppmu->n_event; ++i) {
+		for (i = 0; i < ppmu->n_counter; ++i) {
 			if (is_limited_pmc(i + 1))
 				continue;
 			val = read_pmc(i + 1);
-- 
cgit v1.2.3


From e469b0eb36c8abf033435c4918b03eaab159e002 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Thu, 17 Sep 2009 21:21:23 +1000
Subject: microblaze: Use correct kbuild variable KBUILD_CFLAGS

Fixes the bug introduced in 9552158573f847aa429334bb97995bb290bb4b0d

Signed-off-by: John Williams <john.williams@petalogix.com>
---
 arch/microblaze/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 8439598d465..737a4dc72ed 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -37,12 +37,12 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
 # r31 holds current when in kernel mode
-KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS		:=
 LDFLAGS_vmlinux	:=
 
-LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
 head-y := arch/microblaze/kernel/head.o
 libs-y += arch/microblaze/lib/
-- 
cgit v1.2.3


From 866d72295d52353eeb0c36ccd8e5813dca869265 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Thu, 17 Sep 2009 21:21:22 +1000
Subject: microblaze: Ensure CPU usermode is set on new userspace processes

Signed-off-by: John Williams <john.williams@petalogix.com>
---
 arch/microblaze/kernel/process.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 00b12c6d532..4201c743cc9 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -235,6 +235,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 	regs->pc = pc;
 	regs->r1 = usp;
 	regs->pt_mode = 0;
+	regs->msr |= MSR_UMS;
 }
 
 #ifdef CONFIG_MMU
-- 
cgit v1.2.3


From 71b23d547b5a06f49acacaf742ebf1a85673f8d1 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Tue, 15 Sep 2009 12:29:55 +1000
Subject: microblaze: Clear sticky FSR register after generating exception
 signals

FSR is sticky, so after the userspace exception/signal generation, clear
it ready for next time.

Signed-off-by: John Williams <john.williams@petalogix.com>
---
 arch/microblaze/kernel/hw_exception_handler.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 0ad0f7011a1..6b0288ebccd 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -384,6 +384,8 @@ handle_other_ex: /* Handle Other exceptions here */
 	addk	r8, r17, r0; /* Load exception address */
 	bralid	r15, full_exception; /* Branch to the handler */
 	nop;
+	mts	r0, rfsr;	/* Clear sticky fsr */
+	nop
 
 	/*
 	 * Trigger execution of the signal handler by enabling
-- 
cgit v1.2.3


From 7ba3fe55d0187cb16c5b205bb131893031b10e66 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 10 Sep 2009 08:16:46 +0200
Subject: microblaze: Remove ipc.h file which points to non-existing
 asm-generic file

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/include/asm/ipc.h | 1 -
 1 file changed, 1 deletion(-)
 delete mode 100644 arch/microblaze/include/asm/ipc.h

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/ipc.h b/arch/microblaze/include/asm/ipc.h
deleted file mode 100644
index a46e3d9c2a3..00000000000
--- a/arch/microblaze/include/asm/ipc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipc.h>
-- 
cgit v1.2.3


From bfc32ad09bd5b077aac62f09e24d10374001c07b Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 15 Sep 2009 09:49:53 +0200
Subject: microblaze: Don't be noisy when userspace causes hardware exceptions

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/exceptions.c | 31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index 0cb64a31e89..e64a5c7282a 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -72,7 +72,8 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 #endif
 
 #if 0
-	printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+	printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \
+							"ESR=%08x\n",
 			type, user_mode(regs) ? "user" : "kernel", fsr,
 			(unsigned int) regs->pc, (unsigned int) regs->esr);
 #endif
@@ -80,42 +81,50 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 	switch (type & 0x1F) {
 	case MICROBLAZE_ILL_OPCODE_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
+			pr_debug(KERN_WARNING "Illegal opcode exception " \
+							"in user mode.\n");
 			_exception(SIGILL, regs, ILL_ILLOPC, addr);
 			return;
 		}
-		printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+		printk(KERN_WARNING "Illegal opcode exception " \
+							"in kernel mode.\n");
 		die("opcode exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_IBUS_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Instruction bus error exception in user mode.\n");
+			pr_debug(KERN_WARNING "Instruction bus error " \
+						"exception in user mode.\n");
 			_exception(SIGBUS, regs, BUS_ADRERR, addr);
 			return;
 		}
-		printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n");
+		printk(KERN_WARNING "Instruction bus error exception " \
+							"in kernel mode.\n");
 		die("bus exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_DBUS_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Data bus error exception in user mode.\n");
+			pr_debug(KERN_WARNING "Data bus error exception " \
+							"in user mode.\n");
 			_exception(SIGBUS, regs, BUS_ADRERR, addr);
 			return;
 		}
-		printk(KERN_WARNING "Data bus error exception in kernel mode.\n");
+		printk(KERN_WARNING "Data bus error exception " \
+							"in kernel mode.\n");
 		die("bus exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_DIV_ZERO_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Divide by zero exception in user mode\n");
+			pr_debug(KERN_WARNING "Divide by zero exception " \
+							"in user mode\n");
 			_exception(SIGILL, regs, ILL_ILLOPC, addr);
 			return;
 		}
-		printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+		printk(KERN_WARNING "Divide by zero exception " \
+							"in kernel mode.\n");
 		die("Divide by exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_FPU_EXCEPTION:
-		printk(KERN_WARNING "FPU exception\n");
+		pr_debug(KERN_WARNING "FPU exception\n");
 		/* IEEE FP exception */
 		/* I removed fsr variable and use code var for storing fsr */
 		if (fsr & FSR_IO)
@@ -133,7 +142,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 
 #ifdef CONFIG_MMU
 	case MICROBLAZE_PRIVILEGED_EXCEPTION:
-		printk(KERN_WARNING "Privileged exception\n");
+		pr_debug(KERN_WARNING "Privileged exception\n");
 		/* "brk r0,r0" - used as debug breakpoint */
 		if (get_user(code, (unsigned long *)regs->pc) == 0
 			&& code == 0x980c0000) {
-- 
cgit v1.2.3


From 23902d95c9297fc1e214a705e57d46d69195b6b3 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 22 Sep 2009 08:58:47 +0200
Subject: microblaze: Generate correct signal and siginfo for integer
 div-by-zero

Signed-off-by: John Williams <john.williams@petalogix.com>
---
 arch/microblaze/kernel/exceptions.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index e64a5c7282a..d9f70f83097 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -116,7 +116,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		if (user_mode(regs)) {
 			pr_debug(KERN_WARNING "Divide by zero exception " \
 							"in user mode\n");
-			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			_exception(SIGILL, regs, FPE_INTDIV, addr);
 			return;
 		}
 		printk(KERN_WARNING "Divide by zero exception " \
-- 
cgit v1.2.3


From f97b4f7de4a4d92e578845d517660942e851ca4f Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Tue, 22 Sep 2009 09:13:04 +1000
Subject: microblaze: Updated CPU version and FPGA family codes in PVR

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/cpu/cpuinfo.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index c411c6757de..3539babc1c1 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -28,6 +28,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.10.d", 0x0b},
 	{"7.20.a", 0x0c},
 	{"7.20.b", 0x0d},
+	{"7.20.c", 0x0e},
 	/* FIXME There is no keycode defined in MBV for these versions */
 	{"2.10.a", 0x10},
 	{"3.00.a", 0x20},
@@ -49,6 +50,8 @@ const struct family_string_key family_string_lookup[] = {
 	{"spartan3a", 0xa},
 	{"spartan3an", 0xb},
 	{"spartan3adsp", 0xc},
+	{"spartan6", 0xd},
+	{"virtex6", 0xe},
 	/* FIXME There is no key code defined for spartan2 */
 	{"spartan2", 0xf0},
 	{NULL, 0},
-- 
cgit v1.2.3


From 235754834b6818e727d6b8e240c4ec7f79e2f457 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 24 Aug 2009 13:26:04 +0200
Subject: microblaze: Support ptrace syscall tracing.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/entry.S  | 72 ++++++++++++++++++++++++++++++++++-------
 arch/microblaze/kernel/ptrace.c | 62 +++++++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index c7353e79f4a..acc1f05d1e2 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -308,38 +308,69 @@ C_ENTRY(_user_exception):
 	swi	r12, r1, PTO+PT_R0;
 	tovirt(r1,r1)
 
-	la	r15, r0, ret_from_trap-8
 /* where the trap should return need -8 to adjust for rtsd r15, 8*/
 /* Jump to the appropriate function for the system call number in r12
  * (r12 is not preserved), or return an error if r12 is not valid. The LP
  * register should point to the location where
  * the called function should return.  [note that MAKE_SYS_CALL uses label 1] */
-	/* See if the system call number is valid.  */
+
+	# Step into virtual mode.
+	set_vms;
+	addik	r11, r0, 3f
+	rtid	r11, 0
+	nop
+3:
+	add	r11, r0, CURRENT_TASK	 /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO /* get thread info */
+	lwi	r11, r11, TI_FLAGS	 /* get flags in thread info */
+	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
+	beqi	r11, 4f
+
+	addik	r3, r0, -ENOSYS
+	swi	r3, r1, PTO + PT_R3
+	brlid	r15, do_syscall_trace_enter
+	addik	r5, r1, PTO + PT_R0
+
+	# do_syscall_trace_enter returns the new syscall nr.
+	addk	r12, r0, r3
+	lwi	r5, r1, PTO+PT_R5;
+	lwi	r6, r1, PTO+PT_R6;
+	lwi	r7, r1, PTO+PT_R7;
+	lwi	r8, r1, PTO+PT_R8;
+	lwi	r9, r1, PTO+PT_R9;
+	lwi	r10, r1, PTO+PT_R10;
+4:
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid.
+ * The LP register should point to the location where the called function
+ * should return.  [note that MAKE_SYS_CALL uses label 1] */
+	/* See if the system call number is valid */
 	addi	r11, r12, -__NR_syscalls;
-	bgei	r11,1f;
+	bgei	r11,5f;
 	/* Figure out which function to use for this system call.  */
 	/* Note Microblaze barrel shift is optional, so don't rely on it */
 	add	r12, r12, r12;			/* convert num -> ptr */
 	add	r12, r12, r12;
 
 	/* Trac syscalls and stored them to r0_ram */
-	lwi	r3, r12, 0x400 + TOPHYS(r0_ram)
+	lwi	r3, r12, 0x400 + r0_ram
 	addi	r3, r3, 1
-	swi	r3, r12, 0x400 + TOPHYS(r0_ram)
+	swi	r3, r12, 0x400 + r0_ram
+
+	# Find and jump into the syscall handler.
+	lwi	r12, r12, sys_call_table
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_trap-8
+	bra	r12
 
-	lwi	r12, r12, TOPHYS(sys_call_table); /* Function ptr */
-	/* Make the system call.  to r12*/
-	set_vms;
-	rtid	r12, 0;
-	nop;
 	/* The syscall number is invalid, return an error.  */
-1:	VM_ON;	/* RETURN() expects virtual mode*/
+5:
 	addi	r3, r0, -ENOSYS;
 	rtsd	r15,8;		/* looks like a normal subroutine return */
 	or 	r0, r0, r0
 
 
-/* Entry point used to return from a syscall/trap.  */
+/* Entry point used to return from a syscall/trap */
 /* We re-enable BIP bit before state restore */
 C_ENTRY(ret_from_trap):
 	set_bip;			/*  Ints masked for state restore*/
@@ -347,6 +378,23 @@ C_ENTRY(ret_from_trap):
 /* See if returning to kernel mode, if so, skip resched &c.  */
 	bnei	r11, 2f;
 
+	/* We're returning to user mode, so check for various conditions that
+	 * trigger rescheduling. */
+	# FIXME: Restructure all these flag checks.
+	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
+	beqi	r11, 1f
+
+	swi	r3, r1, PTO + PT_R3
+	swi	r4, r1, PTO + PT_R4
+	brlid	r15, do_syscall_trace_leave
+	addik	r5, r1, PTO + PT_R0
+	lwi	r3, r1, PTO + PT_R3
+	lwi	r4, r1, PTO + PT_R4
+1:
+
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
 	/* Get current task ptr into r11 */
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index 53ff39af6a5..4b3ac32754d 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -29,6 +29,10 @@
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/signal.h>
+#include <linux/elf.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 
 #include <linux/errno.h>
 #include <asm/processor.h>
@@ -174,6 +178,64 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return rval;
 }
 
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
+
+	secure_computing(regs->r12);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(EM_XILINX_MICROBLAZE, regs->r12,
+				    regs->r5, regs->r6,
+				    regs->r7, regs->r8);
+
+	return ret ?: regs->r12;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->r3), regs->r3);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
+}
+
+#if 0
+static asmlinkage void syscall_trace(void)
+{
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+	/* The 0x80 provides a way for the tracing parent to distinguish
+	 between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				? 0x80 : 0));
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use. strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP. -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+#endif
+
 void ptrace_disable(struct task_struct *child)
 {
 	/* nothing to do */
-- 
cgit v1.2.3


From d6f61770f910a976050458807ff8891e78303297 Mon Sep 17 00:00:00 2001
From: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Date: Thu, 17 Sep 2009 11:47:06 -0400
Subject: microblaze: Actually show KiB rather than pages in "Freeing initrd
 memory:"

Fix "Freeing initrd memory:" message on microblaze to show kilobytes as
claimed rather than number of pages.

Signed-off-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/mm/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index f207f1a94db..42cbc15e015 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -180,7 +180,8 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 		totalram_pages++;
 		pages++;
 	}
-	printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+	printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n",
+					(int)(pages * (PAGE_SIZE / 1024)));
 }
 #endif
 
-- 
cgit v1.2.3


From 19086765140e979d955b536f87e755af43f3fdf5 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Mon, 22 Jun 2009 01:38:12 +0200
Subject: microblaze: Copy ppc asm-compat.h for clean handling of constants in
 asm and C

Provides the ASM_CONST macro for creating asm-safe constants.

No users yet, we'll be using it in upcoming page.h commit, for generating
the LOAD_OFFSET macro

Signed-off-by: John Williams <john.williams@petalogix.com>
---
 arch/microblaze/include/asm/asm-compat.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 arch/microblaze/include/asm/asm-compat.h

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/asm-compat.h b/arch/microblaze/include/asm/asm-compat.h
new file mode 100644
index 00000000000..e7bc9dc11b5
--- /dev/null
+++ b/arch/microblaze/include/asm/asm-compat.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H
+#define _ASM_MICROBLAZE_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+#  define stringify_in_c(...)	__VA_ARGS__
+#  define ASM_CONST(x)		x
+#else
+/* This version of stringify will deal with commas... */
+#  define __stringify_in_c(...)	#__VA_ARGS__
+#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+#  define __ASM_CONST(x)	x##UL
+#  define ASM_CONST(x)		__ASM_CONST(x)
+#endif
+
+#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */
-- 
cgit v1.2.3


From a1253977dff4a033d61a7a96608f5a0bbb36dbf6 Mon Sep 17 00:00:00 2001
From: John Williams <john.williams@petalogix.com>
Date: Mon, 22 Jun 2009 01:38:13 +0200
Subject: microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA
 offsets

LOAD_OFFSET is the offset between the physical load address and the kernel's
virtual address.  It will be used in the upcoming commit to vmlinux.ld.S to
make sure that the LMAs of sections in vmlinux are correct.

Signed-off-by: John Williams <john.williams@petalogix.com>
---
 arch/microblaze/include/asm/page.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 72aceae8868..880c988c223 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -17,6 +17,7 @@
 
 #include <linux/pfn.h>
 #include <asm/setup.h>
+#include <asm/asm-compat.h>
 #include <linux/const.h>
 
 #ifdef __KERNEL__
@@ -26,6 +27,8 @@
 #define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
+#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
+
 #ifndef __ASSEMBLY__
 
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
-- 
cgit v1.2.3


From a061dd5258b2bad6c44c48d2a2d55f4fd5eb85d8 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 22 Sep 2009 09:58:56 +0200
Subject: microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections

Currently, vmlinux has LMA==VMA for all sections, which is wrong for MMU
kernels.  Previous patches in this series defined the LOAD_OFFSET constant,
now we make use of it in our link script.

Other minor changes in this patch:
	* brace/indenting cleanup of some sections
	* put __fdt_* symbols in their own section, and apply LOAD_OFFSET fixup

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/vmlinux.lds.S | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index b76c17c9ae4..dbb98f830f3 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -12,15 +12,15 @@ OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze")
 OUTPUT_ARCH(microblaze)
 ENTRY(_start)
 
-#include <asm-generic/vmlinux.lds.h>
 #include <asm/page.h>
+#include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 
 jiffies = jiffies_64 + 4;
 
 SECTIONS {
 	. = CONFIG_KERNEL_START;
-	.text : {
+	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		_text = . ;
 		_stext = . ;
 		*(.text .text.*)
@@ -35,9 +35,12 @@ SECTIONS {
 	}
 
 	. = ALIGN (4) ;
-	_fdt_start = . ; /* place for fdt blob */
-	. = . + 0x4000;
-	_fdt_end = . ;
+	__fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) {
+		_fdt_start = . ;		/* place for fdt blob */
+		*(__fdt_blob) ;			/* Any link-placed DTB */
+	        . = _fdt_start + 0x4000;	/* Pad up to 16kbyte */
+		_fdt_end = . ;
+	}
 
 	. = ALIGN(16);
 	RODATA
@@ -47,7 +50,7 @@ SECTIONS {
 	 * sdata2 section can go anywhere, but must be word aligned
 	 * and SDA2_BASE must point to the middle of it
 	 */
-	.sdata2 : {
+	.sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) {
 		_ssrw = .;
 		. = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */
 		*(.sdata2)
@@ -68,12 +71,12 @@ SECTIONS {
 
 	/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
 	. = ALIGN(8);
-	.sdata : {
+	.sdata : AT(ADDR(.sdata) - LOAD_OFFSET) {
 		_ssro = .;
 		*(.sdata)
 	}
 
-	.sbss :	{
+	.sbss :	AT(ADDR(.sbss) - LOAD_OFFSET) {
 		_ssbss = .;
 		*(.sbss)
 		_esbss = .;
@@ -86,26 +89,26 @@ SECTIONS {
 
 	INIT_TEXT_SECTION(PAGE_SIZE)
 
-	.init.data : {
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
 		INIT_DATA
 	}
 
 	. = ALIGN(4);
-	.init.ivt : {
+	.init.ivt : AT(ADDR(.init.ivt) - LOAD_OFFSET) {
 		__ivt_start = .;
 		*(.init.ivt)
 		__ivt_end = .;
 	}
 
-	.init.setup : {
+	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
 		INIT_SETUP(0)
 	}
 
-	.initcall.init : {
+	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET ) {
 		INIT_CALLS
 	}
 
-	.con_initcall.init : {
+	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
 		CON_INITCALL
 	}
 
@@ -113,7 +116,7 @@ SECTIONS {
 
 	__init_end_before_initramfs = .;
 
-	.init.ramfs ALIGN(4096) : {
+	.init.ramfs ALIGN(4096) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
 		__initramfs_start = .;
 		*(.init.ramfs)
 		__initramfs_end = .;
@@ -129,7 +132,8 @@ SECTIONS {
 	}
 	__init_end = .;
 
-	.bss ALIGN (4096) : { /* page aligned when MMU used */
+	.bss ALIGN (4096) : AT(ADDR(.bss) - LOAD_OFFSET) {
+		/* page aligned when MMU used */
 		__bss_start = . ;
 			*(.bss*)
 			*(COMMON)
-- 
cgit v1.2.3


From cfa9a775b9ddcef7f53c35e489a71cfed8c02710 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 22 Jun 2009 12:55:32 +0200
Subject: microblaze: Fix _start symbol to physical address

_start is setup to physical kernel start address.
This caused that when you load vmlinux (with MMU kernel)
via XMD program counter (pc) is setup correctly
and then you can write con and start kernel.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/kernel/vmlinux.lds.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index dbb98f830f3..e704188d785 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -20,6 +20,7 @@ jiffies = jiffies_64 + 4;
 
 SECTIONS {
 	. = CONFIG_KERNEL_START;
+	_start = CONFIG_KERNEL_BASE_ADDR;
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		_text = . ;
 		_stext = . ;
-- 
cgit v1.2.3


From b87221de6a4934eda856475a0065688d12973a04 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Mon, 21 Sep 2009 17:01:09 -0700
Subject: const: mark remaining super_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/platforms/cell/spufs/inode.c | 2 +-
 arch/s390/hypfs/inode.c                   | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 24b30b6909c..78f2a52f728 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -773,7 +773,7 @@ static int
 spufs_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct spufs_sb_info *info;
-	static struct super_operations s_ops = {
+	static const struct super_operations s_ops = {
 		.alloc_inode = spufs_alloc_inode,
 		.destroy_inode = spufs_destroy_inode,
 		.statfs = simple_statfs,
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index bd9914b8948..dc2d6668385 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -41,7 +41,7 @@ struct hypfs_sb_info {
 
 static const struct file_operations hypfs_file_ops;
 static struct file_system_type hypfs_type;
-static struct super_operations hypfs_s_ops;
+static const struct super_operations hypfs_s_ops;
 
 /* start of list of all dentries, which have to be deleted on update */
 static struct dentry *hypfs_last_dentry;
@@ -472,7 +472,7 @@ static struct file_system_type hypfs_type = {
 	.kill_sb	= hypfs_kill_super
 };
 
-static struct super_operations hypfs_s_ops = {
+static const struct super_operations hypfs_s_ops = {
 	.statfs		= simple_statfs,
 	.drop_inode	= hypfs_drop_inode,
 	.show_options	= hypfs_show_options,
-- 
cgit v1.2.3


From 6e1d5dcc2bbbe71dbf010c747e15739bef6b7218 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Mon, 21 Sep 2009 17:01:11 -0700
Subject: const: mark remaining inode_operations as const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/platforms/cell/spufs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 78f2a52f728..fc1b1c42b1d 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -119,7 +119,7 @@ spufs_new_file(struct super_block *sb, struct dentry *dentry,
 		const struct file_operations *fops, int mode,
 		size_t size, struct spu_context *ctx)
 {
-	static struct inode_operations spufs_file_iops = {
+	static const struct inode_operations spufs_file_iops = {
 		.setattr = spufs_setattr,
 	};
 	struct inode *inode;
-- 
cgit v1.2.3


From 83d5cde47dedf01b6a4a4331882cbc0a7eea3c2e Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Mon, 21 Sep 2009 17:01:13 -0700
Subject: const: make block_device_operations const

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/sysdev/axonram.c | 2 +-
 arch/um/drivers/ubd_kern.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index a4779912a5c..88f4ae78783 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -165,7 +165,7 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
 	return 0;
 }
 
-static struct block_device_operations axon_ram_devops = {
+static const struct block_device_operations axon_ram_devops = {
 	.owner		= THIS_MODULE,
 	.direct_access	= axon_ram_direct_access
 };
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 8f05d4d9da1..635d16d90a8 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -106,7 +106,7 @@ static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
 #define MAX_DEV (16)
 
-static struct block_device_operations ubd_blops = {
+static const struct block_device_operations ubd_blops = {
         .owner		= THIS_MODULE,
         .open		= ubd_open,
         .release	= ubd_release,
-- 
cgit v1.2.3


From d19f352484467a5e518639ddff0554669c10ffab Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Date: Mon, 21 Sep 2009 17:01:53 -0700
Subject: ksm: define MADV_MERGEABLE and MADV_UNMERGEABLE

The out-of-tree KSM used ioctls on fds cloned from /dev/ksm to register a
memory area for merging: we prefer now to use an madvise(2) interface.

This patch just defines MADV_MERGEABLE (to tell KSM it may merge pages in
this area found identical to pages in other mergeable areas) and
MADV_UNMERGEABLE (to undo that).

Most architectures use asm-generic, but alpha, mips, parisc, xtensa need
their own definitions: included here for mmotm convenience, but we'll
probably want to split this and feed pieces to arch maintainers.

Based upon earlier patches by Chris Wright and Izik Eidus.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: Chris Zankel <chris@zankel.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/mman.h  | 3 +++
 arch/mips/include/asm/mman.h   | 3 +++
 arch/parisc/include/asm/mman.h | 3 +++
 arch/xtensa/include/asm/mman.h | 3 +++
 4 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/mman.h b/arch/alpha/include/asm/mman.h
index 90d7c35d286..c77c55756a7 100644
--- a/arch/alpha/include/asm/mman.h
+++ b/arch/alpha/include/asm/mman.h
@@ -48,6 +48,9 @@
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
 
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
 /* compatibility flags */
 #define MAP_FILE	0
 
diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h
index e4d6f1fb1cf..f15554d1518 100644
--- a/arch/mips/include/asm/mman.h
+++ b/arch/mips/include/asm/mman.h
@@ -71,6 +71,9 @@
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
 
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
 /* compatibility flags */
 #define MAP_FILE	0
 
diff --git a/arch/parisc/include/asm/mman.h b/arch/parisc/include/asm/mman.h
index defe752cc99..a12d9d43f50 100644
--- a/arch/parisc/include/asm/mman.h
+++ b/arch/parisc/include/asm/mman.h
@@ -54,6 +54,9 @@
 #define MADV_16M_PAGES  24              /* Use 16 Megabyte pages */
 #define MADV_64M_PAGES  26              /* Use 64 Megabyte pages */
 
+#define MADV_MERGEABLE   65		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 66		/* KSM may not merge identical pages */
+
 /* compatibility flags */
 #define MAP_FILE	0
 #define MAP_VARIABLE	0
diff --git a/arch/xtensa/include/asm/mman.h b/arch/xtensa/include/asm/mman.h
index 9b92620c8a1..6e55b4d1f9c 100644
--- a/arch/xtensa/include/asm/mman.h
+++ b/arch/xtensa/include/asm/mman.h
@@ -78,6 +78,9 @@
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
 
+#define MADV_MERGEABLE   12		/* KSM may merge identical pages */
+#define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+
 /* compatibility flags */
 #define MAP_FILE	0
 
-- 
cgit v1.2.3


From cc013a88906bad9d2832d6316de1c7dbc1c2a794 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Mon, 21 Sep 2009 17:02:36 -0700
Subject: arches: drop superfluous casts in nr_free_pages() callers

Commit 96177299416dbccb73b54e6b344260154a445375 ("Drop free_pages()")
modified nr_free_pages() to return 'unsigned long' instead of 'unsigned
int'.  This made the casts to 'unsigned long' in most callers superfluous,
so remove them.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <zankel@tensilica.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/mm/init.c      | 2 +-
 arch/alpha/mm/numa.c      | 2 +-
 arch/arm/mm/init.c        | 4 ++--
 arch/avr32/mm/init.c      | 2 +-
 arch/cris/mm/init.c       | 2 +-
 arch/ia64/mm/init.c       | 2 +-
 arch/m32r/mm/init.c       | 2 +-
 arch/m68k/mm/init.c       | 2 +-
 arch/microblaze/mm/init.c | 2 +-
 arch/mips/mm/init.c       | 2 +-
 arch/mn10300/mm/init.c    | 2 +-
 arch/parisc/mm/init.c     | 2 +-
 arch/powerpc/mm/mem.c     | 2 +-
 arch/s390/mm/init.c       | 2 +-
 arch/sh/mm/init.c         | 2 +-
 arch/sparc/mm/init_32.c   | 2 +-
 arch/um/kernel/mem.c      | 2 +-
 arch/x86/mm/init_32.c     | 2 +-
 arch/x86/mm/init_64.c     | 2 +-
 arch/xtensa/mm/init.c     | 2 +-
 20 files changed, 21 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index af71d38c8e4..a0902c20d67 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -299,7 +299,7 @@ printk_memory_info(void)
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
 	printk("Memory: %luk/%luk available (%luk kernel code, %luk reserved, %luk data, %luk init)\n",
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       max_mapnr << (PAGE_SHIFT-10),
 	       codesize >> 10,
 	       reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 0eab5574942..10b403554b6 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -349,7 +349,7 @@ void __init mem_init(void)
 
 	printk("Memory: %luk/%luk available (%luk kernel code, %luk reserved, "
 	       "%luk data, %luk init)\n",
-	       (unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10),
 	       codesize >> 10,
 	       reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index ea36186f32c..f982606d7bf 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -596,8 +596,8 @@ void __init mem_init(void)
 
 	printk(KERN_NOTICE "Memory: %luKB available (%dK code, "
 		"%dK data, %dK init, %luK highmem)\n",
-		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
-		codesize >> 10, datasize >> 10, initsize >> 10,
+		nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10,
+		datasize >> 10, initsize >> 10,
 		(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
 
 	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index e819fa69a90..376f18c4a6c 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -141,7 +141,7 @@ void __init mem_init(void)
 
 	printk ("Memory: %luk/%luk available (%dk kernel code, "
 		"%dk reserved, %dk data, %dk init)\n",
-		(unsigned long)nr_free_pages() << (PAGE_SHIFT - 10),
+		nr_free_pages() << (PAGE_SHIFT - 10),
 		totalram_pages << (PAGE_SHIFT - 10),
 		codesize >> 10,
 		reservedpages << (PAGE_SHIFT - 10),
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 514f46a4b23..ff68b9f516a 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -54,7 +54,7 @@ mem_init(void)
         printk(KERN_INFO
                "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, "
 	       "%dk init)\n" ,
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       max_mapnr << (PAGE_SHIFT-10),
 	       codesize >> 10,
 	       reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index b115b3bbf04..1d286244a56 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -655,7 +655,7 @@ mem_init (void)
 	initsize =  (unsigned long) __init_end - (unsigned long) __init_begin;
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%luk code, %luk reserved, "
-	       "%luk data, %luk init)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT - 10),
+	       "%luk data, %luk init)\n", nr_free_pages() << (PAGE_SHIFT - 10),
 	       num_physpages << (PAGE_SHIFT - 10), codesize >> 10,
 	       reserved_pages << (PAGE_SHIFT - 10), datasize >> 10, initsize >> 10);
 
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index 24d429f9358..9f581df3952 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -171,7 +171,7 @@ void __init mem_init(void)
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 		"%dk reserved, %dk data, %dk init)\n",
-		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+		nr_free_pages() << (PAGE_SHIFT-10),
 		num_physpages << (PAGE_SHIFT-10),
 		codesize >> 10,
 		reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index 0007b2adf3a..774549accd2 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -126,7 +126,7 @@ void __init mem_init(void)
 #endif
 
 	printk("Memory: %luk/%luk available (%dk kernel code, %dk data, %dk init)\n",
-	       (unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       totalram_pages << (PAGE_SHIFT-10),
 	       codepages << (PAGE_SHIFT-10),
 	       datapages << (PAGE_SHIFT-10),
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index f207f1a94db..1110784eb3f 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -204,7 +204,7 @@ void __init mem_init(void)
 	totalram_pages += free_all_bootmem();
 
 	printk(KERN_INFO "Memory: %luk/%luk available\n",
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT-10));
 #ifdef CONFIG_MMU
 	mem_init_done = 1;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 38c79c55b06..1f4ee4797a6 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -417,7 +417,7 @@ void __init mem_init(void)
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
 	       "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       ram << (PAGE_SHIFT-10),
 	       codesize >> 10,
 	       reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index 8cee387a24f..ec1420562dc 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -112,7 +112,7 @@ void __init mem_init(void)
 	       "Memory: %luk/%luk available"
 	       " (%dk kernel code, %dk reserved, %dk data, %dk init,"
 	       " %ldk highmem)\n",
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT - 10),
+	       nr_free_pages() << (PAGE_SHIFT - 10),
 	       max_mapnr << (PAGE_SHIFT - 10),
 	       codesize >> 10,
 	       reservedpages << (PAGE_SHIFT - 10),
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index b0831d9e35c..d5aca31fddb 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -506,7 +506,7 @@ void __init mem_init(void)
 #endif
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
-		(unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+		nr_free_pages() << (PAGE_SHIFT-10),
 		num_physpages << (PAGE_SHIFT-10),
 		codesize >> 10,
 		reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 579382c163a..0e5c59b995e 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -372,7 +372,7 @@ void __init mem_init(void)
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
 	       "%luk reserved, %luk data, %luk bss, %luk init)\n",
-		(unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+		nr_free_pages() << (PAGE_SHIFT-10),
 		num_physpages << (PAGE_SHIFT-10),
 		codesize >> 10,
 		reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index c634dfbe92e..76564795222 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -105,7 +105,7 @@ void __init mem_init(void)
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
         printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, %ldk data, %ldk init)\n",
-                (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+		nr_free_pages() << (PAGE_SHIFT-10),
                 max_mapnr << (PAGE_SHIFT-10),
                 codesize >> 10,
                 reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index edc842ff61e..fabb7c6f48d 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -232,7 +232,7 @@ void __init mem_init(void)
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 	       "%dk data, %dk init)\n",
-		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+		nr_free_pages() << (PAGE_SHIFT-10),
 		num_physpages << (PAGE_SHIFT-10),
 		codesize >> 10,
 		datasize >> 10,
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 54114ad0bde..dc7c3b17a15 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -472,7 +472,7 @@ void __init mem_init(void)
 			reservedpages++;
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init, %ldk highmem)\n",
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       num_physpages << (PAGE_SHIFT - 10),
 	       codepages << (PAGE_SHIFT-10),
 	       reservedpages << (PAGE_SHIFT - 10),
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 61d7e6138ff..a5d5e70cf6f 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -77,7 +77,7 @@ void __init mem_init(void)
 	num_physpages = totalram_pages;
 	max_pfn = totalram_pages;
 	printk(KERN_INFO "Memory: %luk available\n",
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10));
+	       nr_free_pages() << (PAGE_SHIFT-10));
 	kmalloc_ok = 1;
 
 #ifdef CONFIG_HIGHMEM
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 3cd7711bb94..95e877f5b84 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -892,7 +892,7 @@ void __init mem_init(void)
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 			"%dk reserved, %dk data, %dk init, %ldk highmem)\n",
-		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+		nr_free_pages() << (PAGE_SHIFT-10),
 		num_physpages << (PAGE_SHIFT-10),
 		codesize >> 10,
 		reservedpages << (PAGE_SHIFT-10),
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index ea56b8cbb6a..810bd31e7f5 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -687,7 +687,7 @@ void __init mem_init(void)
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
 			 "%ldk absent, %ldk reserved, %ldk data, %ldk init)\n",
-		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+		nr_free_pages() << (PAGE_SHIFT-10),
 		max_pfn << (PAGE_SHIFT-10),
 		codesize >> 10,
 		absent_pages << (PAGE_SHIFT-10),
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 427e14fa43c..cdbc27ca966 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -203,7 +203,7 @@ void __init mem_init(void)
 
 	printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
 	       "%ldk data, %ldk init %ldk highmem)\n",
-	       (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+	       nr_free_pages() << (PAGE_SHIFT-10),
 	       ram << (PAGE_SHIFT-10),
 	       codesize >> 10,
 	       reservedpages << (PAGE_SHIFT-10),
-- 
cgit v1.2.3


From 4481374ce88ba8f460c8b89f2572027bd27057d0 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Mon, 21 Sep 2009 17:03:05 -0700
Subject: mm: replace various uses of num_physpages by totalram_pages

Sizing of memory allocations shouldn't depend on the number of physical
pages found in a system, as that generally includes (perhaps a huge amount
of) non-RAM pages.  The amount of what actually is usable as storage
should instead be used as a basis here.

Some of the calculations (i.e.  those not intending to use high memory)
should likely even use (totalram_pages - totalhigh_pages).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/microcode_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 0db7969b0dd..378e9a8f1bf 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -210,8 +210,8 @@ static ssize_t microcode_write(struct file *file, const char __user *buf,
 {
 	ssize_t ret = -EINVAL;
 
-	if ((len >> PAGE_SHIFT) > num_physpages) {
-		pr_err("microcode: too much data (max %ld pages)\n", num_physpages);
+	if ((len >> PAGE_SHIFT) > totalram_pages) {
+		pr_err("microcode: too much data (max %ld pages)\n", totalram_pages);
 		return ret;
 	}
 
-- 
cgit v1.2.3


From 3c1596efe167322dae87f8390d36f91ce2d7f936 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Mon, 21 Sep 2009 17:03:06 -0700
Subject: mm: don't use alloc_bootmem_low() where not strictly needed

Since alloc_bootmem() will never return inaccessible (via virtual
addressing) memory anyway, using the ..._low() variant only makes sense
when the physical address range of the allocated memory must fulfill
further constraints, espacially since on 64-bits (or more generally in all
cases where the pools the two variants allocate from are than the full
available range.

Probably the use in alloc_tce_table() could also be eliminated (based on
code inspection of pci-calgary_64.c), but that seems too risky given I
know nothing about that hardware and have no way to test it.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/e820.c | 2 +-
 arch/x86/mm/init_32.c  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index a3210ce1ecc..85419bb7d4a 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1331,7 +1331,7 @@ void __init e820_reserve_resources(void)
 	struct resource *res;
 	u64 end;
 
-	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
+	res = alloc_bootmem(sizeof(struct resource) * e820.nr_map);
 	e820_res = res;
 	for (i = 0; i < e820.nr_map; i++) {
 		end = e820.map[i].addr + e820.map[i].size - 1;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 95e877f5b84..b49b4f67453 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -84,7 +84,7 @@ static pmd_t * __init one_md_table_init(pgd_t *pgd)
 #ifdef CONFIG_X86_PAE
 	if (!(pgd_val(*pgd) & _PAGE_PRESENT)) {
 		if (after_bootmem)
-			pmd_table = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+			pmd_table = (pmd_t *)alloc_bootmem_pages(PAGE_SIZE);
 		else
 			pmd_table = (pmd_t *)alloc_low_page();
 		paravirt_alloc_pmd(&init_mm, __pa(pmd_table) >> PAGE_SHIFT);
@@ -116,7 +116,7 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)
 #endif
 			if (!page_table)
 				page_table =
-				(pte_t *)alloc_bootmem_low_pages(PAGE_SIZE);
+				(pte_t *)alloc_bootmem_pages(PAGE_SIZE);
 		} else
 			page_table = (pte_t *)alloc_low_page();
 
-- 
cgit v1.2.3


From 62eede62dafb4a6633eae7ffbeb34c60dba5e7b1 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Date: Mon, 21 Sep 2009 17:03:34 -0700
Subject: mm: ZERO_PAGE without PTE_SPECIAL

Reinstate anonymous use of ZERO_PAGE to all architectures, not just to
those which __HAVE_ARCH_PTE_SPECIAL: as suggested by Nick Piggin.

Contrary to how I'd imagined it, there's nothing ugly about this, just a
zero_pfn test built into one or another block of vm_normal_page().

But the MIPS ZERO_PAGE-of-many-colours case demands is_zero_pfn() and
my_zero_pfn() inlines.  Reinstate its mremap move_pte() shuffling of
ZERO_PAGEs we did from 2.6.17 to 2.6.19?  Not unless someone shouts for
that: it would have to take vm_flags to weed out some cases.

Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mips/include/asm/pgtable.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 1a9f9b25755..d6eb6134abe 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -76,6 +76,16 @@ extern unsigned long zero_page_mask;
 #define ZERO_PAGE(vaddr) \
 	(virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask))))
 
+#define is_zero_pfn is_zero_pfn
+static inline int is_zero_pfn(unsigned long pfn)
+{
+	extern unsigned long zero_pfn;
+	unsigned long offset_from_zero_pfn = pfn - zero_pfn;
+	return offset_from_zero_pfn <= (zero_page_mask >> PAGE_SHIFT);
+}
+
+#define my_zero_pfn(addr)	page_to_pfn(ZERO_PAGE(addr))
+
 extern void paging_init(void);
 
 /*
-- 
cgit v1.2.3


From 90f72aa58bbf076b68e289fbd71eb829bc505923 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 21 Sep 2009 17:03:45 -0700
Subject: mm: add MAP_HUGETLB for mmaping pseudo-anonymous huge page regions

Add a flag for mmap that will be used to request a huge page region that
will look like anonymous memory to user space.  This is accomplished by
using a file on the internal vfsmount.  MAP_HUGETLB is a modifier of
MAP_ANONYMOUS and so must be specified with it.  The region will behave
the same as a MAP_ANONYMOUS region using small pages.

The patch also adds the MAP_STACK flag, which was previously defined only
on some architectures but not on others.  Since MAP_STACK is meant to be a
hint only, architectures can define it without assigning a specific
meaning to it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: David Rientjes <rientjes@google.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/mman.h   | 2 ++
 arch/arm/include/asm/mman.h     | 2 ++
 arch/avr32/include/asm/mman.h   | 2 ++
 arch/cris/include/asm/mman.h    | 2 ++
 arch/frv/include/asm/mman.h     | 2 ++
 arch/h8300/include/asm/mman.h   | 2 ++
 arch/ia64/include/asm/mman.h    | 2 ++
 arch/m32r/include/asm/mman.h    | 2 ++
 arch/m68k/include/asm/mman.h    | 2 ++
 arch/mips/include/asm/mman.h    | 2 ++
 arch/mn10300/include/asm/mman.h | 2 ++
 arch/parisc/include/asm/mman.h  | 2 ++
 arch/powerpc/include/asm/mman.h | 2 ++
 arch/s390/include/asm/mman.h    | 2 ++
 arch/sparc/include/asm/mman.h   | 2 ++
 arch/xtensa/include/asm/mman.h  | 2 ++
 16 files changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/mman.h b/arch/alpha/include/asm/mman.h
index c77c55756a7..99c56d47879 100644
--- a/arch/alpha/include/asm/mman.h
+++ b/arch/alpha/include/asm/mman.h
@@ -28,6 +28,8 @@
 #define MAP_NORESERVE	0x10000		/* don't check for reservations */
 #define MAP_POPULATE	0x20000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x40000		/* do not block on IO */
+#define MAP_STACK	0x80000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x100000	/* create a huge page mapping */
 
 #define MS_ASYNC	1		/* sync memory asynchronously */
 #define MS_SYNC		2		/* synchronous memory sync */
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index fc26976d8e3..6464d471bc7 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -10,6 +10,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h
index 9a92b15f6a6..38cea1b597c 100644
--- a/arch/avr32/include/asm/mman.h
+++ b/arch/avr32/include/asm/mman.h
@@ -10,6 +10,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/cris/include/asm/mman.h b/arch/cris/include/asm/mman.h
index b7f0afba3ce..de6b903b22c 100644
--- a/arch/cris/include/asm/mman.h
+++ b/arch/cris/include/asm/mman.h
@@ -12,6 +12,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h
index 58c1d11e2ac..1939343322b 100644
--- a/arch/frv/include/asm/mman.h
+++ b/arch/frv/include/asm/mman.h
@@ -10,6 +10,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/h8300/include/asm/mman.h b/arch/h8300/include/asm/mman.h
index cf35f0a6f12..eacacd04032 100644
--- a/arch/h8300/include/asm/mman.h
+++ b/arch/h8300/include/asm/mman.h
@@ -10,6 +10,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h
index 48cf8b98a0b..cf55884e7f3 100644
--- a/arch/ia64/include/asm/mman.h
+++ b/arch/ia64/include/asm/mman.h
@@ -18,6 +18,8 @@
 #define MAP_NORESERVE	0x04000		/* don't check for reservations */
 #define MAP_POPULATE	0x08000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/m32r/include/asm/mman.h b/arch/m32r/include/asm/mman.h
index 04a5f40aa40..d191089808f 100644
--- a/arch/m32r/include/asm/mman.h
+++ b/arch/m32r/include/asm/mman.h
@@ -10,6 +10,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
index 9f5c4c4b3c7..c421fef55f5 100644
--- a/arch/m68k/include/asm/mman.h
+++ b/arch/m68k/include/asm/mman.h
@@ -10,6 +10,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h
index f15554d1518..a2250f390a2 100644
--- a/arch/mips/include/asm/mman.h
+++ b/arch/mips/include/asm/mman.h
@@ -46,6 +46,8 @@
 #define MAP_LOCKED	0x8000		/* pages are locked */
 #define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x20000		/* do not block on IO */
+#define MAP_STACK	0x40000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x80000		/* create a huge page mapping */
 
 /*
  * Flags for msync
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
index d04fac1da5a..94611c356bb 100644
--- a/arch/mn10300/include/asm/mman.h
+++ b/arch/mn10300/include/asm/mman.h
@@ -21,6 +21,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/parisc/include/asm/mman.h b/arch/parisc/include/asm/mman.h
index a12d9d43f50..9749c8afe83 100644
--- a/arch/parisc/include/asm/mman.h
+++ b/arch/parisc/include/asm/mman.h
@@ -22,6 +22,8 @@
 #define MAP_GROWSDOWN	0x8000		/* stack-like segment */
 #define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x20000		/* do not block on IO */
+#define MAP_STACK	0x40000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x80000		/* create a huge page mapping */
 
 #define MS_SYNC		1		/* synchronous memory sync */
 #define MS_ASYNC	2		/* sync memory asynchronously */
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
index 7b1c49811a2..d4a7f645c5d 100644
--- a/arch/powerpc/include/asm/mman.h
+++ b/arch/powerpc/include/asm/mman.h
@@ -25,6 +25,8 @@
 
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #ifdef __KERNEL__
 #ifdef CONFIG_PPC64
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
index f63fe7b431e..22714ca181a 100644
--- a/arch/s390/include/asm/mman.h
+++ b/arch/s390/include/asm/mman.h
@@ -18,6 +18,8 @@
 #define MAP_NORESERVE	0x4000		/* don't check for reservations */
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
index 988192e8e95..c3029ad6619 100644
--- a/arch/sparc/include/asm/mman.h
+++ b/arch/sparc/include/asm/mman.h
@@ -20,6 +20,8 @@
 
 #define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/xtensa/include/asm/mman.h b/arch/xtensa/include/asm/mman.h
index 6e55b4d1f9c..fca4db425f6 100644
--- a/arch/xtensa/include/asm/mman.h
+++ b/arch/xtensa/include/asm/mman.h
@@ -53,6 +53,8 @@
 #define MAP_LOCKED	0x8000		/* pages are locked */
 #define MAP_POPULATE	0x10000		/* populate (prefault) pagetables */
 #define MAP_NONBLOCK	0x20000		/* do not block on IO */
+#define MAP_STACK	0x40000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x80000		/* create a huge page mapping */
 
 /*
  * Flags for msync
-- 
cgit v1.2.3


From 6e17b17f1fc7b2f24383a693d63550d9e1460081 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 21 Sep 2009 17:03:48 -0700
Subject: mm: remove duplicate asm/mman.h files

A number of architectures have identical asm/mman.h files so they can all
be merged by using the new generic file.

The remaining asm/mman.h files are substantially different from each
other.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/include/asm/mman.h     | 20 +-------------------
 arch/avr32/include/asm/mman.h   | 20 +-------------------
 arch/cris/include/asm/mman.h    | 22 +---------------------
 arch/frv/include/asm/mman.h     | 21 +--------------------
 arch/h8300/include/asm/mman.h   | 20 +-------------------
 arch/ia64/include/asm/mman.h    | 16 ++--------------
 arch/m32r/include/asm/mman.h    | 20 +-------------------
 arch/m68k/include/asm/mman.h    | 20 +-------------------
 arch/mn10300/include/asm/mman.h | 31 +------------------------------
 arch/s390/include/asm/mman.h    | 15 +--------------
 10 files changed, 11 insertions(+), 194 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index 6464d471bc7..8eebf89f5ab 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -1,19 +1 @@
-#ifndef __ARM_MMAN_H__
-#define __ARM_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ARM_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h
index 38cea1b597c..8eebf89f5ab 100644
--- a/arch/avr32/include/asm/mman.h
+++ b/arch/avr32/include/asm/mman.h
@@ -1,19 +1 @@
-#ifndef __ASM_AVR32_MMAN_H__
-#define __ASM_AVR32_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ASM_AVR32_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/cris/include/asm/mman.h b/arch/cris/include/asm/mman.h
index de6b903b22c..8eebf89f5ab 100644
--- a/arch/cris/include/asm/mman.h
+++ b/arch/cris/include/asm/mman.h
@@ -1,21 +1 @@
-#ifndef __CRIS_MMAN_H__
-#define __CRIS_MMAN_H__
-
-/* verbatim copy of asm-i386/ version */
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __CRIS_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/asm/mman.h
index 1939343322b..8eebf89f5ab 100644
--- a/arch/frv/include/asm/mman.h
+++ b/arch/frv/include/asm/mman.h
@@ -1,20 +1 @@
-#ifndef __ASM_MMAN_H__
-#define __ASM_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ASM_MMAN_H__ */
-
+#include <asm-generic/mman.h>
diff --git a/arch/h8300/include/asm/mman.h b/arch/h8300/include/asm/mman.h
index eacacd04032..8eebf89f5ab 100644
--- a/arch/h8300/include/asm/mman.h
+++ b/arch/h8300/include/asm/mman.h
@@ -1,19 +1 @@
-#ifndef __H8300_MMAN_H__
-#define __H8300_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __H8300_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h
index cf55884e7f3..4459028e5aa 100644
--- a/arch/ia64/include/asm/mman.h
+++ b/arch/ia64/include/asm/mman.h
@@ -8,21 +8,9 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
 
-#include <asm-generic/mman-common.h>
+#include <asm-generic/mman.h>
 
-#define MAP_GROWSDOWN	0x00100		/* stack-like segment */
-#define MAP_GROWSUP	0x00200		/* register stack-like segment */
-#define MAP_DENYWRITE	0x00800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x01000		/* mark it as an executable */
-#define MAP_LOCKED	0x02000		/* pages are locked */
-#define MAP_NORESERVE	0x04000		/* don't check for reservations */
-#define MAP_POPULATE	0x08000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
+#define MAP_GROWSUP	0x0200		/* register stack-like segment */
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/m32r/include/asm/mman.h b/arch/m32r/include/asm/mman.h
index d191089808f..8eebf89f5ab 100644
--- a/arch/m32r/include/asm/mman.h
+++ b/arch/m32r/include/asm/mman.h
@@ -1,19 +1 @@
-#ifndef __M32R_MMAN_H__
-#define __M32R_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __M32R_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
index c421fef55f5..8eebf89f5ab 100644
--- a/arch/m68k/include/asm/mman.h
+++ b/arch/m68k/include/asm/mman.h
@@ -1,19 +1 @@
-#ifndef __M68K_MMAN_H__
-#define __M68K_MMAN_H__
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __M68K_MMAN_H__ */
+#include <asm-generic/mman.h>
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
index 94611c356bb..8eebf89f5ab 100644
--- a/arch/mn10300/include/asm/mman.h
+++ b/arch/mn10300/include/asm/mman.h
@@ -1,30 +1 @@
-/* MN10300 Constants for mmap and co.
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * - Derived from asm-x86/mman.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_MMAN_H
-#define _ASM_MMAN_H
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* _ASM_MMAN_H */
+#include <asm-generic/mman.h>
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
index 22714ca181a..4e9c8ae0a63 100644
--- a/arch/s390/include/asm/mman.h
+++ b/arch/s390/include/asm/mman.h
@@ -9,20 +9,7 @@
 #ifndef __S390_MMAN_H__
 #define __S390_MMAN_H__
 
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
+#include <asm-generic/mman.h>
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__) && defined(CONFIG_64BIT)
 int s390_mmap_check(unsigned long addr, unsigned long len);
-- 
cgit v1.2.3


From 6e0c9e77771e08b171c4abeb073285d8fb03f528 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 21 Sep 2009 17:03:58 -0700
Subject: h8300: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/h8300/include/asm/hardirq.h | 15 +++------------
 arch/h8300/kernel/irq.c          |  5 -----
 2 files changed, 3 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/h8300/include/asm/hardirq.h b/arch/h8300/include/asm/hardirq.h
index 9d7f7a7462b..c2e1aa0f0d1 100644
--- a/arch/h8300/include/asm/hardirq.h
+++ b/arch/h8300/include/asm/hardirq.h
@@ -1,18 +1,7 @@
 #ifndef __H8300_HARDIRQ_H
 #define __H8300_HARDIRQ_H
 
-#include <linux/kernel.h>
-#include <linux/threads.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-extern void ack_bad_irq(unsigned int irq);
+#include <asm/irq.h>
 
 #define HARDIRQ_BITS	8
 
@@ -25,4 +14,6 @@ extern void ack_bad_irq(unsigned int irq);
 # error HARDIRQ_BITS is too low!
 #endif
 
+#include <asm-generic/hardirq.h>
+
 #endif
diff --git a/arch/h8300/kernel/irq.c b/arch/h8300/kernel/irq.c
index 74f8dd7b34d..5c913d47211 100644
--- a/arch/h8300/kernel/irq.c
+++ b/arch/h8300/kernel/irq.c
@@ -81,11 +81,6 @@ struct irq_chip h8300irq_chip = {
 	.end		= h8300_end_irq,
 };
 
-void ack_bad_irq(unsigned int irq)
-{
-	printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
 #if defined(CONFIG_RAMKERNEL)
 static unsigned long __init *get_vector_address(void)
 {
-- 
cgit v1.2.3


From 4f543fa41e78bd366123424a3378f2f4918c0f33 Mon Sep 17 00:00:00 2001
From: john stultz <johnstul@us.ibm.com>
Date: Mon, 21 Sep 2009 17:04:00 -0700
Subject: alpha: convert to use arch_gettimeoffset()

Converts alpha to use GENERIC_TIME via the arch_getoffset()
infrastructure, reducing the amount of arch specific code we need to
maintain.

I suspect the alpha arch could even be further improved to provide and
rpcc() based clocksource, but not having the hardware, I don't feel
comfortable attempting the more complicated conversion (but I'd be glad to
help if anyone else is interested).

[akpm@linux-foundation.org: fix build]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/Kconfig       |  8 +++++
 arch/alpha/kernel/time.c | 79 +++++-------------------------------------------
 2 files changed, 15 insertions(+), 72 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 9fb8aae5c39..443448154f3 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -45,6 +45,14 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config GENERIC_TIME
+	bool
+	default y
+
+config ARCH_USES_GETTIMEOFFSET
+	bool
+	default y
+
 config ZONE_DMA
 	bool
 	default y
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index b04e2cbf23a..5d0826654c6 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -408,28 +408,17 @@ time_init(void)
  * part.  So we can't do the "find absolute time in terms of cycles" thing
  * that the other ports do.
  */
-void
-do_gettimeofday(struct timeval *tv)
+u32 arch_gettimeoffset(void)
 {
-	unsigned long flags;
-	unsigned long sec, usec, seq;
-	unsigned long delta_cycles, delta_usec, partial_tick;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-
-		delta_cycles = rpcc() - state.last_time;
-		sec = xtime.tv_sec;
-		usec = (xtime.tv_nsec / 1000);
-		partial_tick = state.partial_tick;
-
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
 #ifdef CONFIG_SMP
 	/* Until and unless we figure out how to get cpu cycle counters
 	   in sync and keep them there, we can't use the rpcc tricks.  */
-	delta_usec = 0;
+	return 0;
 #else
+	unsigned long delta_cycles, delta_usec, partial_tick;
+
+	delta_cycles = rpcc() - state.last_time;
+	partial_tick = state.partial_tick;
 	/*
 	 * usec = cycles * ticks_per_cycle * 2**48 * 1e6 / (2**48 * ticks)
 	 *	= cycles * (s_t_p_c) * 1e6 / (2**48 * ticks)
@@ -446,64 +435,10 @@ do_gettimeofday(struct timeval *tv)
 	delta_usec = (delta_cycles * state.scaled_ticks_per_cycle 
 		      + partial_tick) * 15625;
 	delta_usec = ((delta_usec / ((1UL << (FIX_SHIFT-6-1)) * HZ)) + 1) / 2;
+	return delta_usec * 1000;
 #endif
-
-	usec += delta_usec;
-	if (usec >= 1000000) {
-		sec += 1;
-		usec -= 1000000;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
 }
 
-EXPORT_SYMBOL(do_gettimeofday);
-
-int
-do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-	unsigned long delta_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-
-	/* The offset that is added into time in do_gettimeofday above
-	   must be subtracted out here to keep a coherent view of the
-	   time.  Without this, a full-tick error is possible.  */
-
-#ifdef CONFIG_SMP
-	delta_nsec = 0;
-#else
-	delta_nsec = rpcc() - state.last_time;
-	delta_nsec = (delta_nsec * state.scaled_ticks_per_cycle 
-		      + state.partial_tick) * 15625;
-	delta_nsec = ((delta_nsec / ((1UL << (FIX_SHIFT-6-1)) * HZ)) + 1) / 2;
-	delta_nsec *= 1000;
-#endif
-
-	nsec -= delta_nsec;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-
 /*
  * In order to set the CMOS clock precisely, set_rtc_mmss has to be
  * called 500 ms after the second nowtime has started, because when
-- 
cgit v1.2.3


From 27258e448eb301cf89e351df87aa8cb916653bf2 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Mon, 21 Sep 2009 17:04:01 -0700
Subject: arch/alpha/boot/tools/objstrip.c: wrong variable tested after open()

The incorrect variable is tested. fd is used for another open()
and is already tested.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/boot/tools/objstrip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index ef183823029..9d0727d18ae 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -93,7 +93,7 @@ main (int argc, char *argv[])
     ofd = 1;
     if (i < argc) {
 	ofd = open(argv[i++], O_WRONLY | O_CREAT | O_TRUNC, 0666);
-	if (fd == -1) {
+	if (ofd == -1) {
 	    perror("open");
 	    exit(1);
 	}
-- 
cgit v1.2.3


From 621731980fe1b19f0a107e17e2af5f8d4411db3e Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Mon, 21 Sep 2009 17:04:01 -0700
Subject: alpha: use printk_once

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/pci_iommu.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index bfb880af959..d15aedfe606 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -268,11 +268,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	   assume it doesn't support sg mapping, and, since we tried to
 	   use direct_map above, it now must be considered an error. */
 	if (! alpha_mv.mv_pci_tbi) {
-		static int been_here = 0; /* Only print the message once. */
-		if (!been_here) {
-		    printk(KERN_WARNING "pci_map_single: no HW sg\n");
-		    been_here = 1;
-		}
+		printk_once(KERN_WARNING "pci_map_single: no HW sg\n");
 		return 0;
 	}
 
-- 
cgit v1.2.3


From 1f693665457539e919856149151b7a7e96550d70 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 21 Sep 2009 17:04:02 -0700
Subject: alpha: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/hardirq.h | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/hardirq.h b/arch/alpha/include/asm/hardirq.h
index 88971460fa6..242c09ba98c 100644
--- a/arch/alpha/include/asm/hardirq.h
+++ b/arch/alpha/include/asm/hardirq.h
@@ -1,17 +1,9 @@
 #ifndef _ALPHA_HARDIRQ_H
 #define _ALPHA_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned long __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 void ack_bad_irq(unsigned int irq);
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif /* _ALPHA_HARDIRQ_H */
-- 
cgit v1.2.3


From d5a6d1739526ed8c383db3dabc232bc15603439a Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Mon, 21 Sep 2009 17:04:03 -0700
Subject: m32r: remove redundant tests on unsigned

`off' and `max_cpus' are unsigned.  When negative they are wrapped and
caught by the other test.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/kernel/ptrace.c  | 5 ++---
 arch/m32r/kernel/smpboot.c | 2 +-
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index 98b8feb12ed..98682bba0ed 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -77,7 +77,7 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 	struct user * dummy = NULL;
 #endif
 
-	if ((off & 3) || (off < 0) || (off > sizeof(struct user) - 3))
+	if ((off & 3) || off > sizeof(struct user) - 3)
 		return -EIO;
 
 	off >>= 2;
@@ -139,8 +139,7 @@ static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
 	struct user * dummy = NULL;
 #endif
 
-	if ((off & 3) || off < 0 ||
-	    off > sizeof(struct user) - 3)
+	if ((off & 3) || off > sizeof(struct user) - 3)
 		return -EIO;
 
 	off >>= 2;
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index 2547d6c4a82..655ea1c47a0 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -213,7 +213,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		if (!physid_isset(phys_id, phys_cpu_present_map))
 			continue;
 
-		if ((max_cpus >= 0) && (max_cpus <= cpucount + 1))
+		if (max_cpus <= cpucount + 1)
 			continue;
 
 		do_boot_cpu(phys_id);
-- 
cgit v1.2.3


From 95ad759c6b0f30ad9aa5efbdbcecb9597238c00f Mon Sep 17 00:00:00 2001
From: john stultz <johnstul@us.ibm.com>
Date: Mon, 21 Sep 2009 17:04:04 -0700
Subject: m32r: convert to use arch_gettimeoffset()

Convert m32r to use GENERIC_TIME via the arch_getoffset() infrastructure,
reducing the amount of arch specific code we need to maintain.

I also noted that m32r doesn't seem to be taking the xtime write lock
before calling do_timer()!  That looks like a pretty bad bug to me.  If
folks agree, let me know and I can move the lock grab to the correct spot.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/Kconfig       |  6 ++++
 arch/m32r/kernel/time.c | 74 ++-----------------------------------------------
 2 files changed, 9 insertions(+), 71 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index cabba332cc4..c41234f1b82 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -41,6 +41,12 @@ config HZ
 	int
 	default 100
 
+config GENERIC_TIME
+	def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
+	def_bool y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index cada3ba4b99..ba61c4c7320 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -48,7 +48,7 @@ extern void smp_local_timer_interrupt(void);
 
 static unsigned long latch;
 
-static unsigned long do_gettimeoffset(void)
+u32 arch_gettimeoffset(void)
 {
 	unsigned long  elapsed_time = 0;  /* [us] */
 
@@ -93,78 +93,9 @@ static unsigned long do_gettimeoffset(void)
 #error no chip configuration
 #endif
 
-	return elapsed_time;
+	return elapsed_time * 1000;
 }
 
-/*
- * This version of gettimeofday has near microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long seq;
-	unsigned long usec, sec;
-	unsigned long max_ntp_tick = tick_usec - tickadj;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-
-		usec = do_gettimeoffset();
-
-		/*
-		 * If time_adjust is negative then NTP is slowing the clock
-		 * so make sure not to go into next possible interval.
-		 * Better to lose some accuracy than have time go backwards..
-		 */
-		if (unlikely(time_adjust < 0))
-			usec = min(usec, max_ntp_tick);
-
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / 1000);
-	} while (read_seqretry(&xtime_lock, seq));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
- 	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= do_gettimeoffset() * NSEC_PER_USEC;
-
-	wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
 /*
  * In order to set the CMOS clock precisely, set_rtc_mmss has to be
  * called 500 ms after the second nowtime has started, because when
@@ -192,6 +123,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING);
 #endif
+	/* XXX FIXME. Uh, the xtime_lock should be held here, no? */
 	do_timer(1);
 
 #ifndef CONFIG_SMP
-- 
cgit v1.2.3


From ef187fd799c50e15dbb56a0286c81bf467bd0201 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 21 Sep 2009 17:04:04 -0700
Subject: m32r: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/include/asm/hardirq.h | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/include/asm/hardirq.h b/arch/m32r/include/asm/hardirq.h
index cb8aa762f23..4c31c0ae215 100644
--- a/arch/m32r/include/asm/hardirq.h
+++ b/arch/m32r/include/asm/hardirq.h
@@ -2,14 +2,7 @@
 #ifndef __ASM_HARDIRQ_H
 #define __ASM_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+#include <asm/irq.h>
 
 #if NR_IRQS > 256
 #define HARDIRQ_BITS	9
@@ -26,11 +19,7 @@ typedef struct {
 # error HARDIRQ_BITS is too low!
 #endif
 
-static inline void ack_bad_irq(int irq)
-{
-	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
-	BUG();
-}
+#include <asm-generic/hardirq.h>
 
 #endif /* __ASM_HARDIRQ_H */
 #endif /* __KERNEL__ */
-- 
cgit v1.2.3


From 4ad4c76b7afb71774b846b322ad2ae42f814331a Mon Sep 17 00:00:00 2001
From: john stultz <johnstul@us.ibm.com>
Date: Mon, 21 Sep 2009 17:04:05 -0700
Subject: m68k: convert to use arch_gettimeoffset()

Convert m68k to use GENERIC_TIME via the arch_getoffset() infrastructure,
reducing the amount of arch specific code we need to maintain.

I've taken my best swing at converting this, but I'm not 100% confident
I got it right. My cross-compiler is now out of date (gcc4.2) so I
wasn't able to  check if it compiled. Any assistance from arch
maintainers or testers to get this merged would be great.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/Kconfig       |  6 +++++
 arch/m68k/kernel/time.c | 70 ++-----------------------------------------------
 2 files changed, 8 insertions(+), 68 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index fb87c08c6b5..29dd8489ffe 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -58,6 +58,12 @@ config HZ
 	int
 	default 100
 
+config GENERIC_TIME
+	def_bool y
+
+config ARCH_USES_GETTIMEOFFSET
+	def_bool y
+
 mainmenu "Linux/68k Kernel Configuration"
 
 source "init/Kconfig"
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 54d980795fc..17dc2a31a7c 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -91,77 +91,11 @@ void __init time_init(void)
 	mach_sched_init(timer_interrupt);
 }
 
-/*
- * This version of gettimeofday has near microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
+u32 arch_gettimeoffset(void)
 {
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-	unsigned long max_ntp_tick = tick_usec - tickadj;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-
-		usec = mach_gettimeoffset();
-
-		/*
-		 * If time_adjust is negative then NTP is slowing the clock
-		 * so make sure not to go into next possible interval.
-		 * Better to lose some accuracy than have time go backwards..
-		 */
-		if (unlikely(time_adjust < 0))
-			usec = min(usec, max_ntp_tick);
-
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec/1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/* This is revolting. We need to set the xtime.tv_nsec
-	 * correctly. However, the value in this location is
-	 * is value at the last tick.
-	 * Discover what correction gettimeofday
-	 * would have done, and then undo it!
-	 */
-	nsec -= 1000 * mach_gettimeoffset();
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
+	return mach_gettimeoffset() * 1000;
 }
 
-EXPORT_SYMBOL(do_settimeofday);
-
-
 static int __init rtc_init(void)
 {
 	struct platform_device *pdev;
-- 
cgit v1.2.3


From 45d80eea87c9f8292d2d33173d6866c0ec57238a Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 21 Sep 2009 17:04:07 -0700
Subject: m68k: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/include/asm/hardirq_mm.h | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h
index 394ee946015..554f65b6cd3 100644
--- a/arch/m68k/include/asm/hardirq_mm.h
+++ b/arch/m68k/include/asm/hardirq_mm.h
@@ -1,16 +1,8 @@
 #ifndef __M68K_HARDIRQ_H
 #define __M68K_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
 #define HARDIRQ_BITS	8
 
+#include <asm-generic/hardirq.h>
+
 #endif
-- 
cgit v1.2.3


From db4e5cbe2f201c6abd51f7dfe41dbd2589affeba Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 21 Sep 2009 17:04:10 -0700
Subject: um: convert to asm-generic/hardirq.h

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/asm/hardirq.h | 26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/um/include/asm/hardirq.h b/arch/um/include/asm/hardirq.h
index 313ebb8a256..fb3c05a0cbb 100644
--- a/arch/um/include/asm/hardirq.h
+++ b/arch/um/include/asm/hardirq.h
@@ -1,25 +1 @@
-/* (c) 2004 cw@f00f.org, GPLv2 blah blah */
-
-#ifndef __ASM_UM_HARDIRQ_H
-#define __ASM_UM_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-/* NOTE: When SMP works again we might want to make this
- * ____cacheline_aligned or maybe use per_cpu state? --cw */
-typedef struct {
-	unsigned int __softirq_pending;
-} irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>
-
-/* As this would be very strange for UML to get we BUG() after the
- * printk. */
-static inline void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_ERR "unexpected IRQ %02x\n", irq);
-	BUG();
-}
-
-#endif /* __ASM_UM_HARDIRQ_H */
+#include <asm-generic/hardirq.h>
-- 
cgit v1.2.3


From 4d04c70754eec6d0fd342a5bc3f684db69cc2226 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Mon, 21 Sep 2009 17:04:11 -0700
Subject: uml: fix order of pud and pmd_free()

If pmd_alloc() fails we should only free the prior allocated pud, if
pte_alloc_map() fails, we should free pmd as well.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/kernel/skas/mmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index 0cd9a7a05e7..8bfd1e90581 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -38,10 +38,10 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
 	*pte = pte_mkread(*pte);
 	return 0;
 
- out_pmd:
-	pud_free(mm, pud);
  out_pte:
 	pmd_free(mm, pmd);
+ out_pmd:
+	pud_free(mm, pud);
  out:
 	return -ENOMEM;
 }
-- 
cgit v1.2.3


From 8b1c9befbfbd443bd95e77db01c70f1741aa2511 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 18 Sep 2009 16:32:44 -0400
Subject: m32r: make PAGE_SIZE available to assembly.

page.h includes ifndef __ASSEMBLY__ guards, but PAGE_SIZE is defined
using "1UL", which the assembler does not support. Use the _AC macro
from const.h to make it available to assembly (and linker scripts).

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/include/asm/page.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m32r/include/asm/page.h b/arch/m32r/include/asm/page.h
index 11777f7a562..725ede8f288 100644
--- a/arch/m32r/include/asm/page.h
+++ b/arch/m32r/include/asm/page.h
@@ -1,9 +1,11 @@
 #ifndef _ASM_M32R_PAGE_H
 #define _ASM_M32R_PAGE_H
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	12
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
-- 
cgit v1.2.3


From a7efb879ab5b07726873ace8305373bdf68be8a8 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 18 Sep 2009 16:32:45 -0400
Subject: m32r: Define THREAD_SIZE only once.

Previously, m32r's asm/thread_info.h defined THREAD_SIZE differently
for assembly and C code; now that PAGE_SIZE is usable from assembly,
these can be combined.  Also, m32r's asm/processor.h redefines
THREAD_SIZE to the same value; remove this redundant definition.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/include/asm/processor.h   | 2 --
 arch/m32r/include/asm/thread_info.h | 6 ++----
 2 files changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/include/asm/processor.h b/arch/m32r/include/asm/processor.h
index 1a997fc148a..8397c249989 100644
--- a/arch/m32r/include/asm/processor.h
+++ b/arch/m32r/include/asm/processor.h
@@ -140,8 +140,6 @@ unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  ((tsk)->thread.lr)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define THREAD_SIZE (2*PAGE_SIZE)
-
 #define cpu_relax()	barrier()
 
 #endif /* _ASM_M32R_PROCESSOR_H */
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 71578151a40..4d6616936c3 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -55,6 +55,8 @@ struct thread_info {
 
 #define PREEMPT_ACTIVE		0x10000000
 
+#define THREAD_SIZE (PAGE_SIZE << 1)
+
 /*
  * macros/functions for gaining access to the thread information structure
  */
@@ -76,8 +78,6 @@ struct thread_info {
 #define init_thread_info	(init_thread_union.thread_info)
 #define init_stack		(init_thread_union.stack)
 
-#define THREAD_SIZE (2*PAGE_SIZE)
-
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
 {
@@ -127,8 +127,6 @@ static inline unsigned int get_thread_fault_code(void)
 
 #else /* !__ASSEMBLY__ */
 
-#define THREAD_SIZE	8192
-
 /* how to get the thread information struct from ASM */
 #define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
 	.macro GET_THREAD_INFO reg
-- 
cgit v1.2.3


From 00b01b246bc2e28763cbd85f0dc949d6c0d38c13 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 18 Sep 2009 16:32:46 -0400
Subject: m32r: Move GET_THREAD_INFO definition out of asm/thread_info.h.

Previously, asm/thread_info.h was not usable from linker scripts
because it contains a piece of .macro code.  Since that code was only
used in the m32r entry.S, the right fix is probably to move the macro
there.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/include/asm/thread_info.h | 9 ---------
 arch/m32r/kernel/entry.S            | 7 +++++++
 2 files changed, 7 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 4d6616936c3..ed240b6e8e7 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -125,15 +125,6 @@ static inline unsigned int get_thread_fault_code(void)
 	return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
 }
 
-#else /* !__ASSEMBLY__ */
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
-	.macro GET_THREAD_INFO reg
-	ldi	\reg, #-THREAD_SIZE
-	and	\reg, sp
-	.endm
-
 #endif
 
 /*
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 612d35b082a..403869833b9 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -118,6 +118,13 @@
 #define resume_kernel		restore_all
 #endif
 
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
+	.macro GET_THREAD_INFO reg
+	ldi	\reg, #-THREAD_SIZE
+	and	\reg, sp
+	.endm
+
 ENTRY(ret_from_fork)
 	pop	r0
 	bl	schedule_tail
-- 
cgit v1.2.3


From 2a67d26284c31e676bcf3891ad8cee75e87fbada Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 18 Sep 2009 16:32:47 -0400
Subject: m32r: Remove unused .altinstructions and .exit.* code from linker
 script.

It appears that m32r copied the .altinstructions definition from x86
when the architecture was first merged into Linux.  m32r doesn't put
anything in .altinstructions, so this is just dead code.

The following block affecting .exit.text/.exit.data, which has a
comment also copied from x86, should also be deleted; the linker
script later discards the .exit.text and .exit.data sections.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/vmlinux.lds.S | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index de5e21cca6a..a8aa4a858dd 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -91,15 +91,6 @@ SECTIONS
   .con_initcall.init : { *(.con_initcall.init) }
   __con_initcall_end = .;
   SECURITY_INIT
-  . = ALIGN(4);
-  __alt_instructions = .;
-  .altinstructions : { *(.altinstructions) }
-  __alt_instructions_end = .;
-  .altinstr_replacement : { *(.altinstr_replacement) }
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : { EXIT_TEXT }
-  .exit.data : { EXIT_DATA }
 
 #ifdef CONFIG_BLK_DEV_INITRD
   . = ALIGN(4096);
-- 
cgit v1.2.3


From 743486dff1d03eb4a67bd75402699629f70cd5b4 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 18 Sep 2009 16:32:48 -0400
Subject: m32r: Move the spi_stack_top and spu_stack_top into .init.data
 section.

Since these get squashed into the .data output section by the m32r
linker script, it seems likely that they don't need their own input
sections.

At Hirokazu Takata's suggestion, we place these structures in
.init.data rather than just placing them in .data (since they are only
used at init time).

This patch is preparation for cleaning up the m32r architecture to use
the new macros in vmlinux.lds.h; if these sections are indeed not
needed, then we can use the RW_DATA_SECTION macro for m32r and save a
bunch of redundant code.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/head.S        | 4 ++--
 arch/m32r/kernel/vmlinux.lds.S | 2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index 0a7194439eb..a46652dd83e 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -268,13 +268,13 @@ ENTRY(empty_zero_page)
 /*------------------------------------------------------------------------
  * Stack area
  */
-	.section .spi
+	.section .init.data, "aw"
 	ALIGN
 	.global spi_stack_top
 	.zero	1024
 spi_stack_top:
 
-	.section .spu
+	.section .init.data, "aw"
 	ALIGN
 	.global spu_stack_top
 	.zero	1024
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index a8aa4a858dd..aadb24eacf0 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -49,8 +49,6 @@ SECTIONS
 
   /* writeable */
   .data : {			/* Data */
-	*(.spu)
-	*(.spi)
 	DATA_DATA
 	CONSTRUCTORS
 	}
-- 
cgit v1.2.3


From 85233c43f7fece10a3ea8ed34f0d546b8dd3a435 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 18 Sep 2009 16:32:49 -0400
Subject: m32r: Cleanup linker script using new linker script macros.

This patch is largely a straightforward conversion.  One thing to note
is that the new macros use fewer separate output sections than the old
code; this should have no functional impact but is relevant for people
objdumping vmlinux files.

Also note that it moves the .data.init_task output sections inside
_edata.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/vmlinux.lds.S | 67 ++++++------------------------------------
 1 file changed, 9 insertions(+), 58 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index aadb24eacf0..8ceb6181d80 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -4,6 +4,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_ARCH(m32r)
 #if defined(__LITTLE_ENDIAN__)
@@ -40,72 +41,22 @@ SECTIONS
 #endif
   _etext = .;			/* End of text section */
 
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
+  EXCEPTION_TABLE(16)
   RODATA
-
-  /* writeable */
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	}
-
-  . = ALIGN(4096);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
+  RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
   _edata = .;			/* End of data section */
 
-  . = ALIGN(8192);		/* init_task */
-  .data.init_task : { *(.data.init_task) }
-
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  .init.data : { INIT_DATA }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-  SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  PERCPU(4096)
-  . = ALIGN(4096);
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
+  PERCPU(PAGE_SIZE)
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 
-  __bss_start = .;		/* BSS */
-  .bss : { *(.bss) }
-  . = ALIGN(4);
-  __bss_stop = .;
+  BSS_SECTION(0, 0, 4)
 
   _end = . ;
 
-- 
cgit v1.2.3


From 3967684006f30c253bc6d4a6604d1bad4a7fc672 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 22 Sep 2009 15:50:24 +0200
Subject: x86: mce: Clean up thermal throttling state tracking code

Instead of a mess of three separate percpu variables, consolidate
the state into a single structure.

Also clean up therm_throt_process(), use cleaner and more
understandable variable names and a clearer logic.

This, without changing the logic, makes the code more
streamlined, more readable and smaller as well:

   text	   data	    bss	    dec	    hex	filename
   1487	    169	      4	   1660	    67c	therm_throt.o.before
   1432	    176	      4	   1612	    64c	therm_throt.o.after

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 63 ++++++++++++++++++++------------
 1 file changed, 39 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 63a56d147e4..db80b577f60 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -34,20 +34,30 @@
 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL		(300 * HZ)
 
-static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
-static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
-static DEFINE_PER_CPU(bool, thermal_throttle_active);
+/*
+ * Current thermal throttling state:
+ */
+struct thermal_state {
+	bool			is_throttled;
+
+	u64			next_check;
+	unsigned long		throttle_count;
+};
+
+static DEFINE_PER_CPU(struct thermal_state, thermal_state);
 
-static atomic_t therm_throt_en		= ATOMIC_INIT(0);
+static atomic_t therm_throt_en	= ATOMIC_INIT(0);
 
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
 	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
 
 #define define_therm_throt_sysdev_show_func(name)			\
-static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,	\
-					struct sysdev_attribute *attr,	\
-					      char *buf)		\
+									\
+static ssize_t therm_throt_sysdev_show_##name(				\
+			struct sys_device *dev,				\
+			struct sysdev_attribute *attr,			\
+			char *buf)					\
 {									\
 	unsigned int cpu = dev->id;					\
 	ssize_t ret;							\
@@ -55,7 +65,7 @@ static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,	\
 	preempt_disable();	/* CPU hotplug */			\
 	if (cpu_online(cpu))						\
 		ret = sprintf(buf, "%lu\n",				\
-			      per_cpu(thermal_throttle_##name, cpu));	\
+			      per_cpu(thermal_state, cpu).name);	\
 	else								\
 		ret = 0;						\
 	preempt_enable();						\
@@ -63,11 +73,11 @@ static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,	\
 	return ret;							\
 }
 
-define_therm_throt_sysdev_show_func(count);
-define_therm_throt_sysdev_one_ro(count);
+define_therm_throt_sysdev_show_func(throttle_count);
+define_therm_throt_sysdev_one_ro(throttle_count);
 
 static struct attribute *thermal_throttle_attrs[] = {
-	&attr_count.attr,
+	&attr_throttle_count.attr,
 	NULL
 };
 
@@ -93,33 +103,38 @@ static struct attribute_group thermal_throttle_attr_group = {
  *          1 : Event should be logged further, and a message has been
  *              printed to the syslog.
  */
-static int therm_throt_process(int curr)
+static int therm_throt_process(bool is_throttled)
 {
-	unsigned int cpu = smp_processor_id();
-	__u64 tmp_jiffs = get_jiffies_64();
-	bool was_throttled = __get_cpu_var(thermal_throttle_active);
-	bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
+	struct thermal_state *state;
+	unsigned int this_cpu;
+	bool was_throttled;
+	u64 now;
+
+	this_cpu = smp_processor_id();
+	now = get_jiffies_64();
+	state = &per_cpu(thermal_state, this_cpu);
+
+	was_throttled = state->is_throttled;
+	state->is_throttled = is_throttled;
 
 	if (is_throttled)
-		__get_cpu_var(thermal_throttle_count)++;
+		state->throttle_count++;
 
 	if (!(was_throttled ^ is_throttled) &&
-	    time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+			time_before64(now, state->next_check))
 		return 0;
 
-	__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
+	state->next_check = now + CHECK_INTERVAL;
 
 	/* if we just entered the thermal event */
 	if (is_throttled) {
-		printk(KERN_CRIT "CPU%d: Temperature above threshold, "
-		       "cpu clock throttled (total events = %lu)\n",
-		       cpu, __get_cpu_var(thermal_throttle_count));
+		printk(KERN_CRIT "CPU%d: Temperature above threshold, cpu clock throttled (total events = %lu)\n", this_cpu, state->throttle_count);
 
 		add_taint(TAINT_MACHINE_CHECK);
 		return 1;
 	}
 	if (was_throttled) {
-		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", this_cpu);
 		return 1;
 	}
 
@@ -213,7 +228,7 @@ static void intel_thermal_interrupt(void)
 	__u64 msr_val;
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
+	if (therm_throt_process((msr_val & THERM_STATUS_PROCHOT) != 0))
 		mce_log_therm_throt_event(msr_val);
 }
 
-- 
cgit v1.2.3


From b417c9fd8690637f0c91479435ab3e2bf450c038 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 22 Sep 2009 15:50:24 +0200
Subject: x86: mce: Fix thermal throttling message storm

If a system switches back and forth between hot and cold mode,
the MCE code will print a stream of critical kernel messages.

Extend the throttling code to properly notice this, by
only printing the first hot + cold transition and omitting
the rest up to CHECK_INTERVAL (5 minutes).

This way we'll only get a single incident of:

 [  102.356584] CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
 [  102.357000] Disabling lock debugging due to kernel taint
 [  102.369223] CPU0: Temperature/speed normal

Every 5 minutes. The 'total events' count tells the number of cold/hot
transitions detected, should overheating occur after 5 minutes again:

[  402.357580] CPU0: Temperature above threshold, cpu clock throttled (total events = 24891)
[  402.358001] CPU0: Temperature/speed normal
[  450.704142] Machine check events logged

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index db80b577f60..b3a1dba7533 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -42,6 +42,7 @@ struct thermal_state {
 
 	u64			next_check;
 	unsigned long		throttle_count;
+	unsigned long		last_throttle_count;
 };
 
 static DEFINE_PER_CPU(struct thermal_state, thermal_state);
@@ -120,11 +121,12 @@ static int therm_throt_process(bool is_throttled)
 	if (is_throttled)
 		state->throttle_count++;
 
-	if (!(was_throttled ^ is_throttled) &&
-			time_before64(now, state->next_check))
+	if (time_before64(now, state->next_check) &&
+			state->throttle_count != state->last_throttle_count)
 		return 0;
 
 	state->next_check = now + CHECK_INTERVAL;
+	state->last_throttle_count = state->throttle_count;
 
 	/* if we just entered the thermal event */
 	if (is_throttled) {
-- 
cgit v1.2.3


From 14c0abf14a5e67e793131116bd97f57da37ccce3 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Tue, 22 Sep 2009 14:35:57 +0800
Subject: x86: mce, inject: Use real inject-msg in raise_local

Current raise_local() uses a struct mce that comes from mce_write()
as a parameter instead of the real inject-msg, so when we set
mce.finished = 0 to clear injected MCE, the real inject stays
valid.

This will cause the remaining inject-msg affect the next injection,
which is not desired.

To fix this, real inject-msg is used in raise_local instead of the
one on the stack.

This patch is based on the diagnosis and the fixes by Dean Nelson.

Reported-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <1253601357.15717.757.camel@yhuang-dev.sh.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce-inject.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 7029f0e2aca..472763d9209 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -98,8 +98,9 @@ static struct notifier_block mce_raise_nb = {
 };
 
 /* Inject mce on current CPU */
-static int raise_local(struct mce *m)
+static int raise_local(void)
 {
+	struct mce *m = &__get_cpu_var(injectm);
 	int context = MCJ_CTX(m->inject_flags);
 	int ret = 0;
 	int cpu = m->extcpu;
@@ -167,12 +168,12 @@ static void raise_mce(struct mce *m)
 			}
 			cpu_relax();
 		}
-		raise_local(m);
+		raise_local();
 		put_cpu();
 		put_online_cpus();
 	} else
 #endif
-		raise_local(m);
+		raise_local();
 }
 
 /* Error injection interface */
-- 
cgit v1.2.3


From 6ef297f86b62f187c59475784208f75c2ed8ccd8 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 22 Sep 2009 14:29:36 +0100
Subject: ARM: 5720/1: Move MMCI header to amba include dir

This moves the mmci platform data definition struct away from
arch/arm/include/asm/mach/mmc.h into the more proper place among
the other primecells in include/linux/amba/mmci.h and at the same
time renames it to "mmci.h", and also the struct in this file
confusingly named mmc_platform_data has been renamed
mmci_platform_data for clarity.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/mach/mmc.h          | 18 ------------------
 arch/arm/mach-integrator/integrator_cp.c |  4 ++--
 arch/arm/mach-realview/core.c            |  6 +++---
 arch/arm/mach-realview/core.h            |  4 ++--
 arch/arm/mach-realview/realview_eb.c     |  2 +-
 arch/arm/mach-realview/realview_pb1176.c |  2 +-
 arch/arm/mach-realview/realview_pb11mp.c |  2 +-
 arch/arm/mach-realview/realview_pba8.c   |  2 +-
 arch/arm/mach-realview/realview_pbx.c    |  2 +-
 arch/arm/mach-u300/mmc.c                 |  4 ++--
 arch/arm/mach-versatile/core.c           |  4 ++--
 arch/arm/mach-versatile/versatile_pb.c   |  4 ++--
 12 files changed, 18 insertions(+), 36 deletions(-)
 delete mode 100644 arch/arm/include/asm/mach/mmc.h

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
deleted file mode 100644
index 27bec555ee1..00000000000
--- a/arch/arm/include/asm/mach/mmc.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct mmc_platform_data {
-	unsigned int ocr_mask;			/* available voltages */
-	u32 (*translate_vdd)(struct device *, unsigned int);
-	unsigned int (*status)(struct device *);
-	int	gpio_wp;
-	int	gpio_cd;
-	unsigned long capabilities;
-};
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2a318eba1b0..3f35293d457 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -19,6 +19,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/clkdev.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
@@ -400,7 +400,7 @@ static unsigned int mmc_status(struct device *dev)
 	return status & 8;
 }
 
-static struct mmc_platform_data mmc_data = {
+static struct mmci_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 5a5e1f72461..a2083b60e3f 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,6 +30,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
+#include <linux/amba/mmci.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
@@ -44,7 +45,6 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <asm/hardware/gic.h>
 
@@ -237,14 +237,14 @@ static unsigned int realview_mmc_status(struct device *dev)
 	return readl(REALVIEW_SYSMCI) & mask;
 }
 
-struct mmc_platform_data realview_mmc0_plat_data = {
+struct mmci_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 17,
 	.gpio_cd	= 16,
 };
 
-struct mmc_platform_data realview_mmc1_plat_data = {
+struct mmci_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 19,
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 59a337ba4be..46cd6acb4d4 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -47,8 +47,8 @@ static struct amba_device name##_device = {			\
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
-extern struct mmc_platform_data realview_mmc0_plat_data;
-extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct mmci_platform_data realview_mmc0_plat_data;
+extern struct mmci_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *timer0_va_base;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c0795ea3b3a..1d65e64ae57 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-eb.h>
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 395dc18070b..2817fe09931 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb1176.h>
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index c0c9e35e6e3..94680fcf726 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -38,7 +39,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb11mp.h>
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 4fc64e146c3..941beb2b970 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index cf68b542606..7e4bc6cdca5 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 82af247760e..7b6b016786b 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -19,8 +19,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/amba/mmci.h>
 
-#include <asm/mach/mmc.h>
 #include "mmc.h"
 #include "padmux.h"
 
@@ -28,7 +28,7 @@ struct mmci_card_event {
 	struct input_dev *mmc_input;
 	int mmc_inserted;
 	struct work_struct workq;
-	struct mmc_platform_data mmc0_plat_data;
+	struct mmci_platform_data mmc0_plat_data;
 };
 
 static unsigned int mmc_status(struct device *dev)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 975eae41ee6..e13be7c444c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -27,6 +27,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -47,7 +48,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 #include "clock.h"
@@ -369,7 +369,7 @@ unsigned int mmc_status(struct device *dev)
 	return readl(VERSATILE_SYSMCI) & mask;
 }
 
-static struct mmc_platform_data mmc0_plat_data = {
+static struct mmci_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9af8d8154df..239cd30fc4f 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,7 +32,6 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 
@@ -41,7 +41,7 @@
 #define IRQ_MMCI1A	IRQ_SIC_MMCI1A
 #endif
 
-static struct mmc_platform_data mmc1_plat_data = {
+static struct mmci_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
-- 
cgit v1.2.3


From 9173a8ef24a6b1b8031507b35b8ffe5f85a87692 Mon Sep 17 00:00:00 2001
From: Andrew Victor <linux@maxim.org.za>
Date: Tue, 22 Sep 2009 10:47:50 +0100
Subject: ARM: 5719/1: [AT91] Fix AC97 breakage

Fix AC97 build breakage with converting to the shared AT91/AVR32 AC97 driver:
  struct atmel_ac97_data  -> struct ac97c_platform_data
  CONFIG_SND_AT91_AC97 -> CONFIG_SND_ATMEL_AC97C

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91cap9_devices.c | 10 +++++-----
 arch/arm/mach-at91/board-cap9adk.c    |  2 +-
 arch/arm/mach-at91/board-neocore926.c |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 412aa49ad2f..d1f775e8635 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -771,9 +771,9 @@ void __init at91_add_device_pwm(u32 mask) {}
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -789,7 +789,7 @@ static struct resource ac97_resources[] = {
 };
 
 static struct platform_device at91cap9_ac97_device = {
-	.name		= "ac97c",
+	.name		= "atmel_ac97c",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
@@ -800,7 +800,7 @@ static struct platform_device at91cap9_ac97_device = {
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -818,7 +818,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 	platform_device_register(&at91cap9_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 83a1a0fef47..d6940870e40 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -364,7 +364,7 @@ static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
 /*
  * AC97
  */
-static struct atmel_ac97_data cap9adk_ac97_data = {
+static struct ac97c_platform_data cap9adk_ac97_data = {
 //	.reset_pin	= ... not connected
 };
 
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9ba7ba2cc3b..f78a55e5ad0 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -340,7 +340,7 @@ static void __init neocore926_add_device_buttons(void) {}
 /*
  * AC97
  */
-static struct atmel_ac97_data neocore926_ac97_data = {
+static struct ac97c_platform_data neocore926_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
-- 
cgit v1.2.3


From 2d70ca23f86647e076e3a8b64b3a90e583b894d5 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:41 +0200
Subject: [S390] Convert sys_clone to function with parameters.

Use function parameters instead of accessing the pt_regs structure
to get the parameters.
Also merge the 31 and 64 bit versions since they are identical.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/compat_linux.c   | 17 -----------------
 arch/s390/kernel/compat_linux.h   |  1 -
 arch/s390/kernel/compat_wrapper.S |  8 ++++++++
 arch/s390/kernel/entry.h          |  3 ++-
 arch/s390/kernel/process.c        | 10 ++--------
 arch/s390/kernel/syscalls.S       |  2 +-
 6 files changed, 13 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 9ab188d67a3..f741cd49111 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -801,23 +801,6 @@ asmlinkage long sys32_write(unsigned int fd, char __user * buf, size_t count)
 	return sys_write(fd, buf, count);
 }
 
-asmlinkage long sys32_clone(void)
-{
-	struct pt_regs *regs = task_pt_regs(current);
-	unsigned long clone_flags;
-	unsigned long newsp;
-	int __user *parent_tidptr, *child_tidptr;
-
-	clone_flags = regs->gprs[3] & 0xffffffffUL;
-	newsp = regs->orig_gpr2 & 0x7fffffffUL;
-	parent_tidptr = compat_ptr(regs->gprs[4]);
-	child_tidptr = compat_ptr(regs->gprs[5]);
-	if (!newsp)
-		newsp = regs->gprs[15];
-	return do_fork(clone_flags, newsp, regs, 0,
-		       parent_tidptr, child_tidptr);
-}
-
 /*
  * 31 bit emulation wrapper functions for sys_fadvise64/fadvise64_64.
  * These need to rewrite the advise values for POSIX_FADV_{DONTNEED,NOREUSE}
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index 836a2884290..7cceb67ff8a 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -222,7 +222,6 @@ unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg);
 long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg);
 long sys32_read(unsigned int fd, char __user * buf, size_t count);
 long sys32_write(unsigned int fd, char __user * buf, size_t count);
-long sys32_clone(void);
 long sys32_fadvise64(int fd, loff_t offset, size_t len, int advise);
 long sys32_fadvise64_64(struct fadvise64_64_args __user *args);
 long sys32_sigaction(int sig, const struct old_sigaction32 __user *act,
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 624790042d4..28f8440d2ec 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1840,3 +1840,11 @@ sys_perf_event_open_wrapper:
 	lgfr	%r5,%r5			# int
 	llgfr	%r6,%r6			# unsigned long
 	jg	sys_perf_event_open	# branch to system call
+
+	.globl	sys_clone_wrapper
+sys_clone_wrapper:
+	llgfr	%r2,%r2			# unsigned long
+	llgfr	%r3,%r3			# unsigned long
+	llgtr	%r4,%r4			# int *
+	llgtr	%r5,%r5			# int *
+	jg	sys_clone		# branch to system call
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index 950c59c6688..91fd78839c5 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -42,7 +42,8 @@ long sys_s390_fadvise64_64(struct fadvise64_64_args __user *args);
 long sys_s390_fallocate(int fd, int mode, loff_t offset, u32 len_high,
 			u32 len_low);
 long sys_fork(void);
-long sys_clone(void);
+long sys_clone(unsigned long newsp, unsigned long clone_flags,
+	       int __user *parent_tidptr, int __user *child_tidptr);
 long sys_vfork(void);
 void execve_tail(void);
 long sys_execve(void);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 5a43f27eec1..189d978f76d 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -230,17 +230,11 @@ SYSCALL_DEFINE0(fork)
 	return do_fork(SIGCHLD, regs->gprs[15], regs, 0, NULL, NULL);
 }
 
-SYSCALL_DEFINE0(clone)
+SYSCALL_DEFINE4(clone, unsigned long, newsp, unsigned long, clone_flags,
+		int __user *, parent_tidptr, int __user *, child_tidptr)
 {
 	struct pt_regs *regs = task_pt_regs(current);
-	unsigned long clone_flags;
-	unsigned long newsp;
-	int __user *parent_tidptr, *child_tidptr;
 
-	clone_flags = regs->gprs[3];
-	newsp = regs->orig_gpr2;
-	parent_tidptr = (int __user *) regs->gprs[4];
-	child_tidptr = (int __user *) regs->gprs[5];
 	if (!newsp)
 		newsp = regs->gprs[15];
 	return do_fork(clone_flags, newsp, regs, 0,
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 0b5083681e7..ff79d58e0eb 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -128,7 +128,7 @@ SYSCALL(sys_sysinfo,sys_sysinfo,compat_sys_sysinfo_wrapper)
 SYSCALL(sys_ipc,sys_ipc,sys32_ipc_wrapper)
 SYSCALL(sys_fsync,sys_fsync,sys32_fsync_wrapper)
 SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
-SYSCALL(sys_clone,sys_clone,sys32_clone)			/* 120 */
+SYSCALL(sys_clone,sys_clone,sys_clone_wrapper)			/* 120 */
 SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
 SYSCALL(sys_newuname,sys_s390_newuname,sys32_newuname_wrapper)
 NI_SYSCALL							/* modify_ldt for i386 */
-- 
cgit v1.2.3


From 3e86a8c617413e344143839c514e9b0c1713065c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:42 +0200
Subject: [S390] Convert sys_execve to function with parameters.

Use function parameters instead of accessing the pt_regs structure
to get the parameters.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/compat_linux.c   | 33 ++++++++++++++-------------------
 arch/s390/kernel/compat_linux.h   |  3 ++-
 arch/s390/kernel/compat_wrapper.S |  7 +++++++
 arch/s390/kernel/entry.h          |  3 ++-
 arch/s390/kernel/process.c        | 30 +++++++++++++-----------------
 arch/s390/kernel/syscalls.S       |  2 +-
 6 files changed, 39 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index f741cd49111..05cf446e60b 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -443,31 +443,26 @@ sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
  * sys32_execve() executes a new program after the asm stub has set
  * things up for us.  This should basically do what I want it to.
  */
-asmlinkage long sys32_execve(void)
+asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
+			     compat_uptr_t __user *envp)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	char *filename;
-	unsigned long result;
-	int rc;
-
-	filename = getname(compat_ptr(regs->orig_gpr2));
-	if (IS_ERR(filename)) {
-		result = PTR_ERR(filename);
-                goto out;
-	}
-	rc = compat_do_execve(filename, compat_ptr(regs->gprs[3]),
-			      compat_ptr(regs->gprs[4]), regs);
-	if (rc) {
-		result = rc;
-		goto out_putname;
-	}
+	long rc;
+
+	filename = getname(name);
+	rc = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		return rc;
+	rc = compat_do_execve(filename, argv, envp, regs);
+	if (rc)
+		goto out;
 	current->thread.fp_regs.fpc=0;
 	asm volatile("sfpc %0,0" : : "d" (0));
-	result = regs->gprs[2];
-out_putname:
-        putname(filename);
+	rc = regs->gprs[2];
 out:
-	return result;
+	putname(filename);
+	return rc;
 }
 
 
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index 7cceb67ff8a..c07f9ca05ad 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -198,7 +198,8 @@ long sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
 			  compat_sigset_t __user *oset, size_t sigsetsize);
 long sys32_rt_sigpending(compat_sigset_t __user *set, size_t sigsetsize);
 long sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo);
-long sys32_execve(void);
+long sys32_execve(char __user *name, compat_uptr_t __user *argv,
+		  compat_uptr_t __user *envp);
 long sys32_init_module(void __user *umod, unsigned long len,
 		       const char __user *uargs);
 long sys32_delete_module(const char __user *name_user, unsigned int flags);
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 28f8440d2ec..8a6a7969c62 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1848,3 +1848,10 @@ sys_clone_wrapper:
 	llgtr	%r4,%r4			# int *
 	llgtr	%r5,%r5			# int *
 	jg	sys_clone		# branch to system call
+
+	.globl	sys32_execve_wrapper
+sys32_execve_wrapper:
+	llgtr	%r2,%r2			# char *
+	llgtr	%r3,%r3			# compat_uptr_t *
+	llgtr	%r4,%r4			# compat_uptr_t *
+	jg	sys32_execve		# branch to system call
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index 91fd78839c5..e1e5e767ab5 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -46,7 +46,8 @@ long sys_clone(unsigned long newsp, unsigned long clone_flags,
 	       int __user *parent_tidptr, int __user *child_tidptr);
 long sys_vfork(void);
 void execve_tail(void);
-long sys_execve(void);
+long sys_execve(char __user *name, char __user * __user *argv,
+		char __user * __user *envp);
 long sys_sigsuspend(int history0, int history1, old_sigset_t mask);
 long sys_sigaction(int sig, const struct old_sigaction __user *act,
 		   struct old_sigaction __user *oact);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 189d978f76d..59fe6ecc6ed 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -32,6 +32,7 @@
 #include <linux/elfcore.h>
 #include <linux/kernel_stat.h>
 #include <linux/syscalls.h>
+#include <linux/compat.h>
 #include <asm/compat.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -268,30 +269,25 @@ asmlinkage void execve_tail(void)
 /*
  * sys_execve() executes a new program.
  */
-SYSCALL_DEFINE0(execve)
+SYSCALL_DEFINE3(execve, char __user *, name, char __user * __user *, argv,
+		char __user * __user *, envp)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	char *filename;
-	unsigned long result;
-	int rc;
+	long rc;
 
-	filename = getname((char __user *) regs->orig_gpr2);
-	if (IS_ERR(filename)) {
-		result = PTR_ERR(filename);
+	filename = getname(name);
+	rc = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		return rc;
+	rc = do_execve(filename, argv, envp, regs);
+	if (rc)
 		goto out;
-	}
-	rc = do_execve(filename, (char __user * __user *) regs->gprs[3],
-		       (char __user * __user *) regs->gprs[4], regs);
-	if (rc) {
-		result = rc;
-		goto out_putname;
-	}
 	execve_tail();
-	result = regs->gprs[2];
-out_putname:
-	putname(filename);
+	rc = regs->gprs[2];
 out:
-	return result;
+	putname(filename);
+	return rc;
 }
 
 /*
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index ff79d58e0eb..062dd8f9237 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -19,7 +19,7 @@ SYSCALL(sys_restart_syscall,sys_restart_syscall,sys_restart_syscall)
 SYSCALL(sys_creat,sys_creat,sys32_creat_wrapper)
 SYSCALL(sys_link,sys_link,sys32_link_wrapper)
 SYSCALL(sys_unlink,sys_unlink,sys32_unlink_wrapper)		/* 10 */
-SYSCALL(sys_execve,sys_execve,sys32_execve)
+SYSCALL(sys_execve,sys_execve,sys32_execve_wrapper)
 SYSCALL(sys_chdir,sys_chdir,sys32_chdir_wrapper)
 SYSCALL(sys_time,sys_ni_syscall,sys32_time_wrapper)		/* old time syscall */
 SYSCALL(sys_mknod,sys_mknod,sys32_mknod_wrapper)
-- 
cgit v1.2.3


From 2e50195f58ec045bc4601ec94478d957974f4aa4 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:43 +0200
Subject: [S390] Get rid of init_module/delete_module compat functions.

These functions aren't needed. Might be a leftover of the pre
cond_syscall time.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/compat_linux.c   | 33 ---------------------------------
 arch/s390/kernel/compat_wrapper.S | 12 ++++++------
 arch/s390/kernel/syscalls.S       |  4 ++--
 3 files changed, 8 insertions(+), 41 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 05cf446e60b..5519cb74510 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -465,39 +465,6 @@ out:
 	return rc;
 }
 
-
-#ifdef CONFIG_MODULES
-
-asmlinkage long
-sys32_init_module(void __user *umod, unsigned long len,
-		const char __user *uargs)
-{
-	return sys_init_module(umod, len, uargs);
-}
-
-asmlinkage long
-sys32_delete_module(const char __user *name_user, unsigned int flags)
-{
-	return sys_delete_module(name_user, flags);
-}
-
-#else /* CONFIG_MODULES */
-
-asmlinkage long
-sys32_init_module(void __user *umod, unsigned long len,
-		const char __user *uargs)
-{
-	return -ENOSYS;
-}
-
-asmlinkage long
-sys32_delete_module(const char __user *name_user, unsigned int flags)
-{
-	return -ENOSYS;
-}
-
-#endif  /* CONFIG_MODULES */
-
 asmlinkage long sys32_pread64(unsigned int fd, char __user *ubuf,
 				size_t count, u32 poshi, u32 poslo)
 {
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 8a6a7969c62..682fb69dba2 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -568,18 +568,18 @@ compat_sys_sigprocmask_wrapper:
 	llgtr	%r4,%r4			# compat_old_sigset_t *
 	jg	compat_sys_sigprocmask		# branch to system call
 
-	.globl	sys32_init_module_wrapper
-sys32_init_module_wrapper:
+	.globl	sys_init_module_wrapper
+sys_init_module_wrapper:
 	llgtr	%r2,%r2			# void *
 	llgfr	%r3,%r3			# unsigned long
 	llgtr	%r4,%r4			# char *
-	jg	sys32_init_module	# branch to system call
+	jg	sys_init_module		# branch to system call
 
-	.globl	sys32_delete_module_wrapper
-sys32_delete_module_wrapper:
+	.globl	sys_delete_module_wrapper
+sys_delete_module_wrapper:
 	llgtr	%r2,%r2			# const char *
 	llgfr	%r3,%r3			# unsigned int
-	jg	sys32_delete_module	# branch to system call
+	jg	sys_delete_module	# branch to system call
 
 	.globl	sys32_quotactl_wrapper
 sys32_quotactl_wrapper:
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 062dd8f9237..30eca070d42 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -136,8 +136,8 @@ SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper)
 SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper)	/* 125 */
 SYSCALL(sys_sigprocmask,sys_sigprocmask,compat_sys_sigprocmask_wrapper)
 NI_SYSCALL							/* old "create module" */
-SYSCALL(sys_init_module,sys_init_module,sys32_init_module_wrapper)
-SYSCALL(sys_delete_module,sys_delete_module,sys32_delete_module_wrapper)
+SYSCALL(sys_init_module,sys_init_module,sys_init_module_wrapper)
+SYSCALL(sys_delete_module,sys_delete_module,sys_delete_module_wrapper)
 NI_SYSCALL							/* 130: old get_kernel_syms */
 SYSCALL(sys_quotactl,sys_quotactl,sys32_quotactl_wrapper)
 SYSCALL(sys_getpgid,sys_getpgid,sys32_getpgid_wrapper)
-- 
cgit v1.2.3


From 846955c8afe5ebca2f8841b042ca3342e08a092b Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:44 +0200
Subject: [S390] hibernation: fix guest page hinting related crash

On resume the system that loads the to be resumed image might have
unstable pages.
When the resume image is copied back and a write access happen to an
unstable page this causes an exception and the system crashes.

To fix this set all free pages to stable before copying the resumed
image data. Also after everything has been restored set all free
pages of the resumed system to unstable again.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/swsusp_asm64.S |  7 ++++++
 arch/s390/mm/page-states.c      | 52 ++++++++++++++++++++++++++++++++++-------
 2 files changed, 51 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index 7cd6b096f0d..9a86ccb91a8 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -102,6 +102,9 @@ swsusp_arch_resume:
 	aghi	%r15,-STACK_FRAME_OVERHEAD
 	stg	%r1,__SF_BACKCHAIN(%r15)
 
+	/* Make all free pages stable */
+	lghi	%r2,1
+	brasl	%r14,arch_set_page_states
 #ifdef CONFIG_SMP
 	/* Save boot cpu number */
 	brasl	%r14,smp_get_phys_cpu_id
@@ -178,6 +181,10 @@ swsusp_arch_resume:
 	/* Activate DAT */
 	stosm	__SF_EMPTY(%r15),0x04
 
+	/* Make all free pages unstable */
+	lghi	%r2,0
+	brasl	%r14,arch_set_page_states
+
 	/* Return 0 */
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index f92ec203ad9..098923ae458 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -50,28 +50,64 @@ void __init cmma_init(void)
 		cmma_flag = 0;
 }
 
-void arch_free_page(struct page *page, int order)
+static inline void set_page_unstable(struct page *page, int order)
 {
 	int i, rc;
 
-	if (!cmma_flag)
-		return;
 	for (i = 0; i < (1 << order); i++)
 		asm volatile(".insn rrf,0xb9ab0000,%0,%1,%2,0"
 			     : "=&d" (rc)
-			     : "a" ((page_to_pfn(page) + i) << PAGE_SHIFT),
+			     : "a" (page_to_phys(page + i)),
 			       "i" (ESSA_SET_UNUSED));
 }
 
-void arch_alloc_page(struct page *page, int order)
+void arch_free_page(struct page *page, int order)
 {
-	int i, rc;
-
 	if (!cmma_flag)
 		return;
+	set_page_unstable(page, order);
+}
+
+static inline void set_page_stable(struct page *page, int order)
+{
+	int i, rc;
+
 	for (i = 0; i < (1 << order); i++)
 		asm volatile(".insn rrf,0xb9ab0000,%0,%1,%2,0"
 			     : "=&d" (rc)
-			     : "a" ((page_to_pfn(page) + i) << PAGE_SHIFT),
+			     : "a" (page_to_phys(page + i)),
 			       "i" (ESSA_SET_STABLE));
 }
+
+void arch_alloc_page(struct page *page, int order)
+{
+	if (!cmma_flag)
+		return;
+	set_page_stable(page, order);
+}
+
+void arch_set_page_states(int make_stable)
+{
+	unsigned long flags, order, t;
+	struct list_head *l;
+	struct page *page;
+	struct zone *zone;
+
+	if (!cmma_flag)
+		return;
+	if (make_stable)
+		drain_local_pages(NULL);
+	for_each_populated_zone(zone) {
+		spin_lock_irqsave(&zone->lock, flags);
+		for_each_migratetype_order(order, t) {
+			list_for_each(l, &zone->free_area[order].free_list[t]) {
+				page = list_entry(l, struct page, lru);
+				if (make_stable)
+					set_page_stable(page, order);
+				else
+					set_page_unstable(page, order);
+			}
+		}
+		spin_unlock_irqrestore(&zone->lock, flags);
+	}
+}
-- 
cgit v1.2.3


From 2583d1efe04170cf166d43da6e4ed309e5601e84 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:45 +0200
Subject: [S390] hibernation: reset system after resume

Force system into defined state after resume.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/swsusp_asm64.S | 42 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index 9a86ccb91a8..fc056810a01 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -108,7 +108,8 @@ swsusp_arch_resume:
 #ifdef CONFIG_SMP
 	/* Save boot cpu number */
 	brasl	%r14,smp_get_phys_cpu_id
-	lgr	%r10,%r2
+	larl	%r1,saved_cpu_id
+	st	%r2,0(%r1)
 #endif
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
@@ -136,6 +137,29 @@ swsusp_arch_resume:
 2:
 	ptlb				/* flush tlb */
 
+	/* Reset System */
+	larl	%r1,restart_entry
+	larl	%r2,restart_psw
+	og	%r1,0(%r2)
+	stg	%r1,0(%r0)
+	larl	%r1,saved_pgm_check_psw
+	mvc	0(16,%r1),__LC_PGM_NEW_PSW(%r0)
+	larl	%r1,new_pgm_check_psw
+	epsw	%r2,%r3
+	stm	%r2,%r3,0(%r1)
+	mvc	__LC_PGM_NEW_PSW(16,%r0),0(%r1)
+	lghi	%r0,0
+	diag	%r0,%r0,0x308
+restart_entry:
+	lhi	%r1,1
+	sigp	%r1,%r0,0x12
+	sam64
+	larl	%r1,new_pgm_check_psw
+	lpswe	0(%r1)
+pgm_check_entry:
+	larl	%r1,saved_pgm_check_psw
+	mvc	__LC_PGM_NEW_PSW(16,%r0),0(%r1)
+
 	/* Restore registers */
 	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
 
@@ -171,7 +195,8 @@ swsusp_arch_resume:
 
 #ifdef CONFIG_SMP
 	/* Switch CPUs */
-	lgr	%r2,%r10		/* get cpu id */
+	larl	%r1,saved_cpu_id
+	llgf	%r2,0(%r1)
 	llgf	%r3,0x318(%r13)
 	brasl	%r14,smp_switch_boot_cpu_in_resume
 #endif
@@ -189,3 +214,16 @@ swsusp_arch_resume:
 	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
 	lghi	%r2,0
 	br	%r14
+
+	.section .data.nosave,"aw",@progbits
+	.align	8
+restart_psw:
+	.long	0x00080000,0x80000000
+new_pgm_check_psw:
+	.quad	0,pgm_check_entry
+saved_pgm_check_psw:
+	.quad	0,0
+#ifdef CONFIG_SMP
+saved_cpu_id:
+	.long	0
+#endif
-- 
cgit v1.2.3


From 87458ff4582953d6b3bf45edeac8582849552e69 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:46 +0200
Subject: [S390] Change kernel_page_present coding style.

Make the inline assembly look like all others.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/pgtable.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index c7021524707..c60bfb309ce 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -314,21 +314,18 @@ int s390_enable_sie(void)
 }
 EXPORT_SYMBOL_GPL(s390_enable_sie);
 
-#ifdef CONFIG_DEBUG_PAGEALLOC
-#ifdef CONFIG_HIBERNATION
+#if defined(CONFIG_DEBUG_PAGEALLOC) && defined(CONFIG_HIBERNATION)
 bool kernel_page_present(struct page *page)
 {
 	unsigned long addr;
 	int cc;
 
 	addr = page_to_phys(page);
-	asm("lra %1,0(%1)\n"
-	    "ipm %0\n"
-	    "srl %0,28"
-	    :"=d"(cc),"+a"(addr)::"cc");
+	asm volatile(
+		"	lra	%1,0(%1)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28"
+		: "=d" (cc), "+a" (addr) : : "cc");
 	return cc == 0;
 }
-
-#endif /* CONFIG_HIBERNATION */
-#endif /* CONFIG_DEBUG_PAGEALLOC */
-
+#endif /* CONFIG_HIBERNATION && CONFIG_DEBUG_PAGEALLOC */
-- 
cgit v1.2.3


From bdd42b28cde0453fb8c3d9b4e4868ca2d8124806 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:47 +0200
Subject: [S390] fix disabled_wait inline assembly clobber list

The disabled_wait inline assmembly also clobbers register r1, but it
is missing in the clobber list.
Fixes recursive Oops on panic.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index cf8eed3fa77..b4271545831 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -295,7 +295,7 @@ static inline void ATTRIB_NORET disabled_wait(unsigned long code)
 		"	oi	0x384(1),0x10\n"/* fake protection bit */
 		"	lpswe	0(%1)"
 		: "=m" (ctl_buf)
-		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0");
+		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0", "1");
 #endif /* __s390x__ */
 	while (1);
 }
-- 
cgit v1.2.3


From 07805ac81c81634623042408ffea6bbad3160bfa Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:48 +0200
Subject: [S390] ptrace: use common code for simple peek/poke operations

arch_ptrace on s390 implements PTRACE_(PEEK|POKE)(TEXT|DATA) instead of
using using ptrace_request in kernel/ptrace.c.
The only reason is the 31bit addressing mode, where we have to unmask the
highest bit.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ptrace.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index f3ddd7ac06c..a8738676b26 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -339,24 +339,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int copied, ret;
 
 	switch (request) {
-	case PTRACE_PEEKTEXT:
-	case PTRACE_PEEKDATA:
-		/* Remove high order bit from address (only for 31 bit). */
-		addr &= PSW_ADDR_INSN;
-		/* read word at location addr. */
-		return generic_ptrace_peekdata(child, addr, data);
-
 	case PTRACE_PEEKUSR:
 		/* read the word at location addr in the USER area. */
 		return peek_user(child, addr, data);
 
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEDATA:
-		/* Remove high order bit from address (only for 31 bit). */
-		addr &= PSW_ADDR_INSN;
-		/* write the word at location addr. */
-		return generic_ptrace_pokedata(child, addr, data);
-
 	case PTRACE_POKEUSR:
 		/* write the word at location addr in the USER area */
 		return poke_user(child, addr, data);
@@ -386,8 +372,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			copied += sizeof(unsigned long);
 		}
 		return 0;
+	default:
+		/* Removing high order bit from addr (only for 31 bit). */
+		addr &= PSW_ADDR_INSN;
+		return ptrace_request(child, request, addr, data);
 	}
-	return ptrace_request(child, request, addr, data);
 }
 
 #ifdef CONFIG_COMPAT
-- 
cgit v1.2.3


From 3fd26a7793fb21b88ccf1e238670b2a508fcf835 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:49 +0200
Subject: [S390] smp: introduce LC_ORDER and simplify lowcore handling

Removes a couple of simple code duplications. But before I have to do
this again, just simplify it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h |  6 ++++++
 arch/s390/kernel/smp.c          | 14 ++++----------
 2 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 6bc9426a6fb..8c5570366a0 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -189,6 +189,12 @@ union save_area {
 #define SAVE_AREA_BASE SAVE_AREA_BASE_S390X
 #endif
 
+#ifndef __s390x__
+#define LC_ORDER 0
+#else
+#define LC_ORDER 1
+#endif
+
 struct _lowcore
 {
 #ifndef __s390x__
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 56c16876b91..6f14734abe7 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -475,10 +475,8 @@ static int __cpuinit smp_alloc_lowcore(int cpu)
 {
 	unsigned long async_stack, panic_stack;
 	struct _lowcore *lowcore;
-	int lc_order;
 
-	lc_order = sizeof(long) == 8 ? 1 : 0;
-	lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, lc_order);
+	lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, LC_ORDER);
 	if (!lowcore)
 		return -ENOMEM;
 	async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER);
@@ -509,16 +507,14 @@ static int __cpuinit smp_alloc_lowcore(int cpu)
 out:
 	free_page(panic_stack);
 	free_pages(async_stack, ASYNC_ORDER);
-	free_pages((unsigned long) lowcore, lc_order);
+	free_pages((unsigned long) lowcore, LC_ORDER);
 	return -ENOMEM;
 }
 
 static void smp_free_lowcore(int cpu)
 {
 	struct _lowcore *lowcore;
-	int lc_order;
 
-	lc_order = sizeof(long) == 8 ? 1 : 0;
 	lowcore = lowcore_ptr[cpu];
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE)
@@ -528,7 +524,7 @@ static void smp_free_lowcore(int cpu)
 #endif
 	free_page(lowcore->panic_stack - PAGE_SIZE);
 	free_pages(lowcore->async_stack - ASYNC_SIZE, ASYNC_ORDER);
-	free_pages((unsigned long) lowcore, lc_order);
+	free_pages((unsigned long) lowcore, LC_ORDER);
 	lowcore_ptr[cpu] = NULL;
 }
 
@@ -664,7 +660,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	unsigned long async_stack, panic_stack;
 	struct _lowcore *lowcore;
 	unsigned int cpu;
-	int lc_order;
 
 	smp_detect_cpus();
 
@@ -674,8 +669,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	print_cpu_info();
 
 	/* Reallocate current lowcore, but keep its contents. */
-	lc_order = sizeof(long) == 8 ? 1 : 0;
-	lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, lc_order);
+	lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, LC_ORDER);
 	panic_stack = __get_free_page(GFP_KERNEL);
 	async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER);
 	BUG_ON(!lowcore || !panic_stack || !async_stack);
-- 
cgit v1.2.3


From 2573a575304c5ce4765fc88f9d09ed4dbf8d04bf Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:50 +0200
Subject: [S390] hibernate: make sure pfn_is_nosave handles lowcore pages

pfn_is_nosave doesn't return the correct value for the second lowcore
page if lowcore protection is enabled. Make sure it always returns
the correct value.

While at it simplify the whole thing.
NSS special handling is done by the tprot check like it already works
for DCSS as well. So remove the extra code for NSS.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h |  2 ++
 arch/s390/kernel/suspend.c      | 24 +++++++-----------------
 2 files changed, 9 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 8c5570366a0..a3ff9b01bf7 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -195,6 +195,8 @@ union save_area {
 #define LC_ORDER 1
 #endif
 
+#define LC_PAGES (1UL << LC_ORDER)
+
 struct _lowcore
 {
 #ifndef __s390x__
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
index 086bee970ca..cf9e5c6d552 100644
--- a/arch/s390/kernel/suspend.c
+++ b/arch/s390/kernel/suspend.c
@@ -6,36 +6,26 @@
  * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
  */
 
-#include <linux/suspend.h>
-#include <linux/reboot.h>
 #include <linux/pfn.h>
-#include <linux/mm.h>
-#include <asm/sections.h>
 #include <asm/system.h>
-#include <asm/ipl.h>
 
 /*
  * References to section boundaries
  */
 extern const void __nosave_begin, __nosave_end;
 
-/*
- *  check if given pfn is in the 'nosave' or in the read only NSS section
- */
 int pfn_is_nosave(unsigned long pfn)
 {
-	unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
-	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
-					>> PAGE_SHIFT;
-	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
-	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
+	unsigned long nosave_begin_pfn = PFN_DOWN(__pa(&__nosave_begin));
+	unsigned long nosave_end_pfn = PFN_DOWN(__pa(&__nosave_end));
 
+	/* Always save lowcore pages (LC protection might be enabled). */
+	if (pfn <= LC_PAGES)
+		return 0;
 	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
 		return 1;
-	if (pfn >= stext_pfn && pfn <= eshared_pfn) {
-		if (ipl_info.type == IPL_TYPE_NSS)
-			return 1;
-	} else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
+	/* Skip memory holes and read-only pages (NSS, DCSS, ...). */
+	if (tprot(PFN_PHYS(pfn)))
 		return 1;
 	return 0;
 }
-- 
cgit v1.2.3


From 1aaf179d043856d80bbb354f9feaf706b9cfbcd3 Mon Sep 17 00:00:00 2001
From: Michael Holzheu <michael.holzheu@linux.vnet.ibm.com>
Date: Tue, 22 Sep 2009 22:58:53 +0200
Subject: [S390] hibernate: Do real CPU swap at resume time

Currently, when the physical resume CPU is not equal to the physical suspend
CPU, we swap the CPUs logically, by modifying the logical/physical CPU mapping.
This has two major drawbacks: First the change is visible from user space (e.g.
CPU sysfs files) and second it is hard to ensure that nowhere in the kernel
the physical CPU ID is stored before suspend.
To fix this, we now really swap the physical CPUs, if the resume CPU is not
the pysical suspend CPU. We restart the suspend CPU and stop the resume CPU
using SIGP restart and SIGP stop. If the suspend CPU is no longer available,
we write a message and load a disabled wait PSW.

Signed-off-by: Michael Holzheu <michael.holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/lowcore.h |  1 +
 arch/s390/kernel/asm-offsets.c  |  7 +++-
 arch/s390/kernel/sclp.S         |  5 +--
 arch/s390/kernel/smp.c          | 36 ----------------
 arch/s390/kernel/swsusp_asm64.S | 91 ++++++++++++++++++++++++++++-------------
 5 files changed, 71 insertions(+), 69 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index a3ff9b01bf7..f2ef4b619ce 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -86,6 +86,7 @@
 #define __LC_PGM_OLD_PSW		0x0150
 #define __LC_MCK_OLD_PSW		0x0160
 #define __LC_IO_OLD_PSW			0x0170
+#define __LC_RESTART_PSW		0x01a0
 #define __LC_EXT_NEW_PSW		0x01b0
 #define __LC_SVC_NEW_PSW		0x01c0
 #define __LC_PGM_NEW_PSW		0x01d0
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index fa9905ce7d0..63e46433e81 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -7,6 +7,7 @@
 #include <linux/sched.h>
 #include <linux/kbuild.h>
 #include <asm/vdso.h>
+#include <asm/sigp.h>
 
 int main(void)
 {
@@ -59,6 +60,10 @@ int main(void)
 	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
 	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
 	DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
-
+	/* constants for SIGP */
+	DEFINE(__SIGP_STOP, sigp_stop);
+	DEFINE(__SIGP_RESTART, sigp_restart);
+	DEFINE(__SIGP_SENSE, sigp_sense);
+	DEFINE(__SIGP_INITIAL_CPU_RESET, sigp_initial_cpu_reset);
 	return 0;
 }
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index 20639dfe0c4..e27ca63076d 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -24,8 +24,6 @@ LC_EXT_INT_CODE		= 0x86			# addr of ext int code
 #   R3	= external interruption parameter if R2=0
 #
 
-.section ".init.text","ax"
-
 _sclp_wait_int:
 	stm	%r6,%r15,24(%r15)		# save registers
 	basr	%r13,0				# get base register
@@ -318,9 +316,8 @@ _sclp_print_early:
 	.long	_sclp_work_area
 .Lascebc:
 	.long	_ascebc
-.previous
 
-.section ".init.data","a"
+.section .data,"aw",@progbits
 	.balign 4096
 _sclp_work_area:
 	.fill	4096
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 6f14734abe7..b4b6396e6cf 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1041,42 +1041,6 @@ out:
 static SYSDEV_CLASS_ATTR(dispatching, 0644, dispatching_show,
 			 dispatching_store);
 
-/*
- * If the resume kernel runs on another cpu than the suspended kernel,
- * we have to switch the cpu IDs in the logical map.
- */
-void smp_switch_boot_cpu_in_resume(u32 resume_phys_cpu_id,
-				   struct _lowcore *suspend_lowcore)
-{
-	int cpu, suspend_cpu_id, resume_cpu_id;
-	u32 suspend_phys_cpu_id;
-
-	suspend_phys_cpu_id = __cpu_logical_map[suspend_lowcore->cpu_nr];
-	suspend_cpu_id = suspend_lowcore->cpu_nr;
-
-	for_each_present_cpu(cpu) {
-		if (__cpu_logical_map[cpu] == resume_phys_cpu_id) {
-			resume_cpu_id = cpu;
-			goto found;
-		}
-	}
-	panic("Could not find resume cpu in logical map.\n");
-
-found:
-	printk("Resume  cpu ID: %i/%i\n", resume_phys_cpu_id, resume_cpu_id);
-	printk("Suspend cpu ID: %i/%i\n", suspend_phys_cpu_id, suspend_cpu_id);
-
-	__cpu_logical_map[resume_cpu_id] = suspend_phys_cpu_id;
-	__cpu_logical_map[suspend_cpu_id] = resume_phys_cpu_id;
-
-	lowcore_ptr[suspend_cpu_id]->cpu_addr = resume_phys_cpu_id;
-}
-
-u32 smp_get_phys_cpu_id(void)
-{
-	return __cpu_logical_map[smp_processor_id()];
-}
-
 static int __init topology_init(void)
 {
 	int cpu;
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
index fc056810a01..fe927d0bc20 100644
--- a/arch/s390/kernel/swsusp_asm64.S
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -9,6 +9,7 @@
 
 #include <asm/page.h>
 #include <asm/ptrace.h>
+#include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 
 /*
@@ -41,6 +42,9 @@ swsusp_arch_suspend:
 	/* Get pointer to save area */
 	lghi	%r1,0x1000
 
+	/* Save CPU address */
+	stap	__LC_CPU_ADDRESS(%r1)
+
 	/* Store registers */
 	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
 	stfpc	0x31c(%r1)			/* store fpu control */
@@ -105,12 +109,7 @@ swsusp_arch_resume:
 	/* Make all free pages stable */
 	lghi	%r2,1
 	brasl	%r14,arch_set_page_states
-#ifdef CONFIG_SMP
-	/* Save boot cpu number */
-	brasl	%r14,smp_get_phys_cpu_id
-	larl	%r1,saved_cpu_id
-	st	%r2,0(%r1)
-#endif
+
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
@@ -139,12 +138,10 @@ swsusp_arch_resume:
 
 	/* Reset System */
 	larl	%r1,restart_entry
-	larl	%r2,restart_psw
+	larl	%r2,.Lrestart_diag308_psw
 	og	%r1,0(%r2)
 	stg	%r1,0(%r0)
-	larl	%r1,saved_pgm_check_psw
-	mvc	0(16,%r1),__LC_PGM_NEW_PSW(%r0)
-	larl	%r1,new_pgm_check_psw
+	larl	%r1,.Lnew_pgm_check_psw
 	epsw	%r2,%r3
 	stm	%r2,%r3,0(%r1)
 	mvc	__LC_PGM_NEW_PSW(16,%r0),0(%r1)
@@ -154,12 +151,54 @@ restart_entry:
 	lhi	%r1,1
 	sigp	%r1,%r0,0x12
 	sam64
-	larl	%r1,new_pgm_check_psw
+	larl	%r1,.Lnew_pgm_check_psw
 	lpswe	0(%r1)
 pgm_check_entry:
-	larl	%r1,saved_pgm_check_psw
-	mvc	__LC_PGM_NEW_PSW(16,%r0),0(%r1)
 
+	/* Switch to original suspend CPU */
+	larl	%r1,.Lresume_cpu		/* Resume CPU address: r2 */
+	stap	0(%r1)
+	llgh	%r2,0(%r1)
+	lghi	%r3,0x1000
+	llgh	%r1,__LC_CPU_ADDRESS(%r3)	/* Suspend CPU address: r1 */
+	cgr	%r1,%r2
+	je	restore_registers		/* r1 = r2 -> nothing to do */
+	larl	%r4,.Lrestart_suspend_psw	/* Set new restart PSW */
+	mvc	__LC_RESTART_PSW(16,%r0),0(%r4)
+3:
+	sigp	%r9,%r1,__SIGP_INITIAL_CPU_RESET
+	brc	8,4f	/* accepted */
+	brc	2,3b	/* busy, try again */
+
+	/* Suspend CPU not available -> panic */
+	larl	%r15,init_thread_union
+	ahi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER)
+	larl	%r2,.Lpanic_string
+	larl	%r3,_sclp_print_early
+	lghi	%r1,0
+	sam31
+	sigp	%r1,%r0,0x12
+	basr	%r14,%r3
+	larl	%r3,.Ldisabled_wait_31
+	lpsw	0(%r3)
+4:
+	/* Switch to suspend CPU */
+	sigp	%r9,%r1,__SIGP_RESTART	/* start suspend CPU */
+	brc	2,4b			/* busy, try again */
+5:
+	sigp	%r9,%r2,__SIGP_STOP	/* stop resume (current) CPU */
+6:	j	6b
+
+restart_suspend:
+	larl	%r1,.Lresume_cpu
+	llgh	%r2,0(%r1)
+7:
+	sigp	%r9,%r2,__SIGP_SENSE	/* Wait for resume CPU */
+	brc	2,7b			/* busy, try again */
+	tmll	%r9,0x40		/* Test if resume CPU is stopped */
+	jz	7b
+
+restore_registers:
 	/* Restore registers */
 	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
 
@@ -193,13 +232,6 @@ pgm_check_entry:
 	/* Pointer to save area */
 	lghi	%r13,0x1000
 
-#ifdef CONFIG_SMP
-	/* Switch CPUs */
-	larl	%r1,saved_cpu_id
-	llgf	%r2,0(%r1)
-	llgf	%r3,0x318(%r13)
-	brasl	%r14,smp_switch_boot_cpu_in_resume
-#endif
 	/* Restore prefix register */
 	spx	0x318(%r13)
 
@@ -217,13 +249,16 @@ pgm_check_entry:
 
 	.section .data.nosave,"aw",@progbits
 	.align	8
-restart_psw:
+.Ldisabled_wait_31:
+	.long  0x000a0000,0x00000000
+.Lpanic_string:
+	.asciz	"Resume not possible because suspend CPU is no longer available"
+	.align	8
+.Lrestart_diag308_psw:
 	.long	0x00080000,0x80000000
-new_pgm_check_psw:
+.Lrestart_suspend_psw:
+	.quad	0x0000000180000000,restart_suspend
+.Lnew_pgm_check_psw:
 	.quad	0,pgm_check_entry
-saved_pgm_check_psw:
-	.quad	0,0
-#ifdef CONFIG_SMP
-saved_cpu_id:
-	.long	0
-#endif
+.Lresume_cpu:
+	.byte	0,0
-- 
cgit v1.2.3


From ed87b27e00d2ca240f62f3903583a2f1541fb9ef Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Tue, 22 Sep 2009 22:58:54 +0200
Subject: [S390] Update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/defconfig | 37 +++++++++++++++++++++++++------------
 1 file changed, 25 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 4e91a2573cc..ab4464486b7 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Mon Jun 22 11:08:16 2009
+# Linux kernel version: 2.6.31
+# Tue Sep 22 17:43:13 2009
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -24,6 +24,7 @@ CONFIG_PGSTE=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_S390=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
 
@@ -48,11 +49,12 @@ CONFIG_AUDIT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -103,11 +105,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_STRIP_ASM_SYMS is not set
@@ -116,7 +119,6 @@ CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_HAVE_SYSCALL_WRAPPERS=y
@@ -176,6 +178,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_64BIT=y
+# CONFIG_KTIME_SCALAR is not set
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
 CONFIG_HOTPLUG_CPU=y
@@ -257,7 +260,6 @@ CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
-# CONFIG_PAGE_STATES is not set
 # CONFIG_APPLDATA_BASE is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_250 is not set
@@ -280,6 +282,7 @@ CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_RUNTIME is not set
 CONFIG_NET=y
 
 #
@@ -394,6 +397,7 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -487,6 +491,7 @@ CONFIG_CCW=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -501,6 +506,7 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_OSD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -594,8 +600,11 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
+# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=y
 CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
@@ -615,7 +624,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
@@ -678,6 +686,7 @@ CONFIG_SCLP_CONSOLE=y
 CONFIG_SCLP_VT220_TTY=y
 CONFIG_SCLP_VT220_CONSOLE=y
 CONFIG_SCLP_CPI=m
+CONFIG_SCLP_ASYNC=m
 CONFIG_S390_TAPE=m
 
 #
@@ -737,6 +746,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -798,7 +808,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_EXOFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -885,11 +894,13 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
@@ -979,11 +990,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_VMAC=m
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
-- 
cgit v1.2.3


From 58a587dc2abd436a6a8d0de729d9ed7e40ce0ac9 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Wed, 16 Sep 2009 23:37:32 +0000
Subject: at91sam9263: add at91_can device to generic device definition

This patch adds the device definition for the at91_can device to
the generic device definiton file for the at91sam9263.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-at91/at91sam9263_devices.c | 36 ++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h  |  6 ++++++
 2 files changed, 42 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f23324231..6026c2e0d5c 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -757,6 +757,42 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  CAN Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
+static struct resource can_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_CAN,
+		.end	= AT91SAM9263_BASE_CAN + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_CAN,
+		.end	= AT91SAM9263_ID_CAN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_can_device = {
+	.name		= "at91_can",
+	.id		= -1,
+	.resource	= can_resources,
+	.num_resources	= ARRAY_SIZE(can_resources),
+};
+
+void __init at91_add_device_can(struct at91_can_data *data)
+{
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* CANTX */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* CANRX */
+	at91sam9263_can_device.dev.platform_data = data;
+
+	platform_device_register(&at91sam9263_can_device);
+}
+#else
+void __init at91_add_device_can(struct at91_can_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  LCD Controller
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b8..134731cd9fd 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -179,6 +179,12 @@ extern void __init at91_add_device_isi(void);
  /* Touchscreen Controller */
 extern void __init at91_add_device_tsadcc(void);
 
+/* CAN */
+struct at91_can_data {
+	void (*transceiver_switch)(int on);
+};
+extern void __init at91_add_device_can(struct at91_can_data *data);
+
  /* LEDs */
 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-- 
cgit v1.2.3


From a7a1a05f9dc0308b1710c5a9545bb98ca250bb8d Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Wed, 16 Sep 2009 23:37:33 +0000
Subject: at91sam9263ek: activate at91 CAN controller

This patch activates the at91 CAN controller for the at91sam9263ek
development board.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-at91/board-sam9263ek.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f22..e6268b3cbe8 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -400,6 +400,23 @@ static struct gpio_led ek_pwm_led[] = {
 	}
 };
 
+/*
+ * CAN
+ */
+static void sam9263ek_transceiver_switch(int on)
+{
+	if (on) {
+		at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
+		at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
+	} else {
+		at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
+		at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
+	}
+}
+
+static struct at91_can_data ek_can_data = {
+	.transceiver_switch = sam9263ek_transceiver_switch,
+};
 
 static void __init ek_board_init(void)
 {
@@ -431,6 +448,8 @@ static void __init ek_board_init(void)
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+	/* CAN */
+	at91_add_device_can(&ek_can_data);
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-- 
cgit v1.2.3


From 18c1e2c80d92adca50ffc654617639a4aa35f29c Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 22 Sep 2009 19:57:51 -0700
Subject: x86: syscall_get_nr returns int

Make syscall_get_nr() return int, so we always sign-extend
the low 32 bits of orig_ax in checks.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/include/asm/syscall.h | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
index d82f39bb790..8d33bc5462d 100644
--- a/arch/x86/include/asm/syscall.h
+++ b/arch/x86/include/asm/syscall.h
@@ -1,7 +1,7 @@
 /*
  * Access to user system call parameters and results
  *
- * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
  *
  * This copyrighted material is made available to anyone wishing to use,
  * modify, copy, or redistribute it subject to the terms and conditions
@@ -16,13 +16,13 @@
 #include <linux/sched.h>
 #include <linux/err.h>
 
-static inline long syscall_get_nr(struct task_struct *task,
-				  struct pt_regs *regs)
+/*
+ * Only the low 32 bits of orig_ax are meaningful, so we return int.
+ * This importantly ignores the high bits on 64-bit, so comparisons
+ * sign-extend the low 32 bits.
+ */
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
-	/*
-	 * We always sign-extend a -1 value being set here,
-	 * so this is always either -1L or a syscall number.
-	 */
 	return regs->orig_ax;
 }
 
-- 
cgit v1.2.3


From b60e714dc3ef2a2541e3b262b8b742ba08a07fc0 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 22 Sep 2009 16:46:34 -0700
Subject: x86: ptrace: sysret path should reach syscall_trace_leave

If TIF_SYSCALL_TRACE or TIF_SINGLESTEP is set while inside a syscall,
the path back to user mode should get to syscall_trace_leave.

This does happen in most circumstances.  The exception to this is on
the 64-bit syscall fastpath, when no such flag was set on syscall
entry and nothing else has punted it off the fastpath for exit.  That
one exit fastpath fails to check for _TIF_WORK_SYSCALL_EXIT flags.
This makes the behavior inconsistent with what 32-bit tasks see and
what the native 32-bit kernel always does, and what 64-bit tasks see
in all cases where the iret path is taken anyhow.

Perhaps the only example that is affected is a ptrace stop inside
do_fork (for PTRACE_O_TRACE{CLONE,FORK,VFORK,VFORKDONE}).  Other
syscalls with internal ptrace stop points (execve) already take the
iret exit path for unrelated reasons.

Test cases for both PTRACE_SYSCALL and PTRACE_SINGLESTEP variants are at:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/syscall-from-clone.c?cvsroot=systemtap
http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/step-from-clone.c?cvsroot=systemtap

There was no special benefit to the sysret path's special path to call
do_notify_resume, because it always takes the iret exit path at the end.
So this change just makes the sysret exit path join the iret exit path
for all the signals and ptrace cases.  The fastpath still applies to
the plain syscall-audit and resched cases.

Signed-off-by: Roland McGrath <roland@redhat.com>
CC: Oleg Nesterov <oleg@redhat.com>
---
 arch/x86/kernel/entry_64.S | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 681c3fda739..b5c061f8f35 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -536,20 +536,13 @@ sysret_signal:
 	bt $TIF_SYSCALL_AUDIT,%edx
 	jc sysret_audit
 #endif
-	/* edx:	work flags (arg3) */
-	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
-	xorl %esi,%esi # oldset -> arg2
-	SAVE_REST
-	FIXUP_TOP_OF_STACK %r11
-	call do_notify_resume
-	RESTORE_TOP_OF_STACK %r11
-	RESTORE_REST
-	movl $_TIF_WORK_MASK,%edi
-	/* Use IRET because user could have changed frame. This
-	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp int_with_check
+	/*
+	 * We have a signal, or exit tracing or single-step.
+	 * These all wind up with the iret return path anyway,
+	 * so just join that path right now.
+	 */
+	FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
+	jmp int_check_syscall_exit_work
 
 badsys:
 	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
@@ -654,6 +647,7 @@ int_careful:
 int_very_careful:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
+int_check_syscall_exit_work:
 	SAVE_REST
 	/* Check for syscall exit trace */
 	testl $_TIF_WORK_SYSCALL_EXIT,%edx
-- 
cgit v1.2.3


From aa296ddf32da207b430f61b77a8e81c0663f07cf Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Sun, 20 Sep 2009 13:32:57 -0400
Subject: score: Make PAGE_SIZE available to assembly.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/score/include/asm/page.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/page.h b/arch/score/include/asm/page.h
index ee5821042fc..d92a5a2d36d 100644
--- a/arch/score/include/asm/page.h
+++ b/arch/score/include/asm/page.h
@@ -2,10 +2,11 @@
 #define _ASM_SCORE_PAGE_H
 
 #include <linux/pfn.h>
+#include <linux/const.h>
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #ifdef __KERNEL__
-- 
cgit v1.2.3


From 0dab1006896ef43f55b82b83ec2316f0179f681b Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Sun, 20 Sep 2009 13:32:58 -0400
Subject: score: Make THREAD_SIZE available to assembly files.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/score/include/asm/thread_info.h | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/score/include/asm/thread_info.h b/arch/score/include/asm/thread_info.h
index 3a112288552..55939992c27 100644
--- a/arch/score/include/asm/thread_info.h
+++ b/arch/score/include/asm/thread_info.h
@@ -7,6 +7,15 @@
 #define KU_USER	0x08
 #define KU_KERN	0x00
 
+#include <asm/page.h>
+#include <linux/const.h>
+
+/* thread information allocation */
+#define THREAD_SIZE_ORDER 	(1)
+#define THREAD_SIZE 		(PAGE_SIZE << THREAD_SIZE_ORDER)
+#define THREAD_MASK 		(THREAD_SIZE - _AC(1,UL))
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
 #ifndef __ASSEMBLY__
 
 #include <asm/processor.h>
@@ -62,12 +71,6 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("r28");
 #define current_thread_info()	__current_thread_info
 
-/* thread information allocation */
-#define THREAD_SIZE_ORDER 	(1)
-#define THREAD_SIZE 		(PAGE_SIZE << THREAD_SIZE_ORDER)
-#define THREAD_MASK 		(THREAD_SIZE - 1UL)
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
 #define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
 #define free_thread_info(info) kfree(info)
 
-- 
cgit v1.2.3


From eccfbf98f4d77bb5849dfb96f829f14d2b292551 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Wed, 23 Sep 2009 11:38:42 +0800
Subject: score: Cleanup linker script using new macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chen Liqin <liqin.chen@sunplusct.com>
---
 arch/score/kernel/vmlinux.lds.S | 77 +++++------------------------------------
 1 file changed, 9 insertions(+), 68 deletions(-)

(limited to 'arch')

diff --git a/arch/score/kernel/vmlinux.lds.S b/arch/score/kernel/vmlinux.lds.S
index f85569831d5..eebcbaa4e97 100644
--- a/arch/score/kernel/vmlinux.lds.S
+++ b/arch/score/kernel/vmlinux.lds.S
@@ -24,6 +24,8 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
 
 OUTPUT_ARCH(score)
 ENTRY(_stext)
@@ -49,21 +51,9 @@ SECTIONS
 	. = ALIGN(16);
 	RODATA
 
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
-	/* writeable */
-	.data ALIGN (4096): {
-		*(.data.init_task)
-
-		DATA_DATA
-		CONSTRUCTORS
-	}
+	RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
 
 	/* We want the small data sections together, so single-instruction offsets
 	   can access them all, and initialized data all before uninitialized, so
@@ -72,45 +62,14 @@ SECTIONS
 	.sdata : {
 		*(.sdata)
 	}
-
-	. = ALIGN(32);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
 	_edata =  .;			/* End of data section */
 
 	/* will be freed after init */
-	. = ALIGN(4096);		/* Init code and data */
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
 	__init_begin = .;
 
-	. = ALIGN(4096);
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 
 	/* .exit.text is discarded at runtime, not link time, to deal with
 	 * references from .rodata
@@ -121,28 +80,10 @@ SECTIONS
 	.exit.data : {
 		EXIT_DATA
 	}
-#if defined(CONFIG_BLK_DEV_INITRD)
-	.init.ramfs ALIGN(4096): {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-		. = ALIGN(4);
-		LONG(0);
-	}
-#endif
-	. = ALIGN(4096);
+	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	/* freed after init ends here */
 
-	__bss_start = .;	/* BSS */
-	.sbss  : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
+	BSS_SECTION(0, 0, 0)
 	_end = .;
 }
-- 
cgit v1.2.3


From 08ff18e299b1a1c91f4911fe9f35c4550218c73f Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 22 Sep 2009 19:58:58 -0700
Subject: x86: ptrace: do not sign-extend orig_ax on write

The high 32 bits of orig_ax will be ignored when it matters,
so don't fiddle them when setting it.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/kernel/ptrace.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 8d7d5c9c1be..52222fab99f 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -325,16 +325,6 @@ static int putreg(struct task_struct *child,
 		return set_flags(child, value);
 
 #ifdef CONFIG_X86_64
-	/*
-	 * Orig_ax is really just a flag with small positive and
-	 * negative values, so make sure to always sign-extend it
-	 * from 32 bits so that it works correctly regardless of
-	 * whether we come from a 32-bit environment or not.
-	 */
-	case offsetof(struct user_regs_struct, orig_ax):
-		value = (long) (s32) value;
-		break;
-
 	case offsetof(struct user_regs_struct,fs_base):
 		if (value >= TASK_SIZE_OF(child))
 			return -EIO;
@@ -1121,17 +1111,10 @@ static int putreg32(struct task_struct *child, unsigned regno, u32 value)
 	R32(esi, si);
 	R32(ebp, bp);
 	R32(eax, ax);
+	R32(orig_eax, orig_ax);
 	R32(eip, ip);
 	R32(esp, sp);
 
-	case offsetof(struct user32, regs.orig_eax):
-		/*
-		 * Sign-extend the value so that orig_eax = -1
-		 * causes (long)orig_ax < 0 tests to fire correctly.
-		 */
-		regs->orig_ax = (long) (s32) value;
-		break;
-
 	case offsetof(struct user32, regs.eflags):
 		return set_flags(child, value);
 
-- 
cgit v1.2.3


From 8cb3ed13935b9b523c2de7afc8f68473fe1d4531 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 22 Sep 2009 20:12:07 -0700
Subject: x86: ptrace: set TS_COMPAT when 32-bit ptrace sets orig_eax>=0

The 32-bit ptrace syscall on a 64-bit kernel (32-bit debugger on
32-bit task) behaves differently than a native 32-bit kernel.  When
setting a register state of orig_eax>=0 and eax=-ERESTART* when the
debugged task is NOT on its way out of a 32-bit syscall, the task will
fail to do the syscall restart logic that it should do.

Test case available at http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/erestartsys-trap.c?cvsroot=systemtap

This happens because the 32-bit ptrace syscall sets eax=0xffffffff
when it sets orig_eax>=0.  The resuming task will not sign-extend this
for the -ERESTART* check because TS_COMPAT is not set.  (So the task
thinks it is restarting after a 64-bit syscall, not a 32-bit one.)

The fix is to have 32-bit ptrace calls set TS_COMPAT when setting
orig_eax>=0.  This ensures that the 32-bit syscall restart logic
will apply when the child resumes.

Signed-off-by: Roland McGrath <roland@redhat.com>
---
 arch/x86/kernel/ptrace.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 52222fab99f..7b058a2dc66 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1111,10 +1111,22 @@ static int putreg32(struct task_struct *child, unsigned regno, u32 value)
 	R32(esi, si);
 	R32(ebp, bp);
 	R32(eax, ax);
-	R32(orig_eax, orig_ax);
 	R32(eip, ip);
 	R32(esp, sp);
 
+	case offsetof(struct user32, regs.orig_eax):
+		/*
+		 * A 32-bit debugger setting orig_eax means to restore
+		 * the state of the task restarting a 32-bit syscall.
+		 * Make sure we interpret the -ERESTART* codes correctly
+		 * in case the task is not actually still sitting at the
+		 * exit from a 32-bit syscall with TS_COMPAT still set.
+		 */
+		regs->orig_ax = value;
+		if (syscall_get_nr(child, regs) >= 0)
+			task_thread_info(child)->status |= TS_COMPAT;
+		break;
+
 	case offsetof(struct user32, regs.eflags):
 		return set_flags(child, value);
 
-- 
cgit v1.2.3


From 7d42896628202a551ad1107697cd215dc5fca099 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Wed, 23 Sep 2009 11:03:37 +0200
Subject: perf_event, x86: Fix 'perf sched record' crashing the machine

Chris Malley reported that 'perf sched record' sometimes
crashes his box with:

[  389.272175] BUG: unable to handle kernel paging request at ffffb300
[  389.272294] IP: [<c011b0bd>] default_send_IPI_self+0x1d/0x50
[  389.272366] *pde = 0073f067 *pte = 00000000
[  389.274708] Call Trace:
[  389.274752]  [<c010e3b4>] ?  set_perf_event_pending+0x14/0x20
[  389.274801]  [<c01b9751>] ?  perf_output_unlock+0x121/0x1a0
[  389.274848]  [<c01b981a>] ? perf_output_end+0x4a/0x70
[  389.274893]  [<c01ba690>] ?  __perf_event_overflow+0x240/0x2f0
[  389.274942]  [<c030963e>] ? atomic64_cmpxchg+0x1e/0x30
[  389.274988]  [<c01ba8f4>] ?  perf_swevent_ctx_event+0x1b4/0x1c0
[  389.275035]  [<c01ba773>] ?  perf_swevent_ctx_event+0x33/0x1c0
[  389.275081]  [<c01ba9a7>] ? do_perf_sw_event+0xa7/0x160
[  389.275127]  [<c01baae2>] ? perf_tp_event+0x82/0xa0
[  389.275174]  [<c012e9c6>] ?  ftrace_profile_sched_stat_runtime+0xe6/0x120
[  389.275224]  [<c012e8e0>] ?  ftrace_profile_sched_stat_runtime+0x0/0x120
[  389.275273]  [<c013c85a>] ? update_curr+0x18a/0x230
[  389.275318]  [<c013cdc5>] ?  put_prev_task_fair+0x155/0x160
[  389.275366]  [<c01618b5>] ? sched_clock_cpu+0xd5/0x110
[  389.275413]  [<c04e7525>] ? _spin_lock_irq+0x45/0x50
[  389.275458]  [<c04e424e>] ? schedule+0x20e/0xb10

The problem is that the box has no lapic enabled:

  [    0.042445] Local APIC not detected. Using dummy APIC emulation.

The below seems like the best fix. We disabled all lapic bits, except
the self-IPI-resend logic.

Reported-by: Chris Malley <mail@chrismalley.co.uk>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <7863dc4c0909221409v7893bfd3o4b590d5951a233ba@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index a3c7adb06b7..b5801c31184 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1790,6 +1790,9 @@ void smp_perf_pending_interrupt(struct pt_regs *regs)
 void set_perf_event_pending(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
+	if (!x86_pmu.apic || !x86_pmu_initialized())
+		return;
+
 	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
 #endif
 }
-- 
cgit v1.2.3


From 24924ece4482d5466ffcd0affedce63816c88e53 Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Wed, 23 Sep 2009 13:21:57 +0200
Subject: CRIS: Cleanup linker script using new linker script macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
---
 arch/cris/kernel/vmlinux.lds.S | 37 ++++++++-----------------------------
 1 file changed, 8 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 0d2adfc794d..971c2fa08f2 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -51,10 +51,7 @@ SECTIONS
 	_etext = . ;			/* End of text section. */
 	__etext = .;
 
-	. = ALIGN(4);			/* Exception table. */
-	__start___ex_table = .;
-	__ex_table : { *(__ex_table) }
-	__stop___ex_table = .;
+	EXCEPTION_TABLE(4)
 
 	RODATA
 
@@ -67,36 +64,24 @@ SECTIONS
 	__edata = . ;			/* End of data section. */
 	_edata = . ;
 
-	. = ALIGN(PAGE_SIZE);	/* init_task and stack, must be aligned. */
-	.data.init_task : { *(.data.init_task) }
+	INIT_TASK_DATA_SECTION(PAGE_SIZE)
 
 	. = ALIGN(PAGE_SIZE);		/* Init code and data. */
 	__init_begin = .;
-	.init.text : {
-		   _sinittext = .;
-		   INIT_TEXT
-		   _einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 	.init.data : { INIT_DATA }
-	. = ALIGN(16);
-	__setup_start = .;
-	.init.setup : { *(.init.setup) }
-	__setup_end = .;
+	.init.setup : { INIT_SETUP(16) }
 #ifdef CONFIG_ETRAX_ARCH_V32
 	__start___param = .;
 	__param : { *(__param) }
 	__stop___param = .;
 #endif
 	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
+		INIT_CALLS
 	}
 
 	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 	SECURITY_INIT
 
@@ -114,9 +99,7 @@ SECTIONS
 	PERCPU(PAGE_SIZE)
 
 	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
+		INIT_RAM_FS
 	}
 #endif
 
@@ -130,11 +113,7 @@ SECTIONS
 	__init_end = .;
 
 	__data_end = . ;		/* Move to _edata ? */
-	__bss_start = .;		/* BSS. */
-	.bss : {
-		*(COMMON)
-		*(.bss)
-	}
+	BSS_SECTION(0, 0, 0)
 
 	. =  ALIGN (0x20);
 	_end = .;
-- 
cgit v1.2.3


From cdae0ad5e8ea630017d4cad3923f763c4e6c3127 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Wed, 23 Sep 2009 22:26:42 -0600
Subject: lguest: move panic notifier registration to its expected place.

We used to defer it, so lockdep was happy.  We now init lockdep early
anyway, so just do it after that.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/lguest/boot.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 4cb7d5d18b8..7e59dc1d3fc 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1135,11 +1135,6 @@ static struct notifier_block paniced = {
 /* Setting up memory is fairly easy. */
 static __init char *lguest_memory_setup(void)
 {
-	/* We do this here and not earlier because lockcheck used to barf if we
-	 * did it before start_kernel().  I think we fixed that, so it'd be
-	 * nice to move it back to lguest_init.  Patch welcome... */
-	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
-
 	/*
 	 *The Linux bootloader header contains an "e820" memory map: the
 	 * Launcher populated the first entry with our memory limit.
@@ -1364,10 +1359,13 @@ __init void lguest_init(void)
 
 	/*
 	 * If we don't initialize the lock dependency checker now, it crashes
-	 * paravirt_disable_iospace.
+	 * atomic_notifier_chain_register, then paravirt_disable_iospace.
 	 */
 	lockdep_init();
 
+	/* Hook in our special panic hypercall code. */
+	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
+
 	/*
 	 * The IDE code spends about 3 seconds probing for disks: if we reserve
 	 * all the I/O ports up front it can't get them and so doesn't probe.
-- 
cgit v1.2.3


From df6c516900d48df3581b23d37d6516a22ec4f2ca Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Thu, 20 Aug 2009 15:39:48 -0500
Subject: USB: ehci,dbgp,early_printk: split ehci debug driver from
 early_printk.c

Move the dbgp early printk driver in advance of refactoring and adding
new code, so the changes to this code are tracked separately from the
move of the code.

The drivers/usb/early directory will be the location of the current
and future early usb code for driving usb devices prior initializing
the standard interrupt driven USB drivers.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kernel/early_printk.c | 715 -----------------------------------------
 1 file changed, 715 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index b11cab3c323..519a5e10be5 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -160,721 +160,6 @@ static struct console early_serial_console = {
 	.index =	-1,
 };
 
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-
-static struct ehci_caps __iomem *ehci_caps;
-static struct ehci_regs __iomem *ehci_regs;
-static struct ehci_dbg_port __iomem *ehci_debug;
-static unsigned int dbgp_endpoint_out;
-
-struct ehci_dev {
-	u32 bus;
-	u32 slot;
-	u32 func;
-};
-
-static struct ehci_dev ehci_dev;
-
-#define USB_DEBUG_DEVNUM 127
-
-#define DBGP_DATA_TOGGLE	0x8800
-
-static inline u32 dbgp_pid_update(u32 x, u32 tok)
-{
-	return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
-}
-
-static inline u32 dbgp_len_update(u32 x, u32 len)
-{
-	return (x & ~0x0f) | (len & 0x0f);
-}
-
-/*
- * USB Packet IDs (PIDs)
- */
-
-/* token */
-#define USB_PID_OUT		0xe1
-#define USB_PID_IN		0x69
-#define USB_PID_SOF		0xa5
-#define USB_PID_SETUP		0x2d
-/* handshake */
-#define USB_PID_ACK		0xd2
-#define USB_PID_NAK		0x5a
-#define USB_PID_STALL		0x1e
-#define USB_PID_NYET		0x96
-/* data */
-#define USB_PID_DATA0		0xc3
-#define USB_PID_DATA1		0x4b
-#define USB_PID_DATA2		0x87
-#define USB_PID_MDATA		0x0f
-/* Special */
-#define USB_PID_PREAMBLE	0x3c
-#define USB_PID_ERR		0x3c
-#define USB_PID_SPLIT		0x78
-#define USB_PID_PING		0xb4
-#define USB_PID_UNDEF_0		0xf0
-
-#define USB_PID_DATA_TOGGLE	0x88
-#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
-
-#define PCI_CAP_ID_EHCI_DEBUG	0xa
-
-#define HUB_ROOT_RESET_TIME	50	/* times are in msec */
-#define HUB_SHORT_RESET_TIME	10
-#define HUB_LONG_RESET_TIME	200
-#define HUB_RESET_TIMEOUT	500
-
-#define DBGP_MAX_PACKET		8
-
-static int dbgp_wait_until_complete(void)
-{
-	u32 ctrl;
-	int loop = 0x100000;
-
-	do {
-		ctrl = readl(&ehci_debug->control);
-		/* Stop when the transaction is finished */
-		if (ctrl & DBGP_DONE)
-			break;
-	} while (--loop > 0);
-
-	if (!loop)
-		return -1;
-
-	/*
-	 * Now that we have observed the completed transaction,
-	 * clear the done bit.
-	 */
-	writel(ctrl | DBGP_DONE, &ehci_debug->control);
-	return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
-}
-
-static void __init dbgp_mdelay(int ms)
-{
-	int i;
-
-	while (ms--) {
-		for (i = 0; i < 1000; i++)
-			outb(0x1, 0x80);
-	}
-}
-
-static void dbgp_breath(void)
-{
-	/* Sleep to give the debug port a chance to breathe */
-}
-
-static int dbgp_wait_until_done(unsigned ctrl)
-{
-	u32 pids, lpid;
-	int ret;
-	int loop = 3;
-
-retry:
-	writel(ctrl | DBGP_GO, &ehci_debug->control);
-	ret = dbgp_wait_until_complete();
-	pids = readl(&ehci_debug->pids);
-	lpid = DBGP_PID_GET(pids);
-
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * If the port is getting full or it has dropped data
-	 * start pacing ourselves, not necessary but it's friendly.
-	 */
-	if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
-		dbgp_breath();
-
-	/* If I get a NACK reissue the transmission */
-	if (lpid == USB_PID_NAK) {
-		if (--loop > 0)
-			goto retry;
-	}
-
-	return ret;
-}
-
-static void dbgp_set_data(const void *buf, int size)
-{
-	const unsigned char *bytes = buf;
-	u32 lo, hi;
-	int i;
-
-	lo = hi = 0;
-	for (i = 0; i < 4 && i < size; i++)
-		lo |= bytes[i] << (8*i);
-	for (; i < 8 && i < size; i++)
-		hi |= bytes[i] << (8*(i - 4));
-	writel(lo, &ehci_debug->data03);
-	writel(hi, &ehci_debug->data47);
-}
-
-static void __init dbgp_get_data(void *buf, int size)
-{
-	unsigned char *bytes = buf;
-	u32 lo, hi;
-	int i;
-
-	lo = readl(&ehci_debug->data03);
-	hi = readl(&ehci_debug->data47);
-	for (i = 0; i < 4 && i < size; i++)
-		bytes[i] = (lo >> (8*i)) & 0xff;
-	for (; i < 8 && i < size; i++)
-		bytes[i] = (hi >> (8*(i - 4))) & 0xff;
-}
-
-static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
-			 const char *bytes, int size)
-{
-	u32 pids, addr, ctrl;
-	int ret;
-
-	if (size > DBGP_MAX_PACKET)
-		return -1;
-
-	addr = DBGP_EPADDR(devnum, endpoint);
-
-	pids = readl(&ehci_debug->pids);
-	pids = dbgp_pid_update(pids, USB_PID_OUT);
-
-	ctrl = readl(&ehci_debug->control);
-	ctrl = dbgp_len_update(ctrl, size);
-	ctrl |= DBGP_OUT;
-	ctrl |= DBGP_GO;
-
-	dbgp_set_data(bytes, size);
-	writel(addr, &ehci_debug->address);
-	writel(pids, &ehci_debug->pids);
-
-	ret = dbgp_wait_until_done(ctrl);
-	if (ret < 0)
-		return ret;
-
-	return ret;
-}
-
-static int __init dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
-				 int size)
-{
-	u32 pids, addr, ctrl;
-	int ret;
-
-	if (size > DBGP_MAX_PACKET)
-		return -1;
-
-	addr = DBGP_EPADDR(devnum, endpoint);
-
-	pids = readl(&ehci_debug->pids);
-	pids = dbgp_pid_update(pids, USB_PID_IN);
-
-	ctrl = readl(&ehci_debug->control);
-	ctrl = dbgp_len_update(ctrl, size);
-	ctrl &= ~DBGP_OUT;
-	ctrl |= DBGP_GO;
-
-	writel(addr, &ehci_debug->address);
-	writel(pids, &ehci_debug->pids);
-	ret = dbgp_wait_until_done(ctrl);
-	if (ret < 0)
-		return ret;
-
-	if (size > ret)
-		size = ret;
-	dbgp_get_data(data, size);
-	return ret;
-}
-
-static int __init dbgp_control_msg(unsigned devnum, int requesttype,
-	int request, int value, int index, void *data, int size)
-{
-	u32 pids, addr, ctrl;
-	struct usb_ctrlrequest req;
-	int read;
-	int ret;
-
-	read = (requesttype & USB_DIR_IN) != 0;
-	if (size > (read ? DBGP_MAX_PACKET:0))
-		return -1;
-
-	/* Compute the control message */
-	req.bRequestType = requesttype;
-	req.bRequest = request;
-	req.wValue = cpu_to_le16(value);
-	req.wIndex = cpu_to_le16(index);
-	req.wLength = cpu_to_le16(size);
-
-	pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
-	addr = DBGP_EPADDR(devnum, 0);
-
-	ctrl = readl(&ehci_debug->control);
-	ctrl = dbgp_len_update(ctrl, sizeof(req));
-	ctrl |= DBGP_OUT;
-	ctrl |= DBGP_GO;
-
-	/* Send the setup message */
-	dbgp_set_data(&req, sizeof(req));
-	writel(addr, &ehci_debug->address);
-	writel(pids, &ehci_debug->pids);
-	ret = dbgp_wait_until_done(ctrl);
-	if (ret < 0)
-		return ret;
-
-	/* Read the result */
-	return dbgp_bulk_read(devnum, 0, data, size);
-}
-
-
-/* Find a PCI capability */
-static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
-{
-	u8 pos;
-	int bytes;
-
-	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
-		PCI_STATUS_CAP_LIST))
-		return 0;
-
-	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
-	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
-		u8 id;
-
-		pos &= ~3;
-		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
-		if (id == 0xff)
-			break;
-		if (id == cap)
-			return pos;
-
-		pos = read_pci_config_byte(num, slot, func,
-						 pos+PCI_CAP_LIST_NEXT);
-	}
-	return 0;
-}
-
-static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
-{
-	u32 class;
-
-	class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
-	if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
-		return 0;
-
-	return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
-}
-
-static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
-{
-	u32 bus, slot, func;
-
-	for (bus = 0; bus < 256; bus++) {
-		for (slot = 0; slot < 32; slot++) {
-			for (func = 0; func < 8; func++) {
-				unsigned cap;
-
-				cap = __find_dbgp(bus, slot, func);
-
-				if (!cap)
-					continue;
-				if (ehci_num-- != 0)
-					continue;
-				*rbus = bus;
-				*rslot = slot;
-				*rfunc = func;
-				return cap;
-			}
-		}
-	}
-	return 0;
-}
-
-static int __init ehci_reset_port(int port)
-{
-	u32 portsc;
-	u32 delay_time, delay;
-	int loop;
-
-	/* Reset the usb debug port */
-	portsc = readl(&ehci_regs->port_status[port - 1]);
-	portsc &= ~PORT_PE;
-	portsc |= PORT_RESET;
-	writel(portsc, &ehci_regs->port_status[port - 1]);
-
-	delay = HUB_ROOT_RESET_TIME;
-	for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
-	     delay_time += delay) {
-		dbgp_mdelay(delay);
-
-		portsc = readl(&ehci_regs->port_status[port - 1]);
-		if (portsc & PORT_RESET) {
-			/* force reset to complete */
-			loop = 2;
-			writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
-				&ehci_regs->port_status[port - 1]);
-			do {
-				portsc = readl(&ehci_regs->port_status[port-1]);
-			} while ((portsc & PORT_RESET) && (--loop > 0));
-		}
-
-		/* Device went away? */
-		if (!(portsc & PORT_CONNECT))
-			return -ENOTCONN;
-
-		/* bomb out completely if something weird happend */
-		if ((portsc & PORT_CSC))
-			return -EINVAL;
-
-		/* If we've finished resetting, then break out of the loop */
-		if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
-			return 0;
-	}
-	return -EBUSY;
-}
-
-static int __init ehci_wait_for_port(int port)
-{
-	u32 status;
-	int ret, reps;
-
-	for (reps = 0; reps < 3; reps++) {
-		dbgp_mdelay(100);
-		status = readl(&ehci_regs->status);
-		if (status & STS_PCD) {
-			ret = ehci_reset_port(port);
-			if (ret == 0)
-				return 0;
-		}
-	}
-	return -ENOTCONN;
-}
-
-#ifdef DBGP_DEBUG
-# define dbgp_printk early_printk
-#else
-static inline void dbgp_printk(const char *fmt, ...) { }
-#endif
-
-typedef void (*set_debug_port_t)(int port);
-
-static void __init default_set_debug_port(int port)
-{
-}
-
-static set_debug_port_t __initdata set_debug_port = default_set_debug_port;
-
-static void __init nvidia_set_debug_port(int port)
-{
-	u32 dword;
-	dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
-				 0x74);
-	dword &= ~(0x0f<<12);
-	dword |= ((port & 0x0f)<<12);
-	write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
-				 dword);
-	dbgp_printk("set debug port to %d\n", port);
-}
-
-static void __init detect_set_debug_port(void)
-{
-	u32 vendorid;
-
-	vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
-		 0x00);
-
-	if ((vendorid & 0xffff) == 0x10de) {
-		dbgp_printk("using nvidia set_debug_port\n");
-		set_debug_port = nvidia_set_debug_port;
-	}
-}
-
-static int __init ehci_setup(void)
-{
-	struct usb_debug_descriptor dbgp_desc;
-	u32 cmd, ctrl, status, portsc, hcs_params;
-	u32 debug_port, new_debug_port = 0, n_ports;
-	u32  devnum;
-	int ret, i;
-	int loop;
-	int port_map_tried;
-	int playtimes = 3;
-
-try_next_time:
-	port_map_tried = 0;
-
-try_next_port:
-
-	hcs_params = readl(&ehci_caps->hcs_params);
-	debug_port = HCS_DEBUG_PORT(hcs_params);
-	n_ports    = HCS_N_PORTS(hcs_params);
-
-	dbgp_printk("debug_port: %d\n", debug_port);
-	dbgp_printk("n_ports:    %d\n", n_ports);
-
-	for (i = 1; i <= n_ports; i++) {
-		portsc = readl(&ehci_regs->port_status[i-1]);
-		dbgp_printk("portstatus%d: %08x\n", i, portsc);
-	}
-
-	if (port_map_tried && (new_debug_port != debug_port)) {
-		if (--playtimes) {
-			set_debug_port(new_debug_port);
-			goto try_next_time;
-		}
-		return -1;
-	}
-
-	loop = 100000;
-	/* Reset the EHCI controller */
-	cmd = readl(&ehci_regs->command);
-	cmd |= CMD_RESET;
-	writel(cmd, &ehci_regs->command);
-	do {
-		cmd = readl(&ehci_regs->command);
-	} while ((cmd & CMD_RESET) && (--loop > 0));
-
-	if (!loop) {
-		dbgp_printk("can not reset ehci\n");
-		return -1;
-	}
-	dbgp_printk("ehci reset done\n");
-
-	/* Claim ownership, but do not enable yet */
-	ctrl = readl(&ehci_debug->control);
-	ctrl |= DBGP_OWNER;
-	ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
-	writel(ctrl, &ehci_debug->control);
-
-	/* Start the ehci running */
-	cmd = readl(&ehci_regs->command);
-	cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
-	cmd |= CMD_RUN;
-	writel(cmd, &ehci_regs->command);
-
-	/* Ensure everything is routed to the EHCI */
-	writel(FLAG_CF, &ehci_regs->configured_flag);
-
-	/* Wait until the controller is no longer halted */
-	loop = 10;
-	do {
-		status = readl(&ehci_regs->status);
-	} while ((status & STS_HALT) && (--loop > 0));
-
-	if (!loop) {
-		dbgp_printk("ehci can be started\n");
-		return -1;
-	}
-	dbgp_printk("ehci started\n");
-
-	/* Wait for a device to show up in the debug port */
-	ret = ehci_wait_for_port(debug_port);
-	if (ret < 0) {
-		dbgp_printk("No device found in debug port\n");
-		goto next_debug_port;
-	}
-	dbgp_printk("ehci wait for port done\n");
-
-	/* Enable the debug port */
-	ctrl = readl(&ehci_debug->control);
-	ctrl |= DBGP_CLAIM;
-	writel(ctrl, &ehci_debug->control);
-	ctrl = readl(&ehci_debug->control);
-	if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
-		dbgp_printk("No device in debug port\n");
-		writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
-		goto err;
-	}
-	dbgp_printk("debug ported enabled\n");
-
-	/* Completely transfer the debug device to the debug controller */
-	portsc = readl(&ehci_regs->port_status[debug_port - 1]);
-	portsc &= ~PORT_PE;
-	writel(portsc, &ehci_regs->port_status[debug_port - 1]);
-
-	dbgp_mdelay(100);
-
-	/* Find the debug device and make it device number 127 */
-	for (devnum = 0; devnum <= 127; devnum++) {
-		ret = dbgp_control_msg(devnum,
-			USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-			USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
-			&dbgp_desc, sizeof(dbgp_desc));
-		if (ret > 0)
-			break;
-	}
-	if (devnum > 127) {
-		dbgp_printk("Could not find attached debug device\n");
-		goto err;
-	}
-	if (ret < 0) {
-		dbgp_printk("Attached device is not a debug device\n");
-		goto err;
-	}
-	dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
-
-	/* Move the device to 127 if it isn't already there */
-	if (devnum != USB_DEBUG_DEVNUM) {
-		ret = dbgp_control_msg(devnum,
-			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-			USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
-		if (ret < 0) {
-			dbgp_printk("Could not move attached device to %d\n",
-				USB_DEBUG_DEVNUM);
-			goto err;
-		}
-		devnum = USB_DEBUG_DEVNUM;
-		dbgp_printk("debug device renamed to 127\n");
-	}
-
-	/* Enable the debug interface */
-	ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
-		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-		USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
-	if (ret < 0) {
-		dbgp_printk(" Could not enable the debug device\n");
-		goto err;
-	}
-	dbgp_printk("debug interface enabled\n");
-
-	/* Perform a small write to get the even/odd data state in sync
-	 */
-	ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
-	if (ret < 0) {
-		dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
-		goto err;
-	}
-	dbgp_printk("small write doned\n");
-
-	return 0;
-err:
-	/* Things didn't work so remove my claim */
-	ctrl = readl(&ehci_debug->control);
-	ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
-	writel(ctrl, &ehci_debug->control);
-	return -1;
-
-next_debug_port:
-	port_map_tried |= (1<<(debug_port - 1));
-	new_debug_port = ((debug_port-1+1)%n_ports) + 1;
-	if (port_map_tried != ((1<<n_ports) - 1)) {
-		set_debug_port(new_debug_port);
-		goto try_next_port;
-	}
-	if (--playtimes) {
-		set_debug_port(new_debug_port);
-		goto try_next_time;
-	}
-
-	return -1;
-}
-
-static int __init early_dbgp_init(char *s)
-{
-	u32 debug_port, bar, offset;
-	u32 bus, slot, func, cap;
-	void __iomem *ehci_bar;
-	u32 dbgp_num;
-	u32 bar_val;
-	char *e;
-	int ret;
-	u8 byte;
-
-	if (!early_pci_allowed())
-		return -1;
-
-	dbgp_num = 0;
-	if (*s)
-		dbgp_num = simple_strtoul(s, &e, 10);
-	dbgp_printk("dbgp_num: %d\n", dbgp_num);
-
-	cap = find_dbgp(dbgp_num, &bus, &slot, &func);
-	if (!cap)
-		return -1;
-
-	dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
-			 func);
-
-	debug_port = read_pci_config(bus, slot, func, cap);
-	bar = (debug_port >> 29) & 0x7;
-	bar = (bar * 4) + 0xc;
-	offset = (debug_port >> 16) & 0xfff;
-	dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
-	if (bar != PCI_BASE_ADDRESS_0) {
-		dbgp_printk("only debug ports on bar 1 handled.\n");
-
-		return -1;
-	}
-
-	bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
-	dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
-	if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
-		dbgp_printk("only simple 32bit mmio bars supported\n");
-
-		return -1;
-	}
-
-	/* double check if the mem space is enabled */
-	byte = read_pci_config_byte(bus, slot, func, 0x04);
-	if (!(byte & 0x2)) {
-		byte  |= 0x02;
-		write_pci_config_byte(bus, slot, func, 0x04, byte);
-		dbgp_printk("mmio for ehci enabled\n");
-	}
-
-	/*
-	 * FIXME I don't have the bar size so just guess PAGE_SIZE is more
-	 * than enough.  1K is the biggest I have seen.
-	 */
-	set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
-	ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
-	ehci_bar += bar_val & ~PAGE_MASK;
-	dbgp_printk("ehci_bar: %p\n", ehci_bar);
-
-	ehci_caps  = ehci_bar;
-	ehci_regs  = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase));
-	ehci_debug = ehci_bar + offset;
-	ehci_dev.bus = bus;
-	ehci_dev.slot = slot;
-	ehci_dev.func = func;
-
-	detect_set_debug_port();
-
-	ret = ehci_setup();
-	if (ret < 0) {
-		dbgp_printk("ehci_setup failed\n");
-		ehci_debug = NULL;
-
-		return -1;
-	}
-
-	return 0;
-}
-
-static void early_dbgp_write(struct console *con, const char *str, u32 n)
-{
-	int chunk, ret;
-
-	if (!ehci_debug)
-		return;
-	while (n > 0) {
-		chunk = n;
-		if (chunk > DBGP_MAX_PACKET)
-			chunk = DBGP_MAX_PACKET;
-		ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
-			dbgp_endpoint_out, str, chunk);
-		str += chunk;
-		n -= chunk;
-	}
-}
-
-static struct console early_dbgp_console = {
-	.name =		"earlydbg",
-	.write =	early_dbgp_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-#endif
-
 /* Direct interface for emergencies */
 static struct console *early_console = &early_vga_console;
 static int __initdata early_console_initialized;
-- 
cgit v1.2.3


From c9530948bc626c8b638015c0b32abb9615659ec6 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Thu, 20 Aug 2009 15:39:52 -0500
Subject: early_printk: Allow more than one early console

It is desirable to be able to use one early boot device to debug
another or to have multiple places you can see the early boot
diagnostics, such as the vga screen or serial device.

This patch changes the early_printk console device registration to
allow more than one early printk device to get registered via
register_console().

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 arch/x86/kernel/early_printk.c | 65 +++++++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 519a5e10be5..2acfd3fdc0c 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -176,10 +176,19 @@ asmlinkage void early_printk(const char *fmt, ...)
 	va_end(ap);
 }
 
+static inline void early_console_register(struct console *con, int keep_early)
+{
+	early_console = con;
+	if (keep_early)
+		early_console->flags &= ~CON_BOOT;
+	else
+		early_console->flags |= CON_BOOT;
+	register_console(early_console);
+}
 
 static int __init setup_early_printk(char *buf)
 {
-	int keep_early;
+	int keep;
 
 	if (!buf)
 		return 0;
@@ -188,42 +197,34 @@ static int __init setup_early_printk(char *buf)
 		return 0;
 	early_console_initialized = 1;
 
-	keep_early = (strstr(buf, "keep") != NULL);
-
-	if (!strncmp(buf, "serial", 6)) {
-		early_serial_init(buf + 6);
-		early_console = &early_serial_console;
-	} else if (!strncmp(buf, "ttyS", 4)) {
-		early_serial_init(buf);
-		early_console = &early_serial_console;
-	} else if (!strncmp(buf, "vga", 3)
-		&& boot_params.screen_info.orig_video_isVGA == 1) {
-		max_xpos = boot_params.screen_info.orig_video_cols;
-		max_ypos = boot_params.screen_info.orig_video_lines;
-		current_ypos = boot_params.screen_info.orig_y;
-		early_console = &early_vga_console;
+	keep = (strstr(buf, "keep") != NULL);
+
+	while (*buf != '\0') {
+		if (!strncmp(buf, "serial", 6)) {
+			early_serial_init(buf + 6);
+			early_console_register(&early_serial_console, keep);
+		}
+		if (!strncmp(buf, "ttyS", 4)) {
+			early_serial_init(buf + 4);
+			early_console_register(&early_serial_console, keep);
+		}
+		if (!strncmp(buf, "vga", 3) &&
+		    boot_params.screen_info.orig_video_isVGA == 1) {
+			max_xpos = boot_params.screen_info.orig_video_cols;
+			max_ypos = boot_params.screen_info.orig_video_lines;
+			current_ypos = boot_params.screen_info.orig_y;
+			early_console_register(&early_vga_console, keep);
+		}
 #ifdef CONFIG_EARLY_PRINTK_DBGP
-	} else if (!strncmp(buf, "dbgp", 4)) {
-		if (early_dbgp_init(buf+4) < 0)
-			return 0;
-		early_console = &early_dbgp_console;
-		/*
-		 * usb subsys will reset ehci controller, so don't keep
-		 * that early console
-		 */
-		keep_early = 0;
+		if (!strncmp(buf, "dbgp", 4) && !early_dbgp_init(buf + 4))
+			early_console_register(&early_dbgp_console, keep);
 #endif
 #ifdef CONFIG_HVC_XEN
-	} else if (!strncmp(buf, "xen", 3)) {
-		early_console = &xenboot_console;
+		if (!strncmp(buf, "xen", 3))
+			early_console_register(&xenboot_console, keep);
 #endif
+		buf++;
 	}
-
-	if (keep_early)
-		early_console->flags &= ~CON_BOOT;
-	else
-		early_console->flags |= CON_BOOT;
-	register_console(early_console);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 88e9d34c727883d7d6f02cf1475b3ec98b8480c7 Mon Sep 17 00:00:00 2001
From: James Morris <jmorris@namei.org>
Date: Tue, 22 Sep 2009 16:43:43 -0700
Subject: seq_file: constify seq_operations

Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/setup.c                  | 2 +-
 arch/powerpc/kernel/setup-common.c           | 2 +-
 arch/powerpc/platforms/pseries/hvCall_inst.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c
index 79890edfd67..3f24c298a3a 100644
--- a/arch/mn10300/kernel/setup.c
+++ b/arch/mn10300/kernel/setup.c
@@ -285,7 +285,7 @@ static void c_stop(struct seq_file *m, void *v)
 {
 }
 
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
 	.start	= c_start,
 	.next	= c_next,
 	.stop	= c_stop,
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 02fed27af7f..1d5570a1e45 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -328,7 +328,7 @@ static void c_stop(struct seq_file *m, void *v)
 {
 }
 
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
 	.start =c_start,
 	.next =	c_next,
 	.stop =	c_stop,
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index eae51ef9af2..3631a4f277e 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -71,7 +71,7 @@ static int hc_show(struct seq_file *m, void *p)
 	return 0;
 }
 
-static struct seq_operations hcall_inst_seq_ops = {
+static const struct seq_operations hcall_inst_seq_ops = {
         .start = hc_start,
         .next  = hc_next,
         .stop  = hc_stop,
-- 
cgit v1.2.3


From 8c87df457cb58fe75b9b893007917cf8095660a0 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Tue, 22 Sep 2009 16:43:52 -0700
Subject: BUILD_BUG_ON(): fix it and a couple of bogus uses of it

gcc permitting variable length arrays makes the current construct used for
BUILD_BUG_ON() useless, as that doesn't produce any diagnostic if the
controlling expression isn't really constant.  Instead, this patch makes
it so that a bit field gets used here.  Consequently, those uses where the
condition isn't really constant now also need fixing.

Note that in the gfp.h, kmemcheck.h, and virtio_config.h cases
MAYBE_BUILD_BUG_ON() really just serves documentation purposes - even if
the expression is compile time constant (__builtin_constant_p() yields
true), the array is still deemed of variable length by gcc, and hence the
whole expression doesn't have the intended effect.

[akpm@linux-foundation.org: make arch/sparc/include/asm/vio.h compile]
[akpm@linux-foundation.org: more nonsensical assertions in tpm.c..]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/sparc/include/asm/vio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
index d4de32f0f8a..6cdbf7e7351 100644
--- a/arch/sparc/include/asm/vio.h
+++ b/arch/sparc/include/asm/vio.h
@@ -258,7 +258,7 @@ static inline void *vio_dring_entry(struct vio_dring_state *dr,
 static inline u32 vio_dring_avail(struct vio_dring_state *dr,
 				  unsigned int ring_size)
 {
-	BUILD_BUG_ON(!is_power_of_2(ring_size));
+	MAYBE_BUILD_BUG_ON(!is_power_of_2(ring_size));
 
 	return (dr->pending -
 		((dr->prod - dr->cons) & (ring_size - 1)));
-- 
cgit v1.2.3


From e56770fbc48c1517f620f9f68e3f728e74d52bf5 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Tue, 22 Sep 2009 16:44:17 -0700
Subject: Blackfin: override text/data checking functions

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/include/asm/sections.h | 38 +++++++++++++++++++++++++++++++++---
 1 file changed, 35 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index e7fd0ecd73f..ae4dae1e370 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -1,9 +1,6 @@
 #ifndef _BLACKFIN_SECTIONS_H
 #define _BLACKFIN_SECTIONS_H
 
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
 /* only used when MTD_UCLINUX */
 extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
@@ -15,4 +12,39 @@ extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
 	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
 	_ebss_l2[], _l2_lma_start[];
 
+#include <asm/mem_map.h>
+
+/* Blackfin systems have discontinuous memory map and no virtualized memory */
+static inline int arch_is_kernel_text(unsigned long addr)
+{
+	return
+		(L1_CODE_LENGTH &&
+		 addr >= (unsigned long)_stext_l1 &&
+		 addr <  (unsigned long)_etext_l1)
+		||
+		(L2_LENGTH &&
+		 addr >= (unsigned long)_stext_l2 &&
+		 addr <  (unsigned long)_etext_l2);
+}
+#define arch_is_kernel_text(addr) arch_is_kernel_text(addr)
+
+static inline int arch_is_kernel_data(unsigned long addr)
+{
+	return
+		(L1_DATA_A_LENGTH &&
+		 addr >= (unsigned long)_sdata_l1 &&
+		 addr <  (unsigned long)_ebss_l1)
+		||
+		(L1_DATA_B_LENGTH &&
+		 addr >= (unsigned long)_sdata_b_l1 &&
+		 addr <  (unsigned long)_ebss_b_l1)
+		||
+		(L2_LENGTH &&
+		 addr >= (unsigned long)_sdata_l2 &&
+		 addr <  (unsigned long)_ebss_l2);
+}
+#define arch_is_kernel_data(addr) arch_is_kernel_data(addr)
+
+#include <asm-generic/sections.h>
+
 #endif
-- 
cgit v1.2.3


From 1887bde391a3216789c9a03ac111d5f6ebfb0c00 Mon Sep 17 00:00:00 2001
From: Denis Karpov <ext-denis.2.karpov@nokia.com>
Date: Tue, 22 Sep 2009 16:44:40 -0700
Subject: ARM: OMAP: mmc-twl4030: add context loss counter support

PM dynamic OFF state results in context loss.  That is, the host
controller has been powered off at some point, which means the registers
have been reset.  The driver must detect when this happens, and restore
the context.  This patch adds the means to detect context loss.

Note, the PM side is not yet implemented.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 15 +++++++++++++++
 arch/arm/plat-omap/include/mach/mmc.h |  3 +++
 2 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 3c04c2f1b23..30d028627c5 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -198,6 +198,18 @@ static int twl_mmc_resume(struct device *dev, int slot)
 #define twl_mmc_resume	NULL
 #endif
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+
+static int twl4030_mmc_get_context_loss(struct device *dev)
+{
+	/* FIXME: PM DPS not implemented yet */
+	return 0;
+}
+
+#else
+#define twl4030_mmc_get_context_loss NULL
+#endif
+
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
@@ -390,6 +402,9 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].switch_pin = -EINVAL;
 
+		mmc->get_context_loss_count =
+				twl4030_mmc_get_context_loss;
+
 		/* write protect normally uses an OMAP gpio */
 		if (gpio_is_valid(c->gpio_wp)) {
 			gpio_request(c->gpio_wp, "mmc_wp");
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 81d5b36534b..2f7cf31f9cd 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -59,6 +59,9 @@ struct omap_mmc_platform_data {
 	int (*suspend)(struct device *dev, int slot);
 	int (*resume)(struct device *dev, int slot);
 
+	/* Return context loss count due to PM states changing */
+	int (*get_context_loss_count)(struct device *dev);
+
 	u64 dma_mask;
 
 	struct omap_mmc_slot_data {
-- 
cgit v1.2.3


From 23d99bb923fc23aeb1086d60eb1c70602b4e2036 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 22 Sep 2009 16:44:48 -0700
Subject: omap_hsmmc: make use of new MMC_CAP_NONREMOVABLE host capability

Let the board specify that a card is nonremovable e.g. eMMC

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 3 +++
 arch/arm/mach-omap2/mmc-twl4030.h     | 1 +
 arch/arm/plat-omap/include/mach/mmc.h | 3 +++
 3 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 30d028627c5..56f07f26f75 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -415,6 +415,9 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		} else
 			mmc->slots[0].gpio_wp = -EINVAL;
 
+		if (c->nonremovable)
+			mmc->slots[0].nonremovable = 1;
+
 		/* NOTE:  MMC slots should have a Vcc regulator set up.
 		 * This may be from a TWL4030-family chip, another
 		 * controllable regulator, or a fixed supply.
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index 3807c45c9a6..75b0c645cb3 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -12,6 +12,7 @@ struct twl4030_hsmmc_info {
 	bool	transceiver;	/* MMC-2 option */
 	bool	ext_clock;	/* use external pin for input clock */
 	bool	cover_only;	/* No card detect - just cover switch */
+	bool	nonremovable;	/* Nonremovable e.g. eMMC */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 2f7cf31f9cd..bab486ce518 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -83,6 +83,9 @@ struct omap_mmc_platform_data {
 		/* use the internal clock */
 		unsigned internal_clock:1;
 
+		/* nonremovable e.g. eMMC */
+		unsigned nonremovable:1;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
-- 
cgit v1.2.3


From dd498effcfa6a196ba097adae3c5aa641115df88 Mon Sep 17 00:00:00 2001
From: Denis Karpov <ext-denis.2.karpov@nokia.com>
Date: Tue, 22 Sep 2009 16:44:49 -0700
Subject: omap_hsmmc: support for deeper power saving states

Support for multi-level dynamic power saving states in omap_hsmmc
(ENABLED->DISABLED->OFF).  In the "deepest" state (OFF) we switch off the
voltage regulators.

Signed-off-by: Denis Karpov <ext-denis.2.karpov@nokia.com>
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 3 +++
 arch/arm/mach-omap2/mmc-twl4030.h     | 1 +
 arch/arm/plat-omap/include/mach/mmc.h | 3 +++
 3 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 56f07f26f75..cb1cbd7934a 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -418,6 +418,9 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		if (c->nonremovable)
 			mmc->slots[0].nonremovable = 1;
 
+		if (c->power_saving)
+			mmc->slots[0].power_saving = 1;
+
 		/* NOTE:  MMC slots should have a Vcc regulator set up.
 		 * This may be from a TWL4030-family chip, another
 		 * controllable regulator, or a fixed supply.
diff --git a/arch/arm/mach-omap2/mmc-twl4030.h b/arch/arm/mach-omap2/mmc-twl4030.h
index 75b0c645cb3..a47e68563fb 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.h
+++ b/arch/arm/mach-omap2/mmc-twl4030.h
@@ -13,6 +13,7 @@ struct twl4030_hsmmc_info {
 	bool	ext_clock;	/* use external pin for input clock */
 	bool	cover_only;	/* No card detect - just cover switch */
 	bool	nonremovable;	/* Nonremovable e.g. eMMC */
+	bool	power_saving;	/* Try to sleep or power off when possible */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index bab486ce518..82f1e29f5e5 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -86,6 +86,9 @@ struct omap_mmc_platform_data {
 		/* nonremovable e.g. eMMC */
 		unsigned nonremovable:1;
 
+		/* Try to sleep or power off when possible */
+		unsigned power_saving:1;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
-- 
cgit v1.2.3


From 9b7c18e070d59ba0acfdb936fd613dfa1d2a4e7d Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 22 Sep 2009 16:44:50 -0700
Subject: ARM: OMAP: mmc-twl4030: add regulator sleep / wake function

Add the ability for the driver to put the card power regulators to sleep
and wake them up again.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/mmc-twl4030.c     | 57 +++++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mmc.h |  2 ++
 2 files changed, 59 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index cb1cbd7934a..c9c59a2db4e 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -340,6 +340,61 @@ static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int v
 	return ret;
 }
 
+static int twl_mmc1_set_sleep(struct device *dev, int slot, int sleep, int vdd,
+			      int cardsleep)
+{
+	struct twl_mmc_controller *c = &hsmmc[0];
+	int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+
+	return regulator_set_mode(c->vcc, mode);
+}
+
+static int twl_mmc23_set_sleep(struct device *dev, int slot, int sleep, int vdd,
+			       int cardsleep)
+{
+	struct twl_mmc_controller *c = NULL;
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i, err, mode;
+
+	for (i = 1; i < ARRAY_SIZE(hsmmc); i++) {
+		if (mmc == hsmmc[i].mmc) {
+			c = &hsmmc[i];
+			break;
+		}
+	}
+
+	if (c == NULL)
+		return -ENODEV;
+
+	/*
+	 * If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!c->vcc)
+		return 0;
+
+	mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
+
+	if (!c->vcc_aux)
+		return regulator_set_mode(c->vcc, mode);
+
+	if (cardsleep) {
+		/* VCC can be turned off if card is asleep */
+		struct regulator *vcc_aux = c->vcc_aux;
+
+		c->vcc_aux = NULL;
+		if (sleep)
+			err = twl_mmc23_set_power(dev, slot, 0, 0);
+		else
+			err = twl_mmc23_set_power(dev, slot, 1, vdd);
+		c->vcc_aux = vcc_aux;
+	} else
+		err = regulator_set_mode(c->vcc, mode);
+	if (err)
+		return err;
+	return regulator_set_mode(c->vcc_aux, mode);
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -433,6 +488,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		case 1:
 			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
+			mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
 			break;
 		case 2:
 			if (c->ext_clock)
@@ -443,6 +499,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		case 3:
 			/* off-chip level shifting, or none */
 			mmc->slots[0].set_power = twl_mmc23_set_power;
+			mmc->slots[0].set_sleep = twl_mmc23_set_sleep;
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 82f1e29f5e5..93902974275 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -95,6 +95,8 @@ struct omap_mmc_platform_data {
 		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
 		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
 		int (* get_ro)(struct device *dev, int slot);
+		int (*set_sleep)(struct device *dev, int slot, int sleep,
+				 int vdd, int cardsleep);
 
 		/* return MMC cover switch state, can be NULL if not supported.
 		 *
-- 
cgit v1.2.3


From 5e763d2968148efafc352748b0ed598b1a695dad Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Tue, 22 Sep 2009 16:45:05 -0700
Subject: ARM: OMAP: RX51: set MMC capabilities and power-saving flag

Specify MMC capabilities and set the power-saving flag for RX51.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Ian Molton <ian@mnementh.co.uk>
Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Cc: Denis Karpov <ext-denis.2.karpov@nokia.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Philip Langdale <philipl@overt.org>
Cc: "Madhusudhan" <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e70baa79901..e6e8290b782 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 
 #include <mach/mcspi.h>
 #include <mach/mux.h>
@@ -102,6 +103,7 @@ static struct twl4030_hsmmc_info mmc[] = {
 		.cover_only	= true,
 		.gpio_cd	= 160,
 		.gpio_wp	= -EINVAL,
+		.power_saving	= true,
 	},
 	{
 		.name		= "internal",
@@ -109,6 +111,8 @@ static struct twl4030_hsmmc_info mmc[] = {
 		.wires		= 8,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.nonremovable	= true,
+		.power_saving	= true,
 	},
 	{}	/* Terminator */
 };
-- 
cgit v1.2.3


From 50dfe70fe9e216cf356830194630f9a39e498d76 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Tue, 22 Sep 2009 16:45:14 -0700
Subject: powerpc: introduce and document sdhci,wp-inverted property for eSDHC

eSDHC block in MPC837x SOCs reports inverted write-protect state, soon
sdhci-of driver will look for sdhci,wp-inverted properties to decide
whether apply a specific quirk.

So, document the property and add it to device tree source files.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/boot/dts/mpc8377_mds.dts  | 1 +
 arch/powerpc/boot/dts/mpc8377_rdb.dts  | 1 +
 arch/powerpc/boot/dts/mpc8377_wlan.dts | 1 +
 arch/powerpc/boot/dts/mpc8378_mds.dts  | 1 +
 arch/powerpc/boot/dts/mpc8378_rdb.dts  | 1 +
 arch/powerpc/boot/dts/mpc8379_mds.dts  | 1 +
 arch/powerpc/boot/dts/mpc8379_rdb.dts  | 1 +
 7 files changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index f32c2811c6d..855782c5e5e 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -159,6 +159,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <0>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 28e022ac417..9e2264b1000 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -173,6 +173,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <111111111>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
index 3febc4e91b1..9a603695723 100644
--- a/arch/powerpc/boot/dts/mpc8377_wlan.dts
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -150,6 +150,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				clock-frequency = <133333333>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index f720ab9af30..f70cf600083 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -159,6 +159,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <0>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index a11ead8214b..4e6a1a407bb 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -173,6 +173,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <111111111>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 4fa221fd9bd..645ec51cc6e 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -157,6 +157,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <0>;
 			};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index e35dfba587c..72336d50452 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -171,6 +171,7 @@
 				reg = <0x2e000 0x1000>;
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
+				sdhci,wp-inverted;
 				/* Filled in by U-Boot */
 				clock-frequency = <111111111>;
 			};
-- 
cgit v1.2.3


From 864f38ebdcb1f7dc4138b7ccb801f16f1696eb8e Mon Sep 17 00:00:00 2001
From: Rob Emanuele <rob@emanuele.us>
Date: Tue, 22 Sep 2009 16:45:22 -0700
Subject: AT91: atmel-mci: Platform configuration to the the atmel-mci driver

Created a modified version of the at91sam9g20 evaluation kit platform
(board-sam9g20ek-2slot-mmc.c) and device support to make use of the
updated atmel-mci driver.

As the use of two slots modify GPIO pin allocation, we create another
board file.

This requires getting the most updated arch/arm/tools/mach-types from
http://www.arm.linux.org.uk/developer/machines/download.php to have the machine
type for the at91sam9g20ek-2slot-mmc board.

[nicolas.ferre@atmel.com: printk, slot_count modification in at91sam9260_devices.c file]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Rob Emanuele <rob@emanuele.us>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-at91/Kconfig                     |   7 +
 arch/arm/mach-at91/Makefile                    |   1 +
 arch/arm/mach-at91/at91sam9260_devices.c       |  96 +++++++++
 arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 277 +++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h        |   5 +
 5 files changed, 386 insertions(+)
 create mode 100644 arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c

(limited to 'arch')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a24d824c428..e35d54d43e7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -289,6 +289,13 @@ config MACH_NEOCORE926
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
+config MACH_AT91SAM9G20EK_2MMC
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  Rev A or B modified for 2 MMC Slots.
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a6ed015d82e..ada440aab0c 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 
 # AT91SAM9G45 board-specific support
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index ee4ea0e720c..07eb7b07e44 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -278,6 +278,102 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  MMC / SD Slot for Atmel MCI Driver
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct mci_platform_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_MCI,
+		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_MCI,
+		.end	= AT91SAM9260_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+	.name		= "atmel_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+{
+	unsigned int i;
+	unsigned int slot_count = 0;
+
+	if (!data)
+		return;
+
+	for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+		if (data->slot[i].bus_width) {
+			/* input/irq */
+			if (data->slot[i].detect_pin) {
+				at91_set_gpio_input(data->slot[i].detect_pin, 1);
+				at91_set_deglitch(data->slot[i].detect_pin, 1);
+			}
+			if (data->slot[i].wp_pin)
+				at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+			switch (i) {
+			case 0:
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA6, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA9, 1);
+					at91_set_A_periph(AT91_PIN_PA10, 1);
+					at91_set_A_periph(AT91_PIN_PA11, 1);
+				}
+				slot_count++;
+				break;
+			case 1:
+				/* CMD */
+				at91_set_B_periph(AT91_PIN_PA1, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_B_periph(AT91_PIN_PA0, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_B_periph(AT91_PIN_PA5, 1);
+					at91_set_B_periph(AT91_PIN_PA4, 1);
+					at91_set_B_periph(AT91_PIN_PA3, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+					"AT91: SD/MMC slot %d not available\n", i);
+				break;
+			}
+		}
+	}
+
+	if (slot_count) {
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA8, 0);
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9260_mmc_device);
+	}
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
+#endif
+
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
new file mode 100644
index 00000000000..a28e53faf71
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -0,0 +1,277 @@
+/*
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *  Copyright (C) 2009 Rob Emanuele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_ATMELMCI)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PC12,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name   = "Bootstrap",
+		.offset = 0,
+		.size   = 4 * SZ_1M,
+	},
+	{
+		.name	= "Partition 1",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 60 * SZ_1M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin and wp_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata ek_mmc_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+
+};
+#else
+static struct amci_platform_data __initdata ek_mmc_data = {
+};
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds5",
+		.gpio			= AT91_PIN_PB12,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PB13,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+	},
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	ek_add_device_nand();
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mci(0, &ek_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* PCK0 provides MCLK to the WM8731 */
+	at91_set_B_periph(AT91_PIN_PC1, 0);
+	/* SSC (for WM8731) */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+}
+
+MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
+	/* Maintainer: Rob Emanuele */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 13f27a4b882..583f38a38df 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
 
  /* USB Device */
@@ -64,6 +65,7 @@ struct at91_cf_data {
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
  /* MMC / SD */
+  /* at91_mci platform config */
 struct at91_mmc_data {
 	u8		det_pin;	/* card detect IRQ */
 	unsigned	slot_b:1;	/* uses Slot B */
@@ -73,6 +75,9 @@ struct at91_mmc_data {
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
+  /* atmel-mci platform config */
+extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
+
  /* Ethernet (EMAC & MACB) */
 struct at91_eth_data {
 	u32		phy_mask;
-- 
cgit v1.2.3


From 82cf818d54f0a415a031eabd0949a81946445198 Mon Sep 17 00:00:00 2001
From: kishore kadiyala <kishore.kadiyala@ti.com>
Date: Tue, 22 Sep 2009 16:45:25 -0700
Subject: omap4: mmc driver support on OMAP4

Add basic support for all 5 MMC controllers on OMAP4.

This patch doesn't include mmc-regulator support

Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Cc: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/devices.c          | 42 ++++++++++++++++++++++++++++++----
 arch/arm/plat-omap/include/mach/irqs.h |  2 ++
 arch/arm/plat-omap/include/mach/mmc.h  |  9 +++++++-
 3 files changed, 47 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index a2e915639b7..92009a4c6c8 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -397,7 +397,7 @@ static inline void omap_init_sha1_md5(void) { }
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef CONFIG_ARCH_OMAP3
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 
 #define MMCHS_SYSCONFIG			0x0010
 #define MMCHS_SYSCONFIG_SWRESET		(1 << 1)
@@ -424,8 +424,8 @@ static struct platform_device dummy_pdev = {
  **/
 static void __init omap_hsmmc_reset(void)
 {
-	u32 i, nr_controllers = cpu_is_omap34xx() ? OMAP34XX_NR_MMC :
-		OMAP24XX_NR_MMC;
+	u32 i, nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
+		(cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC);
 
 	for (i = 0; i < nr_controllers; i++) {
 		u32 v, base = 0;
@@ -442,8 +442,21 @@ static void __init omap_hsmmc_reset(void)
 		case 2:
 			base = OMAP3_MMC3_BASE;
 			break;
+		case 3:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC4_BASE;
+			break;
+		case 4:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC5_BASE;
+			break;
 		}
 
+		if (cpu_is_omap44xx())
+			base += OMAP4_MMC_REG_OFFSET;
+
 		dummy_pdev.id = i;
 		dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
 		iclk = clk_get(dev, "ick");
@@ -581,11 +594,23 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			irq = INT_24XX_MMC2_IRQ;
 			break;
 		case 2:
-			if (!cpu_is_omap34xx())
+			if (!cpu_is_omap44xx() && !cpu_is_omap34xx())
 				return;
 			base = OMAP3_MMC3_BASE;
 			irq = INT_34XX_MMC3_IRQ;
 			break;
+		case 3:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET;
+			irq = INT_44XX_MMC4_IRQ;
+			break;
+		case 4:
+			if (!cpu_is_omap44xx())
+				return;
+			base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
+			irq = INT_44XX_MMC5_IRQ;
+			break;
 		default:
 			continue;
 		}
@@ -593,8 +618,15 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		if (cpu_is_omap2420()) {
 			size = OMAP2420_MMC_SIZE;
 			name = "mmci-omap";
+		} else if (cpu_is_omap44xx()) {
+			if (i < 3) {
+				base += OMAP4_MMC_REG_OFFSET;
+				irq += IRQ_GIC_START;
+			}
+			size = OMAP4_HSMMC_SIZE;
+			name = "mmci-omap-hs";
 		} else {
-			size = HSMMC_SIZE;
+			size = OMAP3_HSMMC_SIZE;
 			name = "mmci-omap-hs";
 		}
 		omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index fb7cb772399..28a165058b6 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -503,6 +503,7 @@
 #define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
 #define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
 #define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_MMC5_IRQ	(59 + IRQ_GIC_START)
 #define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
 #define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
 #define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
@@ -511,6 +512,7 @@
 #define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
 #define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
 #define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+#define INT_44XX_MMC4_IRQ	(96 + IRQ_GIC_START)
 
 
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 93902974275..7229b959330 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -25,11 +25,18 @@
 
 #define OMAP24XX_NR_MMC		2
 #define OMAP34XX_NR_MMC		3
+#define OMAP44XX_NR_MMC		5
 #define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
-#define HSMMC_SIZE		0x200
+#define OMAP3_HSMMC_SIZE	0x200
+#define OMAP4_HSMMC_SIZE	0x1000
 #define OMAP2_MMC1_BASE		0x4809c000
 #define OMAP2_MMC2_BASE		0x480b4000
 #define OMAP3_MMC3_BASE		0x480ad000
+#define OMAP4_MMC4_BASE		0x480d1000
+#define OMAP4_MMC5_BASE		0x480d5000
+#define OMAP4_MMC_REG_OFFSET	0x100
+#define HSMMC5			(1 << 4)
+#define HSMMC4			(1 << 3)
 #define HSMMC3			(1 << 2)
 #define HSMMC2			(1 << 1)
 #define HSMMC1			(1 << 0)
-- 
cgit v1.2.3


From c30bb2a25fcfde6157e6154a32c14686fb0bedbe Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue, 22 Sep 2009 16:45:43 -0700
Subject: kcore: add kclist types

Presently, kclist_add() only eats start address and size as its arguments.
Considering to make kclist dynamically reconfigulable, it's necessary to
know which kclists are for System RAM and which are not.

This patch add kclist types as
  KCORE_RAM
  KCORE_VMALLOC
  KCORE_TEXT
  KCORE_OTHER

This "type" is used in a patch following this for detecting KCORE_RAM.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/mm/init.c       |  7 ++++---
 arch/mips/mm/init.c       |  7 ++++---
 arch/powerpc/mm/init_32.c |  4 ++--
 arch/powerpc/mm/init_64.c |  5 +++--
 arch/sh/mm/init.c         |  4 ++--
 arch/x86/mm/init_32.c     |  4 ++--
 arch/x86/mm/init_64.c     | 11 ++++++-----
 7 files changed, 23 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 1d286244a56..f6a3c21a282 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -639,9 +639,10 @@ mem_init (void)
 
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
 
-	kclist_add(&kcore_mem, __va(0), max_low_pfn * PAGE_SIZE);
-	kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START);
-	kclist_add(&kcore_kernel, _stext, _end - _stext);
+	kclist_add(&kcore_mem, __va(0), max_low_pfn * PAGE_SIZE, KCORE_RAM);
+	kclist_add(&kcore_vmem, (void *)VMALLOC_START,
+			VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
+	kclist_add(&kcore_kernel, _stext, _end - _stext, KCORE_TEXT);
 
 	for_each_online_pgdat(pgdat)
 		if (pgdat->bdata->node_bootmem_map)
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 1f4ee4797a6..f8661985bff 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -409,11 +409,12 @@ void __init mem_init(void)
 	if ((unsigned long) &_text > (unsigned long) CKSEG0)
 		/* The -4 is a hack so that user tools don't have to handle
 		   the overflow.  */
-		kclist_add(&kcore_kseg0, (void *) CKSEG0, 0x80000000 - 4);
+		kclist_add(&kcore_kseg0, (void *) CKSEG0,
+				0x80000000 - 4, KCORE_TEXT);
 #endif
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
 	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END-VMALLOC_START);
+		   VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
 	       "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 3ef5084b90c..e91add90ec5 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -268,11 +268,11 @@ static int __init setup_kcore(void)
 						size);
 		}
 
-		kclist_add(kcore_mem, __va(base), size);
+		kclist_add(kcore_mem, __va(base), size, KCORE_RAM);
 	}
 
 	kclist_add(&kcore_vmem, (void *)VMALLOC_START,
-		VMALLOC_END-VMALLOC_START);
+		VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 
 	return 0;
 }
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 31582329cd6..9ee563101b5 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -128,10 +128,11 @@ static int __init setup_kcore(void)
 		if (!kcore_mem)
 			panic("%s: kmalloc failed\n", __func__);
 
-		kclist_add(kcore_mem, __va(base), size);
+		kclist_add(kcore_mem, __va(base), size, KCORE_RAM);
 	}
 
-	kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START);
+	kclist_add(&kcore_vmem, (void *)VMALLOC_START,
+		VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 
 	return 0;
 }
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index fabb7c6f48d..ef56c9f9d7b 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -226,9 +226,9 @@ void __init mem_init(void)
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
 	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END - VMALLOC_START);
+		   VMALLOC_END - VMALLOC_START, KCORE_VMALLOC);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 	       "%dk data, %dk init)\n",
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index b49b4f67453..2cbc4011293 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -886,9 +886,9 @@ void __init mem_init(void)
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
 	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END-VMALLOC_START);
+		   VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 			"%dk reserved, %dk data, %dk init, %ldk highmem)\n",
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 810bd31e7f5..c05810b614f 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -677,13 +677,14 @@ void __init mem_init(void)
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
 	/* Register memory areas for /proc/kcore */
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT);
+	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
 	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END-VMALLOC_START);
-	kclist_add(&kcore_kernel, &_stext, _end - _stext);
-	kclist_add(&kcore_modules, (void *)MODULES_VADDR, MODULES_LEN);
+		   VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
+	kclist_add(&kcore_kernel, &_stext, _end - _stext, KCORE_TEXT);
+	kclist_add(&kcore_modules, (void *)MODULES_VADDR, MODULES_LEN,
+			KCORE_OTHER);
 	kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START,
-				 VSYSCALL_END - VSYSCALL_START);
+			 VSYSCALL_END - VSYSCALL_START, KCORE_OTHER);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
 			 "%ldk absent, %ldk reserved, %ldk data, %ldk init)\n",
-- 
cgit v1.2.3


From a0614da88b67ffa3dbcc0d40b817e682c7c4a0ee Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue, 22 Sep 2009 16:45:44 -0700
Subject: kcore: register vmalloc area in generic way

For /proc/kcore, vmalloc areas are registered per arch.  But, all of them
registers same range of [VMALLOC_START...VMALLOC_END) This patch unifies
them.  By this.  archs which have no kclist_add() hooks can see vmalloc
area correctly.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/mm/init.c       | 4 +---
 arch/mips/mm/init.c       | 4 +---
 arch/powerpc/mm/init_32.c | 4 ----
 arch/powerpc/mm/init_64.c | 4 ----
 arch/sh/mm/init.c         | 4 +---
 arch/x86/mm/init_32.c     | 4 +---
 arch/x86/mm/init_64.c     | 4 +---
 7 files changed, 5 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index f6a3c21a282..286b98aa854 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -617,7 +617,7 @@ mem_init (void)
 	long reserved_pages, codesize, datasize, initsize;
 	pg_data_t *pgdat;
 	int i;
-	static struct kcore_list kcore_mem, kcore_vmem, kcore_kernel;
+	static struct kcore_list kcore_mem, kcore_kernel;
 
 	BUG_ON(PTRS_PER_PGD * sizeof(pgd_t) != PAGE_SIZE);
 	BUG_ON(PTRS_PER_PMD * sizeof(pmd_t) != PAGE_SIZE);
@@ -640,8 +640,6 @@ mem_init (void)
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
 
 	kclist_add(&kcore_mem, __va(0), max_low_pfn * PAGE_SIZE, KCORE_RAM);
-	kclist_add(&kcore_vmem, (void *)VMALLOC_START,
-			VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 	kclist_add(&kcore_kernel, _stext, _end - _stext, KCORE_TEXT);
 
 	for_each_online_pgdat(pgdat)
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index f8661985bff..4a83da499e2 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -352,7 +352,7 @@ void __init paging_init(void)
 	free_area_init_nodes(max_zone_pfns);
 }
 
-static struct kcore_list kcore_mem, kcore_vmalloc;
+static struct kcore_list kcore_mem;
 #ifdef CONFIG_64BIT
 static struct kcore_list kcore_kseg0;
 #endif
@@ -413,8 +413,6 @@ void __init mem_init(void)
 				0x80000000 - 4, KCORE_TEXT);
 #endif
 	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
-	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
 	       "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index e91add90ec5..38a450d16b2 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -243,7 +243,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 #ifdef CONFIG_PROC_KCORE
-static struct kcore_list kcore_vmem;
 
 static int __init setup_kcore(void)
 {
@@ -271,9 +270,6 @@ static int __init setup_kcore(void)
 		kclist_add(kcore_mem, __va(base), size, KCORE_RAM);
 	}
 
-	kclist_add(&kcore_vmem, (void *)VMALLOC_START,
-		VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
-
 	return 0;
 }
 module_init(setup_kcore);
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 9ee563101b5..87ef492a1a5 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -110,7 +110,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #endif
 
 #ifdef CONFIG_PROC_KCORE
-static struct kcore_list kcore_vmem;
 
 static int __init setup_kcore(void)
 {
@@ -131,9 +130,6 @@ static int __init setup_kcore(void)
 		kclist_add(kcore_mem, __va(base), size, KCORE_RAM);
 	}
 
-	kclist_add(&kcore_vmem, (void *)VMALLOC_START,
-		VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
-
 	return 0;
 }
 module_init(setup_kcore);
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ef56c9f9d7b..bf8bd026db5 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -186,7 +186,7 @@ void __init paging_init(void)
 	set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
 }
 
-static struct kcore_list kcore_mem, kcore_vmalloc;
+static struct kcore_list kcore_mem;
 
 void __init mem_init(void)
 {
@@ -227,8 +227,6 @@ void __init mem_init(void)
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
 	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
-	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END - VMALLOC_START, KCORE_VMALLOC);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 	       "%dk data, %dk init)\n",
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 2cbc4011293..7108678ca9b 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -857,7 +857,7 @@ static void __init test_wp_bit(void)
 	}
 }
 
-static struct kcore_list kcore_mem, kcore_vmalloc;
+static struct kcore_list kcore_mem;
 
 void __init mem_init(void)
 {
@@ -887,8 +887,6 @@ void __init mem_init(void)
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
 	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
-	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 			"%dk reserved, %dk data, %dk init, %ldk highmem)\n",
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c05810b614f..da2cae7427a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -647,7 +647,7 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel,
+static struct kcore_list kcore_mem, kcore_kernel,
 			 kcore_modules, kcore_vsyscall;
 
 void __init mem_init(void)
@@ -678,8 +678,6 @@ void __init mem_init(void)
 
 	/* Register memory areas for /proc/kcore */
 	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
-	kclist_add(&kcore_vmalloc, (void *)VMALLOC_START,
-		   VMALLOC_END-VMALLOC_START, KCORE_VMALLOC);
 	kclist_add(&kcore_kernel, &_stext, _end - _stext, KCORE_TEXT);
 	kclist_add(&kcore_modules, (void *)MODULES_VADDR, MODULES_LEN,
 			KCORE_OTHER);
-- 
cgit v1.2.3


From 9492587cf35d370db33ef4b38375dfb35a105b61 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue, 22 Sep 2009 16:45:45 -0700
Subject: kcore: register text area in generic way

Some 64bit arch has special segment for mapping kernel text.  It should be
entried to /proc/kcore in addtion to direct-linear-map, vmalloc area.
This patch unifies KCORE_TEXT entry scattered under x86 and ia64.

I'm not familiar with other archs (mips has its own even after this patch)
but range of [_stext ..._end) is a valid area of text and it's not in
direct-map area, defining CONFIG_ARCH_PROC_KCORE_TEXT is only a necessary
thing to do.

Note: I left mips as it is now.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/Kconfig     | 4 ++++
 arch/ia64/mm/init.c   | 3 +--
 arch/x86/Kconfig      | 4 ++++
 arch/x86/mm/init_64.c | 4 +---
 4 files changed, 10 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 011a1cdf0eb..6851e52ed5a 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -500,6 +500,10 @@ config HAVE_ARCH_NODEDATA_EXTENSION
 	def_bool y
 	depends on NUMA
 
+config ARCH_PROC_KCORE_TEXT
+	def_bool y
+	depends on PROC_KCORE
+
 config IA32_SUPPORT
 	bool "Support for Linux/x86 binaries"
 	help
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 286b98aa854..3f95ea1d6fb 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -617,7 +617,7 @@ mem_init (void)
 	long reserved_pages, codesize, datasize, initsize;
 	pg_data_t *pgdat;
 	int i;
-	static struct kcore_list kcore_mem, kcore_kernel;
+	static struct kcore_list kcore_mem;
 
 	BUG_ON(PTRS_PER_PGD * sizeof(pgd_t) != PAGE_SIZE);
 	BUG_ON(PTRS_PER_PMD * sizeof(pmd_t) != PAGE_SIZE);
@@ -640,7 +640,6 @@ mem_init (void)
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
 
 	kclist_add(&kcore_mem, __va(0), max_low_pfn * PAGE_SIZE, KCORE_RAM);
-	kclist_add(&kcore_kernel, _stext, _end - _stext, KCORE_TEXT);
 
 	for_each_online_pgdat(pgdat)
 		if (pgdat->bdata->node_bootmem_map)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e4ff5d1280c..7c7a54bed4a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1204,6 +1204,10 @@ config ARCH_DISCONTIGMEM_DEFAULT
 	def_bool y
 	depends on NUMA && X86_32
 
+config ARCH_PROC_KCORE_TEXT
+	def_bool y
+	depends on X86_64 && PROC_KCORE
+
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
 	depends on X86_64
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index da2cae7427a..a0c2efb10cb 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -647,8 +647,7 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-static struct kcore_list kcore_mem, kcore_kernel,
-			 kcore_modules, kcore_vsyscall;
+static struct kcore_list kcore_mem, kcore_modules, kcore_vsyscall;
 
 void __init mem_init(void)
 {
@@ -678,7 +677,6 @@ void __init mem_init(void)
 
 	/* Register memory areas for /proc/kcore */
 	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
-	kclist_add(&kcore_kernel, &_stext, _end - _stext, KCORE_TEXT);
 	kclist_add(&kcore_modules, (void *)MODULES_VADDR, MODULES_LEN,
 			KCORE_OTHER);
 	kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START,
-- 
cgit v1.2.3


From 908eedc6168bd92e89f90d89fa389065a36358fa Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue, 22 Sep 2009 16:45:46 -0700
Subject: walk system ram range
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Originally, walk_memory_resource() was introduced to traverse all memory
of "System RAM" for detecting memory hotplug/unplug range.  For doing so,
flags of IORESOUCE_MEM|IORESOURCE_BUSY was used and this was enough for
memory hotplug.

But for using other purpose, /proc/kcore, this may includes some firmware
area marked as IORESOURCE_BUSY | IORESOUCE_MEM.  This patch makes the
check strict to find out busy "System RAM".

Note: PPC64 keeps their own walk_memory_resouce(), which walk through
ppc64's lmb informaton.  Because old kclist_add() is called per lmb, this
patch makes no difference in behavior, finally.

And this patch removes CONFIG_MEMORY_HOTPLUG check from this function.
Because pfn_valid() just show "there is memmap or not* and cannot be used
for "there is physical memory or not", this function is useful in generic
to scan physical memory range.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/mm/mem.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 0e5c59b995e..59736317bf0 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -143,8 +143,8 @@ int arch_add_memory(int nid, u64 start, u64 size)
  * memory regions, find holes and callback for contiguous regions.
  */
 int
-walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
-			int (*func)(unsigned long, unsigned long, void *))
+walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
+		void *arg, int (*func)(unsigned long, unsigned long, void *))
 {
 	struct lmb_property res;
 	unsigned long pfn, len;
@@ -166,7 +166,7 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 	}
 	return ret;
 }
-EXPORT_SYMBOL_GPL(walk_memory_resource);
+EXPORT_SYMBOL_GPL(walk_system_ram_range);
 
 /*
  * Initialize the bootmem system and give it all the memory we
-- 
cgit v1.2.3


From 3089aa1b0c07fb7c48f9829c619f50198307789d Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue, 22 Sep 2009 16:45:48 -0700
Subject: kcore: use registerd physmem information

For /proc/kcore, each arch registers its memory range by kclist_add().
In usual,

	- range of physical memory
	- range of vmalloc area
	- text, etc...

are registered but "range of physical memory" has some troubles.  It
doesn't updated at memory hotplug and it tend to include unnecessary
memory holes.  Now, /proc/iomem (kernel/resource.c) includes required
physical memory range information and it's properly updated at memory
hotplug.  Then, it's good to avoid using its own code(duplicating
information) and to rebuild kclist for physical memory based on
/proc/iomem.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/mm/init.c       |  3 ---
 arch/mips/mm/init.c       |  2 --
 arch/powerpc/mm/init_32.c | 32 --------------------------------
 arch/powerpc/mm/init_64.c | 26 --------------------------
 arch/sh/mm/init.c         |  4 ----
 arch/x86/mm/init_32.c     |  4 ----
 arch/x86/mm/init_64.c     |  3 +--
 7 files changed, 1 insertion(+), 73 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 3f95ea1d6fb..1857766a63c 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -617,7 +617,6 @@ mem_init (void)
 	long reserved_pages, codesize, datasize, initsize;
 	pg_data_t *pgdat;
 	int i;
-	static struct kcore_list kcore_mem;
 
 	BUG_ON(PTRS_PER_PGD * sizeof(pgd_t) != PAGE_SIZE);
 	BUG_ON(PTRS_PER_PMD * sizeof(pmd_t) != PAGE_SIZE);
@@ -639,8 +638,6 @@ mem_init (void)
 
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
 
-	kclist_add(&kcore_mem, __va(0), max_low_pfn * PAGE_SIZE, KCORE_RAM);
-
 	for_each_online_pgdat(pgdat)
 		if (pgdat->bdata->node_bootmem_map)
 			totalram_pages += free_all_bootmem_node(pgdat);
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 4a83da499e2..15aa1902a78 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -352,7 +352,6 @@ void __init paging_init(void)
 	free_area_init_nodes(max_zone_pfns);
 }
 
-static struct kcore_list kcore_mem;
 #ifdef CONFIG_64BIT
 static struct kcore_list kcore_kseg0;
 #endif
@@ -412,7 +411,6 @@ void __init mem_init(void)
 		kclist_add(&kcore_kseg0, (void *) CKSEG0,
 				0x80000000 - 4, KCORE_TEXT);
 #endif
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
 
 	printk(KERN_INFO "Memory: %luk/%luk available (%ldk kernel code, "
 	       "%ldk reserved, %ldk data, %ldk init, %ldk highmem)\n",
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 38a450d16b2..9ddcfb4dc13 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -242,35 +242,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-#ifdef CONFIG_PROC_KCORE
-
-static int __init setup_kcore(void)
-{
-	int i;
-
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		unsigned long base;
-		unsigned long size;
-		struct kcore_list *kcore_mem;
-
-		base = lmb.memory.region[i].base;
-		size = lmb.memory.region[i].size;
-
-		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
-		if (!kcore_mem)
-			panic("%s: kmalloc failed\n", __func__);
-
-		/* must stay under 32 bits */
-		if ( 0xfffffffful - (unsigned long)__va(base) < size) {
-			size = 0xfffffffful - (unsigned long)(__va(base));
-			printk(KERN_DEBUG "setup_kcore: restrict size=%lx\n",
-						size);
-		}
-
-		kclist_add(kcore_mem, __va(base), size, KCORE_RAM);
-	}
-
-	return 0;
-}
-module_init(setup_kcore);
-#endif
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 87ef492a1a5..335c578b9cc 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -109,32 +109,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-#ifdef CONFIG_PROC_KCORE
-
-static int __init setup_kcore(void)
-{
-	int i;
-
-	for (i=0; i < lmb.memory.cnt; i++) {
-		unsigned long base, size;
-		struct kcore_list *kcore_mem;
-
-		base = lmb.memory.region[i].base;
-		size = lmb.memory.region[i].size;
-
-		/* GFP_ATOMIC to avoid might_sleep warnings during boot */
-		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
-		if (!kcore_mem)
-			panic("%s: kmalloc failed\n", __func__);
-
-		kclist_add(kcore_mem, __va(base), size, KCORE_RAM);
-	}
-
-	return 0;
-}
-module_init(setup_kcore);
-#endif
-
 static void pgd_ctor(void *addr)
 {
 	memset(addr, 0, PGD_TABLE_SIZE);
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index bf8bd026db5..8173e38afd3 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -186,8 +186,6 @@ void __init paging_init(void)
 	set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
 }
 
-static struct kcore_list kcore_mem;
-
 void __init mem_init(void)
 {
 	int codesize, datasize, initsize;
@@ -226,8 +224,6 @@ void __init mem_init(void)
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
-
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 	       "%dk data, %dk init)\n",
 		nr_free_pages() << (PAGE_SHIFT-10),
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 7108678ca9b..30938c1d8d5 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -857,8 +857,6 @@ static void __init test_wp_bit(void)
 	}
 }
 
-static struct kcore_list kcore_mem;
-
 void __init mem_init(void)
 {
 	int codesize, reservedpages, datasize, initsize;
@@ -886,8 +884,6 @@ void __init mem_init(void)
 	datasize =  (unsigned long) &_edata - (unsigned long) &_etext;
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
-
 	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
 			"%dk reserved, %dk data, %dk init, %ldk highmem)\n",
 		nr_free_pages() << (PAGE_SHIFT-10),
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index a0c2efb10cb..d5d23cc2407 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -647,7 +647,7 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-static struct kcore_list kcore_mem, kcore_modules, kcore_vsyscall;
+static struct kcore_list kcore_modules, kcore_vsyscall;
 
 void __init mem_init(void)
 {
@@ -676,7 +676,6 @@ void __init mem_init(void)
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
 	/* Register memory areas for /proc/kcore */
-	kclist_add(&kcore_mem, __va(0), max_low_pfn << PAGE_SHIFT, KCORE_RAM);
 	kclist_add(&kcore_modules, (void *)MODULES_VADDR, MODULES_LEN,
 			KCORE_OTHER);
 	kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START,
-- 
cgit v1.2.3


From 81ac3ad9061dd9cd490ee92f0c5316a14d77ce18 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Tue, 22 Sep 2009 16:45:49 -0700
Subject: kcore: register module area in generic way

Some archs define MODULED_VADDR/MODULES_END which is not in VMALLOC area.
This is handled only in x86-64.  This patch make it more generic.  And we
can use vread/vwrite to access the area.  Fix it.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/init_64.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index d5d23cc2407..5a4398a6006 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -647,7 +647,7 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
 
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-static struct kcore_list kcore_modules, kcore_vsyscall;
+static struct kcore_list kcore_vsyscall;
 
 void __init mem_init(void)
 {
@@ -676,8 +676,6 @@ void __init mem_init(void)
 	initsize =  (unsigned long) &__init_end - (unsigned long) &__init_begin;
 
 	/* Register memory areas for /proc/kcore */
-	kclist_add(&kcore_modules, (void *)MODULES_VADDR, MODULES_LEN,
-			KCORE_OTHER);
 	kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START,
 			 VSYSCALL_END - VSYSCALL_START, KCORE_OTHER);
 
-- 
cgit v1.2.3


From b5f3294f0be5496aec01e5aa709a5fab8bb2f225 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 22 Sep 2009 16:46:02 -0700
Subject: spi: add SPI driver for most known i.MX SoCs

This driver has been tested on i.MX1/i.MX27/i.MX35 with an AT25 type
EEPROM and on i.MX27/i.MX31 with a Freescale MC13783 PMIC.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Andrea Paterniani <a.paterniani@swapp-eng.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-mxc/include/mach/spi.h | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/spi.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/spi.h b/arch/arm/plat-mxc/include/mach/spi.h
new file mode 100644
index 00000000000..08be445e8eb
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/spi.h
@@ -0,0 +1,27 @@
+
+#ifndef __MACH_SPI_H_
+#define __MACH_SPI_H_
+
+/*
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
+ *              pins, numbers < 0 mean internal CSPI chipselects according
+ *              to MXC_SPI_CS(). Normally you want to use gpio based chip
+ *              selects as the CSPI module tries to be intelligent about
+ *              when to assert the chipselect: The CSPI module deasserts the
+ *              chipselect once it runs out of input data. The other problem
+ *              is that it is not possible to mix between high active and low
+ *              active chipselects on one single bus using the internal
+ *              chipselects. Unfortunately Freescale decided to put some
+ *              chipselects on dedicated pins which are not usable as gpios,
+ *              so we have to support the internal chipselects.
+ * @num_chipselect: ARRAY_SIZE(chipselect)
+ */
+struct spi_imx_master {
+	int	*chipselect;
+	int	num_chipselect;
+};
+
+#define MXC_SPI_CS(no)	((no) - 32)
+
+#endif /* __MACH_SPI_H_*/
-- 
cgit v1.2.3


From 7869c0b9ed44404bbc675ef76f8ccb3be5496f39 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 22 Sep 2009 16:46:18 -0700
Subject: spi: McSPI support for OMAP4

tAdd adds McSPI support for OMAP4430 SDP platform.  All the base addresses
are changed between OMAP1/2/3 and OMAP4.  The fields of the resource
structures are filled at runtime to have McSPI support on OMAP4.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-omap2/devices.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 92009a4c6c8..bcfcfc7fdb9 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -257,6 +257,11 @@ static inline void omap_init_sti(void) {}
 #define OMAP2_MCSPI3_BASE		0x480b8000
 #define OMAP2_MCSPI4_BASE		0x480ba000
 
+#define OMAP4_MCSPI1_BASE		0x48098100
+#define OMAP4_MCSPI2_BASE		0x4809a100
+#define OMAP4_MCSPI3_BASE		0x480b8100
+#define OMAP4_MCSPI4_BASE		0x480ba100
+
 static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
 	.num_cs		= 4,
 };
@@ -301,7 +306,8 @@ static struct platform_device omap2_mcspi2 = {
 	},
 };
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+	defined(CONFIG_ARCH_OMAP4)
 static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
 	.num_cs		= 2,
 };
@@ -325,7 +331,7 @@ static struct platform_device omap2_mcspi3 = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP3
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 static struct omap2_mcspi_platform_config omap2_mcspi4_config = {
 	.num_cs		= 1,
 };
@@ -351,14 +357,25 @@ static struct platform_device omap2_mcspi4 = {
 
 static void omap_init_mcspi(void)
 {
+	if (cpu_is_omap44xx()) {
+		omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
+		omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
+		omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
+		omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
+		omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
+		omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
+		omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
+		omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
+	}
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
-	if (cpu_is_omap2430() || cpu_is_omap343x())
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+	defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
 		platform_device_register(&omap2_mcspi3);
 #endif
-#ifdef CONFIG_ARCH_OMAP3
-	if (cpu_is_omap343x())
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	if (cpu_is_omap343x() || cpu_is_omap44xx())
 		platform_device_register(&omap2_mcspi4);
 #endif
 }
-- 
cgit v1.2.3


From 66d2f99d0bb5a2972fb5c1d88b61169510e540d6 Mon Sep 17 00:00:00 2001
From: Imre Deak <imre.deak@nokia.com>
Date: Tue, 22 Sep 2009 16:46:41 -0700
Subject: omapfb: add support for MIPI-DCS compatible LCDs

Fixed-by: Mike Wege <ext-mike.wege@nokia.com>
Fixed-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Fixed-by: Timo Savola <tsavola@movial.fi>
Fixed-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Fixed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-omap/include/mach/lcd_mipid.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
index f8fbc4801e5..8e52c657228 100644
--- a/arch/arm/plat-omap/include/mach/lcd_mipid.h
+++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h
@@ -16,7 +16,12 @@ enum mipid_test_result {
 struct mipid_platform_data {
 	int	nreset_gpio;
 	int	data_lines;
+
 	void	(*shutdown)(struct mipid_platform_data *pdata);
+	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
+				     int level);
+	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
+	int	(*get_bklight_max)(struct mipid_platform_data *pdata);
 };
 
 #endif
-- 
cgit v1.2.3


From fb49b78452503f6cdf8b243ccb40cda81aae9998 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@mvista.com>
Date: Tue, 22 Sep 2009 16:46:48 -0700
Subject: omapfb: add support for the 3430SDP LCD

The 3430SDP uses the same panel as the 2430SDP.  The main difference are
in the GPIO lines used for panel enable and backlight, and the VAUX
register/commands sent to the TWL4030 power subsystem.

Also, some misc. whitespace cleanups.

Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kevin Hilman <khilman@mvsita.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/omap_3430sdp_defconfig | 39 +++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 9a510eab75a..8a4a7e2ba87 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1313,8 +1313,33 @@ CONFIG_DVB_ISL6421=m
 # Graphics support
 #
 # CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1331,6 +1356,16 @@ CONFIG_DISPLAY_SUPPORT=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-- 
cgit v1.2.3


From 27969ccc2840c42bfbe4f55d08f0c7ec254d4e93 Mon Sep 17 00:00:00 2001
From: Koen Kooi <koen@openembedded.org>
Date: Tue, 22 Sep 2009 16:46:50 -0700
Subject: omapfb: add support for the OMAP3 Beagle DVI output

The default resolution is 1024x768@24bit

This version addresses the comments from Felipe Balbi adn Arun Edarath

Fixed-by: Felipe Contreras <felipe.contreras@gmail.com>
Fixed-by: Steve Sakoman <steve@sakoman.com>
Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Koen Kooi <koen@openembedded.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/omap3_beagle_defconfig | 47 ++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index 51c0fa8897c..357d4021e2d 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -778,7 +778,33 @@ CONFIG_DAB=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -791,6 +817,25 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
-- 
cgit v1.2.3


From 8fea8844a72f95ef22b108f5dc5c4237019771dd Mon Sep 17 00:00:00 2001
From: "Stanley.Miao" <stanley.miao@windriver.com>
Date: Tue, 22 Sep 2009 16:46:52 -0700
Subject: omapfb: add support for the ZOOM MDK LCD

Add glue to control the OMAP_LDP LCD as a frame buffer device using the
existing dispc.c driver under omapfb.

Patch updated for mainline kernel.  Note that the drivers/video/omap
should be updated to pass omap_lcd_config in platform_data.  The patch
should also be updated to compile if twl4030 is not selected, and
eventually to use the regulator framework.

Fixed-by: Jarkko Nikula <jarkko.nikula@gmail.com>
Fixed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/omap_ldp_defconfig | 54 +++++++++++++++++++++++++++++++++++--
 1 file changed, 52 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index 679a4a3e265..b9c48919a68 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -690,6 +690,7 @@ CONFIG_GPIOLIB=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
 
 #
 # PCI GPIO expanders:
@@ -742,6 +743,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
@@ -767,8 +769,46 @@ CONFIG_DAB=y
 #
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCD_VGA=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
 
 #
 # Display device support
@@ -780,6 +820,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_SEQUENCER is not set
-- 
cgit v1.2.3


From c8f1c1b9e120223ab5b619ff0fc1f32c635248ad Mon Sep 17 00:00:00 2001
From: Imre Deak <imre.deak@nokia.com>
Date: Tue, 22 Sep 2009 16:46:54 -0700
Subject: N770: enable LCD MIPI-DCS in Kconfig

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/configs/n770_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 672f6db06a5..a1657b73683 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -875,7 +875,7 @@ CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
 # CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
-# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_LCD_MIPID=y
 # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 # CONFIG_FB_OMAP_DMA_TUNE is not set
-- 
cgit v1.2.3


From 5910d35cd6c0122a490000a6de0774ac7ebcc2de Mon Sep 17 00:00:00 2001
From: arun c <arunedarath@mistralsolutions.com>
Date: Tue, 22 Sep 2009 16:46:59 -0700
Subject: omapfb: fix coding style / remove dead line

- use __iomem type attribute where appropriate
- expand (a ? : b) to (a ? a : b)
As suggested by Russel King <linux@arm.linux.org.uk>

- remove a dead line from omapfb_main.c

Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-omap/include/mach/omapfb.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index 7b74d1255e0..b226bdf4573 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -276,8 +276,8 @@ typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
 					  void *fbi);
 
 struct omapfb_mem_region {
-	dma_addr_t	paddr;
-	void		*vaddr;
+	u32		paddr;
+	void __iomem	*vaddr;
 	unsigned long	size;
 	u8		type;		/* OMAPFB_PLANE_MEM_* */
 	unsigned	alloc:1;	/* allocated by the driver */
-- 
cgit v1.2.3


From c6012189a40d33213ead5d15769fab615443206f Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Tue, 22 Sep 2009 16:47:09 -0700
Subject: ep93xx video driver platform support

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Daniele Venzano <linux@brownhat.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-ep93xx/clock.c                    | 88 ++++++++++++++++++++++++-
 arch/arm/mach-ep93xx/core.c                     | 32 +++++++++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  6 ++
 arch/arm/mach-ep93xx/include/mach/fb.h          | 56 ++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/platform.h    |  2 +
 5 files changed, 183 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-ep93xx/include/mach/fb.h

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 3dd0e2a2309..dda19cd7619 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -37,7 +37,7 @@ struct clk {
 static unsigned long get_uart_rate(struct clk *clk);
 
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
-
+static int set_div_rate(struct clk *clk, unsigned long rate);
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -76,6 +76,13 @@ static struct clk clk_pwm = {
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
+static struct clk clk_video = {
+	.sw_locked	= 1,
+	.enable_reg     = EP93XX_SYSCON_VIDCLKDIV,
+	.enable_mask    = EP93XX_SYSCON_CLKDIV_ENABLE,
+	.set_rate	= set_div_rate,
+};
+
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
@@ -140,6 +147,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -236,6 +244,84 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
+				  int *pdiv, int *div)
+{
+	unsigned long max_rate, best_rate = 0,
+		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	int i, found = 0, __div = 0, __pdiv = 0;
+
+	/* Don't exceed the maximum rate */
+	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
+		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+	rate = min(rate, max_rate);
+
+	/*
+	 * Try the two pll's and the external clock
+	 * Because the valid predividers are 2, 2.5 and 3, we multiply
+	 * all the clocks by 2 to avoid floating point math.
+	 *
+	 * This is based on the algorithm in the ep93xx raster guide:
+	 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
+	 *
+	 */
+	for (i = 0; i < 3; i++) {
+		if (i == 0)
+			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+		else if (i == 1)
+			mclk_rate = clk_pll1.rate * 2;
+		else if (i == 2)
+			mclk_rate = clk_pll2.rate * 2;
+
+		/* Try each predivider value */
+		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
+			__div = mclk_rate / (rate * __pdiv);
+			if (__div < 2 || __div > 127)
+				continue;
+
+			actual_rate = mclk_rate / (__pdiv * __div);
+
+			if (!found || abs(actual_rate - rate) < rate_err) {
+				*pdiv = __pdiv - 3;
+				*div = __div;
+				*psel = (i == 2);
+				*esel = (i != 0);
+				best_rate = actual_rate;
+				rate_err = abs(actual_rate - rate);
+				found = 1;
+			}
+		}
+	}
+
+	if (!found)
+		return 0;
+
+	return best_rate;
+}
+
+static int set_div_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long actual_rate;
+	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	u32 val;
+
+	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
+	if (actual_rate == 0)
+		return -EINVAL;
+	clk->rate = actual_rate;
+
+	/* Clear the esel, psel, pdiv and div bits */
+	val = __raw_readl(clk->enable_reg);
+	val &= ~0x7fff;
+
+	/* Set the new esel, psel, pdiv and div bits for the new clock rate */
+	val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) |
+		(psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) |
+		(pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	return 0;
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->set_rate)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 16b92c37ec9..f7ebed942f6 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -30,6 +30,7 @@
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -682,6 +683,37 @@ void ep93xx_pwm_release_gpio(struct platform_device *pdev)
 EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
 
 
+/*************************************************************************
+ * EP93xx video peripheral handling
+ *************************************************************************/
+static struct ep93xxfb_mach_info ep93xxfb_data;
+
+static struct resource ep93xx_fb_resource[] = {
+	{
+		.start		= EP93XX_RASTER_PHYS_BASE,
+		.end		= EP93XX_RASTER_PHYS_BASE + 0x800 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_fb_device = {
+	.name			= "ep93xx-fb",
+	.id			= -1,
+	.dev			= {
+		.platform_data	= &ep93xxfb_data,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
+	},
+	.num_resources		= ARRAY_SIZE(ep93xx_fb_resource),
+	.resource		= ep93xx_fb_resource,
+};
+
+void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
+{
+	ep93xxfb_data = *data;
+	platform_device_register(&ep93xx_fb_device);
+}
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index ea78e908fc8..0fbf87b1633 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -70,6 +70,7 @@
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
+#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -207,6 +208,11 @@
 #define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
+#define EP93XX_SYSCON_CLKDIV_ENABLE	(1<<15)
+#define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
+#define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
+#define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
 #define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
diff --git a/arch/arm/mach-ep93xx/include/mach/fb.h b/arch/arm/mach-ep93xx/include/mach/fb.h
new file mode 100644
index 00000000000..d5ae11d7c45
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/fb.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/fb.h
+ */
+
+#ifndef __ASM_ARCH_EP93XXFB_H
+#define __ASM_ARCH_EP93XXFB_H
+
+struct platform_device;
+struct fb_videomode;
+struct fb_info;
+
+#define EP93XXFB_USE_MODEDB		0
+
+/* VideoAttributes flags */
+#define EP93XXFB_STATE_MACHINE_ENABLE	(1 << 0)
+#define EP93XXFB_PIXEL_CLOCK_ENABLE	(1 << 1)
+#define EP93XXFB_VSYNC_ENABLE		(1 << 2)
+#define EP93XXFB_PIXEL_DATA_ENABLE	(1 << 3)
+#define EP93XXFB_COMPOSITE_SYNC		(1 << 4)
+#define EP93XXFB_SYNC_VERT_HIGH		(1 << 5)
+#define EP93XXFB_SYNC_HORIZ_HIGH	(1 << 6)
+#define EP93XXFB_SYNC_BLANK_HIGH	(1 << 7)
+#define EP93XXFB_PCLK_FALLING		(1 << 8)
+#define EP93XXFB_ENABLE_AC		(1 << 9)
+#define EP93XXFB_ENABLE_LCD		(1 << 10)
+#define EP93XXFB_ENABLE_CCIR		(1 << 12)
+#define EP93XXFB_USE_PARALLEL_INTERFACE	(1 << 13)
+#define EP93XXFB_ENABLE_INTERRUPT	(1 << 14)
+#define EP93XXFB_USB_INTERLACE		(1 << 16)
+#define EP93XXFB_USE_EQUALIZATION	(1 << 17)
+#define EP93XXFB_USE_DOUBLE_HORZ	(1 << 18)
+#define EP93XXFB_USE_DOUBLE_VERT	(1 << 19)
+#define EP93XXFB_USE_BLANK_PIXEL	(1 << 20)
+#define EP93XXFB_USE_SDCSN0		(0 << 21)
+#define EP93XXFB_USE_SDCSN1		(1 << 21)
+#define EP93XXFB_USE_SDCSN2		(2 << 21)
+#define EP93XXFB_USE_SDCSN3		(3 << 21)
+
+#define EP93XXFB_ENABLE			(EP93XXFB_STATE_MACHINE_ENABLE	| \
+					 EP93XXFB_PIXEL_CLOCK_ENABLE	| \
+					 EP93XXFB_VSYNC_ENABLE		| \
+					 EP93XXFB_PIXEL_DATA_ENABLE)
+
+struct ep93xxfb_mach_info {
+	unsigned int			num_modes;
+	const struct fb_videomode	*modes;
+	const struct fb_videomode	*default_mode;
+	int				bpp;
+	unsigned int			flags;
+
+	int	(*setup)(struct platform_device *pdev);
+	void	(*teardown)(struct platform_device *pdev);
+	void	(*blank)(int blank_mode, struct fb_info *info);
+};
+
+#endif /* __ASM_ARCH_EP93XXFB_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 5f5fa6574d3..01a0f0838e5 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -6,6 +6,7 @@
 
 struct i2c_board_info;
 struct platform_device;
+struct ep93xxfb_mach_info;
 
 struct ep93xx_eth_data
 {
@@ -33,6 +34,7 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
-- 
cgit v1.2.3


From 11868a2dc4f5e4f2f652bfd259e1360193fcee62 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 23 Sep 2009 17:49:55 +0200
Subject: x86: mce: Use safer ways to access MCE registers

Use rdmsrl_safe() when accessing MCE registers. While in
theory we always 'know' which ones are safe to access from
the capability bits, there's a lot of hardware variations
and reality might differ from theory, as it did in this case:

   http://bugzilla.kernel.org/show_bug.cgi?id=14204

[    0.010016] mce: CPU supports 5 MCE banks
[    0.011029] general protection fault: 0000 [#1]
[    0.011998] last sysfs file:
[    0.011998] Modules linked in:
[    0.011998]
[    0.011998] Pid: 0, comm: swapper Not tainted (2.6.31_router #1) HP Vectra
[    0.011998] EIP: 0060:[<c100d9b9>] EFLAGS: 00010246 CPU: 0
[    0.011998] EIP is at mce_rdmsrl+0x19/0x60
[    0.011998] EAX: 00000000 EBX: 00000001 ECX: 00000407 EDX: 08000000
[    0.011998] ESI: 00000000 EDI: 8c000000 EBP: 00000405 ESP: c17d5eac

So WARN_ONCE() instead of crashing the box.

( also fix a number of stylistic inconsistencies in the code. )

Note, we might still crash in wrmsrl() if we get that far, but
we shouldnt if the registers are truly inaccessible.

Reported-by: GNUtoo <GNUtoo@no-log.org>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <bug-14204-5438@http.bugzilla.kernel.org/>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 2f5aab26320..4b2af86e3e8 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -305,13 +305,25 @@ static int msr_to_offset(u32 msr)
 static u64 mce_rdmsrl(u32 msr)
 {
 	u64 v;
+
 	if (__get_cpu_var(injectm).finished) {
 		int offset = msr_to_offset(msr);
+
 		if (offset < 0)
 			return 0;
 		return *(u64 *)((char *)&__get_cpu_var(injectm) + offset);
 	}
-	rdmsrl(msr, v);
+
+	if (rdmsrl_safe(msr, &v)) {
+		WARN_ONCE(1, "mce: Unable to read msr %d!\n", msr);
+		/*
+		 * Return zero in case the access faulted. This should
+		 * not happen normally but can happen if the CPU does
+		 * something weird, or if the code is buggy.
+		 */
+		v = 0;
+	}
+
 	return v;
 }
 
@@ -319,6 +331,7 @@ static void mce_wrmsrl(u32 msr, u64 v)
 {
 	if (__get_cpu_var(injectm).finished) {
 		int offset = msr_to_offset(msr);
+
 		if (offset >= 0)
 			*(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v;
 		return;
@@ -415,7 +428,7 @@ static inline void mce_get_rip(struct mce *m, struct pt_regs *regs)
 		m->ip = mce_rdmsrl(rip_msr);
 }
 
-#ifdef CONFIG_X86_LOCAL_APIC 
+#ifdef CONFIG_X86_LOCAL_APIC
 /*
  * Called after interrupts have been reenabled again
  * when a MCE happened during an interrupts off region
@@ -1172,6 +1185,7 @@ static int mce_banks_init(void)
 		return -ENOMEM;
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		b->ctl = -1ULL;
 		b->init = 1;
 	}
@@ -1203,6 +1217,7 @@ static int __cpuinit mce_cap_init(void)
 	banks = b;
 	if (!mce_banks) {
 		int err = mce_banks_init();
+
 		if (err)
 			return err;
 	}
@@ -1237,6 +1252,7 @@ static void mce_init(void)
 
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (!b->init)
 			continue;
 		wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
@@ -1626,6 +1642,7 @@ static int mce_disable(void)
 
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
@@ -1911,6 +1928,7 @@ static void mce_disable_cpu(void *h)
 		cmci_clear();
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
@@ -1928,6 +1946,7 @@ static void mce_reenable_cpu(void *h)
 		cmci_reenable();
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
 	}
-- 
cgit v1.2.3


From cf63ff5fa4399e215cc5ef322ccd8bddfff9afa6 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Wed, 23 Sep 2009 10:33:54 +0100
Subject: misc: remove redundant start_kernel prototypes

Impact: cleanup

No need for redeclaration.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/include/asm/gdb-stub.h     | 1 -
 arch/frv/kernel/debug-stub.c        | 1 +
 arch/mn10300/include/asm/gdb-stub.h | 1 -
 3 files changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/frv/include/asm/gdb-stub.h b/arch/frv/include/asm/gdb-stub.h
index 24f9738670b..2da716407ff 100644
--- a/arch/frv/include/asm/gdb-stub.h
+++ b/arch/frv/include/asm/gdb-stub.h
@@ -90,7 +90,6 @@ extern void gdbstub_do_rx(void);
 extern asmlinkage void __debug_stub_init_break(void);
 extern asmlinkage void __break_hijack_kernel_event(void);
 extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
-extern asmlinkage void start_kernel(void);
 
 extern asmlinkage void gdbstub_rx_handler(void);
 extern asmlinkage void gdbstub_rx_irq(void);
diff --git a/arch/frv/kernel/debug-stub.c b/arch/frv/kernel/debug-stub.c
index 2f6c60c921e..2845139c807 100644
--- a/arch/frv/kernel/debug-stub.c
+++ b/arch/frv/kernel/debug-stub.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/serial_reg.h>
+#include <linux/start_kernel.h>
 
 #include <asm/system.h>
 #include <asm/serial-regs.h>
diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h
index e5a6368559a..556cce99254 100644
--- a/arch/mn10300/include/asm/gdb-stub.h
+++ b/arch/mn10300/include/asm/gdb-stub.h
@@ -109,7 +109,6 @@ extern asmlinkage int  gdbstub_intercept(struct pt_regs *, enum exception_code);
 extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
 extern asmlinkage void __gdbstub_bug_trap(void);
 extern asmlinkage void __gdbstub_pause(void);
-extern asmlinkage void start_kernel(void);
 
 #ifndef CONFIG_MN10300_CACHE_DISABLED
 extern asmlinkage void gdbstub_purge_cache(void);
-- 
cgit v1.2.3


From a70770998c1d99e86eea97294ae3cce059a18d7e Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 23 Sep 2009 10:04:02 +0100
Subject: FRV: Use asm/generic-hardirq.h

Use asm/generic-hardirq.h to build asm/hardirq.h and also remove the unused
idle_timestamp field in irq_cpustat whilst we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/include/asm/hardirq.h | 17 ++++-------------
 arch/frv/kernel/process.c      |  4 ----
 2 files changed, 4 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/frv/include/asm/hardirq.h b/arch/frv/include/asm/hardirq.h
index fc47515822a..5fc8b6f5bc5 100644
--- a/arch/frv/include/asm/hardirq.h
+++ b/arch/frv/include/asm/hardirq.h
@@ -12,24 +12,15 @@
 #ifndef __ASM_HARDIRQ_H
 #define __ASM_HARDIRQ_H
 
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-	unsigned long idle_timestamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#ifdef CONFIG_SMP
-#error SMP not available on FR-V
-#endif /* CONFIG_SMP */
+#include <asm/atomic.h>
 
 extern atomic_t irq_err_count;
 static inline void ack_bad_irq(int irq)
 {
 	atomic_inc(&irq_err_count);
 }
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
 
 #endif
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 0de50df7497..90425593821 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -83,13 +83,9 @@ void (*idle)(void) = core_sleep_idle;
  */
 void cpu_idle(void)
 {
-	int cpu = smp_processor_id();
-
 	/* endless idle loop with no priority at all */
 	while (1) {
 		while (!need_resched()) {
-			irq_stat[cpu].idle_timestamp = jiffies;
-
 			check_pgt_cache();
 
 			if (!frv_dma_inprogress && idle)
-- 
cgit v1.2.3


From 7043078630bbc9eb908a56e08077c5abe7f2d311 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 23 Sep 2009 10:40:24 +0100
Subject: MN10300: Handle removal of struct uart_info

Commit ebd2c8f6d2ec4012c267ecb95e72a57b8355a705 removed struct uart_info and
commit bdc04e3174e18f475289fa8f4144f66686326b7e further moved delta_msr_wait.
Fix up the MN10300 on-chip serial port drivers to comply with this.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/asm-offsets.c        |  2 +-
 arch/mn10300/kernel/mn10300-serial-low.S |  2 +-
 arch/mn10300/kernel/mn10300-serial.c     | 14 +++++++-------
 3 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/mn10300/kernel/asm-offsets.c b/arch/mn10300/kernel/asm-offsets.c
index 82b40079ad7..02dc7e461fe 100644
--- a/arch/mn10300/kernel/asm-offsets.c
+++ b/arch/mn10300/kernel/asm-offsets.c
@@ -85,7 +85,7 @@ void foo(void)
 	OFFSET(__rx_buffer,		mn10300_serial_port, rx_buffer);
 	OFFSET(__rx_inp,		mn10300_serial_port, rx_inp);
 	OFFSET(__rx_outp,		mn10300_serial_port, rx_outp);
-	OFFSET(__tx_info_buffer,	mn10300_serial_port, uart.info);
+	OFFSET(__uart_state,		mn10300_serial_port, uart.state);
 	OFFSET(__tx_xchar,		mn10300_serial_port, tx_xchar);
 	OFFSET(__tx_break,		mn10300_serial_port, tx_break);
 	OFFSET(__intr_flags,		mn10300_serial_port, intr_flags);
diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
index 22448538822..66702d25661 100644
--- a/arch/mn10300/kernel/mn10300-serial-low.S
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -130,7 +130,7 @@ ENTRY(mn10300_serial_vdma_tx_handler)
 	or	d2,d2
 	bne	mnsc_vdma_tx_xchar
 
-	mov	(__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+	mov	(__uart_state,a3),a2	# see if the TTY Tx queue has anything in it
 	mov	(__xmit_tail,a2),d3
 	mov	(__xmit_head,a2),d2
 	cmp	d3,d2
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 2fd59664d00..229b710fc5d 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -391,7 +391,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.info->port.tty;
+	struct tty_struct *tty = port->uart.state->port.tty;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
@@ -566,16 +566,16 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
 {
 	_enter("%s", port->name);
 
-	if (!port->uart.info || !port->uart.info->port.tty) {
+	if (!port->uart.state || !port->uart.state->port.tty) {
 		mn10300_serial_dis_tx_intr(port);
 		return;
 	}
 
 	if (uart_tx_stopped(&port->uart) ||
-	    uart_circ_empty(&port->uart.info->xmit))
+	    uart_circ_empty(&port->uart.state->xmit))
 		mn10300_serial_dis_tx_intr(port);
 
-	if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(&port->uart.state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&port->uart);
 }
 
@@ -596,7 +596,7 @@ static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
 	*port->_control = ctr;
 
 	uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
-	wake_up_interruptible(&port->uart.info->delta_msr_wait);
+	wake_up_interruptible(&port->uart.state->port.delta_msr_wait);
 }
 
 /*
@@ -705,8 +705,8 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
 
 	_enter("%s{%lu}",
 	       port->name,
-	       CIRC_CNT(&port->uart.info->xmit.head,
-			&port->uart.info->xmit.tail,
+	       CIRC_CNT(&port->uart.state->xmit.head,
+			&port->uart.state->xmit.tail,
 			UART_XMIT_SIZE));
 
 	/* kick the virtual DMA controller */
-- 
cgit v1.2.3


From 79f5599772ac2f138d7a75b8f3f06a93f09c75f7 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Mon, 15 Jun 2009 14:58:26 +0800
Subject: cpumask: use zalloc_cpumask_var() where possible

Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/kernel/apic/io_apic.c | 7 ++-----
 arch/x86/kernel/process.c      | 6 ++----
 arch/x86/kernel/smpboot.c      | 9 +++------
 3 files changed, 7 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 64970b9885f..dc69f28489f 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -227,17 +227,14 @@ static struct irq_cfg *get_one_free_irq_cfg(int node)
 
 	cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
 	if (cfg) {
-		if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
+		if (!zalloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
 			kfree(cfg);
 			cfg = NULL;
-		} else if (!alloc_cpumask_var_node(&cfg->old_domain,
+		} else if (!zalloc_cpumask_var_node(&cfg->old_domain,
 							  GFP_ATOMIC, node)) {
 			free_cpumask_var(cfg->domain);
 			kfree(cfg);
 			cfg = NULL;
-		} else {
-			cpumask_clear(cfg->domain);
-			cpumask_clear(cfg->old_domain);
 		}
 	}
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 847ab416031..5284cd2b577 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -555,10 +555,8 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 void __init init_c1e_mask(void)
 {
 	/* If we're using c1e_idle, we need to allocate c1e_mask. */
-	if (pm_idle == c1e_idle) {
-		alloc_cpumask_var(&c1e_mask, GFP_KERNEL);
-		cpumask_clear(c1e_mask);
-	}
+	if (pm_idle == c1e_idle)
+		zalloc_cpumask_var(&c1e_mask, GFP_KERNEL);
 }
 
 static int __init idle_setup(char *str)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 09c5e077dff..565ebc65920 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1059,12 +1059,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 #endif
 	current_thread_info()->cpu = 0;  /* needed? */
 	for_each_possible_cpu(i) {
-		alloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
-		alloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
-		alloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL);
-		cpumask_clear(per_cpu(cpu_core_map, i));
-		cpumask_clear(per_cpu(cpu_sibling_map, i));
-		cpumask_clear(cpu_data(i).llc_shared_map);
+		zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
+		zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
+		zalloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL);
 	}
 	set_cpu_sibling_map(0);
 
-- 
cgit v1.2.3


From 8194a40bee5c2b47e336febb3666a68154fec427 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:24 -0600
Subject: cpumask: remove the now-obsoleted pcibus_to_cpumask(): alpha

cpumask_of_pcibus() is the new version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/alpha/include/asm/topology.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
index b4f284c72ff..f5bd6cd4b3b 100644
--- a/arch/alpha/include/asm/topology.h
+++ b/arch/alpha/include/asm/topology.h
@@ -55,7 +55,6 @@ static const struct cpumask *cpumask_of_node(int node)
 	return &node_to_cpumask_map[node];
 }
 
-#define pcibus_to_cpumask(bus)	(cpu_online_map)
 #define cpumask_of_pcibus(bus)	(cpu_online_mask)
 
 #endif /* !CONFIG_NUMA */
-- 
cgit v1.2.3


From f5564b823bbe211bab98d12de7b1f7d42cfb4a87 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:25 -0600
Subject: cpumask: remove the now-obsoleted pcibus_to_cpumask(): mips

cpumask_of_pcibus() is the new version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/mips/include/asm/mach-ip27/topology.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index 23059170700..697244a7d39 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -29,7 +29,6 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 struct pci_bus;
 extern int pcibus_to_node(struct pci_bus *);
 
-#define pcibus_to_cpumask(bus)	(cpu_online_map)
 #define cpumask_of_pcibus(bus)	(cpu_online_mask)
 
 extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
-- 
cgit v1.2.3


From b966cd6b285d4cd6feaf8b06b21bc87adb907929 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:25 -0600
Subject: cpumask: remove the now-obsoleted pcibus_to_cpumask(): powerpc

cpumask_of_pcibus() is the new version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/powerpc/include/asm/topology.h | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 394edcbcce7..9a3300d6a27 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -36,11 +36,6 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 }
 #endif
 
-#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
-					CPU_MASK_ALL : \
-					node_to_cpumask(pcibus_to_node(bus)) \
-				)
-
 #define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ?		\
 				 cpu_all_mask :				\
 				 cpumask_of_node(pcibus_to_node(bus)))
-- 
cgit v1.2.3


From 29c337a034b5526e80a785409d15d3b7c7edecf4 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:26 -0600
Subject: cpumask: remove obsolete node_to_cpumask now everyone uses
 cpumask_of_node

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/alpha/include/asm/topology.h          | 17 -----------------
 arch/ia64/include/asm/topology.h           |  1 -
 arch/mips/include/asm/mach-ip27/topology.h |  1 -
 arch/mips/sgi-ip27/ip27-memory.c           |  2 +-
 arch/powerpc/include/asm/topology.h        |  5 -----
 arch/sh/include/asm/topology.h             |  1 -
 arch/sparc/include/asm/topology_64.h       | 14 --------------
 7 files changed, 1 insertion(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
index f5bd6cd4b3b..36b3a30ba0e 100644
--- a/arch/alpha/include/asm/topology.h
+++ b/arch/alpha/include/asm/topology.h
@@ -22,23 +22,6 @@ static inline int cpu_to_node(int cpu)
 	return node;
 }
 
-static inline cpumask_t node_to_cpumask(int node)
-{
-	cpumask_t node_cpu_mask = CPU_MASK_NONE;
-	int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (cpu_to_node(cpu) == node)
-			cpu_set(cpu, node_cpu_mask);
-	}
-
-#ifdef DEBUG_NUMA
-	printk("node %d: cpu_mask: %016lx\n", node, node_cpu_mask);
-#endif
-
-	return node_cpu_mask;
-}
-
 extern struct cpumask node_to_cpumask_map[];
 /* FIXME: This is dumb, recalculating every time.  But simple. */
 static const struct cpumask *cpumask_of_node(int node)
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index d0141fbf51d..e85da7f1db5 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -33,7 +33,6 @@
 /*
  * Returns a bitmask of CPUs on Node 'node'.
  */
-#define node_to_cpumask(node) (node_to_cpu_mask[node])
 #define cpumask_of_node(node) (&node_to_cpu_mask[node])
 
 /*
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index 697244a7d39..f6837422fe6 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -24,7 +24,6 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 
 #define cpu_to_node(cpu)	(sn_cpu_info[(cpu)].p_nodeid)
 #define parent_node(node)	(node)
-#define node_to_cpumask(node)	(hub_data(node)->h_cpus)
 #define cpumask_of_node(node)	(&hub_data(node)->h_cpus)
 struct pci_bus;
 extern int pcibus_to_node(struct pci_bus *);
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 060d853d7b3..f61c164d1e6 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -421,7 +421,7 @@ static void __init node_mem_init(cnodeid_t node)
 
 /*
  * A node with nothing.  We use it to avoid any special casing in
- * node_to_cpumask
+ * cpumask_of_node
  */
 static struct node_data null_node = {
 	.hub = {
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 9a3300d6a27..829bf3c9b68 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -17,11 +17,6 @@ static inline int cpu_to_node(int cpu)
 
 #define parent_node(node)	(node)
 
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return numa_cpumask_lookup_table[node];
-}
-
 #define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
 
 int of_node_to_nid(struct device_node *device);
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index f8c40cc6505..65e7bd2f224 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -31,7 +31,6 @@
 #define cpu_to_node(cpu)	((void)(cpu),0)
 #define parent_node(node)	((void)(node),0)
 
-#define node_to_cpumask(node)	((void)node, cpu_online_map)
 #define cpumask_of_node(node)	((void)node, cpu_online_mask)
 
 #define pcibus_to_node(bus)	((void)(bus), -1)
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 26cd25c0839..75752e106f4 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -12,22 +12,8 @@ static inline int cpu_to_node(int cpu)
 
 #define parent_node(node)	(node)
 
-static inline cpumask_t node_to_cpumask(int node)
-{
-	return numa_cpumask_lookup_table[node];
-}
 #define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
 
-/*
- * Returns a pointer to the cpumask of CPUs on Node 'node'.
- * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
- */
-#define node_to_cpumask_ptr(v, node)		\
-		cpumask_t *v = &(numa_cpumask_lookup_table[node])
-
-#define node_to_cpumask_ptr_next(v, node)	\
-			   v = &(numa_cpumask_lookup_table[node])
-
 struct pci_bus;
 #ifdef CONFIG_PCI
 extern int pcibus_to_node(struct pci_bus *pbus);
-- 
cgit v1.2.3


From 51c870a2d8708bda83c4ba47f26012a8420bdaff Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:35 -0600
Subject: cpumask: remove dangerous CPU_MASK_ALL_PTR, &CPU_MASK_ALL.: mips

(Thanks to Al Viro for reminding me of this, via Ingo)

CPU_MASK_ALL is the (deprecated) "all bits set" cpumask, defined as so:

	#define CPU_MASK_ALL (cpumask_t) { { ... } }

Taking the address of such a temporary is questionable at best,
unfortunately 321a8e9d (cpumask: add CPU_MASK_ALL_PTR macro) added
CPU_MASK_ALL_PTR:

	#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL)

Which formalizes this practice.  One day gcc could bite us over this
usage (though we seem to have gotten away with it so far).

So replace everywhere which used &CPU_MASK_ALL or CPU_MASK_ALL_PTR
with the modern "cpu_all_mask" (a real struct cpumask *), and remove
CPU_MASK_ALL_PTR altogether.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Travis <travis@sgi.com>
---
 arch/mips/alchemy/common/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index f34ff860194..379a664809b 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -88,7 +88,7 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.irq		= AU1000_RTC_MATCH2_INT,
 	.set_next_event	= au1x_rtcmatch2_set_next_event,
 	.set_mode	= au1x_rtcmatch2_set_mode,
-	.cpumask	= CPU_MASK_ALL_PTR,
+	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction au1x_rtcmatch2_irqaction = {
-- 
cgit v1.2.3


From 1d1afc1957a441fc75a27517b17437d8af3b3b93 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:36 -0600
Subject: cpumask: remove last assignment to mask field of struct irqaction.

This snuck in after the patch which removed all the others.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/time.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index e293ac56c72..dcb00d27851 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -93,7 +93,6 @@ static struct irqaction irq0  = {
 
 void __init setup_default_timer_irq(void)
 {
-	irq0.mask = cpumask_of_cpu(0);
 	setup_irq(0, &irq0);
 }
 
-- 
cgit v1.2.3


From da83a84b53296a2ea498be8a497c86fb4a1fd2d6 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:39 -0600
Subject: ia64: convert last user of smp_call_function_mask

smp_call_function_many is the new version: it takes a pointer.  Also,
use mm accessor macro while we're changing this.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/ia64/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 93ebfea43c6..dabeefe2113 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -302,7 +302,7 @@ smp_flush_tlb_mm (struct mm_struct *mm)
 		return;
 	}
 
-	smp_call_function_mask(mm->cpu_vm_mask,
+	smp_call_function_many(mm_cpumask(mm),
 		(void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
 	local_irq_disable();
 	local_finish_flush_tlb_mm(mm);
-- 
cgit v1.2.3


From 434e2187e69b97ad8d035258766e1ea56067625d Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:41 -0600
Subject: cpumask: remove obsolete topology_core_siblings and
 topology_thread_siblings: sparc

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/sparc/include/asm/topology_64.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index 75752e106f4..600a79035fa 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -57,8 +57,6 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 #ifdef CONFIG_SMP
 #define topology_physical_package_id(cpu)	(cpu_data(cpu).proc_id)
 #define topology_core_id(cpu)			(cpu_data(cpu).core_id)
-#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
-#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
 #define topology_core_cpumask(cpu)		(&cpu_core_map[cpu])
 #define topology_thread_cpumask(cpu)		(&per_cpu(cpu_sibling_map, cpu))
 #define mc_capable()				(sparc64_multi_core)
-- 
cgit v1.2.3


From 4f269bf5e1652370164a0b4b04db7c47c0c96a8a Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:41 -0600
Subject: cpumask: remove obsolete topology_core_siblings and
 topology_thread_siblings: s390

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/s390/include/asm/topology.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index 5e0ad618dc4..6e7211abd95 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -9,7 +9,6 @@ const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
 
 extern cpumask_t cpu_core_map[NR_CPUS];
 
-#define topology_core_siblings(cpu)	(cpu_core_map[cpu])
 #define topology_core_cpumask(cpu)	(&cpu_core_map[cpu])
 
 int topology_set_cpu_management(int fc);
-- 
cgit v1.2.3


From 399d0682704144ddadb27164343a265774d8b301 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:42 -0600
Subject: cpumask: remove obsolete topology_core_siblings and
 topology_thread_siblings: powerpc

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/powerpc/include/asm/topology.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 829bf3c9b68..22f738d12ad 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -94,8 +94,6 @@ static inline void sysfs_remove_device_from_node(struct sys_device *dev,
 #ifdef CONFIG_PPC64
 #include <asm/smp.h>
 
-#define topology_thread_siblings(cpu)	(per_cpu(cpu_sibling_map, cpu))
-#define topology_core_siblings(cpu)	(per_cpu(cpu_core_map, cpu))
 #define topology_thread_cpumask(cpu)	(&per_cpu(cpu_sibling_map, cpu))
 #define topology_core_cpumask(cpu)	(&per_cpu(cpu_core_map, cpu))
 #define topology_core_id(cpu)		(cpu_to_core_id(cpu))
-- 
cgit v1.2.3


From e50a6f19537362ed61f7f74af724345975e602ed Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:42 -0600
Subject: cpumask: remove obsolete topology_core_siblings and
 topology_thread_siblings: ia64

There were replaced by topology_core_cpumask and topology_thread_cpumask.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/ia64/include/asm/topology.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
index e85da7f1db5..3ddb4e709db 100644
--- a/arch/ia64/include/asm/topology.h
+++ b/arch/ia64/include/asm/topology.h
@@ -103,8 +103,6 @@ void build_cpu_to_node_map(void);
 #ifdef CONFIG_SMP
 #define topology_physical_package_id(cpu)	(cpu_data(cpu)->socket_id)
 #define topology_core_id(cpu)			(cpu_data(cpu)->core_id)
-#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
-#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
 #define topology_core_cpumask(cpu)		(&cpu_core_map[cpu])
 #define topology_thread_cpumask(cpu)		(&per_cpu(cpu_sibling_map, cpu))
 #define smt_capable() 				(smp_num_siblings > 1)
-- 
cgit v1.2.3


From 81065e4f2b525410d0c80040140e086abfbf7de2 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:43 -0600
Subject: cpumask: arch_send_call_function_ipi_mask: alpha

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask().

We also take the chance to wean the send_ipi_message off the
obsolescent for_each_cpu_mask(): making it take a pointer seemed the
most natural way to do this.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/alpha/include/asm/smp.h |  3 ++-
 arch/alpha/kernel/smp.c      | 14 +++++++-------
 2 files changed, 9 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/smp.h b/arch/alpha/include/asm/smp.h
index 547e90951ce..8818a1bcdc8 100644
--- a/arch/alpha/include/asm/smp.h
+++ b/arch/alpha/include/asm/smp.h
@@ -47,7 +47,8 @@ extern struct cpuinfo_alpha cpu_data[NR_CPUS];
 extern int smp_num_cpus;
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #else /* CONFIG_SMP */
 
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index b1fe5674c3a..42aa078a5e4 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -548,16 +548,16 @@ setup_profiling_timer(unsigned int multiplier)
 
 
 static void
-send_ipi_message(cpumask_t to_whom, enum ipi_message_type operation)
+send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
 	int i;
 
 	mb();
-	for_each_cpu_mask(i, to_whom)
+	for_each_cpu(i, to_whom)
 		set_bit(operation, &ipi_data[i].bits);
 
 	mb();
-	for_each_cpu_mask(i, to_whom)
+	for_each_cpu(i, to_whom)
 		wripir(i);
 }
 
@@ -624,7 +624,7 @@ smp_send_reschedule(int cpu)
 		printk(KERN_WARNING
 		       "smp_send_reschedule: Sending IPI to self.\n");
 #endif
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
 void
@@ -636,17 +636,17 @@ smp_send_stop(void)
 	if (hard_smp_processor_id() != boot_cpu_id)
 		printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
 #endif
-	send_ipi_message(to_whom, IPI_CPU_STOP);
+	send_ipi_message(&to_whom, IPI_CPU_STOP);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 static void
-- 
cgit v1.2.3


From c2a3a4881dc851ec9b5bdc83fdc03afa31d6fbed Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:43 -0600
Subject: cpumask: arch_send_call_function_ipi_mask: m32r

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask(), and by defining
it, the old arch_send_call_function_ipi is defined by the core code.

We also take the chance to wean the implementations off the
obsolescent for_each_cpu_mask(): making send_ipi_mask take the pointer
seemed the most natural way to ensure all implementations used
for_each_cpu.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/m32r/include/asm/smp.h |  3 ++-
 arch/m32r/kernel/smp.c      | 22 +++++++++++-----------
 2 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h
index b96a6d2ffbc..c2be49d408a 100644
--- a/arch/m32r/include/asm/smp.h
+++ b/arch/m32r/include/asm/smp.h
@@ -88,7 +88,8 @@ extern void smp_send_timer(void);
 extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #endif	/* not __ASSEMBLY__ */
 
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 929e5c9d3ad..45c512bcd4c 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -85,7 +85,7 @@ void smp_ipi_timer_interrupt(struct pt_regs *);
 void smp_local_timer_interrupt(void);
 
 static void send_IPI_allbutself(int, int);
-static void send_IPI_mask(cpumask_t, int, int);
+static void send_IPI_mask(const struct cpumask *, int, int);
 unsigned long send_IPI_mask_phys(cpumask_t, int, int);
 
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
@@ -113,7 +113,7 @@ unsigned long send_IPI_mask_phys(cpumask_t, int, int);
 void smp_send_reschedule(int cpu_id)
 {
 	WARN_ON(cpu_is_offline(cpu_id));
-	send_IPI_mask(cpumask_of_cpu(cpu_id), RESCHEDULE_IPI, 1);
+	send_IPI_mask(cpumask_of(cpu_id), RESCHEDULE_IPI, 1);
 }
 
 /*==========================================================================*
@@ -168,7 +168,7 @@ void smp_flush_cache_all(void)
 	spin_lock(&flushcache_lock);
 	mask=cpus_addr(cpumask);
 	atomic_set_mask(*mask, (atomic_t *)&flushcache_cpumask);
-	send_IPI_mask(cpumask, INVALIDATE_CACHE_IPI, 0);
+	send_IPI_mask(&cpumask, INVALIDATE_CACHE_IPI, 0);
 	_flush_cache_copyback_all();
 	while (flushcache_cpumask)
 		mb();
@@ -424,7 +424,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
 	 * We have to send the IPI only to
 	 * CPUs affected.
 	 */
-	send_IPI_mask(cpumask, INVALIDATE_TLB_IPI, 0);
+	send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
 
 	while (!cpus_empty(flush_cpumask)) {
 		/* nothing. lockup detection does not belong here */
@@ -546,14 +546,14 @@ static void stop_this_cpu(void *dummy)
 	for ( ; ; );
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_IPI_mask(mask, CALL_FUNCTION_IPI, 0);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNC_SINGLE_IPI, 0);
+	send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI, 0);
 }
 
 /*==========================================================================*
@@ -729,7 +729,7 @@ static void send_IPI_allbutself(int ipi_num, int try)
 	cpumask = cpu_online_map;
 	cpu_clear(smp_processor_id(), cpumask);
 
-	send_IPI_mask(cpumask, ipi_num, try);
+	send_IPI_mask(&cpumask, ipi_num, try);
 }
 
 /*==========================================================================*
@@ -752,7 +752,7 @@ static void send_IPI_allbutself(int ipi_num, int try)
  * ---------- --- --------------------------------------------------------
  *
  *==========================================================================*/
-static void send_IPI_mask(cpumask_t cpumask, int ipi_num, int try)
+static void send_IPI_mask(const struct cpumask *cpumask, int ipi_num, int try)
 {
 	cpumask_t physid_mask, tmp;
 	int cpu_id, phys_id;
@@ -761,11 +761,11 @@ static void send_IPI_mask(cpumask_t cpumask, int ipi_num, int try)
 	if (num_cpus <= 1)	/* NO MP */
 		return;
 
-	cpus_and(tmp, cpumask, cpu_online_map);
-	BUG_ON(!cpus_equal(cpumask, tmp));
+	cpumask_and(&tmp, cpumask, cpu_online_mask);
+	BUG_ON(!cpumask_equal(cpumask, &tmp));
 
 	physid_mask = CPU_MASK_NONE;
-	for_each_cpu_mask(cpu_id, cpumask){
+	for_each_cpu(cpu_id, cpumask) {
 		if ((phys_id = cpu_to_physid(cpu_id)) != -1)
 			cpu_set(phys_id, physid_mask);
 	}
-- 
cgit v1.2.3


From 48a048fed82a8e5fdd8618574f6d3de1a0d67a50 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:44 -0600
Subject: cpumask: arch_send_call_function_ipi_mask: mips

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask(), and by defining
it, the old arch_send_call_function_ipi is defined by the core code.

We also take the chance to wean the implementations off the
obsolescent for_each_cpu_mask(): making send_ipi_mask take the pointer
seemed the most natural way to ensure all implementations used
for_each_cpu.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/mips/include/asm/smp-ops.h     | 2 +-
 arch/mips/include/asm/smp.h         | 3 ++-
 arch/mips/kernel/smp-cmp.c          | 4 ++--
 arch/mips/kernel/smp-mt.c           | 4 ++--
 arch/mips/kernel/smp-up.c           | 3 ++-
 arch/mips/kernel/smp.c              | 2 +-
 arch/mips/mipssim/sim_smtc.c        | 5 +++--
 arch/mips/mti-malta/malta-smtc.c    | 4 ++--
 arch/mips/pmc-sierra/yosemite/smp.c | 4 ++--
 arch/mips/sgi-ip27/ip27-smp.c       | 4 ++--
 arch/mips/sibyte/bcm1480/smp.c      | 5 +++--
 arch/mips/sibyte/sb1250/smp.c       | 5 +++--
 12 files changed, 25 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
index fd545547b8a..9e09af34c8a 100644
--- a/arch/mips/include/asm/smp-ops.h
+++ b/arch/mips/include/asm/smp-ops.h
@@ -19,7 +19,7 @@ struct task_struct;
 
 struct plat_smp_ops {
 	void (*send_ipi_single)(int cpu, unsigned int action);
-	void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+	void (*send_ipi_mask)(const struct cpumask *mask, unsigned int action);
 	void (*init_secondary)(void);
 	void (*smp_finish)(void);
 	void (*cpus_done)(void);
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index aaa2d4ab26d..48c1967961a 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -78,6 +78,7 @@ extern void play_dead(void);
 extern asmlinkage void smp_call_function_interrupt(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index ad0ff5dc4d5..e5cf5b88fc2 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -80,11 +80,11 @@ void cmp_send_ipi_single(int cpu, unsigned int action)
 	local_irq_restore(flags);
 }
 
-static void cmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void cmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		cmp_send_ipi_single(i, action);
 }
 
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 6f7ee5ac46e..9538ca42e00 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -141,11 +141,11 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action)
 	local_irq_restore(flags);
 }
 
-static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		vsmp_send_ipi_single(i, action);
 }
 
diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c
index 2508d55d68f..00500fea275 100644
--- a/arch/mips/kernel/smp-up.c
+++ b/arch/mips/kernel/smp-up.c
@@ -18,7 +18,8 @@ static void up_send_ipi_single(int cpu, unsigned int action)
 	panic(KERN_ERR "%s called", __func__);
 }
 
-static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void up_send_ipi_mask(const struct cpumask *mask,
+				    unsigned int action)
 {
 	panic(KERN_ERR "%s called", __func__);
 }
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 64668a93248..df2ace9558b 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -128,7 +128,7 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu_idle();
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
 }
diff --git a/arch/mips/mipssim/sim_smtc.c b/arch/mips/mipssim/sim_smtc.c
index d6e4f656ad1..5da30b6a65b 100644
--- a/arch/mips/mipssim/sim_smtc.c
+++ b/arch/mips/mipssim/sim_smtc.c
@@ -43,11 +43,12 @@ static void ssmtc_send_ipi_single(int cpu, unsigned int action)
 	/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
 }
 
-static inline void ssmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void ssmtc_send_ipi_mask(const struct cpumask *mask,
+				       unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		ssmtc_send_ipi_single(i, action);
 }
 
diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 499ffe5475d..192cfd2a539 100644
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@@ -21,11 +21,11 @@ static void msmtc_send_ipi_single(int cpu, unsigned int action)
 	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
 }
 
-static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void msmtc_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		msmtc_send_ipi_single(i, action);
 }
 
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 8ace2771623..326fe7a392e 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -97,11 +97,11 @@ static void yos_send_ipi_single(int cpu, unsigned int action)
 	}
 }
 
-static void yos_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		yos_send_ipi_single(i, action);
 }
 
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index cbcd7eb83bd..9aa8f2951df 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -165,11 +165,11 @@ static void ip27_send_ipi_single(int destid, unsigned int action)
 	REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
 }
 
-static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void ip27_send_ipi(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		ip27_send_ipi_single(i, action);
 }
 
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index 314691648c9..47b347c992e 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -82,11 +82,12 @@ static void bcm1480_send_ipi_single(int cpu, unsigned int action)
 	__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
 }
 
-static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void bcm1480_send_ipi_mask(const struct cpumask *mask,
+				  unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		bcm1480_send_ipi_single(i, action);
 }
 
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index cad14003b84..c00a5cb1128 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -70,11 +70,12 @@ static void sb1250_send_ipi_single(int cpu, unsigned int action)
 	__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
 }
 
-static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void sb1250_send_ipi_mask(const struct cpumask *mask,
+					unsigned int action)
 {
 	unsigned int i;
 
-	for_each_cpu_mask(i, mask)
+	for_each_cpu(i, mask)
 		sb1250_send_ipi_single(i, action);
 }
 
-- 
cgit v1.2.3


From f063ea02fba5782099b6730d5733ee44638df8f9 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:45 -0600
Subject: cpumask: arch_send_call_function_ipi_mask: powerpc

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask(), and by defining
it, the old arch_send_call_function_ipi is defined by the core code.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/powerpc/include/asm/smp.h | 3 ++-
 arch/powerpc/kernel/smp.c      | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index c0d3b8af931..1491bfe822d 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -146,7 +146,8 @@ extern void smp_generic_take_timebase(void);
 extern struct smp_ops_t *smp_ops;
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /* Definitions relative to the secondary CPU spin loop
  * and entry point. Not all of them exist on both 32 and
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index d387b3937cc..7f68ceb3bdb 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -189,11 +189,11 @@ void arch_send_call_function_single_ipi(int cpu)
 	smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	unsigned int cpu;
 
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu(cpu, mask)
 		smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
 }
 
-- 
cgit v1.2.3


From 630cd0460724e286d3c5cb2c33930b0ae9cd6645 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:45 -0600
Subject: cpumask: arch_send_call_function_ipi_mask: s390

We're weaning the core code off handing cpumask's around on-stack.
This introduces arch_send_call_function_ipi_mask().

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/s390/include/asm/smp.h | 3 ++-
 arch/s390/kernel/smp.c      | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index c991fe6473c..6de62189a48 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -62,7 +62,8 @@ extern struct mutex smp_cpu_state_mutex;
 extern int smp_cpu_polarization[];
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #endif
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b4b6396e6cf..c932caa5e85 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -147,11 +147,11 @@ static void smp_ext_bitcall(int cpu, ec_bit_sig sig)
 		udelay(10);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	int cpu;
 
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu(cpu, mask)
 		smp_ext_bitcall(cpu, ec_call_function);
 }
 
-- 
cgit v1.2.3


From 0748bd01773395003208996c4c0b3f80caf80976 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:46 -0600
Subject: cpumask: remove arch_send_call_function_ipi

Now everyone is converted to arch_send_call_function_ipi_mask, remove
the shim and the #defines.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/alpha/include/asm/smp.h    | 1 -
 arch/arm/include/asm/smp.h      | 1 -
 arch/ia64/include/asm/smp.h     | 1 -
 arch/m32r/include/asm/smp.h     | 1 -
 arch/mips/include/asm/smp.h     | 1 -
 arch/parisc/include/asm/smp.h   | 1 -
 arch/powerpc/include/asm/smp.h  | 1 -
 arch/s390/include/asm/smp.h     | 1 -
 arch/sh/include/asm/smp.h       | 1 -
 arch/sparc/include/asm/smp_64.h | 1 -
 arch/x86/include/asm/smp.h      | 1 -
 11 files changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/smp.h b/arch/alpha/include/asm/smp.h
index 8818a1bcdc8..3f390e8cc0b 100644
--- a/arch/alpha/include/asm/smp.h
+++ b/arch/alpha/include/asm/smp.h
@@ -48,7 +48,6 @@ extern int smp_num_cpus;
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #else /* CONFIG_SMP */
 
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index a06e735b262..e0d763be184 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -93,7 +93,6 @@ extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * show local interrupt info
diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h
index d217d1d4e05..0b3b3997dec 100644
--- a/arch/ia64/include/asm/smp.h
+++ b/arch/ia64/include/asm/smp.h
@@ -127,7 +127,6 @@ extern int is_multithreading_enabled(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #else /* CONFIG_SMP */
 
diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h
index c2be49d408a..e67ded1aab9 100644
--- a/arch/m32r/include/asm/smp.h
+++ b/arch/m32r/include/asm/smp.h
@@ -89,7 +89,6 @@ extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #endif	/* not __ASSEMBLY__ */
 
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 48c1967961a..e15f11a0931 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -79,6 +79,5 @@ extern asmlinkage void smp_call_function_interrupt(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/parisc/include/asm/smp.h b/arch/parisc/include/asm/smp.h
index 21eb45a5262..2e73623feb6 100644
--- a/arch/parisc/include/asm/smp.h
+++ b/arch/parisc/include/asm/smp.h
@@ -30,7 +30,6 @@ extern void smp_send_all_nop(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #endif /* !ASSEMBLY */
 
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 1491bfe822d..d9ea8d39c34 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -147,7 +147,6 @@ extern struct smp_ops_t *smp_ops;
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /* Definitions relative to the secondary CPU spin loop
  * and entry point. Not all of them exist on both 32 and
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 6de62189a48..a868b272c25 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -63,7 +63,6 @@ extern int smp_cpu_polarization[];
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #endif
 
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
index ca64f43abe6..53ef26ced75 100644
--- a/arch/sh/include/asm/smp.h
+++ b/arch/sh/include/asm/smp.h
@@ -44,7 +44,6 @@ void plat_send_ipi(unsigned int cpu, unsigned int message);
 
 void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 #else
 
diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h
index becb6bf353a..f49e11cd4de 100644
--- a/arch/sparc/include/asm/smp_64.h
+++ b/arch/sparc/include/asm/smp_64.h
@@ -36,7 +36,6 @@ extern int sparc64_multi_core;
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  *	General functions that each host system must provide.
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 6a84ed166ae..1e796782cd7 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -121,7 +121,6 @@ static inline void arch_send_call_function_single_ipi(int cpu)
 	smp_ops.send_call_func_single_ipi(cpu);
 }
 
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	smp_ops.send_call_func_ipi(mask);
-- 
cgit v1.2.3


From 2377afdde16a50b72e0b7ddb96d6b905f73754e2 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:47 -0600
Subject: cpumask: Use accessors for cpu_*_mask: m32r

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/m32r/kernel/smpboot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index 655ea1c47a0..e034844cfc0 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -178,7 +178,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++)
 		physid_set(phys_id, phys_cpu_present_map);
 #ifndef CONFIG_HOTPLUG_CPU
-	cpu_present_map = cpu_possible_map;
+	init_cpu_present(&cpu_possible_map);
 #endif
 
 	show_mp_info(nr_cpu);
-- 
cgit v1.2.3


From 4037ac6e2cb4e3148c25124b431eead4e704a4ff Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:47 -0600
Subject: cpumask: Use accessors for cpu_*_mask: mips

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/mips/kernel/smp-cmp.c | 2 +-
 arch/mips/kernel/smp-mt.c  | 2 +-
 arch/mips/kernel/smp.c     | 6 +++---
 arch/mips/kernel/smtc.c    | 6 +++---
 4 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index e5cf5b88fc2..cc81771b882 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -171,7 +171,7 @@ void __init cmp_smp_setup(void)
 
 	for (i = 1; i < NR_CPUS; i++) {
 		if (amon_cpu_avail(i)) {
-			cpu_set(i, cpu_possible_map);
+			set_cpu_possible(i, true);
 			__cpu_number_map[i]	= ++ncpu;
 			__cpu_logical_map[ncpu]	= i;
 		}
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 9538ca42e00..43e7cdc5ded 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -70,7 +70,7 @@ static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0,
 		write_vpe_c0_vpeconf0(tmp);
 
 		/* Record this as available CPU */
-		cpu_set(tc, cpu_possible_map);
+		set_cpu_possible(tc, true);
 		__cpu_number_map[tc]	= ++ncpu;
 		__cpu_logical_map[ncpu]	= tc;
 	}
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index df2ace9558b..4eb106c6a3e 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -183,15 +183,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	mp_ops->prepare_cpus(max_cpus);
 	set_cpu_sibling_map(0);
 #ifndef CONFIG_HOTPLUG_CPU
-	cpu_present_map = cpu_possible_map;
+	init_cpu_present(&cpu_possible_map);
 #endif
 }
 
 /* preload SMP state for boot cpu */
 void __devinit smp_prepare_boot_cpu(void)
 {
-	cpu_set(0, cpu_possible_map);
-	cpu_set(0, cpu_online_map);
+	set_cpu_possible(0, true);
+	set_cpu_online(0, true);
 	cpu_set(0, cpu_callin_map);
 }
 
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 1a466baf0ed..67153a0dc26 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -305,7 +305,7 @@ int __init smtc_build_cpu_map(int start_cpu_slot)
 	 */
 	ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
 	for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 		__cpu_number_map[i] = i;
 		__cpu_logical_map[i] = i;
 	}
@@ -525,8 +525,8 @@ void smtc_prepare_cpus(int cpus)
 	 * Pull any physically present but unused TCs out of circulation.
 	 */
 	while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
-		cpu_clear(tc, cpu_possible_map);
-		cpu_clear(tc, cpu_present_map);
+		set_cpu_possible(tc, false);
+		set_cpu_present(tc, false);
 		tc++;
 	}
 
-- 
cgit v1.2.3


From ea0f1cab6ed43121ff6f24c1bb02e88a8d11a2d6 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:48 -0600
Subject: cpumask: Use accessors for cpu_*_mask: powerpc

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/powerpc/kernel/setup-common.c           | 6 +++---
 arch/powerpc/kernel/smp.c                    | 8 ++++----
 arch/powerpc/platforms/powermac/smp.c        | 6 +++---
 arch/powerpc/platforms/pseries/hotplug-cpu.c | 6 +++---
 4 files changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1d5570a1e45..9837d9153c4 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -432,9 +432,9 @@ void __init smp_setup_cpu_maps(void)
 		for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
 			DBG("    thread %d -> cpu %d (hard id %d)\n",
 			    j, cpu, intserv[j]);
-			cpu_set(cpu, cpu_present_map);
+			set_cpu_present(cpu, true);
 			set_hard_smp_processor_id(cpu, intserv[j]);
-			cpu_set(cpu, cpu_possible_map);
+			set_cpu_possible(cpu, true);
 			cpu++;
 		}
 	}
@@ -480,7 +480,7 @@ void __init smp_setup_cpu_maps(void)
 			       maxcpus);
 
 		for (cpu = 0; cpu < maxcpus; cpu++)
-			cpu_set(cpu, cpu_possible_map);
+			set_cpu_possible(cpu, true);
 	out:
 		of_node_put(dn);
 	}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 7f68ceb3bdb..9b86a74d281 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -287,7 +287,7 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
-	cpu_set(boot_cpuid, cpu_online_map);
+	set_cpu_online(boot_cpuid, true);
 	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
 	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
@@ -307,7 +307,7 @@ int generic_cpu_disable(void)
 	if (cpu == boot_cpuid)
 		return -EBUSY;
 
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 #ifdef CONFIG_PPC64
 	vdso_data->processorCount--;
 	fixup_irqs(cpu_online_map);
@@ -361,7 +361,7 @@ void generic_mach_cpu_die(void)
 	smp_wmb();
 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
 		cpu_relax();
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 	local_irq_enable();
 }
 #endif
@@ -508,7 +508,7 @@ int __devinit start_secondary(void *unused)
 
 	ipi_call_lock();
 	notify_cpu_starting(cpu);
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 	/* Update sibling maps */
 	base = cpu_first_thread_in_core(cpu);
 	for (i = 0; i < threads_per_core; i++) {
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 937a38e7317..b40c22d697f 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -320,7 +320,7 @@ static int __init smp_psurge_probe(void)
 	if (ncpus > NR_CPUS)
 		ncpus = NR_CPUS;
 	for (i = 1; i < ncpus ; ++i)
-		cpu_set(i, cpu_present_map);
+		set_cpu_present(i, true);
 
 	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
 
@@ -867,7 +867,7 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
 
 int smp_core99_cpu_disable(void)
 {
-	cpu_clear(smp_processor_id(), cpu_online_map);
+	set_cpu_online(smp_processor_id(), false);
 
 	/* XXX reset cpu affinity here */
 	mpic_cpu_set_priority(0xf);
@@ -952,7 +952,7 @@ void __init pmac_setup_smp(void)
 		int cpu;
 
 		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
-			cpu_set(cpu, cpu_possible_map);
+			set_cpu_possible(cpu, true);
 		smp_ops = &psurge_smp_ops;
 	}
 #endif /* CONFIG_PPC32 */
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index a20ead87153..ebff6d9a4e3 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -94,7 +94,7 @@ static int pseries_cpu_disable(void)
 {
 	int cpu = smp_processor_id();
 
-	cpu_clear(cpu, cpu_online_map);
+	set_cpu_online(cpu, false);
 	vdso_data->processorCount--;
 
 	/*fix boot_cpuid here*/
@@ -185,7 +185,7 @@ static int pseries_add_processor(struct device_node *np)
 
 	for_each_cpu_mask(cpu, tmp) {
 		BUG_ON(cpu_isset(cpu, cpu_present_map));
-		cpu_set(cpu, cpu_present_map);
+		set_cpu_present(cpu, true);
 		set_hard_smp_processor_id(cpu, *intserv++);
 	}
 	err = 0;
@@ -217,7 +217,7 @@ static void pseries_remove_processor(struct device_node *np)
 			if (get_hard_smp_processor_id(cpu) != intserv[i])
 				continue;
 			BUG_ON(cpu_online(cpu));
-			cpu_clear(cpu, cpu_present_map);
+			set_cpu_present(cpu, false);
 			set_hard_smp_processor_id(cpu, -1);
 			break;
 		}
-- 
cgit v1.2.3


From a6a01063de6298c60f2506dc7659403e02b4b224 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:48 -0600
Subject: cpumask: Use accessors for cpu_*_mask: um

Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
---
 arch/um/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c
index 98351c78bc8..106bf27e2a9 100644
--- a/arch/um/kernel/smp.c
+++ b/arch/um/kernel/smp.c
@@ -111,7 +111,7 @@ void smp_prepare_cpus(unsigned int maxcpus)
 	int i;
 
 	for (i = 0; i < ncpus; ++i)
-		cpu_set(i, cpu_possible_map);
+		set_cpu_possible(i, true);
 
 	cpu_clear(me, cpu_online_map);
 	cpu_set(me, cpu_online_map);
-- 
cgit v1.2.3


From 56f8ba83a52b9f9e3711eff8e54168ac14aa288f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:49 -0600
Subject: cpumask: use mm_cpumask() wrapper: arm

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/arm/include/asm/cacheflush.h  |  8 ++++----
 arch/arm/include/asm/mmu_context.h |  7 ++++---
 arch/arm/include/asm/tlbflush.h    |  4 ++--
 arch/arm/kernel/smp.c              | 10 +++++-----
 arch/arm/mm/context.c              |  2 +-
 arch/arm/mm/flush.c                | 10 +++++-----
 6 files changed, 21 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 1a711ea8418..fd03fb63a33 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -334,14 +334,14 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 #ifndef CONFIG_CPU_CACHE_VIPT
 static inline void flush_cache_mm(struct mm_struct *mm)
 {
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 		__cpuc_flush_user_all();
 }
 
 static inline void
 flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
 					vma->vm_flags);
 }
@@ -349,7 +349,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long
 static inline void
 flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
 		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
 	}
@@ -360,7 +360,7 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long uaddr, void *kaddr,
 			 unsigned long len, int write)
 {
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = (unsigned long)kaddr;
 		__cpuc_coherent_kern_range(addr, addr + len);
 	}
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index bcdb9291ef0..de6cefb329d 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -103,14 +103,15 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 
 #ifdef CONFIG_SMP
 	/* check for possible thread migration */
-	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+	if (!cpumask_empty(mm_cpumask(next)) &&
+	    !cpumask_test_cpu(cpu, mm_cpumask(next)))
 		__flush_icache_all();
 #endif
-	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
 		check_context(next);
 		cpu_switch_mm(next->pgd, next);
 		if (cache_is_vivt())
-			cpu_clear(cpu, prev->cpu_vm_mask);
+			cpumask_clear_cpu(cpu, mm_cpumask(prev));
 	}
 #endif
 }
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index c964f3fc3bc..a45ab5dd825 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
 		if (tlb_flag(TLB_V3_FULL))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
 		if (tlb_flag(TLB_V4_U_FULL))
@@ -388,7 +388,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		if (tlb_flag(TLB_V3_PAGE))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
 		if (tlb_flag(TLB_V4_U_PAGE))
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index de885fd256c..e0d32770bb3 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -189,7 +189,7 @@ int __cpuexit __cpu_disable(void)
 	read_lock(&tasklist_lock);
 	for_each_process(p) {
 		if (p->mm)
-			cpu_clear(cpu, p->mm->cpu_vm_mask);
+			cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
 	}
 	read_unlock(&tasklist_lock);
 
@@ -257,7 +257,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
-	cpu_set(cpu, mm->cpu_vm_mask);
+	cpumask_set_cpu(cpu, mm_cpumask(mm));
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
@@ -643,7 +643,7 @@ void flush_tlb_all(void)
 void flush_tlb_mm(struct mm_struct *mm)
 {
 	if (tlb_ops_need_broadcast())
-		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
 	else
 		local_flush_tlb_mm(mm);
 }
@@ -654,7 +654,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		struct tlb_args ta;
 		ta.ta_vma = vma;
 		ta.ta_start = uaddr;
-		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
 	} else
 		local_flush_tlb_page(vma, uaddr);
 }
@@ -677,7 +677,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 		ta.ta_vma = vma;
 		ta.ta_start = start;
 		ta.ta_end = end;
-		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
 	} else
 		local_flush_tlb_range(vma, start, end);
 }
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index fc84fcc7438..6bda76a4319 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -59,6 +59,6 @@ void __new_context(struct mm_struct *mm)
 	}
 	spin_unlock(&cpu_asid_lock);
 
-	mm->cpu_vm_mask = cpumask_of_cpu(smp_processor_id());
+	cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
 	mm->context.id = asid;
 }
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 575f3ad722e..b27942909b2 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -50,7 +50,7 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 			__cpuc_flush_user_all();
 		return;
 	}
@@ -73,7 +73,7 @@ void flush_cache_mm(struct mm_struct *mm)
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 			__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
 						vma->vm_flags);
 		return;
@@ -97,7 +97,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 			unsigned long addr = user_addr & PAGE_MASK;
 			__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
 		}
@@ -113,7 +113,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long len, int write)
 {
 	if (cache_is_vivt()) {
-		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 			unsigned long addr = (unsigned long)kaddr;
 			__cpuc_coherent_kern_range(addr, addr + len);
 		}
@@ -126,7 +126,7 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	}
 
 	/* VIPT non-aliasing cache */
-	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
+	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
 	    vma->vm_flags & VM_EXEC) {
 		unsigned long addr = (unsigned long)kaddr;
 		/* only flushing the kernel mapping on non-aliasing VIPT */
-- 
cgit v1.2.3


From 49b92050f6ce436cde7f495bbb27437bcb09e238 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:49 -0600
Subject: cpumask: use mm_cpumask() wrapper: m32r

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Hirokazu Takata <takata@linux-m32r.org> (fixes)
---
 arch/m32r/include/asm/mmu_context.h | 4 ++--
 arch/m32r/kernel/smp.c              | 8 ++++----
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/include/asm/mmu_context.h b/arch/m32r/include/asm/mmu_context.h
index 91909e5dd9d..a70a3df3363 100644
--- a/arch/m32r/include/asm/mmu_context.h
+++ b/arch/m32r/include/asm/mmu_context.h
@@ -127,7 +127,7 @@ static inline void switch_mm(struct mm_struct *prev,
 
 	if (prev != next) {
 #ifdef CONFIG_SMP
-		cpu_set(cpu, next->cpu_vm_mask);
+		cpumask_set_cpu(cpu, mm_cpumask(next));
 #endif /* CONFIG_SMP */
 		/* Set MPTB = next->pgd */
 		*(volatile unsigned long *)MPTB = (unsigned long)next->pgd;
@@ -135,7 +135,7 @@ static inline void switch_mm(struct mm_struct *prev,
 	}
 #ifdef CONFIG_SMP
 	else
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+		if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
 			activate_context(next);
 #endif /* CONFIG_SMP */
 }
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index 45c512bcd4c..1b7598e6f6e 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -264,7 +264,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm)
 	preempt_disable();
 	cpu_id = smp_processor_id();
 	mmc = &mm->context[cpu_id];
-	cpu_mask = mm->cpu_vm_mask;
+	cpu_mask = *mm_cpumask(mm);
 	cpu_clear(cpu_id, cpu_mask);
 
 	if (*mmc != NO_CONTEXT) {
@@ -273,7 +273,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm)
 		if (mm == current->mm)
 			activate_context(mm);
 		else
-			cpu_clear(cpu_id, mm->cpu_vm_mask);
+			cpumask_clear_cpu(cpu_id, mm_cpumask(mm));
 		local_irq_restore(flags);
 	}
 	if (!cpus_empty(cpu_mask))
@@ -334,7 +334,7 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 	preempt_disable();
 	cpu_id = smp_processor_id();
 	mmc = &mm->context[cpu_id];
-	cpu_mask = mm->cpu_vm_mask;
+	cpu_mask = *mm_cpumask(mm);
 	cpu_clear(cpu_id, cpu_mask);
 
 #ifdef DEBUG_SMP
@@ -469,7 +469,7 @@ void smp_invalidate_interrupt(void)
 		if (flush_mm == current->active_mm)
 			activate_context(flush_mm);
 		else
-			cpu_clear(cpu_id, flush_mm->cpu_vm_mask);
+			cpumask_clear_cpu(cpu_id, mm_cpumask(flush_mm));
 	} else {
 		unsigned long va = flush_va;
 
-- 
cgit v1.2.3


From 7ce1df49e1b1b004ff15fb0af9a02c6b1ff71f70 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:50 -0600
Subject: cpumask: use mm_cpumask() wrapper: mn10300

Makes code futureproof against the impending change to mm->cpu_vm_mask
(to be a pointer).

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Also change the actual arg name here to "mm" (which it is), not "task".

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/mn10300/include/asm/mmu_context.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h
index a9e2e34f69b..cb294c244de 100644
--- a/arch/mn10300/include/asm/mmu_context.h
+++ b/arch/mn10300/include/asm/mmu_context.h
@@ -38,13 +38,13 @@ extern unsigned long mmu_context_cache[NR_CPUS];
 #define enter_lazy_tlb(mm, tsk)	do {} while (0)
 
 #ifdef CONFIG_SMP
-#define cpu_ran_vm(cpu, task) \
-	cpu_set((cpu), (task)->cpu_vm_mask)
-#define cpu_maybe_ran_vm(cpu, task) \
-	cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#define cpu_ran_vm(cpu, mm) \
+	cpumask_set_cpu((cpu), mm_cpumask(mm))
+#define cpu_maybe_ran_vm(cpu, mm) \
+	cpumask_test_and_set_cpu((cpu), mm_cpumask(mm))
 #else
-#define cpu_ran_vm(cpu, task)		do {} while (0)
-#define cpu_maybe_ran_vm(cpu, task)	true
+#define cpu_ran_vm(cpu, mm)		do {} while (0)
+#define cpu_maybe_ran_vm(cpu, mm)	true
 #endif /* CONFIG_SMP */
 
 /*
-- 
cgit v1.2.3


From 55b8cab49dd43d227f0dd49e3524406fdc46d37b Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:50 -0600
Subject: cpumask: use mm_cpumask() wrapper: mips

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/mips/include/asm/mmu_context.h | 10 +++++-----
 arch/mips/mm/c-octeon.c             |  2 +-
 2 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h
index d3bea88d874..d9743536a62 100644
--- a/arch/mips/include/asm/mmu_context.h
+++ b/arch/mips/include/asm/mmu_context.h
@@ -178,8 +178,8 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 * Mark current->active_mm as not "active" anymore.
 	 * We don't want to mislead possible IPI tlb flush routines.
 	 */
-	cpu_clear(cpu, prev->cpu_vm_mask);
-	cpu_set(cpu, next->cpu_vm_mask);
+	cpumask_clear_cpu(cpu, mm_cpumask(prev));
+	cpumask_set_cpu(cpu, mm_cpumask(next));
 
 	local_irq_restore(flags);
 }
@@ -235,8 +235,8 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next)
 	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
 
 	/* mark mmu ownership change */
-	cpu_clear(cpu, prev->cpu_vm_mask);
-	cpu_set(cpu, next->cpu_vm_mask);
+	cpumask_clear_cpu(cpu, mm_cpumask(prev));
+	cpumask_set_cpu(cpu, mm_cpumask(next));
 
 	local_irq_restore(flags);
 }
@@ -258,7 +258,7 @@ drop_mmu_context(struct mm_struct *mm, unsigned cpu)
 
 	local_irq_save(flags);
 
-	if (cpu_isset(cpu, mm->cpu_vm_mask))  {
+	if (cpumask_test_cpu(cpu, mm_cpumask(mm)))  {
 		get_new_mmu_context(mm, cpu);
 #ifdef CONFIG_MIPS_MT_SMTC
 		/* See comments for similar code above */
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 10ab69f7183..94e05e5733c 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -79,7 +79,7 @@ static void octeon_flush_icache_all_cores(struct vm_area_struct *vma)
 	 * cores it has been used on
 	 */
 	if (vma)
-		mask = vma->vm_mm->cpu_vm_mask;
+		mask = *mm_cpumask(vma->vm_mm);
 	else
 		mask = cpu_online_map;
 	cpu_clear(cpu, mask);
-- 
cgit v1.2.3


From fa40699b975131028a61aa8e095b0b17f350da40 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:51 -0600
Subject: cpumask: use mm_cpumask() wrapper: um

Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/um/include/asm/mmu_context.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/um/include/asm/mmu_context.h b/arch/um/include/asm/mmu_context.h
index 54f42e8b010..34d813011b7 100644
--- a/arch/um/include/asm/mmu_context.h
+++ b/arch/um/include/asm/mmu_context.h
@@ -35,8 +35,8 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	unsigned cpu = smp_processor_id();
 
 	if(prev != next){
-		cpu_clear(cpu, prev->cpu_vm_mask);
-		cpu_set(cpu, next->cpu_vm_mask);
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+		cpumask_set_cpu(cpu, mm_cpumask(next));
 		if(next != &init_mm)
 			__switch_mm(&next->context.id);
 	}
-- 
cgit v1.2.3


From 78f1c4d6b027993763a5aba83873b0462d06db8f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 09:34:51 -0600
Subject: cpumask: use mm_cpumask() wrapper: x86

Makes code futureproof against the impending change to mm->cpu_vm_mask (to be a pointer).

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/include/asm/mmu_context.h |  6 +++---
 arch/x86/kernel/ldt.c              |  4 ++--
 arch/x86/mm/tlb.c                  | 15 ++++++++-------
 arch/x86/xen/mmu.c                 |  4 ++--
 4 files changed, 15 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index f923203dc39..4a2d4e0c18d 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -37,12 +37,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 
 	if (likely(prev != next)) {
 		/* stop flush ipis for the previous mm */
-		cpu_clear(cpu, prev->cpu_vm_mask);
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
 #ifdef CONFIG_SMP
 		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
 		percpu_write(cpu_tlbstate.active_mm, next);
 #endif
-		cpu_set(cpu, next->cpu_vm_mask);
+		cpumask_set_cpu(cpu, mm_cpumask(next));
 
 		/* Re-load page tables */
 		load_cr3(next->pgd);
@@ -58,7 +58,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
 		BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
 
-		if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+		if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next))) {
 			/* We were in lazy tlb mode and leave_mm disabled
 			 * tlb flush IPI delivery. We must reload CR3
 			 * to make sure to use no freed page tables.
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 71f1d99a635..ec6ef60cbd1 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -67,8 +67,8 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 #ifdef CONFIG_SMP
 		preempt_disable();
 		load_LDT(pc);
-		if (!cpus_equal(current->mm->cpu_vm_mask,
-				cpumask_of_cpu(smp_processor_id())))
+		if (!cpumask_equal(mm_cpumask(current->mm),
+				   cpumask_of(smp_processor_id())))
 			smp_call_function(flush_ldt, current->mm, 1);
 		preempt_enable();
 #else
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index c814e144a3f..36fe08eeb5c 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -59,7 +59,8 @@ void leave_mm(int cpu)
 {
 	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
 		BUG();
-	cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
+	cpumask_clear_cpu(cpu,
+			  mm_cpumask(percpu_read(cpu_tlbstate.active_mm)));
 	load_cr3(swapper_pg_dir);
 }
 EXPORT_SYMBOL_GPL(leave_mm);
@@ -234,8 +235,8 @@ void flush_tlb_current_task(void)
 	preempt_disable();
 
 	local_flush_tlb();
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(mm_cpumask(mm), mm, TLB_FLUSH_ALL);
 	preempt_enable();
 }
 
@@ -249,8 +250,8 @@ void flush_tlb_mm(struct mm_struct *mm)
 		else
 			leave_mm(smp_processor_id());
 	}
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(mm_cpumask(mm), mm, TLB_FLUSH_ALL);
 
 	preempt_enable();
 }
@@ -268,8 +269,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 			leave_mm(smp_processor_id());
 	}
 
-	if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
-		flush_tlb_others(&mm->cpu_vm_mask, mm, va);
+	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+		flush_tlb_others(mm_cpumask(mm), mm, va);
 
 	preempt_enable();
 }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 093dd59b538..3bf7b1d250c 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1165,14 +1165,14 @@ static void xen_drop_mm_ref(struct mm_struct *mm)
 	/* Get the "official" set of cpus referring to our pagetable. */
 	if (!alloc_cpumask_var(&mask, GFP_ATOMIC)) {
 		for_each_online_cpu(cpu) {
-			if (!cpumask_test_cpu(cpu, &mm->cpu_vm_mask)
+			if (!cpumask_test_cpu(cpu, mm_cpumask(mm))
 			    && per_cpu(xen_current_cr3, cpu) != __pa(mm->pgd))
 				continue;
 			smp_call_function_single(cpu, drop_other_mm_ref, mm, 1);
 		}
 		return;
 	}
-	cpumask_copy(mask, &mm->cpu_vm_mask);
+	cpumask_copy(mask, mm_cpumask(mm));
 
 	/* It's possible that a vcpu may have a stale reference to our
 	   cr3, because its in lazy mode, and it hasn't yet flushed
-- 
cgit v1.2.3


From 2bcd57ab61e7cabed626226a3771617981c11ce1 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 24 Sep 2009 04:22:25 +0400
Subject: headers: utsname.h redux

* remove asm/atomic.h inclusion from linux/utsname.h --
   not needed after kref conversion
 * remove linux/utsname.h inclusion from files which do not need it

NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/process.c             | 1 -
 arch/arm/kernel/sys_arm.c               | 1 -
 arch/frv/kernel/sys_frv.c               | 1 -
 arch/h8300/kernel/sys_h8300.c           | 1 -
 arch/m68k/kernel/sys_m68k.c             | 1 -
 arch/m68knommu/kernel/sys_m68k.c        | 1 -
 arch/microblaze/kernel/sys_microblaze.c | 1 -
 arch/mn10300/kernel/sys_mn10300.c       | 1 -
 arch/parisc/kernel/sys_parisc32.c       | 1 -
 arch/powerpc/kernel/setup-common.c      | 1 -
 arch/powerpc/kernel/sys_ppc32.c         | 1 -
 arch/s390/kernel/compat_linux.c         | 1 -
 arch/s390/kernel/process.c              | 1 -
 arch/sh/kernel/sys_sh32.c               | 1 -
 arch/sh/kernel/sys_sh64.c               | 1 -
 arch/sparc/kernel/sys_sparc32.c         | 1 -
 arch/sparc/kernel/systbls.h             | 3 ++-
 arch/x86/kernel/dumpstack_32.c          | 1 -
 arch/x86/kernel/dumpstack_64.c          | 1 -
 arch/x86/kernel/traps.c                 | 1 -
 20 files changed, 2 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 3a2fb7a02db..289039bb6bb 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -19,7 +19,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/utsname.h>
 #include <linux/time.h>
 #include <linux/major.h>
 #include <linux/stat.h>
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index b3ec641b5cf..78ecaac6520 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -25,7 +25,6 @@
 #include <linux/mman.h>
 #include <linux/fs.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 
diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c
index baadc97f862..2b6b5289cdc 100644
--- a/arch/frv/kernel/sys_frv.c
+++ b/arch/frv/kernel/sys_frv.c
@@ -21,7 +21,6 @@
 #include <linux/stat.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/syscalls.h>
 #include <linux/ipc.h>
 
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index 2745656dcc5..8cb5d73a0e3 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -17,7 +17,6 @@
 #include <linux/syscalls.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/fs.h>
 #include <linux/ipc.h>
 
diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c
index 7f54efaf60b..7deb402bfc7 100644
--- a/arch/m68k/kernel/sys_m68k.c
+++ b/arch/m68k/kernel/sys_m68k.c
@@ -20,7 +20,6 @@
 #include <linux/syscalls.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/ipc.h>
 
 #include <asm/setup.h>
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 70028163862..efdd090778a 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -17,7 +17,6 @@
 #include <linux/syscalls.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/ipc.h>
 #include <linux/fs.h>
 
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index b96f1682bb2..07cabed4b94 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -23,7 +23,6 @@
 #include <linux/mman.h>
 #include <linux/sys.h>
 #include <linux/ipc.h>
-#include <linux/utsname.h>
 #include <linux/file.h>
 #include <linux/module.h>
 #include <linux/err.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index 3e52a105432..8ca5af00334 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -19,7 +19,6 @@
 #include <linux/stat.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/tty.h>
 
 #include <asm/uaccess.h>
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 92a0acaa0d1..561388b17c9 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -18,7 +18,6 @@
 #include <linux/signal.h>
 #include <linux/resource.h>
 #include <linux/times.h>
-#include <linux/utsname.h>
 #include <linux/time.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1d5570a1e45..74cd1a7d0d4 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -24,7 +24,6 @@
 #include <linux/seq_file.h>
 #include <linux/ioport.h>
 #include <linux/console.h>
-#include <linux/utsname.h>
 #include <linux/screen_info.h>
 #include <linux/root_dev.h>
 #include <linux/notifier.h>
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 1cc5e9e5da9..b97c2d67f4a 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -22,7 +22,6 @@
 #include <linux/signal.h>
 #include <linux/resource.h>
 #include <linux/times.h>
-#include <linux/utsname.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/sem.h>
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 5519cb74510..0debcec23a3 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -24,7 +24,6 @@
 #include <linux/signal.h>
 #include <linux/resource.h>
 #include <linux/times.h>
-#include <linux/utsname.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/sem.h>
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 59fe6ecc6ed..5417eb57271 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/notifier.h>
-#include <linux/utsname.h>
 #include <linux/tick.h>
 #include <linux/elfcore.h>
 #include <linux/kernel_stat.h>
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index 63ba12836ea..eb68bfdd86e 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -9,7 +9,6 @@
 #include <linux/syscalls.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/ipc.h>
diff --git a/arch/sh/kernel/sys_sh64.c b/arch/sh/kernel/sys_sh64.c
index 91fb8445a5a..287235768bc 100644
--- a/arch/sh/kernel/sys_sh64.c
+++ b/arch/sh/kernel/sys_sh64.c
@@ -23,7 +23,6 @@
 #include <linux/stat.h>
 #include <linux/mman.h>
 #include <linux/file.h>
-#include <linux/utsname.h>
 #include <linux/syscalls.h>
 #include <linux/ipc.h>
 #include <asm/uaccess.h>
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index f5000a460c0..04e28b2671c 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -16,7 +16,6 @@
 #include <linux/signal.h>
 #include <linux/resource.h>
 #include <linux/times.h>
-#include <linux/utsname.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/sem.h>
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index 15c2d752b2b..a63c5d2d984 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -3,10 +3,11 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/utsname.h>
 #include <asm/utrap.h>
 #include <asm/signal.h>
 
+struct new_utsname;
+
 extern asmlinkage unsigned long sys_getpagesize(void);
 extern asmlinkage unsigned long sparc_brk(unsigned long brk);
 extern asmlinkage long sparc_pipe(struct pt_regs *regs);
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index bca5fba91c9..f7dd2a7c3bf 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -5,7 +5,6 @@
 #include <linux/kallsyms.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
-#include <linux/utsname.h>
 #include <linux/hardirq.h>
 #include <linux/kdebug.h>
 #include <linux/module.h>
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 54b0a327676..a071e6be177 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -5,7 +5,6 @@
 #include <linux/kallsyms.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
-#include <linux/utsname.h>
 #include <linux/hardirq.h>
 #include <linux/kdebug.h>
 #include <linux/module.h>
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 9346e102338..a665c71352b 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -14,7 +14,6 @@
 #include <linux/spinlock.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
-#include <linux/utsname.h>
 #include <linux/kdebug.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-- 
cgit v1.2.3


From 0f3372741f2de8dc85a60be737b519a47b395b85 Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Wed, 9 Sep 2009 05:02:24 +0000
Subject: powerpc: kmalloc failure ignored in vio_build_iommu_table()

Prevent NULL dereference if kmalloc() fails.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vio.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index bc7b41edbdf..1b4f674ad7c 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1054,6 +1054,8 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 		return NULL;
 
 	tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
+	if (tbl == NULL)
+		return NULL;
 
 	of_parse_dma_window(dev->dev.archdata.of_node, dma_window,
 			    &tbl->it_index, &offset, &size);
-- 
cgit v1.2.3


From ad08587e5df17e192a57437bfedaba125998de25 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sat, 12 Sep 2009 16:08:08 +0000
Subject: powerpc/pmc: Don't access lppaca on Book3E

It doesn't exist !

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pmc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index ccc68b50d05..5a9ede4962c 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -29,7 +29,7 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq);
 void release_pmc_hardware(void);
 void ppc_enable_pmcs(void);
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #include <asm/lppaca.h>
 
 static inline void ppc_set_pmu_inuse(int inuse)
-- 
cgit v1.2.3


From 144ef909c09b60c97b3c20b69ea30abd1e60e54d Mon Sep 17 00:00:00 2001
From: Tony Breeds <tony@bakeyournoodle.com>
Date: Mon, 14 Sep 2009 19:57:02 +0000
Subject: powerpc: Check for unsupported relocs when using CONFIG_RELOCATABLE

When using CONFIG_RELOCATABLE, we build the kernel as a position
independent executable. The kernel then uses a little bit of relocation
code to relocate itself. That code only deals with R_PPC64_RELATIVE
relocations though. If for some reason you use assembly constructs
such as LOAD_REG_IMMEDIATE() to load the address of a symbol, you'll
generate different kinds of relocations that won't be processed properly
and bad things will happen. (We have 2 such bugs today).

The perl script tries to filter out "known" bad ones. It's possible
that we are missing some in the case of a weak function that nobody
implements, we'll see if we get false positive and fix it.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Makefile        | 11 +++++++++
 arch/powerpc/relocs_check.pl | 56 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 67 insertions(+)
 create mode 100755 arch/powerpc/relocs_check.pl

(limited to 'arch')

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index aacf629c1a9..1a54a3b3a3f 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -164,6 +164,17 @@ PHONY += $(BOOT_TARGETS)
 
 boot := arch/$(ARCH)/boot
 
+ifeq ($(CONFIG_RELOCATABLE),y)
+quiet_cmd_relocs_check = CALL    $<
+      cmd_relocs_check = perl $< "$(OBJDUMP)" "$(obj)/vmlinux"
+
+PHONY += relocs_check
+relocs_check: arch/powerpc/relocs_check.pl vmlinux
+	$(call cmd,relocs_check)
+
+zImage: relocs_check
+endif
+
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
diff --git a/arch/powerpc/relocs_check.pl b/arch/powerpc/relocs_check.pl
new file mode 100755
index 00000000000..d2571096c3e
--- /dev/null
+++ b/arch/powerpc/relocs_check.pl
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+
+# Copyright © 2009 IBM Corporation
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+
+# This script checks the relcoations of a vmlinux for "suspicious"
+# relocations.
+
+use strict;
+use warnings;
+
+if ($#ARGV != 1) {
+	die "$0 [path to objdump] [path to vmlinux]\n";
+}
+
+# Have Kbuild supply the path to objdump so we handle cross compilation.
+my $objdump = shift;
+my $vmlinux = shift;
+my $bad_relocs_count = 0;
+my $bad_relocs = "";
+my $old_binutils = 0;
+
+open(FD, "$objdump -R $vmlinux|") or die;
+while (<FD>) {
+	study $_;
+
+	# Only look at relcoation lines.
+	next if (!/\s+R_/);
+
+	# These relocations are okay
+	next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
+	         /R_PPC64_ADDR64\s+mach_/);
+
+	# If we see this type of relcoation it's an idication that
+	# we /may/ be using an old version of binutils.
+	if (/R_PPC64_UADDR64/) {
+		$old_binutils++;
+	}
+
+	$bad_relocs_count++;
+	$bad_relocs .= $_;
+}
+
+if ($bad_relocs_count) {
+	print "WARNING: $bad_relocs_count bad relocations\n";
+	print $bad_relocs;
+}
+
+if ($old_binutils) {
+	print "WARNING: You need at binutils >= 2.19 to build a ".
+	      "CONFIG_RELCOATABLE kernel\n";
+}
-- 
cgit v1.2.3


From 5c8f382c0b96aedcd709c05eae13bd684e16417e Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Wed, 16 Sep 2009 03:08:58 +0000
Subject: powerpc/book3e-64: Remove duplicated #include

Remove duplicated #include('s) in
  arch/powerpc/kernel/exceptions-64e.S

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/exceptions-64e.S | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 9048f96237f..24dcc0ecf24 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -17,7 +17,6 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/thread_info.h>
-#include <asm/reg.h>
 #include <asm/exception-64e.h>
 #include <asm/bug.h>
 #include <asm/irqflags.h>
-- 
cgit v1.2.3


From b9eceb2307f8dda124669a9dc213aad8c1569b5a Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Wed, 16 Sep 2009 03:09:22 +0000
Subject: powerpc/mm: Remove duplicated #include

Remove duplicated #include('s) in
  arch/powerpc/mm/tlb_low_64e.S

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/tlb_low_64e.S | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index ef1cccf7117..f288279e679 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -18,7 +18,6 @@
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
 #include <asm/pgtable.h>
-#include <asm/reg.h>
 #include <asm/exception-64e.h>
 #include <asm/ppc-opcode.h>
 
-- 
cgit v1.2.3


From 1cebd7a0f62804ca24f7b7b35e8105000b9e879a Mon Sep 17 00:00:00 2001
From: Becky Bruce <beckyb@kernel.crashing.org>
Date: Mon, 21 Sep 2009 08:26:34 +0000
Subject: powerpc: Rename get_dma_direct_offset get_dma_offset

The former is no longer really accurate with the swiotlb case now
a possibility.  I also move it into dma-mapping.h - it no longer
needs to be in dma.c, and there are about to be some more accessors
that should all end up in the same place.  A comment is added to
indicate that this function is not used in configs where there is no
simple dma offset, such as the iommu case.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h | 21 ++++++++++++++++++---
 arch/powerpc/kernel/dma.c              | 15 ++++-----------
 2 files changed, 22 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index cb2ca41dd52..34b919fe8cd 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -26,7 +26,6 @@ extern void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 extern void dma_direct_free_coherent(struct device *dev, size_t size,
 				     void *vaddr, dma_addr_t dma_handle);
 
-extern unsigned long get_dma_direct_offset(struct device *dev);
 
 #ifdef CONFIG_NOT_COHERENT_CACHE
 /*
@@ -90,6 +89,22 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 	dev->archdata.dma_ops = ops;
 }
 
+/*
+ * get_dma_offset()
+ *
+ * Get the dma offset on configurations where the dma address can be determined
+ * from the physical address by looking at a simple offset.  Direct dma and
+ * swiotlb use this function, but it is typically not used by implementations
+ * with an iommu.
+ */
+static inline unsigned long get_dma_offset(struct device *dev)
+{
+	if (dev)
+		return (unsigned long)dev->archdata.dma_data;
+
+	return PCI_DRAM_OFFSET;
+}
+
 /* this will be removed soon */
 #define flush_write_buffers()
 
@@ -181,12 +196,12 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	return paddr + get_dma_direct_offset(dev);
+	return paddr + get_dma_offset(dev);
 }
 
 static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	return daddr - get_dma_direct_offset(dev);
+	return daddr - get_dma_offset(dev);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 21b784d7e7d..6215062caf8 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -21,13 +21,6 @@
  * default the offset is PCI_DRAM_OFFSET.
  */
 
-unsigned long get_dma_direct_offset(struct device *dev)
-{
-	if (dev)
-		return (unsigned long)dev->archdata.dma_data;
-
-	return PCI_DRAM_OFFSET;
-}
 
 void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, gfp_t flag)
@@ -37,7 +30,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
 	if (ret == NULL)
 		return NULL;
-	*dma_handle += get_dma_direct_offset(dev);
+	*dma_handle += get_dma_offset(dev);
 	return ret;
 #else
 	struct page *page;
@@ -51,7 +44,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 		return NULL;
 	ret = page_address(page);
 	memset(ret, 0, size);
-	*dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
+	*dma_handle = virt_to_abs(ret) + get_dma_offset(dev);
 
 	return ret;
 #endif
@@ -75,7 +68,7 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	int i;
 
 	for_each_sg(sgl, sg, nents, i) {
-		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+		sg->dma_address = sg_phys(sg) + get_dma_offset(dev);
 		sg->dma_length = sg->length;
 		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 	}
@@ -110,7 +103,7 @@ static inline dma_addr_t dma_direct_map_page(struct device *dev,
 {
 	BUG_ON(dir == DMA_NONE);
 	__dma_sync_page(page, offset, size, dir);
-	return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+	return page_to_phys(page) + offset + get_dma_offset(dev);
 }
 
 static inline void dma_direct_unmap_page(struct device *dev,
-- 
cgit v1.2.3


From 738ef42e32fe95553a424c04016b936c9f6c9afb Mon Sep 17 00:00:00 2001
From: Becky Bruce <beckyb@kernel.crashing.org>
Date: Mon, 21 Sep 2009 08:26:35 +0000
Subject: powerpc: Change archdata dma_data to a union

Sometimes this is used to hold a simple offset, and sometimes
it is used to hold a pointer.  This patch changes it to a union containing
void * and dma_addr_t.  get/set accessors are also provided, because it was
getting a bit ugly to get to the actual data.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/device.h        | 11 ++++++++++-
 arch/powerpc/include/asm/dma-mapping.h   | 10 ++++++++--
 arch/powerpc/include/asm/iommu.h         | 10 ++++++++++
 arch/powerpc/kernel/dma-iommu.c          | 16 ++++++++--------
 arch/powerpc/kernel/pci-common.c         |  2 +-
 arch/powerpc/kernel/vio.c                |  2 +-
 arch/powerpc/platforms/cell/beat_iommu.c |  2 +-
 arch/powerpc/platforms/cell/iommu.c      |  9 +++------
 arch/powerpc/platforms/iseries/iommu.c   |  2 +-
 arch/powerpc/platforms/pasemi/iommu.c    |  2 +-
 arch/powerpc/platforms/pseries/iommu.c   |  8 ++++----
 arch/powerpc/sysdev/dart_iommu.c         |  2 +-
 12 files changed, 49 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 9dade15d1ab..6d94d27ed85 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -15,7 +15,16 @@ struct dev_archdata {
 
 	/* DMA operations on that device */
 	struct dma_map_ops	*dma_ops;
-	void			*dma_data;
+
+	/*
+	 * When an iommu is in use, dma_data is used as a ptr to the base of the
+	 * iommu_table.  Otherwise, it is a simple numerical offset.
+	 */
+	union {
+		dma_addr_t	dma_offset;
+		void		*iommu_table_base;
+	} dma_data;
+
 #ifdef CONFIG_SWIOTLB
 	dma_addr_t		max_direct_dma_addr;
 #endif
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 34b919fe8cd..e281daebddc 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -97,14 +97,20 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
  * swiotlb use this function, but it is typically not used by implementations
  * with an iommu.
  */
-static inline unsigned long get_dma_offset(struct device *dev)
+static inline dma_addr_t get_dma_offset(struct device *dev)
 {
 	if (dev)
-		return (unsigned long)dev->archdata.dma_data;
+		return dev->archdata.dma_data.dma_offset;
 
 	return PCI_DRAM_OFFSET;
 }
 
+static inline void set_dma_offset(struct device *dev, dma_addr_t off)
+{
+	if (dev)
+		dev->archdata.dma_data.dma_offset = off;
+}
+
 /* this will be removed soon */
 #define flush_write_buffers()
 
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7464c0daddd..edfc9803ec9 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -70,6 +70,16 @@ struct iommu_table {
 
 struct scatterlist;
 
+static inline void set_iommu_table_base(struct device *dev, void *base)
+{
+	dev->archdata.dma_data.iommu_table_base = base;
+}
+
+static inline void *get_iommu_table_base(struct device *dev)
+{
+	return dev->archdata.dma_data.iommu_table_base;
+}
+
 /* Frees table for an individual device node */
 extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
 
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 87ddb3fb948..37771a51811 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -18,7 +18,7 @@
 static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag)
 {
-	return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
+	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, device_to_mask(dev), flag,
 				    dev_to_node(dev));
 }
@@ -26,7 +26,7 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle)
 {
-	iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -39,8 +39,8 @@ static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
 				     enum dma_data_direction direction,
 				     struct dma_attrs *attrs)
 {
-	return iommu_map_page(dev, dev->archdata.dma_data, page, offset, size,
-			      device_to_mask(dev), direction, attrs);
+	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
+			      size, device_to_mask(dev), direction, attrs);
 }
 
 
@@ -48,7 +48,7 @@ static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
 				 size_t size, enum dma_data_direction direction,
 				 struct dma_attrs *attrs)
 {
-	iommu_unmap_page(dev->archdata.dma_data, dma_handle, size, direction,
+	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
 			 attrs);
 }
 
@@ -57,7 +57,7 @@ static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    int nelems, enum dma_data_direction direction,
 			    struct dma_attrs *attrs)
 {
-	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+	return iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 			    device_to_mask(dev), direction, attrs);
 }
 
@@ -65,14 +65,14 @@ static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction,
 		struct dma_attrs *attrs)
 {
-	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+	iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems, direction,
 		       attrs);
 }
 
 /* We support DMA to/from any memory page via the iommu */
 static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 {
-	struct iommu_table *tbl = dev->archdata.dma_data;
+	struct iommu_table *tbl = get_iommu_table_base(dev);
 
 	if (!tbl || tbl->it_offset > mask) {
 		printk(KERN_INFO
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index e9f4840096b..bb8209e3493 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1117,7 +1117,7 @@ void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
 
 		/* Hook up default DMA ops */
 		sd->dma_ops = pci_dma_ops;
-		sd->dma_data = (void *)PCI_DRAM_OFFSET;
+		set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
 
 		/* Additional platform DMA/iommu setup */
 		if (ppc_md.pci_dma_dev_setup)
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 1b4f674ad7c..77f64218abf 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1235,7 +1235,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 		vio_cmo_set_dma_ops(viodev);
 	else
 		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
-	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
+	set_iommu_table_base(&viodev->dev, vio_build_iommu_table(viodev));
 	set_dev_node(&viodev->dev, of_node_to_nid(of_node));
 
 	/* init generic 'struct device' fields: */
diff --git a/arch/powerpc/platforms/cell/beat_iommu.c b/arch/powerpc/platforms/cell/beat_iommu.c
index 93b0efddd65..39d361c5c6d 100644
--- a/arch/powerpc/platforms/cell/beat_iommu.c
+++ b/arch/powerpc/platforms/cell/beat_iommu.c
@@ -77,7 +77,7 @@ static void __init celleb_init_direct_mapping(void)
 static void celleb_dma_dev_setup(struct device *dev)
 {
 	dev->archdata.dma_ops = get_pci_dma_ops();
-	dev->archdata.dma_data = (void *)celleb_dma_direct_offset;
+	set_dma_offset(dev, celleb_dma_direct_offset);
 }
 
 static void celleb_pci_dma_dev_setup(struct pci_dev *pdev)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 416db17eb18..ca5bfdfe47f 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -657,15 +657,13 @@ static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
 {
-	struct dev_archdata *archdata = &dev->archdata;
-
 	/* Order is important here, these are not mutually exclusive */
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
 		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
-		archdata->dma_data = cell_get_iommu_table(dev);
+		set_iommu_table_base(dev, cell_get_iommu_table(dev));
 	else if (get_pci_dma_ops() == &dma_direct_ops)
-		archdata->dma_data = (void *)cell_dma_direct_offset;
+		set_dma_offset(dev, cell_dma_direct_offset);
 	else
 		BUG();
 }
@@ -973,11 +971,10 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
 
 static void cell_dma_dev_setup_fixed(struct device *dev)
 {
-	struct dev_archdata *archdata = &dev->archdata;
 	u64 addr;
 
 	addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
-	archdata->dma_data = (void *)addr;
+	set_dma_offset(dev, addr);
 
 	dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
 }
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 6c1e1011959..9d53cb481a7 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -193,7 +193,7 @@ static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
 		pdn->iommu_table = iommu_init_table(tbl, -1);
 	else
 		kfree(tbl);
-	pdev->dev.archdata.dma_data = pdn->iommu_table;
+	set_iommu_table_base(&pdev->dev, pdn->iommu_table);
 }
 #else
 #define pci_dma_dev_setup_iseries	NULL
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index a0ff03a3d8d..7b1d608ea3c 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -189,7 +189,7 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
 	}
 #endif
 
-	dev->dev.archdata.dma_data = &iommu_table_iobmap;
+	set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
 }
 
 static void pci_dma_bus_setup_null(struct pci_bus *b) { }
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 661c8e02bcb..1a0000a4b6d 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -482,7 +482,7 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
 				   phb->node);
 		iommu_table_setparms(phb, dn, tbl);
 		PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
-		dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
 		return;
 	}
 
@@ -494,7 +494,7 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
 		dn = dn->parent;
 
 	if (dn && PCI_DN(dn))
-		dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
 	else
 		printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
 		       pci_name(dev));
@@ -538,7 +538,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 	 */
 	if (dma_window == NULL || pdn->parent == NULL) {
 		pr_debug("  no dma window for device, linking to parent\n");
-		dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(pdn)->iommu_table);
 		return;
 	}
 
@@ -554,7 +554,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 		pr_debug("  found DMA window, table: %p\n", pci->iommu_table);
 	}
 
-	dev->dev.archdata.dma_data = pci->iommu_table;
+	set_iommu_table_base(&dev->dev, pci->iommu_table);
 }
 #else  /* CONFIG_PCI */
 #define pci_dma_bus_setup_pSeries	NULL
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 89639ecbf38..ae3c4db86fe 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -297,7 +297,7 @@ static void pci_dma_dev_setup_dart(struct pci_dev *dev)
 	/* We only have one iommu table on the mac for now, which makes
 	 * things simple. Setup all PCI devices to point to this table
 	 */
-	dev->dev.archdata.dma_data = &iommu_table_dart;
+	set_iommu_table_base(&dev->dev, &iommu_table_dart);
 }
 
 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
-- 
cgit v1.2.3


From 8bbde7a7062facf8af35bcc9a64cbafe8f36f3cf Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 21 Sep 2009 16:52:35 +0000
Subject: powerpc: Move 64bit heap above 1TB on machines with 1TB segments

If we are using 1TB segments and we are allowed to randomise the heap, we can
put it above 1TB so it is backed by a 1TB segment. Otherwise the heap will be
in the bottom 1TB which always uses 256MB segments and this may result in a
performance penalty.

This functionality is disabled when heap randomisation is turned off:

echo 1 > /proc/sys/kernel/randomize_va_space

which may be useful when trying to allocate the maximum amount of 16M or 16G
pages.

On a microbenchmark that repeatedly touches 32GB of memory with a stride of
256MB + 4kB (designed to stress 256MB segments while still mapping nicely into
the L1 cache), we see the improvement:

Force malloc to use heap all the time:
# export MALLOC_MMAP_MAX_=0 MALLOC_TRIM_THRESHOLD_=-1

Disable heap randomization:
# echo 1 > /proc/sys/kernel/randomize_va_space
# time ./test
12.51s

Enable heap randomization:
# echo 2 > /proc/sys/kernel/randomize_va_space
# time ./test
1.70s

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/process.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 0a321643305..1168c5f440a 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1165,7 +1165,22 @@ static inline unsigned long brk_rnd(void)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long ret = PAGE_ALIGN(mm->brk + brk_rnd());
+	unsigned long base = mm->brk;
+	unsigned long ret;
+
+#ifdef CONFIG_PPC64
+	/*
+	 * If we are using 1TB segments and we are allowed to randomise
+	 * the heap, we can put it above 1TB so it is backed by a 1TB
+	 * segment. Otherwise the heap will be in the bottom 1TB
+	 * which always uses 256MB segments and this may result in a
+	 * performance penalty.
+	 */
+	if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T))
+		base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T);
+#endif
+
+	ret = PAGE_ALIGN(base + brk_rnd());
 
 	if (ret < mm->brk)
 		return mm->brk;
-- 
cgit v1.2.3


From f2053f1a7bf6005b4e81826b1ac8d0b4117c4cf0 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 21 Sep 2009 16:57:40 +0000
Subject: powerpc/perf_counter: Fix vdso detection

perf_counter uses arch_vma_name() to detect a vdso region which in turn uses
current->mm->context.vdso_base. We need to initialise this before doing
the mmap or else we fail to detect the vdso.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vdso.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 3faaf29bdb2..94e2df3cae0 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -240,6 +240,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 		goto fail_mmapsem;
 	}
 
+	/*
+	 * Put vDSO base into mm struct. We need to do this before calling
+	 * install_special_mapping or the perf counter mmap tracking code
+	 * will fail to recognise it as a vDSO (since arch_vma_name fails).
+	 */
+	current->mm->context.vdso_base = vdso_base;
+
 	/*
 	 * our vma flags don't have VM_WRITE so by default, the process isn't
 	 * allowed to write those pages.
@@ -260,11 +267,10 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 				     VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
 				     VM_ALWAYSDUMP,
 				     vdso_pagelist);
-	if (rc)
+	if (rc) {
+		current->mm->context.vdso_base = 0;
 		goto fail_mmapsem;
-
-	/* Put vDSO base into mm struct */
-	current->mm->context.vdso_base = vdso_base;
+	}
 
 	up_write(&mm->mmap_sem);
 	return 0;
-- 
cgit v1.2.3


From ea55bf29126f0066a4e82a8545437494ff4fc431 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 21 Sep 2009 19:56:43 +0000
Subject: powerpc: Increase NODES_SHIFT on 64bit from 4 to 8

Some System p configurations can already have more than 16 nodes so we
need to increase NODES_SHIFT. I chose 256 to give us some room to grow in the
future, although we can look at something smaller if the memory bloat is
considered too much.

Unless we clamp MAX_ACTIVE_REGIONS we end up with 300kB of extra bloat in
early_node_map in mm/page_alloc.c:

< 6144   early_node_map
> 307200 early_node_map

due to:

    #if MAX_NUMNODES >= 32
      /* If there can be many nodes, allow up to 50 holes per node */
      #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
    #else
      /* By default, allow up to 256 distinct regions */
    #define MAX_ACTIVE_REGIONS 256

Since our memory is mostly contiguous it seems reasonable to keep this
at 256 for now. I also set 32bit to 32 to save space (is there any chance
a 32bit system will have more than 32 discontiguous memory ranges?).

Even with that fixed we have a few data structures that grow:

< 896   bootmem_node_data
> 14336 bootmem_node_data

< 1280  node_devices
> 20480 node_devices

< 25088 kmalloc_caches
> 59648 kmalloc_caches

< 1632  hstates
> 21792 hstates

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4fd479059d6..10a0a5488a4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -385,9 +385,15 @@ config NUMA
 
 config NODES_SHIFT
 	int
+	default "8" if PPC64
 	default "4"
 	depends on NEED_MULTIPLE_NODES
 
+config MAX_ACTIVE_REGIONS
+	int
+	default "256" if PPC64
+	default "32"
+
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 	depends on PPC64
-- 
cgit v1.2.3


From 049d0497060bc8db944f7b4984271327448b3603 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 21 Sep 2009 20:47:39 +0000
Subject: powerpc: Fix ibm,client-architecture-support printout

On machines without the ibm,client-architecture-support call we were missing a
newline. We may as well print the full name in all its glory too - its
ibm,client-architecture-support, not ibm,client-architecture as I mistakenly
wrote (a name only an IBM architect could love).

For my penance I will write out ibm,client-architecture-support 100 times.

Before:

Calling ibm,client-architecture...command line: root=/dev/sda6 console=hvc0  quiet

After:

Calling ibm,client-architecture-support... not implemented
command line: root=/dev/sda6 console=hvc0

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/prom_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 864334b337a..bafac2e41ae 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -800,7 +800,7 @@ static void __init prom_send_capabilities(void)
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
 		/* try calling the ibm,client-architecture-support method */
-		prom_printf("Calling ibm,client-architecture...");
+		prom_printf("Calling ibm,client-architecture-support...");
 		if (call_prom_ret("call-method", 3, 2, &ret,
 				  ADDR("ibm,client-architecture-support"),
 				  root,
@@ -814,6 +814,7 @@ static void __init prom_send_capabilities(void)
 			return;
 		}
 		call_prom("close", 1, 0, root);
+		prom_printf(" not implemented\n");
 	}
 
 	/* no ibm,client-architecture-support call, try the old way */
-- 
cgit v1.2.3


From 142597dbbd8a1d516af3dacfa00037f21612e865 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Tue, 22 Sep 2009 05:18:09 +0000
Subject: powerpc: Cleanup linker script using new linker script macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 69 +++++++++------------------------------
 1 file changed, 15 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 58da4070723..f56429362a1 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
+#include <asm/thread_info.h>
 
 ENTRY(_stext)
 
@@ -71,12 +72,7 @@ SECTIONS
 	/* Read-only data */
 	RODATA
 
-	/* Exception & bug tables */
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(0)
 
 	NOTES :kernel :notes
 
@@ -93,12 +89,7 @@ SECTIONS
  */
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
-
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	} :kernel
+	INIT_TEXT_SECTION(PAGE_SIZE) :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -122,23 +113,16 @@ SECTIONS
 #endif
 	}
 
-	. = ALIGN(16);
 	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
+		INIT_SETUP(16)
 	}
 
 	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-		}
+		INIT_CALLS
+	}
 
 	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 
 	SECURITY_INIT
@@ -169,14 +153,10 @@ SECTIONS
 		__stop___fw_ftr_fixup = .;
 	}
 #endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
 	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
+		INIT_RAM_FS
 	}
-#endif
+
 	PERCPU(PAGE_SIZE)
 
 	. = ALIGN(8);
@@ -240,36 +220,24 @@ SECTIONS
 #endif
 
 	/* The initial task and kernel stack */
-#ifdef CONFIG_PPC32
-	. = ALIGN(8192);
-#else
-	. = ALIGN(16384);
-#endif
 	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-		*(.data.page_aligned)
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-		*(.data.cacheline_aligned)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-		*(.data.read_mostly)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
+		NOSAVE_DATA
 	}
 
 	. = ALIGN(PAGE_SIZE);
@@ -280,14 +248,7 @@ SECTIONS
  * And finally the bss
  */
 
-	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-		__bss_start = .;
-		*(.sbss) *(.scommon)
-		*(.dynbss)
-		*(.bss)
-		*(COMMON)
-		__bss_stop = .;
-	}
+	BSS_SECTION(0, 0, 0)
 
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
-- 
cgit v1.2.3


From f32af63ed1327451cb91e3816fa043b6c2c52db1 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 22 Sep 2009 18:12:26 +0000
Subject: powerpc/mm: Fix 40x and 8xx vs. _PAGE_SPECIAL

The test to check whether we have _PAGE_SPECIAL defined is broken,
since we always define it, just not always to a meaninful value :-)

That broke 8xx and 40x under some circumstances.

This fixes it by adding _PAGE_SPECIAL for both of these since they
had a free PTE bit, and removing the condition around advertising
it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pte-40x.h    | 1 +
 arch/powerpc/include/asm/pte-8xx.h    | 1 +
 arch/powerpc/include/asm/pte-common.h | 5 -----
 3 files changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
index 6c3e1f4378d..ec0b0b0d1df 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -43,6 +43,7 @@
 #define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
 #define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
 #define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_SPECIAL	0x020	/* software: Special page */
 #define	_PAGE_RW	0x040	/* software: Writes permitted */
 #define	_PAGE_DIRTY	0x080	/* software: dirty page */
 #define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index 94e979718dc..dd5ea95fe61 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -32,6 +32,7 @@
 #define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
 #define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
 #define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+#define _PAGE_SPECIAL	0x0008	/* SW entry, forced to 0 by the TLB miss */
 
 /* These five software bits must be masked out when the entry is loaded
  * into the TLB.
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index c3b65076a26..f2b370180a0 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -25,9 +25,6 @@
 #ifndef _PAGE_WRITETHRU
 #define _PAGE_WRITETHRU	0
 #endif
-#ifndef _PAGE_SPECIAL
-#define _PAGE_SPECIAL	0
-#endif
 #ifndef _PAGE_4K_PFN
 #define _PAGE_4K_PFN		0
 #endif
@@ -179,7 +176,5 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 #define HAVE_PAGE_AGP
 
 /* Advertise support for _PAGE_SPECIAL */
-#ifdef _PAGE_SPECIAL
 #define __HAVE_ARCH_PTE_SPECIAL
-#endif
 
-- 
cgit v1.2.3


From daf8f40391b2a1978ea2071c20959d91fade6b1a Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date: Wed, 23 Sep 2009 03:51:04 +0000
Subject: powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx

The xmon code relies on MSR_RI being non-zero to indicate that an exception
is recoverable.  If it is not, it prints a warning message.  However, the
PowerPC 4xx cores do not have an MSR_RI bit and this warning is produced for
every xmon event.

This introduces an unrecoverable_excp function to determine if an exception
is recoverable or not.  This gets rid of the erroneous warnings on 4xx.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/xmon/xmon.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0e09a45ac79..c6f0a71b405 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -335,6 +335,16 @@ int cpus_are_in_xmon(void)
 }
 #endif
 
+static inline int unrecoverable_excp(struct pt_regs *regs)
+{
+#ifdef CONFIG_4xx
+	/* We have no MSR_RI bit on 4xx, so we simply return false */
+	return 0;
+#else
+	return ((regs->msr & MSR_RI) == 0);
+#endif
+}
+
 static int xmon_core(struct pt_regs *regs, int fromipi)
 {
 	int cmd = 0;
@@ -388,7 +398,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 	bp = NULL;
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF))
 		bp = at_breakpoint(regs->nip);
-	if (bp || (regs->msr & MSR_RI) == 0)
+	if (bp || unrecoverable_excp(regs))
 		fromipi = 0;
 
 	if (!fromipi) {
@@ -399,7 +409,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 			       cpu, BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
-		if ((regs->msr & MSR_RI) == 0)
+		if (unrecoverable_excp(regs))
 			printf("WARNING: exception is not recoverable, "
 			       "can't continue\n");
 		release_output_lock();
@@ -490,7 +500,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 			printf("Stopped at breakpoint %x (", BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
-		if ((regs->msr & MSR_RI) == 0)
+		if (unrecoverable_excp(regs))
 			printf("WARNING: exception is not recoverable, "
 			       "can't continue\n");
 		remove_bpts();
-- 
cgit v1.2.3


From e0908085fc2391c85b85fb814ae1df377c8e0dcb Mon Sep 17 00:00:00 2001
From: Rex Feany <RFeany@mrv.com>
Date: Wed, 23 Sep 2009 14:45:52 +0000
Subject: powerpc/8xx: Fix regression introduced by cache coherency rewrite

After upgrading to the latest kernel on my mpc875 userspace started
running incredibly slow (hours to get to a shell, even!).
I tracked it down to commit 8d30c14cab30d405a05f2aaceda1e9ad57800f36,
that patch removed a work-around for the 8xx. Adding it
back makes my problem go away.

Signed-off-by: Rex Feany <rfeany@mrv.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 83f1551ec2c..53040931de3 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,8 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
+#include "mmu_decl.h"
+
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 #ifdef CONFIG_SMP
@@ -166,7 +168,7 @@ struct page * maybe_pte_to_page(pte_t pte)
  * support falls into the same category.
  */
 
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 {
 	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 	if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
@@ -175,6 +177,17 @@ static pte_t set_pte_filter(pte_t pte)
 		if (!pg)
 			return pte;
 		if (!test_bit(PG_arch_1, &pg->flags)) {
+#ifdef CONFIG_8xx
+			/* On 8xx, cache control instructions (particularly
+			 * "dcbst" from flush_dcache_icache) fault as write
+			 * operation if there is an unpopulated TLB entry
+			 * for the address in question. To workaround that,
+			 * we invalidate the TLB here, thus avoiding dcbst
+			 * misbehaviour.
+			 */
+			/* 8xx doesn't care about PID, size or ind args */
+			_tlbil_va(addr, 0, 0, 0);
+#endif /* CONFIG_8xx */
 			flush_dcache_icache_page(pg);
 			set_bit(PG_arch_1, &pg->flags);
 		}
@@ -194,7 +207,7 @@ static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
  * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
  * instead we "filter out" the exec permission for non clean pages.
  */
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 {
 	struct page *pg;
 
@@ -276,7 +289,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 	 * this context might not have been activated yet when this
 	 * is called.
 	 */
-	pte = set_pte_filter(pte);
+	pte = set_pte_filter(pte, addr);
 
 	/* Perform the setting of the PTE */
 	__set_pte_at(mm, addr, ptep, pte, 0);
-- 
cgit v1.2.3


From a6bbce200deefb78c49e159ca718df22f18e5037 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Tue, 22 Sep 2009 13:50:26 +0000
Subject: sh: includecheck fix: dwarf.c

fix the following 'make includecheck' warning:

  arch/sh/kernel/dwarf.c: asm/dwarf.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/dwarf.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index bc4d8d75332..03b3616c80a 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -24,7 +24,6 @@
 #include <asm/unwinder.h>
 #include <asm/sections.h>
 #include <asm/unaligned.h>
-#include <asm/dwarf.h>
 #include <asm/stacktrace.h>
 
 /* Reserve enough memory for two stack frames */
-- 
cgit v1.2.3


From acf3cc283f1ea4ed7e579663eefed62f0aa572da Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Thu, 24 Sep 2009 06:28:27 +0000
Subject: sh: mach-ecovec24: Add active low setting for sh_eth

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-ecovec24/setup.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 96bc1698310..5f9881e16e2 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -121,6 +121,7 @@ static struct resource sh_eth_resources[] = {
 struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.ether_link_active_low = 1
 };
 
 static struct platform_device sh_eth_device = {
-- 
cgit v1.2.3


From f05131cd7a9521031ccb1afd6234ce57ff03ae45 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 14 Sep 2009 15:15:49 +0200
Subject: microblaze: Support simpleImage.dts make target

Instead of remembering to specify DTB= on the make commandline, this commit
allows the much friendlier make simpleImage.<dts>
where <dts>.dts is expected to be found in arch/microblaze/boot/dts/
The resulting vmlinux, with the compiled DTS linked in, will be copied to
boot/simpleImage.<dts>

This mirrors the same functionality as on PowerPC,
albeit achieving it in a slightly different way.

+ strip simpleImage file
The size of output file is very similar to linux.bin.

vmlinux - full elf without fdt blob
simpleImage.<dtb name>.unstrip - full elf with fdt blob
simpleImage.<dtb name> - stripped elf with fdt blob

Add symlink to generic system.dts in platform folder

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/Makefile            | 27 ++++++++++++++++++++----
 arch/microblaze/boot/Makefile       | 41 +++++++++++++++++++++++++++++++++++--
 arch/microblaze/boot/dts/system.dts |  1 +
 arch/microblaze/boot/linked_dtb.S   |  3 +++
 4 files changed, 66 insertions(+), 6 deletions(-)
 create mode 120000 arch/microblaze/boot/dts/system.dts
 create mode 100644 arch/microblaze/boot/linked_dtb.S

(limited to 'arch')

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 737a4dc72ed..34187354304 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -53,22 +53,41 @@ core-y += arch/microblaze/platform/
 
 boot := arch/microblaze/boot
 
+# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
+DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
+
+ifneq ($(DTB),)
+	core-y	+= $(boot)/
+endif
+
 # defines filename extension depending memory management type
 ifeq ($(CONFIG_MMU),)
 MMU := -nommu
 endif
 
-export MMU
+export MMU DTB
 
 all: linux.bin
 
+BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.%
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-linux.bin linux.bin.gz: vmlinux
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 define archhelp
-  echo  '* linux.bin    - Create raw binary'
-  echo  '  linux.bin.gz - Create compressed raw binary'
+  echo '* linux.bin    - Create raw binary'
+  echo '  linux.bin.gz - Create compressed raw binary'
+  echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
+  echo '                   - stripped elf with fdt blob
+  echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
+  echo '  *_defconfig      - Select default config from arch/microblaze/configs'
+  echo ''
+  echo '  Targets with <dt> embed a device tree blob inside the image'
+  echo '  These targets support board with firmware that does not'
+  echo '  support passing a device tree directly. Replace <dt> with the'
+  echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
+  echo '  (minus the .dts extension).'
 endef
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index c2bb043a029..21f13322a4c 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -2,10 +2,24 @@
 # arch/microblaze/boot/Makefile
 #
 
-targets := linux.bin linux.bin.gz
+obj-y += linked_dtb.o
+
+targets := linux.bin linux.bin.gz simpleImage.%
 
 OBJCOPYFLAGS_linux.bin  := -O binary
 
+# Where the DTS files live
+dtstree         := $(srctree)/$(src)/dts
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+	$(call if_changed,cp)
+endif
+
 $(obj)/linux.bin: vmlinux FORCE
 	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
 	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
@@ -16,4 +30,27 @@ $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
 	$(call if_changed,gzip)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
-clean-kernel += linux.bin linux.bin.gz
+quiet_cmd_cp = CP      $< $@$2
+	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+quiet_cmd_strip = STRIP   $@
+      cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@
+
+$(obj)/simpleImage.%: vmlinux FORCE
+	$(call if_changed,cp,.unstrip)
+	$(call if_changed,strip)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+# Rule to build device tree blobs
+DTC = $(objtree)/scripts/dtc/dtc
+
+# Rule to build device tree blobs
+quiet_cmd_dtc = DTC     $@
+	cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts
+
+$(obj)/%.dtb: $(dtstree)/%.dts FORCE
+	$(call if_changed,dtc)
+
+clean-kernel += linux.bin linux.bin.gz simpleImage.*
+
+clean-files += *.dtb
diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts
new file mode 120000
index 00000000000..7cb657892f2
--- /dev/null
+++ b/arch/microblaze/boot/dts/system.dts
@@ -0,0 +1 @@
+../../platform/generic/system.dts
\ No newline at end of file
diff --git a/arch/microblaze/boot/linked_dtb.S b/arch/microblaze/boot/linked_dtb.S
new file mode 100644
index 00000000000..cb2b537aebe
--- /dev/null
+++ b/arch/microblaze/boot/linked_dtb.S
@@ -0,0 +1,3 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/system.dtb"
+
-- 
cgit v1.2.3


From bfc8125858d777bd5bdba03a091c07cc2e0e17c0 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 22 Sep 2009 10:32:33 +0200
Subject: microblaze: Disable heartbeat/enable emaclite in defconfigs

I need to disable heartbeat function because this features
breaks testing in Qemu.

Signed-off-by: Michal Simek <monstr@monstr.eu>
---
 arch/microblaze/configs/mmu_defconfig   | 30 ++++++++++++++++------------
 arch/microblaze/configs/nommu_defconfig | 35 +++++++++++++++++++--------------
 2 files changed, 37 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index 09c32962b66..bb7c374713a 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 11:00:02 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:28:50 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -42,11 +42,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -260,6 +261,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -357,12 +359,10 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_KS8842 is not set
+CONFIG_XILINX_EMACLITE=y
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -460,6 +460,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -488,6 +489,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -546,7 +548,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -671,18 +672,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KMEMCHECK is not set
 CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
 CONFIG_DEBUG_BOOTMEM=y
 
 #
@@ -697,7 +700,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -729,11 +731,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index 8b638615a97..adb839bab70 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 10:35:30 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:29:43 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -44,11 +44,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -243,6 +244,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -272,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -279,7 +282,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -304,6 +306,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -349,6 +352,7 @@ CONFIG_MTD_RAM=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PHYSMAP_OF is not set
 CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_PLATRAM is not set
 
@@ -429,12 +433,10 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_KS8842 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -535,7 +537,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -579,6 +581,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -639,7 +642,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -710,18 +712,20 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 
 #
@@ -736,7 +740,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -768,11 +771,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
-- 
cgit v1.2.3


From 23c4c82171008c8b18d8627c9741cdd577631cea Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 24 Sep 2009 17:38:18 +0900
Subject: sh: Handle unaligned 16-bit instructions on SH-2A.

This adds some sanity checking in the unaligned instruction handler to
verify the instruction size, which enables basic support for 16-bit
fixups on SH-2A parts.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 6aba9af79ea..f9760c5c234 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -452,6 +452,12 @@ int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
 	u_int rm;
 	int ret, index;
 
+	/*
+	 * XXX: We can't handle mixed 16/32-bit instructions yet
+	 */
+	if (instruction_size(instruction) != 2)
+		return -EINVAL;
+
 	index = (instruction>>8)&15;	/* 0x0F00 */
 	rm = regs->regs[index];
 
@@ -619,9 +625,9 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 
 		se_user += 1;
 
-#ifndef CONFIG_CPU_SH2A
 		set_fs(USER_DS);
-		if (copy_from_user(&instruction, (u16 *)(regs->pc & ~1), 2)) {
+		if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
+				   sizeof(instruction))) {
 			set_fs(oldfs);
 			goto uspace_segv;
 		}
@@ -633,7 +639,6 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 			       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
 			       current->comm, current->pid, (void *)regs->pc,
 			       instruction);
-#endif
 
 		if (se_usermode & 2)
 			goto fixup;
-- 
cgit v1.2.3


From 40258ee97d0d5e5c30a3d4b7acaf294fe82cd23f Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Thu, 24 Sep 2009 17:48:15 +0900
Subject: sh: Fix up uninitialized variable use caught by gcc 4.4.

In the unaligned kernel exception fixup case the printk() was ordered
before the copy_from_user(), resulting in a nonsensical instruction
value. This fixes up the ordering properly.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/traps_32.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index f9760c5c234..69bb1652ecc 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -678,12 +678,6 @@ uspace_segv:
 	} else {
 		se_sys += 1;
 
-		if (se_kernmode_warn)
-			printk(KERN_NOTICE "Unaligned kernel access "
-			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
-			       current->comm, current->pid, (void *)regs->pc,
-			       instruction);
-
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
 
@@ -697,6 +691,12 @@ uspace_segv:
 			die("insn faulting in do_address_error", regs, 0);
 		}
 
+		if (se_kernmode_warn)
+			printk(KERN_NOTICE "Unaligned kernel access "
+			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			       current->comm, current->pid, (void *)regs->pc,
+			       instruction);
+
 		handle_unaligned_access(instruction, regs,
 					&user_mem_access, 0);
 		set_fs(oldfs);
-- 
cgit v1.2.3


From ea01c0d7315d6e3218fd22a6947c5b09305fcf65 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rdreier@cisco.com>
Date: Wed, 23 Sep 2009 15:33:23 -0700
Subject: x86: Reduce verbosity of "TSC is reliable" message

On modern systems, the kernel prints the message

    Skipping synchronization checks as TSC is reliable.

once for every non-boot CPU.

This gets kind of ridiculous on huge systems; for example, on a
64-thread system I was lucky enough to get:

    $ dmesg | grep 'TSC is reliable' | wc
         63     567    4221

There's no point to doing this for every CPU, since the code is
just checking the boot CPU anyway, so change this to a
printk_once() to make the message appears only once.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
LKML-Reference: <adazl8l2swc.fsf@cisco.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tsc_sync.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 027b5b49899..f37930954d1 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -114,7 +114,7 @@ void __cpuinit check_tsc_sync_source(int cpu)
 		return;
 
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
-		pr_info("Skipping synchronization checks as TSC is reliable.\n");
+		printk_once(KERN_INFO "Skipping synchronization checks as TSC is reliable.\n");
 		return;
 	}
 
-- 
cgit v1.2.3


From e23a8b6a8f319c0f08b6ccef2dccbb37e7603dc2 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rdreier@cisco.com>
Date: Wed, 23 Sep 2009 15:35:35 -0700
Subject: x86: Reduce verbosity of "PAT enabled" kernel message

On modern systems, the kernel prints the message

    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

once for every CPU.

This gets kind of ridiculous on huge systems; for example, on a
64-thread system I was lucky enough to get:

    dmesg| grep 'PAT enabled' | wc
         64     704    5174

There is already a BUG() if non-boot CPUs have PAT capabilities
that don't match the boot CPU, so just print the message on the
boot CPU. (I kept the print after the wrmsrl() that enables PAT,
so that the log output continues to mean that the system survived
enabling PAT on the boot CPU)

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <adavdj92sso.fsf@cisco.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 7257cf3decf..e78cd0ec2bc 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -81,6 +81,7 @@ enum {
 void pat_init(void)
 {
 	u64 pat;
+	bool boot_cpu = !boot_pat_state;
 
 	if (!pat_enabled)
 		return;
@@ -122,8 +123,10 @@ void pat_init(void)
 		rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
 
 	wrmsrl(MSR_IA32_CR_PAT, pat);
-	printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
-	       smp_processor_id(), boot_pat_state, pat);
+
+	if (boot_cpu)
+		printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
+		       smp_processor_id(), boot_pat_state, pat);
 }
 
 #undef PAT
-- 
cgit v1.2.3


From 429a6e5e2c1fbe5d805aad123efbdb5f0c14769f Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 23 Sep 2009 18:13:13 -0500
Subject: x86: early_printk: Protect against using the same device twice

If you use the kernel argument:

  earlyprintk=serial,ttyS0,115200

This will cause a recursive hang printing the same line
again and again:

 BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009

Instead warn the end user that they specified the device
a second time, and ignore that second console.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4ABAAB89.1080407@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/early_printk.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3fdc0c..41fd965c80c 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -178,6 +178,11 @@ asmlinkage void early_printk(const char *fmt, ...)
 
 static inline void early_console_register(struct console *con, int keep_early)
 {
+	if (early_console->index != -1) {
+		printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
+		       con->name);
+		return;
+	}
 	early_console = con;
 	if (keep_early)
 		early_console->flags &= ~CON_BOOT;
-- 
cgit v1.2.3


From b0c6fbe458183cc7e1cab17be6efcbe7e435bad3 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Thu, 24 Sep 2009 17:48:44 +0930
Subject: x86: Remove redundant non-NUMA topology functions

arch/x86/include/asm/topology.h declares inline fns cpu_to_node and
cpumask_of_node for !NUMA, even though they are then declared as
macros by asm-generic/topology.h, which is #included just below.

The macros (which are the same) end up being used; these functions
are just confusing.

Noticed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "Greg Kroah-Hartman" <gregkh@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <200909241748.45629.rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/topology.h | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 6f0695d744b..25a92842dd9 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -165,21 +165,11 @@ static inline int numa_node_id(void)
 	return 0;
 }
 
-static inline int cpu_to_node(int cpu)
-{
-	return 0;
-}
-
 static inline int early_cpu_to_node(int cpu)
 {
 	return 0;
 }
 
-static inline const struct cpumask *cpumask_of_node(int node)
-{
-	return cpu_online_mask;
-}
-
 static inline void setup_node_to_cpumask_map(void) { }
 
 #endif
-- 
cgit v1.2.3


From ba0a6c9f6fceed11c6a99e8326f0477fe383e6b5 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 23 Sep 2009 15:57:03 -0700
Subject: fcntl: add F_[SG]ETOWN_EX

In order to direct the SIGIO signal to a particular thread of a
multi-threaded application we cannot, like suggested by the manpage, put a
TID into the regular fcntl(F_SETOWN) call.  It will still be send to the
whole process of which that thread is part.

Since people do want to properly direct SIGIO we introduce F_SETOWN_EX.

The need to direct SIGIO comes from self-monitoring profiling such as with
perf-counters.  Perf-counters uses SIGIO to notify that new sample data is
available.  If the signal is delivered to the same task that generated the
new sample it can augment that data by inspecting the task's user-space
state right after it returns from the kernel.  This is esp.  convenient
for interpreted or virtual machine driven environments.

Both F_SETOWN_EX and F_GETOWN_EX take a pointer to a struct f_owner_ex
as argument:

struct f_owner_ex {
	int   type;
	pid_t pid;
};

Where type is one of F_OWNER_TID, F_OWNER_PID or F_OWNER_GID.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: stephane eranian <eranian@googlemail.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/fcntl.h  | 2 ++
 arch/parisc/include/asm/fcntl.h | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h
index 25da0017ec8..e42823e954a 100644
--- a/arch/alpha/include/asm/fcntl.h
+++ b/arch/alpha/include/asm/fcntl.h
@@ -26,6 +26,8 @@
 #define F_GETOWN	6	/*  for sockets. */
 #define F_SETSIG	10	/*  for sockets. */
 #define F_GETSIG	11	/*  for sockets. */
+#define F_SETOWN_EX	12
+#define F_GETOWN_EX	13
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK		1
diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h
index 1e1c824764e..5f39d5597ce 100644
--- a/arch/parisc/include/asm/fcntl.h
+++ b/arch/parisc/include/asm/fcntl.h
@@ -28,6 +28,8 @@
 #define F_SETOWN	12	/*  for sockets. */
 #define F_SETSIG	13	/*  for sockets. */
 #define F_GETSIG	14	/*  for sockets. */
+#define F_GETOWN_EX	15
+#define F_SETOWN_EX	16
 
 /* for posix fcntl() and lockf() */
 #define F_RDLCK		01
-- 
cgit v1.2.3


From 8d65af789f3e2cf4cfbdbf71a0f7a61ebcd41d38 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Wed, 23 Sep 2009 15:57:19 -0700
Subject: sysctl: remove "struct file *" argument of ->proc_handler

It's unused.

It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.

It _was_ used in two places at arch/frv for some reason.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/pm.c               | 14 +++++++-------
 arch/mips/lasat/sysctl.c           | 18 +++++++++---------
 arch/s390/appldata/appldata_base.c |  9 ++++-----
 arch/s390/kernel/debug.c           |  4 ++--
 arch/s390/mm/cmm.c                 |  4 ++--
 arch/x86/include/asm/nmi.h         |  3 +--
 arch/x86/kernel/apic/nmi.c         |  4 ++--
 arch/x86/kernel/vsyscall_64.c      | 10 +---------
 8 files changed, 28 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index be722fc1acf..0d4d3e3a4cf 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -150,7 +150,7 @@ static int user_atoi(char __user *ubuf, size_t len)
 /*
  * Send us to sleep.
  */
-static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
+static int sysctl_pm_do_suspend(ctl_table *ctl, int write,
 				void __user *buffer, size_t *lenp, loff_t *fpos)
 {
 	int retval, mode;
@@ -198,13 +198,13 @@ static int try_set_cmode(int new_cmode)
 }
 
 
-static int cmode_procctl(ctl_table *ctl, int write, struct file *filp,
+static int cmode_procctl(ctl_table *ctl, int write,
 			 void __user *buffer, size_t *lenp, loff_t *fpos)
 {
 	int new_cmode;
 
 	if (!write)
-		return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+		return proc_dointvec(ctl, write, buffer, lenp, fpos);
 
 	new_cmode = user_atoi(buffer, *lenp);
 
@@ -301,13 +301,13 @@ static int try_set_cm(int new_cm)
 	return 0;
 }
 
-static int p0_procctl(ctl_table *ctl, int write, struct file *filp,
+static int p0_procctl(ctl_table *ctl, int write,
 		      void __user *buffer, size_t *lenp, loff_t *fpos)
 {
 	int new_p0;
 
 	if (!write)
-		return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+		return proc_dointvec(ctl, write, buffer, lenp, fpos);
 
 	new_p0 = user_atoi(buffer, *lenp);
 
@@ -345,13 +345,13 @@ static int p0_sysctl(ctl_table *table,
 	return 1;
 }
 
-static int cm_procctl(ctl_table *ctl, int write, struct file *filp,
+static int cm_procctl(ctl_table *ctl, int write,
 		      void __user *buffer, size_t *lenp, loff_t *fpos)
 {
 	int new_cm;
 
 	if (!write)
-		return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+		return proc_dointvec(ctl, write, buffer, lenp, fpos);
 
 	new_cm = user_atoi(buffer, *lenp);
 
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index 3f04d4c406b..b3deed8db61 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -56,12 +56,12 @@ int sysctl_lasatstring(ctl_table *table,
 
 
 /* And the same for proc */
-int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
+int proc_dolasatstring(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int r;
 
-	r = proc_dostring(table, write, filp, buffer, lenp, ppos);
+	r = proc_dostring(table, write, buffer, lenp, ppos);
 	if ((!write) || r)
 		return r;
 
@@ -71,12 +71,12 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
 }
 
 /* proc function to write EEPROM after changing int entry */
-int proc_dolasatint(ctl_table *table, int write, struct file *filp,
+int proc_dolasatint(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int r;
 
-	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+	r = proc_dointvec(table, write, buffer, lenp, ppos);
 	if ((!write) || r)
 		return r;
 
@@ -89,7 +89,7 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp,
 static int rtctmp;
 
 /* proc function to read/write RealTime Clock */
-int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
+int proc_dolasatrtc(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct timespec ts;
@@ -102,7 +102,7 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 		if (rtctmp < 0)
 			rtctmp = 0;
 	}
-	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+	r = proc_dointvec(table, write, buffer, lenp, ppos);
 	if (r)
 		return r;
 
@@ -154,7 +154,7 @@ int sysctl_lasat_rtc(ctl_table *table,
 #endif
 
 #ifdef CONFIG_INET
-int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
+int proc_lasat_ip(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	unsigned int ip;
@@ -231,12 +231,12 @@ static int sysctl_lasat_prid(ctl_table *table,
 	return 0;
 }
 
-int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int r;
 
-	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+	r = proc_dointvec(table, write, buffer, lenp, ppos);
 	if (r < 0)
 		return r;
 	if (write) {
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 264528e4f58..b55fd7ed1c3 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -50,10 +50,9 @@ static struct platform_device *appldata_pdev;
  * /proc entries (sysctl)
  */
 static const char appldata_proc_name[APPLDATA_PROC_NAME_LENGTH] = "appldata";
-static int appldata_timer_handler(ctl_table *ctl, int write, struct file *filp,
+static int appldata_timer_handler(ctl_table *ctl, int write,
 				  void __user *buffer, size_t *lenp, loff_t *ppos);
 static int appldata_interval_handler(ctl_table *ctl, int write,
-					 struct file *filp,
 					 void __user *buffer,
 					 size_t *lenp, loff_t *ppos);
 
@@ -247,7 +246,7 @@ __appldata_vtimer_setup(int cmd)
  * Start/Stop timer, show status of timer (0 = not active, 1 = active)
  */
 static int
-appldata_timer_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_timer_handler(ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	int len;
@@ -289,7 +288,7 @@ out:
  * current timer interval.
  */
 static int
-appldata_interval_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_interval_handler(ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	int len, interval;
@@ -335,7 +334,7 @@ out:
  * monitoring (0 = not in process, 1 = in process)
  */
 static int
-appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_generic_handler(ctl_table *ctl, int write,
 			   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	struct appldata_ops *ops = NULL, *tmp_ops;
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 4c512561687..20f282c911c 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -881,11 +881,11 @@ static int debug_active=1;
  * if debug_active is already off
  */
 static int
-s390dbf_procactive(ctl_table *table, int write, struct file *filp,
+s390dbf_procactive(ctl_table *table, int write,
                      void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	if (!write || debug_stoppable || !debug_active)
-		return proc_dointvec(table, write, filp, buffer, lenp, ppos);
+		return proc_dointvec(table, write, buffer, lenp, ppos);
 	else
 		return 0;
 }
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 413c240cbca..b201135cc18 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -262,7 +262,7 @@ cmm_skip_blanks(char *cp, char **endp)
 static struct ctl_table cmm_table[];
 
 static int
-cmm_pages_handler(ctl_table *ctl, int write, struct file *filp,
+cmm_pages_handler(ctl_table *ctl, int write,
 		  void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char buf[16], *p;
@@ -303,7 +303,7 @@ cmm_pages_handler(ctl_table *ctl, int write, struct file *filp,
 }
 
 static int
-cmm_timeout_handler(ctl_table *ctl, int write, struct file *filp,
+cmm_timeout_handler(ctl_table *ctl, int write,
 		    void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char buf[64], *p;
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index e63cf7d441e..139d4c1a33a 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -40,8 +40,7 @@ extern unsigned int nmi_watchdog;
 #define NMI_INVALID	3
 
 struct ctl_table;
-struct file;
-extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
+extern int proc_nmi_enabled(struct ctl_table *, int ,
 			void __user *, size_t *, loff_t *);
 extern int unknown_nmi_panic;
 
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index cb66a22d98a..7ff61d6a188 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -508,14 +508,14 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
 /*
  * proc handler for /proc/sys/kernel/nmi
  */
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
+int proc_nmi_enabled(struct ctl_table *table, int write,
 			void __user *buffer, size_t *length, loff_t *ppos)
 {
 	int old_state;
 
 	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
 	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, file, buffer, length, ppos);
+	proc_dointvec(table, write, buffer, length, ppos);
 	if (!!old_state == !!nmi_watchdog_enabled)
 		return 0;
 
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index cf53a78e2dc..8cb4974ff59 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -228,19 +228,11 @@ static long __vsyscall(3) venosys_1(void)
 }
 
 #ifdef CONFIG_SYSCTL
-
-static int
-vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
-		       void __user *buffer, size_t *lenp, loff_t *ppos)
-{
-	return proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
-}
-
 static ctl_table kernel_table2[] = {
 	{ .procname = "vsyscall64",
 	  .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int),
 	  .mode = 0644,
-	  .proc_handler = vsyscall_sysctl_change },
+	  .proc_handler = proc_dointvec },
 	{}
 };
 
-- 
cgit v1.2.3


From d68721eb339e9237c11c1fea5f73f86211d14918 Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Wed, 23 Sep 2009 15:57:42 -0700
Subject: alpha: AGP update (fixes compile failure)

This brings Alpha AGP platforms in sync with the change to struct
agp_memory (unsigned long *memory => struct page **pages).

Only compile tested (I don't have titan/marvel hardware), but this change
looks pretty straightforward, so hopefully it's ok.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Dave Airlie <airlied@linux.ie>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/core_marvel.c | 2 +-
 arch/alpha/kernel/core_titan.c  | 2 +-
 arch/alpha/kernel/pci_impl.h    | 2 +-
 arch/alpha/kernel/pci_iommu.c   | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index e302daecbe5..8e059e58b0a 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -1016,7 +1016,7 @@ marvel_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *m
 {
 	struct marvel_agp_aperture *aper = agp->aperture.sysdata;
 	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
-			  mem->page_count, mem->memory);
+			  mem->page_count, mem->pages);
 }
 
 static int 
diff --git a/arch/alpha/kernel/core_titan.c b/arch/alpha/kernel/core_titan.c
index 319fcb74611..76686497b1e 100644
--- a/arch/alpha/kernel/core_titan.c
+++ b/arch/alpha/kernel/core_titan.c
@@ -680,7 +680,7 @@ titan_agp_bind_memory(alpha_agp_info *agp, off_t pg_start, struct agp_memory *me
 {
 	struct titan_agp_aperture *aper = agp->aperture.sysdata;
 	return iommu_bind(aper->arena, aper->pg_start + pg_start, 
-			  mem->page_count, mem->memory);
+			  mem->page_count, mem->pages);
 }
 
 static int 
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
index 00edd04b585..85457b2d451 100644
--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -198,7 +198,7 @@ extern unsigned long size_for_memory(unsigned long max);
 
 extern int iommu_reserve(struct pci_iommu_arena *, long, long);
 extern int iommu_release(struct pci_iommu_arena *, long, long);
-extern int iommu_bind(struct pci_iommu_arena *, long, long, unsigned long *);
+extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
 extern int iommu_unbind(struct pci_iommu_arena *, long, long);
 
 
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index d15aedfe606..8449504f5e0 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -876,7 +876,7 @@ iommu_release(struct pci_iommu_arena *arena, long pg_start, long pg_count)
 
 int
 iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count, 
-	   unsigned long *physaddrs)
+	   struct page **pages)
 {
 	unsigned long flags;
 	unsigned long *ptes;
@@ -896,7 +896,7 @@ iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
 	}
 		
 	for(i = 0, j = pg_start; i < pg_count; i++, j++)
-		ptes[j] = mk_iommu_pte(physaddrs[i]);
+		ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));
 
 	spin_unlock_irqrestore(&arena->lock, flags);
 
-- 
cgit v1.2.3


From 5328ae3af18b16df758df1bcb28fb5e1ad56d97a Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:04 -0700
Subject: omap: Fix compile for arch/arm/mach-omap2

Patch 941132606c7611246d2034cb7b01f9270c2d1ede split IO_ADDRESS
into OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS except for the omap4
code to avoid merge conflicts with the omap4 code that was queued
earlier.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/serial.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a529c77daa..faada9fbfbc 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -110,7 +110,7 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 #ifdef CONFIG_ARCH_OMAP4
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -126,7 +126,7 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
-- 
cgit v1.2.3


From af41a12f09cf78498f63d5cd726d604739671001 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:05 -0700
Subject: omap: Fix mcspi compile for 2420

Commit 7869c0b9ed44404bbc675ef76f8ccb3be5496f39 added support for
additional McSPI ports. Unfortunately that broke compile for 2420.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c | 65 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 48 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index bcfcfc7fdb9..faf7a1e0c52 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -355,29 +355,60 @@ static struct platform_device omap2_mcspi4 = {
 };
 #endif
 
-static void omap_init_mcspi(void)
+#ifdef CONFIG_ARCH_OMAP4
+static inline void omap4_mcspi_fixup(void)
 {
-	if (cpu_is_omap44xx()) {
-		omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
-		omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
-		omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
-		omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
-		omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
-		omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
-		omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
-		omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
-	}
-	platform_device_register(&omap2_mcspi1);
-	platform_device_register(&omap2_mcspi2);
+	omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
+	omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
+	omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
+	omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
+	omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
+	omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
+	omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
+	omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
+}
+#else
+static inline void omap4_mcspi_fixup(void)
+{
+}
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi3);
+static inline void omap2_mcspi3_init(void)
+{
+	platform_device_register(&omap2_mcspi3);
+}
+#else
+static inline void omap2_mcspi3_init(void)
+{
+}
 #endif
+
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi4);
+static inline void omap2_mcspi4_init(void)
+{
+	platform_device_register(&omap2_mcspi4);
+}
+#else
+static inline void omap2_mcspi4_init(void)
+{
+}
 #endif
+
+static void omap_init_mcspi(void)
+{
+	if (cpu_is_omap44xx())
+		omap4_mcspi_fixup();
+
+	platform_device_register(&omap2_mcspi1);
+	platform_device_register(&omap2_mcspi2);
+
+	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi3_init();
+
+	if (cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi4_init();
 }
 
 #else
-- 
cgit v1.2.3


From 61f04ee83c768c556168b09d71f0dc87b4a6090a Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:07 -0700
Subject: omap: Fix 44xx compile

Looks like these patches were not tested that well..

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/cm4xxx.c | 17 ++---------------
 arch/arm/mach-omap2/io.c     |  4 ++--
 arch/arm/mach-omap2/serial.c |  2 +-
 3 files changed, 5 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
index e4ebd6d5313..4af76bb1003 100644
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -22,7 +22,6 @@
 #include <asm/atomic.h>
 
 #include "cm.h"
-#include "cm-regbits-4xxx.h"
 
 /* XXX move this to cm.h */
 /* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
@@ -50,19 +49,7 @@
  */
 int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
 {
-	int i = 0;
-	u8 cm_id;
-	u16 prcm_mod_offs;
-	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
-
-	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
-	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
-
-	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
-				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
-	       (i++ < MAX_MODULE_READY_TIME))
-		udelay(1);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+	/* FIXME: Add clock manager related code */
+	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7574b6f20e8..e3a3bad1d84 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -294,10 +294,10 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	else if (cpu_is_omap34xx())
 		hwmods = omap34xx_hwmods;
 
-	omap_hwmod_init(hwmods);
-	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	/* The OPP tables have to be registered before a clk init */
+	omap_hwmod_init(hwmods);
+	omap2_mux_init();
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index faada9fbfbc..ae2186892c8 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -579,7 +579,7 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 	{
 		.pdev = {
 			.name			= "serial8250",
-			.id			= 3
+			.id			= 3,
 			.dev			= {
 				.platform_data	= serial_platform_data3,
 			},
-- 
cgit v1.2.3


From 41a03c539c6e3cc772fc15a827ea2aa040c9848d Mon Sep 17 00:00:00 2001
From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Date: Thu, 24 Sep 2009 16:23:08 -0700
Subject: omap: Add missing mux pin for EHCI phy reset line

GPIO135 is used as EHCI (port2) phy reset pin on Multi Media Daughter card
connected to OMAP3EVM.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mux.c             | 2 ++
 arch/arm/plat-omap/include/mach/mux.h | 1 +
 2 files changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 2daa595aaff..339ba80ee68 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -472,6 +472,8 @@ MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 98dfab651df..4bcf8a59d8c 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -846,6 +846,7 @@ enum omap34xx_index {
 	L8_34XX_GPIO63,
 	G25_34XX_GPIO86_OUT,
 	AG4_34XX_GPIO134_OUT,
+	AF4_34XX_GPIO135_OUT,
 	AE4_34XX_GPIO136_OUT,
 	AF6_34XX_GPIO140_UP,
 	AE6_34XX_GPIO141,
-- 
cgit v1.2.3


From 1ffe627dcfce820b316ee520c58fca54550a18ee Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Thu, 24 Sep 2009 16:23:09 -0700
Subject: omap: mailbox: Execute softreset at startup

The softreset at startup is introduced as TRM describes and also some
register bit definitions are added instead of magic number.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mailbox.c | 30 +++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6f71f3730c9..5bf9a2fdb68 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -30,6 +30,14 @@
 #define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
 #define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
+/* SYSCONFIG: register bit definition */
+#define AUTOIDLE	(1 << 0)
+#define SOFTRESET	(1 << 1)
+#define SMARTIDLE	(2 << 3)
+
+/* SYSSTATUS: register bit definition */
+#define RESETDONE	(1 << 0)
+
 #define MBOX_REG_SIZE			0x120
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
 
@@ -69,21 +77,33 @@ static inline void mbox_write_reg(u32 val, size_t ofs)
 /* Mailbox H/W preparations */
 static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
-	unsigned int l;
+	u32 l;
+	unsigned long timeout;
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		printk("Could not get mailboxes_ick\n");
+		pr_err("Can't get mailboxes_ick\n");
 		return -ENODEV;
 	}
 	clk_enable(mbox_ick_handle);
 
+	mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = mbox_read_reg(MAILBOX_SYSSTATUS);
+		if (l & RESETDONE)
+			break;
+	} while (time_after(jiffies, timeout));
+
+	if (!(l & RESETDONE)) {
+		pr_err("Can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
 	l = mbox_read_reg(MAILBOX_REVISION);
 	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
-	/* set smart-idle & autoidle */
-	l = mbox_read_reg(MAILBOX_SYSCONFIG);
-	l |= 0x00000011;
+	l = SMARTIDLE | AUTOIDLE;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
 	omap2_mbox_enable_irq(mbox, IRQ_RX);
-- 
cgit v1.2.3


From 8828880d09e4466ad6b357a31fdd242594c7b111 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Thu, 24 Sep 2009 16:23:10 -0700
Subject: omap: mailbox: Flush posted write when acking mailbox irq

The only way to flush posted write to L4 bus is to do a read back
of the same register right after the write.

This seems to be mostly needed in interrupt handlers to avoid
causing spurious interrupts.

The earlier fix has been to mark the L4 bus as strongly ordered
memory, which solves the problem, but causes performance penalties.

Similar to the fix, 03803a71041e3bc3c077f4e7b92f6ceaa9426df3

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/mailbox.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 5bf9a2fdb68..f3fefca5849 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -176,6 +176,9 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 
 	mbox_write_reg(bit, p->irqstatus);
+
+	/* Flush posted write for irq status to avoid spurious interrupts */
+	mbox_read_reg(p->irqstatus);
 }
 
 static int omap2_mbox_is_irq(struct omap_mbox *mbox,
-- 
cgit v1.2.3


From 6716bd06810c64ef0ca4c12462fb2eb2352a7df9 Mon Sep 17 00:00:00 2001
From: Sanjeev Premi <premi@ti.com>
Date: Thu, 24 Sep 2009 16:23:12 -0700
Subject: omap: iovmm: Fix compiler warning

This patch fixes these compiler warnings:

arch/arm/plat-omap/iovmm.c: In function 'vmap_sg':
arch/arm/plat-omap/iovmm.c:202: warning: passing argument 1 of
 'flush_cache_vmap' makes integer from pointer without a cast
arch/arm/plat-omap/iovmm.c:202: warning: passing argument 2 of
 'flush_cache_vmap' makes integer from pointer without a cast
arch/arm/plat-omap/iovmm.c: In function 'sgtable_fill_vmalloc':
arch/arm/plat-omap/iovmm.c:393: warning: passing argument 1 of
 'flush_cache_vmap' makes integer from pointer without a cast
arch/arm/plat-omap/iovmm.c:393: warning: passing argument 2 of
 'flush_cache_vmap' makes integer from pointer without a cast

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/iovmm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 6fc52fcbdc0..57f7122a091 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -199,7 +199,8 @@ static void *vmap_sg(const struct sg_table *sgt)
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, new->addr + total);
+	flush_cache_vmap((unsigned long)new->addr,
+				(unsigned long)(new->addr + total));
 	return new->addr;
 
 err_out:
@@ -390,7 +391,7 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap(_va, va_end);
+	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
-- 
cgit v1.2.3


From f5ee2fc7931c692da7315d65675399f2e46af1e7 Mon Sep 17 00:00:00 2001
From: Angelo Arrifano <miknix@gmail.com>
Date: Thu, 24 Sep 2009 16:23:13 -0700
Subject: omap: Fix wrong jtag_id for 850

Original message:
The previous value of the jtag_id was set for the omap730.  For the
omap850, this value is different, and this was causing
autodetection to fail.

Reported-by:
  Cory Maccarrone <darkstar6262@gmail.com>
  Angelo Arrifano <miknix@gmail.com>
  Alistair Buxton <a.j.buxton@gmail.com>

Signed-off-by: Angelo Arrifano <miknix@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/id.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 4ef26faf083..e5dcdf764c9 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,7 +38,7 @@ static struct omap_id omap_ids[] __initdata = {
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
+	{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
-- 
cgit v1.2.3


From 501e9bd5ff00ea726e91cef7df61f889bdec2105 Mon Sep 17 00:00:00 2001
From: Angelo Arrifano <miknix@gmail.com>
Date: Thu, 24 Sep 2009 16:23:14 -0700
Subject: omap: Fix a OMAP_MPUIO_VBASE typo for 850

This was crashing omap850 devices.

Reported-by:
  Alistair Buxton <a.j.buxton@gmail.com>

Signed-off-by: Angelo Arrifano <miknix@gmail.com>
Signed-obb-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 693839c89ad..71ebd7fcfea 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -250,7 +250,7 @@ static struct gpio_bank gpio_bank_730[7] = {
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
-- 
cgit v1.2.3


From 4f5433324d1e29cf234d5b1b14782c0fc2948298 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 24 Sep 2009 16:23:16 -0700
Subject: omap: Fix matrix_keymap_data usage

Otherwise we'll get compile errors like:

arch/arm/plat-omap/include/mach/keypad.h:38:1: warning: "KEY" redefined
arch/arm/plat-omap/include/mach/keypad.h:39:1: warning: "PERSISTENT_KEY" redefined
...

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-3430sdp.c          | 10 +++++++---
 arch/arm/mach-omap2/board-ldp.c              | 10 +++++++---
 arch/arm/mach-omap2/board-omap3evm.c         | 10 +++++++---
 arch/arm/mach-omap2/board-omap3pandora.c     | 10 +++++++---
 arch/arm/mach-omap2/board-rx51-peripherals.c | 10 +++++++---
 arch/arm/mach-omap2/board-zoom2.c            | 10 +++++++---
 arch/arm/plat-omap/include/mach/keypad.h     |  5 ++---
 7 files changed, 44 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd57ec76dc5..efaf053eba8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -54,7 +54,7 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static int sdp3430_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -88,11 +88,15 @@ static int sdp3430_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data sdp3430_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 5,
 	.cols		= 6,
-	.keymap		= sdp3430_keymap,
-	.keymapsize	= ARRAY_SIZE(sdp3430_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ec6854cbdd9..d110a7fdfbd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -80,7 +80,7 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static int ldp_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
 	KEY(2, 0, KEY_3),
@@ -101,11 +101,15 @@ static int ldp_twl4030_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 6,
 	.cols		= 6,
-	.keymap		= ldp_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d50b9be9058..e4ec0c59121 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -159,7 +159,7 @@ static struct twl4030_usb_data omap3evm_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int omap3evm_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -178,11 +178,15 @@ static int omap3evm_keymap[] = {
 	KEY(3, 3, KEY_P)
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data omap3evm_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 4,
 	.cols		= 4,
-	.keymap		= omap3evm_keymap,
-	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b43f6e36b6d..7f6bf8772af 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -133,7 +133,7 @@ static void __init pandora_keys_gpio_init(void)
 	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 
-static int pandora_keypad_map[] = {
+static int board_keymap[] = {
 	/* col, row, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_0),
@@ -180,11 +180,15 @@ static int pandora_keypad_map[] = {
 	KEY(5, 2, KEY_FN),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data pandora_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 6,
-	.keymap		= pandora_keypad_map,
-	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e6e8290b782..b45ad312c58 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -36,7 +36,7 @@
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
-static int rx51_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_W),
 	KEY(0, 2, KEY_E),
@@ -83,11 +83,15 @@ static int rx51_keymap[] = {
 	KEY(0xff, 5, KEY_F10),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data rx51_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= rx51_keymap,
-	.keymapsize	= ARRAY_SIZE(rx51_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 324009edbd5..b7b32208ced 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -27,7 +27,7 @@
 #include "mmc-twl4030.h"
 
 /* Zoom2 has Qwerty keyboard*/
-static int zoom2_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_E),
 	KEY(1, 0, KEY_R),
 	KEY(2, 0, KEY_T),
@@ -82,11 +82,15 @@ static int zoom2_twl4030_keymap[] = {
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= zoom2_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 45ea3ae3c99..d91b9be334f 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,6 +10,8 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
+#include <linux/input/matrix_keypad.h>
+
 struct omap_kp_platform_data {
 	int rows;
 	int cols;
@@ -35,9 +37,6 @@ struct omap_kp_platform_data {
 
 #define KEY_PERSISTENT		0x00800000
 #define KEYNUM_MASK		0x00EFFFFF
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
-						KEY_PERSISTENT)
 
 #endif
 
-- 
cgit v1.2.3


From 44e74840d668d23b65e22772828e2600641b6ab0 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Thu, 24 Sep 2009 16:23:17 -0700
Subject: omap: Fix MMC gpio_wp for BeagleBoard C2 and above

Earlier BeagleBoards were using pad AH8 muxed to GPIO29 for MMC write-protect.
However, this signal has been changed to pad AG9 in board revision C2.

Fix this by adding mux configuration for pad AG9, runtime check for board
revisions and set the gpio number and pad muxing accordingly.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c | 7 ++++++-
 arch/arm/mach-omap2/mux.c               | 2 ++
 arch/arm/plat-omap/include/mach/mux.h   | 1 +
 3 files changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 500c9956876..70df6b4dbcd 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -139,8 +139,13 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_cfg_reg(AG9_34XX_GPIO23);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_cfg_reg(AH8_34XX_GPIO29);
+	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(AH8_34XX_GPIO29);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 339ba80ee68..b5fac32aae7 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -460,6 +460,8 @@ MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 4bcf8a59d8c..0f49d2d563d 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -840,6 +840,7 @@ enum omap34xx_index {
 	 */
 	AF26_34XX_GPIO0,
 	AF22_34XX_GPIO9,
+	AG9_34XX_GPIO23,
 	AH8_34XX_GPIO29,
 	U8_34XX_GPIO54_OUT,
 	U8_34XX_GPIO54_DOWN,
-- 
cgit v1.2.3


From 57a8e1161e1a944823542138e61dd8f38fd9b9e8 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:17 -0400
Subject: parisc: Clean up linker script using new linker script macros.

This patch has the (likely harmless) side effect of moving
.data.init_task inside the _edata.

It also changes the alignment of .data.init_task from 16384 to
THREAD_SIZE, which can in some configurations be larger than 16384.  I
believe that this change fixes a potential bug on those
configurations.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/parisc/kernel/vmlinux.lds.S | 79 ++--------------------------------------
 1 file changed, 4 insertions(+), 75 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index aea1784edbd..3fd66d97fca 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -77,13 +77,7 @@ SECTIONS
 	 */
 	. = ALIGN(PAGE_SIZE);
 	data_start = .;
-	. = ALIGN(16);
-	/* Exception table */
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	NOTES
 
@@ -94,23 +88,8 @@ SECTIONS
 		__stop___unwind = .;
 	}
 
-	/* rarely changed data like cpu maps */
-	. = ALIGN(16);
-	.data.read_mostly : {
-		*(.data.read_mostly)
-	}
-
-	. = ALIGN(L1_CACHE_BYTES);
 	/* Data */
-	.data : {
-		DATA_DATA
-		CONSTRUCTORS
-	}
-
-	. = ALIGN(L1_CACHE_BYTES);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
 	/* PA-RISC locks requires 16-byte alignment */
 	. = ALIGN(16);
@@ -118,17 +97,6 @@ SECTIONS
 		*(.data.lock_aligned)
 	}
 
-	/* nosave data is really only used for software suspend...it's here
-	 * just in case we ever implement it
-	 */
-	. = ALIGN(PAGE_SIZE);
-	__nosave_begin = .;
-	.data_nosave : {
-		*(.data.nosave)
-	}
-	. = ALIGN(PAGE_SIZE);
-	__nosave_end = .;
-
 	/* End of data section */
 	_edata = .;
 
@@ -147,14 +115,6 @@ SECTIONS
 	}
 	__bss_stop = .;
 
-
-	/* assembler code expects init_task to be 16k aligned */
-	. = ALIGN(16384);
-	/* init_task */
-	.data.init_task : {
-		*(.data.init_task)
-	}
-
 #ifdef CONFIG_64BIT
 	. = ALIGN(16);
 	/* Linkage tables */
@@ -172,31 +132,8 @@ SECTIONS
 	/* reserve space for interrupt stack by aligning __init* to 16k */
 	. = ALIGN(16384);
 	__init_begin = .;
-	.init.text : { 
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
+	INIT_TEXT_SECTION(16384)
+	INIT_DATA_SECTION(16)
 
 	/* alternate instruction replacement.  This is a mechanism x86 uses
 	 * to detect the CPU type and replace generic instruction sequences
@@ -222,14 +159,6 @@ SECTIONS
 	.exit.data : {
 		EXIT_DATA
 	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
 
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
-- 
cgit v1.2.3


From ab635e7d499f23a5791e69e2ebbc9a40c9983d89 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:18 -0400
Subject: parisc: Remove useless altinstructions code copied from x86.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/parisc/kernel/vmlinux.lds.S | 25 -------------------------
 1 file changed, 25 deletions(-)

(limited to 'arch')

diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 3fd66d97fca..775be2791bc 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -135,31 +135,6 @@ SECTIONS
 	INIT_TEXT_SECTION(16384)
 	INIT_DATA_SECTION(16)
 
-	/* alternate instruction replacement.  This is a mechanism x86 uses
-	 * to detect the CPU type and replace generic instruction sequences
-	 * with CPU specific ones.  We don't currently do this in PA, but
-	 * it seems like a good idea...
-	 */
-	. = ALIGN(4);
-	.altinstructions : {
-		__alt_instructions = .;
-		*(.altinstructions)
-		__alt_instructions_end = .; 
-	} 
-	.altinstr_replacement : {
-		*(.altinstr_replacement)
-	} 
-
-	/* .exit.text is discard at runtime, not link time, to deal with references
-	 *  from .altinstructions and .eh_frame
-	 */
-	.exit.text : {
-		EXIT_TEXT
-	}
-	.exit.data : {
-		EXIT_DATA
-	}
-
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
-- 
cgit v1.2.3


From cd3db323eb88514c45d25db51335a522560af702 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:19 -0400
Subject: xtensa: Cleanup linker script using new linker script macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/xtensa/kernel/vmlinux.lds.S | 75 ++++++++--------------------------------
 1 file changed, 14 insertions(+), 61 deletions(-)

(limited to 'arch')

diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 921b6ff3b64..9b526154c9b 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -15,6 +15,8 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
 
 #include <variant/core.h>
 #include <platform/hardware.h>
@@ -107,41 +109,18 @@ SECTIONS
 
   .fixup   : { *(.fixup) }
 
-  . = ALIGN(16);
-
-  __ex_table : {
-    __start___ex_table = .;
-    *(__ex_table)
-    __stop___ex_table = .;
-  }
-
+  EXCEPTION_TABLE(16)
   /* Data section */
 
-  . = ALIGN(XCHAL_ICACHE_LINESIZE);
   _fdata = .;
-  .data :
-  {
-    DATA_DATA
-    CONSTRUCTORS
-    . = ALIGN(XCHAL_ICACHE_LINESIZE);
-    *(.data.cacheline_aligned)
-  }
-
+  RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
   _edata = .;
 
-  /* The initial task */
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
-
   /* Initialization code and data: */
 
-  . = ALIGN(1 << 12);
+  . = ALIGN(PAGE_SIZE);
   __init_begin = .;
-  .init.text : {
-  	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
 
   .init.data :
   {
@@ -168,36 +147,15 @@ SECTIONS
 		   .DebugInterruptVector.text);
   
     __boot_reloc_table_end = ABSOLUTE(.) ;
-  }
 
-  . = ALIGN(XCHAL_ICACHE_LINESIZE);
-
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
+    INIT_SETUP(XCHAL_ICACHE_LINESIZE)
+    INIT_CALLS
+    CON_INITCALL
+    SECURITY_INITCALL
+    INIT_RAM_FS
   }
-  __initcall_end = .;
-
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-
-  SECURITY_INIT
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start =.;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  PERCPU(4096)
 
+  PERCPU(PAGE_SIZE)
 
   /* We need this dummy segment here */
 
@@ -252,16 +210,11 @@ SECTIONS
 		  .DoubleExceptionVector.literal)
 
   . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
-  . = ALIGN(1 << 12);
+  . = ALIGN(PAGE_SIZE);
 
   __init_end = .;
 
-  . = ALIGN(8192);
-
-  /* BSS section */
-  _bss_start = .;
-  .bss : { *(.bss.page_aligned) *(.bss) }
-  _bss_end = .;
+  BSS_SECTION(0, 8192, 0)
 
   _end = .;
 
-- 
cgit v1.2.3


From 5d150a97f9391f5bcd7ba0d59d7a11c3de3cea80 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:20 -0400
Subject: um: Clean up linker script using standard macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: user-mode-linux-devel@lists.sourceforge.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/include/asm/common.lds.S | 29 ++++++-----------------------
 arch/um/kernel/dyn.lds.S         |  9 ++-------
 arch/um/kernel/uml.lds.S         | 26 ++++++--------------------
 3 files changed, 14 insertions(+), 50 deletions(-)

(limited to 'arch')

diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index 37ecc5577a9..ac55b9efa1c 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -16,11 +16,7 @@
 
   . = ALIGN(4096);
   .note : { *(.note.*) }
-  __ex_table : {
-	__start___ex_table = .;
-	*(__ex_table)
-	__stop___ex_table = .;
-  }
+  EXCEPTION_TABLE(0)
 
   BUG_TABLE
 
@@ -43,28 +39,17 @@
   }
 	
   .init.setup : {
-	__setup_start = .;
-	*(.init.setup)
-	__setup_end = .;
+	INIT_SETUP(0)
   }
 
-  . = ALIGN(32);
-  .data.percpu : {
-	__per_cpu_start = . ;
-	*(.data.percpu)
-	__per_cpu_end = . ;
-  }
+  PERCPU(32)
 	
   .initcall.init : {
-	__initcall_start = .;
-	INITCALLS
-	__initcall_end = .;
+	INIT_CALLS
   }
 
   .con_initcall.init : {
-	__con_initcall_start = .;
-	*(.con_initcall.init)
-	__con_initcall_end = .;
+	CON_INITCALL
   }
 
   .uml.initcall.init : {
@@ -118,8 +103,6 @@
 
    . = ALIGN(4096);
   .init.ramfs : {
-	__initramfs_start = .;
-	*(.init.ramfs)
-	__initramfs_end = .;
+	INIT_RAM_FS
   }
 
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 715a188c047..7fcad58e216 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -16,11 +16,7 @@ SECTIONS
   _text = .;
   _stext = .;
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
 
   . = ALIGN(PAGE_SIZE);
 
@@ -96,8 +92,7 @@ SECTIONS
   .init_array     : { *(.init_array) }
   .fini_array     : { *(.fini_array) }
   .data           : {
-    . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
     *(.data.init_irqstack)
     DATA_DATA
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 2ebd39765db..e7a6cca667a 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -22,11 +22,7 @@ SECTIONS
   _text = .;
   _stext = .;
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
   . = ALIGN(PAGE_SIZE);
 
   .text      :
@@ -52,8 +48,7 @@ SECTIONS
   init.data : { INIT_DATA }
   .data    :
   {
-    . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
     *(.data.init_irqstack)
     DATA_DATA
@@ -81,19 +76,10 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
   . = ALIGN(PAGE_SIZE);
-  .sbss      :
-  {
-   __bss_start = .;
-   PROVIDE(_bss_start = .);
-   *(.sbss)
-   *(.scommon)
-  }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
+  __bss_start = .;
+  PROVIDE(_bss_start = .);
+  SBSS(0)
+  BSS(0)
   _end = .;
   PROVIDE (end = .);
 
-- 
cgit v1.2.3


From eb121d1f17480793a0d8aa278929976dbb7612f5 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:21 -0400
Subject: h8300: Cleanup linker script using new linker script macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/h8300/kernel/vmlinux.lds.S | 25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 662b02ecb86..b9e24907e6e 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -1,5 +1,6 @@
 #define VMLINUX_SYMBOL(_sym_) _##_sym_
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 /* target memory map */
 #ifdef CONFIG_H8300H_GENERIC
@@ -79,11 +80,8 @@ SECTIONS
 	SCHED_TEXT
 	LOCK_TEXT
 	__etext = . ;
-	. = ALIGN(16);          /* Exception table              */
-	___start___ex_table = .;
-		*(__ex_table)
-	___stop___ex_table = .;
 	}
+	EXCEPTION_TABLE(16)
 
 	RODATA
 #if defined(CONFIG_ROMKERNEL)
@@ -100,8 +98,7 @@ SECTIONS
 	__sdata = . ;
 	___data_start = . ;
 
-	. = ALIGN(0x2000) ;
-		*(.data.init_task)
+	INIT_TASK_DATA(0x2000)
 	. = ALIGN(0x4) ;
 		DATA_DATA
 	. = ALIGN(0x4) ;
@@ -114,24 +111,16 @@ SECTIONS
 	__einittext = .; 
 		INIT_DATA
 	. = ALIGN(0x4) ;
+	INIT_SETUP(0x4)
 	___setup_start = .;
 		*(.init.setup)
 	. = ALIGN(0x4) ;
 	___setup_end = .;
-	___initcall_start = .;
-		INITCALLS
-	___initcall_end = .;
-	___con_initcall_start = .;
-		*(.con_initcall.init)
-	___con_initcall_end = .;
+	INIT_CALLS
+	CON_INITCALL
 		EXIT_TEXT
 		EXIT_DATA
-#if defined(CONFIG_BLK_DEV_INITRD)
-		. = ALIGN(4);
-	___initramfs_start = .;
-  		*(.init.ramfs)
-  	___initramfs_end = .;
-#endif
+	INIT_RAM_FS
 	. = ALIGN(0x4) ;
 	___init_end = .;
 	__edata = . ;
-- 
cgit v1.2.3


From 4295f8b318b424be0f87c9fd9aa1eb35c9585faf Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:22 -0400
Subject: mn10300: Clean up linker script using higher-level macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/vmlinux.lds.S | 40 ++++-----------------------------------
 1 file changed, 4 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 76f41bdb79c..10549dcfb61 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -44,24 +44,8 @@ SECTIONS
   RO_DATA(PAGE_SIZE)
 
   /* writeable */
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	}
-
-  .data_nosave : { NOSAVE_DATA; }
-
-  .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
-  .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
-
-  /* rarely changed data like cpu maps */
-  . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly)) {
-	READ_MOSTLY_DATA(32);
-	_edata = .;		/* End of data section */
-  }
-
-  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
+  RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+  _edata = .;
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
@@ -74,22 +58,8 @@ SECTIONS
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT;
-	_einittext = .;
-  }
-  .init.data : { INIT_DATA; }
-  .setup.init : { INIT_SETUP(16); }
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  .con_initcall.init : { CON_INITCALL; }
-
-  SECURITY_INIT
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
   . = ALIGN(4);
   __alt_instructions = .;
   .altinstructions : { *(.altinstructions) }
@@ -100,8 +70,6 @@ SECTIONS
 	.exit.text : { EXIT_TEXT; }
 	.exit.data : { EXIT_DATA; }
 
-  .init.ramfs : { INIT_RAM_FS; }
-
   PERCPU(32)
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
-- 
cgit v1.2.3


From 4a5e35135d1ffcf14ebb2bb3c730b92c18ae9657 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:23 -0400
Subject: blackfin: Cleanup linker script using new linker script macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: uclinux-dist-devel@blackfin.uclinux.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/blackfin/kernel/vmlinux.lds.S | 56 ++++----------------------------------
 1 file changed, 6 insertions(+), 50 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 21ac7c26079..ffd90fbbc8f 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -96,8 +96,7 @@ SECTIONS
 	{
 		__sdata = .;
 		/* This gets done first, so the glob doesn't suck it in */
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		CACHELINE_ALIGNED_DATA(32)
 
 #if !L1_DATA_A_LENGTH
 		. = ALIGN(32);
@@ -116,12 +115,7 @@ SECTIONS
 		DATA_DATA
 		CONSTRUCTORS
 
-		/* make sure the init_task is aligned to the
-		 * kernel thread size so we can locate the kernel
-		 * stack properly and quickly.
-		 */
-		. = ALIGN(THREAD_SIZE);
-		*(.init_task.data)
+		INIT_TASK_DATA(THREAD_SIZE)
 
 		__edata = .;
 	}
@@ -134,39 +128,10 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 
-	.init.text :
-	{
-		. = ALIGN(PAGE_SIZE);
-		__sinittext = .;
-		INIT_TEXT
-		__einittext = .;
-	}
-	.init.data :
-	{
-		. = ALIGN(16);
-		INIT_DATA
-	}
-	.init.setup :
-	{
-		. = ALIGN(16);
-		___setup_start = .;
-		*(.init.setup)
-		___setup_end = .;
-	}
-	.initcall.init :
-	{
-		___initcall_start = .;
-		INITCALLS
-		___initcall_end = .;
-	}
-	.con_initcall.init :
-	{
-		___con_initcall_start = .;
-		*(.con_initcall.init)
-		___con_initcall_end = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	. = ALIGN(16);
+	INIT_DATA_SECTION(16)
 	PERCPU(4)
-	SECURITY_INIT
 
 	/* we have to discard exit text and such at runtime, not link time, to
 	 * handle embedded cross-section references (alt instructions, bug
@@ -181,18 +146,9 @@ SECTIONS
 		EXIT_DATA
 	}
 
-	.init.ramfs :
-	{
-		. = ALIGN(4);
-		___initramfs_start = .;
-		*(.init.ramfs)
-		. = ALIGN(4);
-		___initramfs_end = .;
-	}
-
 	__l1_lma_start = .;
 
-	.text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
+	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
 	{
 		. = ALIGN(4);
 		__stext_l1 = .;
-- 
cgit v1.2.3


From 62bef288588bee976b753f7168716621d7a984e2 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:24 -0400
Subject: powerpc: Cleanup linker script using new linker script macros.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 69 +++++++++------------------------------
 1 file changed, 15 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 58da4070723..f56429362a1 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
+#include <asm/thread_info.h>
 
 ENTRY(_stext)
 
@@ -71,12 +72,7 @@ SECTIONS
 	/* Read-only data */
 	RODATA
 
-	/* Exception & bug tables */
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(0)
 
 	NOTES :kernel :notes
 
@@ -93,12 +89,7 @@ SECTIONS
  */
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
-
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	} :kernel
+	INIT_TEXT_SECTION(PAGE_SIZE) :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -122,23 +113,16 @@ SECTIONS
 #endif
 	}
 
-	. = ALIGN(16);
 	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
+		INIT_SETUP(16)
 	}
 
 	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-		}
+		INIT_CALLS
+	}
 
 	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 
 	SECURITY_INIT
@@ -169,14 +153,10 @@ SECTIONS
 		__stop___fw_ftr_fixup = .;
 	}
 #endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
 	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
+		INIT_RAM_FS
 	}
-#endif
+
 	PERCPU(PAGE_SIZE)
 
 	. = ALIGN(8);
@@ -240,36 +220,24 @@ SECTIONS
 #endif
 
 	/* The initial task and kernel stack */
-#ifdef CONFIG_PPC32
-	. = ALIGN(8192);
-#else
-	. = ALIGN(16384);
-#endif
 	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-		*(.data.page_aligned)
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-		*(.data.cacheline_aligned)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-		*(.data.read_mostly)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
+		NOSAVE_DATA
 	}
 
 	. = ALIGN(PAGE_SIZE);
@@ -280,14 +248,7 @@ SECTIONS
  * And finally the bss
  */
 
-	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-		__bss_start = .;
-		*(.sbss) *(.scommon)
-		*(.dynbss)
-		*(.bss)
-		*(COMMON)
-		__bss_stop = .;
-	}
+	BSS_SECTION(0, 0, 0)
 
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
-- 
cgit v1.2.3


From ea12c2ed547f415ef9699cc67374d90924592c9b Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:25 -0400
Subject: alpha: use .data.init_task instead of .data.init_thread.

alpha is the only architecture that uses the section name
.data.init_thread instead of .data.init_task.  So convert alpha to use
.data.init_task like everything else.

.data.init_task does not need a separate output section; this change
also moves it into the .data output section.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Richard Henderson <rth@twiddle.net>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/init_task.c   | 5 ++---
 arch/alpha/kernel/vmlinux.lds.S | 7 ++-----
 2 files changed, 4 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/init_task.c b/arch/alpha/kernel/init_task.c
index 19b86328ffd..6f80ca4f976 100644
--- a/arch/alpha/kernel/init_task.c
+++ b/arch/alpha/kernel/init_task.c
@@ -13,6 +13,5 @@ static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
 struct task_struct init_task = INIT_TASK(init_task);
 EXPORT_SYMBOL(init_task);
 
-union thread_union init_thread_union
-	__attribute__((section(".data.init_thread")))
-	= { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 6dc03c35caa..82803df1797 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -1,5 +1,6 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_FORMAT("elf64-alpha")
 OUTPUT_ARCH(alpha)
@@ -92,11 +93,6 @@ SECTIONS
 	__init_end = .;
 	/* Freed after init ends here */
 
-	/* Note 2 page alignment above.  */
-	.data.init_thread : {
-		*(.data.init_thread)
-	}
-
 	. = ALIGN(PAGE_SIZE);
 	.data.page_aligned : {
 		*(.data.page_aligned)
@@ -110,6 +106,7 @@ SECTIONS
 	_data = .;
 	/* Data */
 	.data : {
+		INIT_TASK_DATA(THREAD_SIZE)
 		DATA_DATA
 		CONSTRUCTORS
 	}
-- 
cgit v1.2.3


From 9d93f00580243cc059510d9d6ac4d2f5e97e5b83 Mon Sep 17 00:00:00 2001
From: Geoffrey Thomas <geofft@ksplice.com>
Date: Thu, 24 Sep 2009 10:36:26 -0400
Subject: alpha: Clean up linker script using new linker script macros.

Note that .data.page_aligned and .data.cacheline_aligned are now after
_data; it was probably a bug that they were before it.

Also, some explicit ALIGN(8)'s between various initcall sections were
removed; this should be harmless as the implicit alignment of
initcall_t was already 8.

Signed-off-by: Geoffrey Thomas <geofft@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/vmlinux.lds.S | 90 +++++------------------------------------
 1 file changed, 9 insertions(+), 81 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 82803df1797..2906665b1c1 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -32,84 +32,21 @@ SECTIONS
 	} :kernel
 
 	RODATA
-
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/* Will be freed after init */
-	. = ALIGN(PAGE_SIZE);
-	/* Init code and data */
-	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	. = ALIGN(8);
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
-	. = ALIGN(8);
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-
-	. = ALIGN(8);
-	SECURITY_INIT
-
+	__init_begin = ALIGN(PAGE_SIZE);
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 	PERCPU(PAGE_SIZE)
-
-	. = ALIGN(2 * PAGE_SIZE);
+	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+	   needed for the THREAD_SIZE aligned init_task gets freed after init */
+	. = ALIGN(THREAD_SIZE);
 	__init_end = .;
 	/* Freed after init ends here */
 
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.page_aligned)
-	}
-
-	. = ALIGN(64);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
-
 	_data = .;
-	/* Data */
-	.data : {
-		INIT_TASK_DATA(THREAD_SIZE)
-		DATA_DATA
-		CONSTRUCTORS
-	}
+	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
 
 	.got : {
 		*(.got)
@@ -119,16 +56,7 @@ SECTIONS
 	}
 	_edata = .;	/* End of data section */
 
-	__bss_start = .;
-	.sbss : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
+	BSS_SECTION(0, 0, 0)
 	_end = .;
 
 	.mdebug 0 : {
-- 
cgit v1.2.3


From c775197d59995228909957e9f0ec128de2590682 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Thu, 24 Sep 2009 15:12:00 +0100
Subject: FRV: Flash mappings for the MB93090-MB00 motherboard

Flash mappings for the MB93090-MB00 evaluation motherboard.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/mb93090-mb00/Makefile |  2 +
 arch/frv/mb93090-mb00/flash.c  | 90 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 92 insertions(+)
 create mode 100644 arch/frv/mb93090-mb00/flash.c

(limited to 'arch')

diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile
index 76595e87073..b73b542f8f4 100644
--- a/arch/frv/mb93090-mb00/Makefile
+++ b/arch/frv/mb93090-mb00/Makefile
@@ -11,3 +11,5 @@ else
 obj-y += pci-dma-nommu.o
 endif
 endif
+
+obj-$(CONFIG_MTD) += flash.o
diff --git a/arch/frv/mb93090-mb00/flash.c b/arch/frv/mb93090-mb00/flash.c
new file mode 100644
index 00000000000..c0e3707c229
--- /dev/null
+++ b/arch/frv/mb93090-mb00/flash.c
@@ -0,0 +1,90 @@
+/* Flash mappings for the MB93090-MB00 motherboard
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define MB93090_BOOTROM_ADDR	0xFF000000	/* Boot ROM */
+#define MB93090_BOOTROM_SIZE	(2 * 1024 * 1024)
+#define MB93090_USERROM_ADDR	0xFF200000	/* User ROM */
+#define MB93090_USERROM_SIZE	(2 * 1024 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition mb93090_partitions[] = {
+	{
+		.name		= "Filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+	}
+};
+
+/*
+ * Definition of the MB93090 Boot ROM (on the CPU card)
+ */
+static struct physmap_flash_data mb93090_bootrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_bootrom_resource = {
+	.start		= MB93090_BOOTROM_ADDR,
+	.end		= MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_bootrom = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev.platform_data = &mb93090_bootrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_bootrom_resource,
+};
+
+/*
+ * Definition of the MB93090 User ROM definition (on the motherboard)
+ */
+static struct physmap_flash_data mb93090_userrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_userrom_resource = {
+	.start		= MB93090_USERROM_ADDR,
+	.end		= MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_userrom = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.dev.platform_data = &mb93090_userrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_userrom_resource,
+};
+
+/*
+ * register the MB93090 flashes
+ */
+static int __init mb93090_mtd_init(void)
+{
+	platform_device_register(&mb93090_bootrom);
+	platform_device_register(&mb93090_userrom);
+	return 0;
+}
+
+module_init(mb93090_mtd_init);
-- 
cgit v1.2.3


From 3e9ad52b95e259e68c7dcb69a25d58047ed51094 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Date: Fri, 21 Aug 2009 01:24:54 +0000
Subject: sh: add FSI driver support for ms7724se

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-se/7724/setup.c | 89 +++++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 00973e0f8c6..e78c3be8ad2 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -22,6 +22,7 @@
 #include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
+#include <sound/sh_fsi.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
@@ -255,6 +256,65 @@ static struct platform_device ceu1_device = {
 	},
 };
 
+/* FSI */
+/*
+ * FSI-A use external clock which came from ak464x.
+ * So, we should change parent of fsi
+ */
+#define FCLKACR		0xa4150008
+static void fsimck_init(struct clk *clk)
+{
+	u32 status = ctrl_inl(clk->enable_reg);
+
+	/* use external clock */
+	status &= ~0x000000ff;
+	status |= 0x00000080;
+	ctrl_outl(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+	.init = fsimck_init,
+};
+
+static struct clk fsimcka_clk = {
+	.name		= "fsimcka_clk",
+	.id		= -1,
+	.ops		= &fsimck_clk_ops,
+	.enable_reg	= (void __iomem *)FCLKACR,
+	.rate		= 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+	.porta_flags = SH_FSI_BRS_INV |
+		       SH_FSI_OUT_SLAVE_MODE |
+		       SH_FSI_IN_SLAVE_MODE |
+		       SH_FSI_OFMT(PCM) |
+		       SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 108,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
@@ -399,6 +459,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&sh_eth_device,
 	&sh7724_usb0_host_device,
 	&sh7724_usb1_gadget_device,
+	&fsi_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -466,11 +527,13 @@ static void __init sh_eth_init(void)
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+	struct clk *fsia_clk;
 
 	/* Reset Release */
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
+		    (1 << 7)  | /* AK4643 */
 		    (1 << 12) | /* USB0 */
 		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
@@ -609,6 +672,32 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKB,    NULL);
+	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIOASD,    NULL);
+	gpio_request(GPIO_FN_FSIIABCK,   NULL);
+	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOABCK,   NULL);
+	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+	gpio_request(GPIO_FN_FSIIBSD,    NULL);
+	gpio_request(GPIO_FN_FSIOBSD,    NULL);
+	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
+
+	/* change parent of FSI A */
+	fsia_clk = clk_get(NULL, "fsia_clk");
+	clk_register(&fsimcka_clk);
+	clk_set_parent(fsia_clk, &fsimcka_clk);
+	clk_set_rate(fsia_clk, 11000);
+	clk_set_rate(&fsimcka_clk, 11000);
+	clk_put(fsia_clk);
+
 	/*
 	 * enable SH-Eth
 	 *
-- 
cgit v1.2.3


From 5d65498b09316c744609617ffd7d59dbc18c7031 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 25 Sep 2009 11:53:02 +0900
Subject: sh: update defconfigs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/ap325rxa_defconfig          | 100 +++--
 arch/sh/configs/dreamcast_defconfig         |  82 ++--
 arch/sh/configs/ecovec24-romimage_defconfig |  52 +--
 arch/sh/configs/ecovec24_defconfig          |  70 ++--
 arch/sh/configs/edosk7705_defconfig         |  50 ++-
 arch/sh/configs/edosk7760_defconfig         |  82 ++--
 arch/sh/configs/espt_defconfig              |  75 ++--
 arch/sh/configs/hp6xx_defconfig             |  69 +++-
 arch/sh/configs/kfr2r09-romimage_defconfig  |  47 +--
 arch/sh/configs/kfr2r09_defconfig           |  50 ++-
 arch/sh/configs/landisk_defconfig           |  86 +++--
 arch/sh/configs/lboxre2_defconfig           |  86 +++--
 arch/sh/configs/magicpanelr2_defconfig      |  85 +++--
 arch/sh/configs/microdev_defconfig          |  74 +++-
 arch/sh/configs/migor_defconfig             | 111 ++++--
 arch/sh/configs/polaris_defconfig           |  73 ++--
 arch/sh/configs/r7780mp_defconfig           | 116 ++++--
 arch/sh/configs/r7785rp_defconfig           | 125 +++++--
 arch/sh/configs/rsk7201_defconfig           |  60 ++-
 arch/sh/configs/rsk7203_defconfig           |  81 ++--
 arch/sh/configs/rts7751r2d1_defconfig       |  97 +++--
 arch/sh/configs/rts7751r2dplus_defconfig    | 100 +++--
 arch/sh/configs/sdk7780_defconfig           |  93 +++--
 arch/sh/configs/se7206_defconfig            |  80 ++--
 arch/sh/configs/se7343_defconfig            |  91 +++--
 arch/sh/configs/se7619_defconfig            |  56 ++-
 arch/sh/configs/se7705_defconfig            |  75 ++--
 arch/sh/configs/se7712_defconfig            |  79 ++--
 arch/sh/configs/se7721_defconfig            |  86 +++--
 arch/sh/configs/se7722_defconfig            |  92 +++--
 arch/sh/configs/se7724_defconfig            | 264 ++++++++++---
 arch/sh/configs/se7750_defconfig            |  75 ++--
 arch/sh/configs/se7751_defconfig            |  74 ++--
 arch/sh/configs/se7780_defconfig            |  89 +++--
 arch/sh/configs/sh03_defconfig              |  87 +++--
 arch/sh/configs/sh7710voipgw_defconfig      |  71 ++--
 arch/sh/configs/sh7724_generic_defconfig    |  64 +++-
 arch/sh/configs/sh7763rdp_defconfig         |  79 ++--
 arch/sh/configs/sh7770_generic_defconfig    |  62 ++-
 arch/sh/configs/sh7785lcr_32bit_defconfig   | 559 +++++++++++++++++++---------
 arch/sh/configs/sh7785lcr_defconfig         | 107 ++++--
 arch/sh/configs/shmin_defconfig             |  68 ++--
 arch/sh/configs/shx3_defconfig              |  95 +++--
 arch/sh/configs/snapgear_defconfig          |  40 +-
 arch/sh/configs/systemh_defconfig           |  61 ++-
 arch/sh/configs/titan_defconfig             |  93 +++--
 arch/sh/configs/ul2_defconfig               | 104 ++++--
 arch/sh/configs/urquell_defconfig           | 125 +++++--
 48 files changed, 3269 insertions(+), 1271 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 6c38a43594f..2f78d01cc6c 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:04:11 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:22:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -51,11 +60,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,18 +98,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -107,6 +118,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +134,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,7 +150,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -169,6 +184,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 CONFIG_CPU_SUBTYPE_SH7723=y
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 
 #
@@ -316,7 +334,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -364,6 +388,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -393,6 +418,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -400,7 +426,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -413,6 +438,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +448,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -480,6 +506,7 @@ CONFIG_MTD_PHYSMAP=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -583,7 +610,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -637,12 +663,10 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -726,6 +750,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -736,6 +761,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -757,9 +783,6 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -780,6 +803,11 @@ CONFIG_SPI_GPIO=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -804,11 +832,15 @@ CONFIG_GPIOLIB=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -828,8 +860,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -957,6 +993,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -992,6 +1030,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1003,6 +1042,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1056,8 +1096,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1122,7 +1164,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1202,6 +1243,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1212,8 +1254,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1221,6 +1266,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1234,7 +1280,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1275,11 +1320,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1341,5 +1388,6 @@ CONFIG_CRC7=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 95717a041ed..aedbd4f1304 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:24:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:07 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -86,19 +96,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -108,6 +119,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -120,7 +135,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +182,7 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -218,6 +234,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -322,7 +339,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
 
 #
@@ -395,6 +413,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -424,6 +443,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -431,7 +451,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -444,6 +463,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -496,7 +516,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -561,10 +585,7 @@ CONFIG_8139TOO=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -605,13 +626,14 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_MAPLE=y
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -675,11 +697,15 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -716,6 +742,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -807,7 +834,6 @@ CONFIG_LOGO_SUPERH_CLUT224=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -861,8 +887,10 @@ CONFIG_RTC_LIB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -922,7 +950,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -949,6 +976,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -958,8 +986,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -967,6 +998,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -980,7 +1012,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1012,11 +1043,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1079,5 +1112,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
index 9a22c64775b..0774924623c 100644
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Tue Sep  8 13:56:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -59,11 +59,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -79,15 +80,9 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -107,20 +102,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -237,6 +231,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -319,7 +314,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
@@ -382,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -422,6 +419,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -530,10 +528,7 @@ CONFIG_SH_ETH=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -625,6 +620,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -657,9 +653,6 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -693,11 +686,14 @@ CONFIG_GPIO_SYSFS=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -717,6 +713,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -771,6 +768,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -875,6 +873,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
@@ -975,6 +974,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -989,7 +989,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 2050a76683c..ac6469718a2 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Wed Aug 26 09:09:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:45:39 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -60,11 +60,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -97,20 +98,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -232,6 +232,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +315,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
 
 #
@@ -388,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -417,6 +420,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -424,7 +428,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -437,6 +440,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -446,9 +450,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -504,6 +508,7 @@ CONFIG_MTD_PHYSMAP=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -666,10 +671,7 @@ CONFIG_SH_ETH=y
 # CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -713,11 +715,15 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
@@ -771,6 +777,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -804,9 +811,6 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -856,11 +860,15 @@ CONFIG_GPIOLIB=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -880,8 +888,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -936,8 +946,10 @@ CONFIG_SOC_CAMERA=y
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_V4L_USB_DRIVERS is not set
 CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
 # CONFIG_USB_MR800 is not set
 # CONFIG_RADIO_TEA5764 is not set
 # CONFIG_DAB is not set
@@ -1003,7 +1015,6 @@ CONFIG_LOGO_SUPERH_CLUT224=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1026,6 +1037,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1070,6 +1082,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -1161,6 +1174,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1208,6 +1223,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1265,6 +1281,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1329,7 +1346,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1409,6 +1425,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1423,7 +1440,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1446,7 +1463,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1487,11 +1503,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index 497414c439f..86c9bc05062 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:35 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,17 +39,24 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
@@ -70,18 +80,19 @@ CONFIG_EMBEDDED=y
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -89,6 +100,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
@@ -125,6 +140,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,7 +181,6 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -173,6 +188,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -250,7 +266,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -321,11 +338,14 @@ CONFIG_HAVE_IDE=y
 # CONFIG_R3964 is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -409,6 +429,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -416,8 +437,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -425,6 +449,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -449,4 +474,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 77684ed9127..4c0f82b7def 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:55 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:30 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="_edosk7760"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -51,11 +60,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -91,19 +101,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -112,6 +123,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -124,7 +139,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -171,6 +186,7 @@ CONFIG_CPU_SUBTYPE_SH7760=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -216,6 +232,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -304,7 +321,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x02000000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
 
 #
@@ -367,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -396,6 +415,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -403,7 +423,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -416,6 +435,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -426,9 +446,9 @@ CONFIG_DEBUG_DEVRES=y
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -563,10 +583,7 @@ CONFIG_SMC91X=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -649,6 +666,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -659,6 +677,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH7760=y
 # CONFIG_I2C_SH_MOBILE is not set
@@ -680,20 +699,21 @@ CONFIG_I2C_SH7760=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -712,8 +732,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -837,8 +859,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -900,7 +924,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -974,6 +997,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1010,18 +1034,23 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1029,6 +1058,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1045,11 +1075,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1064,7 +1094,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -1100,11 +1129,13 @@ CONFIG_CRYPTO_HASH2=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1168,5 +1199,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index 881128eeab3..9b785517abc 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:27:21 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:58:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,19 +102,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +142,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +232,6 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +239,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +321,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
 
 #
@@ -371,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +432,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -421,9 +442,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -477,6 +498,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -554,7 +576,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -610,10 +631,7 @@ CONFIG_SH_ETH=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -705,11 +723,15 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -819,6 +841,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -888,6 +911,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -930,8 +954,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -997,7 +1023,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1071,6 +1096,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1082,11 +1108,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1096,6 +1126,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1109,7 +1140,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1141,11 +1171,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1208,5 +1240,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 3249d46fdc1..f59be446f82 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:12 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:59:45 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
@@ -46,11 +55,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,18 +91,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -100,6 +111,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -107,7 +122,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,6 +169,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -199,6 +215,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -288,7 +305,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -322,6 +340,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
 # CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
@@ -390,7 +409,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -399,6 +417,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -428,13 +447,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_HP6XX=y
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -452,6 +472,7 @@ CONFIG_TOUCHSCREEN_HP600=y
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -507,11 +528,15 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -663,7 +688,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -725,7 +752,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -782,6 +808,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -791,8 +818,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -800,6 +830,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -813,7 +844,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -854,11 +884,13 @@ CONFIG_CRYPTO_PCBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -920,4 +952,5 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
index c0f9263e138..02590e127f7 100644
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:09:16 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:01:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -58,11 +58,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -78,15 +79,9 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -106,20 +101,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -173,6 +167,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -219,6 +214,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -301,7 +297,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 quiet"
 
 #
@@ -324,6 +321,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -362,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -402,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -489,6 +489,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -520,9 +521,6 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -556,11 +554,14 @@ CONFIG_GPIO_SYSFS=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -580,6 +581,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -718,6 +720,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -732,7 +735,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index cef61319d2f..e12ce538fd4 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 21:58:52 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:03:26 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -60,11 +60,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -102,20 +103,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -190,6 +190,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -236,6 +237,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -319,7 +321,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
 
 #
@@ -343,6 +346,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -383,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -423,6 +428,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -432,9 +438,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -564,11 +570,15 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
@@ -621,6 +631,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -653,9 +664,6 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -689,11 +697,14 @@ CONFIG_GPIO_SYSFS=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -713,6 +724,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -856,6 +868,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -941,6 +955,7 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1002,6 +1017,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1016,7 +1032,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index ba05739fda2..c2a9a399638 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:45 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:05:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,19 +93,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -116,7 +131,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -208,6 +224,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -411,6 +429,7 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -442,6 +461,7 @@ CONFIG_ATALK=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -449,7 +469,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -462,6 +481,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -631,6 +651,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -653,7 +674,11 @@ CONFIG_MD_RAID1=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -729,6 +754,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -754,10 +780,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -868,10 +891,20 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -886,9 +919,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -910,6 +941,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -928,11 +960,11 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -961,6 +993,7 @@ CONFIG_HID_CYPRESS=m
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
@@ -1011,6 +1044,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1177,8 +1211,10 @@ CONFIG_REISERFS_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1251,7 +1287,6 @@ CONFIG_ROMFS_ON_BLOCK=y
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1331,6 +1366,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1340,8 +1376,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1350,6 +1389,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1363,7 +1403,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1395,11 +1434,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1462,5 +1503,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index c0bc2fd033b..ec0c0b432c7 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:29:50 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:09:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,19 +93,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -116,7 +131,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +178,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -208,6 +224,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 
 #
@@ -411,6 +429,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -440,6 +459,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -447,7 +467,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -460,6 +479,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -572,12 +592,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -599,6 +621,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -627,6 +650,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -645,7 +669,11 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -725,6 +753,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -750,10 +779,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -863,10 +889,20 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -881,9 +917,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -905,6 +939,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -923,7 +958,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1021,8 +1055,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1089,7 +1125,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1155,6 +1190,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1164,8 +1200,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1174,6 +1213,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1187,7 +1227,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1219,11 +1258,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1286,5 +1327,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index c5859e82d91..79091e3e32c 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:30:31 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:10:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@ CONFIG_AUDIT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
@@ -91,18 +101,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -306,7 +323,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -368,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -397,6 +416,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -404,7 +424,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -417,6 +436,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -428,9 +448,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -589,10 +609,7 @@ CONFIG_SMSC911X=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -631,13 +648,15 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -701,6 +720,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -721,11 +745,14 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -829,8 +856,10 @@ CONFIG_JBD=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -900,7 +929,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -976,6 +1004,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1006,24 +1035,30 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1036,16 +1071,15 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1077,5 +1111,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e5a21e1d625..6bb5976aff2 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:31:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:14:35 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,11 +58,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -87,18 +97,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -106,6 +117,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +175,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH4_202=y
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -211,6 +227,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 
 #
@@ -364,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -393,6 +412,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -400,7 +420,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -413,6 +432,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -499,10 +519,7 @@ CONFIG_SMC91X=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -561,10 +578,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -575,9 +602,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -662,8 +687,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -726,12 +753,12 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -803,6 +830,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -812,8 +840,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -821,6 +852,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -834,7 +866,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -875,11 +906,13 @@ CONFIG_CRYPTO_ECB=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -943,5 +976,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index b18cfd39cac..65018283c3a 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:17:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,19 +99,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -111,6 +123,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -122,7 +139,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,7 +155,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -173,6 +190,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +242,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -308,7 +327,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
@@ -328,7 +348,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -376,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -406,6 +433,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -414,7 +442,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -427,6 +454,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -436,9 +464,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -585,7 +613,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -621,10 +648,7 @@ CONFIG_SMC91X=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -659,14 +683,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -715,6 +744,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -725,6 +755,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -746,15 +777,17 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -777,11 +810,14 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -801,8 +837,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -922,7 +960,6 @@ CONFIG_LOGO_SUPERH_VGA16=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -952,13 +989,13 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
-CONFIG_SUPERH_BUILT_IN_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
@@ -1017,6 +1054,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1064,8 +1102,10 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1126,7 +1166,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1161,6 +1200,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1172,11 +1212,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1188,6 +1232,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1201,7 +1246,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER2=y
@@ -1240,11 +1284,13 @@ CONFIG_CRYPTO_WORKQUEUE=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1308,5 +1354,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index 67edd3f3f9b..7fc1952419a 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:33:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:20:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@ CONFIG_AUDIT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -91,18 +101,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -302,7 +319,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
 
 #
@@ -363,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +422,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -414,9 +434,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -577,10 +597,7 @@ CONFIG_SMSC911X=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -666,11 +683,15 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -770,8 +791,10 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -841,7 +864,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -877,6 +899,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -916,18 +939,23 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -935,6 +963,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -947,16 +976,15 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4000150
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -987,5 +1015,6 @@ CONFIG_ZLIB_DEFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 107a8e337ec..903b021e8d9 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:34:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:24:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,20 +102,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -115,6 +127,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -126,7 +143,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -174,6 +191,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -229,6 +247,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -315,7 +334,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -396,6 +416,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -428,6 +449,7 @@ CONFIG_LLC=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -436,7 +458,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -449,6 +470,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -460,9 +482,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -513,6 +535,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -651,11 +674,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -677,6 +702,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -704,6 +730,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -722,7 +749,11 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -804,6 +835,7 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -829,10 +861,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -873,13 +902,17 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -933,6 +966,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -961,6 +995,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -987,19 +1022,26 @@ CONFIG_I2C_HIGHLANDER=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1049,6 +1091,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1060,7 +1103,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -1081,14 +1123,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1101,11 +1146,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1169,6 +1214,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1221,8 +1267,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1289,12 +1337,12 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1370,6 +1418,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1404,21 +1453,27 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1427,6 +1482,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1445,11 +1501,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1464,7 +1520,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1506,11 +1561,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1573,5 +1630,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 8a3dc300db4..27ff46c13a8 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:37:20 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:29:23 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,10 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,6 +44,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -56,12 +65,12 @@ CONFIG_AUDIT_TREE=y
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,20 +102,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -117,6 +128,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -129,7 +145,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -178,6 +194,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -231,7 +248,6 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -239,6 +255,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -338,7 +355,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -419,6 +437,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -452,6 +471,7 @@ CONFIG_LLC=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -460,7 +480,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -473,6 +492,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -591,11 +611,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -617,6 +639,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -644,6 +667,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -662,7 +686,11 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -721,6 +749,7 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -746,10 +775,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -790,14 +816,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -851,6 +882,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -879,6 +911,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
@@ -906,15 +939,17 @@ CONFIG_I2C_HIGHLANDER=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -935,14 +970,24 @@ CONFIG_GPIOLIB=y
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -993,6 +1038,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1004,9 +1050,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1026,14 +1070,17 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1099,11 +1146,11 @@ CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1167,6 +1214,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1219,8 +1267,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1286,12 +1336,12 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1367,6 +1417,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1401,22 +1452,29 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1425,6 +1483,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1442,11 +1501,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1461,7 +1520,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1503,11 +1561,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1571,5 +1631,6 @@ CONFIG_AUDIT_GENERIC=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 55c3656a75c..c40db12e9ad 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:39:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:34:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -45,11 +54,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -86,19 +96,21 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +134,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@ CONFIG_CPU_SUBTYPE_SH7201=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -285,7 +303,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
 #
@@ -309,6 +328,7 @@ CONFIG_BINFMT_SHARED_FLAT=y
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 # CONFIG_NET is not set
@@ -327,9 +347,9 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -498,6 +518,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -597,7 +622,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -632,7 +659,6 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -668,7 +694,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -686,6 +711,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -698,11 +724,15 @@ CONFIG_STACKTRACE=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -712,6 +742,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -741,4 +772,5 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 69e619967b7..5cabdb3a84f 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:40:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:35:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -50,11 +59,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,19 +103,21 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +141,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -172,6 +189,7 @@ CONFIG_CPU_SUBTYPE_SH7203=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -308,7 +326,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
 #
@@ -332,6 +351,7 @@ CONFIG_BINFMT_SHARED_FLAT=y
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
@@ -373,6 +393,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +424,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -410,7 +432,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -432,9 +453,9 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -591,10 +612,7 @@ CONFIG_SMSC911X=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -679,6 +697,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -699,6 +722,10 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -741,7 +768,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -764,6 +790,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -811,6 +838,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -954,8 +982,10 @@ CONFIG_RTC_DRV_SH=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -990,7 +1020,6 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -1016,7 +1045,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1090,6 +1118,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1129,22 +1158,28 @@ CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1152,6 +1187,7 @@ CONFIG_FTRACE=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1170,10 +1206,10 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
 CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_BOOTMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1203,5 +1239,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index c6e9b1c0fa3..f521e82cc19 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:42:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:36:25 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,20 +94,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +135,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +228,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +322,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
 
 #
@@ -378,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -408,6 +429,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -416,7 +438,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -429,6 +450,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -542,11 +564,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -568,6 +592,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -595,6 +620,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -613,7 +639,11 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -673,6 +703,7 @@ CONFIG_8139TOO=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -694,6 +725,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -719,10 +751,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -840,10 +869,20 @@ CONFIG_SPI_SH_SCI=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -862,9 +901,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -880,12 +917,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -969,6 +1009,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1071,7 +1112,6 @@ CONFIG_SOUND_PRIME=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1094,6 +1134,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1142,6 +1183,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1213,6 +1255,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1252,6 +1295,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1293,8 +1337,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1357,7 +1403,6 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1423,6 +1468,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1434,11 +1480,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1450,6 +1500,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1463,7 +1514,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1495,11 +1545,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1562,5 +1614,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index bc10469d31f..a156cd1e061 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:19 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:39:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,20 +94,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +135,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +228,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +322,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
 
 #
@@ -378,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -408,6 +429,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -416,7 +438,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -429,6 +450,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -438,9 +460,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -499,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -627,11 +650,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -653,6 +678,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -680,6 +706,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -698,7 +725,11 @@ CONFIG_PATA_PLATFORM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -758,6 +789,7 @@ CONFIG_8139TOO=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -779,6 +811,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -804,10 +837,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -925,10 +955,20 @@ CONFIG_SPI_SH_SCI=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -947,9 +987,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -965,12 +1003,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1054,6 +1095,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1156,7 +1198,6 @@ CONFIG_SOUND_PRIME=m
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1179,6 +1220,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1227,6 +1269,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1298,6 +1341,7 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1337,6 +1381,7 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1378,8 +1423,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1443,7 +1490,6 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1509,6 +1555,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1520,11 +1567,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1536,6 +1587,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1549,7 +1601,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1581,11 +1632,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1648,5 +1701,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 753fb276e9f..055536b5c5c 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:40:25 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="_SDK7780"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -88,20 +98,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -110,6 +121,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -122,7 +137,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -225,6 +241,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +331,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x01800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
 
 #
@@ -435,6 +453,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -496,6 +515,7 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -503,7 +523,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -516,6 +535,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -677,12 +697,14 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -704,6 +726,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -732,6 +755,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -760,7 +784,11 @@ CONFIG_BLK_DEV_DM=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -804,10 +832,7 @@ CONFIG_SMC91X=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -862,12 +887,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -875,6 +901,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -947,6 +974,11 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -954,7 +986,6 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -986,6 +1017,7 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1072,11 +1104,11 @@ CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1099,6 +1131,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1149,6 +1182,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1278,6 +1312,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1345,7 +1380,6 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1425,6 +1459,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1461,18 +1496,23 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1480,6 +1520,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1495,11 +1536,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1514,7 +1555,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -1550,11 +1590,13 @@ CONFIG_CRYPTO_HASH2=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1617,5 +1659,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 8dd2f130e49..1cd1777aa43 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:46:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:45:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -53,12 +62,12 @@ CONFIG_AUDIT_TREE=y
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -105,19 +114,21 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -126,6 +137,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +153,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -185,6 +201,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -319,7 +336,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 
 #
@@ -389,6 +407,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -419,6 +438,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -426,7 +446,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -448,9 +467,9 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -588,10 +607,7 @@ CONFIG_SMC91X=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -647,11 +663,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -746,8 +766,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -782,8 +804,6 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
 CONFIG_MISC_FILESYSTEMS=y
@@ -809,7 +829,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -846,6 +865,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -882,20 +902,27 @@ CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -904,6 +931,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -920,10 +948,10 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -938,7 +966,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -974,11 +1001,13 @@ CONFIG_CRYPTO_HASH2=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1046,5 +1075,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 18f46debf92..5531444b808 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:46:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,18 +98,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -108,6 +119,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +134,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,7 +150,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -169,6 +184,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,6 +230,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
@@ -316,7 +334,12 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -360,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -389,6 +413,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -396,7 +421,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,9 +442,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -560,10 +584,7 @@ CONFIG_NETDEVICES=y
 CONFIG_MII=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -671,6 +692,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -681,6 +703,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -702,20 +725,21 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -734,8 +758,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -788,6 +814,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -822,7 +849,6 @@ CONFIG_SND_USB=y
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -845,6 +871,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -877,6 +904,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -891,6 +919,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OXU210HP_HCD is not set
 CONFIG_USB_ISP116X_HCD=y
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -990,8 +1019,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1028,8 +1059,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -1062,7 +1091,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1140,6 +1168,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1149,8 +1178,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1160,6 +1192,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1173,7 +1206,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1205,11 +1237,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1273,5 +1307,6 @@ CONFIG_ZLIB_DEFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 724bb77c9dc..6921b199b1d 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:05 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,17 +40,24 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -73,31 +83,36 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,6 +159,7 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -262,7 +278,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -469,11 +486,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -507,7 +528,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -559,7 +579,9 @@ CONFIG_RTC_LIB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -594,7 +616,6 @@ CONFIG_INOTIFY_USER=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
@@ -619,7 +640,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -637,6 +657,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -645,8 +666,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -654,6 +678,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -680,4 +705,5 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 6ca6a2fc06e..3abb06879f0 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:48:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:52 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -48,11 +57,12 @@ CONFIG_LOCALVERSION_AUTO=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,18 +93,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -102,6 +113,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +175,7 @@ CONFIG_CPU_SUBTYPE_SH7705=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -205,6 +221,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -289,7 +306,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -355,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -384,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -391,7 +411,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -409,9 +428,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -547,10 +566,7 @@ CONFIG_STNIC=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -642,10 +658,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -656,9 +682,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -692,7 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -746,7 +769,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -815,7 +840,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -849,6 +873,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -857,8 +882,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -866,6 +894,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -878,7 +907,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -910,11 +938,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -979,5 +1009,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index b8aae11bc8f..1a43cfecb39 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:49:00 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:53:32 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,6 +39,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,18 +94,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -291,7 +308,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -368,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -433,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -440,7 +460,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -464,9 +483,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -597,7 +616,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -605,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -658,10 +677,7 @@ CONFIG_SH_ETH=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -719,11 +735,15 @@ CONFIG_HW_RANDOM=m
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -828,8 +848,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -866,8 +888,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -900,7 +920,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -935,6 +954,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -964,24 +984,30 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -994,14 +1020,13 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1016,7 +1041,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1059,11 +1083,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1127,5 +1153,6 @@ CONFIG_ZLIB_DEFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index 306e21c4253..b8a3c8c4bac 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:50:49 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:11 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,18 +99,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -109,6 +120,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -120,7 +135,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +182,7 @@ CONFIG_CPU_SUBTYPE_SH7721=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -212,6 +228,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
 
 #
@@ -373,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -438,6 +457,7 @@ CONFIG_NET_SCH_FIFO=y
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -445,7 +465,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -469,9 +488,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -606,6 +625,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -621,10 +641,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -672,12 +689,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -725,6 +743,11 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -762,7 +785,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -785,6 +807,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -831,6 +854,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -900,6 +924,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -961,8 +986,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1002,8 +1029,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -1036,7 +1061,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1095,6 +1119,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1124,24 +1149,30 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1154,14 +1185,13 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1176,7 +1206,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1219,11 +1248,13 @@ CONFIG_CRYPTO_CBC=y
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1287,5 +1318,6 @@ CONFIG_ZLIB_DEFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 61943829984..d709b7f35ac 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:54:24 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,19 +101,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -113,6 +124,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +141,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,7 +157,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -176,6 +192,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -233,6 +250,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -317,7 +335,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -336,7 +355,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -381,6 +406,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -410,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -417,7 +444,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -430,6 +456,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -494,7 +521,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -502,6 +528,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -535,10 +562,7 @@ CONFIG_SMC91X=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -577,12 +601,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -631,10 +656,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -645,9 +680,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -681,7 +714,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -778,8 +810,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -839,7 +873,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -866,6 +899,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -878,8 +912,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -889,6 +926,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -902,7 +940,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -934,11 +971,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1002,5 +1041,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3ee783a0a07..56b0b9ff9e0 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Mon Jun 29 16:28:43 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:50:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -42,6 +42,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -54,11 +60,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -91,20 +98,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -144,7 +150,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -178,6 +184,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +231,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -249,6 +257,8 @@ CONFIG_CPU_HAS_FPU=y
 #
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_7724_SOLUTION_ENGINE=y
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
 
 #
 # Timer and clock configuration
@@ -269,7 +279,10 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=12
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
 
 #
 # Companion Chips
@@ -305,7 +318,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
 
 #
@@ -325,7 +339,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -373,6 +393,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -402,6 +423,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -409,7 +431,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -422,6 +443,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -431,9 +453,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -489,6 +511,7 @@ CONFIG_MTD_PHYSMAP=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -648,12 +671,10 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -697,14 +718,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -754,6 +780,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -764,6 +791,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -786,9 +814,6 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -838,11 +863,15 @@ CONFIG_GPIOLIB=y
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -862,8 +891,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -876,24 +907,24 @@ CONFIG_VIDEO_DEV=y
 CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER=m
 # CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEOBUF_GEN=y
 CONFIG_VIDEOBUF_DMA_CONTIG=y
@@ -904,6 +935,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
 CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
@@ -919,15 +951,18 @@ CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
 CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
 # CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
 # CONFIG_USB_GSPCA_CONEX is not set
 # CONFIG_USB_GSPCA_ETOMS is not set
 # CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
 # CONFIG_USB_GSPCA_MARS is not set
 # CONFIG_USB_GSPCA_MR97310A is not set
 # CONFIG_USB_GSPCA_OV519 is not set
 # CONFIG_USB_GSPCA_OV534 is not set
 # CONFIG_USB_GSPCA_PAC207 is not set
 # CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
 # CONFIG_USB_GSPCA_SONIXB is not set
 # CONFIG_USB_GSPCA_SONIXJ is not set
 # CONFIG_USB_GSPCA_SPCA500 is not set
@@ -957,6 +992,26 @@ CONFIG_USB_PWC_INPUT_EVDEV=y
 # CONFIG_USB_STKWEBCAM is not set
 # CONFIG_USB_S2255 is not set
 # CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
 # CONFIG_DAB is not set
 
 #
@@ -1017,10 +1072,80 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_FSI_AK4642=y
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_SND_SOC_WM_HUBS=m
+CONFIG_SND_SOC_AD1836=m
+CONFIG_SND_SOC_AD1938=m
+CONFIG_SND_SOC_AD73311=m
+CONFIG_SND_SOC_AK4104=m
+CONFIG_SND_SOC_AK4535=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_PCM3008=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_SSM2602=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC26=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_UDA1380=m
+CONFIG_SND_SOC_WM8510=m
+CONFIG_SND_SOC_WM8523=m
+CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8728=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8750=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_WM8776=m
+CONFIG_SND_SOC_WM8900=m
+CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8940=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8961=m
+CONFIG_SND_SOC_WM8971=m
+CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8988=m
+CONFIG_SND_SOC_WM8990=m
+CONFIG_SND_SOC_WM8993=m
+CONFIG_SND_SOC_WM9081=m
+CONFIG_SND_SOC_MAX9877=m
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1043,6 +1168,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1072,6 +1198,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -1086,9 +1213,11 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1151,9 +1280,46 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 
 #
 # OTG and related infrastructure
@@ -1176,6 +1342,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1223,6 +1391,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1279,6 +1448,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1343,7 +1513,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1423,6 +1592,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1433,8 +1603,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1442,6 +1615,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1455,7 +1629,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1496,11 +1669,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1562,5 +1737,6 @@ CONFIG_CRC7=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index 564bf7bdce6..7bc926c17b7 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:00:01 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:58:58 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -84,18 +94,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@ CONFIG_CPU_SUBTYPE_SH7750=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -291,7 +308,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -358,6 +376,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -387,6 +406,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -394,7 +414,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -412,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -563,7 +582,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -599,10 +617,7 @@ CONFIG_STNIC=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -665,10 +680,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -679,9 +704,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -766,8 +789,10 @@ CONFIG_RTC_LIB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -838,7 +863,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -885,6 +909,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -894,8 +919,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -903,6 +931,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -916,7 +945,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -948,11 +976,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1016,5 +1046,6 @@ CONFIG_ZLIB_DEFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index eb431c43e99..c20ae5e35c8 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:02:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:01:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -87,18 +97,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -107,6 +118,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +133,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +180,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +226,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,38400"
 
 #
@@ -382,6 +400,7 @@ CONFIG_IP_NF_QUEUE=y
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -411,6 +430,7 @@ CONFIG_IP_NF_QUEUE=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -418,7 +438,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -436,9 +455,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -574,10 +593,7 @@ CONFIG_MII=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -632,10 +648,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -646,9 +672,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -734,8 +758,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -806,7 +832,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -833,6 +858,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -842,8 +868,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -851,6 +880,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -864,7 +894,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -896,11 +925,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -965,5 +996,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index 756beec5fb2..82baeef40a9 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:03:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:03:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,19 +91,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -101,6 +112,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -112,7 +128,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -159,6 +176,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -199,7 +217,6 @@ CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -207,6 +224,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -287,8 +305,9 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00810000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
@@ -382,6 +401,7 @@ CONFIG_IPV6=y
 # CONFIG_BT is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -389,7 +409,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -406,9 +425,9 @@ CONFIG_STANDALONE=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -549,6 +568,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
@@ -587,11 +607,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -612,6 +634,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
@@ -630,6 +653,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -648,8 +672,13 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
@@ -724,10 +753,7 @@ CONFIG_NET_PCI=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -821,10 +847,19 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -833,7 +868,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -857,6 +891,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -937,11 +972,11 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -964,6 +999,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1009,6 +1045,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1243,6 +1280,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1253,8 +1291,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1263,6 +1304,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1276,7 +1318,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1309,6 +1350,7 @@ CONFIG_CRYPTO=y
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1371,5 +1413,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 7fedaaee861..dd0e8900afb 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:04:41 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:07:14 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -53,11 +62,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -91,20 +101,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -126,7 +143,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@ CONFIG_CPU_SUBTYPE_SH7751=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -218,6 +236,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -302,7 +321,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00004000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 
 #
@@ -382,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +433,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -419,7 +441,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -432,6 +453,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -603,7 +626,11 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -679,6 +706,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -704,10 +732,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -804,10 +829,20 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -822,9 +857,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -861,6 +894,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -879,7 +913,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -944,8 +977,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1011,12 +1046,12 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1108,6 +1143,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1119,11 +1155,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1134,6 +1174,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1147,7 +1188,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1189,11 +1229,13 @@ CONFIG_CRYPTO_ECB=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1259,5 +1301,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index c296ca5d95c..662156ec921 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:13 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:11:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,18 +97,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -107,6 +118,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +134,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +181,7 @@ CONFIG_CPU_SUBTYPE_SH7710=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +227,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -292,7 +310,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -374,6 +393,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -440,6 +460,7 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -447,7 +468,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -469,9 +489,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -605,10 +625,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -686,6 +703,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -723,7 +745,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -775,8 +796,10 @@ CONFIG_RTC_LIB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -813,8 +836,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -847,7 +868,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -874,6 +894,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -883,8 +904,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -893,6 +917,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -906,7 +931,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -938,11 +962,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1006,5 +1032,6 @@ CONFIG_ZLIB_DEFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
index ba26be1b413..e06719a30ba 100644
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:14:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -46,14 +55,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -92,19 +99,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -113,13 +122,18 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -169,6 +183,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +229,6 @@ CONFIG_SPARSEMEM_STATIC=y
 #
 # Memory hotplug is currently incompatible with Software Suspend
 #
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +236,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -246,6 +261,8 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 # CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
 
 #
 # Timer and clock configuration
@@ -318,7 +335,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -345,6 +363,7 @@ CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -427,6 +446,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -437,6 +457,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -456,20 +477,21 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -488,8 +510,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -540,6 +564,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -587,7 +612,9 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -642,6 +669,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -654,11 +682,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -668,6 +700,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -692,4 +725,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index b1d9b2311e3..194ff703e23 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:07:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:15:37 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,19 +102,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +142,7 @@ CONFIG_MODULES=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +232,6 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +239,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +321,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
 
 #
@@ -371,6 +390,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -401,6 +421,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -409,7 +430,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -422,6 +442,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -431,9 +452,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -488,6 +509,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -565,7 +587,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -621,10 +642,7 @@ CONFIG_SH_ETH=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -716,11 +734,15 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -830,6 +852,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -899,6 +922,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -923,6 +947,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -956,8 +982,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1022,7 +1050,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1096,6 +1123,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1107,11 +1135,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1121,6 +1153,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1134,7 +1167,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1166,11 +1198,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1232,5 +1266,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
index 426a88f7a23..34bed5541f3 100644
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ b/arch/sh/configs/sh7770_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:05 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:17:16 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,14 +54,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -91,19 +98,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -112,13 +121,18 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +180,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 CONFIG_CPU_SUBTYPE_SH7770=y
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,7 +225,6 @@ CONFIG_SPARSEMEM_STATIC=y
 #
 # Memory hotplug is currently incompatible with Software Suspend
 #
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -218,6 +232,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -313,7 +328,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -338,6 +354,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -420,6 +437,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -430,6 +448,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -449,20 +468,21 @@ CONFIG_I2C_SH_MOBILE=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -481,8 +501,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -533,6 +555,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -580,7 +603,9 @@ CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -635,6 +660,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -647,11 +673,15 @@ CONFIG_STACKTRACE=y
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -661,6 +691,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -685,4 +716,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index ed316f602db..51cbaedf7a5 100644
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:29 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:39:20 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,10 +43,17 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -53,11 +62,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -67,8 +77,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -79,7 +88,7 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -93,28 +102,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_GCOV_KERNEL=y
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -127,7 +145,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +194,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +234,12 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -223,7 +248,6 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -231,6 +255,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -256,6 +281,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # CONFIG_SH_HIGHLANDER is not set
 CONFIG_SH_SH7785LCR=y
+# CONFIG_SH_SH7785LCR_PT is not set
 
 #
 # Timer and clock configuration
@@ -264,14 +290,29 @@ CONFIG_SH_TIMER_TMU=y
 CONFIG_SH_PCLK_FREQ=50000000
 CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
 #
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -299,12 +340,12 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
 
 #
 # Boot options
@@ -312,7 +353,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -321,8 +363,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -339,8 +380,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 CONFIG_NET=y
 
 #
@@ -392,6 +438,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -414,6 +461,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -421,6 +470,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -429,7 +479,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -442,18 +491,17 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -538,7 +586,8 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -561,7 +610,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -591,6 +640,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -612,6 +662,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -639,6 +690,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -657,7 +709,11 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -690,6 +746,7 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -697,12 +754,7 @@ CONFIG_R8169=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -739,25 +791,42 @@ CONFIG_INPUT_FF_MEMLESS=m
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -766,7 +835,12 @@ CONFIG_INPUT_KEYBOARD=y
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -777,7 +851,7 @@ CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -796,12 +870,10 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -809,6 +881,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -838,6 +911,7 @@ CONFIG_I2C_ALGOPCA=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -864,21 +938,42 @@ CONFIG_I2C_PCA_PLATFORM=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_SH_WDT=y
+# CONFIG_SH_WDT_MMAP is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -896,14 +991,17 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -915,12 +1013,11 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -955,7 +1052,7 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_CARMINE is not set
-CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
@@ -981,14 +1078,112 @@ CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=y
+CONFIG_SND_OPL3_LIB_SEQ=y
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=y
+CONFIG_SND_OPL3_LIB=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+CONFIG_SND_CMIPCI=y
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1001,34 +1196,39 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
-# CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=m
 # CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_ZEROPLUS=m
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1040,13 +1240,14 @@ CONFIG_USB=y
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1061,10 +1262,8 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
@@ -1133,7 +1332,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-CONFIG_USB_TEST=m
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1143,7 +1342,29 @@ CONFIG_USB_TEST=m
 #
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1179,6 +1400,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1203,9 +1425,20 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
 
 #
 # TI VLYNQ
@@ -1225,13 +1458,15 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1275,9 +1510,9 @@ CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
@@ -1297,20 +1532,20 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
@@ -1373,85 +1608,69 @@ CONFIG_NLS_ISO8859_1=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_DEBUG_KERNEL is not set
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
+CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+CONFIG_IRQSOFF_TRACER=y
 # CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_SCHED_TRACER=y
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_STACK_TRACER=y
+CONFIG_KMEMTRACE=y
+CONFIG_WORKQUEUE_TRACER=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_SH_NO_BSS_INIT is not set
+CONFIG_DWARF_UNWINDER=y
+CONFIG_MCOUNT=y
 
 #
 # Security options
@@ -1465,7 +1684,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1507,11 +1725,13 @@ CONFIG_CRYPTO_CBC=y
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1556,7 +1776,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1573,5 +1793,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 004e6f5e8a6..8c2c47ed399 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:09:34 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:23:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,6 +43,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -53,11 +61,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,19 +102,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -115,6 +125,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -127,7 +141,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +190,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +239,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -306,7 +322,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -386,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -415,6 +433,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -423,7 +442,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -436,6 +454,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -445,9 +464,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -585,6 +604,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -606,6 +626,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -633,6 +654,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -651,7 +673,11 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -684,6 +710,7 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -691,10 +718,7 @@ CONFIG_R8169=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -744,13 +768,17 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -803,6 +831,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -832,6 +861,7 @@ CONFIG_I2C_ALGOPCA=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -858,20 +888,21 @@ CONFIG_I2C_PCA_PLATFORM=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -890,14 +921,17 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -982,7 +1016,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1005,6 +1038,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1055,6 +1089,7 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1173,6 +1208,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1224,8 +1260,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1291,12 +1329,12 @@ CONFIG_MINIX_FS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1372,6 +1410,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1407,18 +1446,23 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1426,6 +1470,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1440,11 +1485,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1459,7 +1504,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1501,11 +1545,13 @@ CONFIG_CRYPTO_CBC=y
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1567,5 +1613,6 @@ CONFIG_CRC32=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index ad7d60972fc..92115e61275 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:10:33 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:27:17 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,6 +39,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -46,11 +55,12 @@ CONFIG_LOCALVERSION_AUTO=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -77,18 +87,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -96,12 +107,16 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +163,7 @@ CONFIG_CPU_SUBTYPE_SH7706=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -193,6 +209,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -274,7 +291,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00210000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
 
 #
@@ -339,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -368,6 +387,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -375,7 +395,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -529,10 +548,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -591,11 +607,15 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -672,7 +692,9 @@ CONFIG_RTC_LIB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -709,8 +731,6 @@ CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_SYSFS is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -732,7 +752,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -768,6 +787,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -775,8 +795,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -785,6 +808,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -797,7 +821,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -828,11 +851,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -895,5 +920,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index 207b0c9a8cd..e3858d757d5 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:11:03 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:29:26 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,7 +31,9 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -55,12 +64,12 @@ CONFIG_AUDIT_TREE=y
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,19 +120,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -135,6 +146,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -147,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -196,6 +212,7 @@ CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -256,6 +273,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -353,7 +371,8 @@ CONFIG_PREEMPT=y
 CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00010000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
 
 #
@@ -438,6 +457,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -489,6 +509,7 @@ CONFIG_CAN_VCAN=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -562,7 +583,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -570,6 +590,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -602,12 +623,10 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -675,6 +694,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -685,6 +705,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -706,9 +727,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -729,11 +747,15 @@ CONFIG_SPI_MASTER=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -762,8 +784,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -808,6 +834,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
 # CONFIG_USB_HWA_HCD is not set
@@ -862,6 +889,7 @@ CONFIG_USB_R8A66597_HCD=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
@@ -876,10 +904,11 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -939,6 +968,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -950,6 +980,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1002,8 +1033,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1063,7 +1096,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1129,6 +1161,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1164,22 +1197,29 @@ CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1188,6 +1228,7 @@ CONFIG_FTRACE=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1205,10 +1246,10 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1223,7 +1264,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1255,11 +1295,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1322,5 +1364,6 @@ CONFIG_AUDIT_GENERIC=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index 2be2d75adbb..cb919a0de4b 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:03:04 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:33:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -57,11 +57,12 @@ CONFIG_KERNEL_GZIP=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -95,21 +96,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -175,6 +175,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -220,6 +221,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -312,7 +314,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -374,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +407,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -410,7 +415,6 @@ CONFIG_WIRELESS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -618,10 +622,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -714,7 +715,6 @@ CONFIG_DEVPORT=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -736,6 +736,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -818,6 +819,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -882,7 +884,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -909,6 +910,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -922,7 +924,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 5d970263c09..b9fe960309f 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:35:03 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -45,11 +54,12 @@ CONFIG_SWAP=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,18 +93,19 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -103,6 +114,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -294,7 +311,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -402,10 +420,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -416,9 +444,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -495,7 +521,9 @@ CONFIG_RTC_LIB=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -559,7 +587,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -577,6 +604,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -586,8 +614,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -595,6 +626,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -623,4 +655,5 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 7ad080e820c..2ca79ed9fb6 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:36:36 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -90,19 +100,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -307,7 +324,8 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x009e0000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
 
 #
@@ -509,6 +527,7 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=y
@@ -595,6 +614,7 @@ CONFIG_NET_SCH_FIFO=y
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -603,7 +623,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -616,6 +635,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -628,9 +648,9 @@ CONFIG_CONNECTOR=m
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -820,6 +840,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -832,7 +853,11 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -931,6 +956,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -956,10 +982,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -1087,10 +1110,20 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -1105,9 +1138,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1149,6 +1180,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1167,7 +1199,6 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1217,6 +1248,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1416,8 +1448,10 @@ CONFIG_XFS_FS=m
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1489,7 +1523,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1591,6 +1624,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1621,23 +1655,29 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1650,14 +1690,13 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1672,7 +1711,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1715,11 +1753,13 @@ CONFIG_CRYPTO_ECB=y
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1790,5 +1830,6 @@ CONFIG_TEXTSEARCH_FSM=m
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 608fe563614..b012ca77f02 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:14:36 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:42:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,19 +101,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -113,6 +124,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +140,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,7 +156,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -176,6 +191,7 @@ CONFIG_ARCH_SHMOBILE=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -233,6 +249,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +331,8 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
 
 #
@@ -334,7 +352,13 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -382,6 +406,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -411,19 +436,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT_PID=y
@@ -444,6 +467,7 @@ CONFIG_MAC80211_RC_DEFAULT="pid"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -453,9 +477,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -590,7 +614,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -598,6 +621,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -631,10 +655,7 @@ CONFIG_MII=y
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
@@ -648,12 +669,13 @@ CONFIG_LIBERTAS_DEBUG=y
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 # CONFIG_IWM is not set
 
 #
@@ -750,10 +772,20 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -764,9 +796,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -813,6 +843,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -827,9 +858,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
-# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
 # CONFIG_USB_HWA_HCD is not set
 
 #
@@ -893,6 +924,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -917,6 +949,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -949,8 +983,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1014,7 +1050,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1091,6 +1126,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1103,8 +1139,11 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1112,6 +1151,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1125,7 +1165,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1167,11 +1206,13 @@ CONFIG_CRYPTO_ECB=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1235,5 +1276,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
index ee1987e6cc5..9f8aee5bc55 100644
--- a/arch/sh/configs/urquell_defconfig
+++ b/arch/sh/configs/urquell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:15:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:46:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,11 +14,13 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_SYS_SUPPORTS_TMU=y
@@ -29,7 +31,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +43,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -54,14 +64,12 @@ CONFIG_AUDIT_TREE=y
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,20 +119,20 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -134,6 +142,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -195,6 +208,7 @@ CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -244,7 +258,6 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -252,6 +265,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -322,6 +336,7 @@ CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_SECCOMP=y
+# CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -334,7 +349,8 @@ CONFIG_SPARSE_IRQ=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -343,6 +359,8 @@ CONFIG_PCI=y
 # CONFIG_SH_PCIDMA_NONCOHERENT is not set
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 CONFIG_PCIEASPM=y
 CONFIG_PCIEASPM_DEBUG=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
@@ -367,6 +385,7 @@ CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
@@ -420,6 +439,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -442,7 +462,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -450,6 +469,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -458,7 +478,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +490,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -480,9 +500,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -620,6 +640,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
@@ -641,6 +662,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -668,6 +690,7 @@ CONFIG_ATA_SFF=y
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -686,7 +709,11 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -782,6 +809,7 @@ CONFIG_SKY2_DEBUG=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -789,10 +817,7 @@ CONFIG_SKY2_DEBUG=y
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -842,14 +867,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -902,6 +932,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -931,6 +962,7 @@ CONFIG_I2C_ALGOPCA=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -958,15 +990,17 @@ CONFIG_I2C_PCA_PLATFORM=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -987,14 +1021,24 @@ CONFIG_GPIOLIB=y
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1045,6 +1089,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1056,9 +1101,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-CONFIG_THERMAL_HWMON=y
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1079,8 +1122,10 @@ CONFIG_MFD_SM501=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1099,6 +1144,7 @@ CONFIG_MEDIA_SUPPORT=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1183,7 +1229,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1206,6 +1251,7 @@ CONFIG_HID_CYPRESS=y
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1255,6 +1301,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1373,6 +1420,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1422,6 +1470,7 @@ CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=y
@@ -1431,9 +1480,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_BTRFS_FS=y
 # CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1499,12 +1550,12 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1576,6 +1627,7 @@ CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1610,18 +1662,23 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1633,11 +1690,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1652,7 +1709,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1694,11 +1750,13 @@ CONFIG_CRYPTO_CBC=y
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1764,5 +1822,6 @@ CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
-- 
cgit v1.2.3


From 6f3529f00a0a9ac06413d18d3926adf099cb59af Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 25 Sep 2009 11:55:07 +0900
Subject: sh: enable onenand support in kfr2r09 defconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/kfr2r09_defconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index e12ce538fd4..8ae65d294b1 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.31
-# Thu Sep 24 18:03:26 2009
+# Fri Sep 25 11:54:22 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -506,7 +506,12 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 # CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
 
 #
 # LPDDR flash memory drivers
-- 
cgit v1.2.3


From 8255fff45b2a9b53f8bf39147157ddaf9c72a585 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Thu, 12 Mar 2009 07:31:41 +0000
Subject: sh: Add support DMA Engine to SH7722

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 35097753456..5491b094cf0 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -17,6 +17,7 @@
 #include <linux/sh_timer.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <asm/dma-sh.h>
 #include <cpu/sh7722.h>
 
 static struct resource rtc_resources[] = {
@@ -373,6 +374,18 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_dmae_pdata dma_platform_data = {
+	.mode = 0,
+};
+
+static struct platform_device dma_device = {
+	.name		= "sh-dma-engine",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7722_devices[] __initdata = {
 	&cmt_device,
 	&tmu0_device,
@@ -385,6 +398,7 @@ static struct platform_device *sh7722_devices[] __initdata = {
 	&vpu_device,
 	&veu_device,
 	&jpu_device,
+	&dma_device,
 };
 
 static int __init sh7722_devices_setup(void)
-- 
cgit v1.2.3


From ecb6fd529942c143c8837dfb11262009c77e9c77 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Thu, 12 Mar 2009 07:31:45 +0000
Subject: sh: Add support DMA Engine to SH7780

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 2c901f44695..12ff56f19c5 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
+#include <asm/dma-sh.h>
 
 static struct sh_timer_config tmu0_platform_data = {
 	.name = "TMU0",
@@ -240,6 +241,18 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct sh_dmae_pdata dma_platform_data = {
+	.mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1),
+};
+
+static struct platform_device dma_device = {
+	.name           = "sh-dma-engine",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7780_devices[] __initdata = {
 	&tmu0_device,
 	&tmu1_device,
@@ -249,6 +262,7 @@ static struct platform_device *sh7780_devices[] __initdata = {
 	&tmu5_device,
 	&rtc_device,
 	&sci_device,
+	&dma_device,
 };
 
 static int __init sh7780_devices_setup(void)
-- 
cgit v1.2.3


From 2c86963b093c1a0887dfc6b32c6e5ea3a80f2922 Mon Sep 17 00:00:00 2001
From: Tony Luck <tony.luck@intel.com>
Date: Fri, 25 Sep 2009 08:42:16 -0700
Subject: [IA64] implement ticket locks for Itanium

Back in January 2008 Nick Piggin implemented "ticket" spinlocks
for X86 (See commit 314cdbefd1fd0a7acf3780e9628465b77ea6a836).

IA64 implementation has a couple of differences because of the
available atomic operations ... e.g. we have no fetchadd2 instruction
that operates on a 16-bit quantity so we make ticket locks use
a 32-bit word for each of the current ticket and now-serving values.

Performance on uncontended locks is about 8% worse than the previous
implementation, but this seems a good trade for determinism in the
contended case. Performance impact on macro-level benchmarks is in
the noise.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/Kconfig                      |   4 +-
 arch/ia64/include/asm/spinlock.h       | 175 +++++++++++++++++----------------
 arch/ia64/include/asm/spinlock_types.h |   2 +-
 arch/ia64/kernel/head.S                |  89 -----------------
 arch/ia64/kernel/ia64_ksyms.c          |  20 ----
 arch/ia64/oprofile/backtrace.c         |  20 +---
 6 files changed, 92 insertions(+), 218 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 6851e52ed5a..1ee596cd942 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -60,9 +60,7 @@ config IOMMU_HELPER
        bool
 
 config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
+	def_bool n
 
 config RWSEM_XCHGADD_ALGORITHM
 	bool
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 13ab71576bc..30bb930e111 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -19,103 +19,106 @@
 
 #define __raw_spin_lock_init(x)			((x)->lock = 0)
 
-#ifdef ASM_SUPPORTED
 /*
- * Try to get the lock.  If we fail to get the lock, make a non-standard call to
- * ia64_spinlock_contention().  We do not use a normal call because that would force all
- * callers of __raw_spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
- * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered".
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ *
+ *   63                     32  31                      0
+ *  +----------------------------------------------------+
+ *  |  next_ticket_number      |     now_serving         |
+ *  +----------------------------------------------------+
  */
 
-#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+#define TICKET_SHIFT	32
 
-static inline void
-__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags)
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
 {
-	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
-
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) br.cond.spnt.many b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#else
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	/* mis-declare, so we get the entry-point, not it's function descriptor: */
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "(p14) br.call.spnt.many b6 = b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#endif
+	int	*p = (int *)&lock->lock, turn, now_serving;
+
+	now_serving = *p;
+	turn = ia64_fetchadd(1, p+1, acq);
+
+	if (turn == now_serving)
+		return;
+
+	do {
+		cpu_relax();
+	} while (ACCESS_ONCE(*p) != turn);
 }
 
-#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock), try;
 
-/* Unlock by doing an ordered store and releasing the cacheline with nta */
-static inline void __raw_spin_unlock(raw_spinlock_t *x) {
-	barrier();
-	asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x));
+	if (!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1))) {
+		try = tmp + (1L << TICKET_SHIFT);
+
+		return ia64_cmpxchg(acq, &lock->lock, tmp, try, sizeof (tmp)) == tmp;
+	}
+	return 0;
 }
 
-#else /* !ASM_SUPPORTED */
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-# define __raw_spin_lock(x)								\
-do {											\
-	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
-	__u64 ia64_spinlock_val;							\
-	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
-	if (unlikely(ia64_spinlock_val)) {						\
-		do {									\
-			while (*ia64_spinlock_ptr)					\
-				ia64_barrier();						\
-			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
-		} while (ia64_spinlock_val);						\
-	}										\
-} while (0)
-#define __raw_spin_unlock(x)	do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0)
-#endif /* !ASM_SUPPORTED */
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+	int	*p = (int *)&lock->lock;
+
+	(void)ia64_fetchadd(1, p, rel);
+}
+
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock);
+
+	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1));
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock);
 
-#define __raw_spin_is_locked(x)		((x)->lock != 0)
-#define __raw_spin_trylock(x)		(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+	return (((tmp >> TICKET_SHIFT) - tmp) & ((1L << TICKET_SHIFT) - 1)) > 1;
+}
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_locked(lock);
+}
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_contended(lock);
+}
+#define __raw_spin_is_contended	__raw_spin_is_contended
+
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__ticket_spin_lock(lock);
+}
+
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return __ticket_spin_trylock(lock);
+}
+
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__ticket_spin_unlock(lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+						  unsigned long flags)
+{
+	__raw_spin_lock(lock);
+}
+
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+	while (__raw_spin_is_locked(lock))
+		cpu_relax();
+}
 
 #define __raw_read_can_lock(rw)		(*(volatile int *)(rw) >= 0)
 #define __raw_write_can_lock(rw)	(*(volatile int *)(rw) == 0)
diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h
index 474e46f1ab4..b61d136d9bc 100644
--- a/arch/ia64/include/asm/spinlock_types.h
+++ b/arch/ia64/include/asm/spinlock_types.h
@@ -6,7 +6,7 @@
 #endif
 
 typedef struct {
-	volatile unsigned int lock;
+	volatile unsigned long lock;
 } raw_spinlock_t;
 
 #define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 1a6e44515eb..696eff28a0c 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -1130,95 +1130,6 @@ SET_REG(b5);
 #endif /* CONFIG_IA64_BRL_EMU */
 
 #ifdef CONFIG_SMP
-	/*
-	 * This routine handles spinlock contention.  It uses a non-standard calling
-	 * convention to avoid converting leaf routines into interior routines.  Because
-	 * of this special convention, there are several restrictions:
-	 *
-	 * - do not use gp relative variables, this code is called from the kernel
-	 *   and from modules, r1 is undefined.
-	 * - do not use stacked registers, the caller owns them.
-	 * - do not use the scratch stack space, the caller owns it.
-	 * - do not use any registers other than the ones listed below
-	 *
-	 * Inputs:
-	 *   ar.pfs - saved CFM of caller
-	 *   ar.ccv - 0 (and available for use)
-	 *   r27    - flags from spin_lock_irqsave or 0.  Must be preserved.
-	 *   r28    - available for use.
-	 *   r29    - available for use.
-	 *   r30    - available for use.
-	 *   r31    - address of lock, available for use.
-	 *   b6     - return address
-	 *   p14    - available for use.
-	 *   p15    - used to track flag status.
-	 *
-	 * If you patch this code to use more registers, do not forget to update
-	 * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
-	 */
-
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-
-GLOBAL_ENTRY(ia64_spinlock_contention_pre3_4)
-	.prologue
-	.save ar.pfs, r0	// this code effectively has a zero frame size
-	.save rp, r28
-	.body
-	nop 0
-	tbit.nz p15,p0=r27,IA64_PSR_I_BIT
-	.restore sp		// pop existing prologue after next insn
-	mov b6 = r28
-	.prologue
-	.save ar.pfs, r0
-	.altrp b6
-	.body
-	;;
-(p15)	ssm psr.i		// reenable interrupts if they were on
-				// DavidM says that srlz.d is slow and is not required in this case
-.wait:
-	// exponential backoff, kdb, lockmeter etc. go in here
-	hint @pause
-	ld4 r30=[r31]		// don't use ld4.bias; if it's contended, we won't write the word
-	nop 0
-	;;
-	cmp4.ne p14,p0=r30,r0
-(p14)	br.cond.sptk.few .wait
-(p15)	rsm psr.i		// disable interrupts if we reenabled them
-	br.cond.sptk.few b6	// lock is now free, try to acquire
-	.global ia64_spinlock_contention_pre3_4_end	// for kernprof
-ia64_spinlock_contention_pre3_4_end:
-END(ia64_spinlock_contention_pre3_4)
-
-#else
-
-GLOBAL_ENTRY(ia64_spinlock_contention)
-	.prologue
-	.altrp b6
-	.body
-	tbit.nz p15,p0=r27,IA64_PSR_I_BIT
-	;;
-.wait:
-(p15)	ssm psr.i		// reenable interrupts if they were on
-				// DavidM says that srlz.d is slow and is not required in this case
-.wait2:
-	// exponential backoff, kdb, lockmeter etc. go in here
-	hint @pause
-	ld4 r30=[r31]		// don't use ld4.bias; if it's contended, we won't write the word
-	;;
-	cmp4.ne p14,p0=r30,r0
-	mov r30 = 1
-(p14)	br.cond.sptk.few .wait2
-(p15)	rsm psr.i		// disable interrupts if we reenabled them
-	;;
-	cmpxchg4.acq r30=[r31], r30, ar.ccv
-	;;
-	cmp4.ne p14,p0=r0,r30
-(p14)	br.cond.sptk.few .wait
-
-	br.ret.sptk.many b6	// lock is now taken
-END(ia64_spinlock_contention)
-
-#endif
 
 #ifdef CONFIG_HOTPLUG_CPU
 GLOBAL_ENTRY(ia64_jump_to_sal)
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 8ebccb589e1..14d39e30062 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -84,26 +84,6 @@ EXPORT_SYMBOL(ia64_save_scratch_fpregs);
 #include <asm/unwind.h>
 EXPORT_SYMBOL(unw_init_running);
 
-#ifdef ASM_SUPPORTED
-# ifdef CONFIG_SMP
-#  if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention_pre3_4;
-EXPORT_SYMBOL(ia64_spinlock_contention_pre3_4);
-#  else
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention;
-EXPORT_SYMBOL(ia64_spinlock_contention);
-#  endif
-# endif
-#endif
-
 #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
 extern void esi_call_phys (void);
 EXPORT_SYMBOL_GPL(esi_call_phys);
diff --git a/arch/ia64/oprofile/backtrace.c b/arch/ia64/oprofile/backtrace.c
index adb01566bd5..5cdd7e4a597 100644
--- a/arch/ia64/oprofile/backtrace.c
+++ b/arch/ia64/oprofile/backtrace.c
@@ -32,24 +32,6 @@ typedef struct
 	u64 *prev_pfs_loc;	/* state for WAR for old spinlock ool code */
 } ia64_backtrace_t;
 
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * Returns non-zero if the PC is in the spinlock contention out-of-line code
- * with non-standard calling sequence (on older compilers).
- */
-static __inline__ int in_old_ool_spinlock_code(unsigned long pc)
-{
-	extern const char ia64_spinlock_contention_pre3_4[] __attribute__ ((weak));
-	extern const char ia64_spinlock_contention_pre3_4_end[] __attribute__ ((weak));
-	unsigned long sc_start = (unsigned long)ia64_spinlock_contention_pre3_4;
-	unsigned long sc_end = (unsigned long)ia64_spinlock_contention_pre3_4_end;
-	return (sc_start && sc_end && pc >= sc_start && pc < sc_end);
-}
-#else
-/* Newer spinlock code does a proper br.call and works fine with the unwinder */
-#define in_old_ool_spinlock_code(pc)	0
-#endif
-
 /* Returns non-zero if the PC is in the Interrupt Vector Table */
 static __inline__ int in_ivt_code(unsigned long pc)
 {
@@ -80,7 +62,7 @@ static __inline__ int next_frame(ia64_backtrace_t *bt)
 	 */
 	if (bt->prev_pfs_loc && bt->regs && bt->frame.pfs_loc == bt->prev_pfs_loc)
 		bt->frame.pfs_loc = &bt->regs->ar_pfs;
-	bt->prev_pfs_loc = (in_old_ool_spinlock_code(bt->frame.ip) ? bt->frame.pfs_loc : NULL);
+	bt->prev_pfs_loc = NULL;
 
 	return unw_unwind(&bt->frame) == 0;
 }
-- 
cgit v1.2.3


From d71789b6fa37c21ce5eb588d279f57904a62e7e2 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@gmail.com>
Date: Thu, 24 Sep 2009 21:44:24 +0200
Subject: mips: fix build of vmlinux.lds

Commit 51b563fc93c8cb5bff1d67a0a71c374e4a4ea049 ("arm, cris, mips,
sparc, powerpc, um, xtensa: fix build with bash 4.0") removed a few
CPPFLAGS with vital include paths necessary to build vmlinux.lds
on MIPS, and moved the calculation of the 'jiffies' symbol
directly to vmlinux.lds.S but forgot to change make ifdef/... to
cpp macros.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
[sam: moved assignment of CPPFLAGS arch/mips/kernel/Makefile]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
---
 arch/mips/kernel/Makefile      |  2 ++
 arch/mips/kernel/vmlinux.lds.S | 12 ++++++------
 2 files changed, 8 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index e9612215992..eecd2a9f155 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the Linux/MIPS kernel.
 #
 
+CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
+
 extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 9bf0e3df7c5..162b29954ba 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -11,15 +11,15 @@ PHDRS {
 	note PT_NOTE FLAGS(4);	/* R__ */
 }
 
-ifdef CONFIG_32BIT
-	ifdef CONFIG_CPU_LITTLE_ENDIAN
+#ifdef CONFIG_32BIT
+	#ifdef CONFIG_CPU_LITTLE_ENDIAN
 		jiffies  = jiffies_64;
-	else
+	#else
 		jiffies  = jiffies_64 + 4;
-	endif
-else
+	#endif
+#else
 	jiffies  = jiffies_64;
-endif
+#endif
 
 SECTIONS
 {
-- 
cgit v1.2.3


From de078ef55c74d02ee93d44513da5ee88a089d71d Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Fri, 25 Sep 2009 19:53:43 +0200
Subject: alpha: fix build after vmlinux.lds.S cleanup

Add include to get missing THREAD_SIZE definition

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tim Abbott <tabbott@ksplice.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
---
 arch/alpha/kernel/vmlinux.lds.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 6dc03c35caa..55c3b23612a 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -1,4 +1,5 @@
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
 #include <asm/page.h>
 
 OUTPUT_FORMAT("elf64-alpha")
-- 
cgit v1.2.3


From 9e6ec39becb02bda776eebf12c0677910d54b848 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Fri, 25 Sep 2009 16:28:02 -0400
Subject: make Linux bootable on ARM again
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 200b812d00 "Clear the exclusive monitor when returning from an
exception" broke the vast majority of ARM systems in the wild which are
still pre ARMv6.  The kernel is crashing on the first occurrence of an
exception due to the removal of the actual return instruction for them.
Let's add it back.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/kernel/entry-header.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index e17e3c30d95..ac34c0d9384 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -83,6 +83,8 @@
 	ldr	r0, [sp]
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
 	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#else
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 #endif
 	.endm
 
-- 
cgit v1.2.3


From 3e2ada5867b7e9fa0b296d30fa8f3726ebd0a8b7 Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Sun, 27 Sep 2009 03:30:51 -0400
Subject: ACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regression

Don't disable ARB_DISABLE when the familary ID is 0x0F.

http://bugzilla.kernel.org/show_bug.cgi?id=14211

This was a 2.6.31 regression, and so this patch
needs to be applied to 2.6.31.stable

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/acpi/cstate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 8c44c232efc..59cdfa4686b 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -48,7 +48,7 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
 	 * P4, Core and beyond CPUs
 	 */
 	if (c->x86_vendor == X86_VENDOR_INTEL &&
-	    (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+	    (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 14)))
 			flags->bm_control = 0;
 }
 EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
-- 
cgit v1.2.3


From d949f36f1865c60239d4265b50c4b75354fcb8f3 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat, 26 Sep 2009 09:35:07 -0700
Subject: x86: Fix hwpoison code related build failure on 32-bit NUMAQ

This build failure triggers:

 In file included from include/linux/suspend.h:8,
                 from arch/x86/kernel/asm-offsets_32.c:11,
                 from arch/x86/kernel/asm-offsets.c:2:
 include/linux/mm.h:503:2: error: #error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > BITS_PER_LONG - NR_PAGEFLAGS

Because due to the hwpoison page flag we ran out of page
flags on 32-bit.

Dont turn on hwpoison on 32-bit NUMA (it's rare in any
case).

Also clean up the Kconfig dependencies in the generic MM
code by introducing ARCH_SUPPORTS_MEMORY_FAILURE.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 93698794aa3..8da93745c08 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -432,6 +432,17 @@ config X86_NUMAQ
 	  of Flat Logical.  You will need a new lynxer.elf file to flash your
 	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
+config X86_SUPPORTS_MEMORY_FAILURE
+	bool
+	# MCE code calls memory_failure():
+	depends on X86_MCE
+	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
+	depends on !X86_NUMAQ
+	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
+	depends on X86_64 || !SPARSEMEM
+	select ARCH_SUPPORTS_MEMORY_FAILURE
+	default y
+
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
-- 
cgit v1.2.3


From e56d953d190061938b31cabbe01b7f3d76c60bd0 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Sun, 27 Sep 2009 04:17:21 -0400
Subject: ACPI: IA64=y ACPI=n build fix

ia64's sim_defconfig uses CONFIG_ACPI=n
which now #define's acpi_disabled in <linux/acpi.h>

So we shouldn't re-define it here in <asm/acpi.h>

Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/ia64/include/asm/acpi.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 0f82cc2934e..91df9686a0d 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -89,10 +89,12 @@ ia64_acpi_release_global_lock (unsigned int *lock)
 #define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq)				\
 	((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
 
+#ifdef	CONFIG_ACPI
 #define acpi_disabled 0	/* ACPI always enabled on IA64 */
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
 #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
 
-- 
cgit v1.2.3


From f0f37e2f77731b3473fa6bd5ee53255d9a9cdb40 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sun, 27 Sep 2009 22:29:37 +0400
Subject: const: mark struct vm_struct_operations

* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/ia32/binfmt_elf32.c            |  4 ++--
 arch/powerpc/platforms/cell/spufs/file.c | 14 +++++++-------
 arch/x86/pci/i386.c                      |  2 +-
 3 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
index f92bdaac897..c69552bf893 100644
--- a/arch/ia64/ia32/binfmt_elf32.c
+++ b/arch/ia64/ia32/binfmt_elf32.c
@@ -69,11 +69,11 @@ ia32_install_gate_page (struct vm_area_struct *vma, struct vm_fault *vmf)
 }
 
 
-static struct vm_operations_struct ia32_shared_page_vm_ops = {
+static const struct vm_operations_struct ia32_shared_page_vm_ops = {
 	.fault = ia32_install_shared_page
 };
 
-static struct vm_operations_struct ia32_gate_page_vm_ops = {
+static const struct vm_operations_struct ia32_gate_page_vm_ops = {
 	.fault = ia32_install_gate_page
 };
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 8f079b865ad..96130944617 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -309,7 +309,7 @@ static int spufs_mem_mmap_access(struct vm_area_struct *vma,
 	return len;
 }
 
-static struct vm_operations_struct spufs_mem_mmap_vmops = {
+static const struct vm_operations_struct spufs_mem_mmap_vmops = {
 	.fault = spufs_mem_mmap_fault,
 	.access = spufs_mem_mmap_access,
 };
@@ -436,7 +436,7 @@ static int spufs_cntl_mmap_fault(struct vm_area_struct *vma,
 	return spufs_ps_fault(vma, vmf, 0x4000, SPUFS_CNTL_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_cntl_mmap_vmops = {
+static const struct vm_operations_struct spufs_cntl_mmap_vmops = {
 	.fault = spufs_cntl_mmap_fault,
 };
 
@@ -1143,7 +1143,7 @@ spufs_signal1_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 #endif
 }
 
-static struct vm_operations_struct spufs_signal1_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal1_mmap_vmops = {
 	.fault = spufs_signal1_mmap_fault,
 };
 
@@ -1279,7 +1279,7 @@ spufs_signal2_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 #endif
 }
 
-static struct vm_operations_struct spufs_signal2_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal2_mmap_vmops = {
 	.fault = spufs_signal2_mmap_fault,
 };
 
@@ -1397,7 +1397,7 @@ spufs_mss_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_MSS_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_mss_mmap_vmops = {
+static const struct vm_operations_struct spufs_mss_mmap_vmops = {
 	.fault = spufs_mss_mmap_fault,
 };
 
@@ -1458,7 +1458,7 @@ spufs_psmap_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_PS_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_psmap_mmap_vmops = {
+static const struct vm_operations_struct spufs_psmap_mmap_vmops = {
 	.fault = spufs_psmap_mmap_fault,
 };
 
@@ -1517,7 +1517,7 @@ spufs_mfc_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	return spufs_ps_fault(vma, vmf, 0x3000, SPUFS_MFC_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_mfc_mmap_vmops = {
+static const struct vm_operations_struct spufs_mfc_mmap_vmops = {
 	.fault = spufs_mfc_mmap_fault,
 };
 
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 52e62e57fed..b22d13b0c71 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -266,7 +266,7 @@ void pcibios_set_master(struct pci_dev *dev)
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
-static struct vm_operations_struct pci_mmap_ops = {
+static const struct vm_operations_struct pci_mmap_ops = {
 	.access = generic_access_phys,
 };
 
-- 
cgit v1.2.3


From b3b75cef705708402b5d381a30fa17f89e0549b4 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 27 Sep 2009 14:46:05 -0700
Subject: alpha: Fix duplicate <asm/thread_info.h> include

.. duplicated by merging the same fix twice, for details see commit
0d9df2515dbceb67d343c0f10fd3ff218380d524 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes")

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/vmlinux.lds.S | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index ecf4d488333..003ef4c0258 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -1,7 +1,6 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
-#include <asm/thread_info.h>
 
 OUTPUT_FORMAT("elf64-alpha")
 OUTPUT_ARCH(alpha)
-- 
cgit v1.2.3


From 055c49d285a151ccb91d63bac6d8621be3db5c93 Mon Sep 17 00:00:00 2001
From: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Date: Mon, 28 Sep 2009 09:21:26 -0700
Subject: omap: Fix wrong condition check in while loop for mailbox and iommu2

It's worked fine so far since reset is done for the first time.

Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Leppanen <juha_motorsportcom@luukku.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/iommu2.c  | 2 +-
 arch/arm/mach-omap2/mailbox.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 2d9b5cc981c..4a0e1cd5c1f 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -79,7 +79,7 @@ static int omap2_iommu_enable(struct iommu *obj)
 		l = iommu_read_reg(obj, MMU_SYSSTATUS);
 		if (l & MMU_SYS_RESETDONE)
 			break;
-	} while (time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout));
 
 	if (!(l & MMU_SYS_RESETDONE)) {
 		dev_err(obj->dev, "can't take mmu out of reset\n");
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index f3fefca5849..c035ad3426d 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -93,7 +93,7 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 		l = mbox_read_reg(MAILBOX_SYSSTATUS);
 		if (l & RESETDONE)
 			break;
-	} while (time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout));
 
 	if (!(l & RESETDONE)) {
 		pr_err("Can't take mmu out of reset\n");
-- 
cgit v1.2.3


From 7f8b7170cdda6645ed4fec4b2d415bf4cebd7839 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 16:50:05 +0100
Subject: ARM: Fix section mismatch warning in Integrator pci_v3

WARNING: vmlinux.o(.text+0xc9d4): Section mismatch in reference from the function pci_v3_scan_bus() to the function .devinit.text:pci_scan_bus_parented()
The function pci_v3_scan_bus() references
the function __devinit pci_scan_bus_parented().
This is often because pci_v3_scan_bus lacks a __devinit
annotation or the annotation of pci_scan_bus_parented is wrong.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/mach-integrator/pci_v3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index f1d72b22545..901cc205015 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -486,7 +486,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 	return ret;
 }
 
-struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
 }
-- 
cgit v1.2.3


From fac28e6df9b5fdfa0cf6b99eae022609dd1108d5 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 17:32:47 +0100
Subject: ARM: Fix SA11x0 clocksource warning

8e19608 missed updating SA11x0, and thus:

arch/arm/mach-sa1100/time.c:88: warning: initialization from incompatible pointer type

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-sa1100/time.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 95d92e8e56a..b9cbb56d6e9 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -77,7 +77,7 @@ static struct clock_event_device ckevt_sa1100_osmr0 = {
 	.set_mode	= sa1100_osmr0_set_mode,
 };
 
-static cycle_t sa1100_read_oscr(void)
+static cycle_t sa1100_read_oscr(struct clocksource *s)
 {
 	return OSCR;
 }
-- 
cgit v1.2.3


From d80ade7b323152672bf66e74ec11c324332f6d1e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 17:40:03 +0100
Subject: ARM: Fix warning: #warning syscall migrate_pages not implemented

We're not implementing this syscall (we're not NUMA) so we might as
well silence this warning.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/unistd.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 89f7eade20a..7020217fc49 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -456,6 +456,7 @@
  * Unimplemented (or alternatively implemented) syscalls
  */
 #define __IGNORE_fadvise64_64		1
+#define __IGNORE_migrate_pages		1
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
-- 
cgit v1.2.3


From 041d785f807c8e92e11cc1bd2b3438f7823e63d2 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 17:40:42 +0100
Subject: ARM: Fix warning: unused variable 'highmem'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4426ee67cec..ce551ec2cb2 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -726,6 +726,8 @@ static void __init sanity_check_meminfo(void)
 			bank->size = VMALLOC_MIN - __va(bank->start);
 		}
 #else
+		bank->highmem = highmem;
+
 		/*
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
-- 
cgit v1.2.3


From d5fc79cca2ec8d70200aee3c01cfc95fa35892ea Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 26 Sep 2009 20:20:06 +0530
Subject: ARM: Remove unused CONFIG SA1100_H3XXX

Removed unused CONFIG SA1100_H3XXX from Kconfig and defconfig

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Dmitry Artamonow <mad_soft@inbox.ru>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/h3600_defconfig | 1 -
 arch/arm/mach-sa1100/Kconfig     | 5 -----
 2 files changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 1502957db2c..f6aed7747d4 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 81ffff7ed49..4e5c07f4e45 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,11 +71,6 @@ config SA1100_H3600
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
 	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
-config SA1100_H3XXX
-	bool
-	depends on SA1100_H3100 || SA1100_H3600
-	default y
-
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
 	select SA1111
-- 
cgit v1.2.3


From 9a0f6b4646a0acaf7f06fd2e02f10f303fe85d8f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Tue, 22 Sep 2009 18:37:01 +0530
Subject: ARM: includecheck fix: mach-davinci, board-dm365-evm.c

fix the following 'make includecheck' warning:

  arch/arm/mach-davinci/board-dm365-evm.c: mach/common.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/board-dm365-evm.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index a1d5e7dac74..52dd8046b30 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -35,7 +35,6 @@
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/common.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
 
-- 
cgit v1.2.3


From e616c591405c168f6dc3dfd1221e105adfe49b8d Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 20:55:43 +0100
Subject: ARM: Don't allow highmem on SMP platforms without h/w TLB ops
 broadcast

We suffer an unfortunate combination of "features" which makes highmem
support on platforms without hardware TLB maintainence broadcast difficult:

- we need kmap_high_get() support for DMA cache coherence
- this requires kmap_high() to take a spinlock with IRQs disabled
- kmap_high() occasionally calls flush_all_zero_pkmaps() to clear
  out old mappings
- flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which
  on s/w IPI'd systems eventually calls smp_call_function_many()
- smp_call_function_many() must not be called with IRQs disabled:

WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240()
Modules linked in:
Backtrace:
[<c00306f0>] (dump_backtrace+0x0/0x108) from [<c0286e6c>] (dump_stack+0x18/0x1c)
 r6:c007cd18 r5:c02ff228 r4:0000017c
[<c0286e54>] (dump_stack+0x0/0x1c) from [<c0053e08>] (warn_slowpath_common+0x50/0x80)
[<c0053db8>] (warn_slowpath_common+0x0/0x80) from [<c0053e50>] (warn_slowpath_null+0x18/0x1c)
 r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34
[<c0053e38>] (warn_slowpath_null+0x0/0x1c) from [<c007cd18>] (smp_call_function_many+0xc4/0x240)
[<c007cc54>] (smp_call_function_many+0x0/0x240) from [<c007cec0>] (smp_call_function+0x2c/0x38)
[<c007ce94>] (smp_call_function+0x0/0x38) from [<c005980c>] (on_each_cpu+0x1c/0x38)
[<c00597f0>] (on_each_cpu+0x0/0x38) from [<c0031788>] (flush_tlb_kernel_range+0x50/0x58)
 r6:00000001 r5:00000800 r4:c05f3590
[<c0031738>] (flush_tlb_kernel_range+0x0/0x58) from [<c009c600>] (flush_all_zero_pkmaps+0xc0/0xe8)
[<c009c540>] (flush_all_zero_pkmaps+0x0/0xe8) from [<c009c6b4>] (kmap_high+0x8c/0x1e0)
[<c009c628>] (kmap_high+0x0/0x1e0) from [<c00364a8>] (kmap+0x44/0x5c)
[<c0036464>] (kmap+0x0/0x5c) from [<c0109dfc>] (cramfs_readpage+0x3c/0x194)
[<c0109dc0>] (cramfs_readpage+0x0/0x194) from [<c0090c14>] (__do_page_cache_readahead+0x1f0/0x290)
[<c0090a24>] (__do_page_cache_readahead+0x0/0x290) from [<c0090ce4>] (ra_submit+0x30/0x38)
[<c0090cb4>] (ra_submit+0x0/0x38) from [<c0089384>] (filemap_fault+0x3dc/0x438)
 r4:c1819988
[<c0088fa8>] (filemap_fault+0x0/0x438) from [<c009d21c>] (__do_fault+0x58/0x43c)
[<c009d1c4>] (__do_fault+0x0/0x43c) from [<c009e8cc>] (handle_mm_fault+0x104/0x318)
[<c009e7c8>] (handle_mm_fault+0x0/0x318) from [<c0033c98>] (do_page_fault+0x188/0x1e4)
[<c0033b10>] (do_page_fault+0x0/0x1e4) from [<c0033ddc>] (do_translation_fault+0x7c/0x84)
[<c0033d60>] (do_translation_fault+0x0/0x84) from [<c002b474>] (do_DataAbort+0x40/0xa4)
 r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0
[<c002b434>] (do_DataAbort+0x0/0xa4) from [<c002bcac>] (__dabt_svc+0x4c/0x60)
...

So we disable highmem support on these systems.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/smp_plat.h | 16 ++++++++++++++++
 arch/arm/kernel/smp.c           |  7 +------
 arch/arm/mm/mmu.c               | 37 +++++++++++++++++++++++++++++++++----
 3 files changed, 50 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/include/asm/smp_plat.h

(limited to 'arch')

diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
new file mode 100644
index 00000000000..59303e20084
--- /dev/null
+++ b/arch/arm/include/asm/smp_plat.h
@@ -0,0 +1,16 @@
+/*
+ * ARM specific SMP header, this contains our implementation
+ * details.
+ */
+#ifndef __ASMARM_SMP_PLAT_H
+#define __ASMARM_SMP_PLAT_H
+
+#include <asm/cputype.h>
+
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
+#endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e0d32770bb3..9d015ee5747 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -36,6 +36,7 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
+#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -586,12 +587,6 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ce551ec2cb2..02243eeccf5 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -21,6 +21,7 @@
 #include <asm/cachetype.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
+#include <asm/smp_plat.h>
 #include <asm/tlb.h>
 #include <asm/highmem.h>
 
@@ -709,10 +710,6 @@ static void __init sanity_check_meminfo(void)
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
-			} else if (cache_is_vipt_aliasing()) {
-				printk(KERN_CRIT "HIGHMEM is not yet supported "
-						 "with VIPT aliasing cache, "
-						 "ignoring high memory\n");
 			} else {
 				memmove(bank + 1, bank,
 					(meminfo.nr_banks - i) * sizeof(*bank));
@@ -756,6 +753,38 @@ static void __init sanity_check_meminfo(void)
 #endif
 		j++;
 	}
+#ifdef CONFIG_HIGHMEM
+	if (highmem) {
+		const char *reason = NULL;
+
+		if (cache_is_vipt_aliasing()) {
+			/*
+			 * Interactions between kmap and other mappings
+			 * make highmem support with aliasing VIPT caches
+			 * rather difficult.
+			 */
+			reason = "with VIPT aliasing cache";
+#ifdef CONFIG_SMP
+		} else if (tlb_ops_need_broadcast()) {
+			/*
+			 * kmap_high needs to occasionally flush TLB entries,
+			 * however, if the TLB entries need to be broadcast
+			 * we may deadlock:
+			 *  kmap_high(irqs off)->flush_all_zero_pkmaps->
+			 *  flush_tlb_kernel_range->smp_call_function_many
+			 *   (must not be called with irqs off)
+			 */
+			reason = "without hardware TLB ops broadcasting";
+#endif
+		}
+		if (reason) {
+			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
+				reason);
+			while (j > 0 && meminfo.bank[j - 1].highmem)
+				j--;
+		}
+	}
+#endif
 	meminfo.nr_banks = j;
 }
 
-- 
cgit v1.2.3


From 90140c30a7b8c77e8872a389d48678d78e58789f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 27 Sep 2009 21:04:48 +0100
Subject: ARM: Fix __cpuexit section mismatch warnings

Fix:

WARNING: vmlinux.o(.text+0x247c): Section mismatch in reference from the function cpu_idle() to the function .cpuexit.text:cpu_die()
The function cpu_idle() references a function in an exit section.
Often the function cpu_die() has valid usage outside the exit section
and the fix is to remove the __cpuexit annotation of cpu_die.

WARNING: vmlinux.o(.cpuexit.text+0x3c): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel()
The function __cpuexit cpu_die() references
a function __cpuinit secondary_start_kernel().
This is often seen when error handling in the exit function
uses functionality in the init path.
The fix is often to remove the __cpuinit annotation of
secondary_start_kernel() so it may be used outside an init section.

Sam says:
> The annotation of cpu_die() is wrong.
> To be annotated __cpuexit the function shall:
> - be used in exit context and only in exit context with HOTPLUG_CPU=n
> - be used outside exit context with HOTPLUG_CPU=y

So, this also means __cpu_disable(), __cpu_die() and twd_timer_stop() are
also wrong.  However, removing __cpuexit from cpu_die() creates:

WARNING: vmlinux.o(.text+0x6834): Section mismatch in reference from the function cpu_die() to the function .cpuinit.text:secondary_start_kernel()
The function cpu_die() references
the function __cpuinit secondary_start_kernel().
This is often because cpu_die lacks a __cpuinit
annotation or the annotation of secondary_start_kernel is wrong.

so fix this using __ref.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/arm/kernel/smp.c     | 6 +++---
 arch/arm/kernel/smp_twd.c | 4 +++-
 2 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 9d015ee5747..57162af53dc 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -154,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuexit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct task_struct *p;
@@ -201,7 +201,7 @@ int __cpuexit __cpu_disable(void)
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuexit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
@@ -215,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void __cpuexit cpu_die(void)
+void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index d8c88c633c6..a73a34dccf2 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clockevents_register_device(clk);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * take a local timer down
  */
-void __cpuexit twd_timer_stop(void)
+void twd_timer_stop(void)
 {
 	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 }
+#endif
-- 
cgit v1.2.3


From aa45ee8fc0ee87c1711b5fe8eb3556d06530c39e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Mon, 28 Sep 2009 11:41:51 +0100
Subject: ARM: Ensure do_cache_op takes mmap_sem

do_cache_op() uses find_vma() to validate its arguments without holding
any locking.  This means that the VMA could vanish beneath us.  Fix
this by taking a read lock on mmap_sem.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/traps.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57eb0f6f600..467b69ed102 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -418,12 +418,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
 static inline void
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
+	struct mm_struct *mm = current->active_mm;
 	struct vm_area_struct *vma;
 
 	if (end < start || flags)
 		return;
 
-	vma = find_vma(current->active_mm, start);
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, start);
 	if (vma && vma->vm_start < end) {
 		if (start < vma->vm_start)
 			start = vma->vm_start;
@@ -432,6 +434,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 
 		flush_cache_user_range(vma, start, end);
 	}
+	up_read(&mm->mmap_sem);
 }
 
 /*
-- 
cgit v1.2.3


From a70c691376c7c7f94af41395848066f59501fffd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 24 Sep 2009 18:18:55 +0900
Subject: sparc64: implement page mapping percpu first chunk allocator

Implement page mapping percpu first chunk allocator as a fallback to
the embedding allocator.  The next patch will make the embedding
allocator check distances between units to determine whether it fits
within the vmalloc area so that this fallback can be used on such
cases.

sparc64 currently has relatively small vmalloc area which makes it
impossible to create any dynamic chunks on certain configurations
leading to percpu allocation failures.  This and the next patch should
allow those configurations to keep working until proper solution is
found.

While at it, mark pcpu_cpu_distance() with __init.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig         |  3 +++
 arch/sparc/kernel/smp_64.c | 53 ++++++++++++++++++++++++++++++++++++++--------
 2 files changed, 47 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 97fca4695e0..ac45aab741a 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -102,6 +102,9 @@ config HAVE_SETUP_PER_CPU_AREA
 config NEED_PER_CPU_EMBED_FIRST_CHUNK
 	def_bool y if SPARC64
 
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+	def_bool y if SPARC64
+
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index ff68373ce6d..aa36223497b 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1420,7 +1420,7 @@ static void __init pcpu_free_bootmem(void *ptr, size_t size)
 	free_bootmem(__pa(ptr), size);
 }
 
-static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
 {
 	if (cpu_to_node(from) == cpu_to_node(to))
 		return LOCAL_DISTANCE;
@@ -1428,18 +1428,53 @@ static int pcpu_cpu_distance(unsigned int from, unsigned int to)
 		return REMOTE_DISTANCE;
 }
 
+static void __init pcpu_populate_pte(unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+	pud_t *pud;
+	pmd_t *pmd;
+
+	pud = pud_offset(pgd, addr);
+	if (pud_none(*pud)) {
+		pmd_t *new;
+
+		new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+		pud_populate(&init_mm, pud, new);
+	}
+
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd)) {
+		pte_t *new;
+
+		new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+		pmd_populate_kernel(&init_mm, pmd, new);
+	}
+}
+
 void __init setup_per_cpu_areas(void)
 {
 	unsigned long delta;
 	unsigned int cpu;
-	int rc;
-
-	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
-				    PERCPU_DYNAMIC_RESERVE, 4 << 20,
-				    pcpu_cpu_distance, pcpu_alloc_bootmem,
-				    pcpu_free_bootmem);
-	if (rc)
-		panic("failed to initialize first chunk (%d)", rc);
+	int rc = -EINVAL;
+
+	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+		rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+					    PERCPU_DYNAMIC_RESERVE, 4 << 20,
+					    pcpu_cpu_distance,
+					    pcpu_alloc_bootmem,
+					    pcpu_free_bootmem);
+		if (rc)
+			pr_warning("PERCPU: %s allocator failed (%d), "
+				   "falling back to page size\n",
+				   pcpu_fc_names[pcpu_chosen_fc], rc);
+	}
+	if (rc < 0)
+		rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE,
+					   pcpu_alloc_bootmem,
+					   pcpu_free_bootmem,
+					   pcpu_populate_pte);
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu)
-- 
cgit v1.2.3


From e207e143e2fb6a2790b1ce3687c8aedc3ddc357b Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 30 Sep 2009 07:48:37 -0700
Subject: Revert "x86, mce: do not compile mcelog message on AMD"

This reverts commit 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9, as
requested by Andi Kleen:

  "Obviously kernels compiled with AMD support can still run on non AMD
   systems, so messages like this can never be removed at compile time."

Requsted-by: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 4b2af86e3e8..183c3457d2f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -204,10 +204,7 @@ static void print_mce_head(void)
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
-	       "Run through mcelog --ascii to decode and contact your hardware vendor\n"
-#endif
-	       );
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
-- 
cgit v1.2.3


From 6fae5311a9effecf0aba690b64722d273d6e726f Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 18 Sep 2009 15:14:19 +0800
Subject: MIPS: BCM63xx: Remove duplicated #include

Remove duplicated #include in arch/mips/bcm63xx/boards/board_bcm963xx.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/bcm63xx/boards/board_bcm963xx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index fd77f548207..12add0ca9fe 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -20,7 +20,6 @@
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
-#include <bcm63xx_board.h>
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
-- 
cgit v1.2.3


From 742db5d1085df97354ce65daf9b6b657696d5268 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Fri, 18 Sep 2009 15:14:35 +0800
Subject: MIPS: Remove duplicated #include

Remove duplicated #include in arch/mips/kernel/smp.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/smp.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 4eb106c6a3e..09e8dcf7283 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -32,7 +32,6 @@
 #include <linux/cpumask.h>
 #include <linux/cpu.h>
 #include <linux/err.h>
-#include <linux/smp.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
-- 
cgit v1.2.3


From b265158399ad825411f3d471cacc46b00d0e4841 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 21 Sep 2009 17:08:55 +0200
Subject: MIPS: SMTC: Remove duplicate structure field initialization

The definition of the irq_ipi structure has two initializations of the
flags field.  This combines them.

[Ralf: The issue was originally introduced by commit
be4894196d79455f420dd7bb78be7dc73bec115c (linux-mips.org) rsp.
033890b084adfa367c544864451d7730552ce8bf (kernel.org).  The original
intention of the code was to initialize .flags with both flags ored together.
The broken C code as actually implemented will be compiled by an equally
broken gcc to use only the last initialization, that is IRQF_PERCPU
which means this turned into an SMTC bug for 2.6.23 and newer.]

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier I, s, fld;
position p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@s@
identifier I, s, r.fld;
position r.p0,p;
expression E;
@@

struct I s =@p0 { ... .fld@p = E, ...};

@script:python@
p0 << r.p0;
fld << r.fld;
ps << s.p;
pr << r.p;
@@

if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column):
  cocci.print_main(fld,p0)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/smtc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 67153a0dc26..4d181df44a4 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1098,9 +1098,8 @@ static void ipi_irq_dispatch(void)
 
 static struct irqaction irq_ipi = {
 	.handler	= ipi_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "SMTC_IPI",
-	.flags		= IRQF_PERCPU
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "SMTC_IPI"
 };
 
 static void setup_cross_vpe_interrupts(unsigned int nvpe)
-- 
cgit v1.2.3


From 8813d33ee03eee04eb2a8130658d591767d9f4fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Mon, 21 Sep 2009 10:40:37 +0200
Subject: MIPS: Loongson2: Fix typo "enalbe" -> "enable"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Yanhua <yanh@lemote.com>
Cc: Robert Richter <robert.richter@amd.com>
Acked-by: Wu Zhangjin <wuzj@lemote.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/oprofile/op_model_loongson2.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 655cb8dec34..deed1d5d498 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -44,7 +44,7 @@ static struct loongson2_register_config {
 	unsigned int ctrl;
 	unsigned long long reset_counter1;
 	unsigned long long reset_counter2;
-	int cnt1_enalbed, cnt2_enalbed;
+	int cnt1_enabled, cnt2_enabled;
 } reg;
 
 DEFINE_SPINLOCK(sample_lock);
@@ -81,8 +81,8 @@ static void loongson2_reg_setup(struct op_counter_config *cfg)
 
 	reg.ctrl = ctrl;
 
-	reg.cnt1_enalbed = cfg[0].enabled;
-	reg.cnt2_enalbed = cfg[1].enabled;
+	reg.cnt1_enabled = cfg[0].enabled;
+	reg.cnt2_enabled = cfg[1].enabled;
 
 }
 
@@ -99,7 +99,7 @@ static void loongson2_cpu_setup(void *args)
 static void loongson2_cpu_start(void *args)
 {
 	/* Start all counters on current CPU */
-	if (reg.cnt1_enalbed || reg.cnt2_enalbed)
+	if (reg.cnt1_enabled || reg.cnt2_enabled)
 		write_c0_perfctrl(reg.ctrl);
 }
 
@@ -125,7 +125,7 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	 */
 
 	/* Check whether the irq belongs to me */
-	enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
+	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
 	if (!enabled)
 		return IRQ_NONE;
 
@@ -136,12 +136,12 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	spin_lock_irqsave(&sample_lock, flags);
 
 	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt1_enalbed)
+		if (reg.cnt1_enabled)
 			oprofile_add_sample(regs, 0);
 		counter1 = reg.reset_counter1;
 	}
 	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt2_enalbed)
+		if (reg.cnt2_enabled)
 			oprofile_add_sample(regs, 1);
 		counter2 = reg.reset_counter2;
 	}
-- 
cgit v1.2.3


From 9fcd66e572b94974365a9119b073e0a43d496eb7 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Fri, 18 Sep 2009 13:04:58 +0200
Subject: MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/bcm63xx/Makefile                         |  2 +-
 arch/mips/bcm63xx/boards/board_bcm963xx.c          |  3 ++
 arch/mips/bcm63xx/dev-uart.c                       | 41 ++++++++++++++++++++++
 .../include/asm/mach-bcm63xx/bcm63xx_dev_uart.h    |  6 ++++
 4 files changed, 51 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm63xx/dev-uart.c
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h

(limited to 'arch')

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index aaa585cf26e..cff75de8449 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,5 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o dev-enet.o
+		   dev-dsp.o dev-enet.o dev-uart.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 12add0ca9fe..5a327f3a716 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -23,6 +23,7 @@
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_uart.h>
 #include <board_bcm963xx.h>
 
 #define PFX	"board_bcm963xx: "
@@ -792,6 +793,8 @@ int __init board_register_devices(void)
 {
 	u32 val;
 
+	bcm63xx_uart_register();
+
 	if (board.has_enet0 &&
 	    !board_get_mac_address(board.enet0.mac_addr))
 		bcm63xx_enet_register(0, &board.enet0);
diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
new file mode 100644
index 00000000000..5f3d89c4a98
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-uart.c
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
+
+static struct resource uart_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_uart_device = {
+	.name		= "bcm63xx_uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(uart_resources),
+	.resource	= uart_resources,
+};
+
+int __init bcm63xx_uart_register(void)
+{
+	uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+	uart_resources[0].end = uart_resources[0].start;
+	uart_resources[0].end += RSET_UART_SIZE - 1;
+	uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+	return platform_device_register(&bcm63xx_uart_device);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
new file mode 100644
index 00000000000..bf348f573bb
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_UART_H_
+#define BCM63XX_DEV_UART_H_
+
+int bcm63xx_uart_register(void);
+
+#endif /* BCM63XX_DEV_UART_H_ */
-- 
cgit v1.2.3


From 0863be2e8ecc296df6f7fd7cb16e4929b727351d Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Wed, 23 Sep 2009 21:37:08 +0100
Subject: MIPS: BCM1480: Re-apply patch lost due to bad resolution of merge
 conflict.

Patch 14275ccdb1e4b487cca745aba994699c426a31ee and
d5dedd4507d307eb3f35f21b6e16f336fdc0d82a are conflicting and the
conflict was resolved badly in merge
92241940be501f798cb21db344bbb3d1ec3c4f1c resulting in the BCM1480 changes
of 14275ccdb1e4b487cca745aba994699c426a31ee getting lost.  Sort out the
damage.

Reported and initial patch by Mark Mason <mmason@upwardaccess.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sibyte/bcm1480/irq.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index ba59839a021..4070268aa76 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -117,10 +117,6 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 	unsigned long flags;
 	unsigned int irq_dirty;
 
-	if (cpumask_weight(mask) != 1) {
-		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return -1;
-	}
 	i = cpumask_first(mask);
 
 	/* Convert logical CPU to physical CPU */
-- 
cgit v1.2.3


From a648e8119666782f21b509a7886be9b281e41ccb Mon Sep 17 00:00:00 2001
From: Mark Mason <mmason@upwardaccess.com>
Date: Wed, 23 Sep 2009 13:35:09 -0700
Subject: MIPS: Sibyte: Fix compilation error.

Build error introduced by d4f587c67fc39e0030ddd718675e252e208da4d7.

Signed-off-by: Mark Mason <mmason@upwardaccess.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sibyte/swarm/setup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 623ffc933c4..5277aac96b0 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -106,7 +106,7 @@ void read_persistent_clock(struct timespec *ts)
 		break;
 	}
 	ts->tv_sec = sec;
-	tv->tv_nsec = 0;
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long sec)
-- 
cgit v1.2.3


From 96983ffefce46312e9372d357309dda413553009 Mon Sep 17 00:00:00 2001
From: Kevin Cernekee <cernekee@gmail.com>
Date: Fri, 18 Sep 2009 19:12:45 -0700
Subject: MIPS: MIPSxx SC: Avoid destructive invalidation on partial L2
 cachelines.

This extends commit a8ca8b64e3fdfec17679cba0ca5ce6e3ffed092d to cover
MIPSxx-style board cache code.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/sc-mips.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index b55c2d1b998..5ab5fa8c1d8 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -32,6 +32,11 @@ static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
  */
 static void mips_sc_inv(unsigned long addr, unsigned long size)
 {
+	unsigned long lsize = cpu_scache_line_size();
+	unsigned long almask = ~(lsize - 1);
+
+	cache_op(Hit_Writeback_Inv_SD, addr & almask);
+	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
 	blast_inv_scache_range(addr, addr + size);
 }
 
-- 
cgit v1.2.3


From b533e652df3bbb8f0ea63dc22054edf4cd4155df Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 25 Sep 2009 15:08:01 +0100
Subject: MIPS: SMP: Fix build.

commit 48a048fed82a8e5fdd8618574f6d3de1a0d67a50
Author: Rusty Russell <rusty@rustcorp.com.au>
Date:   Thu Sep 24 09:34:44 2009 -0600

apparently only passed the "looks good" level of QA ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/smp.c        | 2 +-
 arch/mips/sgi-ip27/ip27-smp.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 09e8dcf7283..d74b4dd2dfb 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -137,7 +137,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask)
  */
 void arch_send_call_function_single_ipi(int cpu)
 {
-	mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
+	mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
 }
 
 /*
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 9aa8f2951df..c6851df9ab7 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -165,7 +165,7 @@ static void ip27_send_ipi_single(int destid, unsigned int action)
 	REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
 }
 
-static void ip27_send_ipi(const struct cpumask *mask, unsigned int action)
+static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
-- 
cgit v1.2.3


From eef34ec514054e4685745236dd5c9658f7aca69e Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 25 Sep 2009 15:35:28 +0100
Subject: MIPS: SMP: Inline arch_send_call_function_{single_ipi,ipi_mask}

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/smp.h | 15 +++++++++++++--
 arch/mips/kernel/smp.c      | 13 -------------
 2 files changed, 13 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index e15f11a0931..af42385245d 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -77,7 +77,18 @@ extern void play_dead(void);
 
 extern asmlinkage void smp_call_function_interrupt(void);
 
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
+}
+
+static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
+}
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index d74b4dd2dfb..e72e6844d13 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -127,19 +127,6 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu_idle();
 }
 
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
-	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
-}
-
-/*
- * We reuse the same vector for the single IPI
- */
-void arch_send_call_function_single_ipi(int cpu)
-{
-	mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
-}
-
 /*
  * Call into both interrupt handlers, as we share the IPI for them
  */
-- 
cgit v1.2.3


From c2e32149074501fc12f6e05f85812e07148a2276 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 12:50:10 -0700
Subject: MIPS: Decrease size of au1xxx_dbdma_pm_regs[][]

There are 16 individual channels (NUM_DBDMA_CHANS) to save/restore plus the
global ddma block config (the +1).  The last register in a channel can be
skipped since it's read-only (at offset 0x18).

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/dbdma.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 3ab6d80d150..19c1c82849f 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -175,7 +175,7 @@ static dbdev_tab_t dbdev_tab[] = {
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
 #ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
 #endif
 
 
@@ -993,14 +993,13 @@ void au1xxx_dbdma_suspend(void)
 	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
 
 	/* save channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
 		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
 		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
 		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
 		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
 		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
-		au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
 
 		/* halt channel */
 		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
@@ -1027,14 +1026,13 @@ void au1xxx_dbdma_resume(void)
 	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
 		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
 		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
 		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
 		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
 		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
-		au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
 		au_sync();
 		addr += 0x100;	/* next channel base */
 	}
-- 
cgit v1.2.3


From 971842677c5a6c1dd15d9a80b67bf0085686e574 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 18 Sep 2009 12:50:11 -0700
Subject: MIPS: MSP71xx: request_irq() failure ignored in
 msp_pcibios_config_access()

Produce an error if request_irq() fails.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: "Ithamar R. Adema" <ithamar.adema@team-embedded.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pci/ops-pmcmsp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 109c95ca698..32548b5d68d 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -385,6 +385,7 @@ int msp_pcibios_config_access(unsigned char access_type,
 	unsigned long intr;
 	unsigned long value;
 	static char pciirqflag;
+	int ret;
 #if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
 	unsigned int	vpe_status;
 #endif
@@ -402,11 +403,13 @@ int msp_pcibios_config_access(unsigned char access_type,
 	 * allocation assigns an interrupt handler to the interrupt.
 	 */
 	if (pciirqflag == 0) {
-		request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
+		ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
 				bpci_interrupt,
 				IRQF_SHARED | IRQF_DISABLED,
 				"PMC MSP PCI Host",
 				preg);
+		if (ret != 0)
+			return ret;
 		pciirqflag = ~0;
 	}
 
-- 
cgit v1.2.3


From 553d6d5f5b84f11fad8043688137dac96df1a06d Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Mon, 28 Sep 2009 14:49:43 +0200
Subject: MIPS: BCM63xx: Add PCMCIA & Cardbus support.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/bcm63xx/Makefile                         |   2 +-
 arch/mips/bcm63xx/boards/board_bcm963xx.c          |   4 +
 arch/mips/bcm63xx/dev-pcmcia.c                     | 144 +++++++++++++++++++++
 .../include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h  |  13 ++
 4 files changed, 162 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c
 create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h

(limited to 'arch')

diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index cff75de8449..c146d1edede 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,5 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o dev-enet.o dev-uart.o
+		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 5a327f3a716..78e155d21be 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -23,6 +23,7 @@
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
 #include <bcm63xx_dev_uart.h>
 #include <board_bcm963xx.h>
 
@@ -795,6 +796,9 @@ int __init board_register_devices(void)
 
 	bcm63xx_uart_register();
 
+	if (board.has_pccard)
+		bcm63xx_pcmcia_register();
+
 	if (board.has_enet0 &&
 	    !board_get_mac_address(board.enet0.mac_addr))
 		bcm63xx_enet_register(0, &board.enet0);
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
new file mode 100644
index 00000000000..de4d917fd54
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource pcmcia_resources[] = {
+	/* pcmcia registers */
+	{
+		/* start & end filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* pcmcia memory zone resources */
+	{
+		.start		= BCM_PCMCIA_COMMON_BASE_PA,
+		.end		= BCM_PCMCIA_COMMON_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_ATTR_BASE_PA,
+		.end		= BCM_PCMCIA_ATTR_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* PCMCIA irq */
+	{
+		/* start filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+
+	/* declare PCMCIA IO resource also */
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_IO,
+	},
+};
+
+static struct bcm63xx_pcmcia_platform_data pd;
+
+static struct platform_device bcm63xx_pcmcia_device = {
+	.name		= "bcm63xx_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pcmcia_resources),
+	.resource	= pcmcia_resources,
+	.dev		= {
+		.platform_data = &pd,
+	},
+};
+
+static int __init config_pcmcia_cs(unsigned int cs,
+				   u32 base, unsigned int size)
+{
+	int ret;
+
+	ret = bcm63xx_set_cs_status(cs, 0);
+	if (!ret)
+		ret = bcm63xx_set_cs_base(cs, base, size);
+	if (!ret)
+		ret = bcm63xx_set_cs_status(cs, 1);
+	return ret;
+}
+
+static const __initdata struct {
+	unsigned int	cs;
+	unsigned int	base;
+	unsigned int	size;
+} pcmcia_cs[3] = {
+	{
+		.cs	= MPI_CS_PCMCIA_COMMON,
+		.base	= BCM_PCMCIA_COMMON_BASE_PA,
+		.size	= BCM_PCMCIA_COMMON_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_ATTR,
+		.base	= BCM_PCMCIA_ATTR_BASE_PA,
+		.size	= BCM_PCMCIA_ATTR_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_IO,
+		.base	= BCM_PCMCIA_IO_BASE_PA,
+		.size	= BCM_PCMCIA_IO_SIZE
+	},
+};
+
+int __init bcm63xx_pcmcia_register(void)
+{
+	int ret, i;
+
+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+		return 0;
+
+	/* use correct pcmcia ready gpio depending on processor */
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6348_CPU_ID:
+		pd.ready_gpio = 22;
+		break;
+
+	case BCM6358_CPU_ID:
+		pd.ready_gpio = 18;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+	pcmcia_resources[0].end = pcmcia_resources[0].start +
+		RSET_PCMCIA_SIZE - 1;
+	pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
+
+	/* configure pcmcia chip selects */
+	for (i = 0; i < 3; i++) {
+		ret = config_pcmcia_cs(pcmcia_cs[i].cs,
+				       pcmcia_cs[i].base,
+				       pcmcia_cs[i].size);
+		if (ret)
+			goto out_err;
+	}
+
+	return platform_device_register(&bcm63xx_pcmcia_device);
+
+out_err:
+	printk(KERN_ERR "unable to set pcmcia chip select\n");
+	return ret;
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
new file mode 100644
index 00000000000..2beb3969ce3
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
@@ -0,0 +1,13 @@
+#ifndef BCM63XX_DEV_PCMCIA_H_
+#define BCM63XX_DEV_PCMCIA_H_
+
+/*
+ * PCMCIA driver platform data
+ */
+struct bcm63xx_pcmcia_platform_data {
+	unsigned int ready_gpio;
+};
+
+int bcm63xx_pcmcia_register(void);
+
+#endif /* BCM63XX_DEV_PCMCIA_H_ */
-- 
cgit v1.2.3


From 36ac829e5a6ab29a6fd990588d170438bfb5c7a0 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 28 Sep 2009 16:57:54 +0100
Subject: MIPS: Sibyte: Get rid of BKL.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sibyte/common/sb_tbprof.c | 33 +++++++++++++++------------------
 1 file changed, 15 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 637a194e5cd..15ea778b5e6 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -403,36 +403,31 @@ static int sbprof_zbprof_stop(void)
 static int sbprof_tb_open(struct inode *inode, struct file *filp)
 {
 	int minor;
-	int err = 0;
 
-	lock_kernel();
 	minor = iminor(inode);
-	if (minor != 0) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (minor != 0)
+		return -ENODEV;
 
-	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) {
-		err = -EBUSY;
-		goto out;
-	}
+	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
+		return -EBUSY;
 
 	memset(&sbp, 0, sizeof(struct sbprof_tb));
 	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
 	if (!sbp.sbprof_tbbuf) {
-		err = -ENOMEM;
-		goto out;
+		sbp.open = SB_CLOSED;
+		wmb();
+		return -ENOMEM;
 	}
+
 	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
 	init_waitqueue_head(&sbp.tb_sync);
 	init_waitqueue_head(&sbp.tb_read);
 	mutex_init(&sbp.lock);
 
 	sbp.open = SB_OPEN;
+	wmb();
 
-  out:
-	unlock_kernel();
-	return err;
+	return 0;
 }
 
 static int sbprof_tb_release(struct inode *inode, struct file *filp)
@@ -440,7 +435,7 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp)
 	int minor;
 
 	minor = iminor(inode);
-	if (minor != 0 || !sbp.open)
+	if (minor != 0 || sbp.open != SB_CLOSED)
 		return -ENODEV;
 
 	mutex_lock(&sbp.lock);
@@ -449,7 +444,8 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp)
 		sbprof_zbprof_stop();
 
 	vfree(sbp.sbprof_tbbuf);
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 
 	mutex_unlock(&sbp.lock);
 
@@ -583,7 +579,8 @@ static int __init sbprof_tb_init(void)
 	}
 	tb_dev = dev;
 
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 	tb_period = zbbus_mhz * 10000LL;
 	pr_info(DEVNAME ": initialized - tb_period = %lld\n",
 		(long long) tb_period);
-- 
cgit v1.2.3


From b7a05871aac3a75a48faebcde92d881f9625c066 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 28 Sep 2009 16:59:12 +0100
Subject: MIPS: Excite: Get rid of BKL.

It's not obvious what good it was supposed to do here anyway.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/basler/excite/excite_iodev.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
index dfbfd7e2ac0..938b1d0b765 100644
--- a/arch/mips/basler/excite/excite_iodev.c
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -112,10 +112,8 @@ static int iodev_open(struct inode *i, struct file *f)
 {
 	int ret;
 
-	lock_kernel();
 	ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
 			   iodev_name, &miscdev);
-	unlock_kernel();
 
 	return ret;
 }
-- 
cgit v1.2.3


From c0648e02db689b03564882044f32bc6c6e70c229 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 29 Sep 2009 00:19:20 +0100
Subject: MIPS: VPE: Fix build after the credential changes a while ago.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/kspd.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index f2397f00db4..ad4e017ed2f 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -172,13 +172,20 @@ static unsigned int translate_open_flags(int flags)
 }
 
 
-static void sp_setfsuidgid( uid_t uid, gid_t gid)
+static int sp_setfsuidgid(uid_t uid, gid_t gid)
 {
-	current->cred->fsuid = uid;
-	current->cred->fsgid = gid;
+	struct cred *new;
 
-	key_fsuid_changed(current);
-	key_fsgid_changed(current);
+	new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	new->fsuid = uid;
+	new->fsgid = gid;
+
+	commit_creds(new);
+
+	return 0;
 }
 
 /*
@@ -196,7 +203,7 @@ void sp_work_handle_request(void)
 	mm_segment_t old_fs;
 	struct timeval tv;
 	struct timezone tz;
-	int cmd;
+	int err, cmd;
 
 	char *vcwd;
 	int size;
@@ -225,8 +232,11 @@ void sp_work_handle_request(void)
 	/* Run the syscall at the privilege of the user who loaded the
 	   SP program */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+		if (!err)
+			pr_err("Change of creds failed\n");
+	}
 
 	switch (sc.cmd) {
 	/* needs the flags argument translating from SDE kit to
@@ -283,8 +293,11 @@ void sp_work_handle_request(void)
 		break;
  	} /* switch */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid( 0, 0);
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(0, 0);
+		if (!err)
+			pr_err("restoring old creds failed\n");
+	}
 
 	old_fs = get_fs();
 	set_fs(KERNEL_DS);
-- 
cgit v1.2.3


From 1bbfc20d0161cd94b1b8111566be2fa41b41b608 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 29 Sep 2009 00:52:27 +0100
Subject: MIPS: VPE: Get rid of BKL.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/rtlx.c | 15 +++-------
 arch/mips/kernel/vpe.c  | 77 +++++++++++++++++++++++++++++--------------------
 2 files changed, 50 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index a10ebfdc28a..364f066cb49 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,8 +72,9 @@ static void rtlx_dispatch(void)
 */
 static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
 {
+	unsigned int vpeflags;
+	unsigned long flags;
 	int i;
-	unsigned int flags, vpeflags;
 
 	/* Ought not to be strictly necessary for SMTC builds */
 	local_irq_save(flags);
@@ -392,20 +393,12 @@ out:
 
 static int file_open(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-	int err;
-
-	lock_kernel();
-	err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
-	unlock_kernel();
-	return err;
+	return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1);
 }
 
 static int file_release(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-
-	return rtlx_release(minor);
+	return rtlx_release(iminor(inode));
 }
 
 static unsigned int file_poll(struct file *file, poll_table * wait)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eb6c4c5b7fb..03092ab2a29 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -144,14 +144,15 @@ struct tc {
 };
 
 struct {
-	/* Virtual processing elements */
-	struct list_head vpe_list;
-
-	/* Thread contexts */
-	struct list_head tc_list;
+	spinlock_t vpe_list_lock;
+	struct list_head vpe_list;	/* Virtual processing elements */
+	spinlock_t tc_list_lock;
+	struct list_head tc_list;	/* Thread contexts */
 } vpecontrol = {
-	.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
-	.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
+	.vpe_list_lock	= SPIN_LOCK_UNLOCKED,
+	.vpe_list	= LIST_HEAD_INIT(vpecontrol.vpe_list),
+	.tc_list_lock	= SPIN_LOCK_UNLOCKED,
+	.tc_list	= LIST_HEAD_INIT(vpecontrol.tc_list)
 };
 
 static void release_progmem(void *ptr);
@@ -159,28 +160,38 @@ static void release_progmem(void *ptr);
 /* get the vpe associated with this minor */
 static struct vpe *get_vpe(int minor)
 {
-	struct vpe *v;
+	struct vpe *res, *v;
 
 	if (!cpu_has_mipsmt)
 		return NULL;
 
+	res = NULL;
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
-		if (v->minor == minor)
-			return v;
+		if (v->minor == minor) {
+			res = v;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
-	return NULL;
+	return res;
 }
 
 /* get the vpe associated with this minor */
 static struct tc *get_tc(int index)
 {
-	struct tc *t;
+	struct tc *res, *t;
 
+	res = NULL;
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_for_each_entry(t, &vpecontrol.tc_list, list) {
-		if (t->index == index)
-			return t;
+		if (t->index == index) {
+			res = t;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 	return NULL;
 }
@@ -190,15 +201,17 @@ static struct vpe *alloc_vpe(int minor)
 {
 	struct vpe *v;
 
-	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
 		return NULL;
-	}
 
 	INIT_LIST_HEAD(&v->tc);
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_add_tail(&v->list, &vpecontrol.vpe_list);
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
 	INIT_LIST_HEAD(&v->notify);
 	v->minor = minor;
+
 	return v;
 }
 
@@ -212,7 +225,10 @@ static struct tc *alloc_tc(int index)
 
 	INIT_LIST_HEAD(&tc->tc);
 	tc->index = index;
+
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_add_tail(&tc->list, &vpecontrol.tc_list);
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 out:
 	return tc;
@@ -227,7 +243,7 @@ static void release_vpe(struct vpe *v)
 	kfree(v);
 }
 
-static void dump_mtregs(void)
+static void __maybe_unused dump_mtregs(void)
 {
 	unsigned long val;
 
@@ -1048,20 +1064,19 @@ static int vpe_open(struct inode *inode, struct file *filp)
 	enum vpe_state state;
 	struct vpe_notifications *not;
 	struct vpe *v;
-	int ret, err = 0;
+	int ret;
 
-	lock_kernel();
 	if (minor != iminor(inode)) {
 		/* assume only 1 device at the moment. */
-		printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: only vpe1 is supported\n");
+
+		return -ENODEV;
 	}
 
 	if ((v = get_vpe(tclimit)) == NULL) {
-		printk(KERN_WARNING "VPE loader: unable to get vpe\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: unable to get vpe\n");
+
+		return -ENODEV;
 	}
 
 	state = xchg(&v->state, VPE_STATE_INUSE);
@@ -1101,8 +1116,8 @@ static int vpe_open(struct inode *inode, struct file *filp)
 	v->shared_ptr = NULL;
 	v->__start = 0;
 
-out:
 	unlock_kernel();
+
 	return 0;
 }
 
@@ -1594,14 +1609,14 @@ static void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
+	device_del(&vpe_device);
+	unregister_chrdev(major, module_name);
+
+	/* No locking needed here */
 	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
-		if (v->state != VPE_STATE_UNUSED) {
+		if (v->state != VPE_STATE_UNUSED)
 			release_vpe(v);
-		}
 	}
-
-	device_del(&vpe_device);
-	unregister_chrdev(major, module_name);
 }
 
 module_init(vpe_module_init);
-- 
cgit v1.2.3


From da3a7a2b9f9776f2d44ed9a4b40eabeb17c6e886 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 29 Sep 2009 10:14:17 +0200
Subject: MIPS: Avoid spurious make includecheck message

arch/mips/include/asm/unaligned.h: linux/unaligned/generic.h is included more than once.

Entirely legitimate but just noise.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/unaligned.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
index 79240494857..42f66c31147 100644
--- a/arch/mips/include/asm/unaligned.h
+++ b/arch/mips/include/asm/unaligned.h
@@ -12,17 +12,17 @@
 #if defined(__MIPSEB__)
 # include <linux/unaligned/be_struct.h>
 # include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_be
 # define put_unaligned	__put_unaligned_be
 #elif defined(__MIPSEL__)
 # include <linux/unaligned/le_struct.h>
 # include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_le
 # define put_unaligned	__put_unaligned_le
 #else
 #  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
 #endif
 
+# include <linux/unaligned/generic.h>
+
 #endif /* _ASM_MIPS_UNALIGNED_H */
-- 
cgit v1.2.3


From 79e1dd05d1a22e95ab6d54d21836f478b3b56976 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@infradead.org>
Date: Wed, 30 Sep 2009 17:07:54 +0200
Subject: x86: Provide an alternative() based cmpxchg64()

cmpxchg64() today generates, to quote Linus, "barf bag" code.

cmpxchg64() is about to get used in the scheduler to fix a bug there,
but it's a prerequisite that cmpxchg64() first be made non-sucking.

This patch turns cmpxchg64() into an efficient implementation that
uses the alternative() mechanism to just use the raw instruction on
all modern systems.

Note: the fallback is NOT smp safe, just like the current fallback
is not SMP safe. (Interested parties with i486 based SMP systems
are welcome to submit fix patches for that.)

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
[ fixed asm constraint bug ]
Fixed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090930170754.0886ff2e@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/cmpxchg_32.h | 30 ++++++++++++---------
 arch/x86/kernel/i386_ksyms_32.c   |  8 ++++++
 arch/x86/lib/Makefile             |  2 +-
 arch/x86/lib/cmpxchg8b_emu.S      | 57 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 83 insertions(+), 14 deletions(-)
 create mode 100644 arch/x86/lib/cmpxchg8b_emu.S

(limited to 'arch')

diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index 82ceb788a98..ee1931be659 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -312,19 +312,23 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
 
 extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
 
-#define cmpxchg64(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 4))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg64((ptr),		\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	__ret;								\
-})
+#define cmpxchg64(ptr, o, n)					\
+({								\
+	__typeof__(*(ptr)) __ret;				\
+	__typeof__(*(ptr)) __old = (o);				\
+	__typeof__(*(ptr)) __new = (n);				\
+	alternative_io("call cmpxchg8b_emu",			\
+			"lock; cmpxchg8b (%%esi)" ,		\
+		       X86_FEATURE_CX8,				\
+		       "=A" (__ret),				\
+		       "S" ((ptr)), "0" (__old),		\
+		       "b" ((unsigned int)__new),		\
+		       "c" ((unsigned int)(__new>>32))		\
+		       : "memory");				\
+	__ret; })
+
+
+
 #define cmpxchg64_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 43cec6bdda6..1736c5a725a 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -10,6 +10,14 @@
 EXPORT_SYMBOL(mcount);
 #endif
 
+/*
+ * Note, this is a prototype to get at the symbol for
+ * the export, but dont use it from C code, it is used
+ * by assembly code and is not using C calling convention!
+ */
+extern void cmpxchg8b_emu(void);
+EXPORT_SYMBOL(cmpxchg8b_emu);
+
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial_copy_generic);
 
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 9e609206fac..3e549b8ec8c 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -15,7 +15,7 @@ ifeq ($(CONFIG_X86_32),y)
         obj-y += atomic64_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
-        lib-y += semaphore_32.o string_32.o
+        lib-y += semaphore_32.o string_32.o cmpxchg8b_emu.o
 
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S
new file mode 100644
index 00000000000..828cb710dec
--- /dev/null
+++ b/arch/x86/lib/cmpxchg8b_emu.S
@@ -0,0 +1,57 @@
+/*
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; version 2
+ *	of the License.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/frame.h>
+#include <asm/dwarf2.h>
+
+
+.text
+
+/*
+ * Inputs:
+ * %esi : memory location to compare
+ * %eax : low 32 bits of old value
+ * %edx : high 32 bits of old value
+ * %ebx : low 32 bits of new value
+ * %ecx : high 32 bits of new value
+ */
+ENTRY(cmpxchg8b_emu)
+CFI_STARTPROC
+
+#
+# Emulate 'cmpxchg8b (%esi)' on UP except we don't
+# set the whole ZF thing (caller will just compare
+# eax:edx with the expected value)
+#
+cmpxchg8b_emu:
+	pushfl
+	cli
+
+	cmpl  (%esi), %eax
+	jne not_same
+	cmpl 4(%esi), %edx
+	jne half_same
+
+	movl %ebx,  (%esi)
+	movl %ecx, 4(%esi)
+
+	popfl
+	ret
+
+ not_same:
+	movl  (%esi), %eax
+ half_same:
+	movl 4(%esi), %edx
+
+	popfl
+	ret
+
+CFI_ENDPROC
+ENDPROC(cmpxchg8b_emu)
-- 
cgit v1.2.3


From ee17962e249024ebba72acbfe7cf54f8ea5b72f8 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 28 Sep 2009 12:36:18 +0100
Subject: ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3

The #ifdefs in the MMCI driver were erroneous and just masking
a bug in the U300 generic GPIO implementation. This removes the
ifdefs and fixes the U300 generic GPIO instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/gpio.c              | 10 ++++++++++
 arch/arm/mach-u300/include/mach/gpio.h |  1 +
 2 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 63c8f27fb15..0b35826b7d1 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -281,6 +281,16 @@ int gpio_unregister_callback(unsigned gpio)
 }
 EXPORT_SYMBOL(gpio_unregister_callback);
 
+/* Non-zero means valid */
+int gpio_is_valid(int number)
+{
+	if (number >= 0 &&
+	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
+		return 1;
+	return 0;
+}
+EXPORT_SYMBOL(gpio_is_valid);
+
 int gpio_request(unsigned gpio, const char *label)
 {
 	if (gpio_pin[gpio].users)
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index c8174128d7e..7b1fc984abb 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -258,6 +258,7 @@
 #define PIN_TO_PORT(val) (val >> 3)
 
 /* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_is_valid(int number);
 extern int gpio_request(unsigned gpio, const char *label);
 extern void gpio_free(unsigned gpio);
 extern int gpio_direction_input(unsigned gpio);
-- 
cgit v1.2.3


From 5950bd3897de70c8085f328287183c800424749a Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Mon, 28 Sep 2009 21:41:46 +0100
Subject: ARM: 5732/1: remove redundant include file

Remove duplicated #include('s) in arch/arm/mach-bcmring/core.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 492c649f451..d3bf29baa3a 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -31,7 +31,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <linux/amba/bus.h>
 #include <mach/csp/mm_addr.h>
 #include <mach/hardware.h>
 #include <asm/clkdev.h>
-- 
cgit v1.2.3


From ca6cfa83463d1437895dc7e2e1b197e90dd07610 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Mon, 28 Sep 2009 21:56:19 +0100
Subject: ARM: 5733/1: fix bcmring compile error

The movement of the MMCI header file made bcmring break. It turns
out it was including asm/mmc.h without using it so fixing the
problem boils down to removing the offending include.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/core.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index d3bf29baa3a..4b4f69251b3 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -44,7 +44,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <cfg_global.h>
 
-- 
cgit v1.2.3


From 6176d39471943a2e574782cbf62deded19b96aa0 Mon Sep 17 00:00:00 2001
From: Dmitry Artamonow <mad_soft@inbox.ru>
Date: Tue, 29 Sep 2009 06:12:37 +0100
Subject: ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit 181f817eaaca4c1f introduced some new code to entry-common.S
Sadly, this new code uses 'bx' instruction which is available only on
ARMv5 and higher CPUs. This causes following compilation errors when
building kernel for StrongARM (ARMv4):

arch/arm/kernel/entry-common.S: Assembler messages:
arch/arm/kernel/entry-common.S:129: Error: selected processor does not
 support `bx ip'
arch/arm/kernel/entry-common.S:138: Error: selected processor does not
 support `bx ip'

Fix these errors by using 'mov pc' instead of 'bx'.

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/entry-common.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 807cfebb0f4..825db52e558 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc)
 	cmp r0, r2
 	bne gnu_trace
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 gnu_trace:
 	ldr r1, [sp, #20]			@ lr of instrumented routine
@@ -135,7 +135,7 @@ gnu_trace:
 	mov lr, pc
 	mov pc, r2
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
-- 
cgit v1.2.3


From 828c09509b9695271bcbdc53e9fc9a6a737148d2 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 1 Oct 2009 15:43:56 -0700
Subject: const: constify remaining file_operations

[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/mach-ns9xxx/clock.c              | 2 +-
 arch/blackfin/mach-bf561/coreb.c          | 2 +-
 arch/cris/arch-v10/drivers/sync_serial.c  | 2 +-
 arch/cris/arch-v32/drivers/mach-fs/gpio.c | 2 +-
 arch/powerpc/kvm/timing.c                 | 2 +-
 arch/powerpc/platforms/cell/spufs/file.c  | 2 +-
 arch/powerpc/platforms/pseries/dtl.c      | 2 +-
 arch/x86/xen/debugfs.c                    | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index 44ed20d4a38..cf81cbc5754 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file)
 	return single_open(file, clk_debugfs_show, NULL);
 }
 
-static struct file_operations clk_debugfs_operations = {
+static const struct file_operations clk_debugfs_operations = {
 	.open = clk_debugfs_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 93635a766f9..1e60a92dd60 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -48,7 +48,7 @@ coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned l
 	return ret;
 }
 
-static struct file_operations coreb_fops = {
+static const struct file_operations coreb_fops = {
 	.owner   = THIS_MODULE,
 	.ioctl   = coreb_ioctl,
 };
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 6cc1a0319a5..562b9a7feae 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -244,7 +244,7 @@ static unsigned sync_serial_prescale_shadow;
 
 #define NUMBER_OF_PORTS 2
 
-static struct file_operations sync_serial_fops = {
+static const struct file_operations sync_serial_fops = {
 	.owner   = THIS_MODULE,
 	.write   = sync_serial_write,
 	.read    = sync_serial_read,
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
index fe1fde89388..d89ab80498e 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -855,7 +855,7 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
 	return 0;
 }
 
-struct file_operations gpio_fops = {
+static const struct file_operations gpio_fops = {
 	.owner       = THIS_MODULE,
 	.poll        = gpio_poll,
 	.ioctl       = gpio_ioctl,
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index 47ee603f558..2aa371e3007 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -201,7 +201,7 @@ static int kvmppc_exit_timing_open(struct inode *inode, struct file *file)
 	return single_open(file, kvmppc_exit_timing_show, inode->i_private);
 }
 
-static struct file_operations kvmppc_exit_timing_fops = {
+static const struct file_operations kvmppc_exit_timing_fops = {
 	.owner   = THIS_MODULE,
 	.open    = kvmppc_exit_timing_open,
 	.read    = seq_read,
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 96130944617..884e8bcec49 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -147,7 +147,7 @@ static int __fops ## _open(struct inode *inode, struct file *file)	\
 	__simple_attr_check_format(__fmt, 0ull);			\
 	return spufs_attr_open(inode, file, __get, __set, __fmt);	\
 }									\
-static struct file_operations __fops = {				\
+static const struct file_operations __fops = {				\
 	.owner	 = THIS_MODULE,						\
 	.open	 = __fops ## _open,					\
 	.release = spufs_attr_release,					\
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index ab69925d579..937a544a236 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -209,7 +209,7 @@ static ssize_t dtl_file_read(struct file *filp, char __user *buf, size_t len,
 	return n_read * sizeof(struct dtl_entry);
 }
 
-static struct file_operations dtl_fops = {
+static const struct file_operations dtl_fops = {
 	.open		= dtl_file_open,
 	.release	= dtl_file_release,
 	.read		= dtl_file_read,
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
index b53225d2cac..e133ce25e29 100644
--- a/arch/x86/xen/debugfs.c
+++ b/arch/x86/xen/debugfs.c
@@ -100,7 +100,7 @@ static int xen_array_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct file_operations u32_array_fops = {
+static const struct file_operations u32_array_fops = {
 	.owner	= THIS_MODULE,
 	.open	= u32_array_open,
 	.release= xen_array_release,
-- 
cgit v1.2.3


From a28b3dc90964ed961b6ed2c320885ab8b3a0a8ff Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 1 Oct 2009 15:43:57 -0700
Subject: revert "m68k: convert to asm-generic/hardirq.h"

Revert 45d80eea87c9f8292d2d33173d6866c0ec57238a ("m68k: convert to
asm-generic/hardirq.h") - it fails to compile due to an inclusion tangle:

In file included from include/linux/irq.h:12,
                 from include/asm-generic/hardirq.h:6,
                 from /usr/src/devel/arch/m68k/include/asm/hardirq_mm.h:6,
                 from /usr/src/devel/arch/m68k/include/asm/hardirq.h:4,
                 from include/linux/hardirq.h:10,
                 from /usr/src/devel/arch/m68k/include/asm/system_mm.h:69,
                 from /usr/src/devel/arch/m68k/include/asm/system.h:4,
                 from include/linux/list.h:7,
                 from include/linux/preempt.h:11,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:56,
                 from arch/m68k/kernel/asm-offsets.c:14:
include/linux/smp.h:17: error: field 'list' has incomplete type

Cc: Christoph Hellwig <hch@lst.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/include/asm/hardirq_mm.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h
index 554f65b6cd3..394ee946015 100644
--- a/arch/m68k/include/asm/hardirq_mm.h
+++ b/arch/m68k/include/asm/hardirq_mm.h
@@ -1,8 +1,16 @@
 #ifndef __M68K_HARDIRQ_H
 #define __M68K_HARDIRQ_H
 
-#define HARDIRQ_BITS	8
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
 
-#include <asm-generic/hardirq.h>
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
 
 #endif
-- 
cgit v1.2.3


From d22a001bf6a502e978a8617e3f297b4d762cfbb5 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 1 Oct 2009 15:44:01 -0700
Subject: mn10300: fix kernel build failures when using gcc-4.x

Fix some build failures when using gcc-4.x for MN10300.

Firstly, __get_user() fails to build because the pointer points to a const and
__gu_val ends up being read-only:

In file included from include/linux/mempolicy.h:62,
                 from init/main.c:50:
include/linux/pagemap.h: In function 'fault_in_pages_readable':
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:394: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
include/linux/pagemap.h:400: error: read-only variable '__gu_val' used as 'asm' output
make[1]: *** [init/main.o] Error 1

Secondly, gcc-4 doesn't allow casts of lvalues:

  UPD     include/linux/compile.h
arch/mn10300/kernel/rtc.c: In function 'calibrate_clock':
arch/mn10300/kernel/rtc.c:170: error: lvalue required as left operand of assignment
arch/mn10300/kernel/rtc.c:172: error: lvalue required as left operand of assignment
make[1]: *** [arch/mn10300/kernel/rtc.o] Error 1

These are seen with gcc 4.2.1.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/include/asm/uaccess.h             | 73 ++++++++++++++------------
 arch/mn10300/unit-asb2303/include/unit/clock.h |  6 +--
 arch/mn10300/unit-asb2305/include/unit/clock.h |  6 +--
 3 files changed, 45 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 8a3a4dd5576..167e10ff06d 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -129,42 +129,47 @@ extern int fixup_exception(struct pt_regs *regs);
 struct __large_struct { unsigned long buf[100]; };
 #define __m(x) (*(struct __large_struct *)(x))
 
-#define __get_user_nocheck(x, ptr, size)	\
-({						\
-	__typeof(*(ptr)) __gu_val;		\
-	unsigned long __gu_addr;		\
-	int __gu_err;				\
-	__gu_addr = (unsigned long) (ptr);	\
-	switch (size) {				\
-	case 1:  __get_user_asm("bu"); break;	\
-	case 2:  __get_user_asm("hu"); break;	\
-	case 4:  __get_user_asm(""  ); break;	\
-	default: __get_user_unknown(); break;	\
-	}					\
-	x = (__typeof__(*(ptr))) __gu_val;	\
-	__gu_err;				\
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	unsigned long __gu_addr;					\
+	int __gu_err;							\
+	__gu_addr = (unsigned long) (ptr);				\
+	switch (size) {							\
+	case 1: {							\
+		unsigned char __gu_val;					\
+		__get_user_asm("bu");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	case 2: {							\
+		unsigned short __gu_val;				\
+		__get_user_asm("hu");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	case 4: {							\
+		unsigned int __gu_val;					\
+		__get_user_asm("");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	default:							\
+		__get_user_unknown();					\
+		break;							\
+	}								\
+	__gu_err;							\
 })
 
-#define __get_user_check(x, ptr, size)			\
-({							\
-	__typeof__(*(ptr)) __gu_val;			\
-	unsigned long __gu_addr;			\
-	int __gu_err;					\
-	__gu_addr = (unsigned long) (ptr);		\
-	if (likely(__access_ok(__gu_addr,size))) {	\
-		switch (size) {				\
-		case 1:  __get_user_asm("bu"); break;	\
-		case 2:  __get_user_asm("hu"); break;	\
-		case 4:  __get_user_asm(""  ); break;	\
-		default: __get_user_unknown(); break;	\
-		}					\
-	}						\
-	else {						\
-		__gu_err = -EFAULT;			\
-		__gu_val = 0;				\
-	}						\
-	x = (__typeof__(*(ptr))) __gu_val;		\
-	__gu_err;					\
+#define __get_user_check(x, ptr, size)					\
+({									\
+	int _e;								\
+	if (likely(__access_ok((unsigned long) (ptr), (size))))		\
+		_e = __get_user_nocheck((x), (ptr), (size));		\
+	else {								\
+		_e = -EFAULT;						\
+		(x) = (__typeof__(x))0;					\
+	}								\
+	_e;								\
 })
 
 #define __get_user_asm(INSN)					\
diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h
index 8b450e920af..2a0bf79ab96 100644
--- a/arch/mn10300/unit-asb2303/include/unit/clock.h
+++ b/arch/mn10300/unit-asb2303/include/unit/clock.h
@@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk;	/* IOCLK (crystal speed) in HZ */
 extern unsigned long mn10300_iobclk;
 extern unsigned long mn10300_tsc_per_HZ;
 
-#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK		mn10300_ioclk
 /* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK	mn10300_iobclk */
 
 #else /* !CONFIG_MN10300_RTC */
 
@@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ;
 #define MN10300_TSCCLK		MN10300_IOCLK
 
 #ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ	mn10300_tsc_per_HZ
 #else /* !CONFIG_MN10300_RTC */
 #define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
 #endif /* !CONFIG_MN10300_RTC */
diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h
index 7d514841ffd..67be3f2eb18 100644
--- a/arch/mn10300/unit-asb2305/include/unit/clock.h
+++ b/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -20,9 +20,9 @@ extern unsigned long mn10300_ioclk;	/* IOCLK (crystal speed) in HZ */
 extern unsigned long mn10300_iobclk;
 extern unsigned long mn10300_tsc_per_HZ;
 
-#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK		mn10300_ioclk
 /* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK	mn10300_iobclk */
 
 #else /* !CONFIG_MN10300_RTC */
 
@@ -35,7 +35,7 @@ extern unsigned long mn10300_tsc_per_HZ;
 #define MN10300_TSCCLK		MN10300_IOCLK
 
 #ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ	mn10300_tsc_per_HZ
 #else /* !CONFIG_MN10300_RTC */
 #define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
 #endif /* !CONFIG_MN10300_RTC */
-- 
cgit v1.2.3


From 392d814daf460a9564d29b2cebc51e1ea34e0504 Mon Sep 17 00:00:00 2001
From: Samuel Thibault <samuel.thibault@ens-lyon.org>
Date: Thu, 1 Oct 2009 15:44:02 -0700
Subject: x86: fix csum_ipv6_magic asm memory clobber

Just like ip_fast_csum, the assembly snippet in csum_ipv6_magic needs a
memory clobber, as it is only passed the address of the buffer, not a
memory reference to the buffer itself.

This caused failures in Hurd's pfinetv4 when we tried to compile it with
gcc-4.3 (bogus checksums).

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: "David S. Miller" <davem@davemloft.net>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/include/asm/checksum_32.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h
index 7c5ef8b14d9..46fc474fd81 100644
--- a/arch/x86/include/asm/checksum_32.h
+++ b/arch/x86/include/asm/checksum_32.h
@@ -161,7 +161,8 @@ static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 	    "adcl $0, %0	;\n"
 	    : "=&r" (sum)
 	    : "r" (saddr), "r" (daddr),
-	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+	    : "memory");
 
 	return csum_fold(sum);
 }
-- 
cgit v1.2.3


From 26f14947dbf31d60d1a67eee837a6d28c1e8830d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 1 Oct 2009 15:44:18 -0700
Subject: s3cmci: Kconfig selection for PIO/DMA/Both

Add a selection for the data transfer mode of the s3cmci driver, allowing
for either a configuration or rumtime selection of the use of the DMA or
PIO transfer code.

The PIO only mode is 476 bytes smaller than the driver with both methods
compiled in.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-s3c24xx/include/plat/mci.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 2d0852ac3b2..f1bd6d4198d 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -4,6 +4,7 @@
 struct s3c24xx_mci_pdata {
 	unsigned int	wprotect_invert : 1;
 	unsigned int	detect_invert : 1;   /* set => detect active high. */
+	unsigned int	use_dma : 1;
 
 	unsigned int	gpio_detect;
 	unsigned int	gpio_wprotect;
-- 
cgit v1.2.3


From 00acfaeead211562cc5f88882c47bf1cb16c041a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 1 Oct 2009 15:44:21 -0700
Subject: s3cmci: add better support for no card detect or write protect
 available

Add better support for omitting either the card detect or the write
protect GPIOs if the board does not support it.  Add the fields
no_wprotect and no_detect to the platform data which when set indicate the
absence of the respective GPIOs.

Note, this also fixes a minor bug where it tries to free IRQ0 if there is
no detect gpio available.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-s3c24xx/include/plat/mci.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index f1bd6d4198d..c2cef613968 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -2,6 +2,8 @@
 #define _ARCH_MCI_H
 
 struct s3c24xx_mci_pdata {
+	unsigned int	no_wprotect : 1;
+	unsigned int	no_detect : 1;
 	unsigned int	wprotect_invert : 1;
 	unsigned int	detect_invert : 1;   /* set => detect active high. */
 	unsigned int	use_dma : 1;
-- 
cgit v1.2.3


From 0a4bc5e89cfc3cc3083acef130cd8b670ee56914 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 29 Sep 2009 23:49:02 +0100
Subject: ARM: 5735/1: sa1111: CodingStyle cleanups

EXPORT_* macros should follow immediately after the closing function
brace line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/sa1111.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index ef12794c3c6..8ba7044c554 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip);
 }
+EXPORT_SYMBOL(sa1111_pll_clock);
 
 /**
  *	sa1111_select_audio_mode - select I2S or AC link mode
@@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_select_audio_mode);
 
 /**
  *	sa1111_set_audio_rate - set the audio sample rate
@@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
 
 	return 0;
 }
+EXPORT_SYMBOL(sa1111_set_audio_rate);
 
 /**
  *	sa1111_get_audio_rate - get the audio sample rate
@@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip) / (256 * div);
 }
+EXPORT_SYMBOL(sa1111_get_audio_rate);
 
 void sa1111_set_io_dir(struct sa1111_dev *sadev,
 		       unsigned int bits, unsigned int dir,
@@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io_dir);
 
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io);
 
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_sleep_io);
 
 /*
  * Individual device operations.
@@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_enable_device);
 
 /**
  *	sa1111_disable_device - disable an on-chip SA1111 function block
@@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_disable_device);
 
 /*
  *	SA1111 "Register Access Bus."
@@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = {
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
 };
+EXPORT_SYMBOL(sa1111_bus_type);
 
 int sa1111_driver_register(struct sa1111_driver *driver)
 {
 	driver->drv.bus = &sa1111_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_register);
 
 void sa1111_driver_unregister(struct sa1111_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_unregister);
 
 static int __init sa1111_init(void)
 {
@@ -1290,16 +1302,3 @@ module_exit(sa1111_exit);
 
 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-EXPORT_SYMBOL(sa1111_set_io_dir);
-EXPORT_SYMBOL(sa1111_set_io);
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-EXPORT_SYMBOL(sa1111_enable_device);
-EXPORT_SYMBOL(sa1111_disable_device);
-EXPORT_SYMBOL(sa1111_pll_clock);
-EXPORT_SYMBOL(sa1111_bus_type);
-EXPORT_SYMBOL(sa1111_driver_register);
-EXPORT_SYMBOL(sa1111_driver_unregister);
-- 
cgit v1.2.3


From 31abdb744179159f8b605f56da5b197b188e1689 Mon Sep 17 00:00:00 2001
From: David Brown <davidb@codeaurora.org>
Date: Thu, 1 Oct 2009 17:43:29 +0100
Subject: ARM: 5739/1: ARM: allow empty ATAG_CORE

From: David Brown <davidb@quicinc.com>

The ATAG_CORE is allowed to be empty.  Although this is handled
by parse_tag_core(), __vet_atags during startup rejects this tag
unless it contains data.  Allow the initial tag to be either the
full size, or empty.

Signed-off-by: David Brown <davidb@quicinc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/head-common.S | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 93ad576b2d7..885a7214418 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -13,6 +13,7 @@
 
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
 	.align	2
 	.type	__switch_data, %object
@@ -251,7 +252,8 @@ __vet_atags:
 	bne	1f
 
 	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-	subs	r5, r5, #ATAG_CORE_SIZE
+	cmp	r5, #ATAG_CORE_SIZE
+	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
 	bne	1f
 	ldr	r5, [r2, #4]
 	ldr	r6, =ATAG_CORE
-- 
cgit v1.2.3


From 6806bfe18fca92e2001538b84cab5f63c5ea4bed Mon Sep 17 00:00:00 2001
From: Greg Ungerer <gerg@snapgear.com>
Date: Fri, 2 Oct 2009 00:45:28 +0100
Subject: ARM: 5740/1: fix valid_phys_addr_range() range check

Commit 1522ac3ec95ff0230e7aa516f86b674fdf72866c
("Fix virtual to physical translation macro corner cases")
breaks the end of memory check in valid_phys_addr_range().
The modified expression results in the apparent /dev/mem size
being 2 bytes smaller than what it actually is.

This patch reworks the expression to correctly check the address,
while maintaining use of a valid address to __pa().

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f7457fea6de..2b7996401b0 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size >= __pa(high_memory - 1))
+	if (addr + size > __pa(high_memory - 1) + 1)
 		return 0;
 
 	return 1;
-- 
cgit v1.2.3


From 4fb2847437d871fe579f820ceb18031db3359901 Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Fri, 25 Sep 2009 13:39:47 +0100
Subject: ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()

Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.

Now we have three prefetch abort model:

  * legacy - for CPUs before ARMv6. They doesn't provide neither
    IFSR nor IFAR. We simulate IFSR with section translation fault
    status for them to generalize code;
  * ARMv6 - provides IFSR, but not IFAR;
  * ARMv7 - provides both IFSR and IFAR.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/glue.h    | 26 ++++++++++++++-----
 arch/arm/kernel/entry-armv.S   | 18 +++++--------
 arch/arm/kernel/entry-common.S |  7 ------
 arch/arm/mm/Kconfig            | 57 ++++++++++++++++++++++--------------------
 arch/arm/mm/Makefile           |  4 +++
 arch/arm/mm/fault.c            |  2 +-
 arch/arm/mm/pabort-legacy.S    | 19 ++++++++++++++
 arch/arm/mm/pabort-v6.S        | 19 ++++++++++++++
 arch/arm/mm/pabort-v7.S        | 20 +++++++++++++++
 arch/arm/mm/proc-arm1020.S     |  2 +-
 arch/arm/mm/proc-arm1020e.S    |  2 +-
 arch/arm/mm/proc-arm1022.S     |  2 +-
 arch/arm/mm/proc-arm1026.S     |  2 +-
 arch/arm/mm/proc-arm6_7.S      |  4 +--
 arch/arm/mm/proc-arm720.S      |  2 +-
 arch/arm/mm/proc-arm740.S      |  2 +-
 arch/arm/mm/proc-arm7tdmi.S    |  2 +-
 arch/arm/mm/proc-arm920.S      |  2 +-
 arch/arm/mm/proc-arm922.S      |  2 +-
 arch/arm/mm/proc-arm925.S      |  2 +-
 arch/arm/mm/proc-arm926.S      |  2 +-
 arch/arm/mm/proc-arm940.S      |  2 +-
 arch/arm/mm/proc-arm946.S      |  2 +-
 arch/arm/mm/proc-arm9tdmi.S    |  2 +-
 arch/arm/mm/proc-fa526.S       |  2 +-
 arch/arm/mm/proc-feroceon.S    |  2 +-
 arch/arm/mm/proc-mohawk.S      |  2 +-
 arch/arm/mm/proc-sa110.S       |  2 +-
 arch/arm/mm/proc-sa1100.S      |  2 +-
 arch/arm/mm/proc-v6.S          |  2 +-
 arch/arm/mm/proc-v7.S          |  2 +-
 arch/arm/mm/proc-xsc3.S        |  2 +-
 arch/arm/mm/proc-xscale.S      |  2 +-
 33 files changed, 144 insertions(+), 78 deletions(-)
 create mode 100644 arch/arm/mm/pabort-legacy.S
 create mode 100644 arch/arm/mm/pabort-v6.S
 create mode 100644 arch/arm/mm/pabort-v7.S

(limited to 'arch')

diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index a0e39d5d00c..234a3fc1c78 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -120,25 +120,39 @@
 #endif
 
 /*
- * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
+ *	Prefetch Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  legacy	- no IFSR, no IFAR
+ *	  v6		- ARMv6: IFSR, no IFAR
+ *	  v7		- ARMv7: IFSR and IFAR
  */
+
 #undef CPU_PABORT_HANDLER
 #undef MULTI_PABORT
 
-#ifdef CONFIG_CPU_PABRT_IFAR
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+#  define CPU_PABORT_HANDLER v6_pabort
 # endif
 #endif
 
-#ifdef CONFIG_CPU_PABRT_NOIFAR
+#ifdef CONFIG_CPU_PABRT_V7
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+#  define CPU_PABORT_HANDLER v7_pabort
 # endif
 #endif
 
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0a2ba51cf35..322410be573 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -311,22 +311,16 @@ __pabt_svc:
 	tst	r3, #PSR_I_BIT
 	biceq	r9, r9, #PSR_I_BIT
 
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	msr	cpsr_c, r9			@ Maybe enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
 	@
@@ -701,16 +695,16 @@ ENDPROC(__und_usr_unknown)
 __pabt_usr:
 	usr_entry
 
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	enable_irq				@ Enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
  UNWIND(.fnend		)
 	/* fall through */
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 825db52e558..f0fe95b7085 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -425,13 +425,6 @@ sys_mmap2:
 #endif
 ENDPROC(sys_mmap2)
 
-ENTRY(pabort_ifar)
-		mrc	p15, 0, r0, cr6, cr0, 2
-ENTRY(pabort_noifar)
-		mov	pc, lr
-ENDPROC(pabort_ifar)
-ENDPROC(pabort_noifar)
-
 #ifdef CONFIG_OABI_COMPAT
 
 /*
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 8d43e58f924..e993140edd8 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -17,7 +17,7 @@ config CPU_ARM610
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  The ARM610 is the successor to the ARM3 processor
 	  and was produced by VLSI Technology Inc.
@@ -31,7 +31,7 @@ config CPU_ARM7TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
@@ -49,7 +49,7 @@ config CPU_ARM710
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
 	  designed by Advanced RISC Machines Ltd. The ARM710 is the
@@ -64,7 +64,7 @@ config CPU_ARM720T
 	bool "Support ARM720T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -83,7 +83,7 @@ config CPU_ARM740T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V3	# although the core is v4t
 	select CPU_CP15_MPU
 	help
@@ -100,7 +100,7 @@ config CPU_ARM9TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM9 processor core
@@ -114,7 +114,7 @@ config CPU_ARM920T
 	bool "Support ARM920T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -135,7 +135,7 @@ config CPU_ARM922T
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -154,7 +154,7 @@ config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -173,7 +173,7 @@ config CPU_ARM926T
 	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
@@ -191,7 +191,7 @@ config CPU_FA526
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_CACHE_FA
@@ -210,7 +210,7 @@ config CPU_ARM940T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -228,7 +228,7 @@ config CPU_ARM946E
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -244,7 +244,7 @@ config CPU_ARM1020
 	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -262,7 +262,7 @@ config CPU_ARM1020E
 	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -275,7 +275,7 @@ config CPU_ARM1022
 	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -293,7 +293,7 @@ config CPU_ARM1026
 	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -311,7 +311,7 @@ config CPU_SA110
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -331,7 +331,7 @@ config CPU_SA1100
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -342,7 +342,7 @@ config CPU_XSCALE
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -352,7 +352,7 @@ config CPU_XSC3
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -363,7 +363,7 @@ config CPU_MOHAWK
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -374,7 +374,7 @@ config CPU_FEROCEON
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_FEROCEON if MMU
@@ -394,7 +394,7 @@ config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -420,7 +420,7 @@ config CPU_V7
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
-	select CPU_PABRT_IFAR
+	select CPU_PABRT_V7
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -482,10 +482,13 @@ config CPU_ABRT_EV6
 config CPU_ABRT_EV7
 	bool
 
-config CPU_PABRT_IFAR
+config CPU_PABRT_LEGACY
 	bool
 
-config CPU_PABRT_NOIFAR
+config CPU_PABRT_V6
+	bool
+
+config CPU_PABRT_V7
 	bool
 
 # The cache model
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 63e3f6dd0e2..055cb2aa813 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -27,6 +27,10 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ)	+= abort-ev5tj.o
 obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
 obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
 
+obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
+obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
+obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
+
 obj-$(CONFIG_CPU_CACHE_V3)	+= cache-v3.o
 obj-$(CONFIG_CPU_CACHE_V4)	+= cache-v4.o
 obj-$(CONFIG_CPU_CACHE_V4WT)	+= cache-v4wt.o
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 379f7855605..fd2375f8499 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -520,7 +520,7 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 }
 
 asmlinkage void __exception
-do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
+do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
 	do_translation_fault(addr, FSR_LNX_PF, regs);
 }
diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S
new file mode 100644
index 00000000000..87970eba88e
--- /dev/null
+++ b/arch/arm/mm/pabort-legacy.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: legacy_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = Simulated IFSR with section translation fault status
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(legacy_pabort)
+	mov	r1, #5
+	mov	pc, lr
+ENDPROC(legacy_pabort)
diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S
new file mode 100644
index 00000000000..06e3d1ef211
--- /dev/null
+++ b/arch/arm/mm/pabort-v6.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v6_pabort)
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v6_pabort)
diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S
new file mode 100644
index 00000000000..a8b3b300a18
--- /dev/null
+++ b/arch/arm/mm/pabort-v7.S
@@ -0,0 +1,20 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v7_pabort)
+	mrc	p15, 0, r0, c6, c0, 2		@ get IFAR
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v7_pabort)
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index b5551bf010a..d9fb4b98c49 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -449,7 +449,7 @@ arm1020_crval:
 	.type	arm1020_processor_functions, #object
 arm1020_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020_proc_init
 	.word	cpu_arm1020_proc_fin
 	.word	cpu_arm1020_reset
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 8bc6740c29e..7453b75dcea 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -430,7 +430,7 @@ arm1020e_crval:
 	.type	arm1020e_processor_functions, #object
 arm1020e_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020e_proc_init
 	.word	cpu_arm1020e_proc_fin
 	.word	cpu_arm1020e_reset
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 2cd03e66c0a..8eb72d75a8b 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -413,7 +413,7 @@ arm1022_crval:
 	.type	arm1022_processor_functions, #object
 arm1022_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1022_proc_init
 	.word	cpu_arm1022_proc_fin
 	.word	cpu_arm1022_reset
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index ad961a897f6..3b59f0d6713 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -408,7 +408,7 @@ arm1026_crval:
 	.type	arm1026_processor_functions, #object
 arm1026_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1026_proc_init
 	.word	cpu_arm1026_proc_fin
 	.word	cpu_arm1026_reset
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 80d6e1de069..3f9cd3d8f6d 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -278,7 +278,7 @@ __arm7_setup:	mov	r0, #0
 		.type	arm6_processor_functions, #object
 ENTRY(arm6_processor_functions)
 		.word	cpu_arm6_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm6_proc_init
 		.word	cpu_arm6_proc_fin
 		.word	cpu_arm6_reset
@@ -295,7 +295,7 @@ ENTRY(arm6_processor_functions)
 		.type	arm7_processor_functions, #object
 ENTRY(arm7_processor_functions)
 		.word	cpu_arm7_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7_proc_init
 		.word	cpu_arm7_proc_fin
 		.word	cpu_arm7_reset
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 85ae18695f1..0b62de24466 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -181,7 +181,7 @@ arm720_crval:
 		.type	arm720_processor_functions, #object
 ENTRY(arm720_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm720_proc_init
 		.word	cpu_arm720_proc_fin
 		.word	cpu_arm720_reset
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 4f95bee63e9..01860cdeb2e 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -126,7 +126,7 @@ __arm740_setup:
 	.type	arm740_processor_functions, #object
 ENTRY(arm740_processor_functions)
 	.word	v4t_late_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm740_proc_init
 	.word	cpu_arm740_proc_fin
 	.word	cpu_arm740_reset
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 93e05fa7bed..1201b986382 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -64,7 +64,7 @@ __arm7tdmi_setup:
 		.type	arm7tdmi_processor_functions, #object
 ENTRY(arm7tdmi_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7tdmi_proc_init
 		.word	cpu_arm7tdmi_proc_fin
 		.word	cpu_arm7tdmi_reset
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 914d688394f..2b7c197cc58 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -395,7 +395,7 @@ arm920_crval:
 	.type	arm920_processor_functions, #object
 arm920_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm920_proc_init
 	.word	cpu_arm920_proc_fin
 	.word	cpu_arm920_reset
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 51c9c9859e5..06a1aa4e339 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -399,7 +399,7 @@ arm922_crval:
 	.type	arm922_processor_functions, #object
 arm922_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm922_proc_init
 	.word	cpu_arm922_proc_fin
 	.word	cpu_arm922_reset
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 2724526d89c..cb53435a85a 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -462,7 +462,7 @@ arm925_crval:
 	.type	arm925_processor_functions, #object
 arm925_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm925_proc_init
 	.word	cpu_arm925_proc_fin
 	.word	cpu_arm925_reset
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 54466937bff..1c4848704bb 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -415,7 +415,7 @@ arm926_crval:
 	.type	arm926_processor_functions, #object
 arm926_processor_functions:
 	.word	v5tj_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm926_proc_init
 	.word	cpu_arm926_proc_fin
 	.word	cpu_arm926_reset
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index f595117caf5..5b0f8464c8f 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -322,7 +322,7 @@ __arm940_setup:
 	.type	arm940_processor_functions, #object
 ENTRY(arm940_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm940_proc_init
 	.word	cpu_arm940_proc_fin
 	.word	cpu_arm940_reset
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index e03f6ff1fb2..40c0449a139 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -377,7 +377,7 @@ __arm946_setup:
 	.type	arm946_processor_functions, #object
 ENTRY(arm946_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm946_proc_init
 	.word	cpu_arm946_proc_fin
 	.word	cpu_arm946_reset
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index be6c11d2b3f..28545c29dbc 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -64,7 +64,7 @@ __arm9tdmi_setup:
 		.type	arm9tdmi_processor_functions, #object
 ENTRY(arm9tdmi_processor_functions)
 		.word	nommu_early_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm9tdmi_proc_init
 		.word	cpu_arm9tdmi_proc_fin
 		.word	cpu_arm9tdmi_reset
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 08b8a955d5d..08f5ac237ad 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -191,7 +191,7 @@ fa526_cr1_set:
 	.type	fa526_processor_functions, #object
 fa526_processor_functions:
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_fa526_proc_init
 	.word	cpu_fa526_proc_fin
 	.word	cpu_fa526_reset
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 0fe1f8fc348..d0d7795200f 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -499,7 +499,7 @@ feroceon_crval:
 	.type	feroceon_processor_functions, #object
 feroceon_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_feroceon_proc_init
 	.word	cpu_feroceon_proc_fin
 	.word	cpu_feroceon_reset
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 540f5078496..52b5fd74fbb 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -359,7 +359,7 @@ mohawk_crval:
 	.type	mohawk_processor_functions, #object
 mohawk_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_mohawk_proc_init
 	.word	cpu_mohawk_proc_fin
 	.word	cpu_mohawk_reset
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 90a7e5279f2..7b706b38990 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -199,7 +199,7 @@ sa110_crval:
 	.type	sa110_processor_functions, #object
 ENTRY(sa110_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa110_proc_init
 	.word	cpu_sa110_proc_fin
 	.word	cpu_sa110_reset
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 451e2d953e2..ee7700242c1 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -214,7 +214,7 @@ sa1100_crval:
 	.type	sa1100_processor_functions, #object
 ENTRY(sa1100_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa1100_proc_init
 	.word	cpu_sa1100_proc_fin
 	.word	cpu_sa1100_reset
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 524ddae9259..194737d60a2 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -191,7 +191,7 @@ v6_crval:
 	.type	v6_processor_functions, #object
 ENTRY(v6_processor_functions)
 	.word	v6_early_abort
-	.word	pabort_noifar
+	.word	v6_pabort
 	.word	cpu_v6_proc_init
 	.word	cpu_v6_proc_fin
 	.word	cpu_v6_reset
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index f3fa1c32fe9..23ebcf6eab9 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -295,7 +295,7 @@ __v7_setup_stack:
 	.type	v7_processor_functions, #object
 ENTRY(v7_processor_functions)
 	.word	v7_early_abort
-	.word	pabort_ifar
+	.word	v7_pabort
 	.word	cpu_v7_proc_init
 	.word	cpu_v7_proc_fin
 	.word	cpu_v7_reset
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 33515c214b9..2028f370288 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -428,7 +428,7 @@ xsc3_crval:
 	.type	xsc3_processor_functions, #object
 ENTRY(xsc3_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xsc3_proc_init
 	.word	cpu_xsc3_proc_fin
 	.word	cpu_xsc3_reset
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 423394260bc..f056c283682 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -511,7 +511,7 @@ xscale_crval:
 	.type	xscale_processor_functions, #object
 ENTRY(xscale_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xscale_proc_init
 	.word	cpu_xscale_proc_fin
 	.word	cpu_xscale_reset
-- 
cgit v1.2.3


From d25ef8b86e6a58f5476bf6e4a8da730b335f68fa Mon Sep 17 00:00:00 2001
From: "Kirill A. Shutemov" <kirill@shutemov.name>
Date: Fri, 25 Sep 2009 13:40:49 +0100
Subject: ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7

Currently, on ARMv6 and ARMv7, if an application tries to execute
code (or garbage) on non-executable page it hangs. It caused by
incorrect prefetch abort handling. Now every prefetch abort
processes as a translation fault.

To fix this we have to analyze instruction fault status register
to figure out reason why we've got the abort and process it
accordingly.

To make IFSR different from DFSR we set bit 31 which is reserved in
both IFSR and DFSR.

This patch also tries to protect from future hangs on unexpected
exceptions. An application will be killed if unexpected exception
type was received.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/fault.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index fd2375f8499..ae0e25f5a70 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -519,9 +519,58 @@ do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, fsr, 0);
 }
 
+
+static struct fsr_info ifsr_info[] = {
+	{ do_bad,		SIGBUS,  0,		"unknown 0"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 1"			   },
+	{ do_bad,		SIGBUS,  0,		"debug event"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section access flag fault"	   },
+	{ do_bad,		SIGBUS,  0,		"unknown 4"			   },
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page access flag fault"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 10"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 20"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 22"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 24"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
+};
+
 asmlinkage void __exception
 do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
-	do_translation_fault(addr, FSR_LNX_PF, regs);
+	const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
+	struct siginfo info;
+
+	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
+		return;
+
+	printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
+		inf->name, ifsr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code  = inf->code;
+	info.si_addr  = (void __user *)addr;
+	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
-- 
cgit v1.2.3


From 2cff5e1a83c61613febf814640dc877b98d585e6 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Tue, 11 Aug 2009 23:12:41 +0900
Subject: m32r: fix tme_handler

Fix pmd_bad check code of tme_handler (TLB Miss Exception handler).
The correct _KERNPG_TABLE value is not 0x263(=611) but 0x163.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/mm/mmu.S | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/mm/mmu.S b/arch/m32r/mm/mmu.S
index 49a6d16a3d5..e9491a5ae82 100644
--- a/arch/m32r/mm/mmu.S
+++ b/arch/m32r/mm/mmu.S
@@ -150,9 +150,13 @@ ENTRY(tme_handler)
 
 	; pmd = pmd_offset(pgd, address);
 	ld	r3, @r3			; r3: pmd data
-	ldi	r2, #-4096
 	beqz	r3, 3f			; pmd_none(*pmd) ?
 
+	and3	r2, r3, #0xfff
+	add3	r2, r2, #-355		; _KERNPG_TABLE(=0x163)
+	bnez	r2, 3f			; pmd_bad(*pmd) ?
+	ldi	r2, #-4096
+
 	; pte = pte_offset(pmd, address);
 	and	r2, r3			; r2: pte base addr
 	srl3	r3, r0, #10
@@ -263,9 +267,9 @@ ENTRY(tme_handler)
 	ld	r1, @r3			; r1: pmd
 	beqz	r1, 3f			; pmd_none(*pmd) ?
 ;
-	and3	r1, r1, #0xeff
-	ldi	r4, #611		; _KERNPG_TABLE(=611)
-	bne	r1, r4, 3f		; !pmd_bad(*pmd) ?
+	and3	r1, r1, #0x3ff
+	ldi	r4, #0x163		; _KERNPG_TABLE(=0x163)
+	bne	r1, r4, 3f		; pmd_bad(*pmd) ?
 
 	.fillinsn
 4:
-- 
cgit v1.2.3


From ced0f005c7b0a7e751b2d15ea502a7654ddb3630 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Wed, 26 Aug 2009 13:09:12 +0900
Subject: m32r: export delay loop symbols

- Move EXPORT_SYMBOL lines of delay loop functions
  from arch/m32r/kernel/m32r_ksyms.c to arch/m32r/lib/delay.c.
- Export __ndelay.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/m32r_ksyms.c | 6 ------
 arch/m32r/lib/delay.c         | 4 ++++
 2 files changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 22624b51d4d..700570747a9 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -23,12 +23,6 @@ EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(iounmap);
 EXPORT_SYMBOL(kernel_thread);
 
-/* Networking helper routines. */
-/* Delay loops */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-
 EXPORT_SYMBOL(strncpy_from_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(clear_user);
diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c
index ced549be80f..940f4837e42 100644
--- a/arch/m32r/lib/delay.c
+++ b/arch/m32r/lib/delay.c
@@ -122,4 +122,8 @@ void __ndelay(unsigned long nsecs)
 {
 	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
 }
+
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
-- 
cgit v1.2.3


From d2c5821c5de08175096f17166984d5e738cad024 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Wed, 26 Aug 2009 13:04:33 +0900
Subject: m32r: define ioread* and iowrite* macros

Define ioread* and iowrite* macros to fix the following build errors:

  CC [M]  drivers/uio/uio_smx.o
drivers/uio/uio_smx.c: In function 'smx_handler':
drivers/uio/uio_smx.c:31: error: implicit declaration of function 'ioread32'
drivers/uio/uio_smx.c:37: error: implicit declaration of function 'iowrite32'

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/include/asm/io.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h
index d06933bd631..4010f1fc5b6 100644
--- a/arch/m32r/include/asm/io.h
+++ b/arch/m32r/include/asm/io.h
@@ -162,6 +162,13 @@ static inline void _writel(unsigned long l, unsigned long addr)
 #define __raw_writew writew
 #define __raw_writel writel
 
+#define ioread8 read
+#define ioread16 readw
+#define ioread32 readl
+#define iowrite8 writeb
+#define iowrite16 writew
+#define iowrite32 writel
+
 #define mmiowb()
 
 #define flush_write_buffers() do { } while (0)  /* M32R_FIXME */
-- 
cgit v1.2.3


From bac33bd571a9c2969efb52dd02c5407fbc49c360 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Wed, 26 Aug 2009 13:13:12 +0900
Subject: m32r: add rtc_lock variable

Add a spinlock variable "rtc_lock".
This is taken from arch/arm/kernel/time.c.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/time.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index ba61c4c7320..e7fee0f198d 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -33,6 +33,15 @@
 
 #include <asm/hw_irq.h>
 
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+/* this needs a better home */
+DEFINE_SPINLOCK(rtc_lock);
+
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
+EXPORT_SYMBOL(rtc_lock);
+#endif
+#endif  /* pc-style 'CMOS' RTC support */
+
 #ifdef CONFIG_SMP
 extern void smp_local_timer_interrupt(void);
 #endif
-- 
cgit v1.2.3


From 6b6fabce5ac47668a2c2d9a14f1cdcc23c4ed896 Mon Sep 17 00:00:00 2001
From: Hirokazu Takata <takata@linux-m32r.org>
Date: Wed, 23 Sep 2009 21:37:06 +0900
Subject: m32r: Fix set_memory() for DISCONTIGMEM

In case CONFIG_DISCONTIGMEM is set, the memory size of system was
always determined by CONFIG_MEMORY_SIZE and was not changeable.

This patch fixes set_memory() of arch/m32r/mm/discontig.c so that
we can specify memory size by the "mem=<size>" kernel parameter.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/mm/discontig.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index b7a78ad429b..5d2858f6eed 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -32,6 +32,9 @@ typedef struct {
 } mem_prof_t;
 static mem_prof_t mem_prof[MAX_NUMNODES];
 
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
 static void __init mem_prof_init(void)
 {
 	unsigned long start_pfn, holes, free_pfn;
@@ -42,7 +45,7 @@ static void __init mem_prof_init(void)
 	/* Node#0 SDRAM */
 	mp = &mem_prof[0];
 	mp->start_pfn = PFN_UP(CONFIG_MEMORY_START);
-	mp->pages = PFN_DOWN(CONFIG_MEMORY_SIZE);
+	mp->pages = PFN_DOWN(memory_end - memory_start);
 	mp->holes = 0;
 	mp->free_pfn = PFN_UP(__pa(_end));
 
-- 
cgit v1.2.3


From 0a3d31b79e7fa600108e699805e2b2f9ea1f3194 Mon Sep 17 00:00:00 2001
From: Toshihiro HANAWA <hanawa@ccs.tsukuba.ac.jp>
Date: Fri, 2 Oct 2009 17:52:54 +0900
Subject: m32r: Fix IPI function calls for SMP

This patch fixes the m32r SMP kernel after 2.6.27.

A part of the following patch breaks m32r SMP operation.
> m32r: convert to generic helpers for IPI function calls
> commit 7b7426c8a615cf61df9a77b9df7d5b75d91e3fa0

In the above patch, a CALL_FUNC_SINGLE_IPI was newly introduced,
but the its IPI vector number was wrong in the patch code.

The m32r SMP kernel hanged-up during boot operation, because
the CPU_BOOT_IPI was called instead of CALL_FUNC_SINGLE_IPI
(CPU_BOOT_IPI had no side effect at that time because the 2nd
core had already been started up),
as a result, csd_unlock() was not called, then a dead lock
occurred in csd_lock_wait() after the detection of Compact Flash
memory as IDE generic disk.

Signed-off-by: Toshihiro HANAWA <hanawa@ccs.tsukuba.ac.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
---
 arch/m32r/kernel/traps.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 03b14e55cd8..fbd109031df 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -104,8 +104,8 @@ static void set_eit_vector_entries(void)
 	eit_vector[186] = (unsigned long)smp_call_function_interrupt;
 	eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
 	eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
-	eit_vector[189] = (unsigned long)smp_call_function_single_interrupt;
-	eit_vector[190] = 0;
+	eit_vector[189] = 0;	/* CPU_BOOT_IPI */
+	eit_vector[190] = (unsigned long)smp_call_function_single_interrupt;
 	eit_vector[191] = 0;
 #endif
 	_flush_cache_copyback_all();
-- 
cgit v1.2.3